WorldWideScience

Sample records for program advanced

  1. Advanced General Dentistry Program.

    Science.gov (United States)

    Barnes, Douglas M.; And Others

    1988-01-01

    A description of the University of Maryland at Baltimore's one-year postdoctoral program in advanced general dentistry focuses on its goals and objectives, curriculum design, patient population, faculty and staff, finances, and program evaluation measures. (MSE)

  2. ADVANCED TURBINE SYSTEMS PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Gregory Gaul

    2004-04-21

    Natural gas combustion turbines are rapidly becoming the primary technology of choice for generating electricity. At least half of the new generating capacity added in the US over the next twenty years will be combustion turbine systems. The Department of Energy has cosponsored with Siemens Westinghouse, a program to maintain the technology lead in gas turbine systems. The very ambitious eight year program was designed to demonstrate a highly efficient and commercially acceptable power plant, with the ability to fire a wide range of fuels. The main goal of the Advanced Turbine Systems (ATS) Program was to develop ultra-high efficiency, environmentally superior and cost effective competitive gas turbine systems for base load application in utility, independent power producer and industrial markets. Performance targets were focused on natural gas as a fuel and included: System efficiency that exceeds 60% (lower heating value basis); Less than 10 ppmv NO{sub x} emissions without the use of post combustion controls; Busbar electricity that are less than 10% of state of the art systems; Reliability-Availability-Maintainability (RAM) equivalent to current systems; Water consumption minimized to levels consistent with cost and efficiency goals; and Commercial systems by the year 2000. In a parallel effort, the program was to focus on adapting the ATS engine to coal-derived or biomass fuels. In Phase 1 of the ATS Program, preliminary investigators on different gas turbine cycles demonstrated that net plant LHV based efficiency greater than 60% was achievable. In Phase 2 the more promising cycles were evaluated in greater detail and the closed-loop steam-cooled combined cycle was selected for development because it offered the best solution with least risk for achieving the ATS Program goals for plant efficiency, emissions, cost of electricity and RAM. Phase 2 also involved conceptual ATS engine and plant design and technology developments in aerodynamics, sealing

  3. ADVANCED TURBINE SYSTEMS PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Sy Ali

    2002-03-01

    The market for power generation equipment is undergoing a tremendous transformation. The traditional electric utility industry is restructuring, promising new opportunities and challenges for all facilities to meet their demands for electric and thermal energy. Now more than ever, facilities have a host of options to choose from, including new distributed generation (DG) technologies that are entering the market as well as existing DG options that are improving in cost and performance. The market is beginning to recognize that some of these users have needs beyond traditional grid-based power. Together, these changes are motivating commercial and industrial facilities to re-evaluate their current mix of energy services. One of the emerging generating options is a new breed of advanced fuel cells. While there are a variety of fuel cell technologies being developed, the solid oxide fuel cells (SOFC) and molten carbonate fuel cells (MCFC) are especially promising, with their electric efficiency expected around 50-60 percent and their ability to generate either hot water or high quality steam. In addition, they both have the attractive characteristics of all fuel cells--relatively small siting footprint, rapid response to changing loads, very low emissions, quiet operation, and an inherently modular design lending itself to capacity expansion at predictable unit cost with reasonably short lead times. The objectives of this project are to:(1) Estimate the market potential for high efficiency fuel cell hybrids in the U.S.;(2) Segment market size by commercial, industrial, and other key markets;(3) Identify and evaluate potential early adopters; and(4) Develop results that will help prioritize and target future R&D investments. The study focuses on high efficiency MCFC- and SOFC-based hybrids and competing systems such as gas turbines, reciprocating engines, fuel cells and traditional grid service. Specific regions in the country have been identified where these

  4. Advanced gas turbine systems program

    Energy Technology Data Exchange (ETDEWEB)

    Zeh, C.M.

    1995-06-01

    The U.S. Department of Energy (DOE) is sponsoring a program to develop fuel-efficient gas turbine-based power systems with low emissions. DOE`s Office of Fossil Energy (DOE/FE) and Office of Energy Efficiency and Renewable Energy (DOE/EE) have initiated an 8-year program to develop high-efficiency, natural gas-fired advanced gas turbine power systems. The Advanced Turbine Systems (ATS) Program will support full-scale prototype demonstration of both industrial- and utility-scale systems that will provide commercial marketplace entries by the year 2000. When the program targets are met, power system emissions will be lower than from the best technology in use today. Efficiency of the utility-scale units will be greater than 60 percent on a lower heating value basis, and emissions of carbon dioxide will be reduced inversely with this increase. Industrial systems will also see an improvement of at least 15 percent in efficiency. Nitrogen oxides will be reduced by at least 10 percent, and carbon monoxide and hydrocarbon emissions will each be kept below 20 parts per million, for both utility and industrial systems.

  5. Advanced Emissions Control Development Program

    Energy Technology Data Exchange (ETDEWEB)

    A.P.Evans; K.E. Redinger; M.J. Holmes

    1998-04-01

    The objective of the Advanced Emissions Control Development Program (AECDP) is to develop practical, cost-effective strategies for reducing the emissions of air toxics from coal-fired boilers. Ideally, the project aim is to effectively control air toxic emissions through the use of conventional flue gas cleanup equipment such as electrostatic precipitators (ESPS), fabric filters (baghouse), and wet flue gas desulfurization. Development work to date has concentrated on the capture of mercury, other trace metals, fine particulate and hydrogen chloride. Following the construction and evaluation of a representative air toxics test facility in Phase I, Phase II focused on the evaluation of mercury and several other air toxics emissions. The AECDP is jointly funded by the United States Department of Energy's Federal Energy Technology Center (DOE), the Ohio Coal Development Office within the Ohio Department of Development (oCDO), and Babcock& Wilcox-a McDermott company (B&W).

  6. Advanced automotive diesel assessment program

    Science.gov (United States)

    Sekar, R.; Tozzi, L.

    1983-01-01

    Cummins Engine Company completed an analytical study to identify an advanced automotive (light duty) diesel (AAD) power plant for a 3,000-pound passenger car. The study resulted in the definition of a revolutionary diesel engine with several novel features. A 3,000-pound car with this engine is predicted to give 96.3, 72.2, and 78.8 MPG in highway, city, and combined highway-city driving, respectively. This compares with current diesel powered cars yielding 41.7, 35.0, and 37.7 MPG. The time for 0-60 MPH acceleration is 13.9 sec. compared to the baseline of 15.2 sec. Four technology areas were identified as crucial in bringing this concept to fruition. They are: (1) part-load preheating, (2) positive displacement compounding, (3) spark assisted diesel combustion system, and (4) piston development for adiabatic, oilless diesel engine. Marketing and planning studies indicate that an aggressive program with significant commitment could result in a production car in 10 years from the date of commencement.

  7. Advanced Engineering Preliminary Program Planning, Rough Draft

    Energy Technology Data Exchange (ETDEWEB)

    Towle, H.C.

    1961-04-20

    The purpose of this document is to assembly certain job elements which may become part of the Advanced Engineerng Subsection programs, so that those individuals who may be requested to participate in such programs may be aware of the nature and form of Advanced Engineering planning.

  8. Advanced turbocharger design study program

    Science.gov (United States)

    Culy, D. G.; Heldenbrand, R. W.; Richardson, N. R.

    1984-01-01

    The advanced Turbocharger Design Study consisted of: (1) the evaluation of three advanced engine designs to determine their turbocharging requirements, and of technologies applicable to advanced turbocharger designs; (2) trade-off studies to define a turbocharger conceptual design and select the engine with the most representative requirements for turbocharging; (3) the preparation of a turbocharger conceptual design for the Curtiss Wright RC2-32 engine selected in the trade-off studies; and (4) the assessment of market impact and the preparation of a technology demonstration plan for the advanced turbocharger.

  9. Advanced Object-Oriented Programming in R

    DEFF Research Database (Denmark)

    Mailund, Thomas

    -oriented manner. You will then be able to use this powerful programming style in your own statistical programming projects to write flexible and extendable software. After reading Advanced Object-Oriented Programming in R, you'll come away with a practical project that you can reuse in your own analytics coding...

  10. Advanced Industrial Materials (AIM) fellowship program

    Energy Technology Data Exchange (ETDEWEB)

    McCleary, D.D. [Oak Ridge Institute for Science and Education, TN (United States)

    1997-04-01

    The Advanced Industrial Materials (AIM) Program administers a Graduate Fellowship Program focused toward helping students who are currently under represented in the nation`s pool of scientists and engineers, enter and complete advanced degree programs. The objectives of the program are to: (1) establish and maintain cooperative linkages between DOE and professors at universities with graduate programs leading toward degrees or with degree options in Materials Science, Materials Engineering, Metallurgical Engineering, and Ceramic Engineering, the disciplines most closely related to the AIM Program at Oak Ridge National Laboratory (ORNL); (2) strengthen the capabilities and increase the level of participation of currently under represented groups in master`s degree programs, and (3) offer graduate students an opportunity for practical research experience related to their thesis topic through the three-month research assignment or practicum at ORNL. The program is administered by the Oak Ridge Institute for Science and Education (ORISE).

  11. Program documentation with advanced data management systems

    Science.gov (United States)

    Swift, W. B.

    1970-01-01

    The problems of program documentation are considered for those cases in which the programmer is using a computer along with an advanced DMS. Three problem areas discussed include: data description, process description, and execution-time documentation.

  12. Advanced Object-Oriented Programming in R

    DEFF Research Database (Denmark)

    Mailund, Thomas

    2017-01-01

    Learn how to write object-oriented programs in R and how to construct classes and class hierarchies in the three object-oriented systems available in R. This book gives an introduction to object-oriented programming in the R programming language and shows you how to use and apply R in an object-oriented...... manner. You will then be able to use this powerful programming style in your own statistical programming projects to write flexible and extendable software. After reading Advanced Object-Oriented Programming in R, you'll come away with a practical project that you can reuse in your own analytics coding...

  13. Advanced Object-Oriented Programming in R

    DEFF Research Database (Denmark)

    Mailund, Thomas

    Learn how to write object-oriented programs in R and how to construct classes and class hierarchies in the three object-oriented systems available in R. This book gives an introduction to object-oriented programming in the R programming language and shows you how to use and apply R in an object......-oriented manner. You will then be able to use this powerful programming style in your own statistical programming projects to write flexible and extendable software. After reading Advanced Object-Oriented Programming in R, you'll come away with a practical project that you can reuse in your own analytics coding...

  14. Algorithmic advances in stochastic programming

    Energy Technology Data Exchange (ETDEWEB)

    Morton, D.P.

    1993-07-01

    Practical planning problems with deterministic forecasts of inherently uncertain parameters often yield unsatisfactory solutions. Stochastic programming formulations allow uncertain parameters to be modeled as random variables with known distributions, but the size of the resulting mathematical programs can be formidable. Decomposition-based algorithms take advantage of special structure and provide an attractive approach to such problems. We consider two classes of decomposition-based stochastic programming algorithms. The first type of algorithm addresses problems with a ``manageable`` number of scenarios. The second class incorporates Monte Carlo sampling within a decomposition algorithm. We develop and empirically study an enhanced Benders decomposition algorithm for solving multistage stochastic linear programs within a prespecified tolerance. The enhancements include warm start basis selection, preliminary cut generation, the multicut procedure, and decision tree traversing strategies. Computational results are presented for a collection of ``real-world`` multistage stochastic hydroelectric scheduling problems. Recently, there has been an increased focus on decomposition-based algorithms that use sampling within the optimization framework. These approaches hold much promise for solving stochastic programs with many scenarios. A critical component of such algorithms is a stopping criterion to ensure the quality of the solution. With this as motivation, we develop a stopping rule theory for algorithms in which bounds on the optimal objective function value are estimated by sampling. Rules are provided for selecting sample sizes and terminating the algorithm under which asymptotic validity of confidence interval statements for the quality of the proposed solution can be verified. Issues associated with the application of this theory to two sampling-based algorithms are considered, and preliminary empirical coverage results are presented.

  15. Solar Concentrator Advanced Development Program

    Science.gov (United States)

    Knasel, Don; Ehresman, Derik

    1989-01-01

    The Solar Concentrator Advanced Development Project has successfully designed, fabricated, and tested a full scale prototypical solar dynamic concentrator for space station applications. A Truss Hexagonal Panel reflector was selected as a viable solar concentrator concept to be used for space station applications. This concentrator utilizes a modular design approach and is flexible in attainable flux profiles and assembly techniques. The detailed design of the concentrator, which included structural, thermal and optical analysis, identified the feasibility of the design and specific technologies that were required to fabricate it. The needed surface accuracy of the reflectors surface was found to be very tight, within 5 mrad RMS slope error, and results in very close tolerances for fabrication. To meet the design requirements, a modular structure composed of hexagonal panels was used. The panels, made up of graphite epoxy box beams provided the strength, stiffness and dimensional stability needed. All initial project requirements were met or exceeded by hardware demonstration. Initial testing of structural repeatability of a seven panel portion of the concentrator was followed by assembly and testing of the full nineteen panel structure. The testing, which consisted of theodolite and optical measurements over an assembly-disassembly-reassembly cycle, demonstrated that the concentrator maintained the as-built contour and optical characteristics. The facet development effort within the project, which included developing the vapor deposited reflective facet, produced a viable design with demonstrated optical characteristics that are within the project goals.

  16. Advanced Object-Oriented Programming in R

    DEFF Research Database (Denmark)

    Mailund, Thomas

    2017-01-01

    -oriented manner. You will then be able to use this powerful programming style in your own statistical programming projects to write flexible and extendable software. After reading Advanced Object-Oriented Programming in R, you'll come away with a practical project that you can reuse in your own analytics coding......Learn how to write object-oriented programs in R and how to construct classes and class hierarchies in the three object-oriented systems available in R. This book gives an introduction to object-oriented programming in the R programming language and shows you how to use and apply R in an object...... of data being manipulated. You will: Define and use classes and generic functions using R Work with the R class hierarchies Benefit from implementation reuse Handle operator overloading Apply the S4 and R6 classes...

  17. Advanced Object-Oriented Programming in R

    DEFF Research Database (Denmark)

    Mailund, Thomas

    -oriented manner. You will then be able to use this powerful programming style in your own statistical programming projects to write flexible and extendable software. After reading Advanced Object-Oriented Programming in R, you'll come away with a practical project that you can reuse in your own analytics coding......Learn how to write object-oriented programs in R and how to construct classes and class hierarchies in the three object-oriented systems available in R. This book gives an introduction to object-oriented programming in the R programming language and shows you how to use and apply R in an object...... of data being manipulated. You will: Define and use classes and generic functions using R Work with the R class hierarchies Benefit from implementation reuse Handle operator overloading Apply the S4 and R6 classes...

  18. Advanced Object-Oriented Programming in R

    DEFF Research Database (Denmark)

    Mailund, Thomas

    Learn how to write object-oriented programs in R and how to construct classes and class hierarchies in the three object-oriented systems available in R. This book gives an introduction to object-oriented programming in the R programming language and shows you how to use and apply R in an object......-oriented manner. You will then be able to use this powerful programming style in your own statistical programming projects to write flexible and extendable software. After reading Advanced Object-Oriented Programming in R, you'll come away with a practical project that you can reuse in your own analytics coding...... of data being manipulated. You will: Define and use classes and generic functions using R Work with the R class hierarchies Benefit from implementation reuse Handle operator overloading Apply the S4 and R6 classes...

  19. Advanced Object-Oriented Programming in R

    DEFF Research Database (Denmark)

    Mailund, Thomas

    Learn how to write object-oriented programs in R and how to construct classes and class hierarchies in the three object-oriented systems available in R. This book gives an introduction to object-oriented programming in the R programming language and shows you how to use and apply R in an object-oriented...... manner. You will then be able to use this powerful programming style in your own statistical programming projects to write flexible and extendable software. After reading Advanced Object-Oriented Programming in R, you'll come away with a practical project that you can reuse in your own analytics coding...... endeavors. You’ll then be able to visualize your data as objects that have state and then manipulate those objects with polymorphic or generic methods. Your projects will benefit from the high degree of flexibility provided by polymorphism, where the choice of concrete method to execute depends on the type...

  20. NASA/industry advanced turboprop technology program

    Energy Technology Data Exchange (ETDEWEB)

    Ziemianski, J.A.; Whitlow, J.B. Jr.

    1988-01-01

    Experimental and analytical effort shows that use of advanced turboprop (propfan) propulsion instead of conventional turbofans in the older narrow-body airline fleet could reduce fuel consumption for this type of aircraft by up to 50 percent. The NASA Advanced Turboprop (ATP) program was formulated to address the key technologies required for these thin, swept-blade propeller concepts. A NASA, industry, and university team was assembled to develop and validate applicable design codes and prove by ground and flight test the viability of these propeller concepts. Some of the history of the ATP project, an overview of some of the issues, and a summary of the technology developed to make advanced propellers viable in the high-subsonic cruise speed application are presented. The ATP program was awarded the prestigious Robert J. Collier Trophy for the greatest achievement in aeronautics and astronautics in America in 1987.

  1. IPIRG programs - advances in pipe fracture technology

    Energy Technology Data Exchange (ETDEWEB)

    Wilkowski, G.; Olson, R.; Scott, P. [Batelle, Columbus, OH (United States)

    1997-04-01

    This paper presents an overview of the advances made in fracture control technology as a result of the research performed in the International Piping Integrity Research Group (IPIRG) program. The findings from numerous experiments and supporting analyses conducted to investigate the behavior of circumferentially flawed piping and pipe systems subjected to high-rate loading typical of seismic events are summarized. Topics to be discussed include; (1) Seismic loading effects on material properties, (2) Piping system behavior under seismic loads, (3) Advances in elbow fracture evaluations, and (4) {open_quotes}Real{close_quotes} piping system response. The presentation for each topic will be illustrated with data and analytical results. In each case, the state-of-the-art in fracture mechanics prior to the first IPIRG program will be contrasted with the state-of-the-art at the completion of the IPIRG-2 program.

  2. Academic training: Advanced lectures on multiprocessor programming

    CERN Multimedia

    PH Department

    2011-01-01

    Academic Training Lecture - Regular Programme 31 October 1, 2 November 2011 from 11:00 to 12:00 -  IT Auditorium, Bldg. 31   Three classes (60 mins) on Multiprocessor Programming Prof. Dr. Christoph von Praun Georg-Simon-Ohm University of Applied Sciences Nuremberg, Germany This is an advanced class on multiprocessor programming. The class gives an introduction to principles of concurrent objects and the notion of different progress guarantees that concurrent computations can have. The focus of this class is on non-blocking computations, i.e. concurrent programs that do not make use of locks. We discuss the implementation of practical non-blocking data structures in detail. 1st class: Introduction to concurrent objects 2nd class: Principles of non-blocking synchronization 3rd class: Concurrent queues Brief Bio of Christoph von Praun Christoph worked on a variety of analysis techniques and runtime platforms for parallel programs. Hist most recent research studies programming models an...

  3. NASA's Advanced Space Transportation Hypersonic Program

    Science.gov (United States)

    Hueter, Uwe; McClinton, Charles; Cook, Stephen (Technical Monitor)

    2002-01-01

    NASA's has established long term goals for access-to-space. NASA's third generation launch systems are to be fully reusable and operational in approximately 25 years. The goals for third generation launch systems are to reduce cost by a factor of 100 and improve safety by a factor of 10,000 over current conditions. The Advanced Space Transportation Program Office (ASTP) at NASA's Marshall Space Flight Center in Huntsville, AL has the agency lead to develop third generation space transportation technologies. The Hypersonics Investment Area, part of ASTP, is developing the third generation launch vehicle technologies in two main areas, propulsion and airframes. The program's major investment is in hypersonic airbreathing propulsion since it offers the greatest potential for meeting the third generation launch vehicles. The program will mature the technologies in three key propulsion areas, scramjets, rocket-based combined cycle and turbine-based combination cycle. Ground and flight propulsion tests are being planned for the propulsion technologies. Airframe technologies will be matured primarily through ground testing. This paper describes NASA's activities in hypersonics. Current programs, accomplishments, future plans and technologies that are being pursued by the Hypersonics Investment Area under the Advanced Space Transportation Program Office will be discussed.

  4. Advanced Reactors Transition Program Resource Loaded Schedule

    Energy Technology Data Exchange (ETDEWEB)

    GANTT, D.A.

    2000-01-12

    The Advanced Reactors Transition (ART) Resource Loaded Schedule (RLS) provides a cost and schedule baseline for managing the project elements within the ART Program. The Fast Flux Test Facility (FETF) activities are delineated through the end of FY 2000, assuming continued standby. The Nuclear Energy (NE) Legacies and Plutonium Recycle Test Reactor (PRTR) activities are delineated through the end of the deactivation process. This revision reflects the 19 Oct 1999 baseline.

  5. Advanced Reactors Transition Program Resource Loaded Schedule

    Energy Technology Data Exchange (ETDEWEB)

    BOWEN, W.W.

    1999-11-08

    The Advanced Reactors Transition (ART) Resource Loaded Schedule (RLS) provides a cost and schedule baseline for managing the project elements within the ART Program. The Fast Flux Test Facility (FFTF) activities are delineated through the end of FY 2000, assuming continued standby. The Nuclear Energy (NE) Legacies and Plutonium Recycle Test Reactor (PRTR) activities are delineated through the end of the deactivation process. This document reflects the 1 Oct 1999 baseline.

  6. Industrial Advanced Turbine Systems Program overview

    Energy Technology Data Exchange (ETDEWEB)

    Esbeck, D.W. [Solar Turbines Inc., San Diego, CA (United States)

    1995-10-01

    The U.S. Department of Energy (DOE), in partnership with industry, has set new performance standards for industrial gas turbines through the creation of the Industrial Advanced Turbine System Program. Their leadership will lead to the development of an optimized, energy efficient, and environmentally friendly gas turbine power systems in this size class (3-to-20 MW). The DOE has already created a positive effect by encouraging gas turbine system manufacturers to reassess their product and technology plans using the new higher standards as the benchmark. Solar Turbines has been a leader in the industrial gas turbine business, and is delighted to have joined with the DOE in developing the goals and vision for this program. We welcome the opportunity to help the national goals of energy conservation and environmental enhancement. The results of this program should lead to the U.S. based gas turbine industry maintaining its international leadership and the creation of highly paid domestic jobs.

  7. Semi-infinite programming recent advances

    CERN Document Server

    López, Marco

    2001-01-01

    Semi-infinite programming (SIP) deals with optimization problems in which either the number of decision variables or the number of constraints is finite This book presents the state of the art in SIP in a suggestive way, bringing the powerful SIP tools close to the potential users in different scientific and technological fields The volume is divided into four parts Part I reviews the first decade of SIP (1962-1972) Part II analyses convex and generalised SIP, conic linear programming, and disjunctive programming New numerical methods for linear, convex, and continuously differentiable SIP problems are proposed in Part III Finally, Part IV provides an overview of the applications of SIP to probability, statistics, experimental design, robotics, optimization under uncertainty, production games, and separation problems Audience This book is an indispensable reference and source for advanced students and researchers in applied mathematics and engineering

  8. ADVANCED TURBINE SYSTEM FEDERAL ASSISTANCE PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Frank Macri

    2003-10-01

    Rolls-Royce Corporation has completed a cooperative agreement under Department of Energy (DOE) contract DE-FC21-96MC33066 in support of the Advanced Turbine Systems (ATS) program to stimulate industrial power generation markets. This DOE contract was performed during the period of October 1995 to December 2002. This final technical report, which is a program deliverable, describes all associated results obtained during Phases 3A and 3B of the contract. Rolls-Royce Corporation (formerly Allison Engine Company) initially focused on the design and development of a 10-megawatt (MW) high-efficiency industrial gas turbine engine/package concept (termed the 701-K) to meet the specific goals of the ATS program, which included single digit NOx emissions, increased plant efficiency, fuel flexibility, and reduced cost of power (i.e., $/kW). While a detailed design effort and associated component development were successfully accomplished for the 701-K engine, capable of achieving the stated ATS program goals, in 1999 Rolls-Royce changed its focus to developing advanced component technologies for product insertion that would modernize the current fleet of 501-K and 601-K industrial gas turbines. This effort would also help to establish commercial venues for suppliers and designers and assist in involving future advanced technologies in the field of gas turbine engine development. This strategy change was partly driven by the market requirements that suggested a low demand for a 10-MW aeroderivative industrial gas turbine, a change in corporate strategy for aeroderivative gas turbine engine development initiatives, and a consensus that a better return on investment (ROI) could be achieved under the ATS contract by focusing on product improvements and technology insertion for the existing Rolls-Royce small engine industrial gas turbine fleet.

  9. Advanced interdisciplinary undergraduate program: light engineering

    Science.gov (United States)

    Bakholdin, Alexey; Bougrov, Vladislav; Voznesenskaya, Anna; Ezhova, Kseniia

    2016-09-01

    The undergraduate educational program "Light Engineering" of an advanced level of studies is focused on development of scientific learning outcomes and training of professionals, whose activities are in the interdisciplinary fields of Optical engineering and Technical physics. The program gives practical experience in transmission, reception, storage, processing and displaying information using opto-electronic devices, automation of optical systems design, computer image modeling, automated quality control and characterization of optical devices. The program is implemented in accordance with Educational standards of the ITMO University. The specific features of the Program is practice- and problem-based learning implemented by engaging students to perform research and projects, internships at the enterprises and in leading Russian and international research educational centers. The modular structure of the Program and a significant proportion of variable disciplines provide the concept of individual learning for each student. Learning outcomes of the program's graduates include theoretical knowledge and skills in natural science and core professional disciplines, deep knowledge of modern computer technologies, research expertise, design skills, optical and optoelectronic systems and devices.

  10. 76 FR 24343 - Advanced Biofuel Payment Program; Correction

    Science.gov (United States)

    2011-05-02

    ... Service Rural Utilities Service 7 CFR Part 4288 RIN 0570-AA75 Advanced Biofuel Payment Program; Correction... Advanced Biofuel Payment Program authorized under the Food, Conservation, and Energy Act of 2008. This... contracts with advanced biofuel producers to pay such producers for the production of eligible advanced...

  11. Labview advanced programming techniques, second edition

    CERN Document Server

    Bitter, Rick; Nawrocki, Matt

    2006-01-01

    Whether seeking deeper knowledge of LabVIEW®'s capabilities or striving to build enhanced VIs, professionals know they will find everything they need in LabVIEW: Advanced Programming Techniques. Now accompanied by LabVIEW 2011, this classic second edition, focusing on LabVIEW 8.0, delves deeply into the classic features that continue to make LabVIEW one of the most popular and widely used graphical programming environments across the engineering community. The authors review the front panel controls, the Standard State Machine template, drivers, the instrument I/O assistant, error handling functions, hyperthreading, and Express VIs. It covers the introduction of the Shared Variables function in LabVIEW 8.0 and explores the LabVIEW project view. The chapter on ActiveX includes discussion of the Microsoft™ .NET® framework and new examples of programming in LabVIEW using .NET. Numerous illustrations and step-by-step explanations provide hands-on guidance. Reviewing LabVIEW 8.0 and accompanied by the latest s...

  12. National Advanced Drilling and Excavation Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1993-06-15

    The second meeting of Federal agency representatives interested in the National Advanced Drilling and Excavation Technologies (NADET) Program took place on June 15, 1993. The Geothermal Division of the U.S. Department of Energy (DOE) hosted the meeting at the Washington, D.C., offices of DOE. Representatives from the National Science Foundation, U.S. Geological Survey, U.S. Bureau of Mines, National Institute of Standards and Technology, National Aeronautics and Space Administration, Environmental Protection Agency, and various offices within the Department of Energy attended. For a complete list of attendees see Attachment A. The purpose of the meeting was: (1) to cover the status of efforts to gain formal approval for NADET, (2) to brief participants on events since the last meeting, especially two recent workshops that explored research needs in drilling and excavation, (3) to review some recent technological advances, and (4) to solicit statements of the importance of improving drilling and excavation technologies to the missions of the various agencies. The meeting agenda is included as Attachment B.

  13. Advanced Materials Development Program: Ceramic Technology for Advanced Heat Engines program plan, 1983--1993

    Energy Technology Data Exchange (ETDEWEB)

    1990-07-01

    The purpose of the Ceramic Technology for Advanced Heat Engines (CTAHE) Project is the development of an industrial technology base capable of providing reliable and cost-effective high temperature ceramic components for application in advanced heat engines. There is a deliberate emphasis on industrial'' in the purpose statement. The project is intended to support the US ceramic and engine industries by providing the needed ceramic materials technology. The heat engine programs have goals of component development and proof-of-concept. The CTAHE Project is aimed at developing generic basic ceramic technology and does not involve specific engine designs and components. The materials research and development efforts in the CTAHE Project are focused on the needs and general requirements of the advanced gas turbine and low heat rejection diesel engines. The CTAHE Project supports the DOE Office of Transportation Systems' heat engine programs, Advanced Turbine Technology Applications (ATTAP) and Heavy Duty Transport (HDT) by providing the basic technology required for development of reliable and cost-effective ceramic components. The heat engine programs provide the iterative component design, fabrication, and test development logic. 103 refs., 18 figs., 11 tabs.

  14. The Advanced Controls Program at Oak Ridge National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Knee, H.E.; White, J.D.

    1990-01-01

    The Oak Ridge National Laboratory (ORNL), under sponsorship of the US Department of Energy (DOE), is conducting research that will lead to advanced, automated control of new liquid-metal-reactor (LMR) nuclear power plants. Although this program of research (entitled the Advanced Controls Program'') is focused on LMR technology, it will be capable of providing control design, test, and qualification capability for other advanced reactor designs (e.g., the advanced light water reactor (ALWR) and high temperature gas-cooled reactor (HTGR) designs), while also benefiting existing nuclear plants. The Program will also have applicability to complex, non-nuclear process control environments (e.g., petrochemical, aerospace, etc.). The Advanced Controls Program will support capabilities throughout the entire plant design life cycle, i.e., from the initial interactive first-principle dynamic model development for the process, systems, components, and instruments through advanced control room qualification. The current program involves five principal areas of research activities: (1) demonstrations of advanced control system designs, (2) development of an advanced controls design environment, (3) development of advanced control strategies, (4) research and development (R D) in human-system integration for advanced control system designs, and (5) testing and validation of advanced control system designs. Discussion of the research in these five areas forms the basis of this paper. Also included is a description of the research directions of the program. 8 refs.

  15. European advanced driver training programs: Reasons for optimism

    National Research Council Canada - National Science Library

    Washington, Simon; Cole, Robert J; Herbel, Susan B

    2011-01-01

    Post license advanced driver training programs in the US and early programs in Europe have often failed to accomplish their stated objectives because, it is suspected, that drivers gain self perceived...

  16. Advanced Pediatric Brain Imaging Research and Training Program

    Science.gov (United States)

    2017-10-01

    Award Number: W81XWH-11-2-0198 TITLE: Advanced Pediatric Brain Imaging Research and Training Program PRINCIPAL INVESTIGATOR: Catherine...TITLE AND SUBTITLE 5a. CONTRACT NUMBER Advanced Pediatric Brain Imaging Research and Training Program 5b. GRANT NUMBER W81XWH-11-2-0198 5c. PROGRAM ...13. SUPPLEMENTARY NOTES 14. ABSTRACT The focus of our BRAIN training program over the past year of the project is to successfully convert the

  17. AP: A Critical Examination of the Advanced Placement Program

    Science.gov (United States)

    Sadler, Philip M.; Sonnert, Gerhard; Tai, Robert; Klopfenstein, Kirstin

    2016-01-01

    The Advanced Placement (AP) program was created to enhance the experience of gifted students as they transition from high school to college. "AP: A Critical Examination of the Advanced Placement Program," edited by Philip M. Sadler, Gerhard Sonnert, Robert Tai, and Kirstin Klopfenstein (2010, Harvard Education Press), questions the…

  18. 75 FR 11836 - Bioenergy Program for Advanced Biofuels

    Science.gov (United States)

    2010-03-12

    ... Rural Business-Cooperative Service Bioenergy Program for Advanced Biofuels AGENCY: Rural Business... Program for Advanced Biofuels under criteria established in the prior NOCP, which was published in this... Biofuels. In response to the previously published NOCP, approximately $14.5 million in contracts between...

  19. 76 FR 7935 - Advanced Biofuel Payment Program

    Science.gov (United States)

    2011-02-11

    ... actual amount of advanced biofuel produced in the quarter; Requiring participating producers to submit... biorefinery. However, the option for a facility to produce biogas that could be used commercially off-site or... ethanol facilities will produce gaseous advanced biofuels via anaerobic digesters. This biogas will be...

  20. Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program Implementation

    Energy Technology Data Exchange (ETDEWEB)

    Liby, Alan L [ORNL; Rogers, Hiram [ORNL

    2013-10-01

    The goal of this activity was to carry out program implementation and technical projects in support of the ARRA-funded Advanced Materials in Support of EERE Needs to Advance Clean Energy Technologies Program of the DOE Advanced Manufacturing Office (AMO) (formerly the Industrial Technologies Program (ITP)). The work was organized into eight projects in four materials areas: strategic materials, structural materials, energy storage and production materials, and advanced/field/transient processing. Strategic materials included work on titanium, magnesium and carbon fiber. Structural materials included work on alumina forming austentic (AFA) and CF8C-Plus steels. The advanced batteries and production materials projects included work on advanced batteries and photovoltaic devices. Advanced/field/transient processing included work on magnetic field processing. Details of the work in the eight projects are available in the project final reports which have been previously submitted.

  1. Advanced Emissions Control Development Program: Phase III

    Energy Technology Data Exchange (ETDEWEB)

    G.T. Amrhein; R.T. Bailey; W. Downs; M.J. Holmes; G.A. Kudlac; D.A. Madden

    1999-07-01

    The primary objective of the Advanced Emissions Control Development Program (AECDP) is to develop practical, cost-effective strategies for reducing the emissions of air toxics from coal-fired boilers. The project goal is to effectively control air toxic emissions through the use of conventional flue gas clean-up equipment such as electrostatic precipitators (ESPs), fabric filters (baghouses - BH), and wet flue gas desulfurization systems (WFGD). Development work concentrated on the capture of trace metals, fine particulate, hydrogen chloride and hydrogen fluoride, with an emphasis on the control of mercury. The AECDP project is jointly funded by the US Department of Energy's Federal Energy Technology Center (DOE), the Ohio Coal Development Office within the Ohio Department of Development (OCDO), and Babcock and Wilcox, a McDermott company (B and W). This report discusses results of all three phases of the AECDP project with an emphasis on Phase III activities. Following the construction and evaluation of a representative air toxics test facility in Phase I, Phase II focused on characterization of the emissions of mercury and other air toxics and the control of these emissions for typical operating conditions of conventional flue gas clean-up equipment. Some general comments that can be made about the control of air toxics while burning a high-sulfur bituminous coal are as follows: (1) particulate control devices such as ESP's and baghouses do a good job of removing non-volatile trace metals, (2) particulate control devices (ESPs and baghouses) effectively remove the particulate-phase mercury, but the particulate-phase mercury was only a small fraction of the total for the coals tested, (3) wet scrubbing can effectively remove hydrogen chloride and hydrogen fluoride, and (4) wet scrubbers show good potential for the removal of mercury when operated under certain conditions, however, for certain applications, system enhancements can be required to achieve

  2. A Distance Learning Program in Advanced General Dentistry.

    Science.gov (United States)

    Smith, Timothy A.; Raybould, Ted P.; Hardison, J. David

    1998-01-01

    Describes a University of Kentucky program in advanced general dentistry offered by compressed video and computer in remote areas of the state. Topics discussed include program development, the technology, instructional design principles used, student recruitment, program evaluation, student evaluation, faculty evaluation, laboratory exercises,…

  3. An introduction to NASA's advanced computing program: Integrated computing systems in advanced multichip modules

    Science.gov (United States)

    Fang, Wai-Chi; Alkalai, Leon

    1996-01-01

    Recent changes within NASA's space exploration program favor the design, implementation, and operation of low cost, lightweight, small and micro spacecraft with multiple launches per year. In order to meet the future needs of these missions with regard to the use of spacecraft microelectronics, NASA's advanced flight computing (AFC) program is currently considering industrial cooperation and advanced packaging architectures. In relation to this, the AFC program is reviewed, considering the design and implementation of NASA's AFC multichip module.

  4. Beyond Introductory Programming: Success Factors for Advanced Programming

    Science.gov (United States)

    Hoskey, Arthur; Maurino, Paula San Millan

    2011-01-01

    Numerous studies document high drop-out and failure rates for students in computer programming classes. Studies show that even when some students pass programming classes, they still do not know how to program. Many factors have been considered to explain this problem including gender, age, prior programming experience, major, math background,…

  5. ALPES: an advanced logic programming environment

    Directory of Open Access Journals (Sweden)

    Cristina Ruggieri

    1988-11-01

    Full Text Available This paper introduces a software programming environment for an extended Prolog language, called ALPES. The purpose of ALPES is to enable a logic programming paradigm to become a software engineering tool to design, develop and prototype traditional software systems, as well as artificial intelligence applications. The key structuring concepts for programs, as well as for the system architecture as a whole are those of contexts, processes and communication. The software design and development methodologies induced by the use of the Alpes-Prolog language have been incrementally used to develop the environment itself. This research was conducted under the Esprit projects P973 (ALPES.

  6. Advanced Turbine System Program: Phase 2 cycle selection

    Energy Technology Data Exchange (ETDEWEB)

    Latcovich, J.A. Jr. [ABB Power Generation, Inc., Midlothian, VA (United States)

    1995-10-01

    The objectives of the Advanced Turbine System (ATS) Phase 2 Program were to define a commercially attractive ATS cycle and to develop the necessary technologies required to meet the ATS Program goals with this cycle. This program is part of an eight-year Department of Energy, Fossil Energy sponsored ATS Program to make a significant improvement in natural gas-fired power generation plant efficiency while providing an environmentally superior and cost-effective system.

  7. 77 FR 65006 - Air Cargo Advance Screening (ACAS) Pilot Program

    Science.gov (United States)

    2012-10-24

    ... SECURITY U.S. Customs and Border Protection Air Cargo Advance Screening (ACAS) Pilot Program AGENCY: U.S... targeting could occur in the pre-loading air cargo environment, thus establishing the ACAS pilot. Since then... July 27, 2012, CBP published ``Air Cargo Advance Screening Pilot Frequently Asked Questions'' at http...

  8. Recent advances in multiparametric nonlinear programming

    KAUST Repository

    Domínguez, Luis F.

    2010-05-01

    In this paper, we present recent developments in multiparametric nonlinear programming. For the case of convex problems, we highlight key issues regarding the full characterization of the parametric solution space and we discuss, through an illustrative example problem, four alternative state-of-the-art multiparametric nonlinear programming algorithms. We also identify a number of main challenges for the non-convex case and highlight future research directions. © 2009 Elsevier Ltd. All rights reserved.

  9. Center for Advanced Energy Studies Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Kostelnik

    2005-09-01

    The world is facing critical energy-related challenges regarding world and national energy demands, advanced science and energy technology delivery, nuclear engineering educational shortfalls, and adequately trained technical staff. Resolution of these issues is important for the United States to ensure a secure and affordable energy supply, which is essential for maintaining U.S. national security, continued economic prosperity, and future sustainable development. One way that the U.S. Department of Energy (DOE) is addressing these challenges is by tasking the Battelle Energy Alliance, LLC (BEA) with developing the Center for Advanced Energy Studies (CAES) at the Idaho National Laboratory (INL). By 2015, CAES will be a self-sustaining, world-class, academic and research institution where the INL; DOE; Idaho, regional, and other national universities; and the international community will cooperate to conduct critical energy-related research, classroom instruction, technical training, policy conceptualization, public dialogue, and other events.

  10. Advanced Design Program (ARIES) Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Tillack, Mark [Univ. of California, San Diego, CA (United States)

    2016-02-16

    Progress is reported for the ARIES 3-year research program at UC San Diego, including three main tasks: 1. Completion of ARIES research on PMI/PFC issues. 2. Detailed engineering design and analysis of divertors and first wall/blankets. 3. Mission & requirements of FNSF.

  11. Advanced Placement Program at Palo Verde College.

    Science.gov (United States)

    Twitchell, Theodore G.

    This study reports the outcome of an initial implementation of a California law permitting mentally gifted high school students to attend a junior college part time. The program procedure is described in terms of (1) selection and enrollment, (2) discipline, (3) books, (4) matters relating to high school graduation, (5) information for parents,…

  12. Advanced Turbine Systems annual program review

    Energy Technology Data Exchange (ETDEWEB)

    Koop, W.E. [Air Force, Wright-Patterson Air Force Base, OH (United States)

    1995-10-01

    Integrated High Performance Turbine Engine Technology (IHPTET) is a joint Air Force, Navy, Army, NASA, ARPA, and industry program focused on developing turbine engine technologies, with the goal of doubling propulsion capability by around the turn-of-the-century, and thus providing smaller, lighter, more durable, more affordable turbine engines in the future. IHPTET`s technology development plan for increasing propulsion capability with respect to time is divided into three phases. This phased approach reduces the technological risk of taking one giant leap, and also reduces the {open_quotes}political{close_quotes} risk of not delivering a product for an extended period of time, in that the phasing allows continuous transfer of IHPTET technologies to our warfighters and continuous transfer to the commercial sector (dual-use). The IHPTET program addresses the three major classes of engines: turbofan/turbojet, turboshaft/turboprop, and expendables.

  13. 75 FR 21191 - Subpart B-Advanced Biofuel Payment Program; Correction

    Science.gov (United States)

    2010-04-23

    ...--Advanced Biofuel Payment Program; Correction AGENCY: Rural Business-Cooperative Service, USDA. ACTION... existing advanced biofuel production and to encourage new production of advanced biofuels. As published...

  14. Advanced, enhanced HEX program for PIXE

    Science.gov (United States)

    Lipworth, A. D.; Annegarn, H. J.; Kneen, M. A.

    1993-04-01

    The REX code and subsequent HEX code, originating at Florida State University, have been extensively used for PIXE spectra fitting. In 1989 we produced a renovated HEX package: WITS-HEX, enabling the original Fortran program to be more accessible to the PIXE community. We modernised the user interface by replacing the batch mode of operation with an integrated, menu-driven environment. We added the ability to edit support data files from within the program, provided detailed feedback during the fitting process and enhanced spectral plots using high resolution colour graphics. Our prototype also permitted the inclusion of many more peaks and absorption coefficients into the element library than the original HEX, permitting a more extensive element request list to be used during the fitting operation. We have now completed the second phase of the renewal of HEX. The man-machine interface has been upgraded to conform to the IBM SAA Common User Access (CUA) standard. This eliminated several of the sequential (modal) human-computer dialogues, replacing them with a single parallel system. The support utility used in WITS-HEX to convert the binary format of spectra captured using foreign data acquisition systems has been replaced by code to directly access data in ASCII format. The program is now equipped with context-sensitive help and a tutorial. The polynomial background model has been supplemented by a digital filter model, eliminating the associated instability from the fitting process and other spectral features modelled. The program has been validated by comparing results with those obtained from the former versions: WITS-HEX and HEX. A demonstration version is available on request for evaluation purposes.

  15. CENTER FOR ADVANCED SEPARATION TECHNOLOGY (CAST) PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Roe-Hoan; Hull, Christopher

    2014-09-30

    The U.S. is the largest producer of mining products in the world. In 2011, U.S. mining operations contributed a total of $232 billion to the nation’s GDP plus $138 billion in labor income. Of this the coal mining industry contributed a total of $97.5 billion to GDP plus $53 billion in labor income. Despite these contributions, the industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations.

  16. Advanced power electronics and electric machinery program

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2007-12-01

    The U.S. Department of Energy (DOE) and the U.S. Council for Automotive Research (composed of automakers Ford, General Motors, and Chrysler) announced in January 2002 a new cooperative research effort. Known as "FreedomCAR" (derived from "Freedom" and "Cooperative Automotive Research"), it represents DOE's commitment to developing public/private partnerships to fund high-risk, high-payoff research into advanced automotive technologies. Efficient fuel cell technology, which uses hydrogen to power automobiles without air pollution, is a very promising pathway to achieving the ultimate vision. The new partnership replaces and builds upon the Partnership for a New Generation of Vehicles initiative that ran from 1993 through 2001.

  17. DOD's advanced thermionics program an overview

    Energy Technology Data Exchange (ETDEWEB)

    Drake, T.R.

    1998-07-01

    The Defense Special Weapons Agency (DSWA) manages a congressionally mandated program in advanced thermionics research. Guided by congressional language to advance the state-of-the-art in the US and support the Integrated Solar Upper Stage (ISUS) program, DSWA efforts concentrate on four areas: an electrically testable design of a high-performance, in-core thermionic fuel element (TFE), the ISUS program, a microminiature thermionic converter and several modeling efforts. The DSWA domestic program is augmented by several small contracts with Russian institutes, awarded under the former TOPAZ International Program that the Ballistic Missile Defense Organization transferred to DSWA. The design effort at General Atomics will result in an electrically testable, multi-cell TFE for in-core conversion, involving system design and advanced collector and emitter technologies. For the ISUS program, DSWA funded a portion of the engine ground demonstration, including development of the power management system and the planar diodes. Current efforts supporting ISUS include continued diode testing and developing an advanced planar diode. The MTC program seeks to design a mass producable, close-spaced thermionic converter using integrated circuit technologies. Modeling and analysis at DSWA involves development of the Reactor System Mass with Thermionics estimation model (RSMASS-T), developing a new thermionic theory, and reviewing applications for the MTC technology. The Russian deliverables include several reports and associated hardware that describe many of its state-of-the-art thermionic technologies and processes.

  18. A case study of the Advanced Amphibious Assault Vehicle (AAAV) program from a program management perspective

    OpenAIRE

    Adams, Scott R.

    1999-01-01

    This research effort focused on the program management issues of the U.S. Marine Corps' Advanced Amphibious Assault Vehicle (AAAV) Program. The research answered the primary question of what were the critical program management decisions during the early phases of the program and how would an analysis of these decisions affect the future of the AAAV program. Interviews were conducted with key personnel from the AAAV office and General Dynamics Land Systems. Additionally, program documents and...

  19. Advanced ignition and propulsion technology program

    Energy Technology Data Exchange (ETDEWEB)

    Oldenborg, R.; Early, J.; Lester, C.

    1998-11-01

    This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Reliable engine re-ignition plays a crucial role in enabling commercial and military aircraft to fly safely at high altitudes. This project addressed research elements critical to the optimization of laser-based igniter. The effort initially involved a collaborative research and development agreement with B.F. Goodrich Aerospace and Laser Fare, Inc. The work involved integrated experiments with theoretical modeling to provide a basic understanding of the chemistry and physics controlling the laser-induced ignition of fuel aerosols produced by turbojet engine injectors. In addition, the authors defined advanced laser igniter configurations that minimize laser packaging size, weight, complexity and power consumption. These innovative ignition concepts were shown to reliably ignite jet fuel aerosols over a broad range of fuel/air mixture and a t fuel temperatures as low as -40 deg F. The demonstrated fuel ignition performance was highly superior to that obtained by the state-of-the-art, laser-spark ignition method utilizing comparable laser energy. The authors also developed a laser-based method that effectively removes optically opaque deposits of fuel hydrocarbon combustion residues from laser window surfaces. Seven patents have been either issued or are pending that resulted from the technology developments within this project.

  20. Solar concentrator advanced development program. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Knasel, D.; Ehresman, D.

    1989-10-01

    The Solar Concentrator Advanced Development Project has successfully designed, fabricated, and tested a full scale prototypical solar dynamic concentrator for space station applications. A Truss Hexagonal Panel reflector was selected as a viable solar concentrator concept to be used for space station applications. This concentrator utilizes a modular design approach and is flexible in attainable flux profiles and assembly techniques. The detailed design of the concentrator, which included structural, thermal and optical analysis, identified the feasibility of the design and specific technologies that were required to fabricate it. The needed surface accuracy of the reflectors surface was found to be very tight, within 5 mrad RMS slope error, and results in very close tolerances for fabrication. To meet the design requirements, a modular structure composed of hexagonal panels was used. The panels, made up of graphite epoxy box beams provided the strength, stiffness and dimensional stability needed. All initial project requirements were met or exceeded by hardware demonstration. Initial testing of structural repeatability of a seven panel portion of the concentrator was followed by assembly and testing of the full nineteen panel structure. The testing, which consisted of theodolite and optical measurements over an assembly-disassembly-reassembly cycle, demonstrated that the concentrator maintained the as-built contour and optical characteristics. The facet development effort within the project, which included developing the vapor deposited reflective facet, produced a viable design with demonstrated optical characteristics that are within the project goals.

  1. Advancing NOAA NWS Arctic Program Development

    Science.gov (United States)

    Timofeyeva-Livezey, M. M.; Horsfall, F. M. C.; Meyers, J. C.; Churma, M.; Thoman, R.

    2016-12-01

    Environmental changes in the Arctic require changes in the way the National Oceanic and Atmospheric Administration (NOAA) delivers hydrological and meteorological information to prepare the region's societies and indigenous population for emerging challenges. These challenges include changing weather patterns, changes in the timing and extent of sea ice, accelerated soil erosion due to permafrost decline, increasing coastal vulnerably, and changes in the traditional food supply. The decline in Arctic sea ice is opening new opportunities for exploitation of natural resources, commerce, tourism, and military interest. These societal challenges and economic opportunities call for a NOAA integrated approach for delivery of environmental information including climate, water, and weather data, forecasts, and warnings. Presently the NOAA Arctic Task Force provides leadership in programmatic coordination across NOAA line offices. National Weather Service (NWS) Alaska Region and the National Centers for Environmental Prediction (NCEP) provide the foundational operational hydro-meteorological products and services in the Arctic. Starting in 2016, NOAA's NWS will work toward improving its role in programmatic coordination and development through assembling an NWS Arctic Task Team. The team will foster ties in the Arctic between the 11 NWS national service programs in climate, water, and weather information, as well as between Arctic programs in NWS and other NOAA line offices and external partners. One of the team outcomes is improving decision support tools for the Arctic. The Local Climate Analysis Tool (LCAT) currently has more than 1100 registered users, including NOAA staff and technical partners. The tool has been available online since 2013 (http://nws.weather.gov/lcat/ ). The tool links trusted, recommended NOAA data and analytical capabilities to assess impacts of climate variability and climate change at local levels. A new capability currently being developed will

  2. European advanced driver training programs: Reasons for optimism

    Directory of Open Access Journals (Sweden)

    Simon Washington

    2011-03-01

    This paper reviews the predominant features and empirical evidence surrounding post licensing advanced driver training programs focused on novice drivers. A clear articulation of differences between the renewed and current US advanced driver training programs is provided. While the individual quantitative evaluations range from marginally to significantly effective in reducing novice driver crash risk, they have been criticized for evaluation deficiencies ranging from small sample sizes to confounding variables to lack of exposure metrics. Collectively, however, the programs sited in the paper suggest at least a marginally positive effect that needs to be validated with further studies. If additional well controlled studies can validate these programs, a pilot program in the US should be considered.

  3. Advanced Industrial Materials (AIM) Program: Annual progress report FY 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven ``Vision Industries`` that use about 80% of industrial energy and generated about 90% of industrial wastes. The mission of AIM has, therefore, changed to ``Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`` Though AIM remains essentially a National Laboratory Program, it is essential that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains reasonably healthy and productive, thanks to the superb investigators and Laboratory Program Managers. This Annual Report for FY 1995 contains the technical details of some very remarkable work by the best materials scientists and engineers in the world. Areas covered here are: advanced metals and composites; advanced ceramics and composites; polymers and biobased materials; and new materials and processes.

  4. Advanced Turbine Systems Program industrial system concept development

    Energy Technology Data Exchange (ETDEWEB)

    Gates, S. [Solar Turbines Inc., San Diego, CA (United States)

    1995-10-01

    The objective of Phase II of the Advanced Turbine Systems Program is to develop conceptual designs of gas fired advanced turbine systems that can be adapted for operation on coal and biomass fuels. The technical, economic, and environmental performance operating on natural gas and in a coal fueled mode is to be assessed. Detailed designs and test work relating to critical components are to be completed and a market study is to be conducted.

  5. Advancing a Program of Research within a Nursing Faculty Role

    OpenAIRE

    Nolan, Marie T.; Wenzel, Jennifer; Han, Hae-Ra.; Allen, Jerilyn K.; Paez, Kathryn A.; Mock, Victoria

    2008-01-01

    Doctoral students and new faculty members often seek advice from more senior faculty on how to advance their program of research. Students may ask whether they should choose the manuscript option for their dissertation or whether they should seek a postdoctoral fellowship. New faculty members wonder whether they should pursue a career development (K) award and whether they need a mentor as they strive to advance their research while carrying out teaching, service, and practice responsibilitie...

  6. Technical review of Westinghouse`s Advanced Turbine Systems Program

    Energy Technology Data Exchange (ETDEWEB)

    Diakunchak, I.S.; Bannister, R.L. [Westinghouse Electric Corp., Orlando, FL (United States)

    1995-10-01

    U.S. Department of Energy, Office of Fossil Energy Advanced Turbine Systems (ATS) Program is an ambitious program to develop the necessary technologies, which will result in a significant increase in natural gas-fired power generation plant efficiency, a decrease in cost of electricity and a decrease in harmful emissions. In Phase 1 of the ATS Program, preliminary investigations on different gas turbine cycles demonstrated that net plant efficiency greater than 60% could be achieved. The more promising cycles were evaluated in more detail in Phase 2 in order to select the one that would achieve all of the program goals. The closed-loop cooled combined cycle was selected because it offered the best solution with the least risk for exceeding the ATS Program goals of net plant efficiency, emissions, cost of electricity, reliability, availability, and maintainability (RAM), and commercialization in the year 2000. The Westinghouse ATS plant is based on an advanced gas turbine design combined with an advanced steam. turbine and a high efficiency generator. To enhance achievement of the challenging performance, emissions, and RAM goals, current technologies are being extended and new technologies developed. The attainment of ATS performance goal necessitates advancements in aerodynamics, sealing, cooling, coatings, and materials technologies. To reduce emissions to the required levels, demands a development effort in the following combustion technology areas: premixed ultra low NOx combustion, catalytic combustion, combustion instabilities, and optical diagnostics. To achieve the RAM targets, requires the utilization of proven design features, with quantified risk analysis, and advanced materials, coatings, and cooling technologies. Phase 2 research and development projects currently in progress, as well as those planned for Phase 3, will result in advances in gas turbine technology and greatly contribute to ATS Program success.

  7. NASA advanced turboprop research and concept validation program

    Science.gov (United States)

    Whitlow, John B., Jr.; Sievers, G. Keith

    1988-01-01

    NASA has determined by experimental and analytical effort that use of advanced turboprop propulsion instead of the conventional turbofans in the older narrow-body airline fleet could reduce fuel consumption for this type of aircraft by up to 50 percent. In cooperation with industry, NASA has defined and implemented an Advanced Turboprop (ATP) program to develop and validate the technology required for these new high-speed, multibladed, thin, swept propeller concepts. This paper presents an overview of the analysis, model-scale test, and large-scale flight test elements of the program together with preliminary test results, as available.

  8. Research on the Academic Benefits of the Advanced Placement Program

    Directory of Open Access Journals (Sweden)

    Russell T. Warne

    2017-01-01

    Full Text Available With more than 3 million participants per year, the Advanced Placement (AP program is one of the most popular programs in the United States for exposing high-achieving high school students to advanced academic content. Sponsored by the College Board, the AP program provides a framework in which high school teachers can teach introductory college-level courses to high school students. These students then take one of 34 standardized tests at the end of the year, and students who score well on their course’s AP test can receive college credit from their university in which they later enroll. Despite the popularity of the AP program, remarkably little independent research has been conducted on the academic benefits of AP. In this article, I summarize the state of knowledge about the academic benefits of AP. Previous research and descriptive data indicate that AP students outperform non-AP students on a variety of academic measures, but many other aspects of the program are poorly understood, partially due to variability across AP subjects. These aspects include the causal impact of AP, which components of the program are most effective in boosting academic achievement, and how students engage with the AP program. I also conclude by making suggestions for researchers to use new methodologies to investigate new scientific and policy questions and new student populations to improve the educational scholars’ and practitioners’ understanding of the AP program.

  9. 77 FR 65395 - Air Cargo Advance Screening (ACAS) Pilot Program

    Science.gov (United States)

    2012-10-26

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HOMELAND SECURITY U.S. Customs and Border Protection Air Cargo Advance Screening (ACAS) Pilot Program Correction In notice document 2012-26031 appearing on pages 65006-65009 in the issue of October 24, 2012 make the...

  10. INL Advanced Radiotherapy Research Program Annual Report 2004

    Energy Technology Data Exchange (ETDEWEB)

    James Venhuizen

    2005-06-01

    This report summarizes the activities and major accomplishments for the Idaho National Laboratory Advanced Radiotherapy Research Program for calendar year 2004. Topics covered include boron analysis in biological samples, computational dosimetry and treatment planning software development, medical neutron source development and characterization, and collaborative dosimetry studies at the RA-1 facility in Buenos Aires, Argentina.

  11. DOE/NREL Advanced Wind Turbine Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Butterfield, C.P.; Smith, B.; Laxson, A.; Thresher, B. (National Renewable Energy Lab., Golden, CO (United States)); Goldman, P. (USDOE Assistant Secretary for Conservation and Renewable Energy, Washington, DC (United States). Wind/Hydro/Ocean Technologies Div.)

    1993-05-01

    The development of technologically advanced, high-efficiency wind turbines continues to be a high-priority activity of the US wind industry. The National Renewable Energy Laboratory (formerly the Solar Energy Research Institute), sponsored by the US Department of Energy (DOE), has initiated the Advanced Wind Turbine Program to assist the wind industry in the development of a new class of advanced wind turbines. The initial phase of the program focused on developing conceptual designs for near-term and advanced turbines. The goal of the second phase of this program is to use the experience gained over the last decade of turbine design and operation combined with the latest existing design tools to develop a turbine that will produce energy at $0.05 per kilowatt-hour (kWh) in a 5.8-m/s (13-mph) wind site. Three contracts have been awarded, and two more are under negotiation in the second phase. The third phase of the program will use new innovations and state-of-the-art wind turbine design technology to produce a turbine that will generate energy at $0.04/kWh in a 5.8-m/s wind site. Details of the third phase will be announced in early 1993.

  12. Advanced CNC Programming (EZ-CAM). 439-366.

    Science.gov (United States)

    Casey, Joe

    This document contains two units for an advanced course in computer numerical control (CNC) for computer-aided manufacturing. It is intended to familiarize students with the principles and techniques necessary to create proper CNC programs using computer software. Each unit consists of an introduction, instructional objectives, learning materials,…

  13. INEEL Advanced Radiotherapy Research Program Annual Report for 2002

    Energy Technology Data Exchange (ETDEWEB)

    J. R. Venhuizen

    2003-05-01

    This report summarizes the activities and major accomplishments for the Idaho National Engineering and Environmental Laboratory (INEEL) Advanced Radiotherapy Research Program for calendar year 2002. Topics covered include computational dosimetry and treatment planning software development, medical neutron source development and characterization, and boron analytical chemistry.

  14. INEEL Advanced Radiotherapy Research Program Annual Report 2002

    Energy Technology Data Exchange (ETDEWEB)

    Venhuizen, J.R.

    2003-05-23

    This report summarizes the activities and major accomplishments for the Idaho National Engineering and Environmental Laboratory (INEEL) Advanced Radiotherapy Research Program for calendar year 2002. Topics covered include computational dosimetry and treatment planning software development, medical neutron source development and characterization, and boron analytical chemistry.

  15. Advanced Thermionic Technology Program: summary report. Volume 4. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1984-10-01

    This report summarizes the progress made by the Advanced Thermionic Technology Program during the past several years. This Program, sponsored by the US Department of Energy, has had as its goal adapting thermionic devices to generate electricity in a terrestrial (i.e., combustion) environment. Volume 4 (Part E) is a highly technical discussion of the attempts made by the Program to push the state-of-the-art beyond the current generation of converters and is directed toward potential researchers engaged in this same task. These technical discussions are complemented with Appendices where appropriate.

  16. Advanced lectures on multiprocessor programming (1/3)

    CERN Multimedia

    CERN. Geneva

    2011-01-01

    Three classes (60 mins) on Multiprocessor Programming Prof. Dr. Christoph von Praun Georg-Simon-Ohm University of Applied Sciences Nuremberg, Germany This is an advanced class on multiprocessor programming. The class gives an introduction to principles of concurrent objects and the notion of different progress guarantees that concurrent computations can have. The focus of this class is on non-blocking computations, i.e. concurrent programs that do not make use of locks. We discuss the implementation of practical non-blocking data structures in detail. 1st class: Introduction to concurrent objects 2nd class: Principles of non-blocking synchronization 3rd class: Concurrent queues Brief Bio of Christoph von Praun Christoph worked on a variety of analysis techniques and runtime platforms for parallel programs. Hist most recent research studies programming models and tools that support transactional synchronization. In prior work, which he also did at the IBM T.J. Watson Research Center in Yorktown Height...

  17. Proceedings of the Ninth Annual Summer Conference: NASA/USRA University Advanced Aeronautics Design Program and Advanced Space Design Program

    Science.gov (United States)

    1993-01-01

    The NASA/USRA University Advanced Design Program was established in 1984 as an attempt to add more and better design education to primarily undergraduate engineering programs. The original focus of the pilot program encompassing nine universities and five NASA centers was on space design. Two years later, the program was expanded to include aeronautics design with six universities and three NASA centers participating. This year marks the last of a three-year cycle of participation by forty-one universities, eight NASA centers, and one industry participant. The Advanced Space Design Program offers universities an opportunity to plan and design missions and hardware that would be of usc in the future as NASA enters a new era of exploration and discovery, while the Advanced Aeronautics Design Program generally offers opportunities for study of design problems closer to the present time, ranging from small, slow-speed vehicles to large, supersonic and hypersonic passenger transports. The systems approach to the design problem is emphasized in both the space and aeronautics projects. The student teams pursue the chosen problem during their senior year in a one- or two-semester capstone design course and submit a comprehensive written report at the conclusion of the project. Finally, student representatives from each of the universities summarize their work in oral presentations at the Annual Summer Conference, sponsored by one of the NASA centers and attended by the university faculty, NASA and USRA personnel and aerospace industry representatives. As the Advanced Design Program has grown in size, it has also matured in terms of the quality of the student projects. The present volume represents the student work accomplished during the 1992-1993 academic year reported at the Ninth Annual Summer Conference hosted by NASA Lyndon B. Johnson Space Center, June 14-18, 1993.

  18. Advanced Turbine Systems (ATS) program conceptual design and product development

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-31

    Achieving the Advanced Turbine Systems (ATS) goals of 60% efficiency, single-digit NO{sub x}, and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NO{sub x} emission. Improved coatings and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal. GE`s view of the market, in conjunction with the industrial and utility objectives, requires the development of Advanced Gas Turbine Systems which encompass two potential products: a new aeroderivative combined-cycle system for the industrial market, and a combined-cycle system for the utility sector that is based on an advanced frame machine. The GE Advanced Gas Turbine Development program is focused on two specific products: (1) a 70 MW class industrial gas turbine based on the GE90 core technology utilizing an innovative air cooling methodology; (2) a 200 MW class utility gas turbine based on an advanced Ge heavy-duty machine utilizing advanced cooling and enhancement in component efficiency. Both of these activities required the identification and resolution of technical issues critical to achieving ATS goals. The emphasis for the industrial ATS was placed upon innovative cycle design and low emission combustion. The emphasis for the utility ATS was placed on developing a technology base for advanced turbine cooling, while utilizing demonstrated and planned improvements in low emission combustion. Significant overlap in the development programs will allow common technologies to be applied to both products. GE Power Systems is solely responsible for offering GE products for the industrial and utility markets.

  19. INEEL Advanced Radiotherapy Research Program Annual Report 2001

    Energy Technology Data Exchange (ETDEWEB)

    Venhuizen, James R.

    2002-04-30

    This report summarizes the major activities and accomplishments of the Idaho National Engineering and Environmental Laboratory (INEEL) Advanced Radiotherapy Research Program for calendar year 2001. Applications of supportive research and development, as well as technology deployment in the fields of chemistry, radiation physics and dosimetry, and neutron source design and demonstration are described. Contributions in the fields of physics and biophysics include development of advanced patient treatment planning software, feasibility studies of accelerator neutron source technology for Neutron Capture Therapy (NCT), and completion of major modifications to the research reactor at Washington State University to produce an epithermal-neutron beam for NCT research applications.

  20. INEEL Advanced Radiotherapy Research Program Annual Report 2001

    Energy Technology Data Exchange (ETDEWEB)

    Venhuizen, James Robert

    2002-04-01

    This report summarizes the major activities and accomplishments of the Idaho National Engineering and Environmental Laboratory (INEEL) Advanced Radiotherapy Research Program for calendar year 2001. Applications of supportive research and development, as well as technology deployment in the fields of chemistry, radiation physics and dosimetry, and neutron source design and demonstration are described. Contributions in the fields of physics and biophysics include development of advanced patient treatment planning software, feasibility studies of accelerator neutron source technology for Neutron Capture Therapy (NCT), and completion of major modifications to the research reactor at Washington State University to produce an epithermal-neutron beam for NCT research applications.

  1. Fossil Energy Advanced Research and Technology Development Materials Program

    Energy Technology Data Exchange (ETDEWEB)

    Cole, N.C.; Judkins, R.R. (comps.)

    1992-12-01

    Objective of this materials program is to conduct R and D on materials for fossil energy applications with focus on longer-term and generic needs of the various fossil fuel technologies. The projects are organized according to materials research areas: (1) ceramics, (2) new alloys: iron aluminides, advanced austenitics and chromium niobium alloys, and (3) technology development and transfer. Separate abstracts have been prepared.

  2. Mentoring Faculty: Results from National Science Foundation's ADVANCE Program

    Science.gov (United States)

    Holmes, M. A.

    2015-12-01

    Faculty mentoring programs are common components of National Science Foundation ADVANCE awards. The ADVANCE program aims to increase the number of women on the faculty in science, technology, engineering and mathematics (STEM) departments through grants to individuals and to entire institutions. These grants target a change in institutional culture so that faculty from non-majority groups will succeed and thrive. Mentoring programs are generally designed to fit the particular institution(s) or target population (e.g., meteorologists at the beginning of their careers). A successful mentoring program makes the implicit knowledge necessary for faculty success explicit: policies and practices are made transparent; routes for finding answers are clarified or generated with faculty input; faculty overcome a sense of isolation and develop a community. Mentoring programs may be formal, with assigned mentors and mentees, or informal, with opportunities for beginning, middle and advanced career STEM faculty to mingle, generally over food and sometimes with a formal speaker. The programs are formally evaluated; in general, attention to mentoring generates better outcomes for all faculty. Research indicates that most successful scientists have a network of mentors rather than relying on one person to help navigate department, institution, and profession. The University of Nebraska-Lincoln's (UNL) award, ADVANCE-Nebraska, offered opportunities for faculty to informally network over luncheons with women speakers, advanced in their careers. We also offered after-hours networking receptions. In response to faculty feedback, we shifted to a series of panel discussions entitled "Conversations". Most panels were conducted by successful UNL faculty; about one-third had an outside expert on a given topic. Topics were chosen based on faculty feedback and targeted specifically to beginning faculty (How to Start Up a Lab; How to Balance Teaching and Writing), mid-career faculty (Putting

  3. Current Status of Fellowship Programs for Advanced Practice Registered Nurses in the Nurse Practitioner Role.

    Science.gov (United States)

    Camal Sanchez, Carlos Alberto

    Students completing an advanced practice RN program for practice as a nurse practitioner may seek options for further advancement. Although postgraduate clinical fellowship programs exist, information about such programs is not readily available. This article offers a resource for faculty to assist graduate students in finding advanced practice RN nurse practitioner fellowship programs in the United States.

  4. Energy Efficient Engine program advanced turbofan nacelle definition study

    Science.gov (United States)

    Howe, David C.; Wynosky, T. A.

    1985-01-01

    Advanced, low drag, nacelle configurations were defined for some of the more promising propulsion systems identified in the earlier Benefit/Cost Study, to assess the benefits associated with these advanced technology nacelles and formulate programs for developing these nacelles and low volume thrust reversers/spoilers to a state of technology readiness in the early 1990's. The study results established the design feasibility of advanced technology, slim line nacelles applicable to advanced technology, high bypass ratio turbofan engines. Design feasibility was also established for two low volume thrust reverse/spoiler concepts that meet or exceed the required effectiveness for these engines. These nacelle and thrust reverse/spoiler designs were shown to be applicable in engines with takeoff thrust sizes ranging from 24,000 to 60,000 pounds. The reduced weight, drag, and cost of the advanced technology nacelle installations relative to current technology nacelles offer a mission fuel burn savings ranging from 3.0 to 4.5 percent and direct operating cost plus interest improvements from 1.6 to 2.2 percent.

  5. NASA's Advanced Information Systems Technology (AIST) Program: Advanced Concepts and Disruptive Technologies

    Science.gov (United States)

    Little, M. M.; Moe, K.; Komar, G.

    2014-12-01

    NASA's Earth Science Technology Office (ESTO) manages a wide range of information technology projects under the Advanced Information Systems Technology (AIST) Program. The AIST Program aims to support all phases of NASA's Earth Science program with the goal of enabling new observations and information products, increasing the accessibility and use of Earth observations, and reducing the risk and cost of satellite and ground based information systems. Recent initiatives feature computational technologies to improve information extracted from data streams or model outputs and researchers' tools for Big Data analytics. Data-centric technologies enable research communities to facilitate collaboration and increase the speed with which results are produced and published. In the future NASA anticipates more small satellites (e.g., CubeSats), mobile drones and ground-based in-situ sensors will advance the state-of-the-art regarding how scientific observations are performed, given the flexibility, cost and deployment advantages of new operations technologies. This paper reviews the success of the program and the lessons learned. Infusion of these technologies is challenging and the paper discusses the obstacles and strategies to adoption by the earth science research and application efforts. It also describes alternative perspectives for the future program direction and for realizing the value in the steps to transform observations from sensors to data, to information, and to knowledge, namely: sensor measurement concepts development; data acquisition and management; data product generation; and data exploitation for science and applications.

  6. Advanced gas cooled nuclear reactor materials evaluation and development program

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-01

    Results of work performed from January 1, 1977 through March 31, 1977 on the Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development Program are presented. The objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Process Heat and Direct Cycle Helium Turbine (DCHT) applications, in terms of the effect of simulated reactor primary coolant (impure Helium), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Work covered in this report includes progress to date on alloy selection for VHTR Nuclear Process Heat (NPH) applications and for DCHT applications. The present status on the simulated reactor helium loop design and on designs for the testing and analysis facilities and equipment is discussed.

  7. National Center for Advanced Information Components Manufacturing. Program summary report, Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    The National Center for Advanced Information Components Manufacturing focused on manufacturing research and development for flat panel displays, advanced lithography, microelectronics, and optoelectronics. This report provides an overview of the program, summaries of the technical projects, and key program accomplishments.

  8. Advanced diesel engine component development program, tasks 4-14

    Science.gov (United States)

    Kaushal, Tony S.; Weber, Karen E.

    1994-01-01

    This report summarizes the Advanced Diesel Engine Component Development (ADECD) Program to develop and demonstrate critical technology needed to advance the heavy-duty low heat rejection engine concept. Major development activities reported are the design, analysis, and fabrication of monolithic ceramic components; vapor phase and solid film lubrication; electrohydraulic valve actuation; and high pressure common rail injection. An advanced single cylinder test bed was fabricated as a laboratory tool in studying these advanced technologies. This test bed simulates the reciprocator for a system having no cooling system, turbo compounding, Rankine bottoming cycle, common rail injection, and variable valve actuation to achieve fuel consumption of 160 g/kW-hr (.26 lb/hp-hr). The advanced concepts were successfully integrated into the test engine. All ceramic components met their functional and reliability requirements. The firedeck, cast-in-place ports, valves, valve guides, piston cap, and piston ring were made from silicon nitride. Breakthroughs required to implement a 'ceramic' engine included the fabrication of air-gap cylinder heads, elimination of compression gaskets, machining of ceramic valve seats within the ceramic firedeck, fabrication of cast-in-place ceramic port liners, implementation of vapor phase lubrication, and elimination of the engine coolant system. Silicon nitride valves were successfully developed to meet several production abuse test requirements and incorporated into the test bed with a ceramic valve guide and solid film lubrication. The ADECD cylinder head features ceramic port shields to increase insulation and exhaust energy recovery. The combustion chamber includes a ceramic firedeck and piston cap. The tribological challenge posed by top ring reversal temperatures of 550 C was met through the development of vapor phase lubrication using tricresyl phosphate at the ring-liner interface. A solenoid-controlled, variable valve actuation system

  9. [Advanced accelerator R and D program]. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    This proposal requests funding for a 3-year renewal of the DOE advanced accelerator R and D (AARD) program at Texas A and M University. The program to date has focused on the development of the gigatron, a compact high-efficiency microwave driver for future linear colliders. The author reports results and progress in that project, and plans to bring it to a milestone and conclusion by mid-1995. He proposes to initiate a second project, the development of a new technology for ultra-high field superconducting magnets for future hadron colliders. This project builds upon two magnet designs which he has introduced during the past year, which have the potential for a dramatic extension of the achievable field strength for both dipoles and quadrupoles.

  10. Materials/manufacturing element of the Advanced Turbine Systems Program

    Energy Technology Data Exchange (ETDEWEB)

    Karnitz, M.A.; Holcomb, R.S.; Wright, I.G. [Oak Ridge National Lab., TN (United States)] [and others

    1995-10-01

    The technology based portion of the Advanced Turbine Systems Program (ATS) contains several subelements which address generic technology issues for land-based gas-turbine systems. One subelement is the Materials/Manufacturing Technology Program which is coordinated by DOE-Oak Ridge Operations and Oak Ridge National Laboratory (ORNL). The work in this subelement is being performed predominantly by industry with assistance from universities and the national laboratories. Projects in this subelement are aimed toward hastening the incorporation of new materials and components in gas turbines. A materials/manufacturing plan was developed in FY 1994 with input from gas turbine manufacturers, materials suppliers, universities, and government laboratories. The plan outlines seven major subelements which focus on materials issues and manufacturing processes. Work is currently under way in four of the seven major subelements. There are now major projects on coatings and process development, scale-up of single crystal airfoil manufacturing technology, materials characterization, and technology information exchange.

  11. Proceedings of the Advanced Turbine Systems annual program review meeting

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-31

    Goals of the 8-year program are to develop cleaner, more efficient, and less expensive gas turbine systems for utility and industrial electric power generation, cogeneration, and mechanical drive units. During this Nov. 9-11, 1994, meeting, presentations on energy policy issues were delivered by representatives of regulatory, industry, and research institutions; program overviews and technical reviews were given by contractors; and ongoing and proposed future projects sponsored by university and industry were presented and displayed at the poster session. Panel discussions on distributed power and Advanced Gas Systems Research education provided a forum for interactive dialog and exchange of ideas. Exhibitors included US DOE, Solar Turbines, Westinghouse, Allison Engine Co., and GE.

  12. Intensive Research Program on Advances in Nonsmooth Dynamics 2016

    CERN Document Server

    Jeffrey, Mike; Lázaro, J; Olm, Josep

    2017-01-01

    This volume contains extended abstracts outlining selected talks and other selected presentations given by participants throughout the "Intensive Research Program on Advances in Nonsmooth Dynamics 2016", held at the Centre de Recerca Matemàtica (CRM) in Barcelona from February 1st to April 29th, 2016. They include brief research articles reporting new results, descriptions of preliminary work or open problems, and outlines of prominent discussion sessions. The articles are all the result of direct collaborations initiated during the research program. The topic is the theory and applications of Nonsmooth Dynamics. This includes systems involving elements of: impacting, switching, on/off control, hybrid discrete-continuous dynamics, jumps in physical properties, and many others. Applications include: electronics, climate modeling, life sciences, mechanics, ecology, and more. Numerous new results are reported concerning the dimensionality and robustness of nonsmooth models, shadowing variables, numbers of limit...

  13. Advanced Platform Systems Technology study. Volume 4: Technology advancement program plan

    Science.gov (United States)

    1983-01-01

    An overview study of the major technology definition tasks and subtasks along with their interfaces and interrelationships is presented. Although not specifically indicated in the diagram, iterations were required at many steps to finalize the results. The development of the integrated technology advancement plan was initiated by using the results of the previous two tasks, i.e., the trade studies and the preliminary cost and schedule estimates for the selected technologies. Descriptions for the development of each viable technology advancement was drawn from the trade studies. Additionally, a logic flow diagram depicting the steps in developing each technology element was developed along with descriptions for each of the major elements. Next, major elements of the logic flow diagrams were time phased, and that allowed the definition of a technology development schedule that was consistent with the space station program schedule when possible. Schedules show the major milestone including tests required as described in the logic flow diagrams.

  14. Space Technology Mission Directorate Game Changing Development Program FY2015 Annual Program Review: Advanced Manufacturing Technology

    Science.gov (United States)

    Vickers, John; Fikes, John

    2015-01-01

    The Advance Manufacturing Technology (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of the Initiative is the Advanced Manufacturing National Program Office (AMNPO), which includes participation from all federal agencies involved in U.S. manufacturing. In support of the AMNPO the AMT Project supports building and Growing the National Network for Manufacturing Innovation through a public-private partnership designed to help the industrial community accelerate manufacturing innovation. Integration with other projects/programs and partnerships: STMD (Space Technology Mission Directorate), HEOMD, other Centers; Industry, Academia; OGA's (e.g., DOD, DOE, DOC, USDA, NASA, NSF); Office of Science and Technology Policy, NIST Advanced Manufacturing Program Office; Generate insight within NASA and cross-agency for technology development priorities and investments. Technology Infusion Plan: PC; Potential customer infusion (TDM, HEOMD, SMD, OGA, Industry); Leverage; Collaborate with other Agencies, Industry and Academia; NASA roadmap. Initiatives include: Advanced Near Net Shape Technology Integrally Stiffened Cylinder Process Development (launch vehicles, sounding rockets); Materials Genome; Low Cost Upper Stage-Class Propulsion; Additive Construction with Mobile Emplacement (ACME); National Center for Advanced Manufacturing.

  15. Advancing Scholarship, Team Building, and Collaboration in a Hybrid Doctoral Program in Educational Leadership

    Science.gov (United States)

    Holmes, Barbara; Trimble, Meridee; Morrison-Danner, Dietrich

    2014-01-01

    Hybrid programs are changing the landscape of doctoral programs at American universities and colleges. The increased demand for hybrid doctoral programs, particularly for educational and career advancement, serves as an innovative way to increase scholarship, advance service, and promote leadership. Hybrid programs serve as excellent venues for…

  16. Building an advanced climate model: Program plan for the CHAMMP (Computer Hardware, Advanced Mathematics, and Model Physics) Climate Modeling Program

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    The issue of global warming and related climatic changes from increasing concentrations of greenhouse gases in the atmosphere has received prominent attention during the past few years. The Computer Hardware, Advanced Mathematics, and Model Physics (CHAMMP) Climate Modeling Program is designed to contribute directly to this rapid improvement. The goal of the CHAMMP Climate Modeling Program is to develop, verify, and apply a new generation of climate models within a coordinated framework that incorporates the best available scientific and numerical approaches to represent physical, biogeochemical, and ecological processes, that fully utilizes the hardware and software capabilities of new computer architectures, that probes the limits of climate predictability, and finally that can be used to address the challenging problem of understanding the greenhouse climate issue through the ability of the models to simulate time-dependent climatic changes over extended times and with regional resolution.

  17. Advanced parallel programming models research and development opportunities.

    Energy Technology Data Exchange (ETDEWEB)

    Wen, Zhaofang.; Brightwell, Ronald Brian

    2004-07-01

    There is currently a large research and development effort within the high-performance computing community on advanced parallel programming models. This research can potentially have an impact on parallel applications, system software, and computing architectures in the next several years. Given Sandia's expertise and unique perspective in these areas, particularly on very large-scale systems, there are many areas in which Sandia can contribute to this effort. This technical report provides a survey of past and present parallel programming model research projects and provides a detailed description of the Partitioned Global Address Space (PGAS) programming model. The PGAS model may offer several improvements over the traditional distributed memory message passing model, which is the dominant model currently being used at Sandia. This technical report discusses these potential benefits and outlines specific areas where Sandia's expertise could contribute to current research activities. In particular, we describe several projects in the areas of high-performance networking, operating systems and parallel runtime systems, compilers, application development, and performance evaluation.

  18. Advanced Industrial Materials (AIM) Program annual progress report, FY 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    The Advanced Industrial Materials (AIM) Program is a part of the Office of Industrial Technologies (OIT), Energy Efficiency and Renewable Energy, US Department of Energy (DOE). The mission of AIM is to support development and commercialization of new or improved materials to improve energy efficiency, productivity, product quality, and reduced waste in the major process industries. OIT has embarked on a fundamentally new way of working with industries--the Industries of the Future (IOF) strategy--concentrating on the major process industries that consume about 90% of the energy and generate about 90% of the waste in the industrial sector. These are the aluminum, chemical, forest products, glass, metalcasting, and steel industries. OIT has encouraged and assisted these industries in developing visions of what they will be like 20 or 30 years into the future, defining the drivers, technology needs, and barriers to realization of their visions. These visions provide a framework for development of technology roadmaps and implementation plans, some of which have been completed. The AIM Program supports IOF by conducting research and development on materials to solve problems identified in the roadmaps. This is done by National Laboratory/industry/university teams with the facilities and expertise needed to develop new and improved materials. Each project in the AIM Program has active industrial participation and support.

  19. Human Research Program Advanced Exercise Concepts (AEC) Overview

    Science.gov (United States)

    Perusek, Gail; Lewandowski, Beth; Nall, Marsha; Norsk, Peter; Linnehan, Rick; Baumann, David

    2015-01-01

    Exercise countermeasures provide benefits that are crucial for successful human spaceflight, to mitigate the spaceflight physiological deconditioning which occurs during exposure to microgravity. The NASA Human Research Program (HRP) within the Human Exploration and Operations Mission Directorate (HEOMD) is managing next generation Advanced Exercise Concepts (AEC) requirements development and candidate technology maturation to Technology Readiness Level (TRL) 7 (ground prototyping and flight demonstration) for all exploration mission profiles from Multi Purpose Crew Vehicle (MPCV) Exploration Missions (up to 21 day duration) to Mars Transit (up to 1000 day duration) missions. These validated and optimized exercise countermeasures systems will be provided to the ISS Program and MPCV Program for subsequent flight development and operations. The International Space Station (ISS) currently has three major pieces of operational exercise countermeasures hardware: the Advanced Resistive Exercise Device (ARED), the second-generation (T2) treadmill, and the cycle ergometer with vibration isolation system (CEVIS). This suite of exercise countermeasures hardware serves as a benchmark and is a vast improvement over previous generations of countermeasures hardware, providing both aerobic and resistive exercise for the crew. However, vehicle and resource constraints for future exploration missions beyond low Earth orbit will require that the exercise countermeasures hardware mass, volume, and power be minimized, while preserving the current ISS capabilities or even enhancing these exercise capabilities directed at mission specific physiological functional performance and medical standards requirements. Further, mission-specific considerations such as preservation of sensorimotor function, autonomous and adaptable operation, integration with medical data systems, rehabilitation, and in-flight monitoring and feedback are being developed for integration with the exercise

  20. 10 CFR 611.202 - Advanced Technology Vehicle Manufacturing Facility Award Program.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Advanced Technology Vehicle Manufacturing Facility Award... TECHNOLOGY VEHICLES MANUFACTURER ASSISTANCE PROGRAM Facility/Funding Awards § 611.202 Advanced Technology Vehicle Manufacturing Facility Award Program. DOE may issue, under the Advanced Technology Vehicle...

  1. Advancing patient care through innovative practice: the Clinical Partners Program.

    Science.gov (United States)

    Mehta, Bella H; Rodis, Jennifer L; Nahata, Milap C; Bennett, Marialice S

    2005-12-01

    The development, implementation, and outcomes assessment of an innovative pharmacist-managed ambulatory care and community pharmacy practice clinic are described. The Clinical Partners Program at The Ohio State University (OSU) provides an active learning environment for students and residents, offers a patient-focused practice model based on pharmaceutical care principles, and serves as an arena for applied research in pharmacy practice. The program offers multiple services, including anticoagulation management, diabetes self-management, cholesterol management, hepatitis C education, herbal product and dietary supplement consultations, medication management, smoking cessation, and wellness. The practice is currently staffed by two faculty members from the college of pharmacy, with a 0.8 full-time-equivalent (FTE) pharmacist and a 0.65 FTE community pharmacy resident. It has served as a training site for 17 pharmacy residents, 28 bachelor of science (B.S.) in pharmacy students, 30 post-B.S. doctor of pharmacy (Pharm.D.) students, and 132 entry-level Pharm.D. students at various levels of training. The most successful methods of reimbursement for programs have been contracted services with OSU Managed Health Care Systems, Inc., which serves OSU faculty and staff and fee-for-service billing, charged directly to non-OSU patients. Numerous studies have shown that Clinical Partners has consistently demonstrated improved therapeutic outcomes over those achieved in traditional practice. Faculty are exploring outreach services, including the development of advanced practice community sites for the college, establishing patient care services within physician offices, and providing disease management services for self-insured employers. The Clinical Partners Program has improved patient care and provided education and training opportunities for pharmacy students and residents.

  2. Advanced volume reduction program for LLW at JAERI

    Energy Technology Data Exchange (ETDEWEB)

    Higuchi, H.; Sato, M.; Hirabayashi, T.; Tanaka, M. [Japan Atomic Energy Research Inst., Dept. of Decommissioning and Waste Management, Naka, Ibaraki (Japan)

    2000-07-01

    The Japan Atomic Energy Research Institute (JAERI) has recently decided to adopt an advanced volume reduction program and started the construction of facilities, in which volume reduction techniques will be applied and achieved high volume reduction ratio and stabilization by means of melting or super compaction processes. It will be able to produce waste packages for final disposal and to reduce the amount of the wastes by operating the advanced volume reduction facilities. These facilities consist of Waste Size Reduction and Storage Facilities and Waste Volume Reduction Facilities; the former have cutting installations for large size wastes and the latter have melting units and a super compactor. The waste volume reduction will be carried out by a super compactor, a metal melting unit and a non-metal melting unit equipped plasma torch, and an annual processing capacity is around 10,000 drums of 200-liter size. The volume reduction ratio of waste is around 1/3 to 1/6. Molten metal is cast to receptacles for receiving molten slag from non-metal melting unit. Thus the amount of secondary wastes are reduced by utilizing the metallic wastes as receptacles. (authors)

  3. Advanced Concept Exploration for Fast Ignition Science Program, Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Stephens, Richard Burnite [General Atomics; McLean, Harry M. [Lawrence Livermore National Laboratory; Theobald, Wolfgang [Laboratory for Laser Energetics; Akli, Kramer U. [The Ohio State University; Beg, Farhat N. [University of California, San Diego; Sentoku, Yasuhiko [University of Nevada, Reno; Schumacher, Douglass W. [The Ohio State University; Wei, Mingsheng [General Atomics

    2013-09-04

    The Fast Ignition (FI) Concept for Inertial Confinement Fusion (ICF) has the potential to provide a significant advance in the technical attractiveness of Inertial Fusion Energy reactors. FI differs from conventional “central hot spot” (CHS) target ignition by decoupling compression from heating: using a laser (or heavy ion beam or Z pinch) drive pulse (10’s of nanoseconds) to create a dense fuel and a second, much shorter (~10 picoseconds) high intensity pulse to ignite a small volume within the dense fuel. The physics of fast ignition process was the focus of our Advanced Concept Exploration (ACE) program. Ignition depends critically on two major issues involving Relativistic High Energy Density (RHED) physics: The laser-induced creation of fast electrons and their propagation in high-density plasmas. Our program has developed new experimental platforms, diagnostic packages, computer modeling analyses, and taken advantage of the increasing energy available at laser facilities to advance understanding of the fundamental physics underlying these issues. Our program had three thrust areas: • Understand the production and characteristics of fast electrons resulting from FI relevant laser-plasma interactions and their dependence on laser prepulse and laser pulse length. • Investigate the subsequent fast electron transport in solid and through hot (FI-relevant) plasmas. • Conduct and understand integrated core-heating experiments by comparison to simulations. Over the whole period of this project (three years for this contract), we have greatly advanced our fundamental understanding of the underlying properties in all three areas: • Comprehensive studies on fast electron source characteristics have shown that they are controlled by the laser intensity distribution and the topology and plasma density gradient. Laser pre-pulse induced pre-plasma in front of a solid surface results in increased stand-off distances from the electron origin to the high density

  4. Advanced man-machine interface systems and advanced information management systems programs

    Energy Technology Data Exchange (ETDEWEB)

    Naser, J.; Gray, S.; Machiels, A. [Electric Power Research Institute, Palo Alto, CA (United States)

    1997-12-01

    The Advanced Light Water Reactor (ALWR) Program started in the early 1980`s. This work involves the development and NRC review of the ALWR Utility Requirements Documents, the development and design certification of ALWR designs, the analysis of the Early Site Permit process, and the First-of-a-Kind Engineering for two of the ALWR plant designs. ALWRs will embody modern proven technology. However, technologies expected to be used in these plants are changing very rapidly so that additional capabilities will become available that will be beneficial for future plants. To remain competitive on a life-cycle basis in the future, the ALWR must take advantage of the best and most modem technologies available. 1 ref.

  5. 75 FR 20085 - Subpart B-Advanced Biofuel Payment Program

    Science.gov (United States)

    2010-04-16

    ... Rural Business-Cooperative Service 7 CFR Part 4288 RIN 0570-AA75 Subpart B--Advanced Biofuel Payment... biofuels to support existing advanced biofuel production and to encourage new production of advanced biofuels. The Agency would enter into contracts with advanced biofuel producers to pay such producers for...

  6. Preparing Future Biology Faculty: An Advanced Professional Development Program for Graduate Students

    Science.gov (United States)

    Lockwood, Stephanie A.; Miller, Amanda J.; Cromie, Meghan M.

    2014-01-01

    Formal professional development programs for biology graduate students interested in becoming faculty members have come far; however, programs that provide advanced teaching experience for seasoned graduate teaching assistants are scarce. We outline an advanced program that focuses on further training of graduate teaching assistants in pedagogy…

  7. National Center for Advanced Information Components Manufacturing. Program summary report, Volume II

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    The National Center for Advanced Information Components Manufacturing focused on manufacturing research and development for flat panel displays, advanced lithography, microelectronics, and optoelectronics. This report provides an overview of the program, program history, summaries of the technical projects, and key program accomplishments.

  8. Advanced Lighting Program Development (BG9702800) Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Rubinstein, Francis; Johnson, Steve

    1998-02-01

    The report presents a long-range plan for a broad-based, coordinated research, development and market transformation program for reducing the lighting energy intensities in commercial and residential buildings in California without compromising lighting quality. An effective program to advance lighting energy efficiency in California must be based on an understanding that lighting is a mature field and the lighting industry has developed many specialized products that meet a wide variety of light needs for different building types. Above all else, the lighting field is diverse and there are applications for a wide range of lighting products, systems, and strategies. Given the range of existing lighting solutions, an effective energy efficient lighting research portfolio must be broad-based and diverse to match the diversity of the lighting market itself. The belief that there is one solution--a magic bullet, such as a better lamp, for example--that will propel lighting efficiency across all uses to new heights is, in the authors' opinion, an illusion. A multi-path program is the only effective means to raising lighting efficiency across all lighting applications in all building types. This report presents a list of 27 lighting technologies and concepts (key activities) that could form the basis of a coordinated research and market transformation plan for significantly reducing lighting energy intensities in California buildings. The total 27 key activities into seven broad classes as follows: Light sources; Ballasts; Luminaires; Lighting Controls; Lighting Systems in Buildings; Human Factors and Education. Each of the above technology classes is discussed in terms of background, key activities, and the energy savings potential for the state. The report concludes that there are many possibilities for targeted research, development, and market transformation activities across all sectors of the building lighting industry. A concerted investment by the state to

  9. Advanced Utility Mercury-Sorbent Field-Testing Program

    Energy Technology Data Exchange (ETDEWEB)

    Ronald Landreth

    2007-12-31

    This report summarizes the work conducted from September 1, 2003 through December 31, 2007 on the project entitled Advanced Utility Mercury-Sorbent Field-Testing Program. The project covers the testing at the Detroit Edison St. Clair Plant and the Duke Power Cliffside and Buck Stations. The St. Clair Plant used a blend of subbituminous and bituminous coal and controlled the particulate emissions by means of a cold-side ESP. The Duke Power Stations used bituminous coals and controlled their particulate emissions by means of hot-side ESPs. The testing at the Detroit Edison St. Clair Plant demonstrated that mercury sorbents could be used to achieve high mercury removal rates with low injection rates at facilities that burn subbituminous coal. A mercury removal rate of 94% was achieved at an injection rate of 3 lb/MMacf over the thirty day long-term test. Prior to this test, it was believed that the mercury in flue gas of this type would be the most difficult to capture. This is not the case. The testing at the two Duke Power Stations proved that carbon- based mercury sorbents can be used to control the mercury emissions from boilers with hot-side ESPs. It was known that plain PACs did not have any mercury capacity at elevated temperatures but that brominated B-PAC did. The mercury removal rate varies with the operation but it appears that mercury removal rates equal to or greater than 50% are achievable in facilities equipped with hot-side ESPs. As part of the program, both sorbent injection equipment and sorbent production equipment was acquired and operated. This equipment performed very well during this program. In addition, mercury instruments were acquired for this program. These instruments worked well in the flue gas at the St. Clair Plant but not as well in the flue gas at the Duke Power Stations. It is believed that the difference in the amount of oxidized mercury, more at Duke Power, was the difference in instrument performance. Much of the equipment was

  10. The ACP (Advanced Computer Program) multiprocessor system at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    Nash, T.; Areti, H.; Atac, R.; Biel, J.; Case, G.; Cook, A.; Fischler, M.; Gaines, I.; Hance, R.; Husby, D.

    1986-09-01

    The Advanced Computer Program at Fermilab has developed a multiprocessor system which is easy to use and uniquely cost effective for many high energy physics problems. The system is based on single board computers which cost under $2000 each to build including 2 Mbytes of on board memory. These standard VME modules each run experiment reconstruction code in Fortran at speeds approaching that of a VAX 11/780. Two versions have been developed: one uses Motorola's 68020 32 bit microprocessor, the other runs with AT and T's 32100. both include the corresponding floating point coprocessor chip. The first system, when fully configured, uses 70 each of the two types of processors. A 53 processor system has been operated for several months with essentially no down time by computer operators in the Fermilab Computer Center, performing at nearly the capacity of 6 CDC Cyber 175 mainframe computers. The VME crates in which the processing ''nodes'' sit are connected via a high speed ''Branch Bus'' to one or more MicroVAX computers which act as hosts handling system resource management and all I/O in offline applications. An interface from Fastbus to the Branch Bus has been developed for online use which has been tested error free at 20 Mbytes/sec for 48 hours. ACP hardware modules are now available commercially. A major package of software, including a simulator that runs on any VAX, has been developed. It allows easy migration of existing programs to this multiprocessor environment. This paper describes the ACP Multiprocessor System and early experience with it at Fermilab and elsewhere.

  11. Part A - Advanced turbine systems. Part B - Materials/manufacturing element of the Advanced Turbine Systems Program

    Energy Technology Data Exchange (ETDEWEB)

    Karnitz, M.A.

    1996-06-01

    The DOE Offices of Fossil Energy and Energy Efficiency and Renewable Energy have initiated a program to develop advanced turbine systems for power generation. The objective of the Advanced Turbine Systems (ATS) Program is to develop ultra-high efficiency, environmentally superior, and cost competitive gas turbine systems for utility and industrial applications. One of the supporting elements of the ATS Program is the Materials/Manufacturing Technologies Task. The objective of this element is to address the critical materials and manufacturing issues for both industrial and utility gas turbines.

  12. Overview of Westinghouse`s Advanced Turbine Systems Program

    Energy Technology Data Exchange (ETDEWEB)

    Bannister, R.L.; Bevc, F.P.; Diakunchak, I.S.; Huber, D.J. [Westinghouse Electric Corp., Orlando, FL (United States)

    1995-10-01

    Westinghouse`s experience with land based gas turbines started in 1945 with the development of a 2000 hp gas turbine-generator set that consisted of a single reduction gear, compressor, 12 combustors and turbine. A thermal efficiency of 18% was obtained. By 1954, Westinghouse had developed a 15 MW unit (with a regenerator and intercooler) that was designed for a full-load simple cycle efficiency of 29%. As the initial step in the Advanced Turbine Systems (ATS) program, Westinghouse has already developed a 230 MW gas turbine that has a simple cycle efficiency of 38.5% without the use of regeneration and intercooler concepts. In 1967, Westinghouse developed its first gas turbine combined cycle, a synergistic combination of the Brayton and the Rankine cycles. In a combined cycle the heat rejected by the higher temperature topping cycle is recovered in the lower temperature bottoming cycle to produce additional power from the energy initially released by the fuel. In this first Westinghouse combined cycle, a 1450{degrees}F burner outlet temperature gas turbine, rated at 25 MW, supplied exhaust heat which was used in a boiler to furnish steam to drive an 85 MW steam turbine. This plant achieved an annual average efficiency of 39.6%.

  13. Recovery Act - Sustainable Transportation: Advanced Electric Drive Vehicle Education Program

    Energy Technology Data Exchange (ETDEWEB)

    Caille, Gary

    2013-12-13

    The collective goals of this effort include: 1) reach all facets of this society with education regarding electric vehicles (EV) and plug–in hybrid electric vehicles (PHEV), 2) prepare a workforce to service these advanced vehicles, 3) create web–based learning at an unparalleled level, 4) educate secondary school students to prepare for their future and 5) train the next generation of professional engineers regarding electric vehicles. The Team provided an integrated approach combining secondary schools, community colleges, four–year colleges and community outreach to provide a consistent message (Figure 1). Colorado State University Ventures (CSUV), as the prime contractor, plays a key program management and co–ordination role. CSUV is an affiliate of Colorado State University (CSU) and is a separate 501(c)(3) company. The Team consists of CSUV acting as the prime contractor subcontracted to Arapahoe Community College (ACC), CSU, Motion Reality Inc. (MRI), Georgia Institute of Technology (Georgia Tech) and Ricardo. Collaborators are Douglas County Educational Foundation/School District and Gooru (www.goorulearning.org), a nonprofit web–based learning resource and Google spin–off.

  14. More than genes: the advanced fetal programming hypothesis.

    Science.gov (United States)

    Hocher, Berthold

    2014-10-01

    Many lines of data, initial epidemiologic studies as well as subsequent extensive experimental studies, indicate that early-life events play a powerful role in influencing later suceptibility to certain chronic diseases. Such events might be over- or undernutrition, exposure to environmental toxins, but also changes in hormones, in particular stress hormones. Typically, those events are triggered by the environmental challenges of the mother. However, recent studies have shown that paternal environmental or nutritional factors affect the phenotype of the offspring as well. The maternal and paternal environmental factors act on the phenotype of the offspring via epigenetic modification of its genome. The advanced fetal programming hypothesis proposes an additional non-environmentally driven mechanism: maternal and also paternal genes may influence the maturating sperm, the oocyte, and later the embryo/fetus, leading to their epigenetic alteration. Thus, the observed phenotype of the offspring may be altered by maternal/paternal genes independent of the fetal genome. Meanwhile, several independent association studies in humans dealing with metabolic and neurological traits also suggest that maternal genes might affect the offspring phenotype independent of the transmission of that particular gene to the offspring. Considering the implications of this hypothesis, some conclusions drawn from transgenic or knockout animal models and based on the causality between a genetic alteration and a phenotype, need to be challenged. Possible implications for the development, diagnostic and therapy of human genetic diseases have to be investigated. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  15. LEGO mindstorm masterpieces building and programming advanced robots

    CERN Document Server

    2003-01-01

    In LEGO Mindstorm Masterpieces, some of the world's leading LEGO Mindstorms inventors share their knowledge and development secrets. The unique style of this book will allow it to cover an incredibly broad range of topics in unparalleled detail. Chapters within the book will include detailed discussions of the mechanics that drive the robot - and also provide step-by-step construction diagrams for each of the robots. This is perfect book for LEGO hobbyists looking to take their skills to the next level whether they build world-class competitive robots or just like to mess around for the fun of it.For experienced users of LEGO Mindstorms, LEGO Mindstorms Masterpiece is composed of three fundamental sections:·Part One: A review of the advanced robot building concepts and theories.·Part Two: Step-by-step building instructions for a series of complex models. The companion programming code is included, along with in-depth explanations of concepts needed for the specific models. Robots include Line Followers, Bip...

  16. Position Paper: General Practice Residency and Advanced Education in General Dentistry Programs: Evaluation.

    Science.gov (United States)

    Cassidy, Robert E.

    1983-01-01

    The currently used internal and external program evaluation processes for general practice residency and advanced education in general dentistry programs are discussed, noting accrediting and evaluation groups, criteria, and designs. A generalized evaluation plan is proposed. (MSE)

  17. Advanced hydropower turbine: AHTS-Advanced Hydropower Turbine System Program; Turbinas hidraulicas avancadas: Programa AHTS-Advanced Hydropower Turbine System

    Energy Technology Data Exchange (ETDEWEB)

    Macorin, Adriano De Figueiredo; Tomisawa, Alessandra Terumi; Van Deursen, Gustavo Jose Ferreira; Bermann, Celio [Universidade de Sao Paulo (USP), SP (Brazil)], email: brunosilva@usp.br

    2010-07-01

    Due to a privileged hydrography and energy policies that remounts to the beginning of the 20th century, Brazilian's electrical grid can be considered one of the cleanest in the world regarding the emission of atmospheric pollutants. Nevertheless, as in every human large enterprise, it is well known that hydroelectric power plants also lead to harmful environmental impacts. This article presents the AHTS Program (Advanced Hydropower Turbine System) started in 1994 in USA and developed to assess and conceive new hydro turbines to mitigate two of the main negative impacts of the installation and operation of this kind of power plant: (a) turbine-passed fish mortality and (b) the low dissolved oxygen - DO - levels downstream of the dams. The criteria used to concept the turbines are also justified in this article. As well as the modifications made in each case by the following companies: Alden Research Lab e o Northern Research and Engineering Corporation (ARL/NREC) and Voith Hydro (Voith). (author)

  18. 76 FR 14379 - Advanced Placement Incentive Program; Office of Elementary and Secondary Education; Overview...

    Science.gov (United States)

    2011-03-16

    ... programs, published in the Federal Register on December 15, 2010 (75 FR 78486) (2010 NFP). In accordance... NFP. Advanced placement test means an advanced placement test administered by the College Board or... assessments over a number of years in the ``all students'' group (NFP 2010). Program Authority: 20 U.S.C. 6531...

  19. Strategies for casualty mitigation programs by using advanced tsunami computation

    Science.gov (United States)

    IMAI, K.; Imamura, F.

    2012-12-01

    1. Purpose of the study In this study, based on the scenario of great earthquakes along the Nankai trough, we aim on the estimation of the run up and high accuracy inundation process of tsunami in coastal areas including rivers. Here, using a practical method of tsunami analytical model, and taking into account characteristics of detail topography, land use and climate change in a realistic present and expected future environment, we examined the run up and tsunami inundation process. Using these results we estimated the damage due to tsunami and obtained information for the mitigation of human casualties. Considering the time series from the occurrence of the earthquake and the risk of tsunami damage, in order to mitigate casualties we provide contents of disaster risk information displayed in a tsunami hazard and risk map. 2. Creating a tsunami hazard and risk map From the analytical and practical tsunami model (a long wave approximated model) and the high resolution topography (5 m) including detailed data of shoreline, rivers, building and houses, we present a advanced analysis of tsunami inundation considering the land use. Based on the results of tsunami inundation and its analysis; it is possible to draw a tsunami hazard and risk map with information of human casualty, building damage estimation, drift of vehicles, etc. 3. Contents of disaster prevention information To improve the hazard, risk and evacuation information distribution, it is necessary to follow three steps. (1) Provide basic information such as tsunami attack info, areas and routes for evacuation and location of tsunami evacuation facilities. (2) Provide as additional information the time when inundation starts, the actual results of inundation, location of facilities with hazard materials, presence or absence of public facilities and areas underground that required evacuation. (3) Provide information to support disaster response such as infrastructure and traffic network damage prediction

  20. Advanced Reactor Safety Program – Stakeholder Interaction and Feedback

    Energy Technology Data Exchange (ETDEWEB)

    Szilard, Ronaldo H. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Smith, Curtis L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-08-01

    In the Spring of 2013, the Idaho National Laboratory (INL) began discussions with industry stakeholders on how to upgrade our safety analysis capabilities. The focus of these improvements would primarily be on advanced safety analysis capabilities that could help the nuclear industry analyze, understand, and better predict complex safety problems. The current environment in the DOE complex is such that recent successes in high performance computer modeling and simulation could lead the nuclear industry to benefit from these advances, as long as an effort to translate these advances into realistic applications is made. Upgrading the nuclear industry modeling analysis capabilities is a significant effort that would require participation and coordination from all industry segments: research, engineering, vendors, and operations. We focus here on interactions with industry stakeholders to develop sound advanced safety analysis applications propositions that could have a positive impact on industry long term operation, hence advancing the state of nuclear safety.

  1. Advanced wellbore thermal simulator GEOTEMP2. Appendix. Computer program listing

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, R.F.

    1982-02-01

    This appendix gives the program listing of GEOTEMP2 with comments and discussion to make the program organization more understandable. This appendix is divided into an introduction and four main blocks of code: main program, program initiation, wellbore flow, and wellbore heat transfer. The purpose and use of each subprogram is discussed and the program listing is given. Flowcharts will be included to clarify code organization when needed. GEOTEMP2 was written in FORTRAN IV. Efforts have been made to keep the programing as conventional as possible so that GEOTEMP2 will run without modification on most computers.

  2. Advanced Placement Chemistry: Project Advance and the Advanced Placement Program: A Comparison of Students' Performance on the AP Chemistry Examination.

    Science.gov (United States)

    Mercurio, Joseph; And Others

    1984-01-01

    Compared performance of Syracuse University Project Advance (PA) chemistry students (N=35) with advanced placement (AP) candidates on the AP chemistry examination. PA students scored slightly above the national average on the examination, and students who performed well (B or better) in AP chemistry also did well on the examination. (JN)

  3. Building America: The Advanced Whole-Home Efficiency Program (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Engebrecht, C.

    2012-02-01

    This presentation discusses the Building America Program. This presentation discusses the background and goals of the program. A few hot topic technologies are discussed. Outreach activities are discussed as well.

  4. Advocacy training in US advanced pediatric dentistry training programs.

    Science.gov (United States)

    Amini, Homa; Casamassimo, Paul S; Lin, Hsuan L; Hayes, John R

    2008-01-01

    This study: (1) assessed pediatric dentistry residency program directors' attitudes toward and involvement in advocacy training; and (2) identified types and extent of advocacy training in U.S. pediatric dentistry programs. Between October 2005 and February 2006, all 66 pediatric dentistry residency program directors were invited to complete a 62-item online questionnaire. The survey investigated: (1) directors' attitudes toward advocacy training; (2) nature of advocacy training offered during residency; (3) extent of resident involvement in different settings; and (4) directors' involvement in advocacy. Forty-two program directors responded (64%). Overall, respondents agreed that advocacy by pediatric dentists for children beyond the dental office was important and that residency programs should provide advocacy training. Most programs did not routinely offer advocacy opportunities in nonclinical settings. Over half of programs required community outreach clinic rotations for all residents. One third offered didactic curriculum in the legislative process. Over 50% of program directors reported personal involvement in legislative oral health lobbying within 3 years, but fewer than a third were involved with professional political action committees (PACs). Advocacy is seen as on important in pediatric dentistry but variation in attitudes of program directors and program offerings exists in US training programs.

  5. Theoretical and algorithmic advances in multi-parametric programming and control

    KAUST Repository

    Pistikopoulos, Efstratios N.

    2012-04-21

    This paper presents an overview of recent theoretical and algorithmic advances, and applications in the areas of multi-parametric programming and explicit/multi-parametric model predictive control (mp-MPC). In multi-parametric programming, advances include areas such as nonlinear multi-parametric programming (mp-NLP), bi-level programming, dynamic programming and global optimization for multi-parametric mixed-integer linear programming problems (mp-MILPs). In multi-parametric/explicit MPC (mp-MPC), advances include areas such as robust multi-parametric control, multi-parametric nonlinear MPC (mp-NMPC) and model reduction in mp-MPC. A comprehensive framework for multi-parametric programming and control is also presented. Recent applications include a hydrogen storage device, a fuel cell power generation system, an unmanned autonomous vehicle (UAV) and a hybrid pressure swing adsorption (PSA) system. © 2012 Springer-Verlag.

  6. An automated competency-based student performance assessment program for advanced pharmacy practice experiential programs.

    Science.gov (United States)

    Ried, L Douglas; Nemire, Ruth; Doty, Randell; Brickler, Mildred P; Anderson, Holly H; Frenzel-Shepherd, Elizabeth; Larose-Pierre, Margareth; Dugan, Dee

    2007-12-15

    To describe the development and preliminary outcomes of the System of Universal Clinical Competency Evaluation in the Sunshine State (SUCCESS) for preceptors to assess students' clinical performance in advanced pharmacy practice experiences (APPEs). An Internet-based APPE assessment tool was developed by faculty members from colleges of pharmacy in Florida and implemented. Numeric scores and grades derived from the SUCCESS algorithm were similar to preceptors' comparison grades. The average SUCCESS GPA was slightly higher compared to preceptors' scores (0.02 grade points). The SUCCESS program met its goals, including establishing a common set of forms, standardized assessment criteria, an objective document that is accessible on the Internet, and standardized grading, and reducing pressure on preceptors from students concerning their grades.

  7. From Ground to Distance: The Impact of Advanced Technologies on an Innovative School Leadership Program

    Science.gov (United States)

    Korach, Susan; Agans, Lyndsay J.

    2011-01-01

    An educational leadership preparation program for the 21st Century not only makes use of innovations in teaching and learning, but pushes the educational experience forward through the effective use of advanced technologies. This idea frames the delivery methodology for a blended online principal preparation program. The blended online program was…

  8. Large Space Telescope (LST) Pointing Control System (PCS) analytical Advanced Technical Development (ATD) program

    Science.gov (United States)

    Seltzer, S. M.

    1974-01-01

    The large space telescope (LST) pointing control system (PCS) advanced technical development (ATD) program is described. The approach used is to describe the overall PCS development effort, showing how the analytical ATD program elements fit into it. Then the analytical ATD program elements are summarized.

  9. Corporate Mentors and Undergraduate Students: A Qualitative Study of the Advancing Women in Construction Mentorship Program

    Science.gov (United States)

    Eicher, Matthew

    2013-01-01

    In a conscious effort to combat the low enrollment of women in construction management, a program was created to retain women through a mentorship program--Advancing Women in Construction. A qualitative analysis, facilitated through a grounded theory approach, sought to understand if the program was indeed successful, and what value did the…

  10. Advanced Industrial Materials Program. Annual progress report, FY 1993

    Energy Technology Data Exchange (ETDEWEB)

    Stooksbury, F. [comp.

    1994-06-01

    Mission of the AIM program is to commercialize new/improved materials and materials processing methods that will improve energy efficiency, productivity, and competitiveness. Program investigators in the DOE national laboratories are working with about 100 companies, including 15 partners in CRDAs. Work is being done on intermetallic alloys, ceramic composites, metal composites, polymers, engineered porous materials, and surface modification. The program supports other efforts in the Office of Industrial Technologies to assist the energy-consuming process industries. The aim of the AIM program is to bring materials from basic research to industrial application to strengthen the competitive position of US industry and save energy.

  11. Bridging the Geoscientist Workforce Gap: Advanced High School Geoscience Programs

    Science.gov (United States)

    Schmidt, Richard William

    2013-01-01

    The purpose of this participatory action research was to create a comprehensive evaluation of advanced geoscience education in Pennsylvania public high schools and to ascertain the possible impact of this trend on student perceptions and attitudes towards the geosciences as a legitimate academic subject and possible career option. The study builds…

  12. Interprofessional development and implementation of a pharmacist professional advancement and recognition program.

    Science.gov (United States)

    Hager, David; Chmielewski, Eric; Porter, Andrea L; Brzozowski, Sarah; Rough, Steve S; Trapskin, Philip J

    2017-11-15

    The interprofessional development, implementation, and outcomes of a pharmacist professional advancement and recognition program (PARP) at an academic medical center are described. Limitations of the legacy advancement program, in combination with low rates of employee engagement in peer recognition and professional development, at the UW Health department of pharmacy led to the creation of a task force comprising pharmacists from all practice areas to develop a new pharmacist PARP. Senior leadership within the organization expanded the scope of the project to include an interprofessional work group tasked to develop guidelines and core principles that other professional staff could use to reduce variation across advancement and recognition programs. Key program design elements included a triennial review of performance against advancement standards and the use of peer review to supplement advancement decisions. The primary objective was to meaningfully improve pharmacists' engagement as measured through employee engagement surveys. Secondary outcomes of interest included the results of pharmacist and management satisfaction surveys and the program's impact on the volume and mix of pharmacist professional development activities. Of the 126 eligible pharmacists, 93 participated in the new program. The majority of pharmacists was satisfied with the program. For pharmacists who were advanced as part of the program, meaningful increases in employee engagement scores were observed, and a mean of 95 hours of professional development and quality-improvement activities was documented. Implementation of a PARP helped increase pharmacist engagement through participation in quality-improvement and professional development activities. The program also led to the creation of organizationwide interprofessional guidelines for advancement programs within various healthcare disciplines. Copyright © 2017 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  13. The projects of skunk works 75 years of Lockheed Martin's advanced development programs

    CERN Document Server

    Pace, Steve

    2016-01-01

    The Projects of Skunk Works examines 75 years of Lockheed Martin's advanced development programs, from jet fighters to missiles, heavy-lift helicopters, a lighter-than-air ship, drones, and a stealth boat.

  14. Summary of the FY 2005 Batteries for Advanced Transportation Technologies (BATT) research program annual review

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2005-08-01

    This document presents a summary of the evaluation and comments provided by the review panel for the FY 2005 Department of Energy (DOE) Batteries for Advanced Transportation Technologies (BATT) program annual review.

  15. A case study of the Advanced Amphibious Assault Vehicle (AAVP) program from a contracting perspective

    OpenAIRE

    Dalton, Ronald R.

    1998-01-01

    This research effort focused on the contracting history of the U.S. Marine Corps Advanced Amphibious Assault Vehicle (AAAV) Program. The research answered the primary question of what were the critical contracting decisions that have been made during the program and how would an analysis of these contracting decisions affect the future of the AAAV program. Interviews were conducted with personnel from the AAAV program office and other Government agencies as well as with contractor employees. ...

  16. A cross-sectional survey comparing a free treatment program for advanced schistosomiasis japonica to a general assistance program.

    Science.gov (United States)

    Song, Langui; Wu, Xiaoying; Zhang, Beibei; Liu, Jiahua; Ning, An; Wu, Zhongdao

    2017-11-01

    The prevalence and intensity of schistosomiasis has dropped dramatically in China due to an effective integrated control program. However, advanced schistosomiasis is becoming a key challenge on the road to elimination. The aims of this study were to compare the disease condition between advanced cases under the general assistance program (GAP) and free treatment program (FTP) and to determine whether the FTP should be popularized to provide an objective reference for policymakers in China's advanced schistosomiasis control program. One hundred and ninety-four patients with schistosomiasis japonica who were enrolled in the GAP or FTP participated in this study. Little significant difference was observed in the potential confounders, including general characteristics, comorbidities, and lifestyle, indicating a similar effect on the pathology of liver damage caused by schistosome infection. There was no apparent difference in the incidence of common clinical symptoms. Furthermore, no significant difference was observed in the ultrasound findings, implying that the GAP and FTP groups shared a similar degree of liver lesion. With the exception of the abnormal rates of aspartate aminotransferase (AST), alkaline phosphatase (ALP), and hyaluronic acid (HA), the other serological indicators were comparable between the groups. Overall, the FTP is not a better option for controlling advanced schistosomiasis in China. It is important to reveal the precise mechanism underlying the pathogenesis of advanced schistosomiasis so that specific approaches to treating and preventing the development of advanced schistosomiasis can be developed and schistosomiasis can be eliminated in China.

  17. Institutionalization and Sustainability of the National Science Foundation's Advanced Technological Education Program. CCRC Brief. Number 20

    Science.gov (United States)

    Bailey, Thomas R.; Matsuzuka, Yukari; Jacobs, James; Morest, Vanessa Smith; Hughes, Katherine L.

    2004-01-01

    In response to the 1992 Scientific and Advanced Technology Act (SATA), the National Science Foundation (NSF) initiated the Advanced Technological Education (ATE) program to promote systemic reform of the nation's science, technology, engineering, and mathematics (STEM) education. The Act gave community colleges the central role for the…

  18. An Assessment of Social Diffusion in the Respecting Choices Advance Care Planning Program

    OpenAIRE

    Moorman, Sara M.; Carr, Deborah; Kirchhoff, Karin T.; Hammes, Bernard J.

    2012-01-01

    This study examines the potential social diffusion effects of the Respecting Choices® advance care planning program, administered in La Crosse, Wisconsin since 1991. The program produces educational materials for patients, trains facilitators to help patients prepare for end-of-life, and ensures that advance directives are connected to patients' medical records. Using data from a survey of more than 5,000 white Wisconsin high school graduates in their mid-60s, we found that participants who w...

  19. Program for advanced study in public science policy and administration

    Science.gov (United States)

    Rosenthal, A. H.

    1976-01-01

    The results and conclusions of the six-year effort concerned with the development and implementation of a university educational program intended to prepare scientists and engineers for upper-level management and administrative positions (as distinct from senior technical positions) were presented. This interdisciplinary program is at the graduate level, leading to a Master of Arts degree, and is given within a Division of Public Administration.

  20. Advanced Pediatric Brain Imaging Research and Training Program

    Science.gov (United States)

    2013-10-01

    as an official Department of the Army position , policy or decision unless so designated by other documentation. REPORT DOCUMENTATION PAGE Form...Imaging biomarkers of outcome in the developing preterm brain. Lancet Neurol. 2009 Nov;8(11):1042-55. Epub 2009 Sep 30. 4. Mathur AM, Neil JJ, Inder...TE.Understanding brain injury and neurodevelopmental disabilities in the preterm infant: the evolving role of advanced magnetic resonance imaging.Semin

  1. Advanced coal-fired glass melting development program

    Energy Technology Data Exchange (ETDEWEB)

    1991-05-01

    The objective of Phase 1 of the current contract was to verify the technical feasibility and economic benefits of Vortec's advanced combustion/melting technology using coal as the fuel of choice. The objective of the Phase 2 effort was to improve the performance of the primary components and demonstrate the effective operation of a subscale process heater system integrated with a glass separator/reservoir. (VC)

  2. Overview of the US program of controls for advanced reactors

    Energy Technology Data Exchange (ETDEWEB)

    White, J.D.; Sackett, J.I.; Monson, R.; Lindsay, R.W.; Carroll, D.G.

    1989-01-01

    An automated control system can incorporate control goals and strategies, assessment of present and future plant status, diagnostic evaluation and maintenance planning, and signal and command validation. It has not been feasible to employ these capabilities in conventional hard-wired, analog, control systems. Recent advances in computer-based digital data acquisition systems, process controllers, fiber-optic signal transmission artificial intelligence tools and methods, and small inexpensive, fast, large-capacity computers---with both numeric and symbolic capabilities---have provided many of the necessary ingredients for developing large, practical automated control systems. Furthermore, recent reactor designs which provide strong passive responses to operational upsets or accidents afford good opportunities to apply these advances in control technology. This paper presents an overall US national perspective for advanced controls research and development. The goals of high reliability, low operating cost and simple operation are described. The staged approach from conceptualization through implementation is discussed. Then the paper describes the work being done by ORNL, ANL and GE. The relationship of this work to the US commercial industry is also discussed.

  3. Advanced on-site power plant development technology program

    Science.gov (United States)

    Kemp, F. S.

    1985-01-01

    A 30-cell stack was tested for 7200 hours. At 6000 hours the stack was successfully refilled with acid with no loss of performance. A second stack containing the advanced Configuration B cell package was fabricated and assembled for testing in 1985. A 200-kW brassboard inverter was successfully evaluated, verifying the design of the two-bridge ASCR circuit design. A fuel processing catalyst train was tested for 2000 hours verifying the catalyst for use in a 200-kW development reformer. The development reformer was fabricated for evaluation in 1985. The initial test plan was prepared for a 200-kW verification test article.

  4. Advanced on-site power plant development technology program

    Science.gov (United States)

    Kemp, F. S.

    1985-02-01

    A 30-cell stack was tested for 7200 hours. At 6000 hours the stack was successfully refilled with acid with no loss of performance. A second stack containing the advanced Configuration B cell package was fabricated and assembled for testing in 1985. A 200-kW brassboard inverter was successfully evaluated, verifying the design of the two-bridge ASCR circuit design. A fuel processing catalyst train was tested for 2000 hours verifying the catalyst for use in a 200-kW development reformer. The development reformer was fabricated for evaluation in 1985. The initial test plan was prepared for a 200-kW verification test article.

  5. Advanced Transmission Components Investigation Program. Bearing and Seal Development.

    Science.gov (United States)

    1980-08-01

    influc~les On l aigcaatrsis 13fo01C irrSta1latior aind test, hoLthl tire magnectic rliiig arid thle seal case/c~rorro insert were ultrasori~alfs ileined...Drag Load 609 ± 586 lb Rotor Hub Moment 262,000 in-lb These are the same as the Boeing Vertol YUH-61 A criteria. In the proposed advanced design...These loads, applied ,it the rotor hub mounting flange, are representative ot thrust arid overturning moment ultimate condition loads of tile YUH-61

  6. Advancing nano-satellite platforms : The Delfi Program

    NARCIS (Netherlands)

    Bouwmeester, J.; Gill, E.K.A.; Verhoeven, C.J.M.

    2008-01-01

    The Delfi Program aims to launch a nano-satellite every 2.5 years with the objectives to give the best education for space engineering, to test and qualify novel space technology and to enhance the nanosatellite platform to open doors for new applications. With Delfi-C3 in orbit, Delfi-n3Xt in

  7. NASA EEE Parts and Advanced Interconnect Program (AIP)

    Science.gov (United States)

    Gindorf, T.; Garrison, A.

    1996-01-01

    none given From Program Objectives: I. Accelerate the readiness of new technologies through development of validation, assessment and test method/tools II. Provide NASA Projects infusion paths for emerging technologies III. Provide NASA Projects technology selection, application and validation guidelines for harware and processes IV. Disseminate quality assurance, reliability, validation, tools and availability information to the NASA community.

  8. National Shipbuilding Research Program and Navy - Further Advancement Through Collaboration

    Science.gov (United States)

    2002-02-26

    resounding validation from the broad ASE was growing beyond just a research industry , and development program. The development time coupled with two years...than product focused. Therefore, a research industry is, and feels, accountable for the institution with R&D efforts aimed at the way the money is spent

  9. Advancing Teacher Education and Curriculum Development through Study Abroad Programs

    Science.gov (United States)

    Rhodes, Joan A., Ed.; Milby, Tammy M., Ed.

    2016-01-01

    The number of English language students in American schools has dramatically increased in recent years, creating a greater awareness of cross-cultural issues and considerations in education. Globalization as well as an increase in international exchange student programs has proven that pre-service teachers can benefit from traveling abroad and…

  10. Advanced Pediatric Brain Imaging Research and Training Program

    Science.gov (United States)

    2015-10-01

    the BRAIN program has significant training benefits for healthcare providers across multiple specialties and subspecialties. 2 BODY The focus of...with or without contrast agents and arterial spin labeling, along with clinical applications. Finally, module 15 walks learners through the concepts...behind and clinical application of magnetic resonance spectroscopy including how to interpret NMR Spectra (electron shielding, spin spin coupling

  11. NASA's Advanced Space Transportation Program: A Materials Overview

    Science.gov (United States)

    Clinton, R. G., Jr.

    1999-01-01

    The realization of low-cost assess to space is one of NASA's three principal goals or "pillars" under the Office of Aero-Space Technology. In accordance with the goals of this pillar, NASA's primary space transportation technology role is to develop and demonstrate next-generation technologies to enable the commercial launch industry to develop full-scale, low cost, highly reliable space launchers. The approach involves both ground-based technology demonstrations and flight demonstrators, including the X-33, X-34, Bantam, Reusable Launch Vehicle (RLV), and future experimental vehicles. Next generation space transportation vehicles and propulsion systems will require the development and implementation of advanced materials and processes. This presentation will provide an overview of advanced materials efforts which are focused on the needs of next generation space transportation systems. Applications described will include ceramic matrix composite (CMC) integrally bladed turbine disk (blisk); actively cooled CMC nozzle ramp for the aerospike engine; ablative thrust chamber/nozzle; and metal matrix composite turbomachinery housings.

  12. Program for the Advancement of Librarianship (ALP) in the Third World.

    Science.gov (United States)

    Johansson, Eve

    1992-01-01

    Describes activities of the Advancement of Librarianship Program (ALP) sponsored by IFLA (International Federation of Library Associations and Institutions). Topics discussed include study grants awarded to librarians from the third world to study in Europe; model training programs; promotion of library services to rural areas; and literacy…

  13. Computers-for-edu: An Advanced Business Application Programming (ABAP) Teaching Case

    Science.gov (United States)

    Boyle, Todd A.

    2007-01-01

    The "Computers-for-edu" case is designed to provide students with hands-on exposure to creating Advanced Business Application Programming (ABAP) reports and dialogue programs, as well as navigating various mySAP Enterprise Resource Planning (ERP) transactions needed by ABAP developers. The case requires students to apply a wide variety…

  14. Cost estimation model for advanced planetary programs, fourth edition

    Science.gov (United States)

    Spadoni, D. J.

    1983-01-01

    The development of the planetary program cost model is discussed. The Model was updated to incorporate cost data from the most recent US planetary flight projects and extensively revised to more accurately capture the information in the historical cost data base. This data base is comprised of the historical cost data for 13 unmanned lunar and planetary flight programs. The revision was made with a two fold objective: to increase the flexibility of the model in its ability to deal with the broad scope of scenarios under consideration for future missions, and to maintain and possibly improve upon the confidence in the model's capabilities with an expected accuracy of 20%. The Model development included a labor/cost proxy analysis, selection of the functional forms of the estimating relationships, and test statistics. An analysis of the Model is discussed and two sample applications of the cost model are presented.

  15. FFTF and Advanced Reactors Transition Program Resource Loaded Schedule

    Energy Technology Data Exchange (ETDEWEB)

    GANTT, D.A.

    2000-10-31

    This Resource Load Schedule (RLS) addresses two missions. The Advanced Reactors Transition (ART) mission, funded by DOE-EM, is to transition assigned, surplus facilities to a safe and compliant, low-cost, stable, deactivated condition (requiring minimal surveillance and maintenance) pending eventual reuse or D&D. Facilities to be transitioned include the 309 Building Plutonium Recycle Test Reactor (PRTR) and Nuclear Energy Legacy facilities. This mission is funded through the Environmental Management (EM) Project Baseline Summary (PBS) RL-TP11, ''Advanced Reactors Transition.'' The second mission, the Fast Flux Test Facility (FFTF) Project, is funded through budget requests submitted to the Office of Nuclear Energy, Science and Technology (DOE-NE). The FFTF Project mission is maintaining the FFTF, the Fuels and Materials Examination Facility (FMEF), and affiliated 400 Area buildings in a safe and compliant standby condition. This mission is to preserve the condition of the plant hardware, software, and personnel in a manner not to preclude a plant restart. This revision of the Resource Loaded Schedule (RLS) is based upon the technical scope in the latest revision of the following project and management plans: Fast Flux Test Facility Standby Plan (Reference 1); Hanford Site Sodium Management Plan (Reference 2); and 309 Building Transition Plan (Reference 4). The technical scope, cost, and schedule baseline is also in agreement with the concurrent revision to the ART Fiscal Year (FY) 2001 Multi-Year Work Plan (MYWP), which is available in an electronic version (only) on the Hanford Local Area Network, within the ''Hanford Data Integrator (HANDI)'' application.

  16. Advanced reactors transition fiscal year 1995 multi-year program plan WBS 7.3

    Energy Technology Data Exchange (ETDEWEB)

    Loika, E.F.

    1994-09-22

    This document describes in detail the work to be accomplished in FY-1995 and the out years for the Advanced Reactors Transition (WBS 7.3). This document describes specific milestones and funding profiles. Based upon the Fiscal Year 1995 Multi-Year Program Plan, DOE will provide authorization to perform the work outlined in the FY 1995 MYPP. Following direction given by the US Department of Energy (DOE) on December 15, 1993, Advanced Reactors Transition (ART), previously known as Advanced Reactors, will provide the planning and perform the necessary activities for placing the Fast Flux Test Facility (FFTF) in a radiologically and industrially safe shutdown condition. The DOE goal is to accomplish the shutdown in approximately five years. The Advanced Reactors Transition Multi-Year Program Plan, and the supporting documents; i.e., the FFTF Shutdown Program Plan and the FFTF Shutdown Project Resource Loaded Schedule (RLS), are defined for the life of the Program. During the transition period to achieve the Shutdown end-state, the facilities and systems will continue to be maintained in a safe and environmentally sound condition. Additionally, facilities that were associated with the Office of Nuclear Energy (NE) Programs, and are no longer required to support the Liquid Metal Reactor Program will be deactivated and transferred to an alternate sponsor or the Decontamination and Decommissioning (D and D) Program for final disposition, as appropriate.

  17. The acceptance of dental operating microscope among advance education specialty programs in endodontics in the middle east

    Directory of Open Access Journals (Sweden)

    Mansour Alrejaie

    2012-01-01

    Full Text Available Aim: To present the current situation of dental operating microscopy (DOM training in the available Advance Specialty Education Programs in Endodontics in Arab Middle-Eastern countries. Materials and Methods: A web-based survey was sent to the electronic mail address of Advance Specialty Education programs of 15 Arab and middle east countries. The questions were limited to those who have an advanced specialty education program in Endodontics at their University if they are using an operating microscope? Results: Out of 15 countries, only 4 countries have microscopic technology in their Advance Education Programs in Endodontics. Conclusion: Few Arab Middle-Eastern countries have DOM in their advance education programs in endodontics. The highest authority in advancing endodontic education in the Arab Middle-East should consider in the near future the importance of this technology as standard care in teaching advance endodontics. An advance workshops should be organized regularly to provide enough knowledge about this standard educational technology.

  18. Advances in the national inertial fusion program of China

    Directory of Open Access Journals (Sweden)

    He X.T.

    2013-11-01

    Full Text Available The planned inertial confinement fusion (ICF ignition in China in around 2020 is to be accomplished in three steps. The first is carrying out target physics experiments in the existing laser facilities SG-II, SG-IIIP and SG-IIU (operating in 2012 of output energy 3-24 kJ at 3ω. Results have been obtained for better understanding the implosion dynamics and radiation transport. Recent studies include efficiency of radiation generation, hydrodynamic instabilities, shock waves in cryogenic targets, opacity measurements using kJ lasers, etc. Hydrodynamic codes (the LARED series have been developed and experimentally verified with over 5000 shots, and are applied to investigating target physics and ignition target design. For fast ignition, a large number of experiments and numerical simulations have led to improved understanding relevant to target design, hot electron transport, collimation by the spontaneous magnetic fields in overdense plasmas, etc. In addition to the SG-II, SG-IIU and SG-IIIP, the SG-III laser facility with energy of 200–400 kJ at 3ω shall operate in 2014 and be used for advanced target physics research. In the last step, the 1.5 MJ SG-IV laser facility still under design will be used to investigate ignition and burning.

  19. Advanced control for inductive programming of MST plasmas

    Science.gov (United States)

    Goumiri, I. R.; McCollam, K. J.; Squitieri, A.; Holly, D. J.; Sarff, J. S.; Jacobson, C. M.

    2017-10-01

    MST is a reversed field pinch whose poloidal and toroidal magnetic fields (Bp and Bt) can be sourced by IGBT-based programmable power supplies. In order to provide real-time simultaneous control of both Bp and Bt circuits, a time-dependent integrated modeling code is developed. Relaxed-state RFP physics simulations provide prediction and interpretive analysis of MST experimental data. The actuators considered for the control are the Bp and Bt primary currents. However, the physical quantities which MST operators want to demand can vary for different experiments and can have complicated dependences on the two actuator quantities as well as time. To develop our advanced control system, we choose to focus on two demand quantities, the plasma current Ip, directly related to Bp, and the reversal parameter F, closely related to Bt. To understand the response of Ip and F to the actuators and to enable systematic design of control algorithms, a linearized dynamic response model is generated using a system identification method. A multi-variable model based control scheme that accounts for the coupled dynamics of the system while mitigating the effect of actuator limitations is designed. A series of experiments are planned to test our controllers and validate our modeling. This work is supported by the U.S DOE.

  20. Cooperative Research and Development for Advanced Microturbines Program on Advanced Integrated Microturbine System

    Energy Technology Data Exchange (ETDEWEB)

    Michael J. Bowman

    2007-05-30

    The Advanced Integrated Microturbine Systems (AIMS) project was kicked off in October of 2000 to develop the next generation microturbine system. The overall objective of the project was to develop a design for a 40% electrical efficiency microturbine system and demonstrate many of the enabling technologies. The project was initiated as a collaborative effort between several units of GE, Elliott Energy Systems, Turbo Genset, Oak Ridge National Lab and Kyocera. Since the inception of the project the partners have changed but the overall direction of the project has stayed consistent. The project began as a systems study to identify design options to achieve the ultimate goal of 40% electrical efficiency. Once the optimized analytical design was identified for the 40% system, it was determined that a 35% efficient machine would be capable of demonstrating many of the advanced technologies within the given budget and timeframe. The items that would not be experimentally demonstrated were fully produced ceramic parts. However, to understand the requirements of these ceramics, an effort was included in the project to experimentally evaluate candidate materials in representative conditions. The results from this effort would clearly identify the challenges and improvement required of these materials for the full design. Following the analytical effort, the project was dedicated to component development and testing. Each component and subsystem was designed with the overall system requirements in mind and each tested to the fullest extent possible prior to being integrated together. This method of component development and evaluation helps to minimize the technical risk of the project. Once all of the components were completed, they were assembled into the full system and experimentally evaluated.

  1. Advanced Industrial Materials (AIM) Program: Compilation of project summaries and significant accomplishments, FY 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven ``Vision Industries`` that use about 80% of industrial energy and generated about 90% of industrial wastes. The mission of AIM has, therefore, changed to ``Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`` Though AIM remains essentially a National Laboratory Program, it is essential that each project have industrial partners, including suppliers to, and customers of, the seven industries. Now, well into FY 1996, the transition is nearly complete and the AIM Program remains reasonably healthy and productive, thanks to the superb investigators and Laboratory Program Managers. This report contains the technical details of some very remarkable work by the best materials scientists and engineers in the world. Subject areas covered are: advanced metals and composites; advanced ceramics and composites; polymers and biobased materials; and new materials and processes.

  2. Light Water Reactor Sustainability Program Advanced Seismic Soil Structure Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Bolisetti, Chandrakanth [Idaho National Lab. (INL), Idaho Falls, ID (United States); Coleman, Justin Leigh [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-06-01

    of interest. The specific nonlinear soil behavior included in the NLSSI calculation presented in this report is gapping and sliding. Other NLSSI effects are not included in the calculation. The results presented in this report document initial model runs in the linear and nonlinear analysis process. Final comparisons between traditional and advanced SPRA will be presented in the September 30th deliverable.

  3. CE: Original Research: Creating an Evidence-Based Progression for Clinical Advancement Programs.

    Science.gov (United States)

    Burke, Kathleen G; Johnson, Tonya; Sites, Christine; Barnsteiner, Jane

    2017-05-01

    : Background: The Institute of Medicine (IOM) and the Quality and Safety Education for Nurses (QSEN) project have identified six nursing competencies and supported their integration into undergraduate and graduate nursing curricula nationwide. But integration of those competencies into clinical practice has been limited, and evidence for the progression of competency proficiency within clinical advancement programs is scant. Using an evidence-based approach and building on the competencies identified by the IOM and QSEN, a team of experts at an academic health system developed eight competency domains and 186 related knowledge, skills, and attitudes (KSAs) for professional nursing practice. The aim of our study was to validate the eight identified competencies and 186 related KSAs and determine their developmental progression within a clinical advancement program. Using the Delphi technique, nursing leadership validated the newly identified competency domains and KSAs as essential to practice. Clinical experts from 13 Magnet-designated hospitals with clinical advancement programs then participated in Delphi rounds aimed at reaching consensus on the developmental progression of the 186 KSAs through four levels of clinical advancement. Two Delphi rounds resulted in consensus by the expert participants. All eight competency domains were determined to be essential at all four levels of clinical practice. At the novice level of practice, the experts identified a greater number of KSAs in the domains of safety and patient- and family-centered care. At more advanced practice levels, the experts identified a greater number of KSAs in the domains of professionalism, teamwork, technology and informatics, and continuous quality improvement. Incorporating the eight competency domains and the 186 KSAs into a framework for clinical advancement programs will likely result in more clearly defined role expectations; enhance accountability; and elevate and promote nursing practice

  4. A survey study of sedation training in advanced pediatric dentistry programs: thoughts of program directors and students.

    Science.gov (United States)

    Wilson, Stephen; Nathan, John E

    2011-01-01

    The purpose of this study was to survey program directors and students of advanced pediatric dentistry training programs in the United States on sedation issues. Surveys were sent to the target audiences. Questions contained response categories ranging from fill-in-the-blank, Likert-order scale style, and categorical. The surveys resided on SurveyMonkey. A cover letter emphasizing such issues as anonymity of responses was sent via e-mail to participants using the American Academy of Pediatric Dentistry listserv. The responses were downloaded and subsequently analyzed using SPSS statistical software. Data were obtained from 49% of program directors and 17% of students. Experience with different routes of sedative administration varied from "none" (even with the oral route) to "significant." Oral midazolam was the most-often used route and sedative. Restraint was reportedly used by the majority of programs. Strategies should be developed to strengthen consistency of competencies in sedation practices across academic training programs.

  5. The role of pediatric dentistry in multidisciplinary cleft palate teams at advanced pediatric dental residency programs.

    Science.gov (United States)

    Jaju, Rishita; Tate, Anupama Rao

    2009-01-01

    The purpose of this study was to characterize the participation of pediatric dentistry in multidisciplinary cleft palate teams (CPTs) at advanced pediatric dental residency programs. A survey was sent to the directors of advanced pediatric dentistry programs across the United States. Of the 60 (90%) surveys returned, 18% of the programs were university-based, 40% hospital-based, and 42% combined programs. Overall, 92% of the programs reported pediatric dentistry's participation in CPTs. Orthodontics, plastic surgery, oral surgery, otolaryngology, and speech therapy, are represented on at least 75% of the CPTs. Nursing and psychology are represented in less than 50% of the CPTs. A higher percentage of combined programs reported providing interceptive orthodontics, while more hospital-based programs reported providing presurgical infant orthopedic appliances (PIOAs). Of the 47% of the programs that reported use of POIA, 64% reported using removable appliances. Seventy-five percent of the programs reported that there has been no change, 22% reported an increase, and 3% reported a decrease in the CPT participation level in the post 5 years. This study highlights the role of pediatric dentistry as a part of cleft palate team. This role extends from preventive and restorative to infant orthopedics.

  6. Earth Institute at Columbia University ADVANCE Program: Addressing Needs for Women in Earth and Environmental Sciences

    Science.gov (United States)

    Bell, R. E.; Cane, M.; Mutter, J.; Miller, R.; Pfirman, S.; Laird, J.

    2004-12-01

    The Earth Institute has received a major NSF ADVANCE grant targeted at increasing the participation and advancement of women scientists and engineers in the Academy through institutional transformation. The Earth Institute at Columbia University includes 9 research institutes including Lamont-Doherty Earth Observatory, Center for Environmental Research and Conservation (CERC), Center for International Earth Science Information Network (CIESIN), International Research Institute (IRI) for Climate Prediction, Earth Engineering Center, NASA-Goddard Institute for Space Studies, Center for Risks and Hazards, Center for Globalization and Sustainable Development, and Center for Global Health and Economic Development and six academic departments including Ecology, Evolution and Environmental Biology (E3B, School of Arts and Sciences), Earth and Environmental Engineering (DEEE, School of Engineering and Applied Sciences), Department of Environmental Health (School of Public Health), Department of Earth and Environmental Sciences (DEES, School of Arts and Sciences), Department of International and Public Affairs (School of International and Policy Affairs), and Barnard College Department of Environmental Science. The Earth Institute at Columbia University's ADVANCE program is based both on a study of the status of women at Columbia and research on the progression of women in science elsewhere. The five major targets of the Columbia ADVANCE program are to (1) change the demographics of the faculty through intelligent hiring practices, (2) provide support to women scientists through difficult life transitions including elder care and adoption or birth of a child, (3) enhance mentoring and networking opportunities, (4) implement transparent promotion procedures and policies, and (5) conduct an institutional self study. The Earth Institute ADVANCE program is unique in that it addresses issues that tend to manifest themselves in the earth and environmental fields, such as extended

  7. AICD -- Advanced Industrial Concepts Division Biological and Chemical Technologies Research Program. 1993 Annual summary report

    Energy Technology Data Exchange (ETDEWEB)

    Petersen, G.; Bair, K.; Ross, J. [eds.

    1994-03-01

    The annual summary report presents the fiscal year (FY) 1993 research activities and accomplishments for the United States Department of Energy (DOE) Biological and Chemical Technologies Research (BCTR) Program of the Advanced Industrial Concepts Division (AICD). This AICD program resides within the Office of Industrial Technologies (OIT) of the Office of Energy Efficiency and Renewable Energy (EE). The annual summary report for 1993 (ASR 93) contains the following: A program description (including BCTR program mission statement, historical background, relevance, goals and objectives), program structure and organization, selected technical and programmatic highlights for 1993, detailed descriptions of individual projects, a listing of program output, including a bibliography of published work, patents, and awards arising from work supported by BCTR.

  8. The effect of the Advanced Placement Training and Incentive Program on increasing enrollment and performance on Advanced Placement science exams

    Science.gov (United States)

    Ramsey, Susan Brady

    The purpose of this study is to examine the effectiveness of the National Math and Science Initiative's Advanced Placement Training and Incentive Program (APTIP) on the number of students taking AP science courses and their performance. The study evaluated 39 schools over a six-year period in six states that participate in the APTIP. The National Math and Science Initiative provided data for cohort I. A general linear model for repeated measures was used to evaluate the data. Data was evaluated three years prior to the intervention and three years during the intervention, which will actually continue for two more years (2012 and 2013) since cohort I schools were awarded five years of support. Students in APTIP schools enrolled in more AP science exams (AP Biology, AP Chemistry, AP Environmental Science, and AP Physics-B) over the course of the intervention. The quantity of students earning qualifying scores increased during the intervention years. APTIP is a multi-tiered program that includes seven days of teacher training, three six-hour student prep sessions, school equipment, reduced exam fees, and monetary incentives for students and teachers. This program positively impacted the quantity of enrollment and qualifying scores during the three years evaluated in this study. Increases in the number of female and African American students' test takers their and qualifying scores were seen in all three years of the APTIP intervention. This study supports the premise that the first step to increasing the Science, technology, engineering, and math (STEM) pipeline is giving access to advanced courses to more students in high schools.

  9. Continued advancement of the programming language HAL to an operational status

    Science.gov (United States)

    1971-01-01

    The continued advancement of the programming language HAL to operational status is reported. It is demonstrated that the compiler itself can be written in HAL. A HAL-in-HAL experiment proves conclusively that HAL can be used successfully as a compiler implementation tool.

  10. Foreign Language Writing Fellows Programs: A Model for Improving Advanced Writing Skills

    Science.gov (United States)

    Snyder, Delys Waite; Nielson, Rex P.; Kurzer, Kendon

    2016-01-01

    Within the growing field of scholarly literature on foreign language (FL) writing pedagogy, few studies have addressed pedagogical questions regarding the teaching of writing to advanced language learners. Writing fellows peer tutoring programs, although typically associated with first language writing instruction, likely can benefit and support…

  11. 75 FR 57145 - Federal-State Unemployment Compensation Program; Funding Goals for Interest-Free Advances

    Science.gov (United States)

    2010-09-17

    ... Labor Employment and Training Administration 20 CFR Part 606 Federal-State Unemployment Compensation... Administration 20 CFR Part 606 RIN 1205-AB53 Federal-State Unemployment Compensation Program; Funding Goals for... advances from the Federal Government for the payment of unemployment compensation (UC) upon the State...

  12. Career Advancement, Career Enhancement, and Personal Growth of Pepperdine University's Educational Leadership Academy Graduate Program Alumni

    Science.gov (United States)

    Nichols, Ruth I.

    2012-01-01

    The purpose of this phenomenological study was two-fold: (a) to explore and describe the perceived impact of Pepperdine University's Educational Leadership Academy (ELA) on 2003-2006 ELA graduates' career advancement, career enhancement, and personal growth; and (b) to obtain ELA graduates' suggestions for ELA program improvement to better prepare…

  13. The BRAINS Program: Transforming Career Development to Advance Diversity and Equity in Neuroscience.

    Science.gov (United States)

    Yen, Joyce W; Horner-Devine, M Claire; Margherio, Cara; Mizumori, Sheri J Y

    2017-05-03

    In order to better prepare trainees and advance diversity in neuroscience, career development must move beyond scientific skills. The BRAINS Program's continuous professional development model positively impacts participants' careers by fostering a sense of community and creating a counterspace for critical conversations. Copyright © 2017 Elsevier Inc. All rights reserved.

  14. Advanced General Dentistry Education Programs: Issues and Forces That Will Shape the Future.

    Science.gov (United States)

    VanOstenburg, Paul R.

    1983-01-01

    Issues in postdoctoral dental education and distinctions between the general practice residency and the advanced education program in general dentistry include: the need for practitioners and further specialization in the work force, society's health care needs, and changes in the health care industry, dental education, dental departments, and…

  15. National advanced drilling and excavation technologies program: Summary of third meeting of interested Federal agencies

    Energy Technology Data Exchange (ETDEWEB)

    None

    1993-12-07

    The purpose of the meeting was: (1) to discuss a proposal by the Massachusetts Institute of Technology (MIT) outlining a National Advanced Drilling and Excavation Technologies Program, (2) to brief participants on events since the last meeting, and (3) to hear about drilling research activities funded by the Department of Energy. The meeting agenda is included as Attachment B.

  16. Advanced reactors transition fiscal year 1996 multi-year program plan WBS 7.3

    Energy Technology Data Exchange (ETDEWEB)

    Hulvey, R.K.

    1995-09-21

    This document describes in detail the work to be accomplished in FY 1996 and the out years for the Advanced Reactors Transition (WBS 7.3. ). This document describes specific milestones and funding profiles. Based upon the Fiscal Year 1996 Multi-Year Program Plan (MYPP), DOE will provide authorization to perform the work outlined in the FY 1996 MYPP

  17. 77 FR 53199 - California State Motor Vehicle Pollution Control Standards; Advanced Clean Car Program; Request...

    Science.gov (United States)

    2012-08-31

    ... AGENCY California State Motor Vehicle Pollution Control Standards; Advanced Clean Car Program; Request... control of emissions from new motor vehicles or new motor vehicle engines subject to this part. No state... crankcase emission standards) for the control of emissions from new motor vehicles or new motor vehicle...

  18. Second/Foreign Language Program Preservation and Advancement: Literatures and Lessons for Teachers and Teacher Education

    Science.gov (United States)

    Crookes, Graham; Talmy, Steven

    2004-01-01

    In a period of declining state support for education, we argue S/FL teachers and teacher educators would do well to become oriented to language program preservation and advancement. We discuss three areas such an orientation could take, namely organizing, direct action, and fundraising, so that teachers and students can become more involved in…

  19. Intellectual Estuaries: Connecting Learning and Creativity in Programs of Advanced Academics

    Science.gov (United States)

    Beghetto, Ronald A.; Kaufman, James C.

    2009-01-01

    Academic learning and creativity should be overlapping goals that can be simultaneously pursued in programs of advanced academics. However, efforts aimed at nurturing creativity and academic learning sometimes are represented as two related but separate paths; this separation is unnecessary and can undermine the development of creative and…

  20. 78 FR 59701 - Medicare Program; Approval of Accrediting Organization for Suppliers of Advanced Diagnostic...

    Science.gov (United States)

    2013-09-27

    ... participating suppliers with which it has a financial relationship with or interest. (For further information... Organization for Suppliers of Advanced Diagnostic Imaging Supplier Accreditation Program AGENCY: Centers for...Site TM , a national accreditation organization to accredit suppliers seeking to furnish the technical...

  1. Advanced Diesel Engine Component Development Program, final report - tasks 4-14

    Energy Technology Data Exchange (ETDEWEB)

    Kaushal, T.S.; Weber, K.E.

    1994-11-01

    The Advanced Diesel Engine Component Development (ADECD) Program is a multi-year, multi-phase effort to develop and demonstrate the critical technology needed to advance the heavy-duty low heat rejection (LHR) engine concept for the long-haul, heavy-duty truck market. The ADECD Program has been partitioned into two phases. The first phase, Phase 1, was completed in 1986, resulting in definition of the Advanced Diesel Reference Engine (ADRE)III. The second phase, Phase 11/111, examines the feasibility of the ADRE concepts for application to the on-highway diesel engine. Phase 11/111 is currently underway. This project is sponsored by the U.S. Department of Energy, Office of Transportation Technologies. The work has been performed by the Detroit Diesel Corporation (DDC) under Contract DEN3-329 with the NASA Lewis Research Center, who provide project management and technical direction.

  2. Clinical skills assessment of procedural and advanced communication skills: performance expectations of residency program directors

    Directory of Open Access Journals (Sweden)

    Erik E. Langenau

    2012-07-01

    Full Text Available Background: High stakes medical licensing programs are planning to augment and adapt current examinations to be relevant for a two-decision point model for licensure: entry into supervised practice and entry into unsupervised practice. Therefore, identifying which skills should be assessed at each decision point is critical for informing examination development, and gathering input from residency program directors is important. Methods: Using data from previously developed surveys and expert panels, a web-delivered survey was distributed to 3,443 residency program directors. For each of the 28 procedural and 18 advanced communication skills, program directors were asked which clinical skills should be assessed, by whom, when, and how. Descriptive statistics were collected, and Intraclass Correlations (ICC were conducted to determine consistency across different specialties. Results: Among 347 respondents, program directors reported that all advanced communication and some procedural tasks are important to assess. The following procedures were considered ‘important’ or ‘extremely important’ to assess: sterile technique (93.8%, advanced cardiovascular life support (ACLS (91.1%, basic life support (BLS (90.0%, interpretation of electrocardiogram (89.4% and blood gas (88.7%. Program directors reported that most clinical skills should be assessed at the end of the first year of residency (or later and not before graduation from medical school. A minority were considered important to assess prior to the start of residency training: demonstration of respectfulness (64%, sterile technique (67.2%, BLS (68.9%, ACLS (65.9% and phlebotomy (63.5%. Discussion: Results from this study support that assessing procedural skills such as cardiac resuscitation, sterile technique, and phlebotomy would be amenable to assessment at the end of medical school, but most procedural and advanced communications skills would be amenable to assessment at the end of the

  3. Clinical skills assessment of procedural and advanced communication skills: performance expectations of residency program directors

    Science.gov (United States)

    Langenau, Erik E.; Zhang, Xiuyuan; Roberts, William L.; DeChamplain, Andre F.; Boulet, John R.

    2012-01-01

    Background High stakes medical licensing programs are planning to augment and adapt current examinations to be relevant for a two-decision point model for licensure: entry into supervised practice and entry into unsupervised practice. Therefore, identifying which skills should be assessed at each decision point is critical for informing examination development, and gathering input from residency program directors is important. Methods Using data from previously developed surveys and expert panels, a web-delivered survey was distributed to 3,443 residency program directors. For each of the 28 procedural and 18 advanced communication skills, program directors were asked which clinical skills should be assessed, by whom, when, and how. Descriptive statistics were collected, and Intraclass Correlations (ICC) were conducted to determine consistency across different specialties. Results Among 347 respondents, program directors reported that all advanced communication and some procedural tasks are important to assess. The following procedures were considered ‘important’ or ‘extremely important’ to assess: sterile technique (93.8%), advanced cardiovascular life support (ACLS) (91.1%), basic life support (BLS) (90.0%), interpretation of electrocardiogram (89.4%) and blood gas (88.7%). Program directors reported that most clinical skills should be assessed at the end of the first year of residency (or later) and not before graduation from medical school. A minority were considered important to assess prior to the start of residency training: demonstration of respectfulness (64%), sterile technique (67.2%), BLS (68.9%), ACLS (65.9%) and phlebotomy (63.5%). Discussion Results from this study support that assessing procedural skills such as cardiac resuscitation, sterile technique, and phlebotomy would be amenable to assessment at the end of medical school, but most procedural and advanced communications skills would be amenable to assessment at the end of the first

  4. Advanced Reactors Transition program fiscal year 1998 multi-year work plan

    Energy Technology Data Exchange (ETDEWEB)

    Gantt, D.A.

    1997-09-25

    The mission of the Advanced Reactors Transition program is two-fold. First, the program is to maintain the Fast Flux Test Facility (FFTF) and the Fuels and Materials Examination Facility (FMEF) in Standby to support a possible future role in the tritium production strategy. Secondly, the program is to continue deactivation activities which do not conflict with the Standby directive. On-going deactivation activities include the processing of non-usable, irradiated, FFTF components for storage or disposal; deactivation of Nuclear Energy legacy test facilities; and deactivation of the Plutonium Recycle Test Reactor (PRTR) facility, 309 Building.

  5. Recognizing and Managing Complexity: Teaching Advanced Programming Concepts and Techniques Using the Zebra Puzzle

    Directory of Open Access Journals (Sweden)

    Xihui "Paul" Zhang

    2015-06-01

    Full Text Available Teaching advanced programming can be a challenge, especially when the students are pursuing different majors with diverse analytical and problem-solving capabilities. The purpose of this paper is to explore the efficacy of using a particular problem as a vehicle for imparting a broad set of programming concepts and problem-solving techniques. We present a classic brain teaser that is used to communicate and demonstrate advanced software development concepts and techniques. Our results show that students with varied academic experiences and goals, assuming at least one procedural/structured programming pre-requisite, can benefit from and also be challenged by such an exercise. Although this problem has been used by others in the classroom, we believe that our use of this problem in imparting such a broad range of topics to a diverse student population is unique.

  6. Advanced Industrial Materials (AIM) program. Compilation of project summaries and significant accomplishments FY 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in Fiscal Year 1995 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven {open_quotes}Vision Industries{close_quotes} that use about 80% of industrial energy and generated about 90% of industrial wastes. These are: (1) Aluminum; (2) Chemical; (3) Forest Products; (4) Glass; (5) Metal Casting; (6) Refineries; and (7) Steel. This report is a compilation of project summaries and significant accomplishments on materials.

  7. 78 FR 65715 - Request for Comments on the Program Solicitation for the Advanced Technological Education Program...

    Science.gov (United States)

    2013-11-01

    ... that drive our nation's economy. The program involves partnerships between academic institutions and... learning, scientific literacy, and a globally competitive science and engineering workforce'' ( http://www... makers, academic researchers, evaluators, industry, professional societies, and other interested parties...

  8. The New Millennium Program: Validating Advanced Technologies for Future Space Missions

    Science.gov (United States)

    Minning, Charles P.; Luers, Philip

    1999-01-01

    This presentation reviews the activities of the New Millennium Program (NMP) in validating advanced technologies for space missions. The focus of these breakthrough technologies are to enable new capabilities to fulfill the science needs, while reducing costs of future missions. There is a broad spectrum of NMP partners, including government agencies, universities and private industry. The DS-1 was launched on October 24, 1998. Amongst the technologies validated by the NMP on DS-1 are: a Low Power Electronics Experiment, the Power Activation and Switching Module, Multi-Functional Structures. The first two of these technologies are operational and the data analysis is still ongoing. The third program is also operational, and its performance parameters have been verified. The second program, DS-2, was launched January 3 1999. It is expected to impact near Mars southern polar region on 3 December 1999. The technologies used on this mission awaiting validation are an advanced microcontroller, a power microelectronics unit, an evolved water experiment and soil thermal conductivity experiment, Lithium-Thionyl Chloride batteries, the flexible cable interconnect, aeroshell/entry system, and a compact telecom system. EO-1 on schedule for launch in December 1999 carries several technologies to be validated. Amongst these are: a Carbon-Carbon Radiator, an X-band Phased Array Antenna, a pulsed plasma thruster, a wideband advanced recorder processor, an atmospheric corrector, lightweight flexible solar arrays, Advanced Land Imager and the Hyperion instrument

  9. BioAdvance Patient Support Program Survey: Positive Perception of Intravenous Infusions of Infliximab.

    Science.gov (United States)

    Jones, Jennifer; Borgaonkar, Mark; Siffledeen, Jesse; O'Reilly, Ryan; Anger, Dana; Dajnowiec, Dorota; Williamson, Martin; Dyrda, Peter

    2017-02-01

    To understand the perception of intravenous infusions in patients receiving infliximab (Remicade) within the BioAdvance patient support program (PSP). Intravenous infusion of infliximab occurs at approximately 200 clinics across Canada and is managed via the BioAdvance PSP. Patients were invited to complete a 28-question survey on demographics, disease/treatment characteristics, health rating, lifestyle, employment, and perception of intravenous infusions and the BioAdvance program. Analyses were exploratory and descriptive; collected data were self-reported ordinal (Likert scale, unfavorable-to-favorable, 1-10). The Wilcoxon signed-rank test was used to assess statistical significance, and multinomial logistic regression identified predictors of a positive perception of intravenous infusions. 1,712 patients completed the survey. Most respondents had been treated with infliximab for >2 years (58%), had not been previously treated with a biologic (74%), and were receiving treatment for inflammatory bowel disease (76%). Sixty-two percent of patients were employed and most traveled for personal/work reasons (57%) and had a busy/active lifestyle (76%) while attending the BioAdvance clinics. Before treatment, participants rated their perceived favorability of intravenous infusions at 5/10 (median; interquartile range, 5-7); after multiple infusions, their rating increased significantly to 8 (7-9) (P<.001). Regression analysis identified four predictors of a positive infusion experience: French language, favorable ratings of health, accuracy of physician's description, and satisfaction with their BioAdvance coordinator. The vast majority of participants were likely to recommend the BioAdvance PSP. The survey results indicate that the majority of patients receiving infliximab have a positive infusion experience within the BioAdvance PSP.

  10. Advanced network programming principles and techniques : network application programming with Java

    CERN Document Server

    Ciubotaru, Bogdan

    2013-01-01

    Answering the need for an accessible overview of the field, this text/reference presents a manageable introduction to both the theoretical and practical aspects of computer networks and network programming. Clearly structured and easy to follow, the book describes cutting-edge developments in network architectures, communication protocols, and programming techniques and models, supported by code examples for hands-on practice with creating network-based applications. Features: presents detailed coverage of network architectures; gently introduces the reader to the basic ideas underpinning comp

  11. Implementation of a new advanced graduate education program in oral implantology.

    Science.gov (United States)

    Gallucci, German O; Weber, Hans Peter; Kalenderian, Elsbeth

    2012-10-01

    The academic program for the Harvard School of Dental Medicine's Advanced Graduate Program in Oral Implantology is based on scientific evidence applied to educational quality, translational research, patient care, and service. The objective of the program is to enable highly motivated individuals with proven scholarship and excellence in patient care to achieve academic leadership in the clinical and scientific fields of implant dentistry and tissue regeneration. A detailed curriculum describing the academic program, as well as a business plan (which included a management plan describing the organizational structure, financial implications, and market forces) and implementation and communication plans, were developed before moving forward. With careful academic and business planning, the result was a vibrant implant program, in which all placements and restorations of implants are coordinated with regard to practice management. The program is integrated into the existing clinical care model and has been financially self-sustaining from its inception. Six students have participated in the last two years. On average, each student performed seventy-nine procedures on twenty-nine patients, generating over $46,000 in production. The curriculum includes didactics, hands-on clinical learning, and research activities. Research is a critical component as well. The results demonstrate that the time taken to develop a detailed curriculum and business plan for a new academic program, which anticipated and resolved potential barriers to success, was instrumental in the successful implementation of an oral implantology residency program.

  12. Advanced general dentistry program directors' attitudes on physician involvement in pediatric oral health care.

    Science.gov (United States)

    Raybould, Ted P; Wrightson, A Stevens; Massey, Christi Sporl; Smith, Tim A; Skelton, Judith

    2009-01-01

    Childhood oral disease is a significant health problem, particularly for vulnerable populations. Since a major focus of General Dentistry Program directors is the management of vulnerable populations, we wanted to assess their attitudes regarding the inclusion of physicians in the prevention, assessment, and treatment of childhood oral disease. A survey was mailed to all General Practice Residency and Advanced Education in General Dentistry program directors (accessed through the ADA website) to gather data. Spearman's rho was used to determine correlation among variables due to nonnormal distributions. Overall, Advanced General Dentistry directors were supportive of physicians' involvement in basic aspects of oral health care for children, with the exception of applying fluoride varnish. The large majority of directors agreed with physicians' assessing children's oral health and counseling patients on the prevention of dental problems. Directors who treated larger numbers of children from vulnerable populations tended to strongly support physician assistance with early assessment and preventive counseling.

  13. Uranium Mill Tailings Remedial Action Project Safety Advancement Field Effort (SAFE) Program

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    In 1992, the Uranium Mill Tailings Remedial Action (UMTRA) Project experienced several health and safety related incidents at active remediation project sites. As a result, the U.S. Department of Energy (DOE) directed the Technical Assistance Contractor (TAC) to establish a program increasing the DOE`s overall presence at operational remediation sites to identify and minimize risks in operations to the fullest extent possible (Attachments A and B). In response, the TAC, in cooperation with the DOE and the Remedial Action Contractor (RAC), developed the Safety Advancement Field Effort (SAFE) Program.

  14. Proceedings of the Advanced Turbine Systems Annual Program Review meeting. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    Goal of the 8-year program is to develop cleaner, more efficient, and less expensive gas turbine systems for utility and industrial electric power generation, cogeneration, and mechanical drive units. The conference is held annually for energy executives, engineers, scientists, and other interested parties industry, academia, and Government. Advanced turbine systems topics discussed during five technical sessions included policy and strategic issues, program element overviews and technical reviews, related activities, university/industry consortium interactions, and supportive projects. Twenty-one papers presented during the technical sessions are contained in this volume; they are processed separately for the data base.

  15. HARP model rotor test at the DNW. [Hughes Advanced Rotor Program

    Science.gov (United States)

    Dawson, Seth; Jordan, David; Smith, Charles; Ekins, James; Silverthorn, Lou

    1989-01-01

    Data from a test of a dynamically scaled model of the Hughes Advanced Rotor Program (HARP) bearingless model main rotor and 369K tail rotor are reported. The history of the HARP program and its goals are reviewed, and the main and tail rotor models are described. The test facilities and instrumentation are described, and wind tunnel test data are presented on hover, forward flight performance, and blade-vortex interaction. Performance data, acoustic data, and dynamic data from near field/far field and shear layer studies are presented.

  16. Faculty development program models to advance teaching and learning within health science programs.

    Science.gov (United States)

    Lancaster, Jason W; Stein, Susan M; MacLean, Linda Garrelts; Van Amburgh, Jenny; Persky, Adam M

    2014-06-17

    Within health science programs there has been a call for more faculty development, particularly for teaching and learning. The primary objectives of this review were to describe the current landscape for faculty development programs for teaching and learning and make recommendations for the implementation of new faculty development programs. A thorough search of the pertinent health science databases was conducted, including the Education Resource Information Center (ERIC), MEDLINE, and EMBASE, and faculty development books and relevant information found were reviewed in order to provide recommendations for best practices. Faculty development for teaching and learning comes in a variety of forms, from individuals charged to initiate activities to committees and centers. Faculty development has been effective in improving faculty perceptions on the value of teaching, increasing motivation and enthusiasm for teaching, increasing knowledge and behaviors, and disseminating skills. Several models exist that can be implemented to support faculty teaching development. Institutions need to make informed decisions about which plan could be most successfully implemented in their college or school.

  17. Faculty Development Program Models to Advance Teaching and Learning Within Health Science Programs

    Science.gov (United States)

    Lancaster, Jason W.; Stein, Susan M.; MacLean, Linda Garrelts; Van Amburgh, Jenny

    2014-01-01

    Within health science programs there has been a call for more faculty development, particularly for teaching and learning. The primary objectives of this review were to describe the current landscape for faculty development programs for teaching and learning and make recommendations for the implementation of new faculty development programs. A thorough search of the pertinent health science databases was conducted, including the Education Resource Information Center (ERIC), MEDLINE, and EMBASE, and faculty development books and relevant information found were reviewed in order to provide recommendations for best practices. Faculty development for teaching and learning comes in a variety of forms, from individuals charged to initiate activities to committees and centers. Faculty development has been effective in improving faculty perceptions on the value of teaching, increasing motivation and enthusiasm for teaching, increasing knowledge and behaviors, and disseminating skills. Several models exist that can be implemented to support faculty teaching development. Institutions need to make informed decisions about which plan could be most successfully implemented in their college or school. PMID:24954939

  18. A structured strategy to combine education for advanced MIS training in surgical oncology training programs.

    Science.gov (United States)

    Brar, S S; Wright, F; Okrainec, A; Smith, A J

    2011-09-01

    Changing realities in surgery and surgical technique have heightened the need for agile adaptation in training programs. Current guidelines reflect the growing acceptance and adoption of the use of minimally invasive surgery (MIS) in oncology. North American general surgery residents are often not adequately skilled in advanced laparoscopic surgery skills at the completion of their residency. Presently, advanced laparoscopic surgery training during surgical oncology fellowship training occurs on an ad-hoc basis in many surgical oncology programs. We present a rational and template for a structured training in advanced minimally invasive surgical techniques during surgical oncology fellowship training. The structure of the program seeks to incorporate evidence-based strategies in MIS training from a comprehensive review of the literature, while maintaining essential elements of rigorous surgical oncology training. Fellows in this stream will train and certify in the Fundamentals of Laparoscopic Surgery (FLS) course. Fellows will participate in the didactic oncology seminar series continuously throughout the 27 months training period. Fellows will complete one full year of dedicated MIS training, followed by 15 months of surgical oncology training. Minimal standards for case volume will be expected for MIS cases and training will be tailored to meet the career goals of the fellows. We propose that a formalized MIS-Surgical Oncology Fellowship will allow trainees to benefit from an effective training curriculum and furthermore, that will allow for graduates to lead in a cancer surgery milieu increasingly focused on minimally invasive approaches. Copyright © 2011 Elsevier Ltd. All rights reserved.

  19. Knowledge translation: a Nurse Practitioner Clinical Ladder Advancement Program in a university-affiliated, integrated medical center.

    Science.gov (United States)

    Paplanus, Lisa M; Bartley-Daniele, Patricia; Mitra, Kathryn S

    2014-08-01

    A Nurse Practitioner Clinical Ladder (NPCL) Advancement Program was designed to recognize and reward advanced nursing practice and promote nurse practitioner (NP) retention at New York University Hospitals Center (NYUHC). Search of published and gray literature was conducted. Electronic databases included CINAHL, Medline, PubMed, Cochrane Library of Systematic Reviews, and the Joanna Briggs Institute. The NYUHC NPCL Advancement Program incorporated its current Staff Nurse Clinical Ladder, previous NP promotional program literature, and NP role competencies to support the Advanced Practice Nursing Clinical Ladder Program. The NPCL is supportive of professional development, performance evaluation, clinical practice excellence, job satisfaction, and NP retention. Program outgrowths include a progressive model of NP clinical practice, a formal NP mentoring program, NP leadership, and research opportunities. Organizational commitment to a structured NPCL Advancement Program is critical for NP professional development, evolving role responsibilities, and job satisfaction. The NPCL Advancement Program provides requisite structures and processes supportive of clinical excellence. The development of the NPCL has highlighted the need for structured NP orientation and mentorship, knowledge translation, and leadership programs to meet the professional needs of NPs in diverse clinical settings. ©2013 American Association of Nurse Practitioners.

  20. Advanced Turbine Systems (ATS) program conceptual design and product development. Quarterly progress report, December 1, 1995--February 29, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    This report describes the overall program status of the General Electric Advanced Gas Turbine Development program, and reports progress on three main task areas. The program is focused on two specific products: (1) a 70-MW class industrial gas turbine based on the GE90 core technology, utilizing a new air cooling methodology; and (2) a 200-MW class utility gas turbine based on an advanced GE heavy-duty machine, utilizing advanced cooling and enhancement in component efficiency. The emphasis for the industrial system is placed on cycle design and low emission combustion. For the utility system, the focus is on developing a technology base for advanced turbine cooling while achieving low emission combustion. The three tasks included in this progress report are on: conversion to a coal-fueled advanced turbine system, integrated program plan, and design and test of critical components. 13 figs., 1 tab.

  1. Maintaining a Twitter Feed to Advance an Internal Medicine Residency Program's Educational Mission.

    Science.gov (United States)

    Bergl, Paul A; Narang, Akhil; Arora, Vineet M

    2015-07-10

    Residency programs face many challenges in educating learners. The millennial generation's learning preferences also force us to reconsider how to reach physicians in training. Social media is emerging as a viable tool for advancing curricula in graduate medical education. The authors sought to understand how social media enhances a residency program's educational mission. While chief residents in the 2013-2014 academic year, two of the authors (PB, AN) maintained a Twitter feed for their academic internal medicine residency program. Participants included the chief residents and categorical internal medicine house staff. At the year's end, the authors surveyed residents about uses and attitudes toward this initiative. Residents generally found the chief residents' tweets informative, and most residents (42/61, 69%) agreed that Twitter enhanced their overall education in residency. Data from this single-site intervention corroborate that Twitter can strengthen a residency program's educational mission. The program's robust following on Twitter outside of the home program also suggests a need for wider adoption of social media in graduate medical education. Improved use of data analytics and dissemination of these practices to other programs would lend additional insight into social media's role in improving residents' educational experiences.

  2. The Evolution of Technology in the Deep Space Network: A History of the Advanced Systems Program

    Science.gov (United States)

    Layland, J. W.; Rauch, L. L.

    1994-01-01

    The Deep Space Network (DSN) of 1995 might be described as the evolutionary result of 45 years of deep space communication and navigation, together with the synergistic activities of radio science and radar and radio astronomy. But the evolution of the DSN did not just happen - it was carefully planned and created. The evolution of the DSN has been an ongoing engineering activity, and engineering is a process of problem solving under constraints, one of which is technology. In turn, technology is the knowledge base providing the capability and experience for practical application of various areas of science, when needed. The best engineering solutions result from optimization under the fewest constraints, and if technology needs are well anticipated (ready when needed), then the most effective engineering solution is possible. Throughout the history of the DSN it has been the goal and function of DSN advanced technology development (designated the DSN Advanced Systems Program from 1963 through 1994) to supply the technology needs of the DSN when needed, and thus to minimize this constraint on DSN engineering. Technology often takes considerable time to develop, and when that happens, it is important to have anticipated engineering needs; at times, this anticipation has been by as much as 15 years. Also, on a number of occasions, mission malfunctions or emergencies have resulted in unplanned needs for technology that has, in fact, been available from the reservoir of advanced technology provided by the DSN Advanced Systems Program. Sometimes, even DSN engineering personnel fail to realize that the organization of JPL permits an overlap of DSN advanced technology activities with subsequent engineering activities. This can result in the flow of advanced technology into DSN engineering in a natural and sometimes almost unnoticed way. In the following pages, we will explore some of the many contributions of the DSN Advanced Systems Program that were provided to DSN

  3. Advanced general dentistry program directors' attitudes and behaviors regarding pediatric dental training for residents.

    Science.gov (United States)

    Massey, Christi Sporl; Raybould, Ted P; Skelton, Judith; Wrightson, A Stevens; Smith, Tim A

    2008-03-01

    The oral health of children became a more prominent concern with the U.S. surgeon general's report on oral health in America in 2000. The purpose of our study was 1) to assess General Practice Residency (GPR) and Advanced Education in General Dentistry (AEGD) (here jointly referred to as advanced general dentistry [AGD] programs) directors' current behaviors with regard to pediatric training of residents and 2) to assess their attitudes about which components of pediatric oral health training should be included in AGD programs. A twenty-one item survey was mailed to all GPR and AEGD programs accessed through the American Dental Association website. Seventy percent of directors (N=187) completed and returned the survey. Responses indicated that AGD residents receive adequate clinical exposure to pediatric patients and provide much-needed services to uninsured, underinsured, and underserved people. Although clinical training in pediatric treatment was high, didactic hours focused on pediatric treatment did not seem commensurate with clinical activity. Program directors indicated strong attitudinal support for teaching residents many components of pediatric oral health care, although most directors have concerns over increasing didactic hours spent on pediatric oral health due to already crowded curricula. Approximately 88 percent of directors said that they would implement a pediatric oral health module in their curricula if they had access to one.

  4. Effects of Technological Advances in Surgical Education on Quantitative Outcomes From Residency Programs.

    Science.gov (United States)

    Dietl, Charles A; Russell, John C

    2016-01-01

    The purpose of this article is to review the literature on current technology for surgical education and to evaluate the effect of technological advances on the Accreditation Council of Graduate Medical Education (ACGME) Core Competencies, American Board of Surgery In-Training Examination (ABSITE) scores, and American Board of Surgery (ABS) certification. A literature search was obtained from MEDLINE via PubMed.gov, ScienceDirect.com, and Google Scholar on all peer-reviewed studies published since 2003 using the following search queries: technology for surgical education, simulation-based surgical training, simulation-based nontechnical skills (NTS) training, ACGME Core Competencies, ABSITE scores, and ABS pass rate. Our initial search list included the following: 648 on technology for surgical education, 413 on simulation-based surgical training, 51 on simulation-based NTS training, 78 on ABSITE scores, and 33 on ABS pass rate. Further, 42 articles on technological advances for surgical education met inclusion criteria based on their effect on ACGME Core Competencies, ABSITE scores, and ABS certification. Systematic review showed that 33 of 42 and 26 of 42 publications on technological advances for surgical education showed objective improvements regarding patient care and medical knowledge, respectively, whereas only 2 of 42 publications showed improved ABSITE scores, but none showed improved ABS pass rates. Improvements in the other ACGME core competencies were documented in 14 studies, 9 of which were on simulation-based NTS training. Most of the studies on technological advances for surgical education have shown a positive effect on patient care and medical knowledge. However, the effect of simulation-based surgical training and simulation-based NTS training on ABSITE scores and ABS certification has not been assessed. Studies on technological advances in surgical education and simulation-based NTS training showing quantitative evidence that surgery residency

  5. Advanced turbine systems program -- Conceptual design and product development. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-26

    This Final Technical Report presents the accomplishments on Phase 2 of the Advanced Turbine Systems (ATS). The ATS is an advanced, natural gas fired gas turbine system that will represent a major advance on currently available industrial gas turbines in the size range of 1--20 MW. This report covers a market-driven development. The Market Survey reported in Section 5 identified the customer`s performance needs. This market survey used analyses performed by Solar turbine Incorporated backed up by the analyses done by two consultants, Research Decision Consultants (RDC) and Onsite Energy Corporation (Onsite). This back-up was important because it is the belief of all parties that growth of the ATS will depend both on continued participation in Solar`s traditional oil and gas market but to a major extent on a new market. This new market is distributed electrical power generation. Difficult decisions have had to be made to meet the different demands of the two markets. Available resources, reasonable development schedules, avoidance of schedule or technology failures, probable acceptance by the marketplace, plus product cost, performance and environmental friendliness are a few of the complex factors influencing the selection of the Gas Fired Advanced Turbine System described in Section 3. Section 4 entitled ``Conversion to Coal`` was a task which addresses the possibility of a future interruption to an economic supply of natural gas. System definition and analysis is covered in Section 6. Two major objectives were met by this work. The first was identification of those critical technologies that can support overall attainment of the program goals. Separate technology or component programs were begun to identify and parameterize these technologies and are described in Section 7. The second objective was to prepare parametric analyses to assess performance sensitivity to operating variables and to select design approaches to meet the overall program goals.

  6. The Experiences of Advanced Placement and International Baccalaureate Diploma Program Participants: A Systematic Review of Qualitative Research

    Science.gov (United States)

    Park, Kelly; Caine, Vera; Wimmer, Randolph

    2014-01-01

    Enriched high school curricula like the Advanced Placement and International Baccalaureate Diploma programs are endorsed as "pathway programs" for postsecondary-bound students. Program participation is perceived to have benefits that appeal to a broad stakeholder group of universities, administrators, teachers, students, and parents. In…

  7. The NASA "PERS" Program: Solid Polymer Electrolyte Development for Advanced Lithium-Based Batteries

    Science.gov (United States)

    Baldwin, Richard S.; Bennett, William R.

    2007-01-01

    In fiscal year 2000, The National Aeronautics and Space Administration (NASA) and the Air Force Research Laboratory (AFRL) established a collaborative effort to support the development of polymer-based, lithium-based cell chemistries and battery technologies to address the next generation of aerospace applications and mission needs. The ultimate objective of this development program, which was referred to as the Polymer Energy Rechargeable System (PERS), was to establish a world-class technology capability and U.S. leadership in polymer-based battery technology for aerospace applications. Programmatically, the PERS initiative exploited both interagency collaborations to address common technology and engineering issues and the active participation of academia and private industry. The initial program phases focused on R&D activities to address the critical technical issues and challenges at the cell level. Out of a total of 38 proposals received in response to a NASA Research Announcement (NRA) solicitation, 18 proposals (13 contracts and 5 grants) were selected for initial award to address these technical challenges. Brief summaries of technical approaches, results and accomplishments of the PERS Program development efforts are presented. With Agency support provided through FY 2004, the PERS Program efforts were concluded in 2005, as internal reorganizations and funding cuts resulted in shifting programmatic priorities within NASA. Technically, the PERS Program participants explored, to various degrees over the lifetime of the formal program, a variety of conceptual approaches for developing and demonstrating performance of a viable advanced solid polymer electrolyte possessing the desired attributes, as well as several participants addressing all components of an integrated cell configuration. Programmatically, the NASA PERS Program was very successful, even though the very challenging technical goals for achieving a viable solid polymer electrolyte material or

  8. The Master's program in Advanced Optical Technologies: an interdisciplinary, international and individual approach

    Science.gov (United States)

    Großmann, Jürgen; Schmauss, Bernhard

    2017-08-01

    The Master's Program in Advanced Optical Technologies (MAOT) was established at the Friedrich-Alexander Universität Erlangen-Nürnberg in 2007 as part of the Elite Network of Bavaria (ENB), an initiative by the Bavarian State Government comprising about 40 elite Master's programs and doctoral programs. MAOT can be studied after a Bachelor in physics or an engineering subject. The Master's program realizes an innovative concept combining three core elements: (1) Interdisciplinarity: The program integrates courses and researchers from five engineering subjects and from physics. The degree of interdisciplinarity goes far beyond traditional programs. (2) Internationality: The program is taught entirely in English and special support is given to international students. (3). Individuality: The course curriculum was adapted at several points based on the experience in the initial years. The same is true for the way in which international students are supported and the type of support they need. The students are given an unusually high degree of freedom to develop an individual curriculum and to pursue research projects. Crucial experience and lessons learned are: (1) Lecturers and researchers have to be coordinated and the perspectives of the different disciplines have to be integrated within one program. Students must be guided in order to deal with the demands and challenges of the different disciplines. (2) International students need support with settling in Germany and with learning and working in a German cultural environment. They need support with administrative issues. Furthermore, they need to analyze and understand cultural differences and how they impact on the cooperation between lecturers and students and on the work in research groups. (3) Students must be helped to develop their own curriculum. They must learn how to combine their first-degree qualification with the specialized qualification which they gain after completing their Master's program. They

  9. Multicontroller: an object programming approach to introduce advanced control algorithms for the GCS large scale project

    CERN Document Server

    Cabaret, S; Coppier, H; Rachid, A; Barillère, R; CERN. Geneva. IT Department

    2007-01-01

    The GCS (Gas Control System) project team at CERN uses a Model Driven Approach with a Framework - UNICOS (UNified Industrial COntrol System) - based on PLC (Programming Language Controller) and SCADA (Supervisory Control And Data Acquisition) technologies. The first' UNICOS versions were able to provide a PID (Proportional Integrative Derivative) controller whereas the Gas Systems required more advanced control strategies. The MultiController is a new UNICOS object which provides the following advanced control algorithms: Smith Predictor, PFC (Predictive Function Control), RST* and GPC (Global Predictive Control). Its design is based on a monolithic entity with a global structure definition which is able to capture the desired set of parameters of any specific control algorithm supported by the object. The SCADA system -- PVSS - supervises the MultiController operation. The PVSS interface provides users with supervision faceplate, in particular it links any MultiController with recipes: the GCS experts are ab...

  10. Advanced turbine systems program conceptual design and product development. Annual report, August 1994--July 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This report summarizes the tasks completed under this project during the period from August 1, 1994 through July 31, 1994. The objective of the study is to provide the conceptual design and product development plan for an ultra high efficiency, environmentally superior and cost-competitive industrial gas turbine system to be commercialized by the year 2000. The tasks completed include a market study for the advanced turbine system; definition of an optimized recuperated gas turbine as the prime mover meeting the requirements of the market study and whose characteristics were, in turn, used for forecasting the total advanced turbine system (ATS) future demand; development of a program plan for bringing the ATS to a state of readiness for field test; and demonstration of the primary surface recuperator ability to provide the high thermal effectiveness and low pressure loss required to support the proposed ATS cycle.

  11. The Advanced Industrial Materials (AIM) program office of industrial technologies fiscal year 1995

    Energy Technology Data Exchange (ETDEWEB)

    Sorrell, C.A.

    1997-04-01

    In many ways, the Advanced Industrial Materials (AIM) Program underwent a major transformation in FY95 and these changes have continued to the present. When the Program was established in 1990 as the Advanced Industrial Concepts (AIC) Materials Program, the mission was to conduct applied research and development to bring materials and processing technologies from the knowledge derived from basic research to the maturity required for the end use sectors for commercialization. In 1995, the Office of Industrial Technologies (OIT) made radical changes in structure and procedures. All technology development was directed toward the seven `Vision Industries` that use about 80% of industrial energy and generated about 90% of industrial wastes. These are: aluminium; chemical; forest products; glass; metal casting; refineries; and steel. OIT is working with these industries, through appropriate organizations, to develop Visions of the desired condition of each industry some 20 to 25 years in the future and then to prepare Road Maps and Implementation Plans to enable them to reach their goals. The mission of AIM has, therefore, changed to `Support development and commercialization of new or improved materials to improve productivity, product quality, and energy efficiency in the major process industries.`

  12. Preparing Students for Advanced Placement: An Evaluation of the Academic Contributions of Enrollment in Pre-AP Middle School Programs

    Science.gov (United States)

    Benvenuto, Charles M.

    2017-01-01

    Over the past 20 years, the College Board has expanded its Advanced Placement program to consist of over 30 courses offered to millions of students throughout the United States. While more students are enrolling in AP courses, the percentage of students passing the exams has declined. With students enrolling in the Advanced Placement courses as…

  13. Optimization of programming parameters in children with the advanced bionics cochlear implant.

    Science.gov (United States)

    Baudhuin, Jacquelyn; Cadieux, Jamie; Firszt, Jill B; Reeder, Ruth M; Maxson, Jerrica L

    2012-05-01

    Cochlear implants provide access to soft intensity sounds and therefore improved audibility for children with severe-to-profound hearing loss. Speech processor programming parameters, such as threshold (or T-level), input dynamic range (IDR), and microphone sensitivity, contribute to the recipient's program and influence audibility. When soundfield thresholds obtained through the speech processor are elevated, programming parameters can be modified to improve soft sound detection. Adult recipients show improved detection for low-level sounds when T-levels are set at raised levels and show better speech understanding in quiet when wider IDRs are used. Little is known about the effects of parameter settings on detection and speech recognition in children using today's cochlear implant technology. The overall study aim was to assess optimal T-level, IDR, and sensitivity settings in pediatric recipients of the Advanced Bionics cochlear implant. Two experiments were conducted. Experiment 1 examined the effects of two T-level settings on soundfield thresholds and detection of the Ling 6 sounds. One program set T-levels at 10% of most comfortable levels (M-levels) and another at 10 current units (CUs) below the level judged as "soft." Experiment 2 examined the effects of IDR and sensitivity settings on speech recognition in quiet and noise. Participants were 11 children 7-17 yr of age (mean 11.3) implanted with the Advanced Bionics High Resolution 90K or CII cochlear implant system who had speech recognition scores of 20% or greater on a monosyllabic word test. Two T-level programs were compared for detection of the Ling sounds and frequency modulated (FM) tones. Differing IDR/sensitivity programs (50/0, 50/10, 70/0, 70/10) were compared using Ling and FM tone detection thresholds, CNC (consonant-vowel nucleus-consonant) words at 50 dB SPL, and Hearing in Noise Test for Children (HINT-C) sentences at 65 dB SPL in the presence of four-talker babble (+8 signal

  14. The Evolution of Technology in the Deep Space Network: A History of the Advanced Systems Program

    Science.gov (United States)

    Layland, J. W.; Rauch, L. L.

    1997-04-01

    This article presents a survey of the principal efforts of the DSN Advanced Systems Program and its impact upon the operational Deep Space Network from about 1960 to 1995. The article is structured along two main themes. First is a tour of the fundamental services provided by the Network and the physical elements and technologies that support these services. The second theme is presented as a series of focused case histories of changes inspired by specific missions, such as Galileo, Voyager, or Mariner{Venus{Mercury, or by specific technologies, such as the application of fiber optics. A bibliographic entree to a substantial body of other reading material also is provided.

  15. TRAC-PF1: an advanced best-estimate computer program for pressurized water reactor analysis

    Energy Technology Data Exchange (ETDEWEB)

    Liles, D.R.; Mahaffy, J.H.

    1984-02-01

    The Transient Reactor Analysis Code (TRAC) is being developed at the Los Alamos National Laboratory to provide advanced best-estimate predictions of postulated accidents in light water reactors. The TRAC-PF1 program provides this capability for pressurized water reactors and for many thermal-hydraulic experimental facilities. The code features either a one-dimensional or a three-dimensional treatment of the pressure vessel and its associated internals; a two-phase, two-fluid nonequilibrium hydrodynamics model with a noncondensable gas field; flow-regime-dependent constitutive equation treatment; optional reflood tracking capability for both bottom flood and falling-film quench fronts; and consistent treatment of entire accident sequences including the generation of consistent initial conditions. This report describes the thermal-hydraulic models and the numerical solution methods used in the code. Detailed programming and user information also are provided.

  16. System engineering of aerospace and advanced technology programs at an astronautics company (record of study)

    Science.gov (United States)

    Kennedy, Mike O.

    An internship with the Martin Marietta Astronautics Group that was performed in partial fulfillment of the requirements for the Doctor of Engineering degree is documented. The internship included assignments with two Martin Marietta companies, on three different programs and in four areas of engineering. A first-hand look is taken at system engineering, SDI and advanced program management, and the way Martin Marietta conducts business. The five internship objectives were related to assignments in system modeling, system integration, engineering analysis and technical management: (1) The effects of thermally and mechanically induced mirror surface distortions upon the wavefront intensity field of a high energy laser beam passing through the optical train of a space-based laser system were modeled. (2) The restrictive as opposed to the broad interpretation of the 1972 ABM Treaty, and the capability of the Strategic Defense Initiative Zenith Star Program to comply with the Treaty were evaluated. (3) The capability of Martin Marietta to develop an automated analysis system to integrate and analyze Superconducting Super Collider detector designs was investigated. (4) The thermal models that were developed in support of the Small Intercontinental Ballistic Missile flight tests were described. (5) The technical management role of the Product Integrity Engineer assigned to the Zenith Star spacecraft's Beam Control and Transfer Subsystem was discussed. The relationships between the engineering, business, security and social concerns associated with the practice of engineering and the management of programs by a major defense contractor are explored.

  17. Advanced practice registered nurse usability testing of a tailored computer-mediated health communication program.

    Science.gov (United States)

    Lin, Carolyn A; Neafsey, Patricia J; Anderson, Elizabeth

    2010-01-01

    This study tested the usability of a touch-screen-enabled Personal Education Program with advanced practice RNs. The Personal Education Program is designed to enhance medication adherence and reduce adverse self-medication behaviors in older adults with hypertension. An iterative research process was used, which involved the use of (1) pretrial focus groups to guide the design of system information architecture, (2) two different cycles of think-aloud trials to test the software interface, and (3) post-trial focus groups to gather feedback on the think-aloud studies. Results from this iterative usability-testing process were used to systematically modify and improve the three Personal Education Program prototype versions-the pilot, prototype 1, and prototype 2. Findings contrasting the two separate think-aloud trials showed that APRN users rated the Personal Education Program system usability, system information, and system-use satisfaction at a moderately high level between trials. In addition, errors using the interface were reduced by 76%, and the interface time was reduced by 18.5% between the two trials. The usability-testing processes used in this study ensured an interface design adapted to APRNs' needs and preferences to allow them to effectively use the computer-mediated health-communication technology in a clinical setting.

  18. Effectiveness of Selected Advanced Placement Programs on the Academic Performance and College Readiness of High School Students

    Science.gov (United States)

    Lewis, Traschell S.

    2012-01-01

    The purpose of this study was to examine the effectiveness of selected Advanced Placement (AP) programs on the academic performance and college readiness of high school students. Specifically, the researcher was concerned with ascertaining the effectiveness of social science, math, science, English, music/art and language AP programs on the…

  19. M-DCPS Student Performance in International Baccalaureate and Cambridge Advanced International Certificate of Education Programs. Research Brief. Volume 1102

    Science.gov (United States)

    Blazer, Christie

    2011-01-01

    This Research Brief summarizes the performance of M-DCPS students participating in the International Baccalaureate (IB) and Cambridge Advanced International Certificate of Education (AICE) programs. Outcome data are provided for the eight M-DCPS schools offering the two programs and corresponding examinations. Participation in international…

  20. The DOE Advanced Gas Reactor (AGR) Fuel Development and Qualification Program

    Energy Technology Data Exchange (ETDEWEB)

    David Petti; Hans Gougar; Gary Bell

    2005-05-01

    The Department of Energy has established the Advanced Gas Reactor Fuel Development and Qualification Program to address the following overall goals: Provide a baseline fuel qualification data set in support of the licensing and operation of the Next Generation Nuclear Plant (NGNP). Gas-reactor fuel performance demonstration and qualification comprise the longest duration research and development (R&D) task for the NGNP feasibility. The baseline fuel form is to be demonstrated and qualified for a peak fuel centerline temperature of 1250°C. Support near-term deployment of an NGNP by reducing market entry risks posed by technical uncertainties associated with fuel production and qualification. Utilize international collaboration mechanisms to extend the value of DOE resources. The Advanced Gas Reactor Fuel Development and Qualification Program consists of five elements: fuel manufacture, fuel and materials irradiations, postirradiation examination (PIE) and safety testing, fuel performance modeling, and fission product transport and source term evaluation. An underlying theme for the fuel development work is the need to develop a more complete fundamental understanding of the relationship between the fuel fabrication process, key fuel properties, the irradiation performance of the fuel, and the release and transport of fission products in the NGNP primary coolant system. Fuel performance modeling and analysis of the fission product behavior in the primary circuit are important aspects of this work. The performance models are considered essential for several reasons, including guidance for the plant designer in establishing the core design and operating limits, and demonstration to the licensing authority that the applicant has a thorough understanding of the in-service behavior of the fuel system. The fission product behavior task will also provide primary source term data needed for licensing. An overview of the program and recent progress will be presented.

  1. Current status of core and advanced adult gastrointestinal endoscopy training in Canada: Survey of existing accredited programs.

    Science.gov (United States)

    Xiong, Xin; Barkun, Alan N; Waschke, Kevin; Martel, Myriam

    2013-01-01

    To determine the current status of core and advanced adult gastroenterology training in Canada. A survey consisting of 20 questions pertaining to core and advanced endoscopy training was circulated to 14 accredited adult gastroenterology residency program directors. For continuous variables, median and range were analyzed; for categorical variables, percentage and associated 95% CIs were analyzed. All 14 programs responded to the survey. The median number of core trainees was six (range four to 16). The median (range) procedural volumes for gastroscopy, colonoscopy, percutaneous endoscopic gastrostomy and sigmoidoscopy, respectively, were 400 (150 to 1000), 325 (200 to 1500), 15 (zero to 250) and 60 (25 to 300). Eleven of 13 (84.6%) programs used endoscopy simulators in their curriculum. Eight of 14 programs (57%) provided a structured advanced endoscopy training fellowship. The majority (88%) offered training of combined endoscopic retrograde cholangiopancreatography (ERCP) and endoscopic ultrasonography. The median number of positions offered yearly for advanced endoscopy fellowship was one (range one to three). The median (range) procedural volumes for ERCP, endoscopic ultrasonography and endoscopic mucosal resection, respectively, were 325 (200 to 750), 250 (80 to 400) and 20 (10 to 63). None of the current programs offered training in endoscopic submucosal dissection or natural orifice transluminal endoscopic surgery. Most accredited adult Canadian gastroenterology programs met the minimal procedural requirements recommended by the Canadian Association of Gastroenterology during core training. However, a more heterogeneous experience has been observed for advanced training. Additional studies would be required to validate and standardize evaluation tools used during gastroenterology curricula.

  2. Advanced Industrial Materials (AIM) Program: Compilation of project summaries and significant accomplishments, FY 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    The mission of the Advanced Industrial Materials (AIM) Program is to support development and commercialization of new or improved materials to improve energy efficiency, productivity, product quality, and reduced waste in the major process industries. A fundamentally new way of working with industries--the Industries of the Future (IOF) strategy--concentrates on the major process industries that consume about 90% of the energy and generate about 90% of the waste in the industrial sector. These are the aluminum, chemical, forest products, glass, metalcasting, and steel industries. OIT has encouraged and assisted these industries in developing visions of what they will be like 20 or 30 years into the future, defining the drivers, technology needs, and barriers to realization of their visions. These visions provide a framework for development of technology roadmaps and implementation plans. The AIM Program supports IOF by conducting research and development on materials to solve problems identified in the roadmaps. This is done by National Laboratory/industry/university teams with the facilities and expertise needed to develop new and improved materials. Each project in the AIM Program has active industrial participation and support. Assessments of materials needs and opportunities in the process industries are an on-going effort within the program. These assessments are being used for program planning and priority setting, followed by support of work to satisfy those needs. All the industries have identified materials as critical, particularly for high-temperature strength, corrosion resistance, and wear resistance. Also important from the energy efficiency viewpoint are membranes, catalytic membranes, and reactors for separations, both for processing and waste reduction. AIM focuses, therefore, on high-temperature materials, corrosion resistant materials, wear resistant materials, strong polymers, coatings, and membrane materials for industrial applications.

  3. The Impacts of Theme-Based Language Instruction: A Case Study of an Advanced Chinese Intensive Program

    OpenAIRE

    Song Jiang

    2017-01-01

    Theme-based language teaching under Content-Based Instruction (CBI) is a pedagogical approach that emphasizes learning professional content along with language skills. This paper reports a case study on the impacts of a theme-based advanced Chinese intensive program in a university setting. It begins with a review of CBI and its theme-based approach and then discusses the program design, curriculum development, and instructional practice of the program. The impacts of the theme-based approach...

  4. A computer program for estimating the power-density spectrum of advanced continuous simulation language generated time histories

    Science.gov (United States)

    Dunn, H. J.

    1981-01-01

    A computer program for performing frequency analysis of time history data is presented. The program uses circular convolution and the fast Fourier transform to calculate power density spectrum (PDS) of time history data. The program interfaces with the advanced continuous simulation language (ACSL) so that a frequency analysis may be performed on ACSL generated simulation variables. An example of the calculation of the PDS of a Van de Pol oscillator is presented.

  5. SCAI expert consensus statement for advanced training programs in pediatric and congenital interventional cardiac catheterization.

    Science.gov (United States)

    Armsby, Laurie; Beekman, Robert H; Benson, Lee; Fagan, Thomas; Hagler, Donald J; Hijazi, Ziyad M; Holzer, Ralf; Ing, Frank; Kreutzer, Jacqueline; Lang, Peter; Levi, Daniel S; Latson, Larry; Moore, Phillip; Mullins, Charles; Ruiz, Carlos; Vincent, Robert

    2014-11-01

    Pediatric and Congenital Interventional Cardiology is the practice of catheter-based techniques that improve cardiac physiology and circulation through the treatment of heart disease in children and adults with congenital or acquired heart defects. Over the last decade, and since last published training guidelines for pediatric cardiac catheterization and interventional cardiology were published in 2005 [1] the field of Pediatric and Congenital Cardiac Catheterization has evolved into a predominantly interventional discipline. As there is no sub-specialty certification for interventional cardiac catheterization in pediatrics, the Congenital Heart Disease Committee of the Society of Cardiovascular Angiography and Interventions has put together this consensus statement for advanced training in pediatric and congenital interventional cardiac catheterization. The statement puts forth recommendations for program infrastructure in terms of teaching, personnel, equipment, facilities, conferences, patient volume and trainee assessment. This is meant to set a standard for training programs as well as giving applicants a basis on which to judge and compare programs. © 2014 Wiley Periodicals, Inc.

  6. Review of the algal biology program within the National Alliance for Advanced Biofuels and Bioproducts

    Energy Technology Data Exchange (ETDEWEB)

    Unkefer, Clifford J.; Sayre, Richard T.; Magnuson, Jon K.; Anderson, Daniel B.; Baxter, Ivan; Blaby, Ian K.; Brown, Judith K.; Carleton, Michael; Cattolico, Rose Ann; Dale, Taraka; Devarenne, Timothy P.; Downes, C. Meghan; Dutcher, Susan K.; Fox, David T.; Goodenough, Ursula; Jaworski, Jan; Holladay, Jonathan E.; Kramer, David M.; Koppisch, Andrew T.; Lipton, Mary S.; Marrone, Babetta L.; McCormick, Margaret; Molnár, István; Mott, John B.; Ogden, Kimberly L.; Panisko, Ellen A.; Pellegrini, Matteo; Polle, Juergen; Richardson, James W.; Sabarsky, Martin; Starkenburg, Shawn R.; Stormo, Gary D.; Teshima, Munehiro; Twary, Scott N.; Unkefer, Pat J.; Yuan, Joshua S.; Olivares, José A.

    2017-03-01

    In 2010,when the National Alliance for Advanced Biofuels and Bioproducts (NAABB) consortiumbegan, littlewas known about themolecular basis of algal biomass or oil production. Very fewalgal genome sequenceswere available and efforts to identify the best-producing wild species through bioprospecting approaches had largely stalled after the U.S. Department of Energy's Aquatic Species Program. This lack of knowledge included how reduced carbon was partitioned into storage products like triglycerides or starch and the role played bymetabolite remodeling in the accumulation of energy-dense storage products. Furthermore, genetic transformation and metabolic engineering approaches to improve algal biomass and oil yields were in their infancy. Genome sequencing and transcriptional profiling were becoming less expensive, however; and the tools to annotate gene expression profiles under various growth and engineered conditions were just starting to be developed for algae. It was in this context that an integrated algal biology program was introduced in the NAABB to address the greatest constraints limiting algal biomass yield. This review describes the NAABB algal biology program, including hypotheses, research objectives, and strategies to move algal biology research into the twenty-first century and to realize the greatest potential of algae biomass systems to produce biofuels.

  7. Technology Reinvestment Program/Advanced ``Zero Emission'' Control Valve (Phase II)

    Energy Technology Data Exchange (ETDEWEB)

    J. Napoleon

    1998-12-01

    The objectives of this effort are to determine, develop and demonstrate the feasibility of significantly reducing the cost and expanding the applications for a family of Advanced Zero Emissions Control Valves that meets the fugitive emissions requirements of the 1990 Amendments to the Clean Air Act. This program is a direct technology spin-off from the valve technology that is critical to the US Navy's Nuclear Powered Fleet. These zero emissions valves will allow the Hydrocarbon and Chemical Processing Industries, etc., to maintain their competitiveness and still meet environmental and safety requirements. Phase 2 is directed at refining the basic technologies developed during Phase 1 so that they can be more readily selected and utilized by the target market. In addition to various necessary certifications, the project will develop a full featured digital controller with ``smart valve'' growth capability, expanding valve sizes/applications and identifying valve materials to permit applications in severe operational environments.

  8. Preparedness of Entering Pediatric Dentistry Residents: Advanced Pediatric Program Directors' and First-Year Residents' Perspectives.

    Science.gov (United States)

    Rutkauskas, John; Seale, N Sue; Casamassimo, Paul; Rutkauskas, John S

    2015-11-01

    For children to receive needed oral health care, adequate training at both the predoctoral and postdoctoral levels of dental education is required, but previous studies have found inadequacies in predoctoral education that lead to general dentists' unwillingness to treat certain young populations. As another way of assessing predoctoral preparation, the aim of this study was to determine the perspectives of first-year residents and pediatric program directors about residents' preparedness to enter advanced education programs in pediatric dentistry. Surveys were sent to all 74 U.S. program directors and 360 first-year residents. The survey focused on procedures related to prevention, behavior management, restorative procedures, pulp therapy, sedation, and surgery, as well as treating patients funded by Medicaid and with special health care needs. Among the first-year residents, 173 surveys were returned for a 48% response rate; 61 directors returned surveys for an 82% response rate. Only half of the residents (55%) reported feeling adequately prepared for their first year in residency; less than half cited adequate preparation to place stainless steel crowns (SSCs) (42%) and perform pulpotomies (45%). Far fewer felt adequately prepared to provide treatment for children six months to three years of age, including examinations (29%), infant oral exams (27%), and children with severe caries (37%). The program directors were even less positive about the adequacy of residents' preparation. Only 17% deemed them adequately prepared to place SSCs and 13% to perform pulpotomies. Approximately half reported their first-year residents were inadequately prepared to treat very young children and children with severe caries (55% each). This study found that the perceived inadequacy of predoctoral education in pediatric dentistry was consistent at both the learner and educator levels, supporting previous studies identifying inadequacies in this area.

  9. System Engineering of Aerospace and Advanced Technology Programs at AN Astronautics Company

    Science.gov (United States)

    Kennedy, Mike O.

    The purpose of this Record of Study is to document an internship with the Martin Marietta Astronautics Group in Denver, Colorado that was performed in partial fulfillment of the requirements for the Doctor of Engineering degree at Texas A&M University, and to demonstrate that the internship objectives have been met. The internship included assignments with two Martin Marietta companies, on three different programs and in four areas of engineering. The Record of Study takes a first-hand look at system engineering, SDI and advanced program management, and the way Martin Marietta conducts business. The five internship objectives were related to assignments in system modeling, system integration, engineering analysis and technical management. In support of the first objective, the effects of thermally and mechanically induced mirror surface distortions upon the wavefront intensity field of a high energy laser beam passing through the optical train of a space-based laser system were modeled. To satisfy the second objective, the restrictive as opposed to the broad interpretation of the 1972 ABM Treaty, and the capability of the Strategic Defense Initiative Zenith Star Program to comply with the Treaty were evaluated. For the third objective, the capability of Martin Marietta to develop an automated analysis system to integrate and analyze Superconducting Super Collider detector designs was investigated. For the fourth objective, the thermal models that were developed in support of the Small Intercontinental Ballistic Missile flight tests were described. And in response to the fifth objective, the technical management role of the Product Integrity Engineer assigned to the Zenith Star spacecraft's Beam Control and Transfer Subsystem was discussed. This Record of Study explores the relationships between the engineering, business, security and social concerns associated with the practice of engineering and the management of programs by a major defense contractor.

  10. Advancing geriatrics education: an efficient faculty development program for academic hospitalists increases geriatric teaching.

    Science.gov (United States)

    Mazotti, Lindsay; Moylan, Adam; Murphy, Elizabeth; Harper, G Michael; Johnston, C Bree; Hauer, Karen E

    2010-01-01

    Hospitalists care for an increasing number of older patients. As teachers, they are uniquely positioned to teach geriatric skills to residents. Faculty development programs focused on geriatrics teaching skills are often expensive and time-intensive, and may not enhance trainee learning. To evaluate a train-the-trainer (TTT) model designed to equip hospitalists with knowledge and skills to teach geriatric topics to residents in a time-constrained, resource-limited environment. Cross-sectional survey. Academic tertiary hospital. A 10-hour geriatric curriculum, the Reynolds Program for Advancing Geriatrics Education (PAGE), cotaught by geriatricians and hospitalists at preexisting noon conferences over 1 year that consisted of exportable teaching modules. Session leaders' and faculty participants' satisfaction, hospitalist geriatrics teaching self-efficacy, residents' self-report of frequency of geriatric teaching received, and frequency of geriatric skill use. The curriculum was highly rated by session leaders and hospitalist faculty. Hospitalists perceived improvement in geriatric teaching skills, indicating (1: "unlikely" to 5: "highly likely") that they are likely to use these teaching tools in the future (M = 4.61, standard deviation [SD] = 0.53). Residents reported both significantly more geriatrics teaching by hospitalists (P < 0.05) and a borderline significant increase in their practice of geriatric clinical skills (P = 0.05). A time-efficient geriatric faculty development program for hospitalists suggests improvement in the amount and quality of geriatrics teaching and skill practice among faculty and residents at an academic medical center. Concise faculty development programs within preexisting faculty meetings may be a feasible, successful method to increase geriatric skill development in the hospital setting. Copyright © 2010 Society of Hospital Medicine.

  11. High Efficiency Thermionics (HET-IV) and Converter Advancement (CAP) programs. Final reports

    Energy Technology Data Exchange (ETDEWEB)

    Geller, C.B.; Murray, C.S.; Riley, D.R. [Bettis Atomic Power Lab., West Mifflin, PA (United States); Desplat, J.L.; Hansen, L.K.; Hatch, G.L.; McVey, J.B.; Rasor, N.S. [Rasor Associates, Inc., Sunnyvale, CA (United States)

    1996-04-01

    This report contains the final report of the High Efficiency Thermionics (HET-IV) Program, Attachment A, performed at Rasor Associates, Inc. (RAI); and the final report of the Converter Advancement Program (CAP), performed at the Bettis Atomic Power Laboratory, Attachment B. The phenomenology of cesium-oxygen thermionic converters was elucidated in these programs, and the factors that had prevented the achievement of stable, enhanced cesium-oxygen converter performance for the previous thirty years were identified. Based on these discoveries, cesium-oxygen vapor sources were developed that achieved stable performance with factor-of-two improvements in power density and thermal efficiency, relative to conventional, cesium-only ignited mode thermionic converters. Key achievements of the HET-IV/CAP programs are as follows: a new technique for measuring minute traces of oxygen in cesium atmospheres; the determination of the proper range of oxygen partial pressures for optimum converter performance--10{sup {minus}7} to 10{sup {minus}9} torr; the discovery, and analysis of the cesium-oxygen liquid migration and compositional segregation phenomena; the successful use of capillary forces to contain the migration phenomenon; the use of differential heating to control compositional segregation, and induce vapor circulation; the development of mechanically and chemically stable, porous reservoir structures; the development of precise, in situ oxygen charging methods; stable improvements in emitter performance, up to effective emitter bare work functions of 5.4 eV; stable improvements in barrier index, to value below 1.8 Volts; the development of detailed microscopic models for cesium-oxygen reservoir dynamics and collector work function behavior; and the discovery of new relationships between electrode geometry and Schock Instability.

  12. Advanced Donation Programs and Deceased Donor-Initiated Chains-2 Innovations in Kidney Paired Donation.

    Science.gov (United States)

    Wall, Anji E; Veale, Jeffrey L; Melcher, Marc L

    2017-12-01

    Kidney paired donation (KPD) strategies have facilitated compatible living-donor kidney transplants for end-stage renal disease patients with willing but incompatible living donors. Success has inspired further innovations that expand opportunities for kidney-paired donation. Two such innovations are the advanced donation strategy in which a donor provides a kidney before their recipient is matched, or even in need of, a kidney transplant, and deceased donor initiated chains in which chains are started with deceased donors rather than altruistic living donors. Although these innovations may expand KPD, they raise several ethical issues. Specific concerns raised by advanced donation include the management of uncertainty, the extent of donor and recipient consent, the scope of the obligation that the organization has to the kidney exchange paired recipient, the naming of alternative recipients, and the potential to unfairly advantage the recipient. Use of deceased donors for chain-initiating kidneys raises ethical issues concerning the consent process for each involved party, the prioritization of deceased donor kidneys, the allocation of chain ending kidneys, and the value of a living donor kidney versus a deceased donor kidney. We outline each ethical issue and discuss how it can be conceptualized and managed so that these KPD innovations programs are ultimately successful.

  13. Effect of Advanced Trauma Life Support program on medical interns' performance in simulated trauma patient management

    Directory of Open Access Journals (Sweden)

    Ahmadi Koorosh

    2013-06-01

    Full Text Available 【Abstract】Objective: Since appropriate and time-table methods in trauma care have an important impact on patients’ outcome, we evaluated the effect of Advanced Trauma Life Support (ATLS program on medical interns' performance in simulated trauma patient management. Methods: A descriptive and analytical study before and after the training was conducted on 24 randomly se-lected undergraduate medical interns from Imam Reza Hos-pital in Mashhad, Iran. On the first day, we assessed in-terns' clinical knowledge and their practical skill performance in confronting simulated trauma patients. After 2 days of ATLS training, we performed the same study and evaluated their score again on the fourth day. The two findings, pre-and post- ATLS periods, were compared through SPSS ver-sion 15.0 software. P values less than 0.05 were considered statistically significant. Results: Our findings showed that interns’ ability in all the three tasks improved after the training course. On the fourth day after training, there was a statistically significant increase in interns' clinical knowledge of ATLS procedures, the sequence of procedures and skill performance in trauma situations (P<0.001, P=0.016 and P=0.01 respectively. Conclusion: ATLS course has an important role in increasing clinical knowledge and practical skill performance of trauma care in medical interns. Key words: Advanced Trauma Life Support Care; Knowledge; Inservice training; Wounds and injuries

  14. Advanced turbine systems program conceptual design and product development. Quarterly report, February 1995--April 1995

    Energy Technology Data Exchange (ETDEWEB)

    Karstensen, K.W.

    1995-07-01

    This Quarterly Technical Progress Report covers the period February 1, 1995, through April 30, 1995, for Phase II of the Advanced Turbine Systems (ATS) Program by Solar Turbines Incorporated under DOE contract No. DE-AC21-93MC30246. The objective of Phase II of the ATS Program is to provide the conceptual design and product development plan for an ultra high efficiency, environmentally superior and cost competitive industrial gas turbine system to be commercialized by the year 2000. A secondary objective is to begin early development of technologies critical to the success of ATS. Tasks 1, 2, 3, 5, 6 and 7 of Phase II have been completed in prior quarters. Their results have been discussed in the applicable quarterly reports and in their respective topical reports. With the exception of Task 7, final editions of these topical reports have been submitted to the DOE. This quarterly report, then, addresses only Task 4 and the nine subtasks included in Task 8, {open_quotes}Design and Test of Critical Components.{close_quotes} These nine subtasks address six ATS technologies as follows: (1) Catalytic Combustion - Subtasks 8.2 and 8.5, (2) Recuperator - Subtasks 8.1 and 8.7, (3) Autothermal Fuel Reformer - Subtask 8.3, (4) High Temperature Turbine Disc - Subtask 8.4, (5) Advanced Control System (MMI) - Subtask 8.6, and (6) Ceramic Materials - Subtasks 8.8 and 8.9. Major technological achievements from Task 8 efforts during the quarter are as follows: (1) The subscale catalytic combustion rig in Subtask 8.2 is operating consistently at 3 ppmv of NO{sub x} over a range of ATS operating conditions. (2) The spray cast process used to produce the rim section of the high temperature turbine disc of Subtask 8.4 offers additional and unplanned spin-off opportunities for low cost manufacture of certain gas turbine parts.

  15. Evaluation program of the integrated surveillance and control ISACS -- An advanced control room prototype

    Energy Technology Data Exchange (ETDEWEB)

    Holmstroem, C.B.O.; Endestad, T.; Follesoe, K.; Foerdestroemmen, N.T.; Haugset, K.; Volden, F.S. (Organization for Economic Cooperation and Development Halden Reactor Project, Halden (Norway). Inst. for Energiteknikk)

    1994-07-01

    The concept of an integrated surveillance and control system (ISACS) has been developed into a first prototype, ISACS-1, which is now in operation at the pressurized water reactor simulator-based experimental control room HAMMLAB of the Organization for Economic Cooperation and Development's Halden Reactor Project, Halden, Norway. It is characteristic of ISACS that it covers the whole interface between the process and the operator, and this interface is fully computerized using tools like cathode ray tubes and dynamic keyboards. In addition, a large number of computerized operator support systems are included in ISACS. The ISACS-1 is presently subject to extensive evaluation. The test and evaluation program aims at both providing design feedback and addressing general human-machine topics in advanced control rooms. The program is separated into three stages, starting with basic human factors work concerning layout and coding remedies. The next stage focuses on the qualitative aspects of the ISACS interface. In the final stage, the evaluation addresses higher level human factors issues, including experiments to evaluate ISAC's impact on the operator's overview and understanding of the current status of the process. The goal is to investigate how modern computer technology can be used to improve operational safety and efficiency of nuclear power plants and other complex processes.

  16. Advanced Visualization and Interactive Display Rapid Innovation and Discovery Evaluation Research (VISRIDER) Program Task 6: Point Cloud Visualization Techniques for Desktop and Web Platforms

    Science.gov (United States)

    2017-04-01

    ADVANCED VISUALIZATION AND INTERACTIVE DISPLAY RAPID INNOVATION AND DISCOVERY EVALUATION RESEARCH (VISRIDER) PROGRAM TASK 6: POINT CLOUD...To) OCT 2013 – SEP 2014 4. TITLE AND SUBTITLE ADVANCED VISUALIZATION AND INTERACTIVE DISPLAY RAPID INNOVATION AND DISCOVERY EVALUATION RESEARCH

  17. Research investigations in oil shale, tar sand, coal research, advanced exploratory process technology, and advanced fuels research: Volume 1 -- Base program. Final report, October 1986--September 1993

    Energy Technology Data Exchange (ETDEWEB)

    Smith, V.E.

    1994-05-01

    Numerous studies have been conducted in five principal areas: oil shale, tar sand, underground coal gasification, advanced process technology, and advanced fuels research. In subsequent years, underground coal gasification was broadened to be coal research, under which several research activities were conducted that related to coal processing. The most significant change occurred in 1989 when the agreement was redefined as a Base Program and a Jointly Sponsored Research Program (JSRP). Investigations were conducted under the Base Program to determine the physical and chemical properties of materials suitable for conversion to liquid and gaseous fuels, to test and evaluate processes and innovative concepts for such conversions, to monitor and determine environmental impacts related to development of commercial-sized operations, and to evaluate methods for mitigation of potential environmental impacts. This report is divided into two volumes: Volume 1 consists of 28 summaries that describe the principal research efforts conducted under the Base Program in five topic areas. Volume 2 describes tasks performed within the JSRP. Research conducted under this agreement has resulted in technology transfer of a variety of energy-related research information. A listing of related publications and presentations is given at the end of each research topic summary. More specific and detailed information is provided in the topical reports referenced in the related publications listings.

  18. Nuclear Systems Enhanced Performance Program, Maintenance Cycle Extension in Advanced Light Water Reactor Design

    Energy Technology Data Exchange (ETDEWEB)

    Professor Neill Todreas

    2001-10-01

    A renewed interest in new nuclear power generation in the US has spurred interest in developing advanced reactors with features which will address the public's concerns regarding nuclear generation. However, it is economic performance which will dictate whether any new orders for these plants will materialize. Economic performance is, to a great extent, improved by maximizing the time that the plant is on-line generating electricity relative to the time spent off-line conducting maintenance and refueling. Indeed, the strategy for the advanced light water reactor plant IRIS (International Reactor, Innovative and Secure) is to utilize an eight year operating cycle. This report describes a formalized strategy to address, during the design phase, the maintenance-related barriers to an extended operating cycle. The top-level objective of this investigation was to develop a methodology for injecting component and system maintainability issues into the reactor plant design process to overcome these barriers. A primary goal was to demonstrate the applicability and utility of the methodology in the context of the IRIS design. The first step in meeting the top-level objective was to determine the types of operating cycle length barriers that the IRIS design team is likely to face. Evaluation of previously identified regulatory and investment protection surveillance program barriers preventing a candidate operating PWR from achieving an extended (48 month) cycle was conducted in the context of the IRIS design. From this analysis, 54 known IRIS operating cycle length barriers were identified. The resolution methodology was applied to each of these barriers to generate design solution alternatives for consideration in the IRIS design. The methodology developed has been demonstrated to narrow the design space to feasible design solutions which enable a desired operating cycle length, yet is general enough to have broad applicability. Feedback from the IRIS design team

  19. Research program on development of advanced treatment technology for americium-containing aqueous waste in NUCEF

    Energy Technology Data Exchange (ETDEWEB)

    Mineo, Hideaki; Matsumura, Tatsuro; Tsubata, Yasuhiro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1996-10-01

    A research program was prepared on the development of an advanced treatment process for the americium-containing concentrated aqueous waste in NUCEF, than allows americium recovery for the reuse and the reduction of TRU waste generation. A preliminary analysis was conducted on the separation requirements based on the components estimated for the waste. An R and D strategy was proposed from the view to reduce TRU waste generated in the processing that the highest priority is given on the control of TRU leakage such as americium into the effluent stream after americium recovery and the minimization of salt used in the separation over the decontamination of impurities from americium. The extraction chromatographic method was selected as a candidate technology for americium separation under the principle to use reagents that are functional in acidic conditions such as bidentate extractants of DHEDECMP, CMPO or diamides, considering the larger flexibilities in process modification and possible multi-component separation with compact equipment and the past achievements on the recovery of kg quantities of americium. Major R and D items extracted are screening and evaluation of extractants for americium and plutonium, optimization of separation conditions, selection of denitration method, equipment developments and development of solidification methods of discarded americium after reuse and of various kinds of separation residues. In order to cope these items, four steps of R and D program were proposed, i.e., fundamental experiment in beaker-scale on screening and evaluation of extractants, flowsheet study in bench-scale using simulated and small amount of americium aqueous waste solution to evaluate candidate process, americium recovery test in iron-shielded cell to be installed in NUCEF. It is objected to make recovery of 100g orders of americium used for research on fundamental TRU fuel properties. (J.P.N.)

  20. 77 FR 24480 - Application for New Awards; Advanced Placement (AP) Test Fee Program-Reopening the AP Test Fee...

    Science.gov (United States)

    2012-04-24

    ... Application for New Awards; Advanced Placement (AP) Test Fee Program--Reopening the AP Test Fee Fiscal Year.... ACTION: Notice reopening the AP Test Fee fiscal year 2012 competition. Catalog of Federal Domestic... 8848) a notice inviting applications for the AP Test Fee fiscal year (FY) 2012 competition (February 15...

  1. Advanced Technology Development Program for Lithium-Ion Batteries: Gen 2 GDR Performance Evaluation Report

    Energy Technology Data Exchange (ETDEWEB)

    Jon P. Christophersen; Chinh D. Ho; Gary L. Henriksen; David Howell

    2006-07-01

    The Advanced Technology Development Program has completed the performance evaluation of the second generation of lithium-ion cells (i.e., Gen 2 cells). This report documents the testing and analysis of the Gen 2 GDR cells, which were used to learn and debug the newly developed Technology Life Verification Test Manual. The purpose of the manual is to project a 15-year, 150,000 mile battery life capability with a 90% confidence interval using predictive models and short-term testing. The GDR cells were divided into two different matrices. The core-life test matrix consisted of calendar- and cycle-life cells with various changes to the four major acceleration factors (temperature, state-of-charge, throughput, and power rating). The supplemental-life test matrix consisted of cells subjected either to a path dependence study, or a comparison between the standard hybrid pulse power characterization test and the newly-developed minimum pulse power characterization test. Resistance and capacity results are reported.

  2. Geotechnical advances in BC Hydro's Dam Safety Program

    Energy Technology Data Exchange (ETDEWEB)

    Lum, K.Y.; Garner, S.J. [BC Hydro, Burnaby, BC (Canada)

    2006-07-01

    BC Hydro operates 74 dams at 41 sites throughout British Columbia, providing hydroelectric power, domestic and irrigation water, recreational use and flood control to the province. Dam safety challenges in the fields of liquefaction, piping and risk assessment, have provided BC Hydro with the opportunity to participate and contribute to the development of geotechnical engineering practices in the local, national and international arenas. This paper discussed BC Hydro's contributions to the advancement of geotechnical engineering through its Dam Safety Program including the development of the Becker Penetration Test; liquefaction analyses; the remediation of earthfill dams; the understanding of piping and internal instability; the field of risk and uncertainty in dam safety; and, monitoring and assessing the performances of earthfill dams. Future challenges were also presented and discussed, with reference to the need to better understand and manage the potential ramifications of the recent trends in escalating earthquake criteria and continued improvements in managing internal erosion risks for dam safety. 43 refs., 8 figs.

  3. Nature as capital: Advancing and incorporating ecosystem services in United States federal policies and programs.

    Science.gov (United States)

    Schaefer, Mark; Goldman, Erica; Bartuska, Ann M; Sutton-Grier, Ariana; Lubchenco, Jane

    2015-06-16

    The concept of nature as capital is gaining visibility in policies and practices in both the public and private sectors. This change is due to an improved ability to assess and value ecosystem services, as well as to a growing recognition of the potential of an ecosystem services approach to make tradeoffs in decision making more transparent, inform efficient use of resources, enhance resilience and sustainability, and avoid unintended negative consequences of policy actions. Globally, governments, financial institutions, and corporations have begun to incorporate natural capital accounting in their policies and practices. In the United States, universities, nongovernmental organizations, and federal agencies are actively collaborating to develop and apply ecosystem services concepts to further national environmental and economic objectives. Numerous federal agencies have begun incorporating these concepts into land use planning, water resources management, and preparations for, and responses to, climate change. Going forward, well-defined policy direction will be necessary to institutionalize ecosystem services approaches in federal agencies, as well as to guide intersector and interdisciplinary collaborative research and development efforts. In addition, a new generation of decision support tools are needed to further the practical application of ecosystem services principles in policymaking and commercial activities. Improved performance metrics are needed, as are mechanisms to monitor the status of ecosystem services and assess the environmental and economic impacts of policies and programs. A greater national and international financial commitment to advancing ecosystem services and natural capital accounting would likely have broad, long-term economic and environmental benefits.

  4. OVERVIEW OF RECENT EXPERIMENTAL RESULTS FROM THE DIII-D ADVANCED TOKAMAK PROGRAM

    Energy Technology Data Exchange (ETDEWEB)

    BURRELL,HK

    2002-11-01

    OAK A271 OVERVIEW OF RECENT EXPERIMENTAL RESULTS FROM THE DIII-D ADVANCED TOKAMAK PROGRAM. The DIII-D research program is developing the scientific basis for advanced tokamak (AT) modes of operation in order to enhance the attractiveness of the tokamak as an energy producing system. Since the last International Atomic Energy Agency (IAEA) meeting, they have made significant progress in developing the building blocks needed for AT operation: (1) they have doubled the magnetohydrodynamic (MHD) stable tokamak operating space through rotational stabilization of the resistive wall mode; (2) using this rotational stabilization, they have achieved {beta}{sub N}H{sub 89} {ge} 10 for 4 {tau}{sub E} limited by the neoclassical tearing mode; (3) using real-time feedback of the electron cyclotron current drive (ECCD) location, they have stabilized the (m,n) = (3,2) neoclassical tearing mode and then increased {beta}{sub T} by 60%; (4) they have produced ECCD stabilization of the (2,1) neoclassical tearing mode in initial experiments; (5) they have made the first integrated AT demonstration discharges with current profile control using ECCD; (6) ECCD and electron cyclotron heating (ECH) have been used to control the pressure profile in high performance plasmas; and (7) they have demonstrated stationary tokamak operation for 6.5 s (36 {tau}{sub E}) at the same fusion gain parameter of {beta}{sub N}H{sub 89}/q{sub 95}{sup 2} {approx} 0.4 as ITER but at much higher q{sub 95} = 4.2. The authors have developed general improvements applicable to conventional and advanced tokamak operating modes: (1) they have an existence proof of a mode of tokamak operation, quiescent H-mode, which has no pulsed, ELM heat load to the divertor and which can run for long periods of time (3.8 s or 25 {tau}{sub E}) with constant density and constant radiated power; (2) they have demonstrated real-time disruption detection and mitigation for vertical disruption events using high pressure gas jet

  5. Final Project Report "Advanced Concept Exploration For Fast Ignition Science Program"

    Energy Technology Data Exchange (ETDEWEB)

    STEPHENS, Richard B.; McLEAN, Harry M.; THEOBALD, Wolfgang; AKLI, Kramer; BEG, Farhat N.; SENTOKU, Yasuiko; SCHUMACHER, Douglas; WEI, Mingsheng S.

    2014-01-31

    The Fast Ignition (FI) Concept for Inertial Confinement Fusion has the potential to provide a significant advance in the technical attractiveness of Inertial Fusion Energy (IFE) reactors. FI differs from conventional “central hot spot” (CHS) target ignition by decoupling compression from heating: using the laser (or heavy ion beam or Z pinch) drive pulse (10’s of ns) to create a dense fuel and a second, much shorter (~10 ps) high intensity pulse to ignite a small region of it. There are two major physics issues concerning this concept; controlling the laser-induced generation of large electron currents and their propagation through high density plasmas. This project has addressed these two significant scientific issues in Relativistic High Energy Density (RHED) physics. Learning to control relativistic laser matter interaction (and the limits and potential thereof) will enable a wide range of applications. While these physics issues are of specific interest to inertial fusion energy science, they are also important for a wide range of other HED phenomena, including high energy ion beam generation, isochoric heating of materials, and the development of high brightness x-ray sources. Generating, controlling, and understanding the extreme conditions needed to advance this science has proved to be challenging: Our studies have pushed the boundaries of physics understanding and are at the very limits of experimental, diagnostic, and simulation capabilities in high energy density laboratory physics (HEDLP). Our research strategy has been based on pursuing the fundamental physics underlying the Fast Ignition (FI) concept. We have performed comprehensive study of electron generation and transport in fast-ignition targets with experiments, theory, and numerical modeling. A major issue is that the electrons produced in these experiments cannot be measured directly—only effects due to their transport. We focused mainly on x-ray continuum photons from bremsstrahlung

  6. A report of advancements in structural dynamic technology resulting from Saturn 5 programs

    Science.gov (United States)

    1970-01-01

    Two volume report on practical aspects of structural dynamic analysis in Saturn 5 program is described. Volume 1 is oriented toward program managers of future structural dynamic programs. Volume 2, oriented toward technical leaders of programs, discusses methods and procedures used in Saturn 5 program.

  7. Advanced monitoring technologies for the evaluation of demand-side management programs

    Energy Technology Data Exchange (ETDEWEB)

    De Almeida, A.T. [Coimbra Univ. (Portugal). Dept. of Electrical Engineering; Vine, E.L.

    1993-06-01

    This report was commissioned by the California Institute for Energy Efficiency as part of its research mission to advance the energy efficiency and productivity of all end-use sectors in California. The aim of this study is to provide an assessment of the state-of-the-art technologies that can be used for monitoring and evaluating demand-side management (DSM) programs. Additionally, the study points out research, development, and demonstration projects whose implementation can contribute to a more accurate and cost-effective evaluation of the performance of end-use technologies. During the past two decades, technology developments in the fields of microelectronics, computers and communications had a large impact on monitoring equipment. The improvements achieved led to the appearance of increasingly powerful, convenient to use, and flexible equipment, enabling a wider application of end-use metering at a lower cost. Equipment specifications are getting closer and closer to an ``ideal`` monitoring system: Good accuracy, high reliability, moderate cost, large number of monitored end uses, large data storage capacity, flexible communications, non-intrusiveness, powerful preprocessing of data. This report briefly examines the following techniques that can be used for end-use monitoring: field test equipment, general purpose data loggers, run-time data loggers, utility-oriented data loggers, energy management systems, two-way communication, power line carrier techniques, direct and distributed load control, and non-intrusive load monitoring. The report concludes with recommendations for developing new measurement technologies, as well as additional research and development activities to support these efforts.

  8. Advanced research and technology development fossil energy materials program. Quarterly progress report for the period ending September 30, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Bradley, R.A. (comp.)

    1981-12-01

    This is the fourth combined quarterly progress report for those projects that are part of the Advanced Research and Technology Development Fossil Energy Materials Program. The objective is to conduct a program of research and development on materials for fossil energy applications with a focus on the longer-term and generic needs of the various fossil fuel technologies. The program includes research aimed toward a better understanding of materials behavior in fossil energy environments and the development of new materials capable of substantial enhancement of plant operations and reliability. Work performed on the program generally falls into the Applied Research and Exploratory Development categories as defined in the DOE Technology Base Review, although basic research and engineering development are also conducted. A substantial portion of the work on the AR and TD Fossil Energy Materials Program is performed by participating cntractor organizations. All subcontractor work is monitored by Program staff members at ORNL and Argonne National Laboratory. This report is organized in accordance with a work breakdown structure defined in the AR and TD Fossil Energy Materials Program Plan for FY 1981 in which projects are organized according to fossil energy technologies. We hope this series of AR and TD Fossil Energy Materials Program quarterly progress reports will aid in the dissemination of information developed on the program.

  9. Interfacing theories of program with theories of evaluation for advancing evaluation practice: Reductionism, systems thinking, and pragmatic synthesis.

    Science.gov (United States)

    Chen, Huey T

    2016-12-01

    Theories of program and theories of evaluation form the foundation of program evaluation theories. Theories of program reflect assumptions on how to conceptualize an intervention program for evaluation purposes, while theories of evaluation reflect assumptions on how to design useful evaluation. These two types of theories are related, but often discussed separately. This paper attempts to use three theoretical perspectives (reductionism, systems thinking, and pragmatic synthesis) to interface them and discuss the implications for evaluation practice. Reductionism proposes that an intervention program can be broken into crucial components for rigorous analyses; systems thinking view an intervention program as dynamic and complex, requiring a holistic examination. In spite of their contributions, reductionism and systems thinking represent the extreme ends of a theoretical spectrum; many real-world programs, however, may fall in the middle. Pragmatic synthesis is being developed to serve these moderate- complexity programs. These three theoretical perspectives have their own strengths and challenges. Knowledge on these three perspectives and their evaluation implications can provide a better guide for designing fruitful evaluations, improving the quality of evaluation practice, informing potential areas for developing cutting-edge evaluation approaches, and contributing to advancing program evaluation toward a mature applied science. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Position Paper: General Practice Residency and Advanced Education in General Dentistry Programs: Curriculum.

    Science.gov (United States)

    Brody, Harvey A.

    1983-01-01

    A comparison of curricula for the two kinds of postdoctoral dental education programs examines clinical curriculum, program design, hospital-based and non-hospital-based programs, patient population, needs for such specialization, program length, and suggested changes and additions. (MSE)

  11. Fossil Energy Advanced Research and Technology Development (AR&TD) Materials Program semiannual progress report for the period ending September 30, 1991. Fossil Energy Program

    Energy Technology Data Exchange (ETDEWEB)

    Judkins, R.R.; Cole, N.C. [comps.

    1992-04-01

    The objective of the Fossil Energy Advanced Research and Technology Development Materials Program is to conduct research and development on materials for fossil energy applications with a focus on the longer-term and generic needs of the various fossil fuel technologies. The Program includes research aimed toward a better understanding of materials behavior in fossil energy environments and the development of new materials capable of substantial enhancement of plant operations and reliability. Research is outlined in four areas: Ceramics, New Alloys, Corrosion and Erosion Research, and Technology Development and Transfer. (VC)

  12. BOOK REVIEW: Advanced Topics in Computational Partial Differential Equations: Numerical Methods and Diffpack Programming

    Science.gov (United States)

    Katsaounis, T. D.

    2005-02-01

    The scope of this book is to present well known simple and advanced numerical methods for solving partial differential equations (PDEs) and how to implement these methods using the programming environment of the software package Diffpack. A basic background in PDEs and numerical methods is required by the potential reader. Further, a basic knowledge of the finite element method and its implementation in one and two space dimensions is required. The authors claim that no prior knowledge of the package Diffpack is required, which is true, but the reader should be at least familiar with an object oriented programming language like C++ in order to better comprehend the programming environment of Diffpack. Certainly, a prior knowledge or usage of Diffpack would be a great advantage to the reader. The book consists of 15 chapters, each one written by one or more authors. Each chapter is basically divided into two parts: the first part is about mathematical models described by PDEs and numerical methods to solve these models and the second part describes how to implement the numerical methods using the programming environment of Diffpack. Each chapter closes with a list of references on its subject. The first nine chapters cover well known numerical methods for solving the basic types of PDEs. Further, programming techniques on the serial as well as on the parallel implementation of numerical methods are also included in these chapters. The last five chapters are dedicated to applications, modelled by PDEs, in a variety of fields. The first chapter is an introduction to parallel processing. It covers fundamentals of parallel processing in a simple and concrete way and no prior knowledge of the subject is required. Examples of parallel implementation of basic linear algebra operations are presented using the Message Passing Interface (MPI) programming environment. Here, some knowledge of MPI routines is required by the reader. Examples solving in parallel simple PDEs using

  13. Results from the DOE Advanced Gas Reactor Fuel Development and Qualification Program

    Energy Technology Data Exchange (ETDEWEB)

    David Petti

    2014-06-01

    Modular HTGR designs were developed to provide natural safety, which prevents core damage under all design basis accidents and presently envisioned severe accidents. The principle that guides their design concepts is to passively maintain core temperatures below fission product release thresholds under all accident scenarios. This level of fuel performance and fission product retention reduces the radioactive source term by many orders of magnitude and allows potential elimination of the need for evacuation and sheltering beyond a small exclusion area. This level, however, is predicated on exceptionally high fuel fabrication quality and performance under normal operation and accident conditions. Germany produced and demonstrated high quality fuel for their pebble bed HTGRs in the 1980s, but no U.S. manufactured fuel had exhibited equivalent performance prior to the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. The design goal of the modular HTGRs is to allow elimination of an exclusion zone and an emergency planning zone outside the plant boundary fence, typically interpreted as being about 400 meters from the reactor. To achieve this, the reactor design concepts require a level of fuel integrity that is better than that claimed for all prior US manufactured TRISO fuel, by a few orders of magnitude. The improved performance level is about a factor of three better than qualified for German TRISO fuel in the 1980’s. At the start of the AGR program, without a reactor design concept selected, the AGR fuel program selected to qualify fuel to an operating envelope that would bound both pebble bed and prismatic options. This resulted in needing a fuel form that could survive at peak fuel temperatures of 1250°C on a time-averaged basis and high burnups in the range of 150 to 200 GWd/MTHM (metric tons of heavy metal) or 16.4 to 21.8% fissions per initial metal atom (FIMA). Although Germany has demonstrated excellent performance of TRISO-coated UO

  14. Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development Program. Progress report, January 1, 1980-March 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-25

    Results are presented of work performed on the Advanced Gas-Cooled Nuclear Reactor Materials Evaluation and Development Program. The objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the effect of simulated reactor primary coolant (helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Included are the activities associated with the status of the simulated reactor helium supply system, testing equipment and gas chemistry analysis instrumentation and equipment. The progress in the screening test program is described, including screening creep results and metallographic analysis for materials thermally exposed or tested at 750, 850, and 950/sup 0/C.

  15. Advanced Gas-Cooled Nuclear Reactor Materials Evaluation and Development Program. Progress report, July 1, 1979-September 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-03-07

    The results of work performed from July 1, 1979 through September 30, 1979 on the Advanced Gas-Cooled Nuclear Reactor Materials Evaluation and Development Program are presented. The objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the effect of simulated reactor primary coolant (helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Work covered in this report includes the activities associated with the status of the simulated reactor helium supply system, testing equipment, and gas chemistry analysis instrumentation and equipment. The status of the data management system is presented. In addition, the progress in the screening test program is described.

  16. Advanced Gas-Cooled Nuclear Reactor Materials Evaluation and Development Program. Progress report, April 1, 1979-June 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-25

    The results are presented of work performed on the Advanced Gas-Cooled Nuclear Reactor Materials Evaluation and Development Program. The objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the effect of simulated reactor primary coolant (helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Work covered in this report includes the activities associated with the status of the simulated reactor helium supply system, testing equipment, and gas chemistry analysis instrumentation and equipment. The status of the data management system is presented. In addition, the progress in the screening test program is described.

  17. Strategies for Success of Women Faculty in Science: The ADVANCE Program at the University of Rhode Island

    Science.gov (United States)

    Wishner, K.; Silver, B.; Boudreaux-Bartels, F.; Harlow, L.; Knickle, H.; Mederer, H.; Peckham, J.; Roheim, C.; Trubatch, J.; Webster, K.

    2004-12-01

    The NSF-funded ADVANCE program seeks to increase the recruitment and retention of women faculty in science, technology, engineering, and mathematics (STEM) disciplines as part of a national goal of creating a broad-based scientific workforce able to effectively address societal demands. The University of Rhode Island, a recipient of an Institutional Transformation ADVANCE grant in 2003, has begun a campus-wide initiative. The 5 goals are (1) to increase the numbers of women STEM faculty, (2) to provide faculty development opportunities, (3) to improve networks of professional and social support, (4) to assess the academic work environment for all faculty, and (5) to implement long-term changes throughout the university that promote a supportive work environment for women STEM faculty. Accomplishments during the first year include (1) hiring several ADVANCE Assistant Professors, (2) developing workshops on critical skills for junior faculty (grant writing, negotiations, mentoring), (3) initiating a series of lunch meetings where pertinent topical and work-family issues are discussed informally, (4) awarding small Incentive grants for research and other projects that enhance the careers of women STEM faculty, (5) developing and modifying university policies on family leave and dual career couple recruitment, (6) developing and implementing quantitative and qualitative assessment tools for baseline and ongoing campus-wide work climate surveys within the context of a theoretical model for change, and (7) offering directed self-study workshops for entire departments using a trained facilitator. The ADVANCE Assistant Professor position, unique to URI's program, allows a new hire to spend the first 2-3 years developing a research program without teaching obligations. ADVANCE pays their salary during this time, at which point they transition to a regular faculty position. During this first of five years of NSF funding, the ADVANCE program has been met with campus wide

  18. Development of a tribology thesaurus and on evaluation of the tribology advancement program by means of descriptors

    Science.gov (United States)

    Czichos, H.

    The area of tribology is characterized by a variety of technical problems, tribological processes, and parameters. The presentation and application of the results of tribological research and development work must, therefore, include a consideration of many parameters. A systematic thesaurus for tribology was developed, taking into account the results of an analysis of tribological measured quantities and test parameters. The descriptors of the thesaurus were used for an evaluation of 95 projects of the completed parts of the tribology advancement program, giving attention to areas of application, aspects of wear, materials and pairs of materials, liquids and lubricating characteristics, types of friction, lubricating conditions, types of wear, methods of investigation, and measured quantities. The evaluation shows that the tribology advancement program has made important contributions to a reduction of material and energy losses related to friction and wear processes.

  19. Advanced placement, qualifying, and degree completion programs for internationally trained dentists in Canada and the United States: an overview.

    Science.gov (United States)

    Boorberg, Noriko B; Schönwetter, Dieter J; Swain, Vanessa L

    2009-03-01

    Canadian and U.S. universities are faced with the challenge that they are not graduating enough dentists to meet the future needs of the Canadian and U.S. populations. Foreign-trained dentists represent a valuable resource to society and the economy. Dental programs have been established to train foreign-trained dentists for some or all of the following reasons: public need for health care services, income generation for universities, and demand by foreign-trained dentists who desire to practice dentistry in Canada or the United States rather than in their own nation. Changes implemented by the National Dental Examining Board (NDEB) of Canada in 2000 and by the Commission on Dental Accreditation (CODA) in the United States in 1986 have resulted in foreign-trained dentists no longer being able to gain dental licensure in these countries strictly through a certification examination. Foreign-trained dentists are now required to apply for and complete a two- to three-year advanced placement, qualifying, or degree program at a Canadian or U.S. dental school prior to receiving licensure to practice. The study reported in this article investigated the various types of advanced placement, qualifying, or degree programs available to foreign-trained dentists wishing to practice in either Canada or the United States and the differences among these programs. This research provides a better understanding of the various commonalities and differences among Canadian and U.S. programs for internationally trained dentists.

  20. A Review of Advance Care Planning Programs in Long-Term Care Homes: Are They Dementia Friendly?

    Directory of Open Access Journals (Sweden)

    Abigail Wickson-Griffiths

    2014-01-01

    Full Text Available Background. Persons living with dementia in the long-term care home (LTCH setting have a number of unique needs, including those related to planning for their futures. It is therefore important to understand the advance care planning (ACP programs that have been developed and their impact in order for LTCH settings to select a program that best suits residents’ needs. Methods. Four electronic databases were searched from 1990 to 2013, for studies that evaluated the impact of advance care planning programs implemented in the LTCH setting. Studies were critically reviewed according to rigour, impact, and the consideration of the values of residents with dementia and their family members according to the Dementia Policy Lens Toolkit. Results and Conclusion. Six ACP programs were included in the review, five of which could be considered more “dementia friendly.” The programs indicated a variety of positive impacts in the planning and provision of end-of-life care for residents and their family members, most notably, increased ACP discussion and documentation. In moving forward, it will be important to evaluate the incorporation of residents with dementia’s values when designing or implementing ACP interventions in the LTCH settings.

  1. ADVANCING THE STUDY OF VIOLENCE AGAINST WOMEN USING MIXED METHODS: INTEGRATING QUALITATIVE METHODS INTO A QUANTITATIVE RESEARCH PROGRAM

    Science.gov (United States)

    Testa, Maria; Livingston, Jennifer A.; VanZile-Tamsen, Carol

    2011-01-01

    A mixed methods approach, combining quantitative with qualitative data methods and analysis, offers a promising means of advancing the study of violence. Integrating semi-structured interviews and qualitative analysis into a quantitative program of research on women’s sexual victimization has resulted in valuable scientific insight and generation of novel hypotheses for testing. This mixed methods approach is described and recommendations for integrating qualitative data into quantitative research are provided. PMID:21307032

  2. Advancing the study of violence against women using mixed methods: integrating qualitative methods into a quantitative research program.

    Science.gov (United States)

    Testa, Maria; Livingston, Jennifer A; VanZile-Tamsen, Carol

    2011-02-01

    A mixed methods approach, combining quantitative with qualitative data methods and analysis, offers a promising means of advancing the study of violence. Integrating semi-structured interviews and qualitative analysis into a quantitative program of research on women's sexual victimization has resulted in valuable scientific insight and generation of novel hypotheses for testing. This mixed methods approach is described and recommendations for integrating qualitative data into quantitative research are provided.

  3. ADVANCING THE STUDY OF VIOLENCE AGAINST WOMEN USING MIXED METHODS: INTEGRATING QUALITATIVE METHODS INTO A QUANTITATIVE RESEARCH PROGRAM

    OpenAIRE

    Testa, Maria; Livingston, Jennifer A.; VanZile-Tamsen, Carol

    2011-01-01

    A mixed methods approach, combining quantitative with qualitative data methods and analysis, offers a promising means of advancing the study of violence. Integrating semi-structured interviews and qualitative analysis into a quantitative program of research on women’s sexual victimization has resulted in valuable scientific insight and generation of novel hypotheses for testing. This mixed methods approach is described and recommendations for integrating qualitative data into quantitative res...

  4. Fossil Energy Advanced Research and Technology Development Materials Program. Semiannual progress report for the period ending September 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Cole, N.C.; Judkins, R.R. [comps.

    1992-12-01

    Objective of this materials program is to conduct R and D on materials for fossil energy applications with focus on longer-term and generic needs of the various fossil fuel technologies. The projects are organized according to materials research areas: (1) ceramics, (2) new alloys: iron aluminides, advanced austenitics and chromium niobium alloys, and (3) technology development and transfer. Separate abstracts have been prepared.

  5. Curriculum development for an advanced regional anesthesia education program: one institution's experience from apprenticeship to comprehensive teaching.

    Science.gov (United States)

    Ouanes, Jean-Pierre P; Schwengel, Deborah; Mathur, Vineesh; Ahmed, Omar I; Hanna, Marie N

    2014-02-01

    Results of recent attitude survey studies suggest that most practicing physicians are inadequately treating postoperative pain. Residents in anesthesia are confident in performing lumbar epidural and spinal anesthesia, but many are not confident in performing the blocks with which they have the least exposure. Changes need to be made in the training processes to a comprehensive model that prepares residents to perform a wider array of blocks in postgraduate practice. Here, we describe one institution's approach to creating a standardized, advanced regional anesthesia curriculum for residents that follows the six core competencies of the ACGME. Residents received training in anatomy dissection, ultrasound-guided regional anesthesia, traditional nerve stimulation techniques, problem-based learning and simulation sessions, oral board presentation sessions, and journal club sessions. Residents kept a detailed log for their use of peripheral nerve block procedures. We have now redesigned and implemented an advanced regional anesthesia program within our institution to provide residents with experience in regional anesthesia at a competent level. Resident's knowledge in regional anesthesia did improve after the first year of implementation as reflected in improvements between the pre- and post-tests. As the advanced regional anesthesia education program continues to improve, we hope to demonstrate levels of validity, reliability, and usability by other programs.

  6. ADVANCED SORBENT DEVELOPMENT PROGRAM DEVELOPMENT OF SORBENTS FOR MOVING-BED AND FLUIDIZED-BED APPLICATIONS

    Energy Technology Data Exchange (ETDEWEB)

    R.E Ayala; V.S. Venkataramani; Javad Abbasian; Rachid B. Slimane; Brett E. Williams; Minoo K. Zarnegar; James R. Wangerow; Andy H. Hill

    2000-03-31

    The integrated gasification combined cycle (IGCC) power system using high-temperature coal gas cleanup is one of the most promising advanced technologies for the production of electric power from coal in an environmentally acceptable manner. Unlike conventional low-temperature cleanup systems that require costly heat exchangers, high-temperature coal gas cleanup systems can be operated near 482-538 C (900-1000 F) or higher, conditions that are a closer match with the gasifier and turbine components in the IGCC system, thus resulting is a more efficient overall system. GE is developing a moving-bed, high-temperature desulfurization system for the IGCC power cycle in which zinc-based regenerable sorbents are currently being used as desulfurization sorbents. Zinc titanate and other proprietary zinc-based oxides are being considered as sorbents for use in the Clean Coal Technology Demonstration Program at Tampa Electric Co.'s (TECo) Polk Power Station. Under cold startup conditions at TECo, desulfurization and regeneration may be carried out at temperatures as low as 343 C (650 F), hence a versatile sorbent is desirable to perform over this wide temperature range. A key to success in the development of high-temperature desulfurization systems is the matching of sorbent properties for the selected process operating conditions, namely, sustainable desulfurization kinetics, high sulfur capacity, and mechanical durability over multiple cycles. Additionally, the sulfur species produced during regeneration of the sorbent must be in a form compatible with sulfur recovery systems, such as sulfuric acid or elemental sulfur processes. The overall objective of this program is to develop regenerable sorbents for hydrogen sulfide removal from coal-derived fuel gases in the temperature range 343-538 C (650-1000 F). Two categories of reactor configurations are being considered: moving-bed reactors and fluidized-bed (bubbling and circulating) reactors. In addition, a cost

  7. ADVANCED SORBENT DEVELOPMENT PROGRAM; DEVELOPMENT OF SORBENTS FOR MOVING-BED AND FLUIDIZED-BED APPLICATIONS

    Energy Technology Data Exchange (ETDEWEB)

    AYALA, R E; VENKATARAMANI, V S

    1998-09-30

    The integrated gasification combined cycle (IGCC) power system using high-temperature coal gas cleanup is one of the most promising advanced technologies for the production of electric power from coal in an environmentally acceptable manner. Unlike conventional low-temperature cleanup systems that require costly heat exchangers, high-temperature coal gas cleanup systems can be operated near 482-538 °C (900-1000 °F) or higher, conditions that are a closer match with the gasifier and turbine components in the IGCC system, thus resulting is a more efficient overall system. GE is developing a moving-bed, high-temperature desulfurization system for the IGCC power cycle in which zinc-based regenerable sorbents are currently being used as desulfurization sorbents. Zinc titanate and other proprietary zinc-based oxides are being considered as sorbents for use in the Clean Coal Technology Demonstration Program at Tampa Electric Co.'s (TECo) Polk Power Station. Under cold startup conditions at TECo, desulfurization and regeneration may be carried out at temperatures as low as 343 °C (650 °F), hence a versatile sorbent is desirable to perform over this wide temperature range. A key to success in the development of high-temperature desulfurization systems is the matching of sorbent properties for the selected process operating conditions, namely, sustainable desulfurization kinetics, high sulfur capacity, and mechanical durability over multiple cycles. Additionally, the sulfur species produced during regeneration of the sorbent must be in a form compatible with sulfur recovery systems, such as sulfuric acid or elemental sulfur processes. The overall objective of this program is to develop regenerable sorbents for hydrogen sulfide removal from coal-derived fuel gases in the temperature range 343-538 °C (650-1000 °F). Two categories of reactor configurations are being considered: moving-bed reactors and fluidized-bed (bubbling and circulating) reactors. In addition, a

  8. The Program Directors' Perspective on the Goals and Objectives of Advanced General Dentistry Training.

    Science.gov (United States)

    Badner, Victor M.; And Others

    1994-01-01

    A survey of 265 postgraduate general dentistry program directors and dental general practice residency directors found substantial agreement about the relative importance of various program goals and curriculum areas. The largest differences were found among site types (e.g., hospitals vs. dental schools) not program types. (MSE)

  9. WPA ISSPD educational program: Module II. Advances in research and understanding of personality disorders

    DEFF Research Database (Denmark)

    Ronningstam, Elsa; Simonsen, Erik; Millon, Theodore

    2009-01-01

    Recent advances in research, clinical observations and treatment have contributed to several major changes in the conceptualization of personality disorders. Featured in an educational programme on personality disorders prepared by the World Psychiatric Association (WPA) Section on Personality Di...

  10. 77 FR 8848 - Application for New Awards; Advanced Placement (AP) Test Fee Program

    Science.gov (United States)

    2012-02-15

    ..., Native American) public school students nationally; (3) The percentage of advanced placement tests passed... the Federal Digital System at: www.gpo.gov/fdsys . At this site you can view this document, as well as...

  11. Review of the cultivation program within the national alliance for advanced biofuels and bioproducts

    Science.gov (United States)

    The cultivation efforts within the National Alliance for Advanced Biofuels and Bioproducts (NAABB) were developed to provide four major goals for the consortium, which included biomass production for downstream experimentation, development of new assessment tools for cultivation, development of new ...

  12. NASA's advanced control law program for the F-8 digital fly-by-wire aircraft

    Science.gov (United States)

    Elliott, J. R.

    1977-01-01

    This paper briefly describes the NASA F-8 Digital Fly-By-Wire (DFBW) and Langley Research Center's role in investigating and promoting advanced control laws for possible flight experimentation and also provides a brief description of the Phase II DFBW F-8 aircraft and its control system. Some of the advanced control law study objectives and guidelines are discussed, and some mathematical models which are useful in the control analysis problem are provided.

  13. Advanced gas cooled nuclear reactor materials evaluation and development program. Progress report, January 1, 1979-March 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1979-07-19

    This report presents the results of work performed from January 1, 1979 through March 31, 1979 on the Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development Program. The objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the effect of simulated reactor primary coolant (helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. Work covered in this report includes the activities associated with the creep-rupture testing of the test materials for the purpose of verifying the stresses selected for the screening creep test program, and the status of the simulated reactor helium supply system, testing equipment, and gas chemistry analysis instrumentation and equipment.

  14. Advanced gas cooled nuclear reactor materials evaluation and development program. Progress report, September 23, 1976--December 31, 1976

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-01

    This report presents the results of work performed from September 23, 1976 through December 31, 1976 on the Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development Program. The objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Process Heat and Direct Cycle Helium Turbine (DCHT) applications, in terms of the affect of simulated reactor primary coolant (impure Helium), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Work covered in this report includes progress to date on alloy selection for VHTR Nuclear Process Heat (NPH) applications and for DCHT applications. The present status on the simulated reactor helium loop design and on designs for the testing and analysis facilities and equipment is discussed.

  15. Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development Program. Progress report, October 1, 1978--December 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    1979-03-09

    Results of work performed from October 1, 1978 through December 31, 1978 on the Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development Program is presented. Objectives are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the effect of simulated reactor primary coolant (helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys, and selection of materials for future test facilities and more extensive qualification programs. The activities associated with the characterization of the materials for the screening test program, and the status of the simulated reactor helium supply system, testing equipment, and gas chemistry analysis instrumentation and equipment are included. The status of the data management system is presented.

  16. Final Report - Advanced Ion Trap Mass Spectrometry Program - Oak Ridge National Laboratory - Sandia National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Whitten, W.B.

    2002-12-18

    This report covers the three main projects that collectively comprised the Advanced Ion Trap Mass Spectrometry Program. Chapter 1 describes the direct interrogation of individual particles by laser desorption within the ion trap mass spectrometer analyzer. The goals were (1) to develop an ''intelligent trigger'' capable of distinguishing particles of biological origin from those of nonbiological origin in the background and interferent particles and (2) to explore the capability for individual particle identification. Direct interrogation of particles by laser ablation and ion trap mass spectrometry was shown to have good promise for discriminating between particles of biological origin and those of nonbiological origin, although detailed protocols and operating conditions were not worked out. A library of more than 20,000 spectra of various types of biological particles has been assembled. Methods based on multivariate analysis and on neural networks were used to discriminate between particles of biological origin and those of nonbiological origin. It was possible to discriminate between at least some species of bacteria if mass spectra of several hundred similar particles were obtained. Chapter 2 addresses the development of a new ion trap mass analyzer geometry that offers the potential for a significant increase in ion storage capacity for a given set of analyzer operating conditions. This geometry may lead to the development of smaller, lower-power field-portable ion trap mass spectrometers while retaining laboratory-scale analytical performance. A novel ion trap mass spectrometer based on toroidal ion storage geometry has been developed. The analyzer geometry is based on the edge rotation of a quadrupolar ion trap cross section into the shape of a torus. Initial performance of this device was poor, however, due to the significant contribution of nonlinear fields introduced by the rotation of the symmetric ion-trapping geometry. These

  17. Inquiry-based learning and critical thinking in an advanced practice psychiatric nursing program.

    Science.gov (United States)

    Flannelly, L; Inouye, J

    1998-06-01

    The advanced practice psychiatric nurse must be prepared to meet the changing demands being placed on the nursing profession. Some changes are the product of health care reforms, especially managed care. Others are more fundamental, because continuing scientific advances drive rapid changes in the knowledge base required of mental health nurses. Curricular reforms initiated earlier this decade were intended to equip nurses with the problem-solving and critical-thinking skills required to deal with novel and complex situations in a rapidly changing healthcare system. This article describes how the Inquiry-Based Learning tutorial method attends to the mental processes of graduate students and fosters critical-thinking skills.

  18. The Advanced Education in General Dentistry Program at the University of Maryland at Baltimore.

    Science.gov (United States)

    Barnes, Douglas M.; Blank, Lawrence W.

    1991-01-01

    The University of Maryland at Baltimore's 12-month graduate program in general dentistry focuses on comprehensive care and treatment planning in a simulated group practice environment. To achieve its goal of self-support, the program solicits training grants from international corporations, generates income from clinical facilities, encourages…

  19. 78 FR 54255 - HRSA's Bureau of Health Professions Advanced Education Nursing Traineeship Program

    Science.gov (United States)

    2013-09-03

    ... Education Nursing Traineeship Program AGENCY: Health Resources and Services Administration (HRSA), HHS... Education Nursing Traineeship (AENT) program. Effective fiscal year (FY) 2014, AENT support for part-time...) nearing graduation, in an effort to expeditiously meet the growing demand for primary care nurse...

  20. 78 FR 34975 - Notice of Contract Proposals (NOCP) for the Advanced Biofuels Payment Program

    Science.gov (United States)

    2013-06-11

    ..., [email protected] . Maine Beverly Stone, USDA Rural Development, 967 Illinois Avenue, Suite 4, Bangor, ME 04401-2767, (207) 990-9168, beverly.stone@me.usda.gov . Maryland (see Delaware) Massachusetts... Agency will provide payments to eligible solid advanced biofuels produced from forest biomass of not more...

  1. Advanced Light Source First-Phase Scientific Program, 1993/1994

    Energy Technology Data Exchange (ETDEWEB)

    1992-08-01

    This composite document outlines ten different experiments planned for the beamline at the Advanced Light Source. Researchers from various parts of the country have detailed their methods and equipment to be used in experiments in biology and physics. X-ray spectroscopy and microscopy are the common topics to these experiments. (GHH)

  2. The Science Advancement through Group Engagement Program: Leveling the Playing Field and Increasing Retention in Science

    Science.gov (United States)

    Hall, Donna M.; Curtin-Soydan, Amanda J.; Canelas, Dorian A.

    2014-01-01

    How can colleges and universities keep an open gateway to the science disciplines for the least experienced first-year science students while also maintaining high standards that challenge the students with the strongest possible high school backgrounds? The Science Advancement through Group Engagement (SAGE) project targets cohorts of less…

  3. Nuclear proliferation and civilian nuclear power. Report of the Nonproliferation Alternative Systems Assessment Program. Volume VIII. Advanced concepts

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    The goal of the Nonproliferation Alternative Systems Assessment Program has been to provide recommendations for the development and deployment of more proliferation-resistant civilian nuclear-power systems without jeopardizing the development of nuclear energy. In principle, new concepts for nuclear-power systems could be designed so that materials and facilities would be inherently more proliferation-resistant. Such advanced, i.e., less-developed systems, are the subject of this volume. Accordingly, from a number of advanced concepts that were proposed for evaluation, six representative concepts were selected: the fast mixed-spectrum reactor; the denatured molten-salt reactor; the mixed-flow gaseous-core reactor; the linear-accelerator fuel-regenerator reactor; the ternary metal-fueled electronuclear fuel-producer reactor; and the tokamak fusion-fission hybrid reactor.

  4. Advancing Systems Engineering Excellence: The Marshall Systems Engineering Leadership Development Program

    Science.gov (United States)

    Hall, Philip; Whitfield, Susan

    2011-01-01

    As NASA undertakes increasingly complex projects, the need for expert systems engineers and leaders in systems engineering is becoming more pronounced. As a result of this issue, the Agency has undertaken an initiative to develop more systems engineering leaders through its Systems Engineering Leadership Development Program; however, the NASA Office of the Chief Engineer has also called on the field Centers to develop mechanisms to strengthen their expertise in systems engineering locally. In response to this call, Marshall Space Flight Center (MSFC) has developed a comprehensive development program for aspiring systems engineers and systems engineering leaders. This presentation will summarize the two-level program, which consists of a combination of training courses and on-the-job, developmental training assignments at the Center to help develop stronger expertise in systems engineering and technical leadership. In addition, it will focus on the success the program has had in its pilot year. The program hosted a formal kickoff event for Level I on October 13, 2009. The first class includes 42 participants from across MSFC and Michoud Assembly Facility (MAF). A formal call for Level II is forthcoming. With the new Agency focus on research and development of new technologies, having a strong pool of well-trained systems engineers is becoming increasingly more critical. Programs such as the Marshall Systems Engineering Leadership Development Program, as well as those developed at other Centers, help ensure that there is an upcoming generation of trained systems engineers and systems engineering leaders to meet future design challenges.

  5. Advanced Crash Avoidance Technologies (ACAT) Program - Final Report of the Volvo-Ford-UMTRI Project: Safety Impact Methodology for Lane Departure Warning - Method Development and Estimation of Benefits

    Science.gov (United States)

    2010-10-01

    The Volvo-Ford-UMTRI project: Safety Impact Methodology (SIM) for Lane Departure Warning is part of the U.S. Department of Transportation's Advanced Crash Avoidance Technologies (ACAT) program. The project developed a basic analytical framework for e...

  6. Use of the Advanced Communications Technology Satellite to Promote International Distance Education Programs for Georgetown University

    Science.gov (United States)

    Bradley, Harold; Kauffman, Amy

    1996-01-01

    Georgetown's distance education program is designed to demonstrate to faculty and administrators the feasibility and desirability of using two-way video transmission for international education. These programs will extend the reach of Georgetown's educational offerings; enrich the curriculum and content of Georgetown's offerings by interaction with institutions in other nations; enhance the world view of the School of Business Administration; enable Georgetown to share its resources with other institutions outside of the United States; and promote Commerce within the Americas. The primary reason for this pilot program is to evaluate the effectiveness and economic viability of offering academic courses and Small Business Development training.

  7. The Impacts of Theme-Based Language Instruction: A Case Study of an Advanced Chinese Intensive Program

    Directory of Open Access Journals (Sweden)

    Song Jiang

    2017-06-01

    Full Text Available Theme-based language teaching under Content-Based Instruction (CBI is a pedagogical approach that emphasizes learning professional content along with language skills. This paper reports a case study on the impacts of a theme-based advanced Chinese intensive program in a university setting. It begins with a review of CBI and its theme-based approach and then discusses the program design, curriculum development, and instructional practice of the program. The impacts of the theme-based approach are examined based on the pre- and post-proficiency test results, learners’ self-reported surveys on the themes and topics, and the reading strategies covered in the program. Qualitative analysis of learners’ self-reflections and program evaluations is also presented. Based on the evidence collected, this paper argues that the theme-based model has positive impacts on improving language proficiency, preparing for academic and professional language use, cultivating strategic language learners, and revitalizing Chinese teaching at the superior level.

  8. Space station systems technology study (add-on task). Volume 3: Technology advancement program plan

    Science.gov (United States)

    1985-01-01

    Program plans are given for an integrating controller for space station autonomy as well as for controls and displays. The technical approach, facility requirements and candidate facilities, development schedules, and resource requirements estimates are given.

  9. Improving outcomes for persons with aphasia in advanced community-based treatment programs

    National Research Council Canada - National Science Library

    Aftonomos, L B; Appelbaum, J S; Steele, R D

    1999-01-01

    .... We explore this issue here in an outcome study of individuals with aphasia enrolled in 2 community-based, comparably managed and equipped therapy programs, which use a specially designed computer...

  10. The Impact of an Advanced Certificate in Education (ACE Program on the Professional Practice of Graduates

    Directory of Open Access Journals (Sweden)

    Ruth Folake Aluko

    2009-09-01

    Full Text Available This paper examines the impact of a distance education program offered by the University of Pretoria, South Africa, on the professional practice of teachers. A pilot study was conducted using a combination of surveys and focus group interviews. Findings reveal that the program was beneficial to graduates’ personal development, professional practice, schools, learners, and colleagues. Further, principals who participated in the study attested to the differences they observed between the graduates and other teachers who had not been exposed to such a program. Suggestions for improvements included the introduction of subjects taught at school as areas of specialization, involvement of school principals in the assessment of enrolled students, visits to schools by the organizers, and exposure of students to the practical opportunities offered by the program (with portfolios that could be a part of the assessment.

  11. The National Shipbuilding Research Program. Short Course on Implementing Advanced Technology. Course Notes

    Science.gov (United States)

    1996-01-01

    Recognition of accomplishment (of individ- ual or team), . Experienced engineering management per- sonnel, . Proper technical direction and leardership ...ADVANCED TECHNOLOGY COURSE BOOK CONTENTS AGENDA SETTING THE STAGE THE CANDY STORE MANAGING CHANGE THE TOOLS TEAMS WORLD SHIPBUILDING SHIPBUILDING...U.S. SHIPBUILDING,” PAPER PRESENTED TO SNAME BY T. LAMB, ET AL, OCT 5, 1995 WHAT IS WORLD CLASS? TOTAL QUALITY MANAGEMENT SEAMLESS ENTERPRISES RE

  12. Technology Roadmap Instrumentation, Control, and Human-Machine Interface to Support DOE Advanced Nuclear Energy Programs

    Energy Technology Data Exchange (ETDEWEB)

    Donald D Dudenhoeffer; Burce P Hallbert

    2007-03-01

    Instrumentation, Controls, and Human-Machine Interface (ICHMI) technologies are essential to ensuring delivery and effective operation of optimized advanced Generation IV (Gen IV) nuclear energy systems. In 1996, the Watts Bar I nuclear power plant in Tennessee was the last U.S. nuclear power plant to go on line. It was, in fact, built based on pre-1990 technology. Since this last U.S. nuclear power plant was designed, there have been major advances in the field of ICHMI systems. Computer technology employed in other industries has advanced dramatically, and computing systems are now replaced every few years as they become functionally obsolete. Functional obsolescence occurs when newer, more functional technology replaces or supersedes an existing technology, even though an existing technology may well be in working order.Although ICHMI architectures are comprised of much of the same technology, they have not been updated nearly as often in the nuclear power industry. For example, some newer Personal Digital Assistants (PDAs) or handheld computers may, in fact, have more functionality than the 1996 computer control system at the Watts Bar I plant. This illustrates the need to transition and upgrade current nuclear power plant ICHMI technologies.

  13. Advanced gas cooled nuclear reactor materials evaluation and development program. Progress report, July 1--September 30, 1978

    Energy Technology Data Exchange (ETDEWEB)

    1978-11-24

    Results of work performed from July 1, 1978 through September 30, 1978 on the Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development Program are presented. Candidate alloys were evaluated for Very High Temperature Reactor Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the affect of simulated reactor primary coolant (Helium containing small amounts of various other gases), the high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. The activities associated with the characterization of the materials for the screening test program are reported, i.e., test specimen preparation, information from the materials characterization tests performed by General Electric, and the status of the simulated reactor helium supply system, testing equipment, and gas chemistry analysis instrumentation and equipment. The status of the data management system is presented.

  14. Early predictors of study success in a Dutch advanced nurse practitioner education program: A retrospective cohort study.

    Science.gov (United States)

    Bossema, Ercolie R; Meijs, Tineke H J M; Peters, Jeroen W B

    2017-10-01

    Study delay and attrition are major concerns in higher education. They cost time and effort, and threaten the availability of higher qualified professionals. Knowing early what factors contribute to delay and attrition may help prevent this. The aim of this study was to examine whether student characteristics, including a literature study report grade as a proxy of cognitive abilities, predicted study success in a dual advanced nurse practitioner education program. Retrospective cohort study, including all 214 students who between September 2009 and September 2015 started the two-year program at the HAN University of Applied Sciences in Nijmegen, the Netherlands. Study success was defined as having completed the program within the envisaged period. Variables examined included: age, gender, previous education (bachelor's degree or in-service training in nursing), work setting (general health, mental health, public health, or nursing home care), and literature study report grade (from 1 to 10). A hierarchical logistic regression analysis was performed. Most students were female (80%), had a bachelor's degree in nursing (67%), and were employed in a general healthcare setting (58%). Mean age was 40.5years (SD 9.4). One hundred thirty-seven students (64%) had study success. Being employed in a general healthcare setting (p≤0.004) and a higher literature study report grade (p=0.001) were associated with a higher study success rate. In advanced nurse practitioner education, study success rate seems associated with the student's cognitive abilities and work field. It might be worthwhile to identify students 'at risk of failure' before the start of the program and offer them extra support. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Advancing geriatric education: development of an interprofessional program for health care faculty.

    Science.gov (United States)

    Ford, Channing R; Brown, Cynthia J; Sawyer, Patricia; Rothrock, Angela G; Ritchie, Christine S

    2015-01-01

    To improve the health care of older adults, a faculty development program was created to enhance geriatric knowledge. The University of Alabama at Birmingham (UAB) Geriatric Education Center leadership instituted a one-year, 36-hour curriculum focusing on older adults with complex health care needs. Content areas were chosen from the Institute of Medicine Transforming Health Care Quality report and a local needs assessment. Potential preceptors were identified and participant recruitment efforts began by contacting UAB department chairs of health care disciplines. This article describes the development of the program and its implementation over three cohorts of faculty scholars (n = 41) representing 13 disciplines, from nine institutions of higher learning. Formative and summative evaluation showed program success in terms of positive faculty reports of the program, information gained, and expressed intent by each scholar to apply learned content to teaching and/or clinical practice. This article describes the initial framework and strategies guiding the development of a thriving interprofessional geriatric education program.

  16. Sustainable practice improvements: impact of the Comprehensive Advanced Palliative Care Education (CAPCE) program.

    Science.gov (United States)

    Harris, Diane; Hillier, Loretta M; Keat, Nancy

    2007-01-01

    This paper describes an education program designed to improve palliative care practice through the development of workplace hospice palliative care resources (PCRs), and its impact on knowledge transfer and longer-term changes to clinical practice. Evaluation methods included pre- and post-program questionnaires, and a survey of learners' (n=301) perceptions of program learning strategies. Interviews (n=21) were conducted with a purposeful sample of PCRs and representatives from their work sites. Ratings of the sessions indicated that they were relevant to learners' clinical practice. At follow up, the majority of learners (83%) continued to serve as PCRs. Many positive effects were identified, including enhanced pain and symptom management, staff education, and development of care policies and guidelines. Management support, particularly the prioritization of palliative care and staff development, were factors facilitating sustained implementation. These findings highlight the importance of multimodal learning strategies and supportive work environments in the development of PCRs to enhance palliative care practice.

  17. The Climate Variability & Predictability (CVP) Program at NOAA - DYNAMO Recent Project Advancements

    Science.gov (United States)

    Lucas, S. E.; Todd, J. F.; Higgins, W.

    2013-12-01

    The Climate Variability & Predictability (CVP) Program supports research aimed at providing process-level understanding of the climate system through observation, modeling, analysis, and field studies. This vital knowledge is needed to improve climate models and predictions so that scientists can better anticipate the impacts of future climate variability and change. To achieve its mission, the CVP Program supports research carried out at NOAA and other federal laboratories, NOAA Cooperative Institutes, and academic institutions. The Program also coordinates its sponsored projects with major national and international scientific bodies including the World Climate Research Programme (WCRP), the International Geosphere-Biosphere Programme (IGBP), and the U.S. Global Change Research Program (USGCRP). The CVP program sits within the Earth System Science (ESS) Division at NOAA's Climate Program Office. Dynamics of the Madden-Julian Oscillation (DYNAMO): The Indian Ocean is one of Earth's most sensitive regions because the interactions between ocean and atmosphere there have a discernable effect on global climate patterns. The tropical weather that brews in that region can move eastward along the equator and reverberate around the globe, shaping weather and climate in far-off places. The vehicle for this variability is a phenomenon called the Madden-Julian Oscillation, or MJO. The MJO, which originates over the Indian Ocean roughly every 30 to 90 days, is known to influence the Asian and Australian monsoons. It can also enhance hurricane activity in the northeast Pacific and Gulf of Mexico, trigger torrential rainfall along the west coast of North America, and affect the onset of El Niño. CVP-funded scientists participated in the DYNAMO field campaign in 2011-12. Results from this international campaign are expected to improve researcher's insights into this influential phenomenon. A better understanding of the processes governing MJO is an essential step toward

  18. Recent advances in Progeny testing program for Nili Ravi buffalo in Pakistan

    Directory of Open Access Journals (Sweden)

    A. Ghaffar

    2010-02-01

    Full Text Available Progeny testing program was started in Nili-Ravi buffalo at Livestock Production and Research Institute (LPRI, Bahadurnagar, Okara in 1979-80. Initially buffalo bulls used at Livestock Experiment Station (LES Qadirabad and Rakh Gulaman during 1964-78 were evaluated. Five out of ten at Rakh Gulaman and 10 out of 22 at Qadirabad bulls were positive. As none of these bulls were available, therefore, sons and grandsons of these bulls were selected for production of future candidate bulls. All the buffaloes at LPRI were evaluat`ed on Most Probable Producing Ability. The elite herd thus formed was used for production for future candidate bulls. Since then a continuous program is in operation at Govt. Livestock Farms and expanded to 27 field sub-centers involving private farmers in four districts Okara, Sahiwal, Faisalabad and Pakpattan. Since the initiation of this program in 1980’s, about 174 bulls have been put under progeny testing program and 137 bulls were evaluated by Daughter-Dam Comparison, out of which sixty eight buffalo bulls contributed positively in milk production of daughters. It is worth mentioning here that milk production of registered buffalo was recorded on monthly intervals in the field along with other necessary reproduction data required to compute the different traits of economic importance.Progeny testing program was started in Nili-Ravi buffalo at Livestock Production and Research Institute (LPRI, Bahadurnagar, Okara in 1979-80. Initially buffalo bulls used at Livestock Experiment Station (LES Qadirabad and Rakh Gulaman during 1964-78 were evaluated. Five out of ten at Rakh Gulaman and 10 out of 22 at Qadirabad bulls were positive. As none of these bulls were available, therefore, sons and grandsons of these bulls were selected for production of future candidate bulls. All the buffaloes at LPRI were evaluat`ed on Most Probable Producing Ability. The elite herd thus formed was used for production for future candidate bulls

  19. The Rockefeller University Navigation Program: a structured multidisciplinary protocol development and educational program to advance translational research.

    Science.gov (United States)

    Brassil, Donna; Kost, Rhonda G; Dowd, Kathleen A; Hurley, Arlene M; Rainer, Tyler-Lauren; Coller, Barry S

    2014-02-01

    The development of translational clinical research protocols is complex. To assist investigators, we developed a structured supportive guidance process (Navigation) to expedite protocol development to the standards of good clinical practice (GCP), focusing on research ethics and integrity. Navigation consists of experienced research coordinators leading investigators through a concerted multistep protocol development process from concept initiation to submission of the final protocol. To assess the effectiveness of Navigation, we collect data on the experience of investigators, the intensity of support required for protocol development, IRB review outcomes, and protocol start and completion dates. One hundred forty-four protocols underwent Navigation and achieved IRB approval since the program began in 2007, including 37 led by trainee investigators, 26 led by MDs, 9 by MD/PhDs, 57 by PhDs, and 12 by investigators with other credentials (e.g., RN, MPH). In every year, more than 50% of Navigated protocols were approved by the IRB within 30 days. For trainees who had more than one protocol navigated, the intensity of Navigation support required decreased over time. Navigation can increase access to translational studies for basic scientists, facilitate GCP training for investigators, and accelerate development and approval of protocols of high ethical and scientific quality. © 2014 Wiley Periodicals, Inc.

  20. Reduction in advanced breast cancer after introduction of a mammography screening program in Tyrol/Austria.

    Science.gov (United States)

    Oberaigner, W; Geiger-Gritsch, Sabine; Edlinger, M; Daniaux, M; Knapp, R; Hubalek, M; Siebert, U; Marth, C; Buchberger, W

    2017-06-01

    We analysed all female breast cancer (BC) cases in Tyrol/Austria regarding the shift in cancer characteristics, especially the shift in advanced BC, for the group exposed to screening as compared to the group unexposed to screening. The analysis was based on all BC cases diagnosed in women aged 40-69 years, resident in Tyrol, and diagnosed between 2009 and 2013. The data were linked to the Tyrolean mammography screening programme database to classify BC cases as "exposed to screening" or "unexposed to screening". Age-adjusted relative risks (RR) were estimated by relating the exposed to the unexposed group. In a total of about 145,000 women aged 40-69 years living in Tyrol during the study period, 1475 invasive BC cases were registered. We estimated an age-adjusted relative risk (RR) for tumour size ≥ 21 mm of 0.72 (95% confidence interval (CI) 0.60 to 0.86), for metastatic BC of 0.27 (95% CI 0.17 to 0.46) and for advanced BC of 0.83 (95% CI 0.71 to 0.96), each comparing those exposed to those unexposed to screening, respectively. In our population-based registry analysis we observed that participation in the mammography screening programme in Tyrol is associated with a 28% decrease in risk for BC cases with tumour size ≥ 21 mm and a 17% decrease in risk for advanced BC. We therefore expect the Tyrolean mammography programme to show a reduction in BC mortality. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Field Test of Advanced Duct-Sealing Technologies Within the Weatherization Assistance Program

    Energy Technology Data Exchange (ETDEWEB)

    Ternes, MP

    2001-12-05

    A field test of an aerosol-spray duct-sealing technology and a conventional, best-practice approach was performed in 80 homes to determine the efficacy and programmatic needs of the duct-sealing technologies as applied in the U.S. Department of Energy Weatherization Assistance Program. The field test was performed in five states: Iowa, Virginia, Washington, West Virginia, and Wyoming. The study found that, compared with the best-practice approach, the aerosol-spray technology is 50% more effective at sealing duct leaks and can potentially reduce labor time and costs for duct sealing by 70%, or almost 4 crew-hours. Further study to encourage and promote use of the aerosol-spray technology within the Weatherization Assistance Program is recommended. A pilot test of full production weatherization programs using the aerosol-spray technology is recommended to develop approaches for integrating this technology with other energy conservation measures and minimizing impacts on weatherization agency logistics. In order to allow or improve adoption of the aerosol spray technology within the Weatherization Assistance Program, issues must be addressed concerning equipment costs, use of the technology under franchise arrangements with Aeroseal, Inc. (the holders of an exclusive license to use this technology), software used to control the equipment, safety, and training. Application testing of the aerosol-spray technology in mobile homes is also recommended.

  2. Partnership for the Advancement of Information Literacy in a Nursing Program

    Science.gov (United States)

    Beck, Sheila; Blake-Campbell, Barbara; McKay, Devin

    2012-01-01

    Nursing educators know that healthcare stakeholders expect nursing graduates to be able to manage information. Consequently, many nursing education programs are exploring ways of integrating information literacy across the curriculum not only to bolster evidence-based practice, but also to enhance professional development and encourage lifelong…

  3. 78 FR 19691 - Applications for New Awards; Advanced Placement (AP) Test Fee Program

    Science.gov (United States)

    2013-04-02

    ... tests taken by minority (Hispanic, Black, Native American) public school students nationally; (3) The... Commonwealth of Puerto Rico, the United States Virgin Islands, Guam, American Samoa, the Commonwealth of the... discrimination in programs or activities receiving Federal financial assistance from the Department of Education...

  4. Change as a factor in advancing fire-management decisionmaking and program effectiveness

    Science.gov (United States)

    Thomas. Zimmerman

    2011-01-01

    Wildland fire management—as evidenced by its nature, historical growth, and development—can be characterized as a program of constant change. To become better able to meet changing conditions and complexity, fire management must be agile, flexible, and able to embrace change. But many challenges and limitations to acceptance continue to hamper...

  5. Proactive Strategies for Advancing Elementary School Counseling Programs: A Blueprint for the New Millennium.

    Science.gov (United States)

    Lenhardt, Marie C.; Young, Patti Ann

    2001-01-01

    Professional counselors must assume the responsibility for the continued expansion and growth of the counseling profession. Article provides counselors with practical strategies to strengthen their public image and promote more positions and programming, particularly, at the elementary level. Background information is included on public relations,…

  6. The Use of Computers in Advancing Group Technology (The National Shipbuilding Research Program)

    Science.gov (United States)

    1988-08-01

    INNOVATION MARINE INDUSTRY STANDARDS WELDING INDUSTRIAL ENGINEERING EDUCATION AND TRAINING THE NATIONAL SHIPBUILDING RESEARCH PROGRAM August 1988 NSRP 0298... customised far more easily than has been the case with traditional computer system packages. A by-product of this ease and rapidity of development allows a

  7. Online Certificate Program Moves Participants to Advanced Stages of Concern for Social Marketing

    Science.gov (United States)

    Chaudhary, Anil Kumar; Warner, Laura A.; Stofer, Kathryn A.

    2017-01-01

    Social marketing is an underused strategy that agricultural educators can employ to bring about behavior change. We designed an online certificate program for Extension professionals and other educators based on an identified need for social marketing professional development. The Concerns-Based Adoption Model (CBAM) served as the conceptual…

  8. The Rush University advanced trauma training program, a novel approach for military trauma training.

    Science.gov (United States)

    Purim-Shem-Tov, Yanina A; Ansari, Sobia N; Ward, Edward J; Carizey, Rene; Rumoro, Dino P; Bayram, Jamil D

    2013-03-01

    Nearly 90% of combat deaths occur on the battlefield before the casualty reaches a treatment facility. It has been shown that early intervention in trauma patients improves morbidity and mortality. Hence, the training of military health care providers in lifesaving measures is imperative to saving lives on the battlefield. To date, few courses exist to provide skills in combat-zone trauma stabilization and treatment. Even fewer offer training in the identification and treatment of post-traumatic stress disorders and traumatic brain injury. We set out to develop a multidisciplinary, comprehensive course to include didactic lectures as well as hands-on training and observational modules. Ten courses have been delivered to date. Thus far, feedback from military personnel and course participants has revealed the positive impact of the training program. In this manuscript, we present the layout of the program and its contents. Reprint & Copyright © 2013 Association of Military Surgeons of the U.S.

  9. A nursing workforce program to advance knowledge and skills for nurses implementing cancer clinical research.

    Science.gov (United States)

    Samborski, Cindy; Neimanis, Debbie; Paquette, Anne D; Hernandez, Lise; Klaes, Kathleen; Rudnicki, Karen

    2014-02-01

    Clinical nursing research is an emerging subspecialty that enhances nursing expertise. In an effort to provide a basic educational curriculum on cancer research and clinical trials, a major academic cancer center launched a novel program titled Clinical Research Nursing Grand Rounds that allowed nurses to receive continuing education units. The purpose of the current article is to describe the development and content of the education model, challenges encountered, and implications for oncology nursing education, practice, and research.

  10. An Analysis of Specific Cognizance Symbol Material in the Advanced Traceability and Control (ATAC) Program

    Science.gov (United States)

    1992-12-01

    100.00% 667 194 T-6: GOVERNMENT SCREENING TIMES AT THE SAN DIEGO HUB FOR 7E COG Cumuktlv Day Couna Poronld PorN .•_ 0.5 7 0.40% 0.40% 1.5 U 6.11% 6.50...PROGRAM . . - 11 1.NODEs ............ .................... .. 11 2. HUBs ............. .................... 13 3.Receiving, Screening, Processing...Packing, and Shipping at HUBs ........ .............. .. 13 III. RESEARCH METHODOLOGY ....... .............. .. 18 A.DATABASE

  11. Fiscal year 1999 multi-year work plan, advanced reactors transition program

    Energy Technology Data Exchange (ETDEWEB)

    Gantt, D.A.

    1998-09-17

    The Advanced Reactors Transition (ART) has two missions. One, funded by DOE-EM is to transition assigned, surplus facilities to a safe and compliant, low-cost stable, deactivated condition (requiring minimal surveillance and maintenance) pending eventual reuse or D and D. Facilities to be transitioned include the 309 Building/Plutonium Recycle Test Reactor (PRTR) and Nuclear Energy (NE) Legacy Facilities. The second mission, funded by DOE-NE, is to maintain the Fast Flux Test Facility (FFTF) and affiliated 400 Area buildings in a safe and compliant standby condition. The condition of the plant hardware, software and personnel is to be preserved in a manner not to preclude a plant restart.

  12. Advanced Instrumentation, Information, and Control Systems Technologies Technical Program Plan for 2014

    Energy Technology Data Exchange (ETDEWEB)

    Hallbert, Bruce [Idaho National Lab. (INL), Idaho Falls, ID (United States); Thomas, Ken [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-07-01

    The Advanced Instrumentation, Information, and Control (II&C) Systems Technologies Pathway conducts targeted research and development (R&D) to address aging and reliability concerns with the legacy instrumentation and control and related information systems of the U.S. operating light water reactor (LWR) fleet. This work involves two major goals: (1) to ensure that legacy analog II&C systems are not life-limiting issues for the LWR fleet, and (2) to implement digital II&C technology in a manner that enables broad innovation and business improvement in the nuclear power plant operating model. Resolving long-term operational concerns with the II&C systems contributes to the long-term sustainability of the LWR fleet, which is vital to the nation's energy and environmental security.

  13. Effects of the Advanced Innovative Internet-Based Communication Education Program on Promoting Communication Between Nurses and Patients With Dementia.

    Science.gov (United States)

    Chao, Hui-Chen; Kaas, Merrie; Su, Ying-Hwa; Lin, Mei-Feng; Huang, Mei-Chih; Wang, Jing-Jy

    2016-06-01

    Effective communication between nurses and patients with dementia promotes the quality of patient care by improving the identification of patient needs and by reducing the miscommunication-related frustration of patients and nurses. This study evaluates the effects of an advanced innovative Internet-based communication education (AIICE) program on nurses' communication knowledge, attitudes, frequency of assessing patient communication capacity, and communication performance in the context of care for patients with dementia. In addition, this study attempts to evaluate the indirect effects of this program on outcomes for patients with dementia, including memory and behavior-related problems and depressive symptoms. A quasi-experimental research design with a one-group repeated measure was conducted. Convenience sampling was used to recruit nurses from long-term care facilities in southern Taiwan. Data were analyzed using general estimating equations to compare changes over time across three points: baseline, fourth-week posttest, and 16th-week posttest. One hundred five nurses completed the AIICE program and the posttest surveys. The findings indicate that nurses' communication knowledge, frequency in assessing patients' communication capacity, and communication performance had improved significantly over the baseline by either the 4th- or 16th-week posttest (p communication attitude showed no significant improvement in the posttest survey (p = .40). Furthermore, the findings indicate that the memory and behavior-related problems and the depressive symptoms of patients had decreased significantly by the 16th-week posttest (p = .05). This study showed that the AIICE program improves nurses' communication knowledge, frequency to assess patients' communication capacity, and communication performance and alleviates the memory and behavior-related problems and depressive symptoms of patients. The continuous communication training of nurses using the AIICE program is thus

  14. Advancing understanding of the sustainability of lay health advisor (LHA) programs for African-American women in community settings.

    Science.gov (United States)

    Shelton, Rachel C; Charles, Thana-Ashley; Dunston, Sheba King; Jandorf, Lina; Erwin, Deborah O

    2017-09-01

    Lay health advisor (LHA) programs have made strong contributions towards the elimination of health disparities and are increasingly being implemented to promote health and prevent disease. Developed in collaboration with African-American survivors, the National Witness Project (NWP) is an evidence-based, community-led LHA program that improves cancer screening among African-American women. NWP has been successfully disseminated, replicated, and implemented nationally in over 40 sites in 22 states in diverse community settings, reaching over 15,000 women annually. We sought to advance understanding of barriers and facilitators to the long-term implementation and sustainability of LHA programs in community settings from the viewpoint of the LHAs, as well as the broader impact of the program on African-American communities and LHAs. In the context of a mixed-methods study, in-depth telephone interviews were conducted among 76 African-American LHAs at eight NWP sites at baseline and 12-18 months later, between 2010 and 2013. Qualitative data provides insight into inner and outer contextual factors (e.g., community partnerships, site leadership, funding), implementation processes (e.g., training), as well as characteristics of the intervention (e.g., perceived need and fit in African-American community) and LHAs (e.g., motivations, burnout) that are perceived to impact the continued implementation and sustainability of NWP. Factors at the contextual levels and related to motivations of LHAs are critical to the sustainability of LHA programs. We discuss how findings are used to inform (1) the development of the LHA Sustainability Framework and (2) strategies to support the continued implementation and sustainability of evidence-based LHA interventions in community settings.

  15. Nuclear proliferation and civilian nuclear power: report of the Nonproliferation Alternative Systems Assessment Program. Volume VIII. Advanced concepts

    Energy Technology Data Exchange (ETDEWEB)

    1979-12-01

    The six advanced concepts for nuclear power systems that were selected for evaluation are: the fast mixed-spectrum reactor; the denatured molten-salt reactor; the mixed-flow gaseous-core reactor; the linear-accelerator fuel-regenerator reactor; the ternary metal-fueled electronuclear fuel-producer reactor; and the tokamak fusion-fission hybrid reactor. The design assessment was performed by identifying needs in six specific areas: conceptual plant design; reactor-physics considerations; fuel cycle alternatives; mechanical and thermal-hydraulic considerations; selection, development, and availability of materials; and engineering and operability. While none of the six concepts appears to be a credible commercial alternative to the liquid-metal fast-breeder within the Nonproliferation Alternative Systems Assessment Program horizon of 2025, there are a number of reasons for continued interest in the fast mixed-spectrum reactor: it is a once-through cycle fast reactor with proliferation risk characteristics similar to those of the light-water reactor; only about one-third as much uranium is required as for the once-through light-water reactor; the system will benefit directly from fast-breeder development programs; and, finally, the research and development required to develop the high-burnup metal fuel could benefit the on-going liquid-metal fast-breeder reactor program. Accordingly, a limited research and development effort on the high-burnup fuel seems justified, at present.

  16. Innovative partnerships to advance public health training in community-based academic residency programs

    Directory of Open Access Journals (Sweden)

    Lo JC

    2017-10-01

    Full Text Available Joan C Lo,1–3 Thomas E Baudendistel,2,3 Abhay Dandekar,3,4 Phuoc V Le,5 Stanton Siu,2,3 Bruce Blumberg6 1Division of Research, Kaiser Permanente Northern California, Oakland, CA, USA; 2Department of Medicine, Kaiser Permanente Oakland Medical Center, Oakland, CA, USA; 3Graduate Medical Education, Kaiser Permanente East Bay, Oakland, CA, USA; 4Department of Pediatrics, Kaiser Permanente Oakland Medical Center, Oakland, CA, USA; 5School of Public Health, University of California Berkeley, Berkeley, CA, USA; 6Graduate Medical Education, Kaiser Permanente Northern California, Oakland, CA, USA Abstract: Collaborative partnerships between community-based academic residency ­training programs and schools of public health, represent an innovative approach to training future physician leaders in population management and public health. In Kaiser Permanente Northern California, development of residency-Masters in Public Health (MPH tracks in the Internal Medicine Residency and the Pediatrics Residency programs, with MPH graduate studies completed at the University of California Berkeley School of Public Health, enables physicians to integrate clinical training with formal education in epidemiology, biostatistics, health policy, and disease prevention. These residency-MPH programs draw on more than 50 years of clinical education, public health training, and health services research – creating an environment that sparks inquiry and added value by developing skills in patient-centered care through the lens of population-based outcomes. Keywords: graduate medical education, public health, master’s degree, internal medicine, pediatrics, residency training

  17. Advance Planning, Programming and Production Control as key Activities Now the Environmental Education

    Directory of Open Access Journals (Sweden)

    Geraldo Cardoso de Oliveira Neto

    2015-06-01

    Full Text Available This work addresses the evolution of Planning, Programming and Control of Production (PPCP as essential activities of the company towards the insertion of environmental education. The approach is based on an exploratory research and a critical bibliographic revision. Two main objectives were established: i a new way of production organization, by considering cleaner production from company utilities to production capacity, technology and outsourcing and ii infrastructure changes related to market attendance and environmental education dissemination. Needs that arise can be grouped as follows: utilities adequacy, cleaner technologies and ecochains implementation; instruction and dissemination of environmental education; and necessity of the adoption of new paradigms.

  18. Materials technology for an advanced space power nuclear reactor concept: Program summary

    Science.gov (United States)

    Gluyas, R. E.; Watson, G. K.

    1975-01-01

    The results of a materials technology program for a long-life (50,000 hr), high-temperature (950 C coolant outlet), lithium-cooled, nuclear space power reactor concept are reviewed and discussed. Fabrication methods and compatibility and property data were developed for candidate materials for fuel pins and, to a lesser extent, for potential control systems, reflectors, reactor vessel and piping, and other reactor structural materials. The effects of selected materials variables on fuel pin irradiation performance were determined. The most promising materials for fuel pins were found to be 85 percent dense uranium mononitride (UN) fuel clad with tungsten-lined T-111 (Ta-8W-2Hf).

  19. Telomere length and fetal programming: A review of recent scientific advances.

    Science.gov (United States)

    Whiteman, Valerie E; Goswami, Anjali; Salihu, Hamisu M

    2017-05-01

    We sought to synthesize a comprehensive literature review comprising recent research linking fetal programming to fetal telomere length. We also explored the potential effects fetal telomere length shortening has on fetal phenotypes. Utilizing the PubMed database as our primary search engine, we retrieved and reviewed 165 articles of published research. The inclusion criteria limited the articles to those that appeared within the last ten years, were pertinent to humans, and without restriction to language of publication. Our results showed that socio-demographic factors like age, sex, genetic inheritance, and acquired disease impact telomere length. Further, we found several maternal characteristics to be associated with fetal telomere length shortening, and these include maternal chemical exposure (eg, tobacco smoke), maternal stress during pregnancy, maternal nutritional and sleeping disorders during pregnancy as well as maternal disease status. Due to paucity of data, our review could not synthesize evidence directly linking fetal phenotypes to telomere length shortening. Although the research summarized in this review shows some association between determinants of intrauterine programming and fetal telomere length, there is still significant work that needs to be done to delineate the direct relationship of telomere attrition with specific fetal phenotypes. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  20. [A review on the advancement of internet-based public health surveillance program].

    Science.gov (United States)

    Zhao, Y Q; Ma, W J

    2017-02-10

    Internet data is introduced into public health arena under the features of fast updating and tremendous volume. Mining and analyzing internet data, researchers can model the internet-based surveillance system to assess the distribution of health-related events. There are two main types of internet-based surveillance systems, i.e. active and passive, which are distinguished by the sources of information. Through passive surveillance system, information is collected from search engine and social media while the active system gathers information through provision of the volunteers. Except for serving as a real-time and convenient complementary approach to traditional disease, food safety and adverse drug reaction surveillance program, Internet-based surveillance system can also play a role in health-related behavior surveillance and policy evaluation. Although several techniques have been applied to filter information, the accuracy of internet-based surveillance system is still bothered by the false positive information. In this article, we have summarized the development and application of internet-based surveillance system in public health to provide reference for a better surveillance program in China.

  1. Organic Tanks Safety Program: Advanced organic analysis FY 1996 progress report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    Major focus during the first part of FY96 was to evaluate using organic functional group concentrations to screen for energetics. Fourier transform infrared and Raman spectroscopy would be useful screening tools for determining C-H and COO- organic content in tank wastes analyzed in a hot cell. These techniques would be used for identifying tanks of potential safety concern that may require further analysis. Samples from Tanks 241-C-106 and -C-204 were analyzed; the major organic in C-106 was B2EHPA and in C-204 was TBP. Analyses of simulated wastes were also performed for the Waste Aging Studies Task; organics formed as a result of degradation were identified, and the original starting components were monitored quantitatively. Sample analysis is not routine and required considerable methods adaptation and optimization. Several techniques have been evaluated for directly analyzing chelator and chelator fragments in tank wastes: matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and liquid chromatography with ultraviolet detection using Cu complexation. Although not directly funded by the Tanks Safety Program, the success of these techniques have implications for both the Flammable Gas and Organic Tanks Safety Programs.

  2. [Advances in early childhood development: from neurons to big scale programs].

    Science.gov (United States)

    Pérez-Escamilla, Rafael; Rizzoli-Córdoba, Antonio; Alonso-Cuevas, Aranzazú; Reyes-Morales, Hortensia

    Early childhood development (ECD) is the basis of countries' economic and social development and their ability to meet the Sustainable Development Goals (SDGs). Gestation and the first three years of life are critical for children to have adequate physical, psychosocial, emotional and cognitive development for the rest of their lives. Nurturing care and protection of children during gestation and early childhood are necessary for the development of trillions of neurons and trillions of synapses necessary for development. ECD requires access to good nutrition and health services from gestation, responsive caregiving according to the child's developmental stage, social protection and child welfare, and early stimulation and learning opportunities. Six actions are recommended to improve national ECD programs: expand political will and funding; create a supportive, evidence-based policy environment; build capacity through inter-sectoral coordination; ensure fair and transparent governance of programs and services; increase support for multidisciplinary research; and promote the development of leaders. Mexico has made significant progress under the leadership of the Health Ministry, but still faces significant challenges. The recent creation of a national inter-sectoral framework to enable ECD with support of international organizations and the participation of civil society organizations can help overcome these challenges. Copyright © 2017 Hospital Infantil de México Federico Gómez. Publicado por Masson Doyma México S.A. All rights reserved.

  3. Review of the cultivation program within the National Alliance for Advanced Biofuels and Bioproducts

    Energy Technology Data Exchange (ETDEWEB)

    Lammers, Peter; Huesemann, Michael H.; Boeing, Wiebke; Anderson, Daniel B.; Arnold, Robert G.; Bai, Xuemi; Bhole, Manish; Brhanavan, Yalini; Brown, Louis; Brown, Jola; Brown, Judith K.; Chisholm, Stephen; Downes, Cara M.; Fulbright, Scott; Ge, Yanfeng; Holladay, Johnathan E.; Ketheesan, Balachandran; Khopkar, Avinash; Koushik, Ambica; Laur, Paul; Marrone, Babetta L.; Mott, John B.; Nirmalakhandan, Nagamany; Ogden, Kimberly L.; Parsons, R. W.; Polle, Juergen E.; Ryan, Randy; Samocha, Tzachi; Sayre, Richard T.; Seger, Mark J.; Selvaratnam, Thinesh; Sui, Ruixiu; Thomasson, Alex; Unc, Adrian; Van Voorhies, Wayne; Waller, Peter M.; Yao, Yao; Olivares, José A.

    2017-03-02

    The cultivation effortswithin the National Alliance for Advanced Biofuels and Bioproducts (NAABB)were developed to provide four major goals for the consortium, which included biomass production for downstream experimentation, development of new assessment tools for cultivation, development of newcultivation reactor technologies, and development ofmethods for robust cultivation. The NAABB consortiumtestbeds produced over 1500 kg of biomass for downstream processing. The biomass production included a number of model production strains, but also took into production some of themore promising strains found through the prospecting efforts of the consortium. Cultivation efforts at large scale are intensive and costly, therefore the consortium developed tools and models to assess the productivity of strains under various environmental conditions, at lab scale, and validated these against scaled outdoor production systems. Two new pond-based bioreactor designs were tested for their ability to minimize energy consumption while maintaining, and even exceeding, the productivity of algae cultivation compared to traditional systems. Also, molecular markers were developed for quality control and to facilitate detection of bacterial communities associated with cultivated algal species, including the Chlorella spp. pathogen, Vampirovibrio chlorellavorus,which was identified in at least two test site locations in Arizona and New Mexico. Finally, the consortiumworked on understandingmethods to utilize compromisedmunicipalwastewater streams for cultivation. This review provides an overview of the cultivationmethods and tools developed by the NAABB consortium to produce algae biomass, in robust low energy systems, for biofuel production.

  4. Advances and challenges in oral health after a decade of the "Smiling Brazil" Program.

    Science.gov (United States)

    Scherer, Charleni Inês; Scherer, Magda Duarte dos Anjos

    2015-01-01

    To analyze oral health work changes in primary health care after Brazil's National Oral Health Policy Guidelines were released. A literature review was conducted on Medline, LILACS, Embase, SciELO, Biblioteca Virtual em Saúde, and The Cochrane Library databases, from 2000 to 2013, on elements to analyze work changes. The descriptors used included: primary health care, family health care, work, health care policy, oral health care services, dentistry, oral health, and Brazil. Thirty-two studies were selected and analyzed, with a predominance of qualitative studies from the Northeast region with workers, especially dentists, focusing on completeness and quality of care. Observed advances focused on educational and permanent education actions; on welcoming, bonding, and accountability. The main challenges were related to completeness; extension and improvement of care; integrated teamwork; working conditions; planning, monitoring, and evaluation of actions; stimulating people's participation and social control; and intersectorial actions. Despite the new regulatory environment, there are very few changes in oral health work. Professionals tend to reproduce the dominant biomedical model. Continuing efforts will be required in work management, training, and permanent education fields. Among the possibilities are the increased engagement of managers and professionals in a process to understand work dynamics and training in the perspective of building significant changes for local realities.

  5. Advances and challenges in oral health after a decade of the “Smiling Brazil” Program

    Directory of Open Access Journals (Sweden)

    Charleni Inês Scherer

    2015-01-01

    Full Text Available ABSTRACT OBJECTIVE To analyze oral health work changes in primary health care after Brazil’s National Oral Health Policy Guidelines were released. METHODS A literature review was conducted on Medline, LILACS, Embase, SciELO, Biblioteca Virtual em Saúde, and The Cochrane Library databases, from 2000 to 2013, on elements to analyze work changes. The descriptors used included: primary health care, family health care, work, health care policy, oral health care services, dentistry, oral health, and Brazil. Thirty-two studies were selected and analyzed, with a predominance of qualitative studies from the Northeast region with workers, especially dentists, focusing on completeness and quality of care. RESULTS Observed advances focused on educational and permanent education actions; on welcoming, bonding, and accountability. The main challenges were related to completeness; extension and improvement of care; integrated teamwork; working conditions; planning, monitoring, and evaluation of actions; stimulating people’s participation and social control; and intersectorial actions. CONCLUSIONS Despite the new regulatory environment, there are very few changes in oral health work. Professionals tend to reproduce the dominant biomedical model. Continuing efforts will be required in work management, training, and permanent education fields. Among the possibilities are the increased engagement of managers and professionals in a process to understand work dynamics and training in the perspective of building significant changes for local realities.

  6. The accumulated experience of the Israeli Advanced Trauma Life Support program.

    Science.gov (United States)

    Blumenfeld, A; Ben Abraham, R; Stein, M; Shapira, S C; Reiner, A; Reiser, B; Rivkind, A; Shemer, J

    1997-07-01

    Between January 1990 and May 1995 one faculty in Israel taught Advanced Trauma Life Support (ATLS) courses to 3,700 physicians. Two types of courses were given to three subpopulations. We studied the influence of demographic variables on students' achievements in the course and compared students' achievements as a function of their course type. This study was conducted as a concurrent longitudinal study. Achievements of 3,700 students were analyzed. The precourse grade, type of course, and their interaction were found to have a significant effect on the postcourse grades. Physicians practicing surgical subspecialties, in general, did better, as did students educated in English-speaking countries. Students who took part in the Combat Trauma Life Support (CTLS) course, which included the entire ATLS course and additional lectures and exercises, also ended with better scores. Physician's country of origin and clinical subspecialty have a significant effect on the cognitive achievement in the ATLS course provided in Israel. An expanded ATLS course (CTLS), to include additional military trauma topics as well as additional skill station training, can improve the results of the postcourse grades.

  7. Advances and challenges in oral health after a decade of the “Smiling Brazil” Program

    Science.gov (United States)

    Scherer, Charleni Inês; Scherer, Magda Duarte dos Anjos

    2016-01-01

    ABSTRACT OBJECTIVE To analyze oral health work changes in primary health care after Brazil’s National Oral Health Policy Guidelines were released. METHODS A literature review was conducted on Medline, LILACS, Embase, SciELO, Biblioteca Virtual em Saúde, and The Cochrane Library databases, from 2000 to 2013, on elements to analyze work changes. The descriptors used included: primary health care, family health care, work, health care policy, oral health care services, dentistry, oral health, and Brazil. Thirty-two studies were selected and analyzed, with a predominance of qualitative studies from the Northeast region with workers, especially dentists, focusing on completeness and quality of care. RESULTS Observed advances focused on educational and permanent education actions; on welcoming, bonding, and accountability. The main challenges were related to completeness; extension and improvement of care; integrated teamwork; working conditions; planning, monitoring, and evaluation of actions; stimulating people’s participation and social control; and intersectorial actions. CONCLUSIONS Despite the new regulatory environment, there are very few changes in oral health work. Professionals tend to reproduce the dominant biomedical model. Continuing efforts will be required in work management, training, and permanent education fields. Among the possibilities are the increased engagement of managers and professionals in a process to understand work dynamics and training in the perspective of building significant changes for local realities. PMID:26815162

  8. Master’s programs in advanced nursing practice: new strategies to enhance course design for subspecialty training in neonatology and pediatrics

    Directory of Open Access Journals (Sweden)

    Morgan C

    2012-12-01

    Full Text Available Colin Morgan,1,2 Catherine Barry,1,2 Katie Barnes2,31Liverpool Women’s Hospital, Crown Street, Liverpool, UK; 2Liverpool John Moores University, Liverpool, UK; 3Liverpool Community Health, Liverpool, UKAbstract: The advanced nurse practitioner (ANP role first developed in the USA in the 1960s in primary care. Since then, it has evolved in many different countries and subspecialties, creating a variety of challenges for those designing and implementing master’s programs for this valuable professional group. We focus on ANPs in the neonatal and pediatric intensive care setting to illustrate the complexity of issues faced by both faculty and students in such a program. We review the impact of limited resources, faculty recruitment/accreditation, and the relationship with the medical profession in establishing a curriculum. We explore the evidence for the importance of ANP role definition, supervision, and identity among other health professionals to secure a successful role transition. We describe how recent advances in technology can be used to innovate with new styles of teaching and learning to overcome some of the difficulties in running master’s programs for small subspecialties. We illustrate, through our own experience, how a thorough assessment of the available literature can be used to innovate and develop strategies to create an individual MSc programs that are designed to meet the needs of highly specialized advanced neonatal and pediatric nursing practice.Keywords: master’s program, advanced nurse practitioner, advanced practice, neonatal, pediatric, intensive care

  9. Advanced practice nurses and program evaluation: can solicitation of an e-mail address lead to longitudinal selection bias?

    Science.gov (United States)

    Dickerson, Justin B; Smith, Matthew Lee; McKinley, Ashley; Ory, Marcia G

    2012-06-01

    To identify if survey respondents providing an e-mail address for program evaluation represent a risk of longitudinal selection bias. A survey was administered to advanced practice nurses after a chronic disease self-management presentation. Chi-square statistics and logistic regression were used to identify variables associated with successful solicitation of an e-mail address. Relative to those 'not at all likely' to suggest someone in their practice train to become a certified chronic disease self-management facilitator, those stating they were 'very likely' or 'quite likely' to take this action were 10.20 and 13.60 times more likely, respectively, to provide an e-mail address. These differences were statistically significant (OR = 10.20, CI = 2.91-35.77, p e-mail address could pose a risk of selection bias when developing a longitudinal sample for further analysis.

  10. Advanced energy design and operation technologies research: Recommendations for a US Department of Energy multiyear program plan

    Energy Technology Data Exchange (ETDEWEB)

    Brambley, M.R.; Crawley, D.B.; Hostetler, D.D.; Stratton, R.C.; Addision, M.S.; Deringer, J.J.; Hall, J.D.; Selkowitz, S.E.

    1988-12-01

    This document describes recommendations for a multiyear plan developed for the US Department of Energy (DOE) as part of the Advanced Energy Design and Operation Technologies (AEDOT) project. The plan is an outgrowth of earlier planning activities conducted for DOE as part of design process research under the Building System Integration Program (BSIP). The proposed research will produce intelligent computer-based design and operation technologies for commercial buildings. In this document, the concept is explained, the need for these new computer-based environments is discussed, the benefits are described, and a plan for developing the AEDOT technologies is presented for the 9-year period beginning FY 1989. 45 refs., 37 figs., 9 tabs.

  11. Development of Proof-of-Concept Units for the Advanced Medium-Sized Mobile Power Sources (AMMPS) Program

    Energy Technology Data Exchange (ETDEWEB)

    Andriulli, JB

    2002-04-03

    The purpose of this report is to document the development of the proof-of-concept units within the Advanced Medium-sized Mobile Power Sources (AMMPS) program. The design used a small, lightweight diesel engine, a permanent magnet alternator, power electronics and digital controls as outlined in the philosophy detailed previously. One small proof-of-concept unit was completed and delivered to the military. The unit functioned well but was not optimized at the time of delivery to the military. A tremendous amount of experience was gained during this phase that can be used in the development of any follow-on AMMPS production systems. Lessons learned and recommendations for follow-on specifications are provided. The unit demonstrated that significant benefits are possible with the new design philosophy. Trade-offs will have to be made but many of the advantages appear to be within the technical grasp of the market.

  12. Advanced industrial gas turbine technology readiness demonstration program. Phase II. Final report: compressor rig fabrication assembly and test

    Energy Technology Data Exchange (ETDEWEB)

    Schweitzer, J. K.; Smith, J. D.

    1981-03-01

    The results of a component technology demonstration program to fabricate, assemble and test an advanced axial/centrifugal compressor are presented. This work was conducted to demonstrate the utilization of advanced aircraft gas turbine cooling and high pressure compressor technology to improve the performance and reliability of future industrial gas turbines. Specific objectives of the compressor component testing were to demonstrate 18:1 pressure ratio on a single spool at 90% polytropic efficiency with 80% fewer airfoils as compared to current industrial gas turbine compressors. The compressor design configuration utilizes low aspect ratio/highly-loaded axial compressor blading combined with a centrifugal backend stage to achieve the 18:1 design pressure ratio in only 7 stages and 281 axial compressor airfoils. Initial testing of the compressor test rig was conducted with a vaneless centrifugal stage diffuser to allow documentation of the axial compressor performance. Peak design speed axial compressor performance demonstrated was 91.8% polytropic efficiency at 6.5:1 pressure ratio. Subsequent documentation of the combined axial/centrifugal performance with a centrifugal stage pipe diffuser resulted in the demonstration of 91.5% polytropic efficiency and 14% stall margin at the 18:1 overall compressor design pressure ratio. The demonstrated performance not only exceeded the contract performance goals, but also represents the highest known demonstrated compressor performance in this pressure ratio and flow class. The performance demonstrated is particularly significant in that it was accomplished at airfoil loading levels approximately 15% higher than that of current production engine compressor designs. The test results provide conclusive verification of the advanced low aspect ratio axial compressor and centrifugal stage technologies utilized.

  13. Parent Engagement in Youth Drug Prevention in Chinese Families: Advancement in Program Development and Evaluation

    Directory of Open Access Journals (Sweden)

    Sandra K. M. Tsang

    2011-01-01

    Full Text Available The escalating youth drug abuse problem in Hong Kong has attracted intense attention from the government, schools, and youth service professionals. Most preventive efforts have focused directly on positive youth development, very often through school programs delivered to secondary school students. There have been limited efforts to engage parents even though it is obvious that the family is actually the primary context of children and youth development. This paper will assert the importance of parental engagement in youth drug-prevention work, discuss some barriers in such parental involvement, present some promising local attempts and their strengths and limitations, and propose that sustained efforts are needed to build up theory-driven and evidence-based resources for Chinese communities on the subject.

  14. Astronomy for a Better World: IAU OAD Task Force-1 Programs for Advancing Astronomy Education and Research in Universities in Developing Countries

    Science.gov (United States)

    Guinan, Edward; Kolenberg, Katrien

    2015-03-01

    We discuss the IAU Commission 46 and Office for Astronomy Development (OAD) programs that support advancing Astronomy education and research primarily in universities in developing countries. The bulk of these operational activities will be coordinated through the OAD's newly installed Task Force 1. We outline current (and future) IAU/OAD Task Force-1 programs that promote the development of University-level Astronomy at both undergraduate and graduate levels. Among current programs discussed are the past and future expanded activities of the International School for Young Astronomers (ISYA) and the Teaching Astronomy for Development (TAD) programs. The primary role of the ISYA program is the organization of a three week School for students for typically M.Sc. and Ph.D students. The ISYA is a very successful program that will now be offered more frequently through the generous support of the Kavli Foundation. The IAU/TAD program provides aid and resources for the development of teaching, education and research in Astronomy. The TAD program is dedicated to assist countries that have little or no astronomical activity, but that wish to develop or enhance Astronomy education. Over the last ten years, the ISYA and TAD programs have supported programs in Africa, Asia, Central America and the Caribbean, the Middle East, South East and West Asia, and South America. Several examples are given. Several new programs being considered by OAD Task Force-1 are also discussed. Other possible programs being considered are the introduction of modular Astronomy courses into the university curricula (or improve present courses) as well as providing access to ``remote learning`` courses and Virtual Astronomy labs in developing countries. Another possible new program would support visits of astronomers from technically advanced countries to spend their sabbatical leaves teaching and advising University Astronomy programs in developing countries. Suggestions for new Task Force -1

  15. (Pittsburgh Energy Technology Center): Quarterly technical progress report for the period ending June 30, 1987. [Advanced Coal Research and Technology Development Programs

    Energy Technology Data Exchange (ETDEWEB)

    None

    1988-02-01

    Research programs on coal and coal liquefaction are presented. Topics discussed are: coal science, combustion, kinetics, surface science; advanced technology projects in liquefaction; two stage liquefaction and direct liquefaction; catalysts of liquefaction; Fischer-Tropsch synthesis and thermodynamics; alternative fuels utilization; coal preparation; biodegradation; advanced combustion technology; flue gas cleanup; environmental coordination, and technology transfer. Individual projects are processed separately for the data base. (CBS)

  16. Status of the Morgantown Energy Technology Center`s Particulate Cleanup Program -- enabling technology for advanced coal-based power systems

    Energy Technology Data Exchange (ETDEWEB)

    Dennis, R.A.

    1994-10-01

    Advanced coal-based power systems, such as integrated gasification and pressurized fluidized-bed combustion, require particulate removal at high temperatures and high pressure under adverse chemical conditions. To facilitate the development of advanced coal-based power systems, then Morgantown Energy Technology Center (METC) has assembled a Particulate Cleanup Program, which conducts technology demonstration projects and applied research to address the adverse filtration conditions and filter system issues, as well as the future performance demands of these systems.

  17. Cervical cancer screening in adolescents: an evidence-based internet education program for practice improvement among advanced practice nurses.

    Science.gov (United States)

    Choma, Kim; McKeever, Amy E

    2015-02-01

    The literature reports great variation in the knowledge levels and application of the recent changes of cervical cancer screening guidelines into clinical practice. Evidence-based screening guidelines for the prevention and early detection of cervical cancer offers healthcare providers the opportunity to improve practice patterns among female adolescents by decreasing psychological distress as well as reducing healthcare costs and morbidities associated with over-screening. The purpose of this pilot intervention study was to determine the effects of a Web-based continuing education unit (CEU) program on advanced practice nurses' (APNs) knowledge of current cervical cancer screening evidence-based recommendations and their application in practice. This paper presents a process improvement project as an example of a way to disseminate updated evidence-based practice guidelines among busy healthcare providers. This Web-based CEU program was developed, piloted, and evaluated specifically for APNs. The program addressed their knowledge level of cervical cancer and its relationship with high-risk human papillomavirus. It also addressed the new cervical cancer screening guidelines and the application of those guidelines into clinical practice. Results of the study indicated that knowledge gaps exist among APNs about cervical cancer screening in adolescents. However, when provided with a CEU educational intervention, APNs' knowledge levels increased and their self-reported clinical practice behaviors changed in accordance with the new cervical cancer screening guidelines. Providing convenient and readily accessible up-to-date electronic content that provides CEU enhances the adoption of clinical practice guidelines, thereby decreasing the potential of the morbidities associated with over-screening for cervical cancer in adolescents and young women. © 2014 Sigma Theta Tau International.

  18. Modeling, Simulation and Analysis of Complex Networked Systems: A Program Plan for DOE Office of Advanced Scientific Computing Research

    Energy Technology Data Exchange (ETDEWEB)

    Brown, D L

    2009-05-01

    Many complex systems of importance to the U.S. Department of Energy consist of networks of discrete components. Examples are cyber networks, such as the internet and local area networks over which nearly all DOE scientific, technical and administrative data must travel, the electric power grid, social networks whose behavior can drive energy demand, and biological networks such as genetic regulatory networks and metabolic networks. In spite of the importance of these complex networked systems to all aspects of DOE's operations, the scientific basis for understanding these systems lags seriously behind the strong foundations that exist for the 'physically-based' systems usually associated with DOE research programs that focus on such areas as climate modeling, fusion energy, high-energy and nuclear physics, nano-science, combustion, and astrophysics. DOE has a clear opportunity to develop a similarly strong scientific basis for understanding the structure and dynamics of networked systems by supporting a strong basic research program in this area. Such knowledge will provide a broad basis for, e.g., understanding and quantifying the efficacy of new security approaches for computer networks, improving the design of computer or communication networks to be more robust against failures or attacks, detecting potential catastrophic failure on the power grid and preventing or mitigating its effects, understanding how populations will respond to the availability of new energy sources or changes in energy policy, and detecting subtle vulnerabilities in large software systems to intentional attack. This white paper outlines plans for an aggressive new research program designed to accelerate the advancement of the scientific basis for complex networked systems of importance to the DOE. It will focus principally on four research areas: (1) understanding network structure, (2) understanding network dynamics, (3) predictive modeling and simulation for complex

  19. Computer programs for capital cost estimation, lifetime economic performance simulation, and computation of cost indexes for laser fusion and other advanced technology facilities

    Energy Technology Data Exchange (ETDEWEB)

    Pendergrass, J.H.

    1978-01-01

    Three FORTRAN programs, CAPITAL, VENTURE, and INDEXER, have been developed to automate computations used in assessing the economic viability of proposed or conceptual laser fusion and other advanced-technology facilities, as well as conventional projects. The types of calculations performed by these programs are, respectively, capital cost estimation, lifetime economic performance simulation, and computation of cost indexes. The codes permit these three topics to be addressed with considerable sophistication commensurate with user requirements and available data.

  20. TRAC-P1: an advanced best estimate computer program for PWR LOCA analysis. I. Methods, models, user information, and programming details

    Energy Technology Data Exchange (ETDEWEB)

    1978-05-01

    The Transient Reactor Analysis Code (TRAC) is being developed at the Los Alamos Scientific Laboratory (LASL) to provide an advanced ''best estimate'' predictive capability for the analysis of postulated accidents in light water reactors (LWRs). TRAC-Pl provides this analysis capability for pressurized water reactors (PWRs) and for a wide variety of thermal-hydraulic experimental facilities. It features a three-dimensional treatment of the pressure vessel and associated internals; two-phase nonequilibrium hydrodynamics models; flow-regime-dependent constitutive equation treatment; reflood tracking capability for both bottom flood and falling film quench fronts; and consistent treatment of entire accident sequences including the generation of consistent initial conditions. The TRAC-Pl User's Manual is composed of two separate volumes. Volume I gives a description of the thermal-hydraulic models and numerical solution methods used in the code. Detailed programming and user information is also provided. Volume II presents the results of the developmental verification calculations.

  1. Breeding Value of Cocoa (Theobroma cacao L. for Pod and Bean Traits: A Consequential Advance in Nigerian Cocoa Breeding Program

    Directory of Open Access Journals (Sweden)

    Daniel Babasola ADEWALE

    2014-06-01

    Full Text Available The understanding of the generated hybrids’ breeding value gives a measure of probable advances in a breeding program. Four cocoa genotypes (testers were crossed with two distinct lines (T65/7 and T86/2. The parents and the hybrids were separately established in randomized complete block design with six replications. The fourteen genotypes were evaluated for pod length (PL, weight (PW, beans/pod (NoB, bean length (BL, width (Bwi and thickness (BT. The treatment, parent, crosses and Line x Tester sources of variation were significant (P ≤ 0.05. Hybrids from the same maternal parent differed significantly (P < 0.05 for the six traits. Contribution to the total variance of PL, PW and Bwi were in the following order: Tester > Line x Tester > Lines. The highest general combining ability (0.42 occurred in T65/7 for PW; the least (-0.081 occurred in T86/2 for PL. Cross combination T65/7xT57/22 produced the highest specific ability of combination (4.33 for NoB. Variance of GCA and SCA were significant (P < 0.05 for the six traits. The GCA/SCA ratios revealed the inheritance of PL, PW, Bwi and BT to be additive. Non-additive gene effect controlled NoB and BL. Heterosis for the six traits ranged between -17.82% for BT (T65/7xT57/22 to 52.40% for PW (T65/7xT53/8. Increased productivity in cocoa is possible through hybrid breeding programs.

  2. Technology Development Program for an Advanced Potassium Rankine Power Conversion System Compatible with Several Space Reactor Designs

    Energy Technology Data Exchange (ETDEWEB)

    Yoder, G.L.

    2005-10-03

    This report documents the work performed during the first phase of the National Aeronautics and Space Administration (NASA), National Research Announcement (NRA) Technology Development Program for an Advanced Potassium Rankine Power Conversion System Compatible with Several Space Reactor Designs. The document includes an optimization of both 100-kW{sub e} and 250-kW{sub e} (at the propulsion unit) Rankine cycle power conversion systems. In order to perform the mass optimization of these systems, several parametric evaluations of different design options were investigated. These options included feed and reheat, vapor superheat levels entering the turbine, three different material types, and multiple heat rejection system designs. The overall masses of these Nb-1%Zr systems are approximately 3100 kg and 6300 kg for the 100- kW{sub e} and 250-kW{sub e} systems, respectively, each with two totally redundant power conversion units, including the mass of the single reactor and shield. Initial conceptual designs for each of the components were developed in order to estimate component masses. In addition, an overall system concept was presented that was designed to fit within the launch envelope of a heavy lift vehicle. A technology development plan is presented in the report that describes the major efforts that are required to reach a technology readiness level of 6. A 10-year development plan was proposed.

  3. Advanced transportation system studies technical area 2 (TA-2): Heavy lift launch vehicle development. volume 3; Program Cost estimates

    Science.gov (United States)

    McCurry, J. B.

    1995-01-01

    The purpose of the TA-2 contract was to provide advanced launch vehicle concept definition and analysis to assist NASA in the identification of future launch vehicle requirements. Contracted analysis activities included vehicle sizing and performance analysis, subsystem concept definition, propulsion subsystem definition (foreign and domestic), ground operations and facilities analysis, and life cycle cost estimation. The basic period of performance of the TA-2 contract was from May 1992 through May 1993. No-cost extensions were exercised on the contract from June 1993 through July 1995. This document is part of the final report for the TA-2 contract. The final report consists of three volumes: Volume 1 is the Executive Summary, Volume 2 is Technical Results, and Volume 3 is Program Cost Estimates. The document-at-hand, Volume 3, provides a work breakdown structure dictionary, user's guide for the parametric life cycle cost estimation tool, and final report developed by ECON, Inc., under subcontract to Lockheed Martin on TA-2 for the analysis of heavy lift launch vehicle concepts.

  4. The Under-Utilization and Problems Associated with the Advanced Placement Program of Adult High School Students

    Science.gov (United States)

    Barham, Mary Ann

    2009-01-01

    The purpose of this study was to investigate the low participation rate among high school students 18 years of age or older in Advanced Placement courses. The subjects in this study were 129 Advanced Placement Students and 129 non-Advanced Placement high school students 18 years of age or older in five high schools in two Louisiana parishes.…

  5. Comparison of electrically evoked compound action potential thresholds and loudness estimates for the stimuli used to program the Advanced Bionics cochlear implant.

    Science.gov (United States)

    Jeon, Eun Kyung; Brown, Carolyn J; Etler, Christine P; O'Brien, Sara; Chiou, Li-Kuei; Abbas, Paul J

    2010-01-01

    In the mid-1990s, Cochlear Corporation introduced a cochlear implant (CI) to the market that was equipped with hardware that made it possible to record electrically evoked compound action potentials (ECAPs) from CI users of all ages. Over the course of the next decade, many studies were published that compared ECAP thresholds with levels used to program the speech processor of the Nucleus CI. In 2001 Advanced Bionics Corporation introduced the Clarion CII cochlear implant (the Clarion CII internal device is also known as the CII Bionic Ear). This cochlear implant was also equipped with a system that allowed measurement of the ECAP. While a great deal is known about how ECAP thresholds compare with the levels used to program the speech processor of the Nucleus CI, relatively few studies have reported comparisons between ECAP thresholds and the levels used to program the speech processor of the Advanced Bionics CI. To explore the relationship between ECAP thresholds and behavioral measures of perceptual dynamic range for the range of stimuli commonly used to program the speech processor of the Advanced Bionics CI. This prospective and experimental study uses correlational and descriptive statistics to define the relationship between ECAP thresholds and perceptual dynamic range measures. Twelve postlingually deafened adults participated in this study. All were experienced users of the Advanced Bionics CI system. ECAP thresholds were recorded using the commercially available SoundWave software. Perceptual measures of threshold (T-level), most comfortable level (M-level), and maximum comfortable level (C-level) were obtained using both "tone bursts" and "speech bursts." The relationship between these perceptual and electrophysiological variables was defined using paired t-tests as well as correlation and linear regression. ECAP thresholds were significantly correlated with the perceptual dynamic range measures studied; however, correlations were not strong. Analysis of

  6. Advanced NDE Technology Program

    Science.gov (United States)

    1992-08-01

    TIME-RESOLVED INFRARED RADIOMETRY (TRIR) TO IDENTIFY STRUCTURAL DAMAGE IN COMPOSITE MATERIALS J. W. Maclachlan Spicer, L. C. Aamodt , and J. C. Murphy...in Metal Alloys," by J. C. Murphy, G. C. Wetzel, Jr., and L. C. Aamodt , Review of Progress in Quantitative Nondestructive Evaluation, D. 0. Thompson...J. C. Murph,, J. W. Maclachlan, and L. C. Aamodt , Review of Progress in Quantitative Nondestructive Evaluation, D. 0. Thompson and D. E. Chimenti, eds

  7. Advanced Exploration Systems Program

    Data.gov (United States)

    National Aeronautics and Space Administration — AES consists of more than 35 projects that target high-priority capabilities needed for human exploration such as crew mobility, deep-space habitation, vehicle...

  8. Assisting persons with advanced amyotrophic lateral sclerosis in their leisure engagement and communication needs with a basic technology-aided program.

    Science.gov (United States)

    Lancioni, Giulio E; Simone, Isabella L; De Caro, Maria F; Singh, Nirbhay N; O'Reilly, Mark F; Sigafoos, Jeff; Ferlisi, Gabriele; Zullo, Valeria; Schirone, Simona; Denitto, Floriana; Zonno, Nadia

    2015-01-01

    Eye-tracking communication devices and brain-computer interfaces are the two resources available to help people with advanced amyotrophic lateral sclerosis (ALS) avoid isolation and passivity. This study was aimed at assessing a technology-aided program (i.e., a third possible resource) for five patients with advanced ALS who needed support for communication and leisure activities. The participants were exposed to baseline and intervention conditions. The technology-aided program, which was used during the intervention, (a) included the communication and leisure options that each participant considered important for him or her (e.g., music, videos, statements/requests, and text messaging) and (b) allowed the participant to access those options with minimal responses (e.g., finger movement or eyelid closure) monitored via microswitches. The participants started leisure and communication engagement independently only during the intervention (i.e., when the program was used). The mean percentages of session time spent in those forms of engagement were between about 60 and 80. Preference checks and brief interviews indicated that participants and families liked the program. The program might be viewed as an additional approach/resource for patients with advanced ALS.

  9. The development of SIMMER-III, an advanced computer program for LMFR safety analysis, and its application to sodium experiments

    Energy Technology Data Exchange (ETDEWEB)

    Tobita, Y.; Kondo, S.A.; Yamano, H. [Japan Nuclear Cycle Development Institute, ATD0OEC, 4002 Narita O-arai, Ibaraki, 311-1393 (Japan); Morita, K. [Kyusyu University, Institute of Enviromental Systems 6-10-1 Hakozaki, Higashi-ku, Fukuoka 812-8581 (Japan); Maschek, W. [Forschungszentrum Karlsruhe, IKET, Postfach 3640 D-76021, Karlsruhe (Germany); Coste, P. [CEA, DRN/DTP/SMTH, CE de Grenoble 38054 Grenoble CEDEX 9 (France); Cadiou, T. [CEA, DENCAD/DER/SERI, CE de Cadarache 13108 Saint Paul lez Durance CEDEX (France)

    2006-07-01

    generalized and flexible code framework, along with improved numerical stability and accuracy, allows us to apply it to a variety of simple and complex multiphase flow problems. The code assessment program is an ongoing effort. Two major milestones have been achieved in the past by completing two assessment campaigns, Phase 1 and Phase 2: Phase 1 for fundamental code assessment of individual models and Phase 2 for integral code assessment for key phenomena relevant to liquid-metal-cooled fast reactor safety. Through this systematic code assessment program, comprehensive validation of the physical models has been conducted step-by-step. The assessment program has demonstrated that SIMMER-III is a state-of-the-art code with advanced models sufficiently flexible for simulating transient multiphase phenomena occurring during core disruptive accidents. This paper concentrates on the specifics of the code, mainly reflected in its application to sodium experiments related to the safety of liquid-metal-cooled fast reactors. (authors)

  10. Summary Report for ASC L2 Milestone #4782: Assess Newly Emerging Programming and Memory Models for Advanced Architectures on Integrated Codes

    Energy Technology Data Exchange (ETDEWEB)

    Neely, J. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hornung, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Black, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Robinson, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-09-29

    This document serves as a detailed companion to the powerpoint slides presented as part of the ASC L2 milestone review for Integrated Codes milestone #4782 titled “Assess Newly Emerging Programming and Memory Models for Advanced Architectures on Integrated Codes”, due on 9/30/2014, and presented for formal program review on 9/12/2014. The program review committee is represented by Mike Zika (A Program Project Lead for Kull), Brian Pudliner (B Program Project Lead for Ares), Scott Futral (DEG Group Lead in LC), and Mike Glass (Sierra Project Lead at Sandia). This document, along with the presentation materials, and a letter of completion signed by the review committee will act as proof of completion for this milestone.

  11. Living with hope: developing a psychosocial supportive program for rural women caregivers of persons with advanced cancer

    Directory of Open Access Journals (Sweden)

    Williams Allison M

    2010-03-01

    Full Text Available Abstract Background Hope is defined by caregivers as the inner strength to achieve future good and to continue care giving. Pilot test findings of a Living with Hope Program (LWHP suggested it is an acceptable and feasible intervention for use by family caregivers. Although it shows promise in potentially increasing hope and quality of life, further testing and development is needed. Questions remain as to: a what are the mechanisms through which the LWHP affects outcomes and b how long it is effective? The overall purpose of this time series mixed method study is the further development and testing of the LWHP by: a. Determining the mechanisms of the LWHP by testing a LWHP conceptual model in which self-efficacy, and loss/grief are hypothesized intermediary variables for changes in hope, and subsequently quality of life among rural women caring for persons with advanced cancer, and; b. Exploring the longitudinal effects of the LWHP on hope, quality of life and health services utilization among rural women caring for persons with advanced cancer. Methods/Design Using a time-series embedded mixed method design, data will be collected from 200 rural women caregivers. Following the collection of baseline and outcome variables, the intervention (LWHP is applied to all subjects. Subjects are followed over time with repeated measures of outcome variables (1 wk, 2 wk, 3, 6 and 12 months. The journals that are completed as part of the LWHP comprise the qualitative data. Health services utilization data will be collected from the Saskatchewan Health Administrative Database for all subjects one year prior and one year after study enrolment. Path analysis will be used to test the model post LWHP, at 1 and 2 weeks. Two-factor ANCOVA will determine patterns over time and Cortazzi's narrative analysis will be used to analyze subjects journals completed as part of the LWHP. Discussion Data Collection began January 2009 and is expected to be completed within 2

  12. DOE Project: Optimization of Advanced Diesel Engine Combustion Strategies "University Research in Advanced Combustion and Emissions Control" Office of FreedomCAR and Vehicle Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    Reitz, Rolf; Foster, D.; Ghandhi, J.; Rothamer, D.; Rutland, C.; Sanders, S.; Trujillo, M.

    2012-10-26

    The goal of the present technology development was to increase the efficiency of internal combustion engines while minimizing the energy penalty of meeting emissions regulations. This objective was achieved through experimentation and the development of advanced combustion regimes and emission control strategies, coupled with advanced petroleum and non-petroleum fuel formulations. To meet the goals of the project, it was necessary to improve the efficiency of expansion work extraction, and this required optimized combustion phasing and minimized in-cylinder heat transfer losses. To minimize fuel used for diesel particulate filter (DPF) regeneration, soot emissions were also minimized. Because of the complex nature of optimizing production engines for real-world variations in fuels, temperatures and pressures, the project applied high-fidelity computing and high-resolution engine experiments synergistically to create and apply advanced tools (i.e., fast, accurate predictive models) developed for low-emission, fuel-efficient engine designs. The companion experiments were conducted using representative single- and multi-cylinder automotive and truck diesel engines.

  13. The Cementitious Barriers Partnership Experimental Programs and Software Advancing DOE’s Waste Disposal/Tank Closure Efforts – 15436

    Energy Technology Data Exchange (ETDEWEB)

    Burns, Heather [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Flach, Greg [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Smith, Frank [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Langton, Christine [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Brown, Kevin [Vanderbilt Univ./CRESP, Nashville, TN (United States); Kosson, David [Vanderbilt Univ./CRESP, Nashville, TN (United States); Samson, Eric [SIMCO Technologies, Inc. (United States); Mallick, Pramod [US DOE, Washington, DC (United States)

    2015-01-27

    The U.S. Department of Energy Environmental Management (DOE-EM) Office of Tank Waste Management-sponsored Cementitious Barriers Partnership (CBP) is chartered with providing the technical basis for implementing cement-based waste forms and radioactive waste containment structures for long-term disposal. DOE needs in this area include the following to support progress in final treatment and disposal of legacy waste and closure of High-Level Waste (HLW) tanks in the DOE complex: long-term performance predictions, flow sheet development and flow sheet enhancements, and conceptual designs for new disposal facilities. The DOE-EM Cementitious Barriers Partnership is producing software and experimental programs resulting in new methods and data needed for end-users involved with environmental cleanup and waste disposal. Both the modeling tools and the experimental data have already benefited the DOE sites in the areas of performance assessments by increasing confidence backed up with modeling support, leaching methods, and transport properties developed for actual DOE materials. In 2014, the CBP Partnership released the CBP Software Toolbox –“Version 2.0” which provides concrete degradation models for 1) sulfate attack, 2) carbonation, and 3) chloride initiated rebar corrosion, and includes constituent leaching. These models are applicable and can be used by both DOE and the Nuclear Regulatory Commission (NRC) for service life and long-term performance evaluations and predictions of nuclear and radioactive waste containment structures across the DOE complex, including future SRS Saltstone and HLW tank performance assessments and special analyses, Hanford site HLW tank closure projects and other projects in which cementitious barriers are required, the Advanced Simulation Capability for Environmental Management (ASCEM) project which requires source terms from cementitious containment structures as input to their flow simulations, regulatory reviews of DOE performance

  14. NRC review of Electric Power Research Institute's Advanced Light Reactor Utility Requirements Document - Program summary, Project No. 669

    Energy Technology Data Exchange (ETDEWEB)

    1992-08-01

    The staff of the US Nuclear Regulatory Commission has prepared Volume 1 of a safety evaluation report (SER), NRC Review of Electric Power Research Institute's Advanced Light Water Reactor Utility Requirements Document -- Program Summary,'' to document the results of its review of the Electric Power Research Institute's Advanced Light Water Reactor Utility Requirements Document.'' This SER provides a discussion of the overall purpose and scope of the Requirements Document, the background of the staff's review, the review approach used by the staff, and a summary of the policy and technical issues raised by the staff during its review.

  15. Space Launch System (SLS) Program Overview NASA Research Announcement (NRA) Advanced Booster (AB) Engineering Demonstration and Risk Reduction (EDRR) Industry Day

    Science.gov (United States)

    May, Todd A.

    2011-01-01

    SLS is a national capability that empowers entirely new exploration for missions of national importance. Program key tenets are safety, affordability, and sustainability. SLS builds on a solid foundation of experience and current capacities to enable a timely initial capability and evolve to a flexible heavy-lift capability through competitive opportunities: (1) Reduce risks leading to an affordable Advanced Booster that meets the evolved capabilities of SLS (2) Enable competition by mitigating targeted Advanced Booster risks to enhance SLS affordability and performance The road ahead promises to be an exciting journey for present and future generations, and we look forward to working with you to continue America fs space exploration.

  16. Comparing two lower-dose cisplatin programs for radio-chemotherapy of locally advanced head-and-neck cancers.

    Science.gov (United States)

    Rades, Dirk; Seidl, Daniel; Janssen, Stefan; Strojan, Primoz; Karner, Katarina; Bajrovic, Amira; Hakim, Samer G; Wollenberg, Barbara; Schild, Steven E

    2017-02-01

    Radio-chemotherapy is a common treatment for locally advanced squamous cell head-and-neck cancers (LA-SCCHN). Cisplatin (100 mg/m2) every 3 weeks is very common but associated with considerable toxicity. Therefore, cisplatin programs with lower daily doses were introduced. There is a lack of studies comparing lower-dose programs. In this study, 85 patients receiving radio-chemotherapy with 20 mg/m2 cisplatin on 5 days every 4 weeks (group A) were retrospectively compared to 85 patients receiving radio-chemotherapy with 30-40 mg/m2 cisplatin weekly (group B). Groups were matched for nine factors including age, gender, performance score, tumor site, T-/N-category, surgery, hemoglobin before radio-chemotherapy, and radiation technique. One- and 3-year loco-regional control rates were 83 and 69 % in group A versus 74 and 63 % in group B (p = 0.12). One- and 3-year survival rates were 93 % and 73 % in group A versus 91 and 49 % in group B (p = 0.011). On multivariate analysis, survival was significantly better for group A (HR 1.17; p = 0.002). In groups A and B, 12 and 28 % of patients, respectively, did not receive a cumulative cisplatin dose ≥180 mg/m2 (p = 0.016). Toxicity rates were not significantly different. On subgroup analyses, group A patients had better loco-regional control (p = 0.040) and survival (p = 0.005) than group B patients after definitive radio-chemotherapy. In patients receiving adjuvant radio-chemotherapy, outcomes were not significantly different. Thus, 20 mg/m2 cisplatin on 5 days every 4 weeks resulted in better loco-regional control and survival in patients receiving definitive radio-chemotherapy and may be preferable for these patients. Confirmation of these results in a randomized trial is warranted.

  17. Prognostic value of programmed death ligand 1, p53, and Ki-67 in patients with advanced stage colorectal cancer.

    Science.gov (United States)

    Wang, Lisha; Liu, Zebing; Fisher, Kurt W; Ren, Fei; Lv, Jiaojie; Davidson, Darrell D; Baldridge, Lee A; Du, Xiang; Cheng, Liang

    2017-08-04

    Current prognostic indicators are ineffective for identifying advanced stage colorectal cancer (CRC) patients with high risk of recurrence after surgical resection. We investigated the prognostic value of p53, Ki-67, and programmed death ligand 1 (PD-L1) in 254 patients with stage II and III CRC. The expression of p53 was positive in 63% of cases. Up-regulation of p53 was associated with smaller tumor size (P=.001) and higher Ki-67 labeling index (LI) (P=.031). The tumor Ki-67 LI was high (≥ 20%) in 197 (78%) of the patients. High Ki-67 LI was associated with higher TNM stage (P=.031), positive p53 expression (P=.031), and negative PD-L1 expression (P=.003). The five-year relapse-free survivals (RFS) were 53% and 89%, respectively, for the p53-positive and Ki-67 LI-high patients and the p53-negative and Ki-67 LI-low patients (Pp53 (P=.001), low Ki-67 LI (P=.006), low PD-L1 expression (P=.044), low TNM stage (Pp53 expression (hazard ratio [HR]: 2.48; 95% confidence interval: 1.34-4.59, P=.004), high Ki-67 LI (HR: 2.62; 95% CI: 1.12-6.14, P=.027) and high TNM stage (HR: 2.598, 95% CI: 1.55-4.37, Pp53 staining individually had significant prognostic value for patients with stage II and III CRC. Moreover, combining p53 H-score≥35 and Ki-67 LI≥20% identifies patients with poor clinical outcome. Copyright © 2017. Published by Elsevier Inc.

  18. HER2 testing in advanced gastric and gastro-oesophageal cancer: analysis of an Australia-wide testing program.

    Science.gov (United States)

    Kumarasinghe, M Priyanthi; Morey, Adrienne; Bilous, Michael; Farshid, Gelareh; Francis, Glenn; Lampe, Guy; McCue, Glenda; Von Neumann-Cosel, Vita; Fox, Stephen B

    2017-10-01

    This Australian human epidermal growth factor receptor 2 (HER2) testing program aimed to analyse >800 cases tested in a coordinated setting to further evaluate the criteria to establish HER2 status in advanced gastric and gastro-oesophageal junction (GOJ) cancer. Heterogeneity, and minimum number of biopsy fragments for reliable HER2 assessment were also examined in a subset of samples. Five laboratories tested 891 samples referred to determine HER2 status for potential anti-HER2 treatment. Cancer site, specimen type (endoscopic biopsy/resection/metastases), immunohistochemistry (IHC) score, HER2 gene and CEP17 copy number (CN) and HER2:CEP17 ratios were recorded. Samples were derived from stomach (53.1%), GOJ (28.2%) or metastases (18.5%). IHC for HER2 and dual probe HER2:CEP17 in situ hybridisation (ISH) were performed in parallel. A stringent definition (SD) of HER2 positivity was used (IHC2+/3+ plus CN>6 and ratio>2) and compared with other published criteria. HER2 positive rate was 13.9% (114/820) by SD, and 12.9-16.0% using other definitions. There was higher concordance between IHC and HER2 CN by ISH than with ratio. The HER2 positive rate was significantly higher in GOJ samples than others (p = 0.03) and in endoscopic biopsies than resections (p = 0.047). In a subset of 98 positive cases, 39 (39.8%) showed heterogeneity, and in 282 endoscopic biopsies positivity rate plateaued at five tumour fragments, suggesting this is the minimum number of biopsies that should be examined. Copyright © 2017 Royal College of Pathologists of Australasia. All rights reserved.

  19. Research investigations in oil shale, tar sand, coal research, advanced exploratory process technology, and advanced fuels research: Volume 2 -- Jointly sponsored research program. Final report, October 1986--September 1993

    Energy Technology Data Exchange (ETDEWEB)

    Smith, V.E.

    1994-09-01

    Numerous studies have been conducted in five principal areas: oil shale, tar sand, underground coal gasification, advanced process technology, and advanced fuels research. In subsequent years, underground coal gasification was broadened to be coal research, under which several research activities were conducted that related to coal processing. The most significant change occurred in 1989 when the agreement was redefined as a Base Program and a Jointly Sponsored Research Program (JSRP). Investigations were conducted under the Base Program to determine the physical and chemical properties of materials suitable for conversion to liquid and gaseous fuels, to test and evaluate processes and innovative concepts for such conversions, to monitor and determine environmental impacts related to development of commercial-sized operations, and to evaluate methods for mitigation of potential environmental impacts. This report is divided into two volumes: Volume 1 consists of 28 summaries that describe the principal research efforts conducted under the Base Program in five topic areas. Volume 2 describes tasks performed within the JSRP. Research conducted under this agreement has resulted in technology transfer of a variety of energy-related research information. A listing of related publications and presentations is given at the end of each research topic summary. More specific and detailed information is provided in the topical reports referenced in the related publications listings.

  20. 78 FR 23946 - Extension of the Air Cargo Advance Screening (ACAS) Pilot Program and Reopening of Application...

    Science.gov (United States)

    2013-04-23

    ... SECURITY U.S. Customs and Border Protection Extension of the Air Cargo Advance Screening (ACAS) Pilot... that CBP is formalizing and expanding the ACAS pilot to include other eligible participants in the air... advance information for air cargo. The results of the ACAS pilot will help determine the relevant data...

  1. Airline return-on-investment model for technology evaluation. [computer program to measure economic value of advanced technology applied to passenger aircraft

    Science.gov (United States)

    1974-01-01

    This report presents the derivation, description, and operating instructions for a computer program (TEKVAL) which measures the economic value of advanced technology features applied to long range commercial passenger aircraft. The program consists of three modules; and airplane sizing routine, a direct operating cost routine, and an airline return-on-investment routine. These modules are linked such that they may be operated sequentially or individually, with one routine generating the input for the next or with the option of externally specifying the input for either of the economic routines. A very simple airplane sizing technique was previously developed, based on the Brequet range equation. For this program, that sizing technique has been greatly expanded and combined with the formerly separate DOC and ROI programs to produce TEKVAL.

  2. Fossil Energy Advanced Research and Technology Development (AR TD) Materials Program semiannual progress report for the period ending September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Judkins, R.R.; Cole, N.C. (comps.)

    1992-04-01

    The objective of the Fossil Energy Advanced Research and Technology Development Materials Program is to conduct research and development on materials for fossil energy applications with a focus on the longer-term and generic needs of the various fossil fuel technologies. The Program includes research aimed toward a better understanding of materials behavior in fossil energy environments and the development of new materials capable of substantial enhancement of plant operations and reliability. Research is outlined in four areas: Ceramics, New Alloys, Corrosion and Erosion Research, and Technology Development and Transfer. (VC)

  3. 2nd Hong Kong University of Science and Technology Jockey Club Institute for Advanced Study Program on High Energy Physics Conference

    CERN Document Server

    Prokofiev, Kirill; HKUST 2016; HKUST IAS Program on High Energy Physics Conference; Future of high energy physics : some aspects

    2017-01-01

    This book comprises 26 carefully edited articles with well-referenced and up-to-date material written by many of the leading experts. These articles originated from presentations and dialogues at the second HKUST Institute for Advanced Study Program on High Energy Physics are organized into three aspects, Theory, Accelerator, and Experiment, focusing on in-depth analyses and technical aspects that are essential for the developments and expectations for the future high energy physics.

  4. AISI/DOE Advanced Process Control Program Vol. 3 of 6 Microstructure Engineering in Hot Strip Mills, Part 1 of 2: Integrated Mathematical Model

    Energy Technology Data Exchange (ETDEWEB)

    J.K. Brimacombe; I.V. Samarasekera; E.B. Hawbolt; T.R. Meadowcroft; M. Militzer; W.J. Pool; D.Q. Jin

    1999-07-31

    This report describes the work of developing an integrated model used to predict the thermal history, deformation, roll forces, microstructural evolution and mechanical properties of steel strip in a hot-strip mill. This achievement results from a joint research effort that is part of the American Iron and Steel Institute's (AIS) Advanced Process Control Program, a collaboration between the U.S. DOE and fifteen North American Steelmakers.

  5. Implications of Results from the Advanced Gas Reactor Fuel Development and Qualification Program on Licensing of Modular HTGRs

    Energy Technology Data Exchange (ETDEWEB)

    David Petti

    2001-10-01

    The high level of safety of modular high temperature gas-cooled reactor (HTGR) designs is achieved by passively maintaining core temperatures below fission product release thresholds under all envisioned accident scenarios. This level of fuel performance and fission product retention reduces the radioactive source term by many orders of magnitude relative to other reactor types but is predicated on exceptionally high coated-particle fuel fabrication quality and excellent fuel performance under normal operation and accident conditions. The Advanced Gas Reactor Fuel Development and Qualification (AGR) Program decided to qualify for uranium oxide/uranium carbide (UCO) TRISO coated-particle fuel in an operating envelope that would bound both pebble bed and prismatic modular HTGR options. By using a mixture of uranium oxide and uranium carbide, the kernel composition is engineered to minimize CO formation and fuel kernel migration, which is key to maintain to fuel integrity at the higher burnups, temperatures, and temperature gradients anticipated in prismatic HTGRs. Fuel fabrication conducted at both laboratory and engineering scale has demonstrated the ability to fabricate high quality UCO TRISO fuel with very low defects. The first irradiation (AGR 1) exposed about 300,000 TRISO fuel particles to a peak burnup of 19.6% FIMA, a peak fast-neutron fluence of about 4.3 × 1025 n/m2, and a maximum time-averaged fuel temperature of about 1,200°C without a single particle failure. The very low release of key metallic fission products (except silver) measured in post-irradiation examination (PIE) confirms the excellent performance measured under irradiation. Very low releases have been measured in accident simulation heatup testing (''safety testing'') after hundreds of hours at 1600 and 1700°C and no particle failures (no noble gas release measured) have been observed. Even after hundreds of hours at 1800°C, the releases are

  6. A Program of Research and Education to Advance the Design, Synthesis, and Optimization of Aero-Space System Concepts

    Science.gov (United States)

    Sandusky, Robert

    2002-01-01

    Since its inception in December 1999, the program has provided support for a total of 11 Graduate Research Scholar Assistants, of these, 6 have completed their MS degree program. The program has generated 3 MS theses and a total of 4 publications/presentations.

  7. Advanced Technology Section semiannual progress report, April 1-September 30, 1977. Volume 1. Biotechnology and environmental programs. [Lead Abstract

    Energy Technology Data Exchange (ETDEWEB)

    Pitt, W.W. Jr.; Mrochek, J.E. (comps.)

    1980-06-01

    Research efforts in six areas are reported. They include: centrifugal analyzer development; advanced analytical systems; environmental research; bioengineering research;bioprocess development and demonstration; and, environmental control technology. Individual abstracts were prepared for each section for ERA/EDB. (JCB)

  8. Advanced CORK (ACORK) Data from the Nankai Trough, Ocean Drilling Program (ODP) Holes 808I and 1173B

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The ASCII datasets contain pressure values measured at 10-min intervals at the seafloor and several subseafloor depths in two "Advanced CORK" hydrologic...

  9. DOE FreedomCAR and vehicle technologies program advanced power electronic and electrical machines annual review report

    Energy Technology Data Exchange (ETDEWEB)

    Olszewski, Mitch [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2006-10-11

    This report is a summary of the Review Panel at the FY06 DOE FreedomCAR and Vehicle Technologies (FCVT) Annual Review of Advanced Power Electronics and Electric Machine (APEEM) research activities held on August 15-17, 2006.

  10. From Entry to Practice to Advanced Nurse Practitioner - The Progression of Competencies and How They Assist in Delivery of eHealth Programs for Healthy Ageing.

    Science.gov (United States)

    Rodger, Daragh; Hussey, Pamela

    2017-01-01

    Most of the health issues encountered in persons of older age are the result of one or more chronic diseases. The evidence base reports that chronic diseases can be prevented or delayed by engaging in healthy behaviors. Education provides a cost effective intervention on both economic grounds in addition to delivery of optimal patient outcomes. Information and Communication Technology (ICT) increasingly is viewed as a critical utility in eHealth delivery, providing scope for expanding online education facilities for older persons. Developing nursing competencies in the delivery of eHealth solutions to deliver user education programs therefore makes sense. This chapter discusses nursing competencies on the development of targeted eHealth programs for healthy ageing. The role of Advanced Nurse Practitioner in Ireland and its associated competency set identifies how a strong action learning model can be designed to deliver eHealth educational programs for effective delivery of healthy ageing in place.

  11. Description of PDP-9 Software Used for Advanced Modem Experiments -- Time-of-Arrival Words Distribution Display Program (TIMWD),

    Science.gov (United States)

    COMPUTER PROGRAMS, INSTRUCTION MANUALS), (*MODULATORS, TEST METHODS), (*DEMODULATORS, TEST METHODS), CODING, BINARY ARITHMETIC, DATA TRANSMISSION SYSTEMS , MEMORY DEVICES, STATISTICAL ANALYSIS, INTERFACES

  12. Positive and Negative Numbers: Level I, Unit 6, Lesson 1; States of Matter: Lesson 2; Properties and Measures of Matter: Lesson 3; Energy, Matter, Theory and Law: Lesson 4; The Particles and Structure of Matter: Lesson 5. Advanced General Education Program. A High School Self-Study Program.

    Science.gov (United States)

    Manpower Administration (DOL), Washington, DC. Job Corps.

    An advanced General Education Program has been designed to prepare an individual with the information concepts, and general knowledge required to successfully pass the American Council on Education's High School General Education Development (GED) Test. The Advanced General Education Program provides comprehensive self-instruction in each of the…

  13. 78 FR 63237 - Extension of the Air Cargo Advance Screening (ACAS) Pilot Program and Reopening of Application...

    Science.gov (United States)

    2013-10-23

    ... SECURITY U.S. Customs and Border Protection Extension of the Air Cargo Advance Screening (ACAS) Pilot... air cargo environment. The notice provides a description of the ACAS pilot, sets forth eligibility... information for air cargo. The results of the ACAS pilot will help determine the relevant data elements, the...

  14. Foreign-trained dentists in advanced education in prosthodontics programs in the United States: demographics, perspectives on current training, and future goals.

    Science.gov (United States)

    Al-Sowygh, Zeyad H; Sukotjo, Cortino

    2011-02-01

    This study investigated the perspectives of foreign-trained dentists (FTDs) in comparison with US-trained Dentists (USTDs) in Advanced Education in Prosthodontics (AEP) programs on their current clinical training and future goals. This study was conducted by analyzing data from previously published literature. When appropriate, Chi-square statistical analysis was conducted to determine the influence of where the AEP residents earned their DMD/DDS degree (FTDs/USTDs) on all variables. Only results that yielded significant differences were discussed. A majority of both FTDs and USTDs were male. Most USTDs were married, while most FTDs were single. Most FTDs were not US citizens and most originated from Asia, followed by the Middle East, South America, and Europe. Significantly more FTDs had higher ranks in their dental schools, had more advanced degrees, and spent more time practicing before entering the AEP programs. In selecting AEP programs, FTDs placed significantly higher values on a program's reputation and research opportunities. During their AEP training, FTDs paid significantly higher tuition and received lower stipends, but obtained more financial support from families. On the other hand, USTDs received significantly more financial aid and earned income from part-time work, but had significantly higher total educational debts. USTDs showed a significantly higher interest in becoming a student member of the American College of Prosthodontists and participated actively in prosthodontics organizations. USTDs were more interested in becoming maxillofacial prosthodontists, while FTDs were more interested in pursuing academic careers. FTDs differed from USTDs in several ways. Because of their interests in academics and research, FTDs may potentially have a positive impact on the development of the prosthodontics discipline. This information may be beneficial for AEP program directors in accommodating the needs of FTDs, and for FTDs in better preparing for their

  15. Developmental Programming: Prenatal and Postnatal Androgen Antagonist and Insulin Sensitizer Interventions Prevent Advancement of Puberty and Improve LH Surge Dynamics in Prenatal Testosterone-Treated Sheep.

    Science.gov (United States)

    Padmanabhan, Vasantha; Veiga-Lopez, Almudena; Herkimer, Carol; Abi Salloum, Bachir; Moeller, Jacob; Beckett, Evan; Sreedharan, Rohit

    2015-07-01

    Prenatal T excess induces maternal hyperinsulinemia, early puberty, and reproductive/metabolic defects in the female similar to those seen in women with polycystic ovary syndrome. This study addressed the organizational/activational role of androgens and insulin in programming pubertal advancement and periovulatory LH surge defects. Treatment groups included the following: 1) control; 2) prenatal T; 3) prenatal T plus prenatal androgen antagonist, flutamide; 4) prenatal T plus prenatal insulin sensitizer, rosiglitazone; 5) prenatal T and postnatal flutamide; 6) prenatal T and postnatal rosiglitazone; and 7) prenatal T and postnatal metformin. Prenatal treatments spanned 30-90 days of gestation and postnatal treatments began at approximately 8 weeks of age and continued throughout. Blood samples were taken twice weekly, beginning at approximately 12 weeks of age to time puberty. Two-hour samples after the synchronization with prostaglandin F2α were taken for 120 hours to characterize LH surge dynamics at 7 and 19 months of age. Prenatal T females entered puberty earlier than controls, and all interventions prevented this advancement. Prenatal T reduced the percentage of animals having LH surge, and females that presented LH surge exhibited delayed timing and dampened amplitude of the LH surge. Prenatal androgen antagonist, but not other interventions, restored LH surges without normalizing the timing of the surge. Normalization of pubertal timing with prenatal/postnatal androgen antagonist and insulin sensitizer interventions suggests that pubertal advancement is programmed by androgenic actions of T involving insulin as a mediary. Restoration of LH surges by cotreatment with androgen antagonist supports androgenic programming at the organizational level.

  16. A Program of Research and Education in Aerospace Structures at the Joint Institute for Advancement of Flight Sciences

    Science.gov (United States)

    Tolson, Robert H.

    2000-01-01

    The objectives of the cooperative effort with NASA was to conduct research related to aerospace structures and to increase the quality and quantity of highly trained engineers knowledgeable about aerospace structures. The program has successfully met the objectives and has been of significant benefit to NASA LARC, the GWU and the nation. The program was initiated with 3 students in 1994 under the direction of Dr. Robert Tolson as the Principal Investigator. Since initiation, 14 students have been involved in the program, resulting in 11 MS degrees with 2 more expected in 2000. The 11 MS theses and projects are listed. For technology transfer purposes some research is not reported in thesis form. Graduates from the program have been hired at aerospace and other companies across the nation, providing GWU and LARC with important industry and government contacts.

  17. Advanced Researech and Technology Development fossil energy materials program: Semiannual progress report for the period ending September 30, 1988

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    The objective of the ARandTD Fossil Energy Materials Program is to conduct research and development on materials for fossil energy applications with a focus on the longer-term and generic needs of the various fossil fuel technologies. The program includes research aimed toward a better understanding of materials behavior in fossil energy environments and the development of new materials capable of substantial enhancement of plant operations and reliability. The ORNL Fossil Energy Materials Program Office compiles and issues this combined semiannual progress report from camera-ready copies submitted by each of the participating subcontractor organizations. This report of activities on the program is organized in accordance with a work breakdown structure in which projects are organized according to materials research thrust areas. These areas are (1) Structural Ceramics, (2) Alloy Development and Mechanical Properties, (3) Corrosion and Erosion of Alloys, and (4) Assessments and Technology Transfer. Individual projects are processed separately for the data bases.

  18. Application of Transformational Leadership Principles in the Development and Integration of Palliative Care Within an Advanced Heart Failure Program.

    Science.gov (United States)

    George, Susan; Leasure, A Renee

    2016-01-01

    Heart failure (HF) is a major health problem in United States, and it has reached epidemic proportions. Heart failure is associated with significant morbidity, mortality, and cost. Although the prognosis of HF is worse than many forms of cancer, many patients, families, and clinicians are unaware of the dire prognosis. As the disease progress to advanced HF, patients are faced with many challenges, such as poor quality of life due to worsening symptoms and frequent hospitalizations. Heart failure management adds significant financial burden to the health care system. Palliative care can be integrated into HF care to improve quality of life and symptom management and to address physical, spiritual, and psychosocial needs of patients and families. Palliative care can be used concurrently with or independent of curative or life-prolonging HF therapies. Transformational leadership principles were used to guide the development of a plan to enhance integration of palliative care within traditional advanced HF care.

  19. DoD and Commercial Advanced Waveform Developments and Programs with Multiple Nunn-McCurdy Breaches. Volume 5

    Science.gov (United States)

    2014-01-01

    Analysis Improvement Group Cdma Code Division Multiple Access CMSP commercial mobile service provider CORBA Common Object Request Broker Architecture COTS...component of a planned tactical military communications system) and the long- term evolution (LTE) waveform (a key component of advanced commercial mobile ...most contribute to its less-than-favorable comparison with LTE, four stand out. First, the amount spent on JTRS Ground Mobile Radio (GMR) and WNW

  20. Introduction to strategic research programAdvanced Technologies of Energy Generation” under which the Smart Grid concept is developed

    Directory of Open Access Journals (Sweden)

    Marek Laskowski

    2016-01-01

    Full Text Available The paper presents a brief introduction to strategic programme “Advanced Technologies of Energy Generation”, under which Research Task 4. “Development of Integrated technologies for Production of Fuels and Energy from Biomass, Agricultural Waste and Other Materials” is implemented. The context justifies joining the task, its main objectives, management structure, and entities involved. Also justified is the inclusion of Smart Grid concept to the project scope.

  1. Advanced Turbine Systems (ATS) program conceptual design and product development. Quarterly report, August 25--November 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    GE has achieved a leadership position in the worldwide gas turbine industry in both industrial/utility markets and in aircraft engines. This design and manufacturing base plus our close contact with the users provides the technology for creation of the next generation advanced power generation systems for both the industrial and utility industries. GE has been active in the definition of advanced turbine systems for several years. These systems will leverage the technology from the latest developments in the entire GE gas turbine product line. These products will be USA based in engineering and manufacturing and are marketed through the GE Industrial and Power Systems. Achieving the advanced turbine system goals of 60% efficiency, 8 ppmvd NOx and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NOx emission. Improved coating and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal.

  2. Advanced Turbine Systems (ATS) program conceptual design and product development. Quarterly report, December 1, 1993--February 28, 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    GE has achieved a leadership position in the worldwide gas turbine industry in both industrial/utility markets and in aircraft engines. This design and manufacturing base plus our close contact with the users provides the technology for creation of the next generation advanced power generation systems for both the industrial and utility industries. GE has been active in the definition of advanced turbine systems for several years. These systems will leverage the technology from the latest developments in the entire GE gas turbine product line. These products will be USA based in engineering and manufacturing and are marketed through the GE Industrial and Power Systems. Achieving the advanced turbine system goals of 60% efficiency, 8 ppmvd NOx and 10% electric power cost reduction imposes competing characteristics on the gas turbine system. Two basic technical issues arise from this. The turbine inlet temperature of the gas turbine must increase to achieve both efficiency and cost goals. However, higher temperatures move in the direction of increased NOx emission. Improved coating and materials technologies along with creative combustor design can result in solutions to achieve the ultimate goal.

  3. Techno-stress: a prospective psychophysiological study of the impact of a controlled stress-reduction program in advanced telecommunication systems design work.

    Science.gov (United States)

    Arnetz, B B

    1996-01-01

    There is a void of studies concerning occupational health aspects from working with the most advanced forms of information technologies techniques such as are found in some of the world-renowned telecommunication systems development laboratories. However, many of these techniques will later be applied in the regular office environment. We wanted to identify some of the major stressors perceived by advanced telecommunication systems design employees and develop a valid and reliable instrument by which to monitor such stressors. We were also interested in assessing the impact of a controlled prospective stress-reduction program on perceived mental stress and specific psychophysiological parameters. A total of 116 employees were recruited. Sixty-one were offered to participate in one of three stress-reduction training programs (intervention group). The additional 50 functioned as a reference group. After a detailed baseline assessment, including a comprehensive questionnaire and psychophysiological measurements, new assessments were made at the end of the formal training program (+ 3 months) and after an additional 5-month period. Results reveal a significant improvement in the intervention group with regard to circulating levels of the stress-sensitive hormone prolactin as well as an attenuation in mental strain. Cardiovascular risk indicators were also improved. Circulating thrombocytes decreased in the intervention group. Type of stress-reduction programs chosen and intensity of participation did not significantly impact results. Coping style was not affected and no beneficial effects were observed with regard to the psychological characteristics of the work, eg intellectual discretion and control over work processes. The survey instrument is now being used in the continuous improvement of work processes and strategic leadership of occupational health issues. The results suggest that prior psychophysiological stress research, based on low- and medium-skill, rather

  4. Necessary but Not Sufficient: The Role of Policy for Advancing Programs of School, Family, and Community Partnerships

    Directory of Open Access Journals (Sweden)

    Joyce L. Epstein

    2016-09-01

    Full Text Available Since the release of Equality of Educational Opportunity, researchers have emphasized the importance of applying the results of research to policies for school improvement. Policies tell educators to do something, but not how to enact specific laws. This study analyzes data from 347 schools in 21 districts to identify variables that support the enactment of policies for parental engagement. We address research questions on how school and district practices affect the quality of school-based partnership programs. Our results indicate that a policy on parental involvement may be a good first step, but other factors—principals’ support for family and community engagement and active facilitation of research-based structures and processes by district leaders—are important for establishing a basic partnership program. These factors promote programs that engage all students’ families. Schools that take these steps have higher percentages of engaged families and report higher rates of average daily attendance among their students.

  5. Advanced gas cooled nuclear reactor materials evaluation and development program. Progress report, April 1--June 30, 1978

    Energy Technology Data Exchange (ETDEWEB)

    1978-08-31

    The objectives of the program are to evaluate candidate alloys for Very High Temperature Reactor Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the affect of simulated reactor primary coolant (Helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Work covered in the report includes the activities associated with the procurement of the materials for the screening test program, information from vendor certification for the materials receiver, and preliminary information from the materials characterization tests performed by General Electric. The construction status of the simulated reactor helium supply system, testing equipment, and gas chemistry analysis instrumentation and equipment are discussed. The status of the data management system is also reviewed.

  6. ["The Talpiot medical leadership program"--advancing the brightest young physicians and researchers to fill future leadership roles].

    Science.gov (United States)

    Adler, Yehuda; Kinori, Michael; Zimlichman, Eyal; Rosinger, Avivit; Shalev, Guzu; Talmi, Rachel; Noy, Shlomo; Rotstein, Zeev

    2015-02-01

    The modern medical world is dynamic and boundless. There is a need for the medical training system currently existing in Israel to undergo a thorough conceptual change in order to strive for excellence and innovation on the one hand and to prevent the "brain drain" from Israel on the other. To report on the "Talpiot" program at the "Sheba Medical Center", which identifies, promotes and prepares the most talented young doctors to fill key positions in the fields of medicine and health in Israel. This study is based on a project with the same name in the Israeli Defense Forces (IDF). It promotes an elite group of physicians and researchers at the medical center and includes the provision of scholarships, personal guidance and customized educational opportunities for its members. Conversely, every member in the program is committed to complete five years of training followed by another five years as a senior physician or a researcher at the medical center. Since 2002, there have been six cycles of "Talpionaires". The current 46 members of the program fill key leadership roles in the medical center and are considered leaders in their field. Among the program's alumni are managers of institutes, units and research institutes. This group is responsible for the publication of hundreds of scientific papers studies and dozens of patents in medical technology. Some of them have progressed academically far beyond their peers. Excellence programs are an integral part of any institution which considers itself a leader, both in medicine and beyond. The exciting and visionary "Talpiot" program is Sheba's contribution to the quality of the medical system in the country of Israel in the long run. Promoting young doctors and researchers to become leaders in the Israeli medical system is an integral part of national interests.

  7. Design Skills Education for Students of Advanced Course in College of Technology in Cooperation with the Support Program for Contemporary Educational Needs

    Science.gov (United States)

    Fujita, Naoyuki; Sakabe, Toshiya; Koshiba, Takashi; Ishitobi, Manabu

    Since 2004, Nara National College of Technology has been conducting “The Super Science Teacher Delivery Lecture Project”, in which the staff of our college visit elementary or junior high schools to provide special classes on science, technology or other subjects. This project was adopted as part of the Support Program for Contemporary Educational Needs by the Ministry of Education, Culture, Sports, Science and Technology. To provide education on design skills for students in the advanced mechanical engineering course and advanced electronic and information engineering course of the faculty of advanced engineering of our college, Problem Based Learning (PBL) has been conducted with the cooperation of the Super Science Teacher Delivery Lecture Project. In the PBL, students developed the teaching materials and experiments for science and technology lessons of elementary or junior high school students. In addition, the design skills of the students were evaluated by the reports on design skills, the demonstration of the delivery lecture and the records of the their efforts. From the results of the student questionnaire on this PBL, it is clear that most of the students understood “what are the design skills?” and acquired design skills.

  8. a History of Funding for WOMEN’S Programs at the National Science Foundation: from Individual Powre Approaches to the Advance of Institutional Approaches

    Science.gov (United States)

    Rosser, Sue V.; Lane, Eliesh O'neil

    The biennial reports on women, minorities, and persons with disabilities produced by the National Science Foundation (NSF) because of congressional mandate laid the statistical foundation for NSF initiatives to redress the underrepresentation of these groups. Programs established in the 1980s such as Research Opportunities for Women, Visiting Professorships for Women, Graduate Fellowships for Women, and Career Advancement Awards provided support to individual women for their research. In the 1990s, the NSF also began to focus on systemic initiatives, creating the Program for Women and Girls, although it continued to address the problem through support of individual researchers in the newly created Professional Opportunities for Women in Research and Education (POWRE) initiative. The responses from more than 400 awardees during the 4 years of POWRE provide insights into the current issues these women perceive surrounding their grants, funding, and interactions with NSF bureaucracy and staff members. The results of the POWRE survey support the institutional, systemic thrust of the NSF’s new ADVANCE initiative to attempt to solve problems such as balancing career and family that cannot be addressed solely by supporting research projects of individual female scientists and engineers.

  9. TP Atlas: integration and dissemination of advances in Targeted Proteins Research Program (TPRP)-structural biology project phase II in Japan.

    Science.gov (United States)

    Iwayanagi, Takao; Miyamoto, Sei; Konno, Takeshi; Mizutani, Hisashi; Hirai, Tomohiro; Shigemoto, Yasumasa; Gojobori, Takashi; Sugawara, Hideaki

    2012-09-01

    The Targeted Proteins Research Program (TPRP) promoted by the Ministry of Education, Culture, Sports, Science and Technology (MEXT) of Japan is the phase II of structural biology project (2007-2011) following the Protein 3000 Project (2002-2006) in Japan. While the phase I Protein 3000 Project put partial emphasis on the construction and maintenance of pipelines for structural analyses, the TPRP is dedicated to revealing the structures and functions of the targeted proteins that have great importance in both basic research and industrial applications. To pursue this objective, 35 Targeted Proteins (TP) Projects selected in the three areas of fundamental biology, medicine and pharmacology, and food and environment are tightly collaborated with 10 Advanced Technology (AT) Projects in the four fields of protein production, structural analyses, chemical library and screening, and information platform. Here, the outlines and achievements of the 35 TP Projects are summarized in the system named TP Atlas. Progress in the diversified areas is described in the modules of Graphical Summary, General Summary, Tabular Summary, and Structure Gallery of the TP Atlas in the standard and unified format. Advances in TP Projects owing to novel technologies stemmed from AT Projects and collaborative research among TP Projects are illustrated as a hallmark of the Program. The TP Atlas can be accessed at http://net.genes.nig.ac.jp/tpatlas/index_e.html .

  10. Do Scaffolding Tools Improve Reflective Writing in Professional Portfolios? A Content Analysis of Reflective Writing in an Advanced Preparation Program

    Science.gov (United States)

    Houston, Cynthia R.

    2016-01-01

    Reflective practice is an important skill that teachers must develop to be able to assess the effectiveness of their teaching and modify their instructional behavior. In many education programs reflective narratives, which are often part of teaching portfolios, are intended to assess students' abilities in these areas. Research on reflectivity in…

  11. Water Quality Assessment Simulation Program (WASP8): Upgrades to the Advanced Toxicant Module for Simulating Dissolved Chemicals, Nanomaterials, and Solids

    Science.gov (United States)

    The Water Quality Analysis Simulation Program (WASP) is a dynamic, spatially-resolved, differential mass balance fate and transport modeling framework. WASP is used to develop models to simulate concentrations of environmental contaminants in surface waters and sediments. As a mo...

  12. Advanced theoretical and experimental studies in automatic control and information systems. [including mathematical programming and game theory

    Science.gov (United States)

    Desoer, C. A.; Polak, E.; Zadeh, L. A.

    1974-01-01

    A series of research projects is briefly summarized which includes investigations in the following areas: (1) mathematical programming problems for large system and infinite-dimensional spaces, (2) bounded-input bounded-output stability, (3) non-parametric approximations, and (4) differential games. A list of reports and papers which were published over the ten year period of research is included.

  13. Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development Program. Progress report, July 1, 1980-September 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-12-12

    Objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the effect of simulated reactor primary coolant (helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Work covered in this report includes the activities associated with the status of the simulated reactor helium supply system, testing equipment and gas chemistry analysis instrumentation and equipment. The progress in the screening test program is described: screening creep results and metallographic analysis for materials thermally exposed or tested at 750, 850, 950 and 1050/sup 0/C. Initiation of controlled purity helium creep-rupture testing in the intensive screening test program is discussed. In addition, the results of 1000-hour exposures at 750 and 850/sup 0/C on several experimental alloys are discussed.

  14. Advanced gas cooled nuclear reactor materials evaluation and development program. Progress report, July 1, 1977--September 30, 1977

    Energy Technology Data Exchange (ETDEWEB)

    1977-11-14

    Work covered includes an updated listing of the alloys selected for the screening tests, plus complete test specimen matrices for the screening program. The present design and construction status of the simulated reactor helium loops and testing and analysis facilities and equipment are discussed. Also covered are the loading matrices for the screening creep tests.

  15. Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development Program. Progress report, April 1, 1980-June 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-11-14

    Objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor (VHTR) Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the effect of simulated reactor primary coolant (helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Work covered in this report includes the activities associated with the status of the simulated reactor helium supply system, testing equipment and gas chemistry analysis instrumentation and equipment. The progress in the screening test program is described; this includes: screening creep results and metallographic analysis for materials thermally exposed or tested at 750, 850 and 950/sup 0/C. The initiation of air creep-rupture testing in the intensive screening test program is discussed. In addition, the status of the data management system is described.

  16. Light Water Reactor Sustainability Program Risk Informed Safety Margin Characterization (RISMC) Advanced Test Reactor Demonstration Case Study

    Energy Technology Data Exchange (ETDEWEB)

    Curtis Smith; David Schwieder; Cherie Phelan; Anh Bui; Paul Bayless

    2012-08-01

    Safety is central to the design, licensing, operation, and economics of Nuclear Power Plants (NPPs). Consequently, the ability to better characterize and quantify safety margin holds the key to improved decision making about LWR design, operation, and plant life extension. A systematic approach to characterization of safety margins and the subsequent margins management options represents a vital input to the licensee and regulatory analysis and decision making that will be involved. The purpose of the RISMC Pathway R&D is to support plant decisions for risk-informed margins management with the aim to improve economics, reliability, and sustain safety of current NPPs. Goals of the RISMC Pathway are twofold: (1) Develop and demonstrate a risk-assessment method coupled to safety margin quantification that can be used by NPP decision makers as part of their margin recovery strategies. (2) Create an advanced “RISMC toolkit” that enables more accurate representation of NPP safety margin. This report describes the RISMC methodology demonstration where the Advanced Test Reactor (ATR) was used as a test-bed for purposes of determining safety margins. As part of the demonstration, we describe how both the thermal-hydraulics and probabilistic safety calculations are integrated and used to quantify margin management strategies.

  17. Developing the role of Swedish advanced practice nurse (APN) through a blended learning master's program: Consequences of knowledge organisation.

    Science.gov (United States)

    Bergström, Peter; Lindh, Viveca

    2017-11-07

    This paper reports on a research study conducted with a group of nurses in Sweden enrolled in a newly developed blended learning master's programme to become advanced practice nurses (APNs). As background, the paper presents the regional needs the programme is intended to address and describes how the programme was designed. The aim was to understand how, from students' perspective, the nurse master's programme structured knowledge for their future position as APNs. The research question focuses on how the master's programme prepares students by meeting their diverse needs for knowledge. Empirical material was collected at two times during the students' first and second years of study through semi-structured qualitative interviews. The findings highlight the process in which these master's students gained a more advanced identity of becoming APNs. This process demonstrates how students perceive their current position as nurses based on a discourse of knowledge in relation to the practical and theoretical knowledge they encounter in the master's programme. This article concludes by recommending that attention should be paid to developing APN role models in the current Swedish healthcare system. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development Program. Quarterly progress report, April 1, 1977--June 30, 1977

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-01

    The objectives of this program are to evaluate candidate alloys of Very High Temperature Reactor (VHTR) Process Heat and Direct Cycle helium Turbine (DCHT) applications, in terms of the effects of simulated reactor primary coolant (impure helium), high temperatures, and long time exposures on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Work covered in the report includes completion of alloy selection for the screening tests. The alloys selected for potential VHTR Nuclear Process Heat (NPH) applications and for potential DCHT applications are listed. The present status on the simulated reactor helium loop design and construction and the design and construction progress on the testing and analysis facilities and equipment are discussed.

  19. Advanced gas cooled nuclear reactor materials evaluation and development program. Progress report, October 1, 1979-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-04-18

    This report presents the results of work performed from October 1, 1979 through December 31, 1979. Work covered in this report includes the activities associated with the status of the simulated reactor helium supply system, testing equipment and gas chemistry analysis instrumentation and equipment. The progress in the screening test program is described. This includes: screening creep results, weight gain and post-exposure mechanical properties for materials thermally exposed at 750/sup 0/ and 850/sup 0/C (1382/sup 0/ and 1562/sup 0/F). In addition, the status of the data management system is described.

  20. Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development Program. Progress report, January 1, 1978--March 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    1978-06-26

    The activities associated with the procurement of the materials for the screening test program, information from vendor certification for the materials received, and preliminary information from the materials characterization tests performed by GE are reported. The construction status of the simulated reactor helium supply system, testing equipment, and gas chemistry analysis instrumentation and equipment are discussed. The final recommended impurity levels for the screening phase helium are presented and the rational behind this gas chemistry is discussed. The status of the data management system is presented.

  1. Study of program defects of 22nm nanoimprint template with an advanced e-beam inspection system

    Science.gov (United States)

    Hiraka, Takaaki; Mizuochi, Jun; Nakanishi, Yuko; Yusa, Satoshi; Sasaki, Shiho; Kurihara, Masaaki; Toyama, Nobuhito; Morikawa, Yasutaka; Mohri, Hiroshi; Hayashi, Naoya; Xiao, Hong; Kuan, Chiyan; Wang, Fei; Ma, Long; Zhao, Yan; Jau, Jack

    2009-10-01

    Nanoimprint lithography (NIL) is a candidate of alternative, low cost of ownership lithography solution for deep nano-meter device manufacturing12. For the NIL template pattern making, we have been developing the processes with 100keV SB EB writer and 50keV VSB EB writer to achieve the fine resolution of near 20nm1-7. However, inspection of nanoimprint template posed a big challenge to inspection system due to the small geometry, 1x comparing to 4x of Optical mask and EUV mask. Previous studies of nanoimprint template inspection were performed indirectly on a stamped wafer and/or on a round quartz wafer13. Electron beam inspection (EBI) systems have been widely used in semiconductor fabs in nanometer technology nodes. Most commonly EBI applications are electrical defects, or voltage contrast (VC) defects detection and monitoring8-11. In this study, we used a mask EBI system developed by Hermes Microvision, Inc. (HMI) to directly inspect a NIL template with line/space and hole patterns half pitched from 22nm to 90nm and with program defects sized from 4nm to 92nm. Capability of inspection with 10nm pixel size has been demonstrated and capability of capturing program defects sized 12nm and smaller has been shown. This study proved the feasibility of EBI as inspection solution of nanoimprint template for 22nmHP and beyond.

  2. Advanced gas cooled nuclear reactor materials evaluation and development program. Progress report, April 1, 1982-June 30, 1982

    Energy Technology Data Exchange (ETDEWEB)

    1982-10-01

    Work covered in this report includes the activities associated with the status of the simulated reactor helium supply systems and testing equipment. The progress in the screening test program is described; this includes screening creep results and metallographic analyses for materials thermally exposed or tested at 750/sup 0/, 850/sup 0/, 950/sup 0/ and 1050/sup 0/C (1382/sup 0/, 1562/sup 0/, 1742/sup 0/ and 1922/sup 0/F) in controlled-purity helium. The status of creep-rupture in controlled-purity helium and air and fatigue testing in controlled-purity helium and air in the intensive screening test program is discussed. The results of metallographic studies of corrosion pins exposed at 750/sup 0/C for 6000 hours in controlled-purity helium (solid solution strengthened alloys, centrifugally cast alloys and an iron-base oxide dispersion strengthened alloy) are presented and discussed. The results of metallographic studies on the same materials after 10,000 hour exposure in controlled-purity helium at 850/sup 0/C are also presented.

  3. Advances in rapid identification and susceptibility testing of bacteria in the clinical microbiology laboratory: implications for patient care and antimicrobial stewardship programs

    Directory of Open Access Journals (Sweden)

    Florian P. Maurer

    2017-03-01

    Full Text Available Early availability of information on bacterial pathogens and their antimicrobial susceptibility is of key importance for the management of infectious diseases patients. Currently, using traditional approaches, it usually takes at least 48 hours for identification and susceptibility testing of bacterial pathogens. Therefore, the slowness of diagnostic procedures drives prolongation of empiric, potentially inappropriate, antibacterial therapies. Over the last couple of years, the improvement of available techniques (e.g. for susceptibility testing, DNA amplification assays, and introduction of novel technologies (e.g. MALDI-TOF has fundamentally changed approaches towards pathogen identification and characterization. Importantly, these techniques offer increased diagnostic resolution while at the same time shorten the time-to-result, and are thus of obvious importance for antimicrobial stewardship. In this review, we will discuss recent advances in medical microbiology with special emphasis on the impact of novel techniques on antimicrobial stewardship programs.

  4. Advances in Rapid Identification and Susceptibility Testing of Bacteria in the Clinical Microbiology Laboratory: Implications for Patient Care and Antimicrobial Stewardship Programs.

    Science.gov (United States)

    Maurer, Florian P; Christner, Martin; Hentschke, Moritz; Rohde, Holger

    2017-03-30

    Early availability of information on bacterial pathogens and their antimicrobial susceptibility is of key importance for the management of infectious diseases patients. Currently, using traditional approaches, it usually takes at least 48 hours for identification and susceptibility testing of bacterial pathogens. Therefore, the slowness of diagnostic procedures drives prolongation of empiric, potentially inappropriate, antibacterial therapies. Over the last couple of years, the improvement of available techniques (e.g. for susceptibility testing, DNA amplification assays), and introduction of novel technologies (e.g. MALDI-TOF) has fundamentally changed approaches towards pathogen identification and characterization. Importantly, these techniques offer increased diagnostic resolution while at the same time shorten the time-to-result, and are thus of obvious importance for antimicrobial stewardship. In this review, we will discuss recent advances in medical microbiology with special emphasis on the impact of novel techniques on antimicrobial stewardship programs.

  5. The frequency of alcoholism in patients with advanced cancer admitted to an acute palliative care unit and a home care program.

    Science.gov (United States)

    Mercadante, Sebastiano; Porzio, Giampiero; Caruselli, Amanda; Aielli, Federica; Adile, Claudio; Girelli, Nicola; Casuccio, Alessandra

    2015-02-01

    Cancer patients with a history of alcoholism may be problematic. The frequency of alcoholism among patients with advanced cancer has never been reported in Italy or other European countries. The aim of this prospective study was to determine the frequency of alcoholism, assessed with a simple and validated instrument, among patients with advanced cancer who were referred to two different palliative care settings: an acute inpatient palliative care unit (PCU) of a comprehensive cancer center in a metropolitan area and a home care program (HCP) in a territorial district, localized in the mountains of Italy. A consecutive sample of patients admitted to an inpatient PCU and to an HCP was assessed for a period of eight months. Each patient who agreed to be interviewed completed the Cut down, Annoyed, Guilty, Eye-opener (CAGE) questionnaire. Patients were then interviewed informally to gather information about their history with alcohol. In total, 443 consecutive patients were surveyed; data from 249 to 194 patients were collected in the PCU and HCP, respectively, in the eight-month period. The mean age was 66.4 (SD 12.7) years, and 207 were males. The mean Karnofsky level was 54.2 (SD 14.6). Eighteen patients were CAGE positive (4.06%). Males (Pearson Chi-squared, P = 0.027) and younger patients (analysis of variance test, P = 0.009) were more likely to be CAGE positive. Informal interviews revealed that 17 patients (3.83%) were alcoholics or had a history of alcoholism, and that alcoholism was strongly correlated with CAGE (Pearson Chi-squared, P alcoholism. As CAGE patients express more symptom distress, it is important to detect this problem with a simple tool that has a high sensitivity and specificity and is easy to use even in patients with advanced disease. Copyright © 2015 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

  6. Optimization of Mud Hammer Drilling Performance--A Program to Benchmark the Viability of Advanced Mud Hammer Drilling

    Energy Technology Data Exchange (ETDEWEB)

    Arnis Judzis

    2006-03-01

    Operators continue to look for ways to improve hard rock drilling performance through emerging technologies. A consortium of Department of Energy, operator and industry participants put together an effort to test and optimize mud driven fluid hammers as one emerging technology that has shown promise to increase penetration rates in hard rock. The thrust of this program has been to test and record the performance of fluid hammers in full scale test conditions including, hard formations at simulated depth, high density/high solids drilling muds, and realistic fluid power levels. This paper details the testing and results of testing two 7 3/4 inch diameter mud hammers with 8 1/2 inch hammer bits. A Novatek MHN5 and an SDS Digger FH185 mud hammer were tested with several bit types, with performance being compared to a conventional (IADC Code 537) tricone bit. These tools functionally operated in all of the simulated downhole environments. The performance was in the range of the baseline ticone or better at lower borehole pressures, but at higher borehole pressures the performance was in the lower range or below that of the baseline tricone bit. A new drilling mode was observed, while operating the MHN5 mud hammer. This mode was noticed as the weight on bit (WOB) was in transition from low to high applied load. During this new ''transition drilling mode'', performance was substantially improved and in some cases outperformed the tricone bit. Improvements were noted for the SDS tool while drilling with a more aggressive bit design. Future work includes the optimization of these or the next generation tools for operating in higher density and higher borehole pressure conditions and improving bit design and technology based on the knowledge gained from this test program.

  7. The North Carolina Field Test: Field Performance of the Preliminary Version of an Advanced Weatherization Audit for the Department of Energy's Weatherization Assistance Program

    Energy Technology Data Exchange (ETDEWEB)

    Sharp, T.R.

    1994-01-01

    The field performance of weatherizations based on a newly-developed advanced technique for selecting residential energy conservation measures was tested alongside current Retro-Tech-based weatherizations in North Carolina. The new technique is computer-based and determines measures based on the needs of an individual house. In addition, it recommends only those measures that it determines will have a benefit-to-cost ratio greater than 1 for the house being evaluated. The new technique also considers the interaction of measures in computing the benefit-to-cost ratio of each measure. The two weatherization approaches were compared based on implementation ease, measures installed, labor and cost requirements, and both heating and cooling energy savings achieved. One-hundred and twenty houses with the following characteristics participated: the occupants were low-income, eligible for North Carolina's current weatherization program, and responsible for their own fuel and electric bills. Houses were detached single-family dwellings, not mobile homes; were heated by kerosene, fuel oil, natural gas, or propane; and had one or two operating window air conditioners. Houses were divided equally into one control group and two weatherization groups. Weekly space heating and cooling energy use, and hourly indoor and outdoor temperatures were monitored between November 1989 and September 1990 (pre-period) and between December 1990 and August 1991 (post-period). House consumption models were used to normalize for annual weather differences and a 68 F indoor temperature. Control group savings were used to adjust the savings determined for the weatherization groups. The two weatherization approaches involved installing attic and floor insulations in near equivalent quantities, and installing storm windows and wall insulation in drastically different quantities. Substantial differences also were found in average air leakage reductions for the two weatherization groups. Average

  8. Effect of an Advanced Pharmacy Practice Experience on Medication Therapy Management Services in a Centralized Retail Pharmacy Program.

    Science.gov (United States)

    Vande Griend, Joseph P; Rodgers, Melissa; Nuffer, Wesley

    2017-05-01

    Medication therapy management (MTM) delivery is increasingly important in managed care. Successful delivery positively affects patient health and improves Centers for Medicare & Medicaid Services star ratings, a measure of health plan quality. As MTM services continue to grow, there is an increased need for efficient and effective care models. The primary objectives of this project were to describe the delivery of MTM services by fourth-year Advanced Pharmacy Practice Experience (APPE) students in a centralized retail pharmacy system and to evaluate and quantify the clinical and financial contributions of the students. The secondary objective was to describe the engagement needed to complete comprehensive medication reviews (CMRs) and targeted interventions. From May 2015 to December 2015, thirty-five APPE students from the University of Colorado Skaggs School of Pharmacy provided MTM services at Albertsons Companies using the OutcomesMTM and Mirixa platforms. Students delivered patient care services by phone at the central office and provided face-to-face visits at pharmacies in the region. With implementation of the MTM APPE in 2015, the team consisted of 2 MTM pharmacists and pharmacy students, as compared with 1 MTM pharmacist in 2014. The number of CMRs and targeted interventions completed and the estimated additional revenue generated during the 2015 time period were compared with those completed from May through December 2014. The patient and provider engagement needed to complete the CMRs and targeted interventions was summarized. 125 CMRs and 1,918 targeted interventions were billed in 2015, compared with 13 CMRs and 767 targeted interventions in 2014. An estimated $16,575-$49,272 of additional revenue was generated in 2015. To complete the interventions in 2015, the team engaged in 1,714 CMR opportunities and 4,686 targeted intervention opportunities. In this MTM rotation, students provided real-life care to patients, resulting in financial and clinical

  9. Advanced technology development program for lithium-ion batteries : thermal abuse performance of 18650 Li-ion cells.

    Energy Technology Data Exchange (ETDEWEB)

    Crafts, Chris C.; Doughty, Daniel Harvey; McBreen, James. (Bookhaven National Lab, Upton, NY); Roth, Emanuel Peter

    2004-03-01

    Li-ion cells are being developed for high-power applications in hybrid electric vehicles currently being designed for the FreedomCAR (Freedom Cooperative Automotive Research) program. These cells offer superior performance in terms of power and energy density over current cell chemistries. Cells using this chemistry are the basis of battery systems for both gasoline and fuel cell based hybrids. However, the safety of these cells needs to be understood and improved for eventual widespread commercial application in hybrid electric vehicles. The thermal behavior of commercial and prototype cells has been measured under varying conditions of cell composition, age and state-of-charge (SOC). The thermal runaway behavior of full cells has been measured along with the thermal properties of the cell components. We have also measured gas generation and gas composition over the temperature range corresponding to the thermal runaway regime. These studies have allowed characterization of cell thermal abuse tolerance and an understanding of the mechanisms that result in cell thermal runaway.

  10. Psi4 1.1: An Open-Source Electronic Structure Program Emphasizing Automation, Advanced Libraries, and Interoperability.

    Science.gov (United States)

    Parrish, Robert M; Burns, Lori A; Smith, Daniel G A; Simmonett, Andrew C; DePrince, A Eugene; Hohenstein, Edward G; Bozkaya, Uğur; Sokolov, Alexander Yu; Di Remigio, Roberto; Richard, Ryan M; Gonthier, Jérôme F; James, Andrew M; McAlexander, Harley R; Kumar, Ashutosh; Saitow, Masaaki; Wang, Xiao; Pritchard, Benjamin P; Verma, Prakash; Schaefer, Henry F; Patkowski, Konrad; King, Rollin A; Valeev, Edward F; Evangelista, Francesco A; Turney, Justin M; Crawford, T Daniel; Sherrill, C David

    2017-07-11

    Psi4 is an ab initio electronic structure program providing methods such as Hartree-Fock, density functional theory, configuration interaction, and coupled-cluster theory. The 1.1 release represents a major update meant to automate complex tasks, such as geometry optimization using complete-basis-set extrapolation or focal-point methods. Conversion of the top-level code to a Python module means that Psi4 can now be used in complex workflows alongside other Python tools. Several new features have been added with the aid of libraries providing easy access to techniques such as density fitting, Cholesky decomposition, and Laplace denominators. The build system has been completely rewritten to simplify interoperability with independent, reusable software components for quantum chemistry. Finally, a wide range of new theoretical methods and analyses have been added to the code base, including functional-group and open-shell symmetry adapted perturbation theory, density-fitted coupled cluster with frozen natural orbitals, orbital-optimized perturbation and coupled-cluster methods (e.g., OO-MP2 and OO-LCCD), density-fitted multiconfigurational self-consistent field, density cumulant functional theory, algebraic-diagrammatic construction excited states, improvements to the geometry optimizer, and the "X2C" approach to relativistic corrections, among many other improvements.

  11. Advances and Challenges in Public Policies and Programs to Prevent Discrimination in the Governmental Sphere. The Paped's Case, Mexico

    Directory of Open Access Journals (Sweden)

    Ernesto Treviño Ronzón

    2017-09-01

    Full Text Available This article discusses some of the challenges implied in the task of implementing and evaluating actions to prevent and eradicate discrimination in the government sector. It is to recognize that in Mexico the task is in the making and follows patterns of unequal development, although it is widely legislated. For this discussion, we introduce contextual references about the implementation of reforms in favor of human rights in Mexico, and we articulate them with the notion of public policies. Then, we take as reference the case of the “Program to Prevent and Eliminate Discrimination” in the Mexico City (PAPED. We argue that, in contexts such as the Mexican, marked by multidimensional violence, corruption, and a poor performance of public institutions, it is necessary to increase the reflexivity of the instances that must implement actions of non-discrimination, as well as to increase this reflexivity in the transparency and visibility of evaluation exercises of their anti-discrimination actions, so as to reach more people and produce progressive movements of appropriation.

  12. Advanced Seismic Data Analysis Program (The Hot Pot Project), DOE Award: DE-EE0002839, Phase 1 Report

    Energy Technology Data Exchange (ETDEWEB)

    Oski Energy, LLC,

    2013-03-28

    A five-line (23 mile) reflection- seismic survey was conducted at the Hot Pot geothermal prospect area in north-central Nevada under the USDOE (United States Department of Energy) Geothermal Technologies Program. The project objective was to utilize innovative seismic data processing, integrated with existing geological, geophysical and geochemical information, to identify high-potential drilling targets and to reduce drilling risk. Data acquisition and interpretation took place between October 2010 and April 2011. The first round of data processing resulted in large areas of relatively poor data, and obvious reflectors known from existing subsurface information either did not appear on the seismic profiles or appeared at the wrong depth. To resolve these issues, the velocity model was adjusted to include geologic input, and the lines were reprocessed. The resulting products were significantly improved, and additional detail was recovered within the high-velocity and in part acoustically isotropic basement. Features visible on the improved seismic images include interpreted low angle thrust faults within the Paleozoic Valmy Formation, which potentially are reactivated in the current stress field. Intermediate-depth wells are currently targeted to test these features. The seismic images also suggest the existence of Paleogene sedimentary and volcanic rocks which potentially may function as a near- surface reservoir, charged by deeper structures in Paleozoic rocks.

  13. Enhancing psychosocial and spiritual palliative care: Four-year results of the program of comprehensive care for people with advanced illnesses and their families in Spain.

    Science.gov (United States)

    Gómez-Batiste, Xavier; Mateo-Ortega, Dolors; Lasmarías, Cristina; Novellas, Anna; Espinosa, Jose; Beas, Elba; Ela, Sara; Barbero, Javier

    2017-02-01

    We aimed to describe the overall quantitative and qualitative results of a "La Caixa" Foundation and World Health Organization Collaborating Center Program entitled "Comprehensive Care for Patients with Advanced Illnesses and their Families" after four years of experience. Qualitative and quantitative methods were employed to assess the program. Quasiexperimental, prospective, multicenter, single-group, and pretest/posttest methods were utilized to assess the quantitative data. The effectiveness of psychosocial interventions was assessed at baseline (visit 1) and after four follow-up visits. The following dimensions were assessed: mood state, discomfort, anxiety, degree of adjustment or adaptation to disease, and suffering. We also assessed the four dimensions of the spiritual pain scale: faith or spiritual beliefs, valuable faith or spiritual beliefs, meaning in life, and peace of mind/forgiveness. Qualitative analyses were performed via surveys to evaluate stakeholder satisfaction. We built 29 psychosocial support teams involving 133 professionals-mainly psychologists and social workers. During the study period, 8,964 patients and 11,810 family members attended. Significant improvements were observed in the psychosocial and spiritual dimensions assessed. Patients, family members, and stakeholders all showed high levels of satisfaction. This model of psychosocial care could serve as an example for other countries that wish to improve psychosocial and spiritual support. Our results confirm that specific psychosocial interventions delivered by well-trained experts can help to ease suffering and discomfort in end-of-life and palliative care patients, particularly those with high levels of pain or emotional distress.

  14. Gas turbine and advanced HTGR materials screening test program: 10,000-hour results and semiannual progress report for the period ending March 31, 1977

    Energy Technology Data Exchange (ETDEWEB)

    Rosenwasser, S.N.; Johnson, W.R.

    1977-07-01

    Work on the Gas-Turbine and Advanced High-Temperature Gas-Cooled Reactor (HTGR) Materials Screening Test Program is documented. Emphasis is on the results and analyses of creep data to 11,000 hr and the detailed metallurgical evaluations performed on candidate alloy specimens tested for up to 10,000 hr. Long-term creep and unstressed aging data in controlled-impurity helium and in air at 650, 800, and 900/sup 0/C are reported for the original alloys in the program, including the vacuum-cast Ni-base superalloys, IN 100, Rene 100, IN 713, MM 004, M 21, and IN 738; the wrought solid-solution-strengthened Ni--Cr alloys, Hastelloy X and Inconel 617; the centrifugally-cast austenitic Fe--Ni--Cr alloy, IN 519; the oxide-dispersion-strengthened (ODS) Ni--Cr alloys, MA 753 and MA 754; and the wrought Mo-base alloy, MoTZM. Results at 650/sup 0/C and 10,000 hr for the precipitation-strengthened alloys Inconel 718, Inconel 706, and A 286 are also included. Similar, but much shorter term data at 800, 900, and 1000/sup 0/C for the recently added wrought alloys Hastelloy X (second heat), Hastelloy S, RA 333, and HD 556, and the additional centrifugally-cast alloys HK 40, Supertherm, Manaurite 36X, Manaurige 36XS, and Manaurite 900, are also reported.

  15. Telemedicine delivery of patient education in remote Ontario communities: feasibility of an Advanced Clinician Practitioner in Arthritis Care (ACPAC-led inflammatory arthritis education program

    Directory of Open Access Journals (Sweden)

    Warmington K

    2017-02-01

    Full Text Available Kelly Warmington,1 Carol Flewelling,2 Carol A Kennedy,3,4 Rachel Shupak,5 Angelo Papachristos,5 Caroline Jones,5 Denise Linton,3 Dorcas E Beaton,3,4,6–8 Sydney Lineker9 1Learning Institute, The Hospital for Sick Children, 2Telemedicine Program, 3Musculoskeletal Health & Outcomes Research, St. Michael’s Hospital, 4Institute for Work & Health, 5Martin Family Centre for Arthritis Care & Research, St. Michael’s Hospital, 6Graduate Department of Health Policy, Management and Evaluation, 7Graduate Department of Rehabilitation Science, 8Department of Occupational Science and Occupational Therapy, University of Toronto, 9The Arthritis Society (Ontario Division, Toronto, ON, Canada Objective: Telemedicine-based approaches to health care service delivery improve access to care. It was recognized that adults with inflammatory arthritis (IA living in remote areas had limited access to patient education and could benefit from the 1-day Prescription for Education (RxEd program. The program was delivered by extended role practitioners with advanced training in arthritis care. Normally offered at one urban center, RxEd was adapted for videoconference delivery through two educator development workshops that addressed telemedicine and adult education best practices. This study explores the feasibility of and participant satisfaction with telemedicine delivery of the RxEd program in remote communities.Materials and methods: Participants included adults with IA attending the RxEd program at one of six rural sites. They completed post-course program evaluations and follow-up interviews. Educators provided post-course feedback to identify program improvements that were later implemented.Results: In total, 123 people (36 in-person and 87 remote, across 6 sites participated, attending one of three RxEd sessions. Remote participants were satisfied with the quality of the videoconference (% agree/strongly agree: could hear the presenter (92.9% and discussion

  16. Advanced Missile Signature Center

    Data.gov (United States)

    Federal Laboratory Consortium — The Advanced Missile Signature Center (AMSC) is a national facility supporting the Missile Defense Agency (MDA) and other DoD programs and customers with analysis,...

  17. Program specialization

    CERN Document Server

    Marlet, Renaud

    2013-01-01

    This book presents the principles and techniques of program specialization - a general method to make programs faster (and possibly smaller) when some inputs can be known in advance. As an illustration, it describes the architecture of Tempo, an offline program specializer for C that can also specialize code at runtime, and provides figures for concrete applications in various domains. Technical details address issues related to program analysis precision, value reification, incomplete program specialization, strategies to exploit specialized program, incremental specialization, and data speci

  18. Nutritional status and feeding-tube placement in patients with locally advanced hypopharyngeal cancer included in an induction chemotherapy-based larynx preservation program.

    Science.gov (United States)

    Bozec, Alexandre; Benezery, Karen; Chamorey, Emmanuel; Ettaiche, Marc; Vandersteen, Clair; Dassonville, Olivier; Poissonnet, Gilles; Riss, Jean-Christophe; Hannoun-Lévi, Jean-Michel; Chand, Marie-Eve; Leysalle, Axel; Saada, Esma; Sudaka, Anne; Haudebourg, Juliette; Hebert, Christophe; Falewee, Marie-Noelle; Demard, François; Santini, José; Peyrade, Frédéric

    2016-09-01

    The objective of the study is to evaluate the nutritional status and determine its impact on clinical outcomes in patients with locally advanced hypopharyngeal cancer included in an induction chemotherapy (ICT)-based larynx preservation program without prophylactic feeding-tube placement. All patients with locally advanced (T3/4, N0-3, M0) hypopharyngeal squamous cell carcinoma, technically suitable for total pharyngolaryngectomy, treated by docetaxel, cisplatin and 5-fluorouracil (TPF)-ICT for larynx preservation at our institution between 2004 and 2013, were included in this retrospective study. Patients' nutritional status was closely monitored. Enteral nutrition was used if and when a patient was unable to sustain per-oral nutrition and hydration. The impact of nutritional status on clinical outcomes was investigated in univariate and multivariate analysis. A total of 53 patients (42 men and 11 women, mean age = 58.6 ± 8.2 years) were included in this study. Six (11.3 %) patients had lost more than 10 % of their usual body weight before therapy. Compared with patients' usual weight, the mean maximum patient weight loss during therapeutic management was 8.7 ± 4.5 kg. Enteral nutrition was required in 17 patients (32 %). We found no influence of the tested nutritional status-related factors on response to ICT, toxicity of ICT, overall, cause-specific and recurrence-free survival, and on post-therapeutic swallowing outcome. Maximum weight loss was significantly associated with a higher risk of enteral tube feeding during therapy (p = 0.03) and of complications (grade ≥3, p = 0.006) during RT. Without prophylactic feeding-tube placement, approximately one-third of the patients required enteral nutrition. There was no significant impact of nutritional status on oncologic or functional outcomes.

  19. Taming Typhon: Advancing Climate Literacy by Coordinating Federal Earth System Science Education Investments Through the U.S. Climate Change Science Program

    Science.gov (United States)

    Karsten, J. L.; Niepold, F.; Wei, M.; Waple, A. M.

    2008-12-01

    Thirteen Federal agencies in the United States invest in research, communication, and education activities related to climate and global change. The U.S. Climate Change Science Program (CCSP) works to integrate the research activities of these different agencies, with oversight from the Office of Science and Technology Policy, the Council on Environmental Quality, the National Economic Council and the Office of Management and Budget. The CCSP is the result of a Presidential initative in 2001 to build on the Global Change Research Program, which exists as a result of the Global Change Research Act of 1990. This initiative was to shift the focus of the Program from 'discovery and characterization' to 'differentiation and strategy investigation.' With this shift, CCSP's focus is now on evaluating optimal strategies for addressing climate change risks, improving coordination among the Federal agencies, communicating research results to all stakeholders (including national policy leaders and local resource managers), and improving public debate and decision-making related to global change. Implicit to these activities is the need to educate the general public about the science of climate change and its consequences, as well as coordinate Federal investments related to climate change education. This is no small task, given the variety of missions and approaches of the participating agencies. Recognizing that its Communications Interagency Working Group (CIWG) does not have the expertise or focus to adequately address issues related to science education, the CCSP recently established an ad-hoc Education Interagency Working Group (EIWG), comprising representatives from all 13 agencies, that will work closely with the CIWG to enhance education goals. Its mission is to advance literacy in climate and related sciences and increase informed decision making for the Nation. The EIWG envisions that its primary activities in the near-term will be focused on establishing: (1) a

  20. Ostomy Home Skills Program

    Medline Plus

    Full Text Available ... for Excellence in Trauma Surgery Advanced Trauma Life Support Verification, Review, and Consultation Program for Hospitals Trauma ... Skills for Exposure in Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills for ...

  1. Ostomy Home Skills Program

    Medline Plus

    Full Text Available ... Mentoring for Excellence in Trauma Surgery Advanced Trauma Life Support Verification, Review, and Consultation Program for Hospitals ... Surgical Skills for Exposure in Trauma Advanced Trauma Life Support Advanced Trauma Operative Management Basic Endovascular Skills ...

  2. Breeding Value of Cocoa (Theobroma cacao L. for Pod and Bean Traits: A Consequential Advance in Nigerian Cocoa Breeding Program

    Directory of Open Access Journals (Sweden)

    Daniel Babasola ADEWALE

    2014-06-01

    Full Text Available The understanding of the generated hybrids’ breeding value gives a measure of probable advances in a breeding program. Four cocoa genotypes (testers were crossed with two distinct lines (T65/7 and T86/2. The parents and the hybrids were separately established in randomized complete block design with six replications. The fourteen genotypes were evaluated for pod length (PL, weight (PW, beans/pod (NoB, bean length (BL, width (Bwi and thickness (BT. The treatment, parent, crosses and Line x Tester sources of variation were significant (P ≤ 0.05. Hybrids from the same maternal parent differed significantly (P < 0.05 for the six traits. Contribution to the total variance of PL, PW and Bwi were in the following order: Tester > Line x Tester > Lines. The highest general combining ability (0.42 occurred in T65/7 for PW; the least (-0.081 occurred in T86/2 for PL. Cross combination T65/7xT57/22 produced the highest specific ability of combination (4.33 for NoB. Variance of GCA and SCA were significant (P < 0.05 for the six traits. The GCA/SCA ratios revealed the inheritance of PL, PW, Bwi and BT to be additive. Non-additive gene effect controlled NoB and BL. Heterosis for the six traits ranged between -17.82% for BT (T65/7xT57/22 to 52.40% for PW (T65/7xT53/8. Increased productivity in cocoa is possible through hybrid breeding programs.

  3. SU-C-BRD-05: Implementation of Incident Learning in the Safety and Quality Management of Radiotherapy: The Primary Experience in a New Established Program with Advanced Techniques

    Energy Technology Data Exchange (ETDEWEB)

    Yang, R; Wang, J [Peking University Third Hospital, Beijing, Beijing (China)

    2014-06-15

    Purpose: To explore the implementation and effectiveness of incident learning for the safety and quality of radiotherapy in a new established radiotherapy program with advanced technology. Methods: Reference to the consensus recommendations by American Association of Physicist in Medicine, an incident learning system was specifically designed for reporting, investigating, and learning of individual radiotherapy incidents in a new established radiotherapy program, with 4D CBCT, Ultrasound guided radiotherapy, VMAT, gated treatment delivered on two new installed linacs. The incidents occurring in external beam radiotherapy from February, 2012 to January, 2014 were reported. Results: A total of 33 reports were analyzed, including 28 near misses and 5 incidents. Among them, 5 originated in imaging for planning, 25 in planning, 1 in plan transfer, 1 in commissioning and 1 in treatment delivery. Among them, three near misses originated in the safety barrier of the radiotherapy process. In terms of error type, 1 incident was classified as wrong patient, 7 near misses/incidents as wrong site, 6 as wrong laterality, 5 as wrong dose, 7 as wrong prescription, and 7 as suboptimal plan quality. 5 incidents were all classified as grade 1/2 of dosimetric severity, 1 as grade 0, and the other 4 as grade 1 of medical severity. For the causes/contributory factors, negligence, policy not followed, inadequate training, failure to develop an effective plan, and communication contributed to 19, 15, 12, 5 and 3 near misses/incidents, respectively. The average incident rate per 100 patients treated was 0.4; this rate fell to 0.28% in the second year from 0.56% in the first year. The rate of near miss fell to 1.24% from 2.22%. Conclusion: Effective incident learning can reduce the occurrence of near miss/incidents, enhance the culture of safety. Incident learning is an effective proactive method for improving the quality and safety of radiotherapy.

  4. Efficacy of the Ubiquitous Spaced Retrieval-based Memory Advancement and Rehabilitation Training (USMART) program among patients with mild cognitive impairment: a randomized controlled crossover trial.

    Science.gov (United States)

    Han, Ji Won; Son, Kyung Lak; Byun, Hye Jin; Ko, Ji Won; Kim, Kayoung; Hong, Jong Woo; Kim, Tae Hyun; Kim, Ki Woong

    2017-06-06

    Spaced retrieval training (SRT) is a nonpharmacological intervention for mild cognitive impairment (MCI) and dementia that trains the learning and retention of target information by recalling it over increasingly long intervals. We recently developed the Ubiquitous Spaced Retrieval-based Memory Advancement and Rehabilitation Training (USMART) program as a convenient, self-administered tablet-based SRT program. We also demonstrated the utility of USMART for improving memory in individuals with MCI through an open-label uncontrolled trial. This study had an open-label, single-blind, randomized, controlled, two-period crossover design. Fifty patients with MCI were randomized into USMART-usual care and usual care-USMART treatment sequences. USMART was completed or usual care was provided biweekly over a 4-week treatment period with a 2-week washout period between treatment periods. Primary outcome measures included the Word List Memory Test, Word List Recall Test (WLRT), and Word List Recognition Test. Outcomes were measured at baseline, week 5, and week 11 by raters who were blinded to intervention type. An intention-to-treat analysis and linear mixed modeling were used. Of 50 randomized participants, 41 completed the study (18% dropout rate). The USMART group had larger improvements in WLRT score (effect size = 0.49, p = 0.031) than the usual care group. There were no significant differences in other primary or secondary measures between the USMART and usual care groups. Moreover, no USMART-related adverse events were reported. The 4-week USMART modestly improved information retrieval in older people with MCI, and was well accepted with minimal technical support. ClinicalTrials.gov NCT01688128 . Registered 12 September 2012.

  5. TRAC-PF1/MOD1: an advanced best-estimate computer program for pressurized water reactor thermal-hydraulic analysis

    Energy Technology Data Exchange (ETDEWEB)

    Liles, D.R.; Mahaffy, J.H.

    1986-07-01

    The Los Alamos National Laboratory is developing the Transient Reactor Analysis Code (TRAC) to provide advanced best-estimate predictions of postulated accidents in light-water reactors. The TRAC-PF1/MOD1 program provides this capability for pressurized water reactors and for many thermal-hydraulic test facilities. The code features either a one- or a three-dimensional treatment of the pressure vessel and its associated internals, a two-fluid nonequilibrium hydrodynamics model with a noncondensable gas field and solute tracking, flow-regime-dependent constitutive equation treatment, optional reflood tracking capability for bottom-flood and falling-film quench fronts, and consistent treatment of entire accident sequences including the generation of consistent initial conditions. The stability-enhancing two-step (SETS) numerical algorithm is used in the one-dimensional hydrodynamics and permits this portion of the fluid dynamics to violate the material Courant condition. This technique permits large time steps and, hence, reduced running time for slow transients.

  6. U.S. DOE FreedomCAR and Vehicle Technologies Advanced Technology Development Program for Lithium-Ion Batteries: Gen 2 Performance Evaluation Interim Report

    Energy Technology Data Exchange (ETDEWEB)

    Jon P. Christophersen; Chet Motloch; Ira D. Bloom; Vince Battaglia; Ganesan Nagasubramanian; Tien Q. Duong

    2003-02-01

    The Advanced Technology Development Program is currently evaluating the performance of the second generation of Lithium-ion cells (i.e., Gen 2 cells). The 18650-size Gen 2 cells consist of a baseline chemistry and one variant chemistry. These cells were distributed over a matrix consisting of three states-of-charge (SOC) (60, 80, and 100% SOC), four temperatures (25, 35, 45, and 55°C), and three life tests (calendar-, cycle-, and accelerated-life). The calendar-life cells are clamped at an opencircuit voltage corresponding to 60% SOC and undergo a once-per-day pulse profile. The cycle-life cells are continuously pulsed using a profile that is centered around 60% SOC. The accelerated-life cells are following the calendar-life test procedures, but using the cycle-life pulse profile. Life testing is interrupted every four weeks for reference performance tests (RPTs), which are used to quantify changes in capacity, resistance, and power. The RPTs consist of a C1/1 and C1/25 static capacity tests, a low-current hybrid pulse power characterization test, and electrochemical impedance spectroscopy at 60% SOC. Capacity-, power-, and electrochemical impedance spectroscopy-based performance results are reported.

  7. Changes and demands in the higher education sector are increasingly making advanced degree medical physics programs non-viable and the profession will have to develop a new model for delivering such education.

    Science.gov (United States)

    Fielding, Andrew; Prisciandaro, Joann I; Orton, Colin G

    2017-11-01

    At universities, advanced degree programs in Medical Physics tend to have relatively few students compared to, for example, programs in other Physics sub-specialties. This tends to make them relatively more expensive to operate and, since universities are always looking for ways to reduce costs, there is some concern that such programs will cease to be affordable and other ways to educate medical physicists should be developed. This is the premise debated in this month's Point/Counterpoint. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  8. Improved out-of-hospital cardiac arrest survival through the inexpensive optimization of an existing defibrillation program: OPALS study phase II. Ontario Prehospital Advanced Life Support.

    Science.gov (United States)

    Stiell, I G; Wells, G A; Field, B J; Spaite, D W; De Maio, V J; Ward, R; Munkley, D P; Lyver, M B; Luinstra, L G; Campeau, T; Maloney, J; Dagnone, E

    1999-04-07

    Survival rates for out-of-hospital cardiac arrest are low; published survival rates in Ontario are only 2.5%. This study represents phase II of the Ontario Prehospital Advanced Life Support (OPALS) study, which is designed to systematically evaluate the effectiveness and efficiency of various prehospital interventions for patients with cardiac arrest, trauma, and critical illnesses. To assess the impact on out-of-hospital cardiac arrest survival of the implementation of a rapid defibrillation program in a large multicenter emergency medical services (EMS) system with existing basic life support and defibrillation (BLS-D) level of care. Controlled clinical trial comparing survival for 36 months before (phase I) and 12 months after (phase II) system optimization. Nineteen urban and suburban Ontario communities (populations ranging from 16 000 to 750 000 [total, 2.7 million]). All patients who had out-of-hospital cardiac arrest in the study communities for whom resuscitation was attempted by emergency responders. Study communities optimized their EMS systems to achieve the target response interval from when a call was received until a vehicle stopped with a defibrillator of 8 minutes or less for 90% of cardiac arrest cases. Working both locally and provincially, communities implemented multiple measures, including defibrillation by firefighters, base paging, tiered response agreements with fire departments, continuous quality improvement for response intervals, and province-wide revision and implementation of standard dispatch policies. All response times were obtained from a central dispatch system. Survival to hospital discharge. The 4690 cardiac arrest patients studied in phase I and the 1641 in phase II were similar for all clinical and demographic characteristics, including age, sex, witnessed status, rhythm, and receipt of bystander cardiopulmonary resuscitation. The proportion of cases meeting the 8-minute response criterion improved (76.7% vs 92

  9. Technician Program Uses Advanced Instruments.

    Science.gov (United States)

    Stinson, Stephen

    1981-01-01

    Describes various aspects of a newly-developed computer-assisted drafting/computer-assisted manufacture (CAD/CAM) facility in the chemical engineering technology department at Broome Community College, Binghamton, New York. Stresses the use of new instruments such as microcomputers and microprocessor-equipped instruments. (CS)

  10. Advanced Survivable Radiator Development Program

    Science.gov (United States)

    1993-03-01

    point that it was easily peeled off. When the material was peeled away up to the area protected by the attachment method, the adhesion was sufficient...NOTE: A special braiding package of I.D. 5/8", length 4-1/4" with a straight or pineapple build is available, with a net yarn weight of either 1/8

  11. Advanced Expander Test Bed Program

    Science.gov (United States)

    1991-04-01

    Aoceptance Tests 2. Design Methodology Review a. Cononent Acceptance Tm w/ Spares 3. Preliminary DeignReview 9. Engine Asembly and Acceptance Teets 4. Critical...of the disk and the bearing of both primary and secondary turbines, has been revised to accommodate brush seals for reduced leakage. Primary disk

  12. "Research to Improve the Efficacy of Captive Broodstock Programs and Advance Hatchery Reform Throughout the Columbia River Basin." [from the Abstract], 2007-2008 Annual Progress Report.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry A. [National Marine Fisheries Service

    2009-04-08

    This project was developed to conduct research to improve the efficacy of captive broodstock programs and advance hatchery reform throughout the Columbia river basin. The project has three objectives: (1) maintain adaptive life history characteristics in Chinook salmon, (2) improve imprinting in juvenile sockeye salmon, and (3) match wild phenotypes in Chinook and sockeye salmon reared in hatcheries. A summary of the results are as follows: Objective 1: Adult and jack Chinook salmon males were stocked into four replicate spawning channels at a constant density (N = 16 per breeding group), but different ratios, and were left to spawn naturally with a fixed number of females (N = 6 per breeding group). Adult males obtained primary access to females and were first to enter the nest at the time of spawning. Jack male spawning occurred primarily by establishing satellite positions downstream of the courting pair, and 'sneaking' into the nest at the time of spawning. Male dominance hierarchies were fairly stable and strongly correlated with the order of nest entry at the time of spawning. Spawning participation by jack and adult males is consistent with a negative frequency dependent selection model, which means that selection during spawning favors the rarer life history form. Results of DNA parentage assignments will be analyzed to estimate adult-to-fry fitness of each male. Objective 2: To determine the critical period(s) for imprinting for sockeye salmon, juvenile salmon were exposed to known odorants at key developmental stages. Molecular assessments of imprinting-induced changes in odorant receptor gene expression indicated that regulation of odorant expression is influenced by developmental status and odor exposure history. The results suggest that sockeye salmon are capable of imprinting to homing cues during the developmental periods that correspond to several of current release strategies employed as part of the Captive Broodstock program

  13. Final Results of the Telaprevir Access Program: FibroScan Values Predict Safety and Efficacy in Hepatitis C Patients with Advanced Fibrosis or Cirrhosis.

    Directory of Open Access Journals (Sweden)

    Antonia Lepida

    Full Text Available Liver stiffness determined by transient elastography is correlated with hepatic fibrosis stage and has high accuracy for detecting severe fibrosis and cirrhosis in chronic hepatitis C patients. We evaluated the clinical value of baseline FibroScan values for the prediction of safety and efficacy of telaprevir-based therapy in patients with advanced fibrosis and cirrhosis in the telaprevir Early Access Program HEP3002.1,772 patients with HCV-1 and bridging fibrosis or cirrhosis were treated with telaprevir plus pegylated interferon-α and ribavirin (PR for 12 weeks followed by PR alone, the total treatment duration depending on virological response and previous response type. Liver fibrosis stage was determined either by liver biopsy or by non-invasive markers. 1,282 patients (72% had disease stage assessed by FibroScan; among those 46% were classified as Metavir F3 at baseline and 54% as F4.Overall, 1,139 patients (64% achieved a sustained virological response (SVR by intention-to-treat analysis. Baseline FibroScan values were tested for association with SVR and the occurrence of adverse events. By univariate analysis, higher baseline FibroScan values were predictive of lower sustained virological response rates and treatment-related anemia. By multivariate analysis, FibroScan was no longer statistically significant as an independent predictor, but higher FibroScan values were correlated with the occurrence of infections and serious adverse events.FibroScan has a limited utility as a predictor of safety and efficacy in patients treated with telaprevir-based triple therapy. Nevertheless it can be used in association with other clinical and biological parameters to help determine patients who will benefit from the triple regiments.ClinicalTrials.gov NCT01508286.

  14. The North Carolina Field Test: Field performance of the preliminary version of an advanced weatherization audit for the Department of Energy`s Weatherization Assistance Program

    Energy Technology Data Exchange (ETDEWEB)

    Sharp, T.R.

    1994-06-01

    The field performance of weatherizations based on a newly-developed advanced technique for selecting residential energy conservation measures was tested alongside current Retro-Tech-based weatherizations in North Carolina. The new technique is computer-based and determines measures based on the needs of an individual house. In addition, it recommends only those measures that it determines will have a benefit-to-cost ratio greater than 1 for the house being evaluated. The new technique also considers the interaction of measures in computing the benefit-to-cost ratio of each measure. The two weatherization approaches were compared based on implementation ease, measures installed, labor and cost requirements, and both heating and cooling energy savings achieved. One-hundred and twenty houses with the following characteristics participated: the occupants were low-income, eligible for North Carolina`s current weatherization program, and responsible for their own fuel and electric bills. Houses were detached single-family dwellings, not mobile homes; were heated by kerosene, fuel oil, natural gas, or propane; and had one or two operating window air conditioners. Houses were divided equally into one control group and two weatherization groups. Weekly space heating and cooling energy use, and hourly indoor and outdoor temperatures were monitored between November 1989 and September 1990 (pre-period) and between December 1990 and August 1991 (post-period). House consumption models were used to normalize for annual weather differences and a 68{degrees}F indoor temperature. Control group savings were used to adjust the savings determined for the weatherization groups. The two weatherization approaches involved installing attic and floor insulations in near equivalent quantities, and installing storm windows and wall insulation in drastically different quantities. Substantial differences also were found in average air leakage reductions for the two weatherization groups.

  15. A 25-year analysis of the American College of Gastroenterology research grant program: factors associated with publication and advancement in academics.

    Science.gov (United States)

    Crockett, Seth D; Dellon, Evan S; Bright, Stephanie D; Shaheen, Nicholas J

    2009-05-01

    The American College of Gastroenterology (ACG) has awarded research grants for 25 years. We assessed the characteristics of grant recipients, their current academic status, and the likelihood of publication resulting from the grant. Demographic data, the year and amount of award, title of project, and recipient's institution were extracted from ACG databases. Using ACG reports and medical literature search engines, we assessed publication based on grant-funded research, as well as career publication record. We also determined the current position of awardees. A similar analysis was performed for recipients of junior investigator awards. A total of 396 clinical research awards totaling $5,374,497 ($6,867,937 in 2008 dollars) were awarded to 341 recipients in the 25 years between 1983 and 2008. The most commonly funded areas of research were endoscopy (22% of awards) and motility/functional disorders (21%). At least one peer-reviewed publication based on grant-funded research occurred with 255 of the 368 awards (69%) for 1983-2006 [corrected]. Higher award value was associated with subsequent publication. Of the 313 awardees over the same period, 195 (62%) are currently in academic positions [corrected]. Factors associated with staying in academics included higher award value (P academics. Overall, the mean cost in grant dollars per published paper based on the research was $14,875. The majority of ACG grant recipients published the results of their research and remained in academics. Higher amount of award, holding an advanced degree, and publication were associated with careers in academics. The ACG research grant award program is an important engine of investigation, publication, and academic career development in the field of gastroenterology.

  16. High Performance Computing: Advanced Research Projects Agency Should Do More To Foster Program Goals. Report to the Chairman, Committee on Armed Services, House of Representatives.

    Science.gov (United States)

    General Accounting Office, Washington, DC. Information Management and Technology Div.

    High-performance computing refers to the use of advanced computing technologies to solve highly complex problems in the shortest possible time. The federal High Performance Computing and Communications Initiative of the Advanced Research Project Agency (ARPA) attempts to accelerate availability and use of high performance computers and networks.…

  17. Advanced Hydrogen Turbine Development

    Energy Technology Data Exchange (ETDEWEB)

    Marra, John [Siemens Energy, Inc., Orlando, FL (United States)

    2015-09-30

    Under the sponsorship of the U.S. Department of Energy (DOE) National Energy Technology Laboratories, Siemens has completed the Advanced Hydrogen Turbine Development Program to develop an advanced gas turbine for incorporation into future coal-based Integrated Gasification Combined Cycle (IGCC) plants. All the scheduled DOE Milestones were completed and significant technical progress was made in the development of new technologies and concepts. Advanced computer simulations and modeling, as well as subscale, full scale laboratory, rig and engine testing were utilized to evaluate and select concepts for further development. Program Requirements of: A 3 to 5 percentage point improvement in overall plant combined cycle efficiency when compared to the reference baseline plant; 20 to 30 percent reduction in overall plant capital cost when compared to the reference baseline plant; and NOx emissions of 2 PPM out of the stack. were all met. The program was completed on schedule and within the allotted budget

  18. "Research to Improve the Efficacy of Captive Broodstock Programs and Advance Hatchery Reform Throughout the Columbia River Basin." [from the Abstract], 2008-2009 Progress Report.

    Energy Technology Data Exchange (ETDEWEB)

    Berejikian, Barry A. [National Oceanic and Atmospheric Administration, National Marine Fisheries Service

    2009-08-18

    This project was developed to conduct research to improve the efficacy of captive broodstock programs and advance hatchery reform throughout the Columbia River Basin. The project has three objectives: (1) maintain adaptive life history characteristics in Chinook salmon, (2) improve imprinting in juvenile sockeye salmon, and (3) match wild phenotypes in Chinook and sockeye salmon reared in hatcheries. A summary of the results are as follows: Objective 1: The ratio of jack to adult male Chinook salmon were varied in experimental breeding populations to test the hypothesis that reproductive success of the two male phenotypes would vary with their relative frequency in the population. Adult Chinook salmon males nearly always obtained primary access to nesting females and were first to enter the nest at the time of spawning. Jack male spawning occurred primarily by establishing satellite positions downstream of the courting pair, and 'sneaking' into the nest at the time of spawning. Male dominance hierarchies were fairly stable and strongly correlated with the order of nest entry at the time of spawning. Observed participation in spawning events and adult-to-fry reproductive success of jack and adult males was consistent with a negative frequency-dependent selection model. Overall, jack males sired an average of 21% of the offspring produced across a range of jack male frequencies. Implications of these and additional findings on Chinook salmon hatchery broodstock management will be presented in the FY 2009 Annual Report. Objective 2: To determine the critical period(s) for imprinting for sockeye salmon, juvenile salmon were exposed to known odorants at key developmental stages. Molecular assessments of imprinting-induced changes in odorant receptor gene expression indicated that regulation of odorant expression is influenced by developmental status and odor exposure history. Expression levels of basic amino acid receptor (BAAR) mRNA in the olfactory

  19. Whither Advanced Placement?

    Directory of Open Access Journals (Sweden)

    William Lichten

    2000-06-01

    Full Text Available This is a review of the Advanced Placement (AP Program. In disagreement with claims of the College Board, there is firm evidence that the average test performance level has dropped. The College Board's scale and claims for AP qualification disagree seriously with college standards. A majority of tests taken do not qualify. It appears that "advanced placement" is coming closer to "placement." This article recommends that the College Board's policy of concentrating on numbers of participants should be changed to an emphasis on student performance and program quality.

  20. Ostomy Home Skills Program

    Medline Plus

    Full Text Available ... Trauma Quality Programs National Trauma Data Bank Trauma Quality Improvement Program Mentoring for Excellence in Trauma Surgery Advanced Trauma Life Support Verification, Review, and Consultation Program for Hospitals ...

  1. Ostomy Home Skills Program

    Medline Plus

    Full Text Available ... Data Bank Trauma Quality Improvement Program Mentoring for Excellence in Trauma Surgery Advanced Trauma Life Support Verification, ... Patients Medical Professionals Skills Programs Find a Treatment Center Patient Safety Resources About the Patient Education Program ...

  2. Benchmarking of the State-of-the-Art in Nondestructive Testing/Evaluation for Applicability in the Composite Armored Vehicle (CAV) Advanced Technology Demonstrator (ATD) Program

    Science.gov (United States)

    1993-11-01

    OF PAGES Composites, Microwave, IR Thermography, Eddy Current, Reverse 176 pages Geometry X-ray, 2-D Array UT, Shearography . 16. PRICE CODE 17...applications. A large fraction of advanced weapon system components and assemblies now contain composite materials. Private industry has advanced into large...testing. As described in Section 2, much more definition of the effects of defects is required before appropriate NDE systems can be selected. Production

  3. 7 CFR 772.15 - Protective advances.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Protective advances. 772.15 Section 772.15 Agriculture... SPECIAL PROGRAMS SERVICING MINOR PROGRAM LOANS § 772.15 Protective advances. (a) The Agency may approve... account to protect its lien or security. (b) The Agency may pay protective advances only when it...

  4. 7 CFR 3575.83 - Protective advances.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Protective advances. 3575.83 Section 3575.83... AGRICULTURE GENERAL Community Programs Guaranteed Loans § 3575.83 Protective advances. Protective advances can.... Protective advances constitute an indebtedness of the borrower to the lender and must be secured by...

  5. Advanced turboprop testbed systems study. Volume 1: Testbed program objectives and priorities, drive system and aircraft design studies, evaluation and recommendations and wind tunnel test plans

    Science.gov (United States)

    Bradley, E. S.; Little, B. H.; Warnock, W.; Jenness, C. M.; Wilson, J. M.; Powell, C. W.; Shoaf, L.

    1982-01-01

    The establishment of propfan technology readiness was determined and candidate drive systems for propfan application were identified. Candidate testbed aircraft were investigated for testbed aircraft suitability and four aircraft selected as possible propfan testbed vehicles. An evaluation of the four candidates was performed and the Boeing KC-135A and the Gulfstream American Gulfstream II recommended as the most suitable aircraft for test application. Conceptual designs of the two recommended aircraft were performed and cost and schedule data for the entire testbed program were generated. The program total cost was estimated and a wind tunnel program cost and schedule is generated in support of the testbed program.

  6. Marine Corps Systems Command (MCSC) Program Executive Officer Land Systems (PEO LS) 2010 Advanced Planning Briefing to Industry (APBI) (BRIEFING CHARTS)

    Science.gov (United States)

    2010-04-07

    Pam Gulick Lead Program Analyst (ALA and BA Domain) 432.3023 pamela.gulick@usmc.mil Sherri Payne Program Analyst 432.3962 sherri.payne@usmc.mil Judith...Assessment Coordinator: Vacant C4 Architect: Vacant Intel Architect: Ms. Cecilia Hall Technologist: Mr. Martin Jackson T&E Lead: Mr. Joseph Murgo Safety Lead

  7. Biochemical Technology Program progress report for the period January 1--June 30, 1976. [Centrifugal analyzers and advanced analytical systems for blood and body fluids

    Energy Technology Data Exchange (ETDEWEB)

    Mrochek, J.E.; Burtis, C.A.; Scott, C.D. (comps.)

    1976-09-01

    This document, which covers the period January 1-June 30, 1976, describes progress in the following areas: (1) advanced analytical techniques for the clinical laboratory, (2) fast clinical analyzers, (3) development of a miniaturized analytical clinical laboratory system, (4) centrifugal fast analyzers for animal toxicological studies, and (5) chemical profile of body fluids.

  8. Advanced Capabilities for Combat Medics

    National Research Council Canada - National Science Library

    Convertino, Victor A; Cooke, William H; Salinas, Jose; Holcomb, John B

    2004-01-01

    The US Army Institute of Surgical Research (USAISR) has the lead for directing the Research Program Area for Advanced Triage Capabilities for Combat Medics in the Medical Research and Materiel Command (MRMC...

  9. Preparation for Advanced Nursing Practice.

    Science.gov (United States)

    Frik, Seigina M.; Pollock, Susan E.

    1993-01-01

    Lehman College's graduate nursing program uses theory-based courses to prepare advanced nurse practitioners. Students increase scholarly inquiry skills and clinical decision making; use of nursing conceptual models helped them plan and evaluate their practice. (SK)

  10. Advance care planning in patients with cancer referred to a phase I clinical trials program: the MD Anderson Cancer Center experience.

    Science.gov (United States)

    Fu, Siqing; Barber, F Diane; Naing, Aung; Wheler, Jennifer; Hong, David; Falchook, Gerald; Piha-Paul, Sarina; Tsimberidou, Apostolia; Howard, Adrienne; Kurzrock, Razelle

    2012-08-10

    Patients with advanced malignancies referred for early clinical trials have a short life expectancy. We designed this survey to ascertain the status of advance care planning in this population. Patients who were seen in a phase I clinic were asked to anonymously complete an investigator-designed survey. Of 435 individuals approached, 215 (49%) returned completed or partially completed surveys, whereas many others stated that they wanted to avoid the topic, because they had come to the phase I clinic for cancer therapy. Most patients (n = 149; 69%) were still hopeful about their future. Approximately 42% of patients (n = 90) reported having a living will, 46% had a medical power of attorney (n = 98), and 19% had a do-not-resuscitate (DNR) order (n = 40). Approximately 20% of participants (n = 43) had not discussed advance care planning. Fifty-nine percent of patients wanted to discuss advance care planning with their physician. Having a DNR order in place was significantly more common in individuals who had a living will and/or a medical power of attorney. Although most patients referred to a phase I clinic remained optimistic, many had discussed a living will, medical power of attorney, and/or DNR order with their physician, family, and/or attorney. However, a significant minority had not addressed this issue with anyone, and many refused to take a survey on the topic. More than half of the patients wanted to discuss these matters with their physician. These observations suggest that extra effort to address advance care planning is needed for these patients.

  11. A cost-effectiveness analysis of using TheraBite in a preventive exercise program for patients with advanced head and neck cancer treated with concomitant chemo-radiotherapy.

    Science.gov (United States)

    Retèl, Valesca P; van der Molen, Lisette; Steuten, Lotte M G; van den Brekel, Michiel W; Hilgers, Frans J M

    2016-03-01

    Previous studies have shown that a "Preventive Exercise Program" (PREP) is cost-effective compared to the standard exercise program provided in "Usual Care" (UC) in patients with advanced head and neck cancer. The current paper specifically estimates the cost-effectiveness of the TheraBite jaw rehabilitation device (TB) which is used as part of the PREP, compared to Speech Language Pathology (SLP) sessions as part of UC, and herewith intents to inform reimbursement discussions regarding the TheraBite device. Costs and outcomes [quality-adjusted life-years (QALYs)] of the TB compared to SLP were estimated using a Markov model of advanced head and neck cancer patients. Secondary outcome variables were trismus, feeding substitutes, facial pain, and pneumonia. The incremental cost-effectiveness ratio (ICER) was estimated from a health care perspective of the Netherlands, with a time horizon of 2 years. The total health care costs per patient were estimated to amount to €5,129 for the TB strategy and €6,915 for the SLP strategy. Based on the current data, the TB strategy yielded more quality-adjusted life-years (1.28) compared to the SLP strategy (1.24). Thus, the TB strategy seems more effective (+0.04) and less costly (-€1,786) than the SLP only strategy. At the prevailing threshold of €20,000/QALY the probability for the TB strategy being cost-effective compared to SLP was 70 %. To conclude, analysis of presently available data indicates that TB is expected to be cost-effective compared to SLP in a preventive exercise program for concomitant chemo-radiotherapy for advanced head and neck cancer patients.

  12. Advanced Messaging Concept Development Basic Safety Message

    Data.gov (United States)

    Department of Transportation — Contains all Basic Safety Messages (BSMs) collected during the Advanced Messaging Concept Development (AMCD) field testing program. For this project, all of the Part...

  13. Advanced maternal age causes adverse programming of mouse blastocysts leading to altered growth and impaired cardiometabolic health in post-natal life

    OpenAIRE

    Velazquez, M.A.; Smith, C.G.C.; Smyth, N.R.; Osmond, C; Fleming, T P

    2016-01-01

    STUDY QUESTION Does advanced maternal age (AMA) in mice affect cardiometabolic health during post-natal life in offspring derived from an assisted reproduction technology (ART) procedure? SUMMARY ANSWER Offspring derived from blastocysts collected from aged female mice displayed impaired body weight gain, blood pressure, glucose metabolism and organ allometry during post-natal life compared with offspring derived from blastocysts from young females; since all blastocysts were transferred to n...

  14. Technical and economic assessment of processes for the production of butanol and acetone. Phase two: analysis of research advances. Energy Conversion and Utilization Technologies Program

    Energy Technology Data Exchange (ETDEWEB)

    None

    1984-08-01

    The initial objective of this work was to develop a methodology for analyzing the impact of technological advances as a tool to help establish priorities for R and D options in the field of biocatalysis. As an example of a biocatalyzed process, butanol/acetone fermentation (ABE process) was selected as the specific topic of study. A base case model characterizing the technology and economics associated with the ABE process was developed in the previous first phase of study. The project objectives were broadened in this second phase of work to provide parametric estimates of the economic and energy impacts of a variety of research advances in the hydrolysis, fermentation and purification sections of the process. The research advances analyzed in this study were based on a comprehensive literature review. The six process options analyzed were: continuous ABE fermentaton; vacuum ABE fermentation; Baelene solvent extraction; HRI's Lignol process; improved prehydrolysis/dual enzyme hydrolysis; and improved microorganism tolerance to butanol toxicity. Of the six options analyzed, only improved microorganism tolerance to butanol toxicity had a significant positive effect on energy efficiency and economics. This particular process option reduced the base case production cost (including 10% DCF return) by 20% and energy consumption by 16%. Figures and tables.

  15. Benefits assessment of advanced public transportation system technologies, update 2000

    Science.gov (United States)

    This report was performed under the Federal Transit Administration's (FTA) Advanced Public Transportation Systems (APTS) Program. This program focuses on the development and demonstration of innovative advanced navigation, information and communicati...

  16. Advanced public transportation systems : the state of the art

    Science.gov (United States)

    1991-03-01

    This report documents one of the early initiatives of UMTA's Advanced Public Transportation Systems (APTS) Program, a program structured to undertake research and development of innovative applications of advanced navigation, information, and communi...

  17. Advanced nanoelectronics

    CERN Document Server

    Ismail, Razali

    2012-01-01

    While theories based on classical physics have been very successful in helping experimentalists design microelectronic devices, new approaches based on quantum mechanics are required to accurately model nanoscale transistors and to predict their characteristics even before they are fabricated. Advanced Nanoelectronics provides research information on advanced nanoelectronics concepts, with a focus on modeling and simulation. Featuring contributions by researchers actively engaged in nanoelectronics research, it develops and applies analytical formulations to investigate nanoscale devices. The

  18. QA (Quality Assurance) role in advanced energy activities: Towards an /open quotes/orthodox/close quotes/ Quality Program: Canonizing the traditions at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    Bodnarczuk, M.W.

    1988-02-01

    After a brief description of the goal of Fermi National Accelerator Laboratory (Fermilab) this paper poses and answers three questions related to Quality Assurance (QA) at the Laboratory. First, what is the difference between 'orthodox' and 'unorthodox' QA and is there a place for 'orthodox' QA at a laboratory like Fermilab. Second, are the deeper philosophical and cultural frameworks of high-energy physics acommodating or antagonistic to an 'orthodox' QA Program. Finally, faced with the task of developing an institutional QA program for Fermilab where does one begin. The paper is based on experience with the on-going development and implementation of an institutional QA Program at Fermilab. 10 refs.

  19. Advanced gas cooled nuclear reactor materials evaluation and development program. Progress report for period, 1 October 1977--31 December 1977

    Energy Technology Data Exchange (ETDEWEB)

    1978-03-20

    The objectives of this program are to evaluate candidate alloys for Very High Temperature Reactor Nuclear Process Heat (NPH) and Direct Cycle Helium Turbine (DCHT) applications, in terms of the affect of simulated reactor primary coolant (helium containing small amounts of various other gases), high temperatures, and long time exposures, on the mechanical properties and structural and surface stability of selected candidate alloys. A second objective is to select and recommend materials for future test facilities and more extensive qualification programs. Work covered includes the activities associated with the procurement of the materials for the screening test program and information from vendor certification for the materials received for the nuclear process heat candidate alloys. The design modifications to the helium purification system and the construction status of the simulated reactor helium supply system, testing equipment, and analysis instrumentation and equipment are discussed. Finally, the status and details of the data management are presented.

  20. Advanced Education and Technology Business Plan, 2010-13

    Science.gov (United States)

    Alberta Advanced Education and Technology, 2010

    2010-01-01

    This paper presents the business plan of the Ministry of Advanced Education and Technology for 2010 to 2013. Advanced Education and Technology supports the advanced learning system by providing funding for advanced learning providers, coordinating and approving programs of study at public institutions, licensing and approving programs at private…

  1. Advancing Efforts to Energize Native Alaska (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2013-04-01

    This brochure describes key programs and initiatives of the DOE Office of Indian Energy Policy and Programs to advance energy efficiency, renewable energy, and energy infrastructure projects in Alaska Native villages.

  2. Alliance for NanoHealth (ANH) Training Program for the development of future generations of interdisciplinary scientists and collaborative research focused upon the advancement of nanomedicine

    Energy Technology Data Exchange (ETDEWEB)

    Gorenstein, David [Univ. of Texas Health Science Center, Houston, TX (United States)

    2013-12-23

    The objectives of this program are to promote the mission of the Department of Energy (DOE) Science, Technology, Engineering, Math (STEM) Program by recruiting students to science and engineering disciplines with the intent of mentoring and supporting the next generation of scientists; to foster interdisciplinary and collaborative research under the sponsorship of ANH for the discovery and design of nano-based materials and devices with novel structures, functions, and properties; and to prepare a diverse work force of scientists, engineers, and clinicians by utilizing the unique intellectual and physical resources to develop novel nanotechnology paradigms for clinical application.

  3. AdvancED Flex 4

    CERN Document Server

    Tiwari, Shashank; Schulze, Charlie

    2010-01-01

    AdvancED Flex 4 makes advanced Flex 4 concepts and techniques easy. Ajax, RIA, Web 2.0, mashups, mobile applications, the most sophisticated web tools, and the coolest interactive web applications are all covered with practical, visually oriented recipes. * Completely updated for the new tools in Flex 4* Demonstrates how to use Flex 4 to create robust and scalable enterprise-grade Rich Internet Applications.* Teaches you to build high-performance web applications with interactivity that really engages your users.* What you'll learn Practiced beginners and intermediate users of Flex, especially

  4. Proposal for an advanced heat source assembly for the Isotope Brayton Power System. Volume 1. Technical program and statement of work

    Energy Technology Data Exchange (ETDEWEB)

    1974-12-09

    The technical program plan for evaluating the performance and safety of a radioisotope-fueled Brayton power system for space vehicles is presented with schedules for evaluating heat source design and safety, for specifying power system requirements, and for the development and operation of a ground demonstration system. (LCL)

  5. Advanced-gas-cooled-nuclear-reactor materials evaluation and development program. Volume 1. Final report, September 23, 1976-September 30, 1982

    Energy Technology Data Exchange (ETDEWEB)

    Kimball, O.F.

    1983-05-15

    Included in this report is a discussion of the materials selected for the screening phase and more intensive screening phase test programs and the systems and components for which they are candidate materials. Thirty-one (31) commercially available alloy and alloy/coating materials and ten (10) experimental alloys were evaluated in the program. The experimental test facilities developed as part of this program are discussed and experimental testing procedures are summarized. The results of the initial screening test programs are presented. This includes creep testing results and metallographic analyses of candidate materials exposed to simulated HTGR helium and air under stress at temperatures of 750/sup 0/, 850/sup 0/, 950/sup 0/, or 1050/sup 0/C (1382/sup 0/, 1562/sup 0/, 1742/sup 0/, or 1922/sup 0/F) for exposure times to 10,000 hours. Metallographic analyses, weight change and carbon analyses results, and post exposure room temperature tensile and Charpy V-notch impact test results are presented for candidate materials exposed unstressed under the conditions stated above.

  6. Free Trade and Tariffs: Level III, Unit 2, Lesson 1; Capitalism, Communism, Socialism: Lesson 2; Nationalism vs. Internationalism: Lesson 3. Advanced General Education Program. A High School Self-Study Program.

    Science.gov (United States)

    Manpower Administration (DOL), Washington, DC. Job Corps.

    This self-study program for high-school level contains lessons on: Free Trade and Tariffs; Capitalism, Communism, Socialism; and Nationalism vs. Internationalism. Each of the lessons concludes with a Mastery Test to be completed by the student. (DB)

  7. Ostomy Home Skills Program

    Medline Plus

    Full Text Available ... Medical Professionals Skills Programs Find a Treatment Center Patient Safety Resources About the Patient Education Program The Recovery ... Trauma CME Nora Institute Nora Institute for Surgical Patient Safety Nora Institute for Surgical Patient Safety Advanced Skills ...

  8. Ostomy Home Skills Program

    Medline Plus

    Full Text Available ... Be a YFA Leader Meetings and Events YFA Mentor Programs Top 10 Reasons to Participate Resources Webinars ... National Trauma Data Bank Trauma Quality Improvement Program Mentoring for Excellence in Trauma Surgery Advanced Trauma Life ...

  9. Ostomy Home Skills Program

    Medline Plus

    Full Text Available ... for Excellence in Trauma Surgery Advanced Trauma Life Support Verification, Review, and Consultation Program for Hospitals Trauma Systems Consultation Program Trauma Education Achieving Zero Preventable Deaths ...

  10. Advance in structural bioinformatics

    CERN Document Server

    Wei, Dongqing; Zhao, Tangzhen; Dai, Hao

    2014-01-01

    This text examines in detail mathematical and physical modeling, computational methods and systems for obtaining and analyzing biological structures, using pioneering research cases as examples. As such, it emphasizes programming and problem-solving skills. It provides information on structure bioinformatics at various levels, with individual chapters covering introductory to advanced aspects, from fundamental methods and guidelines on acquiring and analyzing genomics and proteomics sequences, the structures of protein, DNA and RNA, to the basics of physical simulations and methods for conform

  11. Study of Current Practice and Future Advancements in Blood Management and Effectiveness of a Multimodality Training Program on Improving Transfusion Knowledge, Practice and Outcomes

    Science.gov (United States)

    2012-08-01

    factors: low preoperative hemoglobin levels, excessive surgical blood loss, and inappropriate transfusion practices [10]. To this end, PBM relies on...physician, nurse , pharmacist, etc) who has an administrative role in the hospital. C. Staff members must be permanent employees of the hospital or...protocol intervention is the PBM training program provided to the participants during a 5-day visit to Englewood Hospital and Medical Center. The

  12. The Bologna Agreement and its impact on the Master in Advanced Nursing Practice Program at Rotterdam University of Applied Science: incorporating mandatory internationalization in the curriculum.

    Science.gov (United States)

    Maas-Garcia, L; Ter Maten-Speksnijder, A

    2009-09-01

    The aim of this paper is to discuss the impact on nursing education in the Netherlands since the implementation of the Bologna Agreement. In 1999, the Bologna Agreement was constructed to establish a comparable and transferable degree system in universities within the European Union for nine subject areas (chemistry, physics, mathematics, geology, history, business, education science, nursing and European studies). The target date for implementation of the undergraduate and graduate degrees is 2010. Since 2004, Rotterdam University of Applied Science has offered a Master in Advance Nursing Practice degree. This graduate study offers nursing students the opportunity to continue career and academic mobility within the nursing profession. This paper reports on the need for internationalization within nursing curriculum to meet the demands of the increasingly mobile nursing workforce.

  13. Advanced calculus

    CERN Document Server

    Nickerson, HK; Steenrod, NE

    2011-01-01

    ""This book is a radical departure from all previous concepts of advanced calculus,"" declared the Bulletin of the American Mathematics Society, ""and the nature of this departure merits serious study of the book by everyone interested in undergraduate education in mathematics."" Classroom-tested in a Princeton University honors course, it offers students a unified introduction to advanced calculus. Starting with an abstract treatment of vector spaces and linear transforms, the authors introduce a single basic derivative in an invariant form. All other derivatives - gradient, divergent, curl,

  14. 7 CFR 1779.83 - Protective advances.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 12 2010-01-01 2010-01-01 false Protective advances. 1779.83 Section 1779.83... AGRICULTURE (CONTINUED) WATER AND WASTE DISPOSAL PROGRAMS GUARANTEED LOANS § 1779.83 Protective advances. Protective advances can only be added to the loan account for purposes of requirements to preserve the value...

  15. 7 CFR 1980.372 - Protective advances.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Protective advances. 1980.372 Section 1980.372...) PROGRAM REGULATIONS (CONTINUED) GENERAL Rural Housing Loans § 1980.372 Protective advances. Protective advances must constitute an indebtedness of the borrower to the Lender and be secured by the security...

  16. 7 CFR 4280.155 - Protective advances.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Protective advances. 4280.155 Section 4280.155... Efficiency Improvements Program Section B. Guaranteed Loans § 4280.155 Protective advances. All protective advances made by the lender must comply with § 4287.156 of this chapter. ...

  17. 7 CFR 1951.227 - Protective advances.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Protective advances. 1951.227 Section 1951.227... Programs Loans and Grants § 1951.227 Protective advances. The State Director is authorized to approve... protect its lien or security. The State Director must determine that authorizing a protective advance is...

  18. 7 CFR 1485.18 - Advances.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Advances. 1485.18 Section 1485.18 Agriculture... MARKETS FOR AGRICULTURAL COMMODITIES Market Access Program § 1485.18 Advances. (a) Policy. In general, CCC operates MAP and EIP/MAP on a reimbursable basis. CCC will not advance funds to an EIP/MAP participant or...

  19. Advancing Leadership

    OpenAIRE

    Penny L. Tenuto

    2014-01-01

    Preparing students to become active citizens and contributors to a democratic society is premised on teaching democratic principles and modeling standards of democratic practice at all levels of education. The purpose of this integrative literature review is to establish a conceptual framework grounded in literature and a model for cultivating democratic professional practice in education (DPPE) to advance leadership f...

  20. Technological Advancements

    Science.gov (United States)

    Kennedy, Mike

    2010-01-01

    The influx of technology has brought significant improvements to school facilities. Many of those advancements can be found in classrooms, but when students head down the hall to use the washrooms, they are likely to find a host of technological innovations that have improved conditions in that part of the building. This article describes modern…

  1. High-Performance Corrosion-Resistant Materials: Iron-Based Amorphous-Metal Thermal-Spray Coatings: SAM HPCRM Program ? FY04 Annual Report ? Rev. 0 - DARPA DSO & DOE OCRWM Co-Sponsored Advanced Materials Program

    Energy Technology Data Exchange (ETDEWEB)

    Farmer, J; Haslam, J; Wong, F; Ji, S; Day, S; Branagan, D; Marshall, M; Meacham, B; Buffa, E; Blue, C; Rivard, J; Beardsley, M; Buffa, E; Blue, C; Rivard, J; Beardsley, M; Weaver, D; Aprigliano, L; Kohler, L; Bayles, R; Lemieux, E; Wolejsza, T; Martin, F; Yang, N; Lucadamo, G; Perepezko, J; Hildal, K; Kaufman, L; Heuer, A; Ernst, F; Michal, G; Kahn, H; Lavernia, E

    2007-09-19

    The multi-institutional High Performance Corrosion Resistant Materials (HPCRM) Team is cosponsored by the Defense Advanced Projects Agency (DARPA) Defense Science Office (DSO) and the Department of Energy (DOE) Office of Civilian Radioactive Waste Management (OCRWM), and has developed new corrosion-resistant, iron-based amorphous metals that can be applied as coatings with advanced thermal spray technology. Two compositions have corrosion resistance superior to wrought nickel-based Alloy C-22 (UNS No. N06022) in very aggressive environments, including concentrated calcium-chloride brines at elevated temperature. Corrosion costs the Department of Defense billions of dollars every year, with an immense quantity of material in various structures undergoing corrosion. For example, in addition to fluid and seawater piping, ballast tanks, and propulsions systems, approximately 345 million square feet of structure aboard naval ships and crafts require costly corrosion control measures. The use of advanced corrosion-resistant materials to prevent the continuous degradation of this massive surface area would be extremely beneficial. The Fe-based corrosion-resistant, amorphous-metal coatings under development may prove of importance for applications on ships. Such coatings could be used as an 'integral drip shield' on spent fuel containers, as well as protective coatings that could be applied over welds, thereby preventing exposure to environments that might cause stress corrosion cracking. In the future, such new high-performance iron-based materials could be substituted for more-expensive nickel-based alloys, thereby enabling a reduction in the $58-billion life cycle cost for the long-term storage of the Nation's spent nuclear fuel by tens of percent.

  2. Feasibility and impact of a dedicated multidisciplinary rehabilitation program on health-related quality of life in advanced head and neck cancer patients.

    Science.gov (United States)

    Passchier, Ellen; Stuiver, Martijn M; van der Molen, Lisette; Kerkhof, Stefanie I C; van den Brekel, Michiel W M; Hilgers, Frans J M

    2016-06-01

    In an observational prospective study, feasibility and outcomes of a dedicated multidisciplinary rehabilitation program (HNR) for head and neck cancer (HNC) patients were evaluated. HRQoL was assessed before and after HNR with EORTC C30 and H&N-35 QoL questionnaires in 52 consecutive patients. Initial HRQoL scores were compared with EORTC reference scores for HNC patients and post-HNR with those available for the general healthy population. Distress was assessed before and after HNR with the distress thermometer (DT). At completion of HNR with a mean duration of 7 months, overall HRQoL was significantly improved (p < 0.001). Role, Emotional, and Social function scales and most EORTC C30 and H&N35 symptom scale items showed a statistically significant (p < 0.01) and clinically relevant improvement. Mean distress score before HNR was above the cutoff value of 5, suggesting the need for referral to rehabilitation. After completing HNR, distress decreased significantly to 3.0 (p < 0.001). HRQoL pretreatment was poorer than that of the EORTC reference HNC population, whereas at the completion of the HNR program, the HRQoL was comparable to that of the general population reference level. We conclude that a dedicated multidisciplinary HNR program is feasible and suggest that it has a positive impact on HRQoL. The multidisciplinary approach may have added value over mono-disciplinary interventions. However, our results should be judged cautiously due to the observational nature of the study.

  3. Role of environmental geology in US Department of Energy's advanced research and development programs to promote energy security in the United States

    Science.gov (United States)

    Brown, C. E.

    1995-12-01

    The purpose of this report is to describe the research programs and program activities of the US Department of Energy (DOE) that most directly relate to topics in the field of environmental geology. In this light, the mission of the DOE and the definition of environmental geology will be discussed. In a broad sense, environmental geology is that branch of earth science that emphasizes the entire spectrum of human interactions with the physical environment that include environmental health, mineral exploration and exploitation, waste management, energy use and conservation, global change, environmental law, natural and man-made hazard assessment, and land-use planning. A large number of research, development, and demonstration programs are under DOE's administration and guidance that directly or indirectly relate to topics in environmental geology. The primary mission of the DOE is to contribute to the welfare of the nation by providing the scientific foundation, technology, policy, and institutional leadership necessary to achieve efficiency in energy use, diversity in energy sources, a more productive and competitive economy, improved environmental quality, and a secure national defense. The research and development funding effort has most recently been redirected toward greater utilization of clean fossil fuels, especially natural gas, weatherization, renewable energy, energy efficiency, fusion energy, and high-energy physics. This paper will summarize the role that environmental geology has played and will continue to play in the execution of DOE's mission and the energy options that DOE has investigated closely. The specific options are those that center around energy choices, such as alternative-fueled transportation, building technologies, energy-efficient lighting, and clean energy.

  4. The Application of Advanced Geophysical Classification in Support of Munitions Response Program: An Outreach to Federal, State and Local Regulators and Tribal Governments

    Science.gov (United States)

    2017-04-18

    FUDS Program CTC (FY* & Beyond) $ B ill io ns M&S IRP MMRP $18.2 $17.9 $16.7 $14.1 $14.0 $13.0 $13.5 $12.2 $10.0 $9.5 $3.2 $2.8 $3.0...collection, moderate geology Spencer Range, TN Camp Beale, CA Most analysts correctly classify all seeds, eliminate ~70% of the clutter from the...complex geology Massachusetts Military Reservation, MA Even the most skilled analysts may not detect all TOI, eliminate ~50- 70% of the clutter from

  5. Advancing Telephone Focus Groups Method Through the Use of Webinar: Methodological Reflections on Evaluating Ontario, Canada's Healthy Babies Healthy Children Program.

    Science.gov (United States)

    Chong, Eunice; Alayli-Goebbels, Adrienne; Webel-Edgar, Lori; Muir, Sarah; Manson, Heather

    2015-01-01

    Telephone focus groups have been increasingly popular in public health research and evaluation. One of the main concerns of telephone focus groups is the lack of nonverbal cues among participants, which could limit group interactions and dynamics during the focus group discussion. To overcome this limitation, we supplemented telephone focus groups with webinar technology in a recent evaluation of a provincial public health program in Ontario, Canada. In this article, we share the methods used and our experiences in conducting telephone focus groups supplemented with webinar technology, including advantages and challenges. Our experience will inform other researchers who may consider using telephone focus groups with webinars in future research and evaluation.

  6. Atomic Structure and Valence: Level II, Unit 10, Lesson 1; Chemical Bonding: Lesson 2; The Table of Elements: Lesson 3; Electrolysis: Lesson 4. Advanced General Education Program. A High School Self-Study Program.

    Science.gov (United States)

    Manpower Administration (DOL), Washington, DC. Job Corps.

    This self-study program for high-school level contains lessons on: Atomic Structure and Valence, Chemical Bonding, The Table of Elements, and Electrolysis. Each of the lessons concludes with a Mastery Test to be completed by the student. (DB)

  7. Life Functions and Cells: Level II, Unit 7, Lesson 1; Cell Structure: Lesson 2; Tissues, Organs, Systems: Lesson 3; Growth and Nutrition: Lesson 4; Metabolism: Lesson 5. Advanced General Education Program. A High School Self-Study Program.

    Science.gov (United States)

    Manpower Administration (DOL), Washington, DC. Job Corps.

    This self-study program for high-school level contains lessons on: Life Functions and Cells; Cell Structure; Tissues, Organs, Systems; Growth and Nutrition; and Metabolism. Each of the lessons concludes with a Mastery Test to be completed by the student. (DB)

  8. Basic EMC technology advancement for C(3) systems: SHIELD. Volume 4B. A digital computer program for computing crosstalk between shielded cables

    Science.gov (United States)

    Paul, C. R.

    1982-11-01

    This report contains the description and verification of a digital computer program, SHIELD, to be used in the prediction of crosstalk in transmission lines consisting of unshielded wires and/or shielded cables. The line may be above a ground plane (Type 1) or within an overall, circular, cylindrical shield which may be solid or braided and a wire (the shielded wire) located concentrically on the axis of the shield. All wires may be stranded and all conductors are treated as imperfect conductors; that is, their per-unit-length impedances are nonzero. Through-braid coupling for braided shields as well as diffusion for both types are included in the model. The shielded cables may have exposed sections at either end (pigtail sections) in which the shielded wire is not covered by the shield. Over these pigtail sections, a pigtail wire, parallel to the shielded wire, connects the shield to the reference conductor at that end via either a short circuit or an open circuit. These pigtail sections are included in the representation to simulate the common practice of terminating a shielded cable in a connector via these pigtail wires. The pigtail sections may be of different lengths. The program is written in FORTRAN IV and should be implementable on a wide range of digital computers.

  9. Programming industrial robots using advanced input-output devices: test-case example using a CAD package and a digital pen based on the Anoto technology

    Directory of Open Access Journals (Sweden)

    J. Norberto Pires

    2007-08-01

    Full Text Available Interaction with robot systems for specification of manufacturing tasks and motions needs to be simple, to enable wide-spread use of robots in SMEs. In the best case, existing practices from manual work could be used, to smoothly let current employees start using robot technology as a natural part of their work. Our aim is to simplify the robot programming task by allowing the user to simply make technical drawings on a sheet of paper. Craftsman use paper and raw sketches for several situations; to share ideas, to get a better imagination or to remember the customer situation. Currently these sketches have either to be interpreted by the worker when producing the final product by hand, or transferred into CAD file using an according tool. The former means that no automation is included, the latter means extra work and much experience in using the CAD tool. Our approach is to use the digital pen and paper from Anoto as input devices for SME robotic tasks, thereby creating simpler and more user friendly alternatives for programming, parameterization and commanding actions. To this end, the basic technology has been investigated and fully working prototypes have been developed to explore the possibilities and limitation in the context of typical SME applications. Based on the encouraging experimental results, we believe that drawings on digital paper will, among other means of human-robot interaction, play

  10. Advanced Gas Cooled Nuclear Reactor Materials Evaluation and Development program. Progress report, October 1, 1981-December 31, 1981. [Alloy-MA-956; alloy-MA-754

    Energy Technology Data Exchange (ETDEWEB)

    Kimball, O.F.

    1982-06-15

    Work covered in this report includes the activities associated with the status of the simulated reactor helium supply systems and testing equipment. The progress in the screening test program is descibed; this includes: screening creep results and metallographic analysis for materials thermally exposed or tested at 750/sup 0/, 850/sup 0/, 950/sup 0/ and 1050/sup 0/C (1382/sup 0/, 1562/sup 0/, 1742/sup 0/, and 1922/sup 0/F) in controlled-purity helium. The status of creep-rupture in controlled-purity helium and air and fatigue testing in the controlled-purity helium in the intensive screening test program is discussed. The results of metallographic studies of screening alloys exposed in controlled-purity helium for 3000 hours at 750/sup 0/C and 5500 hours at 950/sup 0/C, 3000 hours at 1050/sup 0/C and 6000 hours at 1050/sup 0/C and for weldments exposed in controlled-purity helium for 6000 hours at 750/sup 0/C and 6000 hours at 1050/sup 0/C are presented and discussed.

  11. Advance of the National Program of Radiological Protection and Safety for medical diagnostic with X-rays; Avance del Programa Nacional de Proteccion y Seguridad Radiologica para diagnostico medico con rayos X

    Energy Technology Data Exchange (ETDEWEB)

    Verdejo S, M. [Direccion de Riesgos Radiologicos, Direccion General de Salud Ambiental (Mexico)

    1999-07-01

    The National Program of Radiological Protection and Safety for medical diagnostic with X-ray (Programa Nacional de Proteccion y Seguridad Radiologica para diagnostico medico con rayos X) was initiated in the General Direction of Environmental Health (Direccion General de Salud Ambiental) in 1995. Task coordinated with different dependences of the Public Sector in collaboration between the Secretary of Health (Secretaria de Salud), the National Commission of Nuclear Safety and Safeguards (Comision Nacional de Seguridad Nuclear y Salvaguardias) and, the National Institute of Nuclear Research (Instituto Nacional de Investigaciones Nucleares). The surveillance to the fulfilment of the standardization in matter of Radiological Protection and Safety in the medical diagnostic with X-rays has been obtained for an important advance in the Public sector and it has been arousing interest in the Private sector. (Author)

  12. AdvanceVT Newsletter 30 - Mar 2010

    OpenAIRE

    AdvanceVT

    2010-01-01

    Inside this issue: Future Faculty Program; Academic Pipeline Research; Advancing Diversity Workshop National Science Foundation AdvanceVT, Peggy Layne—Director, Robyn Duncan—Assistant, Molly Hall—GA AdvanceVT would like to thank the National Science Foundation (Grant # HRD 0244916) and Virginia Tech. Any opinions, findings, conclusions, or recommendations expressed are those of the authors and do not necessarily reflect the views of the National Science Foundation. AdvanceVT is a ...

  13. AdvanceVT Newsletter 37 - Apr 2013

    OpenAIRE

    AdvanceVT

    2013-01-01

    Inside this issue: Advancing Diversity Workshop Report; 4th Annual Future Faculty Program National Science Foundation AdvanceVT, Peggy Layne—Director, Kathy Murphy—Assistant, Elsa Camargo—GA AdvanceVT would like to thank the National Science Foundation (Grant # HRD 0244916) and Virginia Tech. Any opinions, findings, conclusions, or recommendations expressed are those of the authors and do not necessarily reflect the views of the National Science Foundation. AdvanceVT assists Virgi...

  14. AdvanceVT Newsletter 06 - Nov 2004

    OpenAIRE

    AdvanceVT

    2004-01-01

    Inside this issue: Upcoming Event: Advancing Women at Virginia Tech; New Full-Time, Tenure Track Faculty by Gender; Women Professors at Virginia Tech Fall 2004; College and Department Endowed Professorships & Chairs, June 2004; College Level Administrators and Department Heads June 2004; NEW AdvanceVT Leadership Development Program; AdvanceVT Faculty Development and Support Opportunities Increasing the representation and advancement of women in academic science and engineering careers A...

  15. Advanced computer technology - An aspect of the Terminal Configured Vehicle program. [air transportation capacity, productivity, all-weather reliability and noise reduction improvements

    Science.gov (United States)

    Berkstresser, B. K.

    1975-01-01

    NASA is conducting a Terminal Configured Vehicle program to provide improvements in the air transportation system such as increased system capacity and productivity, increased all-weather reliability, and reduced noise. A typical jet transport has been equipped with highly flexible digital display and automatic control equipment to study operational techniques for conventional takeoff and landing aircraft. The present airborne computer capability of this aircraft employs a multiple computer simple redundancy concept. The next step is to proceed from this concept to a reconfigurable computer system which can degrade gracefully in the event of a failure, adjust critical computations to remaining capacity, and reorder itself, in the case of transients, to the highest order of redundancy and reliability.

  16. Teaching evidence-based practice in a distance education occupational therapy doctoral program: strategies for professional growth and advancing the profession.

    Science.gov (United States)

    Reynolds, Stacey

    2010-01-01

    ABSTRACT The Centennial Vision of the American Occupational Therapy Association (AOTA) projects that by 2017 all occupational therapy (OT) practice areas will be supported by evidence. Achieving this goal requires preparing clinicians with the skills to assimilate, analyze, and apply research to their areas of practice and communicate the value of OT services to consumers and payers. These skills are at the heart of evidence-based practice (EBP). Educators must be prepared to teach EBP skills in both entry-level and postprofessional programs. This article outlines how EBP can be taught to postprofessional occupational therapy clinical doctoral students using a distance education format. Key features of a successful EBP course include having access to full-text electronic articles, opportunities for students to explore the literature in their own areas of interest, consistent and timely feedback on written work and discussion topics, and opportunities to collaborate with peers.

  17. The effect of a maturing antiretroviral program on early mortality for patients with advanced immune-suppression in Soweto, South Africa.

    Directory of Open Access Journals (Sweden)

    Kennedy N Otwombe

    Full Text Available We hypothesize that time to initiate care and maturity of a treatment program impact on outcome of severely immuno-compromised patients with higher risk of mortality.We conducted a retrospective cohort analysis at the Perinatal HIV Research Unit Adult ART clinic, Soweto, South Africa.ELIGIBILITY CRITERIA FOR THIS ANALYSIS WERE: attendance for minimum one visit between August 2004 and August 2010, age >18 years, CD4 count < 50 cells/mm(3 and ART-naïve at screening. We followed participants up to one year after ART initiation. We defined years 2004-2007 and 2008-2010 as the early and late eras respectively. Chi-square test and survival analysis methods were used for mortality comparisons between eras.Of 2357 patients eligible for antiretroviral treatment, 395 (17% had CD4 counts < 50 cells/mm(3 and ART-naïve at screening. Overall 261 (66% were women. Patients had similar median age (35 vs. 33.5 years, p=0.08, time to HAART initiation (7 days, p=0.18 and baseline CD4 count (20 vs. 23 cells/mm(3, p=0.5 between eras. Overall 63 (16% patients died in their first year of treatment (2 per 100 person-months and the main cause of death was tuberculosis (n=23, 37%. The proportion of deaths (52/262 vs. 11/133, p=0.003 and time to death from enrolment (logrank p=0.04 were significantly different between eras.Mortality decreased as the ART program matured in Soweto while time to initiation of treatment remained similar in both eras. Because ART guidelines were consistent during both eras, it is possible that with time, management of patients improved as expertise was gained.

  18. Advancing Leadership

    Directory of Open Access Journals (Sweden)

    Penny L. Tenuto

    2014-04-01

    Full Text Available Preparing students to become active citizens and contributors to a democratic society is premised on teaching democratic principles and modeling standards of democratic practice at all levels of education. The purpose of this integrative literature review is to establish a conceptual framework grounded in literature and a model for cultivating democratic professional practice in education (DPPE to advance leadership for school improvement. This work is presented in three parts: (a a review of historical references, reports, and legislation that culminated in increased accountability and standards in P-12 public education; (b a discussion of social patterns in education generally associated with bureaucracy versus democracy; and (c a new contribution to the literature, a model for cultivating DPPE is conceptualized to encourage leading and teaching professionals to reflect on beliefs and evaluate practices in advancing leadership for school improvement. Recommendations are included for further research.

  19. Advanced Virgo

    CERN Multimedia

    Virgo, a first-generation interferometric gravitational wave (GW) detector, located in the European Gravitational Observatory, EGO, Cascina (Pisa-Italy) and constructed by the collaboration of French and Italian institutes (CNRS and INFN) has successfully completed its long-duration data taking runs. It is now undergoing a fundamental upgrade that exploits available cutting edges technology to open an exciting new window on the universe, with the first detection of a gravitational wave signal. Advanced Virgo (AdV) is the project to upgrade the Virgo detector to a second-generation instrument. AdV will be able to scan a volume of the Universe 1000 times larger than initial Virgo. AdV will be hosted in the same infrastructures as Virgo. The Advanced VIRGO project is funded and at present carried on by a larger collaboration of institutes belonging to CNRS- France , RMKI - Hungary, INFN- Italy, Nikhef - The Netherlands Polish Academy of Science - Poland.

  20. Pediatric advanced life support and sedation of pediatric dental patients

    OpenAIRE

    Kim, Jongbin

    2016-01-01

    Programs provided by the Korea Association of Cardiopulmonary Resuscitation include Basic Life Support (BLS), Advanced Cardiac Life Support (ACLS), Pediatric Advanced Life Support (PALS), and Korean Advanced Life Support (KALS). However, programs pertinent to dental care are lacking. Since 2015, related organizations have been attempting to develop a Dental Advanced Life Support (DALS) program, which can meet the needs of the dental environment. Generally, for initial management of emergency ...