The Impact of Product Assortment Size and Attribute Quantity on Information Searches

DEFF Research Database (Denmark)

Dörnyei, Krisztina Rita; Chrysochou, Polymeros; Krystallis, Athanasios

2017-01-01

Purpose: This paper investigates the impact of assortment size and attribute quantity on the depth and content of consumer information searches. Design/methodology/approach: For a computer-aided experiment using an information display board, participants (n=393) were placed in a simulated shopping...... situation that involved choosing a product among three sets of frequently purchased, low-involvement, FMCG alternatives. Findings: The findings show that when the assortment size increases, consumers acquire information from more products and cues but sacrifice product attributes. In particular...

Net present value analysis of the economic production quantity

OpenAIRE

Disney, Stephen Michael; Warburton, R. D. H.; Zhong, Q. C.

2013-01-01

Using Laplace transforms we extend the economic production quantity (EPQ) model by analysing cash flows from a net present value (NPV) viewpoint. We obtain an exact expression for the present value of the cash flows in the EPQ problem. From this, we are able to derive the optimal batch size. We obtain insights into the monotonicity and convexity of the present value of each of the cash flows, and show that there is a unique minimum in the present value of the sum of the cash flows in the exte...

Precise and efficient evaluation of gravimetric quantities at arbitrarily scattered points in space

Science.gov (United States)

Ivanov, Kamen G.; Pavlis, Nikolaos K.; Petrushev, Pencho

2017-12-01

Gravimetric quantities are commonly represented in terms of high degree surface or solid spherical harmonics. After EGM2008, such expansions routinely extend to spherical harmonic degree 2190, which makes the computation of gravimetric quantities at a large number of arbitrarily scattered points in space using harmonic synthesis, a very computationally demanding process. We present here the development of an algorithm and its associated software for the efficient and precise evaluation of gravimetric quantities, represented in high degree solid spherical harmonics, at arbitrarily scattered points in the space exterior to the surface of the Earth. The new algorithm is based on representation of the quantities of interest in solid ellipsoidal harmonics and application of the tensor product trigonometric needlets. A FORTRAN implementation of this algorithm has been developed and extensively tested. The capabilities of the code are demonstrated using as examples the disturbing potential T, height anomaly ζ , gravity anomaly Δ g , gravity disturbance δ g , north-south deflection of the vertical ξ , east-west deflection of the vertical η , and the second radial derivative T_{rr} of the disturbing potential. After a pre-computational step that takes between 1 and 2 h per quantity, the current version of the software is capable of computing on a standard PC each of these quantities in the range from the surface of the Earth up to 544 km above that surface at speeds between 20,000 and 40,000 point evaluations per second, depending on the gravimetric quantity being evaluated, while the relative error does not exceed 10^{-6} and the memory (RAM) use is 9.3 GB.

Quantity Stickiness versus Stackelberg Leadership

International Nuclear Information System (INIS)

Ferreira, F. A.

2008-01-01

We study the endogenous Stackelberg relations in a dynamic market. We analyze a twice-repeated duopoly where, in the beginning, each firm chooses either a quantity-sticky production mode or a quantity-flexible production mode. The size of the market becomes observable after the first period. In the second period, a firm can adjust its quantity if, and only if, it has adopted the flexible mode. Hence, if one firm chooses the sticky mode whilst the other chooses the flexible mode, then they respectively play the roles of a Stackelberg leader and a Stackelberg follower in the second marketing period. We compute the supply quantities at equilibrium and the corresponding expected profits of the firms. We also analyze the effect of the slope parameter of the demand curve on the expected supply quantities and on the profits.

Natural products phytotoxicity A bioassay suitable for small quantities of slightly water-soluble compounds.

Science.gov (United States)

Dornbos, D L; Spencer, G F

1990-02-01

A large variety of secondary metabolites that can inhibit germination and/or seedling growth are produced by plants in low quantities. The objective of this study was to develop a bioassay capable of reliably assessing reductions in germination percentage and seedling length of small-seeded plant species caused by exposure to minute quantities of these compounds. The germination and growth of alfalfa (Medicago saliva), annual ryegrass (Lolium multiflorum), and velvetleaf (Abutilon theophrasti) were evaluated against six known phytotoxins from five chemical classes; cinmethylin (a herbicidal cineole derivative) was selected as a comparison standard. Each phytotoxin, dissolved in a suitable organic solvent, was placed on water-agar in small tissue culture wells. After the solvent evaporated, imbibed seeds were placed on the agar; after three days, germination percentages and seedling lengths were measured. Compared to a commonly used filter paper procedure, this modified agar bioassay required smaller quantities of compound per seed for comparable bioassay results. This bioassay also readily permitted the measurement of seedling length, a more sensitive indicator of phytotoxicity than germination. Seedling length decreased sigmoidally as the toxin concentration increased logarithmically. Phytotoxicity was a function of both compound and plant species. Cinmethylin, a grass herbicide, reduced the length of annual ryegrass seedlings by 90-100%, whereas that of alfalfa and velvetleaf was inhibited slightly. The agar bioassay facilitated the rapid and reliable testing of slightly water-soluble compounds, requiring only minute quantities of each compound to give reproducible results.

Large quantity production of carbon and boron nitride nanotubes by mechano-thermal process

International Nuclear Information System (INIS)

Chen, Y.; Fitzgerald, J.D.; Chadderton, L.; Williams, J.S.; Campbell, S.J.

2002-01-01

Full text: Nanotube materials including carbon and boron nitride have excellent properties compared with bulk materials. The seamless graphene cylinders with a high length to diameter ratio make them as superstrong fibers. A high amount of hydrogen can be stored into nanotubes as future clean fuel source. Theses applications require large quantity of nanotubes materials. However, nanotube production in large quantity, fully controlled quality and low costs remains challenges for most popular synthesis methods such as arc discharge, laser heating and catalytic chemical decomposition. Discovery of new synthesis methods is still crucial for future industrial application. The new low-temperature mechano-thermal process discovered by the current author provides an opportunity to develop a commercial method for bulk production. This mechano-thermal process consists of a mechanical ball milling and a thermal annealing processes. Using this method, both carbon and boron nitride nanotubes were produced. I will present the mechano-thermal method as the new bulk production technique in the conference. The lecture will summarise main results obtained. In the case of carbon nanotubes, different nanosized structures including multi-walled nanotubes, nanocells, and nanoparticles have been produced in a graphite sample using a mechano-thermal process, consisting of I mechanical milling at room temperature for up to 150 hours and subsequent thermal annealing at 1400 deg C. Metal particles have played an important catalytic effect on the formation of different tubular structures. While defect structure of the milled graphite appears to be responsible for the formation of small tubes. It is found that the mechanical treatment of graphite powder produces a disordered and microporous structure, which provides nucleation sites for nanotubes as well as free carbon atoms. Multiwalled carbon nanotubes appear to grow via growth of the (002) layers during thermal annealing. In the case of BN

Sustainable economic production quantity models for inventory systems with shortage

DEFF Research Database (Denmark)

Taleizadeh, Ata Allah; Soleymanfar, Vahid Reza; Govindan, Kannan

2018-01-01

optimal values of inventory system variables, we solve four independent profit maximization problems for four different situations. These proposed models include a basic model in which shortages are not allowed, and when shortages are allowed, the lost sale, full backordering and partial backordering...... (EPQ). The theoretical sustainable EOQ and EPQ models are basic models that ignore many real-life conditions such as the possibility of stock-out in inventory systems. In this paper, we develop four new sustainable economic production quantity models that consider different shortage situations. To find...

Production capability and supply

International Nuclear Information System (INIS)

Klemenic, J.

1977-01-01

The strong market for uranium of recent years is about to usher in a new era in domestic uranium production. The spot market price of uranium has remained relatively stable at a little over $40/lb for more than 18 months. Many of the recent contracts for delivery in the early 1980s are calling for prices in the range of $40 to $65 per lb in year-of-delivery dollars. Low-grade, high-cost projects, such as uranium recovery from mill tailings and the reopening of ''mined-out'' ore bodies, have already been initiated. New underground mines to produce at greater depths, and new surface mines to recover lower grade ores, are being developed or seriously planned. In keeping with this movement to recover uranium from low-grade ore and other high cost materials, the Grand Junction Office has examined, for the first time, the production capability of the domestic industry assuming a $30/lb (or less) ''forward cost'' resource base. As in the past, keep in mind that the market price needed to stimulate full production of a given resource base may be significantly higher than the estimated forward cost of producing that resource. Results of the $30/lb study are presented

Managing Capabilities for Supply Chain Resilience Through it Integration

Directory of Open Access Journals (Sweden)

Gružauskas Valentas

2017-08-01

Full Text Available The trend for e-commerce, estimated population size to 11 billion by 2050, and an increase in urbanization level to 70 % is requiring to re-think the current supply chain. These trends changed the distribution process: delivery distances are decreasing, the product variety is increasing, and more products are being sold in smaller quantities. Therefore, the concept of supply chain resilience has gained more recognition in recent years. The scientific literature analysis conducted by the authors indicate several capabilities that influence supply chain resilience. Collaboration, flexibility, redundancy and integration are the most influential capabilities to supply chain resilience. However, the authors identify that the combination of these capabilities to supply chain resilience is under researched. The authors indicate that by combining these capabilities with the upcoming technologies of industry 4.0, supply chain resilience can be achieved. In the future, the authors are planning to conduct further research to identify the influence of these capabilities to supply chain resilience, to quantify supply chain resilience, and to provide further practices of industry 4.0 concept usage for supply chain resilience.

Product development capability and marketing strategy for new durable products

OpenAIRE

Banerjee, Sumitro; Soberman, David A.

2013-01-01

Our objective is to understand how a firm’s product development capability (PDC) affects the launch strategy for a durable product that is sequentially improved over time in a market where consumers have heterogeneous valuations for quality. We show that the launch strategy of firms is affected by the degree to which consumers think ahead. However, only the strategy of firms with high PDC is affected by the observability of quality. When consumers are myopic and quality is observable, both hi...

Design Management Capability and Product Innovation in SMEs

OpenAIRE

Fernández-Mesa, Ana Isabel; ALEGRE VIDAL, JOAQUIN; CHIVA GOMEZ, RICARDO; Gutiérrez Gracia, Antonio

2013-01-01

[EN] Purpose The aim of this paper is to present design management as a dynamic capability and to analyze its mediating role between organizational learning capability and product innovation performance in small and medium enterprises (SMEs). Design/methodology/approach Structural equation modeling is used to test the research hypotheses based on data from the Italian and Spanish ceramic tile industries. The data are derived from the responses of 182 companies (50 percent of the targ...

Economic production quantity concerning learning and the reworking of imperfect items

Directory of Open Access Journals (Sweden)

Tsai Deng-Maw

2012-01-01

Full Text Available The classical economic production quantity (EPQ model assumes that items produced are of perfect quality and the production rate is constant. However, production quality depends on the condition of the process. Due to process deterioration or other factors, the production process may shift and produce imperfect quality items. These imperfect quality items sometimes can be reworked and repaired; hence, overall production-inventory costs can be reduced significantly. In addition, it can be found in practice that the time or cost required to repetitively produce a unit of a product decreases when the number of units produced by a worker or a group of workers increases. Under this circumstance, the unit production cost cannot be regarded as constant and, therefore, cannot be ignored when taking account of the total cost. This paper incorporates the effects of learning and the reworking of defective items on the EPQ model since they were not considered in existing models. An optimal operation policy that minimizes the expected total cost per unit time is derived. A numerical example is provided to illustrate the proposed model. In addition, sensitivity analysis is performed and discussed.

The role of empowering organization capabilities on efficiency of new product development

Directory of Open Access Journals (Sweden)

Hoda Nikakhtar

2014-03-01

Full Text Available This paper presents an empirical investigation on the effects of empowering organizational capabilities on new product-development efficiency improvement and the proposed study is applied in one of Iranian food producers in city of Tehran, Iran. The study considers seven components including technological capabilities, marketing mix capabilities, capabilities for communication with customers, quality of new products, fast entry to market capabilities, customer satisfaction and economic success. The study designs a questionnaire in Likert scale and distributes it among 384 randomly selected people who regularly use different food products. Cronbach alphas for all components of the survey are within acceptable limits and it confirms the overall questionnaire in terms of various questions. The study has used t-student test as well as structural equation modeling to examine different hypotheses of the survey.

When are stockpiled products consumed faster? A convenience-salience framework of postpurchase consumption incidence and quantity

NARCIS (Netherlands)

Chandon, P.; Wansink, B.

2002-01-01

When people stockpile products, how do they decide when and how much they will consume? To answer this question, the authors develop a framework that shows how the salience and convenience of products influence postpurchase consumption incidence and quantity. Multiple research methods¿including

Materials characterization capabilities at DOE Nuclear Weapons Laboratories and Production Plants

International Nuclear Information System (INIS)

Pyper, J.W.

1984-06-01

The materials characterization and analytical chemistry capabilities at the 11 DOE Nuclear Weapons Laboratories or Production Plants have been surveyed and compared. In general, all laboratories have similar capabilities and equipment. Facilities or capabilities that are unique or that exist at only a few laboratories are described in detail

Joint optimization of economic production quantity and preventive maintenance with considering multi-products and reserve time

International Nuclear Information System (INIS)

Liu, Xuejuan; Wang, Binrong

2017-01-01

Purpose: We deal with the problem of the joint determination of optimal economic production quantity (EPQ) and optimal preventive maintenance (PM) for a system that can produce multiple products alternately. The objective is to find the optimal number of production cycles and the PM policy simultaneously by minimizing the cost model. Design/methodology/approach: Considering the products go through the system in a sequence and a complete run of all products forms a production cycle. In each cycle, beyond production time we also consider some reserve time for maintenance and setup, shortage and overproduction may occur. We study the integrated problem based on two PM policies, and explain the situation with the other PM policies. The delay – time concept is used to model PM decisions. Findings: Using the integrated EPQ and PM model, we can calculate the optimal production planning and PM schedule simultaneously, especially we consider multiple products in each production cycle, which is more practical and economic than previous works. Originality/value: In modern companies, the production planning and maintenance schedule share the same system, and traditional research about two activities is separated, that always generate conflicts, such as inadequate or excessive maintenance, and shortages, etc., so we develop the integrated EPQ and PM model to avoid these undesirable effects.

Joint optimization of economic production quantity and preventive maintenance with considering multi-products and reserve time

Energy Technology Data Exchange (ETDEWEB)

Liu, Xuejuan; Wang, Binrong

2017-07-01

Purpose: We deal with the problem of the joint determination of optimal economic production quantity (EPQ) and optimal preventive maintenance (PM) for a system that can produce multiple products alternately. The objective is to find the optimal number of production cycles and the PM policy simultaneously by minimizing the cost model. Design/methodology/approach: Considering the products go through the system in a sequence and a complete run of all products forms a production cycle. In each cycle, beyond production time we also consider some reserve time for maintenance and setup, shortage and overproduction may occur. We study the integrated problem based on two PM policies, and explain the situation with the other PM policies. The delay – time concept is used to model PM decisions. Findings: Using the integrated EPQ and PM model, we can calculate the optimal production planning and PM schedule simultaneously, especially we consider multiple products in each production cycle, which is more practical and economic than previous works. Originality/value: In modern companies, the production planning and maintenance schedule share the same system, and traditional research about two activities is separated, that always generate conflicts, such as inadequate or excessive maintenance, and shortages, etc., so we develop the integrated EPQ and PM model to avoid these undesirable effects.

Annunciation - building product team capabilities to support utility operational improvement

International Nuclear Information System (INIS)

Doucet, R.; Brown, R.; Trask, D.; Leger, R.; Mitchel, G.; Judd, R.; Davey, E.

2003-01-01

The purpose of this paper is to describe an AECL initiative to enhance the capabilities to assist utilities with undertaking annunciation improvement. This initiative was undertaken to complement a recent annunciation product upgrade, and in anticipation of developing commercial opportunities to assist Canadian and foreign utilities with control room annunciation improvement. Utilities are relying more and more on external engineering product and service providers to meet their plant support needs as they reduce in-house staffing to lower ongoing support costs. This evolving commercial environment places new demands on product and service providers, and provides new opportunities for increasing the proportion of product and service provider participation in plant improvement projects. This paper outlines recent AECL experience in the annunciation product area. The paper discusses the rationale for product support capability improvement, discusses the approaches undertaken, describes lessons learned, and outlines a proposed utility support model for assisting with future annunciation improvements. (author)

Optimized Gen-II FeCrAl cladding production in large quantity for campaign testing

Energy Technology Data Exchange (ETDEWEB)

Yamamoto, Yukinori [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sun, Zhiqian [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pint, Bruce A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Terrani, Kurt A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-06-03

There are two major objectives in this report; (1) to optimize microstructure control of ATF FeCrAl alloys during tube drawing processes, and (2) to provide an update on the progress of ATF FeCrAl tube production via commercial manufacturers. Experimental efforts have been made to optimize the process parameters balancing the tube fabricability, especially for tube drawing processes, and microstructure control of the final tube products. Lab-scale sheet materials of Gen II FeCrAl alloys (Mo-containing and Nb-containing FeCrAl alloys) were used in the study, combined with a stepwise warm-rolling process and intermediate annealing, aiming to simulate the tube drawing process in a commercial tube manufacturer. The intermediate annealing at 650ºC for 1h was suggested for the tube-drawing process of Mo-containing FeCrAl alloys because it successfully softened the material by recovering the work hardening introduced through the rolling step, without inducing grain coarsening due to recrystallization. The final tube product is expected to have stabilized deformed microstructure providing the improved tensile properties with sufficient ductility. Optimization efforts on Nb-containing FeCrAl alloys focused on the effect of alloying additions and annealing conditions on the stability of deformed microstructure. Relationships between the second-phase precipitates (Fe₂Nb-Laves phase) and microstructure stability are discussed. FeCrAl tube production through commercial tube manufacturers is currently in progress. Three different manufacturers, Century Tubes, Inc. (CTI), Rhenium Alloys, Inc. (RAI), and Superior Tube Company, Inc. (STC), are providing capabilities for cold-drawing, warm-drawing, and HPTR cold-pilgering, respectively. The first two companies are currently working on large quantity tube production (expected 250 ft length) of Gen I model FeCrAl alloy (B136Y3, at CTI) and Gen II (C35M4, at RAI), with the process parameters obtained from the experimental

Time-bound product returns and optimal order quantities for mass merchandisers

Science.gov (United States)

Yu, Min-Chun; Goh, Mark

2012-01-01

The return guidelines for a mass merchandiser usually entail a grace period, a markdown on the original price and the condition of the returned items. This research utilises eight scenarios formed from the variation of possible return guidelines to model the cost functions of single-product categories for a typical mass merchandiser. Models for the eight scenarios are developed and solved with the objective of maximising the expected profit so as to obtain closed form solutions for the associated optimal order quantity. An illustrative example and sensitivity analysis are provided to demonstrate the applicability of the model. Our results show that merchandisers who allow for returns within a time window, albeit with a penalty cost imposed and the returned products being recoverable, should plan for larger order amounts as such products do not affect the business. Similarly, the merchandisers who allow for returns beyond a grace period and without any penalty charges, but where the returned products are irrecoverable, should manage their stocks in this category more judiciously by ordering as little as possible so as to limit the number of returns and carefully consider the effects of their customer satisfaction-guaranteed policies, if any.

Technological capabilities, institutions and firm productivity: a multilevel study

Czech Academy of Sciences Publication Activity Database

Goedhuys, M.; Srholec, Martin

2015-01-01

Roč. 27, č. 1 (2015), s. 122-139 ISSN 0957-8811 Institutional support: PRVOUK-P23 Keywords : productivity * innovation * technological capability Subject RIV: AH - Economics Impact factor: 0.720, year: 2015

36 CFR 223.220 - Quantity determination.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 2 2010-07-01 2010-07-01 false Quantity determination. 223.220 Section 223.220 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER Special Forest Products § 223.220 Quantity determination...

Estimating the cost of production stoppage

Science.gov (United States)

Delionback, L. M.

1979-01-01

Estimation model considers learning curve quantities, and time of break to forecast losses due to break in production schedule. Major parameters capable of predicting costs are number of units made prior to production sequence, length of production break, and slope of learning curve produced prior to break.

Capability of the electromagnetic isotope-enrichment facility at ORNL

International Nuclear Information System (INIS)

Newman, E.

1982-01-01

The isotope separation program at Oak Ridge National Laboratory (ORNL) prepares and distributes electromagnetically enriched stable isotopes to the worldwide scientific community. Among the topics discussed in the present paper are the methods of enriching isotopes, the limitations that apply to the quantity and final assay of the separation products, and a generalized production flowsheet indicating the capability of the facility. A brief description of each of the production steps, from the selection and preparation of initial feedstock to the recovery and distribution of the isotopically enriched material, is presented. The future of the facility, the continued supply of enriched isotopes, and the response of the program to new and changing requirements are emphasized

Technological capabilities, institutions and firm productivity: a multilevel study

Czech Academy of Sciences Publication Activity Database

Goedhuys, M.; Srholec, Martin

2015-01-01

Roč. 27, č. 1 (2015), s. 122-139 ISSN 0957-8811 R&D Projects: GA ČR(CZ) GAP402/10/2310 Institutional support: RVO:67985998 Keywords : productivity * innovation * technological capability Subject RIV: AH - Economics Impact factor: 0.720, year: 2015

Survey of industrial coal conversion equipment capabilities: valves

Energy Technology Data Exchange (ETDEWEB)

Bush, W. A.; Slade, E. C.

1978-06-01

A survey of the industrial capabilities of the valve and valve-actuator industry to supply large, high-pressure stop valves for the future coal conversion industry is presented in this report. Also discussed are development and testing capabilities of valve and valve-actuator manufacturers and anticipated lead times required to manufacture advanced design valves for the most stringent service applications. Results indicate that the valve and valve-actuator industry is capable of manufacturing in quantity equipment of the size and for the pressure and temperature ranges which would be required in the coal conversion industry. Valve manufacturers do not, however, have sufficient product application experience to predict the continuing functional ability of valves used for lock-hopper feeders, slurry feeders, and slag-char letdown service. Developmental and testing efforts to modify existing valve designs or to develop new valve concepts for these applications were estimated to range from 1 to 6 years. A testing facility to simulate actuation of critical valves under service conditions would be beneficial.

The Acquisition of Quantity Contrasts in Guina-ang Bontok

Science.gov (United States)

Aoyama, Katsura; Reid, Lawrence A.

2016-01-01

This study reports on the acquisition of quantity contrasts in Guina-ang Bontok, an indigenous language spoken in the Philippines. Four-year-old and 5-year-old children's perception and production of quantity contrasts were examined using a pair of names that contrast in the quantity of the medial nasal. Frequencies of the quantity contrast were…

Equipment for nuclear medical centers, production capabilities of Rosatom enterprises

International Nuclear Information System (INIS)

Gavrish, Yu. N.; Koloskov, S. A.; Smirnov, V. P.; Strokach, A. P.

2015-01-01

Analysis of the capabilities of the State Corporation Rosatom enterprises on the development and production of diagnostic and therapeutic equipment for nuclear medicine centers is presented. Prospects of the development of accelerator equipment for the production of a wide range of radioisotope products are shown, and the trends of its development are determined. A comparative analysis of the technical parameters of domestic tomographs and devices for brachytherapy with foreign counterparts is given

Equipment for nuclear medical centers, production capabilities of Rosatom enterprises

Science.gov (United States)

Gavrish, Yu. N.; Koloskov, S. A.; Smirnov, V. P.; Strokach, A. P.

2015-12-01

Analysis of the capabilities of the State Corporation Rosatom enterprises on the development and production of diagnostic and therapeutic equipment for nuclear medicine centers is presented. Prospects of the development of accelerator equipment for the production of a wide range of radioisotope products are shown, and the trends of its development are determined. A comparative analysis of the technical parameters of domestic tomographs and devices for brachytherapy with foreign counterparts is given.

Critical review of uranium resources and production capability to 2020

International Nuclear Information System (INIS)

1998-08-01

This report was prepared to assess the changing uranium supply and demand situation as well as the adequacy of uranium resources and the production capability to supply uranium concentrate to meet reactor demand through 2020. Uranium production has been meeting only 50 to 60 percent of the world requirements with the balance met from sale of excess inventory offered on the market at low prices. It is generally agreed by most specialists that the end of the excess inventory is approaching. With inventory no longer able to meet the production shortfall it is necessary to significantly expand uranium production to fill an increasing share of demand. Non-production supplies of uranium, such as the blending of highly enriched uranium (HEU) warheads to produce low enriched reactor fuel and reprocessing of spent fuel, are also expected to grow in importance as a fuel source. This analysis addresses three major concerns as follows: adequacy of resources to meet projected demand; adequacy of production capability to produce the uranium; and market prices to sustain production to fill demand. This analysis indicates uranium mine production to be the primary supply providing about 76 to 78 percent of cumulative needs through 2020. Alternative sources supplying the balance, in order of relative importance are: (1) low enriched uranium (LEU) blended from 500 tonnes of highly enriched uranium (HEU) Russian weapons, plus initial US Department of Energy (US DOE) stockpile sales (11 to 13%); (2) reprocessing of spent nuclear fuel (6%) and; (3) utility and Russian stockpiles. Further this report gives uranium production profiles by countries: CIS producers (Kazakhstan, Russian Federation, Ukraine, Uzbekistan) and other producers (Australia, Canada, China, Gabon, Mongolia, Namibia, Niger, South Africa, United States of America)

Pengembangan Model Economic Production Quantity (EPQ dengan Sinkronisasi Demand Kontinu dan Diskrit Secara Simultan

Directory of Open Access Journals (Sweden)

Nurike Oktavia

2016-04-01

Full Text Available The most popular inventory model to determine production lot size is Economic Production Quantity (EPQ. It shows enterprise how to minimize total production cost by reducing inventory cost. But, three main parameters in EPQ which are demand, machine set up cost, and holding cost, are not suitable to solve issues nowadays. When an enterprise has two types of demand, continue and discrete demand, the basic EPQ would be no longer useful. Demand continues comes from a customer who wants their needs to be fulfilled every time per unit time, while the fulfillment of demand discrete is at a fixed interval of time. A literature review is done by writers to observe other formulation of EPQ model. As there is no other research can be found which adopt this topic, this study tries to develop EPQ model considering two types of demand simultaneously.

The Impact of Organizational Learning Capability on Product Innovation Performance: Evidence from the Turkish Manufacturing Sector

Directory of Open Access Journals (Sweden)

Özlem Yaşar Uğurlu

2016-02-01

Full Text Available This study aims to examine the effect of organizational learning capability on product innovation performance in the manufacturing sector using empirical data. A survey was conducted with 120 firms that were on the list of Top 1000 Firms of Turkey and registered with the Istanbul Chamber of Industry, to examine the relationship between the dimensions of organizational learning capability and the dimensions of product innovation performance. The findings of the study indicate a positive relationship between organizational learning capability and product innovation performance.

21 CFR 1314.20 - Restrictions on sales quantity.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Restrictions on sales quantity. 1314.20 Section 1314.20 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE RETAIL SALE OF SCHEDULED LISTED CHEMICAL PRODUCTS Sales by Regulated Sellers § 1314.20 Restrictions on sales quantity. (a) Without...

Organizational Capability Deployment Analysis for Technology Conversion into Processes, Products and Services

Directory of Open Access Journals (Sweden)

Tomoe Daniela Hamanaka Gusberti

2013-12-01

Full Text Available This article discusses Organizational Capabilities as the basic components of business models that emerged under the New Product Development Process and Technological Management. In the context of the new Technology Based Companies Development, it adopts a qualitative research in order to identify, analyze and underpin the organizational capability deployment in a process of technology conversion into product and service. The analysis was carried out considering concepts from literature review, in a technology based enterprise started by an academic spin-off company. The analysis enabled the elicitation of a Business Model and the discussion of their components, and correspondent evolution hypothesis. The paper provides an example of capability deployment accordingly the established theory illustrated by a case study. The study not just enumerate the needed partners, resources, customer channels, it enabled the description of their connection, representing the logic behind the decision made to develop the conceptual model. This detailed representation of the model allows better addressed discussions.

On pure-strategy Nash equilibria in price-quantity games

NARCIS (Netherlands)

Bos, I.; Vermeulen, A.J.

2015-01-01

This paper examines the existence and characteristics of pure-strategy Nash equilibria in oligopoly models in which firms set both prices and quantities. Existence is proved for a broad and natural class of price-quantity games. With differentiated products, the equilibrium outcome is similar to

Cloud-based systems for monitoring earthquakes and other environmental quantities

Science.gov (United States)

Clayton, R. W.; Olson, M.; Liu, A.; Chandy, M.; Bunn, J.; Guy, R.

2013-12-01

There are many advantages to using a cloud-based system to record and analyze environmental quantities such as earthquakes, radiation, various gases, dust and meteorological parameters. These advantages include robustness and dynamic scalability, and also reduced costs. In this paper, we present our experiences over the last three years in developing a cloud-based earthquake monitoring system (the Community Seismic Network). This network consists of over 600 sensors (accelerometers) in the S. California region that send data directly to the Google App Engine where they are analyzed. The system is capable of handing many other types of sensor data and generating a situation-awareness analysis as a product. Other advantages to the cloud-based system are integration with other peer networks, and being able to deploy anywhere in the world without have to build addition computing infrastructure.

Standardization and assessment of cell culture media quantities in roller poly ethylene terephthalate bottles employed in the industrial rabies viral vaccine production.

Science.gov (United States)

Jagannathan, S; Chaansha, S; Rajesh, K; Santhiya, T; Charles, C; Venkataramana, K N

2009-09-15

Vero cells are utilized for production of rabies vaccine. This study deals with the optimize quantity media require for the rabies vaccine production in the smooth roller surface. The rabies virus (Pasteur vaccine strain) is infected to monolayer of the various experimented bottles. To analyze the optimal quantity of media for the production of rabies viral harvest during the process of Vero cell derived rabies vaccine. The trials are started from 200 to 400 mL (PTARV-1, PTARV-2, PTARV-3, PTARV-4 and PTARV-5). The samples are taken in an appropriate time intervals for analysis of In Process Quality Control (IPQC) tests. The collected viral harvests are further processed to rabies vaccine in a pilot level and in addition to scale up an industrial level. Based on the evaluation the PTARV-2 (250 mL) show highly encouraging results for the Vero cell derived rabies vaccine production.

Application of an experimental irradiation facility type K-120 for the radiation treatment of agricultural products in large quantity

International Nuclear Information System (INIS)

Stenger, V.; Foeldiak, G.; Horvath, I.; Hargittai, P.; Bartfai, Cs.

1979-01-01

During experimental and pilot irradiation carried out by the 60 Co irradiation facility type K-120 of the Institute of Isotopes of the Hungarian Academy of Sciences an irradiation technology for the treatment of agricultural and food products of considerable density has been developed. Applying transport containers of commercial size the intermittent radiation treatment of great quantity products was made possible with homogeneous dose distribution. The radiation technical characteristics, the utilization coefficient and the capacity of the facility for every agricultural product were calculated. (author)

Memory for multiple cache locations and prey quantities in a food-hoarding songbird

Directory of Open Access Journals (Sweden)

Nicola eArmstrong

2012-12-01

Full Text Available Most animals can discriminate between pairs of numbers that are each less than four without training. However, North Island robins (Petroica longipes, a food hoarding songbird endemic to New Zealand, can discriminate between quantities of items as high as eight without training. Here we investigate whether robins are capable of other complex quantity discrimination tasks. We test whether their ability to discriminate between small quantities declines with 1. the number of cache sites containing prey rewards and 2. the length of time separating cache creation and retrieval (retention interval. Results showed that subjects generally performed above chance expectations. They were equally able to discriminate between different combinations of prey quantities that were hidden from view in 2, 3 and 4 cache sites from between 1, 10 and 60 seconds. Overall results indicate that North Island robins can process complex quantity information involving more than two discrete quantities of items for up to one minute long retention intervals without training.

Food product tracing technology capabilities and interoperability.

Science.gov (United States)

Bhatt, Tejas; Zhang, Jianrong Janet

2013-12-01

identify the supply-chain partner who provided the information prior to sharing this information with product tracing technology providers. The 9 traceability solution providers who agreed to participate in this project have their systems deployed in a wide range of sectors within the food industry including, but not limited to, livestock, dairy, produce, fruits, seafood, meat, and pork; as well as in pharmaceutical, automotive, retail, and other industries. Some have also been implemented across the globe including Canada, China, USA, Norway, and the EU, among others. This broad commercial use ensures that the findings of this work are applicable to a broad spectrum of the food system. Six of the 9 participants successfully completed the data entry phase of this test. To verify successful data entry for these 6, a demo or screenshots of the data set from each system's user interface was requested. Only 4 of the 6 were able to provide us with this evidence for verification. Of the 6 that completed data entry and moved on to the scenarios phase of the test, 5 were able to provide us with the responses to the scenarios. Time metrics were useful for evaluating the scalability and usability of each technology. Scalability was derived from the time it took to enter the nonstandardized data set into the system (ranges from 7 to 11 d). Usability was derived from the time it took to query the scenarios and provide the results (from a few hours to a week). The time was measured in days it took for the participants to respond after we supplied them all the information they would need to successfully execute each test/scenario. Two of the technology solution providers successfully implemented and participated in a proof-of-concept interoperable framework during Year 2 of this study. While not required, they also demonstrated this interoperability capability on the FSMA-mandated food product tracing pilots for the U.S. FDA. This has significant real-world impact since the

Networking capability and new product development

NARCIS (Netherlands)

Mu, J.; Di Benedetto, A.C.

2012-01-01

Current research on network theory remains largely focused on structures and outcomes without exploring the capability that firms need to build efficient and effective networks to their advantage. In this paper, we take a networking capability view in studying inter-firm relationships. We assume

Mining Waste Classification and Quantity of Non-Metal Minesin Slovenia

Directory of Open Access Journals (Sweden)

Ana Burger

2007-06-01

Full Text Available Mining is an important human activity that creates wealth and supplies materials for maintaining standard of living and further human development. However, mining has also negative impacts on the environment and society. One of them is the production of mining waste throughout the entire mining cycle, in particular in the mine development and operation /production stage.Due to the EU Directive 2006/21/EC on the management of waste from the extractive industries and its implementation in Member state, estimation on quality and quantity of mining waste from active non-metal mines in Slovenia was carried out. In the selected mines mining and processing was closely examined. With material flow analysis quantity and characteristics of mining waste were defined for several mines of different commodities.Data on mining waste were afterwards generalized in order to get an overall country evaluation on mining waste “production” of non-metal mines.Mining waste as a result of mining and beneficiation processes in non-metal mines of Slovenia is either inert or non-hazardous. Most of the mining waste is used for mine reclamation running simultaneously with the production phase. The largest amounts of mining waste per unit produced are created in dimension stone industry. Since the dimensionstone production is small, the waste amount is negligible. Large quantities of mining waste are produced in crushed stone and, sand and gravel operations, because aggregate production is pretty large with regard to other non-metals production in Slovenia. We can therefore conclude that large quantities of mining waste from non-metal mines, which are mostly used in reclamation and for side products, do not represent danger to the environment.

Entry-Item-Quantity-ABC Analysis-Based Multitype Cigarette Fast Sorting System

Directory of Open Access Journals (Sweden)

Ying Zhao

2012-01-01

Full Text Available Numerous items, small order, and frequent delivery are the characteristics of many distribution centers. Such characteristics generally increase the operating costs of the distribution center. To remedy this problem, this study employs the Entry-Item-Quantity (EIQ method to identify the characteristic of the cigarette distribution center and further analyzes the importance degree of customers and the frequently ordered products by means of EQ/EN/IQ-B/IK statistic charts. Based on these analyses as well as the total replenishment cost optimization model, multipicking strategies and combined multitype picking equipment allocation is then formulated accordingly. With such design scheme, the cigarette picking costs of the distribution center are expected to reduce. Finally, the specific number of equipment is figured out in order to meet the capability demand of the case cigarette distribution center.

Production capabilities in US nuclear reactors for medical radioisotopes

Energy Technology Data Exchange (ETDEWEB)

Mirzadeh, S.; Callahan, A.P.; Knapp, F.F. Jr. (Oak Ridge National Lab., TN (United States)); Schenter, R.E. (Westinghouse Hanford Co., Richland, WA (United States))

1992-11-01

The availability of reactor-produced radioisotopes in the United States for use in medical research and nuclear medicine has traditionally depended on facilities which are an integral part of the US national laboratories and a few reactors at universities. One exception is the reactor in Sterling Forest, New York, originally operated as part of the Cintichem (Union Carbide) system, which is currently in the process of permanent shutdown. Since there are no industry-run reactors in the US, the national laboratories and universities thus play a critical role in providing reactor-produced radioisotopes for medical research and clinical use. The goal of this survey is to provide a comprehensive summary of these production capabilities. With the temporary shutdown of the Oak Ridge National Laboratory (ORNL) High Flux Isotope Reactor (HFIR) in November 1986, the radioisotopes required for DOE-supported radionuclide generators were made available at the Brookhaven National Laboratory (BNL) High Flux Beam Reactor (HFBR). In March 1988, however, the HFBR was temporarily shut down which forced investigators to look at other reactors for production of the radioisotopes. During this period the Missouri University Research Reactor (MURR) played an important role in providing these services. The HFIR resumed routine operation in July 1990 at 85 MW power, and the HFBR resumed operation in June 1991, at 30 MW power. At the time of the HFBR shutdown, there was no available comprehensive overview which could provide information on status of the reactors operating in the US and their capabilities for radioisotope production. The obvious need for a useful overview was thus the impetus for preparing this survey, which would provide an up-to-date summary of those reactors available in the US at both the DOE-funded national laboratories and at US universities where service irradiations are currently or expected to be conducted.

Production capabilities in US nuclear reactors for medical radioisotopes

International Nuclear Information System (INIS)

Mirzadeh, S.; Callahan, A.P.; Knapp, F.F. Jr.; Schenter, R.E.

1992-11-01

The availability of reactor-produced radioisotopes in the United States for use in medical research and nuclear medicine has traditionally depended on facilities which are an integral part of the US national laboratories and a few reactors at universities. One exception is the reactor in Sterling Forest, New York, originally operated as part of the Cintichem (Union Carbide) system, which is currently in the process of permanent shutdown. Since there are no industry-run reactors in the US, the national laboratories and universities thus play a critical role in providing reactor-produced radioisotopes for medical research and clinical use. The goal of this survey is to provide a comprehensive summary of these production capabilities. With the temporary shutdown of the Oak Ridge National Laboratory (ORNL) High Flux Isotope Reactor (HFIR) in November 1986, the radioisotopes required for DOE-supported radionuclide generators were made available at the Brookhaven National Laboratory (BNL) High Flux Beam Reactor (HFBR). In March 1988, however, the HFBR was temporarily shut down which forced investigators to look at other reactors for production of the radioisotopes. During this period the Missouri University Research Reactor (MURR) played an important role in providing these services. The HFIR resumed routine operation in July 1990 at 85 MW power, and the HFBR resumed operation in June 1991, at 30 MW power. At the time of the HFBR shutdown, there was no available comprehensive overview which could provide information on status of the reactors operating in the US and their capabilities for radioisotope production. The obvious need for a useful overview was thus the impetus for preparing this survey, which would provide an up-to-date summary of those reactors available in the US at both the DOE-funded national laboratories and at US universities where service irradiations are currently or expected to be conducted

Industrial production quantities and uses of ten engineered nanomaterials in Europe and the world

Science.gov (United States)

Piccinno, Fabiano; Gottschalk, Fadri; Seeger, Stefan; Nowack, Bernd

2012-09-01

Not much is known so far about the amounts of engineered nanomaterials (ENM) that are produced but this information is crucial for environmental exposure assessment. This paper provides worldwide and Europe-wide estimates for the production and use of ten different ENM (TiO2, ZnO, FeO x , AlO x , SiO2, CeO2, Ag, quantum dots, CNT, and fullerenes) based on a survey sent to companies producing and using ENM. The companies were asked about their estimate of the worldwide or regional market and not about their company-specific production, information that they would be less likely to communicate. The study focused on the actual production quantities and not the production capacities. The survey also addressed information on distribution of the produced ENM to different product categories. The results reveal that some ENM are produced in Europe in small amounts (less than 10 t/year for Ag, QDs and fullerenes). The most produced ENM is TiO2 with up to 10,000 t of worldwide production. CeO2, FeO x , AlO x , ZnO, and CNT are produced between 100 and 1000 t/year. The data for SiO2 cover the whole range from less than 10 to more than 10,000 t/year, which is indicative of problems related to the definition of this material (is pyrogenic silica considered an ENM or not?). For seven ENM we have obtained the first estimates for their distribution to different product categories, information that also forms the base for life-cycle based exposure analysis.

Industrial production quantities and uses of ten engineered nanomaterials in Europe and the world

International Nuclear Information System (INIS)

Piccinno, Fabiano; Gottschalk, Fadri; Seeger, Stefan; Nowack, Bernd

2012-01-01

Not much is known so far about the amounts of engineered nanomaterials (ENM) that are produced but this information is crucial for environmental exposure assessment. This paper provides worldwide and Europe-wide estimates for the production and use of ten different ENM (TiO 2 , ZnO, FeO x , AlO x , SiO 2 , CeO 2 , Ag, quantum dots, CNT, and fullerenes) based on a survey sent to companies producing and using ENM. The companies were asked about their estimate of the worldwide or regional market and not about their company-specific production, information that they would be less likely to communicate. The study focused on the actual production quantities and not the production capacities. The survey also addressed information on distribution of the produced ENM to different product categories. The results reveal that some ENM are produced in Europe in small amounts (less than 10 t/year for Ag, QDs and fullerenes). The most produced ENM is TiO 2 with up to 10,000 t of worldwide production. CeO 2 , FeO x , AlO x , ZnO, and CNT are produced between 100 and 1000 t/year. The data for SiO 2 cover the whole range from less than 10 to more than 10,000 t/year, which is indicative of problems related to the definition of this material (is pyrogenic silica considered an ENM or not?). For seven ENM we have obtained the first estimates for their distribution to different product categories, information that also forms the base for life-cycle based exposure analysis.

Spatio-Temporal Impacts of Biofuel Production and Climate Variability on Water Quantity and Quality in Upper Mississippi River Basin

Directory of Open Access Journals (Sweden)

Debjani Deb

2015-06-01

Full Text Available Impact of climate change on the water resources of the United States exposes the vulnerability of feedstock-specific mandated fuel targets to extreme weather conditions that could become more frequent and intensify in the future. Consequently, a sustainable biofuel policy should consider: (a how climate change would alter both water supply and demand; and (b in turn, how related changes in water availability will impact the production of biofuel crops; and (c the environmental implications of large scale biofuel productions. Understanding the role of biofuels in the water cycle is the key to understanding many of the environmental impacts of biofuels. Therefore, the focus of this study is to model the rarely explored interactions between land use, climate change, water resources and the environment in future biofuel production systems. Results from this study will help explore the impacts of the US biofuel policy and climate change on water and agricultural resources. We used the Soil and Water Assessment Tool (SWAT to analyze the water quantity and quality consequences of land use and land management related changes in cropping conditions (e.g., more use of marginal lands, greater residue harvest, increased yields, plus management practices due to biofuel crops to meet the Renewable Fuel Standard target on water quality and quantity.

Publications as an indicator of increased tobacco control research productivity (quantity and quality) in New Zealand.

Science.gov (United States)

Kira, Anette; Glover, Marewa; Bullen, Chris; Viehbeck, Sarah

2011-06-01

Tobacco control (TC) research capacity and productivity are critical for developing evidence-informed interventions that will reduce the harmful effects of smoking. The aim of this paper was to investigate New Zealand's (NZ) TC research capacity along with the quantity and quality of publications, following two government initiatives aimed, in part, at improving the quantity and quality of NZ TC research. Scopus was searched for articles with at least one NZ author and where the topic was of primary relevance to TC. Publications were organized into two time periods, following the government initiatives, 1993-2003 and 2004-2009. We analyzed the number of publications, publication journals, type of publications, impact (using the impact factor), and authorship. There has been an increase in number and impact of publications and number of authors. The number of publications has increased from an average of 14 (1994-2003) to 38 per year (2004-2009). The number of journals published increased from 64 to 86. The impact during 2004-2009 was almost threefold than in 1993-2003. The number of authors increased from 212 to 345, and the number of authors who had at least one first-authored publication increased from 80 to 124. These results show an encouraging trend in NZ TC research, with an increase in research productivity, quality, and in research capacity. It is possible that government-initiated and -funded infrastructural support contributed to increasing needed TC research, which supports the worth of such initiatives.

76 FR 70164 - Certain Devices With Secure Communication Capabilities, Components Thereof, and Products...

Science.gov (United States)

2011-11-10

... capabilities, components thereof, and products containing the same. The complaint names Apple Inc. of Cupertino... behalf of VirnetX, Inc. on November 4, 2011. The complaint alleges violations of section 337 of the...

Short-lived radionuclide production capability at the Brookhaven Linac Isotope Producer

International Nuclear Information System (INIS)

Mausner, L.F.; Richards, P.

1985-01-01

The Brookhaven National Linac Isotope Producer is the first facility to demonstrate the capability of a large linear accelerator for efficient and economical production of difficult-to-make, medically useful radionuclides. The linac provides a beam of 200-MeV protons at an integrated beam current of up to 60 μA. The 200-MeV proton energy is very suitable for isotope production because the spallation process can create radionuclides unavailable at lower energy accelerators or reactors. Several medically important short-lived radionuclides are presently being prepared for on-site and off-site collaborative research programs. These are iodine-123, iron-52, manganese-52m, ruthenium-97, and the rubidium-81-krypton-81m system. The production parameters for these are summarized

Effects of Different Production Systems on Quality, Quantity of Milk and Postpartum Oestrus of Friesian Dairy Cows

International Nuclear Information System (INIS)

Hoka, A.I.; Muhuyi, B.W.; Mugo, B.; Ondabu, N.; Ondabu, F.; Inditie, W.D.; Ndagire, H.; Syomiti, M.

2014-01-01

Onset and establishment of lactation and estrus cycles are concomitant energy – competing processes.This is because metabolic events essential to milk secretion compete for available nutrients that support processes leading to the first postpartum estrus and subsequent fertility. Net energy deficits greater than 20 Mcal / day have been reported in high yielding dairy cows. The raw material from which milk constituent is derived and the energy for their synthesis in the mammary gland is supplied by the food intake. The objective of this study was therefore to determine the effect of production system on quality, quantity of milk, postpartum estrus and conception. Friesian cows that were seven months in – calf were enrolled for this study from three production systems: Zero grazing, roadside grazed Friesian milking dairy cows were enrolled for this study using random digits. Samples of the feeds were collected at the point of feeding and taken for analysis in a nutrition laboratory. Twenty milliliters of fresh milk was collected from each cow twice a day (Evening and Morning). Milk for progesterone was also collected and progesterone determined using radioimmunoassy to determine reproductive status postpartum. The samples were analyzed to determine milk component using ecomilk machine every morning. Production and reproduction detail of each cow was recorded. The data collected was subjected to GLM of SAS and the means were separated using studentised range test. Time of parturition , production system, age , season and sex of the calf affected the shape of the lactation curve. Cow that calved during drought took too long to cycle unlike the once that calved during the wet season for all the three production systems, the calves born during rainy season were more susceptible to diseases. There was significant variation (P<0.05) in milk production and Protein content within and across production systems. The zero grazed cows had produced most milk whereas the

Building Service Provider Capabilities

DEFF Research Database (Denmark)

Brandl, Kristin; Jaura, Manya; Ørberg Jensen, Peter D.

2015-01-01

In this paper we study whether and how the interaction between clients and the service providers contributes to the development of capabilities in service provider firms. In situations where such a contribution occurs, we analyze how different types of activities in the production process...... process. We find that clients influence the development of human capital capabilities and management capabilities in reciprocally produced services. While in sequential produced services clients influence the development of organizational capital capabilities and management capital capabilities....... of the services, such as sequential or reciprocal task activities, influence the development of different types of capabilities. We study five cases of offshore-outsourced knowledge-intensive business services that are distinguished according to their reciprocal or sequential task activities in their production...

QUANTITY DISCOUNTS IN SUPPLIER SELECTION PROBLEM BY USE OF FUZZY MULTI-CRITERIA PROGRAMMING

Directory of Open Access Journals (Sweden)

Tunjo Perić

2011-02-01

Full Text Available Supplier selection in supply chain is a multi-criteria problem that involves a number of quantitative and qualitative factors. This paper deals with a concrete problem of flour purchase by a company that manufactures bakery products and the purchasing price of flour depends on the quantity ordered. The criteria for supplier selection and quantities supplied by individual suppliers are: purchase costs, product quality and reliability of suppliers. The problem is solved using a model that combines revised weighting method and fuzzy multi-criteria linear programming (FMCLP. The paper highlights the efficiency of the proposed methodology in conditions when purchasing prices depend on order quantities.

A geochemical module for "AMDTreat" to compute caustic quantity, effluent quantity, and sludge volume

Science.gov (United States)

Cravotta,, Charles A.; Parkhurst, David L.; Means, Brent P; McKenzie, Bob; Morris, Harry; Arthur, Bill

2010-01-01

Treatment with caustic chemicals typically is used to increase pH and decrease concentrations of dissolved aluminum, iron, and/or manganese in largevolume, metal-laden discharges from active coal mines. Generally, aluminum and iron can be removed effectively at near-neutral pH (6 to 8), whereas active manganese removal requires treatment to alkaline pH (~10). The treatment cost depends on the specific chemical used (NaOH, CaO, Ca(OH)2, Na2CO3, or NH3) and increases with the quantities of chemical added and sludge produced. The pH and metals concentrations do not change linearly with the amount of chemical added. Consequently, the amount of caustic chemical needed to achieve a target pH and the corresponding effluent composition and sludge volume can not be accurately determined without empirical titration data or the application of geochemical models to simulate the titration of the discharge water with caustic chemical(s). The AMDTreat computer program (http://amd.osmre.gov/ ) is widely used to compute costs for treatment of coal-mine drainage. Although AMDTreat can use results of empirical titration with industrial grade caustic chemicals to compute chemical costs for treatment of net-acidic or net-alkaline mine drainage, such data are rarely available. To improve the capability of AMDTreat to estimate (1) the quantity and cost of caustic chemicals to attain a target pH, (2) the concentrations of dissolved metals in treated effluent, and (3) the volume of sludge produced by the treatment, a titration simulation is being developed using the geochemical program PHREEQC (wwwbrr.cr.usgs.gov/projects/GWC_coupled/phreeqc/) that will be coupled as a module to AMDTreat. The simulated titration results can be compared with or used in place of empirical titration data to estimate chemical quantities and costs. This paper describes the development, evaluation, and potential utilization of the PHREEQC titration module for AMDTreat.

Multi-item economic production quantity model for imperfect items with multiple production setups and rework under the effect of preservation technology and learning environment

Directory of Open Access Journals (Sweden)

Preeti Jawla

2016-09-01

Full Text Available This study aims to investigate the multi-item inventory model in a production/rework system with multiple production setups. Rework can be depicted as the transformation of production rejects, failed, or non-conforming items into re-usable products of the same or lower quality during or after inspection. Rework is very valuable and profitable, especially if materials are limited in availability and also pricey. Moreover, rework can be a good contribution to a ‘green image environment’. In this paper, we establish a multi-item inventory model to determine the optimal inventory replenishment policy for the economic production quantity (EPQ model for imperfect, deteriorating items with multiple productions and rework under inflation and learning environment. In inventory modelling, Inflation plays a very important role. In one cycle, production system produces items in n production setups and one rework setup, i.e. system follows (n, 1 policy. To reduce the deterioration of products preservation technology investment is also considered in this model. Holding cost is taken as time dependent. We develop expressions for the average profit per time unit, including procurement of input materials, costs for production, rework, deterioration cost and storage of serviceable and reworkable lots. Using those expressions, the proposed model is demonstrated numerically and the sensitivity analysis is also performed to study the behaviour of the model.

DESIGN OF OYSTER (PLEUROTUS OSTREATUS PRODUCTION UNIT TAKING INTO ACCOUNT ITS AGROTECHNIC OF GROWIGN AND QUALITY AND QUANTITY OF ITS PRODUCTION

Directory of Open Access Journals (Sweden)

Marcel Golian

2015-02-01

Full Text Available According to influence of population increasing followed by agricultural soils decreasing there is noticed a necessity of individual food commodities production intensification. There is also needed to think about some new unconventional and alternative sort of food-stuff. An edible mushroom growing is one of the relatively new agricultural branches, whereby on a large scale there are grown species which belong to saprophytic group. The aim of task was the building – technological and equipment – technological proposal of oyster (Pleurotus ostreatus, Jacq. P. Kumm production unit with taking account to its specific agro technical requirements and valid legislative. In the next part of task there were evaluated and compared qualitative and quantitative parameters of sporocarps from two variants which were collected in the first growth wave and accuracy of the proposed oyster production unit. In case of variant A there were used sacks with substrates, which have been exposed to cold shock by 6°C temperature for 4 days and in variant B were used substrates without cold shock. According to reached results the cold shock had almost neither influence on production quantity. There was found out an important fact that crop height from first growth wave wasn´t identical with well-known literature sources. The low crop is connected with high CO2 content in oyster production unit room, according to our opinion. Other equipment aimed to air humidity regulation, air temperature regulation and room lights was designed correctly.

16 CFR 500.25 - Net quantity, average quantity, permitted variations.

Science.gov (United States)

2010-01-01

... good distribution practice and which unavoidably result in change of weight or mass or measure. (c... good packaging practice: Provided, that such variations shall not be permitted to such extent that the... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Net quantity, average quantity, permitted...

Measurement of new operational quantities with radiation protection instruments designed for working area monitoring and for individual monitoring

International Nuclear Information System (INIS)

Prigent, R.; Chary, J.; Chemtob, M.; Lebouleux, P.

1992-01-01

The ICRP recommended a dose limitation system based on numerical evaluation of the dose equivalent to organs or tissues, H T , which are used to calculate the effective dose, H E , by weighting. The ICRU proposed new operational quantities accessible to measurement which are conservative with respect to these recommendations. The objective of this paper is to recall briefly the basic recommendations and to find out if radiation protection instruments presently used calibrated in terms of the previous quantities are capable to measure these new quantities. A dozen of practical cases are presented

Measurement of new operational quantities with radiation protection instruments designed for working area monitoring and for individual monitoring

International Nuclear Information System (INIS)

Prigent, R.; Chary, J.; Chemtob, M.

1992-01-01

The ICRP recommended a dose limitation system based on numerical evaluation of the dose equivalent to organs or tissues, H T , which are used to calculate the effective dose, H E , by weighting. The ICRU proposed new operational quantities accessible to measurement which are conservative with respect to these recommendations. The objective of this paper is to recall briefly the basic recommendations and to find out if radiation protection instruments presently used calibrated in terms of the previous quantities are capable to measure these new quantities. A dozen of practical cases are presented. (author)

Radiation quantities and units

International Nuclear Information System (INIS)

2013-01-01

This fifth chapter presents the conceptual evolution, the definition procedures, the radiological quantities themselves, the relation between them, the new operational quantities and the new quantities defined in the ICRP 60 that replaced ICRP 26 and was included in the CNEN-NN-3.01 standard of 2011

Joint decision of pricing and order quantity by considering product substitution in dual channel supply chain

Science.gov (United States)

Widodo, Erwin

2017-11-01

Dual channel supply chain (DCSC) has been attracting many researchers' attention. Their contributions mainly are in two folds, namely pricing problem and inventory policy. However, research to address both pricing and inventory problems simultaneously are still scarce. Meanwhile in recent competitive market, product substitution is an unavoidable practice in fulfilling customer demand when the main product is unavailable. Thus how to decide price and order quantity by considering product substitution under DCSC setting is an interesting topic to address. In this paper, corresponding mathematical model incorporating such problem is proposed. This model consists of objective function measuring sales revenue and inventory cost, and some constraints to assure positive profit margin, interplaying price between online and offline channel, and positive demand. Two pricing schemes, namely Vertical Nash and Stackelberg Leadership are evaluated. The result shows that in any situation of substitution level, Vertical Nash solution provides higher financial performance than that under Stackelberg Leadership. In addition, this work's results have also revealed that there exist some threshold values differentiating when it is better off to apply Vertical Nash scenario an, when Stackelberg Leadership scenario is preferable.

How tobacco companies have used package quantity for consumer targeting.

Science.gov (United States)

Persoskie, Alexander; Donaldson, Elisabeth A; Ryant, Chase

2018-05-31

Package quantity refers to the number of cigarettes or amount of other tobacco product in a package. Many countries restrict minimum cigarette package quantities to avoid low-cost packs that may lower barriers to youth smoking. We reviewed Truth Tobacco Industry Documents to understand tobacco companies' rationales for introducing new package quantities, including companies' expectations and research regarding how package quantity may influence consumer behaviour. A snowball sampling method (phase 1), a static search string (phase 2) and a follow-up snowball search (phase 3) identified 216 documents, mostly from the 1980s and 1990s, concerning cigarettes (200), roll-your-own tobacco (9), smokeless tobacco (6) and 'smokeless cigarettes' (1). Companies introduced small and large packages to motivate brand-switching and continued use among current users when faced with low market share or threats such as tax-induced price increases or competitors' use of price promotions. Companies developed and evaluated package quantities for specific brands and consumer segments. Large packages offered value-for-money and matched long-term, heavy users' consumption rates. Small packages were cheaper, matched consumption rates of newer and lighter users, and increased products' novelty, ease of carrying and perceived freshness. Some users also preferred small packages as a way to try to limit consumption or quit. Industry documents speculated about many potential effects of package quantity on appeal and use, depending on brand and consumer segment. The search was non-exhaustive, and we could not assess the quality of much of the research or other information on which the documents relied. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Entropy and Its Correlations with Other Related Quantities

Directory of Open Access Journals (Sweden)

Jing Wu

2014-02-01

Full Text Available In order to find more correlations between entropy and other related quantities, an analogical analysis is conducted between thermal science and other branches of physics. Potential energy in various forms is the product of a conserved extensive quantity (for example, mass or electric charge and an intensive quantity which is its potential (for example, gravitational potential or electrical voltage, while energy in specific form is a dissipative quantity during irreversible transfer process (for example mechanical or electrical energy will be dissipated as thermal energy. However, it has been shown that heat or thermal energy, like mass or electric charge, is conserved during heat transfer processes. When a heat transfer process is for object heating or cooling, the potential of internal energy U is the temperature T and its potential “energy” is UT/2 (called entransy and it is the simplified expression of thermomass potential energy; when a heat transfer process is for heat-work conversion, the potential of internal energy U is (1 − T0/T, and the available potential energy of a system in reversible heat interaction with the environment is U − U0 − T0(S − S0, then T0/T and T0(S − S0 are the unavailable potential and the unavailable potential energy of a system respectively. Hence, entropy is related to the unavailable potential energy per unit environmental temperature for heat-work conversion during reversible heat interaction between the system and its environment. Entropy transfer, like other forms of potential energy transfer, is the product of the heat and its potential, the reciprocal of temperature, although it is in form of the quotient of the heat and the temperature. Thus, the physical essence of entropy transfer is the unavailable potential energy transfer per unit environmental temperature. Entropy is a non-conserved, extensive, state quantity of a system, and entropy generation in an irreversible heat transfer process

Automated Decisional Model for Optimum Economic Order Quantity Determination Using Price Regressive Rates

Science.gov (United States)

Roşu, M. M.; Tarbă, C. I.; Neagu, C.

2016-11-01

The current models for inventory management are complementary, but together they offer a large pallet of elements for solving complex problems of companies when wanting to establish the optimum economic order quantity for unfinished products, row of materials, goods etc. The main objective of this paper is to elaborate an automated decisional model for the calculus of the economic order quantity taking into account the price regressive rates for the total order quantity. This model has two main objectives: first, to determine the periodicity when to be done the order n or the quantity order q; second, to determine the levels of stock: lighting control, security stock etc. In this way we can provide the answer to two fundamental questions: How much must be ordered? When to Order? In the current practice, the business relationships with its suppliers are based on regressive rates for price. This means that suppliers may grant discounts, from a certain level of quantities ordered. Thus, the unit price of the products is a variable which depends on the order size. So, the most important element for choosing the optimum for the economic order quantity is the total cost for ordering and this cost depends on the following elements: the medium price per units, the stock cost, the ordering cost etc.

Food quantity affects the sensitivity of Daphnia to road salt.

Science.gov (United States)

Brown, Arran H; Yan, Norman D

2015-04-07

Road deicing operations have raised chloride (Cl) levels in many temperate lakes in Europe and North America. These lakes vary widely in trophic status, but to date, no one has quantified the interaction between food quantity and road salt toxicity. We examined the effects of food quantity (particulate algal C concentration (C)) on the chronic toxicity of Cl to Daphnia in soft-water bioassays. There was a strong positive linear relationship (r(2) = 0.92 for NaCl and r(2) = 0.96 for CaCl2) between food quantity and Cl LC50. As food quantity increased from 0.2 to 1.0 mg C/L (levels characteristic of oligotrophic to eutrophic lakes, respectively), the chronic Cl LC50 increased from 55.7 to 284.8 mg Cl/L. Salt type (NaCl or CaCl2) did not affect the Cl LC50, Daphnia life history parameters, or the intrinsic rate of population increase (r). The life history parameter most sensitive to Cl was neonate production. Cl did not inhibit egg production, nor was the maternal lipid investment in eggs changed, but egg viability and the subsequent release of live neonates decreased as Cl levels increased and food decreased. Our results suggest the trophic status of lakes should be considered when assessing ecological threat from Cl.

[Relativity among starch quantity, polysaccharides content and total alkaloid content of Dendrobium loddigesii].

Science.gov (United States)

Zhu, Hua; Teng, Jianbei; Cai, Yi; Liang, Jie; Zhu, Yilin; Wei, Tao

2011-12-01

To find out the relativity among starch quantity, polysaccharides content and total alkaloid content of Dendrobium loddigesii. Microscopy-counting process was applied to starch quantity statistics, sulfuric acid-anthrone colorimetry was used to assay polysaccharides content and bromocresol green colorimetry was used to assay alkaloid content. Pearson product moment correlation analysis, Kendall's rank correlation analysis and Spearman's concordance coefficient analysis were applied to study their relativity. Extremely significant positive correlation was found between starch quantity and polysaccharides content, and significant negative correlation between alkaloid content and starch quantity was discovered, as well was between alkaloid content and polysaccharides content.

Deploy production sliding mesh capability with linear solver benchmarking.

Energy Technology Data Exchange (ETDEWEB)

Domino, Stefan P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Thomas, Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Barone, Matthew F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Williams, Alan B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ananthan, Shreyas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Knaus, Robert C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Overfelt, James [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sprague, Mike [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Rood, Jon [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2018-02-01

Wind applications require the ability to simulate rotating blades. To support this use-case, a novel design-order sliding mesh algorithm has been developed and deployed. The hybrid method combines the control volume finite element methodology (CVFEM) with concepts found within a discontinuous Galerkin (DG) finite element method (FEM) to manage a sliding mesh. The method has been demonstrated to be design-order for the tested polynomial basis (P=1 and P=2) and has been deployed to provide production simulation capability for a Vestas V27 (225 kW) wind turbine. Other stationary and canonical rotating ow simulations are also presented. As the majority of wind-energy applications are driving extensive usage of hybrid meshes, a foundational study that outlines near-wall numerical behavior for a variety of element topologies is presented. Results indicate that the proposed nonlinear stabilization operator (NSO) is an effective stabilization methodology to control Gibbs phenomena at large cell Peclet numbers. The study also provides practical mesh resolution guidelines for future analysis efforts. Application-driven performance and algorithmic improvements have been carried out to increase robustness of the scheme on hybrid production wind energy meshes. Specifically, the Kokkos-based Nalu Kernel construct outlined in the FY17/Q4 ExaWind milestone has been transitioned to the hybrid mesh regime. This code base is exercised within a full V27 production run. Simulation timings for parallel search and custom ghosting are presented. As the low-Mach application space requires implicit matrix solves, the cost of matrix reinitialization has been evaluated on a variety of production meshes. Results indicate that at low element counts, i.e., fewer than 100 million elements, matrix graph initialization and preconditioner setup times are small. However, as mesh sizes increase, e.g., 500 million elements, simulation time associated with \\setup-up" costs can increase to nearly 50% of

Impacts of biofuels production alternatives on water quantity and quality in the Iowa River Basin

Science.gov (United States)

Wu, Y.; Liu, S.

2012-01-01

Corn stover as well as perennial grasses like switchgrass (Panicum virgatum) and miscanthus are being considered as candidates for the second generation biofuel feedstocks. However, the challenges to biofuel development are its effects on the environment, especially water quality. This study evaluates the long-term impacts of biofuel production alternatives (e.g., elevated corn stover removal rates and the potential land cover change) on an ecosystem with a focus on biomass production, soil erosion, water quantity and quality, and soil nitrate nitrogen concentration at the watershed scale. The Soil and Water Assessment Tool (SWAT) was modified for setting land cover change scenarios and applied to the Iowa River Basin (a tributary of the Upper Mississippi River Basin). Results show that biomass production can be sustained with an increased stover removal rate as long as the crop demand for nutrients is met with appropriate fertilization. Although a drastic increase (4.7–70.6%) in sediment yield due to erosion and a slight decrease (1.2–3.2%) in water yield were estimated with the stover removal rate ranging between 40% and 100%, the nitrate nitrogen load declined about 6–10.1%. In comparison to growing corn, growing either switchgrass or miscanthus can reduce sediment erosion greatly. However, land cover changes from native grass to switchgrass or miscanthus would lead to a decrease in water yield and an increase in nitrate nitrogen load. In contrast to growing switchgrass, growing miscanthus is more productive in generating biomass, but its higher water demand may reduce water availability in the study area.

The Hartree product and the description of local and global quantities in atomic systems: A study within Kohn-Sham theory

International Nuclear Information System (INIS)

Garza, Jorge; Nichols, Jeffrey A.; Dixon, David A.

2000-01-01

The Hartree product is analyzed in the context of Kohn-Sham theory. The differential equations that emerge from this theory are solved with the optimized effective potential using the Krieger, Li, and Iafrate approximation, in order to get a local potential as required by the ordinary Kohn-Sham procedure. Because the diagonal terms of the exact exchange energy are included in Hartree theory, it is self-interaction free and the exchange potential has the proper asymptotic behavior. We have examined the impact of this correct asymptotic behavior on local and global properties using this simple model to approximate the exchange energy. Local quantities, such as the exchange potential and the average local electrostatic potential are used to examine whether the shell structure in an atom is revealed by this theory. Global quantities, such as the highest occupied orbital energy (related to the ionization potential) and the exchange energy are also calculated. These quantities are contrasted with those obtained from calculations with the local density approximation, the generalized gradient approximation, and the self-interaction correction approach proposed by Perdew and Zunger. We conclude that the main characteristics in an atomic system are preserved with the Hartree theory. In particular, the behavior of the exchange potential obtained in this theory is similar to those obtained within other Kohn-Sham approximations. (c) 2000 American Institute of Physics

The Quality of Quantity: Mini-UAVS As An Alternative UAV Acquisition Strategy at the Army Brigade Level

National Research Council Canada - National Science Library

Weed, Shawn

2002-01-01

This monograph asks should the U.S. Army alter its current UAV acquisition strategy for maneuver brigades from one in which limited numbers of high capability systems are acquired, in favor of another that fields a large quantity...

Manual of symbols and terminology for physicochemical quantities and units

CERN Document Server

Whiffen, D H

2013-01-01

Manual of Symbols and Terminology for Physicochemical Quantities and Units, 1979 Edition contains physical quantity tabulations of products. The Commission on Symbols, Terminology, and Units is a part of the Division of Physical Chemistry of the International Union of Pure and Applied Chemistry. Its general responsibilities are to secure clarity and precision, and wider agreement in the use of symbols, by chemists in different countries, among physicists, chemists, and engineers, and by editors of scientific journals. This book is composed of 13 chapters, and begins with the determination o

Radiation quantities, units and measurements. Final report 1999

International Nuclear Information System (INIS)

Wambersie, A.; Allisy, A.; Caswell, R.S.

2000-01-01

The determination of human exposure to radiation and radioactivity, whether arising from environmental exposures, medical practice or industrial activities, requires a fundamental set of quantities and units with which exposures can be specified and the means and ability to make measurements which yield results in terms of these quantities and units. Radiation protection then, as well as effective use of radiation in medical applications, requires the capability to accurately quantify the characteristics and extent of radiation exposure, so that appropriate and useful assessments of the potential health consequences and risks, whether for protection of the public and workers or for diagnosis and treatment of disease, can be formulated. The work carried out via this concerted action on ''Radiation quantities, units and measurements'' has addressed these needs. Measurement of radiation is a complex subject and is a science in itself. Yet many users of radiation who need to make radiation measurements cannot be expected to become experts in this particular field. They need authoritative guidance on how to deal with the measurement problems connected with their particular use of radiation. The work carried out pursuant to this concerted action has resulted in publications that meet this need. Important achievements include the publication of seven new ICRU reports, the completion of all but the printing of three other ICRU reports, completion of the drafting work on two other reports, the development of many others reports and the initiation of seven new activities that will result in ICRU reports representing important future contribution to the needs identified in this project. (orig.)

Enhancing Foreign Consumer Acceptance The Role of Capabilities of Creating Export-Market Oriented Products in Small and Medium-Sized Enterprises (SMEs

Directory of Open Access Journals (Sweden)

Firmanzah Firmanzah

2008-06-01

Full Text Available The main purpose of this paper is to measure the effects of SMEs capabilities on their export performance. This paper offers a model to test the effects of the capabilities of creating export-market oriented products (EMOPs on increasing SMEs’ export performance. Six hypotheses are developed to analyze causal effects of variables. Using 387 Indonesian SMEs as sample, hypotheses testing highlight the importance of SMEs’ capabilities of building export-market oriented products, which highly follow foreign (export market standards. Hence, these kinds of products increase foreign consumer acceptance. In general, this paper offers a possible explanation to predict the determinants of how SMEs’ can perform in the export market.

Evaluation of agricultural ecological environment in determining the capable areas: A case study of city of Esfahan, Iran

Directory of Open Access Journals (Sweden)

Sedigheh Kiani Salmi

2013-02-01

Full Text Available The nature of different activities in production, agriculture as well as distribution and consumption section, called as expansionist activities, largely influence the ability of the land. Production of consumable material, which is required for increasing population in various areas, and their attractions make it possible to earn more profit and it causes a significant pressure on soil and water resources and can threaten environmental pollution and human food security. A self-interested attitude on land resources has led to run short-term programs without considering the ecological capability of the land. These mentioned problems are, significantly intensified particularly in arid and semi-arid areas with severe limitations of water and soil quality and quantity. Therefore, land allocation based on ecological capability and self-purification indexes, used for land use planning, is an appropriate response to meet the deficiencies noted. This paper studies the agricultural capable lands based on land capability. The proposed study uses GIS software capabilities with application of the environmental ability evaluation model, as a holistic approach, to make sustainable development research in the region. The results indicate that suitable lands for agriculture in the whole area in different classes are widespread and with regards to dependency of more than 90 percent of people to agricultural activities, serious attention of authorities is required for providing the appropriate baseline and avoiding land use change to develop this activity.

Developing maturity grids for assessing organisational capabilities

DEFF Research Database (Denmark)

Maier, Anja; Moultrie, James; Clarkson, P John

2009-01-01

Keyword: Maturity Model,Maturity Grid,Maturity Matrix,Organisational Capabilities,Benchmarking,New Product Development,Perfirmance Assessment......Keyword: Maturity Model,Maturity Grid,Maturity Matrix,Organisational Capabilities,Benchmarking,New Product Development,Perfirmance Assessment...

Production of NDA Working Reference Materials for the Capability Evaluation Project

International Nuclear Information System (INIS)

Noll, P.D. Jr.; Marshall, R.S.

1998-01-01

The production of Non Destructive Assay (NDA) Working Reference Materials (WRMs) that are traceable to nationally recognized standards was undertaken to support implementation of the Idaho National Engineering and Environmental Laboratory (INEEL) Nondestructive Waste Assay Capability Evaluation Project (CEP). The WRMs produced for the CEP project consist of Increased Am/Pu mass ration (IAP) and depleted Uranium (DU) WRMs. The CEP IAP/DU WRM set provides radioactive material standards for use in combination with 55 gallon drum waste matrix surrogates for the assessment of waste NDA assay system performance. The Production of WRMs is a meticulous process that is not without certain trials and tribulations. Problems may arise at any of the various stages of WRM production which include, but are not limited to; material characterization (physical, chemical, and isotopic), material blend parameters, personnel radiation exposure, gas generation phenomenon, traceability to national standards, encapsulation, statistical evaluation of the data, and others. Presented here is an overall description of the process by which the CEP WRMs were produced and certified as well as discussions pertaining to some of the problems encountered and how they were solved

Bioethanol production potential from Brazilian biodiesel co-products

Energy Technology Data Exchange (ETDEWEB)

Visser, Evan Michael; Filho, Delly Oliveira; Martins, Marcio Aredes [Departamento de Engenharia Agricola, Universidade Federal de Vicosa, Campus Universitario 36570-000 Vicosa, MG (Brazil); Steward, Brian L. [Department of Agricultural and Biosystems Engineering, Iowa State University, 214D Davidson Hall, Ames, IA 50011 (United States)

2011-01-15

One major problem facing the commercial production of cellulosic ethanol is the challenge of economically harvesting and transporting sufficient amounts of biomass as a feedstock at biorefinery plant scales. Oil extraction for biodiesel production, however, yields large quantities of biomass co-products rich in cellulose, sugar and starch, which in many cases may be sufficient to produce enough ethanol to meet the alcohol demands of the transesterification process. Soybean, castor bean, Jatropha curcas, palm kernel, sunflower and cottonseed were studied to determine ethanol production potential from cellulose found in the oil extraction co-products and also their capacity to meet transesterification alcohol demands. All crops studied were capable of producing enough ethanol for biodiesel production and, in the case of cottonseed, 470% of the transesterification demand could be met with cellulosic ethanol production from oil extraction co-products. Based on Brazilian yields of the crops studied, palm biomass has the highest potential ethanol yield of 108 m{sup 3} km{sup -2} followed by J. curcas with 40 m{sup 3} km{sup -2}. A total of 3.5 hm{sup 3} could be produced from Brazilian soybean oil extraction co-products. (author)

Qualitative assessment of the fission product release capability of ELOCA.Mk5

International Nuclear Information System (INIS)

Klein, M.E.; Carlucci, L.N.; Arimescu, V.I.

1995-01-01

A qualitative assessment of the fission product release capability of the ELOCA.Mk5 computer code was performed by simulating two transients from the sweep-gas experiment, FIO-133. Improved agreement between calculated and experimental trends in release was obtained by applying an interface pressure stress component to the pellet center. As well, results show that the current system for defining the reference temperature distribution for the thermal stress component is not always realistic. These results are being used in the development of a new, mechanistic pellet stress model. (author)

Effects of DME pilot quantity on the performance of a DME PCCI-DI engine

International Nuclear Information System (INIS)

Wang Ying; He Li; Zhou Longbao; Li Wei

2010-01-01

The combination of premixed charge compression ignition and conventional direct-injection compression ignition combustion is studied in a DME engine. This combustion mode is referred to as PCCI-DI combustion. The pilot quantity is found to be one of main variables affecting the PCCI-DI combustion. So, the main objectives of this paper are to examine the effect of different DME pilot quantities on combustion and emission characteristics in a single-cylinder direct-injection DME engine and to determine whether PCCI-DI is a viable in-cylinder NO x emissions reduction technology. In order to evaluate the characteristics of PCCI-DI combustion, the conventional direct-injection compression-ignition engine performance is supplied to make a comparison with their results. Furthermore, special emphasis is put upon the combined combustion process analysis. Results show that DME engine can operate at a wide range of speeds and loads at PCCI-DI mode. In comparison to the conventional DME CI combustion, the brake thermal efficiency slightly increases for DME PCCI-DI operation. PCCI-DI is capable to decrease NO x effectively for all loads. NO x emission shows an obviously descending tendency with an increase in DME pilot quantity at low loads, while it shows a mildly elevating tendency with an increase in DME pilot quantity at high loads. HC and CO emissions increase for DME PCCI-DI operation under various DME pilot quantities.

Knowledge Management in Product Development Projects

International Nuclear Information System (INIS)

Sheik Muhamad, S.

2016-01-01

Full text: Product data management system (PDM) solutions control vast quantities of information generated by engineers during the product development process. They provide vaulting capabilities to control access to shared data,workflow to distribute it, and configured product structures to relate it to product components. Nuclear Malaysia has the desire to have a proper CAD management system and this is achieved with the use of PDM system to manage all their designs throughout the product lifecycle, i.e., for drawing distribution and design change. The type of documents that Nuclear Malaysia manages are CAD files (as generated by CATIA, AUTOCAD), engineering files, reports, project files, documents (WORD, PDF), spreadsheet (EXCEL), bills of material, manufacturing processes and drawings. Besides managing drawings, we also want to control and manage engineering changes (ECO & ECR) in electronic format. (author

How necessary are the new quantities

International Nuclear Information System (INIS)

Kraus, W.

1991-01-01

The necessity of the ICRU operational quantities is discussed from the point of view of practical, opertional radiation protection, on the basis of ICRU report 43. It is clear that, although the new quantities have some advantages over previous systems of operational quantities, there are some disadvantages as well. The decision to adopt these quantities is, therefore, not clear cut. (orig.)

Technological capability at the Brazilian official pharmaceutical laboratories

Directory of Open Access Journals (Sweden)

José Vitor Bomtempo Martins

2008-10-01

Full Text Available This paper studies the technological capability in the Brazilian Official Pharmaceutical Laboratories [OPL]. The technological capability analysis could contribute to organization strategies and governmental actions in order to improve OPL basic tasks as well to incorporate new ones, particularly concerning the innovation management. Inspired in Figueiredo (2000, 2003a, 2003b and Figueiredo and Ariffin (2003, a framework was drawn and adapted to pharmaceutical industry characteristics and current sanitary and health legislation. The framework allows to map different dimensions of the technological capability (installations, processes, products, equipments, organizational capability and knowledge management and the level attained by OPL (ordinary or innovating capability. OPL show a good development of ordinary capabilities, particularly in Product and Processes. Concerning the other dimensions, OPL are quite diverse. In general, innovating capabilities are not much developed. In the short term, it was identified a dispersion in the capacitating efforts. Considering their present level and the absorption efforts, good perspectives can be found in Installations, Processes and Organizational Capability. A lower level of efforts in Products and Knowledge Management could undermine these capabilities in the future.

Human-Centered Design Capability

Science.gov (United States)

Fitts, David J.; Howard, Robert

2009-01-01

For NASA, human-centered design (HCD) seeks opportunities to mitigate the challenges of living and working in space in order to enhance human productivity and well-being. Direct design participation during the development stage is difficult, however, during project formulation, a HCD approach can lead to better more cost-effective products. HCD can also help a program enter the development stage with a clear vision for product acquisition. HCD tools for clarifying design intent are listed. To infuse HCD into the spaceflight lifecycle the Space and Life Sciences Directorate developed the Habitability Design Center. The Center has collaborated successfully with program and project design teams and with JSC's Engineering Directorate. This presentation discusses HCD capabilities and depicts the Center's design examples and capabilities.

Analytical capabilities and services of Lawrence Livermore Laboratory's General Chemistry Division

International Nuclear Information System (INIS)

Gutmacher, R.; Crawford, R.

1978-01-01

This comprehensive guide to the analytical capabilities of Lawrence Livermore Laboratory's General Chemistry Division describes each analytical method in terms of its principle, field of application, and qualitative and quantitative uses. Also described are the state and quantity of sample required for analysis, processing time, available instrumentation, and responsible personnel

Supply Chain Coordination under Trade Credit and Quantity Discount with Sales Effort Effects

Directory of Open Access Journals (Sweden)

Zhihong Wang

2018-01-01

Full Text Available The purpose of this paper is to investigate the role of trade credit and quantity discount in supply chain coordination when the sales effort effect on market demand is considered. In this paper, we consider a two-echelon supply chain consisting of a single retailer ordering a single product from a single manufacturer. Market demand is stochastic and is influenced by retailer sales effort. We formulate an analytical model based on a single trade credit and find that the single trade credit cannot achieve the perfect coordination of the supply chain. Then, we develop a hybrid quantitative analytical model for supply chain coordination by coherently integrating incentives of trade credit and quantity discount with sales effort effects. The results demonstrate that, providing that the discount rate satisfies certain conditions, the proposed hybrid model combining trade credit and quantity discount will be able to effectively coordinate the supply chain by motivating retailers to exert their sales effort and increase product order quantity. Furthermore, the hybrid quantitative analytical model can provide great flexibility in coordinating the supply chain to achieve an optimal situation through the adjustment of relevant parameters to resolve conflict of interests from different supply chain members. Numerical examples are provided to demonstrate the effectiveness of the hybrid model.

A solution procedure for mixed-integer nonlinear programming formulation of supply chain planning with quantity discounts under demand uncertainty

Science.gov (United States)

Yin, Sisi; Nishi, Tatsushi

2014-11-01

Quantity discount policy is decision-making for trade-off prices between suppliers and manufacturers while production is changeable due to demand fluctuations in a real market. In this paper, quantity discount models which consider selection of contract suppliers, production quantity and inventory simultaneously are addressed. The supply chain planning problem with quantity discounts under demand uncertainty is formulated as a mixed-integer nonlinear programming problem (MINLP) with integral terms. We apply an outer-approximation method to solve MINLP problems. In order to improve the efficiency of the proposed method, the problem is reformulated as a stochastic model replacing the integral terms by using a normalisation technique. We present numerical examples to demonstrate the efficiency of the proposed method.

21 CFR 516.36 - Insufficient quantities of MUMS-designated drugs.

Science.gov (United States)

2010-04-01

... SERVICES (CONTINUED) ANIMAL DRUGS, FEEDS, AND RELATED PRODUCTS NEW ANIMAL DRUGS FOR MINOR USE AND MINOR SPECIES Designation of a Minor Use or Minor Species New Animal Drug § 516.36 Insufficient quantities of... the 7-year period of exclusive marketing rights. (b) If, within the time that FDA specifies, the...

27 CFR 24.242 - Authority to use greater quantities of decolorizing material in juice or wine.

Science.gov (United States)

2010-04-01

... quantities of decolorizing material in juice or wine. 24.242 Section 24.242 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Storage, Treatment and Finishing of Wine § 24.242 Authority to use greater quantities of decolorizing material in...

Radiation quantities and units

International Nuclear Information System (INIS)

1980-01-01

This report supersedes ICRU Report 19. Since ICRU Report 19 was published, a number of discussions have taken place between members of the Report Committee on Fundamental Quantities and Units and other workers in the field. Some of these discussions have resulted in the acceptance of certain modifications in the material set out in Report 19 and these modifications are incorporated in the current report. In addition, there has been some expansion and rearrangement of the material in the earlier report. In line, with providing more didactic material and useful source material for other ICRU reports, the general considerations in subsection 1.A of Report 19 have been expanded and placed in a separate subsection. The additional material includes discussions of four terms that are used in this document - quantity, unit, stochastic, and non-stochastic - along with a brief discussion of the mathematical formalism used in ICRU reports. As in ICRU Report 19, the definitions of quantities and units specifically designed for radiation protection (Part B) are separated from those of the general quantities (Part A). The inclusion of the index concept outlined in ICRU Report 25[4] required an extension of Part B

Facile, Large-Quantity Synthesis of Stable, Tunable-Color Silicon Nanoparticles and Their Application for Long-Term Cellular Imaging.

Science.gov (United States)

Zhong, Yiling; Sun, Xiaotian; Wang, Siyi; Peng, Fei; Bao, Feng; Su, Yuanyuan; Li, Youyong; Lee, Shuit-Tong; He, Yao

2015-06-23

We herein introduce a facile, low-cost photochemical method capable of rapid (nanoparticles (SiNPs) of tunable optical properties (peak emission wavelength in the range of 470-560 nm) under ambient air conditions, by introducing 1,8-naphthalimide as a reducing agent and surface ligands. The as-prepared SiNPs feature robust storage stability and photostability preserving strong and stable fluorescent during long-term (>3 h) high-power UV irradiation, in contrast to the rapid fluorescence quenching within 2 h of conventional organic dyes and II-VI quantum dots under the same conditions. The as-prepared SiNPs serving as photostable nanoprobes are workable for cellular imaging in long-term manners. Our findings provide a powerful method for mild-condition and low-cost, large-quantity production of highly fluorescent and photostable SiNPs for various promising applications.

Variations of influence quantities in industrial irradiators and their effect on dosimetry performance

International Nuclear Information System (INIS)

Chu, R.D.H.

1999-01-01

Many environmental factors, including irradiation temperature, post-irradiation storage temperature, dose rate, relative humidity, oxygen content and the energy spectrum may affect the response of dosimetry systems used in industrial radiation processing. Although the effects of individual influence quantities have been extensively studied, the variations of these influence quantities in production irradiators and the complex relationships between the effects of different influence quantities make it difficult to assess the overall effect on the measurement uncertainty. In the development of new dosimetry systems it is important to know the effect of each influence quantity and developers of new dosimetry systems should perform studies over a wide range of irradiation conditions. Analysis parameters and manufacturing specifications should be chosen to minimize the effect of influence quantities in the environments where the dosimeters will be used. Because of possible relationships between different influence quantities, care must be taken to ensure that the response function determined in the calibration of the dosimetry system is applicable for the conditions in which the dosimeters will be used. Reference standard dosimetry systems which have been thoroughly studied and have known relationships between dose response and influence quantities should be used to verify the calibration of routine dosimetry systems under the actual conditions of use. Better understanding of the variations in influence quantities in industrial irradiators may be obtained by modeling or direct measurements and may provide improvements in the calibration of routine dosimetry system and reduction of the overall measurement uncertainty. (author)

Savannah River release: test of the new ARAC capability

International Nuclear Information System (INIS)

Dickerson, M.H.

1977-01-01

Working jointly from opposite sides of the nation Lawrence Livermore Laboratory (LLL) and the Savannah River Laboratory (SRL) quickly assessed the consequences of an early-morning tritium release in May 1974 from the Savannah River Plant, in South Carolina. Measurements confirmed the accuracy of the LLL predictions. Due to the small quantity involved and to the release location (well within the plant confines), the release was not dangerous to the public. The emergency provided a dramatic test of procedures and capabilities of the new Atmospheric Release Advisory Capability (ARAC) center at Livermore, which was not yet operational, demonstrating the capacity for quick response, and the feasibility of real-time data acquisition and transmittal across the continent

Are necessary unmeasurable quantities in radiation protection?

International Nuclear Information System (INIS)

David, M.G.; Correa, M.F.; Videira, A.A.P.

2016-01-01

We discuss in this paper the metrological status of unmeasurable protection quantities and the need to maintain these kind of quantities in the system. The discussion is based on reports from the institutions responsible for the quantities and on scientific publications. In conclusion, we can say that there are alternatives for changing the system in a way that it keep just measurable quantities, nevertheless the present system is well assimilated. Even though a proposal yet to be presented for changing the system, although might simplify and improve it, is not intended to overcome the existence of unmeasurable quantities or the two kinds of quantities. (author)

Routine production of 18F using 16.5 MeV cyclotron for synthesis of 2-(18F)fluro-2-deoxy-d-glucose (FDG)

International Nuclear Information System (INIS)

Abd Jalil Abd Hamid; Soni, P.S.; Rajan, M.G.R.

2006-01-01

A medium energy cyclotron with maximum of 75 mA beam current is capable of producing most common Positron Emission Tomography (PET) radionuclides in sufficient quantities. The cyclotron has two targets for production of Flourine-18. One is high yield target system (HYT) (1.2 mL) and the other is HYT Generation II (Gen-II) (2.2 mL) and capable of producing 110 and 170 GBq respectively. Enriched 18 O water (>95%) is used for the routine production of Flourine-18 using the 18 O(p,n) 18 F nuclear reaction and irradiated under helium gas pressurized at 59-65 kPa at a beam current of 35 mA - 55 mA for 20-67 minutes. The [ 18 F]fluoride ion produced are used for the synthesis of 2-fluoro-2-deoxy-D-glucose (2-[ 18 F]FDG). Various factors that may effect the production of PET radionuclides and one such factor includes the silver target body often introduce impurity such as silver oxides in form of black particles that can impede the (ID 0.75 mm) delivery line. Such contaminants would reduce the quantity of the available useful radioisotopes, and hinder the subsequent radiopharmaceutical processes. Used of HYT and HYT Gen-II for the routine production of 18 F- in few ten GBq quantities were reported

Antimatter Production for Near-Term Propulsion Applications

Science.gov (United States)

Gerrish, Harold P.; Schmidt, George R.

1999-01-01

This presentation discusses the use and potential of power generated from Proton-Antiproton Annihilation. The problem is that there is not enough production of anti-protons, and that the production methods are inefficient. The cost for 1 gram of antiprotons is estimated at 62.5 trillion dollars. Applications which require large quantities (i.e., about 1 kg) will require dramatic improvements in the efficiency of the production of the antiprotons. However, applications which involve small quantities (i.e., 1 to 10 micrograms may be practical with a relative expansion of capacities. There are four "conventional" antimatter propulsion concepts which are: (1) the solid core, (2) the gas core, (3) the plasma core, and the (4) beam core. These are compared in terms of specific impulse, propulsive energy utilization and vehicle structure/propellant mass ratio. Antimatter-catalyzed fusion propulsion is also evaluated. The improvements outlined in the presentation to the Fermilab production, and other sites. capability would result in worldwide capacity of several micrograms per year, by the middle of the next decade. The conclusions drawn are: (1) the Conventional antimatter propulsion IS not practical due to large p-bar requirement; (2) Antimatter-catalyzed systems can be reasonably considered this "solves" energy cost problem by employing substantially smaller quantities; (3) With current infrastructure, cost for 1 microgram of p-bars is $62.5 million, but with near-term improvements cost should drop; (4) Milligram-scale facility would require a $15 billion investment, but could produce 1 mg, at $0.1/kW-hr, for $6.25 million.

Quantity and/or Quality? The Importance of Publishing Many Papers

Science.gov (United States)

van den Besselaar, Peter

2016-01-01

Do highly productive researchers have significantly higher probability to produce top cited papers? Or do high productive researchers mainly produce a sea of irrelevant papers—in other words do we find a diminishing marginal result from productivity? The answer on these questions is important, as it may help to answer the question of whether the increased competition and increased use of indicators for research evaluation and accountability focus has perverse effects or not. We use a Swedish author disambiguated dataset consisting of 48.000 researchers and their WoS-publications during the period of 2008–2011 with citations until 2014 to investigate the relation between productivity and production of highly cited papers. As the analysis shows, quantity does make a difference. PMID:27870854

A Summary of Actinide Enrichment Technologies and Capability Gaps

Energy Technology Data Exchange (ETDEWEB)

Patton, Bradley D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Robinson, Sharon M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-01-01

The evaluation performed in this study indicates that a new program is needed to efficiently provide a national actinide radioisotope enrichment capability to produce milligram-to-gram quantities of unique materials for user communities. This program should leverage past actinide enrichment, the recent advances in stable isotope enrichment, and assessments of the future requirements to cost effectively develop this capability while establishing an experience base for a new generation of researchers in this vital area. Preliminary evaluations indicate that an electromagnetic isotope separation (EMIS) device would have the capability to meet the future needs of the user community for enriched actinides. The EMIS technology could be potentially coupled with other enrichment technologies, such as irradiation, as pre-enrichment and/or post-enrichment systems to increase the throughput, reduce losses of material, and/or reduce operational costs of the base EMIS system. Past actinide enrichment experience and advances in the EMIS technology applied in stable isotope separations should be leveraged with this new evaluation information to assist in the establishment of a domestic actinide radioisotope enrichment capability.

Monitoring and Evaluation of Cultivated Land Irrigation Guarantee Capability with Remote Sensing

Science.gov (United States)

Zhang, C., Sr.; Huang, J.; Li, L.; Wang, H.; Zhu, D.

2015-12-01

Abstract: Cultivated Land Quality Grade monitoring and evaluation is an important way to improve the land production capability and ensure the country food safety. Irrigation guarantee capability is one of important aspects in the cultivated land quality monitoring and evaluation. In the current cultivated land quality monitoring processing based on field survey, the irrigation rate need much human resources investment in long investigation process. This study choses Beijing-Tianjin-Hebei as study region, taking the 1 km × 1 km grid size of cultivated land unit with a winter wheat-summer maize double cropping system as study object. A new irrigation capacity evaluation index based on the ratio of the annual irrigation requirement retrieved from MODIS data and the actual quantity of irrigation was proposed. With the years of monitoring results the irrigation guarantee capability of study area was evaluated comprehensively. The change trend of the irrigation guarantee capability index (IGCI) with the agricultural drought disaster area in rural statistical yearbook of Beijing-Tianjin-Hebei area was generally consistent. The average of IGCI value, the probability of irrigation-guaranteed year and the weighted average which controlled by the irrigation demand index were used and compared in this paper. The experiment results indicate that the classification result from the present method was close to that from irrigation probability in the gradation on agriculture land quality in 2012, with overlap of 73% similar units. The method of monitoring and evaluation of cultivated land IGCI proposed in this paper has a potential in cultivated land quality level monitoring and evaluation in China. Key words: remote sensing, evapotranspiration, MODIS cultivated land quality, irrigation guarantee capability Authors: Chao Zhang, Jianxi Huang, Li Li, Hongshuo Wang, Dehai Zhu China Agricultural University zhangchaobj@gmail.com

Thermal quantities of 46Ti

International Nuclear Information System (INIS)

Rahmatinejad, A.; Razavi, R.; Kakavand, T.

2015-01-01

Thermodynamic quantities of 46 Ti have been calculated in the framework of the BCS model with inclusion of modified nuclear pairing gap (MPBCS) that was proposed in our previous publication. Using modified paring gap results in an S-shaped heat capacity curve at critical temperature with a smooth behavior instead of singular behavior of the same curve in the BCS calculations. In addition the thermal quantities have been extracted within the framework of a canonical ensemble according to the new experimental data on nuclear level densities measured by the Oslo group. Comparison shows a good agreement between our calculations in MPBCS and the extracted quantities in the canonical ensemble framework

Methods, Devices and Computer Program Products Providing for Establishing a Model for Emulating a Physical Quantity Which Depends on at Least One Input Parameter, and Use Thereof

DEFF Research Database (Denmark)

2014-01-01

The present invention proposes methods, devices and computer program products. To this extent, there is defined a set X including N distinct parameter values x_i for at least one input parameter x, N being an integer greater than or equal to 1, first measured the physical quantity Pm1 for each...

Capabilities, innovation, and overall performance in Brazilian export firms.

Directory of Open Access Journals (Sweden)

José Ednilson de Oliveira Cabral

2015-06-01

Full Text Available This article extends the current research on innovation by investigating the relationship between innovative capabilities and export firms’ overall performance. From the perspectives of the resource-based view (RBV and dynamic capability, we examine the differential and interactive effects of exploration and exploitation capabilities in product innovation for external markets and overall performance (direct and mediated by a new product. In addition, we test the moderating effect of market dynamism and the controlling effect of firm size on these relationships. Hence, the main contribution of this article is developing and empirically testing an original model, by combining these constructs that address new relationships, in an emerging country. This model was tested with data from 498 Brazilian export firms, distributed throughout all Brazilian manufacturing sectors, by firm size, and in states. The analysis was made with application of the structural equation modeling (SEM. As a result, we found support for the assumptions that exploitation capabilities influence product innovation and overall performance, whereas exploration capabilities and their interaction to exploitation capabilities influence overall performance, but not product innovation. Additionally, the relationship between exploitation capabilities and overall performance is mediated by product innovation. Unlike hypothesized, market dynamism does not moderate the relationship between product innovation and overall performance. Furthermore, firm size works as a controlling variable in the relationships analyzed. Regarding the implications for theory, this study contributes to grasp that exploitation capabilities influences a firm’s overall performance, both directly and indirectly (via product innovation, and highlights the various direct and mediatory effects of innovation on overall performance. These insights show the importance of considering the role of mediating and

Quantities for environmental monitoring

International Nuclear Information System (INIS)

1989-01-01

It is recommended that if measurements are made with the objective of monitor radiation levels in the environment to elucidate long-term changes in these levels, then air kerma should be used. If the objective is to give an indication that levels from man-made sources are acceptable within specified limits for the exposure of people, then ambient dose equivalent should be used. It should be noted that radiation risks to individuals are best expressed by the quantity effective dose equivalent. If this latter quantity is to be accurately assessed, it may be necessary to obtain details of the quality of the environmental radiation that cannot be described adequately by simple measurements of either air kerma or ambient dose equivalent. If the above objectives pertain, the measurements should record both air kerma and ambient dose equivalent. If neutrons are measured in the environment then ambient dose equivalent is the appropriate quantity for both the above objectives. (author)

Degradation and metabolism of synthetic plastics and associated products by Pseudomonas sp.: capabilities and challenges.

Science.gov (United States)

Wilkes, R A; Aristilde, L

2017-09-01

Synthetic plastics, which are widely present in materials of everyday use, are ubiquitous and slowly-degrading polymers in environmental wastes. Of special interest are the capabilities of microorganisms to accelerate their degradation. Members of the metabolically diverse genus Pseudomonas are of particular interest due to their capabilities to degrade and metabolize synthetic plastics. Pseudomonas species isolated from environmental matrices have been identified to degrade polyethylene, polypropylene, polyvinyl chloride, polystyrene, polyurethane, polyethylene terephthalate, polyethylene succinate, polyethylene glycol and polyvinyl alcohol at varying degrees of efficiency. Here, we present a review of the current knowledge on the factors that control the ability of Pseudomonas sp. to process these different plastic polymers and their by-products. These factors include cell surface attachment within biofilms, catalytic enzymes involved in oxidation or hydrolysis of the plastic polymer, metabolic pathways responsible for uptake and assimilation of plastic fragments and chemical factors that are advantageous or inhibitory to the biodegradation process. We also highlight future research directions required in order to harness fully the capabilities of Pseudomonas sp. in bioremediation strategies towards eliminating plastic wastes. © 2017 The Society for Applied Microbiology.

Method and means for determining heat quantities

Energy Technology Data Exchange (ETDEWEB)

Waasdorp, G G; de Jong, J J; Bijl, A

1965-08-24

To determine the quantity of potential heat W that has flowed past a certain point in a certain time, the velocity of the combustible Q, the temperature T, and the specific gravity YDTU are measured, and these values are transmitted to a computer which automatically calculates the quantity: ..pi..EQUATION/sup -/ in which delta T is the difference between the combustible temperature T and a reference temperature, and in which the relation f(YDTU, delta T) represents the heat of combustion as a function of the quantities YDTU and delta T and possibly other properties of the combustible. Alternatively the quantity: ..pi..EQUATION/sup -/ may be measured; here the quantities have the same meaning as above.

Influence of Intuition and Capability on Accelerated Product Development in Big-Medium Scaled Food Companies in Indonesia

Directory of Open Access Journals (Sweden)

Pepey Riawati Kurnia

2013-06-01

Full Text Available To face the pressure of competition, more and more companies perform accelerated product development by shortening the product development time so that the product will arrive at the market at the shortest time. Food industry has also performed accelerated product development. Using evolution theory, contingency theory, market-based view, and resource-based view a research model has been built. Results of the research’s initial identification show that food industry in Indonesia is in growth level towards maturity level. Meanwhile, competition in the food industry is in moderate level towards hypercompetition level. Tactics of accelerated product development often carried out is by simplifying the product development steps to eliminating the product development steps. The innovation type used is incremental innovation since it is fast and easy. Results of the research give information that intuition and capabilities are the main motivating factors for big-medium scaled food companies in Indonesia to accelerate product development.

A Viewpoint on the Quantity "Plane Angle"

Science.gov (United States)

Eder, W. E.

1982-01-01

Properties of the quantity "plane angle" are explored under the hypothesis that it is a dimensional quantity. The exploration proceeds especially with respect to the physical concept, its mathematical treatment, vector concepts, measurement theory, units of related quantities, engineering pragmatism, and SI. An attempt is made to bring these different relations into a rational, logical and consistent framework, and thus to justify the hypothesis. Various types of vectorial quantities are recognized, and their properties described with an outline of the necessary algebraic manipulations. The concept of plane angle is amplified, and its interdependence with the circular arc is explored. The resulting units of plane angle form a class of similar scales of measurement. Consequences of the confirmed hypothesis are developed for mathematical expressions involving trigonometric functions, rotational volumes and areas, mathematical limits, differentiation and series expansion. Consequences for mechanical rotational quantities are developed, with proposals for revisions to a number of expressions for derived units within SI. A revised definition for the quantity "plane angle" is stated to take account of the developed insights. There is a clear need to reconsider the status of plane angle and some other quantities within the international framework of SI.

Emission sources and quantities

International Nuclear Information System (INIS)

Heinen, B.

1991-01-01

The paper examines emission sources and quantities for SO 2 and NO x . Natural SO 2 is released from volcanic sources and to a much lower extent from marsh gases. In nature NO x is mainly produced in the course of the chemical and bacterial denitrification processes going on in the soil. Manmade pollutants are produced in combustion processes. The paper concentrates on manmade pollution. Aspects discussed include: mechanism of pollution development; manmade emission sources (e.g. industry, traffic, power plants and domestic sources); and emission quantities and forecasts. 11 refs., 2 figs., 5 tabs

CAPABILITY ASSESSMENT OF MEASURING EQUIPMENT USING STATISTIC METHOD

Directory of Open Access Journals (Sweden)

Pavel POLÁK

2014-10-01

Full Text Available Capability assessment of the measurement device is one of the methods of process quality control. Only in case the measurement device is capable, the capability of the measurement and consequently production process can be assessed. This paper deals with assessment of the capability of the measuring device using indices Cg and Cgk.

Effect of Grazing on Forage Quality and Quantity for Ungulates of ...

African Journals Online (AJOL)

This study examined the effect of grazing as simulated by clipping on forage quality and quantity in terms of above ground biomass, live, total production and nutrients content of forages utilized by ungulates of Kainji Lake National Park. Three 2.5m by 2.5m plots were constructed in the three main vegetation communities in ...

Evaluation of plasma arc welding capabilities and applications

International Nuclear Information System (INIS)

Mills, G.S.

1978-01-01

Unique capabilities of plasma arc welding in the keyhole mode are described, and the potential applicability of these capabilities to Rocky Flats production needs are evaluated. For the areas of potential benefits studied, the benefits of this welding technique either did not materialize or the complication of implementing the process in production was not warranted by the demonstrated benefits

Method of Converting Wheat Flour Quantity into Rice Flour Quantity in Cookies (Part-1)

OpenAIRE

村田,美穂子; 髙橋,由加

2016-01-01

A method of converting the wheat flour quantity of a recipe of wheat-flour cookies into the rice flour quantity of a recipe of rice-flour cookies used domestically for wheat-allergic children was studied. The proportion of the water content with respect to the flour content (the wheat or rice flour content) in cut cookies prepared according to a commercially available recipe was obtained. Next, four types of rice-flour cookies were prepared according to a recipe for wheat-flour cookies using ...

Critical review of the current radiation protection quantities and units

International Nuclear Information System (INIS)

Sabol, J.

1998-01-01

Examples exist in dosimetry and radiation protection where primary attention was focused on the unit rather than the corresponding quantity. Another difficulty arises from the fact that quantities in this field cannot be considered as pure physical quantities, they are rather biophysical quantities. There are too many quantities (e. g. 17 quantities based on the dose equivalent), with differences in numerical values of 'similar' quantities, not always satisfactory approximations of virtually unmeasurable quantities by measurable quantities, inconsistency in definitions and interpretations of quantities of some international expert bodies, and problems of weighting and conversion factors. (M.D.)

The new operational quantities for radiation protection

International Nuclear Information System (INIS)

Kellerer, A.M.

1985-01-01

Philosophies and quantities for radiation protection have often been subjected to changes, and some of the developments are traced which ultimately led to recent proposals by ICRU. Development in the past has largely been towards clarification and generalisation of definitions. The present changes, however, reflect a more fundamental issue, the transition from the limitation system to the assessment system in radiation protection. The index quantities were suitable tools to ascertain compliance with the limitation system of radiation protection. The new quantities proposed by ICRU are suitable estimators for effective dose equivalent, which is an essential quantity in the assessment system of radiation protection. A synopsis of the definitions is given. (author)

Technology support for military capability based acquisition

CSIR Research Space (South Africa)

Thaba, Mphahlela

2017-05-01

Full Text Available gap between capability planning and acquisition of product systems in the SANDF. (Thaba J et al, 2015). The need for decision support tools and technologies to assist capability planners to close this gap and make sound decisions has become more...

OMPS Near Real-time Products Available Through NASA LANCE (Land Atmosphere Near Real-time Capability for EOS)

Science.gov (United States)

Warnock, A.; Durbin, P. B.; Cechini, M. F.; Masuoka, E.

2017-12-01

Near real-time (NRT) images from the NASA Ozone Mapping and Profiler Suite (OMPS) for sulfur dioxide, total column ozone and aerosol index products are now available through NASA's online Land Atmosphere Near real-time Capability for EOS (LANCE) system. Color palettes, image dimensions and data ranges have been aligned with the corresponding OMI products, allowing for direct comparison of OMPS NRT images with OMI NRT images already available in NASA Worldview. The images are delivered to LANCE within hours of satellite observation. LANCE NRT imagery can be interactively viewed through Worldview and the Global Imagery Browse Services (GIBS).

Estimating grass nutrients and biomass as an indicator of rangeland (forage) quality and quantity using remote sensing in Savanna ecosystems

CSIR Research Space (South Africa)

Ramoelo, Abel

2012-10-01

Full Text Available and grass quantity, respectively. The objective of the study is to estimate and map leaf N and biomass as an indicator of rangeland quality and quantity using vegetation indices derived from one RapidEye image taken at peak productivity. The study...

Investigation on prediction capability of nuclear design parameters for gap configuration in ITER through analysis of the FNS gap streaming experiment

International Nuclear Information System (INIS)

Maekawa, Fujio; Konno, Chikara; Kasugai, Yoshimi; Oyama, Yukio; Uno, Yoshitomo; Maekawa, Hiroshi; Ikeda, Yujiro

2000-01-01

As an R and D Task of shielding neutronics experiment under the Engineering Design Activities of the International Thermonuclear Experimental Reactor (ITER), streaming experiments with simulating a gap configuration formed by two neighboring blanket modules of ITER were carried out at the FNS (Fusion Neutron Source) facility. In this work, prediction capability of various nuclear design parameters was investigated through analysis of the experiments. The Monte Carlo transport calculation code MCNP-4A and the FENDL/E-1.0 and JENDL Fusion File cross section data libraries were used for the analysis with detailed modeling of the experimental conditions. As a result, all the measured quantities were reproduced within about ±30% by the calculations. It was concluded that these calculation tools were capable of predicting nuclear design parameters, such as helium production rates at connection legs of blanket modules to the back plate and nuclear responses in toroidal field coils, with uncertainty of ±30% for the geometry where gap-streaming effect was significant. (author)

Resposta produtiva de reprodutoras pesadas recriadas com diferentes quantidades de ração Productive results of broiler breeders hens that during the growing period received differents quantities of feed

Directory of Open Access Journals (Sweden)

José Antônio Budel

1996-12-01

Full Text Available Na área de produção animal, mais especificamente no caso de matrizes avícolas tipo corte, tem sido dada atenção especial ao melhoramento genético das mesmas. Recomendações quanto ao manejo geral das aves não tem tido a mesma evolução. Existem dúvidas quanto a quantidade ideal de ração a ser fornecida por ave/dia, principalmente durante a recria, para que ela tenha um desenvolvimento corporal adequado e, conseqüentemente, expresse ao máximo o seu potencial produtivo. Este experimento foi conduzido com o objetivo de avaliar parâmetros produtivos de matrizes de corte recriadas com diferentes quantidades de ração. Da 5ª a 20ª semana as aves foram alimentadas com 15% a menos de ração do que recomenda o manual da linhagem (ARBOR ACRES, 1992; T1, 10% a menos (T2, a quantidade padrão (T3 e 10% a mais de ração sobre a quantidade padrão (T4. Os resultados mostram que o peso corporal das aves é diretamente afetado (P0,05 que as mais leves (T1 e T2, sendo que estas por sua vez, produziram maior número de ovos incubáveis (PIn animal production, particularly in the área of broiler breeders, special attention has been given to the genetic improvement of these birds. General management practices of these birds have not suffered the same development. There are doubts in relation to the ideal quantity of feed to be offered per bird/day, particularly during the growing period, só that the bird may have an adequate corporal development and expresses to the maximum all of the productive potential. This experiment was conducted in order to analyse production parameters of broiler breeders grown with varying quantities of feed. From the 5th to the 20th week of age the birds were fed 15% less ration than that recommended by the breed manual (ARBOR ACRES, 1992; T1, 10% less (T2 the quantity recommended (T3 and 10% more than the recommended quantity. The results show that the body weight of the birds is directly affected by the quantity

Conceptual Model of Quantities, Units, Dimensions, and Values

Science.gov (United States)

Rouquette, Nicolas F.; DeKoenig, Hans-Peter; Burkhart, Roger; Espinoza, Huascar

2011-01-01

JPL collaborated with experts from industry and other organizations to develop a conceptual model of quantities, units, dimensions, and values based on the current work of the ISO 80000 committee revising the International System of Units & Quantities based on the International Vocabulary of Metrology (VIM). By providing support for ISO 80000 in SysML via the International Vocabulary of Metrology (VIM), this conceptual model provides, for the first time, a standard-based approach for addressing issues of unit coherence and dimensional analysis into the practice of systems engineering with SysML-based tools. This conceptual model provides support for two kinds of analyses specified in the International Vocabulary of Metrology (VIM): coherence of units as well as of systems of units, and dimension analysis of systems of quantities. To provide a solid and stable foundation, the model for defining quantities, units, dimensions, and values in SysML is explicitly based on the concepts defined in VIM. At the same time, the model library is designed in such a way that extensions to the ISQ (International System of Quantities) and SI Units (Systeme International d Unites) can be represented, as well as any alternative systems of quantities and units. The model library can be used to support SysML user models in various ways. A simple approach is to define and document libraries of reusable systems of units and quantities for reuse across multiple projects, and to link units and quantity kinds from these libraries to Unit and QuantityKind stereotypes defined in SysML user models.

Return handling options and order quantities for single period products

NARCIS (Netherlands)

D. Vlachos (Dimitrios); R. Dekker (Rommert)

2000-01-01

textabstractProducts which are sold through E-commerce or mail sales catalogues tend to have a much higher return rate than traditional products. The returns are especially problematic for seasonal products. To support decision making in these situations we study various options, which may be

Concept of ICRU's operational quantity and its application

International Nuclear Information System (INIS)

Murakami, Hiroyuki

1995-01-01

The operational quantity which was introduced in the ICRU report 39 published in 1985 was shocking rather than fresh for the author. The report was translated into Japanese, but at the beginning, the contents were not able to be understood. Thereafter, the measurement of ICRU sphere dose equivalent was introduced in a national law. But it is feared that the understanding of this operational quantity is limited to specialist level, and is not by men of practical works. The meaning of ''operational'' must be that workers measure and obtain dose on the spot for the radiation protection for themselves. The principles used when ICRU considered the new practical measured quantity are shown. In the definition of operational quantity in area monitoring, two concepts of expanded and aligned connect real measurement with the operational quantity. The problems of measuring individual dose equivalent are discussed. As to the reality of applying the operational quantity, the fundamentals of the calibration of measuring instruments, the investigation of the operational quantity in relation to measuring instruments and measurement mode, and the relation of area monitoring and individual monitoring are described. (K.I.)

Quantifying cannabis: A field study of marijuana quantity estimation.

Science.gov (United States)

Prince, Mark A; Conner, Bradley T; Pearson, Matthew R

2018-05-17

The assessment of marijuana use quantity poses unique challenges. These challenges have limited research efforts on quantity assessments. However, quantity estimates are critical to detecting associations between marijuana use and outcomes. We examined accuracy of marijuana users' estimations of quantities of marijuana they prepared to ingest and predictors of both how much was prepared for a single dose and the degree of (in)accuracy of participants' estimates. We recruited a sample of 128 regular-to-heavy marijuana users for a field study wherein they prepared and estimated quantities of marijuana flower in a joint or a bowl as well as marijuana concentrate using a dab tool. The vast majority of participants overestimated the quantity of marijuana that they used in their preparations. We failed to find robust predictors of estimation accuracy. Self-reported quantity estimates are inaccurate, which has implications for studying the link between quantity and marijuana use outcomes. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Influence of quantities of brewer yeast on the performance of Anastrepha obliqua wild females (Diptera, Tephritidae

Directory of Open Access Journals (Sweden)

Cresoni-Pereira Carla

2001-01-01

Full Text Available Using artificial solid diets, experiments were performed with Anastrepha obliqua (Macquart, 1835 wild females in order to verify the influence of different quantities of brewer yeast on the performance and compensation behavior to unbalanced diets ingestion. The observed parameters were egg production, ingestion, diet efficiency and survival in the reproductive phase. Results indicated that there was no compensatory ingestion to different quantities of yeast and that the diet with 12.5g of yeast provided the best performance. The absence of compensatory ingestion is discussed based on the yeast phagostimulation and on the costs involved in solid diets ingestion. The relation between the analyzed parameters and the protein quantities in the diet were discussed.

Influence of quantities of brewer yeast on the performance of Anastrepha obliqua wild females (Diptera, Tephritidae)

International Nuclear Information System (INIS)

Cresoni-Pereira, Carla; Zucoloto, Fernando Sergio

2001-01-01

Using artificial solid diets, experiments were performed with Anastrepha obliqua (Macquart, 1835) wild females in order to verify the influence of different quantities of brewer yeast on the performance and compensation behavior to unbalanced diets ingestion. The observed parameters were egg production, ingestion, diet efficiency and survival in the reproductive phase. Results indicated that there was no compensatory ingestion to different quantities of yeast and that the diet with 12.5g of yeast provided the best performance. The absence of compensatory ingestion is discussed based on the yeast phagostimulation and on the costs involved in solid diets ingestion. The relation between the analyzed parameters and the protein quantities in the diet were discussed. (author)

Influence of quantities of brewer yeast on the performance of Anastrepha obliqua wild females (Diptera, Tephritidae)

Energy Technology Data Exchange (ETDEWEB)

Cresoni-Pereira, Carla; Zucoloto, Fernando Sergio [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Filosofia, Ciencias e Letras. Dept. de Biologia

2001-11-15

Using artificial solid diets, experiments were performed with Anastrepha obliqua (Macquart, 1835) wild females in order to verify the influence of different quantities of brewer yeast on the performance and compensation behavior to unbalanced diets ingestion. The observed parameters were egg production, ingestion, diet efficiency and survival in the reproductive phase. Results indicated that there was no compensatory ingestion to different quantities of yeast and that the diet with 12.5g of yeast provided the best performance. The absence of compensatory ingestion is discussed based on the yeast phagostimulation and on the costs involved in solid diets ingestion. The relation between the analyzed parameters and the protein quantities in the diet were discussed. (author)

30 CFR 75.325 - Air quantity.

Science.gov (United States)

2010-07-01

... the exposure of miners. (i) A ventilating air quantity that is less than what is required by paragraph... results of sampling that demonstrate that the lesser air quantity will maintain continuous compliance with applicable TLV ®'s. (j) If during sampling required by § 70.1900(c) of this subchapter the ventilating air is...

Dose rate constants for new dose quantities

International Nuclear Information System (INIS)

Tschurlovits, M.; Daverda, G.; Leitner, A.

1992-01-01

Conceptual changes and new quantities made is necessary to reassess dose rate quantities. Calculations of the dose rate constant were done for air kerma, ambient dose equivalent and directional dose equivalent. The number of radionuclides is more than 200. The threshold energy is selected as 20 keV for the dose equivalent constants. The dose rate constant for the photon equivalent dose as used mainly in German speaking countries as a temporary quantity is also included. (Author)

Metrology Measurement Capabilities

Energy Technology Data Exchange (ETDEWEB)

Dr. Glen E. Gronniger

2007-10-02

This document contains descriptions of Federal Manufacturing & Technologies (FM&T) Metrology capabilities, traceability flow charts, and the measurement uncertainty of each measurement capability. Metrology provides NIST traceable precision measurements or equipment calibration for a wide variety of parameters, ranges, and state-of-the-art uncertainties. Metrology laboratories conform to the requirements of the Department of Energy Development and Production Manual Chapter 13.2, ANSI/ISO/IEC ANSI/ISO/IEC 17025:2005, and ANSI/NCSL Z540-1. FM&T Metrology laboratories are accredited by NVLAP for the parameters, ranges, and uncertainties listed in the specific scope of accreditation under NVLAP Lab code 200108-0. See the Internet at http://ts.nist.gov/Standards/scopes/2001080.pdf. These parameters are summarized. The Honeywell Federal Manufacturing & Technologies (FM&T) Metrology Department has developed measurement technology and calibration capability in four major fields of measurement: (1) Mechanical; (2) Environmental, Gas, Liquid; (3) Electrical (DC, AC, RF/Microwave); and (4) Optical and Radiation. Metrology Engineering provides the expertise to develop measurement capabilities for virtually any type of measurement in the fields listed above. A strong audit function has been developed to provide a means to evaluate the calibration programs of our suppliers and internal calibration organizations. Evaluation includes measurement audits and technical surveys.

Cross-language similarity and difference in quantity categorization of Finnish and Japanese

DEFF Research Database (Denmark)

Yoshida, Kenji; J de Jong, Kenneth; Kruschke, John K

2015-01-01

quantity categorization was conducted with 22 Finnish and 20 Japanese listeners, using natural speech stimuli with systematically manipulated closure durations. Stimuli were created from Finnish and Japanese productions of both long and short plosives. In the naturally produced stimuli, the duration...... to be language specific, and such durational differences may interfere with categorization in an unfamiliar language....

Building Server Capabilities

DEFF Research Database (Denmark)

Adeyemi, Oluseyi

2013-01-01

Many western companies have moved part of their operations to China in order to take advantage of cheap resources and/or to gain access to a high potential market. Depending on motive, offshore facilities usually start either as “sales-only” of products exported by headquarters or “production......-only”, exporting parts and components back to headquarter for sales in the home country. In the course of time, the role of offshore subsidiaries in a company’s operations network tends to change and, with that, the capabilities, of the subsidiaries. Focusing on Danish subsidiaries in China, the objective...

Building server capabilities

DEFF Research Database (Denmark)

Adeyemi, Oluseyi

Many western companies have moved part of their operations to China in order to take advantage of cheap resources and/or to gain access to a high potential market. Depending on motive, offshore facilities usually start either as “sales-only” of products exported by headquarters or “production......-only”, exporting parts and components back to headquarter for sales in the home country. In the course of time, the role of offshore subsidiaries in a company’s operations network tends to change and, with that, the capabilities, of the subsidiaries. Focusing on Danish subsidiaries in China, the objective...

7 CFR 61.102 - Determination of quantity index.

Science.gov (United States)

2010-01-01

... the quantity index shall equal four times percentage of oil plus six times percentage of ammonia, plus 5. (b) For American Pima cottonseed the quantity index shall equal four times percentage of oil... 7 Agriculture 3 2010-01-01 2010-01-01 false Determination of quantity index. 61.102 Section 61.102...

The Quantity and Quality of Illegally Imported Products of Animal Origin in Personal Consignments into the European Union Seized at Two German Airports between 2010 And 2014.

Directory of Open Access Journals (Sweden)

Wiebke Jansen

Full Text Available The import of products of animal origin (POAO in travellers' personal consignments presents a considerable risk of introducing animal diseases and emerging zoonoses into the European Union. The current regulation (EU 206/2009 implements strict measures for illegally imported POAO, whereupon non-complying products have to be seized and destroyed regardless. Especially airports serve as global bottlenecks for illegally imported POAO where passenger controls of non-European flights are performed by customs and veterinary services in collaboration. Results of these control measures have to be submitted in the form of annual reports to the European Commission. However, few data on qualities and quantities of seizures have been published so far. In this study, POAO seized at two German airports between 2010 and 2014 were analysed in terms of quantities, qualitative categories and region of origin. In most years considered, more than 20 tonnes POAO were seized at each airport. However, reported amounts of seizures seem to be only the tip of the iceberg as an all-passenger control is not feasible and therefore travellers are only spot-checked. The analysis suggests that the organisational structures of both customs and official veterinary services and their different risk perceptions interfere in completing an effective ban on the illegal import of POAO.

Production, innovation and service capabilities

DEFF Research Database (Denmark)

Slepniov, Dmitrij; Wæhrens, Brian Vejrum; Wu, Dong

2012-01-01

crossing both national and organisational borders emerge. The challenge of coordination in these configurations is an imperative which has not been adequately addressed so far. Therefore, by using explorative cases of Chinese and Danish companies, this paper seeks to develop a conceptual framework relating...... functional nodes of global production networks and devising appropriate coordination mechanisms between them....

The production and recovery of 77Br at Los Alamos for nuclear medicine studies

International Nuclear Information System (INIS)

Grant, P.M.; Whipple, R.E.; Barnes, J.W.; Bentley, G.E.; Wanek, P.M.; O'Brien, H.A. Jr.

1981-01-01

A procedure for the synthesis and isolation of 77 Br for nuclear medicine research has been developed at LASL. Metallic Mo targets are irradiated at LAMPF with medium-energy protons at high beam current. Following dissolution, volatilization, precipitation, and ion exchange techniques, 77 Br is recovered with a (91 +- 7)% chemical yield and is completely free of all other radioactive species with the exception of small levels of 76 Br and 82 Br. Ci-quantity production capabilities have been demonstrated, and the product is proving successful for the labelling of diverse radiopharmaceuticals. Future improvements in the process are also discussed. (author)

THE IMPACT OF FERTILIZATION AND FOLIAR STIMULATION PRODUCTS BOTH ON INCREASING THE RESISTANCE TO MAJOR PHYTOPATHOGENS ATTACKS, AND ON INCREASING THE QUANTITY AND QUALITY OF WINE GRAPES HARVEST

Directory of Open Access Journals (Sweden)

Cristina BUNESCU

2014-12-01

Full Text Available The paper aimed to demonstrate the impact of fertilization and foliar stimulation products both on increasing the resistance to major phytopathogens attacks, and on increasing the quantity and quality of wine grapes harvest. Applying the foliar fertilizer products Plonvit Kali (c1, Tytanit (c2 and Optysil (c3 to vines, for a period of three years (2011/2013, in phenophases of intensive growth of shoots and grapes at approved dosages, simultaneously with pesticide treatment, not only a reduction of pathogenic fungi attack was obtained, but also and an increase of harvest without diminishing the quality of the grapes.

Memory-Based Quantity Discrimination in Coyotes (Canis latrans

Directory of Open Access Journals (Sweden)

Salif Mahamane

2014-08-01

Full Text Available Previous research has shown that the ratio between competing quantities of food significantly mediates coyotes‘ (Canis latrans ability to choose the larger of two food options. These previous findings are consistent with predictions made by Weber‘s Law and indicate that coyotes possess quantity discrimination abilities that are similar to other species. Importantly, coyotes‘ discrimination abilities are similar to domestic dogs (Canis lupus familiaris, indicating that quantitative discrimination may remain stable throughout certain species‘ evolution. However, while previously shown in two domestic dogs, it is unknown whether coyotes possess the ability to discriminate visual quantities from memory. Here, we address this question by displaying different ratios of food quantities to 14 coyotes before placing the choices out of sight. The coyotes were then allowed to select one of either non-visible food quantities. Coyotes‘ discrimination of quantity from memory does not follow Weber‘s Law in this particular task. These results suggest that working memory in coyotes may not be adapted to maintain information regarding quantity as well as in domestic dogs. The likelihood of a coyote‘s choosing the large option increased when it was presented with difficult ratios of food options first, before it was later presented with trials using more easily discriminable ratios, and when the large option was placed on one particular side. This suggests that learning or motivation increased across trials when coyotes experienced difficult ratios first, and that location of food may have been more salient in working memory than quantity of food.

Provisions for Climate Change Technological Capability in the ...

African Journals Online (AJOL)

organisational) that enable farm or actors to efficiently use equipment and information and improve technology. The paper reviewed the climate change technological capability provisions in agricultural policies, acts and initiatives in Nigeria. The technological capabilities examined were production, investment, minor ...

Quantities used in radiological protection

International Nuclear Information System (INIS)

Menossi, Carlos

2010-01-01

The application of ICRP recommendations requires knowledge of a variety of concepts and magnitudes. Many of them are employed in other fields of science and precision in its definition reflects this wide application. In this regard, information on quantities and basic units of radiation, which exists in numerous publications, are subjects of great interest. The characteristics and radiation effects are studied by physicists, biologists and chemists mainly. However, there are basics that must be known and to be recognized by general practitioners and specialists from all branches of medicine. The information on quantities and units are used only in radiation protection, have been obtained from the reports listed on the attached bibliography. Such quantities and units contain weighting factors used to provide for different types of radiation and energies that affect the body and thus take into account the relative radio-sensitivity of different tissues. Additionally, they have added a series of data for a better understanding of the units: for example, multiples and sub-multiples, and some examples of converting the units used in radiation protection. (author) [es

48 CFR 916.504 - Indefinite-quantity contracts.

Science.gov (United States)

2010-10-01

... indefinite-quantity, multiple award contracts to ensure that adequate consideration exists to contractually... contracts. 916.504 Section 916.504 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CONTRACTING METHODS AND CONTRACT TYPES TYPES OF CONTRACTS Indefinite-Delivery Contracts 916.504 Indefinite-quantity...

The use of averages and other summation quantities in the testing of evaluated fission product yield and decay data. Applications to ENDF/B(IV)

International Nuclear Information System (INIS)

Walker, W.H.

1976-01-01

Averages of some fission product properties can be obtained by multiplying the fission product yield for each fission product by the value of the property (e.g. mass, atomic number, mass defect) for that fission product and summing all significant contributions. These averages can be used to test the reliability of the yield set or provide useful data for reactor calculations. The report gives the derivation of these averages and discusses their application using the ENDF/B(IV) fission product library. The following quantities are treated here: the number of fission products per fission ΣYsub(i); the average mass number and the average number of neutrons per fission; the average atomic number of the stable fission products and the average number of β-decays per fission; the average mass defect of the stable fission products and the total energy release per fission; the average decay energy per fission (beta, gamma and anti-neutrino); the average β-decay energy per fission; individual and group-averaged delayed neutron emission; the total yield for each fission product element. Wherever it is meaningful to do so, a sum is subdivided into its light and heavy mass components. The most significant differences between calculated values based on ENDF/B(IV) and measurements are the β and γ decay energies for 235 U thermal fission and delayed neutron yields for other fissile nuclides, most notably 238 U. (author)

Lipogems Product Treatment Increases the Proliferation Rate of Human Tendon Stem Cells without Affecting Their Stemness and Differentiation Capability.

Science.gov (United States)

Randelli, Pietro; Menon, Alessandra; Ragone, Vincenza; Creo, Pasquale; Bergante, Sonia; Randelli, Filippo; De Girolamo, Laura; Alfieri Montrasio, Umberto; Banfi, Giuseppe; Cabitza, Paolo; Tettamanti, Guido; Anastasia, Luigi

2016-01-01

Increasing the success rate of rotator cuff healing remains tremendous challenge. Among many approaches, the possibility of activating resident stem cells in situ, without the need to isolate them from biopsies, could represent valuable therapeutic strategy. Along this line, it has been recently demonstrated that lipoaspirate product, Lipogems, contains and produces growth-factors that may activate resident stem cells. In this study, human tendon stem cells (hTSCs) from the rotator cuff were cocultured in a transwell system with the Lipogems lipoaspirate product and compared to control untreated cells in terms of cell proliferation, morphology, stem cell marker and VEGF expression, and differentiation and migration capabilities. Results showed that the Lipogems product significantly increases the proliferation rate of hTSCs without altering their stemness and differentiation capability. Moreover, treated cells increase the expression of VEGF, which is crucial for the neovascularization of the tissue during the healing process. Overall, this study supports that directly activating hTSCs with the Lipogems lipoaspirate could represent a new practical therapeutic approach. In fact, obtaining a lipoaspirate is easier, safer, and more cost-effective than harvesting cells from tendon or bone marrow biopsies, expanding them in GMP facility and then reinjecting them in the patient.

Lipogems Product Treatment Increases the Proliferation Rate of Human Tendon Stem Cells without Affecting Their Stemness and Differentiation Capability

Directory of Open Access Journals (Sweden)

Pietro Randelli

2016-01-01

Full Text Available Increasing the success rate of rotator cuff healing remains tremendous challenge. Among many approaches, the possibility of activating resident stem cells in situ, without the need to isolate them from biopsies, could represent valuable therapeutic strategy. Along this line, it has been recently demonstrated that lipoaspirate product, Lipogems, contains and produces growth-factors that may activate resident stem cells. In this study, human tendon stem cells (hTSCs from the rotator cuff were cocultured in a transwell system with the Lipogems lipoaspirate product and compared to control untreated cells in terms of cell proliferation, morphology, stem cell marker and VEGF expression, and differentiation and migration capabilities. Results showed that the Lipogems product significantly increases the proliferation rate of hTSCs without altering their stemness and differentiation capability. Moreover, treated cells increase the expression of VEGF, which is crucial for the neovascularization of the tissue during the healing process. Overall, this study supports that directly activating hTSCs with the Lipogems lipoaspirate could represent a new practical therapeutic approach. In fact, obtaining a lipoaspirate is easier, safer, and more cost-effective than harvesting cells from tendon or bone marrow biopsies, expanding them in GMP facility and then reinjecting them in the patient.

The covariance matrix of derived quantities and their combination

International Nuclear Information System (INIS)

Zhao, Z.; Perey, F.G.

1992-06-01

The covariance matrix of quantities derived from measured data via nonlinear relations are only approximate since they are functions of the measured data taken as estimates for the true values of the measured quantities. The evaluation of such derived quantities entails new estimates for the true values of the measured quantities and consequently implies a modification of the covariance matrix of the derived quantities that was used in the evaluation process. Failure to recognize such an implication can lead to inconsistencies between the results of different evaluation strategies. In this report we show that an iterative procedure can eliminate such inconsistencies

Continuing Professional Development in the quantity surveying ...

African Journals Online (AJOL)

1991-01-01

Jan 1, 1991 ... The research established that quantity surveyors regarded handing in their CPD ... Surveying, Walter Sisulu University, PO Box 1421, East London, 5200, South Africa. ... Keywords: Continuing professional development, quantity surveying, perception .... In spite of this opportunity enshrined in the Act, the.

Economic Order Quantity (EOQ) Optimal Control Considering Selling Price and Salesman Initiative Cost

Science.gov (United States)

Hertini, Elis; Anggriani, Nursanti; Mianna, Winda; Supriatna, Asep K.

2018-03-01

Retailers usually offer several types of similar products. A larger number of available stock products in display space will lead consumer to buy more, as well as giving a negative impression on other types of less available products. However, the amount of display space is limited so capacity of carrying the products is limited. Competition among products to increase demand rate is influenced by stock levels available in display space, price and salesmen’s initiative in promoting the products. The Economic Order Quantity (EOQ) to replenish the stock of the product is dependent on the on-hand inventory. Salesman’s initiative also affects maximum profit obtained by the seller. In this paper, Potryagin’s Maximal Principle is used to determine the state of the inventory levels response to control prices of products. Sensitivity analysis of capacity allocation display space is also presented numerically.

Terms and definitions in the field of radiological technique. Dose quantities and units

International Nuclear Information System (INIS)

1985-12-01

The standard gives the terms and definitions of concepts, dose quantities and units. The radiation field condition 'secondary electron equilibrium', which forms part of the definition of standard ion dose, is given more precisely. The term 'free in air' is used in its original meaning, i.e. characterization of measuring conditions excluding avoidable stray radiation, which deviates from DIN 6814, part 3/06.72. Dosemeters for measurement of standard ion dose of air kerma are calibrated 'free in air', but this calibration condition is not part of the quantity definition. The quantities standard ion dose or air kerma therefore can also be measured in any other material. The qunatitative relationships between standard ion dose and the quantities 'exposure' and air kerma, as given in the ICRU publication 33 'Quantities and Units' (1980), are explained. The standard introduces the SI units Gray (for energy dose), Sievert (for dose equivalent), and Becquerel (for the activity of a radioactive substance). As the change to the SI units conceals the approximated equality of the numerical values of the standrd ion dose of photon radiation in roentgen, of the energy dose for soft tissue in rad, and of the dose equivalent in rem, new definitions are given in accordance with ICRU 33 for the quantities specified dose rate, dose rate constant, and area exposure product. These definitions use the terms 'energy dose' and 'kerma'. The dose concepts applied in the field of radiation protection, especially ambient dose and individual dose, are defined as dose equivalents in compliance with the Radiation Protection Ordinance. The relevant sections present information on the conversion of standard ion dose values to the corresponding values of kerma, energy dose, or dose equivalent. (orig./HP) [de

Maximizing remanufacturing profit using product acquisition management

NARCIS (Netherlands)

V.D.R. Guide Jr (Daniel); R.H. Teunter (Ruud); L.N. van Wassenhove (Luk)

2001-01-01

textabstractThe profitability of remanufacturing depends on the quantity and quality of product returns and on the demand for remanufactured products. The quantity and quality of product returns can be influenced by varying quality dependent acquisition prices, i.e., by using product acquisition

Center of Excellence for Applied Mathematical and Statistical Research in support of development of multicrop production monitoring capability

Science.gov (United States)

Woodward, W. A.; Gray, H. L.

1983-01-01

Efforts in support of the development of multicrop production monitoring capability are reported. In particular, segment level proportion estimation techniques based upon a mixture model were investigated. Efforts have dealt primarily with evaluation of current techniques and development of alternative ones. A comparison of techniques is provided on both simulated and LANDSAT data along with an analysis of the quality of profile variables obtained from LANDSAT data.

Continuing Professional Development in the quantity surveying ...

African Journals Online (AJOL)

This research study was conducted in order to investigate Continuing Professional Development (CPD) in the South African quantity surveying profession. The study further aimed to establish the reasons why some quantity surveyors do not acquire the required CPD hours and face losing their professional registration with ...

Hypergraph topological quantities for tagged social networks

Science.gov (United States)

Zlatić, Vinko; Ghoshal, Gourab; Caldarelli, Guido

2009-09-01

Recent years have witnessed the emergence of a new class of social networks, which require us to move beyond previously employed representations of complex graph structures. A notable example is that of the folksonomy, an online process where users collaboratively employ tags to resources to impart structure to an otherwise undifferentiated database. In a recent paper, we proposed a mathematical model that represents these structures as tripartite hypergraphs and defined basic topological quantities of interest. In this paper, we extend our model by defining additional quantities such as edge distributions, vertex similarity and correlations as well as clustering. We then empirically measure these quantities on two real life folksonomies, the popular online photo sharing site Flickr and the bookmarking site CiteULike. We find that these systems share similar qualitative features with the majority of complex networks that have been previously studied. We propose that the quantities and methodology described here can be used as a standard tool in measuring the structure of tagged networks.

Evaluation of exposure in mammography: limitations of average glandular dose and proposal of a new quantity

International Nuclear Information System (INIS)

Geeraert, N.; Bosmans, H.; Klausz, R.; Muller, S.; Bloch, I.

2015-01-01

The radiation risk in mammography is traditionally evaluated using the average glandular dose. This quantity for the average breast has proven to be useful for population statistics and to compare exposure techniques and systems. However it is not indicating the individual radiation risk based on the individual glandular amount and distribution. Simulations of exposures were performed for six appropriate virtual phantoms with varying glandular amount and distribution. The individualised average glandular dose (iAGD), i.e. the individual glandular absorbed energy divided by the mass of the gland, and the glandular imparted energy (GIE), i.e. the glandular absorbed energy, were computed. Both quantities were evaluated for their capability to take into account the glandular amount and distribution. As expected, the results have demonstrated that iAGD reflects only the distribution, while GIE reflects both the glandular amount and distribution. Therefore GIE is a good candidate for individual radiation risk assessment. (authors)

Technological Capability's Predictor Variables

Directory of Open Access Journals (Sweden)

Fernanda Maciel Reichert

2011-03-01

Full Text Available The aim of this study was to identify the factors that influence in configuration of the technological capability of companies in sectors with medium-low technological intensity. To achieve the goal proposed in this article a survey was carried out. Based on the framework developed by Lall (1992 which classifies firms in basic, intermediate and advanced level of technological capability; it was found that the predominant technological capability is intermediate, with 83.7% of respondent companies (plastics companies in Brazil. It is believed that the main contribution of this study is the finding that the dependent variable named “Technological Capability” can be explained at a rate of 65% by six variables: development of new processes; selection of the best equipment supplier; sales of internally developed new technology to third parties; design and manufacture of equipment; study of the work methods and perform inventory control; and improvement of product quality.

Integrated System Health Management (ISHM): Systematic Capability Implementation

Science.gov (United States)

Figueroa, Fernando; Holland, Randy; Schmalzwel, John; Duncavage, Dan

2006-01-01

This paper provides a credible approach for implementation of ISHM capability in any system. The requirements and processes to implement ISHM capability are unique in that a credible capability is initially implemented at a low level, and it evolves to achieve higher levels by incremental augmentation. In contrast, typical capabilities, such as thrust of an engine, are implemented once at full Functional Capability Level (FCL), which is not designed to change during the life of the product. The approach will describe core ingredients (e.g. technologies, architectures, etc.) and when and how ISHM capabilities may be implemented. A specific architecture/taxonomy/ontology will be described, as well as a prototype software environment that supports development of ISHM capability. This paper will address implementation of system-wide ISHM as a core capability, and ISHM for specific subsystems as expansions and evolution, but always focusing on achieving an integrated capability.

Dynamic capabilities and innovation management: a conceptual approach

Directory of Open Access Journals (Sweden)

Jose Javier Aguilar Zambrano

2006-07-01

Full Text Available Organizational capabilities are those behavioral routines oriented to develop a specific task (NELSON; WINTER, 1982. These capabilities define what the company knows to do and how must to do it. Nevertheless, the repetitive character of these capabilities could be producing stopped processes (METCALFE, 1995 which both limit the generation of new capabilities and diminishing the dynamism in the production, reproduction and reconfiguration of new capabilities (TEECE; PISANO, 1997. This article compares and analyzes different theoretical-conceptual perspectives for generation and reconfiguration of technological capabilities within an organization. Additionally this article suggests that dynamic capabilities to make feasible innovation processes within an organization. The general concept of dynamic capacities will be used like driver of changes to produce and reconfigurate capabilities in the organization. The glance of the dynamic capabilities allows understanding the complexity of the creation, development and use of capabilities. This understanding could constitute material fundamental to manage learning processes and organizational change oriented to innovation.

Remarks and suggestions concerned with formulation of the definition of quantity ''committed dose'' and quantity ''radiation burden'' useful in estimates of population exposure

International Nuclear Information System (INIS)

Cwik, T.

1990-01-01

The paper contains remarks to the definitions of the quantity ''commited dose'' given in the publications of the ICRP. The suggestions are presented on the mode of formulating the definition of the quantity ''commited dose'' and the definition of the quantity denoted hitherto by the symbol H 50 . The other suggestions deal with introduction of the quantity ''radiation burden'', assigned for use in assessments of irradiation expressed ''per caput'' of population. 9 refs. (author)

Guidelines on the Harmonization of Response and Assistance Capabilities for a Nuclear or Radiological Emergency. EPR-Harmonized Assistance Capabilities 2017

International Nuclear Information System (INIS)

2017-01-01

The aim of this publication is to provide guidelines to Member States and relevant international organizations on processes and arrangements that may be implemented as part of emergency preparedness and response (EPR) arrangements to assist in harmonizing national EPR capabilities and international assistance, when requested so that the products of their response operations are comparable and compatible. This publication provides details on the types, contents and formats of data and mapping products that may be generated during a response to nuclear or radiological emergencies. The publication applies the safety principles stated in IAEA Safety Standards Series No. SF 1, Fundamental Safety Principles, primarily Principle 9 on EPR, and it will be of assistance to Member States in meeting the requirements established in IAEA Safety Standards Series No. GSR Part 7, Preparedness and Response for a Nuclear or Radiological Emergency. Requirement 17 of this publication establishes that the “government shall ensure that adequate arrangements are in place to benefit from, and to contribute to the provision of, international assistance for preparedness and response for a nuclear or radiological emergency.” As part of these arrangements, it is required that due account is taken of the “compatibility requirements for the capabilities to be obtained from and to be rendered to different States so as to ensure the usefulness of these capabilities.” These guidelines are intended to help Member States to ensure that compatible response and assistance capabilities are in place. This publication is intended to be used by national authorities involved in emergency preparedness and response, and national response teams in all States. The guidelines provided need to be adapted to fit a State’s particular organizational arrangements, language, terminology, concept of operation, and capabilities. However, the products generated need to be compatible with the types and formats

Sperm competition selects for sperm quantity and quality in the Australian Maluridae.

Science.gov (United States)

Rowe, Melissah; Pruett-Jones, Stephen

2011-01-25

When ejaculates from rival males compete for fertilization, there is strong selection for sperm traits that enhance fertilization success. Sperm quantity is one such trait, and numerous studies have demonstrated a positive association between sperm competition and both testes size and the number of sperm available for copulations. Sperm competition is also thought to favor increases in sperm quality and changes in testicular morphology that lead to increased sperm production. However, in contrast to sperm quantity, these hypotheses have received considerably less empirical support and remain somewhat controversial. In a comparative study using the Australian Maluridae (fairy-wrens, emu-wrens, grasswrens), we tested whether increasing levels of sperm competition were associated with increases in both sperm quantity and quality, as well as an increase in the relative amount of seminiferous tubule tissue contained within the testes. After controlling for phylogeny, we found positive associations between sperm competition and sperm numbers, both in sperm reserves and in ejaculate samples. Additionally, as sperm competition level increased, the proportion of testicular spermatogenic tissue also increased, suggesting that sperm competition selects for greater sperm production per unit of testicular tissue. Finally, we also found that sperm competition level was positively associated with multiple sperm quality traits, including the proportion of motile sperm in ejaculates and the proportion of both viable and morphologically normal sperm in sperm reserves. These results suggest multiple ejaculate traits, as well as aspects of testicular morphology, have evolved in response to sperm competition in the Australian Maluridae. Furthermore, our findings emphasize the importance of post-copulatory sexual selection as an evolutionary force shaping macroevolutionary differences in sperm phenotype.

Analytical Chemistry Core Capability Assessment - Preliminary Report

International Nuclear Information System (INIS)

Barr, Mary E.; Farish, Thomas J.

2012-01-01

The concept of 'core capability' can be nebulous one. Even at a fairly specific level, where core capability equals maintaining essential services, it is highly dependent upon the perspective of the requestor. Samples are submitted to analytical services because the requesters do not have the capability to conduct adequate analyses themselves. Some requests are for general chemical information in support of R and D, process control, or process improvement. Many analyses, however, are part of a product certification package and must comply with higher-level customer quality assurance requirements. So which services are essential to that customer - just those for product certification? Does the customer also (indirectly) need services that support process control and improvement? And what is the timeframe? Capability is often expressed in terms of the currently utilized procedures, and most programmatic customers can only plan a few years out, at best. But should core capability consider the long term where new technologies, aging facilities, and personnel replacements must be considered? These questions, and a multitude of others, explain why attempts to gain long-term consensus on the definition of core capability have consistently failed. This preliminary report will not try to define core capability for any specific program or set of programs. Instead, it will try to address the underlying concerns that drive the desire to determine core capability. Essentially, programmatic customers want to be able to call upon analytical chemistry services to provide all the assays they need, and they don't want to pay for analytical chemistry services they don't currently use (or use infrequently). This report will focus on explaining how the current analytical capabilities and methods evolved to serve a variety of needs with a focus on why some analytes have multiple analytical techniques, and what determines the infrastructure for these analyses. This information will be

Determination of dosimetric quantities in pediatric abdominal computed tomography scans

Energy Technology Data Exchange (ETDEWEB)

Jornada, Tiago da Silva [Universidade Federal de Sao Paulo (UNIFESP), Sao Paulo, SP (Brazil). Escola Paulista de Medicina. Dept. de Diagnostipo por Imagem; Silva, Teogenes Augusto da, E-mail: silvata@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2014-09-15

Objective: aiming at contributing to the knowledge on doses in computed tomography (CT), this study has the objective of determining dosimetric quantities associated with pediatric abdominal CT scans, comparing the data with diagnostic reference levels (DRL). Materials and methods: the study was developed with a Toshiba Asteion single-slice CT scanner and a GE BrightSpeed multi-slice CT unit in two hospitals. Measurements were performed with a pencil-type ionization chamber and a 16 cm-diameter polymethylmethacrylate trunk phantom. Results: No significant difference was observed in the values for weighted air kerma index (C{sub W}), but the differences were relevant in values for volumetric air kerma index (C{sub VOL}), air kerma-length product (P{sub KL,CT}) and effective dose. Conclusion: Only the CW values were lower than the DRL, suggesting that dose optimization might not be necessary. However, P{sub KL,CT} and effective dose values stressed that there still is room for reducing pediatric radiation doses. The present study emphasizes the importance of determining all dosimetric quantities associated with CT scans. (author)

Determination of dosimetric quantities in pediatric abdominal computed tomography scans*

Science.gov (United States)

Jornada, Tiago da Silva; da Silva, Teógenes Augusto

2014-01-01

Objective Aiming at contributing to the knowledge on doses in computed tomography (CT), this study has the objective of determining dosimetric quantities associated with pediatric abdominal CT scans, comparing the data with diagnostic reference levels (DRL). Materials and methods The study was developed with a Toshiba Asteion single-slice CT scanner and a GE BrightSpeed multi-slice CT unit in two hospitals. Measurements were performed with a pencil-type ionization chamber and a 16 cm-diameter polymethylmethacrylate trunk phantom. Results No significant difference was observed in the values for weighted air kerma index (CW), but the differences were relevant in values for volumetric air kerma index (CVOL), air kerma-length product (PKL,CT) and effective dose. Conclusion Only the CW values were lower than the DRL, suggesting that dose optimization might not be necessary. However, PKL,CT and effective dose values stressed that there still is room for reducing pediatric radiation doses. The present study emphasizes the importance of determining all dosimetric quantities associated with CT scans. PMID:25741103

Partnership for the Revitalization of National Wind Tunnel Force Measurement Capability

Science.gov (United States)

Rhew, Ray D.; Skelley, Marcus L.; Woike, Mark R.; Bader, Jon B.; Marshall, Timothy J.

2009-01-01

Lack of funding and lack of focus on research over the past several years, coupled with force measurement capabilities being decentralized and distributed across the National Aeronautics and Space Administration (NASA) research centers, has resulted in a significant erosion of (1) capability and infrastructure to produce and calibrate force measurement systems; (2) NASA s working knowledge of those systems; and (3) the quantity of high-quality, full-capability force measurement systems available for use in aeronautics testing. Simultaneously, and at proportional rates, the capability of industry to design, manufacture, and calibrate these test instruments has been eroding primarily because of a lack of investment by the aeronautics community. Technical expertise in this technology area is a core competency in aeronautics testing; it is highly specialized and experience-based, and it represents a niche market for only a few small precision instrument shops in the United States. With this backdrop, NASA s Aeronautics Test Program (ATP) chartered a team to examine the issues and risks associated with the problem, focusing specifically on strain- gage balances. The team partnered with the U.S. Air Force s Arnold Engineering Development Center (AEDC) to exploit their combined capabilities and take a national level government view of the problem. This paper describes the team s approach, its findings, and its recommendations, and the current status for revitalizing the government s balance capability with respect to designing, fabricating, calibrating, and using the instruments.

41 CFR 101-27.102 - Economic order quantity principle.

Science.gov (United States)

2010-07-01

... MANAGEMENT 27.1-Stock Replenishment § 101-27.102 Economic order quantity principle. The economic order quantity (EOQ) principle is a means for achieving economical inventory management. Application of the EOQ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Economic order quantity...

Methods of ecological capability evaluation of forest

International Nuclear Information System (INIS)

Hosseini, M.; Makhdoum, M.F.; Akbarnia, M.; Saghebtalebi, Kh.

2000-01-01

In this research common methods of ecological capability evaluation of forests were reviewed and limitations for performance were analysed. Ecological capability of forests is an index that show site potential in several role of wood production, soil conservation, flood control, biodiversity, conservation and water supply. This index is related to ecological characteristics of land, such as soil, micro climate, elevation, slope and aspect that affect potential of sites. Suitable method of ecological capability evaluation must be chosen according to the objective of forestry. Common methods for ecological capability evaluation include plant and animal diversity, site index curve, soil and land form, inter branches, index plants, leave analyses, analyses regeneration and ecological mapping

Relevance of protection quantities in medical exposures

International Nuclear Information System (INIS)

Pradhan, A.S.

2008-01-01

International Commission on Radiological Protection (ICRP) continues to classify the exposures to radiation in three categories; namely 1- occupational exposure, 2- public exposure, and 3- medical exposure. Protection quantities are primarily meant for the regulatory purpose in radiological protection for controlling and limiting stochastic risks in occupational and public exposures. These are based on two basic assumptions of 1- linear no-threshold dose-effect relationship (LNT) at low doses and 2- long-term additivity of low doses. Medical exposure are predominantly delivered to individuals (patients) undergoing diagnostic examinations, interventional procedures and radiation therapy but also include individual caring for or comforting patients incurring exposure and the volunteers of biomedical medical research programmes. Radiation protection is as relevant to occupational and public exposure as to medical exposures except that the dose limits set for the formers are not applicable to medical exposure but reference levels and dose constrains are recommended for diagnostic and interventional medical procedures. In medical institutions, both the occupational and medical exposure takes place. Since the doses in diagnostic examinations are low, it has been observed that not only the protection quantities are often used in such cases but these are extended to estimate the number of cancer deaths due to such practices. One of the striking features of the new ICRP recommendations has been to elaborate the concepts of the dosimetric quantities. The limitation of protection quantities ((Effective dose, E=Σ RT D TR .W T .W R and Equivalent Dose H T =Σ RT D TR .W R ) have been brought out and this has raised a great concern and initiated debates on the use of these quantities in medical exposures. Consequently, ICRP has set a task group to provide more details and the recommendations. It has, therefore, became important to draw the attention of medical physics community

Conceptualizing innovation capabilities: A contingency perspective

Directory of Open Access Journals (Sweden)

Tor Helge Aas

2017-01-01

Full Text Available Empirical research has confirmed that a positive relationship exists between the implementation of innovation activities and the future performance of organizations. Firms utilize resources and capabilities to develop innovations in the form of new products, services or processes. Some firms prove to be better at reproducing innovation success than others, and the capacity to do so is referred to as innovation capability. However, the term innovation capability is ambiguously treated in extant literature. There are several different definitions of the concept and the distinction between innovation capabilities and other types of capabilities, such as dynamic capabilities, is neither explicitly stated, nor is the relationship between the concept and other resource- and capability-based concepts within strategy theory established. Although innovation is increasingly identified as crucial for a firm’s sustainable competitiveness in contemporary volatile and complex markets, the strategy-innovation link is underdeveloped in extant research. To overcome this challenge this paper raises the following research question: What type of innovation capabilities are required to innovate successfully? Due to the status of the extant research, we chose a conceptual research design to answer our research question and the paper contributes with a conceptual framework to discuss what innovation capabilities firms need to reproduce innovation success. Based on careful examination of current literature on innovation capability specifically, and the strategy-innovation link in general, we suggest that innovation capability must be viewed along two dimensions – innovation novelty and market characteristics. This framework enables the identification of four different contexts for innovation capabilities in a two-bytwo matrix. We discuss the types of innovation capabilities necessary within the four different contexts. This novel framework contributes to the

Informing future NRT satellite distribution capabilities: Lessons learned from NASA's Land Atmosphere NRT capability for EOS (LANCE)

Science.gov (United States)

Davies, D.; Murphy, K. J.; Michael, K.

2013-12-01

NASA's Land Atmosphere Near real-time Capability for EOS (Earth Observing System) (LANCE) provides data and imagery from Terra, Aqua and Aura satellites in less than 3 hours from satellite observation, to meet the needs of the near real-time (NRT) applications community. This article describes the architecture of the LANCE and outlines the modifications made to achieve the 3-hour latency requirement with a view to informing future NRT satellite distribution capabilities. It also describes how latency is determined. LANCE is a distributed system that builds on the existing EOS Data and Information System (EOSDIS) capabilities. To achieve the NRT latency requirement, many components of the EOS satellite operations, ground and science processing systems have been made more efficient without compromising the quality of science data processing. The EOS Data and Operations System (EDOS) processes the NRT stream with higher priority than the science data stream in order to minimize latency. In addition to expediting transfer times, the key difference between the NRT Level 0 products and those for standard science processing is the data used to determine the precise location and tilt of the satellite. Standard products use definitive geo-location (attitude and ephemeris) data provided daily, whereas NRT products use predicted geo-location provided by the instrument Global Positioning System (GPS) or approximation of navigational data (depending on platform). Level 0 data are processed in to higher-level products at designated Science Investigator-led Processing Systems (SIPS). The processes used by LANCE have been streamlined and adapted to work with datasets as soon as they are downlinked from satellites or transmitted from ground stations. Level 2 products that require ancillary data have modified production rules to relax the requirements for ancillary data so reducing processing times. Looking to the future, experience gained from LANCE can provide valuable lessons on

DOE approach to threshold quantities

International Nuclear Information System (INIS)

Wickham, L.E.; Kluk, A.F.; Department of Energy, Washington, DC)

1985-01-01

The Department of Energy (DOE) is developing the concept of threshold quantities for use in determining which waste materials must be handled as radioactive waste and which may be disposed of as nonradioactive waste at its sites. Waste above this concentration level would be managed as radioactive or mixed waste (if hazardous chemicals are present); waste below this level would be handled as sanitary waste. Ideally, the threshold must be set high enough to significantly reduce the amount of waste requiring special handling. It must also be low enough so that waste at the threshold quantity poses a very small health risk and multiple exposures to such waste would still constitute a small health risk. It should also be practical to segregate waste above or below the threshold quantity using available instrumentation. Guidance is being prepared to aid DOE sites in establishing threshold quantity values based on pathways analysis using site-specific parameters (waste stream characteristics, maximum exposed individual, population considerations, and site specific parameters such as rainfall, etc.). A guidance dose of between 0.001 to 1.0 mSv/y (0.1 to 100 mrem/y) was recommended with 0.3 mSv/y (30 mrem/y) selected as the guidance dose upon which to base calculations. Several tasks were identified, beginning with the selection of a suitable pathway model for relating dose to the concentration of radioactivity in the waste. Threshold concentrations corresponding to the guidance dose were determined for waste disposal sites at a selected humid and arid site. Finally, cost-benefit considerations at the example sites were addressed. The results of the various tasks are summarized and the relationship of this effort with related developments at other agencies discussed

Production capability of the US uranium industry

International Nuclear Information System (INIS)

deVergie, P.C.; Anderson, J.R.; Miley, J.W.; Frederick, C.J.L.

1980-01-01

Demand for U 3 O 8 through the late 1990s could be met at the grades and costs represented by the $30 resources, although for the next 3 or 4 years, production will probably be from the lower cost portions of these resources if prices remain low. However, to meet currently projected uranium requirements beyond the year 2000, there will have to be a transition by the mid-1990s to higher cost and lower grade production in order to include supply from the additional increment of resources available between the $30 and $50 levels. Plans and financial commitments required to accomplish such a transition must be initiated y the mid-1980s, since lead times are increasing for exploration and for mill licensing and construction. Engineering planning and feasibility analyses would have to be carried out under a more advanced time frame than previously required. The importance of the potential resources can easily be seen. In meeting the high-case demand during the years 2005 through 2019 more than 50% of the production would be from resources assigned to the $50 probable potential resource category. By about the year 2006, there will have had to be considerable development of the possible, and perhaps, some of the speculative resources to assure continued production expansion; by 2020, more than 50% of the production would depend on the previous successes in finding and developing such resources. The continuation of the current trend in production curtailment and decreasing exploration will significantly lessen the domestic uranium industry's ability to respond quickly to the projected increases in uranium requirements. The industry's future will be unsettled until it preceives clear indications of demand and price incentives that will justify long-term capital investments

Physical quantities, their role and treatment in gasflow measurement techniques

International Nuclear Information System (INIS)

Narjes, L.

1977-06-01

We begin by taking a closer look at the concepts physical quantity, dimension and unit of measurement. Then a survey is given of the physical quantities applied in gasflow measurement techniques. Here the volume-, as well as the mass-flow rate, as derived quantities are of particular interest. The application of these quantities in relation to the legal units of measurement is specifically described. In addition the quantity equation and further the quantity equation adapted to the use of suitable units and their modes of application are compared. In the appendix four examples clarify these modes. Special attention is paid to the quantity equation adapted to practically oriented units. The applications of this type of equation in VDI regulations, standards and other technical guidelines for measurement of flow are mentioned. Moreover, the meaning of the standard state for the comparison of flows of gaseous fluids is illustrated. The difficulties concerning an international agreement on uniform standard temperature are explained. Starting from there, the advantages of the fundamental quantity 'amount of substance' applied to the measurement of flow are described. The use of this quantity for the thermodynamic state of ideal and real gases, respectively gas mixtures, is demonstrated in the appendix by an example. (orig.) [de

Risk Management Capability Maturity and Performance of Complex Product and System (CoPS Projects with an Asian Perspective

Directory of Open Access Journals (Sweden)

Ren, Y.

2014-07-01

Full Text Available Complex Products and Systems (CoPS are high value, technology and engineering-intensive capital goods. The motivation of this study is the persistent high failure rate of CoPS projects, Asian CoPS provider’s weak capability and lack of specific research on CoPS risk management. This paper evaluates risk management maturity level of CoPS projects against a general CoPS risk management capability maturity model (RM-CMM developed by the authors. An Asian based survey was conducted to investigate the value of RM to project performance, and Asian (non-Japanese CoPS implementers’ perceived application of RM practices, their strengths and weaknesses. The survey result shows that higher RM maturity level leads to higher CoPS project performance. It also shows project complexity and uncertainty moderates the relationship between some RM practices and project performance, which implies that a contingency approach should be adopted to manage CoPS risks effectively. In addition, it shows that Asian CoPS implementers are weak in RM process and there are also rooms for improvement in the softer aspects of organizational capabilities and robustness.

Appraisal of Information Technology Requirements in Quantity Surveying Firms in Northern Nigeria

Directory of Open Access Journals (Sweden)

Y. U. Datti

2017-06-01

Full Text Available A worrisome trend in the adoption of emerging technologies for competitive advantages and improved productivities by QSs have been observed in that there is overwhelming evidence that there is an increasing usage of IT in quantity surveying firms but little or no noticeable benefits on the practice. It however becomes pertinent to ask then, that despite the increases adoption of computing and telecommunication technologies, why isn’t there any noticeable change due to the impacts of IT in the Nigerian Construction Industry with particular reference to Quantity Surveying practices. The study appraised the requirement of IT in quantity surveying practice in Nigeria. It examined the position of IT in quantity surveying firms in terms of its requirement and analyzed IT requirements-based problem constraining quantity surveying firms. The study is a survey research designed to obtain information on information technology in QS firms. A self-administered questionnaire was employed to quantity surveyors in consulting firms for responses. Responses were returned and analyzed using severity index and later ranked in order of importance. The results indicate a high level of computerization of professional services among the firms with greater number of their computers being networked. However, despite high level of networking of available computers, sharing of printers and other scarce tools/technologies are not established. Compared to developed countries such as Canada, Australia, United Kingdom and USA, the position of IT requirements in QS firms in Nigeria can be said to be at basic level with organization possessing and applying basic IT tools and technologies (e.g. scanners, digital cameras, dvd/cd-rom, general purpose software, QS application software, chat programs etc. in their daily operation and processes. While most firms are progressing toward intermediate level by possessing intermediate IT tools and technologies (e.g. teleconferencing

Capabilities of the Power Burst Facility

International Nuclear Information System (INIS)

Spencer, W.A.; Jensen, A.M.; McCardell, R.K.

1982-01-01

The unique and diverse test capabilities of the Power Burst Facility (PBF) are described in this paper. The PBF test reactor, located at the Idaho National Engineering Laboratory, simulates normal, off-normal, and accident operating conditions of light water reactor fuel rods. An overview description is given, with specific detail on design and operating characteristics of the driver core, experiment test loop, fission product detection system, test train assembly facility, and support equipment which make the testing capability of the PBF so versatile

Procurement-distribution model for perishable items with quantity discounts incorporating freight policies under fuzzy environment

Directory of Open Access Journals (Sweden)

Makkar Sandhya

2013-01-01

Full Text Available A significant issue of the supply chain problem is how to integrate different entities. Managing supply chain is a difficult task because of complex integrations, especially when the products are perishable in nature. Little attention has been paid on ordering specific perishable products jointly in uncertain environment with multiple sources and multiple destinations. In this article, we propose a supply chain coordination model through quantity and freight discount policy for perishable products under uncertain cost and demand information. A case is provided to validate the procedure.

Discounting of quantity surveying fees in South Africa

African Journals Online (AJOL)

by clients have forced Quantity Surveying firms into competition with ... Furthermore, 43% of consulting engineering firms were discounting their fees at a rate of .... Quantity. Surveying services are also offered in the fields of dispute resolution,.

Supply capability creation process: Key milestone criteria and activities

Energy Technology Data Exchange (ETDEWEB)

Verrollot, J.; Tolonen, A.; Harkonen, J.; Haapasalo, H.

2017-07-01

The article focuses on supply capability creation (SCC) within the new product development (NPD). The purpose is to establish an SCC process describing the main SCC activities and milestone criteria in preparing the supply process for new products Design/methodology/approach: The article analyses the earlier research, carries out current state analysis of six case companies regarding the SCC areas, and proposes a SCC process. Findings: The developed SCC process aims at preparing the operational supply capability for a developed new product based on the preferred, qualified and contracted suppliers and materials along the NPD process, and ultimately at the product ramp-up. Originality/value: This paper introduces a SCC process that has not been presented earlier in the literature, highlighting the important role of the SCC for successful product ramp-ups.

OLED Lighting Products: Capabilities, Challenges, Potential

Energy Technology Data Exchange (ETDEWEB)

Miller, N. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Leon, F. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-05-31

A report that focuses on the potential for architectural OLED lighting – describing currently available OLED products as well as promised improvements, and addressing the technology and market hurdles that have thus far prevented wider use of OLEDs.

New quantities in radiation protection and conversion coefficients

International Nuclear Information System (INIS)

1986-01-01

Four new quantities have been proposed by the ICRP for use in radiation protection from external sources, i.e. the ambient dose equivalent, the directional dose equivalent, the individual dose equivalent (penetrating), and the individual dose equivalent (superficial). These quantities are briefly described together with two new concepts of expanded and aligned fields. The BCRU recommends that these quantities should be adopted for use in the UK together with conversion coefficients when re-calibrating existing instruments, reporting the results of measurements and designing instruments. (UK)

Design to Process Capabilities: challenges for the use of Process Capability Databases (PCDBs) in development

DEFF Research Database (Denmark)

Eifler, Tobias; Göhler, Simon Moritz; Howard, Thomas J.

2014-01-01

capabilities may lead to low yields and a cost/time overrun, conservatively underestimated capabilities affect quality through the reduced design space, or through increased play, rattle/noise, size or weight. A possibility to overcome the subjective assessment of variation in development projects is a Process...... and Maiti (2012), Breyfogle (2003)]. At the same time, information on the achievable manufacturing accuracy or the supplier’s performance is usually inaccurate and largely qualitative in early development stages. Design decisions as well as the choice of manufacturing processes, therefore, often rely...... Capability Data Base (PCDB) offering valuable insight into the actual or expected performance of production processes (Tata and Thornton, 1999). But although the potential benefits as well as initial challenges for the use of PCDBs have been addressed in earlier research, e. g. by Delaney and Phelan (2008...

Capable design or designing capabilities? An exploration of service design as an emerging organizational capability in Telenor – Martinkenaite

Directory of Open Access Journals (Sweden)

Ieva Martinkenaite

2017-01-01

Full Text Available This empirical paper examines a process, starting with the managerial decision to make service design an organizational capability, and follows it as it unfolds over time within one organization. Service design has become an established business practice of how firms create new products and services to promote differentiation in an increasingly uncertain business landscape. Implicit in the literature on service design are assumptions about strategic implications of adopting the prescribed innovation methods and tools. However, little is known about how service design evolves into an organizational capability enabling firms to transform their existing businesses and sustain competitiveness. Through a longitudinal, exploratory case study of service design practices in one of the world’s largest telecommunications companies, we explicate mechanisms through which service design evolves into an organizational capability by exploring the research question: what are the mechanisms through which service design develops into an organizational capability? Our study reveals the effect of an initial introduction of service design tools, identification of boundaryspanning actors and co-alignment of dedicated resources between internal functions, as well as through co-creation with customers. Over time, these activities lead to the adoption of service design practices, and subsequently these practices spark incremental learning throughout the organization, alter managerial decisions and influence multiple paths for the development of new capabilities. Reporting on this process, we are able to describe how service design practices were disseminated and institutionalized within the organization we observed. This study thus contributes by informing how service design can evolve into an organizational capability, as well as by bridging the emerging literature on service design and design thinking with established strategy theory. Further research will have to

A conserved quantity in thin body dynamics

International Nuclear Information System (INIS)

Hanna, J.A.; Pendar, H.

2016-01-01

Thin, solid bodies with metric symmetries admit a restricted form of reparameterization invariance. Their dynamical equilibria include motions with both rigid and flowing aspects. On such configurations, a quantity is conserved along the intrinsic coordinate corresponding to the symmetry. As an example of its utility, this conserved quantity is combined with linear and angular momentum currents to construct solutions for the equilibria of a rotating, flowing string, for which it is akin to Bernoulli's constant. - Highlights: • A conserved quantity relevant to the dynamical equilibria of thin structures. • A mixed Lagrangian–Eulerian non-material action principle for fixed windows of axially moving systems. • Analytical solutions for rotating, flowing strings (yarn balloons). • Noether meets Bernoulli in a textile factory.

A conserved quantity in thin body dynamics

Energy Technology Data Exchange (ETDEWEB)

Hanna, J.A., E-mail: hannaj@vt.edu [Department of Biomedical Engineering and Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061 (United States); Department of Physics, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061 (United States); Pendar, H. [Department of Biomedical Engineering and Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, VA 24061 (United States)

2016-02-15

Thin, solid bodies with metric symmetries admit a restricted form of reparameterization invariance. Their dynamical equilibria include motions with both rigid and flowing aspects. On such configurations, a quantity is conserved along the intrinsic coordinate corresponding to the symmetry. As an example of its utility, this conserved quantity is combined with linear and angular momentum currents to construct solutions for the equilibria of a rotating, flowing string, for which it is akin to Bernoulli's constant. - Highlights: • A conserved quantity relevant to the dynamical equilibria of thin structures. • A mixed Lagrangian–Eulerian non-material action principle for fixed windows of axially moving systems. • Analytical solutions for rotating, flowing strings (yarn balloons). • Noether meets Bernoulli in a textile factory.

The ICRU dose equivalence quantities in radiation protection

International Nuclear Information System (INIS)

Grimbergen, T.W.M.

1990-09-01

The definitions and application of the new ICRU radiation protection quantities have been reviewed and studied in literature. Special emphasis was laid on the consequences of the use of the new quantities by personnel dosimetry services, and on the consequences of the use of the new quantities during an intercomparison programme for dosimetry services. The study shows that the recommendations of the ICRU are not yet complete and not fully realizable. This means that the dosimetry services always have to make certain approximations, when they use the new quantities. In literature, several approaches have been proposed. The feasibility of an approach depends on the characteristics of the dosimeters used. The use of different approaches by the dosimetry services is thought to be of possible influence on the results of an intercomparison programme. (author). 42 refs.; 3 figs.; 1 tab

Foreign materials in the repository - update of estimated quantities

International Nuclear Information System (INIS)

Hagros, A.

2007-03-01

In a repository for spent nuclear fuel, a variety of materials are used during the construction process and during the operation of the repository. In addition to materials necessary for the construction and operation, some materials may be transported into the repository through the ventilation air, as emissions from vehicles, as waste produced by the staff etc. Both of these two types of materials are considered here and their quantities - both the introduced quantities and the quantities that remain after closure - in the repository constructed at Olkiluoto in Eurajoki, Finland are estimated here based on new information. This work is intended to update the estimations that have been made previously, and it takes advantage of the experience collected during the construction of the underground rock characterisation facility ONKALO at Olkiluoto. During this construction process, the quantities of the different construction materials introduced into the underground openings have been monitored and they form a basis for estimating the quantities to be used in the future. The estimations made in this report are specific to a KBS-3V type repository and to the Olkiluoto site, although in some cases more generic information has been used, particularly when the relevant quantities have not been monitored in the ONKALO. The estimations are based on the new repository layout produced in 2006 and consider the latest plans for grouting and rock support. As these plans are generally not final yet, several different alternative plans are assumed when necessary. Also two different strategies for the backfilling of the tunnels are considered. The most significant differences with respect to the results of an earlier estimation are related to the materials used in grouting, shotcreting and in support bolts. In the cases where a mixture of bentonite and crushed rock is the used backfill alternative, gypsum and cement are the materials with the largest quantities remaining in the

Quantities of natural gas transmitted in January-December 2012. Quantities of natural gas transported in January-December 2012

International Nuclear Information System (INIS)

2013-01-01

GRTgaz is a European leader in natural gas transmission, a world expert in gas transmission networks and systems, and an operator firmly committed to the energy transition. It owns and operates the gas transmission network throughout most of France and it manages the transmission network in Germany, thereby helping to ensure correct operation of the French and European gas market. It contributes to the energy security of regional supply systems and performs a public service mission to ensure the continuity of consumer supply. This document presents the monthly key figures of GRTgaz activity in 2012: Total quantities transmitted by GRTgaz (Inputs to the GRTgaz network/Outputs from the GRTgaz network); Maximum and minimum daily flow (Daily quantities transported, Daily consumption, Daily inputs excluding storage); Quantities exchanged on the wholesale market; Consumption on the GRTgaz Network (gross monthly consumption and Average monthly temperatures)

Manufacturing fuel-switching capability, 1988

International Nuclear Information System (INIS)

1991-09-01

Historically, about one-third of all energy consumed in the United States has been used by manufacturers. About one-quarter of manufacturing energy is used as feedstocks and raw material inputs that are converted into nonenergy products; the remainder is used for its energy content. During 1988, the most recent year for which data are available, manufacturers consumed 15.5 quadrillion British thermal units (Btu) of energy to produce heat and power and to generate electricity. The manufacturing sector also has widespread capabilities to switch from one fuel to another for either economic or emergency reasons. There are numerous ways to define fuel switching. For the purposes of the Manufacturing Energy Consumption Survey (MECS), fuel switching is defined as the capability to substitute one energy source for another within 30 days with no significant modifications to the fuel-consuming equipment, while keeping production constant. Fuel-switching capability allows manufacturers substantial flexibility in choosing their mix of energy sources. The consumption of a given energy source can be maximized if all possible switching into that energy source takes place. The estimates in this report are based on data collected on the 1988 Manufacturing Energy Consumption Survey (MECS), Forms 846 (A through C). The EIA conducts this national sample survey of manufacturing energy consumption on a triennial basis. The MECS is the only comprehensive source of national-level data on energy-related information for the manufacturing industries. The MECS was first conducted in 1986 to collect data for 1985. This report presents information on the fuel-switching capabilities of manufacturers in 1988. This report is the second of a series based on the 1988 MECS. 8 figs., 31 tabs

Manufacturing fuel-switching capability, 1988

Energy Technology Data Exchange (ETDEWEB)

1991-09-01

Historically, about one-third of all energy consumed in the United States has been used by manufacturers. About one-quarter of manufacturing energy is used as feedstocks and raw material inputs that are converted into nonenergy products; the remainder is used for its energy content. During 1988, the most recent year for which data are available, manufacturers consumed 15.5 quadrillion British thermal units (Btu) of energy to produce heat and power and to generate electricity. The manufacturing sector also has widespread capabilities to switch from one fuel to another for either economic or emergency reasons. There are numerous ways to define fuel switching. For the purposes of the Manufacturing Energy Consumption Survey (MECS), fuel switching is defined as the capability to substitute one energy source for another within 30 days with no significant modifications to the fuel-consuming equipment, while keeping production constant. Fuel-switching capability allows manufacturers substantial flexibility in choosing their mix of energy sources. The consumption of a given energy source can be maximized if all possible switching into that energy source takes place. The estimates in this report are based on data collected on the 1988 Manufacturing Energy Consumption Survey (MECS), Forms 846 (A through C). The EIA conducts this national sample survey of manufacturing energy consumption on a triennial basis. The MECS is the only comprehensive source of national-level data on energy-related information for the manufacturing industries. The MECS was first conducted in 1986 to collect data for 1985. This report presents information on the fuel-switching capabilities of manufacturers in 1988. This report is the second of a series based on the 1988 MECS. 8 figs., 31 tabs.

Cyclotron Production of Technetium-99m

Science.gov (United States)

Gagnon, Katherine M.

Technetium-99m (99mTc) has emerged as the most widely used radionuclide in medicine and is currently obtained from a 99Mo/ 99mTc generator system. At present, there are only a handful of ageing reactors worldwide capable of producing large quantities of the parent isotope, 99Mo, and owing to the ever growing shutdown periods for maintenance and repair of these ageing reactors, the reliable supply 99mTc has been compromised in recent years. With an interest in alternative strategies for producing this key medical isotope, this thesis focuses on several technical challenges related to the direct cyclotron production of 99mTc via the 100Mo(p,2n)99mTc reaction. In addition to evaluating the 100Mo(p,2n)99mTc and 100Mo(p,x)99Mo reactions, this work presented the first experimental evaluation of the 100Mo(p,2n) 99gTc excitation function in the range of 8-18 MeV. Thick target calculations suggested that large quantities of cyclotron-produced 99mTc may be possible. For example, a 6 hr irradiation at 500 μA with an energy window of 18→10 MeV is expected to yield 1.15 TBq of 99mTc. The level of coproduced 99gTc contaminant was found to be on par with the current 99Mo/99mTc generator standard eluted with a 24 hr frequency. Highly enriched 100Mo was required as the target material for 99mTc production and a process for recycling of this expensive material is presented. An 87% recovery yield is reported, including metallic target preparation, irradiation, 99mTc extraction, molybdate isolation, and finally hydrogen reduction to the metal. Further improvements are expected with additional optimization experiments. A method for forming structurally stable metallic molybdenum targets has also been developed. These targets are capable of withstanding more than a kilowatt of beam power and the reliable production and extraction of Curie quantities of 99mTc has been demonstrated. With the end-goal of using the cyclotron-produced 99mTc clinically, the quality of the cyclotron

NGNP Data Management and Analysis System Analysis and Web Delivery Capabilities

Energy Technology Data Exchange (ETDEWEB)

Cynthia D. Gentillon

2011-09-01

Projects for the Very High Temperature Reactor (VHTR) Technology Development Office provide data in support of Nuclear Regulatory Commission licensing of the very high temperature reactor. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high-temperature and high-fluence environments. The NGNP Data Management and Analysis System (NDMAS) at the Idaho National Laboratory has been established to ensure that VHTR data are (1) qualified for use, (2) stored in a readily accessible electronic form, and (3) analyzed to extract useful results. This document focuses on the third NDMAS objective. It describes capabilities for displaying the data in meaningful ways and for data analysis to identify useful relationships among the measured quantities. The capabilities are described from the perspective of NDMAS users, starting with those who just view experimental data and analytical results on the INL NDMAS web portal. Web display and delivery capabilities are described in detail. Also the current web pages that show Advanced Gas Reactor, Advanced Graphite Capsule, and High Temperature Materials test results are itemized. Capabilities available to NDMAS developers are more extensive, and are described using a second series of examples. Much of the data analysis efforts focus on understanding how thermocouple measurements relate to simulated temperatures and other experimental parameters. Statistical control charts and correlation monitoring provide an ongoing assessment of instrument accuracy. Data analysis capabilities are virtually unlimited for those who use the NDMAS web data download capabilities and the analysis software of their choice. Overall, the NDMAS provides convenient data analysis and web delivery capabilities for studying a very large and rapidly increasing database of well-documented, pedigreed data.

Kokkos' Task DAG Capabilities.

Energy Technology Data Exchange (ETDEWEB)

Edwards, Harold C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Ibanez, Daniel Alejandro [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-09-01

This report documents the ASC/ATDM Kokkos deliverable "Production Portable Dy- namic Task DAG Capability." This capability enables applications to create and execute a dynamic task DAG ; a collection of heterogeneous computational tasks with a directed acyclic graph (DAG) of "execute after" dependencies where tasks and their dependencies are dynamically created and destroyed as tasks execute. The Kokkos task scheduler executes the dynamic task DAG on the target execution resource; e.g. a multicore CPU, a manycore CPU such as Intel's Knights Landing (KNL), or an NVIDIA GPU. Several major technical challenges had to be addressed during development of Kokkos' Task DAG capability: (1) portability to a GPU with it's simplified hardware and micro- runtime, (2) thread-scalable memory allocation and deallocation from a bounded pool of memory, (3) thread-scalable scheduler for dynamic task DAG, (4) usability by applications.

Supply capability creation process: Key milestone criteria and activities

Directory of Open Access Journals (Sweden)

Jordan Verrollot

2017-09-01

Full Text Available Purpose: The article focuses on supply capability creation (SCC within the new product development (NPD. The purpose is to establish an SCC process describing the main SCC activities and milestone criteria in preparing the supply process for new products Design/methodology/approach: The article analyses the earlier research, carries out current state analysis of six case companies regarding the SCC areas, and proposes a SCC process. Findings: The developed SCC process aims at preparing the operational supply capability for a developed new product based on the preferred, qualified and contracted suppliers and materials along the NPD process, and ultimately at the product ramp-up. Originality/value: This paper introduces a SCC process that has not been presented earlier in the literature, highlighting the important role of the SCC for successful product ramp-ups.

Quantity discrimination in wolves (Canis lupus

Directory of Open Access Journals (Sweden)

Ewelina eUtrata

2012-11-01

Full Text Available Quantity discrimination has been studied extensively in different non-human animal species. In the current study, we tested eleven hand-raised wolves (Canis lupus in a two-way choice task. We placed a number of food items (one to four sequentially into two opaque cans and asked the wolves to choose the larger amount. Moreover, we conducted two additional control conditions to rule out non-numerical properties of the presentation that the animals might have used to make the correct choice. Our results showed that wolves are able to make quantitative judgments at the group, but also at the individual level even when alternative strategies such as paying attention to the surface area or time and total amount are ruled out. In contrast to previous canine studies on dogs (Canis familiaris and coyotes (Canis latrans, our wolves’ performance did not improve with decreasing ratio, referred to as Weber’s law. However, further studies using larger quantities than we used in the current setup are still needed to determine whether and when wolves’ quantity discrimination conforms to Weber’s law.

NGNP Data Management and Analysis System Modeling Capabilities

Energy Technology Data Exchange (ETDEWEB)

Cynthia D. Gentillon

2009-09-01

Projects for the very-high-temperature reactor (VHTR) program provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. In addition, thermal-hydraulic experiments are conducted to validate codes used to assess reactor safety. The VHTR Program has established the NGNP Data Management and Analysis System (NDMAS) to ensure that VHTR data are (1) qualified for use, (2) stored in a readily accessible electronic form, and (3) analyzed to extract useful results. This document focuses on the third NDMAS objective. It describes capabilities for displaying the data in meaningful ways and identifying relationships among the measured quantities that contribute to their understanding.

NGNP Data Management and Analysis System Modeling Capabilities

International Nuclear Information System (INIS)

Gentillon, Cynthia D.

2009-01-01

Projects for the very-high-temperature reactor (VHTR) program provide data in support of Nuclear Regulatory Commission licensing of the VHTR. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high temperature and high fluence environments. In addition, thermal-hydraulic experiments are conducted to validate codes used to assess reactor safety. The VHTR Program has established the NGNP Data Management and Analysis System (NDMAS) to ensure that VHTR data are (1) qualified for use, (2) stored in a readily accessible electronic form, and (3) analyzed to extract useful results. This document focuses on the third NDMAS objective. It describes capabilities for displaying the data in meaningful ways and identifying relationships among the measured quantities that contribute to their understanding.

Layer-Mean Quantities, Local Conservation Laws, and Vorticity

International Nuclear Information System (INIS)

Camassa, R.; Levermore, C.D.

1997-01-01

We derive local conservation laws for layer-mean quantities in two general settings. When applied to Euler flows, the first of these settings yields well-known local conservation laws for quantities averaged between material surfaces. The second, however, leads to new local conservation laws for quantities involving the vorticity that are averaged between arbitrary surfaces. These produce the crucial vorticity conservation laws in shallow water models that admit nonhydrostatic and noncolumnar motion. Moreover, they seem to lie outside the Hamiltonian paradigm of fluid dynamics. The formalism generalizes to skew-symmetric matrix fields; applications to electromagnetism are suggested. copyright 1997 The American Physical Society

Aluminium production

International Nuclear Information System (INIS)

Winter, B.; Ayers, J.; Sammer, G.

2001-01-01

Aluminium is the most important non-ferrous metal by quantity. Aluminium is produced by electrolysis of aluminium oxide (also known as alumina). Alumina is produced by refining bauxite. The quantity of primary and secondary aluminium production in ECE-countries between 1992 and 1998 is shown. The European aluminium industry employs approximately 200 000 employees. The annual aluminium production in the European Union was 3.58 million tonnes in 1994, of which 44 % was secondary aluminium. In 1996 3.96 million tonnes of aluminium were produced in the EU, of which 44 % was secondary aluminium. (author)

Produção de biomassa e teor de macronutrientes do milheto, feijão-de-porco e guandu-anão em cultivo solteiro e consorciado Biomass production and macronutrients quantity of millet, jack bean, guandu single and in intercropping

Directory of Open Access Journals (Sweden)

Cícero Monti Teixeira

2005-02-01

Full Text Available Objetivou-se determinar a produção de biomassa e o teor de macronutrientes do milheto (Pennisetum typhoides (Burm. Stapf, feijão-de-porco (Canavalia ensiformes (L. DC. e guandu-anão (Cajanus cajan (L. Millsp. em cultivo solteiro e nos consórcios da gramínea com as leguminosas, visando a produção de palha no sistema plantio direto. O trabalho foi conduzido no campo experimental do Departamento de Agricultura da Universidade Federal de Lavras (Lavras, MG, Brasil. O delineamento foi o de blocos casualizados, com cinco tratamentos e quatro repetições. Apenas o guandu-anão solteiro apresentou menor produção de fitomassa fresca e seca, sendo que os demais tratamentos não diferiram entre si, pelo teste de Tukey a 5% de probabilidade. De forma geral, as leguminosas apresentaram maiores teores de N e Ca e o milheto maiores teores de S. Apenas o feijão-de-porco solteiro apresentou menor teor de P. Os maiores teores de K foram apresentados pelo milheto solteiro e consorciado com as leguminosas e pelo feijão-de-porco em consórcio com milheto. Os menores teores de Mg foram verificados para o guandu-anão.The object of this work was to evaluate the biomass production and the macronutrients quantity of millet (Pennisetum typhoides (Burm. Stapf, jack bean (Canavalia ensiformes (L. DC., guandu (Cajanus cajan, (L. Millsp. dwarf cultivar, and the millet with leguminous consortiums to straw production in no-tillage system. The experiment was carried in experimental area at Agriculture Department of the Federal University of Lavras (Lavras, Minas Gerais state, Brazil. The experimental design was randomized blocks, with five treatments and four replications. For biomass production, only the guandu presented smaller fresh and dry biomass yield than the other treatments. In general, the leguminous presented the greatest N and Ca quantities and millet the greatest quantities of S. Only jack bean presented minor P quantity. For K the greatest quantities

The Radiometric Measurement Quantity for SAR Images

OpenAIRE

Döring, Björn J.; Schwerdt, Marco

2013-01-01

A Synthetic Aperture Radar (SAR) system measures among other quantities the terrain radar reflectivity. After image calibration, the pixel intensities are commonly expressed in terms of radar cross sections (for point targets) or as backscatter coefficients (for distributed targets), which are directly related. This paper argues that pixel intensities are not generally proportional to radar cross section or derived physical quantities. The paper further proposes to replace the inaccurate term...

Average Transverse Momentum Quantities Approaching the Lightfront

OpenAIRE

Boer, Daniel

2015-01-01

In this contribution to Light Cone 2014, three average transverse momentum quantities are discussed: the Sivers shift, the dijet imbalance, and the $p_T$ broadening. The definitions of these quantities involve integrals over all transverse momenta that are overly sensitive to the region of large transverse momenta, which conveys little information about the transverse momentum distributions of quarks and gluons inside hadrons. TMD factorization naturally suggests alternative definitions of su...

Modeling and control design of hydrogen production process for an active hydrogen/wind hybrid power system

Energy Technology Data Exchange (ETDEWEB)

Zhou, Tao; Francois, Bruno [L2EP, Ecole Centrale de Lille, Cite Scientifique, BP48, 59651, Villeneuve d' Ascq (France)

2009-01-15

This paper gives a control oriented modeling of an electrolyzer, as well as the ancillary system for the hydrogen production process. A Causal Ordering Graph of all necessary equations has been used to illustrate the global scheme for an easy understanding. The model is capable of characterizing the relations among the different physical quantities and can be used to determine the control system ensuring efficient and reliable operation of the electrolyzer. The proposed control method can manage the power flow and the hydrogen flow. The simulation results have highlighted the variation domains and the relations among the different physical quantities. The model has also been experimentally tested in real time with a Hardware-In-the-Loop Simulation before being integrated in the test bench of the active wind energy conversion system. (author)

PROVING THE CAPABILITY FOR LARGE SCALE REGIONAL LAND-COVER DATA PRODUCTION BY SELF-FUNDED COMMERCIAL OPERATORS

Directory of Open Access Journals (Sweden)

M. W. Thompson

2017-11-01

Full Text Available For service providers developing commercial value-added data content based on remote sensing technologies, the focus is to typically create commercially appropriate geospatial information which has downstream business value. The primary aim being to link locational intelligence with business intelligence in order to better make informed decisions. From a geospatial perspective this locational information must be relevant, informative, and most importantly current; with the ability to maintain the information timeously into the future for change detection purposes. Aligned with this, GeoTerraImage has successfully embarked on the production of land-cover/land-use content over southern Africa. The ability for a private company to successfully implement and complete such an exercise has been the capability to leverage the combined advantages of cutting edge data processing technologies and methodologies, with emphasis on processing repeatability and speed, and the use of a wide range of readily available imagery. These production workflows utilise a wide range of integrated procedures including machine learning algorithms, innovative use of non-specialists for sourcing of reference data, and conventional pixel and object-based image classification routines, and experienced/expert landscape interpretation. This multi-faceted approach to data produce development demonstrates the capability for SMME level commercial entities such as GeoTerraImage to generate industry applicable large data content, in this case, wide area coverage land-cover and land-use data across the sub-continent. Within this development, the emphasis has been placed on the key land-use information, such as mining, human settlements, and agriculture, given the importance of this geo-spatial land-use information in business and socio-economic applications and decision making.

Forage quantity and quality

Science.gov (United States)

Jorgenson, Janet C.; Udevitz, Mark S.; Felix, Nancy A.; Douglas, David C.; Reynolds, Patricia E.; Rhode, E.B.

2002-01-01

The Porcupine caribou herd has traditionally used the coastal plain of the Arctic National Wildlife Refuge, Alaska, for calving. Availability of nutritious forage has been hypothesized as one of the reasons the Porcupine caribou herd migrates hundreds of kilometers to reach the coastal plain for calving (Kuropat and Bryant 1980, Russell et al. 1993).Forage quantity and quality and the chronology of snowmelt (which determines availability and phenological stages of forage) have been suggested as important habitat attributes that lead calving caribou to select one area over another (Lent 1980, White and Trudell 1980, Eastland et al. 1989). A major question when considering the impact of petroleum development is whether potential displacement of the caribou from the 1002 Area to alternate calving habitat will limit access to high quantity and quality forage.Our study had the following objectives: 1) quantify snowmelt patterns by area; 2) quantify relationships among phenology, biomass, and nutrient content of principal forage species by vegetation type; and 3) determine if traditional concentrated calving areas differ from adjacent areas with lower calving densities in terms of vegetation characteristics.

Trade-offs in size, quantity and reliability of generalized nuclear power plants

International Nuclear Information System (INIS)

Hill, D.; Mubayi, V.

1987-01-01

In the 1960's and 1970's, there was rapid growth in the size of newly started nuclear power plants because of the anticipated advantages of increasing scale. Any such advantages were overwhelmed by the complications that arose with long construction times, and attention is now being given to a ''second generation'' of smaller plants of new design. Providing the same production capacity will require larger numbers of plants if they are smaller. Although it seems to have received little attention previously, there should be compensating economies due to ''learning curve'' effects in the manufacture of multiple units of standardized designs (Hill 1983). Moreover, the use of a large number of smaller units increases the overall system reliability. On balance, however, it is not clear how scale, quantity, and reliability considerations interact to determine optimal plant size. The purpose of this paper is to begin examining the size-quantity tradeoff taking into account scale effects, the manufacturing learning curve, plant availability, and system reliability

Solid targets for 99mTc production on medical cyclotrons

International Nuclear Information System (INIS)

Hanemaayer, V.; Buckley, K.R.; Klug, J.; Ruth, T.J.; Schaffer, P.; Zeisler, S.K.; Benard, F.; Kovacs, M.; Leon, C.

2014-01-01

Recent disruptions in the molybdenum-technetium generator supply chain prompted a review of non-reactor based production methods for both 99 Mo and 99m Tc. Small medical cyclotrons (E p ∼ 16-24 MeV) are capable of producing Curie quantities of 99m Tc from isotopically enriched 100 Mo using the 100 Mo(p,2n) 99m Tc reaction. Unlike most other metallic target materials for routine production of medical radioisotopes, molybdenum cannot be deposited by reductive electroplating from aqueous salt solutions. To overcome this issue, we developed a new process for solid molybdenum targets based on the electrophoretic deposition of fine 100 Mo powder onto a tantalum plate, followed by high temperature sintering. The targets obtained were mechanically robust and thermally stable when irradiated with protons at high power density. (author)

Biodiesel production and antioxidant capability from seeds of salicornia begelovii collected from al jubail, eastern province, saudi arabia

International Nuclear Information System (INIS)

Rashed, S.A.; Ibrahim, M.M.; Hatata, M.A.

2016-01-01

Salicornia begelovii Torr displays excessive biotechnological prospective as a salt-water irrigated crop. Qualitative and quantitative compositions of fatty acids were analyzed in the seeds of Salicornia begelovii collected from the eastern region, Al Jubail, Saudi Arabia. Hexane extraction of the seed oil from Salicornia begelovii yielded 29% of total lipids. The GC-MS (Gas Chromatography-Mass Spectroscopy) investigation of the hexane extracts revealed five major peaks for the seed oil: 72.5 wt.% linoleic-6 acid (18:2), 7.4 wt.% palmitic acid (16:0), 13.3 wt.% oleic acid (18:1), 2.14 wt.% stearic acid (18:0) and 2.3 wt.% linolenic-3 acid (18:3). The quantity of the both saturated palmitic and stearic acids amounted (9.18%) in S. begelovii seed oil. The antioxidant capability of S. begelovii seed oil were determined and expressed by hydroxyl radical scavenging assay, nitric oxide (NO) scavenging activity and radical scavenging effects of the extract on DPPH free radical were studied. The composition of the oil was nutritive and medical health value was high, in addition to, it's composition very similar to that of safflower oil. No unwanted fatty acid constituents were established in S. begelovii seed oil, and it could be suggested for biofuel fabrication. (author)

The Sweet Escape: Effects of Mortality Salience on Consumption Quantities for High- and Low-Self-Esteem Consumers

NARCIS (Netherlands)

N. Mandel (Naomi); D.H.R.V. Smeesters (Dirk)

2008-01-01

textabstractThis research demonstrates that exposure to death-related stimuli can increase consumers' amounts of purchasing and consumption. We demonstrate that consumers who have been recently reminded of their own impending mortality wish to purchase higher quantities of food products (and

A conserved quantity in thin body dynamics

Science.gov (United States)

Hanna, J. A.; Pendar, H.

2016-02-01

Thin, solid bodies with metric symmetries admit a restricted form of reparameterization invariance. Their dynamical equilibria include motions with both rigid and flowing aspects. On such configurations, a quantity is conserved along the intrinsic coordinate corresponding to the symmetry. As an example of its utility, this conserved quantity is combined with linear and angular momentum currents to construct solutions for the equilibria of a rotating, flowing string, for which it is akin to Bernoulli's constant.

Structural Capability of an Organization toward Innovation Capability

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev; Momeni, Mostafa

2016-01-01

The scholars in the field of strategic management have developed two major approaches for attainment of competitive advantage: an approach based on environmental opportunities, and another one based on internal capabilities of an organization. Some investigations in the last two decades have...... indicated that the advantages relying on the internal capabilities of organizations may determine the competitive position of organizations better than environmental opportunities do. Characteristics of firms shows that one of the most internal capabilities that lead the organizations to the strongest...... competitive advantage in the organizations is the innovation capability. The innovation capability is associated with other organizational capabilities, and many organizations have focused on the need to identify innovation capabilities.This research focuses on recognition of the structural aspect...

Relationships of chemical composition, quantity of milt to fertility and ...

African Journals Online (AJOL)

African Journal of Food, Agriculture, Nutrition and Development ... determining the right quantity of milt that can be used to fertilize certain quantity of eggs. ... quantity of milt used for artificial reproduction in fish significantly affect water quality used ... is the major organic substance that supplies the spermatozoa with energy.

Six categories of ionizing radiation quantities practical in various fields

International Nuclear Information System (INIS)

Zheng Junzheng; Zhuo Weihai

2011-01-01

This paper is the part of review on the evolvement of the systems for ionizing radiation quantities and units. In the paper, for better understanding and correct use of the relevant quantities of ionizing radiation, the major ionizing radiation quantities in various fields are divided into six categories. (authors)

Lie-Mei symmetry and conserved quantities of the Rosenberg problem

International Nuclear Information System (INIS)

Liu Xiao-Wei; Li Yuan-Cheng

2011-01-01

The Rosenberg problem is a typical but not too complicated problem of nonholonomic mechanical systems. The Lie—Mei symmetry and the conserved quantities of the Rosenberg problem are studied. For the Rosenberg problem, the Lie and the Mei symmetries for the equation are obtained, the conserved quantities are deduced from them and then the definition and the criterion for the Lie—Mei symmetry of the Rosenberg problem are derived. Finally, the Hojman conserved quantity and the Mei conserved quantity are deduced from the Lie—Mei symmetry. (general)

Lie-Mei symmetry and conserved quantities of the Rosenberg problem

Science.gov (United States)

Liu, Xiao-Wei; Li, Yuan-Cheng

2011-07-01

The Rosenberg problem is a typical but not too complicated problem of nonholonomic mechanical systems. The Lie—Mei symmetry and the conserved quantities of the Rosenberg problem are studied. For the Rosenberg problem, the Lie and the Mei symmetries for the equation are obtained, the conserved quantities are deduced from them and then the definition and the criterion for the Lie—Mei symmetry of the Rosenberg problem are derived. Finally, the Hojman conserved quantity and the Mei conserved quantity are deduced from the Lie—Mei symmetry.

Optimal trading quantity integration as a basis for optimal portfolio management

Directory of Open Access Journals (Sweden)

Saša Žiković

2005-06-01

Full Text Available The author in this paper points out the reason behind calculating and using optimal trading quantity in conjunction with Markowitz’s Modern portfolio theory. In the opening part the author presents an example of calculating optimal weights using Markowitz’s Mean-Variance approach, followed by an explanation of basic logic behind optimal trading quantity. The use of optimal trading quantity is not limited to systems with Bernoulli outcome, but can also be used when trading shares, futures, options etc. Optimal trading quantity points out two often-overlooked axioms: (1 a system with negative mathematical expectancy can never be transformed in a system with positive mathematical expectancy, (2 by missing the optimal trading quantity an investor can turn a system with positive expectancy into a negative one. Optimal trading quantity is that quantity which maximizes geometric mean (growth function of a particular system. To determine the optimal trading quantity for simpler systems, with a very limited number of outcomes, a set of Kelly’s formulas is appropriate. In the conclusion the summary of the paper is presented.

Quantity-split strategy under two-contractor competitive procurement environment

OpenAIRE

Boger, Dan C.; Liao, Shu S.

1988-01-01

This report discusses the various market scenarios that provide bid price manipulation opportunities under the dual source competition environment. Two different quantity-split strategies were developed one for the case when one of the suppliers does not have the capacity to produce the majority of the annual quantity requirement and the other for the case when neither contractor is interested in using low prices to capture the larger share of annual quantity. Keywords: Dual sourcing, Quantit...

A Semi-Vectorization Algorithm to Synthesis of Gravitational Anomaly Quantities on the Earth

Science.gov (United States)

Abdollahzadeh, M.; Eshagh, M.; Najafi Alamdari, M.

2009-04-01

The Earth's gravitational potential can be expressed by the well-known spherical harmonic expansion. The computational time of summing up this expansion is an important practical issue which can be reduced by an efficient numerical algorithm. This paper proposes such a method for block-wise synthesizing the anomaly quantities on the Earth surface using vectorization. Fully-vectorization means transformation of the summations to the simple matrix and vector products. It is not a practical for the matrices with large dimensions. Here a semi-vectorization algorithm is proposed to avoid working with large vectors and matrices. It speeds up the computations by using one loop for the summation either on degrees or on orders. The former is a good option to synthesize the anomaly quantities on the Earth surface considering a digital elevation model (DEM). This approach is more efficient than the two-step method which computes the quantities on the reference ellipsoid and continues them upward to the Earth surface. The algorithm has been coded in MATLAB which synthesizes a global grid of 5′Ã- 5′ (corresponding 9 million points) of gravity anomaly or geoid height using a geopotential model to degree 360 in 10000 seconds by an ordinary computer with 2G RAM.

Artificial intelligence for Space Station automation: Crew safety, productivity, autonomy, augmented capability

Science.gov (United States)

Firschein, O.; Georgeff, M. P.; Park, W.; Cheeseman, P. C.; Geldberg, J.

1986-01-01

Artificial intelligence (AI) R&D projects for the successful and efficient operation of the Space Station are described. The book explores the most advanced AI-based technologies, reviews the results of concept design studies to determine required AI capabilities, details demonstrations that would indicate the existence of these capabilities, and develops an R&D plan leading to such demonstrations. Particular attention is given to teleoperation and robotics, sensors, expert systems, computers, planning, and man-machine interface.

Editorial: New operational dose equivalent quantities

International Nuclear Information System (INIS)

Harvey, J.R.

1985-01-01

The ICRU Report 39 entitled ''Determination of Dose Equivalents Resulting from External Radiation Sources'' is briefly discussed. Four new operational dose equivalent quantities have been recommended in ICRU 39. The 'ambient dose equivalent' and the 'directional dose equivalent' are applicable to environmental monitoring and the 'individual dose equivalent, penetrating' and the 'individual dose equivalent, superficial' are applicable to individual monitoring. The quantities should meet the needs of day-to-day operational practice, while being acceptable to those concerned with metrological precision, and at the same time be used to give effective control consistent with current perceptions of the risks associated with exposure to ionizing radiations. (U.K.)

Comparison of hydrogen-production capability of four different Enterobacteriaceae strains under growing and non-growing conditions

Energy Technology Data Exchange (ETDEWEB)

Seol, Eunhee; Kim, Seohyoung; Raj, S. Mohan; Park, Sunghoon [Department of Chemical and Biochemical Engineering, Pusan National University, Busan 609-735 (Korea)

2008-10-15

Non-growing cells can function as whole-cell biocatalysts for hydrogen (H{sub 2}) production, a process that has recently drawn much attention. In order to evaluate their potential as whole-cell biocatalysts, we compared the H{sub 2}-production capability of four Enterobacteriaceae strains (Citrobacter amalonaticus Y19, Escherichia coli K-12 MG1655, Escherichia coli DJT135, and Enterobacter aerogenes) under growing and non-growing conditions. We evaluated their H{sub 2}-production activity at varying temperatures (25-45 C) and pH conditions (6.0-8.0) using glucose or formate as the carbon source. Under growing conditions with 10 mM glucose as a substrate, E. aerogenes exhibited the highest H{sub 2}-production activity (17.0 {+-} 0.2 {mu}mol H{sub 2} mg cell{sup -1} h{sup -1}) among the four strains, but the final H{sub 2} yield was similar (1.7-1.8 mol H{sub 2} mol{sup -1} glucose) in all four strains. H{sub 2} production in the four strains proceeded through a formate-dependent pathway that involved the formate hydrogen lyase (FHL) complex. Under non-growing conditions with 20 mM formate as a substrate, we obtained high H{sub 2}-production activities, in the range of 95.5-195.2 {mu}mol H{sub 2} mg cell{sup -1} h{sup -1}, with E. coli DJT135 exhibiting the highest activity (195.2 {mu}mol H{sub 2} mg{sup -1} h{sup -1}) at pH 6.0 and 45 C. In contrast, using glucose as the carbon substrate in non-growing cell experiments greatly reduced the H{sub 2}-production activity to 6.1-7.7 {mu}mol H{sub 2} mg cell{sup -1} h{sup -1}. This study indicated that formate is a better substrate than glucose for H{sub 2} production by non-growing cells, and that the H{sub 2}-production performance among the strains did not vary significantly, with the exception of E. coli K-12 MG1655. (author)

Glove box operations for transplutonium element production

International Nuclear Information System (INIS)

Knauer, J.B.; Alexander, C.W.; Wiggins, J.T.

1986-01-01

Glove boxes are used in the Transuranium Processing Plant (TRU) at Oak Ridge National Laboratory for (1) completing the final chemical processing steps to isolate and purify the transplutonium elements, (2) packaging transplutonium elements for shipment, (3) preirradiation and postirradiation processing of samples used to produce special transplutonium isotopes in the High Flux Isotope Reactor (HFIR), and (4) conducting special projects, which include providing highly purified transplutonium products in special chemical forms and/or in experimental devices as requested by researchers. During 20 years of operation, the quantities of transplutonium elements produced, and thus the amount of radioactivity handled, have continually increased. At the same time, substantial effort has been expended to reduce personnel radiation exposures. Equipment and techniques have been developed to maintain the desired operational capabilities in the glove boxes while keeping radiation exposures to operating personnel as low as reasonably achievable. Developments have included the design and fabrication of product handling and collection devices, product storage containers, and laminated exterior shields of lead glass, lead acrylic, acrylic sheets, polyethylene, and lead

48 CFR 245.7309-8 - Variations in quantity or weight.

Science.gov (United States)

2010-10-01

... Inventory 245.7309-8 Variations in quantity or weight. When property is sold on a “unit price” basis, the Contractor reserves the right to vary by up to 15 percent the quantity or weight listed in the Invitation and... price shall be adjusted in accordance with the unit price and on the basis of the quantity or weight...

Towards predicting the encoding capability of MR fingerprinting sequences.

Science.gov (United States)

Sommer, K; Amthor, T; Doneva, M; Koken, P; Meineke, J; Börnert, P

2017-09-01

Sequence optimization and appropriate sequence selection is still an unmet need in magnetic resonance fingerprinting (MRF). The main challenge in MRF sequence design is the lack of an appropriate measure of the sequence's encoding capability. To find such a measure, three different candidates for judging the encoding capability have been investigated: local and global dot-product-based measures judging dictionary entry similarity as well as a Monte Carlo method that evaluates the noise propagation properties of an MRF sequence. Consistency of these measures for different sequence lengths as well as the capability to predict actual sequence performance in both phantom and in vivo measurements was analyzed. While the dot-product-based measures yielded inconsistent results for different sequence lengths, the Monte Carlo method was in a good agreement with phantom experiments. In particular, the Monte Carlo method could accurately predict the performance of different flip angle patterns in actual measurements. The proposed Monte Carlo method provides an appropriate measure of MRF sequence encoding capability and may be used for sequence optimization. Copyright © 2017 Elsevier Inc. All rights reserved.

Nuclear energy - Reference beta-particle radiation - Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field

International Nuclear Information System (INIS)

2004-01-01

ISO 6980 consists of the following parts, under the general title Nuclear energy - Reference beta-particle radiation: Part 1: Method of production; Part 2: Calibration fundamentals related to basic quantities characterizing the radiation field; Part 3: Calibration of area and personal dosimeters and determination of their response as a function of energy and angle of incidence. This part 2 of ISO 6980 specifies methods for the measurement of the directional absorbed-dose rate in a tissue-equivalent slab phantom in the ISO 6980 reference beta-particle radiation fields. The energy range of the beta-particle-emitting isotopes covered by these reference radiations is 0.066 to 3.54 MeV (maximum energy). Radiation energies outside this range are beyond the scope of this standard. While measurements in a reference geometry (depth of 0.07 mm at perpendicular incidence in a tissue-equivalent slab phantom) with a reference class extrapolation chamber are dealt with in detail, the use of other measurement systems and measurements in other geometries are also described, although in less detail. The ambient dose equivalent, H*(10) as used for area monitoring of strongly penetrating radiation, is not an appropriate quantity for any beta radiation, even for that penetrating a 10 mm thick layer of ICRU tissue (i.e. E max > 2 MeV). If adequate protection is provided at 0.07 mm, only rarely will one be concerned with other depths, for example 3 mm. This document is geared towards organizations wishing to establish reference-class dosimetry capabilities for beta particles, and serves as a guide to the performance of dosimetry with the reference class extrapolation chamber for beta-particle dosimetry in other fields. Guidance is also provided on the statement of measurement uncertainties

Spent nuclear fuel shipping cask handling capabilities of commercial light water reactors

International Nuclear Information System (INIS)

Daling, P.M.; Konzek, G.J.; Lezberg, A.J.; Votaw, E.F.; Collingham, M.I.

1985-04-01

This report describes an evaluation of the cask handling capabilities of those reactors which are operating or under construction. A computerized data base that includes cask handling information was developed with information from the literature and utility-supplied data. The capability of each plant to receive and handle existing spent fuel shipping casks was then evaluated. Modal fractions were then calculated based on the results of these evaluations and the quantities of spent fuel projected to be generated by commercial nuclear power plants through 1998. The results indicated that all plants are capable of receiving and handling truck casks. Up to 118 out of 130 reactors (91%) could potentially handle the larger and heavier rail casks if the maximum capability of each facility is utilized. Design and analysis efforts and physical modifications to some plants would be needed to achieve this high rail percentage. These modifications would be needed to satisfy regulatory requirements, increase lifting capabilities, develop rail access, or improve other deficiencies. The remaining 12 reactors were determined to be capable of handling only the smaller truck casks. The percentage of plants that could receive and handle rail casks in the near-term would be reduced to 64%. The primary reason for a plant to be judged incapable of handling rail casks in the near-term was a lack of rail access. The remaining 36% of the plants would be limited to truck shipments. The modal fraction calculations indicated that up to 93% of the spent fuel accumulated by 1998 could be received at federal storage or disposal facilities via rail (based on each plant's maximum capabilities). If the near-term cask handling capabilities are considered, the rail percentage is reduced to 62%

De novo production of the flavonoid naringenin in engineered Saccharomyces cerevisiae

Directory of Open Access Journals (Sweden)

Koopman Frank

2012-12-01

Full Text Available Abstract Background Flavonoids comprise a large family of secondary plant metabolic intermediates that exhibit a wide variety of antioxidant and human health-related properties. Plant production of flavonoids is limited by the low productivity and the complexity of the recovered flavonoids. Thus to overcome these limitations, metabolic engineering of specific pathway in microbial systems have been envisaged to produce high quantity of a single molecules. Result Saccharomyces cerevisiae was engineered to produce the key intermediate flavonoid, naringenin, solely from glucose. For this, specific naringenin biosynthesis genes from Arabidopsis thaliana were selected by comparative expression profiling and introduced in S. cerevisiae. The sole expression of these A. thaliana genes yielded low extracellular naringenin concentrations ( Conclusion The results reported in this study demonstrate that S. cerevisiae is capable of de novo production of naringenin by coexpressing the naringenin production genes from A. thaliana and optimization of the flux towards the naringenin pathway. The engineered yeast naringenin production host provides a metabolic chassis for production of a wide range of flavonoids and exploration of their biological functions.

Discussion on concepts for radiological dosimetric quantities in the Japan Health Physics Society

International Nuclear Information System (INIS)

Takahashi, Fumiaki; Oda, Keiji

2007-01-01

Many dosimetric quantities have been used for radiation protection purpose. The International Commission on Radiological Protection (ICRP) has recommended protection quantities and the International Commission on Radiation Units and Measurements (ICRU) has introduced operational quantities to provide a reasonable estimate of the protection quantities. Enthusiastic discussions are continuously made on the issues of the dosimetric quantities, such as basic biological data for the definition of these quantities and applicability of the quantities to actual radiation protection practice. At the moment, some changes are being proposed concerning dosimetric quantities in the draft recommendations of ICRP, opened for consultation in recent years. Thus, the Japan Health Physics Society (JHPS) established the Expert Committee on concepts of Dosimetric Quantities used in radiological protection (ECDQ) in April 2005 to reviewed and discuss issues in the dosimetric quantities. (author)

Management of small quantities of radioactive waste

International Nuclear Information System (INIS)

1998-09-01

The main objective of this publication is to provide practical guidance primarily to developing Member States on the predisposal management of small quantities of radioactive waste arising from hospitals, laboratories, industries, institutions, research reactors and research centres.The publication covers the management of liquid, solid and gaseous radioactive wastes at the users' premises and gives general guidance on procedures at a centralized waste management facility. Predisposal management of radioactive waste includes handling, treatment, conditioning, storage and transportation. This publication provides information and guidance on the following topics: national waste management framework; origin and characteristics of radioactive waste arising from users generating small quantities of waste; radioactive waste management concepts appropriate for small quantities; local waste management; the documentation and approval necessary for the consignment of waste to a centralized waste management facility; centralized waste management; exemption of radionuclides from the regulatory body; transportation; environmental monitoring; quality assurance for the whole predisposal process; regional co-operation aspects

Structural determination of nanomolar quantities of neuroactive peptides by nuclear magnetic resonance

Science.gov (United States)

Matei, Elena

The specificity of the conotoxin is one of the attributes that make them a valuable diagnostic tool in the characterization of neuronal mechanisms, or therapeutic agents in medicine. It appears that Nature has provided us with a pharmaceutical tool in the form of Conus peptides. Further studies will only enhance our understanding, and use, of these molecules in medicine and science. The study of three-dimensional structure in relation to the function of cone snail peptides is an area of increasing interest. The venom of a single cone snail can contain as many as 300 different chemical components. Individual cone snail venom components, or conopeptides, can have powerful neurological effects. For many interesting species, not enough venom collected from the natural origin is available for experimental investigations. After a laborious separation procedure, only nanomole quantities of these native conopeptides are able to be obtained. Therefore, several experimental applications, such as NMR spectroscopy, are difficult to carry out using traditional methods. The research was focused on using nanoNMR spectroscopy as an alternative method to the conventional NMR spectroscopy method in order to analyze small quantities of novel peptides with unknown three-dimensional conformational arrangement. The experimental results obtained using the HR-MAS NMR technique, in addition to the use of a 3mm gHCN (with 1.7mm inserts) NMR probes, proved the capability of conformational analysis of different types of natural products at sample levels down to nanomole range. Understanding the interaction between agonist or antagonist ligands and their target receptors, at a molecular level, offer promise for the development of pharmacological therapeutics for the central nervous system. Conopeptides are of great interest as ligands in neuroscience and are valuable leads in drug design, based on their specificity and potency for therapeutically relevant receptors and ion channels. For

Seasonal changes in food quantity and quality of the common North Sea copepods Temora longicornis and Pseudocalanus elongatus: a bioassay approach

DEFF Research Database (Denmark)

Koski, Marja; Dutz, Jörg; Klein Breteler, W.

2010-01-01

We evaluated the food quantity and quality over a seasonal cycle for the development and egg production of the common North Sea copepods Temora longicornis and Pseudocalanus elongatus, using a bioassay approach. Seston was sampled from December to October from a well-mixed water column of the Mar......We evaluated the food quantity and quality over a seasonal cycle for the development and egg production of the common North Sea copepods Temora longicornis and Pseudocalanus elongatus, using a bioassay approach. Seston was sampled from December to October from a well-mixed water column...... with the seston from the spring bloom in March-April. The juveniles of both species were able to complete their development only in spring experiments. A multiple regression analyses and comparison to a good-quality standard food of the same concentration suggested that, in an annual scale, the egg production...

Dosimetric radiation protection quantities. Impact of the forthcoming ICRP recommendations

International Nuclear Information System (INIS)

Pradhan, A.S.; Lee, J.I.; Kim, J.L.; Kim, B.H.

2008-01-01

The physical quantities namely fluence, kerma and absorbed dose provide the base for the operational and the protection quantities. The absorbed dose continues to be the fundamental physical quantity for the radiological protection. The most striking feature relating the quantities in the forthcoming recommendations is the updating of the radiation and tissue weighting factors based on the latest available scientific information on radiobiology and the physics of radiation exposure. This is bound to make a significant impact in arriving at the equivalent doses and effective dose. For external exposures of neutrons, the forthcoming recommendations are going to improve the relationship between the operational and protection quantities. The changes in the tissue weighting factors of some tissues/organs, the inclusion of several new tissues/organs for the consideration of tissue weighting factors and the use of the proposed Reference Male and Reference Female voxel phantoms would require new conversion coefficients and dose coefficients for external and internal exposures. The other striking feature appears to be the details of the concepts to ensure that the protections quantities are used for the appropriate and intended purposes only and the misuse is avoided. (author)

Technological capability assessment of suppliers to support product development: case study on a buses and coaches manufacturer

Directory of Open Access Journals (Sweden)

Lucas Comerlato

2013-05-01

Full Text Available Supply chain management has become a critical issue in the global collaboration scenario. Suppliers are not expected to provide just commodities or pre-defined components, but also collaborative engineering design solutions within the product development cycle. Thus, the selection criteria for defining supply partner go beyond the production and logistic capabilities, but must also include technical and engineering competence. This, in some sense, can be considered a common scenario of big companies, but is still challenging when dealing with SME´s. This work discusses how SME´s can be included in a supply chains taking in consideration a set of parameters to assess their technical competence related to product development collaboration. A set of eight parameters has been proposed to assess the engineering team competence, physical and technological structure and further legal responsibility. For each parameter values and weights were defined also. The assessment was applied to three companies that are suppliers of a buses and coaches manufacturer from Rio Grande do Sul, Brazil. The results show that even when dealing with objective parameters, the suppliers and costumer can have different perceptions about same issues.

Estimating kinetic parameters from dynamic contrast-enhanced T(1)-weighted MRI of a diffusable tracer: standardized quantities and symbols

DEFF Research Database (Denmark)

Tofts, P.S.; Brix, G; Buckley, D.L.

1999-01-01

We describe a standard set of quantity names and symbols related to the estimation of kinetic parameters from dynamic contrast-enhanced T(1)-weighted magnetic resonance imaging data, using diffusable agents such as gadopentetate dimeglumine (Gd-DTPA). These include a) the volume transfer constant K......-limited conditions K(trans) equals the blood plasma flow per unit volume of tissue; under permeability-limited conditions K(trans) equals the permeability surface area product per unit volume of tissue. We relate these quantities to previously published work from our groups; our future publications will refer...

Managing the Newsvendor Modeled Product System with Random Capacity and Capacity-Dependent Price

Directory of Open Access Journals (Sweden)

Qingying Li

2015-01-01

Full Text Available We consider a newsvendor modeled product system, where the firm provides products to the market. The supply capacity of the product is random, so the firm receives either the amount of order quantity or the realized capacity, whichever is smaller. The market price is capacity dependent. We consider two types of production cost structures: the procurement case and the in-house production case. The firm pays for the received quantity in the former case and for the ordered quantity in the latter case. We obtain the optimal order quantities for both cases. Comparing with the traditional newsvendor model, we find that the optimal order quantity in both the procurement case and the in-house production case are no greater than that in the traditional newsvendor model with a fixed selling price. We also find that the optimal order quantity for the procurement case is greater than that for the in-house production case. Numerical study is conducted to investigate the sensitivity of the optimal solution versus the distribution of the random capacity/demand.

Calibration of personal dosimeters: Quantities and terminology

International Nuclear Information System (INIS)

Aleinikov, V.E.

1999-01-01

The numerical results obtained in the interpretation of individual monitoring of external radiation depend not only on the accurate calibration of the radiation measurement instruments involved, but also on the definition of the quantities in term of which these instruments are calibrated The absence of uniformity in terminology not only makes it difficult to understand properly the scientific and technical literature but can also lead to incorrect interpretation of particular concepts and recommendations. In this paper, brief consideration is given to definition of radiation quantities and terminology used in calibration procedures. (author)

The quantity does it? The EEG 2017 and the consequences for the German energy transition

International Nuclear Information System (INIS)

Meya, Jasper N.; Neetzow, Paul; Neubauer, Linda; Pechan, Anna

2016-01-01

The Renewable Energy Sources Act (EEG) has so far been the driving force behind German energy transition and has found many imitators internationally as an effective funding instrument. With the reform of the EEG, which was approved by the Federal Government, the promotion of renewable energies (EE) was shifted from the current price to a quantity control. The present analysis of the impact of the switch to cost-efficiency, the diversity of actors, the achievement of the EE production targets and network consistency shows that the efficiency advantages of tendering may be reduced by higher transaction costs and regional expansion ambitions dampened. The tendered quantities are not sufficient for the long term to increase EE share to the targeted level. It is also doubtful whether a grid-compatible EE expansion is achieved. [de

Progress towards a small-scale, automated optical thin-film production capability

International Nuclear Information System (INIS)

Drage, D.J.; Netterfield, R.P.; Dligatch, S.; Blenman, N.; Fairman, P.S.; Katsaros, A.; Preston, E.W.

2000-01-01

Full text: The Optical Thin-film group at CSIRO Telecommunications and Industrial Physics (CTIP) has, working over a number of years, built up considerable expertise in producing complex dielectric, multilayer thin-film designs to meet unusual and demanding optical performance specifications. At the same time the process of vacuum deposition of dielectric materials has been advanced, particularly by the development and use of ion-assisted deposition (IAD). Proposed modifications to our existing chamber (DB600) and the addition of a new, larger diameter chamber (DD750), presently under construction, will increase output and reliability while improving quality. We will describe the changes already made to the DB600 such as: the gridless ion source, in-situ ellipsometric monitoring along with spectrophotometric monitoring, full e-beam scan on the material source, complete source shuttering and reactive deposition of SiO 2 from thermally evaporated SiO. The effects of making these beneficial changes will be described. Further changes to be made to the DB600 include, replacing its diffusion pump with a cryo-pump and automatic control of the deposition process. All the changes described for the DB600 along with a positive drive system for rotation of the substrate holder, rod feed e-gun hearths, and multiple crystal monitor heads, will be included in the DD750 design which will also be described. We believe that these improvements will give us the capability of small-scale production of reproducible, high quality filters

Definitions of Quantities and Units.

Science.gov (United States)

Spurgin, C. B.

1983-01-01

Compares various methods of defining derived quantities, arguing for a definitional formula using base or fundamental units in a word equation, or symbol-equations with the symbols explained. Suggests that fundamental units be defined operationally or left regarded as intuitive as in the case of length and time. (JM)

Land Capability Evaluation of Upper Sekampung Watersheds

Directory of Open Access Journals (Sweden)

Irwan Sukri Banuwa

2008-05-01

Full Text Available Land degradation is a serious problem in the Upper Sekampung Watersheds. This is because the farmers cultivated in steep land to coffee crops without in adequate soil and water conservation practices. The land degradation is mostly caused by erosion. The erosion problem not only stripping the most fertile top soil and decreasing crop production, but also resulting problems in lowland. Therefore, the reorientation land management should be improved to produce agriculture sustainability. The first step is to evaluated land capability this area. The objectives of the research were evaluate land capability of Upper Sekampung Watersheds. The results showed that the Upper Sekampung Watersheds were dominated with class and subclass land capability of III-l2 about 17.630,51 ha (41,58%. All of the constrain for each land capability in this area is erosion hazard, especially land slope. From this research, cultivated land to coffee base crops were allowed in land capability II-l1.e1, III-l2, IV-l3, and VI-l4, with in adequate soil and water conservation practices. In contrary, the land capability of VII-l5 unsuitable for agriculture, they should be a nature or for conservation forest.

Collaborative environments for capability-based planning

Science.gov (United States)

McQuay, William K.

2005-05-01

Distributed collaboration is an emerging technology for the 21st century that will significantly change how business is conducted in the defense and commercial sectors. Collaboration involves two or more geographically dispersed entities working together to create a "product" by sharing and exchanging data, information, and knowledge. A product is defined broadly to include, for example, writing a report, creating software, designing hardware, or implementing robust systems engineering and capability planning processes in an organization. Collaborative environments provide the framework and integrate models, simulations, domain specific tools, and virtual test beds to facilitate collaboration between the multiple disciplines needed in the enterprise. The Air Force Research Laboratory (AFRL) is conducting a leading edge program in developing distributed collaborative technologies targeted to the Air Force's implementation of systems engineering for a simulation-aided acquisition and capability-based planning. The research is focusing on the open systems agent-based framework, product and process modeling, structural architecture, and the integration technologies - the glue to integrate the software components. In past four years, two live assessment events have been conducted to demonstrate the technology in support of research for the Air Force Agile Acquisition initiatives. The AFRL Collaborative Environment concept will foster a major cultural change in how the acquisition, training, and operational communities conduct business.

Detection Dynamics Of Nitrogen Based Explosive Quantities In Selected Cylindrical Containers

Directory of Open Access Journals (Sweden)

Ngusha Tavershima Almighty

2017-12-01

Full Text Available An experimental set up for examining the variation of detection intensity with explosive quantity has been studied. Containers made from ceramic carbon steel wood and HDPE were filled with explosive masses ranging from 10 kg to 500 kg and irradiated by a 14.1 MeV point isotropic neutron source. The resulting gamma photons were analyzed for their C N and O composition and the sum computed to yield a quantity known as the material quotient MQ. Examination of MQ values indicates an initial increase in detection intensity with increasing explosive quantity. Saturation is however reached at an explosive quantity of about 25kg where detection intensity reduces with further increase in explosive quantity. Effects of variation in explosive quantity appeared to be more pronounced for explosives contained in HDPE and wooden containers and least pronounced for those in steel containers. Source-detector configuration was identified as a major factor affecting effective detection of large masses of explosives.

Workplace stress experienced by quantity surveyors

African Journals Online (AJOL)

Paul (P.A.) Bowen, Department of Construction Economics and Management,. University of Cape Town, Private ..... Explore workplace stress levels among quantity surveyors in the developing nation of ...... London: Free. Association Books.

Radioactivity distribution in phosphate products, by-products, effluents, and wastes

International Nuclear Information System (INIS)

Guimond, R.J.; Windham, S.T.

1975-08-01

Phosphate rock throughout the world contains uranium in concentrations ranging from a few ppM to a few hundred ppM. In the United States, phosphate rock normally contains between 100 to 150 ppM uranium. Mining and processing of these ores redistributes much of the uranium daughters among the various products, by-products, and wastes. These materials are then widely dispersed throughout the environment. This redistribution may lead to increased exposure of the public to these naturally-occurring radionuclides. In determining the magnitude of the population exposure caused by this redistribution and in developing environmental standards and controls to prevent contamination of the biosphere from these naturally-occurring radionuclides it is necessary to determine the concentrations and total quantities of these radionuclides in the products, by-products, effluents and wastes of phosphate mining and manufacturing. Samples of phosphate ores, products, by-products, effluents, and wastes were obtained and analyzed for their radioactivity content. Quantities of radioactivity entering the environment through various products, by-products, effluents, and wastes were estimated

21 CFR 139.150 - Noodle products.

Science.gov (United States)

2010-04-01

... § 139.150 Noodle products. (a) Noodle products are the class of food each of which is prepared by drying... leaf, or any two or more of these, in a quantity which seasons the food. (2) Salt, in a quantity which... in with the common name of the ingredient; or in the case of bay leaves, the statement “Spiced...

Quality and Quantity of Sorghum Hydroponic Fodder from Different Varieties and Harvest Time

Science.gov (United States)

Chrisdiana, R.

2018-02-01

This experiment was designed to compare different varieties and harvest time of sorghum hydroponic fodder based on nutrient content and biomass production. Experimental design for fodder productivity was completely randomized design with 2 x 3 factorial, i.e., sorghum varieties (KD 4 and Super-1) and time of harvesting the sorghum hydroponic fodder (8,12 and 16 d). Total biomass and DM production, were affected significantly (p<0.05) on harvest time. Total biomass and nutrient content were increased in longer harvest time. The nutrient content were increased with decreasing total value of DM. Super-1 varieties produce larger biomass and nutrient content higher than KD4 (p<0.05). Based on sorghum hidroponic fodder quality and quantity, sorghum hidroponic fodder with Super-1 varieties harvested at 12 d had a good quality of fodder and it can be alternative of technology providing quality forage and land saving with a short time planting period and continous production.

Recognizing Prefixes in Scientific Quantities

Science.gov (United States)

Sokolowski, Andrzej

2015-01-01

Although recognizing prefixes in physical quantities is inherent for practitioners, it might not be inherent for students, who do not use prefixes in their everyday life experiences. This deficiency surfaces in AP Physics exams. For example, readers of an AP Physics exam reported "a common mistake of incorrectly converting nanometers to…

30 CFR 75.322 - Harmful quantities of noxious gases.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Harmful quantities of noxious gases. 75.322... quantities of noxious gases. Concentrations of noxious or poisonous gases, other than carbon dioxide, shall... Governmental Industrial Hygienists in “Threshold Limit Values for Substance in Workroom Air” (1972). Detectors...

48 CFR 52.217-6 - Option for Increased Quantity.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Option for Increased....217-6 Option for Increased Quantity. As prescribed in 17.208(d), insert a clause substantially the same as the following: Option for Increased Quantity (MAR 1989) The Government may increase the...

41 CFR 109-27.102 - Economic order quantity principle.

Science.gov (United States)

2010-07-01

... PROCUREMENT 27-INVENTORY MANAGEMENT 27.1-Stock Replenishment § 109-27.102 Economic order quantity principle. ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Economic order quantity principle. 109-27.102 Section 109-27.102 Public Contracts and Property Management Federal Property...

Stakeholder Alignment and Changing Geospatial Information Capabilities

Science.gov (United States)

Winter, S.; Cutcher-Gershenfeld, J.; King, J. L.

2015-12-01

Changing geospatial information capabilities can have major economic and social effects on activities such as drought monitoring, weather forecasts, agricultural productivity projections, water and air quality assessments, the effects of forestry practices and so on. Whose interests are served by such changes? Two common mistakes are assuming stability in the community of stakeholders and consistency in stakeholder behavior. Stakeholder communities can reconfigure dramatically as some leave the discussion, others enter, and circumstances shift — all resulting in dynamic points of alignment and misalignment . New stakeholders can bring new interests, and existing stakeholders can change their positions. Stakeholders and their interests need to be be considered as geospatial information capabilities change, but this is easier said than done. New ways of thinking about stakeholder alignment in light of changes in capability are presented.

Quantity estimation based on numerical cues in the mealworm beetle (Tenebrio molitor

Directory of Open Access Journals (Sweden)

Pau eCarazo

2012-11-01

Full Text Available In this study, we used a biologically relevant experimental procedure to ask whether mealworm beetles (Tenebrio molitor are spontaneously capable of assessing quantities based on numerical cues. Like other insect species, mealworm beetles adjust their reproductive behaviour (i.e. investment in mate guarding according to the perceived risk of sperm competition (i.e. probability that a female will mate with another male. To test whether males have the ability to estimate numerosity based on numerical cues, we staged matings between virgin females and virgin males in which we varied the number of rival males the experimental male had access to immediately preceding mating as a cue to sperm competition risk (from 1 to 4. Rival males were presented sequentially, and we controlled for continuous cues by ensuring that males in all treatments were exposed to the same amount of male-male contact. Males exhibited a marked increase in the time they devoted to mate guarding in response to an increase in the number of different rival males they were exposed to. Since males could not rely on continuous cues we conclude that they kept a running tally of the number of individuals they encountered serially, which meets the requirements of the basic ordinality and cardinality principles of proto-counting. Our results thus offer good evidence of ‘true’ numerosity estimation or quantity estimation and, along with recent studies in honey-bees, suggest that vertebrates and invertebrates share similar core systems of non-verbal numerical representation.

Influence of relative humidity and temperature on quantity of electric charge of static protective clothing used in petrochemical industry

Science.gov (United States)

Zhang, Yunpeng; Liu, Quanzhen; Liu, Baoquan; Li, Yipeng; Zhang, Tingting

2013-03-01

In this paper, the working principle of static protective clothing and its testing method of quantity of electric charge are introduced, and the influence of temperature and relative humidity on the quantity of electric charge (qe) of static protective clothing is studied by measuring qe of different clothing samples. The result shows that temperature and relative humidity can influence qe of static protective clothing to some extent and the influence of relative humidity is bigger than that of temperature. According to experimental results, the relationship of qe and relative humidity and temperature was analysed, and the safety boundary of quantity of electric charge is discussed. In order to reduce the occurrence of electrostatic accidents and ensure safe production and operation of petrochemical industry, some suggestions on choosing and using of static protective clothing are given for guaranteeing its static protective performance.

Photosynthesis-related quantities for education and modeling.

Science.gov (United States)

Antal, Taras K; Kovalenko, Ilya B; Rubin, Andrew B; Tyystjärvi, Esa

2013-11-01

A quantitative understanding of the photosynthetic machinery depends largely on quantities, such as concentrations, sizes, absorption wavelengths, redox potentials, and rate constants. The present contribution is a collection of numbers and quantities related mainly to photosynthesis in higher plants. All numbers are taken directly from a literature or database source and the corresponding reference is provided. The numerical values, presented in this paper, provide ranges of values, obtained in specific experiments for specific organisms. However, the presented numbers can be useful for understanding the principles of structure and function of photosynthetic machinery and for guidance of future research.

“Coupled processes” as dynamic capabilities in systems integration

Directory of Open Access Journals (Sweden)

Milton de Freitas Chagas Jr.

2017-05-01

Full Text Available The dynamics of innovation in complex systems industries is becoming an independent research stream. Apart from conventional uncertainties related to commerce and technology, complex-system industries must cope with systemic uncertainty. This paper’s objective is to analyze evolving technological paths from one product generation to the next through two case studies in the Brazilian aerospace indus­try, considering systems integration as an empirical instantiation of dynamic capabilities. A proposed “coupled processes” model intertwines two organizational processes regarded as two levels of dynamic capabilities: new product and technological developments. The model addresses the role of emergent properties in shaping a firm’s technological base. Moreover, it uses a technology readiness level to unveil systems integration business tricks and as a decision-making yardstick. The “coupled processes” model is revealed as a set of dynamic capabilities presenting ambidexterity in complex systems indus­tries, a finding that may be relevant for newly industrialized economies.

Bulky waste quantities and treatment methods in Denmark

DEFF Research Database (Denmark)

Larsen, Anna Warberg; Petersen, Claus; Christensen, Thomas Højlund

2012-01-01

were identified of which ten were recyclable and constituted 50–60% of the total quantity. The others were combustible waste for incineration (30–40%) and non-combustible waste for landfilling (10%). The largest fractions by mass were combustible waste, bricks and tile, concrete, non-combustible waste....... In addition a sorting analysis was conducted on combustible waste, which is a major fraction of bulky waste in Denmark. The generation of bulky waste was found to be 150–250 kg capita−1 year−1, and 90% of the waste was collected at recycling centres; the rest through kerbside collection. Twelve main fractions......, wood, and metal scrap, which together made up more than 90% of the total waste amounts. The amount of combustible waste could be significantly reduced through better sorting. Many of the waste fractions consisted of composite products that underwent thorough separation before being recycled...

Category 3 threshold quantities for hazard categorization of nonreactor facilities

International Nuclear Information System (INIS)

Mandigo, R.L.

1996-01-01

This document provides the information necessary to determine Hazard Category 3 threshold quantities for those isotopes of interest not listed in WHC-CM-4-46, Section 4, Table 1.''Threshold Quantities.''

Impact of Personnel Capabilities on Organizational Innovation Capability

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev; Momeni, Mostafa

2016-01-01

in this rapidly changing world. This research focuses on definition of the personnel aspect of innovation capability, and proposes a conceptual model based on the scientific articles of academic literature on organisations innovation capability. This paper includes an expert based validation in three rounds...... of the Delphi method. And for the purpose of a better appreciation of the relationship dominating the factors of the model, it has distributed the questionnaire to Iranian companies in the Food industry. This research proposed a direct relationship between Innovation Capability and the Personnel Capability...

Isolation and partial characterization of a new strain of Klebsiella pneumoniae capable of high 1,3 propanediol production from glycerol

Directory of Open Access Journals (Sweden)

B. Sen

2015-04-01

Full Text Available Glycerol is a promising feedstock for microbial cultivation and production of 1,3 propanediol (1,3 PDO. Here we report a newly isolated bacterial strain BA11 from soil, capable of fermenting glycerol to 1,3 PDO, and has been identified to be a strain of Klebsiella pneumoniae. Strain BA11 was fast growing showing peak 1,3 PDO production in 6 h of cultivation with productivity of 1.2 g/L-h without the addition of Vitamin B12. Based on the optimum glycerol utilization (75% and 1,3 PDO production (8.3 g/L and yield (0.56 mol/mol glycerol utilized, the most appropriate glycerol concentration for cultivation was 20 g/L. The strain BA11 could tolerate the pH range of 6 to 8.5 as no inhibitory effects were seen on growth as well as 1,3 PDO production. Strain BA11 was most active and could produce high 1,3 PDO in the incubation temperature range of 25 to 40 oC. The production of 1,3 PDO was maximum (9.3 g/L under aerobic condition with 95.8% glycerol utilization. Addition of glucose to the glycerol fermentation led to increased cell mass but no improvement in the 1,3 PDO production.

19 CFR 144.33 - Minimum quantities to be withdrawn.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Minimum quantities to be withdrawn. 144.33 Section 144.33 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT... Warehouse § 144.33 Minimum quantities to be withdrawn. Unless by special authority of the Commissioner of...

Quantity Estimation Of The Interactions

International Nuclear Information System (INIS)

Gorana, Agim; Malkaj, Partizan; Muda, Valbona

2007-01-01

In this paper we present some considerations about quantity estimations, regarding the range of interaction and the conservations laws in various types of interactions. Our estimations are done under classical and quantum point of view and have to do with the interaction's carriers, the radius, the influence range and the intensity of interactions

Information quantity in a pixel of digital image

OpenAIRE

Kharinov, M.

2014-01-01

The paper is devoted to the problem of integer-valued estimating of information quantity in a pixel of digital image. The definition of an integer estimation of information quantity based on constructing of the certain binary hierarchy of pixel clusters is proposed. The methods for constructing hierarchies of clusters and generating of hierarchical sequences of image approximations that minimally differ from the image by a standard deviation are developed. Experimental results on integer-valu...

Processing ordinality and quantity: the case of developmental dyscalculia.

Directory of Open Access Journals (Sweden)

Orly Rubinsten

Full Text Available In contrast to quantity processing, up to date, the nature of ordinality has received little attention from researchers despite the fact that both quantity and ordinality are embodied in numerical information. Here we ask if there are two separate core systems that lie at the foundations of numerical cognition: (1 the traditionally and well accepted numerical magnitude system but also (2 core system for representing ordinal information. We report two novel experiments of ordinal processing that explored the relation between ordinal and numerical information processing in typically developing adults and adults with developmental dyscalculia (DD. Participants made "ordered" or "non-ordered" judgments about 3 groups of dots (non-symbolic numerical stimuli; in Experiment 1 and 3 numbers (symbolic task: Experiment 2. In contrast to previous findings and arguments about quantity deficit in DD participants, when quantity and ordinality are dissociated (as in the current tasks, DD participants exhibited a normal ratio effect in the non-symbolic ordinal task. They did not show, however, the ordinality effect. Ordinality effect in DD appeared only when area and density were randomized, but only in the descending direction. In the symbolic task, the ordinality effect was modulated by ratio and direction in both groups. These findings suggest that there might be two separate cognitive representations of ordinal and quantity information and that linguistic knowledge may facilitate estimation of ordinal information.

Processing ordinality and quantity: the case of developmental dyscalculia.

Science.gov (United States)

Rubinsten, Orly; Sury, Dana

2011-01-01

In contrast to quantity processing, up to date, the nature of ordinality has received little attention from researchers despite the fact that both quantity and ordinality are embodied in numerical information. Here we ask if there are two separate core systems that lie at the foundations of numerical cognition: (1) the traditionally and well accepted numerical magnitude system but also (2) core system for representing ordinal information. We report two novel experiments of ordinal processing that explored the relation between ordinal and numerical information processing in typically developing adults and adults with developmental dyscalculia (DD). Participants made "ordered" or "non-ordered" judgments about 3 groups of dots (non-symbolic numerical stimuli; in Experiment 1) and 3 numbers (symbolic task: Experiment 2). In contrast to previous findings and arguments about quantity deficit in DD participants, when quantity and ordinality are dissociated (as in the current tasks), DD participants exhibited a normal ratio effect in the non-symbolic ordinal task. They did not show, however, the ordinality effect. Ordinality effect in DD appeared only when area and density were randomized, but only in the descending direction. In the symbolic task, the ordinality effect was modulated by ratio and direction in both groups. These findings suggest that there might be two separate cognitive representations of ordinal and quantity information and that linguistic knowledge may facilitate estimation of ordinal information.

the practical ed for evaluatio of capability

African Journals Online (AJOL)

security of x dollars for y number of weeks will not protect him. The greatest .... capable of performing a full day' work. 3. ometimes there i an inadequate redu tion of disability. 4. ... work, but not of 8 hour continuou work at productive labour.

Capability Paternalism

NARCIS (Netherlands)

Claassen, R.J.G.|info:eu-repo/dai/nl/269266224

A capability approach prescribes paternalist government actions to the extent that it requires the promotion of specific functionings, instead of the corresponding capabilities. Capability theorists have argued that their theories do not have much of these paternalist implications, since promoting

Foreign materials in the repository. Update of estimated quantities

International Nuclear Information System (INIS)

Karvonen, T.

2011-06-01

A variety of materials are used during the construction process and the operation of the repository for spent nuclear fuel at Olkiluoto in Eurajoki, Finland. In addition to materials necessary for the construction and operation, some materials may be transported into the repository with the ventilation air, as emissions from vehicles etc. Both of these two types of materials are considered here and both introduced quantities and the quantities that remain after the closure in the repository are estimated here based on the most recent information. This work is intended to update the previous estimations, and it takes advantage of the experience collected during the construction of the underground rock characterisation facility called ONKALO at Olkiluoto. The implemented quantities as well as designs and preliminary designs have been used in calculating the quantities of the foreign materials. The estimations made in this report are specific to a KBS-3V type repository. In some cases more generic information has been used, particularly when the relevant quantities have not been monitored in ONKALO. The estimations are based on the new repository layout produced in 2010 and consider the latest plans for grouting and rock support. As all of these plans are not final some quantities may change in the future. As the repository layout may still go through some changes this report also provides the foreign materials for a hundred meters of different deposition tunnels designed for the OL and LO type canisters1. The results have also been calculated for a space demanded by a deposition tunnel end plug and the tunnel lengths before and after one. The most significant foreign materials are certain accessory minerals of the clay materials followed by organic materials (including the organic carbon from the clay materials), cement, steel and silica. (orig.)

Calibration of personal dosemeters in terms of the ICRU operational quantities

International Nuclear Information System (INIS)

McDonald, J.C.; Hertel, N.E.

1992-01-01

The International Commission on Radiological Units and Measurements (ICRU) has defined several new operational quantities for radiation protection purposes. The quantities to be used for personal monitoring are defined at depths in the human body. Because these quantities are impossible to measure directly, the ICRU has recommended that personal dosimeters should be calibrated under simplified conditions on an appropriate phantom, such as the ICRU sphere. The U.S. personal dosimetry accreditation programs make use of a 30 x 30 x 15 cm polymethylmethacrylate (PMMA) phantom; therefore it is necessary to relate the response of dosimeters calibrated on this phantom to the ICRU operational quantities. Calculations of the conversion factors to compute dosimeter response in terms of the operational quantities have been performed using the code MCNP. These calculations have also been compared to experimental measurements using thermoluminescent (TLD) detectors. (author)

Calibration of personal dosemeters in terms of the ICRU operational quantities

International Nuclear Information System (INIS)

McDonald, J.C.; Hertel, N.E.

1992-05-01

The International Commission on Radiological Units and Measurements (ICRU) has defined several new operational quantities for radiation protection purposes. The quantities to be used for personal monitoring are defined at depths in the human body. Because these quantities are impossible to measure directly, the ICRU has recommended that personal dosemeters should be calibrated under simplified conditions on an appropriate phantom, such as the ICRU sphere. The US personal dosimetry accreditation programs make use of a 30 x 30 x 15 cm polymethymethacrylate (PMMA) phantom, therefore it is necessary to relate the response of dosemeters calibrated on this phantom to the ICRU operational quantities. Calculations of the conversion factors to compute dosemeter response in terms of the operational quantities have been performed using the code MCNP. These calculations have also been compared to experimental measurements using thermoluminescent (TLD) detectors

Manufacturing capability as a technological development indicator in the pharmaceutical industry

Directory of Open Access Journals (Sweden)

John Jairo Gallo Castro

2010-01-01

Full Text Available The pharmaceutical industrial has five subsectors: medicines, cosmetics, phytotherapeutics, cleaning products and medical devices. The medicine subsector consists of organisations producing, importing and selling these products. Most studies about this industry have been guided by economic interests without assessing technological aspects of production. This article was aimed at proposing a methodology for assessing and describing the medicine sector according to its technological development by using the manufacturing capability concept. The main information was taken from the Colombian Medicaments and Food Surveillance Institute’s (Instituto Nacional de Vigilancia de Medicamentos y Alimentos - INVIMA databases related to pharmaceutical plant production in Bogotá, including material transformation facilities. This study led to three characteristics being identified for defining the pharmaceutical industry’s manufacturing capability: that related to the pharmacological group to which active pharmaceutical ingredients belong, that linked to specifications regarding medicines’ sterility and that related to the technology required for manufacturing each pharmaceutical product. An analysis of these features has thus been presented and some technologies have been identified which have not been transferred or assimilated by the organisations being studied. It was found that manufacturing capability should be considered as being an indicator of the degree of technological development in these subsectors in Colombia.

Increasing innovation capability:of product-service systems through collaborative networks

OpenAIRE

Wallin, Johanna

2011-01-01

Many manufacturing industries are undergoing a transition from manufacturing of products towards integrating more services into the traditional product concepts and provide product-service systems (PSS). Development of PSS changes the focus from the product to the functionality of the product; hence it can be referred to as functional product development. PSS also puts focus on the value of the knowledge-intensive solution. This change in focus challenges the way companies innovate. When deve...

Defense Industrial Base Capabilities Study: Battlespace Awareness

Science.gov (United States)

2004-01-01

not production capacity or workforce issues. It considers the best capabilities in both the domestic and foreign components of the industrial base...www.maliburesearch.com Ground Penetrating Radar MARIMATECH 1989 Aarhus, Denmark n.a. n.a. www.marimatech.com Sonar Maser Technology (NZ) Ltd. 1983 Auckland , New

Conserved quantities for generalized KdV equations

International Nuclear Information System (INIS)

Calogero, F.; Rome Univ.; Degasperis, A.; Rome Univ.

1980-01-01

It is noted that the nonlinear evolution equation usub(t) = α(t)usub(xxx) - 6ν(t) usub(x)u, u is identical to u(x,t), possesses three (and, in some cases, four) conserved quantities, that are explicitly displayed. These results are of course relevant only to the cases in which this evolution equation is not known to possess an infinite number of conserved quantities. Purpose and scope of this paper is to report three or four simple conservation laws possessed by the evolution equation usub(t) = α(t)usub(xxx) - 6ν(t)usub(x)u, u is identical to u(x,t). (author)

Optimisation of Economic Order Quantity Using Neural Networks Approach = Yapay Sinir Ağları Yaklaşımı ile Ekonomik Düzenin Optimizasyonu

Directory of Open Access Journals (Sweden)

Osman Nuri UÇAN

2001-01-01

Full Text Available In this paper, a Back Propagation-Artificial Neural Network (BP-ANN has been adapted for predicting the required car parts quantities in a real and major auto parts supplier chain. The conventional approach to determine the parts requirements is the Economic Order Quantity (EOQ method. The ability of neural models to learn, particularly their capability of handling large amounts of data simultaneously as well as their fast response time, are the characteristics desired for predictive and forecasting purposes. Here, the actual data obtained from a major auto parts supplier chain, involving a multi-layer system of supplying auto parts to car dealers, have been used to optimise and develop a BP-ANN model. The model has shown promising results in predicting parts orders with high degree of accuracy.

PENGELOLAAN KNOWLEDGE MANAGEMENT CAPABILITY DALAM MEMEDIASI DUKUNGAN INFORMATION TECHNOLOGY RELATEDNESS TERHADAP KINERJA PERUSAHAAN

Directory of Open Access Journals (Sweden)

Luluk Muhimatul Ifada

2011-06-01

Full Text Available The study examines whether or not and how information technology (IT relatedness influences corporate performance. This study proposes that knowledge management (KM is a critical organizational capability through which IT influences firm performance. Measurement of IT relatedness and KM capability uses a reflective second-order factor modeling approach for capturing complementarities among the four dimensions of IT relatedness (IT strategy making processes, IT vendor management processes, IT human resource management processes and IT infrastructure and for capturing complementarities among the three dimensions of KM capability (product KM capability, customer KM capability, and managerial KM capability. A survey was conducted among 93 branch managers of banking in Central Java. Structural Equation Model (SEM was used to analyze the data using the software program of SmartPLS (Partial Least Square. The findings support for the hypotheses of the study. IT relatedness of business units enhances the cross unit KM capability of the corporate. The KM capability creates and exploits cross-unit synergies from the product, customer, and managerial knowledge resources of the corporate. These synergies increase the corporate performance. IT relatedness of business units positively influences corporate performance. IT relatedness also has significant indirect effects on corporate performance through the mediation of KM capability.

Influence of relative humidity and temperature on quantity of electric charge of static protective clothing used in petrochemical industry

International Nuclear Information System (INIS)

Zhang, Yunpeng; Liu, Quanzhen; Liu, Baoquan; Li, Yipeng; Zhang, Tingting

2013-01-01

In this paper, the working principle of static protective clothing and its testing method of quantity of electric charge are introduced, and the influence of temperature and relative humidity on the quantity of electric charge (q e ) of static protective clothing is studied by measuring q e of different clothing samples. The result shows that temperature and relative humidity can influence q e of static protective clothing to some extent and the influence of relative humidity is bigger than that of temperature. According to experimental results, the relationship of q e and relative humidity and temperature was analysed, and the safety boundary of quantity of electric charge is discussed. In order to reduce the occurrence of electrostatic accidents and ensure safe production and operation of petrochemical industry, some suggestions on choosing and using of static protective clothing are given for guaranteeing its static protective performance.

Establishment and Evaluation of Decommissioning Plant Inventory DB and Waste Quantity

International Nuclear Information System (INIS)

Oh, Jae Yong; Moon, Sang-Rae; Yun, Taesik; Kim, Hee-Geun; Sung, Nak-Hoon; Jung, Seung Hyuk

2016-01-01

Korea Hydro and Nuclear Power (KHNP) made a decision for permanent shutdown of Kori-1 and has progressed the strategy determination and R and D for the decommissioning of Kori-1. Decommissioning waste, Structure, System and Components (SSCs) is one of the most important elements. Decommissioning waste quantity is calculated based on Plant Inventory Database (PI DB) with activation and contamination data. Due to the largest portion of waste management and disposal in decommissioning, it is necessary to exactly evaluate waste quantity (applying the regulation, guideline and site-specific characterization) for economic feasibility. In this paper, construction of PI DB and evaluation of waste quantity for Optimized Pressurized Reactor (OPR-1000) are mainly described. Decommissioning waste quantities evaluated are going to be applied to calculation of the project cost. In fact, Ministry of Trade, Industry and Energy (MOTIE) in Korea expected the decommissioning waste quantity in a range of 14,500-18,850 drums, and predicted appropriate liability for decommissioning fund by using waste quantity. The result of this study is also computed by the range of 14,500-18,850 drums. Since there is no site-specific data for the NPP site, this evaluation is the preliminary analysis

Establishment and Evaluation of Decommissioning Plant Inventory DB and Waste Quantity

Energy Technology Data Exchange (ETDEWEB)

Oh, Jae Yong; Moon, Sang-Rae; Yun, Taesik; Kim, Hee-Geun [KHNP CRI, Daejeon (Korea, Republic of); Sung, Nak-Hoon; Jung, Seung Hyuk [KONES Corp., Seoul (Korea, Republic of)

2016-10-15

Korea Hydro and Nuclear Power (KHNP) made a decision for permanent shutdown of Kori-1 and has progressed the strategy determination and R and D for the decommissioning of Kori-1. Decommissioning waste, Structure, System and Components (SSCs) is one of the most important elements. Decommissioning waste quantity is calculated based on Plant Inventory Database (PI DB) with activation and contamination data. Due to the largest portion of waste management and disposal in decommissioning, it is necessary to exactly evaluate waste quantity (applying the regulation, guideline and site-specific characterization) for economic feasibility. In this paper, construction of PI DB and evaluation of waste quantity for Optimized Pressurized Reactor (OPR-1000) are mainly described. Decommissioning waste quantities evaluated are going to be applied to calculation of the project cost. In fact, Ministry of Trade, Industry and Energy (MOTIE) in Korea expected the decommissioning waste quantity in a range of 14,500-18,850 drums, and predicted appropriate liability for decommissioning fund by using waste quantity. The result of this study is also computed by the range of 14,500-18,850 drums. Since there is no site-specific data for the NPP site, this evaluation is the preliminary analysis.

AMDTreat 5.0+ with PHREEQC titration module to compute caustic chemical quantity, effluent quality, and sludge volume

Science.gov (United States)

Cravotta, Charles A.; Means, Brent P; Arthur, Willam; McKenzie, Robert M; Parkhurst, David L.

2015-01-01

Alkaline chemicals are commonly added to discharges from coal mines to increase pH and decrease concentrations of acidity and dissolved aluminum, iron, manganese, and associated metals. The annual cost of chemical treatment depends on the type and quantities of chemicals added and sludge produced. The AMDTreat computer program, initially developed in 2003, is widely used to compute such costs on the basis of the user-specified flow rate and water quality data for the untreated AMD. Although AMDTreat can use results of empirical titration of net-acidic or net-alkaline effluent with caustic chemicals to accurately estimate costs for treatment, such empirical data are rarely available. A titration simulation module using the geochemical program PHREEQC has been incorporated with AMDTreat 5.0+ to improve the capability of AMDTreat to estimate: (1) the quantity and cost of caustic chemicals to attain a target pH, (2) the chemical composition of the treated effluent, and (3) the volume of sludge produced by the treatment. The simulated titration results for selected caustic chemicals (NaOH, CaO, Ca(OH)2, Na2CO3, or NH3) without aeration or with pre-aeration can be compared with or used in place of empirical titration data to estimate chemical quantities, treated effluent composition, sludge volume (precipitated metals plus unreacted chemical), and associated treatment costs. This paper describes the development, evaluation, and potential utilization of the PHREEQC titration module with the new AMDTreat 5.0+ computer program available at http://www.amd.osmre.gov/.

Plutonium Oxide Process Capability Work Plan

Energy Technology Data Exchange (ETDEWEB)

Meier, David E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tingey, Joel M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2014-02-28

Pacific Northwest National Laboratory (PNNL) has been tasked to develop a Pilot-scale Plutonium-oxide Processing Unit (P3U) providing a flexible capability to produce 200g (Pu basis) samples of plutonium oxide using different chemical processes for use in identifying and validating nuclear forensics signatures associated with plutonium production. Materials produced can also be used as exercise and reference materials.

The Organizational Approach of Capability Theory: A Review Essay

OpenAIRE

Garzarelli, Giampaolo

2006-01-01

Richard Langlois, Tony Yu & Paul Robertson have assembled a collection of previously published papers that move beyond textbook production theory. This essay discusses work by Frank Knight and Hendrik Houthakker not reproduced in LYR in relation to the capability theory of economic organization. Knight identified the problem of organization as the search for and the coordination of different dispersed capabilities. Houthakker helps us to see more clearly that the benefits of specialization ar...

Mobile systems capability plan

International Nuclear Information System (INIS)

1996-09-01

This plan was prepared to initiate contracting for and deployment of these mobile system services. 102,000 cubic meters of retrievable, contact-handled TRU waste are stored at many sites around the country. Also, an estimated 38,000 cubic meters of TRU waste will be generated in the course of waste inventory workoff and continuing DOE operations. All the defense TRU waste is destined for disposal in WIPP near Carlsbad NM. To ship TRU waste there, sites must first certify that the waste meets WIPP waste acceptance criteria. The waste must be characterized, and if not acceptable, subjected to additional processing, including repackaging. Most sites plan to use existing fixed facilities or open new ones between FY1997-2006 to perform these functions; small-quantity sites lack this capability. An alternative to fixed facilities is the use of mobile systems mounted in trailers or skids, and transported to sites. Mobile systems will be used for all characterization and certification at small sites; large sites can also use them. The Carlsbad Area Office plans to pursue a strategy of privatization of mobile system services, since this offers a number of advantages. To indicate the possible magnitude of the costs of deploying mobile systems, preliminary estimates of equipment, maintenance, and operating costs over a 10-year period were prepared and options for purchase, lease, and privatization through fixed-price contracts considered

Productivity, Efficiency, and Competitiveness of Small-Scale Organic Cotton Production in Tanzania

DEFF Research Database (Denmark)

Mgeni, Dotto; Henningsen, Arne

cannot be adjusted in the short run. However, land, labor, and organic fertilizer can neither be traded on a perfect market nor are their quantities completely fixed for cotton production, but these input quantities can be adjusted by adjusting their use for other activities of the household. Hence......Cotton is known as the “white gold” of Africa since it is the only export crop in which the continent’s share in the world market has increased over the past decades. Total cotton production as well as productivity grew particularly in Western and Central Africa. In contrast, cotton production grew...... and output, as well as socio-economic and agronomic factors, but also on the shadow prices of all sparsely traded inputs, i.e. land, labor, and organic fertilizer. Hence, we can not only analyze productivity, technical efficiency, and scale efficiency, but also allocative efficiency, profitability...

29 CFR 780.814 - “Grown in commercial quantities.”

Science.gov (United States)

2010-07-01

... OF GENERAL POLICY OR INTERPRETATION NOT DIRECTLY RELATED TO REGULATIONS EXEMPTIONS APPLICABLE TO AGRICULTURE, PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT... “commercial” quantities, the trade understanding of what are “commercial” quantities of cotton would be...

Dynamic capabilities, Marketing Capability and Organizational Performance

Directory of Open Access Journals (Sweden)

Adriana Roseli Wünsch Takahashi

2017-01-01

Full Text Available The goal of the study is to investigate the influence of dynamic capabilities on organizational performance and the role of marketing capabilities as a mediator in this relationship in the context of private HEIs in Brazil. As a research method we carried out a survey with 316 IES and data analysis was operationalized with the technique of structural equation modeling. The results indicate that the dynamic capabilities have influence on organizational performance only when mediated by marketing ability. The marketing capability has an important role in the survival, growth and renewal on educational services offerings for HEIs in private sector, and consequently in organizational performance. It is also demonstrated that mediated relationship is more intense for HEI with up to 3,000 students and other organizational profile variables such as amount of courses, the constitution, the type of institution and type of education do not significantly alter the results.

A case study: application of statistical process control tool for determining process capability and sigma level.

Science.gov (United States)

Chopra, Vikram; Bairagi, Mukesh; Trivedi, P; Nagar, Mona

2012-01-01

Statistical process control is the application of statistical methods to the measurement and analysis of variation process. Various regulatory authorities such as Validation Guidance for Industry (2011), International Conference on Harmonisation ICH Q10 (2009), the Health Canada guidelines (2009), Health Science Authority, Singapore: Guidance for Product Quality Review (2008), and International Organization for Standardization ISO-9000:2005 provide regulatory support for the application of statistical process control for better process control and understanding. In this study risk assessments, normal probability distributions, control charts, and capability charts are employed for selection of critical quality attributes, determination of normal probability distribution, statistical stability, and capability of production processes, respectively. The objective of this study is to determine tablet production process quality in the form of sigma process capability. By interpreting data and graph trends, forecasting of critical quality attributes, sigma process capability, and stability of process were studied. The overall study contributes to an assessment of process at the sigma level with respect to out-of-specification attributes produced. Finally, the study will point to an area where the application of quality improvement and quality risk assessment principles for achievement of six sigma-capable processes is possible. Statistical process control is the most advantageous tool for determination of the quality of any production process. This tool is new for the pharmaceutical tablet production process. In the case of pharmaceutical tablet production processes, the quality control parameters act as quality assessment parameters. Application of risk assessment provides selection of critical quality attributes among quality control parameters. Sequential application of normality distributions, control charts, and capability analyses provides a valid statistical

MINAC, A new radiographic inspection capability

International Nuclear Information System (INIS)

Lapides, M.E.; Schonberg, R.

1983-01-01

In service, radiographic inspection of thick section, metallic components has historically been limited to the capabilities of radioisotopic sources such as cobalt and iridium. Although practical in many applications, these sources tend to be restricted by output intensity, by resolution obtainable, and by the physical size and weight of necessary transport shielding. In nuclear plant applications, any radiography is also frequently inhibited by the presence of a radiation background from activated corrosion products on the inspection object which may fog the film before the desired exposure is achieved. In recognition of these limitations and the need for improved capability in the conduct of mandated ten-year inspection of U.S. nuclear plant components such as reactor coolant pumps, pressure vessel nozzles and valve bodies, the Electric Power Research Institute (EPRI) undertook the development of a high energy, X-ray device appropriate for in service inspection of thick section (up to approximately 30 cm of steel) components. The development was conducted by Schonberg Radiation (U.S.A). The product, MINAC, a miniaturized linear accelerator system, has been in use in many plant inspections since April 1981. This paper describes the development and typical applications of MINAC

Radiation quantities and units. ICRU report 33

International Nuclear Information System (INIS)

Anon.

1987-01-01

This report supersedes ICRU Report 19. Since ICRU Report 19 was published, a number of discussions have taken place between members of the Report Committee on Fundamental Quantities and Units and other workers in the field. Some of these discussions have resulted in the acceptance of certain modifications in the material set out in Report 19 and these modifications are incorporated in the current report. In addition, there has been some expansion and rearrangement of the material in the earlier report. It is recommended that energy state be inserted into the definition of activity and that the word transformation be replaced by transition. These modifications have now been incorporated into the current definition. Helpful comments on the previous quantities and units report have resulted in clarification of several points in the present Report. In line with providing more didactic material and useful source material for other ICRU reports, the general considerations in subsection I.A of Report 19 have been expanded and placed in a separate subsection. The additional material includes discussions of four terms that are used in this document - quantity, unit, stochastic, and non-stochastic - along with a brief discussion of the mathematical formalism used in ICRU reports. 11 refs., 4 tabs

Trained Quantity Abilities in Horses (Equus caballus: A Preliminary Investigation

Directory of Open Access Journals (Sweden)

Maria Elena Miletto Petrazzini

2014-07-01

Full Text Available Once believed to be a human prerogative, the capacity to discriminate between quantities now has also been reported in several vertebrates. To date, only two studies investigated numerical abilities in horses (Equus caballus but reported contrasting data. To assess whether horses can be trained to discriminate between quantities, I have set up a new experimental protocol using operant conditioning. One adult female was trained to discriminate between 1 and 4 (Test 1 in three different conditions: non-controlled continuous variables (numerical and continuous quantities that co-vary with number are simultaneously available, 50% controlled continuous variables (intermediate condition, and 100% controlled continuous variables (only numerical information available. The subject learned the discrimination in all conditions, showing the capacity to process numerical information. When presented with a higher numerical ratio (2 vs. 4, Test 2, the subject still discriminated between the quantities but its performance was statistically significant only in the non-controlled condition, suggesting that the subject used multiple cues in presence of a more difficult discrimination. On the whole, the results here reported encourage the use of this experimental protocol as a valid tool to investigate the capacity to process numerical and continuous quantities in horses in future research.

On the Output-Inflation Relationship When Price and Quantity Adjustments are Costly

DEFF Research Database (Denmark)

Danziger, Leif; Kreiner, Claus Thustrup

A vast literature analyzes the real effects of price-adjustment costs assuming that quantity adjustments are costless. In this paper, we analyze whether the presence of quantity-adjustments costs, which presumably are significant, change the traditional results on the impact of inflation....... In particular, recent findings suggest that quantity-adjustment costs may remove the linkage between output and inflation. We show that this is not the case when inflation is anticipated. On the contrary, quantity-adjustment costs may significantly amplify the consequences of price-adjustment costs...

Screening of bacterial strains capable of converting biodiesel-derived raw glycerol into 1,3-propanediol, 2,3-butanediol and ethanol

Energy Technology Data Exchange (ETDEWEB)

Metsoviti, Maria; Paramithiotis, Spiros; Drosinos, Eleftherios H.; Galiotou-Panayotou, Maria; Nychas, George-John E.; Papanikolaou, Seraphim [Department of Food Science and Technology, Agricultural University of Athens, Athens (Greece); Zeng, An-Ping [Institute of Bioprocess and Biosystems Engineering, Hamburg University of Technology (TUHH), Hamburg (Germany)

2012-02-15

The ability of bacterial strains to assimilate glycerol derived from biodiesel facilities to produce metabolic compounds of importance for the food, textile and chemical industry, such as 1,3-propanediol (PD), 2,3-butanediol (BD) and ethanol (EtOH), was assessed. The screening of 84 bacterial strains was performed using glycerol as carbon source. After initial trials, 12 strains were identified capable of consuming raw glycerol under anaerobic conditions, whereas 5 strains consumed glycerol under aerobiosis. A plethora of metabolic compounds was synthesized; in anaerobic batch-bioreactor cultures PD in quantities up to 11.3 g/L was produced by Clostridium butyricum NRRL B-23495, while the respective value was 10.1 g/L for a newly isolated Citrobacter freundii. Adaptation of Cl. butyricum at higher initial glycerol concentration resulted in a PD{sub max} concentration of {proportional_to}32 g/L. BD was produced by a new Enterobacter aerogenes isolate in shake-flask experiments, under fully aerobic conditions, with a maximum concentration of {proportional_to}22 g/L which was achieved at an initial glycerol quantity of 55 g/L. A new Klebsiella oxytoca isolate converted waste glycerol into mixtures of PD, BD and EtOH at various ratios. Finally, another new C. freundii isolate converted waste glycerol into EtOH in anaerobic batch-bioreactor cultures with constant pH, achieving a final EtOH concentration of 14.5 g/L, a conversion yield of 0.45 g/g and a volumetric productivity of {proportional_to}0.7 g/L/h. As a conclusion, the current study confirmed the utilization of biodiesel-derived raw glycerol as an appropriate substrate for the production of PD, BD and EtOH by several newly isolated bacterial strains under different experimental conditions. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Estimated quantities of residual materials in a KBS-3H repository at Olkiluoto

Energy Technology Data Exchange (ETDEWEB)

Hagros, Annika (Sannio and Riekkola OY (Finland))

2008-12-15

The quantities of residual materials in a KBS-3H type repository have been estimated in this report. The repository is assumed to be constructed at Olkiluoto in Eurajoki, Western Finland. Both the total quantities of the materials introduced into the repository and the quantities of materials that remain in the repository after closure have been calculated. The calculations are largely based on a similar work regarding the material quantities in the Finnish KBS-3V repository and the main goal has been to identify the differences between the KBS-3H and KBS-3V repositories with respect to the type and quantities of residual materials. As the design of the KBS-3H repository is not final yet, the results are only preliminary. Several alternative designs were assumed in the calculations, resulting in different total quantities of materials. The design alternatives that had the greatest effect on the total material quantities were the two different tunnel backfill options, bentonite-crushed rock and Friedland clay. If Friedland clay is used instead of a bentonite-crushed rock mixture, the total quantity of pyrite remaining in the repository is 20 times larger and the quantities of organic materials and gypsum are also increased significantly. The other design alternatives did not have a substantial effect on the total material quantities. The remaining quantity of cement can be reduced by some 20% by selecting the silica grouting alternative in the sealing of the rock mass and low-pH cement in the shotcreting of the repository, instead of using the ordinary cement alternatives. If the total quantity of steel should be minimised, the use of the DAWE design alternative would be better than the Basic Design, although the total reduction would be less than 10%. The main difference between the different drift end plug alternatives is related to the total remaining quantity of silica, which is some 80% smaller if the rock plug is used instead of the LHHP (Low Heat High

Estimated quantities of residual materials in a KBS-3H repository at Olkiluoto

International Nuclear Information System (INIS)

Hagros, Annika

2008-12-01

The quantities of residual materials in a KBS-3H type repository have been estimated in this report. The repository is assumed to be constructed at Olkiluoto in Eurajoki, Western Finland. Both the total quantities of the materials introduced into the repository and the quantities of materials that remain in the repository after closure have been calculated. The calculations are largely based on a similar work regarding the material quantities in the Finnish KBS-3V repository and the main goal has been to identify the differences between the KBS-3H and KBS-3V repositories with respect to the type and quantities of residual materials. As the design of the KBS-3H repository is not final yet, the results are only preliminary. Several alternative designs were assumed in the calculations, resulting in different total quantities of materials. The design alternatives that had the greatest effect on the total material quantities were the two different tunnel backfill options, bentonite-crushed rock and Friedland clay. If Friedland clay is used instead of a bentonite-crushed rock mixture, the total quantity of pyrite remaining in the repository is 20 times larger and the quantities of organic materials and gypsum are also increased significantly. The other design alternatives did not have a substantial effect on the total material quantities. The remaining quantity of cement can be reduced by some 20% by selecting the silica grouting alternative in the sealing of the rock mass and low-pH cement in the shotcreting of the repository, instead of using the ordinary cement alternatives. If the total quantity of steel should be minimised, the use of the DAWE design alternative would be better than the Basic Design, although the total reduction would be less than 10%. The main difference between the different drift end plug alternatives is related to the total remaining quantity of silica, which is some 80% smaller if the rock plug is used instead of the LHHP (Low Heat High

Sandia Laboratories technical capabilities. Auxiliary capabilities: environmental health information science

International Nuclear Information System (INIS)

1975-09-01

Sandia Laboratories is an engineering laboratory in which research, development, testing, and evaluation capabilities are integrated by program management for the generation of advanced designs. In fulfilling its primary responsibility to ERDA, Sandia Laboratories has acquired extensive research and development capabilities. The purpose of this series of documents is to catalog the many technical capabilities of the Laboratories. After the listing of capabilities, supporting information is provided in the form of highlights, which show applications. This document deals with auxiliary capabilities, in particular, environmental health and information science. (11 figures, 1 table) (RWR)

Water quality and quantity in the context of large-scale cellulosic biofuel production in the Mississippi-Atchafalaya River Basin

Science.gov (United States)

VanLoocke, A.; Bernacchi, C. J.; Twine, T. E.; Kucharik, C. J.

2012-12-01

Numerous socio-economic and environmental pressures have driven the need to increase domestic renewable energy production in the Midwest. The primary attempt at addressing this need has been to use maize; however, the leaching of residual nitrate from maize fertilizer into runoff drives the formation of the Gulf of Mexico hypoxic or "Dead" zone which can have significant environmental impacts on the marine ecosystems. As a result of the threat to benthic organisms and fisheries in this region, The Mississippi Basin/Gulf of Mexico Task Force has set in place goals to reduce the size of the hypoxic zone from the current size of ~ 20,000 km2 to nitrate (DIN) export would have to decrease by 30 to 55% to meet this goal. An alternative option to meet the renewable energy needs while reducing the environmental impacts associated with DIN export is to produce high-yielding, low fertilizer input perennial grasses such as switchgrass and miscanthus. Miscanthus and switchgrass have been shown to greatly reduce nitrate leaching at the plot scale, even during the establishment phase. This reduction in leaching is attributed to the perennial nature and the efficient recycling of nutrients via nutrient translocation. While these feedstocks are able to achieve higher productivity than maize grain with fewer inputs, they require more water, presenting the potential for environmental impacts on regional hydrologic cycle, including reductions in streamflow. The goal of this research is to determine the change in streamflow in the Mississippi-Atchafalaya River Basin (MARB) and the export of nitrogen from fertilizer to the Gulf of Mexico. To address this goal, we adapted a vegetation model capable of simulating the biogeochemistry of current crops as well as miscanthus and switchgrass, the Integrated Biosphere Simulator - agricultural version (Agro-IBIS) and coupled it with a hydrology model capable of simulating streamflow and nitrogen export, the Terrestrial Hydrology Model with

A statistical law in the perception of risks and physical quantities in traffic

DEFF Research Database (Denmark)

Elvik, Rune

2015-01-01

This paper suggests that a universal psychophysical law influences the perception of risks and physical quantities in traffic. This law states that there will be a tendency to overestimate low probabilities or small quantities, while high probabilities or large quantities may be underestimated....... Studies of the perception of risk and physical quantities in traffic have found a highly consistent pattern....

Municipal water quantities and health in Nunavut households: an exploratory case study in Coral Harbour, Nunavut, Canada

Directory of Open Access Journals (Sweden)

Kiley Daley

2014-03-01

Full Text Available Background: Access to adequate quantities of water has a protective effect on human health and well-being. Despite this, public health research and interventions are frequently focused solely on water quality, and international standards for domestic water supply minimums are often overlooked or unspecified. This trend is evident in Inuit and other Arctic communities even though numerous transmissible diseases and bacterium infections associated with inadequate domestic water quantities are prevalent. Objectives: Our objective was to explore the pathways by which the trucked water distribution systems being used in remote northern communities are impacting health at the household level, with consideration given to the underlying social and environmental determinants shaping health in the region. Methods: Using a qualitative case study design, we conducted 37 interviews (28 residents, 9 key informants and a review of government water documents to investigate water usage practices and perspectives. These data were thematically analysed to understand potential health risks in Arctic communities and households. Results: Each resident receives an average of 110 litres of municipal water per day. Fifteen of 28 households reported experiencing water shortages at least once per month. Of those 15, most were larger households (5 people or more with standard sized water storage tanks. Water shortages and service interruptions limit the ability of some households to adhere to public health advice. The households most resilient, or able to cope with domestic water supply shortages, were those capable of retrieving their own drinking water directly from lake and river sources. Residents with extended family and neighbours, whom they can rely on during shortages, were also less vulnerable to municipal water delays. Conclusions: The relatively low in-home water quantities observed in Coral Harbour, Nunavut, appear adequate for some families. Those living in

Study on heat removal capability concrete cask system with horizontal orientation

International Nuclear Information System (INIS)

Nabemoto, Toyonobu; Sakai, Mikio; Fujiwara, Hiroaki; Sakaya, Tadatsugu

2002-01-01

In Japan, nuclear fuel cycle, has been promoted, so the recycle fuels formed at nuclear power stations are planned to be processed at reprocessing facilities in future. However, as forming quantities of the recycle fuels are more than reprocessing quantities of the facilities, it is needed to practice a facility (interim storage facility (ISF)) to temporarily store them among the recycle fuels will be reprocessed. The Ishikawajima-Harima Heavy Industries, Co., Ltd. has investigated on vault system and concrete cask system for dry storage system with excellent economical efficiency among various systems on ISFs. As the latter method has a number of actual results in U.S.A., its practice is progressed after some improvements suitable for Japan. When progressing this practice on the latter method on fiscal year 1999, at first, a concrete cask with actual size was experimentally produced, to confirm its productivity. On fiscal year 2000, aiming to establish heat removal evaluation at storage, a thermal load test simulated at the storage was carried out by using this trial product. Here was reported results obtained at a test simulated at repacking carried out on fiscal year 2001. (G.K.)

Import and export of small quantities of nuclear materials

International Nuclear Information System (INIS)

Grenier, M.

1986-06-01

Administrative procedures for import export of nuclear materials are specific for each country. In France regulations are reviewed for small quantities, lower threshold, in some cases, allows a simplified procedure, however thresholds are not the same in the different texts (and for one of them, concerning proliferation, is zero). It is obvious that regulations are necessary even for small quantities but national and international threshold should be harmonized [fr

7 CFR 35.13 - Minimum quantity.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Minimum quantity. 35.13 Section 35.13 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... part, transport or receive for transportation to any foreign destination, a shipment of 25 packages or...

Process of quantity determination of uranium by chromatography in liquid zone

International Nuclear Information System (INIS)

Muller, J.P.; Cojean, J.; Daubizit, M.

1993-01-01

The invention concerns a process of quantity determination of uranium by chromatography in liquid zone, usable to determine the quantity of uranium traces. Solutions to be treated can be aqueous or organic

Impact of the Velo 2 half misalignment on physical quantities

CERN Document Server

Roguljic, Matej; Borghi, Silvia; Grillo, Lucia; CERN. Geneva. EP Department

2016-01-01

The impact of the misalignment of the Vertex Locator of the LHCb experiment on the physical quantities of the decay "$D^{*+} \\rightarrow (D^{0}\\rightarrow K^{-}\\pi^{+}) \\pi^{+} $" is studied in this note. Different misalignments of the 2 halves are applied to Monte Carlo data and the variations of the physical quantities with respect to the case without misalignment are evaluated. The results show the importance of the VELO 2 half alignment which can significantly affect the physics performance in the large misalignment case. A misalignment equal to the precision of the real-time alignment of the Vertex Locator is found to have a negligible effect on the studied physical quantities.

Westinghouse Hanford Company package testing capabilities

International Nuclear Information System (INIS)

Hummer, J.H.; Mercado, M.S.

1993-07-01

The Department of Energy's Hanford Site is a 1,450-km 2 (560-mi 2 ) installation located in southeastern Washington State. Established in 1943 as a plutonium production facility, Hanford's role has evolved into one of environmental restoration and remediation. Many of these environmental restoration and remediation activities involve transportation of radioactive/hazardous materials. Packagings used for the transportation of radioactive/hazardous materials must be capable of meeting certain normal transport and hypothetical accident performance criteria. Evaluations of performance to these criteria typically involve a combination of analysis and testing. Required tests may include the free drop, puncture, penetration, compression, thermal, heat, cold, vibration, water spray, water immersion, reduced pressure, and increased pressure tests. The purpose of this paper is to outline the Hanford capabilities for performing each of these tests

Decision - making of Direct Customers Based on Available Transfer Capability

Science.gov (United States)

Quan, Tang; Zhaohang, Lin; Huaqiang, Li

2017-05-01

Large customer direct-power-purchasing is a hot spot in the electricity market reform. In this paper, the author established an Available Transfer Capability (ATC) model which takes uncertain factors into account, applied the model into large customer direct-power-purchasing transactions and improved the reliability of power supply during direct-power-purchasing by introducing insurance theory. The author also considered the customers loss suffered from power interruption when building ATC model, established large customer decision model, took purchasing quantity of power from different power plants and reserved capacity insurance as variables, targeted minimum power interruption loss as optimization goal and best solution by means of particle swarm algorithm to produce optimal power purchasing decision of large consumers. Simulation was made through IEEE57 system finally and proved that such method is effective.

Nuclear data for the production of radioisotopes in fusion materials irradiation facility

International Nuclear Information System (INIS)

Cheng, E.T.; Schenter, R.E.; Mann, F.M.; Ikeda, Y.

1991-01-01

The fusion materials irradiation facility (FMIF) is a neutron source generator that will produce a high-intensity 14-MeV neutron field for testing candidate fusion materials under reactor irradiation conditions. The construction of such a facility is one of the very important development stages toward realization of fusion energy as a practical energy source for electricity production. As a result of the high-intensity neutron field, 10 MW/m 2 or more equivalent neutron wall loading, and the relatively high-energy (10- to 20-MeV) neutrons, the FMIF, as future fusion reactors, also bears the potential capability of producing a significant quantity of radioisotopes. A study is being conducted to identify the potential capability of the FMIF to produce radioisotopes for medical and industrial applications. Two types of radioisotopes are involved: one is already available; the second might not be readily available using conventional production methods. For those radioisotopes that are not readily available, the FMIF could develop significant benefits for future generations as a result of the availability of such radioisotopes for medical or industrial applications. The current production of radioisotopes could help finance the operation of the FMIF for irradiating the candidate fusion materials; thus this concept is attractive. In any case, nuclear data are needed for calculating the neutron flux and spectrum in the FMIF and the potential production rates of these isotopes. In this paper, the authors report the result of a preliminary investigation on the production of 99 Mo, the parent radioisotope for 99m Tc

Comments on “An economic order quantity (EOQ for items with imperfect quality and inspection errors”

Directory of Open Access Journals (Sweden)

Hui-Ming Teng

2013-01-01

Full Text Available The purpose of these comments is to serve as a revision to the article by Khan, Jaber, & Bonney [2011, An economic order quantity (EOQ for items with imperfect quality and inspection errors, International Journal of Production Economics, 133: 113–118]. This commenting paper first suggests that the revenue function derived in Khan et al. (2011 is unrealistic, and then offers revisions to complement the shortcomings.

Association between work-family conflict and smoking quantity among daily smokers.

Science.gov (United States)

Macy, Jonathan T; Chassin, Laurie; Presson, Clark C

2013-11-01

Recent work demonstrated a direct relation between work-family conflict and likelihood of smoking. This study furthered this area of research by (a) testing the association between work-family conflict and smoking quantity and (b) testing demographic, workplace, and home factors as moderators of this relation. Participants (N = 423) were daily smokers from a Midwestern community-based sample. Ordinal regression analysis tested work-to-home and home-to-work conflict as predictors (after controlling for demographic characteristics, home factors, and workplace factors) of smoking quantity. Additionally, we tested whether the demographic, home, and workplace factors moderated the effects of work-to-home conflict and home-to-work conflict on smoking quantity. Males (OR = 8.81, p = .005), older participants (OR = 1.09, p = .012), those with less educational attainment (OR = 1.87, p = .001), those who reported lower levels of workplace smoking restrictions (OR = 0.87, p = .019), and those who reported higher levels of work-to-home conflict (OR = 1.39, p = .026) smoked more cigarettes per day. There was no significant main effect of home-to-work conflict on smoking quantity (OR = 1.46, p = .099). A significant interaction (OR = 0.55, p = .043) revealed that home-to-work conflict was associated with smoking quantity for females but not for males. After controlling for demographic characteristics and potential confounders, work-to-home conflict had a negative impact on smoking quantity for all participants, and home-to-work conflict was associated with smoking quantity for women. Workplace wellness programs to reduce smoking among employees should take into account the direction of conflict and how the effect of the conflict on smoking behavior may vary based on other factors.

Investor Behavior and Flow-Through Capability in the US Stock Market

Directory of Open Access Journals (Sweden)

Carlos eCano

2016-05-01

Full Text Available This paper analyzes investor behavior depending on the flow-through capability in the US stock market, because investors seek protection from inflation rate changes, and the flow-through capability (a firm’s ability to transmit inflation shocks to the prices of its products and services is a key factor in investment decisions. Our estimates of the flow-through capability of firms listed on the US stock exchange at the sector level are significantly different among industries, and we demonstrate a direct relationship between changes in stock prices (at the sector level and flow-through capability. These results would be relevant because they have important implications on investor behavior.

Quantities of natural gas transported in January-December 2009

International Nuclear Information System (INIS)

2010-01-01

GRTgaz is a European leader in natural gas transmission, a world expert in gas transmission networks and systems, and an operator firmly committed to the energy transition. It owns and operates the gas transmission network throughout most of France and it manages the transmission network in Germany, thereby helping to ensure correct operation of the French and European gas market. It contributes to the energy security of regional supply systems and performs a public service mission to ensure the continuity of consumer supply. This document presents the monthly key figures of GRTgaz activity in 2009: Total quantities transmitted by GRTgaz (Inputs to the GRTgaz network/Outputs from the GRTgaz network); Maximum and minimum daily flow (Daily quantities transported, Daily consumption, Daily inputs excluding storage); Quantities exchanged on the wholesale market; Consumption on the GRTgaz Network (gross monthly consumption and Average monthly temperatures)

Synthesis of pure iron magnetic nanoparticles in large quantity

International Nuclear Information System (INIS)

Tiwary, C S; Kashyap, S; Chattopadhyay, K; Biswas, K

2013-01-01

Free nanoparticles of iron (Fe) and their colloids with high saturation magnetization are in demand for medical and microfluidic applications. However, the oxide layer that forms during processing has made such synthesis a formidable challenge. Lowering the synthesis temperature decreases rate of oxidation and hence provides a new way of producing pure metallic nanoparticles prone to oxidation in bulk amount (large quantity). In this paper we have proposed a methodology that is designed with the knowledge of thermodynamic imperatives of oxidation to obtain almost oxygen-free iron nanoparticles, with or without any organic capping by controlled milling at low temperatures in a specially designed high-energy ball mill with the possibility of bulk production. The particles can be ultrasonicated to produce colloids and can be bio-capped to produce transparent solution. The magnetic properties of these nanoparticles confirm their superiority for possible biomedical and other applications. (paper)

Approaches for Sustaining and Building Management and Leadership Capability in VET Providers

Science.gov (United States)

Callan, Victor; Mitchell, John; Clayton, Berwyn; Smith, Larry

2007-01-01

This study examines the existing and potential strategies for sustaining and building greater levels of management and leadership capability in training organisations. The research report is one of the products of a nationally based research consortium: Supporting vocational education and training (VET) providers in building capability for the…

Review on Quantity of Hexanediol Diacrylate (HDDA) Used as Sensitizer in Production of Radiation Pre vulcanized Natural Rubber Latex (RVNRL)

International Nuclear Information System (INIS)

Sofian Ibrahim; Syuhada Ramli; Mohd Noorwadi Mat Lazim

2016-01-01

One of the main factors that caused RVNRL failed to be marketed widely is lack of mechanical properties; low tensile strength (about 20 MPa). In these experiments, the quantity of Hexanediol diacrylate (HDDA) used in the preparation RVNRL was revised in order to improve the mechanical properties RVNRL. (author)

Financial Capability:New Evidence for Ireland

OpenAIRE

Keeney, Mary J.; O’Donnell, Nuala

2009-01-01

Recent increases in financial innovation, particularly in the Anglo-Saxon banking culture, have seen a considerable growth in the amount of financial products available to the general public. Simultaneously, many workers are increasingly assuming responsibility for planning for their future pensions. This allied to increased life expectancy necessitates a greater degree of financial capability amongst the general public. This study has empirically examined this issue for the first time in an ...

A shared system of representation governing quantity discrimination in canids

Directory of Open Access Journals (Sweden)

Joseph M Baker

2012-10-01

Full Text Available One way to investigate the evolution of cognition is to compare the abilities of phylogenetically related species. The domestic dog (Canis lupus familiaris, for example, still shares cognitive abilities with the coyote (C. latrans. Both of these canids possess the ability to make psychophysical less/more discriminations of food based on quantity. Like many other species including humans, this ability is mediated by Weber’s Law: discrimination of continuous quantities is dependent on the ratio between the two quantities. As two simultaneously presented quantities of food become more similar, choice of the large or small option becomes random in both dogs and coyotes. It remains unknown, however, whether these closely related species within the same family—one domesticated, and one wild—make such quantitative comparisons with comparable accuracy. Has domestication honed or diminished this quantitative ability? Might different selective and ecological pressures facing coyotes drive them to be more or less able to accurately represent and discriminate food quantity than domesticated dogs? This study is an effort to elucidate this question concerning the evolution of non-verbal quantitative cognition.Here, we tested the quantitative discrimination ability of 16 domesticated dogs. Each animal was given 9 trials in which two different quantities of food were simultaneously displayed to them. The domesticated dogs’ performance on this task was then compared directly to the data from 16 coyotes’ performance on this same task reported by Baker and colleagues (2011.The quantitative discrimination abilities between the two species were strikingly similar. Domesticated dogs demonstrated similar quantitative sensitivity as coyotes, suggesting that domestication may not have significantly altered the psychophysical discrimination abilities of canids. Instead, this study provides further evidence for similar nonverbal quantitative abilities across

Variation in Quantity of Heat Produced from Charcoal of Prosopis ...

African Journals Online (AJOL)

Data were collected using the copper calorimeter, a thermometer, an air tight burner and a weight balance. The results showed a gradual decrease in the quantity of heat produced as combustion time increased from 10 40 minutes in all wood species. Significant differences (p<0.05) in the quantity of heat produced both ...

Uncertainties and correlations for the 56Fe damage cross sections and spectra averaged quantities based on TENDL-TMC

International Nuclear Information System (INIS)

Simakov, S.P.; Konobeyev, A.Yu.; Koning, A.

2016-01-01

The goal of this work is a calculation of the covariance matrices for the physical quantities used to characterize the neutron induced radiation damage in the materials. Such quantities usually encompass: the charged particles kinetic energy deposition KERMA (locally deposited nuclear heating), damage energy (to calculate then the number of displaced atoms) and gas production cross sections [(n,xα), (n,xt), (n,xp) … to calculate then transmuting of target nuclei to gases]. The uncertainties and energy-energy or reaction-reaction correlations for such quantities were not assessed so far, whereas the covariances for many underlying cross sections are often presented in the evaluated data libraries. Due to the dependence of damage quantities on many reactions channels, on both total and differential cross sections, and in particular on the energy distribution of reaction recoils, the evaluation of uncertainty is not straightforward. To reach a goal, we used the method based on idea of Total Monte Carlo application to the Nuclear Data. This report summarises the current results for evaluation, validation and representation in the ENDF-6 format of the radiation damage covariances for n + 56 Fe from thermal energy up to 20 MeV. This study was motivated by the IAEA Coordinated Research Project ''Primary Radiation Damage Cross Sections'' and by present dedicated Technical Meeting “Nuclear Reaction Data and Uncertainties for Radiation Damage”

Radix Achyranthis Bidentatae improves learning and memory capabilities in ovariectomized rats

Institute of Scientific and Technical Information of China (English)

Yuefen Wang; Ya Xu; Yanshu Pan; Weihong Li; Wei Zhang; Yang Liu; Jing Jia; Pengtao Li

2013-01-01

Kidney-tonifying recipe can reduce the accumulation of advanced glycation end products, prevent neuronal degeneration and improve cognitive functions in ovariectomized rats. Radix Achyranthis Bidentatae alcohol extracts may dose-dependently inhibit non-enzymatic saccharification in vitro. This study aimed to examine the effect of Radix Achyranthis Bidentatae on advanced glycation end products and on learning and memory capabilities in ovariectomized rats. Ovariectomized rats were treated with Radix Achyranthis Bidentatae alcohol extracts (containing 1.5 g/kg crude drug) or 0.1% aminoguanidine for 12 weeks and behavioral testing was performed with the Y-electrical maze. This test revealed that Radix Achyranthis Bidentatae and aminoguanidine could improve the learning and memory capabilities of ovariectomized rats. Results of competitive enzyme-linked immunosorbent assay showed that treatment with Radix Achyranthis Bidentatae or aminoguanidine reduced the accumulation of advanced glycation end products in the frontal cortex of ovariectomized rats, while increasing content in the blood and urine. Biochemical tests showed that treatment with Radix Achyranthis Bidentatae or aminoguanidine decreased superoxide dismutase activity in the serum and frontal cortex, and increased serum levels of glutathione peroxidase in ovariectomized rats. In addition, there was no apparent effect on malondialdehyde levels. These experimental findings indicate that Radix Achyranthis Bidentatae inhibits production of advanced glycation end products and its accumulation in brain tissue, and improves learning and memory capabilities in ovariectomized rats. These effects may be associated with an anti-oxidative action of the extract.

Multimodal semantic quantity representations: further evidence from Korean Sign Language

Directory of Open Access Journals (Sweden)

Frank eDomahs

2012-01-01

Full Text Available Korean deaf signers performed a number comparison task on pairs of Arabic digits. In their RT profiles, the expected magnitude effect was systematically modified by properties of number signs in Korean Sign Language in a culture-specific way (not observed in hearing and deaf Germans or hearing Chinese. We conclude that finger-based quantity representations are automatically activated even in simple tasks with symbolic input although this may be irrelevant and even detrimental for task performance. These finger-based numerical representations are accessed in addition to another, more basic quantity system which is evidenced by the magnitude effect. In sum, these results are inconsistent with models assuming only one single amodal representation of numerical quantity.

Dynamic capabilities and innovation capabilities: The case of the ‘Innovation Clinic’

Directory of Open Access Journals (Sweden)

Fred Strønen

2017-01-01

Full Text Available In this explorative study, we investigate the relationship between dynamic capabilities and innovation capabilities. Dynamic capabilities are at the core of strategic management in terms of how firms can ensure adaptation to changing environments over time. Our paper follows two paths of argumentation. First, we review and discuss some major contributions to the theories on ordinary capabilities, dynamic capabilities, and innovation capabilities. We seek to identify different understandings of the concepts in question, in order to clarify the distinctions and relationships between dynamic capabilities and innovation capabilities. Second, we present a case study of the ’Innovation Clinic’ at a major university hospital, including four innovation projects. We use this case study to explore and discuss how dynamic capabilities can be extended, as well as to what extent innovation capabilities can be said to be dynamic. In our conclusion, we discuss the conditions for nurturing ‘dynamic innovation capabilities’ in organizations.

The effects of quantity and depth of processing on children's time perception.

Science.gov (United States)

Arlin, M

1986-08-01

Two experiments were conducted to investigate the effects of quantity and depth of processing on children's time perception. These experiments tested the appropriateness of two adult time-perception models (attentional and storage size) for younger ages. Children were given stimulus sets of equal time which varied by level of processing (deep/shallow) and quantity (list length). In the first experiment, 28 children in Grade 6 reproduced presentation times of various quantities of pictures under deep (living/nonliving categorization) or shallow (repeating label) conditions. Students also compared pairs of durations. In the second experiment, 128 children in Grades K, 2, 4, and 6 reproduced presentation times under similar conditions with three or six pictures and with deep or shallow processing requirements. Deep processing led to decreased estimation of time. Higher quantity led to increased estimation of time. Comparative judgments were influenced by quantity. The interaction between age and depth of processing was significant. Older children were more affected by depth differences than were younger children. Results were interpreted as supporting different aspects of each adult model as explanations of children's time perception. The processing effect supported the attentional model and the quantity effect supported the storage size model.

Testing quantity theory of money for the Turkish economy

OpenAIRE

Levent, Korap

2007-01-01

In this paper, it is tried to test the main assumptions of the Quantity Theory of Money for the Turkish economy. Using some contemporaneous estimation techniques to examine the long-run stationary economic relationships on which the quantity theory is constructed, it is found that stationary characteristics of the velocitities of narrowly and broadly defined monetary aggregates cannot be rejected. However, monetary aggregates seem to be endogenous for the long-run evoluation of prices and rea...

Association Between Work–Family Conflict and Smoking Quantity Among Daily Smokers

Science.gov (United States)

2013-01-01

Introduction: Recent work demonstrated a direct relation between work–family conflict and likelihood of smoking. This study furthered this area of research by (a) testing the association between work–family conflict and smoking quantity and (b) testing demographic, workplace, and home factors as moderators of this relation. Methods: Participants (N = 423) were daily smokers from a Midwestern community-based sample. Ordinal regression analysis tested work-to-home and home-to-work conflict as predictors (after controlling for demographic characteristics, home factors, and workplace factors) of smoking quantity. Additionally, we tested whether the demographic, home, and workplace factors moderated the effects of work-to-home conflict and home-to-work conflict on smoking quantity. Results: Males (OR = 8.81, p = .005), older participants (OR = 1.09, p = .012), those with less educational attainment (OR = 1.87, p = .001), those who reported lower levels of workplace smoking restrictions (OR = 0.87, p = .019), and those who reported higher levels of work-to-home conflict (OR = 1.39, p = .026) smoked more cigarettes per day. There was no significant main effect of home-to-work conflict on smoking quantity (OR = 1.46, p = .099). A significant interaction (OR = 0.55, p = .043) revealed that home-to-work conflict was associated with smoking quantity for females but not for males. Conclusions: After controlling for demographic characteristics and potential confounders, work-to-home conflict had a negative impact on smoking quantity for all participants, and home-to-work conflict was associated with smoking quantity for women. Workplace wellness programs to reduce smoking among employees should take into account the direction of conflict and how the effect of the conflict on smoking behavior may vary based on other factors. PMID:23709611

Quantities of natural gas transported in August-December 2007

International Nuclear Information System (INIS)

2008-01-01

GRTgaz is a European leader in natural gas transmission, a world expert in gas transmission networks and systems, and an operator firmly committed to the energy transition. It owns and operates the gas transmission network throughout most of France and it manages the transmission network in Germany, thereby helping to ensure correct operation of the French and European gas market. It contributes to the energy security of regional supply systems and performs a public service mission to ensure the continuity of consumer supply. This document presents the available monthly key figures of GRTgaz activity from August to December 2007: Total quantities transmitted by GRTgaz (Inputs to the GRTgaz network/Outputs from the GRTgaz network); Maximum and minimum daily flow (Daily quantities transported, Daily consumption, Daily inputs excluding storage); Quantities exchanged on the wholesale market; Consumption on the GRTgaz Network (gross monthly consumption and Average monthly temperatures)

Capability ethics

OpenAIRE

Robeyns, Ingrid

2012-01-01

textabstractThe capability approach is one of the most recent additions to the landscape of normative theories in ethics and political philosophy. Yet in its present stage of development, the capability approach is not a full-blown normative theory, in contrast to utilitarianism, deontological theories, virtue ethics, or pragmatism. As I will argue in this chapter, at present the core of the capability approach is an account of value, which together with some other (more minor) normative comm...

Symbols and definitions of quantities and units in isotope stoichiometry

International Nuclear Information System (INIS)

Junghans, P.; Krumbiegel, P.; Faust, H.

1982-01-01

On the basis of the International System of Units and recent recommendations of the IUPAC on 'Symbols and Terminology for Physicochemical Quantities and Units' a system is proposed of uniform and unambiguous symbols and definitions of quantities and units used in the isotope dilution technique. The close relationship between isotope stoichiometry and common stoichiometry is demonstrated. (author)

Production of functionalized polyhydroxyalkanoates by genetically modified Methylobacterium extorquens strains

Directory of Open Access Journals (Sweden)

Miguez Carlos B

2010-09-01

Full Text Available Abstract Background Methylotrophic (methanol-utilizing bacteria offer great potential as cell factories in the production of numerous products from biomass-derived methanol. Bio-methanol is essentially a non-food substrate, an advantage over sugar-utilizing cell factories. Low-value products as well as fine chemicals and advanced materials are envisageable from methanol. For example, several methylotrophic bacteria, including Methylobacterium extorquens, can produce large quantities of the biodegradable polyester polyhydroxybutyric acid (PHB, the best known polyhydroxyalkanoate (PHA. With the purpose of producing second-generation PHAs with increased value, we have explored the feasibility of using M. extorquens for producing functionalized PHAs containing C-C double bonds, thus, making them amenable to future chemical/biochemical modifications for high value applications. Results Our proprietary M. extorquens ATCC 55366 was found unable to yield functionalized PHAs when fed methanol and selected unsaturated carboxylic acids as secondary substrates. However, cloning of either the phaC1 or the phaC2 gene from P. fluorescens GK13, using an inducible and regulated expression system based on cumate as inducer (the cumate switch, yielded recombinant M. extorquens strains capable of incorporating modest quantities of C-C double bonds into PHA, starting from either C6= and/or C8=. The two recombinant strains gave poor results with C11=. The strain containing the phaC2 gene was better at using C8= and at incorporating C-C double bonds into PHA. Solvent fractioning indicated that the produced polymers were PHA blends that consequently originated from independent actions of the native and the recombinant PHA synthases. Conclusions This work constitutes an example of metabolic engineering applied to the construction of a methanol-utilizing bacterium capable of producing functionalized PHAs containing C-C double bonds. In this regard, the PhaC2 synthase

LHC Capabilities for Quarkonia

CERN Document Server

Petrushanko, Sergey

2008-01-01

The measurement of the charmonium and bottomonium resonances in nucleus-nucleus collisions provides crucial information on high-density QCD matter. First, the suppression of quarkonia production is generally agreed to be one of the most direct probes of quark-gluon plasma formation. The observation of anomalous J/$\\psi$ suppression at the CERN-SPS and at RHIC is well established but the clarification of some important remaining questions requires equivalent studies of the $\\Upsilon$ family, only possible at the LHC energies. Second, the production of heavy-quarks proceeds mainly via gluon-gluon fusion processes and, as such, is sensitive to saturation of the gluon density at low-x in the nucleus. Measured departures from the expected vacuum quarkonia cross-sections in Pb+Pb collisions at the LHC will thus provide valuable information not only on the thermodynamical state of the produced partonic medium, but also on the initial-state modifications of the nuclear parton distribution functions. The capabilities ...

Varieties of Quantity Estimation in Children

Science.gov (United States)

Sella, Francesco; Berteletti, Ilaria; Lucangeli, Daniela; Zorzi, Marco

2015-01-01

In the number-to-position task, with increasing age and numerical expertise, children's pattern of estimates shifts from a biased (nonlinear) to a formal (linear) mapping. This widely replicated finding concerns symbolic numbers, whereas less is known about other types of quantity estimation. In Experiment 1, Preschool, Grade 1, and Grade 3…

40 CFR 273.8 - Applicability-household and conditionally exempt small quantity generator waste.

Science.gov (United States)

2010-07-01

... conditionally exempt small quantity generator waste. 273.8 Section 273.8 Protection of Environment ENVIRONMENTAL....8 Applicability—household and conditionally exempt small quantity generator waste. (a) Persons... universal wastes defined at § 273.9; and/or (2) Conditionally exempt small quantity generator wastes that...

Quantity and quality: unifying food web and ecosystem perspectives on the role of resource subsidies in freshwaters.

Science.gov (United States)

Marcarelli, Amy M; Baxter, Colden V; Mineau, Madeleine M; Hall, Robert O

2011-06-01

Although the study of resource subsidies has emerged as a key topic in both ecosystem and food web ecology, the dialogue over their role has been limited by separate approaches that emphasize either subsidy quantity or quality. Considering quantity and quality together may provide a simple, but previously unexplored, framework for identifying the mechanisms that govern the importance of subsidies for recipient food webs and ecosystems. Using a literature review of > 90 studies of open-water metabolism in lakes and streams, we show that high-flux, low-quality subsidies can drive freshwater ecosystem dynamics. Because most of these ecosystems are net heterotrophic, allochthonous inputs must subsidize respiration. Second, using a literature review of subsidy quality and use, we demonstrate that animals select for high-quality food resources in proportions greater than would be predicted based on food quantity, and regardless of allochthonous or autochthonous origin. This finding suggests that low-flux, high-quality subsidies may be selected for by animals, and in turn may disproportionately affect food web and ecosystem processes (e.g., animal production, trophic energy or organic matter flow, trophic cascades). We then synthesize and review approaches that evaluate the role of subsidies and explicitly merge ecosystem and food web perspectives by placing food web measurements in the context of ecosystem budgets, by comparing trophic and ecosystem production and fluxes, and by constructing flow food webs. These tools can and should be used to address future questions about subsidies, such as the relative importance of subsidies to different trophic levels and how subsidies may maintain or disrupt ecosystem stability and food web interactions.

Estimating productivity with multi-product firms, pricing heterogeneity and the role of international trade

DEFF Research Database (Denmark)

Smeets, Valerie Anne Rolande; Warzynski, Frederic Michel Patrick

In this paper, we analyze the relationship between exports, imports and firm productivity. We use a rich product-firm-level dataset providing both revenue and quantities of all products for a large panel of Danish manufacturing firms over the period 1998-2008 and link it to firms’ international...

MARKETING CAPABILITIES FOR INNOVATION-BASED COMPETITIVE ADVANTAGE IN THE SLOVENIAN MARKET

Directory of Open Access Journals (Sweden)

Vojko Potocan

2013-01-01

Full Text Available The primary role of marketing within the competitive advantage is innovation. The customer value-based differentiation strategies will drive the company’s market research efforts, its selection of target markets, its product development processes, its market communications programs, and its delivery processes. These processes require many specific capabilities that enable the firm to carry out activities necessary to move its products or services through the value chain. We must explore the role of distinctive marketing capabilities in competitive strategy of the company. As sources of competitive advantage, companies try to create their product or service differentiation by developing higher product or service quality, by using their knowledge to solving marketing problems, by communicating with their customers, and by satisfying customer’s needs. We also would like to confirm that superior customer service lead to company’s innovation. The paper closes with the implications of the findings and highlights promising future research avenues.

Identification and comparison of structural factors of innovation capability in ESCO with desirable status

Directory of Open Access Journals (Sweden)

Fatemeh Jalali

2014-12-01

Full Text Available The present study describes the identification and comparison of structural factors of innovation capability in Esfahan Steel Company (ESCO. Innovation is a crucial factor in growth, success, and survival of organizations. Since the innovation for organizations is not possible without the level of innovation capabilities and the need for steel products and imports of goods from developed countries has greatly increased, this study intends to investigate the factors affecting the subject that may be able to increase the production and reduce the need to import it. Evaluation of the innovation capability factors of ESCO compared with its desired status in industry can help companies develop innovative strategies and also achieve organizational goals. Statistical analysis methods and mean comparison test by examining the structure of the innovation capability in the form of a standard questionnaire was employed. The findings suggest that the innovation capability in the existing situation of ESCO in comparison with the desired situation is significantly different.

Gossiping Capabilities

DEFF Research Database (Denmark)

Mogensen, Martin; Frey, Davide; Guerraoui, Rachid

Gossip-based protocols are now acknowledged as a sound basis to implement collaborative high-bandwidth content dissemination: content location is disseminated through gossip, the actual contents being subsequently pulled. In this paper, we present HEAP, HEterogeneity Aware gossip Protocol, where...... nodes dynamically adjust their contribution to gossip dissemination according to their capabilities. Using a continuous, itself gossip-based, approximation of relative capabilities, HEAP dynamically leverages the most capable nodes by (a) increasing their fanouts (while decreasing by the same proportion...... declare a high capability in order to augment their perceived quality without contributing accordingly. We evaluate HEAP in the context of a video streaming application on a 236 PlanetLab nodes testbed. Our results shows that HEAP improves the quality of the streaming by 25% over a standard gossip...

Toyota production system - one example to shipbuilding industry

Directory of Open Access Journals (Sweden)

Delmo Alves de Moura

2017-09-01

Full Text Available The shipbuilding system can use the techniques used in the Toyota Production System as an example for its production process. Production should be lean, minimize defects, stop production and reduce or eliminate inventories. Lean production is regarded by many as simply an enhancement of mass production methods, whereas agility implies breaking out of the mass production mould and producing much more highly customized products - where the customer wants them in any quantity. In a product line context, it amounts to striving for economies of scope, rather than economies of scale ideally serving ever smaller niche markets, even quantities of one, without the high cost traditionally associated with customization. A lean company may be thought of as a very productive and cost efficient producer of goods or services.

Long-term biomass resources for energy aim - quantities, costs and conditions of the market

International Nuclear Information System (INIS)

Gylling, M.; Abildtrup, J.; Vodder Nielsen, K.; Petersen, S.M.; Varming, S.

2001-01-01

This project assesses the agricultural, technical and economic possibilities for producing the planned quantity of energy crops in year 2015. The assessments in this project are based on two essential assumptions: 1) The total demand for straw and energy crops to meet the energy plans is added up, and the available amount of straw is used first and energy crops will be used for the remaining amount. 2) As long as the present economic conditions for set-aside prevails, it will only be the set-aside areas that will be available for energy crop production. Energy crops are not seen as economic competitive with other cash-crops on the reform areas.Three different scenarios for the agricultural crop production up to year 2015 are outlined; a reference scenario where the current development is extrapolated; an environment scenario in which a higher degree of environmental awareness is taken into account and a market scenario in which the economic competitiveness of agricultural production gains more focus. (au)

Charaterisation of function spaces via mollification; fractal quantities for distributions

Directory of Open Access Journals (Sweden)

Hans Triebel

2003-01-01

Full Text Available The aim of this paper is twofold. First we characterise elements f belonging to the Besov spaces Bpqs(ℝn with s∈ℝ,  0quantities for distributions generalising well-known corresponding quantities for Radon measures.

Optimization of refinery product blending by using linear programming

International Nuclear Information System (INIS)

Ristikj, Julija; Tripcheva-Trajkovska, Loreta; Rikaloski, Ice; Markovska, Liljana

1999-01-01

The product slate of a simple refinery consists mainly of liquefied petroleum gas, leaded and unleaded gasoline, jet fuel, diesel fuel, extra light heating oil and fuel oil. The quality of the oil products (fuels) for sale has to comply with the adopted standards for liquid fuels, and the produced quantities have to be comply with the market needs. The oil products are manufactured by blending two or more different fractions which quantities and physical-chemical properties depend on the crude oil type, the way and conditions of processing, and at the same time the fractions are used to blend one or more products. It is in producer's interest to do the blending in an optimal way, namely, to satisfy the requirements for the oil products quality and quantity with a maximal usage of the available fractions and, of course, with a maximal profit out of the sold products. This could be accomplished by applying linear programming, that is by using a linear model for oil products blending optimization. (Author)

An analysis of the additional fission product release phenomena

International Nuclear Information System (INIS)

Takeda, Tsuneo; Nagai, Hitoshi

1978-09-01

The additional fission product release behavior through a defect hole on the cladding of fuel rods has been studied qualitatively with a computer program CODAC-ARFP. The additional fission product release phenomena are described as qualitative evaluation. The additional fission product release behavior in coolant temperature and pressure fluctuations and in reactor start-up and shut-down depends on coolant water flow behavior into and from the free space of fuel rods through a defect hole. Based on the results of evaluations, the experimental results with an inpile water loop OWL-1 are described in detail. The estimation methods of fission product quantity in the free space and fission product release ratio (quantity released into the coolant/quantity in the free space before beginning of release) are necessary for analysis of the fission product release behavior; the estimation method of water flow through a defect hole is also necessary. In development of the above estimation methods, outpile and capsule experiments supporting the additional fission product release experiments are required. (author)

The production of radionuclides for nuclear medicine from a compact, low-energy accelerator system.

Science.gov (United States)

Webster, William D; Parks, Geoffrey T; Titov, Dmitry; Beasley, Paul

2014-05-01

The field of nuclear medicine is reliant on radionuclides for medical imaging procedures and radioimmunotherapy (RIT). The recent shut-downs of key radionuclide producers have highlighted the fragility of the current radionuclide supply network, however. To ensure that nuclear medicine can continue to grow, adding new diagnostic and therapy options to healthcare, novel and reliable production methods are required. Siemens are developing a low-energy, high-current - up to 10 MeV and 1 mA respectively - accelerator. The capability of this low-cost, compact system for radionuclide production, for use in nuclear medicine procedures, has been considered. The production of three medically important radionuclides - (89)Zr, (64)Cu, and (103)Pd - has been considered, via the (89)Y(p,n), (64)Ni(p,n) and (103)Rh(p,n) reactions, respectively. Theoretical cross-sections were generated using TALYS and compared to experimental data available from EXFOR. Stopping power values generated by SRIM have been used, with the TALYS-generated excitation functions, to calculate potential yields and isotopic purity in different irradiation regimes. The TALYS excitation functions were found to have a good agreement with the experimental data available from the EXFOR database. It was found that both (89)Zr and (64)Cu could be produced with high isotopic purity (over 99%), with activity yields suitable for medical diagnostics and therapy, at a proton energy of 10MeV. At 10MeV, the irradiation of (103)Rh produced appreciable quantities of (102)Pd, reducing the isotopic purity. A reduction in beam energy to 9.5MeV increased the radioisotopic purity to 99% with only a small reduction in activity yield. This work demonstrates that the low-energy, compact accelerator system under development by Siemens would be capable of providing sufficient quantities of (89)Zr, (64)Cu, and (103)Pd for use in medical diagnostics and therapy. It is suggested that the system could be used to produce many other

What Difference Does Quantity Make? On the Epistemology of Big Data in Biology

Science.gov (United States)

Leonelli, Sabina

2015-01-01

Is big data science a whole new way of doing research? And what difference does data quantity make to knowledge production strategies and their outputs? I argue that the novelty of big data science does not lie in the sheer quantity of data involved, but rather in (1) the prominence and status acquired by data as commodity and recognised output, both within and outside of the scientific community; and (2) the methods, infrastructures, technologies, skills and knowledge developed to handle data. These developments generate the impression that data-intensive research is a new mode of doing science, with its own epistemology and norms. To assess this claim, one needs to consider the ways in which data are actually disseminated and used to generate knowledge. Accordingly, this paper reviews the development of sophisticated ways to disseminate, integrate and re-use data acquired on model organisms over the last three decades of work in experimental biology. I focus on online databases as prominent infrastructures set up to organise and interpret such data; and examine the wealth and diversity of expertise, resources and conceptual scaffolding that such databases draw upon. This illuminates some of the conditions under which big data need to be curated to support processes of discovery across biological subfields, which in turn highlights the difficulties caused by the lack of adequate curation for the vast majority of data in the life sciences. In closing, I reflect on the difference that data quantity is making to contemporary biology, the methodological and epistemic challenges of identifying and analyzing data given these developments, and the opportunities and worries associated to big data discourse and methods. PMID:25729586

What Difference Does Quantity Make? On the Epistemology of Big Data in Biology.

Science.gov (United States)

Leonelli, Sabina

2014-06-01

Is big data science a whole new way of doing research? And what difference does data quantity make to knowledge production strategies and their outputs? I argue that the novelty of big data science does not lie in the sheer quantity of data involved, but rather in (1) the prominence and status acquired by data as commodity and recognised output, both within and outside of the scientific community; and (2) the methods, infrastructures, technologies, skills and knowledge developed to handle data. These developments generate the impression that data-intensive research is a new mode of doing science, with its own epistemology and norms. To assess this claim, one needs to consider the ways in which data are actually disseminated and used to generate knowledge. Accordingly, this paper reviews the development of sophisticated ways to disseminate, integrate and re-use data acquired on model organisms over the last three decades of work in experimental biology. I focus on online databases as prominent infrastructures set up to organise and interpret such data; and examine the wealth and diversity of expertise, resources and conceptual scaffolding that such databases draw upon. This illuminates some of the conditions under which big data need to be curated to support processes of discovery across biological subfields, which in turn highlights the difficulties caused by the lack of adequate curation for the vast majority of data in the life sciences. In closing, I reflect on the difference that data quantity is making to contemporary biology, the methodological and epistemic challenges of identifying and analyzing data given these developments, and the opportunities and worries associated to big data discourse and methods.

What difference does quantity make? On the epistemology of Big Data in biology

Directory of Open Access Journals (Sweden)

S Leonelli

2014-07-01

Full Text Available Is Big Data science a whole new way of doing research? And what difference does data quantity make to knowledge production strategies and their outputs? I argue that the novelty of Big Data science does not lie in the sheer quantity of data involved, but rather in (1 the prominence and status acquired by data as commodity and recognised output, both within and outside of the scientific community and (2 the methods, infrastructures, technologies, skills and knowledge developed to handle data. These developments generate the impression that data-intensive research is a new mode of doing science, with its own epistemology and norms. To assess this claim, one needs to consider the ways in which data are actually disseminated and used to generate knowledge. Accordingly, this article reviews the development of sophisticated ways to disseminate, integrate and re-use data acquired on model organisms over the last three decades of work in experimental biology. I focus on online databases as prominent infrastructures set up to organise and interpret such data and examine the wealth and diversity of expertise, resources and conceptual scaffolding that such databases draw upon. This illuminates some of the conditions under which Big Data needs to be curated to support processes of discovery across biological subfields, which in turn highlights the difficulties caused by the lack of adequate curation for the vast majority of data in the life sciences. In closing, I reflect on the difference that data quantity is making to contemporary biology, the methodological and epistemic challenges of identifying and analysing data given these developments, and the opportunities and worries associated with Big Data discourse and methods.

Prices versus Quantities

DEFF Research Database (Denmark)

Hansen, Lars Gårn; Jensen, Frank

illustrate that this result does not generalise to a search fishery, where marginal costs are allowed to depend on harvest. Hansen et al (2008) study a fishery where non-compliance with regulations is a problem. When the regulator is uncertain about non-compliance (compliance uncertainty), then landing fees......Weitzman (2002) studies the regulation of a fishery characterised by constant marginal harvest costs and shows that price regulation performs better than quantity regulation when the regulator is uncertain about the biological reproduction function (ecological uncertainty). Here, we initially...... are the preferred type of regulation, and Hansen et al (2008) find that this result does generalise to a search fishery where marginal costs depend on harvest. In this paper, we simulate a stochastic stock-recruitment model for the Danish cod fishery in the Kategat capturing both ecological and compliance...

Allen's astrophysical quantities

CERN Document Server

2000-01-01

This new, fourth, edition of Allen's classic Astrophysical Quantities belongs on every astronomer's bookshelf. It has been thoroughly revised and brought up to date by a team of more than ninety internationally renowned astronomers and astrophysicists. While it follows the basic format of the original, this indispensable reference has grown to more than twice the size of the earlier editions to accommodate the great strides made in astronomy and astrophysics. It includes detailed tables of the most recent data on: - General constants and units - Atoms, molecules, and spectra - Observational astronomy at all wavelengths from radio to gamma-rays, and neutrinos - Planetary astronomy: Earth, planets and satellites, and solar system small bodies - The Sun, normal stars, and stars with special characteristics - Stellar populations - Cataclysmic and symbiotic variables, supernovae - Theoretical stellar evolution - Circumstellar and interstellar material - Star clusters, galaxies, quasars, and active galactic nuclei ...

Shadow Price Approach to Total Factor Productivity Measurement: With an Application to Finnish Grass-Silage Production

NARCIS (Netherlands)

Kuosmanen, T.K.; Post, T.; Sipiläinen, T.

2004-01-01

This paper explores an intermediate route between the Fisher and the Malmquist productivity indexes so as to minimize data requirements and assumptions about economic behavior of production units and their production technology. Assuming quantity data of inputs and outputs and the behavioral

Materials Capability Review Los Alamos National Laboratory April 29-May 2, 2012

Energy Technology Data Exchange (ETDEWEB)

Taylor, Antoinette J [Los Alamos National Laboratory

2012-04-20

Los Alamos National Laboratory (LANL) uses Capability Reviews to assess the quality and institutional integration of science, technology and engineering (STE) and to advise Laboratory Management on the current and future health of LANL STE. The capabilities are deliberately chosen to be crosscutting over the Laboratory and therefore will include experimental, theoretical and simulation disciplines from multiple line organizations. Capability Reviews are designed to provide a more holistic view of the STE quality, integration to achieve mission requirements, and mission relevance. The scope of these capabilities necessitate that there will be significant overlap in technical areas covered by capability reviews (e.g., materials research and weapons science and engineering). In addition, LANL staff may be reviewed in different capability reviews because of their varied assignments and expertise. The principal product of the Capability Review is the report that includes the review committee's assessments, recommendations, and recommendations for STE.

Patterns in new dimensionless quantities containing melting temperature, and their dependence on pressure

Directory of Open Access Journals (Sweden)

U. WALZER

1980-06-01

Full Text Available The relationships existing between melting temperature and other
macroscopic physical quantities are investigated. A new dimensionless
quantity Q(1 not containing the Grtineisen parameter proves to be suited for serving in future studies as a tool for the determination of the melting temperature in the outer core of the Earth. The pressure dependence of more general dimensionless quantities Q„ is determined analytically and, for the chemical elements, numerically, too. The patterns of various interesting dimensionless quantities are shown in the Periodic Table and compared.

Rights, goals, and capabilities

NARCIS (Netherlands)

van Hees, M.V.B.P.M

This article analyses the relationship between rights and capabilities in order to get a better grasp of the kind of consequentialism that the capability theory represents. Capability rights have been defined as rights that have a capability as their object (rights to capabilities). Such a

The enhancements and testing for the MCNPX depletion capability

International Nuclear Information System (INIS)

Fensin, M. L.; Hendricks, J. S.; Anghaie, S.

2008-01-01

Monte Carlo-linked depletion methods have gained recent interest due to the ability to more accurately model true system physics and better track the evolution of temporal nuclide inventory by simulating the actual physical process. The integration of INDER90 into the MCNPX Monte Carlo radiation transport code provides a completely self-contained Monte- Carlo-linked depletion capability in a single Monte Carlo code that is compatible with most nuclear criticality (KCODE) particle tracking features in MCNPX. MCNPX depletion tracks all necessary reaction rates and follows as many isotopes as cross section data permits in order to achieve a highly accurate temporal nuclide inventory solution. We describe here the depletion methodology dating from the original linking of MONTEBURNS and MCNP to the first public release of the integrated capability (MCNPX 2. 6.B, June, 2006) that has been reported previously. Then we further detail the many new depletion capability enhancements since then leading to the present capability. The H.B. Robinson benchmark calculation results are also reported. The new MCNPX depletion capability enhancements include: (1) allowing the modeling of as large a system as computer memory capacity permits; (2) tracking every fission product available in ENDF/B VII. 0; (3) enabling depletion in repeated structures geometries such as repeated arrays of fuel pins; (4) including metastable isotopes in burnup; and (5) manually changing the concentrations of key isotopes during different time steps to simulate changing reactor control conditions such as dilution of poisons to maintain criticality during burnup. These enhancements allow better detail to model the true system physics and also improve the robustness of the capability. The H.B. Robinson benchmark calculation was completed in order to determine the accuracy of the depletion solution. Temporal nuclide computations of key actinide and fission products are compared to the results of other

Birthday Cake Activity Structured Arrangement for Helping Children Determining Quantities

Directory of Open Access Journals (Sweden)

Neni Mariana

2010-07-01

Full Text Available Few researches have been concerned about relation between children’s spatial thinking and number sense. Narrowing for this small research, we focused on one component of spatial thinking, that is structuring objects, and one component of number senses, that is cardinality by determining quantities. This study focused on a design research that was conducted in Indonesia in which we investigated pre-school children’s (between 2 and 3.5 years old ability in making structured arrangement and their ability to determine the quantities by looking at the arrangements. The result shows us that some of the children were able to make such arrangement. However, the children found difficulties either to determine quantities from those arrangements or to compare some structures to easily recognize number of objects.

South African uranium resource and production capability estimates

International Nuclear Information System (INIS)

Camisani-Calzolari, F.A.G.M.; Toens, P.D.

1980-09-01

South Africa, along with Canada and the United States, submitted forecasts of uranium capacities and capabilites to the year 2025 for the 1979 'Red Book' edition. This report deals with the methodologies used in arriving at the South African forecasts. As the future production trends of the South African uranium producers cannot be confidently defined, chiefly because uranium is extracted as a by-product of the gold mining industry and is thus highly sensitive to market fluctuations for both uranium and gold, the Evaluation Group of the Atomic Energy Board has carried out numerous forecast exercises using current and historical norms and assuming various degrees of 'adverse', 'normal' and 'most favourable' conditions. The two exercises, which were submitted for the 'Red Book', are shown in the Appendices. This paper has been prepared for presentation to the Working Group on Methodologies for Forecasting Uranium Availability of the NEA/IAEA Steering Group on Uranium Resources [af

Experimental investigation on the relationship between sluice caisson shape of tidal power plant and the water discharge capability

Energy Technology Data Exchange (ETDEWEB)

Lee, Dal Soo; Oh, Sang-Ho; Yi, Jin-Hak; Park, Woo-Sun [Coastal Engineering and Ocean Energy Research Department, Korea Ocean Research and Development Institute, Ansan 426-744 (Korea); Cho, Hyu-Sang; Kim, Duk-Gu; Ahn, Suk-Jin [Technology Research and Development Institute, Hyein E and C Co. Ltd., Seoul 157-861 (Korea); Eom, Hyun-Min [Global Environment System Research Laboratory, National Institute of Meteorological Research/KMA, Seoul 156-720 (Korea)

2010-10-15

The change of water discharge capability of the sluice caisson of tidal power plant according to the change of geometrical shape of the sluice caisson was investigated by performing laboratory experiments. The major design parameters that constitute general shape of the sluice caisson were deduced and a total of 32 different shapes of sluice caisson models were subjected to the hydraulic experiments. For every sluice caisson model, the water discharge capability was estimated with five different flow rates and three different water level conditions. The experiments were carried out in an open channel flume with a great care to measure flow rate and water level accurately, which are key physical quantities in estimating the water discharge capability of the sluice caisson models. By analyzing the experimental results, influence of the respective design parameters on the performance of the sluice caisson was examined and the general guidelines to enhance the water discharge capability were suggested. The discharge coefficient of the best sluice caisson model ranged from 2.3 to 3.1 depending on the experimental conditions, which is far higher than the values that were adopted in the past feasibility studies in Korea. (author)

Capability maturity models in engineering companies: case study analysis

Directory of Open Access Journals (Sweden)

Titov Sergei

2016-01-01

Full Text Available In the conditions of the current economic downturn engineering companies in Russia and worldwide are searching for new approaches and frameworks to improve their strategic position, increase the efficiency of the internal business processes and enhance the quality of the final products. Capability maturity models are well-known tools used by many foreign engineering companies to assess the productivity of the processes, to elaborate the program of business process improvement and to prioritize the efforts to optimize the whole company performance. The impact of capability maturity model implementation on cost and time are documented and analyzed in the existing research. However, the potential of maturity models as tools of quality management is less known. The article attempts to analyze the impact of CMM implementation on the quality issues. The research is based on a case study methodology and investigates the real life situation in a Russian engineering company.

The Effects of Bioprocess Parameters on Cellulase Production with Trichoderma viride CMIT35

Directory of Open Access Journals (Sweden)

Teodor Vintila

2010-05-01

Full Text Available Fungal cellulases are well-studied, and have various applications in industry, health or agriculture. Species of Trichoderma can produce substantial amounts of endoglucanase, exoglucanase (saccharifying cellulases, and some strains are able to produce important quantities of β-glucosidase. A number of fungi were isolated abroad and screened for cellulolytic potential. In this study, the kinetics of cellulase production from an indigenous strain of T. viride CMIT35 is reported. Product formation parameters of different types of cellulases indicate that the studied strain of T. viride is capable of producing important levels of cellulases when grown on Mandels medium with wheat bran as carbon source. Furthermore, it was observed that production of endoglucanase reaches its maximum during exponential phase of growth, while exoglucanase during the stationary phase. Enzyme production by solid-state fermentation was also investigated and found to be more efficient than liquid state fermentation. High production of cellulase was noted at the following parameters for liquid cultures: 4% wheat bran, 5% inoculum, 180 r.p.m. agitation, pH 5; and 60% humidity in the case of solid state fermentation.

Consolidating indigenous capability for PHWR fuel manufacturing in India

Energy Technology Data Exchange (ETDEWEB)

Jayaraj, R.N., E-mail: cenfc@nfc.gov.in [Nuclear Fuel Complex, Dept. of Atomic Energy, Government of India, Hyderabad (India)

2010-07-01

Since inception of Nuclear Power Programme in India greater emphasis was laid on total self- reliance in Fuel manufacturing. For Pressurized Heavy Water Reactors (PHWRs), which forms a base for the first stage of the programme, an integrated approach was adopted encompassing different areas of expertise -Design, Construction and Operation of PHWRs; Heavy Water production and Fuel Design and Manufacturing technologies. For the first PHWR constructed about 35 years back with the Canadian collaboration, known as Rajasthan Atomic Power Station (RAPS), half the core requirement of fuel was met from the fuel manufactured for the first time in India. Since then the fuel production capabilities were enhanced by setting up an industrial scale fuel manufacturing facility - Nuclear Fuel Complex (NFC) at Hyderabad, India during early '70s. NFC has been continuously expanding its capacities to meet the fuel demand of all the PHWRs constructed and operated by Nuclear Power Corporation of India Limited (NPCIL). Presently, fifteen PHWR 220 MWe units and two PHWR 540 MWe units are in operation and one more PHWR 220 MWe unit is in advanced stage of commissioning in India. While continuously engaged in the manufacture of fuel for these reactors, NFC has been upgrading the production lines with new processes and quality assurance systems. In order to multiply the production capacities, NFC has embarked on developing indigenous capability for design and building of special purpose process equipment for Uranium dioxide powder production, pelletisation and final assembly operations. Some of the equipment having state-of-the-art features includes dryers/furnaces for UO{sub 2} powder, presses/ sintering furnaces for pelletisation and resistance welding equipment/ machining stations for assembly operations. In addition, several campaigns were taken over the years for manufacturing PHWR fuel bundles containing reprocessed Uranium, Thoria and slightly enriched Uranium. The paper

Consolidating indigenous capability for PHWR fuel manufacturing in India

International Nuclear Information System (INIS)

Jayaraj, R.N.

2010-01-01

Since inception of Nuclear Power Programme in India greater emphasis was laid on total self- reliance in Fuel manufacturing. For Pressurized Heavy Water Reactors (PHWRs), which forms a base for the first stage of the programme, an integrated approach was adopted encompassing different areas of expertise -Design, Construction and Operation of PHWRs; Heavy Water production and Fuel Design and Manufacturing technologies. For the first PHWR constructed about 35 years back with the Canadian collaboration, known as Rajasthan Atomic Power Station (RAPS), half the core requirement of fuel was met from the fuel manufactured for the first time in India. Since then the fuel production capabilities were enhanced by setting up an industrial scale fuel manufacturing facility - Nuclear Fuel Complex (NFC) at Hyderabad, India during early '70s. NFC has been continuously expanding its capacities to meet the fuel demand of all the PHWRs constructed and operated by Nuclear Power Corporation of India Limited (NPCIL). Presently, fifteen PHWR 220 MWe units and two PHWR 540 MWe units are in operation and one more PHWR 220 MWe unit is in advanced stage of commissioning in India. While continuously engaged in the manufacture of fuel for these reactors, NFC has been upgrading the production lines with new processes and quality assurance systems. In order to multiply the production capacities, NFC has embarked on developing indigenous capability for design and building of special purpose process equipment for Uranium dioxide powder production, pelletisation and final assembly operations. Some of the equipment having state-of-the-art features includes dryers/furnaces for UO 2 powder, presses/ sintering furnaces for pelletisation and resistance welding equipment/ machining stations for assembly operations. In addition, several campaigns were taken over the years for manufacturing PHWR fuel bundles containing reprocessed Uranium, Thoria and slightly enriched Uranium. The paper summarises

Capability ethics

NARCIS (Netherlands)

I.A.M. Robeyns (Ingrid)

2012-01-01

textabstractThe capability approach is one of the most recent additions to the landscape of normative theories in ethics and political philosophy. Yet in its present stage of development, the capability approach is not a full-blown normative theory, in contrast to utilitarianism, deontological

Managing Knowledge-Based Resource Capabilities Under Uncertainty

OpenAIRE

Janice E. Carrillo; Cheryl Gaimon

2004-01-01

A firm's ability to manage its knowledge-based resource capabilities has become increasingly important as a result of performance threats triggered by technology change and intense competition. At the manufacturing plant level, we focus on three repositories of knowledge that drive performance. First, the physical production or information systems represent knowledge embedded in the plant's technical systems. Second, the plant's workforce has knowledge, including diverse scientific informatio...

Non-Noether Conserved Quantity for Relativistic Nonholonomic System with Variable Mass

International Nuclear Information System (INIS)

Qiao Yongfen; Li Renjie; Ma Yongsheng

2005-01-01

Using form invariance under special infinitesimal transformations in which time is not variable, the non-Noether conserved quantity of the relativistic nonholonomic system with variable mass is studied. The differential equations of motion of the system are established. The definition and criterion of the form invariance of the system under infinitesimal transformations are studied. The necessary and sufficient condition under which the form invariance is a Lie symmetry is given. The condition under which the form invariance can be led to a non-Noether conserved quantity and the form of the conserved quantity are obtained. Finally, an example is given to illustrate the application of the result.

Dynamic Capabilities

DEFF Research Database (Denmark)

Grünbaum, Niels Nolsøe; Stenger, Marianne

2013-01-01

The findings reveal a positive relationship between dynamic capabilities and innovation performance in the case enterprises, as we would expect. It was, however, not possible to establish a positive relationship between innovation performance and profitability. Nor was there any positive...... relationship between dynamic capabilities and profitability....

Exercise quantity-dependent muscle hypertrophy in adult zebrafish (Danio rerio).

Science.gov (United States)

Hasumura, Takahiro; Meguro, Shinichi

2016-07-01

Exercise is very important for maintaining and increasing skeletal muscle mass, and is particularly important to prevent and care for sarcopenia and muscle disuse atrophy. However, the dose-response relationship between exercise quantity, duration/day, and overall duration and muscle mass is poorly understood. Therefore, we investigated the effect of exercise duration on skeletal muscle to reveal the relationship between exercise quantity and muscle hypertrophy in zebrafish forced to exercise. Adult male zebrafish were exercised 6 h/day for 4 weeks, 6 h/day for 2 weeks, or 3 h/day for 2 weeks. Flow velocity was adjusted to maximum velocity during continual swimming (initial 43 cm/s). High-speed consecutive photographs revealed that zebrafish mainly drove the caudal part. Additionally, X-ray micro computed tomography measurements indicated muscle hypertrophy of the mid-caudal half compared with the mid-cranial half part. The cross-sectional analysis of the mid-caudal half muscle revealed that skeletal muscle (red, white, or total) mass increased with increasing exercise quantity, whereas that of white muscle and total muscle increased only under the maximum exercise load condition of 6 h/day for 4 weeks. Additionally, the muscle fiver size distributions of exercised fish were larger than those from non-exercised fish. We revealed that exercise quantity, duration/day, and overall duration were correlated with skeletal muscle hypertrophy. The forced exercise model enabled us to investigate the relationship between exercise quantity and skeletal muscle mass. These results open up the possibility for further investigations on the effects of exercise on skeletal muscle in adult zebrafish.

Capabilities and Incapabilities of the Capabilities Approach to Health Justice.

Science.gov (United States)

Selgelid, Michael J

2016-01-01

This first part of this article critiques Sridhar Venkatapuram's conception of health as a capability. It argues that Venkatapuram relies on the problematic concept of dignity, implies that those who are unhealthy lack lives worthy of dignity (which seems politically incorrect), sets a low bar for health, appeals to metaphysically problematic thresholds, fails to draw clear connections between appealed-to capabilities and health, and downplays the importance/relevance of health functioning. It concludes by questioning whether justice entitlements should pertain to the capability for health versus health achievements, challenging Venkatapuram's claims about the strength of health entitlements, and demonstrating that the capabilities approach is unnecessary to address social determinants of health. © 2016 John Wiley & Sons Ltd.

BIRTHDAY CAKE ACTIVITY STRUCTURED ARRANGEMENT FOR HELPING CHILDREN DETERMINING QUANTITIES

Directory of Open Access Journals (Sweden)

Neni Mariana

2010-07-01

Full Text Available Few researches have been concerned about relation between children’s spatialthinking and number sense. Narrowing for this small research, we focused onone component of spatial thinking, that is structuring objects, and onecomponent of number senses, that is cardinality by determining quantities. Thisstudy focused on a design research that was conducted in Indonesia in which weinvestigated pre-school children’s (between 2 and 3.5 years old ability inmaking structured arrangement and their ability to determine the quantities bylooking at the arrangements. The result shows us that some of the children wereable to make such arrangement. However, the children found difficulties eitherto determine quantities from those arrangements or to compare some structuresto easily recognize number of objects.Keywords: structures, structured arrangement, cardinality DOI: http://dx.doi.org/10.22342/jme.1.1.790.53-70

Reduction of trace quantities of chromium(VI by strong acids

Directory of Open Access Journals (Sweden)

Pezzin Sérgio H

2004-01-01

Full Text Available The chemical behavior of Cr(VI at low concentrations (10-4 to 10-7 mol L-1 in several strong acids was studied using high specific activity 51Cr(VI as a tracer. The speciation of the products from these systems was carried out by ion exchange chromatography with stepwise elution. The results show that trace quantities of Cr(VI, monitored by means of radiochromium (51Cr, are reduced in the presence of mineral acids such as perchloric, hydrochloric, hydrofluoric, sulfuric, nitric and trifluoromethanesulfonic acids, even in the absence of conventional reducing agents, producing different measureable Cr(III species, depending on the acid anion. Detailed studies of the reduction of low concentrations of Cr(VI with nitric acid have shown that the relative rate of reduction increases as the concentration of the acid increases or as the concentration of the Cr(VI decreases.

Parents face quantity-quality trade-offs between reproduction and investment in offspring in Iceland.

Science.gov (United States)

Lynch, Robert Francis

2016-05-01

How to optimally allocate time, energy and investment in an effort to maximize one's reproductive success is a fundamental problem faced by all organisms. This effort is complicated when the production of each additional offspring dilutes the total resources available for parental investment. Although a quantity-quality trade-off between producing and investing in offspring has long been assumed in evolutionary biology, testing it directly in humans is difficult, partly owing to the long generation time of our species. Using data from an Icelandic genealogy (Íslendingabók) over two centuries, I address this issue and analyse the quantity-quality trade-off in humans. I demonstrate that the primary impact of parents on the fitness of their children is the result of resources and or investment, but not genes. This effect changes significantly across time, in response to environmental conditions. Overall, increasing reproduction has negative fitness consequences on offspring, such that each additional sibling reduces an individual's average lifespan and lifetime reproductive success. This analysis provides insights into the evolutionary conflict between producing and investing in children while also shedding light on some of the causes of the demographic transition.

Developing a Current Capability Design for Manufacture Framework in the Aerospace Industry

OpenAIRE

Whiteside, A.; Shehab, Essam; Beadle, C.; Percival, M.

2009-01-01

Organised by: Cranfield University During progressive product design and development in the aerospace industry, a lack of effective communication between the sequential functions of design, manufacturing and assembly often causes delays and setbacks whereby production capabilities are unable to realise design intent in high-complexity product models. As a result, there is a need to formalise the progressive release of an engineering model to production functions during New Prod...

An analysis of vendor innovation capability in the contract electronics manufacturing industry

DEFF Research Database (Denmark)

Perunovic, Zoran; Mefford, Robert; Christoffersen, Mads

2016-01-01

the contract, vendors can use different configurations of the competitive priorities of cost, quality, delivery and flexibility. The research aggregates the capabilities that influence the innovative capability of a vendor into the innovation-related capabilities (IRCs) of design, new product introduction......Limited academic research has been given to analysing the innovation capabilities of vendors in outsourcing contracts. This paper seeks to address this gap in the literature by enhancing our understanding of how the innovation capability of vendors is deployed to win, run and renew outsourcing...... contracts with their customers. Employing the resource-based view as a theoretical basis and undertaking in-depth case study analysis of three vendors in the electronic manufacturing services industry, the research shows that to achieve the outsourcing objectives of winning, running and renewing...

A framework study on assessment of mass customization capabilities

DEFF Research Database (Denmark)

Nielsen, Kjeld; Brunø, Thomas Ditlev; Jørgensen, Kaj Asbjørn

2012-01-01

Much research has been done to assist industries to move from mass production to mass customization. Salvador F., et al. made it clear in the article “Cracking the code of Mass Customization”, that becoming a Mass Customizer is not a single step quick fix, but requires 3 fundamental capabilities....... In that article it is proposed that these three capabilities are evaluated in a continuum model as an illustration of a company’s status of mass customization. This paper will introduce the neccesarity for a framework for measuring a company’s performance as a mass customizer....

Complexity in an Unexpected Place: Quantities in Selected Acquisition Reports

Science.gov (United States)

2017-12-01

by the Army Acquisition Executive contains the following language . As a recently delegated Acquisition Category IC program, the AH-64E Apache...Complexity in an Unexpected Place: Quantities in Selected Acquisition Reports Gregory A. Davis, Project Leader Margaret L. Giles David M. Tate I...F E N S E A N A L Y S E S IDA Paper P-8490 Complexity in an Unexpected Place: Quantities in Selected Acquisition Reports Gregory A. Davis

Biosurfactant production by Pseudomonas aeruginosain kefir and fish meal.

Science.gov (United States)

Kaskatepe, Banu; Yildiz, Sulhiye; Gumustas, Mehmet; Ozkan, Sibel A

2015-01-01

The aim of this study was to increase rhamnolipid production by formulating media using kefir and fish meal for Pseudomonas aeruginosa strains isolated from different environmental resources. The strains, named as H1, SY1, and ST1, capable of rhamnolipid production were isolated from soil contaminated with wastes originating from olive and fish oil factories. Additionally, P. aeruginosa ATCC 9027 strain, which is known as rhamnolipid producer, was included in the study. Initially, rhamnolipid production by the strains was determined in Mineral Salt Medium (MSM) and then in media prepared by using kefir and fish meal. The obtained rhamnolipids were purified and quantified according to Dubois et al. (1956). The quantity of rhamnolipids of ATCC, H1 and SY1 strains in kefir media were determined as 11.7 g/L, 10.8 g/L and 3.2 g/L, respectively, and in fish meal media as 12.3 g/L, 9.3 g/L and 10.3 g/L, respectively. In addition, effect of UV light exposure on rhamnolipid production was also investigated but contrary a decrease was observed. The results indicate that P. aeruginosa strains isolated from various environmental resources used in this study can be important due to their rhamnolipid yield, and fish meal, which is obtained from waste of fish, can be an alternative source in low cost rhamnolipid production.

Biosurfactant production by Pseudomonas aeruginosain kefir and fish meal

Directory of Open Access Journals (Sweden)

Banu Kaskatepe

2015-09-01

Full Text Available The aim of this study was to increase rhamnolipid production by formulating media using kefir and fish meal for Pseudomonas aeruginosa strains isolated from different environmental resources. The strains, named as H1, SY1, and ST1, capable of rhamnolipid production were isolated from soil contaminated with wastes originating from olive and fish oil factories. Additionally, P. aeruginosa ATCC 9027 strain, which is known as rhamnolipid producer, was included in the study. Initially, rhamnolipid production by the strains was determined in Mineral Salt Medium (MSM and then in media prepared by using kefir and fish meal. The obtained rhamnolipids were purified and quantified according to Dubois et al. (1956. The quantity of rhamnolipids of ATCC, H1 and SY1 strains in kefir media were determined as 11.7 g/L, 10.8 g/L and 3.2 g/L, respectively, and in fish meal media as 12.3 g/L, 9.3 g/L and 10.3 g/L, respectively. In addition, effect of UV light exposure on rhamnolipid production was also investigated but contrary a decrease was observed. The results indicate that P. aeruginosa strains isolated from various environmental resources used in this study can be important due to their rhamnolipid yield, and fish meal, which is obtained from waste of fish, can be an alternative source in low cost rhamnolipid production.

Capabilities for Strategic Adaptation

DEFF Research Database (Denmark)

Distel, Andreas Philipp

This dissertation explores capabilities that enable firms to strategically adapt to environmental changes and preserve competitiveness over time – often referred to as dynamic capabilities. While dynamic capabilities being a popular research domain, too little is known about what these capabiliti...

Symmetries and conserved quantities in geodesic motion

International Nuclear Information System (INIS)

Hojman, S.; Nunez, L.; Patino, A.; Rago, H.

1986-01-01

Recently obtained results linking several constants of motion to one (non-Noetherian) symmetry to the problem of geodesic motion in Riemannian space-times are applied. The construction of conserved quantities in geodesic motion as well as the deduction of geometrical statements about Riemannian space-times are achieved

Marketing management capabilities of SMEs: an empirical analysis in the EU

OpenAIRE

Banterle, Alessandro; Carraresi, Laura; Stranieri, Stefanella

2008-01-01

SMEs, that represent the greater part of European food firms producing traditional food products (TFPs), meet difficulties in adapting their strategies to market changes, and in competing with big enterprises. Marketing management capabilities play a key role in good SMEs performance in the market. The purpose of this paper is to evaluate the marketing capabilities of SMEs that produce TFPs. The theoretical framework considers the Market Orientation approach and marketing management capabilit...

Progress on FP13 Total Cross Section Measurements Capability

Energy Technology Data Exchange (ETDEWEB)

Ullmann, John Leonard [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Couture, Aaron Joseph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Koehler, Paul E. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mocko, Michal [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mosby, Shea Morgan [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Wender, Stephen Arthur [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-09-26

An accurate knowledge of the neutron capture cross section is important for many applications. Experimental measurements are important since theoretical calculations of capture have been notoriously difficult, with the ratio of measured to calculated cross sections often a factor of 2 or more in the 10 keV to 1 MeV region. However, a direct measurement of capture cannot be made on many interesting radioactive nuclides because of their short half-life or backgrounds caused by their nuclear decay. On the other hand, neutron transmission measurements of the total cross section are feasible for a wide range of radioactive nuclides since the detectors are far from the sample, and often are less sensitive to decay radiation. The parameters extracted from a total cross section measurement, which include the average resonance spacing, the neutron strength function, and the average total radiation width, (Γ_γ), provide tight constraints on the calculation of the capture cross section, and when applied produce much more accurate results. These measurements can be made using the intense epithermal neutron flux at the Lujan Center on relatively small quantities of target material. It was the purpose of this project to investigate and develop the capability to make these measurements. A great deal of progress was made towards establishing this capability during 2016, including setting up the flight path and obtaining preliminary results, but more work remains to be done.

ADM pseudotensors, conserved quantities and covariant conservation laws in general relativity

International Nuclear Information System (INIS)

Fatibene, L.; Ferraris, M.; Francaviglia, M.; Lusanna, L.

2012-01-01

The ADM formalism is reviewed and techniques for decomposing generic components of metric, connection and curvature are obtained. These techniques will turn out to be enough to decompose not only Einstein equations but also covariant conservation laws. Then a number of independent sets of hypotheses that are sufficient (though not necessary) to obtain standard ADM quantities (and Hamiltonian) from covariant conservation laws are considered. This determines explicitly the range in which standard techniques are equivalent to covariant conserved quantities. The Schwarzschild metric in different coordinates is then considered, showing how the standard ADM quantities fail dramatically in non-Cartesian coordinates or even worse when asymptotically flatness is not manifest; while, in view of their covariance, covariant conservation laws give the correct result in all cases. - Highlights: ► In the paper ADM conserved quantities for GR are obtained from augmented conservation laws. ► Boundary conditions for this to be possible are considered and compared with the literature. ► Some different forms of Schwarzschild solutions are considered as simple examples of different boundary conditions.

Studies on quantity and composition of dairy cow excreta

International Nuclear Information System (INIS)

Peschke, H.

1982-01-01

After feeding a lactating dairy cow a day ration completely enriched with 15 N, the quantities of feces and urine were registered over a period of ten days and put into proportion to the animal mass. The fecal dry matter was put into proportion to the dry matter of the fodder by means of 15 N analysis the N excretion with the excreta was determined concerning quantity and time. Selected feces and urine charges were used to produce a slurry model. The content of nutritive elements of the initial components and of the organic fertilizer are discussed. (author)

Validity of the concept of absorbed dose as a physical quantity

International Nuclear Information System (INIS)

Tada, Jun-Ichiro; Katoh, Kazuaki.

1995-01-01

The concept of the 'absorbed dose' of ionizing radiation is scrutinized from physical point of view. It is shown that the concept and definition of the quantity in the ICRU system is disqualified as a physical quantity and the absorbed dose can not always be a 'measure of cause' in describing causality relation between radiation and effects on matter. The current absorbed dose depends even on the energy that have already been brought out from the matter, contrary to the intention of introducing the quantity. Trials to remove these difficulties are made. However, it is also shown there still exists an essential problem that cannot be solved by improving the formulation. (author)

Incentive Policy Options for Product Remanufacturing: Subsidizing Donations or Resales?

Science.gov (United States)

Zhu, Xiaodong; Wang, Yue; Li, Bangyi

2017-01-01

Remanufactured products offer better environmental benefits, and governments encourage manufacturers to remanufacture through various subsidy policies. This practice has shown that, in addition to product sales, remanufactured product can also achieve its value through social donation. Based on the remanufactured product value realization approaches, governments provide two kinds of incentive policies, which are remanufactured product sales subsidies and remanufactured product donation subsidies. This paper constructs a two-stage Stackelberg game model including a government and a manufacturer under two different policies, which can be solved by backward induction. By comparing the optimal decision of the two policies, our results show that, compared with the remanufacturing sales subsidy, donation subsidy weakens the cannibalization of remanufactured products for new products and increases the quantity of new products. It reduces the sales quantity of remanufactured products, but increases their total quantity. Under certain conditions of low subsidy, the manufacturer adopting sales subsidy provides better economic and environmental benefits. Under certain conditions of high subsidy, the manufacturer adopting donation subsidy offers better economic and environmental benefits. When untreated product environmental impact is large enough, donation subsidy policy has a better social welfare. Otherwise, the choice of social welfare of these two different policies depends on the social impact of remanufactured product donated. PMID:29194411

Incentive Policy Options for Product Remanufacturing: Subsidizing Donations or Resales?

Science.gov (United States)

Zhu, Xiaodong; Wang, Zhe; Wang, Yue; Li, Bangyi

2017-12-01

Remanufactured products offer better environmental benefits, and governments encourage manufacturers to remanufacture through various subsidy policies. This practice has shown that, in addition to product sales, remanufactured product can also achieve its value through social donation. Based on the remanufactured product value realization approaches, governments provide two kinds of incentive policies, which are remanufactured product sales subsidies and remanufactured product donation subsidies. This paper constructs a two-stage Stackelberg game model including a government and a manufacturer under two different policies, which can be solved by backward induction. By comparing the optimal decision of the two policies, our results show that, compared with the remanufacturing sales subsidy, donation subsidy weakens the cannibalization of remanufactured products for new products and increases the quantity of new products. It reduces the sales quantity of remanufactured products, but increases their total quantity. Under certain conditions of low subsidy, the manufacturer adopting sales subsidy provides better economic and environmental benefits. Under certain conditions of high subsidy, the manufacturer adopting donation subsidy offers better economic and environmental benefits. When untreated product environmental impact is large enough, donation subsidy policy has a better social welfare. Otherwise, the choice of social welfare of these two different policies depends on the social impact of remanufactured product donated.

Successful Completion of FY18/Q1 ASC L2 Milestone 6355: Electrical Analysis Calibration Workflow Capability Demonstration.

Energy Technology Data Exchange (ETDEWEB)

Copps, Kevin D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-12-01

The Sandia Analysis Workbench (SAW) project has developed and deployed a production capability for SIERRA computational mechanics analysis workflows. However, the electrical analysis workflow capability requirements have only been demonstrated in early prototype states, with no real capability deployed for analysts’ use. This milestone aims to improve the electrical analysis workflow capability (via SAW and related tools) and deploy it for ongoing use. We propose to focus on a QASPR electrical analysis calibration workflow use case. We will include a number of new capabilities (versus today’s SAW), such as: 1) support for the XYCE code workflow component, 2) data management coupled to electrical workflow, 3) human-in-theloop workflow capability, and 4) electrical analysis workflow capability deployed on the restricted (and possibly classified) network at Sandia. While far from the complete set of capabilities required for electrical analysis workflow over the long term, this is a substantial first step toward full production support for the electrical analysts.

An environmental fairness based optimisation model for the decision-support of joint control over the water quantity and quality of a river basin

Science.gov (United States)

Yu, Sen; He, Li; Lu, Hongwei

2016-04-01

This paper presented a new environmental fairness based optimisation model (EFOM) for the decision-support of water resources management and water pollution control at the watershed scale. The model integrated three prediction modules for water consumption and pollutant discharge (WCPD), environmental Gini coefficient (EGC) and water quality (WASP). The model is capable of optimizing the total discharge quantity in the whole basin and controlling units both spatially and temporally, and addressing the conflicts between environmental fairness and efficiency. The model was applied to the Songhua River basin, attempting to support decision-making of joint control over the water quantity and quality. Validation of the WASP module showed that the simulation agreed well with water quality monitoring values (2013) in the Harbin section. Results from the EFOM model also indicated that the water environment in the Harbin section would be improved significantly by effectively controlling the total pollution discharge. The identified optimal strategy obtained from the EFOM showed that the percentage of water in good quality reaches 72% in 2020, suggesting that the strategy would guarantee the planning goals of The China Action Plan for Water Pollution Control to be satisfied. Hence, the modelling under the consideration of environmental fairness can be a new attempt, which is beneficial to optimal joint control of water quantity and water quality at the watershed scale.

16 CFR 500.7 - Net quantity of contents, method of expression.

Science.gov (United States)

2010-01-01

... expression. The net quantity of contents shall be expressed in terms of weight or mass, measure, numerical... consumers. The net quantity of contents statement shall be in terms of fluid measure if the commodity is liquid, or in terms of weight or mass if the commodity is solid, semi-solid, or viscous, or a mixture of...

A small quantity of sodium arsenite will kill large cull hardwoods

Science.gov (United States)

Francis M. Rushmore

1956-01-01

Although it is well known that sodium arsenite is an effective silvicide, forestry literature contains little information about the minimum quantities of this chemical that are required to kill large cull trees. Such information would be of value because if small quantities of a chemical will produce satisfactory results, small holes or frills in the tree will hold it...

Tolerance analysis in manufacturing using process capability ratio with measurement uncertainty

DEFF Research Database (Denmark)

Mahshid, Rasoul; Mansourvar, Zahra; Hansen, Hans Nørgaard

2017-01-01

. In this paper, a new statistical analysis was applied to manufactured products to assess achieved tolerances when the process is known while using capability ratio and expanded uncertainty. The analysis has benefits for process planning, determining actual precision limits, process optimization, troubleshoot......Tolerance analysis provides valuable information regarding performance of manufacturing process. It allows determining the maximum possible variation of a quality feature in production. Previous researches have focused on application of tolerance analysis to the design of mechanical assemblies...... malfunctioning existing part. The capability measure is based on a number of measurements performed on part’s quality variable. Since the ratio relies on measurements, elimination of any possible error has notable negative impact on results. Therefore, measurement uncertainty was used in combination with process...

Uncertainty analysis of thermal quantities measurement in a centrifugal compressor

Science.gov (United States)

Hurda, Lukáš; Matas, Richard

2017-09-01

Compressor performance characteristics evaluation process based on the measurement of pressure, temperature and other quantities is examined to find uncertainties for directly measured and derived quantities. CFD is used as a tool to quantify the influences of different sources of uncertainty of measurements for single- and multi-thermocouple total temperature probes. The heat conduction through the body of the thermocouple probe and the heat-up of the air in the intake piping are the main phenomena of interest.

Understanding premixed flame chemistry of gasoline fuels by comparing quantities of interest

KAUST Repository

Selim, Hatem

2016-07-23

Gasoline fuels are complex mixtures that vary in composition depending on crude oil feedstocks and refining processes. Gasoline combustion in high-speed spark ignition engines is governed by flame propagation, so understanding fuel composition effects on premixed flame chemistry is important. In this study, the combustion chemistry of low-pressure, burner-stabilized, premixed flames of two gasoline fuels was investigated under stoichiometric conditions. Flame speciation was conducted using vacuum-ultraviolet synchrotron photoionization time-of-flight molecular beam mass spectroscopy. Stable end-products, intermediate hydrocarbons, and free radicals were detected and quantified. In addition, several isomeric species in the reaction pool were distinguished and quantified with the help of the highly tunable synchrotron radiation. A comparison between the products of both flames is presented and the major differences are highlighted. Premixed flame numerical simulations were conducted using surrogate fuel kinetic models for each flame. Furthermore, a new approach was developed to elucidate the main discrepancies between experimental measurements and the numerical predictions by comparing quantities of interest. © 2016.

Accounting for co-products in energy use, greenhouse gas emission savings and land use of biodiesel production from vegetable oils

NARCIS (Netherlands)

Corré, W.J.; Conijn, J.G.; Meesters, K.P.H.; Bos, H.L.

2016-01-01

Accounting for co-products of vegetable oil production is essential in reviewing the sustainability of biodiesel production, especially since oil crops produce valuable protein-rich co-products in different quantities and qualities. Two accounting methods, allocation on the basis of energy

Measuring nanocurie quantities of tritium bred in metallic lithium and lithium oxide samples

International Nuclear Information System (INIS)

Bertone, P.C.

1985-01-01

The LBM program requires that nanocurie quantities of tritium, bred in both lithium oxide pellets and lithium samples, be measured with an uncertainty not exceeding + or - 6%. Two methods of accurately measuring nanocurie quantities of tritium bred in LBM lithium oxide pellets and one method of accurately measuring nanocurie quantities of tritium bred in lithium samples are described. Potential errors associated with these tritium measurement techniques are also discussed

Use and declaration of additives in meat products: New legal regulations

Directory of Open Access Journals (Sweden)

Vuković Ilija

2005-01-01

Full Text Available The paper presents the more important additives used in meat products, their functional characteristics, the permitted quantities and declaration in keeping with the new legal regulations. Additives important for meat products, according to their functional characteristics, can be preservatives, antioxidants, stabilizers, emulsifiers, emulsifying salts, acidity regulators, sequestrants, thickeners, gelling agents, modified starches, acids, colours, aroma enhancers, packaging gases and coating powders, and it must be pointed out that many additives have several functional characteristics at the same time. In stating additives in the list of contents of a product, the elementary functional characteristic of the additive is given with the E number or name of the additive in brackets; modified starches are declared as „starch" without giving the E number. The declaration does not state the quantity of the additive added to the product, or the biggest permitted quantity of the additive in the given product.

Renewable electrification and local capability formation: Linkages and interactive learning

DEFF Research Database (Denmark)

Lema, Rasmus; Hanlin, Rebecca; Hansen, Ulrich Elmer

2018-01-01

This paper discusses the prospects for developing production and innovation capabilities arising from renewable electrification efforts. This discussion falls at the intersection of several literatures within innovation studies and development studies. It requires a combination of ideas from acro...

A multi-objective model for closed-loop supply chain optimization and efficient supplier selection in a competitive environment considering quantity discount policy

Science.gov (United States)

Jahangoshai Rezaee, Mustafa; Yousefi, Samuel; Hayati, Jamileh

2017-06-01

Supplier selection and allocation of optimal order quantity are two of the most important processes in closed-loop supply chain (CLSC) and reverse logistic (RL). So that providing high quality raw material is considered as a basic requirement for a manufacturer to produce popular products, as well as achieve more market shares. On the other hand, considering the existence of competitive environment, suppliers have to offer customers incentives like discounts and enhance the quality of their products in a competition with other manufacturers. Therefore, in this study, a model is presented for CLSC optimization, efficient supplier selection, as well as orders allocation considering quantity discount policy. It is modeled using multi-objective programming based on the integrated simultaneous data envelopment analysis-Nash bargaining game. In this study, maximizing profit and efficiency and minimizing defective and functions of delivery delay rate are taken into accounts. Beside supplier selection, the suggested model selects refurbishing sites, as well as determining the number of products and parts in each network's sector. The suggested model's solution is carried out using global criteria method. Furthermore, based on related studies, a numerical example is examined to validate it.

Price effects of changing quantities supplied at the integrated european fish market

DEFF Research Database (Denmark)

Nielsen, Max; Smit, Jos; Guillen, Jordi

2012-01-01

to be −1.1. This implies that price flexibilities previously estimated for single European countries underestimate price changes at the European level caused by quantity changes. Results indicate that changing quantities can increase revenues from individual species with large own-price flexibilities...

[Dynamics of change of ureaplasma laboratory strain titers and quantity of their DNA in transport medium at varying temperature].

Science.gov (United States)

Gamova, N A; Ivanova, T A

2013-01-01

Study of preservation dynamics of ureaplasma laboratory strain live cultures and their DNA in transport medium at varying temperature. The study was carried out in laboratory strains Ureaplasma urealyticum serotype 8 and Ureaplasma parvum serotype 1. The quantity of live ureaplasmas was determined by method of tenfold dilutions in liquid medium. The growth of ureaplasmas was registered by changes in the color of the cultivation medium due to its alkalization by metabolism products and expressed in CCU/ml. DNA quantity in samples was determined by real time PCR performed by using Florocenosis-micoplasmas-FL test system produced by ILS. Live ureaplasmas wer shown to be preserved in transport medium at 4 degrees C for 12 - 29 days, at 18 - 22 degrees C--for 9 - 20 days and at 37 degrees C--for only 2 days. In samples incubated at 37 degrees C the quantity of live ureaplasmas increased and then sharply decreased to 0, at lower temperature titers of the cells decreased smoothly. The quantity of ureaplasma DNA in the process of their incubation did not change significantly. Fundamental differences in the duration of survival of U. urealyticum strain and U. parvum strain in transport medium at varying temperature were not detected. Based on the studies performed a practical conclusion can be drawn that in cases of emergency when clinical material transportation is necessary its storage in transport medium for several days is acceptable.

Thermodynamic quantities for the Klein–Gordon equation

Indian Academy of Sciences (India)

We study some thermodynamic quantities for the Klein–Gordon equation with a linear plus inverselinear, scalar potential. We obtain the energy eigenvalues with the help of the quantization rule from the biconfluent Heun's equation.We use a method based on the Euler–MacLaurin formula to analytically compute thethermal ...

19 CFR 351.409 - Differences in quantities.

Science.gov (United States)

2010-04-01

... DUTIES Calculation of Export Price, Constructed Export Price, Fair Value, and Normal Value § 351.409... comparing export price or constructed export price with normal value, the Secretary will make a reasonable... section 773(a)(6)(C)(i) of the Act.) (b) Sales with quantity discounts in calculating normal value. The...

16 CFR 1.23 - Quantity limit rules.

Science.gov (United States)

2010-01-01

... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Quantity limit rules. 1.23 Section 1.23 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION, PROCEDURES AND RULES OF PRACTICE GENERAL... Robinson-Patman Act. These rules have the force and effect of law. [32 FR 8444, June 13, 1967. Redesignated...

7 CFR 1427.170 - Quantity for loan.

Science.gov (United States)

2010-01-01

... to the preservation or safety of the loan collateral. Loans may be made on a lower percentage basis... 7 Agriculture 10 2010-01-01 2010-01-01 false Quantity for loan. 1427.170 Section 1427.170... OF AGRICULTURE LOANS, PURCHASES, AND OTHER OPERATIONS COTTON Recourse Seed Cotton Loans § 1427.170...

Urgency of increasing the quantity and quality of student creativity program

Science.gov (United States)

Sarmini; Prasetya, Ketut; Nadiroh, Ulin

2018-01-01

Student creativity is very important to improve the quality and quantity. The purpose of this paper is to identify the quality and quantity of the Student Creativity Program. The method in this research is exploratory study. The subjects taken are the leaders of deans and vice deans at the State University of Surabaya. Data collection techniques used are kusioner. The result of this research is creativity program in student is very important. Not only improve the quality and quantity of creativity, but also affect the image of the institution. It is necessary to have written rules on the regulations on the Student Creativity Program and to take a comprehensive and comprehensive approach, and to organize the budget is the main thing.

Uncertainties of exposure-related quantities in mammographic x-ray unit quality control

International Nuclear Information System (INIS)

Gregory, Kent J.; Pattison, John E.; Bibbo, Giovanni

2006-01-01

Breast screening programs operate in many countries with mammographic x-ray units subject to stringent quality control tests. These tests include the evaluation of quantities based on exposure measurements, such as half value layer, automatic exposure control reproducibility, average glandular dose, and radiation output rate. There are numerous error sources that contribute to the uncertainty of these exposure-related quantities, some of which are unique to the low energy x-ray spectrum produced by mammographic x-ray units. For each of these exposure-related quantities, the applicable error sources and their magnitudes vary, depending on the test equipment used to make the measurement, and whether or not relevant corrections have been applied. This study has identified and quantified a range of error sources that may be used to estimate the combined uncertainty of these exposure-related quantities, given the test equipment used and corrections applied. The uncertainty analysis uses methods described by the International Standards Organization's Guide to the Expression of Uncertainty in Measurement. Examples of how these error sources combine to give the uncertainty of the exposure-related quantities are presented. Using the best test equipment evaluated in this study, uncertainties of the four exposure-related quantities at the 95% confidence interval were found to be ±1.6% (half value layer), ±0.0008 (automatic exposure control reproducibility), ±2.3% (average glandular dose), and ±2.1% (radiation output rate). In some cases, using less precise test equipment or failing to apply corrections, resulted in uncertainties more than double in magnitude

Multidemand Multisource Order Quantity Allocation with Multiple Transportation Alternatives

Directory of Open Access Journals (Sweden)

Jun Gang

2015-01-01

Full Text Available This paper focuses on a multidemand multisource order quantity allocation problem with multiple transportation alternatives. To solve this problem, a bilevel multiobjective programming model under a mixed uncertain environment is proposed. Two levels of decision makers are considered in the model. On the upper level, the purchaser aims to allocate order quantity to multiple suppliers for each demand node with the consideration of three objectives: total purchase cost minimization, total delay risk minimization, and total defect risk minimization. On the lower level, each supplier attempts to optimize the transportation alternatives with total transportation and penalty costs minimization as the objective. In contrast to prior studies, considering the information asymmetry in the bilevel decision, random and fuzzy random variables are used to model uncertain parameters of the construction company and the suppliers. To solve the bilevel model, a solution method based on Kuhn-Tucker conditions, sectional genetic algorithm, and fuzzy random simulation is proposed. Finally, the applicability of the proposed model and algorithm is evaluated through a practical case from a large scale construction project. The results show that the proposed model and algorithm are efficient in dealing with practical order quantity allocation problems.

Production Support Flight Control Computers: Research Capability for F/A-18 Aircraft at Dryden Flight Research Center

Science.gov (United States)

Carter, John F.

1997-01-01

NASA Dryden Flight Research Center (DFRC) is working with the United States Navy to complete ground testing and initiate flight testing of a modified set of F/A-18 flight control computers. The Production Support Flight Control Computers (PSFCC) can give any fleet F/A-18 airplane an in-flight, pilot-selectable research control law capability. NASA DFRC can efficiently flight test the PSFCC for the following four reasons: (1) Six F/A-18 chase aircraft are available which could be used with the PSFCC; (2) An F/A-18 processor-in-the-loop simulation exists for validation testing; (3) The expertise has been developed in programming the research processor in the PSFCC; and (4) A well-defined process has been established for clearing flight control research projects for flight. This report presents a functional description of the PSFCC. Descriptions of the NASA DFRC facilities, PSFCC verification and validation process, and planned PSFCC projects are also provided.

Export Margins, Price and Quantity of Belarus’s Export Growth

Directory of Open Access Journals (Sweden)

Otamurodov Shavkat

2017-03-01

Full Text Available This paper examines the sources of Belarus’s export growth and decomposes export growth into extensive and intensive margins. This study also aims to determine export margins for intermediate and final goods and to determine the price and quantity components of the intensive export margin. In order to achieve the desired objectives, we use two methods for decomposing export growth, the count method and the export shares method. We analyse Belarus's export growth using export data at the HS-6 digit level for the 2004-2014 period. Our results show that Belarus's exports grew mainly due to growth in the price margin during the studied period 2004-2014. However, the extensive margin was important in export growth to some extent. Comparing the growth rate across final and intermediate goods reveals that although the share of final products in Belarus’s exports is not very big (18.9% in 2014, the average annual growth in exports of final products is higher than that of intermediate goods. Our investigation also shows that Belarus produces a wide range of commodities, but the share of the most of these commodities is not large; its exports depend on a restricted range of commodities. Moreover, most of the commodities are exported to Russia and Ukraine. Our results give us reason to assume that finding new markets for their new products is one of the main challenges for developing countries wishing to increase their exports by an extensive margin. This has important implications for how policy makers promote the trade and diversification of exports.

Capability-based computer systems

CERN Document Server

Levy, Henry M

2014-01-01

Capability-Based Computer Systems focuses on computer programs and their capabilities. The text first elaborates capability- and object-based system concepts, including capability-based systems, object-based approach, and summary. The book then describes early descriptor architectures and explains the Burroughs B5000, Rice University Computer, and Basic Language Machine. The text also focuses on early capability architectures. Dennis and Van Horn's Supervisor; CAL-TSS System; MIT PDP-1 Timesharing System; and Chicago Magic Number Machine are discussed. The book then describes Plessey System 25

Security Process Capability Model Based on ISO/IEC 15504 Conformant Enterprise SPICE

Directory of Open Access Journals (Sweden)

Mitasiunas Antanas

2014-07-01

Full Text Available In the context of modern information systems, security has become one of the most critical quality attributes. The purpose of this paper is to address the problem of quality of information security. An approach to solve this problem is based on the main assumption that security is a process oriented activity. According to this approach, product quality can be achieved by means of process quality - process capability. Introduced in the paper, SPICE conformant information security process capability model is based on process capability modeling elaborated by world-wide software engineering community during the last 25 years, namely ISO/IEC 15504 that defines the capability dimension and the requirements for process definition and domain independent integrated model for enterprise-wide assessment and Enterprise SPICE improvement

Mobile Test Capabilities

Data.gov (United States)

Federal Laboratory Consortium — The Electrical Power Mobile Test capabilities are utilized to conduct electrical power quality testing on aircraft and helicopters. This capability allows that the...

Joint optimization of economic production quantity and preventive maintenance with considering multi-products and reserve time

Directory of Open Access Journals (Sweden)

Xuejuan Liu

2017-07-01

Originality/value: In modern companies, the production planning and maintenance schedule share the same system, and traditional research about two activities is separated, that always generate conflicts, such as inadequate or excessive maintenance, and shortages, etc., so we develop the integrated EPQ and PM model to avoid these undesirable effects.

Principles and foundation: national standards on quantities and units in nuclear science field

International Nuclear Information System (INIS)

Chen Lishu

1993-11-01

The main contents of National Standards on Quantities and units of atomic and nuclear physics (GB 3102.9) and Quantities and Units of nuclear reactions and ionizing radiations (GB 310.10) are presented in which most important quantities with their symbols and definitions in the nuclear scientific field are given. The principles and foundation, including the International System of Units (SI) and its application to the nuclear scientific field, in the setting of the National Standards are explained

FY 1984 report on the results of the verification test on the methanol conversion for oil-fired power plant. Survey of the potential quantity supplied of overseas resource (Survey of the potential quantity supplied of methanol); 1984 nendo sekiyu karyoku hatsudensho metanoru tenkan tou jissho shiken kaigai shigen kyokyu kano ryo chosa (Metanoru kyokyu kano ryo chosa) seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-03-01

Based on the results of the survey of the potential quantity supplied of overseas resource which was made from FY 1981 to FY 1983, the paper predicted the world methanol supply plan, changes in the oil situation, economical efficiency of methanol and the competitive power with petroleum products, etc., and studied the time of potential supply, areas of potential supply and supply potential of power generation use methanol during the period toward 2000. In case the comparatively low crude oil price is predicted due to the energy supply/demand (Scenario A), the supply potential of power generation use methanol in four projects on methanol production taken up as trial calculation example is considered very low. Even in case the comparatively high crude oil price is predicted (Scenario C), it is in 1989 that the methanol market price becomes equivalent in heat quantity to the crude oil price. It is difficult to expect the potential before 1989. In case of the intermediate case between Scenario A and Scenario C (Scenario B), it is in 1993 that the methanol price becomes equivalent in heat quantity to the crude oil price. It is difficult to expect the potential before 1993. (NEDO)

Capability to Recover Plutonium-238 in H-Canyon/HB-Line - 13248

Energy Technology Data Exchange (ETDEWEB)

Fuller, Kenneth S. Jr.; Smith, Robert H. Jr.; Goergen, Charles R. [Savannah River Nuclear Solutions, LLC, Savannah River Site, Aiken, SC 29802 (United States)

2013-07-01

Plutonium-238 is used in Radioisotope Thermoelectric Generators (RTGs) to generate electrical power and in Radioisotope Heater Units (RHUs) to produce heat for electronics and environmental control for deep space missions. The domestic supply of Pu-238 consists of scrap material from previous mission production or material purchased from Russia. Currently, the United States has no significant production scale operational capability to produce and separate new Pu-238 from irradiated neptunium-237 targets. The Department of Energy - Nuclear Energy is currently evaluating and developing plans to reconstitute the United States capability to produce Pu-238 from irradiated Np-237 targets. The Savannah River Site had previously produced and/or processed all the Pu-238 utilized in Radioisotope Thermoelectric Generators (RTGs) for deep space missions up to and including the majority of the plutonium for the Cassini Mission. The previous full production cycle capabilities included: Np- 237 target fabrication, target irradiation, target dissolution and Np-237 and Pu-238 separation and purification, conversion of Np-237 and Pu-238 to oxide, scrap recovery, and Pu-238 encapsulation. The capability and equipment still exist and could be revitalized or put back into service to recover and purify Pu-238/Np-237 or broken General Purpose Heat Source (GPHS) pellets utilizing existing process equipment in HB-Line Scrap Recovery, and H-Canyon Frame Waste Recovery processes. The conversion of Np-237 and Pu-238 to oxide can be performed in the existing HB-Line Phase-2 and Phase- 3 Processes. Dissolution of irradiated Np-237 target material, and separation and purification of Np-237 and Pu-238 product streams would be possible at production rates of ∼2 kg/month of Pu-238 if the existing H-Canyon Frames Process spare equipment were re-installed. Previously, the primary H-Canyon Frames equipment was removed to be replaced: however, the replacement project was stopped. The spare equipment

Improvement of neutronic calculations on a Masurca core using adaptive mesh refinement capabilities

International Nuclear Information System (INIS)

Fournier, D.; Archier, P.; Le Tellier, R.; Suteau, C.

2011-01-01

The simulation of 3D cores with homogenized assemblies in transport theory remains time and memory consuming for production calculations. With a multigroup discretization for the energy variable and a discrete ordinate method for the angle, a system of about 10"4 coupled hyperbolic transport equations has to be solved. For these equations, we intend to optimize the spatial discretization. In the framework of the SNATCH solver used in this study, the spatial problem is dealt with by using a structured hexahedral mesh and applying a Discontinuous Galerkin Finite Element Method (DGFEM). This paper shows the improvements due to the development of Adaptive Mesh Refinement (AMR) methods. As the SNATCH solver uses a hierarchical polynomial basis, p−refinement is possible but also h−refinement thanks to non conforming capabilities. Besides, as the flux spatial behavior is highly dependent on the energy, we propose to adapt differently the spatial discretization according to the energy group. To avoid dealing with too many meshes, some energy groups are joined and share the same mesh. The different energy-dependent AMR strategies are compared to each other but also with the classical approach of a conforming and highly refined spatial mesh. This comparison is carried out on different quantities such as the multiplication factor, the flux or the current. The gain in time and memory is shown for 2D and 3D benchmarks coming from the ZONA2B experimental core configuration of the MASURCA mock-up at CEA Cadarache. (author)

A South African perspective on livestock production in relation to ...

African Journals Online (AJOL)

quality protein sources for human consumption, ruminant production systems are targeted as they are perceived to produce large quantities of GHG. Livestock is also accused of using large quantities of water, an allegation that is based on ...

New product pricing

International Nuclear Information System (INIS)

Wilkinson, V.K.

1981-01-01

One of the most uncertain elements in budget planning is estimating production costs of items that have heretofore only been produced in prototype configurations and quantities. This paper examines the design and development of a mathematical model which computes appropriate prices for new and unique products. The resulting model offers a producer a fair return on his investment and the consumer a fair purchase price

Optical pumping production of spin polarized hydrogen

International Nuclear Information System (INIS)

Knize, R.J.; Happer, W.; Cecchi, J.L.

1984-01-01

There has been much interest recently in the production of large quantities of spin polarized hydrogen in various fields including controlled fusion, quantum fluids, high energy, and nuclear physics. One promising method for the development of large quantities of spin polarized hydrogen is the utilization of optical pumping with a laser. Optical pumping is a process where photon angular momentum is converted into electron and nuclear spin. The advent of tunable CW dye lasers (approx. 1 watt) allow the production of greater than 10 18 polarized atoms/sec. We have begun a program at Princeton to investigate the physics and technology of using optical pumping to produce large quantities of spin polarized hydrogen. Initial experiments have been done in small closed glass cells. Eventually, a flowing system, open target, or polarized ion source could be constructed

76 FR 58460 - Information Collection; Qualified Products List for Long-Term Retardant for Wildland Firefighting

Science.gov (United States)

2011-09-21

... adequate types and quantities of qualified fire chemical products available to accomplish fire management... made from these lists. To initiate an evaluation, product manufacturers (or authorized suppliers) enter... Substances and Their Threshold Planning Quantities''. A risk assessment, performed at manufacturer expense...

Dynamic capabilities for cooperation in Brazilian multinational and factors determining its management

Directory of Open Access Journals (Sweden)

Priscila Rezende da Costa

2015-05-01

Full Text Available In the context of emerging companies’ growth, current challenges depend on the local generation of product and process innovations, as well as dynamic capability to generate innovative solutions cooperatively and new globe business models. The objective of this study is to analyse the determining managerial factors for the dynamic capability of cooperation in Brazilian multinationals (BMNs. A survey was conducted with a sample of 60 BMNs, and a structured questionnaire and statistical tests with factorial analysis and Cronbach's alpha were used. The aggregate analysis of the results indicates that BMNs are going through a transitional process between the operational capability of cooperation and the capability for dynamic cooperation, which are relevant to the continuous adaptation of already-established cooperative management routines and the evaluation and incorporation of the relational capability of management practices that consider systemic flows, open innovation and integrate strategic intentionality into cooperative processes.

Agent Technology in Agile Multiparallel Manufacturing and Product Support

NARCIS (Netherlands)

van Moergestel, L.J.M.

2014-01-01

The thesis describes the application of agent technology in product manufacturing and product support. Important issues in the requirements of modern production are short time to market, requirement-driven production and low cost small quantity production. To meet these requirements special low cost

Air quality and composite wood products

Science.gov (United States)

Melissa G. D. Baumann

1999-01-01

Research at the USDA Forest Service, Forest Products Laboratory (FPL) is being conducted to identify the compounds emitted from wood products during their manufacture and subsequent use. The FPL researchers are measuring the types and quantities of VOCs that are emitted from particleboard and MDF products to provide quantitative emissions information. This information...

Conserved quantities for stationary Einstein-Maxwell space-times

International Nuclear Information System (INIS)

Esposito, F.P.; Witten, L.

1978-01-01

It is shown that every stationary Einstein-Maxwell space-time has eight divergence-free vector fields and these are isolated in general form. The vector fields and associated conserved quantities are calculated for several families of space-times. (Auth.)

Deburring: technical capabilities and cost-effective approaches, Lessons 3 and 4

Energy Technology Data Exchange (ETDEWEB)

Gillespie, L.K.

1980-06-01

This ten lesson text on deburring is designed to provide engineers and production supervisors with an overall understanding of deburring economics and current capabilities. The material included describes economics, side effects, process selection techniques, product design influences, standards, plantwide approaches, burr formation, and prevention. Deburring methods described include barrel, centrifugal barrel, vibratory, spindle, manual, electrochemical, electropolish, brush, abrasive jet, abrasive flow, water jet, thermal energy, and mechanized mechanical. Lessons 3 and 4 describe product design influences and burr prevention and minimization respectively.

Monitoring the eye lens: which dose quantity is adequate?

International Nuclear Information System (INIS)

Behrens, R; Dietze, G

2010-01-01

Recent epidemiological studies suggest a rather low dose threshold (below 0.5 Gy) for the induction of a cataract of the eye lens. Some other studies even assume that there is no threshold at all. Therefore, protection measures have to be optimized and current dose limits for the eye lens may be reduced in the future. The question of which personal dose equivalent quantity is appropriate for monitoring the dose to the eye lens arises from this situation. While in many countries dosemeters calibrated in terms of the dose equivalent quantity H p (0.07) have been seen as being adequate for monitoring the dose to the eye lens, this might be questionable in the case of reduced dose limits and, thus, it may become necessary to use the dose equivalent quantity H p (3) for this purpose. To discuss this question, the dose conversion coefficients for the equivalent dose of the eye lens (in the following eye lens dose) were determined for realistic photon and beta radiation fields and compared with the values of the corresponding conversion coefficients for the different operational quantities. The values obtained lead to the following conclusions: in radiation fields where most of the dose comes from photons, especially x-rays, it is appropriate to use dosemeters calibrated in terms of H p (0.07) on a slab phantom, while in other radiation fields (dominated by beta radiation or unknown contributions of photon and beta radiation) dosemeters calibrated in terms of H p (3) on a slab phantom should be used. As an alternative, dosemeters calibrated in terms of H p (0.07) on a slab phantom could also be used; however, in radiation fields containing beta radiation with the end point energy near 1 MeV, an overestimation of the eye lens dose by up to a factor of 550 is possible.

A Generalized Pivotal Quantity Approach to Analytical Method Validation Based on Total Error.

Science.gov (United States)

Yang, Harry; Zhang, Jianchun

2015-01-01

The primary purpose of method validation is to demonstrate that the method is fit for its intended use. Traditionally, an analytical method is deemed valid if its performance characteristics such as accuracy and precision are shown to meet prespecified acceptance criteria. However, these acceptance criteria are not directly related to the method's intended purpose, which is usually a gurantee that a high percentage of the test results of future samples will be close to their true values. Alternate "fit for purpose" acceptance criteria based on the concept of total error have been increasingly used. Such criteria allow for assessing method validity, taking into account the relationship between accuracy and precision. Although several statistical test methods have been proposed in literature to test the "fit for purpose" hypothesis, the majority of the methods are not designed to protect the risk of accepting unsuitable methods, thus having the potential to cause uncontrolled consumer's risk. In this paper, we propose a test method based on generalized pivotal quantity inference. Through simulation studies, the performance of the method is compared to five existing approaches. The results show that both the new method and the method based on β-content tolerance interval with a confidence level of 90%, hereafter referred to as the β-content (0.9) method, control Type I error and thus consumer's risk, while the other existing methods do not. It is further demonstrated that the generalized pivotal quantity method is less conservative than the β-content (0.9) method when the analytical methods are biased, whereas it is more conservative when the analytical methods are unbiased. Therefore, selection of either the generalized pivotal quantity or β-content (0.9) method for an analytical method validation depends on the accuracy of the analytical method. It is also shown that the generalized pivotal quantity method has better asymptotic properties than all of the current

Determination of the Composition and Quantity of Phthalate Ester Additives in PVC Children's Toys. Greenpeace Research Laboratories Technical Note 06/97.

Science.gov (United States)

Stringer, Ruth; Labounskaia, Irina; Santillo, David; Johnston, Paul; Siddorn, John; Stephenson, Angela

Polyvinyl chloride (vinyl or PVC) is widely used in toys and other children's products. This study, conducted by Greenpeace, examined the composition and quantity of phthalate ester additives in children's PVC toys, used to give the toys added flexibility. Drawn from 17 countries, a total of 71 toys designed to be chewed by babies and young…

Units for physical quantities used in dosimetry and radiation protection

Energy Technology Data Exchange (ETDEWEB)

Taubert, R; Wagner, S

1976-04-01

The 15th General Conference on Weights and Measures (1975) decided to introduce the name Becquerel for the SI unit of the quantity activity (1 Bq = 1 s/sup -1/) and the name Gray for the SI unit of ionizing radiations (1 Gy = 1 J/kg). The consequences of this latter decision are discussed. The Bundesanstalt is of the opinion that no further names for this unit should be introduced, but that the Gray should be used also for other quantities of the same dimension, especially for the dose equivalent.

Effect of using radiation and some growth promoters on the economics of egg production during the second production season in egypt

International Nuclear Information System (INIS)

Solieman, M.H.M.

1996-01-01

Layer chicken farms are considered important projects which play a major role in the national economy, for their fast money cycles and their high profits. Many breeders have shared in animal production and egg production through the private projects in Egypt. Our government also established many layer chicken farms to solve the production problems and actual consumption food problems in egypt are due to a lack of food quality and quantity as well as in food calory. The egyptian consumer dose not obtain the same quantity of protein as his counter parts in the developed countries: Particular egg protein which considers a cheap source. 36 tabs.,5 figs.,21 refs

FMEF/experimental capabilities

International Nuclear Information System (INIS)

Burgess, C.A.; Dronen, V.R.

1981-01-01

The Fuels and Materials Examination Facility (FMEF), under construction at the Hanford site north of Richland, Washington, will be one of the most modern facilities offering irradiated fuels and materials examination capabilities and fuel fabrication development technologies. Scheduled for completion in 1984, the FMEF will provide examination capability for fuel assemblies, fuel pins and test pins irradiated in the FFTF. Various functions of the FMEF are described, with emphasis on experimental data-gathering capabilities in the facility's Nondestructive and Destructive examination cell complex

The APT program plan: Providing an assured tritium production capability

International Nuclear Information System (INIS)

Lisowski, P.W.; Anderson, J.L.; Bishop, W.P.; Boggs, B.; Hall, K.

1996-01-01

Tritium is a radioactive hydrogen isotope used in all U.S. nuclear weapons. Because the half-life of tritium is short, 12.3 yr, it must be periodically replenished. To provide a new source, the U.S. Department of Energy (DOE) is sponsoring conceptual design and engineering development and demonstration activities for a plant that will use a high-power proton linear accelerator to produce tritium and will go on-line no later than 2007. The APT project is in the process of completing the conceptual design for a tritium production plant. In addition, there are several important areas under engineering development and demonstration that will ensure an efficient, cost-effective plant design and provide an adequate margin of tritium production. Information provided from this work will be used by the DOE in its 1998 choice of production technology implementation

Would more social partners leads to enhanced health? The paradox between quantity and quality.

Science.gov (United States)

Xing, Cai; Zhang, Xin; Cheng, Sheung-Tak

2017-09-01

In the current investigation, we examined the association between social network composition (SNC) and mental health, as well as whether quantity and quality of social network could influence mental health differently. The social network quantity and quality of 345 middle-aged and older Chinese adults were measured by the Social Convoy Questionnaire. The Chinese version of the Medical Outcome Studies 36-item Short-Form Health Survey (SF-36) was used to assess mental health while controlling for physical health. It was found that both quantity and quality of social network were associated with mental health, and more specifically that (1) quantity of peripheral partners (PP) was positively associated with mental health; (2) quality of emotionally close social partners (ECSP) influenced mental health the most; and (3) paradoxically, the effect of ECSP quality on mental health depended on quantity of ECSP, that is, participants with more ECSP showed a stronger association between ECSP quality and mental health. The findings replicated and extended previous studies on SNC and suggested that structure/quantity and quality of SNC were both important for mental health. © 2017 The Institute of Psychology, Chinese Academy of Sciences and John Wiley & Sons Australia, Ltd.

Characterization of Lactobacillus salivarius strains B37 and B60 capable of inhibiting IL-8 production in Helicobacter pylori-stimulated gastric epithelial cells.

Science.gov (United States)

Panpetch, Wimonrat; Spinler, Jennifer K; Versalovic, James; Tumwasorn, Somying

2016-10-18

Interleukin (IL)-8 is the key agent for initiating an inflammatory response to infection with Helicobacter pylori. Some strains of Lactobacillus spp. are known to colonize the stomach and suppress inflammation caused by H. pylori. In this study, we characterized two gastric-derived lactobacilli, Lactobacillus salivarius (LS) strains B37 and B60, capable of inhibiting H. pylori-induced IL-8 production by gastric epithelial cells. Conditioned media from LS-B37 and LS-B60 suppressed H. pylori-induced IL-8 production and mRNA expression from AGS cells without inhibiting H. pylori growth. These conditioned media suppressed the activation of NF-κB but did not suppress c-Jun activation. IL-8 inhibitory substances in conditioned media of LS-B37 and LS-B60 are heat-stable and larger than 100 kDa in size. The inhibitory activity of LS-B37 was abolished when the conditioned medium was treated with α-amylase but still remained when treated with either proteinase K, trypsin, lipase or lysozyme. The activity of LS-B60 was abolished when the conditioned medium was treated with either amylase or proteinase K but still remained when treated with lysozyme. Treatment with lipase and trypsin also significantly affected the inhibitory activity of LS-B60 although the conditioned medium retained IL-8 suppression statistically different from media control. These results suggest that L. salivarius strains B37 and B60 produce different immunomodulatory factors capable of suppressing H. pylori-induced IL-8 production from gastric epithelial cells. Our results suggest that the large, heat-stable immunomodulatory substance(s) present in the LCM of LS-B37 is a polysaccharide, while the one(s) of LS-B60 is either complex consisting of components of polysaccharide, lipid and protein or includes multiple components such as glycoprotein and lipoprotein.

Results of the regional intercomparison exercise for the determination of operational quantity Hp(d) in Latin America

International Nuclear Information System (INIS)

Saravi, M.; Zaretzky, A.; Lindner, C.; Diaz, J.; Walwyn, G.; Souza, D.; Amorin, R.; Gregory, B.; Papadopulos, S.; Meghzifene, A.; Ferruz Cruz, P.; Cruz Suarez, R.

2005-01-01

Full text: Several intercomparison exercises were organized by the International Atomic Energy Agency (IAEA) on the determination of operational quantities at the regional or interregional basis. These exercises revealed significant differences in the approach, methods and assumptions, and consequently in the measurement results obtained by participating laboratories. In the Latin America region, an intercomparison for determination of operational quantity Hp(10), organized within the frame of a technical cooperation regional project, was completed mid-2004, as a follow-up to previous exercises carried out during the 1990s. Eighteen laboratories from 19 member states participated in the first phase; the second phase grouped 15 laboratories from 16 member states. Dosimeter irradiations (5 different radiation qualities for photon simulating workplace fields) were done by 4 Secondary Standards Dosimetry Laboratories (SSDL). The preparations for the exercise involved an audit by the IAEA SSDL, where reference irradiations were provided to all participants for verification of their system. During the first phase (2002/03), only 9 out of 18 laboratories met the performance requirements for such monitoring services. Necessary corrective actions and procedure verification were implemented, and staff involved in these evaluations were subsequently trained. During the second phase (2004), 11 out of 15 laboratories fulfilled the performance criteria. The 4 laboratories still having difficulties in assessing occupational exposure participated in a results meeting, during which problem areas were identified. An ongoing technical cooperation mission is expected to assist these laboratories accordingly. There has been a definite improvement in the second phase and most laboratories demonstrated a good performance in the quantity tested. The technical results clearly show that the laboratories' capability in assessing occupational exposure from external sources of radiation is

Assessing the origins, evolution and prospects of the literature on dynamic capabilities: A bibliometric analysis

Directory of Open Access Journals (Sweden)

Gema Albort-Morant

2018-01-01

Full Text Available The purpose of this study is to serve as orientation and guidance to academics that are starting or currently developing their research within the field of dynamic capabilities, in order to enhance their knowledge about which are the key scientific journals, authors and articles shaping this topic. This paper presents a bibliometric analysis on dynamic capabilities, making use of the Web of Science database to perform it. This analysis comprises fundamental issues such as (i the number of studies published per year, (ii the countries with the highest rate of productivity, (iii the most prolific and influential authors, (iv assessment of studies citing dynamic capabilities, and (v the most productive journals on dynamic capabilities and recent studies on this topic. Results reveal an exponential growth in the number of publications on dynamic capabilities for the 2000–2012 period. Although, since 2012 this growth has decelerated, the number of publications on this topic remains noteworthy. This study brings useful information for those academics and practitioners attempting to analyze and deepen within this particular field of research, at the same time that provides some insights concerning the future development and progress of the dynamic capabilities topic in the management, business and economics academic literature.

NGNP Data Management and Analysis System Analysis and Web Delivery Capabilities

Energy Technology Data Exchange (ETDEWEB)

Cynthia D. Gentillon

2010-09-01

Projects for the Very High Temperature Reactor Technology Development Office provide data in support of Nuclear Regulatory Commission licensing of the very high temperature reactor. Fuel and materials to be used in the reactor are tested and characterized to quantify performance in high-temperature and high-fluence environments. In addition, thermal-hydraulic experiments are conducted to validate codes used to assess reactor safety. The Very High Temperature Reactor Technology Development Office has established the NGNP Data Management and Analysis System (NDMAS) at the Idaho National Laboratory to ensure that very high temperature reactor data are (1) qualified for use, (2) stored in a readily accessible electronic form, and (3) analyzed to extract useful results. This document focuses on the third NDMAS objective. It describes capabilities for displaying the data in meaningful ways and for data analysis to identify useful relationships among the measured quantities.

Mapping the Technological Capabilities of Ethiopian-owned Firms in the Apparel Global Value Chain

DEFF Research Database (Denmark)

Whitfield, Lindsay; Staritz, Cornelia

firms and their positions within the apparel global value chain, as well as how they have fared and which challenges they continue to face. Generally, the 14 local exporting firms have low technological capabilities and struggle to meet export requirements, despite important diversity among them...... exporting apparel or made-up textiles. To export, local firms have to be able to deliver consistently products at a certain price and quality and to meet delivery deadlines, which require developing new technological capabilities. This paper analyses the level of capabilities among Ethiopian-owned exporting......, quality and delivery standards of export markets. Therefore, most local firms use the domestic market as a means to subsidize the cost of learning to compete, but they also use what they learn through exporting in terms of productivity, quality and design for their domestic market business....

The effect of vial type and cocktail quantity on tritium measurement in LSC

International Nuclear Information System (INIS)

Chen Zhilin; Xing Shixiong; Wang Heyi; Chang Ruimin; Wu Guanyin; Zhou Yinhang

2010-01-01

The effect of sample vial type and cocktail quantity on tritium measurement in liquid scintillation counting is studied in this paper. With both high and low level tritium samples, glass vials allow higher counting rates than plastic vials do. We also present detailed analysis of the way to obtain the optimal counting condition by dispensing different quantity of cocktail into sample vials. Results indicate that the optimal counting condition has little relationship with tritium concentration in the sample. The main factor which influences the counting is the quantity of cocktail added into samples. Figure of merit is employed to access the results, which increases as the quantity of cocktail increasing. But when the ratio of cocktail and sample reaches 2.0, increase of ratio makes little contribution to the counts, and the disintegrations per minute comes nearly to be a constant.

OBT analysis method using polyethylene beads for limited quantities of animal tissue

International Nuclear Information System (INIS)

Kim, S.B.; Stuart, M.

2015-01-01

This study presents a polyethylene beads method for OBT determination in animal tissues and animal products for cases where the amount of water recovered by combustion is limited by sample size or quantity. In the method, the amount of water recovered after combustion is enhanced by adding tritium-free polyethylene beads to the sample prior to combustion in an oxygen bomb. The method reduces process time by allowing the combustion water to be easily collected with a pipette. Sufficient water recovery was achieved using the polyethylene beads method when 2 g of dry animal tissue or animal product were combusted with 2 g of polyethylene beads. Correction factors, which account for the dilution due to the combustion water of the beads, are provided for beef, chicken, pork, fish and clams, as well as egg, milk and cheese. The method was tested by comparing its OBT results with those of the conventional method using animal samples collected on the Chalk River Laboratories (CRL) site. The results determined that the polyethylene beads method added no more than 25% uncertainty when appropriate correction factors are used. - Highlights: • Polyethylene beads method for OBT determination in animal tissues and animal products were determined. • The method reduces process time. • The polyethylene beads method added no more than 25% uncertainty when appropriate correction factors are used

Symbolic Estrangement: Evidence against a Strong Association between Numerical Symbols and the Quantities They Represent

Science.gov (United States)

Lyons, Ian M.; Ansari, Daniel; Beilock, Sian L.

2012-01-01

Are numerals estranged from a sense of the actual quantities they represent? We demonstrate that, irrespective of numerical size or distance, direct comparison of the relative quantities represented by symbolic and nonsymbolic formats leads to performance markedly worse than when comparing 2 nonsymbolic quantities (Experiment 1). Experiment 2…

The Exploration of Design Driven Innovation as a Dynamic Capability

Directory of Open Access Journals (Sweden)

Philips Kembaren

2012-01-01

Full Text Available Innovation enables companies to attain consistent organic growth that brings benefits to stakeholders. Designthinking approach in innovation has been emergent to be an alternative to technological development path inorder to generate competitive and successful product or service in the market place. Design driven innovationcombines functional and semantic dimensions of products or services in the marketplace. Previous researchhas recently revealed practices of design driven innovation in various industries. However, little is known tothe extent that companies in Indonesia practicing design driven innovation. A theoretical framework withperspective from dynamic capability theoretical lens and guided by Dubin’s theory building methodology isproposed to explain the constructs and role of design in the process of innovation. The research is expected tocontribute a new construct to the existing framework, namely construct that related to how we could assessthe value of the design-driven innovation output, perceived by the costumers.Keywords: design driven innovation, dynamic capabilities, theory building

Capabilities for managing high-volume production of electric engineering equipment at the Electrochemical Production Plant

Energy Technology Data Exchange (ETDEWEB)

Podlednev, V.M.

1996-04-01

The Electromechanical Production Plant is essentially a research center with experimental facilities and power full testing base. Major products of the plant today include heat pipes and devices of their basis of different functions and power from high temperature ranges to cryogenics. This report describes work on porous titanium and carbon-graphite current collectors, electrocatalyst synthesis, and electrocatalyst applications.

Chromatographic cation exchange separation of decigram quantities of californium and other transplutonium elements

Energy Technology Data Exchange (ETDEWEB)

Benker, D.E.; Chattin, F.R.; Collins, E.D.; Knauer, J.B.; Orr, P.B.; Ross, R.G.; Wiggins, J.T.

1980-01-01

Decigram quantities of highly radioactive transplutonium elements are routinely partitioned at TRU by chromatographic elution from cation resin using AHIB eluent. By using two high-pressure ion exchange columns, a small one for the initial loading of the feed and a large one for the elution, batch runs containing up to 200 mg of /sup 252/Cf can be made in about 5 hours (2 hours to load the feed and 3 hours for the elution). The number of effluent product fractions and the amount of actinides that must be collected in intermediate fractions are minimized by monitoring response from a flow-through alpha-detector. This process has been reliable and relatively easy to operate, and will continue to be used for partitioning transplutonium elements at TRU.

Quantity assessment of waste in the dismantlement of liquid waste treatment plant and its actual state

International Nuclear Information System (INIS)

Uchiyama, Takafumi; Mitsuhashi, Ishi; Matsumoto, Tetsuo; Morishima, Kayoko; Tanzawa, Tomio

2016-01-01

From the progress of decommissioning project work of Tokyo City University Atomic Energy Research Institute, this paper reports the comparison between the actual amount of the waste generated during dismantlement work at liquid waste treatment facilities and the assessment quantity before starting the dismantlement. The quantity assessment was made on the basis of the installation license application, design specifications, drawings, records, history of use, site investigation results, etc. Since this quantity assessment did not take into account the dismantling contents of reservoir concrete, the assessed quantity of non-radioactive waste (NR waste) did not match the sum of actual NR waste. However, if an actually generated quantity of concrete of radioactive waste was added to the quantity assessment as NR waste, the quantity of actually generated NR waste and that of assessed NR waste were nearly consistent, which verified the validity of this assessment. This method is considered to be able to be utilized in the future quantity assessment of decommissioning work and the like. On the other hand, it was found that the number of drums that were actually stored tended to increase more than the estimated number of drum conversion. In old buildings, it is necessary to take into account the generation of waste other than radioactive materials in the quantity assessment stage and dismantlement stage. (A.O.)

Developing Alliance Capabilities

DEFF Research Database (Denmark)

Heimeriks, Koen H.; Duysters, Geert; Vanhaverbeke, Wim

This paper assesses the differential performance effects of learning mechanisms on the development of alliance capabilities. Prior research has suggested that different capability levels could be identified in which specific intra-firm learning mechanisms are used to enhance a firm's alliance...

Do human parents face a quantity-quality tradeoff?: evidence from a Shuar community.

Science.gov (United States)

Hagen, Edward H; Barrett, H Clark; Price, Michael E

2006-07-01

A number of evolutionary theories of human life history assume a quantity-quality tradeoff for offspring production: parents with fewer offspring can have higher biological fitness than those with more. Direct evidence for such a tradeoff, however, is mixed. We tested this assumption in a community of Ecuadorian Shuar hunter-horticulturalists, using child anthropometry as a proxy for fitness. We measured the impact of household consumer/producer (CP) ratio on height, weight, skinfold thicknesses, and arm and calf circumferences of 85 children and young adults. To control for possible "phenotypic" correlates that might mask the effect of CP ratio on anthropometry, we also measured household garden productivity, wealth, and social status. Regression models of the age-standardized variables indicated a significant negative impact of CP ratio on child growth and nutrition. The age-standardized height and weight of children in households with the largest CP ratio (10) were 1.38 and 1.44 standard deviations, respectively, below those of children in households with the smallest CP ratio (2). Surprisingly, garden productivity, wealth, and status had little to no effect on the fitness proxies. There was, however, an interesting and unexpected interaction between status and sex: for females, but not males, higher father status correlated significantly with higher values on the proxies.

Threshold quantities for infectious diseases in periodic environments

NARCIS (Netherlands)

Heesterbeek, J.A.P.; Roberts, M.G.

1995-01-01

In this short note we give threshold quantities that determine the stability of the infection-free steady state for periodic deterministic systems that describe the spread of infectious diseases in populations whose individuals can be divided into a finite number of distinct groups. We concentrate

Seed production for fuel oils

International Nuclear Information System (INIS)

Mosca, G.

1992-01-01

With the aim of assessing commercialization prospects for vegetable oils to be used as diesel fuel alternatives, this paper provides maps indicating regional production quantities for soybean, rape and sunflower seeds in Italy. It then tables and discusses the results of energy input-output analyses carried out for rape and soybean oil production

Systems Security Engineering Capability Maturity Model (SSECMM), Model Description, Version 1.1

National Research Council Canada - National Science Library

1997-01-01

This document is designed to acquaint the reader with the SSE-CMM Project as a whole and present the project's major work product - the Systems Security Engineering Capability Maturity Model (SSE- CMM...

In field application of differential Die-Away time technique for detecting gram quantities of fissile materials

Science.gov (United States)

Remetti, Romolo; Gandolfo, Giada; Lepore, Luigi; Cherubini, Nadia

2017-10-01

In the frame of Chemical, Biological, Radiological, and Nuclear defense European activities, the ENEA, the Italian National Agency for New Technologies, Energy and Sustainable Economic Development, is proposing the Neutron Active Interrogation system (NAI), a device designed to find transuranic-based Radioactive Dispersal Devices hidden inside suspected packages. It is based on Differential Die-Away time Analysis, an active neutron technique targeted in revealing the presence of fissile material through detection of induced fission neutrons. Several Monte Carlo simulations, carried out by MCNPX code, and the development of ad-hoc design methods, have led to the realization of a first prototype based on a 14 MeV d-t neutron generator coupled with a tailored moderating structure, and an array of helium-3 neutron detectors. The complete system is characterized by easy transportability, light weight, and real-time response. First results have shown device's capability to detect gram quantities of fissile materials.

Quality and quantity: the role of social interactions in individual health

OpenAIRE

Damiano, Fiorillo; Fabio, Sabatini

2011-01-01

The public health literature focusing on the detrimental effects of social isolation has shown that the quantity of social connections is positively correlated with individual health. Drawing on pooled cross-sectional data, we test this hypothesis on a representative sample of the Italian population. Our findings show that, besides the quantity of interactions, it is their quality – as measured by subjective satisfaction derived from relationships with friends – that works as the best pre...

Unified Symmetry and Conserved Quantities of Mechanical System in Phase Space

International Nuclear Information System (INIS)

Fang Jianhui; Ding Ning; Wang Peng

2006-01-01

In this paper, a new symmetry and its conserved quantities of a mechanical system in phase space are studied. The definition of this new symmetry, i.e., a unified one is presented, and the criterion of this symmetry is also given. The Noether, the generalized Hojman and the Mei conserved quantities of the unified symmetry of the system are obtained. The unified symmetry contains the Noether, the Lie and the Mei symmetries, and has more generalized significance.

9 CFR 101.3 - Biological products and related terms.

Science.gov (United States)

2010-01-01

... as required by the regulations. (e) Released product. A finished product released for marketing after... total quantity of completed product which has been thoroughly mixed in a single container and identified... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Biological products and related terms...

Comparisons of processes and performance of SSC-VQP material

International Nuclear Information System (INIS)

Seuntjens, J.M.; Clark, F.Y.; Erdmann, M.J.; Coleman, E.S.; Jones, B.A.

1994-01-01

The Superconducting Super Collider's (SSC) cable Vendor Qualification Program (VQP) will end in FY 1993. At the time of this writing, all 8 vendors involved in this program have demonstrated capability to fabricate conductor which meets SSC specifications. The magnet vendors have hard choices to make in calendar year 1993 in deciding which cable vendors will make the production cable. It is well accepted that because of requirements of magnet uniformity, that only one vendor will be chosen for dipole Inner cable, one vendor for dipole Outer cable, and one vendor for quadrupole Outer cable. The production quantities are nominally 500, 500, and 200 metric tonnes, respectively. Among the many deciding factors are a technically sound production process, process control, and production quantity capability of each cable vendor. Qualified vendors will have proven their technical process and process control is adequate for production quantities. This paper is part of ongoing effort to provide technical information for the magnet vendor's decision making process. Some of the Phase IB process data is summarized as well as results of a portion of the materials characterization performed at the SSC Laboratory. Key process and final product parameters for each cable vendor are compared without identifying specific vendor's process detail

Comparisons of processes and performance of SSC-VQP material

International Nuclear Information System (INIS)

Seuntjens, J.; Clark, F.; Erdmann, M.; Coleman, E.; Jones, B.

1993-05-01

The Superconducting Super Collider's (SSC) cable Vendor Qualification Program (VQP) will end in FY 1993. At the time of this writing, all 8 vendors involved in this program have demonstrated capability to fabricate conductor which meets SSC specifications. The magnet vendors have hard choices to make in calendar year 1993 in deciding which cable vendors will make the production cable. It is well accepted that because of requirements of magnet uniformity, that only one vendor will be chosen for dipole Inner cable, one vendor for dipole Outer cable, and one vendor for quadrupole Outer cable. The production quantities are nominally 500, 500, and 200 metric tonnes, respectively. Among the many deciding factors are a technically sound production process, process control, and production quantity capability of each cable vendor. Qualified vendors will have proven their technical process and process control is adequate for production quantities. This paper is part of ongoing effort to provide technical information for the magnet vendor's decision making process. Some of the Phase IB process data is summarized and well as results of a portion of the materials characterization performed at the SSC Laboratory. Key process and final product parameters for each cable vendor are compared without identifying specific vendor's process detail

Extending the Lunar Mapping and Modeling Portal - New Capabilities and New Worlds

Science.gov (United States)

Day, B. H.; Law, E.; Arevalo, E.; Bui, B.; Chang, G.; Dodge, K.; Kim, R. M.; Malhotra, S.; Sadaqathullah, S.

2015-12-01

NASA's Lunar Mapping and Modeling Portal (LMMP) provides a web-based Portal and a suite of interactive visualization and analysis tools to enable mission planners, lunar scientists, and engineers to access mapped lunar data products from past and current lunar missions (http://lmmp.nasa.gov). During the past year, the capabilities and data served by LMMP have been significantly expanded. New interfaces are providing improved ways to access and visualize data. Many of the recent enhancements to LMMP have been specifically in response to the requirements of NASA's proposed Resource Prospector lunar rover, and as such, provide an excellent example of the application of LMMP to mission planning. At the request of NASA's Science Mission Directorate, LMMP's technology and capabilities are now being extended to additional planetary bodies. New portals for Vesta and Mars are the first of these new products to be released. On March 31, 2015, the LMMP team released Vesta Trek (http://vestatrek.jpl.nasa.gov), a web-based application applying LMMP technology to visualizations of the asteroid Vesta. Data gathered from multiple instruments aboard Dawn have been compiled into Vesta Trek's user-friendly set of tools, enabling users to study the asteroid's features. With an initial release on July 1, 2015, Mars Trek replicates the functionality of Vesta Trek for the surface of Mars. While the entire surface of Mars is covered, higher levels of resolution and greater numbers of data products are provided for special areas of interest. Early releases focus on past, current, and future robotic sites of operation. Future releases will add many new data products and analysis tools as Mars Trek has been selected for use in site selection for the Mars 2020 rover and in identifying potential human landing sites on Mars. Other destinations will follow soon. The user community is invited to provide suggestions and requests as the development team continues to expand the capabilities of LMMP