WorldWideScience

Sample records for production costs

  1. Production cost methods and data

    Science.gov (United States)

    Jeffe, R. E.; Fujita, T.

    1975-01-01

    The general gas cost equation for utility financing is presented. Modifications and assumptions made in order to apply the cost equation to hydrogen production are described. Cost data are given for various methods of hydrogen production. The cost matrix procedure is briefly discussed.

  2. RECTIFIED ETHANOL PRODUCTION COST ANALYSIS

    Directory of Open Access Journals (Sweden)

    Nikola J Budimir

    2011-01-01

    Full Text Available This paper deals with the impact of the most important factors of the total production costs in bioethanol production. The most influential factors are: total investment costs, price of raw materials (price of biomass, enzymes, yeast, and energy costs. Taking into account these factors, a procedure for estimation total production costs was establish. In order to gain insight into the relationship of production and selling price of bioethanol, price of bioethanol for some countries of the European Union and the United States are given.

  3. Nuclear power production costs

    International Nuclear Information System (INIS)

    Erramuspe, H.J.

    1988-01-01

    The economic competitiveness of nuclear power in different highly developed countries is shown, by reviewing various international studies made on the subject. Generation costs (historical values) of Atucha I and Embalse Nuclear Power Plants, which are of the type used in those countries, are also included. The results of an international study on the economic aspects of the back end of the nuclear fuel cycle are also reviewed. This study shows its relatively low incidence in the generation costs. The conclusion is that if in Argentina the same principles of economic racionality were followed, nuclear energy would be economically competitive in the future, as it is today. This is of great importance in view of its almost unavoidable character of alternative source of energy, and specially since we have to expect an important growth in the consumption of electricity, due to its low share in the total consumption of energy, and the low energy consumption per capita in Argentina. (Author) [es

  4. Environmental costs of meat production

    DEFF Research Database (Denmark)

    Nguyen, T Lan T; Hermansen, John Erik; Mogensen, Lisbeth

    2012-01-01

    This paper aims to address two questions: First, what is the real cost of meat to society if taking into account the environmental costs arising throughout the product life cycle; and second, whether and how the environmental costs related to meat production can be reduced. In addressing the issues...... to be the main contributor to the costs (55%), followed by global warming (21%) and respiratory inorganics (18%). A viable option combining improvement measures in three aspects: feed use, manure management, and manure utilization, reduces the environmental costs by a factor of 1.4. This results in an equal size......, we use pig meat production in the EU as a case study. The environmental costs of meat are displayed first as characterized results at different midpoint categories e.g. global warming, nature occupation, acidification, eutrophication, ecotoxicity, etc., and then aggregated into a single score using...

  5. Minimizing activated carbons production cost

    International Nuclear Information System (INIS)

    Stavropoulos, G.G.; Zabaniotou, A.A.

    2009-01-01

    A detailed economic evaluation of activated carbons production process from various raw materials is undertaken using the conventional economic indices (ROI, POT, and NPV). The fundamental factors that affect production cost were taken into account. It is concluded that for an attractive investment in activated carbons production one should select the raw material with the highest product yield, adopt a chemical activation production scheme and should base product price on product-surface area (or more generally on product adsorption capacity for the adsorbate in consideration). A raw material that well meets the above-mentioned criteria is petroleum coke but others are also promising (charcoals, and carbon black). Production cost then can be optimized by determining its minimum value of cost that results from the intercept between the curves of plant capacity and raw material cost - if any. Taking into account the complexity of such a techno-economic analysis, a useful suggestion could be to start the evaluations from a plant capacity corresponding to the break-even point, i. e. the capacity at which income equals production cost. (author)

  6. Designing Cost-Competitive Technology Products through Cost Management

    NARCIS (Netherlands)

    Davila, T.; Wouters, Marc

    2004-01-01

    SYNOPSIS: As manufacturing innovations spread throughout leading organizations, product development becomes a more important source of competitive advantage. Within product development, cost management receives increasing attention. To date, cost management in new product development focuses

  7. Costs of electronuclear fuel production

    International Nuclear Information System (INIS)

    Flaim, T.; Loose, V.

    1978-07-01

    The Los Alamos Scientific Laboratory (LASL) proposes to study the electronuclear fuel producer (EFP) as a means of producing fissile fuel to generate electricity. The main advantage of the EFP is that it may reduce the risks of nuclear proliferation by breeding 233 U from thorium, thereby avoiding plutonium separation. A report on the costs of electronuclear fuel production based upon two designs considered by LASL is presented. The findings indicate that the EFP design variations considered are not likely to result in electricity generation costs as low as the uranium fuel cycle used in the US today. At current estimates of annual fuel output (500 kg 233 U per EFP), the costs of electricity generation using fuel produced by the EFP are more than three times higher than generating costs using the traditional fuel cycle. Sensitivity analysis indicates that electronuclear fuel production would become cost competitive with the traditional uranium fuel cycle when U 3 O 8 (yellowcake) prices approach $1000 per pound

  8. On production costs in vertical differentiation models

    OpenAIRE

    Dorothée Brécard

    2009-01-01

    In this paper, we analyse the effects of the introduction of a unit production cost beside a fixed cost of quality improvement in a duopoly model of vertical product differentiation. Thanks to an original methodology, we show that a low unit cost tends to reduce product differentiation and thus prices, whereas a high unit cost leads to widen product differentiation and to increase prices

  9. Product costing program for wood component manufacturers

    Science.gov (United States)

    Adrienn Andersch; Urs Buehlmann; Jeff Palmer; Janice K Wiedenbeck; Steve. Lawser

    2013-01-01

    Accurate and timely product costing information is critically important for companies in planning the optimal utilization of company resources. While an overestimation of product costs can lead to loss of potential business and market share, underestimation of product costs can result in financial losses to the company. This article introduces a product costing program...

  10. Determination production costs using PBC method

    Directory of Open Access Journals (Sweden)

    Todić Vladimir V.

    2014-01-01

    Full Text Available Basic characteristics of modern markets make requirements in quality increasing, decreasing prices and shortening delivery of products. In the middle of this requirements are production costs for whose determination are developed many traditional and alternative methods including PBC method (Process Based Costing. This method enables precisely locating and calculating indirect production costs, and with determined direct costs enables determination of total production costs. This paper shows usage of PBC method for determination production costs for three forms of processing cutting tools.

  11. The ''reference costs'' of the electrical production

    International Nuclear Information System (INIS)

    1997-05-01

    This study objective is to give an aid for the investments choice in the field of electricity production and for national choices in the field of long-dated production. Important evolutions appeared since the last exercise ''reference costs'' of 1993. Electricity production costs, presented in this study, are actualized economic costs. They consider the following production facilities: nuclear, pulverized coal with fumes processing, circulating fluidized bed, combustion turbines, cogeneration and wind turbines. (A.L.B.)

  12. Cost Accounting: Production and Equipment Services.

    Science.gov (United States)

    Schmid, William T.

    Cost accounting for audiovisual productions should include direct costs, and, in some cases, the media administrator may have to calculate a per-hour surcharge for general operating overhead as well. Such procedures enable the administrator to determine cost effectiveness, to control cost overruns, and to generate more staff efficiency. Cost…

  13. Cost Optimization of Product Families using Analytic Cost Models

    DEFF Research Database (Denmark)

    Brunø, Thomas Ditlev; Nielsen, Peter

    2012-01-01

    This paper presents a new method for analysing the cost structure of a mass customized product family. The method uses linear regression and backwards selection to reduce the complexity of a data set describing a number of historical product configurations and incurred costs. By reducing the data...... set, the configuration variables which best describe the variation in product costs are identified. The method is tested using data from a Danish manufacturing company and the results indicate that the method is able to identify the most critical configuration variables. The method can be applied...... in product family redesign projects focusing on cost reduction to identify which modules contribute the most to cost variation and should thus be optimized....

  14. Cost Decision Support in Product Design

    NARCIS (Netherlands)

    Liebers, A.; Kals, H.J.J.

    1997-01-01

    The constraints addressed in decision making during product design, process planning and production planning determine the admissible solution space for the manufacture of products. The solution space determines largely the costs that are incurred in the production process. In order to be able to

  15. Economic costs of electricity production in Poland

    International Nuclear Information System (INIS)

    Beeldman, M.; Solinski, J.

    1994-02-01

    This study presents a methodology for the calculation of the economic costs of the production of electricity. This methodology is applied to assess electricity production cost in Poland by type of power station for the years 1995 and 2000. In addition, an overview is presented of the methods used by the OECD countries, particularly in the Netherlands. The main conclusions of the study are: 1) the real economic costs to generate electricity in Poland are about two times higher compared with the traditional book-keeping data; 2) the investment costs will become the most important cost component in the near future; and 3) there are considerables differences in production cost per kWh for the different types of power plants in Poland. 4 appendices, 14 refs

  16. Production costs for SRIC Populus biomass

    International Nuclear Information System (INIS)

    Strauss, C.H.

    1991-01-01

    Production costs for short rotation, intensive culture (SRIC) Populus biomass were developed from commercial-sized plantations under investigation throughout the US. Populus hybrid planted on good quality agricultural sites at a density of 850 cuttings/acre was projected to yield an average of 7 ovendry (OD) tons/acre/year. Discounted cash-flow analysis of multiple rotations showed preharvest production costs of $14/ton (OD). Harvesting and transportation expenses would increase the delivered cost to $35/ton (OD). Although this total cost compared favorably with the regional market price for aspen (Populus tremuloides), future investments in SRIC systems will require the development of biomass energy markets

  17. 17 CFR 229.1204 - (Item 1204) Oil and gas production, production prices and production costs.

    Science.gov (United States)

    2010-04-01

    ... production, production prices and production costs. 229.1204 Section 229.1204 Commodity and Securities... production, production prices and production costs. (a) For each of the last three fiscal years disclose... production cost, not including ad valorem and severance taxes, per unit of production. Instruction 1 to Item...

  18. Lamb Production Costs: Analyses of Composition and Elasticities Analysis of Lamb Production Costs

    Directory of Open Access Journals (Sweden)

    C. Raineri

    2015-08-01

    Full Text Available Since lamb is a commodity, producers cannot control the price of the product they sell. Therefore, managing production costs is a necessity. We explored the study of elasticities as a tool for basing decision-making in sheep production, and aimed at investigating the composition and elasticities of lamb production costs, and their influence on the performance of the activity. A representative sheep production farm, designed in a panel meeting, was the base for calculation of lamb production cost. We then performed studies of: i costs composition, and ii cost elasticities for prices of inputs and for zootechnical indicators. Variable costs represented 64.15% of total cost, while 21.66% were represented by operational fixed costs, and 14.19% by the income of the factors. As for elasticities to input prices, the opportunity cost of land was the item to which production cost was more sensitive: a 1% increase in its price would cause a 0.2666% increase in lamb cost. Meanwhile, the impact of increasing any technical indicator was significantly higher than the impact of rising input prices. A 1% increase in weight at slaughter, for example, would reduce total cost in 0.91%. The greatest obstacle to economic viability of sheep production under the observed conditions is low technical efficiency. Increased production costs are more related to deficient zootechnical indexes than to high expenses.

  19. Estimating the cost of production stoppage

    Science.gov (United States)

    Delionback, L. M.

    1979-01-01

    Estimation model considers learning curve quantities, and time of break to forecast losses due to break in production schedule. Major parameters capable of predicting costs are number of units made prior to production sequence, length of production break, and slope of learning curve produced prior to break.

  20. Predicting Production Costs for Advanced Aerospace Vehicles

    Science.gov (United States)

    Bao, Han P.; Samareh, J. A.; Weston, R. P.

    2002-01-01

    For early design concepts, the conventional approach to cost is normally some kind of parametric weight-based cost model. There is now ample evidence that this approach can be misleading and inaccurate. By the nature of its development, a parametric cost model requires historical data and is valid only if the new design is analogous to those for which the model was derived. Advanced aerospace vehicles have no historical production data and are nowhere near the vehicles of the past. Using an existing weight-based cost model would only lead to errors and distortions of the true production cost. This paper outlines the development of a process-based cost model in which the physical elements of the vehicle are soared according to a first-order dynamics model. This theoretical cost model, first advocated by early work at MIT, has been expanded to cover the basic structures of an advanced aerospace vehicle. Elemental costs based on the geometry of the design can be summed up to provide an overall estimation of the total production cost for a design configuration. This capability to directly link any design configuration to realistic cost estimation is a key requirement for high payoff MDO problems. Another important consideration in this paper is the handling of part or product complexity. Here the concept of cost modulus is introduced to take into account variability due to different materials, sizes, shapes, precision of fabrication, and equipment requirements. The most important implication of the development of the proposed process-based cost model is that different design configurations can now be quickly related to their cost estimates in a seamless calculation process easily implemented on any spreadsheet tool.

  1. THE COST OF PRODUCTION UNDER DIRECT COSTING AND ABSORPTION COSTING – A COMPARATIVE APPROACH

    Directory of Open Access Journals (Sweden)

    Bunea-Bontaş Cristina Aurora

    2013-04-01

    Full Text Available Managerial accounting has an important role in strategic management of a company, being designed especially for managers, in order to optimise their decision regarding operating activities. One of the objectives of managerial accounting is the cost calculation, for measuring inventory costs, and the costs and profitability of products and services. Cost calculation systems can vary in terms of which costs are assigned to cost objects, two significant calculation systems being adopted by the costing theory: full cost accounting, which includes all costs of production as product costs, and partial cost accounting, which includes only those costs that vary with output. This article provides a comparative approach regarding the differences between the calculation of the cost of production under direct costing and absorption costing. It also examines the implication of using each of these calculation systems on the financial position and financial performance of the companies reported on the statement of financial position and the income statement. Finally, the advantages of using direct costing for internal reporting are discussed, considering that this method is not acceptable for external reporting to stockholders and other external users.

  2. Cost allocation. Combined heat and power production

    International Nuclear Information System (INIS)

    Sidzikauskas, V.

    2002-01-01

    The benefits of Combined Heat and Power (CHP) generation are discussed. The include improvement in energy intensity of 1% by 2010, 85-90% efficiency versus 40-50% of condensation power and others. Share of CHP electricity production in ERRA countries is presented.Solutions for a development CHP cost allocation are considered. Conclusion are presented for CHP production cost allocation. (R.P.)

  3. Examining the production costs of antiretroviral drugs.

    Science.gov (United States)

    Pinheiro, Eloan; Vasan, Ashwin; Kim, Jim Yong; Lee, Evan; Guimier, Jean Marc; Perriens, Joseph

    2006-08-22

    To present direct manufacturing costs and price calculations of individual antiretroviral drugs, enabling those responsible for their procurement to have a better understanding of the cost structure of their production, and to indicate the prices at which these antiretroviral drugs could be offered in developing country markets. Direct manufacturing costs and factory prices for selected first and second-line antiretroviral drugs were calculated based on cost structure data from a state-owned company in Brazil. Prices for the active pharmaceutical ingredients (API) were taken from a recent survey by the World Health Organization (WHO). The calculated prices for antiretroviral drugs are compared with quoted prices offered by privately-owned, for-profit manufacturers. The API represents the largest component of direct manufacturing costs (55-99%), while other inputs, such as salaries, equipment costs, and scale of production, have a minimal impact. The calculated prices for most of the antiretroviral drugs studied fall within the lower quartile of the range of quoted prices in developing country markets. The exceptions are those drugs, primarily for second-line therapy, for which the API is either under patent, in short supply, or in limited use in developing countries (e.g. abacavir, lopinavir/ritonavir, nelfinavir, saquinavir). The availability of data on the cost of antiretroviral drug production and calculation of factory prices under a sustainable business model provide benchmarks that bulk purchasers of antiretroviral drugs could use to negotiate lower prices. While truly significant price decreases for antiretroviral drugs will depend largely on the future evolution of API prices, the present study demonstrates that for several antiretroviral drugs price reduction is currently possible. Whether or not these reductions materialize will depend on the magnitude of indirect cost and profit added by each supplier over the direct production costs. The ability to

  4. Quality costs in the production process

    OpenAIRE

    J. Michalska

    2006-01-01

    Purpose: The aim of this paper is showing the relationship of the quality costs with a production process. In this paper it was worked out and introduced the way of marking the documents with regard to the quality costs.Design/methodology/approach: In the frames of own research it has been analysed the quality costs in the production process from the documents marked using the worked out way of marking.Findings: On the basis of the own research it can be stated, that the majority of the eleme...

  5. Environmental costs of fossil fuel energy production

    International Nuclear Information System (INIS)

    Riva, A.; Trebeschi, C.

    1997-01-01

    The costs of environmental impacts caused by fossil fuel energy production are external to the energy economy and normally they are not reflected in energy prices. To determine the environmental costs associated with an energy source a detailed analysis of all environmental impacts of the complete energy cycle is required. The economic evaluation of environmental damages is presented caused by atmospheric emissions produced by fossil fuel combustion for different uses. Considering the emission factors of sulphur oxides, nitrogen oxides, dust and carbon dioxide and the economic evaluation of their environmental damages reported in literature, a range of environmental costs associated with different fossil fuels and technologies is presented. A comparison of environmental costs resulting from atmospheric emissions produced by fossil-fuel combustion for energy production shows that natural gas has a significantly higher environmental value than other fossil fuels. (R.P.)

  6. Production costs of liquid fuels from biomass

    International Nuclear Information System (INIS)

    Bridgwater, A.V.; Double, J.M.

    1994-01-01

    This project was undertaken to provide a consistent and thorough review of the full range of processes for producing liquid fuels from biomass to compare both alternative technologies and processes within those technologies in order to identify the most promising opportunities that deserve closer attention. Thermochemical conversion includes both indirect liquefaction through gasification, and direct liquefaction through pyrolysis and liquefaction in pressurized solvents. Biochemical conversion is based on a different set of feedstocks. Both acid and enzyme hydrolysis are included followed by fermentation. The liquid products considered include gasoline and diesel hydrocarbons and conventional alcohol fuels of methanol and ethanol. Results are given both as absolute fuel costs and as a comparison of estimated cost to market price. In terms of absolute fuel costs, thermochemical conversion offers the lowest cost products, with the least complex processes generally having an advantage. Biochemical routes are the least attractive. The most attractive processes from comparing production costs to product values are generally the alcohol fuels which enjoy a higher market value. (author)

  7. [Productivity costs of rheumatoid arthritis in Germany. Cost composition and prediction of main cost components].

    Science.gov (United States)

    Merkesdal, S; Huelsemann, J L; Mittendorf, T; Zeh, S; Zeidler, H; Ruof, J

    2006-10-01

    Identification of predictors for the productivity cost components: (1) sick leave, and (2) work disability in gainfully employed and (3) impaired household productivity in unemployed patients with rheumatoid arthritis (RA) from the societal perspective. Investigation of productivity costs was linked to a multicenter, randomized, controlled trial evaluating the effectiveness of clinical quality management in 338 patients with RA. The productivity losses were assessed according to the German Guidelines on Health Economic Evaluation. By means of multivariate logistic regression analyses, predictors of sick leave, work disability (employed patients, n=96), and for days confined to bed in unemployed patient (n=242) were determined. Mean annual costs of 970 EUR arose per person taking into consideration all patients (453 EUR sick leave, 63 EUR work disability, 454 EUR impaired productivity of unemployed patients). Disease activity, disease severity, and impaired physical function were global predictors for all of the cost components investigated. Sick leave costs were predicted by prior sick leave periods and the vocational status blue collar worker, work disability costs by sociodemographic variables (marital status, schooling), and the productivity costs of unemployed patients by impaired mental health and impaired physical functions. Interventions such as reduction in disease progression and control of disease activity, early vocational rehabilitation measures and vocational retraining in patients at risk of quitting working life, and self-management programs to learn coping strategies might decrease future RA-related productivity costs.

  8. Reference costs of the electric power production

    International Nuclear Information System (INIS)

    2003-06-01

    This study periodically realized by the DGEMP aims to compare the competitiveness of the different channels of electric power production, for different utilization conditions. The first part ''reference costs of the 2003 electric power production'' examines the prices of the electric power produced by different channels in particular in the framework of the industrial implementing in 2015. The nuclear and thermal power plants are concerned. The second part is devoted to the decentralized production channels (wind energy, photovoltaic, cogeneration heat-electricity) is under construction and will be presented next year. (A.L.B.)

  9. Project feasibility and mine production costs

    Energy Technology Data Exchange (ETDEWEB)

    Longworth, C R

    1987-01-01

    The paper outlines the present investment environment existing in the Australian Coal Industry and places this in the context of the current world seaborne coal trade. Those factors which have the greatest influence on the viability of coal projects today, namely coal prices and quality, exchange rates, cash cost of production, capital and borrowing costs, infrastructure and government charges are dealt with briefly. The paper concludes by giving a schedule of those factors of a local character which can be changed to render projects more competitive and also presents some external factors beyond Australia's control which will, in part, influence the development of the industry in the next decade. 4 refs., 8 figs.

  10. Current U.S. uranium production costs

    International Nuclear Information System (INIS)

    Steyn, J.J.; Douglas, R.F.

    1989-01-01

    The U.S. uranium industry has undergone significant changes in the 1980s. These changes have come about largely as a result of the much slower growth of nuclear power than that initially anticipated and the deployment of an excess uranium supply capacity by 1979. The demand and supply imbalance has led to a substantial build-up in excess inventories which will not be remedied until well into the 1990s. At the same time as domestic inventories were building, large low cost uranium deposits were being discovered and developed in Canada and Australia. Additionally, in the past year or so it has become apparent that low cost uranium from the Soviet Union and the Peoples Republic of China will increasingly become a factor in the marketplace. The soft demand, large inventories, and competitive imports, stimulated by the recently ratified U.S.-Canada Free Trade Agreement, have caused the U.S. uranium industry to contract to one-tenth of its size ten years ago, if employment is taken at the gage. In light of the foregoing, this paper examines the current U.S. uranium production cost outlook for the 1990s. It is based on a direct cost analysis of all identifiable uranium deposits, mines, and production centers

  11. Valuing productivity costs in a changing macroeconomic environment: the estimation of colorectal cancer productivity costs using the friction cost approach.

    Science.gov (United States)

    Hanly, Paul; Koopmanschap, Marc; Sharp, Linda

    2016-06-01

    The friction cost approach (FCA) has been proposed as an alternative to the human capital approach for productivity cost valuation. However, FCA estimates are context dependent and influenced by extant macroeconomic conditions. We applied the FCA to estimate colorectal cancer labor productivity costs and assessed the impact of a changing macroeconomic environment on these estimates. Data from colorectal cancer survivors (n = 159) derived from a postal survey undertaken in Ireland March 2010 to January 2011 were combined with national wage data, population-level survival data, and occupation-specific friction periods to calculate temporary and permanent disability, and premature mortality costs using the FCA. The effects of changing labor market conditions between 2006 and 2013 on the friction period were modeled in scenario analyses. Costs were valued in 2008 euros. In the base-case, the total FCA per-person productivity cost for incident colorectal cancer patients of working age at diagnosis was €8543. In scenario 1 (a 2.2 % increase in unemployment), the fall in the friction period caused total productivity costs to decrease by up to 18 % compared to base-case estimates. In scenario 2 (a 9.2 % increase in unemployment), the largest decrease in productivity cost was up to 65 %. Adjusting for the vacancy rate reduced the effect of unemployment on the cost results. The friction period used in calculating labor productivity costs greatly affects the derived estimates; this friction period requires reassessment following changes in labor market conditions. The influence of changes in macroeconomic conditions on FCA-derived cost estimates may be substantial.

  12. Cost reduction in deep water production systems

    International Nuclear Information System (INIS)

    Beltrao, R.L.C.

    1995-01-01

    This paper describes a cost reduction program that Petrobras has conceived for its deep water field. Beginning with the Floating Production Unit, a new concept of FPSO was established where a simple system, designed to long term testing, can be upgraded, on the location, to be the definitive production unit. Regarding to the subsea system, the following projects will be considered. (1) Subsea Manifold: There are two 8-well-diverless manifolds designed for 1,000 meters presently under construction and after a value analysis, a new design was achieved for the next generation. Both projects will be discussed and a cost evaluation will also be provided. (2) Subsea Pipelines: Petrobras has just started a large program aiming to reduce cost on this important item. There are several projects such as hybrid (flexible and rigid) pipes for large diameter in deep water, alternatives laying methods, rigid riser on FPS, new material...etc. The authors intend to provide an overview of each project

  13. External costs of electricity production under scrutiny

    International Nuclear Information System (INIS)

    Wagner, H.J.; Melchert, A.

    1993-01-01

    After a short introduction into the problems and questions surrounding the issue of external costs Chapter 2 presents the most important results of the studies under review and analysis in this work. Occasionally, minor discrepancies were found between the results given in the summary of a study and the data reported in the relevant chapters. Chapter 3 identifies and discusses differences in perspective between the studies under consideration. Chapter 4 analyses the most important premises and parameters adopted in the studies for the calculation of overall costs and net benefits of the different modes of electricity production. This serves to probe the reliability of the data, plausibility of the premises, and nature of the presupposed relationships. Chapter 5 examines the relationships of time assumed in the studies and gives a first comment on the more advanced Prognos study. Chapter 6, finally, offers a summarizing evaluation. (orig./UA) [de

  14. Cost-saving production technologies and partial ownership

    OpenAIRE

    Juan Carlos Barcena-Ruiz; Norma Olaizola

    2007-01-01

    This work analyzes the incentives to acquire cost-saving production technologies when cross-participation exists at ownership level. We show that cross-participation reduces the incentives to adopt the cost-saving production technology.

  15. Allocation base of general production costs as optimization of prime costs

    Directory of Open Access Journals (Sweden)

    Levytska I.O.

    2017-03-01

    Full Text Available Qualified management aimed at optimizing financial results is the key factor in today's society. Effective management decisions depend on the necessary information about the costs of production process in all its aspects – their structure, types, accounting policies of reflecting costs. General production costs, the so-called indirect costs that are not directly related to the production process, but provide its functioning in terms of supporting structural divisions and create the necessary conditions of production, play a significant role in calculating prime costs of goods (works, services. However, the accurate estimate of prime costs of goods (works, services should be determined with the value of indirect costs (in other words, general production costs, and properly determined with the base of their allocation. The choice of allocation base of general production costs is the significant moment, depending on the nature of business, which must guarantee fair distribution regarding to the largest share of direct expenses in the total structure of production costs. The study finds the essence of general production costs based on the analysis of key definitions of leading Ukrainian economists. The optimal allocation approach of general production costs is to calculate these costs as direct production costs within each subsidiary division (department separately without selecting a base as the main one to the their total amount.

  16. Lean Manufacturing Implementation: an Approach to Reduce Production Cost

    Directory of Open Access Journals (Sweden)

    Iraswari

    2012-04-01

    Full Text Available Abstract: Lean Manufacturing Implementation: An Approach To Reduce Production Cost. Opportunities to improve production processes and reduce production cost through the implementation of lean manufacturing in small medium garment manufacturing are presented in this research. This research shows that there is a possibility of decrease in production cost and increase in return on sales. Lean manufacturing implementation can eliminate waste in the production process. This is a set of techniques for identification and elimination of waste gathered from The Ford Production, Statistical Process Control and other techniques. Improvement of quality could be carried out while time and cost of production are being reduced.

  17. Methodological aspects of accounting production cost of public sector entities

    Directory of Open Access Journals (Sweden)

    Людмила Геннадіївна Ловінська

    2015-09-01

    Full Text Available The necessity of obtaining objective information about the activities of the public sector in various areas of the production is defined. It is proved an expediency of development the Project of «Guidelines for the structure of production costs» on the basis of the approved in the public sector NP(SAPS 135 "Costs". The need for accounting costs by type of activity (operational, financial and investment is marked. The composition of production costs is defined

  18. Establishing a cost model when estimating product cost in early design phases

    OpenAIRE

    Jeppsson, Johanna; Sjöberg, Jessica

    2017-01-01

    About 75% of the total product cost is determined in the early design phase, which means that the possibilities to affect costs are relatively small when the design phase is completed. For companies, it is therefore vital to conduct reliable cost estimates in the early design phase, when selecting between different design choices. When conducting a cost estimate there are many uncertainties. The aim with this study is therefore to explore how uncertainties regarding product cost can be consid...

  19. A cost analysis: processing maple syrup products

    Science.gov (United States)

    Neil K. Huyler; Lawrence D. Garrett

    1979-01-01

    A cost analysis of processing maple sap to syrup for three fuel types, oil-, wood-, and LP gas-fired evaporators, indicates that: (1) fuel, capital, and labor are the major cost components of processing sap to syrup; (2) wood-fired evaporators show a slight cost advantage over oil- and LP gas-fired evaporators; however, as the cost of wood approaches $50 per cord, wood...

  20. ECONOMIC ELEMENTS REGARDING THE STEEL COST PRODUCTION COUNTING

    OpenAIRE

    Adrian IOANA; Nicolae CONSTANTIN; Elena-Claudia DRAGNA; Massimo POLIFRONI

    2016-01-01

    Our article features the elements that make up the cost of production. The economic activity implies a consumption of factors followed-up by products expressed in goods or services. In the first part of the article, we have defined and detailed the cost of production. In the second part we have calculated the cost of the production of one tone of low alloyed steel with vanadium. The prices for the components of cost production have been established within, Tenaris site, located in Calarasi co...

  1. ECONOMIC ELEMENTS REGARDING THE STEEL COST PRODUCTION COUNTING

    Directory of Open Access Journals (Sweden)

    Adrian IOANA

    2016-08-01

    Full Text Available Our article features the elements that make up the cost of production. The economic activity implies a consumption of factors followed-up by products expressed in goods or services. In the first part of the article, we have defined and detailed the cost of production. In the second part we have calculated the cost of the production of one tone of low alloyed steel with vanadium. The prices for the components of cost production have been established within, Tenaris site, located in Calarasi county, Romania.

  2. Productivity costs in economic evaluations: past, present, future.

    Science.gov (United States)

    Krol, Marieke; Brouwer, Werner; Rutten, Frans

    2013-07-01

    Productivity costs occur when the productivity of individuals is affected by illness, treatment, disability or premature death. The objective of this paper was to review past and current developments related to the inclusion, identification, measurement and valuation of productivity costs in economic evaluations. The main debates in the theory and practice of economic evaluations of health technologies described in this review have centred on the questions of whether and how to include productivity costs, especially productivity costs related to paid work. The past few decades have seen important progress in this area. There are important sources of productivity costs other than absenteeism (e.g. presenteeism and multiplier effects in co-workers), but their exact influence on costs remains unclear. Different measurement instruments have been developed over the years, but which instrument provides the most accurate estimates has not been established. Several valuation approaches have been proposed. While empirical research suggests that productivity costs are best included in the cost side of the cost-effectiveness ratio, the jury is still out regarding whether the human capital approach or the friction cost approach is the most appropriate valuation method to do so. Despite the progress and the substantial amount of scientific research, a consensus has not been reached on either the inclusion of productivity costs in economic evaluations or the methods used to produce productivity cost estimates. Such a lack of consensus has likely contributed to ignoring productivity costs in actual economic evaluations and is reflected in variations in national health economic guidelines. Further research is needed to lessen the controversy regarding the estimation of health-related productivity costs. More standardization would increase the comparability and credibility of economic evaluations taking a societal perspective.

  3. Increased accuracy of cost-estimation using product configuration systems

    DEFF Research Database (Denmark)

    Rasmussen, Jeppe Bredahl; Hvam, Lars; Mortensen, Niels Henrik

    This article describes an approach for utilizing Product Configuration Systems (PCS) for quantifying project costs in project-based companies. It presents a case study demonstrating a method of quantifying costs in a way that makes it possible to configure cost- and time estimates. Piecework costs......, material costs and sub-supplier costs are used as principle cost elements and linked to structural and process elements to facilitate configuration. The cost data are used by the PCS to generate fast and accurate cost-estimates, quotations, time estimates and cost summaries. The described cost...... quantification principles have been used in a Scandinavian SME (Small and Medium-sized Enterprise) since the 90’s, but have since 2011 been adopted to be used in a configuration system. A longitudinal case study was conducted to compare cost and time-estimation accuracy before and after implementation. We...

  4. 75 FR 16575 - Railroad Cost Recovery Procedures-Productivity Adjustment

    Science.gov (United States)

    2010-04-01

    ...)] Railroad Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board. ACTION: Adoption of a railroad cost recovery procedures productivity adjustment. SUMMARY: By decision served on February 1, 2010, the Board proposed to adopt 1.010 (1.0% per year) as the 2008 productivity adjustment, as...

  5. 75 FR 5170 - Railroad Cost Recovery Procedures-Productivity Adjustment

    Science.gov (United States)

    2010-02-01

    ...)] Railroad Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board, DOT. ACTION: Proposed Railroad Cost Recovery Procedures Productivity Adjustment. SUMMARY: In a decision served... railroad productivity for the 2004-2008 (5-year) averaging period. This is a decline of 0.5 of a percentage...

  6. 77 FR 7237 - Railroad Cost Recovery Procedures-Productivity Adjustment

    Science.gov (United States)

    2012-02-10

    ... Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board. ACTION: Proposed railroad cost recovery procedures productivity adjustment. SUMMARY: In a decision served on... productivity for the 2006-2010 (5-year) averaging period. This represents a 0.6% decrease over the average for...

  7. 78 FR 10262 - Railroad Cost Recovery Procedures-Productivity Adjustment

    Science.gov (United States)

    2013-02-13

    ... Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board, DOT. ACTION: Proposed railroad cost recovery procedures productivity adjustment. SUMMARY: In a decision served on... productivity for the 2007-2011 (5-year) averaging period. This represents a 0.1% increase over the average for...

  8. FORMALIZING PRODUCT COST DISTORTION: The Impact of Volume-Related Allocation Bases on Cost Information

    Directory of Open Access Journals (Sweden)

    Johnny Jermias

    2003-09-01

    Full Text Available The purpose o f this study is to formally analyze product cost distortions resulting from the process of allocating costs to products based on Activity-Based Costing (ABC and the conventional product costing systems. The model developed in this paper rigorously shows the impact of treating costs that are not volume related as if they are. The model demonstrates that the source of product cost distortion is the difference between the proportion of driver used by each product in ABC and the proportion of the base used by the same product in the conventional costing systems. The difference arises because the conventional costing systems ignore the existence of batch-related and product-related costs. The model predicts a positive association between volume and size diversity with product cost distortions. When interaction between volume and size diversity exists, the distortion is either mitigated or exacerbated. The magnitude of the distortion is jointly determined by the size of the differences and the size of the total indirect costs.

  9. Low-cost high purity production

    Science.gov (United States)

    Kapur, V. K.

    1978-01-01

    Economical process produces high-purity silicon crystals suitable for use in solar cells. Reaction is strongly exothermic and can be initiated at relatively low temperature, making it potentially suitable for development into low-cost commercial process. Important advantages include exothermic character and comparatively low process temperatures. These could lead to significant savings in equipment and energy costs.

  10. Transaction costs and social networks in productivity measurement

    DEFF Research Database (Denmark)

    Henningsen, Geraldine; Henningsen, Arne; Henning, Christian H. C. A.

    2015-01-01

    and support. Hence, we use measures of a firm’s access to social networks as a proxy for the transaction costs the firm faces. We develop a microeconomic production model that takes into account transaction costs and networks. Using a data set of 384 Polish farms, we empirically estimate this model......We argue that in the presence of transaction costs, observed productivity measures may in many cases understate the true productivity, as production data seldom distinguish between resources entering the production process and resources of a similar type that are sacrificed for transaction costs....... Hence, both the absolute productivity measures and, more importantly, the productivity ranking will be distorted. A major driver of transaction costs is poor access to information and contract enforcement assistance. Social networks often catalyse information exchange as well as generate trust...

  11. Production Cost Efficiency and Profitability of Abakaliki Rice in ...

    African Journals Online (AJOL)

    acer

    2014-11-17

    Nov 17, 2014 ... positive and significant effect on the total cost of rice production. They were all significant ... failure is experienced due to the flooded rice field. In addition ... for random effects on production beyond the control .... Standard error.

  12. Cost management and cross-functional communication through product architectures

    NARCIS (Netherlands)

    Zwerink, Ruud; Wouters, Marc; Hissel, Paul; Kerssens-van Drongelen, I.C.

    2007-01-01

    Product architecture decisions regarding, for example, product modularity, component commonality, and design re-use, are important for balancing costs, responsiveness, quality, and other important business objectives. Firms are challenged with complex tradeoffs between competing design priorities,

  13. Estimating productivity costs using the friction cost approach in practice: a systematic review.

    Science.gov (United States)

    Kigozi, Jesse; Jowett, Sue; Lewis, Martyn; Barton, Pelham; Coast, Joanna

    2016-01-01

    The choice of the most appropriate approach to valuing productivity loss has received much debate in the literature. The friction cost approach has been proposed as a more appropriate alternative to the human capital approach when valuing productivity loss, although its application remains limited. This study reviews application of the friction cost approach in health economic studies and examines how its use varies in practice across different country settings. A systematic review was performed to identify economic evaluation studies that have estimated productivity costs using the friction cost approach and published in English from 1996 to 2013. A standard template was developed and used to extract information from studies meeting the inclusion criteria. The search yielded 46 studies from 12 countries. Of these, 28 were from the Netherlands. Thirty-five studies reported the length of friction period used, with only 16 stating explicitly the source of the friction period. Nine studies reported the elasticity correction factor used. The reported friction cost approach methods used to derive productivity costs varied in quality across studies from different countries. Few health economic studies have estimated productivity costs using the friction cost approach. The estimation and reporting of productivity costs using this method appears to differ in quality by country. The review reveals gaps and lack of clarity in reporting of methods for friction cost evaluation. Generating reporting guidelines and country-specific parameters for the friction cost approach is recommended if increased application and accuracy of the method is to be realized.

  14. Economic Indicators of the Farm Sector. Costs of Production, 1986.

    Science.gov (United States)

    Economic Research Service (USDA), Washington, DC.

    This report contains 121 tables that estimate the costs of production of various commodities on United States farms in 1986. The report first assesses costs and returns on a per-unit basis, such as one acre or one animal, under three sections of a budget: cash receipts, cash expenses, and economic costs. The budgets are based on national…

  15. The contemporary art of cost management methods during product development

    NARCIS (Netherlands)

    Wouters, M.; Morales, S.; Epstein, M.J.; Lee, J.Y.

    2014-01-01

    Purpose To provide an overview of research published in the management accounting literature on methods for cost management in new product development, such as a target costing, life cycle costing, component commonality, and modular design. Methodology/approach The structured literature search

  16. Productivity Costs in Patients with Refractory Chronic Rhinosinusitis

    Science.gov (United States)

    Rudmik, Luke; Smith, Timothy L.; Schlosser, Rodney J.; Hwang, Peter H.; Mace, Jess C.; Soler, Zachary M.

    2014-01-01

    Objective Disease-specific reductions in patient productivity can lead to substantial economic losses to society. The purpose of this study was to: 1) define the annual productivity cost for a patient with refractory chronic rhinosinusitis (CRS) and 2) evaluate the relationship between degree of productivity cost and CRS-specific characteristics. Study Design Prospective, multi-institutional, observational cohort study. Methods The human capital approach was used to define productivity costs. Annual absenteeism, presenteeism, and lost leisure time was quantified to define annual lost productive time (LPT). LPT was monetized using the annual daily wage rates obtained from the 2012 US National Census and the 2013 US Department of Labor statistics. Results A total of 55 patients with refractory CRS were enrolled. The mean work days lost related to absenteeism and presenteeism was 24.6 and 38.8 days per year, respectively. A total of 21.2 household days were lost per year related to daily sinus care requirements. The overall annual productivity cost was $10,077.07 per patient with refractory CRS. Productivity costs increased with worsening disease-specific QoL (r=0.440; p=0.001). Conclusion Results from this study have demonstrated that the annual productivity cost associated with refractory CRS is $10,077.07 per patient. This substantial cost to society provides a strong incentive to optimize current treatment protocols and continue evaluating novel clinical interventions to reduce this cost. PMID:24619604

  17. Productivity costs in patients with refractory chronic rhinosinusitis.

    Science.gov (United States)

    Rudmik, Luke; Smith, Timothy L; Schlosser, Rodney J; Hwang, Peter H; Mace, Jess C; Soler, Zachary M

    2014-09-01

    Disease-specific reductions in patient productivity can lead to substantial economic losses to society. The purpose of this study was to: 1) define the annual productivity cost for a patient with refractory chronic rhinosinusitis (CRS) and 2) evaluate the relationship between degree of productivity cost and CRS-specific characteristics. Prospective, multi-institutional, observational cohort study. The human capital approach was used to define productivity costs. Annual absenteeism, presenteeism, and lost leisure time was quantified to define annual lost productive time (LPT). LPT was monetized using the annual daily wage rates obtained from the 2012 U.S. National Census and the 2013 U.S. Department of Labor statistics. A total of 55 patients with refractory CRS were enrolled. The mean work days lost related to absenteeism and presenteeism were 24.6 and 38.8 days per year, respectively. A total of 21.2 household days were lost per year related to daily sinus care requirements. The overall annual productivity cost was $10,077.07 per patient with refractory CRS. Productivity costs increased with worsening disease-specific QoL (r = 0.440; p = 0.001). Results from this study have demonstrated that the annual productivity cost associated with refractory CRS is $10,077.07 per patient. This substantial cost to society provides a strong incentive to optimize current treatment protocols and continue evaluating novel clinical interventions to reduce this cost. © 2014 The American Laryngological, Rhinological and Otological Society, Inc.

  18. External costs of electricity production: recent developments

    International Nuclear Information System (INIS)

    Beutier, D.

    1995-01-01

    The external costs of energy use, or the environmental effects not included in the market pricing system, must at some point be borne by society. This paper argues that the true cost of energy, including the remedying or prevention of its environmetnal consequences, should be included in the price paid by the consumer as this is the only effective method of minimizing the burden of environmental damage. The difficulties of quantifying the value of such damage and internalising it within power prices is described with reference to work in a number of countries. (UK)

  19. Cost Estimates Of Concentrated Photovoltaic Heat Sink Production

    Science.gov (United States)

    2016-06-01

    PV), return on investment (ROI) 15. NUMBER OF PAGES 59 16. PRICE CODE 17. SECURITY CLASSIFICATION OF REPORT Unclassified 18. SECURITY...improvements increase overall system returns on investment and 11 provide pathways for further reduction in system costs (Phillips et al., 2015). Phillips...generation. As the CPV market has matured, production costs have come down to near flat-panel photovoltaic (PV) production costs. CPV units

  20. Comparison of fuel production costs for future transportation

    DEFF Research Database (Denmark)

    Ridjan, Iva; Mathiesen, Brian Vad; Connolly, David

    The purpose of this poster is to provide an overview of fuel production costs for two types of synthetic fuels – methanol and methane, along with comparable costs for first and second generation biodiesel, two types of second generation bioethanol, and biogas. The model analysed is a 100% renewable...... scenario of Denmark for 2050, where the data for the transport sector has been changed to estimate the fuel production costs for eight different fuel pathways....

  1. Unit labour costs, productivity and international competitiveness

    NARCIS (Netherlands)

    Ark, Bart van; Stuivenwold, Edwin; Ypma, Gerard

    2005-01-01

    This paper provides international comparisons of relative levels of unit labour costs (ULC) for several OECD countries relative to the United States. The estimates are based on the Total Economy Database and the 60-Industry Database of the Groningen Growth and Development Centre (GGDC), and are also

  2. Cost Functions for Airframe Production Programs.

    Science.gov (United States)

    1982-07-01

    0 : 666QOOO 66u666=6L66 𔃺" ~ JM. ~ ~ OJ M %~ 0v Z𔃾:O 14% tqv6 Z6 6 𔃺 *1 199 REFERENCES 1. Alchian, Armen A. "Costs and Outputs." In, The...Allocation of Economic Resources, Edited by Moses Abramovitz. Stanford, California: Stanford University Press, 1959. 2. Alchian, Armen A. "Reliability of

  3. Cost, production and effectiveness of masticated fireline.

    Science.gov (United States)

    Elizabeth Dodson; Dana Mitchell

    2016-01-01

    Fire managers are continuously looking for improved methods to construct fireline with minimal resource damage. One option for fireline construction that has so far received limited attention is the use of mastication equipment. This study evaluated a masticating disk mounted on a self-leveling feller- buncher for the cost, speed, and adherence to fireline...

  4. Assessing the cost saving potential of shared product architectures

    DEFF Research Database (Denmark)

    Mortensen, Niels Henrik; Hansen, Christian Lindschou; Løkkegaard, Martin

    2016-01-01

    company. Experiences from the case company show it is possible to reduce the number of architectures with 60% which leads to significant reduction in direct material and labor costs. This can be achieved without compromising the market offerings of products. Experiences from the case study indicate cost......This article presents a method for calculating cost savings of shared architectures in industrial companies called Architecture Mapping and Evaluation. The main contribution is an operational method to evaluate the cost potential and evaluate the number of product architectures in an industrial...

  5. Cogeneration Power Plants: a Proposed Methodology for Unitary Production Cost

    International Nuclear Information System (INIS)

    Metalli, E.

    2009-01-01

    A new methodology to evaluate unitary energetic production costs in the cogeneration power plants is proposed. This methodology exploits the energy conversion factors fixed by Italian Regulatory Authority for Electricity and Gas. So it allows to settle such unitary costs univocally for a given plant, without assigning them a priori subjective values when there are two or more energy productions at the same time. Moreover the proposed methodology always ensures positive values for these costs, complying with the total generation cost balance equation. [it

  6. PLACE OF PRODUCTION COSTS SYSTEM ANALYSIS IN SYSTEM ANALYSIS

    Directory of Open Access Journals (Sweden)

    Mariia CHEREDNYCHENKO

    2016-12-01

    Full Text Available Current economic conditions require the development and implementation of an adequate system of production costs, which would ensure a steady profit growth and production volumes in a highly competitive, constantly increasing input prices and tariffs. This management system must be based on an integrated production costs system analysis (PCSA, which would provide all operating costs management subsystems necessary information to design and make better management decisions. It provides a systematic analysis of more opportunities in knowledge, creating conditions of integrity mechanism knowledge object consisting of elements that show intersystem connections, each of which has its own defined and limited objectives, relationship with the environment.

  7. Reactors Save Energy, Costs for Hydrogen Production

    Science.gov (United States)

    2014-01-01

    While examining fuel-reforming technology for fuel cells onboard aircraft, Glenn Research Center partnered with Garrettsville, Ohio-based Catacel Corporation through the Glenn Alliance Technology Exchange program and a Space Act Agreement. Catacel developed a stackable structural reactor that is now employed for commercial hydrogen production and results in energy savings of about 20 percent.

  8. EFFECTIVE SAVINGS IN PRODUCTION TIMES AND COST

    African Journals Online (AJOL)

    ES OBE

    lamination process itself [5,6,7]. The purpose of this work is to fully expose, by means of experimental data, the ... takes staff to laminate such work piece (in cases of handlay-up processes) and machines. (for resin injection .... The unfinished layer of mat being laminated usually result in laminate products with rough surfaces ...

  9. Vertical governance change and product differentiation under decreasing component costs

    NARCIS (Netherlands)

    Vermeulen, B.; Huisman, K.J.M.; Kok, de A.G.

    In deciding on whether and when to outsource component production, firms should consider the trade-off between total production costs and the ability to horizontally differentiate products. We study the outsourcing decision in a duopoly under decreasing but uncertain market rates for components,

  10. Vertical governance change and product differentiation under decreasing component costs

    NARCIS (Netherlands)

    Vermeulen, B.; Huisman, K.J.M.; Kok, A.G. de

    2015-01-01

    In deciding on whether and when to outsource component production, firms should consider the trade-off between total production costs and the ability to horizontally differentiate products. We study the outsourcing decision in a duopoly under decreasing but uncertain market rates for components,

  11. The Production Effect: Costs and Benefits in Free Recall

    Science.gov (United States)

    Jones, Angela C.; Pyc, Mary A.

    2014-01-01

    The production effect, the memorial benefit for information read aloud versus silently, has been touted as a simple memory improvement tool. The current experiments were designed to evaluate the relative costs and benefits of production using a free recall paradigm. Results extend beyond prior work showing a production effect only when production…

  12. Low-cost process for hydrogen production

    Science.gov (United States)

    Cha, Chang Y.; Bauer, Hans F.; Grimes, Robert W.

    1993-01-01

    A method is provided for producing hydrogen and carbon black from hydrocarbon gases comprising mixing the hydrocarbon gases with a source of carbon and applying radiofrequency energy to the mixture. The hydrocarbon gases and the carbon can both be the products of gasification of coal, particularly the mild gasification of coal. A method is also provided for producing hydrogen an carbon monoxide by treating a mixture of hydrocarbon gases and steam with radio-frequency energy.

  13. Microalgal CO2 sequestering – Modeling microalgae production costs

    International Nuclear Information System (INIS)

    Bilanovic, Dragoljub; Holland, Mark; Armon, Robert

    2012-01-01

    Highlights: ► Microalgae production costs were modeled as a function of specific expenses. ► The effects of uncontrollable expenses/factors were incorporated into the model. ► Modeled microalgae production costs were in the range $102–1503 t −1 ha −1 y −1 . - Abstract: Microalgae CO 2 sequestering facilities might become an industrial reality if microalgae biomass could be produced at cost below $500.00 t −1 . We develop a model for estimation of total production costs of microalgae as a function of known production-specific expenses, and incorporate into the model the effects of uncontrollable factors which affect known production-specific expenses. Random fluctuations were intentionally incorporated into the model, consequently into generated cost/technology scenarios, because each and every logically interconnected equipment/operation that is used in design/construction/operation/maintenance of a production process is inevitably subject to random cost/price fluctuations which can neither be eliminated nor a priori controlled. A total of 152 costs/technology scenarios were evaluated to find 44 scenarios in which predicted total production costs of microalgae (PTPCM) was in the range $200–500 t −1 ha −1 y −1 . An additional 24 scenarios were found with PTCPM in the range of $102–200 t −1 ha −1 y −1 . These findings suggest that microalgae CO 2 sequestering and the production of commercial compounds from microalgal biomass can be economically viable venture even today when microalgae production technology is still far from its optimum.

  14. Production-Built Homes: The Cost Advantages of Smart Growth

    Science.gov (United States)

    This study identifies the components and techniques of home building in traditional versus conventional developments, and attempts to help production builders better understand the cost differences between the two types of developments.

  15. Low-Cost Production of Photonic Bandgap Materials Through Bubbling

    National Research Council Canada - National Science Library

    O'Brien, Daniel J; Wetzel, Eric D

    2007-01-01

    .... This report proposes a simple low-cost method for PBGM production. A device has been constructed that produces micrometer-sized, monodisperse bubbles that can be assembled into a crystal lattice by surface tension...

  16. Impact of timber production and transport costs on stand management

    Science.gov (United States)

    Chris B. LeDoux; Chris B. LeDoux

    1988-01-01

    Evaluates the impact of cable logging technology, transportation network standards, and transport vehicles on stand management. Managers can use results to understand the impact of timber production costs on eastern hardwood management.

  17. Transaction costs and social networks in productivity measurement

    DEFF Research Database (Denmark)

    Henningsen, Geraldine; Henningsen, Arne; Henning, Christian H. C. A.

    2015-01-01

    . Hence, both the absolute productivity measures and, more importantly, the productivity ranking will be distorted. A major driver of transaction costs is poor access to information and contract enforcement assistance. Social networks often catalyse information exchange as well as generate trust...... and support. Hence, we use measures of a firm’s access to social networks as a proxy for the transaction costs the firm faces. We develop a microeconomic production model that takes into account transaction costs and networks. Using a data set of 384 Polish farms, we empirically estimate this model...... and compare different parametric, semiparametric, and nonparametric model specifications. Our results generally support our hypothesis. Especially, large trading networks and dense household networks have a positive influence on a farm’s productivity. Furthermore, our results indicate that transaction costs...

  18. Cost-efficiency of animal welfare in broiler production systems

    NARCIS (Netherlands)

    Gocsik, Éva; Brooshooft, Suzanne D.; Jong, de Ingrid C.; Saatkamp, Helmut W.

    2016-01-01

    Broiler producers operate in a highly competitive and cost-price driven environment. In addition, in recent years the societal pressure to improve animal welfare (AW) in broiler production systems is increasing. Hence, from an economic and decision making point of view, the cost-efficiency of

  19. Fixed export costs and multi-product firms

    NARCIS (Netherlands)

    Creusen, H.; Smeets, R.

    2011-01-01

    This paper has two aims. First, we uncover some salient components of fixed export costs, which play a crucial role in recent heterogeneous firms models of international trade. Second, we investigate whether the importance of these fixed export costs varies with the size of a firms export product

  20. Productivity and Cost Comparison of Two Different-Sized Skidders

    Science.gov (United States)

    John Klepac; Robert B. Rummer

    2000-01-01

    Productivity and cost of two skidders, Timberjack models 460 and 660, were evaluated while operatin in a loblolly pine plantation performin a clearcut harvest in the Southeastern US. Productivity without delimbing was 46.7 tonnes per PMH for the model 460 and 51.7 tonnes per PMH for the model 660. Cost per tonne was $1.70 for the model 460 and $1.90 for the model 660....

  1. Preliminary Cost Estimates for Nuclear Hydrogen Production: HTSE System

    International Nuclear Information System (INIS)

    Yang, K. J.; Lee, K. Y.; Lee, T. H.

    2008-01-01

    KAERI is now focusing on the research and development of the key technologies required for the design and realization of a nuclear hydrogen production system. As a preliminary study of cost estimates for nuclear hydrogen systems, the hydrogen production costs of the nuclear energy sources benchmarking GTMHR and PBMR are estimated in the necessary input data on a Korean specific basis. G4-ECONS was appropriately modified to calculate the cost for hydrogen production of HTSE (High Temperature Steam Electrolysis) process with VHTR (Very High Temperature nuclear Reactor) as a thermal energy source. The estimated costs presented in this paper show that hydrogen production by the VHTR could be competitive with current techniques of hydrogen production from fossil fuels if CO 2 capture and sequestration is required. Nuclear production of hydrogen would allow large-scale production of hydrogen at economic prices while avoiding the release of CO 2 . Nuclear production of hydrogen could thus become the enabling technology for the hydrogen economy. The major factors that would affect the cost of hydrogen were also discussed

  2. Production costs of the Mexican poultry and pig sector

    OpenAIRE

    Horne, van, Peter; Hoste, Robert; Wagenberg, van, Coen

    2018-01-01

    Wageningen Economic Research conducted a study on the potential consequences of a free trade agreement between Mexico and the EU. The Dutch government is concerned that giving access to products from countries with a lower level of animal welfare could undermine the EU welfare standard. This study shows that production costs are lower in Mexico compared to the EU in all three sectors investigated: egg production, poultry meat and pig meat. In egg production in particular, the welfare standard...

  3. APPLICABILITY OF ACTIVITY BASED COSTING IN NEW PRODUCT DEVELOPMENT PROCESSES

    Directory of Open Access Journals (Sweden)

    Ewa Wanda MARUSZEWSKA

    2015-01-01

    Full Text Available The purpose of the article is to emphasis that activity based costing is a proper tool for engineers to enhance their deci-sion-making process while developing new product. The theoretical analysis shows that variety of factors shall be en-compassed into new product decision-making process and therefore engineers and management should pay great attention to proper cost allocation. The paper suggests the usage of Activity Based Costing methodology for new product development decision-making process. Author states that application ABC in the process of rational decision-making referring to new product development enables managers and engineers to prioritize possible solutions, and reallocate resources used in production process in order to meet wider organizational goals. It would also contribute in coopera-tion of managers and engineers for the sake of organizational goal.

  4. Hydrogen Production Cost Estimate Using Biomass Gasification: Independent Review

    Energy Technology Data Exchange (ETDEWEB)

    Ruth, M.

    2011-10-01

    This independent review is the conclusion arrived at from data collection, document reviews, interviews and deliberation from December 2010 through April 2011 and the technical potential of Hydrogen Production Cost Estimate Using Biomass Gasification. The Panel reviewed the current H2A case (Version 2.12, Case 01D) for hydrogen production via biomass gasification and identified four principal components of hydrogen levelized cost: CapEx; feedstock costs; project financing structure; efficiency/hydrogen yield. The panel reexamined the assumptions around these components and arrived at new estimates and approaches that better reflect the current technology and business environments.

  5. Final Report: Hydrogen Production Pathways Cost Analysis (2013 – 2016)

    Energy Technology Data Exchange (ETDEWEB)

    James, Brian David [Strategic Analysis Inc., Arlington, VA (United States); DeSantis, Daniel Allan [Strategic Analysis Inc., Arlington, VA (United States); Saur, Genevieve [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2016-09-30

    This report summarizes work conducted under a three year Department of Energy (DOE) funded project to Strategic Analysis, Inc. (SA) to analyze multiple hydrogen (H2) production technologies and project their corresponding levelized production cost of H2. The analysis was conducted using the H2A Hydrogen Analysis Tool developed by the DOE and National Renewable Energy Laboratory (NREL). The project was led by SA but conducted in close collaboration with the NREL and Argonne National Laboratory (ANL). In-depth techno-economic analysis (TEA) of five different H2 production methods was conducted. These TEAs developed projections for capital costs, fuel/feedstock usage, energy usage, indirect capital costs, land usage, labor requirements, and other parameters, for each H2 production pathway, and use the resulting cost and system parameters as inputs into the H2A discounted cash flow model to project the production cost of H2 ($/kgH2). Five technologies were analyzed as part of the project and are summarized in this report: Proton Exchange Membrane technology (PEM), High temperature solid oxide electrolysis cell technology (SOEC), Dark fermentation of biomass for H2 production, H2 production via Monolithic Piston-Type Reactors with rapid swing reforming and regeneration reactions, and Reformer-Electrolyzer-Purifier (REP) technology developed by Fuel Cell Energy, Inc. (FCE).

  6. Time Domain Partitioning of Electricity Production Cost Simulations

    Energy Technology Data Exchange (ETDEWEB)

    Barrows, C. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hummon, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jones, W. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hale, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-01-01

    Production cost models are often used for planning by simulating power system operations over long time horizons. The simulation of a day-ahead energy market can take several weeks to compute. Tractability improvements are often made through model simplifications, such as: reductions in transmission modeling detail, relaxation of commitment variable integrality, reductions in cost modeling detail, etc. One common simplification is to partition the simulation horizon so that weekly or monthly horizons can be simulated in parallel. However, horizon partitions are often executed with overlap periods of arbitrary and sometimes zero length. We calculate the time domain persistence of historical unit commitment decisions to inform time domain partitioning of production cost models. The results are implemented using PLEXOS production cost modeling software in an HPC environment to improve the computation time of simulations while maintaining solution integrity.

  7. Vector Production in an Academic Environment: A Tool to Assess Production Costs

    Science.gov (United States)

    Boeke, Aaron; Doumas, Patrick; Reeves, Lilith; McClurg, Kyle; Bischof, Daniela; Sego, Lina; Auberry, Alisha; Tatikonda, Mohan

    2013-01-01

    Abstract Generating gene and cell therapy products under good manufacturing practices is a complex process. When determining the cost of these products, researchers must consider the large number of supplies used for manufacturing and the personnel and facility costs to generate vector and maintain a cleanroom facility. To facilitate cost estimates, the Indiana University Vector Production Facility teamed with the Indiana University Kelley School of Business to develop a costing tool that, in turn, provides pricing. The tool is designed in Microsoft Excel and is customizable to meet the needs of other core facilities. It is available from the National Gene Vector Biorepository. The tool allows cost determinations using three different costing methods and was developed in an effort to meet the A21 circular requirements for U.S. core facilities performing work for federally funded projects. The costing tool analysis reveals that the cost of vector production does not have a linear relationship with batch size. For example, increasing the production from 9 to18 liters of a retroviral vector product increases total costs a modest 1.2-fold rather than doubling in total cost. The analysis discussed in this article will help core facilities and investigators plan a cost-effective strategy for gene and cell therapy production. PMID:23360377

  8. Low-cost production of solar-cell panels

    Science.gov (United States)

    Bickler, D. B.; Gallagher, B. D.; Sanchez, L. E.

    1980-01-01

    Large-scale production model combines most modern manufacturing techniques to produce silicon-solar-cell panels of low costs by 1982. Model proposes facility capable of operating around the clock with annual production capacity of 20 W of solar cell panels.

  9. Cost effective pilot scale production of biofertilizer using Rhizobium ...

    African Journals Online (AJOL)

    We standardized the protocol for pilot scale production of Rhizobium and Azotobacter biofertilizer technology using region specific and environmental stress compatible strains isolated from various agro climatic regions of Odisha, India. The cost benefit of biofertilizer production through a cottage industry is also presented.

  10. Utilization and cost of log production from animal loging operations

    Science.gov (United States)

    Suraj P. Shrestha; Bobby L. Lanford; Robert B. Rummer; Mark Dubois

    2006-01-01

    Forest harvesting with animals is a labor-intensive operation. It is expensive to use machines on smaller woodlots, which require frequent moves if mechanically logged. So, small logging systems using animals may be more cost effective. In this study, work sampling was used for five animal logging operations in Alabama to measure productive and non-productive time...

  11. Cost and Return Analysis of Ginger Production in the Guinea ...

    African Journals Online (AJOL)

    The study focuses on the cost and return analysis of ginger production in the guinea savannah agro ecology of Nigeria. The study is aimed at highlighting the profitability of ginger production with a view to informing and influencing farmers and relevant stakeholders. The study was conducted at Kajuru, Kaduna state in the ...

  12. MANUFACTURING PRICES, PRODUCTIVITY, AND LABOR COSTS IN 5 ECONOMIES

    NARCIS (Netherlands)

    VANARK, B

    The United States continues to surge ahead of other major industrial economies in terms of lower prices, higher levels of labor productivity, and better unit labor cost performance; while the depreciation of the dollar plays an important role, real productivity gains are important as well.

  13. Workplace smoking related absenteeism and productivity costs in Taiwan.

    Science.gov (United States)

    Tsai, S P; Wen, C P; Hu, S C; Cheng, T Y; Huang, S J

    2005-06-01

    To estimate productivity losses and financial costs to employers caused by cigarette smoking in the Taiwan workplace. The human capital approach was used to calculate lost productivity. Assuming the value of lost productivity was equal to the wage/salary rate and basing the calculations on smoking rate in the workforce, average days of absenteeism, average wage/salary rate, and increased risk and absenteeism among smokers obtained from earlier research, costs due to smoker absenteeism were estimated. Financial losses caused by passive smoking, smoking breaks, and occupational injuries were calculated. Using a conservative estimate of excess absenteeism from work, male smokers took off an average of 4.36 sick days and male non-smokers took off an average of 3.30 sick days. Female smokers took off an average of 4.96 sick days and non-smoking females took off an average of 3.75 sick days. Excess absenteeism caused by employee smoking was estimated to cost USD 178 million per annum for males and USD 6 million for females at a total cost of USD 184 million per annum. The time men and women spent taking smoking breaks amounted to nine days per year and six days per year, respectively, resulting in reduced output productivity losses of USD 733 million. Increased sick leave costs due to passive smoking were approximately USD 81 million. Potential costs incurred from occupational injuries among smoking employees were estimated to be USD 34 million. Financial costs caused by increased absenteeism and reduced productivity from employees who smoke are significant in Taiwan. Based on conservative estimates, total costs attributed to smoking in the workforce were approximately USD 1032 million.

  14. The model for estimation production cost of embroidery handicraft

    Science.gov (United States)

    Nofierni; Sriwana, IK; Septriani, Y.

    2017-12-01

    Embroidery industry is one of type of micro industry that produce embroidery handicraft. These industries are emerging in some rural areas of Indonesia. Embroidery clothing are produce such as scarves and clothes that show cultural value of certain region. The owner of an enterprise must calculate the cost of production before making a decision on how many products are received from the customer. A calculation approach to production cost analysis is needed to consider the feasibility of each order coming. This study is proposed to design the expert system (ES) in order to improve production management in the embroidery industry. The model will design used Fuzzy inference system as a model to estimate production cost. Research conducted based on survey and knowledge acquisitions from stakeholder of supply chain embroidery handicraft industry at Bukittinggi, West Sumatera, Indonesia. This paper will use fuzzy input where the quality, the complexity of the design and the working hours required and the result of the model are useful to manage production cost on embroidery production.

  15. The cost of productivity losses associated with allergic rhinitis.

    Science.gov (United States)

    Crystal-Peters, J; Crown, W H; Goetzel, R Z; Schutt, D C

    2000-03-01

    To measure the cost of absenteeism and reduced productivity associated with allergic rhinitis. The National Health Interview Survey (NHIS) was used to obtain information on days lost from work and lost productivity due to allergic rhinitis. Wage estimates for occupations obtained from the Bureau of Labor Statistics (BLS) were used to calculate the costs. Productivity losses associated with a diagnosis of allergic rhinitis in the 1995 NHIS were estimated to be $601 million. When additional survey information on the use of sedating over-the-counter (OTC) allergy medications, as well as workers' self-assessments of their reduction in at-work productivity due to allergic rhinitis, were considered, the estimated productivity loss increased dramatically. At-work productivity losses were estimated to range from $2.4 billion to $4.6 billion. Despite the inherent difficulty of measuring productivity losses, our lowest estimate is several times higher than previous estimates of the indirect medical costs associated with allergic rhinitis treatment. The most significant productivity losses resulted not from absenteeism but from reduced at-work productivity associated with the use of sedating OTC antihistamines.

  16. A roadmap for cost-of-goods planning to guide economic production of cell therapy products.

    Science.gov (United States)

    Lipsitz, Yonatan Y; Milligan, William D; Fitzpatrick, Ian; Stalmeijer, Evelien; Farid, Suzanne S; Tan, Kah Yong; Smith, David; Perry, Robert; Carmen, Jessica; Chen, Allen; Mooney, Charles; Fink, John

    2017-12-01

    Cell therapy products are frequently developed and produced without incorporating cost considerations into process development, contributing to prohibitively costly products. Herein we contextualize individual process development decisions within a broad framework for cost-efficient therapeutic manufacturing. This roadmap guides the analysis of cost of goods (COG) arising from tissue procurement, material acquisition, facility operation, production, and storage. We present the specific COG considerations related to each of these elements as identified through a 2013 International Society for Cellular Therapy COG survey, highlighting the differences between autologous and allogeneic products. Planning and accounting for COG at each step in the production process could reduce costs, allowing for more affordable market pricing to improve the long-term viability of the cell therapy product and facilitate broader patient access to novel and transformative cell therapies. Copyright © 2017 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

  17. Cost of Maple Sap Production for Various Size Tubing Operations

    Science.gov (United States)

    Niel K. Huyler

    2000-01-01

    Reports sap production costs for small (500 to 1,000 taps), medium (1,000 to 5,000), and large (5,000 to 15,000) maple syrup operations that use plastic tubing with vacuum pumping. The average annual operating cost per tap ranged from $4.64 for a 500-tap sugarbush operation to $1.84 for a sugarbush with 10,000 taps. The weighted average was $2.87 per tap or $11.48 per...

  18. Cost Effective Technologies and Renewable Substrates for Biosurfactants’ Production

    Directory of Open Access Journals (Sweden)

    Ibrahim M Banat

    2014-12-01

    Full Text Available Diverse types of microbial surface-active amphiphilic molecules are produced by a range of microbial communities. The extraordinary properties of biosurfactant / bioemulsifier (BS/BE as surface active products allows them to have key roles in various field of applications such as bioremediation, biodegradation, enhanced oil recovery, pharmaceutics, food processing among many others. This leads to a vast number of potential applications of these BS/BE in different industrial sectors. Despite the huge number of reports and patents describing BS and BE applications and advantages, commercialization of these compounds remain difficult, costly and to a large extent irregular. This is mainly due to the usage of chemically synthesized media for growing producing microorganism and in turn the production of preferred quality products. It is important to note that although a number of developments have taken place in the field of biosurfactant industries, large scale production remains economically challenging for many types of these products. This is mainly due to the huge monetary difference between the investment and achievable productivity from the commercial point of view. This review discusses low cost, renewable raw substrates and fermentation technology in BS/BE production processes and their role in reducing the production cost.

  19. Electric plant cost and power production expenses 1990

    International Nuclear Information System (INIS)

    1992-06-01

    Electric Plant Cost and Power Production Expenses is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA); US Department of Energy. This publication presents electric utility statistics on power production expenses and construction costs of electric generating plants. Data presented here are intended to provide information to the electric utility industry, educational institutions, Federal, State, and local governments, and the general public. These data are collected and published to fulfill data collection and dissemination responsibilities of the Energy Information Administration (EIA), as specified in the Federal Energy Administration Act (Public Law 93-275), as amended

  20. Electric plant cost and power production expenses 1991

    International Nuclear Information System (INIS)

    1993-01-01

    Electric Plant Cost and Power Production Expenses is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels (CNEAF); Energy Information Administration (EIA); US Department of Energy. This publication presents electric utility statistics on power production expenses and construction costs of electric generating plants. Data presented here are intended to provide information to the electric utility industry, educational institutions, Federal, State, and local governments, and the general public. These data are collected and published to fulfill data collection and dissemination responsibilities of the Energy Information Administration (EIA), as specified in the Federal Energy Administration Act (Public Law 93-275), as amended

  1. Low cost manned Mars mission based on indigenous propellant production

    Science.gov (United States)

    Bruckner, A. P.; Cinnamon, M.; Hamling, S.; Mahn, K.; Phillips, J.; Westmark, V.

    1993-01-01

    The paper describes a low-cost approach to the manned exploration of Mars (which involves an unmanned mission followed two years later by a manned mission) based on near-term technologies and in situ propellant production. Particular attention is given to the basic mission architecture and its major components, including the orbital analysis, the unmanned segment, the Earth Return Vehicle, the aerobrake design, life sciences, guidance, communications, power, propellant production, the surface rovers, and Mars science. Also discussed are the cost per mission over an assumed 8-yr initiative.

  2. Cost of product functions using analysis of value

    Directory of Open Access Journals (Sweden)

    Luminita Parv

    2016-09-01

    Full Text Available The value of use is a specific notion but of a great generality that makes the product be regarded as a complex system that transforms itself in time, thus undergoing evolution. Therefore, the product is important not in itself, but for the sake of the requirements it satisfies and for the functions it provides. In the analysis of value there are connections of a technical nature that implicitly lead to connections of an economic nature. Thus, the method of the ”analysis of value” will actually examine the cost of product functions, the aim of the method being the balance of functions costs on the basis of their importance for the product. Identifying the functions represents one of the important stages of the analysis of value. The difficulty in fixing the functions derives from the fact that there are not any rules clear enough for this activity, but only principles

  3. Hydrogen Production Costs of Various Primary Energy Sources

    International Nuclear Information System (INIS)

    Choi, Jae Hyuk; Tak, Nam Il; Kim, Yong Hee; Park, Won Seok

    2005-11-01

    Many studies on the economical aspects of hydrogen energy technologies have been conducted with the increase of the technical and socioeconomic importance of the hydrogen energy. However, there is still no research which evaluates the economy of hydrogen production from the primary energy sources in consideration of Korean situations. In this study, the hydrogen production costs of major primary energy sources are compared in consideration of the Korean situations such as feedstock price, electricity rate, and load factor. The evaluation methodology is based on the report of the National Academy of Science (NAS) of U.S. The present study focuses on the possible future technology scenario defined by NAS. The scenario assumes technological improvement that may be achieved if present research and development (R and D) programs are successful. The production costs by the coal and natural gas are 1.1 $/kgH 2 and 1.36 $/kgH 2 , respectively. However, the fossil fuels are susceptible to the price variation depending on the oil and the raw material prices, and the hydrogen production cost also depends on the carbon tax. The economic competitiveness of the renewable energy sources such as the wind, solar, and biomass are relatively low when compared with that of the other energy sources. The estimated hydrogen production costs from the renewable energy sources range from 2.35 $/kgH 2 to 6.03 $/kgH 2 . On the other hand, the production cost by nuclear energy is lower than that of natural gas or coal when the prices of the oil and soft coal are above $50/barrel and 138 $/ton, respectively. Taking into consideration the recent rapid increase of the oil and soft coal prices and the limited fossil resource, the nuclear-hydrogen option appears to be the most economical way in the future

  4. Product costing practices in the North American hardwood component industry

    Science.gov (United States)

    Adrienn Andersch; Urs Buehlmann; Jan Wiedenbeck; Steve Lawser

    2011-01-01

    Companies, when bidding for jobs, need to be able to price products competitively while also assuring that the necessary profitability can be achieved. These goals, competitive pricing and profitability, cannot be reliably achieved unless industry participants possess a full understanding of their company's cost structure. Competitors blame companies without...

  5. Firm Productivity and Infrastructure Costs in East Africa

    OpenAIRE

    Iimi, Atsushi; Humphrey, Richard Martin; Melibaeva, Sevara

    2015-01-01

    Infrastructure is an important driving force for economic growth. It reduces trade and transaction costs and stimulates the productivity of the economy. Africa has been lagging behind in the global manufacturing market. Among others, infrastructure is an important constraint in many African countries. Using firm-level data for East Africa, the paper reexamines the relationship between firm ...

  6. Production, Cost and Chip Characteristics of In-Woods Microchipping

    Science.gov (United States)

    J. Thompson; W. Sprinkle

    2013-01-01

    Emerging markets for biomass have increased the interest in producing microchips in the field. As a component of a large United States Department of Energy (DOE) funded project, microchipping has been trialed on a limited scale. The goal of the research was to evaluate the production, cost and chip characteristics of a mobile disc chipper configured to produce...

  7. Cost-effectiveness of ergonomic interventions in production

    NARCIS (Netherlands)

    Looze, M.P. de; Koningsveld, E.P.A.; Fritzsche, L.; O'Sullivan, L.; Levizzari, A.

    2008-01-01

    Ergonomic measures to reduce or eliminate the risks for developing musculoskeletal disorders, usually affects the performance at work as well, e.g. productivity or quality. The costs and benefits that can be associated with ergonomic measures are highly diverse in nature. Prior to investing in any

  8. Accounting of allocation of production enterprises’ overhead costs

    Directory of Open Access Journals (Sweden)

    О.V. Ivaniuta

    2016-12-01

    Full Text Available Taking into account the complexity of engineering technological cycles, the use of traditional approaches to the allocation of overhead costs at the researching enterprises is inexpedient and inefficient. The authors find out that to solve this problem it is not enough to choose only one base of allocation because the formed prime cost with such an approach will not meet the reality. That is why it is suggested to use a multilevel allocation of overhead costs. The proposed approach involves the allocation of overhead costs at the following levels: fixed and variable, with shops of main and auxiliary production, calculation stations, some orders. Each level involves the selection of individual allocation bases that are grouped on economic, technological and integrated ones.

  9. Cost minimisation of product transhipment for physical distribution management

    Directory of Open Access Journals (Sweden)

    Obioma R. Nwaogbe

    2013-11-01

    Full Text Available The objective of this study was to determine the optimal allocation of shipments (least cost of two manufactured products between depots and places of consumption. In this study, the least-cost method was used in solving the transportation algorithm using Tora 2.0 version software. The study was necessary because of the high operating costs associated with physical distribution when deliveries are not properly planned and considered with reference to alternative strategies. In contrast, significant savings can be achieved by using techniques available for determining the cheapest methods of transporting goods from several origins to several destinations. Cost minimisation is a very useful approach to the solution of transportation problems.

  10. The full costs of thermal power production in Eastern Canada

    International Nuclear Information System (INIS)

    Venema, H.D.; Barg, S.

    2003-07-01

    This study examines the public health and global warming costs associated with generating electricity with fossil fuels such as coal, oil or natural gas. A Full Cost Accounting approach was used to determine the costs for Eastern Canada. The electricity sector is chosen because it is a large emitter of air pollutants and greenhouse gases. The sector it will undergo potentially significant structural changes as Canada complies with the Kyoto Protocol. Alternative investments in nonpolluting sources of electricity should include analysis of full costs. Two types of factors are evaluated in this study: the public health costs caused by emissions of sulphur and nitrogen oxides and volatile organic carbon (VOC) in Eastern Canada, and the marginal climate change damages caused by the emissions of greenhouse gasses (GHGs) in Eastern Canada. The major contribution of this study is the application of the impact-pathway approach to power sector emissions. Recent Canadian studies have reported either the pollutant emission rates for different power generation technologies and fuels, or the health costs of ambient air pollution not specifically attributable to the power sector. This study isolates the component of air pollution attributable to the power sector and analyses its geographic distribution. It was concluded that coal-fired generation should be closely monitored because the externalities burden is the same magnitude as the marginal production cost. 77 refs., 20 tabs., 21 figs

  11. Thermo-climatic cost of the domestic consumption products

    Energy Technology Data Exchange (ETDEWEB)

    Szargut, Jan; Stanek, Wojciech [Institute of Thermal Technology, Silesian University of Technology, Konarskiego 22, 44-100 Gliwice (Poland)

    2010-02-15

    The thermo-climatic cost (TCC) expresses the cumulative emission of CO{sub 2} burdening all the steps of production processes connected with the fabrication of particular consumption products. The TCC of the considered product results from the consumption of semi-finished products and energy carriers. The TCC of hydrocarbon fuels contains three components: the immediate emission of CO{sub 2} resulting from the combustion of carbon, the TCC of delivery and processing and the TCC resulting from import of fuels. The TCC-component connected with import results from the TCC of the domestic products exported in order to gain the financial means for import. The values of the TCC can be used for the minimization of climatic damages by the selection of the production technology or the design and operation parameters of new processes. (author)

  12. Wood chip production technology and costs for fuel in Namibia

    Energy Technology Data Exchange (ETDEWEB)

    Leinonen, A.

    2007-12-15

    This work has been done in the project where the main target is to evaluate the technology and economy to use bush biomass for power production in Namibia. The project has been financed by the Ministry for Foreign Affairs of Finland and the Ministry of Agriculture, Water and Forestry of the Republic of Namibia. The target of this study is to calculate the production costs of bush chips at the power plant using the current production technology and to look possibilities to develop production technology in order to mechanize production technology and to decrease the production costs. The wood production costs are used in feasibility studies, in which the technology and economy of utilization of wood chips for power generation in 5, 10 and 20 MW electric power plants and for power generation in Van Eck coal fired power plant in Windhoek are evaluated. Field tests were made at Cheetah Conservation Farm (CCF) in Otjiwarongo region. CCF is producing wood chips for briquette factory in Otjiwarongo. In the field tests it has been gathered information about this CCF semi-mechanized wood chip production technology. Also new machines for bush biomass chip production have been tested. A new mechanized production chain has been designed on the basis of this information. The production costs for the CCF semi-mechanized and the new production chain have been calculated. The target in the moisture content to produce wood chips for energy is 20 w-%. In the semi-mechanized wood chip production chain the work is done partly manually, and the supply chain is organized into crews of 4.8 men. The production chain consists of manual felling and compiling, drying, chipping with mobile chipper and manual feeding and road transport by a tractor with two trailers. The CCF production chain works well. The chipping and road transport productivity in the semimechanized production chain is low. New production machines, such as chainsaw, brush cutter, lawn mover type cutter, rotator saw in skid

  13. Formation of initial cost of stocks of own production

    Directory of Open Access Journals (Sweden)

    Elena Krukovskiy

    2016-06-01

    Full Text Available The concept and component stocks according to national accounting standards are revealed. The procedure for forming the initial value of the stock, depending on the way they arrive at the company according to the guidelines as well as methods for evaluating stocks of own production is grounded. The methodological principles of formation of information on stocks and the disclosure of its financial statements are considered. In the article investigated the procedure of forming the original value of stocks depending on how they flow to the enterprise. Number of methods of assessment of inventory, which can be used to reflect their value in the accounting and financial reporting, and methods of evaluation of own production is characterized. Identified costs are included in the initial cost of inventories, including inventories of own production. The estimation of the definition of agricultural produce at fair value and features of its application in the enterprise is proposed by authors.

  14. Profitability indicators of milk production cost center in intensive systems of production

    Directory of Open Access Journals (Sweden)

    Glauber dos Santos

    2012-01-01

    Full Text Available The objective was to estimate some profitability indicators of dairy cost center farms with a high volume of daily production in feedlot. The Intended was also to identify the components that had the greatest influence on the operational cost. We used data from three milk systems production, with the origin of the purebred Holsteins. It was considered as a milk cost center production all expenses related in lactating and dry cows. The methodology used total cost and operating cost in profitability analysis. A production system, by presenting gross margin, net positive result, was able to produce short, medium and long term. Another production system had a positive gross margin and net, with conditions to survive in the short and medium term. Finally, the third system of production has shown a negative gross margin presenting decapitalizing and entering into debt, as revenues were not enough to pay operating expenses even effective. The component items of the effective operational cost that exercised higher “impact” cost and income from milk were, in decreasing order, the feeding, labor, miscellaneous expenses, sanitation, energy, milking, reproduction, equipment rental, BST and taxes.

  15. Internal cost control on the ecological quality of products

    Directory of Open Access Journals (Sweden)

    N.P. Syroid

    2018-04-01

    Full Text Available To improve the environmental quality of products due attention should be paid to control the processes related to environmental quality input of the product. The results of the study help to state the purpose and objectives of the control, also to define objects for internal control of operations cost of environmental quality. So, we believe that the main purpose of internal cost control on the ecological quality of products is the establishment of the correctness and legality of business operations, prevention of violations and abuses in the expenditure of natural, labour, material and financial resources to ensure the minimization of negative impact on the health of consumers and the environment. The basic objectives of internal control of expenditure are brought forward, but it should be noted that they can vary and depend on the size, structure, spheres and types of economic activity of the enterprise, the requirements of management personnel. In the process of identifying the objects of control of environmental quality it should be noted that this list is not exhaustive, but it is most relevant to highlight objects such as genetically modified organisms and waste production. Also the subjects of cost control to environmental quality, their functions and the information base for monitoring are determined. Proper organization of the process of internal cost control on the ecological quality of products would benefit from a clear documentation of transactions, timely and complete registration of accounting data in the registers, the true reflection of information in managerial financial reporting and ensure reduction of the negative impact on the health of consumers and the environment.

  16. Productivity cost due to maternal ill health in Sri Lanka.

    Directory of Open Access Journals (Sweden)

    Suneth Agampodi

    Full Text Available BACKGROUND: The global impact of maternal ill health on economic productivity is estimated to be over 15 billion USD per year. Global data on productivity cost associated with maternal ill health are limited to estimations based on secondary data. Purpose of our study was to determine the productivity cost due to maternal ill health during pregnancy in Sri Lanka. METHODS AND FINDINGS: We studied 466 pregnant women, aged 24 to 36 weeks, residing in Anuradhapura, Sri Lanka. A two stage cluster sampling procedure was used in a cross sectional design and all pregnant women were interviewed at clinic centers, using the culturally adapted Immpact tool kit for productivity cost assessment. Of the 466 pregnant women studied, 421 (90.3% reported at least one ill health condition during the pregnancy period, and 353 (83.8% of them had conditions affecting their daily life. Total incapacitation requiring another person to carry out all their routine activities was reported by 122 (26.1% of the women. In this study sample, during the last episode of ill health, total number of days lost due to absenteeism was 3,356 (32.9% of total loss and the days lost due to presenteeism was 6,832.8 (67.1% of the total loss. Of the 353 women with ill health conditions affecting their daily life, 280 (60% had coping strategies to recover loss of productivity. Of the coping strategies used to recover productivity loss during maternal ill health, 76.8% (n = 215 was an intra-household adaptation, and 22.8% (n = 64 was through social networks. Loss of productivity was 28.9 days per episode of maternal ill health. The mean productivity cost due to last episode of ill health in this sample was Rs.8,444.26 (95% CI-Rs.6888.74-Rs.9999.78. CONCLUSIONS: Maternal ill health has a major impact on household productivity and economy. The major impact is due to, generally ignored minor ailments during pregnancy.

  17. U3O8 production cost analysis study

    International Nuclear Information System (INIS)

    1978-08-01

    This report presents the User's Manual for the computer program resulting from Bechtel's uranium production cost analysis. The model incorporates engineering and financial costs of sandstone mining and milling in the western United States. It does not consider exploration costs. The model was written in Fortran V, IBM compatible. Inputs from the user are such items as: ore grades, open pit or underground mines, acid or carbonate leach, and debt/equity ratio. The user may either input the desired discounted cash flow rate of return and obtain the necessary U 3 O 8 price, or input an estimated U 3 O 8 price and obtain the resulting discounted cash flow rate of return

  18. Impact of solar energy cost on water production cost of seawater desalination plants in Egypt

    International Nuclear Information System (INIS)

    Lamei, A.; Zaag, P. van der; Munch, E.

    2008-01-01

    Many countries in North Africa and the Middle East are experiencing localized water shortages and are now using desalination technologies with either reverse osmosis (RO) or thermal desalination to overcome part of this shortage. Desalination is performed using electricity, mostly generated from fossil fuels with associated greenhouse gas emissions. Increased fuel prices and concern over climate change are causing a push to shift to alternative sources of energy, such as solar energy, since solar radiation is abundant in this region all year round. This paper presents unit production costs and energy costs for 21 RO desalination plants in the region. An equation is proposed to estimate the unit production costs of RO desalination plants as a function of plant capacity, price of energy and specific energy consumption. This equation is used to calculate unit production costs for desalinated water using photovoltaic (PV) solar energy based on current and future PV module prices. Multiple PV cells are connected together to form a module or a panel. Unit production costs of desalination plants using solar energy are compared with conventionally generated electricity considering different prices for electricity. The paper presents prices for both PV and solar thermal energy. The paper discusses at which electricity price solar energy can be considered economical to be used for RO desalination; this is independent of RO plant capacity. For countries with electricity prices of 0.09 US$/kWh, solar-generated electricity (using PV) can be competitive starting from 2 US$/W p (W p is the number of Watts output under standard conditions of sunlight). For Egypt (price of 0.06 US$/kWh), solar-generated electricity starts to be competitive from 1 US$/W p . Solar energy is not cost competitive at the moment (at a current module price for PV systems including installation of 8 US$/W p ), but advances in the technology will continue to drive the prices down, whilst penalties on usage

  19. Moly99 Production Facility: Report on Beamline Components, Requirements, Costs

    Energy Technology Data Exchange (ETDEWEB)

    Bishofberger, Kip A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-12-23

    In FY14 we completed the design of the beam line for the linear accelerator production design concept. This design included a set of three bending magnets, quadrupole focusing magnets, and octopoles to flatten the beam on target. This design was generic and applicable to multiple different accelerators if necessary. In FY15 we built on that work to create specifications for the individual beam optic elements, including power supply requirements. This report captures the specification of beam line components with initial cost estimates for the NorthStar production facility.This report is organized as follows: The motivation of the beamline design is introduced briefly, along with renderings of the design. After that, a specific list is provided, which accounts for each beamline component, including part numbers and costs, to construct the beamline. After that, this report details the important sections of the beamline and individual components. A final summary and list of follow-on activities completes this report.

  20. Alternative methods of modeling wind generation using production costing models

    International Nuclear Information System (INIS)

    Milligan, M.R.; Pang, C.K.

    1996-08-01

    This paper examines the methods of incorporating wind generation in two production costing models: one is a load duration curve (LDC) based model and the other is a chronological-based model. These two models were used to evaluate the impacts of wind generation on two utility systems using actual collected wind data at two locations with high potential for wind generation. The results are sensitive to the selected wind data and the level of benefits of wind generation is sensitive to the load forecast. The total production cost over a year obtained by the chronological approach does not differ significantly from that of the LDC approach, though the chronological commitment of units is more realistic and more accurate. Chronological models provide the capability of answering important questions about wind resources which are difficult or impossible to address with LDC models

  1. Estimating generation costs for wind power production in France

    International Nuclear Information System (INIS)

    Benazet, J.F.; Probert, E.J.

    1997-01-01

    Wind power is being exploited in several European countries as one of a possible number of sources of renewable energy. However, in France there is a heavy reliance on nuclear and hydro-electric power and the potential of wind power as part of the energy mix has been virtually ignored. One of the reasons advanced for the under utilisation of this technology is that it is financially unattractive. In this paper the contribution which wind power could potentially make to overall power production levels in France is examined. A cost estimate model is developed which derives electricity generation costs and determines realistic levels of production for the future. The model automatically determines the associated number of wind turbines required and the geographical areas in which they should be located. (author)

  2. Industrial agglomeration and production costs in Norwegian salmon aquaculture

    OpenAIRE

    Tveterås, Ragnar

    2002-01-01

    During the last decade, empirical evidence of regional agglomeration economies has emerged for some industries. This paper argues that externalities from agglomeration are not only present in some manufacturing and service sectors, but can also occur in primary industries, such as aquaculture. Econometric analyses in this literature have primarily estimated rather restrictive production function specifications on aggregated industry data. Here, cost functions are estimated o...

  3. Effects of regional agglomeration of salmon : aquaculture on production costs

    OpenAIRE

    Tveterås, Ragnar

    2001-01-01

    During the last decade empirical evidence of regional agglomeration economies has emerged for some industries. This report argues that externalities from agglomeration are not only present in some manufacturing and service sectors, but can also occur in primary industries such as aquaculture. Econometric analyses in this literature have primarily estimated production functions on aggregated industry data. Here, cost functions are estimated on firm level observations of Norwegian salmon aquacu...

  4. A REVIEW OF ESTIMATION OF SOFTWARE PRODUCTS DEVELOPMENT COSTS

    Directory of Open Access Journals (Sweden)

    Edin Osmanbegović

    2017-01-01

    Full Text Available In the modern business and management of business processes, the standardization of procedures allows the creation of added value, increasing competitiveness and success in the business of an organization. Evaluation of the budget for software development is crucial to the success of an IT project, because the inability to make a realistic assessment leads to inadequate project plans, customer dissatisfaction, poor quality of software products, and reduced profits. In order to minimize such situations, making accurate and reliable software cost estimation should be carried out at all stages of the project life cycle. Although hundreds of research articles focusing on the application of different methods of budget estimates of the software product have been published so far, there is no comprehensive review of the current situation or review of research trends in the budget estimates of the software product. This paper aims to create a framework for estimation of costs of development of software products by providing an overview of the most influential researchers, the most influential articles published in the WoS database, the most used keywords for searching the articles, as well as a review of the estimation techniques used in budget estimates of the software product.

  5. Reducing electrocoagulation harvesting costs for practical microalgal biodiesel production.

    Science.gov (United States)

    Dassey, Adam J; Theegala, Chandra S

    2014-01-01

    Electrocoagulation has shown potential to be a primary microalgae harvesting technique for biodiesel production. However, methods to reduce energy and electrode costs are still necessary for practical application. Electrocoagulation tests were conducted on Nannochloris sp. and Dunaliella sp. using perforated aluminium and iron electrodes under various charge densities. Aluminium electrodes were shown to be more efficient than iron electrodes when harvesting both algal species. Despite the lower harvesting efficiency, however, the iron electrodes were more energy and cost efficient. Operational costs of less than $0.03/L oil were achieved when harvesting Nannochloris sp. with iron electrodes at 35% harvest efficiency, whereas aluminium electrodes cost $0.75/L oil with 42% harvesting efficiency. Increasing the harvesting efficiencies for both aluminium and iron electrodes also increased the overall cost per litre of oil, therefore lower harvesting efficiencies with lower energy inputs was recommended. Also, increasing the culturing salinity to 2 ppt sodium chloride for freshwater Nannochloris sp. was determined practical to improve the electrocoagulation energy efficiency despite a 25% reduction in cell growth.

  6. Impact of product configuration systems on product profitability and costing accuracy

    DEFF Research Database (Denmark)

    Myrodia, Anna; Kristjansdottir, Katrin; Hvam, Lars

    2017-01-01

    in control of their product assortment, making the right decisions in the sales phase and increasing sales of optimal products. These benefits should have an impact on the company's ability to make more accurate cost estimations in the sales phase, which can positively affect the products’ profitability......This article aims at analyzing the impact of implementing a product configuration system (PCS) on the increased accuracy of the cost calculations and the increased profitability of the products. Companies that have implemented PCSs have achieved substantial benefits in terms of being more...... and after a PCS was implemented. The comparison in the case study revealed that increased accuracy of the cost calculations in the sales phase and consequently increased profitability can be achieved by implementing a PCS....

  7. Life cycle cost of ethanol production from cassava in Thailand

    Energy Technology Data Exchange (ETDEWEB)

    Sorapipatana, Chumnong; Yoosin, Suthamma [Joint Graduate School of Energy and Environment, King Mongkut' s University of Technology Thonburi, Pracha-Uthit Rd., Tungkru, Bangmod, Bangkok 10140 (Thailand); Center for Energy Technology and Environment, Commission on Higher Education, Ministry of Education, Bangkok (Thailand)

    2011-02-15

    To increase the security of energy supply, lessen dependence on crude oil import and buffer against the impacts of large change in crude oil prices, the Thai government initiated and officially announced the national ethanol fuel program in year 2000. Since then, domestic ethanol demand has grown rapidly. Presently, all commercial ethanol in Thailand is produced from molasses as Thai law prohibits producing it from sugar cane directly. This is likely to limit ethanol supply in the near future. One possible solution is to supply more ethanol from cassava which is widely cultivated in this country. However, its production cost has not yet been known for certain. The objective of this study is to estimate the life cycle cost of ethanol production from cassava and to assess its economic competitiveness with gasoline in the Thai fuel market. Based on the record of cassava prices during the years 2002-2005, it was found that using it as feedstock would share more than 50% of the ethanol from cassava total production cost. It was also found that a bio-ethanol plant, with a capacity of 150,000 l/day, can produce ethanol from cassava in a range of ex-factory costs from 16.42 to 20.83 baht/l of gasoline equivalent (excluding all taxes), with an average cost of 18.15 baht/l of gasoline equivalent (41, 52 and 45 US cents/l gasoline equivalent respectively, based on 2005 exchange rate). In the same years, the range of 95-octane gasoline prices in Thailand varied from 6.18 baht to 20.86 baht/l, with an average price of 11.50 baht/l (15, 52 and 29 US cents/l respectively, based on 2005 exchange rate) which were much cheaper than the costs of ethanol made from cassava. Thus, we conclude that under the scenario of low to normal crude oil price, ethanol from cassava is not competitive with gasoline. The gasoline price has to rise consistently above 18.15 baht (45 US cents)/l before ethanol made from cassava can be commercially competitive with gasoline. (author)

  8. Life cycle cost of ethanol production from cassava in Thailand

    International Nuclear Information System (INIS)

    Sorapipatana, Chumnong; Yoosin, Suthamma

    2011-01-01

    To increase the security of energy supply, lessen dependence on crude oil import and buffer against the impacts of large change in crude oil prices, the Thai government initiated and officially announced the national ethanol fuel program in year 2000. Since then, domestic ethanol demand has grown rapidly. Presently, all commercial ethanol in Thailand is produced from molasses as Thai law prohibits producing it from sugar cane directly. This is likely to limit ethanol supply in the near future. One possible solution is to supply more ethanol from cassava which is widely cultivated in this country. However, its production cost has not yet been known for certain. The objective of this study is to estimate the life cycle cost of ethanol production from cassava and to assess its economic competitiveness with gasoline in the Thai fuel market. Based on the record of cassava prices during the years 2002-2005, it was found that using it as feedstock would share more than 50% of the ethanol from cassava total production cost. It was also found that a bio-ethanol plant, with a capacity of 150,000 l/day, can produce ethanol from cassava in a range of ex-factory costs from 16.42 to 20.83 baht/l of gasoline equivalent (excluding all taxes), with an average cost of 18.15 baht/l of gasoline equivalent (41, 52 and 45 US cents/l gasoline equivalent respectively, based on 2005 exchange rate). In the same years, the range of 95-octane gasoline prices in Thailand varied from 6.18 baht to 20.86 baht/l, with an average price of 11.50 baht/l (15, 52 and 29 US cents/l respectively, based on 2005 exchange rate) which were much cheaper than the costs of ethanol made from cassava. Thus, we conclude that under the scenario of low to normal crude oil price, ethanol from cassava is not competitive with gasoline. The gasoline price has to rise consistently above 18.15 baht (45 US cents)/l before ethanol made from cassava can be commercially competitive with gasoline. (author)

  9. Production low cost plastic scintillator by using commercial polystyrene

    International Nuclear Information System (INIS)

    2011-01-01

    Plastic Scintillators can be described as solid materials which contain organic fluorescent compounds dissolved within a polymer matrix. Transparent plastics commonly used for light scintillation are Polystyrene (or PS, poly-vinyl-benzene) and polyvinyl-toluene (or PVT, poly-methyl-styron). By changing the composition of plastic Scintillators some features such as light yield, radiation hardening, decay time etc. can be controlled. Plastic scintillation detectors have been used in nuclear and high energy physics for many decades. Among their benefits are fast response, ease of manufacture and versatility. Their main drawbacks are radiation resistance and cost. Many research projects have concentrated on improving the fundamental properties of plastic scintillators, but little attention has focussed on their cost and easier manufacturing techniques. First plastic Scintillators were produced in 1950's. Activities for production of low cost Scintillators accelerated in second half of 1970's. In 1975 acrylic based Plexipop Scintillator was developed. Despite its low cost, since its structure was not aromatic the light yield of Plexipop was about one quarter of classical Scintillators. Problems arising from slow response time and weak mechanical properties in scintillators developed, has not been solved until 1980. Within the last decade extrusion method became very popular in preparation of low cost and high quality plastic scintillators. In this activity, preliminary studies for low cost plastic scintillator production by using commercial polystyrene pellets and extrusion plus compression method were aimed. For this purpose, PS blocks consist of commercial fluorescent dopant were prepared in June 2008 by use of the extruder and pres in SANAEM. Molds suitable for accoupling to extruder were designed and manufactured and optimum production parameters such as extrusion temperature profile, extrusion rate and moulding pressure were obtained hence, PS Scintillator Blocks

  10. Use of low-cost aluminum in electric energy production

    Science.gov (United States)

    Zhuk, Andrey Z.; Sheindlin, Alexander E.; Kleymenov, Boris V.; Shkolnikov, Eugene I.; Lopatin, Marat Yu.

    Suppression of the parasitic corrosion while maintaining the electrochemical activity of the anode metal is one of the serious problems that affects the energy efficiency of aluminum-air batteries. The need to use high-purity aluminum or special aluminum-based alloys results in a significant increase in the cost of the anode, and thus an increase in the total cost of energy generated by the aluminum-air battery, which narrows the range of possible applications for this type of power source. This study considers the process of parasitic corrosion as a method for hydrogen production. Hydrogen produced in an aluminum-air battery by this way may be further employed in a hydrogen-air fuel cell (Hy-air FC) or in a heat engine, or it may be burnt to generate heat. Therefore, anode materials may be provided by commercially pure aluminum, commercially produced aluminum alloys, and secondary aluminum. These materials are much cheaper and more readily available than special anode alloys of aluminum and high-purity aluminum. The aim of present study is to obtain experimental data for comparison of energy and cost parameters of some commercially produced aluminum alloys, of high-purity aluminum, and of a special Al-ln anode alloy in the context of using these materials as anodes for an Al-air battery and for combined production of electrical power and hydrogen.

  11. DEPENDENCE OF ENERGY EFFICIENCY AND COST OF PRODUCTION

    Directory of Open Access Journals (Sweden)

    D. Sklyarov

    2016-01-01

    Full Text Available Economic systems exist on condition of receipt and spending of energy. Energy consumption is a necessary condition for the existence and functioning of the economic systems of any scale: macroeconomics, microeconomics, regional economy or the world economy.The economic system operates on the scale at which it is able to produce energy and get access to energy. Moreover, receipt and consumption of energy in the operation of the economic system is mainly determined by, the level of energy production from energy sources, since this level is determined by the level of energy consumption by industries and enterprises of the economy.Currently, the economic system does not produce energy in reserve. Thus, the question of energy effi ciency and energy saving was always acute.The article describes the energy efficiency and energy saving effect on the cost of production. Were used two methods: “costs and release” matrix and “price - value added” matrix. The result is the equation of dependence of energy efficiency and costs.

  12. COSTING OF QUALITY IN BUSINESS BASE UNIT SEVERAL PRODUCTIONS, CIENFUEGOS

    Directory of Open Access Journals (Sweden)

    Gómez Alfonso, Elizabeth

    2013-01-01

    Full Text Available The calculation of quality costs as a component of the System of Quality Management, is a must for Cuban business managers, to provide a technique identified as an advanced instrument of management, which will lead to improved competitiveness and serve as an informative source. Identify and calculate the costs of quality, as well as propose measured plans, to promote a decrease in operating expenses, which can be used as a tool to improve processes. The Business Unit of Several Base Productions of Cienfuegos presents the fault to give way to Business Improvement and certification of its Quality Management System, according to the norm ISO 9001:2008 and the decree law 281, so that the objective research was to estimate the costs of quality processes in the company. To achieve this level were used empirical methods and techniques such as direct observation, document review and work in groups, which allowed to calculate the costs of quality in all processes. The results obtained are applicable to companies that operate in the Cuban economy and according to the Cuban economic model implemented from the year 2011.

  13. INTEGRATED COST MODEL FOR IMPROVING THE PRODUCTION IN COMPANIES

    Directory of Open Access Journals (Sweden)

    Zuzana Hajduova

    2014-12-01

    Full Text Available Purpose: All processes in the company play important role in ensuring functional integrated management system. We point out the importance of need for a systematic approach to the use of quantitative, but especially statistical methods for modelling the cost of the improvement activities that are part of an integrated management system. Development of integrated management systems worldwide leads towards building of systematic procedures of implementation maintenance and improvement of all systems according to the requirements of all the sides involved.Methodology: Statistical evaluation of the economic indicators of improvement costs and the need for a systematic approach to their management in terms of integrated management systems have become a key role also in the management of processes in the company Cu Drôt, a.s. The aim of this publication is to highlight the importance of proper implementation of statistical methods in the process of improvement costs management in the integrated management system of current market conditions and document the legitimacy of a systematic approach in the area of monitoring and analysing indicators of improvement with the aim of the efficient process management of company. We provide specific example of the implementation of appropriate statistical methods in the production of copper wire in a company Cu Drôt, a.s. This publication also aims to create a model for the estimation of integrated improvement costs, which through the use of statistical methods in the company Cu Drôt, a.s. is used to support decision-making on improving efficiency.Findings: In the present publication, a method for modelling the improvement process, by an integrated manner, is proposed. It is a method in which the basic attributes of the improvement in quality, safety and environment are considered and synergistically combined in the same improvement project. The work examines the use of sophisticated quantitative, especially

  14. Advanced solar concentrator mass production, operation, and maintenance cost assessment

    Science.gov (United States)

    Niemeyer, W. A.; Bedard, R. J.; Bell, D. M.

    1981-01-01

    The object of this assessment was to estimate the costs of the preliminary design at: production rates of 100 to 1,000,000 concentrators per year; concentrators per aperture diameters of 5, 10, 11, and 15 meters; and various receiver/power conversion package weights. The design of the cellular glass substrate Advanced Solar Concentrator is presented. The concentrator is an 11 meter diameter, two axis tracking, parabolic dish solar concentrator. The reflective surface of this design consists of inner and outer groups of mirror glass/cellular glass gores.

  15. The nitrogen cost of food production: Norwegian society

    Energy Technology Data Exchange (ETDEWEB)

    Azzaroli Bleken, M. [Agricultural Univ. of Norway, Aas (Norway). Dept. of Horticulture and Crop Sciences; Bakken, L.R. [Agricultural Univ. of Norway, Aas (Norway). Dept. of Soil and Water Sciences

    1997-05-01

    The N-enrichment of the biosphere due to human activities has potential global consequences in enhancing cumulatively, the emission of N{sub 2}O to the atmosphere. This aspect of nitrogen pollution demands a global analysis of the `human nitrogen cycle`. We have used Norway as an example to analyze the nitrogen flows within a society and the dissipation of N to the environment. The present paper concentrates on the food producing sector, which was found to represent the largest N-flow and had the most complex interferences within the nitrogen cycle. The edible products that reach the consumers` mouths account for around 10% of the total N inputs at the primary (plant) production level. The largest N-dissipation occurs in plant production, but the performance of the society as a whole is largely determined by the human diet. The N-cost, defined as the ratio between fertilizer N-input (including animal manure) and the N products, is around 3 for wheat, 14 for dairy products and 21 for meat. The analysis of different mitigation options also reveal the importance of recycling at the highest possible trophic level. Major reductions in the total consumption of N can be obtained by moderate changes towards a more vegetarian diet and better utilization of existing food. In contrast, recycling of waste at the lowest trophic level (compost) is very inefficient. 43 refs, 2 figs, 5 tabs

  16. Preliminary analysis about reducing production costs in uranium mining and metallurgy at Fuzhou uranium mine

    International Nuclear Information System (INIS)

    Wu Sanmao

    1999-01-01

    The production costs in uranium ming and metallurgy have been analyzed quantitatively term by term according to present production situation for The Uranium Mining and Metallurgy Corp, which is part of Fuzhou Uranium Mine. The principal factors influencing on the production costs and the main means reducing the production costs have been found

  17. Innovation in product design as a factor for reducing logistic and production costs

    Directory of Open Access Journals (Sweden)

    Luciana Fighera Marzall

    2016-03-01

    Full Text Available Innovation has been considered of fundamental importance for organizations competing in dynamic environments, which along with cost management has been shown as an organizational strategy that allows the company to measure its results and implement measures that impact on the organization's performance as a whole. This paper, carried out in a metal mechanical industry of a telecommunications engineering branch, aims to analyse cost reduction in logistics raw materials areas through innovation in the product design, which are antennas and towers for telephone networks. In terms of methodology, this study presents itself as a qualitative and quantitative research-action, which from the link between theory and practice allows for intervention in the middle of the researchers studied. As a result, an innovative project was developed, which allowed for the reduction costs of production by 68% and logistics by 32%. Despite the significant decrease in costs, the quality of manufactured products not declined and customer needs were met, thus making the company more competitive against competitors. Not widespread in the literature, this analysis of the impact on logistics and production costs due to improvements in the project is the main contribution theoretical of this paper.

  18. External costs of electricity production: case study Croatia

    International Nuclear Information System (INIS)

    Bozicevic Vrhovcak, Maja; Tomsic, Zeljko; Debrecin, Nenad

    2005-01-01

    Because electricity production is one of the major sources of pollution, and at the same time is the most centralised one, environmental issues in power system operation and planning are gaining ever-increasing attention. It is very difficult to compare environmental impacts of various electricity generation technologies and fuel types because they are extremely divergent. The most widely accepted common denominator today is the so-called external cost by which a monetary value is associated with environmental damage. In this paper, damages to human health resulting from Croatian thermal power plants annual operation are presented. Stack emissions have been translated into ambient concentrations by atmospheric dispersion modelling. Existing data on relations between human health degradation and ground concentrations of the analysed pollutants have been used. Geographic information software has been used in order to account for spatially dependent data. Monetary values have been assigned to the estimated human health damage. External costs resulting from impact of Croatian thermal power plants airborne emissions on human health have been calculated. The total Croatian thermal power system external costs, resulting from impacts on human health, are presented and discussed

  19. REDUCING ENVIRONMENTAL IMPACT AND COST OF PRODUCTION FOR DRYING FRUITS

    Directory of Open Access Journals (Sweden)

    Murad Erol

    2013-12-01

    Full Text Available To reduce the production costs for heat used in drying fruit plants was studied using of local biomass from tree branch pruning. The average annual get 3 t / ha biomass whit energy potential of 37 GJ/ha at a cost of up to 60 €/t. biomass at 10 - 50 mm chopped and dried below 20% can be gasefied with TLUD process characterized by high energy conversion efficiency, stability and safety in operation, emissions of CO and PM very low. TLUD process produces on average and 15% biochar that can be used as fuel or as agricultural amendment to increase fertility and for atmospheric carbon sequestration. There have been experiments simulated by model of USCMER 30/60MGB dryer equipped with two thermal modules TLUD FORTE-40 for apple slices drying heat of the apple prinings. Biomass used and biochar resulting chemical and energy were defined as micro-gasification process TLUD. That can dry 205 kg of apple slices in 6 hours with 74 kg of dry biomass to 10% of that remains and 12.2 kg biochar, biochar with or without 52 kg biomass, which costs € 8.55 or € 5.97, ie 4.3 or 6.1 times cheaper than diesel. On dry ton of sliced apple it can produce 59.6 kg biochar with soil seize -174.8 kg. CO2.

  20. Critical Research for Cost-Effective Photoelectrochemical Production of Hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Liwei [Midwest Optoelectronics, LLC, Toledo, OH (United States); Deng, Xunming [Univ. of Toledo, OH (United States); Abken, Anka [Midwest Optoelectronics, LLC, Toledo, OH (United States); Cao, Xinmin [Midwest Optoelectronics, LLC, Toledo, OH (United States); Du, Wenhui [Midwest Optoelectronics, LLC, Toledo, OH (United States); Vijh, Aarohi [Xunlight Corporation, Toledo, OH (United States); Ingler, William [Univ. of Toledo, OH (United States); Chen, Changyong [Univ. of Toledo, OH (United States); Fan, Qihua [Univ. of Toledo, OH (United States); Collins, Robert [Univ. of Toledo, OH (United States); Compaan, Alvin [Univ. of Toledo, OH (United States); Yan, Yanfa [Univ. of Toledo, OH (United States); Giolando, Dean [Univ. of Toledo, OH (United States); Turner, John [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-10-29

    The objective of this project is to develop critical technologies required for cost-effective production of hydrogen from sunlight and water using a-Si triple junction solar cell based photo-electrodes. In this project, Midwest Optoelectronics, LLC (MWOE) and its collaborating organizations utilize triple junction a-Si thin film solar cells as the core element to fabricate photoelectrochemical (PEC) cells. Triple junction a-Si/a-SiGe/a-SiGe solar cell is an ideal material for making cost-effective PEC system which uses sun light to split water and generate hydrogen. It has the following key features: 1) It has an open circuit voltage (Voc ) of ~ 2.3V and has an operating voltage around 1.6V. This is ideal for water splitting. There is no need to add a bias voltage or to inter-connect more than one solar cell. 2) It is made by depositing a-Si/a-SiGe/aSi-Ge thin films on a conducting stainless steel substrate which can serve as an electrode. When we immerse the triple junction solar cells in an electrolyte and illuminate it under sunlight, the voltage is large enough to split the water, generating oxygen at the Si solar cell side (for SS/n-i-p/sunlight structure) and hydrogen at the back, which is stainless steel side. There is no need to use a counter electrode or to make any wire connection. 3) It is being produced in large rolls of 3ft wide and up to 5000 ft long stainless steel web in a 25MW roll-to-roll production machine. Therefore it can be produced at a very low cost. After several years of research with many different kinds of material, we have developed promising transparent, conducting and corrosion resistant (TCCR) coating material; we carried out extensive research on oxygen and hydrogen generation catalysts, developed methods to make PEC electrode from production-grade a-Si solar cells; we have designed and tested various PEC module cases and carried out extensive outdoor testing; we were able to obtain a solar to hydrogen conversion efficiency (STH

  1. COST OF PRODUCTION, GROSS RETURN AND NET PROFIT IN COMMERCIAL EGG PRODUCTION

    Directory of Open Access Journals (Sweden)

    M. Farooq, Zahoor-ul-Haq1, M.A. Mian, F.R. Durrani and M. Syed

    2003-01-01

    Full Text Available The present study was carried out in Chakwal, Pakistan by collecting data from randomly selected 109 flocks to investigate cost of production, gross return and net profit per layer. Majority of the buildings in the study area were rented therefore, rent per layer was added to the total cost of production instead of depreciation on building and equipments. Overall total cost of production, gross return and net profit per layer was Rs. 393.88 ± 5.36, 432.14 ± 8.01 and 38.26 ± 6.66, respectively. Rate of return over the invested capital was 27%. Mean feed cost per layer was Rs. 302.23 ± 5.01, including Rs. 10.27 ± 0.24, 29.19 ± 0.42 and 262.77 ± 5.08 for starter, grower and layer ration, respectively. Feed cost was the major component contributing 76.73% to the total cost of production. Average cost of labor, day-old chick, building rent, vaccination, therapy, miscellaneous item, electricity, bedding material and transportation was Rs. 19.90 ± 0.45, 19.75 ± 0.05, 16.25 ± 0.26, 12.80 ± 0.10, 10.90 ± 2.32, 4.35 ± 0.09, 3.15 ± 0.07, 2.65 ± 0.09 and 1.90 ± 0.08, respectively, contributing 5.05, 5.01, 4.13, 3.25, 2.77, 1.10, 0.80, 0.67 and 0.48 % to the total cost of production. Gross return from the sale of marketable eggs, culled eggs, spent/culled bird, empty bags and manure was Rs. 388.84 ± 7.91, 3.85 ± 0.01, 35.80 ± 0.23, 2.20 ± 0.04 and 1.45 ± 0.01, respectively, contributing 89.98, 0.89, 8.28, 0.51 and 0.34% to the total return. Determining the effect of different parameters on the cost of production and net profit, large flocks, Hisex strain, brood-grow and lay system of rearing, good hygienic conditions of the farm, normal stocking rate and cage system of housing wee found to give maximum gross return as well as net profit.

  2. Estimation of external costs of energy production in Finland

    International Nuclear Information System (INIS)

    Estlander, A.; Otterstroem, T.

    1994-01-01

    The goal of the project is to develop a method for estimation of external costs of energy production in Finland. The purpose of the method is to take into account all the most important impacts on health, materials and the environment. The study will assess environmental effects of emissions from Finnish energy production on people and the environment locally (population centres), nationally (Finland) and globally. The different energy production forms to be included in the study are heat and electric energy generated with coal, natural gas, fuel oil and peat (not industry's energy production). Local and national environmental impact assessment is carried out within the Finnish borders. The economic influence of emissions (in particular greenhouse gases) originating outside Finland but with global impact will also be assessed, as far as Finland is concerned. When studying the amounts of emissions the whole fuel chain is taken into account: production, processing or transport, storage in the different stages of the chain of use, and end use. The main components under review are SO 2 , NO x , CO 2 , H x C y , CO, particulates and a couple of heavy metals. In addition. the study considers ozone (O 3 ), which is formed in the atmosphere. The primary monetary valuation method used is the indirect monetarization. which is based on dose-response functions and the use of both market prices and willingness-to-pay assessments. The method to be developed during the project for monetary valuation of effects caused by emissions on health, materials and the environment can be utilized in further monetarization studies. The results of the work can used to assess the profitability of energy production plants and energy companies from the economic point of view

  3. Nisin Production Utilizing Skimmed Milk Aiming to Reduce Process Cost

    Science.gov (United States)

    Jozala, Angela Faustino; de Andrade, Maura Sayuri; de Arauz, Luciana Juncioni; Pessoa, Adalberto; Penna, Thereza Christina Vessoni

    Nisin is a natural additive for conservation of food, pharmaceutical, and dental products and can be used as a therapeutic agent. Nisin inhibits the outgrowth of spores, the growth of a variety of Gram-positive and Gram-negative bacteria. This study was performed to optimize large-scale nisin production in skimmed milk and subproducts aiming at low-costs process and stimulating its utilization. Lactococcus lactis American Type Culture Collection (ATCC) 11454 was developed in a rotary shaker (30°C/36 h/100 rpm) in diluted skimmed milk and nisin activity, growth parameters, and media components were also studied. Nisin activity in growth media was expressed in arbitrary units (AU/mL) and converted to standard nisin concentration (Nisaplin®, 25 mg of pure nisin is 1.0×106 AU/mL). Nisin activity in skimmed milk 2.27 gtotal solids was up to threefold higher than transfers in skimmed milk 4.54 gtotal solids and was up to 85-fold higher than transfers in skimmed milk 1.14 gtotal solids. L. lactis was assayed in a New Brunswick fermentor with 1.5 L of diluted skimmed milk (2.27 gtotal solids) and airflow of 1.5 mL/min (30°C/36/200 rpm), without pH control. In this condition nisin activity was observed after 4 h (45.07 AU/mL) and in the end of 36 h process (3312.07 AU/mL). This work shows the utilization of a low-cost growth medium (diluted skimmed milk) to nisin production with wide applications. Furthermore, milk subproducts (milk whey) can be exploited in nisin production, because in Brazil 50% of milk whey is disposed with no treatment in rivers and because of high organic matter concentrations it is considered an important pollutant. In this particular case an optimized production of an antimicrobial would be lined up with industrial disposal recycling.

  4. 76 FR 64879 - Deduction for Qualified Film and Television Production Costs

    Science.gov (United States)

    2011-10-19

    ... Deduction for Qualified Film and Television Production Costs AGENCY: Internal Revenue Service (IRS... regulations relating to deductions for the costs of producing film and television productions. Those temporary... production costs. (a) * * * (1) * * * (ii) [The text of this proposed amendment to Sec. 1.181- 1(a)(1)(ii) is...

  5. Reference costs of the electric power production; Couts de reference de la production electrique

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-06-01

    This study periodically realized by the DGEMP aims to compare the competitiveness of the different channels of electric power production, for different utilization conditions. The first part ''reference costs of the 2003 electric power production'' examines the prices of the electric power produced by different channels in particular in the framework of the industrial implementing in 2015. The nuclear and thermal power plants are concerned. The second part is devoted to the decentralized production channels (wind energy, photovoltaic, cogeneration heat-electricity) is under construction and will be presented next year. (A.L.B.)

  6. Joint pricing and production management: a geometric programming approach with consideration of cubic production cost function

    Science.gov (United States)

    Sadjadi, Seyed Jafar; Hamidi Hesarsorkh, Aghil; Mohammadi, Mehdi; Bonyadi Naeini, Ali

    2015-06-01

    Coordination and harmony between different departments of a company can be an important factor in achieving competitive advantage if the company corrects alignment between strategies of different departments. This paper presents an integrated decision model based on recent advances of geometric programming technique. The demand of a product considers as a power function of factors such as product's price, marketing expenditures, and consumer service expenditures. Furthermore, production cost considers as a cubic power function of outputs. The model will be solved by recent advances in convex optimization tools. Finally, the solution procedure is illustrated by numerical example.

  7. Hydrogen Production Costs of Various Primary Energy Sources

    International Nuclear Information System (INIS)

    Choi, Jae Hyuk; Tak, Nam Il; Kim, Yong Hee; Park, Won Seok

    2005-01-01

    The limited resource and environmental impacts of fossil fuels are becoming more and more serious problems in the world. Consequently, hydrogen is in the limelight as a future alternative energy due to its clean combustion and inexhaustibility and a transition from the traditional fossil fuel system to a hydrogen-based energy system is under considerations. Several countries are already gearing the industries to the hydrogen economy to cope with the limitations of the current fossil fuels. Unfortunately, hydrogen has to be chemically separated from the hydrogen compounds in nature such as water by using some energy sources. In this paper, the hydrogen production costs of major primary energy sources are compared in consideration of the Korean situations. The evaluation methodology is based on the report of the National Academy of Science (NAS) of U.S

  8. Thin film silicon modules: contributions to low cost industrial production

    Energy Technology Data Exchange (ETDEWEB)

    Shah, A. [Universite de Neuchatel, Neuchatel (Switzerland)

    2005-07-01

    This final report for the Swiss Federal Office of Energy (SFOE) discusses the research work done during the two-year period 2003-04 at the Thin-Film Solar Cell Laboratory of the Institute of Microtechnology (IMT) at the University of Neuchatel in Switzerland. The transition from fundamental research work to concrete industrialisation issues, and changes within the research staff are discussed. The main results of the work done are presented, including basic techniques for the production of p-i-n solar cells on glass, new technologies for the deposition of n-i-p cells on low-cost flexible substrates and the optimisation of zinc oxide deposition methods. The key role played by substrate chemistry and roughness in the nucleation and growth of micro-crystalline silicon layers is looked at and diagnostic tools for the analysis of micro-crystalline solar cells are discussed.

  9. Breast and prostate cancer productivity costs: a comparison of the human capital approach and the friction cost approach.

    Science.gov (United States)

    Hanly, Paul; Timmons, Aileen; Walsh, Paul M; Sharp, Linda

    2012-05-01

    Productivity costs constitute a substantial proportion of the total societal costs associated with cancer. We compared the results of applying two different analytical methods--the traditional human capital approach (HCA) and the emerging friction cost approach (FCA)--to estimate breast and prostate cancer productivity costs in Ireland in 2008. Data from a survey of breast and prostate cancer patients were combined with population-level survival estimates and a national wage data set to calculate costs of temporary disability (cancer-related work absence), permanent disability (workforce departure, reduced working hours), and premature mortality. For breast cancer, productivity costs per person using the HCA were € 193,425 and those per person using the FCA were € 8,103; for prostate cancer, the comparable estimates were € 109,154 and € 8,205, respectively. The HCA generated higher costs for younger patients (breast cancer) because of greater lifetime earning potential. In contrast, the FCA resulted in higher productivity costs for older male patients (prostate cancer) commensurate with higher earning capacity over a shorter time period. Reduced working hours postcancer was a key driver of total HCA productivity costs. HCA costs were sensitive to assumptions about discount and growth rates. FCA costs were sensitive to assumptions about the friction period. The magnitude of the estimates obtained in this study illustrates the importance of including productivity costs when considering the economic impact of illness. Vastly different results emerge from the application of the HCA and the FCA, and this finding emphasizes the importance of choosing the study perspective carefully and being explicit about assumptions that underpin the methods. Copyright © 2012 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  10. Lowest cost due to highest productivity and highest quality

    Science.gov (United States)

    Wenk, Daniel

    2003-03-01

    Since global purchasing in the automotive industry has been taken up all around the world there is one main key factor that makes a TB-supplier today successful: Producing highest quality at lowest cost. The fact that Tailored Blanks, which today may reach up to 1/3 of a car body weight, are purchased on the free market but from different steel suppliers, especially in Europe and NAFTA, the philosophy on OEM side has been changing gradually towards tough evaluation criteria. "No risk at the stamping side" calls for top quality Tailored- or Tubular Blank products. Outsourcing Tailored Blanks has been starting in Japan but up to now without any quality request from the OEM side like ISO 13919-1B (welding quality standard in Europe and USA). Increased competition will automatically push the quality level and the ongoing approach to combine high strength steel with Tailored- and Tubular Blanks will ask for even more reliable system concepts which enables to weld narrow seams at highest speed. Beside producing quality, which is the key to reduce one of the most important cost driver "material scrap," in-line quality systems with true and reliable evaluation is going to be a "must" on all weld systems. Traceability of all process related data submitted to interfaces according to customer request in combination with ghost-shift-operation of TB systems are tomorrow's state-of-the-art solutions of Tailored Blank-facilities.

  11. Cost analysis of simulated base-catalyzed biodiesel production processes

    International Nuclear Information System (INIS)

    Tasić, Marija B.; Stamenković, Olivera S.; Veljković, Vlada B.

    2014-01-01

    Highlights: • Two semi-continuous biodiesel production processes from sunflower oil are simulated. • Simulations were based on the kinetics of base-catalyzed methanolysis reactions. • The total energy consumption was influenced by the kinetic model. • Heterogeneous base-catalyzed process is a preferable industrial technology. - Abstract: The simulation and economic feasibility evaluation of semi-continuous biodiesel production from sunflower oil were based on the kinetics of homogeneously (Process I) and heterogeneously (Process II) base-catalyzed methanolysis reactions. The annual plant’s capacity was determined to be 8356 tonnes of biodiesel. The total energy consumption was influenced by the unit model describing the methanolysis reaction kinetics. The energy consumption of the Process II was more than 2.5 times lower than that of the Process I. Also, the simulation showed the Process I had more and larger process equipment units, compared with the Process II. Based on lower total capital investment costs and biodiesel selling price, the Process II was economically more feasible than the Process I. Sensitivity analysis was conducted using variable sunflower oil and biodiesel prices. Using a biodiesel selling price of 0.990 $/kg, Processes I and II were shown to be economically profitable if the sunflower oil price was 0.525 $/kg and 0.696 $/kg, respectively

  12. CONSOLIDATED COST ACCOUNTING AT MEAT AND FAT PRODUCTION: METHODOLOGY AND PRACTICE

    Directory of Open Access Journals (Sweden)

    Volodymyr Kushnir

    2017-08-01

    Full Text Available Aim of the article is to study and improve methods of consolidated cost accounting at meat and fat production to obtain detailed information about production costs and to find ways to reduce the cost of meat production. It is offered to account expenses at meat and fat department for individual production areas that will receive detailed information for the purposes of control, analysis, calculation and reporting. For expedient budgeting activities of each structural unit of meat and fat production and for needs to saving production is proposed to reflect the costs of each production plant to separate groups of analytical accounts. Key words: consolidated accounting, production costs of meat and fat production, cost accounting.

  13. REDUCTION OF THE PRODUCTION COST. EXPERIENCE OF THE COSTS REDUCTION AT RUP “BMZ”

    Directory of Open Access Journals (Sweden)

    S. S. Sereda

    2004-01-01

    Full Text Available The method of the daily operative monitoring of the costs for reduction of net cost and reinforcement of control on the costs has been applied for the first time in 2003 in RB at RUP “BMZ”, that allowed for the enterprise to control the costs in regime of real time.

  14. Operational costs induced by fluctuating wind power production in Germany and Scandinavia

    DEFF Research Database (Denmark)

    Meibom, Peter; Weber, C.; Barth, R.

    2009-01-01

    Adding wind power generation in a power system changes the operational patterns of the existing units due to the variability and partial predictability of wind power production. For large amounts of wind power production, the expectation is that the specific operational costs (fuel costs, start......-up costs, variable operation and maintenance costs, costs of consuming CO2 emission permits) of the other power plants will increase due to more operation time in part-load and more start-ups. The change in operational costs induced by the wind power production can only be calculated by comparing...... the operational costs in two power system configurations: with wind power production and with alternative wind production having properties such as conventional production, that is, being predictable and less variable. The choice of the characteristics of the alternative production is not straightforward...

  15. Historical plant cost and annual production expenses for selected electric plants, 1982

    International Nuclear Information System (INIS)

    1984-01-01

    This publication is a composite of the two prior publications, Hydroelectric Plant Construction Cost and Annual Production Expenses and Thermal-Electric Plant Construction Cost and Annual Production Expenses. Beginning in 1979, Thermal-Electric Plant Construction Cost and Annual Production Expenses contained information on both steam-electric and gas-turbine electric plant construction cost and annual production expenses. The summarized historical plant cost described under Historical Plant Cost in this report is the net cumulative-to-date actual outlays or expenditures for land, structures, and equipment to the utility. Historical plant cost is the initial investment in plant (cumulative to the date of initial commercial operation) plus the costs of all additions to the plant, less the value of retirements. Thus, historical plant cost includes expenditures made over several years, as modifications are made to the plant. Power Production Expenses is the reporting year's plant operation and maintenance expenses, including fuel expenses. These expenses do not include annual fixed charges on plant cost (capital costs) such as interest on debt, depreciation or amortization expenses, and taxes. Consequently, total production expenses and the derived unit costs are not the total cost of producing electric power at the various plants. This publication contains data on installed generating capacity, net generation, net capability, historical plant cost, production expenses, fuel consumption, physical and operating plant characteristics, and other relevant statistical information for selected plants

  16. Breaking Barriers to Low-Cost Modular Inverter Production & Use

    Energy Technology Data Exchange (ETDEWEB)

    Bogdan Borowy; Leo Casey; Jerry Foshage; Steve Nichols; Jim Perkinson

    2005-05-31

    The goal of this cost share contract is to advance key technologies to reduce size, weight and cost while enhancing performance and reliability of Modular Inverter Product for Distributed Energy Resources (DER). Efforts address technology development to meet technical needs of DER market protection, isolation, reliability, and quality. Program activities build on SatCon Technology Corporation inverter experience (e.g., AIPM, Starsine, PowerGate) for Photovoltaic, Fuel Cell, Energy Storage applications. Efforts focused four technical areas, Capacitors, Cooling, Voltage Sensing and Control of Parallel Inverters. Capacitor efforts developed a hybrid capacitor approach for conditioning SatCon's AIPM unit supply voltages by incorporating several types and sizes to store energy and filter at high, medium and low frequencies while minimizing parasitics (ESR and ESL). Cooling efforts converted the liquid cooled AIPM module to an air-cooled unit using augmented fin, impingement flow cooling. Voltage sensing efforts successfully modified the existing AIPM sensor board to allow several, application dependent configurations and enabling voltage sensor galvanic isolation. Parallel inverter control efforts realized a reliable technique to control individual inverters, connected in a parallel configuration, without a communication link. Individual inverter currents, AC and DC, were balanced in the paralleled modules by introducing a delay to the individual PWM gate pulses. The load current sharing is robust and independent of load types (i.e., linear and nonlinear, resistive and/or inductive). It is a simple yet powerful method for paralleling both individual devices dramatically improves reliability and fault tolerance of parallel inverter power systems. A patent application has been made based on this control technology.

  17. Economic impact of hand and wrist injuries: Health-care costs and productivity costs in a population-based study

    NARCIS (Netherlands)

    C.E. de Putter (Dennis); R.W. Selles (Ruud); S. Polinder (Suzanne); M.J.M. Panneman (Martien); S.E.R. Hovius (Steven); E.F. van Beeck (Ed)

    2012-01-01

    textabstractBackground: Injuries to the hand and wrist account for approximately 20% of patient visits to emergency departments and may impose a large economic burden. The purpose of this study was to estimate the total health-care costs and productivity costs of injuries to the hand and wrist and

  18. Cognate costs in bilingual speech production: Evidence from language switching

    Directory of Open Access Journals (Sweden)

    Mirjam Broersma

    2016-09-01

    Full Text Available This study investigates cross-language lexical competition in the bilingual mental lexicon. It provides evidence for the occurrence of inhibition as well as the commonly reported facilitation during the production of cognates (words with similar phonological form and meaning in two languages in a mixed picture naming task by highly proficient Welsh-English bilinguals. Previous studies have typically found cognate facilitation. It has previously been proposed (with respect to non-cognates that cross-language inhibition is limited to low-proficient bilinguals; therefore, we tested highly proficient, early bilinguals. In a mixed naming experiment (i.e., picture naming with language switching, 48 highly proficient, early Welsh-English bilinguals named pictures in Welsh and English, including cognate and non-cognate targets. Participants were English-dominant, Welsh-dominant, or had equal language dominance. The results showed evidence for cognate inhibition in to ways. First, both facilitation and inhibition were found on the cognate trials themselves, compared to non-cognate controls, modulated by the participants’ language dominance. The English-dominant group showed cognate inhibition when naming in Welsh (and no difference between cognates and controls when naming in English, and the Welsh-dominant and equal dominance groups generally showed cognate facilitation. Second, cognate inhibition was found as a behavioral adaptation effect, with slower naming for non-cognate filler words in trials after cognates than after non-cognate controls. This effect was consistent across all language dominance groups and both target languages, suggesting that cognate production involved cognitive control even if this was not measurable in the cognate trials themselves. Finally, the results replicated patterns of symmetrical switch costs, as commonly reported for balanced bilinguals. We propose that cognate processing might be affected by two different

  19. What Do Products/Services Cost? How Do We Know?

    Science.gov (United States)

    Weingand, Darlene E.

    1995-01-01

    Price (cost) analysis provides the library manager with valuable data for decision making and developing marketing strategies. This article examines program budget, cost-finding methodologies that influence demand, the impact of technology, and budget presentation. (Author/AEF)

  20. Customer Focused Product Design Using Integrated Model of Target Costing, Quality Function Deployment and Value Engineering

    Directory of Open Access Journals (Sweden)

    Hossein Rezaei Dolatabadi

    2013-01-01

    Full Text Available Target costing by integrating customer requirements, technical attributes and cost information into the product design phase and eliminating the non-value added functions, plays a vital role in different phases of the product life cycle. Quality Function Deployment (QFD and Value Engineering (VE are two techniques which can be used for applying target costing, successfully. The purpose of this paper is to propose an integrated model of target costing, QFD and VE to explore the role of target costing in managing product costs while promoting quality specifications meeting customers’ needs. F indings indicate that the integration of target costing, QFD and VE is an essential technique in managing the costs of production process. Findings also imply that integration of the three techniques provides a competitive cost advantage to companies.

  1. Y-12 product improvements expected to reduce metal production costs and decrease fabrication losses

    International Nuclear Information System (INIS)

    Hassler, Morris E.

    2005-01-01

    The Y-12 National Security Complex (Y-12) supplies uranium metal and uranium oxide feed material for fabrication into fuel for research reactors around the world. Over the past few years, Y-12 has continued to improve its Low Enriched Uranium (LEU) product. The LEU is produced by taking U.S. surplus Highly Enriched Uranium (HEU) and blending it with depleted or natural uranium. The surplus HEU comes from dismantled U.S. weapons parts. Those research reactors that use LEU from Y-12 are making important contributions to international nuclear nonproliferation by using LEU rather than HEU, and helping to disposition former U.S. weapons material. It is clearly understood that the research reactor community must keep fuel costs as low as possible and Y-12 is making every effort to improve efficiencies in producing the uranium through standardizing the chemical specifications as well as the product mass and dimensional qualities. These production cost reductions allows for the U.S. to keep the LEU product price low even with the dramatic increase in the uranium enrichment and feed component market prices in the last few years. This paper will discuss a new standard specification that has been proposed to existing LEU metal customers and fuel fabricators. It will also cover Y-12's progress on a new mold-design that will result in a more uniform, higher quality product and eliminates two steps of the production process. This new product is expected to decrease fabrication losses by 5-10%, depending on the fabricator's process. The paper will include planned activities and the schedule associated with implementation of the new specification and product form. (author)

  2. Activity-based costing evaluation of [F-18]-fludeoxyglucose production

    NARCIS (Netherlands)

    Krug, Bruno; Van Zanten, Annie; Pirson, Anne-Sophie; Crott, Ralph; Borght, Thierry Vander

    Introduction As healthcare expenses are escalating in many countries, the sector faces a new challenge of becoming more cost efficient. There is an urgent need for more accurate data on the costs of healthcare procedures. The cost of Positron Emission Tomography (PET) with [F-18]-fludeoxyglucose

  3. Cost sharing in production situations and network exploitation

    NARCIS (Netherlands)

    Koster, M.A.L.

    1999-01-01

    In many real-life situations where individuals work together in a joint project, joint costs (or profits) occur which have to be shared. The central problem of cost sharing is the allocation of costs in a 'just' way among the participants. Examples are numerous and range from setting fees for the

  4. 26 CFR 1.181-1T - Deduction for qualified film and television production costs (temporary).

    Science.gov (United States)

    2010-04-01

    ... incurred to distribute or exploit a production (including advertising and print costs). (iii) Production costs do not include the costs to prepare a new release or new broadcast of an existing film or video after the initial release or initial broadcast of the film or video (for instance, the preparation of a...

  5. Status and opportunities associated with product costing strategies in wood component manufacturing

    Science.gov (United States)

    Adrienn Andersch; Urs Buehlmann; Jan Wiedenbeck; Steve Lawser

    2013-01-01

    Product costing systems are critically important for businesses because they help reduce costs, price products at competitive prices, and enable strategic decisionmaking. This article reports the results of a survey designed to collect information about practices used by the North American hardwood dimension and components industry to calculate the cost of their...

  6. Operational costs induced by fluctuating wind power production in Germany and Scandinavia

    Energy Technology Data Exchange (ETDEWEB)

    Meibom, P. [Risoe National Lab., DTU, System Analysis Dept., Roskilde (Denmark); Weber, C. [Univ. Duisburg-Essen, Chai og Energy Management (Germany); Barth, R.; Brand, H. [Univ. of Stuttgart, Inst. of Energy Economics and the Rational Use of Energy (Germany)

    2007-05-15

    Adding wind power generation in a power system changes the operational patterns of the existing units due to the variability and unpredictability of wind power production. For large amounts of wind power production the expectation is that the operational costs of the other power plants will increase due to more operation time in part-load and more start-ups. The change in operational costs induced by the wind power production can only be calculated by comparing the operational costs in two power system configurations: with wind power production and with alternative production having properties like conventional production, i.e. being predictable and less variable. The choice of the characteristics of the alternative production is not straight forward and will therefore influence the operational costs induced by wind power production. This paper presents a method for calculating the change in operational costs due to wind power production using a stochastic optimization model covering the power systems in Germany and the Nordic countries. Two cases of alternative production are used to calculate the change in operational costs namely perfectly predictable wind power production enabling calculation of the costs connected to unpredictability, and constant wind power production enabling calculation of the operational costs connected to variability of wind power production. A 2010 case with three different wind power production penetration levels is analysed in the paper. (au)

  7. Cost function approach for estimating derived demand for composite wood products

    Science.gov (United States)

    T. C. Marcin

    1991-01-01

    A cost function approach was examined for using the concept of duality between production and input factor demands. A translog cost function was used to represent residential construction costs and derived conditional factor demand equations. Alternative models were derived from the translog cost function by imposing parameter restrictions.

  8. Productivity costs and determinants of productivity in HIV-infected patients.

    Science.gov (United States)

    Sendi, Pedram; Schellenberg, Fabian; Ungsedhapand, Chaiwat; Kaufmann, Gilbert R; Bucher, Heiner C; Weber, Rainer; Battegay, Manuel

    2004-05-01

    In HIV-infected patients, reduced ability to work may be an important component of the societal costs of this disease. Few data about productivity costs in HIV-infected patients are available. The goals of this study were to estimate productivity costs in the HIV-infected population in Switzerland and to identify characteristics that may influence patient productivity. This cross-sectional study included all patients younger than retirement age (65 years for men and 62 years for women) who were enrolled in the Swiss HIV Cohort Study in 2002. Measures of productivity losses in this population were based on patients' ability to work and the median monthly wage rates adjusted for age, sex, and educational level in Switzerland. Factors associated with ability to work were analyzed in a multivariate ordinary logistic regression (proportional odds) model. As of July 1, 2002, the exchange rate for US dollars to Swiss francs (CHF) was US $1.00 approximately equal to CHF 1.48. A total of 5319 HIV-infected patients (3665 men [68.9%] and 1655 women [31.1%]; mean [SD] age, 40.6 [8.4] years; range, 17-64 years) were included in the study. The mean annual productivity loss per patient was estimated at CHF 22,910 (95% CI, CHF 22,064-CHF 23, 756). Ability to work was independently associated with the following (P increase: odds ratio [OR], 0.60 [95% CI, 0.54-0.62]), sex (female/male: OR, 0.73 [95% CI, 0.63-0.84]), history of IV drug use (OR, 0.22 [95% CI, 0.19-0.26]), time since first positive HIV test (>10 years vs or =501 vs 0-200 cells/microL: OR, 2.01 [95%, CI, 1.64-2.46]), history of AIDS-indicator disease (OR, 0.47 [95% CI, 0.41-0.55]), stable partnership during the last 6 months (OR, 1.63 [95% CI, 1.43-1.86]), and educational level (higher vs basic: OR, 1.68 [95% CI, 1.45-1.95]). Productivity losses to society for the HIV-infected population appeared to be substantial in this analysis. Given a patient's clinical health status, a higher education level and a stable

  9. Understanding the reductions in US corn ethanol production costs: An experience curve approach

    International Nuclear Information System (INIS)

    Hettinga, W.G.; Junginger, H.M.; Dekker, S.C.; Hoogwijk, M.; McAloon, A.J.; Hicks, K.B.

    2009-01-01

    The US is currently the world's largest ethanol producer. An increasing percentage is used as transportation fuel, but debates continue on its costs competitiveness and energy balance. In this study, technological development of ethanol production and resulting cost reductions are investigated by using the experience curve approach, scrutinizing costs of dry grind ethanol production over the timeframe 1980-2005. Cost reductions are differentiated between feedstock (corn) production and industrial (ethanol) processing. Corn production costs in the US have declined by 62% over 30 years, down to 100$ 2005 /tonne in 2005, while corn production volumes almost doubled since 1975. A progress ratio (PR) of 0.55 is calculated indicating a 45% cost decline over each doubling in cumulative production. Higher corn yields and increasing farm sizes are the most important drivers behind this cost decline. Industrial processing costs of ethanol have declined by 45% since 1983, to below 130$ 2005 /m 3 in 2005 (excluding costs for corn and capital), equivalent to a PR of 0.87. Total ethanol production costs (including capital and net corn costs) have declined approximately 60% from 800$ 2005 /m 3 in the early 1980s, to 300$ 2005 /m 3 in 2005. Higher ethanol yields, lower energy use and the replacement of beverage alcohol-based production technologies have mostly contributed to this substantial cost decline. In addition, the average size of dry grind ethanol plants increased by 235% since 1990. For the future it is estimated that solely due to technological learning, production costs of ethanol may decline 28-44%, though this excludes effects of the current rising corn and fossil fuel costs. It is also concluded that experience curves are a valuable tool to describe both past and potential future cost reductions in US corn-based ethanol production

  10. A new approach for product cost estimation using data envelopment analysis

    Directory of Open Access Journals (Sweden)

    Adil Salam

    2012-10-01

    Full Text Available Cost estimation of new products has always been difficult as only few design, manufacturing and operational features will be known. In these situations, parametric or non-parametric methods are commonly used to estimate the cost of a product given the corresponding cost drivers. The parametric models use priori determined cost function where the parameters of the function are evaluated from historical data. Non-parametric methods, on the other hand, attempt to fit curves to the historic data without predetermined function. In both methods, it is assumed that the historic data used in the analysis is a true representation of the relation between the cost drivers and the corresponding costs. However, because of efficiency variations of the manufacturers and suppliers, changes in supplier selections, market fluctuations, and several other reasons, certain costs in the historic data may be too high whereas other costs may represent better deals for their corresponding cost drivers. Thus, it may be important to rank the historic data and identify benchmarks and estimate the target costs of the product based on these benchmarks. In this paper, a novel adaptation of cost drivers and cost data is introduced in order to use data envelopment analysis for the purpose of ranking cost data and identify benchmarks, and then estimate the target costs of a new product based on these benchmarks. An illustrative case study has been presented for the cost estimation of landing gears of an aircraft manufactured by an aerospace company located in Montreal, CANADA.

  11. Cost optimization of biofuel production – The impact of scale, integration, transport and supply chain configurations

    NARCIS (Netherlands)

    de Jong, S.A.|info:eu-repo/dai/nl/41200836X; Hoefnagels, E.T.A.|info:eu-repo/dai/nl/313935998; Wetterlund, Elisabeth; Pettersson, Karin; Faaij, André; Junginger, H.M.|info:eu-repo/dai/nl/202130703

    2017-01-01

    This study uses a geographically-explicit cost optimization model to analyze the impact of and interrelation between four cost reduction strategies for biofuel production: economies of scale, intermodal transport, integration with existing industries, and distributed supply chain configurations

  12. Nuclear power production: The financial costs. Background paper

    International Nuclear Information System (INIS)

    Berg, P.

    1993-11-01

    For many years, the Canadian nuclear industry has priced itself on its ability to provide safe, reliable and low-cost electricity to consumers. While nuclear power has indeed proved to be a relatively safe generator of electricity, its performance with respect to reliability and cost has declined noticeably in recent years. This paper documents the deteriorating cost performance of the industry, in comparison with that of its traditional competitor in power generation. It also breaks down the total costs into its component parts, assessing the key factors underlying the trends that are worsening the competitive position of the industry: a rise in initial capital costs, unanticipated technical difficulties resulting in additional capital costs, and the increasing operating expenses associated with poorer-than-expected reactor performance. (author). 8 refs., 2 tabs., 1 fig

  13. Increasing Air Compressor Productivity While Reducing Maintenance and Repair Costs

    National Research Council Canada - National Science Library

    Foss, R. S

    1993-01-01

    .... When this vital utility is put into this perspective we can start to deal with the considerations of systems engineering, planning, performance evaluation, cost control and preventive maintenance...

  14. Study to establish cost projections for production of Redox chemicals

    Science.gov (United States)

    Walther, J. F.; Greco, C. C.; Rusinko, R. N.; Wadsworth, A. L., III

    1982-01-01

    A cost study of four proposed manufacturing processes for redox chemicals for the NASA REDOX Energy Storage System yielded favorable selling prices in the range $0.99 to $1.91/kg of chromic chloride, anhydrous basis, including ferrous chloride. The prices corresponded to specific energy storage costs from under $9 to $17/kWh. A refined and expanded cost analysis of the most favored process yielded a price estimate corresponding to a storage cost of $11/kWh. The findings supported the potential economic viability of the NASA REDOX system.

  15. Production of solidified high level wastes: a cost comparison of solidification processes

    International Nuclear Information System (INIS)

    1977-06-01

    Differential cost estimates of the annual operating and maintenance costs and the capital costs for five HLW Waste Solidification Alternates were developed. The annual operating and maintenance cost estimates included the cost of labor, consumables, utilities, shipping casks, shipping and disposal at a federal repository. The capital cost included the cost of the component, installation and building. The differential cost estimates do not include equipment and facilities which are either shared with the reprocessing facility or are common between all of the alternates. Total annual cost differential between the five waste form alternates is summarized in tabular form. The Borosilicate Glass Alternate has the lowest total annual cost. The other alternates have higher costs which range from $6.6 M to $7.4 M per year higher than the Glass alternate with the Supercalcine being the highest cost at $7.4 M per year differential. The major items in the cost estimates are then disposal costs in the operating cost estimates and the HLW Storage Tanks in the capital cost estimates. The Supercalcine Multibarrier Alternate ships 180 canisters per year more than the other alternates and consequently has a significantly higher operating cost. However, off-setting this the Supercalcine Multibarrier Alternate does not require HLW Storage Tanks for decay because of the high heat conductivity of this product and correspondingly the capital cost for this alternate is significantly lower than the other alternates. The radiological risk values are correlated with the cost evaluation normalized to cost ($)/MWe-yr

  16. A study in cost analysis of aggregate production as depending on drilling and blasting design

    Science.gov (United States)

    Bilim, Niyazi; Çelik, Arif; Kekeç, Bilgehan

    2017-10-01

    Since aggregate production has vital importance for many engineering projects-such as construction, highway and plant-mixed concrete production-this study was undertaken to determine how the costs for such production are affected by the design of drilling and blasting processes used. Aggregates are used in the production of concrete and asphalt, which are critical resources for the construction sector. The ongoing population increase and the growth of living standards around the world drive the increasing demand for these products. As demand grows, competition has naturally arisen among producers in the industry. Competition in the market has directly affected prices, which leads to the need for new measures and cost analysis on production costs. The cost calculation is one of the most important parameters in mining activities. Aggregate production operations include drilling, blasting, secondary crushing (if necessary), loading, hauling and crushing-screening, and each of these factors affects cost. In this study, drilling and blasting design parameters (such as hole diameter, hole depth, hole distance and burden) were investigated and evaluated for their effect on the total cost of quarrying these products, based on a particular quarry selected for this research. As the result of evaluation, the parameters actually driving costs have been identified, and their effects on the cost have been determined. In addition, some suggestions are presented regarding production design which may lead to avoiding increased production costs.

  17. Bridging environmental and financial cost of dairy production: A case study of Irish agricultural policy.

    Science.gov (United States)

    Chen, Wenhao; Holden, Nicholas M

    2018-02-15

    The Irish agricultural policy 'Food Harvest 2020' is a roadmap for sectoral expansion and Irish dairy farming is expected to intensify, which could influence the environmental and economic performance of Irish milk production. Evaluating the total environmental impacts and the real cost of Irish milk production is a key step towards understanding the possibility of sustainable production. This paper addresses two main issues: aggregation of environmental impacts of Irish milk production by monetization, to understand the real cost of Irish milk production, including the environmental costs; and the effect of the agricultural policy 'Food Harvest 2020' on total cost (combining financial cost and environmental cost) of Irish milk production. This study used 2013 Irish dairy farming as a baseline, and defined 'bottom', 'target' and 'optimum' scenarios, according to the change of elementary inputs required to meet agricultural policy ambitions. The study demonstrated that the three monetization methods, Stepwise 2006, Eco-cost 2012 and EPS 2000, could be used for aggregating different environmental impacts into monetary unit, and to provide an insight for evaluating policy related to total environmental performance. The results showed that the total environmental cost of Irish milk production could be greater than the financial cost (up to €0.53/kg energy corrected milk). The dairy expansion policy with improved herbage utilization and fertilizer application could reduce financial cost and minimize the total environmental cost of per unit milk produced. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Trends in real costs of crude oil production: the Middle East vs its competitors

    International Nuclear Information System (INIS)

    Stauffer, T.R.

    1994-01-01

    ''Costs'' reflect all exploration and development outlays and include a 15% real rate of return. Costs in itself is generally not a barrier to new developments in OPEC countries. Costs are notably higher for most non-OPEC countries where they do inhibit developments. Mexico and Russia are potentially low cost producers. In the North Sea the cost-price squeeze is crucial. Low prices have forestalled net increases in new non-OPEC production. (author)

  19. Renewable electricity production costs-A framework to assist policy-makers' decisions on price support

    International Nuclear Information System (INIS)

    Dinica, Valentina

    2011-01-01

    Despite recent progress, the production costs for renewable electricity remain above those for conventional power. Expectations of continuous reductions in production costs, typically underpin governments' policies for financial support. They often draw on the technology-focused versions of the Experience Curve model. This paper discusses how national-contextual factors also have a strong influence on production costs, such as geographic, infrastructural, institutional, and resource factors. As technologies mature, and as they reach significant levels of diffusion nationally, sustained increases in production costs might be recorded, due to these nationally contextual factors, poorly accounted for in policy-making decisions for price support. The paper suggests an analytical framework for a more comprehensive understanding of production costs. Based on this, it recommends that the evolution of specific cost levels and factors be monitored to locate 'sources of changes'. The paper also suggests policy instruments that governments may use to facilitate cost decreases, whenever possible. The application of the framework is illustrated for the diffusion of wind power in Spain during the past three decades. - Highlights: → Models, frameworks for policy-making on price support for renewable electricity production costs. → Policy instruments to help reduce production costs. → Limits to the influence of policies of production costs reductions.

  20. Waste management facilities cost information: System cost model product description. Revision 2

    International Nuclear Information System (INIS)

    Lundeen, A.S.; Hsu, K.M.; Shropshire, D.E.

    1996-02-01

    In May of 1994, Lockheed Idaho Technologies Company (LITCO) in Idaho Falls, Idaho and subcontractors developed the System Cost Model (SCM) application. The SCM estimates life-cycle costs of the entire US Department of Energy (DOE) complex for designing; constructing; operating; and decommissioning treatment, storage, and disposal (TSD) facilities for mixed low-level, low-level, transuranic, and mixed transuranic waste. The SCM uses parametric cost functions to estimate life-cycle costs for various treatment, storage, and disposal modules which reflect planned and existing facilities at DOE installations. In addition, SCM can model new facilities based on capacity needs over the program life cycle. The SCM also provides transportation costs for DOE wastes. Transportation costs are provided for truck and rail and include transport of contact-handled, remote-handled, and alpha (transuranic) wastes. The user can provide input data (default data is included in the SCM) including the volume and nature of waste to be managed, the time period over which the waste is to be managed, and the configuration of the waste management complex (i.e., where each installation's generated waste will be treated, stored, and disposed). Then the SCM uses parametric cost equations to estimate the costs of pre-operations (designing), construction costs, operation management, and decommissioning these waste management facilities

  1. Y-12 product improvements expected to reduce metal production costs and decrease fabrication losses

    International Nuclear Information System (INIS)

    Parker, Elaine; Hassler, Morris

    2004-01-01

    Full text: The Y-12 National Security Complex supplies uranium metal and uranium oxide feed material that is then fabricated into fuel for research reactors around the world. Over the past two to three years, Y-12 has learned a great deal about its Low Enriched Uranium (LEU) product. The LEU is produced by taking U.S. surplus Highly Enriched Uranium (HEU) and blending it with depleted or natural uranium. The surplus HEU comes from dismantled U.S. weapons parts that have been declared as surplus. Those research reactors that use LEU from Y-12 are making important contributions to international nuclear non-proliferation by using LEU rather than HEU, and by helping to disposition former weapons material. We clearly understand that our customers want to keep fuel costs as low as possible. We at Y-12 are making every effort to improve efficiencies in producing the uranium through standardizing the chemical specifications as well as the product mass and dimensional qualities. This paper will discuss the new standard specification that we have proposed to existing LEU metal customers and fuel fabricators. It will also cover Y-12's progress on a new mold-design that will result in a more uniform, higher quality product that is less expensive to produce. This new product is expected to decrease overall fabrication losses by 5-10%, depending on the fabricator's process. The paper will include planned activities and the schedule associated with implementation of the new specification and product form. (author)

  2. Calculation of Complexity Costs – An Approach for Rationalizing a Product Program

    DEFF Research Database (Denmark)

    Hansen, Christian Lindschou; Mortensen, Niels Henrik; Hvam, Lars

    2012-01-01

    This paper proposes an operational method for rationalizing a product program based on the calculation of complexity costs. The method takes its starting point in the calculation of complexity costs on a product program level. This is done throughout the value chain ranging from component invento...... of a product program. These findings represent an improved decision basis for the planning of reactive and proactive initiatives of rationalizing a product program.......This paper proposes an operational method for rationalizing a product program based on the calculation of complexity costs. The method takes its starting point in the calculation of complexity costs on a product program level. This is done throughout the value chain ranging from component...... inventories at the factory sites, all the way to the distribution of finished goods from distribution centers to the customers. The method proposes a step-wise approach including the analysis, quantification and allocation of product program complexity costs by the means of identifying of a number...

  3. PLAN 2003. Costs for management of the radioactive waste products from nuclear power production

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-06-01

    The companies that own nuclear power plants in Sweden are responsible for adopting measures needed to manage and dispose of spent nuclear fuel and radioactive waste from the Swedish nuclear power reactors in a safe manner. The so-called Financing Act (1992:1537) is linked to this responsibility and prescribes that a reactor owner, in consultation with other reactor owners, shall calculate the cost for management and disposal of the spent fuel and radioactive waste and for decommissioning and dismantling of the reactor plant. The reactor owner shall annually submit to the regulatory authority the cost data that are required for calculation of the fees to be imposed on electricity production during the ensuing year and of the guarantees that must be given as security for costs not covered by paid-in fees. The reactor owners have jointly commissioned SKB to calculate and compile these costs. This report presents a calculation of the costs for implementing all of these measures. The cost calculations are based on the plan for management and disposal of the radioactive waste that has been prepared by SKB and is described in this report. The following facilities and systems are in operation: Transportation system for radioactive waste products; Central interim storage facility for spent nuclear fuel, CLAB; Final repository for radioactive operational waste, SFR 1. Plans also exist for: Canister factory and encapsulation plant for spent nuclear fuel; Deep repository for spent nuclear fuel; Final repository for long-lived low- and intermediate-level waste; Final repository for decommissioning waste. The cost calculations also include costs for research, development and demonstration, as well as for decommissioning and dismantling the reactor plants. This report is based on the proposed strategy for the activities which is presented in SKB's RD and D-Programme 2001 and in the supplementary account to RD and D-Programme 98 which SKB submitted to the regulatory authority

  4. PLAN 2003. Costs for management of the radioactive waste products from nuclear power production

    International Nuclear Information System (INIS)

    2003-06-01

    The companies that own nuclear power plants in Sweden are responsible for adopting measures needed to manage and dispose of spent nuclear fuel and radioactive waste from the Swedish nuclear power reactors in a safe manner. The so-called Financing Act (1992:1537) is linked to this responsibility and prescribes that a reactor owner, in consultation with other reactor owners, shall calculate the cost for management and disposal of the spent fuel and radioactive waste and for decommissioning and dismantling of the reactor plant. The reactor owner shall annually submit to the regulatory authority the cost data that are required for calculation of the fees to be imposed on electricity production during the ensuing year and of the guarantees that must be given as security for costs not covered by paid-in fees. The reactor owners have jointly commissioned SKB to calculate and compile these costs. This report presents a calculation of the costs for implementing all of these measures. The cost calculations are based on the plan for management and disposal of the radioactive waste that has been prepared by SKB and is described in this report. The following facilities and systems are in operation: Transportation system for radioactive waste products; Central interim storage facility for spent nuclear fuel, CLAB; Final repository for radioactive operational waste, SFR 1. Plans also exist for: Canister factory and encapsulation plant for spent nuclear fuel; Deep repository for spent nuclear fuel; Final repository for long-lived low- and intermediate-level waste; Final repository for decommissioning waste. The cost calculations also include costs for research, development and demonstration, as well as for decommissioning and dismantling the reactor plants. This report is based on the proposed strategy for the activities which is presented in SKB's RD and D-Programme 2001 and in the supplementary account to RD and D-Programme 98 which SKB submitted to the regulatory authority. The

  5. METHODOLOGICAL BASES OF PRACTICAL APPLICATION OF PRODUCTION COSTS MANAGEMENT ACCOUNTING AT OIL AND FAT ENTERPRISES

    Directory of Open Access Journals (Sweden)

    E. Mykhalska

    2014-12-01

    Full Text Available Implementing of models of production costs management accounting in response to responsibility centers into Ukrainian oil and fat enterprises is the aim of their full optimization in terms of current competitive market. Setting production costs as an object of every single responsibility center will enable to update the whole range of accounting operations on costs paperwork, used raw and other materials assessment, cost recovery from labour costs with benefits-related deduction, depreciation recovery due to season production variability, services distribution of auxiliary and service departments and general production costs. In this regard, referring to the current costs accounting at oil and fat enterprises of Ukraine it should be admitted that the main purpose of the article is to explore the above-mentioned issues.

  6. Modelling the Costs and Benefits of Delayed Product Differentiation

    OpenAIRE

    Hau L. Lee; Christopher S. Tang

    1997-01-01

    Expanding product variety and high customer service provision are both major challenges for manufacturers to compete in the global market. In addition to many ongoing programs, such as lead-time reduction, redesigning products and processes so as to delay the point of product differentiation is becoming an emerging means to address these challenges. Such a strategy calls for redesigning products and processes so that the stages of the production process in which a common process is used are p...

  7. Space system production cost benefits from contemporary philosophies in management and manufacturing

    Science.gov (United States)

    Rosmait, Russell L.

    1991-01-01

    The cost of manufacturing space system hardware has always been expensive. The Engineering Cost Group of the Program Planning office at Marshall is attempting to account for cost savings that result from new technologies in manufacturing and management. The objective is to identify and define contemporary philosophies in manufacturing and management. The seven broad categories that make up the areas where technological advances can assist in reducing space system costs are illustrated. Included within these broad categories is a list of the processes or techniques that specifically provide the cost savings within todays design, test, production and operations environments. The processes and techniques listed achieve savings in the following manner: increased productivity; reduced down time; reduced scrap; reduced rework; reduced man hours; and reduced material costs. In addition, it should be noted that cost savings from production and processing improvements effect 20 to 40 pct. of production costs whereas savings from management improvements effects 60 to 80 of production cost. This is important because most efforts in reducing costs are spent trying to reduce cost in the production.

  8. Current production costs in various power plant systems

    Energy Technology Data Exchange (ETDEWEB)

    Weible, H.

    1977-01-01

    The costs of producing electric power were evaluated for flowing water power plants, storage and pumped storage power plants, bituminous coal power plants, heating oil power plants (fired with heavy heating oil), natural gas-fired power plants, gas turbines, pressurized water reactors, and boiling water reactors. The calculational methods used for evaluating costs and the input data for methods used for the KOSKON and KOSKERN computer programs are described. It is emphasized that the calculations are examples to indicate the possible effects of the cost program and are only as valid as the input data. (JSR)

  9. The Cost Structure - Key Element in the Development of Product Policy

    Directory of Open Access Journals (Sweden)

    Daniel Jiroveanu

    2016-01-01

    In this regard, planning the launch of new products or services requires a strategic approach, astructural analysis of the costs and the identification of opportunities to increase optimization withthe aim of increasing the effectiveness of the product policy.

  10. Internalizing environmental costs: A survey of progress in estimating the external environmental costs of electricity production and a review of market-based policies to incorporate them

    International Nuclear Information System (INIS)

    Eto, J.H.; Helcke, G.

    1991-01-01

    The production of electricity creates environmental insults whose costs are not fully reflected in the prices paid by consumers for electricity services. Failure to incorporate these external costs leads to economically inefficient production and consumption decisions. The present work reviews two related efforts to address this market distortion. The first concerns progress in estimating the uninternalized environmental costs of electricity production. The second concerns market-based approaches to internalizing these costs in electricity production and consumption decisions. 10 tabs.; 41 refs

  11. Multi-objective optimization approach for cost management during product design at the conceptual phase

    Science.gov (United States)

    Durga Prasad, K. G.; Venkata Subbaiah, K.; Narayana Rao, K.

    2014-03-01

    The effective cost management during the conceptual design phase of a product is essential to develop a product with minimum cost and desired quality. The integration of the methodologies of quality function deployment (QFD), value engineering (VE) and target costing (TC) could be applied to the continuous improvement of any product during product development. To optimize customer satisfaction and total cost of a product, a mathematical model is established in this paper. This model integrates QFD, VE and TC under multi-objective optimization frame work. A case study on domestic refrigerator is presented to show the performance of the proposed model. Goal programming is adopted to attain the goals of maximum customer satisfaction and minimum cost of the product.

  12. Enhancing efficiency of production cost on seafood process with activity based management method

    Science.gov (United States)

    Tarigan, U.; Tarigan, U. P. P.

    2018-02-01

    The efficiency of production costs has an important impact maintaining company presence in the business world, as well as in the face of increasingly sharp global competition. It was done by identifying and reducing non-value-added activities to decrease production costs and increase profits. The study was conducted at a company engaged in the production of squid (seafood). It has a higher product price than the market as Rp 50,000 per kg while the market price of squid is only Rp 35,000 per kg. The price of the product to be more expensive compared with market price, and thereby a lot more consumers choose the lower market price. Based on the discussions conducted, the implementation of Activity Based Management was seen in the reduction of activities that are not added value in the production process. Since each activities consumers cost, the reduction of nonvalue-added activities has effects on the decline of production cost. The production’s decline costs mainly occur in the reduction of material transfer costs. The results showed that there was an increase after the improvement of 2.60%. Increased production cost efficiency causes decreased production costs and increased profits.

  13. Innovation in technology for the least product price and cost - a new minimum cost relation for reductions during technological learning

    International Nuclear Information System (INIS)

    Duffey, R.B.

    2004-01-01

    By analogy with the concepts of human learning, we show and introduce a new method to obtain least product cost and price that includes the effect of innovation and technological learning in manufacturing and production. This key result is a new paradigm instead of the usual economic 'power law' formulation. The new analysis is based on extensive analysis of many technological systems, and is directly related to the presence of learning as experience is accumulated. The results agree with the observed data. By using a consistent basis, the method replaces previous empirical 'power law' descriptions of the technological learning curve with a new 'marginal minimum cost equation' (MCE). (author)

  14. Epilepsy in Sweden: health care costs and loss of productivity--a register-based approach.

    Science.gov (United States)

    Bolin, Kristian; Lundgren, Anders; Berggren, Fredrik; Källén, Kristina

    2012-12-01

    The objective was to estimate health care costs and productivity losses due to epilepsy in Sweden and to compare these estimates to previously published estimates. Register data on health care utilisation, pharmaceutical sales, permanent disability and mortality were used to calculate health care costs and costs that accrue due to productivity losses. By linkage of register information, we were able to distinguish pharmaceuticals prescribed against epilepsy from prescriptions that were prompted by other indications. The estimated total cost of epilepsy in Sweden in 2009 was 441 million, which corresponds to an annual per-patient cost of 8,275. Health care accounted for about 16% of the estimated total cost, and drug costs accounted for about 7% of the total cost. The estimated health care cost corresponded to about 0.2% of the total health care cost in Sweden in 2009. Indirect costs were estimated at 370 million, 84% of which was due to sickness absenteeism. Costs resulting from epilepsy-attributable premature deaths or permanent disability to work accounted for about 1% of the total indirect cost in Sweden in 2009. The per-patient cost of epilepsy is substantial. Thus, even though the prevalence of the illness is relatively small, the aggregated cost that epilepsy incurs on society is significant.

  15. Internalizing external environmental costs of agriculture into product prices, Case study for milk and potatoes

    NARCIS (Netherlands)

    Masselink, Dirk Jan

    2007-01-01

    Society has to pay large amounts of money to compensate for the environmental damages caused by farm emissions. These external costs are not fully accounted for in product prices and internalization of these external costs into the cost price of agricultu

  16. Calculating Optimum sowing factor: A tool to evaluate sowing strategies and minimize seedling production cost

    Science.gov (United States)

    Eric van Steenis

    2013-01-01

    This paper illustrates how to use an excel spreadsheet as a decision-making tool to determine optimum sowing factor to minimize seedling production cost. Factors incorporated into the spreadsheet calculations include germination percentage, seeder accuracy, cost per seed, cavities per block, costs of handling, thinning, and transplanting labor, and more. In addition to...

  17. Expansion formulae for characteristics of cumulative cost in finite horizon production models

    NARCIS (Netherlands)

    Ayhan, H.; Schlegel, S.

    2001-01-01

    We consider the expected value and the tail probability of cumulative shortage and holding cost (i.e. the probability that cumulative cost is more than a certain value) in finite horizon production models. An exact expression is provided for the expected value of the cumulative cost for general

  18. The average unit production cost of blood in Zimbabwe from a provider's perspective

    NARCIS (Netherlands)

    Mafirakureva, N.; Nyoni, H.; Chikwereti, R.; Khoza, S.; Mvere, D.A.; Emmanuel, J.C.; Postma, M.J.; Van Hulst, M.

    2014-01-01

    Background/Case Studies: Blood utilization and blood transfusion costs are generally perceived to be increasing at a time when healthcare budgets continue being constricted. There is a paucity of published data on the production costs of blood and the costs of blood transfusion in sub-Saharan

  19. Fitness cost of pheromone production in signaling female moths.

    Science.gov (United States)

    Harari, Ally R; Zahavi, Tirtza; Thiéry, Denis

    2011-06-01

    A secondary sexual character may act as an honest signal of the quality of the individual if the trait bears a cost and if its expression is phenotypically condition dependent. The cost of increasing the trait should be tolerable for individuals in good condition but not for those in a poor condition. The trait thus provides an honest signal of quality that enables the receiver to choose higher quality mates. Evidence for sex pheromones, which play a major role in shaping sexual evolution, inflicting a signaling cost is scarce. Here, we demonstrate that the amount of the major component of the pheromone in glands of Lobesia botrana (Lepidoptera) females at signaling time was significantly greater in large than in small females, that male moths preferred larger females as mates when responding to volatile signals, and small virgin females, but not large ones, exposed to conspecific pheromone, produced, when mated, significantly fewer eggs than nonexposed females. The latter indicates a condition-dependent cost of signaling. These results are in accordance with the predictions of condition-dependent honest signals. We therefore suggest that female signaling for males using sex pheromones bears a cost and thus calling may serve as honest advertisement for female quality. © 2011 The Author(s). Evolution© 2011 The Society for the Study of Evolution.

  20. Working long hours: less productive but less costly? Firm-level evidence from Belgium

    OpenAIRE

    DELMEZ, Françoise; Vandenberghe, Vincent

    2017-01-01

    From the point of view of a profit-maximizing firm, the optimal number of working hours depends not only on the marginal productivity of hours but also on the marginal labour cost. This paper develops and assesses empirically a simple model of firms' decision making where productivity varies with hours and where the firm faces labour costs per worker that are invariant to the number of hours worked: i.e. quasi-fixed labour costs. Using Belgian firm-level data on production, labour costs, work...

  1. Dynamics of a Bertrand duopoly with differentiated products and nonlinear costs: Analysis, comparisons and new evidences

    International Nuclear Information System (INIS)

    Brianzoni, Serena; Gori, Luca; Michetti, Elisabetta

    2015-01-01

    This paper studies mathematical properties and dynamics of a duopoly with price competition and horizontal product differentiation by introducing quadratic production costs (decreasing returns to scale), thus extending the model with linear costs (constant returns to scale) of Fanti et al. [11]. The economy is described by a two-dimensional non-invertible discrete time dynamic system. The paper first determines fixed points and other invariant sets, showing that synchronized dynamics can occur. Then, stability properties are compared in the cases of quadratic costs and linear costs by considering the degree of product differentiation and the speed of adjustment of prices as key parameters. It is also shown that synchronization takes place if products tend to be relatively complements and stressed similarities and differences between models with quadratic and linear costs. Finally, the paper focuses on the phenomenon of multistability thus underlying new evidences in comparison with the model with linear costs.

  2. Cost and price estimate of Brayton and Stirling engines in selected production volumes

    Science.gov (United States)

    Fortgang, H. R.; Mayers, H. F.

    1980-01-01

    The methods used to determine the production costs and required selling price of Brayton and Stirling engines modified for use in solar power conversion units are presented. Each engine part, component and assembly was examined and evaluated to determine the costs of its material and the method of manufacture based on specific annual production volumes. Cost estimates are presented for both the Stirling and Brayton engines in annual production volumes of 1,000, 25,000, 100,000 and 400,000. At annual production volumes above 50,000 units, the costs of both engines are similar, although the Stirling engine costs are somewhat lower. It is concluded that modifications to both the Brayton and Stirling engine designs could reduce the estimated costs.

  3. 78 FR 17648 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2013-03-22

    ... Conservation Program for Consumer Products: Representative Average Unit Costs of Energy'', dated April 26, 2012... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy AGENCY: Office of Energy Efficiency...

  4. Geographical analyses of wood chips potentials, cost and supply for sustainable energy production in Denmark

    DEFF Research Database (Denmark)

    Möller, Bernd

    2004-01-01

    The paper presents a study which uses a practical application of rasterbased geographical information system to perform cost-supply analysis of wood chips resources for energy production.......The paper presents a study which uses a practical application of rasterbased geographical information system to perform cost-supply analysis of wood chips resources for energy production....

  5. Using a Web-Based System to Estimate the Cost of Online Course Production

    Science.gov (United States)

    Gordon, Stuart; He, Wu; Abdous, M'hammed

    2009-01-01

    The increasing demand for online courses requires efficient and low cost production. Since the decision to develop online courses is often affected by financial factors, it is becoming increasingly important to determine, upfront, the cost of online course production. Many of the programs and educators interested in developing online courses…

  6. 76 FR 71450 - Deduction for Qualified Film and Television Production Costs; Correction

    Science.gov (United States)

    2011-11-18

    ... Deduction for Qualified Film and Television Production Costs; Correction AGENCY: Internal Revenue Service... Register on Wednesday, October 19, 2011 (76 FR 64816) relating to deductions for the cost of producing film and television productions. DATES: This correction is effective on November 18, 2011, and is...

  7. Computer software to estimate timber harvesting system production, cost, and revenue

    Science.gov (United States)

    Dr. John E. Baumgras; Dr. Chris B. LeDoux

    1992-01-01

    Large variations in timber harvesting cost and revenue can result from the differences between harvesting systems, the variable attributes of harvesting sites and timber stands, or changing product markets. Consequently, system and site specific estimates of production rates and costs are required to improve estimates of harvesting revenue. This paper describes...

  8. VARIANTS OF DETERMINING THE MANUFACTURING COST OF A PRODUCT IN A PRODUCTION UNIT IN THE LIGHT OF BALANCE SHEET LAW

    Directory of Open Access Journals (Sweden)

    Marzena STROJEK‐FILUS

    2014-01-01

    Full Text Available The category of the manufacturing cost of a product is one of the most important ones from the point of view of proper valuation of the assets of a production unit, costs of its operations as well as pricing decisions. This article presents the problem of determining the manufacturing cost of a product in terms of balance sheet law. It has been shown that in order to determine this value various methods and options are allowed by this law, by means of which different values of manufacturing cost of a product are obtained. The importance of a proper selection of an allocation key in setilement of indirect production costs has been highlighted as well as the results of using, in certain cases, approved simplifications in the balance sheet law when determining the manufacturing cost of products have been demonstrated. The problem presented in this article is crucial from the point of view of an organization and management of production as well as managerial decision‐making in a company in the area of design of products and processes.

  9. Biological waste by-production costs in forest management and possibilities for their reduction

    Directory of Open Access Journals (Sweden)

    Jiří Kadlec

    2004-01-01

    Full Text Available Biological wastes in forestry were observed from view of their by-production in silvicultural and logging operations. There were identified points where biological waste was produced in this paper, waste costs ratio for silvicultural and logging operations and were made suggestions for reduction of these costs. Biological waste costs give 34.4% of total costs of silvicultural operations and 30% of total costs of logging operations. Natural regeneration and minor forest produce operations are opportunities for reduction of these costs.

  10. Activity-based costing evaluation of [18F]-fludeoxyglucose production.

    Science.gov (United States)

    Krug, Bruno; Van Zanten, Annie; Pirson, Anne-Sophie; Crott, Ralph; Vander Borght, Thierry

    2008-01-01

    As healthcare expenses are escalating in many countries, the sector faces a new challenge of becoming more cost efficient. There is an urgent need for more accurate data on the costs of healthcare procedures. The cost of Positron Emission Tomography (PET) with [(18)F]-fludeoxyglucose ((18)F-FDG) studies is mainly influenced by the price of the radiopharmaceutical, which may vary throughout Europe from 300 to 500 Euro per patient dose (370 MBq). The aim of the current study is to conduct an activity-based costing (ABC) estimation of (18)F-FDG production in Europe to better identify the different cost components and to analyse their relative contribution to the total cost. Financial data were collected on capital expense and global operating costs through interviews with industry experts, PET centre managers, evaluation of prior studies, and review of expenses incurred at the University Medical Centre in Groningen (The Netherlands). After mapping the activities, we divided the cost in five categories: wage, equipment, consumables, overhead and space costs. A sensitivity analysis was performed for key cost components, including the compliance with regulatory requirements. The critical factor for profitability was throughput. Including the European regulation procedure, the cost for 370 MBq (18)F-FDG patient dose, 3 h EOS without delivery cost, ranges between 155 and 177 Euro/dose for two production runs and between 210 and 237 Euro/dose for one production run. These costs are predominantly determined by personnel and equipment costs, although the cost for quality assurance increases steadily. The ABC analysis provides significant insight into the production cost components of (18)F-FDG through different operating configurations. Reductions in equipment prices, increased availability of radiopharmaceuticals, growth in demand, and improvements in reimbursement will all contribute to the financial viability of this imaging technique.

  11. Activity-based costing evaluation of [18F]-fludeoxyglucose production

    International Nuclear Information System (INIS)

    Krug, Bruno; Pirson, Anne-Sophie; Borght, Thierry vander; Zanten, Annie van; Crott, Ralph

    2008-01-01

    As healthcare expenses are escalating in many countries, the sector faces a new challenge of becoming more cost efficient. There is an urgent need for more accurate data on the costs of healthcare procedures. The cost of Positron Emission Tomography (PET) with [ 18 F]-fludeoxyglucose ( 18 F-FDG) studies is mainly influenced by the price of the radiopharmaceutical, which may vary throughout Europe from 300 to 500 Euro per patient dose (370 MBq). The aim of the current study is to conduct an activity-based costing (ABC) estimation of 18 F-FDG production in Europe to better identify the different cost components and to analyse their relative contribution to the total cost. Financial data were collected on capital expense and global operating costs through interviews with industry experts, PET centre managers, evaluation of prior studies, and review of expenses incurred at the University Medical Centre in Groningen (The Netherlands). After mapping the activities, we divided the cost in five categories: wage, equipment, consumables, overhead and space costs. A sensitivity analysis was performed for key cost components, including the compliance with regulatory requirements. The critical factor for profitability was throughput. Including the European regulation procedure, the cost for 370 MBq 18 F-FDG patient dose, 3 h EOS without delivery cost, ranges between 155 and 177 Euro/dose for two production runs and between 210 and 237 Euro/dose for one production run. These costs are predominantly determined by personnel and equipment costs, although the cost for quality assurance increases steadily. The ABC analysis provides significant insight into the production cost components of 18 F-FDG through different operating configurations. Reductions in equipment prices, increased availability of radiopharmaceuticals, growth in demand, and improvements in reimbursement will all contribute to the financial viability of this imaging technique. (orig.)

  12. Algae Production from Wastewater Resources: An Engineering and Cost Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Schoenung, Susan [Longitude 122 West, Inc.; Efroymson, Rebecca Ann [ORNL

    2018-03-01

    Co-locating algae cultivation ponds near municipal wastewater (MWW) facilities provides the opportunity to make use of the nitrogen and phosphorus compounds in the wastewater as nutrient sources for the algae. This use benefits MWW facilities, the algae biomass and biofuel or bioproduct industry, and the users of streams where treated or untreated waste would be discharged. Nutrient compounds can lead to eutrophication, hypoxia, and adverse effects to some organisms if released downstream. This analysis presents an estimate of the cost savings made possible to cultivation facilities by using the nutrients from wastewater for algae growth rather than purchase of the nutrients. The analysis takes into consideration the cost of pipe transport from the wastewater facility to the algae ponds, a cost factor that has not been publicly documented in the past. The results show that the savings in nutrient costs can support a wastewater transport distance up to 10 miles for a 1000-acre-pond facility, with potential adjustments for different operating assumptions.

  13. Parametric optimization for the low cost production of nanostructure ...

    African Journals Online (AJOL)

    In recent years, nanocrystalline materials have drawn the attention of researchers in the field of materials science engineering due to its enhanced mechanical properties such as high strength and high hardness. However, the cost of nanocrystalline materials is prohibitively high, primarily due to the expensive equipments ...

  14. Smartfactory, a modular, low cost productivity monitoring system

    CSIR Research Space (South Africa)

    Bosscha, PA

    2010-07-01

    Full Text Available lack of objectivity and plain incorrect data entries. In aid of the SMMEs the Smartfactory system offers a low-cost modular monitoring solution capable of implementation in a step by step fashion with little training required in installation...

  15. Cost-Effective Mass Production of Mono Bucket Foundations

    DEFF Research Database (Denmark)

    Gres, Szymon; Nielsen, Søren Andreas; Fejerskov, Morten

    2015-01-01

    for innovative and cost-effective design of Mono Bucket foundations. Established approach merges wind and wave load models, soil/structure interaction topics, structural optimization and installation/fabrication aspects, into software package with ability to perform optimal design of the individual foundations...

  16. Breaking down the Bilingual Cost in Speech Production

    Science.gov (United States)

    Sadat, Jasmin; Martin, Clara D.; Magnuson, James S.; Alario, François-Xavier; Costa, Albert

    2016-01-01

    Bilinguals have been shown to perform worse than monolinguals in a variety of verbal tasks. This study investigated this bilingual verbal cost in a large-scale picture-naming study conducted in Spanish. We explored how individual characteristics of the participants and the linguistic properties of the words being spoken influence this performance…

  17. Large area, low cost solar cell development and production readiness

    Science.gov (United States)

    Michaels, D.

    1982-01-01

    A process sequence for a large area ( or = 25 sq. cm) silicon solar cell was investigated. Generic cell choice was guided by the expected electron fluence, by the packing factors of various cell envelope designs onto each panel to provide needed voltage as well as current, by the weight constraints on the system, and by the cost goals of the contract.

  18. Health care and lost productivity costs of overweight and obesity in New Zealand.

    Science.gov (United States)

    Lal, Anita; Moodie, Marj; Ashton, Toni; Siahpush, Mohammad; Swinburn, Boyd

    2012-12-01

    To estimate the costs of health care and lost productivity attributable to overweight and obesity in New Zealand (NZ) in 2006. A prevalence-based approach to costing was used in which costs were calculated for all cases of disease in the year 2006. Population attributable fractions (PAFs) were calculated based on the relative risks obtained from large cohort studies and the prevalence of overweight and obesity. For each disease, the PAF was multiplied by the total health care cost. The costs of lost productivity associated with premature mortality were estimated using both the Human Capital approach (HCA) and Friction Cost approach (FCA). Health care costs attributable to overweight and obesity were estimated to be NZ$686m or 4.5% of New Zealand's total health care expenditure in 2006. The costs of lost productivity using the FCA were estimated to be NZ$98m and NZ$225m using the HCA. The combined costs of health care and lost productivity using the FCA were $784m and $911m using the HCA. The cost burden of overweight and obesity in NZ is considerable. Policies and interventions are urgently needed to reduce the prevalence of obesity thereby decreasing these substantial costs. © 2012 The Authors. ANZJPH © 2012 Public Health Association of Australia.

  19. 73 Activity Based Costing and Product Pricing Decision: the Nigerian Case

    Directory of Open Access Journals (Sweden)

    Ebipanipre Gabriel Mieseigha

    2014-06-01

    Full Text Available This paper examined activity based costing and product pricing decisions in Nigeria so as to ascertain whether activity based costing have the ability to enhance profitability and control cost of manufacturing firms. Towards this end, a multiple correlation and regression estimation technique was used in analyzing the data obtained in the study. The study found that activity based costing affects product costing and pricing decision. In addition, the results showed that improved profitability and cost control can be achieved by implementing activity based costing approach by manufacturing firms. The implication is that traditional costing approach fails in many pricing situations by arbitrarily allocating indirect cost and activity based costing helps in allocating indirect cost accurately. Thus, it was recommended amongst others that activity based costing need to be practiced, maintained and implemented by manufacturing firms since it has a broad range of uses for a wide variety of company functions and operations in the area of process analysis, strategy support, time-based accounting, monitoring wastage, as well as quality and productivity management.

  20. 75 FR 33379 - Railroad Cost Recovery Procedures-Productivity Adjustment; Quarterly Rail Cost Adjustment Factor

    Science.gov (United States)

    2010-06-11

    ... information is contained in the Board's June 14, 2010 decision, which is available on our website at http://www.stb.dot.gov . Copies of the decision may be purchased by contacting the office of Public... Cost Adjustment Factor AGENCY: Surface Transportation Board. [[Page 33380

  1. Airport costs and production technology : a translog cost function analysis with implications for economic development.

    Science.gov (United States)

    2011-07-01

    Based upon 50 large and medium hub airports over a 13 year period, this research estimates one and two : output translog models of airport short run operating costs. Output is passengers transported on non-stop : segments and pounds of cargo shipped....

  2. Fixed Costs and the Product Market Treatment of Preference Minorities

    OpenAIRE

    Steven Berry; Alon Eizenberg; Joel Waldfogel

    2014-01-01

    It is well documented that, in the presence of substantial fixed costs, markets offer preference majorities more variety than preference minorities. This fact alone, however, does not demonstrate the market outcome is in any way biased against preference minorities. In this paper, we clarify the sense in which the market outcome may in fact be biased against preference minorities, and we provide some conditions for such bias to occur. We then estimate the degree of bias in a particular indust...

  3. Production cost structure in US outpatient physical therapy health care.

    Science.gov (United States)

    Lubiani, Gregory G; Okunade, Albert A

    2013-02-01

    This paper investigates the technology cost structure in US physical therapy care. We exploit formal economic theories and a rich national data of providers to tease out implications for operational cost efficiencies. The 2008-2009 dataset comprising over 19 000 bi-weekly, site-specific physical therapy center observations across 28 US states and Occupational Employment Statistics data (Bureau of Labor Statistics) includes measures of output, three labor types (clinical, support, and administrative), and facilities (capital). We discuss findings from the iterative seemingly unrelated regression estimation system model. The generalized translog cost estimates indicate a well-behaved underlying technology structure. We also find the following: (i) factor demands are downwardly sloped; (ii) pair-wise factor relationships largely reflect substitutions; (iii) factor demand for physical therapists is more inelastic compared with that for administrative staff; and (iv) diminishing scale economies exist at the 25%, 50%, and 75% output (patient visits) levels. Our findings advance the timely economic understanding of operations in an increasingly important segment of the medical care sector that has, up-to-now (because of data paucity), been missing from healthcare efficiency analysis. Our work further provides baseline estimates for comparing operational efficiencies in physical therapy care after implementations of the 2010 US healthcare reforms. Copyright © 2012 John Wiley & Sons, Ltd.

  4. a cost-benefit analysis of farmer based seed production

    African Journals Online (AJOL)

    Prof. Adipala Ekwamu

    of farmer based common bean seed production in Kenya. The study used .... this limited our ability to assess the impact of management and other ... traditional method of broad casting seed rather than following the .... Handbook 1. Network on ...

  5. Life cycle costs for the optimized production of hydrogen and biogas from microalgae

    International Nuclear Information System (INIS)

    Meyer, Markus A.; Weiss, Annika

    2014-01-01

    Despite the known advantages of microalgae compared with other biomass providers or fossil fuels, microalgae are predominately produced for high-value products. Economic constraints might limit the commercial energetic use of microalgae. Therefore, we identify the LCCs (life cycle costs) and economic hot spots for photoautotrophic hydrogen generation from photoautotrophically grown Chlamydomonas reinhardtii in a novel staggered PBR (photobioreactor) and the anaerobic digestion of the residual biomass to obtain biogas. The novel PBR aims at minimizing energy consumption for mixing and aeration and at optimizing the light conditions for algal growth. The LCCs per MJ amounted to 12.17 Euro for hydrogen and 0.99 Euro for biogas in 2011 for Germany. Market prices per MJ of 0.02 Euro for biogas and 0.04 Euro for hydrogen are considerably exceeded. Major contributors to operating costs, about 70% of total LCCs, are personnel and overhead costs. The investment costs consist to about 92% of those for the PBR with a share of 61% membrane costs. The choice of Madrid as another production location with higher incident solar irradiation and lower personnel costs reduces LCCs by about 40%. Projecting LCCs to 2030 with experience curves, the LCCs still exceed future market prices. - Highlights: • Life cycle cost assessment of hydrogen and biogas from microalgae in a novel photobioreactor. • Current and future (2030) economically viable production unlikely in Germany. • Personnel and photobioreactor costs are major cost drivers. • Changing the production location may significantly reduce the life cycle costs

  6. Spatial and temporal aspects of grain accumulation costs for ethanol production: An Australian case study

    International Nuclear Information System (INIS)

    Anderton, Nikki; Kingwell, Ross

    2008-01-01

    Ethanol production is increasingly commonplace in many grain-producing regions. This paper uses the grain-producing region of south-western Australia to illustrate spatial and temporal aspects of grain accumulation costs for ethanol production. Specifically, this study examines how price variability of various wheat grades, combined with spatial and temporal variability in production of those grades, affects the costs of grain accumulation. These costs are the main components of an ethanol plant's operating costs so lessening these costs can offer a comparative advantage for a plant owner. Logistics models based on mathematical programming are constructed for a range of plant sizes and locations for ethanol production. Modelling results identify low-cost sites that generate cost savings, in present value terms, of between 5 and 7.5 per cent, depending on plant size, over the 9-year study period. At all locations, small to medium-sized plants offer advantages of lower and less variable costs of grain accumulation. Yet, all locations and all plant sizes are characterised by marked volatility in the cost of grain accumulation. The profitability of ethanol production based on wheat in this region of Australia is particularly exposed to any prolonged period of high grain prices relative to petroleum prices, given current biofuel-policy settings in Australia. (author)

  7. Comparing costs of power and heat production by prospective and present sources

    International Nuclear Information System (INIS)

    Novak, S.

    1979-01-01

    Capital and running costs are compared of power and heat production from different sources. The lowest capital costs were found for coal-fired power plants followed by light water reactor power plants. The capital costs of other types of power plants, such as wind, geothermal, solar, thermonuclear power plants are significantly higher. The estimated specific cost for electric power production in 1985 for a nuclear power plant is lower than for a fossil-fuel power plant. It is estimated that in 1985 coal will be the cheapest heat source. (Ha)

  8. A Comparison of Carbon Footprint and Production Cost of Different Pasta Products Based on Whole Egg and Pea Flour

    Directory of Open Access Journals (Sweden)

    Antonia Nette

    2016-03-01

    Full Text Available Feed and food production are inter alia reasons for high greenhouse gas emissions. Greenhouse gas emissions could be reduced by the replacement of animal components with plant components in processed food products, such as pasta. The main components currently used for pasta are semolina, and water, as well as additional egg. The hypothesis of this paper is that the substitution of whole egg with plant-based ingredients, for example from peas, in such a product might lead to reduced greenhouse gas emissions (GHG and thus a reduced carbon footprint at economically reasonable costs. The costs and carbon footprints of two pasta types, produced with egg or pea protein, are calculated. Plant protein–based pasta products proved to cause 0.57 kg CO2 equivalents (CO2eq (31% per kg pasta less greenhouse gas emissions than animal-based pasta, while the cost of production increases by 10% to 3.00 €/kg pasta.

  9. A Comparison of Carbon Footprint and Production Cost of Different Pasta Products Based on Whole Egg and Pea Flour

    Science.gov (United States)

    Nette, Antonia; Wolf, Patricia; Schlüter, Oliver; Meyer-Aurich, Andreas

    2016-01-01

    Feed and food production are inter alia reasons for high greenhouse gas emissions. Greenhouse gas emissions could be reduced by the replacement of animal components with plant components in processed food products, such as pasta. The main components currently used for pasta are semolina, and water, as well as additional egg. The hypothesis of this paper is that the substitution of whole egg with plant-based ingredients, for example from peas, in such a product might lead to reduced greenhouse gas emissions (GHG) and thus a reduced carbon footprint at economically reasonable costs. The costs and carbon footprints of two pasta types, produced with egg or pea protein, are calculated. Plant protein–based pasta products proved to cause 0.57 kg CO2 equivalents (CO2eq) (31%) per kg pasta less greenhouse gas emissions than animal-based pasta, while the cost of production increases by 10% to 3.00 €/kg pasta. PMID:28231112

  10. A Comparison of Carbon Footprint and Production Cost of Different Pasta Products Based on Whole Egg and Pea Flour.

    Science.gov (United States)

    Nette, Antonia; Wolf, Patricia; Schlüter, Oliver; Meyer-Aurich, Andreas

    2016-03-04

    Feed and food production are inter alia reasons for high greenhouse gas emissions. Greenhouse gas emissions could be reduced by the replacement of animal components with plant components in processed food products, such as pasta. The main components currently used for pasta are semolina, and water, as well as additional egg. The hypothesis of this paper is that the substitution of whole egg with plant-based ingredients, for example from peas, in such a product might lead to reduced greenhouse gas emissions (GHG) and thus a reduced carbon footprint at economically reasonable costs. The costs and carbon footprints of two pasta types, produced with egg or pea protein, are calculated. Plant protein-based pasta products proved to cause 0.57 kg CO₂ equivalents (CO₂eq) (31%) per kg pasta less greenhouse gas emissions than animal-based pasta, while the cost of production increases by 10% to 3.00 €/kg pasta.

  11. Hospital payroll costs, productivity, and employment under prospective reimbursement.

    Science.gov (United States)

    Kidder, D; Sullivan, D

    1982-12-01

    This paper reports preliminary findings from the National Hospital Rate-Setting Study regarding the effects of State prospective reimbursement (PR) programs on measures of payroll costs and employment in hospitals. PR effects were estimated through reduced-form equations, using American Hospital Association Annual Survey data on over 2,700 hospitals from 1969 through 1978. These tests suggest that hospitals responded to PR by lowering payroll expenditures. PR also seems to have been associated with reductions in full-time equivalent staff per adjusted inpatient day. However, tests did not confirm the hypothesis that hospitals reduce payroll per full-time equivalent staff as a result of PR.

  12. The Market Value and Cost of Solar Photovoltaic Electricity Production

    OpenAIRE

    Borenstein, Severin

    2008-01-01

    The high cost of power from solar photovoltaic (PV) panels has been a major deterrent to the technology’s market penetration. Proponents have argued, however, that typical analyses overlook many of the benefits of solar PV. Some of those benefits are in the realm of environmental and security externalities, but others occur within the electricity markets. In this paper, I attempt to do a more complete market valuation of solar PV. I incorporate the fact that power from solar PV panels is gene...

  13. Effects of housing system on the costs of commercial egg production.

    Science.gov (United States)

    Matthews, W A; Sumner, D A

    2015-03-01

    This article reports the first publicly available egg production costs compared across 3 hen-housing systems. We collected detailed data from 2 flock cycles from a commercial egg farm operating a conventional barn, an aviary, and an enriched colony system at the same location. The farm employed the same operational and accounting procedures for each housing system. Results provide clear evidence that egg production costs are much higher for the aviary system than the other 2 housing systems. Feed costs per dozen eggs are somewhat higher for the aviary and lower for the enriched house compared with the conventional house. Labor costs are much lower for the conventional house than the other 2, and pullet costs are much higher for the aviary. Energy and miscellaneous costs are a minimal part of total operating costs and do not differ by housing system. Total capital investments per hen-capacity are much higher for the aviary and the enriched house. Capital costs per dozen eggs depend on assumptions about appropriate interest and depreciation rates. Using the same 10% rate for each housing system shows capital costs per dozen for the aviary and the enriched housing system are much higher than capital costs per dozen for the conventional house. The aviary has average operating costs (feed, labor, pullet, energy, and miscellaneous costs that recur for each flock and vary with egg production) about 23% higher and average total costs about 36% higher compared with the conventional house. The enriched housing system has average operating costs only about 4% higher compared with the conventional house, but average total costs are 13% higher than for the conventional house. © The Author 2015. Published by Oxford University Press on behalf of Poultry Science Association.

  14. Effects of housing system on the costs of commercial egg production1

    Science.gov (United States)

    Matthews, W. A.; Sumner, D. A.

    2014-01-01

    This article reports the first publicly available egg production costs compared across 3 hen-housing systems. We collected detailed data from 2 flock cycles from a commercial egg farm operating a conventional barn, an aviary, and an enriched colony system at the same location. The farm employed the same operational and accounting procedures for each housing system. Results provide clear evidence that egg production costs are much higher for the aviary system than the other 2 housing systems. Feed costs per dozen eggs are somewhat higher for the aviary and lower for the enriched house compared with the conventional house. Labor costs are much lower for the conventional house than the other 2, and pullet costs are much higher for the aviary. Energy and miscellaneous costs are a minimal part of total operating costs and do not differ by housing system. Total capital investments per hen-capacity are much higher for the aviary and the enriched house. Capital costs per dozen eggs depend on assumptions about appropriate interest and depreciation rates. Using the same 10% rate for each housing system shows capital costs per dozen for the aviary and the enriched housing system are much higher than capital costs per dozen for the conventional house. The aviary has average operating costs (feed, labor, pullet, energy, and miscellaneous costs that recur for each flock and vary with egg production) about 23% higher and average total costs about 36% higher compared with the conventional house. The enriched housing system has average operating costs only about 4% higher compared with the conventional house, but average total costs are 13% higher than for the conventional house. PMID:25480736

  15. ISO 9000. Guidelines to increased costs and reduced product quality

    International Nuclear Information System (INIS)

    Reedy, R.F.

    1994-01-01

    Many US companies are considering being registered to the provisions of ISO 9000, International Standards for Quality Management. One important problem with the document is that ISO 9000 is not focused on control of product quality. The quality assurance rules established in ISO 9000 have been used in the US for more than 25 years with disastrous financial consequences and little, if any, improvement in quality and safety. These rules are so reliant on documentation and strict compliance that ensuring products comply with specifications has become a secondary issues. That is not what was intended, but it is the result. ISO 9000 program can work effectively only when the top executive responsible for engineering or production takes full responsibility for interpretation and implementation of the quality assurance program. 3 refs., 1 tab

  16. AN ECONOMIC STUDY OF ESTIMATING COST FUNCTION DATES PRODUCTION IN MURZUQ, SOUTHWESTERN LIBYA

    Directory of Open Access Journals (Sweden)

    Ahmad ARIDAH

    2014-06-01

    Full Text Available The results showed that fixed cost represented (41% of the total cost of Murzuq, also the variable cost amounted toapproximately (59% the total cost of Murzuq, and that the optimal size of the production of dates amounted toapproximately (2.01 tons per hectare for Murzuq ,and that production was more than the average actualproduction of dates for the Murzuq by nearly (0.37 tons per hectare , while reported results that the production thatmaximize profit of dates have hit (4.25 tons per hectare for Murzuq , and for community sample as a whole andthat production is more than the actual production of dates by (2.61 tons per hectare. It also showed the results ofthe field study that the average price per ton of harvest dates had been hit (1293.50 dinars for the total samplerespectively.

  17. Labor market productivity costs for caregivers of children with spina bifida: a population-based analysis.

    Science.gov (United States)

    Tilford, John M; Grosse, Scott D; Goodman, Allen C; Li, Kemeng

    2009-01-01

    Caregiver productivity costs are an important component of the overall cost of care for individuals with birth defects and developmental disabilities, yet few studies provide estimates for use in economic evaluations. This study estimates labor market productivity costs for caregivers of children and adolescents with spina bifida. Case families were recruited from a state birth defects registry in Arkansas. Primary caregivers of children with spina bifida (N = 98) reported their employment status in the past year and demographic characteristics. Controls were abstracted from the Current Population Survey covering the state of Arkansas for the same time period (N = 416). Estimates from regression analyses of labor market outcomes were used to calculate differences in hours worked per week and lifetime costs. Caregivers of children with spina bifida worked an annual average of 7.5 to 11.3 hours less per week depending on the disability severity. Differences in work hours by caregivers of children with spina bifida translated into lifetime costs of $133,755 in 2002 dollars using a 3% discount rate and an age- and sex-adjusted earnings profile. Including caregivers' labor market productivity costs in prevention effectiveness estimates raises the net cost savings per averted case of spina bifida by 48% over the medical care costs alone. Information on labor market productivity costs for caregivers can be used to better inform economic evaluations of prevention and treatment strategies for spina bifida. Cost-effectiveness calculations that omit caregiver productivity costs substantially overstate the net costs of the intervention and underestimate societal value.

  18. Alternative wind power modeling methods using chronological and load duration curve production cost models

    Energy Technology Data Exchange (ETDEWEB)

    Milligan, M R

    1996-04-01

    As an intermittent resource, capturing the temporal variation in windpower is an important issue in the context of utility production cost modeling. Many of the production cost models use a method that creates a cumulative probability distribution that is outside the time domain. The purpose of this report is to examine two production cost models that represent the two major model types: chronological and load duration cure models. This report is part of the ongoing research undertaken by the Wind Technology Division of the National Renewable Energy Laboratory in utility modeling and wind system integration.

  19. Impact on cost accuracy and profitability from implementing product configuration system – A case-study

    DEFF Research Database (Denmark)

    Myrodia, Anna; Kristjansdottir, Katrin; Hvam, Lars

    2015-01-01

    This article aims at analyzing the impacts from implementing a product configuration system (PCS) on company profitability and improved cost estimations in the sales phase. Companies that have implemented PCSs have achieved substantial benefits in terms of being more in control of their product...... assortment, making the right decisions in the sales phase and increased sales of optimal products. Those benefits should have direct impact on improved profitability in terms of increased contribution ratios and more accurate cost estimations used to determine the price in the budgetary quotations...... and accuracy of the cost estimation in the sales phase can be achieved from implementing a PCS....

  20. The Impact of Supply Chain Cost on the Price of the Final Product

    Directory of Open Access Journals (Sweden)

    Indrė Lapinskaitė

    2014-06-01

    Full Text Available Nowadays, as consumption and production are growing enormously fast, companies are seeking for costs reduction aimed at ensuring competitiveness. In manufacturing companies, supply chain expenses play a colossal role in the cost of the final product. This paper focuses on the main processes in the logistics chain and their components. The authors analyse the relationship between the sup- ply chain expenses and the price of the final product, the classification of logistics chain costs and their minimization as an assumption for the competitiveness of the final price.

  1. Guidelines for target costing adoption in the development of products for the residential real estate market

    Directory of Open Access Journals (Sweden)

    Reymard Savio Sampaio de Melo

    Full Text Available Abstract This study focuses on the problems associated with the traditional practice of reducing costs in construction and the need to increase business competitiveness in the residential real estate sector. In this context, target costing is a promising approach to improve the competitiveness of companies by ensuring that the products launched on the market do not jeopardize the company's results and value delivery to customers. However, far too little attention is paid to target costing implementation by companies that develop residential real state products for sale and face strong market competition. Thus, this paper seeks to investigate whether the standard framework of target costing in the literature applies - with or without adjustments - to real estate developers. Case study was the research strategy adopted. Guidelines are proposed for the introduction of target costing in the development process of residential real estate products. The proposed guidelines are related to the three main sections of the target costing process: market-driven costing, product-level target costing and component-level target costing.

  2. Increased Use of Productivity Management Can Help Control Government Costs.

    Science.gov (United States)

    1983-11-10

    estimated that 34 percent of agency spend- ing reductions made to balance the budget in fiscal year 1984 can be attributed to the productivity program. The...result in the services 5. [] use of employee incentives (9) of some employees no longer being required in the unit in which they 6. [) quality of worklife

  3. Cost-productivity analysis of South African pine sawtimber ...

    African Journals Online (AJOL)

    Understanding the productivity of these systems, for which data is currently limited for South Africa, is an important step to maximise the utilisation of machines being used. A time study of a mechanised cut-to-length system was conducted in Pinus elliottii sawtimber plantations in the Southern Cape forestry region of South ...

  4. Production costs of the Mexican poultry and pig sector

    NARCIS (Netherlands)

    Horne, van Peter; Hoste, Robert; Wagenberg, van Coen

    2018-01-01

    Wageningen Economic Research conducted a study on the potential consequences of a free trade agreement between Mexico and the EU. The Dutch government is concerned that giving access to products from countries with a lower level of animal welfare could undermine the EU welfare standard. This study

  5. Product costing guide for wood dimension and component manufacturers

    Science.gov (United States)

    Adrienn Andersch; Urs Buehlmann; Jeff Palmer; Janice K. Wiedenbeck; Steve. Lawser

    2014-01-01

    The North American hardwood dimension and components industry plays a critical role in the hardwood forest products industry as the industry is a user of high-value hardwood lumber. Customer expectations, global markets, and international competition, however, require hardwood dimension and components manufacturers to continuously improve their ability to manage their...

  6. ENERGY PRODUCTION AND RESIDENTIAL HEATING: TAXATION, SUBSIDIES, AND COMPARATIVE COSTS

    Science.gov (United States)

    This analysis is in support of the Ohio River Basin Energy Study (ORBES), a multidisciplinary policy research program supported by the Environmental Protection Agency. It examines the effect of economic incentives on public and private decisions affecting energy production and us...

  7. PRODUCTIVITY AND COSTS OF PROCESSOR WORKING IN STANDS OF Eucalyptus grandis Hill ex Maiden

    Directory of Open Access Journals (Sweden)

    Bernardo Carlos Tarnowski

    2009-09-01

    Full Text Available In the present work a time study was conducted with the objective of adjusting equations to estimate the time of activities, productivity, operational costs and the production of the processor used in a harvest operation of stands of Eucalyptus grandis in plain topography in the state of Bahia, Brazil. The operational cycle of the processor consisted of the time spent to process a tree, and was divided in to stages, which were assessed using the methotodology of single activity times. The sampling unit was the operational cycle of the machine. The statistical analysis was based on regression analysis considering the selection procedure “stepwise”. With the adjusted equations it was possible to estimate the productivity of the machine taking into account the of tree diameter. Considering an operational efficiency of 70 % under the circumstances of the study, the productivity of the processor was 25,8 m3 cc/h, the operational costs 47,90 US$/h and the production costs 1,86 US$/m3 cc. On the basis of the obtained results it can be concluded that the time of tree processing has varied directly according to the diameter increase diameter; the preparation time, contrary to the processing time, only shows a weak correlation with tree diameter; productivity of the processor is directly proportional to tree diameter, when expressed in volume and inversely proportional when expressed in tree number; the costs per cubic meter of wood processed varies inversely with of increased diameter; from the operational costs, fixed costs had the highest proportion followed by the variable costs, administrative costs and costs for manpower; the production costs of the processor decreased exponentially with increasing tree diameter.

  8. Environmental impacts and cost estimation for electricity production

    International Nuclear Information System (INIS)

    Devezeaux de Lavergne, J.G.

    2000-01-01

    This article reviews the different sources of energy used for electricity production in the view of the impact on environment. Coal, gas, wind energy, nuclear energy and hydro-energy are considered. The comparison of environmental performances requires common methodologies, 2 methodologies have been used ACV (analysis of a complete life cycle) and IPM (impact pathway methodology), both study all the exchanges of a system with the outside. The environmental performance is quantified by a series of parameters which represent the degradation of ecosystems. These parameters are divided into 4 groups: i) impact on public health, ii) impact on staff health, iii) impact on regional environment (agriculture, landscape alteration...) and iv) global impact on environment (greenhouse effect, acid rain, waste production, reduction of resources...). (A.C.)

  9. Costs and indices for domestic oil and gas field equipment and production operations, 1992--1995

    International Nuclear Information System (INIS)

    1996-08-01

    This report presents estimated costs and cost indices for domestic oil and natural gas field equipment and production operations for 1992, 1993, 1994, and 1995. The costs of all equipment and services are those in effect during June of each year. The sum (aggregates) of the costs for representative leases by region, depth, and production rate were averaged and indexed. This provides a general measure of the increased or decreased costs from year to year for lease equipment and operations. These general measured do not capture changes in industry-wide costs exactly because of annual variations in the ratio of the total number of oil wells to the total number of gas wells. The detail provided in this report is unavailable elsewhere. The body of this report contains summary tables, and the appendices contain detailed tables

  10. Tractor-logging costs and production in old-growth redwood forests

    Science.gov (United States)

    Kenneth N. Boe

    1963-01-01

    A cost accounting analysis of full-scale logging operations in old-growth redwood during 2 years revealed that it cost $12.24 per M bd. ft. (gross Scribner log scale) to get logs on trucks. Road development costs averaged another $5.19 per M bd. ft. Felling-bucking production was calculated by average tree d.b.h. Both skidding and loading outputs per hour were...

  11. Cost minimization in a full-scale conventional wastewater treatment plant: associated costs of biological energy consumption versus sludge production.

    Science.gov (United States)

    Sid, S; Volant, A; Lesage, G; Heran, M

    2017-11-01

    Energy consumption and sludge production minimization represent rising challenges for wastewater treatment plants (WWTPs). The goal of this study is to investigate how energy is consumed throughout the whole plant and how operating conditions affect this energy demand. A WWTP based on the activated sludge process was selected as a case study. Simulations were performed using a pre-compiled model implemented in GPS-X simulation software. Model validation was carried out by comparing experimental and modeling data of the dynamic behavior of the mixed liquor suspended solids (MLSS) concentration and nitrogen compounds concentration, energy consumption for aeration, mixing and sludge treatment and annual sludge production over a three year exercise. In this plant, the energy required for bioreactor aeration was calculated at approximately 44% of the total energy demand. A cost optimization strategy was applied by varying the MLSS concentrations (from 1 to 8 gTSS/L) while recording energy consumption, sludge production and effluent quality. An increase of MLSS led to an increase of the oxygen requirement for biomass aeration, but it also reduced total sludge production. Results permit identification of a key MLSS concentration allowing identification of the best compromise between levels of treatment required, biological energy demand and sludge production while minimizing the overall costs.

  12. Cost-effective production of bacterial cellulose using acidic food industry by-products.

    Science.gov (United States)

    Revin, Victor; Liyaskina, Elena; Nazarkina, Maria; Bogatyreva, Alena; Shchankin, Mikhail

    2018-03-13

    To reduce the cost of obtaining bacterial cellulose, acidic by-products of the alcohol and dairy industries were used without any pretreatment or addition of other nitrogen sources. Studies have shown that the greatest accumulation of bacterial cellulose (6.19g/L) occurs on wheat thin stillage for 3 days of cultivation under dynamic conditions, which is almost 3 times higher than on standard Hestrin and Schramm medium (2.14g/L). The use of whey as a nutrient medium makes it possible to obtain 5.45g/L bacterial cellulose under similar conditions of cultivation. It is established that the pH of the medium during the growth of Gluconacetobacter sucrofermentans B-11267 depends on the feedstock used and its initial value. By culturing the bacterium on thin stillage and whey, there is a decrease in the acidity of the waste. It is shown that the infrared spectra of bacterial cellulose obtained in a variety of environments have a similar character, but we found differences in the micromorphology and crystallinity of the resulting biopolymer. Copyright © 2018 Sociedade Brasileira de Microbiologia. Published by Elsevier Editora Ltda. All rights reserved.

  13. Production of durable and cost effective sewer pipes using petroleum and industrial waste by-products

    Directory of Open Access Journals (Sweden)

    El Gamal Maisa

    2017-01-01

    Full Text Available The Arabian Gulf environment has an adverse impact on concrete structures because of the high ambient temperature, humidity, salt contaminated dust, sea water and underground salts. As an innovative solution, reinforced modified sulfur concrete (MSC pipes are recognized as a durable and economical solution for deterioration of pipelines. This work describes the manufacture and characterization of new MSC based on a cost effective sulfur modification process. Bitumen, a by-product from crude oil refining process was used to modify elemental sulfur and enhance its physical, mechanical properties, and mostly to increase its corrosive resistivity. The study has focused on optimizing the proportions of an offered MSC mixes that are composed of modified sulfur (MS as a binder, crushed sand, dune sand and ladle furnace (LF slag as aggregates, and ground granulated blast furnace slag (GGFBS as a filler. To maximize the physical and mechanical properties of MSC sewer pipes, different mixtures were prepared and investigated. The optimum mix of MSC has a maximum compressive strength of 64 MPa, maximum splitting tensile strength of 4.5 MPa, maximum flexural strength of 21 MP, with a high corrosion resistance in acidic and salty environments.

  14. On information and communication technology and production cost in construction industry: evidence from the Netherlands

    NARCIS (Netherlands)

    van der Vlist, A.J; Vrolijk, M.H.; Dewulf, Geert P.M.R.

    2014-01-01

    The interplay between information and communication technology (ICT) and the competitiveness of construction firms is considered. More specifically, the question is whether firms that invest in information and communication technology have a production cost advantage. The economics literature

  15. Main means for reducing the production costs in process of leaching uranium

    International Nuclear Information System (INIS)

    Jiang Lang

    2000-01-01

    The production costs in process of leaching uranium have been reduced by controlling mixture ratio of crudes, milling particle size, liquid/solid mass ratio of leaching pulp, potential and residue acidity, and improving power equipment

  16. 76 FR 13168 - Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy

    Science.gov (United States)

    2011-03-10

    ... average unit costs of residential energy in a Federal Register notice entitled, ``Energy Conservation... DEPARTMENT OF ENERGY Office of Energy Efficiency and Renewable Energy Energy Conservation Program for Consumer Products: Representative Average Unit Costs of Energy AGENCY: Office of Energy Efficiency...

  17. Understanding the reductions in US corn ethanol production costs: an experience curve approach

    NARCIS (Netherlands)

    Hettinga, W.; Junginger, H.M.; Dekker, S.C.; Hoogwijk, M.; McAloon, A.; Hicks, K.

    2009-01-01

    The US is currently the world's largest ethanol producer. An increasing percentage is used as transportation fuel, but debates continue on its costs competitiveness and energy balance. In this study, technological development of ethanol production and resulting cost reductions are investigated by

  18. 19 CFR 351.407 - Calculation of constructed value and cost of production.

    Science.gov (United States)

    2010-04-01

    ... ANTIDUMPING AND COUNTERVAILING DUTIES Calculation of Export Price, Constructed Export Price, Fair Value, and Normal Value § 351.407 Calculation of constructed value and cost of production. (a) Introduction. This... 19 Customs Duties 3 2010-04-01 2010-04-01 false Calculation of constructed value and cost of...

  19. The production costs of the French nuclear fleet. Synthesis and conclusions. Technical note

    International Nuclear Information System (INIS)

    2017-09-01

    Whereas the French Energy Multi-year Programming (PPE) notably aims at preserving the purchasing power of consumers and the competitiveness of energy prices, this note aims at reporting an assessment of the production cost of the French present nuclear fleet, i.e. the electric power cost at the output of the production installation. The authors first discuss the choice for the methodology of 'cash costs' for the decision to continue of not the exploitation of existing units. They propose a mean assessment of about 33 euro/MWh, state that the present nuclear-based power production in France is profitable, and consider that there is no 'investment wall' to be faced in the near future. They also state that nuclear costs are hardly supposed to increase because they are little sensitive to uranium prices. They consider that dismantling and waste costs are covered at more than 100 per cent by dedicated assets. A technical note comes with this discussion. It discusses cost calculation methods, the assessment of the production cost of French existing reactors (second generation), and some additional elements regarding some cost components

  20. Interfirm and intrafirm switching costs in a vertical differentiation setting : Green versus non-green products

    NARCIS (Netherlands)

    Toolsema-Veldman, Linda

    2009-01-01

    In a vertical differentiation model where both duopolists supply the same two qualities of an otherwise homogeneous product, we derive the critical level of the interfirm switching cost needed to sustain monopoly pricing. In particular, we show how a decrease in the intrafirm switching cost may

  1. Marginal cost calculation of energy production in hydro thermoelectric systems considering the transmission system

    International Nuclear Information System (INIS)

    Pereira, M.V.F.; Gorenstin, B.G.; Alvarenga Filho, S.

    1989-01-01

    The alternatives for calculation of energy marginal cost in hydroelectric systems, considering the transmission one, was analysed, including fundamental concepts; generation/transmission systems, represented by linear power flow model; production marginal costs in hydrothermal systems and computation aspects. (C.G.C.). 11 refs, 5 figs

  2. Production rates and costs of cable yarding wood residue from clearcut units

    Science.gov (United States)

    Chris B. LeDoux

    1984-01-01

    Wood residue is a little used source of fiber, chips, and fuel because harvest costs are largely unknown. This study calculates incremental production rates and costs for yarding and loading logging residue in clearcut old-growth Douglas-fir/western hemlock forests. Harvest operations were observed for two timber sales in western Oregon. Three different cable yarding...

  3. Production and cost of harvesting, processing, and transporting small-diameter (< 5 inches) trees for energy

    Science.gov (United States)

    Fei Pan; Han-Sup Han; Leonard R. Johnson; William J. Elliot

    2008-01-01

    Dense, small-diameter stands generally require thinning from below to improve fire-tolerance. The resulting forest biomass can be used for energy production. The cost of harvesting, processing, and transporting small-diameter trees often exceeds revenues due to high costs associated with harvesting and transportation and low market values for forest biomass....

  4. An Instructional Exercise in Cost-Raising Strategies, and Perfect Complements Production

    Science.gov (United States)

    Weisman, Dennis L.

    2007-01-01

    The author presents an account of the 1993 contract negotiations between the United Auto Workers (UAW) and Ford Motor Company to assist students in developing facility with perfect complements production and cost functions and cost-raising strategies. The author seeks an answer to why the UAW targeted Ford for contract negotiations to establish a…

  5. Production cost comparisons of hydrogen from fossil and nuclear fuel and water decomposition

    Science.gov (United States)

    Ekman, K. R.

    1981-01-01

    The comparative costs entailed in producing hydrogen by major technologies that rely on petroleum, natural gas, coal, thermochemical cycles, and electrolysis are examined. Techniques were developed for comparing these processes by formulating the process data and economic assessments on a uniform and consistent basis. These data were normalized to permit a meaningful comparative analysis of product costs of these processes.

  6. Synthetic fuel production costs by means of solid oxide electrolysis cells

    DEFF Research Database (Denmark)

    Ridjan, Iva; Mathiesen, Brian Vad; Connolly, David

    2014-01-01

    The purpose of this paper is to provide an overview of fuel production costs for two types of synthetic fuels – methanol and methane, along with comparable costs for first and second generation biodiesel, two types of second generation bioethanol, and biogas. When analysing 100% renewable systems...

  7. Setting the holding cost rates in a multi-product system with remanufacturing

    NARCIS (Netherlands)

    U. Corbacı oğ lu; E.A. van der Laan (Erwin)

    2005-01-01

    textabstractThe Net Present Value (NPV) approach is considered to be the right approach to study inventory and production systems. But, approximate average cost (AC) approach is widely used in both practice and theory. However, the opportunity cost interpretation of AC framework is not that

  8. Costs and indices for domestic oil and gas field equipment and production operations 1994 through 1997

    International Nuclear Information System (INIS)

    1998-03-01

    This report presents estimated costs and cost indices for domestic oil and natural gas field equipment and production operations for 1994, 1995, 1996, and 1997. The costs of all equipment and services are those in effect during June of each year. The sums (aggregates) of the costs for representative leases by region, depth, and production rate were averaged and indexed. This provides a general measure of the increased or decreased costs from year to year for lease equipment and operations. These general measures do not capture changes in industry-wide costs exactly because of annual variations in the ratio of the total number of oil wells to the total number of gas wells. The detail provided in this report is unavailable elsewhere. The body of this report contains summary tables, and the appendices contain detailed tables. Price changes for oil and gas, changes in taxes on oil and gas revenues, and environmental factors (compliance costs and lease availability) have a significant impact on the number and cost of oil and gas wells drilled. These changes also impact the cost of oil and gas equipment and production operations

  9. Cost of paricá wood production in Paragominas region, Para State, Brazil

    Directory of Open Access Journals (Sweden)

    Rafaela da Silveira

    2017-12-01

    Full Text Available The silvicultural and economic potential of paricá (Schizolobium amazonicum has encouraged the expansion of this crop, mainly in the northern region of the country, provoking the need for studies on the species. The objective of this study was to estimate paricá production in Paragominas region, Para State, Brazil, at 5, 6 and 7 years, in three classes of productivity considering five plant arrangements, being identified the main costs of production, in addition to those most affected by plant arrangements. The volumetric estimation was obtained by modeling in population level and the analysis of the costs, through the methodology of the operational cost. It was possible to infer that the arrangement of plants 3 m x 2 m was superior in volume, compared to the other analyzed plant arrangements. The effective operating cost represented on average 65% of the total production costs. Transport was the most significant individual cost, in all analyzed plant arrangements. The maintenance, among the set of activities, was the most significant in planting, fact that may be related to the number and the long period for the activities execution. Smaller plant arrangements presented the higher total costs of production, depending or not on the remuneration for the use of the permanent and current capital.

  10. Health care costs, work productivity and activity impairment in non-malignant chronic pain patients

    DEFF Research Database (Denmark)

    Kronborg, Christian; Handberg, Gitte; Axelsen, Flemming

    2009-01-01

    This study explores the costs of non-malignant chronic pain in patients awaiting treatment in a multidisciplinary pain clinic in a hospital setting. Health care costs due to chronic pain are particular high during the first year after pain onset, and remain high compared with health care costs be...... before pain onset. The majority of chronic pain patients incur the costs of alternative treatments. Chronic pain causes production losses at work, as well as impairment of non-work activities.......This study explores the costs of non-malignant chronic pain in patients awaiting treatment in a multidisciplinary pain clinic in a hospital setting. Health care costs due to chronic pain are particular high during the first year after pain onset, and remain high compared with health care costs...

  11. Production costs: U.S. hydroelectric power plants, 4th Edition

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    The book provides 1991 operation and maintenance expenses for over 800 conventional and pumped-storage hydroelectric power plants. Report shows operator and plant name, plant year-in-service, installed capacity, 1991 net generation, O ampersand M expenses, total production costs and current plant capitalization. Fifty eight percent of the utility-owned hydroelectric plants in the US are covered by this report. Data diskette provides additional capital and production cost accounts and number of employees for each plant

  12. THE PRODUCTION COSTS OF CONVENTIONAL AND ORGANIC APPLE ORCHARDS IN THE VENETO REGION (ITALY)

    OpenAIRE

    CIMPAN Oana; BEGALLI Diego; CODURRI Stefano

    2012-01-01

    In times of crisis people are thinking how to make the best choice to be more profitable. Both the manufacturers and the consumers must choose the best solutions for them and their businesses. Making a choice between organic and conventional methods in times of crisis is even more difficult considering production costs and consumption patterns. What is the composition of production costs for an apple orchard, how they can be divided into homogeneous categories and why to choose green are the ...

  13. Public synthesis of the reference costs study of the electric power production

    International Nuclear Information System (INIS)

    2008-01-01

    Every 3 or 5 years, the DGEC published the reference costs study of the electric power production which evaluates, in a theoretical framework, the total cost of an electrical MWh, from different production ways. These studies bring information for the definition of the energy policy and the elaboration of the investments program. because of the great competition of the market, it was decided not to publish the absolute value of the hypothesis and the results but under indexed form. (A.L.B.)

  14. Effects of Variable Production Rate and Time-Dependent Holding Cost for Complementary Products in Supply Chain Model

    Directory of Open Access Journals (Sweden)

    Mitali Sarkar

    2017-01-01

    Full Text Available Recently, a major trend is going to redesign a production system by controlling or making variable the production rate within some fixed interval to maintain the optimal level. This strategy is more effective when the holding cost is time-dependent as it is interrelated with holding duration of products and rate of production. An effort is made to make a supply chain model (SCM to show the joint effect of variable production rate and time-varying holding cost for specific type of complementary products, where those products are made by two different manufacturers and a common retailer makes them bundle and sells bundles to end customers. Demand of each product is specified by stochastic reservation prices with a known potential market size. Those players of the SCM are considered with unequal power. Stackelberg game approach is employed to obtain global optimum solution of the model. An illustrative numerical example, graphical representation, and managerial insights are given to illustrate the model. Results prove that variable production rate and time-dependent holding cost save more than existing literature.

  15. Analysis of the production and transaction costs of forest carbon offset projects in the USA.

    Science.gov (United States)

    Galik, Christopher S; Cooley, David M; Baker, Justin S

    2012-12-15

    Forest carbon offset project implementation costs, comprised of both production and transaction costs, could present an important barrier to private landowner participation in carbon offset markets. These costs likewise represent a largely undocumented component of forest carbon offset potential. Using a custom spreadsheet model and accounting tool, this study examines the implementation costs of different forest offset project types operating in different forest types under different accounting and sampling methodologies. Sensitivity results are summarized concisely through response surface regression analysis to illustrate the relative effect of project-specific variables on total implementation costs. Results suggest that transaction costs may represent a relatively small percentage of total project implementation costs - generally less than 25% of the total. Results also show that carbon accounting methods, specifically the method used to establish project baseline, may be among the most important factors in driving implementation costs on a per-ton-of-carbon-sequestered basis, dramatically increasing variability in both transaction and production costs. This suggests that accounting could be a large driver in the financial viability of forest offset projects, with transaction costs likely being of largest concern to those projects at the margin. Copyright © 2012 Elsevier Ltd. All rights reserved.

  16. Improving Power System Modeling. A Tool to Link Capacity Expansion and Production Cost Models

    Energy Technology Data Exchange (ETDEWEB)

    Diakov, Victor [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cole, Wesley [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sullivan, Patrick [National Renewable Energy Lab. (NREL), Golden, CO (United States); Brinkman, Gregory [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-11-01

    Capacity expansion models (CEM) provide a high-level long-term view at the prospects of the evolving power system. In simulating the possibilities of long-term capacity expansion, it is important to maintain the viability of power system operation in the short-term (daily, hourly and sub-hourly) scales. Production-cost models (PCM) simulate routine power system operation on these shorter time scales using detailed load, transmission and generation fleet data by minimizing production costs and following reliability requirements. When based on CEM 'predictions' about generating unit retirements and buildup, PCM provide more detailed simulation for the short-term system operation and, consequently, may confirm the validity of capacity expansion predictions. Further, production cost model simulations of a system that is based on capacity expansion model solution are 'evolutionary' sound: the generator mix is the result of logical sequence of unit retirement and buildup resulting from policy and incentives. The above has motivated us to bridge CEM with PCM by building a capacity expansion - to - production cost model Linking Tool (CEPCoLT). The Linking Tool is built to onset capacity expansion model prescriptions onto production cost model inputs. NREL's ReEDS and Energy Examplar's PLEXOS are the capacity expansion and the production cost models, respectively. Via the Linking Tool, PLEXOS provides details of operation for the regionally-defined ReEDS scenarios.

  17. INDIRECT COSTS ALLOCATION AND DECISION MAKING IN AGRICULTURAL PRODUCTION

    Directory of Open Access Journals (Sweden)

    M. Karić

    2001-06-01

    Full Text Available The paper introduces a research on the changes occurred inside the accounting system of agricultural organisations in the transitional period. Changes of structure and accounting information system being results of privatisation processes were analysed. The introduction of modern methods in the preparation of relevant management information represents one of the preconditions for development of the privatised agricultural organisation during the transition period. Information prepared by the accounting, especially adapted to management requirements, is essential for rational decision making. Modern management system of reporting is fundamental task of management and a precondition for securing competitive production in agricultural industry. For this reason, it is necessary to define areas of responsibility and to enable application of a modern techniques for calculating expenses. The purpose of this paper is to emphasise the specialised use of accounting information by managers and to develop methods of management reporting in agricultural organisations. We propose an emphasis upon the application of modern management accounting techniques rather than financial accounting reporting approach. We support the contention that the need for high-quality management accounting is not debatable and tend to explain how and why accounting information is developed for the individual parts of a business entity, that is for each department or enterprise of an agricultural organisation. The responsibility accounting system should be introduced in agricultural business entities within our conditions, especially in larger organisations, as a measure of securing competitive production. We emphasise the importance of distinguishing between direct and indirect expenses and of using appropriate methods to allocate expenses among departments or enterprises. The research is based on information directly received from the largest agricultural companies in the area of

  18. REDUCING POWER PRODUCTION COSTS BY UTILIZING PETROLEUM COKE

    Energy Technology Data Exchange (ETDEWEB)

    Kevin C. Galbreath; Donald L. Toman; Christopher J. Zygarlicke

    1999-09-01

    Petroleum coke, a byproduct of the petroleum-refining process, is an attractive primary or supplemental fuel for power production primarily because of a progressive and predictable increase in the production volumes of petroleum coke (1, 2). Petroleum coke is most commonly blended with coal in proportions suitable to meet sulfur emission compliance. Petroleum coke is generally less reactive than coal; therefore, the cofiring of petroleum coke with coal typically improves ignition, flame stability, and carbon loss relative to the combustion of petroleum coke alone. Although petroleum coke is a desirable fuel for producing relatively inexpensive electrical power, concerns about the effects of petroleum coke blending on combustion and pollution control processes exist in the coal-fired utility industry (3). The Energy & Environmental Research Center (EERC) completed a 2-year technical assessment of petroleum coke as a supplemental fuel. A survey questionnaire was sent to seven electric utility companies that are currently cofiring coal and petroleum coke in an effort to solicit specific suggestions on research needs and fuel selections. An example of the letter and survey questionnaire is presented in Appendix A. Interest was expressed by most utilities in evaluating the effects of petroleum coke blending on grindability, combustion reactivity, fouling, slagging, and fly ash emissions control. Unexpectedly, concern over corrosion was not expressed by the utilities contacted. Although all seven utilities responded to the question, only two utilities, Northern States Power Company (NSP) and Ameren, sent fuels to the EERC for evaluation. Both utilities sent subbituminous coals from the Power River Basin and petroleum shot coke samples. Petroleum shot coke is produced unintentionally during operational upsets in the petroleum refining process. This report evaluates the effects of petroleum shot coke blending on grindability, fuel reactivity, fouling/slagging, and

  19. Cheese whey: A cost-effective alternative for hyaluronic acid production by Streptococcus zooepidemicus.

    Science.gov (United States)

    Amado, Isabel R; Vázquez, José A; Pastrana, Lorenzo; Teixeira, José A

    2016-05-01

    This study focuses on the optimisation of cheese whey formulated media for the production of hyaluronic acid (HA) by Streptococcus zooepidemicus. Culture media containing whey (W; 2.1g/L) or whey hydrolysate (WH; 2.4 g/L) gave the highest HA productions. Both W and WH produced high yields on protein consumed, suggesting cheese whey is a good nitrogen source for S. zooepidemicus production of HA. Polysaccharide concentrations of 4.0 g/L and 3.2g/L were produced in W and WH in a further scale-up to 5L bioreactors, confirming the suitability of the low-cost nitrogen source. Cheese whey culture media provided high molecular weight (>3000 kDa) HA products. This study revealed replacing the commercial peptone by the low-cost alternative could reduce HA production costs by up to a 70% compared to synthetic media. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Cost-effective IMTA: a comparison of the production efficiencies of mussels and seaweed

    DEFF Research Database (Denmark)

    Holdt, Susan Løvstad; Edwards, M. D.

    results compared to production cost of €209-672 kg-1 N removed and €1,013 kg-1 N removed for respectively Laminaria digitata and Alaria esculenta from extrapolated laboratory and field trials. However, a commercial seaweed (Saccharina latissima) producer claims that production costs are less than €10 kg-1...... N removed. This up-scaled and commercial figure makes the seaweed cost competitive to mussels for removal of nitrogen. Disadvantages such as predators (e.g. eider ducks) and bio-fouling should also be taken into account before choice of biofilter is made. These drawbacks can reduce overall biofilter...

  1. Energy balance and cost analysis for raisin production in Aegean Region in Turkey

    Directory of Open Access Journals (Sweden)

    Uysal Hülya

    2016-01-01

    Full Text Available The aim of this study is to determine energy consumption of input and output used in raisin production and making a cost analysis in Aegean Region. Energy output-input analysis is generally done to determine the scope of environment and energy efficiency of agricultural production. In this study the cost of raisin production was calculated by Manisa Viticulture Research Institute's records in 2015. Costs of inputs and prices of raisin were obtained from various sources such as Turkish Statistical Institute, Aegean Exporters' Association and Turkish Ministry of Food, Agriculture and Livestock. The total energy input necessity for raisin production was 39,066.91 MJ/ha. The research results indicated that the total energy input used for raisin was mainly dependent on non-renewable energy forms (%97. The high ratio of non-renewable energy in the total used energy inputs causes negative effects on the sustainability in agricultural production. Among input energy sources, diesel oil, chemical fertilizers and electricity contained highest energy shares with 34.30%, 26.96%, and 22.50% respectively. The energy ratio and energy productivity were found to be 6.04 and 0.51 kg/MJ. Gross production value and total variable costs for raisin were $ 8,600 and $ 4,528.25, respectively. As a result of cost analysis, gross margin was calculated as $ 4,071.75.

  2. Internalization of external cost for the production and distribution of electricity in Flanders, Belgium

    International Nuclear Information System (INIS)

    Torfs, R.; De Nocker, L.; Schrooten, L.; Aernouts, K.; Liekens, I.

    2005-04-01

    This report elaborates the external costs of electricity production and distribution in Flanders, Belgium, and tests them against prices and taxes for electricity use. The authors examined whether these external costs decrease in time and whether such a decrease leads to internalization in the price for the users through taxes, levies or other economic instruments. The external costs mainly include external environmental costs caused by air pollution and greenhouse gases, but also damage caused by accidents, hindrance and radioactive substances that may be released. [nl

  3. Productivity Costs Associated With Breast Cancer Among Survivors Aged 18-44 Years.

    Science.gov (United States)

    Ekwueme, Donatus U; Trogdon, Justin G; Khavjou, Olga A; Guy, Gery P

    2016-02-01

    No study has quantified productivity losses associated with breast cancer in younger women aged 18-44 years. This study estimated productivity costs, including work and home productivity losses, among younger women who reported ever receiving a breast cancer diagnosis. A two-part regression model and 2000-2010 National Health Interview Survey data were used to estimate the number of work and home productivity days missed because of breast cancer, adjusted for socioeconomic characteristics and comorbidities. Estimates for younger women were compared with those for women aged 45-64 years. Data were analyzed in 2013-2014. Per capita, younger women with breast cancer had annual losses of $2,293 (95% CI=$1,069, $3,518) from missed work and $442 (95% CI=$161, $723) from missed home productivity. Total annual breast cancer-associated productivity costs for younger women were $344 million (95% CI=$154 million, $535 million). Older women with breast cancer had lower per capita work loss productivity costs of $1,407 (95% CI=$899, $1,915) but higher total work loss productivity costs estimated at $1,072 million (95% CI=$685 million, $1,460 million) than younger women. Younger women with a history of breast cancer face a disproportionate share of work and home productivity losses. Although older women have lower per capita costs, total productivity costs were higher for older women because the number of older women with breast cancer is higher. The results underscore the importance of continued efforts by the public health community to promote and support the unique needs of younger breast cancer survivors. Published by Elsevier Inc.

  4. Costs and indices for domestic oil and gas field equipment and production operations 1990 through 1993

    International Nuclear Information System (INIS)

    1994-01-01

    This report presents estimated costs and indice for domestic oil and gas field equipment and production operations for 1990, 1991, 1992, and 1993. The costs of all equipment and serives were those in effect during June of each year. The sums (aggregates) of the costs for representative leases by region, depth, and production rate were averaged and indexed. This provides a general measure of the increased or decreased costs from year to year for lease equipment and operations. These general measures do not capture changes in industry-wide costs exactly because of annual variations in the ratio of oil wells to gas wells. The body of the report contains summary tables, and the appendices contain detailed tables. Price changes for oil and gas, changes in taxes on oil and gas revenues, and environmental factors (costs and lease availability) have significant impact on the number and cost of oil and gas wells drilled. These changes also impact the cost of oil and gas production equipment and operations

  5. Costs and indices for domestic oil and gas field equipment and production operations 1990 through 1993

    Energy Technology Data Exchange (ETDEWEB)

    1994-07-08

    This report presents estimated costs and indice for domestic oil and gas field equipment and production operations for 1990, 1991, 1992, and 1993. The costs of all equipment and serives were those in effect during June of each year. The sums (aggregates) of the costs for representative leases by region, depth, and production rate were averaged and indexed. This provides a general measure of the increased or decreased costs from year to year for lease equipment and operations. These general measures do not capture changes in industry-wide costs exactly because of annual variations in the ratio of oil wells to gas wells. The body of the report contains summary tables, and the appendices contain detailed tables. Price changes for oil and gas, changes in taxes on oil and gas revenues, and environmental factors (costs and lease availability) have significant impact on the number and cost of oil and gas wells drilled. These changes also impact the cost of oil and gas production equipment and operations.

  6. The Relationship Between Job Satisfaction and Productivity-Related Costs: A Longitudinal Analysis.

    Science.gov (United States)

    Arnold, Amélie E; Coffeng, Jennifer K; Boot, Cécile R L; van der Beek, Allard J; van Tulder, Maurits W; Nieboer, Dagmar; van Dongen, Johanna M

    2016-09-01

    The aim of this study was to examine the longitudinal relationship between job satisfaction and total productivity-related costs, and between job satisfaction and absenteeism and presenteeism costs separately. A secondary aim was to explore whether these relationships differed across job types. Linear generalized estimating equation analyses were used to explore the longitudinal relationships. To explore whether the relationships differed across job types, stratified analyses were performed. A significant relationship was found between job satisfaction and total productivity-related costs [β = &OV0556;-273; 95% confidence interval (95% CI): -407 to -200] and between job satisfaction and presenteeism costs (β = &OV0556;-276; 95% CI: -367 to -235), but not between job satisfaction and absenteeism costs. These relationships differed across job types. Higher levels of job satisfaction were longitudinally related to lower total productivity-related costs and presenteeism costs, but not to lower absenteeism costs. These relationships seem to differ across job types.

  7. Impact cost of the product on the effectiveness of business organizations

    Directory of Open Access Journals (Sweden)

    A. S. Senin

    2015-01-01

    Full Text Available One of the key elements of managing the operations of the organization - management costs, as the costs, representing the payment that needs to be done to attract and retain economic resources, are one of the main factors determining the size of the financial results of the organization, return on invested capital, and, ultimately, the value of the business.Objectives. The aim of this work is to study the influence of the structure of production costs on the profitability of products.Method’s. To complete this article were used such methods of analysis as legal, comparative, economic-statistical and correlation.Conclusions / significance. The practical value of this work lies in the fact that in the article the notion and cogs, equations of linear regression between the proportion of costs in the cost and profitability of products by types of economic activity in the Russian Federation in 2012, the Obtained models allow knowing the share of costs in the cost structure for different types of economic activities in the Russian Federation in 2012 to estimate the average level of profitability of production.

  8. Logistics cost analysis of rice residues for second generation bioenergy production in Ghana.

    Science.gov (United States)

    Vijay Ramamurthi, Pooja; Cristina Fernandes, Maria; Sieverts Nielsen, Per; Pedro Nunes, Clemente

    2014-12-01

    This study explores the techno-economic potential of rice residues as a bioenergy resource to meet Ghana's energy demands. Major rice growing regions of Ghana have 70-90% of residues available for bioenergy production. To ensure cost-effective biomass logistics, a thorough cost analysis was made for two bioenergy routes. Logistics costs for a 5 MWe straw combustion plant were 39.01, 47.52 and 47.89 USD/t for Northern, Ashanti and Volta regions respectively. Logistics cost for a 0.25 MWe husk gasification plant (with roundtrip distance 10 km) was 2.64 USD/t in all regions. Capital cost (66-72%) contributes significantly to total logistics costs of straw, however for husk logistics, staff (40%) and operation and maintenance costs (46%) dominate. Baling is the major processing logistic cost for straw, contributing to 46-48% of total costs. Scale of straw unit does not have a large impact on logistic costs. Transport distance of husks has considerable impact on logistic costs. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Analysis of the influence of advanced materials for aerospace products R and D and manufacturing cost

    International Nuclear Information System (INIS)

    Shen, A W; Guo, J L; Wang, Z J

    2015-01-01

    In this paper, we pointed out the deficiency of traditional cost estimation model about aerospace products Research and Development (R and D) and manufacturing based on analyzing the widely use of advanced materials in aviation products. Then we put up with the estimating formulas of cost factor, which representing the influences of advanced materials on the labor cost rate and manufacturing materials cost rate. The values ranges of the common advanced materials such as composite materials, titanium alloy are present in the labor and materials two aspects. Finally, we estimate the R and D and manufacturing cost of F/A-18, F/A- 22, B-1B and B-2 aircraft based on the common DAPCA IV model and the modified model proposed by this paper. The calculation results show that the calculation precision improved greatly by the proposed method which considering advanced materials. So we can know the proposed method is scientific and reasonable. (paper)

  10. Analysis of the influence of advanced materials for aerospace products R&D and manufacturing cost

    Science.gov (United States)

    Shen, A. W.; Guo, J. L.; Wang, Z. J.

    2015-12-01

    In this paper, we pointed out the deficiency of traditional cost estimation model about aerospace products Research & Development (R&D) and manufacturing based on analyzing the widely use of advanced materials in aviation products. Then we put up with the estimating formulas of cost factor, which representing the influences of advanced materials on the labor cost rate and manufacturing materials cost rate. The values ranges of the common advanced materials such as composite materials, titanium alloy are present in the labor and materials two aspects. Finally, we estimate the R&D and manufacturing cost of F/A-18, F/A- 22, B-1B and B-2 aircraft based on the common DAPCA IV model and the modified model proposed by this paper. The calculation results show that the calculation precision improved greatly by the proposed method which considering advanced materials. So we can know the proposed method is scientific and reasonable.

  11. Structure of production costs of different energy sources (fossile fuels and nuclear energy) (group 11)

    International Nuclear Information System (INIS)

    Girard, Ph.

    2002-01-01

    This article is the work of a group of students from the ''Ecole Nationale d'Administration'', they had to study the structure of the costs of the different energy sources. This analysis shows some common features between the energy sources. The cost is very dependent on the partial costs of technological constraints due to exploration, production, transport and distribution. For primary energies the market appears to be not very competitive, the price depends strongly on the market power of the operator and benefits are generally important. In France, taxes play a role to assure competitiveness of gas and coal against oil. Uranium fuel presents the lowest production and transformation costs at the same energy content. Transport costs are important for natural gas which implies a strong mutual dependence between gas producers and consumers. The irreplaceable use of oil in transport assures regular high revenues for oil companies. (A.C.)

  12. Optimal replacement policy of products with repair-cost threshold after the extended warranty

    Institute of Scientific and Technical Information of China (English)

    Lijun Shang; Zhiqiang Cai

    2017-01-01

    The reliability of the product sold under a warranty is usually maintained by the manufacturer during the warranty period. After the expiry of the warranty, however, the consumer confronts a problem about how to maintain the reliability of the product. This paper proposes, from the consumer's perspective, a replace-ment policy after the extended warranty, under the assumption that the product is sold under the renewable free replacement warranty (RFRW) policy in which the replacement is dependent on the repair-cost threshold. The proposed replacement policy is the replacement after the extended warranty is performed by the consumer based on the repair-cost threshold or preventive replacement (PR) age, which are decision variables. The expected cost rate model is derived from the consumer's perspective. The existence and uniqueness of the optimal solution that minimizes the expected cost rate per unit time are offered. Finally, a numeri-cal example is presented to exemplify the proposed model.

  13. Uranium Mill Tailings Remedial Action Project: Cost Reduction and Productivity Improvement Program Project Plan

    International Nuclear Information System (INIS)

    1991-11-01

    The purpose of the Cost Reduction/Productivity Improvement Program Plan is to formalize and improve upon existing efforts to control costs which have been underway since project inception. This program plan has been coordinated with the Department of Energy (DOE) Office of Environmental Management (EM) and the DOE Field Office, Albuquerque (AL). It incorporates prior Uranium Mill Tallings Remedial Action (UMTRA) Project Office guidance issued on the subject. The opportunities for reducing cosh and improving productivity are endless. The CR/PIP has these primary objectives: Improve productivity and quality; heighten the general cost consciousness of project participants, at all levels of their organizations; identify and implement specific innovative employee ideas that extend beyond what is required through existing processes and procedures; emphasize efforts that create additional value for the money spent by maintaining the project Total Estimated Cost (TEC) at the lowest possible level

  14. A probabilistic production costing analysis of SO2 emissions reduction strategies for Ohio: emissions, costs and employment tradeoffs

    International Nuclear Information System (INIS)

    Heslin, J.S.; Hobbs, B.F.

    1991-01-01

    A new approach for state- and utility-level analysis of the cost and regional economic impacts of strategies for reducing utility SO 2 emissions is summarized and applied to Ohio. The methodology is based upon probabilistic production costing and economic input-output analysis. It is an improvement over previous approaches because it: (1) accurately models random outages of generating units, 'must-run' constraints on unit output, and the distribution of power demands; and (2) runs quickly on a microcomputer and yet considers the entire range of potential control strategies from a systems perspective. The input-output analysis considers not only the economic effects of utility fuel use and capital investment, but also those of increased electric rates. Two distinct strategies are found to be most attractive for Ohio. The first, more flexible one, consists of emissions dispatching (ED) alone to meet short run emissions reduction targets. A 75 percent reduction can then be achieved by the turn of the century by combining ED and fuel switching (FS) with flue gas desulfurization, limestone injection multistage burners, and physical coal cleaning at selected plants. The second is a scrubber-based strategy which includes ED. By the year 2000, energy conservation becomes a cost effective component of these strategies. In order to minimize compliance costs, acid rain legislation which facilitates emission trading and places regional tonnage limits on emissions is desirable

  15. Costs and Returns of Yam/Maize Production in Bosso Local ...

    African Journals Online (AJOL)

    In Nigeria, yam is the most important stable food crop while maize is the third most important cereal crop. However, small scale farmers do not always realize appreciable net returns from their combined production. Therefore, this study examined the costs and returns of yam/maize (mixed cropping) production in Bosso ...

  16. Analyzing cost efficient production behavior under economies of scope : A nonparametric methodology

    NARCIS (Netherlands)

    Cherchye, L.J.H.; de Rock, B.; Vermeulen, F.M.P.

    2008-01-01

    In designing a production model for firms that generate multiple outputs, we take as a starting point that such multioutput production refers to economies of scope, which in turn originate from joint input use and input externalities. We provide a nonparametric characterization of cost-efficient

  17. Analyzing Cost Efficient Production Behavior Under Economies of Scope : A Nonparametric Methodology

    NARCIS (Netherlands)

    Cherchye, L.J.H.; de Rock, B.; Vermeulen, F.M.P.

    2006-01-01

    In designing a production model for firms that generate multiple outputs, we take as a starting point that such multi-output production refers to economies of scope, which in turn originate from joint input use and input externalities. We provide a nonparametric characterization of cost efficient

  18. Investment in cocoa production in Nigeria: A cost and return analysis ...

    African Journals Online (AJOL)

    The study examined costs and returns in cocoa production in Cross River State by comparing three identified management systems of cocoa production in the area. A two-stage sampling procedure was used to select a hundred and fifty cocoa farmers for the study. Data used in the study were collected using structured ...

  19. The cost analysis of material handling in Chinese traditional praying paper production plant

    Science.gov (United States)

    Nasution, H.; Budiman, I.; Salim, A.

    2018-02-01

    Chinese traditional praying paper industry is an industry which produced Chinese traditional religion praying paper. This kind of industry is rarely examined since it was only in Small and Medium Enterprise (SME’s- form). This industry produced various kinds of Chinese traditional paper products. The purpose of this research is to increase the amount of production, reduce waiting time and moving time, and reduce material handling cost. The research was conducted at prime production activities, consists of: calculate the capacity of the material handler, the frequency of movement, cost of material handling, and total cost of material handling. This displacement condition leads to an ineffective and inefficient production process. The alternative was developed using production judgment and aisle standard. Based on the observation results, it is possible to reduce displacement in the production. Using alternative which by-passed displacement from a rolled paper in the temporary warehouse to cutting and printing workstation, it can reduce material handling cost from 2.26 million rupiahs to 2.00 million rupiahs only for each batch of production. This result leads to increasing of production quantity, reducing waiting and moving time about 10% from the current condition.

  20. Felling and skidding productivity and harvesting cost in southern pine forests

    Science.gov (United States)

    R.A. Kluender; B.J. Stokes

    1996-01-01

    Sixteen stands were harvested at various levels of basal area removed (intensity). Chainsaw felling productivity was more sensitive to stem diameter than harvest intensity. Skidding productivity was highest when removing large trees at high intensity. Harvesting cost was more sensitive to stem size than harvest intensity, although harvest intensity was a very important...

  1. Economic feasibility of invesment alternatives for reducing torula yeast' production cost

    International Nuclear Information System (INIS)

    Torres Fernández, Alfredo; Díaz de los Ríos, Manuel; Saura Laria, Gustavo

    2016-01-01

    The prices of ammonium salts which are used in the torula yeast production technology are very high nowadays. In the other hand, this technology has very high energy costs which are consumed by blowers in fermentation, separators machines and in the concentration and drying of yeast. In this paper, different technical alternatives are analyzed for reducing the production cost of torula yeast, through changes in production inputs, electric motors and the replacement of a portion of the fuel used for drying by biogas. Then, the economic feasibility in both currencies is evaluated for practical application. (author)

  2. ECONOMIC FEASIBILITY OF INVESMENT ALTERNATIVES FOR REDUCING TORULA YEAST' PRODUCTION COST

    Directory of Open Access Journals (Sweden)

    Alfredo Torres Fernández

    2016-01-01

    Full Text Available The prices of ammonium salts which are used in the torula yeast production technology are very high nowadays. In the other hand, this technology has very high energy costs which are consumed by blowers in fermentation, separators machines and in the concentration and drying of yeast. In this paper, different technical alternatives are analyzed for reducing the production cost of torula yeast, through changes in production inputs, electric motors and the replacement of a portion of the fuel used for drying by biogas. Then, the economic feasibility in both currencies is evaluated for practical application.

  3. Determination of the fuel component in the cost price of the energy production in NPP

    International Nuclear Information System (INIS)

    Lakov, M.; Velev, V.

    1997-01-01

    An approach is proposed for the determination of the fuel component in the cost price of the nuclear units production with regards of the difference between the time of the fuel consumption and the energy production. This method gives the opportunity for fuel consumption prognostication, as well as an optimization of both short and long term fueling regimes. This approach permits current update of the economic conditions and the pre-history of the investments. It can be used both for the determination of the fuel component and the full cost price of the energy production in NPPs.(author)

  4. THE IMPACT OF THE BASIC ASSETS EFFICIENCY ON THE OF CONSTRUCTION PRODUCTS COST PRICE

    Directory of Open Access Journals (Sweden)

    M. Z. Zeynalov

    2015-01-01

    Full Text Available In article are considered problems of the analysis of the influence mode to usages and conditions of the building technology and facilities to mechanizations on prime cost produced building product. It is offered original scheme intercropping the factors, in accordance with influence of the working expenses of the facilities of the lab our on prime cost of the building product. The offered methods of the estimation physical wear-out level of the building technology and competitiveness of the active part of production assets of the building enterprise.

  5. Electric energy costs and firm productivity in the countries of the Pacific Alliance

    Science.gov (United States)

    Camacho, Anamaria

    This paper explores the relation between energy as an input of production and firm-level productivity for Chile, Colombia, Mexico and Peru, all country members of the Pacific Alliance economic bloc. The empirical literature, has explored the impact of infrastructure on productivity; however there is limited analysis on the impact of particular infrastructure variables, such as energy, on productivity at the firm level in Latin America. Therefore, this study conducts a quantitative assessment of the responsiveness of productivity to energy cost and quality for Chile, Colombia, Mexico and Peru. For this, the empirical strategy is to estimate a Cobb-Douglas production function using the World Bank's Enterprise Survey to obtain comparable measures of output and inputs of production. This approach provides estimates of input factor elasticities for all of the factors of production including energy. The results indicate that electric energy costs explain cross-country differences in firm level productivity. For the particular case of Colombia, the country exhibits the lowest capital and labor productivity of the PA, and firm output is highly responsive to changes in energy use. As a result, the evidence suggests that policies reducing electric energy costs are an efficient alternative to increase firm performance, particularly in the case of Colombia.

  6. Strategies for cost-effective and enhanced production of bacterial cellulose.

    Science.gov (United States)

    Islam, Mazhar Ul; Ullah, Muhammad Wajid; Khan, Shaukat; Shah, Nasrullah; Park, Joong Kon

    2017-09-01

    Bacterial cellulose (BC) has received substantial attention because of its high purity, mechanical strength, crystallinity, liquid-absorbing capabilities, biocompatibility, and biodegradability etc. These properties allow BC to be used in various fields, especially in industries producing medical, electronic, and food products etc. A major discrepancy associated with BC is its high production cost, usually much higher than the plant cellulose. To address this limitations, researchers have developed several strategies for enhanced production of BC including the designing of advanced reactors and utilization of various carbon sources. Another promising approach is the production of BC from waste materials such as food, industrial, agricultural, and brewery wastes etc. which not only reduces the overall BC production cost but is also environment-friendly. Besides, exploration of novel and efficient BC producing microbial strains provides impressive boost to the BC production processes. To this end, development of genetically engineered microbial strains has proven useful for enhanced BC production. In this review, we have summarized major efforts to enhance BC production in order to make it a cost-effective biopolymer. This review can be of interest to researchers investigating strategies for enhanced BC production, as well as companies exploring pilot projects to scale up BC production for industrial applications. Copyright © 2017 Elsevier B.V. All rights reserved.

  7. Considerations Concerning the Application of Target Costing Method in the Industry of Dairy Products

    Directory of Open Access Journals (Sweden)

    Mortură Laura Alexandra

    2017-01-01

    Full Text Available In the present conditions of the market economy, which is in full process of globalization, theadaptation of the more complex and diverse needs of the final consumers, leads to a permanentcreation and development of new products and services by the entities in order to satisfy theseneeds. Thus, the entities must apply efficient and tested methods for determining and provisioningthe costs which will result from launching new products on the market, methods which wouldsupport and ensure the best quality – price report, and which are to reduce the production costs upto a level of not affecting the quality of the final product. Such a method, according to specialtyliterature is the modern method of Target Costing.

  8. The costs of the different pathways of electricity production and saving

    International Nuclear Information System (INIS)

    Dessus, B.

    2012-01-01

    The author discusses the content and methodology of a report published by the French Court of Audit on the assessment of the costs of the nuclear sector. He briefly recalls the principle adopted by the Court, i.e. the method of the economic current cost which calculates a global MWh cost on the whole operation duration of the selected production tool. The author discusses the application of this method to different electricity production and consumption sectors: ground-based wind energy, the Flamanville EPR, use of low-energy bulbs, air-air heat pumps, a refrigerator. He compares and discusses the results obtained for different electricity production sectors (EPR, ground-based wind energy, and gas combined cycle technology) and their sensitivity to adopted hypotheses. He comments the evolution of the investment cost of nuclear reactors in France, the economic current costs of offshore wind energy and small photovoltaic production. He finally discusses the economic current costs of the different ways of energy saving and their sensitivity to the adopted hypotheses

  9. [Costs with personnel and productivity analysis of family health program teams in Fortaleza, Ceará].

    Science.gov (United States)

    Rocha Filho, Fernando dos Santos; da Silva, Marcelo Gurgel Carlos

    2009-01-01

    The research verified the productivity and the operational personnel costs of eight teams of the Family Health Program (PSF) of two Basic Units of Family Health (UBASF) in Fortaleza, Ceará, through the methodology of costs by absorption, in 2004. The largest expenses were with personnel (75%), mainly with the PSF teams, and medicines (18%). The federal allocations received in September, 2004, by each PSF team, were R$ 9,543.33. The total cost by team was R$ 15,719.00. Some professionals of various PSF teams showed productivity above the set objectives, but the average productivity by doctor and nurse was below fifty per cent of objectives, with high idle time making the work onerous. The unity cost of home visits by doctor and prenatal attendance by nurses were checked, and, would be less expensive if the idle time were reduced. Various alternatives of cost reduction were observed, such as scale savings of some resources and services and re-negotiation of contracts with suppliers and cooperatives. The data obtained will contribute to more accurate planning for the installation and maintenance of PSF teams as well as alternatives of cost reductions, higher productivity, and better quality.

  10. Product costing and activity-based costing/management in Bacalhôa Vinhos de Portugal

    OpenAIRE

    Pacheco, Carlota

    2016-01-01

    The present Work Project introduces a case study addressing the adoption of an ABC/M system in a winemaking company. The system was implemented in only one area of the company, and its adoption allows the company to perform ABM analysis resorting to the ABC information. A mixed approach is used to cost the products: both traditional and ABC systems are used although in different areas of the company. ABC/M implementation was perceived as ‘successful’ despite not following recommendations pres...

  11. OPTIMIZATION OF TIMES AND COSTS OF PROJECT OF HORIZONTAL LAMINATOR PRODUCTION USING PERT/CPM TECHNICAL

    Directory of Open Access Journals (Sweden)

    Fernando Henrique Lermen

    2016-09-01

    Full Text Available The PERT/CPM is a technique widely used in both the scheduling and in the project feasibility in terms of cost control and time.  In order to optimize time and costs involved in production, the work presented here aims to apply the PERT/CPM technique in the production project of the Horizontal Laminator, a machine used to cut polyurethane foam blocks in the mattresses industries. For the application of PERT/CPM technique in the project of Horizontal Laminator production were identified the activities that compose the project, the dependence between them, the normal and accelerated durations and the normal and accelerated costs. In this study, deterministic estimates for the duration of the activities were considered. The results show that the project can be completed in 520 hours at a total cost of R$7,042.50, when all activities are performed in their normal durations.  When all the activities that compose the critical path are accelerated, the project can be completed in 333.3 hours at a total cost of R$9,263.01. If the activities slacks have been exploited, it can obtain a final total cost of R$6,157.8, without changing the new duration of the project. It is noteworthy that the final total cost of the project if the slacks are used, will be lower than the initial cost. Regarding the initial cost of the project, after the application of the PERT/CPM technique, it presents a decrease of 12.56% of the total project cost.

  12. Productivity costs decrease after endoscopic sinus surgery for refractory chronic rhinosinusitis.

    Science.gov (United States)

    Rudmik, Luke; Smith, Timothy L; Mace, Jess C; Schlosser, Rodney J; Hwang, Peter H; Soler, Zachary M

    2016-03-01

    The primary objective of this pilot study was to define the change in productivity costs following endoscopic sinus surgery (ESS) for chronic rhinosinusitis (CRS). Secondary objectives were to identify CRS-related characteristics that may influence the degree of productivity improvement after ESS. Prospective, multi-institutional, observational cohort study. The human capital approach was used to define productivity costs. Annual absenteeism, presenteeism, and lost leisure time were quantified to define annual lost productive time (LPT). LPT was monetized using the annual daily wage rates obtained from the 2012 US Census and the 2013 US Department of Labor statistics. Twenty-seven patients with refractory CRS who underwent ESS were followed for a mean of 15 months (range, 8-25 months). Following ESS, there were improvements in annual absenteeism (22 days reduced to 3 days), annual presenteeism (41 days reduced to 19 days), and annual household days lost (12 days reduced to 6 days). Overall, the preoperative productivity costs were reduced after ESS ($9,190 vs. $3,373, respectively; P productivity is negatively impacted by the presence of CRS. The outcomes from this study provide the first insights into the reduced productivity costs associated with receiving ESS for refractory CRS. Future studies with larger sample sizes will need to validate the results from this pilot study. 2c Laryngoscope, 126:570-574, 2016. © 2015 The American Laryngological, Rhinological and Otological Society, Inc.

  13. Productivity loss due to overweight and obesity: a systematic review of indirect costs.

    Science.gov (United States)

    Goettler, Andrea; Grosse, Anna; Sonntag, Diana

    2017-10-05

    The increasingly high levels of overweight and obesity among the workforce are accompanied by a hidden cost burden due to losses in productivity. This study reviews the extent of indirect cost of overweight and obesity. A systematic search was conducted in eight electronic databases (PubMed, Cochrane Library, Web of Science Core Collection, PsychInfo, Cinahl, EconLit and ClinicalTrial.gov). Additional studies were added from reference lists of original studies and reviews. Studies were eligible if they were published between January 2000 and June 2017 and included monetary estimates of indirect costs of overweight and obesity. The authors reviewed studies independently and assessed their quality. Of the 3626 search results, 50 studies met the inclusion criteria. A narrative synthesis of the reviewed studies revealed substantial costs due to lost productivity among workers with obesity. Especially absenteeism and presenteeism contribute to high indirect costs. However, the methodologies and results vary greatly, especially regarding the cost of overweight, which was even associated with lower indirect costs than normal weight in three studies. The evidence predominantly confirms substantial short-term and long-term indirect costs of overweight and obesity in the absence of effective customised prevention programmes and thus demonstrates the extent of the burden of obesity beyond the healthcare sector. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  14. Examining the association of smoking with work productivity and associated costs in Japan.

    Science.gov (United States)

    Suwa, Kiyomi; Flores, Natalia M; Yoshikawa, Reiko; Goto, Rei; Vietri, Jeffrey; Igarashi, Ataru

    2017-09-01

    Smoking is associated with significant health and economic burden globally, including an increased risk of many leading causes of mortality and significant impairments in work productivity. This burden is attenuated by successful tobacco cessation, including reduced risk of disease and improved productivity. The current study aimed to show the benefits of smoking cessation for workplace productivity and decreased costs associated with loss of work impairment. The data source was the 2011 Japan National Health and Wellness Survey (n = 30,000). Respondents aged 20-64 were used in the analyses (n = 23,738) and were categorized into: current smokers, former smokers, and never smokers. Generalized linear models controlling for demographics and health characteristics examined the relationship of smoking status with the Work Productivity and Activity Impairment questionnaire (WPAI-GH) endpoints, as well as estimated indirect costs. Current smokers reported the greatest overall work impairment, including absenteeism (i.e. work time missed) and presenteeism (i.e. impairment while at work); however, after controlling for covariates, there were no significant differences between former smokers and never smokers on overall work impairment. Current smokers and former smokers had greater activity impairment (i.e. impairment in daily activities) than never smokers. Current smokers reported the highest indirect costs (i.e. costs associated with work impairment); however, after controlling for covariates, there were no significant differences between former smokers and never smokers on indirect costs. Smoking exerts a large health and economic burden; however, smoking cessation attenuates this burden. The current study provides important further evidence of this association, with former smokers appearing statistically indistinguishable from never smokers in terms of work productivity loss and associated indirect costs among a large representative sample of Japanese workers

  15. Impacts of supplyshed-level differences in productivity and land Costs on the economics of hybrid poplar production in Minnesota, USA

    Science.gov (United States)

    William Lazarus; William L. Headlee; Ronald S. Zalesny

    2015-01-01

    The joint effects of poplar biomass productivity and land costs on poplar production economics were compared for 12 Minnesota counties and two genetic groups, using a process-based model (3-PG) to estimate productivity. The counties represent three levels of productivity and a range of land costs (annual rental rates) from $128/ha to $534/ha. An optimal rotation age...

  16. Multi objective optimization model for minimizing production cost and environmental impact in CNC turning process

    Science.gov (United States)

    Widhiarso, Wahyu; Rosyidi, Cucuk Nur

    2018-02-01

    Minimizing production cost in a manufacturing company will increase the profit of the company. The cutting parameters will affect total processing time which then will affect the production cost of machining process. Besides affecting the production cost and processing time, the cutting parameters will also affect the environment. An optimization model is needed to determine the optimum cutting parameters. In this paper, we develop an optimization model to minimize the production cost and the environmental impact in CNC turning process. The model is used a multi objective optimization. Cutting speed and feed rate are served as the decision variables. Constraints considered are cutting speed, feed rate, cutting force, output power, and surface roughness. The environmental impact is converted from the environmental burden by using eco-indicator 99. Numerical example is given to show the implementation of the model and solved using OptQuest of Oracle Crystal Ball software. The results of optimization indicate that the model can be used to optimize the cutting parameters to minimize the production cost and the environmental impact.

  17. Evaluation of syngas production unit cost of bio-gasification facility using regression analysis techniques

    Energy Technology Data Exchange (ETDEWEB)

    Deng, Yangyang; Parajuli, Prem B.

    2011-08-10

    Evaluation of economic feasibility of a bio-gasification facility needs understanding of its unit cost under different production capacities. The objective of this study was to evaluate the unit cost of syngas production at capacities from 60 through 1800Nm 3/h using an economic model with three regression analysis techniques (simple regression, reciprocal regression, and log-log regression). The preliminary result of this study showed that reciprocal regression analysis technique had the best fit curve between per unit cost and production capacity, with sum of error squares (SES) lower than 0.001 and coefficient of determination of (R 2) 0.996. The regression analysis techniques determined the minimum unit cost of syngas production for micro-scale bio-gasification facilities of $0.052/Nm 3, under the capacity of 2,880 Nm 3/h. The results of this study suggest that to reduce cost, facilities should run at a high production capacity. In addition, the contribution of this technique could be the new categorical criterion to evaluate micro-scale bio-gasification facility from the perspective of economic analysis.

  18. Productivity cost due to postpartum ill health: A cross-sectional study in Sri Lanka.

    Science.gov (United States)

    Wickramasinghe, Nuwan Darshana; Horton, Jennifer; Darshika, Ishani; Galgamuwa, Kaushila Dinithi; Ranasinghe, Wasantha Pradeep; Agampodi, Thilini Chanchala; Agampodi, Suneth Buddhika

    2017-01-01

    Even though postpartum morbidity continues to cause high disease burden in maternal morbidity and mortality across the globe, the literature pertaining to resultant productivity loss is scarce. Hence, the present study aimed at determining the productivity loss and associated cost of episodes of postpartum ill health. A cross sectional study was conducted in two Medical Officer of Heath areas in the Anuradhapura district, Sri Lanka in 2011, among 407 women residing in Anuradhapura district with an infant aged between 8 to 24 weeks. Validated interviewer administered questionnaires, including the IMMPACT productivity cost tool, were used to collect data on self-reported episodes of postpartum ill health. The productivity loss was calculated as the sum of days lost due to partial and total incapacitation. The adjusted productivity loss for coping strategies was calculated. Productivity cost, both total and adjusted, were calculated based on the mean daily per capita income of the study sample. Of the 407 participants, 161(39.6%) reported at least one episode of postpartum illness. Hospitalisations were reported by 27 (16.8%) of all symptomatic postpartum women. Common symptoms of postpartum ill health were pain/infection at either episiotomy or surgical site (n = 44, 27.3%), lower abdominal pain (n = 40, 24.8%) and backache (n = 27, 16.8%). The mean productivity loss per episode of ill health was 15 days (SD = 7.8 days) and the mean productivity loss per episode after adjusting for coping strategies was 7.9 days (SD = 4.4 days). The mean productivity cost per an episode was US$ 34.2(95%CI US$ 26.7-41.6) and the mean productivity cost per an episode after adjusting for coping strategies was US$ 18.0 (95%CI US$ 14.1-22.0). The prevalence of self-reported postpartum ill health, associated productivity loss and cost were high in the study sample and the main contributors were preventable conditions including pain and infection. Thus, effective pain management and proper

  19. Knocking on Industry’s Door: Needs in Product-Cost Optimization in the Early Product Life Cycle Stages

    Directory of Open Access Journals (Sweden)

    Matthias Walter

    2017-12-01

    Full Text Available While theoretical concepts for product-costing methodologies have evolved over the decades, little emphasis has been placed on their integration into modern information systems. During a co-innovation workshop at SAP SE, we initiated our collaborative research with selected large-scale enterprises from the discrete manufacturing industry. Moreover, we conducted interviews with business experts to gain a sophisticated understanding of the cost-optimization process itself. As a result, we present an exemplary optimization process with an emphasis on the specific characteristics of the product development stage. Based upon this example, we identified associated deficits in information system support. No current software fulfills the enterprises’ requirements regarding cost optimization in the early stages of a product’s life cycle. Thus, the respective processes lack integration in corporate environments. Taking this on, our article compiles detailed problem identification and, moreover, suggests approaches to overcome these hurdles.

  20. Cost-effective IMTA: a comparison of the production efficiencies of mussels and seaweed

    DEFF Research Database (Denmark)

    Holdt, Susan Løvstad; Edwards, Maeve D.

    2014-01-01

    seaweed with regard to the amount of nitrogen assimilated. Furthermore, in optimized systems, areal requirement for mussels is similar to the cultivation of the same tonnage (1,000 t) of seaweed (approximately 8 ha). The cost-effectiveness of a mussel biofilter is €11–30 kg−1 nitrogen (N) removed based...... on various examples compared to production costs of €209–672 removed and €1,013 kg−1 N removed, respectively, for Laminaria digitata and Alaria esculenta from extrapolated laboratory and field trials. However, commercial seaweed (Saccharina latissima) producers claim that production costs are less than €10......–38 kg−1 N removed. These up-scaled and commercial figures make the seaweed cost competitive to mussels for removal of nitrogen. Disadvantages such as predators (e.g. eider ducks) and biofouling should also be taken into account before choice of biofilter is made. These drawbacks can reduce overall...

  1. Analyzing Integrated Cost-Schedule Risk for Complex Product Systems R&D Projects

    Directory of Open Access Journals (Sweden)

    Zhe Xu

    2014-01-01

    Full Text Available The vast majority of the research efforts in project risk management tend to assess cost risk and schedule risk independently. However, project cost and time are related in reality and the relationship between them should be analyzed directly. We propose an integrated cost and schedule risk assessment model for complex product systems R&D projects. Graphical evaluation review technique (GERT, Monte Carlo simulation, and probability distribution theory are utilized to establish the model. In addition, statistical analysis and regression analysis techniques are employed to analyze simulation outputs. Finally, a complex product systems R&D project as an example is modeled by the proposed approach and the simulation outputs are analyzed to illustrate the effectiveness of the risk assessment model. It seems that integrating cost and schedule risk assessment can provide more reliable risk estimation results.

  2. Logistics cost analysis of rice residues for second generation bioenergy production in Ghana

    DEFF Research Database (Denmark)

    Vijay Ramamurthi, Pooja; Cristina Fernandes, Maria; Nielsen, Per Sieverts

    2014-01-01

    This study explores the techno-economic potential of rice residues as a bioenergy resource to meet Ghana’s energy demands. Major rice growing regions of Ghana have 70–90% of residues available for bioenergy production. To ensure cost-effective biomass logistics, a thorough cost analysis was made...... for two bioenergy routes. Logistics costs for a 5MWe straw combustion plant were 39.01, 47.52 and 47.89USD/t for Northern, Ashanti and Volta regions respectively. Logistics cost for a 0.25MWe husk gasification plant (with roundtrip distance 10km) was 2.64USD/t in all regions. Capital cost (66......–72%) contributes significantly to total logistics costs of straw, however for husk logistics, staff (40%) and operation and maintenance costs (46%) dominate. Baling is the major processing logistic cost for straw, contributing to 46–48% of total costs. Scale of straw unit does not have a large impact on logistic...

  3. [Cost of lost productivity in pharmacoeconomics analysis. Part II. Survey in the expert group].

    Science.gov (United States)

    Wrona, Witold; Hermanowski, Tomasz; Jakubczyk, Michał; Golicki, Dominik; Czech, Marcin; Niewada, Maciej; Kolasa, Katarzyna

    2011-01-01

    The aim of the survey was to collect data on practice and preferences of decision-makers and experts in health economics concerning the role of indirect costs in Poland. The questionnaire contained 18 questions covering the need for indirect costs calculation in economic evaluations and measures used to calculate indirect cost. Fifty four respondents related to health economics returned completed questionnaires. Mean age of respondents was 33,3 years; mean experience in health economics 4.7 years; 43% (23/54) of responders had non-economic background; 30% each were users and doers of health technology assessment reports. All (excluding one) responders indicated that indirect costs should be calculated in pharmacoeconomic studies. Twenty three (i.e., 43%) responders indicated human capital approach as the best method to estimate costs from societal perspective; friction cost method came second best 11%; 42% respondents had no opinion. The doers of economics evaluations pointed to GDP per capita (61%, 11/18), average salary (61%, 11/18), and costs of sick pay or injury benefit (61%, 11/18) as measures which could be used to value production losses. Indirect costs are considered important component of economic evaluations of healthcare interventions in Poland. The lack of widely accepted methods for indirect cost evaluation support further research.

  4. Cost Minimization for Joint Energy Management and Production Scheduling Using Particle Swarm Optimization

    Science.gov (United States)

    Shah, Rahul H.

    Production costs account for the largest share of the overall cost of manufacturing facilities. With the U.S. industrial sector becoming more and more competitive, manufacturers are looking for more cost and resource efficient working practices. Operations management and production planning have shown their capability to dramatically reduce manufacturing costs and increase system robustness. When implementing operations related decision making and planning, two fields that have shown to be most effective are maintenance and energy. Unfortunately, the current research that integrates both is limited. Additionally, these studies fail to consider parameter domains and optimization on joint energy and maintenance driven production planning. Accordingly, production planning methodology that considers maintenance and energy is investigated. Two models are presented to achieve well-rounded operating strategy. The first is a joint energy and maintenance production scheduling model. The second is a cost per part model considering maintenance, energy, and production. The proposed methodology will involve a Time-of-Use electricity demand response program, buffer and holding capacity, station reliability, production rate, station rated power, and more. In practice, the scheduling problem can be used to determine a joint energy, maintenance, and production schedule. Meanwhile, the cost per part model can be used to: (1) test the sensitivity of the obtained optimal production schedule and its corresponding savings by varying key production system parameters; and (2) to determine optimal system parameter combinations when using the joint energy, maintenance, and production planning model. Additionally, a factor analysis on the system parameters is conducted and the corresponding performance of the production schedule under variable parameter conditions, is evaluated. Also, parameter optimization guidelines that incorporate maintenance and energy parameter decision making in the

  5. Evaluation of the electric power production cost growth due to decommissioning of nuclear power plants

    International Nuclear Information System (INIS)

    Basso, G.

    1982-01-01

    The increase of production cost for electric power generated by nuclear plants, due to their decommissioning and the end of operating life, is analysed in respect to (a) waiting time from indefinite shut-down date to the start of dismantlement, (b) financing method, (c) interest and inflation rates. The analysis shows that the additional cost is always small for those solutions which have higher probability to be adopted

  6. UMTRA Project-Level Cost Reduction/Productivity Improvement Program manual

    International Nuclear Information System (INIS)

    1995-06-01

    Mission of the Uranium Mill Tailings Remedial Action (UMTRA) Project Cost Reduction/Productivity Improvement Program (CR/PIP) is to contribute to the UMTRA Project's environmental restoration mission by providing the means to achieve and recognize continuous improvements and cost savings. This manual includes program definition, description of UMTRA project organizational responsibilities and interfaces with existing project functions, guidance to contractors, and definition of project-level functions

  7. Using wood products to mitigate climate change: External costs and structural change

    Energy Technology Data Exchange (ETDEWEB)

    Sathre, Roger; Gustavsson, Leif [Ecotechnology, Mid Sweden University, 831 25 Oestersund (Sweden)

    2009-02-15

    In this study we examine the use of wood products as a means to mitigate climate change. We describe the life cycle of wood products including forest growth, wood harvest and processing, and product use and disposal, focusing on the multiple roles of wood as both material and fuel. We present a comparative case study of a building constructed with either a wood or a reinforced concrete frame. We find that the production of wood building material uses less energy and emits less carbon than the production of reinforced concrete material. We compare the relative cost of the two building methods without environmental taxation, under the current Swedish industrial energy taxation regime, and in scenarios that incorporate estimates of the full social cost of carbon emission. We find that the inclusion of climate-related external costs improves the economic standing of wood construction vis-a-vis concrete construction. We conclude that policy instruments that internalise the external costs of carbon emission should encourage a structural change toward the increased use of sustainably produced wood products. (author)

  8. Productivity Costs Decrease After Endoscopic Sinus Surgery for Refractory Chronic Rhinosinusitis

    Science.gov (United States)

    Rudmik, Luke; Smith, Timothy L.; Mace, Jess C.; Schlosser, Rodney J.; Hwang, Peter H.; Soler, Zachary M.

    2015-01-01

    Objective The primary objective of this pilot study was to define the change in productivity costs following endoscopic sinus surgery (ESS) for chronic rhinosinusitis (CRS). Secondary objectives were to identify CRS-related characteristics that may influence the degree of productivity improvement after ESS. Study Design Prospective, multi-institutional, observational cohort study. Methods The human capital approach was used to define productivity costs. Annual absenteeism, presenteeism, and lost leisure time was quantified to define annual lost productive time (LPT). LPT was monetized using the annual daily wage rates obtained from the 2012 US National Census and the 2013 US Department of Labor statistics. Results 27 patients with refractory CRS who underwent ESS were followed for a mean of 15 [SD 4.0] months (range: 8 – 25 months). Following ESS, there were improvements in annual absenteeism (22 days reduced to 3 days), annual presenteeism (41 days reduced to 19 days), and annual household days lost (12 days reduced to 6 days). Overall, the preoperative productivity costs were reduced after ESS, $9,097 vs. $3,301, respectively (pproductivity is negatively impacted by the presence of CRS. The outcomes from this study provide the first insights into the reduced productivity costs associated with receiving ESS for refractory CRS. Future studies with larger sample sizes will need to validate the results from this pilot study. PMID:26371457

  9. Integrated batch production and maintenance scheduling for multiple items processed on a deteriorating machine to minimize total production and maintenance costs with due date constraint

    Directory of Open Access Journals (Sweden)

    Zahedi Zahedi

    2016-04-01

    Full Text Available This paper discusses an integrated model of batch production and maintenance scheduling on a deteriorating machine producing multiple items to be delivered at a common due date. The model describes the trade-off between total inventory cost and maintenance cost as the increase of production run length. The production run length is a time bucket between two consecutive preventive maintenance activities. The objective function of the model is to minimize total cost consisting of in process and completed part inventory costs, setup cost, preventive and corrective maintenance costs and rework cost. The problem is to determine the optimal production run length and to schedule the batches obtained from determining the production run length in order to minimize total cost.

  10. Costs in the function of business decision making for mushroom production

    Directory of Open Access Journals (Sweden)

    Ljubica Ranogajec

    2018-03-01

    Full Text Available Mushroom growing, as a branch of agriculture has been rapidly developing in recent years. Emphasis is particularly put on the application of technology that can accelerate the production process to increase yield and to minimize human labor invested in production. Mushroom production was analyzed on a farm with a monthly production of 15,000 kg or an annual production of 180,000 kg. The calculations were based on the defined difference between the costs of manual labor and machine service invested in the mushroom growing room. The break-even point or the coverage point was set at 83,414 kg, referring to the production level with the same manual and machine work costs. Machine refilling for mushroom production above the mentioned amount is more profitable, while manual refilling is economically efficient within the production below the determined amount. On the analyzed farm, applied machine work led to the lowering of costs for 167,778.00 HRK per year. Purchase of machinery requires a total investment of 1,207,500 HRK with the return of 7.2 years.

  11. Productivity Losses Associated with Head and Neck Cancer Using the Human Capital and Friction Cost Approaches.

    Science.gov (United States)

    Pearce, Alison M; Hanly, Paul; Timmons, Aileen; Walsh, Paul M; O'Neill, Ciaran; O'Sullivan, Eleanor; Gooberman-Hill, Rachael; Thomas, Audrey Alforque; Gallagher, Pamela; Sharp, Linda

    2015-08-01

    Previous studies suggest that productivity losses associated with head and neck cancer (HNC) are higher than in other cancers. These studies have only assessed a single aspect of productivity loss, such as temporary absenteeism or premature mortality, and have only used the Human Capital Approach (HCA). The Friction Cost Approach (FCA) is increasingly recommended, although has not previously been used to assess lost production from HNC. The aim of this study was to estimate the lost productivity associated with HNC due to different types of absenteeism and premature mortality, using both the HCA and FCA. Survey data on employment status were collected from 251 HNC survivors in Ireland and combined with population-level survival estimates and national wage data. The cost of temporary and permanent time off work, reduced working hours and premature mortality using both the HCA and FCA were calculated. Estimated total productivity losses per employed person of working age were EUR253,800 using HCA and EUR6800 using FCA. The main driver of HCA costs was premature mortality (38% of total) while for FCA it was temporary time off (73% of total). The productivity losses associated with head and neck cancer are substantial, and return to work assistance could form an important part of rehabilitation. Use of both the HCA and FCA approaches allowed different drivers of productivity losses to be identified, due to the different assumptions of the two methods. For future estimates of productivity losses, the use of both approaches may be pragmatic.

  12. Multi-Scale Ordered Cell Structure for Cost Effective Production of Hydrogen by HTWS

    Energy Technology Data Exchange (ETDEWEB)

    Elangovan, Elango [Ceramatec, Inc., West Valley City, UT (United States); Rao, Ranjeet [PARC, Palo Alto, CA (United States); Colella, Whitney [Gaia Energy Research Inst. LLC, Arlington, VA (United States)

    2017-12-20

    Production of hydrogen using an electrochemical device provides for large scale, high efficiency conversion and storage of electrical energy. When renewable electricity is used for conversion of steam to hydrogen, a low-cost and low emissions pathway to hydrogen production emerges. This project was intended to demonstrate a high efficiency High Temperature Water Splitting (HTWS) stack for the electrochemical production of low cost H2. The innovations investigated address the limitations of the state of the art through the use of a novel architecture that introduces macro-features to provide mechanical support of a thin electrolyte, and micro-features of the electrodes to lower polarization losses. The approach also utilizes a combination of unique sets of fabrication options that are scalable to achieve manufacturing cost objectives. The development of HTWS process and device is guided by techno-economic and life cycle analyses.

  13. The burden of mortality with costs in productivity loss from occupational cancer in Italy.

    Science.gov (United States)

    Binazzi, Alessandra; Scarselli, Alberto; Marinaccio, Alessandro

    2013-11-01

    The costs of productivity loss due to occupational cancer mortality are rarely investigated. An estimate of occupational cancer deaths in Italy in 2006 and an approximation of the resultant costs from medical and non-medical expenditures together with figures of remuneration lost are provided. Occupational cancer deaths, obtained from the application of the attributable fraction (AF) to mortality data (source: Italian National Institute of Statistics), were used to calculate the Potential Years of Life Lost (PYLLs), the Potential Years of Working Life Lost (PYWLLs) and the costs of the loss of productive life. The health care costs for any cancer was applied to the estimated number of occupational cancer cases to obtain the total cost. Around 8,000-8,500 deaths/year from occupational cancer are estimated to occur in Italy, corresponding to 170,000 PYLLs and more than 16,000 PYWLLs, leading to around 360,000,000 euros in indirect economic loss. Health care costs of occupational cancer are estimated at 456,000,000 euros. Occupational cancer is of major concern in terms of mortality and economic productivity loss. Preventive efforts in evaluating ongoing risks and current exposures are strongly recommended to health policy-makers. Copyright © 2013 Wiley Periodicals, Inc.

  14. Impacts of facility size and location decisions on ethanol production cost

    International Nuclear Information System (INIS)

    Kocoloski, Matt; Michael Griffin, W.; Scott Matthews, H.

    2011-01-01

    Cellulosic ethanol has been identified as a promising alternative to fossil fuels to provide energy for the transportation sector. One of the obstacles cellulosic ethanol must overcome in order to contribute to transportation energy demand is the infrastructure required to produce and distribute the fuel. Given a nascent cellulosic ethanol industry, locating cellulosic ethanol refineries and creating the accompanying infrastructure is essentially a greenfield problem that may benefit greatly from quantitative analysis. This study models cellulosic ethanol infrastructure investment using a mixed integer program (MIP) that locates ethanol refineries and connects these refineries to the biomass supplies and ethanol demands in a way that minimizes the total cost. For the single- and multi-state regions examined in this study, larger facilities can decrease ethanol costs by $0.20-0.30 per gallon, and placing these facilities in locations that minimize feedstock and product transportation costs can decrease ethanol costs by up to $0.25 per gallon compared to uninformed placement that could result from influences such as local subsidies to encourage economic development. To best benefit society, policies should allow for incentives that encourage these low-cost production scenarios and avoid politically motivated siting of plants. - Research highlights: → Mixed-integer programming can be used to model ethanol infrastructure investment. → Large cellulosic ethanol facilities can decrease production cost by $0.20/gallon. → Optimized facility placement can save $0.25/gallon.

  15. Proposal to realize a cost breakthrough in carbon-13 production by photochemical separation

    International Nuclear Information System (INIS)

    Marling, J.B.

    1979-10-01

    A cost breakthrough can now be made in photochemical production of the rare stable isotope carbon-13. This cost breakthrough is achieved by CO 2 laser infrared multiple-photon dissociation of any of several halocarbons (Freon derivatives) such as CF 3 Cl, CF 3 Br, or CF 2 Cl 2 . The single-step carbon-13 enrichment factor for this process is approximately 50, yielding 30% pure C-13 in one step, or up to 97% pure C-13 in two steps. A three-fold carbon-13 cost reduction to below $20/gram is expected to be achieved in a small laboratory-scale demonstration facility capable of producing 4 to 8 kg/year of carbon-13, using presently available pulsed CO 2 TEA lasers at an average power level of 50 watts. Personnel costs dominate the attainable C-13 production costs in a small photochemical enrichment facility. A price reduction to $2/gm carbon-13 is feasible at carbon-13 production levels of 100 to 1000 kg/year, dominated by the Freon raw material costs

  16. Transportation cost of nuclear off-peak power for hydrogen production based on water electrolysis

    International Nuclear Information System (INIS)

    Shimizu, Saburo; Ueno, Shuichi

    2004-01-01

    The paper describes transportation cost of the nuclear off-peak power for a hydrogen production based on water electrolysis in Japan. The power could be obtainable by substituting hydropower and/or fossil fueled power supplying peak and middle demands with nuclear power. The transportation cost of the off-peak power was evaluated to be 1.42 yen/kWh when an electrolyser receives the off-peak power from a 6kV distribution wire. Marked reduction of the cost was caused by the increase of the capacity factor. (author)

  17. Production costs: U.S. gas turbine ampersand combined-cycle power plants

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This fourth edition of UDI's gas turbine O ampersand M cost report gives 1991 operation and maintenance expenses for over 450 US gas turbine power plants. Modeled on UDI's popular series of O ampersand M cost reports for US steam-electric plants, this report shows operator and plant name, plant year-in-service, installed capacity, 1991 net generation, total fuel expenses, total non-fuel O ampersand M expenses, total production costs, and current plant capitalization. Coverage includes over 90 percent of the utility-owned gas/combustion turbine and combined-cycle plants installed in the country

  18. AN INVESTIGATION OF THE APPLICABILITY OF SOFTWARE PRODUCT LINE ENGINEERING FOR ENERGY AND COST-EFFICIENT GREENHOUSE PRODUCTION

    DEFF Research Database (Denmark)

    Mærsk-Møller, Hans Martin

    product line architecture, and how the variability is managed and described using SPLE. It also describes how the DynaLight software product line and its products were developed. Doing so, it shows utilization of rich client platform technology in conjunction with SPLE, which has not been described....... Supplementary lighting is utilized to compensate for the light conditions in the darker months of the year in order to grow certain plants. This is both energy consuming and expensive, as the cost of electricity is high. New knowledge on the plasticity in plants to irregular light patterns is basis for a novel...... and cost, and two desktop tools, the first, DynaLight Desktop, a day-ahead-light-planning tool, and the second, DynaLight Desktop w/control, with the added capability to execute the plans by actuating the light inside the greenhouses. This work provides a SPLE methodology explicitly customized to our...

  19. Analysis on the cost structure of product recall for reverse supply chain

    Science.gov (United States)

    Yanhua, Feng; Xuhui, Xia; Zheng, Yang

    2017-12-01

    The research on the reverse supply chain of product recall mainly focused on the recall network structure, logistics mode and so on. In this paper, when product recall and supply channel are fixed, the specific structure and function expression of cost are analyzed according to the peak season and off-season of recall activities, and whether the assembly manufacturer, supplier and recyclers are cooperated situation, respectively, to build the total cost structure of the function model. Finally, the model is validated correctly through the automotive industry and the electromechanical industry.

  20. A simple and low-cost recirculating aquaculture system for the production of arapaima juveniles

    OpenAIRE

    Burton, Andrew Mark; Moncayo Calderero, Edwin; Burgos Moran, Ricardo Ernesto; Anastacio Sánchez, Rogelio Lumbes; Avendaño Villamar, Ulises Tiberio; Ortega Torres, Nelson Guillermo

    2016-01-01

    A simple and low-cost recirculating system (RAS) for production of arapaima  (Arapaima gigas) juveniles is described. Twenty arapaima fry (mean 13.0 cm, 12.0 g) were housed in three production tanks and fed a high HUFA diet resulting in 90% of fry successfully progressing to juveniles (mean 17.4 cm long; 40.2 g). The fish were then reared for a further 72 days fed on commercial extruded pellet feed achieving a mean length of 42.6 cm and 656.6 g. The simple and low-cost RAS holds good potentia...

  1. EFFECT OF CSR ON PRODUCT DIFFERENTIATION IN THE PRESENCE OF COST ADVANTAGE

    Directory of Open Access Journals (Sweden)

    Samar K. Mukhopadhyay

    2017-03-01

    Full Text Available Corporate social responsibility (CSR, once thought of only a philanthropic activity of a firm, is now treated as a serious business strategy that can contribute to a firm’s profitability. The seemingly altruistic activity helps build the firm’s image with all the stakeholders including its customers so that it has the potential to increase the firm’s profit. This fact is now well established in research literature. Product differentiation is another corporate strategy that is pursued by some companies in order to offer a distinctive product in the market to avoid competition, charge premium price, and increase profit. What is not known is that when two firms compete in a Hotelling type product differentiation line, how much this product differentiation is affected by the extent of the CSR activity of a firm. Our study is conducted in a game-theoretic setting where the CSR firm is competing with a non-CSR firm. The CSR firm maximizes a convex combination of its own profit and a form of social utility function, while the non-CSR firm maximizes its own profit only. The CSR firm is also assumed to have a technological advantage that reduces its production cost. The interaction of the effects of both the extent of CSR and the extent of this production cost advantage is also considered. We also study a scenario of asymmetric information. Our main results include that the degree of product differentiation is reduced when CSR is practiced. On the other hand, product differentiation increases with the production cost advantage. The interaction between the two factors – CSR activity and cost advantage – is also studied.

  2. The effect of CO2 regulations on the cost of corn ethanol production

    Science.gov (United States)

    Plevin, R. J.; Mueller, S.

    2008-04-01

    To explore the effect of CO2 price on the effective cost of ethanol production we have developed a model that integrates financial and emissions accounting for dry-mill corn ethanol plants. Three policy options are modeled: (1) a charge per unit of life cycle CO2 emissions, (2) a charge per unit of direct biorefinery emissions only, and (3) a low carbon fuel standard (LCFS). A CO2 charge on life cycle emissions increases production costs by between 0.005 and 0.008 l-1 per 10 Mg-1 CO2 price increment, across all modeled plant energy systems, with increases under direct emissions somewhat lower in all cases. In contrast, a LCFS increases the cost of production for selected plant energy systems only: a LCFS requiring reductions in average fuel global warming intensity (GWI) with a target of 10% below the 2005 baseline increases the production costs for coal-fired plants only. For all other plant types, the LCFS operates as a subsidy. The findings depend strongly on the magnitude of a land use change adder. Some land use change adders currently discussed in the literature will push the GWI of all modeled production systems above the LCFS target, flipping the CO2 price from a subsidy to a tax.

  3. Production cost of biomasses from eucalyptus and elefant grass for energy

    Directory of Open Access Journals (Sweden)

    Laurent Marie Roger Quéno

    2011-09-01

    Full Text Available This work established the unit energy cost generated from biomass of eucalyptus (Eucalyptus sp. and elephant grass (Pennisetum sp. and applied a sensitivity analysis to verify the influences of factors such as the silviculture of eucalyptus, production volume of each species, the cost of land and the interest rate. It was shown that the treatment of eucalyptus in very short rotation of 2 years with reform of stand every 6 years has a average cost of production higher than the traditional treatment of short rotation of 6 years with reform only at the age of 18. It was also observed that eucalyptus has a Production Cost on average of R$ 4,41 /Gj, lower than the elephant grass which is on average of R$ 5,44/Gj, which however has a higher annual capacity of dry matter production. The elephant grass has the possibility to compete with eucalyptus when a set of conditions is met: discount rate higher than or equal to 8%, High price of land, and elephant grass high volume production, greater than or equal to 35 tonnes of dry matter per hectare and year.

  4. Resource-recovery facilities: Production and cost functions, and debt-financing issues

    International Nuclear Information System (INIS)

    Simonsen, W.S.

    1991-01-01

    Some of the fiscal questions relating to resource-recovery, or trash-burning, facilities are addressed. Production and cost functions for resource-recovery facilities are estimated using regression analysis. Whether or not there are returns to scale are addressed using the production and cost-function framework. Production functions are also estimated using data envelopment analysis (DEA), and results are compared to the regression results. DEA is a linear-program-based technique that can provide information about the production process. The data used to estimate the production and cost functions were collected from the Resource Recovery Yearbook. Once the decision is made to construct a resource-recovery facility, it needs to be financed. The high cost of these facilities usually prohibits financing construction out of regular operating revenues. Therefore, the issues a government faces when debt is used to finance a resource-recovery facility are analyzed. The most important public policy finding is that increasing economies of scale do not seem to be present for resource-recovery facilities

  5. [Hospital production cost of repetitive transcranial magnetic stimulation (rTMS) in the treatment of depression].

    Science.gov (United States)

    Etcheverrigaray, F; Bulteau, S; Machon, L O; Riche, V P; Mauduit, N; Tricot, R; Sellal, O; Sauvaget, A

    2015-08-01

    Repetitive transcranial magnetic stimulation (rTMS) is an effective and well-tolerated treatment in resistant depression with mild to moderate intensity. This indication has not yet been approved in France. The cost and medico-economic value of rTMS in psychiatry remains unknown. The aim of this preliminary study was to assess rTMS cost production analysis as an in-hospital treatment for depression. The methodology, derived from analytical accounts, was validated by a multidisciplinary task force (clinicians, public health doctors, pharmacists, administrative officials and health economist). It was pragmatic, based on official and institutional documentary sources and from field practice. It included equipment, staff, and structure costs, to get an estimate as close to reality as possible. First, we estimated the production cost of rTMS session, based on our annual activity. We then estimated the cost of a cure, which includes 15 sessions. A sensitivity analysis was also performed. The hospital production cost of a cure for treating depression was estimated at € 1932.94 (€ 503.55 for equipment, € 1082.75 for the staff, and € 346.65 for structural expenses). This cost-estimate has resulted from an innovative, pragmatic, and cooperative approach. It is slightly higher but more comprehensive than the costs estimated by the few international studies. However, it is limited due to structure-specific problems and activity. This work could be repeated in other circumstances in order to obtain a more general estimate, potentially helpful for determining an official price for the French health care system. Moreover, budgetary constraints and public health choices should be taken into consideration. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  6. PLAN 98 - Costs for management of the radioactive waste from nuclear power production

    International Nuclear Information System (INIS)

    1998-06-01

    The nuclear utilities in Sweden are responsible for managing and disposing of spent nuclear fuel and radioactive waste from the nuclear power reactors in a safe manner. The most important measures are to plan, build and operate the facilities and systems needed, and to conduct related R and D. This report presents a calculation of the costs for implementing all of these measures. The following facilities and systems are in operation: Transportation system for radioactive waste products. Central interim storage facility for spent nuclear fuel, CLAB. Final repository for radioactive operational waste, SFR I. Plans also exist for: Encapsulation plant for spent nuclear fuel. Deep repository for spent fuel and other long-lived waste. Final repository for decommissioning waste. The cost calculations also include costs for research, development and demonstration, as well as for decommissioning and dismantling the reactor plants etc. At the end of 1995, certain amendments were made in the Financing Act which influence the calculations presented in this report. The most important amendment is that the reactor owners, besides paying a fee or charge on nuclear energy production, must also give guarantees as security for remaining costs. In this way the fee can be based on a probable cost for waste management. This cost includes uncertainties and variations that are normal for this type of project. Cost increases as a consequence of major changes, disruptions etc. can instead be covered via the given guarantees. The total future costs, in January 1998 prices, for the Swedish waste management system from 1999 onward has been calculated to be SEK 45.8 billion. The total costs apply for the waste obtained from 25 years of operation of all Swedish reactors. They will fall due over a total period of approximately 50 years up to the middle of the 2l st century, but the greater part will fall due during the next 20 years. It is estimated that SEK 12.1 billion in current money terms

  7. Indirect costs and workplace productivity loss associated with non-Hodgkin lymphoma.

    Science.gov (United States)

    Yu, Justin S; Hansen, Ryan N; Valderrama, Adriana; Carlson, Josh J

    2016-11-01

    The objective of this study was to examine indirect costs and workplace productivity loss (defined as an aggregate measure of absenteeism, short-term disability, and long-term disability days) associated with non-Hodgkin lymphoma (NHL) from a societal perspective in a commercially insured working-age United States population. The MarketScan(®) Commercial Claims and Encounters and Health and Productivity Management Databases (2007-2013) were used in this study, with controls matched 3:1 to NHL patients. In comparison to controls, NHL patients incurred significantly more workplace productivity loss (31.99 days; 95% CI: 25.24 days, 38.73 days; p workplace productivity and higher associated indirect costs.

  8. Guide to resource conservation and cost savings opportunities in the soap, detergents and related products sector

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The soaps, detergents and related products sector is an important component of the chemical industry within Ontario, as these products are used for cleaning purposes in industrial, institutional and domestic consumer applications. This guide was prepared to assist the sector with cost savings and resource conservation. The guide highlights opportunities for resource conservation through energy and water efficiency improvements, more efficient utilisation of raw materials, and reduction of environmental releases at source. 54 figs.

  9. Energy cost of negative pion production on deuterium-tritium target

    Energy Technology Data Exchange (ETDEWEB)

    Kuzminov, V.V. (Petersburg Nuclear Physics Inst., Gatchina, St. Petersburg (Russian Federation)); Petrov, Yu.V. (Petersburg Nuclear Physics Inst., Gatchina, St. Petersburg (Russian Federation)); Shabelski, Yu.M. (Petersburg Nuclear Physics Inst., Gatchina, St. Petersburg (Russian Federation))

    1993-12-01

    The negative pion production by deuterons (T[sub 0] = 0.8 GeV/nucl.) was calculated for a cylindrical gaseous deuterium-tritium target (the density of DT-mixture is [phi] = 0.5). Revised cross sections of nucleon-nucleus interaction were used in a Monte Carlo simulation and multiple nucleon-nuclei collisions were taken into account. The energy cost of negative pion production is [epsilon][sub [pi][sup -

  10. An estimate of the cost of electricity production from hot-dry rock

    International Nuclear Information System (INIS)

    Pierce, K.G.; Livesay, B.J.

    1993-01-01

    This paper gives an estimate of the cost to produce electricity from hot-dry rock (HDR). Employment of the energy in HDR for the production of electricity requires drilling multiple wells from the surface to the hot rock, connecting the wells through hydraulic fracturing, and then circulating water through the fracture system to extract heat from the rock. The basic HDR system modeled in this paper consists of an injection well, two production wells, the fracture system (or HDR reservoir), and a binary power plant. Water is pumped into the reservoir through the injection well where it is heated and then recovered through the production wells. Upon recovery, the hot water is pumped through a heat exchanger transferring heat to the binary, or working, fluid in the power plant. The power plant is a net 5.1-MW e binary plant employing dry cooling. Make-up water is supplied by a local well. In this paper, the cost of producing electricity with the basic system is estimated as the sum of the costs of the individual parts. The effects on cost of variations to certain assumptions, as well as the sensitivity of costs to different aspects of the basic system, are also investigated

  11. A Methodology for Production and Cost Assessment of a Farm of Wave Energy Converters

    DEFF Research Database (Denmark)

    Beels, C.; Troch, P.; Kofoed, Jens Peter

    2011-01-01

    to the sea through hydro turbines. It is observed that the cable cost is relatively small compared to the cost of the WD–WECs. As a result, WD–WECs should be installed in a lay-out to increase power production rather than decrease cable cost, taking spatial and safety considerations into account. WD......To generate a substantial amount of power, Wave Energy Converters (WECs) are arranged in several rows or in a ‘farm’. Both the power production and cost of a farm are lay-out dependent. In this paper, the wave power redistribution in and around three farm lay-outs in a near shore North Sea wave...... climate, is assessed numerically using a time-dependent mild-slope equation model. The modelling of the wave power redistribution is an efficient tool to assess the power production of a farm. Further, for each lay-out an optimal (low cost) submarine cable network is designed. The methodology to assess...

  12. Cost calculation model concerning small-scale production of chips and split firewood

    International Nuclear Information System (INIS)

    Ryynaenen, S.; Naett, H.; Valkonen, J.

    1995-01-01

    The TTS-Institute's Forestry Department has developed a computer-based cost calculation model for the production of wood chips and split firewood. This development work was carried out in conjunction with the nation-wide BIOENERGY -research programme. The said calculation model eases and speeds up the calculation of unit costs and resource needs in harvesting systems for wood chips and split firewood. The model also enables the user to find out how changes in the productivity and costs bases of different harvesting chains influences the unit costs of the system as a whole. The undertaking was composed of the following parts: clarification and modification of productivity bases for application in the model as mathematical models, clarification of machine and device costs bases, designing of the structure and functions of the calculation model, construction and testing of the model's 0-version, model calculations concerning typical chains, review of calculation bases, and charting of development needs focusing on the model. The calculation model was developed to serve research needs, but with further development it could be useful as a tool in forestry and agricultural extension work, related schools and colleges, and in the hands of firewood producers. (author)

  13. COMPUTER SYSTEM FOR DETERMINATION OF COST DAILY SUGAR PRODUCTION AND INCIDENTS DECISIONS FOR COMPANIES SUGAR (SACODI

    Directory of Open Access Journals (Sweden)

    Alejandro Álvarez-Navarro

    2016-01-01

    Full Text Available The process of sugar production is complex; anything that affects this chain has direct repercussions in the sugar production’s costs, it’s synthetic and decisive indicator for the taking of decisions. Currently the Cuban sugar factory determine this cost weekly, for that, its process of taking of decisions is affected. Looking for solutions to this problem, the present work, being part of a territorial project approved by CITMA, intended to calculate the cost of production daily, weekly, monthly and accumulated until indicated date, according to an adaptation to the methodology used by the National Costs System of sugarcane created by the MINAZ, it’s supported by a computer system denominated SACODI. This adaptation registers the physical and economic indicators of all direct and indirect expenses of the  sugarcane and besides this information generates an economic-mathematical model of goal programming whose solution indicates the best balance in amount of sugar of the entities of the sugar factory, in short term. The implementation of the system in the sugar factory «Julio A. Mella» in Santiago de Cuba in the sugar-cane production 08-09 produced an estimate of decrease of the cost of until 3,5 % for the taking of better decisions. 

  14. Internalising external costs of electricity and heat production in a municipal energy system

    International Nuclear Information System (INIS)

    Holmgren, Kristina; Amiri, Shahnaz

    2007-01-01

    Both energy supply and waste treatment give rise to negative effects on the environment, so-called external effects. In this study, monetary values on external costs collected from the EU's ExternE project are used to evaluate inclusion of these costs in comparison with an energy utility perspective including present policy instruments. The studied object is a municipal district heating system with a waste incineration plant as the base supplier of heat. The evaluation concerns fuels used for heat production and total electricity production, for scenarios with external costs included and for a scenario using the present policy instrument. Impacts of assumptions on marginal power producers (coal or natural gas power plants) are investigated, since locally produced electricity is assumed to replace marginal power and thus is credited for the avoided burden. Varying levels of external costs for carbon dioxide emissions are analysed. The method used is an economic optimisation model, MODEST. The conclusion is that present policy instruments are strong incentives for cogeneration, even when external costs are included. Waste is fully utilised in all scenarios. In cases where coal is the marginal power producer, more electricity is produced; when natural gas is the marginal power producer, less is produced. There are several uncertainties in the data for external costs, both methodological and ethical. In the ExternE data, not all environmental impacts are included. For waste incineration, ashes are not included, and another difficulty is how to treat the avoided burden of other waste treatment methods

  15. Cost Evaluation with G4-ECONS Program for SI based Nuclear Hydrogen Production Plant

    International Nuclear Information System (INIS)

    Kim, Jong-ho; Lee, Ki-young; Kim, Yong-wan

    2014-01-01

    Contemporary hydrogen is production is primarily based on fossil fuels, which is not considered as environments friendly and economically efficient. To achieve the hydrogen economy, it is very important to produce a massive amount of hydrogen in a clean, safe and efficient way. Nuclear production of hydrogen would allow massive production of hydrogen at economic prices while avoiding environments pollution reducing the release of carbon dioxide. Nuclear production of hydrogen could thus become the enabling technology for the hydrogen economy. The economic assessment was performed for nuclear hydrogen production plant consisting of VHTR coupled with SI cycle. For the study, G4-ECONS developed by EMWG of GIF was appropriately modified to calculate the LUHC, assuming 36 months of plant construction time, 5 % of annual interest rate and 12.6 % of fixed charge rate. In G4-ECONS program, LUHC is calculated by the following formula; LUHC = (Annualized TCIC + Annualized O-M Cost + Annualized Fuel Cycle Cost + Annualized D-D Cost) / Annual Hydrogen Production Rate

  16. DATA MINING METHODOLOGY FOR DETERMINING THE OPTIMAL MODEL OF COST PREDICTION IN SHIP INTERIM PRODUCT ASSEMBLY

    Directory of Open Access Journals (Sweden)

    Damir Kolich

    2016-03-01

    Full Text Available In order to accurately predict costs of the thousands of interim products that are assembled in shipyards, it is necessary to use skilled engineers to develop detailed Gantt charts for each interim product separately which takes many hours. It is helpful to develop a prediction tool to estimate the cost of interim products accurately and quickly without the need for skilled engineers. This will drive down shipyard costs and improve competitiveness. Data mining is used extensively for developing prediction models in other industries. Since ships consist of thousands of interim products, it is logical to develop a data mining methodology for a shipyard or any other manufacturing industry where interim products are produced. The methodology involves analysis of existing interim products and data collection. Pre-processing and principal component analysis is done to make the data “user-friendly” for later prediction processing and the development of both accurate and robust models. The support vector machine is demonstrated as the better model when there are a lower number of tuples. However as the number of tuples is increased to over 10000, then the artificial neural network model is recommended.

  17. The iMTA Productivity Cost Questionnaire: A Standardized Instrument for Measuring and Valuing Health-Related Productivity Losses.

    Science.gov (United States)

    Bouwmans, Clazien; Krol, Marieke; Severens, Hans; Koopmanschap, Marc; Brouwer, Werner; Hakkaart-van Roijen, Leona

    2015-09-01

    Productivity losses often contribute significantly to the total costs in economic evaluations adopting a societal perspective. Currently, no consensus exists on the measurement and valuation of productivity losses. We aimed to develop a standardized instrument for measuring and valuing productivity losses. A group of researchers with extensive experience in measuring and valuing productivity losses designed an instrument suitable for self-completion, building on preknowledge and evidence on validity. The instrument was designed to cover all domains of productivity losses, thus allowing quantification and valuation of all productivity losses. A feasibility study was performed to check the questionnaire's consistency and intelligibility. The iMTA Productivity Cost Questionnaire (iPCQ) includes three modules measuring productivity losses of paid work due to 1) absenteeism and 2) presenteeism and productivity losses related to 3) unpaid work. Questions for measuring absenteeism and presenteeism were derived from existing validated questionnaires. Because validated measures of losses of unpaid work are scarce, the questions of this module were newly developed. To enhance the instrument's feasibility, simple language was used. The feasibility study included 195 respondents (response rate 80%) older than 18 years. Seven percent (n = 13) identified problems while filling in the iPCQ, including problems with the questionnaire's instructions and routing (n = 6) and wording (n = 2). Five respondents experienced difficulties in estimating the time that would be needed for other people to make up for lost unpaid work. Most modules of the iPCQ are based on validated questions derived from previously available instruments. The instrument is understandable for most of the general public. Copyright © 2015 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

  18. Probabilistic Analysis of Electrical Energy Costs: Comparing Production Costs for Gas, Coal and Nuclear Power Plants. Annex III

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-12-15

    The increase in electricity demand is linked to the development of the economy and living standards in each country. This is especially true in those developing countries in which electricity consumption is far below the average of industrialized countries. To satisfy the increased demand for electricity, it is necessary to build new electrical power plants that could, in an optimum way, meet the imposed acceptability criteria. The main criteria are the potential to supply the required energy and to supply it with minimum or, at least, acceptable costs and environmental impacts, to satisfy the licensing requirements and be acceptable to the public. The main competitors for electricity production in the next few decades are fossil fuel power plants (coal and gas) and nuclear power plants. Power plants making use of renewables (solar, wind, biomass) are also important, but due to limited energy supply potential and high costs, can only be a supplement to the main generating units. Large hydropower plants would be competitive under the condition that suitable sites for the construction of such plants exist. Unfortunately, both in Croatia and in the rest of central Europe, such sites are scarce.

  19. Concepts of increasing productivity and reducing the processing cost of machine parts

    Directory of Open Access Journals (Sweden)

    О. С. Кленов

    2017-06-01

    Full Text Available The basic conditions to reduce the cost of processing technology and improve productivity through the use of modern cutting tools produced by leading foreign firms producing tools have been appraised from theory in the work. Theoretically, it has been found that an increase in the cost of processing varies according to extremum dependence, passing the minimum point. It is possible to reduce the minimum processing cost due to the increase of productivity using cutting edge tools, characterized by a high capacity for work in high cutting temperatures. The criterion showing the technological price cost minimum is the ratio of the expenditures on workers’ wages to the expenditures on the cutting tools, it being quite specific for various processing conditions. To analyze the possibilities of practical use of the proposed criterion, a complex of experimental researches of the technological prime cost and productivity of the processing with hard alloy cutting tools with wear-resistant coatings produced by the company «Iscar» has been carried out. It has been established that their use makes it possible by more than one half to reduce the labour consumption and overall costs as compared to the hard alloy cutting tools traditionally used in home industry. It has been shown that this effect is achieved by increasing the cutting speed and feed due to increased wear resistance and heat resistance of the «Iscar» company tools. It was established that it is much more possible to achieve low processing cost at milling than at turning. It was stated with regard to all major expenditures including the workers' wages, the cost of the cutting tools, equipment and other costs, allowing more correctly estimate the cost-effectiveness of mechanical processing. Experiments confirmed that the main condition for reducing the processing cost to its minimum value is to increase the processing performance through the use of a heat-resistant and wear-resistant cutting

  20. Cost estimate for the production of ethanol from spent sulphite liquors and wood residues

    International Nuclear Information System (INIS)

    Nguyen, Q.

    1990-03-01

    A Lotus 1-2-3 spreadsheet model for estimating the production cost of 95 wt % ethanol from spent sulfite liquors (SSL) and from a wood hydrolysis front-end is described. The most economically attractive process is the fermentation of softwood SSL (SSSL) by the yeast Saccharomyces cerevisiae, yielding a production cost estimate of $0.47/liter. The cost of producing ethanol from cellulosic waste (clarifier sludge) via acid hydrolysis is approximately $0.55/liter, still below the market price of ca $0.60/liter for industrial ethanol. Neither the fermentation of hardwood SSL nor the conversion of sawdust to ethanol, using current technology, are economically viable. However, these processes can become commercially viable if acetic acid-tolerant xylose-fermenting yeasts can be found. 17 refs., 12 figs., 16 tabs

  1. Membrane reforming in converting natural gas to hydrogen: Production costs, Part II

    Energy Technology Data Exchange (ETDEWEB)

    Iaquaniello, G; Cosenza, S [Technip-KTI S.p.A., via Castello della Magliana 75, Rome (Italy); Giacobbe, F; Morico, B; Farace, A [Processi Innovativi s.r.l., L' Aquila (Italy)

    2008-11-15

    This paper evaluates the production costs of a hybrid system based on a new membrane reforming MRR concept to convert natural gas to hydrogen and electricity. Membrane reforming with hydrogen-selective, palladium-silver membranes pushes the chemical equilibrium and allows higher methane conversions at lower temperature such as 650 C. The new MRR concept formed of a series of modules is put forward herein. Each module is made up of a reforming step and an external membrane separation unit. The estimates, based on utilities costs of a typical Italian refinery (end of 2006), show that the production costs for the hybrid system are 30% less than conventional tubular steam reforming technology, and 13% less than a gas-fired cogeneration plant coupled with a conventional H{sub 2} plant. (author)

  2. An Analysis of Benefit and Cost of Local Chicken Production By the ...

    African Journals Online (AJOL)

    Newcastle disease (ND) has high seroprevalence rate and inflicts heavy economic losses on poultry as often the case in rural poultry production. This study examined the socialeconomic characteristics of the respondents and the benefit/ cost analysis of rural chicken farmers in two local council areas of Kogi State of igeria ...

  3. analysis of cost efficiency in food crop production among small-scale

    African Journals Online (AJOL)

    PROF. BARTH EKWEME

    Food crop production in Nigeria is dominated by small-scale farmers ... influenced by farm-specific factors, which delineate their ..... vii). Cost of seed: This is the total expenses on seed incurred by the farmer during the last cropping season. It.

  4. An Alternative Method for Computing Unit Costs and Productivity Ratios. AIR 1984 Annual Forum Paper.

    Science.gov (United States)

    Winstead, Wayland H.; And Others

    An alternative measure for evaluating the performance of academic departments was studied. A comparison was made with the traditional manner for computing unit costs and productivity ratios: prorating the salary and effort of each faculty member to each course level based on the personal mix of course taught. The alternative method used averaging…

  5. Balancing development costs and sales to optimize the development time of product line additions

    NARCIS (Netherlands)

    Langerak, F.; Griffin, A.; Hultink, E.J.

    2010-01-01

    Development teams often use mental models to simplify development time decision making because a comprehensive empirical assessment of the trade-offs across the metrics of development time, development costs, proficiency in market-entry timing, and new product sales is simply not feasible.

  6. Methods for cost management during product development: A review and comparison of different literatures

    NARCIS (Netherlands)

    Wouters, M.; Morales, S.; Grollmuss, S.; Scheer, M.

    2016-01-01

    Purpose The paper provides an overview of research published in the innovation and operations management (IOM) literature on 15 methods for cost management in new product development, and it provides a comparison to an earlier review of the management accounting (MA) literature (Wouters & Morales,

  7. Analysis of mechanical thinning productivity and cost for use at the wildland urban interface

    Science.gov (United States)

    Bruno S. Folegatti; Mathew F. Smidt; Edward F. Loewenstein; Emily Carter; Timothy P. McDonald

    2007-01-01

    Forest management in many parts of the urbanizing Southeastern U.S. is becoming more difficult due to fragmentation, alternative management objectives, and social conflicts with management activities. However, the public benefits from management of these are still high. This study compared the productivity and costs of mechanical thinning treatments using conventional...

  8. U3O8 production cost analysis study. Sandstone deposit mine model EA-730, Volume 1

    International Nuclear Information System (INIS)

    1978-08-01

    Objective was the development and testing of a model for estimating the production cost of conventional uranium mining. The model used evolved from a base case underground mine of 1000 tons per day output at a nominal depth of 900 feet, and from base-case open pit mines of 2000 tons per day output at 30-, 120-, and 240-foot depths. In addition, an alternate production method employing heap leaching was partially investigated, to be merged with similar work performed by another contractor. The model was internally structured into component submodels capable of reflecting the contributory factors which aggregate into the computed production cost. A financial submodel based on last-quarter 1976 prices used conventional accounting practices to generate a cash flow and profit-and-loss record over the mine life. From this a selling price was obtained based on a desired discounted cash flow return on equity. This submodel is also capable of accepting input inflation rates so that costs in current dollars for future years can be estimated. A Monte Carlo method of the analysis of variance was applied to 50 model runs to obtain a statistical estimate for the expected variance in production cost

  9. An expert system for estimating production rates and costs for hardwood group-selection harvests

    Science.gov (United States)

    Chris B. LeDoux; B. Gopalakrishnan; R. S. Pabba

    2003-01-01

    As forest managers shift their focus from stands to entire ecosystems alternative harvesting methods such as group selection are being used increasingly. Results of several field time and motion studies and simulation runs were incorporated into an expert system for estimating production rates and costs associated with harvests of group-selection units of various size...

  10. Harvest operations for density management: planning requirements, production, costs, stand damage, and recommendations

    Science.gov (United States)

    Loren D. Kellogg; Stephen J. Pilkerton

    2013-01-01

    Since the early 1990s, several studies have been undertaken to determine the planning requirements, productivity, costs, and residual stand damage of harvest operations in thinning treatments designed to promote development of complex forest structure in order to enhance ecological functioning and biological diversity. Th ese studies include the Oregon State...

  11. 21 CFR 1005.24 - Costs of bringing product into compliance.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Costs of bringing product into compliance. 1005.24 Section 1005.24 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... include: (a) Travel expenses of the supervising officer; (b) Per diem in lieu of subsistence of the...

  12. Productivity Losses and Costs in the Less-Common Systemic Autoimmune Rheumatic Diseases.

    Science.gov (United States)

    McCormick, Natalie; Marra, Carlo A; Aviña-Zubieta, J Antonio

    2017-10-30

    We synthesised the literature on productivity losses and costs in the less-common systemic autoimmune rheumatic diseases: Sjogren's syndrome (SjS), systemic sclerosis (SSc), poly/dermatomyositis (PM/DM), and systemic vasculitides (SV). Of 29 studies located, 12 were published 2012 onwards (SSc = 6, SjS = 2, PM/DM = 2, SV = 2). In these, 25% of PM/DM, and 21-26% of SV, were work disabled, 22% of SSc stopped work within 3 years of diagnosis, and annual costs of absenteeism in SSc averaged $12,024 2017 USD. Very few studies reported on costs, presenteeism (working at reduced levels), or unpaid productivity loss. Across multiple systemic autoimmune rheumatic diseases (SARDs), major drivers of lost productivity were generalised items like pain, depression, and fatigue, rather than disease-specific factors. Evidence suggests that work disability is common in SSc and strikes quickly. However, in SSc and other SARDs, more comprehensive estimates are needed, which include absenteeism and presenteeism from paid and unpaid work, costs, and drivers of productivity loss.

  13. Production and cost of a live skyline cable yarder tested in Appalachia

    Science.gov (United States)

    Edward L. Fisher; Harry G. Gibson; Cleveland J. Biller

    1980-01-01

    Logging systems that are profitable and environmentally acceptable are needed in Appalachian hardwood forests. Small, mobile cable yarders show promise in meeting both economic and environmental objectives. One such yarder, the Ecologger, was tested on the Jefferson National Forest near Marion, Virginia. Production rates and costs are presented for the system along...

  14. Measuring and managing the environmental cost of coffee production in Latin America

    Science.gov (United States)

    Victor Chavez Arce; Raul Raudales; Rich Trubey; David I. King; Richard B. Chandler; Carlin C. Chandler

    2009-01-01

    Coffee is a major international commodity, and because of this, coffee production has the potential for considerable global impacts on the environment. These impacts can include the consumption of energy, water, land and the loss of native forest. Here we quantify these costs using Costa Rica as a case study, and describe an initiative undertaken at the Montes de Oro...

  15. Productivity and cost analysis of a mobile pyrolysis system deployed to convert mill residues into biochar

    Science.gov (United States)

    Woodam Chung; Dongyeob Kim; Nathaniel Anderson

    2012-01-01

    Forest and mill residues are a promising source of biomass feedstock for the production of bioenergy, biofuels and bioproducts. However, high costs of transportation and handling of feedstock often make utilization of forest residues, such as logging slash, financially unviable. As a result, these materials are often considered waste and left on site to decompose or...

  16. Cost analysis of enzymatic biodiesel production in small-scaled packed-bed reactors

    NARCIS (Netherlands)

    Budzaki, S.; Miljic, G.; Sundaram, S.; Tisma, M.; Hessel, V.

    2017-01-01

    A cost analysis of enzymatic biodiesel production in small-scaled packed-bed reactors using refined sunflower oil is performed in this work. A few enzymatic micro-flow reactors have so far reached a performance close to gram-scale, which might be sufficient for the pharmaceutical industry. This

  17. Costs and return analysis in rubber latex production in Edo State ...

    African Journals Online (AJOL)

    The study examined the costs and return analysis in rubber latex production in Edo Sate, Nigeria. Multi-stage sampling method was adopted to select 96 smallholder rubber framers for the study. The first stage was a purposive sampling of two LGAs and then simple random sampling of 6 villages each from the two LGA.

  18. Productivity and cost of whole-tree harvesting without debarking in a ...

    African Journals Online (AJOL)

    The study examined the impact of retaining bark on logs on the productivity and costs of a whole-tree to roadside harvesting system in a short-rotation Eucalyptus nitens plantation in Australia being harvested for pulp logs. Trees were felled and bunched with a feller-buncher in spring, then left infield for four weeks to ...

  19. Trends in real costs of crude oil production: The Middle East vs its competitors

    International Nuclear Information System (INIS)

    Stauffer, T.R.

    1993-01-01

    The costs of oil production in the major areas of the world, including both OPEC and non-OPEC countries are discussed. The success of Saudi Arabia's policy of squeezing out non-OPEC oil by unilaterally cutting prices is assessed by examining the variation in costs of production within OPEC, between OPEC and non-OPEC producers, whether there are producing areas which are cost-constrained, whether non-OPEC development has been curbed, and whether lack of capital might constrain future production, especially in OPEC states. It is concluded that low prices have been only partially successful, because in most areas the full-cycle cost of new oil production is still less than the current oil price, even allowing for a 15% rate of return. Low prices have limited new oil development only in the North Sea, the U.S. and Canada, while Oman and Malaysia continue to expand. The pace of drilling has been affected by low prices, and net increases in non-OPEC output has been forestalled. 4 figs

  20. Multi-Product Total Cost of Function for Higher Education: A Case of Bible Colleges.

    Science.gov (United States)

    Koshal, Rajindar K.; Koshal, Manjulika; Gupta, Ashok

    2001-01-01

    This study empirically estimates a multiproduct total cost function and output relationship for comprehensive U.S. universities. Statistical results for 184 Bible colleges suggest that there are both economies of scale and of scope in higher education. Additionally, product-specific economies of scope exist for all output levels and activities.…

  1. The costs of egg production and incubation in great tits (Parus major)

    NARCIS (Netherlands)

    Visser, M.E.; Lessells, C.M.

    2001-01-01

    The costs of egg production and incubation may have a crucial effect on avian reproductive decisions, such as clutch size and the timing of reproduction. We carried out a brood-size enlargement experiment on the great tit (Parus major), in which the birds had to lay and incubate extra eggs (full

  2. Wood pellet production costs under Austrian and in comparison to Swedish framework conditions

    NARCIS (Netherlands)

    Obernberger, I.; Thek, G.

    2004-01-01

    Owing to the rapidly increasing importance of pellets as high-quality biomass fuel in Austria and Europe within the last years, many companies, mainly from the wood industry, are thinking of entering this market. The calculation of the production costs before starting a pellet plant is essential for

  3. Effects of internalising external production costs in a North European power market

    International Nuclear Information System (INIS)

    Munksgaard, J.; Ramskov, J.

    2002-01-01

    The aim of integrating national power markets is to improve the overall efficiency thereby making a potential for reducing electricity prices. However, efficiency is not necessarily improved if external environmental protection costs are neglected. In this paper, we analyse the effects of regulating an integrated power market by using environmental producer taxes based on external production costs. The analysis is based on an empirical equilibrium model for the North European power market. The results show that internalising costs will increase electricity producer prices by 40-50% in the period from 1995 to 2020. Further, demand for electricity will be reduced by 10%. We conclude, however, that in order to achieve the national Kyoto targets of reducing CO 2 emissions, further regulation is needed, such as national CO 2 taxes or cost efficient mechanisms like tradeable permits and joint implementation. (author)

  4. Development of a low-cost cellulase production process using Trichoderma reesei for Brazilian biorefineries.

    Science.gov (United States)

    Ellilä, Simo; Fonseca, Lucas; Uchima, Cristiane; Cota, Junio; Goldman, Gustavo Henrique; Saloheimo, Markku; Sacon, Vera; Siika-Aho, Matti

    2017-01-01

    During the past few years, the first industrial-scale cellulosic ethanol plants have been inaugurated. Although the performance of the commercial cellulase enzymes used in this process has greatly improved over the past decade, cellulases still represent a very significant operational cost. Depending on the region, transport of cellulases from a central production facility to a biorefinery may significantly add to enzyme cost. The aim of the present study was to develop a simple, cost-efficient cellulase production process that could be employed locally at a Brazilian sugarcane biorefinery. Our work focused on two main topics: growth medium formulation and strain improvement. We evaluated several Brazilian low-cost industrial residues for their potential in cellulase production. Among the solid residues evaluated, soybean hulls were found to display clearly the most desirable characteristics. We engineered a Trichoderma reesei strain to secrete cellulase in the presence of repressing sugars, enabling the use of sugarcane molasses as an additional carbon source. In addition, we added a heterologous β-glucosidase to improve the performance of the produced enzymes in hydrolysis. Finally, the addition of an invertase gene from Aspegillus niger into our strain allowed it to consume sucrose from sugarcane molasses directly. Preliminary cost analysis showed that the overall process can provide for very low-cost enzyme with good hydrolysis performance on industrially pre-treated sugarcane straw. In this study, we showed that with relatively few genetic modifications and the right growth medium it is possible to produce considerable amounts of well-performing cellulase at very low cost in Brazil using T. reesei . With further enhancements and optimization, such a system could provide a viable alternative to delivered commercial cellulases.

  5. COST ESTIMATES OF TWIN SCREW EXTRUDED PRODUCTS: TEXTURIZED WHEY PROTEIN SNACKS AND CORN-SOY BLEND USED FOR EMERGENCY FEEDING

    Science.gov (United States)

    The operating costs associated with twin screw extrusion cooking of various foods are fixed for a given size and production capacity for any class of products; the greater percentage of costs arise from the choice of ingredients and the product end use. For example, extruder texturized whey proteins...

  6. Cost analysis of two-dimensional warranty for products with periodic preventive maintenance

    International Nuclear Information System (INIS)

    Huang, Yeu-Shiang; Gau, Wei-Yo; Ho, Jyh-Wen

    2015-01-01

    This study uses a bivariate approach, which simultaneously considers the time and usage of a repairable product, and takes into account periodic preventive maintenance to develop a two-dimensional warranty policy for the repairable product. The proposed model is based on the bivariate Weibull process to analyze the breakdown process of a repairable product simultaneously in terms of time and usage. A repairable product may be differently utilized by various customers. We consider two types of customers: (1) customers whose product warranty is terminated because the warranty time limit has reached first; (2) customers whose product warranty is terminated because the warranty usage limit has reached first, to perform cost analyses for determining an appropriate warranty policy. However, since it is often the case that the repairable product may be equally likely purchased by the two types of customers who are equivalently important to the product manufacturer; the optimal warranty policy would thus be the equilibrium solution of the cost analyses which pay the same attention to both types of customers in order to maximize the total profit of the manufacturer. - Highlights: • We use a bivariate method to model the breakdown process. • We consider a periodic PM schedule. • We obtain an optimal two-dimensional warranty policy considering various customers. • The optimal 2D warranty is an equilibrium which satisfies both seller and buyer

  7. Measuring the costs of biosecurity on poultry farms: a case study in broiler production in Finland

    Directory of Open Access Journals (Sweden)

    Siekkinen Kirsi-Maarit

    2012-02-01

    Full Text Available Abstract Background Farm-level biosecurity provides the foundation for biosecurity along the entire production chain. Many risk management practices are constantly in place, regardless of whether there is a disease outbreak or not. Nonetheless, the farm-level costs of preventive biosecurity have rarely been assessed. We examined the costs incurred by preventive biosecurity for Finnish poultry farms. Methods We used a semi-structured phone interview and obtained results from 17 broiler producers and from 5 hatching egg producers, corresponding to about 10% of all producers in Finland. Results Our results indicate that the average cost of biosecurity is some 3.55 eurocent per bird for broiler producers (0.10 eurocent per bird per rearing day and 75.7 eurocent per bird for hatching egg producers (0.27 eurocent per bird per rearing day. For a batch of 75,000 broilers, the total cost would be €2,700. The total costs per bird are dependent on the annual number of birds: the higher the number of birds, the lower the cost per bird. This impact is primarily due to decreasing labour costs rather than direct monetary costs. Larger farms seem to utilise less labour per bird for biosecurity actions. There are also differences relating to the processor with which the producer is associated, as well as to the gender of the producer, with female producers investing more in biosecurity. Bird density was found to be positively related to the labour costs of biosecurity. This suggests that when the bird density is higher, greater labour resources need to be invested in their health and welfare and hence disease prevention. The use of coccidiostats as a preventive measure to control coccidiosis was found to have the largest cost variance between the producers, contributing to the direct costs. Conclusions The redesign of cost-sharing in animal diseases is currently ongoing in the European Union. Before we can assert how the risk should be shared or resort to the

  8. Cost reduction in the production process using the ABC and Lean tools: Case Study in the refrigeration components industry

    Directory of Open Access Journals (Sweden)

    Levi da Silva Guimarães

    2015-03-01

    Full Text Available This paper focuses on production management with respect to operating costs that relate directly to the value of the product. For this study, three methods were used, ABC - Activity Based Costing, which provides accurate information about the knowledge of the real costs, VSM - Value Stream Mapping and Lean Manufacturing. The method adopted for this research was the case study. The study was conducted at a refrigeration components company in the Industrial Center of Manaus. The analyses and observations initially went through the process of mapping the value stream, measuring the current state of activities (cycle time, setup, etc.. After analysis it was possible to map the cost for each activity and finally calculate the cost of the product before and after the improvements resulting from the lean methodology. The results obtained in this study showed a 20% reduction in product costs resulting from operational improvements. The activity-based cost led to a discovery of the real costs of waste. The steps for this study include process mapping through the value stream, measuring the current state of activities (cycle time, setup, etc., establishing the cost driver for each activity, and finally calculating the cost of the product before and after the application of lean improvements. The paper was conducted through literature and descriptive review, and used a case study method. It describes the model that has been tested in a production line for a refrigeration components company from the Manaus Industrial Center, achieving a 20% reduction in product cost.

  9. Production of Low Cost Carbon-Fiber through Energy Optimization of Stabilization Process

    Directory of Open Access Journals (Sweden)

    Gelayol Golkarnarenji

    2018-03-01

    Full Text Available To produce high quality and low cost carbon fiber-based composites, the optimization of the production process of carbon fiber and its properties is one of the main keys. The stabilization process is the most important step in carbon fiber production that consumes a large amount of energy and its optimization can reduce the cost to a large extent. In this study, two intelligent optimization techniques, namely Support Vector Regression (SVR and Artificial Neural Network (ANN, were studied and compared, with a limited dataset obtained to predict physical property (density of oxidative stabilized PAN fiber (OPF in the second zone of a stabilization oven within a carbon fiber production line. The results were then used to optimize the energy consumption in the process. The case study can be beneficial to chemical industries involving carbon fiber manufacturing, for assessing and optimizing different stabilization process conditions at large.

  10. Global Approximations to Cost and Production Functions using Artificial Neural Networks

    Directory of Open Access Journals (Sweden)

    Efthymios G. Tsionas

    2009-06-01

    Full Text Available The estimation of cost and production functions in economics relies on standard specifications which are less than satisfactory in numerous situations. However, instead of fitting the data with a pre-specified model, Artificial Neural Networks (ANNs let the data itself serve as evidence to support the modelrs estimation of the underlying process. In this context, the proposed approach combines the strengths of economics, statistics and machine learning research and the paper proposes a global approximation to arbitrary cost and production functions, respectively, given by ANNs. Suggestions on implementation are proposed and empirical application relies on standard techniques. All relevant measures such as Returns to Scale (RTS and Total Factor Productivity (TFP may be computed routinely.

  11. Identifying efficient dairy heifer producers using production costs and data envelopment analysis.

    Science.gov (United States)

    Heinrichs, A J; Jones, C M; Gray, S M; Heinrichs, P A; Cornelisse, S A; Goodling, R C

    2013-01-01

    During November and December 2011, data were collected from 44 dairy operations in 13 Pennsylvania counties. Researchers visited each farm to collect information regarding management practices and feeding, and costs for labor, health, bedding, and reproduction for replacement heifers from birth until first calving. Costs per heifer were broken up into 4 time periods: birth until weaning, weaning until 6 mo of age, 6 mo of age until breeding age, and heifers from breeding to calving. Milk production records for each herd were obtained from Dairy Herd Improvement. The average number of milking cows on farms in this study was 197.8 ± 280.1, with a range from 38 to 1,708. Total cost averaged $1,808.23 ± $338.62 from birth until freshening. Raising calves from birth to weaning cost $217.49 ± 86.21; raising heifers from weaning age through 6 mo of age cost $247.38 ± 78.89; raising heifers from 6 mo of age until breeding cost $607.02 ± 192.28; and total cost for bred heifers was $736.33 ± 162.86. Feed costs were the largest component of the cost to raise heifers from birth to calving, accounting for nearly 73% of the total. Data envelopment analysis determined that 9 of the 44 farms had no inefficiencies in inputs or outputs. These farms best combined feed and labor investments, spending, on average, $1,137.40 and $140.62/heifer for feed and labor. These heifers calved at 23.7 mo of age and produced 88.42% of the milk produced by older cows. In contrast, the 35 inefficient farms spent $227 more on feed and $78 more on labor per heifer for animals that calved 1.6 mo later and produced only 82% of the milk made by their mature herdmates. Efficiency was attained by herds with the lowest input costs, but herds with higher input costs were also able to be efficient if age at calving was low and milk production was high for heifers compared with the rest of the herd. Copyright © 2013 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  12. A smart Monte Carlo procedure for production costing and uncertainty analysis

    International Nuclear Information System (INIS)

    Parker, C.; Stremel, J.

    1996-01-01

    Electric utilities using chronological production costing models to decide whether to buy or sell power over the next week or next few weeks need to determine potential profits or losses under a number of uncertainties. A large amount of money can be at stake--often $100,000 a day or more--and one party of the sale must always take on the risk. In the case of fixed price ($/MWh) contracts, the seller accepts the risk. In the case of cost plus contracts, the buyer must accept the risk. So, modeling uncertainty and understanding the risk accurately can improve the competitive edge of the user. This paper investigates an efficient procedure for representing risks and costs from capacity outages. Typically, production costing models use an algorithm based on some form of random number generator to select resources as available or on outage. These algorithms allow experiments to be repeated and gains and losses to be observed in a short time. The authors perform several experiments to examine the capability of three unit outage selection methods and measures their results. Specifically, a brute force Monte Carlo procedure, a Monte Carlo procedure with Latin Hypercube sampling, and a Smart Monte Carlo procedure with cost stratification and directed sampling are examined

  13. Production Costs of Alternative Transportation Fuels. Influence of Crude Oil Price and Technology Maturity

    Energy Technology Data Exchange (ETDEWEB)

    Cazzola, Pierpaolo; Morrison, Geoff; Kaneko, Hiroyuki; Cuenot, Francois; Ghandi, Abbas; Fulton, Lewis

    2013-07-01

    This study examines the production costs of a range of transport fuels and energy carriers under varying crude oil price assumptions and technology market maturation levels. An engineering ''bottom-up'' approach is used to estimate the effect of the input cost of oil and of various technological assumptions on the finished price of these fuels. In total, the production costs of 20 fuels are examined for crude oil prices between USD 60 and USD 150 per barrel. Some fuel pathways can be competitive with oil as their production, transport and storage technology matures, and as oil price increases. Rising oil prices will offer new opportunities to switch to alternative fuels for transport, to diversify the energy mix of the transport sector, and to reduce the exposure of the whole system to price volatility and potential distuption of supply. In a time of uncertainty about the leading vehicle technology to decarbonize the transport sector, looking at the fuel cost brings key information to be considered to keep mobility affordable yet sustainable.

  14. Cost Analysis of Direct Methanol Fuel Cell Stacks for Mass Production

    Directory of Open Access Journals (Sweden)

    Mauro Francesco Sgroi

    2016-11-01

    Full Text Available Fuel cells are very promising technologies for efficient electrical energy generation. The development of enhanced system components and new engineering solutions is fundamental for the large-scale deployment of these devices. Besides automotive and stationary applications, fuel cells can be widely used as auxiliary power units (APUs. The concept of a direct methanol fuel cell (DMFC is based on the direct feed of a methanol solution to the fuel cell anode, thus simplifying safety, delivery, and fuel distribution issues typical of conventional hydrogen-fed polymer electrolyte fuel cells (PEMFCs. In order to evaluate the feasibility of concrete application of DMFC devices, a cost analysis study was carried out in the present work. A 200 W-prototype developed in the framework of a European Project (DURAMET was selected as the model system. The DMFC stack had a modular structure allowing for a detailed evaluation of cost characteristics related to the specific components. A scale-down approach, focusing on the model device and projected to a mass production, was used. The data used in this analysis were obtained both from research laboratories and industry suppliers specialising in the manufacturing/production of specific stack components. This study demonstrates that mass production can give a concrete perspective for the large-scale diffusion of DMFCs as APUs. The results show that the cost derived for the DMFC stack is relatively close to that of competing technologies and that the introduction of innovative approaches can result in further cost savings.

  15. Implementation of a departmental picture archiving and communication system: a productivity and cost analysis.

    Science.gov (United States)

    Macyszyn, Luke; Lega, Brad; Bohman, Leif-Erik; Latefi, Ahmad; Smith, Michelle J; Malhotra, Neil R; Welch, William; Grady, Sean M

    2013-09-01

    Digital radiology enhances productivity and results in long-term cost savings. However, the viewing, storage, and sharing of outside imaging studies on compact discs at ambulatory offices and hospitals pose a number of unique challenges to a surgeon's efficiency and clinical workflow. To improve the efficiency and clinical workflow of an academic neurosurgical practice when evaluating patients with outside radiological studies. Open-source software and commercial hardware were used to design and implement a departmental picture archiving and communications system (PACS). The implementation of a departmental PACS system significantly improved productivity and enhanced collaboration in a variety of clinical settings. Using published data on the rate of information technology problems associated with outside studies on compact discs, this system produced a cost savings ranging from $6250 to $33600 and from $43200 to $72000 for 2 cohorts, urgent transfer and spine clinic patients, respectively, therefore justifying the costs of the system in less than a year. The implementation of a departmental PACS system using open-source software is straightforward and cost-effective and results in significant gains in surgeon productivity when evaluating patients with outside imaging studies.

  16. Application of the discounted value flows method in production cost calculations for Czechoslovak nuclear power plants

    International Nuclear Information System (INIS)

    Majer, P.

    1990-01-01

    The fundamentals are outlined of the discounted value flows method, which is used in industrial countries for calculating the specific electricity production costs. Actual calculations were performed for the first two units of the Temelin nuclear power plant. All costs associated with the construction, operation and decommissioning of this nuclear power plant were taken into account. With a high degree of certainty, the specific production costs of the Temelin nuclear power plant will lie within the range of 0.32 to 0.36 CSK/kWh. Nearly all results of the sensitivity analysis performed for the possible changes in the input values fall within this range. An increase in the interest rate to above 8% is an exception; this, however, can be regarded as rather improbable on a long-term basis. Sensitivity analysis gave evidence that the results of the electricity production cost calculations for the Temelin nuclear power plant can be considered sufficiently stable. (Z.M.). 7 figs., 2 tabs., 14 refs

  17. System Evaluations and Life-Cycle Cost Analyses for High-Temperature Electrolysis Hydrogen Production Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Edwin A. Harvego; James E. O' Brien; Michael G. McKellar

    2012-05-01

    This report presents results of system evaluations and lifecycle cost analyses performed for several different commercial-scale high-temperature electrolysis (HTE) hydrogen production concepts. The concepts presented in this report rely on grid electricity and non-nuclear high-temperature process heat sources for the required energy inputs. The HYSYS process analysis software was used to evaluate both central plant designs for large-scale hydrogen production (50,000 kg/day or larger) and forecourt plant designs for distributed production and delivery at about 1,500 kg/day. The HYSYS software inherently ensures mass and energy balances across all components and it includes thermodynamic data for all chemical species. The optimized designs described in this report are based on analyses of process flow diagrams that included realistic representations of fluid conditions and component efficiencies and operating parameters for each of the HTE hydrogen production configurations analyzed. As with previous HTE system analyses performed at the INL, a custom electrolyzer model was incorporated into the overall process flow sheet. This electrolyzer model allows for the determination of the average Nernst potential, cell operating voltage, gas outlet temperatures, and electrolyzer efficiency for any specified inlet steam, hydrogen, and sweep-gas flow rates, current density, cell active area, and external heat loss or gain. The lifecycle cost analyses were performed using the H2A analysis methodology developed by the Department of Energy (DOE) Hydrogen Program. This methodology utilizes spreadsheet analysis tools that require detailed plant performance information (obtained from HYSYS), along with financial and cost information to calculate lifecycle costs. There are standard default sets of assumptions that the methodology uses to ensure consistency when comparing the cost of different production or plant design options. However, these assumptions may also be varied within the

  18. Expected and Realized Costs and Benefits from Implementing Product Configuration Systems

    DEFF Research Database (Denmark)

    Edwards, Kasper

    2010-01-01

    Product configuration systems (PCS) are a technology well suited for mass customization and support the task of configuring the product to the individual customer’s needs. PCS are at the same time complex software systems that may be tailored to solve a variety of problems for a firm, e.......g. supporting the quotation process or validating the structure of a product. This paper reports findings from a study of 12 Danish firms, which at the time of the study have implemented or are in the process of implementing product configuration systems. 12 costs and 12 benefits are identified in literature...... organization. It is observed that product configuration projects are treated as simple technical projects although they should be regarded as organizational change projects....

  19. Comparison of electricity production costs of nuclear and coal-fired power plants

    International Nuclear Information System (INIS)

    Peltzer, M.

    1980-01-01

    Electricity production costs of nuclear and coal-fired power plants their structure and future development are calculated and compared. Assumed beginning of operation is in the mid-1980. The technical and economical data are based on a nuclear power unit of 1 300 MW and on a coal-fired twin plant of 2 x 750 MW. The study describes and discusses the calculational method and the results. The costs for the electricity generation show an economic advantage for nuclear power. A sensitivity analysis shows that these results are valid also for changed input parameters. (orig.) [de

  20. CO2 emission costs and Gas/Coal competition for power production

    International Nuclear Information System (INIS)

    Santi, Federico

    2005-01-01

    This paper demonstrates how a CO 2 emission reduction programme can change the competition between the two power production technologies which will probably dominate the future of the Italian power industry: the coal fired USC steam power plant and the natural gas fired CCGT power plant. An economic value of the CO 2 emission is calculated, in order to make the short-run-marginal-cost (or the long-run-marginal-cost). equal for both technologies, under a CO 2 emission trading scheme and following a single-plant specific CO 2 emission homogenizing approach [it

  1. Potential and costs of electrolytical hydrogen production by secondary energy in Brazil

    International Nuclear Information System (INIS)

    Souza, S. N. M. de; Silva, E. P. da

    1998-01-01

    This paper makes a description of the availability supply secondary hydroelectric power (secondary energy) in the Brazilian interconnected hydroelectric systems, then with the data attained it is made an estimation of electrolytical hydrogen that can be produced by means of Brazilian secondary hydroelectric power. Also are determined the costs of electrolytical hydrogen production, by way of utilisation of the secondary hydroelectric power availability in the hydroelectric system of the South and Southeastern regions, with the variation of hydrogen plant capacity that allow identify the cases where hydrogen can be produced at a lower costs. (author)

  2. The effective cost of tritium for tokamak fusion power reactors with reduced tritium production systems

    International Nuclear Information System (INIS)

    Gilligan, J.G.; Evans, K.

    1983-01-01

    If sufficient tritium cannot be produced and processed in tokamak blankets then at least two alternatives are possible. Tritium can be purchased; or reactors with reduced tritium (RT) content in the plasma can be designed. The latter choice may require development of magnet technology etc., but the authors show that the impact on the cost-of-electricity may be mild. Cost tradeoffs are compared to the market value of tritium. Adequate tritium production in fusion blankets is preferred, but the authors show there is some flexibility in the deployment of fusion if this is not possible

  3. A high volume cost efficient production macrostructuring process. [for silicon solar cell surface treatment

    Science.gov (United States)

    Chitre, S. R.

    1978-01-01

    The paper presents an experimentally developed surface macro-structuring process suitable for high volume production of silicon solar cells. The process lends itself easily to automation for high throughput to meet low-cost solar array goals. The tetrahedron structure observed is 0.5 - 12 micron high. The surface has minimal pitting with virtually no or very few undeveloped areas across the surface. This process has been developed for (100) oriented as cut silicon. Chemi-etched, hydrophobic and lapped surfaces were successfully texturized. A cost analysis as per Samics is presented.

  4. The influence of network characteristics on costs in pharmaceutical new product development

    DEFF Research Database (Denmark)

    Buonansegna, Erika; Schultz, Carsten; Stargardt, Tom

    2015-01-01

    This paper develops a model relating prior experiences, network stability, exclusive partnership, geographical distance, and intermediation in inter-firm R&D networks to new product development (NPD) costs. The developed hypotheses are tested with unique multilevel R&D partnership data from 33...... becomes relevant for non-exclusive partnerships and dispersed networks. NPD costs also increase in more stable networks, reflecting the relevance of structural holes for control and information advantages. This study contributes to the network management literature by understanding the relation between...

  5. Plan 96 - Costs for management of the radioactive waste from nuclear power production

    International Nuclear Information System (INIS)

    1996-06-01

    This report presents a calculation of the costs for implementing all measures needed to manage and dispose of spent nuclear fuel and radioactive wastes from the Swedish nuclear power reactors. The cost calculations include costs for R,D and D as well as for decommissioning and dismantling the reactor plants etc. The following facilities and systems are already in operation: Transportation system for radioactive waste products, Central interim storage facility for spent nuclear fuel, Final repository for radioactive operational wastes. Plans exist for: Encapsulation plant for spent nuclear fuel, Deep repository for spent fuel and other long-lived waste, Final repository for decommissioning waste. The total future costs, in Jan 1996 prices, for the Swedish waste system from 1997 have been calculated to be 42.2 billion SEK (about 6.4 billion USD). The total costs apply for the waste obtained from 25 years of operation of all Swedish reactors. It is estimated that 10.6 billion SEK in current money has been spent through 1996. Costs based on waste quantities from operation of the reactors for 40 years are also reported. 6 refs

  6. Impact of air pollution control costs on the cost and spatial arrangement of cellulosic biofuel production in the U.S.

    Science.gov (United States)

    Murphy, Colin W; Parker, Nathan C

    2014-02-18

    Air pollution emissions regulation can affect the location, size, and technology choice of potential biofuel production facilities. Difficulty in obtaining air pollutant emission permits and the cost of air pollution control devices have been cited by some fuel producers as barriers to development. This paper expands on the Geospatial Bioenergy Systems Model (GBSM) to evaluate the effect of air pollution control costs on the availability, cost, and distribution of U.S. biofuel production by subjecting potential facility locations within U.S. Clean Air Act nonattainment areas, which exceed thresholds for healthy air quality, to additional costs. This paper compares three scenarios: one with air quality costs included, one without air quality costs, and one in which conversion facilities were prohibited in Clean Air Act nonattainment areas. While air quality regulation may substantially affect local decisions regarding siting or technology choices, their effect on the system as a whole is small. Most biofuel facilities are expected to be sited near to feedstock supplies, which are seldom in nonattainment areas. The average cost per unit of produced energy is less than 1% higher in the scenarios with air quality compliance costs than in scenarios without such costs. When facility construction is prohibited in nonattainment areas, the costs increase by slightly over 1%, due to increases in the distance feedstock is transported to facilities in attainment areas.

  7. The opportunity cost of family labor in the economy of the dairy production in Michoacan, Mexico

    Directory of Open Access Journals (Sweden)

    Randy Alexis Jiménez Jiménez

    2014-05-01

    Full Text Available The objective of this research is to analyze associated factors with the variation of the profit margin and the influence of the opportunity cost of family labor in the economic profit of the family dairy in the municipality of Maravatio, Michoacan. Productive economic information was obtained through the use of questionnaires, semi-structured interviews and direct observation, using the methodology of Participatory Action Research. The opportunity cost of workforce was established on the basis of the work options for the family members involved in the activity; the options were classified into three types: local, regional, and foreign, according to the location of the job opportunities. In order to determine the influence of family labor in earning, it was used a multiple regression model with inclusion of step-by-step variables. The livestock feed represented the highest index of determination of the profit margin variation with the 68 %. Family labor is one of the variables that have an adverse impact on the profitability of the production units, it represented 26% of the variation of economic gain, with a negative linear relation of -1.05 (P ≤0.001. The best labor alternatives for producers, when emigrating, show that family labor is not the productive factor allowing them to have earnings; however, the dairy activity provides productive and economic sustenance for people with a local and regional opportunity cost.

  8. The role of research and development work on the production costs of logging residue chips

    International Nuclear Information System (INIS)

    Nousiainen, I.

    1998-01-01

    Purchase of logging residue chips in the early 80s was mainly based on production chains in which the residues were collected with load-carrying tractors at the road-side storage, from which it was chipped or crushed directly into the trailer of a waiting lorry. Six new production chains were developed in the national Bioenergy Research Programme. Three of these are now commercial. Kotimaiset Energiat Pekka Lahti Ky has developed, on the basis of a traditional logging residue production chain, a high-efficiency EVOLUTION intermediate storage chipper, suitable for chipping of logging residues. Oy Logset Ab has developed a new type of lot-chipping chip-harvester, the LOGSET 536C. Nested containers have also been developed for the lot-chipping method. MOHA multi-purpose chipper, in which the chipping and lorry-transportation of chips have been integrated, has also been developed as a part of the research programme. In addition to these, a chipper-container lorry combination, transportation of complete logging residues, and whole- tree skidding have been developed in the project for production of logging residue chips. In the beginning of the 80s the production costs of logging residues at the place of utilization were about 52 FIM/MWh, and the average transportation distance 50 km. In 1992 the production costs, 64 FIM/MWh at the distance of 100 km, was significantly higher than the price of alternative fuels. The lowest production cost level, obtainable by the developed methods is 46 FIM/MWh

  9. Improvement Strategies, Cost Effective Production, and Potential Applications of Fungal Glucose Oxidase (GOD): Current Updates.

    Science.gov (United States)

    Dubey, Manish K; Zehra, Andleeb; Aamir, Mohd; Meena, Mukesh; Ahirwal, Laxmi; Singh, Siddhartha; Shukla, Shruti; Upadhyay, Ram S; Bueno-Mari, Ruben; Bajpai, Vivek K

    2017-01-01

    Fungal glucose oxidase (GOD) is widely employed in the different sectors of food industries for use in baking products, dry egg powder, beverages, and gluconic acid production. GOD also has several other novel applications in chemical, pharmaceutical, textile, and other biotechnological industries. The electrochemical suitability of GOD catalyzed reactions has enabled its successful use in bioelectronic devices, particularly biofuel cells, and biosensors. Other crucial aspects of GOD such as improved feeding efficiency in response to GOD supplemental diet, roles in antimicrobial activities, and enhancing pathogen defense response, thereby providing induced resistance in plants have also been reported. Moreover, the medical science, another emerging branch where GOD was recently reported to induce several apoptosis characteristics as well as cellular senescence by downregulating Klotho gene expression. These widespread applications of GOD have led to increased demand for more extensive research to improve its production, characterization, and enhanced stability to enable long term usages. Currently, GOD is mainly produced and purified from Aspergillus niger and Penicillium species, but the yield is relatively low and the purification process is troublesome. It is practical to build an excellent GOD-producing strain. Therefore, the present review describes innovative methods of enhancing fungal GOD production by using genetic and non-genetic approaches in-depth along with purification techniques. The review also highlights current research progress in the cost effective production of GOD, including key advances, potential applications and limitations. Therefore, there is an extensive need to commercialize these processes by developing and optimizing novel strategies for cost effective GOD production.

  10. Cost-effectiveness analysis: adding value to assessment of animal health welfare and production.

    Science.gov (United States)

    Babo Martins, S; Rushton, J

    2014-12-01

    Cost-effectiveness analysis (CEA) has been extensively used in economic assessments in fields related to animal health, namely in human health where it provides a decision-making framework for choices about the allocation of healthcare resources. Conversely, in animal health, cost-benefit analysis has been the preferred tool for economic analysis. In this paper, the use of CEA in related areas and the role of this technique in assessments of animal health, welfare and production are reviewed. Cost-effectiveness analysis can add further value to these assessments, particularly in programmes targeting animal welfare or animal diseases with an impact on human health, where outcomes are best valued in natural effects rather than in monetary units. Importantly, CEA can be performed during programme implementation stages to assess alternative courses of action in real time.

  11. Study to establish cost predictions for the production of Redox chemicals

    Science.gov (United States)

    Ammann, P. R.; Loreth, M.; Harvey, W. W.

    1982-01-01

    The chromium and iron chloride chemicals are significant first costs for NASA Redox energy storage systems. This study was performed to determine the lowest cost at which chromium and iron chlorides could be obtained for a complex of redox energy storage systems. In addition, since the solutions gradually become intermixed during the course of operation of Redox units, it was an objective to evaluate schemes for regeneration of the operating solutions. Three processes were evaluated for the production of chromium and iron chlorides. As a basis for the preliminary plant design and economic evaluation, it was assumed that the plant would produce about 25,000 tons of contained chromium as CrCl3 and an equivalent molar quantity of FeCl2. Preliminary plant designs, including materials and energy balances and sizing of major equipment, were prepared, and capital and operating costs were estimated.

  12. GENDER AND COST EFFICIENCY IN MAIZE PRODUCTION IN OYO STATE OF NIGERIA

    Directory of Open Access Journals (Sweden)

    Ogunniyi Titi Laudia

    2009-12-01

    Full Text Available The issues of gender in smallholder farmers in Nigeria have been widely debated in terms of marginalization in main input leaving out the efficient use of these resources. In this paper, an empirical assessment of smallholder cost efficiency and its determinants using stochastic cost frontier function was conducted. In addition, regression and paired sample t-test were used to examine the determinants of efficiency. The results indicates that labour is an important factor of production for both male and female farmers and that female are more cost inefficient than their male counterparts The study concluded that there should be a review of the agricultural policy that will address the existing gender bias in assessing agricultural inputs.

  13. A Cost Framework for the Economic Feasibility of Wide-Scale Biochar Production

    Science.gov (United States)

    Pourhashem, G.; Masiello, C. A.; Medlock, K. B., III

    2017-12-01

    Biochar is a product of biomass pyrolysis, one of the main thermal pathways of producing biofuels. In addition to sequestering carbon, biochar's soil application helps sustainable agriculture by enhancing soil's structure and ecological functions, as well as lowering NO release from fertilized soils. However, wide-scale biochar land amendment has been limited in part due to its high cost. To examine biochar's cost dynamics, we develop a comprehensive framework for a representative biochar production facility and identify system inputs that are the key drivers of cost and profitability. We assess the production cost of fast and slow pyrolysis-biochar considering a range of parameters e.g. biomass type, process design and scale. We analyzed techno-economic cost data for producing biochar using simulated data from academic literature, and active producer data collected under confidentiality agreement. The combined approach was used to enhance the depth of the dataset and allowed for a reasonable check on published simulated data. Fast and slow pyrolysis have different biofuel and biochar yields and profit. A slow pyrolysis facility recovers its expenses mainly through biochar sale while a fast pyrolysis facility generates its primary revenue through biofuel sale, largely considering biochar a byproduct. Unlike fast pyrolysis that has received most attention in techno-economic studies, publicly available techno-economic data of slow pyrolysis is sparse. This limits the ability to run a thorough cost-benefit analysis to inform the feasibility of wider adoption of biochar for capturing its carbon sequestration and broader environmental benefits. Our model allows for consideration of various market-based policy instruments and can be used as an analytical decision making tool for investors and policy makers to estimate the cost and optimum facility size. This dynamic framework can also be adapted to account for the availability of new data as technology improves and

  14. Asymmetric Switch Costs in numeral naming and number word reading: Implications for models of bilingual language production

    Directory of Open Access Journals (Sweden)

    Michael eReynolds

    2016-01-01

    Full Text Available One approach used to gain insight into the processes underlying bilingual language comprehension and production examines the costs that arise from switching languages. For unbalanced bilinguals, asymmetric switch costs are reported in speech production, where the switch cost for L1 is larger than the switch cost for L2, whereas, symmetric switch costs are reported in language comprehension tasks, where the cost of switching is the same for L1 and L2. Presently, it is unclear why asymmetric switch costs are observed in speech production, but not in language comprehension. Three experiments are reported that simultaneously examine methodological explanations of task related differences in the switch cost asymmetry and the predictions of three accounts of the switch cost asymmetry in speech production. The results of these experiments suggest that (1 the type of language task (comprehension vs. production determines whether an asymmetric switch cost is observed and (2 at least some of the switch cost asymmetry arises within the language system.

  15. Uncertainty quantification metrics for whole product life cycle cost estimates in aerospace innovation

    Science.gov (United States)

    Schwabe, O.; Shehab, E.; Erkoyuncu, J.

    2015-08-01

    The lack of defensible methods for quantifying cost estimate uncertainty over the whole product life cycle of aerospace innovations such as propulsion systems or airframes poses a significant challenge to the creation of accurate and defensible cost estimates. Based on the axiomatic definition of uncertainty as the actual prediction error of the cost estimate, this paper provides a comprehensive overview of metrics used for the uncertainty quantification of cost estimates based on a literature review, an evaluation of publicly funded projects such as part of the CORDIS or Horizon 2020 programs, and an analysis of established approaches used by organizations such NASA, the U.S. Department of Defence, the ESA, and various commercial companies. The metrics are categorized based on their foundational character (foundations), their use in practice (state-of-practice), their availability for practice (state-of-art) and those suggested for future exploration (state-of-future). Insights gained were that a variety of uncertainty quantification metrics exist whose suitability depends on the volatility of available relevant information, as defined by technical and cost readiness level, and the number of whole product life cycle phases the estimate is intended to be valid for. Information volatility and number of whole product life cycle phases can hereby be considered as defining multi-dimensional probability fields admitting various uncertainty quantification metric families with identifiable thresholds for transitioning between them. The key research gaps identified were the lacking guidance grounded in theory for the selection of uncertainty quantification metrics and lacking practical alternatives to metrics based on the Central Limit Theorem. An innovative uncertainty quantification framework consisting of; a set-theory based typology, a data library, a classification system, and a corresponding input-output model are put forward to address this research gap as the basis

  16. Information About Cost of Goods Produced and its Usefulness for Production Engineers - A Case of SME

    Science.gov (United States)

    Maruszewska, Ewa Wanda; Strojek-Filus, Marzena; Drábková, Zita

    2017-12-01

    The article stresses the consequences of simplifications implemented in the measurement process of goods produced that are of crucial importance to production engineers in SME. The authors show the variety of possibilities that might be used by financial employees together with probable outputs in terms of valuation distortions. Using the case study the authors emphasis the importance of close cooperation of production engineers with finance professionals as out-puts of finance departments consist an important input for decision-making process of production managers. Further-more, demonstrated deficiencies in terms of methods applicable in financial reporting for measurement of the value of goods produced indicate the need for incorporation more financial and non-financial data in the process of judgments about the final cost of goods produced as simplifications applied in SME distort financial information provided to production engineers.

  17. The Effect of Safety Costs on Productivity and Quality: A Case Study of Five Steel Companies in Ahvaz

    Directory of Open Access Journals (Sweden)

    Gholamabbas Shirali

    2016-10-01

    Full Text Available Background The implementation of a safety program is one of the most effective factors in increasing productivity. A look to safety from the perspective of efficiency can indicate necessary investment in safety for all, especially the managers of companies. Objectives The aim of this study was to evaluate the effect of safety costs on some indicators of productivity and quality in industrial companies. Methods This study was a retrospective analysis and was implemented in five steel companies in Ahvaz. The data relating to the safety costs such as staffing costs and total safety costs, and productivity and quality indicators were collected in five years. This information and data were collected according to statistics from documents and archives of safety, accounting, and production sectors of companies. Costs as well as numbers and figures of variables were expressed in the form of per capita and percentage to make the data comparable. Linear and generalized regression models and Wald Chi-Square test were used by the SPSS 22 software to determine the relationships between them. Results Safety costs such as capita labor safety costs and capita total safety costs or percentage safety labor costs to labor costs, showed a significant positive effect on labor productivity, labor competitiveness, total factor productivity, quality index and production rates (in some cases, P = 0.001. Conclusions The total safety cost and safety labor compensation generally, regardless of the nature and quality of the safety management system, can impact productivity, quality and quantity of production in addition to other factors of production. Surely if safety programs are targeted and codified, the effect of the investment will be doubled.

  18. Telecommuting and health care: a potential for cost reductions and productivity gains.

    Science.gov (United States)

    Jacobs, S M; Pelfrey, S; Van Sell, M

    1995-12-01

    Health care administrators are striving to maintain positive operating margins while remaining responsive to community needs. As they look for ways to reduce costs and improve productivity, they may consider the benefits associated with telecommuting. Telecommuting refers to the work performed by organizational employees who use computers and telecommunication equipment to work at home or at remote sites one or more days a week. Benefits to the health care industry include release of valuable hospital space, reduced employee turnover, and increased productivity. The time away from the institution may provide administrators with valuable planning time, free from interruptions.

  19. Grid Integration of Aggregated Demand Response, Part 2: Modeling Demand Response in a Production Cost Model

    Energy Technology Data Exchange (ETDEWEB)

    Hummon, Marissa [National Renewable Energy Lab. (NREL), Golden, CO (United States); Palchak, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jorgenson, Jennie [National Renewable Energy Lab. (NREL), Golden, CO (United States); Olsen, Daniel J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kiliccote, Sila [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Matson, Nance [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Sohn, Michael [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Rose, Cody [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Dudley, Junqiao [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Goli, Sasank [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Ma, Ookie [U.S. Dept. of Energy, Washington, DC (United States)

    2013-12-01

    This report is one of a series stemming from the U.S. Department of Energy (DOE) Demand Response and Energy Storage Integration Study. This study is a multi-national-laboratory effort to assess the potential value of demand response (DR) and energy storage to electricity systems with different penetration levels of variable renewable resources and to improve our understanding of associatedmarkets and institutions. This report implements DR resources in the commercial production cost model PLEXOS.

  20. Nest predation, clutch size, and physiological costs of egg production in the song sparrow (Melospiza melodia)

    OpenAIRE

    Travers, Marc Simon

    2009-01-01

    We examined the effects of nest predation on both clutch size and the physiological cost of egg production using a clutch removal experiment in free-living song sparrows (Melospiza melodia), inducing “high nest predation” (HNP) females to produce many replacement clutches compared to “low nest predation” (LNP) females. In a preliminary analysis we investigated the utility of multiple measures to assess “physiological condition”, including inter-correlations between physiological traits, sex d...

  1. Production and cost analysis of a feller-buncher in central Appalachian hardwood forest

    Science.gov (United States)

    Charlie Long; Jingxin Wang; Joe McNeel; John Baumgras; John Baumgras

    2002-01-01

    A time study was conducted to evaluate the productivity and cost of a feller-buncher operating in a Central Appalachian hardwood forest. The sites harvested during observation consisted of primarily red maple and black cherry. Trees felled in the study had an average diameter at breast height (DBH) of 16.1 in. and a total merchantable height of 16 ft. A Timbco 445C...

  2. The competitiveness of domestic rice production in East Africa: A domestic resource cost approach in Uganda

    Directory of Open Access Journals (Sweden)

    Masao Kikuchi

    2016-03-01

    Full Text Available The rapid increase of rice imports in sub-Saharan Africa under the unstable situation in the world rice market during the 2000s has made it an important policy target for the countries in the region to increase self-sufficiency in rice in order to enhance food security. Whether domestic rice production can be competitive with imported rice is a serious question in East African countries that lie close, just across the Arabian Sea, to major rice exporting countries in South Asia. This study investigates the international competitiveness of domestic rice production in Uganda in terms of the domestic resource cost ratio. The results show that rainfed rice cultivation, which accounts for 95% of domestic rice production, does not have a comparative advantage with respect to rice imported from Pakistan, the largest supplier of imported rice to Uganda. However, the degree of non-competitiveness is not serious, and a high possibility exists for Uganda’s rainfed rice cultivation to become internationally competitive by improving yield levels by applying more modern inputs and enhancing labour productivity. Irrigated rice cultivation, though very limited in area, is competitive even under the present input-output structure when the cost of irrigation infrastructure is treated as a sunk cost. If the cost of installing irrigation infrastructure and its operation and maintenance is taken into account, the types of irrigation development that are economically feasible are not large-scale irrigation projects, but are small- and microscale projects for lowland rice cultivation and rain-water harvesting for upland rice cultivation.

  3. The Effects of Cost Leadership Strategy and Product Differentiation Strategy on the Performance of Firms

    OpenAIRE

    Hashem Valipour; Hamid Birjandi; Samira Honarbakhsh

    2012-01-01

    This study empirically investigates the effects of business strategies on the relationship between financial leverage and the performance of firms. The research data is collected from 45 firms in the Tehran Security Exchange (TSE) during 2003-2010.The statistical technique is used to examine the assumption of multiple regressions. To test the assumptions, firms were divided into 2 groups: firms with cost leadership strategy and firms with product differentiation strategy. The results indicate...

  4. Analysis of Product Complexity considering Disruption Cost in Fast Fashion Supply Chain

    Directory of Open Access Journals (Sweden)

    Shaheen Sardar

    2015-01-01

    Full Text Available Outsourcing in the textile industry has been playing an important role in the global economy for six decades. Recently, reshoring is an emerging trend due to various complexities involved in supply chain management. As compared with basic textile and apparel products, fast fashion products are complex in their own way. A single assortment contains several new styles, colors, and sizes with unpredictable demand and urgent deadlines. Numerous assortments run simultaneously in the supply chain. For each assortment, the garment manufacturer has to source various types of fabrics and materials from different suppliers and then manufacture the garments to ship within the deadlines. This complexity contributes to supply chain disruption. This paper develops a model to estimate supply chain disruption cost as a function of fast fashion product complexity in the global outsourcing environment. Estimation of disruption cost will help us to increase visibility and eliminate the bottlenecks in supply chain. Model conclusions are used to develop a method to manage the level of product complexity from the global supply chain perspective. Several strategies are proposed to manage the impact of product complexity on supply chain design.

  5. Biosurfactants production by yeasts using soybean oil and glycerol as low cost substrate.

    Science.gov (United States)

    Accorsini, Fábio Raphael; Mutton, Márcia Justino Rossini; Lemos, Eliana Gertrudes Macedo; Benincasa, Maria

    2012-01-01

    Biosurfactants are bioactive agents that can be produced by many different microorganisms. Among those, special attention is given to yeasts, since they can produce many types of biosurfactants in large scale, using several kinds of substrates, justifying its use for industrial production of those products. For this production to be economically viable, the use of residual carbon sources is recommended. The present study isolated yeasts from soil contaminated with petroleum oil hydrocarbons and assessed their capacity for producing biosurfactants in low cost substrates. From a microbial consortium enriched, seven yeasts were isolated, all showing potential for producing biosurfactants in soybean oil. The isolate LBPF 3, characterized as Candida antarctica, obtained the highest levels of production - with a final production of 13.86 g/L. The isolate LBPF 9, using glycerol carbon source, obtained the highest reduction in surface tension in the growth medium: approximately 43% of reduction after 24 hours of incubation. The products obtained by the isolates presented surfactant activity, which reduced water surface tension to values that varied from 34 mN/m, obtained from the product of isolates LBPF 3 and 16 LBPF 7 (respectively characterized as Candida antarctica and Candida albicans) to 43 mN/m from the isolate LPPF 9, using glycerol as substrate. The assessed isolates all showed potential for the production of biosurfactants in conventional sources of carbon as well as in agroindustrial residue, especially in glycerol.

  6. Biosurfactants production by yeasts using soybean oil and glycerol as low cost substrate

    Directory of Open Access Journals (Sweden)

    Fábio Raphael Accorsini

    2012-03-01

    Full Text Available Biosurfactants are bioactive agents that can be produced by many different microorganisms. Among those, special attention is given to yeasts, since they can produce many types of biosurfactants in large scale, using several kinds of substrates, justifying its use for industrial production of those products. For this production to be economically viable, the use of residual carbon sources is recommended. The present study isolated yeasts from soil contaminated with petroleum oil hydrocarbons and assessed their capacity for producing biosurfactants in low cost substrates. From a microbial consortium enriched, seven yeasts were isolated, all showing potential for producing biosurfactants in soybean oil. The isolate LBPF 3, characterized as Candida antarctica, obtained the highest levels of production - with a final production of 13.86 g/L. The isolate LBPF 9, using glycerol carbon source, obtained the highest reduction in surface tension in the growth medium: approximately 43% of reduction after 24 hours of incubation. The products obtained by the isolates presented surfactant activity, which reduced water surface tension to values that varied from 34 mN/m, obtained from the product of isolates LBPF 3 and 16 LBPF 7 (respectively characterized as Candida antarctica and Candida albicans to 43 mN/m from the isolate LPPF 9, using glycerol as substrate. The assessed isolates all showed potential for the production of biosurfactants in conventional sources of carbon as well as in agroindustrial residue, especially in glycerol.

  7. Cost of production. Maximize profitability in the manufacture of solar modules; Maximizar la rentabilidad en la fabricacion de modulos solares

    Energy Technology Data Exchange (ETDEWEB)

    King, G. R.

    2011-07-01

    Plus the cost of photovoltaic energy production, parity with the network also consider the total investment made to generate a certain amount of energy. Some factors to consider include production, labor, initial cost of system components, installation, operation and maintenance. (Author)

  8. Productivity and cost estimators for conventional ground-based skidding on steep terrain using preplanned skid roads

    Science.gov (United States)

    Michael D. Erickson; Curt C. Hassler; Chris B. LeDoux

    1991-01-01

    Continuous time and motion study techniques were used to develop productivity and cost estimators for the skidding component of ground-based logging systems, operating on steep terrain using preplanned skid roads. Comparisons of productivity and costs were analyzed for an overland random access skidding method, verses a skidding method utilizing a network of preplanned...

  9. Overall requirements for an advanced underground coal extraction system. [environment effects, miner health and safety, production cost, and coal conservation

    Science.gov (United States)

    Goldsmith, M.; Lavin, M. L.

    1980-01-01

    Underground mining systems suitable for coal seams expoitable in the year 2000 are examined with particular relevance to the resources of Central Appalachia. Requirements for such systems may be summarized as follows: (1) production cost; (2)miner safety; (3) miner health; (4) environmental impact; and (5) coal conservation. No significant trade offs between production cost and other performance indices were found.

  10. Evaluation of the external costs of energy production in the Helsinki metropolitan area

    International Nuclear Information System (INIS)

    Otterstroem, T.

    1995-01-01

    The aim of the research is to evaluate the external costs of energy production at Helsinki metropolitan area (Helsinki, Espoo, Vantaa). The previously developed valorization method for effects on population centres is adjusted. All the main health, material and environmental effects will be taken into account in the research. The effects of emissions of the energy production of the Helsinki metropolitan area on concentrations of the impurities in the air and through them on human and environment will be evaluated. The estimates will be based on the relativistic fuels consumption and the emission data of Helsinki metropolitan area. Life-cycle reasoning will be applied so that the emissions of the main components of the fuels used in the metropolitan area will be included in the estimation. The cost-effectiveness of the investments will be estimated by comparing the environmental investments of energy boards with the external costs. The methods of this work can be applied to estimation of the profitability of energy production plants from the point of view of national economy also elsewhere in the country

  11. Production methods and costs of oxygen free copper canisters for nuclear waste disposal

    International Nuclear Information System (INIS)

    Aalto, H.; Rajainmaeki, H.; Laakso, L.

    1996-10-01

    The fabrication technology and costs of various manufacturing alternatives to make large copper canisters for disposal of spent nuclear fuel from reactors of Teollisuuden Voima Oy (TVO) and Imatran Voima Oy (IVO) are discussed. The canister design is based on the Posiva's concept where solid insert structure is surrounded by the copper mantle. During recent years Outokumpu Copper Products and Posiva have continued their work on development of the copper canisters. Outokumpu Copper Products has also increased capability to manufacture these canisters. In the study the most potential manufacturing methods and their costs are discussed. The cost estimates are based on the assumption that Outokumpu will supply complete copper mantles. At the moment there are at least two commercially available production methods for copper cylinder manufacturing. These routes are based on either hot extrusion of the copper tube or hot rolling, bending and EB-welding of the tube. Trial fabrications has been carried out with both methods for the full size canisters. These trials of the canisters has shown that both the forming from rolled plate and the extrusion are possible methods for fabricating copper canisters on a full scale. (orig.) (26 refs.)

  12. The cost of ethanol production from lignocellulosic biomass -- A comparison of selected alternative processes. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Grethlein, H.E.; Dill, T.

    1993-04-30

    The purpose of this report is to compare the cost of selected alternative processes for the conversion of lignocellulosic biomass to ethanol. In turn, this information will be used by the ARS/USDA to guide the management of research and development programs in biomass conversion. The report will identify where the cost leverages are for the selected alternatives and what performance parameters need to be achieved to improve the economics. The process alternatives considered here are not exhaustive, but are selected on the basis of having a reasonable potential in improving the economics of producing ethanol from biomass. When other alternatives come under consideration, they should be evaluated by the same methodology used in this report to give fair comparisons of opportunities. A generic plant design is developed for an annual production of 25 million gallons of anhydrous ethanol using corn stover as the model substrate at $30/dry ton. Standard chemical engineering techniques are used to give first order estimates of the capital and operating costs. Following the format of the corn to ethanol plant, there are nine sections to the plant; feed preparation, pretreatment, hydrolysis, fermentation, distillation and dehydration, stillage evaporation, storage and denaturation, utilities, and enzyme production. There are three pretreatment alternatives considered: the AFEX process, the modified AFEX process (which is abbreviated as MAFEX), and the STAKETECH process. These all use enzymatic hydrolysis and so an enzyme production section is included in the plant. The STAKETECH is the only commercially available process among the alternative processes.

  13. FORECAST PRODUCTION COSTS SUGAR IN THE PROVINCE OF SANTIAGO DE CUBA THROUGH ECONOMETRIC TECHNIQUES

    Directory of Open Access Journals (Sweden)

    Ramón Rodríguez-Betancourt

    2016-01-01

    Full Text Available The conformation at the present time, of an economic model renovated in Cuba, it should be based in the efficient use of the productive factors which it counts the country, with emphasis in the substitution of imports. In the chapter VII, article 184 of the Limits of the Economic and Social Politics of the Party and the Revolution it can be read: "To prioritize, in short term, the substitution of imports of those foods that can be produced efficiently in the country; also it will owe to multiply the application of the results of the science and the technique."1 In fact the objective of the present investigation, using econometrics technical to carry out presage of the cost of sugar production, using factors in the productive process: days of harvest, use of the potential, recovered capacity and industrial yield. The results indicate  that the factor with more influences in the decrease of the costs is the industrial yield. It is also obtained a cost presage for the county Santiago de Cuba in different harvest stages that oscillates between $372,45 and 517,52 and it stops extreme values of $ 303,21 and $ 777,6. 

  14. RJD A Cost Effective Frackless Solution For Production Enhancement In Marginal Fields

    Directory of Open Access Journals (Sweden)

    Ahmed Kamel

    2017-02-01

    Full Text Available With the worldwide trend of low oil prices high maturity of oil fields excessive cost of horizontal and fracking technologies and necessity for green drilling applications radial jet drilling RJD technology can be a cost effective and environmentally-friendly alternative. RJD is an unconventional drilling technique that utilizes coiled tubing conveyed tools and the energy of high velocity jet fluids to drill laterals inside the reservoir. In recent years rapid advances in high pressure water jet technology has tremendously increased its application in oil and gas industry not only in drilling operations to improve drilling rate and reduce drilling cost but also in production to maximize hydrocarbon recovery. In addition RJD can be used to bypass near wellbore damage direct reservoir treatmentsinjections improve water disposal and re-injection rates and assist in steam or CO2 treatments. This paper highlights the theoretical basis technological advancement procedures applications and challenges of high pressure water jets. Several worldwide case studies are discussed to evaluate the success results pros and cons of RJD. The results show that nearly an average of four to five fold production increase can be obtained. The present paper clearly shows that radial jet drilling is a viable and attractive alternative in marginal and small reservoirs that still have significant oil in place to capture the benefits of horizontal drillingfracking and to improve productivity from both new wells andor workover wells that cannot be produced with the existing expensive conventional completions.

  15. Wind farm production cost: Optimum turbine size and farm capacity in the actual market

    Energy Technology Data Exchange (ETDEWEB)

    Laali, A.R.; Meyer, J.L.; Bellot, C. [Electricite de France, Chatou (France); Louche, A. [Espace de Recherche, Ajaccio (France)

    1996-12-31

    Several studies are undertaken in R&D Division of EDF in collaboration with ERASME association in order to have a good knowledge of the wind energy production costs. These studies are performed in the framework of a wind energy monitoring project and concern the influence of a few parameters like wind farm capacity, turbine size and wind speed on production costs, through an analysis of the actual market trend. Some 50 manufacturers and 140 different kind of wind turbines are considered for this study. The minimum production cost is situated at 800/900 kW wind turbine rated power. This point will probably move to more important powers in the future. This study is valid only for average conditions and some special parameters like particular climate conditions or lack of infrastructure for a special site the could modify the results shown on the curves. The variety of wind turbines (rated power as a function of rotor diameter, height and specific rated power) in the actual market is analyzed. A brief analysis of the market trend is also performed. 7 refs., 7 figs.

  16. Work Productivity and Costs Related to Patients with Ankylosing Spondylitis, Rheumatoid Arthritis, and Psoriasis.

    Science.gov (United States)

    Kruntorádová, Klára; Klimeš, Jiří; Šedová, Liliana; Štolfa, Jiří; Doležal, Tomáš; Petříková, Alena

    2014-09-01

    To determine and compare the impact of rheumatoid arthritis (RA), ankylosing spondylitis (AS), and psoriasis on work productivity, to calculate the productivity costs (PC), and to map out factors that influence (functional status and disease activity) work productivity. The Work Productivity and Activity Impairment questionnaire was used to evaluate productivity losses of patients with RA (n = 77), AS (n = 230), and psoriasis (n = 93). Demographic data, patient-reported outcomes (PROs) (Health Assessment Questionnaire [HAQ] and Bath Ankylosing Spondylitis Disease Activity Index [BASDAI]), and clinical parameters (Disease Activity Score in 28 joints [DAS28], body surface area [BSA], and Psoriasis Area and Severity Index [PASI]) were collected. The correlations among PROs, clinical parameters, and overall productivity loss were examined, and multiple regression models were used to examine relationships among parameters and productivity loss. PC were calculated using the friction cost approach. Mean patient age and disease duration were 47.1 and 15.7 years, respectively. The mean HAQ and DAS28 in patients with RA were 1.22 and 5.6, respectively. The mean BASDAI score in patients with AS was 4.43. The mean BSA and PASI score in patients with psoriasis were 21.1% and 12.9, respectively. The percentage of patients with psoriatic arthritis (in those with psoriasis) was 24.7%. We did not find significant differences in Work Productivity and Activity Impairment domains among various diagnoses. Patients with AS, RA, and psoriasis reported overall work productivity losses of 40.9%, 42.9%, and 42.8%, respectively. Daily activity impairments were approximately 50.0%. Overall work productivity loss strongly correlated with PROs, whereas correlations with clinical parameters were weak. The HAQ and BASDAI were identified as major predictors of productivity impairment. The greatest loss in productivity was in those with psoriatic arthritis; however, it was not significant. In

  17. The cost of lost productivity due to premature cancer-related mortality: an economic measure of the cancer burden.

    Science.gov (United States)

    Hanly, Paul A; Sharp, Linda

    2014-03-26

    Most measures of the cancer burden take a public health perspective. Cancer also has a significant economic impact on society. To assess this economic burden, we estimated years of potential productive life lost (YPPLL) and costs of lost productivity due to premature cancer-related mortality in Ireland. All cancers combined and the 10 sites accounting for most deaths in men and in women were considered. To compute YPPLL, deaths in 5-year age-bands between 15 and 64 years were multiplied by average working-life expectancy. Valuation of costs, using the human capital approach, involved multiplying YPPLL by age-and-gender specific gross wages, and adjusting for unemployment and workforce participation. Sensitivity analyses were conducted around retirement age and wage growth, labour force participation, employment and discount rates, and to explore the impact of including household production and caring costs. Costs were expressed in €2009. Total YPPLL was lower in men than women (men = 10,873; women = 12,119). Premature cancer-related mortality costs were higher in men (men: total cost = €332 million, cost/death = €290,172, cost/YPPLL = €30,558; women: total cost = €177 million, cost/death = €159,959, cost/YPPLL = €14,628). Lung cancer had the highest premature mortality cost (€84.0 million; 16.5% of total costs), followed by cancers of the colorectum (€49.6 million; 9.7%), breast (€49.4 million; 9.7%) and brain & CNS (€42.4 million: 8.3%). The total economic cost of premature cancer-related mortality in Ireland amounted to €509.5 million or 0.3% of gross domestic product. An increase of one year in the retirement age increased the total all-cancer premature mortality cost by 9.9% for men and 5.9% for women. The inclusion of household production and caring costs increased the total cost to €945.7 million. Lost productivity costs due to cancer-related premature mortality are significant. The higher premature mortality cost in males than

  18. How does accounting for worker productivity affect the measured cost-effectiveness of lumbar discectomy?

    Science.gov (United States)

    Koenig, Lane; Dall, Timothy M; Gu, Qian; Saavoss, Josh; Schafer, Michael F

    2014-04-01

    Back pain attributable to lumbar disc herniation is a substantial cause of reduced workplace productivity. Disc herniation surgery is effective in reducing pain and improving function. However, few studies have examined the effects of surgery on worker productivity. We wished to determine the effect of disc herniation surgery on workers' earnings and missed workdays and how accounting for this effect influences the cost-effectiveness of surgery? Regression models were estimated using data from the National Health Interview Survey to assess the effects of lower back pain caused by disc herniation on earnings and missed workdays. The results were incorporated into Markov models to compare societal costs associated with surgical and nonsurgical treatments for privately insured, working patients. Clinical outcomes and utilities were based on results from the Spine Patient Outcomes Research Trial and additional clinical literature. We estimate average annual earnings of $47,619 with surgery and $45,694 with nonsurgical treatment. The increased earnings for patients receiving surgery as compared with nonsurgical treatment is equal to $1925 (95% CI, $1121-$2728). After surgery, we also estimate that workers receiving surgery miss, on average, 3 fewer days per year than if workers had received nonsurgical treatment (95% CI, 2.4-3.7 days). However, these fewer missed work days only partially offset the assumed 20 workdays missed to recover from surgery. More fully accounting for the effects of disc herniation surgery on productivity reduced the cost of surgery per quality-adjusted life year (QALY) from $52,416 to $35,146 using a 4-year time horizon and from $27,359 to $4186 using an 8-year time horizon. According to a sensitivity analysis, the 4-year cost per QALY varies between $27,921 and $49,787 depending on model assumptions. Increased worker earnings resulting from disc herniation surgery may offset the increased direct medical costs associated with surgery. After

  19. EFFECT OF TAXATION ON PRODUCTION COST, ON ROTATION AND ON REFORM OF Eucalyptus spp.

    Directory of Open Access Journals (Sweden)

    José Luiz Pereira de Rezende

    2005-03-01

    Full Text Available This work was designed to determine the influence of tributes on the optimum economical age of harvestingEucalyptus spp. stands, to determine the number of cuttings between the reform of Eucalyptus spp. stands, to determine and analyzethe contribution of tributes to the wood production costs. Many tributes are due on the forest sector. In this study, the tributesconsidered are the ones falling on the production of forest on products and services (TMS, income tax on businessoperation (ITJP, social raw material, not including, therefore, those which are due on industrialization. They are: forestrate (FR, cadastrum and registration rate (CRR, chainsaw record rate (MRR, chainsaw ownership tax (MPT, landownership tax (RTT, commercialization tax contribution on profit (SCP, contribution for financing of social security(CFSS, Contribution for the National Institute of Social Security (CNISS, contribution for the social integration program(CSIP, rural syndicate contribution (RSH. The criterion utilized to determine economic rotation and to determine theoptimum moment to renew the stand was the Net Present Value (NPV, considering an infinite planning horizon. The resultsobtained allowed to identify the ratio of the tributes in the total wood production cost.. It was found that the optimumharvesting time, not considering the tributes, occurred at 7 years o age; considering all the tributes, the optimum age occurredat 8 years. By not considering tributes would cause to unduly anticipate the optimum harvesting age. The optimum momentto make the renewal of the stand, not considering the tributes, occurred at 21 years, after the third cutting. However,taking into account the tributes, it would occur at 32 years (after the fourth cutting. By not considering the effect oftributation would cause one to unduly antecipate the optimum time to renew the stand. Tributation stands for 37.78% ofwood production cost, i.e., taxes contribute with 3.8%, imposts with 25

  20. Social costs of loss in productivity-related absenteeism in Poland

    Directory of Open Access Journals (Sweden)

    Agnieszka Genowska

    2017-10-01

    Full Text Available Objectives: The aim of this study was to estimate indirect costs associated with losses in productivity due to sickness absence among registered workers in Poland. Material and Methods: Data on sick leave durations in 2013 was obtained from the Social Insurance Institution (SII (Zakład Ubezpieczeń Społecznych – ZUS. Based on the number of assumptions, this data was used for calculating absence durations. The costs of lost productivity were estimated on the basis of the measure of gross value added. Results: Estimated losses in productivity due to absenteeism in 2013 together accounted for 4.33% of gross domestic product (GDP (17.09 billion euro. In the female population, the total value of losses amounted to 9.66 billion euro, but excluding the costs of pregnancy, childbirth, and puerperium (2.96 billion euro, it was 6.7 billion euro. In the male population, the loss amounted to 7.43 billion euro. The highest overall costs of sickness absence based on age were found in the age group of 30–39 years (5.14 billion euro, including pregnancy, childbirth, and puerperium – 1.474 billion euro; respiratory diseases – 0.632 billion euro, injuries and poisonings – 0.62 billion euro. In the group of people aged > 40 years, the highest cost was generated by bone-muscular diseases (1.553 billion euro and injuries and poisoning (1.251 billion euro. Higher losses in the productivity of women in addition to pregnancy, childbirth, and puerperium were due to mental and behavioral disorders (0.71 billion euro, diseases of the genitourinary system (0.38 billion euro, and neoplasms (0.35 billion euro. At the same time, in men, compared to women, we observed higher losses due to injuries and poisoning (1.65 billion euro, and diseases of musculoskeletal (1.26 billion euro, nervous (0.79 billion euro, circulatory (0.65 billion euro, and digestive (0.41 billion euro systems. Conclusions: Improvement and further development of effective strategies for

  1. Social costs of loss in productivity-related absenteeism in Poland.

    Science.gov (United States)

    Genowska, Agnieszka; Fryc, Justyna; Pinkas, Jarosław; Jamiołkowski, Jacek; Szafraniec, Krystyna; Szpak, Andrzej; Bojar, Iwona

    2017-10-06

    The aim of this study was to estimate indirect costs associated with losses in productivity due to sickness absence among registered workers in Poland. Data on sick leave durations in 2013 was obtained from the Social Insurance Institution (SII) (Zakład Ubezpieczeń Społecznych - ZUS). Based on the number of assumptions, this data was used for calculating absence durations. The costs of lost productivity were estimated on the basis of the measure of gross value added. Estimated losses in productivity due to absenteeism in 2013 together accounted for 4.33% of gross domestic product (GDP) (17.09 billion euro). In the female population, the total value of losses amounted to 9.66 billion euro, but excluding the costs of pregnancy, childbirth, and puerperium (2.96 billion euro), it was 6.7 billion euro. In the male population, the loss amounted to 7.43 billion euro. The highest overall costs of sickness absence based on age were found in the age group of 30-39 years (5.14 billion euro, including pregnancy, childbirth, and puerperium - 1.474 billion euro; respiratory diseases - 0.632 billion euro, injuries and poisonings - 0.62 billion euro). In the group of people aged > 40 years, the highest cost was generated by bone-muscular diseases (1.553 billion euro) and injuries and poisoning (1.251 billion euro). Higher losses in the productivity of women in addition to pregnancy, childbirth, and puerperium were due to mental and behavioral disorders (0.71 billion euro), diseases of the genitourinary system (0.38 billion euro), and neoplasms (0.35 billion euro). At the same time, in men, compared to women, we observed higher losses due to injuries and poisoning (1.65 billion euro), and diseases of musculoskeletal (1.26 billion euro), nervous (0.79 billion euro), circulatory (0.65 billion euro), and digestive (0.41 billion euro) systems. Improvement and further development of effective strategies for prevention of complications of pregnancy and chronic diseases in the

  2. Product Costing in FMT: Comparing Deterministic and Stochastic Models Using Computer-Based Simulation for an Actual Case Study

    DEFF Research Database (Denmark)

    Nielsen, Steen

    2000-01-01

    This paper expands the traditional product costing technique be including a stochastic form in a complex production process for product costing. The stochastic phenomenon in flesbile manufacturing technologies is seen as an important phenomenon that companies try to decreas og eliminate. DFM has...... been used for evaluating the appropriateness of the firm's production capability. In this paper a simulation model is developed to analyze the relevant cost behaviour with respect to DFM and to develop a more streamlined process in the layout of the manufacturing process....

  3. Long-run effects of falling cellulosic ethanol production costs on the US agricultural economy

    International Nuclear Information System (INIS)

    Campiche, Jody L; Bryant, Henry L; Richardson, James W

    2010-01-01

    Renewable energy production has been expanding at a rapid pace. New advances in cellulosic ethanol technologies have the potential to displace the use of petroleum as a transportation fuel, and could have significant effects on both the agricultural economy and the environment. In this letter, the effects of falling cellulosic ethanol production costs on the mix of ethanol feedstocks employed and on the US agricultural economy are examined. Results indicate that, as expected, cellulosic ethanol production increases by a substantial amount as conversion technology improves. Corn production increases initially following the introduction of cellulosic technology, because producers enjoy new revenue from sales of corn stover. After cellulosic ethanol production becomes substantially cheaper, however, acres are shifted from corn production to all other agricultural commodities. Essentially, this new technology could facilitate the exploitation of a previously under-employed resource (corn stover), resulting in an improvement in overall welfare. In the most optimistic scenario considered, 68% of US ethanol is derived from cellulosic sources, coarse grain production is reduced by about 2%, and the prices of all food commodities are reduced modestly.

  4. A Low-Cost Production Method of FeSi2 Power Generation Thermoelectric Modules

    Science.gov (United States)

    Inoue, Hiroyuki; Kobayashi, Takahide; Kato, Masahiko; Yoneda, Seiji

    2016-03-01

    A method is proposed to reduce the production cost of power generation thermoelectric modules. FeSi2 is employed as the thermoelectric material because of its low cost, low environmental load, and oxidation resistance. The raw materials were prepared in the composition of Fe0.96Si2.1Co0.04 for n-type and Fe0.92Si2.1Mn0.08 for p-type, which were added with 0.5 wt.% Cu as the starting materials. They were sintered without pressure at 1446 K to be formed into elements. The Seebeck coefficient and resistivity at room temperature were determined to be -182 μV/K and 0.13 mΩm for n-type, and 338 μV/K and 1.13 mΩm for p-type, respectively. The brazing conditions of the direct joining between the element and the solder were examined. Pastes of BNi-6, BNi-7 or TB-608T were tried as the solder. TB-608T was useable for metallizing of insulation substrates and joining of thermoelectric elements in order to manufacture thermoelectric modules. The joining strength was determined to be 50 MPa between the alumina plate and the elements. No mechanical failure was observed in the modules after repetition of 10 or more exposures to a heat source of 670 K. No change was found in the internal resistance. The present production method will provide modules with high durability and low production cost, which will enable high-power multi-stage cascade modules at a reasonable cost.

  5. The costs of seasonality and expansion in Ireland’s milk production and processing

    Directory of Open Access Journals (Sweden)

    Heinschink K.

    2016-12-01

    Full Text Available Ireland’s milk production sector relies on grass-based spring-calving systems, which facilitates cost advantages in milk production but entails a high degree of supply seasonality. Among other implications, this supply seasonality involves extra costs in the processing sector including elevated plant capacities and varying levels of resource utilisation throughout the year. If both the national raw milk production increased substantially (e.g. post-milk quota and a high degree of seasonality persisted, extra processing capacities would be required to cope with peak supplies. Alternatively, existing capacities could be used more efficiently by distributing the milk volume more evenly during the year. In this analysis, an optimisation model was applied to analyse the costs and economies arising to an average Irish milk-processing business due to changes to the monthly distribution of milk deliveries and/or the total annual milk pool. Of the situations examined, changing from a seasonal supply prior to expansion to a smoother pattern combined with an increased milk pool emerged as the most beneficial option to the processor because both the processor’s gross surplus and the marginal producer milk price increased. In practice, it may however be the case that the extra costs arising to the producer from smoothing the milk intake distribution exceed the processor’s benefit. The interlinkages between the stages of the dairy supply chain mean that nationally, the seasonality trade-offs are complex and equivocal. Moreover, the prospective financial implications of such strategies will be dependent on the evolving and uncertain nature of international dairy markets in the post-quota environment.

  6. Tobacco BY-2 Media Component Optimization for a Cost-Efficient Recombinant Protein Production.

    Science.gov (United States)

    Häkkinen, Suvi T; Reuter, Lauri; Nuorti, Ninni; Joensuu, Jussi J; Rischer, Heiko; Ritala, Anneli

    2018-01-01

    Plant cells constitute an attractive platform for production of recombinant proteins as more and more animal-free products and processes are desired. One of the challenges in using plant cells as production hosts has been the costs deriving from expensive culture medium components. In this work, the aim was to optimize the levels of most expensive components in the nutrient medium without compromising the accumulation of biomass and recombinant protein yields. Wild-type BY-2 culture and transgenic tobacco BY-2 expressing green fluorescent protein-Hydrophobin I (GFP-HFBI) fusion protein were used to determine the most inexpensive medium composition. One particularly high-accumulating BY-2 clone, named 'Hulk,' produced 1.1 ± 0.2 g/l GFP-HFBI in suspension and kept its high performance during prolonged subculturing. In addition, both cultures were successfully cryopreserved enabling truly industrial application of this plant cell host. With the optimized culture medium, 43-55% cost reduction with regard to biomass and up to 69% reduction with regard to recombinant protein production was achieved.

  7. A cost prediction model for machine operation in multi-field production systems

    Directory of Open Access Journals (Sweden)

    Alessandro Sopegno

    Full Text Available ABSTRACT Capacity planning in agricultural field operations needs to give consideration to the operational system design which involves the selection and dimensioning of production components, such as machinery and equipment. Capacity planning models currently onstream are generally based on average norm data and not on specific farm data which may vary from year to year. In this paper a model is presented for predicting the cost of in-field and transport operations for multiple-field and multiple-crop production systems. A case study from a real production system is presented in order to demonstrate the model’s functionalities and its sensitivity to parameters known to be somewhat imprecise. It was shown that the proposed model can provide operation cost predictions for complex cropping systems where labor and machinery are shared between the various operations which can be individually formulated for each individual crop. By so doing, the model can be used as a decision support system at the strategic level of management of agricultural production systems and specifically for the mid-term design process of systems in terms of labor/machinery and crop selection conforming to the criterion of profitability.

  8. Preliminary design of a low-cost greenhouse for salt production in Indonesia

    Science.gov (United States)

    Jaziri, A. A.; Guntur; Setiawan, W.; Prihanto, A. A.; Kurniawan, A.

    2018-04-01

    Salt is an assential material of industry, not only in food industry point of view but also in various industries such as chemical, oil drilling, and animal feed industries, even less than half of salt needs used to household consumption. It is crucial to ensure salt production in Indonesia reaches the national target (3.7 million tons) due to relatively low technology and production level. Thus salt production technology is developed to facilitate farmers consisted of geomembrane and filtering-threaded technology. However, the use of those technologies in producing salt was proved less effective due to unpredictable weather conditions. Therefore, greenhouse technology is proposed to be used for salt production for several good reasons. This paper describes the preliminary design of a low-cost greenhouse designed as a pyramid model that uses bamboo, mono-layer and high density polyethylene plastics. The results confirmed that the yield of salt produced by greenhouse significantly incresed compared with prior technology and the NaCl content increased as well. The cost of greenhouse was IDR 5,688,000 and easy to assembly.

  9. Accurate costs of blood transfusion: a microcosting of administering blood products in the United Kingdom National Health Service.

    Science.gov (United States)

    Stokes, Elizabeth A; Wordsworth, Sarah; Staves, Julie; Mundy, Nicola; Skelly, Jane; Radford, Kelly; Stanworth, Simon J

    2018-04-01

    In an environment of limited health care resources, it is crucial for health care systems which provide blood transfusion to have accurate and comprehensive information on the costs of transfusion, incorporating not only the costs of blood products, but also their administration. Unfortunately, in many countries accurate costs for administering blood are not available. Our study aimed to generate comprehensive estimates of the costs of administering transfusions for the UK National Health Service. A detailed microcosting study was used to cost two key inputs into transfusion: transfusion laboratory and nursing inputs. For each input, data collection forms were developed to capture staff time, equipment, and consumables associated with each step in the transfusion process. Costing results were combined with costs of blood product wastage to calculate the cost per unit transfused, separately for different blood products. Data were collected in 2014/15 British pounds and converted to US dollars. A total of 438 data collection forms were completed by 74 staff. The cost of administering blood was $71 (£49) per unit for red blood cells, $84 (£58) for platelets, $55 (£38) for fresh-frozen plasma, and $72 (£49) for cryoprecipitate. Blood administration costs add substantially to the costs of the blood products themselves. These are frequently incurred costs; applying estimates to the blood components supplied to UK hospitals in 2015, the annual cost of blood administration, excluding blood products, exceeds $175 (£120) million. These results provide more accurate estimates of the total costs of transfusion than those previously available. © 2018 AABB.

  10. Analysis of the Production Cost for Various Grades of Biomass Thermal Treatment

    Energy Technology Data Exchange (ETDEWEB)

    Cherry, Robert S. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Wood, Rick A. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Westover, Tyler L. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2013-12-01

    Process flow sheets were developed for the thermal treatment of southern pine wood chips at four temperatures (150, 180, 230, and 270 degrees C) and two different scales (20 and 100 ton/hour). The larger capacity processes had as their primary heat source hot gas assumed to be available in quantity from an adjacent biorefinery. Mass and energy balances for these flow sheets were developed using Aspen Plus process simulation software. The hot gas demands in the larger processes, up to 1.9 million lb/hour, were of questionable feasibility because of the volume to be moved. This heat was of low utility because the torrefaction process, especially at higher temperatures, is a net heat producer if the organic byproduct gases are burned. A thermal treatment flow sheet using wood chips dried in the biorefinery to 10% moisture content (rather than 30% for green chips) with transfer of high temperature steam from the thermal treatment depot to the biorefinery was also examined. The equipment size information from all of these cases was used in several different equipment cost estimating methods to estimate the major equipment costs for each process. From these, factored estimates of other plant costs were determined, leading to estimates (± 30% accuracy) of total plant capital cost. The 20 ton/hour processes were close to 25 million dollars except for the 230 degrees C case using dried wood chips which was only 15 million dollars because of its small furnace. The larger processes ranged from 64-120 million dollars. From these capital costs and projections of several categories of operating costs, the processing cost of thermally treated pine chips was found to be $28-33 per ton depending on the degree of treatment and without any credits for steam generation. If the excess energy output of the two 20 ton/hr depot cases at 270 degrees C can be sold for $10 per million BTU, the net processing cost dropped to $13/ton product starting with green wood chips or only $3 per ton

  11. Reference costs for power generation; Couts de reference de la production electrique

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-12-01

    The first part of the 2003 study of reference costs for power generation has been completed. It was carried out by the General Directorate for Energy and Raw Materials (DGEMP) of the French Ministry of the Economy, Finance and Industry, with the collaboration of power-plant operators, construction firms and many other experts. A Review Committee of experts including economists (Forecasting Department, French Planning Office), qualified public figures, representatives of power-plant construction firms and operators, and non-governmental organization (NGO) experts, was consulted in the final phase. The study examines the costs of power generated by different methods (i.e. nuclear and fossil-fuel [gas-, coal-, and oil-fired] power plants) in the context of an industrial operation beginning in the year 2015. - The second part of the study relating to decentralized production methods (wind, photovoltaic, combined heat and power) is still in progress and will be presented at the beginning of next year. - 1. Study approach: The study is undertaken mainly from an investor's perspective and uses an 8% discount rate to evaluate the expenses and receipts from different years. In addition, the investment costs are considered explicitly in terms of interest during construction. - 2. Plant operating on a full-time basis (year-round): The following graph illustrates the main conclusions of the study for an effective operating period of 8000 hours. It can be seen that nuclear is more competitive than the other production methods for a year-round operation with an 8% discount rate applied to expenses. This competitiveness is even better if the costs related to greenhouse-gas (CO{sub 2}) emission are taken into account in estimating the MWh cost price. Integrating the costs resulting from CO{sub 2} emissions by non-nuclear fuels (gas, coal), which will be compulsory as of 2004 with the transposition of European directives, increases the total cost per MWh of these power generation

  12. Reference costs for power generation; Couts de reference de la production electrique

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-12-01

    The first part of the 2003 study of reference costs for power generation has been completed. It was carried out by the General Directorate for Energy and Raw Materials (DGEMP) of the French Ministry of the Economy, Finance and Industry, with the collaboration of power-plant operators, construction firms and many other experts. A Review Committee of experts including economists (Forecasting Department, French Planning Office), qualified public figures, representatives of power-plant construction firms and operators, and non-governmental organization (NGO) experts, was consulted in the final phase. The study examines the costs of power generated by different methods (i.e. nuclear and fossil-fuel [gas-, coal-, and oil-fired] power plants) in the context of an industrial operation beginning in the year 2015. - The second part of the study relating to decentralized production methods (wind, photovoltaic, combined heat and power) is still in progress and will be presented at the beginning of next year. - 1. Study approach: The study is undertaken mainly from an investor's perspective and uses an 8% discount rate to evaluate the expenses and receipts from different years. In addition, the investment costs are considered explicitly in terms of interest during construction. - 2. Plant operating on a full-time basis (year-round): The following graph illustrates the main conclusions of the study for an effective operating period of 8000 hours. It can be seen that nuclear is more competitive than the other production methods for a year-round operation with an 8% discount rate applied to expenses. This competitiveness is even better if the costs related to greenhouse-gas (CO{sub 2}) emission are taken into account in estimating the MWh cost price. Integrating the costs resulting from CO{sub 2} emissions by non-nuclear fuels (gas, coal), which will be compulsory as of 2004 with the transposition of European directives, increases the total cost per MWh of these power

  13. Impacts of reserve methodology on production cost in high-penetration renewable scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Brinkman, G.; Lew, D.; Hummon, M.; Ibanez, E.; Ela, E.; Hodge, B.M. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2012-07-01

    Prior to wind and solar penetration, electric power systems were designed to handle variability in system load, uncertainty in load forecasts, and contingency events. Frequency regulations reserve typically handles high frequency (less than 5-minute time scale) variability. Contingency reserves supply energy in the case of the loss of a generator or transmission line. Wind and solar photovoltaic generation and variability to electric power system generation that must be balanced by the system operator. New ancillary service products may be necessary to minimize the cost of integrating these variable renewable generators. For example, California ISO is studying incorporating a flexible ramping product to ensure sufficient ramping capability. A flexibility reserve product could help ensure that sufficient capacity is online to handle unexpected variability in wind and solar generation. (orig.)

  14. Minimization of Delay Costs in the Realization of Production Orders in Two-Machine System

    Science.gov (United States)

    Dylewski, Robert; Jardzioch, Andrzej; Dworak, Oliver

    2018-03-01

    The article presents a new algorithm that enables the allocation of the optimal scheduling of the production orders in the two-machine system based on the minimum cost of order delays. The formulated algorithm uses the method of branch and bounds and it is a particular generalisation of the algorithm enabling for the determination of the sequence of the production orders with the minimal sum of the delays. In order to illustrate the proposed algorithm in the best way, the article contains examples accompanied by the graphical trees of solutions. The research analysing the utility of the said algorithm was conducted. The achieved results proved the usefulness of the proposed algorithm when applied to scheduling of orders. The formulated algorithm was implemented in the Matlab programme. In addition, the studies for different sets of production orders were conducted.

  15. Productivity and Cost Analysis of Forest Harvesting Operation in Matang Mangrove Forest, Perak, Malaysia

    Directory of Open Access Journals (Sweden)

    Albert Empawi Tindit

    2017-04-01

    Full Text Available Matang Mangrove Forest is under systematic management since 1902 and still considered as the best managed mangrove forest in the world. This research was conducted to measure the time and productivity of forest harvesting operation and also to analyze the cost and revenue of mangrove forest harvesting operation at Matang mangrove forest. This project had been carried out in cooperation with Seri Sepetang Enterprise, one of the harvesting licenses in Kuala Sepetang, Perak. Data collections were taken in every station starting from standing tree until to the Kiln-Drying jetty. The data then calculated by using the formulas of productivity and cost analysis. As the result, the productivity for felling, bucking and debarking, the manual skidding using wheel-barrow and the water transportation are 1.84 tan/hour, 3.82 tan/hour and 4.64 tan/hour respectively. The cost for each operation of 9 tan log volume for felling, bucking and debarking, the manual skidding using wheel-barrow and the water transportation are RM 56.88, RM 10.80 and RM 36.72 respectively. As the revenue, the company paid RM 260 per 9 tan of log for the in-forest operation (felling, manual skidding and loading to the ship and pay RM 80 per 9 tan for the water transportation, and they gained the net profit of RM 192.32 and RM 43.28 respectively. The average of forest harvesting operation is twice operation in a day (equal with 2 x 9-ton volume of log production a day, so they will gain a double profit. In conclusion, the forest harvesting operation is sustainably managed for supplying the raw material of charcoal industries in Matang mangrove forest. Since, they work manually and spend much energy in this forest harvesting operation, so for further study it recommends to conduct the ergonomics evaluation during forest harvesting operation at Matang Mangrove Forest.

  16. Improvement Strategies, Cost Effective Production, and Potential Applications of Fungal Glucose Oxidase (GOD: Current Updates

    Directory of Open Access Journals (Sweden)

    Manish K. Dubey

    2017-06-01

    Full Text Available Fungal glucose oxidase (GOD is widely employed in the different sectors of food industries for use in baking products, dry egg powder, beverages, and gluconic acid production. GOD also has several other novel applications in chemical, pharmaceutical, textile, and other biotechnological industries. The electrochemical suitability of GOD catalyzed reactions has enabled its successful use in bioelectronic devices, particularly biofuel cells, and biosensors. Other crucial aspects of GOD such as improved feeding efficiency in response to GOD supplemental diet, roles in antimicrobial activities, and enhancing pathogen defense response, thereby providing induced resistance in plants have also been reported. Moreover, the medical science, another emerging branch where GOD was recently reported to induce several apoptosis characteristics as well as cellular senescence by downregulating Klotho gene expression. These widespread applications of GOD have led to increased demand for more extensive research to improve its production, characterization, and enhanced stability to enable long term usages. Currently, GOD is mainly produced and purified from Aspergillus niger and Penicillium species, but the yield is relatively low and the purification process is troublesome. It is practical to build an excellent GOD-producing strain. Therefore, the present review describes innovative methods of enhancing fungal GOD production by using genetic and non-genetic approaches in-depth along with purification techniques. The review also highlights current research progress in the cost effective production of GOD, including key advances, potential applications and limitations. Therefore, there is an extensive need to commercialize these processes by developing and optimizing novel strategies for cost effective GOD production.

  17. The cost of electricity production from nuclear energy in the Netherlands

    International Nuclear Information System (INIS)

    1982-01-01

    This report is an updated version of the report ''The costs of nuclear power in the Netherlands'' published in 1978. The calculations are based on light water reactors and, as required, more specifically on a boiling water reactor. In Chapter 2 the following components of the total costs are considered: i) investment and associated factors, ii) operation and further exploitation, iii) the fission-cycle. This last item includes the costs of the uranium ore, the enrichment, the manufacture of the fission elements, the use of the reactor and the reprocessing and storage of the waste products. The starting points for all these costs, the factors which affect them and the variations and/or uncertainties associated with them are given. Based on this argumentation, Chapter 3 presents the results of the calculations in Dutch cents per kWh for a ficticious nuclear power plant that commenced operation on 1st January 1982. Two reactor models are used operating at 930 and 600 MWe respectively. (C.F.)

  18. Understanding product cost vs. performance through an in-depth system Monte Carlo analysis

    Science.gov (United States)

    Sanson, Mark C.

    2017-08-01

    The manner in which an optical system is toleranced and compensated greatly affects the cost to build it. By having a detailed understanding of different tolerance and compensation methods, the end user can decide on the balance of cost and performance. A detailed phased approach Monte Carlo analysis can be used to demonstrate the tradeoffs between cost and performance. In complex high performance optical systems, performance is fine-tuned by making adjustments to the optical systems after they are initially built. This process enables the overall best system performance, without the need for fabricating components to stringent tolerance levels that often can be outside of a fabricator's manufacturing capabilities. A good performance simulation of as built performance can interrogate different steps of the fabrication and build process. Such a simulation may aid the evaluation of whether the measured parameters are within the acceptable range of system performance at that stage of the build process. Finding errors before an optical system progresses further into the build process saves both time and money. Having the appropriate tolerances and compensation strategy tied to a specific performance level will optimize the overall product cost.

  19. Cost-effectiveness analysis of algae energy production in the EU

    International Nuclear Information System (INIS)

    Kovacevic, Vujadin; Wesseler, Justus

    2010-01-01

    Today's society relies heavily on fossil fuels as a main energy source. Global energy demand increase, energy security and climate change are the main drivers of the transition towards alternative energy sources. This paper analyses algal biodiesel production for the EU road transportation and compares it to the fossil fuels and 1st generation biofuels. A cost-effectiveness analysis was used to aggregate private and external costs and derive the social cost of each fuel. The following externalities were internalized: emissions (GHG and non-GHG), food prices impact, pesticides/fertilizers use and security of supply. Currently the social cost of producing algal biodiesel at 52.3 EUR GJ -1 is higher than rapeseed biodiesel (36.0 EUR GJ -1 ) and fossil fuels (15.8 EUR GJ -1 ). Biotechnology development, high crude oil prices and high carbon value are the key features of the scenario where algal biodiesel outcompetes all other fuels. A substantial investment into the biotechnology sector and comprehensive environmental research and policy are required to make that scenario a reality. (author)

  20. SEA-MAP: A cost effective method for production from deepwater reservoirs

    International Nuclear Information System (INIS)

    Wybro, P.G.; Chaisson, M.

    1994-01-01

    SEA Engineering Marginal field Autonomous Production (SEAMAP) based on a small tension leg platform is a concept for commercially viable production from deepwater reservoirs. Considerable engineering effort has and is still being made to find ways of commercially developing the deepwater Gulf of Mexico reserves. The limited number of actual deepwater developments would appear to indicate the energy industry at present remains reluctant to proceed with the development of many of the known discoveries. The major deterrents have been the major investment required in order to implement the development plans combined with uncertainties regarding reservoir performance. Mindful of this situation, SEA-MAP evolved from a perceived need for a low cost deepwater production system viable for relatively small reserves. The capital risk exposure is more sustainable and the major part of the facilities can be relocated to another site. Conversely, field production can be increased at a later stage with additional SEA-MAP platforms SEA-MAP offers a potential means, with minimum capital expenditure, of initiating production autonomously from a deepwater field, obtaining reservoir data and thereafter producing and performing workover activities during the field life. After producing from the field for a period, it may be determined that additional wells are needed. Such a situation leads into a logical phased development comprising more than one small platform or the relocation of an existing structure. Deepwater development can thus be approached cautiously, with minimized capital risk, minimal start-up investment and subsequent self-financing phased production

  1. LOW COST METHODOLOGIES TO ANALYZE AND CORRECT ABNORMAL PRODUCTION DECLINE IN STRIPPER GAS WELLS

    International Nuclear Information System (INIS)

    Jerry James; Gene Huck; Tim Knobloch

    2001-01-01

    A study group of 376 Clinton Sand wells in Ohio provided data to determine the historic frequency of the problem of abnormal production declines in stripper gas wells and the causes of the abnormal production decline. Analysis of the historic frequency of the problem indicates over 70% of the wells experienced abnormal production decline. The most frequently occurring causes of abnormal production declines were determined to be fluid accumulation (46%), gas gathering restrictions (24%), and mechanical failures (23%). Data collection forms and decision trees were developed to cost-effectively diagnose the abnormal production declines and suggest corrective action. The decision trees and data collection sheets were incorporated into a procedure guide to provide stripper gas well operators with a methodology to analyze and correct abnormal production declines. The systematic methodologies and techniques developed should increase the efficiency of problem well assessment and implementation of solutions for stripper gas wells. This eight quarterly technical progress report provides a summary of the deliverables completed to date, including the results of the remediations, the procedure guide, and the technology transfer. Due to the successful results of the study to date and the efficiency of the methodology development, two to three additional wells will be selected for remediation for inclusion into the study. The results of the additional remediations will be included in the final report

  2. The social costs of production and the structure of technology in the Brazilian ethanol industry: A cost-benefit analysis and an infant industry evaluation, 1978-1987

    International Nuclear Information System (INIS)

    Rask, K.N.

    1991-01-01

    Only one country, Brazil, has developed an economy-wide liquid fuel industry which directly substitutes for gasoline. The experience of sugar-cane-based ethanol production in Brazil provides an important case study in the economic efficiency of this petroleum substitute. Partial equilibrium cost-benefit analysis is used to evaluate the net social benefits of ethanol production over the decade beginning in 1978. Ethanol production from the southern region of Brazil is found to be an economically efficient substitute for petroleum when world oil prices are over $20 per barrel. Ethanol production in the northern Brazil has never been economic and will not be until oil prices rise above $40 per barrel. The second half of this thesis uses applied production analysis to determine the source of the ethanol unit cost reductions. For sugar-cane production, a modified symmetric generalized McFadden cost function which includes fixed factors of production is estimated. There is little evidence of technical progress and no evidence of increasing returns to scale in sugar-cane production

  3. The influence of lunar propellant production on the cost-effectiveness of cislunar transportation systems

    Science.gov (United States)

    Koelle, H. H.

    1992-01-01

    It is well known that propellants produced at the points of destination such as the Moon or Mars will help the economy of space transportation, particularly if round trips with a crew are involved. The construction and operation of a lunar base shortly after the turn of the century is one of the space programs under serious consideration at the present time. Space transportation is one of the major cost drivers. With present technology, if expendable launchers were employed, the specific transportation costs of one-way cargo flights would be approximately 10,000 dollars/kg (1985) at life-cycle cumulative 100,000 ton payload to the lunar surface. A fully reusable space transportation system using lunar oxygen and Earth-produced liquid hydrogen (LH2) would reduce the specific transportation costs by one order of magnitude to less than 1000 dollars/kg at the same payload volume. Another case of primary interest is the delivery of construction material and consumables from the lunar surface to the assembly site of space solar power plants in geostationary orbit (GEO). If such a system were technically and economically feasible, a cumulative payload of about 1 million tons or more would be required. At this level a space freighter system could deliver this material from Earth for about 300 dollars/kg (1985) to GEO. A lunar space transportation system using lunar oxygen and a fuel mixture of 50 percent Al and 50 percent LH2 (that has to come from Earth) could reduce the specific transportation costs to less than half, approximately 150 dollars/kg. If only lunar oxygen were available, these costs would come down to 200 dollars/kg. This analysis indicates a sizable reduction of the transportation burden on this type of mission. It should not be overlooked, however, that there are several uncertainties in such calculations. It is quite difficult at this point to calculate the cost of lunar-produced O and/or Al. This will be a function of production rate and life

  4. Cost-effective production of biogas from manure – retrogas project

    DEFF Research Database (Denmark)

    Jurado, Esperanza; Gavala, Hariklia N.; Rohold, Lars

    2010-01-01

    , this is the main reason for the poor economic performance of biogas plants in Denmark. The idea of increasing the methane productivity of the manure has triggered the development of new separation technologies for being applied before the anaerobic digestion of the swine manure. Thus, the solid and liquid...... at the development of new separation and liquefaction technology in order to make the anaerobic digestion of swine manure cost efficient and viable.......Transport of large quantities of low concentrated swine manure (total solids around 5-7%) to biogas plants represents a significant proportion of the operating costs for co-digestion plants. Together with the increment of the prices of the industrial effluents that are used for codigestion...

  5. The value of windpower: An investigation using a qualified production cost model

    International Nuclear Information System (INIS)

    Milligan, M.R.; Miller, A.H.

    1993-07-01

    As part of the US Department of Energy's Wind Energy Program at the National Renewable Energy Laboratory, we are using the Environmental Defense Fund's Electric Utility Financial ampersand Production Cost Model (Elfin) as a tool to determine the value of wind energy to specific utilities. The cases we have developed exercise a number of options in the way in which wind energy is treated: (1) as a load modifer (negative load); (2) as a quick-start supply-side resource with hourly varying output; and (3) probabilistically, using time-varying Weibull distributions. By using two wind speed distributions, two different wind turbines, and two different utilities, we show what the wind turbine cost/kW might be that results in a positive value of wind energy for these utilities

  6. THE ROLE OF TIPPING IN REDUCING LABOUR COSTS: CASE OF SECTOR RETAIL PETROLEUM PRODUCTS

    Directory of Open Access Journals (Sweden)

    Andrej Raspor

    2014-05-01

    Full Text Available The purpose of this paper was to determine whether tipping could reduce labour costs in the petroleum products retail sector. The research we present was designed on the basis of survey results gathered from Slovenian petrol stations in 2009 and 2010. We have identified the following factors in the tipping process: job satisfaction, flexibility, service quality, satisfaction, motivation and the factor of receiving tips. The analysis showed correlation between methods used to increase the value of tips and better service quality, increased financial and numerical flexibility, motivation, satisfaction upon receipt of tips and the method used to increase the value of tips. In order to decrease labour costs we propose that the management take control of tipping and integrates tips into the reward system. Also, the employees should be made aware about how tipping improves service and increases their income.

  7. Production of synthetic methanol from air and water using controlled thermonuclear reactor power. 2. Capital investment and production costs

    Energy Technology Data Exchange (ETDEWEB)

    Dang, V D; Steinberg, M [Brookhaven National Lab., Upton, N.Y. (USA)

    1977-01-01

    Energy requirement and process development of methanol production from air and water using controlled thermonuclear fusion power was discussed in Part 1 (Steinberg et al., Energy conversion;17:97(1977)). This second part presents an economic analysis of the nine processes presented for obtaining carbon dioxide recovery from the atmosphere or the sea for methanol production. It is found that the most economical process of obtaining carbon dioxide is by stripping from sea water. The process of absorption/stripping by dilute potassium carbonate solution is found to be the most economical for the extraction of carbon dioxide from air at atmospheric pressure. The total energy required for methanol synthesis from these sources of carbon dioxide is 3.90 kWh(e)/lb methanol of which 90% is used for generation of hydrogen. The process which consumes the greatest amount of energy is the absorption/stripping of air by water at high pressure and amounts to 13.2 kWh(e)/lb methanol. With nuclear fusion power plants of 1000to 9000 MW(e), it is found that the cost of methanol using the extraction of carbon dioxide from air with dilute potassium carbonate solution is estimated to be in the range between Pound1.73 and Pound2.90/MMB.t.u. (energy equivalent - 1974 cost) for plant capacities of 21 400 to 193 000 bbl/day methanol. This methanol cost is competitive with gasoline in the range of 19 approximately equal to 33c/gallon. For the process of stripping of carbon dioxide from sea water, the cost is found to lie in the range of Pound1.65 to Pound2.71/MMB.t.u. (energy equivalent) for plant capacities of 21 700 to 195 000 bbl/day methanol which is competitive with gasoline in the range of 18 approximately equal to 30 c/gallon. Projection of methanol demand in the year 2020 is presented based on both its conventional use as chemicals and as a liquid fuel substituting for oil and gas.

  8. Caregiver burden, productivity loss, and indirect costs associated with caring for patients with poststroke spasticity

    Science.gov (United States)

    Ganapathy, Vaidyanathan; Graham, Glenn D; DiBonaventura, Marco D; Gillard, Patrick J; Goren, Amir; Zorowitz, Richard D

    2015-01-01

    Objective Many stroke survivors experience poststroke spasticity and the related inability to perform basic activities, which necessitates patient management and treatment, and exerts a considerable burden on the informal caregiver. The current study aims to estimate burden, productivity loss, and indirect costs for caregivers of stroke survivors with spasticity. Methods Internet survey data were collected from 153 caregivers of stroke survivors with spasticity including caregiving time and difficulty (Oberst Caregiver Burden Scale), Work Productivity and Activity Impairment measures, and caregiver and patient characteristics. Fractional logit models examined predictors of work-related restriction, and work losses were monetized (2012 median US wages). Results Mean Oberst Caregiver Burden Scale time and difficulty scores were 46.1 and 32.4, respectively. Employed caregivers (n=71) had overall work restriction (32%), absenteeism (9%), and presenteeism (27%). Caregiver characteristics, lack of nursing home coverage, and stroke survivors’ disability predicted all work restriction outcomes. The mean total lost-productivity cost per employed caregiver was US$835 per month (>$10,000 per year; 72% attributable to presenteeism). Conclusion These findings demonstrate the substantial burden of caring for stroke survivors with spasticity illustrating the societal and economic impact of stroke that extends beyond the stroke survivor. PMID:26609225

  9. Mathematical supply-chain modelling: Product analysis of cost and time

    International Nuclear Information System (INIS)

    Easters, D J

    2014-01-01

    Establishing a mathematical supply-chain model is a proposition that has received attention due to its inherent benefits of evolving global supply-chain efficiencies. This paper discusses the prevailing relationships found within apparel supply-chain environments, and contemplates the complex issues indicated for constituting a mathematical model. Principal results identified within the data suggest, that the multifarious nature of global supply-chain activities require a degree of simplification in order to fully dilate the necessary factors which affect, each sub-section of the chain. Subsequently, the research findings allowed the division of supply-chain components into sub-sections, which amassed a coherent method of product development activity. Concurrently, the supply-chain model was found to allow systematic mathematical formulae analysis, of cost and time, within the multiple contexts of each subsection encountered. The paper indicates the supply-chain model structure, the mathematics, and considers how product analysis of cost and time can improve the comprehension of product lifecycle management

  10. Efficiency and cost advantages of an advanced-technology nuclear electrolytic hydrogen-energy production facility

    Science.gov (United States)

    Donakowski, T. D.; Escher, W. J. D.; Gregory, D. P.

    1977-01-01

    The concept of an advanced-technology (viz., 1985 technology) nuclear-electrolytic water electrolysis facility was assessed for hydrogen production cost and efficiency expectations. The facility integrates (1) a high-temperature gas-cooled nuclear reactor (HTGR) operating a binary work cycle, (2) direct-current (d-c) electricity generation via acyclic generators, and (3) high-current-density, high-pressure electrolyzers using a solid polymer electrolyte (SPE). All subsystems are close-coupled and optimally interfaced for hydrogen production alone (i.e., without separate production of electrical power). Pipeline-pressure hydrogen and oxygen are produced at 6900 kPa (1000 psi). We found that this advanced facility would produce hydrogen at costs that were approximately half those associated with contemporary-technology nuclear electrolysis: $5.36 versus $10.86/million Btu, respectively. The nuclear-heat-to-hydrogen-energy conversion efficiency for the advanced system was estimated as 43%, versus 25% for the contemporary system.

  11. Project Minerva: A low cost manned Mars mission based on indigenous propellant production

    Science.gov (United States)

    Beder, David; Bryan, Richard; Bui, Tuyen; Caviezel, Kelly; Cinnamon, Mark; Daggert, Todd; Folkers, Mike; Fornia, Mark; Hanks, Natasha; Hamilton, Steve

    1992-01-01

    Project Minerva is a low-cost manned Mars mission designed to deliver a crew of four to the Martian surface using only two sets of two launches from the Kennedy Space Center. Key concepts which make this mission realizable are the use of near-term technologies and in-situ propellant production, following the scenario originally proposed by R. Zubrin. The first set of launches delivers two unmanned payloads into low Earth orbit (LEO): the first payload consists of an Earth Return Vehicle (ERV), a propellant production plant, and a set of robotic vehicles; the second payload consists of the trans-Mars injection (TMI) upper stage. In LEO, the two payloads are docked and the configuration is injected into a Mars transfer orbit. The landing on Mars is performed with the aid of multiple aerobraking maneuvers. On the Martian surface, the propellant production plant uses a Sabatier/electrolysis type process to combine nine tons of hydrogen with carbon dioxide from the Martian atmosphere to produce over a hundred tons of liquid oxygen and liquid methane, which are later used as the propellants for the rover expeditions and the manned return journey of the ERV. The systems necessary for the flights to and from Mars, as well as those needed for the stay on Mars, are discussed. These systems include the transfer vehicle design, life support, guidance and communications, rovers and telepresence, power generation, and propellant manufacturing. Also included are the orbital mechanics, the scientific goals, and the estimated mission costs.

  12. Mathematical supply-chain modelling: Product analysis of cost and time

    Science.gov (United States)

    Easters, D. J.

    2014-03-01

    Establishing a mathematical supply-chain model is a proposition that has received attention due to its inherent benefits of evolving global supply-chain efficiencies. This paper discusses the prevailing relationships found within apparel supply-chain environments, and contemplates the complex issues indicated for constituting a mathematical model. Principal results identified within the data suggest, that the multifarious nature of global supply-chain activities require a degree of simplification in order to fully dilate the necessary factors which affect, each sub-section of the chain. Subsequently, the research findings allowed the division of supply-chain components into sub-sections, which amassed a coherent method of product development activity. Concurrently, the supply-chain model was found to allow systematic mathematical formulae analysis, of cost and time, within the multiple contexts of each subsection encountered. The paper indicates the supply-chain model structure, the mathematics, and considers how product analysis of cost and time can improve the comprehension of product lifecycle management.

  13. The Integration of Production-Distribution on Newspapers Supply Chain for Cost Minimization using Analytic Models: Case Study

    Science.gov (United States)

    Febriana Aqidawati, Era; Sutopo, Wahyudi; Hisjam, Muh.

    2018-03-01

    Newspapers are products with special characteristics which are perishable, have a shorter range of time between the production and distribution, zero inventory, and decreasing sales value along with increasing in time. Generally, the problem of production and distribution in the paper supply chain is the integration of production planning and distribution to minimize the total cost. The approach used in this article to solve the problem is using an analytical model. In this article, several parameters and constraints have been considered in the calculation of the total cost of the integration of production and distribution of newspapers during the determined time horizon. This model can be used by production and marketing managers as decision support in determining the optimal quantity of production and distribution in order to obtain minimum cost so that company's competitiveness level can be increased.

  14. Production of biodegradable plastic by polyhydroxybutyrate (PHB) accumulating bacteria using low cost agricultural waste material.

    Science.gov (United States)

    Getachew, Anteneh; Woldesenbet, Fantahun

    2016-12-12

    Polyhydroxybutyrates (PHBs) are macromolecules synthesized by bacteria. They are inclusion bodies accumulated as reserve materials when the bacteria grow under different stress conditions. Because of their fast degradability under natural environmental conditions, PHBs are selected as alternatives for production of biodegradable plastics. The aim of this work was to isolate potential PHB producing bacteria, evaluate PHB production using agro-residues as carbon sources. Among fifty bacterial strains isolated from different localities, ten PHB accumulating strains were selected and compared for their ability to accumulate PHB granules inside their cells. Isolate Arba Minch Waste Water (AWW) identified as Bacillus spp was found to be the best producer. The optimum pH, temperature, and incubation period for best PHB production by the isolate were 7, 37 °C, and 48 h respectively at 150 rpm. PHB production was best with glucose as carbon source and peptone as nitrogen source. The strain was able to accumulate 55.6, 51.6, 37.4 and 25% PHB when pretreated sugar cane bagasse, corn cob, teff straw (Eragrostis tef) and banana peel were used as carbon sources respectively. Fourier transform-infrared authentication results of the extracted and purified PHB identified its functional units as C-H, CH 2 , C=O and C-O groups. UV-Vis spectrophotometric analysis and biodegradability test confirmed the similarity of the extract with standard PHB and its suitability for bioplastic production. The isolated Bacillus sp can be used for feasible production of PHB using agro-residues especially sugarcane bagasse which can reduce the production cost in addition to reducing the disposal problem of these substrates. The yield of PHB can further be boosted by optimization of production parameters as substrates.

  15. Development of analysis method of material f low cost accounting using lean technique in food production: A case study of Universal Food Public (UFC Co.,Ltd.

    Directory of Open Access Journals (Sweden)

    Wichai Chattinnawat

    2015-06-01

    Full Text Available This research aims to apply Lean technique in conjunction with analysis of Material Flow Cost Accounting (MFCA to production process of canned sweet corn in order to increase process efficiency, eliminate waste and reduce cost of the production. This research develops and presents new type of MFCA analysis by incorporating value and non-value added activities into the MFCA cost allocation process. According to the simulation-based measurement of the process efficiency, integrated cost allocation based on activity types results in higher proportion of negative product cost in comparison to that computed from conventional MFCA cost allocation. Thus, considering types of activities and process efficiency have great impacts on cost structure especially for the negative product cost. The research leads to solutions to improve work procedures, eliminate waste and reduce production cost. The overall cost per unit decreases with higher proportion of positive product cost.

  16. Measuring the societal burden of cancer: the cost of lost productivity due to premature cancer-related mortality in Europe.

    Science.gov (United States)

    Hanly, Paul; Soerjomataram, Isabelle; Sharp, Linda

    2015-02-15

    Every cancer-related death in someone of working age represents an economic loss to society. To inform priorities for cancer control, we estimated costs of lost productivity due to premature cancer-related mortality across Europe, for all cancers and by site, gender, region and country. Cancer deaths in 2008 were obtained from GLOBOCAN for 30 European countries across four regions. Costs were valued using the human capital approach. Years of productive life lost (YPLL) were computed by multiplying deaths between 15 and 64 years by working-life expectancy, then by country-, age- and gender-specific annual wages, corrected for workforce participation and unemployment. Lost productivity costs due to premature cancer-related mortality in Europe in 2008 were €75 billion. Male costs (€49 billion) were almost twice female costs (€26 billion). The most costly sites were lung (€17 billion; 23% of total costs), breast (€7 billion; 9%) and colorectum (€6 billion; 8%). Stomach cancer (in Southern and Central-Eastern Europe) and pancreatic cancer (in Northern and Western Europe) were also among the most costly sites. The average lost productivity cost per cancer death was €219,241. Melanoma had the highest cost per death (€312,798), followed by Hodgkin disease (€306,628) and brain and CNS cancer (€288,850). Premature mortality costs were 0.58% of 2008 European gross domestic product, highest in Central-Eastern Europe (0.81%) and lowest in Northern Europe (0.51%). Premature cancer-related mortality costs in Europe are significant. These results provide a novel perspective on the societal cancer burden and may be used to inform priority setting for cancer control. © 2014 UICC.

  17. Evaluation of Costs in Asparagus Production in Relation to Different Technological Processes in Conditions of Slovak Republic

    Directory of Open Access Journals (Sweden)

    Patrik Burg

    2014-01-01

    Full Text Available This study deals with analysis structure of cost on the production of asparagus in relation to three different technological processes in conditions of Slovak Republic. Obtained results can be used as a template to prepare budgets and make production decisions to estimate potential returns and to analyze investment and financial analysis decisions in the asparagus cultivation. Production practices used in the budget are based on typical practices for asparagus in this country. From the analysis of the cost structure of assessed variants different technological procedures follows that the largest share of the costs fall to purchased material and labor.

  18. Product platform considerations on a project that develops sustainable low-cost housing for townships

    DEFF Research Database (Denmark)

    Wörösch, Michael; Bonev, Martin; Mortensen, Niels Henrik

    Construction companies in Denmark are often working with profit margins as little as 1-3% in situations where they deliver high-end buildings to the local market. Even though customers are willing to pay a premium price for high quality, construction companies earn very little on their products...... their new owners the possibility to take a loan in their building which is expected to contribute to more businesses being started up and thereby strengthening the domestic economy. As a consequence of this, additional research is needed in how to further optimize the economy of sustainable low-cost housing...

  19. The Optimal Pricing of Computer Software and Other Products with High Switching Costs

    OpenAIRE

    Pekka Ahtiala

    2004-01-01

    The paper studies the determinants of the optimum prices of computer programs and their upgrades. It is based on the notion that because of the human capital invested in the use of a computer program by its user, this product has high switching costs, and on the finding that pirates are responsible for generating over 80 per cent of new software sales. A model to maximize the present value of the program to the program house is constructed to determine the optimal prices of initial programs a...

  20. Pilot production system cost/benefit analysis: Digital document storage project

    Science.gov (United States)

    1989-01-01

    The Digital Document Storage (DDS)/Pilot Production System (PPS) will provide cost effective electronic document storage, retrieval, hard copy reproduction, and remote access for users of NASA Technical Reports. The DDS/PPS will result in major benefits, such as improved document reproduction quality within a shorter time frame than is currently possible. In addition, the DDS/PPS will provide an important strategic value through the construction of a digital document archive. It is highly recommended that NASA proceed with the DDS Prototype System and a rapid prototyping development methodology in order to validate recent working assumptions upon which the success of the DDS/PPS is dependent.

  1. A productivity and cost comparison of two systems for producing biomass fuel from roadside forest treatment residues

    Science.gov (United States)

    Nathaniel Anderson; Woodam Chung; Dan Loeffler; John Greg Jones

    2012-01-01

    Forest operations generate large quantities of forest biomass residues that can be used for production of bioenergy and bioproducts. However, a significant portion of recoverable residues are inaccessible to large chip vans, making use financially infeasible. New production systems must be developed to increase productivity and reduce costs to facilitate use of these...

  2. Harvesting costs and production rates for seed-tree removal in young-growth, mixed-conifer stands

    Science.gov (United States)

    Philip M. McDonald

    1969-01-01

    Ponderosa pine seed trees left from a previous cutting on the Challenge Experimental Forest, California, were removed in October 1963. Logging costs and production rates were compared with those for a seed-tree cutting on an area nearby. Production rates for seed-tree removal greatly exceeded those for the operation as a whole. Skidding production increased by 38...

  3. A cost analysis of microalgal biomass and biodiesel production in open raceways treating municipal wastewater and under optimum light wavelength.

    Science.gov (United States)

    Kang, Zion; Kim, Byung-Hyuk; Ramanan, Rishiram; Choi, Jong-Eun; Yang, Ji-Won; Oh, Hee-Mock; Kim, Hee-Sik

    2015-01-01

    Open raceway ponds are cost-efficient for mass cultivation of microalgae compared with photobioreactors. Although low-cost options like wastewater as nutrient source is studied to overcome the commercialization threshold for biodiesel production from microalgae, a cost analysis on the use of wastewater and other incremental increases in productivity has not been elucidated. We determined the effect of using wastewater and wavelength filters on microalgal productivity. Experimental results were then fitted into a model, and cost analysis was performed in comparison with control raceways. Three different microalgal strains, Chlorella vulgaris AG10032, Chlorella sp. JK2, and Scenedesmus sp. JK10, were tested for nutrient removal under different light wavelengths (blue, green, red, and white) using filters in batch cultivation. Blue wavelength showed an average of 27% higher nutrient removal and at least 42% higher chemical oxygen demand removal compared with white light. Naturally, the specific growth rate of microalgae cultivated under blue wavelength was on average 10.8% higher than white wavelength. Similarly, lipid productivity was highest in blue wavelength, at least 46.8% higher than white wavelength, whereas FAME composition revealed a mild increase in oleic and palmitic acid levels. Cost analysis reveals that raceways treating wastewater and using monochromatic wavelength would decrease costs from 2.71 to 0.73 $/kg biomass. We prove that increasing both biomass and lipid productivity is possible through cost-effective approaches, thereby accelerating the commercialization of low-value products from microalgae, like biodiesel.

  4. No apparent costs for facultative antibiotic production by the soil bacterium Pseudomonas fluorescens Pf0-1.

    Science.gov (United States)

    Garbeva, Paolina; Tyc, Olaf; Remus-Emsermann, Mitja N P; van der Wal, Annemieke; Vos, Michiel; Silby, Mark; de Boer, Wietse

    2011-01-01

    Many soil-inhabiting bacteria are known to produce secondary metabolites that can suppress microorganisms competing for the same resources. The production of antimicrobial compounds is expected to incur fitness costs for the producing bacteria. Such costs form the basis for models on the co-existence of antibiotic-producing and non-antibiotic producing strains. However, so far studies quantifying the costs of antibiotic production by bacteria are scarce. The current study reports on possible costs, for antibiotic production by Pseudomonas fluorescens Pf0-1, a soil bacterium that is induced to produce a broad-spectrum antibiotic when it is confronted with non-related bacterial competitors or supernatants of their cultures. We measured the possible cost of antibiotic production for Pseudomonas fluorescens Pf0-1 by monitoring changes in growth rate with and without induction of antibiotic production by supernatant of a bacterial competitor, namely Pedobacter sp.. Experiments were performed in liquid as well as on semi-solid media under nutrient-limited conditions that are expected to most clearly reveal fitness costs. Our results did not reveal any significant costs for production of antibiotics by Pseudomonas fluorescens Pf0-1. Comparison of growth rates of the antibiotic-producing wild-type cells with those of non-antibiotic producing mutants did not reveal costs of antibiotic production either. Based on our findings we propose that the facultative production of antibiotics might not be selected to mitigate metabolic costs, but instead might be advantageous because it limits the risk of competitors evolving resistance, or even the risk of competitors feeding on the compounds produced.

  5. No apparent costs for facultative antibiotic production by the soil bacterium Pseudomonas fluorescens Pf0-1.

    Directory of Open Access Journals (Sweden)

    Paolina Garbeva

    Full Text Available BACKGROUND: Many soil-inhabiting bacteria are known to produce secondary metabolites that can suppress microorganisms competing for the same resources. The production of antimicrobial compounds is expected to incur fitness costs for the producing bacteria. Such costs form the basis for models on the co-existence of antibiotic-producing and non-antibiotic producing strains. However, so far studies quantifying the costs of antibiotic production by bacteria are scarce. The current study reports on possible costs, for antibiotic production by Pseudomonas fluorescens Pf0-1, a soil bacterium that is induced to produce a broad-spectrum antibiotic when it is confronted with non-related bacterial competitors or supernatants of their cultures. METHODOLOGY AND PRINCIPAL FINDINGS: We measured the possible cost of antibiotic production for Pseudomonas fluorescens Pf0-1 by monitoring changes in growth rate with and without induction of antibiotic production by supernatant of a bacterial competitor, namely Pedobacter sp.. Experiments were performed in liquid as well as on semi-solid media under nutrient-limited conditions that are expected to most clearly reveal fitness costs. Our results did not reveal any significant costs for production of antibiotics by Pseudomonas fluorescens Pf0-1. Comparison of growth rates of the antibiotic-producing wild-type cells with those of non-antibiotic producing mutants did not reveal costs of antibiotic production either. SIGNIFICANCE: Based on our findings we propose that the facultative production of antibiotics might not be selected to mitigate metabolic costs, but instead might be advantageous because it limits the risk of competitors evolving resistance, or even the risk of competitors feeding on the compounds produced.

  6. The economic cost of low domestic product prices in OPEC Member Countries

    International Nuclear Information System (INIS)

    Guerer, N.; Ban, J.

    2000-01-01

    The present state of subsidies on major oil products (gasoline, kerosene, diesel and fuel oil) in OPEC Member Countries is analysed, in order to quantify their economic cost, keeping in mind the importance of reforming or gradually removing subsidies as one of the crucial economic challenges facing many Member Countries. The paper begins with a general definition and description of subsidies, then discusses briefly the key issues in reforming/removing them, with the potential benefits. Following a section on subsidy level estimations in recent years, the subsidy implications in terms of the accruing budget burden and foregone revenues from additional export potential are presented. This is together with some arguments supporting the process of adjustment towards internationally competitive prices for oil products as an inescapable development for Member Countries; this should progress in gradual, but firm steps. (author)

  7. PECULIARITIES OF THE ELECTROTECHNICAL INDUSTRY AND THEIR IMPACT ON THE PRODUCTION COSTS

    Directory of Open Access Journals (Sweden)

    POPESCU (COSTACHE LUMINITA NICOLETA

    2014-05-01

    Full Text Available The electrotechnical industry is in the top branch within the industrial development and the technical progress, currently providing a wide range of innovative products and services, and as a result of this dynamic development, the electrotechnical industry has currently become a key industry for many other industrial sectors. Electricity has established itself in most areas of activity due to its easy use, easy distance transport, the fact that it can be turned into other forms of energy and because it is the most suitable for the supply of automation processes. Consequently, given that industry is the key factor for the recovery, modernization and economic revival of the country, we can say that the electrotechnical industry also has a crucial influence on Romania’s social and economic evolution, and this evolution is in its turn the result of the production cost monitoring and control in this sector.

  8. Production costs and operative margins in electric energy generation from biogas. Full-scale case studies in Italy.

    Science.gov (United States)

    Riva, C; Schievano, A; D'Imporzano, G; Adani, F

    2014-08-01

    The purpose of this study was to observe the economic sustainability of three different biogas full scale plants, fed with different organic matrices: energy crops (EC), manure, agro-industrial (Plants B and C) and organic fraction of municipal solid waste (OFMSW) (Plant A). The plants were observed for one year and total annual biomass feeding, biomass composition and biomass cost (€ Mg(-1)), initial investment cost and plant electric power production were registered. The unit costs of biogas and electric energy (€ Sm(-3)biogas, € kWh(-1)EE) were differently distributed, depending on the type of feed and plant. Plant A showed high management/maintenance cost for OFMSW treatment (0.155 € Sm(-3)biogas, 45% of total cost), Plant B suffered high cost for EC supply (0.130 € Sm(-3)biogas, 49% of total cost) and Plant C showed higher impact on the total costs because of the depreciation charge (0.146 € Sm(-3)biogas, 41% of total costs). The breakeven point for the tariff of electric energy, calculated for the different cases, resulted in the range 120-170 € MWh(-1)EE, depending on fed materials and plant scale. EC had great impact on biomass supply costs and should be reduced, in favor of organic waste and residues; plant scale still heavily influences the production costs. The EU States should drive incentives in dependence of these factors, to further develop this still promising sector. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Expected value analysis for integrated supplier selection and inventory control of multi-product inventory system with fuzzy cost

    Science.gov (United States)

    Sutrisno, Widowati, Tjahjana, R. Heru

    2017-12-01

    The future cost in many industrial problem is obviously uncertain. Then a mathematical analysis for a problem with uncertain cost is needed. In this article, we deals with the fuzzy expected value analysis to solve an integrated supplier selection and supplier selection problem with uncertain cost where the costs uncertainty is approached by a fuzzy variable. We formulate the mathematical model of the problems fuzzy expected value based quadratic optimization with total cost objective function and solve it by using expected value based fuzzy programming. From the numerical examples result performed by the authors, the supplier selection problem was solved i.e. the optimal supplier was selected for each time period where the optimal product volume of all product that should be purchased from each supplier for each time period was determined and the product stock level was controlled as decided by the authors i.e. it was followed the given reference level.

  10. Cost Analysis of an Air Brayton Receiver for a Solar Thermal Electric Power System in Selected Annual Production Volumes

    Science.gov (United States)

    1981-01-01

    Pioneer Engineering and Manufacturing Company estimated the cost of manufacturing and Air Brayton Receiver for a Solar Thermal Electric Power System as designed by the AiResearch Division of the Garrett Corporation. Production costs were estimated at annual volumes of 100; 1,000; 5,000; 10,000; 50,000; 100,000 and 1,000,000 units. These costs included direct labor, direct material and manufacturing burden. A make or buy analysis was made of each part of each volume. At high volumes special fabrication concepts were used to reduce operation cycle times. All costs were estimated at an assumed 100% plant capacity. Economic feasibility determined the level of production at which special concepts were to be introduced. Estimated costs were based on the economics of the last half of 1980. Tooling and capital equipment costs were estimated for ach volume. Infrastructure and personnel requirements were also estimated.

  11. Caregiver burden, productivity loss, and indirect costs associated with caring for patients with poststroke spasticity

    Directory of Open Access Journals (Sweden)

    Ganapathy V

    2015-11-01

    Full Text Available Vaidyanathan Ganapathy,1 Glenn D Graham,2 Marco D DiBonaventura,3 Patrick J Gillard,1 Amir Goren,3 Richard D Zorowitz41Allergan, Irvine, CA, USA; 2Department of Veterans Affairs, San Francisco, CA, USA; 3Health Outcomes Practice, Kantar Health, New York, NY, USA; 4Johns Hopkins Bayview Medical Center, Baltimore, MD, USAObjective: Many stroke survivors experience poststroke spasticity and the related inability to perform basic activities, which necessitates patient management and treatment, and exerts a considerable burden on the informal caregiver. The current study aims to estimate burden, productivity loss, and indirect costs for caregivers of stroke survivors with spasticity.Methods: Internet survey data were collected from 153 caregivers of stroke survivors with spasticity including caregiving time and difficulty (Oberst Caregiver Burden Scale, Work Productivity and Activity Impairment measures, and caregiver and patient characteristics. Fractional logit models examined predictors of work-related restriction, and work losses were monetized (2012 median US wages.Results: Mean Oberst Caregiver Burden Scale time and difficulty scores were 46.1 and 32.4, respectively. Employed caregivers (n=71 had overall work restriction (32%, absenteeism (9%, and presenteeism (27%. Caregiver characteristics, lack of nursing home coverage, and stroke survivors’ disability predicted all work restriction outcomes. The mean total lost-productivity cost per employed caregiver was US$835 per month (>$10,000 per year; 72% attributable to presenteeism.Conclusion: These findings demonstrate the substantial burden of caring for stroke survivors with spasticity illustrating the societal and economic impact of stroke that extends beyond the stroke survivor.Keywords: burden, caregiver, productivity, spasticity, stroke

  12. The production of reduced graphene oxide by a low-cost vacuum system for supercapacitors applications

    Energy Technology Data Exchange (ETDEWEB)

    Cardoso, Q.A.; Sakata, S.K.; Faria, R.N. [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil); Silva, F.M.; Vieira, L.S.; Casini, J.C.S., E-mail: julio.casini@ifro.edu.br [Instituto Federal de Ciencia e Tecnologia de Rondonia (IFRO), RO (Brazil)

    2016-07-01

    Graphene (G) has attracted great interest for its excellent electrical properties. However, the large-scale production of graphene is still currently under investigations. Graphene oxide (GO) can be partially reduced to graphene-like sheets by removing the oxygen-containing groups with the recovery of a conjugated structure. It can be produced using inexpensive graphite as raw material by cost-effective chemical methods. High vacuum and temperature (10{sup -7}mbar/1100 deg C) is well established as an effective route for reduced powder preparation on a laboratory scale. However, a high vacuum reduction system, which can be routinely operated at 10{sup -7} mbar, has a considerable capital, operational and maintenance cost to be used in a large scale. In the present work, a low-cost route aiming large scale reduction of graphene oxide has been investigated. A stainless steel vessel has been evacuated to backing-pump pressure (10{sup -2} mbar) to process graphene oxide at low and high temperatures. Attempts of reducing GO powder using low vacuum pressures have been carried out and investigated by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The experimental results of processing graphene oxide powder at various temperatures (200-1000°C) at relatively low pressures have been reported. The microstructures of the processed material have been investigated using scanning electron microscopy (SEM) and chemical microanalyses employing energy dispersive X-ray analysis (EDX). (author)

  13. The production of reduced graphene oxide by a low-cost vacuum system for supercapacitors applications

    International Nuclear Information System (INIS)

    Cardoso, Q.A.; Sakata, S.K.; Faria, R.N.; Silva, F.M.; Vieira, L.S.; Casini, J.C.S.

    2016-01-01

    Graphene (G) has attracted great interest for its excellent electrical properties. However, the large-scale production of graphene is still currently under investigations. Graphene oxide (GO) can be partially reduced to graphene-like sheets by removing the oxygen-containing groups with the recovery of a conjugated structure. It can be produced using inexpensive graphite as raw material by cost-effective chemical methods. High vacuum and temperature (10 -7 mbar/1100 deg C) is well established as an effective route for reduced powder preparation on a laboratory scale. However, a high vacuum reduction system, which can be routinely operated at 10 -7 mbar, has a considerable capital, operational and maintenance cost to be used in a large scale. In the present work, a low-cost route aiming large scale reduction of graphene oxide has been investigated. A stainless steel vessel has been evacuated to backing-pump pressure (10 -2 mbar) to process graphene oxide at low and high temperatures. Attempts of reducing GO powder using low vacuum pressures have been carried out and investigated by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The experimental results of processing graphene oxide powder at various temperatures (200-1000°C) at relatively low pressures have been reported. The microstructures of the processed material have been investigated using scanning electron microscopy (SEM) and chemical microanalyses employing energy dispersive X-ray analysis (EDX). (author)

  14. Cost versus life cycle assessment-based environmental impact optimization of drinking water production plants.

    Science.gov (United States)

    Capitanescu, F; Rege, S; Marvuglia, A; Benetto, E; Ahmadi, A; Gutiérrez, T Navarrete; Tiruta-Barna, L

    2016-07-15

    Empowering decision makers with cost-effective solutions for reducing industrial processes environmental burden, at both design and operation stages, is nowadays a major worldwide concern. The paper addresses this issue for the sector of drinking water production plants (DWPPs), seeking for optimal solutions trading-off operation cost and life cycle assessment (LCA)-based environmental impact while satisfying outlet water quality criteria. This leads to a challenging bi-objective constrained optimization problem, which relies on a computationally expensive intricate process-modelling simulator of the DWPP and has to be solved with limited computational budget. Since mathematical programming methods are unusable in this case, the paper examines the performances in tackling these challenges of six off-the-shelf state-of-the-art global meta-heuristic optimization algorithms, suitable for such simulation-based optimization, namely Strength Pareto Evolutionary Algorithm (SPEA2), Non-dominated Sorting Genetic Algorithm (NSGA-II), Indicator-based Evolutionary Algorithm (IBEA), Multi-Objective Evolutionary Algorithm based on Decomposition (MOEA/D), Differential Evolution (DE), and Particle Swarm Optimization (PSO). The results of optimization reveal that good reduction in both operating cost and environmental impact of the DWPP can be obtained. Furthermore, NSGA-II outperforms the other competing algorithms while MOEA/D and DE perform unexpectedly poorly. Copyright © 2016 Elsevier Ltd. All rights reserved.

  15. The concept of in-house management of the formation of the cost of production in the agricultural enterprises

    Directory of Open Access Journals (Sweden)

    Bobrova Elena Aleksandrovna

    2016-04-01

    Full Text Available The article deals with modern methods of intra-formation control the cost of agricultural production, the composition of the costs of agricultural firms, the order of their control and optimization. A structural model, which is a technique of internal control and audit at the macro and micro level hierarchical control agricultural enterprise. The composition of the information required to implement a methodology in-house control, accounting and analytical procedures used to assess the cost items and management decisions.

  16. Collaborative Monitoring of Production and Costs of Timber Harvest Operations in the Brazilian Amazon

    Directory of Open Access Journals (Sweden)

    Benno Pokorny

    2005-06-01

    Full Text Available Timber companies and policy makers in the Brazilian Amazon urgently need financial information on forest management. Results from a few experiments, case studies, and surveys have been groundbreaking, but are insufficient. A strategic partnership between timber companies and research organizations is needed to generate additional information. This paper presents a tool for monitoring production and costs of forest operations to facilitate such collaboration. The tool provides useful information for companies and, at the same time, generates reliable data for research. Selected results are presented on production, capacity, and costs to demonstrate the usefulness of the information that can be generated. These results are based on the first 2 years of implementation by a company in the State of Pará, Brazil. This pilot project confirmed that the tool is simple and relevant. Its successful implementation requires significant investment, and will be applicable only to companies interested in changing from conventional logging to reduced-impact logging, especially those seeking Forest Stewardship Council certification. Successful implementation of the tool will also depend on it generating readily understood and highly relevant results for the companies, and receiving extensive support during the first 2 years.

  17. Rehabilitating acid soils for increasing crop productivity through low-cost liming material.

    Science.gov (United States)

    Bhat, Javid Ahmad; Kundu, Manik Chandra; Hazra, Gora Chand; Santra, Gour Hari; Mandal, Biswapati

    2010-09-15

    Productivity of red and lateritic soils is low because of their acidity and deficiencies in few essential nutrients viz., nitrogen, phosphorus, calcium, zinc, boron, molybdenum etc. We compared the effectiveness of basic slag, a low-cost liming material, with that of calcite as an ameliorant for these soils using mustard followed by rice as test crops. Experiments were conducted with three levels of each of basic slag and calcite along with a control on farmers' fields at 14 different locations. Influence of farmyard manure (FYM) and poultry manure (PM) on the effectiveness of the slag was also tested. On an average, basic slag performed better than calcite in increasing yields of both mustard and rice and left over higher amounts of available Ca, Si and Zn in residual soils. The slag also improved N, P, K and Ca nutrition of mustard and Si and Zn nutrition of rice with a favorable benefit:cost (B:C) ratio over the calcite (4.82 vs. 1.44). Effectiveness of the basic slag improved when it was applied in combination with FYM or PM (B:C, 5.83 and 6.27). Basic slag can, therefore, be advocated for use in the acidic red and lateritic soils for economically improving their productivity. Copyright 2010 Elsevier B.V. All rights reserved.

  18. Rehabilitating acid soils for increasing crop productivity through low-cost liming material

    International Nuclear Information System (INIS)

    Bhat, Javid Ahmad; Kundu, Manik Chandra; Hazra, Gora Chand; Santra, Gour Hari; Mandal, Biswapati

    2010-01-01

    Productivity of red and lateritic soils is low because of their acidity and deficiencies in few essential nutrients viz., nitrogen, phosphorus, calcium, zinc, boron, molybdenum etc. We compared the effectiveness of basic slag, a low-cost liming material, with that of calcite as an ameliorant for these soils using mustard followed by rice as test crops. Experiments were conducted with three levels of each of basic slag and calcite along with a control on farmers' fields at 14 different locations. Influence of farmyard manure (FYM) and poultry manure (PM) on the effectiveness of the slag was also tested. On an average, basic slag performed better than calcite in increasing yields of both mustard and rice and left over higher amounts of available Ca, Si and Zn in residual soils. The slag also improved N, P, K and Ca nutrition of mustard and Si and Zn nutrition of rice with a favorable benefit:cost (B:C) ratio over the calcite (4.82 vs. 1.44). Effectiveness of the basic slag improved when it was applied in combination with FYM or PM (B:C, 5.83 and 6.27). Basic slag can, therefore, be advocated for use in the acidic red and lateritic soils for economically improving their productivity.

  19. Rehabilitating acid soils for increasing crop productivity through low-cost liming material

    Energy Technology Data Exchange (ETDEWEB)

    Bhat, Javid Ahmad [Directorate of Research, Bidhan Chandra Krishi Viswavidyalaya, Kalyani - 741 235, West Bengal (India); Kundu, Manik Chandra, E-mail: mckundu@rediffmail.com [Directorate of Research, Bidhan Chandra Krishi Viswavidyalaya, Kalyani - 741 235, West Bengal (India); Hazra, Gora Chand [Directorate of Research, Bidhan Chandra Krishi Viswavidyalaya, Kalyani - 741 235, West Bengal (India); Santra, Gour Hari [Department of Soil Science and Agril. Chemistry, Orissa University of Agriculture and Technology, Bhubaneswar - 751003, Orissa (India); Mandal, Biswapati [Directorate of Research, Bidhan Chandra Krishi Viswavidyalaya, Kalyani - 741 235, West Bengal (India)

    2010-09-15

    Productivity of red and lateritic soils is low because of their acidity and deficiencies in few essential nutrients viz., nitrogen, phosphorus, calcium, zinc, boron, molybdenum etc. We compared the effectiveness of basic slag, a low-cost liming material, with that of calcite as an ameliorant for these soils using mustard followed by rice as test crops. Experiments were conducted with three levels of each of basic slag and calcite along with a control on farmers' fields at 14 different locations. Influence of farmyard manure (FYM) and poultry manure (PM) on the effectiveness of the slag was also tested. On an average, basic slag performed better than calcite in increasing yields of both mustard and rice and left over higher amounts of available Ca, Si and Zn in residual soils. The slag also improved N, P, K and Ca nutrition of mustard and Si and Zn nutrition of rice with a favorable benefit:cost (B:C) ratio over the calcite (4.82 vs. 1.44). Effectiveness of the basic slag improved when it was applied in combination with FYM or PM (B:C, 5.83 and 6.27). Basic slag can, therefore, be advocated for use in the acidic red and lateritic soils for economically improving their productivity.

  20. Effects of alternative promoters of growth on the performance and cost of production of broilers

    Directory of Open Access Journals (Sweden)

    Patrícia Tomazini Medeiros

    2009-09-01

    Full Text Available Probiotics and prebiotics were compared to antimicrobials as alternative growth promoters in male broilers grown from 1 to 42 days of age. Eight treatments were evaluated: a control feed without antimicrobials or alternative growth promoters, a control feed with antimicrobials, a control feed with the antimicrobials colistine and avilamicine, three rations with probiotic Bacillus subtilis in different concentrations and/or under recommended usage, one ration with probiotic Saccharomyces cerevisiae in addition to a mixture of probiotic Bacillus subtilis, Saccharomyces cerevisiae and Aspergillus oryzae, and one ration with mananoligossacarids (MOS plus betaglutanes. Antimicrobials and alternative growth promoters were added to an initial feed and to a growth feed common to all birds. Thirteen to 17 replicates of 50 birds of a Cobb line were utilized per treatment in a completely randomized design. Feed consumption, feed conversion and production costs did not significantly differ among treatments. The weights of 42-day-old birds fed on Bacillus subtilis (1,6 x 109CFU/g or the mixture of probiotics were higher or similar to the weights of birds fed on ration with antimicrobials. It was concluded that probiotics can replace antimicrobials as growth promoters for broilers up to 42 days of age without negative effects on growth performance and production cost.