WorldWideScience

Sample records for profiles obtained independently

  1. Radiometric measurement independent of profile. Belt weighers

    International Nuclear Information System (INIS)

    Otto, J.

    1986-01-01

    Radiometric measuring techniques allow contactless determination of the material carried by belt conveyors. Data defining the material is obtained via attenuation of gamma rays passing through the material on the belt. The method applies the absorption law according to Lambert-Beer, which has to be corrected by a build-up factor because of the stray radiation induced by the Compton effect. The profile-dependent error observed with conventional radiometric belt weighers is caused by the non-linearity of the absorption law in connection with the simultaneous summation of the various partial rays in a detector. The scanning method allows separate evaluation of the partial rays' attenuation and thus yields the correct data of the material carried, regardless of the profile. The scanning method is applied on a finite number of scanning sections, and a residual error has to be taken into account. The stochastics of quantum emission and absorption leads to an error whose expectation value is to be taken into account in the scanning algorithm. As the conveyor belt is in motion during the process of measurements, only part of the material conveyed is irradiated. The resulting assessment error is investigated as a function of the autocorrelation function of the material on the belt. (orig./HP) [de

  2. Company profile: Big changes revive independent's profits

    International Nuclear Information System (INIS)

    Tippee, B.

    1996-01-01

    In 4 years' time, American Exploration has changed from an aggressive acquirer and manager of producing properties for institutional investors into a geographically focused independent producer dedicated to making money by finding and producing oil and gas. Through its adaptations to unexpectedly stagnant oil prices, American Exploration reflects the type of top-to-bottom changes many independent producers have made to survive a brutal decade. It also demonstrates that an independent producer can prosper in the absence of ever-rising prices: the company reported net income of $3.9 million last year following a $54.8 million loss--much of it related to an accounting change--in 1994 and a string of losses before that. In an interview with Oil and Gas Journal, Andrews discussed his company's transformation and financial turnaround, his new appreciation for the balance between capital and technology, and future directions of his company and industry

  3. Molecular profiling of Vitis vinifera Chardonnay obtained by somatic embryogenesis

    Directory of Open Access Journals (Sweden)

    Christophe Bertsch

    2003-12-01

    Full Text Available With the help of microsatellite profiling, we showed that Vitis vinifera Chardonnay clone 96 is a periclinal chimera plant which is composed at least of two distinct cell layers. Performing somatic embryogenesis allowed us to separate the two cell layers and to regenerate L1 plants. These regenerated L1 plants did not show phenotypic differences to the parental clone when grown in greenhouse conditions, suggesting therefore that the phenotype of Chardonnay 96 did not result of an interaction between the two distinct cell layers L1 and L2.

  4. Psychodemographic profile of stockpeople working on independent and integrated swine breeding farms in Quebec.

    Science.gov (United States)

    Ravel, A; D'Allaire, S; Bigras-Poulin, M; Ward, R

    1996-01-01

    As a part of a larger study, the psychodemographic profile of Quebec pig stockpeople was described based on a sample of 48 persons working on independent farms randomly selected in the Richelieu-Saint-Hyacinthe region, and on a convenience sample of 38 others employed by 5 organizations of integrated swine production chosen among the largest ones in Québec. The 2 groups of stockpeople were described separately because of the differences between the 2 types of production. Demographic data (age, sex, level of education, training and experience in swine production, seniority on the farm) were obtained through a face-to-face interview. The personality profile was assessed using a standard personality test (French translation of the Sixteen Personality Factor Questionnaire). Both the stockpersons on independent farms and those employed by the organizations were more reserved, emotionally stable, serious, conscientious, unsentimental, controlled, introverted, and less anxious than the average person in the general population. However, multivariate analyses revealed some differences between these two groups of stock-persons (P = 0.021) as well as between the employees of the different organizations (P = 0.0038). These differences in personality profiles may reflect differences in working conditions, particularly regarding the human relationships, and in corporate cultures of the organizations. PMID:8904659

  5. Techniques for obtaining velocity distributions of atoms or ions from Doppler-broadened spectral line profiles

    International Nuclear Information System (INIS)

    Moran, T.G.

    1986-12-01

    Analysis of the doppler-broadened profiles of spectral lines radiated by atoms or ions in plasmas yields information about their velocity distributions. Researchers have analysed profiles of lines radiated by atoms in isotropic velocity distributions in several ways, one being the inversion of the integral equation which relates the velocity distribution to the line profile. This inversion formula was derived for a separate application and was given to within an arbitrary multiplicative constant. This paper presents a new derivation which obtains the inversion exactly, using a method which is easily generalized for determination of anisotropic velocity distribution functions. The technique to obtain an anisotropic velocity distribution function from line profiles measured at different angles is outlined

  6. Ethical frameworks for obtaining informed consent in tumour profiling: an evidence-based case for Singapore.

    Science.gov (United States)

    Bylstra, Yasmin; Lysaght, Tamra; Thrivikraman, Jyothi; Watson, Sangeetha; Tan, Patrick

    2017-12-08

    Genomic profiling of malignant tumours has assisted clinicians in providing targeted therapies for many serious cancer-related illnesses. Although the characterisation of somatic mutations is the primary aim of tumour profiling for treatment, germline mutations may also be detected given the heterogenous origin of mutations observed in tumours. Guidance documents address the return of germline findings that have health implications for patients and their genetic relations. However, the implications of discovering a potential but unconfirmed germline finding from tumour profiling are yet to be fully explored. Moreover, as tumour profiling is increasingly applied in oncology, robust ethical frameworks are required to encourage large-scale data sharing and data aggregation linking molecular data to clinical outcomes, to further understand the role of genetics in oncogenesis and to develop improved cancer therapies. This paper reports on the results of empirical research that is broadly aimed at developing an ethical framework for obtaining informed consent to return results from tumour profiling tests and to share the biomolecular data sourced from tumour tissues of cancer patients. Specifically, qualitative data were gathered from 36 semi-structured interviews with cancer patients and oncology clinicians at a cancer treatment centre in Singapore. The interview data indicated that patients had a limited comprehension of cancer genetics and implications of tumour testing. Furthermore, oncology clinicians stated that they lacked the time to provide in depth explanations of the tumour profile tests. However, it was accepted from both patients and oncologist that the return potential germline variants and the sharing of de-identified tumour profiling data nationally and internationally should be discussed and provided as an option during the consent process. Findings provide support for the return of tumour profiling results provided that they are accompanied with an

  7. InxGa1-xAs obtained from independent target via co-sputtering deposition

    International Nuclear Information System (INIS)

    Bernal-Correa, R; Torres-Jaramillo, S.; Pulzara-Mora, C.

    2017-01-01

    This paper is focused on the preparation of InGaAs thin films on GaAs substrates by r.f. magnetron sputtering technique, using the sputtering power as control means for the formation of different stoichiometries. Results of X-ray and Raman spectroscopy allowed corroborating the formation of In x Ga 1-x As in different concentrations, identifying peaks associated with crystallographic planes (X-rays) and characteristic vibrational phonon modes (Raman). An analysis performed with the Secondary Ion Mass Spectroscopy (SIMS) and X-ray Photoelectron Spectroscopy (XPS) techniques, allowed discussing on the composition in each of the layers. Finally, an alternative in obtaining the ternary semiconductor with polycrystalline structure and preferential growth along the direction (111) was demonstrated and generated by a technique different from the epitaxial techniques, which are commonly used for the growth of III-V semiconductors. (paper)

  8. Biological activity and chemical profile of Lavatera thuringiaca L. extracts obtained by different extraction approaches.

    Science.gov (United States)

    Mašković, Pavle Z; Veličković, Vesna; Đurović, Saša; Zeković, Zoran; Radojković, Marija; Cvetanović, Aleksandra; Švarc-Gajić, Jaroslava; Mitić, Milan; Vujić, Jelena

    2018-01-01

    Lavatera thuringiaca L. is herbaceous perennial plant from Malvaceae family, which is known for its biological activity and richness in polyphenolic compounds. Despite this, the information regarding the biological activity and chemical profile is still insufficient. Aim of this study was to investigate biological potential and chemical profile of Lavatera thuringiaca L., as well as influence of applied extraction technique on them. Two conventional and four non-conventional extraction techniques were applied in order to obtain extracts rich in bioactive compound. Extracts were further tested for total phenolics, flavonoids, condensed tannins, gallotannins and anthocyanins contents using spectrophotometric assays. Polyphenolic profile was established using HPLC-DAD analysis. Biological activity was investigated regarding antioxidant, cytotoxic and antibacterial activities. Four antioxidant assays were applied as well as three different cell lines for cytotoxic and fifteen bacterial strain for antibacterial activity. Results showed that subcritical water extraction (SCW) dominated over the other extraction techniques, where SCW extract exhibited the highest biological activity. Study indicates that plant Lavatera thuringiaca L. may be used as a potential source of biologically compounds. Copyright © 2017 Elsevier GmbH. All rights reserved.

  9. An Optimal Estimation Method to Obtain Surface Layer Turbulent Fluxes from Profile Measurements

    Science.gov (United States)

    Kang, D.

    2015-12-01

    In the absence of direct turbulence measurements, the turbulence characteristics of the atmospheric surface layer are often derived from measurements of the surface layer mean properties based on Monin-Obukhov Similarity Theory (MOST). This approach requires two levels of the ensemble mean wind, temperature, and water vapor, from which the fluxes of momentum, sensible heat, and water vapor can be obtained. When only one measurement level is available, the roughness heights and the assumed properties of the corresponding variables at the respective roughness heights are used. In practice, the temporal mean with large number of samples are used in place of the ensemble mean. However, in many situations the samples of data are taken from multiple levels. It is thus desirable to derive the boundary layer flux properties using all measurements. In this study, we used an optimal estimation approach to derive surface layer properties based on all available measurements. This approach assumes that the samples are taken from a population whose ensemble mean profile follows the MOST. An optimized estimate is obtained when the results yield a minimum cost function defined as a weighted summation of all error variance at each sample altitude. The weights are based one sample data variance and the altitude of the measurements. This method was applied to measurements in the marine atmospheric surface layer from a small boat using radiosonde on a tethered balloon where temperature and relative humidity profiles in the lowest 50 m were made repeatedly in about 30 minutes. We will present the resultant fluxes and the derived MOST mean profiles using different sets of measurements. The advantage of this method over the 'traditional' methods will be illustrated. Some limitations of this optimization method will also be discussed. Its application to quantify the effects of marine surface layer environment on radar and communication signal propagation will be shown as well.

  10. Determination of Contamination Profiles of Human Bacterial Pathogens in Shrimp Obtained from Java, Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Dewanti-Hariyadi, R. [Center for Assessment of Traditional Foods, Department of Food Technology and Human Nutrition, Bogor Agricultural University (Indonesia); Suliantari,; Nuraida, L. [Department of Food Technology and Human Nutrition, Faculty of Agricultural Technology, Bogor Agricultural University (Indonesia); Fardiaz, S. [Inter University for Food and Nutrition, Bogor Agricultural University, Bogor (Indonesia)

    2005-01-15

    Shrimp continues to be an important export commodity for Indonesia and contributed significantly to the country’s revenue. However, shrimp exports have been frequently rejected by importing countries due to filth, Salmonella and insanitary conditions. This study was conducted to evaluate the profiles of bacterial contamination of ocean and aquaculture shrimp obtained from the area of West, Central and East Java; frozen shrimp and shrimp during industry production of frozen shrimp. The study indicated that both ocean and aquaculture shrimp obtained from the study area were heavily contaminated. On the average, shrimp obtained from West Java were more contaminated than those obtained from East and Central Java. The total bacterial counts were generally higher in ocean shrimp than those of aquaculture ones. Salmonella was present in two of 32 samples of ocean shrimp and in four of 32 samples of aquaculture shrimp obtained from the study area. Vibrio cholerae was not detected in shrimp from West Java, but was found in three out of 16 samples obtained from East and Central Java. V. parahaemolyticus was frequently identified in aquaculture shrimp but absent in fresh ocean shrimp. Studies on shrimp collected from six sampling points during frozen shrimp production revealed that processing will reduce the number of total bacterial, E. coli, and Staphylococal counts. However, the processing did not effectively reduce the incidence of Salmonella or V. parahaemolyticus when the raw material has been contaminated with the pathogens. Sizing and grading as well as arrangement of shrimp before freezing were considered as the critical points where bacteria should be controlled to inhibit growth and cross contamination with bacteria such as Listeria. Implementation of Good Agricultural Practices in production of raw shrimp as well as Hazard Analysis Critical Control Point at the line processing are expected to improve the quality of fresh and frozen shrimp. (author)

  11. Comparison of inverse Laplace and numerical inversion methods for obtaining z-depth profiles of diffraction data

    International Nuclear Information System (INIS)

    Xiaojing Zhu; Predecki, P.; Ballard, B.

    1995-01-01

    Two different inversion methods, the inverse Laplace method and the linear constrained numerical method, for retrieving the z-profiles of diffraction data from experimentally obtained i-profiles were compared using tests with a known function as the original z-profile. Two different real data situations were simulated to determine the effects of specimen thickness and missing τ-profile data at small τ-values on the retrieved z-profiles. The results indicate that although both methods are able to retrieve the z-profiles in the bulk specimens satisfactorily, the numerical method can be used for thin film samples as well. Missing τ-profile data at small τ values causes error in the retrieved z-profiles with both methods, particularly when the trend of the τ-profile at small τ is significantly changed because of the missing data. 6 refs., 3 figs

  12. Analysis of culture-dependent versus culture-independent techniques for identification of bacteria in clinically obtained bronchoalveolar lavage fluid.

    Science.gov (United States)

    Dickson, Robert P; Erb-Downward, John R; Prescott, Hallie C; Martinez, Fernando J; Curtis, Jeffrey L; Lama, Vibha N; Huffnagle, Gary B

    2014-10-01

    The diagnosis and management of pneumonia are limited by the use of culture-based techniques of microbial identification, which may fail to identify unculturable, fastidious, and metabolically active viable but unculturable bacteria. Novel high-throughput culture-independent techniques hold promise but have not been systematically compared to conventional culture. We analyzed 46 clinically obtained bronchoalveolar lavage (BAL) fluid specimens from symptomatic and asymptomatic lung transplant recipients both by culture (using a clinical microbiology laboratory protocol) and by bacterial 16S rRNA gene pyrosequencing. Bacteria were identified in 44 of 46 (95.7%) BAL fluid specimens by culture-independent sequencing, significantly more than the number of specimens in which bacteria were detected (37 of 46, 80.4%, P ≤ 0.05) or "pathogen" species reported (18 of 46, 39.1%, P ≤ 0.0001) via culture. Identification of bacteria by culture was positively associated with culture-independent indices of infection (total bacterial DNA burden and low bacterial community diversity) (P ≤ 0.01). In BAL fluid specimens with no culture growth, the amount of bacterial DNA was greater than that in reagent and rinse controls, and communities were markedly dominated by select Gammaproteobacteria, notably Escherichia species and Pseudomonas fluorescens. Culture growth above the threshold of 10(4) CFU/ml was correlated with increased bacterial DNA burden (P Microbiology. All Rights Reserved.

  13. Mutational Profiling Can Establish Clonal or Independent Origin in Synchronous Bilateral Breast and Other Tumors.

    Directory of Open Access Journals (Sweden)

    Lei Bao

    Full Text Available Synchronous tumors can be independent primary tumors or a primary-metastatic (clonal pair, which may have clinical implications. Mutational profiling of tumor DNA is increasingly common in the clinic. We investigated whether mutational profiling can distinguish independent from clonal tumors in breast and other cancers, using a carefully defined test based on the Clonal Likelihood Score (CLS = 100 x # shared high confidence (HC mutations/ # total HC mutations.Statistical properties of a formal test using the CLS were investigated. A high CLS is evidence in favor of clonality; the test is implemented as a one-sided binomial test of proportions. Test parameters were empirically determined using 16,422 independent breast tumor pairs and 15 primary-metastatic tumor pairs from 10 cancer types using The Cancer Genome Atlas.We validated performance of the test with its established parameters, using five published data sets comprising 15,758 known independent tumor pairs (maximum CLS = 4.1%, minimum p-value = 0.48 and 283 known tumor clonal pairs (minimum CLS 13%, maximum p-value 0.99, supporting independence. A plausible molecular mechanism for the shift from hormone receptor positive to triple negative was identified in the clonal pair.We have developed the statistical properties of a carefully defined Clonal Likelihood Score test from mutational profiling of tumor DNA. Under identified conditions, the test appears to reliably distinguish between synchronous tumors of clonal and of independent origin in several cancer types. This approach may have scientific and clinical utility.

  14. Vertical profiles of ozone, carbon monoxide, and dew-point temperature obtained during GTE/CITE 1, October-November 1983. [Chemical Instrumentation Test and Evaluation

    Science.gov (United States)

    Fishman, Jack; Gregory, Gerald L.; Sachse, Glen W.; Beck, Sherwin M.; Hill, Gerald F.

    1987-01-01

    A set of 14 pairs of vertical profiles of ozone and carbon monoxide, obtained with fast-response instrumentation, is presented. Most of these profiles, which were measured in the remote troposphere, also have supporting fast-response dew-point temperature profiles. The data suggest that the continental boundary layer is a source of tropospheric ozone, even in October and November, when photochemical activity should be rather small. In general, the small-scale vertical variability between CO and O3 is in phase. At low latitudes this relationship defines levels in the atmosphere where midlatitude air is being transported to lower latitudes, since lower dew-point temperatures accompany these higher CO and O3 concentrations. A set of profiles which is suggestive of interhemispheric transport is also presented. Independent meteorological analyses support these interpretations.

  15. Metabolite profiling and volatiles of pineapple wine and vinegar obtained from pineapple waste.

    Science.gov (United States)

    Roda, Arianna; Lucini, Luigi; Torchio, Fabrizio; Dordoni, Roberta; De Faveri, Dante Marco; Lambri, Milena

    2017-08-15

    Vinegar is an inexpensive commodity, and economic considerations require that a relatively low-cost raw material be used for its production. An investigation into the use of a new, alternative substrate - pineapple waste - is described. This approach enables the utilization of the pineapple's (Ananas comosus) peels and core, which are usually discarded during the processing or consumption of the fruit. Using physical and enzymatic treatments, the waste was saccharified, and the resulting substrate was fermented with Saccharomyces cerevisiae for 7-10days under aerobic conditions at 25°C. This resulted in an alcohol yield of approximately 7%. The alcoholic medium was then used as a seed broth for acetic fermentation using Acetobacter aceti as the inoculum for approximately 30days at 32°C to obtain 5% acetic acid. Samples were analyzed at the beginning and end of the acetification cycle to assess the volatile and fixed compounds by GC-MS and UHPLC-QTOF-MS. The metabolomic analysis indicated that l-lysine, mellein, and gallic acid were significantly more concentrated in the pineapple vinegar than in the original wine. Higher alcohols, aldehydes, and ketones characterized the aroma of the final pineapple vinegar, whilst off-flavors were significantly reduced relative to the initial wine. This study is the first to highlight the metabolite profile of fruit vinegar with a slight floral aroma profile derived from pineapple waste. The potential to efficiently reduce the post-harvest losses of pineapple fruits by re-using them for products with added food values is also demonstrated. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Determination of the meniscus shape of a negative ion beam from an experimentally obtained beam profile

    Science.gov (United States)

    Ichikawa, M.; Kojima, A.; Chitarin, G.; Agostinetti, P.; Aprile, D.; Baltador, C.; Barbisan, M.; Delogu, R.; Hiratsuka, J.; Marconato, N.; Nishikiori, R.; Pimazzoni, A.; Sartori, E.; Serianni, G.; Tobari, H.; Umeda, N.; Veltri, P.; Watanabe, K.; Yoshida, M.; Antoni, V.; Kashiwagi, M.

    2017-08-01

    In order to understand the physics mechanism of a negative ion extraction in negative ion sources, an emission surface of the negative ions around an aperture at a plasma grid, so-called a meniscus, has been analyzed by an inverse calculation of the negative ion trajectory in a two dimensional beam analysis code. In this method, the meniscus is defined as the final position of the negative ion trajectories which are inversely calculated from the measured beam profile to the plasma grid. In a case of the volume-produced negative ions, the calculated meniscus by the inverse calculation was similar to that obtained in conventional beam simulation codes for positive ion extractions such as BEAMORBT and SLACCAD. The negative ion current density was uniform along the meniscus. This indicates that the negative ions produced in the plasma are transported to the plasma grid uniformly as considered in the transportation of the positive ions. However, in a surface production case of negative ions, where the negative ions are generated near the plasma grid with lower work function by seeding cesium, the current density in the peripheral region of the meniscus close to the plasma grid surface was estimated to be 2 times larger than the center region, which suggested that the extraction process of the surface-produced negative ions was much different with that for the positive ions. Because this non-uniform profile of the current density made the meniscus shape strongly concave, the beam extracted from the peripheral region could have a large divergence angle, which might be one of origins of so-called beam halo. This is the first results of the determination of the meniscus based on the experiment, which is useful to improve the prediction of the meniscus shape and heat loads based on the beam trajectories including beam halo.

  17. SU-E-T-209: Independent Dose Calculation in FFF Modulated Fields with Pencil Beam Kernels Obtained by Deconvolution

    International Nuclear Information System (INIS)

    Azcona, J; Burguete, J

    2014-01-01

    Purpose: To obtain the pencil beam kernels that characterize a megavoltage photon beam generated in a FFF linac by experimental measurements, and to apply them for dose calculation in modulated fields. Methods: Several Kodak EDR2 radiographic films were irradiated with a 10 MV FFF photon beam from a Varian True Beam (Varian Medical Systems, Palo Alto, CA) linac, at the depths of 5, 10, 15, and 20cm in polystyrene (RW3 water equivalent phantom, PTW Freiburg, Germany). The irradiation field was a 50 mm diameter circular field, collimated with a lead block. Measured dose leads to the kernel characterization, assuming that the energy fluence exiting the linac head and further collimated is originated on a point source. The three-dimensional kernel was obtained by deconvolution at each depth using the Hankel transform. A correction on the low dose part of the kernel was performed to reproduce accurately the experimental output factors. The kernels were used to calculate modulated dose distributions in six modulated fields and compared through the gamma index to their absolute dose measured by film in the RW3 phantom. Results: The resulting kernels properly characterize the global beam penumbra. The output factor-based correction was carried out adding the amount of signal necessary to reproduce the experimental output factor in steps of 2mm, starting at a radius of 4mm. There the kernel signal was in all cases below 10% of its maximum value. With this correction, the number of points that pass the gamma index criteria (3%, 3mm) in the modulated fields for all cases are at least 99.6% of the total number of points. Conclusion: A system for independent dose calculations in modulated fields from FFF beams has been developed. Pencil beam kernels were obtained and their ability to accurately calculate dose in homogeneous media was demonstrated

  18. Independent component analysis for the extraction of reliable protein signal profiles from MALDI-TOF mass spectra.

    Science.gov (United States)

    Mantini, Dante; Petrucci, Francesca; Del Boccio, Piero; Pieragostino, Damiana; Di Nicola, Marta; Lugaresi, Alessandra; Federici, Giorgio; Sacchetta, Paolo; Di Ilio, Carmine; Urbani, Andrea

    2008-01-01

    Independent component analysis (ICA) is a signal processing technique that can be utilized to recover independent signals from a set of their linear mixtures. We propose ICA for the analysis of signals obtained from large proteomics investigations such as clinical multi-subject studies based on MALDI-TOF MS profiling. The method is validated on simulated and experimental data for demonstrating its capability of correctly extracting protein profiles from MALDI-TOF mass spectra. The comparison on peak detection with an open-source and two commercial methods shows its superior reliability in reducing the false discovery rate of protein peak masses. Moreover, the integration of ICA and statistical tests for detecting the differences in peak intensities between experimental groups allows to identify protein peaks that could be indicators of a diseased state. This data-driven approach demonstrates to be a promising tool for biomarker-discovery studies based on MALDI-TOF MS technology. The MATLAB implementation of the method described in the article and both simulated and experimental data are freely available at http://www.unich.it/proteomica/bioinf/.

  19. Discrimination of commercial cheeses from fatty acid profiles and phytosterol contents obtained by GC and PCA.

    Science.gov (United States)

    Kim, Nam Sook; Lee, Ji Hyun; Han, Kyoung Moon; Kim, Ji Won; Cho, Sooyeul; Kim, Jinho

    2014-01-15

    In this study, a method for discriminating natural mozzarella cheese from cheese substitutes, using fatty acid profiles, phytosterol contents, and statistical comparison, was developed. A total of 27 cheeses were evaluated: eight natural mozzarella cheeses (NMCs), four imitation mozzarella cheeses (IMCs), 12 processed cheeses (PCs) and three mixed cheeses (MCs) composed of NMCs and IMCs. The fatty acid composition of the NMC class was distinct from those of the IMC and MC classes, but statistically similar (pIMCs, but similar (pIMCs, but discrimination between the NMCs and the PCs could not be achieved. Copyright © 2013 Elsevier Ltd. All rights reserved.

  20. A Metacognitive Profile of Vocational High School Student’s Field Independent in Mathematical Problem Solving

    Science.gov (United States)

    Nugraheni, L.; Budayasa, I. K.; Suwarsono, S. T.

    2018-01-01

    The study was designed to discover examine the profile of metacognition of vocational high school student of the Machine Technology program that had high ability and field independent cognitive style in mathematical problem solving. The design of this study was exploratory research with a qualitative approach. This research was conducted at the Machine Technology program of the vocational senior high school. The result revealed that the high-ability student with field independent cognitive style conducted metacognition practices well. That involved the three types of metacognition activities, consisting of planning, monitoring, and evaluating at metacognition level 2 or aware use, 3 or strategic use, 4 or reflective use in mathematical problem solving. The applicability of the metacognition practices conducted by the subject was never at metacognition level 1 or tacit use. This indicated that the participant were already aware, capable of choosing strategies, and able to reflect on their own thinking before, after, or during the process at the time of solving mathematical problems.That was very necessary for the vocational high school student of Machine Technology program.

  1. Magnetic resonance metabolic profiling of breast cancer tissue obtained with core needle biopsy for predicting pathologic response to neoadjuvant chemotherapy.

    Directory of Open Access Journals (Sweden)

    Ji Soo Choi

    Full Text Available The purpose of this study was to determine whether metabolic profiling of core needle biopsy (CNB samples using high-resolution magic angle spinning (HR-MAS magnetic resonance spectroscopy (MRS could be used for predicting pathologic response to neoadjuvant chemotherapy (NAC in patients with locally advanced breast cancer. After institutional review board approval and informed consent were obtained, CNB tissue samples were collected from 37 malignant lesions in 37 patients before NAC treatment. The metabolic profiling of CNB samples were performed by HR-MAS MRS. Metabolic profiles were compared according to pathologic response to NAC using the Mann-Whitney test. Multivariate analysis was performed with orthogonal projections to latent structure-discriminant analysis (OPLS-DA. Various metabolites including choline-containing compounds were identified and quantified by HR-MAS MRS in all 37 breast cancer tissue samples obtained by CNB. In univariate analysis, the metabolite concentrations and metabolic ratios of CNB samples obtained with HR-MAS MRS were not significantly different between different pathologic response groups. However, there was a trend of lower levels of phosphocholine/creatine ratio and choline-containing metabolite concentrations in the pathologic complete response group compared to the non-pathologic complete response group. In multivariate analysis, the OPLS-DA models built with HR-MAS MR metabolic profiles showed visible discrimination between the pathologic response groups. This study showed OPLS-DA multivariate analysis using metabolic profiles of pretreatment CNB samples assessed by HR- MAS MRS may be used to predict pathologic response before NAC, although we did not identify the metabolite showing statistical significance in univariate analysis. Therefore, our preliminary results raise the necessity of further study on HR-MAS MR metabolic profiling of CNB samples for a large number of cancers.

  2. Atmospheric Profiles of Carbon Dioxide Obtained with a UAS: Constraints on Square Kilometre Scale Carbon Budgets

    Science.gov (United States)

    Kunz, M.; Lavric, J. V.; Grant, R. H.; Gerbig, C.; Heimann, M.; Flatt, J. E.; Zeeman, M. J.; Wolf, B.

    2016-12-01

    The exchange of carbon between biosphere and atmosphere is a topic of high interest, particularly because the magnitude of biospheric climate feedback is uncertain. Soil chambers and eddy covariance systems, the traditional tools for the measurement of exchange fluxes, are subject to inherent limitations: chambers cover only small areas of typically less than on square meter, and eddy covariance is not applicable under very low wind conditions. Complementary methods can help to deal with these limitations and provide more confidence in up-scaling. During the ScaleX 2016 campaign an ecosystem was studied with a combination of multiple measurement approaches, including soil chambers, an eddy covariance station, a weather station, quasi-continuous CO2 measurements on a 10 m tower, multiple UAS with different sensors and remote sensing of temperature, humidity and wind profiles. The campaign took place at Fendt in Southern Germany on a flat valley floor covered by grass. We deployed COCAP, a compact carbon dioxide analyser for airborne platforms developed at the Max Planck Institute for Biogeochemistry in Jena, on a commercial multicopter (DJI S1000). COCAP measures carbon dioxide dry air mole fraction to an accuracy of 2 ppm as well as ambient pressure, temperature and relative humidity. At a total mass of 1 kg it contains a GPS receiver, on-board data logging capabilities and a radio transmitter which allows for real-time data visualisation on a ground station computer. In consecutive vertical profile measurements at night-time, reaching up to a maximum height of 150 m, we see a strong build-up of CO2 close to the ground which we attribute to exchange fluxes from the surface into the atmosphere that are trapped below a nocturnal inversion. We estimate these fluxes from the change in observed column amount of CO2 over time and compare our results to other methods. Challenges in the measurement and data analysis as well as the influence of wind, rotor downwash and

  3. Constraining Saturn's interior density profile from precision gravity field measurement obtained during Grand Finale

    Science.gov (United States)

    Movshovitz, N.; Fortney, J. J.; Helled, R.; Hubbard, W. B.; Mankovich, C.; Thorngren, D.; Wahl, S. M.; Militzer, B.; Durante, D.

    2017-12-01

    The external gravity field of a planetary body is determined by the distribution of mass in its interior. Therefore, a measurement of the external field, properlyinterpreted, tells us about the interior density profile, ρ(r), which in turn can be used to constrain the composition in the interior and thereby learn about theformation mechanism of the planet. Recently, very high precision measurements of the gravity coefficients for Saturn have been made by the radio science instrument on the Cassini spacecraft during its Grand Finale orbits. The resulting coefficients come with an associated uncertainty. The task of matching a given density profile to a given set of gravity coefficients is relatively straightforward, but the question of how to best account for the uncertainty is not. In essentially all prior work on matching models to gravity field data inferences about planetary structure have rested on assumptions regarding the imperfectly known H/He equation of state and the assumption of an adiabatic interior. Here we wish to vastly expand the phase space of such calculations. We present a framework for describing all the possible interior density structures of a Jovian planet constrained by a given set of gravity coefficients and their associated uncertainties. Our approach is statistical. We produce a random sample of ρ(a) curves drawn from the underlying (and unknown) probability distribution of all curves, where ρ is the density on an interior level surface with equatorial radius a. Since the resulting set of density curves is a random sample, that is, curves appear with frequency proportional to the likelihood of their being consistent with the measured gravity, we can compute probability distributions for any quantity that is a function of ρ, such as central pressure, oblateness, core mass and radius, etc. Our approach is also Bayesian, in that it can utilize any prior assumptions about the planet's interior, as necessary, without being overly

  4. Breast cancer: determining the genetic profile from ultrasound-guided percutaneous biopsy specimens obtained during the diagnostic workups.

    Science.gov (United States)

    López Ruiz, J A; Zabalza Estévez, I; Mieza Arana, J A

    2016-01-01

    To evaluate the possibility of determining the genetic profile of primary malignant tumors of the breast from specimens obtained by ultrasound-guided percutaneous biopsies during the diagnostic imaging workup. This is a retrospective study in 13 consecutive patients diagnosed with invasive breast cancer by B-mode ultrasound-guided 12 G core needle biopsy. After clinical indication, the pathologist decided whether the paraffin block specimens seemed suitable (on the basis of tumor size, validity of the sample, and percentage of tumor cells) before sending them for genetic analysis with the MammaPrint® platform. The size of the tumors on ultrasound ranged from 0.6cm to 5cm. In 11 patients the preserved specimen was considered valid and suitable for use in determining the genetic profile. In 1 patient (with a 1cm tumor) the pathologist decided that it was necessary to repeat the core biopsy to obtain additional samples. In 1 patient (with a 5cm tumor) the specimen was not considered valid by the genetic laboratory. The percentage of tumor cells in the samples ranged from 60% to 70%. In 11/13 cases (84.62%) it was possible to do the genetic analysis on the previously diagnosed samples. In most cases, regardless of tumor size, it is possible to obtain the genetic profile from tissue specimens obtained with ultrasound-guided 12 G core biopsy preserved in paraffin blocks. Copyright © 2015 SERAM. Published by Elsevier España, S.L.U. All rights reserved.

  5. BACTERIAL PROFILE OF ASYMPTOMATIC BACTERIURIA IN ANTENATAL WOMEN AND ANTIBIOTIC SUSCEPTIBILITY PATTERN OF THE ISOLATES OBTAINED

    Directory of Open Access Journals (Sweden)

    Lavanya Venkata Sayam

    2017-07-01

    Full Text Available BACKGROUND Urinary tract infection in pregnancy is associated with significant morbidity for both the mother and the baby. The aim of this study was to determine the incidence of asymptomatic bacteriuria, the bacterial profile and antibiotic sensitivity pattern of the urinary pathogens isolated from pregnant women attending the OPD of a teaching hospital in a semi-rural area in the outskirts of Visakhapatnam city. MATERIALS AND METHODS The study group included 500 asymptomatic antenatal women in their first or second trimester of pregnancy. They were screened for bacteriuria by the catalase method. Their mid-stream clean-catch samples of urine were cultured by the standard loop semi-quantitative method. Antibiotic sensitivity was tested by the disc-diffusion method. Culture positive cases were advised to strictly follow treatment to avoid future complications. RESULTS 48 (9.6% of the 500 samples were culture positive. 66.66% (32 cases of the positive cases were primigravida. The incidence was also high in the less than 20 years age group. The frequency of isolating coagulase negative Staphylococcus has increased in the present study. Many of the isolates proved to be ESBLs. CONCLUSION The findings of the study re-confirm the results of the earlier studies conducted in Visakhapatnam and elsewhere, and call for an even more vigilant approach to the problem. Prevalence of CONS was not encountered in the earlier study conducted in a similar demographic area, nor was that of the ESBLs. It has thus been proven that early screening of all pregnant women for urinary tract infection is mandatory for those visiting the obstetrician for antenatal checkups.

  6. Does oppositional defiant disorder have temperament and psychopathological profiles independent of attention deficit/hyperactivity disorder?

    Science.gov (United States)

    Kim, Hyo-Won; Cho, Soo-Churl; Kim, Boong-Nyun; Kim, Jae-Won; Shin, Min-Sup; Yeo, Jin-Young

    2010-01-01

    Most studies on temperamental and behavioral/emotional characteristics of oppositional defiant disorder (ODD) did not rule out the effect of comorbid attention-deficit/hyperactivity disorder (ADHD). The main objective of this study was to identify the temperamental and psychopathological patterns of ODD independent of comorbid ADHD. We also aimed to compare the patterns of temperament and psychopathology between ODD with and without ADHD. Parents of 2673 students, randomly selected from 19 representative schools in Seoul, Korea, completed the Diagnostic Interview Schedule for Children Version IV. Among 118 children and adolescents with ODD diagnosed by the Diagnostic Interview Schedule for Children Version IV, the parents of 94 subjects (mean age, 10.4 +/- 3.0 years) and the parents of a random sample of 94 age- and gender-matched non-ODD/non-ADHD children and adolescents completed the parent's version of the Child Behavior Checklist (CBCL) and the Junior Temperament and Character Inventory. Subjects with ODD showed temperament and character profiles of high Novelty Seeking, low Self-directedness, and low Cooperativeness, a distinct pattern on the CBCL, and were at increased risk for anxiety and mood disorders compared to the controls after controlling for the effect of comorbid ADHD. The children and adolescents with both ODD and ADHD showed decreased levels of Persistence and Self-directedness and higher scores on 4 subscales of the CBCL (Anxious/Depressed, Attention Problems, Delinquent Behaviors, and Aggressive Behaviors) compared to those with ODD only. Oppositional defiant disorder is associated with specific temperamental and behavioral/emotional characteristics, independent of ADHD. Moreover, the results of this study support that co-occurring ADHD and ODD have differentially higher levels of behavioral and emotional difficulties. Copyright 2010 Elsevier Inc. All rights reserved.

  7. Line profile analyses of rhodium metal obtained by decomposition of rhodium carbonyl

    International Nuclear Information System (INIS)

    Chandra, D.; Mandalia, H.; Garner, M.L.; Blakely, M.K.; Lau, K.H.

    1995-01-01

    Metal carbonyls are important for chemical vapor deposition (CVD) of metals and alloys and formation of high surface area metallic particles which have potential applications as catalysts. Rhodium carbonyl [Rh 6 (CO) 16 ] produces high surface area metallic particles whose structure has been reported as monoclinic (I2/a) with lattice dimensions, a=17.00(±0.03)Angstrom, b=9.78(±0.02)Angstrom, c=17.53(±0.03)Angstrom and Β=121 degrees 45' ± 30' at room temperature. Generally, metal carbonyl crystals dissociate under vacuum as carbonyl gas and decompose to metallic crystals and carbon monoxide at higher temperatures. However, the behavior of rhodium carbonyl crystals is different; they decompose directly to metallic rhodium without the formation of rhodium carbonyl gas in vacuum. Several residual fine grains of rhodium metal are found after the decomposition in vacuum at relatively low temperatures. The metallic samples of rhodium were obtained from vapor pressure experiments using torsion Knudsen-effusion apparatus. X-ray diffraction analyses performed on these gains showed severely broadened Bragg reflections indicative of small particle size and/or lattice microgram. In this study, a comparison of lattice strains and domain sizes obtained by integral breadth and Fourier methods has been made. In addition a comparison of the lattice strains and domain sizes has been made between the Cauchy, Gaussian, Cauchy-Gaussian and Aqua integral breadth methods

  8. Obtaining learning independence and academic success through self-assessment and referral to a Mathematics Learning Centre

    Directory of Open Access Journals (Sweden)

    Nadine Adams

    2012-08-01

    Full Text Available Globally, universities are striving to increase enrolment rates, especially for low socioeconomic status and mature-aged students. In order to meet these targets, universities are accepting a broader range of students, often resulting in a widening mathematical knowledge gap between secondary school and university (Hoyles, Newman & Noss, 2001. Therefore, even amid the growing trend of scaling back services, there exists a need for extra learning support in mathematics. Mathematics support services are recognised as vital in assisting students to both bridge the knowledge gap and become independent learners. Through a survey of students using the Mathematics Learning Centre at Central Queensland University Australia, it was found that the implementation of scaffolding, adult learning principles and the embedding of mathematics support provides students with not only fundamental mathematical knowledge but also the skills required to become self-directed learners. 

  9. Obtaining better performance in the measurement-device-independent quantum key distribution with heralded single-photon sources

    Science.gov (United States)

    Zhou, Xing-Yu; Zhang, Chun-Hui; Zhang, Chun-Mei; Wang, Qin

    2017-11-01

    Measurement-device-independent quantum key distribution (MDI-QKD) has been widely investigated due to its remarkable advantages on the achievable transmission distance and practical security. However, the relative low key generation rate limits its real-life implementations. In this work, we adopt the newly proposed four-intensity decoy-state scheme [Phys. Rev. A 93, 042324 (2016), 10.1103/PhysRevA.93.042324] to study the performance of MDI-QKD with heralded single-photon sources (HSPS). Corresponding simulation results demonstrate that the four-intensity decoy-state scheme combining HSPS can drastically improve both the key generation rate and transmission distance in MDI-QKD, which may be very promising in future MDI-QKD systems.

  10. Quality and Trace Element Profile of Tunisian Olive Oils Obtained from Plants Irrigated with Treated Wastewater

    Directory of Open Access Journals (Sweden)

    Cinzia Benincasa

    2012-01-01

    Full Text Available In the present work the use of treated wastewater (TWW to irrigate olive plants was monitored. This type of water is characterized by high salinity and retains a substantial amount of trace elements, organic and metallic compounds that can be transferred into the soil and into the plants and fruits. In order to evaluate the impact of TWW on the overall quality of the oils, the time of contact of the olives with the soil has been taken into account. Multi-element data were obtained using ICP-MS. Nineteen elements (Li, B, Na, Mg, Al, K, Ca, Sc, Cr, Mn, Fe, Co, Ni, Cu, Zn, Sr, Mo, Ba and La were submitted for statistical analysis. Using analysis of variance, linear discriminant analysis and principal component analysis it was possible to differentiate between oils produced from different batches of olives whose plants received different types of water. Also, the results showed that there was correlation between the elemental and mineral composition of the water used to irrigate the olive plots and the elemental and mineral composition of the oils.

  11. Alcohol-independent beneficial cardiometabolic profile of individuals with hyper-HDL cholesterolemia in Japanese men and women.

    Science.gov (United States)

    Wakabayashi, Ichiro; Daimon, Takashi

    2015-01-01

    There is limited information on characterization of individuals with hyper-high-density lipoprotein (HDL) cholesterolemia. The purpose of this study was to investigate the cardiometabolic profile of individuals with hyper-HDL cholesterolemia in comparison with the profile of individuals with normo-HDL cholesterolemia. The subjects were Japanese men and women who had hyper-HDL cholesterolemia (≥100 mg/dL) and their control subjects who had normal HDL cholesterol levels (≥40 and hyper- and normo-HDL cholesterolemic groups. Both in men and women, body mass index, waist-to-height ratio, triglycerides, low-density lipoprotein cholesterol, and hemoglobin A1c were significantly lower in subjects with hyper-HDL cholesterolemia than in subjects with normo-HDL cholesterolemia, whereas systolic and diastolic blood pressure levels were not significantly different between the 2 groups. In generalized estimating equation with adjustment for smoking and regular exercise, odds ratios of the hyper- vs normo-HDL cholesterolemic groups were significantly lower than the reference level of 1.00 for high body mass index, high waist-to-height ratio, hypertriglyceridemia, hyper-low-density lipoprotein cholesterolemia, high lipid accumulation product, and metabolic syndrome. The previously mentioned results were obtained both in age-matched analysis and in age- and alcohol intake-matched analysis, although the percentage of regular drinkers was significantly higher in the hyper-HDL cholesterolemic group than in the age-matched control group. Hyper-HDL cholesterolemia was inversely associated with obesity, dyslipidemia, and metabolic syndrome in the analysis using alcohol intake-matched subject groups. Therefore, the association of hyper-HDL cholesterolemia with lower cardiometabolic risk is thought to be independent of habitual alcohol drinking. Copyright © 2015 National Lipid Association. Published by Elsevier Inc. All rights reserved.

  12. Transcriptional profile of fibroblasts obtained from the primary site, lymph node and bone marrow of breast cancer patients

    Directory of Open Access Journals (Sweden)

    Paulo Roberto Del Valle

    2014-09-01

    Full Text Available Cancer-associated fibroblasts (CAF influence tumor development at primary as well as in metastatic sites, but there have been no direct comparisons of the transcriptional profiles of stromal cells from different tumor sites. In this study, we used customized cDNA microarrays to compare the gene expression profile of stromal cells from primary tumor (CAF, n = 4, lymph node metastasis (N+, n = 3 and bone marrow (BM, n = 4 obtained from breast cancer patients. Biological validation was done in another 16 samples by RT-qPCR. Differences between CAF vs N+, CAF vs BM and N+ vs BM were represented by 20, 235 and 245 genes, respectively (SAM test, FDR < 0.01. Functional analysis revealed that genes related to development and morphogenesis were overrepresented. In a biological validation set, NOTCH2 was confirmed to be more expressed in N+ (vs CAF and ADCY2, HECTD1, HNMT, LOX, MACF1, SLC1A3 and USP16 more expressed in BM (vs CAF. Only small differences were observed in the transcriptional profiles of fibroblasts from the primary tumor and lymph node of breast cancer patients, whereas greater differences were observed between bone marrow stromal cells and the other two sites. These differences may reflect the activities of distinct differentiation programs.

  13. Classification of Spanish white wines using their electrophoretic profiles obtained by capillary zone electrophoresis with amperometric detection.

    Science.gov (United States)

    Arribas, Alberto Sánchez; Martínez-Fernández, Marta; Moreno, Mónica; Bermejo, Esperanza; Zapardiel, Antonio; Chicharro, Manuel

    2014-06-01

    A method was developed for the simultaneous detection of eight polyphenols (t-resveratrol, (+)-catechin, quercetin and p-coumaric, caffeic, sinapic, ferulic, and gallic acids) by CZE with electrochemical detection. Separation of these polyphenols was achieved within 25 min using a 200 mM borate buffer (pH 9.4) containing 10% methanol as separation electrolyte. Amperometric detection of polyphenols was carried out with a glassy carbon electrode (GCE) modified with a multiwalled carbon nanotubes (CNT) layer obtained from a dispersion of CNT in polyethylenimine. The excellent electrochemical properties of this modified electrode allowed the detection and quantification of the selected polyphenols in white wines without any pretreatment step, showing remarkable signal stability despite the presence of potential fouling substances in wine. The electrophoretic profiles of white wines, obtained using this methodology, have proven to be useful for the classification of these wines by means of chemometric multivariate techniques. Principal component analysis and discriminant analysis allowed accurate classification of wine samples on the basis of their grape varietal (verdejo and airén) using the information contained in selected zones of the electropherogram. The utility of the proposed CZE methodology based on the electrochemical response of CNT-modified electrodes appears to be promising in the field of wine industry and it is expected to be successfully extended to classification of a wider range of wines made of other grape varietals. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Transcriptome profiling of sheep granulosa cells and oocytes during early follicular development obtained by Laser Capture Microdissection

    Directory of Open Access Journals (Sweden)

    Bonnet Agnes

    2011-08-01

    Full Text Available Abstract Background Successful achievement of early folliculogenesis is crucial for female reproductive function. The process is finely regulated by cell-cell interactions and by the coordinated expression of genes in both the oocyte and in granulosa cells. Despite many studies, little is known about the cell-specific gene expression driving early folliculogenesis. The very small size of these follicles and the mixture of types of follicles within the developing ovary make the experimental study of isolated follicular components very difficult. The recently developed laser capture microdissection (LCM technique coupled with microarray experiments is a promising way to address the molecular profile of pure cell populations. However, one main challenge was to preserve the RNA quality during the isolation of single cells or groups of cells and also to obtain sufficient amounts of RNA. Using a new LCM method, we describe here the separate expression profiles of oocytes and follicular cells during the first stages of sheep folliculogenesis. Results We developed a new tissue fixation protocol ensuring efficient single cell capture and RNA integrity during the microdissection procedure. Enrichment in specific cell types was controlled by qRT-PCR analysis of known genes: six oocyte-specific genes (SOHLH2, MAEL, MATER, VASA, GDF9, BMP15 and three granulosa cell-specific genes (KL, GATA4, AMH. A global gene expression profile for each follicular compartment during early developmental stages was identified here for the first time, using a bovine Affymetrix chip. Most notably, the granulosa cell dataset is unique to date. The comparison of oocyte vs. follicular cell transcriptomes revealed 1050 transcripts specific to the granulosa cell and 759 specific to the oocyte. Functional analyses allowed the characterization of the three main cellular events involved in early folliculogenesis and confirmed the relevance and potential of LCM-derived RNA. Conclusions

  15. Statistical evaluation of fatty acid profile and cholesterol content in fish (common carp) lipids obtained by different sample preparation procedures.

    Science.gov (United States)

    Spiric, Aurelija; Trbovic, Dejana; Vranic, Danijela; Djinovic, Jasna; Petronijevic, Radivoj; Matekalo-Sverak, Vesna

    2010-07-05

    Studies performed on lipid extraction from animal and fish tissues do not provide information on its influence on fatty acid composition of the extracted lipids as well as on cholesterol content. Data presented in this paper indicate the impact of extraction procedures on fatty acid profile of fish lipids extracted by the modified Soxhlet and ASE (accelerated solvent extraction) procedure. Cholesterol was also determined by direct saponification method, too. Student's paired t-test used for comparison of the total fat content in carp fish population obtained by two extraction methods shows that differences between values of the total fat content determined by ASE and modified Soxhlet method are not statistically significant. Values obtained by three different methods (direct saponification, ASE and modified Soxhlet method), used for determination of cholesterol content in carp, were compared by one-way analysis of variance (ANOVA). The obtained results show that modified Soxhlet method gives results which differ significantly from the results obtained by direct saponification and ASE method. However the results obtained by direct saponification and ASE method do not differ significantly from each other. The highest quantities for cholesterol (37.65 to 65.44 mg/100 g) in the analyzed fish muscle were obtained by applying direct saponification method, as less destructive one, followed by ASE (34.16 to 52.60 mg/100 g) and modified Soxhlet extraction method (10.73 to 30.83 mg/100 g). Modified Soxhlet method for extraction of fish lipids gives higher values for n-6 fatty acids than ASE method (t(paired)=3.22 t(c)=2.36), while there is no statistically significant difference in the n-3 content levels between the methods (t(paired)=1.31). The UNSFA/SFA ratio obtained by using modified Soxhlet method is also higher than the ratio obtained using ASE method (t(paired)=4.88 t(c)=2.36). Results of Principal Component Analysis (PCA) showed that the highest positive impact to

  16. Broadband polarization-independent and low-profile optically transparent metamaterial absorber

    Science.gov (United States)

    Li, Long; Xi, Rui; Liu, Haixia; Lv, Zhiyong

    2018-05-01

    A transparent metamaterial absorber with simultaneously high optical transparency and broadband microwave absorption is presented in this paper. Consisting of a two-layer soda-lime glass substrate and three-layer patch-shaped indium tin oxide (ITO) films, the proposed absorber has advantages of broadband absorption with an absorptivity higher than 85% in the range from 6.1 to 22.1 GHz, good polarization insensitiveness, a high transparency, a low profile, and wide-incident-angle stability. A prototype of the proposed absorber is fabricated and experimentally measured to demonstrate its excellent performance. The measured results agree well with the theoretical design and numerical simulations.

  17. Students’ perception of attributes of independent colleges of business profile in the market of higher education in Poland

    Directory of Open Access Journals (Sweden)

    Dejnaka Agnieszka

    2016-12-01

    Full Text Available The article examines the general attributes which are in use by clients (students in the process of evaluation of non-public colleges of business profile in Poland. The evaluations are presented in comparison with other academic institutions having the same profile, both independent and public ones. In the research part, the method of factor analysis was used with the aim of distinguishing the general values which are in students’ use. The most important conclusion resulting from the work is that students of non-public colleges perceive two basic types of attributes regarding a business school, that is practical and academic assets, yet they are most clearly governed by a more pragmatic than academic system of values and choose colleges which – beyond any doubt – offer the model of vocational teaching supported by practice.

  18. Fat characteristics and fatty acid profile of sea cucumbers (Holothuria Scabra obtained from the coasts of the Bushehr province -Iran

    Directory of Open Access Journals (Sweden)

    Najmeh Jadavi

    2015-11-01

    Full Text Available Background: Sea cucumbers are belonging to echinoderms and one of the important members of the food chain in temperate ecosystems and tropical coral reefs. The medicinal and nutritional uses of these invertebrates are primordial and are important as ecological, biological and economic properties. Holothuria Scabra, as one of the most valuable commercial species of sea cucumber in the world, is the dominant species in many Persian Gulf coasts such as the Bushehr province coasts. Conspicuous characteristics such as the use of inexpensive foods in their culture, the rather rapid, easy and low cost growth and reproduction, the possibility of culture with other fish, reduce the organic substrate in pools, the broad tolerance in water factors changes such as salinity and temperature it has selected them to culture.It seems they are containing the significant amounts of nutrients, especially appreciated fatty acids. Therefore, the aims of the current study are determination of total fat content, quality and quantity evaluations of some physicochemical parameters such as acid value (AV, peroxide value (PV, and refractive index (RI as well as, identify the profile of fatty acids in the fat. Materials & Methods: In this study, after collecting the 36 samples of sea cucumbers from the coasts of the bushehr province, sample preparation, and extraction of fat, their fatty acids profile were analyzed using gas chromatography with flame ionization detector (GC-FID. Results: The peroxide and the acid values were 0.62±0.0435 and 0.7553±0.0034. The optical refractive index of the oil was 1467 at 26°C, and total fat was also 2%. Among 19 identified fatty acids obtained from the GC analysis of Holothuria Scabra oil, fatty acids: heneicosanoic acid, linoleic acid, palimitic acid, stearic acid, linoleic acid, and Meristic acid, with respectively amounts of 40.81%, 27.5%, 15.24%, 4.73%, 4.46% and 2.38% had the highest values, and other fatty acids were negligible

  19. Development of behavioural profile in the Northern common boa (Boa imperator): Repeatable independent traits or personality?

    Science.gov (United States)

    Šimková, Olga; Frýdlová, Petra; Žampachová, Barbora; Frynta, Daniel; Landová, Eva

    2017-01-01

    Recent studies of animal personality have focused on its proximate causation and ecological and evolutionary significance in particular, but the question of its development was largely overlooked. The attributes of personality are defined as between-individual differences in behaviour, which are consistent over time (differential consistency) and contexts (contextual generality) and both can be affected by development. We assessed several candidates for personality variables measured in various tests with different contexts over several life-stages (juveniles, older juveniles, subadults and adults) in the Northern common boa. Variables describing foraging/feeding decision and some of the defensive behaviours expressed as individual average values are highly repeatable and consistent. We found two main personality axes—one associated with foraging/feeding and the speed of decision, the other reflecting agonistic behaviour. Intensity of behaviour in the feeding context changes during development, but the level of agonistic behaviour remains the same. The juveniles and adults have a similar personality structure, but there is a period of structural change of behaviour during the second year of life (subadults). These results require a new theoretical model to explain the selection pressures resulting in this developmental pattern of personality. We also studied the proximate factors and their relationship to behavioural characteristics. Physiological parameters (heart and breath rate stress response) measured in adults clustered with variables concerning the agonistic behavioural profile, while no relationship between the juvenile/adult body size and personality concerning feeding/foraging and the agonistic behavioural profile was found. Our study suggests that it is important for studies of personality development to focus on both the structural and differential consistency, because even though behaviour is differentially consistent, the structure can change. PMID

  20. Development of behavioural profile in the Northern common boa (Boa imperator: Repeatable independent traits or personality?

    Directory of Open Access Journals (Sweden)

    Olga Šimková

    Full Text Available Recent studies of animal personality have focused on its proximate causation and ecological and evolutionary significance in particular, but the question of its development was largely overlooked. The attributes of personality are defined as between-individual differences in behaviour, which are consistent over time (differential consistency and contexts (contextual generality and both can be affected by development. We assessed several candidates for personality variables measured in various tests with different contexts over several life-stages (juveniles, older juveniles, subadults and adults in the Northern common boa. Variables describing foraging/feeding decision and some of the defensive behaviours expressed as individual average values are highly repeatable and consistent. We found two main personality axes-one associated with foraging/feeding and the speed of decision, the other reflecting agonistic behaviour. Intensity of behaviour in the feeding context changes during development, but the level of agonistic behaviour remains the same. The juveniles and adults have a similar personality structure, but there is a period of structural change of behaviour during the second year of life (subadults. These results require a new theoretical model to explain the selection pressures resulting in this developmental pattern of personality. We also studied the proximate factors and their relationship to behavioural characteristics. Physiological parameters (heart and breath rate stress response measured in adults clustered with variables concerning the agonistic behavioural profile, while no relationship between the juvenile/adult body size and personality concerning feeding/foraging and the agonistic behavioural profile was found. Our study suggests that it is important for studies of personality development to focus on both the structural and differential consistency, because even though behaviour is differentially consistent, the structure can

  1. Development of behavioural profile in the Northern common boa (Boa imperator): Repeatable independent traits or personality?

    Science.gov (United States)

    Šimková, Olga; Frýdlová, Petra; Žampachová, Barbora; Frynta, Daniel; Landová, Eva

    2017-01-01

    Recent studies of animal personality have focused on its proximate causation and ecological and evolutionary significance in particular, but the question of its development was largely overlooked. The attributes of personality are defined as between-individual differences in behaviour, which are consistent over time (differential consistency) and contexts (contextual generality) and both can be affected by development. We assessed several candidates for personality variables measured in various tests with different contexts over several life-stages (juveniles, older juveniles, subadults and adults) in the Northern common boa. Variables describing foraging/feeding decision and some of the defensive behaviours expressed as individual average values are highly repeatable and consistent. We found two main personality axes-one associated with foraging/feeding and the speed of decision, the other reflecting agonistic behaviour. Intensity of behaviour in the feeding context changes during development, but the level of agonistic behaviour remains the same. The juveniles and adults have a similar personality structure, but there is a period of structural change of behaviour during the second year of life (subadults). These results require a new theoretical model to explain the selection pressures resulting in this developmental pattern of personality. We also studied the proximate factors and their relationship to behavioural characteristics. Physiological parameters (heart and breath rate stress response) measured in adults clustered with variables concerning the agonistic behavioural profile, while no relationship between the juvenile/adult body size and personality concerning feeding/foraging and the agonistic behavioural profile was found. Our study suggests that it is important for studies of personality development to focus on both the structural and differential consistency, because even though behaviour is differentially consistent, the structure can change.

  2. Expression profiling to predict the clinical behaviour of ovarian cancer fails independent evaluation

    International Nuclear Information System (INIS)

    Gevaert, Olivier; De Smet, Frank; Van Gorp, Toon; Pochet, Nathalie; Engelen, Kristof; Amant, Frederic; De Moor, Bart; Timmerman, Dirk; Vergote, Ignace

    2008-01-01

    In a previously published pilot study we explored the performance of microarrays in predicting clinical behaviour of ovarian tumours. For this purpose we performed microarray analysis on 20 patients and estimated that we could predict advanced stage disease with 100% accuracy and the response to platin-based chemotherapy with 76.92% accuracy using leave-one-out cross validation techniques in combination with Least Squares Support Vector Machines (LS-SVMs). In the current study we evaluate whether tumour characteristics in an independent set of 49 patients can be predicted using the pilot data set with principal component analysis or LS-SVMs. The results of the principal component analysis suggest that the gene expression data from stage I, platin-sensitive advanced stage and platin-resistant advanced stage tumours in the independent data set did not correspond to their respective classes in the pilot study. Additionally, LS-SVM models built using the data from the pilot study – although they only misclassified one of four stage I tumours and correctly classified all 45 advanced stage tumours – were not able to predict resistance to platin-based chemotherapy. Furthermore, models based on the pilot data and on previously published gene sets related to ovarian cancer outcomes, did not perform significantly better than our models. We discuss possible reasons for failure of the model for predicting response to platin-based chemotherapy and conclude that existing results based on gene expression patterns of ovarian tumours need to be thoroughly scrutinized before these results can be accepted to reflect the true performance of microarray technology

  3. Analysis of cytokine profile and growth factors in platelet-rich plasma obtained by open systems and commercial columns.

    Science.gov (United States)

    Pochini, Alberto de Castro; Antonioli, Eliane; Bucci, Daniella Zanetti; Sardinha, Luiz Roberto; Andreoli, Carlos Vicente; Ferretti, Mario; Ejnisman, Benno; Goldberg, Anna Carla; Cohen, Moisés

    2016-01-01

    To evaluate growth factors and cytokines in samples of platelet-rich plasma obtained by three different centrifugation methods. Peripheral blood of six individuals with no hematological diseases, aged 18 to 68 years, was drawn to obtain platelet-rich plasma, using the open method and commercial columns by Medtronic and Biomet. The products obtained with the different types of centrifugation were submitted to laboratory analysis, including pro-inflammatory cytokines and chemokines by flow cytometry assays, the concentration of fibroblast growth factors-2 (FGF-2) and transforming growth factor-beta1 (TGF-β1). The diverse separation methods generated systematically different profiles regarding number of platelets and leukocytes. The Medtronic system yielded a product with the highest concentration of platelets, and the open method, with the lowest concentration of platelets. The results of cytokine analysis showed that the different types of centrifugation yielded products with high concentrations of interleukin 8, interleukin 1β. The open system resulted in a product with high levels of interleukin 6. Other cytokines and chemokines measured were similar between systems. The product obtained with the open method showed higher levels of TGF-β1 in relation to other systems and low FGF-2 levels. The formed elements, growth factors and cytokines in samples of platelet-rich plasma varied according to the centrifugation technique used. Avaliar fatores de crescimento e citocinas em amostras de plasma rico em plaquetas obtidas por três diferentes métodos de centrifugação. Foi coletado sangue periférico de seis indivíduos, sem doença hematológica, com idades entre 18 e 68 anos, para obtenção de plasma rico em plaquetas, utilizando o método aberto e sistemas comerciais das empresas Medtronic e Biomet. Os produtos obtidos com os diferentes tipos de centrifugação foram submetidos às análises laboratoriais, incluindo citocinas próinflamatórias e quimiocinas

  4. Profiling Y561-dependent and -independent substrates of CSF-1R in epithelial cells.

    Directory of Open Access Journals (Sweden)

    Melodie L Knowlton

    2010-10-01

    Full Text Available Receptor tyrosine kinases (RTKs activate multiple downstream cytosolic tyrosine kinases following ligand stimulation. SRC family kinases (SFKs, which are recruited to activated RTKs through SH2 domain interactions with RTK autophosphorylation sites, are targets of many subfamilies of RTKs. To date, there has not been a systematic analysis of the downstream substrates of such receptor-activated SFKs. Here, we conducted quantitative mass spectrometry utilizing stable isotope labeling (SILAC analysis to profile candidate SRC-substrates induced by the CSF-1R tyrosine kinase by comparing the phosphotyrosine-containing peptides from cells expressing either CSF-1R or a mutant form of this RTK that is unable to bind to SFKs. This analysis identified previously uncharacterized changes in tyrosine phosphorylation induced by CSF-1R in mammary epithelial cells as well as a set of candidate substrates dependent on SRC recruitment to CSF-1R. Many of these candidates may be direct SRC targets as the amino acids flanking the phosphorylation sites in these proteins are similar to known SRC kinase phosphorylation motifs. The putative SRC-dependent proteins include known SRC substrates as well as previously unrecognized SRC targets. The collection of substrates includes proteins involved in multiple cellular processes including cell-cell adhesion, endocytosis, and signal transduction. Analyses of phosphoproteomic data from breast and lung cancer patient samples identified a subset of the SRC-dependent phosphorylation sites as being strongly correlated with SRC activation, which represent candidate markers of SRC activation downstream of receptor tyrosine kinases in human tumors. In summary, our data reveal quantitative site-specific changes in tyrosine phosphorylation induced by CSF-1R activation in epithelial cells and identify many candidate SRC-dependent substrates phosphorylated downstream of an RTK.

  5. Projected potential profiles across interfaces obtained by reconstructing the exit face wave function from through focal series

    International Nuclear Information System (INIS)

    Bhattacharyya, Somnath; Koch, Christoph T.; Ruehle, Manfred

    2006-01-01

    An iterative method for reconstructing the exit face wave function from a through focal series of transmission electron microscopy image line profiles across an interface is presented. Apart from high-resolution images recorded with small changes in defocus, this method works also well for a large defocus range as used for Fresnel imaging. Using the phase-object approximation the projected electrostatic as well as the absorptive potential profiles across an interface are determined from this exit face wave function. A new experimental image alignment procedure was developed in order to align images with large relative defocus shift. The performance of this procedure is shown to be superior to other image alignment procedures existing in the literature. The reconstruction method is applied to both simulated and experimental images

  6. Phytochemical screening and analgesic profile of the lyophilized aqueous extract obtained from Chrysobalanus icaco leaves in experimental protocols.

    Science.gov (United States)

    Araújo-Filho, Heitor G; Dias, Jessica Deise Santos; Quintans-Júnior, Lucindo J; Santos, Márcio R V; White, Pollyanna A S; Barreto, Rosana S S; Barreto, André S; Estevam, Charles S; Araujo, Silvan S; Almeida, Jackson R G S; Menezes, Irwin R A; Coutinho, Henrique D M; Quintans, Jullyana S S

    2016-12-01

    Chrysobalanus icaco L. (Chrysobalanaceae) has been used for the treatment of abdominal pain and cramps. Assess the chemical and pharmacological profile of the lyophilized aqueous extract from C. icaco leaves (AEC). Chromatographic methods were used to assess compounds from AEC. Mice were treated with vehicle (control group) or AEC (100, 200 or 400 mg/kg, p.o.) (group with 7-8 mice) and the analgesic profile was assessed employing the acetic acid-induced writhing, formalin, hot plate tests and hyperalgesia induced by carrageenan (CG) or tumour necrosis factor-alpha. The animal motor performance was assessed using rota-rod and grip strength tests. The chromatographic profile of AEC demonstrated the presence of terpenoid compounds. The acute pretreatment with AEC, at all doses, produced a significant (p acetic acid-induced writhing test. In the formalin test, AEC were effective in the second phase (p analgesic and anti-inflammatory properties. So, these results corroborate the experiments using the AEC in inflammatory pain protocols. Our results suggest that AEC act against inflammatory pain.

  7. High resolution vertical profiles of wind, temperature and humidity obtained by computer processing and digital filtering of radiosonde and radar tracking data from the ITCZ experiment of 1977

    Science.gov (United States)

    Danielson, E. F.; Hipskind, R. S.; Gaines, S. E.

    1980-01-01

    Results are presented from computer processing and digital filtering of radiosonde and radar tracking data obtained during the ITCZ experiment when coordinated measurements were taken daily over a 16 day period across the Panama Canal Zone. The temperature relative humidity and wind velocity profiles are discussed.

  8. HPLC Evaluation of Phenolic Profile, Nutritive Content, and Antioxidant Capacity of Extracts Obtained from Punica granatum Fruit Peel

    Science.gov (United States)

    Middha, Sushil Kumar; Usha, Talambedu; Pande, Veena

    2013-01-01

    This study revealed polyphenolic content, nutritive content, antioxidant activity, and phenolic profile of methanol and aqueous extracts of Punica granatum peel extract. For this, extracts were screened for possible antioxidant activities by free radical scavenging activity (DPPH), hydrogen peroxide scavenging activity and ferric-reducing antioxidant power (FRAP) assays. The total phenolics and flavonoid recovered by methanolic (MPE) and the water extract (AQPE) were ranged from 185 ± 12.45 to 298.00 ± 24.86 mg GAE (gallic acid equivalents)/gm and 23.05 ± 1.54 to 49.8 ± 2.14 quercetin (QE) mg/g, respectively. The EC50 of herbal extracts ranged from 100 µg/ml (0.38 quercetin equivalents), for AQPE, 168 µg/ml (0.80 quercetin equivalents), for MPE. The phenolic profile in the methanolic extracts was investigated by chromatographic (HPLC) method. About 5 different flavonoids, phenolic acids, and their derivatives including quercetin (1), rutin (2), gallic acid (3), ellagic acid (4), and punicalagin as a major ellagitannin (5) have been identified. Among both extracts, methanolic extract was the most effective. This report may be the first to show nutritive content and correlation analysis to suggest that phenols and flavonoids might contribute the high antioxidant activity of this fruit peel and establish it as a valuable natural antioxidant source applicable in the health food industry. PMID:23983682

  9. Cerebrospinal fluid metabolic profiles in multiple sclerosis and degenerative dementias obtained by high resolution proton magnetic resonance spectroscopy

    International Nuclear Information System (INIS)

    Vion-Dury, J.; Confort-Gouny, S.; Maillet, S.; Cozzone, P.J.; Nicoli, F.; Gastaut, J.L.

    1996-01-01

    We have analyzed the cerebrospinal fluid (CSF) of 19 patients with multiple sclerosis (MS), 12 patients with degenerative dementia and 17 control patients using in vitro high resolution proton magnetic resonance spectroscopy (MRS) at 400 MHz. The CSF metabolic profile is slightly modified in MS patients (increased lactate and fructose concentrations, decreased creatinine and phenylalanine concentrations) and is not correlated with the intensity of the intrathecal inflammation. Proton MRS of CSF does not differentiate relapsing-remitting MS and primary progressive MS. We have not detected any specific abnormal resonance in native or lyophilized CSF. The CSF metabolic profile of demented patients is much more altered (increased concentration of lactate, pyruvate, alanine, lysine, valine, leucine-isoleucine, tyrosine, glutamine) and is in agreement with a brain oxidative metabolism impairment as already described in Alzheimer's disease. Unassigned abnormal but non specific or constant resonances have been detected on MR spectra of demented patients. CSF inositol concentration is also increased in the CSF of patients with Alzheimer's disease. In vitro high resolution proton MRS of the CSF constitutes a new and original way to explore CSF for the differential and/or early diagnosis of dementias, as a complement to in vivo proton cerebral MRS. (authors). 22 refs., 4 figs., 2 tabs

  10. Cerebrospinal fluid metabolic profiles in multiple sclerosis and degenerative dementias obtained by high resolution proton magnetic resonance spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Vion-Dury, J.; Confort-Gouny, S.; Maillet, S.; Cozzone, P.J. [Centre Hospitalier Universitaire de la Timone, 13 - Marseille (France); Nicoli, F. [Centre Hospitalier Universitaire de la Timone, 13 - Marseille (France)]|[Hopital Sainte-Marguerite, 13 - Marseille (France); Gastaut, J.L. [Hopital Sainte-Marguerite, 13 - Marseille (France)

    1996-07-01

    We have analyzed the cerebrospinal fluid (CSF) of 19 patients with multiple sclerosis (MS), 12 patients with degenerative dementia and 17 control patients using in vitro high resolution proton magnetic resonance spectroscopy (MRS) at 400 MHz. The CSF metabolic profile is slightly modified in MS patients (increased lactate and fructose concentrations, decreased creatinine and phenylalanine concentrations) and is not correlated with the intensity of the intrathecal inflammation. Proton MRS of CSF does not differentiate relapsing-remitting MS and primary progressive MS. We have not detected any specific abnormal resonance in native or lyophilized CSF. The CSF metabolic profile of demented patients is much more altered (increased concentration of lactate, pyruvate, alanine, lysine, valine, leucine-isoleucine, tyrosine, glutamine) and is in agreement with a brain oxidative metabolism impairment as already described in Alzheimer`s disease. Unassigned abnormal but non specific or constant resonances have been detected on MR spectra of demented patients. CSF inositol concentration is also increased in the CSF of patients with Alzheimer`s disease. In vitro high resolution proton MRS of the CSF constitutes a new and original way to explore CSF for the differential and/or early diagnosis of dementias, as a complement to in vivo proton cerebral MRS. (authors). 22 refs., 4 figs., 2 tabs.

  11. Mercury (Hg) in meteorites: Variations in abundance, thermal release profile, mass-dependent and mass-independent isotopic fractionation

    Science.gov (United States)

    Meier, Matthias M. M.; Cloquet, Christophe; Marty, Bernard

    2016-06-01

    We have measured the concentration, isotopic composition and thermal release profiles of Mercury (Hg) in a suite of meteorites, including both chondrites and achondrites. We find large variations in Hg concentration between different meteorites (ca. 10 ppb to 14,000 ppb), with the highest concentration orders of magnitude above the expected bulk solar system silicates value. From the presence of several different Hg carrier phases in thermal release profiles (150-650 °C), we argue that these variations are unlikely to be mainly due to terrestrial contamination. The Hg abundance of meteorites shows no correlation with petrographic type, or mass-dependent fractionation of Hg isotopes. Most carbonaceous chondrites show mass-independent enrichments in the odd-numbered isotopes 199Hg and 201Hg. We show that the enrichments are not nucleosynthetic, as we do not find corresponding nucleosynthetic deficits of 196Hg. Instead, they can partially be explained by Hg evaporation and redeposition during heating of asteroids from primordial radionuclides and late-stage impact heating. Non-carbonaceous chondrites, most achondrites and the Earth do not show these enrichments in vapor-phase Hg. All meteorites studied here have however isotopically light Hg (δ202Hg = ∼-7 to -1) relative to the Earth's average crustal values, which could suggest that the Earth has lost a significant fraction of its primordial Hg. However, the late accretion of carbonaceous chondritic material on the order of ∼2%, which has been suggested to account for the water, carbon, nitrogen and noble gas inventories of the Earth, can also contribute most or all of the Earth's current Hg budget. In this case, the isotopically heavy Hg of the Earth's crust would have to be the result of isotopic fractionation between surface and deep-Earth reservoirs.

  12. Quantitative profiling of polar metabolites in herbal medicine injections for multivariate statistical evaluation based on independence principal component analysis.

    Directory of Open Access Journals (Sweden)

    Miaomiao Jiang

    Full Text Available Botanical primary metabolites extensively exist in herbal medicine injections (HMIs, but often were ignored to control. With the limitation of bias towards hydrophilic substances, the primary metabolites with strong polarity, such as saccharides, amino acids and organic acids, are usually difficult to detect by the routinely applied reversed-phase chromatographic fingerprint technology. In this study, a proton nuclear magnetic resonance (1H NMR profiling method was developed for efficient identification and quantification of small polar molecules, mostly primary metabolites in HMIs. A commonly used medicine, Danhong injection (DHI, was employed as a model. With the developed method, 23 primary metabolites together with 7 polyphenolic acids were simultaneously identified, of which 13 metabolites with fully separated proton signals were quantified and employed for further multivariate quality control assay. The quantitative 1H NMR method was validated with good linearity, precision, repeatability, stability and accuracy. Based on independence principal component analysis (IPCA, the contents of 13 metabolites were characterized and dimensionally reduced into the first two independence principal components (IPCs. IPC1 and IPC2 were then used to calculate the upper control limits (with 99% confidence ellipsoids of χ2 and Hotelling T2 control charts. Through the constructed upper control limits, the proposed method was successfully applied to 36 batches of DHI to examine the out-of control sample with the perturbed levels of succinate, malonate, glucose, fructose, salvianic acid and protocatechuic aldehyde. The integrated strategy has provided a reliable approach to identify and quantify multiple polar metabolites of DHI in one fingerprinting spectrum, and it has also assisted in the establishment of IPCA models for the multivariate statistical evaluation of HMIs.

  13. A comparative study on aromatic profiles of strawberry vinegars obtained using different conditions in the production process.

    Science.gov (United States)

    Ubeda, Cristina; Callejón, Raquel M; Troncoso, Ana M; Moreno-Rojas, Jose M; Peña, Francisco; Morales, M Lourdes

    2016-02-01

    Impact odorants in strawberry vinegars produced in different containers (glass, oak and cherry barrels) were determined by gas chromatography-olfactometry using modified frequency (MF) technique, and dynamic headspace gas chromatography-mass spectrometry. Aromatic profile of vinegar from strawberry cooked must was also studied. All strawberry vinegars retained certain impact odorants from strawberries: 3-nonen-2-one, (E,E)-2,4-decadienal, guaiacol, nerolidol, pantolactone+furaneol, eugenol, γ-dodecalactone and phenylacetic acid. Isovaleric acid, pantolactone+furaneol, p-vinylguaiacol, phenylacetic acid and vanillin were the most important aroma-active compounds in all vinegars. The strawberry cooked must vinegar accounted for the highest number of impact odorants. Wood barrels provided more aroma complexity than glass containers. Impact odorants with grassy characteristics were predominant in vinegar from glass containers, and those with sweet and fruity characteristics in vinegars from wood barrels. Principal component analysis indicated that the production process led to differences in the impact odorants. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Mass Spectrometry-Based Proteomic Profiling of Thrombotic Material Obtained by Endovascular Thrombectomy in Patients with Ischemic Stroke

    Directory of Open Access Journals (Sweden)

    Roberto Muñoz

    2018-02-01

    Full Text Available Thrombotic material retrieved from acute ischemic stroke (AIS patients represents a valuable source of biological information. In this study, we have developed a clinical proteomics workflow to characterize the protein cargo of thrombi derived from AIS patients. To analyze the thrombus proteome in a large-scale format, we developed a workflow that combines the isolation of thrombus by endovascular thrombectomy and peptide chromatographic fractionation coupled to mass-spectrometry. Using this workflow, we have characterized a specific proteomic expression profile derived from four AIS patients included in this study. Around 1600 protein species were unambiguously identified in the analyzed material. Functional bioinformatics analyses were performed, emphasizing a clustering of proteins with immunological functions as well as cardiopathy-related proteins with blood-cell dependent functions and peripheral vascular processes. In addition, we established a reference proteomic fingerprint of 341 proteins commonly detected in all patients. Protein interactome network of this subproteome revealed protein clusters involved in the interaction of fibronectin with 14-3-3 proteins, TGFβ signaling, and TCP complex network. Taken together, our data contributes to the repertoire of the human thrombus proteome, serving as a reference library to increase our knowledge about the molecular basis of thrombus derived from AIS patients, paving the way toward the establishment of a quantitative approach necessary to detect and characterize potential novel biomarkers in the stroke field.

  15. Vertical microphysical profiles of convective clouds as a tool for obtaining aerosol cloud-mediated climate forcings

    Energy Technology Data Exchange (ETDEWEB)

    Rosenfeld, Daniel [Hebrew Univ. of Jerusalem (Israel)

    2015-12-23

    Quantifying the aerosol/cloud-mediated radiative effect at a global scale requires simultaneous satellite retrievals of cloud condensation nuclei (CCN) concentrations and cloud base updraft velocities (Wb). Hitherto, the inability to do so has been a major cause of high uncertainty regarding anthropogenic aerosol/cloud-mediated radiative forcing. This can be addressed by the emerging capability of estimating CCN and Wb of boundary layer convective clouds from an operational polar orbiting weather satellite. Our methodology uses such clouds as an effective analog for CCN chambers. The cloud base supersaturation (S) is determined by Wb and the satellite-retrieved cloud base drop concentrations (Ndb), which is the same as CCN(S). Developing and validating this methodology was possible thanks to the ASR/ARM measurements of CCN and vertical updraft profiles. Validation against ground-based CCN instruments at the ARM sites in Oklahoma, Manaus, and onboard a ship in the northeast Pacific showed a retrieval accuracy of ±25% to ±30% for individual satellite overpasses. The methodology is presently limited to boundary layer not raining convective clouds of at least 1 km depth that are not obscured by upper layer clouds, including semitransparent cirrus. The limitation for small solar backscattering angles of <25º restricts the satellite coverage to ~25% of the world area in a single day. This methodology will likely allow overcoming the challenge of quantifying the aerosol indirect effect and facilitate a substantial reduction of the uncertainty in anthropogenic climate forcing.

  16. Metabolite profiling of Clinacanthus nutans leaves extracts obtained from different drying methods by 1H NMR-based metabolomics

    Science.gov (United States)

    Hashim, Noor Haslinda Noor; Latip, Jalifah; Khatib, Alfi

    2016-11-01

    The metabolites of Clinacanthus nutans leaves extracts and their dependence on drying process were systematically characterized using 1H nuclear magnetic resonance spectroscopy (NMR) multivariate data analysis. Principal component analysis (PCA) and partial least square-discriminant analysis (PLS-DA) were able to distinguish the leaves extracts obtained from different drying methods. The identified metabolites were carbohydrates, amino acid, flavonoids and sulfur glucoside compounds. The major metabolites responsible for the separation in PLS-DA loading plots were lupeol, cycloclinacosides, betulin, cerebrosides and choline. The results showed that the combination of 1H NMR spectroscopy and multivariate data analyses could act as an efficient technique to understand the C. nutans composition and its variation.

  17. Analysis of synthetic profile of CZTS as photovoltaic material obtained with variations of titanium and TiN

    Science.gov (United States)

    Muñoz, M.; Vera, E.; Gómez, J.; Pineda, Y.

    2017-12-01

    Semiconductor type Cu2ZnTiS4 (CZTiS) and Cu2ZnSnS4 (CZTS),were synthetized starting from a hydrothermal route from precursor powders such as copper, zinc, tin, titanium isopropoxide and tiocarbammide metal nitrates dissolved in deionized water in concentrations of 1molL-1. Dosed and placed in a steel autoclave equipped with a Teflon jacket under magnetic stirring (150rpm) and at a temperature of 300°C for 24 hours in order to promote the formation of the respective ceramic phases. Segregates have been repeatedly washed with ethanol at all times until obtaining crystalline-looking solids. Subsequently, in order to promote the production of pure crystalline phases, the materials were subjected to a second reaction stage in a tubular furnace at 400°C in flow (50mLmin-1) for the purpose of Reduce the concentration of secondary phases of sulphides. The characterization of the CZTiS and CZTS materials was performed by X-ray Diffraction (XRD) and Raman spectroscopy where the presence of Kesterite type crystalline structures was confirmed in the two materials revealing that the effect of titanium with a higher ionic radius than tin produces a distortion in the cell of the CZTiS material compared to the report for the CZTS system. The results of Scanning Electron Microscopy (SEM), confirm the regular aggregates obtained with composition consistent with the proposal theoretically and validated by Energy-Dispersion X-ray Spectroscopy (EDX) techniques and comparison between secondary emission spectra and Retro-dispersed.

  18. Serum levels of FGF-21 are increased in coronary heart disease patients and are independently associated with adverse lipid profile.

    Directory of Open Access Journals (Sweden)

    Zhuofeng Lin

    Full Text Available BACKGROUND: Fibroblast growth factor 21 (FGF-21 is a metabolic regulator with multiple beneficial effects on glucose homeostasis and lipid metabolism in animal models. The relationship between plasma levels of FGF-21 and coronary heart disease (CHD in unknown. METHODOLOGY/PRINCIPAL FINDINGS: This study aimed to investigate the correlation of serum FGF-21 levels and lipid metabolism in the patients with coronary heart disease. We performed a logistic regression analysis of the relation between serum levels of FGF-21 and CHD patients with and without diabetes and hypertension. This study was conducted in the Departments of Endocrinology and Cardiovascular Diseases at two University Hospitals. Participants consisted of one hundred and thirty-five patients who have been diagnosed to have CHD and sixty-one control subjects. Serum FGF-21 level and levels of fasting blood glucose; triglyceride; apolipoprotein B100; HOMA-IR; insulin; total cholesterol; HDL-cholesterol; LDL-cholesterol; and C-reactive protein were measured. We found that median serum FGF-21 levels were significantly higher in CHD than that of control subjects (P<0.0001. Serum FGF-21 levels in CHD patients with diabetes, hypertension, or both were higher than that of patients without these comorbidities. Serum FGF-21 levels correlated positively with triglycerides, fasting blood glucose, apolipoprotein B100, insulin and HOMA-IR but negatively with HDL-C and apolipoprotein A1 after adjusting for BMI, diabetes and hypertension. Logistic regression analysis demonstrated that FGF-21 showed an independent association with triglyceride and apolipoprotein A1. CONCLUSIONS/SIGNIFICANCE: High levels of FGF-21 are associated with adverse lipid profiles in CHD patients. The paradoxical increase of serum FGF-21 in CHD patients may indicate a compensatory response or resistance to FGF-21.

  19. Evaluation of volatile profiles obtained for minimally-processed pineapple fruit samples during storage by headspace-solid phase microextraction gas chromatography-mass spectrometry

    Directory of Open Access Journals (Sweden)

    Francielle Crocetta TURAZZI

    Full Text Available Abstract This paper describes the application of the solid-phase microextraction (SPME technique for the determination and monitoring of the volatile profile of minimally-processed pineapple fruit stored at various temperatures (-12 °C, 4 °C and 25 °C for different periods (1, 4 and 10 days. The SPME fiber coating composed of Car/PDMS presented the best performance. The optimal extraction conditions obtained through a Doehlert design were 60 min at 35 °C. The profiles for the volatile compounds content of the fruit at each stage of storage were determined by gas chromatography-mass spectrometry (GC-MS. The variation in the volatile profile over time was greater when the fruit samples were stored at 25 °C and at -12 °C compared to 4 °C. Thus, according to the volatile profiles associated with the storage conditions evaluated in this study, packaged pineapple retains best its fresh fruit aroma when stored at 4 °C.

  20. HPV and high-risk gene expression profiles predict response to chemoradiotherapy in head and neck cancer, independent of clinical factors

    International Nuclear Information System (INIS)

    Jong, Monique C. de; Pramana, Jimmy; Knegjens, Joost L.; Balm, Alfons J.M.; Brekel, Michiel W.M. van den; Hauptmann, Michael; Begg, Adrian C.; Rasch, Coen R.N.

    2010-01-01

    Purpose: The purpose of this study was to combine gene expression profiles and clinical factors to provide a better prediction model of local control after chemoradiotherapy for advanced head and neck cancer. Material and methods: Gene expression data were available for a series of 92 advanced stage head and neck cancer patients treated with primary chemoradiotherapy. The effect of the Chung high-risk and Slebos HPV expression profiles on local control was analyzed in a model with age at diagnosis, gender, tumor site, tumor volume, T-stage and N-stage and HPV profile status. Results: Among 75 patients included in the study, the only factors significantly predicting local control were tumor site (oral cavity vs. Pharynx, hazard ratio 4.2 [95% CI 1.4-12.5]), Chung gene expression status (high vs. Low risk profile, hazard ratio 4.4 [95% CI 1.5-13.3]) and HPV profile (negative vs. Positive profile, hazard ratio 6.2 [95% CI 1.7-22.5]). Conclusions: Chung high-risk expression profile and a negative HPV expression profile were significantly associated with increased risk of local recurrence after chemoradiotherapy in advanced pharynx and oral cavity tumors, independent of clinical factors.

  1. Serum peptide/protein profiling by mass spectrometry provides diagnostic information independently of CA125 in women with an ovarian tumor

    DEFF Research Database (Denmark)

    Callesen, Anne; Madsen, Jonna S; Iachina, Maria

    2010-01-01

    In the present study, the use of a robust and sensitive mass spectrometry based protein profiling analysis was tested as diagnostic tools for women with an ovarian tumor. The potential additional diagnostic value of serum protein profiles independent of the information provided by CA125 were also...... investigated. Protein profiles of 113 serum samples from women with an ovarian tumor (54 malign and 59 benign) were generated using MALDI-TOF MS. A total of 98 peaks with a significant difference (pwomen with benign tumors/cysts and malignant ovarian tumors were identified. After...... average linkage clustering, a profile of 46 statistical significant mass peaks was identified to distinguish malignant tumors and benign tumors/cysts. In the subgroup of women with normal CA125 values (

  2. Profiling polyphenol composition by HPLC-DAD-ESI/MSn and the antibacterial activity of infusion preparations obtained from four medicinal plants.

    Science.gov (United States)

    Ziani, Borhane E C; Barros, Lillian; Boumehira, Ali Z; Bachari, Khaldoun; Heleno, Sandrina A; Alves, Maria Jose; Ferreira, Isabel C F R

    2018-01-24

    The infusions of Thymus pallescens Noë, Saccocalyx satureioides Coss. et Dur., Ptychotis verticillata Briq. and Limoniastrum guyonianum Boiss. have been used as medicinal remedies for many diseases in Algerian folk medicine. These species have also been well documented as rich sources of phytochemicals, such as phenolic compounds with wide diversified chemical structures, which exhibit far-ranging biological activities. Thus, the phenolic compound profile of the aqueous extracts, obtained by infusing, of the mentioned species was obtained by HPLC-DAD-ESI/MS, and their antibacterial activity was evaluated against clinical isolates. Several phenolic acids were identified and quantified, particularly caffeic acid derivatives along with glycosylated flavonoids. T. pallescens and S. satureioides contain 13 phenolic compounds, where rosmarinic acid was the most abundant phenolic acid present, while L. guyonianum presented myricetin-3-O-glucoside and myricetin-O-rhamnoside as the main compounds among the eight detected molecules. P. verticillata presented a profile of ten phenolic compounds, where 5-O-caffeoylquinic acid was the most abundant phenolic acid, followed by the flavone luteolin-3-O-glucoside. The antibacterial activity of the infusions ranged between 2.5 and 20 mg mL -1 (MIC values), and L. guyonianum showed the highest activity against all of the tested bacteria, Staphylococcus aureus and Pseudomonas aeruginosa being the most sensitive and resistant strains, respectively. Thus, the studied plant species are sources of natural antibacterial substances that can be used to fight against pathogenic microorganisms.

  3. Discrepancies between conformational distributions of a polyalanine peptide in solution obtained from molecular dynamics force fields and amide I' band profiles.

    Science.gov (United States)

    Verbaro, Daniel; Ghosh, Indrajit; Nau, Werner M; Schweitzer-Stenner, Reinhard

    2010-12-30

    Structural preferences in the unfolded state of peptides determined by molecular dynamics still contradict experimental data. A remedy in this regard has been suggested by MD simulations with an optimized Amber force field ff03* ( Best, R. Hummer, G. J. Phys. Chem. B 2009 , 113 , 9004 - 9015 ). The simulations yielded a statistical coil distribution for alanine which is at variance with recent experimental results. To check the validity of this distribution, we investigated the peptide H-A(5)W-OH, which with the exception of the additional terminal tryptophan is analogous to the peptide used to optimize the force fields ff03*. Electronic circular dichroism, vibrational circular dichroism, and infrared spectroscopy as well as J-coupling constants obtained from NMR experiments were used to derive the peptide's conformational ensemble. Additionally, Förster resonance energy transfer between the terminal chromophores of the fluorescently labeled peptide analogue H-Dbo-A(5)W-OH was used to determine its average length, from which the end-to-end distance of the unlabeled peptide was estimated. Qualitatively, the experimental (3)J(H(N),C(α)), VCD, and ECD indicated a preference of alanine for polyproline II-like conformations. The experimental (3)J(H(N),C(α)) for A(5)W closely resembles the constants obtained for A(5). In order to quantitatively relate the conformational distribution of A(5) obtained with the optimized AMBER ff03* force field to experimental data, the former was used to derive a distribution function which expressed the conformational ensemble as a mixture of polyproline II, β-strand, helical, and turn conformations. This model was found to satisfactorily reproduce all experimental J-coupling constants. We employed the model to calculate the amide I' profiles of the IR and vibrational circular dichroism spectrum of A(5)W, as well as the distance between the two terminal peptide carbonyls. This led to an underestimated negative VCD couplet and an

  4. The impact of high pressure processing on the phenolic profile, hydrophilic antioxidant and reducing capacity of purée obtained from commercial tomato varieties.

    Science.gov (United States)

    Jeż, Maja; Wiczkowski, Wiesław; Zielińska, Danuta; Białobrzewski, Ireneusz; Błaszczak, Wioletta

    2018-09-30

    The effect of high hydrostatic pressure (HHP) (450-550-650 MPa/5-10-15 min) on polyphenols profile of purée obtained from commercial tomato varieties (Maliniak, Cerise, Black Prince and Lima) was investigated. Individual polyphenols, total phenolic index (TPI) were quantified using a mass spectrometer (HPLC-MS/MS). Photochemiluminescence (PCLACW), cyclic voltammetry (CV) and ferric reducing antioxidant power (FRAP) assays were used to determine the antioxidant capacity of the hydrophilic extract. The results demonstrated that at certain processing conditions, HHP may enhance or decrease the nutritional quality of tomato purée. However, the tomato variety was a key factor influencing the polyphenols profile and the antioxidant capacity. A significant positive correlation was found among TPI, FRAP or CV parameters and the concentration of caffeic, ferulic, sinapic and p-coumaric acids, and epicatechin. On the other hand, significant positive correlation was observed among antioxidant capacity (PCLACW), TPC, rutin and naringenin concentration as well as chlorogenic and isochlorogenic acids. Copyright © 2018 Elsevier Ltd. All rights reserved.

  5. GH replacement in hypopituitarism improves lipid profile and quality of life independently of changes in obesity variables

    DEFF Research Database (Denmark)

    Abrams, P.; Boquete, H.; Fideleff, H.

    2008-01-01

    OBJECTIVE: GH deficiency (GHD) in adults is characterized by elevated body mass index (BMI), increased waist girth (WG) and increased fat mass (FM). Information about how these indicators of obesity affect the lipid profile and quality of life (QoL) of GHD subjects is scarce. It is also unclear h...

  6. Profiles

    International Nuclear Information System (INIS)

    2004-01-01

    Profiles is a synthetic overview of more than 100 national energy markets in the world, providing insightful facts and key energy statistics. A Profile is structured around 6 main items and completed by key statistics: Ministries, public agencies, energy policy are concerned; main companies in the oil, gas, electricity and coal sectors, status, shareholders; reserve, production, imports and exports, electricity and refining capacities; deregulation of prices, subsidies, taxes; consumption trends by sector, energy market shares; main energy projects, production and consumption prospects. Statistical Profiles are present in about 3 pages the main data and indicators on oil, gas, coal and electricity. (A.L.B.)

  7. Profiles of chloride and water stable isotope in porewater obtained from a 2000 m-deep borehole through the Mesozoic sedimentary series in the East of France

    International Nuclear Information System (INIS)

    Bensenouci, F.; Michelot, J.L.; Matray, J.M.; Savoye, S.

    2010-01-01

    Document available in extended abstract form only. A method to obtain information about fluid flow and solute transport in porous media with low hydraulic conductivity and low water content is based on the study of the natural tracer distribution in pore water. This approach was previously applied to the Callovo-Oxfordian argillites, studied by Andra at the Bure URL (East of France), using several natural tracer profiles ( 4 He, 2 H, 18 O, Cl - , 37 Cl). These profiles were interpreted as the result of a diffusive exchange between pore water in the aquitard and groundwater in the surrounding aquifers. However, at the Bure URL, and in contrast to other investigated argillaceous formations, the concentrations of tracers in lower aquifer groundwater may be higher than those in argillite pore water and increase with depth. The continuity of the profiles and the origin of pore water salinity remained questionable. This study aims at presenting and interpreting chloride and stable isotope profiles in pore water through more than 800 m of sediments, from the lower Oxfordian to the lower Hettangian. Drill-core samples were collected from the 2000 m-deep borehole (EST 433) drilled by Andra in the so-called 'Transposition Zone', located north to the Bure URL. In the framework of the TAPPS 2000 programme, twenty-five core samples were collected from the Oxfordian to the lower Hettangian during the drilling campaign, and in-situ conditioned. The chloride concentrations in pore water were firstly estimated by aqueous leaching, using a geochemical porosity two times smaller than the porosity measured by heating at 150 deg. C. After this estimation of pore water salinities, the radial diffusion and vapour exchange methods were applied to determine the stable isotope and anion concentrations in pore water. The deuterium contents of pore water derived from the vapour exchange experiments describe a classical bell-shape profile in the Callovo-Oxfordian argillites with an

  8. Local skin friction coefficients and boundary layer profiles obtained in flight from the XB-70-1 airplane at Mach numbers up to 2.5

    Science.gov (United States)

    Fisher, D. F.; Saltzman, E. J.

    1973-01-01

    Boundary-layer and local friction data for Mach numbers up to 2.5 and Reynolds numbers up to 3.6 x 10 to the 8th power were obtained in flight at three locations on the XB-70-1 airplane: the lower forward fuselage centerline (nose), the upper rear fuselage centerline, and the upper surface of the right wing. Local skin friction coefficients were derived at each location by using (1) a skin friction force balance, (2) a Preston probe, and (3) an adaptation of Clauser's method which derives skin friction from the rake velocity profile. These three techniques provided consistent results that agreed well with the von Karman-Schoenherr relationship for flow conditions that are quasi-two-dimensional. At the lower angles of attack, the nose-boom and flow-direction vanes are believed to have caused the momentum thickness at the nose to be larger than at the higher angles of attack. The boundary-layer data and local skin friction coefficients are tabulated. The wind-tunnel-model surface-pressure distribution ahead of the three locations and the flight surface-pressure distribution ahead of the wing location are included.

  9. High throughput analysis reveals dissociable gene expression profiles in two independent neural systems involved in the regulation of social behavior

    Directory of Open Access Journals (Sweden)

    Stevenson Tyler J

    2012-10-01

    Full Text Available Abstract Background Production of contextually appropriate social behaviors involves integrated activity across many brain regions. Many songbird species produce complex vocalizations called ‘songs’ that serve to attract potential mates, defend territories, and/or maintain flock cohesion. There are a series of discrete interconnect brain regions that are essential for the successful production of song. The probability and intensity of singing behavior is influenced by the reproductive state. The objectives of this study were to examine the broad changes in gene expression in brain regions that control song production with a brain region that governs the reproductive state. Results We show using microarray cDNA analysis that two discrete brain systems that are both involved in governing singing behavior show markedly different gene expression profiles. We found that cortical and basal ganglia-like brain regions that control the socio-motor production of song in birds exhibit a categorical switch in gene expression that was dependent on their reproductive state. This pattern is in stark contrast to the pattern of expression observed in a hypothalamic brain region that governs the neuroendocrine control of reproduction. Subsequent gene ontology analysis revealed marked variation in the functional categories of active genes dependent on reproductive state and anatomical localization. HVC, one cortical-like structure, displayed significant gene expression changes associated with microtubule and neurofilament cytoskeleton organization, MAP kinase activity, and steroid hormone receptor complex activity. The transitions observed in the preoptic area, a nucleus that governs the motivation to engage in singing, exhibited variation in functional categories that included thyroid hormone receptor activity, epigenetic and angiogenetic processes. Conclusions These findings highlight the importance of considering the temporal patterns of gene expression

  10. Vigorous exercise is associated with superior metabolic profiles in polycystic ovary syndrome independent of total exercise expenditure.

    Science.gov (United States)

    Greenwood, Eleni A; Noel, Martha W; Kao, Chia-Ning; Shinkai, Kanade; Pasch, Lauri A; Cedars, Marcelle I; Huddleston, Heather G

    2016-02-01

    To characterize metabolic features of women with polycystic ovary syndrome (PCOS) by exercise behavior and determine relative health benefits of different exercise intensities. Cross-sectional study. Tertiary academic institution. Three hundred and twenty-six women aged 14-52 years-old with PCOS by Rotterdam criteria examined between 2006 and 2013. International Physical Activity Questionnaire (IPAQ) administered to classify patients into three groups based on Department of Health and Human Services (DHHS) Guidelines of vigorous, moderate, and inactive, along with physical examination and serum testing. Blood pressure, body mass index (BMI), waist circumference, fasting lipids, fasting glucose and insulin, 2-hour 75-gram oral glucose tolerance, homeostatic model assessment of insulin resistance (HOMA-IR). The DHHS guidelines for adequate physical activity were met by 182 (56%) women. Compared with moderate exercisers and inactive women, the vigorous exercisers had lower BMI and lower HOMA-IR; higher levels of high-density lipoprotein cholesterol and sex hormone-binding globulin; and a reduced prevalence of the metabolic syndrome. In a multivariate logistic regression analysis controlling for age, BMI, and total energy expenditure, every hour of vigorous exercise reduced a patient's odds of metabolic syndrome by 22% (odds ratio 0.78; 95% confidence interval, 0.62, 0.99). Women with PCOS who met DHHS guidelines for exercise demonstrated superior metabolic health parameters. Vigorous but not moderate activity is associated with reduced odds of the metabolic syndrome, independent of age, BMI, and total energy expenditure. PCOS patients should be encouraged to meet activity guidelines via vigorous physical activity. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  11. CD4+ T-cell clones obtained from cattle chronically infected with Fasciola hepatica and specific for adult worm antigen express both unrestricted and Th2 cytokine profiles.

    Science.gov (United States)

    Brown, W C; Davis, W C; Dobbelaere, D A; Rice-Ficht, A C

    1994-01-01

    The well-established importance of helper T (Th)-cell subsets in immunity and immunoregulation of many experimental helminth infections prompted a detailed study of the cellular immune response against Fasciola hepatica in the natural bovine host. T-cell lines established from two cattle infected with F. hepatica were characterized for the expression of T-cell surface markers and proliferative responses against F. hepatica adult worm antigen. Parasite-specific T-cell lines contained a mixture of CD4+, CD8+, and gamma/delta T-cell-receptor-bearing T cells. However, cell lines containing either fewer than 10% CD8+ T cells or depleted of gamma/delta T cells proliferated vigorously against F. hepatica antigen, indicating that these T-cell subsets are not required for proliferative responses in vitro. Seventeen F. hepatica-specific CD4+ Th-cell clones were examined for cytokine expression following concanavalin A stimulation. Biological assays to measure interleukin-2 (IL-2) or IL-4, gamma interferon (IFN-gamma), and tumor necrosis factor and Northern (RNA) blot analysis to verify the expression of IL-2, IL-4, and IFN-gamma revealed that the Th-cell clones expressed a spectrum of cytokine profiles. Several Th-cell clones were identified as Th2 cells by the strong expression of IL-4 but little or no IL-2 or IFN-gamma mRNA. The majority of Th-cell clones were classified as Th0 cells by the expression of either all three cytokines or combinations of IL-2 and IL-4 or IL-4 and IFN-gamma. No Th1-cell clones were obtained. All of the Th-cell clones expressed a typical memory cell surface phenotype, characterized as CD45Rlow, and all expressed the lymph node homing receptor (L selectin). These results are the first to describe cytokine responses of F. hepatica-specific T cells obtained from infected cattle and extend our previous analysis of Th0 and Th1 cells from cattle immune to Babesia bovis (W. C. Brown, V. M. Woods, D. A. E. Dobbelaere, and K. S. Logan, Infect. Immun. 61

  12. In-vivo expression profiling of Pseudomonas aeruginosa infections reveals niche-specific and strain-independent transcriptional programs.

    Directory of Open Access Journals (Sweden)

    Piotr Bielecki

    Full Text Available Pseudomonas aeruginosa is a threatening, opportunistic pathogen causing disease in immunocompromised individuals. The hallmark of P. aeruginosa virulence is its multi-factorial and combinatorial nature. It renders such bacteria infectious for many organisms and it is often resistant to antibiotics. To gain insights into the physiology of P. aeruginosa during infection, we assessed the transcriptional programs of three different P. aeruginosa strains directly after isolation from burn wounds of humans. We compared the programs to those of the same strains using two infection models: a plant model, which consisted of the infection of the midrib of lettuce leaves, and a murine tumor model, which was obtained by infection of mice with an induced tumor in the abdomen. All control conditions of P. aeruginosa cells growing in suspension and as a biofilm were added to the analysis. We found that these different P. aeruginosa strains express a pool of distinct genetic traits that are activated under particular infection conditions regardless of their genetic variability. The knowledge herein generated will advance our understanding of P. aeruginosa virulence and provide valuable cues for the definition of prospective targets to develop novel intervention strategies.

  13. Independent preferences

    DEFF Research Database (Denmark)

    Vind, Karl

    1991-01-01

    A simple mathematical result characterizing a subset of a product set is proved and used to obtain additive representations of preferences. The additivity consequences of independence assumptions are obtained for preferences which are not total or transitive. This means that most of the economic ...... theory based on additive preferences - expected utility, discounted utility - has been generalized to preferences which are not total or transitive. Other economic applications of the theorem are given...

  14. On the energy distribution profile of interface states obtained by taking into account of series resistance in Al/TiO2/p-Si (MIS) structures

    International Nuclear Information System (INIS)

    Pakma, O.; Serin, N.; Serin, T.; Altindal, S.

    2011-01-01

    The energy distribution profile of the interface states (N ss ) of Al/TiO 2 /p-Si (MIS) structures prepared using the sol-gel method was obtained from the forward bias current-voltage (I-V) characteristics by taking into account both the bias dependence of the effective barrier height (φ e ) and series resistance (R s ) at room temperature. The main electrical parameters of the MIS structure such as ideality factor (n), zero-bias barrier height (φ b0 ) and average series resistance values were found to be 1.69, 0.519 eV and 659 Ω, respectively. This high value of n was attributed to the presence of an interfacial insulator layer at the Al/p-Si interface and the density of interface states (N ss ) localized at the Si/TiO 2 interface. The values of N ss localized at the Si/TiO 2 interface were found with and without the R s at 0.25-E v in the range between 8.4x10 13 and 4.9x10 13 eV -1 cm -2 . In addition, the frequency dependence of capacitance-voltage (C-V) and conductance-voltage (G/ω-V) characteristics of the structures have been investigated by taking into account the effect of N ss and R s at room temperature. It can be found out that the measured C and G/ω are strongly dependent on bias voltage and frequency. -- Research highlights: →We successfully fabricated Al/TiO 2 /p-Si device with interlayer by a sol-gel method. The facts: (i) that the technology of the fabrication of a Al/TiO 2 /p-Si MIS structure much simpler and economical than that for the Si p-n junction and (b) the main advantages of TiO 2 films are low densities of the surface states when compared to SiO 2 .

  15. On the energy distribution profile of interface states obtained by taking into account of series resistance in Al/TiO{sub 2}/p-Si (MIS) structures

    Energy Technology Data Exchange (ETDEWEB)

    Pakma, O., E-mail: osman@pakma.co [Department of Physics, Faculty of Sciences and Arts, Batman University, Batman (Turkey); Serin, N.; Serin, T. [Department of Engineering Physics, Faculty of Engineering, Ankara University, 06100 Tandogan, Ankara (Turkey); Altindal, S. [Physics Department, Faculty of Arts and Sciences, Gazi University, Teknikokullar, 06500 Ankara (Turkey)

    2011-02-15

    The energy distribution profile of the interface states (N{sub ss}) of Al/TiO{sub 2}/p-Si (MIS) structures prepared using the sol-gel method was obtained from the forward bias current-voltage (I-V) characteristics by taking into account both the bias dependence of the effective barrier height ({phi}{sub e}) and series resistance (R{sub s}) at room temperature. The main electrical parameters of the MIS structure such as ideality factor (n), zero-bias barrier height ({phi}{sub b0}) and average series resistance values were found to be 1.69, 0.519 eV and 659 {Omega}, respectively. This high value of n was attributed to the presence of an interfacial insulator layer at the Al/p-Si interface and the density of interface states (N{sub ss}) localized at the Si/TiO{sub 2} interface. The values of N{sub ss} localized at the Si/TiO{sub 2} interface were found with and without the R{sub s} at 0.25-E{sub v} in the range between 8.4x10{sup 13} and 4.9x10{sup 13} eV{sup -1} cm{sup -2}. In addition, the frequency dependence of capacitance-voltage (C-V) and conductance-voltage (G/{omega}-V) characteristics of the structures have been investigated by taking into account the effect of N{sub ss} and R{sub s} at room temperature. It can be found out that the measured C and G/{omega} are strongly dependent on bias voltage and frequency. -- Research highlights: {yields}We successfully fabricated Al/TiO{sub 2}/p-Si device with interlayer by a sol-gel method. The facts: (i) that the technology of the fabrication of a Al/TiO{sub 2}/p-Si MIS structure much simpler and economical than that for the Si p-n junction and (b) the main advantages of TiO{sub 2} films are low densities of the surface states when compared to SiO{sub 2}.

  16. High throughput and accurate serum proteome profiling by integrated sample preparation technology and single-run data independent mass spectrometry analysis.

    Science.gov (United States)

    Lin, Lin; Zheng, Jiaxin; Yu, Quan; Chen, Wendong; Xing, Jinchun; Chen, Chenxi; Tian, Ruijun

    2018-03-01

    Mass spectrometry (MS)-based serum proteome analysis is extremely challenging due to its high complexity and dynamic range of protein abundances. Developing high throughput and accurate serum proteomic profiling approach capable of analyzing large cohorts is urgently needed for biomarker discovery. Herein, we report a streamlined workflow for fast and accurate proteomic profiling from 1μL of blood serum. The workflow combined an integrated technique for highly sensitive and reproducible sample preparation and a new data-independent acquisition (DIA)-based MS method. Comparing with standard data dependent acquisition (DDA) approach, the optimized DIA method doubled the number of detected peptides and proteins with better reproducibility. Without protein immunodepletion and prefractionation, the single-run DIA analysis enables quantitative profiling of over 300 proteins with 50min gradient time. The quantified proteins span more than five orders of magnitude of abundance range and contain over 50 FDA-approved disease markers. The workflow allowed us to analyze 20 serum samples per day, with about 358 protein groups per sample being identified. A proof-of-concept study on renal cell carcinoma (RCC) serum samples confirmed the feasibility of the workflow for large scale serum proteomic profiling and disease-related biomarker discovery. Blood serum or plasma is the predominant specimen for clinical proteomic studies while the analysis is extremely challenging for its high complexity. Many efforts had been made in the past for serum proteomics for maximizing protein identifications, whereas few have been concerned with throughput and reproducibility. Here, we establish a rapid, robust and high reproducible DIA-based workflow for streamlined serum proteomic profiling from 1μL serum. The workflow doesn't need protein depletion and pre-fractionation, while still being able to detect disease-relevant proteins accurately. The workflow is promising in clinical application

  17. Observation of dopant-profile independent electron transport in sub-monolayer TiO{sub x} stacked ZnO thin films grown by atomic layer deposition

    Energy Technology Data Exchange (ETDEWEB)

    Saha, D., E-mail: sahaphys@gmail.com, E-mail: pmisra@rrcat.gov.in; Misra, P., E-mail: sahaphys@gmail.com, E-mail: pmisra@rrcat.gov.in; Joshi, M. P.; Kukreja, L. M. [Laser Materials Processing Division, Raja Ramanna Centre for Advanced Technology, Indore 452 013 (India); Das, Gangadhar [Indus Synchrotrons Utilisation Division, Raja Ramanna Centre for Advanced Technology, Indore 452 013 (India)

    2016-01-18

    Dopant-profile independent electron transport has been observed through a combined study of temperature dependent electrical resistivity and magnetoresistance measurements on a series of Ti incorporated ZnO thin films with varying degree of static-disorder. These films were grown by atomic layer deposition through in-situ vertical stacking of multiple sub-monolayers of TiO{sub x} in ZnO. Upon decreasing ZnO spacer layer thickness, electron transport smoothly evolved from a good metallic to an incipient non-metallic regime due to the intricate interplay of screening of spatial potential fluctuations and strength of static-disorder in the films. Temperature dependent phase-coherence length as extracted from the magnetotransport measurement revealed insignificant role of inter sub-monolayer scattering as an additional channel for electron dephasing, indicating that films were homogeneously disordered three-dimensional electronic systems irrespective of their dopant-profiles. Results of this study are worthy enough for both fundamental physics perspective and efficient applications of multi-stacked ZnO/TiO{sub x} structures in the emerging field of transparent oxide electronics.

  18. Higher dietary intake of vitamin D may influence total cholesterol and carbohydrate profile independent of body composition in men with Chronic Spinal Cord Injury.

    Science.gov (United States)

    Beal, Christopher; Gorgey, Ashraf; Moore, Pamela; Wong, Nathan; Adler, Robert A; Gater, David

    2018-07-01

    A case-control design. To determine the effects of dietary vitamin D intake on insulin sensitivity (Si), glucose effectiveness (Sg), and lipid profile in individuals with spinal cord injury (SCI). 20 male, paraplegic (T3-L1) with chronic (> one year) motor complete SCI (AIS A or B) were recruited. Three-day dietary records were analyzed for dietary vitamin D (calciferol), and participants were assigned to one of two groups, a high vitamin D intake group and a low vitamin D intake group based on the mid-point of vitamin D frequency distribution. Individuals in both groups were matched based on age, weight, time since injury and level of injury. Sg, Si and lipid profiles were measured of the two groups. The high vitamin D group had an average intake of 5.33 ± 4.14 mcg compared to low vitamin D group, 0.74 ± 0.24 mcg. None of the 20 participants met the recommended guidelines for daily vitamin D intake. The higher vitamin D group had a significantly lower (P = 0.035) total cholesterol (148.00 ± 14.12 mg/dl) than the lower vitamin D group (171.80 ± 36.22 mg/dl). Vitamin D adjusted to total dietary intake was positively correlated to improvement in Si and Sg (PD intake. However, a higher dietary intake of vitamin D may influence total cholesterol and carbohydrate profile as demonstrated by a significant decrease in total cholesterol and improvement in glucose homeostasis independent of body composition changes after SCI.

  19. Can independent coronal multiplanar reformatted images obtained using state-of-the-art MDCT scanners be used for primary interpretation of MDCT of the abdomen and pelvis? A feasibility study

    International Nuclear Information System (INIS)

    Sebastian, Sunit; Kalra, Mannudeep K.; Mittal, Pardeep; Saini, Sanjay; Small, William C.

    2007-01-01

    independent review of coronal reformats as compared with transverse images alone (p < 0.001). Readers' confidence was also found to be higher on coronal evaluations as compared to axial images (p < 0.01). There was good interobserver agreement between the two readers. Conclusion: Independent coronal multiplanar reformatted images obtained using state-of-the-art MDCT scanners show promise as the preferred orientation and can be useful for primary interpretation of MDCT of the abdomen and pelvis

  20. Programs to obtain vertical heights from mean sea level and for computing volume of sand/mineral along beaches: A case study with Kalbadevi beach profiling data and results

    Digital Repository Service at National Institute of Oceanography (India)

    Ganesan, P.

    Two programs have been developed to process profile data, for obtaining vertical heights with respect to mean sea level (M.S.L.) and for computation of volume of heavy mineral / sand accumulation or erosion along the beaches. The final output...

  1. Inorganic profile of some Brazilian medicinal plants obtained from ethanolic extract and ''in natura'' samples

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, M.O.M.; de Sousa, P.T.; Salvador, V.L.R.; Sato, I.M.

    2004-10-03

    The Anadenathera macrocarpa, Schinus molle, Hymenaea courbaril, Cariniana legalis, Solidago microglossa and Stryphnodendron barbatiman, were collected ''in natura'' samples (leaves, flowers, barks and seeds) from different commercial suppliers. The pharmaco-active compounds in ethanolic extracts had been made by the Mato Grosso Federal University (UFMT). The energy-dispersive x-ray fluorescence (ED-XRF) spectrometry was used for the elemental analysis in different parts of the plants and respective ethanolic extracts. The Ca, Cl, Cu, Fe, K, Mg, Mn, Na, Ni, P, Rb, S, Sr and Zn concentrations were determined by the fundamental parameters method. Some specimens showed a similar inorganic profile for ''in natura'' and ethanolic extract samples and some ones showed a distinct inorganic profile. For example, the Anadenathera macrocarpa showed a similar concentration in Mg, P, Cu, Zn and Rb elements in ''in natura'' and ethanolic extract samples; however very different concentration in Na, S, Cl, K , Ca, Mn, Fe and Sr was observed in distinctive samples. The Solidago microglossa showed the K, Ca, Cl, S, Mg, P and Fe elements as major constituents in both samples, suggesting that the extraction process did not affect in a considerable way the ''in natura'' inorganic composition. The elemental composition of the different parts of the plants (leaves, flowers, barks and seeds) has been also determined. For example, the Schinus molle specimen showed P, K, Cl and Ca elements as major constituents in the seeds, Mg, K and Sr in the barks and Mg, S, Cl and Mn in the leaves, demonstrating a differentiated elementary distribution. These inorganic profiles will contribute to evaluate the quality control of the Brazilian herbaceous trade and also will assist to identify which parts of the medicinal plants has greater therapeutic effect.

  2. Influence of the Laser Spot Size, Focal Beam Profile, and Tissue Type on the Lipid Signals Obtained by MALDI-MS Imaging in Oversampling Mode.

    Science.gov (United States)

    Wiegelmann, Marcel; Dreisewerd, Klaus; Soltwisch, Jens

    2016-12-01

    To improve the lateral resolution in matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) beyond the dimensions of the focal laser spot oversampling techniques are employed. However, few data are available on the effect of the laser spot size and its focal beam profile on the ion signals recorded in oversampling mode. To investigate these dependencies, we produced 2 times six spots with dimensions between ~30 and 200 μm. By optional use of a fundamental beam shaper, square flat-top and Gaussian beam profiles were compared. MALDI-MSI data were collected using a fixed pixel size of 20 μm and both pixel-by-pixel and continuous raster oversampling modes on a QSTAR mass spectrometer. Coronal mouse brain sections coated with 2,5-dihydroxybenzoic acid matrix were used as primary test systems. Sizably higher phospholipid ion signals were produced with laser spots exceeding a dimension of ~100 μm, although the same amount of material was essentially ablated from the 20 μm-wide oversampling pixel at all spot size settings. Only on white matter areas of the brain these effects were less apparent to absent. Scanning electron microscopy images showed that these findings can presumably be attributed to different matrix morphologies depending on tissue type. We propose that a transition in the material ejection mechanisms from a molecular desorption at large to ablation at smaller spot sizes and a concomitant reduction in ion yields may be responsible for the observed spot size effects. The combined results indicate a complex interplay between tissue type, matrix crystallization, and laser-derived desorption/ablation and finally analyte ionization. Graphical Abstract ᅟ.

  3. Compositional Shift in Fatty Acid Profiles of Lipids Obtained from Oleaginous Yeasts upon the Addition of Essential Oil from Citrus sinensis L.

    Science.gov (United States)

    Uprety, Bijaya K; Rakshit, Sudip K

    2017-12-01

    Tailoring lipids from oleaginous yeasts to contain specific types of fatty acid is of considerable interest to food, fuel, and pharmaceutical industries. In this study, the essential oil obtained from Citrus sinesus L. has been used to alter the fatty acid composition of two common oleaginous yeasts, Rhodosporidium toruloides and Cryptococcus curvatus. With increasing levels of essential oil in the medium, the metabolic flux of the fatty acid biosynthesis pathway shifted towards saturated fatty acid production. Essential oil reduced the activities of elongase and ∆9 desaturase. This made the lipid obtained from both these yeasts rich in saturated fatty acids. At certain specific concentrations of the essential oil in the medium, the lipid obtained from R. toruloides and C. curvatus cultures was similar to mahuwa butter and palm oil, respectively. Limonene is the major constituents of orange essential oil. Its effect on one of the oleaginous yeasts, R. toruloides, was also studied separately. Effects similar to orange essential oil were obtained with limonene. Thus, we can conclude that limonene in orange essential oil brings about compositional change of microbial lipid produced in this organism.

  4. Phytochemical profile, antioxidant and antimicrobial activity of extracts obtained from erva-mate (Ilex paraguariensis) fruit using compressed propane and supercritical CO2.

    Science.gov (United States)

    Fernandes, Ciro E F; Scapinello, Jaqueline; Bohn, Aline; Boligon, Aline A; Athayde, Margareth L; Magro, Jacir Dall; Palliga, Marshall; Oliveira, J Vladimir; Tres, Marcus V

    2017-01-01

    Traditionally, Ilex paraguariensis leaves are consumed in tea form or as typical drinks like mate and terere, while the fruits are discarded processing and has no commercial value. The aim of this work to evaluate phytochemical properties, total phenolic compounds, antioxidant and antimicrobial activity of extracts of Ilex paraguariensis fruits obtained from supercritical CO 2 and compressed propane extraction. The extraction with compressed propane yielded 2.72 wt%, whereas with supercritical CO 2 1.51 wt% was obtained. The compound extracted in larger amount by the two extraction solvents was caffeine, 163.28 and 54.17 mg/g by supercritical CO 2 and pressurized propane, respectively. The antioxidant activity was more pronounced for the supercritical CO 2 extract, with no difference found in terms of minimum inhibitory concentration for Staphylococcus aureus for the two extracts and better results observed for Escherichia coli when using supercritical CO 2 .

  5. [Transciptome among Mexicans: a large scale methodology to analyze the genetics expression profile of simultaneous samples in muscle, adipose tissue and lymphocytes obtained from the same individual].

    Science.gov (United States)

    Bastarrachea, Raúl A; López-Alvarenga, Juan Carlos; Kent, Jack W; Laviada-Molina, Hugo A; Cerda-Flores, Ricardo M; Calderón-Garcidueñas, Ana Laura; Torres-Salazar, Amada; Torres-Salazar, Amanda; Nava-González, Edna J; Solis-Pérez, Elizabeth; Gallegos-Cabrales, Esther C; Cole, Shelley A; Comuzzie, Anthony G

    2008-01-01

    We describe the methodology used to analyze multiple transcripts using microarray techniques in simultaneous biopsies of muscle, adipose tissue and lymphocytes obtained from the same individual as part of the standard protocol of the Genetics of Metabolic Diseases in Mexico: GEMM Family Study. We recruited 4 healthy male subjects with BM1 20-41, who signed an informed consent letter. Subjects participated in a clinical examination that included anthropometric and body composition measurements, muscle biopsies (vastus lateralis) subcutaneous fat biopsies anda blood draw. All samples provided sufficient amplified RNA for microarray analysis. Total RNA was extracted from the biopsy samples and amplified for analysis. Of the 48,687 transcript targets queried, 39.4% were detectable in a least one of the studied tissues. Leptin was not detectable in lymphocytes, weakly expressed in muscle, but overexpressed and highly correlated with BMI in subcutaneous fat. Another example was GLUT4, which was detectable only in muscle and not correlated with BMI. Expression level concordance was 0.7 (p< 0.001) for the three tissues studied. We demonstrated the feasibility of carrying out simultaneous analysis of gene expression in multiple tissues, concordance of genetic expression in different tissues, and obtained confidence that this method corroborates the expected biological relationships among LEPand GLUT4. TheGEMM study will provide a broad and valuable overview on metabolic diseases, including obesity and type 2 diabetes.

  6. Ceratonia siliqua L. hydroethanolic extract obtained by ultrasonication: antioxidant activity, phenolic compounds profile and effects in yogurts functionalized with their free and microencapsulated forms.

    Science.gov (United States)

    Rached, Irada; Barros, Lillian; Fernandes, Isabel P; Santos-Buelga, Celestino; Rodrigues, Alírio E; Ferchichi, Ali; Barreiro, Maria Filomena; Ferreira, Isabel C F R

    2016-03-01

    Bioactive extracts were obtained from powdered carob pulp through an ultrasound extraction process and then evaluated in terms of antioxidant activity. Ten minutes of ultrasonication at 375 Hz were the optimal conditions leading to an extract with the highest antioxidant effects. After its chemical characterization, which revealed the preponderance of gallotannins, the extract (free and microencapsulated) was incorporated in yogurts. The microspheres were prepared using an extract/sodium alginate ratio of 100/400 (mg mg(-1)) selected after testing different ratios. The yogurts with the free extract exhibited higher antioxidant activity than the samples added with the encapsulated extracts, showing the preserving role of alginate as a coating material. None of the forms significantly altered the yogurt's nutritional value. This study confirmed the efficiency of microencapsulation to stabilize functional ingredients in food matrices maintaining almost the structural integrity of polyphenols extracted from carob pulp and furthermore improving the antioxidant potency of the final product.

  7. Protein profiles of Taenia solium cysts obtained from skeletal muscles and the central nervous system of pigs: Search for tissue-specific proteins.

    Science.gov (United States)

    Navarrete-Perea, José; Moguel, Bárbara; Bobes, Raúl José; Villalobos, Nelly; Carrero, Julio César; Sciutto, Edda; Soberón, Xavier; Laclette, Juan Pedro

    2017-01-01

    Taeniasis/cysticercosis caused by the tapeworm Taenia solium is a parasite disease transmitted among humans and pigs, the main intermediate host. The larvae/cysts can lodge in several tissues of the pig, i.e. skeletal muscles and different locations of the central nervous system. The molecular mechanisms associated to tissue preferences of the cysts remain poorly understood. The major public health concern about this zoonosis is due to the human infections by the larval form in the central nervous system, causing a highly pleomorphic and debilitating disease known as neurocysticercosis. This study was aimed to explore the 2DE protein maps of T. solium cysts obtained from skeletal muscles and central nervous system of naturally infected pigs. The gel images were analyzed through a combination of PDQuest™ and multivariate analysis. Results showed that differences in the protein patterns of cysts obtained from both tissues were remarkably discrete. Only 7 protein spots were found specifically associated to the skeletal muscle localization of the cysts; none was found significantly associated to the central nervous system. The use of distinct protein fractions of cysts allowed preliminary identification of several tissue-specific antigenic bands. The implications of these findings are discussed, as well as several strategies directed to achieve the complete characterization of this parasite's proteome, in order to extend our understanding of the molecular mechanisms underlying tissue localization of the cysts and to open avenues for the development of immunological tissue-specific diagnosis of the disease. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. Phytochemical profile and antioxidant capacity of virgin olive oil obtained from the olive cultivar ‘Roghiani’ from different regions of northern Libya

    Directory of Open Access Journals (Sweden)

    S. M. Esalami

    2018-06-01

    Full Text Available The aim of this work was to determine the fatty acids (FA, tocopherols, phenols, and antioxidant capacity (AC of five virgin olive oils (VOO obtained from the olive cultivar ‘Roghiani’, from different regions of northern Libya during the crop year 2015. The parameters determined for the oils were investigated for the first time. Seven principal FAs were detected in the VOO samples. Oleic, palmitic, and linoleic acids were the dominant ones. The highest percentage of palmitic acid was found in Tripoli VOO (P ≤ 0.05. Oleic acid was dominant in all the VOO samples. Gharyan VOO possessed the highest value of oleic acid, O/L ratio, monounsaturated fatty acids (MUFA, total phenols content (TPC, total tocopherol and tocotrienol contents (TTC, and ACDPPH % (P ≤ 0.05. A strong positive relationship between TPC and (AC as (1/EC50DPPH was observed, (r was +0.831. On the other hand, (1/EC50DPPH showed a positive correlation with TTC, (r was +0.768.

  9. Hydraulic conductivity obtained by instantaneous profile method using retention curve and neutron probes and Genuchten model; Condutividade hidraulica obtida pelo metodo do perfil instantaneo utilizando curva de retencao e sonda de neutrons e pelo modelo de Genuchten

    Energy Technology Data Exchange (ETDEWEB)

    Berretta, Ana Lucia Olmedo

    1999-07-01

    The hydraulic conductivity is one of the most important parameters to understand the movement of water in the unsaturated zone. Reliable estimations are difficult to obtain, once the hydraulic conductivity is highly variable. This study was carried out at 'Escola Superior de Agricultura Luiz de Queiroz', Universidade de Sao Paulo, in a Kandiudalfic Eutrudox soil. The hydraulic conductivity was determined by a direct and an indirect method. The instantaneous profile method was described and the hydraulic conductivity as a function of soil water content was determined by solving the Richards equation. Tensiometers were used to estimate the total soil water potential, and the neutron probe and the soil retention curve were used to estimate soil water content in the direct method. The neutron probe showed to be not adequately sensible to the changes of soil water content in this soil. Despite of the soil retention curve provides best correlation values to soil water content as a function of water redistribution time, the soil water content in this soil did not vary too much till the depth of 50 cm, reflecting the influence of the presence of a Bt horizon. The soil retention curve was well fitted by the van Genuchten model used as an indirect method. The values of the van Genuchten and the experimental relative hydraulic conductivity obtained by the instantaneous profile method provided a good correlation. However, the values estimated by the model were always lower than that ones obtained experimentally. (author)

  10. Obtención de modelo matemático para el desarrollo del perfil del ala de una aeronave. // Obtaining a mathematical model for the development of the profile of the airship wing.

    Directory of Open Access Journals (Sweden)

    R. Cabrera Pedroso

    2008-05-01

    Full Text Available El presente trabajo está dirigido a brindar un modelo matemático que permita el cálculo y determinación de una funciónanalítica para la obtención del perfil de un ala de geometría simétrica y variable de una aeronave con el empleo de métodoscomputacionales. En el artículo se analiza los métodos para la elaboración de sistemas de cálculo basados en modelosmatemáticos obtenidos en MATLAB 7.0 e implementados con el software LabVIEW 6.0 a través de programas de diseñosasistidos por computadoras en AUTOCAD (AUTOLISP. Los diferentes tópicos abordados dan a los interesados una ideaglobal del desarrollo de esta tecnología computacional y su aplicación a ramas de la mecánica, así como la metodologíaseguida para obtener el perfil aerodinámico de un ala. También se exponen aspectos generales del empleo de la funciónAUTOLISP y el código fuente del programa diseñado.Palabras claves: perfil de alas, modelos matemáticos, AutoCAD, AutoLISP, medición experimental.__________________________________________________________________________Abstract.This article was carried out to obtain a mathematical model that allows the calculation and determination of an analyticfunction of symmetrical geometry profile and variable. In the article it is analyzed the methods for the elaboration ofsystem of calculations based on mathematical models obtained with the software language LabVIEW 6.0 and it is used todeveloping the program attended by the computers AUTOCAD (AUTOLISP. The approached topics give to the interestedparties a global idea of the development it gives this technology and their application to branches of the mechanicalspecialties, as well as the followed methodology to obtain the aerofoil profile of a wing. General aspects are also exposedof the employment of the function AUTOLISP and the source code on the sketch program.Key words: Wing profiles, mathematical models, AutoCAD, AutoLISP, experimental measurement.

  11. Are Independent Probes Truly Independent?

    Science.gov (United States)

    Camp, Gino; Pecher, Diane; Schmidt, Henk G.; Zeelenberg, Rene

    2009-01-01

    The independent cue technique has been developed to test traditional interference theories against inhibition theories of forgetting. In the present study, the authors tested the critical criterion for the independence of independent cues: Studied cues not presented during test (and unrelated to test cues) should not contribute to the retrieval…

  12. Ovarian SAHA syndrome is associated with a more insulin-resistant profile and represents an independent risk factor for glucose abnormalities in women with polycystic ovary syndrome: a prospective controlled study.

    Science.gov (United States)

    Dalamaga, Maria; Papadavid, Evangelia; Basios, Georgios; Vaggopoulos, Vassilios; Rigopoulos, Dimitrios; Kassanos, Dimitrios; Trakakis, Eftihios

    2013-12-01

    SAHA syndrome is characterized by the tetrad: seborrhea, acne, hirsutism, and androgenetic alopecia. No previous study has examined the prevalence of glucose abnormalities in ovarian SAHA and explored whether it may be an independent risk factor for glucose abnormalities. In a prospective controlled study, we investigated the spectrum of glucose abnormalities in ovarian SAHA and explored whether it is associated with a more insulin-resistant profile. In all, 316 patients with a diagnosis of polycystic ovary syndrome (PCOS) (56 with SAHA) and 102 age-matched healthy women were examined and underwent a 2-hour oral glucose tolerance test. Serum glucose homeostasis parameters, hormones, and adipokines were determined. SAHA prevalence was 17.7% in patients with PCOS and predominance of the severe PCOS phenotype. Ovarian SAHA was independently associated with a more insulin-resistant profile (higher homeostatic model assessment of insulin resistance score, lower quantitative insulin sensitivity check index [QUICKI] and MATSUDA indices, and relative hypoadiponectinemia), and represented an independent risk factor for glucose abnormalities regardless of anthropometric features, age, and PCOS phenotype. There was no performance of skin biopsies. The prompt recognition of SAHA syndrome in women with PCOS permits an earlier diagnosis and surveillance of metabolic abnormalities, especially in Mediterranean PCOS population exhibiting a lower prevalence of glucose abnormalities. Copyright © 2013 American Academy of Dermatology, Inc. Published by Mosby, Inc. All rights reserved.

  13. Clinical benefit, complication patterns and cost effectiveness of laser in situ keratomileusis (LASIK) in moderate myopia: results of independent meta analyses on clinical outcome and postoperative complication profiles.

    Science.gov (United States)

    Lamparter, J; Dick, H B; Krummenauer, Frank

    2005-09-12

    Laser in situ keratomileusis (LASIK) means a patient investment of 2426 Euro per eye, which usually cannot be funded by European health care insurers. In the context of recent resource allocation discussions, however, the cost effectiveness of LASIK could become an important indication of allocation decisions. Therefore an evidence based estimation of its incremental cost effectiveness was intended. Three independent meta analyses were implemented to estimate the refractive gain (dpt) due to conventional LASIK procedures as well as the predictability of the latter (%) (fraction of eyes achieving a postoperative refraction with maximum deviation of +/- 0.5 dpt from the target refraction). Study reports of 1995 - 2004 (English or German language) were screened for appropriate key words. Meta effects in refractive gain and predictability were estimated by means and standard deviations of reported effect measures. Cost data were estimated by German DRG rates and individual clinical pathway calculations; cost effectiveness was then computed in terms of the incremental cost effectiveness ratio (ICER) for both clinical benefit endpoints. A sensitivity analysis comprised cost variations of +/- 10 % and utility variations alongside the meta effects' 95% confidence intervals. Total direct costs from the patients' perspective were estimated at 2426 Euro per eye, associated with a refractive meta benefit of 5.93 dpt (95% meta confidence interval 5.32 - 6.54 dpt) and a meta predictability of 67% (43% - 91%). In terms of incremental costs, the unilateral LASIK implied a patient investion of 409 Euro (sensitivity range 351 - 473 Euro) per gained refractive unit or 36 Euro (27 - 56 Euro) per gained percentage point in predictability. When LASIK associated complication patterns were considered, the total direct costs amounted up to 3075 Euro, resulting in incremental costs of 519 Euro / dpt (sensitivity range 445 - 600 Euro / dpt) or 46 Euro / % (34 - 72 Euro / %). Most frequently

  14. Molecular profiling of fungal communities in moisture damaged buildings before and after remediation--a comparison of culture-dependent and culture-independent methods.

    Science.gov (United States)

    Pitkäranta, Miia; Meklin, Teija; Hyvärinen, Anne; Nevalainen, Aino; Paulin, Lars; Auvinen, Petri; Lignell, Ulla; Rintala, Helena

    2011-10-21

    Indoor microbial contamination due to excess moisture is an important contributor to human illness in both residential and occupational settings. However, the census of microorganisms in the indoor environment is limited by the use of selective, culture-based detection techniques. By using clone library sequencing of full-length internal transcribed spacer region combined with quantitative polymerase chain reaction (qPCR) for 69 fungal species or assay groups and cultivation, we have been able to generate a more comprehensive description of the total indoor mycoflora. Using this suite of methods, we assessed the impact of moisture damage on the fungal community composition of settled dust and building material samples (n = 8 and 16, correspondingly). Water-damaged buildings (n = 2) were examined pre- and post- remediation, and compared with undamaged reference buildings (n = 2). Culture-dependent and independent methods were consistent in the dominant fungal taxa in dust, but sequencing revealed a five to ten times higher diversity at the genus level than culture or qPCR. Previously unknown, verified fungal phylotypes were detected in dust, accounting for 12% of all diversity. Fungal diversity, especially within classes Dothideomycetes and Agaricomycetes tended to be higher in the water damaged buildings. Fungal phylotypes detected in building materials were present in dust samples, but their proportion of total fungi was similar for damaged and reference buildings. The quantitative correlation between clone library phylotype frequencies and qPCR counts was moderate (r = 0.59, p environments. However, making conclusions concerning the effect of building conditions on building mycobiota using this methodology was complicated by the wide natural diversity in the dust samples, the incomplete knowledge of material-associated fungi fungi and the semiquantitative nature of sequencing based methods.

  15. Genome-Wide Transcriptional Profiles of the Berry Skin of Two Red Grape Cultivars (Vitis vinifera) in Which Anthocyanin Synthesis Is Sunlight-Dependent or -Independent

    Science.gov (United States)

    Guan, Le; Xin, Hai-Ping; Li, Ji-Hu; Li, Shao-Hua

    2014-01-01

    Global gene expression was analyzed in the berry skin of two red grape cultivars, which can (‘Jingyan’) or cannot (‘Jingxiu’) synthesize anthocyanins after sunlight exclusion from fruit set until maturity. Gene transcripts responding to sunlight exclusion in ‘Jingyan’ were less complex than in ‘Jingxiu’; 528 genes were induced and 383 repressed in the former, whereas 2655 genes were induced and 205 suppressed in ‘Jingxiu’. They were regulated either in the same or opposing manner in the two cultivars, or in only one cultivar. In addition to VvUFGT and VvMYBA1, some candidate genes (e.g. AOMT, GST, and ANP) were identified which are probably involved in the differential responses of ‘Jingxiu’ and ‘Jingyan’ to sunlight exclusion. In addition, 26 MYB, 14 bHLH and 23 WD40 genes responded differently to sunlight exclusion in the two cultivars. Interestingly, all of the 189 genes classified as being relevant to ubiquitin-dependent protein degradation were down-regulated by sunlight exclusion in ‘Jingxiu’, but the majority (162) remained unchanged in ‘Jingyan’ berry skin. It would be of interest to determine the precise role of the ubiquitin pathway following sunlight exclusion, particularly the role of COP9 signalosome, cullins, RING-Box 1, and COP1-interacting proteins. Only a few genes in the light signal system were found to be regulated by sunlight exclusion in either or both cultivars. This study provides a valuable overview of the transcriptome changes and gives insight into the genetic background that may be responsible for sunlight-dependent versus -independent anthocyanin biosynthesis in berry skin. PMID:25158067

  16. Dose profile for electron beams obtained with CaSO{sub 4}:Ce,Eu thermoluminescent dosimeters; Perfil de dose de feixes de eletrons obtidos com dosimetros termoluminescentes de CaSO{sub 4}:Ce,Eu

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, Maira G.; Rodrigues, Leticia L.C., E-mail: mgnunes@ipen.br [Instituto de Pesquisas Energerticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2012-12-15

    The calcium sulphate activated with cerium and europium (CaSO{sub 4}:Ce,Eu) thermoluminescent dosimeters (TLD) recently developed at Nuclear and Energy Research Institute as well as the calcium sulphate activated with dysprosium (CaSO{sub 4}: Dy) and lithium fluoride activated with magnesium and titanium, (LiF:Mg,Ti; TLD-100) TLDs, with long term applications in dosimetry and considered as standards, were used to obtain the dose profile for 3.43, 5.48, 8.27 and 11.67 MeV electron beams generated by a linear accelerator Clinac 2100-C (Varian) in the reference conditions defined by the TRS-398 code of practice. The routine dosimetry of the electron beams, performed with a calibrated ionization chamber, ensures that the electron beams fulfill the requirements of flatness and symmetry established in this code of practice. Thus, as the TRS-398 Code of Practice requirements are fulfilled by the measurements performed with the new TLD type, CaSO{sub 4}:Ce,Eu may be applied in clinical dosimetry of high energy electron beams. (author)

  17. Dissolved inorganic carbon, alkalinity, temperature, salinity and other variables collected from discrete sample and profile observations using CTD, bottle and other instruments obtained during the R/V Discovery EEL_2011_D365 Cruise Along Extended Ellett Line from 2011-05-20 to 2011-05-31 (NCEI Accession 0157258)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NCEI Accession 0157258 includes chemical, discrete sample, physical and profile data obtained during the R/V Discovery EEL_2011_D365 Cruise Along Extended Ellett...

  18. Characterization of AKT independent effects of the synthetic AKT inhibitors SH-5 and SH-6 using an integrated approach combining transcriptomic profiling and signaling pathway perturbations

    Directory of Open Access Journals (Sweden)

    Schäfer Reinhold

    2010-06-01

    Full Text Available Abstract Background Signal transduction processes mediated by phosphatidyl inositol phosphates affect a broad range of cellular processes such as cell cycle progression, migration and cell survival. The protein kinase AKT is one of the major effectors in this signaling network. Chronic AKT activation contributes to oncogenic transformation and tumor development. Therefore, analogs of phosphatidyl inositol phosphates (PIAs were designed as new small drugs to block AKT activity for cancer treatment. Here we characterize the biological effects of the PIAs SH-5 and SH-6 in colorectal cancer cell lines. Methods Serum-starved or serum-supplemented human colorectal cancer cell lines SW480, HT29 and HCT116 were exposed to SH-5 and SH-6. AKT activation was determined by western blotting. Cell viability was assessed using a colorimetric XTT-based assay, apoptosis and cell cycle changes were monitored by FACS analysis. The dynamics of cell morphology alterations was evaluated by confocal and time-lapse microscopy. Transcriptional changes due to inhibitor treatment were analyzed using Affymetrix HG-U133A microarrays and RT-PCR. Results While the PIAs clearly reduce AKT phosphorylation in serum starved cells, we did not observe a significant reduction under serum supplemented conditions, giving us the opportunity to analyze AKT independent effects of these compounds. Both inhibitors induce broadly the same morphological alterations, in particular changes in cell shape and formation of intracellular vesicles. Moreover, we observed the induction of binucleated cells specifically in the SW480 cell line. Gene expression analysis revealed transcriptional alterations, which are mostly cell line specific. In accordance to the phenotype we found a gene group associated with mitosis and spindle organization down regulated in SW480 cells, but not in the other cell lines. A bioinformatics analysis using the Connectivity Map linked the gene expression pattern of the

  19. Molecular profiling of fungal communities in moisture damaged buildings before and after remediation - a comparison of culture-dependent and culture-independent methods

    Directory of Open Access Journals (Sweden)

    Auvinen Petri

    2011-10-01

    Full Text Available Abstract Background Indoor microbial contamination due to excess moisture is an important contributor to human illness in both residential and occupational settings. However, the census of microorganisms in the indoor environment is limited by the use of selective, culture-based detection techniques. By using clone library sequencing of full-length internal transcribed spacer region combined with quantitative polymerase chain reaction (qPCR for 69 fungal species or assay groups and cultivation, we have been able to generate a more comprehensive description of the total indoor mycoflora. Using this suite of methods, we assessed the impact of moisture damage on the fungal community composition of settled dust and building material samples (n = 8 and 16, correspondingly. Water-damaged buildings (n = 2 were examined pre- and post- remediation, and compared with undamaged reference buildings (n = 2. Results Culture-dependent and independent methods were consistent in the dominant fungal taxa in dust, but sequencing revealed a five to ten times higher diversity at the genus level than culture or qPCR. Previously unknown, verified fungal phylotypes were detected in dust, accounting for 12% of all diversity. Fungal diversity, especially within classes Dothideomycetes and Agaricomycetes tended to be higher in the water damaged buildings. Fungal phylotypes detected in building materials were present in dust samples, but their proportion of total fungi was similar for damaged and reference buildings. The quantitative correlation between clone library phylotype frequencies and qPCR counts was moderate (r = 0.59, p Conclusions We examined a small number of target buildings and found indications of elevated fungal diversity associated with water damage. Some of the fungi in dust were attributable to building growth, but more information on the material-associated communities is needed in order to understand the dynamics of microbial communities between

  20. Characterization of AKT independent effects of the synthetic AKT inhibitors SH-5 and SH-6 using an integrated approach combining transcriptomic profiling and signaling pathway perturbations

    International Nuclear Information System (INIS)

    Krech, Till; Thiede, Margarethe; Hilgenberg, Ellen; Schäfer, Reinhold; Jürchott, Karsten

    2010-01-01

    Signal transduction processes mediated by phosphatidyl inositol phosphates affect a broad range of cellular processes such as cell cycle progression, migration and cell survival. The protein kinase AKT is one of the major effectors in this signaling network. Chronic AKT activation contributes to oncogenic transformation and tumor development. Therefore, analogs of phosphatidyl inositol phosphates (PIAs) were designed as new small drugs to block AKT activity for cancer treatment. Here we characterize the biological effects of the PIAs SH-5 and SH-6 in colorectal cancer cell lines. Serum-starved or serum-supplemented human colorectal cancer cell lines SW480, HT29 and HCT116 were exposed to SH-5 and SH-6. AKT activation was determined by western blotting. Cell viability was assessed using a colorimetric XTT-based assay, apoptosis and cell cycle changes were monitored by FACS analysis. The dynamics of cell morphology alterations was evaluated by confocal and time-lapse microscopy. Transcriptional changes due to inhibitor treatment were analyzed using Affymetrix HG-U133A microarrays and RT-PCR. While the PIAs clearly reduce AKT phosphorylation in serum starved cells, we did not observe a significant reduction under serum supplemented conditions, giving us the opportunity to analyze AKT independent effects of these compounds. Both inhibitors induce broadly the same morphological alterations, in particular changes in cell shape and formation of intracellular vesicles. Moreover, we observed the induction of binucleated cells specifically in the SW480 cell line. Gene expression analysis revealed transcriptional alterations, which are mostly cell line specific. In accordance to the phenotype we found a gene group associated with mitosis and spindle organization down regulated in SW480 cells, but not in the other cell lines. A bioinformatics analysis using the Connectivity Map linked the gene expression pattern of the inhibitor treated SW480 cells to PKC signaling. Using

  1. Real-time PCR expression profiling of genes encoding potential virulence factors in Candida albicans biofilms: identification of model-dependent and -independent gene expression

    Directory of Open Access Journals (Sweden)

    Řičicová Markéta

    2010-04-01

    levels were observed. This suggests that data obtained in one biofilm model cannot be extrapolated to other model systems. Therefore, the need to use multiple model systems when studying the expression of genes encoding potential virulence factors in C. albicans biofilms is highlighted.

  2. Programs to obtain vertical heights from mean sea level and for computing volume of sand/mineral along beaches:A case study with Kalbadevi beach profiling data and results.

    Digital Repository Service at National Institute of Oceanography (India)

    Ganesan, P.

    vertical heights along profiles from M.S.L.? is given below: The reduced level over the bench mark pillar (BP:1 in this case, from where the profile starts) should be added with the first staff reading taken over it, which forms the height... of collimation (H.C.) of the instrument. From this H.C., all the successive staff readings (taken at regular distance interval, along the profile) should be deducted to get the vertical heights (called reduced level (R.L.) in survey terms). i) R...

  3. Independent Directors

    DEFF Research Database (Denmark)

    Ringe, Wolf-Georg

    2013-01-01

    This paper re-evaluates the corporate governance concept of ‘board independence’ against the disappointing experiences during the 2007-08 financial crisis. Independent or outside directors had long been seen as an essential tool to improve the monitoring role of the board. Yet the crisis revealed...... that they did not prevent firms' excessive risk taking; further, these directors sometimes showed serious deficits in understanding the business they were supposed to control, and remained passive in addressing structural problems. A closer look reveals that under the surface of seemingly unanimous consensus...

  4. Professional assessment of facial profile attractiveness.

    Science.gov (United States)

    Soh, Jen; Chew, Ming Tak; Wong, Hwee Bee

    2005-08-01

    The aim of this study was to compare the assessments of Chinese facial profile attractiveness by orthodontists and oral surgeons. The sample comprised 31 dental professionals (20 orthodontists, 11 oral surgeons) in an Asian community. Facial profile photographs and lateral cephalometric radiographs of 2 Chinese adults (1 man, 1 woman) with normal profiles, Class I incisor relationships, and Class I skeletal patterns were digitized. The digital images were modified by altering cephalometric skeletal and dental hard tissue Chinese normative values in increments of 2 standard deviations in the anteroposterior plane to obtain 7 facial profiles for each sex. The images were bimaxillary protrusion, protrusive mandible, retrusive mandible, normal profile (Class I incisor with Class I skeletal pattern), retrusive maxilla, protrusive maxilla, and bimaxillary retrusion. The Mann-Whitney U test was used to determine professional differences in assessment. Multiple regression analysis was performed with age, professional status, sex, and number of years in practice as independent variables. A strong correlation was found in the profile assessment between orthodontists and oral surgeons. Normal and bimaxillary retrusive Chinese male and female profiles were judged to be highly attractive by orthodontists and oral surgeons. Chinese male and female profiles with protrusive mandibles were judged the least attractive. There was a difference in professional opinion about the most attractive male profile (P profile and oral surgeons preferring a fuller normal Chinese profile. Sex of dental professionals and number of years in clinical practice were found to affect profile rankings.

  5. Double-blind randomised controlled trial of the independent and synergistic effect of Spirulina maxima with exercise (ISESE) on general fitness, lipid profile and redox status in overweight and obese subjects: study protocol.

    Science.gov (United States)

    Hernández-Lepe, Marco Antonio; López-Díaz, José Alberto; Rosa, Laura Alejandra de la; Hernández-Torres, Rosa Patricia; Wall-Medrano, Abraham; Juarez-Oropeza, Marco Antonio; Pedraza-Chaverri, José; Urquidez-Romero, Rene; Ramos-Jiménez, Arnulfo

    2017-06-23

    In order to reduce cardiovascular disease risk factors, a healthy diet must include dietary antioxidants from different sources (eg, Spirulina maxima ) and regular practice of exercise should be promoted. There is some evidence from animal studies that S. maxima and exercise decrease cardiovascular disease risks factors. However, very few studies have proved the independent or synergistic effect of S. maxima plus exercise in humans. This study attempts to address the independent and synergistic effects in overweight and obese subjects participating in a systematic physical exercise programme at moderate intensity on general fitness, plasma lipid profile and antioxidant capacity. Using a randomised, double-blind, placebo-controlled, counterbalanced crossover study design, 80 healthy overweight and obese subjects will be evaluated during a 12-week isoenergetic diet accompanied by 4.5 g/day S. maxima intake and/or a physical systematic exercise programme at moderate intensity. Body composition, oxygen uptake, heart rate, capillary blood lactate, plasma concentrations of triacylglycerols, total, low-density and high-density lipoprotein cholesterol, antioxidant status, lipid oxidation, protein carbonyls, superoxide dismutase, catalase, glutathione, glutathione peroxidase, glutathione reductase and paraoxonase will be assessed. This study and all the procedures have been approved by the Universidad Autonoma de Ciudad Juarez Bioethics Committee. Findings will be disseminated through peer-reviewed journals, national and international conferences. ClinicalTrials.gov: NCT02837666. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  6. [Poison cases and types of poisons based on data obtained of patients hospitalized from 1995-2009 with acute poisoning in the second internal ward in a multi-profile provincial hospital in Tarnow].

    Science.gov (United States)

    Lata, Stanisław; Janiszewski, Jacek

    2010-01-01

    The thesis presents a short history and organization of an acute poisoning centre in the1995 functioning within the internal diseases department in a multi-profile provincial hospital. The data show the number of patients treated beetween 1995-2009 an the types of toxic substances that caused poisoning. The conclusions presented refer to the role of the centre to help people suffering from acute poisoning within the city of Tarnow.

  7. Obtaining of inulin acetate

    OpenAIRE

    Khusenov, Arslonnazar; Rakhmanberdiev, Gappar; Rakhimov, Dilshod; Khalikov, Muzaffar

    2014-01-01

    In the article first obtained inulin ester inulin acetate, by etherification of inulin with acetic anhydride has been exposed. Obtained product has been studied using elementary analysis and IR spectroscopy.

  8. Perfil de beta talassemia heterozigota obtido a partir de análise data mining em banco de dados The profile of beta thalassemia obtained by data mining analysis in a database

    Directory of Open Access Journals (Sweden)

    Ana L. B. Domingos

    2010-02-01

    Full Text Available Variations in the phenotypic expression of heterozygous beta thalassemia reflect the formation of different populations. To better understand the profile of heterozygous beta-thalassemia of the Brazilian population, we aimed at establishing parameters to direct the diagnosis of carriers and calculate the frequency from information stored in an electronic database. Using a Data Mining tool, we evaluated information on 10,960 blood samples deposited in a relational database. Over the years, improved diagnostic technology has facilitated the elucidation of suspected beta thalassemia heterozygote cases with an average frequency of 3.5% of referred cases. We also found that the Brazilian beta thalassemia trait has classic increases of Hb A2 and Hb F (60%, mainly caused by mutations in beta zero thalassemia, especially in the southeast of the country.

  9. Independent production and Poisson distribution

    International Nuclear Information System (INIS)

    Golokhvastov, A.I.

    1994-01-01

    The well-known statement of factorization of inclusive cross-sections in case of independent production of particles (or clusters, jets etc.) and the conclusion of Poisson distribution over their multiplicity arising from it do not follow from the probability theory in any way. Using accurately the theorem of the product of independent probabilities, quite different equations are obtained and no consequences relative to multiplicity distributions are obtained. 11 refs

  10. The poloidal OHM's law and a profile constraint in tokamaks

    International Nuclear Information System (INIS)

    Segre, S.E.; Zanza, V.

    1991-01-01

    Explicit use of the poloidal Ohm's law, together with the radial plasma velocity (obtained from the distribution of plasma sources), leads to a very general constraint on the possible radial profiles of plasma density and temperature. The constraint does not require any ad hoc assumption; it can place severe restrictions on the allowed profiles and is independent of energy and particle transport; also, it may be the underlying principle of profile consistency. The constraint is discussed in the framework of neoclassical theory, using results from the Frascati tokamak. (author). 23 refs, 7 figs

  11. Potential profiles obtained from applied dust cloud perturbations

    International Nuclear Information System (INIS)

    Thomas, Edward Jr.

    2002-01-01

    This paper details an experimental investigation of the local potential structure within a cloud of suspended microparticles - a 'dusty' or 'complex' plasma - using particle image velocimetry (PIV) techniques. Applied perturbations, synchronized to the PIV measurements, are used to force a cloud of suspended microparticles to become unconfined. From the free-streaming motion of the particles during the loss of confinement and subsequent reformation of the dust cloud, an analysis of the potential is performed. Furthermore, a new method of analyzing the potential structure from the motion of free-streaming microparticles in the plasma is presented

  12. Independence and Product Systems

    OpenAIRE

    Skeide, Michael

    2003-01-01

    Starting from elementary considerations about independence and Markov processes in classical probability we arrive at the new concept of conditional monotone independence (or operator-valued monotone independence). With the help of product systems of Hilbert modules we show that monotone conditional independence arises naturally in dilation theory.

  13. Are Independent Fiscal Institutions Really Independent?

    Directory of Open Access Journals (Sweden)

    Slawomir Franek

    2015-08-01

    Full Text Available In the last decade the number of independent fiscal institutions (known also as fiscal councils has tripled. They play an important oversight role over fiscal policy-making in democratic societies, especially as they seek to restore public finance stability in the wake of the recent financial crisis. Although common functions of such institutions include a role in analysis of fiscal policy, forecasting, monitoring compliance with fiscal rules or costing of spending proposals, their roles, resources and structures vary considerably across countries. The aim of the article is to determine the degree of independence of such institutions based on the analysis of the independence index of independent fiscal institutions. The analysis of this index values may be useful to determine the relations between the degree of independence of fiscal councils and fiscal performance of particular countries. The data used to calculate the index values will be derived from European Commission and IMF, which collect sets of information about characteristics of activity of fiscal councils.

  14. Gestational Diabetes Mellitus Worsens the Profile of Cardiometabolic Risk Markers and Decrease Indexes of Beta-Cell Function Independently of Insulin Resistance in Nondiabetic Women with a Parental History of Type 2 Diabetes

    Directory of Open Access Journals (Sweden)

    Alina Sokup

    2014-01-01

    Full Text Available Background. Women with a history of both parental type 2 diabetes (pt2DM and previous gestational diabetes (pGDM represent a group at high risk of cardiovascular events. We hypothesized that pGDM changes cardiometabolic risk markers levels as well as theirs associations with glucose indices in nondiabetic pt2DM women. Methods. Anthropometric parameters, glucose regulation (OGTT, insulin resistance (HOMA-IR, beta-cell function, lipid levels, parameters of endothelial dysfunction, and inflammation were evaluated in 55 women with pt2DM, 40 with both pt2DM and pGDM 2–24 months postpartum, and 35 controls. Results. Prediabetes was diagnosed more frequently in women with both pt2DM and pGDM in comparison with women with only pt2DM (10 versus 8, P=0.04. The pGDM group had higher LDL-cholesterol, sICAM-1, tPa Ag, fibrinogen, and lower beta-cell function after adjustment for HOMA-IR, in comparison with pt2DM group. In pt2DM group postchallenge glucose correlated independently with hsCRP and in pGDM group fasting glucose with HOMA-IR. Conclusions. pGDM exerts a combined effect on cardiometabolic risk markers in women with pt2DM. In these women higher LDL-cholesterol, fibrinogen, sICAM-1, tPa Ag levels and decreased beta cell function are associated with pGDM independently of HOMA-IR index value. Fasting glucose is an important cardiometabolic risk marker and is independently associated with HOMA-IR.

  15. Central Bank independence

    Directory of Open Access Journals (Sweden)

    Vasile DEDU

    2012-08-01

    Full Text Available In this paper we present the key aspects regarding central bank’s independence. Most economists consider that the factor which positively influences the efficiency of monetary policy measures is the high independence of the central bank. We determined that the National Bank of Romania (NBR has a high degree of independence. NBR has both goal and instrument independence. We also consider that the hike of NBR’s independence played an important role in the significant disinflation process, as headline inflation dropped inside the targeted band of 3% ± 1 percentage point recently.

  16. The JET neutron emission profile monitor

    International Nuclear Information System (INIS)

    Adams, J.M.; Syme, D.B.; Watkins, N.; Jarvis, O.N.; Sadler, G.J.

    1993-01-01

    This paper provides a technical description of the neutron emission profile monitor as used routinely at the Joint European Torus (JET), and includes representative examples of its operational capabilities. The primary function of this instrument is to measure the neutron emission as a function of both position and time in a poloidal (vertical along major radius) section through the torus. For the first time the spatially localised effects of sawteeth (magnetic relaxation phenomena) have been observed using a neutron diagnostic. The total (global) neutron emission can be obtained from the profile monitor data by performing a volume integral over the plasma; the absolute neutron emission rates agree with those obtained from the JET time-resolved neutron monitor to within ±15%. This was the first such instrument routinely in use on any tokamak. It provides unique data which are independent of all other diagnostic measurements. (orig.)

  17. Organizing Independent Student Work

    Directory of Open Access Journals (Sweden)

    Zhadyra T. Zhumasheva

    2015-03-01

    Full Text Available This article addresses issues in organizing independent student work. The author defines the term “independence”, discusses the concepts of independent learner work and independent learner work under the guidance of an instructor, proposes a classification of assignments to be done independently, and provides methodological recommendations as to the organization of independent student work. The article discusses the need for turning the student from a passive consumer of knowledge into an active creator of it, capable of formulating a problem, analyzing the ways of solving it, coming up with an optimum outcome, and proving its correctness. The preparation of highly qualified human resources is the primary condition for boosting Kazakhstan’s competitiveness. Independent student work is a means of fostering the professional competence of future specialists. The primary form of self-education is independent work.

  18. Synthesis of national risk profile

    Science.gov (United States)

    1979-01-01

    The methodology used and results obtained in computing the national risk profile for carbon fibers (CF) released after an aircraft accident (fire or explosion) are presented. The computation was performed by use of twenty-six individual conditional risk profiles, together with the extrapolation of these profiles to other U.S. airports. The risk profile was obtained using 1993 CF utilization forecasts, but numbers of facilities were taken from 1972 and 1975 census data, while losses were expressed in 1977 dollars.

  19. Accounting for Independent Schools.

    Science.gov (United States)

    Sonenstein, Burton

    The diversity of independent schools in size, function, and mode of operation has resulted in a considerable variety of accounting principles and practices. This lack of uniformity has tended to make understanding, evaluation, and comparison of independent schools' financial statements a difficult and sometimes impossible task. This manual has…

  20. Optimized Estimation of Surface Layer Characteristics from Profiling Measurements

    Directory of Open Access Journals (Sweden)

    Doreene Kang

    2016-01-01

    Full Text Available New sampling techniques such as tethered-balloon-based measurements or small unmanned aerial vehicles are capable of providing multiple profiles of the Marine Atmospheric Surface Layer (MASL in a short time period. It is desirable to obtain surface fluxes from these measurements, especially when direct flux measurements are difficult to obtain. The profiling data is different from the traditional mean profiles obtained at two or more fixed levels in the surface layer from which surface fluxes of momentum, sensible heat, and latent heat are derived based on Monin-Obukhov Similarity Theory (MOST. This research develops an improved method to derive surface fluxes and the corresponding MASL mean profiles of wind, temperature, and humidity with a least-squares optimization method using the profiling measurements. This approach allows the use of all available independent data. We use a weighted cost function based on the framework of MOST with the cost being optimized using a quasi-Newton method. This approach was applied to seven sets of data collected from the Monterey Bay. The derived fluxes and mean profiles show reasonable results. An empirical bias analysis is conducted using 1000 synthetic datasets to evaluate the robustness of the method.

  1. Probabilistic conditional independence structures

    CERN Document Server

    Studeny, Milan

    2005-01-01

    Probabilistic Conditional Independence Structures provides the mathematical description of probabilistic conditional independence structures; the author uses non-graphical methods of their description, and takes an algebraic approach.The monograph presents the methods of structural imsets and supermodular functions, and deals with independence implication and equivalence of structural imsets.Motivation, mathematical foundations and areas of application are included, and a rough overview of graphical methods is also given.In particular, the author has been careful to use suitable terminology, and presents the work so that it will be understood by both statisticians, and by researchers in artificial intelligence.The necessary elementary mathematical notions are recalled in an appendix.

  2. Accounting for Non-Gaussian Sources of Spatial Correlation in Parametric Functional Magnetic Resonance Imaging Paradigms II: A Method to Obtain First-Level Analysis Residuals with Uniform and Gaussian Spatial Autocorrelation Function and Independent and Identically Distributed Time-Series.

    Science.gov (United States)

    Gopinath, Kaundinya; Krishnamurthy, Venkatagiri; Lacey, Simon; Sathian, K

    2018-02-01

    In a recent study Eklund et al. have shown that cluster-wise family-wise error (FWE) rate-corrected inferences made in parametric statistical method-based functional magnetic resonance imaging (fMRI) studies over the past couple of decades may have been invalid, particularly for cluster defining thresholds less stringent than p functions (sACFs) of fMRI data had been modeled incorrectly to follow a Gaussian form, whereas empirical data suggest otherwise. Hence, the residuals from general linear model (GLM)-based fMRI activation estimates in these studies may not have possessed a homogenously Gaussian sACF. Here we propose a method based on the assumption that heterogeneity and non-Gaussianity of the sACF of the first-level GLM analysis residuals, as well as temporal autocorrelations in the first-level voxel residual time-series, are caused by unmodeled MRI signal from neuronal and physiological processes as well as motion and other artifacts, which can be approximated by appropriate decompositions of the first-level residuals with principal component analysis (PCA), and removed. We show that application of this method yields GLM residuals with significantly reduced spatial correlation, nearly Gaussian sACF and uniform spatial smoothness across the brain, thereby allowing valid cluster-based FWE-corrected inferences based on assumption of Gaussian spatial noise. We further show that application of this method renders the voxel time-series of first-level GLM residuals independent, and identically distributed across time (which is a necessary condition for appropriate voxel-level GLM inference), without having to fit ad hoc stochastic colored noise models. Furthermore, the detection power of individual subject brain activation analysis is enhanced. This method will be especially useful for case studies, which rely on first-level GLM analysis inferences.

  3. A definition of background independence

    International Nuclear Information System (INIS)

    Gryb, Sean

    2010-01-01

    We propose a definition for background (in)/dependence in dynamical theories of the evolution of configurations that have a continuous symmetry and test this definition on particle models and on gravity. Our definition draws from Barbour's best matching framework developed for the purpose of implementing spatial and temporal relationalism. Among other interesting theories, general relativity can be derived within this framework in novel ways. We study the detailed canonical structure of a wide range of best matching theories and show that their actions must have a local gauge symmetry. When gauge theory is derived in this way, we obtain at the same time a conceptual framework for distinguishing between background-dependent and -independent theories. Gauge invariant observables satisfying Kuchar's criterion are identified and, in simple cases, explicitly computed. We propose a procedure for inserting a global background time into temporally relational theories. Interestingly, using this procedure in general relativity leads to unimodular gravity.

  4. Data Profiling

    OpenAIRE

    Hladíková, Radka

    2010-01-01

    Title: Data Profiling Author: Radka Hladíková Department: Department of Software Engineering Supervisor: Ing. Vladimír Kyjonka Supervisor's e-mail address: Abstract: This thesis puts mind on problems with data quality and data profiling. This Work analyses and summarizes problems of data quality, data defects, process of data quality, data quality assessment and data profiling. The main topic is data profiling as a process of researching data available in existing...

  5. Independent technical review, handbook

    International Nuclear Information System (INIS)

    1994-02-01

    Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project

  6. Independent technical review, handbook

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project.

  7. Karolinske psychodynamic profile (KAPP)

    DEFF Research Database (Denmark)

    Mathiesen, Birgit Bork; Søgaard, Ulf

    2006-01-01

    psykologiske testmetoder, assesment, Karolinska psychodynamic profile (KAPP), psykodynamisk profil......psykologiske testmetoder, assesment, Karolinska psychodynamic profile (KAPP), psykodynamisk profil...

  8. Survey of independent inventors: An overview

    Energy Technology Data Exchange (ETDEWEB)

    Whalley, P.

    1992-12-01

    Independent inventors are important but little-researched members of the US technical community. The survey reported on here is the first in modern times to attempt to provide a profile of the US independent inventor that goes beyond a single geographical or organizational locale. The report that follows provides an overview of the demographics, practices and concerns of the modern US inventor as represented by the members of leading US inventor organizations. It is by no means comprehensive but seeks to be indicative of the issues raised in the survey each which will be dealt with more comprehensively in future publications.

  9. Model-Independent Diffs

    DEFF Research Database (Denmark)

    Könemann, Patrick

    just contain a list of strings, one for each line, whereas the structure of models is defined by their meta models. There are tools available which are able to compute the diff between two models, e.g. RSA or EMF Compare. However, their diff is not model-independent, i.e. it refers to the models...

  10. All Those Independent Variables.

    Science.gov (United States)

    Meacham, Merle L.

    This paper presents a case study of a sixth grade remedial math class which illustrates the thesis that only the "experimental attitude," not the "experimental method," is appropriate in the classroom. The thesis is based on the fact that too many independent variables exist in a classroom situation to allow precise measurement. The case study…

  11. Bayesian Independent Component Analysis

    DEFF Research Database (Denmark)

    Winther, Ole; Petersen, Kaare Brandt

    2007-01-01

    In this paper we present an empirical Bayesian framework for independent component analysis. The framework provides estimates of the sources, the mixing matrix and the noise parameters, and is flexible with respect to choice of source prior and the number of sources and sensors. Inside the engine...

  12. Independent safety organization

    International Nuclear Information System (INIS)

    Kato, W.Y.; Weinstock, E.V.; Carew, J.F.; Cerbone, R.J.; Guppy, J.G.; Hall, R.E.; Taylor, J.H.

    1985-01-01

    Brookhaven National Laboratory has conducted a study on the need and feasibility of an independent organization to investigate significant safety events for the Office for Analysis and Evaluation of Operational Data, USNRC. The study consists of three parts: the need for an independent organization to investigate significant safety events, alternative organizations to conduct investigations, and legislative requirements. The determination of need was investigated by reviewing current NRC investigation practices, comparing aviation and nuclear industry practices, and interviewing a spectrum of representatives from the nuclear industry, the regulatory agency, and the public sector. The advantages and disadvantages of alternative independent organizations were studied, namely, an Office of Nuclear Safety headed by a director reporting to the Executive Director for Operations (EDO) of NRC; an Office of Nuclear Safety headed by a director reporting to the NRC Commissioners; a multi-member NTSB-type Nuclear Safety Board independent of the NRC. The costs associated with operating a Nuclear Safety Board were also included in the study. The legislative requirements, both new authority and changes to the existing NRC legislative authority, were studied. 134 references

  13. Study of grid independence of finite element method on MHD free convective casson fluid flow with slip effect

    Science.gov (United States)

    Raju, R. Srinivasa; Ramesh, K.

    2018-05-01

    The purpose of this work is to study the grid independence of finite element method on MHD Casson fluid flow past a vertically inclined plate filled in a porous medium in presence of chemical reaction, heat absorption, an external magnetic field and slip effect has been investigated. For this study of grid independence, a mathematical model is developed and analyzed by using appropriate mathematical technique, called finite element method. Grid study discussed with the help of numerical values of velocity, temperature and concentration profiles in tabular form. avourable comparisons with previously published work on various special cases of the problem are obtained.

  14. Merged ozone profiles from four MIPAS processors

    Science.gov (United States)

    Laeng, Alexandra; von Clarmann, Thomas; Stiller, Gabriele; Dinelli, Bianca Maria; Dudhia, Anu; Raspollini, Piera; Glatthor, Norbert; Grabowski, Udo; Sofieva, Viktoria; Froidevaux, Lucien; Walker, Kaley A.; Zehner, Claus

    2017-04-01

    The Michelson Interferometer for Passive Atmospheric Sounding (MIPAS) was an infrared (IR) limb emission spectrometer on the Envisat platform. Currently, there are four MIPAS ozone data products, including the operational Level-2 ozone product processed at ESA, with the scientific prototype processor being operated at IFAC Florence, and three independent research products developed by the Istituto di Fisica Applicata Nello Carrara (ISAC-CNR)/University of Bologna, Oxford University, and the Karlsruhe Institute of Technology-Institute of Meteorology and Climate Research/Instituto de Astrofísica de Andalucía (KIT-IMK/IAA). Here we present a dataset of ozone vertical profiles obtained by merging ozone retrievals from four independent Level-2 MIPAS processors. We also discuss the advantages and the shortcomings of this merged product. As the four processors retrieve ozone in different parts of the spectra (microwindows), the source measurements can be considered as nearly independent with respect to measurement noise. Hence, the information content of the merged product is greater and the precision is better than those of any parent (source) dataset. The merging is performed on a profile per profile basis. Parent ozone profiles are weighted based on the corresponding error covariance matrices; the error correlations between different profile levels are taken into account. The intercorrelations between the processors' errors are evaluated statistically and are used in the merging. The height range of the merged product is 20-55 km, and error covariance matrices are provided as diagnostics. Validation of the merged dataset is performed by comparison with ozone profiles from ACE-FTS (Atmospheric Chemistry Experiment-Fourier Transform Spectrometer) and MLS (Microwave Limb Sounder). Even though the merging is not supposed to remove the biases of the parent datasets, around the ozone volume mixing ratio peak the merged product is found to have a smaller (up to 0.1 ppmv

  15. Quantum independent increment processes

    CERN Document Server

    Franz, Uwe

    2005-01-01

    This volume is the first of two volumes containing the revised and completed notes lectures given at the school "Quantum Independent Increment Processes: Structure and Applications to Physics". This school was held at the Alfried-Krupp-Wissenschaftskolleg in Greifswald during the period March 9 – 22, 2003, and supported by the Volkswagen Foundation. The school gave an introduction to current research on quantum independent increment processes aimed at graduate students and non-specialists working in classical and quantum probability, operator algebras, and mathematical physics. The present first volume contains the following lectures: "Lévy Processes in Euclidean Spaces and Groups" by David Applebaum, "Locally Compact Quantum Groups" by Johan Kustermans, "Quantum Stochastic Analysis" by J. Martin Lindsay, and "Dilations, Cocycles and Product Systems" by B.V. Rajarama Bhat.

  16. Quantum independent increment processes

    CERN Document Server

    Franz, Uwe

    2006-01-01

    This is the second of two volumes containing the revised and completed notes of lectures given at the school "Quantum Independent Increment Processes: Structure and Applications to Physics". This school was held at the Alfried-Krupp-Wissenschaftskolleg in Greifswald in March, 2003, and supported by the Volkswagen Foundation. The school gave an introduction to current research on quantum independent increment processes aimed at graduate students and non-specialists working in classical and quantum probability, operator algebras, and mathematical physics. The present second volume contains the following lectures: "Random Walks on Finite Quantum Groups" by Uwe Franz and Rolf Gohm, "Quantum Markov Processes and Applications in Physics" by Burkhard Kümmerer, Classical and Free Infinite Divisibility and Lévy Processes" by Ole E. Barndorff-Nielsen, Steen Thorbjornsen, and "Lévy Processes on Quantum Groups and Dual Groups" by Uwe Franz.

  17. Independent random sampling methods

    CERN Document Server

    Martino, Luca; Míguez, Joaquín

    2018-01-01

    This book systematically addresses the design and analysis of efficient techniques for independent random sampling. Both general-purpose approaches, which can be used to generate samples from arbitrary probability distributions, and tailored techniques, designed to efficiently address common real-world practical problems, are introduced and discussed in detail. In turn, the monograph presents fundamental results and methodologies in the field, elaborating and developing them into the latest techniques. The theory and methods are illustrated with a varied collection of examples, which are discussed in detail in the text and supplemented with ready-to-run computer code. The main problem addressed in the book is how to generate independent random samples from an arbitrary probability distribution with the weakest possible constraints or assumptions in a form suitable for practical implementation. The authors review the fundamental results and methods in the field, address the latest methods, and emphasize the li...

  18. International exploration by independents

    International Nuclear Information System (INIS)

    Bertagne, R.G.

    1991-01-01

    Recent industry trends indicate that the smaller US independents are looking at foreign exploration opportunities as one of the alternatives for growth in the new age of exploration. It is usually accepted that foreign finding costs per barrel are substantially lower than domestic because of the large reserve potential of international plays. To get involved overseas requires, however, an adaptation to different cultural, financial, legal, operational, and political conditions. Generally foreign exploration proceeds at a slower pace than domestic because concessions are granted by the government, or are explored in partnership with the national oil company. First, a mid- to long-term strategy, tailored to the goals and the financial capabilities of the company, must be prepared; it must be followed by an ongoing evaluation of quality prospects in various sedimentary basins, and a careful planning and conduct of the operations. To successfully explore overseas also requires the presence on the team of a minimum number of explorationists and engineers thoroughly familiar with the various exploratory and operational aspects of foreign work, having had a considerable amount of onsite experience in various geographical and climatic environments. Independents that are best suited for foreign expansion are those that have been financially successful domestically, and have a good discovery track record. When properly approached foreign exploration is well within the reach of smaller US independents and presents essentially no greater risk than domestic exploration; the reward, however, can be much larger and can catapult the company into the big leagues

  19. International exploration by independent

    International Nuclear Information System (INIS)

    Bertragne, R.G.

    1992-01-01

    Recent industry trends indicate that the smaller U.S. independents are looking at foreign exploration opportunities as one of the alternatives for growth in the new age of exploration. Foreign finding costs per barrel usually are accepted to be substantially lower than domestic costs because of the large reserve potential of international plays. To get involved in overseas exploration, however, requires the explorationist to adapt to different cultural, financial, legal, operational, and political conditions. Generally, foreign exploration proceeds at a slower pace than domestic exploration because concessions are granted by a country's government, or are explored in partnership with a national oil company. First, the explorationist must prepare a mid- to long-term strategy, tailored to the goals and the financial capabilities of the company; next, is an ongoing evaluation of quality prospects in various sedimentary basins, and careful planning and conduct of the operations. To successfully explore overseas also requires the presence of a minimum number of explorationists and engineers thoroughly familiar with the various exploratory and operational aspects of foreign work. Ideally, these team members will have had a considerable amount of on-site experience in various countries and climates. Independents best suited for foreign expansion are those who have been financially successful in domestic exploration. When properly approached, foreign exploration is well within the reach of smaller U.S. independents, and presents essentially no greater risk than domestic exploration; however, the reward can be much larger and can catapult the company into the 'big leagues.'

  20. Agent independent task planning

    Science.gov (United States)

    Davis, William S.

    1990-01-01

    Agent-Independent Planning is a technique that allows the construction of activity plans without regard to the agent that will perform them. Once generated, a plan is then validated and translated into instructions for a particular agent, whether a robot, crewmember, or software-based control system. Because Space Station Freedom (SSF) is planned for orbital operations for approximately thirty years, it will almost certainly experience numerous enhancements and upgrades, including upgrades in robotic manipulators. Agent-Independent Planning provides the capability to construct plans for SSF operations, independent of specific robotic systems, by combining techniques of object oriented modeling, nonlinear planning and temporal logic. Since a plan is validated using the physical and functional models of a particular agent, new robotic systems can be developed and integrated with existing operations in a robust manner. This technique also provides the capability to generate plans for crewmembers with varying skill levels, and later apply these same plans to more sophisticated robotic manipulators made available by evolutions in technology.

  1. International exploration by independents

    International Nuclear Information System (INIS)

    Bertagne, R.G.

    1992-01-01

    Recent industry trends indicate that the smaller U.S. independents are looking at foreign exploration opportunities as one of the alternatives for growth in the new age of exploration. The problems of communications and logistics caused by different cultures and by geographic distances must be carefully evaluated. A mid-term to long-term strategy tailored to the goals and the financial capabilities of the company should be prepared and followed by a careful planning of the operations. This paper addresses some aspects of foreign exploration that should be considered before an independent venture into the foreign field. It also provides some guidelines for conducting successful overseas operations. When properly assessed, foreign exploration is well within the reach of smaller U.S. independents and presents no greater risk than domestic exploration; the rewards, however, can be much larger. Furthermore, the Oil and Gas Journal surveys of the 300 largest U.S. petroleum companies show that companies with a consistent foreign exploration policy have fared better financially during difficult times

  2. Experimental results obtained at GANIL

    International Nuclear Information System (INIS)

    Borrel, V.

    1993-01-01

    A review of experimental results obtained at GANIL on the study of nuclear structure and nuclear reactions with secondary radioactive beams is presented. Mass measurements by means of the GANIL cyclotrons are described. The possibilities of GANIL/LISE3 for the production and separation of radioactive beams are illustrated through a large variety of experiments. (author). 19 refs., 8 figs

  3. Independence in appearance

    DEFF Research Database (Denmark)

    Warming-Rasmussen, Bent; Quick, Reiner; Liempd, Dennis van

    2011-01-01

    In the wake of the financial crisis, the EU Commission has published a Green Paper on the future role of the audit function in Europe. The Green Paper lists a number of proposals for tighter rules for audits and auditors in order to contribute to stabilizing the financial system. The present...... article presents research contributions to the question whether the auditor is to continue to provide both audit and non-audit services (NAS) to an audit client. Research results show that this double function for the same audit client is a problem for stakeholders' confidence in auditor independence...

  4. Geopolymer obtained from coal ash

    International Nuclear Information System (INIS)

    Conte, V.; Bissari, E.S.; Uggioni, E.; Bernardin, A.M.

    2011-01-01

    Geopolymers are three-dimensional alumino silicates that can be rapidly formed at low temperature from naturally occurring aluminosilicates with a structure similar to zeolites. In this work coal ash (Tractebel Energy) was used as source of aluminosilicate according a full factorial design in eight formulations with three factors (hydroxide type and concentration and temperature) and two-levels. The ash was dried and hydroxide was added according type and concentration. The geopolymer was poured into cylindrical molds, cured (14 days) and subjected to compression test. The coal ash from power plants belongs to the Si-Al system and thus can easily form geopolymers. The compression tests showed that it is possible to obtain samples with strength comparable to conventional Portland cement. As a result, temperature and molarity are the main factors affecting the compressive strength of the obtained geopolymer. (author)

  5. Truncated States Obtained by Iteration

    International Nuclear Information System (INIS)

    Cardoso, W. B.; Almeida, N. G. de

    2008-01-01

    We introduce the concept of truncated states obtained via iterative processes (TSI) and study its statistical features, making an analogy with dynamical systems theory (DST). As a specific example, we have studied TSI for the doubling and the logistic functions, which are standard functions in studying chaos. TSI for both the doubling and logistic functions exhibit certain similar patterns when their statistical features are compared from the point of view of DST

  6. Salmonella Typhimurium transcription profiles in space flight

    Data.gov (United States)

    National Aeronautics and Space Administration — Salmonella transcription profiles were obtained from samples flown on space shuttle mission STS-115 and compared to profiles from Salmonella grown under identical...

  7. Program analysis and presentation of results of the profiles and depth dose rates obtained with the PTW software MC{sub 2} MEPHYSTO; Programa de analisis y presentacion de resultados de los perfiles y porcentajes de dosis en profundidad adquiridos con el software MEPHYSTO MC2 de PTW

    Energy Technology Data Exchange (ETDEWEB)

    Tato de la Cuevas, F.

    2011-07-01

    In the periodic quality control of linear accelerators is usually included acquisition and analysis of profiles and PDDs (percentage depth dose). In the protocol of Quality Control of electron accelerators for clinical use of the proposed analysis SEFM 4 Profiles for each of the energies used clinically. This involves a large number of curves to be analyzed and the subsequent introduction of the parameters in a spreadsheet or similar for your assessment as to the reference state. We have developed a program that analyzes the curves acquired by mcc Mephysto PTW software and presents the results of that analysis in a spreadsheet.

  8. The importance of board independence

    NARCIS (Netherlands)

    Zijl, N.J.M.

    2012-01-01

    Although the attributed importance of board independence is high, a clear definition of independence does not exist. Furthermore, the aim and consequences of independence are the subject of discussion and empirical evidence about the impact of independence is weak and disputable. Despite this lack

  9. Profiling cancer

    DEFF Research Database (Denmark)

    Ciro, Marco; Bracken, Adrian P; Helin, Kristian

    2003-01-01

    In the past couple of years, several very exciting studies have demonstrated the enormous power of gene-expression profiling for cancer classification and prediction of patient survival. In addition to promising a more accurate classification of cancer and therefore better treatment of patients......, gene-expression profiling can result in the identification of novel potential targets for cancer therapy and a better understanding of the molecular mechanisms leading to cancer....

  10. A formalism for independent checking of Gamma Knife dose calculations

    International Nuclear Information System (INIS)

    Tsai Jensan; Engler, Mark J.; Rivard, Mark J.; Mahajan, Anita; Borden, Jonathan A.; Zheng Zhen

    2001-01-01

    For stereotactic radiosurgery using the Leksell Gamma Knife system, it is important to perform a pre-treatment verification of the maximum dose calculated with the Leksell GammaPlan[reg] (D LGP ) stereotactic radiosurgery system. This verification can be incorporated as part of a routine quality assurance (QA) procedure to minimize the chance of a hazardous overdose. To implement this procedure, a formalism has been developed to calculate the dose D CAL (X,Y,Z,d av ,t) using the following parameters: average target depth (d av ), coordinates (X,Y,Z) of the maximum dose location or any other dose point(s) to be verified, 3-dimensional (3-dim) beam profiles or off-center-ratios (OCR) of the four helmets, helmet size i, output factor O i , plug factor P i , each shot j coordinates (x,y,z) i,j , and shot treatment time (t i,j ). The average depth of the target d av was obtained either from MRI/CT images or ruler measurements of the Gamma Knife Bubble Head Frame. D CAL and D LGP were then compared to evaluate the accuracy of this independent calculation. The proposed calculation for an independent check of D LGP has been demonstrated to be accurate and reliable, and thus serves as a QA tool for Gamma Knife stereotactic radiosurgery

  11. Obtaining zircaloy powder through hydriding

    International Nuclear Information System (INIS)

    Dupim, Ivaldete da Silva; Moreira, Joao M.L.

    2009-01-01

    Zirconium alloys are good options for the metal matrix in dispersion fuels for power reactors due to their low thermal neutron absorption cross-section, good corrosion resistance, good mechanical strength and high thermal conductivity. A necessary step for obtaining such fuels is producing Zr alloy powder for the metal matrix composite material. This article presents results from the Zircaloy-4 hydrogenation tests with the purpose to embrittle the alloy as a first step for comminuting. Several hydrogenation tests were performed and studied through thermogravimetric analysis. They included H 2 pressures of 25 and 50 kPa and temperatures ranging between from 20 to 670 deg C. X-ray diffraction analysis showed in the hydrogenated samples the predominant presence of ZrH 2 and some ZrO 2 . Some kinetics parameters for the Zircaloy-4 hydrogenation reaction were obtained: the time required to reach the equilibrium state at the dwell temperature was about 100 minutes; the hydrogenation rate during the heating process from 20 to 670 deg C was about 21 mg/h, and at constant temperature of 670 deg C, the hydride rate was about 1.15 mg/h. The hydrogenation rate is largest during the heating process and most of it occurs during this period. After hydrogenated, the samples could easily be comminuted indicating that this is a possible technology to obtain Zircaloy powder. The results show that only few minutes of hydrogenation are necessary to reach the hydride levels required for comminuting the Zircaloy. The final hydride stoichiometry was between 2.7 and 2.8 H for each Zr atom in the sample (author)

  12. Autonomy, Independence, Inclusion

    Directory of Open Access Journals (Sweden)

    Filippo Angelucci

    2015-04-01

    Full Text Available The living environment must not only meet the primary needs of living, but also the expectations of improvement of life and social relations and people’s work. The need for a living environment that responds to the needs of users with their different abilities, outside of standardizations, is increasingly felt as autonomy, independence and well-being are the result of real usability and adaptability of the spaces. The project to improve the inclusivity of living space and to promote the rehabilitation of fragile users need to be characterized as an interdisciplinary process in which the integration of specialized contributions leads to adaptive customization of space solutions and technological that evolve with the changing needs, functional capacities and abilities of individuals.

  13. Antimicrobial resistance profile of Staphylococcus aureus isolates obtained from skin and soft tissue infections of outpatients from a university hospital in Recife -PE, Brazil Perfil de resistência antimicrobiana de isolados de Staphylococcus aureus provenientes de infecções de pele e tecidos moles de pacientes ambulatoriais de um hospital universitário em Recife - PE, Brasil

    Directory of Open Access Journals (Sweden)

    Fabiana Beserra Caraciolo

    2012-12-01

    Full Text Available BACKGROUND: Staphylococcus aureus has a notable ability to acquire resistance to antibiotics, and methicillin resistance represents a growing public health problem. Methicillin-resistant S. aureus (MRSA has also become important outside the hospital environment, particularly in the United States. In Brazil, since 2005, cases of community skin infections caused by MRSA have been reported, but resistance studies involving outpatients are scarce. OBJECTIVE: To know the resistance profile of S. aureus involved in skin and soft tissue infections of patients seen at the Dermatology outpatient clinic of a university hospital in Recife, Pernambuco State, northeastern Brazil. METHODS: Prospective study involving 30 patients with skin and soft tissue infections, seen at the Dermatology outpatient clinic from May until November 2011. To evaluate the susceptibility of S. aureus to antibiotics, the disk diffusion method and oxacillin screening agar were used. RESULTS: From a total of 30 samples of skin lesions, 19 (63% had positive culture for S. aureus. The following resistance patterns of S. aureus were observed: penicillin, 95%; tetracycline, 32%; erythromycin, 21%; gentamicin, 16%; cefoxitin, 11%; oxacillin, 11%; trimethoprim-sulfamethoxazole, 11%; chloramphenicol, 11%; clindamycin, 5% ; and ciprofloxacin, 0%. One of the identified MRSA was obtained from a patient without risk factors for its acquisition, and was resistant, beyond to the beta-lactams, only to tetracycline. CONCLUSIONS: With regard to the resistance patterns of S. aureus, resistances to tetracycline, erythromycin and gentamicin were the highest. It was documented, for the first time in Pernambuco, a case of skin infection caused by community-associated MRSA.FUNDAMENTOS: O Staphylococcus aureus possui uma notável habilidade de adquirir resistência antimicrobiana, sendo a resistência à meticilina um problema de saúde pública crescente. O S. aureus resistente à meticilina (MRSA vem se

  14. Lessons from independence

    International Nuclear Information System (INIS)

    Hauptfuhrer, R.R.

    1990-01-01

    The recent history of Oryx provides invaluable lessons for those who plan future energy strategies, relates the author of this paper. When Oryx became an independent oil and gas company, its reserves were declining, its stock was selling below asset values, and the price of oil seemed stuck below $15 per barrel. The message from Oryx management to Oryx employees was: We are in charge of our own destiny. We are about to create our own future. Oryx had developed a new, positive corporate culture and the corporate credit required for growth. This paper points to two basic principles that have guided the metamorphosis in Oryx's performance. The first objective was to improve operational efficiency and to identify the right performance indicators to measure this improvement. It states that the most critical performance indicator for an exploration and production company must be replacement and expansion of reserves at a competitive replacement cost. Oryx has cut its finding costs from $12 to $5 per barrel, while the BP acquisition provided proven reserves at a cost of only $4 per barrel. Another performance indicator measures Oryx's standing in the financial markets

  15. Independents' group posts loss

    International Nuclear Information System (INIS)

    Sanders, V.; Price, R.B.

    1992-01-01

    Low oil gas prices and special charges caused the group of 50 U.S. independent producers Oil and Gas Journal tracks to post a combined loss in first half 1992. The group logged a net loss of $53 million in the first half compared with net earnings of $354 million in first half 1991, when higher oil prices during the Persian Gulf crisis buoyed earnings in spite of crude oil and natural gas production declines. The combined loss in the first half follows a 45% drop in the group's earnings in 1991 and compares with the OGJ group of integrated oil companies whose first half 1992 income fell 47% from the prior year. Special charges, generally related to asset writedowns, accounted for most of the almost $560 million in losses posted by about the third of the group. Nerco Oil and Gas Inc., Vancouver, Wash., alone accounted for almost half that total with charges related to an asset writedown of $238 million in the first quarter. Despite the poor first half performance, the outlook is bright for sharply improved group earnings in the second half, assuming reasonably healthy oil and gas prices and increased production resulting from acquisitions and in response to those prices

  16. PPARγ-Independent Mechanism

    Directory of Open Access Journals (Sweden)

    Christopher M. Hogan

    2011-01-01

    Full Text Available Acute and chronic lung inflammation is associated with numerous important disease pathologies including asthma, chronic obstructive pulmonary disease and silicosis. Lung fibroblasts are a novel and important target of anti-inflammatory therapy, as they orchestrate, respond to, and amplify inflammatory cascades and are the key cell in the pathogenesis of lung fibrosis. Peroxisome proliferator-activated receptor gamma (PPARγ ligands are small molecules that induce anti-inflammatory responses in a variety of tissues. Here, we report for the first time that PPARγ ligands have potent anti-inflammatory effects on human lung fibroblasts. 2-cyano-3, 12-dioxoolean-1, 9-dien-28-oic acid (CDDO and 15-deoxy-Δ12,14-prostaglandin J2 (15d-PGJ2 inhibit production of the inflammatory mediators interleukin-6 (IL-6, monocyte chemoattractant protein-1 (MCP-1, COX-2, and prostaglandin (PGE2 in primary human lung fibroblasts stimulated with either IL-1β or silica. The anti-inflammatory properties of these molecules are not blocked by the PPARγ antagonist GW9662 and thus are largely PPARγ independent. However, they are dependent on the presence of an electrophilic carbon. CDDO and 15d-PGJ2, but not rosiglitazone, inhibited NF-κB activity. These results demonstrate that CDDO and 15d-PGJ2 are potent attenuators of proinflammatory responses in lung fibroblasts and suggest that these molecules should be explored as the basis for novel, targeted anti-inflammatory therapies in the lung and other organs.

  17. Commonwealth of (Independent States

    Directory of Open Access Journals (Sweden)

    Vrućinić Dušan

    2013-01-01

    Full Text Available Following the stages from the establishment itself to the present day of the functioning of such a specific regional organization as the Commonwealth of Independent States (CIS, the article seeks to further explain the meaning of its existence, efficiency and functioning. The CIS was created in order to make the dissolution of a major world super-power, which throughout the 20th century together with the USA defined the bipolar world, as painless as possible, especially for the new countries and its nationally and ethnically diverse population. During the early years after the dissolution of the USSR, the CIS played a major role in a more flexible and less severe dissolution of the Soviet empire, alleviating the consequences for its people. A more efficient functioning among the republics in all fields was also one of the tasks of the Commonwealth, to which it was devoted to the extent which was permitted by the then, not too favourable circumstances. Difficult years of economic crisis did not allow the CIS to mutually integrate its members as much as possible on the economy level. Thanks to the economic recovery of the post-Soviet states in the early 21st century, the Commonwealth has also been transformed, reformed, and renewed, and all this in order to achieve better and more fruitful cooperation between the members. The CIS may serve as a proper example of how the former Soviet Union states are inextricably linked by social, security-political, economic, cultural, communication-transport, and other ties, thanks to the centuries-long existence of the peoples of these states in this area, despite both internal and external factors which occasionally, but temporarily halt the post-Soviet integration. Mathematically expressed, the CIS members are naturally predisposed, to be reciprocally depended on each other, just as they also have the capacity for successful cooperation in the future times and epochs brought on by the modern world.

  18. Drugs obtained by biotechnology processing

    Directory of Open Access Journals (Sweden)

    Hugo Almeida

    2011-06-01

    Full Text Available In recent years, the number of drugs of biotechnological origin available for many different diseases has increased exponentially, including different types of cancer, diabetes mellitus, infectious diseases (e.g. AIDS Virus / HIV as well as cardiovascular, neurological, respiratory, and autoimmune diseases, among others. The pharmaceutical industry has used different technologies to obtain new and promising active ingredients, as exemplified by the fermentation technique, recombinant DNA technique and the hybridoma technique. The expiry of the patents of the first drugs of biotechnological origin and the consequent emergence of biosimilar products, have posed various questions to health authorities worldwide regarding the definition, framework, and requirements for authorization to market such products.Nos últimos anos, tem aumentado exponencialmente o número de fármacos de origem biotecnológica ao dispor das mais diversas patologias, entre elas destacam-se, os diferentes tipos de cancêr, as doenças infecciosas (ex. vírus AIDS/HIV, as doenças autoimunes, as doenças cardiovasculares, a Diabetes Mellitus, as doenças neurológicas, as doenças respiratórias, entre outras. A indústria farmacêutica tem recorrido a diferentes tecnologias para a obtenção de novos e promissores princípios ativos, como são exemplo a fermentação, a técnica de DNA Recombinante, a técnica de hidridoma, entre outras. A queda das patentes dos primeiros fármacos de origem biotecnológica e o consequente aparecimento dos produtos biossimilares têm colocado diferentes questões às autoridades de saúde mundiais, sobre a definição, enquadramento e exigências para a autorização de entrada no mercado deste tipo de produtos.

  19. Media independence and dividend policy

    DEFF Research Database (Denmark)

    Farooq, Omar; Dandoune, Salma

    2012-01-01

    independence and dividend policies in emerging markets. Using a dataset from twenty three emerging markets, we show a significantly negative relationship between dividend policies (payout ratio and decision to pay dividend) and media independence. We argue that independent media reduces information asymmetries...... for stock market participants. Consequently, stock market participants in emerging markets with more independent media do not demand as high and as much dividends as their counterparts in emerging markets with less independent media. We also show that press independence is more important in defining......Can media pressurize managers to disgorge excess cash to shareholders? Do firms in countries with more independent media follow different dividend policies than firms with less independent media? This paper seeks to answer these questions and aims to document the relationship between media...

  20. Heterodyne radiometer for the measurement of the electron temperature profile on TdeV

    International Nuclear Information System (INIS)

    Pinsonneault, D.; Quirion, B.; Hubbard, A.; Glaude, V.; Legros, C.

    1993-01-01

    In the following sections an overview of the basic physical considerations are presented. We then briefly describe the instrument and present the design and construction of the two calibration standards in more detail. We also discuss the calibration procedures using these sources which permit the derivation of T e independent of the other diagnostics. Finally, a comparison of T e (R) profiles obtained with the three measurement system will be presented. (orig.)

  1. Scaling of divertor heat flux profile widths in DIII-D

    International Nuclear Information System (INIS)

    Lasnier, C.J.; Makowski, M.A.; Boedo, J.A.; Allen, S.L.; Brooks, N.H.; Hill, D.N.; Leonard, A.W.; Watkins, J.G.; West, W.P.

    2011-01-01

    New scalings of the dependence of divertor heat flux peak and profile width, important parameters for the design of future large tokamaks, have been obtained from recent DIII-D experiments. We find the peak heat flux depends linearly on input power, decreases linearly with increasing density, and increases linearly with plasma current. The profile width has a weak dependence on input power, is independent of density up to the onset of detachment, and is inversely proportional to the plasma current. We compare these results with previously published scalings, and present mathematical expressions incorporating these results.

  2. Controlling magnetic field profiles

    International Nuclear Information System (INIS)

    Freeman, J.R.

    1979-04-01

    A method for designing solenoid magnets with controlled field profiles is discussed. The method, originated by D.B. Montgomery, minimizes both the field errors and the power consumption. An NOS time-sharing computer program for the CDC-6600, entitled MAGCOR, was constructed to provide an interactive magnet design capability. Results obtained during the design of magnets for a radial line electron accelerator are presented. 9 figures

  3. Technical player profiles related to the physical fitness of young female volleyball players predict team performance.

    Science.gov (United States)

    Dávila-Romero, C; Hernández-Mocholí, M A; García-Hermoso, A

    2015-03-01

    This study is divided into three sequential stages: identification of fitness and game performance profiles (individual player performance), an assessment of the relationship between these profiles, and an assessment of the relationship between individual player profiles and team performance during play (in championship performance). The overall study sample comprised 525 (19 teams) female volleyball players aged 12-16 years and a subsample (N.=43) used to examine study aims one and two was selected from overall sample. Anthropometric, fitness and individual player performance (actual game) data were collected in the subsample. These data were analyzed through clustering methods, ANOVA and independence chi-square test. Then, we investigated whether the proportion of players with the highest individual player performance profile might predict a team's results in the championship. Cluster analysis identified three volleyball fitness profiles (high, medium, and low) and two individual player performance profiles (high and low). The results showed a relationship between both types of profile (fitness and individual player performance). Then, linear regression revealed a moderate relationship between the number of players with a high volleyball fitness profile and a team's results in the championship (R2=0.23). The current study findings may enable coaches and trainers to manage training programs more efficiently in order to obtain tailor-made training, identify volleyball-specific physical fitness training requirements and reach better results during competitions.

  4. Comment on atomic independent-particle models

    International Nuclear Information System (INIS)

    Doda, D.D.; Gravey, R.H.; Green, A.E.S.

    1975-01-01

    The Hartree-Fock-Slater (HFS) independent-particle model in the form developed by Hermann and Skillman (HS) and the Green, Sellin, and Zachor (GSZ) analytic independent-particle model are being used for many types of applications of atomic theory to avoid cumbersome, albeit more rigorous, many-body calculations. The single-electron eigenvalues obtained with these models are examined and it is found that the GSZ model is capable of yielding energy eigenvalues for valence electrons which are substantially closer to experimental values than are the results of HS-HFS calculations. With the aid of an analytic representation of the equivalent HS-HFS screening function, the difficulty with this model is identified as a weakness of the potential in the neighborhood of the valence shell. Accurate representations of valence states are important in most atomic applications of the independent-particle model

  5. Study of dose profile in TC scanning of cranium

    International Nuclear Information System (INIS)

    Goncalves Junior, R.L.; Oliveira, A.H.; Mourao, A.P.

    2011-01-01

    In this paper it was obtained a dose distribution profile in computerized tomography, when a head simulator object, cylindrical and manufactured in PMMA, were swiped by using the clinical protocol or this device routine. The doses were determined with radiochromic films placed at the four cardinal points and the Center, taking as reference one of object faces. The films were calibrated with pencil ionization chamber in a independent experiment where the obtained doses in the chamber, when a unique central cut or the object were obtained, were confronted with the gray scales on the irradiated films in a similar manner, revealing he factors of conversion mGy.Gray tones -1 which made possible the determination of doses in all the scanning

  6. Boards: Independent and Committed Directors?

    OpenAIRE

    Christophe Volonté

    2011-01-01

    Regulators, proxy advisors and shareholders are regularly calling for independent directors. However, at the same time, independent directors commonly engage in numerous outside activities potentially reducing their time and commitment with the particular firm. Using Tobin's Q as an approximation of market valuation and controlling for endogeneity, our empirical analysis reveals that neither is independence positively related to firm performance nor are outside activities negatively related t...

  7. Independent component analysis: recent advances

    OpenAIRE

    Hyv?rinen, Aapo

    2013-01-01

    Independent component analysis is a probabilistic method for learning a linear transform of a random vector. The goal is to find components that are maximally independent and non-Gaussian (non-normal). Its fundamental difference to classical multi-variate statistical methods is in the assumption of non-Gaussianity, which enables the identification of original, underlying components, in contrast to classical methods. The basic theory of independent component analysis was mainly developed in th...

  8. Bibliographic information interchange with data independence

    International Nuclear Information System (INIS)

    Macedo, L.F.P. de

    1980-01-01

    A technique for bibliographic information processing, at the standardized interchange format ISO 2709 or ANSI Z39.2, which allows to obtain programs with data independence is developed. A format definition language and manipulation commands which enable data storage and retrieval at the logical level are specified. With this technique it is possible to implement programs which can accept data from any information system, reducing, therefore, the requirements of a common bibliographic information interchange format. (Author) [pt

  9. Numerical Investigation of Pressure Profile in Hydrodynamic Lubrication Thrust Bearing.

    Science.gov (United States)

    Najar, Farooq Ahmad; Harmain, G A

    2014-01-01

    Reynolds equation is solved using finite difference method (FDM) on the surface of the tilting pad to find the pressure distribution in the lubricant oil film. Different pressure profiles with grid independence are described. The present work evaluates pressure at various locations after performing a thorough grid refinement. In recent similar works, this aspect has not been addressed. However, present study shows that it can have significant effect on the pressure profile. Results of a sector shaped pad are presented and it is shown that the maximum average value of pressure is 12% (approximately) greater than the previous results. Grid independence occurs after 24 × 24 grids. A parameter "ψ" has been proposed to provide convenient indicator of obtaining grid independent results. ψ = |(P refinedgrid - P Refrence-grid)/P refinedgrid|, ψ ≤ ε, where "ε" can be fixed to a convenient value and a constant minimum film thickness value of 75 μm is used in present study. This important parameter is highlighted in the present work; the location of the peak pressure zone in terms of (r, θ) coordinates is getting shifted by changing the grid size which will help the designer and experimentalist to conveniently determine the position of pressure measurement probe.

  10. Numerical Investigation of Pressure Profile in Hydrodynamic Lubrication Thrust Bearing

    Science.gov (United States)

    Najar, Farooq Ahmad; Harmain, G. A.

    2014-01-01

    Reynolds equation is solved using finite difference method (FDM) on the surface of the tilting pad to find the pressure distribution in the lubricant oil film. Different pressure profiles with grid independence are described. The present work evaluates pressure at various locations after performing a thorough grid refinement. In recent similar works, this aspect has not been addressed. However, present study shows that it can have significant effect on the pressure profile. Results of a sector shaped pad are presented and it is shown that the maximum average value of pressure is 12% (approximately) greater than the previous results. Grid independence occurs after 24 × 24 grids. A parameter “ψ” has been proposed to provide convenient indicator of obtaining grid independent results. ψ = |(P refinedgrid − P Refrence-grid)/P refinedgrid|, ψ ≤ ε, where “ε” can be fixed to a convenient value and a constant minimum film thickness value of 75 μm is used in present study. This important parameter is highlighted in the present work; the location of the peak pressure zone in terms of (r, θ) coordinates is getting shifted by changing the grid size which will help the designer and experimentalist to conveniently determine the position of pressure measurement probe. PMID:27350977

  11. On independence in risk communication

    International Nuclear Information System (INIS)

    Lacronique, J. F.

    2006-01-01

    The term 'independence' is a common key word used by almost all stake holders in the field of nuclear safety regulation. The intention is to persuade the public that it can have more confidence and trust in the persons in charge, if their competence and judgment cannot be altered by any kind of political issue or personal interest. However, it is possible to discuss the reality of this claimed quality: how is it possible to verify that the organization that claim 'independence' really respect it? National expertise Institutions can show that they are independent from the industry, but can they claim total independence from the government? NGO have build a large part of their constituency on 'independence' from industry and governments, but are they independent from the ideological forces -sometimes very powerful - that support them? How can we achieve to make this noble word really meaningful? We will show through different examples, that 'independence' is by definition a fragile and versatile challenge, rather than a durable label. It has to be refreshed regularly and thoroughly. Risk communication, in that context, must respect principles which will build independence as a solid asset, and keep a certain distance with mere marketing purposes or candid wishful thinking

  12. Defining and Selecting Independent Directors

    Directory of Open Access Journals (Sweden)

    Eric Pichet

    2017-10-01

    Full Text Available Drawing from the Enlightened Shareholder Theory that the author first developed in 2011, this theoretical paper with practical and normative ambitions achieves a better definition of independent director, while improving the understanding of the roles he fulfils on boards of directors. The first part defines constructs like firms, Governance system and Corporate governance, offering a clear distinction between the latter two concepts before explaining the four main missions of a board. The second part defines the ideal independent director by outlining the objective qualities that are necessary and adding those subjective aspects that have turned this into a veritable profession. The third part defines the ideal process for selecting independent directors, based on nominating committees that should themselves be independent. It also includes ways of assessing directors who are currently in function, as well as modalities for renewing their mandates. The paper’s conclusion presents the Paradox of the Independent Director.

  13. Testing independence of fragment lengths within VNTR loci

    Energy Technology Data Exchange (ETDEWEB)

    Geisser, S. (Univ. of Minnesota, Minneapolis, MN (United States)); Johnson, W. (Univ. of California, Davis, CA (United States))

    1993-11-01

    Methods that were devised to test independence of the bivariate fragment lengths obtained from VNTR loci are applied to several population databases. It is shown that for many of the probes independence (Hardy-Weinberg equilibrium) cannot be sustained. 3 refs., 3 tabs.

  14. Chandra Independently Determines Hubble Constant

    Science.gov (United States)

    2006-08-01

    A critically important number that specifies the expansion rate of the Universe, the so-called Hubble constant, has been independently determined using NASA's Chandra X-ray Observatory. This new value matches recent measurements using other methods and extends their validity to greater distances, thus allowing astronomers to probe earlier epochs in the evolution of the Universe. "The reason this result is so significant is that we need the Hubble constant to tell us the size of the Universe, its age, and how much matter it contains," said Max Bonamente from the University of Alabama in Huntsville and NASA's Marshall Space Flight Center (MSFC) in Huntsville, Ala., lead author on the paper describing the results. "Astronomers absolutely need to trust this number because we use it for countless calculations." Illustration of Sunyaev-Zeldovich Effect Illustration of Sunyaev-Zeldovich Effect The Hubble constant is calculated by measuring the speed at which objects are moving away from us and dividing by their distance. Most of the previous attempts to determine the Hubble constant have involved using a multi-step, or distance ladder, approach in which the distance to nearby galaxies is used as the basis for determining greater distances. The most common approach has been to use a well-studied type of pulsating star known as a Cepheid variable, in conjunction with more distant supernovae to trace distances across the Universe. Scientists using this method and observations from the Hubble Space Telescope were able to measure the Hubble constant to within 10%. However, only independent checks would give them the confidence they desired, considering that much of our understanding of the Universe hangs in the balance. Chandra X-ray Image of MACS J1149.5+223 Chandra X-ray Image of MACS J1149.5+223 By combining X-ray data from Chandra with radio observations of galaxy clusters, the team determined the distances to 38 galaxy clusters ranging from 1.4 billion to 9.3 billion

  15. Halo-independent determination of the unmodulated WIMP signal in DAMA: the isotropic case

    Energy Technology Data Exchange (ETDEWEB)

    Gondolo, Paolo [Department of Physics, University of Utah, 115 South 1400 East #201, Salt Lake City, Utah 84112-0830 (United States); Scopel, Stefano, E-mail: paolo.gondolo@utah.edu, E-mail: scopel@sogang.ac.kr [Department of Physics, Sogang University, Seoul 121-742 (Korea, Republic of)

    2017-09-01

    We present a halo-independent determination of the unmodulated signal corresponding to the DAMA modulation if interpreted as due to dark matter weakly interacting massive particles (WIMPs). First we show how a modulated signal gives information on the WIMP velocity distribution function in the Galactic rest frame from which the unmodulated signal descends. Then we describe a mathematically-sound profile likelihood analysis in which the likelihood is profiled over a continuum of nuisance parameters (namely, the WIMP velocity distribution). As a first application of the method, which is very general and valid for any class of velocity distributions, we restrict the analysis to velocity distributions that are isotropic in the Galactic frame. In this way we obtain halo-independent maximum-likelihood estimates and confidence intervals for the DAMA unmodulated signal. We find that the estimated unmodulated signal is in line with expectations for a WIMP-induced modulation and is compatible with the DAMA background+signal rate. Specifically, for the isotropic case we find that the modulated amplitude ranges between a few percent and about 25% of the unmodulated amplitude, depending on the WIMP mass.

  16. Comparison of ionospheric characteristic parameters obtained by ...

    Indian Academy of Sciences (India)

    GPS TEC values derived from the Crustal Movement Observation Network of China (CMONOC) are compared .... A polynomial function is used to build a regional .... Development and evalua- ... integration of the electron density profile of the.

  17. Degradation effects ad Si-depth profiling in photoresists using ion beam analysis

    International Nuclear Information System (INIS)

    Ijzendoorn, L.J. van; Schellekens, J.P.W.

    1989-01-01

    The reaction of silicon-containing vapour with a photoresist layer, as used in dry developable lithographic processes, was studied with Rutherford backscattering spectrometry (RBS). Degradation of the polymer layer was observed, but the total amount of incorporated Si was found to be constant during the measurement. Si-depth profiles were found to be independent of dose and in agreement with profiles obtained with secondary ion mass spectrometry (SIMS). The detection of hydrogen by elastic recoil detection (ERD) was used to study the degradation in detail. The decrease in hydrogen countrate from a layer of polystyrene on Si in combination with the shift of the Si-substrate edge in the corresponding RBS spectra was used for a model description. Only one degradation cross-section for hydrogen and one for carbon, both independent of beam current and dose, were required for a successful fit of the experimental data. (orig.)

  18. Ukraine [profile

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The disintegration of the former Soviet Union has seen Ukraine pay a heavy price for its much cherished independence. Accustomed to virtually unlimited, and heavily subsidised, oil and gas supplies from Russia, the last three years have represented a very rude awakening for the country. Net material product declined by 3% in 1990, 11% in 1991 and 15-17% in 1992. The main reason for this startling and alarming decline is the fact that Ukraine now has to pay for its energy imports. Given the fact the country imports half of its primary energy requirements, it is no wonder that the Ukrainian economy is in crisis. The situation has been compounded by poor political relations between Ukraine and Russia over issues such as the Black Sea fleet and Ukraine's inability to pay the going rate for oil and gas supplies. (author)

  19. Measurement of whole tire profile

    Science.gov (United States)

    Yang, Yongyue; Jiao, Wenguang

    2010-08-01

    In this paper, a precision measuring device is developed for obtaining characteristic curve of tire profile and its geometric parameters. It consists of a laser displacement measurement unit, a closed-loop precision two-dimensional coordinate table, a step motor control system and a fast data acquisition and analysis system. Based on the laser trigonometry, a data map of tire profile and coordinate values of all points can be obtained through corresponding data transformation. This device has a compact structure, a convenient control, a simple hardware circuit design and a high measurement precision. Experimental results indicate that measurement precision can meet the customer accuracy requirement of +/-0.02 mm.

  20. Natural tracer profiles across argillaceous formations

    International Nuclear Information System (INIS)

    Mazurek, Martin; Alt-Epping, Peter; Bath, Adrian; Gimmi, Thomas; Niklaus Waber, H.; Buschaert, Stephane; Canniere, Pierre De; Craen, Mieke De; Gautschi, Andreas; Savoye, Sebastien; Vinsot, Agnes; Wemaere, Isabelle; Wouters, Laurent

    2011-01-01

    Highlights: → Solute transport processes in clay and shale formations at nine sites are examined. → Conservative pore-water tracers (e.g. Cl - , δ 18 O, δ 2 H, He) show regular profiles. → These indicate the dominance of diffusive transport over times of 10 5 -10 6 years. → The contribution of vertical advection to transport is limited or negligible. → Modelled evolution times are in line with independent palaeo-hydrogeological data. - Abstract: Argillaceous formations generally act as aquitards because of their low hydraulic conductivities. This property, together with the large retention capacity of clays for cationic contaminants, has brought argillaceous formations into focus as potential host rocks for the geological disposal of radioactive and other waste. In several countries, programmes are under way to characterise the detailed transport properties of such formations at depth. In this context, the interpretation of profiles of natural tracers in pore waters across the formations can give valuable information about the large-scale and long-term transport behaviour of these formations. Here, tracer-profile data, obtained by various methods of pore-water extraction for nine sites in central Europe, are compiled. Data at each site comprise some or all of the conservative tracers: anions (Cl - , Br - ), water isotopes (δ 18 O, δ 2 H) and noble gases (mainly He). Based on a careful evaluation of the palaeo-hydrogeological evolution at each site, model scenarios are derived for initial and boundary pore-water compositions and an attempt is made to numerically reproduce the observed tracer distributions in a consistent way for all tracers and sites, using transport parameters derived from laboratory or in situ tests. The comprehensive results from this project have been reported in . Here the results for three sites are presented in detail, but the conclusions are based on model interpretations of the entire data set. In essentially all cases, the

  1. Logical independence and quantum randomness

    International Nuclear Information System (INIS)

    Paterek, T; Kofler, J; Aspelmeyer, M; Zeilinger, A; Brukner, C; Prevedel, R; Klimek, P

    2010-01-01

    We propose a link between logical independence and quantum physics. We demonstrate that quantum systems in the eigenstates of Pauli group operators are capable of encoding mathematical axioms and show that Pauli group quantum measurements are capable of revealing whether or not a given proposition is logically dependent on the axiomatic system. Whenever a mathematical proposition is logically independent of the axioms encoded in the measured state, the measurement associated with the proposition gives random outcomes. This allows for an experimental test of logical independence. Conversely, it also allows for an explanation of the probabilities of random outcomes observed in Pauli group measurements from logical independence without invoking quantum theory. The axiomatic systems we study can be completed and are therefore not subject to Goedel's incompleteness theorem.

  2. Logical independence and quantum randomness

    Energy Technology Data Exchange (ETDEWEB)

    Paterek, T; Kofler, J; Aspelmeyer, M; Zeilinger, A; Brukner, C [Institute for Quantum Optics and Quantum Information, Austrian Academy of Sciences, Boltzmanngasse 3, A-1090 Vienna (Austria); Prevedel, R; Klimek, P [Faculty of Physics, University of Vienna, Boltzmanngasse 5, A-1090 Vienna (Austria)], E-mail: tomasz.paterek@univie.ac.at

    2010-01-15

    We propose a link between logical independence and quantum physics. We demonstrate that quantum systems in the eigenstates of Pauli group operators are capable of encoding mathematical axioms and show that Pauli group quantum measurements are capable of revealing whether or not a given proposition is logically dependent on the axiomatic system. Whenever a mathematical proposition is logically independent of the axioms encoded in the measured state, the measurement associated with the proposition gives random outcomes. This allows for an experimental test of logical independence. Conversely, it also allows for an explanation of the probabilities of random outcomes observed in Pauli group measurements from logical independence without invoking quantum theory. The axiomatic systems we study can be completed and are therefore not subject to Goedel's incompleteness theorem.

  3. Algae: America's Pathway to Independence

    National Research Council Canada - National Science Library

    Custer, James

    2007-01-01

    .... Oil dependency is an unacceptable risk to U.S. national strategy. This paper advocates independence from foreign oil by converting the national transportation fleet to biodiesel derived from algae...

  4. SURFACE BRIGHTNESS PROFILES OF DWARF GALAXIES. I. PROFILES AND STATISTICS

    International Nuclear Information System (INIS)

    Herrmann, Kimberly A.; Hunter, Deidre A.; Elmegreen, Bruce G.

    2013-01-01

    Radial surface brightness profiles of spiral galaxies are classified into three types: (I) single exponential, or the light falls off with one exponential to a break before falling off (II) more steeply, or (III) less steeply. Profile breaks are also found in dwarf disks, but some dwarf Type IIs are flat or increasing out to a break before falling off. Here we re-examine the stellar disk profiles of 141 dwarfs: 96 dwarf irregulars (dIms), 26 Blue Compact Dwarfs (BCDs), and 19 Magellanic-type spirals (Sms). We fit single, double, or even triple exponential profiles in up to 11 passbands: GALEX FUV and NUV, ground-based UBVJHK and Hα, and Spitzer 3.6 and 4.5 μm. We find that more luminous galaxies have brighter centers, larger inner and outer scale lengths, and breaks at larger radii; dwarf trends with M B extend to spirals. However, the V-band break surface brightness is independent of break type, M B , and Hubble type. Dwarf Type II and III profiles fall off similarly beyond the breaks but have different interiors and IIs break ∼twice as far as IIIs. Outer Type II and III scale lengths may have weak trends with wavelength, but pure Type II inner scale lengths clearly decrease from the FUV to visible bands whereas Type III inner scale lengths increase with redder bands. This suggests the influence of different star formation histories on profile type, but nonetheless the break location is approximately the same in all passbands. Dwarfs continue trends between profile and Hubble types such that later-type galaxies have more Type II but fewer Type I and III profiles than early-type spirals. BCDs and Sms are over-represented as Types III and II, respectively, compared to dIms

  5. Bağımsız Seyahat Eden Yerli Gezginlerin Profili ve Seyahat Alışkanlıkları Üzerine Bir Araştırma A Research On Profile And Trip-Related Characteristics Of Turkish Independent Travellers

    Directory of Open Access Journals (Sweden)

    Serhat HARMAN

    2013-07-01

    Full Text Available Number of Turkish citizens taking abroad and domestic trips isincreasing every year. Independent travellers constitute an importantsegment in World travel market. But there has been no research onprofile and trip-related characteristics of Turkish independenttravellers. In this study, profile and trip-related characteristics ofTurkish independent travellers’ were tried to be determined via asurvey. Survey was implemented through website between 15September 2012 and 15 May 2013, and 163 Turkish independenttravellers participated to the survey. Findings of the research indicatedthat more than half of the participants are male; most of them aresingle and holding bachelor degree at least. It is understood that 34percent of participants taking their trips alone while 42 percentsgenerally taking their trips with friends. Number of international tripstaken in last three years varies between 1 and 20 with average 4international trips. On the other hand, number of domestic trips takenby participants varies between 1 and 30; average number of domestictrips was calculated as 6. It was found that intercity buses, plains,train, autos are most preferred transportation vehicles by participants.Also, it was found that travellers stay over averagely 7,65 days in theirdomestic trips in Turkey while 15 days in their trips abroad. Study endswith suggestions both for the tourism establishments and publicauthorities. Yurtiçi ve yurtdışı seyahate çıkan Türk vatandaşı sayısı her geçen yıl artmaktadır. Bağımsız seyahat eden gezginler Dünya seyahat pazarı içinde önemli bir pazar bölümünü oluşturmaktadır. Ancak, yurtiçi turizm alan yazında bağımsız seyahat eden yerli gezginlerin profilleri ve seyahat alışkanları üzerine herhangi bir araştırma bulunmamaktadır. Bu çalışmada, bağımsız seyahat eden yerli gezginlerin profilleri ve seyahat alışkanlıkları tarama tipinde tasarlanan bir alan araştırması belirlenmeye çal

  6. Independent variables in 3 + 1 Regge calculus

    International Nuclear Information System (INIS)

    Tuckey, P.A.

    1989-01-01

    The space of metrics in 3+1 Regge calculus is discussed, and the problems of counting its dimensions, and of finding independent variables to parametrise the space, are addressed. The most general natural class of metrics is considered first, and bounds on its dimension are obtained, although no good parametrisations are found. The relationship between these metrics and those used in canonical Regge calculus is shown, and this leads to an interesting result via the Bianchi identities. A restricted class of metrics is then considered and independent variables, which parametrise these metrics and which may be computationally convenient, are given. The dimension of this space of metrics gives an improved lower bound for the dimension of the general space. (author)

  7. Process optimization for obtaining nano cellulose from curaua fiber

    International Nuclear Information System (INIS)

    Lunz, Juliana do N.; Cordeiro, Suellem B.; Mota, Jose Carlos F.; Marques, Maria de Fatima V.

    2011-01-01

    This study focuses on the methodology for optimization to obtain nanocellulose from vegetal fibers. An experimental planning was carried out for the treatment of curaua fibers and parameters were estimated, having the concentration of H 2 SO 4 , hydrolysis time, reaction temperature and time of sonication applied as independent variables for further statistical analysis. According to the estimated parameters, the statistically significant effects were determined for the process of obtaining nanocellulose. According to the results obtained from the thermogravimetric analysis (TGA) it was observed that certain conditions led to cellulose with degradation temperatures near or even above that of untreated cellulose fibers. The crystallinity index (IC) obtained after fiber treatment (X-ray diffraction) were higher than that of the pure fiber. Treatments with high acid concentrations led to higher IC. (author)

  8. From profile to sawtooth control: developing feedback control using ECRH/ECCD systems on the TCV tokamak

    International Nuclear Information System (INIS)

    Paley, J I; Felici, F; Coda, S; Goodman, T P

    2009-01-01

    Real time control of heating systems is essential to maximize plasma performance and avoid or neutralize instabilities under changing plasma conditions. Several feedback control algorithms have been developed on the Tokamak a Configuration Variable (TCV) tokamak that use the electron cyclotron (ECRH/ECCD) system to control a wide range of plasma properties, including the plasma current, shape, profiles as well as the sawtooth instability. Controllers have been developed to obtain sawteeth of a pre-determined period, to maximize the sawtooth period using an extremum seeking control algorithm and finally to provide simultaneous control of the plasma emission profile peak and width using multiple independent EC actuators.

  9. Retrieval of ozone profiles from OMPS limb scattering observations

    Directory of Open Access Journals (Sweden)

    C. Arosio

    2018-04-01

    Full Text Available This study describes a retrieval algorithm developed at the University of Bremen to obtain vertical profiles of ozone from limb observations performed by the Ozone Mapper and Profiler Suite (OMPS. This algorithm is based on the technique originally developed for use with data from the SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY (SCIAMACHY instrument. As both instruments make limb measurements of the scattered solar radiation in the ultraviolet (UV and visible (Vis spectral ranges, an underlying objective of the study is to obtain consolidated and consistent ozone profiles from the two satellites and to produce a combined data set. The retrieval algorithm uses radiances in the UV and Vis wavelength ranges normalized to the radiance at an upper tangent height to obtain ozone concentrations in the altitude range of 12–60 km. Measurements at altitudes contaminated by clouds in the instrument field of view are identified and filtered out. An independent aerosol retrieval is performed beforehand and its results are used to account for the stratospheric aerosol load in the ozone inversion. The typical vertical resolution of the retrieved profiles varies from  ∼  2.5 km at lower altitudes ( < 30 km to  ∼  1.5 km (about 45 km and becomes coarser at upper altitudes. The retrieval errors resulting from the measurement noise are estimated to be 1–4 % above 25 km, increasing to 10–30 % in the upper troposphere. OMPS data are processed for the whole of 2016. The results are compared with the NASA product and validated against profiles derived from passive satellite observations or measured in situ by balloon-borne sondes. Between 20 and 60 km, OMPS ozone profiles typically agree with data from the Microwave Limb Sounder (MLS v4.2 within 5–10 %, whereas in the lower altitude range the bias becomes larger, especially in the tropics. The comparison of OMPS profiles with ozonesonde

  10. Lyapunov-based distributed control of the safety-factor profile in a tokamak plasma

    International Nuclear Information System (INIS)

    Bribiesca Argomedo, Federico; Witrant, Emmanuel; Prieur, Christophe; Brémond, Sylvain; Nouailletas, Rémy; Artaud, Jean-François

    2013-01-01

    A real-time model-based controller is developed for the tracking of the distributed safety-factor profile in a tokamak plasma. Using relevant physical models and simplifying assumptions, theoretical stability and robustness guarantees were obtained using a Lyapunov function. This approach considers the couplings between the poloidal flux diffusion equation, the time-varying temperature profiles and an independent total plasma current control. The actuator chosen for the safety-factor profile tracking is the lower hybrid current drive, although the results presented can be easily extended to any non-inductive current source. The performance and robustness of the proposed control law is evaluated with a physics-oriented simulation code on Tore Supra experimental test cases. (paper)

  11. Viewpoint-independent contextual cueing effect

    Directory of Open Access Journals (Sweden)

    taiga etsuchiai

    2012-06-01

    Full Text Available We usually perceive things in our surroundings as unchanged despite viewpoint changes caused by self-motion. The visual system therefore must have a function to process objects independently of viewpoint. In this study, we examined whether viewpoint-independent spatial layout can be obtained implicitly. For this purpose, we used a contextual cueing effect, a learning effect of spatial layout in visual search displays known to be an implicit effect. We compared the transfer of the contextual cueing effect between cases with and without self-motion by using visual search displays for 3D objects, which changed according to the participant’s assumed location for viewing the stimuli. The contextual cueing effect was obtained with self-motion but disappeared when the display changed without self-motion. This indicates that there is an implicit learning effect in spatial coordinates and suggests that the spatial representation of object layouts or scenes can be obtained and updated implicitly. We also showed that binocular disparity play an important role in the layout representations.

  12. Food Independence of the Region

    Directory of Open Access Journals (Sweden)

    Vasiliy Vladimirovich Tyutyunik

    2016-06-01

    Full Text Available The article deals with such basic definitions as food security, food independence and food self- sufficiency of the region. The author shows the ambiguity problem of interpretations of these terms in the Russian legislation, which is especially evident in the transition from the national to the regional level. Using the example of legislative acts of some of the Russian Federation’s subjects the study demonstrates the incorrect use of mentioned terms. In author’s opinion, regional authorities in the Russian Federation must introduce amendments to the legislative documents concerning food security. To be more concrete, the regional authorities should either deny the goal of food independence for a particular region, or specify that the goal of reaching food independence for the region does not mean food self-sufficiency, but just import substitution on the regional level

  13. Obtaining shale oil suitable for lighting

    Energy Technology Data Exchange (ETDEWEB)

    Giraudel, M

    1851-11-12

    Treats with sulphuric acid and then with soda, obtaining 57 per cent of products suitable for lighting in place of the usual 35 to 40 per cent as obtained by present processes. The product has a less disagreeable odor.

  14. New dynamic NNORSY ozone profile climatology

    Science.gov (United States)

    Kaifel, A. K.; Felder, M.; Declercq, C.; Lambert, J.-C.

    2012-01-01

    Climatological ozone profile data are widely used as a-priori information for total ozone using DOAS type retrievals as well as for ozone profile retrieval using optimal estimation, for data assimilation or evaluation of 3-D chemistry-transport models and a lot of other applications in atmospheric sciences and remote sensing. For most applications it is important that the climatology represents not only long term mean values but also the links between ozone and dynamic input parameters. These dynamic input parameters should be easily accessible from auxiliary datasets or easily measureable, and obviously should have a high correlation with ozone. For ozone profile these parameters are mainly total ozone column and temperature profile data. This was the outcome of a user consultation carried out in the framework of developing a new, dynamic ozone profile climatology. The new ozone profile climatology is based on the Neural Network Ozone Retrieval System (NNORSY) widely used for ozone profile retrieval from UV and IR satellite sounder data. NNORSY allows implicit modelling of any non-linear correspondence between input parameters (predictors) and ozone profile target vector. This paper presents the approach, setup and validation of a new family of ozone profile climatologies with static as well as dynamic input parameters (total ozone and temperature profile). The neural network training relies on ozone profile measurement data of well known quality provided by ground based (ozonesondes) and satellite based (SAGE II, HALOE, and POAM-III) measurements over the years 1995-2007. In total, four different combinations (modes) for input parameters (date, geolocation, total ozone column and temperature profile) are available. The geophysical validation spans from pole to pole using independent ozonesonde, lidar and satellite data (ACE-FTS, AURA-MLS) for individual and time series comparisons as well as for analysing the vertical and meridian structure of different modes of

  15. Fully device-independent conference key agreement

    Science.gov (United States)

    Ribeiro, Jérémy; Murta, Gláucia; Wehner, Stephanie

    2018-02-01

    We present a security analysis of conference key agreement (CKA) in the most adversarial model of device independence (DI). Our protocol can be implemented by any experimental setup that is capable of performing Bell tests [specifically, the Mermin-Ardehali-Belinskii-Klyshko (MABK) inequality], and security can in principle be obtained for any violation of the MABK inequality that detects genuine multipartite entanglement among the N parties involved in the protocol. As our main tool, we derive a direct physical connection between the N -partite MABK inequality and the Clauser-Horne-Shimony-Holt (CHSH) inequality, showing that certain violations of the MABK inequality correspond to a violation of the CHSH inequality between one of the parties and the other N -1 . We compare the asymptotic key rate for device-independent conference key agreement (DICKA) to the case where the parties use N -1 device-independent quantum key distribution protocols in order to generate a common key. We show that for some regime of noise the DICKA protocol leads to better rates.

  16. A model to obtain an optimum erbium desity for gain increasing in EDFA

    OpenAIRE

    E. Arzi; A. Hassani; F. E. Seraji

    2003-01-01

      In this paper, we suggest a novel model, based on input pump power and wave guidestructure, to calculate the Er-density profile in Erbium doped fiber amplifiers. This optimization is carried out for both SMF and DSF fibers. These optimized profiles have a Gaussian-like shape. Using the SMF optimized Er-density profile, high gain enhancement is obtained in a relatively short length of fibers. On the other hand, the DSF optimized profile shows small changes in the gain, which agrees with the ...

  17. A model to obtain an optimum erbium desity for gain increasing in EDFA

    Directory of Open Access Journals (Sweden)

    E. Arzi

    2003-12-01

    Full Text Available   In this paper, we suggest a novel model, based on input pump power and wave guidestructure, to calculate the Er-density profile in Erbium doped fiber amplifiers. This optimization is carried out for both SMF and DSF fibers. These optimized profiles have a Gaussian-like shape. Using the SMF optimized Er-density profile, high gain enhancement is obtained in a relatively short length of fibers. On the other hand, the DSF optimized profile shows small changes in the gain, which agrees with the previously report on other method of gain enhancement. This model is applicable to all active waveguides and any other dopant as well .

  18. Supplying safety and energy independence

    International Nuclear Information System (INIS)

    Maillard, D.

    2001-03-01

    The french Observatory of the Energy wonders about the energy independence notion. Many risks are possible: physical, economical, geo-political, social and ecological risks. Because those risks are numerous, the answers for a supplying safety are also numerous. In this context the energy policy is a difficult art which the public opinion needs to be more and more aware. (A.L.B.)

  19. Independent Study Project, Topic: Topology.

    Science.gov (United States)

    Notre Dame High School, Easton, PA.

    Using this guide and the four popular books noted in it, a student, working independently, will learn about some of the classical ideas and problems of topology: the Meobius strip and Klein bottle, the four color problem, genus of a surface, networks, Euler's formula, and the Jordan Curve Theorem. The unit culminates in a project of the students'…

  20. Charge independence and charge symmetry

    Energy Technology Data Exchange (ETDEWEB)

    Miller, G A [Washington Univ., Seattle, WA (United States). Dept. of Physics; van Oers, W T.H. [Manitoba Univ., Winnipeg, MB (Canada). Dept. of Physics; [TRIUMF, Vancouver, BC (Canada)

    1994-09-01

    Charge independence and charge symmetry are approximate symmetries of nature, violated by the perturbing effects of the mass difference between up and down quarks and by electromagnetic interactions. The observations of the symmetry breaking effects in nuclear and particle physics and the implications of those effects are reviewed. (author). 145 refs., 3 tabs., 11 figs.

  1. Charge independence and charge symmetry

    International Nuclear Information System (INIS)

    Miller, G.A.

    1994-09-01

    Charge independence and charge symmetry are approximate symmetries of nature, violated by the perturbing effects of the mass difference between up and down quarks and by electromagnetic interactions. The observations of the symmetry breaking effects in nuclear and particle physics and the implications of those effects are reviewed. (author). 145 refs., 3 tabs., 11 figs

  2. The Regulatory Independence of FANR

    International Nuclear Information System (INIS)

    ALNuaimi, Fatema; Choi, Kwang Shik

    2012-01-01

    Regulatory independence is meant to provide a conservative system of policy making in order to comply with the problems that are forecasted upon the basis of assumptions. The Federal Authorization of Nuclear Regulation (FANR) is a regulatory commission that was formed to be regulatory body that governs the generation of nuclear power in United Arab Emirates. It was established under the UAE nuclear law (9/2009) as an independent regulatory body that was tasked with the regulation of all nuclear activities in the United Arab Emirates. As an independent body, FANR was tasked with ensuring that the regulation of the nuclear sector is done in effective and transparent manner to ensure its accountability to the people. Being independent, the regulatory body develops national nuclear regulations based on laid down safety standards by the International Atomic Energy Agency, ensuring that they are based on scientific and proven technologies The role of FANR is to ensure that the all corporations that undertake nuclear activities follow the laid down procedures and objectives and ensure safety measures are taken keenly to ensure the safety of the workers and the general public while at the same time ensuring the environment is free from nuclear radiations

  3. Characteristics of Independent Music Teachers

    Science.gov (United States)

    Upitis, Rena; Abrami, Philip C.; Brook, Julia; Boese, Karen; King, Matthew

    2017-01-01

    The purpose of the present study was to learn about the characteristics of independent music teachers, their beliefs about music teaching, and their studio practices. A self-report survey included questions about the teachers' (a) background experiences, (b) pedagogical approaches, (c) use of digital technologies, and (d) professional development…

  4. The Regulatory Independence of FANR

    Energy Technology Data Exchange (ETDEWEB)

    ALNuaimi, Fatema; Choi, Kwang Shik [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2012-05-15

    Regulatory independence is meant to provide a conservative system of policy making in order to comply with the problems that are forecasted upon the basis of assumptions. The Federal Authorization of Nuclear Regulation (FANR) is a regulatory commission that was formed to be regulatory body that governs the generation of nuclear power in United Arab Emirates. It was established under the UAE nuclear law (9/2009) as an independent regulatory body that was tasked with the regulation of all nuclear activities in the United Arab Emirates. As an independent body, FANR was tasked with ensuring that the regulation of the nuclear sector is done in effective and transparent manner to ensure its accountability to the people. Being independent, the regulatory body develops national nuclear regulations based on laid down safety standards by the International Atomic Energy Agency, ensuring that they are based on scientific and proven technologies The role of FANR is to ensure that the all corporations that undertake nuclear activities follow the laid down procedures and objectives and ensure safety measures are taken keenly to ensure the safety of the workers and the general public while at the same time ensuring the environment is free from nuclear radiations

  5. Revised Line Profile Function for Hydrogenic Species

    Directory of Open Access Journals (Sweden)

    Sapar A.

    2012-09-01

    Full Text Available Analytical series expansions for the hydrogenic spectral line profile functions are derived starting from the three single expressions, obtained by integrating twice the convolution of the Holtsmark, Lorentz and Doppler line profile functions. We get well converging series expansions for the line wings and centers by reducing the number of arguments in the profile function by one, introducing the module of the Holtsmark and Lorentz profiles as a new argument. In the intermediate part of the line, the parabolic cylinder functions expressed via the confluent hypergeometric series, are used. The multi-component Stark splitting of the hydrogenic spectral lines and the modeled stochastic electron transitions in the electric field of the adjacent ions generate wide Doppler plateaux at the line centers, with the characteristic widths estimated from the fit to the characteristic width of the Holtsmark profile. This additional Doppler broadening of the line profile function removes the central dip typical to the Holtsmark profile.

  6. Profile: Asian Americans

    Science.gov (United States)

    ... and Data > Minority Population Profiles > Asian American Profile: Asian Americans Asian American Profile (Map of the US with the top 10 states displaying the largest Asian American population according to the Census Bureau) CA - ...

  7. Analysis of the technical impact of decentralized independent production based on cogeneration, in public distribution systems; Analise do impacto tecnico da producao independente descentralizada baseada em cogeracao em redes de distribuicao de servico publico

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Jose L. Pereira da; Lopes, J.A. Pecas [Universidade do Porto (Portugal). Faculdade de Engenharia; Pascoal, Jose A.F. [Instituto de Engenharia de Sistemas e Computadores (INESC), Porto (Portugal)

    1999-07-01

    This paper describes the methodology adopted and the results obtained in the evaluation of the impact of decentralized independent production plants based on cogeneration in the distribution system of Portugal Public Service. The analysis concerns with impact on a medium voltage network where the significant integration of these units occurs. The methodology involved the definition of various exploration scenarios, specifically the recent regulations related to the reactive energy to be supplied to the network, during peak and full hours, by the independent production. This work also presents the global results of impact no the system, considering voltage profiles, branching congestion and network losses.

  8. Plasma profile recovery by function parameterisation

    International Nuclear Information System (INIS)

    McCarthy, P.J.; Sexton, M.C.

    1986-11-01

    The use of Function Parameterisation for the recovery of plasma profiles as a function of flux surface area from spatial point data directly combined with external magnetic measurements is demonstrated in the case of ASDEX electron temperature and density profiles. The extrapolated temperature on the magnetic axis is shown to be more reliable than that obtained from a conventional fitting procedure. (orig.)

  9. Molecular weight profiles of proanthocyanidin polymers

    Science.gov (United States)

    Vincent M. Williams; Lawrence J. Porter; Richard W. Hemingway

    1983-01-01

    The MW profiles of proanthocyanidin polymers (condensed tannins) from 32 samples representing a wide range of plant tissues of many different species have been obtained by gel permeation chromatography of the peracetate derivatives. The tannins vary widely in MW, with M values for the peracetates in the range 1600-5500. The MW profiles vary greatly from those with...

  10. Temperature profiles from Salt Valley, Utah

    Science.gov (United States)

    Sass, J. H.; Lachenbruch, A. H.; Smith, E. P.

    Temperature profiles were obtained in the nine drilled wells as part of a thermal study of the Salt Valley anticline, Paradox Basin, Utha. Thermal conductivities were also measured on 10 samples judged to be representative of the rocks encountered in the deepest hole. The temperature profiles and thermal conductivities are presented, together with preliminary interpretive remarks and suggestions for additional work.

  11. Retrieval of ozone profiles from OMPS limb scattering observations

    Science.gov (United States)

    Arosio, Carlo; Rozanov, Alexei; Malinina, Elizaveta; Eichmann, Kai-Uwe; von Clarmann, Thomas; Burrows, John P.

    2018-04-01

    This study describes a retrieval algorithm developed at the University of Bremen to obtain vertical profiles of ozone from limb observations performed by the Ozone Mapper and Profiler Suite (OMPS). This algorithm is based on the technique originally developed for use with data from the SCanning Imaging Absorption spectroMeter for Atmospheric CHartographY (SCIAMACHY) instrument. As both instruments make limb measurements of the scattered solar radiation in the ultraviolet (UV) and visible (Vis) spectral ranges, an underlying objective of the study is to obtain consolidated and consistent ozone profiles from the two satellites and to produce a combined data set. The retrieval algorithm uses radiances in the UV and Vis wavelength ranges normalized to the radiance at an upper tangent height to obtain ozone concentrations in the altitude range of 12-60 km. Measurements at altitudes contaminated by clouds in the instrument field of view are identified and filtered out. An independent aerosol retrieval is performed beforehand and its results are used to account for the stratospheric aerosol load in the ozone inversion. The typical vertical resolution of the retrieved profiles varies from ˜ 2.5 km at lower altitudes ( passive satellite observations or measured in situ by balloon-borne sondes. Between 20 and 60 km, OMPS ozone profiles typically agree with data from the Microwave Limb Sounder (MLS) v4.2 within 5-10 %, whereas in the lower altitude range the bias becomes larger, especially in the tropics. The comparison of OMPS profiles with ozonesonde measurements shows differences within ±5 % between 13 and 30 km at northern middle and high latitudes. At southern middle and high latitudes, an agreement within 5-7 % is also achieved in the same altitude range. An unexpected bias of approximately 10-20 % is detected in the lower tropical stratosphere. The processing of the 2013 data set using the same retrieval settings and its validation against ozonesondes reveals a much

  12. Field development finance for independents

    International Nuclear Information System (INIS)

    Whyatt, A.S.

    1995-01-01

    Worldwide, oil and gas reserves are in decline, and independents own relatively little of them, say 13 percent of the oil reserves and 22 percent of the gas reserves. Over the five years 1989-93, the oil reserves of majors declined by 4.5 percent, while those of independents rose 17 percent; each experienced a rise in gas reserves of 6-7 percent. Partly because of this gentle decline in world reserves, but much more because of the decline in oil and gas commodity prices, the value of the reserves, expressed in terms of future production, has been declining substantially. In 1993, when these data were last recorded, the discounted future net cash flows in the United States were 40 percent below their 1990 peak of $135 billion, and foreign net cash flows were 35 percent lower than the 1990 peak of $140 billion. (author)

  13. [Accreditation of Independent Ethics Committees].

    Science.gov (United States)

    Ramiro Avilés, Miguel A

    According to Law 14/2007 and Royal Decree 1090/2015, biomedical research must be assessed by an Research Ethics Committee (REC), which must be accredited as an Research ethics committee for clinical trials involving medicinal products (RECm) if the opinion is issued for a clinical trial involving medicinal products or clinical research with medical devices. The aim of this study is to ascertain how IEC and IECm accreditation is regulated. National and regional legislation governing biomedical research was analysed. No clearly-defined IEC or IECm accreditation procedures exist in the national or regional legislation. Independent Ethics Committees are vital for the development of basic or clinical biomedical research, and they must be accredited by an external body in order to safeguard their independence, multidisciplinary composition and review procedures. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  14. Electron shower transverse profile measurement

    International Nuclear Information System (INIS)

    Lednev, A.A.

    1993-01-01

    A method to measure the shower transverse profile is described. Calibration data of the lead-glass spectrometer GAMS collected in a wide electron beam without any additional coordinate detector are used. The method may be used for the measurements in both cellular- and projective-type spectrometers. The results of measuring the 10 GeV electron shower profile in the GAMS spectrometer, without optical grease between the lead-glass radiators and photomultipliers, are approximated with an analytical function. The estimate of the coordinate accuracy is obtained. 5 refs., 8 figs

  15. Study on Rail Profile Optimization Based on the Nonlinear Relationship between Profile and Wear Rate

    Directory of Open Access Journals (Sweden)

    Jianxi Wang

    2017-01-01

    Full Text Available This paper proposes a rail profile optimization method that takes account of wear rate within design cycle so as to minimize rail wear at the curve in heavy haul railway and extend the service life of rail. Taking rail wear rate as the object function, the vertical coordinate of rail profile at range optimization as independent variable, and the geometric characteristics and grinding depth of rail profile as constraint conditions, the support vector machine regression theory was used to fit the nonlinear relationship between rail profile and its wear rate. Then, the profile optimization model was built. Based on the optimization principle of genetic algorithm, the profile optimization model was solved to achieve the optimal rail profile. A multibody dynamics model was used to check the dynamic performance of carriage running on optimal rail profile. The result showed that the average relative error of support vector machine regression model remained less than 10% after a number of training processes. The dynamic performance of carriage running on optimized rail profile met the requirements on safety index and stability. The wear rate of optimized profile was lower than that of standard profile by 5.8%; the allowable carrying gross weight increased by 12.7%.

  16. Temperature boundary layer profiles in turbulent Rayleigh-Benard convection

    Science.gov (United States)

    Ching, Emily S. C.; Emran, Mohammad S.; Horn, Susanne; Shishkina, Olga

    2017-11-01

    Classical boundary-layer theory for steady flows cannot adequately describe the boundary layer profiles in turbulent Rayleigh-Benard convection. We have developed a thermal boundary layer equation which takes into account fluctuations in terms of an eddy thermal diffusivity. Based on Prandtl's mixing length ideas, we relate the eddy thermal diffusivity to the stream function. With this proposed relation, we can solve the thermal boundary layer equation and obtain a closed-form expression for the dimensionless mean temperature profile in terms of two independent parameters: θ(ξ) =1/b∫0b ξ [ 1 +3a3/b3(η - arctan(η)) ] - c dη , where ξ is the similarity variable and the parameters a, b, and c are related by the condition θ(∞) = 1 . With a proper choice of the parameters, our predictions of the temperature profile are in excellent agreement with the results of our direct numerical simulations for a wide range of Prandtl numbers (Pr), from Pr=0.01 to Pr=2547.9. OS, ME and SH acknowledge the financial support by the Deutsche Forschungsgemeinschaft (DFG) under Grants Sh405/4-2 (Heisenberg fellowship), Sh405/3-2 and Ho 5890/1-1, respectively.

  17. Embedding piezoresistive pressure sensors to obtain online pressure profiles inside fiber composite laminates.

    Science.gov (United States)

    Moghaddam, Maryam Kahali; Breede, Arne; Brauner, Christian; Lang, Walter

    2015-03-27

    The production of large and complex parts using fiber composite materials is costly due to the frequent formation of voids, porosity and waste products. By embedding different types of sensors and monitoring the process in real time, the amount of wastage can be significantly reduced. This work focuses on developing a knowledge-based method to improve and ensure complete impregnation of the fibers before initiation of the resin cure. Piezoresistive and capacitive pressure sensors were embedded in fiber composite laminates to measure the real-time the pressure values inside the laminate. A change of pressure indicates resin infusion. The sensors were placed in the laminate and the resin was infused by vacuum. The embedded piezoresistive pressure sensors were able to track the vacuum pressure in the fiber composite laminate setup, as well as the arrival of the resin at the sensor. The pressure increase due to closing the resin inlet was also measured. In contrast, the capacitive type of sensor was found to be inappropriate for measuring these quantities. The following study demonstrates real-time monitoring of pressure changes inside the fiber composite laminate, which validate the use of Darcy's law in porous media to control the resin flow during infusion.

  18. Embedding Piezoresistive Pressure Sensors to Obtain Online Pressure Profiles Inside Fiber Composite Laminates

    OpenAIRE

    Kahali Moghaddam, Maryam; Breede, Arne; Brauner, Christian; Lang, Walter

    2015-01-01

    The production of large and complex parts using fiber composite materials is costly due to the frequent formation of voids, porosity and waste products. By embedding different types of sensors and monitoring the process in real time, the amount of wastage can be significantly reduced. This work focuses on developing a knowledge-based method to improve and ensure complete impregnation of the fibers before initiation of the resin cure. Piezoresistive and capacitive pressure sensors were embedde...

  19. Polycrystalline silicon carbide dopant profiles obtained through a scanning nano-Schottky contact

    Energy Technology Data Exchange (ETDEWEB)

    Golt, M. C.; Strawhecker, K. E.; Bratcher, M. S. [U.S. Army Research Laboratory, WMRD, Aberdeen Proving Ground, Maryland 21005 (United States); Shanholtz, E. R. [ORISE, Belcamp, Maryland 21017 (United States)

    2016-07-14

    The unique thermo-electro-mechanical properties of polycrystalline silicon carbide (poly-SiC) make it a desirable candidate for structural and electronic materials for operation in extreme environments. Necessitated by the need to understand how processing additives influence poly-SiC structure and electrical properties, the distribution of lattice defects and impurities across a specimen of hot-pressed 6H poly-SiC processed with p-type additives was visualized with high spatial resolution using a conductive atomic force microscopy approach in which a contact forming a nano-Schottky interface is scanned across the sample. The results reveal very intricate structures within poly-SiC, with each grain having a complex core-rim structure. This complexity results from the influence the additives have on the evolution of the microstructure during processing. It was found that the highest conductivities localized at rims as well as at the interface between the rim and the core. The conductivity of the cores is less than the conductivity of the rims due to a lower concentration of dopant. Analysis of the observed conductivities and current-voltage curves is presented in the context of nano-Schottky contact regimes where the conventional understanding of charge transport to diode operation is no longer valid.

  20. Polycrystalline silicon carbide dopant profiles obtained through a scanning nano-Schottky contact

    International Nuclear Information System (INIS)

    Golt, M. C.; Strawhecker, K. E.; Bratcher, M. S.; Shanholtz, E. R.

    2016-01-01

    The unique thermo-electro-mechanical properties of polycrystalline silicon carbide (poly-SiC) make it a desirable candidate for structural and electronic materials for operation in extreme environments. Necessitated by the need to understand how processing additives influence poly-SiC structure and electrical properties, the distribution of lattice defects and impurities across a specimen of hot-pressed 6H poly-SiC processed with p-type additives was visualized with high spatial resolution using a conductive atomic force microscopy approach in which a contact forming a nano-Schottky interface is scanned across the sample. The results reveal very intricate structures within poly-SiC, with each grain having a complex core-rim structure. This complexity results from the influence the additives have on the evolution of the microstructure during processing. It was found that the highest conductivities localized at rims as well as at the interface between the rim and the core. The conductivity of the cores is less than the conductivity of the rims due to a lower concentration of dopant. Analysis of the observed conductivities and current-voltage curves is presented in the context of nano-Schottky contact regimes where the conventional understanding of charge transport to diode operation is no longer valid.

  1. Obtaining thickness profiles from the tomographic inversion of guided wave data

    NARCIS (Netherlands)

    Bloom, J.G.P.; Luiten, E.A.; Volker, A.W.F.

    2009-01-01

    Guided wave tomography is a promising technique for the monitoring of corrosion over large areas. Guided waves have a wave speed mat depends in certain frequency-thickness regimes on the local thickness of the waveguide they follow. Therefore, the travel time of the guided wave over a fixed distance

  2. The genetic profiles of two salmonid populations from Romania obtained through nuclear markers analysis

    Directory of Open Access Journals (Sweden)

    Ramona Nechifor

    2017-05-01

    Full Text Available The Salmonidae fish family is well represented in Romanian fauna, with a total of six species in the wild and reared in fish farms. Among them, the brown trout (Salmo trutta fario can be found in all major Romanian river basins. However, anthropogenic activities might disrupt salmonids’ habitats, so that inbreeding and genetic isolation might easily occur in the wild populations. We analyzed two wild brown trout populations from rivers targeted by anthropogenic activities, by using nuclear markers and genotyping in order to observe their genetic structure. We analyzed nine microsatellites and we observed their alleles frequencies, number of private alleles, observed and expected heterozygosity, as well as their population structure. The two populations are not in Hardy-Weinberg equilibrium for most of the loci and the inbreeding coefficient for both populations suggests a heterozygote deficit. Further sequencing data are needed in order to have a better view upon their complete genetic structure.

  3. Chemical Profiling of Acalypha Indica Obtained from Supercritical Carbon Dioxide Extraction and Soxhlet Extraction Methods

    OpenAIRE

    Surangkana Chaichoowong; Jan Bernd Bol; Pornprapa Bol; Thomas Gamse; Malinee Sriariyanun

    2017-01-01

    Acalypha indica is a weed that grows in South-East Asia. It contains several valuable compounds that can be used for curing various diseases such as rheumatism, skin infection and blood dysentery. Here, the extraction of A. indica using Soxhlet extraction with two different solvents and supercritical CO2 extraction (SCE) with two different temperatures (40 and 60°C) was performed. In Soxhlet extraction, ethanol solvent provided the highest extraction yield of 34.36%. For SCE, the increased te...

  4. A Mathematical Technique for Estimating True Temperature Profiles of Data Obtained from Long Time Constant Thermocouples

    Science.gov (United States)

    1998-02-01

    zero, and has therefore been ignored. The inverse transform of Equation (11) (but ignoring the 5.8x) term, yields Equation (12), which is the...done for TC #1, this is ignored in the results. The inverse transform of Equation (14) (but ignoring the 10x) term, yields Equation (15), which is...2.568r 2.568 0.36 A^ —— + + —i— + + 0.36r (19) s s s s The inverse transform of Equation (19) (but ignoring the 0.36x) term, yields

  5. Assessment of dental alterations and facial profile obtained in orthodontic treatment with self-ligating brackets

    OpenAIRE

    Kochenborger, Ricardo

    2009-01-01

    Este trabalho teve como objetivo principal avaliar as inclinações dentárias e o perfil facial de pacientes tratados ortodonticamente com braquete autoligado Damon 2, prescrição padrão. Para este estudo, foi selecionada uma amostra de 18 indivíduos, sendo 12 do sexo masculino e 6 do feminino, com idades que variaram de 12 a 20 anos (idade média de 15 anos) e que apresentavam discrepância de modelo negativa (de 4 mm a 15 mm). Como critério de inclusão, os pacientes deveriam apresentar dentição ...

  6. "Who Takes a Second Chance?" Profile of Participants in Alternative Systems for Obtaining a Secondary Diploma

    Science.gov (United States)

    Glorieux, Ignace; Heyman, Ryfka; Jegers, Marc; Taelman, Maaike

    2011-01-01

    In Belgium, the Exam Board (EB) and the Secondary School for Adults (SSA) are two different ways to attain a secondary diploma after leaving secondary school without a diploma. The SSA is part of the regular educational system and organises courses with an adult approach. The EB is a flexible system in which students prepare themselves to do…

  7. Type II diabetes patients in primary care : profiles of healthcare utilization obtained from observational data

    NARCIS (Netherlands)

    van Dijk, C.E.; Hoekstra, T.; Verheij, R.A.; Twisk, J.W.R.; Groenewegen, P.P.; Schellevis, F.G.; et al, [No Value

    2013-01-01

    Background The high burden of diabetes for healthcare costs and their impact on quality of life and management of the disease have triggered the design and introduction of disease management programmes (DMPs) in many countries. The extent to which diabetes patients vary with regard to their

  8. The profile of Brazilian agriculture as source of raw material to obtain organic cosmetics

    Directory of Open Access Journals (Sweden)

    Neila de Paula Pereira

    2017-05-01

    Full Text Available With one of the most notable floras in the world for sustainable research, the Brazilian Amazon region currently counts on financial incentives from the Brazilian Government for private national and foreign businesses. The ongoing implantation of a Biocosmetics Research and Development Network (REDEBIO aims to stimulate research involving natural resources from the Brazilian states that make up the zone defined as “Amazônia Legal”. The objective of this region, still under development in Brazil, is principally to aggregate value to products manufactured in small local industries through the use of sustainable technology currently being established. Certain certified raw materials already included in the country’s sustainability program, have also begun to be cultivated according to the requirements of organic cultivation (Neves, 2009. The majority are species of Amazonian vegetation: Euterpe oleracea (Açai, Orbignya martiana (Babaçu, Theobroma grandi-florum (Cupuaçu, Carapas guianensis (Andiroba, Pentaclethra macroloba (Pracaxi, Copaifera landesdorffi (Copaiba, Platonia insignis (Bacuri, Theobroma cacao (Cacao, Virola surinamensis (Ucuuba and Bertholletia excelsa (Brazil nut. These generate phytopreparations, such as oils, extracts, and dyes that are widely used in the manufacture of Brazilian organic cosmetics with scientifically proven topical and capillary benefits. In the final balance, Brazilian organic cosmetics should continue to gain force over the next few years, especially with the regulation of the organic cosmetics market that is being drafted by the Brazilian Ministry of Agriculture. Moreover, lines of ecologically aware products that provide quality of life for both for rural and metropolitan communities show a tendency to occupy greater space in the market.

  9. New method in obtaining correction factor of power confirming

    International Nuclear Information System (INIS)

    Deng Yongjun; Li Rundong; Liu Yongkang; Zhou Wei

    2010-01-01

    Westcott theory is the most widely used method in reactor power calibration, which particularly suited to research reactor. But this method is very fussy because lots of correction parameters which rely on empirical formula to special reactor type are needed. The incidence coefficient between foil activity and reactor power was obtained by Monte-Carlo calculation, which was carried out with precise description of the reactor core and the foil arrangement position by MCNP input card. So the reactor power was determined by the core neutron fluence profile and the foil activity placed in the position for normalization use. The characteristic of this new method is simpler, more flexible and accurate than Westcott theory. In this paper, the results of SPRR-300 obtained by the new method in theory were compared with the experimental results, which verified the possibility of this new method. (authors)

  10. U.S. independent operators step up exploration, development abroad

    International Nuclear Information System (INIS)

    Koen, A.D.

    1996-01-01

    This paper reviews the new trend of independent oil and gas operation expenditures in overseas development. It compares recent trends in production, production revenues, and exploration and development expenditures in both the US and non-US markets. It identifies numerous development projects going on in China, Columbia, Australia, Algeria, and others. It documents the production revenues from the overseas fields compared to the returns on US production. It also documents many of the advantages that the independents have over the major companies to obtain a competitive edge on developments in these regions. A historical perspective is also given which tracks the gradual changes of the way which independents operate

  11. Global mapping of vertical injection profiles of wild-fire emission

    Science.gov (United States)

    Sofiev, M.; Vankevich, R.; Ermakova, T.; Hakkarainen, J.

    2012-08-01

    A problem of a characteristic vertical profile of smoke released from wild-land fires is considered. A methodology for bottom-up evaluation of this profile is suggested and a corresponding global dataset is calculated. The profile estimation is based on: (i) a semi-empirical formula for plume-top height recently suggested by the authors, (ii) MODIS satellite observations of active wild-land fires, and (iii) meteorological conditions evaluated at each fireplace using output of ECMWF weather prediction model. Plumes from all fires recorded globally during two arbitrarily picked years 2001 and 2008 are evaluated and their smoke injection profiles are estimated with a time step of 3 h. The resulting 4-dimensional dataset is split to day- and night-time subsets. Each of the subsets is projected to global grid with resolution 1° × 1° × 500 m, averaged to monthly level, and normalised with total emission. Evaluation of the obtained dataset was performed at several levels. Firstly, the quality of the semi-empirical formula for plume-top computations was evaluated using recent additions to the MISR fire plume-height dataset. Secondly, the obtained maps of injection profiles are compared with another global distribution available from literature. Thirdly, the upper percentiles of the profiles are compared with an independent dataset of space-based lidar CALIOP. Finally, the stability of the calculated profiles with regard to inter-annual variations of the fire activity and meteorological conditions is roughly estimated by comparing the sub-sets for 2001 and 2008.

  12. Obtaining of potassium dicyan-argentate

    International Nuclear Information System (INIS)

    Sattarova, M.A.; Solojenkin, P.M.

    1997-01-01

    This work is devoted to obtaining of potassium dicyan-argentate. By means of exchange reaction between silver nitrate and potassium cyanide the potassium dicyan-argentate was synthesized. The analysis of obtained samples was carried out by means of titration and potentiometry.

  13. Treating shale oil to obtain sulfonates

    Energy Technology Data Exchange (ETDEWEB)

    Schaeffer, H

    1921-01-21

    The process shows as its principal characteristics: (1) treating the oil with chlorsulfonic acid at a temperature of about 100/sup 0/C; (2) the transformation of the sulfonic acid obtained into salts; (3) as new industrial products, the sulfonates obtained and their industrial application as disinfectants for hides and wood.

  14. Strategies for obtaining unpublished drug trial data

    DEFF Research Database (Denmark)

    Wolfe, Nicole; Gøtzsche, Peter C.; Bero, Lisa Anne

    2013-01-01

    Authors of systematic reviews have difficulty obtaining unpublished data for their reviews. This project aimed to provide an in-depth description of the experiences of authors in searching for and gaining access to unpublished data for their systematic reviews, and to give guidance on best...... practices for identifying, obtaining and using unpublished data....

  15. 38 CFR 21.5725 - Obtaining benefits.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Obtaining benefits. 21... benefits. (a) Actions required of the individual. In order to obtain benefits under the educational assistance and subsistence allowance program, an individual must— (1) File a claim for benefits with VA, and...

  16. A novel heuristic method for obtaining S-boxes

    International Nuclear Information System (INIS)

    Chen Guo

    2008-01-01

    An efficient algorithm named chaotic multi-swapping and simulated annealing (CMSSA) for obtaining cryptographically strong 8 x 8 S-boxes is presented. The method is based on chaotic maps and simulated annealing. In addition, cryptographic properties such as bijectivity, strict avalanche criterion, nonlinearity, output bits independence criterion and equiprobable input/output XOR distribution are analyzed in detail for the S-box produced. The results of numerical analysis show that the box has nearly fulfilled the criteria for a cryptographically strong S-box and can effectively resist several attacks

  17. RIPE [robot independent programming environment]: A robot independent programming environment

    International Nuclear Information System (INIS)

    Miller, D.J.; Lennox, R.C.

    1990-01-01

    Remote manual operations in radiation environments are typically performed very slowly. Sensor-based computer-controlled robots hold great promise for increasing the speed and safety of remote operations; however, the programming of robotic systems has proven to be expensive and difficult. Generalized approaches to robot programming that reuse available software modules and employ programming languages which are independent of the specific robotic and sensory devices being used are needed to speed software development and increase overall system reliability. This paper discusses the robot independent programming environment (RIPE) developed at Sandia National Laboratories (SNL). The RIPE is an object-oriented approach to robot system architectures; it is a software environment that facilitates rapid design and implementation of complex robot systems for diverse applications. An architecture based on hierarchies of distributed multiprocessors provides the computing platform for a layered programming structure that models applications using software objects. These objects are designed to support model-based automated programming of robotic and machining devices, real-time sensor-based control, error handling, and robust communication

  18. Retrieval of vertical wind profiles during monsoon from satellite ...

    Indian Academy of Sciences (India)

    Complex EOF analysis; cloud motion vector winds; wind profiles; retrieval; monsoon. Proc. Indian Acad. Sci. .... The data gaps are removed using simple linear interpolation .... retrieved via standard linear regression using the two independent ...

  19. Halo-independence with quantified maximum entropy at DAMA/LIBRA

    Energy Technology Data Exchange (ETDEWEB)

    Fowlie, Andrew, E-mail: andrew.j.fowlie@googlemail.com [ARC Centre of Excellence for Particle Physics at the Tera-scale, Monash University, Melbourne, Victoria 3800 (Australia)

    2017-10-01

    Using the DAMA/LIBRA anomaly as an example, we formalise the notion of halo-independence in the context of Bayesian statistics and quantified maximum entropy. We consider an infinite set of possible profiles, weighted by an entropic prior and constrained by a likelihood describing noisy measurements of modulated moments by DAMA/LIBRA. Assuming an isotropic dark matter (DM) profile in the galactic rest frame, we find the most plausible DM profiles and predictions for unmodulated signal rates at DAMA/LIBRA. The entropic prior contains an a priori unknown regularisation factor, β, that describes the strength of our conviction that the profile is approximately Maxwellian. By varying β, we smoothly interpolate between a halo-independent and a halo-dependent analysis, thus exploring the impact of prior information about the DM profile.

  20. Obtaining of polycrystalline silicon for semiconductor industry

    International Nuclear Information System (INIS)

    Mukashev, F.; Nauryzbaev, M.; Kolesnikov, B.; Ivanov, Y.

    1996-01-01

    The purpose of the project is to create pilot equipment and optimize the process of obtaining polycrystalline silicon on semi-industrial level. In the past several decades, the historical experience in the developing countries has shown that one of the most promising ways to improve the economy,of a country is to establish semiconductor industry. First of all, the results can help increase defense, national security and create industrial production. The silane method, which has been traditionally' used for obtaining technical and polycrystalline silicon, is to obtain and then to pyrolyzed mono-and poly silanes. Although the traditional methods of obtaining silicon hydrides have specific advantages, such as utilizing by-products, they also have clear shortcomings, i.e. either low output of the ultimate product ( through hydrolysis of Mg 2 Si) or high contents of by-products in it or high contents of dissolving vapors (through decomposing Mg 2 Si in non-water solutions)

  1. Production and characterization of pectinases obtained from ...

    African Journals Online (AJOL)

    Production and characterization of pectinases obtained from Aspergillus fumigatus in submerged fermentation system using pectin extracted from mango peels as carbon source. AL Ezugwu, SOO Eze, FC Chilaka, CU Anyanwu ...

  2. Treatment of biomass to obtain ethanol

    Science.gov (United States)

    Dunson, Jr., James B.; Elander, Richard T [Evergreen, CO; Tucker, III, Melvin P.; Hennessey, Susan Marie [Avondale, PA

    2011-08-16

    Ethanol was produced using biocatalysts that are able to ferment sugars derived from treated biomass. Sugars were obtained by pretreating biomass under conditions of high solids and low ammonia concentration, followed by saccharification.

  3. Silicon dioxide obtained by Polymeric Precursor Method

    International Nuclear Information System (INIS)

    Oliveira, C.T.; Granado, S.R.; Lopes, S.A.; Cavalheiro, A.A.

    2011-01-01

    The Polymeric Precursor Method is able for obtaining several oxide material types with high surface area even obtained in particle form. Several MO 2 oxide types such as titanium, silicon and zirconium ones can be obtained by this methodology. In this work, the synthesis of silicon oxide was monitored by thermal analysis, XRD and surface area analysis in order to demonstrate the influence of the several synthesis and calcining parameters. Surface area values as higher as 370m2/g and increasing in the micropore volume nm were obtained when the material was synthesized by using ethylene glycol as polymerizing agent. XRD analysis showed that the material is amorphous when calcinated at 600°C in despite of the time of calcining, but the material morphology is strongly influenced by the polymeric resin composition. Using Glycerol as polymerizing agent, the pore size increase and the surface area goes down with the increasing in decomposition time, when compared to ethylene glycol. (author)

  4. Process for obtaining cobalt and lanthanum nickelate

    International Nuclear Information System (INIS)

    Tapcov, V.; Samusi, N.; Gulea, A.; Horosun, I.; Stasiuc, V.; Petrenco, P.

    1999-01-01

    The invention relates to the process for obtaining polycrystalline ceramics of cobalt and lanthanum nickelate with the perovskite structure from coordinative hetero metallic compounds. The obtained products can be utilized in the industry in the capacity of catalysts. Summary of the invention consists in obtaining polycrystalline ceramics LaCoO 3 and LaNiO 3 with the perovskite structure by pyrolysis of the parent compounds, namely, the coordinative hetero metallic compounds of the lanthanum cobalt or lanthanum nickel. The pyrolysis of the parent compound runs during one hour at 800 C. The technical result of the invention consists in lowering the temperature of the parent compound pyrolysis containing the precise ratio of metals necessary for ceramics obtaining

  5. Affected pathways and transcriptional regulators in gene expression response to an ultra-marathon trail: Global and independent activity approaches.

    Directory of Open Access Journals (Sweden)

    Maria Maqueda

    Full Text Available Gene expression (GE analyses on blood samples from marathon and half-marathon runners have reported significant impacts on the immune and inflammatory systems. An ultra-marathon trail (UMT represents a greater effort due to its more testing conditions. For the first time, we report the genome-wide GE profiling in a group of 16 runners participating in an 82 km UMT competition. We quantified their differential GE profile before and after the race using HuGene2.0st microarrays (Affymetrix Inc., California, US. The results obtained were decomposed by means of an independent component analysis (ICA targeting independent expression modes. We observed significant differences in the expression levels of 5,084 protein coding genes resulting in an overrepresentation of 14% of the human biological pathways from the Kyoto Encyclopedia of Genes and Genomes database. These were mainly clustered on terms related with protein synthesis repression, altered immune system and infectious diseases related mechanisms. In a second analysis, 27 out of the 196 transcriptional regulators (TRs included in the Open Regulatory Annotation database were overrepresented. Among these TRs, we identified transcription factors from the hypoxia-inducible factors (HIF family EPAS1 (p< 0.01 and HIF1A (p<0.001, and others jointly described in the gluconeogenesis program such as HNF4 (p< 0.001, EGR1 (p<0.001, CEBPA (p< 0.001 and a highly specific TR, YY1 (p<0.01. The five independent components, obtained from ICA, further revealed a down-regulation of 10 genes distributed in the complex I, III and V from the electron transport chain. This mitochondrial activity reduction is compatible with HIF-1 system activation. The vascular endothelial growth factor (VEGF pathway, known to be regulated by HIF, also emerged (p<0.05. Additionally, and related to the brain rewarding circuit, the endocannabinoid signalling pathway was overrepresented (p<0.05.

  6. Independent technical review of the Mound Plant

    Energy Technology Data Exchange (ETDEWEB)

    1994-06-01

    This report documents an Independent Technical Review (ITR) of the facilities, organizations, plans, and activities required to transition particular elements of the Mound Plant from Defense Program (DP) funded operation as appropriate either to community developed reuse or safe deactivation leading to decontamination and decommissioning (D&D). The review was conducted at the request of the Dr. Willis Bixby, Deputy Assistant Secretary, U.S. Department of Energy EM-60, Office of Facility Transition and Management and is a consensus of the nine member ITR Team. Information for the review was drawn from documents provided to the ITR Team by the Miamisburg Area Office (MB) of the DOE, EG&G, the City of Miamisburg, and others; and from presentations, discussions, interviews, and facility inspections at the Mound Plant during the weeks of March 14 and March 28, 1994. During the week of April 25, 1994, the ITR Team met at Los Alamos, New Mexico to develop consensus recommendations. A presentation of the core recommendations was made at the Mound Plant on May 5, 1994. This is an independent assessment of information available to, and used by, the Mound Plant personnel. Repetition of the information is not meant to imply discovery by the ITR Team. Team members, however, acting as independent reviewers, frequently assess the information from a perspective that differs significantly from that of the Mound Plant personnel. The report is based on information obtained and conditions observed during the March 1994 review interval. The ITR process and normal site work often initiate rapid, beneficial changes in understanding and organization immediately following the review. These changes frequently alter conditions observed during the review, but the report does not address changes subsequent to the review interval.

  7. Independent EEG sources are dipolar.

    Directory of Open Access Journals (Sweden)

    Arnaud Delorme

    Full Text Available Independent component analysis (ICA and blind source separation (BSS methods are increasingly used to separate individual brain and non-brain source signals mixed by volume conduction in electroencephalographic (EEG and other electrophysiological recordings. We compared results of decomposing thirteen 71-channel human scalp EEG datasets by 22 ICA and BSS algorithms, assessing the pairwise mutual information (PMI in scalp channel pairs, the remaining PMI in component pairs, the overall mutual information reduction (MIR effected by each decomposition, and decomposition 'dipolarity' defined as the number of component scalp maps matching the projection of a single equivalent dipole with less than a given residual variance. The least well-performing algorithm was principal component analysis (PCA; best performing were AMICA and other likelihood/mutual information based ICA methods. Though these and other commonly-used decomposition methods returned many similar components, across 18 ICA/BSS algorithms mean dipolarity varied linearly with both MIR and with PMI remaining between the resulting component time courses, a result compatible with an interpretation of many maximally independent EEG components as being volume-conducted projections of partially-synchronous local cortical field activity within single compact cortical domains. To encourage further method comparisons, the data and software used to prepare the results have been made available (http://sccn.ucsd.edu/wiki/BSSComparison.

  8. ON INTERSECTIONS OF INDEPENDENT NONDEGENERATE DIFFUSION PROCESSES

    Institute of Scientific and Technical Information of China (English)

    Zhenlong CHEN

    2014-01-01

    Let X(1) = {X(1)(s), s ∈ R+} and X(2) = {X(2)(t), t ∈ R+} be two inde-pendent nondegenerate diffusion processes with values in Rd. The existence and fractal dimension of intersections of the sample paths of X (1) and X (2) are studied. More gener-ally, let E1, E2⊆(0,∞) and F ⊂Rd be Borel sets. A necessary condition and a suffcient condition for P{X(1)(E1)∩X(2)(E2)∩F 6=∅}>0 are proved in terms of the Bessel-Riesz type capacity and Hausdorff measure of E1 × E2 × F in the metric space (R+× R+× Rd,ρb), whereρb is an unsymmetric metric defined in R+× R+× Rd. Under reasonable conditions, results resembling those of Browian motion are obtained.

  9. Deafblind people, communication, independence, and isolation.

    Science.gov (United States)

    Hersh, Marion

    2013-10-01

    This paper discusses issues related to communication, independence, and isolation for an understudied group of deaf people who also have visual impairments. The discussion is based on the experiences of 28 deafblind people in 6 different countries, obtained from interviews that were carried out as part of a larger research project on travel issues. However, the similarities in experiences between countries were stronger than the differences. In particular, barriers to communication and inadequate support, with resulting problems of isolation and depression, were found in all the countries. Equally, deafblind people in all the countries were interested in being involved in and contributing to society and supporting other people, particularly through organizations of blind and deafblind people. This runs counter to the tendency to present deafblind and other disabled people purely as recipients of support rather than also as active participants in society. However, there were some differences in the support available in the different countries.

  10. Very low intensity storage-ring profile monitor

    International Nuclear Information System (INIS)

    Hardek, T.; Kells, W.; Lai, H.

    1981-01-01

    The Fermilab Colliding Beams Group has now accomplished several cooling experiments (electron and stochastic methods) on proton beams in the ''electron cooling'' synchrotron ring built for this purpose. A key to analyzing the performance of any test cooling system is a complete set of beam diagnostics to measure the beam emittances in all three planes. For longitudinal emittance the authors use Schottky scans (although very low intensities make this difficult, necessitating a departure from the conventional method by bunching the beams). A description is given of the MCP telescope and readout which evolved independently as a complete monitor system using residual gas in lieu of Mg vapor. To date all transverse measurements of coasting beam profiles have been obtained in this mode. 2 refs

  11. Modeling of Changing Electrode Profiles

    Energy Technology Data Exchange (ETDEWEB)

    Prentice, Geoffrey Allen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Materials and Molecular Research Division; Univ. of California, Berkeley, CA (United States). Dept. of Chemical Engineering

    1980-12-01

    A model for simulating the transient behavior of solid electrodes undergoing deposition or dissolution has been developed. The model accounts for ohmic drop, charge transfer overpotential, and mass transport limitations. The finite difference method, coupled with successive overrelaxation, was used as the basis of the solution technique. An algorithm was devised to overcome the computational instabilities associated with the calculations of the secondary and tertiary current distributions. Simulations were performed on several model electrode profiles: the sinusoid, the rounded corner, and the notch. Quantitative copper deposition data were obtained in a contoured rotating cylinder system, Sinusoidal cross-sections, machined on stainless steel cylinders, were used as model geometries, Kinetic parameters for use in the simulation were determined from polarization curves obtained on copper rotating cylinders, These parameters, along with other physical property and geometric data, were incorporated in simulations of growing sinusoidal profiles. The copper distributions on the sinusoidal cross-sections were measured and found to compare favorably with the simulated results. At low Wagner numbers the formation of a slight depression at the profile peak was predicted by the simulation and observed on the profile. At higher Wagner numbers, the simulated and experimental results showed that the formation of a depression was suppressed. This phenomenon was shown to result from the competition between ohmic drop and electrode curvature.

  12. Metabolic profiling of meat: assessment of pork hygiene and contamination with Salmonella typhimurium.

    Science.gov (United States)

    Xu, Yun; Cheung, William; Winder, Catherine L; Dunn, Warwick B; Goodacre, Royston

    2011-02-07

    Spoilage in meat is the result of the action of microorganisms and results in changes of meat and microbial metabolism. This process may include pathogenic food poisoning bacteria such as Salmonella typhimurium, and it is important that these are differentiated from the natural spoilage process caused by non-pathogenic microorganisms. In this study we investigated the application of metabolic profiling using gas chromatography-mass spectrometry, to assess the microbial contamination of pork. Metabolite profiles were generated from microorganisms, originating from the natural spoilage process and from the artificial contamination with S. typhimurium. In an initial experiment, we investigated changes in the metabolic profiles over a 72 hour time course at 25 °C and established time points indicative of the spoilage process. A further experiment was performed to provide in-depth analysis of the metabolites characteristic of contamination by S. typhimurium. We applied a three-way PARAllel FACtor analysis 2 (PARAFAC2) multivariate algorithm to model the metabolic profiles. In addition, two univariate statistical tests, two-sample Wilcoxon signed rank test and Friedman test, were employed to identify metabolites which showed significant difference between natural spoiled and S. typhimurium contaminated samples. Consistent results from the two independent experiments were obtained showing the discrimination of the metabolic profiles of the natural spoiled pork chops and those contaminated with S. typhimurium. The analysis identified 17 metabolites of significant interest (including various types of amino acid and fatty acid) in the discrimination of pork contaminated with the pathogenic microorganism.

  13. Role of noise in the diode-laser spectroscopy of the spectral line profile

    International Nuclear Information System (INIS)

    Nadezhdinskii, Aleksandr I; Plotnichenko, V V; Ponurovskii, Ya Ya; Spiridonov, Maksim V

    2000-01-01

    Questions concerning precise measurements of the spectral-line-profile parameters by diode-laser spectroscopic methods were examined. The instrumental function of a distributed-feedback diode laser (λ =1.53 μm), consisting of the additive contributions of the noise due to spontaneous emission, frequency fluctuations, and intensity fluctuations, was investigated. An analytical formula was obtained for the spectrum of the diode-laser field formed by frequency fluctuations. The spectral density g 0 of the frequency fluctuations, determining the width of the central part of the emission line profile of a diode laser, was found by two independent methods (by fitting to a Doppler-broadened absorption line profile and by finding the intensity of the residual radiation and the saturated-absorption line width). The parameters Ω and Γ of the spectral density of the frequency fluctuations, coupled to the relaxation oscillations and determining the wing of the diode-laser emission line profile, were determined experimentally. By taking into account the instrumental function of the diode laser, involving successive convolution with the recorded emission spectra, it was possible to reproduce correctly the spectral line profile and to solve accurately the problem of the 'optical zero'. The role of the correlation between the intensity noise and the diode-laser frequency was considered. (laser applications and other topics in quantum electronics)

  14. Cell Line Derived 5-FU and Irinotecan Drug-Sensitivity Profiles Evaluated in Adjuvant Colon Cancer Trial Data

    DEFF Research Database (Denmark)

    Buhl, Ida Kappel; Gerster, Sarah; Delorenzi, Mauro

    2016-01-01

    patients who benefitted from the addition of irinotecan to 5-FU, we used gene expression profiles based on cell lines and clinical tumor material. These profiles were applied to expression data obtained from pretreatment formalin fixed paraffin embedded (FFPE) tumor tissue from 636 stage III colon cancer...... patients enrolled in the PETACC-3 prospective randomized clinical trial. A 5-FU profile developed similarly was assessed by comparing the PETACC-3 cohort with a cohort of 359 stage II colon cancer patients who underwent surgery but received no adjuvant therapy. RESULTS: There was no statistically...... to identify colon cancer patients who may benefit from 5-FU, however, any biomarker predicting benefit for adjuvant 5-FU must be rigorously evaluated in independent cohorts. Given differences between the two study cohorts, the present results should be further validated....

  15. Diversity of endophytic bacteria of Dendrobium officinale based on culture-dependent and culture-independent methods

    Directory of Open Access Journals (Sweden)

    Cong Pei

    2017-01-01

    Full Text Available Culture-dependent and culture-independent methods were compared and evaluated in the study of the endophytic diversity of Dendrobium officinale. Culture-independent methods consisted of polymerase chain reaction–denaturing gradient gel electrophoresis (PCR-DGGE and metagenome methods. According to the results, differences were found between the three methods. Three phyla, namely Firmicutes, Proteobacteria, and Actinobacteria, were detected using the culture-dependent method, and two phyla, Firmicutes and Proteobacteria, were detected by the DGGE method. Using the metagenome method, four major phyla were determined, including Proteobacteria (76.54%, Actinobacteria (18.56%, Firmicutes (2.27%, and Bacteroidetes (1.56%. A distinct trend was obtained at the genus level in terms of the method and the corresponding number of genera determined. There were 449 genera and 16 genera obtained from the metagenome and DGGE methods, respectively, and only 7 genera were obtained through the culture-dependent method. By comparison, all the genera from the culture-dependent and DGGE methods were contained in the members determined using the metagenome method. Overall, culture-dependent methods are limited to ‘finding’ endophytic bacteria in plants. DGGE is an alternative to investigating primary diversity patterns; however, the metagenome method is still the best choice for determining the endophytic profile in plants. It is essential to use multiphasic approaches to study cultured and uncultured microbes.

  16. On Judicial and Quasi-Judicial Independence

    NARCIS (Netherlands)

    Comtois, Suzanne; de Graaf, K.J.

    2013-01-01

    'Principles of judicial and quasi-judicial independence are fundamental to all democracies and yet, the notion of independence is still elusive. What is judicial and quasi-judicial independence and why is it important? From whom and what are the judiciary and other adjudicators to be independent? Is

  17. FASTQSim: platform-independent data characterization and in silico read generation for NGS datasets.

    Science.gov (United States)

    Shcherbina, Anna

    2014-08-15

    High-throughput next generation sequencing technologies have enabled rapid characterization of clinical and environmental samples. Consequently, the largest bottleneck to actionable data has become sample processing and bioinformatics analysis, creating a need for accurate and rapid algorithms to process genetic data. Perfectly characterized in silico datasets are a useful tool for evaluating the performance of such algorithms. Background contaminating organisms are observed in sequenced mixtures of organisms. In silico samples provide exact truth. To create the best value for evaluating algorithms, in silico data should mimic actual sequencer data as closely as possible. FASTQSim is a tool that provides the dual functionality of NGS dataset characterization and metagenomic data generation. FASTQSim is sequencing platform-independent, and computes distributions of read length, quality scores, indel rates, single point mutation rates, indel size, and similar statistics for any sequencing platform. To create training or testing datasets, FASTQSim has the ability to convert target sequences into in silico reads with specific error profiles obtained in the characterization step. FASTQSim enables users to assess the quality of NGS datasets. The tool provides information about read length, read quality, repetitive and non-repetitive indel profiles, and single base pair substitutions. FASTQSim allows the user to simulate individual read datasets that can be used as standardized test scenarios for planning sequencing projects or for benchmarking metagenomic software. In this regard, in silico datasets generated with the FASTQsim tool hold several advantages over natural datasets: they are sequencing platform independent, extremely well characterized, and less expensive to generate. Such datasets are valuable in a number of applications, including the training of assemblers for multiple platforms, benchmarking bioinformatics algorithm performance, and creating challenge

  18. Worker flag. Independent Electrical Policy

    International Nuclear Information System (INIS)

    Bahen, D.

    2000-01-01

    This work analyses the initiative of privatization of the Mexican Electric Industry and also it is showed the incoherence of this mistaken proposal. Along the same line is analysed tthe situation of the National Electric Sector and the working process for the distinct types of electric generation just as the syndical and labor situations. In consequence it is proposed an Independent Electrical Policy, which includes the integration of the Nationalized Electric Industry, the syndical union and the Unique Collective Contract. The purpose of this work is to contribute to the success of the electrical and nuclear struggle always maintaining in rising position the red flag of the proletariat. The author considers that the privatization means mercantilization of the human necessities. The privatization is not inevitable at condition of to exercise consequently the political actions necessary through alternatives includes: the worker control of production, research, and the National Electric strike. (Author)

  19. Ergodic theory independence and dichotomies

    CERN Document Server

    Kerr, David

    2016-01-01

    This book provides an introduction to the ergodic theory and topological dynamics of actions of countable groups. It is organized around the theme of probabilistic and combinatorial independence, and highlights the complementary roles of the asymptotic and the perturbative in its comprehensive treatment of the core concepts of weak mixing, compactness, entropy, and amenability. The more advanced material includes Popa's cocycle superrigidity, the Furstenberg-Zimmer structure theorem, and sofic entropy. The structure of the book is designed to be flexible enough to serve a variety of readers. The discussion of dynamics is developed from scratch assuming some rudimentary functional analysis, measure theory, and topology, and parts of the text can be used as an introductory course. Researchers in ergodic theory and related areas will also find the book valuable as a reference.

  20. Obtaining of ceramics biphasic dense and porous

    International Nuclear Information System (INIS)

    Pallone, E.M.J.A.; Rigo, E.C.S.; Fraga, A.F.

    2010-01-01

    Among the bioceramic hydroxyapatite (HAP) and beta-tricalcium phosphate (beta-TCP) are materials commonly used in biomedical field. Their combined properties result in a material with absorbable and at the same time with bioactive surface. Called biphasic ceramics such materials respond more quickly when exposed to physiological environment. In this work, powders of HAP/beta-TCP were obtained by chemical precipitation. After obtaining the post-phase was added at a ratio of 0, 15% and 30w% aqueous solutions of corn starch in order to obtain porous bodies. After mixing the resulting solutions were dried, resigned in tablet form and sintered at 1300 deg C. The initial powder was characterized by X-ray diffraction with Rietveld refinement to quantify the phases present. Bodies-of-evidence has been characterized by calculating the bulk density, X-ray diffraction (XRD), scanning electron microscopy and diametral compression. (author)

  1. Organoclays obtaining starting up of clays sodium

    International Nuclear Information System (INIS)

    Silva, M.M. da; Mota, M.F.; Oliveira, G.C. de; Rodrigues, M.G.F.

    2012-01-01

    Clays have several applications in many areas of fields of technology, however, modification of these materials using organic compounds can be performed to obtain further hydrophobic materials, for applications in the adsorption of organic pollutants. This study aimed to analyze the effects of modifying two clays using sodium quaternary ammonium surfactants through ion exchange reaction process, in obtaining organoclays. The samples with sodium and organoclays were characterized by the techniques of X-ray diffraction (XRD), Infrared Spectroscopy in the region (IV), Gravimetric and Differential Thermal Analysis (DTA / TG) and organic adsorption tests. The results show that the process of obtaining organoclay is efficient, and materials have the potential for future applications in removing organic contaminants. (author)

  2. Obtain of uranium concentrates from fertil liquids

    International Nuclear Information System (INIS)

    Narvaez Castillo, W.A.

    1992-01-01

    This research tried to encounter the form to remove uranium from the rock in the best way, for that it was used different process like leaching, extraction, concentration and precipitation. To leach the mineral was chosen basic leaching, using a mixture of carbonate-sodium bicarbonate, this method is more adequated for the basic nature of the mineral. In extraction was used specific uranium ionic interchanges, so was chosen a tertiary amine like Alamina 336. The concentration phase is intimately binding with the extraction by ionic interchange, for the capability of resine's extraction to obtain concentrated liquids. When the liquids were obtained with high concentration of uranium in the same time were purified and then were precipitated, for that we employed a precipitant agent like: Sodium hydroxide, Amonium hydroxide, Magnesium hydroxide, Hydrogen peroxide and phosphates. With all concentrates we obtain the YELLOW CAKE

  3. Profile updating for information systems

    International Nuclear Information System (INIS)

    Abrantes, J.F.

    1983-02-01

    Profiles updating methods were analysed. A method suitable to the characteristics of the system used in the research (SDI/CIN/CNEN) that uses as the selection criterio the threshold and weights criterion, was determined. Relevance weighting theory was described and experiments to verify precision were carried out. The improvements obtained were good nevertheless more significant tests are required to attain more reliable results. (Author) [pt

  4. Enhanced dynamic wedge and independent monitor unit verification

    International Nuclear Information System (INIS)

    Howlett, SJ.

    2005-01-01

    Some serious radiation accidents have occurred around the world during the delivery of radiotherapy treatment. The regrettable incident in Panama clearly indicated the need for independent monitor unit (MU) verification. Indeed the International Atomic Energy Agency (IAEA), after investigating the incident, made specific recommendations for radiotherapy centres which included an independent monitor unit check for all treatments. Independent monitor unit verification is practiced in many radiotherapy centres in developed countries around the world. It is mandatory in USA but not yet in Australia. This paper describes development of an independent MU program, concentrating on the implementation of the Enhanced Dynamic Wedge (EDW) component. The difficult case of non centre of field (COF) calculation points under the EDW was studied in some detail. Results of a survey of Australasian centres regarding the use of independent MU check systems is also presented. The system was developed with reference to MU calculations made by Pinnacle 3 D Radiotherapy Treatment Planning (RTP) system (ADAC - Philips) for 4MV, 6MV and 18MV X-ray beams used at the Newcastle Mater Misericordiae Hospital (NMMH) in the clinical environment. A small systematic error was detected in the equation used for the EDW calculations. Results indicate that COF equations may be used in the non COF situation with similar accuracy to that achieved with profile corrected methods. Further collaborative work with other centres is planned to extend these findings

  5. A bistatic sodar for precision wind profiling in complex terrain

    DEFF Research Database (Denmark)

    Bradley, Stuart; Hünerbein, Sabine Von; Mikkelsen, Torben

    2012-01-01

    A new ground-based wind profiling technology-a scanned bistatic sodar-is described. The motivation for this design is to obtain a "mastlike"wind vector profile in a single atmospheric column extending from the ground to heights of more than 200 m. The need for this columnar profiling arises from ...

  6. Experiments for obtaining field influence mass particles.

    CERN Document Server

    Yahalomi, E

    2010-01-01

    Analyzing time dilation experiments the existence of a universal field interacting with moving mass particles is obtained. It is found that mass particle changes its properties depend on its velocity relative to this universal scalar field and not on its velocity relative to the laboratory. High energy proton momentum, energy and mass were calculated obtaining new results. Experiments in high energy accelerators are suggested as additional proofs for the existence of this universal field. This universal field may explain some results of other high energy experiments.

  7. Study on the chloride diffusion coefficient in concrete obtained in electrically accelerated tests

    NARCIS (Netherlands)

    Spiesz, P.R.; Brouwers, H.J.H.; Gulikers, J.J.W.; Polder, R.; Andrade, C.

    2015-01-01

    This study presents an analysis of the chloride diffusion coefficient (DRCM), obtained in electrically accelerated chloride migration tests. As demonstrated here, the obtained chloride diffusion coefficient does not represent the apparent one, as it is independent of chloride binding. This is

  8. Non-Newtonian flow between concentric cylinders calculated from thermophysical properties obtained from simulations

    International Nuclear Information System (INIS)

    Narayan, A.P.; Rainwater, J.C.; Hanley, H.J.M.

    1995-01-01

    A study of the Weissenberg effect (rod climbing in a stirred system) based on nonequilibrium molecular dynamics (NEMD) is reported. Simulation results from a soft-sphere fluid are used to obtain a self-consistent free-surface profile of the fluid of finite compressibility undergoing Couette flow between concentric cylinders. A numerical procedure is then applied to calculate the height profile for a hypothetical fluid with thermophysical properties of the soft-sphere liquid and of a dense colloidal suspension. The height profile calculated is identified with shear thickening and the forms of the viscometric functions. The maximum climb occurs between the cylinders rather than at the inner cylinder

  9. Obtaining the Andersen's chart, triangulation algorithm

    DEFF Research Database (Denmark)

    Sabaliauskas, Tomas; Ibsen, Lars Bo

    Andersen’s chart (Andersen & Berre, 1999) is a graphical method of observing cyclic soil response. It allows observing soil response to various stress amplitudes that can lead to liquefaction, excess plastic deformation or stabilizing soil response. The process of obtaining the original chart has...

  10. Purification of alcohol obtained from molasses

    Energy Technology Data Exchange (ETDEWEB)

    Visnevskaya, G L; Egorov, A S; Sokol' skaya, E V

    1960-01-01

    A study of the composition of alcohol liquids on different plates of a fractionation column of indirect action during purification of alcohol obtained from normal and defective molasses, and from starch raw material, showed that there were two local strength minima in the lower part of the column and on the plates (adjacent and feed). Aldehydes behaved as a typical head impurity; a noticeable increase in their concentration occurred only on the highest plates in the fractionation column. In the zone of the column containing liquids of a strength of 86 to 94% alcohol by weight a sharply pronounced local maximum of ester accumulation were observed, provisionally designated as intermediate, whose presence is apparently one of the causes of the specific sharp taste of alcohol obtained from molasses. These esters hinder the obtaining of high-grade alcohols which are standard in respect to ester content and oxidizability test. Reduction with 0.05N KMnO/sub 4/ occurs most rapidly with alcohol liquids in the zone of ester accumulation; purification of alcohols obtained from grain and potato raw material resulted in no zones of ester accumulation in the column.

  11. Obtaining shale distillate free from sulphur

    Energy Technology Data Exchange (ETDEWEB)

    Heyl, G E

    1917-09-14

    A process whereby, from sulfur-containing shale, products free from sulfur may be obtained, consisting of mixing with the finely ground shale a portion of iron salts containing sufficient metal to unite with all the sulfur in the shale and form sulfide therewith, grinding the mixture to a fine state of subdivision and subsequently subjecting it to destructive distillation.

  12. Obtaining a minimal set of rewrite rules

    CSIR Research Space (South Africa)

    Davel, M

    2005-11-01

    Full Text Available In this paper the authors describe a new approach to rewrite rule extraction and analysis, using Minimal Representation Graphs. This approach provides a mechanism for obtaining the smallest possible rule set – within a context-dependent rewrite rule...

  13. Obtainment of tantalum oxide from national ores

    International Nuclear Information System (INIS)

    Pinatti, D.G.; Ribeiro, S.; Martins, A.H.

    1988-01-01

    The experimental results of tantalum oxides (Ta 2 O 5 ) obtainment from Brazilian ores of tantalite and columbite are described. This study is a part of the technologic and scientific research design of refractory metals (Ti, Zr, Hf, V, Nb, Ta, Cr, Mo and W) and correlate ceramics. (C.G.C.) [pt

  14. Isolation and characterization of microcrystalline cellulose obtained ...

    African Journals Online (AJOL)

    In this study, microcrystalline cellulose, coded MCC-PNF, was obtained from palm nut (Elaeis guineensis) fibres. MCC-PNF was examined for its physicochemical and powder properties. The powder properties of MCC-PNF were compared to those of the best commercial microcrystalline cellulose grade, Avicel PH 101.

  15. 47 CFR 54.615 - Obtaining services.

    Science.gov (United States)

    2010-10-01

    ... provided under § 54.621, that the requester cannot obtain toll-free access to an Internet service provider... thing of value; (6) If the service or services are being purchased as part of an aggregated purchase... submitted and select the most cost-effective alternative. (b) Receiving supported rate. Except with regard...

  16. Graviton propagator from background-independent quantum gravity.

    Science.gov (United States)

    Rovelli, Carlo

    2006-10-13

    We study the graviton propagator in Euclidean loop quantum gravity. We use spin foam, boundary-amplitude, and group-field-theory techniques. We compute a component of the propagator to first order, under some approximations, obtaining the correct large-distance behavior. This indicates a way for deriving conventional spacetime quantities from a background-independent theory.

  17. HOPWA Performance Profiles

    Data.gov (United States)

    Department of Housing and Urban Development — HOPWA Performance Profiles are generated quarterly for all agencies receiving HOPWA formula or competitive grants. Performance Profiles are available at the national...

  18. Model-independent Exoplanet Transit Spectroscopy

    Science.gov (United States)

    Aronson, Erik; Piskunov, Nikolai

    2018-05-01

    We propose a new data analysis method for obtaining transmission spectra of exoplanet atmospheres and brightness variation across the stellar disk from transit observations. The new method is capable of recovering exoplanet atmosphere absorption spectra and stellar specific intensities without relying on theoretical models of stars and planets. We simultaneously fit both stellar specific intensity and planetary radius directly to transit light curves. This allows stellar models to be removed from the data analysis. Furthermore, we use a data quality weighted filtering technique to achieve an optimal trade-off between spectral resolution and reconstruction fidelity homogenizing the signal-to-noise ratio across the wavelength range. Such an approach is more efficient than conventional data binning onto a low-resolution wavelength grid. We demonstrate that our analysis is capable of reproducing results achieved by using an explicit quadratic limb-darkening equation and that the filtering technique helps eliminate spurious spectral features in regions with strong telluric absorption. The method is applied to the VLT FORS2 observations of the exoplanets GJ 1214 b and WASP-49 b, and our results are in agreement with previous studies. Comparisons between obtained stellar specific intensity and numerical models indicates that the method is capable of accurately reconstructing the specific intensity. The proposed method enables more robust characterization of exoplanetary atmospheres by separating derivation of planetary transmission and stellar specific intensity spectra (that is model-independent) from chemical and physical interpretation.

  19. Believing is seeing? Investigating the perceived accuracy of criminal psychological profiles.

    Science.gov (United States)

    Kocsis, Richard N; Hayes, Andrew F

    2004-04-01

    This study investigated whether perceptions of criminal psychological profiles are influenced by the identity of the profile's author. Police officers were given a profile they were told was written by either a professional profiler or by an unspecified author. When judged in relation to the actual perpetrator of the crime, police officers tended to perceive greater accuracy in a profile when it was labeled as authored by a professional profiler independent of the actual content of the profile. But officers' judgments of the usefulness of the profile were not affected by knowledge of who wrote the profile. Explanations for this result focus on the ambiguous nature of criminal profiles and how this ambiguity enhances the likelihood that beliefs about the validity of profiling can color perceptions of the content of the profile.

  20. Obtain and characterization of chitosan / propranolol microparticles by spray drying

    International Nuclear Information System (INIS)

    Nascimento, Ednaldo G. do; Silva Junior, Arnobio A. da; Santos, Katia S.C.R. dos

    2015-01-01

    The study investigated the application of chitosan microparticles as carriers into hard gelatin capsule containing propranolol, evaluating the variability of the molecular weight and the chitosan particles by spray drying. The formulations were characterized by average weight, dosing unit dose uniformity and dissolution profile according to the pharmacopoeia. While the microparticles were characterized by Fourier transformed infrared spectroscopy, scanning electron microscopy and X-ray diffraction. The results showed that chitosan microparticles obtained without the drug and then physically mixed with propranolol promoted a modified release 85% of the drug after 5 hours. While, chitosan microparticles sprayed with propranolol released only 55% at 5 hours is presented both as a modified release system. Samples of dried chitosan showed up amorphous and homogeneous and spherical morphology. (author)

  1. Different commercial yeast strains affecting the volatile and sensory profile of cava base wine.

    Science.gov (United States)

    Torrens, Jordi; Urpí, Pilar; Riu-Aumatell, Montserrat; Vichi, Stefania; López-Tamames, Elvira; Buxaderas, Susana

    2008-05-10

    36 semi-industrial fermentations were carried out with 6 different yeast strains in order to assess differences in the wines' chemical and volatile profile. Two of the tested strains (Y3 and Y6) showed the fastest fermentation rates throughout 3 harvests and on 2 grape varieties. The wines fermented by three of the tested strains (Y5, Y3 and Y4) stand out for their high amounts of esters and possessed the highest fruity character. Wines from strains producing low amounts of esters and high concentrations of medium chain fatty acids, higher alcohols and six-carbon alcohols were the least appreciated at the sensory analysis. The data obtained in the present study show how the yeast strain quantitatively affects the final chemical and volatile composition of cava base wines and have repercussions on their sensory profile, independently of must variety and harvest year.

  2. Superconductive ceramics obtained with sol gel method

    International Nuclear Information System (INIS)

    Arcangeli, A.; Mosci, A.; Nardi, A.; Vatteroni, R.; Zondini, C.

    1988-01-01

    Several sol gel routes have been considered, studied and developed to produce large quantities of granulates which can be processed to obtain ceramics having good superconducting characteristics. In the considered process a mixture of commercial nitrates is atomized, at room temperature, in a solution 1:1 of Primene JMT and Benzene and a pale blue gel of the starting elements is suddently formed. The granulates obtained are free flowing, very reactive and well suited for pressing. For their intrinsic characteristics they could be very good precursors for the production of large quantities of superconductive ceramics in different forms. The precipitated gel is dried, calcinated, pressed in the form of cylindrical pellets which are sintered up to 960 degrees C. No griding or different thermal treatments are needed. The sintered material has low electric resistence, shows a clear Meissner effect and has a transition temperature of between 91 and 95 K

  3. Acoustic barriers obtained from industrial wastes.

    Science.gov (United States)

    Garcia-Valles, M; Avila, G; Martinez, S; Terradas, R; Nogués, J M

    2008-07-01

    Acoustic pollution is an environmental problem that is becoming increasingly more important in our society. Likewise, the accumulation of generated waste and the need for waste management are also becoming more and more pressing. In this study we describe a new material--called PROUSO--obtained from industrial wastes. PROUSO has a variety of commercial and engineering, as well as building, applications. The main raw materials used for this environmentally friendly material come from slag from the aluminium recycling process, dust from the marble industry, foundry sands, and recycled expanded polystyrene from recycled packaging. Some natural materials, such as plastic clays, are also used. To obtain PROUSO we used a conventional ceramic process, forming new mineral phases and incorporating polluted elements into the structure. Its physical properties make PROUSO an excellent acoustic and thermal insulation material. It absorbs 95% of the sound in the frequency band of the 500 Hz. Its compressive strength makes it ideal for use in ceramic wall building.

  4. Processing of hydroxyapatite obtained by combustion synthesis

    International Nuclear Information System (INIS)

    Canillas, M.; Rivero, R.; García-Carrodeguas, R.; Barba, F.; Rodríguez, M.A.

    2017-01-01

    One of the reasons of implants failure are the stress forces appearing in the material–tissue interface due to the differences between their mechanical properties. For this reason, similar mechanical properties to the surrounding tissue are desirable. The synthesis of hydroxyapatite by solution combustion method and its processing have been studied in order to obtain fully dense ceramic bodies with improved mechanical strength. Combustion synthesis provides nanostructured powders characterized by a high surface area to facilitate the following sintering. Moreover, synthesis was conducted in aqueous and oxidizing media. Oxidizing media improve homogenization and increase the energy released during combustion. It gives rise to particles whose morphology and size suggest lower surface energies compared with aqueous media. The obtained powders were sintered by using a controlled sintering rate schedule. Lower surfaces energies minimize the shrinkage during sintering and relative densities measurements and diametral compression test confirm improved densification and consequently mechanical properties. [es

  5. Process for obtaining luminescent glass layers

    International Nuclear Information System (INIS)

    Heindi, R.; Robert, A.

    1984-01-01

    Process for obtaining luminescent glass layers, application to the production of devices provided with said layers and to the construction of photoscintillators. The process comprises projecting onto a support, by cathodic sputtering, the material of at least one target, each target including silica and at least one chemical compound able to give luminescent centers, such as a cerium oxide, so as to form at least one luminescent glass layer of the said support. The layer or layers formed preferably undergo a heat treatment such as annealing in order to increase the luminous efficiency thereof. It is in this way possible to form a scintillating glass layer on the previously frosted entrance window of a photomultiplier in order to obtain an integrated photoscintillator

  6. Processing of hydroxyapatite obtained by combustion synthesis

    Directory of Open Access Journals (Sweden)

    M. Canillas

    2017-09-01

    Full Text Available One of the reasons of implants failure are the stress forces appearing in the material–tissue interface due to the differences between their mechanical properties. For this reason, similar mechanical properties to the surrounding tissue are desirable. The synthesis of hydroxyapatite by solution combustion method and its processing have been studied in order to obtain fully dense ceramic bodies with improved mechanical strength. Combustion synthesis provides nanostructured powders characterized by a high surface area to facilitate the following sintering. Moreover, synthesis was conducted in aqueous and oxidizing media. Oxidizing media improve homogenization and increase the energy released during combustion. It gives rise to particles whose morphology and size suggest lower surface energies compared with aqueous media. The obtained powders were sintered by using a controlled sintering rate schedule. Lower surfaces energies minimize the shrinkage during sintering and relative densities measurements and diametral compression test confirm improved densification and consequently mechanical properties.

  7. Independent center, independent electron approximation for dynamics of molecules and clusters

    International Nuclear Information System (INIS)

    McGuire, J.H.; Straton, J.C.; Wang, J.; Wang, Y.D.; Weaver, O.L.; Corchs, S.E.; Rivarola, R.D.

    1996-01-01

    A formalism is developed for evaluating probabilities and cross sections for multiple-electron transitions in scattering of molecules and clusters by charged collision partners. First, the molecule is divided into subclusters each made up of identical centers (atoms). Within each subcluster coherent scattering from identical centers may lead to observable phase terms and a geometrical structure factor. Then, using a mean field approximation to describe the interactions between centers we obtain A I ∼ summation k product ke iδ k I A Ik . Second, the independent electron approximation for each center may be obtained by neglecting the correlation between electrons in each center. The probability amplitude for each center is then a product of single electron transition probability amplitudes, a Ik i , i.e. A Ik ≅ product iaik i . Finally, the independent subcluster approximation is introduced by neglecting the interactions between different subclusters in the molecule or cluster. The total probability amplitude then reduces to a simple product of amplitudes for each subcluster, A≅ product IAI . Limitations of this simple approximation are discussed. copyright 1996 American Institute of Physics

  8. Process for obtaining ammonium uranyl tri carbonate

    International Nuclear Information System (INIS)

    Santos, L.R. dos; Riella, H.G.

    1992-01-01

    The procedure adopted for obtaining Ammonium Uranyl Carbonate (AUC) from uranium hexafluoride (U F 6 ) in a aqueous solutions of ammonium hydrogen carbonate is described in this work. The precipitation is made in temperature and pH controlled. This process consists of three steps: evaporation of U F 6 , AUC precipitation and filtration of the AUC slurry. An attempt is made of correlate the parameters involved in the precipitation process of AUC with its and U O 2 characteristics. (author)

  9. Superconducting materials fabrication process and materials obtained

    International Nuclear Information System (INIS)

    Lafon, M.O.; Magnier, C.

    1989-01-01

    The preparation process of a fine powder of YBaCuO type superconductors of easy sintering comprises: mixing in presence of alcohol an aqueous solution of rare earth nitrate or acetate, alkaline earth nitrate or acetate and copper nitrate or acetate and an oxalic acid solution, the pH value of the mixture is comprised between 2 and 4, the obtained precipitate is separated, dried, calcined and eventually crushed [fr

  10. PULP OBTAINING METHOD FOR PACKAGE PRODUCTION

    Directory of Open Access Journals (Sweden)

    V. V. Kuzmich

    2015-01-01

    Full Text Available The paper presents a new method for obtaining pulp which is used for production of cardboard, paper and package while using carbon dioxide and hydrazine hydrate and neutral-sulfite  shive cooking. Output increase of  the desired product can be explained by reduction in destruction of plant raw material carbohydrates during its cooking process. Quality improvement of the desired product (improvement in bleaching and output is attributed to the fact that usage of carbon dioxide and hydrazine contributes to provision of polysaccharide chain resistance to destruction due to the presence of  end links having structure of metasaccharinic and aldonic acids.The author has developed a new method for pulp obtaining on the basis of the executed investigations  and literature data.  СО2 and hydrazine hydrate have been used for obtaining pulp. Method invention concerns pulp obtaining and it can be used for paper and cardboard package manufacturing in pulp and paper industry.The method is to be carried in the following way: pulp-containing plant raw material is loaded into an autoclave and then aqua solution of sodium monosulfite containing hydrazine hydrate that constitutes 4–5 % of absolute dry pulp-containing raw material mass with liquid module 1:6–1:8 is supplied into the autoclave. The autoclave is closed for operation under pressure and the solution is carbonated under pressure which constitutes 5–8 % of absolute dry plant raw material (shover. Temperature is subsequently raised up to 180 °С in the space of 2 hours and cooking is carried out in the course of 4 hours. Usage of  the proposed method for shover cooking makes it possible to reduce monosulfite cooking process and improve qualitative characteristics and output of the desired product.  In addition to above mentioned fact there is a possibility to improve bleaching and final product output. 

  11. Lifetime obtained by ion beam assisted deposition

    Energy Technology Data Exchange (ETDEWEB)

    Chakaroun, M. [XLIM-MINACOM-UMR 6172, Faculte des Sciences et Techniques, 123 av. Albert Thomas, 87060 Limoges cedex (France); Antony, R. [XLIM-MINACOM-UMR 6172, Faculte des Sciences et Techniques, 123 av. Albert Thomas, 87060 Limoges cedex (France)], E-mail: remi.antony@unilim.fr; Taillepierre, P.; Moliton, A. [XLIM-MINACOM-UMR 6172, Faculte des Sciences et Techniques, 123 av. Albert Thomas, 87060 Limoges cedex (France)

    2007-09-15

    We have fabricated green organic light-emitting diodes based on tris-(8-hydroxyquinoline)aluminium (Alq3) thin films. In order to favor the charge carriers transport from the anode, we have deposited a N,N'-diphenyl-N,N'-bis (3-methylphenyl)-1,1'-diphenyl-4,4'-diamine (TPD) layer (hole transport layer) on a ITO anode. Cathode is obtained with a calcium layer covered with a silver layer. This silver layer is used to protect the other layers against oxygen during the OLED use. All the depositions are performed under vacuum and the devices are not exposed to air during their realisation. In order to improve the silver layer characteristics, we have realized this layer with the ion beam assisted deposition process. The aim of this process is to densify the layer and then reduce the permeation of H{sub 2}O and O{sub 2}. We have used argon ions to assist the silver deposition. All the OLEDs optoelectronic characterizations (I = f(V), L = f(V)) are performed in the ambient air. We compare the results obtained with the assisted layer with those obtained with a classical cathode realized by thermal unassisted evaporation. We have realized lifetime measurements in the ambient air and we discuss about the assisted layer influence on the OLEDs performances.

  12. Independent calculation of monitor units for VMAT and SPORT

    International Nuclear Information System (INIS)

    Chen, Xin; Bush, Karl; Ding, Aiping; Xing, Lei

    2015-01-01

    Purpose: Dose and monitor units (MUs) represent two important facets of a radiation therapy treatment. In current practice, verification of a treatment plan is commonly done in dose domain, in which a phantom measurement or forward dose calculation is performed to examine the dosimetric accuracy and the MU settings of a given treatment plan. While it is desirable to verify directly the MU settings, a computational framework for obtaining the MU values from a known dose distribution has yet to be developed. This work presents a strategy to calculate independently the MUs from a given dose distribution of volumetric modulated arc therapy (VMAT) and station parameter optimized radiation therapy (SPORT). Methods: The dose at a point can be expressed as a sum of contributions from all the station points (or control points). This relationship forms the basis of the proposed MU verification technique. To proceed, the authors first obtain the matrix elements which characterize the dosimetric contribution of the involved station points by computing the doses at a series of voxels, typically on the prescription surface of the VMAT/SPORT treatment plan, with unit MU setting for all the station points. An in-house Monte Carlo (MC) software is used for the dose matrix calculation. The MUs of the station points are then derived by minimizing the least-squares difference between doses computed by the treatment planning system (TPS) and that of the MC for the selected set of voxels on the prescription surface. The technique is applied to 16 clinical cases with a variety of energies, disease sites, and TPS dose calculation algorithms. Results: For all plans except the lung cases with large tissue density inhomogeneity, the independently computed MUs agree with that of TPS to within 2.7% for all the station points. In the dose domain, no significant difference between the MC and Eclipse Anisotropic Analytical Algorithm (AAA) dose distribution is found in terms of isodose contours

  13. Independent calculation of monitor units for VMAT and SPORT

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xin; Bush, Karl; Ding, Aiping; Xing, Lei, E-mail: lei@stanford.edu [Department of Radiation Oncology, Stanford University, Stanford, California 94305 (United States)

    2015-02-15

    Purpose: Dose and monitor units (MUs) represent two important facets of a radiation therapy treatment. In current practice, verification of a treatment plan is commonly done in dose domain, in which a phantom measurement or forward dose calculation is performed to examine the dosimetric accuracy and the MU settings of a given treatment plan. While it is desirable to verify directly the MU settings, a computational framework for obtaining the MU values from a known dose distribution has yet to be developed. This work presents a strategy to calculate independently the MUs from a given dose distribution of volumetric modulated arc therapy (VMAT) and station parameter optimized radiation therapy (SPORT). Methods: The dose at a point can be expressed as a sum of contributions from all the station points (or control points). This relationship forms the basis of the proposed MU verification technique. To proceed, the authors first obtain the matrix elements which characterize the dosimetric contribution of the involved station points by computing the doses at a series of voxels, typically on the prescription surface of the VMAT/SPORT treatment plan, with unit MU setting for all the station points. An in-house Monte Carlo (MC) software is used for the dose matrix calculation. The MUs of the station points are then derived by minimizing the least-squares difference between doses computed by the treatment planning system (TPS) and that of the MC for the selected set of voxels on the prescription surface. The technique is applied to 16 clinical cases with a variety of energies, disease sites, and TPS dose calculation algorithms. Results: For all plans except the lung cases with large tissue density inhomogeneity, the independently computed MUs agree with that of TPS to within 2.7% for all the station points. In the dose domain, no significant difference between the MC and Eclipse Anisotropic Analytical Algorithm (AAA) dose distribution is found in terms of isodose contours

  14. Systems analysis-independent analysis and verification

    Energy Technology Data Exchange (ETDEWEB)

    Badin, J.S.; DiPietro, J.P. [Energetics, Inc., Columbia, MD (United States)

    1995-09-01

    The DOE Hydrogen Program is supporting research, development, and demonstration activities to overcome the barriers to the integration of hydrogen into the Nation`s energy infrastructure. Much work is required to gain acceptance of hydrogen energy system concepts and to develop them for implementation. A systems analysis database has been created that includes a formal documentation of technology characterization profiles and cost and performance information. Through a systematic and quantitative approach, system developers can understand and address important issues and thereby assure effective and timely commercial implementation. This project builds upon and expands the previously developed and tested pathway model and provides the basis for a consistent and objective analysis of all hydrogen energy concepts considered by the DOE Hydrogen Program Manager. This project can greatly accelerate the development of a system by minimizing the risk of costly design evolutions, and by stimulating discussions, feedback, and coordination of key players and allows them to assess the analysis, evaluate the trade-offs, and to address any emerging problem areas. Specific analytical studies will result in the validation of the competitive feasibility of the proposed system and identify system development needs. Systems that are investigated include hydrogen bromine electrolysis, municipal solid waste gasification, electro-farming (biomass gasifier and PEM fuel cell), wind/hydrogen hybrid system for remote sites, home electrolysis and alternate infrastructure options, renewable-based electrolysis to fuel PEM fuel cell vehicle fleet, and geothermal energy used to produce hydrogen. These systems are compared to conventional and benchmark technologies. Interim results and findings are presented. Independent analyses emphasize quality, integrity, objectivity, a long-term perspective, corporate memory, and the merging of technical, economic, operational, and programmatic expertise.

  15. Spectrally resolved measurements of the terahertz beam profile generated from a two-color air plasma

    DEFF Research Database (Denmark)

    Pedersen, Pernille Klarskov; Zalkovskij, Maksim; Strikwerda, Andrew

    2014-01-01

    Using a THz camera and THz bandpass filters, we measure the frequency - resolved beam profile emitted from a two - color air plasma. We observe a frequency - independent emission angle from the plasma .......Using a THz camera and THz bandpass filters, we measure the frequency - resolved beam profile emitted from a two - color air plasma. We observe a frequency - independent emission angle from the plasma ....

  16. Motivational profiles of medical students: association with study effort, academic performance and exhaustion.

    Science.gov (United States)

    Kusurkar, Rashmi A; Croiset, Gerda; Galindo-Garré, Francisca; Ten Cate, Olle

    2013-06-19

    Students enter the medical study with internally generated motives like genuine interest (intrinsic motivation) and/or externally generated motives like parental pressure or desire for status or prestige (controlled motivation). According to Self-determination theory (SDT), students could differ in their study effort, academic performance and adjustment to the study depending on the endorsement of intrinsic motivation versus controlled motivation. The objectives of this study were to generate motivational profiles of medical students using combinations of high or low intrinsic and controlled motivation and test whether different motivational profiles are associated with different study outcomes. Participating students (N = 844) from University Medical Center Utrecht, the Netherlands, were classified to different subgroups through K-means cluster analysis using intrinsic and controlled motivation scores. Cluster membership was used as an independent variable to assess differences in study strategies, self-study hours, academic performance and exhaustion from study. Four clusters were obtained: High Intrinsic High Controlled (HIHC), Low Intrinsic High Controlled (LIHC), High Intrinsic Low Controlled (HILC), and Low Intrinsic Low Controlled (LILC). HIHC profile, including the students who are interest + status motivated, constituted 25.2% of the population (N = 213). HILC profile, including interest-motivated students, constituted 26.1% of the population (N = 220). LIHC profile, including status-motivated students, constituted 31.8% of the population (N = 268). LILC profile, including students who have a low-motivation and are neither interest nor status motivated, constituted 16.9% of the population (N = 143). Interest-motivated students (HILC) had significantly more deep study strategy (p motivated (LIHC) and low-motivation (LILC) students. The interest-motivated profile of medical students (HILC) is associated with good study hours, deep

  17. Immune Profiling of Premalignant Lesions in Patients With Lynch Syndrome.

    Science.gov (United States)

    Chang, Kyle; Taggart, Melissa W; Reyes-Uribe, Laura; Borras, Ester; Riquelme, Erick; Barnett, Reagan M; Leoni, Guido; San Lucas, F Anthony; Catanese, Maria T; Mori, Federica; Diodoro, Maria G; You, Y Nancy; Hawk, Ernest T; Roszik, Jason; Scheet, Paul; Kopetz, Scott; Nicosia, Alfredo; Scarselli, Elisa; Lynch, Patrick M; McAllister, Florencia; Vilar, Eduardo

    2018-04-16

    Colorectal carcinomas in patients with Lynch syndrome (LS) arise in a background of mismatch repair (MMR) deficiency, display a unique immune profile with upregulation of immune checkpoints, and response to immunotherapy. However, there is still a gap in understanding the pathogenesis of MMR-deficient colorectal premalignant lesions, which is essential for the development of novel preventive strategies for LS. To characterize the immune profile of premalignant lesions from a cohort of patients with LS. Whole-genome transcriptomic analysis using next-generation sequencing was performed in colorectal polyps and carcinomas of patients with LS. As comparator and model of MMR-proficient colorectal carcinogenesis, we used samples from patients with familial adenomatous polyposis (FAP). In addition, a total of 47 colorectal carcinomas (6 hypermutants and 41 nonhypermutants) were obtained from The Cancer Genome Atlas (TCGA) for comparisons. Samples were obtained from the University of Texas MD Anderson Cancer Center and "Regina Elena" National Cancer Institute, Rome, Italy. All diagnoses were confirmed by genetic testing. Polyps were collected at the time of endoscopic surveillance and tumors were collected at the time of surgical resection. The data were analyzed from October 2016 to November 2017. Assessment of the immune profile, mutational signature, mutational and neoantigen rate, and pathway enrichment analysis of neoantigens in LS premalignant lesions and their comparison with FAP premalignant lesions, LS carcinoma, and sporadic colorectal cancers from TCGA. The analysis was performed in a total of 28 polyps (26 tubular adenomas and 2 hyperplastic polyps) and 3 early-stage LS colorectal tumors from 24 patients (15 [62%] female; mean [SD] age, 48.12 [15.38] years) diagnosed with FAP (n = 10) and LS (n = 14). Overall, LS polyps presented with low mutational and neoantigen rates but displayed a striking immune activation profile characterized by CD4 T cells

  18. Spectral backward radiation profile

    International Nuclear Information System (INIS)

    Kwon, Sung Duck; Lee, Keun Hyun; Kim, Bo Ra; Yoon, Suk Soo

    2004-01-01

    Ultrasonic backward radiation profile is frequency-dependent when incident region has deptional gradient of acoustical properties or multi-layers. Until now, we have measured the profiles of principal frequencies of used transducers so that it was not easy to understand the change of the frequency component and spectrum of backward radiation from the profile. We tried to measure the spectral backward radiation profiles using DFP(digital filer package) Lecroy DSO. The very big changes in the shape and pattern of spectral backward radiation profiles leads to the conclusion that this new try could be very effective tool to evaluate frequency dependent surface area.

  19. Density profiles in the Scrape-Off Layer interpreted through filament dynamics

    Science.gov (United States)

    Militello, Fulvio

    2017-10-01

    We developed a new theoretical framework to clarify the relation between radial Scrape-Off Layer density profiles and the fluctuations that generate them. The framework provides an interpretation of the experimental features of the profiles and of the turbulence statistics on the basis of simple properties of the filaments, such as their radial motion and their draining towards the divertor. L-mode and inter-ELM filaments are described as a Poisson process in which each event is independent and modelled with a wave function of amplitude and width statistically distributed according to experimental observations and evolving according to fluid equations. We will rigorously show that radially accelerating filaments, less efficient parallel exhaust and also a statistical distribution of their radial velocity can contribute to induce flatter profiles in the far SOL and therefore enhance plasma-wall interactions. A quite general result of our analysis is the resiliency of this non-exponential nature of the profiles and the increase of the relative fluctuation amplitude towards the wall, as experimentally observed. According to the framework, profile broadening at high fueling rates can be caused by interactions with neutrals (e.g. charge exchange) in the divertor or by a significant radial acceleration of the filaments. The framework assumptions were tested with 3D numerical simulations of seeded SOL filaments based on a two fluid model. In particular, filaments interact through the electrostatic field they generate only when they are in close proximity (separation comparable to their width in the drift plane), thus justifying our independence hypothesis. In addition, we will discuss how isolated filament motion responds to variations in the plasma conditions, and specifically divertor conditions. Finally, using the theoretical framework we will reproduce and interpret experimental results obtained on JET, MAST and HL-2A.

  20. Simulation of Profiles Data For Computed Tomography Using Object Images

    International Nuclear Information System (INIS)

    Srisatit, Somyot

    2007-08-01

    Full text: It is necessary to use a scanning system to obtain the profiles data for computed tomographic images. A good profile data can give a good contrast and resolution. For the scanning system, high efficiency and high price of radiation equipments must be used. So, the simulated profiles data to obtain a good CT images quality as same as the real one for the demonstration can be used

  1. Electronic Nose Breathprints Are Independent of Acute Changes in Airway Caliber in Asthma

    Directory of Open Access Journals (Sweden)

    Jan van der Maten

    2010-10-01

    Full Text Available Molecular profiling of exhaled volatile organic compounds (VOC by electronic nose technology provides breathprints that discriminate between patients with different inflammatory airway diseases, such as asthma and COPD. However, it is unknown whether this is determined by differences in airway caliber. We hypothesized that breathprints obtained by electronic nose are independent of acute changes in airway caliber in asthma. Ten patients with stable asthma underwent methacholine provocation (Visit 1 and sham challenge with isotonic saline (Visit 2. At Visit 1, exhaled air was repetitively collected pre-challenge, after reaching the provocative concentration (PC20 causing 20% fall in forced expiratory volume in 1 second (FEV1 and after subsequent salbutamol inhalation. At Visit 2, breath was collected pre-challenge, post-saline and post-salbutamol. At each occasion, an expiratory vital capacity was collected after 5 min of tidal breathing through an inspiratory VOC-filter in a Tedlar bag and sampled by electronic nose (Cyranose 320. Breathprints were analyzed with principal component analysis and individual factors were compared with mixed model analysis followed by pairwise comparisons. Inhalation of methacholine led to a 30.8 ± 3.3% fall in FEV1 and was followed by a significant change in breathprint (p = 0.04. Saline inhalation did not induce a significant change in FEV1, but altered the breathprint (p = 0.01. However, the breathprint obtained after the methacholine provocation was not significantly different from that after saline challenge (p = 0.27. The molecular profile of exhaled air in patients with asthma is altered by nebulized aerosols, but is not affected by acute changes in airway caliber. Our data demonstrate that breathprints by electronic nose are not confounded by the level of airway obstruction.

  2. The gauge-independent QCD effective charge

    International Nuclear Information System (INIS)

    Watson, N.J.

    1997-01-01

    It is shown how the QED concept of a gauge-, scale- and scheme-independent one-loop effective charge can be extended directly at the diagrammatic level to QCD, thus justifying explicitly the ''naive non-abelianization'' prescription used in renormalon calculus. It is first argued that, for on-shell external fields and at the strictly one-loop level, the required gluon self-energy-like function is precisely that obtained from S-matrix elements via the pinch technique. The generalization of the pinch technique to explicitly off-shell processes is then introduced. It is shown how, as a result of a fundamental cancellation among conventional perturbation theory diagrams, encoded in the QCD Ward identities, the pinch technique one-loop gluon self-energy iΠ μν ab (q) remains gauge-independent and universal regardless of the fact that the ''external'' fields in the given process are off-shell. This demonstration involves a simple technique enabling the isolation, in an arbitrary gauge, of iΠ μν ab (q) from subclasses of up to several hundred diagrams at once. Furthermore, it is shown how this one-loop cancellation mechanism iterates for the subclasses of n-loop diagrams containing implicitly the Dyson chains of n one-loop self-energies iΠ μν ab (q). The gauge cancellation required for the Dyson summation of iΠ μν ab (q) is thus demonstrated explicitly in a general class of ghost-free gauges for all orders n. (orig.)

  3. The gauge-independent QCD effective charge

    International Nuclear Information System (INIS)

    Watson, N.J.

    1999-01-01

    It is shown how the QCD concept of a gauge-, scale-and scheme-independent one-loop effective charge can be extended directly at the diagrammatic level to QCD, thus justifying explicitly the 'naive non-abelialization' prescription used in renormalon calculus. It is first argued that, for one-shell external fields and at the strictly one-loop level, the required gluon self-energy-like function is precisely that obtained from S-matrix elements via the pinch technique. The generalization of the pinch technique to explicitly off-shell processes is then introduced. It is shown how, as a result of a fundamental cancellation among conventional perturbation theory diagrams encoded in the QCD Ward identities, the pinch technique one-loop gluon self-energy iΠ μν ab (q) remains gauge-independent and universal regardless of the fact that the 'external' fields in the given process are off-shell. This demonstration involves a simple technique enabling the isolation in a arbitrary gauge, of iΠ μν ab (q) from subclasses of up to several hundreds diagrams at once. Furthermore, it is shown how this one-loop cancellation mechanism iterates for the subclasses of n-loop diagrams containing implicitly the Dyson chains of n-loop self energies iΠ μν ab (q). The gauge cancellation required for the Dyson summation of iΠ μν ab (q) is thus demonstrated explicitly in the class of ghost-free gauges for all orders n. (authors)

  4. Obtaining digital files from radiographic films

    International Nuclear Information System (INIS)

    Lavena, Leonardo B; Romero, Amanda G; Paul, Anibal de; Rocha, Luis A; Rotger, Viviana I; Olivera, Juan M

    2007-01-01

    Digitizing images with low cost off-the-shelf technology arises as an alternative to storage films in developing countries. The objective of this work is to determine a low-cost method to digitize Rx films for educative and remote-consult purposes. To this aim, different ways of digitizing were compared against conventional methods to determine the feasibility to have a simple-low cost method that is quality independent from facilities and operator. Different images from digital photo cameras and scanners (with or without transparency adapter at different resolutions and color depth) were analyzed. We present preliminary results for digitizing Rx films with a fast and simple inexpensive system that capture quality images, and optimal sizes for storage in basic PCs in hospitals, with the possibility of asking for a second opinion via e-mail or through a web-based service. It must be noted that in many cases the only way of communication is via dial-up telephone line

  5. Characterization of Wastewaters obtained from Hatay Tanneries

    Directory of Open Access Journals (Sweden)

    Şana Sungur

    2017-06-01

    Full Text Available The leather tanning industry is one of the most significant pollutants in terms of both conventional and toxic parameters. On the other hand, leather industry has an important economic role both in Turkey and in the World. In this study, wastewater samples were taken from 15 different tanneries in the Hatay Region. Wastewaters obtained from liming process and chromium tanning process was analyzed. Sulfide, chromium (III, chromium (VI, oil and grease, total suspended solids (TSS, organic matters, biochemical oxygen demand (BOD, chemical oxygen demand (COD, pH and alkalinity were determined according to Turkish Standard Methods. The determined averages values belong to wastewaters obtained from liming process were as following: pH 11.71; COD 16821 mg L-1; BOD 4357 mg L-1; TSS 39023 mg L-1; oil and grease 364 mg L-1; S-2 concentration 802 mg L-1; alkalinity 2115 mg L-1. The determined averages values belong to wastewaters obtained from chromium tanning process were also as following: pH 4.23; COD 6740 mg L-1; BOD 377 mg L-1; Cr+3 concentrations 372 mg L-1; Cr+6 concentrations 127 mg L-1; TSS 14553 mg L-1; oil and grease 343 mg L-1. The results of all analyzes were higher than wastewater discharge standards. As a result, it’s necessary to use more effective treatments in order to reduce the negative impacts of leather tanning industry that affect environment, natural water resources and at last human health and welfare.

  6. Propensity for obtaining alcohol through shoulder tapping.

    Science.gov (United States)

    Toomey, Traci L; Fabian, Lindsey E A; Erickson, Darin J; Lenk, Kathleen M

    2007-07-01

    Underage youth often obtain alcohol from adults who illegally provide the alcohol. One method for obtaining alcohol from adults is shoulder tapping, where youth approach an adult outside an alcohol establishment and ask the adult to purchase alcohol for them. The goal of this study was to assess what percentage of the general and youth-targeted adult population approached outside of a convenience/liquor store will agree to purchase and then provide alcohol to individuals who appear under age 21. We conducted 2 waves of pseudo-underage shoulder tap request attempts, using requesters who were age 21 or older but appeared 18 to 20 years old. In both waves, requests were conducted at randomly selected liquor and convenience stores, requesters explained that the reason they were asking the adult was because they did not have their identification with them, and requesters asked the adults to purchase a 6-pack of beer. During wave 1, we conducted 102 attempts, with the requester approaching the first adult entering the store alone. During wave 2, we conducted 102 attempts where the requester approached the first casually dressed male entering the store alone who appeared to be 21 to 30 years old. During wave 1, 8% of the general sample of approached adults provided alcohol to the pseudo-underage requesters. The odds of adults providing alcohol in urban areas were 9.4 times greater than in suburban areas. During wave 2, 19% of the approached young men provided alcohol to the requesters. No requester, request attempt, establishment, or community characteristics were associated with request attempt outcomes during wave 2. A small percentage of the general population of adults will agree to provide alcohol to underage youth when approached outside an alcohol establishment. The likelihood of underage youth obtaining alcohol through shoulder tapping increases substantially if the youth approach young men.

  7. Testing Local Independence between Two Point Processes

    DEFF Research Database (Denmark)

    Allard, Denis; Brix, Anders; Chadæuf, Joël

    2001-01-01

    Independence test, Inhomogeneous point processes, Local test, Monte Carlo, Nonstationary, Rotations, Spatial pattern, Tiger bush......Independence test, Inhomogeneous point processes, Local test, Monte Carlo, Nonstationary, Rotations, Spatial pattern, Tiger bush...

  8. A general scheme for obtaining graviton spectrums

    International Nuclear Information System (INIS)

    GarcIa-Cuadrado, G

    2006-01-01

    The aim of this contribution is to present a general scheme for obtaining graviton spectra from modified gravity theories, based on a theory developed by Grishchuk in the mid 1970s. We try to be pedagogical, putting in order some basic ideas in a compact procedure and also giving a review of the current trends in this arena. With the aim to fill a gap for the interface between quantum field theorists and observational cosmologist in this matter, we highlight two interesting applications to cosmology: clues as to the nature of dark energy; and the possibility of reconstruction of the scalar potential in scalar-tensor gravity theories

  9. Obtaining high purity silica from rice hulls

    Directory of Open Access Journals (Sweden)

    José da Silva Júnior

    2010-01-01

    Full Text Available Many routes for extracting silica from rice hulls are based on direct calcining. These methods, though, often produce silica contaminated with inorganic impurities. This work presents the study of a strategy for obtaining silica from rice hulls with a purity level adequate for applications in electronics. The technique is based on two leaching steps, using respectively aqua regia and Piranha solutions, which extract the organic matrix and inorganic impurities. The material was characterized by Fourier-transform infrared spectroscopy (FTIR, powder x-ray diffraction (XRD, x-ray fluorescence (XRF, scanning electron microscopy (SEM, particle size analysis by laser diffraction (LPSA and thermal analysis.

  10. Diaphragms obtained by radiochemical grafting in PTFE

    International Nuclear Information System (INIS)

    Nenner, T.; Fahrasmane, A.

    1984-01-01

    Diaphragms for alkaline water electrolysis are prepared by radiochemical grafting of PTFE fabric with styrene, which is later on sulfonated, or with acrylic acid. The diaphragms obtained are mechanically resistant to potash at temperatures up to 200 0 C, but show some degrafting, which limits the lifetime. The sulfonated styrene group has been found to be more stable in electrolysis than the acrylic acid. In both cases, the incorporation of a cross-linking agent like divinyl benzene improves the lifetime of the diaphragms. Electrolysis during 500 hours at 120 0 C and 10 kAm 2 could be performed. (author)

  11. Reliability of "Google" for obtaining medical information

    Directory of Open Access Journals (Sweden)

    Mihir Kothari

    2015-01-01

    Full Text Available Internet is used by many patients to obtain relevant medical information. We assessed the impact of "Google" search on the knowledge of the parents whose ward suffered from squint. In 21 consecutive patients, the "Google" search improved the mean score of the correct answers from 47% to 62%. We found that "Google" search was useful and reliable source of information for the patients with regards to the disease etiopathogenesis and the problems caused by the disease. The internet-based information, however, was incomplete and not reliable with regards to the disease treatment.

  12. A NEW RECIPE FOR OBTAINING CENTRAL VOLUME DENSITIES OF PRESTELLAR CORES FROM SIZE MEASUREMENTS

    International Nuclear Information System (INIS)

    Tassis, Konstantinos; Yorke, Harold W.

    2011-01-01

    We propose a simple analytical method for estimating the central volume density of prestellar molecular cloud cores from their column density profiles. Prestellar cores feature a flat central part of the column density and volume density profiles of the same size indicating the existence of a uniform-density inner region. The size of this region is set by the thermal pressure force which depends only on the central volume density and temperature of the core, and can provide a direct measurement of the central volume density. Thus, a simple length measurement can immediately yield a central density estimate independent of any dynamical model for the core and without the need for fitting. Using the radius at which the column density is 90% of the central value as an estimate of the size of the flat inner part of the column density profile yields an estimate of the central volume density within a factor of two for well-resolved cores.

  13. Deconvolution of spectral line profile by FTS

    International Nuclear Information System (INIS)

    Lego, J.

    1977-01-01

    The possibility is studied of determining the components of the spectral line profile using Fourier transformation. The different types of the spectral line profiles are described and the conditions for their generation discussed. The main result is the discovery of the possibility to obtain the parameters of the different components directly from the interferogram without using the Fourier transformation. The method under discussion strongly simplifies evaluation while preserving or increasing accuracy. (author)

  14. Mass independent isotope effects and their observations in nature

    International Nuclear Information System (INIS)

    Thiemens, M.H.

    2002-01-01

    In 1983, Thiemens and Heidenreich reported the first chemically produced mass independent isotope effect. A significant feature of the fractionation was that it identically produced the isotopic relation observed in the calcium-aluminum inclusions in the Allende meteorite. This δ 17 O=δ 18 O composition had previously been thought to represent a nucleosynthetic component as no chemical process was capable of producing a mass independent isotopic composition. It now appears nearly certain that the meteoritic oxygen isotopic anomalies were produced by chemical, rather than nuclear, processes. Since oxygen is the major element in stony planets this represents a major event in the formation of the solar system. In a recent review (Thiemens, 1999), it has been shown that mass independent isotopic compositions are pervasive in the Earth's atmosphere. Molecules which have been demonstrated to possess mass independent isotopic compositions include: O 2 , O 3 , CO 2 , CO, and N 2 O. In each case, the specific nature of the mass independent isotopic composition has provided details of their atmospheric chemistry that could not have been obtained by any other measurement technique. Most recently, solid materials have been observed to possess mass independent isotopic composition. In this paper, these observations are briefly discussed. These solid reservoirs include: 1) carbonates and sulphates from Mars, 2) terrestrial aerosol sulphate, 3) sulphides and sulphates from the Earth, ranging in time from 3.8 to 2.2 billion years before present, 4) sulphates from the Namibian desert and 5) the Antartic Dry Valleys. The information obtained from these measurements is extraordinarily wide ranging, extending from understanding the history of Martian atmosphereregolith interaction to the evolution of the oxygen in the Earth's earliest atmosphere. As was the case for gas phase species, this information and insight could not have been obtained by any other measurement technique

  15. Carbon nanofibers obtained from electrospinning process

    Science.gov (United States)

    Bovi de Oliveira, Juliana; Müller Guerrini, Lília; Sizuka Oishi, Silvia; Rogerio de Oliveira Hein, Luis; dos Santos Conejo, Luíza; Cerqueira Rezende, Mirabel; Cocchieri Botelho, Edson

    2018-02-01

    In recent years, reinforcements consisting of carbon nanostructures, such as carbon nanotubes, fullerenes, graphenes, and carbon nanofibers have received significant attention due mainly to their chemical inertness and good mechanical, electrical and thermal properties. Since carbon nanofibers comprise a continuous reinforcing with high specific surface area, associated with the fact that they can be obtained at a low cost and in a large amount, they have shown to be advantageous compared to traditional carbon nanotubes. The main objective of this work is the processing of carbon nanofibers, using polyacrylonitrile (PAN) as a precursor, obtained by the electrospinning process via polymer solution, with subsequent use for airspace applications as reinforcement in polymer composites. In this work, firstly PAN nanofibers were produced by electrospinning with diameters in the range of (375 ± 85) nm, using a dimethylformamide solution. Using a furnace, the PAN nanofiber was converted into carbon nanofiber. Morphologies and structures of PAN and carbon nanofibers were investigated by scanning electron microscopy, Raman Spectroscopy, thermogravimetric analyses and differential scanning calorimeter. The resulting residual weight after carbonization was approximately 38% in weight, with a diameters reduction of 50%, and the same showed a carbon yield of 25%. From the analysis of the crystalline structure of the carbonized material, it was found that the material presented a disordered structure.

  16. Experimental methodology for obtaining sound absorption coefficients

    Directory of Open Access Journals (Sweden)

    Carlos A. Macía M

    2011-07-01

    Full Text Available Objective: the authors propose a new methodology for estimating sound absorption coefficients using genetic algorithms. Methodology: sound waves are generated and conducted along a rectangular silencer. The waves are then attenuated by the absorbing material covering the silencer’s walls. The attenuated sound pressure level is used in a genetic algorithm-based search to find the parameters of the proposed attenuation expressions that include geometric factors, the wavelength and the absorption coefficient. Results: a variety of adjusted mathematical models were found that make it possible to estimate the absorption coefficients based on the characteristics of a rectangular silencer used for measuring the attenuation of the noise that passes through it. Conclusions: this methodology makes it possible to obtain the absorption coefficients of new materials in a cheap and simple manner. Although these coefficients might be slightly different from those obtained through other methodologies, they provide solutions within the engineering accuracy ranges that are used for designing noise control systems.

  17. Alcoholic Beverages Obtained from Black Mulberry

    Directory of Open Access Journals (Sweden)

    Jacinto Darias-Martín

    2003-01-01

    Full Text Available Black mulberry (Morus nigra is a fruit not known only for its nutritional qualities and its flavour, but also for its traditional use in natural medicine as it has a high content of active therapeutic compounds. However, this fruit is not widely produced in Spain but some trees are still found growing in the Canary Islands, particularly on the edges of the ravine. The inhabitants of these islands (Tenerife, La Gomera, La Palma, El Hierro and Lanzarote collect the fruit and prepare homemade beverages for medicinal purposes. Numerous authors have reported that type II diabetes mellitus can be controlled by taking a mixture containing black mulberry and water. Apart from that, this fruit has been used for the treatment of mouth, tongue and throat inflammations. In this study we present some characteristics of black mulberry juice (TSS, pH, titratable acidity, citric acid, lactic acid, polyphenols, anthocyanins, the potassium etc. and alcoholic beverages (alcoholic grade, pH, total acidity, volatile acidity, tannins, phenols etc. obtained from black mulberry. Moreover, we have studied the quality of liquors obtained from black mulberry in Canary Islands.

  18. Cotton nanofibers obtained by different acid conditions

    International Nuclear Information System (INIS)

    Teixeira, Eliangela de M.; Oliveira, Caue Ribeiro de; Mattoso, Luiz H.C.; Correa, Ana Carolina; Palladin, Priscila

    2009-01-01

    The thermal stability of cellulose nanofibers is related to their application and especially to polymer processing which temperatures of processing are around 200 deg C. In this work, nanofibers of commercial cotton were obtained by acid hydrolysis employing different acids: sulfuric, hydrochloric and a mixture (2:1; sulfuric acid: hydrochloric acid).The morphology of the nanofibers were characterized by transmission microscopy (TEM), crystallinity by x-ray diffraction (XRD) and thermal stability in air atmosphere by thermogravimetric analysis (TGA). The results indicated a very similar morphology and crystallinity among them. The main differences were relative to aggregation state e and thermal stability. The aggregation state of the suspensions decreases in the order HCl 2 SO 4 :HCl 2 SO 4- . The hydrolysis with a mix of HCl and H 2 SO 4 resulted in cellulose nanofibers with higher thermal stability than those hydrolyzed with H 2 SO 4 . The hydrolysis employed with a mixture of sulphuric and hydrochloric acids also showed a better dispersion than those suspensions of nanofibers obtained by hydrolysis with only HCl. (author)

  19. The Independent Payment Advisory Board.

    Science.gov (United States)

    Manchikanti, Laxmaiah; Falco, Frank J E; Singh, Vijay; Benyamin, Ramsin M; Hirsch, Joshua A

    2011-01-01

    The Independent Payment Advisory Board (IPAB) is a vastly powerful component of the president's health care reform law, with authority to issue recommendations to reduce the growth in Medicare spending, providing recommendations to be considered by Congress and implemented by the administration on a fast track basis. Ever since its inception, IPAB has been one of the most controversial issues of the Patient Protection and Affordable Care Act (ACA), even though the powers of IPAB are restricted and multiple sectors of health care have been protected in the law. IPAB works by recommending policies to Congress to help Medicare provide better care at a lower cost, which would include ideas on coordinating care, getting rid of waste in the system, providing incentives for best practices, and prioritizing primary care. Congress then has the power to accept or reject these recommendations. However, Congress faces extreme limitations, either to enact policies that achieve equivalent savings, or let the Secretary of Health and Human Services (HHS) follow IPAB's recommendations. IPAB has strong supporters and opponents, leading to arguments in favor of or against to the extreme of introducing legislation to repeal IPAB. The origins of IPAB are found in the ideology of the National Institute for Health and Clinical Excellence (NICE) and the impetus of exploring health care costs, even though IPAB's authority seems to be limited to Medicare only. The structure and operation of IPAB differs from Medicare and has been called the Medicare Payment Advisory Commission (MedPAC) on steroids. The board membership consists of 15 full-time members appointed by the president and confirmed by the Senate with options for recess appointments. The IPAB statute sets target growth rates for Medicare spending. The applicable percent for maximum savings appears to be 0.5% for year 2015, 1% for 2016, 1.25% for 2017, and 1.5% for 2018 and later. The IPAB Medicare proposal process involves

  20. Parametric dependencies of JET electron temperature profiles

    Energy Technology Data Exchange (ETDEWEB)

    Schunke, B [Commission of the European Communities, Abingdon (United Kingdom). JET Joint Undertaking; Imre, K; Riedel, K [New York Univ., NY (United States)

    1994-07-01

    The JET Ohmic, L-Mode and H-Mode electron temperature profiles obtained from the LIDAR Thomson Scattering Diagnostic are parameterized in terms of the normalized flux parameter and a set of the engineering parameters like plasma current, toroidal field, line averages electron density... It is shown that the electron temperature profiles fit a log-additive model well. It is intended to use the same model to predict the profile shape for D-T discharges in JET and in ITER. 2 refs., 5 figs.

  1. Aerodynamics profile not in stationary flow

    Directory of Open Access Journals (Sweden)

    А.А. Загорулько

    2006-02-01

    Full Text Available  Consider the question about influence of unsteady flight on the size of drag and lift coefficients of theaerodynamic profile. Distinctive features of this investigation are obtaining data about aerodynamic drag chancing in process unsteady on high angle at attack and oscillation profile in subsonic and transonic flight. Given analysis of oscillation profile show, that dynamic loops accompany change of lift and dray force. The researches show that it is necessary to clarity the mathematic model of the airplane flight dynamics by introducing numbers, with take into account unsteady effects.

  2. The worker profile autocontrolled

    Directory of Open Access Journals (Sweden)

    Jairo Omar Delgado Mora

    2015-06-01

    Full Text Available This document is part of two deliveries. In this first paper is to make an approach to the concept of self-control from the very beginning with Sakichi Toyoda, founder of what the industry Toyota Motor Company, additionally taking some excerpts of the concept issued by teachers and the psychologist Henry Murray, a professor at the university Harvard precursor test TAT personality test creator, pen applied world wide by psychologists David McCllelan, also a psychologist and a pioneer in the study of human needs and the concept of competence; Professor Jeffrey Pfeffer of Stanford University organizational behavior and theory, Frederick Hertzberg, Psychologist and strong influential in business management, Kronfly Cruz, lawyer and investigator of social and administrative sciences, Charles Perrow, a sociologist at Yale University and Stanford , who studies the impact of large organizations in society, among others. The study reflects the need to meet organizational objectives related to the physicochemical characteristics of the finished product in a plant of the company’s main beers in the country. In this paper, we intend to make an approximation of worker self -controlled, which when compared with the powers, generic, specific and technical area established by the brewery, will allow generating a methodology to adjust these competencies and to obtain the target profile drawn. This comparison and development of the methodology proposed is the subject of the second work planned.

  3. Solubility-pH profiles of some acidic, basic and amphoteric drugs.

    Science.gov (United States)

    Shoghi, Elham; Fuguet, Elisabet; Bosch, Elisabeth; Ràfols, Clara

    2013-01-23

    The solubility vs. pH profiles of five ionizable drugs of different nature (a monoprotic acid, a monoprotic base, a diprotic base and two amphoteric compounds showing a zwitterionic species each one) have been determined through two different methodologies: the classical shake-flask (S-F) and the potentiometric Cheqsol methods using in both instances the appropriate Henderson-Hasselbalch (H-H) or derived relationships. The results obtained independently from both approaches are consistent. A critical revision about the influence of the electrolyte used as buffering agent in the S-F method on the obtained solubility values is also performed. Thus, some deviations of the experimental points with respect the H-H profiles can be attributed to specific interactions between the buffering electrolyte and the drug due to the hydrotrophic character of citric and lactic acids. In other cases, the observed deviations are independent of the buffers used since they are caused by the formation of new species such as drug aggregates (cefadroxil) or the precipitation of a salt from a cationic species of the analyzed compound (quetiapine). Copyright © 2012 Elsevier B.V. All rights reserved.

  4. Polypropylene obtained through zeolite supported catalysts

    International Nuclear Information System (INIS)

    Bastos, Queli C.; Marques, Maria de Fatima V.

    2004-01-01

    Propylene polymerizations were carried out with φ 2 C(Flu)(Cp)ZrCl 2 and SiMe 2 (Ind)2ZrCl 2 catalysts supported on silica, zeolite sodic mordenite (NaM) and acid mordenite (HM). The polymerizations were performed at different temperatures and varying aluminium/zirconium molar ratios ([Al]/[Zr]). The effect of these reaction parameters on the catalyst activity was investigated using a proposed statistical experimental planning. In the case of f 2 C(Flu)(Cp)ZrCl 2 , SiO 2 and NaM were used as support and the catalyst performance evaluated using toluene and pentane as polymerization solvent. The molecular weight, molecular weight distribution, melting point and crystallinity of the polymers were examined. The results indicate very high activities for the syndiospecific heterogeneous system. Also, the polymers obtained had superior Mw and stereo regularity. (author)

  5. Polypropylene obtained through zeolite supported catalysts

    Directory of Open Access Journals (Sweden)

    Queli C. Bastos

    2004-01-01

    Full Text Available Propylene polymerizations were carried out with f2C(Flu(CpZrCl2 and SiMe2(Ind2ZrCl2 catalysts supported on silica, zeolite sodic mordenite (NaM and acid mordenite (HM. The polymerizations were performed at different temperatures and varying aluminium/zirconium molar ratios ([Al]/[Zr]. The effect of these reaction parameters on the catalyst activity was investigated using a proposed statistical experimental planning. In the case of f2C(Flu(CpZrCl2, SiO2 and NaM were used as support and the catalyst performance evaluated using toluene and pentane as polymerization solvent. The molecular weight, molecular weight distribution, melting point and crystallinity of the polymers were examined. The results indicate very high activities for the syndiospecific heterogeneous system. Also, the polymers obtained had superior Mw and stereoregularity.

  6. Process to Obtain Quick Counts from PREP

    Directory of Open Access Journals (Sweden)

    Martínez–Cruz M.Á.

    2011-10-01

    Full Text Available Considering the Preliminary Electoral Results Program (PERP as a database of the federal elections for president of the Mexican Republic, a methodology was developed in order to find representative samples of ballot boxes installed in the election’s day (quick count in different hours, due to its characteristics of gathering of information, the PREP in the first hours forms a non-representative sample of data. In a particular way, in the election of July 2, 2006, after 3 hours of opening the PREP, it was observed that the accuracy of the process of the quick counts was better than the one obtained by the IFE. Among other things, this allows to lower the cost, to increase the confidentiality of the ballot boxes used in the sampling and to distinguish in a precise moment the winning candidate long before PREP finishes.

  7. The method of obtaining of decorative varnish

    International Nuclear Information System (INIS)

    Salidzhanova, N.S.; Tashbekova, D.M.

    1997-01-01

    The method of obtaining of decorative varnish allowing to remove inhibition action of air oxygen and to improve the varnish hardness is described. It is includes the impregnation of texture paper with mixture of PE-284 type polyether lacquer on the basis of unsaturated oligoethylenglycolfumarath resin and cation type salt, putting it on wooden or asbestos cement slabs and further hardening by pulsed beams of accelerated electrons on moving belt. The radiation dose for one pulse is 1,10 -2 - 9,10 -3 MGy, the number of pulses is 180 - 250, the duration of pulses is 2.3 ms, their frequency is 50 KHz. Chloride, bromide, benzylbromide or iodide of N, N-dialkylaminoethyl (benzil) (met)acrylate are used as cation type salt. (author)

  8. Devices for obtaining information about radiation sources

    International Nuclear Information System (INIS)

    Tosswill, C.H.

    1981-01-01

    The invention provides a sensitive, fast high-resolution device for obtaining information about the distribution of gamma and X-radiation sources and provides a radiation detector useful in such a device. It comprises a slit collimator with a multiplicity of slits each with slit-defining walls of material and thickness to absorb beam components impinging on them. The slits extend further in one direction than the other. The detector for separately detecting beam components passing through the slits also provides data output signals. It comprises a plurality of radiation transducing portions which are not photoconductor elements each at the end of a slit. A positioner operates to change the transverse position of the slits and radiation transducing portions relative to the source, wherein each radiation transducing element is positioned within its respective slit between the slit defining walls. Full details and preferred embodiments are given. (U.K.)

  9. Devices for obtaining information about radiation sources

    International Nuclear Information System (INIS)

    Tosswill, C.H.

    1981-01-01

    The invention provides a sensitive, fast, high-resolution device for obtaining information about the distribution of gamma and X-radiation sources and provides a radiation detector useful in such a device. It comprises a slit collimator with a multiplicity of slits each with slit-defining walls of material and thickness to absorb beam components impinging on them. The slits extend further in one transverse direction than the other. The detector for separately detecting beam components passing through the slits also provides data output signals. It comprises a plurality of radiation transducing portions, each at the end of a slit. A positioner changes the transverse position of the slits and radiation transducer (a photoconductor) relative to the source. Applications are in nuclear medicine and industry. Full details and preferred embodiments are given. (U.K.)

  10. Obtaining the electrostatic screening from first principles

    International Nuclear Information System (INIS)

    Shaviv, N.J.; Shaviv, G.

    2003-01-01

    We derive the electrostatic screening effect from first principles and show the basic properties of the screening process. We in particular show that under the conditions prevailing in the Sun the number of particles in the Debye sphere is of the order of unity. Consequently; fluctuations play a dominant role in the screening process. The fluctuations lead to an effective time dependent potential. Particles with low kinetic energy lose on the average energy to the plasma and vice versa with high energy particles. We derive general conditions on the screening energy and show under what conditions the Salpeter approximation is obtained. The connection between the screening and relaxation processes in the plasma is exposed

  11. ORIENTATION OF ENTERPRISES TOWARD OBTAINING COMPETITIVE

    Directory of Open Access Journals (Sweden)

    PAUL BOGDAN ZAMFIR

    2015-10-01

    Full Text Available In this paper I proposed to emphasize the importance of obtaining competitive advantage by companies on EU internal market. The huge EU market, offers for participating companies the possibility to achieve significant economies of scale and numerous niches (segments market, which can be covered with large quantities of goods, the condition is that niches to be discovered in time, and the firms to be able to adapt promptly at their needs. Thus, the most important positive effect derives from the fact that companies have at their disposal a vast market consisting approximately 500 million consumers, free of customs duties and other restrictions inhindering the movement of goods. On this background, the companies can achieve high series production and thereby can reduce their cost of production and increase their competitiveness. In this context, the companies must meet the standards of the European Union, if they really want to gain competitive advantage on EU market.

  12. Does firm performance affect board independence?

    Directory of Open Access Journals (Sweden)

    Yi Wang

    2010-07-01

    Full Text Available This paper seeks to shed some light on the antecedents of board independence. Specifically, it attempts to test the conceptual frameworks which make different predictions about the effect of firm performance on the level of board independence. The results provide support for the perspective that appointing more independent members to the boards may merely represent firms’ attempts to comply with institutional pressures. It is found that higher blockholder shareholdings lead to lower independence on the board, and audit and remuneration committees. Moreover, larger firms have relatively more independent directors sitting on nomination and remuneration committees.

  13. Enhanced dynamic wedge and independent monitor unit verification

    International Nuclear Information System (INIS)

    Howlett, S.J.; University of Newcastle, NSW

    2004-01-01

    Full text: Some serious radiation accidents have occurred around the world during the delivery of radiotherapy treatment. The regrettable incident in Panama clearly indicated the need for independent monitor unit (MU) verification. Indeed the International Atomic Energy Agency (IAEA), after investigating the incident, made specific recommendations for radiotherapy centres which included an independent monitor unit check for all treatments. Independent monitor unit verification is practiced in many radiotherapy centres in developed countries around the world. It is mandatory in USA but not yet in Australia. The enhanced dynamic wedge factor (EDWF) presents some significant problems in accurate MU calculation, particularly in the case of non centre of field position (COF). This paper describes development of an independent MU program, concentrating on the implementation of the EDW component. The difficult case of non COF points under the EDW was studied in detail. A survey of Australasian centres regarding the use of independent MU check systems was conducted. The MUCalculator was developed with reference to MU calculations made by Pinnacle 3D RTP system (Philips) for 4MV, 6MV and 18MV X-ray beams from Varian machines used at the Newcastle Mater Misericordiae Hospital (NMMH) in the clinical environment. Ionisation chamber measurements in solid water TM and liquid water were performed based on a published test data set. Published algorithms combined with a depth dependent profile correction were applied in an attempt to match measured data with maximum accuracy. The survey results are presented. Substantial data is presented in tabular form and extensive comparison with published data. Several different methods for calculating EDWF are examined. A small systematic error was detected in the Gibbon equation used for the EDW calculations. Generally, calculations were within +2% of measured values, although some setups exceeded this variation. Results indicate that COF

  14. Spatially independent martingales, intersections, and applications

    CERN Document Server

    Shmerkin, Pablo

    2018-01-01

    The authors define a class of random measures, spatially independent martingales, which we view as a natural generalization of the canonical random discrete set, and which includes as special cases many variants of fractal percolation and Poissonian cut-outs. The authors pair the random measures with deterministic families of parametrized measures \\{\\eta_t\\}_t, and show that under some natural checkable conditions, a.s. the mass of the intersections is H�lder continuous as a function of t. This continuity phenomenon turns out to underpin a large amount of geometric information about these measures, allowing us to unify and substantially generalize a large number of existing results on the geometry of random Cantor sets and measures, as well as obtaining many new ones. Among other things, for large classes of random fractals they establish (a) very strong versions of the Marstrand-Mattila projection and slicing results, as well as dimension conservation, (b) slicing results with respect to algebraic curves a...

  15. A new method for measuring coronary artery diameters with CT spatial profile curves

    International Nuclear Information System (INIS)

    Shimamoto, Ryoichi; Suzuki, Jun-ichi; Yamazaki, Tadashi; Tsuji, Taeko; Ohmoto, Yuki; Morita, Toshihiro; Yamashita, Hiroshi; Honye, Junko; Nagai, Ryozo; Akahane, Masaaki; Ohtomo, Kuni

    2007-01-01

    Purpose: Coronary artery vascular edge recognition on computed tomography (CT) angiograms is influenced by window parameters. A noninvasive method for vascular edge recognition independent of window setting with use of multi-detector row CT was contrived and its feasibility and accuracy were estimated by intravascular ultrasound (IVUS). Methods: Multi-detector row CT was performed to obtain 29 CT spatial profile curves by setting a line cursor across short-axis coronary angiograms processed by multi-planar reconstruction. IVUS was also performed to determine the reference coronary diameter. IVUS diameter was fitted horizontally between two points on the upward and downward slopes of the profile curves and Hounsfield number was measured at the fitted level to test seven candidate indexes for definition of intravascular coronary diameter. The best index from the curves should show the best agreement with IVUS diameter. Results: Of the seven candidates the agreement was the best (agreement: 16 ± 11%) when the two ratios of Hounsfield number at the level of IVUS diameter over that at the peak on the profile curves were used with water and with fat as the background tissue. These edge definitions were achieved by cutting the horizontal distance by the curves at the level defined by the ratio of 0.41 for water background and 0.57 for fat background. Conclusions: Vascular edge recognition of the coronary artery with CT spatial profile curves was feasible and the contrived method could define the coronary diameter with reasonable agreement

  16. Biodegradable Polyelectrolyte Obtained by Radiation Polymerization

    International Nuclear Information System (INIS)

    Craciun, G.; Martin, D.; Manaila, E.; Nemtanu, M.; Brasoveanu, M.; Ighigeanu, D.

    2009-01-01

    Poly electrolytes are water-soluble polymers carrying ionic charge along the polymer chain. Depending upon the charge, these polymers are anionic or cationic. The inherent solid - liquid separating efficiency makes these poly electrolytes a unique class of polymers which find extensive application in potable water, industrial raw and process water, municipal sewage treatment, mineral processing and metallurgy, oil drilling and recovery, etc. Also, due to their ability to produce advanced induced coagulation, a considerable amount of bacteria and viruses are precipitated together with the suspended solids. Especially the acrylamide polymers are very efficacious for water treatment but acrylamide is a toxic monomer and therefore their use are governed by international standards that provide the residual acrylamide monomer content (RAMC) in them be less than 0.05%. Under these circumstances our attention was focused on the following research steps that are presented in this paper: 1) Preparation of a special class of poly electrolytes, named Pn, with very low RAMC values, based on electron beam (EB), microwave (MW) and EB + MW induced co-polymerization of aqueous solutions containing appropriate mixtures of acrylamide (AMD) and acrylic acid (AA) monomers (AMD - AA co-polymers). The Pn were obtained by radiation technology with very small RAMC (under 0.01%) as well as in a wide range of molecular weights and charge densities. Very low AMD monomer content of Pn is due to the major advantages of radiation induced polymerization in aqueous solution containing monomers. Due to water presence in the EB irradiated system, irradiated water radicals facilitate the polymerization process and increase rate and level of monomers conversion in co-polymers. Also, once again, by the presence of water, which absorbs MW energy very strongly, the MW polymerization reaction rate is much enhanced resulting in a reaction time about 50-100 times lowers than by conventional heating. Also

  17. Genotoxicity of corrosion eluates obtained from orthodontic brackets in vitro.

    Science.gov (United States)

    Angelieri, Fernanda; Marcondes, Joao Paulo C; de Almeida, Danielle Cristina; Salvadori, Daisy M F; Ribeiro, Daniel A

    2011-04-01

    The purpose of this study was to evaluate whether corrosion eluates obtained from commercially available orthodontic brackets are able to induce genetic damage in vitro. Genotoxicity was assessed by the single cell gel (comet) assay using Chinese hamster ovary (CHO) cells. The following orthodontic metallic brackets were used: Morelli (Sorocaba, Brazil); Abzil (São José do Rio Preto, Brazil); Dentaurum (Pforzheim, Germany); and 3M Unitek (Puchheim, Germany). Each dental bracket was submitted to a corrosion process in a solution containing equal amounts of acetic acid and sodium chloride at 0.1 M concentration for 1, 3, 7, 14, 21, 35, and 70 days. CHO cells were exposed to eluates for 30 minutes at 37°C. The negative control was treated with the same solution used for corrosion process for 30 minutes at 37°C. Independent positive control was performed with methyl methanesulfonate (MMS) (Sigma Aldrich, St. Louis, Mo) at 1 ug/mL for 1 hour. None of the eluates was found to exhibit genotoxicity, regardless of the different commercial brands of orthodontic appliance used. In summary, our results indicate corrosion eluates obtained from orthodontic brackets do not induce genetic damage as assessed by single cell gel (comet) assay. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

  18. YOUNG ATHLETES' MOTIVATIONAL PROFILES

    Directory of Open Access Journals (Sweden)

    Juan Antonio Moreno Murcia

    2007-06-01

    Full Text Available The aim of this study was to examine the relationship between motivational characteristics and dispositional flow. In order to accomplish this goal, motivational profiles emerging from key constructs within Achievement Goal Theory and Self-Determination Theory were related to the dispositional flow measures. A sample of 413 young athletes (Age range 12 to 16 years completed the PMCSQ-2, POSQ, SMS and DFS measures. Cluster analysis results revealed three profiles: a "self-determined profile" characterised by higher scores on the task-involving climate perception and on the task orientation; a "non-self-determined profile", characterised by higher scores on ego-involving climate perception and ego orientation; and a "low self-determined and low non-self-determined profile" which had the lowest dispositional flow. No meaningful differences were found between the "self-determined profile" and the "non-self-determined profile" in dispositional flow. The "self-determined profile" was more commonly associated with females, athletes practising individual sports and those training more than three days a week. The "non-self-determined profile" was more customary of males and athletes practising team sports as well as those training just two or three days a week

  19. HOW TO OBTAIN BOOKS FOR YOUR GROUP

    CERN Multimedia

    Head Librarian

    2000-01-01

    The wide variety of scientific and technical activity engaged in by people working at CERN means that the Library cannot always provide a deep on-site coverage in areas which are outside the core subjects of particle physics and accelerators. As many of you have already experienced, one way of solving this is to borrow books from other libraries. Our Inter-Library Loan (ILL) service currently obtains about 1000 books on loan per year for readers at CERN. However, there may be books which groups need on a more permanent basis, in which case a loan from either our own collection or via ILL is not the appropriate solution. Instead, groups might prefer to purchase such books from their own budgets. To facilitate this, the CERN Library has set up a procedure with the SPL Division, by which you can submit your purchase request to us and be charged via a TID when you receive the book. In addition, via our database interface WebLib, we can provide you with a private virtual catalogue of your group's collection, which...

  20. Evaluation of biodiesel obtained from cottonseed oil

    Energy Technology Data Exchange (ETDEWEB)

    Rashid, Umer [Department of Chemistry and Biochemistry, University of Agriculture, Faisalabad-38040 (Pakistan); Department of Industrial Chemistry, Government College University, Faisalabad-38000 (Pakistan); Anwar, Farooq [Department of Chemistry and Biochemistry, University of Agriculture, Faisalabad-38040 (Pakistan); Knothe, Gerhard [United States Department of Agriculture, Agricultural Research Service, National Center for Agricultural Utilization Research, Peoria, IL 61604 (United States)

    2009-09-15

    Esters from vegetable oils have attracted a great deal of interest as substitutes for petrodiesel to reduce dependence on imported petroleum and provide a fuel with more benign environmental properties. In this work biodiesel was prepared from cottonseed oil by transesterification with methanol, using sodium hydroxide, potassium hydroxide, sodium methoxide and potassium methoxide as catalysts. A series of experiments were conducted in order to evaluate the effects of reaction variables such as methanol/oil molar ratio (3:1-15:1), catalyst concentration (0.25-1.50%), temperature (25-65 C), and stirring intensity (180-600 rpm) to achieve the maximum yield and quality. The optimized variables of 6:1 methanol/oil molar ratio (mol/mol), 0.75% sodium methoxide concentration (wt.%), 65 C reaction temperature, 600 rpm agitation speed and 90 min reaction time offered the maximum methyl ester yield (96.9%). The obtained fatty acid methyl esters (FAME) were analyzed by gas chromatography (GC) and {sup 1}H NMR spectroscopy. The fuel properties of cottonseed oil methyl esters (COME), cetane number, kinematic viscosity, oxidative stability, lubricity, cloud point, pour point, cold filter plugging point, flash point, ash content, sulfur content, acid value, copper strip corrosion value, density, higher heating value, methanol content, free and bound glycerol were determined and are discussed in the light of biodiesel standards such as ASTM D6751 and EN 14214. (author)

  1. Electrolytic Hydrogen obtaining by a photovoltaic source

    International Nuclear Information System (INIS)

    Pasculete, E.; Condrea, F.; Stanoiu, L.

    2005-01-01

    At present, the developed countries allocate large funds for the financing of some global programs for fundamental and applicative research for development of hydrogen non-conventional production technologies. One of these technologies is the photo-assisted electrolysis. This technology is adopted in the research, which results are presented in this paper. The experimental model includes as basic equipment 100 W photovoltaic source, electrolysis battery press filter type, control unit of the electric energy discharged, accumulator, hydrogen storage unit. Five types of material have been tested for the electrolysis cell diaphragm: asbestos; Netrom- unwoven material from fibers of polypropylene; ion changing composite membrane - polysulfone support with an active layer of sulfonated poly-sulfone (PSS/PSJ) and poly-sulfone support with an active layer of sulfonated poly-eter cetone (SPEEK/PSf); ion-exchange membrane made from sulfonated poly-eter cetone (SPEEK). The graphics and results from the test system are presented. The analysis of the experimental results lead to the establishment of the optimal configuration of battery and of the operational conditions of the assembly. The experimental results give the opportunity to obtain electrolytic hydrogen with a photovoltaic source, in an efficient system, and promote the Romanian research at a level of a demonstrative installation

  2. WAYS OF OBTAINING FINANCING BY TOUR OPERATORS

    Directory of Open Access Journals (Sweden)

    CARLAN ADRIANA

    2015-12-01

    Full Text Available domanin.Romania is a country with highly touristic potential that is not exploited to maximum. In order to reach a high quality level of tourism permanent development and modernization are needed and also the establishment of new businesses That conducts other activities other than those which takes place in our country. Ways of getting funds are multiple, depending on individual needs.To develop tourism activities it is necessary to require some funding that can come from various sources: auto-financing, loans from various banks or from third parties and grants offered by the European Union. There are many programs designed to support the development of tourism, such as ROP that allows people to access grants in order to implement projects for the establishment and the development of the activity in the touristic field. The purpose of this article is to highlight funding opportunities for the tourism operators and to assist them in choosing the appropriate form of financing of the current activity or the activity they want to implement in the future and description of how to obtain the necessary funds from various sources.

  3. Shielding design to obtain compact marine reactor

    International Nuclear Information System (INIS)

    Yamaji, Akio; Sako, Kiyoshi

    1994-01-01

    The marine reactors equipped in previously constructed nuclear ships are in need of the secondary shield which is installed outside the containment vessel. Most of the weight and volume of the reactor plants are occupied by this secondary shield. An advanced marine reactor called MRX (Marine Reactor X) has been designed to obtain a more compact and lightweight marine reactor with enhanced safety. The MRX is a new type of marine reactor which is an integral PWR (The steam generator is installed in the pressure vessel.) with adopting a water-filled containment vessel and a new shielding design method of no installation of the secondary shield. As a result, MRX is considerably lighter in weight and more compact in size as compared with the reactors equipped in previously constructed nuclear ships. For instance, the plant weight and volume of the containment vessel of MRX are about 50% and 70% of those of the Nuclear Ship MUTSU, in spite of the power of MRX is 2.8 times as large as the MUTSU's reactor. The shielding design calculation was made using the ANISN, DOT3.5, QAD-CGGP2 and ORIGEN codes. The computational accuracy was confirmed by experimental analyses. (author)

  4. USGIN ISO metadata profile

    Science.gov (United States)

    Richard, S. M.

    2011-12-01

    The USGIN project has drafted and is using a specification for use of ISO 19115/19/39 metadata, recommendations for simple metadata content, and a proposal for a URI scheme to identify resources using resolvable http URI's(see http://lab.usgin.org/usgin-profiles). The principal target use case is a catalog in which resources can be registered and described by data providers for discovery by users. We are currently using the ESRI Geoportal (Open Source), with configuration files for the USGIN profile. The metadata offered by the catalog must provide sufficient content to guide search engines to locate requested resources, to describe the resource content, provenance, and quality so users can determine if the resource will serve for intended usage, and finally to enable human users and sofware clients to obtain or access the resource. In order to achieve an operational federated catalog system, provisions in the ISO specification must be restricted and usage clarified to reduce the heterogeneity of 'standard' metadata and service implementations such that a single client can search against different catalogs, and the metadata returned by catalogs can be parsed reliably to locate required information. Usage of the complex ISO 19139 XML schema allows for a great deal of structured metadata content, but the heterogenity in approaches to content encoding has hampered development of sophisticated client software that can take advantage of the rich metadata; the lack of such clients in turn reduces motivation for metadata producers to produce content-rich metadata. If the only significant use of the detailed, structured metadata is to format into text for people to read, then the detailed information could be put in free text elements and be just as useful. In order for complex metadata encoding and content to be useful, there must be clear and unambiguous conventions on the encoding that are utilized by the community that wishes to take advantage of advanced metadata

  5. Ethnosocial profile of Tuvans

    Directory of Open Access Journals (Sweden)

    Valeriya S. Kan

    2016-06-01

    Full Text Available The article examines the ethnosocial profile of contemporary Tuvans, with a focus on the dynamics of population change, human environment, self-consciousness, interethnic relations and language command. Our study was based on the official data of the Federal Census and the current statistics we obtained from Tuva territorial branch of the Federal State Statistics Service, as well as on the outcomes of the opinion polls held by a team lead by the author in 2008-2015. Due to traditionally high birth rate, the Tuvan population of Russia continues to grow (243422 in 2002, 263934 in 2010. This is also true for their share in the total population of Russia (0.17% in 2002, 0.19% in 2010. The main features of Tuvan human environment are their compact settlement within the Republic of Tuva (249299, or 95% of overall population, as well as living largely in a monoethnic environment, low level of ethnocultural and linguistic diversity and prevalence of rural population. The share of indigenous population in the region has been steadily increasing (64% in 1989, 77% in 2002, 82% in 2002, while those of other groups have been decreasing over time. The net migration remains negative due to ethnic Russians leaving the socially and economically dysfunctional region. Tuvans account for 92% of rural population, and 73% of the urban. The rural-urban balance in Tuva is shifting towards the latter slower than in the national average. Interethnic relations in the region can be described as stable, with a slight degree of tension. Problems mainly happen on the level of day-to-day communication. The sub-ethnicity of Tojin Tuvans is decreasing in numbers (4435 people in 2002, and 1856 in 2010. We believe the reason lies in the change of self-consciousness which accompanied the complete abandonment of nomadic lifestyle. In the article, we also define and describe the factors which contribute to the reproduction of Tuvan ethnicity, including the policy of the regional

  6. Model-independent effects of Δ excitation in nucleon polarizabilities

    International Nuclear Information System (INIS)

    Pascalutsa, Vladimir; Phillips, Daniel R.

    2003-01-01

    Model-independent effects of Δ(1232) excitation on nucleon polarizabilities are computed in a Lorentz-invariant fashion. We find a large effect of relative order (M Δ -M)/M in some of the spin polarizabilities, with the backward spin polarizability receiving the largest contribution. Similar subleading effects are found to be important in the fourth-order spin-independent polarizabilities α Eν , α E2 , β Mν , and β M2 . Combining our results with those for the model-independent effects of pion loops we obtain predictions for spin and fourth-order polarizabilities which compare favorably with the results of a recent dispersion-relation analysis of data

  7. Culture -independent Pathogenic Bacterial Communities in Bottled Mineral Water

    Directory of Open Access Journals (Sweden)

    Hamdy A. Hassan

    2015-08-01

    Full Text Available Bottled mineral water (BMW is an alternative to mains water and consider it to be better and safer. Access to safe BMW from the bacteria involving potential health hazard is essential to health. Cultivation-independent technique PCR-based single-strand conformation polymorphism (SSCP for genetic profiling of PCR-amplified 16S rRNA genes was performed using Com primer set targeting the 16S rRNA genes for detection of pathogenic bacteria in bottled mineral water from the final product of six factories for bottled mineral drinking water in Wadi El-natron region- Egypt. These factories use often ozone technology to treat large quantities of water because of its effectiveness in purifying and conditioning water. A total of 27 single products were isolated from the profiles by PCR re-amplification and cloning. Sequence analysis of 27 SSCP bands revealed that the 16S rRNA sequences were clustered into seven operational taxonomic units (OTUs and the compositions of the communities of the six samples were all common. The results showed that most communities from phyla Alphaproteobacteria and certainly in the Sphingomonas sp. Culture-independent approaches produced complementary information, thus generating a more accurate view for the bacterial community in the BMW, particularly in the disinfection step, as it constitutes the final barrier before BMW distribution to the consumer

  8. The apparent and effective chloride migration coefficients obtained in migration tests

    NARCIS (Netherlands)

    Spiesz, P.R.; Brouwers, H.J.H.

    2013-01-01

    The apparent (Dapp) and effective (Deff) migration coefficients obtained in chloride migration tests are investigated in this study. The presented Dapp profiles in concrete show that the apparent migration coefficient is strongly concentration-dependent. As demonstrated, the binding of chlorides is

  9. Homicide and domestic violence. Are there different psychological profiles mediated by previous exerted on the victim?

    Directory of Open Access Journals (Sweden)

    Montserrat Yepes

    2009-07-01

    Full Text Available A sample of 46 men was evaluated with the DAPP (Questionnaire of Domestic Aggressor Psychological Profile. All were inmates convicted for various degrees of violence against their wives in different prisons. The sample was divided into three groups: homicides without previous violence against their wives (H (n=11, homicides with previous violence (VH (n=9 and domestic batterers without previous homicide attempts against their partners (B (n=26. The aim of the study was to analyze the possible existence of three different kinds of profiles and more specifically if it’s possible to obtain an independent profile for domestic homicides with previous episodes of violence against their wives. The results neither confirm the hypothesis as whole nor for the violent homicides. However, differences between groups were obtained in the admission and description of the facts, in the risk of future violence, in some sociodemographical characteristics (i.e., level of education, social status, in the couple relationship, in the dissatisfaction concerning the unachieved ideal woman, in the use of extreme physical force during the aggression, the time of the first aggression, the use of verbal threats during the aggression, explanation of the events to the family and the period of time between the beginning of the romantic relationship and the manifestation of violence. The implications of the results for the theoretical frameworks proposed and future research are discussed.

  10. Obtaining cementitious material from municipal solid waste

    Directory of Open Access Journals (Sweden)

    Macías, A.

    2007-06-01

    Full Text Available The primary purpose of the present study was to determine the viability of using incinerator ash and slag from municipal solid waste as a secondary source of cementitious materials. The combustion products used were taken from two types of Spanish MSW incinerators, one located at Valdemingómez, in Madrid, and the other in Melilla, with different incineration systems: one with fluidised bed combustion and other with mass burn waterwall. The effect of temperature (from 800 to 1,200 ºC on washed and unwashed incinerator residue was studied, in particular with regard to phase formation in washed products with a high NaCl and KCl content. The solid phases obtained were characterized by X-ray diffraction and BET-N2 specific surface procedures.El principal objetivo del trabajo ha sido determinar la viabilidad del uso de las cenizas y escorias procedentes de la incineración de residuos sólidos urbanos, como materia prima secundaria para la obtención de fases cementantes. Para ello se han empleado los residuos generados en dos tipos de incineradoras españolas de residuos sólidos urbanos: la incineradora de Valdemingómez y la incineradora de Melilla. Se ha estudiado la transformación de los residuos, sin tratamiento previo, en función de la temperatura de calentamiento (desde 800 ºC hasta 1.200 ºC, así como la influencia del lavado de los residuos con alto contenido en NaCl y KCl en la formación de fases obtenidas a las diferentes temperaturas de calcinación. Las fases obtenidas fueron caracterizadas por difracción de rayos X y área superficial por el método BET-N2.

  11. Reduced sensitivity RDX obtained from bachmann RDX

    Energy Technology Data Exchange (ETDEWEB)

    Spyckerelle, Christian; Eck, Genevieve [EURENCO France, Sorgues Plant 1928 route d' Avignon, BP 311, 84706 Sorgues Cedex (France); Sjoeberg, Per; Amneus, Anna-Maria [EURENCO Sweden, SE-69186 Karlskoga (Sweden)

    2008-02-15

    In recent years much interest has been generated in a quality of reduced sensitivity RDX (RS-RDX), like I-RDX {sup registered} which, when incorporated in cast cure and even pressable plastic bonded explosives (PBX compositions), can confer reduced shock sensitivity as measured through gap test. At crystal level, lot of work has been done to try to determine which property or properties may explain the behaviour of the corresponding cast PBX composition. But up to now, and despite an international inter-laboratory comparison (Round Robin) of seven lots of RDX from five different manufacturers conducted from 2003 to 2005, even if some techniques lead to interesting results, there is no dedicated specification to apply to RS-RDX. This quality (I-RDX {sup registered}) has proved to retain its low sensitivity even after ageing, which does not seem to be the case for standard RDX produced by the Bachmann process (when re-crystallized under I-RDX conditions in order to obtain RS-RDX). It has been shown that the higher sensitivity of RDX produced by the Bachmann process, or the evolution of sensitivity after ageing of RS-RDX produced from Bachmann RDX may be linked to the presence of octogen (HMX) during the crystallization process. In order to check such hypothesis, low HMX content RDX produced by the Bachmann process has been prepared and evaluated in cast PBX composition (PBX N 109). Results of the characterization of such quality of RDX and its evaluation in cast PBX composition as well as ageing behaviour are presented and discussed; there are indications that removal of HMX from Bachmann RDX may lead to RS-RDX, which retains its RS character even after ageing. (Abstract Copyright [2008], Wiley Periodicals, Inc.)

  12. Reversed field pinch magnetic equilibrium and profile dynamics in Extrap T1-upgrade

    International Nuclear Information System (INIS)

    Nordlund, P.; Mazur, S.; Drake, J.R.

    1992-05-01

    An eight station insertable magnetic probe has been installed on the Extrap T1-U machine. The structure of the reversed field pinch magnetic equilibrium and the time evolution of the profiles has been studied. The probe was inserted into sustained high current density RFP plasma, typically 12-16 MA/m 2 on axis. When the probe was inserted there was a somewhat shorter pulse duration and a slightly decaying current. The magnetic field profiles are shift corrected and expressed in a cylindrically symmetric form. All quantities are then derived from cylindrically symmetric equations. In the beginning of the sustainment phase, where the best reproducibility is achieved, we have been able to obtain estimates of the pressure profile consistent with independent measurements of the central pressure. Values of βθ approx = 0.19 and approx = 0.09 are found leading to an estimation of the energy confinement time, with the probe inserted, of τε approx = 5 μs. Profiles of the effective parallel conductivity clearly indicates the presence of a 'dynamo mechanism' sustaining the field configuration. Higher Θ discharges usually exhibit large oscillations in the F-Θ plane. We find that these oscillations represents macroscopic redistribution of the current in the plasma. A cyclic process is found where the parallel current density (μ-profile) tends to peak in the center and then relax towards a flatter and broader configuration. Towards the end of the discharge there is an increasing fluctuation level along with an increasing V loop /I p - Here we find a relative increase in the current density in the edge region resulting in a hollow μ-profile. (au) (15 refs., 31 figs.)

  13. A better coefficient of determination for genetic profile analysis.

    Science.gov (United States)

    Lee, Sang Hong; Goddard, Michael E; Wray, Naomi R; Visscher, Peter M

    2012-04-01

    Genome-wide association studies have facilitated the construction of risk predictors for disease from multiple Single Nucleotide Polymorphism markers. The ability of such "genetic profiles" to predict outcome is usually quantified in an independent data set. Coefficients of determination (R(2) ) have been a useful measure to quantify the goodness-of-fit of the genetic profile. Various pseudo-R(2) measures for binary responses have been proposed. However, there is no standard or consensus measure because the concept of residual variance is not easily defined on the observed probability scale. Unlike other nongenetic predictors such as environmental exposure, there is prior information on genetic predictors because for most traits there are estimates of the proportion of variation in risk in the population due to all genetic factors, the heritability. It is this useful ability to benchmark that makes the choice of a measure of goodness-of-fit in genetic profiling different from that of nongenetic predictors. In this study, we use a liability threshold model to establish the relationship between the observed probability scale and underlying liability scale in measuring R(2) for binary responses. We show that currently used R(2) measures are difficult to interpret, biased by ascertainment, and not comparable to heritability. We suggest a novel and globally standard measure of R(2) that is interpretable on the liability scale. Furthermore, even when using ascertained case-control studies that are typical in human disease studies, we can obtain an R(2) measure on the liability scale that can be compared directly to heritability. © 2012 Wiley Periodicals, Inc.

  14. Facial profile esthetic preferences: perception in two Brazilian states.

    Science.gov (United States)

    Oliveira, Marina Detoni Vieira de; Silveira, Bruno Lopes da; Mattos, Cláudia Trindade; Marquezan, Mariana

    2015-01-01

    The aim of this study was to assess the regional influence on the perception of facial profile esthetics in Rio de Janeiro state (RJ) and Rio Grande do Sul state (RS), Brazil. Two Caucasian models, a man and a woman, with balanced facial profiles, had their photographs digitally manipulated so as to produce seven different profiles. First year dental students (laypeople) assessed the images and classified them according to their esthetic preference. The result of the t test for independent samples showed differences among states for certain facial profiles. The female photograph identified with the letter 'G' (mandibular retrusion) received higher scores in RS state (p = 0.006). No differences were found for male photographs (p > 0.007). The evaluators' sex seemed not to influence their esthetic perception (p > 0.007). Considering all evaluators together, ANOVA/Tukey's test showed differences among the profiles (p ≤ 0.05) for both male and female photographs. The female photograph that received the highest score was the one identified with the letter 'F' (dentoalveolar bimaxillary retrusion/ straight profile). For the male profiles, photograph identified with the letter 'E' (dentoalveolar bimaxillary protrusion/ straight profile) received the best score. Regional differences were observed regarding preferences of facial profile esthetics. In Rio de Janeiro state, more prominent lips were preferred while in Rio Grande do Sul state, profiles with straight lips were favored. Class III profiles were considered less attractive.

  15. Facial profile esthetic preferences: perception in two Brazilian states

    Science.gov (United States)

    de Oliveira, Marina Detoni Vieira; da Silveira, Bruno Lopes; Mattos, Cláudia Trindade; Marquezan, Mariana

    2015-01-01

    OBJECTIVE: The aim of this study was to assess the regional influence on the perception of facial profile esthetics in Rio de Janeiro state (RJ) and Rio Grande do Sul state (RS), Brazil. METHODS: Two Caucasian models, a man and a woman, with balanced facial profiles, had their photographs digitally manipulated so as to produce seven different profiles. First year dental students (laypeople) assessed the images and classified them according to their esthetic preference. RESULTS: The result of the t test for independent samples showed differences among states for certain facial profiles. The female photograph identified with the letter 'G' (mandibular retrusion) received higher scores in RS state (p = 0.006). No differences were found for male photographs (p > 0.007). The evaluators' sex seemed not to influence their esthetic perception (p > 0.007). Considering all evaluators together, ANOVA/Tukey's test showed differences among the profiles (p ≤ 0.05) for both male and female photographs. The female photograph that received the highest score was the one identified with the letter 'F' (dentoalveolar bimaxillary retrusion/ straight profile). For the male profiles, photograph identified with the letter 'E' (dentoalveolar bimaxillary protrusion/ straight profile) received the best score. CONCLUSION: Regional differences were observed regarding preferences of facial profile esthetics. In Rio de Janeiro state, more prominent lips were preferred while in Rio Grande do Sul state, profiles with straight lips were favored. Class III profiles were considered less attractive. PMID:26154461

  16. Profiles in congenital heart disease

    International Nuclear Information System (INIS)

    Freed, M.D.; Keane, J.F.

    1986-01-01

    Pediatric cardiology has made great strides in the diagnosis, management, and correction of complex congenital malformations in the past two decades. The foundation of these advances is a more precise understanding of the physiology and anatomy of complex lesions that has been obtained from cardiac catheterization and angiography. The techniques for catheterization of infants and children have been discussed in another paper. This chapter focuses on brief profiles of some of the more important congenital abnormalities. The incidence cited in the discussion of each abnormality pertains to a population comprises of children and adults referred to The Children's Hospital Medical Center and Peter Bent Brigham Hospital, respectively, for evaluation of congenital heart disease

  17. Chemical profiling of gaharu oil

    International Nuclear Information System (INIS)

    Mat Rasol Awang; Mohd Fajri Osman; Ahsanulkhaliqin Abd Wahab; Khairuddin Abdul Rahim; Shaiful Azuar Mohamad

    2006-01-01

    Gaharu oil from Aquilaria agallocha and Aquilaria malaccensis Lamk has been reported to contain different phytochemicals components (Ishihara et al., 1993). There are also differences reported by gaharu oil suppliers. The differences suggested they originate from varied of sources of gaharu wood, oleoresin maturity and extraction technology employed. In this study, gaharu oil purchased from different sources were initially analysed and later cross-examined against chemical components of oil extracted from wood sources systematically graded. The gaharu oil components obtained from this work will be presented and discussed. Initiative to profile oil provides impetus to database development and standardisation of gaharu oil. (Author)

  18. Wavelength-independent laser beam shaping

    CSIR Research Space (South Africa)

    Degama, MP

    2010-07-01

    Full Text Available This paper presents a beam shaping device namely, a Diffractive Optical Element (DOE), which is used to change a beam having a Gaussian intensity profile into a beam with a uniform intensity profile. The DOE used in this work was fabricated from Zn...

  19. Variations in Decision-Making Profiles by Age and Gender: A Cluster-Analytic Approach

    Science.gov (United States)

    Delaney, Rebecca; Strough, JoNell; Parker, Andrew M.; de Bruin, Wandi Bruine

    2015-01-01

    Using cluster-analysis, we investigated whether rational, intuitive, spontaneous, dependent, and avoidant styles of decision making (Scott & Bruce, 1995) combined to form distinct decision-making profiles that differed by age and gender. Self-report survey data were collected from 1,075 members of RAND’s American Life Panel (56.2% female, 18–93 years, Mage = 53.49). Three decision-making profiles were identified: affective/experiential, independent/self-controlled, and an interpersonally-oriented dependent profile. Older people were less likely to be in the affective/experiential profile and more likely to be in the independent/self-controlled profile. Women were less likely to be in the affective/experiential profile and more likely to be in the interpersonally-oriented dependent profile. Interpersonally-oriented profiles are discussed as an overlooked but important dimension of how people make important decisions. PMID:26005238

  20. Variations in Decision-Making Profiles by Age and Gender: A Cluster-Analytic Approach.

    Science.gov (United States)

    Delaney, Rebecca; Strough, JoNell; Parker, Andrew M; de Bruin, Wandi Bruine

    2015-10-01

    Using cluster-analysis, we investigated whether rational, intuitive, spontaneous, dependent, and avoidant styles of decision making (Scott & Bruce, 1995) combined to form distinct decision-making profiles that differed by age and gender. Self-report survey data were collected from 1,075 members of RAND's American Life Panel (56.2% female, 18-93 years, M age = 53.49). Three decision-making profiles were identified: affective/experiential, independent/self-controlled, and an interpersonally-oriented dependent profile. Older people were less likely to be in the affective/experiential profile and more likely to be in the independent/self-controlled profile. Women were less likely to be in the affective/experiential profile and more likely to be in the interpersonally-oriented dependent profile. Interpersonally-oriented profiles are discussed as an overlooked but important dimension of how people make important decisions.

  1. Autonomy and independence in language learning

    CERN Document Server

    Benson, Phil

    2014-01-01

    The topics of autonomy and independence play an increasingly important role in language education. They raise issues such as learners' responsibility for their own learning, and their right to determine the direction of their own learning, the skills which can be learned and applied in self-directed learning and capacity for independent learning and the extents to which this can be suppressed by institutional education. This volume offers new insights into the principles of autonomy and independence and the practices associated with them focusing on the area of EFL teaching. The editors' introduction provides the context and outlines the main issues involved in autonomy and independence. Later chapters discuss the social and political implications of autonomy and independence and their effects on educational structures. The consequences for the design of learner-centred materials and methods is discussed, together with an exploration of the practical ways of implementing autonomy and independence in language ...

  2. Component Repair Times Obtained from MSPI Data

    International Nuclear Information System (INIS)

    Eide, Steven A.; Cadwallader, Lee

    2015-01-01

    Information concerning times to repair or restore equipment to service given a failure is valuable to probabilistic risk assessments (PRAs). Examples of such uses in modern PRAs include estimation of the probability of failing to restore a failed component within a specified time period (typically tied to recovering a mitigating system before core damage occurs at nuclear power plants) and the determination of mission times for support system initiating event (SSIE) fault tree models. Information on equipment repair or restoration times applicable to PRA modeling is limited and dated for U.S. commercial nuclear power plants. However, the Mitigating Systems Performance Index (MSPI) program covering all U.S. commercial nuclear power plants provides up-to-date information on restoration times for a limited set of component types. This paper describes the MSPI program data available and analyzes the data to obtain median and mean component restoration times as well as non-restoration cumulative probability curves. The MSPI program provides guidance for monitoring both planned and unplanned outages of trains of selected mitigating systems deemed important to safety. For systems included within the MSPI program, plants monitor both train UA and component unreliability (UR) against baseline values. If the combined system UA and UR increases sufficiently above established baseline results (converted to an estimated change in core damage frequency or CDF), a ''white'' (or worse) indicator is generated for that system. That in turn results in increased oversight by the US Nuclear Regulatory Commission (NRC) and can impact a plant's insurance rating. Therefore, there is pressure to return MSPI program components to service as soon as possible after a failure occurs. Three sets of unplanned outages might be used to determine the component repair durations desired in this article: all unplanned outages for the train type that includes the component of

  3. Component Repair Times Obtained from MSPI Data

    Energy Technology Data Exchange (ETDEWEB)

    Eide, Steven A. [Curtiss-Wright/Scietech, Ketchum, ID (United States); Cadwallader, Lee [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-05-01

    Information concerning times to repair or restore equipment to service given a failure is valuable to probabilistic risk assessments (PRAs). Examples of such uses in modern PRAs include estimation of the probability of failing to restore a failed component within a specified time period (typically tied to recovering a mitigating system before core damage occurs at nuclear power plants) and the determination of mission times for support system initiating event (SSIE) fault tree models. Information on equipment repair or restoration times applicable to PRA modeling is limited and dated for U.S. commercial nuclear power plants. However, the Mitigating Systems Performance Index (MSPI) program covering all U.S. commercial nuclear power plants provides up-to-date information on restoration times for a limited set of component types. This paper describes the MSPI program data available and analyzes the data to obtain median and mean component restoration times as well as non-restoration cumulative probability curves. The MSPI program provides guidance for monitoring both planned and unplanned outages of trains of selected mitigating systems deemed important to safety. For systems included within the MSPI program, plants monitor both train UA and component unreliability (UR) against baseline values. If the combined system UA and UR increases sufficiently above established baseline results (converted to an estimated change in core damage frequency or CDF), a “white” (or worse) indicator is generated for that system. That in turn results in increased oversight by the US Nuclear Regulatory Commission (NRC) and can impact a plant’s insurance rating. Therefore, there is pressure to return MSPI program components to service as soon as possible after a failure occurs. Three sets of unplanned outages might be used to determine the component repair durations desired in this article: all unplanned outages for the train type that includes the component of interest, only

  4. Overview of galactic results obtained by MAGIC

    Energy Technology Data Exchange (ETDEWEB)

    Zanin, Roberta

    2013-06-15

    MAGIC is a system of two atmospheric Cherenkov telescopes which explores the very-high-energy sky, from some tens of GeV up to tens of TeV. Located in the Canary island of La Palma, MAGIC has the lowest energy threshold among the instruments of its kind, well suited to study the still poorly explored energy band below 100 GeV. Although the space-borne gamma-ray telescope Fermi/LAT is sensitive up to 300 GeV, gamma-ray rates drop fast with increasing energy, so γ-ray collection areas larger than 10{sup 4}m{sup 2}, as those provided by grounds-based instruments, are crucial above a few GeV. The combination of MAGIC and Fermi/LAT observations have provided the first astrophysical spectra sampled in the inverse Compton peak region, resulting in a complete coverage from MeV up to TeV energies, as well as the discovery of a pulsed emission in the very-high-energy band. This paper focuses on the latest results on Galactic sources obtained by MAGIC which are highlighted by the detection of the pulsed gamma-ray emission from the Crab pulsar up to 400 GeV. In addition, we will present the morphological study on the W51 complex which allowed to pinpoint the location of the majority of the emission around the interaction point between the supernova remnant W51C and the star forming region W51B, but also to find a possible contribution from the associated pulsar wind nebula. Other important scientific achievements involve the Crab Nebula with an unprecedented spectrum covering three decades in energy starting from 50 GeV and a morphological study of the unidentified source HESS J1857+026 which supports the pulsar wind nebula scenario. Finally we will report on the searches of very-high-energy signals from gamma-ray binaries, mainly LS I 303+ and HESS J0632+057.

  5. Calibration and Propagation of Uncertainty for Independence

    Energy Technology Data Exchange (ETDEWEB)

    Holland, Troy Michael [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kress, Joel David [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bhat, Kabekode Ghanasham [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-06-30

    This document reports on progress and methods for the calibration and uncertainty quantification of the Independence model developed at UT Austin. The Independence model is an advanced thermodynamic and process model framework for piperazine solutions as a high-performance CO2 capture solvent. Progress is presented in the framework of the CCSI standard basic data model inference framework. Recent work has largely focused on the thermodynamic submodels of Independence.

  6. Advanced practice nurses: starting an independent practice.

    Science.gov (United States)

    Lambert, V A; Lambert, C E

    1996-01-01

    Independent or private practice is the delivery of nursing services provided by nurses over which nurses have full control. With a changing healthcare system, nurses are in a prime position to negotiate the delivery of appropriate, acceptable, and cost-effective health care as independent practitioners. This article addresses the mission and goals of independent practice, community need, business structure of the practice, housing the practice, legal considerations, financing the practice, marketing issues, clientele, record keeping, and reimbursement.

  7. High resolution humidity, temperature and aerosol profiling with MeteoSwiss Raman lidar

    Science.gov (United States)

    Dinoev, Todor; Arshinov, Yuri; Bobrovnikov, Sergei; Serikov, Ilya; Calpini, Bertrand; van den Bergh, Hubert; Parlange, Marc B.; Simeonov, Valentin

    2010-05-01

    derive vertical profiles of aerosol backscatter ratio and aerosol extinction at 355 nm. Set of Stokes and anti-Stokes PRR lines are separated by the polychromator to derive temperature profiles. The humidity profiles have vertical resolution from 15 m (within the boundary layer) to 100-450 m (within the free troposphere), time resolution of 30 min and 5 km vertical range at daytime and 10 km at night-time. The aerosol backscatter ratio and extinction profiles have similar resolution with vertical range of approximately 10 km. The temperature profiles are derived from PRR lidar signals, simultaneously recorded in analog and photon counting mode, allowing vertical range of approximately 10 km. Vaisala RS-92 and Snow-White chilled mirror hygrometer radiosondes were used for calibration of the water vapor and temperature channels. Continuous temperature profiles were obtained and were coupled with the available water vapor mixing ratio profiles to obtain relative humidity time series. Lidar derived aerosol backscatter ratio profiles will be used for estimation of the boundary layer height and validation of NWP model results. Optical thickness time series are currently compared to independent measurements from a collocated sun photometer to assess the performance of the aerosol channel.

  8. HEART RATE VARIABILITY PARAMETERS IN PATIENTS WITH ARTERIAL HYPERTENSION IN DEPENDENCE ON THE TYPE OF DAILY BLOOD PRESSURE PROFILE

    Directory of Open Access Journals (Sweden)

    S. G. B. K. Gorantla

    2017-06-01

    Full Text Available Violation of functioning of the autonomic nervous system is an important factor in the formation and progression of arterial hypertension (AH. Abnormal nocturnal blood pressure (BP reduction is regarded as an independent prognostic factor for cardiovascular complications in patients with AH. One of the possible factors that determine the violation of BP circadian rhythm can be imbalance of different parts of autonomic nervous system. The aim of our study was to study heart rate variability (HRV in patients with AH, dependently of BP profile. 72 patients with AH were examined. Average age was 57 ± 11 years. All patients underwent ambulatory BP (ABPM and ECG monitoring. To define the daily profile the nocturnal BP dip was quantified and for HRV evaluation the frequency analysis method was used. HRV changes in patients with AH present with reduced total power and with a violation in the ratio of the powers of very low, low and high frequencies, enhanced sympathycotension and influence of humoral factors. Violations of systolic BP (SBP daily profile was mainly characterized by an increase in the power of low frequency waves, which indicates an intensification of sympathetic and decreased parasympathetic influences. Violations of diastolic BP (DBP daily profile were mainly characterized by a relative increase in the power of very low frequency waves. The obtained results showed that in the management of patients with AH it is important not only to control the circadian SBP and DBP profiles, but the evaluation of HRV also.

  9. Diagnostic efficacy for coronary in-stent patency with parameters defined on Hounsfield CT value-spatial profile curves

    International Nuclear Information System (INIS)

    Yamazaki, Tadashi; Suzuki, Jun-ichi; Shimamoto, Ryoichi; Tsuji, Taeko; Ohmoto-Sekine, Yuki; Morita, Toshihiro; Yamashita, Hiroshi; Honye, Junko; Nagai, Ryozo; Komatsu, Shuhei; Akahane, Masaaki; Ohtomo, Kuni

    2008-01-01

    Purpose: Hounsfield CT values across coronary CT angiograms constitute CT value-spatial profile curves. These CT profile curves are independent of window settings, and therefore, parameters derived from the curves can be used for objective anatomic analyses. Applicability of parameters derived from the curves to quantification of coronary in-stent patency has not yet been evaluated. Methods: Twenty-five CT value-spatial profile curves were delineated from 10 consecutive coronary stents to test correlation between the curve derived parameter (i.e., the minimum extreme value normalized by dividing by the maximum value of the curves obtained at neighboring outside of stents) and three intravascular ultrasound (IVUS) parameters. Results: Correlation coefficients between normalized minimum extreme value of CT value-spatial profile curves and three IVUS parameters (such as patent cross-sectional in-stent area, the percentage of patent cross-sectional in-stent area, and coronary artery intra-stent diameter) were 0.65 (p < 0.01), 0.44 (p < 0.05) and 0.51 (p < 0.05), respectively. Conclusions: CT parameters defined on Hounsfield CT value-spatial profile curves correlated significantly with IVUS parameters for quantitative coronary in-stent patency. A new approach with CT coronary angiography is therefore indicated for the noninvasive assessment of in-stent re-stenosis

  10. Changes in the aromatic profile of espresso coffee as a function of the grinding grade and extraction time: a study by the electronic nose system.

    Science.gov (United States)

    Severini, C; Ricci, I; Marone, M; Derossi, A; De Pilli, T

    2015-03-04

    The changes in chemical attributes and aromatic profile of espresso coffee (EC) were studied taking into account the extraction time and grinding level as independent variables. Particularly, using an electronic nose system, the changes of the global aromatic profile of EC were highlighted. The results shown as the major amounts of organic acids, solids, and caffeine were extracted in the first 8 s of percolation. The grinding grade significantly affected the quality of EC probably as an effect of the particle size distribution and the percolation pathways of water through the coffee cake. The use of an electronic nose system allowed us to discriminate the fractions of the brew as a function of the percolation time and also the regular coffee obtained from different grinding grades. Particularly, the aromatic profile of a regular coffee (25 mL) was significantly affected by the grinding level of the coffee grounds and percolation time, which are two variables under the control of the bar operator.

  11. Polar measurements on profiles

    Energy Technology Data Exchange (ETDEWEB)

    Althaus, D.

    1985-03-01

    Wind tunnel models with a profile depth of t=0.5 m were measured in a laminar wind tunnel by the usual measuring processes. The profile resistance was determined by integration along the width of span. The smooth profiles were examined at Re=0.7/1.0 and 1.5 million. At Re=1.0 million, the position of the changeover points were determined with a stethoscope. Also at this Reynolds number measurements were taken with a trip wire of d=2 mm diameter, directly on the profile nose. The tables contain the co-ordinates of the profiles, the contours, the theoretical speed distributions for 4 different angles of attack, the csub(a)-csub(w) polar measurements and changeover points, and the torque coefficients around the t/4 point. (BR).

  12. Implicit User Interest Profile

    CERN Document Server

    Chan, K

    2002-01-01

    User interest profile presents items that the users are interested in. Typically those items can be listed or grouped. Listing is good but it does not possess interests at different abstraction levels - the higher-level interests are more general, while the lower-level ones are more specific. Furthermore, more general interests, in some sense, correspond to longer-term interests, while more specific interests correspond to shorter-term interests. This hierarchical user interest profile has obvious advantages: specifying user's specific interests and general interests and representing their relationships. Current user interest profile structures mostly do not use implicit method, nor use an appropriate clustering algorithm especially for conceptually hierarchical structures. This research studies building a hierarchical user interest profile (HUIP) and the hierarchical divisive algorithm (HDC). Several users visit hundreds of web pages and each page is recorded in each users profile. These web pages are used t...

  13. Agricultural Pilot's Audiological Profile

    Directory of Open Access Journals (Sweden)

    Foltz, Lucas

    2010-09-01

    Full Text Available Introduction: The agricultural airplane pilot are daily exposed to intense noises, being susceptible to the noise-induced hearing loss (NIHL and its auditory and extra auditory effects. Objective: To analyze the audiological profile of this population, verifying the work's influence on its hearing. Method: It was realized a retrospective, individual, observational, and cross-sectional study through the data obtained by means of a questionnaire and audiometric thresholds of 41 agricultural pilots. To the statistical analysis were utilized the chi-square, Spearman, and Wilcoxon tests with significance level of 5%. Results: It was verified that 95,1% of the pilots use PPE ( personal protective equipment during flight and 58,5% have contact with pesticides. More than half of individuals referred to feel auditory and extra auditory symptoms, being the buzz the more frequent (29,1%. It has the occurrence of 29,3% of NIHL suggestive hearing loss and 68,3% of normality, taking this presence of unilateral notch in 24,4% and bilateral notch in 31,7%. It was found correlation statistically significant in the associations between time of service and the average of the acute frequencies in the right ear (p=0038, and in the left ear (p=0,010. It has a statistical tendency in the association between audiometric configuration and contact with pesticides (p=0,088. Conclusion: The hearing loss prevalence in this study was showed high. More than half of the sample has normal audiometric thresholds with notch configuration. Such data lead to the conclusion that the agricultural pilots, even with PPE use, they still suffer with the damages caused by noise, needing best proposals of hearing loss prevention.

  14. Anterior corneal profile with variable asphericity.

    Science.gov (United States)

    Rosales, Marco A; Juárez-Aubry, Montserrat; López-Olazagasti, Estela; Ibarra, Jorge; Tepichín, Eduardo

    2009-12-10

    We present a corneal profile in which the eccentricity, e(Q=-e(2)), has a nonlinear continuous variation from the center outwards. This nonlinear variation is intended to fit and reproduce our current experimental data in which the anterior corneal surface of the human eye exhibits different values of e at different diameters. According to our clinical data, the variation is similar to an exponential decay. We propose a linear combination of two exponential functions to describe the variation of e. We then calculate the corneal sagittal height by substituting e in the first-order aspherical surface equation to obtain the corneal profile. This corneal profile will be used as a reference to analyze the resultant profiles of the customized corneal ablation in refractive surgery.

  15. Utilization of Weibull equation to obtain soil-water diffusivity in horizontal infiltration

    International Nuclear Information System (INIS)

    Guerrini, I.A.

    1982-06-01

    Water movement was studied in horizontal infiltration experiments using laboratory columns of air-dry and homogeneous soil to obtain a simple and suitable equation for soil-water diffusivity. Many water content profiles for each one of the ten soil columns utilized were obtained through gamma-ray attenuation technique using a 137 Cs source. During the measurement of a particular water content profile, the soil column was held in the same position in order to measure changes in time and so to reduce the errors in water content determination. The Weibull equation utilized was excellent in fitting water content profiles experimental data. The use of an analytical function for ν, the Boltzmann variable, according to Weibull model, allowed to obtain a simple equation for soil water diffusivity. Comparisons among the equation here obtained for diffusivity and others solutions found in literature were made, and the unsuitability of a simple exponential variation of diffusivity with water content for the full range of the latter was shown. The necessity of admitting the time dependency for diffusivity was confirmed and also the possibility fixing that dependency on a well known value extended to generalized soil water infiltration studies was found. Finally, it was shown that the soil water diffusivity function given by the equation here proposed can be obtained just by the analysis of the wetting front advance as a function of time. (Author) [pt

  16. Two-dimensional dopant profiling for shallow junctions by TEM and AFM

    International Nuclear Information System (INIS)

    Yoo, K.

    2000-01-01

    The present work concerns the development of the Etch/TEM and Etch/AFM methods to obtain quantitative 2-D dopant profiles for the ultra shallow p-n junctions of the next generation of metal-oxide-semiconductor field effect transistors (MOSFETs). For these methods, thin foil (TEM) or bulk (AFM) cross-sectional specimens were etched using a dopant selective chemical so that local areas of the dopant implanted source/drain (S/D) regions were etched to different depths. The surface topography of the S/D regions was determined from the thickness fringes for the TEM method and by the direct measurement for the AFM method. The local etched depths were converted to etch rates, and these were then converted to corresponding 1-D and 2-D dopant profiles by the experimentally independent etch rate calibration curves. Shallow junction MOSFET samples were designed and fabricated with junction depths 60nm (n + /p), 80nm (n + /p) and 120nm (p + /n) using 0.25μm process technology. A new method using SOG (Spin-on-Glass) contributed to the high quality XTEM thin foil specimens. Controlled stirring of the etchant increased the dopant concentration selectivity and etching consistency. Computer modelling simulated the isotropic etching behaviours, which can introduce the significant error in dopant profiling for shallow and abrupt junction samples. Comprehensive quantitative results enabled the optimum etching time to be determined for the first time. Etch/TEM method gave 1-D dopant profiles that showed good agreement with 1-D Spreading Resistance Probe (SRP) dopant profiles for determining junction depths. 2-D dopant profiles gave L eff , i.e. the shortest lateral distance between the S/D junctions, of major importance for MOSFET performance. Values for L eff of 161, 159 and 123nm were determined from 60, 80 and 120nm junction depth samples respectively, compared with the 215nm MOSFET gate length. The resolution and accuracy of the Etch/TEM method are estimated as 2 and 10nm

  17. Entropy-Based Privacy against Profiling of User Mobility

    Directory of Open Access Journals (Sweden)

    Alicia Rodriguez-Carrion

    2015-06-01

    Full Text Available Location-based services (LBSs flood mobile phones nowadays, but their use poses an evident privacy risk. The locations accompanying the LBS queries can be exploited by the LBS provider to build the user profile of visited locations, which might disclose sensitive data, such as work or home locations. The classic concept of entropy is widely used to evaluate privacy in these scenarios, where the information is represented as a sequence of independent samples of categorized data. However, since the LBS queries might be sent very frequently, location profiles can be improved by adding temporal dependencies, thus becoming mobility profiles, where location samples are not independent anymore and might disclose the user’s mobility patterns. Since the time dimension is factored in, the classic entropy concept falls short of evaluating the real privacy level, which depends also on the time component. Therefore, we propose to extend the entropy-based privacy metric to the use of the entropy rate to evaluate mobility profiles. Then, two perturbative mechanisms are considered to preserve locations and mobility profiles under gradual utility constraints. We further use the proposed privacy metric and compare it to classic ones to evaluate both synthetic and real mobility profiles when the perturbative methods proposed are applied. The results prove the usefulness of the proposed metric for mobility profiles and the need for tailoring the perturbative methods to the features of mobility profiles in order to improve privacy without completely loosing utility.

  18. 12 CFR 564.5 - Appraiser independence.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Appraiser independence. 564.5 Section 564.5 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY APPRAISALS § 564.5 Appraiser independence. (a) Staff appraisers. If an appraisal is prepared by a staff appraiser, that appraiser must be...

  19. Becoming independent through au pair migration

    DEFF Research Database (Denmark)

    Dalgas, Karina Märcher

    2015-01-01

    . This article argues that, despite this critique, au pairing does play an important formative role for young Filipinas because it opens up for experiences abroad that enable them to be recognised as independent adults in Philippine society. Rather than autonomy, however, au pairs define their independence...

  20. Uniqueness of time-independent electromagnetic fields

    DEFF Research Database (Denmark)

    Karlsson, Per W.

    1974-01-01

    As a comment on a recent paper by Steele, a more general uniqueness theorem for time-independent fields is mentioned. ©1974 American Institute of Physics......As a comment on a recent paper by Steele, a more general uniqueness theorem for time-independent fields is mentioned. ©1974 American Institute of Physics...

  1. Outer-2-independent domination in graphs

    Indian Academy of Sciences (India)

    independent dominating set of a graph is a set of vertices of such that every vertex of ()\\ has a neighbor in and the maximum vertex degree of the subgraph induced by ()\\ is at most one. The outer-2-independent domination ...

  2. An architecture for device independent interfacing

    International Nuclear Information System (INIS)

    Pace, D.M.

    1990-01-01

    Achieving device independence for software applications is required for all but a small number of critical real time applications. Device independence is achieved by establishing protocols and building protocol interpreters for the specific devices. Data structures containing pointers to functions provide a flexible architecture for implementing protocol translation. 3 refs., 5 figs

  3. Institutional independence and the constitutionality of legislation ...

    African Journals Online (AJOL)

    The test for determining whether judicial independence is safeguarded is an objective one based on public confidence in the structure of the court and the ... in the analysis of the application of the principles of judicial independence to specific legislative schemes where the structure of the tribunal thereby established had ...

  4. 48 CFR 3.103 - Independent pricing.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Independent pricing. 3.103 Section 3.103 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION GENERAL IMPROPER BUSINESS PRACTICES AND PERSONAL CONFLICTS OF INTEREST Safeguards 3.103 Independent pricing. ...

  5. Accounting for Independent Schools. Second Edition.

    Science.gov (United States)

    National Association of Independent Schools, Boston, MA.

    This is a thoroughly revised edition of the 1969 publication, "Accounting for Independent Schools," a guide that attempted to codify basic accounting principles and practices for specific application to independent schools. The focus of the second edition is more on refining practices than on initiating them, and more on extending the managerial…

  6. Central bank independence and financial instability

    NARCIS (Netherlands)

    Klomp, J.G.; de Haan, J.

    2009-01-01

    It has been argued that central bank independence (CBI) may not only be beneficial for reaching the objective of price stability, but also for maintaining financial stability. Greater independence from external pressure implies that central banks are less politically constrained in acting to prevent

  7. 47 CFR 64.904 - Independent audits.

    Science.gov (United States)

    2010-10-01

    ... independent auditor every two years, covering the prior two year period, or have a financial audit performed by an independent auditor every two years, covering the prior two year period. In either case, the... of the auditor's report. At least 30 days prior to beginning the attestation engagement, the...

  8. A predictable Java profile

    DEFF Research Database (Denmark)

    Bøgholm, Thomas; Hansen, Rene Rydhof; Ravn, Anders Peter

    2009-01-01

    A Java profile suitable for development of high integrity embedded systems is presented. It is based on event handlers which are grouped in missions and equipped with respectively private handler memory and shared mission memory. This is a result of our previous work on developing a Java profile......, and is directly inspired by interactions with the Open Group on their on-going work on a safety critical Java profile (JSR-302). The main contribution is an arrangement of the class hierarchy such that the proposal is a generalization of Real-Time Specification for Java (RTSJ). A further contribution...

  9. Profiling the Mobile Customer

    DEFF Research Database (Denmark)

    Jessen, Pernille Wegener; King, Nancy J.

    2010-01-01

    of significant concerns about privacy and data protection. This second article in a two part series on "Profiling the Mobile Customer" explores how to best protect consumers' privacy and personal data through available mechanisms that include industry self-regulation, privacy-enhancing technologies...... discusses the current limitations of using technology to protect consumers from privacy abuses related to profiling. Concluding that industry self-regulation and available privacy-enhancing technologies will not be adequate to close important privacy gaps related to consumer profiling without legislative...

  10. A new method for depth profiling

    International Nuclear Information System (INIS)

    Chittleborough, C.W.; Chaudhri, M.A.; Rouse, J.L.

    1978-01-01

    A simple method for obtaining depth profiles of concentrations has been developed for charged particle induced nuclear reactions which produce γ-rays or neutrons. This method is particularly suitable for non-resonant reactions but is also applicable to resonant reactions and can examine the concentration of the sought nuclide throughout the entire activation depth of the incoming particles in the matrix

  11. Study of dose profile in TC scanning of cranium; Estudo do perfil de dose em varredura de TC de cranio

    Energy Technology Data Exchange (ETDEWEB)

    Goncalves Junior, R.L.; Oliveira, A.H., E-mail: heeren@nuclear.ufmg.b [Universidade Federal de Minas Gerais (DEN/UFMG), Belo Horizonte (Brazil). Dept. de Engenharia Nuclear; Mourao, A.P., E-mail: aprata@des.cefetmg.b [Centro Federal de Educacao Tecnologica de Minas Gerais (CEFET-MG), Belo Horizonte MG (Brazil). Nucleo de Engenharia Hospitalar

    2011-10-26

    In this paper it was obtained a dose distribution profile in computerized tomography, when a head simulator object, cylindrical and manufactured in PMMA, were swiped by using the clinical protocol or this device routine. The doses were determined with radiochromic films placed at the four cardinal points and the Center, taking as reference one of object faces. The films were calibrated with pencil ionization chamber in a independent experiment where the obtained doses in the chamber, when a unique central cut or the object were obtained, were confronted with the gray scales on the irradiated films in a similar manner, revealing he factors of conversion mGy.Gray tones{sup -1} which made possible the determination of doses in all the scanning

  12. Physical Profiling Performance of Air Force Primary Care Providers

    Science.gov (United States)

    2017-08-09

    AFRL-SA-WP-TR-2017-0014 Physical Profiling Performance of Air Force Primary Care Providers Anthony P. Tvaryanas1; William P...COVERED (From – To) September 2016 – January 2017 4. TITLE AND SUBTITLE Physical Profiling Performance of Air Force Primary Care Providers...encounter with their primary care team. An independent medical standards subject matter expert (SME) reviewed encounters in the electronic health record

  13. Metabolic Profiling of Impaired Cognitive Function in Patients Receiving Dialysis

    OpenAIRE

    Kurella Tamura, Manjula; Chertow, Glenn M.; Depner, Thomas A.; Nissenson, Allen R.; Schiller, Brigitte; Mehta, Ravindra L.; Liu, Sai; Sirich, Tammy L.

    2016-01-01

    Retention of uremic metabolites is a proposed cause of cognitive impairment in patients with ESRD. We used metabolic profiling to identify and validate uremic metabolites associated with impairment in executive function in two cohorts of patients receiving maintenance dialysis. We performed metabolic profiling using liquid chromatography/mass spectrometry applied to predialysis plasma samples from a discovery cohort of 141 patients and an independent replication cohort of 180 patients partici...

  14. Ti(r) profiles from the JET neutron profile monitor for ohmic discharges

    Energy Technology Data Exchange (ETDEWEB)

    Esposito, B. (ENEA, Frascati (Italy). Centro Ricerche Energia); Marcus, F.B.; Conroy, S.; Jarvis, O.N.; Loughlin, M.J.; Sadler, G.; Belle, P. van (Commission of the European Communities, Abingdon (United Kingdom). JET Joint Undertaking); Adams, J.M.; Watkins, N. (AEA Industrial Technology, Harwell (United Kingdom))

    1991-01-01

    A study has been made of the neutron emissivity, using the JET neutron profile monitor, obtained for ohmically heated deuterium discharges. Both one-dimensional (1-D) best-fit inversion procedures and 2-D tomography have been used to deduce the radial profile of the neutron emission from the line-integral data. The profiles of ion temperature and ion thermal conductivity are then derived. The scaling of the ion thermal conductivity with plasma current is found to be opposite to that of neoclassical theory. (author) 4 refs., 5 figs.

  15. Profiles of the Hα line by means of the analogical television system

    International Nuclear Information System (INIS)

    Andrillat, Y.; Fehrenbach, Ch.

    1981-01-01

    High resolution profiles of the Hα line are derived for about thirty Be stars and several bright stars by means of the analogical television system. The profiles obtained with this method fairly agree with the theoretical ones (α Lyrae). (Auth.)

  16. PPARα-independent transcriptional targets of perfluoroalkyl acids revealed by transcript profiling

    Data.gov (United States)

    U.S. Environmental Protection Agency — Microarray datasets used in the analysis. This dataset is associated with the following publication: Rosen, M., K. Das, J. Rooney, B. Abbott, C. Lau, and C. Corton....

  17. DNA profiling of trace DNA recovered from bedding.

    Science.gov (United States)

    Petricevic, Susan F; Bright, Jo-Anne; Cockerton, Sarah L

    2006-05-25

    Trace DNA is often detected on handled items and worn clothing examined in forensic laboratories. In this study, the potential transfer of trace DNA to bedding by normal contact, when an individual sleeps in a bed, is examined. Volunteers slept one night on a new, lower bed sheet in their own bed and one night in a bed foreign to them. Samples from the sheets were collected and analysed by DNA profiling. The results indicate that the DNA profile of an individual can be obtained from bedding after one night of sleeping in a bed. The DNA profile of the owner of the bed could also be detected in the foreign bed experiments. Since mixed DNA profiles can be obtained from trace DNA on bedding, caution should be exercised when drawing conclusions from DNA profiling results obtained from such samples. This transfer may have important repercussions in sexual assault investigations.

  18. Psychometric Properties of Dunn\\'s Sensory Profile School Companion

    Directory of Open Access Journals (Sweden)

    Guita Movallali

    2017-10-01

    Conclusion The results showed that Dunn's sensory profile has good reliability and validity. Dunn's sensory profile is a useful tool for assessing sensory processing patterns in school and kindergarten settings, and can be used by occupational therapists in clinical environments and by psychologists in educational environments. Information obtained from this profile can have diagnostic value and could also be used for the design of curriculum and classroom space.

  19. Profile reconstruction from neutron reflectivity data and a priori knowledge

    International Nuclear Information System (INIS)

    Leeb, H.

    2008-01-01

    The problem of incomplete and noisy information in profile reconstruction from neutron reflectometry data is considered. In particular methods of Bayesian statistics in combination with modelling or inverse scattering techniques are considered in order to properly include the required a priori knowledge to obtain quantitatively reliable estimates of the reconstructed profiles. Applying Bayes theorem the results of different experiments on the same sample can be consistently included in the profile reconstruction

  20. Wind Profiling Radar

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Clutter present in radar return signals as used for wind profiling is substantially removed by carrying out a Daubechies wavelet transformation on a time series of...

  1. Fishing fleet profiling methodology

    National Research Council Canada - National Science Library

    Ferraris, Jocelyne

    2002-01-01

    A fishing fleet profile aims tho assist in understanding the complexity and structure of fisheries from a technical and socio-economic point of view, or from the point of view of fishing strategies...

  2. Beach Profile Locations

    Data.gov (United States)

    California Natural Resource Agency — Beaches are commonly characterized by cross-shore surveys. The resulting profiles represent the elevation of the beach surface and nearshore seabed from the back of...

  3. Secretaries: A Profile.

    Science.gov (United States)

    Fusselman, Kay

    1987-01-01

    Consists of the results of a profile survey completed by more than 12,000 members of Professional Secretaries International. Information is included on secretarial titles, salaries, employer types, and secretaries' personal characteristics. (CH)

  4. Prescription Drug Profiles PUF

    Data.gov (United States)

    U.S. Department of Health & Human Services — This release contains the Prescription Drug Profiles Public Use Files (PUFs) drawn from Medicare prescription drug claims for the year of the date on which the...

  5. Fishing Community Profiles

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — To enable fisheries managers to comply with National Standard 8 (NS8), NMFS social scientists around the nation are preparing fishing community profiles that present...

  6. Reflections on independence in nurse practitioner practice.

    Science.gov (United States)

    Weiland, Sandra A

    2008-07-01

    To examine factors that influence the ability of nurse practitioners (NPs) to practice as independent primary care providers. Extensive literature search on CINAHL, OVID, MEDLINE, Internet journal sources, and professional association Web sites. The legal authority for NPs to practice independently is recognized; however, the ability to put that authority into practice is undermined by the historical failure of political, professional, and social entities to recognize NPs as providers capable of providing primary care autonomously. Nonrecognition is responsible for complex reimbursement policies (both federal and state) that economically and professionally restrain the NP role; hence, NPs remain in a financially dependent relationship despite 40 years of proven safe practice. NPs must articulate their independence as practitioners more vociferously in order to meet society's healthcare requirements, as well as to attain professional fulfillment and forge collegial relationships. NPs will never be seen as members of a profession by either themselves or others without the practicality of independence and autonomy. Although legal independence is a fact, real practice independence in the pragmatic sense is contingent upon reimbursement. Without fiscal sustainability, practice independence is an impossibility. And, without professional autonomy, NPs will have only an employee's voice in the dynamic healthcare system in which they are really key players in providing healthcare services to the poor and undeserved populations.

  7. Global oil company profiles

    International Nuclear Information System (INIS)

    1997-01-01

    Global Oil Company Profiles provides a comprehensive review of 50 of the top oil companies in the world. Each chapter is devoted to an individual company, providing an invaluable insight into the organisation, its structure and operations. Using the most recent data available, the report offers an up-to-date analysis of performance and future direction, as well as a unique benchmarking system for each company profiled. (author)

  8. Laquinimod Safety Profile

    DEFF Research Database (Denmark)

    Sørensen, Per Soelberg; Comi, Giancarlo; Vollmer, Timothy L

    2017-01-01

    the safety profile of laquinimod versus placebo. Adverse events (AEs), laboratory value changes, and potential risks identified in preclinical studies were evaluated in participants in ALLEGRO and BRAVO treated with at least one dose of laquinimod or matching placebo (1:1 random assignment). RESULTS...... laquinimod studies demonstrate a safety profile comprising benign or manageable AEs and asymptomatic laboratory findings with a clear temporal pattern. Potential risks noted in preclinical studies were not observed....

  9. Household electricity demand profiles

    DEFF Research Database (Denmark)

    Marszal, Anna Joanna; Heiselberg, Per Kvols; Larsen, Olena Kalyanova

    2016-01-01

    Highlights •A 1-min resolution household electricity load model is presented. •Model adapts a bottom-up approach with single appliance as the main building block. •Load profiles are used to analyse the flexibility potential of household appliances. •Load profiles can be applied in other domains, .......g. building energy simulations. •The demand level of houses with different number of occupants is well captured....

  10. Country nuclear power profiles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The preparation of Country Nuclear Power Profiles was initiated within the framework of the IAEA`s programme for nuclear power plant performance assessment and feedback. It responded to a need for a database and a technical document containing a description of the energy and economic situation and the primary organizations involved in nuclear power in IAEA Member States. The task was included in the IAEA`s programmes for 1993/1994 and 1995/1996. In March 1993, the IAEA organized a Technical Committee meeting to discuss the establishment of country data ``profiles``, to define the information to be included in the profiles and to review the information already available in the IAEA. Two expert meetings were convened in November 1994 to provide guidance to the IAEA on the establishment of the country nuclear profiles, on the structure and content of the profiles, and on the preparation of the publication and the electronic database. In June 1995, an Advisory Group meeting provided the IAEA with comprehensive guidance on the establishment and dissemination of an information package on industrial and organizational aspects of nuclear power to be included in the profiles. The group of experts recommended that the profiles focus on the overall economic, energy and electricity situation in the country and on its nuclear power industrial structure and organizational framework. In its first release, the compilation would cover all countries with operating power plants by the end of 1995. It was also recommended to further promote information exchange on the lessons learned from the countries engaged in nuclear programmes. For the preparation of this publication, the IAEA received contributions from the 29 countries operating nuclear power plants and Italy. A database has been implemented and the profiles are supporting programmatic needs within the IAEA; it is expected that the database will be publicly accessible in the future. Refs, figs, tabs.

  11. Country nuclear power profiles

    International Nuclear Information System (INIS)

    1998-03-01

    The preparation of Country Nuclear Power Profiles was initiated within the framework of the IAEA's programme for nuclear power plant performance assessment and feedback. It responded to a need for a database and a technical document containing a description of the energy and economic situation and the primary organizations involved in nuclear power in IAEA Member States. The task was included in the IAEA's programmes for 1993/1994 and 1995/1996. In March 1993, the IAEA organized a Technical Committee meeting to discuss the establishment of country data ''profiles'', to define the information to be included in the profiles and to review the information already available in the IAEA. Two expert meetings were convened in November 1994 to provide guidance to the IAEA on the establishment of the country nuclear profiles, on the structure and content of the profiles, and on the preparation of the publication and the electronic database. In June 1995, an Advisory Group meeting provided the IAEA with comprehensive guidance on the establishment and dissemination of an information package on industrial and organizational aspects of nuclear power to be included in the profiles. The group of experts recommended that the profiles focus on the overall economic, energy and electricity situation in the country and on its nuclear power industrial structure and organizational framework. In its first release, the compilation would cover all countries with operating power plants by the end of 1995. It was also recommended to further promote information exchange on the lessons learned from the countries engaged in nuclear programmes. For the preparation of this publication, the IAEA received contributions from the 29 countries operating nuclear power plants and Italy. A database has been implemented and the profiles are supporting programmatic needs within the IAEA; it is expected that the database will be publicly accessible in the future

  12. BWR AXIAL PROFILE

    International Nuclear Information System (INIS)

    Huffer, J.

    2004-01-01

    The purpose of this calculation is to develop axial profiles for estimating the axial variation in burnup of a boiling water reactor (BWR) assembly spent nuclear fuel (SNF) given the average burnup of an assembly. A discharged fuel assembly typically exhibits higher burnup in the center and lower burnup at the ends of the assembly. Criticality safety analyses taking credit for SNF burnup must account for axially varying burnup relative to calculations based on uniformly distributed assembly average burnup due to the under-burned tips. Thus, accounting for axially varying burnup in criticality analyses is also referred to as accounting for the ''end effect'' reactivity. The magnitude of the reactivity change due to ''end effect'' is dependent on the initial assembly enrichment, the assembly average burnup, and the particular axial profile characterizing the burnup distribution. The set of bounding axial profiles should incorporate multiple BWR core designs and provide statistical confidence (95 percent confidence that 95 percent of the population is bound by the profile) that end nodes are conservatively represented. The profiles should also conserve the overall burnup of the fuel assembly. More background on BWR axial profiles is provided in Attachment I

  13. Accelerated Profile HMM Searches.

    Directory of Open Access Journals (Sweden)

    Sean R Eddy

    2011-10-01

    Full Text Available Profile hidden Markov models (profile HMMs and probabilistic inference methods have made important contributions to the theory of sequence database homology search. However, practical use of profile HMM methods has been hindered by the computational expense of existing software implementations. Here I describe an acceleration heuristic for profile HMMs, the "multiple segment Viterbi" (MSV algorithm. The MSV algorithm computes an optimal sum of multiple ungapped local alignment segments using a striped vector-parallel approach previously described for fast Smith/Waterman alignment. MSV scores follow the same statistical distribution as gapped optimal local alignment scores, allowing rapid evaluation of significance of an MSV score and thus facilitating its use as a heuristic filter. I also describe a 20-fold acceleration of the standard profile HMM Forward/Backward algorithms using a method I call "sparse rescaling". These methods are assembled in a pipeline in which high-scoring MSV hits are passed on for reanalysis with the full HMM Forward/Backward algorithm. This accelerated pipeline is implemented in the freely available HMMER3 software package. Performance benchmarks show that the use of the heuristic MSV filter sacrifices negligible sensitivity compared to unaccelerated profile HMM searches. HMMER3 is substantially more sensitive and 100- to 1000-fold faster than HMMER2. HMMER3 is now about as fast as BLAST for protein searches.

  14. Independence, Odd Girth, and Average Degree

    DEFF Research Database (Denmark)

    Löwenstein, Christian; Pedersen, Anders Sune; Rautenbach, Dieter

    2011-01-01

      We prove several tight lower bounds in terms of the order and the average degree for the independence number of graphs that are connected and/or satisfy some odd girth condition. Our main result is the extension of a lower bound for the independence number of triangle-free graphs of maximum...... degree at most three due to Heckman and Thomas [Discrete Math 233 (2001), 233–237] to arbitrary triangle-free graphs. For connected triangle-free graphs of order n and size m, our result implies the existence of an independent set of order at least (4n−m−1) / 7.  ...

  15. On Independence for Capacities with Law of Large Numbers

    OpenAIRE

    Huang, Weihuan

    2017-01-01

    This paper introduces new notions of Fubini independence and Exponential independence of random variables under capacities to fit Ellsberg's model, and finds out the relationships between Fubini independence, Exponential independence, MacCheroni and Marinacci's independence and Peng's independence. As an application, we give a weak law of large numbers for capacities under Exponential independence.

  16. Independent peer review of nuclear safety computer codes

    International Nuclear Information System (INIS)

    Boyack, B.E.; Jenks, R.P.

    1993-01-01

    A structured, independent computer code peer-review process has been developed to assist the US Nuclear Regulatory Commission (NRC) and the US Department of Energy in their nuclear safety missions. This paper describes a structured process of independent code peer review, benefits associated with a code-independent peer review, as well as the authors' recent peer-review experience. The NRC adheres to the principle that safety of plant design, construction, and operation are the responsibility of the licensee. Nevertheless, NRC staff must have the ability to independently assess plant designs and safety analyses submitted by license applicants. According to Ref. 1, open-quotes this requires that a sound understanding be obtained of the important physical phenomena that may occur during transients in operating power plants.close quotes The NRC concluded that computer codes are the principal products to open-quotes understand and predict plant response to deviations from normal operating conditionsclose quotes and has developed several codes for that purpose. However, codes cannot be used blindly; they must be assessed and found adequate for the purposes they are intended. A key part of the qualification process can be accomplished through code peer reviews; this approach has been adopted by the NRC

  17. Multi-spectrometer calibration transfer based on independent component analysis.

    Science.gov (United States)

    Liu, Yan; Xu, Hao; Xia, Zhenzhen; Gong, Zhiyong

    2018-02-26

    Calibration transfer is indispensable for practical applications of near infrared (NIR) spectroscopy due to the need for precise and consistent measurements across different spectrometers. In this work, a method for multi-spectrometer calibration transfer is described based on independent component analysis (ICA). A spectral matrix is first obtained by aligning the spectra measured on different spectrometers. Then, by using independent component analysis, the aligned spectral matrix is decomposed into the mixing matrix and the independent components of different spectrometers. These differing measurements between spectrometers can then be standardized by correcting the coefficients within the independent components. Two NIR datasets of corn and edible oil samples measured with three and four spectrometers, respectively, were used to test the reliability of this method. The results of both datasets reveal that spectra measurements across different spectrometers can be transferred simultaneously and that the partial least squares (PLS) models built with the measurements on one spectrometer can predict that the spectra can be transferred correctly on another.

  18. A CMOS image sensor with row and column profiling means

    NARCIS (Netherlands)

    Xie, N.; Theuwissen, A.J.P.; Wang, X.; Leijtens, J.A.P.; Hakkesteegt, H.; Jansen, H.

    2008-01-01

    This paper describes the implementation and firstmeasurement results of a new way that obtains row and column profile data from a CMOS Image Sensor, which is developed for a micro-Digital Sun Sensor (μDSS).The basic profiling action is achieved by the pixels with p-type MOS transistors which realize

  19. Thermospheric neutral wind profile in moonlit midnight by Lithium release experiments in Japan

    Science.gov (United States)

    Yamamoto, M. Y.; Watanabe, S.; Abe, T.; Kakinami, Y.; Habu, H.; Yamamoto, M.

    2015-12-01

    Neutral wind profiles were observed in lower thermosphere at about between 90 km and 130 km altitude by using resonance scattering light of moonlit Lithium (Li) vapor released from sounding rockets in midnight (with almost full-moon condition) in 2013 in Japan. As a target of the Daytime Dynamo campaign, Li release experiment was operated at Wallops Flight Facility (WFF) of NASA, U.S.A. in July, 2013 (Pfaff et al., 2015, this meeting), while the same kind of rocket-ground observation campaign in midnight was carried out by using S-520-27/S-310-42 sounding rockets in Uchinoura Space Center (USC) of JAXA, Kagoshima, Japan, also in July 2013.Since imaging signal-to-noise (S/N) condition of the experiment was so severe, we conducted to apply airborne observation for imaging the faint moonlit Li tracers so as to reduce the illuminating intensity of the background skies as an order of magnitude. Two independent methods for calculating the wind profile were applied to the Lithium emission image sequences successfully obtained by the airborne imaging by special Li imagers aboard the airplanes in order to derive precise information of Li tracers motion under the condition of single observation site on a moving aircraft along its flight path at about 12 km altitude in lower stratosphere. Slight attitude-feedback motion of the aircraft's 3-axes attitude changes (rolling, yawing and pitching) was considered for obtaining precise coordinates on each snapshot. Another approach is giving a simple mathematic function for wind profile to resolve the shape displacement of the imaged Li tracers. As a result, a wind profile in moonlit thermosphere was calculated in a range up to about 150 m/s with some fluctuated parts possibly disturbed by wind shears. In the same experiment, another sounding rocket S-310-42 with a TMA canister was also launched from USC/JAXA at about 1 hour before the rocket with carrying the Lithium canisters, thus, we can derive the other 2 profiles determined by

  20. Association of cardiometabolic risk profile with prehypertension accompany hyperhomocysteinaemia.

    Science.gov (United States)

    Chen, Huili; Sun, Yuemin; Wang, Xuechun; Si, Quan; Yao, Wei; Wan, Zheng

    2015-01-01

    Study suggested that elevated homocysteine showed a multiplicative effect on cardiovascular diseases in hypertensive subjects. It was reported that elevated homocysteine level was independently associated with increased arterial stiffness in prehypertensives. It remains unclear whether prehypertensives combined with elevated homocysteine have adverse cardiovascular risk factors. We aimed to compare cardiometabolic risk profile between prehypertensives with hyperhomocysteinaemia and those without either condition. Plasma total homocysteine and risk profile were determined among 874 Chinese non-hypertension individuals in Tianjin. They were subdivided into four groups: prehypertension with hyperhomocysteinaemia (≥10 μmol/L), prehypertension with normal homocysteine (risk profile. Strict lipid management and weigh control may be needed in prehypertensives with elevated homocysteine.

  1. The prediction of BRDFs from surface profile measurements

    International Nuclear Information System (INIS)

    Church, E.L.; Takacs, P.Z.; Leonard, T.A.

    1989-01-01

    This paper discusses methods of predicting the BRDF of smooth surfaces from profile measurements of their surface finish. The conversion of optical profile data to the BRDF at the same wavelength is essentially independent of scattering models, while the conversion of mechanical measurements, and wavelength scaling in general, are model dependent. Procedures are illustrated for several surfaces, including two from the recent HeNe BRDF round robin, and results are compared with measured data. Reasonable agreement is found except for surfaces which involve significant scattering from isolated surface defects which are poorly sampled in the profile data

  2. Analysis shear wave velocity structure obtained from surface wave methods in Bornova, Izmir

    Energy Technology Data Exchange (ETDEWEB)

    Pamuk, Eren, E-mail: eren.pamuk@deu.edu.tr; Akgün, Mustafa, E-mail: mustafa.akgun@deu.edu.tr [Department of Geophysical Engineering, Dokuz Eylul University, Izmir (Turkey); Özdağ, Özkan Cevdet, E-mail: cevdet.ozdag@deu.edu.tr [Dokuz Eylul University Rectorate, Izmir (Turkey)

    2016-04-18

    Properties of the soil from the bedrock is necessary to describe accurately and reliably for the reduction of earthquake damage. Because seismic waves change their amplitude and frequency content owing to acoustic impedance difference between soil and bedrock. Firstly, shear wave velocity and depth information of layers on bedrock is needed to detect this changing. Shear wave velocity can be obtained using inversion of Rayleigh wave dispersion curves obtained from surface wave methods (MASW- the Multichannel Analysis of Surface Waves, ReMi-Refraction Microtremor, SPAC-Spatial Autocorrelation). While research depth is limeted in active source study, a passive source methods are utilized for deep depth which is not reached using active source methods. ReMi method is used to determine layer thickness and velocity up to 100 m using seismic refraction measurement systems.The research carried out up to desired depth depending on radius using SPAC which is utilized easily in conditions that district using of seismic studies in the city. Vs profiles which are required to calculate deformations in under static and dynamic loads can be obtained with high resolution using combining rayleigh wave dispersion curve obtained from active and passive source methods. In the this study, Surface waves data were collected using the measurements of MASW, ReMi and SPAC at the İzmir Bornova region. Dispersion curves obtained from surface wave methods were combined in wide frequency band and Vs-depth profiles were obtained using inversion. Reliability of the resulting soil profiles were provided by comparison with theoretical transfer function obtained from soil paremeters and observed soil transfer function from Nakamura technique and by examination of fitting between these functions. Vs values are changed between 200-830 m/s and engineering bedrock (Vs>760 m/s) depth is approximately 150 m.

  3. Domain-independent information extraction in unstructured text

    Energy Technology Data Exchange (ETDEWEB)

    Irwin, N.H. [Sandia National Labs., Albuquerque, NM (United States). Software Surety Dept.

    1996-09-01

    Extracting information from unstructured text has become an important research area in recent years due to the large amount of text now electronically available. This status report describes the findings and work done during the second year of a two-year Laboratory Directed Research and Development Project. Building on the first-year`s work of identifying important entities, this report details techniques used to group words into semantic categories and to output templates containing selective document content. Using word profiles and category clustering derived during a training run, the time-consuming knowledge-building task can be avoided. Though the output still lacks in completeness when compared to systems with domain-specific knowledge bases, the results do look promising. The two approaches are compatible and could complement each other within the same system. Domain-independent approaches retain appeal as a system that adapts and learns will soon outpace a system with any amount of a priori knowledge.

  4. Culture-Independent Molecular Tools for Soil and Rhizosphere Microbiology

    Directory of Open Access Journals (Sweden)

    Peer M. Schenk

    2013-08-01

    Full Text Available Soil microbial communities play an important role in plant health and soil quality. Researchers have developed a wide range of methods for studying the structure, diversity, and activity of microbes to better understand soil biology and plant-microbe interactions. Functional microbiological analyses of the rhizosphere have given new insights into the role of microbial communities in plant nutrition and plant protection against diseases. In this review, we present the most commonly used traditional as well as new culture-independent molecular methods to assess the diversity and function of soil microbial communities. Furthermore, we discuss advantages and disadvantages of these techniques and provide a perspective on emerging technologies for soil microbial community profiling.

  5. Massively Parallel Dimension Independent Adaptive Metropolis

    KAUST Repository

    Chen, Yuxin

    2015-01-01

    parameter dimension, by respecting the variance, for Gaussian targets. The result- ing algorithm, referred to as the dimension-independent adaptive Metropolis (DIAM) algorithm, also shows improved performance with respect to adaptive Metropolis on non

  6. Materialism, status consumption, and consumer independence.

    Science.gov (United States)

    Goldsmith, Ronald Earl; Clark, Ronald A

    2012-01-01

    Materialism influences many people. We focus on two aspects of this influence: reactions to prestige products and to the influence of others. A study of 187 U.S. student consumers shows that materialism is positively related to buying products that confer status. In contrast, materialism is negatively related to consumer independence, an enduring tendency to pay minimal attention to the prescribed norms of other consumers and to make product and brand decisions according to personal preferences. Consuming products for status is also negatively related to consumer independence. Moreover, the association between materialism and consumer independence is completely mediated by consuming for status. Materialism urges consumers to be status conscious so that they follow social norms in purchasing, but seeking status through goods is avoided by less materialistic, independent consumers. A second study (n = 258) also using student consumers confirmed these results.

  7. Quantum background independence in string theory

    International Nuclear Information System (INIS)

    Witten, E.

    1994-01-01

    Not only in physical string theories, but also in some highly simplified situations, background independence has been difficult to understand. It is argued that the ''holomorphic anomaly'' of Bershadsky, Cecotti, Ooguri and Vafa gives a fundamental explanation of some of the problems. Moreover, their anomaly equation can be interpreted in terms of a rather peculiar quantum version of background independence: in systems afflicted by the anomaly, background independence does not hold order by order in perturbation theory, but the exact partition function as a function of the coupling constants has a background independent interpretation as a state in an auxiliary quantum Hilbert space. The significance of this auxiliary space is otherwise unknown. (author). 23 refs

  8. Monitoring Progress toward Independent Silent Reading.

    Science.gov (United States)

    Franc, Lillian H.; Hildebrandt, Jeannette

    1984-01-01

    Concludes, among other things, that fluent oral reading is an important step toward reading for meaning and independent silent reading and that silent reading should be encouraged from the beginning of reading instruction. (FL)

  9. Update on the independent radiation monitor (IRM)

    International Nuclear Information System (INIS)

    Kroening, P.M.; Mucha, R.

    1976-01-01

    The new independent radiation monitor (IRM), unlike its predecessor, is a reliable and sensitive safety device for any radiation therapy room. It shows unequivocally that the beam is on, and it is inexpensive and simple to construct

  10. Quantum cryptography: The power of independence

    Science.gov (United States)

    Ekert, Artur

    2018-02-01

    Device-independent quantum cryptography promises unprecedented security, but it is regarded as a theorist's dream and an experimentalist's nightmare. A new mathematical tool has now pushed its experimental demonstration much closer to reality.

  11. What is Happening with Independent System Operators?

    Energy Technology Data Exchange (ETDEWEB)

    Porter, K. L.

    1999-02-01

    Emerging independent system operators (ISOs) appear to have many advantages for the wind power industry. This paper compares some past research on wind and transmission issues with some of the developments in ISO design and implementation.

  12. Kernel-based tests for joint independence

    DEFF Research Database (Denmark)

    Pfister, Niklas; Bühlmann, Peter; Schölkopf, Bernhard

    2018-01-01

    if the $d$ variables are jointly independent, as long as the kernel is characteristic. Based on an empirical estimate of dHSIC, we define three different non-parametric hypothesis tests: a permutation test, a bootstrap test and a test based on a Gamma approximation. We prove that the permutation test......We investigate the problem of testing whether $d$ random variables, which may or may not be continuous, are jointly (or mutually) independent. Our method builds on ideas of the two variable Hilbert-Schmidt independence criterion (HSIC) but allows for an arbitrary number of variables. We embed...... the $d$-dimensional joint distribution and the product of the marginals into a reproducing kernel Hilbert space and define the $d$-variable Hilbert-Schmidt independence criterion (dHSIC) as the squared distance between the embeddings. In the population case, the value of dHSIC is zero if and only...

  13. Opening A New Independent Pharmacy 101

    Directory of Open Access Journals (Sweden)

    Azam Elabed

    2016-02-01

    Full Text Available Opening an independent pharmacy is a process that involves multiple components. The rationale of this project is to discuss different issues that must be investigated prior to opening a new independency pharmacy. This includes the location, structure of the corporation, start-up cost, picking a wholesaler, fulfilling state board requirements and Philadelphia requirements, having a valid license, making professional relationships, and knowing basic marketing research. Methods used include using the knowledge and expertise from an independent pharmacy owner, visiting pharmacies, and interviewing neighbors for basic marketing research. Many aspects of opening an independent pharmacy differ significantly from a retail pharmacy, as there are various issues within the pharmacy and outside the pharmacy that must be extensively researched prior to opening in order to be successful.   Type: Student Project

  14. NMFS Fishery-Independent Survey System (FINSS)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Fishery Independent Survey System (FINSS) is a national system that characterizes NMFS ocean observation activities, stock and ecosystem data collections during...

  15. Qualification of organizations for independent technical supervision

    International Nuclear Information System (INIS)

    1981-04-01

    The requirements are established on trial for the qualification of an organization as an independent technical supervision organization in nuclear facilities, in activities related with quality assurance programs. (I.C.R.) [pt

  16. In vivo measurement of urethral dose profiles

    International Nuclear Information System (INIS)

    Toye, W.C.; Royal Melbourne Institute of Technology,; Duchesne, G.M.; Das, K.R.; Cee, A.; Mameghan, H.; Johnston, P.N.

    2001-01-01

    definition and translation variation, or gland edema) are not introduced as the TLD train must lay in the centre of the urethra. Typically, agreement between measured and predicted (localised by the position of brass spacers) urethral doses was ± 3%. On one occasion, after review of the measured profile, a treatment plan was subsequently altered for the remaining 3 treatment fractions. The urethral cavity provided an ideal location from which TLD in vivo measurements were made during HDR brachytherapy to the prostate. A method for obtaining a database of measured urethral dose profiles using routine in vivo TLD dosimetry is described. The in vivo measurements were in good agreement with profiles predicted by the dose planning algorithm. Copyright (2001) Australasian College of Physical Scientists and Engineers in Medicine

  17. Alternative Perspectives on Independence of Directors

    OpenAIRE

    Brennan, Niamh; McDermott, Michael

    2004-01-01

    This paper examines the issue of independence of boards of directors and non-executive directors of companies listed on the Irish Stock Exchange. Based on information published in annual reports, the study found that most Irish listed companies were complying with the Combined Code’s recommendations for a balanced board structure, albeit with only 60 per cent having majority-independent boards. The study found a lack of consistency in interpreting the definition of “independence”, a lack of d...

  18. Salicylic acid-independent plant defence pathways

    OpenAIRE

    Pieterse, C.M.J.; Loon, L.C. van

    1999-01-01

    Salicylic acid is an important signalling molecule involved in both locally and systemically induced disease resistance responses. Recent advances in our understanding of plant defence signalling have revealed that plants employ a network of signal transduction pathways, some of which are independent of salicylic acid. Evidence is emerging that jasmonic acid and ethylene play key roles in these salicylic acid-independent pathways. Cross-talk between the salicylic acid-dependent and the salicy...

  19. Path dependence and independent utility regulation

    DEFF Research Database (Denmark)

    Ibsen, Christian Lyhne; Skovgaard Poulsen, Lauge

    2007-01-01

    The establishment of the Danish independent regulatory authorities for the energy and telecommunications sectors was based upon EU directives as part of their liberalisation process. Following the concepts of transaction costs and path dependency this article analyses differences in independence...... between the two authorities - the Danish Energy Regulatory Authority (Energitilsynet) and the National IT and Telecommunications Agency (IT- og Telestyrelsen) respectively. We find that the state's negligible interest in the energy sector until the 1970s formed the basis for strong energy companies...

  20. Efficient algorithms for conditional independence inference

    Czech Academy of Sciences Publication Activity Database

    Bouckaert, R.; Hemmecke, R.; Lindner, S.; Studený, Milan

    2010-01-01

    Roč. 11, č. 1 (2010), s. 3453-3479 ISSN 1532-4435 R&D Projects: GA ČR GA201/08/0539; GA MŠk 1M0572 Institutional research plan: CEZ:AV0Z10750506 Keywords : conditional independence inference * linear programming approach Subject RIV: BA - General Mathematics Impact factor: 2.949, year: 2010 http://library.utia.cas.cz/separaty/2010/MTR/studeny-efficient algorithms for conditional independence inference.pdf

  1. A generalized notion of semantic independence

    DEFF Research Database (Denmark)

    Fränzle, Martin; Stengel, Bernhard von; Wittmüss, Arne

    1995-01-01

    For programs represented semantically as relations, a concept of semantic independence is defined that is more general than previously stated notions. It allows for shared input variables and irrelevant interference due to nondeterminism.......For programs represented semantically as relations, a concept of semantic independence is defined that is more general than previously stated notions. It allows for shared input variables and irrelevant interference due to nondeterminism....

  2. THE LUMINOSITY PROFILES OF BRIGHTEST CLUSTER GALAXIES

    International Nuclear Information System (INIS)

    Donzelli, C. J.; Muriel, H.; Madrid, J. P.

    2011-01-01

    We have derived detailed R-band luminosity profiles and structural parameters for a total of 430 brightest cluster galaxies (BCGs), down to a limiting surface brightness of 24.5 mag arcsec -2 . Light profiles were initially fitted with a Sersic's R 1/n model, but we found that 205 (∼48%) BCGs require a double component model to accurately match their light profiles. The best fit for these 205 galaxies is an inner Sersic model, with indices n ∼ 1-7, plus an outer exponential component. Thus, we establish the existence of two categories of the BCG luminosity profiles: single and double component profiles. We found that double profile BCGs are brighter (∼0.2 mag) than single profile BCGs. In fact, the Kolmogorov-Smirnov test applied to these subsamples indicates that they have different total magnitude distributions, with mean values M R = -23.8 ± 0.6 mag for single profile BCGs and M R = -24.0 ± 0.5 mag for double profile BCGs. We find that partial luminosities for both subsamples are indistinguishable up to r = 15 kpc, while for r > 20 kpc the luminosities we obtain are on average 0.2 mag brighter for double profile BCGs. This result indicates that extra-light for double profile BCGs does not come from the inner region but from the outer regions of these galaxies. The best-fit slope of the Kormendy relation for the whole sample is a = 3.13 ± 0.04. However, when fitted separately, single and double profile BCGs show different slopes: a single = 3.29 ± 0.06 and a double = 2.79 ± 0.08. Also, the logarithmic slope of the metric luminosity α is higher in double profile BCGs (α double = 0.65 ± 0.12) than in single profile BCGs (α single = 0.59 ± 0.14). The mean isophote outer ellipticity (calculated at μ ∼ 24 mag arcsec -2 ) is higher in double profile BCGs (e double = 0.30 ± 0.10) than in single profile BCGs (e single = 0.26 ± 0.11). Similarly, the mean absolute value of inner minus outer ellipticity is also higher in double profile BCGs. From a

  3. Water Column Profile Data

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Southeast Fisheries Science Center Mississippi Laboratories conducts standardized fisheries independent resource surveys in the Gulf of Mexico, South Atlantic,...

  4. Institutional profile questionnaire

    International Development Research Centre (IDRC) Digital Library (Canada)

    test

    Public (i.e., independent govt. body, corporate owned by govt., etc.) N.B. If you ... If yes, services threshold amount? ... How long is the procurement process? : ... Information on person authorized to sign financial reports on behalf of institution.

  5. On the k-independence required by linear probing and minwise independence

    DEFF Research Database (Denmark)

    Pǎtraşcu, Mihai; Thorup, Mikkel

    2016-01-01

    We show that linear probing requires 5-independent hash functions for expected constant-time performance, matching an upper bound of Pagh et al. [2009]. More precisely, we construct a random 4-independent hash function yielding expected logarithmic search time for certain keys. For (1 + ε......)-approximate minwise independence, we show that Ω(lg1 ε)-independent hash functions are required, matching an upper bound of Indyk [2001]. We also show that the very fast 2-independent multiply-shift scheme of Dietzfelbinger [1996] fails badly in both applications....

  6. The lensing properties of the Einasto profile

    OpenAIRE

    Retana-Montenegro, E.; Frutos-Alfaro, F.

    2011-01-01

    In recent high resolution N-body CDM simulations, it has been had found that nonsingular three-parameter models, e.g. the Einasto profile has a better performance better than the singular two-parameter models, e.g. the Navarro, Frenk and White in the fitting of a wide range of dark matter halos. A problem with this profile is that the surface mass density is non-analytical for general values of the Einasto index. Therefore, its other lensing properties have the same problem. We obtain an exac...

  7. Convolution based profile fitting

    International Nuclear Information System (INIS)

    Kern, A.; Coelho, A.A.; Cheary, R.W.

    2002-01-01

    Full text: In convolution based profile fitting, profiles are generated by convoluting functions together to form the observed profile shape. For a convolution of 'n' functions this process can be written as, Y(2θ)=F 1 (2θ)x F 2 (2θ)x... x F i (2θ)x....xF n (2θ). In powder diffractometry the functions F i (2θ) can be interpreted as the aberration functions of the diffractometer, but in general any combination of appropriate functions for F i (2θ) may be used in this context. Most direct convolution fitting methods are restricted to combinations of F i (2θ) that can be convoluted analytically (e.g. GSAS) such as Lorentzians, Gaussians, the hat (impulse) function and the exponential function. However, software such as TOPAS is now available that can accurately convolute and refine a wide variety of profile shapes numerically, including user defined profiles, without the need to convolute analytically. Some of the most important advantages of modern convolution based profile fitting are: 1) virtually any peak shape and angle dependence can normally be described using minimal profile parameters in laboratory and synchrotron X-ray data as well as in CW and TOF neutron data. This is possible because numerical convolution and numerical differentiation is used within the refinement procedure so that a wide range of functions can easily be incorporated into the convolution equation; 2) it can use physically based diffractometer models by convoluting the instrument aberration functions. This can be done for most laboratory based X-ray powder diffractometer configurations including conventional divergent beam instruments, parallel beam instruments, and diffractometers used for asymmetric diffraction. It can also accommodate various optical elements (e.g. multilayers and monochromators) and detector systems (e.g. point and position sensitive detectors) and has already been applied to neutron powder diffraction systems (e.g. ANSTO) as well as synchrotron based

  8. Model-independent confirmation of the $Z(4430)^-$ state

    CERN Document Server

    Aaij, Roel; Adinolfi, Marco; Affolder, Anthony; Ajaltouni, Ziad; Albrecht, Johannes; Alessio, Federico; Alexander, Michael; Ali, Suvayu; Alkhazov, Georgy; Alvarez Cartelle, Paula; Alves Jr, Antonio; Amato, Sandra; Amerio, Silvia; Amhis, Yasmine; An, Liupan; Anderlini, Lucio; Anderson, Jonathan; Andreassen, Rolf; Andreotti, Mirco; Andrews, Jason; Appleby, Robert; Aquines Gutierrez, Osvaldo; Archilli, Flavio; Artamonov, Alexander; Artuso, Marina; Aslanides, Elie; Auriemma, Giulio; Baalouch, Marouen; Bachmann, Sebastian; Back, John; Badalov, Alexey; Balagura, Vladislav; Baldini, Wander; Barlow, Roger; Barschel, Colin; Barsuk, Sergey; Barter, William; Batozskaya, Varvara; Bauer, Thomas; Bay, Aurelio; Beaucourt, Leo; Beddow, John; Bedeschi, Franco; Bediaga, Ignacio; Belogurov, Sergey; Belous, Konstantin; Belyaev, Ivan; Ben-Haim, Eli; Bencivenni, Giovanni; Benson, Sean; Benton, Jack; Berezhnoy, Alexander; Bernet, Roland; Bettler, Marc-Olivier; van Beuzekom, Martinus; Bien, Alexander; Bifani, Simone; Bird, Thomas; Bizzeti, Andrea; Bjørnstad, Pål Marius; Blake, Thomas; Blanc, Frédéric; Blouw, Johan; Blusk, Steven; Bocci, Valerio; Bondar, Alexander; Bondar, Nikolay; Bonivento, Walter; Borghi, Silvia; Borgia, Alessandra; Borsato, Martino; Bowcock, Themistocles; Bowen, Espen Eie; Bozzi, Concezio; Brambach, Tobias; van den Brand, Johannes; Bressieux, Joël; Brett, David; Britsch, Markward; Britton, Thomas; Brodzicka, Jolanta; Brook, Nicholas; Brown, Henry; Bursche, Albert; Busetto, Giovanni; Buytaert, Jan; Cadeddu, Sandro; Calabrese, Roberto; Calvi, Marta; Calvo Gomez, Miriam; Camboni, Alessandro; Campana, Pierluigi; Campora Perez, Daniel; Carbone, Angelo; Carboni, Giovanni; Cardinale, Roberta; Cardini, Alessandro; Carranza-Mejia, Hector; Carson, Laurence; Carvalho Akiba, Kazuyoshi; Casse, Gianluigi; Cassina, Lorenzo; Castillo Garcia, Lucia; Cattaneo, Marco; Cauet, Christophe; Cenci, Riccardo; Charles, Matthew; Charpentier, Philippe; Chen, Shanzhen; Cheung, Shu-Faye; Chiapolini, Nicola; Chrzaszcz, Marcin; Ciba, Krzystof; Cid Vidal, Xabier; Ciezarek, Gregory; Clarke, Peter; Clemencic, Marco; Cliff, Harry; Closier, Joel; Coco, Victor; Cogan, Julien; Cogneras, Eric; Collins, Paula; Comerma-Montells, Albert; Contu, Andrea; Cook, Andrew; Coombes, Matthew; Coquereau, Samuel; Corti, Gloria; Corvo, Marco; Counts, Ian; Couturier, Benjamin; Cowan, Greig; Craik, Daniel Charles; Cruz Torres, Melissa Maria; Cunliffe, Samuel; Currie, Robert; D'Ambrosio, Carmelo; Dalseno, Jeremy; David, Pascal; David, Pieter; Davis, Adam; De Bruyn, Kristof; De Capua, Stefano; De Cian, Michel; De Miranda, Jussara; De Paula, Leandro; De Silva, Weeraddana; De Simone, Patrizia; Decamp, Daniel; Deckenhoff, Mirko; Del Buono, Luigi; Déléage, Nicolas; Derkach, Denis; Deschamps, Olivier; Dettori, Francesco; Di Canto, Angelo; Dijkstra, Hans; Donleavy, Stephanie; Dordei, Francesca; Dorigo, Mirco; Dosil Suárez, Alvaro; Dossett, David; Dovbnya, Anatoliy; Dujany, Giulio; Dupertuis, Frederic; Durante, Paolo; Dzhelyadin, Rustem; Dziurda, Agnieszka; Dzyuba, Alexey; Easo, Sajan; Egede, Ulrik; Egorychev, Victor; Eidelman, Semen; Eisenhardt, Stephan; Eitschberger, Ulrich; Ekelhof, Robert; Eklund, Lars; El Rifai, Ibrahim; Elsasser, Christian; Ely, Scott; Esen, Sevda; Evans, Timothy; Falabella, Antonio; Färber, Christian; Farinelli, Chiara; Farley, Nathanael; Farry, Stephen; Ferguson, Dianne; Fernandez Albor, Victor; Ferreira Rodrigues, Fernando; Ferro-Luzzi, Massimiliano; Filippov, Sergey; Fiore, Marco; Fiorini, Massimiliano; Firlej, Miroslaw; Fitzpatrick, Conor; Fiutowski, Tomasz; Fontana, Marianna; Fontanelli, Flavio; Forty, Roger; Francisco, Oscar; Frank, Markus; Frei, Christoph; Frosini, Maddalena; Fu, Jinlin; Furfaro, Emiliano; Gallas Torreira, Abraham; Galli, Domenico; Gallorini, Stefano; Gambetta, Silvia; Gandelman, Miriam; Gandini, Paolo; Gao, Yuanning; Garofoli, Justin; Garra Tico, Jordi; Garrido, Lluis; Gaspar, Clara; Gauld, Rhorry; Gavardi, Laura; Gersabeck, Evelina; Gersabeck, Marco; Gershon, Timothy; Ghez, Philippe; Gianelle, Alessio; Giani', Sebastiana; Gibson, Valerie; Giubega, Lavinia-Helena; Gligorov, Vladimir; Göbel, Carla; Golubkov, Dmitry; Golutvin, Andrey; Gomes, Alvaro; Gordon, Hamish; Gotti, Claudio; Grabalosa Gándara, Marc; Graciani Diaz, Ricardo; Granado Cardoso, Luis Alberto; Graugés, Eugeni; Graziani, Giacomo; Grecu, Alexandru; Greening, Edward; Gregson, Sam; Griffith, Peter; Grillo, Lucia; Grünberg, Oliver; Gui, Bin; Gushchin, Evgeny; Guz, Yury; Gys, Thierry; Hadjivasiliou, Christos; Haefeli, Guido; Haen, Christophe; Haines, Susan; Hall, Samuel; Hamilton, Brian; Hampson, Thomas; Han, Xiaoxue; Hansmann-Menzemer, Stephanie; Harnew, Neville; Harnew, Samuel; Harrison, Jonathan; Hartmann, Thomas; He, Jibo; Head, Timothy; Heijne, Veerle; Hennessy, Karol; Henrard, Pierre; Henry, Louis; Hernando Morata, Jose Angel; van Herwijnen, Eric; Heß, Miriam; Hicheur, Adlène; Hill, Donal; Hoballah, Mostafa; Hombach, Christoph; Hulsbergen, Wouter; Hunt, Philip; Hussain, Nazim; Hutchcroft, David; Hynds, Daniel; Idzik, Marek; Ilten, Philip; Jacobsson, Richard; Jaeger, Andreas; Jalocha, Pawel; Jans, Eddy; Jaton, Pierre; Jawahery, Abolhassan; Jezabek, Marek; Jing, Fanfan; John, Malcolm; Johnson, Daniel; Jones, Christopher; Joram, Christian; Jost, Beat; Jurik, Nathan; Kaballo, Michael; Kandybei, Sergii; Kanso, Walaa; Karacson, Matthias; Karbach, Moritz; Kelsey, Matthew; Kenyon, Ian; Ketel, Tjeerd; Khanji, Basem; Khurewathanakul, Chitsanu; Klaver, Suzanne; Kochebina, Olga; Kolpin, Michael; Komarov, Ilya; Koopman, Rose; Koppenburg, Patrick; Korolev, Mikhail; Kozlinskiy, Alexandr; Kravchuk, Leonid; Kreplin, Katharina; Kreps, Michal; Krocker, Georg; Krokovny, Pavel; Kruse, Florian; Kucharczyk, Marcin; Kudryavtsev, Vasily; Kurek, Krzysztof; Kvaratskheliya, Tengiz; La Thi, Viet Nga; Lacarrere, Daniel; Lafferty, George; Lai, Adriano; Lambert, Dean; Lambert, Robert W; Lanciotti, Elisa; Lanfranchi, Gaia; Langenbruch, Christoph; Langhans, Benedikt; Latham, Thomas; Lazzeroni, Cristina; Le Gac, Renaud; van Leerdam, Jeroen; Lees, Jean-Pierre; Lefèvre, Regis; Leflat, Alexander; Lefrançois, Jacques; Leo, Sabato; Leroy, Olivier; Lesiak, Tadeusz; Leverington, Blake; Li, Yiming; Liles, Myfanwy; Lindner, Rolf; Linn, Christian; Lionetto, Federica; Liu, Bo; Liu, Guoming; Lohn, Stefan; Longstaff, Iain; Lopes, Jose; Lopez-March, Neus; Lowdon, Peter; Lu, Haiting; Lucchesi, Donatella; Luo, Haofei; Lupato, Anna; Luppi, Eleonora; Lupton, Oliver; Machefert, Frederic; Machikhiliyan, Irina V; Maciuc, Florin; Maev, Oleg; Malde, Sneha; Manca, Giulia; Mancinelli, Giampiero; Manzali, Matteo; Maratas, Jan; Marchand, Jean François; Marconi, Umberto; Marin Benito, Carla; Marino, Pietro; Märki, Raphael; Marks, Jörg; Martellotti, Giuseppe; Martens, Aurelien; Martín Sánchez, Alexandra; Martinelli, Maurizio; Martinez Santos, Diego; Martinez Vidal, Fernando; Martins Tostes, Danielle; Massafferri, André; Matev, Rosen; Mathe, Zoltan; Matteuzzi, Clara; Mazurov, Alexander; McCann, Michael; McCarthy, James; McNab, Andrew; McNulty, Ronan; McSkelly, Ben; Meadows, Brian; Meier, Frank; Meissner, Marco; Merk, Marcel; Milanes, Diego Alejandro; Minard, Marie-Noelle; Moggi, Niccolò; Molina Rodriguez, Josue; Monteil, Stephane; Moran, Dermot; Morandin, Mauro; Morawski, Piotr; Mordà, Alessandro; Morello, Michael Joseph; Moron, Jakub; Morris, Adam Benjamin; Mountain, Raymond; Muheim, Franz; Müller, Katharina; Muresan, Raluca; Mussini, Manuel; Muster, Bastien; Naik, Paras; Nakada, Tatsuya; Nandakumar, Raja; Nasteva, Irina; Needham, Matthew; Neri, Nicola; Neubert, Sebastian; Neufeld, Niko; Neuner, Max; Nguyen, Anh Duc; Nguyen, Thi-Dung; Nguyen-Mau, Chung; Nicol, Michelle; Niess, Valentin; Niet, Ramon; Nikitin, Nikolay; Nikodem, Thomas; Novoselov, Alexey; Oblakowska-Mucha, Agnieszka; Obraztsov, Vladimir; Oggero, Serena; Ogilvy, Stephen; Okhrimenko, Oleksandr; Oldeman, Rudolf; Onderwater, Gerco; Orlandea, Marius; Otalora Goicochea, Juan Martin; Owen, Patrick; Oyanguren, Maria Arantza; Pal, Bilas Kanti; Palano, Antimo; Palombo, Fernando; Palutan, Matteo; Panman, Jacob; Papanestis, Antonios; Pappagallo, Marco; Parkes, Christopher; Parkinson, Christopher John; Passaleva, Giovanni; Patel, Girish; Patel, Mitesh; Patrignani, Claudia; Pazos Alvarez, Antonio; Pearce, Alex; Pellegrino, Antonio; Pepe Altarelli, Monica; Perazzini, Stefano; Perez Trigo, Eliseo; Perret, Pascal; Perrin-Terrin, Mathieu; Pescatore, Luca; Pesen, Erhan; Petridis, Konstantin; Petrolini, Alessandro; Picatoste Olloqui, Eduardo; Pietrzyk, Boleslaw; Pilař, Tomas; Pinci, Davide; Pistone, Alessandro; Playfer, Stephen; Plo Casasus, Maximo; Polci, Francesco; Poluektov, Anton; Polycarpo, Erica; Popov, Alexander; Popov, Dmitry; Popovici, Bogdan; Potterat, Cédric; Powell, Andrew; Prisciandaro, Jessica; Pritchard, Adrian; Prouve, Claire; Pugatch, Valery; Puig Navarro, Albert; Punzi, Giovanni; Qian, Wenbin; Rachwal, Bartolomiej; Rademacker, Jonas; Rakotomiaramanana, Barinjaka; Rama, Matteo; Rangel, Murilo; Raniuk, Iurii; Rauschmayr, Nathalie; Raven, Gerhard; Reichert, Stefanie; Reid, Matthew; dos Reis, Alberto; Ricciardi, Stefania; Richards, Alexander; Rihl, Mariana; Rinnert, Kurt; Rives Molina, Vincente; Roa Romero, Diego; Robbe, Patrick; Rodrigues, Ana Barbara; Rodrigues, Eduardo; Rodriguez Perez, Pablo; Roiser, Stefan; Romanovsky, Vladimir; Romero Vidal, Antonio; Rotondo, Marcello; Rouvinet, Julien; Ruf, Thomas; Ruffini, Fabrizio; Ruiz, Hugo; Ruiz Valls, Pablo; Sabatino, Giovanni; Saborido Silva, Juan Jose; Sagidova, Naylya; Sail, Paul; Saitta, Biagio; Salustino Guimaraes, Valdir; Sanchez Mayordomo, Carlos; Sanmartin Sedes, Brais; Santacesaria, Roberta; Santamarina Rios, Cibran; Santovetti, Emanuele; Sapunov, Matvey; Sarti, Alessio; Satriano, Celestina; Satta, Alessia; Savrie, Mauro; Savrina, Darya; Schiller, Manuel; Schindler, Heinrich; Schlupp, Maximilian; Schmelling, Michael; Schmidt, Burkhard; Schneider, Olivier; Schopper, Andreas; Schune, Marie Helene; Schwemmer, Rainer; Sciascia, Barbara; Sciubba, Adalberto; Seco, Marcos; Semennikov, Alexander; Senderowska, Katarzyna; Sepp, Indrek; Serra, Nicola; Serrano, Justine; Sestini, Lorenzo; Seyfert, Paul; Shapkin, Mikhail; Shapoval, Illya; Shcheglov, Yury; Shears, Tara; Shekhtman, Lev; Shevchenko, Vladimir; Shires, Alexander; Silva Coutinho, Rafael; Simi, Gabriele; Sirendi, Marek; Skidmore, Nicola; Skwarnicki, Tomasz; Smith, Anthony; Smith, Edmund; Smith, Eluned; Smith, Jackson; Smith, Mark; Snoek, Hella; Sokoloff, Michael; Soler, Paul; Soomro, Fatima; Souza, Daniel; Souza De Paula, Bruno; Spaan, Bernhard; Sparkes, Ailsa; Spinella, Franco; Spradlin, Patrick; Stagni, Federico; Stahl, Sascha; Steinkamp, Olaf; Stenyakin, Oleg; Stevenson, Scott; Stoica, Sabin; Stone, Sheldon; Storaci, Barbara; Stracka, Simone; Straticiuc, Mihai; Straumann, Ulrich; Stroili, Roberto; Subbiah, Vijay Kartik; Sun, Liang; Sutcliffe, William; Swientek, Krzysztof; Swientek, Stefan; Syropoulos, Vasileios; Szczekowski, Marek; Szczypka, Paul; Szilard, Daniela; Szumlak, Tomasz; T'Jampens, Stephane; Teklishyn, Maksym; Tellarini, Giulia; Teubert, Frederic; Thomas, Christopher; Thomas, Eric; van Tilburg, Jeroen; Tisserand, Vincent; Tobin, Mark; Tolk, Siim; Tomassetti, Luca; Tonelli, Diego; Topp-Joergensen, Stig; Torr, Nicholas; Tournefier, Edwige; Tourneur, Stephane; Tran, Minh Tâm; Tresch, Marco; Tsaregorodtsev, Andrei; Tsopelas, Panagiotis; Tuning, Niels; Ubeda Garcia, Mario; Ukleja, Artur; Ustyuzhanin, Andrey; Uwer, Ulrich; Vagnoni, Vincenzo; Valenti, Giovanni; Vallier, Alexis; Vazquez Gomez, Ricardo; Vazquez Regueiro, Pablo; Vázquez Sierra, Carlos; Vecchi, Stefania; Velthuis, Jaap; Veltri, Michele; Veneziano, Giovanni; Vesterinen, Mika; Viaud, Benoit; Vieira, Daniel; Vieites Diaz, Maria; Vilasis-Cardona, Xavier; Vollhardt, Achim; Volyanskyy, Dmytro; Voong, David; Vorobyev, Alexey; Vorobyev, Vitaly; Voß, Christian; Voss, Helge; de Vries, Jacco; Waldi, Roland; Wallace, Charlotte; Wallace, Ronan; Walsh, John; Wandernoth, Sebastian; Wang, Jianchun; Ward, David; Watson, Nigel; Websdale, David; Whitehead, Mark; Wicht, Jean; Wiedner, Dirk; Wilkinson, Guy; Williams, Matthew; Williams, Mike; Wilson, Fergus; Wimberley, Jack; Wishahi, Julian; Wislicki, Wojciech; Witek, Mariusz; Wormser, Guy; Wotton, Stephen; Wright, Simon; Wu, Suzhi; Wyllie, Kenneth; Xie, Yuehong; Xing, Zhou; Xu, Zhirui; Yang, Zhenwei; Yuan, Xuhao; Yushchenko, Oleg; Zangoli, Maria; Zavertyaev, Mikhail; Zhang, Feng; Zhang, Liming; Zhang, Wen Chao; Zhang, Yanxi; Zhelezov, Alexey; Zhokhov, Anatoly; Zhong, Liang; Zvyagin, Alexander

    2015-01-01

    The decay $B^0\\to \\psi(2S) K^+\\pi^-$ is analyzed using $\\rm 3~fb^{-1}$ of $pp$ collision data collected with the LHCb detector. A model-independent description of the $\\psi(2S) \\pi$ mass spectrum is obtained, using as input the $K\\pi$ mass spectrum and angular distribution derived directly from data, without requiring a theoretical description of resonance shapes or their interference. The hypothesis that the $\\psi(2S)\\pi$ mass spectrum can be described in terms of $K\\pi$ reflections alone is rejected with more than 8$\\sigma$ significance. This provides confirmation, in a model-independent way, of the need for an additional resonant component in the mass region of the $Z(4430)^-$ exotic state.

  9. Implementation of Bluetooth serial port based profiles in embedded systems

    Science.gov (United States)

    Liu, Guanglei; Qiu, Zhengding; Wang, Quanping; Gao, Qiang

    2001-10-01

    Bluetooth is a new short-range wireless communication technology developing rapidly in recent years. Bluetooth software architecture consists of stack and profiles. Serial Port Profile (SPP) is an underlying profile that emulates RS232 serial cable connections between two peer devices. Based on SPP, Dial-up Networking (DUN) Profile establishes PPP connection with remote dial-up server, Fax Profile realizes document facsimile function and LAN Access Profile (LAP) provides local area network access service. When it comes to their implementation in embedded systems, there are several challenges such as memory consumption, code efficiency, code reliability, and code portability onto different OS and hardware platforms to be attacked. In this paper, we propose integrated software architecture after discussing the great similarities shared among the three SPP based profiles. Then implementation of the architecture is given, in which OS-dependent and OS-independent parts are clearly separated. Profile interfaces with stack and OS are specified respectively so that the three profiles as a whole can be ported onto various software and hardware platforms easily. As a result, policy of transplanting our implementation onto different platforms is addressed at the end of the paper.

  10. Plasma Exosome Profiling of Cancer Patients by a Next Generation Systems Biology Approach.

    Science.gov (United States)

    Domenyuk, Valeriy; Zhong, Zhenyu; Stark, Adam; Xiao, Nianqing; O'Neill, Heather A; Wei, Xixi; Wang, Jie; Tinder, Teresa T; Tonapi, Sonal; Duncan, Janet; Hornung, Tassilo; Hunter, Andrew; Miglarese, Mark R; Schorr, Joachim; Halbert, David D; Quackenbush, John; Poste, George; Berry, Donald A; Mayer, Günter; Famulok, Michael; Spetzler, David

    2017-02-20

    Technologies capable of characterizing the full breadth of cellular systems need to be able to measure millions of proteins, isoforms, and complexes simultaneously. We describe an approach that fulfils this criterion: Adaptive Dynamic Artificial Poly-ligand Targeting (ADAPT). ADAPT employs an enriched library of single-stranded oligodeoxynucleotides (ssODNs) to profile complex biological samples, thus achieving an unprecedented coverage of system-wide, native biomolecules. We used ADAPT as a highly specific profiling tool that distinguishes women with or without breast cancer based on circulating exosomes in their blood. To develop ADAPT, we enriched a library of ~10 11 ssODNs for those associating with exosomes from breast cancer patients or controls. The resulting 10 6 enriched ssODNs were then profiled against plasma from independent groups of healthy and breast cancer-positive women. ssODN-mediated affinity purification and mass spectrometry identified low-abundance exosome-associated proteins and protein complexes, some with known significance in both normal homeostasis and disease. Sequencing of the recovered ssODNs provided quantitative measures that were used to build highly accurate multi-analyte signatures for patient classification. Probing plasma from 500 subjects with a smaller subset of 2000 resynthesized ssODNs stratified healthy, breast biopsy-negative, and -positive women. An AUC of 0.73 was obtained when comparing healthy donors with biopsy-positive patients.

  11. SIMULATION OF THE DISTILLATION BY PRESSURE REDUCTION TO OBTAIN ANHYDROUS ETHANOL

    Directory of Open Access Journals (Sweden)

    Yeney Lauzurique Guerra

    2016-10-01

    Full Text Available In this work the distillation by pressure reduction was evaluated through the HYSYS v3.2 process simulator. Due to the lack of data in the consulted bibliography to perform the simulation, the STATGRAPHICS Centurion XVI software was used to obtain a response surface that would define optimal operating conditions. The property package selected to work was based on the Margules model. An anhydrous ethanol molar composition of 0.9917 was obtained. Temperature profiles were analyzed as well as liquid and vapor molar flows and dehydration column composition profiles. The influence of operating parameters on the efficiency of simulated technology was determined by analyzing one case study. According to economic evaluation, the implementation of this technology is not economically profitable; taking into account current prices and costs mostly due to high energy consumption and construction costs of the tower. This result contributes to the pursuit of other profitable technologies from the economic point of view.

  12. DNA-based culture-independent analysis detects the presence of group a streptococcus in throat samples from healthy adults in Japan.

    Science.gov (United States)

    Kulkarni, Tejaswini; Aikawa, Chihiro; Nozawa, Takashi; Murase, Kazunori; Maruyama, Fumito; Nakagawa, Ichiro

    2016-10-11

    Group A Streptococcus (GAS; Streptococcus pyogenes) causes a range of mild to severe infections in humans. It can also colonize healthy persons asymptomatically. Therefore, it is important to study GAS carriage in healthy populations, as carriage of it might lead to subsequent disease manifestation, clonal spread in the community, and/or diversification of the organism. Throat swab culture is the gold standard method for GAS detection. Advanced culture-independent methods provide rapid and efficient detection of microorganisms directly from clinical samples. We investigated the presence of GAS in throat swab samples from healthy adults in Japan using culture-dependent and culture-independent methods. Two throat swab samples were collected from 148 healthy volunteers. One was cultured on selective medium, while total DNA extracted from the other was polymerase chain reaction (PCR) amplified with two GAS-specific primer pairs: one was a newly designed 16S rRNA-specific primer pair, the other a previously described V-Na + -ATPase primer pair. Although only 5 (3.4 %) of the 148 samples were GAS-positive by the culture-dependent method, 146 (98.6 %) were positive for the presence of GAS DNA by the culture-independent method. To obtain serotype information by emm typing, we performed nested PCR using newly designed emm primers. We detected the four different emm types in 25 (16.9 %) samples, and these differed from the common emm types associated with GAS associated diseases in Japan. The different emm types detected in the healthy volunteers indicate that the presence of unique emm types might be associated with GAS carriage. Our results suggest that culture-independent methods should be considered for profiling GAS in the healthy hosts, with a view to obtaining better understanding of these organisms. The GAS-specific primers (16S rRNA and V-Na + -ATPase) used in this study can be used to estimate the maximum potential GAS carriage in people.

  13. Country profile: Hungary

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    Country Profile: Hungary has been prepared as a background document for use by US Government agencies and US businesses interested in becoming involved with the new democracies of Eastern Europe as they pursue sustainable economic development. The focus of the Profile is on energy and highlights information on Hungary`s energy supply, demand, and utilization. It identifies patterns of energy usage in the important economic sectors, especially industry, and provides a preliminary assessment for opportunities to improve efficiencies in energy production, distribution and use by introducing more efficient technologies. The use of more efficient technologies would have the added benefit of reducing the environmental impact which, although is not the focus of the report, is an issue that effects energy choices. The Profile also presents considerable economic information, primarily in the context of how economic restructuring may affect energy supply, demand, and the introduction of more efficient technologies.

  14. Country profile: Hungary

    Energy Technology Data Exchange (ETDEWEB)

    1991-09-01

    Country Profile: Hungary has been prepared as a background document for use by US Government agencies and US businesses interested in becoming involved with the new democracies of Eastern Europe as they pursue sustainable economic development. The focus of the Profile is on energy and highlights information on Hungary's energy supply, demand, and utilization. It identifies patterns of energy usage in the important economic sectors, especially industry, and provides a preliminary assessment for opportunities to improve efficiencies in energy production, distribution and use by introducing more efficient technologies. The use of more efficient technologies would have the added benefit of reducing the environmental impact which, although is not the focus of the report, is an issue that effects energy choices. The Profile also presents considerable economic information, primarily in the context of how economic restructuring may affect energy supply, demand, and the introduction of more efficient technologies.

  15. Qualitative Value Profiling

    DEFF Research Database (Denmark)

    Duus, Henrik Johannsen; Bjerre, Mogens

    2015-01-01

    allows the development of 1) profiles of the target country in which operations are to take place, 2) profiles of the buying center (i.e. the group of decision makers) in the partner company, and 3) profiles of the product/service offering. It also allows the development of a semantic scaling method...... for deeper analysis of all involved factors. This paper presents the method and compares and contrasts it with other similar methods like the PESTELE method known from corporate strategy, the STEEPAL method known from scenario analysis, and the Politics-Institutions-Economy (PIE) framework known from...... International Business. This comparison suggests that QVP on most accounts provides deeper insights than alternative methods and thus lays the foundation for better strategic planning in international business-to-business markets. Hence, it is a valuable addition to the toolbox of business strategists...

  16. Detonation Wave Profile

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Laboratory

    2015-12-14

    The Zel’dovich-von Neumann-Doering (ZND) profile of a detonation wave is derived. Two basic assumptions are required: i. An equation of state (EOS) for a partly burned explosive; P(V, e, λ). ii. A burn rate for the reaction progress variable; d/dt λ = R(V, e, λ). For a steady planar detonation wave the reactive flow PDEs can be reduced to ODEs. The detonation wave profile can be determined from an ODE plus algebraic equations for points on the partly burned detonation loci with a specified wave speed. Furthermore, for the CJ detonation speed the end of the reaction zone is sonic. A solution to the reactive flow equations can be constructed with a rarefaction wave following the detonation wave profile. This corresponds to an underdriven detonation wave, and the rarefaction is know as a Taylor wave.

  17. Stroke Location Is an Independent Predictor of Cognitive Outcome.

    Science.gov (United States)

    Munsch, Fanny; Sagnier, Sharmila; Asselineau, Julien; Bigourdan, Antoine; Guttmann, Charles R; Debruxelles, Sabrina; Poli, Mathilde; Renou, Pauline; Perez, Paul; Dousset, Vincent; Sibon, Igor; Tourdias, Thomas

    2016-01-01

    On top of functional outcome, accurate prediction of cognitive outcome for stroke patients is an unmet need with major implications for clinical management. We investigated whether stroke location may contribute independent prognostic value to multifactorial predictive models of functional and cognitive outcomes. Four hundred twenty-eight consecutive patients with ischemic stroke were prospectively assessed with magnetic resonance imaging at 24 to 72 hours and at 3 months for functional outcome using the modified Rankin Scale and cognitive outcome using the Montreal Cognitive Assessment (MoCA). Statistical maps of functional and cognitive eloquent regions were derived from the first 215 patients (development sample) using voxel-based lesion-symptom mapping. We used multivariate logistic regression models to study the influence of stroke location (number of eloquent voxels from voxel-based lesion-symptom mapping maps), age, initial National Institutes of Health Stroke Scale and stroke volume on modified Rankin Scale and MoCA. The second part of our cohort was used as an independent replication sample. In univariate analyses, stroke location, age, initial National Institutes of Health Stroke Scale, and stroke volume were all predictive of poor modified Rankin Scale and MoCA. In multivariable analyses, stroke location remained the strongest independent predictor of MoCA and significantly improved the prediction compared with using only age, initial National Institutes of Health Stroke Scale, and stroke volume (area under the curve increased from 0.697-0.771; difference=0.073; 95% confidence interval, 0.008-0.155). In contrast, stroke location did not persist as independent predictor of modified Rankin Scale that was mainly driven by initial National Institutes of Health Stroke Scale (area under the curve going from 0.840 to 0.835). Similar results were obtained in the replication sample. Stroke location is an independent predictor of cognitive outcome (MoCA) at 3

  18. The Hopelessly Compromised: Independent Games as a Movement against Mainstream AAA Video Games

    DEFF Research Database (Denmark)

    Juul, Jesper

    2016-01-01

    The last 10-15 years have seen the rise of a loosely defined independent games movement, often promoted as a more authentic type of video game than mainstream big budget video games (Juul 2014). For example, developer Dan Cook claims that “Indie games let me be a fan who is cheering on someone...... of the design and values of mainstream video games. As such, mainstream video games play the role of the morally and aesthetically compromised other, an other from which video games must be saved; an other that independent games are assumed to be rebelling against. In this paper I will analyze independent games...... as a number of specific (and sometimes contradictory) rejections of particular aspects of mainstream video game design. I am examining the game design of selected high-profile independent games, as well as game reviews and developer statement about their games. Here I am presenting general results...

  19. Culture-independent discovery of natural products from soil metagenomes.

    Science.gov (United States)

    Katz, Micah; Hover, Bradley M; Brady, Sean F

    2016-03-01

    Bacterial natural products have proven to be invaluable starting points in the development of many currently used therapeutic agents. Unfortunately, traditional culture-based methods for natural product discovery have been deemphasized by pharmaceutical companies due in large part to high rediscovery rates. Culture-independent, or "metagenomic," methods, which rely on the heterologous expression of DNA extracted directly from environmental samples (eDNA), have the potential to provide access to metabolites encoded by a large fraction of the earth's microbial biosynthetic diversity. As soil is both ubiquitous and rich in bacterial diversity, it is an appealing starting point for culture-independent natural product discovery efforts. This review provides an overview of the history of soil metagenome-driven natural product discovery studies and elaborates on the recent development of new tools for sequence-based, high-throughput profiling of environmental samples used in discovering novel natural product biosynthetic gene clusters. We conclude with several examples of these new tools being employed to facilitate the recovery of novel secondary metabolite encoding gene clusters from soil metagenomes and the subsequent heterologous expression of these clusters to produce bioactive small molecules.

  20. Fetal Serum Metabolites Are Independently Associated with Gestational Diabetes Mellitus

    Directory of Open Access Journals (Sweden)

    Yong-Ping Lu

    2018-01-01

    Full Text Available Background/Aims: Gestational diabetes (GDM might be associated with alterations in the metabolomic profile of affected mothers and their offspring. Until now, there is a paucity of studies that investigated both, the maternal and the fetal serum metabolome in the setting of GDM. Mounting evidence suggests that the fetus is not just passively affected by gestational disease but might play an active role in it. Metabolomic studies performed in maternal blood and fetal cord blood could help to better discern distinct fetal from maternal disease interactions. Methods: At the time of birth, serum samples from mothers and newborns (cord blood samples were collected and screened for 163 metabolites utilizing tandem mass spectrometry. The cohort consisted of 412 mother/child pairs, including 31 cases of maternal GDM. Results: An initial non-adjusted analysis showed that eight metabolites in the maternal blood and 54 metabolites in the cord blood were associated with GDM. After Benjamini-Hochberg (BH procedure and adjustment for confounding factors for GDM, fetal phosphatidylcholine acyl-alkyl C 32: 1 and proline still showed an independent association with GDM. Conclusions: This study found metabolites in cord blood which were associated with GDM, even after adjustment for established risk factors of GDM. To the best of our knowledge, this is the first study demonstrating an independent association between fetal serum metabolites and maternal GDM. Our findings might suggest a potential effect of the fetal metabolome on maternal GDM.

  1. Comparison of TL profiles in recent sea cores

    Energy Technology Data Exchange (ETDEWEB)

    Castagnoli, G C; Bonino, G

    1985-01-01

    The thermoluminescence (TL) profile of different recent Tyrrhenian sea cores sampled at various intervals during the last centuries have been compared in order to check the reproducibility of the profiles and investigate the possibility of using the results for monitoring solar-terrestrial relations in the past. The satisfactory results obtained by comparison of two different cores in the time interval 1755-1969 A.D. has demonstrated: (a) the two TL profiles are correlated; (b) the 11 yr cycle corresponding to the main solar cycle is evident in both TL profiles.

  2. Photothermal depth profiling for multilayered Structures by particle swarm optimization

    International Nuclear Information System (INIS)

    Chen, Z J; Fang, J W; Zhang, S Y

    2011-01-01

    This paper presents a method to reconstruct thermal conductivity depth profile of a layered medium using noisy photothermal data. The method tries to obtain an accurate reconstruction of discontinuous profile using particle swarm optimization (PSO) algorithm and total variation (TV) regularization. The reconstructions of different thermal conductivity profiles have been tested on simulated photothermal data. The simulation results show that the method can find accurately the locations of discontinuities, and the reconstructed profiles are in agreement with the original ones. Moreover, the results also show the method has good robustness and anti-noise capability.

  3. Process for obtaining oxygen doped zinc telluride monocrystals and scintillator crystals obtained by this process

    International Nuclear Information System (INIS)

    Schneider, Maurice; Moreau, Roland; D'Haenen, J.-P.; Merenda, Pierre.

    1976-01-01

    A process is described for obtaining oxygen doped zinc telluride monocrystals, for use as scintillator crystals for ionising radiation detectors. The following operations are carried out in succession: one or several zinc telluride crystals are introduced into a silica ampoule together with a ternary mixture of zinc tellurium and oxygen, as an oxide or hydroxide of these elements; the ampoule is pumped down to a high vacuum and sealed; the sealed ampoule containing the mixture and monocrystals is placed in a kiln and brought to a uniform temperature sufficient to make the mixture three-phased, depending on its composition; the zinc telluride crystalline compound remains solid; the ampoule is then tempered to bring it quickly back to ambient temperature [fr

  4. Constructing Data Curation Profiles

    Directory of Open Access Journals (Sweden)

    Michael Witt

    2009-12-01

    Full Text Available This paper presents a brief literature review and then introduces the methods, design, and construction of the Data Curation Profile, an instrument that can be used to provide detailed information on particular data forms that might be curated by an academic library. These data forms are presented in the context of the related sub-disciplinary research area, and they provide the flow of the research process from which these data are generated. The profiles also represent the needs for data curation from the perspective of the data producers, using their own language. As such, they support the exploration of data curation across different research domains in real and practical terms. With the sponsorship of the Institute of Museum and Library Services, investigators from Purdue University and the University of Illinois interviewed 19 faculty subjects to identify needs for discovery, access, preservation, and reuse of their research data. For each subject, a profile was constructed that includes information about his or her general research, data forms and stages, value of data, data ingest, intellectual property, organization and description of data, tools, interoperability, impact and prestige, data management, and preservation. Each profile also presents a specific dataset supplied by the subject to serve as a concrete example. The Data Curation Profiles are being published to a public wiki for questions and discussion, and a blank template will be disseminated with guidelines for others to create and share their own profiles. This study was conducted primarily from the viewpoint of librarians interacting with faculty researchers; however, it is expected that these findings will complement a wide variety of data curation research and practice outside of librarianship and the university environment.

  5. Chapter Leadership Profiles among Citizen Activists in the Drunk Driving Movement.

    Science.gov (United States)

    Ungerleider, Steven; Bloch, Steven

    1987-01-01

    Study of Mothers Against Drunk Drivers (MADD) analyzed the chapter emphasis, levels of satisfaction and relationship to national office on several measures. Surveying 212 chapters, MADD leadership provided profile of independent, autonomous activists in the drunk driving countermeasure movement. (Author)

  6. Structure of organometallic compounds obtained by plasma of titanium isopropoxide

    International Nuclear Information System (INIS)

    Arreola R, M. L.

    2012-01-01

    This work presents a study on the synthesis and characterization of organometallic compounds of titanium oxide obtained from glow discharges of titanium tetraisopropoxide (TTIP) and water on glass and polyethylene. The objective is the synthesis of titanium oxide particles which can be fixed on different supports for use in further studies of contaminants degradation in effluent streams. The synthesis was carried out by plasma in a glass tubular reactor of 750 cm 3 and 15 cm length at 10 -1 mbar with power between 100 and 150 W during 2, 3 and 4 h. The precursors were TTIP and water vapor. TTIP is an organometallic compound composed of a central atom of Ti surrounded by 4 O atoms, which in turn are connected with chains of 3 C (propane s). The objective is the use of plasma collisions to separate the organic and inorganic phases of TTIP, so that both structure independently in a single material. The result was the formation of white titanium oxide powder composed with agglomerates of spherical particles with average diameter between 160 and 452 nm adhered to small films. The agglomerates have a tendency to change from film to particles with the energy applied to the synthesis. The study of the chemical structure showed a great presence of O 2 -Ti-O 2 (Ti surrounded by O) which can be found in most titanium oxides. Other chemical groups belonging to the organic phase were C=C=C, C=C=O and C 2 -C-Ch appearing from the dehydrogenation of TTIP, which can be a possible precursor of this reactions kind. The structural superficial analyses showed that the atomic composition varies according to type of substrate used. The greatest content of Ti was obtained on glass substrates. However, the synthesis conditions had not evident effect in the participation of chemical states found in the inorganic phase. The crystalline studies indicated that the material is amorphous, although the de convoluted X-ray spectra showed that the synthesized titanium oxides on glass tend to

  7. Equilibrium shoreface profiles

    DEFF Research Database (Denmark)

    Aagaard, Troels; Hughes, Michael G

    2017-01-01

    Large-scale coastal behaviour models use the shoreface profile of equilibrium as a fundamental morphological unit that is translated in space to simulate coastal response to, for example, sea level oscillations and variability in sediment supply. Despite a longstanding focus on the shoreface...... profile and its relevance to predicting coastal response to changing environmental conditions, the processes and dynamics involved in shoreface equilibrium are still not fully understood. Here, we apply a process-based empirical sediment transport model, combined with morphodynamic principles to provide......; there is no tuning or calibration and computation times are short. It is therefore easily implemented with repeated iterations to manage uncertainty....

  8. Evaluation of cross-linked chitosan microparticles containing acyclovir obtained by spray-drying

    International Nuclear Information System (INIS)

    Stulzer, Hellen Karine; Tagliari, Monika Piazzon; Parize, Alexandre Luis; Silva, Marcos Antonio Segatto; Laranjeira, Mauro Cesar Marghetti

    2009-01-01

    The aim of this study was to obtain microparticles containing acyclovir (ACV) and chitosan cross-linked with tripolyphosphate using the spray-drying technique. The resultant system was evaluated through loading efficiency, differential scanning calorimetry (DSC), thermogravimetric analysis (TG), X-ray powder diffraction (XRPD), scanning electron microscopy (SEM), in vitro release and stability studies. The results obtained indicated that the polymer/ACV ratio influenced the final properties of the microparticles, with higher ratios giving the best encapsulation efficiency, dissolution profiles and stability. The DSC and XRPD analyses indicated that the ACV was transformed into amorphous form during the spray-drying process

  9. Temperature-independent sensors based on perovskite-type oxides

    International Nuclear Information System (INIS)

    Zaza, F.; Frangini, S.; Masci, A.; Leoncini, J.; Pasquali, M.; Luisetto, I.; Tuti, S.

    2013-01-01

    The need of energy security and environment sustainability drives toward the development of energy technology in order to enhance the performance of internal combustion engines. Gas sensors play a key role for controlling the fuel oxygen ratio and monitoring the pollution emissions. The perovskite-type oxides can be synthesized for an extremely wide variety of combinations of chemical elements, allowing to design materials with suitable properties for sensing application. Lanthanum strontium ferrites, such as La 0.7 Sr 0.3 FeO 3 , are suitable oxygen sensing materials with temperature-independence conductivity, but they have low chemical stability under reducing conditions. The addition of aluminum into the perovskite structure improves the material properties in order to develop suitable oxygen sensing probes for lean burn engine control systems. Perovskite-type oxides with formula (La 0.7 Sr 0.3 )(Al x Fe 1−x )O 3 was synthesized by the citrate-nitrate combustion synthesis method. XRD analyses, show that it was synthesized a phase-pure powder belonging to the perovskite structure. Aluminum affects both the unit cell parameters, by shrinking the unit cell, and the powder morphology, by promoting the synthesis of particles with small crystallite size and large specific surface area. The partial substitution of iron with aluminum improves the chemical stability under reducing gas conditions and modulates the oxygen sensitivity by affecting the relative amount of Fe 4+ and Fe 3+ , as confirmed from TPR profiles. In the same time, the addition of aluminum does not affects the temperature-independent properties of lanthanum strontium ferrites. Indeed, the electrical measurements show that (La 0.7 Sr 0.3 )(Al x Fe 1−x )O 3 perovskites have temperature-independence conductivity from 900 K

  10. Temperature-independent sensors based on perovskite-type oxides

    Energy Technology Data Exchange (ETDEWEB)

    Zaza, F.; Frangini, S.; Masci, A. [ENEA-Casaccia R.C., Via Anguillarese 301, 00123 S.Maria di Galeria, Rome (Italy); Leoncini, J.; Pasquali, M. [University La Sapienza, Piazza Via del Castro Laurenziano 7, 00161 Rome (Italy); Luisetto, I.; Tuti, S. [University RomaTre, Rome 00146 (Italy)

    2014-06-19

    The need of energy security and environment sustainability drives toward the development of energy technology in order to enhance the performance of internal combustion engines. Gas sensors play a key role for controlling the fuel oxygen ratio and monitoring the pollution emissions. The perovskite-type oxides can be synthesized for an extremely wide variety of combinations of chemical elements, allowing to design materials with suitable properties for sensing application. Lanthanum strontium ferrites, such as La{sub 0.7}Sr{sub 0.3}FeO{sub 3}, are suitable oxygen sensing materials with temperature-independence conductivity, but they have low chemical stability under reducing conditions. The addition of aluminum into the perovskite structure improves the material properties in order to develop suitable oxygen sensing probes for lean burn engine control systems. Perovskite-type oxides with formula (La{sub 0.7}Sr{sub 0.3})(Al{sub x}Fe{sub 1−x})O{sub 3} was synthesized by the citrate-nitrate combustion synthesis method. XRD analyses, show that it was synthesized a phase-pure powder belonging to the perovskite structure. Aluminum affects both the unit cell parameters, by shrinking the unit cell, and the powder morphology, by promoting the synthesis of particles with small crystallite size and large specific surface area. The partial substitution of iron with aluminum improves the chemical stability under reducing gas conditions and modulates the oxygen sensitivity by affecting the relative amount of Fe{sup 4+} and Fe{sup 3+}, as confirmed from TPR profiles. In the same time, the addition of aluminum does not affects the temperature-independent properties of lanthanum strontium ferrites. Indeed, the electrical measurements show that (La{sub 0.7}Sr{sub 0.3})(Al{sub x}Fe{sub 1−x})O{sub 3} perovskites have temperature-independence conductivity from 900 K.

  11. Reading Comprehension Improvement with Individualized Cognitive Profiles and Metacognition

    Science.gov (United States)

    Allen, Kathleen D.; Hancock, Thomas E.

    2008-01-01

    This study models improving classroom reading instruction through valid assessment and individualized metacomprehension. Individualized cognitive profiles of Woodcock-Johnson III cognitive abilities correlated with reading comprehension were used during classroom independent reading for judgments of learning, feedback, self-reflection, and…

  12. Ideas for Medical Education: The Quarterly Profile Examination.

    Science.gov (United States)

    Arnold, Louise; Willoughby, T. Lee

    1990-01-01

    The school of medicine of the University of Missouri--Kansas City developed the Quarterly Profile Examination, a schoolwide, longitudinal comprehensive examination of knowledge acquisition and retention, to satisfy internal and external requirements for assessment. The system is seen as effective in fostering problem-based and independent learning…

  13. An impossibility theorem for parameter independent hidden variable theories

    Science.gov (United States)

    Leegwater, Gijs

    2016-05-01

    Recently, Roger Colbeck and Renato Renner (C&R) have claimed that '[n]o extension of quantum theory can have improved predictive power' (Colbeck & Renner, 2011, 2012b). If correct, this is a spectacular impossibility theorem for hidden variable theories, which is more general than the theorems of Bell (1964) and Leggett (2003). Also, C&R have used their claim in attempt to prove that a system's quantum-mechanical wave function is in a one-to-one correspondence with its 'ontic' state (Colbeck & Renner, 2012a). C&R's claim essentially means that in any hidden variable theory that is compatible with quantum-mechanical predictions, probabilities of measurement outcomes are independent of these hidden variables. This makes such variables otiose. On closer inspection, however, the generality and validity of the claim can be contested. First, it is based on an assumption called 'Freedom of Choice'. As the name suggests, this assumption involves the independence of an experimenter's choice of measurement settings. But in the way C&R define this assumption, a no-signalling condition is surreptitiously presupposed, making the assumption less innocent than it sounds. When using this definition, any hidden variable theory violating parameter independence, such as Bohmian Mechanics, is immediately shown to be incompatible with quantum-mechanical predictions. Also, the argument of C&R is hard to follow and their mathematical derivation contains several gaps, some of which cannot be closed in the way they suggest. We shall show that these gaps can be filled. The issue with the 'Freedom of Choice' assumption can be circumvented by explicitly assuming parameter independence. This makes the result less general, but better founded. We then obtain an impossibility theorem for hidden variable theories satisfying parameter independence only. As stated above, such hidden variable theories are impossible in the sense that any supplemental variables have no bearing on outcome probabilities

  14. Model independent Z' constraints at future e+e- colliders

    International Nuclear Information System (INIS)

    Leike, A.

    1993-11-01

    Model independent constraints on the mass of extra neutral gauge bosons and their couplings to charged leptons are given for LEP II and a 500 GeV e + e - collider. Analytical exclusion limits are derived in the Born approximation. The Z' limits obtained with radiative corrections are always worse than those calculated at the Born level. Polarized beams are only useful for degrees of polarization essentially larger than 50%. Known discovery limits on extra Z bosons predicted by popular Z' models are reproduced as special cases. The Z' constraints are compared to those predicted by four fermion contact interactions. (orig.)

  15. On model-independent analyses of elastic hadron scattering

    International Nuclear Information System (INIS)

    Avila, R.F.; Campos, S.D.; Menon, M.J.; Montanha, J.

    2007-01-01

    By means of an almost model-independent parametrization for the elastic hadron-hadron amplitude, as a function of the energy and the momentum transfer, we obtain good descriptions of the physical quantities that characterize elastic proton-proton and antiproton-proton scattering (total cross section, r parameter and differential cross section). The parametrization is inferred on empirical grounds and selected according to high energy theorems and limits from axiomatic quantum field theory. Based on the predictive character of the approach we present predictions for the above physical quantities at the Brookhaven RHIC, Fermilab Tevatron and CERN LHC energies. (author)

  16. The role of the independent neuropsychologist in special education.

    Science.gov (United States)

    Hurewitz, Felicia; Kerr, Sonja

    2011-08-01

    Neuropsychologists are playing an increasing role in special education. We explain steps that neuropsychologists can take to ethically and effectively approach the "quasi-forensic" role of independent evaluator. Because neuropsychologists may provide reports for treatment, school programming, and legal disputes, it is important that they are familiar with the school programming process and the unique litigation procedures available for children with disabilities in special education. We provide guidelines including determining referral questions, obtaining outside information, choosing assessments, considering the legal constructs of questions, reviewing discrepant results from other evaluations and Individual Education Plans and communicating ideas.

  17. Functional Independent Scaling Relation for ORR/OER Catalysts

    DEFF Research Database (Denmark)

    Christensen, Rune; Hansen, Heine Anton; Dickens, Colin F.

    2016-01-01

    reactions. Here, we show that the oxygen-oxygen bond in the OOH* intermediate is, however, not well described with the previously used class of exchange-correlation functionals. By quantifying and correcting the systematic error, an improved description of gaseous peroxide species versus experimental data...... and a reduction in calculational uncertainty is obtained. For adsorbates, we find that the systematic error largely cancels the vdW interaction missing in the original determination of the scaling relation. An improved scaling relation, which is fully independent of the applied exchange-correlation functional...

  18. A generalized model for site percolation with two independent concentrations

    International Nuclear Information System (INIS)

    Lin Jiancheng.

    1987-05-01

    In this paper the usual site percolation problem with single concentration is generalized to the one that contains two independent concentrations. Using the real space renormalization technique we derive an exact transformation for the one dimensional lattice and a cluster transformation for triangle lattice in two dimensions. The critical exponents and the percolation threshold concentrations obtained are the same as those of the usual single concentration percolation problem. Critical line and flow diagram in the two concentration parameters space are also given. (author). 10 refs, 6 figs

  19. The Scottish Independence Referendum and After

    Directory of Open Access Journals (Sweden)

    Michael Keating

    2015-04-01

    Full Text Available The Scottish independence referendum on 18 September 2014 produced an apparently decisive result, with 45 per cent for independence and 55 per cent against. Yet, it has not settled the constitutional issue. There was a huge public engagement in the campaign, which has left a legacy for Scottish and UK politics. Scotland has been reinforced as a political community. The losing Yes side has emerged in better shape and more optimistic, while the winners have struggled to formulate the better autonomy package they had promised. Public opinion continues to favour maximum devolution short of independence. Scotland is a case of the kind of spatial rescaling that is taking place more generally across Europe, as new forms of statehood and of sovereignty evolve. Scottish public opinion favours more self-government but no longer recognizes the traditional nation-state model presented in the referendum question.

  20. Independent events in elementary probability theory

    Science.gov (United States)

    Csenki, Attila

    2011-07-01

    In Probability and Statistics taught to mathematicians as a first introduction or to a non-mathematical audience, joint independence of events is introduced by requiring that the multiplication rule is satisfied. The following statement is usually tacitly assumed to hold (and, at best, intuitively motivated): quote specific-use="indent"> If the n events E 1, E 2, … , E n are jointly independent then any two events A and B built in finitely many steps from two disjoint subsets of E 1, E 2, … , E n are also independent. The operations 'union', 'intersection' and 'complementation' are permitted only when forming the events A and B. quote>Here we examine this statement from the point of view of elementary probability theory. The approach described here is accessible also to users of probability theory and is believed to be novel.

  1. Linear independence of localized magnon states

    International Nuclear Information System (INIS)

    Schmidt, Heinz-Juergen; Richter, Johannes; Moessner, Roderich

    2006-01-01

    At the magnetic saturation field, certain frustrated lattices have a class of states known as 'localized multi-magnon states' as exact ground states. The number of these states scales exponentially with the number N of spins and hence they have a finite entropy also in the thermodynamic limit N → ∞ provided they are sufficiently linearly independent. In this paper, we present rigorous results concerning the linear dependence or independence of localized magnon states and investigate special examples. For large classes of spin lattices, including what we call the orthogonal type and the isolated type, as well as the kagome, the checkerboard and the star lattice, we have proven linear independence of all localized multi-magnon states. On the other hand, the pyrochlore lattice provides an example of a spin lattice having localized multi-magnon states with considerable linear dependence

  2. Risk management for independent power projects

    International Nuclear Information System (INIS)

    Owen, J.L.

    1993-01-01

    Independent Power, where electric utilities or other bulk electric power users contract with individual electric power generation facilities to meet their projected long term power needs, has grown dramatically over the past ten years or more. This concept, to contract with Independent Power Producers (IPP), is not a new concept and in fact goes back to the early formation of the electric power industry in this country and worldwide. Successful Risk Management is the foundation for ultimate project completion and operation in fulfilling the expectations of all parties. The primary risks associated with the development of Independent Power projects include: predicting long term fuel availability and cost; predicting long term price for the deliverable of electricity; site selection, site characteristics and permitting; innovative or evolving technology; project execution (design and construction), and; lifetime O ampersand M costs and plant reliability. This paper focuses on the risks inherent in the development of IPPs and addresses the management of these risks

  3. Prognostic Impact of Array-based Genomic Profiles in Esophageal Squamous Cell Cancer

    International Nuclear Information System (INIS)

    Carneiro, Ana; Isinger, Anna; Karlsson, Anna; Johansson, Jan; Jönsson, Göran; Bendahl, Pär-Ola; Falkenback, Dan; Halvarsson, Britta; Nilbert, Mef

    2008-01-01

    Esophageal squamous cell carcinoma (ESCC) is a genetically complex tumor type and a major cause of cancer related mortality. Although distinct genetic alterations have been linked to ESCC development and prognosis, the genetic alterations have not gained clinical applicability. We applied array-based comparative genomic hybridization (aCGH) to obtain a whole genome copy number profile relevant for identifying deranged pathways and clinically applicable markers. A 32 k aCGH platform was used for high resolution mapping of copy number changes in 30 stage I-IV ESCC. Potential interdependent alterations and deranged pathways were identified and copy number changes were correlated to stage, differentiation and survival. Copy number alterations affected median 19% of the genome and included recurrent gains of chromosome regions 5p, 7p, 7q, 8q, 10q, 11q, 12p, 14q, 16p, 17p, 19p, 19q, and 20q and losses of 3p, 5q, 8p, 9p and 11q. High-level amplifications were observed in 30 regions and recurrently involved 7p11 (EGFR), 11q13 (MYEOV, CCND1, FGF4, FGF3, PPFIA, FAD, TMEM16A, CTTS and SHANK2) and 11q22 (PDFG). Gain of 7p22.3 predicted nodal metastases and gains of 1p36.32 and 19p13.3 independently predicted poor survival in multivariate analysis. aCGH profiling verified genetic complexity in ESCC and herein identified imbalances of multiple central tumorigenic pathways. Distinct gains correlate with clinicopathological variables and independently predict survival, suggesting clinical applicability of genomic profiling in ESCC

  4. Strain profiles in ion implanted ceramic polycrystals: An approach based on reciprocal-space crystal selection

    Energy Technology Data Exchange (ETDEWEB)

    Palancher, H., E-mail: herve.palancher@cea.fr; Martin, G.; Fouet, J. [CEA, DEN, DEC, F-13108 Saint Paul lez Durance (France); Goudeau, P. [Institut Pprime, CNRS-Université de Poitiers–ENSMA, SP2MI, F-86360 Chasseneuil (France); Boulle, A. [Science des Procédés Céramiques et Traitements de Surface (SPCTS), CNRS UMR 7315, Centre Européen de la Céramique, 12 rue Atlantis, 87068 Limoges (France); Rieutord, F. [CEA, DSM, INAC, F-38054 Grenoble Cedex 9 (France); Favre-Nicolin, V. [Université Grenoble-Alpes, F-38041 Grenoble, France, Institut Universitaire de France, F-75005 Paris (France); Blanc, N. [Institut NEEL, CNRS-Univ Grenoble Alpes, F-38042 Grenoble (France); Onofri, C. [CEA, DEN, DEC, F-13108 Saint Paul lez Durance (France); CEMES, CNRS UPR 8011, 29 rue Jeanne Marvig, BP 94347, 31055 Toulouse Cedex 4 (France)

    2016-01-18

    The determination of the state of strain in implanted materials is a key issue in the study of their mechanical stability. Whereas this question is nowadays relatively easily solved in the case of single crystals, it remains a challenging task in the case of polycrystalline materials. In this paper, we take benefit of the intense and parallel beams provided by third generation synchrotron sources combined with a two-dimensional detection system to analyze individual grains in polycrystals, hence obtaining “single crystal-like” data. The feasibility of the approach is demonstrated with implanted UO{sub 2} polycrystals where the in-depth strain profile is extracted for individual grains using numerical simulations of the diffracted signal. The influence of the implantation dose is precisely analyzed for several diffracting planes and grains. This work suggests that, at low fluences, the development of strain is mainly due to ballistic effects with little effect from He ions, independently from the crystallographic orientation. At higher fluences, the evolution of the strain profiles suggests a partial and anisotropic plastic relaxation. With the present approach, robust and reliable structural information can be obtained, even from complex polycrystalline ceramic materials.

  5. Economy Profile of Argentina

    OpenAIRE

    World Bank Group

    2017-01-01

    Doing Business 2018 is the 15th in a series of annual reports investigating the regulations that enhance business activity and those that constrain it. This economy profile presents the Doing Business indicators for Argentina. Doing Business presents quantitative indicators on business regulation and the protection of property rights that can be compared across 190 economies; for 2018 Arge...

  6. Economy Profile of Estonia

    OpenAIRE

    World Bank Group

    2017-01-01

    Doing Business 2018 is the 15th in a series of annual reports investigating the regulations that enhance business activity and those that constrain it. This economy profile presents the Doing Business indicators for Estonia. Doing Business presents quantitative indicators on business regulation and the protection of property rights that can be compared across 190 economies; for 2018 Estonia ...

  7. Economy Profile of Australia

    OpenAIRE

    World Bank Group

    2017-01-01

    Doing Business 2018 is the 15th in a series of annual reports investigating the regulations that enhance business activity and those that constrain it. This economy profile presents the Doing Business indicators for Australia. Doing Business presents quantitative indicators on business regulation and the protection of property rights that can be compared across 190 economies; for 2018 Aust...

  8. Profiling & Utilizing Learning Style.

    Science.gov (United States)

    Keefe, James W., Ed.

    The purpose of the National Association of Secondary School Principals (NASSP) Learning Style Profile is to provide educators with a well-validated and easy-to-use instrument for diagnosing the cognitive styles, perceptual response tendencies, and study/instructional preferences of middle level and senior high school students. The Learning Style…

  9. Country Profiles, Malaysia.

    Science.gov (United States)

    Marzuki, Ariffin Bin; Peng, J. Y.

    A profile of Malaysia is sketched in this paper. Emphasis is placed on the nature, scope, and accomplishments of population activities in the country. Topics and sub-topics include: location and description of the country; population (size, growth patterns, age structure, urban/rural distribution, ethnic and religious composition, migration,…

  10. Economy Profile of Bolivia

    OpenAIRE

    World Bank Group

    2017-01-01

    Doing Business 2018 is the 15th in a series of annual reports investigating the regulations that enhance business activity and those that constrain it. This economy profile presents the Doing Business indicators for Bolivia. Doing Business presents quantitative indicators on business regulation and the protection of property rights that can be compared across 190 economies; for 2018 Bolivia ...

  11. Culinary Arts Profile.

    Science.gov (United States)

    Missouri Univ., Columbia. Instructional Materials Lab.

    This chart is intended for use in documenting the fact that a student participating in a culinary arts program has achieved the performance standards specified in the Missouri Competency Profile for culinary arts. The chart includes space for recording basic student and instructor information and the student's on-the-job training and work…

  12. Beam profile monitor

    International Nuclear Information System (INIS)

    Krausse, G.J.; Gram, P.A.M.

    1978-05-01

    A system used to monitor secondary beam profiles at the LAMPF Linac for channel tune-up and diagnostics is described. The multiwire proportional chamber design is discussed, and descriptions and drawings of the gate card, the amplifier/multiplexer card, the output amplifier card, and the overall system are given

  13. Simple beam profile monitor

    Energy Technology Data Exchange (ETDEWEB)

    Gelbart, W.; Johnson, R. R.; Abeysekera, B. [ASD Inc. Garden Bay, BC (Canada); Best Theratronics Ltd Ottawa Ontario (Canada); PharmaSpect Ltd., Burnaby BC (Canada)

    2012-12-19

    An inexpensive beam profile monitor is based on the well proven rotating wire method. The monitor can display beam position and shape in real time for particle beams of most energies and beam currents up to 200{mu}A. Beam shape, position cross-section and other parameters are displayed on a computer screen.

  14. Modeling shoreface profile evolution

    NARCIS (Netherlands)

    Stive, M.J.F.; De Vriend, H.J.

    1995-01-01

    Current knowledge of hydro-, sediment and morpho-dynamics in the shoreface environment is insufficient to undertake shoreface-profile evolution modelling on the basis of first physical principles. We propose a simple, panel-type model to map observed behaviour. The internal dynamics are determined

  15. Modelling shoreface profile evolution

    NARCIS (Netherlands)

    Stive, Marcel J.F.; de Vriend, Huib J.

    1995-01-01

    Current knowledge of hydro-, sediment and morpho-dynamics in the shoreface environment is insufficient to undertake shoreface-profile evolution modelling on the basis of first physical principles. We propose a simple, panel-type model to map observed behaviour. The internal dynamics are determined

  16. A temperature profiler

    Digital Repository Service at National Institute of Oceanography (India)

    Peshwe, V.B.; Desa, E.

    An instrument developed for measuring temperature profiles at sea in depth or time scales is described. PC-based programming offers flexibility in setting up the instrument for the mode of operation prior to each cast. A real time clock built...

  17. Country Demographic Profiles: Thailand.

    Science.gov (United States)

    Bureau of the Census (DOC), Suitland, MD. Population Div.

    This profile of the population of Thailand contains 35 tables of selected demographic information, including size of population and estimates of fertility and mortality, beginning in 1950. An adjusted distribution of the population by age and sex is given for the latest census year, as well as for 1976. Projections of the number of women of…

  18. Polysome Profile Analysis - Yeast

    Czech Academy of Sciences Publication Activity Database

    Pospíšek, M.; Valášek, Leoš Shivaya

    2013-01-01

    Roč. 530, č. 2013 (2013), s. 173-181 ISSN 0076-6879 Institutional support: RVO:61388971 Keywords : grow yeast cultures * polysome profile analysis * sucrose density gradient centrifugation Subject RIV: CE - Biochemistry Impact factor: 2.194, year: 2013

  19. A Danish Profiling System

    DEFF Research Database (Denmark)

    Rosholm, Michael; Staghøj, Jonas; Svarer, Michael

    2006-01-01

    This paper describes the statistical model used for profiling new unemployed workers in Denmark. When a worker – during his or her first six months in unemployment – enters the employment office for the first time, this model predicts whether or not he or she will be unemployed for more than six ...

  20. Source independence and the EPR paradox

    International Nuclear Information System (INIS)

    Mould, R.A.

    1989-01-01

    It is shown that the lines of action between the photon pairs resulting from a positronium decay are not necessarily in line with the original positronium atom. It is also shown why this 'source-independent' effect is not normally observed, although it is observable in principle. Moreover our initial concerns and some conclusions as they bear on the theory of measurement in quantum mechanics are discussed. Source-independence is shown to give a satisfactory response to a special form of the Einstein-Podolsky-Rosen paradox involving pairs of position measurements. It also leads to a nonlocal relationship between position measurements that depends on the width of the position detectors