WorldWideScience

Sample records for production lot size

  1. Tactical Production and Lot Size Planning with Lifetime Constraints

    DEFF Research Database (Denmark)

    Raiconi, Andrea; Pahl, Julia; Gentili, Monica

    2017-01-01

    In this work, we face a variant of the capacitated lot sizing problem. This is a classical problem addressing the issue of aggregating lot sizes for a finite number of discrete periodic demands that need to be satisfied, thus setting up production resources and eventually creating inventories...

  2. PENENTUAN PRODUCTION LOT SIZES DAN TRANSFER BATCH SIZES DENGAN PENDEKATAN MULTISTAGE

    Directory of Open Access Journals (Sweden)

    Purnawan Adi W

    2012-02-01

    optimal lot size in a system of production with several types. Analysis of production batch (production lot using hybrid analytic simulation is one kind of research about optimal lot size. That research uses single-stage system approach where there are not relationships between processes in every stage or in other word; one process is independent to other process. Using the same research object with one before, this research then take up problem how to determine production lot size with multi-stage approach. First, determining optimal production lot size by linear program using the same data with previous research. Then, production lot size is used as simulation input to determine transfer batch size. Average of queue length and waiting time as performance measurement are used as reference in determining transfer batch size from several alternatives.In this research, it shows that production lot size is same with demand each period. Determination result of transfer batch size by using simulation then implemented on model. The result is descent of inventory of connector product at 76.35% and 50.59% for box connector product, as compared to inventory using single-stage approach. Keywords : multistage, production lot, transfer batch

  3. Green Lot-Sizing

    NARCIS (Netherlands)

    M. Retel Helmrich (Mathijn Jan)

    2013-01-01

    textabstractThe lot-sizing problem concerns a manufacturer that needs to solve a production planning problem. The producer must decide at which points in time to set up a production process, and when he/she does, how much to produce. There is a trade-off between inventory costs and costs associated

  4. The economic production lot size model with several production rates

    DEFF Research Database (Denmark)

    Larsen, Christian

    should be chosen in the interval between the demand rate and the production rate, which minimize unit production costs, and should be used in an increasing order. Then, given the production rates, we derive closed form solutions for the optimal runtimes as well as the minimum average cost. Finally we...

  5. A Markov decision model for optimising economic production lot size ...

    African Journals Online (AJOL)

    Adopting such a Markov decision process approach, the states of a Markov chain represent possible states of demand. The decision of whether or not to produce additional inventory units is made using dynamic programming. This approach demonstrates the existence of an optimal state-dependent EPL size, and produces ...

  6. Single product lot-sizing on unrelated parallel machines with non-decreasing processing times

    Science.gov (United States)

    Eremeev, A.; Kovalyov, M.; Kuznetsov, P.

    2018-01-01

    We consider a problem in which at least a given quantity of a single product has to be partitioned into lots, and lots have to be assigned to unrelated parallel machines for processing. In one version of the problem, the maximum machine completion time should be minimized, in another version of the problem, the sum of machine completion times is to be minimized. Machine-dependent lower and upper bounds on the lot size are given. The product is either assumed to be continuously divisible or discrete. The processing time of each machine is defined by an increasing function of the lot volume, given as an oracle. Setup times and costs are assumed to be negligibly small, and therefore, they are not considered. We derive optimal polynomial time algorithms for several special cases of the problem. An NP-hard case is shown to admit a fully polynomial time approximation scheme. An application of the problem in energy efficient processors scheduling is considered.

  7. Exponential Smoothing for Multi-Product Lot-Sizing With Heijunka and Varying Demand

    OpenAIRE

    Grimaud Frédéric; Dolgui Alexandre; Korytkowski Przemyslaw

    2014-01-01

    Here we discuss a multi-product lot-sizing problem for a job shop controlled with a heijunka box. Demand is considered as a random variable with constant variation which must be absorbed somehow by the manufacturing system, either by increased inventory or by flexibility in the production. When a heijunka concept (production leveling) is used, fluctuations in customer orders are not transferred directly to the manufacturing system allowing for a smoother production and better production capac...

  8. Exponential Smoothing for Multi-Product Lot-Sizing With Heijunka and Varying Demand

    Directory of Open Access Journals (Sweden)

    Grimaud Frédéric

    2014-06-01

    Full Text Available Here we discuss a multi-product lot-sizing problem for a job shop controlled with a heijunka box. Demand is considered as a random variable with constant variation which must be absorbed somehow by the manufacturing system, either by increased inventory or by flexibility in the production. When a heijunka concept (production leveling is used, fluctuations in customer orders are not transferred directly to the manufacturing system allowing for a smoother production and better production capacity utilization. The problem rather is to determine a tradeoff between the variability in the production line capacity requirement and the inventory level.

  9. Transportation and Production Lot-size for Sugarcane under Uncertainty of Machine Capacity

    Directory of Open Access Journals (Sweden)

    Sudtachat Kanchala

    2018-01-01

    Full Text Available The integrated transportation and production lot size problems is important effect to total cost of operation system for sugar factories. In this research, we formulate a mathematic model that combines these two problems as two stage stochastic programming model. In the first stage, we determine the lot size of transportation problem and allocate a fixed number of vehicles to transport sugarcane to the mill factory. Moreover, we consider an uncertainty of machine (mill capacities. After machine (mill capacities realized, in the second stage we determine the production lot size and make decision to hold units of sugarcane in front of mills based on discrete random variables of machine (mill capacities. We investigate the model using a small size problem. The results show that the optimal solutions try to choose closest fields and lower holding cost per unit (at fields to transport sugarcane to mill factory. We show the results of comparison of our model and the worst case model (full capacity. The results show that our model provides better efficiency than the results of the worst case model.

  10. Stability measures for rolling schedules with applications to capacity expansion planning, master production scheduling, and lot sizing

    OpenAIRE

    Kimms, Alf

    1996-01-01

    This contribution discusses the measurement of (in-)stability of finite horizon production planning when done on a rolling horizon basis. As examples we review strategic capacity expansion planning, tactical master production schedulng, and operational capacitated lot sizing.

  11. The economic production lot size model extended to include more than one production rate

    DEFF Research Database (Denmark)

    Larsen, Christian

    2001-01-01

    btween the demand rate and the production rate which minimizes unit production costs, and should be used in an increasing order. Then, given the production rates, we derive closed-form expressions for all optimal runtimes as well as the minimum average cost. This analysis reveals that it is the size...... of the setup cost that determines the need for being able to use several production rates. Finally, we show how to derive a near-optimal solution of the general problem....

  12. The economic production lot size model extended to include more than one production rate

    DEFF Research Database (Denmark)

    Larsen, Christian

    2005-01-01

    production rates should be chosen in the interval between the demand rate and the production rate which minimizes unit production costs, and should be used in an increasing order. Then, given the production rates, we derive closed-form expressions for all optimal runtimes as well as the minimum average cost....... This analysis reveals that it is the size of the setup cost that determines the need for being able to use several production rates. We also show how to derive a near-optimal solution of the general problem....

  13. Flexible lot sizing in hybrid make-to-order/make-to-stock production planning

    NARCIS (Netherlands)

    Beemsterboer, Bart; Land, Martin; Teunter, Ruud

    2017-01-01

    Hybrid make-to-order/make-to-stock production systems are difficult to control. Batch production of make-to-stock products allows for efficient capacity usage, but fixed batch sizes can make the system less responsive to make-to-order customers. Using Markov Decision Process modeling, we show that

  14. Polynomial Time Algorithms For Some Multi-Level Lot-Sizing Problems With Production Capacities

    NARCIS (Netherlands)

    S. van Hoesel (Stan); H.E. Romeijn (Edwin); D. Romero Morales (Dolores); A.P.M. Wagelmans (Albert)

    2002-01-01

    textabstractWe consider a model for a serial supply chain in which production, inventory, and transportation decisions are integrated, in the presence of production capacities and for different transportation cost functions. The model we study is a generalization of the traditional single-item

  15. Lot-sizing for a single-stage single-product production system with rework of perishable production defectives

    NARCIS (Netherlands)

    Teunter, R.; Flapper, S.D.P.

    2003-01-01

    We consider a single-stage single-product production system. Produced units may be non-defective, reworkable defective, or non-reworkable defective. The system switches between production and rework. After producing a fixed number (N) of units, all reworkable defective units are reworked. Reworkable

  16. The economic lot size and relevant costs

    NARCIS (Netherlands)

    Corbeij, M.H.; Jansen, R.A.; Grübström, R.W.; Hinterhuber, H.H.; Lundquist, J.

    1993-01-01

    In many accounting textbooks it is strongly argued that decisions should always be evaluated on relevant costs; that is variable costs and opportunity costs. Surprisingly, when it comes to Economic Order Quantities or Lot Sizes, some textbooks appear to be less straightforward. The question whether

  17. Competition under capacitated dynamic lot-sizing with capacity acquisition

    DEFF Research Database (Denmark)

    Li, Hongyan; Meissner, Joern

    2011-01-01

    Lot-sizing and capacity planning are important supply chain decisions, and competition and cooperation affect the performance of these decisions. In this paper, we look into the dynamic lot-sizing and resource competition problem of an industry consisting of multiple firms. A capacity competition...... production setup, along with inventory carrying costs. The individual production lots of each firm are limited by a constant capacity restriction, which is purchased up front for the planning horizon. The capacity can be purchased from a spot market, and the capacity acquisition cost fluctuates...

  18. Optimal Multi-Level Lot Sizing for Requirements Planning Systems

    OpenAIRE

    Earle Steinberg; H. Albert Napier

    1980-01-01

    The wide spread use of advanced information systems such as Material Requirements Planning (MRP) has significantly altered the practice of dependent demand inventory management. Recent research has focused on development of multi-level lot sizing heuristics for such systems. In this paper, we develop an optimal procedure for the multi-period, multi-product, multi-level lot sizing problem by modeling the system as a constrained generalized network with fixed charge arcs and side constraints. T...

  19. Cellular Manufacturing System with Dynamic Lot Size Material Handling

    Science.gov (United States)

    Khannan, M. S. A.; Maruf, A.; Wangsaputra, R.; Sutrisno, S.; Wibawa, T.

    2016-02-01

    Material Handling take as important role in Cellular Manufacturing System (CMS) design. In several study at CMS design material handling was assumed per pieces or with constant lot size. In real industrial practice, lot size may change during rolling period to cope with demand changes. This study develops CMS Model with Dynamic Lot Size Material Handling. Integer Linear Programming is used to solve the problem. Objective function of this model is minimizing total expected cost consisting machinery depreciation cost, operating costs, inter-cell material handling cost, intra-cell material handling cost, machine relocation costs, setup costs, and production planning cost. This model determines optimum cell formation and optimum lot size. Numerical examples are elaborated in the paper to ilustrate the characterictic of the model.

  20. Optimal production lot size and reorder point of a two-stage supply chain while random demand is sensitive with sales teams' initiatives

    Science.gov (United States)

    Sankar Sana, Shib

    2016-01-01

    The paper develops a production-inventory model of a two-stage supply chain consisting of one manufacturer and one retailer to study production lot size/order quantity, reorder point sales teams' initiatives where demand of the end customers is dependent on random variable and sales teams' initiatives simultaneously. The manufacturer produces the order quantity of the retailer at one lot in which the procurement cost per unit quantity follows a realistic convex function of production lot size. In the chain, the cost of sales team's initiatives/promotion efforts and wholesale price of the manufacturer are negotiated at the points such that their optimum profits reached nearer to their target profits. This study suggests to the management of firms to determine the optimal order quantity/production quantity, reorder point and sales teams' initiatives/promotional effort in order to achieve their maximum profits. An analytical method is applied to determine the optimal values of the decision variables. Finally, numerical examples with its graphical presentation and sensitivity analysis of the key parameters are presented to illustrate more insights of the model.

  1. Lot Sizing Based on Stochastic Demand and Service Level Constraint

    Directory of Open Access Journals (Sweden)

    hajar shirneshan

    2012-06-01

    Full Text Available Considering its application, stochastic lot sizing is a significant subject in production planning. Also the concept of service level is more applicable than shortage cost from managers' viewpoint. In this paper, the stochastic multi period multi item capacitated lot sizing problem has been investigated considering service level constraint. First, the single item model has been developed considering service level and with no capacity constraint and then, it has been solved using dynamic programming algorithm and the optimal solution has been derived. Then the model has been generalized to multi item problem with capacity constraint. The stochastic multi period multi item capacitated lot sizing problem is NP-Hard, hence the model could not be solved by exact optimization approaches. Therefore, simulated annealing method has been applied for solving the problem. Finally, in order to evaluate the efficiency of the model, low level criterion has been used .

  2. Capacitated dynamic lot sizing with capacity acquisition

    DEFF Research Database (Denmark)

    Li, Hongyan; Meissner, Joern

    2011-01-01

    One of the fundamental problems in operations management is determining the optimal investment in capacity. Capacity investment consumes resources and the decision, once made, is often irreversible. Moreover, the available capacity level affects the action space for production and inventory...

  3. Capacitated Dynamic Lot Sizing with Capacity Acquisition

    DEFF Research Database (Denmark)

    Li, Hongyan; Meissner, Joern

    One of the fundamental problems in operations management is to determine the optimal investment in capacity. Capacity investment consumes resources and the decision is often irreversible. Moreover, the available capacity level affects the action space for production and inventory planning decisions...

  4. A Heuristic Approach for Determining Lot Sizes and Schedules Using Power-of-Two Policy

    Directory of Open Access Journals (Sweden)

    Esra Ekinci

    2007-01-01

    Full Text Available We consider the problem of determining realistic and easy-to-schedule lot sizes in a multiproduct, multistage manufacturing environment. We concentrate on a specific type of production, namely, flow shop type production. The model developed consists of two parts, lot sizing problem and scheduling problem. In lot sizing problem, we employ binary integer programming and determine reorder intervals for each product using power-of-two policy. In the second part, using the results obtained of the lot sizing problem, we employ mixed integer programming to determine schedules for a multiproduct, multistage case with multiple machines in each stage. Finally, we provide a numerical example and compare the results with similar methods found in practice.

  5. The Lot Sizing and Scheduling of Sand Casting Operations

    NARCIS (Netherlands)

    Hans, Elias W.; van de Velde, S.L.; van de Velde, Steef

    2011-01-01

    We describe a real world case study that involves the monthly planning and scheduling of the sand-casting department in a metal foundry. The problem can be characterised as a single-level multi-item capacitated lot-sizing model with a variety of additional process-specific constraints. The main

  6. MODEL JOINT ECONOMIC LOT SIZE PADA KASUS PEMASOK-PEMBELI DENGAN PERMINTAAN PROBABILISTIK

    Directory of Open Access Journals (Sweden)

    Wakhid Ahmad Jauhari

    2009-01-01

    Full Text Available In this paper we consider single vendor single buyer integrated inventory model with probabilistic demand and equal delivery lot size. The model contributes to the current literature by relaxing the deterministic demand assumption which has been used for almost all integrated inventory models. The objective is to minimize expected total costs incurred by the vendor and the buyer. We develop effective iterative procedures for finding the optimal solution. Numerical examples are used to illustrate the benefit of integration. A sensitivity analysis is performed to explore the effect of key parameters on delivery lot size, safety factor, production lot size factor and the expected total cost. The results of the numerical examples indicate that our models can achieve a significant amount of savings. Finally, we compare the results of our proposed model with a simulation model. Abstract in Bahasa Indonesia: Pada penelitian ini akan dikembangkan model gabungan pemasok-pembeli dengan permintaan probabilistik dan ukuran pengiriman sama. Pada model setiap lot pemesanan akan dikirim dalam beberapa lot pengiriman dan pemasok akan memproduksi barang dalam ukuran batch produksi yang merupakan kelipatan integer dari lot pengiriman. Dikembangkan pula suatu algoritma untuk menyelesaikan model matematis yang telah dibuat. Selain itu, pengaruh perubahan parameter terhadap perilaku model diteliti dengan analisis sensitivitas terhadap beberapa parameter kunci, seperti ukuran lot, stok pengaman dan total biaya persediaan. Pada penelitian ini juga dibuat model simulasi untuk melihat performansi model matematis pada kondisi nyata. Kata kunci: model gabungan, permintaan probabilistik, lot pengiriman, supply chain

  7. The finite horizon economic lot sizing problem in job shops : the multiple cycle approach

    NARCIS (Netherlands)

    Ouenniche, J.; Bertrand, J.W.M.

    2001-01-01

    This paper addresses the multi-product, finite horizon, static demand, sequencing, lot sizing and scheduling problem in a job shop environment where the planning horizon length is finite and fixed by management. The objective pursued is to minimize the sum of setup costs, and work-in-process and

  8. Sequencing, lot sizing and scheduling in job shops: the common cycle approach

    NARCIS (Netherlands)

    Ouenniche, J.; Boctor, F.F.

    1998-01-01

    This paper deals with the multi-product, finite horizon, static demand, sequencing, lot sizing and scheduling problem in a job shop environment where the objective is to minimize the sum of setup and inventory holding costs while satisfying the demand with no backlogging. To solve this problem, we

  9. Optimal Lot Sizing with Scrap and Random Breakdown Occurring in Backorder Replenishing Period

    OpenAIRE

    Ting, Chia-Kuan; Chiu, Yuan-Shyi; Chan, Chu-Chai

    2011-01-01

    This paper is concerned with determination of optimal lot size for an economic production quantity model with scrap and random breakdown occurring in backorder replenishing period. In most real-life manufacturing systems, generation of defective items and random breakdown of production equipment are inevitable. To deal with the stochastic machine failures, production planners practically calculate the mean time between failures (MTBF) and establish the robust plan accordingly, in terms of opt...

  10. Two parameter-tuned metaheuristic algorithms for the multi-level lot sizing and scheduling problem

    Directory of Open Access Journals (Sweden)

    S.M.T. Fatemi Ghomi

    2012-10-01

    Full Text Available This paper addresses the problem of lot sizing and scheduling problem for n-products and m-machines in flow shop environment where setups among machines are sequence-dependent and can be carried over. Many products must be produced under capacity constraints and allowing backorders. Since lot sizing and scheduling problems are well-known strongly NP-hard, much attention has been given to heuristics and metaheuristics methods. This paper presents two metaheuristics algorithms namely, Genetic Algorithm (GA and Imperialist Competitive Algorithm (ICA. Moreover, Taguchi robust design methodology is employed to calibrate the parameters of the algorithms for different size problems. In addition, the parameter-tuned algorithms are compared against a presented lower bound on randomly generated problems. At the end, comprehensive numerical examples are presented to demonstrate the effectiveness of the proposed algorithms. The results showed that the performance of both GA and ICA are very promising and ICA outperforms GA statistically.

  11. Optimal pricing and lot-sizing policies for an economic production quantity model with non-instantaneous deteriorating items, permissible delay in payments, customer returns, and inflation

    DEFF Research Database (Denmark)

    Ghoreishi, Maryam; Mirzazadeh, Abolfazl; Nakhai Kamalabadi, Isa

    2014-01-01

    . The effects of time value of money are studied using the Discounted Cash Flow approach. The main objective is to determine the optimal selling price, the optimal length of the production period, and the optimal length of inventory cycle simultaneously such that the present value of total profit is maximized...

  12. Optimal pricing and lot-sizing policies for an economic production quantity model with non-instantaneous deteriorating items, permissible delay in payments, customer returns, and inflation

    DEFF Research Database (Denmark)

    Ghoreishi, Maryam; Mirzazadeh, Abolfazl; Nakhai Kamalabadi, Isa

    2014-01-01

    . The effects of time value of money are studied using the Discounted Cash Flow approach. The main objective is to determine the optimal selling price, the optimal length of the production period, and the optimal length of inventory cycle simultaneously such that the present value of total profit is maximized....... An efficient algorithm is presented to find the optimal solution of the developed model. Finally, a numerical example is extracted to solve the presented inventory model using our proposed algorithm, and the effects of the customer returns, inflation, and delay in payments are also discussed....

  13. Changing the values of parameters on lot size reorder point model

    Directory of Open Access Journals (Sweden)

    Chang Hung-Chi

    2003-01-01

    Full Text Available The Just-In-Time (JIT philosophy has received a great deal of attention. Several actions such as improving quality, reducing setup cost and shortening lead time have been recognized as effective ways to achieve the underlying goal of JIT. This paper considers the partial backorders, lot size reorder point inventory system with an imperfect production process. The objective is to simultaneously optimize the lot size, reorder point, process quality, setup cost and lead time, constrained on a service level. We assume the explicit distributional form of lead time demand is unknown but the mean and standard deviation are given. The minimax distribution free approach is utilized to solve the problem and a numerical example is provided to illustrate the results. .

  14. Optimal pricing and lot sizing vendor managed inventory

    Directory of Open Access Journals (Sweden)

    Mohsen Ziaee

    2010-07-01

    Full Text Available Vendor Managed Inventory (VMI is one of the effective techniques for managing theinventory in supply chain. VMI models have been proven to reduce the cost of inventorycompared with traditional economic order quantity method under some conditions such asconstant demand and production expenditure. However, the modeling of the VMI problem hasnever been studied under some realistic assumptions such as price dependent demand. In thispaper, three problem formulations are proposed. In the first problem formulation, we study aVMI problem with one buyer and one supplier when demand is considered to be a function ofprice and price elasticity to demand, and production cost is also a function of demand. Theproposed model is formulated and solved in a form of geometric programming. For the secondand the third models, we consider VMI problem with two buyers and two suppliers assumingthat each buyer centre is relatively close to the other buyer centre. Each supplier has only oneproduct which is different from the product of the other supplier. Two suppliers cooperate incustomer relationship management and two buyers cooperate in supplier relationshipmanagement as well, so the suppliers send the orders of two buyers by one vehicle,simultaneously. For the third model, an additional assumption which is practically applicableand reasonable is considered. For all the proposed models, the optimal solution is comparedwith the traditional one. We demonstrate the implementation of our proposed models usingsome numerical examples.

  15. Solving a combined cutting-stock and lot-sizing problem with a column generating procedure

    DEFF Research Database (Denmark)

    Nonås, Sigrid Lise; Thorstenson, Anders

    2008-01-01

    In Nonås and Thorstenson [A combined cutting stock and lot sizing problem. European Journal of Operational Research 120(2) (2000) 327-42] a combined cutting-stock and lot-sizing problem is outlined under static and deterministic conditions. In this paper we suggest a new column generating solutio...... indicate that the procedure works well also for the extended cutting-stock problem with only a setup cost for each pattern change....

  16. A multi-phase algorithm for a joint lot-sizing and pricing problem with stochastic demands

    DEFF Research Database (Denmark)

    Jenny Li, Hongyan; Thorstenson, Anders

    2014-01-01

    to a practically viable approach to decision-making. In addition to incorporating market uncertainty and pricing decisions in the traditional production and inventory planning process, our approach also accommodates the complexity of time-varying cost and capacity constraints. Finally, our numerical results show......Stochastic lot-sizing problems have been addressed quite extensively, but relatively few studies also consider marketing factors, such as pricing. In this paper, we address a joint stochastic lot-sizing and pricing problem with capacity constraints and backlogging for a firm that produces a single...... that the multi-phase heuristic algorithm solves the example problems effectively....

  17. Optimal lot sizing in screening processes with returnable defective items

    Science.gov (United States)

    Vishkaei, Behzad Maleki; Niaki, S. T. A.; Farhangi, Milad; Rashti, Mehdi Ebrahimnezhad Moghadam

    2014-07-01

    This paper is an extension of Hsu and Hsu (Int J Ind Eng Comput 3(5):939-948, 2012) aiming to determine the optimal order quantity of product batches that contain defective items with percentage nonconforming following a known probability density function. The orders are subject to 100 % screening process at a rate higher than the demand rate. Shortage is backordered, and defective items in each ordering cycle are stored in a warehouse to be returned to the supplier when a new order is received. Although the retailer does not sell defective items at a lower price and only trades perfect items (to avoid loss), a higher holding cost incurs to store defective items. Using the renewal-reward theorem, the optimal order and shortage quantities are determined. Some numerical examples are solved at the end to clarify the applicability of the proposed model and to compare the new policy to an existing one. The results show that the new policy provides better expected profit per time.

  18. A joint economic lot-sizing problem with fuzzy demand, defective items and environmental impacts

    Science.gov (United States)

    Jauhari, W. A.; Laksono, P. W.

    2017-11-01

    In this paper, a joint economic lot-sizing problem consisting of a vendor and a buyer was proposed. A buyer ordered products from a vendor to fulfill end customer’s demand. A produced a batch of products, and delivered it to the buyer. The production process in the vendor was imperfect and produced a number of defective products. Production rate was assumed to be adjustable to control the output of vendor’s production. A continuous review policy was adopted by the buyer to manage his inventory level. In addition, an average annual demand was considered to be fuzzy rather than constant. The proposed model contributed to the current inventory literature by allowing the inclusion of fuzzy annual demand, imperfect production emission cost, and adjustable production rate. The proposed model also considered carbon emission cost which was resulted from the transportation activity. A mathematical model was developed for obtaining the optimal ordering quantity, safety factor and the number of deliveries so the joint total cost was minimized. Furthermore, an iterative procedure was suggested to determine the optimal solutions.

  19. 9 CFR 381.191 - Distribution of inspected products to small lot buyers.

    Science.gov (United States)

    2010-01-01

    ... small lot buyers. 381.191 Section 381.191 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE...; Exportation; or Sale of Poultry or Poultry Products § 381.191 Distribution of inspected products to small lot... small lot buyers (such as small restaurants), distributors or jobbers may remove inspected and passed...

  20. A hybrid adaptive large neighborhood search algorithm applied to a lot-sizing problem

    DEFF Research Database (Denmark)

    Muller, Laurent Flindt; Spoorendonk, Simon

    This paper presents a hybrid of a general heuristic framework that has been successfully applied to vehicle routing problems and a general purpose MIP solver. The framework uses local search and an adaptive procedure which choses between a set of large neighborhoods to be searched. A mixed integer...... of a solution and to investigate the feasibility of elements in such a neighborhood. The hybrid heuristic framework is applied to the multi-item capacitated lot sizing problem with dynamic lot sizes, where experiments have been conducted on a series of instances from the literature. On average the heuristic...

  1. Meta-Heuristics for Dynamic Lot Sizing: a review and comparison of solution approaches

    NARCIS (Netherlands)

    R.F. Jans (Raf); Z. Degraeve (Zeger)

    2004-01-01

    textabstractProofs from complexity theory as well as computational experiments indicate that most lot sizing problems are hard to solve. Because these problems are so difficult, various solution techniques have been proposed to solve them. In the past decade, meta-heuristics such as tabu search,

  2. Stochastic Lot-Sizing under Carbon Emission Control for Profit Optimisation in MTO Manufacturing

    Directory of Open Access Journals (Sweden)

    Qiao A.

    2017-01-01

    Full Text Available Aggravating global warming has heightened the imminent need by the world to step up forceful efforts on curbing emission of greenhouse gases. Although manufacturing is a major resource of carbon emission, few research works have studied the impacts of carbon constraints on manufacturing, leading to environmentally unsustainable production strategies and operations. This paper incorporates carbon emission management into production planning for make-to-order (MTO manufacturing. This paper proposes a model that solves lot-sizing problems to maximise profits under carbon emission caps. The model adopts stochastic interarrival times for customer orders to enhance the practicality of the results for real-world manufacturing. Numerical experiments show that reducing carbon emission undercuts short-term profits of a company. However, it is conducive to the company’s market image as being socially responsible which would attract more customers who concern about environmental protection. Hence, reducing carbon emission in manufacturing is beneficial to long-term profitability and sustainability. The results provide managerial insights into manufacture operations for balancing profitability and carbon control.

  3. A new approach for solving capacitated lot sizing and scheduling problem with sequence and period-dependent setup costs

    Directory of Open Access Journals (Sweden)

    Imen Chaieb Memmi

    2013-09-01

    Full Text Available Purpose: We aim to examine the capacitated multi-item lot sizing problem which is a typical example of a large bucket model, where many different items can be produced on the same machine in one time period. We propose a new approach to determine the production sequence and lot sizes that minimize the sum of start up and setup costs, inventory and production costs over all periods.Design/methodology/approach: The approach is composed of three steps. First, we compute a lower bound on total cost. Then we propose a three sub-steps iteration procedure. We solve optimally the lot sizing problem without considering products sequencing and their cost. Then, we determine products quantities to produce each period while minimizing the storage and variable production costs. Given the products to manufacture each period, we determine its correspondent optimal products sequencing, by using a Branch and Bound algorithm. Given the sequences of products within each period, we evaluate the total start up and setup cost. We compare then the total cost obtained to the lower bound of the total cost. If this value riches a prefixed value, we stop. Otherwise, we modify the results of lot sizing problem.Findings and Originality/value: We show using an illustrative example, that the difference between the total cost and its lower bound is only 10%. This gap depends on the significance of the inventory and production costs and the machine’s capacity. Comparing the approach we develop with a traditional one, we show that we manage to reduce the total cost by 30%.Research limitations/implications: Our model fits better to real-world situations where production systems run continuously. This model is applied for limited number of part types and periods.Practical implications: Our approach determines the products to manufacture each time period, their economic amounts, and their scheduling within each period. This outcome should help decision makers bearing expensive

  4. Solving lot-sizing problem with quantity discount and transportation cost

    Science.gov (United States)

    Lee, Amy H. I.; Kang, He-Yau; Lai, Chun-Mei

    2013-04-01

    Owing to today's increasingly competitive market and ever-changing manufacturing environment, the inventory problem is becoming more complicated to solve. The incorporation of heuristics methods has become a new trend to tackle the complex problem in the past decade. This article considers a lot-sizing problem, and the objective is to minimise total costs, where the costs include ordering, holding, purchase and transportation costs, under the requirement that no inventory shortage is allowed in the system. We first formulate the lot-sizing problem as a mixed integer programming (MIP) model. Next, an efficient genetic algorithm (GA) model is constructed for solving large-scale lot-sizing problems. An illustrative example with two cases in a touch panel manufacturer is used to illustrate the practicality of these models, and a sensitivity analysis is applied to understand the impact of the changes in parameters to the outcomes. The results demonstrate that both the MIP model and the GA model are effective and relatively accurate tools for determining the replenishment for touch panel manufacturing for multi-periods with quantity discount and batch transportation. The contributions of this article are to construct an MIP model to obtain an optimal solution when the problem is not too complicated itself and to present a GA model to find a near-optimal solution efficiently when the problem is complicated.

  5. Negotiation-based Order Lot-Sizing Approach for Two-tier Supply Chain

    Science.gov (United States)

    Chao, Yuan; Lin, Hao Wen; Chen, Xili; Murata, Tomohiro

    This paper focuses on a negotiation based collaborative planning process for the determination of order lot-size over multi-period planning, and confined to a two-tier supply chain scenario. The aim is to study how negotiation based planning processes would be used to refine locally preferred ordering patterns, which would consequently affect the overall performance of the supply chain in terms of costs and service level. Minimal information exchanges in the form of mathematical models are suggested to represent the local preferences and used to support the negotiation processes.

  6. Otimização no dimensionamento e seqüenciamento de lotes de produção: estudo de caso numa fábrica de rações Optimization in production lot sizing and sequencing: case study of an animal feed plan

    Directory of Open Access Journals (Sweden)

    Eli Angela Vitor Toso

    2005-08-01

    Full Text Available Neste trabalho, é proposta uma abordagem para otimizar o problema integrado de dimensionamento e seqüenciamento de lotes de produção em uma empresa do setor de nutrição animal. Tal problema consiste em decidir quanto produzir de cada produto em cada período, considerando a seqüência de produção dos lotes, de maneira a satisfazer a demanda e minimizar os custos de produção e estoques. Uma das grandes dificuldades para a programação da produção na empresa é integrar estas decisões, uma vez que os tempos de preparação (setup são bem dependentes da seqüência produtiva. O problema é modelado por programação linear inteira mista e resolvido por meio da linguagem de modelagem GAMS/CPLEX com alguns procedimentos para reduzir os tempos computacionais. Experimentos realizados com dados reais mostram que esta abordagem é capaz de gerar resultados melhores do que os utilizados pela empresa.This paper proposes an approach to optimize the problem of integrated production lot sizing and sequencing in an animal feed plant. The problem consists of deciding how much of each feed to produce in each period, considering lot sequencing, so as to meet the demand while minimizing production and inventory costs. One of the major difficulties of production scheduling in this plant is to coordinate these decisions, since setup times are highly dependent on lot sequencing. The problem is modeled by mixed integer linear programming and is solved using the modeling language GAMS/CPLEX. Numerical experiments carried out with real data indicate that this approach can produce better results than those used by the plant.

  7. An approach using Lagrangian/surrogate relaxation for lot-sizing with transportation costs

    Directory of Open Access Journals (Sweden)

    Flavio Molina

    2009-08-01

    Full Text Available The aim of this work was to study a distribution and lot-sizing problem that considers costs with transportation to a company warehouse as well as, inventory, production and setup costs. The logistic costs are associated with necessary containers to pack produced items. The company negotiates a long-term contract in which a fixed cost per period is associated with the transportation of the items. On the other hand, a limited number of containers are available with a lower cost than the average cost. If an occasional demand increase occurs, other containers can be utilized; however, their costs are higher. A mathematical model was proposed in the literature and solved using the Lagrangian heuristic. Here, the use of the Lagrangian/surrogate heuristic to solve the problem is evaluated. Moreover, an extension of the literature model is considered adding capacity constraints and allowing backlogging. Computational tests show that Lagrangian/surrogate heuristics are competitive, especially when the capacity constraints are tight.Neste trabalho estuda-se um problema de dimensionamento de lotes e distribuição que envolve além de custos de estoques, produção e preparação, custos de transportes para o armazém da empresa. Os custos logísticos estão associados aos contêineres necessários para empacotar os produtos produzidos. A empresa negocia um contrato de longo prazo onde um custo fixo por período é associado ao transporte dos itens, em contrapartida um limite de contêineres é disponibilizado com custo mais baixo que o custo padrão. Caso ocorra um aumento ocasional de demanda, novos contêineres podem ser utilizados, no entanto, seu custo é mais elevado. Um modelo matemático foi proposto na literatura e resolvido utilizando uma heurística Lagrangiana. No presente trabalho a resolução do problema por uma heurística Lagrangiana/surrogate é avaliada. Além disso, é considerada uma extensão do modelo da literatura adicionando

  8. Optimal pricing and lot-sizing decisions under Weibull distribution deterioration and trade credit policy

    Directory of Open Access Journals (Sweden)

    Manna S.K.

    2008-01-01

    Full Text Available In this paper, we consider the problem of simultaneous determination of retail price and lot-size (RPLS under the assumption that the supplier offers a fixed credit period to the retailer. It is assumed that the item in stock deteriorates over time at a rate that follows a two-parameter Weibull distribution and that the price-dependent demand is represented by a constant-price-elasticity function of retail price. The RPLS decision model is developed and solved analytically. Results are illustrated with the help of a base example. Computational results show that the supplier earns more profits when the credit period is greater than the replenishment cycle length. Sensitivity analysis of the solution to changes in the value of input parameters of the base example is also discussed.

  9. Note on "An efficient approach for solving the lot-sizing problem with time-varying storage capacities"

    NARCIS (Netherlands)

    W.J. van den Heuvel; J.M. Gutierrez (Jose Miguel); H.C. Hwang (Hark-Chin)

    2010-01-01

    textabstractIn a recent paper Gutiérrez et al. (2008) show that the lot-sizing problem with inventory bounds can be solved in O(T log T) time. In this note we show that their algorithm does not lead to an optimal solution in general.

  10. Note on "An efficient approach for solving the lot-sizing problem with time-varying storage capacities"

    NARCIS (Netherlands)

    W. van den Heuvel (Wilco); J.M. Gutierrez (Jose Miguel); H.C. Hwang (Hark-Chin)

    2011-01-01

    textabstractIn a recent paper Gutierrez et al. (2008) show that the lot-sizing problem with inventory bounds can be solved in O(T log T) time. In this note we show that their algorithm does not lead to an optimal solution in general.

  11. An efficient computational method for a stochastic dynamic lot-sizing problem under service-level constraints

    NARCIS (Netherlands)

    Tarim, S.A.; Ozen, U.; Dogru, M.K.; Rossi, R.

    2011-01-01

    We provide an efficient computational approach to solve the mixed integer programming (MIP) model developed by Tarim and Kingsman [8] for solving a stochastic lot-sizing problem with service level constraints under the static–dynamic uncertainty strategy. The effectiveness of the proposed method

  12. A software development for establishing optimal production lots and its application in academic and business environments

    Directory of Open Access Journals (Sweden)

    Javier Valencia Mendez

    2014-09-01

    Full Text Available The recent global economic downturn has increased an already perceived need in organizations for cost savings. To cope with such need, companies can opt for different strategies. This paper focuses on optimizing processes and, more specifically, determining the optimal lot production. To determine the optimal lot of a specific production process, a new software was developed that not only incorporates various productive and logistical elements in its calculations but also affords users a practical way to manage the large number of input parameters required to determine the optimal batch. The developed software has not only been validated by several companies, both Spanish and Mexican, who achieved significant savings, but also used as a teaching tool in universities with highly satisfactory results from the point of view of student learning. A special contribution of this work is that the developed tool can be sent to the interested reader free of charge upon request.

  13. INTEGRATION OF PRODUCTION AND SUPPLY IN THE LEAN MANUFACTURING CONDITIONS ACCORDING TO THE LOT FOR LOT METHOD LOGIC - RESULTS OF RESEARCH

    Directory of Open Access Journals (Sweden)

    Roman Domański

    2015-12-01

    Full Text Available Background: The review of literature and observations of business practice indicate that integration of production and supply is not a well-developed area of science. The author notes that the publications on the integration most often focus on selected detailed aspects and are rather postulative in character. This is accompanied by absence of specific utilitarian solutions (tools which could be used in business practice. Methods: The research was conducted between 2009 and 2010 in a company in Wielkopolska which operates in the machining sector. The solution of the research problem is based on the author's own concept - the integration model. The cost concept of the solution was built and verified (case study on the basis of conditions of a given enterprise (industrial data. Results: Partial verifiability of results was proved in the entire set of selected material indexes (although in two cases out of three the costs differences to the disadvantage of the lot-for-lot method were small. In case of structure of studied product range, a significant conformity of results in the order of 67% was achieved for items typically characteristic for the LfL method (group AX. Conclusions: The formulated research problem and the result of its solution (only 6 material items demand a lot (orthodoxy in terms of implementation conditions. The concept of the solution has a narrow field of application in the selected organizational conditions (studied enterprise. It should be verified by independent studies of this kind at other enterprises.

  14. Determining optimal selling price and lot size with process reliability and partial backlogging considerations

    Science.gov (United States)

    Hsieh, Tsu-Pang; Cheng, Mei-Chuan; Dye, Chung-Yuan; Ouyang, Liang-Yuh

    2011-01-01

    In this article, we extend the classical economic production quantity (EPQ) model by proposing imperfect production processes and quality-dependent unit production cost. The demand rate is described by any convex decreasing function of the selling price. In addition, we allow for shortages and a time-proportional backlogging rate. For any given selling price, we first prove that the optimal production schedule not only exists but also is unique. Next, we show that the total profit per unit time is a concave function of price when the production schedule is given. We then provide a simple algorithm to find the optimal selling price and production schedule for the proposed model. Finally, we use a couple of numerical examples to illustrate the algorithm and conclude this article with suggestions for possible future research.

  15. An optimal lot sizing and pricing in two echelon supply chain

    Directory of Open Access Journals (Sweden)

    Jafar Naeij

    2010-07-01

    Full Text Available This paper studies inventory and pricing policies in a non-cooperative supply chain with onesupplier and several retailers who are involved in producing, delivering and selling a singleproduct. We consider inventory policies in an information-asymmetric vendor managedinventory. The study consists of different scenarios where a supplier produces the product at thewholesale price to multiple retailers. The retailers also distribute the product in dispersed andindependent markets at retail selling prices. The demand rate for each market is a nondecreasingconcave function of the marketing expenditures of both local retailers and themanufacturer, but a non-increasing and convex function of the retail selling prices. The primarypurpose is to determine wholesale price, marketing expenditure for supplier and retailers,replenishment cycles for the product, and backorder quantity to maximize the total profit forboth groups of supplier and retailers. All scenarios are modeled as a Stackelberg game wherethe manufacturer is the leader and the retailers are the followers. A numerical study arepresented to demonstrate the influences of decision variables and/or parameters in variousscenarios.

  16. Remanufacturing lot-sizing under alternative perceptions of returned units' quality

    Directory of Open Access Journals (Sweden)

    Zikopoulos, C.

    2012-01-01

    Full Text Available One of the critical parameters in reverse supply chain management is the increased variability of the quality condition of used, returned products. The volatile nature of returns' quality often dictates the establishment of quality assessment procedures and the development of technologies that facilitate the fast, accurate and inexpensive classification of returns. The appropriate degree in which a firm has to allocate resources for acquiring information on the quality of returned units, naturally, depends on the anticipated improvement of recovery activities' profitability. Therefore, the quantification of the savings associated with confronting or resolving quality uncertainty is a necessary input during the determination of the proper recovery procedures' configuration. In the current paper, we study a remanufacturing system in a multi-period setting in which returns' quality information is exploited during remanufacturing planning. However, in the decision-making process, certain aspects of the problem examined, such as the quantification of shortage cost, are overlooked or simplified. The objective is to examine the advisability of acquiring advanced quality information in order to be used during sub-optimal decision-making processes, in comparison with alternative policies which do not take explicitly into account returns' quality information. Moreover, through an extensive numerical analysis we examine the implications of alternative considerations regarding returned units' quality on remanufacturing planning, lead-time and service-levels and evaluate their impact on the overall system operational cost.

  17. Testing the robustness of deterministic models of optimal dynamic pricing and lot-sizing for deteriorating items under stochastic conditions

    DEFF Research Database (Denmark)

    Ghoreishi, Maryam

    2018-01-01

    Many models within the field of optimal dynamic pricing and lot-sizing models for deteriorating items assume everything is deterministic and develop a differential equation as the core of analysis. Two prominent examples are the papers by Rajan et al. (Manag Sci 38:240–262, 1992) and Abad (Manag......, we will try to expose the model by Abad (1996) and Rajan et al. (1992) to stochastic inputs; however, designing these stochastic inputs such that they as closely as possible are aligned with the assumptions of those papers. We do our investigation through a numerical test where we test the robustness...... of the numerical results reported in Rajan et al. (1992) and Abad (1996) in a simulation model. Our numerical results seem to confirm that the results stated in these papers are indeed robust when being imposed to stochastic inputs....

  18. Joint Economic Lot Sizing Optimization in a Supplier-Buyer Inventory System When the Supplier Offers Decremental Temporary Discounts

    Directory of Open Access Journals (Sweden)

    Diana Puspita Sari

    2012-02-01

    Full Text Available This research discusses mathematical models of joint economic lot size optimization in a supplier-buyer inventory system in a situation when the supplier offers decremental temporary discounts during a sale period. Here, the sale period consists of n phases and the phases of discounts offered descend as much as the number of phases. The highest discount will be given when orders are placed in the first phase while the lowest one will be given when they are placed in the last phase. In this situation, the supplier attempts to attract the buyer to place orders as early as possible during the sale period. The buyers will respon these offers by ordering a special quantity in one of the phase. In this paper, we propose such a forward buying model with discount-proportionally-distributed time phases. To examine the behaviour of the proposed model, we conducted numerical experiments. We assumed that there are three phases of discounts during the sale period. We then compared the total joint costs of special order placed in each phase for two scenarios. The first scenario is the case of independent situation – there is no coordination between the buyer and the supplie-, while the second scenario is the opposite one, the coordinated model. Our results showed the coordinated model outperform the independent model in terms of producing total joint costs. We finally conducted a sensitivity analyzis to examine the other behaviour of the proposed model. Keywords: supplier-buyer inventory system, forward buying model, decremental temporary discounts, joint economic lot sizing, optimization.

  19. The effect of clustering on lot quality assurance sampling: a probabilistic model to calculate sample sizes for quality assessments.

    Science.gov (United States)

    Hedt-Gauthier, Bethany L; Mitsunaga, Tisha; Hund, Lauren; Olives, Casey; Pagano, Marcello

    2013-10-26

    Traditional Lot Quality Assurance Sampling (LQAS) designs assume observations are collected using simple random sampling. Alternatively, randomly sampling clusters of observations and then individuals within clusters reduces costs but decreases the precision of the classifications. In this paper, we develop a general framework for designing the cluster(C)-LQAS system and illustrate the method with the design of data quality assessments for the community health worker program in Rwanda. To determine sample size and decision rules for C-LQAS, we use the beta-binomial distribution to account for inflated risk of errors introduced by sampling clusters at the first stage. We present general theory and code for sample size calculations.The C-LQAS sample sizes provided in this paper constrain misclassification risks below user-specified limits. Multiple C-LQAS systems meet the specified risk requirements, but numerous considerations, including per-cluster versus per-individual sampling costs, help identify optimal systems for distinct applications. We show the utility of C-LQAS for data quality assessments, but the method generalizes to numerous applications. This paper provides the necessary technical detail and supplemental code to support the design of C-LQAS for specific programs.

  20. Size, productivity, and international banking

    NARCIS (Netherlands)

    Buch, Claudia M.; Koch, Catherine T.; Koetter, Michael

    Heterogeneity in size and productivity is central to models that explain which manufacturing firms expert. This study presents descriptive evidence on similar heterogeneity among international banks as financial services providers. A novel and detailed bank-level data set reveals the volume and mode

  1. A comparison of particle swarm optimizations for uncapacitated multilevel lot-sizin problems

    NARCIS (Netherlands)

    Han, Y.; Kaku, I.; Tang, J.; Dellaert, N.P.; Cai, J.; Li, Y.

    2010-01-01

    The multilevel lot-sizing (MLLS) problem is a key production planning problem in the material requirement planning (MRP) system. The MLLS problem deals with determining the production lot sizes of various items appearing in the product structure over a given finite planning horizon to minimize the

  2. EVALUASI KEBIJAKAN STRATEGI BISNIS MENGGUNAKAN MODEL JOINT ECONOMIC LOT SIZE (JELS DENGAN PERMINTAAN PROBABILISTIK (Studi Kasus di PT. Semarang Autocomp Manufacturing Indonesia

    Directory of Open Access Journals (Sweden)

    Ary Arvianto

    2012-02-01

    Full Text Available Persaingan di dunia bisnis dewasa ini tidak lagi antar perusahaan melainkan antar supply chain. PT.SAMI merupakan perusahaan yang memproduksi wiring harness yaitu suatu komponen kendaraan pengantar arus listrik dari satu bagian ke bagian lain. PT.SAMI memproduksi banyak item wirring harness untuk beberapa merek mobil yaitu Holden, Lambda, Mazda, Nissan dan Honda. Dalam menjalankan proses bisnisnya PT.SAMI mendapat pesanan dari distributor suatu  merek mobil. Tetapi masalah yang timbul sering terjadinya revisi order yaitu perubahan jumlah pemesanan oleh distributor (PT. PASI  kepada vendor sekaligus manufaktur  (PT. SAMI dalam satu periode pemesanan, sehingga dapat menyebabkan overstock maupun stockout yang menyebabkan biaya persediaan menjadi meningkat. Revisi order  akan terus terjadi mengingat perjanjian antara PT.SAMI dan distributornya dalam kasus ini adalah PT. PASI  tetap sama. Oleh karena itu perlu adanya evaluasi terhadap kebijakan proses bisnis yang dilakukan, salah satunya dengan menggunakan pendekatan model Joint Economic Lot Size (JELS. Dengan model integrasi ini diharapkan dapat mereduksi biaya persediaan gabungan  karena mencari titik optimal berdasarkan fungsi biaya kedua belah pihak. Dengan menggunakan model JELS total biaya persediaan gabungan dapat direduksi karena biaya yang timbul merupakan biaya paling kecil berdasarkan lot pengiriman (q yang optimal. Begitu juga dengan biaya persediaan di PT.SAMI dan PT.PASI  di dapat biaya yang jauh lebih rendah dibandingkan dengan melakukan pengelolaan persediaan secara konvensional. Kata kunci:  joint, lot size,  integrasi, supply chain       Competition in today's business world is no longer between companies but between supply chain. PT.SAMI is a manufacturer of wiring harness for  vehicle. PT.SAMI produces many items wirring harness for several brands such as  Holden, Lambda, Mazda, Nissan and Honda. In conducting its business process PT.SAMI get an order from a

  3. Pricing and lot sizing optimization in a two-echelon supply chain with a constrained Logit demand function

    Directory of Open Access Journals (Sweden)

    Yeison Díaz-Mateus

    2017-07-01

    Full Text Available Decision making in supply chains is influenced by demand variations, and hence sales, purchase orders and inventory levels are therefore concerned. This paper presents a non-linear optimization model for a two-echelon supply chain, for a unique product. In addition, the model includes the consumers’ maximum willingness to pay, taking socioeconomic differences into account. To do so, the constrained multinomial logit for discrete choices is used to estimate demand levels. Then, a metaheuristic approach based on particle swarm optimization is proposed to determine the optimal product sales price and inventory coordination variables. To validate the proposed model, a supply chain of a technological product was chosen and three scenarios are analyzed: discounts, demand segmentation and demand overestimation. Results are analyzed on the basis of profits, lotsizing and inventory turnover and market share. It can be concluded that the maximum willingness to pay must be taken into consideration, otherwise fictitious profits may mislead decision making, and although the market share would seem to improve, overall profits are not in fact necessarily better.

  4. Optimal pricing and lot-sizing for perishable inventory with price and time dependent ramp-type demand

    Science.gov (United States)

    Panda, S.; Saha, S.; Basu, M.

    2013-01-01

    Product perishability is an important aspect of inventory control. To minimise the effect of deterioration, retailers in supermarkets, departmental store managers, etc. always want higher inventory depletion rate. In this article, we propose a dynamic pre- and post-deterioration cumulative discount policy to enhance inventory depletion rate resulting low volume of deterioration cost, holding cost and hence higher profit. It is assumed that demand is a price and time dependent ramp-type function and the product starts to deteriorate after certain amount of time. Unlike the conventional inventory models with pricing strategies, which are restricted to a fixed number of price changes and to a fixed cycle length, we allow the number of price changes before as well as after the start of deterioration and the replenishment cycle length to be the decision variables. Before start of deterioration, discounts on unit selling price are provided cumulatively in successive pricing cycles. After the start of deterioration, discounts on reduced unit selling price are also provided in a cumulative way. A mathematical model is developed and the existence of the optimal solution is verified. A numerical example is presented, which indicates that under the cumulative effect of price discounting, dynamic pricing policy outperforms static pricing strategy. Sensitivity analysis of the model is carried out.

  5. Joint optimization of condition-based maintenance and production lot-sizing

    NARCIS (Netherlands)

    Peng, H.; van Houtum, G.J.J.A.N.

    2016-01-01

    Due to the development of sensor technologies nowadays, condition-based maintenance (CBM) programs can be established and optimized based on the data collected through condition monitoring. The CBM activities can significantly increase the uptime of a machine. However, they should be conducted in a

  6. Good Manufacturing Practice-Compliant Production and Lot-Release of Ex Vivo Expanded Regulatory T Cells As Basis for Treatment of Patients with Autoimmune and Inflammatory Disorders

    Directory of Open Access Journals (Sweden)

    Manuel Wiesinger

    2017-10-01

    Full Text Available In recent years, the exploration of regulatory T cell (Treg-based cellular therapy has become an attractive strategy to ameliorate inflammation and autoimmunity in various clinical settings. The main obstacle to the clinical application of Treg in human is their low number circulating in peripheral blood. Therefore, ex vivo expansion is inevitable. Moreover, isolation of Treg bears the risk of concurrent isolation of unwanted effector cells, which may trigger or deteriorate inflammation upon adoptive Treg transfer. Here, we present a protocol for the GMP-compliant production, lot-release and validation of ex vivo expanded Tregs for treatment of patients with autoimmune and inflammatory disorders. In the presented production protocol, large numbers of Treg, previously enriched from a leukapheresis product by using the CliniMACS® system, are ex vivo expanded in the presence of anti-CD3/anti-CD28 expander beads, exogenous IL-2 and rapamycin during 21 days. The expanded Treg drug product passed predefined lot-release criteria. These criteria include (i sterility testing, (ii assessment of Treg phenotype, (iii assessment of non-Treg cellular impurities, (iv confirmation of successful anti-CD3/anti-CD28 expander bead removal after expansion, and (v confirmation of the biological function of the Treg product. Furthermore, the Treg drug product was shown to retain its stability and suppressive function for at least 1 year after freezing and thawing. Also, dilution of the Treg drug product in 0.9% physiological saline did not affect Treg phenotype and Treg function for up to 90 min. These data indicate that these cells are ready to use in a clinical setting in which a cell infusion time of up to 90 min can be expected. The presented production process has recently undergone on site GMP-conform evaluation and received GMP certification from the Bavarian authorities in Germany. This protocol can now be used for Treg-based therapy of various

  7. Better Size Estimation for Sparse Matrix Products

    DEFF Research Database (Denmark)

    Amossen, Rasmus Resen; Campagna, Andrea; Pagh, Rasmus

    2010-01-01

    We consider the problem of doing fast and reliable estimation of the number of non-zero entries in a sparse Boolean matrix product. Let n denote the total number of non-zero entries in the input matrices. We show how to compute a 1 ± ε approximation (with small probability of error) in expected t...

  8. The use of knowledge-based Genetic Algorithm for starting time optimisation in a lot-bucket MRP

    Science.gov (United States)

    Ridwan, Muhammad; Purnomo, Andi

    2016-01-01

    In production planning, Material Requirement Planning (MRP) is usually developed based on time-bucket system, a period in the MRP is representing the time and usually weekly. MRP has been successfully implemented in Make To Stock (MTS) manufacturing, where production activity must be started before customer demand is received. However, to be implemented successfully in Make To Order (MTO) manufacturing, a modification is required on the conventional MRP in order to make it in line with the real situation. In MTO manufacturing, delivery schedule to the customers is defined strictly and must be fulfilled in order to increase customer satisfaction. On the other hand, company prefers to keep constant number of workers, hence production lot size should be constant as well. Since a bucket in conventional MRP system is representing time and usually weekly, hence, strict delivery schedule could not be accommodated. Fortunately, there is a modified time-bucket MRP system, called as lot-bucket MRP system that proposed by Casimir in 1999. In the lot-bucket MRP system, a bucket is representing a lot, and the lot size is preferably constant. The time to finish every lot could be varying depends on due date of lot. Starting time of a lot must be determined so that every lot has reasonable production time. So far there is no formal method to determine optimum starting time in the lot-bucket MRP system. Trial and error process usually used for it but some time, it causes several lots have very short production time and the lot-bucket MRP would be infeasible to be executed. This paper presents the use of Genetic Algorithm (GA) for optimisation of starting time in a lot-bucket MRP system. Even though GA is well known as powerful searching algorithm, however, improvement is still required in order to increase possibility of GA in finding optimum solution in shorter time. A knowledge-based system has been embedded in the proposed GA as the improvement effort, and it is proven that the

  9. Exploring lot-to-lot variation in spoilage bacterial communities on commercial modified atmosphere packaged beef.

    Science.gov (United States)

    Säde, Elina; Penttinen, Katri; Björkroth, Johanna; Hultman, Jenni

    2017-04-01

    Understanding the factors influencing meat bacterial communities is important as these communities are largely responsible for meat spoilage. The composition and structure of a bacterial community on a high-O 2 modified-atmosphere packaged beef product were examined after packaging, on the use-by date and two days after, to determine whether the communities at each stage were similar to those in samples taken from different production lots. Furthermore, we examined whether the taxa associated with product spoilage were distributed across production lots. Results from 16S rRNA amplicon sequencing showed that while the early samples harbored distinct bacterial communities, after 8-12 days storage at 6 °C the communities were similar to those in samples from different lots, comprising mainly of common meat spoilage bacteria Carnobacterium spp., Brochothrix spp., Leuconostoc spp. and Lactococcus spp. Interestingly, abundant operational taxonomic units associated with product spoilage were shared between the production lots, suggesting that the bacteria enable to spoil the product were constant contaminants in the production chain. A characteristic succession pattern and the distribution of common spoilage bacteria between lots suggest that both the packaging type and the initial community structure influenced the development of the spoilage bacterial community. Copyright © 2016 Elsevier Ltd. All rights reserved.

  10. Comparison of Firefly algorithm and Artificial Immune System algorithm for lot streaming in -machine flow shop scheduling

    Directory of Open Access Journals (Sweden)

    G. Vijay Chakaravarthy

    2012-11-01

    Full Text Available Lot streaming is a technique used to split the processing of lots into several sublots (transfer batches to allow the overlapping of operations in a multistage manufacturing systems thereby shortening the production time (makespan. The objective of this paper is to minimize the makespan and total flow time of -job, -machine lot streaming problem in a flow shop with equal and variable size sublots and also to determine the optimal sublot size. In recent times researchers are concentrating and applying intelligent heuristics to solve flow shop problems with lot streaming. In this research, Firefly Algorithm (FA and Artificial Immune System (AIS algorithms are used to solve the problem. The results obtained by the proposed algorithms are also compared with the performance of other worked out traditional heuristics. The computational results shows that the identified algorithms are more efficient, effective and better than the algorithms already tested for this problem.

  11. Farm size - productivity relationships among arable crops farmers ...

    African Journals Online (AJOL)

    The study was designed to analyze the relationship between farm size and resource productivity among arable crop farmers in Imo state, and isolate the major determinants of agricultural productivity. Data used for the study were collected from a sample of 120 farmers randomly selected from Okigwe and Orlu agricultural ...

  12. Effect of limestone particle size on egg production and eggshell ...

    African Journals Online (AJOL)

    Different limestone particle sizes had no effect on any of the tested egg production and eggshell quality parameters. These results suggested that larger particles limestone are not necessarily essential to provide sufficient Ca2+ to laying hens for egg production and eggshell quality at end-of-lay, provided that the dietary Ca ...

  13. Particle size distribution of selected electronic nicotine delivery system products.

    Science.gov (United States)

    Oldham, Michael J; Zhang, Jingjie; Rusyniak, Mark J; Kane, David B; Gardner, William P

    2018-03-01

    Dosimetry models can be used to predict the dose of inhaled material, but they require several parameters including particle size distribution. The reported particle size distributions for aerosols from electronic nicotine delivery system (ENDS) products vary widely and don't always identify a specific product. A low-flow cascade impactor was used to determine the particle size distribution [mass median aerodynamic diameter (MMAD); geometric standard deviation (GSD)] from 20 different cartridge based ENDS products. To assess losses and vapor phase amount, collection efficiency of the system was measured by comparing the collected mass in the impactor to the difference in ENDS product mass. The levels of nicotine, glycerin, propylene glycol, water, and menthol in the formulations of each product were also measured. Regardless of the ENDS product formulation, the MMAD of all tested products was similar and ranged from 0.9 to 1.2 μm with a GSD ranging from 1.7 to 2.2. There was no consistent pattern of change in the MMAD and GSD as a function of number of puffs (cartridge life). The collection efficiency indicated that 9%-26% of the generated mass was deposited in the collection system or was in the vapor phase. The particle size distribution data are suitable for use in aerosol dosimetry programs. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  14. Optimizing Greenhouse Rice Production: What Is the Best Pot Size?

    OpenAIRE

    Eddy, Robert; Acosta, Kevin; Liu, Yisi; Russell, Michael

    2016-01-01

    This publication describes our studies to determine the best pot size to optimize greenhouse rice production. We recommend 9-cm (4-inch) diameter square pot. Pots as small as 7-cm diameter yielded seed. This version is updated to include observations of larger pots with multiple plants. Photos of the plants growing under differing pot sizes are provided. This document is one entry in a series of questions and answers originally posted to the Purdue University Department of Horticulture & L...

  15. High-voltage leak detection of a parenteral proteinaceous solution product packaged in form-fill-seal plastic laminate bags. Part 2. Method performance as a function of heat seal defects, product-package refrigeration, and package plastic laminate lot.

    Science.gov (United States)

    Rasmussen, Mats; Damgaard, Rasmus; Buus, Peter; Mulhall, Brian; Guazzo, Dana Morton

    2013-01-01

    Part 1 of this three-part research series detailed the development and validation of a high-voltage leak detection test (HVLD, also known as an electrical conductivity and capacitance test) for verifying the container-closure integrity of a small-volume laminate plastic bag containing an aqueous solution formulation of the rapid-acting insulin analogue, insulin aspart (NovoRapid®/NovoLog®) by Novo Nordisk A/S, Bagsværd, Denmark. Leak detection capability was verified using positive controls each with a single laser-drilled hole in the bag film face. In this Part 2, HVLD leak detection capability was further explored in four separate studies. Study 1 investigated the ability of HVLD to detect weaknesses and/or gaps in the bag heat seal. Study 2 checked the HVLD detection of bag holes in packages stored 4 days at ambient conditions followed by 17 days at refrigeration. Study 3 examined HVLD test results for packages tested when cold. Study 4 compared HVLD test results as a function of bag plastic film lots. The final Part 3 of this series will report the impact of HVLD exposure on product visual appearance and chemical stability. In Part 1 of this three-part series, a leak test method based on electrical conductivity and capacitance, also called high-voltage leak detection (HVLD), was used to find leaks in small plastic bags filled with a solution for injection of the rapid-acting insulin analogue, insulin aspart (NovoRapid®/NovoLog®) by Novo Nordisk A/S, Bagsværd, Denmark. In this Part 2, HVLD leak detection capability was further explored in four separate studies. Study 1 investigated the ability of HVLD to detect bag heat seal leaks. Study 2 checked HVLD's ability to detect bag holes after a total of 21 days at ambient plus refrigerated temperatures. Study 3 looked to see if HVLD results changed for packages tested when still cold. Study 4 compared HVLD results for multiple bag plastic film lots. The final Part 3 of this series will report any evidence of

  16. Automatic milking systems, farm size, and milk production.

    Science.gov (United States)

    Rotz, C A; Coiner, C U; Soder, K J

    2003-12-01

    Automatic milking systems (AMS) offer relief from the demanding routine of milking. Although many AMS are in use in Europe and a few are used in the United States, the potential benefit for American farms is uncertain. A farm-simulation model was used to determine the long-term, whole-farm effect of implementing AMS on farm sizes of 30 to 270 cows. Highest farm net return to management and unpaid factors was when AMS were used at maximal milking capacity. Adding stalls to increase milking frequency and possibly increase production generally did not improve net return. Compared with new traditional milking systems, the greatest potential economic benefit was a single-stall AMS on a farm size of 60 cows at a moderate milk production level (8600 kg/cow). On other farm sizes using single-stall type robotic units, losses in annual net return of 0 dollars to 300 dollars/cow were projected, with the greatest losses on larger farms and at high milk production (10,900 kg/cow). Systems with one robot serving multiple stalls provided a greater net return than single-stall systems, and this net return was competitive with traditional parlors for 50- to 130-cow farm sizes. The potential benefit of AMS was improved by 100 dollars/cow per year if the AMS increased production an additional 5%. A 20% reduction in initial equipment cost or doubling milking labor cost also improved annual net return of an AMS by up to 100 dollars/cow. Annual net return was reduced by 110 dollars/cow, though, if the economic life of the AMS was reduced by 3 yr for a more rapid depreciation than that normally used with traditional milking systems. Thus, under current assumptions, the economic return for an AMS was similar to that of new parlor systems on smaller farms when the milking capacity of the AMS was well matched to herd size and milk production level.

  17. Efeito da redução do tamanho de lote e de programas de Melhoria Contínua no Estoque em Processo (WIP e na Utilização: estudo utilizando uma abordagem híbrida System Dynamics - Factory Physics Effect of lot size reduction and Continuous Improvement on Work In Process and Utilization: study using a combined System Dynamics and Factory Physics approach

    Directory of Open Access Journals (Sweden)

    Moacir Godinho Filho

    2009-04-01

    Full Text Available O presente trabalho apresenta um modelo quantitativo que utiliza de forma híbrida as abordagens System Dynamics - SD (FORRESTER, 1962 e Factory Physics (HOPP; SPEARMAN, 2001 objetivando estudar o efeito conjunto de seis programas de Melhoria Contínua - CI (variabilidade na taxa de chegada, variabilidade do processo, qualidade, tempo até a falha, tempo de reparo e tempo de set up e de redução de tamanhos de lote de produção nos níveis médios de Estoque em Processo (WIP e Utilização em um ambiente produtivo com uma única máquina que processa múltiplos produtos. Os resultados dos experimentos realizados utilizando-se o modelo desenvolvido fornecem insights e subsídios que dão suporte a uma série de modernas ferramentas e filosofias de gestão da manufatura, tais como programas de redução da variabilidade do processo como, por exemplo, Seis Sigma; programas de redução de set up, como por exemplo os programas SMED (Single Minute Exchange of Die, Sistema Toyota de Produção/Manufatura Enxuta e Quick Response Manufacturing (QRM. Além disso, o modelo também serve para auxiliar na escolha de diferentes possibilidades de programas de Melhoria Contínua no chão de fábrica.This paper builds a quantitative model, which is a result of a combination of System Dynamics (FORRESTER, 1962 and Factory Physics (HOPP; SPEARMAN, 2001 approaches aiming to examine how six Continuous Improvement (CI programs (arrival variability, process variability, quality (defect rate, time to failure, repair time, and set up time, together with lot size reduction, affect Work In Process (WIP and Utilization in a multi-product, single-machine environment. Results of the paper provides support for: i the importance of implementing set up reduction programs; ii Lean Manufacturing (LM philosophy regarding the implementation of small CI programs in a lot of variables and areas of the shop floor; iii Quick Response Manufacturing (QRM philosophy regarding the

  18. Production, depreciation and the size distribution of firms

    Science.gov (United States)

    Ma, Qi; Chen, Yongwang; Tong, Hui; Di, Zengru

    2008-05-01

    Many empirical researches indicate that firm size distributions in different industries or countries exhibit some similar characters. Among them the fact that many firm size distributions obey power-law especially for the upper end has been mostly discussed. Here we present an agent-based model to describe the evolution of manufacturing firms. Some basic economic behaviors are taken into account, which are production with decreasing marginal returns, preferential allocation of investments, and stochastic depreciation. The model gives a steady size distribution of firms which obey power-law. The effect of parameters on the power exponent is analyzed. The theoretical results are given based on both the Fokker-Planck equation and the Kesten process. They are well consistent with the numerical results.

  19. Size characterization of metal oxide nanoparticles in commercial sunscreen products

    Science.gov (United States)

    Bairi, Venu Gopal; Lim, Jin-Hee; Fong, Andrew; Linder, Sean W.

    2017-07-01

    There is an increase in the usage of engineered metal oxide (TiO2 and ZnO) nanoparticles in commercial sunscreens due to their pleasing esthetics and greater sun protection efficiency. A number of studies have been done concerning the safety of nanoparticles in sunscreen products. In order to do the safety assessment, it is pertinent to develop novel analytical techniques to analyze these nanoparticles in commercial sunscreens. This study is focused on developing analytical techniques that can efficiently determine particle size of metal oxides present in the commercial sunscreens. To isolate the mineral UV filters from the organic matrices, specific procedures such as solvent extraction were identified. In addition, several solvents (hexane, chloroform, dichloromethane, and tetrahydrofuran) have been investigated. The solvent extraction using tetrahydrofuran worked well for all the samples investigated. The isolated nanoparticles were characterized by using several different techniques such as transmission electron microscopy, scanning electron microscopy, dynamic light scattering, differential centrifugal sedimentation, and x-ray diffraction. Elemental analysis mapping studies were performed to obtain individual chemical and morphological identities of the nanoparticles. Results from the electron microscopy techniques were compared against the bulk particle sizing techniques. All of the sunscreen products tested in this study were found to contain nanosized (≤100 nm) metal oxide particles with varied shapes and aspect ratios, and four among the 11 products were showed to have anatase TiO2.

  20. Estudo do efeito de programas de melhoria contínua em variáveis do chão de fábrica na relação entre tamanho de lote de produção e lead time: lead time relationship Study of the effect of continuous improvement programs on lot size

    Directory of Open Access Journals (Sweden)

    Moacir Godinho Filho

    2010-01-01

    variables on the shop floor, aiming to increase the manager’s intuition about manufacturing dynamics. One of these is the relationship between lot size and average lead time, which is studied in this paper. Although this general relationship is widely recognized, only a selected number of authors address this relationship in a practical manner. This paper presenta and compares the effect of six continuous improvement programs (arrival variability, process variability, quality (defect rate, time to failure, repair time, and set up time on lot size × lead time relationship in a multi-product, single-machine environment, by means of a combination of System Dynamics (FORRESTER, 1962 and Factory Physics (HOPP and SPEARMAN, 2008 approaches. Two sets of experiments are performed in this paper: a A large (50% improvement in each parameter separately, as might be obtained by a significant one-time investment; b a small improvement in all parameters simultaneously. The results showed: (a the positive effect of continuous improvement in shop floor variables on lead time ; (b the importance of knowing the lot size × lead time curve and the effect of set up reduction programs before beginning with lot size reduction program; (c that investing in small improvements in several variables is preferable regarding lead time than investing in a large improvement in just one variable; (d some insights about modern manufacturing management paradigms such as: Lean Manufacturing and Quick Response Manufacturing.

  1. New methodology for dynamic lot dispatching

    Science.gov (United States)

    Tai, Wei-Herng; Wang, Jiann-Kwang; Lin, Kuo-Cheng; Hsu, Yi-Chin

    1994-09-01

    This paper presents a new dynamic dispatching rule to improve delivery. The dynamic dispatching rule named `SLACK and OTD (on time delivery)' is developed for focusing on due date and target cycle time under the environment of IC manufacturing. This idea uses traditional SLACK policy to control long term due date and new OTD policy to reflect the short term stage queue time. Through the fuzzy theory, these two policies are combined as the dispatching controller to define the lot priority in the entire production line. Besides, the system would automatically update the lot priority according to the current line situation. Since the wafer dispatching used to be controlled by critical ratio that indicates the low customer satisfaction. And the overall slack time in the front end of the process is greater compared to that in the rear end of the process which reveals that the machines in the rear end are overloaded by rush orders. When SLACK and OTD are used the due date control has been gradually improved. The wafer with either a long stage queue time or urgent due date will be pushed through the overall production line instead of jammed in the front end. A demand pull system is also developed to satisfy not only due date but also the quantity of monthly demand. The SLACK and OTD rule has been implemented in Taiwan Semiconductor Manufacturing Company for eight months with beneficial results. In order to clearly monitor the SLACK and OTD policy, a method called box chart is generated to simulate the entire production system. From the box chart, we can not only monitor the result of decision policy but display the production situation on the density figure. The production cycle time and delivery situation can also be investigated.

  2. Nano-sized crystalline drug production by milling technology.

    Science.gov (United States)

    Moribe, Kunikazu; Ueda, Keisuke; Limwikrant, Waree; Higashi, Kenjirou; Yamamoto, Keiji

    2013-01-01

    Nano-formulation of poorly water-soluble drugs has been developed to enhance drug dissolution. In this review, we introduce nano-milling technology described in recently published papers. Factors affecting the size of drug crystals are compared based on the preparation methods and drug and excipient types. A top-down approach using the comminution process is a method conventionally used to prepare crystalline drug nanoparticles. Wet milling using media is well studied and several wet-milled drug formulations are now on the market. Several trials on drug nanosuspension preparation using different apparatuses, materials, and conditions have been reported. Wet milling using a high-pressure homogenizer is another alternative to preparing production-scale drug nanosuspensions. Dry milling is a simple method of preparing a solid-state drug nano-formulation. The effect of size on the dissolution of a drug from nanoparticles is an area of fundamental research, but it is sometimes incorrectly evaluated. Here, we discuss evaluation procedures and the associated problems. Lastly, the importance of quality control, process optimization, and physicochemical characterization are briefly discussed.

  3. Production of stocker-size hybrid tilapia in an outdoor biofloc production system

    Science.gov (United States)

    Production efficiency per unit volume of water can be improved when stocking rate is adjusted to allow rapid growth of the culture organism to the desired target weight. Fingerlings often are grown to stocker size (ca. 100-150 g/fish) at high stocking rates and then the population is thinned to allo...

  4. Nano size Aerosols of Radon Decay Products in Various Environments

    International Nuclear Information System (INIS)

    Vaupotic, J.

    2008-01-01

    The radioactive noble gas radon (222Rn, alpha decay, t 1/2 = 3.82 days) is always accompanied by its short-lived decay products (RnDP): 218Po (alpha decay, t 1/2 = 3.10 min), 214Pb (beta/gamma decay, t 1/2 = 26.8 min), 214Bi (beta/gamma decay, t 1/2 = 19.9 min), and 214Po (alpha decay, t 1/2 = 164 μs). In indoor and outdoor air, they appear as unattached RnDP in the form of clusters in the size range 0.5-3 nm and as attached RnDP between 200 and 800 nm. Because of plate-out of aerosols on the walls and floor of a room, as well as air movement and entry of fresh air, radioactive equilibrium between RnDP and Rn in indoor air is only partly achieved and is expressed as a fraction between 0 and 1, called the equilibrium factor, F. Birchall and James elaborated a dosimetric approach to calculate the dose conversion factor, DCF D , based on f un . In this paper, the results of our studies on fun in 29 rooms of kindergartens and 26 rooms of elementary and high schools, at the lowest point and the railway station in the Postojna Cave, and in 4 rooms in wineries in Slovenia are reported, and DCF D values based on the Porstendorfer formulae are discussed and compared with the DCF E value recommended by ICRP-65

  5. 7 CFR 46.20 - Lot numbers.

    Science.gov (United States)

    2010-01-01

    ... and entered on all sales tickets identifying and segregating the sales from the various shipments on hand. The lot number shall be entered on the sales tickets by the salesmen at the time of sale or by the produce dispatcher, and not by bookkeepers or others after the sales have been made. No lot number...

  6. Production of sized particles of uranium oxides and uranium oxyfluorides

    International Nuclear Information System (INIS)

    Knudsen, I.E.; Randall, C.C.

    1976-01-01

    A process is claimed for converting uranium hexafluoride (UF 6 ) to uranium dioxide (UO 2 ) of a relatively large particle size in a fluidized bed reactor by mixing uranium hexafluoride with a mixture of steam and hydrogen and by preliminary reacting in an ejector gaseous uranium hexafluoride with steam and hydrogen to form a mixture of uranium and oxide and uranium oxyfluoride seed particles of varying sizes, separating the larger particles from the smaller particles in a cyclone separator, recycling the smaller seed particles through the ejector to increase their size, and introducing the larger seed particles from the cyclone separator into a fluidized bed reactor where the seed particles serve as nuclei on which coarser particles of uranium dioxide are formed. 9 claims, 2 drawing figures

  7. A Hybrid Algorithm for Solving the Economic Lot and Delivery Scheduling Problem in the Common Cycle Case

    DEFF Research Database (Denmark)

    Ju, Suquan; Clausen, Jens

    2004-01-01

    The ELDSP problem is a combined lot sizing and sequencing problem. A supplier produces and delivers components of different component types to a consumer in batches. The task is to determine the cycle time, i.e. that time between deliveries, which minimizes the total cost per time unit. This incl......The ELDSP problem is a combined lot sizing and sequencing problem. A supplier produces and delivers components of different component types to a consumer in batches. The task is to determine the cycle time, i.e. that time between deliveries, which minimizes the total cost per time unit....... This includes the determination of the production sequence of the component types within each cycle. We investigate the computational behavior of two published algorithms, a heuristic and an optimal algorithm. With large number of component types, the optimal algorithm has long running times. We devise a hybrid...

  8. New Mathematical Model and Algorithm for Economic Lot Scheduling Problem in Flexible Flow Shop

    Directory of Open Access Journals (Sweden)

    H. Zohali

    2018-03-01

    Full Text Available This paper addresses the lot sizing and scheduling problem for a number of products in flexible flow shop with identical parallel machines. The production stages are in series, while separated by finite intermediate buffers. The objective is to minimize the sum of setup and inventory holding costs per unit of time. The available mathematical model of this problem in the literature suffers from huge complexity in terms of size and computation. In this paper, a new mixed integer linear program is developed for delay with the huge dimentions of the problem. Also, a new meta heuristic algorithm is developed for the problem. The results of the numerical experiments represent a significant advantage of the proposed model and algorithm compared with the available models and algorithms in the literature.

  9. Productivity and Cost Comparison of Two Different-Sized Skidders

    Science.gov (United States)

    John Klepac; Robert B. Rummer

    2000-01-01

    Productivity and cost of two skidders, Timberjack models 460 and 660, were evaluated while operatin in a loblolly pine plantation performin a clearcut harvest in the Southeastern US. Productivity without delimbing was 46.7 tonnes per PMH for the model 460 and 51.7 tonnes per PMH for the model 660. Cost per tonne was $1.70 for the model 460 and $1.90 for the model 660....

  10. Lot-sizing algorithms with applications to engineering and economics

    DEFF Research Database (Denmark)

    Vidal, Rene Victor Valqui; Ferreira, Jose S.

    1984-01-01

    of time-varying parameters. A comparison of the efficiency of the new solution procedures with well-known methods is developed. New applications of the techniques described within the fields of engineering (optimal design of a pump-pipe system) and economics (a model for import-planning) are referred to...

  11. 7 CFR 989.104 - Lot.

    Science.gov (United States)

    2010-01-01

    ... Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE RAISINS PRODUCED FROM GRAPES GROWN IN... inspection after reconditioning (such as sorting or drying) and whose original lot identity is no longer...

  12. Reactionary responses to the Bad Lot Objection.

    Science.gov (United States)

    Dellsén, Finnur

    2017-02-01

    As it is standardly conceived, Inference to the Best Explanation (IBE) is a form of ampliative inference in which one infers a hypothesis because it provides a better potential explanation of one's evidence than any other available, competing explanatory hypothesis. Bas van Fraassen famously objected to IBE thus formulated that we may have no reason to think that any of the available, competing explanatory hypotheses are true. While revisionary responses to the Bad Lot Objection concede that IBE needs to be reformulated in light of this problem, reactionary responses argue that the Bad Lot Objection is fallacious, incoherent, or misguided. This paper shows that the most influential reactionary responses to the Bad Lot Objection do nothing to undermine the original objection. This strongly suggests that proponents of IBE should focus their efforts on revisionary responses, i.e. on finding a more sophisticated characterization of IBE for which the Bad Lot Objection loses its bite. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. Product market integration, tax distortions and public sector size

    DEFF Research Database (Denmark)

    Andersen, Torben M.; Sørensen, Allan

    of product market integration for the public sector are far from straightforward. The reason is gains-from-trade effects which tend to increase the tax base and decrease the opportunity costs of public consumption (marginal utility of private consumption falls). It follows that the retrenchment view...... that product market integration inevitable leads to a downward pressure on public sector activities does not get support in a standard setting. A particularly noteworthy finding is that a country with a large public sector (strong preferences for public consumption) may benefit more by integrating......The implications of product market integration for public sector activities (transfers and public consumption) are considered in a standard setting. The analysis supports that a larger public sector (higher tax rate) tends to increase wages and worsen wage competitiveness. However, the implications...

  14. Product development practice in medium-sized food processing companies

    DEFF Research Database (Denmark)

    Harmsen, Hanne

    Market orientation has in numerous empirical NPD-studies been identified as critical for success. However, this study reveals a severe gap between the normative implications regarding market orientation and current product development practice in number of Danish food-processing companies. Through...

  15. Knowledge Production in Small and Medium Sized Enterprises

    Science.gov (United States)

    Van der Meer, Han

    2010-01-01

    This article presents the author's response to Hisham B. Ghassib's (2010) article entitled "Where Does Creativity Fit into a Productivist Industrial Model of Knowledge Production?" When the author tries to characterise Ghassib's (2010) world, three words come into mind: University, Scientific Knowledge, and Marx. The author's world on the other…

  16. Does size matter? An investigation of how department size and other organizational variables influence on publication productivity and citation impact

    Energy Technology Data Exchange (ETDEWEB)

    Aksnes, D.W.; Rørstad, K.; Piro, F.N.

    2016-07-01

    In this study, we investigate whether university department size is important in determining publication productivity and citation impact. Drawing on a unique dataset containing a variety of different variables at department levels, we are able to provide a richer picture of the research performance than what typically has been the case in many previous studies. In addition to analyzing the basic question of how size relates to scientific performance, we address whether the funding profile of the departments plays a role, whether the scientific performance is influenced by the composition of the academic personnel (in terms of gender, academic positions, recruiting personnel and the share of doctoral degree holders). The study shows that virtually no size effect can be identified and highly productive and highly cited units are found among both small, medium and large departments. For none of the organizational variables we are able to identify statistically significant relationships in respect to research performance at an overall level. We conclude that the productivity and citation differences at the level of departments cannot generally be explained by the selected variables for department size, funding structure and the composition of scientific personnel. (Author)

  17. Modelling size-fractionated primary production in the Atlantic Ocean from remote sensing

    Science.gov (United States)

    Brewin, Robert J. W.; Tilstone, Gavin H.; Jackson, Thomas; Cain, Terry; Miller, Peter I.; Lange, Priscila K.; Misra, Ankita; Airs, Ruth L.

    2017-11-01

    Marine primary production influences the transfer of carbon dioxide between the ocean and atmosphere, and the availability of energy for the pelagic food web. Both the rate and the fate of organic carbon from primary production are dependent on phytoplankton size. A key aim of the Atlantic Meridional Transect (AMT) programme has been to quantify biological carbon cycling in the Atlantic Ocean and measurements of total primary production have been routinely made on AMT cruises, as well as additional measurements of size-fractionated primary production on some cruises. Measurements of total primary production collected on the AMT have been used to evaluate remote-sensing techniques capable of producing basin-scale estimates of primary production. Though models exist to estimate size-fractionated primary production from satellite data, these have not been well validated in the Atlantic Ocean, and have been parameterised using measurements of phytoplankton pigments rather than direct measurements of phytoplankton size structure. Here, we re-tune a remote-sensing primary production model to estimate production in three size fractions of phytoplankton (10 μm) in the Atlantic Ocean, using measurements of size-fractionated chlorophyll and size-fractionated photosynthesis-irradiance experiments conducted on AMT 22 and 23 using sequential filtration-based methods. The performance of the remote-sensing technique was evaluated using: (i) independent estimates of size-fractionated primary production collected on a number of AMT cruises using 14C on-deck incubation experiments and (ii) Monte Carlo simulations. Considering uncertainty in the satellite inputs and model parameters, we estimate an average model error of between 0.27 and 0.63 for log10-transformed size-fractionated production, with lower errors for the small size class (10 μm), and errors generally higher in oligotrophic waters. Application to satellite data in 2007 suggests the contribution of cells 2 μm to total

  18. Cost of Maple Sap Production for Various Size Tubing Operations

    Science.gov (United States)

    Niel K. Huyler

    2000-01-01

    Reports sap production costs for small (500 to 1,000 taps), medium (1,000 to 5,000), and large (5,000 to 15,000) maple syrup operations that use plastic tubing with vacuum pumping. The average annual operating cost per tap ranged from $4.64 for a 500-tap sugarbush operation to $1.84 for a sugarbush with 10,000 taps. The weighted average was $2.87 per tap or $11.48 per...

  19. Ethanol production in small- to medium-size facilities

    Science.gov (United States)

    Hiler, E. A.; Coble, C. G.; Oneal, H. P.; Sweeten, J. M.; Reidenbach, V. G.; Schelling, G. T.; Lawhon, J. T.; Kay, R. D.; Lepori, W. A.; Aldred, W. H.

    1982-04-01

    In early 1980 system design criteria were developed for a small-scale ethanol production plant. The plant was eventually installed on November 1, 1980. It has a production capacity of 30 liters per hour; this can be increased easily (if desired) to 60 liters per hour with additional fermentation tanks. Sixty-six test runs were conducted to date in the alcohol production facility. Feedstocks evaluated in these tests include: corn (28 runs); grain sorghum (33 runs); grain sorghum grits (1 run); half corn/half sorghum (1 run); and sugarcane juice (3 runs). In addition, a small bench-scale fermentation and distillation system was used to evaluate sugarcane and sweet sorghum feedstocks prior to their evaluation in the larger unit. In each of these tests, evaluation of the following items was conducted: preprocessing requirements; operational problems; conversion efficiency (for example, liters of alcohol produced per kilogram of feedstock); energy balance and efficiency; nutritional recovery from stillage; solids separation by screw press; chemical characterization of stillage including liquid and solids fractions; wastewater requirements; and air pollution potential.

  20. The Significance of Farm Size in the Evaluation of Labour Productivity in Agriculture

    Directory of Open Access Journals (Sweden)

    Martina Novotná

    2016-01-01

    Full Text Available The paper deal with the analysis of difference in labour productivity of farms categorised according to their size, to determine if the set subsidy system influences labour productivity in the size groups of the farms. The source of data for enterprises analysis was the firms database, which contains accounting data of 926 farms with at least one employee. The observed data were from the 6 year period (2007–2012. The farms were divided, according to their size into four categories defined by the European Commission: micro, small, medium and large enterprises. The analysis of the labour productivity I based on the added value and labour costs revealed that there are big differences of the labour productivity levels in particular size groups of farms. The further analysis revealed that an adjustment of the farm approach of the labour productivity, when the paid operation subsidies are added (labour productivity II, changes this conclusion and the differences between particular size groups of farms decreased. Using σ-convergence, it was proved that the relative variability of the labour productivity II values decreased significantly in the case of the medium-sized farms. We can say that subsidies significantly influence the labour productivity in farms. On one hand, there is decrease of differences between the level values of particular size groups of farms; on the other hand, there is no significant decrease its variability (except the medium-sized farms.

  1. 21 CFR 610.1 - Tests prior to release required for each lot.

    Science.gov (United States)

    2010-04-01

    ....1 Section 610.1 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... release required for each lot. No lot of any licensed product shall be released by the manufacturer prior... considered in determining whether or not the test results meet the test objective, except that a test result...

  2. Effect of colour and relative product size (RPS) on consumer attitudes

    OpenAIRE

    Varsha Jain; Subhadip Roy; Adwita Pant

    2013-01-01

    Colour and visuals are used extensively by the advertisers of different product categories to attract consumer attention and create favourable attitude. Based on this premise, the present study aimed to explore the effect of colour and relative product size on the consumer attitudes incorporating the moderating role of product familiarity. An experimental design was used, with a sample size of 420 respondents of 18-25 years in a 3 (Product Size: Large/Med/Small) X 2 (Ad Colour: CL/BW) X 2 (Ge...

  3. Determination of supplier-to-supplier and lot-to-lot variability in glycation of recombinant human serum albumin expressed in Oryza sativa.

    Directory of Open Access Journals (Sweden)

    Grant E Frahm

    Full Text Available The use of different expression systems to produce the same recombinant human protein can result in expression-dependent chemical modifications (CMs leading to variability of structure, stability and immunogenicity. Of particular interest are recombinant human proteins expressed in plant-based systems, which have shown particularly high CM variability. In studies presented here, recombinant human serum albumins (rHSA produced in Oryza sativa (Asian rice (OsrHSA from a number of suppliers have been extensively characterized and compared to plasma-derived HSA (pHSA and rHSA expressed in yeast (Pichia pastoris and Saccharomyces cerevisiae. The heterogeneity of each sample was evaluated using size exclusion chromatography (SEC, reversed-phase high-performance liquid chromatography (RP-HPLC and capillary electrophoresis (CE. Modifications of the samples were identified by liquid chromatography-mass spectrometry (LC-MS. The secondary and tertiary structure of the albumin samples were assessed with far U/V circular dichroism spectropolarimetry (far U/V CD and fluorescence spectroscopy, respectively. Far U/V CD and fluorescence analyses were also used to assess thermal stability and drug binding. High molecular weight aggregates in OsrHSA samples were detected with SEC and supplier-to-supplier variability and, more critically, lot-to-lot variability in one manufactures supplied products were identified. LC-MS analysis identified a greater number of hexose-glycated arginine and lysine residues on OsrHSA compared to pHSA or rHSA expressed in yeast. This analysis also showed supplier-to-supplier and lot-to-lot variability in the degree of glycation at specific lysine and arginine residues for OsrHSA. Both the number of glycated residues and the degree of glycation correlated positively with the quantity of non-monomeric species and the chromatographic profiles of the samples. Tertiary structural changes were observed for most OsrHSA samples which

  4. La vallée du Lot en Lot-et-Garonne : inventaire topographique

    Directory of Open Access Journals (Sweden)

    Hélène Mousset

    2012-04-01

    Full Text Available La remise en navigation du Lot est à l’origine du projet d’inventaire du patrimoine de la vallée dans sa partie lot-et-garonnaise1. L’ampleur du territoire - 12 cantons riverains2 - et de la perspective historique - du Moyen Age à nos jours - imposaient d’emblée rigueur et objectifs clairs : méthode raisonnée de l’inventaire topographique pour un bilan homogène du patrimoine, fondée sur une enquête systématique du paysage bâti et du mobilier public, sans a priori. Le premier résultat est un catalogue patrimonial sous forme de bases de données3. Mais ce corpus documentaire hétérogène et touffu n’est pas une addition de monographies : il peut et doit être interrogé et exploité comme un ensemble apportant une connaissance renouvelée du territoire. Sans prétendre réaliser une synthèse de la totalité des données pour l’ensemble de la vallée4, les exemples qui vont suivre illustreront la façon dont le travail d’inventaire apporte réponses et nouvelles interrogations, concernant notamment l’occupation du sol, les paysages et l’architecture de cette partie de l’Agenais. Recherche de l’empreinte d’une époque déterminée, examen de la permanence des paysages bâtis sur la longue durée et observation des traces de mutations et flexions historiques, sont un triple niveau d’analyse attendu dans le cadre d’un inventaire sur un vaste territoire rural.The plan to reintroduce navigation on the Lot in the part of the river that flows through the Lot-et-Garonne department was at the origins of a survey of the heritage along the course of the river. The geographical scope of the survey was large (12 cantons along the river and the period covered by the heritage extends from the Middle ages up to the present day. The variety of buildings to be covered required a rigorous approach and clear objectives. The method of the topographical inventory was tailored to the production of a homogenous heritage audit

  5. 78 FR 69691 - Draft Guidance for Industry on Product Name Placement, Size, and Prominence in Advertising and...

    Science.gov (United States)

    2013-11-20

    ...] Draft Guidance for Industry on Product Name Placement, Size, and Prominence in Advertising and... entitled ``Product Name Placement, Size, and Prominence in Advertising and Promotional Labeling.'' When... promotional labeling and advertising for prescription human drugs, including biological drug products, and...

  6. Use of intradermal botulinum toxin to reduce sebum production and facial pore size.

    Science.gov (United States)

    Shah, Anil R

    2008-09-01

    Review the safety profile and subjective efficacy of intradermal botulinum toxin type A in facial pore size and sebum production. Retrospective analysis of 20 patients. Twenty consecutive patients with a single application of intradermal botulinum toxin type A were examined: Patients (17/20) noted an improvement in sebum production and a decrease in pores size at 1 month after injection. No complications were observed, and 17/20 patients were satisfied with the procedure. Preliminary data suggests that intradermal botulinum toxin may play a role in decreasing sebum production. Further quantitive study may be necessary to determine effects of intradermal botulinum toxin on pore size.

  7. 7 CFR 993.104 - Lot.

    Science.gov (United States)

    2010-01-01

    ... means any quantity of prunes delivered by one producer or one dehydrator to a handler on which... purposes of §§ 993.50 and 993.150 means: (1) With respect to in-line inspection either (i) the aggregate... identification (e.g., brand) if in consumer packages, and offered for inspection as a lot; or (ii) prunes...

  8. COAP BASED ACUTE PARKING LOT MONITORING SYSTEM USING SENSOR NETWORKS

    Directory of Open Access Journals (Sweden)

    R. Aarthi

    2014-06-01

    Full Text Available Vehicle parking is the act of temporarily maneuvering a vehicle in to a certain location. To deal with parking monitoring system issue such as traffic, this paper proposes a vision of improvements in monitoring the vehicles in parking lots based on sensor networks. Most of the existing paper deals with that of the automated parking which is of cluster based and each has its own overheads like high power, less energy efficiency, incompatible size of lots, space. The novel idea in this work is usage of CoAP (Constrained Application Protocol which is recently created by IETF (draft-ietf-core-coap-18, June 28, 2013, CoRE group to develop RESTful application layer protocol for communications within embedded wireless networks. This paper deals with the enhanced CoAP protocol using multi hop flat topology, which makes the acuters feel soothe towards parking vehicles. We aim to minimize the time consumed for finding free parking lot as well as increase the energy efficiency

  9. Body size and the timing of egg production in parasitoid wasps.

    NARCIS (Netherlands)

    Ellers, J.; Jervis, M.

    2003-01-01

    In insects several key fitness-related variables are positively correlated with intraspecific variation in body size, but little is known about size-related variation in the timing of egg production within species. Female insects are known to vary in the degree to which they concentrate egg

  10. Size-density metrics, leaf area, and productivity in eastern white pine

    Science.gov (United States)

    J. C. Innes; M. J. Ducey; J. H. Gove; W. B. Leak; J. P. Barrett

    2005-01-01

    Size-density metrics are used extensively for silvicultural planning; however, they operate on biological assumptions that remain relatively untested. Using data from 12 even-aged stands of eastern white pine (Pinus strobus L.) growing in southern New Hampshire, we compared size-density metrics with stand productivity and its biological components,...

  11. Simulation model for improved production planning and control through quality, cycle time and batch size management

    Directory of Open Access Journals (Sweden)

    Kotevski Živko

    2015-01-01

    Full Text Available Production planning and control (PPC systems are the base of all production facilities. In today's surroundings, having a good PPC system generates lots of benefits for the companies. But, having an excellent PPC system provides great competitive advantage and serious reduction of cost in many fields. In order to get to a point of having excellent PPC, the companies turn more and more to the newest software tools, for simulations as an example. Considering today's advanced computer technology, by using the simulations in this area, companies will have strong asset when dealing with different kinds of wastes, delays, overstock, bottlenecks and generally loss of time. This model is applicable in almost all production facilities. Taking into account the different scrap percentages for the pieces that form the end product, a detailed model and analysis were made in order to determine the optimal starting parameters. At first all the conditions of the company were determined, conceptual model was created along with all assumptions. Then the model was verified and validated and at the end a cost benefit analysis was conducted in order to have clear results.

  12. Micro Fine Sized Palm Oil Fuel Ash Produced Using a Wind Tunnel Production System

    Directory of Open Access Journals (Sweden)

    R. Ahmadi

    2016-01-01

    Full Text Available Micro fine sized palm oil fuel ash (POFA is a new supplementary cementitious material that can increase the strength, durability, and workability of concrete. However, production of this material incurs high cost and is not practical for the construction industry. This paper investigates a simple methodology of producing micro fine sized POFA by means of a laboratory scale wind tunnel system. The raw POFA obtained from an oil palm factory is first calcined to remove carbon residue and then grinded in Los Angeles abrasion machine. The grinded POFA is then blown in the fabricated wind tunnel system for separation into different ranges of particle sizes. The physical, morphological, and chemical properties of the micro fine sized POFA were then investigated using Laser Particle Size Analyser (PSA, nitrogen sorption, and Scanning Electron Microscopy with Energy Dispersive X-Ray (SEM-EDX. A total of 32.1% micro fine sized POFA were collected from each sample blown, with the size range of 1–10 micrometers. The devised laboratory scale of wind tunnel production system is successful in producing micro fine sized POFA and, with modifications, this system is envisaged applicable to be used to commercialize micro fine sized POFA production for the construction industry.

  13. Rutile nanopowders for pigment production: Formation mechanism and particle size prediction

    Science.gov (United States)

    Zhang, Wu; Tang, Hongxin

    2018-01-01

    Formation mechanism and particle size prediction of rutile nanoparticles for pigment production were investigated. Anatase nanoparticles were observed by oriented attachment with parallel lattice fringe spaces of 0.2419 nm. Upon increasing the calcination temperature, the (1 1 0) plane of rutile was gradually observed, suggesting that the anatase (1 0 3) planes undergo internal structural rearrangement of oxygen and titanium ions into rutile phase due to ionic diffusion. Backpropagation neural network was used to predict particle size of rutile nanopowders, the prediction errors were all smaller than 2%, providing an efficient method to control particle size in pigment production.

  14. Size- and food-dependent growth drives patterns of competitive dominance along productivity gradients.

    Science.gov (United States)

    Huss, Magnus; Gårdmark, Anna; Van Leeuwen, Anieke; de Roos, André M

    2012-04-01

    Patterns of coexistence among competing species exhibiting size- and food-dependent growth remain largely unexplored. Here we studied mechanisms behind coexistence and shifts in competitive dominance in a size-structured fish guild, representing sprat and herring stocks in the Baltic Sea, using a physiologically structured model of competing populations. The influence of degree of resource overlap and the possibility of undergoing ontogenetic diet shifts were studied as functions of zooplankton and zoobenthos productivity. By imposing different size-dependent mortalities, we could study the outcome of competition under contrasting environmental regimes representing poor and favorable growth conditions. We found that the identity of the dominant species shifted between low and high productivity. Adding a herring-exclusive benthos resource only provided a competitive advantage over sprat when size-dependent mortality was high enough to allow for rapid growth in the zooplankton niche. Hence, the importance of a bottom-up effect of varying productivity was dependent on a strong top-down effect. Although herring could depress shared resources to lower levels than could sprat and also could access an exclusive resource, the smaller size at maturation of sprat allowed it to coexist with herring and, in some cases, exclude it. Our model system, characterized by interactions among size cohorts, allowed for consumer coexistence even at full resource overlap at intermediate productivities when size-dependent mortality was low. Observed shifts in community patterns were crucially dependent on the explicit consideration of size- and food-dependent growth. Accordingly, we argue that accounting for food-dependent growth and size-dependent interactions is necessary to better predict changes in community structure and dynamics following changes in major ecosystem drivers such as resource productivity and mortality, which are fundamental for our ability to manage exploitation of

  15. Estimating Most Productive Scale Size in Data Envelopment Analysis with Integer Value Data

    Science.gov (United States)

    Dwi Sari, Yunita; Angria S, Layla; Efendi, Syahril; Zarlis, Muhammad

    2018-01-01

    The most productive scale size (MPSS) is a measurement that states how resources should be organized and utilized to achieve optimal results. The most productive scale size (MPSS) can be used as a benchmark for the success of an industry or company in producing goods or services. To estimate the most productive scale size (MPSS), each decision making unit (DMU) should pay attention the level of input-output efficiency, by data envelopment analysis (DEA) method decision making unit (DMU) can identify units used as references that can help to find the cause and solution from inefficiencies can optimize productivity that main advantage in managerial applications. Therefore, data envelopment analysis (DEA) is chosen to estimating most productive scale size (MPSS) that will focus on the input of integer value data with the CCR model and the BCC model. The purpose of this research is to find the best solution for estimating most productive scale size (MPSS) with input of integer value data in data envelopment analysis (DEA) method.

  16. The Impact of Product Assortment Size and Attribute Quantity on Information Searches

    DEFF Research Database (Denmark)

    Dörnyei, Krisztina Rita; Chrysochou, Polymeros; Krystallis, Athanasios

    2017-01-01

    Purpose: This paper investigates the impact of assortment size and attribute quantity on the depth and content of consumer information searches. Design/methodology/approach: For a computer-aided experiment using an information display board, participants (n=393) were placed in a simulated shopping...... situation that involved choosing a product among three sets of frequently purchased, low-involvement, FMCG alternatives. Findings: The findings show that when the assortment size increases, consumers acquire information from more products and cues but sacrifice product attributes. In particular...

  17. Firm size and productivity. Evidence from the electricity distribution industry in Brazil

    International Nuclear Information System (INIS)

    Tovar, Beatriz; Javier Ramos-Real, Francisco; De Almeida, Edmar Fagundes

    2011-01-01

    In this paper we apply Stochastic Frontier Analysis through a distance function to investigate the impact of firm size on productivity development in electricity distribution. We use a sample of seventeen Brazilian firms from 1998 to 2005 and decompose productivity into technical efficiency, scale efficiency and technical change. Moreover, a further step is to decompose the technical change measurement into several components. The results indicate that firm size is important for industry's productivity, and therefore a key aspect to consider when making decisions that affect the market structure in the electricity distribution industry. (author)

  18. Measurement of concentration and size distribution of radon decay products in homes using air cleaners

    International Nuclear Information System (INIS)

    Montassier, N.; Hopke, P.K.; Shi, Y.; McCallum, B.

    1992-01-01

    By removing particles, air cleaners can also eliminate radon decay products. However, by removing the particles, the open-quotes unattachedclose quotes fraction of the radon progeny is increased leading to a higher dose per unit exposure. Thus, both the concentration and size distributions of the radon decay products are needed to evaluate air cleaners. Three types of room air cleaners, NO-RAD Radon Removal System, Electronic Air Cleaner and PUREFLOW Air Treatment System were tested in a single family home in Arnprior, Ontario (Canada). Semi-continuous measurements of radon gas concentration and radon decay product activity weighted size distribution were performed in the kitchen/dining room under real living conditions. The effects of air cleaners on both the concentration and size distribution of the radon decay products were measured, and their impact on the dose of radiation given to the lung tissue were examined

  19. The Effect of Pixel Size on the Accuracy of Orthophoto Production

    Science.gov (United States)

    Kulur, S.; Yildiz, F.; Selcuk, O.; Yildiz, M. A.

    2016-06-01

    In our country, orthophoto products are used by the public and private sectors for engineering services and infrastructure projects, Orthophotos are particularly preferred due to faster and are more economical production according to vector digital photogrammetric production. Today, digital orthophotos provide an expected accuracy for engineering and infrastructure projects. In this study, the accuracy of orthophotos using pixel sizes with different sampling intervals are tested for the expectations of engineering and infrastructure projects.

  20. Lot quality assurance sampling for monitoring immunization programmes: cost-efficient or quick and dirty?

    Science.gov (United States)

    Sandiford, P

    1993-09-01

    In recent years Lot quality assurance sampling (LQAS), a method derived from production-line industry, has been advocated as an efficient means to evaluate the coverage rates achieved by child immunization programmes. This paper examines the assumptions on which LQAS is based and the effect that these assumptions have on its utility as a management tool. It shows that the attractively low sample sizes used in LQAS are achieved at the expense of specificity unless unrealistic assumptions are made about the distribution of coverage rates amongst the immunization programmes to which the method is applied. Although it is a very sensitive test and its negative predictive value is probably high in most settings, its specificity and positive predictive value are likely to be low. The implications of these strengths and weaknesses with regard to management decision-making are discussed.

  1. Aggregate Production Planning, Casestudy in a Medium-sized Industry of the Rubber Production Line in Ecuador.

    Science.gov (United States)

    Rosero-Mantilla, César; Sánchez-Sailema, Mayra; Sánchez-Rosero, Carlos; Galleguillos-Pozo, Rosa

    2017-06-01

    This research aims to improve the productivity in the rubber line of a medium-sized industry by increasing the production capacities through the use of the Aggregate Production Planning model. For this purpose an analysis of the production processes of the line was made and the aggregate plan was defined evaluating two strategies: Exact Production Plan (Zero Inventory) and Constant Workforce Plan (Vary Inventory) by studying the costs of both inventory maintenance and workforce. It was also determined how the installed capacity was used with the standards of the rubber line and measures for decreasing production costs were proposed. It was proven that only 70% of the plant capacity was being used so it could be possible to produce more units and to obtain a bigger market for the products of this line.+

  2. Food and disturbance effects on Arctic benthic biomass and production size spectra

    Science.gov (United States)

    Górska, Barbara; Włodarska-Kowalczuk, Maria

    2017-03-01

    Body size is a fundamental biological unit that is closely coupled to key ecological properties and processes. At the community level, changes in size distributions may influence energy transfer pathways in benthic food webs and ecosystem carbon cycling; nevertheless they remain poorly explored in benthic systems, particularly in the polar regions. Here, we present the first assessment of the patterns of benthic biomass size spectra in Arctic coastal sediments and explore the effects of glacial disturbance and food availability on the partitioning of biomass and secondary productivity among size-defined components of benthic communities. The samples were collected in two Arctic fjords off west Spitsbergen (76 and 79°N), at 6 stations that represent three regimes of varying food availability (indicated by chlorophyll a concentration in the sediments) and glacial sedimentation disturbance intensity (indicated by sediment accumulation rates). The organisms were measured using image analysis to assess the biovolume, biomass and the annual production of each individual. The shape of benthic biomass size spectra at most stations was bimodal, with the location of a trough and peaks similar to those previously reported in lower latitudes. In undisturbed sediments macrofauna comprised 89% of the total benthic biomass and 56% of the total production. The lower availability of food resources seemed to suppress the biomass and secondary production across the whole size spectra (a 6-fold decrease in biomass and a 4-fold decrease in production in total) rather than reshape the spectrum. At locations where poor nutritional conditions were coupled with disturbance, the biomass was strongly reduced in selected macrofaunal size classes (class 10 and 11), while meiofaunal biomass and production were much higher, most likely due to a release from macrofaunal predation and competition pressure. As a result, the partitioning of benthic biomass and production shifted towards meiofauna

  3. 77 FR 12311 - Guidance for Industry on Size of Beads in Drug Products Labeled for Sprinkle; Availability

    Science.gov (United States)

    2012-02-29

    ...] Guidance for Industry on Size of Beads in Drug Products Labeled for Sprinkle; Availability AGENCY: Food and... the availability of a guidance for industry entitled ``Size of Beads in Drug Products Labeled for... Evaluation and Research's (CDER's) current thinking on appropriate size ranges for beads in drug products...

  4. 76 FR 3144 - Draft Guidance for Industry on Size of Beads in Drug Products Labeled for Sprinkle; Availability

    Science.gov (United States)

    2011-01-19

    ...] Draft Guidance for Industry on Size of Beads in Drug Products Labeled for Sprinkle; Availability AGENCY... announcing the availability of a draft guidance for industry entitled ``Size of Beads in Drug Products... Evaluation and Research's (CDER's) current thinking on appropriate size ranges for beads in drug products...

  5. Egg and a lot of science: an interdisciplinary experiment

    OpenAIRE

    Gayer, M. C.; Interdisciplinary Research Group on Teaching Practice, Graduate Program in Biochemistry, Unipampa, RS, Brazil Laboratory of Physicochemical Studies and Natural Products, Post Graduate Program in Biochemistry, Unipampa, RS, Brazil; T., Rodrigues D.; Interdisciplinary Research Group on Teaching Practice, Graduate Program in Biochemistry, Unipampa, RS, Brazil Laboratory of Physicochemical Studies and Natural Products, Post Graduate Program in Biochemistry, Unipampa, RS, Brazil; Denardin, E. L.G.; Laboratory of Physicochemical Studies and Natural Products, Post Graduate Program in Biochemistry, Unipampa, RS, Brazil; Roehrs, R.; Interdisciplinary Research Group on Teaching Practice, Graduate Program in Biochemistry, Unipampa, RS, Brazil Laboratory of Physicochemical Studies and Natural Products, Post Graduate Program in Biochemistry, Unipampa, RS, Brazil

    2014-01-01

    Egg and a lot of science: an interdisciplinary experimentGayer, M.C.1,2;Rodrigues, D.T.1,2; Escoto, D.F.1; Denardin, E.L.G.2, Roehrs, R.1,21Interdisciplinary Research Group on Teaching Practice, Graduate Program in Biochemistry, Unipampa, RS, Brazil2Laboratory of Physicochemical Studies and Natural Products, Post Graduate Program in Biochemistry, Unipampa, RS, BrazilIntroduction: How to tell if an egg is rotten? How to calculate the volume of an egg? Because the rotten egg float? Why has this...

  6. Research on a simulation-based ship production support system for middle-sized shipbuilding companies

    Directory of Open Access Journals (Sweden)

    Young Joo Song

    2009-12-01

    Full Text Available Today, many middle-sized shipbuilding companies in Korea are experiencing strong competition from shipbuilding companies in other nations. This competition is particularly affecting small- and middle-sized shipyards, rather than the major shipyards that have their own support systems and development capabilities. The acquisition of techniques that would enable maximization of production efficiency and minimization of the gap between planning and execution would increase the competitiveness of small- and middle-sized Korean shipyards. In this paper, research on a simulation-based support system for ship production management, which can be applied to the shipbuilding processes of middle-sized shipbuilding companies, is presented. The simulation research includes layout optimization, load balancing, work stage operation planning, block logistics, and integrated material management. Each item is integrated into a network system with a value chain that includes all shipbuilding processes.

  7. Research on a simulation-based ship production support system for middle-sized shipbuilding companies

    Science.gov (United States)

    Song, Young Joo; Woo, Jong Hun; Shin, Jong Gye

    2009-12-01

    Today, many middle-sized shipbuilding companies in Korea are experiencing strong competition from shipbuilding companies in other nations. This competition is particularly affecting small- and middle-sized shipyards, rather than the major shipyards that have their own support systems and development capabilities. The acquisition of techniques that would enable maximization of production efficiency and minimization of the gap between planning and execution would increase the competitiveness of small- and middle-sized Korean shipyards. In this paper, research on a simulation-based support system for ship production management, which can be applied to the shipbuilding processes of middle-sized shipbuilding companies, is presented. The simulation research includes layout optimization, load balancing, work stage operation planning, block logistics, and integrated material management. Each item is integrated into a network system with a value chain that includes all shipbuilding processes.

  8. The roles of productivity and ecosystem size in determining food chain length in tropical terrestrial ecosystems.

    Science.gov (United States)

    Young, Hillary S; McCauley, Douglas J; Dunbar, Robert B; Hutson, Michael S; Ter-Kuile, Ana Miller; Dirzo, Rodolfo

    2013-03-01

    Many different drivers, including productivity, ecosystem size, and disturbance, have been considered to explain natural variation in the length of food chains. Much remains unknown about the role of these various drivers in determining food chain length, and particularly about the mechanisms by which they may operate in terrestrial ecosystems, which have quite different ecological constraints than aquatic environments, where most food chain length studies have been thus far conducted. In this study, we tested the relative importance of ecosystem size and productivity in influencing food chain length in a terrestrial setting. We determined that (1) there is no effect of ecosystem size or productive space on food chain length; (2) rather, food chain length increases strongly and linearly with productivity; and (3) the observed changes in food chain length are likely achieved through a combination of changes in predator size, predator behavior, and consumer diversity along gradients in productivity. These results lend new insight into the mechanisms by which productivity can drive changes in food chain length, point to potential for systematic differences in the drivers of food web structure between terrestrial and aquatic systems, and challenge us to consider how ecological context may control the drivers that shape food chain length.

  9. Combinative Particle Size Reduction Technologies for the Production of Drug Nanocrystals

    Directory of Open Access Journals (Sweden)

    Jaime Salazar

    2014-01-01

    Full Text Available Nanosizing is a suitable method to enhance the dissolution rate and therefore the bioavailability of poorly soluble drugs. The success of the particle size reduction processes depends on critical factors such as the employed technology, equipment, and drug physicochemical properties. High pressure homogenization and wet bead milling are standard comminution techniques that have been already employed to successfully formulate poorly soluble drugs and bring them to market. However, these techniques have limitations in their particle size reduction performance, such as long production times and the necessity of employing a micronized drug as the starting material. This review article discusses the development of combinative methods, such as the NANOEDGE, H 96, H 69, H 42, and CT technologies. These processes were developed to improve the particle size reduction effectiveness of the standard techniques. These novel technologies can combine bottom-up and/or top-down techniques in a two-step process. The combinative processes lead in general to improved particle size reduction effectiveness. Faster production of drug nanocrystals and smaller final mean particle sizes are among the main advantages. The combinative particle size reduction technologies are very useful formulation tools, and they will continue acquiring importance for the production of drug nanocrystals.

  10. Finite size and dynamical effects in pair production by an external field

    International Nuclear Information System (INIS)

    Martin, C.; Vautherin, D.

    1988-12-01

    We evaluate the rate of pair production in a uniform electric field confined into a bounded region in space. Using the Balian-Bloch expansion of Green's functions we obtain explicit expressions for finite size corrections to Schwinger's formula. The case of a time-dependent boundary, relevant to describe energy deposition by quark-antiquark pair production in ultrarelativistic collisions, is also investigated. We find that finite size effects are important in nuclear collisions. They decrease when the strength of the chromo-electric field between the nuclei is large. As a result, the rate of energy deposition increases sharply with the mass number A of the colliding nuclei

  11. Interlayer catalytic exfoliation realizing scalable production of large-size pristine few-layer graphene

    OpenAIRE

    Geng, Xiumei; Guo, Yufen; Li, Dongfang; Li, Weiwei; Zhu, Chao; Wei, Xiangfei; Chen, Mingliang; Gao, Song; Qiu, Shengqiang; Gong, Youpin; Wu, Liqiong; Long, Mingsheng; Sun, Mengtao; Pan, Gebo; Liu, Liwei

    2013-01-01

    Mass production of reduced graphene oxide and graphene nanoplatelets has recently been achieved. However, a great challenge still remains in realizing large-quantity and high-quality production of large-size thin few-layer graphene (FLG). Here, we create a novel route to solve the issue by employing one-time-only interlayer catalytic exfoliation (ICE) of salt-intercalated graphite. The typical FLG with a large lateral size of tens of microns and a thickness less than 2?nm have been obtained b...

  12. Multi products single machine economic production quantity model with multiple batch size

    Directory of Open Access Journals (Sweden)

    Ata Allah Taleizadeh

    2011-04-01

    Full Text Available In this paper, a multi products single machine economic order quantity model with discrete delivery is developed. A unique cycle length is considered for all produced items with an assumption that all products are manufactured on a single machine with a limited capacity. The proposed model considers different items such as production, setup, holding, and transportation costs. The resulted model is formulated as a mixed integer nonlinear programming model. Harmony search algorithm, extended cutting plane and particle swarm optimization methods are used to solve the proposed model. Two numerical examples are used to analyze and to evaluate the performance of the proposed model.

  13. Factors affecting capsule size and production by lactic acid bacteria used as dairy starter cultures.

    Science.gov (United States)

    Hassan, A N; Frank, J F; Shalabi, S I

    2001-02-28

    The effects of sugar substrates on capsule size and production by some capsule-forming nonropy and ropy dairy starter cultures were studied. Test sugars (glucose, lactose, galactose, or sucrose) were used as a sole carbohydrate source and the presence of a capsule and its size were determined by using confocal scanning laser microscopy. Nonropy strains produced maximum capsule size when grown in milk. Strains that did not produce capsules in milk did not produce them in any other growth medium. Specific sugars required for capsule production were strain-dependent. Increasing lactose content of Elliker broth from 0.5 to 5% or adding whey protein or casein digest produced larger capsules. Whey protein concentrate stimulated production of larger capsules than did casamino acids or casitone. Some Streptococcus thermophilus strains produced capsules when grown on galactose only. Nonropy strains of Lactobacillus delbrueckii subsp. bulgaricus produced capsules on lactose, but not on glucose. A ropy strain of Lactobacillus delbrueckii subsp. bulgaricus produced a constant capsule size regardless of the growth medium. The ability of some strains of Streptococcus thermophilus to use galactose in capsule production could reduce browning of mozzarella cheese during baking by removing a source of reducing sugar. Media that do not support capsule production may improve cell harvesting.

  14. A Comparative Study on the Lot Release Systems for Vaccines as of 2016.

    Science.gov (United States)

    Fujita, Kentaro; Naito, Seishiro; Ochiai, Masaki; Konda, Toshifumi; Kato, Atsushi

    2017-09-25

    Many countries have already established their own vaccine lot release system that is designed for each country's situation: while the World Health Organization promotes for the convergence of these regulatory systems so that vaccines of assured quality are provided globally. We conducted a questionnaire-based investigation of the lot release systems for vaccines in 7 countries and 2 regions. We found that a review of the summary protocol by the National Regulatory Authorities was commonly applied for the independent lot release of vaccines, however, we also noted some diversity between countries, especially in regard to the testing policy. Some countries and regions, including Japan, regularly tested every lot of vaccines, whereas the frequency of these tests was reduced in other countries and regions as determined based on the risk assessment of these products. Test items selected for the lot release varied among the countries or regions investigated, although there was a tendency to prioritize the potency tests. An understanding of the lot release policy may contribute to improving and harmonizing the lot release system globally in the future.

  15. 9 CFR 351.19 - Refusal of certification for specific lots.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Refusal of certification for specific lots. 351.19 Section 351.19 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION...

  16. Metal concentrations from permeable pavement parking lot in Edison, NJ

    Data.gov (United States)

    U.S. Environmental Protection Agency — The U.S. Environmental Protection Agency constructed a 4000-m2 parking lot in Edison, New Jersey in 2009. The parking lot is surfaced with three permeable pavements...

  17. Size-fractionated dissolved primary production and carbohydrate composition of the coccolithophore Emiliania huxleyi

    Science.gov (United States)

    Borchard, C.; Engel, A.

    2015-02-01

    Extracellular release (ER) by phytoplankton is the major source of fresh dissolved organic carbon (DOC) in marine ecosystems and accompanies primary production during all growth phases. Little is known, so far, on size and composition of released molecules, and to which extent ER occurs passively, by leakage, or actively, by exudation. Here, we report on ER by the widespread and bloom-forming coccolithophore Emiliania huxleyi grown under steady-state conditions in phosphorus-controlled chemostats (N:P = 29, growth rate of μ = 0.2 d-1) at present-day and high-CO2 concentrations. 14C incubations were performed to determine primary production (PP), comprised of particulate (PO14C) and dissolved organic carbon (DO14C). Concentration and composition of particulate combined carbohydrates (pCCHO) and high-molecular-weight (>1 kDa, HMW) dissolved combined carbohydrates (dCCHO) were determined by ion chromatography. Information on size distribution of ER products was obtained by investigating distinct size classes (10 kDa was significantly different, with a higher mol% of arabinose. The mol% of acidic sugars increased and that of glucose decreased with increasing size of HMW-dCCHO. We conclude that larger polysaccharides follow different production and release pathways than smaller molecules, potentially serving distinct ecological and biogeochemical functions.

  18. Differences in productive robustness in rabbits selected for reproductive longevity or litter size

    DEFF Research Database (Denmark)

    Theilgaard, R; Baselga, M; Blas, E

    2009-01-01

    The aim of this work was to evaluate the ability of a line selected for reproductive longevity (LP) to confront productive challenges compared to a line selected during 31 generations for litter size at weaning (V). A total of 133 reproductive rabbit does were used (72 and 61 from LP and V lines,...

  19. 77 FR 3779 - Guidance for Industry on Product Name Placement, Size, and Prominence in Advertising and...

    Science.gov (United States)

    2012-01-25

    ... Advertising and Promotional Labeling; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice... entitled ``Product Name Placement, Size, and Prominence in Advertising and Promotional Labeling.'' The..., prominence, and frequency in promotional labeling and advertising for prescription human and animal drugs and...

  20. New Balancing Equipment for Mass Production of Small and Medium-Sized Electrical Machines

    DEFF Research Database (Denmark)

    Argeseanu, Alin; Ritchie, Ewen; Leban, Krisztina Monika

    2010-01-01

    The level of vibration and noise is an important feature. It is good practice to explain the significance of the indicators of the quality of electrical machines. The mass production of small and medium-sized electrical machines demands speed (short typical measurement time), reliability...

  1. How Rural Market Imperfections Shape the Relation Between Farm Size and Productivity

    DEFF Research Database (Denmark)

    Heltberg, Rasmus

    The subject of this article is the alleged inverse relationship between farm size and productivity in developing countries. The recent controversy is reviewed, and a framework is provided to explain the inverse relationship based on plausible assumptions about imperfections in the markets for labor......, credit and land. On this basis testable hypotheses are derived. Using fram.level panel data from Pakistan, the framework is assessed by regressing output on operational fram size, size of owned holding, family size, tenurial status and irrigation status of the land. Household fixed effects are used...... to account for remaining unobserved heterogenity. It is concluded that an inverse relationship is present in Pakistan, and that the market imperfections framework performs well with the data...

  2. Mean size among the particles of short-lived radon daughter products in the atmosphere

    International Nuclear Information System (INIS)

    Nakatani, S.

    1980-01-01

    The diffusion-battery method is used to classify the radioactive particles according to their sizes. The diffusion coefficient is determined from the fractional penetration of the particles through the battery. Particle radii are derived from the diffusion coefficients with the Stokes-Cunningham-Millikan formula. At the exit and entrance of the battery, individual concentrations of radon daughter products 218 Po, 214 Pb, 214 Bi are determined. Thus the mean sizes of individual radon daughters can be obtained from the fractional penetration of individual nuclides through the diffusion battery. Despite large statistical fluctuations the mean size of 214 Bi is always shifted toward the larger size region as compared with those of other radionuclides

  3. 7 CFR 983.52 - Failed lots/rework procedure.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Failed lots/rework procedure. 983.52 Section 983.52..., ARIZONA, AND NEW MEXICO Regulations § 983.52 Failed lots/rework procedure. (a) Substandard pistachios... committee may establish, with the Secretary's approval, appropriate rework procedures. (b) Failed lot...

  4. 40 CFR 52.128 - Rule for unpaved parking lots, unpaved roads and vacant lots.

    Science.gov (United States)

    2010-07-01

    ... six (6) percent for unpaved road surfaces or eight (8) percent for unpaved parking lot surfaces as... calculating percent cover.) (iii) Vegetative Density Factor. Cut a single, representative piece of vegetation... that are not covered by any piece of the vegetation. To calculate percent vegetative density, use...

  5. The field measurements of the activity-weighted size distributions of radon decay products

    International Nuclear Information System (INIS)

    Wasiolek, P.; Montassier, N.; Hopke, P.K.

    1991-01-01

    Because of the importance of particle size in the calculations of dose deposited in the respiratory tract by radon progeny, the determination of the size distribution of radon decay products in indoor air had increased in interest in recent years. A system for the measurement of the activity-weighted size distribution of radon decay products at environmental levels has been developed. The system (ASC-GSA) utilizes a combination of six multiple wire screens (Graded Screen Array) sampler detector units operated in parallel. The cut off points of the samplers and the data deconvolution procedure allow to obtain the activity fractions of radon progeny in the size range 0.5-500 mn. The computer control of sampling, alpha counting and data storage permits the operation of the system on the semi-continuous basis. The primary application of the ASC-GSA system has been to collect data of activity-weighted size distributions of radon progeny in real house environments. The results of field measurements in several houses with elevated radon levels are presented

  6. Farm size, land yields, and the agricultural production function: an analysis for fifteen developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Cornia, G A

    1985-04-01

    This paper analyzes the relationship between factor inputs, land yields, and labor productivity for farms of different size on the basis of FAO farm management data for 15 developing countries. For all but three countries a strong negative correlation is found between farm size on the one side, and factor inputs and yields per hectare on the other. The fitting of unconstrained production functions to the above data suggests that in only few cases can the decline in yields for increasing farm size be attributed to decreasing returns to scale. The higher yields observed in small farms are mainly to be ascribed to higher factor inputs and to a more intensive use of land. Therefore, where conspicuous labor surpluses exist, the superiority of small farming provides solid arguments in favor of land redistribution. Such an agrarian reform would determine higher output, higher labor absorption and a more equitable income distribution, thus contributing in a decisive manner to the alleviation of rural poverty. The paper also provides estimates of cross-sectional production functions for the 15 countries analyzed. Empirical relations are found between the output elasticities of land, labor, and intermediate inputs and physical indicators of their scarcity. The paper concludes by proposing a simple method for deriving a long-term production function for agriculture. 23 references, 3 figures, 6 tables.

  7. Designing a two-rank acceptance sampling plan for quality inspection of geospatial data products

    Science.gov (United States)

    Tong, Xiaohua; Wang, Zhenhua; Xie, Huan; Liang, Dan; Jiang, Zuoqin; Li, Jinchao; Li, Jun

    2011-10-01

    To address the disadvantages of classical sampling plans designed for traditional industrial products, we originally propose a two-rank acceptance sampling plan (TRASP) for the inspection of geospatial data outputs based on the acceptance quality level (AQL). The first rank sampling plan is to inspect the lot consisting of map sheets, and the second is to inspect the lot consisting of features in an individual map sheet. The TRASP design is formulated as an optimization problem with respect to sample size and acceptance number, which covers two lot size cases. The first case is for a small lot size with nonconformities being modeled by a hypergeometric distribution function, and the second is for a larger lot size with nonconformities being modeled by a Poisson distribution function. The proposed TRASP is illustrated through two empirical case studies. Our analysis demonstrates that: (1) the proposed TRASP provides a general approach for quality inspection of geospatial data outputs consisting of non-uniform items and (2) the proposed acceptance sampling plan based on TRASP performs better than other classical sampling plans. It overcomes the drawbacks of percent sampling, i.e., "strictness for large lot size, toleration for small lot size," and those of a national standard used specifically for industrial outputs, i.e., "lots with different sizes corresponding to the same sampling plan."

  8. A basic period approach to the economic lot scheduling problem with shelf life considerations

    NARCIS (Netherlands)

    Soman, C.A.; van Donk, D.P.; Gaalman, G.J.C.

    2004-01-01

    Almost all the research on the economic lot scheduling problem (ELSP) considering limited shelf life of products has assumed a common cycle approach and an unrealistic assumption of possibility of deliberately reducing the production rate. In many cases, like in food processing industry where

  9. 7 CFR 56.37 - Lot marking of officially identified shell eggs.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Lot marking of officially identified shell eggs. 56.37... AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) VOLUNTARY GRADING OF SHELL EGGS Grading of Shell Eggs Identifying and Marking Products § 56.37...

  10. Sperm production, testicular size, serum gonadotropins and testosterone levels in Merino and Corriedale breeds.

    Science.gov (United States)

    Fernandez-Abella, D; Becu-Villalobos, D; Lacau-Mengido, I M; Villegas, N; Bentancur, O

    1999-01-01

    The relationships between testis size, hormone secretion and sperm production were studied during the spring (December) and autumn (May) in rams of two breeds with different breeding seasons and body weights (Corriedale and Australian Merino) maintained on native pastures and under natural photoperiods in Uruguay. Blood samples were collected at 20-min intervals during a 260-360-min period in 13 rams (four Corriedale, nine Australian Merino) during the late spring and autumn. Rams were weighed and testis size was estimated by orchimetry at each time period. Sperm production was estimated during a 2-week period, 2 months before blood collection and during each week following every blood collection. There was no relationship between testicular size and sperm production measured at the same time, nor between live weight and sperm production. In contrast, testicular volume during the late spring was correlated with sperm production in the autumn (r = 0.65; P = 0.02). The autumn serum LH was higher in Corriedale than in Merino rams. LH pulsatility was unaffected by season, but LH pulse frequency tended to be higher in Corriedale than in Merino rams, particularly in the late spring (2.37 versus 1.56 pulses/6 h; P = 0.08). Serum testosterone concentration was similar in both breeds and seasons. FSH levels were higher in the late spring than in the autumn in both breeds (Corriedale: 2.83 +/- 0.48 versus 2.17 +/- 0.24 ng x mL(-1); Merino: 2.23 +/- 0.24 versus 1.88 +/- 0.17 ng x mL(-1)). FSH and testosterone concentrations during the late spring were positively correlated with autumn sperm production (P = 0.07 and P = 0.03, respectively). In conclusion, the present experiment suggests that LH secretion is not a good parameter for the prediction of sperm production. In contrast, in our conditions (breeds and native pastures) testicular size and testosterone or FSH concentrations from the late spring may be used to predict sperm production in the autumn.

  11. A lot to look forward to

    CERN Multimedia

    2013-01-01

    CERN moves from momentous year to momentous year, and although 2013 will be very different for us than 2012, there is still a lot to look forward to. As I write, the proton-lead run is just getting under way, giving the LHC experiments a new kind of data to investigate. But the run will be short, and our main activity this year will be the start of the LHC’s first long shutdown.   This is the first year I can remember in which all of CERN’s accelerators will be off. The reason is that there is much to be done: the older machines need maintenance, and the LHC has to be prepared for higher energy running. That involves opening up the interconnections between each of the machine’s 1,695 main magnet cryostats, consolidating all of the 10,170 splices carrying current to the main dipole and quadrupole windings, and a range of other work to improve the machine. The CERN accelerator complex will start to come back to life in 2014, and it’s fair to say that when...

  12. EXPLAINING CORPORATE STRUCTURE:THE MD MATRIX, PRODUCT DIFFERENTIATION AND SIZE OF MARKET

    OpenAIRE

    Alessandro Sembenelli; Laura Rondi; Stephen W. Davies

    1995-01-01

    Conventional explanations of diversification and multinationality both point to the existence of intangible assets as a driving force. Using a new database of leading EU firms in 100 NACE 3-digit industries, we devise a classificatory scheme which allows us to analyze multinationality and diversification jointly. We find that product differentiation and home market primary industry size constraints impact differently on different types of diversified firms. For instance, it appears that the c...

  13. Nest predation, clutch size, and physiological costs of egg production in the song sparrow (Melospiza melodia)

    OpenAIRE

    Travers, Marc Simon

    2009-01-01

    We examined the effects of nest predation on both clutch size and the physiological cost of egg production using a clutch removal experiment in free-living song sparrows (Melospiza melodia), inducing “high nest predation” (HNP) females to produce many replacement clutches compared to “low nest predation” (LNP) females. In a preliminary analysis we investigated the utility of multiple measures to assess “physiological condition”, including inter-correlations between physiological traits, sex d...

  14. Productivity, Disturbance and Ecosystem Size Have No Influence on Food Chain Length in Seasonally Connected Rivers

    OpenAIRE

    Warfe, Danielle M.; Jardine, Timothy D.; Pettit, Neil E.; Hamilton, Stephen K.; Pusey, Bradley J.; Bunn, Stuart E.; Davies, Peter M.; Douglas, Michael M.

    2013-01-01

    The food web is one of the oldest and most central organising concepts in ecology and for decades, food chain length has been hypothesised to be controlled by productivity, disturbance, and/or ecosystem size; each of which may be mediated by the functional trophic role of the top predator. We characterised aquatic food webs using carbon and nitrogen stable isotopes from 66 river and floodplain sites across the wet-dry tropics of northern Australia to determine the relative importance of produ...

  15. Retail Productivity: Investigating the Influence of Market Size and Regional Hierarchy

    OpenAIRE

    Öner, Özge

    2014-01-01

    This paper investigates the determinants of the productivity of independent retail stores in Sweden by focusing on the impact of market size and regional hierarchy while controlling for several store and employee characteristics over time. The analysis utilizes Swedish store-level data for the years 2002–2008. To capture the urban-periphery interaction in retail markets, the analysis (i) uses an accessible market potential measure, which captures the impact of the potential demand both in clo...

  16. Influence of vernalization and bulb size on the production of lily cut flowers and lily bulbs

    Directory of Open Access Journals (Sweden)

    Diogo Brito de Almeida

    2017-08-01

    Full Text Available Exposure of bulbs to cold, a physiological phenomenon called vernalization, and bulb size are important factors in the production of lily bulbs and flowers. This study aimed to verify the influence of vernalization of bulbs on flowering cut lily plants, as well as the impact of size and shape of harvest on the production and quality of flowers and bulbs. In turn, the way the stems of the plants used for cut-flower production are cropped is of higher importance for the production of new flower bulbs. In this sense, the experiment was conducted in Viçosa, MG, in a greenhouse in a randomized block design, in split splot scheme with three replications, in which the vernalization periods (25, 35 and 45 days at 4 ± 1 C constituted the plots; bulb sizes (diameters of 3.2-3.8 cm; 2.5-3.2 cm 1.9- and 2.5 cm, subplots and ways to harvest (full harvest of the stem at the required length for the commercial harvest of the flower, commercial stem harvest at the commercial length, maintaining 10cm of stem in the soil; removal of the floral buds as soon as their appearance is observed and harvest at the end of the season, the sub subplots. The bulbs were planted in beds, with 15 x 20 cm spacing. It was evaluated the number of plants that flowered and the number of flowers, the length and the diameter of the floral buds, fresh and dry weights, diameter and plant height as well as number, perimeter and amount of fresh and dry bulbs. There was a decrease in the plant height with the increase of the vernalization period and a reduction of the diameter of the planted bulbs, as well as of the number and the fresh and dry weights of the produced buds. The production of flowers and buds in number, size and weight was directly proportional to the size of the planted bulbs, while the form of harvest with removal of flower buds increased the number, the perimeter and the fresh and dry weights of the buds. Bulbs with diameter between 3.2 - 3.8 cm, stored for 25 days in

  17. Productive variability, border use and plot size in trials with cherry tomato

    Directory of Open Access Journals (Sweden)

    Daniel Santos

    2018-02-01

    Full Text Available ABSTRACT: Knowing the productive variability within protected environments is crucial for choosing the experimental design to be used in that conditions. Thus, the aim of the present study was to assess the variability of fruit production in protected environment cultivated with cherry tomatoes and to verify the border effect and plot size in reducing this variability. To this, data from an uniformity test carried out in a greenhouse with cherry tomato cv. ‘Lili’ were used. Total fresh mass of fruits per plant was considered being these plants arranged in cropping rows parallel to the lateral openings of the greenhouse and also the same plants arranged in columns perpendicular to these openings. To generate the borders, different scenarios were designed by excluding rows and columns and using different plot sizes. In each scenario, homogeneity of variances among the remaining rows and columns was tested. There is no variability of fruit production among rows or columns in trials with cherry tomatoes carried out in greenhouses and the use of border does not bring benefits in terms of reduction of coefficient of variation or reduction of cases of variance heterogeneity among rows or columns. Plots with a size equal to or greater than two plants make possible to use the completely randomized design in the cherry tomato trials in greenhouses.

  18. Productivity, disturbance and ecosystem size have no influence on food chain length in seasonally connected rivers.

    Science.gov (United States)

    Warfe, Danielle M; Jardine, Timothy D; Pettit, Neil E; Hamilton, Stephen K; Pusey, Bradley J; Bunn, Stuart E; Davies, Peter M; Douglas, Michael M

    2013-01-01

    The food web is one of the oldest and most central organising concepts in ecology and for decades, food chain length has been hypothesised to be controlled by productivity, disturbance, and/or ecosystem size; each of which may be mediated by the functional trophic role of the top predator. We characterised aquatic food webs using carbon and nitrogen stable isotopes from 66 river and floodplain sites across the wet-dry tropics of northern Australia to determine the relative importance of productivity (indicated by nutrient concentrations), disturbance (indicated by hydrological isolation) and ecosystem size, and how they may be affected by food web architecture. We show that variation in food chain length was unrelated to these classic environmental determinants, and unrelated to the trophic role of the top predator. This finding is a striking exception to the literature and is the first published example of food chain length being unaffected by any of these determinants. We suggest the distinctive seasonal hydrology of northern Australia allows the movement of fish predators, linking isolated food webs and potentially creating a regional food web that overrides local effects of productivity, disturbance and ecosystem size. This finding supports ecological theory suggesting that mobile consumers promote more stable food webs. It also illustrates how food webs, and energy transfer, may function in the absence of the human modifications to landscape hydrological connectivity that are ubiquitous in more populated regions.

  19. Productivity, disturbance and ecosystem size have no influence on food chain length in seasonally connected rivers.

    Directory of Open Access Journals (Sweden)

    Danielle M Warfe

    Full Text Available The food web is one of the oldest and most central organising concepts in ecology and for decades, food chain length has been hypothesised to be controlled by productivity, disturbance, and/or ecosystem size; each of which may be mediated by the functional trophic role of the top predator. We characterised aquatic food webs using carbon and nitrogen stable isotopes from 66 river and floodplain sites across the wet-dry tropics of northern Australia to determine the relative importance of productivity (indicated by nutrient concentrations, disturbance (indicated by hydrological isolation and ecosystem size, and how they may be affected by food web architecture. We show that variation in food chain length was unrelated to these classic environmental determinants, and unrelated to the trophic role of the top predator. This finding is a striking exception to the literature and is the first published example of food chain length being unaffected by any of these determinants. We suggest the distinctive seasonal hydrology of northern Australia allows the movement of fish predators, linking isolated food webs and potentially creating a regional food web that overrides local effects of productivity, disturbance and ecosystem size. This finding supports ecological theory suggesting that mobile consumers promote more stable food webs. It also illustrates how food webs, and energy transfer, may function in the absence of the human modifications to landscape hydrological connectivity that are ubiquitous in more populated regions.

  20. Benthic algal production across lake size gradients: interactions among morphometry, nutrients, and light.

    Science.gov (United States)

    Vadeboncoeur, Yvonne; Peterson, Garry; Vander Zanden, M Jake; Kalff, Jacob

    2008-09-01

    Attached algae play a minor role in conceptual and empirical models of lake ecosystem function but paradoxically form the energetic base of food webs that support a wide variety of fishes. To explore the apparent mismatch between perceived limits on contributions of periphyton to whole-lake primary production and its importance to consumers, we modeled the contribution of periphyton to whole-ecosystem primary production across lake size, shape, and nutrient gradients. The distribution of available benthic habitat for periphyton is influenced by the ratio of mean depth to maximum depth (DR = z/ z(max)). We modeled total phytoplankton production from water-column nutrient availability, z, and light. Periphyton production was a function of light-saturated photosynthesis (BPmax) and light availability at depth. The model demonstrated that depth ratio (DR) and light attenuation strongly determined the maximum possible contribution of benthic algae to lake production, and the benthic proportion of whole-lake primary production (BPf) declined with increasing nutrients. Shallow lakes (z benthic or pelagic primary productivity depending on trophic status. Moderately deep oligotrophic lakes had substantial contributions by benthic primary productivity at low depth ratios and when maximum benthic photosynthesis was moderate or high. Extremely large, deep lakes always had low fractional contributions of benthic primary production. An analysis of the world's largest lakes showed that the shapes of natural lakes shift increasingly toward lower depth ratios with increasing depth, maximizing the potential importance of littoral primary production in large-lake food webs. The repeatedly demonstrated importance of periphyton to lake food webs may reflect the combination of low depth ratios and high light penetration characteristic of large, oligotrophic lakes that in turn lead to substantial contributions of periphyton to autochthonous production.

  1. SIZE DISTRIBUTION AND RATE OF PRODUCTION OF AIRBORNE PARTICULATE MATTER GENERATED DURING METAL CUTTING

    International Nuclear Information System (INIS)

    Ebadian, M.A.; Dua, S.K.; Hillol Guha

    2001-01-01

    During deactivation and decommissioning activities, thermal cutting tools, such as plasma torch, laser, and gasoline torch, are used to cut metals. These activities generate fumes, smoke and particulates. These airborne species of matter, called aerosols, may be inhaled if suitable respiratory protection is not used. Inhalation of the airborne metallic aerosols has been reported to cause ill health effects, such as acute respiratory syndrome and chromosome damage in lymphocytes. In the nuclear industry, metals may be contaminated with radioactive materials. Cutting these metals, as in size reduction of gloveboxes and tanks, produces high concentrations of airborne transuranic particles. Particles of the respirable size range (size < 10 microm) deposit in various compartments of the respiratory tract, the fraction and the site in the respiratory tract depending on the size of the particles. The dose delivered to the respiratory tract depends on the size distribution of the airborne particulates (aerosols) and their concentration and radioactivity/toxicity. The concentration of airborne particulate matter in an environment is dependent upon the rate of their production and the ventilation rate. Thus, measuring aerosol size distribution and generation rate is important for (1) the assessment of inhalation exposures of workers, (2) the selection of respiratory protection equipment, and (3) the design of appropriate filtration systems. Size distribution of the aerosols generated during cutting of different metals by plasma torch was measured. Cutting rates of different metals, rate of generation of respirable mass, as well as the fraction of the released kerf that become respirable were determined. This report presents results of these studies. Measurements of the particles generated during cutting of metal plates with a plasma arc torch revealed the presence of particles with mass median aerodynamic diameters of particles close to 0.2 micro

  2. An economic lot and delivery scheduling problem with the fuzzy shelf life in a flexible job shop with unrelated parallel machines

    Directory of Open Access Journals (Sweden)

    S. Dousthaghi

    2012-08-01

    Full Text Available This paper considers an economic lot and delivery scheduling problem (ELDSP in a fuzzy environment with the fuzzy shelf life for each product. This problem is formulated in a flexible job shop with unrelated parallel machines, when the planning horizon is finite and it determines lot sizing, scheduling and sequencing, simultaneously. The proposed model of this paper is based on the basic period (BP approach. In this paper, a mixed-integer nonlinear programming (MINLP model is presented and then it is changed into two models in the fuzzy shelf life. The main model is dependent to the multiple basic periods and it is difficult to solve the resulted proposed model for large-scale problems in reasonable amount of time; thus, an efficient heuristic method is proposed to solve the problem. The performance of the proposed model is demonstrated using some numerical examples.

  3. Forming of the dynamics of the changes in convergent production system depending on size of production party

    Directory of Open Access Journals (Sweden)

    Bożena Zwolińska

    2017-09-01

    Full Text Available Background: In terms of Lean Six Sigma, the whole process focuses on clients and their needs. Existence of a client generates the supply of companies. Extended customization has a negative impact for a structure of the production system. Dynamics of changes and no predictability of system’s state in time t+1 lead to increase of the operational costs. It particularly affects those companies which are producing goods using MTO (make – to – order method in short series. The goal of this article is to establish a mathematical model defining how the structure of a production system is subject to change depending on the volume of the production batch for a production system in accordance with MTO. Furthermore pilot calculations have been presented which determine the probability value, how subsequent random variables are contained within three standard deviations (±3δ from the determined expected value (ET for the entire production structure. Months of analysis and research on introducing selected lean toolbox components to a polish company from the small and medium enterprises sector resulted in the models presented in the article. The production structure of the discussed actual facility is complex and is of converged nature in accordance with MTO, while the final products are manufactured in short production series with a relatively wide customization options. Materials and results: Wrought models consider theories of  Klir and Maserovicz [Mesarovic 1964] and also theory of mass operation (one of the probability areas.  In the article there are results from two models which are fundamental in defining problems in logistics engineering and production in scientific research. Important attribute of presented models is a fact that they consider relations between variables in a structure of consecutive processes and also consider relations between a size of production party and a real object. Presented models are not only theoretical coverage

  4. Statistical validation of reagent lot change in the clinical chemistry laboratory can confer insights on good clinical laboratory practice.

    Science.gov (United States)

    Cho, Min-Chul; Kim, So Young; Jeong, Tae-Dong; Lee, Woochang; Chun, Sail; Min, Won-Ki

    2014-11-01

    Verification of new lot reagent's suitability is necessary to ensure that results for patients' samples are consistent before and after reagent lot changes. A typical procedure is to measure results of some patients' samples along with quality control (QC) materials. In this study, the results of patients' samples and QC materials in reagent lot changes were analysed. In addition, the opinion regarding QC target range adjustment along with reagent lot changes was proposed. Patients' sample and QC material results of 360 reagent lot change events involving 61 analytes and eight instrument platforms were analysed. The between-lot differences for the patients' samples (ΔP) and the QC materials (ΔQC) were tested by Mann-Whitney U tests. The size of the between-lot differences in the QC data was calculated as multiples of standard deviation (SD). The ΔP and ΔQC values only differed significantly in 7.8% of the reagent lot change events. This frequency was not affected by the assay principle or the QC material source. One SD was proposed for the cutoff for maintaining pre-existing target range after reagent lot change. While non-commutable QC material results were infrequent in the present study, our data confirmed that QC materials have limited usefulness when assessing new reagent lots. Also a 1 SD standard for establishing a new QC target range after reagent lot change event was proposed. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  5. Microphysical Parameterizations for NWP: It's All About the Sizes and Production Pathways of Hydrometeors

    Science.gov (United States)

    Michelson, Sara A.; Bao, Jian-Wen; Grell, Evelyn D.

    2017-04-01

    Bulk microphysical parameterization schemes are popularly used in numerical weather prediction (NWP) models to simulate clouds and precpitation. These schemes are based on assumed number distribution functions for individual hydrometeor species, which are integratable over size distributions of diameters from zero to infinity. Typically, hydrometeor mass and number mixing ratios are predicted in these schemes. Some schemes also predict a third parameter of hydrometeor distribution characteristics. In this study, four commonly-used microphysics schemes of various complexity that are available in the Weather Research and Forecasting Model (WRF) are investigated and compared using numerical model simulations of an idealized 2-D squall line and microphysics budget analysis. Diagnoses of the parameterized pathways for hydrometeor production reveal that the differences related to the assumptions of hydrometeor size distributions between the schemes lead to the differences in the simulations due to the net effect of various microphysical processes on the interaction between latent heating/evaporative cooling and flow dynamics as the squall line develops. Results from this study also highlight the possibility that the advantage of double-moment formulations can be overshadowed by the uncertainties in the spectral definition of individual hydrometeor categories and spectrum-dependent microphysical processes. It is concluded that the major differences between the schemes investigated here are in the assumed hydrometeor size distributions and pathways for their production.

  6. Stocking density effects on production characteristics and body composition of market size cobia, Rachycentron canadum, reared in recirculating aquaculture systems

    Science.gov (United States)

    Production density in excess of a critical threshold can result in a negative relationship between stocking density and fish production. This study was conducted to evaluate production characteristics of juvenile cobia Rachycentron canadum, reared to market size in production-scale recirculating aq...

  7. Preparing the Production of a New Product in Small and Medium-Sized Enterprises by Using the Method of Projects Management

    Science.gov (United States)

    Bijańska, Jolanta; Wodarski, Krzysztof; Wójcik, Janusz

    2016-06-01

    Efficient and effective preparation the production of new products is important requirement for a functioning and development of small and medium-sized enterprises. One of the methods, which support the fulfilment of this condition is project management. This publication presents the results of considerations, which are aimed at developing a project management model of preparation the production of a new product, adopted to specificity of small and medium-sized enterprises.

  8. On-Chip Production of Size-Controllable Liquid Metal Microdroplets Using Acoustic Waves.

    Science.gov (United States)

    Tang, Shi-Yang; Ayan, Bugra; Nama, Nitesh; Bian, Yusheng; Lata, James P; Guo, Xiasheng; Huang, Tony Jun

    2016-07-01

    Micro- to nanosized droplets of liquid metals, such as eutectic gallium indium (EGaIn) and Galinstan, have been used for developing a variety of applications in flexible electronics, sensors, catalysts, and drug delivery systems. Currently used methods for producing micro- to nanosized droplets of such liquid metals possess one or several drawbacks, including the lack in ability to control the size of the produced droplets, mass produce droplets, produce smaller droplet sizes, and miniaturize the system. Here, a novel method is introduced using acoustic wave-induced forces for on-chip production of EGaIn liquid-metal microdroplets with controllable size. The size distribution of liquid metal microdroplets is tuned by controlling the interfacial tension of the metal using either electrochemistry or electrocapillarity in the acoustic field. The developed platform is then used for heavy metal ion detection utilizing the produced liquid metal microdroplets as the working electrode. It is also demonstrated that a significant enhancement of the sensing performance is achieved by introducing acoustic streaming during the electrochemical experiments. The demonstrated technique can be used for developing liquid-metal-based systems for a wide range of applications. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Lot No. 1 of Frit 202 for DWPF cold runs

    International Nuclear Information System (INIS)

    Schumacher, R.F.

    1993-01-01

    This report was prepared at the end of 1992 and summarizes the evaluation of the first lot sample of DWPF Frit 202 from Cataphote Inc. Publication of this report was delayed until the results from the carbon analyses could be included. To avoid confusion the frit specifications presented in this report were those available at the end of 1992. The specifications were slightly modified early in 1993. The frit was received and evaluated for moisture, particle size distribution, organic-inorganic carbon and chemical composition. Moisture content and particle size distribution were determined on a representative sample at SRTC. These properties were within the DWPF specifications for Frit 202. A representative sample was submitted to Corning Engineering Laboratory Services for chemical analyses. The sample was split and two dissolutions prepared. Each dissolution was analyzed on two separate days. The results indicate that there is a high probability (>95%) that the silica content of this frit is below the specification limit of 77.0 ± 1.0 wt %. The average of the four analyzed values was 75.1 wt % with a standard deviation of 0.28 wt %. All other oxides were within the elliptical two sigma limits. Control standard frit samples were submitted and analyzed at the same time and the results were very similar to previous analyses of these materials

  10. The effect of backroom size on retail product availability – operational and technological solutions

    Directory of Open Access Journals (Sweden)

    Nikola Milićević

    2015-05-01

    Full Text Available Amid the conditions of increasingly fierce competition, retailers are doing their best to meet the demands of their customers as efficiently as possible. Through the ever-growing level of product availability they raise the quality of service, which is positively reflected not only on the growth in sales, but also customer satisfaction. In the opposite case, the out-ofstock problem emerges, affecting not only customers, but also retailers and their suppliers. Bearing in mind, that the causes of the given problem occur most frequently in the last metres of the supply chain, in this paper we investigated the effect of backroom size on product availability, depending on the retail format. For this purpose, we used moderated regression analysis on the sample of 80 fast moving consumer goods in retail stores located on the territory of the Republic of Serbia. The obtained results pointed to opposite movements in the smallest and the largest format. Whereas in superettes the out-of-stock level lowers with the increase in the backroom size, it tends to drop in hypermarkets. Therefore, we pointed to some in-store problems that cause product stock-outs in different store formats. In addition to indicating the potential causes of analyzed relations, this paper also presents certain operational and technological solutions related to their mitigation.

  11. The detection and measurement of the electrical mobility size distributions associated with radon decay products

    International Nuclear Information System (INIS)

    Fei, Lin.

    1996-04-01

    The potential risk of lung cancer has evoked interest in the properties of radon decay products. There are two forms of this progeny: either attached to ambient aerosols, or still in the status of ions/molecules/small clusters. This ''unattached'' activity would give a higher dose per unit of airborne activity than the ''attached'' progeny that are rather poorly deposited. In this thesis, a system for determining unattached radon decay products electrical mobility size distribution by measuring their electrical mobilities was developed, based on the fact that about 88% of 218 Po atoms have unit charge at the end of their recoil after decay from 222 Rn, while the remainder are neutral. Essential part of the setup is the radon-aerosol chamber with the Circular Electrical Mobility Spectrometer (CEMS) inside. CEMS is used for sampling and classifying the charged radioactive clusters produced in the chamber. An alpha- sensitive plastic, CR-39 disk, is placed in CEMS as an inlaid disk electrode and the alpha particle detector. CEMS showed good performance in fine inactive particles' classification. If it also works well for radon decay products, it can offer a convenient size distribution measurement for radioactive ultrafine particles. However, the experiments did not obtain an acceptable resolution. Suggestions are made for solving this problem

  12. Emission characteristics and size distribution of polycyclic aromatic hydrocarbons from coke production in China

    Science.gov (United States)

    Mu, Ling; Peng, Lin; Liu, Xiaofeng; He, Qiusheng; Bai, Huiling; Yan, Yulong; Li, Yinghui

    2017-11-01

    Coking is regarded as a major source of atmospheric polycyclic aromatic hydrocarbons (PAHs), but few researches have been conducted on the emission characteristics of PAHs from coke production. In this study, emissions of size-segregated particulate matter (PM) and particle-bound PAHs emitted from charging of coal (CC) and pushing of coke (PC) in four typical coke plants were determined. The emission factors on average, sums of CC and PC, were 4.65 mg/kg, 5.96 mg/kg, 19.18 μg/kg and 20.69 μg/kg of coal charged for PM2.1 (≤ 2.1 μm), PM, PAHs in PM2.1 and total-PAHs, respectively. PM and PAHs emission from plants using stamp charging were significantly more than those using top charging. The profile of PAHs in PM with size ≤ 1.4 μm (PM1.4) emitted from CC process were similar with that from PC, however, it revealed obviously different tendency for PAHs in PM with size > 1.4 μm, indicating the different formation mechanism for coarse particles emitted from CC and PC. Size distributions of PM and PAHs indicated that they were primarily connected with PM1.4, and the contributions of PM1.4 to PM and PAHs emitted from the plants using stamp charging were higher than those using top charging. Some improved technology in air-pollution control devices should be considered in coke production in future based on the considerable impacts of PM1.4 and PAHs on human health and ambient air quality.

  13. Eutrophication effects on phytoplankton size-fractioned biomass and production at a tropical estuary.

    Science.gov (United States)

    Guenther, Mariana; Araújo, Moacyr; Flores-Montes, Manuel; Gonzalez-Rodriguez, Eliane; Neumann-Leitão, Sigrid

    2015-02-28

    Size-fractioned phytoplankton (pico, nano and microplankton) biomass and production were estimated throughout a year at Recife harbor (NE Brazil), a shallow well mixed tropical hypereutrophic estuary with short residence times but restricted water renewal. Intense loads of P-PO4 (maximum 14 μM) resulted in low N:P ratios (around 2:1), high phytoplankton biomass (B=7.1-72 μg chl-a L(-1)), production (PP=10-2657 μg C L(-1) h(-1)) and photosynthetic efficiency (P(B)=0.5-45 μg C μg chl-a(-1)), but no oxygen depletion (average O2 saturation: 109.6%). Nanoplankton dominated phytoplankton biomass (66%) but micro- and nanoplankton performed equivalent primary production rates (47% each). Production-biomass models indicate an export of the exceeding microplankton biomass during most of the year, possibly through grazing. The intense and constant nutrient and organic matter loading at Recife harbor is thus supporting the high microplankton productivity that is not accumulating on the system nor contributing to oxygen depletion, but supporting the whole system's trophic web. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Plasma-arc reactor for production possibility of powdered nano-size materials

    International Nuclear Information System (INIS)

    Hadzhiyski, V; Mihovsky, M; Gavrilova, R

    2011-01-01

    Nano-size materials of various chemical compositions find increasing application in life nowadays due to some of their unique properties. Plasma technologies are widely used in the production of a range of powdered nano-size materials (metals, alloys, oxides, nitrides, carbides, borides, carbonitrides, etc.), that have relatively high melting temperatures. Until recently, the so-called RF-plasma generated in induction plasma torches was most frequently applied. The subject of this paper is the developments of a new type of plasma-arc reactor, operated with transferred arc system for production of disperse nano-size materials. The new characteristics of the PLASMALAB reactor are the method of feeding the charge, plasma arc control and anode design. The disperse charge is fed by a charge feeding system operating on gravity principle through a hollow cathode of an arc plasma torch situated along the axis of a water-cooled wall vertical tubular reactor. The powdered material is brought into the zone of a plasma space generated by the DC rotating transferred plasma arc. The arc is subjected to Auto-Electro-Magnetic Rotation (AEMR) by an inductor serially connected to the anode circuit. The anode is in the form of a water-cooled copper ring. It is mounted concentrically within the cylindrical reactor, with its lower part electrically insulated from it. The electric parameters of the arc in the reactor and the quantity of processed charge are maintained at a level permitting generation of a volumetric plasma discharge. This mode enables one to attain high mean mass temperature while the processed disperse material flows along the reactor axis through the plasma zone where the main physico-chemical processes take place. The product obtained leaves the reactor through the annular anode, from where it enters a cooling chamber for fixing the produced nano-structure. Experiments for AlN synthesis from aluminium power and nitrogen were carried out using the plasma reactor

  15. Mentha spicata L. infusions as sources of antioxidant phenolic compounds: emerging reserve lots with special harvest requirements.

    Science.gov (United States)

    Rita, Ingride; Pereira, Carla; Barros, Lillian; Santos-Buelga, Celestino; Ferreira, Isabel C F R

    2016-10-12

    Mentha spicata L., commonly known as spearmint, is widely used in both fresh and dry forms, for infusion preparation or in European and Indian cuisines. Recently, with the evolution of the tea market, several novel products with added value are emerging, and the standard lots have evolved to reserve lots, with special harvest requirements that confer them with enhanced organoleptic and sensorial characteristics. The apical leaves of these batches are collected in specific conditions having, then, a different chemical profile. In the present study, standard and reserve lots of M. spicata were assessed in terms of the antioxidants present in infusions prepared from the different lots. The reserve lots presented the highest concentration in all the compounds identified in relation to the standard lots, with 326 and 188 μg mL -1 of total phenolic compounds, respectively. Both types of samples presented rosmarinic acid as the most abundant phenolic compound, at concentrations of 169 and 101 μg mL -1 for reserve and standard lots, respectively. The antioxidant activity was higher in the reserve lots which had the highest total phenolic compounds content, with EC 50 values ranging from 152 to 336 μg mL -1 . The obtained results provide scientific information that may allow the consumer to make a conscientious choice.

  16. 7 CFR 983.152 - Failed lots/rework procedure.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Failed lots/rework procedure. 983.152 Section 983.152..., ARIZONA, AND NEW MEXICO Rules and Regulations § 983.152 Failed lots/rework procedure. (a) Inshell rework procedure for aflatoxin. If inshell rework is selected as a remedy to meet the aflatoxin regulations of this...

  17. 7 CFR 33.7 - Less than carload lot.

    Science.gov (United States)

    2010-01-01

    ... Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... ISSUED UNDER AUTHORITY OF THE EXPORT APPLE ACT Definitions § 33.7 Less than carload lot. Less than carload lot means a quantity of apples in packages not exceeding 20,000 pounds gross weight or 400...

  18. [The certification of advanced therapy medicinal products. A quality label for product development in small and medium-sized enterprises].

    Science.gov (United States)

    Berger, A; Schüle, S; Flory, E

    2011-07-01

    Advanced therapy medicinal products (ATMPs) are gene therapy, cell therapy, and tissue engineered products. To gain access to the market within the European Union, ATMPs must be authorized by the European Commission (EC). Especially for small and medium-sized enterprises (SMEs), the European centralized procedure of marketing authorization that is conducted by the European Medicines Agency (EMA) constitutes a major challenge, because SMEs often have little experience with regulatory procedures and many have limited financial possibilities. To tackle these challenges, a certification procedure exclusively for SMEs and their ATMP development was introduced by the EC. Independently from a marketing authorization application, development and/or production processes can be certified. An issued certificate demonstrates that the respective process meets the current regulatory and scientific requirements of the EMA, representing a valuable milestone for putative investors and licensees. This article highlights the background, the detailed procedure, the minimum requirements, as well as the costs of certification, while giving further noteworthy guidance for interested parties.

  19. Energy saving cement production by grain size optimisation of the raw meal

    Directory of Open Access Journals (Sweden)

    B. Simons

    Full Text Available The production of cement clinker is an energy consuming process. At about 50% of the energy is associated with grinding and milling of the raw meal, that normally is in the range 100% <200 μm with 90% <90 μm. Question: is it possible to use coarser components of the raw meal without reducing the clinker quality. With synthetic raw meals of various grain sizes the clinker formation was studied at static (1100 - 1450°C and dynamic conditions (heating microscope. A routine to adjust the grain size of the components for industrial raw meals is developed. The fine fraction <90 μm should mainly contain the siliceous and argileous components, whereas the calcitic component can be milled separately to a grain size between 200-500 μm, resulting in lower energy consumption for milling. Considering the technical and economical realizability the relation fine/coarse should be roughly 1:1. The energy for milling can be reduced significantly, that in addition leads to the preservation of natural energy resources.

  20. Productivity, trophic levels and size spectra of zooplankton in northern Norwegian shelf regions

    Science.gov (United States)

    Zhou, Meng; Tande, Kurt S.; Zhu, Yiwu; Basedow, Sünnje

    2009-10-01

    Many studies have been conducted in northern Norwegian shelf regions to assess distributions and abundances of zooplankton in the last decade using towed Scanfish-conductivity, temperature and depth sensors (CTD)-optical plankton counter (OPC), and plankton nets. Significant progresses have been made in understanding dominant species, life histories and behavior, and in using size-structured data to identify dominant species in a certain size range. Using these Scanfish-CTD-OPC data, the analysis of zooplankton community size structures, compositions and their relationships with water types is made along the shelf region from Lofoten, North Cape to Varangerfjorden. From the relationships between the water types and zooplankton communities, the transports and exchanges of zooplankton communities between the Norwegian Coastal and Norwegian Atlantic Waters in regions near Malangsgrunnen and Nordvestbanken are examined. The biovolume (biomass) spectra are further analyzed for the productivity, trophic levels and seasonality of communities in these regions, indicating a steeper slope of the biovolume spectrum for a community dominated by herbivorous species in spring and a flatter slope for a community dominated by carnivorous-omnivorous species in winter. The comparison with the zooplankton biovolume spectra obtained in areas west of Antarctic Peninsula is made to examine and understand the differences in the zooplankton biovolume spectra, their trophic dynamics and potential human impacts between different regions.

  1. Hydrogen production system from photovoltaic panels: experimental characterization and size optimization

    International Nuclear Information System (INIS)

    Ferrari, M.L.; Rivarolo, M.; Massardo, A.F.

    2016-01-01

    Highlights: • Plant optimization for hydrogen generation from renewable sources. • Experimental tests on a 42 kW alkaline electrolyser. • Time-dependent hierarchical thermo-economic optimization. • Italian case for electricity costs and solar irradiation (Savona). - Abstract: In this paper an approach for the determination of the optimal size and management of a plant for hydrogen production from renewable source (photovoltaic panels) is presented. Hydrogen is produced by a pressurized alkaline electrolyser (42 kW) installed at the University Campus of Savona (Italy) in 2014 and fed by electrical energy produced by photovoltaic panels. Experimental tests have been carried out in order to analyze the performance curve of the electrolyser in different operative conditions, investigating the influence of the different parameters on the efficiency. The results have been implemented in a software tool in order to describe the behavior of the systems in off-design conditions. Since the electrical energy produced by photovoltaic panels and used to feed the electrolyser is strongly variable because of the random nature of the solar irradiance, a time-dependent hierarchical thermo-economic analysis is carried out to evaluate both the optimal size and the management approach related to the system, considering a fixed size of 1 MW for the photovoltaic panels. The thermo-economic analysis is performed with the software tool W-ECoMP, developed by the authors’ research group: the Italian energy scenario is considered, investigating the impact of electricity cost on the results as well.

  2. Influence of Production System, Sex and Litter Size on Growth Rates in Turcana Lambs

    Directory of Open Access Journals (Sweden)

    Dinu Gavojdian

    2013-10-01

    Full Text Available Lamb meat production has become the main source of income in the Romanian sheep farming industry, representing over 66% of the total returns. Turcana breed represents over 70% of the national flock, and 92% of the sheep bred in western Romania. However, meat production potential and growth rates of the breed are low, and thus strategies to improve performance of the Turcana lambs need to be identified. Aim of the current research was to evaluate the effects that sex and litter size have on the growth rates of lambs from Turcana breed under extensive and semi-intensive production systems. Weaning weight was significantly (p≤0.001 influenced by the production system, with lambs reared extensively registering a average body weights of 18.23±0.094 kg at the age of 90 days, while the semi-intensively reared lambs registered an average weight of 20.19±0.082 kg. It was concluded that all three factors taken into study significantly influence growth rates in Turcana lambs and that weight of the lamb(s at the age of 28 days should be included as a selection trait within the Turcana breed genetic improvement plan.

  3. Effects of ultraviolet radiation on rates and size distribution of primary production by Lake Erie phytoplankton

    International Nuclear Information System (INIS)

    Hiriart, V.P.; Greenberg, B.M.; Guildford, S.J.; Smith, R.E.H.

    2002-01-01

    The impact of natural solar ultraviolet radiation (UVR), particularly UVB (297-320 nm), on phytoplankton primary production in Lake Erie was investigated during the spring and summer of 1997. Radiocarbon incorporation and size-selective filtration was used to trace total production and its distribution among particulate and dissolved pools. On average, 1-h exposures produced half the UVB-dependent inhibition of total production realized in 8-h exposures, indicating rapid kinetics of photoinhibition. Cumulative UVB-dependent photoinhibition averaged 36% in 8-h simulated surface exposures. The efficiency of photoinhibition was greater for N-deficient than N-replete communities, but was not related to phytoplankton light history, P limitation, or the dominant genera. The proportion of recently fixed carbon occurring in the dissolved pool after 8-h exposures was significantly greater in higher-UVB treatments, whereas the share in picoplankton (<2 μm) was significantly lower. Significant UVB-dependent inhibition of total production was limited on average to relatively severe exposures, but the rapid kinetics of inhibition and the apparent effects on the allocation of carbon suggest it may be important to the lake's food web. Differences in optical properties and thermal stratification patterns suggested that the relatively turbid west basin was potentially more susceptible to UVR photoinhibition than the more transparent east or central basins. (author)

  4. Process optimization at small and medium-sized enterprises: production of small and medium-sized batches

    Science.gov (United States)

    Stettmer, J.

    2017-06-01

    The organization of a company needs to refer to the production process and especially to the number of employees. Many enterprises which are growing, are primarily focused on the development of the technology and not on the development of the organization. This ends up in an increase of the turnover but in a reduced margin. For the development of the organization in growing companies there are two things necessary. The development of the staff to work systematically and coordinated in teams as well as the flow of the information and material between the teams. ERP - systems are required to install the material and information flow especially in the work floor. Unfortunately many enterprises don't use the ERP-systems to plan and control the material and information flow very detailed. In companies where the control of the material and information flow was installed, it could be demonstrated that the margin increased analog to it. The requirements to the development of the organization based on the increasing number of the employees are basically the same for most of the production processes like the production of metal sheet housings or the production of mirrors and lenses.

  5. Cluster size selectivity in the product distribution of ethene dehydrogenation on niobium clusters.

    Science.gov (United States)

    Parnis, J Mark; Escobar-Cabrera, Eric; Thompson, Matthew G K; Jacula, J Paul; Lafleur, Rick D; Guevara-García, Alfredo; Martínez, Ana; Rayner, David M

    2005-08-18

    Ethene reactions with niobium atoms and clusters containing up to 25 constituent atoms have been studied in a fast-flow metal cluster reactor. The clusters react with ethene at about the gas-kinetic collision rate, indicating a barrierless association process as the cluster removal step. Exceptions are Nb8 and Nb10, for which a significantly diminished rate is observed, reflecting some cluster size selectivity. Analysis of the experimental primary product masses indicates dehydrogenation of ethene for all clusters save Nb10, yielding either Nb(n)C2H2 or Nb(n)C2. Over the range Nb-Nb6, the extent of dehydrogenation increases with cluster size, then decreases for larger clusters. For many clusters, secondary and tertiary product masses are also observed, showing varying degrees of dehydrogenation corresponding to net addition of C2H4, C2H2, or C2. With Nb atoms and several small clusters, formal addition of at least six ethene molecules is observed, suggesting a polymerization process may be active. Kinetic analysis of the Nb atom and several Nb(n) cluster reactions with ethene shows that the process is consistent with sequential addition of ethene units at rates corresponding approximately to the gas-kinetic collision frequency for several consecutive reacting ethene molecules. Some variation in the rate of ethene pick up is found, which likely reflects small energy barriers or steric constraints associated with individual mechanistic steps. Density functional calculations of structures of Nb clusters up to Nb(6), and the reaction products Nb(n)C2H2 and Nb(n)C2 (n = 1...6) are presented. Investigation of the thermochemistry for the dehydrogenation of ethene to form molecular hydrogen, for the Nb atom and clusters up to Nb6, demonstrates that the exergonicity of the formation of Nb(n)C2 species increases with cluster size over this range, which supports the proposal that the extent of dehydrogenation is determined primarily by thermodynamic constraints. Analysis of

  6. Interlayer catalytic exfoliation realizing scalable production of large-size pristine few-layer graphene

    Science.gov (United States)

    Geng, Xiumei; Guo, Yufen; Li, Dongfang; Li, Weiwei; Zhu, Chao; Wei, Xiangfei; Chen, Mingliang; Gao, Song; Qiu, Shengqiang; Gong, Youpin; Wu, Liqiong; Long, Mingsheng; Sun, Mengtao; Pan, Gebo; Liu, Liwei

    2013-01-01

    Mass production of reduced graphene oxide and graphene nanoplatelets has recently been achieved. However, a great challenge still remains in realizing large-quantity and high-quality production of large-size thin few-layer graphene (FLG). Here, we create a novel route to solve the issue by employing one-time-only interlayer catalytic exfoliation (ICE) of salt-intercalated graphite. The typical FLG with a large lateral size of tens of microns and a thickness less than 2 nm have been obtained by a mild and durative ICE. The high-quality graphene layers preserve intact basal crystal planes owing to avoidance of the degradation reaction during both intercalation and ICE. Furthermore, we reveal that the high-quality FLG ensures a remarkable lithium-storage stability (>1,000 cycles) and a large reversible specific capacity (>600 mAh g-1). This simple and scalable technique acquiring high-quality FLG offers considerable potential for future realistic applications.

  7. Adipokines and their relation to maternal energy substrate production, insulin resistance and fetal size.

    Science.gov (United States)

    Ahlsson, Fredrik; Diderholm, Barbro; Ewald, Uwe; Jonsson, Björn; Forslund, Anders; Stridsberg, Mats; Gustafsson, Jan

    2013-05-01

    The role of adipokines in the regulation of energy substrate production in non-diabetic pregnant women has not been elucidated. We hypothesize that serum concentrations of adiponectin are related to fetal growth via maternal fat mass, insulin resistance and glucose production, and further, that serum levels of leptin are associated with lipolysis and that this also influences fetal growth. Hence, we investigated the relationship between adipokines, energy substrate production, insulin resistance, body composition and fetal weight in non-diabetic pregnant women in late gestation. Twenty pregnant women with normal glucose tolerance were investigated at 36 weeks of gestation at Uppsala University Hospital. Levels of adipokines were related to rates of glucose production and lipolysis, maternal body composition, insulin resistance, resting energy expenditure and estimated fetal weights. Rates of glucose production and lipolysis were estimated by stable isotope dilution technique. Median (range) rate of glucose production was 805 (653-1337) μmol/min and that of glycerol production, reflecting lipolysis, was 214 (110-576) μmol/min. HOMA insulin resistance averaged 1.5 ± 0.75 and estimated fetal weights ranged between 2670 and 4175 g (-0.2 to 2.7 SDS). Mean concentration of adiponectin was 7.2 ± 2.5mg/L and median level of leptin was 47.1 (9.9-58.0) μg/L. Adiponectin concentrations (7.2 ± 2.5mg/L) correlated inversely with maternal fat mass, insulin resistance, glucose production and fetal weight, r=-0.50, pinsulin resistance, r=0.76, pinsulin resistance as well as endogenous glucose production rates indicate that low levels of adiponectin in obese pregnant women may represent one mechanism behind increased fetal size. Maternal levels of leptin are linked to maternal fat mass and its metabolic consequences, but the data indicate that leptin lacks a regulatory role with regard to maternal lipolysis in late pregnancy. Copyright © 2012 Elsevier Ireland Ltd. All rights

  8. Effects of grain size and grain boundaries on defect production in nanocrystalline 3C-SiC

    International Nuclear Information System (INIS)

    Swaminathan, N.; Kamenski, Paul J.; Morgan, Dane; Szlufarska, Izabela

    2010-01-01

    Cascade simulations in single crystal and nanocrystalline SiC have been conducted in order to determine the role of grain boundaries and grain size on defect production during primary radiation damage. Cascades are performed with 4 and 10 keV silicon as the primary knock-on atom (PKA). Total defect production is found to increase with decreasing grain size, and this effect is shown to be due to increased production in grain boundaries and changing grain boundary volume fraction. In order to consider in-grain defect production, a new mapping methodology is developed to properly normalize in-grain defect production rates for nanocrystalline materials. It is shown that the presence of grain boundaries does not affect the total normalized in-grain defect production significantly (the changes are lower than ∼20%) for the PKA energies considered. Defect production in the single grain containing the PKA is also studied and found to increase for smaller grain sizes. In particular, for smaller grain sizes the defect production decreases with increasing distance from the grain boundary while for larger grain sizes the presence of the grain boundaries has negligible effect on defect production. The results suggest that experimentally observed changes in radiation resistance of nanocrystalline materials may be due to long-term damage evolution rather than changes in defect production rates from primary damage.

  9. A non-permutation flowshop scheduling problem with lot streaming: A Mathematical model

    Directory of Open Access Journals (Sweden)

    Daniel Rossit

    2016-06-01

    Full Text Available In this paper we investigate the use of lot streaming in non-permutation flowshop scheduling problems. The objective is to minimize the makespan subject to the standard flowshop constraints, but where it is now permitted to reorder jobs between machines. In addition, the jobs can be divided into manageable sublots, a strategy known as lot streaming. Computational experiments show that lot streaming reduces the makespan up to 43% for a wide range of instances when compared to the case in which no job splitting is applied. The benefits grow as the number of stages in the production process increases but reach a limit. Beyond a certain point, the division of jobs into additional sublots does not improve the solution.

  10. Extending cluster lot quality assurance sampling designs for surveillance programs.

    Science.gov (United States)

    Hund, Lauren; Pagano, Marcello

    2014-07-20

    Lot quality assurance sampling (LQAS) has a long history of applications in industrial quality control. LQAS is frequently used for rapid surveillance in global health settings, with areas classified as poor or acceptable performance on the basis of the binary classification of an indicator. Historically, LQAS surveys have relied on simple random samples from the population; however, implementing two-stage cluster designs for surveillance sampling is often more cost-effective than simple random sampling. By applying survey sampling results to the binary classification procedure, we develop a simple and flexible nonparametric procedure to incorporate clustering effects into the LQAS sample design to appropriately inflate the sample size, accommodating finite numbers of clusters in the population when relevant. We use this framework to then discuss principled selection of survey design parameters in longitudinal surveillance programs. We apply this framework to design surveys to detect rises in malnutrition prevalence in nutrition surveillance programs in Kenya and South Sudan, accounting for clustering within villages. By combining historical information with data from previous surveys, we design surveys to detect spikes in the childhood malnutrition rate. Copyright © 2014 John Wiley & Sons, Ltd.

  11. Record Dynamics and the Parking Lot Model for granular dynamics

    Science.gov (United States)

    Sibani, Paolo; Boettcher, Stefan

    Also known for its application to granular compaction (E. Ben-Naim et al., Physica D, 1998), the Parking Lot Model (PLM) describes the random parking of identical cars in a strip with no marked bays. In the thermally activated version considered, cars can be removed at an energy cost and, in thermal equilibrium, their average density increases as temperature decreases. However, equilibration at high density becomes exceedingly slow and the system enters an aging regime induced by a kinematic constraint, the fact that parked cars may not overlap. As parking an extra car reduces the available free space,the next parking event is even harder to achieve. Records in the number of parked cars mark the salient features of the dynamics and are shown to be well described by the log-Poisson statistics known from other glassy systems with record dynamics. Clusters of cars whose positions must be rearranged to make the next insertion possible have a length scale which grows logarithmically with age, while their life-time grows exponentially with size. The implications for a recent cluster model of colloidal dynamics,(S. Boettcher and P. Sibani, J. Phys.: Cond. Matter, 2011 N. Becker et al., J. Phys.: Cond. Matter, 2014) are discussed. Support rom the Villum Foundation is gratefully acknowledged.

  12. 7 CFR 51.2284 - Size classification.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Size classification. 51.2284 Section 51.2284... Size classification. The following classifications are provided to describe the size of any lot... shall conform to the requirements of the specified classification as defined below: (a) Halves. Lot...

  13. Wind farm production cost: Optimum turbine size and farm capacity in the actual market

    Energy Technology Data Exchange (ETDEWEB)

    Laali, A.R.; Meyer, J.L.; Bellot, C. [Electricite de France, Chatou (France); Louche, A. [Espace de Recherche, Ajaccio (France)

    1996-12-31

    Several studies are undertaken in R&D Division of EDF in collaboration with ERASME association in order to have a good knowledge of the wind energy production costs. These studies are performed in the framework of a wind energy monitoring project and concern the influence of a few parameters like wind farm capacity, turbine size and wind speed on production costs, through an analysis of the actual market trend. Some 50 manufacturers and 140 different kind of wind turbines are considered for this study. The minimum production cost is situated at 800/900 kW wind turbine rated power. This point will probably move to more important powers in the future. This study is valid only for average conditions and some special parameters like particular climate conditions or lack of infrastructure for a special site the could modify the results shown on the curves. The variety of wind turbines (rated power as a function of rotor diameter, height and specific rated power) in the actual market is analyzed. A brief analysis of the market trend is also performed. 7 refs., 7 figs.

  14. Effect of raw soya bean particle size on productive performance and digestion of dairy cows.

    Science.gov (United States)

    Naves, A B; Freitas Júnior, J E; Barletta, R V; Gandra, J R; Calomeni, G D; Gardinal, R; Takiya, C S; Vendramini, T H A; Mingoti, R D; Rennó, F P

    2016-08-01

    Differing soya bean particle sizes may affect productive performance and ruminal fermentation due to the level of fatty acid (FA) exposure of the cotyledon in soya bean grain and because the protein in small particles is more rapidly degraded than the protein in large particles, which influence ruminal fibre digestion and the amounts of ruminally undegradable nutrients. The objective of this experiment was to investigate the effects of raw soya bean particle size on productive performance, digestion and milk FA profile of dairy cows. Twelve Holstein cows were assigned to three 4 × 4 Latin squares with 21-day periods. At the start of the experiment, cows were 121 days in milk (DIM) and yielded 30.2 kg/day of milk. Cows were fed 4 diets: (i) control diet (CO), without raw soya bean; (ii) whole raw soya bean (WRS); (iii) cracked raw soya bean in Wiley mill 4-mm screen (CS4); and (iv) cracked raw soya bean in Wiley mill 2-mm screen (CS2). The inclusion of soya beans (whole or cracked) was 200 g/kg on dry matter (DM) basis and partially replaced ground corn and soya bean meal. Uncorrected milk yield and composition were not influenced by experimental diets; however, fat-corrected milk (FCM) decreased when cows were fed soya bean treatments. Soya bean diets increased the intake of ether extract (EE) and net energy of lactation (NEL ), and decreased the intake of DM and non-fibre carbohydrate (NFC). Ruminal propionate concentration was lower in cows fed WRS than cows fed CS2 or CS4. Cows fed cracked raw soya bean presented lower nitrogen in faeces than cows fed WRS. The milk of cows fed WRS, CS2 and CS4 presented higher unsaturated FA than cows fed CO. The addition of raw soya bean in cow diets, regardless of the particle size, did not impair uncorrected milk yield and nutrient digestion, and increased the concentration of unsaturated FA in milk. Cows fed cracked raw soya bean presented similar productive performance to cows fed whole raw soya bean. Journal of

  15. Finite-size effects on two-particle production in continuous and discrete spectrum

    CERN Document Server

    Lednicky, R

    2005-01-01

    The effect of a finite space-time extent of particle production region on the lifetime measurement of hadronic atoms produced by a high energy beam in a thin target is discussed. Particularly, it is found that the neglect of this effect on the pionium lifetime measurement in the experiment DIRAC at CERN could lead to the lifetime overestimation on the level of the expected 10% statistical error. It is argued that the data on correlations of identical particles obtained in the same experimental conditions, together with transport code simulation, allow to diminish the systematic error in the extracted lifetime to an acceptable level. The theoretical systematic errors arising in the calculation of the finite-size effect due to the neglect of non-equal emission times in the pair c.m.s., the space-time coherence and the residual charge are shown to be negligible.

  16. Emanation of 232U and its radioactive daughter products from respirable size particles

    International Nuclear Information System (INIS)

    Cuddihy, R.G.; Griffith, W.C.; Hoover, M.D.; Kanapilly, G.M.; Stalnaker, N.D.

    1978-01-01

    This study is to develop a model for the emanation of 232 U and its radioactive daughter products from particles of Th-U fuel material. The radiation doses to internal organs following inhalation of these particles can only be calculated by knowing the rate of emanation of the daughters from particles in the lung and the subsequent excretion or translocation of the daughters to other organs. The emanation mechanisms are recoil of the daughter nuclei from the particle during alpha decay of the parent, diffusion of inert gas daughters from the particle and dissolution of the particle itself in biological fluids. Experiments to evaluate these mechanisms will involve ThO 2 and UO 2 particles in the size range 0.1 to 1.0 μm MMAD uniformly labeled with 232 U. The influence of the material temperature history on emanation will be investigated by heat treating particles at 600 and 1400 0 C

  17. Resenha de: Recueil des travaux historiques de Ferdinand Lot

    Directory of Open Access Journals (Sweden)

    Eurípedes Simões de Paula

    1968-03-01

    Full Text Available RECUEIL DES TRAVAUX HISTORIQUES DE FERDINAND LOT. Tome premier. Coleção "Hautes Études Médievales et Modernes". Centre de Recherches d'Histoire et de Philologie de la IVe Section de l'École Pratique des Hautes Études. Prefácio de Ch. Samaran e biografia por I. Vildé-Lot e M. Mahn-Lot. Publicado com o concurso do Centre National de la Recherche Scientifique. Genebra, Librairie Droz e Paris, Librairie Minard. In-89, XVIII -I- 780 pp

  18. Assumptions of acceptance sampling and the implications for lot contamination: Escherichia coli O157 in lots of Australian manufacturing beef.

    Science.gov (United States)

    Kiermeier, Andreas; Mellor, Glen; Barlow, Robert; Jenson, Ian

    2011-04-01

    The aims of this work were to determine the distribution and concentration of Escherichia coli O157 in lots of beef destined for grinding (manufacturing beef) that failed to meet Australian requirements for export, to use these data to better understand the performance of sampling plans based on the binomial distribution, and to consider alternative approaches for evaluating sampling plans. For each of five lots from which E. coli O157 had been detected, 900 samples from the external carcass surface were tested. E. coli O157 was not detected in three lots, whereas in two lots E. coli O157 was detected in 2 and 74 samples. For lots in which E. coli O157 was not detected in the present study, the E. coli O157 level was estimated to be contaminated carton, the total number of E. coli O157 cells was estimated to be 813. In the two lots in which E. coli O157 was detected, the pathogen was detected in 1 of 12 and 2 of 12 cartons. The use of acceptance sampling plans based on a binomial distribution can provide a falsely optimistic view of the value of sampling as a control measure when applied to assessment of E. coli O157 contamination in manufacturing beef. Alternative approaches to understanding sampling plans, which do not assume homogeneous contamination throughout the lot, appear more realistic. These results indicate that despite the application of stringent sampling plans, sampling and testing approaches are inefficient for controlling microbiological quality.

  19. Group heterogeneity increases the risks of large group size: a longitudinal study of productivity in research groups.

    Science.gov (United States)

    Cummings, Jonathon N; Kiesler, Sara; Bosagh Zadeh, Reza; Balakrishnan, Aruna D

    2013-06-01

    Heterogeneous groups are valuable, but differences among members can weaken group identification. Weak group identification may be especially problematic in larger groups, which, in contrast with smaller groups, require more attention to motivating members and coordinating their tasks. We hypothesized that as groups increase in size, productivity would decrease with greater heterogeneity. We studied the longitudinal productivity of 549 research groups varying in disciplinary heterogeneity, institutional heterogeneity, and size. We examined their publication and citation productivity before their projects started and 5 to 9 years later. Larger groups were more productive than smaller groups, but their marginal productivity declined as their heterogeneity increased, either because their members belonged to more disciplines or to more institutions. These results provide evidence that group heterogeneity moderates the effects of group size, and they suggest that desirable diversity in groups may be better leveraged in smaller, more cohesive units.

  20. Relative estimates of TCA cycle pool size from 14CO2 production profiles

    International Nuclear Information System (INIS)

    Kelleher, J.K.; Cesta, M.L.; Holleran, A.L.

    1986-01-01

    In metabolic and isotopic steady state, the rate of 14 CO 2 production by TCA cycle intermediates labeled at different positions is linear. However, before the system reaches isotopic steady state, the rate of 14 CO 2 production is non-linear. The x-intercept extrapolated from the linear phase indicates the turnover rate of all metabolic pools the tracer must pass through. By exposing identical systems to 14 C succinate labeled in different positions, the contribution of TCA cycle pools to the non-linear phase may be considered. Specifically, the extrapolated x-intercept for [2,3 14 C] succinate will be greater than the x-intercept for [1,4 14 C] succinate if the TCA cycle pools are a contributing factor to the non-linear phase. The authors have used this method to analyze pyruvate oxidation in AS 30D hepatoma cells. They found that the extrapolated x-intercepts for the two tracers were identical. This indicates that the non-linear phase resulted from equilibration of the tracer with pools prior to entering the TCA cycle, i.e. lactate. Using this technique, it may be possible to estimate the variations in TCA cycle pool sizes in vivo

  1. Measurement of the thickness of the sprayed nickel coatings on large-sized cast iron products

    Directory of Open Access Journals (Sweden)

    В. А. Сясько

    2016-11-01

    Full Text Available Modern industries increasingly use automatic spraying of heat-resistant Nickel  coating with a thickness  of      T = 1-3 mm for large-size parts made of cast iron with nodular graphite. The process of coating application is characterized by time-dependent behavior of its relative magnetic permeability, μс , that is a function of relaxation time, which can be as long as 24 hours, and by μс deviation from point to point on the surface. Aspects of eddy-current phase method for measuring the T value are considered. The structure of four- winding eddy current transformer transducers is described and results of calculation and optimization of their parameters are presented. The influence of controlled and interfering parameters is considered. Based  on the above results, a two-channel combined transducer is developed  providing measurement  error  of ΔТ ≤ ±(0.03T + 0.02 mm  in the shop environment in the process of coating application and in the final product check. Results of tests on reference specimens and of application in production processes are presented.

  2. Effect of Pot Size on Various Characteristics Related to Photosynthetic Matter Production in Soybean Plants

    Directory of Open Access Journals (Sweden)

    Minobu Kasai

    2012-01-01

    Full Text Available Despite the wide uses of potted plants, information on how pot size affects plant photosynthetic matter production is still considerably limited. This study investigated with soybean plants how transplantation into larger pots affects various characteristics related to photosynthetic matter production. The transplantation was analyzed to increase leaf photosynthetic rate, transpiration rate, and stomatal conductance without affecting significantly leaf intercellular CO2 concentration, implicating that the transplantation induced equal increases in the rate of CO2 diffusion via leaf stomata and the rate of CO2 fixation in leaf photosynthetic cells. Analyses of Rubisco activity and contents of a substrate (ribulose-1,5-bisphosphate (RuBP for Rubisco and total protein in leaf suggested that an increase in leaf Rubisco activity, which is likely to result from an increase in leaf Rubisco content, could contribute to the transplantation-induced increase in leaf photosynthetic rate. Analyses of leaf major photosynthetic carbohydrates and dry weights of source and sink organs revealed that transplantation increased plant sink capacity that uses leaf starch, inducing a decrease in leaf starch content and an increase in whole plant growth, particularly, growth of sink organs. Previously, in the same soybean species, it was demonstrated that negative correlation exists between leaf starch content and photosynthetic rate and that accumulation of starch in leaf decreases the rate of CO2 diffusion within leaf. Thus, it was suggested that the transplantation-induced increase in plant sink capacity decreasing leaf starch content could cause the transplantation-induced increase in leaf photosynthetic rate by inducing an increase in the rate of CO2 diffusion within leaf and thereby substantiating an increase in leaf Rubisco activity in vivo. It was therefore concluded that transplantation of soybean plants into larger pots attempted in this study increased the

  3. Size structure of marine soft-bottom macrobenthic communities across natural habitat gradients: implications for productivity and ecosystem function.

    Directory of Open Access Journals (Sweden)

    Tara A Macdonald

    Full Text Available Size distributions of biotic assemblages are important modifiers of productivity and function in marine sediments. We investigated the distribution of proportional organic biomass among logarithmic size classes (2(-6J to 2(16J in the soft-bottom macrofaunal communities of the Strait of Georgia, Salish Sea on the west coast of Canada. The study examines how size structure is influenced by 3 fundamental habitat descriptors: depth, sediment percent fines, and organic flux (modified by quality. These habitat variables are uncorrelated in this hydrographically diverse area, thus we examine their effects in combination and separately. Cluster analyses and cumulative biomass size spectra reveal clear and significant responses to each separate habitat variable. When combined, habitat factors result in three distinct assemblages: (1 communities with a high proportion of biomass in small organisms, typical of shallow areas (3 g C/m(2/yr/δ(15N from the Fraser River; and (3 communities with biomass dominated by moderately large organisms, but lacking the smallest and largest size classes, typical of deep, fine sediments experiencing low modified organic flux (<3.0 gC/m(2/yr/δ(15N. The remaining assemblages had intermediate habitat types and size structures. Sediment percent fines and flux appear to elicit threshold responses in size structure, whereas depth has the most linear influence on community size structure. The ecological implications of size structure in the Strait of Georgia relative to environmental conditions, secondary production and sediment bioturbation are discussed.

  4. Multidrug resistance among new tuberculosis cases: detecting local variation through lot quality-assurance sampling.

    Science.gov (United States)

    Hedt, Bethany Lynn; van Leth, Frank; Zignol, Matteo; Cobelens, Frank; van Gemert, Wayne; Nhung, Nguyen Viet; Lyepshina, Svitlana; Egwaga, Saidi; Cohen, Ted

    2012-03-01

    Current methodology for multidrug-resistant tuberculosis (MDR TB) surveys endorsed by the World Health Organization provides estimates of MDR TB prevalence among new cases at the national level. On the aggregate, local variation in the burden of MDR TB may be masked. This paper investigates the utility of applying lot quality-assurance sampling to identify geographic heterogeneity in the proportion of new cases with multidrug resistance. We simulated the performance of lot quality-assurance sampling by applying these classification-based approaches to data collected in the most recent TB drug-resistance surveys in Ukraine, Vietnam, and Tanzania. We explored 3 classification systems- two-way static, three-way static, and three-way truncated sequential sampling-at 2 sets of thresholds: low MDR TB = 2%, high MDR TB = 10%, and low MDR TB = 5%, high MDR TB = 20%. The lot quality-assurance sampling systems identified local variability in the prevalence of multidrug resistance in both high-resistance (Ukraine) and low-resistance settings (Vietnam). In Tanzania, prevalence was uniformly low, and the lot quality-assurance sampling approach did not reveal variability. The three-way classification systems provide additional information, but sample sizes may not be obtainable in some settings. New rapid drug-sensitivity testing methods may allow truncated sequential sampling designs and early stopping within static designs, producing even greater efficiency gains. Lot quality-assurance sampling study designs may offer an efficient approach for collecting critical information on local variability in the burden of multidrug-resistant TB. Before this methodology is adopted, programs must determine appropriate classification thresholds, the most useful classification system, and appropriate weighting if unbiased national estimates are also desired.

  5. A review of lot streaming in a flow shop environment with makespan criteria

    Directory of Open Access Journals (Sweden)

    Pedro Gómez-Gasquet

    2013-07-01

    Full Text Available Purpose: This paper reviews current literature and contributes a set of findings that capture the current state-of-the-art of the topic of lot streaming in a flow-shop. Design/methodology/approach: A literature review to capture, classify and summarize the main body of knowledge on lot streaming in a flow-shop with makespan criteria and, translate this into a form that is readily accessible to researchers and practitioners in the more mainstream production scheduling community. Findings and Originality/value: The existing knowledge base is somewhat fragmented. This is a relatively unexplored topic within mainstream operations management research and one which could provide rich opportunities for further exploration. Originality/value: This paper sets out to review current literature, from an advanced production scheduling perspective, and contributes a set of findings that capture the current state-of-the-art of this topic.

  6. A framework for effective implementation of lean production in Small and Medium-sized Enterprises

    Directory of Open Access Journals (Sweden)

    Amine Belhadi

    2016-09-01

    Full Text Available Purpose: The present paper aims at developing an effective framework including all the components necessary for implementing lean production properly in Small and Medium-sized Enterprises. Design/methodology/approach: The paper begins with the review of the main existing framework of lean implementation in order to highlight shortcomings in the literature through a lack of suitable framework for small companies. To overcome this literature gap, data of successful initiatives of lean implementation were collected based on a multiple case study approach. These initiatives has been juxtaposed in order to develop a new, practical and effective framework that includes all the components (process, tools, success factors that are necessary to implement lean in Small and Medium-sized Enterprises. Findings: The proposed framework presents many significant contributions: First, it provides an overcoming for the limitations of the existing frameworks by proposing for consultants, researchers and organizations an effective framework for lean implementation in SMEs that allows SMEs to benefit from competitive advantages  gained by lean. Second, it brings together a set of the more essential and critical elements of lean implementation commonly used by SMEs and derived from the practical experiences of them in lean implementation. Finally, it highlights the successful experiences of small companies in implementing lean programs and then proves that lean can give a relevant results even for SMEs. Research limitations/implications: The proposed framework presents a number of limitations and still evokes extension for further researches: Although it was derived from practical experiences of SMEs, the proposed framework is not supported by practical implementation. On the other hand and even though the elements in the proposed framework from the practical experiences of four SMEs, the identified elements need to be generalized and enriching by conducting

  7. Influence of lateral target size on hot electron production and electromagnetic pulse emission from laser-irradiated metallic targets

    International Nuclear Information System (INIS)

    Chen Ziyu; Li Jianfeng; Yu Yong; Li Xiaoya; Peng Qixian; Zhu Wenjun; Wang Jiaxiang

    2012-01-01

    The influences of lateral target size on hot electron production and electromagnetic pulse emission from laser interaction with metallic targets have been investigated. Particle-in-cell simulations at high laser intensities show that the yield of hot electrons tends to increase with lateral target size, because the larger surface area reduces the electrostatic field on the target, owing to its expansion along the target surface. At lower laser intensities and longer time scales, experimental data characterizing electromagnetic pulse emission as a function of lateral target size also show target-size effects. Charge separation and a larger target tending to have a lower target potential have both been observed. The increase in radiation strength and downshift in radiation frequency with increasing lateral target size can be interpreted using a simple model of the electrical capacity of the target.

  8. Influence of lateral target size on hot electron production and electromagnetic pulse emission from laser-irradiated metallic targets

    Energy Technology Data Exchange (ETDEWEB)

    Chen Ziyu; Li Jianfeng; Yu Yong; Li Xiaoya; Peng Qixian; Zhu Wenjun [National Key Laboratory of Shock Wave and Detonation Physics, Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang, Sichuan 621900 (China); Wang Jiaxiang [State Key Laboratory of Precision Spectroscopy, East China Normal University, Shanghai 200062 (China)

    2012-11-15

    The influences of lateral target size on hot electron production and electromagnetic pulse emission from laser interaction with metallic targets have been investigated. Particle-in-cell simulations at high laser intensities show that the yield of hot electrons tends to increase with lateral target size, because the larger surface area reduces the electrostatic field on the target, owing to its expansion along the target surface. At lower laser intensities and longer time scales, experimental data characterizing electromagnetic pulse emission as a function of lateral target size also show target-size effects. Charge separation and a larger target tending to have a lower target potential have both been observed. The increase in radiation strength and downshift in radiation frequency with increasing lateral target size can be interpreted using a simple model of the electrical capacity of the target.

  9. Shelf life extension for the lot AAE nozzle severance LSCs

    Science.gov (United States)

    Cook, M.

    1990-01-01

    Shelf life extension tests for the remaining lot AAE linear shaped charges for redesigned solid rocket motor nozzle aft exit cone severance were completed in the small motor conditioning and firing bay, T-11. Five linear shaped charge test articles were thermally conditioned and detonated, demonstrating proper end-to-end charge propagation. Penetration depth requirements were exceeded. Results indicate that there was no degradation in performance due to aging or the linear shaped charge curving process. It is recommended that the shelf life of the lot AAE nozzle severance linear shaped charges be extended through January 1992.

  10. Improving aggregate behavior in parking lots with appropriate local maneuvers

    KAUST Repository

    Rodriguez, Samuel

    2013-11-01

    In this paper we study the ingress and egress of pedestrians and vehicles in a parking lot. We show how local maneuvers executed by agents permit them to create trajectories in constrained environments, and to resolve the deadlocks between them in mixed-flow scenarios. We utilize a roadmap-based approach which allows us to map complex environments and generate heuristic local paths that are feasible for both pedestrians and vehicles. Finally, we examine the effect that some agent-behavioral parameters have on parking lot ingress and egress. © 2013 IEEE.

  11. A hybrid algorithm for solving the economic lot and delivery scheduling problem in the common cycle case

    DEFF Research Database (Denmark)

    Clausen, Jens; Ju, S.

    2006-01-01

    The ELDSP problem is a combined lot sizing and sequencing problem. A supplier produces and delivers components of different types to a consumer in batches. The task is to determine the cycle time, i.e., the time between deliveries, which minimizes the total cost per time unit. This includes the d...

  12. 7 CFR 42.141 - Obtaining Operating Characteristic (OC) curve information for skip lot sampling and inspection.

    Science.gov (United States)

    2010-01-01

    ... Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices... sampling plan for normal condition of container inspection from Table I or Table I-A of § 42.109. (b) For a... procedures. For example, let's assume the lot size is 6,001 to 12,000 containers, and we use the single...

  13. Size-fractionated characterization and quantification of nanoparticle release rates from a consumer spray product containing engineered nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Hagendorfer, Harald, E-mail: Harald.Hagendorfer@empa.c [EMPA, Swiss Federal Laboratories for Materials Testing and Research (Switzerland); Lorenz, Christiane, E-mail: Christiane.Lorenz@chem.ethz.c [ETHZ, Swiss Federal Institute of Technology Zurich (Switzerland); Kaegi, Ralf, E-mail: Ralf.Kaegi@eawag.ch; Sinnet, Brian, E-mail: Brian.Sinnet@eawag.c [EAWAG, Swiss Federal Institute of Aquatic Science and Technology (Switzerland); Gehrig, Robert, E-mail: Robert.Gehrig@empa.c [EMPA, Swiss Federal Laboratories for Materials Testing and Research (Switzerland); Goetz, Natalie V., E-mail: Natalie.vonGoetz@chem.ethz.ch; Scheringer, Martin, E-mail: Martin.Scheringer@chem.ethz.c [ETHZ, Swiss Federal Institute of Technology Zurich (Switzerland); Ludwig, Christian, E-mail: Christian.Ludwig@psi.c [PSI, Paul Scherrer Institue (Switzerland); Ulrich, Andrea, E-mail: Andrea.Ulrich@empa.c [EMPA, Swiss Federal Laboratories for Materials Testing and Research (Switzerland)

    2010-09-15

    This study describes methods developed for reliable quantification of size- and element-specific release of engineered nanoparticles (ENP) from consumer spray products. A modified glove box setup was designed to allow controlled spray experiments in a particle-minimized environment. Time dependence of the particle size distribution in a size range of 10-500 nm and ENP release rates were studied using a scanning mobility particle sizer (SMPS). In parallel, the aerosol was transferred to a size-calibrated electrostatic TEM sampler. The deposited particles were investigated using electron microscopy techniques in combination with image processing software. This approach enables the chemical and morphological characterization as well as quantification of released nanoparticles from a spray product. The differentiation of solid ENP from the released nano-sized droplets was achieved by applying a thermo-desorbing unit. After optimization, the setup was applied to investigate different spray situations using both pump and gas propellant spray dispensers for a commercially available water-based nano-silver spray. The pump spray situation showed no measurable nanoparticle release, whereas in the case of the gas spray, a significant release was observed. From the results it can be assumed that the homogeneously distributed ENP from the original dispersion grow in size and change morphology during and after the spray process but still exist as nanometer particles of size <100 nm. Furthermore, it seems that the release of ENP correlates with the generated aerosol droplet size distribution produced by the spray vessel type used. This is the first study presenting results concerning the release of ENP from spray products.

  14. Size-fractionated characterization and quantification of nanoparticle release rates from a consumer spray product containing engineered nanoparticles

    International Nuclear Information System (INIS)

    Hagendorfer, Harald; Lorenz, Christiane; Kaegi, Ralf; Sinnet, Brian; Gehrig, Robert; Goetz, Natalie V.; Scheringer, Martin; Ludwig, Christian; Ulrich, Andrea

    2010-01-01

    This study describes methods developed for reliable quantification of size- and element-specific release of engineered nanoparticles (ENP) from consumer spray products. A modified glove box setup was designed to allow controlled spray experiments in a particle-minimized environment. Time dependence of the particle size distribution in a size range of 10-500 nm and ENP release rates were studied using a scanning mobility particle sizer (SMPS). In parallel, the aerosol was transferred to a size-calibrated electrostatic TEM sampler. The deposited particles were investigated using electron microscopy techniques in combination with image processing software. This approach enables the chemical and morphological characterization as well as quantification of released nanoparticles from a spray product. The differentiation of solid ENP from the released nano-sized droplets was achieved by applying a thermo-desorbing unit. After optimization, the setup was applied to investigate different spray situations using both pump and gas propellant spray dispensers for a commercially available water-based nano-silver spray. The pump spray situation showed no measurable nanoparticle release, whereas in the case of the gas spray, a significant release was observed. From the results it can be assumed that the homogeneously distributed ENP from the original dispersion grow in size and change morphology during and after the spray process but still exist as nanometer particles of size <100 nm. Furthermore, it seems that the release of ENP correlates with the generated aerosol droplet size distribution produced by the spray vessel type used. This is the first study presenting results concerning the release of ENP from spray products.

  15. Udder size and milk production potentials of goats and sheep in the ...

    African Journals Online (AJOL)

    During these periods, the udder sizes of the dams were measured weekly before hand milking thrice a week to determine the milk yield. Samples of the milk were analysed for th.eir composition. The results showed that the udder size increased with increasing milk yield (112 - 248ml) up to the peak of lactation which was ...

  16. Size- and food-dependent growth drives patterns of competitive dominance along productivity gradients

    NARCIS (Netherlands)

    Huss, M.; Gårdmark, A.; van Leeuwen, A.; de Roos, A.M.

    2012-01-01

    Patterns of coexistence among competing species exhibiting size- and food-dependent growth remain largely unexplored. Here we studied mechanisms behind coexistence and shifts in competitive dominance in a size-structured fish guild, representing sprat and herring stocks in the Baltic Sea, using a

  17. Particle size distribution of hydrocyanic acid in gari, a cassava-based product.

    Science.gov (United States)

    Maduagwu, E N; Fafunso, M

    1980-12-01

    A reciprocal relationship was observed between the cyanide content of gari and particle size. Hydrocyanic acid (HCN) content was positively correlated (r = 0.62) with sugar content but the correlation with starch content was poor (r = 0.33). From both the nutritional and toxicological standpoints, it would appear that larger particles size in gari is beneficial.

  18. Production of various sizes and some properties of beryllium pebbles by the rotating electrode method

    Energy Technology Data Exchange (ETDEWEB)

    Iwadachi, T.; Sakamoto, N.; Nishida, K. [NGK Insulators Ltd., Nagoya (Japan); Kawamura, H.

    1998-01-01

    The particle size distribution of beryllium pebbles produced by the rotating electrode method was investigated. Particle size depends on some physical properties and process parameters, which can practicaly be controlled by varying electrode angular velocities. The average particle sizes produced were expressed by the hyperbolic function with electrode angular velocity. Particles within the range of 0.3 and 2.0 mm in diameter are readily produced by the rotating electrode method while those of 0.2 mm in diameter are also fabricable. Sphericity and surface roughness were good in each size of pebble. Grain sizes of the pebbles are 17 {mu} m in 0.25 mm diameter pebbles and 260 {mu} m in 1.8 mm diameter pebbles. (author)

  19. Comparison of particle sizes between 238PuO2 before aqueous processing, after aqueous processing, and after ball milling

    Energy Technology Data Exchange (ETDEWEB)

    Mulford, Roberta Nancy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-02-06

    Particle sizes determined for a single lot of incoming Russian fuel and for a lot of fuel after aqueous processing are compared with particle sizes measured on fuel after ball-milling. The single samples of each type are believed to have particle size distributions typical of oxide from similar lots, as the processing of fuel lots is fairly uniform. Variation between lots is, as yet, uncharacterized. Sampling and particle size measurement methods are discussed elsewhere.

  20. Improved coordination of the production cycle in the paper industry : To manage a wide product range and sequence-dependent changeovers

    OpenAIRE

    Johansson, Carl; Strandberg, Erik

    2015-01-01

    Today the manufacturing industry is faced with the challenge to stay competitive in an era of shorter product lifecycles and increased product variety. This has forced manufacturing companies to deal with an increased amount of products and more and faster changes to the product line. The same trend can also be seen in the paper industry where bulk products decreasing and more diversified products in smaller lot-sizes increasing, with a greater focus on customer specific products. Traditional...

  1. Production and Characterisation of Microfine Sized Palm Oil Fuel Ash (POFA Originated from Bau, Lundu Palm Oil Mill

    Directory of Open Access Journals (Sweden)

    Ahmadi R.

    2017-01-01

    Full Text Available This paper investigates an effective and economical way for laboratory scale production of micro fine sized palm oil fuel ash (POFA using an electric powder grinder. The raw POFA obtained from the palm oil mill is initially grinded by using Los Angeles abrasion machine, and then sieved using 150 μm sieve before it is burned in a furnace at 500°C. The burned POFA is then grinded using electric powder grinder to obtain the targeted micro fine sized. The physical, morphological and chemical properties of the micro fine sized POFA produced are analysed in the form of cement paste using Particle Size Analyzer (PSA, nitrogen sorption by using BET method, Fourier Transform Infrared Spectroscopy (FT-IR and Scanning Electron Microscopy (SEM with Energy Dispersive Spectroscopy (EDS. The results show that 96% micro fine sized POFA is produced when using the optimum grinding process. The microstructural analyses of cement paste with 20% micro fine sized POFA replacement give the optimum results that contribute to higher compressive strength. The overall results of this research show that the optimum grinding process by using electric powder grinder is relevant and can be used as pioneering work in the concrete production industry.

  2. Relationships between annual plant productivity, nitrogen deposition and fire size in low-elevation California desert scrub

    Science.gov (United States)

    Rao, Leela E.; Matchett, John R.; Brooks, Matthew L.; Johns, Robert; Minnich, Richard A.; Allen, Edith B.

    2014-01-01

    Although precipitation is correlated with fire size in desert ecosystems and is typically used as an indirect surrogate for fine fuel load, a direct link between fine fuel biomass and fire size has not been established. In addition, nitrogen (N) deposition can affect fire risk through its fertilisation effect on fine fuel production. In this study, we examine the relationships between fire size and precipitation, N deposition and biomass with emphasis on identifying biomass and N deposition thresholds associated with fire spreading across the landscape. We used a 28-year fire record of 582 burns from low-elevation desert scrub to evaluate the relationship of precipitation, N deposition and biomass with the distribution of fire sizes using quantile regression. We found that models using annual biomass have similar predictive ability to those using precipitation and N deposition at the lower to intermediate portions of the fire size distribution. No distinct biomass threshold was found, although within the 99th percentile of the distribution fire size increased with greater than 125 g m–2 of winter fine fuel production. The study did not produce an N deposition threshold, but did validate the value of 125 g m–2 of fine fuel for spread of fires.

  3. Activity Recognition and Localization on a Truck Parking Lot

    NARCIS (Netherlands)

    Andersson, M.; Patino, L.; Burghouts, G.J.; Flizikowski, A.; Evans, M.; Gustafsson, D.; Petersson, H.; Schutte, K.; Ferryman, J.

    2013-01-01

    In this paper we present a set of activity recognition and localization algorithms that together assemble a large amount of information about activities on a parking lot. The aim is to detect and recognize events that may pose a threat to truck drivers and trucks. The algorithms perform zone-based

  4. The effect of polymers onto the size of zinc layered hydroxide salt and its calcined product

    Science.gov (United States)

    Hussein, Mohd Zobir bin; Ghotbi, Mohammad Yeganeh; Yahaya, Asmah Hj; Abd Rahman, Mohd Zaki

    2009-02-01

    Zinc hydroxide nitrate, a brucite-like layered material was synthesized using pH control method. Poly(vinyl alcohol) and poly(ethylene glycol) were used at various percentages as size decreasing agents during the synthesis of zinc hydroxide nitrate. SEM and PXRD showed the decrease of size and thickness of the resultant zinc hydroxide nitrates. TG and surface area data confirmed the decrease of the particle sizes, too. When zinc hydroxide nitrates were heat treated at 500 °C, the physical properties of nano zinc oxides obtained depended on the parent material, zinc hydroxide nitrate.

  5. Influence of the section size and holding time on the graphite parameters of ductile iron production

    Directory of Open Access Journals (Sweden)

    S. Bockus

    2009-01-01

    Full Text Available This work was conducted to establish the conditions required to produce a desirable structure of the castings of various section sizes. This investigation was focused on the study of the influence of cooling rate or section size and holding time on graphite parameters of the ductile iron. Plates having thickness between 3 and 50mm were cast in sand molds using the same melt. The present investigation has shown that the section size of ductile iron castings and holding time had strong effect on the graphite parameters of the castings.

  6. The importance of meat, particularly salmon, to body size, population productivity, and conservation of North American brown bears.

    Science.gov (United States)

    G.V. Hilderbrand; C.C. Schwartz; C.T. Robbins; M.E. Hanley Jacoby; S.M. Arthur; C. Servheen

    1999-01-01

    We hypothesized that the relative availability of meat, indicated by contribution to the diet, would be positively related to body size and population productivity of North American brown, or grizzly, bears (Ursus arctos). Dietary contributions of plant matter and meat derived from both terrestrial and marine sources were quantified by stable-...

  7. Compaction of bentonite blocks. Development of techniques for production of blocks with different shapes and sizes

    International Nuclear Information System (INIS)

    Johannesson, Lars-Erik; Boergesson, Lennart

    1998-09-01

    In this report useful techniques for producing both smaller blocks manageable by man (10-15 kg) and larger blocks which need special equipment for handling (weight up to 600 kg) are described. Tests for producing blocks with a weight of approximately 10 kg were carried out at Hoeganaes Bjuf AB in Bjuv. This industry is normally producing refractory bricks and other refractory products. The plant has facilities for handling large volumes of clay. It also has machines suitable for producing uniaxially compacted blocks. Tests performed at the plant show that it is possible to compact blocks with good quality. The best quality was reached with a coarsely ground bentonite at a water ratio of 17 %. The compaction rate was high and performed with lubricated form and stepwise loading. Tests, in order to find a technique for producing larger blocks with a diameter of the same size as a deposition hole (about 1.65 m), were also made. The technique was developed in a smaller scale (250 mm). Ring-shaped blocks with the same outer diameter and with an inner diameter of about 156 mm were also compacted. The compaction was made with vacuum in the form. The outer surface of the form was conical and most of the tests were performed with a lubricated form. Tests were performed with different water ratios of the bentonite. All the blocks had a good quality. In consequence of the good test results a form with a 1000 mm diameter was constructed and a number of compaction tests were performed. The same technique was used as for the smaller blocks. The compaction pressure in most tests was 100 MPa (maximum compaction load 80.000 kN). The tests were performed at HYDROWELD in Ystad in a press with a maximum capacity of 300.000 kN. All tests were performed with MX-80. Most of the blocks had a good quality. A small damage close to the upper surface of all blocks was observed but is considered to be of no importance for the possibility to handle the blocks and is not affecting the properties

  8. Compaction of bentonite blocks. Development of techniques for production of blocks with different shapes and sizes

    Energy Technology Data Exchange (ETDEWEB)

    Johannesson, Lars-Erik; Boergesson, Lennart [Clay Technology AB, Lund (Sweden)

    1998-09-01

    In this report useful techniques for producing both smaller blocks manageable by man (10-15 kg) and larger blocks which need special equipment for handling (weight up to 600 kg) are described. Tests for producing blocks with a weight of approximately 10 kg were carried out at Hoeganaes Bjuf AB in Bjuv. This industry is normally producing refractory bricks and other refractory products. The plant has facilities for handling large volumes of clay. It also has machines suitable for producing uniaxially compacted blocks. Tests performed at the plant show that it is possible to compact blocks with good quality. The best quality was reached with a coarsely ground bentonite at a water ratio of 17 %. The compaction rate was high and performed with lubricated form and stepwise loading. Tests, in order to find a technique for producing larger blocks with a diameter of the same size as a deposition hole (about 1.65 m), were also made. The technique was developed in a smaller scale (250 mm). Ring-shaped blocks with the same outer diameter and with an inner diameter of about 156 mm were also compacted. The compaction was made with vacuum in the form. The outer surface of the form was conical and most of the tests were performed with a lubricated form. Tests were performed with different water ratios of the bentonite. All the blocks had a good quality. In consequence of the good test results a form with a 1000 mm diameter was constructed and a number of compaction tests were performed. The same technique was used as for the smaller blocks. The compaction pressure in most tests was 100 MPa (maximum compaction load 80.000 kN). The tests were performed at HYDROWELD in Ystad in a press with a maximum capacity of 300.000 kN. All tests were performed with MX-80. Most of the blocks had a good quality. A small damage close to the upper surface of all blocks was observed but is considered to be of no importance for the possibility to handle the blocks and is not affecting the properties

  9. Formation of the texture of fermented milk and cereal product by varying the particle size distribution of cereal compositions

    Directory of Open Access Journals (Sweden)

    Pas'ko O. V.

    2016-09-01

    Full Text Available Combining animal and plant components is a promising direction of creating specialized foods of high biological and nutritional value. In this regard, research aimed at developing a fermented product technology based on combination of raw milk and grain products is relevant. In researches a set of generally accepted standard methods including physical-chemical, microbiological, biochemical, rheological, and mathematical methods of statistical processing of research results and development of mathematical models has been applied. The paper presents the results of research aimed at developing the technology of fermented milk – cereal product. In the first phase of research to substantiate product composition the systematic approach has been applied considering components of the product, changes of their status and properties as the current biotechnological systems (BPS. Selection of the grains' optimum ratio in the composition has been carried out on the basis of a set of indicators: the chemical composition and energy value, the content of B vitamins and dietary fibers, the indicator of biological value, organoleptic characteristics. Analysis of the combined results allows choose cereal flakes composition ratio of 1 : 1 : 1 (Oatmeal : Barley : Rye for further studies. As the main source of carbohydrate honey is used, it also improves the organoleptic properties of the product. Nutritional supplement glycine is used as a modifier of taste and smell. It has been found that introduction of glycine at 0.1 % in the BPS "milk – cereal composition" naturally decreases the intensity of taste and smell of cereal composition. The effect of particle size distribution of cereal composition on properties of the biotechnological system of milky cereal product has been established as well. For technology of the developed product the fraction selected cereal composition (Oatmeal : Barley : Rye as a 1 : 1 : 1 with a particle size of 670–1 000 microns has

  10. A Planning Guide for Small and Medium Size Wood Products Companies

    Science.gov (United States)

    Jeff Howe; Stephen Bratkovich

    2005-01-01

    At the beginning of the 21st century, North American wood products companies are facing competitive pressure from numerous sources. Traditional products are being manufactured in new regions (e.g., China and the developing nations), and substitute products are being developed by competing industries (e.g., plastics and composites). The bottom line is strained by...

  11. Clustered lot quality assurance sampling to assess immunisation coverage: increasing rapidity and maintaining precision.

    Science.gov (United States)

    Pezzoli, Lorenzo; Andrews, Nick; Ronveaux, Olivier

    2010-05-01

    Vaccination programmes targeting disease elimination aim to achieve very high coverage levels (e.g. 95%). We calculated the precision of different clustered lot quality assurance sampling (LQAS) designs in computer-simulated surveys to provide local health officers in the field with preset LQAS plans to simply and rapidly assess programmes with high coverage targets. We calculated sample size (N), decision value (d) and misclassification errors (alpha and beta) of several LQAS plans by running 10 000 simulations. We kept the upper coverage threshold (UT) at 90% or 95% and decreased the lower threshold (LT) progressively by 5%. We measured the proportion of simulations with d unvaccinated individuals if the coverage was LT% (pLT) to calculate alpha (1-pLT). We divided N in clusters (between 5 and 10) and recalculated the errors hypothesising that the coverage would vary in the clusters according to a binomial distribution with preset standard deviations of 0.05 and 0.1 from the mean lot coverage. We selected the plans fulfilling these criteria: alpha LQAS plans dividing the lot in five clusters with N = 50 (5 x 10) and d = 4 to evaluate programmes with 95% coverage target and d = 7 to evaluate programmes with 90% target. These plans will considerably increase the feasibility and the rapidity of conducting the LQAS in the field.

  12. Productivity growth, case mix and optimal size of hospitals. A 16-year study of the Norwegian hospital sector.

    Science.gov (United States)

    Anthun, Kjartan Sarheim; Kittelsen, Sverre Andreas Campbell; Magnussen, Jon

    2017-04-01

    This paper analyses productivity growth in the Norwegian hospital sector over a period of 16 years, 1999-2014. This period was characterized by a large ownership reform with subsequent hospital reorganizations and mergers. We describe how technological change, technical productivity, scale efficiency and the estimated optimal size of hospitals have evolved during this period. Hospital admissions were grouped into diagnosis-related groups using a fixed-grouper logic. Four composite outputs were defined and inputs were measured as operating costs. Productivity and efficiency were estimated with bootstrapped data envelopment analyses. Mean productivity increased by 24.6% points from 1999 to 2014, an average annual change of 1.5%. There was a substantial growth in productivity and hospital size following the ownership reform. After the reform (2003-2014), average annual growth was case mix between hospitals, and thus provides a framework for future studies. The study adds to the discussion on optimal hospital size. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Domain sizing diffraction and deformation degree of Zr-2.5%Nb pressure pipes of national production

    International Nuclear Information System (INIS)

    Banchik, A D; Buoli, D C; Flores, A; Vizcaino, P

    2012-01-01

    The Life Extension Program for the PHWR Embalse power reactor requires the replacement of the original Zr-2, 5% Nb pressure tubes by a new set of Zr-2,5%Nb pressure tubes. It was also decided to make the new set de pressure tubes locally from imported extruded tubes. As the mechanical properties of pressure tubes in operation depends on the microstructural deformation it is necessary to add to the normal macroscopic quality control same microstructural studies, specially .during the development stage. In the present work x-ray diffraction techniques are applied to determine the magnitude of the micro-structural deformation of three pressure tubes obtained Zr-2,5% Nb extruded tubes that were processes following designer specifications. The pressure tubes were obtained by two step of plastic deformation in a HPTR 60-120 tube rolling machine without intermediate annealing and a final thermal treatment. The line width at half height (FWHM) diffraction lines diagrams are drawn in a Williamson - Hall plot to determine the size of the coherent diffraction domains and estimate the degree of micro-structural deformation. To evaluate the possible effects of texture and/or anisotropy the X-ray measurement were made at the three principal directions of the processed tubes. In summary, the three pressure tubes obtained follow the same average Williamson-Hall line and similar dispersion with respect to that line. That result implies an acceptable homogeneity between the micro-deformation of these pressure tubes. As then have been chosen at random from a lot of preceded pressure tubes, it is possible to predict similar conclusions for the entire batch (author)

  14. Founding weaver ant queens (Oecophylla longinoda) increase production and nanitic worker size when adopting non-nestmate pupae

    DEFF Research Database (Denmark)

    Ouagoussounon, Issa; Offenberg, Joachim; Sinzogan, Antonio

    2015-01-01

    Weaver ants (Oecophylla longinoda Latreille) are used commercially to control pest insects and for protein production. In this respect fast colony growth is desirable for managed colonies. Transplantation of non-nestmate pupae to incipient colonies has been shown to boost colony growth. Our...... of 300 pupae increased total colony size more than 10-fold whereas 100 pupae increased the size 5.6 fold, compared to control. This increase was due not only to the individuals added in the form of pupae but also to an increased per capita brood production by the resident queen, triggered by the adopted...... objectives were to find the maximum number of pupae a founding queen can handle, and to measure the associated colony growth. Secondly, we tested if transplantation of pupae led to production of larger nanitic workers (defined as unusually small worker ants produced by founding queens in their first batch...

  15. Effect of repeat purchase and dynamic market size on diffusion of an innovative technological consumer product in a segmented market

    DEFF Research Database (Denmark)

    Aggarwal, S.; Gupta, A.; Govindan, K.

    2014-01-01

    creates a spectrum effect in market with an aim to create wider product awareness and influence the market size. Whereas the differentiated promotion strategy plays major role in external influence component in the respective segment and target for adoption by the current potential segment. Previous......This study develops diffusion models for technological consumer products under the marketing environment when a product is marketed in a segmented market and observes two distinctive promotional strategies of mass and differentiated promotion; an under explored study area. Mass promotion strategy...... studies on segmented diffusion models assumed only first time purchase and constant market size which may yield underestimated results and fail to give appropriate insight of the diffusion process. The study develops and validates generalized diffusion models for segmented market incorporating...

  16. Egg and a lot of science: an interdisciplinary experiment

    Directory of Open Access Journals (Sweden)

    M. C. Gayer

    2014-08-01

    Full Text Available Egg and a lot of science: an interdisciplinary experimentGayer, M.C.1,2;Rodrigues, D.T.1,2; Escoto, D.F.1; Denardin, E.L.G.2, Roehrs, R.1,21Interdisciplinary Research Group on Teaching Practice, Graduate Program in Biochemistry, Unipampa, RS, Brazil2Laboratory of Physicochemical Studies and Natural Products, Post Graduate Program in Biochemistry, Unipampa, RS, BrazilIntroduction: How to tell if an egg is rotten? How to calculate the volume of an egg? Because the rotten egg float? Why has this characteristic rotten egg smell? Because the gray-green color is formed on the surface of the cooked egg yolk? These issues are commonplace and unnoticed in day-to-day. Our grandmothers know how to tell if an egg is rotten or not, you just put the egg in a glass of water. If it is rotten floating, sinking is good. But why this happens? That they do not know answer. With only one egg chemical reactions work, macromolecules (proteins, density, membranes and conservation of matter. Hydrogen sulphide is responsible for the aroma of a freshly cooked egg. This gas as they break down the molecules of albumin, a protein present in the egg is formed. The color comes from a sulfide precipitation, this time with the Fe2+ ion contained in the yolk (Fe2+ + S2  FeS. The use of simple and easy to perform experiments, correlating various knowledge proves a very useful tool in science education. Objectives: Develop multidisciplinary learning contents through the problem. Materials and methods: The teacher provides students with a boiled egg, salt, a syringe and a cup, a plate and water. The teacher lays the aforementioned issues for students and allows them to exchange information with each other, seeking answers through experimentation. Results and discussion: Students engaged with the activity and interaction of groups in order to solve the proposed problem. Still, through trial and error have sought in various ways to find the answers. This tool takes the student to

  17. Influence of product innovations on financial performance of small and medium-sized enterprises in the Czech Republic

    Directory of Open Access Journals (Sweden)

    Jakub Tabas

    2012-01-01

    Full Text Available Objective of this article is to determine possible effect of product innovations on the financial performance of small and medium-sized enterprises in the Czech Republic. The pilot research has been realized on the statistical sample of 100 companies which were categorized into three basic groups; service companies, trade companies, and production companies. As the measure of innovation effect, the authors applied the deviation of production power, i.e. the ration of EBIT to assets, of a business entity from the industry average while the industry average of production power was selected especially in order to reduce the influence of the economy cycles. In the three categories of companies, different effects of product innovations have been observed. In the service companies and trade companies, the positive effect is limited because of potential simplicity of imitation by competitors. More positive effect of product innovations has been observed in production companies which can protect the products or production processes better then service companies or trade companies where the product innovations are mostly connected with extension of extension of services portfolio offered. For the conclusion, the authors provide suppositions and designs for their future research in this problem of innovations’ effectiveness measurement.

  18. Size-dependent production of radicals in catalyzed reduction of Eosin Y using gold nanorods

    Energy Technology Data Exchange (ETDEWEB)

    Weng, Guojun; Qi, Ying; Li, Jianjun; Zhao, Junwu, E-mail: nanoptzhao@163.com [Xi’an Jiaotong University, The Key Laboratory of Biomedical Information Engineering of Ministry of Education, School of Life Science and Technology (China)

    2015-09-15

    Gold nanostructures have been widely used as catalysts for chemical processes, energy conversion, and pollution control. The size of gold nanocatalysts is thus paramount for their catalytic activity. In this paper, gold nanorods with different sizes were prepared by means of the improved seeding growth approach by adding aromatic additive. The sizes and aspect ratios of the obtained gold nanorods were calculated according to the TEM characterization. Then, we studied the catalytic activities of gold nanorods using a model reaction based on the reduction of Eosin Y by NaBH{sub 4}. By monitoring the absorption intensities of the radicals induced by gold nanorods in real time, we observed the clear size-dependent activity in the conversion of EY{sup 2−} to EY{sup 3−}. The conversion efficiency indicated that the gold nanorods with the smallest size were catalytically the most active probably due to their high number of coordinatively unsaturated surface atoms. In addition, a compensation effect dominated by the surface area of nanorods was observed in this catalytic reduction, which could be primarily attributed to the configuration of Eosin Y absorbed onto the surfaces of gold nanorods.

  19. Size-dependent production of radicals in catalyzed reduction of Eosin Y using gold nanorods

    International Nuclear Information System (INIS)

    Weng, Guojun; Qi, Ying; Li, Jianjun; Zhao, Junwu

    2015-01-01

    Gold nanostructures have been widely used as catalysts for chemical processes, energy conversion, and pollution control. The size of gold nanocatalysts is thus paramount for their catalytic activity. In this paper, gold nanorods with different sizes were prepared by means of the improved seeding growth approach by adding aromatic additive. The sizes and aspect ratios of the obtained gold nanorods were calculated according to the TEM characterization. Then, we studied the catalytic activities of gold nanorods using a model reaction based on the reduction of Eosin Y by NaBH 4 . By monitoring the absorption intensities of the radicals induced by gold nanorods in real time, we observed the clear size-dependent activity in the conversion of EY 2− to EY 3− . The conversion efficiency indicated that the gold nanorods with the smallest size were catalytically the most active probably due to their high number of coordinatively unsaturated surface atoms. In addition, a compensation effect dominated by the surface area of nanorods was observed in this catalytic reduction, which could be primarily attributed to the configuration of Eosin Y absorbed onto the surfaces of gold nanorods

  20. Size-dependent production of radicals in catalyzed reduction of Eosin Y using gold nanorods

    Science.gov (United States)

    Weng, Guojun; Qi, Ying; Li, Jianjun; Zhao, Junwu

    2015-09-01

    Gold nanostructures have been widely used as catalysts for chemical processes, energy conversion, and pollution control. The size of gold nanocatalysts is thus paramount for their catalytic activity. In this paper, gold nanorods with different sizes were prepared by means of the improved seeding growth approach by adding aromatic additive. The sizes and aspect ratios of the obtained gold nanorods were calculated according to the TEM characterization. Then, we studied the catalytic activities of gold nanorods using a model reaction based on the reduction of Eosin Y by NaBH4. By monitoring the absorption intensities of the radicals induced by gold nanorods in real time, we observed the clear size-dependent activity in the conversion of EY2- to EY3-. The conversion efficiency indicated that the gold nanorods with the smallest size were catalytically the most active probably due to their high number of coordinatively unsaturated surface atoms. In addition, a compensation effect dominated by the surface area of nanorods was observed in this catalytic reduction, which could be primarily attributed to the configuration of Eosin Y absorbed onto the surfaces of gold nanorods.

  1. Production of Concentrated Pickering Emulsions with Narrow Size Distributions Using Stirred Cell Membrane Emulsification.

    Science.gov (United States)

    Manga, Mohamed S; York, David W

    2017-09-12

    Stirred cell membrane emulsification (SCME) has been employed to prepare concentrated Pickering oil in water emulsions solely stabilized by fumed silica nanoparticles. The optimal conditions under which highly stable and low-polydispersity concentrated emulsions using the SCME approach are highlighted. Optimization of the oil flux rates and the paddle stirrer speeds are critical to achieving control over the droplet size and size distribution. Investigating the influence of oil volume fraction highlights the criticality of the initial particle loading in the continuous phase on the final droplet size and polydispersity. At a particle loading of 4 wt %, both the droplet size and polydispersity increase with increasing of the oil volume fraction above 50%. As more interfacial area is produced, the number of particles available in the continuous phase diminishes, and coincidently a reduction in the kinetics of particle adsorption to the interface resulting in larger polydisperse droplets occurs. Increasing the particle loading to 10 wt % leads to significant improvements in both size and polydispersity with oil volume fractions as high as 70% produced with coefficient of variation values as low as ∼30% compared to ∼75% using conventional homogenization techniques.

  2. Lean production and ERP systems in small- and medium-sized enterprises : ERP support for pull production

    NARCIS (Netherlands)

    Powell, D.; Riezebos, J.; Strandhagen, J.O.

    2013-01-01

    It is generally accepted that lean production improves manufacturing processes through the systematic application of lean practices, and equally assumed that present day IT systems, particularly ERP systems, are essential for companies seeking efficiency through organisational integration. Though

  3. Influence of the Collection Season on Production, Size, and Chemical Composition of Bee Pollen Produced by Apis Mellifera L.

    Directory of Open Access Journals (Sweden)

    Negrão Adriana F.

    2014-12-01

    Full Text Available The aim of our study was to investigate how the collection period affects and influences the production, chemical composition, and size of bee pollen loads (0.5, 1.0, 2.0, greater than 2.0 mm. The results showed there was a predominance of pollen loads with a diameter greater than 2.0 mm in all the production seasons. For all the seasons, there were no differences in protein content between the particle sizes. But when comparing 0.5 mm during the different periods, there were significant differences; the highest value was found during the winter (24.39 ± 3.7%. As far as lipids and crude fiber are concerned, we obtained differences between the same granulometry sizes for the spring and summer seasons. As for ashes, the results showed differences between different particle sizes for the summer and autumn seasons. Our results have shown that regardless of pollen particle size, its quality was not altered, suggesting that smaller loads can be commercially used by containing nutritional quality or else be used by beekeepers as a supplement during periods of food scarcity.

  4. β-Glucan Size Controls Dectin-1-Mediated Immune Responses in Human Dendritic Cells by Regulating IL-1β Production

    Directory of Open Access Journals (Sweden)

    Matthew J. Elder

    2017-07-01

    Full Text Available Dectin-1/CLEC7A is a pattern recognition receptor that recognizes β-1,3 glucans, and its stimulation initiates signaling events characterized by the production of inflammatory cytokines from human dendritic cells (DCs required for antifungal immunity. β-glucans differ greatly in size, structure, and ability to activate effector immune responses from DC; as such, small particulate β-glucans are thought to be poor activators of innate immunity. We show that β-glucan particle size is a critical factor contributing to the secretion of cytokines from human DC; large β-glucan-stimulated DC generate significantly more IL-1β, IL-6, and IL-23 compared to those stimulated with the smaller β-glucans. In marked contrast, the secretion of TSLP and CCL22 were found to be insensitive to β-glucan particle size. Furthermore, we show that the capacity to induce phagocytosis, and the relative IL-1β production determined by β-glucan size, regulates the composition of the cytokine milieu generated from DC. This suggests that β-glucan particle size is critically important in orchestrating the nature of the immune response to fungi.

  5. Determination of production-shipment policy using a two-phase algebraic approach

    Directory of Open Access Journals (Sweden)

    Huei-Hsin Chang

    2012-04-01

    Full Text Available The optimal production-shipment policy for end products using mathematicalmodeling and a two-phase algebraic approach is investigated. A manufacturing systemwith a random defective rate, a rework process, and multiple deliveries is studied with thepurpose of deriving the optimal replenishment lot size and shipment policy that minimisestotal production-delivery costs. The conventional method uses differential calculus on thesystem cost function to determine the economic lot size and optimal number of shipmentsfor such an integrated vendor-buyer system, whereas the proposed two-phase algebraicapproach is a straightforward method that enables practitioners who may not havesufficient knowledge of calculus to manage real-world systems more effectively.

  6. New product introduction and capacity investment by incumbents: Effects of size on strategy

    NARCIS (Netherlands)

    Dawid, H.; Kopel, M.; Kort, P.M.

    2013-01-01

    We analyze a duopoly where capacity-constrained firms offer an established product and have the option to offer an additional new and differentiated product. We show that the firm with the smaller capacity on the established market has a higher incentive to innovate and reaches a larger market share

  7. Exploring the influence of technology size on the duration of production technology transfer implementation

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2005-01-01

    This study explores the relationship between technology size and installation time in technology transfer projects. A literature study revealed that the installation time has so far not received much attention. Current studies address the effectiveness of technology transfer rather than efficiency.

  8. Can “Cleaned and Greened” Lots Take on the Role of Public Greenspace?

    Science.gov (United States)

    Megan Heckert; Michelle Kondo

    2018-01-01

    Cities are increasingly greening vacant lots to reduce blight. Such programs could reduce inequities in urban greenspace access, but whether and how greened lots are used remains unclear. We surveyed three hundred greened lots in Philadelphia for signs of use and compared characteristics of used and nonused lots. We found physical signs of use that might be found in...

  9. Study of Different Priming Treatments on Germination Traits of Soybean Seed Lots

    Directory of Open Access Journals (Sweden)

    Hossein Reza ROUHI

    2011-03-01

    Full Text Available Oilseeds are more susceptible to deterioration due to membrane disruption, high free fatty acid level in seeds and free radical production. These factors are tended to less vigorous seed. Priming treatments have been used to accelerate the germination and seedling growth in most of the crops under normal and stress conditions. For susceptible and low vigor soybean seed, this technique would be a promising method. At first, in separate experiment, effects of hydropriming for (12, 24, 36 and 48 h with control (none prime were evaluated on germination traits of soybean seed lots cv. �Sari� (include 2 drying method and 3 harvest moisture. Then, next experiment was conducted to determination the best combination of osmopriming in soybean seed lots, hence 3 osmotic potential level (-8, -10 and -12 bar at 4 time (12, 24, 36 and 48 h were compared. Analysis of variance showed that, except for seedling dry weight, the other traits include standard germination, germination rate, seedling length and vigor index were influenced by osmopriming. Hydropriming had no effect on these traits and decreased rate of germination. Finally the best combination of osmopriming were osmotic potential -12 bar at 12 hours for time, that submitted acceptable result in all conditions and recommended for soybean seed lots cv. �Sari�.

  10. Study of Different Priming Treatments on Germination Traits of Soybean Seed Lots

    Directory of Open Access Journals (Sweden)

    Hossein Reza ROUHI

    2011-03-01

    Full Text Available Oilseeds are more susceptible to deterioration due to membrane disruption, high free fatty acid level in seeds and free radical production. These factors are tended to less vigorous seed. Priming treatments have been used to accelerate the germination and seedling growth in most of the crops under normal and stress conditions. For susceptible and low vigor soybean seed, this technique would be a promising method. At first, in separate experiment, effects of hydropriming for (12, 24, 36 and 48 h with control (none prime were evaluated on germination traits of soybean seed lots cv. Sari (include 2 drying method and 3 harvest moisture. Then, next experiment was conducted to determination the best combination of osmopriming in soybean seed lots, hence 3 osmotic potential level (-8, -10 and -12 bar at 4 time (12, 24, 36 and 48 h were compared. Analysis of variance showed that, except for seedling dry weight, the other traits include standard germination, germination rate, seedling length and vigor index were influenced by osmopriming. Hydropriming had no effect on these traits and decreased rate of germination. Finally the best combination of osmopriming were osmotic potential -12 bar at 12 hours for time, that submitted acceptable result in all conditions and recommended for soybean seed lots cv. Sari.

  11. Extending cluster Lot Quality Assurance Sampling designs for surveillance programs

    OpenAIRE

    Hund, Lauren; Pagano, Marcello

    2014-01-01

    Lot quality assurance sampling (LQAS) has a long history of applications in industrial quality control. LQAS is frequently used for rapid surveillance in global health settings, with areas classified as poor or acceptable performance based on the binary classification of an indicator. Historically, LQAS surveys have relied on simple random samples from the population; however, implementing two-stage cluster designs for surveillance sampling is often more cost-effective than ...

  12. 3. A 40-years record of the polymetallic pollution of the Lot River system, France

    Science.gov (United States)

    Audry, S.; Schäfer, J.; Blanc, G.; Veschambre, S.; Jouanneau, J.-M.

    2003-04-01

    The Lot River system (southwest France) is known for historic Zn and Cd pollution that originates from Zn ore treatment in the small Riou-Mort watershed and affects seafood production in the Gironde Estuary. We present a sedimentary record from 2 cores taken in a dam lake downstream of the Riou-Mort watershed covering the evolution of metal inputs into the Lot River over the past 40 years (1960-2001). Depth profiles of Cd, Zn, Cu and Pb concentrations are comparable indicating common sources and transport. The constant Zn/Cd ratio (˜50) observed in the sediment cores is similar to that in SPM from the Riou-Mort watershed, indicating the dominance of point source pollution upon the geochemical background signal. Cadmium, Zn, Cu and Pb concentrations in the studied sediment cores show an important peak in 42-44 cm depth with up to 300 mg.kg-1 (Cd), 10,000 mg.kg-1 (Zn), 150 mg.kg-1 (Cu) and 930 mg.kg-1 (Pb). These concentrations are much higher than geochemical background values; For example, Cd concentrations are more than 350-fold higher than those measured in the same riverbed upstream the confluence with the Riou-Mort River. This peak coincides with the upper 137Cs peak resulting from the Chernobyl accident (1986). Therefore, this heavy metal peak is attributed to the latest accidental Cd pollution of the Lot-River in 1986. Several downward heavy metal peaks reflect varying input probably due to changes in industrial activities within the Riou-Mort watershed. Given mean sedimentation rate of about 2 cm.yr-1, the record suggests constant and much lower heavy metal concentrations since the early nineties due to restriction of industrial activities and remediation efforts in the Riou-Mort watershed. Nevertheless, Cd, Zn, Cu and Pb concentrations in the upper sediment remain high, compared to background values from reference sites in the upper Lot River system.

  13. Business Management Practices for Small to Medium Sized Forest Products Firms

    OpenAIRE

    Espinoza, Omar Alejandro; Smith, Robert L. (Robert Lee), 1955 August 21-

    2015-01-01

    This book offers advice and information for starting and guiding a small forest products business. It emphasizes the importance of business planning, human resource planning, marketing, and operations and financial management.

  14. Business Management Practices for Small to Medium Sized Forest Products Firms

    OpenAIRE

    Espinoza, Omar Alejandro; Smith, Robert L. (Robert Lee), 1955 August 21-

    2015-01-01

    Provides the information required to start a small forest products company by discussing the U.S. forest products industry, business management, strategic planning, business plans, and management of human resources, marketing, operations, and finances. This project was supported by the Wood Education and Resource Center, Northeastern Area State and Private Forestry, Forest Service, U.S. Department of Agriculture, award number: 2010-DG-148.

  15. Silicon microfluidic flow focusing devices for the production of size-controlled PLGA based drug loaded microparticles.

    Science.gov (United States)

    Keohane, Kieran; Brennan, Des; Galvin, Paul; Griffin, Brendan T

    2014-06-05

    The increasing realisation of the impact of size and surface properties on the bio-distribution of drug loaded colloidal particles has driven the application of micro fabrication technologies for the precise engineering of drug loaded microparticles. This paper demonstrates an alternative approach for producing size controlled drug loaded PLGA based microparticles using silicon Microfluidic Flow Focusing Devices (MFFDs). Based on the precise geometry and dimensions of the flow focusing channel, microparticle size was successfully optimised by modifying the polymer type, disperse phase (Qd) flow rate, and continuous phase (Qc) flow rate. The microparticles produced ranged in sizes from 5 to 50 μm and were highly monodisperse (coefficient of variation <5%). A comparison of Ciclosporin (CsA) loaded PLGA microparticles produced by MFFDs vs conventional production techniques was also performed. MFFDs produced microparticles with a narrower size distribution profile, relative to the conventional approaches. In-vitro release kinetics of CsA was found to be influenced by the production technique, with the MFFD approach demonstrating the slowest rate of release over 7 days (4.99 ± 0.26%). Finally, MFFDs were utilised to produce pegylated microparticles using the block co-polymer, PEG-PLGA. In contrast to the smooth microparticles produced using PLGA, PEG-PLGA microparticles displayed a highly porous surface morphology and rapid CsA release, with 85 ± 6.68% CsA released after 24h. The findings from this study demonstrate the utility of silicon MFFDs for the precise control of size and surface morphology of PLGA based microparticles with potential drug delivery applications. Copyright © 2014 Elsevier B.V. All rights reserved.

  16. System design study of a membrane reforming hydrogen production plant using a small sized sodium cooled reactor

    International Nuclear Information System (INIS)

    Chikazawa, Y.; Konomura, M.; Hori, T.; Sato, H.; Uchida, S.

    2004-01-01

    In this study, a membrane reforming hydrogen production plant using a small sized sodium cooled reactor was designed as one of promising concepts. In the membrane reformer, methane and steam are reformed into carbon dioxide and hydrogen with sodium heat at a temperature 500 deg-C. In the equilibrium condition, steam reforming proceeds with catalyst at a temperature more than 800 deg-C. Using membrane reformers, the steam reforming temperature can be decreased from 800 to 500 deg-C because the hydrogen separation membrane removes hydrogen selectively from catalyst area and the partial pressure of hydrogen is kept much lower than equilibrium condition. In this study, a hydrogen and electric co-production plant has been designed. The reactor thermal output is 375 MW and 25% of the thermal output is used for hydrogen production (70000 Nm 3 /h). The hydrogen production cost is estimated to 21 yen/Nm 3 but it is still higher than the economical goal (17 yen/Nm 3 ). The major reason of the high cost comes from the large size of hydrogen separation reformers because of the limit of hydrogen separation efficiency of palladium membrane. A new highly efficient hydrogen separation membrane is needed to reduce the cost of hydrogen production using membrane reformers. There is possibility of multi-tube failure in the membrane reformers. In future study, a design of measures against tube failure and elemental experiments of reaction between sodium and reforming gas will be needed. (authors)

  17. Classification and Processing Optimization of Barley Milk Production Using NIR Spectroscopy, Particle Size, and Total Dissolved Solids Analysis

    Directory of Open Access Journals (Sweden)

    Jasenka Gajdoš Kljusurić

    2015-01-01

    Full Text Available Barley is a grain whose consumption has a significant nutritional benefit for human health as a very good source of dietary fibre, minerals, vitamins, and phenolic and phytic acids. Nowadays, it is more and more often used in the production of plant milk, which is used to replace cow milk in the diet by an increasing number of consumers. The aim of the study was to classify barley milk and determine the optimal processing conditions in barley milk production based on NIR spectra, particle size, and total dissolved solids analysis. Standard recipe for barley milk was used without added additives. Barley grain was ground and mixed in a blender for 15, 30, 45, and 60 seconds. The samples were filtered and particle size of the grains was determined by laser diffraction particle sizing. The plant milk was also analysed using near infrared spectroscopy (NIRS, in the range from 904 to 1699 nm. Furthermore, conductivity of each sample was determined and microphotographs were taken in order to identify the structure of fat globules and particles in the barley milk. NIR spectra, particle size distribution, and conductivity results all point to 45 seconds as the optimal blending time, since further blending results in the saturation of the samples.

  18. Observations concerning the particle-size of the oxidation products of uranium formed in air or in carbon dioxide

    International Nuclear Information System (INIS)

    Baque, P.; Leclercq, D.

    1964-01-01

    This report brings together the particle-size analysis results obtained on products formed by the oxidation or the ignition of uranium in moist air or dry carbon dioxide. The results bring out the importance of the nature of the oxidising atmosphere, the combustion in moist air giving rise to the formation of a larger proportion of fine particles than combustion in carbon dioxide under pressure. (authors) [fr

  19. Measurement of activity-weighted size distributions of radon decay products in a normally occupied home

    International Nuclear Information System (INIS)

    Hopke, P.K.; Wasiolek, P.; Montassier, N.; Cavallo, A.; Gadsby, K.; Socolow, R.

    1992-01-01

    In order to assess the exposure of individuals to the presence of indoor radioactivity arising from the decay of radon, an automated, semicontinuous graded screen array system was developed to permit the measurement of the activity-weighted size distributions of the radon progeny in homes. The system has been modified so that the electronics and sampling heads can be separated from the pump by approximately 15 m. The system was placed in the living room of a one-storey house with basement in Princeton, NJ and operated for 2 weeks while the house was occupied by the home owners in their normal manner. One of the house occupants was a cigarette smoker. Radon and potential alpha energy concentration (PAEC) measurements were also made, but condensation nuclei counts were not performed. PAEC values ranged from 23.4 to 461.6 mWL. In the measured activity size distributions, the amount of activity in the 0.5-1.5 nm size range can be considered to be the unattached fraction. The mean value for the 218 Po unattached fraction is 0.217 with a range of 0.054-0.549. The median value for the unattached fraction of PAEC is 0.077 with a range of 0.022-0.178. (author)

  20. Rates of molecular evolution in tree ferns are associated with body size, environmental temperature, and biological productivity.

    Science.gov (United States)

    Barrera-Redondo, Josué; Ramírez-Barahona, Santiago; Eguiarte, Luis E

    2018-05-01

    Variation in rates of molecular evolution (heterotachy) is a common phenomenon among plants. Although multiple theoretical models have been proposed, fundamental questions remain regarding the combined effects of ecological and morphological traits on rate heterogeneity. Here, we used tree ferns to explore the correlation between rates of molecular evolution in chloroplast DNA sequences and several morphological and environmental factors within a Bayesian framework. We revealed direct and indirect effects of body size, biological productivity, and temperature on substitution rates, where smaller tree ferns living in warmer and less productive environments tend to have faster rates of molecular evolution. In addition, we found that variation in the ratio of nonsynonymous to synonymous substitution rates (dN/dS) in the chloroplast rbcL gene was significantly correlated with ecological and morphological variables. Heterotachy in tree ferns may be influenced by effective population size associated with variation in body size and productivity. Macroevolutionary hypotheses should go beyond explaining heterotachy in terms of mutation rates and instead, should integrate population-level factors to better understand the processes affecting the tempo of evolution at the molecular level. © 2018 The Author(s). Evolution © 2018 The Society for the Study of Evolution.

  1. Particle size fractionation of paralytic shellfish toxins (PSTs): seasonal distribution and bacterial production in the St Lawrence estuary, Canada.

    Science.gov (United States)

    Michaud, S; Levasseur, M; Doucette, G; Cantin, G

    2002-10-01

    We determined the seasonal distribution of paralytic shellfish toxins (PSTs) and PST producing bacteria in > 15, 5-15, and 0.22-5 microm size fractions in the St Lawrence. We also measured PSTs in a local population of Mytilus edulis. PST concentrations were determined in each size fraction and in laboratory incubations of sub-samples by high performance liquid chromatography (HPLC), including the rigorous elimination of suspected toxin 'imposter' peaks. Mussel toxin levels were determined by mouse bioassay and HPLC. PSTs were detected in all size fractions during the summer sampling season, with 47% of the water column toxin levels associated with particles smaller than Alexandrium tamarense ( 15 microm size fraction, we estimated that as much as 92% of PSTs could be associated with particles other than A. tamarense. Our results stress the importance of taking into account the potential presence of PSTs in size fractions other than that containing the known algal producer when attempting to model shellfish intoxication, especially during years of low cell abundance. Finally, our HPLC results confirmed the presence of bacteria capable of autonomous PST production in the St Lawrence as well as demonstrating their regular presence and apparent diversity in the plankton. Copyright 2002 Elsevier Science Ltd.

  2. Female fruit production depends on female flower production and crown size rather than male density in a continuous population of a tropical dioecious tree (Virola surinamensis).

    Science.gov (United States)

    Riba-Hernández, Pablo; Segura, Jorge Lobo; Muñoz-Valverde, Jenny

    2016-11-01

    Factors related to pollen and resource limitation were evaluated to predict female fruit production in a tropical dioecious tree. Pollen limitation via variation in the male density at local scales is expected to limit female reproduction success in dioecious plants. We modeled the roles of local male density, female crown size, crown illumination, and female flower production on female fruit initiation and mature fruit production in a continuous population (62 ha plot) of a tropical dioecious tree (Virola surinamensis). In addition, we used microsatellites to describe the scale of effective pollen flow, the male effective population size, and the spatial genetic structure within/between progenies and males. The local male density was not related to female fruit initiation or mature fruit production. Female floral production had a positive effect on fruit initiation. The female crown size was positively related to fruit maturation. Seeds from the same female and seeds from different but spatially proximal females were generally half-siblings; however, proximal females showed greater variation. Proximal male-female adult pairs were not significantly more genetically related than distant pairs. The probability of paternity was negatively affected by the distance between seeds and males; most effective pollen dispersal events (∼85%) occurred from males located less than 150 m from females. The number of males siring progenies was greater than the number of males found at local scales. Female fecundity in this continuous population of Virola surinamensis is not limited by the availability of pollen from proximal males. Rather, resource allocation to floral production may ultimately determine female reproductive success. © 2016 Botanical Society of America.

  3. The OHS management system in the "small-sized" production company

    Directory of Open Access Journals (Sweden)

    Dorota Klimecka-Tatar

    2016-12-01

    Full Text Available In the article the problem with systemic management of safety in the smallest production entities has been shown. The effect of health and safety management system and the benefits resulting from it for the most numerous economic entities in Poland - microenterprises have been discussed. Moreover, the results of questionnaire examination conducted in several Polish production companies have been presented. Surveys were completed in companies in which the number of employees does not exceed 49 people (micro enterprise - from 1 to 9 employees and small enterprises - from 10 to 49 employees.

  4. Lot quality assurance sampling techniques in health surveys in developing countries: advantages and current constraints.

    Science.gov (United States)

    Lanata, C F; Black, R E

    1991-01-01

    Traditional survey methods, which are generally costly and time-consuming, usually provide information at the regional or national level only. The utilization of lot quality assurance sampling (LQAS) methodology, developed in industry for quality control, makes it possible to use small sample sizes when conducting surveys in small geographical or population-based areas (lots). This article describes the practical use of LQAS for conducting health surveys to monitor health programmes in developing countries. Following a brief description of the method, the article explains how to build a sample frame and conduct the sampling to apply LQAS under field conditions. A detailed description of the procedure for selecting a sampling unit to monitor the health programme and a sample size is given. The sampling schemes utilizing LQAS applicable to health surveys, such as simple- and double-sampling schemes, are discussed. The interpretation of the survey results and the planning of subsequent rounds of LQAS surveys are also discussed. When describing the applicability of LQAS in health surveys in developing countries, the article considers current limitations for its use by health planners in charge of health programmes, and suggests ways to overcome these limitations through future research. It is hoped that with increasing attention being given to industrial sampling plans in general, and LQAS in particular, their utilization to monitor health programmes will provide health planners in developing countries with powerful techniques to help them achieve their health programme targets.

  5. An exploration on new product development process of Malaysian small-sized automaker

    NARCIS (Netherlands)

    Boejang, H.; Hambali, A.; Hassan, M.Z.; Esa, S.; Rauterberg, G.W.M.

    2017-01-01

    This paper focused on the identification and description of a new product development (NPD) approach adopted by one of the smallsized car producers in Malaysia. The NPD processes for European, Japanese and American auto makers have been studied and discussed in literature. However, the business

  6. Frankincense production is determined by tree size and tapping frequency and intensity

    NARCIS (Netherlands)

    Eshete, A.; Sterck, F.J.; Bongers, F.

    2012-01-01

    Resin production in trees probably depends on trade-offs within the tree, its environment and on tapping activities. Frankincense, the highly esteemed resin from dry woodland frankincense trees of Boswellia papyrifera is exploited in traditional ways for millennia. New exploitation practices lead to

  7. Age and size effects on seed productivity of northern black spruce

    Science.gov (United States)

    J. N. Viglas; C. D. Brown; J. F. Johnstone

    2013-01-01

    Slow-growing conifers of the northern boreal forest may require several decades to reach reproductive maturity, making them vulnerable to increases in disturbance frequency. Here, we examine the relationship between stand age and seed productivity of black spruce (Picea mariana (Mill.) Britton, Sterns & Poggenb.) in Yukon Territory and Alaska....

  8. Film and television production in the Netherlands - a comparison between three medium-sized companies.

    NARCIS (Netherlands)

    Sanders, Willemien; Puijk, Roel

    2014-01-01

    This paper discusses the different ways in which production companies established in similar ways can develop over time. It takes three Dutch private film- and television companies as cases. The research forms part of the Dutch component of a European partnership project, Success in the Film and

  9. Primary production, nutrients, and size spectra of suspended particles in the southern North Sea

    NARCIS (Netherlands)

    Gieskes, W.W.C.

    1972-01-01

    The effect of nutrient enrichment from the Rhine on some major characteristics of the phytoplankton ecosystem of Dutch coastal waters was studied with 14C, liquid scintillation and Coulter Counter techniques. The magnitude of primary production in the most eutrophic waters closest to

  10. How big was it? Systematics of 41Ca production in meter-size extraterrestial objects

    International Nuclear Information System (INIS)

    Klein, J.; Dezfouly-Arjomandy, B.; Lawn, B.; Middleton, R.; Fink, D.; Albrecht, A.; Herzog, G.; Vogt, S.

    1992-01-01

    41 Ca, produced in the iron phase of meteorites by high-energy proton initiated nuclear spallation, has a saturation value of ∼24 dpm/kg-Fe and a concentration that varies only slowly with depth. In the stone phase, 41 Ca is produced by thermal neutron capture, 40 Ca(n,γ) 41 Ca, and the saturation value is expected to be ∼2,000 dpm/kg-Ca. Because neutrons are produced at high energy and must pass through about two meters of material to thermalize, 41 Ca concentrations in the stone phase depend critically on the size of the meteorite during irradiation, and vary as function of sample location. Using accelerator mass spectrometry, the authors have measured 41 Ca in the long core from the Moon collected during Apollo 15, in metallic and stone separates in Jilin, and in several mesosiderites. A framework for interpreting these results in terms of the pre-atmospheric sizes of meteorites is presented

  11. Inequity aversion in a joint economic lot sizing environment with asymmetric holding cost information

    OpenAIRE

    Guido Voigt

    2015-01-01

    Screening contracts (or ‘menu of contracts’) are frequently used for aligning the incentives in supply chains with private information. In this context, it is assumed that all supply chain parties are strictly (expected) profit-maximizing. However, previous empirical work shows that this is a critical assumption. In fact, it seems that inequity adverse subjects are willing to invest money for achieving higher relative payoffs. Interestingly, the classical approach to design incentive compatib...

  12. Coordinated Lot-sizing and Dynamic Prizing under a Supplier All-units Quantity Discount

    Directory of Open Access Journals (Sweden)

    Sandra Transchel

    2008-05-01

    Full Text Available We consider an economic order quantity model where the supplier offers an all-units quantity discount and a price sensitive customer demand. We compare a decentralized decision framework where selling price and replenishment policy are determined independently to simultaneous decision making. Constant and dynamic pricing are distinguished. We derive structural properties and develop algorithms that determine the optimal pricing and replenishment policy and show how quantity discounts not only influence the purchasing strategy but also the pricing policy. A sensitivity analysis indicates the impact of the fixed-holding cost ratio, the discount policy, and the customers' price sensitivity on the optimal decisions.

  13. A hybrid adaptive large neighborhood search heuristic for lot-sizing with setup times

    DEFF Research Database (Denmark)

    Muller, Laurent Flindt; Spoorendonk, Simon; Pisinger, David

    2012-01-01

    This paper presents a hybrid of a general heuristic framework and a general purpose mixed-integer programming (MIP) solver. The framework is based on local search and an adaptive procedure which chooses between a set of large neighborhoods to be searched. A mixed integer programming solver and its......, and the upper bounds found by the commercial MIP solver ILOG CPLEX using state-of-the-art MIP formulations. Furthermore, we improve the best known solutions on 60 out of 100 and improve the lower bound on all 100 instances from the literature...

  14. Identification and quantification of polycarboxylates in detergent products using off-line size exclusion chromatography-nuclear magnetic resonance

    Energy Technology Data Exchange (ETDEWEB)

    Visser, Ilona, E-mail: ilona.visser@unilever.com [Unilever Research and Development Vlaardingen, Olivier van Noortlaan 120, PO box 114, 3130 AC Vlaardingen (Netherlands); Klinkenberg, Monique; Hoos, Peter; Janssen, Hans-Gerd; Duynhoven, John van [Unilever Research and Development Vlaardingen, Olivier van Noortlaan 120, PO box 114, 3130 AC Vlaardingen (Netherlands)

    2009-11-03

    The performance of many contemporary detergent products critically depends on polymers. Water-soluble polycarboxylates represent an important class of detergent polymers, and their quantitative assessment in detergent matrices stands as a considerable challenge. The presence of high levels of surfactants is a major complication, due to the strong tendency of surfactants to form micelles and to interact with the polymers. First, we addressed critical steps in the subsequent combined use of liquid extraction and off-line size exclusion chromatography-nuclear magnetic resonance (SEC-NMR) for identification and quantification of polycarboxylates in detergent products. Next, the different steps in the off-line SEC-NMR procedure were optimized with respect to precision and accuracy. This resulted in recoveries of more than 80% for maleic acid/acrylic acid copolymers; in detergent products a proportional bias of 30% is achieved. The method showed good precision with a relative standard deviation of within-laboratory reproducibility between 5% and 14%.

  15. Identification and quantification of polycarboxylates in detergent products using off-line size exclusion chromatography-nuclear magnetic resonance

    International Nuclear Information System (INIS)

    Visser, Ilona; Klinkenberg, Monique; Hoos, Peter; Janssen, Hans-Gerd; Duynhoven, John van

    2009-01-01

    The performance of many contemporary detergent products critically depends on polymers. Water-soluble polycarboxylates represent an important class of detergent polymers, and their quantitative assessment in detergent matrices stands as a considerable challenge. The presence of high levels of surfactants is a major complication, due to the strong tendency of surfactants to form micelles and to interact with the polymers. First, we addressed critical steps in the subsequent combined use of liquid extraction and off-line size exclusion chromatography-nuclear magnetic resonance (SEC-NMR) for identification and quantification of polycarboxylates in detergent products. Next, the different steps in the off-line SEC-NMR procedure were optimized with respect to precision and accuracy. This resulted in recoveries of more than 80% for maleic acid/acrylic acid copolymers; in detergent products a proportional bias of 30% is achieved. The method showed good precision with a relative standard deviation of within-laboratory reproducibility between 5% and 14%.

  16. Species pool size and realized species richness affect productivity differently: A modeling study

    Czech Academy of Sciences Publication Activity Database

    Stachová, T.; Lepš, Jan

    2010-01-01

    Roč. 36, č. 6 (2010), s. 578-586 ISSN 1146-609X R&D Projects: GA ČR GD206/08/H044; GA MŠk LC06073 Institutional research plan: CEZ:AV0Z50070508 Keywords : biodiversity * ecosystem functioning * diversity-productivity relationship Subject RIV: EH - Ecology, Behaviour OBOR OECD: Ecology Impact factor: 1.460, year: 2010 http://www.sciencedirect.com/science/article/pii/S1146609X10001037

  17. Impacts of facility size and location decisions on ethanol production cost

    International Nuclear Information System (INIS)

    Kocoloski, Matt; Michael Griffin, W.; Scott Matthews, H.

    2011-01-01

    Cellulosic ethanol has been identified as a promising alternative to fossil fuels to provide energy for the transportation sector. One of the obstacles cellulosic ethanol must overcome in order to contribute to transportation energy demand is the infrastructure required to produce and distribute the fuel. Given a nascent cellulosic ethanol industry, locating cellulosic ethanol refineries and creating the accompanying infrastructure is essentially a greenfield problem that may benefit greatly from quantitative analysis. This study models cellulosic ethanol infrastructure investment using a mixed integer program (MIP) that locates ethanol refineries and connects these refineries to the biomass supplies and ethanol demands in a way that minimizes the total cost. For the single- and multi-state regions examined in this study, larger facilities can decrease ethanol costs by $0.20-0.30 per gallon, and placing these facilities in locations that minimize feedstock and product transportation costs can decrease ethanol costs by up to $0.25 per gallon compared to uninformed placement that could result from influences such as local subsidies to encourage economic development. To best benefit society, policies should allow for incentives that encourage these low-cost production scenarios and avoid politically motivated siting of plants. - Research highlights: → Mixed-integer programming can be used to model ethanol infrastructure investment. → Large cellulosic ethanol facilities can decrease production cost by $0.20/gallon. → Optimized facility placement can save $0.25/gallon.

  18. Influence of moisture content, particle size and forming temperature on productivity and quality of rice straw pellets

    Energy Technology Data Exchange (ETDEWEB)

    Ishii, Kazuei, E-mail: k-ishii@eng.hokudai.ac.jp; Furuichi, Toru

    2014-12-15

    Highlights: • Optimized conditions were determined for the production of rice straw pellets. • The moisture content and forming temperature are key factors. • High quality rice pellets in the lower heating value and durability were produced. - Abstract: A large amount of rice straw is generated and left as much in paddy fields, which causes greenhouse gas emissions as methane. Rice straw can be used as bioenergy. Rice straw pellets are a promising technology because pelletization of rice straw is a form of mass and energy densification, which leads to a product that is easy to handle, transport, store and utilize because of the increase in the bulk density. The operational conditions required to produce high quality rice straw pellets have not been determined. This study determined the optimal moisture content range required to produce rice straw pellets with high yield ratio and high heating value, and also determined the influence of particle size and the forming temperature on the yield ratio and durability of rice straw pellets. The optimal moisture content range was between 13% and 20% under a forming temperature of 60 or 80 °C. The optimal particle size was between 10 and 20 mm, considering the time and energy required for shredding, although the particle size did not significantly affect the yield ratio and durability of the pellets. The optimized conditions provided high quality rice straw pellets with nearly 90% yield ratio, ⩾12 MJ/kg for the lower heating value, and >95% durability.

  19. Investigation into reactions of starch with monochloro triazinyl- {beta} Cyclodextrin and Application of their Products in Textile Sizing

    Energy Technology Data Exchange (ETDEWEB)

    Hebeish, A; Higazy, A; El- Shafei, A; Sharaf, S [National Research Center, Textile Research Division, Dokki, Cairo (Egypt)

    2005-07-01

    Chemical modification of starch and hydrolyzed starches through their reaction with reactive cyclodextrin (RCD), namely, monochloro triazinyl-B cyclodextrin was investigated under a variety of conditions. Results obtained signify that the reaction is favoured in alkaline rather than in acidic media and in shorter than larger liquor ratios. Maximization of the reaction could also be achieved at 40 degree C for 60 minutes. Of the several alkaline catalysts used NaOH proved to be the best when used at a concentration of 10 g/1. Reaction of starch and hydrolyzed starches with RCD is determined by concentration of the latter. It brings about polymeric products the apparent viscosity of which depends on both the extent of reaction, expressed as nitrogen percent, and degree of acid hydrolysis prior to the modification. Evidence for involvement of starch and RCD by chemical bonding is evidenced by FTIR analysis. Furthermore the newly synthesized starch based polymeric products were applied to light cotton fabric and evaluation of the sized materials through monitoring size add-on, size removal and strength properties of the fabric made.

  20. Investigation into reactions of starch with monochloro triazinyl- Β Cyclodextrin and Application of their Products in Textile Sizing

    International Nuclear Information System (INIS)

    Hebeish, A.; Higazy, A.; El- Shafei, A.; Sharaf, S.

    2005-01-01

    Chemical modification of starch and hydrolyzed starches through their reaction with reactive cyclodextrin (RCD), namely, monochloro triazinyl-B cyclodextrin was investigated under a variety of conditions. Results obtained signify that the reaction is favoured in alkaline rather than in acidic media and in shorter than larger liquor ratios. Maximization of the reaction could also be achieved at 40 degree C for 60 minutes. Of the several alkaline catalysts used NaOH proved to be the best when used at a concentration of 10 g/1. Reaction of starch and hydrolyzed starches with RCD is determined by concentration of the latter. It brings about polymeric products the apparent viscosity of which depends on both the extent of reaction, expressed as nitrogen percent, and degree of acid hydrolysis prior to the modification. Evidence for involvement of starch and RCD by chemical bonding is evidenced by FTIR analysis. Furthermore the newly synthesized starch based polymeric products were applied to light cotton fabric and evaluation of the sized materials through monitoring size add-on, size removal and strength properties of the fabric made

  1. The Influence Of Profitability, Firm Size, Productivity And Reputation Of The Auditor On The Rating Of Sukuk

    Directory of Open Access Journals (Sweden)

    Galih Estu Pranoto

    2017-07-01

    Full Text Available The purpose of this research is to find out the effect between the profitability, firm size, productivity, and auditor reputation toward rating sukuk. Rating sukuk is the dependent variables in this research were measured by scoring technique based on Pefindo’s rating. For the independent variables in this research, using profitability were measured by return of equity ratio, firm size were measured by natural logarithm of total asset, productivity were measured by comparison sales with employees, auditor reputation using dummy method. This research using secondary data which is non bank companies from Indonesian Stock Exchange Listed Company and rated by Pefindo in 2009-2013. While the sampling method used was purposive method which is overall 35 sample choose. This research uses logistic ordinal regression to test the hypothesis with SPSS computer program. The research result show that produktivity and auditor reputation partially have a significant negative influence toward rating sukuk, while profitability and firm size have no significant influence toward rating sukuk.

  2. Impacts of Limestone Multi-particle Size on Production Performance, Egg Shell Quality, and Egg Quality in Laying Hens

    Directory of Open Access Journals (Sweden)

    X. Y. Guo

    2012-06-01

    Full Text Available This experiment was conducted to evaluate the effects of single or multi-particle size limestone on the egg shell quality, egg production, egg quality and feed intake in laying hens. A total of 280 laying hens (ISA brown were used in this 10-wk trial. Laying hens were randomly assigned to 4 treatments with 14 replications per treatment and 5 adjacent cages as a replication (hens were caged individually. The experimental treatments were: i L, basal diet+10% large particle limestone; ii LS1, basal diet+8% large particle limestone+2% small particle limestone; iii LS2, basal diet+6% large particle limestone+4% small particle limestone; iv S, basal diet+10% small particle limestone. The egg production was unaffected by dietary treatments. The egg weight in S treatment was lighter than other treatments (p<0.05. The egg specific gravity in S treatment was lower than other treatments (p<0.05. The eggshell strength and eggshell thickness in S treatment were decreased when compared with other dietary treatments (p<0.05. The laying hens in LS1 and LS2 treatment had a higher average feed intake than the other two treatments (p<0.05. Collectively, the dietary multi-particle size limestone supplementation could be as efficient as large particle size limestone.

  3. Influence of moisture content, particle size and forming temperature on productivity and quality of rice straw pellets

    International Nuclear Information System (INIS)

    Ishii, Kazuei; Furuichi, Toru

    2014-01-01

    Highlights: • Optimized conditions were determined for the production of rice straw pellets. • The moisture content and forming temperature are key factors. • High quality rice pellets in the lower heating value and durability were produced. - Abstract: A large amount of rice straw is generated and left as much in paddy fields, which causes greenhouse gas emissions as methane. Rice straw can be used as bioenergy. Rice straw pellets are a promising technology because pelletization of rice straw is a form of mass and energy densification, which leads to a product that is easy to handle, transport, store and utilize because of the increase in the bulk density. The operational conditions required to produce high quality rice straw pellets have not been determined. This study determined the optimal moisture content range required to produce rice straw pellets with high yield ratio and high heating value, and also determined the influence of particle size and the forming temperature on the yield ratio and durability of rice straw pellets. The optimal moisture content range was between 13% and 20% under a forming temperature of 60 or 80 °C. The optimal particle size was between 10 and 20 mm, considering the time and energy required for shredding, although the particle size did not significantly affect the yield ratio and durability of the pellets. The optimized conditions provided high quality rice straw pellets with nearly 90% yield ratio, ⩾12 MJ/kg for the lower heating value, and >95% durability

  4. Activity size distributions for long-lived radon decay products in aerosols collected in Barcelona (Spain)

    International Nuclear Information System (INIS)

    Camacho, A.; Valles, I.; Vargas, A.; Gonzalez-Perosanz, M.; Ortega, X.

    2009-01-01

    The activity median aerodynamic diameters (AMADs) of long-lived radon decay product ( 210 Pb, 210 Po) in aerosols collected in the Barcelona area (Northeast Spain) during the period from April 2006 to February 2008 are presented. The 210 Po mean AMAD was 420 nm, while the 210 Pb mean AMAD was 500 nm. The temporal evolution of 210 Pb and 210 Po AMADs shows maxima in autumn and winter and minima in spring and summer. 210 Pb AMAD are being used to estimate the mean-residence time of atmospheric aerosols.

  5. Beer Clarification by Novel Ceramic Hollow-Fiber Membranes: Effect of Pore Size on Product Quality.

    Science.gov (United States)

    Cimini, Alessio; Moresi, Mauro

    2016-10-01

    In this work, the crossflow microfiltration performance of rough beer samples was assessed using ceramic hollow-fiber (HF) membrane modules with a nominal pore size ranging from 0.2 to 1.4 μm. Under constant operating conditions (that is, transmembrane pressure difference, TMP = 2.35 bar; feed superficial velocity, v S = 2.5 m/s; temperature, T = 10 °C), quite small steady-state permeation fluxes (J * ) of 32 or 37 L/m 2 /h were achieved using the 0.2- or 0.5-μm symmetric membrane modules. Both permeates exhibited turbidity beer quality parameters. Moreover, it exhibited J * values of the same order of magnitude of those claimed for the polyethersulfone HF membrane modules currently commercialized. The 1.4-μm asymmetric membrane module yielded quite a high steady-state permeation flux (196 ± 38 L/m 2 /h), and a minimum decline in permeate quality parameters, except for the high levels of turbidity at room temperature and chill haze. In the circumstances, such a membrane module might be regarded as a real valid alternative to conventional powder filters on condition that the resulting permeate were submitted to a final finishing step using 0.45- or 0.65-μm microbially rated membrane cartridges prior to aseptic bottling. A novel combined beer clarification process was thus outlined. © 2016 Institute of Food Technologists®.

  6. Feasibility of using a dose-area product ratio as beam quality specifier for photon beams with small field sizes.

    Science.gov (United States)

    Pimpinella, Maria; Caporali, Claudio; Guerra, Antonio Stefano; Silvi, Luca; De Coste, Vanessa; Petrucci, Assunta; Delaunay, Frank; Dufreneix, Stéphane; Gouriou, Jean; Ostrowsky, Aimé; Rapp, Benjamin; Bordy, Jean-Marc; Daures, Josiane; Le Roy, Maïwenn; Sommier, Line; Vermesse, Didier

    2018-01-01

    To investigate the feasibility of using the ratio of dose-area product at 20 cm and 10 cm water depths (DAPR 20,10 ) as a beam quality specifier for radiotherapy photon beams with field diameter below 2 cm. Dose-area product was determined as the integral of absorbed dose to water (D w ) over a surface larger than the beam size. 6 MV and 10 MV photon beams with field diameters from 0.75 cm to 2 cm were considered. Monte Carlo (MC) simulations were performed to calculate energy-dependent dosimetric parameters and to study the DAPR 20,10 properties. Aspects relevant to DAPR 20,10 measurement were explored using large-area plane-parallel ionization chambers with different diameters. DAPR 20,10 was nearly independent of field size in line with the small differences among the corresponding mean beam energies. Both MC and experimental results showed a dependence of DAPR 20,10 on the measurement setup and the surface over which D w is integrated. For a given setup, DAPR 20,10 values obtained using ionization chambers with different air-cavity diameters agreed with one another within 0.4%, after the application of MC correction factors accounting for effects due to the chamber size. DAPR 20,10 differences among the small field sizes were within 1% and sensitivity to the beam energy resulted similar to that of established beam quality specifiers based on the point measurement of D w . For a specific measurement setup and integration area, DAPR 20,10 proved suitable to specify the beam quality of small photon beams for the selection of energy-dependent dosimetric parameters. Copyright © 2017 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  7. 7 CFR 51.1903 - Size classification.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Size classification. 51.1903 Section 51.1903... STANDARDS) United States Consumer Standards for Fresh Tomatoes Size and Maturity Classification § 51.1903 Size classification. The following terms may be used for describing the size of the tomatoes in any lot...

  8. Founding weaver ant queens (Oecophylla longinoda) increase production and nanitic worker size when adopting non-nestmate pupae.

    Science.gov (United States)

    Ouagoussounon, Issa; Offenberg, Joachim; Sinzogan, Antonio; Adandonon, Appolinaire; Kossou, Dansou; Vayssières, Jean-François

    2015-01-01

    Weaver ants (Oecophylla longinoda Latreille) are used commercially to control pest insects and for protein production. In this respect fast colony growth is desirable for managed colonies. Transplantation of non-nestmate pupae to incipient colonies has been shown to boost colony growth. Our objectives were to find the maximum number of pupae a founding queen can handle, and to measure the associated colony growth. Secondly, we tested if transplantation of pupae led to production of larger nanitic workers (defined as unusually small worker ants produced by founding queens in their first batch of offspring). Forty-five fertilized queens were divided into three treatments: 0 (control), 100 or 300 non-nestmate pupae transplanted to each colony. Pupae transplantation resulted in highly increased growth rates, as pupae were readily adopted by the queens and showed high proportions of surviving (mean = 76%). However, survival was significantly higher when 100 pupae were transplanted compared to transplantation of 300 pupae, indicating that queens were unable to handle 300 pupae adequately and that pupae require some amount of nursing. Nevertheless, within the 60-day experiment the transplantation of 300 pupae increased total colony size more than 10-fold whereas 100 pupae increased the size 5.6 fold, compared to control. This increase was due not only to the individuals added in the form of pupae but also to an increased per capita brood production by the resident queen, triggered by the adopted pupae. The size of hatching pupae produced by the resident queen also increased with the number of pupae transplanted, leading to larger nanitic workers in colonies adopting pupae. In conclusion, pupae transplantation may be used to produce larger colonies with larger worker ants and may thus reduce the time to produce weaver ant colonies for commercial purposes. This in turn may facilitate the implementation of the use of weaver ants.

  9. Comparison of heuristics for an economic lot scheduling problem with deliberated coproduction

    Directory of Open Access Journals (Sweden)

    Pilar I. Vidal-Carreras

    2009-12-01

    Full Text Available We built on the Economic Lot Scheduling Problem Scheduling (ELSP literature by making some modifications in order to introduce new constraints which had not been thoroughly studied with a view to simulating specific real situations. Specifically, our aim is to propose and simulate different scheduling policies for a new ELSP variant: Deliberated Coproduction. This problem comprises a product system in an ELSP environment in which we may choose if more than one product can be produced on the machine at a given time. We expressly consider the option of coproducing two products whose demand is not substitutable. In order to draw conclusions, a simulation model and its results were developed in the article by employing modified Bomberger data which include two items that could be produced simultaneously.

  10. Population ecology of the mallard: II. Breeding habitat conditions, size of the breeding populations, and production indices

    Science.gov (United States)

    Pospahala, Richard S.; Anderson, David R.; Henny, Charles J.

    1974-01-01

    This report, the second in a series on a comprehensive analysis of mallard population data, provides information on mallard breeding habitat, the size and distribution of breeding populations, and indices to production. The information in this report is primarily the result of large-scale aerial surveys conducted during May and July, 1955-73. The history of the conflict in resource utilization between agriculturalists and wildlife conservation interests in the primary waterfowl breeding grounds is reviewed. The numbers of ponds present during the breeding season and the midsummer period and the effects of precipitation and temperature on the number of ponds present are analyzed in detail. No significant cycles in precipitation were detected and it appears that precipitation is primarily influenced by substantial seasonal and random components. Annual estimates (1955-73) of the number of mallards in surveyed and unsurveyed breeding areas provided estimates of the size and geographic distribution of breeding mallards in North America. The estimated size of the mallard breeding population in North America has ranged from a high of 14.4 million in 1958 to a low of 7.1 million in 1965. Generally, the mallard breeding population began to decline after the 1958 peak until 1962, and remained below 10 million birds until 1970. The decline and subsequent low level of the mallard population between 1959 and 1969 .generally coincided with a period of poor habitat conditions on the major breeding grounds. The density of mallards was highest in the Prairie-Parkland Area with an average of nearly 19.2 birds per square mile. The proportion of the continental mallard breeding population in the Prairie-Parkland Area ranged from 30% in 1962 to a high of 600/0 in 1956. The geographic distribution of breeding mallards throughout North America was significantly related to the number of May ponds in the Prairie-Parkland Area. Estimates of midsummer habitat conditions and indices to

  11. Linking size and age at sexual maturation to body growth, productivity and recruitment of Atlantic cod stocks spanning the North Atlantic

    DEFF Research Database (Denmark)

    Köster, Fritz; Trippel, E.A.; Tomkiewicz, Jonna

    2013-01-01

    Sexual maturation patterns of 22 North Atlantic stocks of cod (Gadus morhua) were examined and related to geographical distribution area, ambient water temperature, growth and surplus production. Four patterns were identified, i.e. sexual maturation early in life at small size, early in life...... Atlantic stocks. This comparative analysis suggests that maturation patterns relate to growth potential and surplus production whereas annual production of recruits per unit biomass appears unrelated to average size at sexual maturation...

  12. Limiting Size of Fish Fillets at the Center of the Plate Improves the Sustainability of Aquaculture Production

    Directory of Open Access Journals (Sweden)

    Stephen F. Cross

    2011-07-01

    Full Text Available North American dining customers like to have a singular large piece of protein in the center of the plate. When fish is the protein of choice, the portion size from many species is limited by the overall size of the fish. Therefore, for these species, the means to achieve a singular larger portion of “center of the plate” protein is to grow a larger animal. However, fish become less efficient in converting feed to protein as they age. A second option would be to provide two smaller fillets originating from younger, more efficient fish. Here, the sustainability ramifications of these two protein provisioning strategies (single large or two small fillets are considered for three species of fish produced in aquaculture. Growth data for channel catfish (Ictalurus punctatus produced in ponds, rainbow trout (Oncorhynchus mykiss in raceways, and sablefish (Anoplopoma fimbria in marine net pens, were modeled to assess the total biomass and overall food conversion ratio for the production of small, medium or large fish. The production of small fish added an additional 50% or more biomass per year for trout, catfish, and sablefish compared to the production of large fish. Feed conversion ratios were also improved by nearly 10% for the smaller compared to larger fish of each species. Thus, even though all of these species tend to be considered aquaculture species of low environmental impact (and hence “green” or sustainable options, the product form requested by retailers and served by chefs can further increase the sustainability of these species.

  13. Choice of optimum size of installations for dual-purpose production of desalted water and electricity, using nuclear power

    International Nuclear Information System (INIS)

    Gaussens, J.

    1966-01-01

    The author used a method starting with water and power demand curves; this leads to the rational allocation of production costs to water and power within a given market. The power demand curve is needed as it seems improbable to sell at a constant price the enormous quantity of electricity produced by a dual purpose plant. Criteria based on principles of classical economics, help to select objectively desalination methods and plant sizes. On these criteria, normative methods for tariffing action of water and power can be based, while adhering as closely as possible to structure of demand. Examples of such criteria are the maximum profit of the supplier or the maximum satisfaction of the consumers taken collectively. In the first case marginal costs must be equated to marginal revenue, in the second one marginal cost to marginal satisfaction (theory of surpluses). The plant size often determines the choice of desalination process. Therefore the shape of the water demand curve and the economic criterion adopted (public or private ownership, capital restrictions etc.) often determine in this way both size and type of plant. Before deciding on the desalination technique, market surveys and rather subtle economic analyses are therefore necessary. (author) [fr

  14. Response of a tropical tree to non-timber forest products harvest and reduction in habitat size

    Science.gov (United States)

    Kouagou, M’Mouyohoun; Natta, Armand K.; Gado, Choukouratou

    2017-01-01

    Non-timber forest products (NTFPs) are widely harvested by local people for their livelihood. Harvest often takes place in human disturbed ecosystems. However, our understanding of NTFPs harvesting impacts in fragmented habitats is limited. We assessed the impacts of fruit harvest, and reduction in habitat size on the population structures of Pentadesma butyracea Sabine (Clusiaceae) across two contrasting ecological regions (dry vs. moist) in Benin. In each region, we selected three populations for each of the three fruit harvesting intensities (low, medium and high). Harvesting intensities were estimated as the proportion of fruits harvested per population. Pentadesma butyracea is found in gallery forests along rivers and streams. We used the width of gallery forests as a measure of habitat size. We found negative effects of fruit harvest on seedling and adult density but no significant effect on population size class distribution in both ecological regions. The lack of significant effect of fruit harvest on population structure may be explained by the ability of P. butyracea to compensate for the negative effect of fruit harvesting by increasing clonal reproduction. Our results suggest that using tree density and population structure to assess the ecological impacts of harvesting clonal plants should be done with caution. PMID:28850624

  15. Response of a tropical tree to non-timber forest products harvest and reduction in habitat size.

    Directory of Open Access Journals (Sweden)

    Orou G Gaoue

    Full Text Available Non-timber forest products (NTFPs are widely harvested by local people for their livelihood. Harvest often takes place in human disturbed ecosystems. However, our understanding of NTFPs harvesting impacts in fragmented habitats is limited. We assessed the impacts of fruit harvest, and reduction in habitat size on the population structures of Pentadesma butyracea Sabine (Clusiaceae across two contrasting ecological regions (dry vs. moist in Benin. In each region, we selected three populations for each of the three fruit harvesting intensities (low, medium and high. Harvesting intensities were estimated as the proportion of fruits harvested per population. Pentadesma butyracea is found in gallery forests along rivers and streams. We used the width of gallery forests as a measure of habitat size. We found negative effects of fruit harvest on seedling and adult density but no significant effect on population size class distribution in both ecological regions. The lack of significant effect of fruit harvest on population structure may be explained by the ability of P. butyracea to compensate for the negative effect of fruit harvesting by increasing clonal reproduction. Our results suggest that using tree density and population structure to assess the ecological impacts of harvesting clonal plants should be done with caution.

  16. Size dependence in non-sperm ejaculate production is reflected in daily energy expenditure and resting metabolic rate.

    Science.gov (United States)

    Friesen, Christopher R; Powers, Donald R; Copenhaver, Paige E; Mason, Robert T

    2015-05-01

    The non-sperm components of an ejaculate, such as copulatory plugs, can be essential to male reproductive success. But the costs of these ejaculate components are often considered trivial. In polyandrous species, males are predicted to increase energy allocation to the production of non-sperm components, but this allocation is often condition dependent and the energetic costs of their production have never been quantified. Red-sided garter snakes (Thamnophis sirtalis parietalis) are an excellent model with which to quantify the energetic costs of non-sperm components of the ejaculate as they exhibit a dissociated reproductive pattern in which sperm production is temporally disjunct from copulatory plug production, mating and plug deposition. We estimated the daily energy expenditure and resting metabolic rate of males after courtship and mating, and used bomb calorimetry to estimate the energy content of copulatory plugs. We found that both daily energy expenditure and resting metabolic rate were significantly higher in small mating males than in courting males, and a single copulatory plug without sperm constitutes 5-18% of daily energy expenditure. To our knowledge, this is the first study to quantify the energetic expense of size-dependent ejaculate strategies in any species. © 2015. Published by The Company of Biologists Ltd.

  17. Particle size variations of activated carbon on biofilm formation in thermophilic biohydrogen production from palm oil mill effluent

    International Nuclear Information System (INIS)

    Jamali, Nur Syakina; Jahim, Jamaliah Md; Isahak, Wan Nor Roslam Wan; Abdul, Peer Mohamed

    2017-01-01

    Highlights: • Biofilm was developed on GAC by self-attachment immobilisation. • Effect of various micropore size of GAC was evaluated in H_2 production. • Capability of attached-biofilm to degrade cellulosic fibre in POME was evaluated. • Microbial community colonized on GAC was characterised. - Abstract: In this study, we examined the formation of thermophilic microbial biofilm by self-attachment on microbial carrier of granular activated carbon (GAC) in five different micro-pore volumes 0.31, 0.41, 0.44, 0.48, and 0.50 cm"3/g. It was found that the highest hydrogen production rate of 100.8 ± 3.7 mmol H_2/l.d and yield of 1.01 ± 0.07 mol H_2/mol sugar were obtained at 0.44 cm"3/g volume size of GAC. The cellulolytic activity of attached-biofilm was further investigated using POME as a feedstock. The results showed that in all diluted POME substrate, the total sugar consumed by the microbes was found higher than that the amount of soluble monomeric sugar present in the POME medium. It is believe that the microbial biofilm was able to hydrolyse polymeric sugar of cellulosic fibre in the POME by performing enzymatic hydrolysis into simple monomeric sugar. The isolated biofilm bacteria that subjected to 16S rRNA gene analysis presented 99% high homology to the species of Thermoanaerobacterium thermosaccharolyticum which were guaranteed to perform a cellulosic degradation activity.

  18. Prospects for the domestic production of large-sized cast blades and vanes for industrial gas turbines

    Science.gov (United States)

    Kazanskiy, D. A.; Grin, E. A.; Klimov, A. N.; Berestevich, A. I.

    2017-10-01

    Russian experience in the production of large-sized cast blades and vanes for industrial gas turbines is analyzed for the past decades. It is noted that the production of small- and medium-sized blades and vanes made of Russian alloys using technologies for aviation, marine, and gas-pumping turbines cannot be scaled for industrial gas turbines. It is shown that, in order to provide manufacturability under large-scale casting from domestic nickel alloys, it is necessary to solve complex problems in changing their chemical composition, to develop new casting technologies and to optimize the heat treatment modes. An experience of PAO NPO Saturn in manufacturing the blades and vanes made of ChS88U-VI and IN738-LC foundry nickel alloys for the turbines of the GTE-110 gas turbine unit is considered in detail. Potentialities for achieving adopted target parameters for the mechanical properties of working blades cast from ChS88UM-VI modified alloy are established. For the blades made of IN738-LC alloy manufactured using the existing foundry technology, a complete compliance with the requirements of normative and technical documentation has been established. Currently, in Russia, the basis of the fleet of gas turbine plants is composed by foreign turbines, and, for the implementation of the import substitution program, one can use the positive experience of PAO NPO Saturn in casting blades from IN738-LC alloy based on a reverse engineering technique. A preliminary complex of studies of the original manufacturer's blades should be carried out, involving, first of all, the determination of geometric size using modern measurement methods as well as the studies on the chemical compositions of the used materials (base metal and protective coatings). Further, verifying the constructed calculation models based on the obtained data, one could choose available domestic materials that would meet the operating conditions of the blades according to their heat resistance and corrosion

  19. Heritage plaza parking lots improvement project- Solar PV installation

    Energy Technology Data Exchange (ETDEWEB)

    Hooks, Todd [Agua Caliente Indian Reservation, Palm Springs, CA (United States)

    2017-03-31

    The Agua Caliente Band of Cahuilla Indians (ACBCI or the “Tribe”) installed a 79.95 kW solar photovoltaic (PV) system to offset the energy usage costs of the Tribal Education and Family Services offices located at the Tribe's Heritage Plaza office building, 90I Tahquitz Way, Palm Springs, CA, 92262 (the "Project"). The installation of the Solar PV system was part of the larger Heritage Plaza Parking Lot Improvements Project and mounted on the two southern carport shade structures. The solar PV system will offset 99% of the approximately 115,000 kWh in electricity delivered annually by Southern California Edison (SCE) to the Tribal Education and Family Services offices at Heritage Plaza, reducing their annual energy costs from approximately $22,000 annually to approximately $200. The total cost of the proposed solar PV system is $240,000.

  20. 21 CFR 203.38 - Sample lot or control numbers; labeling of sample units.

    Science.gov (United States)

    2010-04-01

    ... numbers; labeling of sample units. (a) Lot or control number required on drug sample labeling and sample... identifying lot or control number that will permit the tracking of the distribution of each drug sample unit... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Sample lot or control numbers; labeling of sample...

  1. Water in the Balance: A Parking Lot Story

    Science.gov (United States)

    Haas, N. A.; Vitousek, S.

    2017-12-01

    The greater Chicagoland region has seen a high degree of urbanization since 1970. For example, between 1970-1990 the region experienced 4% population growth, a 35% increase in urban land use, and approximately 454 square miles of agricultural land was mostly converted into urban uses. Transformation of land into urban uses in the Chicagoland region has altered the stream and catchment response to rainfall events, specifically an increase in stream flashiness and increase in urban flooding. Chicago has begun to address these changes through green infrastructure. To understand the impact of green infrastructure at local, city-wide, and watershed scales, individual projects need to be accurately and sufficiently modeled. A traditional parking lot conversion into a porous parking lot at the University of Illinois at Chicago was modeled using SWMM and scrutinized using field data to look at stormwater runoff and water balance prior and post reconstruction. SWMM modeling suggested an 87% reduction in peak flow as well as a 100% reduction in flooding for a 24 hour, 1.72-inch storm. For the same storm, field data suggest an 89% reduction in peak flow as well as a 100% reduction in flooding. Modeling suggested 100% reductions in flooding for longer duration storms (24 hour+) and a smaller reduction in peak flow ( 66%). The highly parameterized SWMM model agrees well with collected data and analysis. Further effort is being made to use data mining to create correlations within the collected datasets that can be integrated into a model that follows a standardized formation process and reduces parameterization.

  2. Detection and genetic identification of pestiviruses in Brazilian lots of fetal bovine serum collected from 2006 to 2014

    Directory of Open Access Journals (Sweden)

    Francielle L. Monteiro

    Full Text Available ABSTRACT: The present study performed a genetic identification of pestiviruses contaminating batches of fetal bovine serum (FBS produced in Brazil from 2006 to 2014. Seventy-three FBS lots were screened by a RT-PCR targeting the 5’untranslated region (UTR of the pestivirus genome. Thirty-nine lots (53.4% were positive for pestivirus RNA and one contained infectious virus. Nucleotide sequencing and phylogenetic analysis of the 5’UTR revealed 34 lots (46.6% containing RNA of bovine viral diarrhea virus type 1 (BVDV-1, being 23 BVDV-1a (5’ UTR identity 90.8-98.7%, eight BVDV-1b (93.9-96.7% and three BVDV-1d (96.2- 97.6%. Six lots (8.2% contained BVDV-2 (90.3-100% UTR identity being two BVDV-2a; three BVDV-2b and one undetermined. Four FBS batches (5.5% were found contaminated with HoBi-like virus (98.3 to 100%. Five batches (6.8% contained more than one pestivirus. The high frequency of contamination of FBS with pestivirus RNA reinforce the need for systematic and updated guidelines for monitoring this product to reduce the risk of contamination of biologicals and introduction of contaminating agents into free areas.

  3. Production Planning with Respect to Uncertainties. Simulator Based Production Planning of Average Sized Combined Heat and Power Production Plants; Produktionsplanering under osaekerhet. Simulatorbaserad produktionsplanering av medelstora kraftvaermeanlaeggningar

    Energy Technology Data Exchange (ETDEWEB)

    Haeggstaahl, Daniel [Maelardalen Univ., Vaesteraas (Sweden); Dotzauer, Erik [AB Fortum, Stockholm (Sweden)

    2004-12-01

    Production planning in Combined Heat and Power (CHP) systems is considered. The focus is on development and use of mathematical models and methods. Different aspects on production planning are discussed, including weather and load predictions. Questions relevant on the different planning horizons are illuminated. The main purpose with short-term (one week) planning is to decide when to start and stop the production units, and to decide how to use the heat storage. The main conclusion from the outline of pros and cons of commercial planning software are that several are using Mixed Integer Programming (MIP). In that sense they are similar. Building a production planning model means that the planning problem is formulated as a mathematical optimization problem. The accuracy of the input data determines the practical detail level of the model. Two alternatives to the methods used in today's commercial programs are proposed: stochastic optimization and simulator-based optimization. The basic concepts of mathematical optimization are outlined. A simulator-based model for short-term planning is developed. The purpose is to minimize the production costs, depending on the heat demand in the district heating system, prices of electricity and fuels, emission taxes and fees, etc. The problem is simplified by not including any time-linking conditions. The process model is developed in IPSEpro, a heat and mass-balance software from SimTech Simulation Technology. TOMLAB, an optimization toolbox in MATLAB, is used as optimizer. Three different solvers are applied: glcFast, glcCluster and SNOPT. The link between TOMLAB and IPSEpro is accomplished using the Microsoft COM technology. MATLAB is the automation client and contains the control of IPSEpro and TOMLAB. The simulator-based model is applied to the CHP plant in Eskilstuna. Two days are chosen and analyzed. The optimized production is compared to the measured. A sensitivity analysis on how variations in outdoor

  4. Trypanosoma brucei gambiense trypanosomiasis in Terego county, northern Uganda, 1996: a lot quality assurance sampling survey.

    Science.gov (United States)

    Hutin, Yvan J F; Legros, Dominique; Owini, Vincent; Brown, Vincent; Lee, Evan; Mbulamberi, Dawson; Paquet, Christophe

    2004-04-01

    We estimated the pre-intervention prevalence of Trypanosoma brucei gambiense (Tbg) trypanosomiasis using the lot quality assurance sampling (LQAS) methods in 14 parishes of Terego County in northern Uganda. A total of 826 participants were included in the survey sample in 1996. The prevalence of laboratory confirmed Tbg trypanosomiasis adjusted for parish population sizes was 2.2% (95% confidence interval =1.1-3.2). This estimate was consistent with the 1.1% period prevalence calculated on the basis of cases identified through passive and active screening in 1996-1999. Ranking of parishes in four categories according to LQAS analysis of the 1996 survey predicted the prevalences observed during the first round of active screening in the population in 1997-1998 (P LQAS were validated by the results of the population screening, suggesting that these survey methods may be useful in the pre-intervention phase of sleeping sickness control programs.

  5. Influence of wind farm capacity, turbine size and wind speed on production cost: analysis of the actual market trend

    International Nuclear Information System (INIS)

    Laali, A.-R.; Meyer, J.-L.

    1996-01-01

    Several studies are undertaken in R and D Division of EDF in collaboration with ERASME association in order to have a good knowledge of the wind energy production costs. These studies are performed in the framework of a wind energy monitoring project and concern the influence of a few parameters like wind farm capacity, turbine size and wind speed on production costs, through an analysis of the actual market trend. Some 50 manufacturers and 140 different kind of wind turbines are considered for this study. The minimum production cost is situated at 800/900 kW wind turbine rated power. This point will probably move to more important powers in the future. This study is valid only for average conditions and some special parameters like particular climate conditions or lack of infrastructure for a special site that could modify the results shown on the curves. The variety of wind turbines (rated power as a function of rotor diameter, height and specific rated power) in the actual market is analysed. A brief analysis of the market trend is also performed. (author)

  6. Gasification-based energy production systems for different size classes - Potential and state of R and D

    International Nuclear Information System (INIS)

    Kurkela, E.

    1997-01-01

    (Conference paper). Different energy production systems based on biomass and waste gasification are being developed in Finland. In 1986-1995 the Finnish gasification research and development activities were almost fully devoted to the development of simplified IGCC power systems suitable to large-scale power production based on pressurized fluid-bed gasification, hot gas cleaning and a combined-cycle process. In the 1990's the atmospheric-pressure gasification activities aiming for small and medium size plants were restarted in Finland. Atmospheric-pressure fixed-bed gasification of wood and peat was commercialized for small-scale district heating applications already in the 1980's. Today research and development in this field aims at developing a combined heat and power plant based on the use of cleaned product gas in internal combustion engines. Another objective is to enlarge the feedstock basis of fixed-bed gasifiers, which at present are limited to the use of piece-shaped fuels such as sod peat and wood chips. Intensive research and development is at present in progress in atmospheric-pressure circulating fluidized-bed gasification of biomass residues and wastes. This gasification technology, earlier commercialized for lime-kiln applications, will lead to co-utilization of local residues and wastes in existing pulverized coal fired boilers. The first demonstration plant is under construction in Finland and there are several projects under planning or design phase in different parts of Europe. 48 refs., 1 fig., 1 tab

  7. Size-Controlled Production of Gold Bionanoparticles Using the Extremely Acidophilic Fe(III-Reducing Bacterium, Acidocella aromatica

    Directory of Open Access Journals (Sweden)

    Intan Nurul Rizki

    2018-02-01

    Full Text Available Recycling of gold-bearing “urban mine” resources, such as waste printed circuit boards (PCBs, is attracting an increasing interest. Some of the gold leaching techniques utilize acidic lixiviants and in order to eventually target such acidic leachates, the utility of the acidophilic Fe(III-reducing heterotrophic bacterium, Acidocella (Ac. aromatica PFBC was evaluated for production of Au(0 bionanoparticles (bio-AuNPs. Au(III ions (as AuCl4−, initially 10 mg/L, were readily adsorbed onto the slightly-positively charged Ac. aromatica cell surface and transported into cytoplasm to successfully form intracellular bio-AuNPs in a simple one-step microbiological reaction. Generally, increasing the initial concentration of formate as e-donor corresponded to faster Au(III bioreduction and a greater number of Au(0 nucleation sites with less crystal growth within 40–60 h: i.e., use of 1, 5, 10, or 20 mM formate led to production of bio-AuNPs of 48, 24, 13, or 12 nm in mean particle size with 2.3, 17, 62, and 97 particles/cell, respectively. Addition of Cu2+ as an enzymatic inhibitor significantly decreased the number of Au(0 nucleation sites but enhanced crystal growth of individual particles. As a result, the manipulation of the e-donor concentration combined with an enzyme inhibitor enabled the 3-grade size-control of bio-AuNPs (nearly within a normal distribution at 48, 26 or 13 nm by use of 1 mM formate, 20 mM formate (+Cu2+ or 10 mM formate, respectively, from highly acidic, dilute Au(III solutions.

  8. Bioethanol Production by Calcium Alginate-Immobilised St1 Yeast System: Effects of Size of Beads, Ratio and Concentration

    Directory of Open Access Journals (Sweden)

    Masniroszaime Md Zain

    2011-12-01

    Full Text Available Immobilized yeast-cell technology posses several advantages in bioethanol production due to its potential to increase the ethanol yield by eliminating unit process used. Thus, process expenses in cell recovery and reutilization can be minimised. The aim of this study is to investigate the influence of three parameters (substrate concentrations, size of alginate beads and ratio of volume of beads to volume of medium on local isolated yeast (ST1 which immobilized using calcium alginate fermentation system. The most affected ethanol production by calcium alginate-immobilised ST1 yeast system were ratio of volume of the beads to the volume of substrate and concentration of LBS. Highest theoretical yield, 78% was obtained in ST1-alginate beads with the size of beads 0.5cm, ratio volume of beads to the volume of LBS media 0.4 and 150g/l concentration of LBS.ABSTRAK: Teknologi sel yis pegun memiliki beberapa kelebihan dalam penghasilan bioetanol kerana ia berpotensi meningkatkan pengeluaran etanol dengan menyingkirkan unit proses yang digunakan. Maka, proses pembiayaan dalam perolehan sel dan penggunaan semula boleh dikurangkan. Tujuan kajian ini adalah untuk mengkaji pengaruh tiga parameter (kepekatan substrat, saiz manik alginat dan nisbah isipadu manik terhadap isipadu bahantara ke atas sel tempatan terasing (local isolated yeast (ST1 yang dipegun menggunakan sistem penapaian kalsium alginat. Penghasilan etanol yang paling berkesan dengan menggunakan sistem yis ST1 kalsium alginat-pegun adalah dengan kadar nisbah isipadu manik terhadap isipadu substrat dan kepekatan LBS. Kadar hasil teori tertinggi iaitu 78% didapati menerusi manik alginat-ST1 dengan saiz manik 0.5cm, nisbah isipadu 0.4 terhadap perantara LBS dan kepekatan LBS sebanyak 150g/l. Normal 0 false false false EN-US X-NONE X-NONE

  9. A Tale of Two Tails : Establishment Size and Labour Productivity in United States and German Manufacturing at the Start of the Twentieth Century

    NARCIS (Netherlands)

    Veenstra, Joost; de Jong, Herman

    This paper studies the importance of establishment size for the German/US labour-productivity gap in manufacturing at the start of the twentieth century. First, we show that the left tail of the employment distribution by establishment size was larger in Germany than in the USA. Second, using US

  10. Does body size of dairy cows, at constant ratio of maintenance to production requirements, affect productivity in a pasture-based production system?

    Science.gov (United States)

    Hofstetter, P; Steiger Burgos, M; Petermann, R; Münger, A; Blum, J W; Thomet, P; Menzi, H; Kohler, S; Kunz, P

    2011-12-01

    This study compared productivity of dairy cows with different body weight (BW), but a constant ratio of maintenance to production requirements in their first lactation, in a pasture-based production system with spring calving. Two herds, Herd L (13 and 14 large cows in 2003 and 2004 respectively; average BW after calving, 721 kg) and Herd S (16 small cows in both years; 606 kg) [Correction added after online publication 14 January 2011: 16 small cows in both years; 621 kg was changed to 16 small cows in both years; 606 kg], all in their second or following lactations, were each allocated 6 ha of pasture and rotationally grazed on 10 parallel paddocks with equal herbage offer and nutritional values. Winter hay, harvested from the same pastures, was offered ad libitum in the indoor periods in a tied stall barn. Each herd received, per lactation and year, approximately 2000 kg dry matter (DM) of concentrates and of fodder beets, equally distributed to every individual. Indoors, the L-cows ingested more DM than the S-cows (18.7 vs. 16.3 kg DM/cow per day; p pasture (17.9 vs. 15.5 kg DM/cow per day; p dairy cow types were equally efficient in utilising pasture-based forage. © 2010 Blackwell Verlag GmbH.

  11. Sustainable Sizing.

    Science.gov (United States)

    Robinette, Kathleen M; Veitch, Daisy

    2016-08-01

    To provide a review of sustainable sizing practices that reduce waste, increase sales, and simultaneously produce safer, better fitting, accommodating products. Sustainable sizing involves a set of methods good for both the environment (sustainable environment) and business (sustainable business). Sustainable sizing methods reduce (1) materials used, (2) the number of sizes or adjustments, and (3) the amount of product unsold or marked down for sale. This reduces waste and cost. The methods can also increase sales by fitting more people in the target market and produce happier, loyal customers with better fitting products. This is a mini-review of methods that result in more sustainable sizing practices. It also reviews and contrasts current statistical and modeling practices that lead to poor fit and sizing. Fit-mapping and the use of cases are two excellent methods suited for creating sustainable sizing, when real people (vs. virtual people) are used. These methods are described and reviewed. Evidence presented supports the view that virtual fitting with simulated people and products is not yet effective. Fit-mapping and cases with real people and actual products result in good design and products that are fit for person, fit for purpose, with good accommodation and comfortable, optimized sizing. While virtual models have been shown to be ineffective for predicting or representing fit, there is an opportunity to improve them by adding fit-mapping data to the models. This will require saving fit data, product data, anthropometry, and demographics in a standardized manner. For this success to extend to the wider design community, the development of a standardized method of data collection for fit-mapping with a globally shared fit-map database is needed. It will enable the world community to build knowledge of fit and accommodation and generate effective virtual fitting for the future. A standardized method of data collection that tests products' fit methodically

  12. Energy and system size dependence of phi meson production in Cu+Cu and Au+Au collisions

    Energy Technology Data Exchange (ETDEWEB)

    STAR Coll

    2008-10-28

    We study the beam-energy and system-size dependence of {phi} meson production (using the hadronic decay mode {phi} {yields} K{sup +}K{sup -}) by comparing the new results from Cu + Cu collisions and previously reported Au + Au collisions at {radical}s{sub NN} = 62.4 and 200 GeV measured in the STAR experiment at RHIC. Data presented are from midrapidity (|y| < 0.5) for 0.4 < p{sub T} < 5 GeV/c. At a given beam energy, the transverse momentum distributions for {phi} mesons are observed to be similar in yield and shape for Cu + Cu and Au + Au colliding systems with similar average numbers of participating nucleons. The {phi} meson yields in nucleus-nucleus collisions, normalized by the average number of participating nucleons, are found to be enhanced relative to those from p + p collisions with a different trend compared to strange baryons. The enhancement for {phi} mesons is observed to be higher at {radical}s{sub NN} = 200 GeV compared to 62.4 GeV. These observations for the produced {phi}(s{bar s}) mesons clearly suggest that, at these collision energies, the source of enhancement of strange hadrons is related to the formation of a dense partonic medium in high energy nucleus-nucleus collisions and cannot be alone due to canonical suppression of their production in smaller systems.

  13. Balancing Urban Biodiversity Needs and Resident Preferences for Vacant Lot Management

    Directory of Open Access Journals (Sweden)

    Christine C. Rega-Brodsky

    2018-05-01

    Full Text Available Urban vacant lots are often a contentious feature in cities, seen as overgrown, messy eyesores that plague neighborhoods. We propose a shift in this perception to locations of urban potential, because vacant lots may serve as informal greenspaces that maximize urban biodiversity while satisfying residents’ preferences for their design and use. Our goal was to assess what kind of vacant lots are ecologically valuable by assessing their biotic contents and residents’ preferences within a variety of settings. We surveyed 150 vacant lots throughout Baltimore, Maryland for their plant and bird communities, classified the lot’s setting within the urban matrix, and surveyed residents. Remnant vacant lots had greater vegetative structure and bird species richness as compared to other lot origins, while vacant lot settings had limited effects on their contents. Residents preferred well-maintained lots with more trees and less artificial cover, support of which may increase local biodiversity in vacant lots. Collectively, we propose that vacant lots with a mixture of remnant and planted vegetation can act as sustainable urban greenspaces with the potential for some locations to enhance urban tree cover and bird habitat, while balancing the needs and preferences of city residents.

  14. Lots of Small Stars Born in Starburst Region

    Science.gov (United States)

    1999-10-01

    at 2.166 µm. Images of the NGC 3603 region were obtained in three near-IR filter bands (J s , H and K s ) with the ISAAC instrument at the ANTU telescope. The observations were made in "service" mode on April 4 - 6 and 9, 1999, during selected periods when the (optical) seeing was equal to or better than 0.4 arcsec. This was a most essential requirement in order to achieve sufficient angular resolution (image sharpness) that would allow to do accurate photometric measurements of individual stars in this crowded cluster . This particular observing mode, during which ESO observers at ANTU kept careful track of the actual atmospheric conditions, contributed greatly to securing the very high quality images needed for this programme. In view of the many comparatively bright stars in the field, the observing strategy was to use the shortest possible exposure time (1.77 sec) to keep the number of over-exposed (saturated) stellar images to a minimum. As the minimum time required to stabilize the telescope's active optics control system and guarantee the optimum optical quality was about 1 min, thirty-four short exposures were made at each sky position and then co-added to an effective one-minute exposure. After each such series, the telescope pointing was offset in a random pattern up to 20 arcsec from the center; this enlarged the imaged sky area somewhat and facilitated the subtraction of the infrared emission from the sky background. The individual 1-min exposures were then very carefully co-aligned to obtain the highest possible spatial resolution and co-added. The resulting images cover a sky field of 3.4 x 3.4 arcmin 2 with a pixel size of 0.074 arcsec. The effective exposure times of the final broad-band images in the central 2.5 x 2.5 arcmin 2 area are 37, 45, and 48 min in the J s , H and K s filters, respectively. The final step involved the computer-aided detection of the individual stars in the frames, the measurement of their brightness as seen in the different

  15. 46 CFR 160.077-23 - Production tests and inspections.

    Science.gov (United States)

    2010-10-01

    ... fixed anchor, or (C) a tensile test machine that is capable of holding a given tension. The assembly... testing of each incoming lot of inflation chamber material before using that lot in production; (iii) Have... inspector must perform or supervise testing and inspection of at least one PFD lot in each five lots...

  16. Nano-sized quaternary CuGa2In3S8 as an efficient photocatalyst for solar hydrogen production

    KAUST Repository

    Kandiel, Tarek

    2014-09-03

    The synthesis of quaternary metal sulfide (QMS) nanocrystals is challenging because of the difficulty to control their stoichiometry and phase structure. Herein, quaternary CuGa2In3S8 photocatalysts with a primary particle size of ≈4nm are synthesized using a facile hot-injection method by fine-tuning the sulfur source injection temperature and aging time. Characterization of the samples reveals that quaternary CuGa2In3S8 nanocrystals exhibit n-type semiconductor characteristics with a transition band gap of ≈1.8eV. Their flatband potential is located at -0.56V versus the standard hydrogen electrode at pH6.0 and is shifted cathodically by 0.75V in solutions with pH values greater than 12.0. Under optimized conditions, the 1.0wt% Ru-loaded CuGa2In3S8 photocatalyst exhibits a photocatalytic H2 evolution response up to 700nm and an apparent quantum efficiency of (6.9±0.5)% at 560nm. These results indicate clearly that QMS nanocrystals have great potential as nano-photocatalysts for solar H2 production. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Recreating Riser Slugging Flow Based on an Economic Lab-sized Setup

    DEFF Research Database (Denmark)

    Hansen, Lasse; Pedersen, Simon; Yang, Zhenyu

    2013-01-01

    As a kind of periodic phenomenon, the slugging flow in the offshore oil & gas production addresses a lot of attentions, due to its limitation of production rate, periodic overload processing facilities, and even direct cause of emergent shutdown. This work studies the emulation of the riser...... slugging flow in the offshore oil & gas production, by constructing an economical lab-sized setup in the university campus. Firstly, the construction and used components for the lab setup are illustrated; then, the constructed setup is validated by checking the consistency with some existing typical riser...

  18. The Determination of Production and Distribution Policy in Push-Pull Production Chain with Supply Hub as the Junction Point

    Science.gov (United States)

    Sinaga, A. T.; Wangsaputra, R.

    2018-03-01

    The development of technology causes the needs of products and services become increasingly complex, diverse, and fluctuating. This causes the level of inter-company dependencies within a production chains increased. To be able to compete, efficiency improvements need to be done collaboratively in the production chain network. One of the efforts to increase efficiency is to harmonize production and distribution activities in the production chain network. This paper describes the harmonization of production and distribution activities by applying the use of push-pull system and supply hub in the production chain between two companies. The research methodology begins with conducting empirical and literature studies, formulating research questions, developing mathematical models, conducting trials and analyses, and taking conclusions. The relationship between the two companies is described in the MINLP mathematical model with the total cost of production chain as the objective function. Decisions generated by the mathematical models are the size of production lot, size of delivery lot, number of kanban, frequency of delivery, and the number of understock and overstock lot.

  19. Internationalisation Barriers of Small and Medium-sized Manufacturing Enterprises in Ethiopia: Leather and Leather Products Industry in Focus

    Directory of Open Access Journals (Sweden)

    Yehualashet Demeke Lakew

    2015-11-01

    Full Text Available The purpose of this study was to examine internationalisation barriers of manufacturing SMEs operating in Leather and Leather Products Industry located in the capital city of Ethiopia. The small and medium sized enterprises (SMEs sector in Ethiopia is a significant group within the economy in terms of firm numbers and total employment. However, the SMEs sector’s share of exports is disproportionately small, which raised considerable research concerns. Firm export propensity was the dependent variable and internal and external export barrier factors were used as explanatory variables. The study was conducted through mixed research design of quantitative survey and case study. From the population of manufacturing SMEs operating in the Leather and Leather products Industry, a sample was selected through the use of stratified random sampling to ensure the effective representation of the population of exporting and non-exporting SMEs in the capital of Ethiopia. In order to complement survey results nine (4 exporting and 5 non-exporting SMEs were selected through critical case purposive sampling and an in-depth interviews were conducted. Statistical package for the social sciences (SPSS 20 was used to analyse the quantitative data whereas, qualitative data were analysed manually. Exploratory factor analysis with Varimax rotation and Binary logistic regression analysis are the analytical methods used. The statistical result showed that, logistics problem, insufficient finance, functional barriers, lack of export knowledge and information, procedural barriers and international trade barriers are the most significant obstacles of export trade in Ethiopia. The overall results revealed that explanatory variables used in the analysis significantly predict the dependent variable at 95% confidence level. Taken together, these results prompted the presentation of numerous implications for theory, practice, and future research. Finally, the paper recommended

  20. Evaluation of primary immunization coverage of infants under universal immunization programme in an urban area of Bangalore city using cluster sampling and lot quality assurance sampling techniques

    Directory of Open Access Journals (Sweden)

    Punith K

    2008-01-01

    Full Text Available Research Question: Is LQAS technique better than cluster sampling technique in terms of resources to evaluate the immunization coverage in an urban area? Objective: To assess and compare the lot quality assurance sampling against cluster sampling in the evaluation of primary immunization coverage. Study Design: Population-based cross-sectional study. Study Setting: Areas under Mathikere Urban Health Center. Study Subjects: Children aged 12 months to 23 months. Sample Size: 220 in cluster sampling, 76 in lot quality assurance sampling. Statistical Analysis: Percentages and Proportions, Chi square Test. Results: (1 Using cluster sampling, the percentage of completely immunized, partially immunized and unimmunized children were 84.09%, 14.09% and 1.82%, respectively. With lot quality assurance sampling, it was 92.11%, 6.58% and 1.31%, respectively. (2 Immunization coverage levels as evaluated by cluster sampling technique were not statistically different from the coverage value as obtained by lot quality assurance sampling techniques. Considering the time and resources required, it was found that lot quality assurance sampling is a better technique in evaluating the primary immunization coverage in urban area.

  1. A Study on the Optimum Bucket Size for Master Scheduling : For the Case of Hierarchically tured Products

    OpenAIRE

    木内, 正光

    2010-01-01

    The function of master scheduling is to plan the flow of order from its arrival to its completion. In this study, the problem of bucket size for master scheduling is taken up. The bucket size for master scheduling has much influence on the lead time of the order. However, to date there is no clear method for how to set the optimum bucket size. The purpose of this study is to propose a method to set the optimum bucket size. In this paper, an equation to estimate the optimum bucket size is prop...

  2. Food size spectra, ingestion and growth of the copepod Acartia tonsa during development: implications for the determination of copepod production

    DEFF Research Database (Denmark)

    Berggren, U.; Hansen, B.; Kiørboe, Thomas

    1988-01-01

    Clearance rates on different sizes of spherically shaped algae were determined in uni-algal experiments for all developmental stages (NII through adult) of the copepodAcartia tonsa, and used to construct food size spectra. Growth and developmental rates were determined at 7 food levels (0 to 1 500...... g C l-1 ofRhodomonas baltica). The lower size limit for particle capture was between 2 and 4 m for all developmental stages. Optimum particle size and upper size limit increased during development from 7 m and 10 to 14 m for NII to NIII to 14 to 70 m and 250 m for adults, respectively. When food...... size spectra were normalized (percent of maximum clearance in a particular stage versus particle diameter/prosome length) they resembled log-normal distributions with near constant width (variance). Optimum, relative particle sizes corresponded to 2 to 5% of prosome length independent of developmental...

  3. Assessment of the within- and between-lot variability of Whatman™ FTA(®) DMPK and 903(®) DBS papers and their suitability for the quantitative bioanalysis of small molecules.

    Science.gov (United States)

    Luckwell, Jacquelynn; Denniff, Philip; Capper, Stephen; Michael, Paul; Spooner, Neil; Mallender, Philip; Johnson, Barry; Clegg, Sarah; Green, Mark; Ahmad, Sheelan; Woodford, Lynsey

    2013-11-01

    To ensure that PK data generated from DBS samples are of the highest quality, it is important that the paper substrate is uniform and does not unduly contribute to variability. This study investigated any within and between lot variations for four cellulose paper types: Whatman™ FTA(®) DMPK-A, -B and -C, and 903(®) (GE Healthcare, Buckinghamshire, UK). The substrates were tested to demonstrate manufacturing reproducibility (thickness, weight, chemical coating concentration) and its effect on the size of the DBS produced, and the quantitative data derived from the bioanalysis of human DBS samples containing six compounds of varying physicochemical properties. Within and between lot variations in paper thickness, mass and chemical coating concentration were within acceptable manufacturing limits. No variation in the spot size or bioanalytical data was observed. Bioanalytical results obtained for DBS samples containing a number of analytes spanning a range of chemical space are not affected by the lot used or by the location within a lot.

  4. Diurnal and seasonal variations of concentration and size distribution of nano aerosols (10-1100 nm) enclosing radon decay products in the Postojna Cave, Slovenia

    International Nuclear Information System (INIS)

    Bezek, M.; Gregoric, A.; Kavasi, N.; Vaupotic, J.

    2012-01-01

    At the lowest point along the tourist route in the Postojna Cave, the activity concentration of radon ( 222 Rn) short-lived decay products and number concentration and size distribution of background aerosol particles in the size range of 10-1100 nm were measured. In the warm yearly season, aerosol concentration was low (52 cm -3 ) with 21 % particles smaller than 50 nm, while in the cold season, it was higher (1238 cm -3 ) with 8 % of -3 , and fractions of unattached radon decay products were 0.62 and 0.13, respectively. (authors)

  5. Diurnal and seasonal variations of concentration and size distribution of nano aerosols (10-1100 nm) enclosing radon decay products in the Postojna Cave, Slovenia.

    Science.gov (United States)

    Bezek, M; Gregoric, A; Kávási, N; Vaupotic, J

    2012-11-01

    At the lowest point along the tourist route in the Postojna Cave, the activity concentration of radon ((222)Rn) short-lived decay products and number concentration and size distribution of background aerosol particles in the size range of 10-1100 nm were measured. In the warm yearly season, aerosol concentration was low (52 cm(-3)) with 21 % particles smaller than 50 nm, while in the cold season, it was higher (1238 cm(-3)) with 8 % of <50 nm particles. Radon activity concentrations were 4489 and 1108 Bq m(-3), and fractions of unattached radon decay products were 0.62 and 0.13, respectively.

  6. Runoff and Sediment Production under the Similar Rainfall Events in Different Aggregate Sizes of an Agricultural Soil

    Directory of Open Access Journals (Sweden)

    S. F. Eslami

    2016-09-01

    Full Text Available Introduction: Soil erosion by water is the most serious form of land degradation throughout the world, particularly in arid and semi-arid regions. In these areas, soils are weakly structured and are easily disrupted by raindrop impacts. Soil erosion is strongly affected by different factors such as rainfall characteristics, slope properties, vegetation cover, conservation practices, and soil erodibility. Different physicochemical soil properties such texture, structure, infiltration rate, organic matter, lime and exchangeable sodium percentage can affect the soil erodibility as well as soil erosion. Soil structure is one of the most important properties influencing runoff and soil loss because it determines the susceptibility of the aggregates to detach by either raindrop impacts or runoff shear stress. Many soil properties such as particle size distribution, organic matter, lime, gypsum, and exchangeable sodium percentage (ESP can affect the soil aggregation and the stability. Aggregates size distribution and their stability can be changed considerably because of agricultural practices. Information about variations of runoff and sediment in the rainfall events can be effective in modeling runoff as well as sediment. Thus, the study was conducted to determine runoff and sediment production of different aggregate sizes in the rainfall event scales. Materials and Methods: Toward the objective of the study, five aggregate classes consist of 0.25-2, 2-4.75, 4.75-5.6, 5.6-9.75, and 9.75-12.7 mm were collected from an agricultural sandy clay loam (0-30 cm using the related sieves in the field. Physicochemical soil analyses were performed in the aggregate samples using conventional methods in the lab. The aggregate samples were separately filed into fifteen flumes with a dimension of 50 cm × 100 cm and 15-cm in depth. The aggregate flumes were fixed on a steel plate with 9% slope and were exposed to the simulated rainfalls for investigating runoff and

  7. Nutrient concentrations in leachate and runoff from dairy cattle lots with different surface materials

    Science.gov (United States)

    Nitrogen (N) and phosphorus (P) loss from agriculture persists as a water quality issue, and outdoor cattle lots can have a high loss potential. We monitored hydrology and nutrient concentrations in leachate and runoff from dairy heifer lots constructed with three surface materials (soil, sand, bark...

  8. Applications of the lots computer code to laser fusion systems and other physical optics problems

    International Nuclear Information System (INIS)

    Lawrence, G.; Wolfe, P.N.

    1979-01-01

    The Laser Optical Train Simulation (LOTS) code has been developed at the Optical Sciences Center, University of Arizona under contract to Los Alamos Scientific Laboratory (LASL). LOTS is a diffraction based code designed to beam quality and energy of the laser fusion system in an end-to-end calculation

  9. LOD-a-lot : A queryable dump of the LOD cloud

    NARCIS (Netherlands)

    Fernández, Javier D.; Beek, Wouter; Martínez-Prieto, Miguel A.; Arias, Mario

    2017-01-01

    LOD-a-lot democratizes access to the Linked Open Data (LOD) Cloud by serving more than 28 billion unique triples from 650, K datasets over a single self-indexed file. This corpus can be queried online with a sustainable Linked Data Fragments interface, or downloaded and consumed locally: LOD-a-lot

  10. Multiple category-lot quality assurance sampling: a new classification system with application to schistosomiasis control.

    Science.gov (United States)

    Olives, Casey; Valadez, Joseph J; Brooker, Simon J; Pagano, Marcello

    2012-01-01

    Originally a binary classifier, Lot Quality Assurance Sampling (LQAS) has proven to be a useful tool for classification of the prevalence of Schistosoma mansoni into multiple categories (≤10%, >10 and LQAS (MC-LQAS) have not received full treatment. We explore the analytical properties of MC-LQAS, and validate its use for the classification of S. mansoni prevalence in multiple settings in East Africa. We outline MC-LQAS design principles and formulae for operating characteristic curves. In addition, we derive the average sample number for MC-LQAS when utilizing semi-curtailed sampling and introduce curtailed sampling in this setting. We also assess the performance of MC-LQAS designs with maximum sample sizes of n=15 and n=25 via a weighted kappa-statistic using S. mansoni data collected in 388 schools from four studies in East Africa. Overall performance of MC-LQAS classification was high (kappa-statistic of 0.87). In three of the studies, the kappa-statistic for a design with n=15 was greater than 0.75. In the fourth study, where these designs performed poorly (kappa-statistic less than 0.50), the majority of observations fell in regions where potential error is known to be high. Employment of semi-curtailed and curtailed sampling further reduced the sample size by as many as 0.5 and 3.5 observations per school, respectively, without increasing classification error. This work provides the needed analytics to understand the properties of MC-LQAS for assessing the prevalance of S. mansoni and shows that in most settings a sample size of 15 children provides a reliable classification of schools.

  11. Multiple category-lot quality assurance sampling: a new classification system with application to schistosomiasis control.

    Directory of Open Access Journals (Sweden)

    Casey Olives

    Full Text Available Originally a binary classifier, Lot Quality Assurance Sampling (LQAS has proven to be a useful tool for classification of the prevalence of Schistosoma mansoni into multiple categories (≤10%, >10 and <50%, ≥50%, and semi-curtailed sampling has been shown to effectively reduce the number of observations needed to reach a decision. To date the statistical underpinnings for Multiple Category-LQAS (MC-LQAS have not received full treatment. We explore the analytical properties of MC-LQAS, and validate its use for the classification of S. mansoni prevalence in multiple settings in East Africa.We outline MC-LQAS design principles and formulae for operating characteristic curves. In addition, we derive the average sample number for MC-LQAS when utilizing semi-curtailed sampling and introduce curtailed sampling in this setting. We also assess the performance of MC-LQAS designs with maximum sample sizes of n=15 and n=25 via a weighted kappa-statistic using S. mansoni data collected in 388 schools from four studies in East Africa.Overall performance of MC-LQAS classification was high (kappa-statistic of 0.87. In three of the studies, the kappa-statistic for a design with n=15 was greater than 0.75. In the fourth study, where these designs performed poorly (kappa-statistic less than 0.50, the majority of observations fell in regions where potential error is known to be high. Employment of semi-curtailed and curtailed sampling further reduced the sample size by as many as 0.5 and 3.5 observations per school, respectively, without increasing classification error.This work provides the needed analytics to understand the properties of MC-LQAS for assessing the prevalance of S. mansoni and shows that in most settings a sample size of 15 children provides a reliable classification of schools.

  12. 76 FR 42502 - Substantial Product Hazard List: Children's Upper Outerwear in Sizes 2T to 12 With Neck or Hood...

    Science.gov (United States)

    2011-07-19

    ... because children of those ages are most at risk. 4. Adult Apparel and Marketing Concerns (Comment 4)--Two... smaller adult sizes and larger children's sizes. Further, children at the pre-teen and teen stages often... channel, and the commenters raised concerns about the 2009 recall of children's hooded sweatshirts with...

  13. Size effects on acid bisulfite pretreatment efficiency: multiple product yields in spent liquor and enzymatic digestibility of pretreated solids

    Science.gov (United States)

    Yalan Liu; Jinwu Wang; Michael P. Wolcott

    2017-01-01

    Currently, feedstock size effects on chemical pretreatment performance were not clear due to the complexity of the pretreatment process and multiple evaluation standards such as the sugar recovery in spent liquor or enzymatic digestibility. In this study, we evaluated the size effects by various ways: the sugar recovery and coproduct yields in spent liquor, the...

  14. Lot-Order Assignment Applying Priority Rules for the Single-Machine Total Tardiness Scheduling with Nonnegative Time-Dependent Processing Times

    Directory of Open Access Journals (Sweden)

    Jae-Gon Kim

    2015-01-01

    Full Text Available Lot-order assignment is to assign items in lots being processed to orders to fulfill the orders. It is usually performed periodically for meeting the due dates of orders especially in a manufacturing industry with a long production cycle time such as the semiconductor manufacturing industry. In this paper, we consider the lot-order assignment problem (LOAP with the objective of minimizing the total tardiness of the orders with distinct due dates. We show that we can solve the LOAP optimally by finding an optimal sequence for the single-machine total tardiness scheduling problem with nonnegative time-dependent processing times (SMTTSP-NNTDPT. Also, we address how the priority rules for the SMTTSP can be modified to those for the SMTTSP-NNTDPT to solve the LOAP. In computational experiments, we discuss the performances of the suggested priority rules and show the result of the proposed approach outperforms that of the commercial optimization software package.

  15. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys.

    Directory of Open Access Journals (Sweden)

    Lauren Hund

    Full Text Available Lot quality assurance sampling (LQAS surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we compare these latter cluster LQAS methodologies and provide recommendations for choosing a cluster LQAS design. We compare technical differences in the three methods and determine situations in which the choice of method results in a substantively different design. We consider two different aspects of the methods: the distributional assumptions and the clustering parameterization. Further, we provide software tools for implementing each method and clarify misconceptions about these designs in the literature. We illustrate the differences in these methods using vaccination and nutrition cluster LQAS surveys as example designs. The cluster methods are not sensitive to the distributional assumptions but can result in substantially different designs (sample sizes depending on the clustering parameterization. However, none of the clustering parameterizations used in the existing methods appears to be consistent with the observed data, and, consequently, choice between the cluster LQAS methods is not straightforward. Further research should attempt to characterize clustering patterns in specific applications and provide suggestions for best-practice cluster LQAS designs on a setting-specific basis.

  16. Lot quality assurance sampling (LQAS) for monitoring leprosy elimination in an endemic district in Tamilnadu.

    Science.gov (United States)

    Murthy, B N; Subbiah, M; Boopathi, K; Ramakrishnan, R; Gupte, M D

    2001-01-01

    This paper examines whether the health administration can use lot quality assurance sampling (LQAS) for identifying high prevalence areas for leprosy for initiating necessary corrective measures. The null hypothesis was that leprosy prevalence in the district was at or above ten per 10,000 and the alternative hypothesis was that it was at or below five per 10,000. A total of 25,500 individuals were to be examined with 17 as an acceptable maximum number of cases (critical value). Two-stage cluster sample design was adopted. The sample size need not be escalated as the estimated design effect was 1. During the first phase, the survey covered a population of 4,837 individuals out of whom 4,329 (89.5%) were examined. Thirty-five cases were detected and this number far exceeded the critical value. It was concluded that leprosy prevalence in the district should be regarded as having prevalence of more than ten per 10,000 and further examination of the population in the sample was discontinued. LQAS may be used as a tool by which one can identify high prevalence districts and target them for necessary strengthening of the programme. It may also be considered for certifying elimination achievement for a given area.

  17. Lot quality assurance sampling for screening communities hyperendemic for Schistosoma mansoni.

    Science.gov (United States)

    Rabarijaona, L P; Boisier, P; Ravaoalimalala, V E; Jeanne, I; Roux, J F; Jutand, M A; Salamon, R

    2003-04-01

    Lot quality assurance sampling (LQAS) was evaluated for rapid low cost identification of communities where Schistosoma mansoni infection was hyperendemic in southern Madagascar. In the study area, S. mansoni infection shows very focused and heterogeneous distribution requiring multifariousness of local surveys. One sampling plan was tested in the field with schoolchildren and several others were simulated in the laboratory. Randomization and stool specimen collection were performed by voluntary teachers under direct supervision of the study staff and no significant problem occurred. As expected from Receiver Operating Characteristic (ROC) curves, all sampling plans allowed correct identification of hyperendemic communities and of most of the hypoendemic ones. Frequent misclassifications occurred for communities with intermediate prevalence and the cheapest plans had very low specificity. The study confirmed that LQAS would be a valuable tool for large scale screening in a country with scarce financial and staff resources. Involving teachers, appeared to be quite feasible and should not lower the reliability of surveys. We recommend that the national schistosomiasis control programme systematically uses LQAS for identification of communities, provided that sample sizes are adapted to the specific epidemiological patterns of S. mansoni infection in the main regions.

  18. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys.

    Science.gov (United States)

    Hund, Lauren; Bedrick, Edward J; Pagano, Marcello

    2015-01-01

    Lot quality assurance sampling (LQAS) surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we compare these latter cluster LQAS methodologies and provide recommendations for choosing a cluster LQAS design. We compare technical differences in the three methods and determine situations in which the choice of method results in a substantively different design. We consider two different aspects of the methods: the distributional assumptions and the clustering parameterization. Further, we provide software tools for implementing each method and clarify misconceptions about these designs in the literature. We illustrate the differences in these methods using vaccination and nutrition cluster LQAS surveys as example designs. The cluster methods are not sensitive to the distributional assumptions but can result in substantially different designs (sample sizes) depending on the clustering parameterization. However, none of the clustering parameterizations used in the existing methods appears to be consistent with the observed data, and, consequently, choice between the cluster LQAS methods is not straightforward. Further research should attempt to characterize clustering patterns in specific applications and provide suggestions for best-practice cluster LQAS designs on a setting-specific basis.

  19. Size matters

    Energy Technology Data Exchange (ETDEWEB)

    Forst, Michael

    2012-11-01

    The shakeout in the solar cell and module industry is in full swing. While the number of companies and production locations shutting down in the Western world is increasing, the capacity expansion in the Far East seems to be unbroken. Size in combination with a good sales network has become the key to success for surviving in the current storm. The trade war with China already looming on the horizon is adding to the uncertainties. (orig.)

  20. Relationship between size and surface modification of silica particles and enhancement and suppression of inflammatory cytokine production by lipopolysaccharide- or peptidoglycan-stimulated RAW264.7 macrophages

    Energy Technology Data Exchange (ETDEWEB)

    Uemura, Eiichiro, E-mail: uemura-e@phs.osaka-u.ac.jp; Yoshioka, Yasuo, E-mail: y-yoshioka@biken.osaka-u.ac.jp; Hirai, Toshiro, E-mail: toshiro.hirai@pitt.edu; Handa, Takayuki, E-mail: handa-t@phs.osaka-u.ac.jp; Nagano, Kazuya, E-mail: knagano@phs.osaka-u.ac.jp; Higashisaka, Kazuma, E-mail: higashisaka@phs.osaka-u.ac.jp; Tsutsumi, Yasuo, E-mail: ytsutsumi@phs.osaka-u.ac.jp [Osaka University, Laboratory of Toxicology and Safety Science, Graduate School of Pharmaceutical Sciences (Japan)

    2016-06-15

    Although nanomaterials are used in an increasing number of commodities, the relationships between their immunotoxicity and physicochemical properties such as size or surface characteristics are not fully understood. Here we demonstrated that pretreatment with amorphous silica particles (SPs) of various sizes (diameters of 10–1000 nm), with or without amine surface modification, significantly decreased interleukin 6 production by RAW264.7 macrophages following lipopolysaccharide or peptidoglycan stimulation. Furthermore, nanosized, but not microsized, SPs significantly enhanced tumor necrosis factor-α production in macrophages stimulated with lipopolysaccharide. This altered cytokine response was distinct from the inflammatory responses induced by treatment with the SPs alone. Additionally, the uptake of SPs into macrophages by phagocytosis was found to be crucial for the suppression of macrophage immune response to occur, irrespective of particle size or surface modification. Together, these results suggest that SPs may not only increase susceptibility to microbial infection, but that they may also be potentially effective immunosuppressants.

  1. Relationship between size and surface modification of silica particles and enhancement and suppression of inflammatory cytokine production by lipopolysaccharide- or peptidoglycan-stimulated RAW264.7 macrophages

    International Nuclear Information System (INIS)

    Uemura, Eiichiro; Yoshioka, Yasuo; Hirai, Toshiro; Handa, Takayuki; Nagano, Kazuya; Higashisaka, Kazuma; Tsutsumi, Yasuo

    2016-01-01

    Although nanomaterials are used in an increasing number of commodities, the relationships between their immunotoxicity and physicochemical properties such as size or surface characteristics are not fully understood. Here we demonstrated that pretreatment with amorphous silica particles (SPs) of various sizes (diameters of 10–1000 nm), with or without amine surface modification, significantly decreased interleukin 6 production by RAW264.7 macrophages following lipopolysaccharide or peptidoglycan stimulation. Furthermore, nanosized, but not microsized, SPs significantly enhanced tumor necrosis factor-α production in macrophages stimulated with lipopolysaccharide. This altered cytokine response was distinct from the inflammatory responses induced by treatment with the SPs alone. Additionally, the uptake of SPs into macrophages by phagocytosis was found to be crucial for the suppression of macrophage immune response to occur, irrespective of particle size or surface modification. Together, these results suggest that SPs may not only increase susceptibility to microbial infection, but that they may also be potentially effective immunosuppressants.

  2. EMODnet Thematic Lot n° 4 - Chemistry

    DEFF Research Database (Denmark)

    Beckers, Jean-Marie; Buga, Luminita; Debray, Noelie

    2015-01-01

    Data quality assurance and quality control (QA/QC) is an important issue in oceanographic data management, especially for the creation of multidisciplinary and comprehensive databases which include data from different and/or unknown origin covering long time periods. The data-collection methods i...... inconsistent data quality flags and the need for coordination and harmonization of practices. A dedicated workshop was organized to review the different practices and agree on a common methodology for data QA/QC and Diva products generation for EMODnet Chemistry....... will contribute considerably to the validation of large data collections. This report intends to be a reference manual for EMODnet Chemistry data QA/QC and the subsequent product generation. In fact, during the first data validation loop, each region adopted its own protocol and the results showed many...

  3. Galaxy Clusters, Near and Far, Have a Lot in Common

    Science.gov (United States)

    2005-04-01

    clusters are merging and another extremely massive cluster which appears very "relaxed" and undisturbed. The X-ray data allowed the scientists to measure the temperatures and luminosities of the gas in the clusters. They were then able to infer their total masses, which varied between 200 and 1,100 times the mass of our Milky Way galaxy. These measurements were then used to test whether galaxy clusters of different sizes and located at different distances from us are simply scaled versions of each other -- a condition known as being "self-similar." This is an important characteristic for astronomers to identify if they hope to get the true weights of galaxy clusters. "For example, chocolate bars are strongly self-similar," said Maughan. "If you shrank a king-size bar to a fun-size bar, they would be identical versions of each other but just different sizes." "However, if you shrank a castle to the size of a bungalow, they would be very different structures, despite being the same size. This means that they are not strongly self-similar objects." Another possible type of relationship between clusters is what scientists call "weakly self-similar." In this case, galaxy clusters in the distant universe and those nearby are almost identical to each other, but not exactly the same. (The only differences between them can be accounted for by the expansion of the Universe since the Big Bang.) Although astronomers have known for some time that galaxy clusters are not strongly self-similar, the question of whether or not they are weakly self-similar has remained open. The new results show that as long as astronomers take into account the continuous expansion of the Universe, then galaxy clusters are, in fact, weakly self-similar. This means that the same scaling relations used to weigh nearby galaxy clusters hold true for these very distant clusters. "Our results mean that weighing distant galaxy clusters could become as easy as converting from Fahrenheit to Celsius," said Maughan

  4. Evaluation of Radon Pollution in Underground Parking Lots by Discomfort Index

    Directory of Open Access Journals (Sweden)

    AH Bu-Olayan

    2016-06-01

    Full Text Available Introduction Recent studies of public underground parking lots showed the influence of radon concentration and the probable discomfort caused by parking cars. Materials and Methods Radon concentration was measured in semi-closed public parking lots in the six governorates of Kuwait, using Durridge RAD7radon detector (USA. Results The peak radon concentration in the parking lots of Kuwait governorates was relatively higher during winter (63.15Bq/m3 compared to summer (41.73 Bq/m3. Radon in the evaluated parking lots revealed a mean annual absorbed dose (DRn: 0.02mSv/y and annual effective dose (HE: 0.06mSv/y.  Conclusion This study validated the influence of relative humidity and temperature as the major components of discomfort index (DI. The mean annual absorbed and effective dose  of radon in the evaluated parking lots were found below the permissible limits. However, high radon DRn and HE were reported when the assessment included the parking lots, the surrounding residential apartments, and office premises. Furthermore, the time-series analysis indicated significant variations of the seasonal and site-wise distribution of radon concentrations in the indoor evaluated parking lots of the six Kuwait governorates

  5. Lot quality assurance sampling for monitoring coverage and quality of a targeted condom social marketing programme in traditional and non-traditional outlets in India.

    Science.gov (United States)

    Piot, Bram; Mukherjee, Amajit; Navin, Deepa; Krishnan, Nattu; Bhardwaj, Ashish; Sharma, Vivek; Marjara, Pritpal

    2010-02-01

    This study reports on the results of a large-scale targeted condom social marketing campaign in and around areas where female sex workers are present. The paper also describes the method that was used for the routine monitoring of condom availability in these sites. The lot quality assurance sampling (LQAS) method was used for the assessment of the geographical coverage and quality of coverage of condoms in target areas in four states and along selected national highways in India, as part of Avahan, the India AIDS initiative. A significant general increase in condom availability was observed in the intervention area between 2005 and 2008. High coverage rates were gradually achieved through an extensive network of pharmacies and particularly of non-traditional outlets, whereas traditional outlets were instrumental in providing large volumes of condoms. LQAS is seen as a valuable tool for the routine monitoring of the geographical coverage and of the quality of delivery systems of condoms and of health products and services in general. With a relatively small sample size, easy data collection procedures and simple analytical methods, it was possible to inform decision-makers regularly on progress towards coverage targets.

  6. Development toward rapid and efficient screening for high performance hydrolysate lots in a recombinant monoclonal antibody manufacturing process.

    Science.gov (United States)

    Luo, Ying; Pierce, Karisa M

    2012-07-01

    Plant-derived hydrolysates are widely used in mammalian cell culture media to increase yields of recombinant proteins and monoclonal antibodies (mAbs). However, these chemically varied and undefined raw materials can have negative impact on yield and/or product quality in large-scale cell culture processes. Traditional methods that rely on fractionation of hydrolysates yielded little success in improving hydrolysate quality. We took a holistic approach to develop an efficient and reliable method to screen intact soy hydrolysate lots for commercial recombinant mAb manufacturing. Combined high-resolution (1) H nuclear magnetic resonance (NMR) spectroscopy and partial least squares (PLS) analysis led to a prediction model between product titer and NMR fingerprinting of soy hydrolysate with cross-validated correlation coefficient R(2) of 0.87 and root-mean-squared-error of cross-validation RMSECV% of 11.2%. This approach screens for high performance hydrolysate lots, therefore ensuring process consistency and product quality in the mAb manufacturing process. Furthermore, PLS analysis was successful in discerning multiple markers (DL-lactate, soy saccharides, citrate and succinate) among hydrolysate components that positively and negatively correlate with titer. Interestingly, these markers correlate to the metabolic characteristics of some strains of taxonomically diverse lactic acid bacteria (LAB). Thus our findings indicate that LAB strains may exist during hydrolysate manufacturing steps and their biochemical activities may attribute to the titer enhancement effect of soy hydrolysates. Copyright © 2012 American Institute of Chemical Engineers (AIChE).

  7. Simulated annealing and joint manufacturing batch-sizing

    Directory of Open Access Journals (Sweden)

    Sarker Ruhul

    2003-01-01

    Full Text Available We address an important problem of a manufacturing system. The system procures raw materials from outside suppliers in a lot and processes them to produce finished goods. It proposes an ordering policy for raw materials to meet the requirements of a production facility. In return, this facility has to deliver finished products demanded by external buyers at fixed time intervals. First, a general cost model is developed considering both raw materials and finished products. Then this model is used to develop a simulated annealing approach to determining an optimal ordering policy for procurement of raw materials and also for the manufacturing batch size to minimize the total cost for meeting customer demands in time. The solutions obtained were compared with those of traditional approaches. Numerical examples are presented. .

  8. On the role of metal particle size and surface coverage for photo-catalytic hydrogen production; a case study of the Au/CdS system

    KAUST Repository

    Majeed, I.

    2015-09-25

    Photo-catalytic hydrogen production has been studied on Au supported CdS catalysts under visible light irradiation in order to understand the effect of Au particle size as well as the reaction medium properties. Au nanoparticles of size about 2-5 nm were deposited over hexagonal CdS particles using a new simple method involving reduction of Au3+ ions with iodide ions. Within the investigated range of Au (between 1 and 5 wt. %) fresh particles with mean size of 4 nm and XPS Au4f/Cd3d surface ratio of 0.07 showed the highest performance (ca. 1 molecule of H2 / Auatom s−1) under visible light irradiation (>420 nm and a flux of 35 mW/cm2). The highest hydrogen production rate was obtained from water (92%)-ethanol (8%) in an electrolyte medium (Na2S-Na2SO3). TEM studies of fresh and used catalysts showed that Au particle size increases (almost 5 fold) with increasing photo-irradiation time due to photo-agglomeration effect yet no sign of deactivation was observed. A mechanism for hydrogen production from ethanol-water electrolyte mixture is presented and discussed.

  9. The 'Thinking a Lot' Idiom of Distress and PTSD: An Examination of Their Relationship among Traumatized Cambodian Refugees Using the 'Thinking a Lot' Questionnaire

    NARCIS (Netherlands)

    Hinton, D.E.; Reis, R.; de Jong, J.

    2015-01-01

    "Thinking a lot" (TAL)—also referred to as "thinking too much"—is a key complaint in many cultural contexts, and the current article profiles this idiom of distress among Cambodian refugees. The article also proposes a general model of how TAL generates various types of distress that then cause

  10. Marketing eco-power - still lots to be done

    International Nuclear Information System (INIS)

    Baettig, I.

    2005-01-01

    This article takes a look at the various eco-power offers that can currently be found on the Swiss electricity market. Various electricity utilities offer ecologically produced power in various qualities under several different names. These range from pure solar power through to various mixes of solar, wind and hydro power. The varying marketing approaches used are discussed. Local utilities have the most success in selling eco-power, whereas a large Swiss supermarket chain had difficulty selling its customers certificates for renewable electricity. This, according to the chain's speaker, was due to the difficulty of explaining the relationship between production certificates and the actual power drawn from the wall socket. The offers of various utilities and independent power producers are looked at and discussed with those responsible

  11. Dying Stars Indicate Lots of Dark Matter in Giant Galaxy

    Science.gov (United States)

    1994-04-01

    nebulae at once. In view of the very long exposure times needed, this is an absolute must in order to perform these observations within the available telescope time. Before the observations can begin, the exact positions of the planetary nebulae are measured. A metal mask is then prepared with holes that permit the light from these objects to pass into EMMI, but at the same time blocks most of the much brighter, disturbing light emitted the by Earth's atmosphere. With an additional optical filter, all but the green light is effectively filtered out; this further ``removes'' unwanted light and improves the chances of effective registration of the faint light from the planetary nebulae in NGC 1399. VELOCITIES OF PLANETARY NEBULAE IN NGC 1399 The careful preparations paid off and this observational strategy was successful. During two of the allocated nights (the third was lost due to bad weather), the Australian observers (Magda Arnaboldi and Ken Freeman) were able for the first time to measure individual velocities for 37 planetary nebulae in NGC 1399. Some of these are indicated on the picture that accompanies this Press Release. The difficulty of this observation is illustrated by the fact that in order to catch enough light from these faint objects, the total exposure time was no less than 5 hours and only one field on either side of the galaxy could be observed per night. Already at the telescope the astronomers realised that the new results are very exciting; this was fully confirmed by the following long and complicated process of data reduction. In fact, although the inner parts of this galaxy rotate quite slowly, the planetary nebulae in the outer regions are in rapid motion and clearly indicate a fast rotation of these parts of the galaxy. This new observation is just as expected from the above described theory for the formation of giant galaxies and therefore provides very strong support for this theory. LOTS OF DARK MATTER IN NGC 1399 Perhaps the most exciting

  12. Study of the effect of plant growth regulators, size, and cultivar of the grape inflorescence explant on production of phenolic compounds in an in vitro condition

    Directory of Open Access Journals (Sweden)

    Sedighi Azam

    2014-01-01

    Full Text Available Introduction: Phenolic compounds are a large number of secondary metabolites that have useful and desirable effects in the field of agriculture, medicine, and food. This research was aimed to achieve methods of in vitro propagation of grapevine in order to apply biotechnologies for correction, growth, and optimization of products and compounds of the cultivated plant in relation to phenol ratio. Methods: In this interventional study, the effects of cultivar and size of the inflorescence explant and the gibberellin hormone in two levels, benzylaminopurine, and auxin hormones in three levels with three replicates per treatment were evaluated in relation to phenol ratio, in order to evaluate the effect of plant growth regulators, the type and size of the grape inflorescence explant on the phenol production. Results: The type of plant growth regulators affected phenolic substances production. The production of phenolic substances decreased in a medium with the highest concentration of growth regulators, 4 and 2.5 μM concentration of benzylaminopurine, and 4.9 μM of auxin. Production of phenolic substances increased in the free-plant hormone medium. In smaller samples tendency to turn brown was more regarding high amount of the sugar. Conclusion: The plant sample and the cultivar as important factors in producing phenol environment are induced by environmental stimuli like sugar, light, temperature, stress, ozone, and wound and can be actually applied to increase phenol production.

  13. Design Schematics for a Sustainable Parking Lot: Building 2-2332, ENRD Classroom, Fort Bragg, NC

    National Research Council Canada - National Science Library

    Stumpf, Annette

    2003-01-01

    ...) was tasked with planning a sustainable design "charrette" to explore and develop alternative parking lot designs that would meet Fort Bragg's parking needs, as well as its need to meet sustainable...

  14. MOTIVASI PEREMPUAN MEMBUKA USAHA SEKTOR INFORMAL DI DAYA TARIK WISATA TANAH LOT, TABANAN

    Directory of Open Access Journals (Sweden)

    Luh Putu Aritiana Kumala Pratiwi

    2016-08-01

    Full Text Available The development of tourism in Tanah Lot has been able to open up opportunities for local women. The businesses that mostly cultivated by women are the selling of traditional snacks of klepon, postcards, and hairpins.Women who participate should reconsider their decision to choose a dual role, both as housewives and sellers in Tanah Lot.This article analyzes the motivation of Women in opening a business in Tanah Lot area.The results showed that the motivation of women to open a business in the informal sector in Tanah Lot, namely to be able to meet the physiological needs, safety needs, affiliations, appreciation, self-actualization, and add to work experience. The factors that affect women’s motivations are internal factors such as age, educational background, family income, and marital status. While the external factors namely selling location, the condition of selling place, and having their own income.

  15. Hybrid Discrete Differential Evolution Algorithm for Lot Splitting with Capacity Constraints in Flexible Job Scheduling

    Directory of Open Access Journals (Sweden)

    Xinli Xu

    2013-01-01

    Full Text Available A two-level batch chromosome coding scheme is proposed to solve the lot splitting problem with equipment capacity constraints in flexible job shop scheduling, which includes a lot splitting chromosome and a lot scheduling chromosome. To balance global search and local exploration of the differential evolution algorithm, a hybrid discrete differential evolution algorithm (HDDE is presented, in which the local strategy with dynamic random searching based on the critical path and a random mutation operator is developed. The performance of HDDE was experimented with 14 benchmark problems and the practical dye vat scheduling problem. The simulation results showed that the proposed algorithm has the strong global search capability and can effectively solve the practical lot splitting problems with equipment capacity constraints.

  16. Changes in wood product proportions in the Douglas-fir region with respect to size, age, and time.

    Science.gov (United States)

    R.A. Monserud; X. Zhou

    2007-01-01

    We examine both the variation and the changing proportions of different wood products obtained from trees and logs in the Douglas-fir region of the Northwestern United States. Analyses are based on a large product recovery database covering over 40 years of recovery studies; 13 studies are available for Douglas-fir (Pseudotsuga menziesii (Mirb.)...

  17. Absorption-based algorithm of primary production for total and size-fractionated phytoplankton in coastal waters

    NARCIS (Netherlands)

    Barnes, M.K.; Tilstone, G.H.; Smyth, T.J.; Suggett, D.J.; Astoreca, R.; Lancelot, C.; Kromkamp, J.C.

    2014-01-01

    Most satellite models of production have been designed and calibrated for use in the open ocean. Coastal waters are optically more complex, and the use of chlorophyll a (chl a) as a first-order predictor of primary production may lead to substantial errors due to significant quantities

  18. Nano-sized quaternary CuGa2In3S8 as an efficient photocatalyst for solar hydrogen production

    KAUST Repository

    Kandiel, Tarek; Anjum, Dalaver H.; Takanabe, Kazuhiro

    2014-01-01

    The synthesis of quaternary metal sulfide (QMS) nanocrystals is challenging because of the difficulty to control their stoichiometry and phase structure. Herein, quaternary CuGa2In3S8 photocatalysts with a primary particle size of ≈4nm

  19. Particle-size distribution of fission products in airborne dust collected at Tsukuba from April to June 1986

    International Nuclear Information System (INIS)

    Ooe, Hiroko; Seki, Riki; Ikeda, Nagao

    1988-01-01

    The radioactivity released by the reactor accident at Chernobyl was detected in surface air at Tsukuba, Japan. Gamma-spectrometry of airborne dust collected using aerodynamic separation showed higher concentrations of radionuclides in fine particles. The particle-size distribution of radionuclides changed with time. (author)

  20. Cavity size and copper root pruning affect production and establishment of container-grown longleaf pine seedlings

    Science.gov (United States)

    Marry Anne Sword Sayer; James D. Haywood; Shi-Jean Susana Sung

    2009-01-01

    With six container types, we tested the effects of cavity size (i.e., 60, 93, and 170 ml) and copper root pruning on the root system development of longleaf pine (Pinus palustris Mill.) seedlings grown in a greenhouse. We then evaluated root egress during a root growth potential test and assessed seedling morphology and root system development 1 year after planting in...

  1. Effect of acid, steam explosion, and size reduction pretreatments on bio-oil production from sweetgum, switchgrass, and corn stover.

    Science.gov (United States)

    Wang, Hui; Srinivasan, Radhakrishnan; Yu, Fei; Steele, Philip; Li, Qi; Mitchell, Brian; Samala, Aditya

    2012-05-01

    Bio-oil produced from biomass by fast pyrolysis has the potential to be a valuable substitute for fossil fuels. In a recent work on pinewood, we found that pretreatment alters the structure and chemical composition of biomass, which influence fast pyrolysis. In this study, we evaluated dilute acid, steam explosion, and size reduction pretreatments on sweetgum, switchgrass, and corn stover feedstocks. Bio-oils were produced from untreated and pretreated feedstocks in an auger reactor at 450 °C. The bio-oil's physical properties of pH, water content, acid value, density, and viscosity were measured. The chemical characteristics of the bio-oils were determined by gas chromatography-mass spectrometry. The results showed that bio-oil yield and composition were influenced by the pretreatment method and feedstock type. Bio-oil yields of 52, 33, and 35 wt% were obtained from medium-sized (0.68-1.532 mm) untreated sweetgum, switchgrass, and corn stover, respectively, which were higher than the yields from other sizes. Bio-oil yields of 56, 46, and 51 wt% were obtained from 1% H(2)SO(4)-treated medium-sized sweetgum, switchgrass, and corn stover, respectively, which were higher than the yields from untreated and steam explosion treatments.

  2. Simultaneous Optimal Placement of Distributed Generation and Electric Vehicle Parking Lots Based on Probabilistic EV Model

    OpenAIRE

    M.H. Amini; M. Parsa Moghaddam

    2013-01-01

    High penetration of distributed generations and the increasing demand for using electric vehicles provide a lot of issues for the utilities. If these two effective elements of the future power system are used in an unscheduled manner, it may lead to the loss increment in distribution networks, dramatically. In this paper, the simultaneous allocation of distributed generations (DGs) and electric vehicles (EVs) parking lots has been studied in a radial distribution network. A distribution netwo...

  3. Note sur l'histoire démographique de Douelle (Lot) 1676-1914

    OpenAIRE

    Jean Fourastié

    1986-01-01

    Fourastié Jean. ? Note on the demographic history of Douelle (Lot) 1676-1914. This article summarizes the demographic data contained in a book about the village of Douelle in the department of the Lot. Both family reconstitution and genealogies have been used to ascertain the major demographic characteristics of this region during the 17th and 18th centuries : a high rate of endogamous marriages, few remarriages, declining birth rates before the Revolution, a very low number of illegitimate b...

  4. Military Observer Mission Ecuador-Peru (MOMEP) Doing a Lot with a Little.

    Science.gov (United States)

    1997-06-01

    IPS), URL: <htttp://web.maxwell.syr.edu.nativew...aphy/latinam/ ecuador /borderl6.html>, accessed 10 November 1996, pp. 1-2. 蔵 "Evacuees in Loja Number...OBSERVER MISSION ECUADOR -PERU (MOMEP) DOING A LOT WITH A LITTLE BY LIEUTENANT COLONEL KEVIN M. HIGGINS United States Army DISTRIBUTION STATEMENT A...MISSION ECUADOR -PERU (MOMEP) Doing A Lot With a Little by Lieutenant Colonel Kevin M. Higgins United States Army Naval Postgraduate School Special

  5. A Decision-making Model for a Two-stage Production-delivery System in SCM Environment

    Science.gov (United States)

    Feng, Ding-Zhong; Yamashiro, Mitsuo

    A decision-making model is developed for an optimal production policy in a two-stage production-delivery system that incorporates a fixed quantity supply of finished goods to a buyer at a fixed interval of time. First, a general cost model is formulated considering both supplier (of raw materials) and buyer (of finished products) sides. Then an optimal solution to the problem is derived on basis of the cost model. Using the proposed model and its optimal solution, one can determine optimal production lot size for each stage, optimal number of transportation for semi-finished goods, and optimal quantity of semi-finished goods transported each time to meet the lumpy demand of consumers. Also, we examine the sensitivity of raw materials ordering and production lot size to changes in ordering cost, transportation cost and manufacturing setup cost. A pragmatic computation approach for operational situations is proposed to solve integer approximation solution. Finally, we give some numerical examples.

  6. Synthesis of high efficient Cu/TiO2 photocatalysts by grinding and their size-dependent photocatalytic hydrogen production

    International Nuclear Information System (INIS)

    Ni, Dawei; Shen, Haiyan; Li, Huiqiao; Ma, Ying; Zhai, Tianyou

    2017-01-01

    Highlights: • Cu nanodots were decorated on TiO 2 surface through ball milling method. • Its size distribution was investigated in water and ethanolic medium. • Photocurrent response and hydrogen evolution was improved. • Performance was found to be dependent on size of Cu nanodots. - Abstract: Recently, copper species have been extensively investigated to replace Pt as efficient co-catalysts for the evolution of H 2 due to their low cost and relatively high activity. Cu nanoparticles less than 5 nm are successfully decorated on TiO 2 surface in this work by an easy and mild milling process. These Cu nanoparticles are highly dispersed on TiO 2 when the loading amount of Cu is no more than 10 wt%. The sizes of Cu nanoparticles can be controlled by changing the milling environment and decrease in the order of Cu-ethanol > Cu-water > Cu nanoparticles obtained through drying milling. The highest and stable hydrogen generation can be realized on Cu/TiO 2 with 2.0 wt% Cu and sizes of Cu nanoparticles ranging from 2 to 4 nm, in which high and stable photocurrent confirms promoted photogenerated charge separation. Smaller Cu clusters are demonstrated to be detrimental to hydrogen evolution at same Cu content. High loading of Cu nanoparticles of 2–4 nm will benefit photogenerated electron-hole recombination and thus decrease the activity of Cu/TiO 2 . The results here demonstrate the key roles of Cu cluster size in addition to Cu coverage on photocatalytic activity of Cu/TiO 2 composite photocatalysts.

  7. Coal-tar-based parking lot sealcoat: An unrecognized source of PAH to settled house dust

    Science.gov (United States)

    Mahler, B.J.; Van Metre, P.C.; Wilson, J.T.; Musgrove, M.; Burbank, T.L.; Ennis, T.E.; Bashara, T.J.

    2010-01-01

    Despite much speculation, the principal factors controlling concentrations of polycyclic aromatic hydrocarbons (PAH) in settled house dust (SHD) have not yet been identified. In response to recent reports that dust from pavement with coaltar-based sealcoat contains extremely high concentrations of PAH, we measured PAH in SHD from 23 apartments and in dust from their associated parking lots, one-half of which had coal-tar-based sealcoat (CT). The median concentration of total PAH (T-PAH) in dust from CT parking lots (4760 ??g/g, n = 11) was 530 times higher than that from parking lots with other pavement surface types (asphalt-based sealcoat, unsealed asphalt, concrete [median 9.0 ??g/g, n = 12]). T-PAH in SHD from apartments with CT parking lots (median 129 ??g/g) was 25 times higher than that in SHD from apartments with parking lots with other pavement surface types (median 5.1 ??g/g). Presence or absence of CT on a parking lot explained 48% of the variance in log-transformed T-PAH in SHD. Urban land-use intensity near the residence also had a significant but weaker relation to T-PAH. No other variables tested, including carpeting, frequency of vacuuming, and indoor burning, were significant. ?? 2010 American Chemical Society.

  8. Evaluation of coverage of enriched UF6 cylinder storage lots by existing criticality accident alarms

    International Nuclear Information System (INIS)

    Lee, B.L. Jr.; Dobelbower, M.C.; Woollard, J.E.; Sutherland, P.J.; Tayloe, R.W. Jr.

    1995-03-01

    The Portsmouth Gaseous Diffusion Plant (PORTS) is leased from the US Department of Energy (DOE) by the United States Enrichment Corporation (USEC), a government corporation formed in 1993. PORTS is in transition from regulation by DOE to regulation by the Nuclear Regulatory Commission (NRC). One regulation is 10 CFR Part 76.89, which requires that criticality alarm systems be provided for the site. PORTS originally installed criticality accident alarm systems in all building for which nuclear criticality accidents were credible. Currently, however, alarm systems are not installed in the enriched uranium hexafluoride (UF 6 ) cylinder storage lots. This report analyzes and documents the extent to which enriched UF 6 cylinder storage lots at PORTS are covered by criticality detectors and alarms currently installed in adjacent buildings. Monte Carlo calculations are performed on simplified models of the cylinder storage lots and adjacent buildings. The storage lots modelled are X-745B, X-745C, X745D, X-745E, and X-745F. The criticality detectors modelled are located in building X-343, the building X-344A/X-342A complex, and portions of building X-330 (see Figures 1 and 2). These criticality detectors are those located closest to the cylinder storage lots. Results of this analysis indicate that the existing criticality detectors currently installed at PORTS are largely ineffective in detecting neutron radiation from criticality accidents in most of the cylinder storage lots at PORTS, except sometimes along portions of their peripheries

  9. Single Machine Multi-product Capacitated Lotsizing with Sequence-dependent Setups

    OpenAIRE

    Almada-Lobo , Bernardo; Klabjan , Diego; Carravilla , Maria Antónia; Oliveira , Jose Fernando

    2007-01-01

    Abstract In production planning in the glass container industry, machine dependent setup times and costs are incurred for switchovers from one product to another. The resulting multi-item capacitated lot sizing problem has sequence-dependent setup times and costs. We present two novel linear mixed integer programming formulations for this problem, incorporating all the necessary features of setup carryovers. The compact formulation has polynomially many constraints, while, on the o...

  10. Cluster lot quality assurance sampling: effect of increasing the number of clusters on classification precision and operational feasibility.

    Science.gov (United States)

    Okayasu, Hiromasa; Brown, Alexandra E; Nzioki, Michael M; Gasasira, Alex N; Takane, Marina; Mkanda, Pascal; Wassilak, Steven G F; Sutter, Roland W

    2014-11-01

    To assess the quality of supplementary immunization activities (SIAs), the Global Polio Eradication Initiative (GPEI) has used cluster lot quality assurance sampling (C-LQAS) methods since 2009. However, since the inception of C-LQAS, questions have been raised about the optimal balance between operational feasibility and precision of classification of lots to identify areas with low SIA quality that require corrective programmatic action. To determine if an increased precision in classification would result in differential programmatic decision making, we conducted a pilot evaluation in 4 local government areas (LGAs) in Nigeria with an expanded LQAS sample size of 16 clusters (instead of the standard 6 clusters) of 10 subjects each. The results showed greater heterogeneity between clusters than the assumed standard deviation of 10%, ranging from 12% to 23%. Comparing the distribution of 4-outcome classifications obtained from all possible combinations of 6-cluster subsamples to the observed classification of the 16-cluster sample, we obtained an exact match in classification in 56% to 85% of instances. We concluded that the 6-cluster C-LQAS provides acceptable classification precision for programmatic action. Considering the greater resources required to implement an expanded C-LQAS, the improvement in precision was deemed insufficient to warrant the effort. Published by Oxford University Press on behalf of the Infectious Diseases Society of America 2014. This work is written by (a) US Government employee(s) and is in the public domain in the US.

  11. Lot quality assurance sampling (LQAS) for monitoring a leprosy elimination program.

    Science.gov (United States)

    Gupte, M D; Narasimhamurthy, B

    1999-06-01

    In a statistical sense, prevalences of leprosy in different geographical areas can be called very low or rare. Conventional survey methods to monitor leprosy control programs, therefore, need large sample sizes, are expensive, and are time-consuming. Further, with the lowering of prevalence to the near-desired target level, 1 case per 10,000 population at national or subnational levels, the program administrator's concern will be shifted to smaller areas, e.g., districts, for assessment and, if needed, for necessary interventions. In this paper, Lot Quality Assurance Sampling (LQAS), a quality control tool in industry, is proposed to identify districts/regions having a prevalence of leprosy at or above a certain target level, e.g., 1 in 10,000. This technique can also be considered for identifying districts/regions at or below the target level of 1 per 10,000, i.e., areas where the elimination level is attained. For simulating various situations and strategies, a hypothetical computerized population of 10 million persons was created. This population mimics the actual population in terms of the empirical information on rural/urban distributions and the distribution of households by size for the state of Tamil Nadu, India. Various levels with respect to leprosy prevalence are created using this population. The distribution of the number of cases in the population was expected to follow the Poisson process, and this was also confirmed by examination. Sample sizes and corresponding critical values were computed using Poisson approximation. Initially, villages/towns are selected from the population and from each selected village/town households are selected using systematic sampling. Households instead of individuals are used as sampling units. This sampling procedure was simulated 1000 times in the computer from the base population. The results in four different prevalence situations meet the required limits of Type I error of 5% and 90% Power. It is concluded that

  12. Identification and quantification of polycarboxylates in detergent products using off-line size exclusion chromatography-nuclear magnetic resonance

    NARCIS (Netherlands)

    Visser, I.; Klinkenberg, M.; Hoos, P.; Janssen, H.-G.; van Duynhoven, J.

    2009-01-01

    The performance of many contemporary detergent products critically depends on polymers. Water-soluble polycarboxylates represent an important class of detergent polymers, and their quantitative assessment in detergent matrices stands as a considerable challenge. The presence of high levels of

  13. Desain Ilustrasi Foto Pada Baju Kaos Dengan Media Fotografi Digital Pendukung Pariwisata Budaya Di Pura Tanah Lot Dan Taman Ayun

    Directory of Open Access Journals (Sweden)

    I Made Saryana

    2018-03-01

    Full Text Available Penelitian ini bertujuan untuk mengembangkan industri kreatif dengan menerapkan fotografi digital melalui pengembangan produk instan dengan desain ilustrasi foto pada baju kaos. Pemilihan Obyek wisata Pura Tanah Lot Tabanan dan Pura Taman Ayun Badung Bali, dijadikan obyek penelitian karena obyek wisata tersebut selalu ramai dikunjungi wisatawan. Pengumpulan data dilakukan dengan observasi, wawancara dan studi pustaka. Data yang diperoleh dari hasil observasi dan wawancara dianalisis dengan menggunakan metode penciptaan seni, sehingga hasil análisis dapat dijadikan pedoman atau konsep dasar dalam pengembangan produk sovenir baju kaos. Penelitian ini dilakukan dengan (1 Mengidentifikasi berbagai jenis sovenir baju kaos yang dijual pada kawasan obyek wisata Tanah Lot Tabanan dan Pura Taman Ayun Badung Bali, baik dari bahan, desain ilustrasinya serta teknik pembuatannya. (2 Menganalisis harga, tingkat penjualan, serta bahan, desain ilustrasinya dan teknik pembuatannya.  (3. Melakukan eksperimen desain ilustrasi foto dengan fotografi digital dan pengolahan melalui komputer. (4 Pembuatan ilustrasi foto dan menerapkannya dengan fotografi dan sablon digital pada baju kaos. This research started with observation of several tourism destinations  in Bali such as Tanah Lot in Tabanan and Taman Ayun Badung. The observation is that by taking pictures of tourists and then selling it on photo printed  paper, profit margins are minimized. Furthermore, selling t-shirts as souvenirs on which the design is lacking in representation of the location show restricted and minimized monetization capabilities. Based on these observations, the researcher intends to conduct research while creating an innovative product which is capable of representing the aforementioned locations. Through implementation of digital photography and patternization modalities, designed photos can instantaneously be printed on the t-shirt, and automatically it may be worn by tourists. This

  14. Determination of the shapes and sizes of the regions in which in hadron-nucleus collisions reactions leading to the nucleon emission, particle production, and fragment evaporation occur

    International Nuclear Information System (INIS)

    Strugalski, Z.

    1985-01-01

    Shapes and sizes of the regions in target-nuclei in which reactions leading to the nucleon emission, particle production and fragment evaporation occur are determined. The region of nucleon emission is of cylindrical shape, with the diameter as large as two nucleon diameters, centered on the incident hadron course. The reactions leading to the particle production happen predominantly along the incident hadron course in nuclear matter. The fragment evaporation goes from the surface layer of the part of the target-nucleus damaged in nucleon emission process

  15. Geographic variation in avian clutch size and nest predation risk along a productivity gradient in South Africa

    Czech Academy of Sciences Publication Activity Database

    Hořák, D.; Sedláček, O.; Tószögyová, A.; Albrecht, Tomáš; Ferenc, M.; Jelínek, V.; Storch, D.

    2011-01-01

    Roč. 82, č. 3 (2011), s. 175-183 ISSN 0030-6525 R&D Projects: GA ČR(CZ) GAP505/11/1617; GA MŠk LC06073 Institutional research plan: CEZ:AV0Z60930519 Keywords : home-range size * Passerine birds * hypothesis * edge * community * forest * sites Subject RIV: EG - Zoology Impact factor: 0.427, year: 2011

  16. Effect of the particle size of maize, rice, and sorghum in extruded diets for dogs on starch gelatinization, digestibility, and the fecal concentration of fermentation products.

    Science.gov (United States)

    Bazolli, R S; Vasconcellos, R S; de-Oliveira, L D; Sá, F C; Pereira, G T; Carciofi, A C

    2015-06-01

    The influence of rice, maize, and sorghum raw material particle size in extruded dry dog food on the digestibility of nutrients and energy and the fecal concentration of fermentation products was investigated. Three diets with similar nutrient compositions were formulated, each with 1 starch source. Before incorporation into diets, the cereals were ground into 3 different particle sizes (approximately 300, 450, and 600 µm); therefore, a total of 9 diets were in a 3 × 3 factorial arrangement (3 cereals and 3 particle sizes). Fifty-four beagle dogs (12.0 ± 0.1 kg BW) were randomly assigned to the diets, with 6 dogs per diet. The digestibility was measured with the chromium oxide method. The data were evaluated with ANOVA considering the carbohydrate source, grinding effect, and interactions. The means were compared with the Tukey test and polynomial contrasts (P 0.05); only GE digestibility was reduced at the largest MGD (P production of feces with less lactate (P dogs fed maize and sorghum foods, an increase in propionate and butyrate concentrations were observed as MGD increased (P dogs fed different particle sizes of the cereal starches in the extruded diets, the digestibility and fecal characteristics were affected, and this effect was ingredient dependent.

  17. Chem-Prep PZT 95/5 for Neutron Generator Applications: Particle Size Distribution Comparison of Development and Production-Scale Powders

    International Nuclear Information System (INIS)

    SIPOLA, DIANA L.; VOIGT, JAMES A.; LOCKWOOD, STEVEN J.; RODMAN-GONZALES, EMILY D.

    2002-01-01

    The Materials Chemistry Department 1846 has developed a lab-scale chem-prep process for the synthesis of PNZT 95/5, a ferroelectric material that is used in neutron generator power supplies. This process (Sandia Process, or SP) has been successfully transferred to and scaled by Department 14192 (Ceramics and Glass Department), (Transferred Sandia Process, or TSP), to meet the future supply needs of Sandia for its neutron generator production responsibilities. In going from the development-size SP batch (1.6 kg/batch) to the production-scale TSP powder batch size (10 kg/batch), it was important that it be determined if the scaling process caused any ''performance-critical'' changes in the PNZT 95/5 being produced. One area where a difference was found was in the particle size distributions of the calcined PNZT powders. Documented in this SAND report are the results of an experimental study to determine the origin of the differences in the particle size distribution of the SP and TSP powders

  18. Synthesis of high efficient Cu/TiO2 photocatalysts by grinding and their size-dependent photocatalytic hydrogen production

    Science.gov (United States)

    Ni, Dawei; Shen, Haiyan; Li, Huiqiao; Ma, Ying; Zhai, Tianyou

    2017-07-01

    Recently, copper species have been extensively investigated to replace Pt as efficient co-catalysts for the evolution of H2 due to their low cost and relatively high activity. Cu nanoparticles less than 5 nm are successfully decorated on TiO2 surface in this work by an easy and mild milling process. These Cu nanoparticles are highly dispersed on TiO2 when the loading amount of Cu is no more than 10 wt%. The sizes of Cu nanoparticles can be controlled by changing the milling environment and decrease in the order of Cu-ethanol > Cu-water > Cu nanoparticles obtained through drying milling. The highest and stable hydrogen generation can be realized on Cu/TiO2 with 2.0 wt% Cu and sizes of Cu nanoparticles ranging from 2 to 4 nm, in which high and stable photocurrent confirms promoted photogenerated charge separation. Smaller Cu clusters are demonstrated to be detrimental to hydrogen evolution at same Cu content. High loading of Cu nanoparticles of 2-4 nm will benefit photogenerated electron-hole recombination and thus decrease the activity of Cu/TiO2. The results here demonstrate the key roles of Cu cluster size in addition to Cu coverage on photocatalytic activity of Cu/TiO2 composite photocatalysts.

  19. Optimal unit sizing of a hybrid renewable energy system for isolated applications; Optimalite des elements d'un systeme decentralise de production d'energie electrique

    Energy Technology Data Exchange (ETDEWEB)

    Morales, D

    2006-07-15

    In general, the methods used to conceive a renewable energy production system overestimate the size of the generating units. These methods increase the investment cost and the production cost of energy. The work presented in this thesis proposes a methodology to optimally size a renewable energy system.- This study shows that the classic approach based only on a long term analysis of system's behaviour is not sufficient and a complementary methodology based on a short term analysis is proposed. A numerical simulation was developed in which the mathematical models of the solar panel, the wind turbines and battery are integrated. The daily average solar energy per m2 is decomposed into a series of hourly I energy values using the Collares-Pereira equations. The time series analysis of the wind speed is made using the Monte Carlo Simulation Method. The second part of this thesis makes a detailed analysis of an isolated wind energy production system. The average energy produced by the system depends on the generator's rated power, the total swept area of the wind turbine, the gearbox's transformation ratio, the battery voltage and the wind speed probability function. The study proposes a methodology to determine the optimal matching between the rated power of the permanent magnet synchronous machine and the wind turbine's rotor size. This is made taking into account the average electrical energy produced over a period of time. (author)

  20. Optimal unit sizing of a hybrid renewable energy system for isolated applications; Optimalite des elements d'un systeme decentralise de production d'energie electrique

    Energy Technology Data Exchange (ETDEWEB)

    Morales, D

    2006-07-15

    In general, the methods used to conceive a renewable energy production system overestimate the size of the generating units. These methods increase the investment cost and the production cost of energy. The work presented in this thesis proposes a methodology to optimally size a renewable energy system.- This study shows that the classic approach based only on a long term analysis of system's behaviour is not sufficient and a complementary methodology based on a short term analysis is proposed. A numerical simulation was developed in which the mathematical models of the solar panel, the wind turbines and battery are integrated. The daily average solar energy per m2 is decomposed into a series of hourly I energy values using the Collares-Pereira equations. The time series analysis of the wind speed is made using the Monte Carlo Simulation Method. The second part of this thesis makes a detailed analysis of an isolated wind energy production system. The average energy produced by the system depends on the generator's rated power, the total swept area of the wind turbine, the gearbox's transformation ratio, the battery voltage and the wind speed probability function. The study proposes a methodology to determine the optimal matching between the rated power of the permanent magnet synchronous machine and the wind turbine's rotor size. This is made taking into account the average electrical energy produced over a period of time. (author)

  1. Parcels and Land Ownership, Square-mile, section-wide, property ownerhip parcel and lot-block boundaries. Includes original platted lot lines. These coverages are maintained interactively by GIS staff. Primary attributes include Parcel IDS (Control, Key, and PIN), platted lot and, Published in 2008, 1:1200 (1in=100ft) scale, Sedgwick County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Parcels and Land Ownership dataset current as of 2008. Square-mile, section-wide, property ownerhip parcel and lot-block boundaries. Includes original platted lot...

  2. STUDY OF PRODUCTIVE PERFORMANCES SPECIFIC TO DAIRY COWS BREEDED IN FARMS OF DIFFERENT SIZES IN BISTRITA NASAUD COUNTY

    Directory of Open Access Journals (Sweden)

    Gheorghe MURESAN

    2013-01-01

    Full Text Available The research were made in farms of various capacities located in Bistrita-Năsăud on an effective by 1029 heads of cows, out of which 100 heads with 370 lactations in holdings with 15-30 heads, 168 heads with 638 lactations in holdings with 31-50 heads, 303 heads with 1068 lactations in holdings with 51-100 heads and 458 heads which produced 1692 lactations in holdings with over 100 heads. From data analysis results that all 15 analyzed holdings, achieved average productions over 4000 kg of milk on normal lactation and 7 holdings accomplished average productions over 5000 kg, with an average productions which varies between 3814 kg and 8668 kg of milk.

  3. Regulatory/Scientific Supports for Micro-, Small-, and Medium-Sized Enterprises (SMEs) With Medicinal Products Provided by the PMDA and EMA.

    Science.gov (United States)

    Kondo, Hideyuki; Shibatsuji, Masayoshi; Yasuda, Naoyuki

    2018-01-01

    Micro-, small-, and medium-sized enterprises (SMEs) have been considered as key players who can bring innovative medicinal products and/or technologies into the field. However, they may need much regulatory/scientific supports to provide their products, technologies, or services to the market in a timely way. Both the Pharmaceuticals and Medical Devices Agency (PMDA) and the European Medicines Agency (EMA), regulatory authorities for medicinal products in Japan and the EU, respectively, have prepared supportive measures for SMEs from the early phase of product/technology development to the postmarketing phase. With respect to supports for SMEs, both agencies have provided similar SME-specific supportive activities, including routine administrative assistance, consultations about product development strategy from an early phase, as well as specific regulatory/scientific issues and fee incentives. In addition, there is a system to register SME status in the EU, which can be a tool for regulators to know how much potential SME-driven activities have and with whom they should communicate to provide necessary supports. Furthermore, as new technologies and novel products from SMEs are not limited to the region where they are developed, close communication about these topics between the PMDA and the EMA will contribute to advancing patients' access to necessary medicinal products.

  4. Ammonia losses and nitrogen partitioning at a southern High Plains open lot dairy

    Science.gov (United States)

    Todd, Richard W.; Cole, N. Andy; Hagevoort, G. Robert; Casey, Kenneth D.; Auvermann, Brent W.

    2015-06-01

    Animal agriculture is a significant source of ammonia (NH3). Cattle excrete most ingested nitrogen (N); most urinary N is converted to NH3, volatilized and lost to the atmosphere. Open lot dairies on the southern High Plains are a growing industry and face environmental challenges as well as reporting requirements for NH3 emissions. We quantified NH3 emissions from the open lot and wastewater lagoons of a commercial New Mexico dairy during a nine-day summer campaign. The 3500-cow dairy consisted of open lot, manure-surfaced corrals (22.5 ha area). Lactating cows comprised 80% of the herd. A flush system using recycled wastewater intermittently removed manure from feeding alleys to three lagoons (1.8 ha area). Open path lasers measured atmospheric NH3 concentration, sonic anemometers characterized turbulence, and inverse dispersion analysis was used to quantify emissions. Ammonia fluxes (15-min) averaged 56 and 37 μg m-2 s-1 at the open lot and lagoons, respectively. Ammonia emission rate averaged 1061 kg d-1 at the open lot and 59 kg d-1 at the lagoons; 95% of NH3 was emitted from the open lot. The per capita emission rate of NH3 was 304 g cow-1 d-1 from the open lot (41% of N intake) and 17 g cow-1 d-1 from lagoons (2% of N intake). Daily N input at the dairy was 2139 kg d-1, with 43, 36, 19 and 2% of the N partitioned to NH3 emission, manure/lagoons, milk, and cows, respectively.

  5. Estimation after classification using lot quality assurance sampling: corrections for curtailed sampling with application to evaluating polio vaccination campaigns.

    Science.gov (United States)

    Olives, Casey; Valadez, Joseph J; Pagano, Marcello

    2014-03-01

    To assess the bias incurred when curtailment of Lot Quality Assurance Sampling (LQAS) is ignored, to present unbiased estimators, to consider the impact of cluster sampling by simulation and to apply our method to published polio immunization data from Nigeria. We present estimators of coverage when using two kinds of curtailed LQAS strategies: semicurtailed and curtailed. We study the proposed estimators with independent and clustered data using three field-tested LQAS designs for assessing polio vaccination coverage, with samples of size 60 and decision rules of 9, 21 and 33, and compare them to biased maximum likelihood estimators. Lastly, we present estimates of polio vaccination coverage from previously published data in 20 local government authorities (LGAs) from five Nigerian states. Simulations illustrate substantial bias if one ignores the curtailed sampling design. Proposed estimators show no bias. Clustering does not affect the bias of these estimators. Across simulations, standard errors show signs of inflation as clustering increases. Neither sampling strategy nor LQAS design influences estimates of polio vaccination coverage in 20 Nigerian LGAs. When coverage is low, semicurtailed LQAS strategies considerably reduces the sample size required to make a decision. Curtailed LQAS designs further reduce the sample size when coverage is high. Results presented dispel the misconception that curtailed LQAS data are unsuitable for estimation. These findings augment the utility of LQAS as a tool for monitoring vaccination efforts by demonstrating that unbiased estimation using curtailed designs is not only possible but these designs also reduce the sample size. © 2014 John Wiley & Sons Ltd.

  6. Maize kernel size and texture: production parameters, quality of eggs of the laying hens and electricity intake

    OpenAIRE

    Javer Alves Vieira Filho; Edivaldo Antônio Garcia; Odivaldo José Seraphim; Elise Saori Floriano Murakami; Andréa Britto Molino; Graciene Conceição dos Santos

    2015-01-01

    The influence of maize corn size and texture on the performance parameters of laying hens and power consumption required for grinding maize corn were evaluated. The experiment was carried out on 384 Isa Brown hens, 36 weeks old, penned in a conventional aviary with 562.5 cm2 bird-1 stocking rate. The treatments were distributed in a completely randomized 2 x 3 factorial design (maize textures: flint and dent; and milling degree: fine, medium and coarse) with eight replicates of eight birds pe...

  7. Unraveling the impact of workforce age diversity on labor productivity : The moderating role of firm size and job security

    NARCIS (Netherlands)

    De Meulenaere, Kim; Boone, Christophe; Buyl, T.P.L.

    Previous literature has suggested both positive and negative effects of age diversity on labor productivity: positive because of the potential knowledge complementarities between employees of different ages and negative because of the age-related value differences that might reduce cohesion and

  8. Lot quality assurance sampling to monitor supplemental immunization activity quality: an essential tool for improving performance in polio endemic countries.

    Science.gov (United States)

    Brown, Alexandra E; Okayasu, Hiromasa; Nzioki, Michael M; Wadood, Mufti Z; Chabot-Couture, Guillaume; Quddus, Arshad; Walker, George; Sutter, Roland W

    2014-11-01

    Monitoring the quality of supplementary immunization activities (SIAs) is a key tool for polio eradication. Regular monitoring data, however, are often unreliable, showing high coverage levels in virtually all areas, including those with ongoing virus circulation. To address this challenge, lot quality assurance sampling (LQAS) was introduced in 2009 as an additional tool to monitor SIA quality. Now used in 8 countries, LQAS provides a number of programmatic benefits: identifying areas of weak coverage quality with statistical reliability, differentiating areas of varying coverage with greater precision, and allowing for trend analysis of campaign quality. LQAS also accommodates changes to survey format, interpretation thresholds, evaluations of sample size, and data collection through mobile phones to improve timeliness of reporting and allow for visualization of campaign quality. LQAS becomes increasingly important to address remaining gaps in SIA quality and help focus resources on high-risk areas to prevent the continued transmission of wild poliovirus. © Crown copyright 2014.

  9. Cluster designs to assess the prevalence of acute malnutrition by lot quality assurance sampling: a validation study by computer simulation.

    Science.gov (United States)

    Olives, Casey; Pagano, Marcello; Deitchler, Megan; Hedt, Bethany L; Egge, Kari; Valadez, Joseph J

    2009-04-01

    Traditional lot quality assurance sampling (LQAS) methods require simple random sampling to guarantee valid results. However, cluster sampling has been proposed to reduce the number of random starting points. This study uses simulations to examine the classification error of two such designs, a 67x3 (67 clusters of three observations) and a 33x6 (33 clusters of six observations) sampling scheme to assess the prevalence of global acute malnutrition (GAM). Further, we explore the use of a 67x3 sequential sampling scheme for LQAS classification of GAM prevalence. Results indicate that, for independent clusters with moderate intracluster correlation for the GAM outcome, the three sampling designs maintain approximate validity for LQAS analysis. Sequential sampling can substantially reduce the average sample size that is required for data collection. The presence of intercluster correlation can impact dramatically the classification error that is associated with LQAS analysis.

  10. Maize kernel size and texture: production parameters, quality of eggs of the laying hens and electricity intake

    Directory of Open Access Journals (Sweden)

    Javer Alves Vieira Filho

    2015-08-01

    Full Text Available The influence of maize corn size and texture on the performance parameters of laying hens and power consumption required for grinding maize corn were evaluated. The experiment was carried out on 384 Isa Brown hens, 36 weeks old, penned in a conventional aviary with 562.5 cm2 bird-1 stocking rate. The treatments were distributed in a completely randomized 2 x 3 factorial design (maize textures: flint and dent; and milling degree: fine, medium and coarse with eight replicates of eight birds per plot. Data were evaluated with SISVAR and means were compared by Tukey’s test at 5% probability. Difference was reported for the variable texture and flint increased the variables feed intake and egg weight. Significant difference in the characteristics of egg quality occurred only for the colorof the yolk. Larger corn sizes consumed less electricity during grinding. The maize flint cultivar had a lower 31.7% power consumption when compared to that of the dent cultivar.

  11. Comparative physical-chemical characterization of encapsulated lipid-based isotretinoin products assessed by particle size distribution and thermal behavior analyses

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes, Carla Aiolfi, E-mail: carlaaiolfi@usp.br [Department of Pharmacy, Faculty of Pharmaceutical Sciences, University of Sao Paulo, Sao Paulo, SP 05508-000 (Brazil); Menaa, Farid [Department of Dermatology, School of Medicine Wuerzburg, Wuerzburg 97080 (Germany); Fluorotronics, Inc., 1425 Russ Bvld, San Diego Technology Incubator, San Diego, CA 92101 (United States); Menaa, Bouzid, E-mail: bouzid.menaa@gmail.com [Fluorotronics, Inc., 1425 Russ Bvld, San Diego Technology Incubator, San Diego, CA 92101 (United States); Quenca-Guillen, Joyce S. [Department of Pharmacy, Faculty of Pharmaceutical Sciences, University of Sao Paulo, Sao Paulo, SP 05508-000 (Brazil); Matos, Jivaldo do Rosario [Department of Fundamental Chemistry, Institute of Chemistry, University of Sao Paulo, Sao Paulo, SP 05508-000 (Brazil); Mercuri, Lucildes Pita [Department of Exact and Earth Sciences, Federal University of Sao Paulo, Diadema, SP 09972-270 (Brazil); Braz, Andre Borges [Department of Engineering of Mines and Oil, Polytechnical School, University of Sao Paulo, SP 05508-900 (Brazil); Rossetti, Fabia Cristina [Department of Pharmaceutical Sciences, Faculty of Pharmaceutical Sciences of Ribeirao Preto, University of Sao Paulo, Ribeirao Preto, SP 14015-120 (Brazil); Kedor-Hackmann, Erika Rosa Maria; Santoro, Maria Ines Rocha Miritello [Department of Pharmacy, Faculty of Pharmaceutical Sciences, University of Sao Paulo, Sao Paulo, SP 05508-000 (Brazil)

    2010-06-10

    Isotretinoin is the drug of choice for the management of severe recalcitrant nodular acne. Nevertheless, some of its physical-chemical properties are still poorly known. Hence, the aim of our study consisted to comparatively evaluate the particle size distribution (PSD) and characterize the thermal behavior of the three encapsulated isotretinoin products in oil suspension (one reference and two generics) commercialized in Brazil. Here, we show that the PSD, estimated by laser diffraction and by polarized light microscopy, differed between the generics and the reference product. However, the thermal behavior of the three products, determined by thermogravimetry (TGA), differential thermal (DTA) analyses and differential scanning calorimetry (DSC), displayed no significant changes and were more thermostable than the isotretinoin standard used as internal control. Thus, our study suggests that PSD analyses in isotretinoin lipid-based formulations should be routinely performed in order to improve their quality and bioavailability.

  12. Deflection test evaluation of different lots of the same nickel-titanium wire commercial brand

    Directory of Open Access Journals (Sweden)

    Murilo Gaby Neves

    2016-02-01

    Full Text Available Introduction: The aim of this in vitro study was to compare the elastic properties of the load-deflection ratio of orthodontic wires of different lot numbers and the same commercial brand. Methods: A total of 40 nickel-titanium (NiTi wire segments (Morelli OrtodontiaTM - Sorocaba, SP, Brazil, 0.016-in in diameter were used. Groups were sorted according to lot numbers (lots 1, 2, 3 and 4. 28-mm length segments from the straight portion (ends of archwires were used. Deflection tests were performed in an EMIC universal testing machine with 5-N load cell at 1 mm/minute speed. Force at deactivation was recorded at 0.5, 1, 2 and 3 mm deflection. Analysis of variance (ANOVA was used to compare differences between group means. Results: When comparing the force of groups at the same deflection (3, 2 and 1 mm, during deactivation, no statistical differences were found. Conclusion: There are no changes in the elastic properties of different lots of the same commercial brand; thus, the use of different lots of the orthodontic wires used in this research does not compromise the final outcomes of the load-deflection ratio.

  13. Deflection test evaluation of different lots of the same nickel-titanium wire commercial brand.

    Science.gov (United States)

    Neves, Murilo Gaby; Lima, Fabrício Viana Pereira; Gurgel, Júlio de Araújo; Pinzan-Vercelino, Célia Regina Maio; Rezende, Fernanda Soares; Brandão, Gustavo Antônio Martins

    2016-01-01

    The aim of this in vitro study was to compare the elastic properties of the load-deflection ratio of orthodontic wires of different lot numbers and the same commercial brand. A total of 40 nickel-titanium (NiTi) wire segments (Morelli Ortodontia™--Sorocaba, SP, Brazil), 0.016-in in diameter were used. Groups were sorted according to lot numbers (lots 1, 2, 3 and 4). 28-mm length segments from the straight portion (ends) of archwires were used. Deflection tests were performed in an EMIC universal testing machine with 5-N load cell at 1 mm/minute speed. Force at deactivation was recorded at 0.5, 1, 2 and 3 mm deflection. Analysis of variance (ANOVA) was used to compare differences between group means. When comparing the force of groups at the same deflection (3, 2 and 1 mm), during deactivation, no statistical differences were found. There are no changes in the elastic properties of different lots of the same commercial brand; thus, the use of different lots of the orthodontic wires used in this research does not compromise the final outcomes of the load-deflection ratio.

  14. Selection of seed lots of Pinus taeda L. for tissue culture

    Directory of Open Access Journals (Sweden)

    Diego Pascoal Golle

    2014-06-01

    Full Text Available The aim of this work was to identify the fungi genera associated with three Pinus taeda L. seed lots and to assess the sanitary and physiological quality of these lots for use as selection criteria for tissue culture and evaluate the in vitro establishment of explants from seminal origin in different nutritive media. It was possible to discriminate the lots on the sanitary and physiological quality, as well as to establish in vitro plants of Pinus taeda from cotyledonary nodes obtained from aseptic seed germination of a selected lot by the sanitary and physiological quality higher. The nutritive media MS, ½ MS and WPM were equally suitable for this purpose. For the sanitary analysis the fungal genera Fusarium, Penicillium and Trichoderma were those of the highest sensitivity. For the physiological evaluation were important the variables: abnormal seedlings, strong normal seedlings; length, fresh and dry weight of strong normal seedlings. The analyzes were favorable to choose lots of seeds for in vitro culture and all culture media were adequate for the establishment of this species in tissue culture.

  15. Energy and system size dependence of phi meson production in Cu plus Cu and Au plus Au collisions

    Czech Academy of Sciences Publication Activity Database

    Abelev, B. I.; Aggarwal, M. M.; Ahammed, Z.; Anderson, B. D.; Arkhipkin, D.; Averichev, G. S.; Balewski, J.; Barannikova, O.; Barnby, L. S.; Baudot, J.; Baumgart, S.; Beavis, D.R.; Bellwied, R.; Benedosso, F.; Betancourt, M.J.; Betts, R. R.; Bhasin, A.; Bhati, A.K.; Bichsel, H.; Bielčík, Jaroslav; Bielčíková, Jana; Biritz, B.; Bland, L.C.; Bombara, M.; Bonner, B. E.; Botje, M.; Bouchet, J.; Braidot, E.; Brandin, A. V.; Bruna, E.; Bueltmann, S.; Burton, T. P.; Bysterský, Michal; Cai, X.Z.; Caines, H.; Sanchez, M.C.D.; Catu, O.; Cebra, D.; Cendejas, R.; Cervantes, M.C.; Chajecki, Z.; Chaloupka, Petr; Chattopadhyay, S.; Chen, H.F.; Chen, J.H.; Cheng, J.; Cherney, M.; Chikanian, A.; Choi, K.E.; Christie, W.; Clarke, R.F.; Codrington, M.J.M.; Corliss, R.; Cormier, T.M.; Coserea, R. M.; Cramer, J. G.; Crawford, H. J.; Das, D.; Dash, S.; Daugherity, M.; De Silva, L.C.; Dedovich, T. G.; DePhillips, M.; Derevschikov, A.A.; de Souza, R.D.; Didenko, L.; Djawotho, P.; Dunlop, J.C.; Mazumdar, M.R.D.; Edwards, W.R.; Efimov, L.G.; Elhalhuli, E.; Elnimr, M.; Emelianov, V.; Engelage, J.; Eppley, G.; Erazmus, B.; Estienne, M.; Eun, L.; Fachini, P.; Fatemi, R.; Fedorisin, J.; Feng, A.; Filip, P.; Finch, E.; Fine, V.; Fisyak, Y.; Gagliardi, C. A.; Gaillard, L.; Ganti, M. S.; Gangaharan, D.R.; Garcia-Solis, E.J.; Geromitsos, A.; Geurts, F.; Ghazikhanian, V.; Ghosh, P.; Gorbunov, Y.N.; Gordon, A.; Grebenyuk, O.; Grosnick, D.; Grube, B.; Guertin, S.M.; Guimaraes, K.S.F.F.; Gupta, A.; Gupta, N.; Guryn, W.; Haag, B.; Hallman, T.J.; Hamed, A.; Harris, J.W.; He, W.; Heinz, M.; Heppelmann, S.; Hippolyte, B.; Hirsch, A.; Hjort, E.; Hoffman, A.M.; Hoffmann, G.W.; Hofman, D.J.; Hollis, R.S.; Huang, H.Z.; Humanic, T.J.; Igo, G.; Iordanova, A.; Jacobs, P.; Jacobs, W.W.; Jakl, Pavel; Jena, C.; Jin, F.; Jones, C.L.; Jones, P.G.; Joseph, J.; Judd, E.G.; Kabana, S.; Kajimoto, K.; Kang, K.; Kapitán, Jan; Keane, D.; Kechechyan, A.; Kettler, D.; Khodyrev, V.Yu.; Kikola, D.P.; Kiryluk, J.; Kisiel, A.; Klein, S.R.; Knospe, A.G.; Kocoloski, A.; Koetke, D.D.; Kopytine, M.; Korsch, W.; Kotchenda, L.; Kushpil, Vasilij; Kravtsov, P.; Kravtsov, V.I.; Krueger, K.; Krus, M.; Kuhn, C.; Kumar, L.; Kurnadi, P.; Lamont, M.A.C.; Landgraf, J.M.; LaPointe, S.; Lauret, J.; Lebedev, A.; Lednický, Richard; Lee, Ch.; Lee, J.H.; Leight, W.; LeVine, M.J.; Li, N.; Li, C.; Li, Y.; Lin, G.; Lindenbaum, S.J.; Lisa, M.A.; Liu, F.; Liu, J.; Liu, L.; Ljubicic, T.; Llope, W.J.; Longacre, R.S.; Love, W.A.; Lu, Y.; Ludlam, T.; Ma, G.L.; Ma, Y.G.; Mahapatra, D.P.; Majka, R.; Mall, O.I.; Mangotra, L.K.; Manweiler, R.; Margetis, S.; Markert, C.; Matis, H.S.; Matulenko, Yu.A.; McShane, T.S.; Meschanin, A.; Milner, R.; Minaev, N.G.; Mioduszewski, S.; Mischke, A.; Mitchell, J.; Mohanty, B.; Morozov, D.A.; Munhoz, M. G.; Nandi, B.K.; Nattrass, C.; Nayak, T. K.; Nelson, J.M.; Netrakanti, P.K.; Ng, M.J.; Nogach, L.V.; Nurushev, S.B.; Odyniec, G.; Ogawa, A.; Okada, H.; Okorokov, V.; Olson, D.; Pachr, M.; Page, B.S.; Pal, S.K.; Pandit, Y.; Panebratsev, Y.; Panitkin, S.Y.; Pawlak, T.; Peitzmann, T.; Perevoztchikov, V.; Perkins, C.; Peryt, W.; Phatak, S.C.; Poljak, N.; Poskanzer, A.M.; Potukuchi, B.V.K.S.; Prindle, D.; Pruneau, C.; Pruthi, N.K.; Putschke, J.; Raniwala, R.; Raniwala, S.; Ray, R.L.; Redwine, R.; Reed, R.; Ridiger, A.; Ritter, H.G.; Roberts, J.B.; Rogachevskiy, O.V.; Romero, J.L.; Rose, A.; Roy, C.; Ruan, L.; Russcher, M.J.; Sahoo, R.; Sakrejda, I.; Sakuma, T.; Salur, S.; Sandweiss, J.; Sarsour, M.; Schambach, J.; Scharenberg, R.P.; Schmitz, N.; Seger, J.; Selyuzhenkov, I.; Seyboth, P.; Shabetai, A.; Shahaliev, E.; Shao, M.; Sharma, M.; Shi, S.S.; Shi, X.H.; Sichtermann, E.P.; Simon, F.; Singaraju, R.N.; Skoby, M.J.; Smirnov, N.; Snellings, R.; Sorensen, P.; Sowinski, J.; Spinka, H.M.; Srivastava, B.; Stadnik, A.; Stanislaus, T.D.S.; Staszak, D.; Strikhanov, M.; Stringfellow, B.; Suaide, A.A.P.; Suarez, M.C.; Subba, N.L.; Šumbera, Michal; Sun, X.M.; Sun, Y.; Sun, Z.; Surrow, B.; Symons, T.J.M.; de Toledo, A. S.; Takahashi, J.; Tang, A.H.; Tang, Z.; Tarnowsky, T.; Thein, D.; Thomas, J.H.; Tian, J.; Timmins, A.R.; Timoshenko, S.; Tokarev, M. V.; Trainor, T.A.; Tram, V.N.; Trattner, A.L.; Trentalange, S.; Tribble, R. E.; Tsai, O.D.; Ulery, J.; Ullrich, T.; Underwood, D.G.; Van Buren, G.; van Leeuwen, M.; Vander Molen, A.M.; Vanfossen, J.A.; Varma, R.; Vasconcelos, G.S.M.; Vasilevski, I.M.; Vasiliev, A. N.; Videbaek, F.; Vigdor, S.E.; Viyogi, Y. P.; Vokal, S.; Voloshin, S.A.; Wada, M.; Walker, M.; Wang, F.; Wang, G.; Wang, J.S.; Wang, Q.; Wang, X.; Wang, X.L.; Wang, Y.; Webb, G.; Webb, J.C.; Westfall, G.D.; Whitten, C.; Wieman, H.; Wissink, S.W.; Witt, R.; Wu, Y.; Tlustý, David; Xie, W.; Xu, N.; Xu, Q.H.; Xu, Y.; Xu, Z.; Yang, P.; Yepes, P.; Yip, K.; Yoo, I.K.; Yue, Q.; Zawisza, M.; Zbroszczyk, H.; Zhan, W.; Zhang, S.; Zhang, W.M.; Zhang, X.P.; Zhang, Y.; Zhang, Z.; Zhao, Y.; Zhong, C.; Zhou, J.; Zoulkarneev, R.; Zoulkarneeva, Y.; Zuo, J.X.

    2009-01-01

    Roč. 673, č. 3 (2009), s. 183-191 ISSN 0370-2693 R&D Projects: GA ČR GA202/07/0079; GA MŠk LC07048 Institutional research plan: CEZ:AV0Z10480505; CEZ:AV0Z10100502 Keywords : particle production * strangeness enhancement * canonical suppression Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 5.083, year: 2009

  16. Center of mass energy and system-size dependence of photon production at forward rapidity at RHIC

    Czech Academy of Sciences Publication Activity Database

    Abelev, B. I.; Aggarwal, M. M.; Ahammed, Z.; Alakhverdyants, A. V.; Anderson, B.D.; Arkhipkin, D.; Averichev, G. S.; Badyal, S. K.; Balewski, J.; Barannikova, O.; Barnby, L. S.; Baudot, J.; Baumgart, S.; Beavis, D.R.; Bellwied, R.; Benedosso, F.; Betancourt, M.J.; Betts, R. R.; Bhasin, A.; Bhati, A.K.; Bichsel, H.; Bielčík, Jaroslav; Bielčíková, Jana; Biritz, B.; Bland, L.C.; Bnzarov, I.; Bombara, M.; Bonner, B.E.; Bouchet, J.; Braidot, E.; Brandin, A.V.; Bruna, E.; Bueltmann, S.; Burton, T.P.; Bysterský, Michal; Cai, X.Z.; Caines, H.; Calderon, M.; Catu, O.; Cebra, D.; Cendejas, R.; Cervantes, M.C.; Chajecki, Z.; Chaloupka, Petr; Chattopadhyay, S.; Chen, H.F.; Chen, J.H.; Chen, J.Y.; Cheng, J.; Cherney, M.; Chikanian, A.; Choi, K.E.; Christie, W.; Clarke, R.F.; Codrington, M.J.M.; Corliss, R.; Cormier, T.M.; Cosentino, M.R.; Cramer, J. G.; Crawford, H. J.; Das, D.; Das, S.; Dash, S.; Daugherity, M.; De Silva, L.C.; Dedovich, T. G.; DePhillips, M.; Derevschikov, A.A.; de Souza, R.D.; Didenko, L.; Djawotho, P.; Dogra, S.M.; Dong, X.; Drachenberg, J.L.; Draper, J. E.; Dunlop, J.C.; Mazumdar, M.R.D.; Efimov, L.G.; Elhalhuli, E.; Elnimr, M.; Engelage, J.; Eppley, G.; Erazmus, B.; Estienne, M.; Eun, L. (ed.); Fachini, P.; Fatemi, R.; Fedorisin, J.; Feng, A.; Filip, P.; Finch, E.; Fine, V.; Fisyak, Y.; Gagliardi, C. A.; Gaillard, L.; Gangaharan, D.R.; Ganti, M.S.; Garcia-Solis, E.J.; Geromitsos, A.; Geurts, F.; Ghazikhanian, V.; Ghosh, P.; Gorbunov, Y.N.; Gordon, A.; Grebenyuk, O.; Grosnick, D.; Grube, B.; Guertin, S.M.; Guimaraes, K.S.F.F.; Gupta, A.; Gupta, N.; Guryn, W.; Haag, B.; Hallman, T.J.; Hamed, A.; Harris, J.W.; He, W.; Heinz, M.; Hepplemann, S.; Hippolyte, B.; Hirsch, A.; Hjort, E.; Hoffman, A.M.; Hoffmann, G.W.; Hofman, D.J.; Hollis, R.S.; Huang, H.Z.; Humanic, T.J.; Huo, L.; Igo, G.; Lordanova, A.; Jacobs, P.; Jacobs, W.W.; Jakl, Pavel; Jena, C.; Jin, F.; Jones, C.L.; Jones, P.G.; Joseph, J.; Judd, E.G.; Kabana, S.; Kajimoto, K.; Kang, K.; Kapitán, Jan; Kauder, K.; Keane, D.; Kechechyan, A.; Kettler, D.; Khodyrev, V.Yu.; Kikola, D.P.; Kiryluk, J.; Kisiel, A.; Klein, S.R.; Knospe, A.G.; Kocoloski, A.; Koetke, D.D.; Konzer, J.; Kopytine, M.; Koralt, I.; Korsch, W.; Kotchenda, L.; Kushpil, Vasilij; Kravtsov, P.; Kravtsov, V.I.; Krueger, K.; Krus, M.; Kuhn, C.; Kumar, L.; Kurnadi, P.; Lamont, M.A.C.; Landgraf, J.M.; LaPointe, S.; Lauret, J.; Lebedev, A.; Lednický, Richard; Lee, Ch.; Lee, J.H.; Leight, W.; LeVine, M.J.; Li, C.; Li, N.; Li, Y.; Lin, G.; Lindenbaum, S.J.; Lisa, M.A.; Liu, F.; Liu, H.; Liu, J.; Liu, L.; Ljubicic, T.; Llope, W.J.; Longacre, R.S.; Love, W.A.; Lu, Y.; Ludlam, T.; Ma, G.L.; Ma, Y.G.; Mahapatra, D.P.; Majka, R.; Mall, O.I.; Mangotra, L.K.; Manweiler, R.; Margetis, S.; Markert, C.; Masui, H.; Matis, H.S.; Matulenko, Yu.A.; McDonald, D.; McShane, T.S.; Meschanin, A.; Millner, R.; Minaev, N.G.; Mioduszewski, S.; Mischke, A.; Mohanty, B.; Mondal, M.M.; Morozov, D.A.; Munhoz, M. G.; Nandi, B.K.; Nattrass, C.; Nayak, T. K.; Nelson, J.M.; Netrakanti, P.K.; Ng, M.J.; Nogach, L.V.; Nurushev, S.B.; Odyniec, G.; Ogawa, A.; Okada, H.; Okorokov, V.; Olson, D.; Pachr, M.; Page, B.S.; Pal, S.K.; Pandit, Y.; Panebratsev, Y.; Pawlak, T.; Peitzmann, T.; Perevoztchikov, V.; Perkins, C.; Peryt, W.; Phatak, S.C.; Pile, P.; Planinic, M.; Ploskon, M.A.; Pluta, J.; Plyku, D.; Poljak, N.; Poskanzer, A.M.; Potukuchi, B.V.K.S.; Prindle, D.; Pruneau, C.; Pruthi, N.K.; Pujahari, P.R.; Putschke, J.; Raniwala, R.; Raniwala, S.; Ray, R.L.; Redwine, R.; Reed, R.; Ridiger, A.; Ritter, H.G.; Roberts, J.B.; Rogachevskiy, O.V.; Romero, J.L.; Rose, A.; Roy, C.; Ruan, L.; Russcher, M.J.; Sahoo, R.; Sakai, S.; Sakrejda, I.; Sakuma, T.; Salur, S.; Sandweiss, J.; Sarsour, M.; Schambach, J.; Scharenberg, R.P.; Schmitz, N.; Seger, J.; Selyuzhenkov, I.; Seyboth, P.; Shabetai, A.; Shahaliev, E.; Shao, M.; Sharma, M.; Shi, S.S.; Shi, X.H.; Sichtermann, E.P.; Simon, F.; Singaraju, R.N.; Skoby, M.J.; Smirnov, N.; Sorensen, P.; Sowinski, J.; Spinka, H.M.; Srivastava, B.; Stanislaus, T.D.S.; Staszak, D.; Strikhanov, M.; Stringfellow, B.; Suaide, A.A.P.; Suarez, M.C.; Subba, N.L.; Šumbera, Michal; Sun, X.M.; Sun, Y.; Sun, Z.; Surrow, B.; Symons, T.J.M.; de Toledo, A. S.; Takahashi, J.; Tang, A.H.; Tang, Z.; Tarini, L.H.; Tarnowsky, T.; Thein, D.; Thomas, J.H.; Tian, J.; Timmins, A.R.; Timoshenko, S.; Tlustý, David; Tokarev, M. V.; Trainor, T.A.; Tram, V.N.; Trattner, A.L.; Trentalange, S.; Tribble, R. E.; Tsai, O.D.; Ulery, J.; Ullrich, T.; Underwood, D.G.; Van Buren, G.; van Leeuwen, M.; van Nieuwenhuizen, G.; Vanfossen, J.A.; Varma, R.; Vasconcelos, G.M.S.; Vasiliev, A. N.; Videbaek, F.; Vigdor, S.E.; Viyogi, Y. P.; Vokal, S.; Voloshin, S.A.; Wada, M.; Walker, M.; Wang, F.; Wang, G.; Wang, H.; Wang, J.S.; Wang, Q.; Wang, X.; Wang, X.L.; Wang, Y.; Webb, G.; Westfall, G.D.; Whitten, C.; Wieman, H.; Wissink, S.W.; Witt, R.; Wu, Y.; Xie, W.; Xu, N.; Xu, Q.H.; Xu, Y.; Xu, Z.; Yang, Y.; Yepes, P.; Yip, K.; Yoo, K.-Y.; Yue, Q.; Zawisza, M.; Zbroszczyk, H.; Zhan, W.; Zhang, S.; Zhang, W.M.; Zhang, X.P.; Zhang, Y.; Zhang, Z.P.; Zhao, Y.; Zhong, C.; Zhou, J.; Zhu, X.; Zoulkarneev, R.; Zoulkarneeva, Y.; Zuo, J.X.

    2010-01-01

    Roč. 832, 1-2 (2010), s. 134-147 ISSN 0375-9474 R&D Projects: GA ČR GA202/07/0079; GA MŠk LA09013 Institutional research plan: CEZ:AV0Z10480505; CEZ:AV0Z10100502 Keywords : particle production * photons * forward rapidity Subject RIV: BG - Nuclear, Atomic and Molecular Physics, Colliders Impact factor: 1.986, year: 2010

  17. Effects of particle size of processed barley grain, enzyme addition and microwave treatment on in vitro disappearance and gas production for feedlot cattle.

    Science.gov (United States)

    Tagawa, Shin-Ichi; Holtshausen, Lucia; McAllister, Tim A; Yang, Wen Zhu; Beauchemin, Karen Ann

    2017-04-01

    The effects of particle size of processed barley grain, enzyme addition and microwave treatment on in vitro dry matter (DM) disappearance (DMD), gas production and fermentation pH were investigated for feedlot cattle. Rumen fluid from four fistulated feedlot cattle fed a diet of 860 dry-rolled barley grain, 90 maize silage and 50 supplement g/kg DM was used as inoculum in 3 batch culture in vitro studies. In Experiment 1, dry-rolled barley and barley ground through a 1-, 2-, or 4-mm screen were used to obtain four substrates differing in particle size. In Experiment 2, cellulase enzyme (ENZ) from Acremonium cellulolyticus Y-94 was added to dry-rolled and ground barley (2-mm) at 0, 0.1, 0.5, 1, and 2 mg/g, while Experiment 3 examined the interactions between microwaving (0, 30, and 60 s microwaving) and ENZ addition (0, 1, and 2 mg/g) using dry-rolled barley and 2-mm ground barley. In Experiment 1, decreasing particle size increased DMD and gas production, and decreased fermentation pH (pgas production and decreased (pgas production, and decreased (p<0.05) fermentation pH of dry-rolled barley, but not ground barley. We conclude that cellulase enzymes can be used to increase the rumen disappearance of barley grain when it is coarsely processed as in the case of dry-rolled barley. However, microwaving of barley grain offered no further improvements in ruminal fermentation of barley grain.

  18. Sample-size effects in fast-neutron gamma-ray production measurements: solid-cylinder samples

    International Nuclear Information System (INIS)

    Smith, D.L.

    1975-09-01

    The effects of geometry, absorption and multiple scattering in (n,Xγ) reaction measurements with solid-cylinder samples are investigated. Both analytical and Monte-Carlo methods are employed in the analysis. Geometric effects are shown to be relatively insignificant except in definition of the scattering angles. However, absorption and multiple-scattering effects are quite important; accurate microscopic differential cross sections can be extracted from experimental data only after a careful determination of corrections for these processes. The results of measurements performed using several natural iron samples (covering a wide range of sizes) confirm validity of the correction procedures described herein. It is concluded that these procedures are reliable whenever sufficiently accurate neutron and photon cross section and angular distribution information is available for the analysis. (13 figures, 5 tables) (auth)

  19. Ectopic expression of human mTOR increases viability, robustness, cell size, proliferation, and antibody production of chinese hamster ovary cells.

    Science.gov (United States)

    Dreesen, Imke A J; Fussenegger, Martin

    2011-04-01

    Engineering of mammalian production cell lines to improve titer and quality of biopharmaceuticals is a top priority of the biopharmaceutical manufacturing industry providing protein therapeutics to patients worldwide. While many engineering strategies have been successful in the past decade they were often based on the over-expression of a single transgene and therefore limited to addressing a single bottleneck in the cell's production capacity. We provide evidence that ectopic expression of the global metabolic sensor and processing protein mammalian target of rapamycin (mTOR), simultaneously improves key bioprocess-relevant characteristics of Chinese hamster ovary (CHO) cell-derived production cell lines such as cell growth (increased cell size and protein content), proliferation (increased cell-cycle progression), viability (decreased apoptosis), robustness (decreased sensitivity to sub-optimal growth factor and oxygen supplies) and specific productivity of secreted human glycoproteins. Cultivation of mTOR-transgenic CHO-derived cell lines engineered for secretion of a therapeutic IgG resulted in antibody titers of up to 50 pg/cell/day, which represents a four-fold increase compared to the parental production cell line. mTOR-based engineering of mammalian production cell lines may therefore have a promising future in biopharmaceutical manufacturing of human therapeutic proteins. Copyright © 2010 Wiley Periodicals, Inc.

  20. The Impact of Field Size on the Environment and Energy Crop Production Efficiency for a Sustainable Indigenous Bioenergy Supply Chain in the Republic of Ireland

    Directory of Open Access Journals (Sweden)

    Rory Deverell

    2009-11-01

    Full Text Available This paper investigates, using the GIS platform, the potential impacts of meeting national bioenergy targets using only indigenous sources of feedstock on the habitats and carbon stores that exist within Ireland’s field boundaries. A survey of the Republic of Irelands field was conducted in order to estimate and map the size and geographic distribution of the Republic of Ireland’s field boundaries. The planting and harvesting costs associated with possible bioenergy crop production systems were determined using the relationship between the seasonal operating efficiency and the average field size. The results indicate that Ireland will need a large proportion of its current agricultural area (at least 16.5% in order to its meet national bioenergy targets by 2020. The demand cannot be met by the current area that both has suitable soil type for growing the bioenergy crops and is large enough for the required operating efficiency. The results of this study indicate that implementing and meeting national bioenergy targets using only indigenous feedstock will likely impact the country’s field boundary resources negatively, as crop producers seek to improve production efficiency through field consolidation and field boundary removal. It was found that such boundary removal results in a loss of up to 6 tC/km2 and 0.7 ha/km of previously permanent habitat where average field size is small. The impact of field consolidation on these resources reduces substantially as larger fields become consolidated.

  1. Neuro-ophthalmology of late-onset Tay-Sachs disease (LOTS).

    Science.gov (United States)

    Rucker, J C; Shapiro, B E; Han, Y H; Kumar, A N; Garbutt, S; Keller, E L; Leigh, R J

    2004-11-23

    Late-onset Tay-Sachs disease (LOTS) is an adult-onset, autosomal recessive, progressive variant of GM2 gangliosidosis, characterized by involvement of the cerebellum and anterior horn cells. To determine the range of visual and ocular motor abnormalities in LOTS, as a prelude to evaluating the effectiveness of novel therapies. Fourteen patients with biochemically confirmed LOTS (8 men; age range 24 to 53 years; disease duration 5 to 30 years) and 10 age-matched control subjects were studied. Snellen visual acuity, contrast sensitivity, color vision, stereopsis, and visual fields were measured, and optic fundi were photographed. Horizontal and vertical eye movements (search coil) were recorded, and saccades, pursuit, vestibulo-ocular reflex (VOR), vergence, and optokinetic (OK) responses were measured. All patients showed normal visual functions and optic fundi. The main eye movement abnormality concerned saccades, which were "multistep," consisting of a series of small saccades and larger movements that showed transient decelerations. Larger saccades ended earlier and more abruptly (greater peak deceleration) in LOTS patients than in control subjects; these changes can be attributed to premature termination of the saccadic pulse. Smooth-pursuit and slow-phase OK gains were reduced, but VOR, vergence, and gaze holding were normal. Patients with late-onset Tay-Sachs disease (LOTS) show characteristic abnormalities of saccades but normal afferent visual systems. Hypometria, transient decelerations, and premature termination of saccades suggest disruption of a "latch circuit" that normally inhibits pontine omnipause neurons, permitting burst neurons to discharge until the eye movement is completed. These measurable abnormalities of saccades provide a means to evaluate the effects of novel treatments for LOTS.

  2. The distribution feature of size-fractionated chlorophyll a and primary productivity in Prydz Bay and its north sea area during the austral summer

    Institute of Scientific and Technical Information of China (English)

    刘子琳; 陈忠元

    2003-01-01

    The investigation of size-fractionated chlorophyll a and primary productivity were carried out in three longitudinal sections (63°-69°12′S, 70°30′E, 73°E and 75(30′E) at December 18 -26, 1998 and January 12 -18, 1999 in Prydz Bay and its north sea area, Antarctica. The results showed that surface chlorophyll a concentration were 0.16 - 3.99 μg dm -3. The high values of chlorophyll a concentration ( more than 3.5 μg dm -3 ) were in Prydz Bay and in the west Ladies Bank. The average chlorophyll a concentration at sub-surface layer was higher than that at surface layer; its concentration at the deeper layers of 50 m decreased with increasing depth and that at 200 m depth was only 0.01 -0.95 μg dm-3. The results of size-fractionated chlorophyll a showed that the contribution of the netplanktion to total chlorophyll a was 56% , those of the nanoplankton and the picoplankton were 24% and 20% respectively in the surveyed area. The potential primary productivity at the euphotic zone in the surveyed area was 0. 11 - 11.67 mgC m-3 h -1 and average value was 2.00 ±2.80 mgC m-3h-1. The in-situ productivity in the bay and the continental shelf was higher and that in the deep-sea area was lower. The assimilation number of ted primary productivity show that the contribution of the netplanktion to total productivity was 58% , those of the nanoplankton and the picoplankton were 26% and 16% respectively. The cell abundance of phytoplankton was 1. 6 + 103 - 164. 8 + 103 cell dm-3 in the surface water.

  3. Mating System and Effective Population Size of the Overexploited Neotropical Tree (Myroxylon peruiferum L.f.) and Their Impact on Seedling Production.

    Science.gov (United States)

    Silvestre, Ellida de Aguiar; Schwarcz, Kaiser Dias; Grando, Carolina; de Campos, Jaqueline Bueno; Sujii, Patricia Sanae; Tambarussi, Evandro Vagner; Macrini, Camila Menezes Trindade; Pinheiro, José Baldin; Brancalion, Pedro Henrique Santin; Zucchi, Maria Imaculada

    2018-03-16

    The reproductive system of a tree species has substantial impact on genetic diversity and structure within and among natural populations. Such information, should be considered when planning tree planting for forest restoration. Here, we describe the mating system and genetic diversity of an overexploited Neotropical tree, Myroxylon peruiferum L.f. (Fabaceae) sampled from a forest remnant (10 seed trees and 200 seeds) and assess whether the effective population size of nursery-grown seedlings (148 seedlings) is sufficient to prevent inbreeding depression in reintroduced populations. Genetic analyses were performed based on 8 microsatellite loci. M. peruiferum presented a mixed mating system with evidence of biparental inbreeding (t^m-t^s = 0.118). We found low levels of genetic diversity for M. peruiferum species (allelic richness: 1.40 to 4.82; expected heterozygosity: 0.29 to 0.52). Based on Ne(v) within progeny, we suggest a sample size of 47 seed trees to achieve an effective population size of 100. The effective population sizes for the nursery-grown seedlings were much smaller Ne = 27.54-34.86) than that recommended for short term Ne ≥ 100) population conservation. Therefore, to obtain a reasonable genetic representation of native tree species and prevent problems associated with inbreeding depression, seedling production for restoration purposes may require a much larger sampling effort than is currently used, a problem that is further complicated by species with a mixed mating system. This study emphasizes the need to integrate species reproductive biology into seedling production programs and connect conservation genetics with ecological restoration.

  4. AD620SQ/883B Total Ionizing Dose Radiation Lot Acceptance Report for RESTORE-LEO

    Science.gov (United States)

    Burton, Noah; Campola, Michael

    2017-01-01

    A Radiation Lot Acceptance Test was performed on the AD620SQ/883B, Lot 1708D, in accordance with MIL-STD-883, Method 1019, Condition D. Using a Co-60 source 4 biased parts and 4 unbiased parts were irradiated at 10 mrad/s (0.036 krad/hr) in intervals of approximately 1 krad from 3-10 krads, and ones of 5 krads from 10-25 krads, where it was annealed while unbiased at 25 degrees Celsius, for 2 days, and then, subsequently, annealed while biased at 25 degrees celsius, for another 7 days.

  5. Analysis of portfolio optimization with lot of stocks amount constraint: case study index LQ45

    Science.gov (United States)

    Chin, Liem; Chendra, Erwinna; Sukmana, Agus

    2018-01-01

    To form an optimum portfolio (in the sense of minimizing risk and / or maximizing return), the commonly used model is the mean-variance model of Markowitz. However, there is no amount of lots of stocks constraint. And, retail investors in Indonesia cannot do short selling. So, in this study we will develop an existing model by adding an amount of lot of stocks and short-selling constraints to get the minimum risk of portfolio with and without any target return. We will analyse the stocks listed in the LQ45 index based on the stock market capitalization. To perform this analysis, we will use Solver that available in Microsoft Excel.

  6. Sizing inventory of blood products in a blood bank at Brazil based on a model of inventory management and a demand forecast

    Directory of Open Access Journals (Sweden)

    Julia Lorena Marques Gurgel

    2014-02-01

    Full Text Available The management of the stocks of products derived from the blood processing collected in blood banks is a problem for health services in Brazil and the world. Quantify the stocks of these products in order to equalize the demand and supply is not a simple task. It's necessary ensure that the product is available when needed and in due time. However, there is no how overestimate these stocks given that the product is perishable and it is not easy the availability of raw material (blood for processing. There are few studies in Brazil, however, that discuss this issue. This study will focus on one Brazilian Hemocentro, which has faced the challenge of measure the demand for haemotherapic's products and establish parameters to control their stocks. Thus, it was sought to adapt a recent study realized out of the country, about sizing of stocks of a inventory for blood banks, combined with a forecast model of demand for blood derivatives subclassified by blood type. This control aims to increase the availability of the transfusion service, as it intends to reduce shortages and wastage of the blood collected.

  7. Individual and interacting effects of pCO2 and temperature on Emiliania huxleyi calcification: study of the calcite production, the coccolith morphology and the coccosphere size

    Directory of Open Access Journals (Sweden)

    K. Sabbe

    2010-05-01

    Full Text Available The impact of ocean acidification and increased water temperature on marine ecosystems, in particular those involving calcifying organisms, has been gradually recognised. We examined the individual and combined effects of increased pCO2 (180 ppmV CO2, 380 ppmV CO2 and 750 ppmV CO2 corresponding to past, present and future CO2 conditions, respectively and temperature (13 °C and 18 °C during the exponential growth phase of the coccolithophore E. huxleyi using batch culture experiments. We showed that cellular production rate of Particulate Organic Carbon (POC increased from the present to the future CO2 treatments at 13 °C. A significant effect of pCO2 and of temperature on calcification was found, manifesting itself in a lower cellular production rate of Particulate Inorganic Carbon (PIC as well as a lower PIC:POC ratio at future CO2 levels and at 18 °C. Coccosphere-sized particles showed a size reduction with both increasing temperature and CO2 concentration. The influence of the different treatments on coccolith morphology was studied by categorizing SEM coccolith micrographs. The number of well-formed coccoliths decreased with increasing pCO2 while temperature did not have a significant impact on coccolith morphology. No interacting effects of pCO2 and temperature were observed on calcite production, coccolith morphology or on coccosphere size. Finally, our results suggest that ocean acidification might have a larger adverse impact on coccolithophorid calcification than surface water warming.

  8. Size effects in winding roll formed profiles: A study of carcass production for flexible pipes in offshore industry

    DEFF Research Database (Denmark)

    Nielsen, Peter Søe; Nielsen, Morten Storgaard; Bay, Niels

    2013-01-01

    neutral plane. Other parameters such as profile entry angle on the mandrel and spiral pitch are likely to have significant importance. Proper dividing point position is shown to be obtainable by adjusting the profile in the roll forming stage. The profile rolling is successfully modeled by Finite Element......Carcass production of flexible offshore oil and gas pipes implies winding and interlocking of a roll formed stainless steel profile around a mandrel in a spiral shape. The location of the dividing point between the left and right half of the s-shaped profile in the finished carcass is very...... Analysis (FEA), whereas a simplified FE-model of the subsequent winding operation shows that full interlock modeling is required for proper prediction of profile deformation. © (2013) Trans Tech Publications....

  9. Heterogeneous oxidation of saturated organic aerosols by hydroxyl radicals: uptake kinetics, condensed-phase products, and particle size change

    Directory of Open Access Journals (Sweden)

    I. J. George

    2007-08-01

    Full Text Available The kinetics and reaction mechanism for the heterogeneous oxidation of saturated organic aerosols by gas-phase OH radicals were investigated under NOx-free conditions. The reaction of 150 nm diameter Bis(2-ethylhexyl sebacate (BES particles with OH was studied as a proxy for chemical aging of atmospheric aerosols containing saturated organic matter. An aerosol reactor flow tube combined with an Aerodyne time-of-flight aerosol mass spectrometer (ToF-AMS and scanning mobility particle sizer (SMPS was used to study this system. Hydroxyl radicals were produced by 254 nm photolysis of O3 in the presence of water vapour. The kinetics of the heterogeneous oxidation of the BES particles was studied by monitoring the loss of a mass fragment of BES with the ToF-AMS as a function of OH exposure. We measured an initial OH uptake coefficient of γ0=1.3 (±0.4, confirming that this reaction is highly efficient. The density of BES particles increased by up to 20% of the original BES particle density at the highest OH exposure studied, consistent with the particle becoming more oxidized. Electrospray ionization mass spectrometry analysis showed that the major particle-phase reaction products are multifunctional carbonyls and alcohols with higher molecular weights than the starting material. Volatilization of oxidation products accounted for a maximum of 17% decrease of the particle volume at the highest OH exposure studied. Tropospheric organic aerosols will become more oxidized from heterogeneous photochemical oxidation, which may affect not only their physical and chemical properties, but also their hygroscopicity and cloud nucleation activity.

  10. Thermo-hydro-geochemical modelling of the bentonite buffer. LOT A2 experiment

    Energy Technology Data Exchange (ETDEWEB)

    Sena, Clara; Salas, Joaquin; Arcos, David (Amphos 21 Consulting S.L., Barcelona (Spain))

    2010-12-15

    The Swedish Nuclear Fuel and waste management company (SKB) is conducting a series of long term buffer material (LOT) tests at the Aespoe Hard Rock Laboratory (HRL) to test the behaviour of the bentonite buffer under conditions similar to those expected in a KBS-3 deep geological repository for high level nuclear waste (HLNW). In the present work a numerical model is developed to simulate (i) the thermo-hydraulic, (ii) transport and (iii) geochemical processes that have been observed in the LOT A2 test parcel. The LOT A2 test lasted approximately 6 years, and consists of a 4 m long vertical borehole drilled in diorite rock, from the ground of the Aespoe HRL tunnel. The borehole is composed of a central heater, maintained at 130 deg C in the lower 2 m of the borehole, a copper tube surrounding the heater and a 100 mm thick ring of pre-compacted Wyoming MX-80 bentonite around the copper tube /Karnland et al. 2009/. The numerical model developed here is a 1D axis-symmetric model that simulates the water saturation of the bentonite under a constant thermal gradient; the transport of solutes; and, the geochemical reactions observed in the bentonite blocks. Two cases have been modelled, one considering the highest temperature reached by the bentonite (at 3 m depth in the borehole, where temperatures of 130 and 85 deg C have been recorded near the copper tube and near the granitic host rock, respectively) and the other case assuming a constant temperature of 25 deg C, representing the upper part of borehole, where the bentonite has not been heated. In the LOT A2 test, the initial partially saturated bentonite becomes progressively water saturated, due to the injection of Aespoe granitic groundwater at granite - bentonite interface. The transport of solutes during the bentonite water saturation stage is believed to be controlled by water uptake from the surrounding groundwater to the wetting front and, additionally, in the case of heated bentonite, by a cyclic evaporation

  11. Thermo-hydro-geochemical modelling of the bentonite buffer. LOT A2 experiment

    International Nuclear Information System (INIS)

    Sena, Clara; Salas, Joaquin; Arcos, David

    2010-12-01

    The Swedish Nuclear Fuel and waste management company (SKB) is conducting a series of long term buffer material (LOT) tests at the Aespoe Hard Rock Laboratory (HRL) to test the behaviour of the bentonite buffer under conditions similar to those expected in a KBS-3 deep geological repository for high level nuclear waste (HLNW). In the present work a numerical model is developed to simulate (i) the thermo-hydraulic, (ii) transport and (iii) geochemical processes that have been observed in the LOT A2 test parcel. The LOT A2 test lasted approximately 6 years, and consists of a 4 m long vertical borehole drilled in diorite rock, from the ground of the Aespoe HRL tunnel. The borehole is composed of a central heater, maintained at 130 deg C in the lower 2 m of the borehole, a copper tube surrounding the heater and a 100 mm thick ring of pre-compacted Wyoming MX-80 bentonite around the copper tube /Karnland et al. 2009/. The numerical model developed here is a 1D axis-symmetric model that simulates the water saturation of the bentonite under a constant thermal gradient; the transport of solutes; and, the geochemical reactions observed in the bentonite blocks. Two cases have been modelled, one considering the highest temperature reached by the bentonite (at 3 m depth in the borehole, where temperatures of 130 and 85 deg C have been recorded near the copper tube and near the granitic host rock, respectively) and the other case assuming a constant temperature of 25 deg C, representing the upper part of borehole, where the bentonite has not been heated. In the LOT A2 test, the initial partially saturated bentonite becomes progressively water saturated, due to the injection of Aespoe granitic groundwater at granite - bentonite interface. The transport of solutes during the bentonite water saturation stage is believed to be controlled by water uptake from the surrounding groundwater to the wetting front and, additionally, in the case of heated bentonite, by a cyclic evaporation

  12. Choosing between rocks, hard places and a lot more. The economic interface

    International Nuclear Information System (INIS)

    Haldorsen, H.H.

    1996-01-01

    The most central aspects of the oil and gas business are exploration (is there oil or gas?), production (market?, infrastructure?, how fast can we produce, and how much can we recover?), licence and tax regulations (acceptable and stable?, incentive systems?), safety, health and environmental concerns, and the future oil price (will the oil business remain an attractive business-segment to invest in, will we obtain a satisfactory return on the capital employed?). Exploration is in many ways retrospective; a real understanding of how geological formations and fluids within basins were formed and modified is a prerequisite for success. Production and oil price forecasting are intensely quantitative and prospective (forward-looking). The main application of economic analysis in the oil business is to arrive at economic indicators for proposed future activities (given a set of assumptions and estimates) and to determine the effect a certain investment will have on the company's financial position. As a future oil business venture is never deterministic (in terms of geological and/or financial outcomes) and since several courses of action are possible given the information at hand, project economics may be computed for a range of assumptions (input data) and for several alternative scenarios, where each scenario and/or assumption may additionally be assigned a probability. In this manner, the expected economic outcome may be computed along with downside and upside estimates. Also, project economics play a decisive role when a number of alternatives are competing for implementation; bases on technical-economic optimization studies, we select the optimum development concept, the optimum number of wells, the optimum fluid handling capacities, etc. with due consideration of subsurface and other relevant uncertainties. The economic optimum is chosen based on comparative analyses. This paper will demonstrate that the 'economic interface' is essential for most oil business

  13. Safety, immunogenicity, and lot-to-lot consistency of a quadrivalent inactivated influenza vaccine in children, adolescents, and adults: A randomized, controlled, phase III trial.

    Science.gov (United States)

    Cadorna-Carlos, Josefina B; Nolan, Terry; Borja-Tabora, Charissa Fay; Santos, Jaime; Montalban, M Cecilia; de Looze, Ferdinandus J; Eizenberg, Peter; Hall, Stephen; Dupuy, Martin; Hutagalung, Yanee; Pépin, Stéphanie; Saville, Melanie

    2015-05-15

    Inactivated quadrivalent influenza vaccine (IIV4) containing two influenza A strains and one strain from each B lineage (Yamagata and Victoria) may offer broader protection against seasonal influenza than inactivated trivalent influenza vaccine (IIV3), containing a single B strain. This study examined the safety, immunogenicity, and lot consistency of an IIV4 candidate. This phase III, randomized, controlled, multicenter trial in children/adolescents (9 through 17 years) and adults (18 through 60 years) was conducted in Australia and in the Philippines in 2012. The study was double-blind for IIV4 lots and open-label for IIV4 vs IIV3. Children/adolescents were randomized 2:2:2:1 and adults 10:10:10:1 to receive one of three lots of IIV4 or licensed IIV3. Safety data were collected for up to 6 months post-vaccination. Hemagglutination inhibition and seroneutralization antibody titers were assessed pre-vaccination and 21 days post-vaccination. 1648 adults and 329 children/adolescents received IIV4, and 56 adults and 55 children/adolescents received IIV3. Solicited reactions, unsolicited adverse events, and serious adverse events were similar for IIV3 and IIV4 recipients in both age groups. Injection-site pain, headache, malaise, and myalgia were the most frequently reported solicited reactions, most of which were mild and resolved within 3 days. No vaccine-related serious adverse events or deaths were reported. Post-vaccination antibody responses, seroconversion rates, and seroprotection rates for the 3 strains common to both vaccines were comparable for IIV3 and IIV4 in both age groups. Antibody responses to IIV4 were equivalent among vaccine lots and comparable between age groups for each of the 4 strains. IIV4 met all European Medicines Agency immunogenicity criteria for adults for all 4 strains. In both age groups, IIV4 was well tolerated and caused no safety concerns, induced robust antibody responses to all 4 influenza strains, and met all EMA immunogenicity

  14. Methodology for the economic evaluation of the application of the eolic energy and lot in the desalinization of sea water

    International Nuclear Information System (INIS)

    Cisneros Ramirez, Cesar A.

    2007-01-01

    The methodology that is presented allows the preliminary evaluation of the cost of the water of sea ($/m3) of a non connected system to the net, fed with renewable energy (eolic and photovoltaic lot) or with an electric generator. The production capacities they are limited to the 100 m 3 /d. The desalinisation plant can be fed by a single energy source or for but of one of them, what will constitute in this last case a system with feeding hybrid. In all the cases it was considered the necessity of energy storage to inclination of batteries to exception of when the feeding was by means of a generator electric. In the annex a chart is presented with the result of the application of the methodology

  15. Center of mass energy and system-size dependence of photon production at forward rapidity at RHIC

    Energy Technology Data Exchange (ETDEWEB)

    STAR Collaboration; Abelev, Betty

    2010-07-05

    We present the multiplicity and pseudorapidity distributions of photons produced in Au+Au and Cu+Cu collisions at {radical}s{sub NN} = 62.4 and 200 GeV. The photons are measured in the region -3.7 < {eta} < -2.3 using the photon multiplicity detector in the STAR experiment at RHIC. The number of photons produced per average number of participating nucleon pairs increases with the beam energy and is independent of the collision centrality. For collisions with similar average numbers of participating nucleons the photon multiplicities are observed to be similar for Au+Au and Cu+Cu collisions at a given beam energy. The ratios of the number of charged particles to photons in the measured pseudorapidity range are found to be 1.4 {+-} 0.1 and 1.2 {+-} 0.1 for {radical}s{sub NN} = 62.4 GeV and 200 GeV, respectively. The energy dependence of this ratio could reflect varying contributions from baryons to charged particles, while mesons are the dominant contributors to photon production in the given kinematic region. The photon pseudorapidity distributions normalized by average number of participating nucleon pairs, when plotted as a function of {eta} - ybeam, are found to follow a longitudinal scaling independent of centrality and colliding ion species at both beam energies.

  16. The active control devices of the size of products based on sapphire measuring tips with three degrees of freedom

    Science.gov (United States)

    Leun, E. V.; Leun, V. I.; Sysoev, V. K.; Zanin, K. A.; Shulepov, A. V.; Vyatlev, P. A.

    2018-01-01

    The article presents the results of the calculation of the load capacity of the active control devices (ACD) sapphire tip, which showed nearly 30-fold margin of safety to shock loads and experimental researches in mechanical contact with 5 cogs cutter 15 mm in diameter rotating with a frequency of 1000 rpm, which confirmed the calculations, determined the surface roughness Rz of the contact area of no more than 0.15 μm. Conditions have been created for recording without distortion of the image through a sapphire tip in contact with the processed article. A ACD design with new functionality is proposed: with one, two and three degrees of freedom of the sapphire tip and allows measuring the taper of the article and measurements on the chord. It is shown that with the implementation of their fixed head like the frame of the gyroscope with the rotations around the axes OY and OZ. It is shown that the rotation of the tip around the axis OX can be replaced more convenient for the implementation of the angular offset of the transferred image due to rotation of the output end of the flexible optical waveguide relative to the input. This makes it possible to reduce the "blurring of the image" during registration of the fast moving product profile when the slope of the recorder lines coincides with the slope of the edges of the image elements of the selected moving elements of the article.

  17. Parking Lot Runoff Quality and Treatment Efficiency of a Stormwater-Filtration Device, Madison, Wisconsin, 2005-07

    Science.gov (United States)

    Horwatich, Judy A.; Bannerman, Roger T.

    2010-01-01

    To evaluate the treatment efficiency of a stormwater-filtration device (SFD) for potential use at Wisconsin Department of Transportation (WisDOT) park-and-ride facilities, a SFD was installed at an employee parking lot in downtown Madison, Wisconsin. This type of parking lot was chosen for the test site because the constituent concentrations and particle-size distributions (PSDs) were expected to be similar to those of a typical park-and-ride lot operated by WisDOT. The objective of this particular installation was to reduce loads of total suspended solids (TSS) in stormwater runoff to Lake Monona. This study also was designed to provide a range of treatment efficiencies expected for a SFD. Samples from the inlet and outlet were analyzed for 33 organic and inorganic constituents, including 18 polycyclic aromatic hydrocarbons (PAHs). Samples were also analyzed for physical properties, including PSD. Water-quality samples were collected for 51 runoff events from November 2005 to August 2007. Samples from all runoff events were analyzed for concentrations of suspended sediment (SS). Samples from 31 runoff events were analyzed for 15 constituents, samples from 15 runoff events were analyzed for PAHs, and samples from 36 events were analyzed for PSD. The treatment efficiency of the SFD was calculated using the summation of loads (SOL) and the efficiency ratio methods. Constituents for which the concentrations and (or) loads were decreased by the SFD include TSS, SS, volatile suspended solids, total phosphorous (TP), total copper, total zinc, and PAHs. The efficiency ratios for these constituents are 45, 37, 38, 55, 22, 5, and 46 percent, respectively. The SOLs for these constituents are 32, 37, 28, 36, 23, 8, and 48 percent, respectively. The SOL for chloride was -21 and the efficiency ratio was -18. Six chemical constituents or properties-dissolved phosphorus, chemical oxygen demand, dissolved zinc, total dissolved solids, dissolved chemical oxygen demand, and

  18. There is no one-size-fits-all product for InSAR; on the inclusion of contextual information for geodetically-proof InSAR data products

    Science.gov (United States)

    Hanssen, R. F.

    2017-12-01

    In traditional geodesy, one is interested in determining the coordinates, or the change in coordinates, of predefined benchmarks. These benchmarks are clearly identifiable and are especially established to be representative of the signal of interest. This holds, e.g., for leveling benchmarks, for triangulation/trilateration benchmarks, and for GNSS benchmarks. The desired coordinates are not identical to the basic measurements, and need to be estimated using robust estimation procedures, where the stochastic nature of the measurements is taken into account. For InSAR, however, the `benchmarks' are not predefined. In fact, usually we do not know where an effective benchmark is located, even though we can determine its dynamic behavior pretty well. This poses several significant problems. First, we cannot describe the quality of the measurements, unless we already know the dynamic behavior of the benchmark. Second, if we don't know the quality of the measurements, we cannot compute the quality of the estimated parameters. Third, rather harsh assumptions need to be made to produce a result. These (usually implicit) assumptions differ between processing operators and the used software, and are severely affected by the amount of available data. Fourth, the `relative' nature of the final estimates is usually not explicitly stated, which is particularly problematic for non-expert users. Finally, whereas conventional geodesy applies rigorous testing to check for measurement or model errors, this is hardly ever done in InSAR-geodesy. These problems make it rather impossible to provide a precise, reliable, repeatable, and `universal' InSAR product or service. Here we evaluate the requirements and challenges to move towards InSAR as a geodetically-proof product. In particular this involves the explicit inclusion of contextual information, as well as InSAR procedures, standards and a technical protocol, supported by the International Association of Geodesy and the

  19. Hydrologic and Pollutant Removal Performance of a Full-Scale, Fully Functional Permeable Pavement Parking Lot

    Science.gov (United States)

    In accordance with the need for full-scale, replicated studies of permeable pavement systems used in their intended application (parking lot, roadway, etc.) across a range of climatic events, daily usage conditions, and maintenance regimes to evaluate these systems, the EPA’s Urb...

  20. Performance of engineered soil and trees in a parking lot bioswale

    Science.gov (United States)

    Qingfu Xiao; Gregory McPherson

    2011-01-01

    A bioswale integrating an engineered soil and trees was installed in a parking lot to evaluate its ability to reduce storm runoff, pollutant loading, and support tree growth. The adjacent control and treatment sites each received runoff from eight parking spaces and were identical except that there was no bioswale for the control site. A tree was planted at both sites...

  1. 78 FR 43753 - Inspection and Weighing of Grain in Combined and Single Lots

    Science.gov (United States)

    2013-07-22

    ... USGSA regulations for shiplots, unit trains, and lash barges. This final rule allows for breaks in... the loading of the lot must be reasonably continuous, with no consecutive break in loading to exceed... superseded; (iii) The location of the grain, if at rest, or the name(s) of the elevator(s) from which or into...

  2. How well do we understand nitrous oxide emissions from open-lot cattle systems?

    Science.gov (United States)

    Nitrous oxide is an important greenhouse gas that is produced in manure. Open lot beef cattle feedyards emit nitrous oxide but little information is available about exactly how much is produced. This has become an important research topic because of environmental concerns. Only a few methods are ava...

  3. Manufacturability: from design to SPC limits through "corner-lot" characterization

    Science.gov (United States)

    Hogan, Timothy J.; Baker, James C.; Wesneski, Lisa; Black, Robert S.; Rothenbury, Dave

    2005-01-01

    Texas Instruments" Digital Micro-mirror Device, is used in a wide variety of optical display applications ranging from fixed and portable projectors to high-definition television (HDTV) to digital cinema projection systems. A new DMD pixel architecture, called "FTP", was designed and qualified by Texas Instruments DLPTMTM Group in 2003 to meet increased performance objectives for brightness and contrast ratio. Coordination between design, test and fabrication groups was required to balance pixel performance requirements and manufacturing capability. "Corner Lot" designed experiments (DOE) were used to verify "fabrication space" available for the pixel design. The corner lot technique allows confirmation of manufacturability projections early in the design/qualification cycle. Through careful design and analysis of the corner-lot DOE, a balance of critical dimension (cd) "budgets" is possible so that specification and process control limits can be established that meet both customer and factory requirements. The application of corner-lot DOE is illustrated in a case history of the DMD "FTP" pixel. The process for balancing test parameter requirements with multiple critical dimension budgets is shown. MEMS/MOEMS device design and fabrication can use similar techniques to achieve agressive design-to-qualification goals.

  4. Flexible interaction of plug-in electric vehicle parking lots for efficient wind integration

    International Nuclear Information System (INIS)

    Heydarian-Forushani, E.; Golshan, M.E.H.; Shafie-khah, M.

    2016-01-01

    Highlights: • Interactive incorporation of plug-in electric vehicle parking lots is investigated. • Flexible energy and reserve services are provided by electric vehicle parking lots. • Uncertain characterization of electric vehicle owners’ behavior is taken into account. • Coordinated operation of parking lots can facilitate wind power integration. - Abstract: The increasing share of uncertain wind generation has changed traditional operation scheduling of power systems. The challenges of this additional variability raise the need for an operational flexibility in providing both energy and reserve. One key solution is an effective incorporation of plug-in electric vehicles (PEVs) into the power system operation process. To this end, this paper proposes a two-stage stochastic programming market-clearing model considering the network constraints to achieve the optimal scheduling of conventional units as well as PEV parking lots (PLs) in providing both energy and reserve services. Different from existing works, the paper pays more attention to the uncertain characterization of PLs takes into account the arrival/departure time of PEVs to/from the PL, the initial state of charge (SOC) of PEVs, and their battery capacity through a set of scenarios in addition to wind generation scenarios. The results reveal that although the cost saving as a consequence of incorporating PL to the grid is below 1% of total system cost, however, flexible interactions of PL in the energy and reserve markets can promote the integration of wind power more than 13.5%.

  5. Aligning workload control theory and practice : lot splitting and operation overlapping issues

    NARCIS (Netherlands)

    Fernandes, Nuno O.; Land, Martin J.; Carmo-Silva, S.

    2016-01-01

    This paper addresses the problem of lot splitting in the context of workload control (WLC). Past studies on WLC assumed that jobs released to the shop floor proceed through the different stages of processing without being split. However, in practice, large jobs are often split into smaller transfer

  6. Precipitation and runoff water quality from an urban parking lot and implications for tree growth

    Science.gov (United States)

    C. H. Pham; H. G. Halverson; G. M. Heisler

    1978-01-01

    The water quality of precipitation and runoff from a large parking lot in New Brunswick, New Jersey was studied during the early growing season, from March to June 1976. Precipitation and runoff from 10 storms were analyzed. The runoff was higher in all constituents considered except for P, Pb, and Cu. Compared with published values for natural waters, sewage effluent...

  7. Rapid assessment of antimicrobial resistance prevalence using a Lot Quality Assurance sampling approach

    NARCIS (Netherlands)

    van Leth, Frank; den Heijer, Casper; Beerepoot, Marielle; Stobberingh, Ellen; Geerlings, Suzanne; Schultsz, Constance

    2017-01-01

    Increasing antimicrobial resistance (AMR) requires rapid surveillance tools, such as Lot Quality Assurance Sampling (LQAS). LQAS classifies AMR as high or low based on set parameters. We compared classifications with the underlying true AMR prevalence using data on 1335 Escherichia coli isolates

  8. Alternate Methods of Effluent Disposal for On-Lot Home Sewage Systems. Special Circular 214.

    Science.gov (United States)

    Wooding, N. Henry

    This circular provides current information for homeowners who must repair or replace existing on-lot sewage disposal systems. Several alternatives such as elevated sand mounds, sand-lined beds and trenches and oversized absorption areas are discussed. Site characteristics and preparation are outlined. Each alternative is accompanied by a diagram…

  9. Heat production and storage are positively correlated with measures of body size/composition and heart rate drift during vigorous running.

    Science.gov (United States)

    Buresh, Robert; Berg, Kris; Noble, John

    2005-09-01

    The purposes of this study were to determine the relationships between: (a) measures of body size/composition and heat production/storage, and (b) heat production/storage and heart rate (HR) drift during running at 95% of the velocity that elicited lactate threshold, which was determined for 20 healthy recreational male runners. Subsequently, changes in skin and tympanic temperatures associated with a vigorous 20-min run, HR, and VO2 data were recorded. It was found that heat production was significantly correlated with body mass (r = .687), lean mass (r = .749), and body surface area (BSA, r = .699). Heat storage was significantly correlated with body mass (r = .519), fat mass (r = .464), and BSA (r = .498). The percentage of produced heat stored was significantly correlated with body mass (r = .427), fat mass (r = .455), and BSA (r = .414). Regression analysis showed that the sum of body mass, percentage of body fat, BSA, lean mass, and fat mass accounted for 30% of the variability in heat storage. It was also found that HR drift was significantly correlated with heat storage (r = .383), percentage of produced heat stored (r = .433), and core temperature change (r = .450). It was concluded that heavier runners experienced greater heat production, heat storage, and core temperature increases than lighter runners during vigorous running.

  10. General Strategy for Rapid Production of Low-Dimensional All-Inorganic CsPbBr3 Perovskite Nanocrystals with Controlled Dimensionalities and Sizes.

    Science.gov (United States)

    Liu, Wenna; Zheng, Jinju; Cao, Sheng; Wang, Lin; Gao, Fengmei; Chou, Kuo-Chih; Hou, Xinmei; Yang, Weiyou

    2018-02-05

    Currently, all-inorganic CsPbX 3 (X = Br, I, Cl) perovskite nanocrystals (NCs) are shining stars with exciting potential applications in optoelectronic devices such as solar cells, light-emitting diodes, lasers, and photodetectors, due to their superior performance in comparison to their organic-inorganic hybrid counterparts. In the present work, we report a general strategy based on a microwave technique for the rapid production of low-dimensional all-inorganic CsPbBr 3 perovskite NCs with tunable morphologies within minutes. The effect of the key parameters such as the introduced ligands, solvents, and PbBr 2 precursors and microwave powers as well as the irradiation times on the production of perovskite NCs was systematically investigated, which allowed their growth with tunable dimensionalities and sizes. As a proof of concept, the ratio of OA to OAm as well as the concentration of PbBr 2 precursor played important roles in triggering the anisotropic growth of the perovskite NCs, favoring their growth into 1D/2D single-crystalline nanostructures. Meanwhile, their sizes could be tailored by controlling the microwave powers and irradiation times. The mechanism for the tunable growth of perovskite NCs is discussed.

  11. Intelligent optimization to integrate a plug-in hybrid electric vehicle smart parking lot with renewable energy resources and enhance grid characteristics

    International Nuclear Information System (INIS)

    Fazelpour, Farivar; Vafaeipour, Majid; Rahbari, Omid; Rosen, Marc A.

    2014-01-01

    Highlights: • The proposed algorithms handled design steps of an efficient parking lot of PHEVs. • Optimizations are performed with 1 h intervals to find optimum charging rates. • Multi-objective optimization is performed to find the optimum size and site of DG. • Optimal sizing of a PV–wind–diesel HRES is attained. • Charging rates are optimized intelligently during peak and off-peak times. - Abstract: Widespread application of plug-in hybrid electric vehicles (PHEVs) as an important part of smart grids requires drivers and power grid constraints to be satisfied simultaneously. We address these two challenges with the presence of renewable energy and charging rate optimization in the current paper. First optimal sizing and siting for installation of a distributed generation (DG) system is performed through the grid considering power loss minimization and voltage enhancement. Due to its benefits, the obtained optimum site is considered as the optimum location for constructing a movie theater complex equipped with a PHEV parking lot. To satisfy the obtained size of DG, an on-grid hybrid renewable energy system (HRES) is chosen. In the next set of optimizations, optimal sizing of the HRES is performed to minimize the energy cost and to find the best number of decision variables, which are the number of the system’s components. Eventually, considering demand uncertainties due to the unpredictability of the arrival and departure times of the vehicles, time-dependent charging rate optimizations of the PHEVs are performed in 1 h intervals for the 24-h of a day. All optimization problems are performed using genetic algorithms (GAs). The outcome of the proposed optimization sets can be considered as design steps of an efficient grid-friendly parking lot of PHEVs. The results indicate a reduction in real power losses and improvement in the voltage profile through the distribution line. They also show the competence of the utilized energy delivery method in

  12. Effects of fumaric acid supplementation on methane production and rumen fermentation in goats fed diets varying in forage and concentrate particle size.

    Science.gov (United States)

    Li, Zongjun; Liu, Nannan; Cao, Yangchun; Jin, Chunjia; Li, Fei; Cai, Chuanjiang; Yao, Junhu

    2018-01-01

    In rumen fermentation, fumaric acid (FA) could competitively utilize hydrogen with methanogenesis to enhance propionate production and suppress methane emission, but both effects were diet-dependent. This study aimed to explore the effects of FA supplementation on methanogenesis and rumen fermentation in goats fed diets varying in forage and concentrate particle size. Four rumen-cannulated goats were used in a 4 × 4 Latin square design with a 2 × 2 factorial arrangement of treatments: low or high ratio of forage particle size: concentrate particle size (Fps:Cps), without or with FA supplementation (24 g/d). Fps:Cps was higher in the diet with chopped alfalfa hay plus ground corn than in that with ground alfalfa hay plus crushed corn. Both increasing dietary Fps:Cps and FA supplementation shifted ruminal volatile fatty acid (VFA) patterns toward more propionate and less acetate in goats. An interaction between dietary Fps:Cps and FA supplementation was observed for the ratio of acetate to propionate (A:P), which was more predominant when FA was supplemented in the low-Fps:Cps diet. Methane production was reduced by FA, and the reduction was larger in the low-Fps:Cps diet (31.72%) than in the high-Fps:Cps diet (17.91%). Fumaric acid decreased ruminal total VFA concentration and increased ruminal pH. No difference was found in ruminal DM degradation of concentrate or alfalfa hay by dietary Fps:Cps or FA. Goats presented a lower ruminal methanogen abundance with FA supplementation and a higher B. fibrisolvens abundance with high dietary Fps:Cps. Adjusting dietary Fps:Cps is an alternative dietary model for studying diet-dependent effects without changing dietary chemical composition. Fumaric acid supplementation in the low-Fps:Cps diet showed greater responses in methane mitigation and propionate increase.

  13. Effects of particle size of processed barley grain, enzyme addition and microwave treatment on disappearance and gas production for feedlot cattle

    Directory of Open Access Journals (Sweden)

    Shin-ichi Tagawa

    2017-04-01

    Full Text Available Objective The effects of particle size of processed barley grain, enzyme addition and microwave treatment on in vitro dry matter (DM disappearance (DMD, gas production and fermentation pH were investigated for feedlot cattle. Methods Rumen fluid from four fistulated feedlot cattle fed a diet of 860 dry-rolled barley grain, 90 maize silage and 50 supplement g/kg DM was used as inoculum in 3 batch culture in vitro studies. In Experiment 1, dry-rolled barley and barley ground through a 1-, 2-, or 4-mm screen were used to obtain four substrates differing in particle size. In Experiment 2, cellulase enzyme (ENZ from Acremonium cellulolyticus Y-94 was added to dry-rolled and ground barley (2-mm at 0, 0.1, 0.5, 1, and 2 mg/g, while Experiment 3 examined the interactions between microwaving (0, 30, and 60 s microwaving and ENZ addition (0, 1, and 2 mg/g using dry-rolled barley and 2-mm ground barley. Results In Experiment 1, decreasing particle size increased DMD and gas production, and decreased fermentation pH (p<0.01. The DMD (g/kg DM of the dry-rolled barley after 24 h incubation was considerably lower (p<0.05 than that of the ground barley (119.1 dry-rolled barley versus 284.8 for 4-mm, 341.7 for 2-mm; and 358.6 for 1-mm. In Experiment 2, addition of ENZ to dry-rolled barley increased DMD (p<0.01 and tended to increase (p = 0.09 gas production and decreased (p<0.01 fermentation pH, but these variables were not affected by ENZ addition to ground barley. In Experiment 3, there were no interactions between microwaving and ENZ addition after microwaving for any of the variables. Microwaving had minimal effects (except decreased fermentation pH, but consistent with Experiment 2, ENZ addition increased (p<0.01 DMD and gas production, and decreased (p<0.05 fermentation pH of dry-rolled barley, but not ground barley. Conclusion We conclude that cellulase enzymes can be used to increase the rumen disappearance of barley grain when it is coarsely processed

  14. Polyelectrolyte Bundles: Finite size at thermodynamic equilibrium?

    Science.gov (United States)

    Sayar, Mehmet

    2005-03-01

    Experimental observation of finite size aggregates formed by polyelectrolytes such as DNA and F-actin, as well as synthetic polymers like poly(p-phenylene), has created a lot of attention in recent years. Here, bundle formation in rigid rod-like polyelectrolytes is studied via computer simulations. For the case of hydrophobically modified polyelectrolytes finite size bundles are observed even in the presence of only monovalent counterions. Furthermore, in the absence of a hydrophobic backbone, we have also observed formation of finite size aggregates via multivalent counterion condensation. The size distribution of such aggregates and the stability is analyzed in this study.

  15. Chemical analysis of DC745 Materials: DEV Lot 1 reinvestigation; barcodes P053387, P053388, and P053389

    Energy Technology Data Exchange (ETDEWEB)

    Dirmyer, Matthew R. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-11-09

    This report serves as a follow up to our initial development lot 1 chemical analysis report (LA-UR-16-21970). The purpose of that report was to determine whether or not certain combinations of resin lots and curing agent lots resulted in chemical differences in the final material. One finding of that report suggested that pad P053389 was different from the three other pads analyzed. This report consists of chemical analysis of P053387, P053388, and a reinvestigation of P053389 all of which came from the potentially suspect combination of resin and curing agents lot. The goal of this report is to determine whether the observations relating to P053389 were isolated to that particular pad or systemic to that combination of resin and curing agent lot. The following suite of analyses were performed on the pads: Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), Fourier Transform Infrared Spectroscopy (FT-IR), and Solid State Nuclear Magnetic Resonance (NMR). The overall conclusions of the study are that pads P053387 and P053388 behave more consistently with the pads of other resin lot and curing agent lot combinations and that the chemical observations made regarding pad P053389 are isolated to that pad and not representative of an issue with that resin lot and curing agent lot combination.

  16. Application of lot quality assurance sampling for leprosy elimination monitoring--examination of some critical factors.

    Science.gov (United States)

    Gupte, M D; Murthy, B N; Mahmood, K; Meeralakshmi, S; Nagaraju, B; Prabhakaran, R

    2004-04-01

    The concept of elimination of an infectious disease is different from eradication and in a way from control as well. In disease elimination programmes the desired reduced level of prevalence is set up as the target to be achieved in a practical time frame. Elimination can be considered in the context of national or regional levels. Prevalence levels depend on occurrence of new cases and thus could remain fluctuating. There are no ready pragmatic methods to monitor the progress of leprosy elimination programmes. We therefore tried to explore newer methods to answer these demands. With the lowering of prevalence of leprosy to the desired level of 1 case per 10000 population at the global level, the programme administrators' concern will be shifted to smaller areas e.g. national and sub-national levels. For monitoring this situation, we earlier observed that lot quality assurance sampling (LQAS), a quality control tool in industry was useful in the initially high endemic areas. However, critical factors such as geographical distribution of cases and adoption of cluster sampling design instead of simple random sampling design deserve attention before LQAS could generally be recommended. The present exercise was aimed at validating applicability of LQAS, and adopting these modifications for monitoring leprosy elimination in Tamil Nadu state, which was highly endemic for leprosy. A representative sample of 64000 people drawn from eight districts of Tamil Nadu state, India, with maximum allowable number of 25 cases was considered, using LQAS methodology to test whether leprosy prevalence was at or below 7 per 10000 population. Expected number of cases for each district was obtained assuming Poisson distribution. Goodness of fit for the observed and expected cases (closeness of the expected number of cases to those observed) was tested through chi(2). Enhancing factor (design effect) for sample size was obtained by computing the intraclass correlation. The survey actually

  17. A comparative study of the physical and chemical properties of nano-sized ZnO particles from multiple batches of three commercial products

    Energy Technology Data Exchange (ETDEWEB)

    Yin, Hong [Commonwealth Scientific and Industrial Research Organisation, Manufacturing Flagship (Australia); Coleman, Victoria A. [National Measurement Institute Australia, Nanometrology Section (Australia); Casey, Phil S., E-mail: Phil.Casey@csiro.au [Commonwealth Scientific and Industrial Research Organisation, Manufacturing Flagship (Australia); Angel, Brad [Commonwealth Scientific and Industrial Research Organisation, Land and Water Flagship (Australia); Catchpoole, Heather J. [National Measurement Institute Australia, Nanometrology Section (Australia); Waddington, Lynne [Commonwealth Scientific and Industrial Research Organisation, Manufacturing Flagship (Australia); McCall, Maxine J. [Commonwealth Scientific and Industrial Research Organisation, Food and Nutrition Flagship (Australia)

    2015-02-15

    Given the broad commercial applications for ZnO nanomaterials, accurate attribution of physicochemical characteristics that induce toxic effects is particularly important. We report on the physicochemical properties of three commercial nano-ZnO products: Z-COTE and Z-COTE HP1 from BASF, and Nanosun from Micronisers, and, for reference, “bulk” ZnO from Sigma-Aldrich. Z-COTE, Nanosun and “bulk” consist of uncoated particles with different sizes, while Z-COTE HP1 consists of nanoparticles with a hydrophobic coating. Specific batches of these ZnO products were included in the OECD Sponsorship Programme to test manufactured nanomaterials. In order to identify properties potentially susceptible to variations between production runs, three additional batches of Z-COTE and Nanosun and two additional batches of Z-COTE HP1 were also investigated here. In general, all products showed little variation between batches for properties measured from powdered samples, but batch variations in the amount of surface coating were evident for the coated Z-COTE HP1. Properties measured with samples dispersed in liquids (agglomeration, photocatalytic activity, dissolution) were highly dependent on dispersion protocols, and this made it difficult to differentiate between differences due to dispersion and due to batches. However, batch-sensitive properties did appear to be present in Z-COTE and Z-COTE HP1 (photocatalytic activity), and Nanosun (dissolution). Intra-batch time and/or storage-dependent changes in the applied surface coating, noted specifically for the OECD batch of Z-COTE HP1, highlight the need for best practice when storing and accessing stocks of nano products. Awareness of inter-batch and intra-batch variability is essential for commercial applications and for nanotoxicological studies aimed at identifying links between physicochemical properties and any adverse effects in biological systems.

  18. A comparative study of the physical and chemical properties of nano-sized ZnO particles from multiple batches of three commercial products

    Science.gov (United States)

    Yin, Hong; Coleman, Victoria A.; Casey, Phil S.; Angel, Brad; Catchpoole, Heather J.; Waddington, Lynne; McCall, Maxine J.

    2015-02-01

    Given the broad commercial applications for ZnO nanomaterials, accurate attribution of physicochemical characteristics that induce toxic effects is particularly important. We report on the physicochemical properties of three commercial nano-ZnO products: Z-COTE and Z-COTE HP1 from BASF, and Nanosun from Micronisers, and, for reference, "bulk" ZnO from Sigma-Aldrich. Z-COTE, Nanosun and "bulk" consist of uncoated particles with different sizes, while Z-COTE HP1 consists of nanoparticles with a hydrophobic coating. Specific batches of these ZnO products were included in the OECD Sponsorship Programme to test manufactured nanomaterials. In order to identify properties potentially susceptible to variations between production runs, three additional batches of Z-COTE and Nanosun and two additional batches of Z-COTE HP1 were also investigated here. In general, all products showed little variation between batches for properties measured from powdered samples, but batch variations in the amount of surface coating were evident for the coated Z-COTE HP1. Properties measured with samples dispersed in liquids (agglomeration, photocatalytic activity, dissolution) were highly dependent on dispersion protocols, and this made it difficult to differentiate between differences due to dispersion and due to batches. However, batch-sensitive properties did appear to be present in Z-COTE and Z-COTE HP1 (photocatalytic activity), and Nanosun (dissolution). Intra-batch time and/or storage-dependent changes in the applied surface coating, noted specifically for the OECD batch of Z-COTE HP1, highlight the need for best practice when storing and accessing stocks of nano products. Awareness of inter-batch and intra-batch variability is essential for commercial applications and for nanotoxicological studies aimed at identifying links between physicochemical properties and any adverse effects in biological systems.

  19. Changes in use of types of tobacco products by pack sizes and price segments, prices paid and consumption following the introduction of plain packaging in Australia.

    Science.gov (United States)

    Scollo, Michelle; Zacher, Meghan; Coomber, Kerri; Bayly, Megan; Wakefield, Melanie

    2015-04-01

    To describe changes among smokers in use of various types of tobacco products, reported prices paid and cigarette consumption following the standardisation of tobacco packaging in Australia. National cross-sectional telephone surveys of adult smokers were conducted from April 2012 (6 months before transition to plain packaging (PP)) to March 2014 (15 months afterwards). Multivariable logistic regression assessed changes in products, brands and pack types/sizes; multivariable linear regression examined changes in inflation-adjusted prices paid and reported cigarette consumption between the pre-PP and three subsequent periods-the transition phase, PP year 1 and PP post-tax (post a 12.5% tax increase in December 2013). The proportion of current smokers using roll-your-own (RYO) products fluctuated over the study period. Proportions using value brands of factory-made (FM) cigarettes increased from pre-PP (21.4%) to PP year 1 (25.5%; p=0.002) and PP post-tax (27.8%; pIntroduction of PP was associated with an increase in use of value brands, likely due to increased numbers available and smaller increases in prices for value relative to premium brands. Reported consumption declined following the December 2013 tax increase. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  20. Monsoon-induced changes in the size-fractionated phytoplankton biomass and production rate in the estuarine and coastal waters of southwest coast of India.

    Science.gov (United States)

    Madhu, N V; Jyothibabu, R; Balachandran, K K

    2010-07-01

    Changes in the autotrophic pico- (0.2-2 microm), nano- (2-20 microm), and microplankton (>20 microm) biomass (chlorophyll a) and primary production were measured in the estuarine and coastal waters off Cochin, southwest coast of India during the onset and establishment of a monsoon. During this period, the estuary was dominated by nutrient-rich freshwater, whereas the coastal waters were characterized with higher salinity values (>30 psu) and less nutrients. The average surface chlorophyll a concentrations and primary production rates were higher in the estuary (average 13.7 mg m(-3) and 432 mgC m(-3) day(-1)) as compared to the coastal waters (5.3 mg m(-3) and 224 mgC m(-3) day(-1)). The nanoplankton community formed the major fraction of chlorophyll a and primary production, both in the estuary (average 85 +/- SD 8.3% and 81.2 +/- SD 3.2%) and the coastal waters (average 73.2 +/- SD 17.2% and 81.9 +/- 15.7%). Nanoplankton had the maximum photosynthetic efficiency in the coastal waters (average 4.8 +/- SD 3.9 mgC mgChl a m(-3) h(-1)), whereas in the estuary, the microplankton had higher photosynthetic efficiency (average 7.4 +/- 7 mgC mgChl a m(-3) h(-1)). The heavy cloud cover and increased water column turbidity not only limit the growth of large-sized phytoplankton in the Cochin estuary and coastal waters but also support the proliferation of nanoplankton community during the monsoon season, even though large variation in nanoplankton chlorophyll a and production exists between these two areas.

  1. Perception that "everything requires a lot of effort": transcultural SCL-25 item validation.

    Science.gov (United States)

    Moreau, Nicolas; Hassan, Ghayda; Rousseau, Cécile; Chenguiti, Khalid

    2009-09-01

    This brief report illustrates how the migration context can affect specific item validity of mental health measures. The SCL-25 was administered to 432 recently settled immigrants (220 Haitian and 212 Arabs). We performed descriptive analyses, as well as Infit and Outfit statistics analyses using WINSTEPS Rasch Measurement Software based on Item Response Theory. The participants' comments about the item You feel everything requires a lot of effort in the SCL-25 were also qualitatively analyzed. Results revealed that the item You feel everything requires a lot of effort is an outlier and does not adjust in an expected and valid fashion with its cluster items, as it is over-endorsed by Haitian and Arab healthy participants. Our study thus shows that, in transcultural mental health research, the cultural and migratory contexts may interact and significantly influence the meaning of some symptom items and consequently, the validity of symptom scales.

  2. An improved hierarchical A * algorithm in the optimization of parking lots

    Science.gov (United States)

    Wang, Yong; Wu, Junjuan; Wang, Ying

    2017-08-01

    In the parking lot parking path optimization, the traditional evaluation index is the shortest distance as the best index and it does not consider the actual road conditions. Now, the introduction of a more practical evaluation index can not only simplify the hardware design of the boot system but also save the software overhead. Firstly, we establish the parking lot network graph RPCDV mathematical model and all nodes in the network is divided into two layers which were constructed using different evaluation function base on the improved hierarchical A * algorithm which improves the time optimal path search efficiency and search precision of the evaluation index. The final results show that for different sections of the program attribute parameter algorithm always faster the time to find the optimal path.

  3. Brive-la-Gaillarde (Corrèze). Îlot Massénat

    OpenAIRE

    Ollivier, Julien

    2018-01-01

    La fouille archéologique de l’îlot Massénat a été entreprise à l’été 2016, en préalable à la construction de logements et de locaux à vocation commerciale avec parking semi-enterré. Elle a porté sur une surface d’environ 900 m2 et a duré 2 mois avec une équipe de 5 archéologues. Le site, diagnostiqué en 2004 (dir. J. Roger, Inrap), est localisé au sud du Puy Saint-Pierre, où ont été découverts tous les vestiges de l’occupation antique de Brive, encore mal caractérisée. L’îlot est par ailleurs...

  4. Making Marble Tracks Can Involve Lots of Fun as Well as STEM Learning

    Science.gov (United States)

    Nagel, Bert

    2015-01-01

    Marble tracks are a very popular toy and big ones can be found in science centres in many countries. If children want to make a marble track themselves it is quite a job. It takes a long time, they can take up a lot of space and most structures are quite fragile, as the materials used can very quickly prove unfit for the task and do not last very…

  5. A DESIGN STUDY OF AN INNOVATIVE BARRIER SYSTEM FOR PERSONAL PARKING LOTS

    OpenAIRE

    BÖRKLÜ, Hüseyin; KALYON, Sadık

    2018-01-01

    The increase in the number of cars made it necessary to protectthe parking areas. This research includes a literature review aboutcommercially available barriers, which are arm barriers, rising bollards, chainbarriers, automatic and manual private barriers from the point of common andside-by-side parking lots. Their advantages and disadvantages are evaluated.After the literature review work, a design requirements list for a car parkprotector, which includes important and strong properties of ...

  6. Carbon dioxide and methane emissions from the scale model of open dairy lots.

    Science.gov (United States)

    Ding, Luyu; Cao, Wei; Shi, Zhengxiang; Li, Baoming; Wang, Chaoyuan; Zhang, Guoqiang; Kristensen, Simon

    2016-07-01

    To investigate the impacts of major factors on carbon loss via gaseous emissions, carbon dioxide (CO2) and methane (CH4) emissions from the ground of open dairy lots were tested by a scale model experiment at various air temperatures (15, 25, and 35 °C), surface velocities (0.4, 0.7, 1.0, and 1.2 m sec(-1)), and floor types (unpaved soil floor and brick-paved floor) in controlled laboratory conditions using the wind tunnel method. Generally, CO2 and CH4 emissions were significantly enhanced with the increase of air temperature and velocity (P emissions, which were also affected by air temperature and soil characteristics of the floor. Although different patterns were observed on CH4 emission from the soil and brick floors at different air temperature-velocity combinations, statistical analysis showed no significant difference in CH4 emissions from different floors (P > 0.05). For CO2, similar emissions were found from the soil and brick floors at 15 and 25 °C, whereas higher rates were detected from the brick floor at 35 °C (P emission from the scale model was exponentially related to CO2 flux, which might be helpful in CH4 emission estimation from manure management. Gaseous emissions from the open lots are largely dependent on outdoor climate, floor systems, and management practices, which are quite different from those indoors. This study assessed the effects of floor types and air velocities on CO2 and CH4 emissions from the open dairy lots at various temperatures by a wind tunnel. It provided some valuable information for decision-making and further studies on gaseous emissions from open lots.

  7. Choosing a Cluster Sampling Design for Lot Quality Assurance Sampling Surveys

    OpenAIRE

    Hund, Lauren; Bedrick, Edward J.; Pagano, Marcello

    2015-01-01

    Lot quality assurance sampling (LQAS) surveys are commonly used for monitoring and evaluation in resource-limited settings. Recently several methods have been proposed to combine LQAS with cluster sampling for more timely and cost-effective data collection. For some of these methods, the standard binomial model can be used for constructing decision rules as the clustering can be ignored. For other designs, considered here, clustering is accommodated in the design phase. In this paper, we comp...

  8. APPLICATION OF LOT QUALITY ASSURANCE SAMPLING FOR ASSESSING DISEASE CONTROL PROGRAMMES - EXAMINATION OF SOME METHODOLOGICAL ISSUES

    OpenAIRE

    T. R. RAMESH RAO

    2011-01-01

    Lot Quality Assurance Sampling (LQAS), a statistical tool in industrial setup, has been in use since 1980 for monitoring and evaluation of programs on disease control / immunization status among children / health workers performance in health system. While conducting LQAS in the field, there are occasions, even after due care of design, there are practical and methodological issues to be addressed before it is recommended for implementation and intervention. LQAS is applied under the assumpti...

  9. Solving portfolio selection problems with minimum transaction lots based on conditional-value-at-risk

    Science.gov (United States)

    Setiawan, E. P.; Rosadi, D.

    2017-01-01

    Portfolio selection problems conventionally means ‘minimizing the risk, given the certain level of returns’ from some financial assets. This problem is frequently solved with quadratic or linear programming methods, depending on the risk measure that used in the objective function. However, the solutions obtained by these method are in real numbers, which may give some problem in real application because each asset usually has its minimum transaction lots. In the classical approach considering minimum transaction lots were developed based on linear Mean Absolute Deviation (MAD), variance (like Markowitz’s model), and semi-variance as risk measure. In this paper we investigated the portfolio selection methods with minimum transaction lots with conditional value at risk (CVaR) as risk measure. The mean-CVaR methodology only involves the part of the tail of the distribution that contributed to high losses. This approach looks better when we work with non-symmetric return probability distribution. Solution of this method can be found with Genetic Algorithm (GA) methods. We provide real examples using stocks from Indonesia stocks market.

  10. Three Permeable Pavements Performances for Priority Metal Pollutants and Metals associated with Deicing Chemicals from Edison Parking Lot, NJ - abstract

    Science.gov (United States)

    The U.S. Environmental Protection Agency constructed a 4000-m2 parking lot in Edison, New Jersey in 2009. The parking lot is surfaced with three permeable pavements [permeable interlocking concrete pavers (PICP), pervious concrete (PC), and porous asphalt (PA)]. Samples of each p...

  11. Three Permeable Pavements Performances for Priority Metal Pollutants and Metals Associated with Deicing Chemicals from Edison Parking Lot, NJ

    Science.gov (United States)

    The U.S. Environmental Protection Agency constructed a 4000-m2 parking lot in Edison, New Jersey in 2009. The parking lot is surfaced with three permeable pavements [permeable interlocking concrete pavers (PICP), pervious concrete (PC), and porous asphalt (PA)]. Samples of each p...

  12. Logistic planning and control of reworking perishable production defectives

    NARCIS (Netherlands)

    R.H. Teunter (Ruud); S.D.P. Flapper

    2001-01-01

    textabstractWe consider a production line that is dedicated to a single product. Produced lots may be non-defective, reworkable defective, or non-reworkable defective. The production line switches between production and rework. After producing a fixed number (N) of lots, all reworkable defective

  13. On-line coupling of size exclusion chromatography with mixed-mode liquid chromatography for comprehensive profiling of biopharmaceutical drug product.

    Science.gov (United States)

    He, Yan; Friese, Olga V; Schlittler, Michele R; Wang, Qian; Yang, Xun; Bass, Laura A; Jones, Michael T

    2012-11-02

    A methodology based on on-line coupling of size exclusion chromatography (SEC) with mixed-mode liquid chromatography (LC) has been developed. The method allows for simultaneous measurement of a wide range of components in biopharmaceutical drug products. These components include the active pharmaceutical ingredient (protein) and various kinds of excipients such as cations, anions, nonionic hydrophobic surfactant and hydrophilic sugars. Dual short SEC columns are used to separate small molecule excipients from large protein molecules. The separated protein is quantified using a UV detector at 280 nm. The isolated excipients are switched, online, to the Trinity P1 mixed-mode column for separation, and detected by an evaporative light scattering detector (ELSD). Using a stationary phase with 1.7 μm particles in SEC allows for the use of volatile buffers for both SEC and mix-mode separation. This facilitates the detection of different excipients by ELSD and provides potential for online characterization of the protein with mass spectrometry (MS). The method has been applied to quantitate protein and excipients in different biopharmaceutical drug products including monoclonal antibodies (mAb), antibody drug conjugates (ADC) and vaccines. Copyright © 2012 Elsevier B.V. All rights reserved.

  14. Predicting Consumer Biomass, Size-Structure, Production, Catch Potential, Responses to Fishing and Associated Uncertainties in the World’s Marine Ecosystems

    Science.gov (United States)

    Jennings, Simon; Collingridge, Kate

    2015-01-01

    Existing estimates of fish and consumer biomass in the world’s oceans are disparate. This creates uncertainty about the roles of fish and other consumers in biogeochemical cycles and ecosystem processes, the extent of human and environmental impacts and fishery potential. We develop and use a size-based macroecological model to assess the effects of parameter uncertainty on predicted consumer biomass, production and distribution. Resulting uncertainty is large (e.g. median global biomass 4.9 billion tonnes for consumers weighing 1 g to 1000 kg; 50% uncertainty intervals of 2 to 10.4 billion tonnes; 90% uncertainty intervals of 0.3 to 26.1 billion tonnes) and driven primarily by uncertainty in trophic transfer efficiency and its relationship with predator-prey body mass ratios. Even the upper uncertainty intervals for global predictions of consumer biomass demonstrate the remarkable scarcity of marine consumers, with less than one part in 30 million by volume of the global oceans comprising tissue of macroscopic animals. Thus the apparently high densities of marine life seen in surface and coastal waters and frequently visited abundance hotspots will likely give many in society a false impression of the abundance of marine animals. Unexploited baseline biomass predictions from the simple macroecological model were used to calibrate a more complex size- and trait-based model to estimate fisheries yield and impacts. Yields are highly dependent on baseline biomass and fisheries selectivity. Predicted global sustainable fisheries yield increases ≈4 fold when smaller individuals (production estimates, which have yet to be achieved with complex models, and will therefore help to highlight priorities for future research and data collection. However, the focus on simple model structures and global processes means that non-phytoplankton primary production and several groups, structures and processes of ecological and conservation interest are not represented

  15. Parking lot runoff quality and treatment efficiencies of a hydrodynamic-settling device in Madison, Wisconsin, 2005-6

    Science.gov (United States)

    Horwatich, Judy A.; Bannerman, Roger T.

    2012-01-01

    A hydrodynamic-settling device was installed in 2004 to treat stormwater runoff from a roof and parking lot located at the Water Utility Administration Building in Madison, Wis. The U.S. Geological Survey, in cooperation with the Wisconsin Department of Natural Resources, the City of Madison, cities in the Waukesha Permit Group, Hydro International, Earth Tech, Inc., National Sanitation Foundation International, and the U.S. Environmental Protection Agency, monitored the device from November 2005 through September 2006 to evaluate it as part of the U.S. Environmental Protection Agency's Environmental Technology Verification Program. Twenty-three runoff events monitored for flow volume and water quality at the device's inlet and outlet were used to calculate the percentage of pollutant reduction for the device. The geometric mean concentrations of suspended sediment (SS), "adjusted" total suspended solids (TSS), total phosphorus (TP), dissolved phosphorus (DP), total recoverable zinc (TZn), and total recoverable copper (TCu) measured at the inlet were 107 mg/L (milligrams per liter), 92 mg/L, 0.17 mg/L, 0.05 mg/L, 38 μg/L (micrograms per liter), and 12 μg/L, respectively, and these concentrations are in the range of values observed in stormwater runoff from other parking lots in Wisconsin and Michigan. Efficiency of the settling device was calculated using the efficiency ratio and summation of loads (SOL) methods. Using the efficiency ratio method, the device reduced concentrations of SS, and DP, by 19, and 15, percent, respectively. Using the efficiency ratio method, the device increased "adjusted" TSS and TZn concentrations by 5 and 19, respectively. Bypass occurred for 3 of the 23 runoff events used in this assessment, and the bypass flow and water-quality concentrations were used to determine the efficiency of the bypass system. Concentrations of SS, "adjusted" TSS, and DP were reduced for the system by 18, 5, and 18, respectively; however, TZn increased by 5

  16. Polling, production & priorities

    NARCIS (Netherlands)

    Winands, E.M.M.

    2007-01-01

    Polling, Production & Priorities The present monograph focuses on the so-called stochastic economic lot scheduling problem (SELSP), which deals with the make-to-stock production of multiple standardized products on a single machine with limited capacity under random demands, possibly random setup

  17. Products, practices and processes: exploring the innovation potential for low-carbon housing refurbishment among small and medium-sized enterprises (SMEs) in the UK construction industry

    International Nuclear Information System (INIS)

    Killip, Gavin

    2013-01-01

    Scenario-based studies agree that the technical potential for CO 2 emissions reduction from the housing stock is large. This paper explores how a market might be developed for the refurbishment activities assumed in these scenarios, taking the existing market for repair, maintenance and improvement (RMI) as its starting point. Interviews with 16 small and medium-sized enterprises (SMEs) in the construction industry reveal the interdependence of products, practices and processes in housing renovation activities. Conservative practice as well as innovation can be understood as the outcome of multi-lateral influences on firms from other firms, clients, the material buildings and products in their working lives, and from regulations and regulators. Contractors' openness to innovation is contingent on an informal approach to risk assessment, taking account of cost, time efficiency, client demands, and installer confidence in the reliability of the resulting work. The implications of the research are discussed in relation to the need for new practices and processes on refurbishment projects, raising questions for future research on key questions of quality assurance, performance over time, the application of standards, and vocational training. -- Highlights: •Repair, maintenance and improvement works are triggers for low-carbon refurbishment. •Millions of property owners and small firms make for fragmented decision-making. •Actor-Network Theory is used to frame decision-making processes for refurbishment. •Small builders can be innovative if clients allow time and money for experimentation. •Energy policy for existing homes needs to engage with the construction sector

  18. Where is my car? Examining wayfinding behavior in a parking lot

    Directory of Open Access Journals (Sweden)

    Rodrigo Mora

    2014-08-01

    Full Text Available This article examines wayfinding behavior in an extended parking lot belonging to one of the largest shopping malls in Santiago, Chile. About 500 people were followed while going to the mall and returning from it, and their trajectories were mapped and analyzed. The results indicate that inbound paths were, in average, 10% shorter that outbound paths, and that people stopped three times more frequently when leaving the mall than when accessing it. It is argued that these results are in line with previous research on the subject, which stress the importance of environmental information in shaping people`s behavior.

  19. Synthesis of bis- and tris(indolylmethanes catalyzed by an inorganic nano-sized catalyst followed by dehydrogenation to hyperconjugated products

    Directory of Open Access Journals (Sweden)

    Khorshidi Alireza

    2016-01-01

    Full Text Available A set of bis- and tris(indolylmethanes were prepared and dehydrogenated to their hyperconjugated products in a one-pot fashion. Nano-sized-SO3H functionalized mesoporous KIT-6 coated on magnetite nanoparticles (Fe3O4@SiO2@KIT-6-OSO3H was used as an efficient catalyst in the first step of synthesis, and dehydrogenation was performed by using (NH42S2O8 after removal of the catalyst. The catalyst was fully characterized by Fourier transform infrared spectroscopy (FT-IR, transmission electron microscopy (TEM and X-ray powder diffraction (XRD, as well as nitrogen adsorption-desorption isotherms. The bis- and tris(indolylmethanes were studied by UV-Vis spectroscopy before and after dehydrogenation, and effect of the ambient parameters on their spectra was investigated. It was found that bis- and tris(indolylmethanes have no considerable absorption in the visible range and what makes them colorful is partial dehydrogenation due to exposure to air. Our catalyst as a new combination of known materials, showed superiority in terms of yield, time, and mild reaction conditions in comparison with previous reports.

  20. Energy and system size dependence of Ξ- and anti Ξ+ production in relativistic heavy-ion collisions at the CERN SPS

    International Nuclear Information System (INIS)

    Mitrovski, M.K.

    2007-01-01

    The strong nuclear force is described by Quantum Chromodynamics (QCD), the parallel field theory to Quantum Electrodynamics (QED) that describes the electromagnetic force. It is propagated by gluons analogously to photons in the electromagnetic force, but unlike photons, which do not carry electric charge, gluons carry color, and they can self-interact. However, as individual quarks have never been observed in nature, it is postulated that the color charge itself is confined, and hence all baryons and mesons must be colorless objects. To study nuclear matter under extreme conditions, it is necessary to create hot and dense nuclear matter in the laboratory. In such conditions the confinement between quarks and gluons is cancelled (deconfinement). This state is characterized with a quasi-free behavior of quarks and gluons. The strange (s) and anti-strange (anti-s) quarks are not contained in the colliding nuclei, but are newly produced and show up in the strange hadrons in the final state. It was suggested that strange particle production is enhanced in the QGP with respect to that in a hadron gas. This enhancement is relative to a collision where a transition to a QGP phase does not take place, such as p+p collisions where the system size is very small. Therefore the energy- and system size dependence is studied to receive a picture about the initial state. In this thesis experimental results on the energy- and system size dependence of Xi hyperon production at the CERN SPS is shown. All measurements were performed with the NA49 detector at the CERN SPS. NA49 took central lead-lead collisions from 20 - 158 AGeV, minimus bias lead-lead collisions at 40 and 158 AGeV, and semi-central silicon-silicon collisions at 158 AGeV. The NA49 experiment features a large acceptance in the forward hemisphere allowing for measurements of Xi rapidity spectra. At the SPS accelerator at CERN Pb+Pb collisions are performed with beam energies to 158 AGeV. The analyzed data sets were

  1. Energy and system size dependence of {xi}{sup -} and anti {xi}{sup +} production in relativistic heavy-ion collisions at the CERN SPS

    Energy Technology Data Exchange (ETDEWEB)

    Mitrovski, M.K.

    2007-11-21

    The strong nuclear force is described by Quantum Chromodynamics (QCD), the parallel field theory to Quantum Electrodynamics (QED) that describes the electromagnetic force. It is propagated by gluons analogously to photons in the electromagnetic force, but unlike photons, which do not carry electric charge, gluons carry color, and they can self-interact. However, as individual quarks have never been observed in nature, it is postulated that the color charge itself is confined, and hence all baryons and mesons must be colorless objects. To study nuclear matter under extreme conditions, it is necessary to create hot and dense nuclear matter in the laboratory. In such conditions the confinement between quarks and gluons is cancelled (deconfinement). This state is characterized with a quasi-free behavior of quarks and gluons. The strange (s) and anti-strange (anti-s) quarks are not contained in the colliding nuclei, but are newly produced and show up in the strange hadrons in the final state. It was suggested that strange particle production is enhanced in the QGP with respect to that in a hadron gas. This enhancement is relative to a collision where a transition to a QGP phase does not take place, such as p+p collisions where the system size is very small. Therefore the energy- and system size dependence is studied to receive a picture about the initial state. In this thesis experimental results on the energy- and system size dependence of Xi hyperon production at the CERN SPS is shown. All measurements were performed with the NA49 detector at the CERN SPS. NA49 took central lead-lead collisions from 20 - 158 AGeV, minimus bias lead-lead collisions at 40 and 158 AGeV, and semi-central silicon-silicon collisions at 158 AGeV. The NA49 experiment features a large acceptance in the forward hemisphere allowing for measurements of Xi rapidity spectra. At the SPS accelerator at CERN Pb+Pb collisions are performed with beam energies to 158 AGeV. The analyzed data sets were

  2. Portion size

    Science.gov (United States)

    ... of cards One 3-ounce (84 grams) serving of fish is a checkbook One-half cup (40 grams) ... for the smallest size. By eating a small hamburger instead of a large, you will save about 150 calories. ...

  3. A STUDY OF MEASLES VACCINATION COVERAGE BY LOT QUALITY ASSURANCE SAMPLING TECHNIQUE AND FACTORS RELATED TO NON-VACCINATION IN BELLARY DISTRICT

    Directory of Open Access Journals (Sweden)

    A Karinagannanavar

    2013-12-01

    Full Text Available Background: Measles is a leading cause of childhood morbidity and mortality accounting for nearly half the global burden of vaccine preventable deaths. In 2007, there were 197000 measles deaths globally nearly 540 deaths every day or 22 deaths per hour. According to NFHS-3 2005 – 06 total measles vaccination coverage in Karnataka was 72%. Objectives: 1 To find out measles vaccination coverage in Bellary District. 2 To know the reasons for non-vaccination. Material and Methods:   A Cross sectional study was conducted from May 2010 to April 2011 at areas covered by PHC/PHU of Bellary district by using Lot Quality Assurance Sampling (LQAS method. Total sample size was 1007(53X19. Bellary district has 47 primary health centers (PHC and 6 primary health units (PHU, all of which were studied in which each PHC/PHU is considered as a lot. The data was collected from parents of children aged 12-23 months using a pretested semi structured questionnaire. Results: Out of 53 PHC’s/PHU’s we accepted 41 (77.35% and vaccination coverage in these lots was considered as more than 85% and overall coverage in Bellary district was 69.41% and  53.62% had received Vitamin A supplementation. The reasons for non vaccination were lack of awareness, ignorance, ill health of the child, fear of side effects & lack of health services. Conclusion: Measles vaccination coverage was 69.41% and the reasons for non vaccination were lack of awareness, ignorance, ill health of the child, fear of side effects and lack of health services.

  4. A STUDY OF MEASLES VACCINATION COVERAGE BY LOT QUALITY ASSURANCE SAMPLING TECHNIQUE AND FACTORS RELATED TO NON-VACCINATION IN BELLARY DISTRICT

    Directory of Open Access Journals (Sweden)

    A Karinagannanavar

    2013-09-01

    Full Text Available Background: Measles is a leading cause of childhood morbidity and mortality accounting for nearly half the global burden of vaccine preventable deaths. In 2007, there were 197000 measles deaths globally nearly 540 deaths every day or 22 deaths per hour. According to NFHS-3 2005 – 06 total measles vaccination coverage in Karnataka was 72%. Objectives: 1 To find out measles vaccination coverage in Bellary District. 2 To know the reasons for non-vaccination. Material and Methods:   A Cross sectional study was conducted from May 2010 to April 2011 at areas covered by PHC/PHU of Bellary district by using Lot Quality Assurance Sampling (LQAS method. Total sample size was 1007(53X19. Bellary district has 47 primary health centers (PHC and 6 primary health units (PHU, all of which were studied in which each PHC/PHU is considered as a lot. The data was collected from parents of children aged 12-23 months using a pretested semi structured questionnaire. Results: Out of 53 PHC’s/PHU’s we accepted 41 (77.35% and vaccination coverage in these lots was considered as more than 85% and overall coverage in Bellary district was 69.41% and  53.62% had received Vitamin A supplementation. The reasons for non vaccination were lack of awareness, ignorance, ill health of the child, fear of side effects & lack of health services. Conclusion: Measles vaccination coverage was 69.41% and the reasons for non vaccination were lack of awareness, ignorance, ill health of the child, fear of side effects and lack of health services.

  5. Artificial neural network (ANN)-based prediction of depth filter loading capacity for filter sizing.

    Science.gov (United States)

    Agarwal, Harshit; Rathore, Anurag S; Hadpe, Sandeep Ramesh; Alva, Solomon J

    2016-11-01

    This article presents an application of artificial neural network (ANN) modelling towards prediction of depth filter loading capacity for clarification of a monoclonal antibody (mAb) product during commercial manufacturing. The effect of operating parameters on filter loading capacity was evaluated based on the analysis of change in the differential pressure (DP) as a function of time. The proposed ANN model uses inlet stream properties (feed turbidity, feed cell count, feed cell viability), flux, and time to predict the corresponding DP. The ANN contained a single output layer with ten neurons in hidden layer and employed a sigmoidal activation function. This network was trained with 174 training points, 37 validation points, and 37 test points. Further, a pressure cut-off of 1.1 bar was used for sizing the filter area required under each operating condition. The modelling results showed that there was excellent agreement between the predicted and experimental data with a regression coefficient (R 2 ) of 0.98. The developed ANN model was used for performing variable depth filter sizing for different clarification lots. Monte-Carlo simulation was performed to estimate the cost savings by using different filter areas for different clarification lots rather than using the same filter area. A 10% saving in cost of goods was obtained for this operation. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:1436-1443, 2016. © 2016 American Institute of Chemical Engineers.

  6. Further observations on comparison of immunization coverage by lot quality assurance sampling and 30 cluster sampling.

    Science.gov (United States)

    Singh, J; Jain, D C; Sharma, R S; Verghese, T

    1996-06-01

    Lot Quality Assurance Sampling (LQAS) and standard EPI methodology (30 cluster sampling) were used to evaluate immunization coverage in a Primary Health Center (PHC) where coverage levels were reported to be more than 85%. Of 27 sub-centers (lots) evaluated by LQAS, only 2 were accepted for child coverage, whereas none was accepted for tetanus toxoid (TT) coverage in mothers. LQAS data were combined to obtain an estimate of coverage in the entire population; 41% (95% CI 36-46) infants were immunized appropriately for their ages, while 42% (95% CI 37-47) of their mothers had received a second/ booster dose of TT. TT coverage in 149 contemporary mothers sampled in EPI survey was also 42% (95% CI 31-52). Although results by the two sampling methods were consistent with each other, a big gap was evident between reported coverage (in children as well as mothers) and survey results. LQAS was found to be operationally feasible, but it cost 40% more and required 2.5 times more time than the EPI survey. LQAS therefore, is not a good substitute for current EPI methodology to evaluate immunization coverage in a large administrative area. However, LQAS has potential as method to monitor health programs on a routine basis in small population sub-units, especially in areas with high and heterogeneously distributed immunization coverage.

  7. Why gerontology and geriatrics can teach us a lot about mentoring.

    Science.gov (United States)

    Clark, Phillip G

    2018-05-15

    Gerontology, geriatrics, and mentoring have a lot in common. The prototype of this role was Mentor, an older adult in Homer's The Odyssey, who was enlisted to look after Odysseus' son, Telemachus, while his father was away fighting the Trojan War. Portrayed as an older man, the name "mentor" literally means "a man who thinks," which is not a bad characterization generally for faculty members in gerontology! In particular, gerontological and geriatrics education can teach us a lot about the importance of mentoring and provide some critical insights into this role: (1) the importance of interprofessional leadership and modeling, (2) the application of the concept of "grand-generativity" to mentoring, (3) "it takes a community" to be effective in mentoring others, and (4) the need to tailor mentorship styles to the person and the situation. This discussion explores these topics and argues that gerontological and geriatrics educators have a particularly important role and responsibility in mentoring students, colleagues, and administrators related to the very future of our field.

  8. Demonstration Assessment of Light-Emitting Diode (LED) Parking Lot Lighting in Leavenworth, KS

    Energy Technology Data Exchange (ETDEWEB)

    Myer, Michael; Kinzey, Bruce R.; Curry, Ku' uipo

    2011-05-06

    This report describes the process and results of a demonstration of solid-state lighting (SSL) technology in a commercial parking lot lighting application, under the U.S. Department of Energy (DOE) Solid-State Lighting Technology GATEWAY Demonstration Program. The parking lot is for customers and employees of a Walmart Supercenter in Leavenworth, Kansas and this installation represents the first use of the LED Parking Lot Performance Specification developed by the DOE’s Commercial Building Energy Alliance. The application is a parking lot covering more than a half million square feet, lighted primarily by light-emitting diodes (LEDs). Metal halide wall packs were installed along the building facade. This site is new construction, so the installed baseline(s) were hypothetical designs. It was acknowledged early on that deviating from Walmart’s typical design would reduce the illuminance on the site. Walmart primarily uses 1000W pulse-start metal halide (PMH) lamps. In order to provide a comparison between both typical design and a design using conventional luminaires providing a lower illuminance, a 400W PMH design was also considered. As mentioned already, the illuminance would be reduced by shifting from the PMH system to the LED system. The Illuminating Engineering Society of North America (IES) provides recommended minimum illuminance values for parking lots. All designs exceeded the recommended illuminance values in IES RP-20, some by a wider margin than others. Energy savings from installing the LED system compared to the different PMH systems varied. Compared to the 1000W PMH system, the LED system would save 63 percent of the energy. However, this corresponds to a 68 percent reduction in illuminance as well. In comparison to the 400W PMH system, the LED system would save 44 percent of the energy and provide similar minimum illuminance values at the time of relamping. The LED system cost more than either of the PMH systems when comparing initial costs

  9. Effect of pollen load size and source (self, outcross) on seed and fruit production in highbush blueberry cv. 'Bluecrop' (VACCINIUM CORYMBOSUM; Ericaceae).

    Science.gov (United States)

    Dogterom, M H; Winston, M L; Mukai, A

    2000-11-01

    Reproductive fitness of a plant is ultimately determined by both number and quality of seed offspring. This is determined by sexual selection of pollen microspores and ovules during pollination and fertilization. These processes may include pollen competition and seed abortion, which reduce the number of microspores and ovules available for final seed production. Thus, even an excess of pollen microspores to ovules does not result in fertile seeds equal to ovule number. We investigated pollen requirements of highbush blueberry (Vaccinium corymbosum cultivar 'Bluecrop') for maximal seed production and how fertile seed number translates into fruit quality, since fruit quality would ultimately determine the dispersal of its offspring. We demonstrate that individual blueberry flowers with a mean of 106 ovules reach their maximum fruit set and mass and minimum time to ripen when 125 outcross pollen tetrads pollinate a flower, compared to 10 or 25. Three hundred tetrads resulted in the increase of fertile seeds, but did not result in a further increase of fruit mass or fruit set, or decrease in time to ripen. We also examined the effect of pure and mixed loads of self and outcross pollen (25 and 125 tetrads), and found no differences in fertile seed number, fruit mass, or percentage fruit set when pollen loads were either 25 self or outcross pollen tetrads, although number of days to ripen was significantly shorter by 8 d with 25 outcross tetrads. When the pollen load of 125 tetrads consisted of self or a 50:50 mixture of self and outcross pollen, fruit mass, days to ripen, and percentage fruit set were not different from loads of 125 outcross pollen. In addition, a pollen load of 25 outcross tetrads resulted in fertile seed number and fruit quality in between that of 25 self, and 125 self, 125 mixed, or 125 outcross tetrads. Large, small, and flat seed types were identified, and only large seeds (length = 1.7 mm) were fertile. These results improve our understanding of

  10. Nuclear reaction of 10 B (n, α) 7 Li and grain size effects on the production of free radicals in alanine

    International Nuclear Information System (INIS)

    Zurita Petatan, S.L.

    1993-01-01

    In general, it is important to know the physical and chemical properties of any material that is exposed to ionizing radiation. In particular, in dosimetric work, the amount of the absorbed doses by these materials is of much interest, in such a way that several methods have been developed in the past. An important and quantitatively accessible radiation effect in organic substances is the production of free radicals that can be easily measured by 'ELECTRON PARAMAGNETIC RESONANCE SPECTROSCOPY (EPR)'. Numerous studies have been now been made on pure D L-Alanine irradiated with different radiation sources. Examination of the irradiated samples reveals the production of a stable free radical (CH 3 - CH. -COOH). In particular, gamma and electron irradiated D L-Alanine has received wide attention in the high doses interval (10 - 10 5 Gy). In contrast, there are very few EPR studies on thermal neutron radiation induced free radicals in pure D L-alanine. This may be due to the weak EPR signals observed in the irradiated samples. The objective of this work is to study for the first time the increase of the radical yield produced in neutron irradiated borated alanine by the EPR technique. For this purpose alanine has been mixed with borax in different stoichiometric proportions and grain sizes. When the mixture is neutron irradiated, the boron of the borax may experience a neutron capture reaction, 10 B (n, α) 7 Li. With this nuclear reaction it is supposed that the α particles will may impinge on the alanine molecules, producing in this way extra free radicals. Samples were irradiated in the thermal column of a Triga Mark III nuclear reactor with a thermal neutron flux of 5 x 10 7 n/Cm 2 -s. A signal enhancement of up to 1260 % is observed when samples of alanine-borax were intimately mixed in a stoichiometric ratio of 1:1. We also studied dosimetric characteristics of the mixed samples such as: a) Sensibility. b) Accuracy. c) Traceability. d) Stability. e)Fading. f

  11. Size matter!

    DEFF Research Database (Denmark)

    Hansen, Pelle Guldborg; Jespersen, Andreas Maaløe; Skov, Laurits Rhoden

    2015-01-01

    trash bags according to size of plates and weighed in bulk. Results Those eating from smaller plates (n=145) left significantly less food to waste (aver. 14,8g) than participants eating from standard plates (n=75) (aver. 20g) amounting to a reduction of 25,8%. Conclusions Our field experiment tests...... the hypothesis that a decrease in the size of food plates may lead to significant reductions in food waste from buffets. It supports and extends the set of circumstances in which a recent experiment found that reduced dinner plates in a hotel chain lead to reduced quantities of leftovers....

  12. Prospects for PWNe and SNRs science with the ASTRI mini-array of pre-production small-sized telescopes of the Cherenkov telescope array

    Science.gov (United States)

    Burtovoi, A.; Zampieri, L.; Giuliani, A.; Bigongiari, C.; Di Pierro, F.; Stamerra, A.

    2017-01-01

    The development and construction of the Cherenkov Telescope Array (CTA) opens up new opportunities for the study of very high energy (VHE, E > 100 GeV) sources. As a part of CTA, the ASTRI project, led by INAF, has one of the main goals to develop one of the mini-arrays of CTA pre-production telescopes, proposed to be installed at the CTA southern site. Thanks to the innovative dual-mirror optical design of its small-sized telescopes, the ASTRI mini-array will be characterized by a large field of view, an excellent angular resolution and a good sensitivity up to energies of several tens of TeV. Pulsar wind nebulae, along with Supernova Remnants, are among the most abundant sources that will be identified and investigated, with the ultimate goal to move significantly closer to an understanding of the origin of cosmic rays (CR). As part of the ongoing effort to investigate the scientific capabilities for both CTA as a whole and the ASTRI mini-array, we performed simulations of the Vela X region. We simulated its extended VHE γ-ray emission using the results of the detailed H.E.S.S. analysis of this source. We estimated the resolving capabilities of the diffuse emission and the detection significance of the pulsar with both CTA as a whole and the ASTRI mini-array. Moreover with these instruments it will be possible to observe the high-energy end of SNRs spectrum, searching for particles with energies near the cosmic-rays "knee" (E ˜ 1015 eV). We simulated a set of ASTRI mini-array observations for one young and an evolved SNRs in order to test the capabilities of this instrument to discover and study PeVatrons on the Galactic plane.

  13. Exploring Size.

    Science.gov (United States)

    Brand, Judith, Ed.

    1995-01-01

    "Exploring" is a magazine of science, art, and human perception that communicates ideas museum exhibits cannot demonstrate easily by using experiments and activities for the classroom. This issue concentrates on size, examining it from a variety of viewpoints. The focus allows students to investigate and discuss interconnections among…

  14. Use of Occupancy Sensors in LED Parking Lot and Garage Applications: Early Experiences

    Energy Technology Data Exchange (ETDEWEB)

    Kinzey, Bruce R.; Myer, Michael; Royer, Michael P.; Sullivan, Greg P.

    2012-11-07

    Occupancy sensor systems are gaining traction as an effective technological approach to reducing energy use in exterior commercial lighting applications. Done correctly, occupancy sensors can substantially enhance the savings from an already efficient lighting system. However, this technology is confronted by several potential challenges and pitfalls that can leave a significant amount of the prospective savings on the table. This report describes anecdotal experiences from field installations of occupancy sensor controlled light-emitting diode (LED) lighting at two parking structures and two parking lots. The relative levels of success at these installations reflect a marked range of potential outcomes: from an additional 76% in energy savings to virtually no additional savings. Several issues that influenced savings were encountered in these early stage installations and are detailed in the report. Ultimately, care must be taken in the design, selection, and commissioning of a sensor-controlled lighting installation, else the only guaranteed result may be its cost.

  15. Assessment of Seed Germination and Dormancy of Thirty Seeds Lots of

    Directory of Open Access Journals (Sweden)

    H.R Ehyaee

    2012-06-01

    Full Text Available Most seeds of medicinal plants due to ecological adaptation to environmental conditions have several types of dormancy. Hence, it's necessary to recognize ecological factors that affect dormancy and provide optimum conditions for germination in medicinal plant species. Thirty seed lots were used to estimate germination and dormancy of medicinal plants. Treatments were KNO3, (2% and scarification of seeds by sand paper, hypochlorite sodium and removing the seed coat with four replicates of 25 seeds. Maximum and minimum germination observed in H2O for Digitalis purpure 100% and Saponaria officinalis 0%. In KNO3 treatment, Portulaca oleracea had the highest germination of 91% and Hyocyamus niger had no any germinated seeds. In sand paper treatment, the Saponaria officinalis and Datura stramonium had maximum, 33% and minimum 0% germination respectively.

  16. Tracking of Vehicle Movement on a Parking Lot Based on Video Detection

    Directory of Open Access Journals (Sweden)

    Ján HALGAŠ

    2014-06-01

    Full Text Available This article deals with topic of transport vehicles identification for dynamic and static transport based on video detection. It explains some of the technologies and approaches necessary for processing of specific image information (transport situation. The paper also describes a design of algorithm for vehicle detection on parking lot and consecutive record of trajectory into virtual environment. It shows a new approach to moving object detection (vehicles, people, and handlers on an enclosed area with emphasis on secure parking. The created application enables automatic identification of trajectory of specific objects moving within the parking area. The application was created in program language C++ with using an open source library OpenCV.

  17. Rapid assessment of antimicrobial resistance prevalence using a Lot Quality Assurance sampling approach.

    Science.gov (United States)

    van Leth, Frank; den Heijer, Casper; Beerepoot, Mariëlle; Stobberingh, Ellen; Geerlings, Suzanne; Schultsz, Constance

    2017-04-01

    Increasing antimicrobial resistance (AMR) requires rapid surveillance tools, such as Lot Quality Assurance Sampling (LQAS). LQAS classifies AMR as high or low based on set parameters. We compared classifications with the underlying true AMR prevalence using data on 1335 Escherichia coli isolates from surveys of community-acquired urinary tract infection in women, by assessing operating curves, sensitivity and specificity. Sensitivity and specificity of any set of LQAS parameters was above 99% and between 79 and 90%, respectively. Operating curves showed high concordance of the LQAS classification with true AMR prevalence estimates. LQAS-based AMR surveillance is a feasible approach that provides timely and locally relevant estimates, and the necessary information to formulate and evaluate guidelines for empirical treatment.

  18. Measurements of the Cosmic Radiation Doses at Board of Aircraft of Polish Airlines LOT. Part 1

    International Nuclear Information System (INIS)

    Bilski, P.; Budzanowski, M.; Horwacik, T.; Marczewska, B.; Olko, P.

    2000-12-01

    Radiation doses received by a group of 30 pilots of the Polish Airlines LOT were investigated between July and October 2000. The measurement of the low-LET component of the cosmic radiation, lasting in average 2 months, was performed with 7 LiF:Mg,Ti and 7 L iF:Mg,Cu,P thermoluminescent detectors. The neutron component was measured with the thermoluminescent albedo cassettes. Additionally for all flights, records of altitude profiles were kept and effective doses were then calculated with the CARI-6 computer code. In total, about 560 flights were included in the calculations. The highest obtained dose was about 0.8 mSv in 2 months. Results of calculations are mostly consistent with the results of measurements. (author)

  19. [Acceptance of lot sampling: its applicability to the evaluation of the primary care services portfolio].

    Science.gov (United States)

    López-Picazo Ferrer, J

    2001-05-15

    To determine the applicability of the acceptance of lot quality assurance sampling (LQAS) in the primary care service portfolio, comparing its results with those given by classic evaluation. Compliance with the minimum technical norms (MTN) of the service of diabetic care was evaluated through the classic methodology (confidence 95%, accuracy 5%, representativeness of area, sample of 376 histories) and by LQAS (confidence 95%, power 80%, representativeness of primary care team (PCT), defining a lot by MTN and PCT, sample of 13 histories/PCT). Effort, information obtained and its operative nature were assessed. 44 PCTs from Murcia Primary Care Region. Classic methodology: compliance with MTN ranged between 91.1% (diagnosis, 95% CI, 84.2-94.0) and 30% (repercussion in viscera, 95% CI, 25.4-34.6). Objectives in three MTN were reached (diagnosis, history and EKG). LQAS: no MTN was accepted in all the PCTs, being the most accepted (42 PCT, 95.6%) and the least accepted (24 PCT, 55.6%). In 9 PCT all were accepted (20.4%), and in 2 none were accepted (4.5%). Data were analysed through Pareto charts. Classic methodology offered accurate results, but did not identify which centres were those that did not comply (general focus). LQAS was preferable for evaluating MTN and probably coverage because: 1) it uses small samples, which foment internal quality-improvement initiatives; 2) it is easy and rapid to execute; 3) it identifies the PCT and criteria where there is an opportunity for improvement (specific focus), and 4) it can be used operatively for monitoring.

  20. Storm water runoff for the Y-12 Plant and selected parking lots

    International Nuclear Information System (INIS)

    Collins, E.T.

    1996-01-01

    A comparison of storm water runoff from the Y-12 Plant and selected employee vehicle parking lots to various industry data is provided in this document. This work is an outgrowth of and part of the continuing Non-Point Source Pollution Elimination Project that was initiated in the late 1980s. This project seeks to identify area pollution sources and remediate these areas through the Resource Conservation and Recovery Act/Comprehensive Environmental Response, Compensation, and Liability Act (RCRA/CERCLA) process as managed by the Environmental Restoration Organization staff. This work is also driven by the Clean Water Act Section 402(p) which, in part, deals with establishing a National Pollutant Discharge Elimination System (NPDES) permit for storm water discharges. Storm water data from events occurring in 1988 through 1991 were analyzed in two reports: Feasibility Study for the Best Management Practices to Control Area Source Pollution Derived from Parking Lots at the DOE Y-12 Plant, September 1992, and Feasibility Study of Best Management Practices for Non-Point Source Pollution Control at the Oak Ridge Y-12 Plant, February 1993. These data consisted of analysis of outfalls discharging to upper East Fork Poplar Creek (EFPC) within the confines of the Y-12 Plant (see Appendixes D and E). These reports identified the major characteristics of concern as copper, iron, lead, manganese, mercury, nitrate (as nitrogen), zinc, biological oxygen demand (BOD), chemical oxygen demand (COD), total suspended solids (TSS), fecal coliform, and aluminum. Specific sources of these contaminants were not identifiable because flows upstream of outfalls were not sampled. In general, many of these contaminants were a concern in many outfalls. Therefore, separate sampling exercises were executed to assist in identifying (or eliminating) specific suspected sources as areas of concern

  1. Irritable Bowel Syndrome Treatments Aren't One-Size-Fits-All

    Science.gov (United States)

    ... is working to bring more treatments to the market. “There’s a lot of new research about the ... in carbohydrates, spicy or fatty foods, milk products, coffee, alcohol and caffeine. IBS and Children It’s difficult ...

  2. A Moving Optical Fibre Technique for Structure Analysis of Heterogenous Products: Application to the Determination of the Bubble-Size Distribution in Liquid Foams

    OpenAIRE

    Bisperink, C. G. J.; Akkerman, J. C.; Prins, A.; Ronteltap, A. D.

    1992-01-01

    The bubble-size distribution in liquid foams measured as a function of time can be used to distinguish between the physical processes that determine the breakdown of foams. A new method based on an optical fibre technique was developed to measure various foam characteristics e.g. the rate of drainage, the rate of foam collapse, the change in gas fraction, interbubble gas diffusion (disproportionation) and the evolution of the bubble - size distribution during the ageing of the foam. The metho...

  3. Potentials of Microalgae Biodiesel Production in Nigeria | Ogbonna ...

    African Journals Online (AJOL)

    Bio-energies are renewable, sustainable and environmentally-friendly. Although Nigeria has a lot of various biomass materials, production of bio-fuels in Nigeria is faced with a lot of challenges. It has been argued that large scale production of bio-energies from food crops as replacement or supplements to fossil fuels ...

  4. LOT A2 Test, THC-modelling of bentonite buffer in a final repository of spent nuclear fuel

    International Nuclear Information System (INIS)

    Itaelae, A.; Olin, M.; Rasilainen, K.; Pulkkanen, V.M.

    2010-01-01

    Document available in extended abstract form only. The Finnish spent nuclear fuel disposal is planned to be based on the KBS-3V repository concept. Within this concept, the role of the bentonite buffer is considered to be central. The aim of this study was to model the evolution of the buffer during the thermal phase (heat-generating period of spent fuel), when the bentonite is only partially saturated initially, and the surrounding rock matrix is assumed to be fully saturated. It is essential to study how temperature will affect saturation and also how both of these affect the chemistry of bentonite. In order to make the modeling more concrete, an example experimental case was considered: Long Term Test of Buffer Materials (LOT) A2-parcel test at the Aespoe Hard Rock Laboratory (HRL) in Sweden. In the A2-parcel the MX-80 bentonite was exposed to adverse (120-150 deg. C) temperature conditions and high temperature gradients. The test parcel diameter was smaller than in the actual KBS-3V deposition hole to speed up the saturation. The chemical behaviour of minerals causes their redistribution inside the bentonite. For example, according to the laboratory tests, gypsum dissolves and anhydrite precipitates near the heater-bentonite interface. Also, incoming groundwater affects the bentonite pore water and its properties. These changes may, in turn, influence the mechanical properties of the bentonite. A coupled Thermo-Hydro-Chemical (THC) model was applied, which means that all mechanical effects were ignored. The purpose of the model was first to achieve a satisfactory match between the model and experimental results, and, therefore, the time frame was limited to ten years (LOT A-2 parcel test lasted approximately 6 years). The system was simplified to 1-D in order to reduce the computational work, which can be very significant due to complex chemical calculations. The 1-D model results are reported in Itaelae (2009). The aim is to extend the calculations to 2-D

  5. EFSA Panel on Dietetic Products, Nutrition and Allergies (NDA); Scientific Opinion on the substantiation of a health claim related to “hypo-caloric snacks (KOT products)” and “contributes to reduce adipocyte size at the abdominal level in the context of a low-calorie diet” pursuant to Article 13

    DEFF Research Database (Denmark)

    Tetens, Inge

    to “hypo-caloric snacks (KOT products)” and “contributes to reduce adipocyte size at the abdominal level in the context of a low-calorie diet”. The target population is overweight individuals who wish to reduce their abdominal fat. The applicant states that adipocyte size at the (subcutaneous) abdominal...... adipocyte size at the abdominal level is a beneficial physiological effect per se and concludes that a cause and effect relationship has not been established between the consumption of “hypo-caloric snacks (KOT products) for use in low-calorie diets for weight reduction” and a beneficial physiological...

  6. LOT Project long term test of buffer material at the Aespoe HRL

    International Nuclear Information System (INIS)

    Karnland, O.; Olsson, S.; Dueck, A.; Birgersson, M.; Nilsson, U.; Hernan-Haakansson, T.; Pedersen, K.; Eriksson, S.; Eriksen, T.; Eriksson, S.; Rosborg, B.; Muurinen, A.; Rousset, D.; Mosser-Ruck, R.; Cathelineau, M.; Villieras, F.; Pelletier, M.; Kaufold, S.; Dohrmann, R.; Fernandez, R.; Maeder, U.; Koroleva, M.

    2010-01-01

    Document available in extended abstract form only. Bentonite clay has been proposed as buffer material in several concepts for HLW repositories. The decaying spent fuel in the HLW canisters will increase temperature of the bentonite buffer. A number of laboratory test series, made by different research groups, have resulted in various bentonite alteration models. According to these models no significant alteration of the buffer is expected to take place at the prevailing physico-chemical conditions in the proposed Swedish KBS-3 repository, neither during, nor after water saturation. The ongoing LOT test series is focused on quantifying the mineralogical alteration in the buffer in a repository like environment at the Aespoe HRL. Further, buffer related processes concerning bacterial survival/activity, cation transport, and copper corrosion are studied. In total, the LOT test series includes seven test parcels, of which three are exposed to standard KBS-3 conditions and four test parcels are exposed to adverse conditions. Each test parcel contains a central Cu-tube surrounded by bentonite cylinder rings with a diameter of 30 cm, additional test material (Cu coupons, 60 Co tracers, bacteria etc) and instruments. Electrical heaters were place within the copper tube in order to simulate effect of decaying power from the spent fuel. The entire test parcels were released from the rock after the field exposure by overlapping boring and the bentonite material was analyzed with respect to: - physical properties (water content, density, swelling pressure, hydraulic conductivity, rheology); - mineralogical alteration in the bentonite; - distribution of added substances (e.g diffusional transport of 60 Co); - copper corrosion; - bacterial survival/activity. Two one year tests were started in 1996 and terminated in 1998. The results from tests and analyses are presented in SKB TR-00-22. The remaining four test parcels were installed during the fall 1999 plus one additional one

  7. Productivity

    DEFF Research Database (Denmark)

    Spring, Martin; Johnes, Geraint; Hald, Kim Sundtoft

    Productivity is increasingly critical for developed economies. It has always been important: as Paul Krugman puts it, “Productivity isn’t everything, but in the long run it is almost everything. A country’s ability to improve its standard of living over time depends almost entirely on its ability...... to raise its output per worker”(Krugman, 1994). Analyses of productivity have, by and large, been the preserve of economists. Operations Management (OM) is rooted in a similar concern for the efficient use of scarce resources; Management Accounting (MA) is concerned with the institutionalised measurement...... and management of productivity. Yet the three perspectives are rarely connected. This paper is a sketch of a literature review seeking to identify, contrast and reconcile these three perspectives. In so doing, it aims to strengthen the connections between policy and managerial analyses of productivity....

  8. Emulation and Control of Slugging Flows in a Gas-Lifted Offshore Oil Production Well Through a Lab-sized Facility

    DEFF Research Database (Denmark)

    Jepsen, Kasper Lund; Hansen, Leif; Mai, Christian

    2013-01-01

    flow and pressures in the production well system, which is referred to as the slugging flow problem. This instability is mainly due to the casing-heading mechanism. This work investigates the possibility to use a feedback control for stabilizing the production operation without sacrificing...... the production capability. A labsized production well system is constructed in an economic manner. Afterwards, a simple nonlinear model is derived according to physical principles and then verified with the experimental facility. A observer-based state feedback control is designed to handle the potential...... slugging problem. The developed controller manipulates the openness degree of the production choke based on feedback a number of pressure measurements. The current simulation results showed satisfactory control performances by stabilizing the system operation at some relatively large production rate which...

  9. Rhizosphere size

    Science.gov (United States)

    Kuzyakov, Yakov; Razavi, Bahar

    2017-04-01

    Estimation of the soil volume affected by roots - the rhizosphere - is crucial to assess the effects of plants on properties and processes in soils and dynamics of nutrients, water, microorganisms and soil organic matter. The challenges to assess the rhizosphere size are: 1) the continuum of properties between the root surface and root-free soil, 2) differences in the distributions of various properties (carbon, microorganisms and their activities, various nutrients, enzymes, etc.) along and across the roots, 3) temporal changes of properties and processes. Thus, to describe the rhizosphere size and root effects, a holistic approach is necessary. We collected literature and own data on the rhizosphere gradients of a broad range of physico-chemical and biological properties: pH, CO2, oxygen, redox potential, water uptake, various nutrients (C, N, P, K, Ca, Mg, Mn and Fe), organic compounds (glucose, carboxylic acids, amino acids), activities of enzymes of C, N, P and S cycles. The collected data were obtained based on the destructive approaches (thin layer slicing), rhizotron studies and in situ visualization techniques: optodes, zymography, sensitive gels, 14C and neutron imaging. The root effects were pronounced from less than 0.5 mm (nutrients with slow diffusion) up to more than 50 mm (for gases). However, the most common effects were between 1 - 10 mm. Sharp gradients (e.g. for P, carboxylic acids, enzyme activities) allowed to calculate clear rhizosphere boundaries and so, the soil volume affected by roots. The first analyses were done to assess the effects of soil texture and moisture as well as root system and age on these gradients. The most properties can be described by two curve types: exponential saturation and S curve, each with increasing and decreasing concentration profiles from the root surface. The gradient based distribution functions were calculated and used to extrapolate on the whole soil depending on the root density and rooting intensity. We

  10. Evaluating the Capability of Grass Swale for the Rainfall Runoff Reduction from an Urban Parking Lot, Seoul, Korea

    OpenAIRE

    Muhammad Shafique; Reeho Kim; Kwon Kyung-Ho

    2018-01-01

    This field study elaborates the role of grass swale in the management of stormwater in an urban parking lot. Grass swale was constructed by using different vegetations and local soil media in the parking lot of Mapu-gu Seoul, Korea. In this study, rainfall runoff was first retained in soil and the vegetation layers of the grass swale, and then infiltrated rainwater was collected with the help of underground perforated pipe, and passed to an underground storage trench. In this way, grass swale...

  11. Standard practice for sampling special nuclear materials in multi-container lots

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    1987-01-01

    1.1 This practice provides an aid in designing a sampling and analysis plan for the purpose of minimizing random error in the measurement of the amount of nuclear material in a lot consisting of several containers. The problem addressed is the selection of the number of containers to be sampled, the number of samples to be taken from each sampled container, and the number of aliquot analyses to be performed on each sample. 1.2 This practice provides examples for application as well as the necessary development for understanding the statistics involved. The uniqueness of most situations does not allow presentation of step-by-step procedures for designing sampling plans. It is recommended that a statistician experienced in materials sampling be consulted when developing such plans. 1.3 The values stated in SI units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standar...

  12. Sampling and analysis plan for the former Atomic Energy Commission bus lot property

    International Nuclear Information System (INIS)

    Nielson, R.R.

    1998-07-01

    This sampling and analysis plan (SAP) presents the rationale and strategy for the sampling and analysis activities proposed in support of an initial investigation of the former Atomic Energy Commission (AEC) bus lot property currently owned by Battelle Memorial Institute. The purpose of the proposed sampling and analysis activity is to investigate the potential for contamination above established action levels. The SAP will provide defensible data of sufficient quality and quantity to support recommendations of whether any further action within the study area is warranted. To assist in preparing sampling plans and reports, the Washington State Department of Ecology (Ecology) has published Guidance on Sampling and Data Analysis Methods. To specifically address sampling plans for petroleum-contaminated sites, Ecology has also published Guidance for Remediation of Petroleum Contaminated Sites. Both documents were used as guidance in preparing this plan. In 1992, a soil sample was taken within the current study area as part of a project to remove two underground storage tanks (USTs) at Battelle's Sixth Street Warehouse Petroleum Dispensing Station (Section 1.3). The results showed that the sample contained elevated levels of total petroleum hydrocarbons (TPH) in the heavy distillate range. This current study was initiated in part as a result of that discovery. The following topics are considered: the historical background of the site, current site conditions, previous investigations performed at the site, an evaluation based on the available data, and the contaminants of potential concern (COPC)

  13. Use of Lot Quality Assurance Sampling to Ascertain Levels of Drug Resistant Tuberculosis in Western Kenya.

    Directory of Open Access Journals (Sweden)

    Julia Jezmir

    Full Text Available To classify the prevalence of multi-drug resistant tuberculosis (MDR-TB in two different geographic settings in western Kenya using the Lot Quality Assurance Sampling (LQAS methodology.The prevalence of drug resistance was classified among treatment-naïve smear positive TB patients in two settings, one rural and one urban. These regions were classified as having high or low prevalence of MDR-TB according to a static, two-way LQAS sampling plan selected to classify high resistance regions at greater than 5% resistance and low resistance regions at less than 1% resistance.This study classified both the urban and rural settings as having low levels of TB drug resistance. Out of the 105 patients screened in each setting, two patients were diagnosed with MDR-TB in the urban setting and one patient was diagnosed with MDR-TB in the rural setting. An additional 27 patients were diagnosed with a variety of mono- and poly- resistant strains.Further drug resistance surveillance using LQAS may help identify the levels and geographical distribution of drug resistance in Kenya and may have applications in other countries in the African Region facing similar resource constraints.

  14. Effect of some parameters in the response of the Perspex 3042, Lot L amber dosemeters

    International Nuclear Information System (INIS)

    Prieto M, E.F.; Barrera G, G.

    2004-01-01

    The answer of the dosimetric systems is affected by several factors, for what should know as these factors they influence in each one of the different dosimetric systems and by this way to minimize its effect in the value of the absorbed dose and to obtain exact dose values. One of the dosimetric systems more used in the high dose dosimetry like routine dosemeter for the control of the irradiation process are the Perspex dosemeters, for their speed in the obtaining the information, their easy manipulation and the precision that they present. To this dosemeters group they belong the same as the Red and Clear the Amber, which are adequate for the measurement of the radiation dose in the range of high doses. The objective of the present work is to obtain the calibration curves of the dosemeters Amber Perspex 3042, Lot L under our work conditions, like they are the irradiation temperatures and of storage and to know the influence of the rate dose in the value of the absorbed dose for different measurement wavelengths, as well as, the relationship among the one post-irradiation time and the specific absorbance value induced in function of the absorbed dose. (Author)

  15. Unmanned Aerial Vehicle-Based Automobile License Plate Recognition System for Institutional Parking Lots

    Directory of Open Access Journals (Sweden)

    Julian Dasilva

    2017-10-01

    Full Text Available Unmanned aerial vehicles (UAVs, also known as drones have many applications and they are a current trend across many industries. They can be used for delivery, sports, surveillance, professional photography, cinematography, military combat, natural disaster assistance, security, and the list grows every day. Programming opens an avenue to automate many processes of daily life and with the drone as aerial programmable eyes, security and surveillance can become more efficient and cost effective. At Barry University, parking is becoming an issue as the number of people visiting the school greatly outnumbers the convenient parking locations. This has caused a multitude of hazards in parking lots due to people illegally parking, as well as unregistered vehicles parking in reserved areas. In this paper, we explain how automated drone surveillance is utilized to detect unauthorized parking at Barry University. The automated process is incorporated into Java application and completed in three steps: collecting visual data, processing data automatically, and sending automated responses and queues to the operator of the system.

  16. Sampling and analysis plan for the former Atomic Energy Commission bus lot property

    Energy Technology Data Exchange (ETDEWEB)

    Nielson, R.R.

    1998-07-01

    This sampling and analysis plan (SAP) presents the rationale and strategy for the sampling and analysis activities proposed in support of an initial investigation of the former Atomic Energy Commission (AEC) bus lot property currently owned by Battelle Memorial Institute. The purpose of the proposed sampling and analysis activity is to investigate the potential for contamination above established action levels. The SAP will provide defensible data of sufficient quality and quantity to support recommendations of whether any further action within the study area is warranted. To assist in preparing sampling plans and reports, the Washington State Department of Ecology (Ecology) has published Guidance on Sampling and Data Analysis Methods. To specifically address sampling plans for petroleum-contaminated sites, Ecology has also published Guidance for Remediation of Petroleum Contaminated Sites. Both documents were used as guidance in preparing this plan. In 1992, a soil sample was taken within the current study area as part of a project to remove two underground storage tanks (USTs) at Battelle`s Sixth Street Warehouse Petroleum Dispensing Station (Section 1.3). The results showed that the sample contained elevated levels of total petroleum hydrocarbons (TPH) in the heavy distillate range. This current study was initiated in part as a result of that discovery. The following topics are considered: the historical background of the site, current site conditions, previous investigations performed at the site, an evaluation based on the available data, and the contaminants of potential concern (COPC).

  17. International reactions after the resumption of nuclear tests: lot of noise for nothing?

    International Nuclear Information System (INIS)

    Montesquieu, E. de

    1996-01-01

    In 1995, the French President announced that France would perform an ultimate campaign of nuclear tests before a complete banishment as soon as spring 1996. The campaign effectively ended on time and six tests took place between September 5, 1995 and January 27, 1996. The disarmament process went on and the international negotiations in progress at that time were not affected by the French policy. However, this campaign has caused a strong emotion, if not in the entire World, at least in part of the planet and in particular in Western Europe. This report analyses the reactions from the different governments and from the public opinion and shows their impact on the French diplomacy. Content: Part 1 - general considerations: 1 - lot of noise for nothing?: the objectives of French diplomacy; the acts (a quasi lack of sanctions, a temporary degradation of our relations with a limited number of countries); the rhetoric (diplomatic regrets in first time, slip-ups in the second time, the public opinion weight); 2 - the lessons learnt: the opinion and the management of the foreign policy (the image of France, the communication fight); the geopolitical lessons (European Union: community solidarity and European defense; the South Pacific area); 3 - a case study: Japan: the time of uncertainties (domestic situation, external policy); the Japanese reactions after the tests resumption. Part 2 - synthesis of reactions after the resumption of nuclear tests by France: Pacific bordering countries (South Pacific, Latin America); Western Europe countries; non-European countries; Conclusions

  18. Capacity Analysis Of Parking Lot And Volume Of Vehicle Toward Sustainable Parking Convenience

    Science.gov (United States)

    Herdiansyah, Herdis; Sugiyanto; Guntur Octavianto, Andrew; Guntur Aritonang, Edison; Nova Imaduddin, Malya; Dedi; Rilaningrum, Magfira

    2017-10-01

    The development of human's population is having effect on the increase of facilities and transportation needs. One of the primary problems is the availability of parking area. This has occurred in Universitas Indonesia (UI), mainly in Salemba Campus. The availability of land is not as equal as the number of vehicles, which are to be parked, that is why the convenience of students, lecturers and employees at UI is unsatisfactory. The purpose of this paper is to know the level of parking convenience that is affected by the capacity of parking lots and the volume of vehicles in UI Salemba Campus. The results of this research indicate Salemba campus's parking index. The motor index is still in the category of medium (index 0.945) and the car parking index has less category with a parking index 0.485. While with the location of research object being behind the UI Salemba campus, the results obtained were both the motor and the car are still in the category of “enough” with the parking index of, that is 0.657 for the motor and 0.777 for the car. So theoretically, the parking management at Salemba Campus is in an unsustainable parking degree because, if there is no long-term solution, it will increase congestion in the surrounding area and intensify the dissatisfaction of existing parking users.

  19. Use of Lot Quality Assurance Sampling to Ascertain Levels of Drug Resistant Tuberculosis in Western Kenya.

    Science.gov (United States)

    Jezmir, Julia; Cohen, Ted; Zignol, Matteo; Nyakan, Edwin; Hedt-Gauthier, Bethany L; Gardner, Adrian; Kamle, Lydia; Injera, Wilfred; Carter, E Jane

    2016-01-01

    To classify the prevalence of multi-drug resistant tuberculosis (MDR-TB) in two different geographic settings in western Kenya using the Lot Quality Assurance Sampling (LQAS) methodology. The prevalence of drug resistance was classified among treatment-naïve smear positive TB patients in two settings, one rural and one urban. These regions were classified as having high or low prevalence of MDR-TB according to a static, two-way LQAS sampling plan selected to classify high resistance regions at greater than 5% resistance and low resistance regions at less than 1% resistance. This study classified both the urban and rural settings as having low levels of TB drug resistance. Out of the 105 patients screened in each setting, two patients were diagnosed with MDR-TB in the urban setting and one patient was diagnosed with MDR-TB in the rural setting. An additional 27 patients were diagnosed with a variety of mono- and poly- resistant strains. Further drug resistance surveillance using LQAS may help identify the levels and geographical distribution of drug resistance in Kenya and may have applications in other countries in the African Region facing similar resource constraints.

  20. Use of Lot Quality Assurance Sampling (LQAS) to estimate vaccination coverage helps guide future vaccination efforts.

    Science.gov (United States)

    Alberti, K P; Guthmann, J P; Fermon, F; Nargaye, K D; Grais, R F

    2008-03-01

    Inadequate evaluation of vaccine coverage after mass vaccination campaigns, such as used in national measles control programmes, can lead to inappropriate public health responses. Overestimation of vaccination coverage may leave populations at risk, whilst underestimation can lead to unnecessary catch-up campaigns. The problem is more complex in large urban areas where vaccination coverage may be heterogeneous and the programme may have to be fine-tuned at the level of geographic subunits. Lack of accurate population figures in many contexts further complicates accurate vaccination coverage estimates. During the evaluation of a mass vaccination campaign carried out in N'Djamena, the capital of Chad, Lot Quality Assurance Sampling was used to estimate vaccination coverage. Using this method, vaccination coverage could be evaluated within smaller geographic areas of the city as well as for the entire city. Despite the lack of accurate population data by neighbourhood, the results of the survey showed heterogeneity of vaccination coverage within the city. These differences would not have been identified using a more traditional method. The results can be used to target areas of low vaccination coverage during follow-up vaccination activities.