WorldWideScience

Sample records for profile sweden electronic

  1. English Language Teaching Profile: Sweden.

    Science.gov (United States)

    British Council, London (England). English-Teaching Information Centre.

    This profile in outline form of the English language teaching situation in Sweden discusses the role of English within Swedish society and within the Swedish educational system. The status of English as the principal foreign language since 1945 for use in business, the media and tourism is pointed out. The system of English instruction in the…

  2. Country policy profile - Sweden. October 2014

    International Nuclear Information System (INIS)

    2014-10-01

    The main support mechanism for electricity from RES is a quota system that is based on a certificate trading system. Furthermore, tax incentives are in place and PV installations are subsidised with grants. Promotion of heating from RES is mainly promoted through tax exemptions. Households may deduct investments of renewable energy heating installations replacing heating systems based on fossil fuels from tax. Heating from RES further benefits from an exemption of various taxes, as carbon dioxide taxes on supply, import and production of fossil fuels for heating purposes, which apply for fossil fuels (Source, RES LEGAL Europe, www.res-legal.eu/search-by-country/sweden/)

  3. A profile and analysis of willow growers in Sweden

    International Nuclear Information System (INIS)

    Rosenqvist, H.; Roos, A.; Ling, E.; Hektor, B.

    1999-01-01

    Willow plantations on Swedish farmland increased considerably between 1991 and 1996. The main driving forces behind this development were (1) the 1991 introduction of an agriculture deregulation policy in Sweden which created lower grain prices and simultaneously introduced compensation for set-aside land and subsidies for willow plantations on surplus arable land, (2) higher taxes on fossil fuels, and (3) the existence of a biofuel market in Sweden based on forest fuels. This paper presents a statistical study of 1,158 willow growers in southern and central-eastern Sweden. The resulting profile of growers will help policy makers and agents in the bioenergy business design information campaigns and marketing strategies. Willow growers are described according to geographical distribution, willow parcel sizes, farm sizes, and farm types. They are compared with the population of farmers who are not growing willow. Willow growers are more often between 50-65 years of age, and they have larger farms than non-willow growers. They are less often focused on animal and milk production and more often on cereal and food crop production than are other farmers. (author)

  4. Sweden

    International Nuclear Information System (INIS)

    2011-01-01

    The Swedish nuclear industry is - like in many countries - in a state of rejuvenation. During the coming ten years, 6000 new staff will be employed, which in volume corresponds to the entire present industry. These numbers are based on retirements (easy to estimate), increased needs due to new-build, and to increased mobility of the new staff to be employed (more difficult to estimate). Until now, employment in nuclear power have often lasted very long. We anticipate, however, that the young people that will be recruited will be less prone to stay at the same place for long. Until now, Sweden has never had a dedicated bachelor level nuclear engineering programme. This will, however, change. A new programme will start at Uppsala University in autumn 2010. An existing 3-year bachelor-level mechanics engineering education programme will get a third-year specialization in nuclear engineering. This specialization has been designed to allow students from any technical college or university in Sweden with mechanical or electric engineering in the curriculum. The studies will be in Swedish. Industry is involved both as sponsors and as contributors. The industry educational company (KSU) is closely involved, e.g. with simulator training. The Royal Institute of Technology (KTH), Stockholm, has offered an international MSc in nuclear engineering since 2008. The programme has attracted 10-15 students per year. In addition, students at other programmes participate in some courses, resulting in about 25 students in an average course. Chalmers Institute of Technology, Gothenburg, has started a new nuclear engineering MSc programme in autumn 2009. The programme has equal shares of reactor physics/technology and nuclear chemistry, reflecting the competence profile at Chalmers. This special curriculum is highly appreciated by the Ringhals nuclear power plant nearby, that houses three PWRs, and needs staff with combined reactor physics and nuclear chemistry competence. Uppsala

  5. Country Waste Profile Report for Sweden. Reporting Year: 2006

    International Nuclear Information System (INIS)

    2006-01-01

    The IAEA Country Waste Profile Reports include data on: • Waste in Storage and Disposal (including historical disposal no longer practiced); • Treatment & Conditioning Capabilities; • Major milestones in programme and facility development; • Regulatory Authorities; • Policies, Laws & Regulations; • Disused Radioactive Sources (for some Member States)

  6. Country Waste Profile Report for Sweden. Reporting Year: 2007

    International Nuclear Information System (INIS)

    2007-01-01

    The IAEA Country Waste Profile Reports include data on: • Waste in Storage and Disposal (including historical disposal no longer practiced); • Treatment & Conditioning Capabilities; • Major milestones in programme and facility development; • Regulatory Authorities; • Policies, Laws & Regulations; • Disused Radioactive Sources (for some Member States)

  7. Country Waste Profile Report for Sweden. Reporting Year: 2005

    International Nuclear Information System (INIS)

    2005-01-01

    The IAEA Country Waste Profile Reports include data on: • Waste in Storage and Disposal (including historical disposal no longer practiced); • Treatment & Conditioning Capabilities; • Major milestones in programme and facility development; • Regulatory Authorities; • Policies, Laws & Regulations; • Disused Radioactive Sources (for some Member States)

  8. Country Waste Profile Report for Sweden. Reporting Year: 2008

    International Nuclear Information System (INIS)

    2008-01-01

    The IAEA Country Waste Profile Reports include data on: • Waste in Storage and Disposal (including historical disposal no longer practiced); • Treatment & Conditioning Capabilities; • Major milestones in programme and facility development; • Regulatory Authorities; • Policies, Laws & Regulations; • Disused Radioactive Sources (for some Member States)

  9. Electron shower transverse profile measurement

    International Nuclear Information System (INIS)

    Lednev, A.A.

    1993-01-01

    A method to measure the shower transverse profile is described. Calibration data of the lead-glass spectrometer GAMS collected in a wide electron beam without any additional coordinate detector are used. The method may be used for the measurements in both cellular- and projective-type spectrometers. The results of measuring the 10 GeV electron shower profile in the GAMS spectrometer, without optical grease between the lead-glass radiators and photomultipliers, are approximated with an analytical function. The estimate of the coordinate accuracy is obtained. 5 refs., 8 figs

  10. Cohort Profile: the National Prostate Cancer Register of Sweden and Prostate Cancer data Base Sweden 2.0.

    Science.gov (United States)

    Van Hemelrijck, Mieke; Wigertz, Annette; Sandin, Fredrik; Garmo, Hans; Hellström, Karin; Fransson, Per; Widmark, Anders; Lambe, Mats; Adolfsson, Jan; Varenhorst, Eberhard; Johansson, Jan-Erik; Stattin, Pär

    2013-08-01

    In 1987, the first Regional Prostate Cancer Register was set up in the South-East health-care region of Sweden. Other health-care regions joined and since 1998 virtually all prostate cancer (PCa) cases are registered in the National Prostate Cancer Register (NPCR) of Sweden to provide data for quality assurance, bench marking and clinical research. NPCR includes data on tumour stage, Gleason score, serum level of prostate-specific antigen (PSA) and primary treatment. In 2008, the NPCR was linked to a number of other population-based registers by use of the personal identity number. This database named Prostate Cancer data Base Sweden (PCBaSe) has now been extended with more cases, longer follow-up and a selection of two control series of men free of PCa at the time of sampling, as well as information on brothers of men diagnosed with PCa, resulting in PCBaSe 2.0. This extension allows for studies with case-control, cohort or longitudinal case-only design on aetiological factors, pharmaceutical prescriptions and assessment of long-term outcomes. The NPCR covers >96% of all incident PCa cases registered by the Swedish Cancer Register, which has an underreporting of <3.7%. The NPCR is used to assess trends in incidence, treatment and outcome of men with PCa. Since the national registers linked to PCBaSe are complete, studies from PCBaSe 2.0 are truly population based.

  11. Violent mass shootings in Sweden from 1960 to 1995: profiles, patterns, and motives.

    Science.gov (United States)

    Lindquist, O; Lidberg, L

    1998-03-01

    During the past few decades, violent mass shooting in Sweden has increased rapidly. In the 36 years between 1960 and 1995, fourteen such occasions were recorded, during which 32 people were killed and 57 were wounded. The 14 offenders were men between the ages of 17 and 61 years. In the 20 years from 1960 to 1979, five shootings were committed by five offenders, leaving 10 dead and 13 wounded; in the 16 years between 1980 and 1995, there were nine different shootings committed by nine offenders, with 22 dead and 44 wounded. Seven of the shootings were classified as mass shootings, six as spree shootings, and one as a serial shooting. In all but four of these cases, the firearms used were illegal weapons. The four legal firearms belonged to an unemployed young laborer, an officer, a former United Nations (U.N.) soldier, and a member of the Swedish military volunteer corps. Of those killed, 68.8% were strangers to the offender; among the wounded, the corresponding figure was 89.5%. Profiles of the offenders and of the victims were studied. The psychiatric diagnoses among the offenders and the measures taken to prevent the increase in mass shooting in Sweden are presented.

  12. Ethnoculturally-profiled care: Dementia caregiving targeted towards Middle Eastern immigrants living in Sweden.

    Directory of Open Access Journals (Sweden)

    Eleonor Antelius

    2016-12-01

    Full Text Available This study was set out to explore the understanding of dementia as a culturally and socially shaped illness in order to illuminate such perceptions and experience in relation to ethnoculturally profiled dementia care in Sweden. The results indicate, contrary to many other studies (c.f. Conell et al 2009; Flaskerud 2009; Gray et al 2009; Hinton, Franz & Friend 2004 that the perception of dementia and the described meaning of the disease have little (or nothing to do with decisions regarding formal care. However, cultural norms and traditions in relation to issues of filial piety seem to do. Thus, to understand how different ethnocultural groups might respond to dementia care within a migratory context, the current study illuminate the fact that it is crucial to realize that neither the individual person with dementia, nor larger ethnocultural groups can be placed within a vacuum that seemingly does not change or correlate with surrounding society.

  13. Children's Agency in Creating and Maintaining Language Policy in Practice in Two "Language Profile" Preschools in Sweden

    Science.gov (United States)

    Boyd, Sally; Huss, Leena; Ottesjö, Cajsa

    2017-01-01

    This paper presents results from an ethnographic study of language policy as it is enacted in everyday interaction in two language profile preschools in Sweden with explicit monolingual language policies: English and Finnish, respectively. However, in both preschools, children are free to choose language or code alternate. The study shows how…

  14. Parametric dependencies of JET electron temperature profiles

    Energy Technology Data Exchange (ETDEWEB)

    Schunke, B [Commission of the European Communities, Abingdon (United Kingdom). JET Joint Undertaking; Imre, K; Riedel, K [New York Univ., NY (United States)

    1994-07-01

    The JET Ohmic, L-Mode and H-Mode electron temperature profiles obtained from the LIDAR Thomson Scattering Diagnostic are parameterized in terms of the normalized flux parameter and a set of the engineering parameters like plasma current, toroidal field, line averages electron density... It is shown that the electron temperature profiles fit a log-additive model well. It is intended to use the same model to predict the profile shape for D-T discharges in JET and in ITER. 2 refs., 5 figs.

  15. Crustal structure in the Kiruna area, northern Sweden, based on seismic reflection profiling

    Science.gov (United States)

    Juhojuntti, Niklas; Bergman, Stefan; Olsson, Sverker

    2013-04-01

    Northernmost Sweden is currently one of the most active mining areas in Europe. In order to better understand the regional three-dimensional crustal structure and to support deep ore exploration, we have acquired a 74 km long seismic reflection profile in the Kiruna area. The upper crust in this area is largely composed of various supracrustal units, which are dominated by metabasalts, acidic metavolcanics and clastic metasedimentary rocks, resting on an Archaean metagranitoid complex. All of these units have been intruded by plutonic rocks, and to variable degrees folded, sheared and metamorphosed, during the Svecokarelian orogeny. The profile crosses several steep ductile shear zones, some of which extend for hundreds of kilometres along strike. Many of the lithological contacts and deformation zones are expected to be seismically reflective. The profile is located only a few kilometres from the world's largest underground iron-ore mine in Kiruna, and closer to the profile there are several known ore bodies, some of which are active exploration targets. For the seismic recording we used approximately 350 geophones in split-spread configuration, at a separation of 25 m. The main seismic source was the Vibsist system (an impact source), which normally was employed at every geophone station. We also fired explosive charges (8-16 kg) at a few locations distributed along the profile to image deeper structures, although at very low resolution. Wireless seismometers were placed along and to the side of the profile, mainly in order to achieve better velocity control and to study out-of-the-plane reflections. Some mining blasts in Kiruna were also recorded. The upper crust in the area is quite reflective, most clearly demonstrated by the dynamite shot records. Some of the reflections appear to originate from steeply dipping structures. The dynamite shot records show a set of reflections at 3-4 s twt, corresponding to a depth of roughly 10 km, the explanation for which is

  16. Electronics Technology. Tech Prep Competency Profile.

    Science.gov (United States)

    Lakeland Tech Prep Consortium, Kirtland, OH.

    This tech prep competency profile covers the occupation of electronics technician. Section 1 provides the occupation definition. Section 2 lists development committee members. Section 3 provides the leveling codes--abbreviations for grade level, (by the end of grade 12, by the end of associate degree), academic codes (communications, math, or…

  17. Beam profile for Malaysian electron accelerator

    International Nuclear Information System (INIS)

    Abu Bakar Ghazali; Muhamad Zahidee Taat

    2007-01-01

    This paper comprises of two calculations that require in designing a dose profile for an electron accelerator machine before its fabrication. The first is to calculate the beam deflection due to changes of high voltage (HV) supply as well as the deflection coil currents so that the electron beam will only scan at the window foil of 18 cm length and 6 cm width. Secondly, we also require to calculate the beam profile at 50 mm underneath the window foil. The electron gun that produces a beam of 10 mm diameter has to be oscillated in a sawtooth wave for the prescribed window size at frequencies of 50 Hz and 400 Hz along the length and width directions respectively. For the beam deflection, we apply a basic formula from Lorentz force law to obtain a set of HV supply and the coil current that is suitable for both deflections and this result can assist in designing the coil current against HV changes via an electronic controller. The dose profile was calculated using the RMS current formulation along the length direction. We found that the measured and the calculated RMS currents are in comparable for the case of 1 MeV, 50 mA accelerator facility that is going to be installed at Nuclear Malaysia complex. A similar measurement will be carried out for our locally designed accelerator of 150 KeV, 10 mA after fabrication and installation of the machine are completed. (Author)

  18. Electron Bernstein wave electron temperature profile diagnostic (invited)

    International Nuclear Information System (INIS)

    Taylor, G.; Efthimion, P.; Jones, B.; Munsat, T.; Spaleta, J.; Hosea, J.; Kaita, R.; Majeski, R.; Menard, J.

    2001-01-01

    Electron cyclotron emission (ECE) has been employed as a standard electron temperature profile diagnostic on many tokamaks and stellarators, but most magnetically confined plasma devices cannot take advantage of standard ECE diagnostics to measure temperature. They are either ''overdense,'' operating at high density relative to the magnetic field (e.g., ω pe >>Omega ce in a spherical torus) or they have insufficient density and temperature to reach the blackbody condition (τ>2). Electron Bernstein waves (EBWs) are electrostatic waves that can propagate in overdense plasmas and have a high optical thickness at the electron cyclotron resonance layers as a result of their large k perp . In this article we report on measurements of EBW emission on the CDX-U spherical torus, where B 0 ∼2kG, e >∼10 13 cm -3 and T e ∼10--200eV. Results are presented for electromagnetic measurements of EBW emission, mode converted near the plasma edge. The EBW emission was absolutely calibrated and compared to the electron temperature profile measured by a multipoint Thomson scattering diagnostic. Depending on the plasma conditions, the mode-converted EBW radiation temperature was found to be ≤T e and the emission source was determined to be radially localized at the electron cyclotron resonance layer. A Langmuir triple probe and a 140 GHz interferometer were employed to measure changes in the edge density profile in the vicinity of the upper hybrid resonance where the mode conversion of the EBWs is expected to occur. Initial results suggest EBW emission and EBW heating are viable concepts for plasmas where ω pe >>Omega ce

  19. Profiles of an initially perturbed electron beam

    International Nuclear Information System (INIS)

    Abdelsalam, F.W.

    1991-01-01

    This paper discusses the solutions for the profiles of an electron beam which is launched into a constant magnetic field with an initial boundary slope and injected with a radius which is greater or less than the cathode radius. It has been found that the outermost electron traces sine waves and executes limited excursions when the initial boundary slope corresponds to angles up to 1 degree, no matter whether the initial radius is 0.90 or 1.10 times the radius of the cathode. For initial inclination angles close to 2 degrees, the beam boundary does not preserve a sinusoidal shape, this statement holds true for focusing magnetic flux densities varying from 200x10 -4 to 700x10 -4 weber per square meter

  20. Electron density profile in multilayer systems

    International Nuclear Information System (INIS)

    Toekesi, K.

    2004-01-01

    Complete text of publication follows. Electron energy loss spectroscopy (EELS) has been used extensively to study the multilayer systems, where the thickness of layers are in the nanometer range. These studies has received considerable attention because of its technological interest, for example in the nanotechnology. On the most fundamental level, its importance is derived from the basic physics that is involved. One key quantities of interest is the response of a many-body system to an external perturbation: How act and how modify the interface between the solid-solid or solid-vacuum the excitations in the solid and in the vicinity of the interfaces. In this work, as a starting point of such investigations we calculated the electron density profile for multilayer systems. Our approach employs the time-dependent density functional theory (TDDFT), that is, the solution of a time-dependent Schroedinger equation in which the potential and forces are determined selfconsistently from the dynamics governed by the Schroedinger equation. We treat the problem in TDDFT at the level of the local-density approximation (LDA). Later, the comparison of experimentally obtained loss functions and the theory, based on our TDDFT calculations can provide deeper understanding of surface physics. We performed the calculations for half-infinite samples characterized by r s =1.642 and r s =1.997. We also performed the calculations for double layer systems. The substrate was characterized by r s =1.997 and the coverage by r s =1.642. Fig. 1. shows the obtained electron density profile in LDA approximation. Because of the sharp cutoff of electronic wave vectors at the Fermi surface, the densities in the interior exhibit slowly decaying Friedel oscillations. To highlight the Friedel oscillation we enlarged the electron density profile in Fig. 1a. and Fig. 1b. The work was supported by the Hungarian Scientific Research Found: OTKA No. T038016, the grant 'Bolyai' from the Hungarian Academy of

  1. Stratospheric NO2 vertical profile retrieved from ground-based Zenith-Sky DOAS observations at Kiruna, Sweden

    Science.gov (United States)

    Gu, Myojeong; Enell, Carl-Fredrik; Hendrick, François; Pukite, Janis; Van Roozendael, Michel; Platt, Ulrich; Raffalski, Uwe; Wagner, Thomas

    2014-05-01

    Stratospheric NO2 destroys ozone and acts as a buffer against halogen-catalyzed ozone loss through the formation of reservoir species (ClONO2, BrONO2). Since the importance of both mechanisms depends on the altitude, the investigation of stratospheric NO2 vertical distribution can provide more insight into the role of nitrogen compounds in the destruction of ozone. Here we present stratospheric NO2 vertical profiles retrieved from twilight ground-based zenith-sky DOAS observations at Kiruna, Sweden (68.84°N, 20.41°E) covering 1997 - 2013 periods. This instrument observes zenith scattered sunlight. The sensitivity for stratospheric trace gases is highest during twilight due to the maximum altitude of the scattering profile and the light path through the stratosphere, which vary with the solar zenith angle. The profiling algorithm, based on the Optimal Estimation Method, has been developed by IASB-BIRA and successfully applied at other stations (Hendrick et al., 2004). The basic principle behind this profiling approach is that during twilight, the mean Rayleigh scattering altitude scans the stratosphere rapidly, providing height-resolved information on the absorption by stratospheric NO2. In this study, the long-term evolution of the stratospheric NO2 profile at polar latitude will be investigated. Hendrick, F., B. Barret, M. Van Roozendael, H. Boesch, A. Butz, M. De Mazière, F. Goutail, C. Hermans, J.-C. Lambert, K. Pfeilsticker, and J.-P. Pommereau, Retrieval of nitrogen dioxide stratospheric profiles from ground-based zenith-sky UV-visible observations: Validation of the technique through correlative comparisons, Atmospheric Chemistry and Physics, 4, 2091-2106, 2004

  2. Defence electronics industry profile, 1990-1991

    Science.gov (United States)

    The defense electronics industry profiled in this review comprises an estimated 150 Canadian companies that develop, manufacture, and repair radio and communications equipment, radars for surveillance and navigation, air traffic control systems, acoustic and infrared sensors, computers for navigation and fire control, signal processors and display units, special-purpose electronic components, and systems engineering and associated software. Canadian defense electronics companies generally serve market niches and end users of their products are limited to the military, government agencies, or commercial airlines. Geographically, the industry is concentrated in Ontario and Quebec, where about 91 percent of the industry's production and employment is found. In 1989, the estimated revenue of the industry was $2.36 billion, and exports totalled an estimated $1.4 billion. Strengths and weaknesses of the industry are discussed in terms of such factors as the relatively small size of Canadian companies, the ability of Canadian firms to access research and development opportunities and export markets in the United States, the dependence on foreign-made components, and international competition.

  3. 137Cs deposition in peat profiles on a raised bog in central Sweden

    International Nuclear Information System (INIS)

    Rosen, K.; Vinichuk, M.; Galan, P.R.; Johanson, K.J.

    2009-01-01

    Distribution of 137 Cs depositions within peat profiles in open bog and nearby (low pine) sites in raised bog are shown and discussed. A possible involvement of Sphagnum moss in radionuclide binding and retention in such nutrient poor ecosystem is suggested. (au)

  4. Observation of electron temperature profile in HL-1M tokamak

    International Nuclear Information System (INIS)

    Cao Jianyong; Xu Deming; Ding Xuantong

    2000-01-01

    The principle and method of the electron temperature measurement by means of electron cyclotron emission (ECE) have been described. Several results under different conditions on HL-1M tokamak have been given. The hollow profile of electron temperature appears in some stages, such as current rising, pellet injection and impurity concentration in the plasma centre. When the bias voltage is applied, the electron temperature profile become steeper. All of the phenomena are related with the transport in plasma centre

  5. Measurement of electron beams profile of pierce type electron source using sensor of used Tv tube

    International Nuclear Information System (INIS)

    Darsono; Suhartono; Suprapto; Elin Nuraini

    2015-01-01

    The measurement of an electron beam profile has been performed using electron beam monitor based on method of phosphorescent materials. The main components of the electron beam monitor consists of a fluorescent sensor using a used Tv tube, CCTV camera to record images on a Tv screen, video adapter as interface between CCTV and laptop, and the laptop as a viewer and data processing. Two Pierce-type electron sources diode and triode was measured the shape of electron beam profile in real time. Results of the experiments showed that the triode electron source of Pierce type gave the shape of electron beam profiles better than that of the diode electron source .The anode voltage is not so influential on the beam profile shape. The focused voltage in the triode electron source is so influence to the shape of the electron beam profile, but above 5 kV no great effect. It can be concluded that the electron beam monitor can provide real time observations and drawings shape of the electron beam profile displayed on the used Tv tube glass screen which is the real picture of the shape of the electron beam profile. Triode electron source produces a better electron beam profile than that of the diode electron source. (author)

  6. Electron Density Profile Data Contains Virtual Height/Frequency Pairs from a Profile or Profiles (Composite Months) of Ionograms

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Electron Density Profile, N(h), data set contains both individual profiles and composite months. The data consist of virtual height/frequency pairs from a...

  7. Comparison of stratospheric NO2 profiles above Kiruna, Sweden retrieved from ground-based zenith sky DOAS measurements, SAOZ balloon measurements and SCIAMACHY limb observations

    Science.gov (United States)

    Gu, Myojeong; Enell, Carl-Fredrik; Hendrick, François; Pukite, Janis; Van Roozendael, Michel; Platt, Ulrich; Raffalski, Uwe; Wagner, Thomas

    2015-04-01

    Stratospheric NO2 not only destroys ozone but acts as a buffer against halogen catalyzed ozone loss by converting halogen species into stable nitrates. These two roles of stratospheric NO2 depend on the altitude. Hence, the objective of this study is to investigate the vertical distribution of stratospheric NO2. We compare the NO2 profiles derived from the zenith sky DOAS with those obtained from, SAOZ balloon measurements and satellite limb observations. Vertical profiles of stratospheric NO2 are retrieved from ground-based zenith sky DOAS observations operated at Kiruna, Sweden (68.84°N, 20.41°E) since 1996. To determine the profile of stratospheric NO2 measured from ground-based zenith sky DOAS, we apply the Optimal Estimation Method (OEM) to retrieval of vertical profiles of stratospheric NO2 which has been developed by IASB-BIRA. The basic principle behind this profiling approach is the dependence of the mean scattering height on solar zenith angle (SZA). We compare the retrieved profiles to two additional datasets of stratospheric NO2 profile. The first one is derived from satellite limb observations by SCIAMACHY (Scanning Imaging Absorption spectrometer for Atmospheric CHartographY) on EnviSAT. The second is derived from the SAOZ balloon measurements (using a UV/Visible spectrometer) performed at Kiruna in Sweden.

  8. Sweden - Physics in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1995-11-15

    In its continual monitoring of physics in its Member States, the European Committee for Future Accelerators (ECFA) recently visited Sweden, where it met at the University of Lund in September. Physics in Sweden is flourishing, with both a long CERN tradition and excellent prospects for future collaboration. On the experimental side, about 80 researchers, including about 30 graduate students, out of a total of 110 (including 50 graduate students), concentrate on CERN for their work. The main centres of experimental activity are: Chalmers- Goteborg; Lund (particle physics and relativistic heavy ion groups), the Royal Institute of Technology - KTH - Stockholm, the University of Stockholm, and Uppsala. Engineering support staff in particle and highenergy nuclear physics number about 25. There is a strong Swedish participation (34 researchers from Lund, Stockholm, and Uppsala) in the Delphi experiment at LEP with a full commitment to higher energy running at LEP2, in the CP-LEAR experiment, JETSET studies at the LEAR low energy antiproton ring and in a LEAR hyperon experiment. Sweden is also well represented in CERN's extensive programme of nuclear and heavy ion physics, with 12 researchers active in the heavy ion programme, and a contingent in the SMC muon beam experiment. The strong Swedish interest in CERN's heavy ion programme was underlined by a special national contribution of 1.5M Swiss francs to the new lead ion injector. At lower energies, there is also good Swedish participation (mainly from the Chalmers Institute) in the Isolde online isotope separator. The national physics community has always appreciated CERN's diversified programmes and has greatly benefited as a result. For the future, there is an important involvement (some 40 physicists) in the ATLAS experiment at CERN's LHC collider. Swedish groups have been active in 11 research and development project for LHC physics. Sweden's heavy ion activity will continue at the RHIC heavy ion collider being

  9. Sweden - Physics in Sweden

    International Nuclear Information System (INIS)

    Anon.

    1995-01-01

    In its continual monitoring of physics in its Member States, the European Committee for Future Accelerators (ECFA) recently visited Sweden, where it met at the University of Lund in September. Physics in Sweden is flourishing, with both a long CERN tradition and excellent prospects for future collaboration. On the experimental side, about 80 researchers, including about 30 graduate students, out of a total of 110 (including 50 graduate students), concentrate on CERN for their work. The main centres of experimental activity are: Chalmers- Goteborg; Lund (particle physics and relativistic heavy ion groups), the Royal Institute of Technology - KTH - Stockholm, the University of Stockholm, and Uppsala. Engineering support staff in particle and highenergy nuclear physics number about 25. There is a strong Swedish participation (34 researchers from Lund, Stockholm, and Uppsala) in the Delphi experiment at LEP with a full commitment to higher energy running at LEP2, in the CP-LEAR experiment, JETSET studies at the LEAR low energy antiproton ring and in a LEAR hyperon experiment. Sweden is also well represented in CERN's extensive programme of nuclear and heavy ion physics, with 12 researchers active in the heavy ion programme, and a contingent in the SMC muon beam experiment. The strong Swedish interest in CERN's heavy ion programme was underlined by a special national contribution of 1.5M Swiss francs to the new lead ion injector. At lower energies, there is also good Swedish participation (mainly from the Chalmers Institute) in the Isolde online isotope separator. The national physics community has always appreciated CERN's diversified programmes and has greatly benefited as a result. For the future, there is an important involvement (some 40 physicists) in the ATLAS experiment at CERN's LHC collider. Swedish groups have been active in 11 research and development project for LHC physics. Sweden's heavy ion activity will continue at the RHIC

  10. Compton profiles by inelastic ion-electron scattering

    International Nuclear Information System (INIS)

    Boeckl, H.; Bell, F.

    1983-01-01

    It is shown that Compton profiles (CP) can be measured by inelastic ion-electron scattering. Within the impulse approximation the binary-encounter peak (BEP) reflects the CP of the target atom whereas the electron-loss peak (ELP) is given by projectile CP's. Evaluation of experimental data reveals that inelastic ion-electron scattering might be a promising method to supply inelastic electron or photon scattering for the determination of target CP's. The measurement of projectile CP's is unique to ion scattering since one gains knowledge about wave-function effects because of the high excitation degree of fast heavy-ion projectiles

  11. Electron density profile measurements by microwave reflectometry on Tore Supra

    International Nuclear Information System (INIS)

    Clairet, F.; Paume, M.; Chareau, J.M.

    1995-01-01

    A proposal is presented developing reflectometry diagnostic for electron density profile measurements as routine diagnostic without manual intervention as achieved at JET. Since density fluctuations seriously perturb the reflected signal and the measurement of the group delay, a method is described to overcome the irrelevant results with the help of an adaptive filtering technique. Accurate profiles are estimated for about 70% of the shots. (author) 3 refs.; 6 figs

  12. Electronic properties and Compton profiles of silver iodide

    Indian Academy of Sciences (India)

    We have carried out an extensive study of electronic properties of silver iodide in - and -phases. The theoretical Compton profiles, energy bands, density of states and anisotropies in momentum densities are computed using density functional theories. We have also employed full-potential linearized augmented ...

  13. Behavior of the bottomside electron density profile over Pruhonice

    Czech Academy of Sciences Publication Activity Database

    Mosert, M.; Burešová, Dalia; Ezquer, R.; Mansilla, G.

    2004-01-01

    Roč. 34, č. 9 (2004), s. 1982-1989 ISSN 0273-1177 R&D Projects: GA AV ČR IAA3042102 Institutional research plan: CEZ:AV0Z3042911 Keywords : Electron density profiles * Variability Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 0.548, year: 2004

  14. Assessment of the waste electrical and electronic equipment management systems profile and sustainability in developed and developing European Union countries.

    Science.gov (United States)

    Ibanescu, Dumitrita; Cailean Gavrilescu, Daniela; Teodosiu, Carmen; Fiore, Silvia

    2018-03-01

    The assessment of waste management systems for electrical and electronic equipment (WEEE) from developed economies (Germany, Sweden and Italy) and developing countries (Romania and Bulgaria), is discussed covering the period 2007-2014. The WEEE management systems profiles are depicted by indicators correlated to WEEE life cycle stages: collection, transportation and treatment. The sustainability of national WEEE management systems in terms of greenhouse gas emissions is presented, together with the greenhouse gas efficiency indicator that underlines the efficiency of WEEE treatment options. In the countries comparisons, the key elements are: robust versus fragile economies, the overall waste management performance and the existence/development of suitable management practices on WEEE. Over the life cycle perspective, developed economies (Germany, Sweden and Italy) manage one order of magnitude higher quantities of WEEE compared to developing countries (Romania and Bulgaria). Although prevention and reduction measures are encouraged, all WEEE quantities were larger in 2013, than in 2007. In 2007-2014, developed economies exceed the annual European collection target of 4 kg WEEE/capita, while collection is still difficult in developing countries. If collection rates are estimated in relationship with products placed on market, than similar values are registered in Sweden and Bulgaria, followed by Germany and Italy and lastly Romania. WEEE transportation shows different patterns among countries, with Italy as the greatest exporter (in 2014), while Sweden treats the WEEE nationally. WEEE reuse is a common practice in Germany, Sweden (from 2009) and Bulgaria (from 2011). By 2014, recycling was the most preferred WEEE treatment option, with the same kind of rates performance, over 80%, irrespective of the country, with efforts in each of the countries in developing special collection points, recycling facilities and support instruments. The national total and the

  15. Ionization rates and profiles of electron concentration in Martian atmosphere

    International Nuclear Information System (INIS)

    Komitov, B.; Spasov, S.; Gogoshev, M.

    1981-01-01

    The ionization and vertical profiles of electron concentration in the Martian atmosphere are calculated as functions of the solar zenith angles varying from O deg to 90 deg. A neutral atmospheric model based on direct mass-spectometric measurements from the Viking-1 landing modul is employed in the calculation. The Earth data of the ionization solar flux at the same level of the solar activity and for the month of the Viking-1 measurements reduced for the Mars orbit are used. The numerical result for the photoionization rates and quasi-equilibrium electron-concentration profiles in the upper Martian atmosphere at different solar zenith angles from 0 deg to 100 deg are presented. It is shown that the maxima of both quantities decrease and move towards the upper atmosphere regions. The calculated electron density at the zenith solar angle of 40 deg are compared to Viking-1 experimental data and a good agreement is achieved

  16. Ion transition heights from topside electron density profiles

    International Nuclear Information System (INIS)

    Titheridge, J.E.

    1976-01-01

    Theoretical electron density profiles are calculated for the topside ionosphere to determine the major factors controlling the profile shape. Only the mean temperature, the vertical temperature gradient and the O + /H + ion transition height are important. Vertical proton fluxes alter the ion transition height but have no other effect on the profile shape. Diffusive equilibrium profiles including only these three effects fit observed profiles, at all latitudes, to within experimental accuracy. Values of plasma temperature, temperature gradient and ion transition height hsub(T) were determined by fitting theoretical models to 60,000 experimental profiles obtained from Alouette 1 ionograms, at latitudes of 75 0 S to 85 0 N near solar minimum. Inside the plasmasphere hsub(T) varies from about 500 km on winter nights to 850 km on summer days. Diurnal variations are caused primarily by the production and loss of O + in the ionosphere. The approximately constant winter night value of hsub(T) is close to the level for chemical equilibrium. In summer hsub(T) is always above the equilibrium level, giving a continual production of protons which travel along lines of force to aid in maintaining the conjugate winter night ionosphere. Outside the plasmasphere hsub(T) is 300 to 600 km above the equilibrium level at all times. This implies a continual near-limiting upwards flux of protons which persists down to latitudes of about 60 0 at night and 50 0 during the day. (author)

  17. Plasma density profiles and finite bandwidth effects on electron heating

    International Nuclear Information System (INIS)

    Spielman, R.B.; Mizuno, K.; DeGroot, J.S.; Bollen, W.M.; Woo, W.

    1980-01-01

    Intense, p-polarized microwaves are incident on an inhomogeneous plasma in a cylindrical waveguide. Microwaves are mainly absorbed by resonant absorption near the critical surface (where the plasma frequency, ω/sub pe/, equals the microwave frequency, ω/sub o/). The localized plasma waves strongly modify the plasma density. Step-plateau density profiles or a cavity are created depending on the plasma flow speed. Hot electron production is strongly affected by the microwave bandwidth. The hot electron temperature varies as T/sub H/ is proportional to (Δ ω/ω) -0 25 . As the hot electron temperature decreases with increasing driver bandwidth, the hot electron density increases. This increase is such that the heat flux into the overdense region (Q is proportional to eta/sub H/T/sub H/ 3 2 ) is nearly constant

  18. An Electron-Beam Profile Monitor Using Fresnel Zone Plates

    International Nuclear Information System (INIS)

    Nakamura, Norio; Sakai, Hiroshi; Iida, Kensuke; Shinoe, Kenji; Takaki, Hiroyuki; Fujisawa, Masami; Hayano, Hitoshi; Muto, Toshiya; Nomura, Masaharu; Kamiya, Yukihide; Koseki, Tadashi; Amemiya, Yoshiyuki; Aoki, Nobutada; Nakayama, Koichi

    2004-01-01

    We have developed a beam profile monitor using two Fresnel zone plates (FZPs) at the KEK-ATF (Accelerator Test Facility) damping ring to measure small electron-beam sizes for low-emittance synchrotron radiation sources. The monitor has a structure of an X-ray microscope, where two FZPs constitute an X-ray imaging optics. In the monitor system, the synchrotron radiation from the electron beam at the bending magnet is monochromatized to 3.235-keV X-rays by a crystal monochromator and the transverse electron-beam image is twenty-times magnified by the two FZPs and detected on an X-ray CCD camera. This monitor has the following advantages: (1) high spatial resolution, (2) non-destructive measurement, (3) real-time monitoring, and (4) direct electron-beam imaging. With the beam profile monitor, we have succeeded in obtaining a clear electron-beam image and measuring the extremely small beam size less than 10 μm. The measured magnification of the imaging optics was in good agreement with the design value

  19. Chloride ingress profiles measured by electron probe micro analysis

    DEFF Research Database (Denmark)

    Jensen, Ole mejlhede; Coats, Alison M.; Glasser, Fred P.

    1996-01-01

    Traditional techniques for measuring chloride ingress profiles do not apply well to high performance cement paste systems; the geometric resolution of the traditional measuring techniques is too low. In this paper measurements by Electron Probe Micro Analysis (EPMA) are presented. EPMA is demonst......Traditional techniques for measuring chloride ingress profiles do not apply well to high performance cement paste systems; the geometric resolution of the traditional measuring techniques is too low. In this paper measurements by Electron Probe Micro Analysis (EPMA) are presented. EPMA...... is demonstated to determine chloride ingress in cement paste on a micrometer scale. Potential chloride ingress routes such as cracks or the paste-aggregate interface may also be characterized by EPMA. Copyright (C) 1996 Elsevier Science Ltd...

  20. Current profile reconstruction using electron temperature imaging diagnostics

    International Nuclear Information System (INIS)

    Tritz, K.; Stutman, D.; Delgado-Aparicio, L.F.; Finkenthal, M.; Pacella, D.; Kaita, R.; Stratton, B.; Sabbagh, S.

    2004-01-01

    Flux surface shape information can be used to constrain the current profile for reconstruction of the plasma equilibrium. One method of inferring flux surface shape relies on plasma x-ray emission; however, deviations from the flux surfaces due to impurity and density asymmetries complicate the interpretation. Electron isotherm surfaces should correspond well to the plasma flux surfaces, and equilibrium constraint modeling using this isotherm information constrains the current profile. The KFIT code is used to assess the profile uncertainty and to optimize the number, location and SNR required for the Te detectors. As Te imaging detectors we consider tangentially viewing, vertically spaced, linear gas electron multiplier arrays operated in pulse height analysis (PHA) mode and multifoil soft x-ray arrays. Isoflux coordinate sets provided by T e measurements offer a strong constraint on the equilibrium reconstruction in both a stacked horizontal array configuration and a crossed horizontal and vertical beam system, with q 0 determined to within ±4%. The required SNR can be provided with either PHA or multicolor diagnostic techniques, though the multicolor system requires ∼x4 better statistics for comparable final errors

  1. Analysis of Total Electron Content and Electron Density Profile during Different Geomagnetic Storms

    Science.gov (United States)

    Chapagain, N. P.; Rana, B.; Adhikari, B.

    2017-12-01

    Total Electron content (TEC) and electron density are the key parameters in the mitigation of ionospheric effects on radio communication system. Detail study of the TEC and electron density variations has been carried out during geomagnetic storms, with longitude and latitude, for four different locations: (13˚N -17˚N, 88˚E -98˚E), (30˚N-50˚N, 120˚W -95˚W), (29˚S-26˚S, 167˚W-163˚W,) and (60˚S-45˚S, 120˚W-105˚W) using the Gravity Recovery and Climate Experiment (GRACE) satellite observations. In order to find the geomagnetic activity, the solar wind parameters such as north-south component of inter planetary magnetic field (Bz), plasma drift velocity (Vsw), flow pressure (nPa), AE, Dst and Kp indices were obtained from Operating Mission as Nodes on the Internet (OMNI) web system. The data for geomagnetic indices have been correlated with the TEC and electron density for four different events of geomagnetic storms on 6 April 2008, 27 March 2008, 4 September 2008, and 11 October 2008. The result illustrates that the observed TEC and electron density profile significantly vary with longitudes and latitudes. This study illustrates that the values of TEC and the vertical electron density profile are influenced by the solar wind parameters associated with solar activities. The peak values of electron density and TEC increase as the geomagnetic storms become stronger. Similarly, the electron density profile varies with altitudes, which peaks around the altitude range of about 250- 350 km, depending on the strength of geomagnetic storms. The results clearly show that the peak electron density shifted to higher altitude (from about 250 km to 350 km) as the geomagnetic disturbances becomes stronger.

  2. Automated Processing of ISIS Topside Ionograms into Electron Density Profiles

    Science.gov (United States)

    Reinisch, bodo W.; Huang, Xueqin; Bilitza, Dieter; Hills, H. Kent

    2004-01-01

    Modeling of the topside ionosphere has for the most part relied on just a few years of data from topside sounder satellites. The widely used Bent et al. (1972) model, for example, is based on only 50,000 Alouette 1 profiles. The International Reference Ionosphere (IRI) (Bilitza, 1990, 2001) uses an analytical description of the graphs and tables provided by Bent et al. (1972). The Alouette 1, 2 and ISIS 1, 2 topside sounder satellites of the sixties and seventies were ahead of their times in terms of the sheer volume of data obtained and in terms of the computer and software requirements for data analysis. As a result, only a small percentage of the collected topside ionograms was converted into electron density profiles. Recently, a NASA-funded data restoration project has undertaken and is continuing the process of digitizing the Alouette/ISIS ionograms from the analog 7-track tapes. Our project involves the automated processing of these digital ionograms into electron density profiles. The project accomplished a set of important goals that will have a major impact on understanding and modeling of the topside ionosphere: (1) The TOPside Ionogram Scaling and True height inversion (TOPIST) software was developed for the automated scaling and inversion of topside ionograms. (2) The TOPIST software was applied to the over 300,000 ISIS-2 topside ionograms that had been digitized in the fkamework of a separate AISRP project (PI: R.F. Benson). (3) The new TOPIST-produced database of global electron density profiles for the topside ionosphere were made publicly available through NASA s National Space Science Data Center (NSSDC) ftp archive at . (4) Earlier Alouette 1,2 and ISIS 1, 2 data sets of electron density profiles from manual scaling of selected sets of ionograms were converted fiom a highly-compressed binary format into a user-friendly ASCII format and made publicly available through nssdcftp.gsfc.nasa.gov. The new database for the topside ionosphere established

  3. [Prevalence and user profile of electronic cigarettes in Spain (2014)].

    Science.gov (United States)

    Lidón-Moyano, Cristina; Martínez-Sánchez, Jose M; Fu, Marcela; Ballbè, Montse; Martín-Sánchez, Juan Carlos; Fernández, Esteve

    To describe the prevalence and user profile of electronic cigarettes among Spanish adults and evaluate the potential dual use of these devices with combustible or conventional tobacco in 2014 in Spain. Cross-sectional study of a representative sample of the Spanish adult (16-75 years old) population (n=1,016). A computer-assisted telephone survey was conducted in 2014. The prevalence and 95% confidence intervals (95% CI) for the use of electronic cigarettes stratified by gender, age, tobacco consumption and social status were calculated. The sample was weighted and a logistic regression model adjusted to obtain the crude odds ratios (OR) adjusted by gender, age and social status. 10.3% (95% CI: 8.6-12.4) of the Spanish adult population stated being ever users of electronic cigarettes (2% current users, 3.2% past users and 5.1% experimental users). Among current electronic cigarette users, 57.2% also smoked combustible or conventional tobacco, 28% had never smoked and 14.8% were former smokers. The prevalence of electronic cigarette use was higher in the younger population (adjusted OR=23.8; 95% CI: 2.5-227.7) and smokers of combustible tobacco (adjusted OR=10.1; 95% CI: 5.8-17.5). The use of electronic cigarettes in Spain is scarce and is most prevalent among young people and tobacco smokers. Nevertheless, one out of four current electronic cigarette users have never smoked. Hence, the regulation of these devices should be reinforced to avoid a possible gateway to nicotine products among never smokers. Copyright © 2016 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

  4. An Electron Beam Profile Instrument Based on FBGs

    Directory of Open Access Journals (Sweden)

    Dan Sporea

    2014-08-01

    Full Text Available Along with the dose rate and the total irradiation dose measurements, the knowledge of the beam localization and the beam profile/energy distribution in the beam are parameters of interest for charged particle accelerator installations when they are used in scientific investigations, industrial applications or medical treatments. The transverse profile of the beam, its position, its centroid location, and its focus or flatness depend on the instrument operating conditions or on the beam exit setup. Proof-of-concept of a new type of charged particle beam diagnostics based on fiber Bragg gratings (FBGs was demonstrated. Its operating principle relies on the measurement of the peak wavelength changes for an array of FBG sensors as function of the temperature following the exposure to an electron beam. Periodically, the sensor irradiation is stopped and the FBG are force cooled to a reference temperature with which the temperature influencing each sensor during beam exposure is compared. Commercially available FBGs, and FBGs written in radiation resistant optical fibers, were tested under electron beam irradiation in order to study their possible use in this application.

  5. Dopant profiling based on scanning electron and helium ion microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Chee, Augustus K.W., E-mail: kwac2@cam.ac.uk [Centre for Advanced Photonics and Electronics, Electrical Engineering Division, Department of Engineering, University of Cambridge, 9 JJ Thomson Avenue, Cambridge CB3 0FA (United Kingdom); Boden, Stuart A. [University of Southampton, Electronics and Computer Science, Highfield, Southampton SO17 1BJ (United Kingdom)

    2016-02-15

    In this paper, we evaluate and compare doping contrast generated inside the scanning electron microscope (SEM) and scanning helium ion microscope (SHIM). Specialised energy-filtering techniques are often required to produce strong doping contrast to map donor distributions using the secondary electron (SE) signal in the SEM. However, strong doping contrast can be obtained from n-type regions in the SHIM, even without energy-filtering. This SHIM technique is more sensitive than the SEM to donor density changes above its sensitivity threshold, i.e. of the order of 10{sup 16} or 10{sup 17} donors cm{sup −3} respectively on specimens with or without a p–n junction; its sensitivity limit is well above 2×10{sup 17} acceptors cm{sup −3} on specimens with or without a p–n junction. Good correlation is found between the widths and slopes of experimentally measured doping contrast profiles of thin p-layers and the calculated widths and slopes of the potential energy distributions across these layers, at a depth of 1 to 3 nm and 5 to 10 nm below the surface in the SHIM and the SEM respectively. This is consistent with the mean escape depth of SEs in silicon being about 1.8 nm and 7 nm in the SHIM and SEM respectively, and we conclude that short escape depth, low energy SE signals are most suitable for donor profiling. - Highlights: • Strong doping contrast from n-type regions in the SHIM without energy-filtering. • Sensitivity limits are established of the SHIM and SEM techniques. • We discuss the impact of SHIM imaging conditions on quantitative dopant profiling. • Doping contrast stems from different surface layer thicknesses in the SHIM and SEM.

  6. Electron beam based transversal profile measurements of intense ion beams

    International Nuclear Information System (INIS)

    El Moussati, Said

    2014-01-01

    A non-invasive diagnostic method for the experimental determination of the transverse profile of an intense ion beam has been developed and investigated theoretically as well as experimentally within the framework of the present work. The method is based on the deflection of electrons when passing the electromagnetic field of an ion beam. To achieve this an electron beam is employed with a specifically prepared transversal profile. This distinguish this method from similar ones which use thin electron beams for scanning the electromagnetic field [Roy et al. 2005; Blockland10]. The diagnostic method presented in this work will be subsequently called ''Electron-Beam-Imaging'' (EBI). First of all the influence of the electromagnetic field of the ion beam on the electrons has been theoretically analyzed. It was found that the magnetic field causes only a shift of the electrons along the ion beam axis, while the electric field only causes a shift in a plane transverse to the ion beam. Moreover, in the non-relativistic case the magnetic force is significantly smaller than the Coulomb one and the electrons suffer due to the magnetic field just a shift and continue to move parallel to their initial trajectory. Under the influence of the electric field, the electrons move away from the ion beam axis, their resulting trajectory shows a specific angle compared to the original direction. This deflection angle practically depends just on the electric field of the ion beam. Thus the magnetic field has been neglected when analysing the experimental data. The theoretical model provides a relationship between the deflection angle of the electrons and the charge distribution in the cross section of the ion beam. The model however only can be applied for small deflection angles. This implies a relationship between the line-charge density of the ion beam and the initial kinetic energy of the electrons. Numerical investigations have been carried out to clarify the

  7. Construction of a high resolution electron beam profile monitor

    International Nuclear Information System (INIS)

    Norem, J.; Dawson, J.; Haberichter, W.; Novak, W.; Reed, L.; Yang, X.F.

    1993-01-01

    Bremsstrahlung from an electron beam on a heavy target can be used to image the beam profile using collimators and slits. The limiting resolution using this system is determined by Fresnel diffraction, and is ∼ √(λd/2), where λ is the photon wavelength and d is determined by the linear dimensions of the system. For linear colliders this resolution could be a few nm. The highest resolution requires detectors which see only high energy, (small λ), photons, and this is accomplished by converting photons to pairs, and detecting Cherenkov light in a nearly forward angle with a CCD detector or streak camera. Tests are planned at the Argonne APS and SLAC FFTB

  8. The use of gold markers and electronic portal imaging for radiotherapy verification in prostate cancer patients: Sweden Ghana Medical Centre experience

    Directory of Open Access Journals (Sweden)

    George Felix Acquah

    2014-02-01

    Full Text Available The success of radiotherapy cancer treatment delivery depends on the accuracy of patient setup for each fraction. A significant problem arises from reproducing the same patient position and prostate location during treatment planning for every fraction of the treatment process. To analyze the daily movements of the prostate, gold markers are implanted in the prostate and portal images taken and manually matched with reference images to locate the prostate. Geometrical and fiducial markers are annotated onto a highly quality generated digitally reconstructed radiographs, that are compared with portal images acquired right before treatment dose delivery. A 0 and 270 degree treatment fields are used to calculate prostate shifts for all prostate cancer patients undergoing treatment at the Sweden Ghana Medical Centre, using an iViewGT portal imaging device. After aligning of the marker positions onto the reference images, the set-up deviations corrections are displayed and an on-line correction procedure applied. The measured migrations of the prostate markers are below the threshold of 3 mm for the main plans and 2 mm for the boost plans. With daily electronic portal imaging combined with gold markers, provides an objective method for verifying and correcting the position of the prostate immediately prior to radiation delivery.--------------------------------------------Cite this article as: Acquah GF. The use of gold markers and electronic portal imaging for radiotherapy verification in prostate cancer patients: Sweden Ghana Medical Centre experience. Int J Cancer Ther Oncol 2014; 2(1:020112.DOI: http://dx.doi.org/10.14319/ijcto.0201.12

  9. Sweden's help

    International Nuclear Information System (INIS)

    1969-01-01

    The Government of Sweden has decided to provide funds for the Agency to use for agreed projects in developing countries, and the Board of Governors has authorized the Director General to conclude an agreement to bring the scheme into effect. The Agency will administer the funds and will select and process requests to be considered for their use; it will also be responsible for project supervision and control. Responsibility for implementing the agreement on behalf of the Swedish Government is entrusted to the Swedish International Development Authority (SIDA) which functions under the auspices of the Ministry of Foreign Affairs and administers Swedish bilateral technical, financial and humanitarian assistance. SIDA has already provided, or has agreed to provide, assistance for a number of Agency technical co-operation programmes and for the International Centre for Theoretical Physics in Trieste. (author)

  10. Electronic cigarette: users profile, utilization, satisfaction and perceived efficacy.

    Science.gov (United States)

    Etter, Jean-François; Bullen, Chris

    2011-11-01

    To assess the profile, utilization patterns, satisfaction and perceived effects among users of electronic cigarettes ('e-cigarettes'). Internet survey in English and French in 2010. Online questionnaire. Visitors of websites and online discussion forums dedicated to e-cigarettes and to smoking cessation. There were 3587 participants (70% former tobacco smokers, 61% men, mean age 41 years). The median duration of electronic cigarette use was 3 months, users drew 120 puffs/day and used five refills/day. Almost all (97%) used e-cigarettes containing nicotine. Daily users spent $33 per month on these products. Most (96%) said the e-cigarette helped them to quit smoking or reduce their smoking (92%). Reasons for using the e-cigarette included the perception that it was less toxic than tobacco (84%), to deal with craving for tobacco (79%) and withdrawal symptoms (67%), to quit smoking or avoid relapsing (77%), because it was cheaper than smoking (57%) and to deal with situations where smoking was prohibited (39%). Most ex-smokers (79%) feared they might relapse to smoking if they stopped using the e-cigarette. Users of nicotine-containing e-cigarettes reported better relief of withdrawal and a greater effect on smoking cessation than those using non-nicotine e-cigarettes. E-cigarettes were used much as people would use nicotine replacement medications: by former smokers to avoid relapse or as an aid to cut down or quit smoking. Further research should evaluate the safety and efficacy of e-cigarettes for administration of nicotine and other substances, and for quitting and relapse prevention. © 2011 The Authors, Addiction © 2011 Society for the Study of Addiction.

  11. Electron cyclotron heating for current profile control of non-circular plasmas

    International Nuclear Information System (INIS)

    Chan, V.S.; Davidson, R.; Guest, G.; Hacker, M.; Miller, L.

    1981-01-01

    Electron Cyclotron Heating (ECH) offers a promising approach to modifying the radial profiles of electron temperature and plasma current in tokamaks to increase the ideal MHD beta limits and permit experimental access to particular noncircular cross-section tokamaks that cannot be achieved with the peaked current profiles characteristic of ohmically heated tokamaks. We use a one-and-one-half-dimensional, time-dependent transport model that incorporates a self-consistent model of electron cyclotron power absorption to study the temporal evolution of electron temperature and plasma current profiles and the resulting noncircular equilibria. Startup scenarios for high-beta dees and doublets are investigated with this transport modeling

  12. Data description and quality assessment of ionospheric electron density profiles for ARPA modeling project. Technical report

    International Nuclear Information System (INIS)

    Conkright, R.O.

    1977-03-01

    This report presents a description of the automated method used to produce electron density (N(h)) profiles from ionograms recorded on 35mm film and an assessment of the resulting data base. A large data base of about 30,000 profiles was required for an ionospheric modeling project. This motivated a search for an automated method of producing profiles. The automated method used is fully described, the resulting data are given a quality grade, and the noon and midnight profiles are presented. Selected portions of this data base are compared with profiles produced by the standard profiling method in use by the Environmental Data Service at Boulder, Colorado

  13. Experiences of Healthcare Professionals to the Introduction in Sweden of a Public eHealth Service: Patients' Online Access to their Electronic Health Records.

    Science.gov (United States)

    Ålander, Ture; Scandurra, Isabella

    2015-01-01

    Patients' increasing demands for medical information, the digitization of health records and the fast spread of Internet access form a basis of introducing new eHealth services. An international trend is to provide access for patients to health information of various kind. In Sweden, access by patients to their proper electronic health record (EHR) has been provided in a pilot county since November 2012. This eHealth service is controversial and criticism has arised from the clinical professions, mainly physicians. Two web surveys were conducted to discover whether the opinions of healthcare professionals differ; between staff that have had experience with patients accessing their own EHR and those who have no such expericence. Experienced nurses found the EHR more important for the patients and a better reform, compared to unexperienced nurses in the rest of the country. Similarly, physicians with their own experience had a more positive attitude compared to non-experienced physicians. The conclusion of this study is that healthcare professionals must be involved in the implementation of public eHealth services such as EHRs and that real experiences of the professionals should be better disseminated to their inexperienced peers.

  14. Influence of an imperfect energy profile on a seeded free electron laser performance

    Directory of Open Access Journals (Sweden)

    Botao Jia

    2010-06-01

    Full Text Available A single-pass high-gain x-ray free electron laser (FEL calls for a high quality electron bunch. In particular, for a seeded FEL amplifier and for a harmonic generation FEL, the electron bunch initial energy profile uniformity is crucial for generating an FEL with a narrow bandwidth. After the acceleration, compression, and transportation, the electron bunch energy profile entering the undulator can acquire temporal nonuniformity. We study the influence of the electron bunch initial energy profile nonuniformity on the FEL performance. Intrinsically, for a harmonic generation FEL, the harmonic generation FEL in the final radiator starts with an electron bunch having energy modulation acquired in the previous stages, due to the FEL interaction at those FEL wavelengths and their harmonics. The influence of this electron bunch energy nonuniformity on the harmonic generation FEL in the final radiator is then studied.

  15. Equatorial bottom and topside electron density profiles and comparison with IRI

    International Nuclear Information System (INIS)

    Reinisch, B.W.; Huang, X.; Conway, J.; Komjathy, A.

    2001-01-01

    A new technique of estimating the ionospheric topside profile from the information contained in the groundbased ionograms is described. The electron density profile above the F2 layer peak is approximated by an α-Chapman function with a constant scale height that is derived from the bottomside profile shape near the F2 peak. The scale height is obtained from the bottomside profile by representing the latter in terms of α-Chapman functions with scale heights H(h) that vary as a function of height. The scale height at the layer peak is then used for the topside profile. The bottomside and topside electron contents is obtained by integrating the electron density from h=0 to hmF2 and from hmF2 to ∞. The ionogram derived electron content values for Jicamarca in 1998 are compared with the respective IRI values. (author)

  16. Electronic structure of hafnium: A Compton profile study

    Indian Academy of Sciences (India)

    To extract the true Compton profile from the raw data, the raw data were cor- rected for ... For the present sample and experimental conditions, the contribution of .... are in better agreement with the simple renormalized free atom calculations for.

  17. Renewable Energy Policy Fact sheet - Sweden

    International Nuclear Information System (INIS)

    2017-09-01

    The EurObserv'ER policy profiles give a snapshot of the renewable energy policy in the EU Member States. Sweden surpassed its 2020 nationally binding renewable energy in 2013. Main support measures to promote renewable energy in Sweden consists of a quota system, various tax regulation mechanisms and subsidy schemes. Sweden has a joint support scheme with Norway, thus being the first EU Member State to implement a cooperation mechanism, as defined under the 2009 EU Renewable Energy Directive. The Swedish coalition government has agreed on a target of 100% renewable electricity production by 2040

  18. Policing football in Sweden

    DEFF Research Database (Denmark)

    Stott, Clifford; Havelund, Jonas; Lundberg, Filip

    2016-01-01

    of football policing in Sweden. Central to these is the empowerment and coordination of dialogue based approaches to the policing of football supporters in Sweden. The report points out that this is an area of crowd policing where Sweden are global leaders having influenced how policing is conducted in other...

  19. Technological guns which form the profiled electron beans

    International Nuclear Information System (INIS)

    Mel'nik, V.I.

    1998-01-01

    Electron guns with high-voltage glow discharge are developed which form disc - and tubule-like,hollow conic and linear electron beams,as well as devices and systems for control of gun parameter and technological processes in low and intermediate vacuum

  20. Measurement of electron density profiles by soft X-ray tomography on the RTP tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, D.F. da; Donne, A.J.H.; Lyadina, E.S.; Rutteman, R.H.; Tanzi, C.P. [FOM-Instituut voor Plasmafysica, Rijnhuizen (Netherlands)

    1993-12-31

    Tomographic diagnosis of the soft x-ray emissivity profile is a powerful method for studying several plasma parameters. The x-ray emissivity is a complicated function of plasma quantities like the electron density and temperature, and the impurity content in the plasma. These quantities can be studied separately provided that information is available on the remaining parameters. Soft x-ray emissivity profiles have already been used successfully in other machines to determine local values of impurity densities and the effective charge Z{sub eff}. In the RTP tokamak the electron density profile has been inferred from a modelling of the x-ray emissivity in situations where information is available on the electron temperature profile, the value of Z{sub eff}, and the relative proportion of the impurities. The method can be useful for the study of hollow density profiles that cannot be properly reconstructed by Abel inversion of interferometer or reflectometer data. (author) 7 refs., 2 figs.

  1. Measurement of electron density profiles by soft X-ray tomography on the RTP tokamak

    International Nuclear Information System (INIS)

    Cruz, D.F. da; Donne, A.J.H.; Lyadina, E.S.; Rutteman, R.H.; Tanzi, C.P.

    1993-01-01

    Tomographic diagnosis of the soft x-ray emissivity profile is a powerful method for studying several plasma parameters. The x-ray emissivity is a complicated function of plasma quantities like the electron density and temperature, and the impurity content in the plasma. These quantities can be studied separately provided that information is available on the remaining parameters. Soft x-ray emissivity profiles have already been used successfully in other machines to determine local values of impurity densities and the effective charge Z eff . In the RTP tokamak the electron density profile has been inferred from a modelling of the x-ray emissivity in situations where information is available on the electron temperature profile, the value of Z eff , and the relative proportion of the impurities. The method can be useful for the study of hollow density profiles that cannot be properly reconstructed by Abel inversion of interferometer or reflectometer data. (author) 7 refs., 2 figs

  2. Measurements of electron density profiles using an angular filter refractometer

    International Nuclear Information System (INIS)

    Haberberger, D.; Ivancic, S.; Hu, S. X.; Boni, R.; Barczys, M.; Craxton, R. S.; Froula, D. H.

    2014-01-01

    A novel diagnostic technique, angular filter refractometry (AFR), has been developed to characterize high-density, long-scale-length plasmas relevant to high-energy-density physics experiments. AFR measures plasma densities up to 10 21  cm −3 with a 263-nm probe laser and is used to study the plasma expansion from CH foil and spherical targets that are irradiated with ∼9 kJ of ultraviolet (351-nm) laser energy in a 2-ns pulse. The data elucidate the temporal evolution of the plasma profile for the CH planar targets and the dependence of the plasma profile on target radius for CH spheres

  3. Measurements of electron density profiles using an angular filter refractometer

    Energy Technology Data Exchange (ETDEWEB)

    Haberberger, D., E-mail: dhab@lle.rochester.edu; Ivancic, S.; Hu, S. X.; Boni, R.; Barczys, M.; Craxton, R. S.; Froula, D. H. [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14636 (United States)

    2014-05-15

    A novel diagnostic technique, angular filter refractometry (AFR), has been developed to characterize high-density, long-scale-length plasmas relevant to high-energy-density physics experiments. AFR measures plasma densities up to 10{sup 21} cm{sup −3} with a 263-nm probe laser and is used to study the plasma expansion from CH foil and spherical targets that are irradiated with ∼9 kJ of ultraviolet (351-nm) laser energy in a 2-ns pulse. The data elucidate the temporal evolution of the plasma profile for the CH planar targets and the dependence of the plasma profile on target radius for CH spheres.

  4. Moving gantry method for electron beam dose profile measurement at extended source-to-surface distances.

    Science.gov (United States)

    Fekete, Gábor; Fodor, Emese; Pesznyák, Csilla

    2015-03-08

    A novel method has been put forward for very large electron beam profile measurement. With this method, absorbed dose profiles can be measured at any depth in a solid phantom for total skin electron therapy. Electron beam dose profiles were collected with two different methods. Profile measurements were performed at 0.2 and 1.2 cm depths with a parallel plate and a thimble chamber, respectively. 108cm × 108 cm and 45 cm × 45 cm projected size electron beams were scanned by vertically moving phantom and detector at 300 cm source-to-surface distance with 90° and 270° gantry angles. The profiles collected this way were used as reference. Afterwards, the phantom was fixed on the central axis and the gantry was rotated with certain angular steps. After applying correction for the different source-to-detector distances and incidence of angle, the profiles measured in the two different setups were compared. Correction formalism has been developed. The agreement between the cross profiles taken at the depth of maximum dose with the 'classical' scanning and with the new moving gantry method was better than 0.5 % in the measuring range from zero to 71.9 cm. Inverse square and attenuation corrections had to be applied. The profiles measured with the parallel plate chamber agree better than 1%, except for the penumbra region, where the maximum difference is 1.5%. With the moving gantry method, very large electron field profiles can be measured at any depth in a solid phantom with high accuracy and reproducibility and with much less time per step. No special instrumentation is needed. The method can be used for commissioning of very large electron beams for computer-assisted treatment planning, for designing beam modifiers to improve dose uniformity, and for verification of computed dose profiles.

  5. Fast electron current density profile and diffusion studies during LHCD in PBX-M

    International Nuclear Information System (INIS)

    Jones, S.E.; Kesner, J.; Luckhardt, S.; Paoletti, F.

    1993-08-01

    Successful current profile control experiments using lower hybrid current drive (LCHD) clearly require knowledge of (1) the location of the driven fast electrons and (2) the ability to maintain that location from spreading due to radial diffusion. These issues can be addressed by examining the data from the hard x-ray camera on PBX-M, a unique diagnostic producing two-dimensional, time resolved tangential images of fast electron bremsstrahlung. Using modeling, these line-of-sight images are inverted to extract a radial fast electron current density profile. We note that ''hollow'' profiles have been observed, indicative of off-axis current drive. These profiles can then be used to calculate an upper bound for an effective fast electron diffusion constant: assuming an extremely radially narrow lower hybrid absorption profile and a transport model based on Rax and Moreau, a model fast electron current density profile is calculated and compared to the experimentally derived profile. The model diffusion constant is adjusted until a good match is found. Applied to steady-state quiescent modes on PBX-M, we obtain an upper limit for an effective diffusion constant of about D*=1.1 m 2 /sec

  6. Determination of Jupiter's electron density profile from plasma wave observations

    International Nuclear Information System (INIS)

    Gurnett, D.A.; Scarf, F.L.; Kurth, W.S.; Shaw, R.R.; Poynter, R.L.

    1981-01-01

    This paper summarizes the electron density measurements obtained in the Jovian magnetosphere from the plasma wave instruments on the Voyager 1 and 2 spacecraft. Three basic techniques are discussed for determining the electron density: (1) local measurements from the low-frequency cutoff of continuum radiation, (2) local measurements from the frequency of upper hybrid resonance emissions, and (3) integral measurements from the dispersion of whistlers. The limitations and advantages of each technique are critically reviewed. In all cases the electron densities are unaffected by spacecraft charging or sheath effects, which makes these measurements of particular importance for verifying in situ plasma and low-energy charged particle measurments. In the outer regions of the dayside magnetosphere, beyond about 40 R/sub J/, the electron densities range from about 3 x 10 -3 to 3 x 10 -2 cm -3 . On Voyager 2, several brief excursions apparently occurred into the low-density region north of the plasma sheet with densities less than 10 -3 cm -3 . Approaching the planet the electron density gradually increases, with the plasma frequency extending above the frequency range of the plasma wave instrument (56 kHz, or about 38 electrons cm -3 ) inside of about 8 R/sub J/. Within the high-density region of the Io plasma torus, whistlers provide measurements of the north-south scale height of the plasma torus, with scale heights ranging from about 0.9 to 2.5 R/sub J/

  7. Estimation of edge electron temperature profiles via forward modelling of the electron cyclotron radiation transport at ASDEX Upgrade

    International Nuclear Information System (INIS)

    Rathgeber, S K; Barrera, L; Eich, T; Fischer, R; Suttrop, W; Wolfrum, E; Nold, B; Willensdorfer, M

    2013-01-01

    We present a method to obtain reliable edge profiles of the electron temperature by forward modelling of the electron cyclotron radiation transport. While for the core of ASDEX Upgrade plasmas, straightforward analysis of electron cyclotron intensity measurements based on the optically thick plasma approximation is usually justified, reasonable analysis of the steep and optically thin plasma edge needs to consider broadened emission and absorption profiles and radiation transport processes. This is carried out in the framework of integrated data analysis which applies Bayesian probability theory for joint analysis of the electron density and temperature with data of different interdependent and complementary diagnostics. By this means, electron cyclotron radiation intensity delivers highly spatially resolved electron temperature data for the plasma edge. In H-mode, the edge gradient of the electron temperature can be several times higher than the one of the radiation temperature. Furthermore, we are able to reproduce the ‘shine-through’ peak—the observation of increased radiation temperatures at frequencies resonant in the optically thin scrape-off layer. This phenomenon is caused by strongly down-shifted radiation of Maxwellian tail electrons located in the H-mode edge region and, therefore, contains valuable information about the electron temperature edge gradient. (paper)

  8. OTR profile measurement of a LINAC electron beam with portable ultra high-speed camera

    International Nuclear Information System (INIS)

    Mogi, T.; Nisiyama, S.; Tomioka, S.; Enoto, T.

    2004-01-01

    We have studied on and developed a portable ultra high-speed camera, and so applied to measurement of a LINAC electron beam. We measured spatial OTR profiles of a LINAC electron beam using this camera with temporal resolution 80ns. (author)

  9. Profile modification and hot electron temperature from resonant absorption at modest intensity

    International Nuclear Information System (INIS)

    Albritton, J.R.; Langdon, A.B.

    1980-01-01

    Resonant absorption is investigated in expanding plasmas. The momentum deposition associated with the ejection of hot electrons toward low density via wavebreaking readily exceeds that of the incident laser radiation and results in significant modification of the density profile at critical. New scaling of hot electron temperature with laser and plasma parameters is presented

  10. Taste profile characterization of white ginseng by electronic tongue ...

    African Journals Online (AJOL)

    Pg4) from white ginseng was checked using an electronic tongue. The bitterness and aftertaste-B of Pg3 were perceived as significantly higher than those of the other subfractions. The sourness of Pg2 had the highest rating compared to that of the other subfractions. The umami of Pg4 was higher than that of the other ...

  11. Electron temperature profiles in high power neutral-beam-heated TFTR [Tokamak Fusion Test Reactor] plasmas

    International Nuclear Information System (INIS)

    Taylor, G.; Grek, B.; Stauffer, F.J.; Goldston, R.J.; Fredrickson, E.D.; Wieland, R.M.; Zarnstorff, M.C.

    1987-09-01

    In 1986, the maximum neutral beam injection (NBI) power in the Tokamak Fusion Test Reactor (TFTR) was increased to 20 MW, with three beams co-parallel and one counter-parallel to I/sub p/. TFTR was operated over a wide range of plasma parameters; 2.5 19 19 m -3 . Data bases have been constructed with over 600 measured electron temperature profiles from multipoint TV Thomson scattering which span much of this parameter space. We have also examined electron temperature profile shapes from electron cyclotron emission at the fundamental ordinary mode and second harmonic extraordinary mode for a subset of these discharges. In the light of recent work on ''profile consistency'' we have analyzed these temperature profiles in the range 0.3 < (r/a) < 0.9 to determine if a profile shape exists which is insensitive to q/sub cyl/ and beam-heating profile. Data from both sides of the temperature profile [T/sub e/(R)] were mapped to magnetic flux surfaces [T/sub e/(r/a)]. Although T/sub e/(r/a), in the region where 0.3 < r/a < 0.9 was found to be slightly broader at lower q/sub cyl/, it was found to be remarkably insensitive to β/sub p/, to the fraction of NBI power injected co-parallel to I/sub p/, and to the heating profile going from peaked on axis, to hollow. 10 refs., 8 figs

  12. Electron momentum density and Compton profile by a semi-empirical approach

    Science.gov (United States)

    Aguiar, Julio C.; Mitnik, Darío; Di Rocco, Héctor O.

    2015-08-01

    Here we propose a semi-empirical approach to describe with good accuracy the electron momentum densities and Compton profiles for a wide range of pure crystalline metals. In the present approach, we use an experimental Compton profile to fit an analytical expression for the momentum densities of the valence electrons. This expression is similar to a Fermi-Dirac distribution function with two parameters, one of which coincides with the ground state kinetic energy of the free-electron gas and the other resembles the electron-electron interaction energy. In the proposed scheme conduction electrons are neither completely free nor completely bound to the atomic nucleus. This procedure allows us to include correlation effects. We tested the approach for all metals with Z=3-50 and showed the results for three representative elements: Li, Be and Al from high-resolution experiments.

  13. Experimental electron density profiles of the mid-latitude lower ionosphere and winter anomaly

    International Nuclear Information System (INIS)

    Rapoport, Z.Ts.; Sinel'nikov, V.M.

    1996-01-01

    Summarized measurements of high-latitude electron density profiles of N e lower ionosphere, obtained at M100B meteorological rockets by precision method of coherent frequencies during 1979-1990 at the Volgograd test site (φ = 48 deg 41' N; λ = 44 deg 21 E), are presented. The profiles obtained represent average values of electron density at various altitudes of lower ionosphere (h = 70-100 km) during night and day time hours in winter and non winter periods. Increased electron density values during daytime hours in winter are related to winter anomaly phenomenon. 36 refs.; 1 fig

  14. Electron density profiles in the background of LF absorption during Forbush-decrease and PSE

    International Nuclear Information System (INIS)

    Satori, G.

    1989-01-01

    Based on the simulation of different Forbush decrease and particle precipitation effects in the D region, electron density profiles in the mid-latitudes the ionospheric absorption of low frequency (LF) radio waves was determined. The absorption variations at different frequenceis are strongly affected by the shape of the electron density profile. A structure appears which sometimes resembles the letter S (in a sloping form). Both the height (around 70 to 72 km) and the depth of the local minimum in the electron density contribute to the computed absorption changes of various degree at different frequencies. In this way several observed special absorption events can be interpreted

  15. Comparative study of the electron density profiles in the compact torus plasma merging experiments

    International Nuclear Information System (INIS)

    Hayashiya, Hitoshi; Asaka, Takeo; Katsurai, Makoto

    2003-01-01

    Following two previous papers on the comparative studies of the electron density distributions for a single compact torus (CT) and a spherical tokamak (ST), and for the a single ST and a merged ST, a comparative study on the dynamics of the electron density profile and after the CT and ST plasma merging process was performed. The sharpness of the peak in the electron density profile around the mid-plane just after the merging of CT with a low safety factor (q value) such as RFP or spheromak is found to be related to the speed of the magnetic axis during the plasma merging process. It is also found that the electron density gradient near the plasma edge in a high q ST is larger than that of a low q CT. High q ST is found to be provided with the magnetic structure which is able to sustain a large thermal pressure by a strong j x B force. Despite these differences in the electron density profile between CT and ST during merging, the confinement characteristics evaluated from the number of electrons confined within the magnetic separatrix after the completion of the merging is almost similar between in the merging CT and in the merging ST. For all configurations, the electron density profiles after the completion of the merging are analogous to those of the corresponding single configuration produced without the merging process. (author)

  16. Country report: Sweden

    International Nuclear Information System (INIS)

    1993-01-01

    Sweden has twelve nuclear power reactors with a combined capacity of 9900 MW net electric power. According to a resolution passed by parliament in 1980, Sweden will terminate its use of nuclear power in the year 2010, at the latest. According to generally accepted guidelines, the spent nuclear fuel will be kept in interim storage for approximately 40 years after which, according to present plans, it will be deposited in geological formations in Sweden

  17. Cohort profile: The Swedish National Register of Urinary Bladder Cancer (SNRUBC) and the Bladder Cancer Data Base Sweden (BladderBaSe)

    Science.gov (United States)

    Häggström, Christel; Liedberg, Fredrik; Hagberg, Oskar; Aljabery, Firas; Ströck, Viveka; Hosseini, Abolfazl; Gårdmark, Truls; Sherif, Amir; Malmström, Per-Uno; Garmo, Hans; Jahnson, Staffan; Holmberg, Lars

    2017-01-01

    Purpose To monitor the quality of bladder cancer care, the Swedish National Register of Urinary Bladder Cancer (SNRUBC) was initiated in 1997. During 2015, in order to study trends in incidence, effects of treatment and survival of men and women with bladder cancer, we linked the SNRUBC to other national healthcare and demographic registers and constructed the Bladder Cancer Data Base Sweden (BladderBaSe). Participants The SNRUBC is a nationwide register with detailed information on 97% of bladder cancer cases in Sweden as compared with the Swedish Cancer Register. Participants in the SNRUBC have registered data on tumour characteristics at diagnosis, and for 98% of these treatment data have been captured. From 2009, the SNRUBC holds data on 88% of eligible participants for follow-up 5 years after diagnosis of non-muscle invasive bladder cancer, and from 2011, data on surgery details and complications for 85% of participants treated with radical cystectomy. The BladderBaSe includes all data in the SNRUBC from 1997 to 2014, and additional covariates and follow-up data from linked national register sources on comorbidity, socioeconomic factors, detailed information on readmissions and treatment side effects, and causes of death. Findings to date Studies based on data in the SNRUBC have shown inequalities in survival and treatment indication by gender, regions and hospital volume. The BladderBaSe includes 38 658 participants registered in SNRUBC with bladder cancer diagnosed from 1 January 1997 to 31 December 2014. The BladderBaSe initiators are currently in collaboration with researchers from the SNRUBC investigating different aspects of bladder cancer survival. Future plans The SNRUBC and the BladderBaSe project are open for collaborations with national and international research teams. Collaborators can submit proposals for studies and study files can be uploaded to servers for remote access and analysis. For more information, please contact the corresponding

  18. Temperature profiles on the gadolinium surface during electron beam evaporation

    Energy Technology Data Exchange (ETDEWEB)

    Ohba, Hironori; Shibata, Takemasa [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1995-03-01

    The distributions of surface temperature of gadolinium in a water-cooled copper crucible during electron beam evaporation were measured by optical pyrometry. The surface temperatures were obtained from the radiation intensity ratio of the evaporating surface and a reference light source using Planck`s law of radiation. The emitted radiation from the evaporating surface and a reference source was detected by a CCD sensor through a band pass filter of 650 nm. The measured surface temperature generally agreed with those estimated from the deposition rate and the data of the saturated vapor pressure. At high input powers, it was found that the measured value had small difference with the estimated one due to variation of the surface condition. (author).

  19. Temperature profiles on the gadolinium surface during electron beam evaporation

    International Nuclear Information System (INIS)

    Ohba, Hironori; Shibata, Takemasa

    1995-01-01

    The distributions of surface temperature of gadolinium in a water-cooled copper crucible during electron beam evaporation were measured by optical pyrometry. The surface temperatures were obtained from the radiation intensity ratio of the evaporating surface and a reference light source using Planck's law of radiation. The emitted radiation from the evaporating surface and a reference source was detected by a CCD sensor through a band pass filter of 650 nm. The measured surface temperature generally agreed with those estimated from the deposition rate and the data of the saturated vapor pressure. At high input powers, it was found that the measured value had small difference with the estimated one due to variation of the surface condition. (author)

  20. Evolution of the electron temperature profile of ohmically heated plasmas in TFTR

    International Nuclear Information System (INIS)

    Taylor, G.; Efthimion, P.C.; Arunasalam, V.

    1985-08-01

    Blackbody electron cyclotron emission was used to ascertain and study the evolution and behavior of the electron temperature profile in ohmically heated plasmas in the Tokamak Fusion Test Reactor (TFTR). The emission was measured with absolutely calibrated millimeter wavelength radiometers. The temperature profile normalized to the central temperature and minor radius is observed to broaden substantially with decreasing limiter safety factor q/sub a/, and is insensitive to the plasma minor radius. Sawtooth activity was seen in the core of most TFTR discharges and appeared to be associated with a flattening of the electron temperature profile within the plasma core where q less than or equal to 1. Two types of sawtooth behavior were identified in large TFTR plasmas (minor radius, a less than or equal to 0.8 m) : a typically 35 to 40 msec period ''normal'' sawtooth, and a ''compound'' sawtooth with 70 to 80 msec period

  1. Development of a high-resolution electron-beam profile monitor using Fresnel zone plates

    International Nuclear Information System (INIS)

    Nakamura, Norio; Sakai, Hiroshi; Muto, Toshiya; Hayano, Hitoshi

    2004-01-01

    We present a high-resolution and real-time beam profile monitor using Fresnel zone plates (FZPs) developed in the KEK-ATF damping ring. The monitor system has an X-ray imaging optics with two FZPs. In this monitor, the synchrotron radiation from the electron beam at the bending magnet is monochromatized by a crystal monochromator and the transverse electron beam image is twenty-times magnified by the two FZPs and detected on an X-ray CCD camera. The expected spatial resolution for the selected photon energy of 3.235 keV is less than 1 μm. With the beam profile monitor, we succeeded in obtaining a clear electron-beam image and measuring the extremely small beam size less than 10 μm. It is greatly expected that the beam profile monitor will be used in high-brilliance light sources and low-emittance accelerators. (author)

  2. Electron density and temperature profile diagnostics for C-2 field reversed configuration plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Deng, B. H.; Kinley, J. S.; Schroeder, J. [Tri Alpha Energy, Inc., Rancho Santa Margarita, California 92688 (United States)

    2012-10-15

    The 9-point Thomson scattering diagnostic system for the C-2 field reversed configuration plasmas is improved and the measured electron temperature profiles are consistent with theoretical expectations. Rayleigh scattering revealed a finite line width of the ruby laser emission, which complicates density calibration. Taking advantage of the plasma wobble motion, density profile reconstruction accuracy from the 6-chord two-color CO{sub 2}/HeNe interferometer data is improved.

  3. Lone mothers in Sweden

    DEFF Research Database (Denmark)

    Burström, B; Diderichsen, Finn; Shouls, S

    1999-01-01

    To study trends in the health and socioeconomic circumstances of lone mothers in Sweden over the years 1979-1995, and to make comparisons with couple mothers over the same period.......To study trends in the health and socioeconomic circumstances of lone mothers in Sweden over the years 1979-1995, and to make comparisons with couple mothers over the same period....

  4. Energy in Sweden 2010

    Energy Technology Data Exchange (ETDEWEB)

    2010-11-15

    The annual Energy in Sweden report, and its sister publication, Energy in Sweden - Facts and Figures 2010 (STEM-ET--2010-46), are intended to provide decision makers, journalists, companies, teachers and the public with coherent and easily available information on developments in the energy sector. Most of the publication is based on official statistics up to and including 2009, complemented where possible by input reflecting current events and decisions up to the middle of 2010. Energy in Sweden presents facts about the use and supply of energy, present energy- and climate policy and policy measures, energy prices and energy markets, the impact of energy systems on the environment and an international outlook etc. See also the publication Energy in Sweden - Facts and Figures 2010 where the tabular data behind most of the diagrams in Energy in Sweden are presented

  5. Energy in Sweden 2009

    Energy Technology Data Exchange (ETDEWEB)

    2009-12-15

    The annual Energy in Sweden report, and its sister publication, Energy in Sweden: Facts and Figures (STEM-ET--2009-29), are intended to provide decision makers, journalists, companies, teachers and the public with coherent and easily available information on developments in the energy sector. Most of the publication is based on official statistics up to and including 2008, complemented where possible by input reflecting current events and decisions up to the middle of 2009. Energy in Sweden presents facts about the use and supply of energy, present energy- and climate policy and policy measures, energy prices and energy markets, the impact of energy systems on the environment and an international outlook etc. See also the publication Energy in Sweden - Facts and Figures 2009 where the tabular data behind most of the diagrams in Energy in Sweden are presented

  6. Determining of electron temperature profile on the cross section of a Tokamak, using ECE technique

    Directory of Open Access Journals (Sweden)

    M. Hosseinpour

    2007-06-01

    Full Text Available  In this paper we have used plasma electron cyclotron emissions at the second harmonic frequency of extraordinary mode to determine the temperature profile of the plasma produced in IR-T1 Tokamak. The emissions obtained at different frequencies by a 5-channel heterodyne receiver, have been analyzed to determine the spatial variation of the electron temperature on the plasma cross section. The results have been also used to show the three-dimensional time evolution of the temperature profile during the period of confinement.

  7. Real-time evaluation of electron and current density profile parameters on TEXTOR

    International Nuclear Information System (INIS)

    Bruessau, W.D.; Soltwisch, H.

    1985-08-01

    The shapes of electron and current density profiles are monitored in real-time mode in order to get rapid qualitative information on the development of a TEXTOR tokamak plasma. The profiles are described by form parameters which relate to the signals of a 9-channel FIR-polari/interferometer in simple mathematical formulae. These profile parameters are obtained by real-time conversion of measured quantities for display on a storage oscilloscope or on a chart recorder. The application of the parameters is demonstrated in some examples. (orig.)

  8. Electron temperature and density profiles measurement in the TJ-1 tokamak by Thomson scattering

    International Nuclear Information System (INIS)

    Pardo, C.; Zurro, B.

    1986-01-01

    Electron temperature and density profiles of ohmically heated hydrogen plasmas in the TJ-1 tokamak have been measured by Thomson scattering. The temperature profile peaks sharply in the central region while the density profile is very flat. Temperature values between 100 and 390 eV have been measured for densities in the range of 5.10 12 to 2.6.10 13 cm -3 . Parameters characterizing TJ-1 plasma, such as confinement times Z eff , have been deduced from experimental data. Energy confinement times are compared with experimental scaling laws. (author)

  9. Electron number density profiles derived from radio occultation on the CASSIOPE spacecraft

    DEFF Research Database (Denmark)

    Shume, E. B.; Vergados, P.; Komjathy, A.

    2017-01-01

    This paper presents electron number density profiles derived from high resolution Global Positioning System (GPS) radio occultation (RO) observations performed using the Enhanced Polar Outflow Probe (e-POP) payload on the high inclination CAScade, Smallsat and IOnospheric Polar Explorer (CASSIOPE...... good agreement with density profiles estimated from ionosonde data, measured over nearby stations to the latitude and longitude of the RO tangent points, (2) in good agreement with density profiles inferred from GPS RO measured by the Constellation Observing System for Meteorology, Ionosphere...

  10. Bayesian modeling of JET Li-BES for edge electron density profiles using Gaussian processes

    Science.gov (United States)

    Kwak, Sehyun; Svensson, Jakob; Brix, Mathias; Ghim, Young-Chul; JET Contributors Collaboration

    2015-11-01

    A Bayesian model for the JET lithium beam emission spectroscopy (Li-BES) system has been developed to infer edge electron density profiles. The 26 spatial channels measure emission profiles with ~15 ms temporal resolution and ~1 cm spatial resolution. The lithium I (2p-2s) line radiation in an emission spectrum is calculated using a multi-state model, which expresses collisions between the neutral lithium beam atoms and the plasma particles as a set of differential equations. The emission spectrum is described in the model including photon and electronic noise, spectral line shapes, interference filter curves, and relative calibrations. This spectral modeling gets rid of the need of separate background measurements for calculating the intensity of the line radiation. Gaussian processes are applied to model both emission spectrum and edge electron density profile, and the electron temperature to calculate all the rate coefficients is obtained from the JET high resolution Thomson scattering (HRTS) system. The posterior distributions of the edge electron density profile are explored via the numerical technique and the Markov chain Monte Carlo (MCMC) samplings. See the Appendix of F. Romanelli et al., Proceedings of the 25th IAEA Fusion Energy Conference 2014, Saint Petersburg, Russia.

  11. Using elastic peak electron spectroscopy for enhanced depth resolution in sputter profiling

    International Nuclear Information System (INIS)

    Hofmann, S.; Kesler, V.

    2002-01-01

    Elastic peak electron spectroscopy (EPES) is an alternative to AES in sputter depth profiling of thin film structures. In contrast to AES, EPES depth profiling is not influenced by chemical effects. The high count rate ensures a good signal to noise ratio, that is lower measurement times and/or higher precision. In addition, because of the elastically scattered electrons travel twice through the sample, the effective escape depth is reduced, an important factor for the depth resolution function. Thus, the depth resolution is increased. EPES depth profiling was successfully applied to a Ge/Si multilayer structure. For an elastic peak energy of 1.0 keV the information depth is considerably lower (0.8 nm) as compared to the Ge (LMM, 1147 eV) peak (1.6 nm) used in AES depth profiling, resulting in a respectively improved depth resolution for EPES profiling under otherwise similar profiling conditions. EPES depth profiling is successfully applied to measure small diffusion lengths at Ge/Si interfaces of the order of 1 nm. (Authors)

  12. Cohort profile: The Swedish National Register of Urinary Bladder Cancer (SNRUBC) and the Bladder Cancer Data Base Sweden (BladderBaSe).

    Science.gov (United States)

    Häggström, Christel; Liedberg, Fredrik; Hagberg, Oskar; Aljabery, Firas; Ströck, Viveka; Hosseini, Abolfazl; Gårdmark, Truls; Sherif, Amir; Malmström, Per-Uno; Garmo, Hans; Jahnson, Staffan; Holmberg, Lars

    2017-09-27

    To monitor the quality of bladder cancer care, the Swedish National Register of Urinary Bladder Cancer (SNRUBC) was initiated in 1997. During 2015, in order to study trends in incidence, effects of treatment and survival of men and women with bladder cancer, we linked the SNRUBC to other national healthcare and demographic registers and constructed the Bladder Cancer Data Base Sweden (BladderBaSe). The SNRUBC is a nationwide register with detailed information on 97% of bladder cancer cases in Sweden as compared with the Swedish Cancer Register. Participants in the SNRUBC have registered data on tumour characteristics at diagnosis, and for 98% of these treatment data have been captured. From 2009, the SNRUBC holds data on 88% of eligible participants for follow-up 5 years after diagnosis of non-muscle invasive bladder cancer, and from 2011, data on surgery details and complications for 85% of participants treated with radical cystectomy. The BladderBaSe includes all data in the SNRUBC from 1997 to 2014, and additional covariates and follow-up data from linked national register sources on comorbidity, socioeconomic factors, detailed information on readmissions and treatment side effects, and causes of death. Studies based on data in the SNRUBC have shown inequalities in survival and treatment indication by gender, regions and hospital volume. The BladderBaSe includes 38 658 participants registered in SNRUBC with bladder cancer diagnosed from 1 January 1997 to 31 December 2014. The BladderBaSe initiators are currently in collaboration with researchers from the SNRUBC investigating different aspects of bladder cancer survival. The SNRUBC and the BladderBaSe project are open for collaborations with national and international research teams. Collaborators can submit proposals for studies and study files can be uploaded to servers for remote access and analysis. For more information, please contact the corresponding author. © Article author(s) (or their employer

  13. Radial profile of the electron distribution from electron cyclotron emission measurements

    Energy Technology Data Exchange (ETDEWEB)

    Tribaldos, V.; Krivenski, V.

    1993-07-01

    A numerical study is presented, showing the possibility to invert the electron distribution function from a small set of non-thermal spectra, for a regime of lower hybrid current drive. (Author) 7 refs.

  14. Radial profile of the electron distribution from electron cyclotron emission measurements

    International Nuclear Information System (INIS)

    Tribaldos, V.; Krivenski, V.

    1993-01-01

    A numerical study is presented, showing the possibility to invert the electron distribution function from a small set of non-thermal spectra, for a regime of lower hybrid current drive. (Author) 7 refs

  15. Role of substituents on the reactivity and electron density profile of ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Chemical Sciences; Volume 125; Issue 5. Role of substituents on the reactivity and electron density profile of diimine ligands: A density functional theory based study. Bhakti S Kulkarni Deepti Mishra Sourav Pal. Volume 125 Issue 5 September 2013 pp 1247-1258 ...

  16. Spatial profiling of ion and neutral excitation in noble gas electron cyclotron resonance plasmas

    International Nuclear Information System (INIS)

    Rhoades, R.L.; Gorbatkin, S.M.

    1994-01-01

    Optical emission from neutrals and ions of several noble gases has been profiled in an electron cyclotron resonance plasma system. In argon plasmas with a net microwave power of 750 W, the neutral (696.5-nm) and ion (488-nm) emission profiles are slightly center peaked at 0.32 mTorr and gradually shift to a hollow appearance at 2.5 mTorr. Neon profiles show a similar trend from 2.5 to 10.0 mTorr. For the noble gases, transition pressure scales with the ionization potential of the gas, which is consistent with neutral depletion. Studies of noble gas mixtures, however, indicate that neutral depletion is not always dominant in the formation of hollow profiles. For Kr/Ar, Ar/Ne, and Ne/He plasmas, the majority gas tends to set the overall shape of the profile at any given pressure. For the conditions of the current system, plasma density appears to be more dominant than electron temperature in the formation of hollow profiles. The general method described is also a straightforward, inexpensive technique for measuring the spatial distribution of power deposited in plasmas, particularly where absolute scale can be calibrated by some other means

  17. Mars Global Surveyor Radio Science Electron Density Profiles: Interannual Variability and Implications for the Neutral Atmosphere

    Science.gov (United States)

    Bougher, S. W.; Engel, S.; Hinson, D. P.; Murphy, J. R.

    2003-01-01

    The Mars Global Surveyor (MGS) Radio Science (RS) experiment employs an ultrastable oscillator aboard the spacecraft. The signal from the oscillator to Earth is refracted by the Martian ionosphere, allowing retrieval of electron density profiles versus radius and geopotential. The present analysis is carried out on five sets of occultation measurements: (1) four obtained near northern summer solstice (Ls = 74-116, near aphelion) at high northern latitudes (64.7-77.6N), and (2) one set of profiles approaching equinox conditions (Ls = 135- 146) at high southern latitudes (64.7-69.1S). Electron density profiles (95 to 200 km) are examined over a narrow range of solar zenith angles (76.5-86.9 degrees) for local true solar times of (1) 3-4 hours and (2) 12.1 hours. Variations spanning 1-Martian year are specifically examined in the Northern hemisphere.

  18. Comparison of the observed results of the electron density profiles with the IRI90

    International Nuclear Information System (INIS)

    Zhang Manlian; Radicella, S.M.; Dai Kailiang

    1996-01-01

    The daily and composite profiles and the thickness parameter of the electron density profiles are compared with the results of IRI90 for the stations of Ramey (15.8 deg. N, 292.9 deg. E), Wuchang (30.6 deg. N, 114.3 deg. E), Chongqing (29.5 deg. N, 106.4 deg. E) and Wrumchi (43.8 deg. N, 87.6 deg. E). It is found that the electron density profiles produced by IRI90, both with the old Standard B0 and the new Gulyaeva-B0 thickness parameter, are too thick below F2-peak compared with the observed results. It is also shown that the IRI90 results show a very poor agreement with the observed results for the intermediate (F1) layer of the ionosphere. (author). 1 ref., 4 figs,

  19. Electron density profile measurements from hydrogen line intensity ratio method in Versatile Experimental Spherical Torus

    Energy Technology Data Exchange (ETDEWEB)

    Kim, YooSung; Shi, Yue-Jiang, E-mail: yjshi@snu.ac.kr; Yang, Jeong-hun; Kim, SeongCheol; Kim, Young-Gi; Dang, Jeong-Jeung; Yang, Seongmoo; Jo, Jungmin; Chung, Kyoung-Jae [Department of Nuclear Engineering, Seoul National University, Seoul 151-744 (Korea, Republic of); Oh, Soo-Ghee [Division of Energy Systems Research, Ajou University, Suwon 442-749 (Korea, Republic of); Hwang, Y. S. [Department of Nuclear Engineering, Seoul National University, Seoul 151-744 (Korea, Republic of); Center for Advanced Research in Fusion Reactor Engineering, Seoul National University, Seoul 151-744 (Korea, Republic of)

    2016-11-15

    Electron density profiles of versatile experiment spherical torus plasmas are measured by using a hydrogen line intensity ratio method. A fast-frame visible camera with appropriate bandpass filters is used to detect images of Balmer line intensities. The unique optical system makes it possible to take images of H{sub α} and H{sub β} radiation simultaneously, with only one camera. The frame rate is 1000 fps and the spatial resolution of the system is about 0.5 cm. One-dimensional local emissivity profiles have been obtained from the toroidal line of sight with viewing dumps. An initial result for the electron density profile is presented and is in reasonable agreement with values measured by a triple Langmuir probe.

  20. Reconstruction of the electron momentum distribution from a set of directional Compton profiles

    International Nuclear Information System (INIS)

    Hansen, N.K.

    1980-12-01

    A method is described in which the 3-dimensional one-electron momentum density distribution is obtained from a series of directional Compton profiles measured on single crystals; a directional Compton profile being the projection of the momentum density onto a line through the origin. The procedure consists of 1-dimensional Fourier transformations of the individual profiles. The Fourier transformed Compton profiles are fitted by a finite expansion in lattice harmonic functions, and the momentum density is finally obtained by a 3-dimensional Fourier transform. The effect of statistical errors are derived both for the momentum density and its Fourier transform. The problem of how to carry out the measurements in an optimal way has been approached and suggestions made. A computer program for calculation of momentum density and error distributions have been listed in an appendix. (orig.)

  1. Topside electron density: comparison of experimental and IRI model profiles during low solar activity period

    International Nuclear Information System (INIS)

    Alazo, K.; Coisson, P.; Radicella, S.M.

    2003-01-01

    The pattern of the topside electron density profiles is not yet very well represented by the IRI model. In this work the topside profiles obtained by the ISIS-2 satellite during low solar activity conditions are compared to those modeled by IRI. We take the quantitative parameter ε to measure the deviation of the model from the observed profiles. The results showed that the IRI overestimation of the topside profile is higher for low dip latitudes. The dispersion of the epsilon values is from 40 to 140%, more in equinoctial months and some lower for Winter. The best modeling is about 20% to 40% in middle and high latitudes of the North Hemisphere. (author)

  2. Beam profile measurement of ES-200 using secondary electron emission monitor

    Directory of Open Access Journals (Sweden)

    E Ebrahimi Basabi

    2015-09-01

    Full Text Available Up to now, different designs have been introduced for measurement beam profile accelerators. Secondary electron emission monitors (SEM are one of these devices which have been used for this purpose. In this work, a SEM has been constructed to measure beam profile of ES-200 accelerator, a proton electrostatic accelerator which is installed at SBU. Profile grid for both planes designed with 16 wires which are insulated relative to each other. The particles with maximum energy of 200 keV and maximum current of 400 μA are stopped in copper wires. Each of the wires has an individual current-to-voltage amplifier. With a multiplexer, the analogue values are transported to an ADC. The ADCs are read out by a microcontroller and finally profile of beam shows by a user interface program

  3. Multi-channel electronics for secondary emission grid profile monitor of TTF linac

    International Nuclear Information System (INIS)

    Reingardt-Nikoulin, P.; Gaidash, V.; Mirzojan, A.; Kocharyan, V.; Noelle, D.

    2004-01-01

    According to the TTF beam experimental program, a measurement f the time dependence of the energy spread within the bunch train should be done by means of a standard device for profile measurements, that is Secondary Emission Grid (SEMG). SEMG on the high-energy TTF beam is placed in the focal plane of the magnet spectrometer. It should measure the total energy spread in the range from 0.1% up to a few percents for any single or any group of electron bunches in the bunch train of TTF Linac. SEMG profile measurements with new high sensitive electronics are described. Beam results of SEMG Monitor test are given for two modifications of an electronic preamplifier

  4. Monte Carlo study of electron irradiation effect on YBCO dpa profiles

    International Nuclear Information System (INIS)

    Pinnera, I.; Cruz, C.; Abreu, Y.; Leyva, A.; Van Espen, P.

    2011-01-01

    The Monte Carlo assisted Classical Method (MCCM) consists on a calculation procedure for determining the displacements per atom (dpa) distribution in solid materials. This algorithm allows studying the gamma and electron irradiation damage in different materials. It is based on the electrons elastic scattering classic theories and the use of Monte Carlo simulation for the physical processes involved. The present study deals with the Monte Carlo simulation of electron irradiation effects on YBa 2 Cu 3 O 7-x (YBCO) slabs using the MCNPX code system. Displacements per atom distributions are obtained through the MCCM for electron irradiation up to 10 MeV. In-depth dpa profiles for electrons and positrons are obtained and analyzed. Also, for each atomic species in the material, the dpa distributions are calculated. All the results are discussed in the present contribution. (Author)

  5. Link between self-consistent pressure profiles and electron internal transport barriers in tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Razumova, K A [Nuclear Fusion Institute, RRC ' Kurchatov Institute' , 123182 Moscow (Russian Federation); Andreev, V F [Nuclear Fusion Institute, RRC ' Kurchatov Institute' , 123182 Moscow (Russian Federation); Donne, A J H [FOM-Institute for Plasma Physics Rijnhuizen, Association EURATOM-FOM, partner in the Trilateral Euregio Cluster, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Hogeweij, G M D [FOM-Institute for Plasma Physics Rijnhuizen, Association EURATOM-FOM, partner in the Trilateral Euregio Cluster, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Lysenko, S E [Nuclear Fusion Institute, RRC ' Kurchatov Institute' , 123182 Moscow (Russian Federation); Shelukhin, D A [Nuclear Fusion Institute, RRC ' Kurchatov Institute' , 123182 Moscow (Russian Federation); Spakman, G W [FOM-Institute for Plasma Physics Rijnhuizen, Association EURATOM-FOM, partner in the Trilateral Euregio Cluster, PO Box 1207, 3430 BE Nieuwegein (Netherlands); Vershkov, V A [Nuclear Fusion Institute, RRC ' Kurchatov Institute' , 123182 Moscow (Russian Federation); Zhuravlev, V A [Nuclear Fusion Institute, RRC ' Kurchatov Institute' , 123182 Moscow (Russian Federation)

    2006-09-15

    Tokamak plasmas have a tendency to self-organization: the plasma pressure profiles obtained in different operational regimes and even in various tokamaks may be represented by a single typical curve, called the self-consistent pressure profile. About a decade ago local zones with enhanced confinement were discovered in tokamak plasmas. These zones are referred to as internal transport barriers (ITBs) and they can act on the electron and/or ion fluid. Here the pressure gradients can largely exceed the gradients dictated by profile consistency. So the existence of ITBs seems to be in contradiction with the self-consistent pressure profiles (this is also often referred to as profile resilience or profile stiffness). In this paper we will discuss the interplay between profile consistency and ITBs. A summary of the cumulative information obtained from T-10, RTP and TEXTOR is given, and a coherent explanation of the main features of the observed phenomena is suggested. Both phenomena, the self-consistent profile and ITB, are connected with the density of rational magnetic surfaces, where the turbulent cells are situated. The distance between these cells determines the level of their interaction, and therefore the level of the turbulent transport. This process regulates the plasma pressure profile. If the distance is wide, the turbulent flux may be diminished and the ITB may be formed. In regions with rarefied surfaces the steeper pressure gradients are possible without instantaneously inducing pressure driven instabilities, which force the profiles back to their self-consistent shapes. Also it can be expected that the ITB region is wider for lower dq/d{rho} (more rarefied surfaces)

  6. Linnaeus in Uppsala, Sweden.

    Science.gov (United States)

    Cohen, Paul; Cohen, Brenda

    1997-01-01

    Presents a brief life history of Carl Linnaeus, a professor of medicine and botany in Uppsala, Sweden. Highlights his work in developing a classification system for plants and animals, and his botanical lectures and demonstrations. (JRH)

  7. Infrared single shot diagnostics for the longitudinal profile of the electron bunches at FLASH

    International Nuclear Information System (INIS)

    Delsim-Hashemi, Hossein

    2008-09-01

    The longitudinal profile of electron bunches plays an important role in the design of single-pass free electron lasers and future linear e + e - colliders. For the free electron laser FLASH in Hamburg, a longitudinal compression scheme is used which results in an asymmetric longitudinal bunch profile with a 'spike'. This 'spike', which has a very high peak current, is used in a high-gain SASE-FEL process to produce high intensity (about 70 μJ) femtosecond photon pulses in the XUV wavelength range. The required high peak current of the electron bunch is realized by confining a large number of electrons in a width, measured in time units, of few tens of femtosecond, making the diagnostics of such bunches a challenge. Furthermore, the operation of facilities such as FLASH shows that single-shot diagnostics is indispensable. It is intuitive to use a time domain method to measure the electron bunch length. However, when the structures present in the bunch profile fall in the femtoseconds range, this is beyond the resolution of time-resolved methods developed so far. In this thesis, a wavelength-domain technique is described that can fulfill both requirements of single shot and high resolution reaching to the femtoseconds range. The amount of charge that is confined in a typical length of several femtoseconds (FWHM of the spike) can be determined by a novel single-shot spectrometer that resolves the coherent radiation (e.g. coherent transition radiation) in the far-infrared and mid-infrared range. Furthermore the extension of this single-shot spectroscopy to shorter wavelengths reaching the near-infrared, makes it possible to investigate the presence of structures in the bunch profile that might correlate or anti-correlate to the SASE intensity. (orig.)

  8. Infrared single shot diagnostics for the longitudinal profile of the electron bunches at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Delsim-Hashemi, Hossein

    2008-09-15

    The longitudinal profile of electron bunches plays an important role in the design of single-pass free electron lasers and future linear e{sup +}e{sup -} colliders. For the free electron laser FLASH in Hamburg, a longitudinal compression scheme is used which results in an asymmetric longitudinal bunch profile with a 'spike'. This 'spike', which has a very high peak current, is used in a high-gain SASE-FEL process to produce high intensity (about 70 {mu}J) femtosecond photon pulses in the XUV wavelength range. The required high peak current of the electron bunch is realized by confining a large number of electrons in a width, measured in time units, of few tens of femtosecond, making the diagnostics of such bunches a challenge. Furthermore, the operation of facilities such as FLASH shows that single-shot diagnostics is indispensable. It is intuitive to use a time domain method to measure the electron bunch length. However, when the structures present in the bunch profile fall in the femtoseconds range, this is beyond the resolution of time-resolved methods developed so far. In this thesis, a wavelength-domain technique is described that can fulfill both requirements of single shot and high resolution reaching to the femtoseconds range. The amount of charge that is confined in a typical length of several femtoseconds (FWHM of the spike) can be determined by a novel single-shot spectrometer that resolves the coherent radiation (e.g. coherent transition radiation) in the far-infrared and mid-infrared range. Furthermore the extension of this single-shot spectroscopy to shorter wavelengths reaching the near-infrared, makes it possible to investigate the presence of structures in the bunch profile that might correlate or anti-correlate to the SASE intensity. (orig.)

  9. Radiological physics in Sweden

    International Nuclear Information System (INIS)

    Walstam, Rune

    1980-01-01

    Development of radiological or radiation physics as a separate discipline in Sweden is outlined. Growth in number of hospital physicists is compared with that of some other countries for the period 1950-1975. The main duties of hospital physicists are described. Undergraduate and postgraduate courses in radiation physics in Sweden are discussed. A microtron and a multi-source cobalt-60 unit are described. (M.G.B.)

  10. Kabbalah in Sweden

    Directory of Open Access Journals (Sweden)

    Thomas Karlsson

    2008-01-01

    Full Text Available This article examines the history of Kabbalah in Sweden. The reader is presented with an overall view to Kabbalah in Sweden: first, the Johannes Bureus and the Nordic Kabbalah, Kabbalah after Bureus, Kabbalistic literature, and last, Kabbalah in Sweden today. When the Kabbalah reached Sweden it was mainly the non-Jewish Kabbalah that gained influence, even if its Jewish roots were acknowledged. Johannes Bureus unites, in a similar fashion as do the Christian Kabbalists in continental Europe, Christian motifs with the symbolic world of the Kabbalah. Bureus, however, adds runes, ancient Norse gods and Gothic ideas in his own unique manner. The Kabbalah invites speculation and the search for correspondences which has caused the Kabbalah in Sweden to be united with a number of other traditions. Bureus combined the Kabbalah with runes and Gothicism; in the eighteenth and nineteenth centuries we can find the Kabbalah in Freemasonry and Esoteric societies, while the Kabbalah in the twentieth century and onwards has been associated with New Age, Parapsychology and Indian Mysticism. Apart from Bureus, most Kabbalists in Sweden have followed the trends that flourished in the rest of the world. Bureus was the first to create a specifically Swedish interpretation of the Kabbalah.

  11. A robust fibre laser system for electro-optic electron bunch profile measurements at FLASH

    International Nuclear Information System (INIS)

    Wissmann, Laurens-Georg

    2012-08-01

    For the electro-optic measurement of electron bunch profiles at FLASH a robust ytterbium doped fibre laser (YDFL) system has been developed consisting of a laser oscillator and a two-staged amplifier. The oscillator is designed to meet the specifications of high reliability and low noise operation. The amplifier makes use of tailored nonlinearity to enhance the spectral bandwidth of the output laser pulses. Active repetition rate control enables sub-picosecond synchronisation of the laser to the accelerator reference RF. Using a two-stage gating scheme the output pulse train repetition rate is adopted to the accelerator repetition rate. An experimental site used for electro-optic electron bunch diagnostics has been redesigned to support single-shot bunch profile measurements based on spectral decoding. An existing bunch profile monitor with a similar laser system was upgraded and electro-optic bunch profile measurements were conducted, allowing for a comparison with measurements done with other longitudinal electron bunch diagnostics and with former measurements.

  12. A robust fibre laser system for electro-optic electron bunch profile measurements at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Wissmann, Laurens-Georg

    2012-08-15

    For the electro-optic measurement of electron bunch profiles at FLASH a robust ytterbium doped fibre laser (YDFL) system has been developed consisting of a laser oscillator and a two-staged amplifier. The oscillator is designed to meet the specifications of high reliability and low noise operation. The amplifier makes use of tailored nonlinearity to enhance the spectral bandwidth of the output laser pulses. Active repetition rate control enables sub-picosecond synchronisation of the laser to the accelerator reference RF. Using a two-stage gating scheme the output pulse train repetition rate is adopted to the accelerator repetition rate. An experimental site used for electro-optic electron bunch diagnostics has been redesigned to support single-shot bunch profile measurements based on spectral decoding. An existing bunch profile monitor with a similar laser system was upgraded and electro-optic bunch profile measurements were conducted, allowing for a comparison with measurements done with other longitudinal electron bunch diagnostics and with former measurements.

  13. Algorithm Development for Multi-Energy SXR based Electron Temperature Profile Reconstruction

    Science.gov (United States)

    Clayton, D. J.; Tritz, K.; Finkenthal, M.; Kumar, D.; Stutman, D.

    2012-10-01

    New techniques utilizing computational tools such as neural networks and genetic algorithms are being developed to infer plasma electron temperature profiles on fast time scales (> 10 kHz) from multi-energy soft-x-ray (ME-SXR) diagnostics. Traditionally, a two-foil SXR technique, using the ratio of filtered continuum emission measured by two SXR detectors, has been employed on fusion devices as an indirect method of measuring electron temperature. However, these measurements can be susceptible to large errors due to uncertainties in time-evolving impurity density profiles, leading to unreliable temperature measurements. To correct this problem, measurements using ME-SXR diagnostics, which use three or more filtered SXR arrays to distinguish line and continuum emission from various impurities, in conjunction with constraints from spectroscopic diagnostics, can be used to account for unknown or time evolving impurity profiles [K. Tritz et al, Bull. Am. Phys. Soc. Vol. 56, No. 12 (2011), PP9.00067]. On NSTX, ME-SXR diagnostics can be used for fast (10-100 kHz) temperature profile measurements, using a Thomson scattering diagnostic (60 Hz) for periodic normalization. The use of more advanced algorithms, such as neural network processing, can decouple the reconstruction of the temperature profile from spectral modeling.

  14. Electron density profile reconstruction by maximum entropy method with multichannel HCN laser interferometer system on SPAC VII

    International Nuclear Information System (INIS)

    Kubo, S.; Narihara, K.; Tomita, Y.; Hasegawa, M.; Tsuzuki, T.; Mohri, A.

    1988-01-01

    A multichannel HCN laser interferometer system has been developed to investigate the plasma electron confinement properties in SPAC VII device. Maximum entropy method is applied to reconstruct the electron density profile from measured line integrated data. Particle diffusion coefficient in the peripheral region of the REB ring core spherator was obtained from the evolution of the density profile. (author)

  15. Thomson scattering on argon surfatron plasmas at intermediate pressures: Axial profiles of the electron temperature and electron density

    International Nuclear Information System (INIS)

    Palomares, J.M.; Iordanova, E.; Veldhuizen, E.M. van; Baede, L.; Gamero, A.; Sola, A.; Mullen, J.J.A.M. van der

    2010-01-01

    The axial profiles of the electron density n e and electron temperature T e of argon surfatron plasmas in the pressure range of 6-20 mbar and microwave power between 32 and 82 W have been determined using Thomson Scattering of laser irradiation at 532 nm. For the electron density and temperature we found values in the ranges 5 x 10 18 e 19 m -3 and 1.1 e e and T e down to 8% and 3%, respectively. It is found that n e decreases in the direction of the wave propagation with a slope that is nearly constant. The slope depends on the pressure but not on the power. Just as predicted by theories we see that increasing the power leads to longer plasma columns. However, the plasmas are shorter than what is predicted by theories based on the assumption that for the plasma-wave interaction electron-atom collisions are of minor importance (the so-called collisionless regime). The plasma vanishes long before the critical value of the electron density is reached. In contrast to what is predicted by the positive column model it is found that T e does not stay constant along the column, but monotonically increases with the distance from the microwave launcher. Increases of more than 50% over 30 cm were found.

  16. Electron beam based transversal profile measurements of intense ion beams; Elektronenstrahl-Diagnostik zur Bestimmung vom transversalen Profil intensiver Ionenstrahlen

    Energy Technology Data Exchange (ETDEWEB)

    El Moussati, Said

    2014-11-03

    A non-invasive diagnostic method for the experimental determination of the transverse profile of an intense ion beam has been developed and investigated theoretically as well as experimentally within the framework of the present work. The method is based on the deflection of electrons when passing the electromagnetic field of an ion beam. To achieve this an electron beam is employed with a specifically prepared transversal profile. This distinguish this method from similar ones which use thin electron beams for scanning the electromagnetic field [Roy et al. 2005; Blockland10]. The diagnostic method presented in this work will be subsequently called ''Electron-Beam-Imaging'' (EBI). First of all the influence of the electromagnetic field of the ion beam on the electrons has been theoretically analyzed. It was found that the magnetic field causes only a shift of the electrons along the ion beam axis, while the electric field only causes a shift in a plane transverse to the ion beam. Moreover, in the non-relativistic case the magnetic force is significantly smaller than the Coulomb one and the electrons suffer due to the magnetic field just a shift and continue to move parallel to their initial trajectory. Under the influence of the electric field, the electrons move away from the ion beam axis, their resulting trajectory shows a specific angle compared to the original direction. This deflection angle practically depends just on the electric field of the ion beam. Thus the magnetic field has been neglected when analysing the experimental data. The theoretical model provides a relationship between the deflection angle of the electrons and the charge distribution in the cross section of the ion beam. The model however only can be applied for small deflection angles. This implies a relationship between the line-charge density of the ion beam and the initial kinetic energy of the electrons. Numerical investigations have been carried out to clarify the

  17. 2D electron density profile measurement in tokamak by laser-accelerated ion-beam probe.

    Science.gov (United States)

    Chen, Y H; Yang, X Y; Lin, C; Wang, L; Xu, M; Wang, X G; Xiao, C J

    2014-11-01

    A new concept of Heavy Ion Beam Probe (HIBP) diagnostic has been proposed, of which the key is to replace the electrostatic accelerator of traditional HIBP by a laser-driven ion accelerator. Due to the large energy spread of ions, the laser-accelerated HIBP can measure the two-dimensional (2D) electron density profile of tokamak plasma. In a preliminary simulation, a 2D density profile was reconstructed with a spatial resolution of about 2 cm, and with the error below 15% in the core region. Diagnostics of 2D density fluctuation is also discussed.

  18. The improved DGR analytical model of electron density height profile and total electron content in the ionosphere

    OpenAIRE

    Radicella, S. M.; Zhang, M. L.

    1995-01-01

    Tests of the analytical model of the electron density profile originally proposed by G, Di Giovanni and S.M. Radicella (DGR model) have shown the need to introduce improvements in order to obtain a model able to reproduce the ionosphere in a larger spectrum of geophysical and time conditions. The present paper reviews the steps toward such progress and presents the final formulation of the model. It gives also a brief re- view of tests of the improved model done by different authors.

  19. Comparison of ONETRAN calculations of electron beam dose profiles with Monte Carlo and experiment

    International Nuclear Information System (INIS)

    Garth, J.C.; Woolf, S.

    1987-01-01

    Electron beam dose profiles have been calculated using a multigroup, discrete ordinates solution of the Spencer-Lewis electron transport equation. This was accomplished by introducing electron transport cross-sections into the ONETRAN code in a simple manner. The authors' purpose is to ''benchmark'' this electron transport model and to demonstrate its accuracy and capabilities over the energy range from 30 keV to 20 MeV. Many of their results are compared with the extensive measurements and TIGER Monte Carlo data. In general the ONETRAN results are smoother, agree with TIGER within the statistical error of the Monte Carlo histograms and require about one tenth the running time of Monte Carlo

  20. Strato-mesospheric carbon monoxide profiles above Kiruna, Sweden (67.8 ° N, 20.4 ° E), since 2008

    Science.gov (United States)

    Ryan, Niall J.; Palm, Mathias; Raffalski, Uwe; Larsson, Richard; Manney, Gloria; Millán, Luis; Notholt, Justus

    2017-02-01

    This paper presents the retrieval and validation of a self-consistent time series of carbon monoxide (CO) above Kiruna using measurements from the Kiruna Microwave Radiometer (KIMRA). The data set currently spans the years 2008-2015, and measurements are ongoing at Kiruna. The spectra are inverted using an optimal estimation method to retrieve altitude profiles of CO concentrations in the atmosphere within an average altitude range of 48-84 km. Atmospheric temperature data from the Special Sensor Microwave Imager/Sounder aboard the US Air Force meteorological satellite DMSP-F18, are used in the inversion of KIMRA spectra between January 2011 and May 2014. This KIMRA CO data set is compared with CO data from the Microwave Limb Sounder aboard the Aura satellite: there is a maximum bias for KIMRA of ˜ 0.65 ppmv at 68 km (corresponding to 14.7 % of the mean CO value at 68 km) and a maximum relative bias of 22 % (0.44 ppmv) at 60 km. Standard deviations of the differences between profiles are similar in magnitude to the estimated uncertainties in the profiles. Correlations between the instruments are within 0.87 and 0.94. These numbers indicate agreement between the instruments. To expand the CO data set outside of the lifetime of DMSP-F18, another inversion setup was used that incorporates modelled temperatures from the European Centre for Medium-Range Weather Forecasts. The effect on the retrieved CO profiles when using a different temperature data set in the inversion was assessed. A comparison of the two overlapping KIMRA CO data sets shows a positive bias of 0.98 between the lower retrievable altitude limit and 82.5 km. The extended data set shows a larger range ( ≤ 6 %) of CO concentrations that is not explained by random error estimates. Measurements are continuing and the extended KIMRA CO time series currently spans 2008-2015, with gaps corresponding to non-operation and summer periods when CO concentrations below ˜ 90 km drop to very low values. The data

  1. Hollow density profile on electron cyclotron resonance heating JFT-2M plasma

    International Nuclear Information System (INIS)

    Yamauchi, Toshihiko; Hoshino, Katsumichi; Kawashima, Hisato; Ogawa, Toshihide; Kawakami, Tomohide; Shiina, Tomio; Ishige, Youichi

    1998-01-01

    The first hollow electron density profile in the central region on the JAERI Fusion Torus-2M (JFT-2M) is measured during electron cyclotron resonance heating (ECRH) with a TV Thomson scattering system (TVTS). The peripheral region is not hollow but is accumulated due to pump-out from the central region. The hollowness increases with time but is saturated at ∼40 ms and maintains a constant hollow ratio. The hollowness is strongly related to the steep temperature gradient of the heated zone. (author)

  2. Measurements made in the SPS with a rest gas profile monitor by collecting electrons

    International Nuclear Information System (INIS)

    Fischer, C.; Koopman, J.

    2000-01-01

    Measurements have regularly been performed during the 1999 run, using the Rest Gas Monitor installed in the SPS. The exploited signal resulted from electrons produced by ionization of the rest gas during the circulating beam passage. A magnetic field parallel to the electric extraction field was applied to channel the electrons. Proton beam horizontal transverse distributions were recorded during entire SPS acceleration cycles, between 14 GeV/c and 450 GeV/c and for different beam structures and bunch intensities. The influence of several parameters on the measured beam profiles was investigated. Results are presented and analyzed in order to determine the performance that can be expected

  3. Observation of Flat Electron Temperature Profiles in the Lithium Tokamak Experiment

    International Nuclear Information System (INIS)

    Boyle, D. P.; Majeski, R.; Schmitt, J. C.; Auburn University, AL; Hansen, C.

    2017-01-01

    It has been predicted for over a decade that low-recycling plasma-facing components in fusion devices would allow high edge temperatures and flat or nearly flat temperature profiles. In recent experiments with lithium wall coatings in the Lithium Tokamak Experiment (LTX), a hot edge (> 200 eV) and flat electron temperature profiles have been measured following the termination of external fueling. In this work, reduced recycling was demonstrated by retention of ~ 60% of the injected hydrogen in the walls following the discharge. Electron energy confinement followed typical Ohmic confinement scaling during fueling, but did not decrease with density after fueling terminated, ultimately exceeding the scaling by ~ 200% . Lastly, achievement of the low-recycling, hot edge regime has been an important goal of LTX and lithium plasma-facing component research in general, as it has potentially significant implications for the operation, design, and cost of fusion devices.

  4. Modelling of the electron density height profiles in the mid-latitude ionospheric D-region

    Directory of Open Access Journals (Sweden)

    P. Y. Mukhtarov

    1996-06-01

    Full Text Available A new mid-latitude D-region (50-105 km model of the electron density is presented obtained on the basis of a full wave theory and by a trial-and-error inversion method. Daytime (at different solar zenith angles absorption measurements by A3-technique made in Bulgaria yielded data with the aid of which the seasonal and diurnal courses of the Ne(h-profiles were derived. Special attention is drawn to the event diurnal asymmetry, or uneven formation of the ionosphere as a function of insulation. The latter is probably connected with the influence of the diurnal fluctuations in the local temperature on the chemistry involved in the electron loss rate, as well as the diurnal variations of the main ionizing agent (NO in the D-region. That is why the Ne(h-profiles in the midlatitude D-region are modelled separately for morning and afternoon hours.

  5. Electron bunch profile reconstruction in the few fs regime using coherent Smith-Purcell radiation

    International Nuclear Information System (INIS)

    Bartolini, R; Delerue, N; Doucas, G; Reichold, A; Clarke, C

    2012-01-01

    Advanced accelerators for fourth generation light sources based on high brightness linacs or laser-driven wakefield accelerators will operate with intense, highly relativistic electron bunches that are only a few fs long. Diagnostic techniques for the determination of temporal profile of such bunches are required to be non invasive, single shot, economic and with the required resolution in the fs regime. The use of a radiative process such as coherent Smith-Purcell radiation (SPR), is particularly promising with this respect. In this technique the beam is made to radiate a small amount of electromagnetic radiation and the temporal profile is reconstructed from the measured spectral distribution of the radiation. We summarise the advantages of SPR and present the design parameters and preliminary results of the experiments at the FACET facility at SLAC. We also discuss a new approach to the problem of the recovery of the 'missing phase', which is essential for the accurate reconstruction of the temporal bunch profile.

  6. Electron density profile determination by means of laser blow-off injected neutral beam

    International Nuclear Information System (INIS)

    Kocsis, G.; Bakos, J.S.; Ignacz, P.N.; Kardon, B.; Koltai, L.; Veres, G.

    1992-01-01

    This paper is devoted to the experimental and theoretical studies of the determination of the electron density profiles by means of laser blow-off neutrals. For the determination of the density profile the time and spatial distributions of the spectral line radiation intensity of the injected neutrals are used. The method is compared to other previously proposed methods and the advantages and disadvantages of the different methods are discussed. The result of the comparison is that our method gives the most reliable result with the highest temporal resolution for the density profile of the edge plasma. The only disadvantage is the need of careful calibration of the sensitivity of the spatial channels. The advantage is the ability of the method as a standard diagnostic. (orig.)

  7. Electron Bunch Profile Reconstruction in the Few fs Regime using Coherent Smith-Purcell Radiation

    International Nuclear Information System (INIS)

    Bartolini, R.; Clarke, C.; Delerue, N.; Doucasa, G.; Reicholda, A.

    2012-01-01

    Advanced accelerators for fourth generation light sources based on high brightness linacs or laser-driven wakefield accelerators will operate with intense, highly relativistic electron bunches that are only a few fs long. Diagnostic techniques for the determination of temporal profile of such bunches are required to be non invasive, single shot, economic and with the required resolution in the fs regime. The use of a radiative process such as coherent Smith-Purcell radiation (SPR), is particularly promising with this respect. In this technique the beam is made to radiate a small amount of electromagnetic radiation and the temporal profile is reconstructed from the measured spectral distribution of the radiation. We summarise the advantages of SPR and present the design parameters and preliminary results of the experiments at the FACET facility at SLAC. We also discuss a new approach to the problem of the recovery of the 'missing phase', which is essential for the accurate reconstruction of the temporal bunch profile.

  8. 2-D Low Energy Electron Beam Profile Measurement Based on Computer Tomography Algorithm with Multi-Wire Scanner

    CERN Document Server

    Yu, Nengjie; Li Qing Feng; Tang, Chuan-Xiang; Zheng, Shuxin

    2005-01-01

    A new method for low energy electron beam profile measurement is advanced, which presents a full 2-D beam profile distribution other than the traditional 2-D beam profile distribution given by 1-D vertical and horizontal beam profiles. The method is based on the CT (Computer Tomography) algorithm. Multi-sets of data about the 1-D beam profile projections are attained by rotating the multi-wire scanner. Then a 2-D beam profile is reconstructed from these projections with CT algorithm. The principle of this method is presented. The simulation and the experiment results are compared and analyzed in detail.

  9. An analytical approach to characterize morbidity profile dissimilarity between distinct cohorts using electronic medical records

    OpenAIRE

    Schildcrout, Jonathan S.; Basford, Melissa A.; Pulley, Jill M.; Masys, Daniel R.; Roden, Dan M.; Wang, Deede; Chute, Christopher G.; Kullo, Iftikhar J.; Carrell, David; Peissig, Peggy; Kho, Abel; Denny, Joshua C.

    2010-01-01

    We describe a two-stage analytical approach for characterizing morbidity profile dissimilarity among patient cohorts using electronic medical records. We capture morbidities using the International Statistical Classification of Diseases and Related Health Problems (ICD-9) codes. In the first stage of the approach separate logistic regression analyses for ICD-9 sections (e.g., “hypertensive disease” or “appendicitis”) are conducted, and the odds ratios that describe adjusted differences in pre...

  10. The utilization of electronic computers for bone density measurements with iodine 125 profile scanner

    International Nuclear Information System (INIS)

    Reiners, C.

    1974-01-01

    The utilization of electronic computers in the determination of the mineral content in bone with the 125 I profile scanner offers many advantages. The computer considerably lessens intensive work of routine evaluation. It enables the direct calculation of the attenuation coefficients. This means a greater accuracy and correctness of the results compared to the former 'graphical' method, as the approximations are eliminated and reference errors are avoided. (orig./LH) [de

  11. Profile consistency, anomalous electron thermal conduction, and confinement analysis of tokamak devices

    International Nuclear Information System (INIS)

    Qu Wenxiao

    1992-01-01

    Assuming that there exists a position in the tokamak plasma where the energy transport is dominated by local anomalous electron thermal conduction and taking advantage of the basic experimental result usually referred to as profile consistency, the authors obtain a more convincing approach to the description of the confinement property of tokamak devices without touching upon the physical mechanism of global plasma energy transport. 8 refs

  12. Energy in Sweden 2008

    Energy Technology Data Exchange (ETDEWEB)

    2008-12-15

    Energy in Sweden is published annually and is intended to provide decision-makers, journalists, companies, teachers and the general public with a coherent and easily available source of information on developments in the energy sector. Statistics are presented up to and including year 2007, when possible. Energy in Sweden presents facts about the use and supply of energy, present energy- and climate policy and policy measures, energy prices and energy markets, the impact of energy systems on the environment, and an international outlook. A new chapter for this year is Secure energy supply. There is also a chapter on Sweden's share of renewable energy calculated with the definition by the European commission. See also the publication Energy in Sweden - Facts and Figures 2008 where the tabular data behind most of the diagrams in Energy in Sweden are presented. Most of the publication is based on official statistics up to and including 2007, complemented where possible by input reflecting current events and decisions up to the middle of 2008

  13. Power Dependence of the Electron Mobility Profile in a Hall Thruster

    Science.gov (United States)

    Jorns, Benjamin A.; Hofery, Richard H.; Mikellides, Ioannis G.

    2014-01-01

    The electron mobility profile is estimated in a 4.5 kW commercial Hall thruster as a function of discharge power. Internal measurements of plasma potential and electron temperature are made in the thruster channel with a high-speed translating probe. These measurements are presented for a range of throttling conditions from 150 - 400 V and 0.6 - 4.5 kW. The fluid-based solver, Hall2De, is used in conjunction with these internal plasma parameters to estimate the anomalous collision frequency profile at fixed voltage, 300 V, and three power levels. It is found that the anomalous collision frequency profile does not change significantly upstream of the location of the magnetic field peak but that the extent and magnitude of the anomalous collision frequency downstream of the magnetic peak does change with thruster power. These results are discussed in the context of developing phenomenological models for how the collision frequency profile depends on thruster operating conditions.

  14. Properties of ion temperature gradient and trapped electron modes in tokamak plasmas with inverted density profiles

    Science.gov (United States)

    Du, Huarong; Jhang, Hogun; Hahm, T. S.; Dong, J. Q.; Wang, Z. X.

    2017-12-01

    We perform a numerical study of linear stability of the ion temperature gradient (ITG) mode and the trapped electron mode (TEM) in tokamak plasmas with inverted density profiles. A local gyrokinetic integral equation is applied for this study. From comprehensive parametric scans, we obtain stability diagrams for ITG modes and TEMs in terms of density and temperature gradient scale lengths. The results show that, for the inverted density profile, there exists a normalized threshold temperature gradient above which the ITG mode and the TEM are either separately or simultaneously unstable. The instability threshold of the TEM for the inverted density profile is substantially different from that for normal and flat density profiles. In addition, deviations are found on the ITG threshold from an early analytic theory in sheared slab geometry with the adiabatic electron response [T. S. Hahm and W. M. Tang, Phys. Fluids B 1, 1185 (1989)]. A possible implication of this work on particle transport in pellet fueled tokamak plasmas is discussed.

  15. Topside ionospheric vertical electron density profile reconstruction using GPS and ionosonde data: possibilities for South Africa

    Directory of Open Access Journals (Sweden)

    P. Sibanda

    2011-02-01

    Full Text Available Successful empirical modeling of the topside ionosphere relies on the availability of good quality measured data. The Alouette, ISIS and Intercosmos-19 satellite missions provided large amounts of topside sounder data, but with limited coverage of relevant geophysical conditions (e.g., geographic location, diurnal, seasonal and solar activity by each individual mission. Recently, methods for inferring the electron density distribution in the topside ionosphere from Global Positioning System (GPS-based total electron content (TEC measurements have been developed. This study is focused on the modeling efforts in South Africa and presents the implementation of a technique for reconstructing the topside ionospheric electron density (Ne using a combination of GPS-TEC and ionosonde measurements and empirically obtained Upper Transition Height (UTH. The technique produces reasonable profiles as determined by the global models already in operation. With the added advantage that the constructed profiles are tied to reliable measured GPS-TEC and the empirically determined upper transition height, the technique offers a higher level of confidence in the resulting Ne profiles.

  16. Measurement of an electron-beam size with a beam profile monitor using Fresnel zone plates

    International Nuclear Information System (INIS)

    Iida, K.; Nakamura, N.; Sakai, H.; Shinoe, K.; Takaki, H.; Fujisawa, M.; Hayano, H.; Nomura, M.; Kamiya, Y.; Koseki, T.; Amemiya, Y.; Aoki, N.; Nakayama, K.

    2003-01-01

    We present a non-destructive and real-time beam profile monitor using Fresnel zone plates (FZPs) and the measurement of an electron-beam size with this monitor in the KEK-Accelerator Test Facility (ATF) damping ring. The monitor system has the structure of a long-distance X-ray microscope, where two FZPs constitute an X-ray imaging optics. The synchrotron radiation from the electron beam at the bending magnet is monochromatized by a crystal monochromator and the transverse electron beam image is twenty times magnified by the two FZPs and detected on an X-ray CCD camera. The expected spatial resolution for the selected photon energy of 3.235 keV is sufficiently high to measure the horizontal and vertical beam sizes of the ATF damping ring. With the beam profile monitor, we succeeded in obtaining a clear electron-beam image and measuring the extremely small beam size less than 10 μm. The measured magnification of the X-ray imaging optics in the monitor system was in good agreement with the design value

  17. Thomson scattering on argon surfatron plasmas at intermediate pressures: Axial profiles of the electron temperature and electron density

    Energy Technology Data Exchange (ETDEWEB)

    Palomares, J.M., E-mail: f02palij@gmail.co [Departamento de Fisica, Universidad de Cordoba, Campus de Rabanales, ed. C-2, 14071 Cordoba (Spain); Iordanova, E.; Veldhuizen, E.M. van; Baede, L. [Department of Applied Physics, Eindhoven University of Technology, PO Box 513, 5600 MB Eindhoven (Netherlands); Gamero, A.; Sola, A. [Departamento de Fisica, Universidad de Cordoba, Campus de Rabanales, ed. C-2, 14071 Cordoba (Spain); Mullen, J.J.A.M. van der, E-mail: j.j.a.m.v.d.Mullen@tue.n [Department of Applied Physics, Eindhoven University of Technology, PO Box 513, 5600 MB Eindhoven (Netherlands); Departamento de Fisica, Universidad de Cordoba, Campus de Rabanales, ed. C-2, 14071 Cordoba (Spain)

    2010-03-15

    The axial profiles of the electron density n{sub e} and electron temperature T{sub e} of argon surfatron plasmas in the pressure range of 6-20 mbar and microwave power between 32 and 82 W have been determined using Thomson Scattering of laser irradiation at 532 nm. For the electron density and temperature we found values in the ranges 5 x 10{sup 18} < n{sub e} < 8 x 10{sup 19} m{sup -3} and 1.1 < T{sub e} < 2.0 eV. Due to several improvements of the setup we could reduce the errors of n{sub e} and T{sub e} down to 8% and 3%, respectively. It is found that n{sub e} decreases in the direction of the wave propagation with a slope that is nearly constant. The slope depends on the pressure but not on the power. Just as predicted by theories we see that increasing the power leads to longer plasma columns. However, the plasmas are shorter than what is predicted by theories based on the assumption that for the plasma-wave interaction electron-atom collisions are of minor importance (the so-called collisionless regime). The plasma vanishes long before the critical value of the electron density is reached. In contrast to what is predicted by the positive column model it is found that T{sub e} does not stay constant along the column, but monotonically increases with the distance from the microwave launcher. Increases of more than 50% over 30 cm were found.

  18. Energy in Sweden 2007

    Energy Technology Data Exchange (ETDEWEB)

    2007-11-15

    Energy in Sweden is published annually, and is intended to provide decision-makers, journalists and the public with coherent and easily available information on developments in the energy sector. Most of the publication is based on official statistics up to and including 2006, complemented where possible by input reflecting current events and decisions up to the middle of 2007. The publication consists of eight chapters: Current energy and climate policy areas; Policy measures and incentives; Sweden's energy balance; Energy use; Energy markets; An international perspective; The environmental situation; and, Energy facts

  19. Energy in Sweden 2007

    Energy Technology Data Exchange (ETDEWEB)

    2007-11-15

    Energy in Sweden is published annually, and is intended to provide decision-makers, journalists and the public with coherent and easily available information on developments in the energy sector. Most of the publication is based on official statistics up to and including 2006, complemented where possible by input reflecting current events and decisions up to the middle of 2007. The publication consists of eight chapters: Current energy and climate policy areas; Policy measures and incentives; Sweden's energy balance; Energy use; Energy markets; An international perspective; The environmental situation; and, Energy facts

  20. Interaction of the modulated electron beam with inhomogeneous plasma: plasma density profile deformation and langmuir waves excitation

    International Nuclear Information System (INIS)

    Anisimov, I.O.; Kelnyk, O.I.; Soroka, S.V.; Siversky, T.V.

    2005-01-01

    Nonlinear deformation of the initially linear plasma density profile due to the modulated electron beam is studied via computer simulation. In the initial time period the field slaves to the instantaneous profile of the plasma density. Langmuir waves excitation is suppressed by the density profile deformation. The character of the plasma density profile deformation for the late time period depends significantly on the plasma properties. Particularly, for plasma with hot electrons quasi-periodic generation of ion-acoustic pulses takes place in the vicinity of the initial point of plasma resonance

  1. ICRF power deposition profile and determination of the electron thermal diffusivity by modulation experiments in JET

    International Nuclear Information System (INIS)

    Gambier, D.J.; Evrard, M.P.; Adam, J.

    1990-01-01

    The power deposition profile in the ion cyclotron range of frequencies (ICRF) has been investigated experimentally in JET by means of a square wave modulated RF perturbation. The study has been conducted in D(H) and D( 3 He) plasmas for two heating scenarios. In D( 3 He) plasmas and for central heating in a scenario where mode conversion to Bernstein waves is accessible, the direct power deposition profile on electrons has been derived. It accounts for 15% of the total coupled power and extends over 25% of the minor radius. Outside the RF power deposition zone, the electron thermal diffusivity χ e inside the inversion radius surface (r i ) can be estimated through observation of the diffusive electronic transport. In discharges without monster sawteeth and for a low central temperature gradient (∇T e (r ≤ r i ) ≤ ∇T e (r ≥ r i ) approx. = 5 keV·m -1 ) the value obtained is small (approx. =0.24 +- 0.05 m 2 · s -1 ), typically ten times lower than χ e values deduced from heat pulse propagation in similar discharges at radii larger than the inversion radius. For the D(H) minority heating scheme, a large fraction of the ICRF modulated power is absorbed by minority ions, and the minority tail is modulated with a characteristic ion-electron (i-e) slowing-down time. In this scheme, electron heating occurs only through collisions with the minority ion tail and no modulation of the electron temperature is observed in sawtoothing discharges. This is interpreted as a consequence of the long i-e equipartition time, acting as an integrator for the modulated ICRF signal. Finally, a correlation between the time of the sawtooth crash and the periodic turn-off of the ICRF power is found and its consequence for modulation experiments is reviewed. (author). 22 refs, 16 figs

  2. Investigation of Electron Density Profile in the ionospheric D and E region by Kagoshima rocket experiment

    Science.gov (United States)

    Ashihara, Y.; Ishisaka, K.; Miyake, T.; Okada, T.; Nagano, I.; Abe, T.; Ono, T.

    2007-12-01

    The radio wave propagation characteristic in the lower ionosphere is important because of its effect on commercial radio communication, navigation, and broadcast services. The electron density is of primary interest in this region because the high ion-neutral collision frequencies result in radio wave absorption. In order to investigate the ionization structure in the ionospheric D and E region by using the propagation characteristics of MF-band and LF-band radio waves, S-310-37 and S-520-23 sounding rocket experiments have been carried out at Uchinoura Space Center (USC). S-310-37 sounding rocket was launched at 11:20 LT on January 16, 2007. The apex of rocket trajectory was about 138 km. Then S-520-23 sounding rocket was launched at 19:20 LT on September 2, 2007. The apex was about 279 km. As a common measurement, these sounding rockets measure the fields intensities and the waveform of radio waves from NHK Kumamoto broadcasting station (873kHz, 500kW) and JJY signals from Haganeyama LF radio station (60kHz, 50kW). The approximate electron density profile can be determined from the comparison between these experimental results and propagation characteristics calculated by the full wave method. We will get the most probable electron density profile in the ionosphere. In presentation, we will show the propagation characteristic of LF/MF radio waves measured by two sounding rocket experiments. Then we will discuss the analysis method and the estimated electron density profile in the ionosphere.

  3. Experiments on electron temperature profile resilience in FTU tokamak with continuous and modulated ECRH

    International Nuclear Information System (INIS)

    Cirant, S.

    2002-01-01

    Experiments performed on FTU tokamak, aiming at validation of physics-based transport models of the electron temperature profile resilience, are presented. ECRH is used to probe transport features, both in steady-state and in response to perturbations, while ECCD and LHCD are used for current density profile shaping. Observed confinement behaviour shows agreement with a critical temperature gradient length modelling. Central, low gradient plasma is characterized by low stiffness and low electron thermal diffusivity. Strong stiffness and high conduction are found in the confinement region. Resilience is experimentally characterized by an index of the resistance of the profile to adapt its shape to localized ECRH, while the diffusivity and its low-high transition are measured both by power balance and heat pulse propagation analysis. A particular attention is given to the investigation of the transition layer between low-high diffusivity and low-high stiffness regions. A dependence of LTc on magnetic shear, similar to what found in Tore Supra, and consistent with ETG based anomalous transport, is found. (author)

  4. Simulation calculation for the energy deposition profile and the transmission fraction of intense pulsed electron beam at various incident angles

    International Nuclear Information System (INIS)

    Yang Hailiang; Qiu Aici; Zhang Jiasheng; Huang Jianjun; Sun Jianfeng

    2002-01-01

    The incident angles have a heavy effect on the intense pulsed electron beam energy deposition profile, energy deposition fraction and beam current transmission fraction in material. The author presents electron beam energy deposition profile and energy deposition fraction versus electron energy (0.5-2.0 MeV), at various incident angles for three aluminum targets of various thickness via theoretical calculation. The intense pulsed electron beam current transmission fractions versus electron energy (0.4-1.4 MeV) at various incident angles for three thickness of carbon targets were also theoretically calculated. The calculation results indicate that the deposition energy in unit mass of material surface layer increase with the rise of electron beam incident angle, and electron beam with low incident angle (closer to normal incident angle) penetrates deeper into the target material. The electron beams deposit more energy in unit mass of material surface layer at 60 degree-70 degree incident angle

  5. Sweden - energy situation 1986

    International Nuclear Information System (INIS)

    1988-01-01

    The energy situation of Sweden is reviewed on the basis of relevant data. Data on the country's national and international energy policy are followed by an outline of trends in energy sources and electric power generation. Key figures are presented on the country's external trade and balance of payments. (UA) [de

  6. Endemic Tularemia, Sweden, 2003

    OpenAIRE

    Payne, Lara; Arneborn, Malin; Tegnell, Anders; Giesecke, Johan

    2005-01-01

    Tularemia cases have been reported in Sweden since 1931, but no cyclical patterns can be identified. In 2003, the largest outbreak of tularemia since 1967 occurred, involving 698 cases. Increased reports were received from tularemia-nonendemic areas. Causal factors for an outbreak year and associated geographic distribution are not yet understood.

  7. Sweden after the referendum

    International Nuclear Information System (INIS)

    Ragnarson, P.

    1981-01-01

    Interest in the nuclear programme has slumped in the public and political arenas since the referendum in March 1980. How Sweden is now preparing for the implementation of the limited 12-reactor programme, and the associated fuel cycle, in particular the world's first away from reactor irradiated fuel storage, is discussed. (U.K.)

  8. Depth profiling: RBS versus energy-dispersive X-ray imaging using scanning transmission electron microscopy

    International Nuclear Information System (INIS)

    Markwitz, Andreas

    2000-01-01

    Rutherford backscattering spectrometry (RBS) is known to be one of the techniques ideal for analysis of thin films. Elemental concentrations of matrix components and impurities can be investigated as well as depth profiles of almost each element of the periodic table. Best of all, RBS has both a high sensitivity and a high depth resolution, and is a non-destructive analysis technique that does not require specific sample preparation. Solid-state samples are mounted without preparation inside a high-vacuum analysis chamber. However, depth-related interpretation of elemental depth profiles requires the material density of the specimen and stopping power values to be taken into consideration. In many cases, these parameters can be estimated with sufficient precision. However, the assumed density can be inaccurate for depth scales in the nanometer range. For example, in the case of Ge nanoclusters in 500 nm thick SiO 2 layers, uncertainty is related to the actual position of a very thin Ge nanocluster band. Energy-dispersive X-ray emission (EDX) spectroscopy, using a high-resolution scanning transmission electron microscope (STEM) can assist in removing this uncertainty. By preparing a thin section of the specimen, EDX can be used to identify the position of the Ge nanocluster band very precisely, by correlating the Ge profile with the depth profiles of silicon and oxygen. However, extraction of the concentration profiles from STEM-EDX spectra is in general not straightforward. Therefore, a combination of the two very different analysis techniques is often the best and only successful way to extract high-resolution concentration profiles

  9. High-Latitude Topside Ionospheric Vertical Electron Density Profile Changes in Response to Large Magnetic Storms

    Science.gov (United States)

    Benson, Robert F.; Fainberg, Joseph; Osherovich, Vladimir A.; Truhlik, Vladimir; Wang, Yongli; Bilitza, Dieter; Fung, Shing F.

    2016-01-01

    Large magnetic-storm-induced changes were detected in high-latitude topside vertical electron density profiles Ne(h) in a database of profiles and digital topside ionograms, from the International Satellites for Ionospheric Studies (ISIS) program, that enabled Ne(h) profiles to be obtained in nearly the same region of space before, during, and after a major magnetic storm (Dst -100nT). Storms where Ne(h) profiles were available in the high-latitude Northern Hemisphere had better coverage of solar wind parameters than storms with available Ne(h) profiles in the high-latitude Southern Hemisphere. Large Ne(h) changes were observed during all storms, with enhancements and depletions sometimes near a factor of 10 and 0.1, respectively, but with substantial differences in the responses in the two hemispheres. Large spatial andor temporal Ne(h) changes were often observed during Dst minimum and during the storm recovery phase. The storm-induced Ne(h) changes were the most pronounced and consistent in the Northern Hemisphere in that large enhancements were observed during winter nighttime and large depletions during winter and spring daytime. The limited available cases suggested that these Northern Hemisphere enhancements increased with increases of the time-shifted solar wind velocity v, magnetic field B, and with more negative values of the B components except for the highest common altitude (1100km) of the profiles. There was also some evidence suggesting that the Northern Hemisphere depletions were related to changes in the solar wind parameters. Southern Hemisphere storm-induced enhancements and depletions were typically considerably less with depletions observed during summer nighttime conditions and enhancements during summer daytime and fall nighttime conditions.

  10. Studies of longitudinal profile of electron bunches and impedance measurements at Indus-2 synchrotron radiation source

    Energy Technology Data Exchange (ETDEWEB)

    Garg, Akash Deep, E-mail: akash-deep@rrcat.gov.in [Beam Diagnostics Section (BDS), Indus Operations, Beam Dynamics and Diagnostics Division (IOBDD), Raja Ramanna Centre for Advanced Technology, Indore 452 013, M.P. (India); Homi Bhabha National Institute (HBNI) at Raja Ramanna Centre for Advanced Technology, Indore (India); Yadav, S.; Kumar, Mukesh; Shrivastava, B.B.; Karnewar, A.K.; Ojha, A.; Puntambekar, T.A. [Beam Diagnostics Section (BDS), Indus Operations, Beam Dynamics and Diagnostics Division (IOBDD), Raja Ramanna Centre for Advanced Technology, Indore 452 013, M.P. (India)

    2016-04-01

    Indus-2 is a 3rd generation synchrotron radiation source at the Raja Ramanna Centre for Advanced Technology (RRCAT) in India. We study the longitudinal profile of electrons in Indus-2 by using dual sweep synchroscan streak camera at visible diagnostic beamline. In this paper, the longitudinal profiles of electron bunch are analyzed by filling beam current in a single bunch mode. These studies are carried at injection energy (550 MeV) and at ramped beam energy (2.5 GeV). The effects of the wakefield generated interactions between the circulating electrons and the surrounding vacuum chamber are analyzed in terms of measured effects on longitudinal beam distribution. The impedance of the storage ring is obtained by fitting the solutions of Haissinski equation to the measured bunch lengthening with different impedance models. The impedance of storage ring obtained by a series R+L impedance model indicates a resistance (R) of 1350±125 Ω, an inductance (L) of 180±25 nH and broadband impedance of 2.69 Ω. These results are also compared with the values obtained from measured synchronous phase advancing and scaling laws. These studies are very useful in better understanding and control of the electromagnetic interactions.

  11. Measuring Density Profiles of Electrons and Heavy Particles in a Stable Axially Blown Arc

    Science.gov (United States)

    Carstensen, J.; Stoller, P.; Galletti, B.; Doiron, C. B.; Sokolov, A.

    2017-08-01

    Two-color spatial carrier wave interferometry employing pulsed 532- and 671-nm lasers is used to measure the electron-density and heavy-particle-density profiles in the stagnation point of a stable, axially blown arc in argon for currents of 50 to 200 A and stagnation point pressures of 0.2 to 16 bar. This technique takes advantage of the fact that the free-electron contribution to the refractive index depends strongly on the wavelength, while that of the heavy particles does not. The high spatial resolution achieved allows the hot core of the arc to be readily distinguished from the surrounding boundary layer. A custom-built test device is used to ensure flow conditions that lead to a stable, axisymmetric arc; this permits the reconstruction of the density and temperature profiles using a single projection (interferometric image) of the refractive-index distribution through the arc (at two wavelengths). The arc radius determined from the heavy-particle density decreases with increasing stagnation pressure and increases with the current. These measurements are in good agreement with a simple axially blown arc model taking into account Ohmic heating, radiation losses, and enthalpy flow for core temperatures of approximately 16 500 K. The measured electron density at the center of the arc agrees well with a prediction based on local thermodynamic equilibrium.

  12. Proton and electron deep dose profiles for retinoblastoma based on GEANT 4 code

    International Nuclear Information System (INIS)

    Braga, Flavia V.; Campos, Tarcisio P.R. de; Ribeiro, Kilder L.

    2009-01-01

    Herein, the dosimetry responses to a retinoblastoma proton and electron radiation therapy were investigated. The computational tool applied to this simulation was the Geant4 code, version 4.9.1. The code allows simulating the charge particle interaction with eyeball tissue. In the present simulation, a box of 4 cm side water filled had represented the human eye. The simulation was performed considering mono energetic beams of protons and electrons with spectra of 57 to 70 MeV for protons and 2 to 8 MeV for electrons. The simulation was guide by the advanced hadron therapy example distributed with the Geant4 code. The phantom was divided in voxels with 0.2 mm side. The energy deposited in each voxel was evaluated taken the direct beam at one face. The simulation results show the delivery energy and therefore the dose deposited in each voxel. The deep dose profiles to proton and electron were plotted. The well known Bragg peak was reproduced for protons. The maximum delivered dose defined the position at the proton stopped. However, to electrons, the absorbed energies were delivered along its path producing a more continuous distribution following the water depth, but also being stopped in the end of its path. (author)

  13. Proton and electron deep dose profiles for retinoblastoma based on GEANT 4 code

    Energy Technology Data Exchange (ETDEWEB)

    Braga, Flavia V., E-mail: flaviafisica@gmail.co [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Programa de Pos-graduacao em Ciencias e Tecnicas Nucleares; Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Campos, Tarcisio P.R. de [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Programa de Pos-graduacao em Ciencias e Tecnicas Nucleares; Ribeiro, Kilder L., E-mail: kilderlr@gmail.co [Universidade Estadual de Feira de Santana (UEFS), BA (Brazil). Dept. de Fisica

    2009-07-01

    Herein, the dosimetry responses to a retinoblastoma proton and electron radiation therapy were investigated. The computational tool applied to this simulation was the Geant4 code, version 4.9.1. The code allows simulating the charge particle interaction with eyeball tissue. In the present simulation, a box of 4 cm side water filled had represented the human eye. The simulation was performed considering mono energetic beams of protons and electrons with spectra of 57 to 70 MeV for protons and 2 to 8 MeV for electrons. The simulation was guide by the advanced hadron therapy example distributed with the Geant4 code. The phantom was divided in voxels with 0.2 mm side. The energy deposited in each voxel was evaluated taken the direct beam at one face. The simulation results show the delivery energy and therefore the dose deposited in each voxel. The deep dose profiles to proton and electron were plotted. The well known Bragg peak was reproduced for protons. The maximum delivered dose defined the position at the proton stopped. However, to electrons, the absorbed energies were delivered along its path producing a more continuous distribution following the water depth, but also being stopped in the end of its path. (author)

  14. Measurement of current drive profile using electron cyclotron wave attenuation near the O-mode cutoff

    International Nuclear Information System (INIS)

    Fidone, I.; Meyer, R.L.; Caron, X.

    1992-01-01

    A method for determining the radial profile of the lower-hybrid current drive in tokamaks using electron cyclotron attenuation of the O mode for frequencies ω near the cutoff frequency is discussed. The basic idea is that, for a given wave frequency, the cutoff plays the role of a spatial filter selecting a variable portion of the noninductive current. It is shown that the incremental attenuation resulting from a small increase of ω displays specific features related to the current density near the cutoff point. Using the relation between the wave damping and the current density, it is possible to determine the radial profile of the current drive from the wave attenuation measurements. A numerical application is also presented for plasma parameters in the reactor regime

  15. SU-E-T-149: Electron Beam Profile Differences Between Elekta MLCi2 and Elekta Agility Treatment Heads

    Energy Technology Data Exchange (ETDEWEB)

    Wu, C [Sutter Medical Foundation, Roseville, CA 95661 (United States); Hatcher, C [Sutter Shared Services S3, Sacramento, CA (United States)

    2014-06-01

    Purpose: To report and investigate observed differences in electron beam profiles at various energies/applicators between Elekta MLCi2 and Agility treatment head on Elekta Infinity LINAC Methods: When we upgraded from MLCi2 to Agility on one of our Elekta Infinity LINAC's, electron beam PDDs and profiles were acquired for comparison purpose. All clinical electron energies (6/9/12/15/12/18 MeV) and electron applicators (6/10/14/20/25 square) were included in measurement. PDDs were acquired at 100 SSD in water (PTW MP3 water tank) with a plane-parallel ion chamber (PTW Roos). X and Y Profiles were acquired using IC Profiler (Sun Nuclear Corp.) at 1cm and maximum PDD depths (water equivalent). Results: All PDD curves match very well between MLCi2 and Agility treatment head. However, some significant differences on electron profiles were found. On Agility, even after increasing the default auto-tracking offset values for backup diaphragms in Y and MLC in X by 2.8 cm (the maximum allowed change is 3.0 cm), electron profiles still have rounder shoulders comparing to corresponding MLCi2 profiles. This difference is significantly more pronounced at larger applicators (20 and 25 square), for all electron energies. Conclusion: The significant design change between MLCi2 and Agility beam limiting device seems to affect exit electron beam profiles. In IEC1217 X direction, the main change on Agility is the removal of the original MLCi2 X backup diaphragms and replacing it with MLC leaves; In Y direction, the main change is the radius and materials on Y backup diaphragms.

  16. Variable magnification dual lens electron holography for semiconductor junction profiling and strain mapping

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Y.Y., E-mail: wangyy@us.ibm.com [IBM Micro-electronics Division, Zip 40E, Hudson Valley Research Park, 2070 Route 52, Hopewell Junction, NY 12533 (United States); Li, J.; Domenicucci, A. [IBM Micro-electronics Division, Zip 40E, Hudson Valley Research Park, 2070 Route 52, Hopewell Junction, NY 12533 (United States); Bruley, J. [IBM TJ Watson Research Center, 1101 Kitchawan Road, Route 134 Yorktown Heights, NY 10598 (United States)

    2013-01-15

    Dual lens operation for electron holography, which was developed previously (Wang et al., Ultramicroscopy 101 (2004) 63-72; US patent: 7,015,469 B2 (2006)), is re-investigated for bright field (junction profiling) and dark field (strain mapping) electron holography using FEI instrumentation (i.e. F20 and Titan). It is found that dual lens operation provides a wide operational range for electron holography. In addition, the dark field image tilt increases at high objective lens current to include Si Left-Pointing-Angle-Bracket 0 0 4 Right-Pointing-Angle-Bracket diffraction spot. Under the condition of high spatial resolution (1 nm fringe spacing), a large field of view (450 nm), and high fringe contrast (26%) with dual lens operation, a junction map is obtained and strain maps of Si device on Left-Pointing-Angle-Bracket 2 2 0 Right-Pointing-Angle-Bracket and Left-Pointing-Angle-Bracket 0 0 4 Right-Pointing-Angle-Bracket diffraction are acquired. In this paper, a fringe quality number, N Prime , which is number of fringe times fringe contrast, is proposed to estimate the quality of an electron hologram and mathematical reasoning for the N Prime number is provided. -- Highlights: Black-Right-Pointing-Pointer Dual lens electron holography is implemented on FEI instruments (Titan and F20). Black-Right-Pointing-Pointer Wide range of field of view (0.1-0.9 {mu}m) and fringe spacing (0.5-6 nm) is achieved. Black-Right-Pointing-Pointer Fringe quality number is proposed to quantify the quality of an electron hologram. Black-Right-Pointing-Pointer Junction map at high spatial resolution is provided. Black-Right-Pointing-Pointer Strain maps along Left-Pointing-Angle-Bracket 2 2 0 Right-Pointing-Angle-Bracket and Left-Pointing-Angle-Bracket 0 0 4 Right-Pointing-Angle-Bracket direction of Si by dark field electron holography are reported.

  17. Variable magnification dual lens electron holography for semiconductor junction profiling and strain mapping

    International Nuclear Information System (INIS)

    Wang, Y.Y.; Li, J.; Domenicucci, A.; Bruley, J.

    2013-01-01

    Dual lens operation for electron holography, which was developed previously (Wang et al., Ultramicroscopy 101 (2004) 63–72; US patent: 7,015,469 B2 (2006)), is re-investigated for bright field (junction profiling) and dark field (strain mapping) electron holography using FEI instrumentation (i.e. F20 and Titan). It is found that dual lens operation provides a wide operational range for electron holography. In addition, the dark field image tilt increases at high objective lens current to include Si 〈0 0 4〉 diffraction spot. Under the condition of high spatial resolution (1 nm fringe spacing), a large field of view (450 nm), and high fringe contrast (26%) with dual lens operation, a junction map is obtained and strain maps of Si device on 〈2 2 0〉 and 〈0 0 4〉 diffraction are acquired. In this paper, a fringe quality number, N′, which is number of fringe times fringe contrast, is proposed to estimate the quality of an electron hologram and mathematical reasoning for the N′ number is provided. -- Highlights: ► Dual lens electron holography is implemented on FEI instruments (Titan and F20). ► Wide range of field of view (0.1–0.9 μm) and fringe spacing (0.5–6 nm) is achieved. ► Fringe quality number is proposed to quantify the quality of an electron hologram. ► Junction map at high spatial resolution is provided. ► Strain maps along 〈2 2 0〉 and 〈0 0 4〉 direction of Si by dark field electron holography are reported.

  18. Measurements of electron density and temperature profiles in a gas blanket experiment

    International Nuclear Information System (INIS)

    Kuthy, A.

    1979-02-01

    Radial profiles of electron density, temperature and H sub(β) intensity are presented for the rotating plasma device F-1. The hydrogen filling pressure, the average magnetic field strength at the midplane, and the power input to the discharge have been varied in the ranges 10-100 mTorr, 0.25-0.5 Tesla, and 0.1 to 1.5 MW, respectively. These experiments have been performed with the main purpose of studying the gas blanket (cold-mantle) state of the plasma. It is shown, that a simple spectroscopic method can be used to derive the radial distribution of the electron temperature in such plasmas. The observed peak temperatures and densities are in agreement with earlier theoretical estimates. (author)

  19. Reciprocal space mapping by spot profile analyzing low energy electron diffraction

    International Nuclear Information System (INIS)

    Meyer zu Heringdorf, Frank-J.; Horn-von Hoegen, Michael

    2005-01-01

    We present an experimental approach for the recording of two-dimensional reciprocal space maps using spot profile analyzing low energy electron diffraction (SPA-LEED). A specialized alignment procedure eliminates the shifting of LEED patterns on the screen which is commonly observed upon variation of the electron energy. After the alignment, a set of one-dimensional sections through the diffraction pattern is recorded at different energies. A freely available software tool is used to assemble the sections into a reciprocal space map. The necessary modifications of the Burr-Brown computer interface of the two Leybold and Omicron type SPA-LEED instruments are discussed and step-by-step instructions are given to adapt the SPA 4.1d software to the changed hardware. Au induced faceting of 4 deg. vicinal Si(001) is used as an example to demonstrate the technique

  20. Measurement of surface temperature profiles on liquid uranium metal during electron beam evaporation

    Energy Technology Data Exchange (ETDEWEB)

    Ohba, Hironori; Shibata, Takemasa [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-11-01

    Surface temperature distributions of liquid uranium in a water-cooled copper crucible during electron beam evaporation were measured. Evaporation surface was imaged by a lens through a band-path filter (650{+-}5 nm) and a double mirror system on a charge coupled device (CCD) camera. The video signals of the recorded image were connected to an image processor and converted to two-dimensional spectral radiance profiles. The surface temperatures were obtained from the spectral radiation intensity ratio of the evaporation surface and a freezing point of uranium and/or a reference light source using Planck`s law of radiation. The maximum temperature exceeded 3000 K and had saturation tendency with increasing electron beam input. The measured surface temperatures agreed with those estimated from deposition rates and data of saturated vapor pressure of uranium. (author)

  1. Ultraviolet laser transverse profile shaping for improving x-ray free electron laser performance

    International Nuclear Information System (INIS)

    Li, S.; Alverson, S.; Bohler, D.; Egger, A.; Fry, A.

    2017-01-01

    The photocathode rf gun is one of the most critical components in x-ray free electron lasers. The drive laser strikes the photocathode surface, which emits electrons with properties that depend on the shape of the drive laser. Most free electron lasers use photocathodes with work function in the ultraviolet, a wavelength where direct laser manipulation becomes challenging. In this paper, we present a novel application of a digital micromirror device (DMD) for the 253 nm drive laser at the Linear Coherent Light Source. Laser profile shaping is accomplished through an iterative algorithm that takes into account shaping error and efficiency. Next, we use laser shaping to control the X-ray laser output via an online optimizer, which shows improvement in FEL pulse energy. Lastly, as a preparation for electron beam shaping, we use the DMD to measure the photocathode quantum efficiency across cathode surface with an averaged laser rms spot size of 59 μm. In conclusion, our experiments demonstrate promising outlook of using DMD to shape ultraviolet lasers for photocathode rf guns with various applications.

  2. Ultraviolet laser transverse profile shaping for improving x-ray free electron laser performance

    Science.gov (United States)

    Li, S.; Alverson, S.; Bohler, D.; Egger, A.; Fry, A.; Gilevich, S.; Huang, Z.; Miahnahri, A.; Ratner, D.; Robinson, J.; Zhou, F.

    2017-08-01

    The photocathode rf gun is one of the most critical components in x-ray free electron lasers. The drive laser strikes the photocathode surface, which emits electrons with properties that depend on the shape of the drive laser. Most free electron lasers use photocathodes with work function in the ultraviolet, a wavelength where direct laser manipulation becomes challenging. In this paper, we present a novel application of a digital micromirror device (DMD) for the 253 nm drive laser at the Linear Coherent Light Source. Laser profile shaping is accomplished through an iterative algorithm that takes into account shaping error and efficiency. Next, we use laser shaping to control the X-ray laser output via an online optimizer, which shows improvement in FEL pulse energy. Lastly, as a preparation for electron beam shaping, we use the DMD to measure the photocathode quantum efficiency across cathode surface with an averaged laser rms spot size of 59 μ m . Our experiments demonstrate promising outlook of using DMD to shape ultraviolet lasers for photocathode rf guns with various applications.

  3. Variable magnification dual lens electron holography for semiconductor junction profiling and strain mapping.

    Science.gov (United States)

    Wang, Y Y; Li, J; Domenicucci, A; Bruley, J

    2013-01-01

    Dual lens operation for electron holography, which was developed previously (Wang et al., Ultramicroscopy 101 (2004) 63-72; US patent: 7,015,469 B2 (2006)), is re-investigated for bright field (junction profiling) and dark field (strain mapping) electron holography using FEI instrumentation (i.e. F20 and Titan). It is found that dual lens operation provides a wide operational range for electron holography. In addition, the dark field image tilt increases at high objective lens current to include Si diffraction spot. Under the condition of high spatial resolution (1 nm fringe spacing), a large field of view (450 nm), and high fringe contrast (26%) with dual lens operation, a junction map is obtained and strain maps of Si device on and diffraction are acquired. In this paper, a fringe quality number, N', which is number of fringe times fringe contrast, is proposed to estimate the quality of an electron hologram and mathematical reasoning for the N' number is provided. Copyright © 2012 Elsevier B.V. All rights reserved.

  4. Finding evidence for density fluctuation effects on electron cyclotron heating deposition profiles on DIII-D

    International Nuclear Information System (INIS)

    Brookman, M. W.; Austin, M. E.; Petty, C. C.

    2015-01-01

    Theoretical work, computation, and results from TCV [J. Decker “Effect of density fluctuations on ECCD in ITER and TCV,” EPJ Web of Conf. 32, 01016 (2012)] suggest that density fluctuations in the edge region of a tokamak plasma can cause broadening of the ECH deposition profile. In this paper, a GUI tool is presented which is used for analysis of ECH deposition as a first step towards looking for this broadening, which could explain effects seen in previous DIII-D ECH transport studies [K.W. Gentle “Electron energy transport inferences from modulated electron cyclotron heating in DIII-D,” Phys. Plasmas 13, 012311 (2006)]. By applying an FFT to the T e measurements from the University of Texas’s 40-channel ECE Radiometer, and using a simplified thermal transport equation, the flux surface extent of ECH deposition is determined. The Fourier method analysis is compared with a Break-In-Slope (BIS) analysis and predictions from the ray-tracing code TORAY. Examination of multiple Fourier harmonics and BIS fitting methods allow an estimation of modulated transport coefficients and thereby the true ECH deposition profile. Correlations between edge fluctuations and ECH deposition in legacy data are also explored as a step towards establishing a link between fluctuations and deposition broadening in DIII-D

  5. Dynamic wedge, electron energy and beam profile Q.A. using an ionization chamber linear array

    International Nuclear Information System (INIS)

    Kenny, M.B.; Todd, S.P.

    1996-01-01

    Since the introduction of multi-modal linacs the quality assurance workload of a Physical Sciences department has increased dramatically. The advent of dynamic wedges has further complicated matters because of the need to invent accurate methods to perform Q.A. in a reasonable time. We have been using an ionization chamber linear array, the Thebes 7000 TM by Victoreen, Inc., for some years to measure X-ray and electron beam profiles. Two years ago we developed software to perform Q.A. on our dynamic wedges using the array and more recently included a routine to check electron beam energies using the method described by Rosenow, U.F. et al., Med. Phys. 18(1) 19-25. The integrated beam and profile management system has enabled us to maintain a comprehensive quality assurance programme on all our linaccs. Both our efficiency and accuracy have increased to the point where we are able to keep up with the greater number of tests required without an increase in staff or hours spent in quality assurance. In changing the processor from the Z80 of the Thebes console to the 486 of the PC we have also noticed a marked increase in the calibration stability of the array. (author)

  6. Validation of honey-bee smelling profile by using a commercial electronic nose

    Directory of Open Access Journals (Sweden)

    Ana R. Correa

    2017-09-01

    Full Text Available Honey is a natural sweetener and its quality labels are associated to its botanical or geographical origin, which is being established by palynological and sensorial analysis. The use of fast and non-invasive techniques such as an electronic nose can become an alternative for honey classification. In this study, the operational parameters of a commercial electronic nose were validated to determine the honey odor profile. A central composite design with five factors, three levels and 28 assays was used, varying sample amounts (1, 2 and 3 g, incubation temperature (30, 40 and 50 °C, incubation time 30 min, gas flow (50, 150 and 250 mL/min and injection time (100, 200 and 300 s. The commercial nose had ten sensors. Repeatability was evaluated with a coefficient of variation of 10 %. The response surface methodology was used and the optimal operating conditions were: 3 g of sample, incubation at 50 °C for 17 min, gas flow of 100 mL/min and sampling time of 150 s. Finally, these parameters were used to analyze 19 samples of honey, which were classified according to their odor profiles, showing that it can be a useful tool to classify honey.

  7. Finding evidence for density fluctuation effects on electron cyclotron heating deposition profiles on DIII-D

    Energy Technology Data Exchange (ETDEWEB)

    Brookman, M. W., E-mail: brookmanmw@fusion.gat.com; Austin, M. E. [Institute for Fusion Studies, University of Texas at Austin, MS 13-505, 3483 Dunhill St, San Diego, CA 92121-1200 (United States); Petty, C. C. [General Atomics, PO Box 85608, San Diego, CA 92186-5608 (United States)

    2015-12-10

    Theoretical work, computation, and results from TCV [J. Decker “Effect of density fluctuations on ECCD in ITER and TCV,” EPJ Web of Conf. 32, 01016 (2012)] suggest that density fluctuations in the edge region of a tokamak plasma can cause broadening of the ECH deposition profile. In this paper, a GUI tool is presented which is used for analysis of ECH deposition as a first step towards looking for this broadening, which could explain effects seen in previous DIII-D ECH transport studies [K.W. Gentle “Electron energy transport inferences from modulated electron cyclotron heating in DIII-D,” Phys. Plasmas 13, 012311 (2006)]. By applying an FFT to the T{sub e} measurements from the University of Texas’s 40-channel ECE Radiometer, and using a simplified thermal transport equation, the flux surface extent of ECH deposition is determined. The Fourier method analysis is compared with a Break-In-Slope (BIS) analysis and predictions from the ray-tracing code TORAY. Examination of multiple Fourier harmonics and BIS fitting methods allow an estimation of modulated transport coefficients and thereby the true ECH deposition profile. Correlations between edge fluctuations and ECH deposition in legacy data are also explored as a step towards establishing a link between fluctuations and deposition broadening in DIII-D.

  8. Dependence of L-mode confinement on the electron cyclotron power deposition profile in the TCV tokamak

    Science.gov (United States)

    Kirneva, N. A.; Razumova, K. A.; Pochelon, A.; Behn, R.; Coda, S.; Curchod, L.; Duval, B. P.; Goodman, T. P.; Labit, B.; Karpushov, A. N.; Rancic, M.; Sauter, O.; Silva, M.; TCV Team

    2012-01-01

    Scenarios with different electron cyclotron heating power profile distributions and widths were compared for the first time in experiments on the Tokamak à Configuration Variable (TCV). The heating profile was changed from shot to shot over a wide range from localized on-axis, with normalized minor radius half-width at half maximum σ1/2 ~ 0.1, up to a widely distributed heating power profile with σ1/2 ~ 0.4 and finally to a profile peaked far off-axis. The global confinement, MHD activity, density, temperature and electron pressure profile evolution were compared. In particular, the energy confinement properties of discharges with localized on-axis heating and distributed on-axis heating were very similar, with degradation close to that predicted by the ITER L-mode scaling; in the case of off-axis heating, on the other hand, the confinement degradation was even stronger.

  9. Country policy profile - Sweden. December 2015

    International Nuclear Information System (INIS)

    2015-12-01

    The main support mechanism for electricity from RES is a quota system that is based on a certificate trading system. Furthermore, tax incentives are in place and PV installations are subsidised with grants. Promotion of heating from RES is mainly promoted through tax exemptions. Households may deduct investments of renewable energy heating installations replacing heating systems based on fossil fuels from tax. Heating from RES further benefits from an exemption of various taxes, as carbon dioxide taxes on supply, import and production of fossil fuels for heating purposes, which apply for fossil fuels (RES LEGAL Europe, 2014)

  10. Country policy profile - Sweden. August 2015

    International Nuclear Information System (INIS)

    2015-08-01

    The main support mechanism for electricity from RES is a quota system that is based on a certificate trading system. Furthermore, tax incentives are in place and PV installations are subsidised with grants. Promotion of heating from RES is mainly promoted through tax exemptions. Households may deduct investments of renewable energy heating installations replacing heating systems based on fossil fuels from tax. Heating from RES further benefits from an exemption of various taxes, as carbon dioxide taxes on supply, import and production of fossil fuels for heating purposes, which apply for fossil fuels (RES LEGAL Europe, 2014)

  11. Precision and resolution on Tore-Supra ECE electron temperature profile measurements

    International Nuclear Information System (INIS)

    Segui, J.L.; Molina, D.; Goniche, M.

    2003-01-01

    A 16-channel heterodyne radiometer, 2 GHz spaced, is used on Tore-Supra to measure the electron cyclotron emission in the frequency range 78-110 GHz for the O mode and 94 -126 GHz for the X mode. In the equatorial plane, a dual polarisation Gaussian optics lens antenna, with a perpendicular line of sight (with respect to the magnetic field), gives ECE measurements with very low refraction and Doppler effects. A separate O/X mode RF front-end allows the use of an IF electronic mode selector. This improves time stability calibration and gives the potentiality of simultaneous O/X mode measurements in the 94 -110 GHz RF band for polarisation studies. RF and IF filters reject the gyrotron frequency (118 GHz) in order to perform temperature measurements during ECRH plasmas. A precise absolute spectral calibration is performed outside the vacuum vessel by using a 600 deg. C black body, a digital signal averaging on the waveform generated by a mechanical chopper placed directly in front of it, and a simulation window without Fabry-Perot effects. The calibration precision leads to ECE temperature profiles which are very consistent with Thomson scattering measurements and guarantees a good stability of the ECE profiles for small changes on the magnetic field (absolute precision ± 6%, relative precision between channels ± 3%). Post-pulse data processing takes routinely into account the total magnetic field (B vacuum with ripple, B para , B dia , B pol , all with analytical formulations), the radial relativistic shift (analytical formulation is used), the refraction, not described in this paper, (cut-off detection with safety margin to avoid strong refraction), the nonthermal ECE spectra, not described in this paper, during LHCD (using an electron density threshold criterion). These previous analytical formulations are compatible with real time processing. Relativistic radial broadening simulations show that it is useful to fulfill 32 channels (1 GHz spaced). (authors)

  12. Precision and resolution on Tore-Supra ECE electron temperature profile measurements

    Energy Technology Data Exchange (ETDEWEB)

    Segui, J.L.; Molina, D.; Goniche, M. [Association EURATOM -CEA, CEA/DSM/DRFC CEA-Cadarache, 13108 St Paul-lez-Durance (France)

    2003-07-01

    A 16-channel heterodyne radiometer, 2 GHz spaced, is used on Tore-Supra to measure the electron cyclotron emission in the frequency range 78-110 GHz for the O mode and 94 -126 GHz for the X mode. In the equatorial plane, a dual polarisation Gaussian optics lens antenna, with a perpendicular line of sight (with respect to the magnetic field), gives ECE measurements with very low refraction and Doppler effects. A separate O/X mode RF front-end allows the use of an IF electronic mode selector. This improves time stability calibration and gives the potentiality of simultaneous O/X mode measurements in the 94 -110 GHz RF band for polarisation studies. RF and IF filters reject the gyrotron frequency (118 GHz) in order to perform temperature measurements during ECRH plasmas. A precise absolute spectral calibration is performed outside the vacuum vessel by using a 600 deg. C black body, a digital signal averaging on the waveform generated by a mechanical chopper placed directly in front of it, and a simulation window without Fabry-Perot effects. The calibration precision leads to ECE temperature profiles which are very consistent with Thomson scattering measurements and guarantees a good stability of the ECE profiles for small changes on the magnetic field (absolute precision {+-} 6%, relative precision between channels {+-} 3%). Post-pulse data processing takes routinely into account the total magnetic field (B{sub vacuum} with ripple, B{sub para}, B{sub dia}, B{sub pol}, all with analytical formulations), the radial relativistic shift (analytical formulation is used), the refraction, not described in this paper, (cut-off detection with safety margin to avoid strong refraction), the nonthermal ECE spectra, not described in this paper, during LHCD (using an electron density threshold criterion). These previous analytical formulations are compatible with real time processing. Relativistic radial broadening simulations show that it is useful to fulfill 32 channels (1 GHz

  13. Profiles

    International Nuclear Information System (INIS)

    2004-01-01

    Profiles is a synthetic overview of more than 100 national energy markets in the world, providing insightful facts and key energy statistics. A Profile is structured around 6 main items and completed by key statistics: Ministries, public agencies, energy policy are concerned; main companies in the oil, gas, electricity and coal sectors, status, shareholders; reserve, production, imports and exports, electricity and refining capacities; deregulation of prices, subsidies, taxes; consumption trends by sector, energy market shares; main energy projects, production and consumption prospects. Statistical Profiles are present in about 3 pages the main data and indicators on oil, gas, coal and electricity. (A.L.B.)

  14. Retrieval of Electron Density Profile for KOMPSAT-5 GPS Radio Occultation

    Directory of Open Access Journals (Sweden)

    Woo-Kyoung Lee

    2007-12-01

    Full Text Available The AOPOD (Atmosphere Occultation and Precision Orbit Determination system, the secondary payload of KOMPSAT (KOrea Multi-Purpose SATellite-5 scheduled to be launched in 2010, shall provide GPS radio occultation data. In this paper, we simulated the GPS radio occultation characteristic of KOMPSAT-5 and retrieved electron density profiles using KROPS (KASI Radio Occultation Processing Software. The electron density retrieved from CHAMP (CHAllenging Minisatellite Payload GPS radio occultation data on June 20, 2004 was compared with IRI (International Reference Ionosphere - 2001, PLP (Planar Langmuir Probe, and ionosonde measurements. When the result was compared with ionosonde measurements, the discrepancies were 5 km on the F_2 peak height (hmF_2 and 3×10^{10} el/m^3 on the electron density of the F_2 peak height (NmF_2. By comparing with the Langmuir Probe measurements of CHAMP satellite (PLP, both agrees with 1.6×10^{11} el/m^3 at the height of 365.6 km.

  15. Longitudinal profile diagnostic scheme with subfemtosecond resolution for high-brightness electron beams

    Directory of Open Access Journals (Sweden)

    G. Andonian

    2011-07-01

    Full Text Available High-resolution measurement of the longitudinal profile of a relativistic electron beam is of utmost importance for linac based free-electron lasers and other advanced accelerator facilities that employ ultrashort bunches. In this paper, we investigate a novel scheme to measure ultrashort bunches (subpicosecond with exceptional temporal resolution (hundreds of attoseconds and dynamic range. The scheme employs two orthogonally oriented deflecting sections. The first imparts a short-wavelength (fast temporal resolution horizontal angular modulation on the beam, while the second imparts a long-wavelength (slow angular kick in the vertical dimension. Both modulations are observable on a standard downstream screen in the form of a streaked sinusoidal beam structure. We demonstrate, using scaled variables in a quasi-1D approximation, an expression for the temporal resolution of the scheme and apply it to a proof-of-concept experiment at the UCLA Neptune high-brightness injector facility. The scheme is also investigated for application at the SLAC NLCTA facility, where we show that the subfemtosecond resolution is sufficient to resolve the temporal structure of the beam used in the echo-enabled free-electron laser. We employ beam simulations to verify the effect for typical Neptune and NLCTA parameter sets and demonstrate the feasibility of the concept.

  16. Electron beam and optical depth profiling of quasibulk GaN

    International Nuclear Information System (INIS)

    Chernyak, L.; Osinsky, A.; Nootz, G.; Schulte, A.; Jasinski, J.; Benamara, M.; Liliental-Weber, Z.; Look, D. C.; Molnar, R. J.

    2000-01-01

    Electron beam and optical depth profiling of thick (5.5--64 μm) quasibulk n-type GaN samples, grown by hydride vapor-phase epitaxy, were carried out using electron beam induced current (EBIC), microphotoluminescence (PL), and transmission electron microscopy (TEM). The minority carrier diffusion length, L, was found to increase linearly from 0.25 μm, at a distance of about 5 μm from the GaN/sapphire interface, to 0.63 μm at the GaN surface, for a 36-μm-thick sample. The increase in L was accompanied by a corresponding increase in PL band-to-band radiative transition intensity as a function of distance from the GaN/sapphire interface. We attribute the latter changes in PL intensity and minority carrier diffusion length to a reduced carrier mobility and lifetime at the interface, due to scattering at threading dislocations. The results of EBIC and PL measurements are in good agreement with the values for dislocation density obtained using TEM

  17. Energy in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-11-01

    Energy in Sweden is published annually by the Swedish Energy Agency. Energy in Sweden 2004, together with its statistics supplement, Energy in Sweden: Facts and Figures 2004, is intended to provide decision-makers, journalists and the public with a single source of easily available information on conditions and developments in the energy sector. In recent years, Swedish energy and environmental policy has been increasingly concentrated on establishing or improving the long-term conditions for efficient energy markets and efficient use of energy. Restructuring of the Swedish electricity market, greater internationalisation and the effects of the energy system on the wider environment and on climate are important factors that influence the direction of energy policy and so also development of the energy markets. The line that was started by the 2002 Energy Policy Agreement, under the name of Working Together for a Reliable, Efficient and Environmentally Aware Energy Supply (Bill no. 2001/02:143), continues. The shift in taxation policy to encourage the move towards a sustainable energy system and reduced environmental impact continues, as exemplified by the introduction of the electricity certificate system on 1st May 2003. The negotiations that were started in 2003 with a view to progressive shut-down of nuclear power generation were broken off in October 2004 without having reached agreement with the nuclear power companies. As soon as the breakdown of the negotiations was announced, the Government, together with the Left Party and the Centre Party, stated that Barsebaeck 2 will be closed in 2005. Sweden's climate policy is based on the Climate Strategy Act (Bill no. 2001/02:55), which was adopted by Parliament in March 2002. It is expected that trading in emission rights, in accordance with the EU Emissions Trading Directive, will start in January 2005, with publication of national emission rights allocations on 30th September 2004. One of the more important

  18. Energy in Sweden 2004

    International Nuclear Information System (INIS)

    2004-11-01

    Energy in Sweden is published annually by the Swedish Energy Agency. Energy in Sweden 2004, together with its statistics supplement, Energy in Sweden: Facts and Figures 2004, is intended to provide decision-makers, journalists and the public with a single source of easily available information on conditions and developments in the energy sector. In recent years, Swedish energy and environmental policy has been increasingly concentrated on establishing or improving the long-term conditions for efficient energy markets and efficient use of energy. Restructuring of the Swedish electricity market, greater internationalisation and the effects of the energy system on the wider environment and on climate are important factors that influence the direction of energy policy and so also development of the energy markets. The line that was started by the 2002 Energy Policy Agreement, under the name of Working Together for a Reliable, Efficient and Environmentally Aware Energy Supply (Bill no. 2001/02:143), continues. The shift in taxation policy to encourage the move towards a sustainable energy system and reduced environmental impact continues, as exemplified by the introduction of the electricity certificate system on 1st May 2003. The negotiations that were started in 2003 with a view to progressive shut-down of nuclear power generation were broken off in October 2004 without having reached agreement with the nuclear power companies. As soon as the breakdown of the negotiations was announced, the Government, together with the Left Party and the Centre Party, stated that Barsebaeck 2 will be closed in 2005. Sweden's climate policy is based on the Climate Strategy Act (Bill no. 2001/02:55), which was adopted by Parliament in March 2002. It is expected that trading in emission rights, in accordance with the EU Emissions Trading Directive, will start in January 2005, with publication of national emission rights allocations on 30th September 2004. One of the more important tasks

  19. Decommissioning policy in Sweden

    International Nuclear Information System (INIS)

    Bergman, C.; Boge, R.; Snihs, J.O.

    1987-01-01

    In Sweden the nuclear power program is, according to a parliamentary decision, limited to twelve power producing reactors. The last reactor shall be taken out of service no later than the year 2010. As a result of the Chernobyl accident the program for taking the reactors out of service will be accelerated. This report is the first approach by the Swedish authorities to formulate a decommissioning policy. It is not the final policy document but it discusses the principal questions from the special Swedish viewpoint. (orig.)

  20. Sweden's largest Facebook study

    OpenAIRE

    Denti, Leif; Barbopoulus, Isak; Nilsson, Ida; Holmberg, Linda; Thulin, Magdalena; Wendeblad, Malin; Andén, Lisa; Davidsson, Emelie

    2012-01-01

    The emergence of the Internet has made it easier for people to socially interact than ever before. Today, the most popular channel is Facebook with over 845 million users world wide. In Sweden, the number of users amount to approximately half of the population. We had two aims with this study. First, we investigate which areas of Facebook usage that Swedish Facebook users consider more important vis-a-vis less important. We were also interested in how users convey their persona through t... m...

  1. Decommissioning policy in Sweden

    International Nuclear Information System (INIS)

    Bergman, C.; Boge, R.; Snihs, J.O.

    1987-01-01

    In Sweden the nuclear power program is, according to a parliamentary decision, limited to twelve power producing reactors. The last reactor shall be taken out of service no later than the year 2010. As a result of the Chernobyl accident the program for taking the reactors out of service will be accelerated. The first approach by the Swedish authorities to formulate a decommissioning policy is discussed. It is not the final policy document but it discusses the principal questions from the special Swedish viewpoint

  2. A new method to characterize dopant profiles in NMOSFETs using conventional transmission electron microscopy

    International Nuclear Information System (INIS)

    Kawamura, Kazuo; Ikeda, Kazuto; Terauchi, Masami

    2004-01-01

    We have developed a new method using conventional transmission electron microscopy (TEM) to obtain two dimensional dopant profiles in silicon and applied it to 40 nm-gate-length N + /p metal oxide semiconductor field effect transistors (MOSFETs). The results are consistent with those of selective-chemically etched samples observed by TEM. This method, using focused ion beam (FIB) sample preparation and conventional TEM, has the great advantage of simple sample preparation and high spatial resolution compared to other characterization methods, such as atomic capacitance microscopy, spreading resistance microscopy, and TEM combined with selective chemical etching. This indicates that this method can be applicable to the analysis of FETs at the 65 nm or smaller node

  3. Commissioning and First Results of the Electron Beam Profiler in the Main Injector at Fermilab

    Energy Technology Data Exchange (ETDEWEB)

    Thurman-Keup, R. [Fermilab; Alvarez, M. [Fermilab; Fitzgerald, J. [Fermilab; Lundberg, C. [Fermilab; Prieto, P. [Fermilab; Zagel, J. [Fermilab; Blokland, W. [Oak Ridge

    2017-08-01

    The planned neutrino program at Fermilab requires large proton beam intensities in excess of 2 MW. Measuring the transverse profiles of these high intensity beams is challenging and often depends on non-invasive techniques. One such technique involves measuring the deflection of a probe beam of electrons with a trajectory perpendicular to the proton beam. A device such as this is already in use at the Spallation Neutron Source at ORNL and a similar device has been installed in the Main Injector at Fermilab. Commissioning of the device is in progress with the goal of having it operational by the end of the year. The status of the commissioning and initial results will be presented

  4. MGS Radio Science Electron Density Profiles: Interannual Variability and Implications for the Martian Neutral Atmosphere

    Science.gov (United States)

    Bougher, S. W.; Engel, S.; Hinson, D. P.; Murphy, J. R.

    2004-01-01

    Martian electron density profiles provided by the Mars Global Surveyor (MGS) Radio Science (RS) experiment over the 95-200 km altitude range indicate what the height of the electron peak and the longitudinal structure of the peak height are sensitive indicators of the physical state of the Mars lower and upper atmospheres. The present analysis is carried out on five sets of occultation profiles, all at high solar zenith angles (SZA). Variations spanning 2 Martian years are investigated near aphelion conditions at high northern latitudes (64.7 - 77.6 N) making use of four of these data sets. A mean ionospheric peak height of 133.5 - 135 km is obtained near SZA = 78 - 82 deg.; a corresponding mean peak density of 7.3 - 8.5 x l0(exp 4)/ qu cm is also measured during solar moderate conditions at Mars. Strong wave number 2 - 3 oscillations in peak heights are consistently observed as a function of longitude over the 2 Martian years. These observed ionospheric features are remarkably similar during aphelion conditions 1 Martian year apart. This year-to-year repeatability in the thermosphere-ionosphere structure is consistent with that observed in multiyear aphelion temperature data of the Mars lower atmosphere. Coupled Mars general circulation model (MGCM) and Mars thermospheric general circulation model (MTGCM) codes are run for Mars aphelion conditions, yielding mean and longitude variable ionospheric peak heights that reasonably match RS observations. A tidal decomposition of MTGCM thermospheric densities shows that observed ionospheric wave number 3 features are linked to a non-migrating tidal mode with semidiurnal period (sigma = 2) and zonal wave number 1 (s = -1) characteristics. The height of this photochemically determined ionospheric peak should be monitored regularly.

  5. Analysis of effects of laser profiles on fast electron generation by two-dimensional Particle-In-Cell simulations

    International Nuclear Information System (INIS)

    Hata, M.

    2010-01-01

    Complete text of publication follows. A cone-guided target is used in the Fast Ignition Realization Experiment project phase-I (FIREX-I) and optimization of its design is performed. However a laser profile is not optimized much, because the laser profile that is the best for core heating is not known well. To find that, it is useful to investigate characteristics of generated fast electrons in each condition of different laser profiles. In this research, effects of laser profiles on fast electron generation are investigated on somewhat simple conditions by two-dimensional Particle-In-Cell simulations. In these simulations, a target is made up of Au pre-plasma and Au plasma. The Au pre-plasma has the exponential profile in the x direction with the scale length L = 4.0 μm and the density from 0.10 n cr to 20 n cr . The Au plasma has the flat profile in the x direction with 10 μm width and 20 n cr . Plasma profiles are uniform in the y direction. The ionization degree and the mass number of plasmas are 40 and 197, where the ionization degree is determined by PINOCO simulations. PINOCO is a two-dimensional radiation hydrodynamics simulation code, which simulates formation of the high-density plasma during the compression phase in the fast ignition. A laser is assumed to propagate as plane wave from the negative x direction to the positive x direction. Laser profiles are supposed to be uniform in the y direction. Three different laser profiles, namely flat one with t flat = 100 fs, Gaussian one with t rise/fall = 47.0 fs and flat + Gaussian one with t rise/fall = 23.5 fs and t flat = 50 fs are used. The energy and the peak intensity are constant with E = 10 7 J/cm 2 and I L = 10 20 W/cm 2 in all cases of different laser profiles. We compare results in each condition of three different laser profiles and investigate effects of laser profiles on fast electron generation. Time-integrated energy spectra are similar in all cases of three different laser profiles. In the

  6. An analytical approach to characterize morbidity profile dissimilarity between distinct cohorts using electronic medical records.

    Science.gov (United States)

    Schildcrout, Jonathan S; Basford, Melissa A; Pulley, Jill M; Masys, Daniel R; Roden, Dan M; Wang, Deede; Chute, Christopher G; Kullo, Iftikhar J; Carrell, David; Peissig, Peggy; Kho, Abel; Denny, Joshua C

    2010-12-01

    We describe a two-stage analytical approach for characterizing morbidity profile dissimilarity among patient cohorts using electronic medical records. We capture morbidities using the International Statistical Classification of Diseases and Related Health Problems (ICD-9) codes. In the first stage of the approach separate logistic regression analyses for ICD-9 sections (e.g., "hypertensive disease" or "appendicitis") are conducted, and the odds ratios that describe adjusted differences in prevalence between two cohorts are displayed graphically. In the second stage, the results from ICD-9 section analyses are combined into a general morbidity dissimilarity index (MDI). For illustration, we examine nine cohorts of patients representing six phenotypes (or controls) derived from five institutions, each a participant in the electronic MEdical REcords and GEnomics (eMERGE) network. The phenotypes studied include type II diabetes and type II diabetes controls, peripheral arterial disease and peripheral arterial disease controls, normal cardiac conduction as measured by electrocardiography, and senile cataracts. Copyright © 2010 Elsevier Inc. All rights reserved.

  7. High resolution beam profiling of X-ray free electron laser radiation by polymer imprint development.

    Science.gov (United States)

    Rösner, Benedikt; Döring, Florian; Ribič, Primož R; Gauthier, David; Principi, Emiliano; Masciovecchio, Claudio; Zangrando, Marco; Vila-Comamala, Joan; De Ninno, Giovanni; David, Christian

    2017-11-27

    High resolution metrology of beam profiles is presently a major challenge at X-ray free electron lasers. We demonstrate a characterization method based on beam imprints in poly (methyl methacrylate). By immersing the imprints formed at 47.8 eV into organic solvents, the regions exposed to the beam are removed similar to resist development in grayscale lithography. This allows for extending the sensitivity of the method by more than an order of magnitude compared to the established analysis of imprints created solely by ablation. Applying the Beer-Lambert law for absorption, the intensity distribution in a micron-sized focus can be reconstructed from one single shot with a high dynamic range, exceeding 10 3 . The procedure described here allows for beam characterization at free electron lasers revealing even faint beam tails, which are not accessible when using ablation imprint methods. We demonstrate the greatly extended dynamic range on developed imprints taken in focus of conventional Fresnel zone plates and spiral zone plates producing beams with a topological charge.

  8. Recent measurements of electron density profiles of plasmas in PLADIS I, a plasma disruption simulator

    International Nuclear Information System (INIS)

    Bradley, J. III; Sharp, G.; Gahl, J.M. Kuznetsov, V.; Rockett, P.; Hunter, J.

    1995-01-01

    Tokamak disruption simulation experiments are being conducted at the University of New Mexico (UNM) using the PLADIS I plasma gun system. PLADIS I is a high power, high energy coaxial plasma gun configured to produce an intense plasma beam. First wall candidate materials are placed in the beam path to determine their response under disruption relevant energy densities. An optically thick vapor shield plasma has been observed to form above the target surface in PLADIS I. Various diagnostics have been used to determine the characteristics of the incident plasma and the vapor shielding plasma. The cross sectional area of the incident plasma beam is a critical characteristic, as it is used in the calculation of the incident plasma energy density. Recently, a HeNe interferometer in the Mach-Zehnder configuration has been constructed and used to probe the electron density of the incident plasma beam and vapor shield plasma. The object beam of the interferometer is scanned across the plasma beam on successive shots, yielding line integrals of beam density on different chords through the plasma. Data from the interferometer is used to determine the electron density profile of the incident plasma beam as a function of beam radius. This data is then used to calculate the effective beam area. Estimates. of beam area, obtained from other diagnostics such as damage targets, calorimeter arrays and off-axis measurements of surface pressure, will be compared with data from the interferometer to obtain a better estimate of the beam cross sectional area

  9. Q-profile evolution and improved core electron confinement in the full current drive operation on Tore Supra

    International Nuclear Information System (INIS)

    Litaudon, X.; Peysson, Y.; Aniel, T.; Huysmans, G.; Imbeaux, F.; Joffrin, E.; Lasalle, J.; Lotte, Ph.; Schunke, B.; Segui, J.; Tresset, G.; Zabiego, M.

    2000-12-01

    The formation of a core region with improved electron confinement is reported in the recent full current drive operation of Tore Supra where the plasma current is sustained with the Lower Hybrid, LH, wave. Current profile evolution and thermal electron transport coefficients are directly assessed using the data of the new fast electron Bremsstrahlung tomography that provides the most accurate determination of the LH current and power deposition profiles. The spontaneous rise of the core electron temperature observed a few seconds after the application of the LH power is ascribed to a bifurcation towards a state of reduced electron transport. The role of the magnetic shear is invoked to partly stabilize the anomalous electron turbulence. The electron temperature transition occurs when the q-profile evolves towards a non-inductive state with a non-monotonic shape i.e. when the magnetic shear is reduced close to zero in the plasma core. The improved core confinement phase is often terminated by a sudden MHD activity when the minimum q approaches two. (authors)

  10. Feminist Language Planning in Sweden

    Science.gov (United States)

    Milles, Karin

    2011-01-01

    The international literature has often described linguistic authorities as being opposed to the idea of changing language in the name of feminism. However, in Sweden, many linguistic authorities have been active agents in adopting feminist language reforms. This is probably due to Sweden's long tradition of political feminist efforts and to the…

  11. Untangling the contributions of image charge and laser profile for optimal photoemission of high-brightness electron beams

    International Nuclear Information System (INIS)

    Portman, J.; Zhang, H.; Makino, K.; Ruan, C. Y.; Berz, M.; Duxbury, P. M.

    2014-01-01

    Using our model for the simulation of photoemission of high brightness electron beams, we investigate the virtual cathode physics and the limits to spatio-temporal and spectroscopic resolution originating from the image charge on the surface and from the profile of the exciting laser pulse. By contrasting the effect of varying surface properties (leading to expanding or pinned image charge), laser profiles (Gaussian, uniform, and elliptical), and aspect ratios (pancake- and cigar-like) under different extraction field strengths and numbers of generated electrons, we quantify the effect of these experimental parameters on macroscopic pulse properties such as emittance, brightness (4D and 6D), coherence length, and energy spread. Based on our results, we outline optimal conditions of pulse generation for ultrafast electron microscope systems that take into account constraints on the number of generated electrons and on the required time resolution.

  12. Acidification research in Sweden

    International Nuclear Information System (INIS)

    Staaf, H.; Bertills, U.

    1992-01-01

    A number of acid rain research programmes have been conducted in Sweden since 1978. The total cost for these programmes has amounted to about 250 million SEK, and during this period an additional 950 million SEK has been used to finance practical countermeasures, mainly lake liming. Acid deposition has caused damage to soil, lakes, groundwater, flora and fauna, buildings and materials. The role of acid rain in causing forest damage is not yet fully elucidated. However, there is strong evidence suggesting that ongoing soil acidification and nutrient imbalances associated with it pose the major threat to Swedish forests. Current ozone levels are damaging trees on the physiological level, but the effects of ozone on forest production in unknown. Liming is an efficient means of counteracting the negative effects of acidic deposition on forest soil, lakes and watercourses. 8 refs., 6 figs., 1 tab

  13. Radwaste management in Sweden

    International Nuclear Information System (INIS)

    Ahlstroem, P.E.; Ungermark, S.

    1987-01-01

    The waste management system planned for handling the radioactive residues from Sweden's 12 nuclear power units is based on the operation of all the units up to the year 2010 in accordance with Parliament's decision to abolish nuclear power by that time. The main strategy for handling spent nuclear fuel is direct disposal without reprocessing. In the design of the radwaste management system the following fundamental principles have been applied. Short-lived waste will be disposed of as soon as possible after it has been generated. Spent fuel will be intermediately stored for about 40 years before final disposal, thereby reducing heat generation in the repository. Other long-lived waste will be disposed of jointly with the final disposal of spent fuel. 3 figs., 1 tab

  14. The profile of the electron beam in the PTB synchrotron, and its influence on radiometric measurements with synchrotron radiation

    International Nuclear Information System (INIS)

    Kaase, H.

    1976-01-01

    A simple method is described to determine the beam profile in an electron synchrotron; the measured results are compared with calculated values. Moreover, the influence of synchrotron- and betatron-oscillations on synchrotron radiation measurements is discussed, and a method is given to correct this. (orig.) [de

  15. Quantitative explanation of some electron temperature profiles measured in situ in the high latitude ionospheric E-region

    International Nuclear Information System (INIS)

    Schlegel, K.; Oyama, Koh-ichiro; Hirao, Kunio

    1983-01-01

    E region electron temperature profiles obtained with a rocket experiment in the Antarctica are compared to theoretical electron temperatures calculated from a model. The main heat source in this model is the heating of the electron gas by unstable plasma waves. Very good agreement between both temperatures is obtained between 105 and 115 km altitude, where this heating mechanism is effective. The agreement is also good below this altitude range, after a refinement of the data analysis procedure for the measured temperatures. Several important consequences of the good agreement are pointed out. (author)

  16. Nutrient Profiles and Volatile Odorous Compounds of Raw Milk After Exposure to Electron Beam Pasteurizing Doses.

    Science.gov (United States)

    Ward, Lindsay R; Kerth, Chris R; Pillai, Suresh D

    2017-07-01

    Raw milk is known to contain relatively high numbers of microorganisms, some of which include microbial pathogens. Electron beam (eBeam) processing is a nonthermal pasteurization food processing technology. The underlying hypothesis was that eBeam processing will not negatively influence the composition, nutrient content, and aroma profile of raw milk. Raw milk samples were exposed to eBeam doses of 1 and 2 kGy, since our studies had shown that 2 kGy is suitable for raw milk pasteurization. The untreated and eBeam-treated raw milk samples were analyzed to detect changes in lactose, vitamin B 2 , vitamin B 12 , and calcium concentrations. The possible breakdown of casein and whey proteins and lipid oxidation were investigated along with the formation of volatile aroma compounds. Even though vitamin B 2 showed a 31.6% decrease in concentration, the B 2 content in eBeam-pasteurized raw milk met all USDA nutritional guidelines. Even though there were no indications of lipid oxidation after the 2.0-kGy eBeam treatment, there was lipid oxidation (58%) after 7 d of refrigerated storage. However, based on the GC-olfactory analysis, the lipid oxidation did not necessarily result in the development of a wide variety of off-odors. © 2017 Institute of Food Technologists®.

  17. Application of constrained deconvolution technique for reconstruction of electron bunch profile with strongly non-Gaussian shape

    Science.gov (United States)

    Geloni, G.; Saldin, E. L.; Schneidmiller, E. A.; Yurkov, M. V.

    2004-08-01

    An effective and practical technique based on the detection of the coherent synchrotron radiation (CSR) spectrum can be used to characterize the profile function of ultra-short bunches. The CSR spectrum measurement has an important limitation: no spectral phase information is available, and the complete profile function cannot be obtained in general. In this paper we propose to use constrained deconvolution method for bunch profile reconstruction based on a priori-known information about formation of the electron bunch. Application of the method is illustrated with practically important example of a bunch formed in a single bunch-compressor. Downstream of the bunch compressor the bunch charge distribution is strongly non-Gaussian with a narrow leading peak and a long tail. The longitudinal bunch distribution is derived by measuring the bunch tail constant with a streak camera and by using a priory available information about profile function.

  18. Application of constrained deconvolution technique for reconstruction of electron bunch profile with strongly non-Gaussian shape

    International Nuclear Information System (INIS)

    Geloni, G.; Saldin, E.L.; Schneidmiller, E.A.; Yurkov, M.V.

    2004-01-01

    An effective and practical technique based on the detection of the coherent synchrotron radiation (CSR) spectrum can be used to characterize the profile function of ultra-short bunches. The CSR spectrum measurement has an important limitation: no spectral phase information is available, and the complete profile function cannot be obtained in general. In this paper we propose to use constrained deconvolution method for bunch profile reconstruction based on a priori-known information about formation of the electron bunch. Application of the method is illustrated with practically important example of a bunch formed in a single bunch-compressor. Downstream of the bunch compressor the bunch charge distribution is strongly non-Gaussian with a narrow leading peak and a long tail. The longitudinal bunch distribution is derived by measuring the bunch tail constant with a streak camera and by using a priory available information about profile function

  19. Profile correction to electron temperature and enhancement factor in soft-x-ray pulse-height-analysis measurements in tokamaks

    International Nuclear Information System (INIS)

    Sesnic, S.; Diesso, M.; Hill, K.; Holland, A.; Pohl, F.

    1988-01-01

    Because soft-x-ray pulse-height-analysis spectra contain chordal information, the electron temperature and the radiation intensity (enhancement factor) measurements do not represent the local values. The correction factors for the electron temperature and the enhancement factor as a function of the temperature and density profile parameters and the energy are obtained. The spectrum distortion due to pulse pileup effects is also evaluated. A set of curves is given from which the distortion of the spectrum can be obtained if the electron temperature, the Be filter thickness, and the electronic parameters of the acquisition system are known. PG 1810,1812 ID 131801CON N X-ray diagnostics TT Profile correction to electron temperature and enhancement factor in soft-x-ray pulse-height-analysis measurements in tokamaks AU S. Sesnic, M. Diesso, K. Hill, and A. Holland LO Princeton University, Plasma Physics Laboratory, P.O. Box 451, Princeton, New Jersey 08543 AU F. Pohl LO Max-Planck Institut fuer Plasmaphysik, 8046-Garching, Federal Republic of Germany SD (Presented on 16 March 1988) AB Because soft-x-ray pulse-height-analysis spectra contain chordal information, the electron temperature and the radiation intensity (enhancement factor) measurements do not represent the local values. The correction factors for the electron temperature and the enhancement factor as a function of the temperature and density profile parameters and the energy are obtained. The spectrum distortion due to pulse pileup effects is also evaluated. A set of curves is given from which the distortion of the spectrum can be obtained if the electron tempe

  20. Neutron Powder Diffraction in Sweden

    International Nuclear Information System (INIS)

    Tellgren, R.

    1986-01-01

    Neutron powder diffraction in Sweden has developed around the research reactor R2 in Studsvik. The article describes this facility and presents a historical review of research results obtained. It also gives some ideas of plans for future development

  1. Modeling and control of the current density profile in Tokamaks and its relation to electron transport

    International Nuclear Information System (INIS)

    Zucca, C.

    2009-04-01

    current drive schemes employed. The increase of confinement with the negative magnetic shear was observed to be gradual, but constant, and did not depend on specific values of the safety factor. Therefore, the transition from standard to improved confinement appeared to be smooth, although it can be very fast. The flexible EC system in TCV allowed us to attain strong global confinement improvement to produce eITB regimes. It also permitted us to perform transport studies on plasmas characterized by low confinement, in which we modified the magnetic shear profile, locally, around the deposition location. For instance, alternate and periodic injection of co- and counter-ECCD within the same plasma discharge has been realized on TCV, while maintaining the same amount of total input EC power. Such a heating scheme has been the basis of Swing ECCD experiments, which were initially carried out using nearly off-axis EC deposition locations in the plasma, in order to maximize the EC power absorption, and therefore the magnetic shear variation. ASTRA, interfaced with the experimental data and the CQL3D code for the computation of the EC heating and current drive sources, has again been used as a reliable tool for transport analysis and planning of new experiments. The simulations have pointed out the effects of Swing ECCD on the magnetic shear and on the electron temperature profile around the radius at which the EC waves are absorbed. Both profiles turned out to be modulated at the same frequency as the frequency of the Swing ECCD. Moreover, the maximum magnetic shear variation has been observed to be independent of the transport models used for the simulations, therefore underlying the robustness of the modeling. Additionally, the numerical results have motivated further experiments with more off-axis EC deposition, which were found roughly in agreement with recent gyrokinetic predictions, according to which, at higher positive values of the magnetic shear, an inversion of the

  2. Monitoring of the current profile by using cyclotronic electron waves in tokamaks; Controle du profil de courant par ondes cyclotroniques electroniques dans les tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Dumont, R

    2001-08-01

    The subject of this thesis is the study of the cyclotronic electron wave as a monitoring tool of the current profile. The first chapter is dedicated to basic notions concerning tokamak plasmas and current generation. The second chapter is centered on the use of fast electrons to generate current and on its modelling. The propagation and absorption of the cyclotronic electron wave require a specific polarization state whose characteristics must be carefully chosen according to some parameters of the discharge, the chapter 3 deals with this topic. The absorption of a wave in a plasma depends greatly on the velocity distribution of the particles that make up the plasma and this distribution is constantly modified by the energy of the wave, so this phenomenon is non-linear and its physical description is difficult. In a case of a fusion plasma, a sophisticated approximation called quasi-linear theory can be applied with some restrictions that are presented in chapter 4. Chapters 5 and 6 are dedicated to kinetics scenarios involving the low hybrid wave and the cyclotronic electron wave inside the plasma. Some experiments dedicated to the study of the cyclotronic electron wave have been performed in Tore-supra (France) and FTU (Italy) tokamaks, they are presented in the last chapter. (A.C.)

  3. Conversion program in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Jonsson, E.B. [Studsvik Nuclear AB, Nykoeping (Sweden)

    1997-08-01

    The conversion of the Swedish 50 MW R2 reactor from HEU to LEU fuel has been successfully accomplished over a 16 cycles long process. The conversion started in January 1991 with the introduction of 6 LEU assemblies in the 8*8 core. The first all LEU core was loaded in March 1993 and physics measurements were performed for the final licensing reports. A total of 142 LEU fuel assemblies have been irradiated up until September 1994 without any fuel incident. The operating licence for the R2 reactor was renewed in mid 1994 taking into account new fuel type. The Swedish Nuclear Inspectorate (SKI) pointed out one crucial problem with the LEU operation, that the back end of the LEU fuel cycle has not yet been solved. For the HEU fuel Sweden had the reprocessing alternative. The country is now relying heavily on the success of the USDOEs Off Site Fuels Policy to take back the spent fuel from the research reactors. They have in the meantime increased their intermediate storage facilities. There is, however, a limit both in time and space for storage of MTR-type of assemblies in water. The penalty of the lower thermal neutron flux in LEU cores has been reduced by improvements of the new irradiation rigs and by fine tuning the core calculations. The Studsvik code package, CASMO-SIMULATE, widely used for ICFM in LWRs has been modified to suit the compact MTR type of core.

  4. Uranium production in Sweden

    International Nuclear Information System (INIS)

    Bergh, S.

    1994-01-01

    The history of uranium production in Sweden is reviewed in the article. The World War II led to an exploitation of the Swedish alum shale on a large scale. In the last phase of the war it also became obvious that the shale might be used for energy production of quite another kind than oil. In 1947 AB Atom energy was founded, an enterprise with one of its purposes to extract uranium for peaceful use. A plant with a yearly capacity of 120 tons of uranium was erected at Ranstad and ready for production by 1965. From the start in Ranstad and for many years to come there was hardly any interest in an immediate large uranium production. It was decided to use the plant for studies on its more effective exploitation in case of an expansion in the future, bearing in mind the reactor programme. In the course of time economical reasons began to speak against the project. The shale seemed to have a future neither as oil nor as uranium resource. The complete termination of the work on uranium production from shale occurred in 1989

  5. Dieselization in Sweden

    International Nuclear Information System (INIS)

    Kågeson, Per

    2013-01-01

    In Sweden the market share of diesel cars grew from below 10 per cent in 2005 to 62 per cent in 2011 despite a closing gap between pump prices on diesel oil and gasoline, and diesel cars being less favored than ethanol and biogas cars in terms of tax cuts and other subsidies offered to “environment cars”. The most important factor behind the dieselization was probably the market entrance of a number of low-consuming models. Towards the end of the period a growing number of diesel models were able to meet the 120 g CO 2 threshold applicable to “environment cars” that cannot use ethanol or biogas. This helped such models increase their share of the diesel car market from zero to 41 per cent. Dieselization appears to have had only a minor effect on annual distances driven. The higher average annual mileage of diesel cars is probably to a large extent a result of a self-selection bias. However, the Swedish diesel car fleet is young, and the direct rebound effect stemming from a lower variable driving cost may show up more clearly as the fleet gets older based on the assumption that second owners are more fuel price sensitive than first owners. - Highlights: ► This paper tries to explain the fast dieselization of the new Swedish car fleet. ► It identifies changes in supply and the impact of tax benefits. ► Finally it studies the impact on the annual average mileage

  6. Nuclear power in Sweden

    International Nuclear Information System (INIS)

    Wikdahl, C.E.

    1999-01-01

    Sweden uses 16,000 kWh of electricity per person, by far the highest consumption in EU. The reason is a well-developed electricity intensive industry and a cold climate with high share of electric heating. The annual power consumption has for several years been about 140 TWh and a normal year almost 50 per cent is produced by hydro and 50 percent by nuclear. A new legislation, giving the Government the right to ordering the closure nuclear power plants of political reasons without any reference to safety, has been accepted by the Parliament. The new act, in force since January 1, 1998, is a specially tailored expropriation act. Certain rules for the economical compensation to the owner of a plant to be closed are defined in the new act. The common view in the Swedish industry is that the energy conservation methods proposed by the Government are unrealistic. During the first period of about five years the import from coal fired plants in Denmark and Germany is the only realistic alternative. Later natural gas combi units and new bioenergy plants for co-production of heat and power (CHP) might be available. (orig.) [de

  7. A compact CMA spectrometer with axially integrated hybrid electron-ion gun for ISS, AES and sputter depth profile analysis

    International Nuclear Information System (INIS)

    Gisler, E.; Bas, E.B.

    1986-01-01

    Until now, the combined application of electrons and ions in surface analysis required two separate sources for electrons and ions with different incidence angles. The newly developed hybrid electron-ion gun, however, allows bombardment of the same sample area both with noble gas ions and with electrons coming from the same direction. By integrating such a hybrid gun axially in a cylindrical mirror energy analyser (CMA) a sensitive compact single flange spectrometer obtains for ion scattering spectroscopy (ISS), Auger electron spectroscopy (AES), and sputtering all within normal beam incidence. This concept makes accurate beam centering very easy. Additionally, the bombardment from the same direction both for sputtering and for surface analysis brings advantages in depth profiling. The scattering angle for ISS has a constant value of about 138 0 . The hybrid gun delivers typically an electron beam current of -20μA at 3keV for AES, and an ion beam current of +40 nA and +1.2μA at 2 keV for ISS and sputtering respectively. The switching time between ISS, AES, and sputtering mode is about 0.1 s. So this system is best suited for automatically controlled depth profile analysis. The design and operation of this new system will be described and some applications will be discussed. (author)

  8. Self-consistent electronic structure and segregation profiles of the Cu-Ni (001) random-alloy surface

    DEFF Research Database (Denmark)

    Ruban, Andrei; Abrikosov, I. A.; Kats, D. Ya.

    1994-01-01

    We have calculated the electronic structure and segregation profiles of the (001) surface of random Cu-Ni alloys with varying bulk concentrations by means of the coherent potential approximation and the linear muffin-tin-orbitals method. Exchange and correlation were included within the local......-density approximation. Temperature effects were accounted for by means of the cluster-variation method and, for comparison, by mean-field theory. The necessary interaction parameters were calculated by the Connolly-Williams method generalized to the case of a surface of a random alloy. We find the segregation profiles...

  9. A novel approach for honey pollen profile assessment using an electronic tongue and chemometric tools

    International Nuclear Information System (INIS)

    Dias, Luís G.; Veloso, Ana C.A.; Sousa, Mara E.B.C.; Estevinho, Letícia; Machado, Adélio A.S.C.

    2015-01-01

    Nowadays the main honey producing countries require accurate labeling of honey before commercialization, including floral classification. Traditionally, this classification is made by melissopalynology analysis, an accurate but time-consuming task requiring laborious sample pre-treatment and high-skilled technicians. In this work the potential use of a potentiometric electronic tongue for pollinic assessment is evaluated, using monofloral and polyfloral honeys. The results showed that after splitting honeys according to color (white, amber and dark), the novel methodology enabled quantifying the relative percentage of the main pollens (Castanea sp., Echium sp., Erica sp., Eucaliptus sp., Lavandula sp., Prunus sp., Rubus sp. and Trifolium sp.). Multiple linear regression models were established for each type of pollen, based on the best sensors' sub-sets selected using the simulated annealing algorithm. To minimize the overfitting risk, a repeated K-fold cross-validation procedure was implemented, ensuring that at least 10–20% of the honeys were used for internal validation. With this approach, a minimum average determination coefficient of 0.91 ± 0.15 was obtained. Also, the proposed technique enabled the correct classification of 92% and 100% of monofloral and polyfloral honeys, respectively. The quite satisfactory performance of the novel procedure for quantifying the relative pollen frequency may envisage its applicability for honey labeling and geographical origin identification. Nevertheless, this approach is not a full alternative to the traditional melissopalynologic analysis; it may be seen as a practical complementary tool for preliminary honey floral classification, leaving only problematic cases for pollinic evaluation. - Highlights: • Honey's floral origin labeling is a legal requirement. • Melissopalynology analysis usually used to evaluate pollens profile is laborious. • A novel E-tongue based approach is applied to assess pollens relative

  10. A novel approach for honey pollen profile assessment using an electronic tongue and chemometric tools

    Energy Technology Data Exchange (ETDEWEB)

    Dias, Luís G., E-mail: ldias@ipb.pt [Escola Superior Agrária, Instituto Politécnico de Bragança, Campus Santa Apolónia, 5301-855 Bragança (Portugal); CQ-VR, Centro de Química – Vila Real, University of Trás-os-Montes e Alto Douro, Apartado 1013, 5001-801 Vila Real (Portugal); Veloso, Ana C.A. [Instituto Politécnico de Coimbra, ISEC, DEQB, Rua Pedro Nunes, Quinta da Nora, 3030-199 Coimbra (Portugal); CEB-Centre of Biological Engineering, University of Minho, Campus de Gualtar, 4710-057 Braga (Portugal); Sousa, Mara E.B.C.; Estevinho, Letícia [CIMO-Escola Superior Agrária, Instituto Politécnico de Bragança, Campus Santa Apolónia, 5301-855 Bragança (Portugal); Machado, Adélio A.S.C. [LAQUIPAI – Laboratório de Química Inorgânica Pura e de Aplicação Interdisciplinar, Departamento de Química, Faculdade de Ciências da, Universidade do Porto, Rua Campo Alegre n°. 687, 4169-007 Porto (Portugal); and others

    2015-11-05

    Nowadays the main honey producing countries require accurate labeling of honey before commercialization, including floral classification. Traditionally, this classification is made by melissopalynology analysis, an accurate but time-consuming task requiring laborious sample pre-treatment and high-skilled technicians. In this work the potential use of a potentiometric electronic tongue for pollinic assessment is evaluated, using monofloral and polyfloral honeys. The results showed that after splitting honeys according to color (white, amber and dark), the novel methodology enabled quantifying the relative percentage of the main pollens (Castanea sp., Echium sp., Erica sp., Eucaliptus sp., Lavandula sp., Prunus sp., Rubus sp. and Trifolium sp.). Multiple linear regression models were established for each type of pollen, based on the best sensors' sub-sets selected using the simulated annealing algorithm. To minimize the overfitting risk, a repeated K-fold cross-validation procedure was implemented, ensuring that at least 10–20% of the honeys were used for internal validation. With this approach, a minimum average determination coefficient of 0.91 ± 0.15 was obtained. Also, the proposed technique enabled the correct classification of 92% and 100% of monofloral and polyfloral honeys, respectively. The quite satisfactory performance of the novel procedure for quantifying the relative pollen frequency may envisage its applicability for honey labeling and geographical origin identification. Nevertheless, this approach is not a full alternative to the traditional melissopalynologic analysis; it may be seen as a practical complementary tool for preliminary honey floral classification, leaving only problematic cases for pollinic evaluation. - Highlights: • Honey's floral origin labeling is a legal requirement. • Melissopalynology analysis usually used to evaluate pollens profile is laborious. • A novel E-tongue based approach is applied to assess pollens

  11. Observation of the skin-like profiles of electron temperature and density of turbulently heated plasmas in the TRIAM-1 tokamak

    International Nuclear Information System (INIS)

    Hiraki, Naoji; Nakamura, Kazuo; Toi, Kazuo; Itoh, Satoshi

    1980-01-01

    The time evolution of electron temperature and density profiles are measured on the turbulent heating experiment in the TRIAM-1 tokamak. The skin-like profiles of electron temperature and density are observed just after the application of the pulsed electric field for turbulent heating. The width of the skin layer of the electron temperature profile is about 1 cm, and agrees well with the theoretical value. The above mentioned skin heating of electrons just after the heating pulse is also spectroscopically confirmed by the remarkable decrease of the volume emission of visible lines which is localized at the outer plasma region. (author)

  12. Observation of the skin-like profiles of electron temperature and density of turbulently heated plasmas in the TRIAM-1 tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Hiraki, N; Nakamura, K; Toi, K; Itoh, S [Kyushu Univ., Fukuoka (Japan). Research Inst. for Applied Mechanics

    1980-07-01

    The time evolution of electron temperature and density profiles are measured on the turbulent heating experiment in the TRIAM-1 tokamak. The skin-like profiles of electron temperature and density are observed just after the application of the pulsed electric field for turbulent heating. The width of the skin layer of the electron temperature profile is about 1 cm, and agrees well with the theoretical value. The above mentioned skin heating of electrons just after the heating pulse is also spectroscopically confirmed by the remarkable decrease of the volume emission of visible lines which is localized at the outer plasma region.

  13. Local electron mean energy profile of positive primary streamer discharge with pin-plate electrodes in oxygen—nitrogen mixtures

    International Nuclear Information System (INIS)

    Sima Wen-Xia; Peng Qing-Jun; Yang Qing; Yuan Tao; Shi Jian

    2013-01-01

    Local electron mean energy (LEME) has a direct effect on the rates of collisional ionization of molecules and atoms by electrons. Electron-impact ionization plays an important role and is the main process for the production of charged particles in a primary streamer discharge. Detailed research on the LEME profile in a primary streamer discharge is extremely important for a comprehensive understanding of the local physical mechanism of a streamer. In this study, the LEME profile of the primary streamer discharge in oxygen-nitrogen mixtures with a pin-plate gap of 0.5 cm under an impulse voltage is investigated using a fluid model. The fluid model includes the electron mean energy density equation, as well as continuity equations for electrons and ions and Poisson's electric field equation. The study finds that, except in the initial stage of the primary streamer, the LEME in the primary streamer tip tends to increase as the oxygen-nitrogen mole ratio increases and the pressure decreases. When the primary streamer bridges the gap, the LEME in the primary streamer channel is smaller than the first ionization energies of oxygen and nitrogen. The LEME in the primary streamer channel then decreases as the oxygen-nitrogen mole ratio increases and the pressure increases. The LEME in the primary streamer tip is primarily dependent on the reduced electric field with mole ratios of oxygen-nitrogen given in the oxygen-nitrogen mixtures. (physics of gases, plasmas, and electric discharges)

  14. Mitigation of the electron-cloud effect in the PSR and SNS protonstorage rings by tailoring the bunch profile

    CERN Document Server

    Pivi, M T

    2003-01-01

    For the storage ring of the Spallation Neutron Source (SNS) at Oak Ridge, and for the Proton Storage Ring (PSR) at Los Alamos, both with intense and very long bunches, the electron cloud develops primarily by the mechanism of trailing-edge multipacting. We show, by means of simulations for the PSR, how the resonant nature of this mechanism may be effectively broken by tailoring the longitudinal bunch profile at fixed bunch charge, resulting in a significant decrease in the electron-cloud effect. We briefly discuss the experimental difficulties expected in the implementation of this cure.

  15. MITIGATION OF THE ELECTRON-CLOUD EFFECT IN THE PSR AND SNS PROTONSTORAGE RINGS BY TAILORING THE BUNCH PROFILE

    International Nuclear Information System (INIS)

    Pivi, Mauro T F

    2003-01-01

    For the storage ring of the Spallation Neutron Source (SNS) at Oak Ridge, and for the Proton Storage Ring (PSR) at Los Alamos, both with intense and very long bunches, the electron cloud develops primarily by the mechanism of trailing-edge multipacting. We show, by means of simulations for the PSR, how the resonant nature of this mechanism may be effectively broken by tailoring the longitudinal bunch profile at fixed bunch charge, resulting in a significant decrease in the electron-cloud effect. We briefly discuss the experimental difficulties expected in the implementation of this cure

  16. Modification of the Current Profile in DIII-D by Off-Axis Electron Cyclotron Current Drive

    International Nuclear Information System (INIS)

    Luce, T.C.; Lin-Liu, Y.R.; Harvey, R.W.; Giruzzi, G.; Lohr, J.M.; Petty, C.C.; Politzer, P.A.; Prater; Rice, B.W.

    1999-01-01

    Localized non-inductive currents due to electron cyclotron wave absorption have been measured on the DIII-D tokamak. Clear evidence of the non-inductive currents is seen on the internal magnetic field measurements by motional Stark effect spectroscopy. The magnitude and location of the non-inductive current is evaluated by comparing the total and Ohmic current profiles of discharges with and without electron cyclotron wave power. The measured current agrees with Fokker-Planck calculations near the magnetic axis, but exceeds the predicted value as the location of the current drive is moved to the half radius

  17. Interpretation of ion flux and electron temperature profiles at the JET divertor target during high recycling and detached discharges

    International Nuclear Information System (INIS)

    Monk, R.D.

    1997-01-01

    Detailed experiments have been carried out with the JET Mark I pumped divertor to characterise high recycling and detached plasma regimes. This paper presents new measurements of high resolution divertor ion flux profiles that identify the growth of additional peaks during high recycling discharges. These ion flux profiles are used in conjunction with Dα and neutral flux measurements to examine the physics of divertor detachment and compare against simple analytic models. Finally, problems are highlighted with conventional methods of single and triple probe interpretation under high recycling conditions. By assuming that the single probe behaves as an asymmetric double probe the whole characteristic may be fitted and significantly lower electron temperatures may be derived when the electron to ion saturation current ratio is reduced. The results from the asymmetric double probe fit are shown to be consistent with independent diagnostic measurements. (orig.)

  18. High-Latitude Topside Ionospheric Vertical Electron-Density-Profile Changes in Response to Large Magnetic Storms

    Science.gov (United States)

    Benson, Robert F.; Fainberg, Joseph; Osherovich, Vladimir A.; Truhlik, Vladimir; Wang, Yongli; Bilitza, Dieter; Fung, Shing F.

    2015-01-01

    Large magnetic-storm induced changes have been detected in high-latitude topside vertical electron-density profiles Ne(h). The investigation was based on the large database of topside Ne(h) profiles and digital topside ionograms from the International Satellites for Ionospheric Studies (ISIS) program available from the NASA Space Physics Data Facility (SPDF) at http://spdf.gsfc.nasa.gov/isis/isis-status.html. This large database enabled Ne(h) profiles to be obtained when an ISIS satellite passed through nearly the same region of space before, during, and after a major magnetic storm. A major goal was to relate the magnetic-storm induced high-latitude Ne(h) profile changes to solar-wind parameters. Thus an additional data constraint was to consider only storms where solar-wind data were available from the NASA/SPDF OMNIWeb database. Ten large magnetic storms (with Dst less than -100 nT) were identified that satisfied both the Ne(h) profile and the solar-wind data constraints. During five of these storms topside ionospheric Ne(h) profiles were available in the high-latitude northern hemisphere and during the other five storms similar ionospheric data were available in the southern hemisphere. Large Ne(h) changes were observed during each one of these storms. Our concentration in this paper is on the northern hemisphere. The data coverage was best for the northern-hemisphere winter. Here Ne(h) profile enhancements were always observed when the magnetic local time (MLT) was between 00 and 03 and Ne(h) profile depletions were always observed between 08 and 10 MLT. The observed Ne(h) deviations were compared with solar-wind parameters, with appropriate time shifts, for four storms.

  19. Compton profiles and electronic structure of HgBr{sub 2} and HgI{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, G.; Dashora, Alpa [Department of Physics, University College of Science, M.L. Sukhadia University, Udaipur, 313001 Rajasthan (India); Sharma, M. [Physics Division, State Forensic Science Laboratory, Jaipur, 302016 Rajasthan (India); Ahuja, B.L. [Department of Physics, University College of Science, M.L. Sukhadia University, Udaipur, 313001 Rajasthan (India)], E-mail: blahuja@yahoo.com

    2010-02-15

    In this paper, we present the first-ever experimental Compton line shapes of HgBr{sub 2} and HgI{sub 2} using {sup 137}Cs Compton spectrometer. To compare our experimental momentum densities, we have computed the Compton profiles using Hartree-Fock and density functional theory within linear combination of atomic orbitals. We have also computed the energy bands and density of states using the linear combination of atomic orbitals and full potential linearized augmented plane wave method. On the basis of equal-valence-electron-density profiles, it is seen that HgI{sub 2} is more covalent than HgBr{sub 2} which is in agreement with the valence charge densities. The experimental isotropic profiles are found to be relatively in better agreement with the Hartree-Fock data. We have also discussed the photoluminescence and detection properties of both the halides.

  20. Role of substituents on the reactivity and electron density profile of ...

    Indian Academy of Sciences (India)

    In addition, the possible strength of interaction of these ligands ... The measure of some important electronic properties such as .... contributes to the lowering of the total binding energy ... ties like ionization energies and electron affinities, etc.

  1. Density and temperature profile modifications with electron cyclotron power injection in quiescent double barrier discharges on DIII-D

    International Nuclear Information System (INIS)

    Casper, T A; Burrell, K H; Doyle, E J; Gohil, P; Lasnier, C J; Leonard, A W; Moller, J M; Osborne, T H; Snyder, P B; Thomas, D M; Weiland, J; West, W P

    2006-01-01

    Quiescent double barrier (QDB) conditions often form when an internal transport barrier is created with high-power neutral-beam injection into a quiescent H-mode (QH) plasma. These QH-modes offer an attractive, high-performance operating scenario for burning plasma experiments due to their quasi-stationarity and lack of edge localized modes. Our initial experiments and modelling using ECH/ECCD in QDB shots were designed to control the current profile and, indeed, we have observed a strong dependence on the q-profile when EC-power is used inside the core transport barrier region. While strong electron heating is observed with EC power injection, we also observe a drop in the other core parameters, namely ion temperature and rotation, electron density and impurity concentration. At onset and termination of the EC pulse, dynamically changing conditions are induced that provide a rapid evolution of T e /T i profiles accessible with 0.3 e /T i ) axis e /T i ratio as the ion temperature and density profiles flatten with this change in transport. The change in transport is consistent with a destabilization of ITG turbulence as inferred from the reduction of the stability threshold due to the change in T e /T i

  2. Silicon diodes as an alternative to diamond detectors for depth dose curves and profile measurements of photon and electron radiation.

    Science.gov (United States)

    Scherf, Christian; Peter, Christiane; Moog, Jussi; Licher, Jörg; Kara, Eugen; Zink, Klemens; Rödel, Claus; Ramm, Ulla

    2009-08-01

    Depth dose curves and lateral dose profiles should correspond to relative dose to water in any measured point, what can be more or less satisfied with different detectors. Diamond as detector material has similar dosimetric properties like water. Silicon diodes and ionization chambers are also commonly used to acquire dose profiles. The authors compared dose profiles measured in an MP3 water phantom with a diamond detector 60003, unshielded and shielded silicon diodes 60008 and 60012 and a 0.125-cm(3) thimble chamber 233642 (PTW, Freiburg, Germany) for 6- and 25-MV photons. Electron beams of 6, 12 and 18 MeV were investigated with the diamond detector, the unshielded diode and a Markus chamber 23343. The unshielded diode revealed relative dose differences at the water surface below +10% for 6-MV and +4% for 25-MV photons compared to the diamond data. These values decreased to less than 1% within the first millimeters of water depth. The shielded diode was only required to obtain correct data of the fall-off zones for photon beams larger than 10 x 10 cm(2) because of important contributions of low-energy scattered photons. For electron radiation the largest relative dose difference of -2% was observed with the unshielded silicon diode for 6 MeV within the build-up zone. Spatial resolutions were always best with the small voluminous silicon diodes. Relative dose profiles obtained with the two silicon diodes have the same degree of accuracy as with the diamond detector.

  3. Women and energy in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Rising, Agneta [Vattenfall - Swedish State Power Board (Sweden)

    1989-07-01

    Sweden is currently facing a new situation In energy politics. Nuclear power is to be phased out nd replaced by new energy sources and by more effective use of electricity. This will be a great change for the whole society as nuclear power today is giving half of electricity. And Sweden is a high-consumption- country, in fact looking at the top list of electricity consumption per capita in the world, you will find Sweden on the fourth plate. In general- women know less than men about the relation between energy, technology, environment and economy. This knowledge is required If women re to Influence the choice of future energy supplies of Sweden. It is with this background the project 'Women and Energy' has been started. Important decisions are to be made within their fairly immediate future with major consequences for Sweden's coming development. These decisions have until now often been made by men, but now it Is the hope of Vattenfall that women will be able to influence these decisions. So that all of 'nuclear people' may share responsibility the path that has been chosen.

  4. Women and energy in Sweden

    International Nuclear Information System (INIS)

    Rising, Agneta

    1989-01-01

    Sweden is currently facing a new situation In energy politics. Nuclear power is to be phased out nd replaced by new energy sources and by more effective use of electricity. This will be a great change for the whole society as nuclear power today is giving half of electricity. And Sweden is a high-consumption- country, in fact looking at the top list of electricity consumption per capita in the world, you will find Sweden on the fourth plate. In general- women know less than men about the relation between energy, technology, environment and economy. This knowledge is required If women re to Influence the choice of future energy supplies of Sweden. It is with this background the project 'Women and Energy' has been started. Important decisions are to be made within their fairly immediate future with major consequences for Sweden's coming development. These decisions have until now often been made by men, but now it Is the hope of Vattenfall that women will be able to influence these decisions. So that all of 'nuclear people' may share responsibility the path that has been chosen

  5. New developments in electron microscopy for serial image acquisition of neuronal profiles.

    Science.gov (United States)

    Kubota, Yoshiyuki

    2015-02-01

    Recent developments in electron microscopy largely automate the continuous acquisition of serial electron micrographs (EMGs), previously achieved by laborious manual serial ultrathin sectioning using an ultramicrotome and ultrastructural image capture process with transmission electron microscopy. The new systems cut thin sections and capture serial EMGs automatically, allowing for acquisition of large data sets in a reasonably short time. The new methods are focused ion beam/scanning electron microscopy, ultramicrotome/serial block-face scanning electron microscopy, automated tape-collection ultramicrotome/scanning electron microscopy and transmission electron microscope camera array. In this review, their positive and negative aspects are discussed. © The Author 2015. Published by Oxford University Press on behalf of The Japanese Society of Microscopy. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  6. Time integrated x-ray measurments of the very energetic electron end loss profile in TMX-U

    International Nuclear Information System (INIS)

    Osher, J.E.; Fabyan, J.

    1984-01-01

    The time-integrated 2-D profile of the thick-target bremsstrahlung produced by energetic end loss electrons has been measured during ECRH operation of TMX-U. Sheets of x-ray film and/or arrays of thermoluminescent dosimeters were placed on the outside of the end tank end wall to measure the relative spatial x-ray profile, with locally added filters of Pb to determine the effective mean x-ray energy. The purpose of this simple survey diagnostic was to allow deduction of the gross features of the ECRH region. The electron source functions needed to fit the x-ray data were modeled for various anchor cell radial distributions mapped along magnetic field lines to the elliptical plasma potential control plates or the Al end walls. The data are generally consistent with (1) major ECR heating in the central 25-cm-diam core, (2) a mean ECRH electron loss energy of 420 keV, and (3) an ECRH coupling efficiency to these hot electrons of greater than or equal to 10%

  7. Control of quasi-monoenergetic electron beams from laser-plasma accelerators with adjustable shock density profile

    Science.gov (United States)

    Tsai, Hai-En; Swanson, Kelly K.; Barber, Sam K.; Lehe, Remi; Mao, Hann-Shin; Mittelberger, Daniel E.; Steinke, Sven; Nakamura, Kei; van Tilborg, Jeroen; Schroeder, Carl; Esarey, Eric; Geddes, Cameron G. R.; Leemans, Wim

    2018-04-01

    The injection physics in a shock-induced density down-ramp injector was characterized, demonstrating precise control of a laser-plasma accelerator (LPA). Using a jet-blade assembly, experiments systematically varied the shock injector profile, including shock angle, shock position, up-ramp width, and acceleration length. Our work demonstrates that beam energy, energy spread, and pointing can be controlled by adjusting these parameters. As a result, an electron beam that was highly tunable from 25 to 300 MeV with 8% energy spread (ΔEFWHM/E), 1.5 mrad divergence, and 0.35 mrad pointing fluctuation was produced. Particle-in-cell simulation characterized how variation in the shock angle and up-ramp width impacted the injection process. This highly controllable LPA represents a suitable, compact electron beam source for LPA applications such as Thomson sources and free-electron lasers.

  8. Policies promoting Biofuels in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Holmgren, Kristina [IVL Swedish Environmental Research Inst., Goeteborg (Sweden); Chalmers Univ. of Technology, Div. of Heat and Power Technology., Goeteborg (Sweden)

    2012-07-01

    This report was written as part of a course in Environmental Economics and Policy Instruments at the University of Gothenburg. It aims at summarizing the policy instruments introduced to directly affect the production and use of biofuels in Sweden. Since Sweden is part of the EU also EU policies were included. There are additional policy instruments which affect the production and utilization of biofuels in a more indirect way that are not presented here. The economic analysis in this paper is limited and could be developed from the information presented in order to draw further conclusions on necessary changes in order to reach set targets.

  9. A study of the profile of the E3 electron trap in GaAs

    Energy Technology Data Exchange (ETDEWEB)

    Kourkoutas, C.D. (TEI Athens (Greece). Dept. of Physics Chemistry and Material Technology); Kovacs, B.; Szentpali, B.; Somogyi, K. (Research Inst. for Technical Physics, Budapest (Hungary)); Euthymiou, P.C. (Athens Univ. (Greece)); Giakoumakis, G.E. (Ioannina Univ. (Greece). Dept. of Physics)

    1994-01-01

    Electron irradiation at room temperature introduces in GaAs a donor type electronic state Tx at 0.18 eV, which is associated with the E3 electron trap. The presence of Tx is observed at depths d > 1.5 [mu]m, which correspond to the limits of the depletion region under the highest applied reverse bias voltage, while the E3 trap concentration drops off into the same region. (author).

  10. A study of the profile of the E3 electron trap in GaAs

    International Nuclear Information System (INIS)

    Kourkoutas, C.D.; Euthymiou, P.C.; Giakoumakis, G.E.

    1994-01-01

    Electron irradiation at room temperature introduces in GaAs a donor type electronic state Tx at 0.18 eV, which is associated with the E3 electron trap. The presence of Tx is observed at depths d > 1.5 μm, which correspond to the limits of the depletion region under the highest applied reverse bias voltage, while the E3 trap concentration drops off into the same region. (author)

  11. Child Care in Sweden. Fact Sheets on Sweden.

    Science.gov (United States)

    Swedish Inst., Stockholm.

    This fact sheet outlines Sweden's policies of government-supported child care and parental insurance provisions. Swedish families receive: (1) free maternity and child health care; (2) child allowances for each child of 9,000 krona per year through age 16; (3) up to 450 days of paid parental leave for the birth of a child, with 360 days paid at 90…

  12. Room temperature Compton profiles of conduction electrons in α-Ga ...

    Indian Academy of Sciences (India)

    Room temperature Compton profiles of momentum distribution of conduction electrons in -Ga metal are calculated in band model. For this purpose, the conduction electron wave functions are determined in a temperature-dependent non-local model potential. The profiles calculated along the crystallographic directions, ...

  13. Foreign Language Learning in Sweden.

    Science.gov (United States)

    Orpet, Brian R.

    1984-01-01

    Describes a visit made to Sweden to ascertain why Swedish citizens speak such excellent English. Motivation was a key factor. Describes observations of the methods of teaching English as a second language in Swedish schools. Makes recommendations for foreign language teaching in Great Britain based on these observations. (SED)

  14. Comparison of collisional radiative models for edge electron density reconstruction from Li I (2s-2p) emission profiles

    Energy Technology Data Exchange (ETDEWEB)

    Stoschus, H.; Hudson, B.; Munoz Burgos, J. M. [Oak Ridge Institute for Science and Education, Oak Ridge, Tennessee 37831-0117 (United States); Thomas, D. M. [General Atomics, San Diego, California 92186-5608 (United States); Schweinzer, J. [Max-Planck-Institut fuer Plasmaphysik, Euratom Association, 85748 Garching (Germany)

    2012-10-15

    Four collisional radiative models (CRMs) for reconstruction of the edge electron density profile from the measured Li I (2s-2p) emission profile of an accelerated lithium beam are compared using experimental data from DIII-D. It is shown for both L- and H-mode plasmas that edge density profiles reconstructed with the CRMs DDD2, ABSOLUT, [Sasaki et al. Rev. Sci. Instrum. 64, 1699 (1993)] and a new model developed at DIII-D agree in a density scan from n{sub e}{sup ped}= (2.0-6.5) Multiplication-Sign 10{sup 19} m{sup -3} within 20%, 20%, <5%, and 40%, respectively, of the pedestal density measured with Thomson scattering. Profile shape and absolute density vary in a scan of the effective ion charge Z{sub eff}= 1-6 up to a factor of two but agree with Thomson data for Z{sub eff}= 1-2 within the error bars.

  15. Volatile aroma components and MS-based electronic nose profiles of dogfruit (Pithecellobium jiringa and stink bean (Parkia speciosa

    Directory of Open Access Journals (Sweden)

    Yonathan Asikin

    2018-01-01

    Full Text Available Dogfruit (Pithecellobium jiringa and stink bean (Parkia speciosa are two typical smelly legumes from Southeast Asia that are widely used in the cuisines of this region. Headspace/gas chromatography/flame ionization detection analysis and mass spectrometry (MS-based electronic nose techniques were applied to monitor ripening changes in the volatile flavor profiles of dogfruit and stink bean. Compositional analysis showed that the ripening process greatly influenced the composition and content of the volatile aroma profiles of these two smelly food materials, particularly their alcohol, aldehyde, and sulfur components. The quantity of predominant hexanal in stink bean significantly declined (P < 0.05 during the ripening process, whereas the major volatile components of dogfruit changed from 3-methylbutanal and methanol in the unripe state to acetaldehyde and ethanol in the ripe bean. Moreover, the amount of the typical volatile flavor compound 1,2,4-trithiolane significantly increased (P < 0.05 in both ripened dogfruit and stink bean from 1.70 and 0.93%, to relative amounts of 19.97 and 13.66%, respectively. MS-based nose profiling gave further detailed differentiation of the volatile profiles of dogfruit and stink bean of various ripening stages through multivariate statistical analysis, and provided discriminant ion masses, such as m/z 41, 43, 58, 78, and 124, as valuable “digital fingerprint” dataset that can be used for fast flavor monitoring of smelly food resources.

  16. The energy transition in Sweden

    International Nuclear Information System (INIS)

    Cruciani, Michel

    2016-06-01

    Sweden has the distinction of having started several major changes to its energy supply at an early stage. The country has no fossil reserves, and so was importing increasing volumes of oil products in the years following World War II. Yet it rapidly perceived the geopolitical risks generated by such oil dependency, and so developed its nuclear capacity, enabling it to reduce quickly the role of oil in its economy after the shocks of the 1970's. Sweden has also managed to exploit its natural resources. Until the 2000's, hydropower was able to enter the market without public assistance. By contrast, wood could not have gained its current market share without a policy combining public aid for investment and penalties for competing energies. The severe economic crisis which hit the country between 1991 and 1993 led such penalties being converted into taxes, notably a tax on CO_2 emissions that came into force in 1991. This helped Sweden reconstruct its tax system, to finance its social model. The challenge highlighted the country's ability to generate consensus policy guidelines. One of these guidelines was to react immediately after initial warnings about climate change. Sweden first strengthened its energy efficiency policy, structuring field actions through a national agency backed up by partner organizations in local communities to help consumers - individuals or industries - technically and economically. Sweden then adopted an unusual instrument to promote renewable electricity, namely its system of green certificates. Implemented in 2003, this system has spurred the development of the cheapest sources of renewable energy, two-thirds coming from onshore wind and one third from biomass. The cost of this support still remains remarkably moderate today. At the end of 2014, Sweden thus only used fossil fuels to provide 30% of its primary energy supplies, while renewables accounted for 52% of final energy consumption. Energy consumption per capita remains high, but

  17. Measurement of lower-hybrid-driven current profile by Abel inversion of electron-cyclotron wave transmission spectra

    International Nuclear Information System (INIS)

    Fidone, I.; Giruzzi, G.; Caron, X.; Meyer, R.L.

    1991-01-01

    A method for measuring the radial profile of the lower-hybrid-driven current in a low-density tokamak plasma using electron-cyclotron wave attenuation is discussed. This diagnostic scheme is reminiscent of the transmission interferometry approach, commonly used in tokamaks to measure the plasma density, but now the wave amplitude instead of the phase is measured. Wave attenuation of the ordinary mode at ω p much-lt ω c along vertical chords is measured; at these frequencies, the waves are absorbed by the superthermal tail sustained by lower-hybrid waves and the local wave absorption coefficient is proportional to the noninductive current density. The radial profile of this current is obtained from Abel inversion. An application to the Tore Supra tokamak is presented

  18. Measurement of current drive profile using electron cyclotron wave attenuation near the O-mode cut-off

    International Nuclear Information System (INIS)

    Fidone, I.

    1991-01-01

    A method for determining the radial profile of the lower-hybrid current drive in tokamaks uing electron-cyclotron attenuation of the O-mode for frequencies ω near the cut-off frequency is discussed. The basic idea is that for a given wave frequency, the cut-off plays the role of a spatial filter selecting a variable portion of the non-inductive current. It is shown that the incremental attenuation resulting from a small increase of ω displays specific features related to the current density near the cut-off point. Using the relation between the wave damping and the current density it is possible to determine the radial profile of the current drive from the wave attenuation measurements. A numerical application is also presented for plasma parameters in the reactor regime

  19. Efficient analysis of mode profiles in elliptical microcavity using dynamic-thermal electron-quantum medium FDTD method.

    Science.gov (United States)

    Khoo, E H; Ahmed, I; Goh, R S M; Lee, K H; Hung, T G G; Li, E P

    2013-03-11

    The dynamic-thermal electron-quantum medium finite-difference time-domain (DTEQM-FDTD) method is used for efficient analysis of mode profile in elliptical microcavity. The resonance peak of the elliptical microcavity is studied by varying the length ratio. It is observed that at some length ratios, cavity mode is excited instead of whispering gallery mode. This depicts that mode profiles are length ratio dependent. Through the implementation of the DTEQM-FDTD on graphic processing unit (GPU), the simulation time is reduced by 300 times as compared to the CPU. This leads to an efficient optimization approach to design microcavity lasers for wide range of applications in photonic integrated circuits.

  20. Generation and characterization of electron bunches with ramped current profiles in a dual-frequency superconducting linear accelerator.

    Science.gov (United States)

    Piot, P; Behrens, C; Gerth, C; Dohlus, M; Lemery, F; Mihalcea, D; Stoltz, P; Vogt, M

    2012-01-20

    We report on the successful experimental generation of electron bunches with ramped current profiles. The technique relies on impressing nonlinear correlations in the longitudinal phase space using a superconducing radio frequency linear accelerator operating at two frequencies and a current-enhancing dispersive section. The produced ~700-MeV bunches have peak currents of the order of a kilo-Ampère. Data taken for various accelerator settings demonstrate the versatility of the method and, in particular, its ability to produce current profiles that have a quasilinear dependency on the longitudinal (temporal) coordinate. The measured bunch parameters are shown, via numerical simulations, to produce gigavolt-per-meter peak accelerating electric fields with transformer ratios larger than 2 in dielectric-lined waveguides. © 2012 American Physical Society

  1. Silicon diodes as an alternative to diamond detectors for depth dose curves and profile measurements of photon and electron radiation

    International Nuclear Information System (INIS)

    Scherf, Christian; Moog, Jussi; Licher, Joerg; Kara, Eugen; Roedel, Claus; Ramm, Ulla; Peter, Christiane; Zink, Klemens

    2009-01-01

    Background: Depth dose curves and lateral dose profiles should correspond to relative dose to water in any measured point, what can be more or less satisfied with different detectors. Diamond as detector material has similar dosimetric properties like water. Silicon diodes and ionization chambers are also commonly used to acquire dose profiles. Material and Methods: The authors compared dose profiles measured in an MP3 water phantom with a diamond detector 60003, unshielded and shielded silicon diodes 60008 and 60012 and a 0.125-cm 3 thimble chamber 233642 (PTW, Freiburg, Germany) for 6- and 25-MV photons. Electron beams of 6, 12 and 18 MeV were investigated with the diamond detector, the unshielded diode and a Markus chamber 23343. Results: The unshielded diode revealed relative dose differences at the water surface below +10% for 6-MV and +4% for 25-MV photons compared to the diamond data. These values decreased to less than 1% within the first millimeters of water depth. The shielded diode was only required to obtain correct data of the fall-off zones for photon beams larger than 10 x 10 cm 2 because of important contributions of low-energy scattered photons. For electron radiation the largest relative dose difference of -2% was observed with the unshielded silicon diode for 6 MeV within the build-up zone. Spatial resolutions were always best with the small voluminous silicon diodes. Conclusion: Relative dose profiles obtained with the two silicon diodes have the same degree of accuracy as with the diamond detector. (orig.)

  2. Mission-profile based multi-objective optimization of power electronics converter for wind turbines

    DEFF Research Database (Denmark)

    Gohil, Ghanshyamsinh; Teodorescu, Remus; Kerekes, Tamas

    2017-01-01

    -objective optimization approach for designing power converter is presented. The objective is to minimize the energy loss for a given load profile as against the conventional approach of minimizing power loss at specific loading conditions. The proposed approach is illustrated by designing a grid-side power converter...

  3. Room temperature Compton profiles of conduction electrons in α-Ga ...

    Indian Academy of Sciences (India)

    B P PANDA and N C MOHAPATRA*. Department of Physics, Chikiti Mahavidyalaya, Chikiti 761 010, India. £Department of Physics, Berhampur University, Berhampur 760 007, India. Email: ncmphy123@hotmail.com. MS received 18 January 2003; accepted 21 June 2003. Abstract. Room temperature Compton profiles of ...

  4. Z-Slicer: A Scheme for Shaping the Electron Beam Profile in a Linac

    Energy Technology Data Exchange (ETDEWEB)

    Thangaraj, J. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Crawford, D. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Broemmelsiek, D. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Thurman-Keup, R. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Baffes, C. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Wortley, W. [Univ. of Rochester, NY (United States)

    2014-01-01

    A train of short bunches ( 100 fs) are at a premium at accelerator facilities and their applications include terahertz (THz) generation, short bunch diagnostics, advanced accelerator R&D, etc. In this work we report on the design and simulation of an experiment involving a 20 MeV electron beam, that will be intercepted by a set of metallic slits inside a bunch compressor. After the mask, some electrons are scattered while other pass through unaffected. After exiting the bunch compressor, those electrons that were not affected by the slits will appear as short electron bunches. The key advantage of our scheme is its simplicity, tunability and low cost. The scheme does not require any additional hardware such as lasers, undulator, or transverse deflecting cavity. The tuning variable is only the RF-chirp. The detection of the bunching requires just a skew quad in the chicane and a transverse screen downstream.

  5. Mitigation of the electron-cloud effect in the PSR and SNS proton storage rings by tailoring the bunch profile

    International Nuclear Information System (INIS)

    Pivi, M.; Furman, M.A.

    2003-01-01

    For the storage ring of the Spallation Neutron Source(SNS) at Oak Ridge, and for the Proton Storage Ring (PSR) at Los Alamos, both with intense and very long bunches, the electroncloud develops primarily by the mechanism of trailing-edge multipacting. We show, by means of simulations for the PSR, how the resonant nature of this mechanism may be effectively broken by tailoring the longitudinal bunch profile at fixed bunch charge, resulting in a significant decrease in the electron-cloud effect. We briefly discuss the experimental difficulties expected in the implementation of this cure

  6. Determination of dislocation density by electron backscatter diffraction and X-ray line profile analysis in ferrous lath martensite

    International Nuclear Information System (INIS)

    Berecz, Tibor; Jenei, Péter; Csóré, András; Lábár, János; Gubicza, Jenő

    2016-01-01

    The microstructure and the dislocation density in as-quenched ferrous lath martensite were studied by different methods. The blocks, packets and variants formed due to martensitic transformation were identified and their sizes were determined by electron backscatter diffraction (EBSD). Concomitant transmission electron microscopy (TEM) investigation revealed that the laths contain subgrains with the size between 50 and 100 nm. A novel evaluation procedure of EBSD images was elaborated for the determination of the density and the space distribution of geometrically necessary dislocations from the misorientation distribution. The total dislocation density obtained by X-ray diffraction line profile analysis was in good agreement with the value determined by EBSD, indicating that the majority of dislocations formed due to martensitic transformation during quenching are geometrically necessary dislocations.

  7. Molecular dynamics with phase-shift-based electronic stopping for calibration of ion implantation profiles in crystalline silicon

    International Nuclear Information System (INIS)

    Chan, H.Y.; Nordlund, K.; Gossmann, H.-J.L.; Harris, M.; Montgomery, N.J.; Mulcahy, C.P.A.; Biswas, S.; Srinivasan, M.P.; Benistant, F.; Ng, C.M.; Chan, Lap

    2006-01-01

    Prediction of the final dopant positions after ion implantation has always been strongly influenced by the choice of stopping models. A molecular dynamics (MD) method is used in this work; the nuclear stopping is treated by accurate pair potentials calculated by density functional theory (DFT). The slowing down due to collisions with electrons will be described by both a non-local semi-empirical model and a local model based on Fermi level phase shift factors. Comparisons with experimental data using both models show that a local pair-specific electronic stopping model is essential in accurately predicting range profiles for any element even at low implant energies where nuclear effects are dominant

  8. Reduced model prediction of electron temperature profiles in microtearing-dominated National Spherical Torus eXperiment plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Kaye, S. M., E-mail: skaye@pppl.gov; Guttenfelder, W.; Bell, R. E.; Gerhardt, S. P.; LeBlanc, B. P.; Maingi, R. [Princeton Plasma Physics Laboratory, Princeton University, Princeton, New Jersey 08543 (United States)

    2014-08-15

    A representative H-mode discharge from the National Spherical Torus eXperiment is studied in detail to utilize it as a basis for a time-evolving prediction of the electron temperature profile using an appropriate reduced transport model. The time evolution of characteristic plasma variables such as β{sub e}, ν{sub e}{sup ∗}, the MHD α parameter, and the gradient scale lengths of T{sub e}, T{sub i}, and n{sub e} were examined as a prelude to performing linear gyrokinetic calculations to determine the fastest growing micro instability at various times and locations throughout the discharge. The inferences from the parameter evolutions and the linear stability calculations were consistent. Early in the discharge, when β{sub e} and ν{sub e}{sup ∗} were relatively low, ballooning parity modes were dominant. As time progressed and both β{sub e} and ν{sub e}{sup ∗} increased, microtearing became the dominant low-k{sub θ} mode, especially in the outer half of the plasma. There are instances in time and radius, however, where other modes, at higher-k{sub θ}, may, in addition to microtearing, be important for driving electron transport. Given these results, the Rebut-Lallia-Watkins (RLW) electron thermal diffusivity model, which is based on microtearing-induced transport, was used to predict the time-evolving electron temperature across most of the profile. The results indicate that RLW does a good job of predicting T{sub e} for times and locations where microtearing was determined to be important, but not as well when microtearing was predicted to be stable or subdominant.

  9. Spatial profiles of electron and metastable atom densities in positive polarity fast ionization waves sustained in helium

    International Nuclear Information System (INIS)

    Weatherford, Brandon R.; Barnat, E. V.; Xiong, Zhongmin; Kushner, Mark J.

    2014-01-01

    Fast ionization waves (FIWs), often generated with high voltage pulses over nanosecond timescales, are able to produce large volumes of ions and excited states at moderate pressures. The mechanisms of FIW propagation were experimentally and computationally investigated to provide insights into the manner in which these large volumes are excited. The two-dimensional structure of electron and metastable densities produced by short-pulse FIWs sustained in helium were measured using laser-induced fluorescence and laser collision-induced fluorescence diagnostics for times of 100–120 ns after the pulse, as the pressure was varied from 1 to 20 Torr. A trend of center-peaked to volume-filling to wall-peaked electron density profiles was observed as the pressure was increased. Instantaneous FIW velocities, obtained from plasma-induced emission, ranged from 0.1 to 3 × 10 9  cm s −1 , depending on distance from the high voltage electrode and pressure. Predictions from two-dimensional modeling of the propagation of a single FIW correlated well with the experimental trends in electron density profiles and wave velocity. Results from the model show that the maximum ionization rate occurs in the wavefront, and the discharge continues to propagate forward after the removal of high voltage from the powered electrode due to the potential energy stored in the space charge. As the pressure is varied, the radial distribution of the ionization rate is shaped by changes in the electron mean free path, and subsequent localized electric field enhancement at the walls or on the centerline of the discharge.

  10. Determination of the time evolution of the electron-temperature profile of reactor-like plasmas from the measurement of blackbody electron-cyclotron emission

    International Nuclear Information System (INIS)

    Efthimion, P.C.; Arunasalam, V.; Bitzer, R.A.; Hosea, J.C.

    1982-04-01

    Plasma characteristics (i.e., n/sub e/ greater than or equal to 1 x 10 13 cm -3 , T/sub e/ greater than or equal to 10 7 0 K, B/sub psi/ greater than or equal to 20 kG) in present and future magnetically confined plasma devices, e.g., Princeton Large Torus (PLT) and Tokamak Fusion Test Reactor (TFTR), meet the conditions for blackbody emission near the electron cyclotron frequency and at few harmonics. These conditions, derived from the hot plasma dielectric tensor, have been verified by propagation experiments on PLT and the Princeton Model-C Stellarator. Blackbody emission near the fundamental electron cyclotron frequency and the second harmonic have been observed in PLT and is routinely measured to ascertain the time evolution of the electron temperature profile. These measurements are especially valuable in the study of auxiliary heating of tokamak plasma. Measurement and calibration techniques will also be discussed with special emphasis on our fast-scanning heterodyne receiver concept

  11. Heterodyne radiometer for the measurement of the electron temperature profile on TdeV

    International Nuclear Information System (INIS)

    Pinsonneault, D.; Quirion, B.; Hubbard, A.; Glaude, V.; Legros, C.

    1993-01-01

    In the following sections an overview of the basic physical considerations are presented. We then briefly describe the instrument and present the design and construction of the two calibration standards in more detail. We also discuss the calibration procedures using these sources which permit the derivation of T e independent of the other diagnostics. Finally, a comparison of T e (R) profiles obtained with the three measurement system will be presented. (orig.)

  12. Antipsychotic treatment dosing profile in patients with schizophrenia evaluated with electronic monitoring (MEMS®).

    Science.gov (United States)

    Acosta, Francisco J; Ramallo-Fariña, Yolanda; Bosch, Esperanza; Mayans, Teresa; Rodríguez, Carlos J; Caravaca, Ana

    2013-05-01

    Although the Medication Event Monitoring System (MEMS®) device offers accurate information on treatment dosing profile, such profile has never been studied in patients with schizophrenia. Enhancing our knowledge on this issue would help in developing intervention strategies to improve adherence to antipsychotic treatment in these patients. 74 outpatients with schizophrenia were monitored with the MEMS device for a 3-month period, for evaluation of antipsychotic treatment dosing profile, possible influence of medication schedule-related variables, adherence to treatment--considering dose intake within prescribed timeframes--and possible Hawthorne's effect of using the MEMS device. Dose-omission gaps occurred in 18.7% of monitoring days, most frequently during weekends, almost significantly. Almost one-third of prescribed doses were taken out of prescribed time. Neither the prescribed number of daily doses nor the indicated time of the day for dose intake (breakfast, dinner), were associated with correct antipsychotic dosing. Excess-dose was rare in general, and more frequent out of prescribed dose timeframe. No Hawthorne's effect was found for the MEMS device. Adherence reached only 35% according to a definition that included dose intake within prescribed timeframes. Antipsychotic treatment dosing was considerably irregular among patients with schizophrenia. Strategies to reduce dose-omission gaps and increase dosing within prescribed timeframes seem to be necessary. Gaining knowledge on precise oral antipsychotic dosing profiles or the influence of schedule-related variables may be useful to design strategies towards enhancing adherence. There appears to be no Hawthorne's effect associated with the use of MEMS devices in outpatients with schizophrenia. Copyright © 2013 Elsevier B.V. All rights reserved.

  13. Elemental depth profiles and plasma etching rates of positive-tone electron beam resists after sequential infiltration synthesis of alumina

    Science.gov (United States)

    Ozaki, Yuki; Ito, Shunya; Hiroshiba, Nobuya; Nakamura, Takahiro; Nakagawa, Masaru

    2018-06-01

    By scanning transmission electron microscopy and energy dispersive X-ray spectroscopy (STEM–EDS), we investigated the elemental depth profiles of organic electron beam resist films after the sequential infiltration synthesis (SIS) of inorganic alumina. Although a 40-nm-thick poly(methyl methacrylate) (PMMA) film was entirely hybridized with alumina, an uneven distribution was observed near the interface between the substrate and the resist as well as near the resist surface. The uneven distribution was observed around the center of a 100-nm-thick PMMA film. The thicknesses of the PMMA and CSAR62 resist films decreased almost linearly as functions of plasma etching period. The comparison of etching rate among oxygen reactive ion etching, C3F8 reactive ion beam etching (RIBE), and Ar ion beam milling suggested that the SIS treatment enhanced the etching resistance of the electron beam resists to chemical reactions rather than to ion collisions. We proposed oxygen- and Ar-assisted C3F8 RIBE for the fabrication of silica imprint molds by electron beam lithography.

  14. A New Inversion Routine to Produce Vertical Electron-Density Profiles from Ionospheric Topside-Sounder Data

    Science.gov (United States)

    Wang, Yongli; Benson, Robert F.

    2011-01-01

    Two software applications have been produced specifically for the analysis of some million digital topside ionograms produced by a recent analog-to-digital conversion effort of selected analog telemetry tapes from the Alouette-2, ISIS-1 and ISIS-2 satellites. One, TOPIST (TOPside Ionogram Scalar with True-height algorithm) from the University of Massachusetts Lowell, is designed for the automatic identification of the topside-ionogram ionospheric-reflection traces and their inversion into vertical electron-density profiles Ne(h). TOPIST also has the capability of manual intervention. The other application, from the Goddard Space Flight Center based on the FORTRAN code of John E. Jackson from the 1960s, is designed as an IDL-based interactive program for the scaling of selected digital topside-sounder ionograms. The Jackson code has also been modified, with some effort, so as to run on modern computers. This modification was motivated by the need to scale selected ionograms from the millions of Alouette/ISIS topside-sounder ionograms that only exist on 35-mm film. During this modification, it became evident that it would be more efficient to design a new code, based on the capabilities of present-day computers, than to continue to modify the old code. Such a new code has been produced and here we will describe its capabilities and compare Ne(h) profiles produced from it with those produced by the Jackson code. The concept of the new code is to assume an initial Ne(h) and derive a final Ne(h) through an iteration process that makes the resulting apparent-height profile fir the scaled values within a certain error range. The new code can be used on the X-, O-, and Z-mode traces. It does not assume any predefined profile shape between two contiguous points, like the exponential rule used in Jackson s program. Instead, Monotone Piecewise Cubic Interpolation is applied in the global profile to keep the monotone nature of the profile, which also ensures better smoothness

  15. Electronic band gap and transport in graphene superlattice with a Gaussian profile potential voltage

    International Nuclear Information System (INIS)

    Zhang Yu-Ping; Yin Yi-Heng; Lü Huan-Huan; Zhang Hui-Yun

    2014-01-01

    We study the electronic properties for the graphene-based one-dimensional superlattices, whose potential voltages vary according to the envelope of a Gaussian function. It is found that an unusual Dirac point exists and its location is exactly associated with a zero-averaged wave number (zero-k-bar ) gap. This zero-k-bar gap is less sensitive to incident angle and lattice constants, properties opposing those of Bragg gap. The defect mode appearing inside the zero-k-bar gap has an effect on transmission, conductance, and shot noise, which will be useful for further investigation. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

  16. Measurements of Electron Density Profiles of Plasmas Produced by Nike KrF Laser for Laser Plasma Instability (LPI) Research

    Science.gov (United States)

    Oh, Jaechul; Weaver, J. L.; Obenschain, S. P.; Schmitt, A. J.; Kehne, D. M.; Karasik, M.; Chan, L.-Y.; Serlin, V.; Phillips, L.

    2013-10-01

    Knowing spatial profiles of electron density (ne) in the underdense coronal region (n Nike LPI experiment, a side-on grid imaging refractometer (GIR) was deployed for measuring the underdense plasma profiles. Plasmas were produced from flat CH targets illuminated by Nike KrF laser with total energies up to 1 kJ of 0.5 ~ 1 nsec FWHM pulses. The GIR resolved ne up to 3 ×1021 /cm3 in space taking 2D snapshot images of probe laser (λ = 263 nm, Δt = 10 ps) beamlets (50 μm spacing) refracted by the plasma at a selected time during the laser illumination. The individual beamlet transmittances were also measured for Te estimation. Time-resolved spectrometers with an absolute-intensity-calibrated photodiode array and a streak camera simultaneously detected light emission from the plasma in spectral ranges relevant to Raman (SRS) and two plasmon decay instabilities. The measured spatial profiles are compared with simulation results from the FAST3D radiation hydrocode and their effects on the LPI observations are investigated. Work supported by DoE/NNSA and performed at Naval Research Laboratory.

  17. Improving electronic customers' profile in recommender systems using data mining techniques

    Directory of Open Access Journals (Sweden)

    Mohammad Julashokri

    2011-10-01

    Full Text Available Recommender systems are tools for realization one to one marketing. Recommender systems are systems, which attract, retain, and develop customers. Recommender systems use several ways to make recommendations. Two ways are using more than the others: collaborative filtering and content-based filtering. In this study, a recommender system model based on collaborative filtering has proposed. Proposed model was endeavored to improve the customer profile in collaborative systems to enhance the recommender system efficiency. This improvement was done using time context and group preferences. Experimental results show that the proposed model has a better recommendation performance than existing models.

  18. Cult sites in northern Sweden

    Directory of Open Access Journals (Sweden)

    Stefan Brink

    1990-01-01

    Full Text Available The pagan cult in northern Sweden, i.e, Norrland, has for some decades been a neglected chapter in our history, a situation which unfortunately applies to Sweden as a whole, at least where onomastics are concerned. The aim is thus to deliver an overview of the evidence that we have of pre-Christian religious activities in these northern parts — in this aspect, onomastic material is nearly almost all we have got — and some general remarks about the conversion to the new Christian religion. The area of investigation is what in the (Swedish medieval period was known as Norrland. In other words, the part of Sweden considered here is modern Central Norrland. With our state of knowledge of today it is not so easy to pick out the place-names that have denoted some kind of pagan cult activity. The place-name material can be divided into: 1. Theoforic place-names 2. place-names denoting the site of a pagan cult, which do not however contain theoforic elements 3. place-names with a possible pagan cultic element.

  19. Improving the Automatic Inversion of Digital Alouette/ISIS Ionogram Reflection Traces into Topside Electron Density Profiles

    Science.gov (United States)

    Benson, Robert F.; Truhlik, Vladimir; Huang, Xueqin; Wang, Yongli; Bilitza, Dieter

    2012-01-01

    The topside sounders of the International Satellites for Ionospheric Studies (ISIS) program were designed as analog systems. The resulting ionograms were displayed on 35 mm film for analysis by visual inspection. Each of these satellites, launched between 1962 and 1971, produced data for 10 to 20 years. A number of the original telemetry tapes from this large data set have been converted directly into digital records. Software, known as the Topside Ionogram Scalar With True-Height (TOPIST) algorithm, has been produced and used for the automatic inversion of the ionogram reflection traces on more than 100,000 ISIS-2 digital topside ionograms into topside vertical electron density profiles Ne(h). Here we present some topside ionospheric solar cycle variations deduced from the TOPIST database to illustrate the scientific benefit of improving and expanding the topside ionospheric Ne(h) database. The profile improvements will be based on improvements in the TOPIST software motivated by direct comparisons between TOPIST profiles and profiles produced by manual scaling in the early days of the ISIS program. The database expansion will be based on new software designed to overcome limitations in the original digital topside ionogram database caused by difficulties encountered during the analog-to-digital conversion process in the detection of the ionogram frame sync pulse and/or the frequency markers. This improved and expanded TOPIST topside Ne(h) database will greatly enhance investigations into both short- and long-term ionospheric changes, e.g., the observed topside ionospheric responses to magnetic storms, induced by interplanetary magnetic clouds, and solar cycle variations, respectively.

  20. Energy Foresight - Sweden in Europe

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    The IVA-project 'Energy Foresight - Sweden in Europe' deals with possibilities and problems associated with our energy future. We take it for granted that various forms of energy will always be available for a multitude of purposes and at acceptable prices. Sweden also places high demands on health and environmental protection issues when it comes to the production of power and heat. During the last few years the climate issue has been highlighted, which in turn will change the conditions for the use of alternative sources of energy. Carbon dioxide is the most important of the greenhouse gases, and it is closely associated with the burning of coal, oil, and natural gas. These fossil fuels play dominant roles in the world 's energy supply. Far-reaching measures to decrease carbon dioxide emissions will thus greatly affect the ways in which we use fossil fuels and non-carbon dioxide generating sources of energy. We have chosen a global starting point for our energy study. From there we will zoom in on the energy systems of Europe and Sweden. The climate issue demands global approach. Deregulation of electricity and gas markets, and the development of integrated European systems related to these energy sources, requires an international perspective on he Swedish energy system. Our project differs from earlier governmental energy studies in the sense that we are not trying to present the most likely, nor the most desirable energy future. Instead we have opted to draw up some illustrations of Sweden's future energy system, with Europe as a backdrop. The climate issue differentiates the scenarios. Our time perspective is 20 years, with glimpses 50 years ahead. On the 18th of February 2003, the Steering Group of Energy Foresight - Sweden in Europe, presented it's final report. The bulk of the work has been done in four panels. Their reflections and conclusions are presented in separate panel reports. The 12 factual reports present different

  1. Energy Foresight - Sweden in Europe

    International Nuclear Information System (INIS)

    2003-01-01

    The IVA-project 'Energy Foresight - Sweden in Europe' deals with possibilities and problems associated with our energy future. We take it for granted that various forms of energy will always be available for a multitude of purposes and at acceptable prices. Sweden also places high demands on health and environmental protection issues when it comes to the production of power and heat. During the last few years the climate issue has been highlighted, which in turn will change the conditions for the use of alternative sources of energy. Carbon dioxide is the most important of the greenhouse gases, and it is closely associated with the burning of coal, oil, and natural gas. These fossil fuels play dominant roles in the world 's energy supply. Far-reaching measures to decrease carbon dioxide emissions will thus greatly affect the ways in which we use fossil fuels and non-carbon dioxide generating sources of energy. We have chosen a global starting point for our energy study. From there we will zoom in on the energy systems of Europe and Sweden. The climate issue demands global approach. Deregulation of electricity and gas markets, and the development of integrated European systems related to these energy sources, requires an international perspective on he Swedish energy system. Our project differs from earlier governmental energy studies in the sense that we are not trying to present the most likely, nor the most desirable energy future. Instead we have opted to draw up some illustrations of Sweden's future energy system, with Europe as a backdrop. The climate issue differentiates the scenarios. Our time perspective is 20 years, with glimpses 50 years ahead. On the 18th of February 2003, the Steering Group of Energy Foresight - Sweden in Europe, presented it's final report. The bulk of the work has been done in four panels. Their reflections and conclusions are presented in separate panel reports. The 12 factual reports present different sources of energy, how hey are

  2. Positron depth profiling of the structural and electronic structure transformations of hydrogenated Mg-based thin films

    Science.gov (United States)

    Eijt, S. W. H.; Kind, R.; Singh, S.; Schut, H.; Legerstee, W. J.; Hendrikx, R. W. A.; Svetchnikov, V. L.; Westerwaal, R. J.; Dam, B.

    2009-02-01

    We report positron depth-profiling studies on the hydrogen sorption behavior and phase evolution of Mg-based thin films. We show that the main changes in the depth profiles resulting from the hydrogenation to the respective metal hydrides are related to a clear broadening in the observed electron momentum densities in both Mg and Mg2Ni films. This shows that positron annihilation methods are capable of monitoring these metal-to-insulator transitions, which form the basis for important applications of these types of films in switchable mirror devices and hydrogen sensors in a depth-sensitive manner. Besides, some of the positrons trap at the boundaries of columnar grains in the otherwise nearly vacancy-free Mg films. The combination of positron annihilation and x-ray diffraction further shows that hydrogen loading at elevated temperatures, in the range of 480-600 K, leads to a clear Pd-Mg alloy formation of the Pd catalyst cap layer. At the highest temperatures, the hydrogenation induces a partial delamination of the ˜5 nm thin capping layer, as sensitively monitored by positron depth profiling of the fraction of ortho-positronium formed at interface with the cap layer. The delamination effectively blocks the hydrogen cycling. In Mg-Si bilayers, we investigated the reactivity upon hydrogen loading and heat treatments near 480 K, which shows that Mg2Si formation is fast relative to MgH2. The combination of positron depth profiling and transmission electron microscopy shows that hydrogenation promotes a complete conversion to Mg2Si for this destabilized metal hydride system, while a partially unreacted, Mg-rich amorphous prelayer remains on top of Mg2Si after a single heat treatment in an inert gas environment. Thin film studies indicate that the difficulty of rehydrogenation of Mg2Si is not primarily the result from slow hydrogen dissociation at surfaces, but is likely hindered by the presence of a barrier for removal of Mg from the readily formed Mg2Si.

  3. Study of profile control and suprathermal electron production with lower hybrid waves

    International Nuclear Information System (INIS)

    Soeldner, F.X.; Brambilla, M.; Leuterer, F.; Muenich, M.

    1986-05-01

    In this study the coupling of LH waves to suprathermal electrons, the LH current drive efficiency and the mechanism for sawtooth stabilisation will be discussed. A wide data base has been obtained by the LH experiments on Alcator C, ASDEX, FT; JFT-2M, JIPPT-IIU, Petula, PLT, Versator, WT II during the last years and important aspects as the scaling of global current drive efficiency are satisfactorily described by theory. We mainly rely here on experimental results from ASDEX and comparison with theoretical calculations by Fisch and Karney. (orig.)

  4. A Comparative Proteome Profile of Female Mouse Gonads Suggests a Tight Link between the Electron Transport Chain and Meiosis Initiation.

    Science.gov (United States)

    Shen, Cong; Li, Mingrui; Zhang, Pan; Guo, Yueshuai; Zhang, Hao; Zheng, Bo; Teng, Hui; Zhou, Tao; Guo, Xuejiang; Huo, Ran

    2018-01-01

    Generation of haploid gametes by meiosis is a unique property of germ cells and is critical for sexual reproduction. Leaving mitosis and entering meiosis is a key step in germ cell development. Several inducers or intrinsic genes are known to be important for meiotic initiation, but the regulation of meiotic initiation, especially at the protein level, is still not well understood. We constructed a comparative proteome profile of female mouse fetal gonads at specific time points (11.5, 12.5, and 13.5 days post coitum), spanning a critical window for initiation of meiosis in female germ cells. We identified 3666 proteins, of which 473 were differentially expressed. Further bioinformatics analysis showed that these differentially expressed proteins were enriched in the mitochondria, especially in the electron transport chain and, notably, 9 proteins in electron transport chain Complex I were differentially expressed. We disrupted the mitochondrial electron transport chain function by adding the complex I inhibitor, rotenone to 11.5 days post coitum female gonads cultured in vitro. This treatment resulted in a decreased proportion of meiotic germ cells, as assessed by staining for histone γH2AX. Rotenone treatment also caused decreased ATP levels, increased reactive oxygen species levels and failure of the germ cells to undergo premeiotic DNA replication. These effects were partially rescued by adding Coenzyme Q10. Taken together, our results suggested that a functional electron transport chain is important for meiosis initiation. Our characterization of the quantitative proteome of female gonads provides an inventory of proteins, useful for understanding the mechanisms of meiosis initiation and female fertility. © 2018 by The American Society for Biochemistry and Molecular Biology, Inc.

  5. Electronic structure computation and differential capacitance profile in δ-doped FET as a function of hydrostatic pressure

    Energy Technology Data Exchange (ETDEWEB)

    Carlos-Pinedo, C.; Rodríguez-Vargas, I.; Martínez-Orozco, J. C. [Unidad Académica de Física. Universidad Autónoma de Zacatecas. Calzada Solidaridad Esquina con Paseo la Bufa S/N. C.P. 98060, Zacatecas, Zac. (Mexico)

    2014-05-15

    In this work we present the results obtained from the calculation of the level structure of a n-type delta-doped well Field Effect Transistor when is subjected to hydrostatic pressure. We study the energy level structure as a function of hydrostatic pressure within the range of 0 to 6 kbar for different Schottky barrier height (SBH). We use an analytical expression for the effect of hydrostatic pressure on the SBH and the pressure dependence of the basic parameters of the system as the effective mass m(P) and the dielectric constant ε(P) of GaAs. We found that due to the effects of hydrostatic pressure, in addition to electronic level structure alteration, the profile of the differential capacitance per unit area C{sup −2} is affected.

  6. Electronic structure computation and differential capacitance profile in δ-doped FET as a function of hydrostatic pressure

    International Nuclear Information System (INIS)

    Carlos-Pinedo, C.; Rodríguez-Vargas, I.; Martínez-Orozco, J. C.

    2014-01-01

    In this work we present the results obtained from the calculation of the level structure of a n-type delta-doped well Field Effect Transistor when is subjected to hydrostatic pressure. We study the energy level structure as a function of hydrostatic pressure within the range of 0 to 6 kbar for different Schottky barrier height (SBH). We use an analytical expression for the effect of hydrostatic pressure on the SBH and the pressure dependence of the basic parameters of the system as the effective mass m(P) and the dielectric constant ε(P) of GaAs. We found that due to the effects of hydrostatic pressure, in addition to electronic level structure alteration, the profile of the differential capacitance per unit area C −2 is affected

  7. The history of tuberculosis management in Sweden.

    Science.gov (United States)

    Wallstedt, Helen; Maeurer, Markus

    2015-03-01

    We review the history of TB in Sweden beginning in 1800, when 25% of mortality in Sweden was associated with TB. The Royal Family was involved in establishing dedicated sanatoria in Sweden to offer better diagnostics and clinical care. TB has declined in Sweden steadily, with some recent increases due to local spread of TB and challenging international and national socio-economical structures. Improved research and clinical knowledge is needed to diagnose and manage drug-susceptible as well as drug-resistant TB. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  8. The History of Tuberculosis Management in Sweden

    Directory of Open Access Journals (Sweden)

    Helen Wallstedt

    2015-03-01

    Full Text Available We review the history of TB in Sweden beginning in 1800, when 25% of mortality in Sweden was associated with TB. The Royal Family was involved in establishing dedicated sanatoria in Sweden to offer better diagnostics and clinical care. TB has declined in Sweden steadily, with some recent increases due to local spread of TB and challenging international and national socio-economical structures. Improved research and clinical knowledge is needed to diagnose and manage drug-susceptible as well as drug-resistant TB.

  9. Profile measurements of localized fast electrons and ions in TORE SUPRA

    International Nuclear Information System (INIS)

    Basiuk, V.; Roubin, J.P.; Becoulet, A.; Carrasco, J.; Martin, G.; Moreau, D.; Saoutic, B.

    1992-01-01

    The strong toroidal and poloidal anisotropy of the heat flux to the first wall of Tore Supra during additional heating has been related to suprathermal particle losses induced by the TF ripple. In this paper we describe a new system of electric collectors designed to diagnose these localized particles and we analyse measurements performed during LHCD, ICRH and NBI heating. The interaction of fast particles created by additional heating with the TF ripple perturbation in Tore Supra has been analyzed by a direct measurement of the localized particles. The good confinement region has been identified thanks to a peak in the measured current profiles and is in agreement with theory. During LHCD and ICRH, the global losses are weak but strongly anisotropic leading to hot spots at the wall. During ICRH, an ejection of fast ions by the sawteeth towards peripheral zones where they get lost in the ripple has been seen. This is a possible scenario of α particle losses in a reactor

  10. Global proteomic profiling of phosphopeptides using electron transfer dissociation tandem mass spectrometry

    DEFF Research Database (Denmark)

    Molina, Henrik; Horn, David M; Tang, Ning

    2007-01-01

    Electron transfer dissociation (ETD) is a recently introduced mass spectrometric technique that provides a more comprehensive coverage of peptide sequences and posttranslational modifications. Here, we evaluated the use of ETD for a global phosphoproteome analysis. In all, we identified a total...... of 1,435 phosphorylation sites from human embryonic kidney 293T cells, of which 1,141 ( approximately 80%) were not previously described. A detailed comparison of ETD and collision-induced dissociation (CID) modes showed that ETD identified 60% more phosphopeptides than CID, with an average of 40% more...... fragment ions that facilitated localization of phosphorylation sites. Although our data indicate that ETD is superior to CID for phosphorylation analysis, the two methods can be effectively combined in alternating ETD and CID modes for a more comprehensive analysis. Combining ETD and CID, from this single...

  11. Modeling of temperature profiles in an environmental transmission electron microscope using computational fluid dynamics

    DEFF Research Database (Denmark)

    Mortensen, Peter Mølgaard; Jensen, Anker Degn; Hansen, Thomas Willum

    2015-01-01

    The temperature and velocity field, pressure distribution, and the temperature variation across the sample region inside an environmental transmission electron microscope (ETEM) have been modeled by means of computational fluid dynamics (CFD). Heating the sample area by a furnace type TEM holder...... gives rise to temperature gradients over the sample area. Three major mechanisms have been identified with respect to heat transfer in the sample area: radiation from the grid, conduction in the grid, and conduction in the gas. A parameter sensitivity analysis showed that the sample temperature...... was affected by the conductivity of the gas, the emissivity of the sample grid, and the conductivity of the grid. Ideally the grid should be polished and made from a material with good conductivity, e.g. copper. With hydrogen gas, which has the highest conductivity of the gases studied, the temperature...

  12. Improving the Automatic Inversion of Digital ISIS-2 Ionogram Reflection Traces into Topside Vertical Electron-Density Profiles

    Science.gov (United States)

    Benson, R. F.; Truhlik, V.; Huang, X.; Wang, Y.; Bilitza, D.

    2011-01-01

    The topside-sounders on the four satellites of the International Satellites for Ionospheric Studies (ISIS) program were designed as analog systems. The resulting ionograms were displayed on 35-mm film for analysis by visual inspection. Each of these satellites, launched between 1962 and 1971, produced data for 10 to 20 years. A number of the original telemetry tapes from this large data set have been converted directly into digital records. Software, known as the TOPside Ionogram Scalar with True-height (TOPIST) algorithm has been produced that enables the automatic inversion of ISIS-2 ionogram reflection traces into topside vertical electron-density profiles Ne(h). More than million digital Alouette/ISIS topside ionograms have been produced and over 300,000 are from ISIS 2. Many of these ISIS-2 ionograms correspond to a passive mode of operation for the detection of natural radio emissions and thus do not contain ionospheric reflection traces. TOPIST, however, is not able to produce Ne(h) profiles from all of the ISIS-2 ionograms with reflection traces because some of them did not contain frequency information. This information was missing due to difficulties encountered during the analog-to-digital conversion process in the detection of the ionogram frame-sync pulse and/or the frequency markers. Of the many digital topside ionograms that TOPIST was able to process, over 200 were found where direct comparisons could be made with Ne(h) profiles that were produced by manual scaling in the early days of the ISIS program. While many of these comparisons indicated excellent agreement (inversion process: (1) improve the quality of the digital ionogram database by remedying the missing frequency-information problem when possible, and (2) using the above-mentioned comparisons as teaching examples of how to improve the original TOPIST software.

  13. Cadmium in Sweden - environmental risks

    Energy Technology Data Exchange (ETDEWEB)

    Parkman, H; Iverfeldt, Aa [Swedish Environmental Research Inst. (Sweden); Borg, H; Lithner, G [Stockholm Univ. (Sweden). Inst. for Applied Environmental Research

    1998-03-01

    This report aims at assessing possible effects of cadmium in the Swedish environment. Swedish soils and soft freshwater systems are, due to a generally poor buffering capacity, severely affected by acidification. In addition, the low salinity in the Baltic Sea imply a naturally poor organism structure, with some important organisms living close to their limit of physiological tolerance. Cadmium in soils is mobilized at low pH, and the availability and toxicity of cadmium in marine systems are enhanced at low salinity. The Swedish environment is therefore extra vulnerable to cadmium pollution. The average concentrations of cadmium in the forest mor layers, agricultural soils, and fresh-waters in Sweden are enhanced compared to `back-ground concentrations`, with a general increasing trend from the north to the south-west, indicating strong impact of atmospheric deposition of cadmium originating from the central parts of Europe. In Swedish sea water, total cadmium concentrations, and the fraction of bio-available `free` cadmium, generally increases with decreasing salinity. Decreased emissions of cadmium to the environment have led to decreasing atmospheric deposition during the last decade. The net accumulation of cadmium in the forest mor layer has stopped, and even started to decrease. In northern Sweden, this is due to the decreased deposition, but in southern Sweden the main reason is increased leakage of cadmium from the topsoil as a consequence of acidification. As a result, cadmium in the Swedish environments is undergoing an extended redistribution between different soil compartments, and from the soils to the aquatic systems. 90 refs, 23 figs, 2 tabs. With 3 page summary in Swedish

  14. Sub-millisecond electron density profile measurement at the JET tokamak with the fast lithium beam emission spectroscopy system

    Science.gov (United States)

    Réfy, D. I.; Brix, M.; Gomes, R.; Tál, B.; Zoletnik, S.; Dunai, D.; Kocsis, G.; Kálvin, S.; Szabolics, T.; JET Contributors

    2018-04-01

    Diagnostic alkali atom (e.g., lithium) beams are routinely used to diagnose magnetically confined plasmas, namely, to measure the plasma electron density profile in the edge and the scrape off layer region. A light splitting optics system was installed into the observation system of the lithium beam emission spectroscopy diagnostic at the Joint European Torus (JET) tokamak, which allows simultaneous measurement of the beam light emission with a spectrometer and a fast avalanche photodiode (APD) camera. The spectrometer measurement allows density profile reconstruction with ˜10 ms time resolution, absolute position calculation from the Doppler shift, spectral background subtraction as well as relative intensity calibration of the channels for each discharge. The APD system is capable of measuring light intensities on the microsecond time scale. However ˜100 μs integration is needed to have an acceptable signal to noise ratio due to moderate light levels. Fast modulation of the beam up to 30 kHz is implemented which allows background subtraction on the 100 μs time scale. The measurement covers the 0.9 background subtraction, the relative calibration, and the comprehensive error calculation, runs a Bayesian density reconstruction code, and loads results to the JET database. The paper demonstrates the capability of the APD system by analyzing fast phenomena like pellet injection and edge localized modes.

  15. Edge electron density profiles and fluctuations measured by two-dimensional beam emission spectroscopy in the KSTAR

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Y. U., E-mail: yunam@nfri.re.kr; Wi, H. M. [National Fusion Research Institute, Daejeon (Korea, Republic of); Zoletnik, S.; Lampert, M. [Wigner RCP Institute for Particle and Nuclear Physics, Budapest (Hungary); Kovácsik, Ákos [Institute of Nuclear Techniques, Budapest Technical University, Budapest (Hungary)

    2014-11-15

    Beam emission spectroscopy (BES) system in Korea Superconducting Tokamak Advanced Research (KSTAR) has recently been upgraded. The background intensity was reduced from 30% to 2% by suppressing the stray lights. This allows acquisition of the relative electron density profiles on the plasma edge without background subtraction from the beam power modulation signals. The KSTAR BES system has its spatial resolution of 1 cm, the temporal resolution of 2 MHz, and a total 32 channel (8 radial × 4 poloidal) avalanche photo diode array. Most measurements were done on the plasma edge, r/a ∼ 0.9, with 8 cm radial measurement width that covers the pedestal range. High speed density profile measurements reveal temporal behaviors of fast transient events, such as the precursors of edge localized modes and the transitions between confinement modes. Low background level also allows analysis of the edge density fluctuation patterns with reduced background fluctuations. Propagation of the density structures can be investigated by comparing the phase delays between the spatially distributed channels.

  16. Joint refinement model for the spin resolved one-electron reduced density matrix of YTiO3 using magnetic structure factors and magnetic Compton profiles data.

    Science.gov (United States)

    Gueddida, Saber; Yan, Zeyin; Kibalin, Iurii; Voufack, Ariste Bolivard; Claiser, Nicolas; Souhassou, Mohamed; Lecomte, Claude; Gillon, Béatrice; Gillet, Jean-Michel

    2018-04-28

    In this paper, we propose a simple cluster model with limited basis sets to reproduce the unpaired electron distributions in a YTiO 3 ferromagnetic crystal. The spin-resolved one-electron-reduced density matrix is reconstructed simultaneously from theoretical magnetic structure factors and directional magnetic Compton profiles using our joint refinement algorithm. This algorithm is guided by the rescaling of basis functions and the adjustment of the spin population matrix. The resulting spin electron density in both position and momentum spaces from the joint refinement model is in agreement with theoretical and experimental results. Benefits brought from magnetic Compton profiles to the entire spin density matrix are illustrated. We studied the magnetic properties of the YTiO 3 crystal along the Ti-O 1 -Ti bonding. We found that the basis functions are mostly rescaled by means of magnetic Compton profiles, while the molecular occupation numbers are mainly modified by the magnetic structure factors.

  17. Assessment of a Standardized ROS Production Profile in Humans by Electron Paramagnetic Resonance

    Directory of Open Access Journals (Sweden)

    Simona Mrakic-Sposta

    2012-01-01

    Full Text Available Despite the growing interest in the role of reactive oxygen species (ROS in health and disease, reliable quantitative noninvasive methods for the assessment of oxidative stress in humans are still lacking. EPR technique, coupled to a specific spin probe (CMH: 1-hydroxy-3-methoxycarbonyl-2,2,5,5-tetramethylpyrrolidine is here presented as the method of choice to gain a direct measurement of ROS in biological fluids and tissues. The study aimed at demonstrating that, differently from currently available “a posteriori” assays of ROS-induced damage by means of biomolecules (e.g., proteins and lipids spin-trapping EPR provides direct evidence of the “instantaneous” presence of radical species in the sample and, as signal areas are proportional to the number of excited electron spins, lead to absolute concentration levels. Using a recently developed bench top continuous wave system (e-scan EPR scanner, Bruker dealing with very low ROS concentration levels in small (50 μL samples, we successfully monitored rapid ROS production changes in peripheral blood of athletes after controlled exercise and sedentary subjects after antioxidant supplementation. The correlation between EPR results and data obtained by various enzymatic assays (e.g., protein carbonyls and thiobarbituric acid reactive substances was determined too. Synthetically, our method allows reliable, quick, noninvasive quantitative determination of ROS in human peripheral blood.

  18. Modeling of temperature profiles in an environmental transmission electron microscope using computational fluid dynamics

    International Nuclear Information System (INIS)

    Mølgaard Mortensen, Peter; Willum Hansen, Thomas; Birkedal Wagner, Jakob; Degn Jensen, Anker

    2015-01-01

    The temperature and velocity field, pressure distribution, and the temperature variation across the sample region inside an environmental transmission electron microscope (ETEM) have been modeled by means of computational fluid dynamics (CFD). Heating the sample area by a furnace type TEM holder gives rise to temperature gradients over the sample area. Three major mechanisms have been identified with respect to heat transfer in the sample area: radiation from the grid, conduction in the grid, and conduction in the gas. A parameter sensitivity analysis showed that the sample temperature was affected by the conductivity of the gas, the emissivity of the sample grid, and the conductivity of the grid. Ideally the grid should be polished and made from a material with good conductivity, e.g. copper. With hydrogen gas, which has the highest conductivity of the gases studied, the temperature difference over the TEM grid is less than 5 °C, at what must be considered typical conditions, and it is concluded that the conditions on the sample grid in the ETEM can be considered as isothermal during general use. - Highlights: • Computational fluid dynamics used for mapping flow and temperature in ETEM setup. • Temperature gradient across TEM grid in furnace based heating holder very small in ETEM. • Conduction from TEM grid and gas in addition to radiation from TEM grid most important. • Pressure drop in ETEM limited to the pressure limiting apertures

  19. Aespoe hard rock laboratory Sweden

    International Nuclear Information System (INIS)

    1992-01-01

    The aim of the new Aespoe hard rock laboratory is to demonstrate state of the art of technology and evaluation methods before the start of actual construction work on the planned deep repository for spent nuclear fuel. The nine country OECD/NEA project in the Stripa mine in Sweden has been an excellent example of high quality international research co-operation. In Sweden the new Aespoe hard rock laboratory will gradually take over and finalize this work. SKB very much appreciates the continued international participation in Aespoe which is of great value for the quality efficiency, and confidence in this kind of work. We have invited a number of leading experts to this first international seminar to summarize the current state of a number of key questions. The contributions show the great progress that has taken place during the years. The results show that there is a solid scientific basis for using this knowledge on site specific preparation and work on actual repositories. (au)

  20. Safety-factor profile tailoring by improved electron cyclotron system for sawtooth control and reverse shear scenarios in ITER

    International Nuclear Information System (INIS)

    Zucca, C.; Sauter, O.; Fable, E.; Henderson, M. A.; Polevoi, A.; Farina, D.; Ramponi, G.; Saibene, G.; Zohm, H.

    2008-01-01

    The effect of the predicted local electron cyclotron current driven by the optimized electron cyclotron system on ITER is discussed. A design variant was recently proposed to enlarge the physics program covered by the upper and equatorial launchers. By extending the functionality range of the upper launcher, significant control capabilities of the sawtooth period can be obtained. The upper launcher improvement still allows enough margin to exceed the requirements for neoclassical tearing mode stabilization, for which it was originally designed. The analysis of the sawtooth control is carried on with the ASTRA transport code, coupled with the threshold model by Por-celli, to study the control capabilities of the improved upper launcher on the sawtooth instability. The simulations take into account the significant stabilizing effect of the fusion alpha particles. The sawtooth period can be increased by a factor of 1.5 with co-ECCD outside the q = 1 surface, and decreased by at least 30% with co-ECCD inside q = 1. The present ITER base-line design has the electron cyclotron launchers providing only co-ECCD. The variant for the equatorial launcher proposes the possibility to drive counter-ECCD with 1 of the 3 rows of mirrors: the counter-ECCD can then be balanced with co-ECCD and provide pure ECH with no net driven current. The difference between full co-ECCD off-axis using all 20MW from the equatorial launcher and 20MW co-ECCD driven by 2/3 from the equatorial launcher and 1/3 from the upper launcher is shown to be negligible. Cnt-ECCD also offers greater control of the plasma current density, therefore this analysis addresses the performance of the equatorial launcher to control the central q profile. The equatorial launcher is shown to control very efficiently the value of q 0.2 -q min in advanced scenarios, if one row provides counter-ECCD.

  1. Optimising the cam profile of an electronic unit pump for a heavy-duty diesel engine

    International Nuclear Information System (INIS)

    Qiu, Tao; Dai, Hefei; Lei, Yan; Cao, Chunlei; Li, Xuchu

    2015-01-01

    For a fuel system with a tangent cam or a constant-velocity cam, the peak injection pressure continues to rise as the injection duration increases, but overly high peak pressures induce mechanical loads and wear, limiting the maximum engine speed and injection quantity. To improve the performance of an EUP (Electronic Unit Pump) fuel system for heavy-duty diesel engines, this work proposes a new pump cam, namely the constant-pressure cam. It helps the EUP run at a higher speed and deliver larger fuel quantities while maintaining a constant peak injection pressure, which improves the power of the heavy-duty diesel engine. A model based on the EUP was built to determine the three constraints for optimising the constant-pressure cam: 1) the pump pressure should equal the nozzle pressure; 2) the cam speed should decrease with the increase in the injection duration; and 3) the cam acceleration gradient should be zero. An EUP system was tested with the tangent cam and the optimised cam under different conditions. The experimental results show that the EUP system with the optimised cam delivers more injection quantity and runs at higher engine speeds while maintaining the same peak pressure as the tangent cam. - Highlights: • We propose a constant-pressure cam to improve the power of heavy-duty diesel engine. • We deduce three constraints for the CP (constant-peak pressure) cam based on a model. • The EUP system with the new cam works well under higher engine speed. • The peak pressure of the constant-pressure cam fuel system maintains high

  2. Polar observations of electron density distribution in the Earth’s magnetosphere. 2. Density profiles

    Directory of Open Access Journals (Sweden)

    H. Laakso

    2002-11-01

    Full Text Available Using spacecraft potential measurements of the Polar electric field experiment, we investigate electron density variations of key plasma regions within the magnetosphere, including the polar cap, cusp, trough, plasmapause, and auroral zone. The statistical results were presented in the first part of this study, and the present paper reports detailed structures revealed by individual satellite passes. The high-altitude (> 3 RE polar cap is generally one of the most tenuous regions in the magnetosphere, but surprisingly, the polar cap boundary does not appear as a steep density decline. At low altitudes (1 RE in summer, the polar densities are very high, several 100 cm-3 , and interestingly, the density peaks at the central polar cap. On the noonside of the polar cap, the cusp appears as a dense, 1–3° wide region. A typical cusp density above 4 RE distance is between several 10 cm-3 and a few 100 cm-3 . On some occasions the cusp is crossed multiple times in a single pass, simultaneously with the occurrence of IMF excursions, as the cusp can instantly shift its position under varying solar wind conditions, similar to the magnetopause. On the nightside, the auroral zone is not always detected as a simple density cavity. Cavities are observed but their locations, strengths, and sizes vary. Also, the electric field perturbations do not necessarily overlap with the cavities: there are cavities with no field disturbances, as well as electric field disturbances observed with no clear cavitation. In the inner magnetosphere, the density distributions clearly show that the plasmapause and trough densities are well correlated with geomagnetic activity. Data from individual orbits near noon and midnight demonstrate that at the beginning of geomagnetic disturbances, the retreat speed of the plasmapause can be one L-shell per hour, while during quiet intervals the plasmapause can expand anti-earthward at the same speed. For the trough region, it is found

  3. A central spent fuel storage in Sweden

    International Nuclear Information System (INIS)

    Gustafsson, B.; Hagberth, R.

    1978-01-01

    A planned central spent fuel storage facility in Sweden is described. The nuclear power program and quantities of spent fuel generated in Sweden is discussed. A general description of the facility is given with emphasis on the lay-out of the buildings, transport casks and fuel handling. Finally a possible design of a Swedish transportation system is discussed. (author)

  4. ASEA reduces nuclear waste in Sweden

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    ASEA, the worldwide manufacturer of electrical and mechanical equipment with headquarters in Vasteras, Sweden, is working on the development of a method using hot isostatic pressing for the safe containment and storage of nuclear waste. This development work is being carried out at the company's High-Pressure Laboratory at Robertsfors, in the north of Sweden

  5. File 'Energy-climate actions in Sweden'

    International Nuclear Information System (INIS)

    2009-01-01

    In a first part, this publication briefly presents some basic data and information on Sweden (geography, population, economy, administrative organisation, powers of local authorities, local finances), the Swedish 'energy profile' (consumption, intensity, imports and exports), greenhouse gas emissions (total and per sector), and the energy-climate strategy (impacts of climate change, national climatic strategy, national measures, action framework for local authorities). The second part addresses one of these action frameworks, the Klimatkommunernas network. It describes this network, its objectives, and possibilities for communities to join it. It describes its activities: information, publication of a strategic document of climate-energy actions for municipalities, examples of projects. The third part presents experiments performed by different local communities (Kristianstad, Vaexjoe, Malmoe, and Lund). For each of them are presented: the energy strategy (objectives, strategy, adaptation, energy-climate follow-up, application and actual measures), and some specific measures. These specific examples can be integrated systems based on biogas and biomass, a zero fossil fuel objective with the use of renewable energies for heat and cold production, for electricity production and to improve energy efficiency, to promote green fuels in transports, to reduce the impact of transports on climate, a sustainable town planning, environmental management. Some features are then highlighted in the adopted approach for these examples: a systemic, collaborative, participative and communicative approach

  6. Public Procurement of Innovation in Sweden

    DEFF Research Database (Denmark)

    Rolfstam, Max; Ågren, Robert

    2014-01-01

    Sweden is often thought of as a country with a strong tradition for using public procurement as a means to stimulate innovation. Early on, Sweden recognized and developed procedures for using public procurement as a technologydevelopment tool. After a period where emphasis was put on this aspect ...... government authorities to engage in public procurement for innovation, and by issuing guidance on the topic.......Sweden is often thought of as a country with a strong tradition for using public procurement as a means to stimulate innovation. Early on, Sweden recognized and developed procedures for using public procurement as a technologydevelopment tool. After a period where emphasis was put on this aspect...... of public procurement Sweden dropped many policy initiatives within this field. This was in part due to neo-liberal movements during the 1980s which in interaction with a distributed institutional setup led to the removal of incentives for a procuring authority to engage in public procurement of innovation...

  7. Clinical and angiographic profile of patients with markedly elevated coronary calcium scores (≥1000) detected by electron beam computed tomography

    International Nuclear Information System (INIS)

    Almeda, Francis Q.; Shah, Rima; Senter, Shaun; Kason, Thomas T.; Haynie, Justin; Calvin, James E.; Kavinsky, Clifford J.; Snell, R. Jeffrey; Schaer, Gary L.; McLaughlin, Vallerie V.

    2004-01-01

    Objective: The objective of this study was to determine the clinical and angiographic profile of patients with extremely high coronary artery calcium scores (CACS; ≥1000) by electron beam computed tomography (EBCT). Methods: All patients at Rush University Medical Center who had a calcium score ≥1000 and a coronary angiogram performed from 1997 to 2002 were identified using a prospectively collected database. The baseline demographics, symptom status, and degree of coronary stenosis by angiography and subsequent rate of coronary intervention were compared with that of patients with calcium scores <1000. Results: The clinical and angiographic profile of patients with severe coronary calcification, detected by EBCT, revealed that patients with scores ≥1000 had a significantly higher prevalence of coronary stenosis ≥50% compared with patients with scores <1000 (97% vs. 57%, P<.001). The group with CACS ≥1000 was more likely to be male (90% vs. 75%, P=.027) and was older (64±8 vs. 59±10, P=.001) compared with the group with less severe calcification. Although there was a significantly higher rate of luminal stenosis detected by coronary angiography in the cohort with CACS ≥1000, there was no difference in subsequent percutaneous coronary intervention (PCI) and utilization of intracoronary stents between the two groups. Conclusions: A markedly elevated coronary calcium score (≥1000) is correlated with increasing age and is associated with an increased likelihood of coronary stenosis ≥50%. However, the decision to perform coronary angiography in patients with severe coronary calcification should not be based solely on these findings, but should remain primarily dependent on the degree of ischemia detected by clinical and functional assessment

  8. ETMB-RBF: discrimination of metal-binding sites in electron transporters based on RBF networks with PSSM profiles and significant amino acid pairs.

    Science.gov (United States)

    Ou, Yu-Yen; Chen, Shu-An; Wu, Sheng-Cheng

    2013-01-01

    Cellular respiration is the process by which cells obtain energy from glucose and is a very important biological process in living cell. As cells do cellular respiration, they need a pathway to store and transport electrons, the electron transport chain. The function of the electron transport chain is to produce a trans-membrane proton electrochemical gradient as a result of oxidation-reduction reactions. In these oxidation-reduction reactions in electron transport chains, metal ions play very important role as electron donor and acceptor. For example, Fe ions are in complex I and complex II, and Cu ions are in complex IV. Therefore, to identify metal-binding sites in electron transporters is an important issue in helping biologists better understand the workings of the electron transport chain. We propose a method based on Position Specific Scoring Matrix (PSSM) profiles and significant amino acid pairs to identify metal-binding residues in electron transport proteins. We have selected a non-redundant set of 55 metal-binding electron transport proteins as our dataset. The proposed method can predict metal-binding sites in electron transport proteins with an average 10-fold cross-validation accuracy of 93.2% and 93.1% for metal-binding cysteine and histidine, respectively. Compared with the general metal-binding predictor from A. Passerini et al., the proposed method can improve over 9% of sensitivity, and 14% specificity on the independent dataset in identifying metal-binding cysteines. The proposed method can also improve almost 76% sensitivity with same specificity in metal-binding histidine, and MCC is also improved from 0.28 to 0.88. We have developed a novel approach based on PSSM profiles and significant amino acid pairs for identifying metal-binding sites from electron transport proteins. The proposed approach achieved a significant improvement with independent test set of metal-binding electron transport proteins.

  9. Research on Pentecostalism in Sweden

    Directory of Open Access Journals (Sweden)

    Jan-Åke Alvarsson

    2015-05-01

    Full Text Available This article aims to orientate and introduce potential researchers into Swedish Pentecostal movements, or those who wish to provide an overview of Scandinavian Christianity, by giving a brief summary of the history of Pentecostalism in Sweden and an overview of the main academic monographs that have been produced on this particular branch of Christianity. The idea is to highlight areas where we find relevant research and to point to areas into which there has been little or no investigation. Following, by way of introduction, a brief historical sketch, there is a note on spirituality before we are given a review of some thirty major academic works on the subject that a potential researcher would need to take into consideration.

  10. Chernobyl - its impact on Sweden

    International Nuclear Information System (INIS)

    1986-08-01

    In case of radiological emergency in Sweden, the Swedish National Institute of Radiation Protection (SSI) has the responsability of organizing a special task force with experts both from SSI and from other authorities. Reports of increased radiation levels reached SSI around 10 am on April 28, 1986, and the task force convened at 1030 am. A large number of measurements were made all over the country, and temporary grazing restrictions were imposed so as to aviod excessive doses from the food chain grass-cow-milk. Attention is now concentrated on regions with high cesium activity and on foodstuffs in general. A very tentative estimate of the collective dose commiment is 10 000 man.Sv. It turned out that the general public was not always satisfied with the information provided by the authorities, in spite of complete openness (Author)

  11. Radioactive wast management in Sweden

    International Nuclear Information System (INIS)

    Sivintsev, Yu.V.

    1985-01-01

    A system under development and partially realized of NPP radioactive waste management in Sweden up to spent-fuel disposal in underground storage is described. The system implies that the spent fuel after unloading from a reactor is stored at the NPP in water shielded tanks. Then fuel assemblies (FA) are transforted by a special ship, being operated since 1982, to the CLAB central storage. In CLAB water pools lacated in underground granite openings fuel assemblies will be stored for 40 years. CLAB is suggested to be put in operation in 1985. At the next stage FA are transported from CLAB to the canning set-up (located on the ground above the under ground disposal). Hot isostatic pressing is used for hermetization as a method allowing to make monolithic copper containers with a storage time of about 1 mln years. Sealed copper containers will be put into a burial ground sited in crystal rocks

  12. Radon in dwellings in Sweden

    International Nuclear Information System (INIS)

    Swedjemark, G.A.

    1980-01-01

    Studies on specific activities in building materials, gamma-radiation levels in dwellings, the concentrations of radon and daughters in the air indoors and the concentration of radon in tap water are in progress in Sweden. On the basis of these investigations and of the investigation of Hultqvist from the beginning of the 1950's, an attempt has been made to show how the radiation doses in dwellings have changed or may be changed by human activities and what these changes imply in terms of collective dose. The annual collective absorbed dose in the basal cells of the critical bronchial region have increased from 11 x 10 3 man-Gy for the occupants of dwellings existing in 1950 to 25 x 10 3 man-Gy for dwellings existing in 1975

  13. Incidence of hyperthyroidism in Sweden.

    Science.gov (United States)

    Abraham-Nordling, Mirna; Byström, Kristina; Törring, Ove; Lantz, Mikael; Berg, Gertrud; Calissendorff, Jan; Nyström, Helena Filipsson; Jansson, Svante; Jörneskog, Gun; Karlsson, F Anders; Nyström, Ernst; Ohrling, Hans; Orn, Thomas; Hallengren, Bengt; Wallin, Göran

    2011-12-01

    The incidence of hyperthyroidism has been reported in various countries to be 23-93/100,000 inhabitants per year. This extended study has evaluated the incidence for ~40% of the Swedish population of 9 million inhabitants. Sweden is considered to be iodine sufficient country. All patients including children, who were newly diagnosed with overt hyperthyroidism in the years 2003-2005, were prospectively registered in a multicenter study. The inclusion criteria are as follows: clinical symptoms and/or signs of hyperthyroidism with plasma TSH concentration below 0.2 mIE/l and increased plasma levels of free/total triiodothyronine and/or free/total thyroxine. Patients with relapse of hyperthyroidism or thyroiditis were not included. The diagnosis of Graves' disease (GD), toxic multinodular goiter (TMNG) and solitary toxic adenoma (STA), smoking, initial treatment, occurrence of thyroid-associated eye symptoms/signs, and demographic data were registered. A total of 2916 patients were diagnosed with de novo hyperthyroidism showing the total incidence of 27.6/100,000 inhabitants per year. The incidence of GD was 21.0/100,000 and toxic nodular goiter (TNG=STA+TMNG) occurred in 692 patients, corresponding to an annual incidence of 6.5/100,000. The incidence was higher in women compared with men (4.2:1). Seventy-five percent of the patients were diagnosed with GD, in whom thyroid-associated eye symptoms/signs occurred during diagnosis in every fifth patient. Geographical differences were observed. The incidence of hyperthyroidism in Sweden is in a lower range compared with international reports. Seventy-five percent of patients with hyperthyroidism had GD and 20% of them had thyroid-associated eye symptoms/signs during diagnosis. The observed geographical differences require further studies.

  14. Changes in the aromatic profile of espresso coffee as a function of the grinding grade and extraction time: a study by the electronic nose system.

    Science.gov (United States)

    Severini, C; Ricci, I; Marone, M; Derossi, A; De Pilli, T

    2015-03-04

    The changes in chemical attributes and aromatic profile of espresso coffee (EC) were studied taking into account the extraction time and grinding level as independent variables. Particularly, using an electronic nose system, the changes of the global aromatic profile of EC were highlighted. The results shown as the major amounts of organic acids, solids, and caffeine were extracted in the first 8 s of percolation. The grinding grade significantly affected the quality of EC probably as an effect of the particle size distribution and the percolation pathways of water through the coffee cake. The use of an electronic nose system allowed us to discriminate the fractions of the brew as a function of the percolation time and also the regular coffee obtained from different grinding grades. Particularly, the aromatic profile of a regular coffee (25 mL) was significantly affected by the grinding level of the coffee grounds and percolation time, which are two variables under the control of the bar operator.

  15. Monte Carlo investigation of the effect of small cutouts on beam profile parameters of 12 and 14 MeV electron beams

    International Nuclear Information System (INIS)

    Khaledi, Navid; Arbabi, Azim; Sardari, Dariush; Rabie Mahdavi, Seied; Aslian, Hossein; Dabaghi, Moloud; Sheibani, Kourosh

    2013-01-01

    Cutouts, which are used as field-shaping shield, affect several electron beam parameters. These effects are more observable for small field sizes and high energy electron beams. Owing to the fact that small fields prevent the lateral scatter equilibrium, at higher energies larger field radius is required for the establishment of lateral equilibrium. The profile curves are derived from circular, triangular, and square cutout shapes and size placed in a 10 × 10 cm 2 electron applicator. These profile curves are obtained using parallel plane type ion chamber at the R 100 , R 90 , R 80 and R 50 depths. Correspondingly, the source surface distance is 100 cm. In this study MCNP Monte Carlo (MC) simulation was used to compare Percentage Depth Dose (PDD) and Profile of electron beams. Monte Carlo and measured results showed a good compliance for PDD and beam profile. The measurements and calculations showed that as the field width decreases, the Flatness and Penumbra Ratio also decreases. In other words, flatter plateau was available for larger fields. Also the Coverage Ratio for each of the profiles is presented. The flatness and symmetry values for triangle shapes were greater than the two other shapes. Knowledge of these changes are significant in radiation therapy. Accordingly, a comparison between the Monte Carlo data and the measured results can be beneficial for treatment simulation and development of treatment planning systems. - Highlights: ► Mesh Tally 1 and pedep keyword were used to calculate the PDD and profile values. ► In measurement the coverage for larger fields and fewer doses are better. ► By increasing the depth, the flatness and symmetry values were increased. ► The worst flatness and symmetry (between 3 compared shapes) belonged to triangle. ► The given Penumbra and Coverage Ratio can be helpful for PTV margin and coverage

  16. Annual Report 1999. Electric power in Sweden

    International Nuclear Information System (INIS)

    2000-07-01

    Power Association is of the opinion that the increase in production taxes on nuclear power is completely misdirected. Sweden is the only EU country to have production taxes on electricity. Uncertainty and the lack of stability in the present taxation system will entail considerable difficulties both for electricity-intensive industry and for the power companies vis-a-vis long-term investment in Sweden. In 1999, overall consumption in the country fell by 0.3 TWh to 142.9 TWh, compared with last year. The decrease is explained by the fact that the autumn was very warm. Inflow into the major rivers was somewhat higher than normal enabling 70.4 TWh to be generated by the hydropower plants. This is 6 TWh more than during a normal year. Nuclear power accounted for 70.2 TWh, equal to the previous year. Additionally, combined heat and power and condensing plants accounted for 9.5 TWh, almost half of which using biofuels. Wind power continues to increase. At year-end, there were about 480 wind power plants, and the annual production was 0.4 TWh. Overall electricity production in the country was 150.5 TWh, a decrease of 3.4 TWh, or just under three percent. Exports amounted to 16.1 TWh and imports to 8.5 TWh. The average price for the year on the Nordic power exchange's spot market (Sector Sweden) was SEK 0.119 per kWh. The low price is explained by the mild weather and a plentiful supply of water in the Nordic reservoirs. On 1 November, the electricity market was changed in such a way that small consumers, with a fuse rating of up to 200 amps, were also able to take part. Parliament's decision to remove the requirement for continually registering hourly meters was of crucial importance. With this measure, the electricity market was also opened up to household customers. Hourly metering was replaced by profile settlement. Customers were offered fixed prices that could be considerably lower than previously. Flexible prices were on offer, e.g. linked to the power exchange's spot

  17. Characterization of oxide layers on amorphous Mg-based alloys by Auger electron spectroscopy with sputter depth profiling

    Energy Technology Data Exchange (ETDEWEB)

    Baunack, S.; Wolff, U. [Leibniz-Institut fuer Festkoerper- und Werkstoffforschung Dresden, Postfach 270016, 01171, Dresden (Germany); Subba Rao, R.V. [Indira Ghandi Centre for Atomic Research, 603 102, Kalpakkam, Tamil Nadu (India)

    2003-04-01

    Amorphous ribbons of Mg-Y-TM-[Ag](TM: Cu, Ni), prepared by melt spinning, were subjected to electrochemical investigations. Oxide layers formed anodically under potentiostatic control in different electrolytes were investigated by AES and sputter depth profiling. Problems and specific features of characterization of the composition of oxide layers and amorphous ternary or quaternary Mg-based alloys have been investigated. In the alloys the Mg(KL{sub 23}L{sub 23}) peak exhibits a different shape compared to that in the pure element. Analysis of the peak of elastically scattered electrons proved the absence of plasmon loss features, characteristic of pure Mg, in the alloy. A different loss feature emerges in Mg(KL{sub 23}L{sub 23}) and Cu(L{sub 23}VV). The system Mg-Y-TM-[Ag] suffers preferential sputtering. Depletion of Mg and enrichment of TM and Y are found. This is attributed mainly to the preferential sputtering of Mg. Thickness and composition of the formed oxide layer depend on the electrochemical treatment. After removing the oxide by sputtering the concentration of the underlying alloy was found to be affected by the treatment. (orig.)

  18. Time Variations of Observed H α Line Profiles and Precipitation Depths of Nonthermal Electrons in a Solar Flare

    Energy Technology Data Exchange (ETDEWEB)

    Falewicz, Robert; Radziszewski, Krzysztof; Rudawy, Paweł; Berlicki, Arkadiusz, E-mail: falewicz@astro.uni.wroc.pl, E-mail: radziszewski@astro.uni.wroc.pl, E-mail: rudawy@astro.uni.wroc.pl, E-mail: berlicki@astro.uni.wroc.pl [Astronomical Institute, University of Wrocław, 51-622 Wrocław, ul. Kopernika 11 (Poland)

    2017-10-01

    We compare time variations of the H α and X-ray emissions observed during the pre-impulsive and impulsive phases of the C1.1-class solar flare on 2013 June 21 with those of plasma parameters and synthesized X-ray emission from a 1D hydrodynamic numerical model of the flare. The numerical model was calculated assuming that the external energy is delivered to the flaring loop by nonthermal electrons (NTEs). The H α spectra and images were obtained using the Multi-channel Subtractive Double Pass spectrograph with a time resolution of 50 ms. The X-ray fluxes and spectra were recorded by RHESSI . Pre-flare geometric and thermodynamic parameters of the model and the delivered energy were estimated using RHESSI data. The time variations of the X-ray light curves in various energy bands and those of the H α intensities and line profiles were well correlated. The timescales of the observed variations agree with the calculated variations of the plasma parameters in the flaring loop footpoints, reflecting the time variations of the vertical extent of the energy deposition layer. Our result shows that the fast time variations of the H α emission of the flaring kernels can be explained by momentary changes of the deposited energy flux and the variations of the penetration depths of the NTEs.

  19. Lithium diffusion in polyether ether ketone and polyimide stimulated by in situ electron irradiation and studied by the neutron depth profiling method

    Science.gov (United States)

    Vacik, J.; Hnatowicz, V.; Attar, F. M. D.; Mathakari, N. L.; Dahiwale, S. S.; Dhole, S. D.; Bhoraskar, V. N.

    2014-10-01

    Diffusion of lithium from a LiCl aqueous solution into polyether ether ketone (PEEK) and polyimide (PI) assisted by in situ irradiation with 6.5 MeV electrons was studied by the neutron depth profiling method. The number of the Li atoms was found to be roughly proportional to the diffusion time. Regardless of the diffusion time, the measured depth profiles in PEEK exhibit a nearly exponential form, indicating achievement of a steady-state phase of a diffusion-reaction process specified in the text. The form of the profiles in PI is more complex and it depends strongly on the diffusion time. For the longer diffusion time, the profile consists of near-surface bell-shaped part due to Fickian-like diffusion and deeper exponential part.

  20. Energy in Sweden. Facts and figures 2005

    International Nuclear Information System (INIS)

    2005-12-01

    Energy in Sweden. Facts and Figures 2005 contains the tabular data for most of the diagrams in the main publication. These data consist primarily of the results of the Agency's processing of basic data from Statistics Sweden. Facts and Figures is available at www.stem.se in pdf- and excel file formats. With effect from the 2001 edition, statistics are of preliminary character for the two preceding years (2003 and 2004). Breakdowns into certain types of fuels vary somewhat depending on whether preliminary or final data has been used. Further information about the statistics can be found in Energy in Sweden, chapter 8 Energy Facts

  1. Occupational Gender Composition and Wages in Sweden

    OpenAIRE

    Hansen, Jörgen; Wahlberg, Roger

    2000-01-01

    We estimate the relationship between wages and occupational gender segregation in Sweden. Because of high wage equality in Sweden compared to the U.S., we expect a lower wage penalty of job femaleness in Sweden than in the U.S. Our results supports this hypothesis. We also investigate how the unexplained gender wage gap vary across occupations and find that this gap is smallest in male dominated jobs and largest in female dominated jobs. Finally, we investigate whether the female wage-experie...

  2. New Vary-Chap Profile of the Topside Ionosphere Electron Density Distribution for use with the IRI Model and the GIRO Real-Time Data

    Science.gov (United States)

    Nsumei, Patrick; Reinisch, Bodo W.; Huang, Xueqin; Bilitza, Dieter

    2012-01-01

    A new Vary-Chap function is introduced for the empirical modeling of the electron density N(h) profile in the topside ionosphere that uses a shape function S(h) in the generalized Chapman function. The Vary-Chap profile extends the bottomside profile that is specified by the IRI model or measured by the Global Ionospheric Radio Observatory (GIRO) to the altitude of the ISIS-2 satellite. Some 80,000 topside profiles, measured by the topside sounder on the ISIS-2 satellite were analyzed, and the shape function S(h) was calculated for each profile. A parameterized function S*(h), composed of two sub-functions S1(h) and S2(h), is fitted to the measured S(h) profile using three free parameters. At altitudes just above the F2 layer peak height hmF2, the shape function S1 controls S(h), and at greater altitudes S2 controls S(h). The height of the intersection of S1 and S2 is defined as the transition height h(sub T) indicating the transition from an O(+) to an H(+)-dominated profile shape. The observed transition heights range from approx.500 km to 800 km.

  3. Depth-Profiling Electronic and Structural Properties of Cu(In,Ga)(S,Se)2 Thin-Film Solar Cell.

    Science.gov (United States)

    Chiang, Ching-Yu; Hsiao, Sheng-Wei; Wu, Pin-Jiun; Yang, Chu-Shou; Chen, Chia-Hao; Chou, Wu-Ching

    2016-09-14

    Utilizing a scanning photoelectron microscope (SPEM) and grazing-incidence X-ray powder diffraction (GIXRD), we studied the electronic band structure and the crystalline properties of the pentanary Cu(In,Ga)(S,Se)2 (CIGSSe) thin-film solar cell as a function of sample depth on measuring the thickness-gradient sample. A novel approach is proposed for studying the depth-dependent information on thin films, which can provide a gradient thickness and a wide cross-section of the sample by polishing process. The results exhibit that the CIGSSe absorber layer possesses four distinct stoichiometries. The growth mechanism of this distinctive compositional distribution formed by a two-stage process is described according to the thermodynamic reaction and the manufacturing process. On the basis of the depth-profiling results, the gradient profiles of the conduction and valence bands were constructed to elucidate the performance of the electrical properties (in this case, Voc = 620 mV, Jsc = 34.6 mA/cm(2), and η = 14.04%); the valence-band maxima (VBM) measured with a SPEM in the spectroscopic mode coincide with this band-structure model, except for a lowering of the VBM observed in the surface region of the absorber layer due to the ordered defect compound (ODC). In addition, the depth-dependent texturing X-ray diffraction pattern presents the crystalline quality and the residual stress for each depth of a thin-film device. We find that the randomly oriented grains in the bottom region of the absorber layer and the different residual stress between the underlying Mo and the absorber interface, which can deteriorate the electrical performance due to peeling-off effect. An anion interstitial defect can be observed on comparing the anion concentration of the elemental distribution with crystalline composition; a few excess sulfur atoms insert in interstitial sites at the front side of the absorber layer, whereas the interstitial selenium atoms insert at the back side.

  4. Development of nuclear power in Sweden

    International Nuclear Information System (INIS)

    Sokolowski, E.

    1994-01-01

    The history and development of nuclear energetics in Sweden has been described. Up to now 12 units (9 BWR and 3 PWR nuclear reactors) with total 70 TWh electric power is being working in Sweden. If the same power will be installed as a coal-fired units the emissions of 65 million tons of CO 2 , 240,000 tons of SO 2 and 140 tons of NO x would be expected. 1 tab

  5. Interdiffusion in epitaxial, single-crystalline Au/Ag thin films studied by Auger electron spectroscopy sputter-depth profiling and positron annihilation

    International Nuclear Information System (INIS)

    Noah, Martin A.; Flötotto, David; Wang, Zumin; Reiner, Markus; Hugenschmidt, Christoph; Mittemeijer, Eric J.

    2016-01-01

    Interdiffusion in epitaxial, single-crystalline Au/Ag bilayered thin films on Si (001) substrates was investigated by Auger electron spectroscopy (AES) sputter-depth profiling and by in-situ positron annihilation Doppler broadening spectroscopy (DBS). By the combination of these techniques identification of the role of vacancy sources and sinks on interdiffusion in the Au/Ag films was possible. It was found that with precise knowledge of the concentration-dependent self-diffusion and impurity diffusion coefficients a distinction between the Darken-Manning treatment and Nernst-Planck treatment can be made, which is not possible on the basis of the determined concentration-depth profiles alone.

  6. Radon in dwellings in Sweden

    International Nuclear Information System (INIS)

    Swedjemark, G.A.

    1978-04-01

    Studies on the specific activities in building materials, the γ-radiation levels in dwellings, the concentrations of radon and daughters in the air indoors and the concentration of radon in tap water are in progress in Sweden. On basis of these investigations and of the investigation of Hultqvist from the beginning of the 1950s, an attempt has been made to show how the radiation doses in dwellings have changed or may be changed by human activities and what these changes imply in terms of collective dose. The annual collective absorbed dose in the basal cells of the critical bronchial region have increased from 11 . 10 3 manGy for the occupants of dwellings existing in 1950 to 25 . 10 3 manGy for dwellings existing in 1975. If the building of houses continues as at present it can be estimated that the annual collective dose will be between 25 and 31 . 10 3 manGy for the dwellings of 1985. (author)

  7. Ageing management requirements in Sweden

    International Nuclear Information System (INIS)

    Gott, K.

    2007-01-01

    Since the adoption of the 1997 act of parliament concerning the abolishment of nuclear power in Sweden plant lives are no longer limited until 2010 as they were following the referendum in 1980. The Swedish Nuclear Power Inspectorate (SKI) has therefore in its most recent general regulations from 2004 introduced requirements for plants to develop ageing management programmes which should have been in place by the end of 2005. An ageing management programme for a nuclear power plant can be viewed as a high level coordinated programme consisting of several other programmes including maintenance and inspection programmes, and as such it should be an integrated part of the quality assurance system of the plant. The goals of the programme are to ensure that there is long term management of ageing and avoidance of the unexpected. For the Swedish regulator the safety aspects and not the economic aspects of ageing management are of primary importance. But there are clear advantages to utilities if large surprises which result in unplanned outages can be avoided. (author)

  8. Determination of the thickness distribution of a graphene layer grown on a 2″ SiC wafer by means of Auger electron spectroscopy depth profiling

    International Nuclear Information System (INIS)

    Kotis, L.; Gurban, S.; Pecz, B.; Menyhard, M.; Yakimova, R.

    2014-01-01

    Highlights: • The thickness of graphene grown on SiC was determined by AES depth profiling. • The AES depth profiling verified the presence of buffer layer on SiC. • The presence of unsaturated Si bonds in the buffer layer has been shown. • Using multipoint analysis thickness distribution of the graphene on the wafer was determined. - Abstract: Auger electron spectroscopy (AES) depth profiling was applied for determination of the thickness of a macroscopic size graphene sheet grown on 2 in. 6H-SiC (0 0 0 1) by sublimation epitaxy. The measured depth profile deviated from the expected exponential form showing the presence of an additional, buffer layer. The measured depth profile was compared to the simulated one which allowed the derivation of the thicknesses of the graphene and buffer layers and the Si concentration of buffer layer. It has been shown that the graphene-like buffer layer contains about 30% unsaturated Si. The depth profiling was carried out in several points (diameter 50 μm), which permitted the constructing of a thickness distribution characterizing the uniformity of the graphene sheet

  9. Comparison of electron density profiles observed in China's low latitude station with that produced by the International Reference Ionosphere (IRI2001)

    International Nuclear Information System (INIS)

    Zhang Manlian; Shi Jiankui; Wang Xiao

    2003-01-01

    One month's data of ionograms observed by DPS-4 digisonde in China's low latitude station Hainan (19.4 deg N/109.0 deg E) for the high solar activity year 2002 is used to make a comparison study between the observational electron density profiles and that produced by the newly updated International Reference Ionosphere (IRI2001). The present study showed that for the month studied (April, 2002): (1) When B0-Tab value is used, profiles given by IRI2001 are in poor agreement with the observational results during daytime and nearby midnight hours when standard Ne(h) option is chosen, whereas when the LAY functions version is chosen, IRI2001 produces profiles with erroneous features during evening and nighttime hours, although it produces profiles in a reasonable good agreement with the observational ones during daytime hours. (2) In general, profiles produced by IRI2001 with B0-Gulyaeva choice is in better agreement with observational profiles than when B0-Tab is chosen. When the B0-Gulyaeva and LAY functions version of Ne(h) are both chosen, IRI2001 produced the best results when compared with the observational results. (3) The B0 parameter given by B0-Gulyaeva choice in IRI2001 is much closer to the observed (best fitted) one than that given by the B0-Tab choice is. (author)

  10. Odor Profile of Different Varieties of Extra-Virgin Olive Oil During Deep Frying Using an Electronic Nose and SPME-GC-FID

    Science.gov (United States)

    Messina, Valeria; Biolatto, Andrea; Sancho, Ana; Descalzo, Adriana; Grigioni, Gabriela; de Reca, Noemí Walsöe

    2011-09-01

    The aim of the performed work was to evaluate with an electronic nose changes in odor profile of Arauco and Arbequina varieties of extra-virgin olive oil during deep-frying. Changes in odor were analyzed using an electronic nose composed of 16 sensors. Volatile compounds were analyzed by SPME-GC-FID. Principal Component Analysis was applied for electronic results. Arauco variety showed the highest response for sensors. Statistical analysis for volatile compounds indicated a significant (P<0.001) interaction between variety and time of frying processes. Arauco variety showed the highest production of volatile compounds at 60 min of deep frying. The two varieties presented distinct patterns of volatile products, being clearly identified with the electronic nose.

  11. Use of a generic protocol in documentation of prescription errors in Estonia, Norway and Sweden

    Directory of Open Access Journals (Sweden)

    Haavik S

    2012-06-01

    Full Text Available Pharmacists have an important role in detecting, preventing, and solving prescription problems, which if left unresolved, may pose a risk of harming the patient.Objective: The objectives of this study were to evaluate the feasibility of a generic study instrument for documentation of prescription problems requiring contact with prescriber before dispensing. The study was organized: 1 by countries: Estonia, Norway and Sweden; 2 by type of prescriptions: handwritten prescriptions, printouts of prescriptions in the electronic medical record and electronically transmitted prescriptions to pharmacies; and 3 by recording method - self-completion by pharmacists and independent observers.Methods: Observational study with independent observers at community pharmacies in Estonia (n=4 and Sweden (n=7 and self-completed protocols in Norway (n=9.Results: Pharmacists’ in Estonia contacted the prescriber for 1.47% of the prescriptions, about 3 times as often as in Norway (0.45% and Sweden (0.38%. Handwritten prescriptions dominated among the problem prescriptions in Estonia (73.2%, printouts of prescriptions in the electronic medical record (89.1% in Norway and electronically transmitted prescriptions to pharmacies (55.9% in Sweden.More administrative errors were identified on handwritten prescriptions and printouts of prescriptions in the electronic medical record in Estonia and in Norway compared with electronically transmitted prescriptions to pharmacies in Sweden (p<0.05 for prescription types and p<0.01 for countries. However, clinically important errors and delivery problems appeared equally often on the different types of prescriptions. In all three countries, only few cases of drug interactions and adverse drug reactions were identified.Conclusion: Despite the different patterns of prescription problems in three countries, the instrument was feasible and can be regarded appropriate to document and classify prescription problems necessitating contact

  12. Observation of dopant-profile independent electron transport in sub-monolayer TiO{sub x} stacked ZnO thin films grown by atomic layer deposition

    Energy Technology Data Exchange (ETDEWEB)

    Saha, D., E-mail: sahaphys@gmail.com, E-mail: pmisra@rrcat.gov.in; Misra, P., E-mail: sahaphys@gmail.com, E-mail: pmisra@rrcat.gov.in; Joshi, M. P.; Kukreja, L. M. [Laser Materials Processing Division, Raja Ramanna Centre for Advanced Technology, Indore 452 013 (India); Das, Gangadhar [Indus Synchrotrons Utilisation Division, Raja Ramanna Centre for Advanced Technology, Indore 452 013 (India)

    2016-01-18

    Dopant-profile independent electron transport has been observed through a combined study of temperature dependent electrical resistivity and magnetoresistance measurements on a series of Ti incorporated ZnO thin films with varying degree of static-disorder. These films were grown by atomic layer deposition through in-situ vertical stacking of multiple sub-monolayers of TiO{sub x} in ZnO. Upon decreasing ZnO spacer layer thickness, electron transport smoothly evolved from a good metallic to an incipient non-metallic regime due to the intricate interplay of screening of spatial potential fluctuations and strength of static-disorder in the films. Temperature dependent phase-coherence length as extracted from the magnetotransport measurement revealed insignificant role of inter sub-monolayer scattering as an additional channel for electron dephasing, indicating that films were homogeneously disordered three-dimensional electronic systems irrespective of their dopant-profiles. Results of this study are worthy enough for both fundamental physics perspective and efficient applications of multi-stacked ZnO/TiO{sub x} structures in the emerging field of transparent oxide electronics.

  13. Analysis of a Novel Diffractive Scanning-Wire Beam Position Monitor (BPM) for Discriminative Profiling of Electron Vs. X Ray Beams

    International Nuclear Information System (INIS)

    Tatchyn, R.

    2011-01-01

    Recent numerical studies of Free Electron Lasers (FELs) operating in the Self Amplified Spontaneous Emission (SASE) regime indicate a large sensitivity of the gain to the degree of transverse overlap (and associated phase coherence) between the electron and photon beams traveling down the insertion device. Simulations of actual systems imply that accurate detection and correction for this relative loss of overlap, rather than correction for the absolute departure of the electron beam from a fixed axis, is the preferred function of an FEL amplifier's Beam Position Monitor (BPM) and corrector systems. In this note we propose a novel diffractive BPM with the capability of simultaneously detecting and resolving the absolute (and relative) transverse positions and profiles of electron and x-ray beams co-propagating through an undulator. We derive the equations governing the performance of the BPM and examine its predicted performance for the SLAC Linac Coherent Light Source (LCLS), viz., for profiling multi-GeV electron bunches co-propagating with one-to-several-hundred keV x-ray beams. Selected research and development (r and d) tasks for fabricating and testing the proposed BPM are discussed.

  14. Electricity supply in Sweden 1983

    International Nuclear Information System (INIS)

    1984-01-01

    The year 1983 was characterized by a continued decrease in oil consumption and an increase in electricity consumption. Totally the supply of fuels decreased from 278TWh to 264 TWh in 1983. The electricity supply increased from 99.9 TWh in 1982 to 110.8 TWh in 1983. The consumers total energy use decreased from 358 TWh in 1982 to 355 TWh in 1983. Electricity consumption excluding transmission losses increased from 91,4 TWh in 1982 to 101.1TWh in 1983. The increase was due to electric space heating disconnectable electric boilers and to industry. At the end of 1983 the electric heating subscriptions are estimated to corresponds to 45 percent of all one-family houses. Hydropower accounted for 54 percent and nucler power accounted for 34 percent of the total supply of electricity in 1983. The highest hourly load during 1983 amounted to 20862 MW. The lowest load during 1983 amounted to 5185 MW. Ten nuclear power units were in commercial operation during the year. The energy availability figures were as follows: Barsebaeck 1 85 percent, Barsebaeck 2 82 percent, Forsmark 1 84 percent, Forsmark 2 88 percent, Oskarshamn 1 87 percent, Oskarshamn 2 83 percent, Ringhals 1 59 percent and Ringhals 2 68 percent. The production of electricity from conventional thermal power stations was only 4.0 TWh. Back pressure power in industry contributed 2.5 TWh of this figure and combined power and district heating stations 1.3 TWh. Two coal fired combined power and district heating plants were added and sevearl combined power and district heating plants have been rebuilt to be coal fired. The high voltage power grid system permits joint operation by all the power companies in the country, and the major power companies utilize the network for exchanging surplus power with other power companies. An account of the public debate on energy in Sweden during 1983 is also given.(L.E.)

  15. CO2 storage in Sweden

    International Nuclear Information System (INIS)

    Ekstroem, Clas; Andersson, Annika; Kling, Aasa; Bernstone, Christian; Carlsson, Anders; Liljemark, Stefan; Wall, Caroline; Erstedt, Thomas; Lindroth, Maria; Tengborg, Per; Edstroem, Mikael

    2004-07-01

    This study considers options, that could be feasible for Sweden, to transport and geologically store CO 2 , providing that technology for electricity production with CO 2 capture will be available in the future and also acceptable from cost- and reliability point of view. As a starting point, it is assumed that a new 600-1000 MW power plant, fired with coal or natural gas, will be constructed with CO 2 capture and localised to the Stockholm, Malmoe or Goeteborg areas. Of vital importance for storage of carbon dioxide in a reservoir is the possibility to monitor its distribution, i.e. its migration within the reservoir. It has been shown in the SACS-project that the distribution of carbon dioxide within the reservoir can be monitored successfully, mainly by seismic methods. Suitable geologic conditions and a large storage potential seems to exist mainly in South West Scania, where additional knowledge on geology/hydrogeology has been obtained since the year 2000 in connection to geothermal energy projects, and in the Eastern part of Denmark, bordering on South West Scania. Storage of carbon dioxide from the Stockholm area should not be excluded, but more studies are needed to clarify the storage options within this area. The possibilities to use CO 2 for enhanced oil recovery, EOR, in i.a. the North Sea should be investigated, in order to receive incomes from the CO 2 and shared costs for infrastructure, and by this also make the CO 2 regarded as a trading commodity, and thereby achieving a more favourable position concerning acceptance, legal issues and regulations. The dimensions of CO 2 -pipelines should be similar to those for natural natural gas, although regarding some aspects they have different design and construction prerequisites. To obtain cost efficiency, the transport distances should be kept short, and possibilities for co-ordinated networks with short distribution pipelines connected to common main pipelines, should be searched for. Also, synergies

  16. Electronics

    Science.gov (United States)

    2001-01-01

    International Acer Incorporated, Hsin Chu, Taiwan Aerospace Industrial Development Corporation, Taichung, Taiwan American Institute of Taiwan, Taipei, Taiwan...Singapore and Malaysia .5 - 4 - The largest market for semiconductor products is the high technology consumer electronics industry that consumes up...Singapore, and Malaysia . A new semiconductor facility costs around $3 billion to build and takes about two years to become operational

  17. Annual Report 1999. Electric power in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-15

    . The Swedish Power Association is of the opinion that the increase in production taxes on nuclear power is completely misdirected. Sweden is the only EU country to have production taxes on electricity. Uncertainty and the lack of stability in the present taxation system will entail considerable difficulties both for electricity-intensive industry and for the power companies vis-a-vis long-term investment in Sweden. In 1999, overall consumption in the country fell by 0.3 TWh to 142.9 TWh, compared with last year. The decrease is explained by the fact that the autumn was very warm. Inflow into the major rivers was somewhat higher than normal enabling 70.4 TWh to be generated by the hydropower plants. This is 6 TWh more than during a normal year. Nuclear power accounted for 70.2 TWh, equal to the previous year. Additionally, combined heat and power and condensing plants accounted for 9.5 TWh, almost half of which using biofuels. Wind power continues to increase. At year-end, there were about 480 wind power plants, and the annual production was 0.4 TWh. Overall electricity production in the country was 150.5 TWh, a decrease of 3.4 TWh, or just under three percent. Exports amounted to 16.1 TWh and imports to 8.5 TWh. The average price for the year on the Nordic power exchange's spot market (Sector Sweden) was SEK 0.119 per kWh. The low price is explained by the mild weather and a plentiful supply of water in the Nordic reservoirs. On 1 November, the electricity market was changed in such a way that small consumers, with a fuse rating of up to 200 amps, were also able to take part. Parliament's decision to remove the requirement for continually registering hourly meters was of crucial importance. With this measure, the electricity market was also opened up to household customers. Hourly metering was replaced by profile settlement. Customers were offered fixed prices that could be considerably lower than previously. Flexible prices were on offer, e.g. linked to the

  18. Average profiles of the solar wind and outer radiation belt during the extreme flux enhancement of relativistic electrons at geosynchronous orbit

    Directory of Open Access Journals (Sweden)

    R. Kataoka

    2008-06-01

    Full Text Available We report average profiles of the solar wind and outer radiation belt during the extreme flux enhancement of relativistic electrons at geosynchronous orbit (GEO. It is found that seven of top ten extreme events at GEO during solar cycle 23 are associated with the magnetosphere inflation during the storm recovery phase as caused by the large-scale solar wind structure of very low dynamic pressure (<1.0 nPa during rapid speed decrease from very high (>650 km/s to typical (400–500 km/s in a few days. For the seven events, the solar wind parameters, geomagnetic activity indices, and relativistic electron flux and geomagnetic field at GEO are superposed at the local noon period of GOES satellites to investigate the physical cause. The average profiles support the "double inflation" mechanism that the rarefaction of the solar wind and subsequent magnetosphere inflation are one of the best conditions to produce the extreme flux enhancement at GEO because of the excellent magnetic confinement of relativistic electrons by reducing the drift loss of trapped electrons at dayside magnetopause.

  19. Energy in Sweden. Facts and figures 2004

    International Nuclear Information System (INIS)

    2004-12-01

    Energy in Sweden 2004: Facts and Figures contains the tabular data for most of the diagrams in the main publication. These data consist primarily of the results of the Agency's processing of basic data from Statistics Sweden. Facts and Figures is available at www.stem.se in pdf- and excel file formats. Since the year 2001 statistics for the period 1983-1998 are revised compared to data for previous editions. With effect from the 2001 edition, statistics are of preliminary character for the two preceding years. Breakdowns into certain types of fuels vary somewhat depending on whether preliminary or final data has been used. Further information about the statistics can be found in Energy in Sweden, chapter 8 Energy Facts.

  20. Health and social inequities in Sweden

    DEFF Research Database (Denmark)

    Diderichsen, Finn

    1990-01-01

    Sweden is one of Europe's most egalitarian countries. The social inequities in living conditions have been gradually reduced to a level that is more equal than in most countries in Europe. Even if general health development has been positive during recent years, data reviewed here indicate...... that there may be adverse effects for some groups which may increase inequities. This article presents results on inequities in health from the Public Health Report of Sweden 1987 and discusses causal mechanisms and implications for health policy....

  1. Introducing Micro-finance in Sweden

    DEFF Research Database (Denmark)

    Barinaga, Ester

    2013-01-01

    The case describes the first year of efforts to introduce microfinance as a tool to work with vulnerable groups in Sweden, more particularly ex-convicts, former drug-addicts and longterm unemployed women of immigrant background. The teaching objective is to discuss whether micro-finance can be seen...

  2. Status and use of PSA in Sweden

    International Nuclear Information System (INIS)

    Knochenhauer, M.

    1996-05-01

    The performance and use of PSA:s in Sweden goes back about two decades. During all of this time, the field of PSA has been developing intensively, both internationally and within Sweden. The latest years have been characterised by an increased use of PSA models and results, and by major extensions of existing PSA models. The aim of this document is to describe PSA in Sweden with respect to development, scope and maturity, as well as to the contents of the analyses and the use of results. PSA activities will be described from the point of view of both the authorities and the utilities. The report gives an overview of the development within the area of PSA in Sweden both its history and current trends. The aim has been to include a reasonable amount of detail, both on the methods and results in PSA:s performed and on the numerous supporting research programs dealing with various aspects of PSA. 39 refs 39 refs

  3. Status and use of PSA in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Knochenhauer, M

    1996-05-01

    The performance and use of PSA:s in Sweden goes back about two decades. During all of this time, the field of PSA has been developing intensively, both internationally and within Sweden. The latest years have been characterised by an increased use of PSA models and results, and by major extensions of existing PSA models. The aim of this document is to describe PSA in Sweden with respect to development, scope and maturity, as well as to the contents of the analyses and the use of results. PSA activities will be described from the point of view of both the authorities and the utilities. The report gives an overview of the development within the area of PSA in Sweden both its history and current trends. The aim has been to include a reasonable amount of detail, both on the methods and results in PSA:s performed and on the numerous supporting research programs dealing with various aspects of PSA. 39 refs 39 refs.

  4. Energy in Sweden. Facts and figures 1999

    International Nuclear Information System (INIS)

    1999-11-01

    This supplement contains the tabular data of most of the diagrams in the main publication (Energy in Sweden 1999, STEM-ET-82-1999). The figures are based on preliminary statistics, and there may be minor differences between similar data in different sections or tables etc. All table headings and notes are given in both Swedish and English

  5. Disturbed security in Norway and Sweden

    Directory of Open Access Journals (Sweden)

    Wojciech Lieder

    2015-12-01

    Full Text Available The content of the article is an attempt to determine the course and consequences of terrorist attacks that took place in 2010 in Sweden and 2011 in Norway. A Comparative Study includes responses of societies and political elites of both countries.

  6. INOPS Survey data report for Sweden

    DEFF Research Database (Denmark)

    Lindholst, Andrej Christian; Severin, Majbritt Christine

    This data report provides statistics on the organization, management and performance of different ways of providing maintenance services within the municipal park and road sector(s) in Sweden. The statistics rely on data collected in the period from May 2015 to June 2015 through an online survey...

  7. Atomoxetine's Effect on Societal Costs in Sweden

    Science.gov (United States)

    Myren, Karl-Johan; Thernlund, Gunilla; Nylen, Asa; Schacht, Alexander; Svanborg, Par

    2010-01-01

    Objective: To compare societal costs between patients treated with atomoxetine and placebo in Sweden. Method: Ninety-nine pediatric ADHD patients were randomized to a 10-week double-blind treatment with atomoxetine (n = 49) or placebo (n = 50). All parents received four sessions of psycho-education. Parents filled out a resource utilization…

  8. Public Dialogue on Science in Sweden.

    Science.gov (United States)

    Dyring, Annagreta

    1988-01-01

    Explains how Sweden has proceeded to popularize science. Addresses topics dealing with policy, the energy debate, booklets with large circulation, computers and society, contacts between schools and research, building up small science centers, mass media, literary quality, children's responsibility, and some of the challenges. (RT)

  9. Consequences in Sweden of the Chernobyl accident

    International Nuclear Information System (INIS)

    Snihs, J.O.

    1986-01-01

    It summarizes the consequences in Sweden of the Chernobyl accident, describes the emergency response, the basis for decisions and countermeasures, the measurement strategies, the activity levels and doses and countermeasures and action levels used. Past and remaining problems are discussed and the major investigations and improvements are given. (author)

  10. The history of nuclear power in Sweden

    International Nuclear Information System (INIS)

    Larsson, K.E.

    1987-01-01

    The nuclear power developments in Sweden are reviewed, from the first initiatives to start research in the area in 1945 to the parliament decision in 1979 to phase out nuclear power by 2010. The article is primarily concerned with the political and R and D management aspects in the field. (L.E.)

  11. Reconsidering School Politics: Educational Controversies in Sweden

    Science.gov (United States)

    Fredholm, Axel

    2017-01-01

    School politics in Sweden has recently moved in a conservative direction, emphasising the importance of conventional school subjects, stronger teacher authority and more discipline in the classroom. At the same time, consensus on the utility of such measures is lacking in the school debate. The conservative approach is often criticised as…

  12. C. h. p. saves fuel in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Daugas, C F

    1979-04-01

    A combined heat and power plant based on a diesel generator to produce 12MW of electricity and 12MW of heat has successfully supplied the town of Skultuna in Sweden during the winter and has saved 3,700t of oil annually.

  13. Yoshio Nakajima. A Japanese Artist from Sweden

    DEFF Research Database (Denmark)

    Ørum, Tania

    2015-01-01

    Yoshio Nakajima is an interesting example of the globalisation of art. His education and early work as an artist took place in his native Japan, but continued in Europe where he has spent more than 30 years, mainly in provincial Sweden....

  14. Mobility of Knowledge as a Recognition Challenge: Experiences from Sweden

    Science.gov (United States)

    Andersson, Per; Fejes, Andreas

    2010-01-01

    This article focuses on the tensions between mobility, knowledge and recognition, and what the impact of migration could be on lifelong education and society. This is discussed with the case of Sweden as the starting point. The main issue in Sweden concerning migration is the admission of refugees. Sweden has had a relatively open policy…

  15. A clinical laboratory model for evaluating the acute effects of electronic "cigarettes": nicotine delivery profile and cardiovascular and subjective effects.

    Science.gov (United States)

    Vansickel, Andrea R; Cobb, Caroline O; Weaver, Michael F; Eissenberg, Thomas E

    2010-08-01

    Electronic "cigarettes" are marketed to tobacco users as potential reduced exposure products (PREP), albeit with little information regarding electronic cigarette user toxicant exposure and effects. This information may be obtained by adapting clinical laboratory methods used to evaluate other PREPs for smokers. Thirty-two smokers participated in four independent Latin-square ordered conditions that differed by product: own brand cigarette, "NPRO" electronic cigarettes (NPRO EC; 18 mg cartridge), "Hydro" electronic cigarettes (Hydro EC; 16 mg cartridge), or sham (unlit cigarette). Participants took 10 puffs at two separate times during each session. Plasma nicotine and carbon monoxide (CO) concentration, heart rate, and subjective effects were assessed. Own brand significantly increased plasma nicotine and CO concentration and heart rate within the first five minutes of administration whereas NPRO EC, Hydro EC, and sham smoking did not. Own brand, NPRO EC, and Hydro EC (but not sham) significantly decreased tobacco abstinence symptom ratings and increased product acceptability ratings. The magnitude of symptom suppression and increased acceptability was greater for own brand than for NPRO EC and Hydro EC. Under these acute testing conditions, neither of the electronic cigarettes exposed users to measurable levels of nicotine or CO, although both suppressed nicotine/tobacco abstinence symptom ratings. This study illustrates how clinical laboratory methods can be used to understand the acute effects of these and other PREPs for tobacco users. The results and methods reported here will likely be relevant to the evaluation and empirically based regulation of electronic cigarettes and similar products. (c)2010 AACR.

  16. Spot profile analysis and lifetime mapping in ultrafast electron diffraction: Lattice excitation of self-organized Ge nanostructures on Si(001

    Directory of Open Access Journals (Sweden)

    T. Frigge

    2015-05-01

    Full Text Available Ultrafast high energy electron diffraction in reflection geometry is employed to study the structural dynamics of self-organized Germanium hut-, dome-, and relaxed clusters on Si(001 upon femtosecond laser excitation. Utilizing the difference in size and strain state the response of hut- and dome clusters can be distinguished by a transient spot profile analysis. Surface diffraction from {105}-type facets provide exclusive information on hut clusters. A pixel-by-pixel analysis of the dynamics of the entire diffraction pattern gives time constants of 40, 160, and 390 ps, which are assigned to the cooling time constants for hut-, dome-, and relaxed clusters.

  17. Probing ultrafast changes of spin and charge density profiles with resonant XUV magnetic reflectivity at the free-electron laser FERMI.

    Science.gov (United States)

    Gutt, C; Sant, T; Ksenzov, D; Capotondi, F; Pedersoli, E; Raimondi, L; Nikolov, I P; Kiskinova, M; Jaiswal, S; Jakob, G; Kläui, M; Zabel, H; Pietsch, U

    2017-09-01

    We report the results of resonant magnetic XUV reflectivity experiments performed at the XUV free-electron laser FERMI. Circularly polarized XUV light with the photon energy tuned to the Fe M 2,3 edge is used to measure resonant magnetic reflectivities and the corresponding Q -resolved asymmetry of a Permalloy/Ta/Permalloy trilayer film. The asymmetry exhibits ultrafast changes on 240 fs time scales upon pumping with ultrashort IR laser pulses. Depending on the value of the wavevector transfer Q z , we observe both decreasing and increasing values of the asymmetry parameter, which is attributed to ultrafast changes in the vertical spin and charge density profiles of the trilayer film.

  18. Changes in the High-Latitude Topside Ionospheric Vertical Electron-Density Profiles in Response to Solar-Wind Perturbations During Large Magnetic Storms

    Science.gov (United States)

    Benson, Robert F.; Fainberg, Joseph; Osherovich, Vladimir; Truhlik, Vladimir; Wang, Yongli; Arbacher, Becca

    2011-01-01

    The latest results from an investigation to establish links between solar-wind and topside-ionospheric parameters will be presented including a case where high-latitude topside electron-density Ne(h) profiles indicated dramatic rapid changes in the scale height during the main phase of a large magnetic storm (Dst wind data obtained from the NASA OMNIWeb database indicated that the magnetic storm was due to a magnetic cloud. This event is one of several large magnetic storms being investigated during the interval from 1965 to 1984 when both solar-wind and digital topside ionograms, from either Alouette-2, ISIS-1, or ISIS-2, are potentially available.

  19. Sickness presenteeism in Norway and Sweden

    Directory of Open Access Journals (Sweden)

    Vegard Johansen

    2013-01-01

    Full Text Available Introduction: Sickness presenteeism (SP refers to the practice of going to work despite illness. This article describes the distribution of SP in Norway and Sweden. It also discusses relations between SP and various work characteristics and personal factors in the two countries. Methods: More than 2500 Norwegian and Swedish workers between 20 and 60 years of age answered a postal questionnaire. The Norwegian and Swedish samples are weighed and representative with regard to both variables of regional background and demography, but the response rate was low. The distribution of SP is measured by frequency (episodes in the previous year and by length (total days of SP in the previous year. This study employed binary and multinomial logistic regression to detect which factors influence the frequency of SP. Results: Fifty-five per cent of the respondents in Norway and Sweden practised SP in the previous year. The frequency of SP episodes is similar in the two countries. Further, respondents with low/medium income, physical work, and managerial responsibilities report SP more often in both countries. Non-western immigrants, the less educated, and those employed by others are overrepresented with SP in Norway. Neither gender nor age had any particular influence. Discussion: In accordance with previous studies, this study among Norwegian and Swedish workers suggests that some SP during a working year may be more common than no SP. Our analyses of determinants of SP present some previously undocumented differences. Divisions between sedentary versus physical work and management versus non-management were important for SP in Norway and Sweden. Moreover, non-western immigrants are overrepresented with SP in Norway, but this pattern does not prevail in Sweden. Some possible causes for non-western immigrants to report more SP are suggested in the article, but we need more research to follow up on the missing correlation between ethnic background and SP in

  20. Prediction of spur overlap time, radical yield profiles, and decomposition of trichloroethylene induced by various pulse types of electron beam

    International Nuclear Information System (INIS)

    Kim, D.-W.; Han, K.-C.; Lee, W.-K.; Ihm, S.-K.

    1996-01-01

    A kinetic model was suggested to compute the yield profiles of primary radicals generated from water radiolysis. For various cases including pulse radiolysis and steady irradiation time of spur overlap was computed in order to ensure homogeneity over the entire system. As a result, consistency to roughly first order kinetics was resulted for decomposition of 1 ppm trichloroethylene (TCE) and slight deviation from the linear model was predicted for 10 ppm TCE. (author)

  1. Profile measurements of the electron temperature on the ASDEX Upgrade, COMPASS, and ISTTOK tokamak using Thomson scattering, triple, and ball-pen probes

    Science.gov (United States)

    Adamek, J.; Müller, H. W.; Silva, C.; Schrittwieser, R.; Ionita, C.; Mehlmann, F.; Costea, S.; Horacek, J.; Kurzan, B.; Bilkova, P.; Böhm, P.; Aftanas, M.; Vondracek, P.; Stöckel, J.; Panek, R.; Fernandes, H.; Figueiredo, H.

    2016-04-01

    The ball-pen probe (BPP) technique is used successfully to make profile measurements of the electron temperature on the ASDEX Upgrade (Axially Symmetric Divertor Experiment), COMPASS (COMPact ASSembly), and ISTTOK (Instituto Superior Tecnico TOKamak) tokamak. The electron temperature is provided by a combination of the BPP potential (ΦBPP) and the floating potential (Vfl) of the Langmuir probe (LP), which is compared with the Thomson scattering diagnostic on ASDEX Upgrade and COMPASS. Excellent agreement between the two diagnostics is obtained for circular and diverted plasmas and different heating mechanisms (Ohmic, NBI, ECRH) in deuterium discharges with the same formula Te = (ΦBPP - Vfl)/2.2. The comparative measurements of the electron temperature using BPP/LP and triple probe (TP) techniques on the ISTTOK tokamak show good agreement of averaged values only inside the separatrix. It was also found that the TP provides the electron temperature with significantly higher standard deviation than BPP/LP. However, the resulting values of both techniques are well in the phase with the maximum of cross-correlation function being 0.8.

  2. Profile measurements of the electron temperature on the ASDEX Upgrade, COMPASS, and ISTTOK tokamak using Thomson scattering, triple, and ball-pen probes

    Energy Technology Data Exchange (ETDEWEB)

    Adamek, J., E-mail: adamek@ipp.cas.cz; Horacek, J.; Bilkova, P.; Böhm, P.; Aftanas, M.; Vondracek, P.; Stöckel, J.; Panek, R. [Institute of Plasma Physics, Prague (Czech Republic); Müller, H. W. [Max-Planck-Institute for Plasma Physics, Garching near Munich (Germany); Institute of Materials Chemistry & Research, University of Vienna, Vienna (Austria); Silva, C.; Fernandes, H.; Figueiredo, H. [Instituto de Plasmas e Fusão Nuclear, Instituto Superior Técnico, Universidade de Lisboa, 1049-001 Lisboa (Portugal); Schrittwieser, R.; Ionita, C.; Mehlmann, F.; Costea, S. [Institute for Ion Physics and Applied Physics, University of Innsbruck, Innsbruck (Austria); Kurzan, B. [Max-Planck-Institute for Plasma Physics, Garching near Munich (Germany)

    2016-04-15

    The ball-pen probe (BPP) technique is used successfully to make profile measurements of the electron temperature on the ASDEX Upgrade (Axially Symmetric Divertor Experiment), COMPASS (COMPact ASSembly), and ISTTOK (Instituto Superior Tecnico TOKamak) tokamak. The electron temperature is provided by a combination of the BPP potential (Φ{sub BPP}) and the floating potential (V{sub fl}) of the Langmuir probe (LP), which is compared with the Thomson scattering diagnostic on ASDEX Upgrade and COMPASS. Excellent agreement between the two diagnostics is obtained for circular and diverted plasmas and different heating mechanisms (Ohmic, NBI, ECRH) in deuterium discharges with the same formula T{sub e} = (Φ{sub BPP} − V{sub fl})/2.2. The comparative measurements of the electron temperature using BPP/LP and triple probe (TP) techniques on the ISTTOK tokamak show good agreement of averaged values only inside the separatrix. It was also found that the TP provides the electron temperature with significantly higher standard deviation than BPP/LP. However, the resulting values of both techniques are well in the phase with the maximum of cross-correlation function being 0.8.

  3. Profile measurements of the electron temperature on the ASDEX Upgrade, COMPASS, and ISTTOK tokamak using Thomson scattering, triple, and ball-pen probes

    International Nuclear Information System (INIS)

    Adamek, J.; Horacek, J.; Bilkova, P.; Böhm, P.; Aftanas, M.; Vondracek, P.; Stöckel, J.; Panek, R.; Müller, H. W.; Silva, C.; Fernandes, H.; Figueiredo, H.; Schrittwieser, R.; Ionita, C.; Mehlmann, F.; Costea, S.; Kurzan, B.

    2016-01-01

    The ball-pen probe (BPP) technique is used successfully to make profile measurements of the electron temperature on the ASDEX Upgrade (Axially Symmetric Divertor Experiment), COMPASS (COMPact ASSembly), and ISTTOK (Instituto Superior Tecnico TOKamak) tokamak. The electron temperature is provided by a combination of the BPP potential (Φ_B_P_P) and the floating potential (V_f_l) of the Langmuir probe (LP), which is compared with the Thomson scattering diagnostic on ASDEX Upgrade and COMPASS. Excellent agreement between the two diagnostics is obtained for circular and diverted plasmas and different heating mechanisms (Ohmic, NBI, ECRH) in deuterium discharges with the same formula T_e = (Φ_B_P_P − V_f_l)/2.2. The comparative measurements of the electron temperature using BPP/LP and triple probe (TP) techniques on the ISTTOK tokamak show good agreement of averaged values only inside the separatrix. It was also found that the TP provides the electron temperature with significantly higher standard deviation than BPP/LP. However, the resulting values of both techniques are well in the phase with the maximum of cross-correlation function being 0.8.

  4. An instructive comparison of Denmark and Sweden CO2 emissions

    International Nuclear Information System (INIS)

    Huffer, E.; Nifenecker, H.

    2007-02-01

    Denmark and Sweden are close neighbors, they have pretty much the same Climate, so that it is interesting to try to understand what makes them so different in their per capita GHG (Green House Gas) emissions from fuel combustion. Indeed, the CO 2 emissions of Denmark and Sweden are practically equal while the population of Sweden is much larger. Thus, the per capita CO 2 emissions of Denmark are 63 % larger than those of Sweden. Denmark resorts heavily to fossil fuels for its production of both its electric power and its industrial heat whereas Sweden resorts to other primary energy sources which are either renewable or do not emit CO 2 . True, Sweden is in a privileged situation for its access to hydro power and to biomass but Denmark could considerably reduce its CO 2 emissions if it were to call on nuclear power as Sweden has been doing. (A.L.B.)

  5. Measurements of electron density and temperature profiles in plasma produced by Nike KrF laser for laser plasma instability research

    Science.gov (United States)

    Oh, Jaechul; Weaver, J. L.; Karasik, M.; Chan, L. Y.

    2015-08-01

    A grid image refractometer (GIR) has been implemented at the Nike krypton fluoride laser facility of the Naval Research Laboratory. This instrument simultaneously measures propagation angles and transmissions of UV probe rays (λ = 263 nm, Δt = 10 ps) refracted through plasma. We report results of the first Nike-GIR measurement on a CH plasma produced by the Nike laser pulse (˜1 ns FWHM) with the intensity of 1.1 × 1015 W/cm2. The measured angles and transmissions were processed to construct spatial profiles of electron density (ne) and temperature (Te) in the underdense coronal region of the plasma. Using an inversion algorithm developed for the strongly refracted rays, the deployed GIR system probed electron densities up to 4 × 1021 cm-3 with the density scale length of 120 μm along the plasma symmetry axis. The resulting ne and Te profiles are verified to be self-consistent with the measured quantities of the refracted probe light.

  6. A current profile model for magnetic analysis of the start-up phase of toroidal plasmas driven by electron cyclotron heating and current drive

    International Nuclear Information System (INIS)

    Yoshinaga, T.; Uchida, M.; Tanaka, H.; Maekawa, T.

    2007-01-01

    An estimation model of plasma current density distribution for the start-up phase of toroidal plasmas generated by electron cyclotron heating (ECH) in the low aspect ratio torus experiment device is presented. The model assumes a power law parabolic current profile having seven fitting parameters. Its position, extent and broadness (or steepness) are fitted by adjusting these parameters to the observed magnetic flux signals. The adequacy of the model has been examined and confirmed by comparisons of the reconstructed current profiles and the resultant poloidal flux surfaces with the plasma images at visible light range at various stages of start-up discharges, including both the initial open field phase, the subsequent closed field phase, the current decay phase after ECH is turned off and also by a current-profile limiting experiment. This method may be useful for the study of non-inductive start-up experiments by ECH, where there is no appropriate MHD constraint on the current distribution as that in the full tokamak discharge plasmas

  7. Spatial profiling of degradation processes in hindered-amine-stabilized polymers by electron spin resonance imaging of nitroxides

    Czech Academy of Sciences Publication Activity Database

    Marek, Antonín; Kaprálková, Ludmila; Pfleger, Jiří; Pospíšil, Jan; Pilař, Jan

    2005-01-01

    Roč. 99, S (2005), s. 195-198 ISSN 0009-2770. [Meeting on Chemistry and Life /3./. Brno, 20.9.2005-22.9.2005] Institutional research plan: CEZ:AV0Z40500505 Keywords : polymer degradation * nitroxides * electron spin resonance imaging Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 0.445, year: 2005

  8. Nord Stream, Sweden and Baltic Sea Security

    Energy Technology Data Exchange (ETDEWEB)

    Larsson, Robert L

    2007-03-15

    In June 2006, FOI published the report: Sweden and the NEGP: a Pilot Study of the North European Gas Pipeline and Sweden's Dependence on Russian Energy, a base data report on a topic that FOI considered to be of rising importance. Much has happened since then and the NEGP has changed its name to Nord Stream and submitted an official notification on the intention of realising the project of constructing a gas pipeline from Russia to Germany via the Baltic Sea. The primary aim of this report is to discuss and analyse some of the core aspects of Nord Stream and the pipeline project with regard to the security situation for the Baltic Sea region. The report constitutes an updated version of the previous report. Most of the old report still stands valid, especially concerning the historical survey of Russia's energy policy, but the new report has additional chapters and is broader in scope concerning the consequences of the project

  9. Chlamydia psittaci in birds of prey, Sweden

    Directory of Open Access Journals (Sweden)

    Maria Blomqvist

    2012-05-01

    Full Text Available Background: Chlamydia psittaci is an intracellular bacterium primarily causing respiratory diseases in birds but may also be transmitted to other animals, including humans. The prevalence of the pathogen in wild birds in Sweden is largely unknown. Methods: DNA was extracted from cloacae swabs and screened for C. psittaci by using a 23S rRNA gene PCR assay. Partial 16S rRNA and ompA gene fragments were sequence determined and phylogenies were analysed by the neighbour-joining method. Results and conclusion: The C. psittaci prevalence was 1.3% in 319 Peregrine Falcons and White-tailed Sea Eagles, vulnerable top-predators in Sweden. 16S rRNA and ompA gene analysis showed that novel Chlamydia species, as well as novel C. psittaci strains, are to be found among wild birds.

  10. Nord Stream, Sweden and Baltic Sea Security

    International Nuclear Information System (INIS)

    Larsson, Robert L.

    2007-03-01

    In June 2006, FOI published the report: Sweden and the NEGP: a Pilot Study of the North European Gas Pipeline and Sweden's Dependence on Russian Energy, a base data report on a topic that FOI considered to be of rising importance. Much has happened since then and the NEGP has changed its name to Nord Stream and submitted an official notification on the intention of realising the project of constructing a gas pipeline from Russia to Germany via the Baltic Sea. The primary aim of this report is to discuss and analyse some of the core aspects of Nord Stream and the pipeline project with regard to the security situation for the Baltic Sea region. The report constitutes an updated version of the previous report. Most of the old report still stands valid, especially concerning the historical survey of Russia's energy policy, but the new report has additional chapters and is broader in scope concerning the consequences of the project

  11. The Y2K issue in Sweden

    International Nuclear Information System (INIS)

    Dahlin, G.; Ek, P.; Isaksson, S.; Ericsson, A.M.; Jaernry, C.

    1999-01-01

    The paper overviews the work performed in Sweden on the Y2K issue. It describes in summary how the work is done at the utilities, some lessons learned and the work performed by the regulatory body, the Swedish Power Inspectorate. It discusses as well, how the reporting and accountancy has been changed to meet the Y2K problem at the Swedish State Authority as well as at the Swedish nuclear facilities. There is a section describing the Physical Protection issues

  12. Transportation of radioactive materials in Sweden

    International Nuclear Information System (INIS)

    Ericsson, A.M.

    1979-06-01

    This report is designed to calculate the total risk due to shipping radioactive materials in Sweden. The base case developed is the shipment model that is used now or the best estimate for expected shipments. The model for the calculations and the computer program used has been developed at the Sandia Laboratories, Albuquerque, N.M., USA and is the same that was used for the NUREG-0170 study. The results from the calculations show an annual expected population dose of 30 person-rem due to normal transport conditions. The annual expected dose from accidents were calculated to be between 2.3-20.8 person rem. The higher figure represents the case where plutonium is shipped back to Sweden from reprocessing plants abroad in the form of PuO2 and the lower figure represent the case when plutonium is shipped back in the form of mixed oxide fuel. The total additional population dose in Sweden due to both normal and accident conditions in the transportation of radioactive materials will be 30 - 50 person rem/year. Compared to the natural background radiation that is 8x10 5 person rem per year in Sweden, this figure is very low. If converted to latent cancer fatalities this population dose will add approximately 3.5x10 3 cancers each year. The consequences due to accidents have been calculated and are discussed separately from their probabilities. The most severe accident that was found was an accident involving PuO 2 . This accident would give 82 400 rem as a maximum individual dose and 8.1x10 5 person rem as a population dose. (Auth.)

  13. Citizens and taxation : Sweden in comparative perspective

    OpenAIRE

    Edlund, Jonas

    1999-01-01

    In the contemporary critique of the welfare state a common target is taxation. The consequences of the high levels of taxes collected by the modern state, the critics argue, are slowdown in economic growth, high unemployment, and declining public legitimacy for taxes and state provided welfare. This thesis explores the political support for taxation in Sweden, the epitome of high-tax-society. The thesis consists of one introductory chapter and five journal articles. The first objective of the...

  14. Radon problems in Sweden. Investigations and countermeasures

    International Nuclear Information System (INIS)

    Snihs, J.O.; Ehdwall, H.

    1978-11-01

    For some years radon has been of great concern in Sweden both as a source of occupational exposure in mines and other underground spaces and as a source of radiation exposures in dwellings has lately increased to a considerable extent and appropriate measurements and possible countermeasures are under intensive discussion. The policy and general principles of the supervision especially at work places are described here with a brief description of the progress of the development work on measuring methods. (author)

  15. Evaluating the gender wage gap in Sweden

    OpenAIRE

    Malmberg, Åsa

    2007-01-01

    Using mainly quantile regressions, this paper evaluates the gender wage gap throughout the conditional wage distribution in Sweden. The gender wage is found to increase at the upper tail of the wage distribution, indicating an enforcement of the glass ceiling effect recorded in earlier studies. The results also indicate that the earlier noted trend of diminishing wage differences at the bottom of the wage distribution now is turning. The increase of overall wage inequalities coincides with a ...

  16. Electron temperature profiles in axial field 2.45 GHz ECR ion source with a ceramic chamber

    Science.gov (United States)

    Abe, K.; Tamura, R.; Kasuya, T.; Wada, M.

    2017-08-01

    An array of electrostatic probes was arranged on the plasma electrode of a 2.45 GHz microwave driven axial magnetic filter field type negative hydrogen (H-) ion source to clarify the spatial plasma distribution near the electrode. The measured spatial distribution of electron temperature indicated the lower temperature near the extraction hole of the plasma electrode corresponding to the effectiveness of the axial magnetic filter field geometry. When the ratio of electron saturation current to the ion saturation current was plotted as a function of position, the obtained distribution showed a higher ratio near the hydrogen gas inlet through which ground state hydrogen molecules are injected into the source. Though the efficiency in producing H- ions is smaller for a 2.45 GHz source than a source operated at 14 GHz, it gives more volume to measure spatial distributions of various plasma parameters to understand fundamental processes that are influential on H- production in this type of ion sources.

  17. Improving the automatic inversion of digital Alouette/ISIS ionogram reflection traces into topside electron density profiles

    Czech Academy of Sciences Publication Activity Database

    Benson, R. F.; Truhlík, Vladimír; Huang, X.; Wang, YL.; Bilitza, D.

    2012-01-01

    Roč. 47, č. 4 (2012), RS0L04/1-RS0L04/10 ISSN 0048-6604 R&D Projects: GA ČR GAP209/10/2086 Institutional support: RVO:68378289 Keywords : ionosphere * electron concentration * radio waves * solar activity Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 1.000, year: 2012 http://onlinelibrary.wiley.com/doi/10.1029/2011RS004963/abstract

  18. Uranium recovery in Sweden. History and perspective

    International Nuclear Information System (INIS)

    Hultgren, Aa.; Olsson, G.

    1993-08-01

    In 1945 the potential of nuclear energy for military and peaceful purpose had initiated a strong interest in Sweden to establish a national programme in the field. The Atomic Energy Committee was formed at the end of 1945 and charged the Research Institute of National Defence in January 1946 with the test to investigate possibilities of uranium recovery in Sweden. AB Atomenergi, a semi-state owned body, was formed in November 1947 to take charge of nuclear energy related research and development. The search for and the recovery of uranium from indigenous resources became a dominant objective over the first years of the company. The report gives a broad overview of the efforts to establish a national uranium fuel supply programme in Sweden from the early days of the postwar years of the 1940s. Process and plant development, plant operations at Kvarntorp and Ranstad, and the development of the uranium supply policy are presented against a background of the nuclear power development in the country. The nuclear weapons debate and the decision to sign the non proliferation treaty in 1968 are briefly reported. Special attention has been given an account of the technical development and the various projects related to the Ranstad plant and its final restoration in the 1980s

  19. Consequences in Sweden of the Chernobyl accident

    International Nuclear Information System (INIS)

    Haegg, Conny.

    1990-01-01

    The radiation doses to man in Sweden due to the Chernobyl accident originate mainly from external irradiation from deposited radionuclides and internal irradiation from consumption of radioactively contaminated food stuffs. Inhalation and external irradiation from the passing cloud give only a minor contribution to the total dose. As an average for the Swedish population the individual radiation dose during the first year amounts to about 0.1 mSv, i.e. 10% of the natural background radiation. In the most contaminated areas, however, the individual dose may become 30 times higher than the average dose. The dose committed over 50 years has estimated to be about six times as high as the first year dose. The collective dose for the Swedish population has been estimated to about 1300 manSv the first year after the accident and the corresponding dose over 50 years to 5000 to 7000 manSv. This could lead to 100 to 200 extra fatal cancers. Furthermore, no damages on man that can be related to Chernobyl fallout, e.g. pre-natal effects, have so far been observed in Sweden. Shortly after the accident, several research projects were initiated in Sweden in order to follow the distribution of radionuclides in the aquatic and terrestrial environment. The results which in many cases are preliminary, shows that the recovery of the ecosystem will take several decades. (author)

  20. Difference in electron thermal diffusivity and profile between interior and exterior of TFTR L-mode plasmas

    International Nuclear Information System (INIS)

    Hiroe, S.; Johnson, D.W.; Goldston, R.J.

    1990-01-01

    The local properties such as scale lengths of the electron density (L n e ), temperature (L T e ), and pressure (L p e ), and the electron thermal diffusivity χ e (r) (m 2 /s) for r/a > 0.3 have been studied for TFTR L-mode discharges under the assumption of χ e = χ i . The scale lengths and the electron thermal diffusivity in the interior 0.3 e can be expressed as (with correlation coefficient R = 0.61), χ e (r) = 1.44 x 10 18 (r/a) 1.0 T e (r) 0.1 q(r) 0.1 /n e 0.9 (r). In the exterior region (0.55 e can be described as (with R = 0.68), χ e (r) = 2.3 x 10 3 (r/a) 1.7 T e (r) 0.7 q(r) 0.8 /n e 0.2 (r). It is interesting to note the negative n e dependence of χ e in the interior and the positive T e dependence of χ e in the exterior

  1. Balloon observations of auroral X-rays at Esrange, Sweden and related phenomena

    OpenAIRE

    Hirasima,Yo; Murakami,Hiroyuki; Okudaira,Kiyoaki; Fujii,Masami; Nishimura,Jun; Yamagami,Takamasa; Ejiri,Masaki; Miyaoka,Hiroshi; Ono,Takayuki; Kodama,Masahiro

    1984-01-01

    Balloon observations of auroral X-rays using different detector systems were carried out twice over Esrange, Sweden, in November and December 1982,in order to examine spatial and temporal characteristics of the energetic component of auroral electrons. One detector is a telescope system consisting of four scintillation counters whose fields of view are different with each other as well as with the viewing directions. It is shown from the first flight carrying the telescope system that a limit...

  2. Probing ultrafast changes of spin and charge density profiles with resonant XUV magnetic reflectivity at the free-electron laser FERMI

    Directory of Open Access Journals (Sweden)

    C. Gutt

    2017-09-01

    Full Text Available We report the results of resonant magnetic XUV reflectivity experiments performed at the XUV free-electron laser FERMI. Circularly polarized XUV light with the photon energy tuned to the Fe M2,3 edge is used to measure resonant magnetic reflectivities and the corresponding Q-resolved asymmetry of a Permalloy/Ta/Permalloy trilayer film. The asymmetry exhibits ultrafast changes on 240 fs time scales upon pumping with ultrashort IR laser pulses. Depending on the value of the wavevector transfer Qz, we observe both decreasing and increasing values of the asymmetry parameter, which is attributed to ultrafast changes in the vertical spin and charge density profiles of the trilayer film.

  3. Modeling the Lower Part of the Topside Ionospheric Vertical Electron Density Profile Over the European Region by Means of Swarm Satellites Data and IRI UP Method

    Science.gov (United States)

    Pignalberi, A.; Pezzopane, M.; Rizzi, R.

    2018-03-01

    An empirical method to model the lower part of the ionospheric topside region from the F2 layer peak height to about 500-600 km of altitude over the European region is proposed. The method is based on electron density values recorded from December 2013 to June 2016 by Swarm satellites and on foF2 and hmF2 values provided by IRI UP (International Reference Ionosphere UPdate), which is a method developed to update the IRI model relying on the assimilation of foF2 and M(3000)F2 data routinely recorded by a network of European ionosonde stations. Topside effective scale heights are calculated by fitting some definite analytical functions (α-Chapman, β-Chapman, Epstein, and exponential) through the values recorded by Swarm and the ones output by IRI UP, with the assumption that the effective scale height is constant in the altitude range considered. Calculated effective scale heights are then modeled as a function of foF2 and hmF2, in order to be operationally applicable to both ionosonde measurements and ionospheric models, like IRI. The method produces two-dimensional grids of the median effective scale height binned as a function of foF2 and hmF2, for each of the considered topside profiles. A statistical comparison with Constellation Observing System for Meteorology, Ionosphere, and Climate/FORMOsa SATellite-3 collected Radio Occultation profiles is carried out to assess the validity of the proposed method and to investigate which of the considered topside profiles is the best one. The α-Chapman topside function displays the best performance compared to the others and also when compared to the NeQuick topside option of IRI.

  4. A procedure to analyze surface profiles of the protein molecules visualized by quick-freeze deep-etch replica electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kimori, Yoshitaka [Division of Biomolecular Imaging, Institute of Medical Science, The University of Tokyo, Minato-ku, Tokyo 108-8639 (Japan); Department of Bioscience and Bioinformatics, Kyushu Institute of Technology, Iizuka, Fukuoka 820-8502 (Japan); Oguchi, Yosuke [Department of Electric Engineering, Kogakuin University, Hachioji, Tokyo 192-0015 (Japan); Ichise, Norihiko [Department of Visual Communication, Komazawa Women' s University, Inagi, Tokyo 206-8511 (Japan); Baba, Norio [Department of Electric Engineering, Kogakuin University, Hachioji, Tokyo 192-0015 (Japan); Katayama, Eisaku [Division of Biomolecular Imaging, Institute of Medical Science, The University of Tokyo, Minato-ku, Tokyo 108-8639 (Japan)]. E-mail: ekatayam@ims.u-tokyo.ac.jp

    2007-01-15

    Quick-freeze deep-etch replica electron microscopy gives high contrast snapshots of individual protein molecules under physiological conditions in vitro or in situ. The images show delicate internal pattern, possibly reflecting the rotary-shadowed surface profile of the molecule. As a step to build the new system for the 'Structural analysis of single molecules', we propose a procedure to quantitatively characterize the structural property of individual molecules; e.g. conformational type and precise view-angle of the molecules, if the crystallographic structure of the target molecule is available. This paper presents a framework to determine the observed face of the protein molecule by analyzing the surface profile of individual molecules visualized in freeze-replica specimens. A comprehensive set of rotary-shadowed views of the protein molecule was artificially generated from the available atomic coordinates using light-rendering software. Exploiting new mathematical morphology-based image filter, characteristic features were extracted from each image and stored as template. Similar features were extracted from the true replica image and the most likely projection angle and the conformation of the observed particle were determined by quantitative comparison with a set of archived images. The performance and the robustness of the procedure were examined with myosin head structure in defined configuration for actual application.

  5. A procedure to analyze surface profiles of the protein molecules visualized by quick-freeze deep-etch replica electron microscopy

    International Nuclear Information System (INIS)

    Kimori, Yoshitaka; Oguchi, Yosuke; Ichise, Norihiko; Baba, Norio; Katayama, Eisaku

    2007-01-01

    Quick-freeze deep-etch replica electron microscopy gives high contrast snapshots of individual protein molecules under physiological conditions in vitro or in situ. The images show delicate internal pattern, possibly reflecting the rotary-shadowed surface profile of the molecule. As a step to build the new system for the 'Structural analysis of single molecules', we propose a procedure to quantitatively characterize the structural property of individual molecules; e.g. conformational type and precise view-angle of the molecules, if the crystallographic structure of the target molecule is available. This paper presents a framework to determine the observed face of the protein molecule by analyzing the surface profile of individual molecules visualized in freeze-replica specimens. A comprehensive set of rotary-shadowed views of the protein molecule was artificially generated from the available atomic coordinates using light-rendering software. Exploiting new mathematical morphology-based image filter, characteristic features were extracted from each image and stored as template. Similar features were extracted from the true replica image and the most likely projection angle and the conformation of the observed particle were determined by quantitative comparison with a set of archived images. The performance and the robustness of the procedure were examined with myosin head structure in defined configuration for actual application

  6. Leaving Sweden behind: Gains in life expectancy in Canada.

    Science.gov (United States)

    Auger, Nathalie; Le Serbon, Emilie; Rostila, Mikael

    2015-06-01

    Sweden and Canada are known for quality of living and exceedingly high life expectancy, but recent data on how these countries compare are lacking. We measured life expectancy in Canada and Sweden during the past decade, and identified factors responsible for changes over time. We calculated life expectancy at birth for Canada and Sweden annually from 2000 to 2010, and determined the ages and causes of death responsible for the gap between the two countries using Arriaga's method. We determined how population growth, ageing, and mortality influenced the number of deaths over time. During 2000-2010, life expectancy in Canada caught up with Sweden for men, and surpassed Sweden by 0.4 years for women. Sweden lost ground owing to a slower reduction in circulatory and tumour mortality after age 65 years compared with Canada. Nonetheless, population ageing increased the number of deaths in Canada, especially for mental and nervous system disorders. In Sweden, the number of deaths decreased. In only one decade, life expectancy in Canada caught up and surpassed Sweden due to rapid improvements in circulatory and tumour mortality. Population ageing increased the number of deaths in Canada, potentially stressing the health care system more than in Sweden. © 2015 the Nordic Societies of Public Health.

  7. Composition of atmospheric precipitation in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Emanuelsson, A; Eriksson, E; Egner, H

    1954-01-01

    Preliminary charts are presented based on two years of data, to demonstrate the geographic distribution over Sweden of the annual amounts of Na, Cl, K, Ca, NH/sub 3//sup -n/, and NO/sub 3//sup -n/ brought to the surface of the earth by precipitation. The ratios of these total amounts to the total amounts of Na deposited during the same time interval are shown to possess systematic geographic distribution patterns. Comparisons are made between these ratios and the corresponding quantities in sea water. The investigation is now being resumed to provide additional data from a larger number of stations and for longer time periods.

  8. Industrial action in Sweden - a new pattern?

    OpenAIRE

    Lindberg, Henrik

    2011-01-01

    The paper studies the modern conflict patterns and conflict dimensions in Sweden 1993-2005. The aim is to trace and interpret the new patterns and dimensions of labour market conflict by collecting and compiling strike data from the National Conciliation Office, (1993-99) and the National Mediation Office (2000-2005). On the whole, strike activity has decreased steadily from the 1980s and onwards and in large parts of the Swedish labour market conflicts are very rare. A few small un-ions orga...

  9. Buildings with enhanced radioactivity in Sweden

    International Nuclear Information System (INIS)

    Swedjemark, G.A.

    1980-12-01

    Enhanced radon/radon daughter concentrations indoors have been found in some houses in Sweden, especially in combination with low air exchange rates. The radon sources have been found to be some types of building materials, some types of filling materials, some types of ground and any combination of these sources. The radon source may also be radon-rich tap water. The same types of building materials also give an enhanced gamma radiation level. In all houses, both lower and higher concentrations of radon than the average levels given here have been found in individual rooms and with single measurements. (author)

  10. PRE-HOSPITAL EMERGENCY CARE IN SWEDEN

    Directory of Open Access Journals (Sweden)

    Ulf BJÖRNSTIG

    2004-01-01

    In Sweden (9 million inhabitants, a sparsely populated country with sometimes long transportation distances to the nearest trauma hospital, 800 ambulances, 7 ambulance helicopters and 3–5 fixed wing ambulance aircraft are the available transport resources. In case of a mass casualty or disaster situation, inside or outside the country, a governmental project (Swedish National Medevac aims to convert a passenger aircraft from Scandinavian Airlines System (SAS to a qualified medical resource for long distance transport, with capacity to nurse six intensive care patients and an additional 6–20 lieing or seated patients during transport.

  11. Household energy demand. Empirical studies concerning Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Dargay, J; Lundin, A

    1978-06-01

    This paper investigates the effects of energy policy on households in Sweden and provides the material necessary for evaluation of current and proposed energy-conservation measures. Emphasis is placed on the impact of enery taxation or price changes on household demand for electricity, heating oil, and gasoline and the consequences of such measures for income distribution. The results of the Swedish studies of household demand for heating oil and gasoline indicate that price changes can have a considerable long run impact on fuel utilization. In the short run, price responsiveness is notably reduced, but it is nevertheless of consequence for energy demand.

  12. National Debate and Public Confidence in Sweden

    International Nuclear Information System (INIS)

    Lindquist, Ted

    2014-01-01

    Ted Lindquist, coordinator of the Association of Swedish Municipalities with Nuclear Facilities (KSO), closed the first day of conferences. He showed what the nuclear landscape was in Sweden, and in particular that through time there has been a rather good support from the population. He explained that the reason could be the confidence of the public in the national debate. On a more local scale, Ted Lindquist showed how overwhelmingly strong the support was in towns where the industry would like to operate long-term storage facilities

  13. This is how we manage Sweden`s radioactive waste. Activities 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    SKB operates systems and facilities for the management and final disposal of spent nuclear fuel and other radioactive waste in Sweden. SKB has conducted extensive R, D and D work with regard to constructing a spent fuel encapsulation plant and a deep repository in crystalline bedrock. This annual report treats all the different activities without going into technical details.

  14. Electron and positron contributions to the displacement per atom profile in bulk multi-walled carbon nanotube material irradiated with gamma rays

    International Nuclear Information System (INIS)

    Leyva Fabelo, Antonio; Pinnera Hernandez, Ibrahin; Leyva Pernia, Diana

    2013-01-01

    The electron and positron contributions to the effective atom displacement cross-section in multi-walled carbon nanotube bulk materials exposed to gamma rays were calculated. The physical properties and the displacement threshold energy value reported in literature for this material were taken into account. Then, using the mathematical simulation of photon and particle transport in matter, the electron and positron energy flux distributions within the irradiated object were also calculated. Finally, considering both results, the atom displacement damage profiles inside the analyzed bulk carbon nanotube material were determined. The individual contribution from each type of secondary particles generated by the photon interactions was specified. An increasing behavior of the displacement cross-sections for all the studied particles energy range was observed. The particles minimum kinetic energy values that make probabilistically possible the single and multiple atom displacement processes were determined. The positrons contribution importance to the total number of point defects generated during the interaction of gamma rays with the studied materials was confirmed

  15. The Electronic Presentation: A Status Report of International Use.

    Science.gov (United States)

    Griffin, Robert E.; And Others

    This paper describes how electronic presentations are currently used by business people. Business people in the United States and Sweden were surveyed to determine how they are using the medium. A questionnaire was mailed to 506 business people in the United States (201 returned) and to 80 business people in Sweden (76 returned). Results are…

  16. Domestic gender equality and childbearing in Sweden

    Directory of Open Access Journals (Sweden)

    Frances Goldscheider

    2013-12-01

    Full Text Available Background: Sweden, which is among the most gender-equal societies in the world, combines 'modern' family patterns such as unmarried cohabitation, delayed parenthood, high maternal labor force participation, and high break-up rates - all usually linked with low birth rates - with relatively high fertility. Sweden also has a high level of shared parental responsibility for home and children. Objective: After decades of late 20th century research showing that increasing gender equality in the workplace was linked with lower fertility, might gender equality in the home increase fertility? Methods: Using data from the Swedish Young Adult Panel Study (YAPS, we use Cox regression to examine the effects on first, second, and third births of 1 holding attitudes about sharing equally in the care of the home and children, and 2 actual sharing in these domestic tasks. Results: Our analysis shows that, measuring attitudes before the transition to parenthood and actual practice four years later, it is inconsistency between sharing attitudes and the actual division of housework that reduces the likelihood of continued childbearing, especially on second births among women. Conclusions: As women are most likely to confront an inconsistent situation, with egalitarian ideals in a household without equal sharing, it is clear that having a partner who does not share housework is depressing Swedish fertility.

  17. Space education in Kiruna, Northern Sweden

    Directory of Open Access Journals (Sweden)

    I. Sandahl

    2005-01-01

    Full Text Available The town of Kiruna in the north of Sweden has a concentration of space activities and space research with, for example, the Swedish Institute of Space Physics, Esrange, the ESA Salmijärvi satellite station, and EISCAT (European Incoherent Scatter Radar Scientific Association. The Department of Space Science is a joint department between the two most northern universities in Sweden, Luleå University of Technology and Umeå University in collaboration with the Swedish Institute of Space Physics. It offers a range of education programmes in the space field. There are bachelor and master programmes in space engineering, and a bridging programme for students without a science background from secondary school. The Department also contributes to courses for teachers, Ph.D. courses and secondary school level courses. One master´s program and a three week summer course are given entirely in English and welcome international students. Thanks to good cooperation with Esrange students can build and fly experiments on high altitude balloons and sounding rockets and also take a large responsibility for the management of the projects. Close interaction with research and industry is an important part of the education.

  18. Situation of nuclear power generation in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Sandstroem, S [Swedish Atomic Forum

    1978-01-01

    In Sweden, nuclear power generation was received initially favorably. In the end of 1960s, however, nuclear power generation got involved in the activities of environment preservation. Then, political parties became opposed to nuclear power generation, and now, the need of nuclear power generation itself is regarded as questionable. In the general election in 1976, the Government opposing the nuclear power generation won. As the result, the conditional nuclear power development law and the energy committee were set up. The committee composed of parliament members, experts, and representatives of enterprises and trade unions is to submit its report so that the parliament can prepare a new energy program in the fall of 1978. Meanwhile, the nuclear fuel safety project formed newly has studied to satisfy the conditions of the law. In Sweden, which has developed nuclear reactors independently from the technology of USA, the oppositions are on the decrease, however. It is awaited what decision will be made by the Government in this fall.

  19. Sweden: Combining childbearing and gender equality

    Directory of Open Access Journals (Sweden)

    Eva Bernhardt

    2008-07-01

    Full Text Available Sweden is the forerunner of the Second Demographic Transition. Fertility trends have fluctuated greatly since the 1960s, and the 1990s showed both European-highest and lowest-ever-in-Sweden levels, while the cohort pattern has been relatively stable. Period fluctuations have been accompanied by a postponement of entering committed partnerships and parenthood as well as an increasing instability of family relationships. The awareness and the availability of effective contraceptives have been extensive since the mid-1970s, the year the liberal abortion law was introduced. Post-modern values are dominant in this highly secularized society, but ideal family size is among the highest in the European Union, and childlessness has remained at a relatively low level. Ethnic diversification has increased over time, with about one-fifth of the population having a 'foreign background' in the early 2000s. The level of female labor-force participation is the highest in Europe (although mothers of pre-schoolers often work part-time, and young women are just as highly educated as men. Family policies, based on the principle of equality across social groups and gender, seem to play an important role in keeping fertility relatively high. In combination with other factors, family policies also play a role in the fluctuations of fertility rates, as eligibility to parental-leave and benefits as well as the availability of public childcare are linked to parents' labor-force attachment.

  20. Sweden to host a new neutron source

    CERN Multimedia

    Anaïs Schaeffer

    2012-01-01

    The first European neutron source, currently under development, should commence operations by the end of this decade. Its aim: to produce beams of neutrons that can penetrate into the heart of matter without damaging it and reveal its secrets.   An artist's impression of what the ESS should look like in 2019. At the southern end of Sweden, a town called Lund is preparing for the arrival of the world's most powerful neutron source: the European Spallation Source (ESS). Construction is scheduled to start at the beginning of next year, and the facility is expected to become operational by 2019, when it will produce its first neutron beams. “The ESS is the result of an idea that began 20 years ago!” underlines Mats Lindroos, in charge of the ESS Accelerator Division. “Today, 17 European countries support the project, including Sweden, Denmark and Norway, who together account for 50% of the construction funding.” The ESS, whose design is al...

  1. Nord Stream, Sweden and Baltic Sea Security

    Energy Technology Data Exchange (ETDEWEB)

    Larsson, Robert L.

    2007-03-15

    In June 2006, FOI published the report: Sweden and the NEGP: a Pilot Study of the North European Gas Pipeline and Sweden's Dependence on Russian Energy, a base data report on a topic that FOI considered to be of rising importance. Much has happened since then and the NEGP has changed its name to Nord Stream and submitted an official notification on the intention of realising the project of constructing a gas pipeline from Russia to Germany via the Baltic Sea. The primary aim of this report is to discuss and analyse some of the core aspects of Nord Stream and the pipeline project with regard to the security situation for the Baltic Sea region. The report constitutes an updated version of the previous report. Most of the old report still stands valid, especially concerning the historical survey of Russia's energy policy, but the new report has additional chapters and is broader in scope concerning the consequences of the project

  2. New Forms of Youth Participation and Work in Sweden.

    Science.gov (United States)

    Hartmann, Jurgen

    1985-01-01

    Surveys past and current youth employment and social participation programs in Sweden. Maintains that while these were effective in giving Sweden one of the lowest youth unemployment rates among market-economy nations, more must be done to ensure meaningful social participation of youth in the community. (JDH)

  3. Occupational doses and ALARA - recent developments in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Godas, T.; Viktorsson, C. [Swedish Radiation Protection Institute, Stockholm (Sweden)

    1995-03-01

    Sweden has traditionally experienced very slow doses to workers in the nuclear industry. However, this trend has since last year been broken mainly due to significant maintenance and repair work. This paper will describe occupational dose trends in Sweden and discuss actions that are being implemented to control this new situation.

  4. General equilibrium effects of increasing carbon taxes in Sweden

    International Nuclear Information System (INIS)

    Harrison, G.W.; Kristroem, B.

    1997-01-01

    Sweden was one of the first countries to introduce carbon taxes, and is currently evaluating further carbon taxes. The authors were asked to advise a government commission charged with undertaking the official Swedish evaluation. We did so by constructing and simulating a computable general equilibrium model of Sweden. In this report, the carbon tax debate in Sweden is first reviewed, then our model is described and the main results presented. The conclusion from the cost-benefit analysis is clear, the benefits of increasing the carbon tax in Sweden are a tiny fraction of the costs that consumers must pay in the form of higher prices and reduced incomes. Although we do not put much credence in the gross benefit numbers, they do serve to highlight the basis of our conclusion that carbon tax increases are not currently justifiable in Sweden. 35 refs., 13 tabs

  5. General equilibrium effects of increasing carbon taxes in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, G W [South Carolina Univ., Columbia, SC (United States). Dept. of Economics, College of Business Administration; Kristroem, B [Swedish Univ. of Agricultural Sciences, Umeaa (Sweden). Dept. of Forest Economics

    1997-09-01

    Sweden was one of the first countries to introduce carbon taxes, and is currently evaluating further carbon taxes. The authors were asked to advise a government commission charged with undertaking the official Swedish evaluation. We did so by constructing and simulating a computable general equilibrium model of Sweden. In this report, the carbon tax debate in Sweden is first reviewed, then our model is described and the main results presented. The conclusion from the cost-benefit analysis is clear, the benefits of increasing the carbon tax in Sweden are a tiny fraction of the costs that consumers must pay in the form of higher prices and reduced incomes. Although we do not put much credence in the gross benefit numbers, they do serve to highlight the basis of our conclusion that carbon tax increases are not currently justifiable in Sweden. 35 refs., 13 tabs.

  6. Implementation of a cloud-based electronic medical record exchange system in compliance with the integrating healthcare enterprise's cross-enterprise document sharing integration profile.

    Science.gov (United States)

    Wu, Chien Hua; Chiu, Ruey Kei; Yeh, Hong Mo; Wang, Da Wei

    2017-11-01

    In 2011, the Ministry of Health and Welfare of Taiwan established the National Electronic Medical Record Exchange Center (EEC) to permit the sharing of medical resources among hospitals. This system can presently exchange electronic medical records (EMRs) among hospitals, in the form of medical imaging reports, laboratory test reports, discharge summaries, outpatient records, and outpatient medication records. Hospitals can send or retrieve EMRs over the virtual private network by connecting to the EEC through a gateway. International standards should be adopted in the EEC to allow users with those standards to take advantage of this exchange service. In this study, a cloud-based EMR-exchange prototyping system was implemented on the basis of the Integrating the Healthcare Enterprise's Cross-Enterprise Document Sharing integration profile and the existing EMR exchange system. RESTful services were used to implement the proposed prototyping system on the Microsoft Azure cloud-computing platform. Four scenarios were created in Microsoft Azure to determine the feasibility and effectiveness of the proposed system. The experimental results demonstrated that the proposed system successfully completed EMR exchange under the four scenarios created in Microsoft Azure. Additional experiments were conducted to compare the efficiency of the EMR-exchanging mechanisms of the proposed system with those of the existing EEC system. The experimental results suggest that the proposed RESTful service approach is superior to the Simple Object Access Protocol method currently implemented in the EEC system, according to the irrespective response times under the four experimental scenarios. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Climate impact from peat utilisation in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Uppenberg, S.; Zetterberg, L.; Aahman, M.

    2001-08-01

    The climate impact from the use of peat for energy production in Sweden has been evaluated in terms of contribution to atmospheric radiative forcing. This was done by attempting to answer the question 'What will be the climate impact if one would use 1 m{sup 2} of mire for peat extraction during 20 years?'. Two different methods of after-treatment were studied: afforestation and restoration of wetland. The climate impact from a peatland - wetland energy scenario and a peatland - forestry energy scenario was compared to the climate impact from coal, natural gas and forest residues. Sensitivity analyses were performed to evaluate which parameters that are important to take into consideration in order to minimize the climate impact from peat utilisation.

  8. Documents and legal texts: Australia, Germany, Sweden

    International Nuclear Information System (INIS)

    Anon.

    2012-01-01

    Australia: National Radioactive Waste Management Act 2012 No. 29, 2012 (An Act to make provision in relation to the selection of a site for, and the establishment and operation of, a radioactive waste management facility, and for related purposes). Germany: Act on the Peaceful Utilisation of Atomic Energy and the Protection against its Hazards (Atomic Energy Act) of 23 December 1959, as amended and promulgated on 15 July 1985, last amendment by the Act of 8 November 2011. Sweden: The Swedish Radiation Safety Authority's regulations concerning clearance of materials, rooms, buildings and land in practices involving ionising radiation (Swedish Radiation Safety Authority Regulatory Code issued on 20 October 2011, Published on 2 November 2011); The Swedish Radiation Safety Authority's general advice on the application of the regulations concerning clearance of materials, rooms, buildings and land in practices involving ionising radiation (issued on 20 October 2011)

  9. Time trends in human fecundability in Sweden

    DEFF Research Database (Denmark)

    Scheike, Thomas H; Rylander, Lars; Carstensen, Lisbeth

    2008-01-01

    ,000 primiparous women 20 years of age and older in the nationwide Swedish Medical Birth Registry from 1983 through 2002. This age restriction led to an exclusion of 10% of primiparous pregnancies. Subfertility (TTP > or =1 year) was analyzed as a function of maternal age, calendar time at initiation of attempt...... increased with age, except that for women in their late 1930s, an apparent decrease was observed, particularly among the early cohorts. CONCLUSION: We found decreasing subfertility over time. We speculate that these patterns might be related to a Sweden-specific decrease over time in sexually transmitted...... diseases, to changes in sexual behavior induced by socioeconomic conditions, or to broader biologic or educational trends....

  10. Reprocessing in Sweden: History and perspective

    International Nuclear Information System (INIS)

    Hultgren, Aa.; Oesterlund, C.G.

    1990-10-01

    Against the background of nuclear power development and installation in Sweden an overview is presented of the parallel domestic development of the reprocessing of spent nuclear fuel. The original selection of the natural uranium - heavy water reactor in the 1950s included spent fuel reprocessing and recycle, and process and plant studies were performed to that end. The switch to light water reactors in the 1960s did not change the planning to recycle; however, the participation in the Eurochemic undertaking, and the delay in the nuclear programme stopped further domestic development work. A number of governmental committee investigations in the 1970s on the radioactive waste issue and, above all, the decision to phase out nuclear power by 2010, after a referendum following the TMI-accident, finally resulted in a decision to plan only for direct disposal of spent nuclear fuel. This policy still prevails. (42 refs.)

  11. Media use in distance education in Sweden

    Directory of Open Access Journals (Sweden)

    Norman F. Davies

    2013-02-01

    Full Text Available This article gives an overview of distance language teaching which developed rapidly in Sweden after the Second World War. It argues that so far little use has been made of technical aids and that the computer as such is still a stranger both to the language teacher and the student. The writer concludes that perhaps the time has come for a technical revolution amongst Arts students. Met hierdie artikel word 'n oorsig gegee oor afstandsonderrig-spesifiek wat tale betref-soos dit in Swede ontwikkel het na die Tweede Wereldoorlog. Daar word op gewys dat tot dusver min gebruik gemaak is van tegniese hulpmiddels en dat vera! die rekenaar onderbenut is. Die skrywer sluit met die gedagte dat die tyd moontlik ryp is vir 'n tegnologiese rewolusie"in die geledere van die Lettere en Wysbegeerte.

  12. Selling eugenics: the case of Sweden.

    Science.gov (United States)

    Bjorkman, Maria; Widmalm, Sven

    2010-12-20

    This paper traces the early (1910s to 1920s) development of Swedish eugenics through a study of the social network that promoted it. The eugenics network consisted mainly of academics from a variety of disciplines, but with medicine and biology dominating; connections with German scientists who would later shape Nazi biopolitics were strong. The paper shows how the network used political lobbying (for example, using contacts with academically accomplished MPs) and various media strategies to gain scientific and political support for their cause, where a major goal was the creation of a eugenics institute (which opened in 1922). It also outlines the eugenic vision of the institute's first director, Herman Lundborg. In effect the network, and in particular Lundborg, promoted the view that politics should be guided by eugenics and by a genetically superior elite. The selling of eugenics in Sweden is an example of the co-production of science and social order.

  13. Climate impact from peat utilisation in Sweden

    International Nuclear Information System (INIS)

    Uppenberg, S.; Zetterberg, L.; Aahman, M.

    2001-08-01

    The climate impact from the use of peat for energy production in Sweden has been evaluated in terms of contribution to atmospheric radiative forcing. This was done by attempting to answer the question 'What will be the climate impact if one would use 1 m 2 of mire for peat extraction during 20 years?'. Two different methods of after-treatment were studied: afforestation and restoration of wetland. The climate impact from a peatland - wetland energy scenario and a peatland - forestry energy scenario was compared to the climate impact from coal, natural gas and forest residues. Sensitivity analyses were performed to evaluate which parameters that are important to take into consideration in order to minimize the climate impact from peat utilisation

  14. Landscape Epidemiology of Tularemia Outbreaks in Sweden

    Science.gov (United States)

    Svensson, Kerstin; Bäck, Erik; Eliasson, Henrik; Berglund, Lennart; Granberg, Malin; Karlsson, Linda; Larsson, Pär; Forsman, Mats

    2009-01-01

    Summer outbreaks of tularemia that occurred from 1995 through 2005 in 2 locations in Sweden affected 441 persons. We performed an epidemiologic investigation of these outbreaks using a novel strategy, involving high-resolution genotyping of Francisella tularensis isolates obtained from 136 patients (using 18 genetic markers developed from 6 F. tularensis genome sequences) and interviews with the patients. Strong spatial associations were found between F. tularensis subpopulations and the places of disease transmission; infection by some subpopulations occurred within areas as small as 2 km2, indicating unidentified environmental point sources of tularemia. In both locations, disease clusters were associated with recreational areas beside water, and genetic subpopulations were present throughout the tularemia season and persisted over years. High-resolution genotyping in combination with patients’ statements about geographic places of disease transmission provided valuable indications of likely sources of infection and the causal genotypes during these tularemia outbreaks. PMID:19961673

  15. Physical protection philosophy and techniques in Sweden

    International Nuclear Information System (INIS)

    Dufva, B.

    1988-01-01

    The circumstances for the protection of nuclear power plants are special in Sweden. A very important factor is that armed guards at the facilities are alien to the Swedish society. They do not use them. The Swedish concept of physical protection accepts that the aggressor will get into the facility. With this in mind, the Swedish Nuclear Power Inspectorate (SKI) has established the policy that administrative, technical, and organizational measures will be directed toward preventing an aggressor from damaging the reactor, even if he has occupied the facility. In addition, the best conditions possible shall be established for the operator and the police to reoccupy the plant. The author believes this policy is different from that of many other countries. Therefore, he focusses on the Swedish philosophy and techniques for the physical protection of nuclear power plants

  16. Wind Power Statistics Sweden 2009; Vindkraftstatistik 2009

    Energy Technology Data Exchange (ETDEWEB)

    2010-04-15

    In 2009, wind power produced 2.5 TWh, an increase of 26 percent over the previous year. Throughout the period 2003-2009 has production of electricity from wind power almost quadrupled. Sweden's total net production of electricity amounted, according to provisional statistics for 2009, to 133.7 TWh. The year 2007 wind energy's share passed 1.0 percent of total net production of electricity for the first time. In 2008 the proportion was 1.4 percent, and in 2009 to almost 1.9 percent of total net production. Total installed power 2009 was 1448 MW and the number of plants was 1359, an inckW{sub pse} with 363 MW and 198 resp. from 2008. In 2009, there were three main support system for wind power in Sweden: the certificate system; the wind pilot project; and the environmental bonus. The electricity certificate system is a market-based support system for electricity generation from renewables which includes wind power as one of the approved techniques. The system was introduced in 2003 and aims to increase the production of electricity from renewable energy sources by 25 TWh from 2002 levels by 2020.. Wind pilot support is a support to the market for large-scale wind power. Support aims to reduce the cost of the creation of new wind energy and promoting new technologies. Wind Pilot Aid, which has existed since 2003, has been extended until in 2012 and has increased by 350 million SEK (about 36 M Euro) for the period 2008-2012. The environmental bonus, which means a tax subsidy, has been stepped down for each year until and by the year 2009, which was the last year. In 2009, environmental bonus was 0.12 SEK/kWh for electricity from offshore wind. For onshore wind power the environmentally bonus ceased in 2008

  17. Osmium in environmental samples from Northeast Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Rodushkin, Ilia [Division of Applied Geology, Lulea University of Technology, S-971 87 Lulea (Sweden); ALS Laboratory Group, ALS Analytica AB, Aurorum 10, S-977 75 Lulea (Sweden)], E-mail: ilia.rodushkin@alsglobal.com; Engstroem, Emma [Division of Applied Geology, Lulea University of Technology, S-971 87 Lulea (Sweden); Soerlin, Dieke; Ponter, Christer; Baxter, Douglas C. [ALS Laboratory Group, ALS Analytica AB, Aurorum 10, S-977 75 Lulea (Sweden)

    2007-11-01

    Osmium (Os) concentrations and {sup 187}Os/{sup 188}Os isotope abundance ratios are presented for sedimentary materials, soils, humus, plants, mushrooms, mosses and lichens collected in the vicinity of the town of Lulea, Northeast Sweden, the data for biological specimens being the first reported. Contributions from sampling and varying exposure time to the observed environmental variability were evaluated. Sedimentary materials (from both fresh and brackish water) are most elevated in radiogenic {sup 187}Os, followed by inorganic soil horizons, mushrooms and humus. The Os isotopic compositions of plants, mosses and lichens are much less radiogenic, with mean {sup 187}Os/{sup 188}Os lying within a relatively narrow 0.3-0.6 range. Significant temporal variations in Os concentrations and isotopic compositions of plant samples are attributed to integrative uptake of airborne Os with non-radiogenic composition. Measured Os concentrations in biological matrices increase in the order: small shrub leaves (blueberry and lingonberry) {<=} spruce needles {<=} mushrooms {<=} tree leaves {<=} pine needles < mosses << lichens. The concentrations found in three different species of plant were used to provide the first estimates of gaseous osmium tetroxide (OsO{sub 4}) in the environment. Though the Os content of samples from Northeast Sweden does not differ significantly from matrix-matched international reference materials (not certified for Os) of abiotic origin, the estimates of gaseous OsO{sub 4} concentrations are roughly an order of magnitude higher than have been reported for particle-bound Os in other studies. The pronounced spatial variations between relatively closely situated sites in mean {sup 187}Os/{sup 188}Os ratios for samples of the same species (presumably with the same dominating uptake mechanism) point to the presence of different local Os sources. This study therefore demonstrates that emissions of Os from automobile catalytic converters are not the only

  18. Osmium in environmental samples from Northeast Sweden

    International Nuclear Information System (INIS)

    Rodushkin, Ilia; Engstroem, Emma; Soerlin, Dieke; Ponter, Christer; Baxter, Douglas C.

    2007-01-01

    Osmium (Os) concentrations and 187 Os/ 188 Os isotope abundance ratios are presented for sedimentary materials, soils, humus, plants, mushrooms, mosses and lichens collected in the vicinity of the town of Lulea, Northeast Sweden, the data for biological specimens being the first reported. Contributions from sampling and varying exposure time to the observed environmental variability were evaluated. Sedimentary materials (from both fresh and brackish water) are most elevated in radiogenic 187 Os, followed by inorganic soil horizons, mushrooms and humus. The Os isotopic compositions of plants, mosses and lichens are much less radiogenic, with mean 187 Os/ 188 Os lying within a relatively narrow 0.3-0.6 range. Significant temporal variations in Os concentrations and isotopic compositions of plant samples are attributed to integrative uptake of airborne Os with non-radiogenic composition. Measured Os concentrations in biological matrices increase in the order: small shrub leaves (blueberry and lingonberry) ≤ spruce needles ≤ mushrooms ≤ tree leaves ≤ pine needles 4 ) in the environment. Though the Os content of samples from Northeast Sweden does not differ significantly from matrix-matched international reference materials (not certified for Os) of abiotic origin, the estimates of gaseous OsO 4 concentrations are roughly an order of magnitude higher than have been reported for particle-bound Os in other studies. The pronounced spatial variations between relatively closely situated sites in mean 187 Os/ 188 Os ratios for samples of the same species (presumably with the same dominating uptake mechanism) point to the presence of different local Os sources. This study therefore demonstrates that emissions of Os from automobile catalytic converters are not the only source of contemporary environmental contamination

  19. The Autumn Ghost : the history of polioepidemics in Sweden

    OpenAIRE

    Axelsson, Per

    2004-01-01

    Polio epidemics appeared in Sweden in 1881 and at the turn of the 20th century the disease became an annual feature in the epidemiological pattern. Due to vaccination starting in 1957 epidemics ceased to exist in Sweden around 1965. This thesis deals with the history polio epidemics in Sweden, 1880-1965 and studies the demographical influence of polio, how the medical authorities investigated and tried to combat it, and the care of those who contracted the disease. A study of polio mortality ...

  20. Studies on the gamma radiation environment in Sweden with special reference to 137Cs

    International Nuclear Information System (INIS)

    Almgren, Sara

    2008-09-01

    Gamma radiation in the environment today mainly originates from naturally occurring radionuclides, but anthropogenic radionuclides, such as 137 Cs, contribute in some areas. In order to assess population exposure in case of fallout from nuclear weapons (NWF) or accidents, knowledge and monitoring of external gamma radiation and radionuclide concentrations in the environment is important. For this purpose 34 sampling sites were established in western Sweden and repeated soil sampling, field gamma spectrometry (in situ measurements), and dose rate measurements were performed. The variations in the activities between the different sampling occasions were found to be quite large. The naturally occurring radionuclides were the main source of outdoor dose rates. The uranium and thorium decay series contributed about equally to the total dose while the contribution from 40 K was somewhat higher. The dose rates were mainly correlated to the ground cover, with higher levels on asphalt and cobble stones than on grass. The large scale deposition densities from NWF and the Chernobyl accident could be relatively well estimated by a model including the amount of precipitation and measured deposition at few reference sites. The deposition density from nuclear weapons tests in Sweden between 1962 and 1966 was found to be 1.42-2.70 kBq/m 2 and the deposition density from Chernobyl in western Sweden ranged between 0.82-2.61 kBq/m 2 . The vertical migration of 137 Cs was studied at the sampling sites in western Sweden and a solution to the convection-diffusion equation (CDE) was fitted to depth profiles. The vertical migration of 137 Cs was found to be very slow and diffusive transport was dominant at most locations. The apparent convection velocity and diffusion coefficient were found to be 0-0.35 cm/year and 0.06-2.63 cm 2 /year, respectively. The average depth of the maximum activity was 5.4±2.2 cm. The fitted depth distributions for each location were used to correct in situ

  1. Have combustible cigarettes met their match? The nicotine delivery profiles and harmful constituent exposures of second-generation and third-generation electronic cigarette users.

    Science.gov (United States)

    Wagener, Theodore L; Floyd, Evan L; Stepanov, Irina; Driskill, Leslie M; Frank, Summer G; Meier, Ellen; Leavens, Eleanor L; Tackett, Alayna P; Molina, Neil; Queimado, Lurdes

    2017-03-01

    Electronic cigarettes' (e-cigarettes) viability as a public health strategy to end smoking will likely be determined by their ability to mimic the pharmacokinetic profile of a cigarette while also exposing users to significantly lower levels of harmful/potentially harmful constituents (HPHCs). The present study examined the nicotine delivery profile of third- (G3) versus second-generation (G2) e-cigarette devices and their users' exposure to nicotine and select HPHCs compared with cigarette smokers. 30 participants (10 smokers, 9 G2 and 11 G3 users) completed baseline questionnaires and provided exhaled carbon monoxide (eCO), saliva and urine samples. Following a 12-hour nicotine abstinence, G2 and G3 users completed a 2-hour vaping session (ie, 5 min, 10-puff bout followed by ad libitum puffing for 115 min). Blood samples, subjective effects, device characteristics and e-liquid consumption were assessed. Smokers, G2 and G3 users had similar baseline levels of cotinine, but smokers had 4 and 7 times higher levels of eCO (pe-cigarette liquids with significantly lower nicotine concentrations. During the vaping session, G3 users achieved significantly higher plasma nicotine concentrations than G2 users following the first 10 puffs (17.5 vs 7.3 ng/mL, respectively) and at 25 and 40 min of ad libitum use. G3 users consumed significantly more e-liquid than G2 users. Vaping urges/withdrawal were reduced following 10 puffs, with no significant differences between device groups. Under normal use conditions, both G2 and G3 devices deliver cigarette-like amounts of nicotine, but G3 devices matched the amount and speed of nicotine delivery of a conventional cigarette. Compared with cigarettes, G2 and G3 e-cigarettes resulted in significantly lower levels of exposure to a potent lung carcinogen and cardiovascular toxicant. These findings have significant implications for understanding the addiction potential of these devices and their viability/suitability as aids to

  2. Application of Thomson scattering at 1.06μm as a diagnostic for spatial profile measurements of electron temperature and density on the TCV tokamak

    International Nuclear Information System (INIS)

    Franke, S.

    1997-04-01

    The variable configuration tokamak, TCV, in operation at CRPP since the end of 1991, is a particularly challenging machine with regard to the experimental system that must provide essential information regarding properties of confined plasmas with strongly shaped, non-circular cross-sections. The importance of the energy confinement issue in a machine designed specifically for the investigation of the effect of plasma shape on confinement and stability is self-evident, as is the necessity for a diagnostic capable of providing the profiles of electron temperature and density required for evaluation of this confinement. For TCV, a comprehensive Thomson Scattering (TS) diagnostic was the natural choice, specifically owing to the resulting spatially localized and time resolved measurement. The details of the system installed on TCV, together with the results obtained from the diagnostic comprise the subject matter of this thesis. A first version of the diagnostic was equipped with only ten observation volumes. In this case, adequate spatial resolution can only be maintained if measurements are limited to plasmas located in the upper half of the highly elongated TCV vacuum vessel. The system has recently been upgraded through the addition of a further fifteen observation volumes, together with major technical improvements in the scattered light detection system. This new version now permits TS observations in all TCV plasma configurations, including equilibria produced in the lower and upper halves of the vacuum vessel and the highly elongated plasmas now routinely created. Whilst a description of the new detection system along with some results obtained using the extended set of observation volumes are included, this thesis reports principally on the hardware details of and the interpretation of data from the original, ten observation volume system. (author) figs., tabs., 75 refs

  3. The U.S. Financial Crisis: Lessons From Sweden

    National Research Council Canada - National Science Library

    Jackson, James K

    2008-01-01

    In the early 1990s, Sweden faced a banking and exchange rate crisis that led it to rescue banks that had experienced large losses on their balance sheets and that threatened a collapse of the banking system...

  4. Nuclear Liability and Insurance for Nuclear Damage in Sweden

    International Nuclear Information System (INIS)

    Thofelt, H.

    1998-01-01

    This paper contains some facts about the Swedish nuclear energy production system and about the nuclear operators liability with the important issues. The nuclear insurance of Sweden is also explained in short terms. (author)

  5. The Adoption of Additive Manufacturing Technology in Sweden

    OpenAIRE

    Kianian, Babak; Tavassoli, Sam; Larsson, Tobias; Diegel, Olaf

    2015-01-01

    This article analyzes the adoption of additive manufacturing (AM) technologies in Sweden. The data set consists of a recent and representative sample of Swedish AM users (companies, universities, and research institutes). The authors investigate two questions. First, what are the current applications of AM in Sweden (e.g., rapid prototyping [RP], production)? Second, what are the factors that can explain the variation in AM adoption among the users? Using a regression analysis technique, the ...

  6. Energy policies of IEA countries: Sweden - 2008 review

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2008-05-15

    Sweden is one of the leading IEA countries in the use of renewable energy and has a long tradition of ambitious and successful policies to improve energy efficiency. Compared to the other IEA countries, Sweden's CO2 emissions per capita and per unit of GDP are low, partly owing to efficient and low-carbon space heating, and virtually carbon-free electricity generation. The country also remains a forerunner in electricity market liberalisation. Still, even if Sweden has continued to make progress in most areas of its energy policy since the IEA last conducted an in-depth review in 2004, there is room for improvement. As Sweden plans to further increase the use of renewable energy, it is crucial that these supplies are produced and used in the most sustainable manner for the environment and the economy as a whole. With regard to CO2 emissions, more can be done in all sectors, but as transport is the largest polluter and its emissions are increasing, it is the logical focus for Sweden's efforts to reduce emissions further. This is a significant challenge. Nuclear provides almost half of the electricity in Sweden, at a low cost and without CO2 emissions. But the future of nuclear power in the national power mix is still uncertain. To provide clear guidance to the electricity sector, Sweden will need to resolve the ambiguity about the future of nuclear power in the country. This review analyses the energy challenges facing Sweden and provides critiques and recommendations for further policy improvements. It is intended to provide input to Swedish energy policy makers to help them identify a path towards a more sustainable energy future.

  7. The health and working conditions of female immigrants in Sweden

    OpenAIRE

    Akhavan, Sharareh

    2006-01-01

    Sweden is one of the European countries that has gradually changed from a mainly ethnically homogeneous society into a multi-ethnic society. This change began in the late 1940s and has increased in pace, especially since the early 1960s. The overall aim of this thesis is to understand, describe and analyze the factors that contribute to poor health among female immigrants in Sweden, from the perspectives of class, gender and ethnicity. This thesis is based on four differ...

  8. Relative Deprivation and Sickness Absence in Sweden

    Directory of Open Access Journals (Sweden)

    Jonas Helgertz

    2013-08-01

    Full Text Available Background: A high prevalence of sickness absence in many countries, at a substantial societal cost, underlines the importance to understand its determining mechanisms. This study focuses on the link between relative deprivation and the probability of sickness absence. Methods: 184,000 men and women in Sweden were followed between 1982 and 2001. The sample consists of working individuals between the ages of 19 and 65. The outcome is defined as experiencing more than 14 days of sickness absence during a year. Based on the complete Swedish population, an individual’s degree of relative deprivation is measured through income compared to individuals of the same age, sex, educational level and type. In accounting for the possibility that sickness absence and socioeconomic status are determined by common factors, discrete-time duration models were estimated, accounting for unobserved heterogeneity through random effects. Results: The results confirm that the failure to account for the dynamics of the individual’s career biases the influence from socioeconomic characteristics. Results consistently suggest a major influence from relative deprivation, with a consistently lower risk of sickness absence among the highly educated. Conclusions: Altering individual’s health behavior through education appears more efficient in reducing the reliance on sickness absence, rather than redistributive policies.

  9. Relative deprivation and sickness absence in Sweden.

    Science.gov (United States)

    Helgertz, Jonas; Hess, Wolfgang; Scott, Kirk

    2013-08-29

    A high prevalence of sickness absence in many countries, at a substantial societal cost, underlines the importance to understand its determining mechanisms. This study focuses on the link between relative deprivation and the probability of sickness absence. 184,000 men and women in Sweden were followed between 1982 and 2001. The sample consists of working individuals between the ages of 19 and 65. The outcome is defined as experiencing more than 14 days of sickness absence during a year. Based on the complete Swedish population, an individual's degree of relative deprivation is measured through income compared to individuals of the same age, sex, educational level and type. In accounting for the possibility that sickness absence and socioeconomic status are determined by common factors, discrete-time duration models were estimated, accounting for unobserved heterogeneity through random effects. The results confirm that the failure to account for the dynamics of the individual's career biases the influence from socioeconomic characteristics. Results consistently suggest a major influence from relative deprivation, with a consistently lower risk of sickness absence among the highly educated. Altering individual's health behavior through education appears more efficient in reducing the reliance on sickness absence, rather than redistributive policies.

  10. Procurement of medical equipment in Sweden

    Directory of Open Access Journals (Sweden)

    Heikki Terio

    2010-02-01

    Full Text Available In many hospitals in Sweden the importance of technology management is already accepted and accepted since the hospital managements have recognised that technology is an integral part of all major policy and planning decisions. Today’s medical devices are technically complex and sometimes a system of interacting devices is required to achieve the desired clinical function. If the hospitals want to use the latest, modern technology, then they need to make substantial investments in both equipment and competence. Complex technology, large investments and need of highly qualii ed personnel to handle the medical devices are factors that indicate a need of well-dei ned procurement process as an essential part of the total health technology management system that should be used in a hospital. In such a procurement process, carefully prepared planning of technology investments can reduce the running costs and costs for maintenance substantially. In addition, a well-dei ned procurement process contributes to increase the patient safety. In Karolinska University Hospital goods and services are purchased for more than 20% of the hospital’s €1.2 billion turnover. It is therefore very important that the procurement is carried out ef ectively.

  11. Trends in nuclear power costs in Sweden

    International Nuclear Information System (INIS)

    Vesterhaugh, O.; Blomsnes, B.

    1979-01-01

    At the request of the Swedish Ministry of Industry, a study of the costs of nuclear power in Sweden was performed early this year. The main purpose of the study was to determine the real and projected costs of electricity produced by nuclear stations. The basis for the calculations of the study was the currently planned Swedish nuclear power programme consisting of 11 reactors of which six are operating, two waiting for start-up permission and the remainder are under construction. All cost components, relevant to the commercial programme were covered, with particular emphasis on future costs for handling of spent fuel, waste disposal and plant decommissioning. A capital depreciation time of 25 years and a 4 per cent effective annual interest rate (ie interest after correction for inflation) were assumed in the calculations given in December 1978 currency. The main result of the study is the average cost per kWh for the reactors. The results are in close agreement with the cost estimate given by the Swedish Energy Commission and now that the nuclear plants produce electricity considerably cheaper than other plants with the exception of some hydroelectric ones. (author)

  12. Projects on filter testing in Sweden

    International Nuclear Information System (INIS)

    Normann, B.; Wiktorsson, C.

    1985-01-01

    The Swedish nuclear power program comprises twelve light water reactors. Nine are boiling water reactors of ASEA-ATOM design and three are pressurized water reactors of Westinghouse design. Of these, ten are in operation and two are under construction and planned to go into operation during late 1984 and early 1985, respectively. Frequent tests on the penetration of particles through HEPA filters, regular tests on the adsorption of methyl iodide in the stand-by carbon filter units by laboratory testing are discussed. The proposed new regulations are based on many years of experience of filter system operation and of tests in-situ and in the laboratory. Moisture and water are factors that affect the functioning of filters. In addition, high loading of dust can give rise to increased penetration through HEPA filters, however pinholes could have less influence on the total penetration. Laboratory tests show that DOP particles retain 30-40% in 90 mm carbon filters (8-12 mesh). However no effect on the ability of carbon to adsorb methyl iodide after DOP contamination in combined carbon/HEPA filters has been observed. Leakage from ventilation ducts can cause radioactive contamination problems during filter testing with radioiodine. In-situ testing of control-room filters has been performed using inactive methyl iodide. A type of carbon bed not previously used in Sweden has been introduced. Testing of this filter type is discussed

  13. Reindeer pastoralism in Sweden 1550-1950

    Directory of Open Access Journals (Sweden)

    Lennart Lundmark

    2007-04-01

    Full Text Available In the middle of the 16th century we get the first opportunity to a more detailed knowledge of reindeerpastoralism in Sweden. At that time the Sami lived in a hunter-gatherer economy. A family had in average about 10-20 domesticated reindeer, mainly used for transport. They could also be milked and used as decoys when hunting wild reindeer. During late 16th century the Swedish state and merchants bought large amounts of fur from the Sami. The common payment was butter and flour. This created a new prosperity, which lead to a considerable increase in population in Swedish Lapland. The population became too large for a hunter-gatherer economy. A crisis in early 17th century was the starting point for the transition to a large-scale nomadic reindeer pastoralism. Up to the middle of the 18th century intensive reindeer pastoralism was successful. But the pastoralism became gradually too intensive and diseases started to spread when the herds were kept too densely crowded for milking in summertime. During the first decades of the 19th century reindeer pastoralism in Sweden went through a major crisis. The number of reindeer herding mountain-Sami decreased considerably, mainly because they went to live permanently along the Norwegian coastline. Intensive reindeer pastoralism started to give way for extensive herding towards the end of the 19th century. In the north of Sweden influences from the Kautokeino Sami were an important factor, in the south extensive reindeer herding started to expand when the market for meat came closer to the Sami. During the 1920s the milking of reindeer ceased in Sweden, except in a few families. At that time Sami families from the north had been removed southwards. They further demonstrated the superiority of extensive herding to the Sami in mid- and southern Lapland. Reindeer pastoralism is basically a system of interaction between man and animal, but it has been heavily influenced by market forces and state intervention

  14. Occupational balance in health professionals in Sweden.

    Science.gov (United States)

    Wagman, Petra; Lindmark, Ulrika; Rolander, Bo; Wåhlin, Charlotte; Håkansson, Carita

    2017-01-01

    Health care employees are often women, a group that has high degrees of sick leave and perhaps problems attaining occupational balance. However, people think differently about their everyday activities and it is therefore important to take their perceptions into account but occupational balance has not yet been measured in health professionals. The aim was to describe occupational balance in three different samples of health professionals in Sweden. A further aim was to investigate whether occupational therapists (OTs) rate their occupational balance differently from other health professionals. Four hundred and eighty-two health professionals, employees in public dentistry, mental health care and OTs, aged 21-70 years participated. The participants' occupational balance was measured using the occupational balance questionnaire (OBQ). The ratings of occupational balance were similar to earlier studies and did not differ significantly between the samples. The OTs' occupational balance was also similar to that of the other health professionals. The similarities in occupational balance indicate the same difficulties in attaining it. The result highlights the possibility that working people face similar difficulties in achieving occupational balance. Further research is warranted about how to attain it.

  15. IAEA Team Concludes Peer Review of Sweden's Nuclear Regulatory Framework, 17 February 2012, Stockholm, Sweden

    International Nuclear Information System (INIS)

    2012-01-01

    Full text: An international team of senior nuclear safety and radiation protection experts today concluded a 12-day mission to review the regulatory framework for nuclear and radiation safety in Sweden. The Integrated Regulatory Review Service (IRRS) mission, which was conducted at the request of Sweden, noted good practices in the country's nuclear regulatory system and also made recommendations and suggestions for the Swedish Radiation Safety Authority (SSM) and the government. These are aimed at strengthening the effectiveness of the country's regulatory framework and functions in line with IAEA Safety Standards. ''Throughout the mission, the IRRS team received full cooperation from SSM staff in its review of Sweden's regulatory, technical and policy issues,'' said Georg Schwarz, mission leader and Deputy Director General of the Swiss nuclear regulator (ENSI). 'The staff were open and candid in their discussions and provided the fullest practicable assistance', he commented. The main observations of the IRRS Review team included the following: SSM operates as an independent regulator in an open and transparent manner with well-organized regulatory processes; SSM is receptive to feedback and strives to maintain a culture of continuous learning; and Following the TEPCO Fukushima Daiichi accident, SSM responded promptly to public demand for information and communicated effectively with the national government, the public and other interested parties. Good practices identified by the IRRS team included, though they are not limited to, the following: The consolidation of the two previous national regulatory authorities into SSM was successful; Overall, SSM's management system is comprehensive and contributes to staff efficiency and effectiveness; The nuclear power plant refurbishment programme as required by SSM enhanced safety; and Sweden's regulatory framework for high-level waste disposal is comprehensive and technically sound. The IRRS Review team identified

  16. Sweden in the Delaware Valley: Everyday Life and Material Culture in New Sweden

    DEFF Research Database (Denmark)

    Naum, Magdalena; Ekengren, Fredrik; Zagal Mach Wolfe, Ulla Isabel

    2013-01-01

    In 1637 the Swedish Crown, encouraged by Dutch merchants, developed a plan to establish a colonial outpost in America to tap into profitable tobacco and beaver pelt trade. The same year the first cargo ships left Sweden and sailed westwards to claim their piece of America along the Delaware River......, their perception and interactions with the neighbouring Native American groups. It discusses the ways material culture was used, exchanged and appropriated by the colonists and the local Lenape and Susquehannock in the processes of meeting, negotiations and daily coexistence....

  17. {sup 137}Cs in a raised bog in central Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Rosen, K. [Department of Soil and Environment, Swedish University of Agricultural Sciences, SLU, Ulls vag 17, Box 7014, SE-75007, Uppsala (Sweden)], E-mail: klas.rosen@mv.slu.se; Vinichuk, M. [Department of Soil and Environment, Swedish University of Agricultural Sciences, SLU, Ulls vag 17, Box 7014, SE-75007, Uppsala (Sweden); Department of Ecology, Zhytomyr State Technological University, 103 Cherniakhovsky Str., 10005 Zhytomyr (Ukraine); Johanson, K.J. [Department of Soil and Environment, Swedish University of Agricultural Sciences, SLU, Ulls vag 17, Box 7014, SE-75007, Uppsala (Sweden)

    2009-07-15

    The vertical distribution of {sup 137}Cs activity in peat soil profiles and {sup 137}Cs activity concentration in plants of various species was studied in samples collected at two sites on a raised bog in central Sweden. One site (open bog) was in an area with no trees and only a few sparsely growing plant species, while the other (low pine) was less than 100 m from the open bog site and had slowly growing Scots pine, a field layer dominated by some ericaceous plants and ground well-covered by plants. The plant samples were collected in 2004-2007 and were compared with samples collected in 1989 from the same open bog and low pine sites. Ground deposition of {sup 137}Cs in 2005 was similar at both sites, 23 000 Bq m{sup -2}. In the open bog peat profile it seems to be an upward transport of caesium since a clear peak of {sup 137}Cs activity was found in the uppermost 1-4 cm of Sphagnum layers, whereas at the low pine site {sup 137}Cs was mainly found in deeper (10-12 cm) layers. The migration rate was 0.57 cm yr{sup -1} at the open bog site and the migration centre of {sup 137}Cs was at a depth of 10.7, while the rate at the low pine site was 0.78 cm yr{sup -1} and the migration centre was at 14.9 cm. Heather (Calluna vulgaris) was the plant species with the highest {sup 137}Cs activity concentrations at both sites, 43.5 k Bq{sup -1} DM in 1989 decreasing to 20.4 in 2004-2007 on open bog and 22.3 k Bq kg{sup -1} DM in 1989 decreasing to 11.2 k Bq{sup -1} DM by the period 2004-2007 on the low pine site. {sup 137}Cs transfer factors in plants varied between 0.88 and 1.35 on the open bog and between 0.48 and 0.69 m{sup 2} kg{sup -1} DM at the low pine site.

  18. 137Cs in a raised bog in central Sweden

    International Nuclear Information System (INIS)

    Rosen, K.; Vinichuk, M.; Johanson, K.J.

    2009-01-01

    The vertical distribution of 137 Cs activity in peat soil profiles and 137 Cs activity concentration in plants of various species was studied in samples collected at two sites on a raised bog in central Sweden. One site (open bog) was in an area with no trees and only a few sparsely growing plant species, while the other (low pine) was less than 100 m from the open bog site and had slowly growing Scots pine, a field layer dominated by some ericaceous plants and ground well-covered by plants. The plant samples were collected in 2004-2007 and were compared with samples collected in 1989 from the same open bog and low pine sites. Ground deposition of 137 Cs in 2005 was similar at both sites, 23 000 Bq m -2 . In the open bog peat profile it seems to be an upward transport of caesium since a clear peak of 137 Cs activity was found in the uppermost 1-4 cm of Sphagnum layers, whereas at the low pine site 137 Cs was mainly found in deeper (10-12 cm) layers. The migration rate was 0.57 cm yr -1 at the open bog site and the migration centre of 137 Cs was at a depth of 10.7, while the rate at the low pine site was 0.78 cm yr -1 and the migration centre was at 14.9 cm. Heather (Calluna vulgaris) was the plant species with the highest 137 Cs activity concentrations at both sites, 43.5 k Bq -1 DM in 1989 decreasing to 20.4 in 2004-2007 on open bog and 22.3 k Bq kg -1 DM in 1989 decreasing to 11.2 k Bq -1 DM by the period 2004-2007 on the low pine site. 137 Cs transfer factors in plants varied between 0.88 and 1.35 on the open bog and between 0.48 and 0.69 m 2 kg -1 DM at the low pine site.

  19. ‘Looking like my favourite Barbie’ – Online Gender Construction of Tween Girls in Estonia and in Sweden

    Directory of Open Access Journals (Sweden)

    Andra Siibak

    2011-10-01

    Full Text Available The aim of this article is to analyse how tween girls in Estonia and in Sweden describe and discover their gender identities when selecting profile images for social networking sites (SNSs. To this end, interviews with tweens in Estonia (N=21 and in Sweden (N=31 were carried out. As SNSs largely exist without the recognisable surveillance of adults, children can explore the social matrix of relating to others, and they also feel safe to try out and display different constructions and reconstructions of their identity. At the same time, in communicating online, impression management is formulated with constant worry about how to construct one’s virtual identity so that it will be appreciated and accepted by one’s peer group. In this article, our analysis focuses on the most popular posing strategies used by tween girls, which, it turns out, are often marked by reproduction of the dominant heterosexual cultural norms and values.

  20. Income distribution and mortality in Sweden

    Directory of Open Access Journals (Sweden)

    Christina Lindholm

    2008-12-01

    Full Text Available

    Background: The hypothesis that a high income inequality on a societal level is associated with poor health outcomes has been both rejected and accepted in empirical studies. Whether the influence of economic circumstances on health operates at the individual level or societal level has important implications on policy and intervention alternatives. The objective of this study was to analyse the relationship between income inequality and mortality in Swedish municipalities and if the relationship varies depending on the mean income or on the time-lag between income inequality and mortality.

    Methods: The study was based on register data on mean income and income inequality (Gini coefficients from Statistics Sweden 1982 and 1998, aggregated on the municipality level. Data on age-standardised death rates per 100,000 persons were obtained for 1983, 1988, 1993, 1998 and 2002. The analysis on 1998 was a test of the robustness of the results.

    Results: The relationship between high income inequality in 1982 and mortality in 1983 was negative with a similar relationship in 1998. Using latency periods, the results show a decreasing trend of mortality in relation to higher Gini coefficients. A positive relationship between Gini and mean income implies that municipalities with larger income distribution also had a higher mean income and vice versa.

    Conclusions: High income inequality does not have a negative effect on mortality in Swedish municipalities. The municipalities with high income inequality have also high mean income as opposed to many other countries. The income level seems to be more substantial for mortality than the income inequality.

  1. Neotectonics in northern Sweden - geological investigations

    International Nuclear Information System (INIS)

    Lagerbaeck, R.; Witschard, F.

    1983-05-01

    Fairly large areas around the formerly known quaternary faults have been air photo interpreted. The fault known as the Parvie fault has been found to extend somewhat further towards the south, thereby crossing the valley of the Stora Lule river. Furthermore, another fault has been discovered in the Lansjaerv region, and thus the faults in this area form a better fit to the regional pattern, with a SSW - NNE trend and a relative uplift of the eastern part. The fault scarps have been leveled photogrammatrically, and reproduced on maps on the scales of 1:50000 and 1:100000, and on overview maps on the scale of 1:250000. The highest leveld scarps somewhat exceed 30 m. The total length of the faults is roughly 300 km. During the air photo interpretation, several landslides have been detected, and it seems evident from their location that there is a causal connection between faults and landslides. It seems evident that the different faults are not simultaneously formed, but created at separate events. Representative samples have been collected, and thin sections of these investigated under the microscope. Often, the bedrock shows signs of older tectonic influence, and it seems that the faults largerly have been released along existing zones of weakness in the bedrock. However, striking exceptions, with fracturing through unaltered rock, have been found in several places. The faults illustrated in the maps below undoubtedly represent the most important signs of late quaternary fault activity in Norrbotten east of the Caledonian mountains. The geographic, and very probably also causal connection between faults and landslides seems obvious in both Finland and Sweden. We need a satisfactory tectonic explanation for the faults. Undoubtedly, the glacial - isostatic forces have a central role. The strike of the faults is approximately perpendicular to the direction of plate motion, and compressive forces have acted at the formation of the faults. (author)

  2. A review of the seismotectonics of Sweden

    International Nuclear Information System (INIS)

    Muir Wood, R.

    1993-04-01

    A study has been undertaken of data relating to the seismotectonic state of Sweden, both under current conditions and also through the glaciation/deglaciation cycle. The focus of the study has been to explore primary data on all the separate sources of information bearing on seismotectonics including: a. regional tectonics, b. neotectonic surface faulting, c. geodetic and tide-gauge observations of land-level changes, d. the horizontal strain field, e. Holocene land-level changes, f. historical and instrumental seismicity, g. palaeosesmicity, h. stress determinations, and i. geothermal observations. These data have then been combined into a regional seismotectonic model, relating the distribution, style and rates of seismicity to the seismogenic properties of the crust and the continuing crustal deformation. From the evidence of the modelled and observed horizontal strain field and the diversity of focal mechanisms, all the current seismicity of the region appear to be a response to postglacial rebound. Through and understanding of the interaction between the pre-existing tectonic strain field, and the strain field resulting from glacial loading and unloading it is possible to make testable predictions about the localisation of deformation and seismicity in Fennoscandia at different stages of the glacial cycle. Immediately following glacial unloading intense deformation was concentrated on the northwestern flank of the down warped crustal bowl. Currently low-level deformation and associated seismicity is most pronounced around the western margins of the dome of postglacial rebound. While the rebound dome is primarily extensional relieving the high levels of compression that accompanied crustal down warping, there are also areas of compression and extension associated with flexures in the rebound surface that appear to affect the distribution and style of seismicity. The study shows how the significance and localisation of deformation and seismicity may be predicted

  3. Thermomechanical studies in granite at Stripa, Sweden

    International Nuclear Information System (INIS)

    Cook, N.G.W.; Myer, L.R.

    1981-01-01

    Media other than rock salt are being considered for the deep, geologic disposal of nuclear wastes. The disposal of high-level nuclear waste in a deep, underground repository will subject the rock to a thermal pulse that will induce displacements, strains, and stresses in the rock. Thermomechanical experiments, with electrical heaters simulating the thermal output of waste canisters, were carried out in granite at a depth of 340 m below surface adjacent to a defunct iron ore mine at Stripa, Sweden. Changes in temperature, displacement, and stress in the rock around these heaters were measured, and the measurements were compared with predictions calculated from the theory of linear thermoelasticity. Measured temperature changes agreed well with predictions, but measured displacements and stresses were consistently less than those predicted with constant values for the coefficient of thermal expansion and elastic properties of the rock. A laboratory test program to measure these coefficients over ranges of stress and temperature representing those in the field experiment has been initiated. Test specimens were taken from cores recovered from the instrumentation holes in the Stripa experiments. Preliminary results from laboratory tests on specimens free of joints indicate that the values of Young's modulus and Poisson's ratio increase from about 60 to 80 MPa and from 0.15 to 0.22, respectively, as the confining stress is increased from 2 to 55 MPa; these values decrease with increasing temperature, more so at 2 MPa than at 55 MPa. The linear coefficient of thermal expansion at a confining stress of 30 MPa increases from about 10 x 10 - 6 / 0 C at 40 0 C to about 14 x 10 - 6 / 0 C. The magnitudes of these changes are not sufficient to resolve the disparity between measured and predicted results. Perhaps the properties of test specimens containing joints will show greater variations in the values of the thermomechanical coefficients with temperature and pressure

  4. Gambling in Sweden: the cultural and socio-political context.

    Science.gov (United States)

    Binde, Per

    2014-02-01

    To provide an overview, with respect to Sweden, of the cultural history of gambling, the commercialization of gambling, problem gambling research, the prevalence of problem gambling and its prevention and treatment. A review of the literature and official documents relating to gambling in Sweden; involvement in gambling research and regulation. Gambling has long been part of Swedish culture. Since about 1980 the gambling market, although still largely monopolistic, has been commercialized. At the same time, problem gambling has emerged as a concept in the public health paradigm. Debate regarding whether or not Sweden's national restrictions on the gambling market are compliant with European Community legislation has helped to put problem gambling on the political agenda. Despite expanded gambling services, the extent of problem gambling on the population level has not changed significantly over the past decade. The stability of problem gambling in Sweden at the population level suggests a homeostatic system involving the gambling market, regulation, prevention and treatment and adaption to risk and harm by gamblers. We have relatively good knowledge of the extent and characteristics of problem gambling in Sweden and of how to treat it, but little is known of how to prevent it effectively. Knowledge is needed of the effectiveness of regulatory actions and approaches, and of responsible gambling measures implemented by gambling companies. © 2013 The Author, Addiction © 2013 Society for the Study of Addiction.

  5. A database on electric vehicle use in Sweden. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Fridstrand, Niklas [Lund Univ. (Sweden). Dept. of Industrial Electrical Engineering and Automation

    2000-05-01

    The Department of Industrial Electrical Engineering and Automation (IEA) at the Lund Institute of Technology (LTH), has taken responsibility for developing and maintaining a database on electric and hybrid road vehicles in Sweden. The Swedish Transport and Communications Research Board, (KFB) initiated the development of this database. Information is collected from three major cities in Sweden: Malmoe, Gothenburg and Stockholm, as well as smaller cities such as Skellefteaa and Haernoesand in northern Sweden. This final report summarises the experience gained during the development and maintenance of the database from February 1996 to December 1999. Our aim was to construct a well-functioning database for the evaluation of electric and hybrid road vehicles in Sweden. The database contains detailed information on several years' use of electric vehicles (EVs) in Sweden (for example, 220 million driving records). Two data acquisition systems were used, one less and one more complex with respect to the number of quantities logged. Unfortunately, data collection was not complete, due to malfunctioning of the more complex system, and due to human factors for the less complex system.

  6. Electronic School.

    Science.gov (United States)

    Executive Educator, 1994

    1994-01-01

    This issue of "The Electronic School" features a special forum on computer networking. Articles specifically focus on network operating systems, cabling requirements, and network architecture. Tom Wall argues that virtual reality is not yet ready for classroom use. B.J. Novitsky profiles two high schools experimenting with CD-ROM…

  7. Energy in Sweden. Facts and figures 2007; Energilaeget 2007

    Energy Technology Data Exchange (ETDEWEB)

    2007-12-15

    Energy in Sweden 2007: Facts and Figures contains the tabular for most of the diagrams in the main publication. These data consist primarily of the results of the Agency's processing of basic data from Statistics Sweden. 2001 statistics for the period 1983-1999 where revised compared to data for previous editions. With effect from the 2001 edition, statistics are of preliminary character for the two last published years (2005 and 2006). Breakdowns into certain types of fuels vary somewhat depending on whether preliminary or final data is used. Further information about the statistics can be found in Energy in Sweden, chapter 8 Energy Facts. Please note that the figures have been rounded up or down, therefore totals do not always comply with the sum of individual figures

  8. Vocational Education and Industrial Relations: Sweden 1910–1975

    Directory of Open Access Journals (Sweden)

    Tobias Karlsson

    2018-02-01

    Full Text Available In this article we discuss vocational education in Sweden against the backdrop of the changing nature of industrial relations in the period from ca 1910 to 1975. Drawing upon evidence from official inquiries and case studies of two industries (forest industry and shipbuilding, we show that Sweden in the 1940s and 1950s can be described as a collective skill formation system in the making, where firms, intermediary associations, and the state cooperated around vocational education and training. However, Sweden developed in a very different direction than similar countries. We argue that this remarkable change of trajectory cannot be understood without considering the simultaneous disintegration of the model of industrial relations, along with general changes in the system of education.

  9. Public and political attitudes to nuclear power in Sweden

    International Nuclear Information System (INIS)

    Wikdahl, C.-E.; Swedish Atomic Forum)

    1988-01-01

    The first important decisions about a large nuclear programme in Sweden were taken in the early 1960s without any political opposition at all. The first signs of an anti-nuclear movement were seen in 1972, and at the general election in 1976 nuclear power was for the first time the main political issue. It remained so until 1980, when Parliament, after a referendum, decided to phase out nuclear power not later than the year 2010. After that decision, political interest in nuclear power evaporated, but returned again after the Chernobyl accident in April 1986. Both the decision in Parliament in 1980 and the Government's bill of May 1987 put Sweden in an unique position. Public attitudes and the political situation in Sweden are examined. (author)

  10. Quality of renewable energy utilization in transport in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Lampinen, Ari

    2015-04-01

    Renewable energy utilization in transportation (RES-T) is a long way behind its utilization in power (RES-E) and heat (RES-H) sectors. International and national environmental policies have recently given a lot of emphasis on this problem. For that reason information is sought on how to implement solutions both politically and technologically. As Sweden is a global leader in this area, it can provide valuable examples. In 2012 Sweden became the first country to reach the binding requirement of the European Union for at least 10 % share for renewable energy in transport energy consumption. But qualitative development has been even stronger than quantitative. Among the success stories behind qualitative progress, most noteworthy are those created by innovative municipal policies. By 2030 Sweden aims to achieve fossil fuel independent road transport system and by 2050 completely carbon neutral transport system in all modes of transport.

  11. An electric-drive vehicle strategy for Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Sperling, D.; Lipman, T. [California Univ., Davis, CA (United States). Inst. of Transportation Studies; Lundberg, M. [Swedish Transport and Communications Research Board, Stockholm (Sweden)

    2000-07-01

    The strategy that Sweden has taken regarding the use of electric-powered vehicles (EVs) to mitigate the environmental impacts caused by the transportation sector was discussed. Sweden's unique attributes include inexpensive and clean electricity, a strong environmental ethic and a strong automotive sector. All versions of electric-drive technology are considered to be environmentally superior to internal combustion engine vehicles. While the cost of batteries is dropping, they will remain highly priced. However, manufacturers are making larger investments into hybrid EVs and fuel cell EVs. Electric drive buses are also gaining in popularity as a means by which to reduce exhaust gases in urban areas. Sweden's industrial policy is aimed at manufacturing electrically driven heavy duty vehicles such as buses and trucks. The environmental policy is aimed at deploying small EVs for on and off-road transportation use, as well as heavy duty EVs targeted by the industrial policy. refs.

  12. Air Pollution Mortality in Denmark, Finland, and Sweden

    Directory of Open Access Journals (Sweden)

    Ulla Lehmijoki

    2009-01-01

    Full Text Available The adverse health consequences of air pollution are of concern currently and there is a fear that these consequences escalate along with economic growth. The effect of economic growth on air pollution deaths is analyzed in Denmark, Finland, and Sweden by applying the Environmental Kuznets Curve approach, according to which economic growth has competing effects on air pollution and related deaths. On the one hand, emissions tend to increase as the scale of economic activity increases, but on the other hand, consumers and firms in richer countries use cleaner goods and adopt cleaner technologies. In Denmark and Finland, the latter effects are stronger, while in Sweden the opposite is true. Therefore, air pollution deaths will decrease in Denmark and Finland but increase in Sweden. Since country's own emissions do not determine air pollution completely, the paper briefly analyzes emissions from the Baltic countries and Russia.

  13. Sweden's Leadership in a Climate Constrained World. An analysis for Sweden of the Greenhouse Development Rights framework

    Energy Technology Data Exchange (ETDEWEB)

    Kartha, Sivan; Baer, Paul; Athanasiou, Tom; Kemp-Benedict, Eric

    2008-10-15

    This report presents an analysis of the Greenhouse Development Rights framework applied to the case of Sweden. Its objective is to provide useful quantitative guidance on Sweden's role as a leader in our climate constrained world. It presents guidance that is rigorous from the standpoint of climate science and framed in the context of a right to development for the world's poor. This analysis fully accounts for Sweden's true responsibility, by looking beyond territorial emissions alone, and reckoning emissions in terms of Sweden's net 'carbon footprint.' Accounting for carbon embedded in imports, exports and international transport reveals that Sweden's responsibility is 17% larger than would be inferred by considering Sweden's territorial emissions alone. Sweden will naturally have significant obligations under any burden-sharing regime that is based on capacity and responsibility, and only more so under a regime that honors a right to development. Under the GDR framework, our indicative quantification suggests that Sweden's share of responsibility and capacity, and hence its obligation under a politically viable climate regime, will be approximately 0.51% of the global total in 2010. This can be compared to the US's 33%, the EU's 26%, Japan's 7.8%, China's 5.5%, and India's 0.5%. Sweden's 0.51% share of the global total is thus not large in absolute terms, though it is rather large relative to Sweden's small size (0.14% of the global population). These national shares shift over time, as countries' relative proportion of income and emissions change. In light of the emergence of rapidly growing developing country economies, Sweden's share of the global total obligation is projected to decline to 0.43% by 2020, and to 0.35% by 2030. This quantification of Sweden's obligation is useful in two complementary ways. First, if the total global costs of an emergency climate

  14. Potentially avoidable perinatal deaths in Denmark and Sweden 1991

    DEFF Research Database (Denmark)

    Langhoff-Roos, J; Borch-Christensen, H; Larsen, S

    1996-01-01

    to some extent could reflect differences in the quality of care, indicated by the numbers of perinatal deaths in categories of potentially avoidable deaths. MATERIAL AND METHODS: Medical records of 97% of all perinatal deaths in 1991 in the two countries were analyzed. A new classification focusing......BACKGROUND: Since 1950 the perinatal mortality has been significantly higher in Denmark than in Sweden. In 1991 the rate in Denmark was 8.0/1000 deliveries compared to 6.5/1000 in Sweden. An international audit was designed to investigate whether the perinatal death rates in the two countries...

  15. Occurrence of the hermit beetle (Osmoderma eremita), in Sweden.

    OpenAIRE

    Antonsson, Kjell; Hedin, Jonas; Jansson, Niklas; Nilsson, Sven; Ranius, Thomas

    2003-01-01

    We have compiled data on the occurrence of a threatened beetle, Osmoderma eremita, in Sweden. The species inhabits tree hollows with wood mould. The data were compiled from field surveys conducted in 1993-2003, using pitfall traps at 401 localities and using wood mould sampling at 104 localities. We have also gone through published data and all larger Swedish museums and registered old records. O. eremita was recorded at about 30% of the field surveys. In Sweden, oak is by far the most import...

  16. The bedrock and the soil types in the Finnsjoearea, Sweden

    International Nuclear Information System (INIS)

    Almen, K.-E.; Ekman, L.; Olkiewicz, A.

    1978-11-01

    This report is a part of a long-term project, started at the request of the Nuclear Fuel Safety Project, Sweden. The aim of the project is to claryfy the geohydrological situation of a drainage area close to Finnsjoen in northern Uppland, Sweden. The work comprised bedrock- and soil mapping as well as an investigation of existing literature about the geology of northern Uppland. The area is about 25 km 2 and is limited by its water-shed. The area is relatively flat, rich in outcrops - expecially in the western parts - and often swampy. Big areas of forests and agriculture have been drained by ditches. (author)

  17. Diet and Predatory Behavior of Lynx in Sweden

    DEFF Research Database (Denmark)

    Moshøj, Charlotte Margaret

    2002-01-01

    and hunters who fear predation on livestock and reindeer as well as a general reduction in wild game abundance, especially roe deer (Capreolus capreolus). Prey spectrum and predation of lynx was studied based on stomach analyses of lynx throughout Sweden and on data from a field study in south-central Sweden...... (reindeer and roe deer) comprised the greatest part of the diet, while a regional division indicated that while lynxes from northern regions had a narrower diet niche, they were in better condition than lynxes from south of the reindeer husbandry districts. Lynx gender and status also influenced diet...

  18. Potentially avoidable perinatal deaths in Denmark and Sweden 1991

    DEFF Research Database (Denmark)

    Langhoff-Roos, J; Borch-Christensen, H; Larsen, S

    1996-01-01

    BACKGROUND: Since 1950 the perinatal mortality has been significantly higher in Denmark than in Sweden. In 1991 the rate in Denmark was 8.0/1000 deliveries compared to 6.5/1000 in Sweden. An international audit was designed to investigate whether the perinatal death rates in the two countries...... to some extent could reflect differences in the quality of care, indicated by the numbers of perinatal deaths in categories of potentially avoidable deaths. MATERIAL AND METHODS: Medical records of 97% of all perinatal deaths in 1991 in the two countries were analyzed. A new classification focusing...

  19. Sustainable Development in Sweden - a success story. Discourse analysis

    International Nuclear Information System (INIS)

    Ahlberg, Malin

    2009-01-01

    In Sweden the term 'Sustainable Development' is very well known and is often used as leitmotivs in many parts of the society. Since the UN Conference on Environment and Development took place in Rio de Janeiro 1992 SD has become more and more indispensable in political debates and it has even become a crucial argument in management decisions in the business sector. Due to the tradition of consensus policy and the strong involvement of different interest group in policy decision-making processes, the idea of SD as a holistic policy concept fell in Sweden on a fruitful ground

  20. Parental leave and the glass ceiling in Sweden

    OpenAIRE

    Albrecht, James; Skogman Thoursie, Peter; Vroman, Susan

    2015-01-01

    In this paper, we update and extend "Is There a Glass Ceiling in Sweden?" (Albrecht et al. 2003) by documenting the extent to which the gender log wage gap across the distribution in Sweden has changed over the period 1998-2008. We then examine the Swedish glass ceiling in 2008 in more detail by documenting how it differs for white-collar versus blue-collar workers and for private- versus public-sector workers. We also examine when in the life cycle the glass ceiling effect arises and how thi...

  1. Energy in Sweden: Facts and figures 2009; Energilaeget 2009

    Energy Technology Data Exchange (ETDEWEB)

    2009-12-15

    Energy in Sweden 2009: Facts and figures contains the tabular for most of the diagrams in the main publication (STEM-ET--2009-30). These data consist primarily of the results of the Agency's processing of basic data from Statistics Sweden. Statistics are of preliminary character for the two last published years (2007 and 2008). Breakdowns into certain types of fuels vary somewhat depending on whether preliminary or final data is used. Please note that the figures have been rounded up or down, therefore totals do not always comply with the sum of individual figures

  2. A multi-instrument non-parametric reconstruction of the electron pressure profile in the galaxy cluster CLJ1226.9+3332

    Science.gov (United States)

    Romero, C.; McWilliam, M.; Macías-Pérez, J.-F.; Adam, R.; Ade, P.; André, P.; Aussel, H.; Beelen, A.; Benoît, A.; Bideaud, A.; Billot, N.; Bourrion, O.; Calvo, M.; Catalano, A.; Coiffard, G.; Comis, B.; de Petris, M.; Désert, F.-X.; Doyle, S.; Goupy, J.; Kramer, C.; Lagache, G.; Leclercq, S.; Lestrade, J.-F.; Mauskopf, P.; Mayet, F.; Monfardini, A.; Pascale, E.; Perotto, L.; Pisano, G.; Ponthieu, N.; Revéret, V.; Ritacco, A.; Roussel, H.; Ruppin, F.; Schuster, K.; Sievers, A.; Triqueneaux, S.; Tucker, C.; Zylka, R.

    2018-04-01

    Context. In the past decade, sensitive, resolved Sunyaev-Zel'dovich (SZ) studies of galaxy clusters have become common. Whereas many previous SZ studies have parameterized the pressure profiles of galaxy clusters, non-parametric reconstructions will provide insights into the thermodynamic state of the intracluster medium. Aim. We seek to recover the non-parametric pressure profiles of the high redshift (z = 0.89) galaxy cluster CLJ 1226.9+3332 as inferred from SZ data from the MUSTANG, NIKA, Bolocam, and Planck instruments, which all probe different angular scales. Methods: Our non-parametric algorithm makes use of logarithmic interpolation, which under the assumption of ellipsoidal symmetry is analytically integrable. For MUSTANG, NIKA, and Bolocam we derive a non-parametric pressure profile independently and find good agreement among the instruments. In particular, we find that the non-parametric profiles are consistent with a fitted generalized Navaro-Frenk-White (gNFW) profile. Given the ability of Planck to constrain the total signal, we include a prior on the integrated Compton Y parameter as determined by Planck. Results: For a given instrument, constraints on the pressure profile diminish rapidly beyond the field of view. The overlap in spatial scales probed by these four datasets is therefore critical in checking for consistency between instruments. By using multiple instruments, our analysis of CLJ 1226.9+3332 covers a large radial range, from the central regions to the cluster outskirts: 0.05 R500 generation of SZ instruments such as NIKA2 and MUSTANG2.

  3. A superconducting electron spectrometer

    International Nuclear Information System (INIS)

    Guttormsen, M.; Huebel, H.; Grumbkow, A. von

    1983-03-01

    The set-up and tests of an electron spectrometer for in-beam conversion electron measurements are described. A superconducting solenoid is used to transport the electrons from the target to cooled Si(Li) detectors. The solenoid is designed to produce either a homogeneous axially symmetric field of up to 2 Tesla or a variety of field profiles by powering the inner and outer set of coils of the solenoid separately. The electron trajectories resulting for various field profiles are discussed. In-beam electron spectra taken in coincidence with electrons, gammas and alpha-particles are shown. (Auth.)

  4. Beam facilities and new projects in Sweden

    International Nuclear Information System (INIS)

    Kullander, S.

    1992-01-01

    An electron storage ring in Lund and ion storage rings in Stockholm and Uppsala built during the 1980s are now in use mostly for basic research. Particle Induced X-ray Emission (PIXE) and Plasma Desorption Mass Spectroscopy (PDMS) developed and refined at Swedish van de Graaff accelerators are now standard methods. Positron Emission Tomography (PET) was developed in Stockholm and Uppsala where a new center was recently inaugurated. (author)

  5. Sweden-Norway at the Berlin Conference 1884-85 : History, national identity-making and Sweden's relations with Africa

    OpenAIRE

    Nilsson, David

    2013-01-01

    The international image of Sweden is one of a small, democratic and peace-loving country without the moral burden of a colonial past. This image has been reproduced in Swedish government policy as well as in most historical accounts. However, in this Current African Issues publication, the notion that “Sweden lacks a colonial past in Africa” is brought into question. The Berlin Conference 1884-85 is perhaps the most infamous political event in the history of European domination of Africa. At ...

  6. Lithium diffusion in polyether ether ketone and polyimide stimulated by in situ electron irradiation and studied by the neutron depth profiling method

    Czech Academy of Sciences Publication Activity Database

    Vacík, Jiří; Hnatowicz, Vladimír; Attar, F. M. D.; Mathakari, N. L.; Dahiwale, S. S.; Dhole, S. D.; Bhoraskar, V. N.

    2014-01-01

    Roč. 169, č. 10 (2014), s. 885-891 ISSN 1042-0150 R&D Projects: GA ČR(CZ) GBP108/12/G108; GA MŠk(XE) LM2011019 Institutional support: RVO:61389005 Keywords : diffusion * lithium * neutron depth profiling * polymers Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 0.513, year: 2014

  7. Characterization of Electron Temperature and Density Profiles of Plasmas Produced by Nike KrF Laser for Laser Plasma Instability (LPI) Research

    Science.gov (United States)

    Oh, Jaechul; Weaver, J. L.; Phillips, L.; Obenschain, S. P.; Schmitt, A. J.; Kehne, D. M.; Chan, L.-Y.; Serlin, V.

    2011-10-01

    Previous experiments with Nike KrF laser (λ = 248 nm , Δν ~ 1 THz) observed LPI signatures near quarter critical density (nc / 4) in CH plasmas, however, detailed measurement of the temperature (Te) and density (ne) profiles was missing. The current Nike LPI campaign will perform experimental determination of the plasma profiles. A side-on grid imaging refractometer (GIR) is the main diagnostic to resolve Te and ne in space taking 2D snapshots of probe laser (λ = 266 nm , Δt = 8 psec) beamlets (50 μm spacing) refracted by the plasma at laser peak time. Ray tracing of the beamlets through hydrodynamically simulated (FASTRAD3D) plasma profiles estimates the refractometer may access densities up to ~ 0 . 2nc . With the measured Te and ne profiles in the plasma corona, we will discuss analysis of light data radiated from the plasmas in spectral ranges relevant to two plasmon decay and convective Raman instabilities. Validity of the (Te ,ne) data will also be discussed for the thermal transport study. Work supported by DoE/NNSA and ONR and performed at NRL.

  8. An outbreak of Salmonella Typhimurium infections in Denmark, Norway and Sweden, 2008.

    Science.gov (United States)

    Bruun, T; Sørensen, G; Forshell, L P; Jensen, T; Nygard, K; Kapperud, G; Lindstedt, B A; Berglund, T; Wingstrand, A; Petersen, R F; Müller, L; Kjelsø, C; Ivarsson, S; Hjertqvist, M; Löfdahl, S; Ethelberg, S

    2009-03-12

    In November-December 2008, Norway and Denmark independently identified outbreaks of Salmonella Typhimurium infections characterised in the multiple-locus variable number of tandem repeats analysis (MLVA) by a distinct profile. Outbreak investigations were initiated independently in the two countries. In Denmark, a total of 37 cases were identified, and multiple findings of the outbreak strain in pork and pigs within the same supply chain led to the identification of pork in various forms as the source. In Norway, ten cases were identified, and the outbreak investigation quickly indicated meat bought in Sweden as the probable source and the Swedish authorities were alerted. Investigations in Sweden identified four human cases and two isolates from minced meat with the distinct profile. Subsequent trace-back of the meat showed that it most likely originated from Denmark. Through international alert from Norway on 19 December, it became clear that the Danish and Norwegian outbreak strains were identical and, later on, that the source of the outbreaks in all three countries could be traced back to Danish pork. MLVA was instrumental in linking the outbreaks in the different countries and tracing the source. This outbreak illustrates that good international communication channels, early alerting mechanisms, inter-sectoral collaboration between public health and food safety authorities and harmonised molecular typing tools are important for effective identification and management of cross-border outbreaks. Differences in legal requirements for food safety in neighbouring countries may be a challenge in terms of communication with consumers in areas where cross-border shopping is common.

  9. Forecast of icing events at a wind farm in Sweden

    DEFF Research Database (Denmark)

    Davis, Neil; Hahmann, Andrea N.; Clausen, Niels-Erik

    2014-01-01

    This paper introduces a method for identifying icing events using a physical icing model, driven by atmospheric data from the Weather Research and Forecasting (WRF) model, and applies it to a wind park in Sweden. Observed wind park icing events were identified by deviation from an idealized power...

  10. The management of intermediate level wastes in Sweden

    International Nuclear Information System (INIS)

    Hultgren, Aa.; Thegerstroem, C.

    1980-01-01

    A brief overview of current practices and research in Sweden on the management of intermediate level wastes is given. Intermediate level wastes include spent resins, filters and core components from the six power reactors in operation; radioactive wastes from nuclear fuel development at Studsvik and from non-nuclear applications are a minor contribution. (Auth.)

  11. Social Policy and Immigrant Joblessness in Britain, Germany and Sweden

    Science.gov (United States)

    Kesler, Christel

    2006-01-01

    I examine patterns of joblessness among immigrant men and women from 33 countries of origin now living in Britain, Germany and Sweden. Access to welfare, access to the labor market, job segregation and institutional support for women's employment define distinct policy configurations in these three destinations. Findings show that gaps in…

  12. At the Bridging Point: Tutoring Newly Arrived Students in Sweden

    Science.gov (United States)

    Avery, Helen

    2017-01-01

    In Sweden, tutoring in the mother tongue is a special support measure primarily intended for newly arrived students to facilitate their transition into the Swedish school system. Tutoring is premised on the collaboration between the class teacher, responsible for subject-related expertise, and the tutor, who contributes with knowledge of the…

  13. Students' Perspectives on Raising Achievement through Inclusion in Essunga, Sweden

    Science.gov (United States)

    Allan, Julie; Persson, Elisabeth

    2016-01-01

    A Swedish municipality that has transformed its position at the bottom of the national school league tables to top within three years--through inclusive education--has attracted much attention both in Sweden and internationally. This article offers the students' perspectives on the transformation and how they have experienced success. A social…

  14. Consequences of the Chernobyl accident for reindeer husbandry in Sweden

    International Nuclear Information System (INIS)

    Åhman, G.; Rydberg, A.; Åhman, B.

    1990-01-01

    Large parts of the reindeer hearding area in Sweden were contaminated with radioactive caesium from the Chernobyl fallout. During the first year after the accident no food with activity concentrations exceeding 300 Bq/kg was allowed to be sold in Sweden. This meant that about 75% of all reindeer meat produced in Sweden during the autumn and winter 1986/87 were rejected because of too high caesium activités. In May 1987 the maximum level for Cs-137 in reindeer, game and fresh-water fish was raised to 1500 Bq/kg. During the last two year, 1987/88 and 1988/89, about 25% of the slaughtered reindeer has had activities exceeding this limit. The effective long-time halflife or radiocaesium in reindeer after the nuclear weapon tests in the sixties was about 7 years. If this halflife is correct also for the Chernobyl fallout it will take about 35 years before most of the reinder in Sweden are below the current limit 1500 Bq/kg in the winter. However, by feeding the animals uncontaminated food for about two months, many reindeer can be saved for human consumption

  15. Coordination between primary and secondary healthcare in Denmark and Sweden

    Directory of Open Access Journals (Sweden)

    Sarah Wadmann

    2009-03-01

    Full Text Available Introduction: Insights into effective policy strategies for improved coordination of care is needed. In this study we describe and compare the policy strategies chosen in Denmark and Sweden, and discuss them in relation to interorganisational network theory. Policy practice: The policy initiatives to improve collaboration between primary and secondary healthcare in Denmark and Sweden include legislation and agreements aiming at clarifying areas of responsibility and defining requirements, creation of links across organisational boarders. In Denmark many initiatives have been centrally induced, while development of local solutions is more prominent in Sweden. Many Danish initiatives target the administrative level, while in Sweden initiatives are also directed at the operational level. In both countries economic incentives for collaboration are weak or lacking, and use of sanctions as a regulatory mean is limited. Discussion and conclusion: Despite a variety of policy initiatives, lacking or poorly developed structures to support implementation function as barriers for coordination. The two cases illustrate that even in two relatively coherent health systems, with regional management of both the hospital and general practice sector, there are issues to resolve in regard to administrative and operational coordination. The interorganisational network literature can provide useful tools and concepts for interpreting such issues.

  16. Consequences of the Chernobyl accident for reindeer husbandry in Sweden

    Directory of Open Access Journals (Sweden)

    Gustaf Åhman

    1990-09-01

    Full Text Available Large parts of the reindeer hearding area in Sweden were contaminated with radioactive caesium from the Chernobyl fallout. During the first year after the accident no food with activity concentrations exceeding 300 Bq/kg was allowed to be sold in Sweden. This meant that about 75% of all reindeer meat produced in Sweden during the autumn and winter 1986/87 were rejected because of too high caesium activités. In May 1987 the maximum level for Cs-137 in reindeer, game and fresh-water fish was raised to 1500 Bq/kg. During the last two year, 1987/88 and 1988/89, about 25% of the slaughtered reindeer has had activities exceeding this limit. The effective long-time halflife or radiocaesium in reindeer after the nuclear weapon tests in the sixties was about 7 years. If this halflife is correct also for the Chernobyl fallout it will take about 35 years before most of the reinder in Sweden are below the current limit 1500 Bq/kg in the winter. However, by feeding the animals uncontaminated food for about two months, many reindeer can be saved for human consumption.

  17. The Progressive Development of Environmental Education in Sweden and Denmark

    Science.gov (United States)

    Breiting, Soren; Wickenberg, Per

    2010-01-01

    Our paper traces the history and progressive development of environmental education and education for sustainable development (ESD) in Sweden and Denmark. Our main focus is on work in primary and lower secondary schools as part of a search for trends of international interest related to the conceptualisation and practice of environmental education…

  18. The Use of Personal Identity Numbers in Sweden and Denmark

    DEFF Research Database (Denmark)

    Hyltén-Cavallius, Katarina

    2015-01-01

    The paper of Katarina Hyltén-Cavallius focuses on personal identity numbers in Sweden and Denmark. This paper looks into formal and informal structures, which organise society in a host member state and which can make it difficult for a non-national Union citizen to, in practice, access public an...

  19. Is There Hidden Potential for Rural Population Growth in Sweden?

    Science.gov (United States)

    Niedomysl, Thomas; Amcoff, Jan

    2011-01-01

    Rural depopulation is a concern in many countries, and various policy initiatives have been taken to combat such trends. This article examines whether hidden potential for rural population growth can be found in Sweden. If such potential exists, it implies that the development prospects for many rural areas are not as unpromising as they may seem…

  20. Energy policies of IEA countries. Sweden 1996 review

    International Nuclear Information System (INIS)

    1996-01-01

    This IEA report provides a comprehensive, in-depth assessment of the energy policies of Sweden, including recommendations on future policy developments. Electricity is a focal point of Sweden's energy policy. After a shift in the energy mix to favour electricity in the early 1970's, nuclear and hydro power each make up about half of the electricity supply. Two key events have occurred since then: the 1980 referendum, which calls for the phase-out of all nuclear plants by 2010; the recent restructuring and liberalization of the electricity sector with the creation of a Nordic electricity market. In this context, the report argues the case for making a decision now on the nuclear issue to clarify Sweden's electricity future. Other key issues highlighted in the report include Sweden's use of economic policy instruments such as a carbon tax to achieve energy and environment goals, and the adequacy and effectiveness of government efforts to promote biofuels and energy efficiency. This report forms part of a series of periodic in-depth reviews conducted and discussed by the IEA Member countries on a four-year cycle. Short reviews of energy policy developments in all twenty-three Member countries are published annually in Energy Policies of IEA Countries. (author). 13 figs., 9 tabs., 4 appends

  1. The Role of the School Library: Reflections from Sweden

    Science.gov (United States)

    Avery, Helen

    2014-01-01

    Libraries are critical learning spaces and may play a significant role in intercultural education initiatives, particularly in Sweden where the national curriculum ascribes central functions to libraries for learning activities. Unfortunately, the ways in which teachers and librarians may collaborate to leverage mutual resources is not fully…

  2. M.S.Sigyn - Simbol of Sweden waste transport success

    International Nuclear Information System (INIS)

    Gustavson, B.; Dibek, P.

    1995-01-01

    The article is devoted to the presently existing system in Sweden of spent nuclear fuel and radioactive wastes maritime transportation from NPPs to places of permanent and intermediate storage. Transport casks and penals, their maintenance and control system are described. Explanatory work with public is partially also considered. 1 tab

  3. Comparison of the energy structures in Denmark, France and Sweden

    International Nuclear Information System (INIS)

    Nifenecker, H.

    2003-12-01

    Denmark is an example of country which involves massively in the renewable energies development and in the energy efficiency, since 1980. Facing this policy, France and Sweden produce their energy without fossil energies, mainly from nuclear and hydroelectric power. These countries energy policies, providing not much of carbon dioxide emission, are compared by the author. (A.L.B.)

  4. Life Satisfaction among Outbound Students in Northern Sweden

    Science.gov (United States)

    Nilsson, Per A.

    2015-01-01

    The transition from one's home country to a university abroad can be demanding. This study is a follow-up study exploring life satisfaction among outbound students. Outbound students at Umeå University, Sweden, were surveyed before and after experiencing studying abroad. Thus, the students' life satisfaction could be compared after an…

  5. Parental Divorce and Union Disruption among Young Adults in Sweden

    Science.gov (United States)

    Gahler, Michael; Hong, Ying; Bernhardt, Eva

    2009-01-01

    This article analyzes the impact of parental divorce on the disruption of marital and nonmarital unions among young adults in Sweden, using longitudinal data from repeated mail questionnaire surveys (1999 and 2003) with 1,321 respondents (aged 26, 30, and 34 in 2003). The study takes into account several possible mechanisms governing the…

  6. Russia’s Security Relations with Finland, Norway, and Sweden

    Science.gov (United States)

    2017-09-01

    NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS Approved for public release. Distribution is unlimited. RUSSIA’S SECURITY... RELATIONS WITH FINLAND, NORWAY, AND SWEDEN by Rory J. Hayden September 2017 Thesis Advisor: Mikhail Tsypkin Co-Advisor: David S. Yost...THIS PAGE INTENTIONALLY LEFT BLANK i REPORT DOCUMENTATION PAGE Form Approved OMB No. 0704-0188 Public reporting burden for this collection of

  7. Privatizing Education: Free School Policy in Sweden and England

    Science.gov (United States)

    Wiborg, Susanne

    2015-01-01

    The aim of this article is to investigate why Sweden, the epitome of social democracy, has implemented education reforms leading to an extraordinary growth in Free Schools in contrast to liberal England, where Free School policy has been met with enormous resistance. Conventional wisdom would predict the contrary, but as a matter of fact Sweden…

  8. This is how we manage Sweden's radioactive waste. Activities 1995

    International Nuclear Information System (INIS)

    1996-01-01

    SKB operates systems and facilities for the management and final disposal of spent nuclear fuel and other radioactive waste in Sweden. SKB has conducted extensive R, D and D work with regard to constructing a spent fuel encapsulation plant and a deep repository in crystalline bedrock. This annual report treats all the different activities without going into technical details

  9. Biology and outbreaks of Microdiprion pallipes (Hymenoptera; Diprionidae) in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Olofsson, E. (Swedish Univ. of Agricultural Sciences, Uppsala (Sweden). Dept. of Entomology)

    1994-01-01

    During outbreaks, Microdiprion pallipes (Fall.) is the most destructive of the pine sawflies in Sweden. Its distribution includes most provinces, but damaging outbreaks have until recently occurred only in two inland areas in northern Sweden. These areas are characterised by high elevation, a harsh climate, and slow tree growth. The four recorded outbreak periods showed a 10 year periodicity. Outside these areas, a lesser outbreak occurred in 1988 to 1990, on the east coast (province of Uppland). Outbreak patterns, life history variation, and mortality factors were studied. Factors that may explain the distribution of outbreaks and the population patterns were identified.Experimental and observational evidence on the potential of various factors to influence fecundity, dispersal, and survival was evaluated. In the outbreak areas, there were few major population factors. Parasitism by Rhorus substitutor (Thunb.) was the largest cause of larval mortality and the only important density-dependent mortality factor. The different diapause strategies of M. pallipes and R. substitutor may contribute to stabilize this system. Different flight periods of the host and the parasitoid may explain a possible correlation between weather and outbreaks. Elsewhere in Sweden, where low population densities prevail, there may be similarities in population processes between M. pallipes and the other widely distributed diprionids with solitary larvae, which never have attained outbreak densities in Sweden. Interactions with other diprionids through shared natural enemies may be an important population process and may influence the distribution of outbreaks. 37 refs, 4 figs, 11 tabs

  10. The Ultimate in Flexitime: From Sweden, by Way of Volvo.

    Science.gov (United States)

    Bernstein, Paul

    1988-01-01

    In the Volvo component plant on Koping, Sweden, an innovative system of multiple shifts and flexible working hours is offered to employees. The system meets the needs of those who are available for work at certain times and helps curtail turnover and absenteeism. (JOW)

  11. Energy in Sweden. Facts and figures 1999; Energilaeget i siffror

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    This supplement contains the tabular data of most of the diagrams in the main publication (Energy in Sweden 1999, STEM-ET-82-1999). The figures are based on preliminary statistics, and there may be minor differences between similar data in different sections or tables etc. All table headings and notes are given in both Swedish and English.

  12. The Effect of Mixed-Age Classes in Sweden

    Science.gov (United States)

    Lindstrom, Elly-Ann; Lindahl, Erica

    2011-01-01

    Mixed-aged (MA) classes are a common phenomenon around the world. In Sweden, these types of classes increased rapidly during the 1980s and 1990s, despite the fact that existing empirical support for MA classes is weak. In this paper, the effect of attending an MA class during grades 4-6 on students' cognitive skills is estimated. Using a unique…

  13. Electric power supply in Sweden 1979/80

    International Nuclear Information System (INIS)

    1981-01-01

    Generation, transmission and consumption of electricity for the year 1979/80 in Sweden are review in this report. The net supply of electricity in TWh was 60.2 from hydro, 20.1 from nuclear, 12.1 from fossil thermal and 1.4 imported. Detailed statistics are given for both consumption and generation. (L.E.)

  14. Wood production potential in poplar plantations in Sweden

    International Nuclear Information System (INIS)

    Christersson, Lars

    2010-01-01

    Shortage of oil, large variations in exports from Russia of wood to Europe, plenty of abandoned agriculture land, new ideas about a more intensive silviculture; these circumstances are driving forces in Sweden for planting fast-growing poplar and hybrid aspen clones on suitable land. The advantage of such trees is that the wood can be used for both energy (heat, biofuels, electricity), paper and for construction. Poplar clones bred in the USA and Belgium, and older hybrid aspen clones from Sweden, together with new poplar clones collected and selected for Swedish conditions from British Columbia, Canada, were planted during the 1990s in south and central Sweden. The stem diameters and heights of the trees have been measured during the last 10 years and the woody biomass production above ground has been calculated. MAI for all the plantations is 10-31 m 3 or 3-10 ton DM per hectare with the highest annual woody production of 45 m 3 or 15 ton DM per hectare in some years in a very dense plantation in the most southern part of Sweden. All the plantations have been fenced for at least the first ten years. The damage has been caused by stem canker, insects, leaf rust and by moose after removal of the fences. The possibilities for the use of poplar plantations as energy forest and vegetation filters are discussed. (author)

  15. The mites associated with Ips typographus in Sweden

    Science.gov (United States)

    John C. Moser; Hubertus H. Eidmann; Jan R. Regnander

    1989-01-01

    Twenty-four species of mites were found associated with Ips typographus (Linnaeus) collected from pherommone traps in Sweden, bringing to 38 the total recorded for this scolytid. Because three of the species are parasites, it may be possible to use them in biological control of I. typographus. Couplets from an earlier key to these...

  16. Sweden's Engagement with the Democratic People's Republic of Korea

    DEFF Research Database (Denmark)

    Andersson, Magnus; Bae, Jinsun

    2015-01-01

    on semistructured interviews of individuals who have taken part in Swedish engagement programs. Findings: - Besides having its embassy in Pyongyang and serving as a protecting power for the U.S., Sweden has provided capacity building programs for North Korean government officials and scholars and has taken part...

  17. Wood production potential in poplar plantations in Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Christersson, Lars [Section of Short Rotation Forestry, VPE, SLU, Uppsala (Sweden)

    2010-09-15

    Shortage of oil, large variations in exports from Russia of wood to Europe, plenty of abandoned agriculture land, new ideas about a more intensive silviculture; these circumstances are driving forces in Sweden for planting fast-growing poplar and hybrid aspen clones on suitable land. The advantage of such trees is that the wood can be used for both energy (heat, biofuels, electricity), paper and for construction. Poplar clones bred in the USA and Belgium, and older hybrid aspen clones from Sweden, together with new poplar clones collected and selected for Swedish conditions from British Columbia, Canada, were planted during the 1990s in south and central Sweden. The stem diameters and heights of the trees have been measured during the last 10 years and the woody biomass production above ground has been calculated. MAI for all the plantations is 10-31 m{sup 3} or 3-10 ton DM per hectare with the highest annual woody production of 45 m{sup 3} or 15 ton DM per hectare in some years in a very dense plantation in the most southern part of Sweden. All the plantations have been fenced for at least the first ten years. The damage has been caused by stem canker, insects, leaf rust and by moose after removal of the fences. The possibilities for the use of poplar plantations as energy forest and vegetation filters are discussed. (author)

  18. 75 FR 57815 - Purified Carboxymethylcellulose From Finland, Mexico, Netherlands, and Sweden

    Science.gov (United States)

    2010-09-22

    ... Carboxymethylcellulose From Finland, Mexico, Netherlands, and Sweden AGENCY: United States International Trade Commission... carboxymethylcellulose from Finland, Mexico, Netherlands, and Sweden. SUMMARY: The Commission hereby gives notice of the... carboxymethylcellulose from Finland, Mexico, Netherlands, and Sweden would be likely to lead to continuation or...

  19. Licensing procedure for nuclear power in Sweden. An international look with lessons for Sweden

    International Nuclear Information System (INIS)

    Gaahlin, Emil; Nilsson, Isabelle; Pettersson, Maria; Soederholm, Patrik

    2011-02-01

    In this study we present an in-depth analysis of the existing licensing procedure for nuclear power in Sweden, and the related processes towards different public authorities. In order to put the existing legislation into context we also analyze the legal and political prerequisites for the establishment of nuclear reactors during the 1970s. The purpose of this report is thus to: (a) analyze the legal and political conditions under which the existing nuclear power plants in Sweden were built; and (b) review and analyze the existing licensing procedure for nuclear power in the country. Four main statutes (and several subordinated regulations) apply in connection with the establishment of a new nuclear plant in Sweden, including the adoption of physical plans, a principal governmental decision on the permissibility of the plant and at least five major licenses. Physical planning according to the Planning and Building Act is primarily a municipal responsibility. A plan has to meet certain environmental requirements; not least the 'provisions on efficient management of natural resources' in the Environmental Code, indicating how different kinds of land and water areas should be used and thereby direct the location of different installations. The Swedish rules are complex and vague in many respects, and may therefore imply major uncertainties for a prospective investor. The legal protection is less unclear if an area is of national interest for a specific purpose, such as nature conservation, where it normally would not be possible to locate, say, a nuclear power plant. An area may also be of national interest for nuclear plants, which of course significantly alters the preconditions in favour of the plant project. The physical planning procedure comprises an 'environmental consideration' of the plan, including an 'environmental impact assessment' (EIA), provided the plan is likely to have significant effects on the environment. This 'programmatic EIA' does however not

  20. Two center electron emission in collisions of fast ions with H, and H2: Interplay between interference and Compton profile effect

    International Nuclear Information System (INIS)

    Misra, D.; Kumar, Ajay; Kadhane, U.R.; Fainstein, P.D.; Tribedi, L.C.

    2006-01-01

    Young type interference effect has been studied in case of particle induced ionization of H 2 . Oscillations are derived by comparing the measured DDCS for H 2 with the calculated DDCS for H. The effect of the Compton profiles of H 2 and H on the interference structure is also studied. A theoretical model based on molecular distorted wave calculation explains the experimental results qualitatively

  1. Measurements of Electron Temperature and Density Profiles of Plasmas Produced by Nike KrF Laser for Laser Plasma Instability (LPI) Research

    Science.gov (United States)

    Oh, Jaechul; Weaver, J. L.; Obenschain, S. P.; Schmitt, A. J.; Kehne, D. M.; Karasik, M.; Chan, L.-Y.; Serlin, V.; Phillips, L.

    2012-10-01

    ExperimentsfootnotetextJ. Oh, et al, GO5.4, APS DPP (2010).^,footnotetextJ. L. Weaver, et al, GO5.3, APS DPP (2010). using Nike KrF laser observed LPI signatures from CH plasmas at the laser intensities above ˜1x10^15 W/cm^2. Knowing spatial profiles of temperature (Te) and density (ne) in the underdense coronal region (0 Nike LPI experiment, a side-on grid imaging refractometer (GIR)footnotetextR. S. Craxton, et al, Phys. Fluids B 5, 4419 (1993). is being deployed for measuring the underdense plasma profiles. The GIR will resolve Te and ne in space taking a 2D snapshot of probe laser (λ= 263 nm, δt = 10 psec) beamlets (50μm spacing) refracted by the plasma at a selected time during the laser illumination. Time-resolved spectrometers with an absolute-intensity-calibrated photodiode array and a streak camera will simultaneously monitor light emission from the plasma in spectral ranges relevant to Raman (SRS) and two plasmon decay (TDP) instabilities. The experimental study of effects of the plasma profiles on the LPI initiation will be presented.

  2. Dose profile for electron beams obtained with CaSO{sub 4}:Ce,Eu thermoluminescent dosimeters; Perfil de dose de feixes de eletrons obtidos com dosimetros termoluminescentes de CaSO{sub 4}:Ce,Eu

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, Maira G.; Rodrigues, Leticia L.C., E-mail: mgnunes@ipen.br [Instituto de Pesquisas Energerticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2012-12-15

    The calcium sulphate activated with cerium and europium (CaSO{sub 4}:Ce,Eu) thermoluminescent dosimeters (TLD) recently developed at Nuclear and Energy Research Institute as well as the calcium sulphate activated with dysprosium (CaSO{sub 4}: Dy) and lithium fluoride activated with magnesium and titanium, (LiF:Mg,Ti; TLD-100) TLDs, with long term applications in dosimetry and considered as standards, were used to obtain the dose profile for 3.43, 5.48, 8.27 and 11.67 MeV electron beams generated by a linear accelerator Clinac 2100-C (Varian) in the reference conditions defined by the TRS-398 code of practice. The routine dosimetry of the electron beams, performed with a calibrated ionization chamber, ensures that the electron beams fulfill the requirements of flatness and symmetry established in this code of practice. Thus, as the TRS-398 Code of Practice requirements are fulfilled by the measurements performed with the new TLD type, CaSO{sub 4}:Ce,Eu may be applied in clinical dosimetry of high energy electron beams. (author)

  3. Profiling the interfacial electron gas of LaAlO{sub 3}/SrTiO{sub 3}(111) heterointerfaces

    Energy Technology Data Exchange (ETDEWEB)

    Gabel, Judith; Zapf, Michael; Scheiderer, Philipp; Schuetz, Philipp; Kirilmaz, Ozan; Sing, Michael; Claessen, Ralph [Physikalisches Institut and Roentgen Center for Complex Material Systems (RCCM), Universitaet Wuerzburg (Germany); Schlueter, Christoph; Lee, Tien-Lin [Diamond Light Source Ltd., Didcot (United Kingdom); Cancellieri, Claudia [EMPA, Laboratory of Joining Technologies and Corrosion, Duebendorf (Switzerland); Rogalev, Victor [Physikalisches Institut and Roentgen Center for Complex Material Systems (RCCM), Universitaet Wuerzburg (Germany); Swiss Light Source, Paul Scherrer Institute, Villigen (Switzerland); Strocov, Vladimir [Swiss Light Source, Paul Scherrer Institute, Villigen (Switzerland)

    2016-07-01

    Akin to the the well established LaAlO{sub 3}(LAO)/SrTiO{sub 3}(STO) (001) a two-dimensional electron system (2DES) also forms at the interface between LAO and STO in (111) orientation. In contrast to the (001) samples, the (111) oriented structures are predicted to display highly non-trivial topological properties induced by symmetry breaking and the peculiar real space lattice topology. We have investigated the electronic structure of the LAO/STO (111) heterostructure by hard and resonant soft X-ray photoemission. The momentum-resolved electronic structure of the interface Ti 3d states showcases the distinctive symmetry of the (111) orientation. These measurements as well as angular resolved hard X-ray photoemission measurements of the Ti 2p core level furthermore allow conclusions to be drawn about the spatial extent of the interfacial 2DES.

  4. Probing channel temperature profiles in Al{sub x}Ga{sub 1−x}N/GaN high electron mobility transistors on 200 mm diameter Si(111) by optical spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kyaw, L. M., E-mail: a0048661@nus.edu.sg [Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576 (Singapore); Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology, and Research), Singapore 117602 (Singapore); Bera, L. K.; Dolmanan, S. B.; Tan, H. R.; Bhat, T. N.; Tripathy, S., E-mail: tripathy-sudhiranjan@imre.a-star.edu.sg [Institute of Materials Research and Engineering, A*STAR (Agency for Science, Technology, and Research), Singapore 117602 (Singapore); Liu, Y.; Bera, M. K.; Singh, S. P.; Chor, E. F. [Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576 (Singapore)

    2014-08-18

    Using micro-Raman and photoluminescence (PL) techniques, the channel temperature profile is probed in Al{sub x}Ga{sub 1-x}N/GaN high electron mobility transistors (HEMTs) fabricated on a 200 mm diameter Si(111) substrate. In particular, RuO{sub x}-based gate is used due to the semitransparent nature to the optical excitation wavelengths, thus allowing much accurate thermal investigations underneath the gate. To determine the channel temperature profile in devices subjected to different electrical bias voltages, the GaN band-edge PL peak shift calibration with respect to temperature is used. PL analyses show a maximum channel temperature up to 435 K underneath the gate edge between gate and drain, where the estimated thermal resistance in such a HEMT structure is about 13.7 KmmW{sup −1} at a power dissipation of ∼10 W/mm. The temperature profiles from micro-Raman measurements are also addressed from the E{sub 2}-high optical phonon peak shift of GaN, and this method also probes the temperature-induced peak shifts of optical phonon from Si thus showing the nature of thermal characteristics at the AlN/Si substrate interface.

  5. Determination and analysis of non-linear index profiles in electron-beam-deposited MgOAl2O3ZrO2 ternary composite thin-film optical coatings

    International Nuclear Information System (INIS)

    Sahoo, N.K.; Thakur, S.; Senthilkumar, M.; Das, N.C.

    2005-01-01

    Thickness-dependent index non-linearity in thin films has been a thought provoking as well as intriguing topic in the field of optical coatings. The characterization and analysis of such inhomogeneous index profiles pose several degrees of challenges to thin-film researchers depending upon the availability of relevant experimental and process-monitoring-related information. In the present work, a variety of novel experimental non-linear index profiles have been observed in thin films of MgOAl 2 O 3 ZrO 2 ternary composites in solid solution under various electron-beam deposition parameters. Analysis and derivation of these non-linear spectral index profiles have been carried out by an inverse-synthesis approach using a real-time optical monitoring signal and post-deposition transmittance and reflection spectra. Most of the non-linear index functions are observed to fit polynomial equations of order seven or eight very well. In this paper, the application of such a non-linear index function has also been demonstrated in designing electric-field-optimized high-damage-threshold multilayer coatings such as normal- and oblique-incidence edge filters and a broadband beam splitter for p-polarized light. Such designs can also advantageously maintain the microstructural stability of the multilayer structure due to the low stress factor of the non-linear ternary composite layers. (orig.)

  6. Development of a model using narrow slit beam profiles to account for the backscatter response of an amorphous silicon electronic portal imaging device

    International Nuclear Information System (INIS)

    Maria Das, K.J.; Ostapiak, Orest

    2008-01-01

    An electronic portal imaging device (EPID), currently used for determining proper patient placement during irradiation in a radiotherapy treatment, can also be used for the purpose of pre- treatment IMRT QA. However, the Varian aS500 portal imager exhibits dosimetric artifacts caused by non-uniform backscatter from mechanical support structures located behind the imager

  7. Social Pedagogy in Finland and Sweden: a comparative analysis

    Directory of Open Access Journals (Sweden)

    Juha Hämäläinen

    2015-12-01

    Full Text Available Discussing how the concept of social pedagogy has been used in Finland and Sweden, this paper provides a historical and systemic comparison of policies and practices of social pedagogy in these two countries. The main aim is to identify and explain the main similarities and differences between the Finnish and Swedish national trajectories of social pedagogical thinking and action. In the first phase of the analysis, country-specific features of social pedagogy were described paying attention to historical and structural aspects. In the second phase, these descriptions were compared in a dialogue between the au- thors, one from Finland and the other from Sweden. The dialogue-based comparison was targeted to ex- plain the identified similar and different features of social pedagogical policies and practices. The explanation was based on historical and systemic considerations, especially those of historical development, research activities, theory buildings, methodologies and techniques, professionalization and the practice fields, and the future prospects of social pedagogy.The analysis showed that the historical roots and theoretical foundations of social pedagogical think- ing and action are very similar in Finland and Sweden but the position of social pedagogy  as an academic discipline  as well as a field of practice is partly different. Since social pedagogy has not been acknowl- edged as an academic discipline in Sweden, its outlook as a field of practice is on shaky ground, while in Finland the future of social pedagogy as an academic discipline  is uncertain because the social-peda- gogical know-how based on academic education is not well known and has not found general acceptance in the field’s practice.The analysis showed that the historical roots and theoretical foundations of social pedagogical thinking and action are very similar in Finland and Sweden but the position of social pedagogy as an academic discipline as well as a

  8. Data Profiling

    OpenAIRE

    Hladíková, Radka

    2010-01-01

    Title: Data Profiling Author: Radka Hladíková Department: Department of Software Engineering Supervisor: Ing. Vladimír Kyjonka Supervisor's e-mail address: Abstract: This thesis puts mind on problems with data quality and data profiling. This Work analyses and summarizes problems of data quality, data defects, process of data quality, data quality assessment and data profiling. The main topic is data profiling as a process of researching data available in existing...

  9. Acquisition and display of beam profilers

    International Nuclear Information System (INIS)

    David, L.; Duneau, P.; Lecorche, E.; Lermine, P.; Vila, J.; Maugeais, C.; Ulrich, M.

    1995-01-01

    The ion beam adjustment requires the knowledge of its shape (its profile). A new electronic interface has been developed for the older multiwire profiles, while an other electronic equipment has been developed for the gas profiles and the microchannel plates. The data from these interfaces are computed to get numerical values and profile shapes, then transmitted by the network to the main control room to be displayed (shapes and data) on every workstation, by different beam tuning programs. (author)

  10. Determination of CT number and density profile of binderless, pre-treated and tannin-based Rhizophora spp. particleboards using computed tomography imaging and electron density phantom

    International Nuclear Information System (INIS)

    Yusof, Mohd Fahmi Mohd; Hamid, Puteri Nor Khatijah Abdul; Tajuddin, Abdul Aziz; Bauk, Sabar; Hashim, Rokiah

    2015-01-01

    Plug density phantoms were constructed in accordance to CT density phantom model 062M CIRS using binderless, pre-treated and tannin-based Rhizophora Spp. particleboards. The Rhizophora Spp. plug phantoms were scanned along with the CT density phantom using Siemens Somatom Definition AS CT scanner at three CT energies of 80, 120 and 140 kVp. 15 slices of images with 1.0 mm thickness each were taken from the central axis of CT density phantom for CT number and CT density profile analysis. The values were compared to water substitute plug phantom from the CT density phantom. The tannin-based Rhizophora Spp. gave the nearest value of CT number to water substitute at 80 and 120 kVp CT energies with χ 2 value of 0.011 and 0.014 respectively while the binderless Rhizphora Spp. gave the nearest CT number to water substitute at 140 kVp CT energy with χ 2 value of 0.023. The tannin-based Rhizophora Spp. gave the nearest CT density profile to water substitute at all CT energies. This study indicated the suitability of Rhizophora Spp. particleboard as phantom material for the use in CT imaging studies

  11. Determination of CT number and density profile of binderless, pre-treated and tannin-based Rhizophora spp. particleboards using computed tomography imaging and electron density phantom

    Energy Technology Data Exchange (ETDEWEB)

    Yusof, Mohd Fahmi Mohd, E-mail: mfahmi@usm.my; Hamid, Puteri Nor Khatijah Abdul; Tajuddin, Abdul Aziz [School of Physics, Universiti Sains Malaysia, 11800 Penang (Malaysia); Bauk, Sabar [School of Distance Education, Universiti Sains Malaysia, 11800 Penang (Malaysia); Hashim, Rokiah [School of Industrial Technologies, Universiti Sains Malaysia, 11800 Penang (Malaysia)

    2015-04-29

    Plug density phantoms were constructed in accordance to CT density phantom model 062M CIRS using binderless, pre-treated and tannin-based Rhizophora Spp. particleboards. The Rhizophora Spp. plug phantoms were scanned along with the CT density phantom using Siemens Somatom Definition AS CT scanner at three CT energies of 80, 120 and 140 kVp. 15 slices of images with 1.0 mm thickness each were taken from the central axis of CT density phantom for CT number and CT density profile analysis. The values were compared to water substitute plug phantom from the CT density phantom. The tannin-based Rhizophora Spp. gave the nearest value of CT number to water substitute at 80 and 120 kVp CT energies with χ{sup 2} value of 0.011 and 0.014 respectively while the binderless Rhizphora Spp. gave the nearest CT number to water substitute at 140 kVp CT energy with χ{sup 2} value of 0.023. The tannin-based Rhizophora Spp. gave the nearest CT density profile to water substitute at all CT energies. This study indicated the suitability of Rhizophora Spp. particleboard as phantom material for the use in CT imaging studies.

  12. Measurements of Laser Plasma Instability (LPI) and Electron Density/Temperature Profiles in Plasmas Produced by the Nike KrF Laser

    Science.gov (United States)

    Oh, Jaechul; Weaver, J. L.; Serlin, V.; Obenschain, S. P.

    2016-10-01

    We will present results of simultaneous measurements of LPI-driven light scattering and density/temperature profiles in CH plasmas produced by the Nike krypton fluoride laser (λ = 248 nm). The primary diagnostics for the LPI measurement are time-resolved spectrometers with absolute intensity calibration in spectral ranges relevant to the optical detection of stimulated Raman scattering or two plasmon decay. The spectrometers are capable of monitoring signal intensity relative to thermal background radiation from plasma providing a useful way to analyze LPI initiation. For further understanding of LPI processes, the recently implemented grid image refractometer (Nike-GIR)a is used to measure the coronal plasma profiles. In this experiment, Nike-GIR is equipped with a 5th harmonic probe laser (λ = 213 nm) in attempt to probe into a high density region over the previous peak density with λ = 263 nm probe light ( 4 ×1021 cm-3). The LPI behaviors will be discussed with the measured data sets. Work supported by DoE/NNSA.

  13. Incidence of legal abortion in Sweden after the Chernobyl accident

    International Nuclear Information System (INIS)

    Odlind, V.; Ericson, A.

    1991-01-01

    The number of legal abortions in Sweden increased around the time of the Chernobyl accident, particularly in the summer and autumn of 1986. Although there was no recording of reasons for legal abortions, one might have suspected this increase to be a result of fear and anxiety after the accident. However, seen over a longer time perspective, the increase in the number of abortions started before and continued far beyond the time of the accident. There was also a simultaneous and pronounced increase in the number of births during the years subsequent to the accident. Therefore, it seems unlikely that fear of the consequences of radioactive fall-out after the Chernobyl accident resulted in any substantial increase of the number of legal abortions in Sweden

  14. Ambivalence about Children in the Family Building Process in Sweden

    Directory of Open Access Journals (Sweden)

    Bernhardt, Eva

    2014-12-01

    Full Text Available Sweden provides strong support for childbearing and parenthood, including generously subsidized medical, maternal, and child care, paid parental leave, and child allowances. In this context, attitudes towards parenthood are likely to have a particularly strong impact on the decision about whether and when to have children. We examine the links between first births and holding attitudes about children, not just of positive and negative attitudes, but also of ambivalence, namely those who both value children but also value the things that compete with parenthood for young adults’ time and other resources. Our analysis shows, measuring attitudes before the transition to parenthood, that ambivalence about childbearing delays the transition to parenthood, but not nearly as much as holding purely negative attitudes. Further, reporting an ambivalent experience from the first child had no significant effect on further childbearing, which testifies to the strong two-child norm in Sweden.

  15. A. Butovsky about the system of physical education in Sweden

    Directory of Open Access Journals (Sweden)

    Bubka S.N.

    2012-06-01

    Full Text Available The article presents an analysis of A. Butovsky's views on the physical education in Sweden, and, first of all, on the system of Swedish gymnastics. Alexey Butovsky got acquainted with it in 1892 while visiting that country on a mission trip, and later he generalized that system in some of his works. Positive and negative points of Swedish physical education, the role of the Royal Gymnastics Central Institute in Stockholm are examined, and some prominent figures of Sweden, who governed it at different periods, are characterized. Aspects of various exercises from this system are accentuated. It is marked that the Swedish gymnastics on the orientation, on principle differed composition of exercises and method of their application from other gymnastic systems in XIX century. It is underlined that exercises of the Swedish gymnastics differ naturalness of poses and motions, absence in them of maximal efforts, hard and rough motions.

  16. Reception and dissemination of American amateur telescope making in Sweden

    Science.gov (United States)

    Karnfelt, Johan

    2017-04-01

    This paper discusses the appropriation of the American Amateur Telescope Making (ATM) movement in Sweden in the 1940s and 1950s. A key player was the Swedish Astronomical Society, which in 1943, and inspired by the American example, launched a campaign to raise interest in ATM and disseminate the necessary knowledge amongst potential amateur astronomers. The campaign was successful and in just a few years it quadrupled the number of amateurs with access to telescopes. Swedish amateurs kept on building telescopes through the 1950s, but the activities then stalled with the introduction of cheap mass-market telescopes. The appropriation of ATM in Sweden is an important example of how technical innovations have shaped the course of amateur astronomy.

  17. Radioactive waste management in Sweden experiences and plans

    International Nuclear Information System (INIS)

    Wikstroem, M.

    1999-01-01

    Since some years, the necessary facilities are in operation in Sweden for the safe transport and storage of radioactive waste and spent fuel from nuclear power production. These include a final repository, SFR, for short-lived low and intermediate level waste, a central interim storage facility, CLAB, for spent fuel and a sea-based transport system. The experiences from the operation of these facilities have generally been very good. The next step is the development of an encapsulation facility and a deep repository for the spent nuclear fuel. R and D-work on direct disposal have been conducted in Sweden for more than 20 years. In the preferred method the spent fuel will be encapsulated in a copper canister with a steel internal structure, and the canister will then be disposed of at about 500 metres depth in the Swedish bedrock. The siting and design of the encapsulation facility and the deep repository is now in progress. (author)

  18. Epidemiology and Ecology of Tularemia in Sweden, 1984–2012

    Science.gov (United States)

    Desvars, Amélie; Furberg, Maria; Hjertqvist, Marika; Vidman, Linda; Sjöstedt, Anders; Rydén, Patrik

    2015-01-01

    The zoonotic disease tularemia is endemic in large areas of the Northern Hemisphere, but research is lacking on patterns of spatial distribution and connections with ecologic factors. To describe the spatial epidemiology of and identify ecologic risk factors for tularemia incidence in Sweden, we analyzed surveillance data collected over 29 years (1984–2012). A total of 4,830 cases were notified, of which 3,524 met all study inclusion criteria. From the first to the second half of the study period, mean incidence increased 10-fold, from 0.26/100,000 persons during 1984–1998 to 2.47/100,000 persons during 1999–2012 (ptularemia was higher than expected in the boreal and alpine ecologic regions (ptularemia in Sweden and illustrate that incidence is higher in locations near lakes and rivers. PMID:25529978

  19. Guide tube support pin experience at Ringhals plant, Sweden

    International Nuclear Information System (INIS)

    Ericsson, E.

    1984-01-01

    The intention with my presentation is to give an information about how we finally made the decision to make the replacement of Guide Tube Support Pin (GTSP) on unit 3 and how it was done. At the Ringhals Plant in Sweden, there are four units of which three are Westinghouse 3-loop PWR:s. One unit is an ASEA-ATOM BWR. Mainly due to climate reasons with a long and cold winter and switching to electrical heating in Swedish housing, a demand for highest possible availability of electrical power supply during the winter season has become a necessity. Therefore all refueling/maintenance outages for the nuclear units in Sweden are scheduled during the summer months, when also all recognized risks for disturbances during the following operation period have to be eliminated

  20. The MTO concept and organisational learning at Forsmark NPP, Sweden

    International Nuclear Information System (INIS)

    Andersson, Olle; Rollenhagen, Carl

    2002-01-01

    The term 'MTO' (Man-Technology-Organisation) has been widely used by Swedish utilities and regulators to describe knowledge and analytical techniques that focus on human and organisational factors and their relationship with nuclear safety. MTO was introduced in Sweden after the TMI accident as a concept similar to the 'Human Factors' (HF) concept developed in the USA. It was the intent that the explicit mention of the three interrelated elements in the concept - Man, Technology and Organisation - would stimulate a comprehensive 'system view' on nuclear safety. This view should go beyond a strict technological perspective to recognise and highlight human and organisational factors as important moderators of risk. In retrospect, the MTO concept has been successful in stimulating a socio-technological view of nuclear safety in Sweden - a general trend supported by international developments. A further step along this path has been taken with the LearnSafe project. (author)