Measuring excess capital capacity in agricultural production

NARCIS (Netherlands)

Zhengfei, G.; Kumbhakar, S.C.; Myers, R.J.; Oude Lansink, A.G.J.M.

2009-01-01

We introduce the concept "excess capital capacity" and employ a stochastic input requirement frontier to measure excess capital capacity in agricultural production. We also propose a two-step estimation method that allows endogenous regressors in stochastic frontier models. The first step uses

Phenolic Content and Antioxidant Capacity in Algal Food Products

Directory of Open Access Journals (Sweden)

Ludmila Machu

2015-01-01

Full Text Available The study objective was to investigate total phenolic content using Folin-Ciocalteu’s method, to assess nine phenols by HPLC, to determine antioxidant capacity of the water soluble compounds (ACW by a photochemiluminescence method, and to calculate the correlation coefficients in commercial algal food products from brown (Laminaria japonica, Eisenia bicyclis, Hizikia fusiformis, Undaria pinnatifida and red (Porphyra tenera, Palmaria palmata seaweed, green freshwater algae (Chlorella pyrenoidosa, and cyanobacteria (Spirulina platensis. HPLC analysis showed that the most abundant phenolic compound was epicatechin. From spectrophotometry and ACW determination it was evident that brown seaweed Eisenia bicyclis was the sample with the highest phenolic and ACW values (193 mg·g−1 GAE; 7.53 µmol AA·g−1, respectively. A linear relationship existed between ACW and phenolic contents (r = 0.99. Some algal products seem to be promising functional foods rich in polyphenols.

JOINT OPTIMIZATION OF PRODUCTION PLANNING AND VEHICLE ROUTING PROBLEMS: A REVIEW OF EXISTING STRATEGIES

Directory of Open Access Journals (Sweden)

Marc Reimann

2014-05-01

Full Text Available Keen competition and increasingly demanding customers have forced companies to use their resources more efficiently and to integrate production and transportation planning. In the last few years more and more researchers have also focused on this challenging problem by trying to determine the complexity of the individual problems and then developing fast and robust algorithms to solve them. This paper reviews existing literature on integrated production and distribution decisions at the tactical and operational level, where the distribution part is modelled as some variation of the well-known Vehicle Routing Problem (VRP. The focus is thereby on problems that explicitly consider deliveries to multiple clients in a less-than-truckload fashion. In terms of the production decisions we distinguish in our review between tactical and operational production problems by considering lot-sizing/capacity allocation and scheduling models, respectively.

Baseline analysis of the existing capacities and needs for capacity building for Marine Strategy Framework Directive implementation in the Celtic Seas sub-region.

OpenAIRE

Twomey, Sarah; O'Mahony, Cathal

2013-01-01

This report evaluates the existing situation in the Celtic Seas sub-region and determines the current state of preparedness for transboundary management of marine ecosystems and MSFD implementation. Recommendations for capacity building are provided through the analysis of the existing conflicts and potential synergies between relevant policies, institutions and information resources for MSFD implementation across the region. This report strives to empower stakeholders through the provision o...

Expanding OPEC production capacity: some legal and environmental aspects

International Nuclear Information System (INIS)

Al-Sahlawi, M.A.

1992-01-01

There is general consensus that the global demand for oil will increase in the medium-to-long term. It is predicted that much of this additional demand will be for OPEC oil. Therefore, it will become necessary to expand OPEC production capacity to meet this perceived increase. In recent years, many OPEC countries have launched far-reaching and, in some cases, radical plans to expand their production capacity. However, given the various investment and political constraints faced by the 13 OPEC Members, each country differs markedly in its ability to boost production capacity sufficiently to meet self-imposed targets. In this paper, we examine the importance to the oil market of recent oil supply trends and possible future attempts to build OPEC production capacity, focussing in particular on the legal and environmental issues involved. A review is provided of the legal mechanisms currently evolving in OPEC Countries to encourage investment in their oil industries. In addition, we outline the impact of the environmental movement of OPEC's expansion programmes. (author)

Natural gas productive capacity for the lower 48 States, 1980 through 1995

International Nuclear Information System (INIS)

1994-01-01

The purpose of this report is to analyze monthly natural gas wellhead productive capacity in the lower 48 States from 1980 through 1992 and project this capacity from 1993 through 1995. For decades, natural gas supplies and productive capacity have been adequate to meet demand. In the 1970's the capacity surplus was small because of market structure (split between interstate and intrastate), increasing demand, and insufficient drilling. In the early 1980's, lower demand, together with increased drilling, led to a large surplus capacity as new productive capacity came on line. After 1986, this large surplus began to decline as demand for gas increased, gas prices fell, and gas well completions dropped sharply. In late December 1989, the decline in this surplus, accompanied by exceptionally high demand and temporary weather-related production losses, led to concerns about the adequacy of monthly productive capacity for natural gas. These concerns should have been moderated by the gas system's performance during the unusually severe winter weather in March 1993 and January 1994. The declining trend in wellhead productive capacity is expected to be reversed in 1994 if natural gas prices and drilling meet or exceed the base case assumption. This study indicates that in the low, base, and high drilling cases, monthly productive capacity should be able to meet normal production demands through 1995 in the lower 48 States (Figure ES1). Exceptionally high peak-day or peak-week production demand might not be met because of physical limitations such as pipeline capacity. Beyond 1995, as the capacity of currently producing wells declines, a sufficient number of wells and/or imports must be added each year in order to ensure an adequate gas supply

Agricultural Capacity to Increase the Production of Select Fruits and Vegetables in the US: A Geospatial Modeling Analysis.

Science.gov (United States)

Conrad, Zach; Peters, Christian J; Chui, Kenneth; Jahns, Lisa; Griffin, Timothy S

2017-09-23

The capacity of US agriculture to increase the output of specific foods to accommodate increased demand is not well documented. This research uses geospatial modeling to examine the capacity of the US agricultural landbase to increase the per capita availability of an example set of nutrient-dense fruits and vegetables. These fruits and vegetables were selected based on nutrient content and an increasing trend of domestic production and consumption. Geographic information system models were parameterized to identify agricultural land areas meeting crop-specific growing requirements for monthly precipitation and temperature; soil depth and type; cropland availability; and proximity to existing production centers. The results of these analyses demonstrate that crop production can be expanded by nearly 144,000 ha within existing national production centers, generating an additional 0.05 cup-equivalents of fruits and vegetables per capita per day, representing a 1.7% increase above current total F&V availability. Expanding the size of national crop production centers can further increase the availability of all F&V by 2.5%-5.4%, which is still less than the recommended amount. Challenges to increasing F&V production in the US include lack of labor availability, barriers to adoption among producers, and threats to crop yields from environmental concerns.

Draft environmental impact statement siting, construction, and operation of New Production Reactor capacity. Volume 4, Appendices D-R

Energy Technology Data Exchange (ETDEWEB)

None

1991-04-01

This Environmental Impact Statement (EIS) assesses the potential environmental impacts, both on a broad programmatic level and on a project-specific level, concerning a proposed action to provide new tritium production capacity to meet the nation`s nuclear defense requirements well into the 21st century. A capacity equivalent to that of about a 3,000-megawatt (thermal) heavy-water reactor was assumed as a reference basis for analysis in this EIS; this is the approximate capacity of the existing production reactors at DOE`s Savannah River Site near Aiken, South Carolina. The EIS programmatic alternatives address Departmental decisions to be made on whether to build new production facilities, whether to build one or more complexes, what size production capacity to provide, and when to provide this capacity. Project-specific impacts for siting, constructing, and operating new production reactor capacity are assessed for three alternative sites: the Hanford Site near Richland, Washington; the Idaho National Engineering Laboratory near Idaho Falls, Idaho; and the Savannah River Site. For each site, the impacts of three reactor technologies (and supporting facilities) are assessed: a heavy-water reactor, a light-water reactor, and a modular high-temperature gas-cooled reactor. Impacts of the no-action alternative also are assessed. The EIS evaluates impacts related to air quality; noise levels; surface water, groundwater, and wetlands; land use; recreation; visual environment; biotic resources; historical, archaeological, and cultural resources; socioeconomics; transportation; waste management; and human health and safety. The EIS describes in detail the potential radioactive releases from new production reactors and support facilities and assesses the potential doses to workers and the general public. This volume contains 15 appendices.

Upgrading the seismic capacity of existing RC buildings using buckling restrained braces

Directory of Open Access Journals (Sweden)

Hamdy Abou-Elfath

2017-06-01

Full Text Available Many existing RC buildings do not meet the lateral strength requirements of current seismic codes and are vulnerable to significant damage or collapse in the event of future earthquakes. In the past few decades, buckling-restrained braces have become increasingly popular as a lateral force resisting system because of their capability of improving the strength, the stiffness and the energy absorbing capacity of structures. This study evaluates the seismic upgrading of a 6-story RC-building using single diagonal buckling restrained braces. Seismic evaluation in this study has been carried out by static pushover analysis and time history earthquake analysis. Ten ground motions with different PGA levels are used in the analysis. The mean plus one standard deviation values of the roof-drift ratio, the maximum story drift ratio, the brace ductility factors and the member strain responses are used as the basis for the seismic performance evaluations. The results obtained in this study indicate that strengthening of RC buildings with buckling restrained braces is an efficient technique as it significantly increases the PGA capacity of the RC buildings. The results also indicate the increase in the PGA capacity of the RC building with the increase in the amount of the braces.

Global exploration and production capacity for platinum-group metals from 1995 through 2015

Science.gov (United States)

Wilburn, David R.

2012-01-01

Platinum-group metals (PGMs) are required in a variety of commercial, industrial, and military applications for many existing and emerging technologies, yet the United States is highly dependent on foreign sources of PGMs. Information on global exploration for PGMs since 1995 has been used in this study as a basis for identifying locations where the industry has determined that exploration has provided data sufficient to warrant development of a new mine or expansion of an existing operation or where a significant increase in capacity for PGMs is anticipated by 2015. Discussions include an overview of the industry and the selected sites, factors affecting mineral supply, and circumstances leading to the development of mineral properties with the potential to affect mineral supply. Of the 52 sites or regional operations that were considered in this analysis, 16 sites were producing before 1995, 28 sites commenced production from 1995 through 2010, and 8 sites were expected to begin production from 2011 through 2015 if development plans came to fruition. The United States imports PGMs primarily from Canada, Russia, South Africa, and Zimbabwe to meet increasing demand for these materials in a variety of specialized and high-tech applications. Feed sources of PGMs are changing in South Africa and Russia, which together accounted for about 89 percent of platinum production and 82 percent of palladium production in 2009. A greater amount of South African PGM capacity is likely to come from deeper, higher cost Upper Group Reef seam 2 deposits and deposits in the Eastern Bushveld area. Future Russian PGM capacity is likely to come from ore zones with generally lower PGM content and different platinum-to-palladium ratios than the nickel-rich ore that dominated PGM supply in the 1990s. Because PGM supply from Canada and Russia is derived as a byproduct of copper and nickel mining, the PGM supply from these countries is influenced by economic, environmental, political, and

Modeling intermediate product selection under production and storage capacity limitations in food processing

DEFF Research Database (Denmark)

Kilic, Onur Alper; Akkerman, Renzo; Grunow, Martin

2009-01-01

In the food industry products are usually characterized by their recipes, which are specified by various quality attributes. For end products, this is given by customer requirements, but for intermediate products, the recipes can be chosen in such a way that raw material procurement costs and pro...... with production and inventory planning, thereby considering the production and storage capacity limitations. The resulting model can be used to solve an important practical problem typical for many food processing industries.......In the food industry products are usually characterized by their recipes, which are specified by various quality attributes. For end products, this is given by customer requirements, but for intermediate products, the recipes can be chosen in such a way that raw material procurement costs...... and processing costs are minimized. However, this product selection process is bound by production and storage capacity limitations, such as the number and size of storage tanks or silos. In this paper, we present a mathematical programming approach that combines decision making on product selection...

NASA's Indigenous Capacity Building Initiative: Balancing Traditional Knowledge and Existing Remote Sensing Training to Inform Management Decisions

Science.gov (United States)

McCullum, A. J. K.; Schmidt, C.; Palacios, S. L.; Ly, V.

2017-12-01

NASA's Indigenous Capacity Building Initiative is aimed to provide remote sensing training, mentoring, and research opportunities to the indigenous community. A key programmatic goal is the co-production of place-based trainings where participants have the opportunity to address specific natural resource research and management issues facing their tribal lands. Three primary strategies have been adopted to engage with our tribal partners, these include: (1) the use of existing tribal networks and conferences such as the National Tribal GIS Conference, (2) coordination with other federal agencies such as the Bureau of Indian Affairs (BIA) and tribal liaisons at regional Climate Science Centers, and (3) connecting with tribes directly. Regional partner visits with tribes, such as meetings with the Samish Indian Nation, are integral to cultivate trusting, collaborative, and sustained partnerships and an understanding of how Earth Observations can be applied to the unique set of challenges and goals each tribe faces. As the program continues to grow, we aim to increase our incorporation of Traditional Ecological Knowledge (TEK) into technical methods and to develop trainings tailored to thematic areas of interest to specific tribes. Engagement and feedback are encouraged to refine our approaches to increase capacity within the indigenous community to utilize NASA Earth Observations.

Peak capacity, peak-capacity production rate, and boiling point resolution for temperature-programmed GC with very high programming rates

Science.gov (United States)

Grall; Leonard; Sacks

2000-02-01

Recent advances in column heating technology have made possible very fast linear temperature programming for high-speed gas chromatography. A fused-silica capillary column is contained in a tubular metal jacket, which is resistively heated by a precision power supply. With very rapid column heating, the rate of peak-capacity production is significantly enhanced, but the total peak capacity and the boiling-point resolution (minimum boiling-point difference required for the separation of two nonpolar compounds on a nonpolar column) are reduced relative to more conventional heating rates used with convection-oven instruments. As temperature-programming rates increase, elution temperatures also increase with the result that retention may become insignificant prior to elution. This results in inefficient utilization of the down-stream end of the column and causes a loss in the rate of peak-capacity production. The rate of peak-capacity production is increased by the use of shorter columns and higher carrier gas velocities. With high programming rates (100-600 degrees C/min), column lengths of 6-12 m and average linear carrier gas velocities in the 100-150 cm/s range are satisfactory. In this study, the rate of peak-capacity production, the total peak capacity, and the boiling point resolution are determined for C10-C28 n-alkanes using 6-18 m long columns, 50-200 cm/s average carrier gas velocities, and 60-600 degrees C/min programming rates. It was found that with a 6-meter-long, 0.25-mm i.d. column programmed at a rate of 600 degrees C/min, a maximum peak-capacity production rate of 6.1 peaks/s was obtained. A total peak capacity of about 75 peaks was produced in a 37-s long separation spanning a boiling-point range from n-C10 (174 degrees C) to n-C28 (432 degrees C).

Challenges facing the financing of oil production capacity in the Gulf

International Nuclear Information System (INIS)

Abi-Aad, Naji.

1995-01-01

The estimates of the required capital for maintaining and expanding oil production capacity in the 'Big Five' producers in the Gulf (Iran, Iraq, Kuwait, Saudi Arabia and the United Emirates) are large numbers. In fact, looking at the total cost of raising the Gulf oil production capacity from 18.5 million b/d in 1990 to 26.8 million b/d in the year 2005, the eventual sum is likely to end up at around $192 billion (1990 $) of which about $150 billion will be required as normal investment to maintain current output levels, and a further $42 billion will be necessary to develop new capacities. In short, the Gulf countries will need to spend an average of $12-13 billion per year to maintain current production and to raise some 8.3 million b/d of new capacity by 2005. (author)

On the optimal production capacity for influenza vaccine.

Science.gov (United States)

Forslid, Rikard; Herzing, Mathias

2015-06-01

This paper analyzes the profit maximizing capacity choice of a monopolistic vaccine producer facing the uncertain event of a pandemic in a homogenous population of forward-looking individuals. For any capacity level, the monopolist solves the intertemporal price discrimination problem within the dynamic setting generated by the standard mathematical epidemiological model of infectious diseases. Even though consumers are assumed to be identical, the monopolist will be able to exploit the ex post heterogeneity between infected and susceptible individuals by raising the price of vaccine in response to the increasing hazard rate. The monopolist thus bases its investment decision on the expected profits from the optimal price path given the infection dynamics. It is shown that the monopolist will always choose to invest in a lower production capacity than the social planner. Through numerical simulation, it is demonstrated how the loss to society of having a monopoly producer decreases with the speed of infection transmission. Moreover, it is illustrated how the monopolist's optimal vaccination rate increases as its discount rate rises for cost parameters based on Swedish data. However, the effect of the firm discount rate on its investment decision is sensitive to assumptions regarding the cost of production capacity. Copyright © 2014 John Wiley & Sons, Ltd.

It Systems Supporting the Management of Production Capacity

Science.gov (United States)

Milewska, Elżbieta

2017-03-01

The paper presents the problem of manufacturing process flexibility in view of a company's material and information flow stream management. The author of the article has described the functions of a production process control system and presented the characteristics of production capacity intensive and extensive reserves. The MRP II/ERP, MES and APS class IT tools supporting the process of production planning, organization and control have also been discussed.

IT SYSTEMS SUPPORTING THE MANAGEMENT OF PRODUCTION CAPACITY

OpenAIRE

Elżbieta MILEWSKA

2017-01-01

The paper presents the problem of manufacturing process flexibility in view of a company’s material and information flow stream management. The author of the article has described the functions of a production process control system and presented the characteristics of production capacity intensive and extensive reserves. The MRP II/ERP, MES and APS class IT tools supporting the process of production planning, organization and control have also been discussed.

Existence and equivalence of twisted products on a symplectic manifold

International Nuclear Information System (INIS)

Lichnerowicz, A.

1979-01-01

The twisted products play an important role in Quantum Mechanics. A distinction is introduced between Vey *sub(γ) products and strong Vey *sub(γ) products and it is proved that each *sub(γ) product is equivalent to a Vey *sub(γ) product. If b 3 (W) = 0, the symplectic manifold (W,F) admits strong Vey *sub(Gn) products. If b 2 (W) = 0, all *sub(γ) products are equivalent as well as the Vey Lie algebras. In the general case the formal Lie algebras are characterized which are generated by a *sub(γ) product and it proved that the existance of a *sub(γ)-product is equivalent to the existance of a formal Lie algebra infinitesimally equivalent to a Vey Lie algebra at the first order. (Auth.)

IT SYSTEMS SUPPORTING THE MANAGEMENT OF PRODUCTION CAPACITY

Directory of Open Access Journals (Sweden)

Elżbieta MILEWSKA

2017-01-01

Full Text Available The paper presents the problem of manufacturing process flexibility in view of a company’s material and information flow stream management. The author of the article has described the functions of a production process control system and presented the characteristics of production capacity intensive and extensive reserves. The MRP II/ERP, MES and APS class IT tools supporting the process of production planning, organization and control have also been discussed.

Pdvsa plans to hike productive capacity

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that Venezuela's state oil company plans to jump its productive capacity by 117,000 b/d to 2.92 million b/d this year. Petroleos de Venezuela also projects sizable increases for oil and gas reserves and plans record spending in 1992. Meantime, Pdvsa is sounding a warning again about the Venezuelan government's excessive tax take amid debate within the company about spending priorities

Draft environmental impact statement for the siting, construction, and operation of New Production Reactor capacity. Volume 2, Sections 1-6

Energy Technology Data Exchange (ETDEWEB)

1991-04-01

This (EIS) assesses the potential environmental impacts, both on a broad programmatic level and on a project-specific level, concerning a proposed action to provide new tritium production capacity to meet the nation`s nuclear defense requirements well into the 21st century. A capacity equivalent to that of about a 3,000-megawatt (thermal) heavy-water reactor was assumed as a reference basis for analysis in this EIS; this is the approximate capacity of the existing production reactors at DOE`s Savannah River Site. The EIS programmatic alternatives address Departmental decisions to be made on whether to build new production facilities, whether to build one or more complexes, what size production capacity to provide, and when to provide this capacity. Project-specific impacts for siting, constructing, and operating new production reactor capacity are assessed for three alternative sites: the Hanford Site near Richland, Washington; the Idaho National Engineering Laboratory near Idaho Falls, Idaho; and the Savannah River Site. For each site, the impacts of three reactor technologies (and supporting facilities) are assessed: a heavy-water reactor, a light-water reactor, and a modular high-temperature gas-cooled reactor. Impacts of the no-action alternative also are assessed. The EIS evaluates impacts related to air quality; noise levels; surface water, groundwater, and wetlands; land use; recreation; visual environment; biotic resources; historical, archaeological, and cultural resources; socioeconomics; transportation; waste management; and human health and safety. The EIS describes in detail the potential radioactive releases from new production reactors and support facilities and assesses the potential doses to workers and the general public. This volume contains the analysis of programmatic alternatives, project alternatives, affected environment of alternative sites, environmental consequences, and environmental regulations and permit requirements.

Management model of productive capacity: integrating theory of constraints and the global operational efficiency index (IROG

Directory of Open Access Journals (Sweden)

Diego Augusto Pacheco

2012-08-01

Full Text Available This paper presents a model of management capacity in productive systems integrating the concepts of the Theory of Constraints and Total Productive Maintenance (TPM. The main objective of this study is to discuss and propose a model of management capacity, able to answer the following key questions: i capacity indicators which should be considered and how to measure them to measure the productive capacity of manufacturing systems? ii what is the real productive capacity of the system analyzed under a determined relationship between capacity and demand? The discussion of the proposed model is relevant because the definition of productive capacity system enables better management of resources and capabilities, improve production scheduling on the factory floor and meeting the demands imposed by the market. This paper presents the proposition of using the Operating Income Index Global (IROG with a different approach from traditional literature dealing with the theme, presented by Nakajima (1988. The results of this paper enable to develop a model to determine the capacity of the production system and the impact on the productive capacity of the entire system, not to consider the quality conformances that occur after the bottleneck resource of the production flow.

46 CFR 105.90-1 - Existing commercial fishing vessels dispensing petroleum products.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Existing commercial fishing vessels dispensing petroleum... AND MISCELLANEOUS VESSELS COMMERCIAL FISHING VESSELS DISPENSING PETROLEUM PRODUCTS Existing Commercial Fishing Vessels Dispensing Petroleum Products § 105.90-1 Existing commercial fishing vessels dispensing...

Nigeria's oil production and the need for increased producing capacity

International Nuclear Information System (INIS)

Okoroji, C. E. I.

1998-01-01

After 40 years of commercial oil production, Nigeria's crude oil production is moving through difficult times. This transition period has been made more difficult because of recurring international economic recession, lack-luster crude prices, and slow oil demand growth and Government funding problems etc. Crude oil remains the most important export revenue earner in Nigeria, and more efforts are required to encourage higher output levels to support more foreign exchange generation. Nigeria's crude oil production at present stands at 2.2 million barrels per day (mbpd). This study, covers the period 1998-2005, during which oil production is forecast to grow to about 2.85 mbpd while potential for new discoveries could raise production to more than 3.0 mbpd. These projected rates could depend to a large extent on the rate and size of new discoveries. However, Nigeria's crude oil potential is being constrained by both lack of infrastructure and inadequate investment. The massive investment needed to raise the country's productive capacity will require foreign capital, yet the current fiscal environment leaves much to be desired. The purpose of this paper is to present a review of Nigeria's past, present and future oil production. To meet the projected production capacity very early in the next millennium, current estimates put the overall potential investment needed for an accelerated capacity-expansion drive in order to ensure that there is adequate cushion of crude potential at $19.7 billion during the next seven years. Furthermore, not more than $12.0 billion of this requirement can be generated from Nigeria's government cash flow

Assessment of the transportation route of oversize and excessive loads in relation to the load-bearing capacity of existing bridges

Science.gov (United States)

Doležel, Jiří; Novák, Drahomír; Petrů, Jan

2017-09-01

Transportation routes of oversize and excessive loads are currently planned in relation to ensure the transit of a vehicle through critical points on the road. Critical points are level-intersection of roads, bridges etc. This article presents a comprehensive procedure to determine a reliability and a load-bearing capacity level of the existing bridges on highways and roads using the advanced methods of reliability analysis based on simulation techniques of Monte Carlo type in combination with nonlinear finite element method analysis. The safety index is considered as a main criterion of the reliability level of the existing construction structures and the index is described in current structural design standards, e.g. ISO and Eurocode. An example of a single-span slab bridge made of precast prestressed concrete girders of the 60 year current time and its load bearing capacity is set for the ultimate limit state and serviceability limit state. The structure’s design load capacity was estimated by the full probability nonlinear MKP analysis using a simulation technique Latin Hypercube Sampling (LHS). Load-bearing capacity values based on a fully probabilistic analysis are compared with the load-bearing capacity levels which were estimated by deterministic methods of a critical section of the most loaded girders.

Perfusion seed cultures improve biopharmaceutical fed-batch production capacity and product quality.

Science.gov (United States)

Yang, William C; Lu, Jiuyi; Kwiatkowski, Chris; Yuan, Hang; Kshirsagar, Rashmi; Ryll, Thomas; Huang, Yao-Ming

2014-01-01

Volumetric productivity and product quality are two key performance indicators for any biopharmaceutical cell culture process. In this work, we showed proof-of-concept for improving both through the use of alternating tangential flow perfusion seed cultures coupled with high-seed fed-batch production cultures. First, we optimized the perfusion N-1 stage, the seed train bioreactor stage immediately prior to the production bioreactor stage, to minimize the consumption of perfusion media for one CHO cell line and then successfully applied the optimized perfusion process to a different CHO cell line. Exponential growth was observed throughout the N-1 duration, reaching >40 × 10(6) vc/mL at the end of the perfusion N-1 stage. The cultures were subsequently split into high-seed (10 × 10(6) vc/mL) fed-batch production cultures. This strategy significantly shortened the culture duration. The high-seed fed-batch production processes for cell lines A and B reached 5 g/L titer in 12 days, while their respective low-seed processes reached the same titer in 17 days. The shortened production culture duration potentially generates a 30% increase in manufacturing capacity while yielding comparable product quality. When perfusion N-1 and high-seed fed-batch production were applied to cell line C, higher levels of the active protein were obtained, compared to the low-seed process. This, combined with correspondingly lower levels of the inactive species, can enhance the overall process yield for the active species. Using three different CHO cell lines, we showed that perfusion seed cultures can optimize capacity utilization and improve process efficiency by increasing volumetric productivity while maintaining or improving product quality. © 2014 American Institute of Chemical Engineers.

Improving Power System Modeling. A Tool to Link Capacity Expansion and Production Cost Models

Energy Technology Data Exchange (ETDEWEB)

Diakov, Victor [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cole, Wesley [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sullivan, Patrick [National Renewable Energy Lab. (NREL), Golden, CO (United States); Brinkman, Gregory [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2015-11-01

Capacity expansion models (CEM) provide a high-level long-term view at the prospects of the evolving power system. In simulating the possibilities of long-term capacity expansion, it is important to maintain the viability of power system operation in the short-term (daily, hourly and sub-hourly) scales. Production-cost models (PCM) simulate routine power system operation on these shorter time scales using detailed load, transmission and generation fleet data by minimizing production costs and following reliability requirements. When based on CEM 'predictions' about generating unit retirements and buildup, PCM provide more detailed simulation for the short-term system operation and, consequently, may confirm the validity of capacity expansion predictions. Further, production cost model simulations of a system that is based on capacity expansion model solution are 'evolutionary' sound: the generator mix is the result of logical sequence of unit retirement and buildup resulting from policy and incentives. The above has motivated us to bridge CEM with PCM by building a capacity expansion - to - production cost model Linking Tool (CEPCoLT). The Linking Tool is built to onset capacity expansion model prescriptions onto production cost model inputs. NREL's ReEDS and Energy Examplar's PLEXOS are the capacity expansion and the production cost models, respectively. Via the Linking Tool, PLEXOS provides details of operation for the regionally-defined ReEDS scenarios.

Commandants' Managerial Capacity and Workers Productivity in ...

African Journals Online (AJOL)

The purpose of this study is to evaluate the commandant's managerial capacity as if relates to workers productivity with a view to determining whether their calling to the education terrain has been justified and to correct certain areas in need of improvement in the Nigeria Police Education set up. In doing this, the study took ...

Capacity and investments in power production. Studies concerning Germany, the Netherlands and Poland; Kapasitet og investeringer i kraftproduksjon. Landstudier for Tyskland, Nederland og Polen

Energy Technology Data Exchange (ETDEWEB)

Haugland, Torleif; Magnus, Eivind; Moen, Paal; Bowitz, Einar

1998-12-01

This report describes the production capacity for electricity in Germany, the Netherlands and Poland and presents plans existing in these countries for investments in new capacity and scrapping of existing capacity. Using economic theory it discusses some issues that influence investments in a liberalized market. It is part of a project undertaken to quantify the value of power in the Norwegian hydroelectric power system. The observations and conclusions will form an important empirical foundation for the analysis of the adaptation and stability properties of the Nordic power market as one approaches full capacity with respect to power at peak load. The report will be followed up by an analysis of the developments of investments, market balance and prices up to 2015 in the three countries. These countries have considerable surplus capacities, but for reasons that vary from country to country. The composition of the surplus capacities also vary considerably from one country to the other, which is important for the impact that the capacity and market balance in these countries might have on the Nordic power market in the future. 16 refs., 23 figs., 17 tabs.

Botanical Composition, Grass Production, and Carrying Capacity of Pasture in Timor Tengah Selatan District

Directory of Open Access Journals (Sweden)

V. E. Se’u

2015-12-01

Full Text Available This study was conducted to analyze the botanical composition, grass production, carrying capacity, and potential production of nutrients in pasture located in Timor Tengah Selatan Regency. The experiment was conducted from February to July 2013, using field survey method. The botanical composition, grass production and carrying capacity on real condition were analyzed descriptively, while the grass production and carrying capacity based of cutting arrangement were analyzed by using randomized block factorial design with 3 altitude locations (Sub District of Mollo Utara with altitude of 1007 m above sea level; Sub District of Noebeba, 500 m ASL, and Sub District of Amanuban Selatan, 65 m ASL x 2 cutting intervals (1 and 2 month and 5 replications. The results showed that the grass type dominated the pasture in the Sub District of Mollo Utara, while legum type was more dominant in the pasture in the Sub Districts of Noebeba and Amanuban Selatan. The potential production of dry matter grass in Timor Tengah Selatan Regency based on real condition was 150 to 390 kg/ha/yr, this could accommodate 0.24 to 0.63 AU/ha/yr. The arrangement of cutting interval by 1 month in Mollo Utara and 2 months in Noebeba and Amanuban Selatan could increase (P<0.05 grass production and carrying capacity. The potential productions of grass nutrients were higher in Sub District of Mollo Utara, while potential production of grass dry matter was higher in Sub Districts of Noebeba and Amanuban Selatan. It was concluded that grass dry matter potential production and carrying capacity in Timor Tengah Selatan Regency were low. The arrangement of cutting interval could increase grass dry matter potential production, carrying capacity, nutrition production, and quality of nutrition.

New product introduction and capacity investment by incumbents: Effects of size on strategy

NARCIS (Netherlands)

Dawid, H.; Kopel, M.; Kort, P.M.

2013-01-01

We analyze a duopoly where capacity-constrained firms offer an established product and have the option to offer an additional new and differentiated product. We show that the firm with the smaller capacity on the established market has a higher incentive to innovate and reaches a larger market share

Seismic capacities of existing nuclear power plant structures

International Nuclear Information System (INIS)

Wesley, D.A.; Hashimoto, P.S.; Narver, R.B.

1983-01-01

The paper presents a discussion of the more important conservatisms and some of the results obtained when this methodology has been applied to various nuclear plants. Results are shown for both BWR and PWR plants, on both rock and soil sites, and for plants and soil sites, and for plants that were designed in the late 1960s to plants that have yet to load fuel. Safe shutdown earthquake design levels of 0.1 g to 0.25 g were used for these plants. Overall median structural factors of safety for the lowest significant seismic failure capacity at each plant ranged from 3.5 to 8.5. The lowest containment-related failure capacity at each plant ranged from 4.6 to 31. The types of failure corresponding to each safety factor are also tabulated. (orig./HP)

Draft environmental impact statement for the siting, construction, and operation of New Production Reactor capacity. Volume 3, Sections 7-12, Appendices A-C

Energy Technology Data Exchange (ETDEWEB)

1991-04-01

This Environmental Impact Statement (EIS) assesses the potential environmental impacts, both on a broad programmatic level and on a project-specific level, concerning a proposed action to provide new tritium production capacity to meet the nation`s nuclear defense requirements well into the 21st century. A capacity equivalent to that of about a 3,000-megawatt (thermal) heavy-water reactor was assumed as a reference basis for analysis in this EIS; this is the approximate capacity of the existing production reactors at DOE`s Savannah River Site near Aiken, South Carolina. The EIS programmatic alternatives address Departmental decisions to be made on whether to build new production facilities, whether to build one or more complexes, what size production capacity to provide, and when to provide this capacity. Project-specific impacts for siting, constructing, and operating new production reactor capacity are assessed for three alternative sites: the Hanford Site near Richland, Washington; the Idaho National Engineering Laboratory near Idaho Falls, Idaho; and the Savannah River Site. For each site, the impacts of three reactor technologies (and supporting facilities) are assessed: a heavy-water reactor, a light-water reactor, and a modular high-temperature gas-cooled reactor. Impacts of the no-action alternative also are assessed. The EIS evaluates impacts related to air quality; noise levels; surface water, groundwater, and wetlands; land use; recreation; visual environment; biotic resources; historical, archaeological, and cultural resources; socioeconomics; transportation; waste management; and human health and safety. The EIS describes in detail the potential radioactive releases from new production reactors and support facilities and assesses the potential doses to workers and the general public. This volume contains references; a list of preparers and recipients; acronyms, abbreviations, and units of measure; a glossary; an index and three appendices.

Increased Capacity for Work and Productivity After Breast Reduction.

Science.gov (United States)

Cabral, Isaias Vieira; Garcia, Edgard da Silva; Sobrinho, Rebecca Neponucena; Pinto, Natália Lana Larcher; Juliano, Yara; Veiga-Filho, Joel; Ferreira, Lydia Masako; Veiga, Daniela Francescato

2017-01-01

Breast hypertrophy is a prevalent condition among women worldwide, which can affect different aspects of their quality of life. The physical and emotional impact of breast hypertrophy may harm daily activities, including work. To assess the impact of reduction mammaplasty on the ability to work and productivity of women with breast hypertrophy. A total of 60 patients with breast hypertrophy, already scheduled for breast reduction, aged 18 to 60 years and who had formal or autonomous employment were prospectively enrolled. The Brazilian versions of two validated tools, Work Productivity and Activity Impairment - General Health (WPAI-GH) and Work Limitations Questionnaire (WLQ) were self-administered at the preoperative evaluation and six months following surgery. The median age was 33 years, median body mass index was 24 kg/m 2 , and the median total weight of resected breast tissue was 617.5 g. According to the Brazilian classification of occupation, most patients (53%) had technical, scientific, artistic and similar occupations. There was a significant improvement in work capacity and productivity six months after the reduction mammaplasty, denoted by a decrease in presenteeism, absenteeism, and WLQ Productivity Loss Score (Wilcoxon analysis of variance: P work capacity and productivity of Brazilian women with breast hypertrophy. LEVEL OF EVIDENCE 4. © 2016 The American Society for Aesthetic Plastic Surgery, Inc. Reprints and permission: journals.permissions@oup.com.

Developing a Personnel Capacity Indicator for a high turnover Cartographic Production Sector

Science.gov (United States)

Mandarino, Flávia; Pessôa, Leonardo A. M.

2018-05-01

This paper describes a framework for development of an indicator for human re-sources capacity management in a military organization responsible for nautical chart production. Graphic chart for the results of the model COPPE-COSENZA (Cosenza et al. 2015) is used to properly present the personnel capacity within a high people turnover environment. The specific skills for the nautical charts production allied to the turnover rate require continuous and adequate personnel in-corporation and a capacity building through education and on-the-job training. The adopted approach for the study establishes quantitative values to fulfill quality requirements, and also presents graphically a profile for the human resources on a specific job to facilitate diagnosis and corrective actions.

Capacity of a quantum memory channel correlated by matrix product states

Science.gov (United States)

Mulherkar, Jaideep; Sunitha, V.

2018-04-01

We study the capacity of a quantum channel where channel acts like controlled phase gate with the control being provided by a one-dimensional quantum spin chain environment. Due to the correlations in the spin chain, we get a quantum channel with memory. We derive formulas for the quantum capacity of this channel when the spin state is a matrix product state. Particularly, we derive exact formulas for the capacity of the quantum memory channel when the environment state is the ground state of the AKLT model and the Majumdar-Ghosh model. We find that the behavior of the capacity for the range of the parameters is analytic.

Modelling ramp-up curves to reflect learning: improving capacity planning in secondary pharmaceutical production

DEFF Research Database (Denmark)

Hansen, Klaus Reinholdt Nyhuus; Grunow, Martin

2015-01-01

availability at market launch is ensured. Our MILP model is applied to a real industry case study using three empirically observed ramp-up curves to demonstrate its value as decision support tool. We demonstrate the superiority of our volume-dependent method over the traditional time-dependent ramp......The experience gained during production ramp-up leads to an increase of the effective production capacity over time. However, full utilisation of production capacity is not always possible during ramp-up. In such cases, the experience gained and hence the available effective capacity...... are overestimated. We develop a new method, which captures ramp-up as a function of the cumulative production volume to better reflect the experience gained while producing the new product. The use of the more accurate and computationally effective approach is demonstrated for the case of secondary pharmaceutical...

Phytochemical composition and antioxidant capacity of whole wheat products

Science.gov (United States)

Whole wheat contains an array of phytochemicals. We quantified alkylresorcinols (AR), phenolic acids, phytosterols, and tocols in six whole wheat products and characterized their antioxidant capacity and ability to induce quinone reductase activity (QR). Total AR content ranged from 136.8 to 233.9 m...

Soft wheat and flour products methods review: solvent retention capacity equation correction

Science.gov (United States)

This article discusses the results of a significant change to calculations made within AACCI Approved methods 56-10 and 56-11, the Alkaline Water Retention Capacity (AWRC) test and the Solvent Retention Capacity (SRC) test. The AACCI Soft Wheat and Flour Products Technical Committee reviewed propos...

Plant Design Nuclear Fuel Element Production Capacity Optimization to Support Nuclear Power Plant in Indonesia

International Nuclear Information System (INIS)

Bambang Galung Susanto

2007-01-01

The optimization production capacity for designing nuclear fuel element fabrication plant in Indonesia to support the nuclear power plant has been done. From calculation and by assuming that nuclear power plant to be built in Indonesia as much as 12 NPP and having capacity each 1000 MW, the optimum capacity for nuclear fuel element fabrication plant is 710 ton UO 2 /year. The optimum capacity production selected, has considered some aspects such as fraction batch (cycle, n = 3), length of cycle (18 months), discharge burn-up value (Bd) 35,000 up 50,000 MWD/ton U, enriched uranium to be used in the NPP (3.22 % to 4.51 %), future market development for fuel element, and the trend of capacity production selected by advances country to built nuclear fuel element fabrication plant type of PWR. (author)

Enhanced production of biomass, pigments and antioxidant capacity of a nutritionally important cyanobacterium Nostochopsis lobatus.

Science.gov (United States)

Pandey, Usha; Pandey, J

2008-07-01

A diazotrophic cyanobacterium Nostochopsis lobatus was evaluated for enhanced production of biomass, pigments and antioxidant capacity. N. lobatus showed potentially high antioxidant capacity (46.12 microM AEAC) with significant improvement under immobilized cell cultures (87.05 microM AEAC). When a mixture of P and Fe was supplemented, biomass, pigments, nutritive value and antioxidant capacity increased substantially at pH 7.8. When considered separately, P appeared to be a better supplement than Fe for the production of biomass, chlorophyll and carotenoids. However, for phycocyanin, phycoerythrin, nutritive value and antioxidant capacity, Fe appeared more effective than P. Our study indicates N. lobatus to be a promising bioresource for enhanced production of nutritionally rich biomass, pigments and antioxidants. The study also suggests that P and Fe are potentially effective supplements for scale-up production for commercial application.

Production capacity of metallurgical enterprises in modular structure of management accounting

Directory of Open Access Journals (Sweden)

Zambrzhitskaia E.S.

2017-01-01

Full Text Available This article is the result of constant research in development of management accounting at modern Russian metallurgical works. The required steps of renovation are presented for the modernization of management accounting system in the case of production capacity. The necessary factors with defined values are systematized for modern enterprises. The main ones are those which are regulate the measure of the payload of production capacity. For the purposes of effective management accounting at metallurgical enterprises it is suggested to use the system of controlling parameters which were formulated for the enterprise for production of rolls. Later in the article the necessary changes to the modular structure of management accounting business are described and expanded with new structural element – “Management of production capacity”. The suggested methodical approach will allow the company management to respond quickly to rapidly changing external environment and, as a consequence, to make effective management decisions.

Criterion III: Maintenance of rangeland productive capacity [Chapter 4

Science.gov (United States)

G. R. Evans; R. A. Washmgton-Allen; R. D. Child; J. E. Mitchell; B. R. Bobowskl; R. V. Loper; B. H. Allen-Diaz; D. W. Thompson; G. R. Welling; T. B. Reuwsaat

2010-01-01

Maintenance of rangeland productive capacity is one of five criteria established by the Sustainable Rangelands Roundtable (SRR) to monitor and assess rangeland sustainable management. Within this criterion, six indicators were developed through the Delphi Process and the expert opinions of academicians, rangeland scientists, rangeland management agency personnel, non-...

Alluvial Diamond Resource Potential and Production Capacity Assessment of Ghana

Science.gov (United States)

Chirico, Peter G.; Malpeli, Katherine C.; Anum, Solomon; Phillips, Emily C.

2010-01-01

In May of 2000, a meeting was convened in Kimberley, South Africa, and attended by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that rough, exported diamonds were free of conflictual concerns. This meeting was supported later in 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberley Process Certification Scheme (KPCS) was ratified and signed by both diamond-producing and diamond-importing countries. Over 70 countries were included as members at the end of 2007. To prevent trade in 'conflict' diamonds while protecting legitimate trade, the KPCS requires that each country set up an internal system of controls to prevent conflict diamonds from entering any imported or exported shipments of rough diamonds. Every diamond or diamond shipment must be accompanied by a Kimberley Process (KP) certificate and be contained in tamper-proof packaging. The objective of this study was to assess the alluvial diamond resource endowment and current production capacity of the alluvial diamond-mining sector in Ghana. A modified volume and grade methodology was used to estimate the remaining diamond reserves within the Birim and Bonsa diamond fields. The production capacity of the sector was estimated using a formulaic expression of the number of workers reported in the sector, their productivity, and the average grade of deposits mined. This study estimates that there are approximately 91,600,000 carats of alluvial diamonds remaining in both the Birim and Bonsa diamond fields: 89,000,000 carats in the Birim and 2,600,000 carats in the Bonsa. Production capacity is calculated to be 765,000 carats per year, based on the formula used and available data on the number of workers and worker productivity. Annual production is highly dependent on the international diamond market and prices, the numbers of seasonal workers actively mining in the sector, and

Multiple energy supply risks, optimal reserves, and optimal domestic production capacities

International Nuclear Information System (INIS)

Zweifel, P.; Ferrari, M.

1992-01-01

This study starts from the observation that today's Western trading nations are exposed to multiple risks of energy supplies, e.g. simultaneous shortage of oil and electricity supplies. To cope with these risks, oil can be stockpiled as well as domestic capacity for power production built up. Adopting the viewpoint of a policy maker who aims at minimizing the expected cost of security of supply, optimal simultaneous adjustments of oil stocks and electric production capacities to exogenous changes such as economic growth are derived. Against this benchmark, one-dimensional rules such as 'oil reserves for 90 days' turn out to be not only suboptimal but also to foster adjustments that exacerbate suboptimality. 9 refs., 1 tabs

Transportation and Production Lot-size for Sugarcane under Uncertainty of Machine Capacity

Directory of Open Access Journals (Sweden)

Sudtachat Kanchala

2018-01-01

Full Text Available The integrated transportation and production lot size problems is important effect to total cost of operation system for sugar factories. In this research, we formulate a mathematic model that combines these two problems as two stage stochastic programming model. In the first stage, we determine the lot size of transportation problem and allocate a fixed number of vehicles to transport sugarcane to the mill factory. Moreover, we consider an uncertainty of machine (mill capacities. After machine (mill capacities realized, in the second stage we determine the production lot size and make decision to hold units of sugarcane in front of mills based on discrete random variables of machine (mill capacities. We investigate the model using a small size problem. The results show that the optimal solutions try to choose closest fields and lower holding cost per unit (at fields to transport sugarcane to mill factory. We show the results of comparison of our model and the worst case model (full capacity. The results show that our model provides better efficiency than the results of the worst case model.

Do enhanced states exist? Boosting cognitive capacities through an action video-game.

Science.gov (United States)

Kozhevnikov, Maria; Li, Yahui; Wong, Sabrina; Obana, Takashi; Amihai, Ido

2018-04-01

This research reports the existence of enhanced cognitive states in which dramatic temporary improvements in temporal and spatial aspects of attention were exhibited by participants who played (but not by those who merely observed) action video-games meeting certain criteria. Specifically, Experiments 1 and 2 demonstrate that the attentional improvements were exhibited only by participants whose skills matched the difficulty level of the video game. Experiment 2 showed that arousal (as reflected by the reduction in parasympathetic activity and increase in sympathetic activity) is a critical physiological condition for enhanced cognitive states and corresponding attentional enhancements. Experiment 3 showed that the cognitive enhancements were transient, and were no longer observed after 30 min of rest following video-gaming. Moreover, the results suggest that the enhancements were specific to tasks requiring visual-spatial focused attention, but not distribution of spatial attention as has been reported to improve significantly and durably as a result of long-term video-game playing. Overall, the results suggest that the observed enhancements cannot be simply due to the activity of video-gaming per se, but might rather represent an enhanced cognitive state resulting from specific conditions (heightened arousal in combination with active engagement and optimal challenge), resonant with what has been described in previous phenomenological literature as "flow" (Csikszentmihalyi, 1975) or "peak experiences" (Maslov, 1962). The findings provide empirical evidence for the existence of the enhanced cognitive states and suggest possibilities for consciously accessing latent resources of our brain to temporarily boost our cognitive capacities upon demand. Copyright © 2018 Elsevier B.V. All rights reserved.

Existing Steel Railway Bridges Evaluation

Science.gov (United States)

Vičan, Josef; Gocál, Jozef; Odrobiňák, Jaroslav; Koteš, Peter

2016-12-01

The article describes general principles and basis of evaluation of existing railway bridges based on the concept of load-carrying capacity determination. Compared to the design of a new bridge, the modified reliability level for existing bridges evaluation should be considered due to implementation of the additional data related to bridge condition and behaviour obtained from regular inspections. Based on those data respecting the bridge remaining lifetime, a modification of partial safety factors for actions and materials could be respected in the bridge evaluation process. A great attention is also paid to the specific problems of determination of load-caring capacity of steel railway bridges in service. Recommendation for global analysis and methodology for existing steel bridge superstructure load-carrying capacity determination are described too.

A Method of Flow-Shop Re-Scheduling Dealing with Variation of Productive Capacity

Directory of Open Access Journals (Sweden)

Kenzo KURIHARA

2005-02-01

Full Text Available We can make optimum scheduling results using various methods that are proposed by many researchers. However, it is very difficult to process the works on time without delaying the schedule. There are two major causes that disturb the planned optimum schedules; they are (1the variation of productive capacity, and (2the variation of products' quantities themselves. In this paper, we deal with the former variation, or productive capacities, at flow-shop works. When production machines in a shop go out of order at flow-shops, we cannot continue to operate the productions and we have to stop the production line. To the contrary, we can continue to operate the shops even if some workers absent themselves. Of course, in this case, the production capacities become lower, because workers need to move from a machine to another to overcome the shortage of workers and some shops cannot be operated because of the worker shortage. We developed a new re-scheduling method based on Branch-and Bound method. We proposed an equation for calculating the lower bound for our Branch-and Bound method in a practical time. Some evaluation experiments are done using practical data of real flow-shop works. We compared our results with those of another simple scheduling method, and we confirmed the total production time of our result is shorter than that of another method by 4%.

Natural gas productive capacity for the lower 48 states 1984 through 1996, February 1996

International Nuclear Information System (INIS)

1996-01-01

This is the fourth wellhead productive capacity report. The three previous ones were published in 1991, 1993, and 1994. This report should be of particular interest to those in Congress, Federal and State agencies, industry, and the academic community, who are concerned with the future availability of natural gas. The EIA Dallas Field Office has prepared five earlier reports regarding natural gas productive capacity. These reports, Gas Deliverability and Flow Capacity of Surveillance Fields, reported deliverability and capacity data for selected gas fields in major gas producing areas. The data in the reports were based on gas-well back-pressure tests and estimates of gas-in-place for each field or reservoir. These reports use proven well testing theory, most of which has been employed by industry since 1936 when the Bureau of Mines first published Monograph 7. Demand for natural gas in the United States is met by a combination of natural gas production, underground gas storage, imported gas, and supplemental gaseous fuels. Natural gas production requirements in the lower 48 States have been increasing during the last few years while drilling has remained at low levels. This has raised some concern about the adequacy of future gas supplies, especially in periods of peak heating or cooling demand. The purpose of this report is to address these concerns by presenting a 3-year projection of the total productive capacity of natural gas at the wellhead for the lower 48 States. Alaska is excluded because Alaskan gas does not enter the lower-48 States pipeline system. The Energy Information Administration (EIA) generates this 3-year projection based on historical gas-well drilling and production data from State, Federal, and private sources. In addition to conventional gas-well gas, coalbed gas and oil-well gas are also included

Implementation plan for the new production reactor capacity environmental impact statement

International Nuclear Information System (INIS)

1989-12-01

The US Department of Energy (DOE) proposed to site, construct, and operate new production reactor (NPR) capacity intended primarily to produce tritium and secondarily to produce plutonium for the US nuclear weapons program. DOE studies show that this new capacity is needed to ensure reliable maintenance of the nation's nuclear weapons stockpile. It also is essential that these necessary nuclear materials be produced in a safe and environmentally sound manner. The DOE has determined that this proposed action constitutes a major federal action that may significantly affect the quality of the human environment; therefore, the DOE will prepare an environmental impact statement (EIS) to assess the potential impacts of the proposed action and reasonable alternatives on the human and natural environment. The EIS will be prepared in accordance with the National Environmental Policy Act of 1969, as implemented in regulations promulgated by the Council on Environmental Quality (CEQ). This EIS implementation plan (IP) includes a description of the proposed action, descriptions of alternatives, a summary of EIS assumptions, a list of environmental issues to be considered in the EIS (including those identified during public scoping activities), a list of proposed agency consultations, a schedule for EIS preparation and related activities, and an annotated outline for the EIS. It is the Department's intent that the EIS on the NPR capacity will serve as the programmatic National Environmental Policy Act (NEPA) review of modernization of DOE defense nuclear materials production of tritium and plutonium. The Department is currently developing a NEPA compliance strategy for modernization of the remainder of the nuclear weapons production complex, which will reference the EIS on NPR capacity. 7 refs., 8 tabs

Assessing refinery capacity and readiness to take Canadian product : is Canadian crude pushing or pulling?

International Nuclear Information System (INIS)

Friesner, J.M.

2005-01-01

This presentation addressed some of the challenges facing oil sands production in Canada. Refinery products and refining investments were discussed, as was the impact of alternative crude supply on the markets and pricing of oil sands. The oils sands products discussed include various qualities of sweet synthetic crude oil produced via upgraders; virgin and cracked intermediate products from oil sands upgraders; mined or Steam Assisted Gravity Drainage (SAGD) produced bitumen blended products; and synthetic heavy crude produced via hydrocracking. Products were listed in terms of ease of production, and a rationale for generic ranking was provided. A chart of 2003 characteristics of non-Canadian imports to the mid-west United States was provided. Various marketing strategies for different oil sands products were discussed, as well as issues concerning logistics. Strategies for the development of a bigger market include producer investment in refining capability; the acquisition of refining assets; investment in refiners' upgrading capability; and securing a long term supply deal. Core and extended markets for Western Canadian oil sands products were reviewed. A chart of North American refining capacity was presented. Details of a refinery with both coking and cracking capacity were examined. An increase in hydro processing capacity and expanded coking capacity, as well as an upgrade of metallurgy were suggested as possible upgrading options. Various refinery configurations were discussed in relation to lower cost feedstocks and clean fuels specifications. Issues concerning crude supply were examined with reference to pricing parity points and declines in traditional crude production. Specific supply issues concerning oil sands production were discussed, including transportation costs; adequate refining capacity; and availability of supply. Various logistic investments were considered. A map of BP's 5 U.S. refineries was presented. A forecast of expected changes in

Existing Steel Railway Bridges Evaluation

Directory of Open Access Journals (Sweden)

Vičan Josef

2016-12-01

Full Text Available The article describes general principles and basis of evaluation of existing railway bridges based on the concept of load-carrying capacity determination. Compared to the design of a new bridge, the modified reliability level for existing bridges evaluation should be considered due to implementation of the additional data related to bridge condition and behaviour obtained from regular inspections. Based on those data respecting the bridge remaining lifetime, a modification of partial safety factors for actions and materials could be respected in the bridge evaluation process. A great attention is also paid to the specific problems of determination of load-caring capacity of steel railway bridges in service. Recommendation for global analysis and methodology for existing steel bridge superstructure load-carrying capacity determination are described too.

Capacity-coupled multidischarge for atmospheric plasma production

International Nuclear Information System (INIS)

Mase, Hiroshi; Fujiwara, Tamiya; Sato, Noriyoshi

2003-01-01

We propose a method of plasma production by capacity-coupled multidischarge (CCMD) at atmospheric pressure. The discharge gaps in the CCMD consist of a common electrode and a number of compact electrodes (CCE) which are directly coupled with small capacitors for quenching the discharge. A simple CCE structure is provided by a cylindrical capacitor, the inner conductor of which is used as a gap electrode. A short pulse discharge is observed to appear homogeneously at each CCE. A charge transfer for the single-pulsed discharge is 10-100 times as large as that of the conventional dielectric barrier discharge. A high efficiency of ozone production has been confirmed in the CCMD using O 2 gas. A device configuration of the CCMD is quite flexible with respect to its geometrical shape and size. The CCMD could be used to produce plasmas for various kinds of industrial applications at atmospheric pressure

Uranium from Coal Ash: Resource Assessment and Outlook on Production Capacities

International Nuclear Information System (INIS)

Monnet, Antoine

2014-01-01

Conclusion: Uranium production from coal-ash is technically feasible: in some situations, it could reach commercial development, in such case, fast lead time will be a plus. Technically accessible resources are significant (1.1 to 4.5 MtU). Yet most of those are low grade. Potential reserves don’t exceed 200 ktU (cut-off grade = 200 ppm). • By-product uranium production => constrained production capacities; • Realistic production potential < 700 tU/year; • ~ 1% of current needs. → Coal ash will not be a significant source of uranium for the 21st century – even if production constrains are released (increase in coal consumption

12 CFR 7.5004 - Sale of excess electronic capacity and by-products.

Science.gov (United States)

2010-01-01

... bank's needs for banking purposes include: (1) Data processing services; (2) Production and... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Sale of excess electronic capacity and by-products. 7.5004 Section 7.5004 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY...

Technical and institutional capacity in local organisations to manage ...

African Journals Online (AJOL)

Technical and institutional capacity in local organisations to manage decentralised forest resources in Uganda. ... Southern Forests: a Journal of Forest Science ... to implement decentralised forest governance exists in local organisations through partnerships with other actors in the productive use of the available resources.

Comparison of bee products based on assays of antioxidant capacities.

Science.gov (United States)

Nakajima, Yoshimi; Tsuruma, Kazuhiro; Shimazawa, Masamitsu; Mishima, Satoshi; Hara, Hideaki

2009-02-26

Bee products (including propolis, royal jelly, and bee pollen) are popular, traditional health foods. We compared antioxidant effects among water and ethanol extracts of Brazilian green propolis (WEP or EEP), its main constituents, water-soluble royal jelly (RJ), and an ethanol extract of bee pollen. The hydrogen peroxide (H2O2)-, superoxide anion (O2.-)-, and hydroxyl radical (HO.)- scavenging capacities of bee products were measured using antioxidant capacity assays that employed the reactive oxygen species (ROS)-sensitive probe 5-(and-6)-chloromethyl-2',7'-dichlorodihydrofluorescein diacetate, acetyl ester (CM-H2DCFDA) or aminophenyl fluorescein (APF). The rank order of antioxidant potencies was as follows: WEP > EEP > pollen, but neither RJ nor 10-hydroxy-2-decenoic acid (10-HDA) had any effects. Concerning the main constituents of WEP, the rank order of antioxidant effects was: caffeic acid > artepillin C > drupanin, but neither baccharin nor coumaric acid had any effects. The scavenging effects of caffeic acid were as powerful as those of trolox, but stronger than those of N-acetyl cysteine (NAC) or vitamin C. On the basis of the present assays, propolis is the most powerful antioxidant of all the bee product examined, and its effect may be partly due to the various caffeic acids it contains. Pollen, too, exhibited strong antioxidant effects.

Polynomial Time Algorithms For Some Multi-Level Lot-Sizing Problems With Production Capacities

NARCIS (Netherlands)

S. van Hoesel (Stan); H.E. Romeijn (Edwin); D. Romero Morales (Dolores); A.P.M. Wagelmans (Albert)

2002-01-01

textabstractWe consider a model for a serial supply chain in which production, inventory, and transportation decisions are integrated, in the presence of production capacities and for different transportation cost functions. The model we study is a generalization of the traditional single-item

Analysis of supply chain, scale factor, and optimum plant capacity for the production of ethanol from corn stover

International Nuclear Information System (INIS)

Leboreiro, Jose; Hilaly, Ahmad K.

2013-01-01

A detailed model is used to perform a thorough analysis on ethanol production from corn stover via the dilute acid process. The biomass supply chain cost model accounts for all steps needed to source corn stover including collection, transportation, and storage. The manufacturing cost model is based on work done at NREL; attainable conversions of key process parameters are used to calculate production cost. The choice of capital investment scaling function and scaling parameter has a significant impact on the optimum plant capacity. For the widely used exponential function, the scaling factors are functions of plant capacity. The pre-exponential factor decreases with increasing plant capacity while the exponential factor increases as the plant capacity increases. The use of scaling parameters calculated for small plant capacities leads to falsely large optimum plants; data from a wide range of plant capacities is required to produce accurate results. A mathematical expression to scale capital investment for fermentation-based biorefineries is proposed which accounts for the linear scaling behavior of bio-reactors (such as saccharification vessels and fermentors) as well as the exponential nature of all other plant equipment. Ignoring the linear scaling behavior of bio-reactors leads to artificially large optimum plant capacities. The minimum production cost is found to be in the range of 789–830 $ m −3 which is significantly higher than previously reported. Optimum plant capacities are in the range of 5750–9850 Mg d −1 . The optimum plant capacity and production cost are highly sensitive to farmer participation in biomass harvest for low participation rates. -- Highlights: •A detailed model is used to perform a technoeconomic analysis for the production of ethanol from corn stover. •The capital investment scaling factors were found to be a function of plant capacity. •Bio-reactors (such as saccharification vessels and fermentors) in large size

Absorptive capacity, technological innovation, and product life cycle: a system dynamics model.

Science.gov (United States)

Zou, Bo; Guo, Feng; Guo, Jinyu

2016-01-01

While past research has recognized the importance of the dynamic nature of absorptive capacity, there is limited knowledge on how to generate a fair and comprehensive analytical framework. Based on interviews with 24 Chinese firms, this study develops a system-dynamics model that incorporates an important feedback loop among absorptive capacity, technological innovation, and product life cycle (PLC). The simulation results reveal that (1) PLC affects the dynamic process of absorptive capacity; (2) the absorptive capacity of a firm peaks in the growth stage of PLC, and (3) the market demand at different PLC stages is the main driving force in firms' technological innovations. This study also explores a sensitivity simulation using the variables of (1) time spent in founding an external knowledge network, (2) research and development period, and (3) knowledge diversity. The sensitivity simulation results show that the changes of these three variables have a greater impact on absorptive capacity and technological innovation during growth and maturity stages than in the introduction and declining stages of PLC. We provide suggestions on how firms can adjust management policies to improve their absorptive capacity and technological innovation performance during different PLC stages.

On the Optimal Policy for the Single-product Inventory Problem with Set-up Cost and a Restricted Production Capacity

NARCIS (Netherlands)

Foreest, N. D. van; Wijngaard, J.

2010-01-01

The single-product, stationary inventory problem with set-up cost is one of the classical problems in stochastic operations research. Theories have been developed to cope with finite production capacity in periodic review systems, and it has been proved that optimal policies for these cases are not

Antioxidant Capacity Determination in Plants and Plant-Derived Products: A Review

Science.gov (United States)

Pop, Aneta; Cimpeanu, Carmen; Predoi, Gabriel

2016-01-01

The present paper aims at reviewing and commenting on the analytical methods applied to antioxidant and antioxidant capacity assessment in plant-derived products. Aspects related to oxidative stress, reactive oxidative species' influence on key biomolecules, and antioxidant benefits and modalities of action are discussed. Also, the oxidant-antioxidant balance is critically discussed. The conventional and nonconventional extraction procedures applied prior to analysis are also presented, as the extraction step is of pivotal importance for isolation and concentration of the compound(s) of interest before analysis. Then, the chromatographic, spectrometric, and electrochemical methods for antioxidant and antioxidant capacity determination in plant-derived products are detailed with respect to their principles, characteristics, and specific applications. Peculiarities related to the matrix characteristics and other factors influencing the method's performances are discussed. Health benefits of plants and derived products are described, as indicated in the original source. Finally, critical and conclusive aspects are given when it comes to the choice of a particular extraction procedure and detection method, which should consider the nature of the sample, prevalent antioxidant/antioxidant class, and the mechanism underlying each technique. Advantages and disadvantages are discussed for each method. PMID:28044094

An assessment of The Capacity Drops at The Bottleneck Segments: A review on the existing methodologies

Directory of Open Access Journals (Sweden)

Sugiarto Sugiarto

2015-08-01

Full Text Available The term of capacity is very useful to quantify the ability of transport facilities in terms of carrying traffic. The capacity of the road is an essential ingredient in the planning, design, and operation of roadways. It is desirable for traffic analyst to be able to predict the time and places where congestion will occur and the volumes to be expected. Most of urbanized areas have been experiencing of traffic congestion problems particularly at urban arterial systems. High traffic demand and limited supply of roadways are always the main factors produced traffic congestion. However, there are other sources of local and temporal congestion, such as uncontrolled access point, median opening and on-street parking activities, which are caused a reduction of roadway capacity during peak operations. Those locations could result in reduction of travel speed and road, as known as hidden bottlenecks. This is bottleneck which is without any changes in geometric of the segments. The Indonesian Highway Capacity Manual (IHCM, 1997 is used to assess urban arterial systems till current days. IHCM provides a static method for examining the capacityand does not systematically take into account of bottleneck activities. However, bottleneck activities create interruption smooth traffic flow along arterial streets, which in turns stimulate related problems, such as, excessive air pollution, additional energy consumption and driver’s frustration due to traffic jammed. This condition could happen simultaneously; mostly repetitive and predictable in same peak hour demands. Therefore, this paper carefully summarize on the existing methodologies considering required data, handled data processing and expected output of each proposed of analysis. We further notice that dynamic approach could be more appropriated for analyzing temporal congestion segments (median opening, on street parking, etc.. Method of oblique cumulative plot seems to be more applicable in terms of

Production capacity of equipment for medium and large hydroelectric power plant in China

Energy Technology Data Exchange (ETDEWEB)

Huang Shenyang [Ministry of Electric Power, Beijing (China). Bureau of Electric Power Machinery

1995-07-01

This document presents an overview on the production capacity of equipment for medium and large hydroelectric power plant in China. The document approaches general aspects, production capability and testing facilities related to Francis, Kaplan, tubular and impulse hydroelectric generating sets, and the introduction of main manufacturers as well.

Comparison of bee products based on assays of antioxidant capacities

Directory of Open Access Journals (Sweden)

Mishima Satoshi

2009-02-01

Full Text Available Abstract Background Bee products (including propolis, royal jelly, and bee pollen are popular, traditional health foods. We compared antioxidant effects among water and ethanol extracts of Brazilian green propolis (WEP or EEP, its main constituents, water-soluble royal jelly (RJ, and an ethanol extract of bee pollen. Methods The hydrogen peroxide (H2O2-, superoxide anion (O2·--, and hydroxyl radical (HO·- scavenging capacities of bee products were measured using antioxidant capacity assays that employed the reactive oxygen species (ROS-sensitive probe 5-(and-6-chloromethyl-2',7'-dichlorodihydrofluorescein diacetate, acetyl ester (CM-H2DCFDA or aminophenyl fluorescein (APF. Results The rank order of antioxidant potencies was as follows: WEP > EEP > pollen, but neither RJ nor 10-hydroxy-2-decenoic acid (10-HDA had any effects. Concerning the main constituents of WEP, the rank order of antioxidant effects was: caffeic acid > artepillin C > drupanin, but neither baccharin nor coumaric acid had any effects. The scavenging effects of caffeic acid were as powerful as those of trolox, but stronger than those of N-acetyl cysteine (NAC or vitamin C. Conclusion On the basis of the present assays, propolis is the most powerful antioxidant of all the bee product examined, and its effect may be partly due to the various caffeic acids it contains. Pollen, too, exhibited strong antioxidant effects.

Production capacity as a remedy for profit generator A capacidade de produção como recurso gerador de ganhos

Directory of Open Access Journals (Sweden)

Norberto Tamborlin

2013-03-01

Full Text Available The gradual growth of the flexography market generates different expectations in organizations of this segment. To ensure the fulfillment of the demand and ensure its market share, it is important to know the real productive capacity of its plant. The research aimed to identify the capacity of the sector recording a stereotype workshop the city of Blumenau/SC. Was defined as qualitative research, objective descriptive and as in the investigation, the research is characterized as action research. Data were collected from the daily monitoring of the processes performed in the recording industry, observing the development of activities, recording information in reports and informal interviews with employees. Thus, the data were triangulated and presented in tables and figures. The results of this investigation was identified the bottleneck of production as well as the existence of hours shutdowns for lack of service, and made ​​suggestions to optimize production capacity, as well as strategies to increase earnings.O crescimento gradativo do mercado de flexografia gera diversas expectativas nas organizações deste segmento. Para garantir o atendimento da demanda e garantir a sua fatia de mercado, é importante conhecer a real capacidade produtiva da sua unidade de produção. A pesquisa teve como objetivo identificar a capacidade de produção do setor de gravação de uma clicheria da cidade de Blumenau/SC. Foi definida como pesquisa qualitativa, de objetivo descritivo e quanto aos procedimentos de investigação, a pesquisa se caracterizou como pesquisa-ação. Os dados foram coletados a partir do acompanhamento diário dos processos realizados no setor de gravação, observação do desenvolvimento das atividades, registro das informações em relatórios e entrevistas informais com os funcionários. Dessa forma, os dados obtidos foram triangulados e apresentados em figuras e tabelas. Como resultados desta investigação, foi identificado o

Land Potential Productivity and Population Carrying Capacity of Yan’an City

OpenAIRE

Liu, Xiaoling; Zhang, Wei

2013-01-01

The productivity attenuation method is adopted to calculate land potential productivity of counties of Yan’an City and calculate population carrying capacity at current productivity level. Rsults shows that high photosynthetic potential productivity area and high light and temperature potential productivity area are mainly situated in the north, while high climatic potential area and high land potential productivity area are mainly concentrated in the south. From solar radiation, moisture a...

PERHITUNGAN IDLE CAPACITY DENGAN MENGGUNAKAN CAM-I CAPACITY MODEL DALAM RANGKA EFISIENSI BIAYA PADA PT X

Directory of Open Access Journals (Sweden)

Muammar Aditya

2015-09-01

Full Text Available Aim for this research are to analyze capacity cost which incure from company production machines and human resources whose operate the production machine using CAM-I capacity model. CAM-I capacity model is an approach which focus  upon how to manage company resources. This research initiated at PT X which focus to production activity that used small mixer machine, extruder machine, oven drying machine, enrober machine, pan coting machine which consist of hot and cold pan coating machine, and packing machine which consist of vertical packing machine and horizontal packing machine as well as human resources that operates those machine. This research focus on rate capacity, productive capacity, idle capacity, and nonproductive capacity to measure capacity cost. Result of this research shows most of the capacity owned by either by production machine or human resources are not utilized to its maximum potential. There are need to reduce capacity cost owned by production machine and human resoures to increase the product sales but if its unachieveable there will be need to increase efficiency from production machine and human resources by reducing their quantityDOI: 10.15408/ess.v4i1.1961

Increasing transmission capacity : case studies and techniques

Energy Technology Data Exchange (ETDEWEB)

Reisdorff, R.A. [Laminated Wood Systems, NE (United States)

2007-07-01

Many companies are stretching the capacities of their mature transmission lines as a result of deregulation in the electric utility industry. Since electric utilities are no longer in control of new generation locations or capacities, their mission has changed from supplying electricity to regional customers to that of the movement of power over their grid. There will also be even more pressure to maximize the thermal capacity of existing transmission lines once the regional transmission operators (RTOs) are in place. Various methods including conductor replacement or increasing structure height are available options to accomplish this. This paper discussed the available methods to increase ground clearance, including structure changeouts; pole top extensions; nip and tuck conductor; adding mid-span structures; and raising structures. Because the actual cost of line outages for maintenance of rebuild work will make many present day work procedures obsolete, the industry is changing to methods of safely increasing the existing structure heights without removing the line from service. The paper also presented the Phaiseraiser product which is a patented system, consisting of double steel members that are either single or multiple piece units which are used to support the raised structure. The paper discussed the product development of the Phaiseraiser product, with reference to wood stubs; pier foundation; pole enforcer methodology; testing; designs; and ordering requirements. Last, the paper discussed a custom designed installation tool package developed by Laminated Wood Systems (LWS); LWS structural analysis; estimated cost for Phaiseraiser installation on an h-frame; labor resources and training; maintenance considerations; completed Phaiseraiser projects; and a case study on the Omaha Public Power District. figs.

Maximizing Production Capacity from an Ultrafiltration Process at the Hanford Department of Waste Treatment Facility

International Nuclear Information System (INIS)

Foust, Henry C.; Holton, Langdon K.; Demick, Laurence E.

2005-01-01

The Department of Energy has contracted Bechtel National, Inc. to design, construct and commission a Waste Treatment and Immobilization Plant (WTP) to treat radioactive slurry currently stored in underground waste storage tanks. A critical element of the waste treatment capacity for the WTP is the proper operation of an ultrafiltration process (UFP). The UFP separates supernate solution from radioactive solids. The solution and solid phases are separately immobilized. An oversight review of the UFP design and operation has identified several methods to improve the capacity of the ultrafiltration process, which will also improve the capacity of the WTP. Areas explored were the basis of design, an analysis of the WTP capacity, process chemistry within the UFP, and UFP process control. This article discusses some of the findings of this oversight review in terms of sodium and solid production, which supports the treatment of low activity waste (LAW) associated with the facility, and solid production, which supports the treatment of high level waste (HLW) associated with the facility

Farmers' management capacities as a success factor in agriculture: A review

Directory of Open Access Journals (Sweden)

Vukelić Nataša

2014-01-01

Full Text Available Farms operating under more or less similar environmental and socio-economic conditions often reflect significant differences in production and economic results they achieve. Such differences are most commonly attributed to: biological factors, the level of specialization, the intensity of production, the size of farms and/or implemented production practice, etc. It is considered that the differences in achieved results, that is, the success of a farm can be, to a large extent, explained by variations in farmers' management capacities. Management capacities can be defined as possession of appropriate personal characteristics and capabilities of farmers (managers to cope with specific problems and opportunities at the right time and in the right way. With the changes taking place within the modern agricultural production, it is becoming more and more difficult to maintain competitive advantages, thus the farmers are progressively confronted with the requirements for certain management capacities which will enable them to take advantage of the existing conditions in the best possible way, i.e. to choose and implement the optimal production practice. As the management capacities are rarely explicitly defined and quantified, particularly when it comes to agricultural producers, the aim of this study is to provide a review of the previous research in this field while highlighting the significance of these issues.

The impact of production capacity utilization on metallurgical companies financing

Directory of Open Access Journals (Sweden)

J. Kutáč

2013-01-01

Full Text Available The most important and the most problematic in-house sources of financing of metallurgical companies are profit and depreciations. In the event that the aggregate value of the economic result and depreciations goes over to negative values, then this kind of in-house financing ceases to increase Cash Flow of the company but, on the contrary, it will cause its reduction. It means that this type of financing is to some extent uncertain, particularly in times of crisis, when there are noticeable fluctuations in sales volumes, leading to a significant influence of the volume of production on the amount of profit. The article discusses the impact of production capacity utilization on metallurgical companies financing.

MILK PRODUCTIONS AT SERVAL FARM IN MURES DISTRICT, OBTAINED WITHIN THE EXISTING CONSTRUCTIVE SOLUTIONS

Directory of Open Access Journals (Sweden)

S. BOCA

2008-10-01

Full Text Available The paper present the research results performed at a farm of the Mures district, between 2005 and 2008, concerning the milk productions, obtained in the existing constructive solutions. The essential changes produced in the last decades, concerning the dairy cattle raising and exploitation technologies, food, reproduction and amelioration, at one time with the technique development witch allow the mechanization of some production processes, imposes, also, our intervention in the constructive variants of accommodation through the actual shelter modernization, existing in this farm.

The influence of capacity management on the unit cost of production: a case study in a flexible plastic packaging company

Directory of Open Access Journals (Sweden)

Tálita Floriano Goulart Silva

2013-08-01

Full Text Available This article presents the relationship between capacity management and cost management in determining the unit cost. The objective was to show how the use of effective capacity decreases the unit cost of manufacturing. For this, follow these steps: 1 Knowledge and analysis of production process and PPPC; 2 Data Collection; 3 Application of the Method Cost Center; 4Verification of the relationship between the Capacity Management and Cost Management. Through the company’s accounting reports, observations and interviews, the following results was possible: knowledge of the production process and functioning of PPCP, measuring the cost of each step of the production process and the unit cost of each product. Subsequently, we compared the unit cost using the effective capacity and normal capacity. The results showed that the unit costs decrease with the use of effective capacity, while increasing the margin for each product, even with the lower sale price, thus establishing a virtuous circle: effective capacity utilization, reduced unit cost, most competitive prices and increase in the number of requests.

Chinese refining capacity for Canadian heavy oil

International Nuclear Information System (INIS)

Bruce, G.W.

2006-01-01

This paper discussed China's refining capacity in relation to exports of Canadian heavy oil. Demand for oil is increasing throughout the world, and China is expected to consume 25 per cent of the projected yearly oil supplies. Alberta currently has an estimated 174 billion barrels of recoverable bitumen, and produces 1.06 million barrels per day. Production is expected to increase to 4.5 million barrels per day by the year 2020. Currently bitumen blends are refined and diluted with naphtha and sweet synthetic crude oil. Bitumen is a challenging feedstock for refineries, and requires thermal production methods or gasification processes. Primary conversion into sour synthetic crude is typically followed by hydrocracking and further refining into finished petroleum products. There are currently 50 refineries in China with a 7.4 million barrel per day capacity. Coastal refineries using imported crude oil have a 4 million barrel per day capacity. New facilities are being constructed and existing plants are being upgraded in order to process heavier and more sour crude oils. However, current refining capabilities in Chinese refineries have a limited ability for resid conversion. It was concluded that while China has a refining infrastructure, only refineries on the coast will use oil sands-derived feedstocks. However, there are currently opportunities to design refineries to match future feedstocks. tabs., figs

Urban food crop production capacity and competition with the urban forest

Science.gov (United States)

Jeffrey J Richardson; L. Monika Moskal

2016-01-01

The sourcing of food plays a significant role in assessing the sustainability of a city, but it is unclear how much food a city can produce within its city limits. In this study, we propose a method for estimating the maximum food crop production capacity of a city and demonstrate the method in Seattle, WA USA by taking into account land use, the light environment, and...

The petrochemical production capacity of the Saudi Arabian Basic Industry Corporation (SABIC)

International Nuclear Information System (INIS)

Anon.

1993-01-01

This paper describes the development program of the SABIC (Saudi Arabian Basic Industry Co.) which has provided the building of new petrochemical units while retrofitting old units or developing the capacities of some of them. Statistical data on petrochemical production, sales and exports, contracts and joint ventures are also given. 2 tabs

PAYMENT CAPACITY SENSITIVITY FACTORS

Directory of Open Access Journals (Sweden)

Daniel BRÎNDESCU – OLARIU

2014-11-01

The results of the study facilitate the determination and classification of the main sensitivity factors for the payment capacity at sample level, the establishment of general benchmarks for the payment capacity (as no such benchmarks currently exist in the Romanian literature and the identification of the mechanisms through which the variation of different factors impacts the payment capacity.

Procyanidin and catechin contents and antioxidant capacity of cocoa and chocolate products.

Science.gov (United States)

Gu, Liwei; House, Suzanne E; Wu, Xianli; Ou, Boxin; Prior, Ronald L

2006-05-31

Cocoa and chocolate products from major brands were analyzed blind for total antioxidant capacity (AOC) (lipophilic and hydrophilic ORAC(FL)), catechins, and procyanidins (monomer through polymers). Accuracy of analyses was ascertained by comparing analyses on a NIST standard reference chocolate with NIST certified values. Procyanidin (PC) content was related to the nonfat cocoa solid (NFCS) content. The natural cocoa powders (average 87% of NFCS) contained the highest levels of AOC (826 +/- 103 micromol of TE/g) and PCs (40.8 +/- 8.3 mg/g). Alkalized cocoa (Dutched powders, average 80% NFCS) contained lower AOC (402 +/- 6 micromol of TE /g) and PCs (8.9 +/- 2.7 mg/g). Unsweetened chocolates or chocolate liquor (50% NFCS) contained 496 +/- 40 micromol of TE /g of AOC and 22.3 +/- 2.9 mg/g of PCs. Milk chocolates, which contain the least amount of NFCS (7.1%), had the lowest concentrations of AOC (80 +/- 10 micromol of TE /g) and PCs (2.7 +/- 0.5 mg/g). One serving of cocoa (5 g) or chocolate (15 or 40 g, depending upon the type of chocolate) provides 2000-9100 micromol of TE of AOC and 45-517 mg of PCs, amounts that exceed the amount in a serving of the majority of foods consumed in America. The monomers through trimers, which are thought to be directly bioavailable, contributed 30% of the total PCs in chocolates. Hydrophilic antioxidant capacity contributed >90% of AOC in all products. The correlation coefficient between AOC and PCs in chocolates was 0.92, suggesting that PCs are the dominant antioxidants in cocoa and chocolates. These results indicate that NFCS is correlated with AOC and PC in cocoa and chocolate products. Alkalizing dramatically decreased both the procyanidin content and antioxidant capacity, although not to the same extent.

Pacific Basin Heavy Oil Refining Capacity

Directory of Open Access Journals (Sweden)

David Hackett

2013-02-01

Full Text Available The United States today is Canada’s largest customer for oil and refined oil products. However, this relationship may be strained due to physical, economic and political influences. Pipeline capacity is approaching its limits; Canadian oil is selling at substantive discounts to world market prices; and U.S. demand for crude oil and finished products (such as gasoline, has begun to flatten significantly relative to historical rates. Lower demand, combined with increased shale oil production, means U.S. demand for Canadian oil is expected to continue to decline. Under these circumstances, gaining access to new markets such as those in the Asia-Pacific region is becoming more and more important for the Canadian economy. However, expanding pipeline capacity to the Pacific via the proposed Northern Gateway pipeline and the planned Trans Mountain pipeline expansion is only feasible when there is sufficient demand and processing capacity to support Canadian crude blends. Canadian heavy oil requires more refining and produces less valuable end products than other lighter and sweeter blends. Canadian producers must compete with lighter, sweeter oils from the Middle East, and elsewhere, for a place in the Pacific Basin refineries built to handle heavy crude blends. Canadian oil sands producers are currently expanding production capacity. Once complete, the Northern Gateway pipeline and the Trans Mountain expansion are expected to deliver an additional 500,000 to 1.1 million barrels a day to tankers on the Pacific coast. Through this survey of the capacity of Pacific Basin refineries, including existing and proposed facilities, we have concluded that there is sufficient technical capacity in the Pacific Basin to refine the additional Canadian volume; however, there may be some modifications required to certain refineries to allow them to process Western Canadian crude. Any additional capacity for Canadian oil would require refinery modifications or

ADAPTIVE CAPACITIES OF FARMERS TO CLIMATE CHANGE ADAPTATION STRATEGIES AND THEIR EFFECTS ON RICE PRODUCTION IN THE NORTHERN REGION OF GHANA

Directory of Open Access Journals (Sweden)

Franklin Nantui Mabe

2012-11-01

Full Text Available This study estimated the adaptive capacities of farmers to climate change adaptation strategies and their effects on rice production in the Northern Region of Ghana. The adaptive capacities of rice farmers were estimated quantitatively and categorized into high, moderate and low adaptive capacities. Double logarithmic regression model of Cobb-Douglas production function was used to quantity the effects of adaptive capacities of farmers on rice production. On the average, the farmers interviewed are moderately adaptive to climate change. Also, high adaptive farmers obtain nine more bags of 50 kg bag of paddy rice than farmers with low adaptive capacities. Therefore, the more a farmer has the ability to adjust to climate change, the more the number of bags of rice he or she obtains. Rice farmers should be empowered through better extension services in order to attain high adaptive capacity status so as to help them obtain more rice output.

RDT&E Laboratory Capacity Utilization and Productivity Measurement Methods for Financial Decision-Making within DON

National Research Council Canada - National Science Library

Haupt, Jeffrey

1998-01-01

.... Industry capacity utilization and productivity measurement techniques and models were evaluated for their potential application to the Naval Air Warfare Center Aircraft Division (NAWCAD) RDT&E organization...

Effect of pH buffering capacity and sources of dietary sulfur on rumen fermentation, sulfide production, methane production, sulfate reducing bacteria, and total Archaea in in vitro rumen cultures.

Science.gov (United States)

Wu, Hao; Meng, Qingxiang; Yu, Zhongtang

2015-06-01

The effects of three types of dietary sulfur on in vitro fermentation characteristics, sulfide production, methane production, and microbial populations at two different buffer capacities were examined using in vitro rumen cultures. Addition of dry distilled grain with soluble (DDGS) generally decreased total gas production, degradation of dry matter and neutral detergent fiber, and concentration of total volatile fatty acids, while increasing ammonia concentration. High buffering capacity alleviated these adverse effects on fermentation. Increased sulfur content resulted in decreased methane emission, but total Archaea population was not changed significantly. The population of sulfate reducing bacteria was increased in a sulfur type-dependent manner. These results suggest that types of dietary sulfur and buffering capacity can affect rumen fermentation and sulfide production. Diet buffering capacity, and probably alkalinity, may be increased to alleviate some of the adverse effects associated with feeding DDGS at high levels. Copyright © 2015 Elsevier Ltd. All rights reserved.

Capacity building improve Malaysia's inspection and monitoring system for aquaculture and fishery products

NARCIS (Netherlands)

Gevers, G.J.M.; Zoontjes, P.W.; Essers, M.L.; Klijnstra, M.; Gerssen, A.

2012-01-01

The project aimed to help build a credible inspection and monitoring system that can guarantee safe quality products of Ministry of Health (MoH) and Department of Fisheries (DoF) by upgrading the analytical capacity of the laboratory staff directly involved in the analysis and detection of forbidden

Modelling of virtual production networks

Directory of Open Access Journals (Sweden)

2011-03-01

Full Text Available Nowadays many companies, especially small and medium-sized enterprises (SMEs, specialize in a limited field of production. It requires forming virtual production networks of cooperating enterprises to manufacture better, faster and cheaper. Apart from that, some production orders cannot be realized, because there is not a company of sufficient production potential. In this case the virtual production networks of cooperating companies can realize these production orders. These networks have larger production capacity and many different resources. Therefore it can realize many more production orders together than each of them separately. Such organization allows for executing high quality product. The maintenance costs of production capacity and used resources are not so high. In this paper a methodology of rapid prototyping of virtual production networks is proposed. It allows to execute production orders on time considered existing logistic constraints.

Influence of capacity- and time-constrained intermediate storage in two-stage food production systems

DEFF Research Database (Denmark)

Akkerman, Renzo; van Donk, Dirk Pieter; Gaalman, Gerard

2007-01-01

In food processing, two-stage production systems with a batch processor in the first stage and packaging lines in the second stage are common and mostly separated by capacity- and time-constrained intermediate storage. This combination of constraints is common in practice, but the literature hardly...... of systems like this. Contrary to the common sense in operations management, the LPT rule is able to maximize the total production volume per day. Furthermore, we show that adding one tank has considerable effects. Finally, we conclude that the optimal setup frequency for batches in the first stage...... pays any attention to this. In this paper, we show how various capacity and time constraints influence the performance of a specific two-stage system. We study the effects of several basic scheduling and sequencing rules in the presence of these constraints in order to learn the characteristics...

Enhancement of existing geothermal resource utilization by cascading to intensive aquaculture

Energy Technology Data Exchange (ETDEWEB)

Zachritz, W.H., II; Polka, R.; Schoenmackers

1996-04-01

A demonstration high rate aquaculture production system utilizing a cascaded geothermal resource was designed, constructed and operated to fulfill the objectives of this project. Analysis of the energy and water balances for the system indicated that the addition of an Aquaculture Facility expanded the use of the existing resource. This expanded use in no way affected the up- stream processes. Analysis of the system`s energy and water requirements indicated that the present resource was under-utilized and could be expanded. Energy requirements appeared more limiting than water use, but the existing system could be expanded to a culture volume of 72,000 gal. This system would have a potential production capacity of 93,600 lb/yr with a potential market value of $280,00/yr. Based on the results of this study, the heat remaining in the geothermal fluid from one square foot of operating greenhouse is sufficient to support six gallons of culture water for a high density aquaculture facility. Thus, the over 1.5M ft{sup 2} of existing greenhouse space in New Mexico, has the potential to create an aquaculture industry of nearly 9M gal. This translates to an annual production potential of 11.7M lb with a market value of $35.lM.

Stability measures for rolling schedules with applications to capacity expansion planning, master production scheduling, and lot sizing

OpenAIRE

Kimms, Alf

1996-01-01

This contribution discusses the measurement of (in-)stability of finite horizon production planning when done on a rolling horizon basis. As examples we review strategic capacity expansion planning, tactical master production schedulng, and operational capacitated lot sizing.

Important influencing factors analysis of airport sustainable development capacity: The case of China

Directory of Open Access Journals (Sweden)

Qiang Cui

2013-09-01

Full Text Available Purpose: This paper seeks to define and build the formation mechanism for airport sustainable development capacity.Design/methodology/approach: Structure Equation and System Dynamic Model are used to research the formation mechanism of airport sustainable development capacity.Findings: The most influencing factors are: airport own investment, Gross Domestic Product and power consumption of unit income.Originality/value: Firstly, a new concept to evaluate the dynamic work on sustainable development is proposed, which is defined as airport sustainable development capacity.  Secondly, the formation mechanism of airport sustainable development capacity is studied through Structure Equation Model and System Dynamics model. It fills in the gap of existing research whose main focus is static evaluation of airport sustainable development capacity and influencing factors identification rather than dynamic formation mechanism.

Scale down of the inactivated polio vaccine production process

NARCIS (Netherlands)

Thomassen, Y.E.; Oever, van 't R.; Vinke, C.M.; Spiekstra, A.; Wijffels, R.H.; Pol, van der L.A.; Bakker, W.A.M.

2013-01-01

The anticipated increase in the demand for inactivated polio vaccines resulting from the success in the polio eradication program requires an increase in production capacity and cost price reduction of the current inactivated polio vaccine production processes. Improvement of existing production

Improving the hydrogen production capacity of Rhodobacter capsulatus by genetically modifying redox balancing pathways

Energy Technology Data Exchange (ETDEWEB)

Oeztuerk, Yavuz [TUEBITAK Research Institute for Genetic Engineering and Biotechnology, Gebze Kocaeli (Turkey); Goekce, Abdulmecit [Istanbul Technical Univ. (Turkey). Dept. of Molecular Biology and Genetics; Guergan, Muazzez; Yuecel, Meral [Middle East Technical Univ., Ankara (Turkey). Dept. of Biology

2010-07-01

In Rhodobacter capsulatus, balancing the oxidation-reduction potential (redox-balance) is maintained via a number of inter-dependent regulatory mechanisms that enable these organisms to accommodate divergent growth modes. In order to maintain redox homeostasis, this bacterium possesses regulatory mechanisms functioning as electron sinks affecting the oxidation-reduction state of the ubiquinone pool. Under the photoheterotrophic growth conditions with reduced carbon sources, the excess reducing equivalents are primarily consumed via the reduction of CO{sub 2} through the Calvin-Benson-Bassham (CBB) pathway or by the reduction of protons into hydrogen with the use of dinitrogenase enzyme system. In this study, our aim was to develop strategies to funnel the excess reducing equivalents to nitrogenase-dependent hydrogen production by blocking the carbon-fixation pathway. To realize this purpose, CO{sub 2} fixation was blocked by inactivating the Phosphoribulokinase (PRK) of CBB pathway in wild type (MT1131), uptake-hydrogenase (YO3) and cyt cbb{sub 3} oxidase deficient (YO4) strains. The hydrogen production capacity of newly generated strains deficient in the Calvin-Benson-Bassham pathway were analyzed and compared with wild type strains. The results indicated that, the hydrogen production efficiency and capacity of R. capsulatus was further improved by directing the excess reducing equivalents to dinitrogenase-dependent hydrogen production. (orig.)

Factors affecting the water holding capacity of red meat products: a review of recent research advances.

Science.gov (United States)

Cheng, Qiaofen; Sun, Da-Wen

2008-02-01

The water holding capacity of meat products is a very important quality attribute which has an influence on product yield, which in turn has economic implications, but is also important in terms of eating quality. A number of pre-and post-mortem factors influence the water holding capacity (WHC) of meat. During the growth and development of meat animals, genotype and animal diet are important due to their direct influence on muscle characteristics. In the immediate pre-slaughter period, stresses on the animal such as fasting, and different stunning methods are likely to influence meat WHC. In the post-slaughter period chilling, ageing, injecting non-meat ingredients, as well as tumbling have important influences on WHC. Furthermore, cooking and cooling procedures for the final meat products can also affect the WHC of the product, in particular the cooking and the cooling methods, the heating and the cooling rate, the cooking temperature, and the endpoint temperature. This paper provides an overview of recent research on important intrinsic and extrinsic factors that affect the WHC of beef, pork, and lamb products, and reveals explanations and solutions to some of the critical problems related to WHC and product quality.

OPEC future capacity expansions

International Nuclear Information System (INIS)

Sandrea, I.

2005-01-01

This conference presentation examined OPEC future capacity expansions including highlights from 2000-2004 from the supply perspective and actions by OPEC; OPEC spare capacity in 2005/2006; medium-term capacity expansion and investments; long-term scenarios, challenges and opportunities; and upstream policies in member countries. Highlights from the supply perspective included worst than expected non-OPEC supply response; non-OPEC supply affected by a number of accidents and strikes; geopolitical tensions; and higher than expected demand for OPEC crude. OPEC's actions included closer relationship with other producers and consumers; capacity expansions in 2004 and 2005/2006; and OPEC kept the market well supplied with crude in 2004. The presentation also provided data using graphical charts on OPEC net capacity additions until 2005/2006; OPEC production versus spare capacity from 2003 to 2005; OPEC production and capacity to 2010; and change in required OPEC production from 2005-2020. Medium term expansion to 2010 includes over 60 projects. Medium-term risks such as project execution, financing, costs, demand, reserves, depletion, integration of Iraq, and geopolitical tensions were also discussed. The presentation concluded that in the long term, large uncertainties remain; the peak of world supply is not imminent; and continued and enhanced cooperation is essential to market stability. tabs., figs

Building research capacity and productivity among advanced practice nurses: an evaluation of the Community of Practice model.

Science.gov (United States)

Gullick, Janice G; West, Sandra H

2016-03-01

The aim of this study was to evaluate Wenger's Community of Practice as a framework for building research capacity and productivity. While research productivity is an expected domain in influential models of advanced nursing practice, internationally it remains largely unmet. Establishment of nursing research capacity precedes productivity and consequently, there is a strong imperative to identify successful capacity-building models for nursing-focussed research in busy clinical environments. Prospective, longitudinal, qualitative descriptive design was used in this study. Bruyn's participant observation framed evaluation of a Community of Practice comprising 25 advanced practice nurses. Data from focus groups, education evaluations, blog/email transcripts and field observations, collected between 2007 and 2014, were analysed using a qualitative descriptive method. The Community of Practice model invited differing levels of participation, allowed for evolution of the research community and created a rhythm of research-related interactions and enduring research relationships. Participants described the value of research for their patients and families and the significance of the developing research culture in providing richness to their practice and visibility of their work to multidisciplinary colleagues. Extensive examples of research dissemination and enrolment in doctoral programmes further confirmed this value. A Community of Practice framework is a powerful model enabling research capacity and productivity evidenced by publication. In developing a solid foundation for a nursing research culture, it should be recognized that research skills, confidence and growth develop over an extended period of time and success depends on skilled coordination and leadership. © 2015 John Wiley & Sons Ltd.

Integrated capacity and inventory management with capacity acquisition lead times

NARCIS (Netherlands)

Mincsovics, G.Z.; Tan, T.; Alp, O.

2009-01-01

We model a make-to-stock production system that utilizes permanent and contingent capacity to meet non-stationary stochastic demand, where a constant lead time is associated with the acquisition of contingent capacity. We determine the structure of the optimal solution concerning both the

Absorptive Capacity and Innovation: An Overview of International Scientific Production of Last Twenty-Five Years

Directory of Open Access Journals (Sweden)

Dennys Eduardo Rossetto

2017-02-01

Full Text Available This work aims to achieve an overview of international scientific production on absorptive and innovation capacities in order to mapping the academic contributions already made between 1990 and 2015 (last 25 years. Bibliometric methods, and social network analysis were used to understand the behavior of 1,693 published articles and analysis of key works cited. Most notably, the growing publication with related topics, in approximate exponential growth, concentration of work into five groups and six cocitação periodic coupling groups, indicating possible fields for publication related to the themes absorptive capacity and innovation. The analysis of the key articles cited identifies the themes and methods used, as well as understand the context of the themes absorptive capacity and innovation.

Immunomodulatory capacity of fungal proteins on the cytokine production of human peripheral blood mononuclear cells

NARCIS (Netherlands)

Jeurink, P.V.; Lull Noguera, C.; Savelkoul, H.F.J.; Wichers, H.J.

2008-01-01

Immunomodulation by fungal compounds can be determined by the capacity of the compounds to influence the cytokine production by human peripheral blood mononuclear cells (hPBMC). These activities include mitogenicity, stimulation and activation of immune effector cells. Eight mushroom strains

Assessing existing drought monitoring and forecasting capacities, mitigation and adaptation practices in Africa

Science.gov (United States)

Nyabeze, W. R.; Dlamini, L.; Lahlou, O.; Imani, Y.; Alaoui, S. B.; Vermooten, J. S. A.

2012-04-01

Drought is one of the major natural hazards in many parts of the world, including Africa and some regions in Europe. Drought events have resulted in extensive damages to livelihoods, environment and economy. In 2011, a consortium consisting of 19 organisations from both Africa and Europe started a project (DEWFORA) aimed at developing a framework for the provision of early warning and response through drought impact mitigation for Africa. This framework covers the whole chain from monitoring and vulnerability assessment to forecasting, warning, response and knowledge dissemination. This paper presents the first results of the capacity assessment of drought monitoring and forecasting systems in Africa, the existing institutional frameworks and drought mitigation and adaptation practices. Its focus is particularly on the historical drought mitigation and adaptation actions identified in the North Africa - Maghreb Region (Morocco, Algeria and Tunisia) and in the Southern Africa - Limpopo Basin. This is based on an extensive review of historical drought experiences. From the 1920's to 2009, the study identified 37 drought seasons in the North African - Maghreb Region and 33 drought seasons in the Southern Africa - Limpopo Basin. Existing literature tends to capture the spatial extent of drought at national and administrative scale in great detail. This is driven by the need to map drought impacts (food shortage, communities affected) in order to inform drought relief efforts (short-term drought mitigation measures). However, the mapping of drought at catchment scale (hydrological unit), required for longer-term measures, is not well documented. At regional level, both in North Africa and Southern Africa, two organisations are involved in drought monitoring and forecasting, while at national level 22 organisations are involved in North Africa and 37 in Southern Africa. Regarding drought related mitigation actions, the inventory shows that the most common actions

RESEARCHES REGARDING THE EFFECT OF SOME BIOLOGICALLY ACTIVE PRODUCTS UPON THE GERMINATION CAPACITIES OF SMOOTH BROME SEEDS

Directory of Open Access Journals (Sweden)

I. PET

2007-05-01

Full Text Available The carrying out of uniform forage crops represents an important technological loop for all agricultural species. The uniformity of these crops is caused especially by seed germination capacity, respectively by plant emergence capacity, depending upon the climatic and technological conditions. With regards to the researches carried out in this direction, we present here the influence exerted by some biologically-active products, used through extra-root application during plant vegetation period, upon seeds submitted to germination. The observations performed on smooth brome seeds have led to the conclusion that the per cent of germinated seeds ranges from 82%, in the untreated control variant, to 87.67% in the variant treated with the product Stimupro.

Evaluation of empowerment program to increase production capacity of fishery processing business in Semarang City, Indonesia

Science.gov (United States)

Swastawati, F.; Roessali, W.; Wijayanti, I.; Anggo, A. D.

2018-01-01

This study aims to evaluate the empowerment program to increase the production capacity of fishery product processing. Empowerment program was the implementation and utilization of science and technology in the area (IPTEKDA) LIPI Indonesia for Higher Education. Activity carried out in 2016 on fish processing industry “Lumintu Group”. Implementation of activities includes the transfer of technology to increase production capacity, business capital assistance in the form of production equipment, production assistance, and business management. This study uses qualitative, descriptive analysis, data collection with observation, interviews, and questionnaires. The results showed that the total number of active members was 24 people, 50% of the members specially cultivated the smoked fish that is the type of Catfish (Arius thalassinus) and Stingray (Dasyatis sp), while 45.83% of members processed boneless milkfish, and 4,17% produce salted fish. Increased average production scale of 31.82% in smoked fish business, 12.4% in boneless milkfish and 38.89% in salted fish business. Willingness to return capital in the good category, meaning that all members were able to carry out the schedule of relative payback on time. Approximately 83.3% of the group members felt that the program that followed had greatly assisted in increasing the scale of business but hoped to improve skills in terms of processing and marketing.

Scaling up the production capacity of U-Mo powder by HMD process

International Nuclear Information System (INIS)

Pasqualini, E.E.; Lopez, M.; Helzel Garcia, L.J.; Echenique, P.; Adelfang, P.

2002-01-01

The recent discovery that uranium alloys in metastable gamma phase can be hydrided at low temperatures and pressures have allowed developing the method of commuting bulk materials by milling the hydride to desired size and then dehydriding the powder. This process is called HMD (hydriding-milling-dehydriding) and needs an initial step of hydrogen incorporation to allow the alloy to be hydrided. This four step process has been conveniently set up for the production of U-7Mo powder for its use in nuclear fuels. Low equipment investment and low man power are needed for this achievement. The process is being analyzed in its scaling up for one kilogram batches and a 50 kilogram per year production capacity of U-Mo powder. (author)

Co-gasification of black liquor and pyrolysis oil: Evaluation of blend ratios and methanol production capacities

International Nuclear Information System (INIS)

Andersson, Jim; Furusjö, Erik; Wetterlund, Elisabeth; Lundgren, Joakim; Landälv, Ingvar

2016-01-01

Highlights: • Biomethanol from co-gasified black liquor and pyrolysis oil at different capacities. • Enables higher biofuel production for given available amount of black liquor. • Opportunity for cost efficient black liquor gasification also in small pulp mills. • The methanol can be cost competitive to 2nd generation ethanol and fossil fuels. • Fewer pulp mills would need to be converted to meet given biofuel demand. - Abstract: The main aim of this study is to investigate integrated methanol production via co-gasification of black liquor (BL) and pyrolysis oil (PO), at Swedish pulp mills. The objectives are to evaluate techno-economically different blends ratios for different pulp mill capacities. Furthermore, the future methanol production potential in Sweden and overall system consequences of large-scale implementation of PO/BL co-gasification are also assessed. It is concluded that gasification of pure BL and PO/BL blends up to 50% results in significantly lower production costs than what can be achieved by gasification of unblended PO. Co-gasification with 20–50% oil addition would be the most advantageous solution based on IRR for integrated biofuel plants in small pulp mills (200 kADt/y), whilst pure black liquor gasification (BLG) will be the most advantageous alternative for larger pulp mills. For pulp mill sizes between 300 and 600 kADt/y, it is also concluded that a feasible methanol production can be achieved at a methanol market price below 100 €/MW h, for production capacities ranging between 0.9 and 1.6 TW h/y for pure BLG, and between 1.2 and 6.5 TW h/y for PO/BL co-gasification. This study also shows that by introducing PO/BL co-gasification, fewer pulp mills would need to be converted to biofuel plants than with pure BLG, to meet a certain biofuel demand for a region. Due to the technical as well as organizational complexity of the integration this may prove beneficial, and could also potentially lower the total investment

Implementation of Capacity Planning Agent of Demand Responsive Planning Framework : Master’s Thesis in Production Engineering of The Royal Institute of Technology

OpenAIRE

Juhong, Nirut

2013-01-01

This master’s thesis is conducted as a conclusion of Master degree of Science in Production Engineering and Management at The Royal Institute of Technology. The focus of this thesis work is to implement a Capacity planning agent. Nowadays, companies need to adapt themselves to be as responsive to customers’ demand as possible. However, the responsiveness is usually limited by the fixed capacity of the production. Evolvable Production System (EPS), motivated by the limitation mentioned above, ...

Optimization for routing vehicles of seafood product transportation

Science.gov (United States)

Soenandi, I. A.; Juan, Y.; Budi, M.

2017-12-01

Recently, increasing usage of marine products is creating new challenges for businesses of marine products in terms of transportation that used to carry the marine products like seafood to the main warehouse. This can be a problem if the carrier fleet is limited, and there are time constraints in terms of the freshness of the marine product. There are many ways to solve this problem, including the optimization of routing vehicles. In this study, this strategy is to implement in the marine product business in Indonesia with such an expected arrangement of the company to optimize routing problem in transportation with time and capacity windows. Until now, the company has not used the scientific method to manage the routing of their vehicle from warehouse to the location of marine products source. This study will solve a stochastic Vehicle Routing Problems (VRP) with time and capacity windows by using the comparison of six methods and looking the best results for the optimization, in this situation the company could choose the best method, in accordance with the existing condition. In this research, we compared the optimization with another method such as branch and bound, dynamic programming and Ant Colony Optimization (ACO). Finally, we get the best result after running ACO algorithm with existing travel time data. With ACO algorithm was able to reduce vehicle travel time by 3189.65 minutes, which is about 23% less than existing and based on consideration of the constraints of time within 2 days (including rest time for the driver) using 28 tons capacity of truck and the companies need two units of vehicles for transportation.

Concentrated fed-batch cell culture increases manufacturing capacity without additional volumetric capacity.

Science.gov (United States)

Yang, William C; Minkler, Daniel F; Kshirsagar, Rashmi; Ryll, Thomas; Huang, Yao-Ming

2016-01-10

Biomanufacturing factories of the future are transitioning from large, single-product facilities toward smaller, multi-product, flexible facilities. Flexible capacity allows companies to adapt to ever-changing pipeline and market demands. Concentrated fed-batch (CFB) cell culture enables flexible manufacturing capacity with limited volumetric capacity; it intensifies cell culture titers such that the output of a smaller facility can rival that of a larger facility. We tested this hypothesis at bench scale by developing a feeding strategy for CFB and applying it to two cell lines. CFB improved cell line A output by 105% and cell line B output by 70% compared to traditional fed-batch (TFB) processes. CFB did not greatly change cell line A product quality, but it improved cell line B charge heterogeneity, suggesting that CFB has both process and product quality benefits. We projected CFB output gains in the context of a 2000-L small-scale facility, but the output was lower than that of a 15,000-L large-scale TFB facility. CFB's high cell mass also complicated operations, eroded volumetric productivity, and showed our current processes require significant improvements in specific productivity in order to realize their full potential and savings in manufacturing. Thus, improving specific productivity can resolve CFB's cost, scale-up, and operability challenges. Copyright © 2015 Elsevier B.V. All rights reserved.

Effects of Manufacturing Firm’s Capacity Planning on Performance of the Firm

Directory of Open Access Journals (Sweden)

Kifordu Anthony

2017-12-01

Full Text Available This study investigated capacity planning and performance in the manufacturing sector in the Southeastern States of Nigeria based on selected Brewing industries. The population of the study was 740 staff of the brewing industry in South-Eastearn Nigeria. The sample size of 509 was obtained using a Taro Yamani’s statistical formula. The study used questionnaire and oral interview guide for data gathering. A test- retest stood completed using Spearman’s rank correlation, giving a coefficient of 0.9. Findings revealed that capacity planning significantly enriched economic performance of the industry studied. There existed a strong affirmative relationship among capacity necessities planning and resources requirements planning. The paper suggested use of capacity planning as a technique to improve all performance factors. Similarly, performance advantage subsist from the correlation of volume requirements plans and resources requirements planning. The paper summarily held the position that volume preparation improved the economic performance in the industry under review. This inferred that goals achievement is possible. Likewise, the finding of substantial constructive association between volume supplies planning and resources supplies planning inferred an affirmative communication between the variables. This meant that resources supplies planning which was a method of organizing the detailed production plans could lead to an improvement of capacity supplies planning. That is to say, they are taking future decisions on the substances required for production capability of the brewing facility.

Network capacity auctions: promise and problems

International Nuclear Information System (INIS)

Newbery, David M.

2003-01-01

Well-designed auctions work favorably for allocating idiosyncratic properties efficiently. Auctions are used to allocate entry capacity for United Kingdom gas and inter-connector capacity for electricity in several European Union countries and can work well for allocating existing capacity, though careful auction design is needed to mitigate potential market power. Using auction prices to guide investment decisions in networks is problematic if bidders fear that sub-optimal investment will be compensated by regulatory fiat, lowering future capacity values. (Author)

Increasing cocoa productivity and farmer capacity in surrounding area of PT Kaltim Prima Coal and PT Berau Coal

Directory of Open Access Journals (Sweden)

J.B.Baon

2014-01-01

Full Text Available Based on agro-climate factors, most of surrounding area of coal mining sites in Indonesia is suitable for cocoa cultivation. However, most of cocoa farmers in the environs of coal mining sites have little access both to new technology of cocoa cultivation and to market of their cocoa products. Therefore, productivity of cocoa farms and the income of cocoa farmers are low, which may disturb social responsibility of the coal mining companies present in their surroundings. These are the consequences of poor interaction between the government, private sector and research sector. The aim of this study is to transfer and to implement good agricultural practices of cocoa in surrounding area of mining sites of Kaltim Prima Coal (KPC and Berau Coal (BC, East Kalimantan, in order to increase farmer capacity and cocoa productivity. Indonesian Coffee and Cocoa Research Institute as the developing agent of cocoa technology has established collaboration with corporate social responsibility program of KPC (already 7 years and BC (already 2 years to improve productivity and farmer capacity of cocoa farms surroundings the two cocoa mining companies. This paper discusses the aspects of natural, economic and human resources; baseline study; technology transfers; marketing partnership; cocoa productivity; farmer income after technology implementing; study of cocoa growth on post-coal-mining. It is concluded that improvement of the cocoa productivity and farmer capacity surroundings the two mining sites associated with high adoption of technology by farmers, better access to availability of knowledge for good agricultural practices, extension officers, demonstration plots, cocoa price, and length of market chains, partnership, and competition with oil palm plantations.

Conformal Haag-Kastler nets, pointlike localized fields and the existence of operator product expansions

International Nuclear Information System (INIS)

Fredenhagen, K.; Joerss, M.

1994-10-01

Starting from a chiral conformal Haag-Kastler net on 2 dimensional Minkowski space we construct associated pointlike localized fields. This amounts to a proof of the existence of operator product expansions. We derive the result in two ways. One is based on the geometrical identification of the modular structure, the other depends on a ''conformal cluster theorem'' of the conformal two-point-functions in algebraic quantum field theory. The existence of the fields then implies important structural properties of the theory, as PCT-invariance, the Bisognano-Wichmann identification of modular operators, Haag duality and additivity. (orig.)

Improvement of Stand Jig Sealer and Its Increased Production Capacity

Science.gov (United States)

Soebandrija, K. E. N.; Astuti, S. W. D.

2014-03-01

This paper has the objective to prove that improvement of Stand Jig Sealer can lead to the cycle time target as part of Improvement efforts and its Productivity. Prior researches through prior journals both classics journal such as Quesnay (1766) and Solow (1957) and updated journal such as Reikard (2011) researches, are mentioned and elaborated. Precisely, the research is narrowed down and specified into automotive industry and eventually the software related of SPSS and Structural Equation Modeling ( SEM ). The analysis and its method are conducted through the calculation working time. The mentioned calculation are reinforced with the hypothesis test using SPSS Version 19 and involve parameters of production efficiency, productivity calculation, and the calculation of financial investments. The results obtained are augmented achievement of cycle time target ≤ 80 seconds posterior to improvement stand jig sealer. The result from calculation of SPSS-19 version comprise the following aspects: the one-sided hypothesis test is rejection of Ho:μ≥80 seconds, the correlation rs=0.84, regression y = 0.159+0.642x, validity R table = 0.4438, reliability value of Cronbach's alpha = 0.885>0.70, independence (Chi Square) Asymp. Sig=0.028financial analysis (NPV 2,340,596>0, PI 2.04>1, IRR 45.56%>i=12.68%, PP=1.86). The Mentioned calculation results support the hypothesis and ultimately align with the objective of this paper to prove that improvement of Stand Jig Sealer and its relation toward the cycle time target. Precisely, the improvement of production capacity of PT. Astra Daihatsu Motor.

Determining optimal interconnection capacity on the basis of hourly demand and supply functions of electricity

International Nuclear Information System (INIS)

Keppler, Jan Horst; Meunier, William; Coquentin, Alexandre

2017-01-01

Interconnections for cross-border electricity flows are at the heart of the project to create a common European electricity market. At the time, increase in production from variable renewables clustered during a limited numbers of hours reduces the availability of existing transport infrastructures. This calls for higher levels of optimal interconnection capacity than in the past. In complement to existing scenario-building exercises such as the TYNDP that respond to the challenge of determining optimal levels of infrastructure provision, the present paper proposes a new empirically-based methodology to perform Cost-Benefit analysis for the determination of optimal interconnection capacity, using as an example the French-German cross-border trade. Using a very fine dataset of hourly supply and demand curves (aggregated auction curves) for the year 2014 from the EPEX Spot market, it constructs linearized net export (NEC) and net import demand curves (NIDC) for both countries. This allows assessing hour by hour the welfare impacts for incremental increases in interconnection capacity. Summing these welfare increases over the 8 760 hours of the year, this provides the annual total for each step increase of interconnection capacity. Confronting welfare benefits with the annual cost of augmenting interconnection capacity indicated the socially optimal increase in interconnection capacity between France and Germany on the basis of empirical market micro-data. (authors)

Visual attention capacity

DEFF Research Database (Denmark)

Habekost, Thomas; Starrfelt, Randi

2009-01-01

Psychophysical studies have identified two distinct limitations of visual attention capacity: processing speed and apprehension span. Using a simple test, these cognitive factors can be analyzed by Bundesen's Theory of Visual Attention (TVA). The method has strong specificity and sensitivity......, and measurements are highly reliable. As the method is theoretically founded, it also has high validity. TVA-based assessment has recently been used to investigate a broad range of neuropsychological and neurological conditions. We present the method, including the experimental paradigm and practical guidelines...... to patient testing, and review existing TVA-based patient studies organized by lesion anatomy. Lesions in three anatomical regions affect visual capacity: The parietal lobes, frontal cortex and basal ganglia, and extrastriate cortex. Visual capacity thus depends on large, bilaterally distributed anatomical...

The Use of Absorptive Capacity in Improving the New Product Development (NPD

Science.gov (United States)

Gunawan, W.; Gerardus, P.; Tji, B. J.; Richard, K.

2017-01-01

The term Absorptive Capacity (AC) refers to maximizing the external knowledge transfer into the organization in order to improve its performance. Since its introduction in year 1990, AC has been applied widely in many fields such as: economy, business, KM, HR, intellectual capital, IT, operation management, marketing, etc. Due to its wide application, nevertheless, The AC application in both Indonesian industry and higher education institutions (HEIs) are still rare to find. The Indonesian Directorate General of Higher Education (DGHE) has encouraged creating effective collaboration model that enables to link the HEIs with the industries in order to improve knowledge creation in improving product development that can be used by the firms. For this reason, the article examines the effective AC model that enables to assist in improving new product development (NPD) process in the polytechnic perspectives.

Biofilm-forming capacity in biogenic amine-producing bacteria isolated from dairy products.

Directory of Open Access Journals (Sweden)

Maria eDiaz

2016-05-01

Full Text Available Biofilms on the surface of food industry equipment are reservoirs of potentially food-contaminating bacteria - both spoilage and pathogenic. However, the capacity of biogenic amine (BA-producers to form biofilms has remained largely unexamined. BAs are low molecular weight, biologically active compounds that in food can reach concentrations high enough to be a toxicological hazard. Fermented foods, especially some types of cheese, accumulate the highest BA concentrations of all. The present work examines the biofilm-forming capacity of 56 BA-producing strains belonging to three genera and 10 species (12 Enterococcus faecalis, 6 Enterococcus faecium, 6 Enterococcus durans, 1 Enterococcus hirae, 12 Lactococcus lactis, 7 Lactobacillus vaginalis, 2 Lactobacillus curvatus, 2 Lactobacillus brevis, 1 Lactobacillus reuteri and 7 Lactobacillus parabuchneri, all isolated from dairy products. Strains of all the tested species - except for L. vaginalis - were able to produce biofilms on polystyrene and adhered to stainless steel. However, the biomass produced in biofilms was strain-dependent. These results suggest that biofilms may provide a route via which fermented foods can become contaminated by BA-producing microorganisms.

Recycling rice husks for high-capacity lithium battery anodes.

Science.gov (United States)

Jung, Dae Soo; Ryou, Myung-Hyun; Sung, Yong Joo; Park, Seung Bin; Choi, Jang Wook

2013-07-23

The rice husk is the outer covering of a rice kernel and protects the inner ingredients from external attack by insects and bacteria. To perform this function while ventilating air and moisture, rice plants have developed unique nanoporous silica layers in their husks through years of natural evolution. Despite the massive amount of annual production near 10(8) tons worldwide, so far rice husks have been recycled only for low-value agricultural items. In an effort to recycle rice husks for high-value applications, we convert the silica to silicon and use it for high-capacity lithium battery anodes. Taking advantage of the interconnected nanoporous structure naturally existing in rice husks, the converted silicon exhibits excellent electrochemical performance as a lithium battery anode, suggesting that rice husks can be a massive resource for use in high-capacity lithium battery negative electrodes.

The potential for second generation bio-ethanol production from ...

African Journals Online (AJOL)

A review of possible bio-sources that can be used for bioethanol production with emphasis on those that have potential of replacing conventional fuels with little or minor modification of existing biomass production capacity and trend is presented. Data analysis indicates that the straw from maize, sorghum and wheat can ...

Consolidating a Distributed Compound Management Capability into a Single Installation: The Application of Overall Equipment Effectiveness to Determine Capacity Utilization.

Science.gov (United States)

Green, Clive; Taylor, Daniel

2016-12-01

Compound management (CM) is a critical discipline enabling hit discovery through the production of assay-ready compound plates for screening. CM in pharma requires significant investments in manpower, capital equipment, repairs and maintenance, and information technology. These investments are at risk from external factors, for example, new technology rendering existing equipment obsolete and strategic site closures. At AstraZeneca, we faced the challenge of evaluating the number of CM sites required to support hit discovery in response to site closures and pressure on our operating budget. We reasoned that overall equipment effectiveness, a tool used extensively in the manufacturing sector, could determine the equipment capacity and appropriate number of sites. We identified automation downtime as the critical component governing capacity, and a connection between automation downtime and the availability of skilled staff. We demonstrated that sufficient production capacity existed in two sites to meet hit discovery demand without the requirement for an additional investment of $7 million in new facilities. In addition, we developed an automated capacity model that incorporated an extended working-day pattern as a solution for reducing automation downtime. The application of this solution enabled the transition to a single site, with an annual cost saving of $2.1 million. © 2015 Society for Laboratory Automation and Screening.

Bargaining and idle public sector capacity in health care

OpenAIRE

Barros, Pedro Pita

2005-01-01

A feature present in countries with a National Health Service is the co−existence of a públic and a private sector. Often, the public payer contracts with private providers while holding idle capacity. This is often seen as inefficiency from the management of public facilities. We present here a different rationale for the existence of such idle capacity: the public sector may opt to have idle capacity as a way to gain bargaining power vis−à−vis the private provider, under the assumption of a...

Bargaining and idle public sector capacity in health care

OpenAIRE

Xavier Martinez-Giralt; Barros Pedro Pita

2005-01-01

A feature present in countries with a National Health Service is the co-existence of a public and a private sector. Often, the public payer contracts with private providers while holding idle capacity. This is often seen as inefficiency from the management of public facilities. We present here a different rationale for the existence of such idle capacity: the public sector may opt to have idle capacity as a way to gain bargaining power vis-Ã -vis the private provider, under the assumption of ...

Strengthening Equity through Applied Research Capacity Building ...

International Development Research Centre (IDRC) Digital Library (Canada)

There exists limited understanding of how e-Health solutions are perceived, designed, implemented and used. ... The Strengthening Equity through Applied Research Capacity Building in e-Health (SEARCH) program will cultivate local research capacity to examine e-health and ... Liverpool School of Tropical Medicine.

Economic performance of irrigation capacity development to adapt to climate in the American Southwest

Science.gov (United States)

Ward, Frank A.; Crawford, Terry L.

2016-09-01

Growing demands for food security to feed increasing populations worldwide have intensified the search for improved performance of irrigation, the world's largest water user. These challenges are raised in the face of climate variability and from growing environmental demands. Adaptation measures in irrigated agriculture include fallowing land, shifting cropping patterns, increased groundwater pumping, reservoir storage capacity expansion, and increased production of risk-averse crops. Water users in the Gila Basin headwaters of the U.S. Lower Colorado Basin have faced a long history of high water supply fluctuations producing low-valued defensive cropping patterns. To date, little research grade analysis has investigated economically viable measures for irrigation development to adjust to variable climate. This gap has made it hard to inform water resource policy decisions on workable measures to adapt to climate in the world's dry rural areas. This paper's contribution is to illustrate, formulate, develop, and apply a new methodology to examine the economic performance from irrigation capacity improvements in the Gila Basin of the American Southwest. An integrated empirical optimization model using mathematical programming is developed to forecast cropping patterns and farm income under two scenarios (1) status quo without added storage capacity and (2) with added storage capacity in which existing barriers to development of higher valued crops are dissolved. We find that storage capacity development can lead to a higher valued portfolio of irrigation production systems as well as more sustained and higher valued farm livelihoods. Results show that compared to scenario (1), scenario (2) increases regional farm income by 30%, in which some sub regions secure income gains exceeding 900% compared to base levels. Additional storage is most economically productive when institutional and technical constraints facing irrigated agriculture are dissolved. Along with

Do retailers really profit from ambidextrous managers? : the impact of frontline mechanisms on new and existing product selling performance

NARCIS (Netherlands)

Borgh, van der W.; Schepers, J.J.L.

2014-01-01

When manufacturers introduce a new product to the market, downstream retail partners are faced with inherent trade-offs. Retail sales personnel have to support the new product's introduction with substantial sales efforts but also sell the existing products in stock, before storage and devaluation

COMPETITIVE ADVANTAGES OF POLISH ORGANIC SECTOR IN LIGHT OF CO-EXISTANCE BETWEEN GMO AND NON-GM PRODUCTS

OpenAIRE

Maciejczak, Mariusz

2008-01-01

The perfect segregation of the different agricultural production types, namely conventional, organic or based on genetically modified organisms is not possible in practice. But the side by side functioning of this systems in agricultural production and further on of the products on the shelves requires suitable measures during cultivation, harvest, transport, storage, and processing to ensure co-existence. Consumers, food and feed industry, as well as wholesalers and retailers in European Uni...

Assessment of wetland productive capacity from a remote-sensing-based model - A NASA/NMFS joint research project

Science.gov (United States)

Butera, M. K.; Frick, A. L.; Browder, J.

1983-01-01

NASA and the U.S. National Marine Fisheries Service have undertaken the development of Landsat Thematic Mapper (TM) technology for the evaluation of the usefulness of wetlands to estuarine fish and shellfish production. Toward this end, a remote sensing-based Productive Capacity model has been developed which characterizes the biological and hydrographic features of a Gulf Coast Marsh to predict detrital export. Regression analyses of TM simulator data for wetland plant production estimation are noted to more accurately estimate the percent of total vegetative cover than biomass, indicating that a nonlinear relationship may be involved.

Plasma temperature during methylene blue/light treatment influences virus inactivation capacity and product quality.

Science.gov (United States)

Gravemann, U; Handke, W; Sumian, C; Alvarez, I; Reichenberg, S; Müller, T H; Seltsam, A

2018-02-27

Photodynamic treatment using methylene blue (MB) and visible light is in routine use for pathogen inactivation of human plasma in different countries. Ambient and product temperature conditions for human plasma during production may vary between production sites. The influence of different temperature conditions on virus inactivation capacity and plasma quality of the THERAFLEX MB-Plasma procedure was investigated in this study. Plasma units equilibrated to 5 ± 2°C, room temperature (22 ± 2°C) or 30 ± 2°C were treated with MB/light and comparatively assessed for the inactivation capacity for three different viruses, concentrations of MB and its photoproducts, activity of various plasma coagulation factors and clotting time. Reduced solubility of the MB pill was observed at 5 ± 2°C. Photocatalytic degradation of MB increased with increasing temperature, and the greatest formation of photoproducts (mainly azure B) occurred at 30 ± 2°C. Inactivation of suid herpesvirus, bovine viral diarrhoea virus and vesicular stomatitis virus was significantly lower at 5 ± 2°C than at higher temperatures. MB/light treatment affected clotting times and the activity of almost all investigated plasma proteins. Factor VIII (-17·7 ± 8·3%, 22 ± 2°C) and fibrinogen (-14·4 ± 16·4%, 22 ± 2°C) showed the highest decreases in activity. Increasing plasma temperatures resulted in greater changes in clotting time and higher losses of plasma coagulation factor activity. Temperature conditions for THERAFLEX MB-Plasma treatment must be carefully controlled to assure uniform quality of pathogen-reduced plasma in routine production. Inactivation of cooled plasma is not recommended. © 2018 International Society of Blood Transfusion.

Radio-capacity of ecosystems

International Nuclear Information System (INIS)

Kultakhmedov, Yu.; Kultakhmedova-Vyshnyakova, V.

1997-01-01

This paper consider a universal approach to ecosystems of different types, based on representation of their radio-capacity. The concept of ecosystem includes reproduction of components (bio-productivity) and conditions such as maintaining of environment quality. Radio-capacity in the case of radionuclide pollution appears in accumulation and redistribution of radionuclides in the ecosystem. As a result the radionuclides are redistributed and buried in soil or lake bottom sediments. Estimation models for the radio-capacity of water and terrestrial ecosystems are represented. The calculations of the radio-capacity factor of water ecosystems are performed, and the high radio-capacity of a freshwater reservoir (F=0.6-0.8) and extremely high radio-capacity of a reservoir cascade (F c =0.99) is shown material from the Dnieper's cascade reservoirs. The methods of radio-capacity estimation of agroecosystems, wood and marine ecosystems are developed. (authors)

Capacity competition in electricity markets

International Nuclear Information System (INIS)

Crampes, Claude; Creti, Anna

2005-01-01

The article analyzed a two-stage game where capacity constrained electricity generators first choose how much capacity they make available and then compete in a uniform-rice auction. It is studied how capacity withholding can be used strategically to enforce market power and how uniform auctions in the price game change the results of capacity constrained competition models. The uniform auction procedure gives strong incentives to capacity restriction. At equilibrium, however, power shortage never occurs. Though auctions in electricity markets have already been studied by several economists, yet an important feature of spot trading is the capacity availability decision. In fact, for technical reasons, such as equipment maintenance or failures, the installed capacity may not work at maximum operating level and the spot market rules oblige generators to announce which plants they are willing to use and simultaneously their offer prices. Beside technical reasons, the so-called 'capacity declarations' also offer a strategic instrument for firms: by restricting capacity, operators can benefit from scarcity rents. Assessing whether generators withhold capacity is an intriguing issue for real electricity markets, though proving it is a difficult task. Several theoretical papers show that generators are able to keep wholesale prices high as compared to their generation costs. In our model, a generator is not obliged to declare all installed capacity as available, but decides on the amount of MW of electricity that is available. Hence the available capacity is an endogenous variable while the installed one is exogenous. The distinction between installed capacities and 'available' capacities allows to explain clearly whether generators exert market power by declaring unavailable some production units. Although we find multiple sub game perfect equilibria that cannot be eliminated by Pareto-dominance, all the outcomes are characterized by market price at the highest

Carrying Capacity

DEFF Research Database (Denmark)

Schroll, Henning; Andersen, Jan; Kjærgård, Bente

2012-01-01

A spatial planning act was introduced inIndonesia 1992 and renewed in 2008. It emphasised the planning role of decentralised authorities. The spatial planning act covers both spatial and environmental issues. It defines the concept of carrying capacity and includes definitions of supportive....../cities. Four different sectors (water, food production, waste, and forests) were selected as core areas for decentralised spatial planning. Indicators for SCC and ACC were identified and assessed with regard to relevance and quantifiability. For each of the indicators selected, a legal threshold or guiding...... was introduced inIndonesia 1992 and renewed in 2008. It emphasised the planning role of decentralised authorities. The spatial planning act covers both spatial and environmental issues. It defines the concept of carrying capacity and includes definitions of supportive carrying capacity (SCC) and assimilative...

A capacity assessment towards more resilient societies

Science.gov (United States)

Kuhlicke, C.; Steinführer, A.

2012-04-01

Social capacity building for natural hazards is a topic increasingly gaining relevance not only for so-called developing countries but also for European welfare states which are continuously challenged by the social, economic and ecological impacts of natural hazards. Following an outline of recent governance changes with regard to natural hazards, we develop a heuristic model of social capacity building by taking into account a wide range of existing expertise from different fields of research. Particular attention is paid to social vulnerability and its assessment, as well as to risk communication and risk education as specific strategies of social capacity building. We propose to distinguish between interventionist and participatory approaches, thus enabling for a better understanding of existing practices of social capacity building as well as their particular strengths and weaknesses. It is from this typology the presentation will develop two kinds of operational social capacity audits; one for communities and one for organisations. These assessments aim to identify appropriate measures and strategies regarding how to enhance, develop and build different kinds of capacities. By using these assessments participants will be able to identify strong capacities and can refer to the recommendations for tips on how to improve capacities identified as weak. That way deficits and outcomes are defined by those who are most likely to be affected by a future hazard event and most likely to be implementing improvements towards resilience.

A Realistic View of Long-Term Middle East Production Capacity

Energy Technology Data Exchange (ETDEWEB)

Samsam Bakhtiari, Ali [National Iranian Oil Company (NIOC), Tehran (Iran)

2003-07-01

The Middle East is a unique landmass bridging the continents of Europe, Africa and Asia. It now consists of fifteen major countries and one neutral zone. Four of these countries (Afghanistan, Israel, Jordan and Lebanon) are practically devoid of commercial oil resources. And the other eleven jointly control oil reserves estimated by Colin Campbell at 805 bnb (42% of world total) -- made up of 758 bnb discovered and 47 bnb yet-to-find. These eleven countries, which produced on average 20.8 mb/d and 19.3 mb/d in 2001 and 2002 respectively, can be subdivided into three categories: (i) the low producers (4 countries); (ii) the mid-size producers (4 countries); and (iii) the three large producers (Iran, Iraq and Saudi Arabia). In order to investigate the Middle East's long-term production capacity, the forecasts and scenarios developed by the following experts or institutions were reviewed: (a) Dr. Campbell; (b) the major international institutions (IEA, EIA, OPEC); (c) the major oil companies; (d) the major international banks; (e) the specialised press; (f) prominent economists and consultants; (g) the simulations of the 'World Oil Production Capacity' (WOCAP) model. The most significant results were derived from Dr. Campbell's predictions and the WOCAP model. Both of these show Middle Eastern producers going through a long 'bumpy plateau' between 2003 and 2020 with a gradual ramping down during the second decade. WOCAP's simulations for each of the large three producers are presented and analysed. All in all, the Middle Eastern countries, which produce nearly a third of global crude oil, will continue to play a major role on the global oil stage, a role that, with time, can only tend to become more predominant. And although the region's oil represents over 40% of global reserves and roughly two-thirds of proved reserves, there are limits to its output. For those believing that for Middle East oil 'the sky's the limit

Prospects for OPEC capacity

International Nuclear Information System (INIS)

Adelman, M.A.

1995-01-01

OPEC capacity is not exogenous, but responds to demand. Price increases have not been caused by capacity shortages. OPEC nations find it hard to set aside even very small portions of their revenues for oil investment, despite its extreme profitability. Foreign investors face high risks. Production sharing makes their after-tax return even more unstable. (author)

A simulation study of capacity utilization to predict future capacity for manufacturing system sustainability

Science.gov (United States)

Rimo, Tan Hauw Sen; Chai Tin, Ong

2017-12-01

Capacity utilization (CU) measurement is an important task in a manufacturing system, especially in make-to-order (MTO) type manufacturing system with product customization, in predicting capacity to meet future demand. A stochastic discrete-event simulation is developed using ARENA software to determine CU and capacity gap (CG) in short run production function. This study focused on machinery breakdown and product defective rate as random variables in the simulation. The study found that the manufacturing system run in 68.01% CU and 31.99% CG. It is revealed that machinery breakdown and product defective rate have a direct relationship with CU. By improving product defective rate into zero defect, manufacturing system can improve CU up to 73.56% and CG decrease to 26.44%. While improving machinery breakdown into zero breakdowns will improve CU up to 93.99% and the CG decrease to 6.01%. This study helps operation level to study CU using “what-if” analysis in order to meet future demand in more practical and easier method by using simulation approach. Further study is recommended by including other random variables that affect CU to make the simulation closer with the real-life situation for a better decision.

Seismic capacity of switchgear

International Nuclear Information System (INIS)

Bandyopadhyay, K.; Hofmayer, C.; Kassir, M.; Pepper, S.

1989-01-01

As part of a component fragility program sponsored by the USNRC, BNL has collected existing information on the seismic capacity of switchgear assemblies from major manufacturers. Existing seismic test data for both low and medium voltage switchgear assemblies have been evaluated and the generic results are presented in this paper. The failure modes are identified and the corresponding generic lower bound capacity levels are established. The test response spectra have been used as a measure of the test vibration input. The results indicate that relays chatter at a very low input level at the base of the switchgear cabinet. This change of state of devices including relays have been observed. Breaker tripping occurs at a higher vibration level. Although the structural failure of internal elements have been noticed, the overall switchgear cabinet structure withstands a high vibration level. 5 refs., 2 figs., 2 tabs

Value for railway capacity

DEFF Research Database (Denmark)

Sameni, Melody Khadem; Preston, John M.

2012-01-01

to analyze the efficiency of operators in transforming inputs of allocated capacity of infrastructure and franchise payments into valuable passenger service outputs while avoiding delays. By addressing operational and economic aspects of capacity utilization simultaneously, the paper deviates from existing...... DEA work on the economic efficiency of railways by considering a new combination of input-output that also incorporates quality of service. The constant and variable returns to scale models are applied to the case study of franchised passenger operators in Great Britain. The follow-up Tobit regression...

Public health capacity in the provision of health care services.

Science.gov (United States)

Valdmanis, Vivian; DeNicola, Arianna; Bernet, Patrick

2015-12-01

In this paper, we assess the capacity of Florida's public health departments. We achieve this by using bootstrapped data envelopment analysis (DEA) applied to Johansen's definition of capacity utilization. Our purpose in this paper is to measure if there is, theoretically, enough excess capacity available to handle a possible surge in the demand for primary care services especially after the implementation of the Affordable Care Act that includes provisions for expanded public health services. We measure subunit service availability using a comprehensive data source available for all 67 county health departments in the provision of diagnostic care and primary health care. In this research we aim to address two related research questions. First, we structure our analysis so as to fix budgets. This is based on the assumption that State spending on social and health services could be limited, but patient needs are not. Our second research question is that, given the dearth of primary care providers in Florida if budgets are allowed to vary is there enough medical labor to provide care to clients. Using a non-parametric approach, we also apply bootstrapping to the concept of plant capacity which adds to the productivity research. To preview our findings, we report that there exists excess plant capacity for patient treatment and care, but question whether resources may be better suited for more traditional types of public health services.

What factors influence mitigative capacity?

International Nuclear Information System (INIS)

Winkler, Harald; Baumert, Kevin; Blanchard, Odile; Burch, Sarah; Robinson, John

2007-01-01

This article builds on Yohe's seminal piece on mitigative capacity, which elaborates 'determinants' of mitigative capacity, also reflected in the IPCC's third assessment report. We propose a revised definition, where mitigative capacity is a country's ability to reduce anthropogenic greenhouse gas emissions or enhance natural sinks. By 'ability' we mean skills, competencies, fitness, and proficiencies that a country has attained which can contribute to GHG emissions mitigation. A conceptual framework is proposed, linking mitigative capacity to a country's sustainable development path, and grouping the factors influencing mitigative capacity into three main sets: economic factors, institutional ones, and technology. Both quantitative and qualitative analysis of factors is presented, showing how these factors vary across countries. We suggest that it is the interplay between the three economic factors-income, abatement cost and opportunity cost-that shape mitigative capacity. We find that income is an important economic factor influencing mitigative capacity, while abatement cost is important in turning mitigative capacity into actual mitigation. Technology is a critical mitigative capacity, including the ability to absorb existing climate-friendly technologies or to develop innovative ones. Institutional factors that promote mitigative capacity include the effectiveness of government regulation, clear market rules, a skilled work force and public awareness. We briefly investigate such as high abatement cost or lack of political willingness that prevent mitigative capacity from being translated into mitigation

Capacitated Dynamic Lot Sizing with Capacity Acquisition

DEFF Research Database (Denmark)

Li, Hongyan; Meissner, Joern

One of the fundamental problems in operations management is to determine the optimal investment in capacity. Capacity investment consumes resources and the decision is often irreversible. Moreover, the available capacity level affects the action space for production and inventory planning decisions...

Capacitated dynamic lot sizing with capacity acquisition

DEFF Research Database (Denmark)

Li, Hongyan; Meissner, Joern

2011-01-01

One of the fundamental problems in operations management is determining the optimal investment in capacity. Capacity investment consumes resources and the decision, once made, is often irreversible. Moreover, the available capacity level affects the action space for production and inventory...

Representation of Solar Capacity Value in the ReEDS Capacity Expansion Model

Energy Technology Data Exchange (ETDEWEB)

Sigrin, B. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Sullivan, P. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ibanez, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, R. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2014-03-01

An important issue for electricity system operators is the estimation of renewables' capacity contributions to reliably meeting system demand, or their capacity value. While the capacity value of thermal generation can be estimated easily, assessment of wind and solar requires a more nuanced approach due to the resource variability. Reliability-based methods, particularly assessment of the Effective Load-Carrying Capacity, are considered to be the most robust and widely-accepted techniques for addressing this resource variability. This report compares estimates of solar PV capacity value by the Regional Energy Deployment System (ReEDS) capacity expansion model against two sources. The first comparison is against values published by utilities or other entities for known electrical systems at existing solar penetration levels. The second comparison is against a time-series ELCC simulation tool for high renewable penetration scenarios in the Western Interconnection. Results from the ReEDS model are found to compare well with both comparisons, despite being resolved at a super-hourly temporal resolution. Two results are relevant for other capacity-based models that use a super-hourly resolution to model solar capacity value. First, solar capacity value should not be parameterized as a static value, but must decay with increasing penetration. This is because -- for an afternoon-peaking system -- as solar penetration increases, the system's peak net load shifts to later in the day -- when solar output is lower. Second, long-term planning models should determine system adequacy requirements in each time period in order to approximate LOLP calculations. Within the ReEDS model we resolve these issues by using a capacity value estimate that varies by time-slice. Within each time period the net load and shadow price on ReEDS's planning reserve constraint signals the relative importance of additional firm capacity.

Exploring crude oil production and export capacity of the OPEC Middle East countries

International Nuclear Information System (INIS)

Matsumoto, Ken'ichi; Voudouris, Vlasios; Stasinopoulos, Dimitrios; Rigby, Robert; Di Maio, Carlo

2012-01-01

As the world economy highly depends on crude oil, it is important to understand the dynamics of crude oil production and export capacity of major oil-exporting countries. Since crude oil resources are predominately located in the OPEC Middle East, these countries are expected to have significant leverage in the world crude oil markets by taking into account a range of uncertainties. In this study, we develop a scenario for crude oil export and production using the ACEGES model considering uncertainties in the resource limits, demand growth, production growth, and peak/decline point. The results indicate that the country-specific peak of both crude oil export and production comes in the early this century in the OPEC Middle East countries. On the other hand, they occupy most of the world export and production before and after the peak points. Consequently, these countries are expected to be the key group in the world crude oil markets. We also find that the gap between the world crude oil demand and production broadens over time, meaning that the acceleration of the development of ultra-deep-water oil, oil sands, and extra-heavy oil will be required if the world continuous to heavily rely on oil products. - Highlights: ► We simulate the future scenario of crude oil export and production using ACEGES. ► The simulated results are analyzed using the GAMLSS framework. ► The peak points of oil export and production will come early in this century. ► The OPCE Middle East will produce most of the world crude oil in the near future. ► These countries will continuously be the key players in the crude oil markets.

A Production Planning Model for Make-to-Order Foundry Flow Shop with Capacity Constraint

Directory of Open Access Journals (Sweden)

Xixing Li

2017-01-01

Full Text Available The mode of production in the modern manufacturing enterprise mainly prefers to MTO (Make-to-Order; how to reasonably arrange the production plan has become a very common and urgent problem for enterprises’ managers to improve inner production reformation in the competitive market environment. In this paper, a mathematical model of production planning is proposed to maximize the profit with capacity constraint. Four kinds of cost factors (material cost, process cost, delay cost, and facility occupy cost are considered in the proposed model. Different factors not only result in different profit but also result in different satisfaction degrees of customers. Particularly, the delay cost and facility occupy cost cannot reach the minimum at the same time; the two objectives are interactional. This paper presents a mathematical model based on the actual production process of a foundry flow shop. An improved genetic algorithm (IGA is proposed to solve the biobjective problem of the model. Also, the gene encoding and decoding, the definition of fitness function, and genetic operators have been illustrated. In addition, the proposed algorithm is used to solve the production planning problem of a foundry flow shop in a casting enterprise. And comparisons with other recently published algorithms show the efficiency and effectiveness of the proposed algorithm.

Integral capacity and inventory decision making in a simple production system

NARCIS (Netherlands)

Dellaert, N.P.; Flapper, S.D.P.; Tan, T.

2007-01-01

Abstract. This paper deals with the integral acquisition of capacity and material in a situation with uncertain demand, with non zero lead-times for the supply of both materials and capacity. Although there is a lot of literature on the time-phased acquisition of capacity and materials, most of this

Competition under capacitated dynamic lot-sizing with capacity acquisition

DEFF Research Database (Denmark)

Li, Hongyan; Meissner, Joern

2011-01-01

Lot-sizing and capacity planning are important supply chain decisions, and competition and cooperation affect the performance of these decisions. In this paper, we look into the dynamic lot-sizing and resource competition problem of an industry consisting of multiple firms. A capacity competition...... production setup, along with inventory carrying costs. The individual production lots of each firm are limited by a constant capacity restriction, which is purchased up front for the planning horizon. The capacity can be purchased from a spot market, and the capacity acquisition cost fluctuates...

Capacity for work researching method in animal experiment

International Nuclear Information System (INIS)

Pul'nov, V.N.; Mashneva, N.I.

1978-01-01

The existing methods of examining the work capacity of animals are discussed with reference to extrapolation of animal data to man. A modified procedure for measuring maximal physical strength is proposed, whereby static endurance of animals at a given exercise rate can be measured. For an integrated evaluation of work capacity, a formula of absolute work capacity is suggested. The proposed procedure may be used to study the working capacity of animals exposed to unfavorable factors of radiation or nonradiation nature

EFL Speech Production: Exploring the relationship between working memory capacity and proficiency level

Directory of Open Access Journals (Sweden)

Gicele Vergine Vieira PREBIANCA

2013-12-01

Full Text Available The present study explores the relationship between working memory capacity (WMC and proficiency level in EFL1 speech production. Forty-one participants performed two WMC tests – the Speaking Span Test in L1 and in L2. The statistical analysis indicated both a variation on WMC scores in L2 as a function of proficiency as well as a difference between WMC scores in L1 and in L2. Findings are explained mainly in respect to the interplay between automatic and controlled processes on memory retrieval and on the development of L2 proficiency.

Promoting renewable energy through capacity markets: An analysis of the Russian support scheme

International Nuclear Information System (INIS)

Boute, Anatole

2012-01-01

Most existing support schemes aim to stimulate the deployment of renewable energy sources in the electricity sector on the basis of the electricity output (MW h) of renewable energy installations. Support is anchored in the electricity commodity market. In contrast to this established approach, Russia intends to promote renewable energy through the capacity market. The idea is to remunerate investors for the installed capacity (MW) of their installations, in particular for the availability of their installations to produce electricity. This article argues that, contrary to the implicit consensus, a capacity-based approach to supporting renewable energy can provide an alternative to the current output-based schemes. Capacity-based schemes limit the incentive that the operators of renewable energy installations currently have under output-based schemes to deliver electricity to the grid even in periods of low demand. These schemes also provide investors with a more predictable income flow. However, to be successful, the regulation of capacity supply – currently designed for flexible power plants – needs to accommodate the specific production patterns of variable renewable energy installations. This paper examines ways to overcome this challenge in Russia and provides more general conclusions on the complex interaction between capacity markets and renewable energy investments.

Reconnaissance investigation of the rough diamond resource potential and production capacity of Côte d’Ivoire

Science.gov (United States)

Chirico, Peter G.; Malpeli, Katherine C.

2013-01-01

�guéla and a total of 1,100,000 carats remain in Tortiya. Production capacity was calculated for the two study areas for the years 2006–2010 and 2012–2013. Production capacity was found to range from between 38,000 carats and 375,000 carats in Séguéla and from 13,000 carats and 20,000 carats in Tortiya. Further, this study demonstrates that artisanal mining activities can be successfully monitored by using remote sensing and geologic modeling techniques. The production capacity estimates presented here fill a significant data gap and provide policy makers, the UN, and the KP with important information not otherwise available.

Uranium enrichment. Technology, economics, capacity

International Nuclear Information System (INIS)

Voigt, W.R. Jr.; Saire, D.E.; Gestson, D.K.; Peske, S.E.; Vanstrum, P.R.

1983-01-01

Large-scale enrichment of uranium has now been carried out for 40 years. While the gaseous diffusion process was the original choice of several countries and continues today to provide the major component of the world production of separative work, the last two decades have witnessed the development of a number of alternative processes for enrichment. These processes, which are being studied and deployed around the world, offer a wide range of technical and economic characteristics which will be useful in assuring adequate capacity to meet projected reactor fuel market needs through the rest of this century at competitive prices. With present uncertainties in future enriched uranium needs, it is apparent that flexibility in the deployment and operation of any enrichment process will be one of the prime considerations for the future. More economical production of separative work not only can have a beneficial impact on reactor fuel costs, but also tends to conserve natural uranium resources. This paper reviews the world scene in the enrichment component of the fuel cycle, including existing or planned commercial-scale facilities and announced R+D efforts on various processes. (author)

Uranium enrichment: technology, economics, capacity

Energy Technology Data Exchange (ETDEWEB)

Voigt, Jr., W. R.; Vanstrum, P. R.; Saire, D. E.; Gestson, D. K.; Peske, S. E.

1982-08-01

Large-scale enrichment of uranium has now been carried out for 40 years. While the gaseous diffusion process was the original choice of several countries and continues today to provide the major component of the world production of separative work, the last two decades have witnessed the development of a number of alternative processes for enrichment. These processes, which are being studied and deployed around the world, offer a wide range of technical and economic characteristics which will be useful in assuring adequate capacity to meet projected reactor fuel market needs through the rest of this century at competitive prices. With present uncertainties in future enriched uranium needs, it is apparent that flexibility in the deployment and operation of any enrichment process will be one of the prime considerations for the future. More economical production of separative work not only can have a beneficial impact on reactor fuel costs, but also tends to conserve natural uranium resources. This paper reviews the world scene in the enrichment component of the fuel cycle, including existing or planned commercial-scale facilities and announced R and D efforts on various processes.

Uranium enrichment: technology, economics, capacity

International Nuclear Information System (INIS)

Voigt, W.R. Jr.; Vanstrum, P.R.; Saire, D.E.; Gestson, D.K.; Peske, S.E.

1982-01-01

Large-scale enrichment of uranium has now been carried out for 40 years. While the gaseous diffusion process was the original choice of several countries and continues today to provide the major component of the world production of separative work, the last two decades have witnessed the development of a number of alternative processes for enrichment. These processes, which are being studied and deployed around the world, offer a wide range of technical and economic characteristics which will be useful in assuring adequate capacity to meet projected reactor fuel market needs through the rest of this century at competitive prices. With present uncertainties in future enriched uranium needs, it is apparent that flexibility in the deployment and operation of any enrichment process will be one of the prime considerations for the future. More economical production of separative work not only can have a beneficial impact on reactor fuel costs, but also tends to conserve natural uranium resources. This paper reviews the world scene in the enrichment component of the fuel cycle, including existing or planned commercial-scale facilities and announced R and D efforts on various processes

Production planning in the Combinado Lácteo Santiago

Directory of Open Access Journals (Sweden)

Edith Carmen Fajardo-Alcolea

2017-12-01

Full Text Available A planning, programming and control of the production procedure is designed in this paper to consider all the technical and organizational aspects that are involved in planning, using the balance and normative method, and a variant of the General Algorithm for the Calculation of the Capacities. This procedure is supported by an innovative computer application designed to assist students, technicians and specialists in the planning stages. The procedure is applied in the company “Combinado Lácteo de Santiago de Cuba” to plan the production in 2016. As a result, an innovation of an organizational type is obtained that allows the Production Master Plan, disaggregated in the different time horizons, consider the real capacity of the plants. For its evaluation it was compared to the production plan prepared by the company and the actual production data of the first quarter of the year to determine the existing differences.

Exploring the meteorological potential for planning a high performance European electricity super-grid: optimal power capacity distribution among countries

Science.gov (United States)

Santos-Alamillos, Francisco J.; Brayshaw, David J.; Methven, John; Thomaidis, Nikolaos S.; Ruiz-Arias, José A.; Pozo-Vázquez, David

2017-11-01

The concept of a European super-grid for electricity presents clear advantages for a reliable and affordable renewable power production (photovoltaics and wind). Based on the mean-variance portfolio optimization analysis, we explore optimal scenarios for the allocation of new renewable capacity at national level in order to provide to energy decision-makers guidance about which regions should be mostly targeted to either maximize total production or reduce its day-to-day variability. The results show that the existing distribution of renewable generation capacity across Europe is far from optimal: i.e. a ‘better’ spatial distribution of resources could have been achieved with either a ~31% increase in mean power supply (for the same level of day-to-day variability) or a ~37.5% reduction in day-to-day variability (for the same level of mean productivity). Careful planning of additional increments in renewable capacity at the European level could, however, act to significantly ameliorate this deficiency. The choice of where to deploy resources depends, however, on the objective being pursued—if the goal is to maximize average output, then new capacity is best allocated in the countries with highest resources, whereas investment in additional capacity in a north/south dipole pattern across Europe would act to most reduce daily variations and thus decrease the day-to-day volatility of renewable power supply.

Understanding Absorptive Capacities is an "Innovation Systems" Context

DEFF Research Database (Denmark)

Narula, Rajneesh

2004-01-01

This paper seeks to broaden our understanding of the concept underlying absorptive capacity atthe macro -level, paying particular attention to the growth and development perspectives. Weprovide definitions of absorptive and technological capacity, external technology flows,productivity growth....... We also undertake to explain how the nature ofabsorptive capacity changes with stages of economic development, and the importance of thedifferent aspects of absorptive capability at different stages. The relationship is not a linear one:the benefits that accrue from marginal increases in absorptive...... capability change over time.Finally, we provide a tentative and preliminary conceptual argument of how the different stagesof absorptive capacity are related to productivity growth, economic growth and employmentcreation.Key words: New economy, absorptive capacity, knowledge...

Effects of spray drying on antioxidant capacity and anthocyanidin content of blueberry by-products.

Science.gov (United States)

Lim, Kar; Ma, Mitzi; Dolan, Kirk D

2011-09-01

The effect of spray drying on degradation of nutraceutical components in cull blueberry extract was investigated. Samples collected before and after spray drying were tested for antioxidant capacity using oxygen radical absorbance capacity (ORAC(FL) ) and total phenolics; and for individual anthocyanidins. In Study 1, four different levels of maltodextrin (blueberry solids to maltodextrin ratios of 5: 95, 10: 90, 30: 70, and 50: 50) were spray dried a pilot-scale spray dryer. There was significantly higher retention of nutraceutical components with increased levels of maltodextrin indicating a protective effect of maltodextrin on the nutraceutical components during spray drying. In Study 2, the air inlet temperature of the spray dryer was kept constant for all runs at 150 °C, with 2 different outlet temperatures of 80 and 90 °C. The degradation of nutraceutical components was not significantly different at the 2 selected outlet temperatures. ORAC(FL) reduction for blueberry samples after spray drying was 66.3% to 69.6%. After spray drying, total phenolics reduction for blueberry was 8.2% to 17.5%. Individual anthocyanidin reduction for blueberry was 50% to 70%. The experimental spray dried powders compared favorably to commercial blueberry powders. Results of the study show that use of blueberry by-products is feasible to make a value-added powder. Results can be used by producers to estimate final nutraceutical content of spray-dried blueberry by-products. © 2011 Institute of Food Technologists®

Developing the UIC 406 Method for Capacity Analysis

DEFF Research Database (Denmark)

Khadem Sameni, Melody; Landex, Alex; Preston, John

2011-01-01

This paper applies an improvement cycle for analysing and enhancing capacity utilisation of an existing timetable. Macro and micro capacity utilisation are defined based on the discrete nature of capacity utilisation and different capacity metrics are analysed. In the category of macro asset...... utilisation, two methods of CUI and the UIC 406 are compared with each other. A British and a Danish case study are explored for a periodic and a nonperiodic timetable: 1- Freeing up capacity by omitting the train that has the highest capacity consumption (British case study). 2- Adding trains to use...... the spare capacity (Danish case study). Some suggestions are made to develop meso indices by using the UIC 406 method to decide between the alternatives for adding or removing trains....

Capacity allocation and outsourcing in a process industry

NARCIS (Netherlands)

Kok, de A.G.

2000-01-01

In this paper we consider a production facility producing a uniform product that ships a number of different package sizes to a (number of) stockpoint(s). The packaging capacity owned by the facility is finite and the actually used capacity must be reserved sometime before actual use. Furthermore,

Pipeline capacity and heavy oil markets

International Nuclear Information System (INIS)

Scott, G.R.

1993-01-01

Aspects of transporting heavy crude to markets from Canadian sources are discussed, with reference to pipeline expansion, western Canadian crude supply, and exports to various Petroleum Administration for Defense Districts (PADDs) in the USA. Pipeline expansions have been proposed by Interprovincial Pipeline, Trans Mountain Pipeline, Rangeland, and Wascana, and some of these proposals are in the review stage. Western Canadian crude supply is expected to peak at 1.9 million bbl/d in 1996. An increase in heavy crude supply is expected but this increase will not be sufficient to offset a decline in light crude supply. Adequate pipeline capacity should exist with the Interprovincial expansion volume of 170,000 bbl/d and the Trans Mountain expansion of 38,000 bbl/d forecast to be in place by 1995. Canadian crude exports to the USA have steadily increased since 1989, and heavy crude exports have grown an average of 20,000 bbl/d each year. In PADD Region IV, oil production is declining and ca 20,000 bbl/d of heavy crude will be needed by the year 2000; additional pipeline capacity will be required. In PADD Region II, Canadian heavy crude imports are ca 390,000 bbl/d and further market opportunities exist, after the Interprovincial expansion is complete. When the various combinations of possible pipeline expansions or reversals are considered, a range of heavy crude near-term growth potentials is obtained in which Canadian heavy oil would displace offshore heavy oil supplied to USA refineries. This potential is seen to range from 35,000 bbl/d to 200,000 bbl/d. 7 refs., 20 figs., 3 tabs

Production targets in the GDR from 1976 to 1980

Energy Technology Data Exchange (ETDEWEB)

Krause, H

1977-08-01

Key production targets set for the brown coal and electricity sectors in the GDR for the period up to 1980 include the production of 258 million tons of solid fuels and 47 million tons of briquettes, to be achieved by optimum utilization of existing top production capacities to release open-cast mining equipment as well as by the reconstruction of obsolete briquetting plants and the more-intensive utilization of saliniferous coal. Electric power supplies are to be maintained by extending the network of power stations and high-to-low voltage outdoor grid capacities, including the construction of more power stations by 1980. In gas and coke production, more-intensive use is to be made of existing plants, the capacity of underground storage units is to be increased and more attention is to be paid to the chemical utilization of residual gases. In the sphere of scientific and technical development, coal and pressure gasification figures are to be kept at present levels and further development work is to be undertaken on coal and pressure gasification at the combined Schwarze Pumpe works, where coke production is to reach 1350 kg per annum by 1980. By this time an additional 415,000 newly built flats are to be given long-distance heating secured on a solid-fuel basis and with the increased utilization of the thermal power link, the application of the module principle to combined heating and power stations of specific constructional type and those of optimum unit size; and the extension of interlinking heating grid systems for cities.

Uncertainty in Seismic Capacity of Masonry Buildings

Directory of Open Access Journals (Sweden)

Nicola Augenti

2012-07-01

Full Text Available Seismic assessment of masonry structures is plagued by both inherent randomness and model uncertainty. The former is referred to as aleatory uncertainty, the latter as epistemic uncertainty because it depends on the knowledge level. Pioneering studies on reinforced concrete buildings have revealed a significant influence of modeling parameters on seismic vulnerability. However, confidence in mechanical properties of existing masonry buildings is much lower than in the case of reinforcing steel and concrete. This paper is aimed at assessing whether and how uncertainty propagates from material properties to seismic capacity of an entire masonry structure. A typical two-story unreinforced masonry building is analyzed. Based on previous statistical characterization of mechanical properties of existing masonry types, the following random variables have been considered in this study: unit weight, uniaxial compressive strength, shear strength at zero confining stress, Young’s modulus, shear modulus, and available ductility in shear. Probability density functions were implemented to generate a significant number of realizations and static pushover analysis of the case-study building was performed for each vector of realizations, load combination and lateral load pattern. Analysis results show a large dispersion in displacement capacity and lower dispersion in spectral acceleration capacity. This can directly affect decision-making because both design and retrofit solutions depend on seismic capacity predictions. Therefore, engineering judgment should always be used when assessing structural safety of existing masonry constructions against design earthquakes, based on a series of seismic analyses under uncertain parameters.

Production systems, diversity and richness of cavy culture in ...

African Journals Online (AJOL)

In order to assess existing cavy (Cavia porcellus) production systems of Cameroon western highlands and rain forest agro-ecological zones, a household ... for a well designed and comprehensive national breeding program for cavies, and increased capacity building of farmers to address mortality rates and health issues.

Potential Water Retention Capacity as a Factor in Silage Effluent Control: Experiments with High Moisture By-product Feedstuffs.

Science.gov (United States)

Razak, Okine Abdul; Masaaki, Hanada; Yimamu, Aibibula; Meiji, Okamoto

2012-04-01

The role of moisture absorptive capacity of pre-silage material and its relationship with silage effluent in high moisture by-product feedstuffs (HMBF) is assessed. The term water retention capacity which is sometimes used in explaining the rate of effluent control in ensilage may be inadequate, since it accounts exclusively for the capacity of an absorbent incorporated into a pre-silage material prior to ensiling, without consideration to how much the pre-silage material can release. A new terminology, 'potential water retention capacity' (PWRC), which attempts to address this shortcoming, is proposed. Data were pooled from a series of experiments conducted separately over a period of five years using laboratory silos with four categories of agro by-products (n = 27) with differing moisture contents (highest 96.9%, lowest 78.1% in fresh matter, respectively), and their silages (n = 81). These were from a vegetable source (Daikon, Raphanus sativus), a root tuber source (potato pulp), a fruit source (apple pomace) and a cereal source (brewer's grain), respectively. The pre-silage materials were adjusted with dry in-silo absorbents consisting wheat straw, wheat or rice bran, beet pulp and bean stalks. The pooled mean for the moisture contents of all pre-silage materials was 78.3% (±10.3). Silage effluent decreased (p<0.01), with increase in PWRC of pre-silage material. The theoretical moisture content and PWRC of pre-silage material necessary to stem effluent flow completely in HMBF silage was 69.1% and 82.9 g/100 g in fresh matter, respectively. The high correlation (r = 0.76) between PWRC of ensiled material and silage effluent indicated that the latter is an important factor in silage-effluent relationship.

Feasibility Study of Hydrogen Production at Existing Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Stephen Schey

2009-07-01

Cooperative Agreement DE-FC07-06ID14788 was executed between the U.S. Department of Energy, Electric Transportation Applications, and Idaho National Laboratory to investigate the economics of producing hydrogen by electrolysis using electricity generated by nuclear power. The work under this agreement is divided into the following four tasks: Task 1 – Produce Data and Analyses Task 2 – Economic Analysis of Large-Scale Alkaline Electrolysis Task 3 – Commercial-Scale Hydrogen Production Task 4 – Disseminate Data and Analyses. Reports exist on the prospect that utility companies may benefit from having the option to produce electricity or produce hydrogen, depending on market conditions for both. This study advances that discussion in the affirmative by providing data and suggesting further areas of study. While some reports have identified issues related to licensing hydrogen plants with nuclear plants, this study provides more specifics and could be a resource guide for further study and clarifications. At the same time, this report identifies other area of risks and uncertainties associated with hydrogen production on this scale. Suggestions for further study in some of these topics, including water availability, are included in the report. The goals and objectives of the original project description have been met. Lack of industry design for proton exchange membrane electrolysis hydrogen production facilities of this magnitude was a roadblock for a significant period. However, recent design breakthroughs have made costing this facility much more accurate. In fact, the new design information on proton exchange membrane electrolyzers scaled to the 1 kg of hydrogen per second electrolyzer reduced the model costs from $500 to $100 million. Task 1 was delayed when the original electrolyzer failed at the end of its economic life. However, additional valuable information was obtained when the new electrolyzer was installed. Products developed during this study

Low SNR capacity for MIMO Rician and Rayleigh-product fading channels with single co-channel interferer and noise

KAUST Repository

Zhong, Caijun

2010-09-01

This paper studies the ergodic capacity of multiple-input multiple-output (MIMO) systems with a single co-channel interferer in the low signal-to-noise-ratio (SNR) regime. Two MIMO models namely Rician and Rayleigh-product channels are investigated. Exact analytical expressions for the minimum energy per information bit, {Eb/N0min, and wideband slope, S0, are derived for both channels. Our results show that the minimum energy per information bit is the same for both channels while their wideband slopes differ significantly. Further, the impact of the numbers of transmit and receive antennas, the Rician K factor, the channel mean matrix and the interference-to-noise-ratio (INR) on the capacity, is addressed. Results indicate that interference degrades the capacity by increasing the required minimum energy per information bit and reducing the wideband slope. Simulation results validate our analytical results. © 2010 IEEE.

Inventory management with advance capacity information

NARCIS (Netherlands)

Jaksic, M.; Fransoo, J.C.; Tan, T.; Kok, de A.G.; Rusjan, B.

2011-01-01

An important aspect of supply chain management is dealing with demand and supply uncertainty. The uncertainty of future supply can be reduced if a company is able to obtain advance capacity information (ACI) about future supply/production capacity availability from its supplier. We address a

Does Scientific Evidence for the Use of Natural Products in the Treatment of Oral Candidiasis Exist? A Systematic Review

Directory of Open Access Journals (Sweden)

Gabriela Lacet Silva Ferreira

2015-01-01

Full Text Available In view of the limitations of antifungal agents used in the treatment of oral candidiasis and the wide variety of natural products that have been studied as treatment of this disease, this systematic literature review proposed to evaluate whether scientific evidence attesting to the efficacy of natural products in the treatment of this disease exists. A systematic search in PubMed, MEDLINE, SciELO, Lilacs, and Cochrane Library databases was accomplished using the associations among the keywords Candida albicans, phytotherapy, biological products, denture stomatitis, and oral candidiasis in both English and Portuguese. Four independent observers evaluated the methodological quality of the resulting articles. Three studies were included for detailed analysis and evaluated according to the analysis protocol based on the CONSORT (Consolidated Standards of Reporting Trials 2010 statement. The tested products were different in all studies. Two studies mentioned random samples, but no study described the sample allocation. No study mentioned sample calculations, a prior pilot study, or examiner calibration, and only one trial reported sample losses. Differences between the tested products and the methodological designs among these studies did not allow the existence of scientific evidence related to the effectiveness of these products for the proposed subjects to be confirmed.

Wind farm production cost: Optimum turbine size and farm capacity in the actual market

Energy Technology Data Exchange (ETDEWEB)

Laali, A.R.; Meyer, J.L.; Bellot, C. [Electricite de France, Chatou (France); Louche, A. [Espace de Recherche, Ajaccio (France)

1996-12-31

Several studies are undertaken in R&D Division of EDF in collaboration with ERASME association in order to have a good knowledge of the wind energy production costs. These studies are performed in the framework of a wind energy monitoring project and concern the influence of a few parameters like wind farm capacity, turbine size and wind speed on production costs, through an analysis of the actual market trend. Some 50 manufacturers and 140 different kind of wind turbines are considered for this study. The minimum production cost is situated at 800/900 kW wind turbine rated power. This point will probably move to more important powers in the future. This study is valid only for average conditions and some special parameters like particular climate conditions or lack of infrastructure for a special site the could modify the results shown on the curves. The variety of wind turbines (rated power as a function of rotor diameter, height and specific rated power) in the actual market is analyzed. A brief analysis of the market trend is also performed. 7 refs., 7 figs.

Tissue advanced glycation end products are associated with diastolic function and aerobic exercise capacity in diabetic heart failure patients

NARCIS (Netherlands)

Willemsen, Suzan; Hartog, Jasper W. L.; Hummel, Yoran M.; van Ruijven, Marieke H. I.; van der Horst, Iwan C. C.; van Veldhuisen, Dirk J.; Voors, Adriaan A.

Aims Advanced glycation end products (AGEs) are increased in patients with diabetes and are associated with diastolic dysfunction through the formation of collagen crosslinks in the heart. The association among AGEs, diastolic function, and aerobic capacity in heart failure (HF) patients with and

A simple dynamic energy capacity model

International Nuclear Information System (INIS)

Gander, James P.

2012-01-01

I develop a simple dynamic model showing how total energy capacity is allocated to two different uses and how these uses and their corresponding energy flows are related and behave through time. The control variable of the model determines the allocation. All the variables of the model are in terms of a composite energy equivalent measured in BTU's. A key focus is on the shadow price of energy capacity and its behavior through time. Another key focus is on the behavior of the control variable that determines the allocation of overall energy capacity. The matching or linking of the model's variables to real world U.S. energy data is undertaken. In spite of some limitations of the data, the model and its behavior fit the data fairly well. Some energy policy implications are discussed. - Highlights: ► The model shows how energy capacity is allocated to current output production versus added energy capacity production. ► Two variables in the allocation are the shadow price of capacity and the control variable that determines the allocation. ► The model was linked to U.S. historical energy data and fit the data quite well. ► In particular, the policy control variable was cyclical and consistent with the model. ► Policy implications relevant to the allocation of energy capacity are discussed briefly.

Towards the integration of sustainable infrastructure into the existing built environment

Directory of Open Access Journals (Sweden)

Dimitrijević Branka

2013-01-01

Full Text Available The construction sector in the United Kingdom is dominated by small and medium size enterprises (SMEs which have less than 250 employees and usually do not have research capacities to develop a range of low carbon innovations applicable in the construction sector. Various European and national funding programmes have addressed this problem by providing funding for research collaboration between universities and SMEs. The paper provides a selection of the outputs of academic/industry research, undertaken by seven Scottish universities through the project CIC Start Online from September 2009 until February 2013, related to low carbon planning, building design, technologies, construction, refurbishment and performance. The studies either contributed to the further development of existing products or processes, or tested new products or processes, often developed for a specific project with a potential for application in future projects. Online dissemination of the project outcomes has assisted in attracting membership across Scotland, the United Kingdom and internationally. Along with the low carbon building products and technologies, new low carbon infrastructure is being planned and developed in order to provide connections and services for energy generation from renewables, energy storage and decentralised distribution, water management (harvesting, saving and reuse, waste management (reduction, reuse and to-energy, transport (electric vehicles, cycling and walking and information communication technology (ICT for monitoring and managing infrastructure systems. The second part of the paper outlines how innovations for integration of sustainable infrastructure into the existing built environment will be supported through the follow-on joint project of nine Scottish universities, named Mainstreaming Innovation.

Determining the production capacity of train transportation for overburden removal

Energy Technology Data Exchange (ETDEWEB)

Knahl, G; Szabados, L; Nowotny, A

1980-02-01

Details of two computer programs developed at the Institute of Energetics in Leipzig, GDR for use on large BESM-6 computer of the Institute are provided. One is the so-called time funds program concentrating on coal and overburden output, production time requirements and time losses. The other is a simulation program for overburden removal by train. It includes 14 pieces of heavy mining equipment, six industrial consumers and a rail network with 80 connections and 40 trains. The program was used with success in 1979 and will be further developed. Additional utilization is seen in projecting transportation in new surface mines, optimizing rail transport in existing mines for the preparation of annual train transportation plans. (In German)

Inventory management with advance capacity information

NARCIS (Netherlands)

Jaksic, M.; Fransoo, J.C.; Tan, T.; Kok, de A.G.; Rusjan, B.

2008-01-01

One of the important aspects of supply chain management is dealing with demand and supply uncertainty. The uncertainty of future supply can be reduced, if a company is able to obtain advance capacity information (ACI) on future supply/production capacity availability from its supplier. We address a

Mitochondrial Physiology in the Major Arbovirus Vector Aedes aegypti: Substrate Preferences and Sexual Differences Define Respiratory Capacity and Superoxide Production

Science.gov (United States)

Soares, Juliana B. R. Correa; Gaviraghi, Alessandro; Oliveira, Marcus F.

2015-01-01

Adult females of Aedes aegypti are facultative blood sucking insects and vectors of Dengue and yellow fever viruses. Insect dispersal plays a central role in disease transmission and the extremely high energy demand posed by flight is accomplished by a very efficient oxidative phosphorylation process, which take place within flight muscle mitochondria. These organelles play a central role in energy metabolism, interconnecting nutrient oxidation to ATP synthesis, but also represent an important site of cellular superoxide production. Given the importance of mitochondria to cell physiology, and the potential contributions of this organelle for A. aegypti biology and vectorial capacity, here, we conducted a systematic assessment of mitochondrial physiology in flight muscle of young adult A. aegypti fed exclusively with sugar. This was carried out by determining the activities of mitochondrial enzymes, the substrate preferences to sustain respiration, the mitochondrial bioenergetic efficiency and capacity, in both mitochondria-enriched preparations and mechanically permeabilized flight muscle in both sexes. We also determined the substrates preferences to promote mitochondrial superoxide generation and the main sites where it is produced within this organelle. We observed that respiration in A. aegypti mitochondria was essentially driven by complex I and glycerol 3 phosphate dehydrogenase substrates, which promoted distinct mitochondrial bioenergetic capacities, but with preserved efficiencies. Respiration mediated by proline oxidation in female mitochondria was strikingly higher than in males. Mitochondrial superoxide production was essentially mediated through proline and glycerol 3 phosphate oxidation, which took place at sites other than complex I. Finally, differences in mitochondrial superoxide production among sexes were only observed in male oxidizing glycerol 3 phosphate, exhibiting higher rates than in female. Together, these data represent a significant step

Mammalian cell culture capacity for biopharmaceutical manufacturing.

Science.gov (United States)

Ecker, Dawn M; Ransohoff, Thomas C

2014-01-01

: With worldwide sales of biopharmaceuticals increasing each year and continuing growth on the horizon, the manufacture of mammalian biopharmaceuticals has become a major global enterprise. We describe the current and future industry wide supply of manufacturing capacity with regard to capacity type, distribution, and geographic location. Bioreactor capacity and the use of single-use products for biomanufacturing are also profiled. An analysis of the use of this capacity is performed, including a discussion of current trends that will influence capacity growth, availability, and utilization in the coming years.

Report on DOE analytical laboratory capacity available to meet EM environmental sampling and analysis needs for FY 93-99

International Nuclear Information System (INIS)

1994-01-01

The DOE Analytical Laboratory Capacity Study was conducted to give EM-263 current information about existing and future analytical capacities and capabilities of site laboratories within the DOE Complex. Each DOE site may have one or more analytical laboratories in operation. These facilities were established to support site missions such as production, research and development, and personnel and environmental monitoring. With changing site missions and the DOE directives for environmental monitoring and cleanup, these laboratories are either devoting or planning to devote resources to support EM activities. The DOE site laboratories represent a considerable amount of capital investment and analytical capability, capacity, and expertise that can be applied to support the EM mission. They not only provide cost-effective high-volume analytical laboratory services, but are also highly recognized analytical research and development centers. Several sites have already transferred their analytical capability from traditional production support to environmental monitoring and waste management support. A model was developed to determine the analytical capacity of all laboratories in the DOE Complex. The model was applied at nearly all the major laboratories and the results collected from these studies are summarized in this report

Alluvial diamond resource potential and production capacity assessment of the Central African Republic

Science.gov (United States)

Chirico, Peter G.; Barthelemy, Francis; Ngbokoto, Francois A.

2010-01-01

In May of 2000, a meeting was convened in Kimberley, South Africa, and attended by representatives of the diamond industry and leaders of African governments to develop a certification process intended to assure that rough, exported diamonds were free of conflict concerns. This meeting was supported later in 2000 by the United Nations in a resolution adopted by the General Assembly. By 2002, the Kimberly Process Certification Scheme (KPCS) was ratified and signed by diamond-producing and diamond-importing countries. Over 70 countries were included as members of the KPCS at the end of 2007. To prevent trade in "conflict diamonds" while protecting legitimate trade, the KPCS requires that each country set up an internal system of controls to prevent conflict diamonds from entering any imported or exported shipments of rough diamonds. Every diamond or diamond shipment must be accompanied by a Kimberley Process (KP) certificate and be contained in tamper-proof packaging. The objective of this study was (1) to assess the naturally occurring endowment of diamonds in the Central African Republic (potential resources) based on geological evidence, previous studies, and recent field data and (2) to assess the diamond-production capacity and measure the intensity of mining activity. Several possible methods can be used to estimate the potential diamond resource. However, because there is generally a lack of sufficient and consistent data recording all diamond mining in the Central African Republic and because time to conduct fieldwork and accessibility to the diamond mining areas are limited, two different methodologies were used: the volume and grade approach and the content per kilometer approach. Estimates are that approximately 39,000,000 carats of alluvial diamonds remain in the eastern and western zones of the CAR combined. This amount is roughly twice the total amount of diamonds reportedly exported from the Central African Republic since 1931. Production capacity is

Capacity building for sustainable energy development

International Nuclear Information System (INIS)

Rogner, Hans-Holger

2006-01-01

Capacity Building for Sustainable Energy Development - Mission: To build capacity in Member States (MS) for comprehensive energy system, economic and environmental analyses to assist in: - making informed policy decisions for sustainable energy development; - assessing the role of nuclear power; - understanding environmental and climate change issues related to energy production and use

Implementing Estimation of Capacity for Freeway Sections

Directory of Open Access Journals (Sweden)

Chang-qiao Shao

2011-01-01

Full Text Available Based on the stochastic concept for freeway capacity, the procedure of capacity estimation is developed. Due to the fact that it is impossible to observe the value of the capacity and to obtain the probability distribution of the capacity, the product-limit method is used in this paper to estimate the capacity. In order to implement estimation of capacity using this technology, the lifetime table based on statistical methods for lifetime data analysis is introduced and the corresponding procedure is developed. Simulated data based on freeway sections in Beijing, China, were analyzed and the results indicate that the methodology and procedure are applicable and validated.

Capacity of Physiotherapy Workforce Production in Thailand: Public-Private Mix, Secular Trend and Geographic Distribution.

Science.gov (United States)

Kaewsawang, Sarinee; Chongsuvivatwong, Virasakdi; Vongsirinavarat, Mantana

2016-06-01

In Thailand, the shortage of physiotherapists has been an increasing concern because of increased health burden from demographic and epidemiologic changes. This study aims to analyse the current situation of the physiotherapy workforce production system, secular trend, geographical distribution and comparison of public and private physiotherapy training institutes. Longitudinal data related to production capacity of the physiotherapy institutes were applied. Data from 2008 to 2012 were obtained from all 16 physiotherapy institutes in Thailand. Data during 2000-2007 were also retrieved from annual reports from the Ministry of Education. Descriptive statistics were initially used. Comparison was made between public and private physiotherapy institutes in terms of the number of students admitted and graduated, number of teachers, annual tuition fee, student-teacher ratio and dropout rate within 1 year. Predictive factors for graduation within 4 years were determined using logistic regression. In Thailand, there was an average of 800 physiotherapy graduates per year. New private institutes have been recently established and have steadily increased student admission rates. However, this has resulted in a high student-teacher ratio (median 7.1, inter-quartile range (IQR) 5.9-10.0). The first-year dropout rate in 2012 was 29.1%. Geographically, the majority of the institutes are clustered in the central region. Multivariate analysis revealed significantly lower probability of graduation within 4 years among students admitted to the private institutes and those in non-north-east region. The production capacity of the physiotherapy workforce is below an estimated need. Private physiotherapy institutes need more support to improve the situation of staff shortages and student graduation rates. The non-central regions should be encouraged to produce more physiotherapists. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Capacity waste management at automotive industry in India: A Six Sigma observation

Directory of Open Access Journals (Sweden)

Rajeev Rathi

2015-11-01

Full Text Available The companies in present challenging world are trying hard to improve their productivity and capacity utilization levels without actually increasing the sale price of their products. In India, in today combative world, the majority of automotive manufacturing industries are scuffling hard with their low levels of productivity. Possibly there are different reasons for this and capacity waste or under-utilization of productive capacity in industries appears to be one of the prime reasons. As corrective action, the present study makes an effort to check the efficacy of Six Sigma approach to improve capacity waste management. With a case study, through successful execution of Define phase, the study confirms the perception of Six Sigma for capacity waste management in Indian automotive industry.

Can Brazil play a more important role in global tuberculosis drug production? An assessment of current capacity and challenges.

Science.gov (United States)

Gemal, Andre; Keravec, Joel; Menezes, Alexandre; Trajman, Anete

2013-03-27

Despite the existence of effective treatment, tuberculosis is still a global public health issue. The World Health Organization recommends a six-month four-drug regimen in fixed-dose combination formulation to treat drug sensitive tuberculosis, and long course regimens with several second-line drugs to treat multi-drug resistant tuberculosis. To achieve the projected tuberculosis elimination goal by 2050, it will be essential to ensure a non-interrupted supply of quality-assured tuberculosis drugs. However, quality and affordable tuberculosis drug supply is still a significant challenge for National Tuberculosis Programs. Quality drug production requires a combination of complex steps. The first challenge is to guarantee the quality of tuberculosis active pharmaceutical ingredients, then ensure an adequate manufacturing process, according to international standards, to guarantee final product's safety, efficacy and quality. Good practices for storage, transport, distribution and quality control procedures must follow. In contrast to other high-burden countries, Brazil produces tuberculosis drugs through a strong network of public sector drug manufacturers regulated by a World Health Organization-certified national sanitary authority. The installed capacity for production surpasses the 71,000 needed treatments in the country. However, in order to be prepared to act as a global supplier, important bottlenecks are to be overcome. This article presents an in-depth analysis of the current status of production of tuberculosis drugs in Brazil and the bottlenecks and opportunities for the country to sustain national demand and play a role as a potential global supplier. Raw material and drug production, quality control, international certification and pre-qualification, political commitment and regulatory aspects are discussed, as well recommendations for tackling these bottlenecks. This discussion becomes more important as new drugs and regimens to treat tuberculosis are

New capacity and the status of major projects

International Nuclear Information System (INIS)

Osborne, R.; Eastman, P.; Bajc, F.; Hawthorne, D.

2003-01-01

This session included highlights from from four guest speakers who were asked to comment on new electricity capacity in Ontario and the status of major projects. The summer of 2002 was one of the hottest on record in Ontario and presented a challenge for suppliers of electricity to meet demand. Some of the extra demand was met by interties. Imports provided 5 per cent of consumption in July and 8 per cent in August. TransAlta and ATCO are currently involved in 2 major projects to add generation capacity. In addition, Ontario Power Generation is getting more production from its existing nuclear plants and has made significant investment to get greater efficiency and increase safety margins at the plants. One panelist suggested that nuclear power is a key part of meeting Canada's Kyoto greenhouse reduction obligations. It was emphasized that market participants should allow time to let the market work and let a free market respond to price signals. It was argued that consumers expect and rely too much on low-cost electricity and are therefore not encouraged to conserve energy or look into new generation requirements. figs

Neuroscience-related research in Ghana: a systematic evaluation of direction and capacity.

Science.gov (United States)

Quansah, Emmanuel; Karikari, Thomas K

2016-02-01

Neurological and neuropsychiatric diseases account for considerable healthcare, economic and social burdens in Ghana. In order to effectively address these burdens, appropriately-trained scientists who conduct high-impact neuroscience research will be needed. Additionally, research directions should be aligned with national research priorities. However, to provide information about current neuroscience research productivity and direction, the existing capacity and focus need to be identified. This would allow opportunities for collaborative research and training to be properly explored and developmental interventions to be better targeted. In this study, we sought to evaluate the existing capacity and direction of neuroscience-related research in Ghana. To do this, we examined publications reporting research investigations authored by scientists affiliated with Ghanaian institutions in specific areas of neuroscience over the last two decades (1995-2015). 127 articles that met our inclusion criteria were systematically evaluated in terms of research foci, annual publication trends and author affiliations. The most actively-researched areas identified include neurocognitive impairments in non-nervous system disorders, depression and suicide, epilepsy and seizures, neurological impact of substance misuse, and neurological disorders. These studies were mostly hospital and community-based surveys. About 60% of these articles were published in the last seven years, suggesting a recent increase in research productivity. However, data on experimental and clinical research outcomes were particularly lacking. We suggest that future investigations should focus on the following specific areas where information was lacking: large-scale disease epidemiology, effectiveness of diagnostic platforms and therapeutic treatments, and the genetic, genomic and molecular bases of diseases.

Reconsidering the Capacity Credit of Wind Power: Application of Cumulative Prospect Theory

NARCIS (Netherlands)

Wilton, E.; Delarue, E.; D'haeseleer, W.; Sark, W.G.J.H.M. van

2014-01-01

The capacity credit is often erroneously considered to be a time-invariant quantity. A multi-year analysis of the incident wind profile of various potential wind sites uncovered that there exist large differences between annual capacity credit figures. The uniformity of these capacity credit

Reconsidering the capacity credit of wind power : Application of cumulative prospect theory

NARCIS (Netherlands)

Wilton, Edgar; Delarue, Erik; D'haeseleer, William; van Sark, Wilfried

The capacity credit is often erroneously considered to be a time-invariant quantity. A multi-year analysis of the incident wind profile of various potential wind sites uncovered that there exist large differences between annual capacity credit figures. The uniformity of these capacity credit figures

Safety considerations for continuous hydrogen production test apparatus with capacity of 50 N-litter hydrogen per hour

International Nuclear Information System (INIS)

Onuki, Kaoru; Akino, Norio; Shimizu, Saburo; Nakajima, Hayato; Higashi, Shunichi; Kubo, Shinji

2001-03-01

Since the thermochemical hydrogen production Iodine-Sulfur process decomposes water into hydrogen and oxygen using toxic chemicals such as sulfuric acid, iodine and hydriodic acid, safety considerations are very important in its research and development. Therefore, before construction of continuous hydrogen production test apparatus with capacity of 50 N-litter hydrogen per hour, comprehensive safety considerations were carried out to examine the design and construction works of the test apparatus, and the experimental plans using the apparatus. Emphasis was given on the safety considerations on prevention of breakage of glasswares and presumable abnormalities, accidents and their countermeasures. This report summarizes the results of the considerations. (author)

Production Decision Based on Discounted Price and Delivery Frequency for Garment Original Equipment Manufacturer with Constrained Capacity

Institute of Scientific and Technical Information of China (English)

HUO Yanfang; GU Yajie; HAN Lin; WANG Xize

2017-01-01

Original equipment manufacturers (OEM) have never been so important and powerful as it is today in garment manufacturing industry.The OEM supplier's production decisions always have a great impact on the market performance and the profits of a garment brand manufacturer.With constrained capacity and multiply buyers,how to make reasonable production decisions is an urgent problem for OEM suppliers.A price discount model with a single OEM supplier and two buyers is proposed to deal with the problem.Based on this model,the OEM supplier could satisfy buyers' demands and guarantee their profits as well through adjusting price and delivery frequency.A numerical example validates the validity of the model.

Financial accounting as a method of household finance capacity valuation

Directory of Open Access Journals (Sweden)

A. B. Untanov

2017-01-01

Full Text Available The article presents existing household finance capacity investigations. Comparison conducting allowed to determinate collisions and flaws of previous works. That substantiates to find a new approach in household finance capacity valuation necessity. The article contains theoretical research of household finance fundamental categories. In particular, it notes significant difference between domestic and foreign experience of household finance determination. Although emphasizing key similarities allows identifying household finance capacity composition. Moreover, the article provides a public and corporate finance sectors experience, which contains a huge knowledge of finance capacity investigations. Used research allows classify finance capacity not only as a resource valuation, but also as an economic entity’s ability to generate financial result. In terms of resource valuation, the paper suggests assessing both financial resources in classical meaning and any other property, which participating household economic activity and could be evaluated. The author’s position in terms of household finance capacity valuation is suggested. A broad definition of finance capacity causes applying conceptually different approach in this paper. Thus, comparative analysis method is suggested to substantiate household and corporate firm similarities. Used method allows forming household financial accounting, which leads to clear determination of household finance capacity composition and structure. Specificity forming household financial accounting is considered. An author’s position in regards existing contradictions with early research is suggested.

Estimation of the behavior factor of existing RC-MRF buildings

Science.gov (United States)

Vona, Marco; Mastroberti, Monica

2018-01-01

In recent years, several research groups have studied a new generation of analysis methods for seismic response assessment of existing buildings. Nevertheless, many important developments are still needed in order to define more reliable and effective assessment procedures. Moreover, regarding existing buildings, it should be highlighted that due to the low knowledge level, the linear elastic analysis is the only analysis method allowed. The same codes (such as NTC2008, EC8) consider the linear dynamic analysis with behavior factor as the reference method for the evaluation of seismic demand. This type of analysis is based on a linear-elastic structural model subject to a design spectrum, obtained by reducing the elastic spectrum through a behavior factor. The behavior factor (reduction factor or q factor in some codes) is used to reduce the elastic spectrum ordinate or the forces obtained from a linear analysis in order to take into account the non-linear structural capacities. The behavior factors should be defined based on several parameters that influence the seismic nonlinear capacity, such as mechanical materials characteristics, structural system, irregularity and design procedures. In practical applications, there is still an evident lack of detailed rules and accurate behavior factor values adequate for existing buildings. In this work, some investigations of the seismic capacity of the main existing RC-MRF building types have been carried out. In order to make a correct evaluation of the seismic force demand, actual behavior factor values coherent with force based seismic safety assessment procedure have been proposed and compared with the values reported in the Italian seismic code, NTC08.

High Capacity cylinder roller bearing; High Capacity Zylinderrollenlager. Ein vollrolliges Lager mit Kaefig

Energy Technology Data Exchange (ETDEWEB)

Reichert, J.; Baum, J. [SKF, Schweinfurt (Germany)

2007-07-15

The high capacity cylinder roller bearing is an example for continuous development of SKF products and does an effective contribution to increase operational safety and offers the possibility to reduce weight and compact design. (GL)

Comparative Quantitative Assessments of Salivary Ion Activity Product for Hydroxyapatite and Buffering Capacity in Children with Different Caries Experience.

Science.gov (United States)

Anand, Siddharth; Masih, Updesh; Yeluri, Ramakrishna

If a relation exists between salivary I PHA , buffer capacity and caries experience, then this relationship could be used as screening chair side test for caries risk assessment. One hundred ninety seven children aged 4 to 6 years were examined. Data was collected by interview and clinical examination. They were divided into low, moderate and high caries experience group of 20 children each. Two ml of each sample was used to measure the pH value with pH meter. Regarding the buffering capacity, freshly prepared hydrochloric acid (HCl) was titrated into saliva and pH was recorded. The collected saliva samples were sent to Laboratory for measurement of calcium and phosphorus. I PHA was calculated and the negative logarithms of I PHA were used to determine the enamel solubility. The correlation between salivary I PHA , buffering capacity and caries experience were evaluated. There was a significant relation between pH, log I PHA and dental caries experience, it could be considered as a predictor of dental caries. pH measurement after HCl titration in saliva could be used as chair side screening test for the assessment of caries risk.

Heritability of polyphenols, anthocyanins and antioxidant capacity of ...

African Journals Online (AJOL)

ALL

They can increase the antioxidant capacity ... cytokines, while increasing the production of anti- inflammatory ...... Evaluation of bitterness and astringency of ... phytochemicals and a higher antioxidant capacity than teas and red wine. J. Agric.

Interference and memory capacity limitations.

Science.gov (United States)

Endress, Ansgar D; Szabó, Szilárd

2017-10-01

Working memory (WM) is thought to have a fixed and limited capacity. However, the origins of these capacity limitations are debated, and generally attributed to active, attentional processes. Here, we show that the existence of interference among items in memory mathematically guarantees fixed and limited capacity limits under very general conditions, irrespective of any processing assumptions. Assuming that interference (a) increases with the number of interfering items and (b) brings memory performance to chance levels for large numbers of interfering items, capacity limits are a simple function of the relative influence of memorization and interference. In contrast, we show that time-based memory limitations do not lead to fixed memory capacity limitations that are independent of the timing properties of an experiment. We show that interference can mimic both slot-like and continuous resource-like memory limitations, suggesting that these types of memory performance might not be as different as commonly believed. We speculate that slot-like WM limitations might arise from crowding-like phenomena in memory when participants have to retrieve items. Further, based on earlier research on parallel attention and enumeration, we suggest that crowding-like phenomena might be a common reason for the 3 major cognitive capacity limitations. As suggested by Miller (1956) and Cowan (2001), these capacity limitations might arise because of a common reason, even though they likely rely on distinct processes. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Properties and Antioxidant Capacity of Anchovy (Engraulis encrasicholus) By-Product Protein Films Containing Thyme Essential Oil.

Science.gov (United States)

Tural, Serpil; Turhan, Sadettin

2017-03-01

In this study, some properties and antioxidant capacity of anchovy ( Engraulis encrasicholus ) by-product protein films with added 0.5, 1.0 and 1.5% of thyme essential oil were investigated. The films with thyme essential oil had higher elongation at break, water vapour permeability and oxygen permeability, lower solubility and tensile strength than control film (p<0.05). The incorporation of thyme essential oil affected transparency values of the films, but only the addition of 1.5% of thyme essential oil significantly reduced the transparency (p<0.05). In the film matrix, molecular organisation and intermolecular interaction were changed by thyme essential oil addition. The films with thyme essential oil had a heterogeneous surface and a relatively smooth cross-section structure. Slightly higher phase transition and lower glass transition temperatures were observed in films with thyme essential oil. The antioxidant capacity of the films was improved by incorporating thyme essential oil depending on its volume fraction.

The conflation of competence and capacity in english medical law: a philosophical critique.

Science.gov (United States)

Bielby, Philip

2005-01-01

Ethical and legal discourse pertaining to the ability to consent to treatment and research in England operates within a dualist framework of "competence" and "capacity". This is confusing, as while there exists in England two possible senses of legal capacity -- "first person" legal capacity and "delegable" legal capacity, currently neither is formulated to bear a necessary relationship with decision-making competence. Notwithstanding this, judges and academic commentators frequently invoke competence to consent in discussions involving the validity of offering or withholding consent as a synonym for legal capacity to consent. I argue that this gives rise to a conflation, jeopardising clarity and consistency in law. This is somewhat less problematic in instances of "first-person" legal capacity that are heavily informed by criteria for decision-making competence than in the second sense of legal capacity, which is qualitatively different from decision-making competence, or with first-person legal capacity when defined in different terms from competence. The paper concludes by proposing that the soundest resolution to this problem is by making decision-making competence a necessary and sufficient condition of first-person legal capacity, affording a more scrupulous distinction between the two different forms of legal capacity that exist.

Increasing Capacity Exploitation in Food Supply Chains Using Grid Concepts

Science.gov (United States)

Volk, Eugen; Müller, Marcus; Jacob, Ansger; Racz, Peter; Waldburger, Martin

Food supply chains today are characterized by fixed trade relations with long term contracts established between heterogeneous supply chain companies. Production and logistics capacities of these companies are often utilized in an economically inefficient manner only. In addition, increased consumer awareness in food safety issues renders supply chain management even more challenging, since integrated tracking and tracing along the whole food supply chain is needed. Facing these issues of supply chain management complexity and completely documented product quality, this paper proposes a full lifecycle solution for dynamic capacity markets based on concepts used in the field of Grid [1], like management of Virtual Organization (VO) combined with Service Level Agreement (SLA). The solution enables the cost-efficient utilization of real world capacities (e.g., production capacities or logistics facilities) by using a simple, browser-based portal. Users are able to enter into product-specific negotiations with buyers and suppliers of a food supply chain, and to obtain real-time access to product information including SLA evaluation reports. Thus, business opportunities in wider market access, process innovation, and trustworthy food products are offered for participating supply chain companies.

Driving improvements in emerging disease surveillance through locally relevant capacity strengthening.

Science.gov (United States)

Halliday, Jo E B; Hampson, Katie; Hanley, Nick; Lembo, Tiziana; Sharp, Joanne P; Haydon, Daniel T; Cleaveland, Sarah

2017-07-14

Emerging infectious diseases (EIDs) threaten the health of people, animals, and crops globally, but our ability to predict their occurrence is limited. Current public health capacity and ability to detect and respond to EIDs is typically weakest in low- and middle-income countries (LMICs). Many known drivers of EID emergence also converge in LMICs. Strengthening capacity for surveillance of diseases of relevance to local populations can provide a mechanism for building the cross-cutting and flexible capacities needed to tackle both the burden of existing diseases and EID threats. A focus on locally relevant diseases in LMICs and the economic, social, and cultural contexts of surveillance can help address existing inequalities in health systems, improve the capacity to detect and contain EIDs, and contribute to broader global goals for development. Copyright © 2017, American Association for the Advancement of Science.

Enhancing the Feed Capacity of Horticulture Agro-Ecosystem Through Technology for Goat Production

Directory of Open Access Journals (Sweden)

Simon P Ginting

2011-09-01

Full Text Available The availability of feed and their efficiency of use throughout the year represent the most important constraint affecting the productivity of animals in any agro-ecosystems. Beside being the largest contributor to the total production cost, logistically feeds need to be available on a daily basis across the animal’s life time. In order to be competitive, goat production system must be directed toward the optimum utilization of inconventional feedstuffs such as crop residues and agro-industrial by-products. The horticulture crops provide various crop-residues and by products from the processing of its main products. These biomass are potential feedstuffs that could be used to support the production of goats. The processing of passion fruits (Passiflora edulis yield by products such as fruit shells and seeds. These products are good energy and protein sources for growing goats. Oriental radish (Raphanus sativus by-products composed by damaged root parts and culls have high digestible energy and low ether extract content, but have very high moisture content. The pineapple by-products composed by the peel and bagasse of the fruit could be used as energy source for goats. Other horticulture by-products or residues such as citrus pulp, abandoned citrus fruit, forages from Ipomea batatas are of great potential as feeds for goat production. Preserving technology like ensiling could be implemented in utilising those biomass categorized as wet by-products such as pineapple and oriental radish by-products. The technology of complete feed is an effective means in utilizing some of those products with relatively low palatability or to increase its inclusion level in diets. Introducing shade-tolerant forage species as intercrops such as Stenotaphrum secundatum, Brachiaria humidicola and Arachis pintoi in the citrus plantation should increase feed capacity of the area. The multi-purpose trees such as Indigofera sp. and Calliandra calothyrsus both are

Heat Capacity Analysis Report

International Nuclear Information System (INIS)

Findikakis, A.

2004-01-01

The purpose of this report is to provide heat capacity values for the host and surrounding rock layers for the waste repository at Yucca Mountain. The heat capacity representations provided by this analysis are used in unsaturated zone (UZ) flow, transport, and coupled processes numerical modeling activities, and in thermal analyses as part of the design of the repository to support the license application. Among the reports that use the heat capacity values estimated in this report are the ''Multiscale Thermohydrologic Model'' report, the ''Drift Degradation Analysis'' report, the ''Ventilation Model and Analysis Report, the Igneous Intrusion Impacts on Waste Packages and Waste Forms'' report, the ''Dike/Drift Interactions report, the Drift-Scale Coupled Processes (DST and TH Seepage) Models'' report, and the ''In-Drift Natural Convection and Condensation'' report. The specific objective of this study is to determine the rock-grain and rock-mass heat capacities for the geologic stratigraphy identified in the ''Mineralogic Model (MM3.0) Report'' (BSC 2004 [DIRS 170031], Table 1-1). This report provides estimates of the heat capacity for all stratigraphic layers except the Paleozoic, for which the mineralogic abundance data required to estimate the heat capacity are not available. The temperature range of interest in this analysis is 25 C to 325 C. This interval is broken into three separate temperature sub-intervals: 25 C to 95 C, 95 C to 114 C, and 114 C to 325 C, which correspond to the preboiling, trans-boiling, and postboiling regimes. Heat capacity is defined as the amount of energy required to raise the temperature of a unit mass of material by one degree (Nimick and Connolly 1991 [DIRS 100690], p. 5). The rock-grain heat capacity is defined as the heat capacity of the rock solids (minerals), and does not include the effect of water that exists in the rock pores. By comparison, the rock-mass heat capacity considers the heat capacity of both solids and pore

Estimation of marginal costs at existing waste treatment facilities

DEFF Research Database (Denmark)

Martinez Sanchez, Veronica; Hulgaard, Tore; Hindsgaul, Claus

2016-01-01

, marginal costs were not (provided a response was initiated at the WtE to keep constant the utilized thermal capacity). Failing to systematically address and include costs in existing waste facilities in decision-making may unintendedly lead to higher overall costs at societal level. To avoid misleading...... a constant thermal load, (ii) Refused-Derived-Fuel (RDF) was included to maintain a constant thermal load, or (iii) no reaction occurred resulting in a reduced waste throughput without full utilization of the facility capacity. Results demonstrated that marginal costs of diversion from WtE were up to eleven...

Assessing institutional capacities to adapt to climate change: integrating psychological dimensions in the Adaptive Capacity Wheel

Science.gov (United States)

Grothmann, T.; Grecksch, K.; Winges, M.; Siebenhüner, B.

2013-12-01

Several case studies show that social factors like institutions, perceptions and social capital strongly affect social capacities to adapt to climate change. Together with economic and technological development they are important for building social capacities. However, there are almost no methodologies for the systematic assessment of social factors. After reviewing existing methodologies we identify the Adaptive Capacity Wheel (ACW) by Gupta et al. (2010), developed for assessing the adaptive capacity of institutions, as the most comprehensive and operationalised framework to assess social factors. The ACW differentiates 22 criteria to assess 6 dimensions: variety, learning capacity, room for autonomous change, leadership, availability of resources, fair governance. To include important psychological factors we extended the ACW by two dimensions: "adaptation motivation" refers to actors' motivation to realise, support and/or promote adaptation to climate; "adaptation belief" refers to actors' perceptions of realisability and effectiveness of adaptation measures. We applied the extended ACW to assess adaptive capacities of four sectors - water management, flood/coastal protection, civil protection and regional planning - in northwestern Germany. The assessments of adaptation motivation and belief provided a clear added value. The results also revealed some methodological problems in applying the ACW (e.g. overlap of dimensions), for which we propose methodological solutions.

Appendices to report on DOE analytical laboratory capacity available to meet EM environmental sampling and analysis needs for FY 93-99

International Nuclear Information System (INIS)

1994-01-01

The DOE Analytical Laboratory Capacity Study was conducted to give EM-263 current information about existing and future analytical capacities and capabilities of site laboratories within the DOE Complex. Each DOE site may have one or more analytical laboratories in operation. These facilities were established to support site missions such as production, research and development, and personnel and environmental monitoring. With changing site missions and the DOE directives for environmental monitoring and cleanup, these laboratories are either devoting or planning to devote resources to support EM activities. The DOE site laboratories represent a considerable amount of capital investment and analytical capability, capacity, and expertise that can be applied to support the EM mission. They not only provide cost-effective high-volume analytical laboratory services, but are also highly recognized analytical research and development centers. Several sites have already transferred their analytical capability from traditional production support to environmental monitoring and waste management support. A model was developed to determine the analytical capacity of all laboratories in the DOE Complex. The model was applied at nearly all the major laboratories and the results collected from these studies are summarized in this report

Volume Flexibility and Capacity Investment : A Real Options Approach

NARCIS (Netherlands)

Wen, X.; Kort, P.M.; Talman, A.J.J.

2015-01-01

This paper considers the investment decision of a firm where it has to decide about the timing and capacity. We obtain that in a fast growing market, right after investment the firm produces below capacity, where the utilization rate (the proportion of capacity that is used for production right

Volume flexibility and capacity investment: a real options approach

NARCIS (Netherlands)

Wen, Xingang; Kort, Peter; Talman, Dolf

2017-01-01

This paper considers the investment decision of a firm where it has to decide about the timing and capacity. We obtain that in a fast-growing market, right after investment the firm produces below capacity, where the utilization rate (the proportion of capacity that is used for production right

Production capacity of biomass of the floodpain community of Salix alba L. in southern Moravia

Directory of Open Access Journals (Sweden)

Diana López

2007-01-01

Full Text Available The paper deals with the study of the production capacity of biomass in the seven-year stand of Salix alba L. The communities originated in the process of primary succession in the area of the middle Nové Mlýny reservoir on a newly established island. Already since the first stages, the communities have been monitored. Results have shown that white willow behaves as an R-strategist with fast growth in youth. Moreover, the growth is supported by optimum environmental conditions (soils richly supplied with nutrients and water, long growing season. Accumulated phytomass amounted 102,7 t.ha−1 at the age of 7 years and the yield reached a mean annual increment of 15 t.ha−1.year−1. Communities of white willow rank among highly productive phytocoenoses capable of fixing considerable amounts of carbon and, at the same time fulfilling the function of habitat corridors.

Heave induced reduction of friction capacity of pile embedded in clays

OpenAIRE

Setyo Budi Gogot; Wibowo Tantri Gondo

2017-01-01

Installation of new piles may cause heave which influence friction capacity of existing piles. The heave can be observed from the difference in the elevation of existing pile heads recorded before and after the installation of new piles or through load-settlement diagram from Static Load Test data. This paper presents the study of bearing capacity of hollow cylindrical concrete piles with diameter of 800 mm from two projects. The piles at Project I and Project II were hydraulically jacked int...

Synthesis and granulation of a titanosilicate with adsorption capacity for Cs to be used for treating de ILLW of the Ezeiza Radioisotope Production Plant

International Nuclear Information System (INIS)

Curi, Rodrigo; Bianchi, Hugo L; Luca, Vittorio

2012-01-01

The sitinakite structured titanosilicate is widely used for treating ILLW thanks to its capacity for adsorbing both Cs-137 and Sr-90. Its effectiveness lies in its incredibly high selectivity for such radioisotopes, which makes it useful in complex isotope solutions and even in strong acid and alkaline conditions. In Argentina, an off-the-shelve titanosilicate was used in Ezeiza's radioisotope production plant. Because of commercial restrictions, it is no longer available so an inhouse production is being developed. The aim of this project consists of the following: 1. Synthesis of titanosilicate and structural characterization 2. Adsorption kinetics of Cs + 3. Upscale of the synthesis process 4. Assessment of the influence of synthesis temperature and time on product crystallinity 5. Measurement of adsorption capacity of commercial titanosilicates IE910, IE911 and novel RC15H 6. Separative performance column essay and breakthrough plot 7. Chemical and radiolysis resistance of the adsorbent powder binder Polyacrylonitrile (PAN) in contact with the actual waste Throughout this work we have studied the optimum synthesis conditions capable of rendering a sitinakite structured titanosilicate, assessed its Cs + adsorption kinetics, adsorption capacity, crystal phase and purity via DRX, particle size with Laser Light Scattering technique. We have also conducted column breakthrough experiments and tried the chemical and radiolysis resistance of the final product (author)

Review of existing landfill leachate production models

International Nuclear Information System (INIS)

Khan, T.A.

2000-01-01

The protection of water resources is a fundamental consideration in managing landfill operations. Landfill sites should be designed and operated so as to control leachate production and hence minimize the risk of surface and ground water pollution. A further important development is the use of computer models to estimate the production of leachate from landfill sites. It is revealed from the literature that a number of landfill leachate management model lave been development in recent years. These models allow different engineering schemes to be evaluated and are essential tools for design and operation managements of modern landfills. This paper describes a review of such models mainly focused on their theory, practicability, data requirements, suitability to real situation and usefulness. An evaluation of these models identifies. (author)

Interrelationships existing between body weight and egg production ...

African Journals Online (AJOL)

Forty 76 weeks old Olympia Black layers were randomly selected, individually caged and intensively reared for a period of 16 weeks to study the effect of body weight on some egg production traits. The analysis of variance revealed significant effect of body weight on production traits investigated (P<0.01) except egg index ...

A Model To Estimate Carbon Dioxide Injectivity and Storage Capacity for Geological Sequestration in Shale Gas Wells.

Science.gov (United States)

Edwards, Ryan W J; Celia, Michael A; Bandilla, Karl W; Doster, Florian; Kanno, Cynthia M

2015-08-04

Recent studies suggest the possibility of CO2 sequestration in depleted shale gas formations, motivated by large storage capacity estimates in these formations. Questions remain regarding the dynamic response and practicality of injection of large amounts of CO2 into shale gas wells. A two-component (CO2 and CH4) model of gas flow in a shale gas formation including adsorption effects provides the basis to investigate the dynamics of CO2 injection. History-matching of gas production data allows for formation parameter estimation. Application to three shale gas-producing regions shows that CO2 can only be injected at low rates into individual wells and that individual well capacity is relatively small, despite significant capacity variation between shale plays. The estimated total capacity of an average Marcellus Shale well in Pennsylvania is 0.5 million metric tonnes (Mt) of CO2, compared with 0.15 Mt in an average Barnett Shale well. Applying the individual well estimates to the total number of existing and permitted planned wells (as of March, 2015) in each play yields a current estimated capacity of 7200-9600 Mt in the Marcellus Shale in Pennsylvania and 2100-3100 Mt in the Barnett Shale.

Assessing testamentary and decision-making capacity: Approaches and models.

Science.gov (United States)

Purser, Kelly; Rosenfeld, Tuly

2015-09-01

The need for better and more accurate assessments of testamentary and decision-making capacity grows as Australian society ages and incidences of mentally disabling conditions increase. Capacity is a legal determination, but one on which medical opinion is increasingly being sought. The difficulties inherent within capacity assessments are exacerbated by the ad hoc approaches adopted by legal and medical professionals based on individual knowledge and skill, as well as the numerous assessment paradigms that exist. This can negatively affect the quality of assessments, and results in confusion as to the best way to assess capacity. This article begins by assessing the nature of capacity. The most common general assessment models used in Australia are then discussed, as are the practical challenges associated with capacity assessment. The article concludes by suggesting a way forward to satisfactorily assess legal capacity given the significant ramifications of getting it wrong.

Hydrodynamic analysis of potential groundwater extraction capacity increase: case study of 'Nelt' groundwater source at Dobanovci

Directory of Open Access Journals (Sweden)

Bajić Dragoljub I.

2017-01-01

Full Text Available A comprehensive hydrodynamic analysis of the groundwater regime undertaken to assess the potential for expanding the 'Nelt' groundwater source at Dobanovci, or developing a new groundwater source for a future baby food factory, including the quantification of the impact on the production wells of the nearby 'Pepsi' groundwater source, is presented in the paper. The existing Nelt source is comprised of three active production wells that tap a subartesian aquifer formed in sands and gravelly sands; however, the analysis considers only the two nearest wells. A long-term group pumping test was con-ducted of production wells N-1 and N2 (Nelt source and production wells B-1 and B-2 (Pepsi source, while the piezometric head in the vicinity of these wells was monitored at observation well P-1, which is located in the area considered for Nelt source expansion. Data were collected at maximum pumping capacity of all the production wells. A hydrodynamic model of groundwater flow in the extended area of the Nelt source was generated for the purposes of the comprehensive hydrodynamic analysis. Hydrodynamic prognostic calculations addressed two solution alternatives for the capacity increase over a period of ten years. Licensed Visual MODFLOW Pro software, deemed to be at the very top in this field, was used for the calculations.

Does an Exercise Intervention Improving Aerobic Capacity Among Construction Workers Also Improve Musculoskeletal Pain, Work Ability, Productivity, Perceived Physical Exertion, and Sick Leave?

DEFF Research Database (Denmark)

Gram, Bibi; Holtermann, Andreas; Bültmann, Ute

2012-01-01

OBJECTIVE:: To investigate whether an exercise intervention shown to increase aerobic capacity, would also lead to less musculoskeletal pain; improved work ability, productivity, and perceived physical exertion; and less sick leave. METHODS:: Sixty-seven construction workers were randomized...... into an exercise group training 3 × 20 minutes per week and a control group. Questionnaires and text messages were completed before and after the 12-week intervention. RESULTS:: No significant changes were found in musculoskeletal pain, work ability, productivity, perceived physical exertion, and sick leave...... with the intervention. Questionnaires and text messages provided similar results of pain and work ability. CONCLUSIONS:: Although the intervention improved aerobic capacity, it was not successful in improving musculoskeletal pain and other work-related factors. A detectable improvement presumably requires a more...

Simulations of floor cooling system capacity

International Nuclear Information System (INIS)

Odyjas, Andrzej; Górka, Andrzej

2013-01-01

Floor cooling system capacity depends on its physical and operative parameters. Using numerical simulations, it appears that cooling capacity of the system largely depends on the type of cooling loads occurring in the room. In the case of convective cooling loads capacity of the system is small. However, when radiation flux falls directly on the floor the system significantly increases productivity. The article describes the results of numerical simulations which allow to determine system capacity in steady thermal conditions, depending on the type of physical parameters of the system and the type of cooling load occurring in the room. Moreover, the paper sets out the limits of system capacity while maintaining a minimum temperature of the floor surface equal to 20 °C. The results are helpful for designing system capacity in different type of cooling loads and show maximum system capacity in acceptable thermal comfort condition. -- Highlights: ► We have developed numerical model for simulation of floor cooling system. ► We have described floor system capacity depending on its physical parameters. ► We have described floor system capacity depending on type of cooling loads. ► The most important in the obtained cooling capacities is the type of cooling loads. ► The paper sets out the possible maximum cooling floor system capacity

Uranium supply/demand projections to 2030 in the OECD/NEA-IAEA ''Red Book''. Nuclear growth projections, global uranium exploration, uranium resources, uranium production and production capacity

International Nuclear Information System (INIS)

Vance, Robert

2009-01-01

World demand for electricity is expected to continue to grow rapidly over the next several decades to meet the needs of an increasing population and economic growth. The recognition by many governments that nuclear power can produce competitively priced, base load electricity that is essentially free of greenhouse gas emissions, combined with the role that nuclear can play in enhancing security of energy supplies, has increased the prospects for growth in nuclear generating capacity. Since the mid-1960s, with the co-operation of their member countries and states, the OECD Nuclear Energy Agency (NEA) and the International Atomic Energy Agency (IAEA) have jointly prepared periodic updates (currently every 2 years) on world uranium resources, production and demand. These updates have been published by the OECD/NEA in what is commonly known as the ''Red Book''. The 2007 edition replaces the 2005 edition and reflects information current as of 1 st January 2007. Uranium 2007: Resources, Production and Demand presents, in addition to updated resource figures, the results of a recent review of world uranium market fundamentals and provides a statistical profile of the world uranium industry. It contains official data provided by 40 countries (and one Country Report prepared by the IAEA Secretariat) on uranium exploration, resources, production and reactor-related requirements. Projections of nuclear generating capacity and reactor-related uranium requirements to 2030 as well as a discussion of long-term uranium supply and demand issues are also presented. (orig.)

Management of productive reserves in a SME of Santo Domingo de los Tsáchilas

Directory of Open Access Journals (Sweden)

Rodobaldo Martínez Vivar

2016-03-01

Full Text Available The development of a methodology for the organization of work in the SME, which enables the identification of existing productive reserves and thus a consequent improvement of the indica-tors of labor productivity is the goal of the present investigation. To achieve this objective a pro-cess adapted to the conditions of the object of practical study, which from a holistic approach al-lowed the realization of analysis for the proposed organization of work. The main results can be highlighted the following: the existence of a waste of working time 15% primarily determined by wasting time in the day, likewise it allowed identifying the limiting capacity of the production pro-cess of the natural medicine Prostageron, as well as problems associated with noise, vibration, lighting and ventilation were identified, although there are no major problems that could harm the health of workers. Finally he was able to increase labor productivity in 35.42% compared with the analysis developed linked to the detected limited capacity, while in this first analysis for field observation can indicate the possibility of a production increase of 327%

A vectorial capacity product to monitor changing malaria transmission potential in epidemic regions of Africa

Science.gov (United States)

Ceccato, Pietro; Vancutsem, Christelle; Klaver, Robert; Rowland, James; Connor, Stephen J.

2012-01-01

Rainfall and temperature are two of the major factors triggering malaria epidemics in warm semi-arid (desert-fringe) and high altitude (highland-fringe) epidemic risk areas. The ability of the mosquitoes to transmit Plasmodium spp. is dependent upon a series of biological features generally referred to as vectorial capacity. In this study, the vectorial capacity model (VCAP) was expanded to include the influence of rainfall and temperature variables on malaria transmission potential. Data from two remote sensing products were used to monitor rainfall and temperature and were integrated into the VCAP model. The expanded model was tested in Eritrea and Madagascar to check the viability of the approach. The analysis of VCAP in relation to rainfall, temperature and malaria incidence data in these regions shows that the expanded VCAP correctly tracks the risk of malaria both in regions where rainfall is the limiting factor and in regions where temperature is the limiting factor. The VCAP maps are currently offered as an experimental resource for testing within Malaria Early Warning applications in epidemic prone regions of sub-Saharan Africa. User feedback is currently being collected in preparation for further evaluation and refinement of the VCAP model.

HIV communication capacity strengthening: a critical review.

Science.gov (United States)

Lettenmaier, Cheryl; Kraft, Joan Marie; Raisanen, Keris; Serlemitsos, Elizabeth

2014-08-15

HIV communication is most effective and sustainable when it is designed and implemented locally and tailored to the local context. This requires capacity strengthening at national, subnational, and community levels. Through a review of the published and selected "grey" literature, we examine HIV communication capacity strengthening: definitions, measurements, implementation, and effects. We found limited documentation of HIV communication capacity needs or systematic approaches to address them. Most HIV communication capacity strengthening to date has focused on building individual competencies to design and manage social and behavior change communication programs through training courses, often coupled with networking opportunities for participants, post-training mentoring, and technical assistance. A few of these efforts have been evaluated through pre- and post-training tests and qualitative interviews with participants and have shown potential for improvement in individual skills and knowledge. Health communication capacity assessment tools that measure individual and organizational competencies exist, but they have most often been used to identify capacity building needs, not for evaluating capacity strengthening efforts. A new definition of capacity strengthening, grown out of recent efforts to improve effectiveness of international health and development programs, focuses on improving organizational and societal systems that support performance and individual competencies. We propose a holistic model for HIV communication capacity strengthening and call for rigorous documentation and evaluation to determine and scale-up optimal capacity building interventions for strengthening social and behavior change communication for HIV prevention, care, and treatment in developing countries.

On the cost of using capacity flexibility - a dynamic programming approach

NARCIS (Netherlands)

Wijngaard, J; Miltenburg, GJ

1997-01-01

This paper considers the problem of how to evaluate the resource use for sales opportunities in a production situation that is dually constrained: in operator capacity and machine capacity. The operator capacity is flexible, while the machine capacity is not. Therefore, there is a certain machine

The Use of Lean Six Sigma Methodology in Increasing Capacity of a Chemical Production Facility at DSM.

Science.gov (United States)

Meeuwse, Marco

2018-03-30

Lean Six Sigma is an improvement method, combining Lean, which focuses on removing 'waste' from a process, with Six Sigma, which is a data-driven approach, making use of statistical tools. Traditionally it is used to improve the quality of products (reducing defects), or processes (reducing variability). However, it can also be used as a tool to increase the productivity or capacity of a production plant. The Lean Six Sigma methodology is therefore an important pillar of continuous improvement within DSM. In the example shown here a multistep batch process is improved, by analyzing the duration of the relevant process steps, and optimizing the procedures. Process steps were performed in parallel instead of sequential, and some steps were made shorter. The variability was reduced, giving the opportunity to make a tighter planning, and thereby reducing waiting times. Without any investment in new equipment or technical modifications, the productivity of the plant was improved by more than 20%; only by changing procedures and the programming of the process control system.

Obligatory decentralized capacity, the best capacity mechanism in the context of the NOME regime

International Nuclear Information System (INIS)

Finon, D.

2011-01-01

The 'obligatory decentralised capacity' (ODC) proposal put forward by RTE and chosen by the Ministry is compared here with the centralised capacity contract bidding system that was preferred by the major operators. It is shown that the criticisms concerning the first system are invalid. In the specific context of the highly vertically integrated French electricity sector and given the way competition has been set up in the NOME system, obligatory decentralisation produces a result, in terms of supply safety, that is no worse than the one of the centralised mechanism. It is also shown that in the French context, the ODC would serve to limit costs to consumers by preventing rent accrual from existing infrastructure, unlike the alternative proposal. (author)

Moral Enhancement Should Target Self-Interest and Cognitive Capacity.

Science.gov (United States)

Ahlskog, Rafael

2017-01-01

Current suggestions for capacities that should be targeted for moral enhancement has centered on traits like empathy, fairness or aggression. The literature, however, lacks a proper model for understanding the interplay and complexity of moral capacities, which limits the practicability of proposed interventions. In this paper, I integrate some existing knowledge on the nature of human moral behavior and present a formal model of prosocial motivation. The model provides two important results regarding the most friction-free route to moral enhancement. First, we should consider decreasing self-interested motivation rather than increasing prosociality directly. Second, this should be complemented with cognitive enhancement. These suggestions are tested against existing and emerging evidence on cognitive capacity, mindfulness meditation and the effects of psychedelic drugs and are found to have sufficient grounding for further theoretical and empirical exploration. Furthermore, moral effects of the latter two are hypothesized to result from a diminished sense of self with subsequent reductions in self-interest.

Assessing employability capacities and career adaptability in a sample of human resource professionals

Directory of Open Access Journals (Sweden)

Melinde Coetzee

2015-06-01

Full Text Available Orientation: Employers have come to recognise graduates’ employability capacities and their ability to adapt to new work demands as important human capital resources for sustaining a competitive business advantage. Research purpose: The study sought (1 to ascertain whether a significant relationship exists between a set of graduate employability capacities and a set of career adaptability capacities and (2 to identify the variables that contributed the most to this relationship. Motivation for the study: Global competitive markets and technological advances are increasingly driving the demand for graduate knowledge and skills in a wide variety of jobs. Contemporary career theory further emphasises career adaptability across the lifespan as a critical skill for career management agency. Despite the apparent importance attached to employees’ employability and career adaptability, there seems to be a general lack of research investigating the association between these constructs. Research approach, design and method: A cross-sectional, quantitative research design approach was followed. Descriptive statistics, Pearson product-moment correlations and canonical correlation analysis were performed to achieve the objective of the study. The participants (N = 196 were employed in professional positions in the human resource field and were predominantly early career black people and women. Main findings: The results indicated positive multivariate relationships between the variables and showed that lifelong learning capacities and problem solving, decision-making and interactive skills contributed the most to explaining the participants’ career confidence, career curiosity and career control. Practical/managerial implications: The study suggests that developing professional graduates’ employability capacities may strengthen their career adaptability. These capacities were shown to explain graduates’ active engagement in career management

Towards Establishing Capacity for Biological Dosimetry at Ghana Atomic Energy Commission.

Science.gov (United States)

Achel, Daniel Gyingiri; Achoribo, Elom; Agbenyegah, Sandra; Adaboro, Rudolph M; Donkor, Shadrack; Adu-Bobi, Nana A K; Agyekum, Akwasi A; Akuamoa, Felicia; Tagoe, Samuel N; Kyei, Kofi A; Yarney, Joel; Serafin, Antonio; Akudugu, John M

2016-01-01

The aim of this study was not only to obtain basic technical prerequisites for the establishment of capacity of biological dosimetry at the Ghana Atomic Energy Commission (GAEC) but also to stimulate interest in biological dosimetry research in Ghana and Sub-Saharan Africa. Peripheral blood from four healthy donors was exposed to different doses (0-6 Gy) of gamma rays from a radiotherapy machine and lymphocytes were subsequently stimulated, cultured, and processed according to standard protocols for 48-50 h. Processed cells were analyzed for the frequencies of dicentric and centric ring chromosomes. Radiation dose delivered to the experimental model was verified using GafChromic® EBT films in parallel experiments. Basic technical prerequisites for the establishment of capacity of biological dosimetry in the GAEC have been realized and expertise in the dicentric chromosome assay consolidated. We successfully obtained preliminary cytogenetic data for a dose-response relationship of the irradiated blood lymphocytes. The data strongly indicate the existence of significant linear (α) and quadratic (β) components and are consistent with those published for the production of chromosome aberrations in comparable absorbed dose ranges.

Market structure, excess capacity and price movement: implications for the world oil market in the 1990s

International Nuclear Information System (INIS)

Iwayemi, A.

1992-01-01

World Oil Market developments, since the second half of the 1980s, have demonstrated again the conventional wisdom in economics that competitive production and pricing strategies have among producers, when the industry is characterized by significant excess capacity, in exerting strong downward pressure on the price. The magnitude and speed of the price falls depends not only on the size and utilization of the available excess capacity, but also on the perception of the markets as regards the degree of the imbalance between demand and supply. The impact of output competition on oil revenues in the short run depends on the magnitude of the price elasticity of demand. The most vivid illustration of this phenomenon is captured by the experience of 1986, when competition for market share among oil producers, despite the existence of about 20 per cent excess capacity, culminated in a sharp drop in price, with only a marginal improvement in demand. (author)

Designing capacity-building in e-learning expertise: Challenges and strategies

OpenAIRE

Aczel, J. C.; Peake, S. R.; Hardy, P.

2008-01-01

This research study looks at how organizations in developing countries perceive the challenge of building capacity in e-learning expertise. Data was collected on six such organizations, and a range of perceived rationales and constraints were identified. The paper hypothesizes a four-part framework to define the e-learning capacity gaps that these circumstances appear to represent: the 'instructional design capacity gap', the 'production capacity gap', the 'tutorial capacity gap' and the 'com...

2009 Capacity Building For Library and Information Centre

African Journals Online (AJOL)

discussed the features of digitized/virtual library and information centre and the need for capacity building especially in .... electronic library, virtual reality, digital library, community library .... architecture of the existing information system and ...

Measuring Innovative Capacities of the Georgia Regions

Directory of Open Access Journals (Sweden)

Joseph Gogodze

2013-10-01

Full Text Available European Union (EU experience reveal that the composite indicators are probably the most useful instruments for measuring the innovative capacities at the regional (sub-national level. However, some gap exists in the current literature with respect to the elaboration of composite indicators for regional innovation systems (RISs of developing countries. This article introduces the composite indicators GRIS and GCLS for measuring the regional innovative capacities (for GNUTS1 and GNUTS2 territorial classification levels, respectively. Georgia is a useful case-subject because its smallscale developing economy presents special challenges for elaborating the composite indicators for RISs. This article also includes a brief analysis using these composite indicators and indicates the significant heterogeneity among the innovative capacities of the Georgian regions.

Opportunities for Decarbonizing Existing U.S. Coal-Fired Power Plants via CO2 Capture, Utilization and Storage.

Science.gov (United States)

Zhai, Haibo; Ou, Yang; Rubin, Edward S

2015-07-07

This study employs a power plant modeling tool to explore the feasibility of reducing unit-level emission rates of CO2 by 30% by retrofitting carbon capture, utilization, and storage (CCUS) to existing U.S. coal-fired electric generating units (EGUs). Our goal is to identify feasible EGUs and their key attributes. The results indicate that for about 60 gigawatts of the existing coal-fired capacity, the implementation of partial CO2 capture appears feasible, though its cost is highly dependent on the unit characteristics and fuel prices. Auxiliary gas-fired boilers can be employed to power a carbon capture process without significant increases in the cost of electricity generation. A complementary CO2 emission trading program can provide additional economic incentives for the deployment of CCS with 90% CO2 capture. Selling and utilizing the captured CO2 product for enhanced oil recovery can further accelerate CCUS deployment and also help reinforce a CO2 emission trading market. These efforts would allow existing coal-fired EGUs to continue to provide a significant share of the U.S. electricity demand.

MATHEMATICAL FRAMEWORK OF THE WELL PRODUCTIVITY INDEX FOR FAST FORCHHEIMER (NON-DARCY) FLOWS IN POROUS MEDIA

KAUST Repository

AULISA, EUGENIO

2009-08-01

Motivated by the reservoir engineering concept of the well Productivity Index, we introduced and analyzed a functional, denoted as "diffusive capacity", for the solution of the initial-boundary value problem (IBVP) for a linear parabolic equation.21 This IBVP described laminar (linear) Darcy flow in porous media; the considered boundary conditions corresponded to different regimes of the well production. The diffusive capacities were then computed as steady state invariants of the solutions to the corresponding time-dependent boundary value problem. Here similar features for fast or turbulent nonlinear flows subjected to the Forchheimer equations are analyzed. It is shown that under some hydrodynamic and thermodynamic constraints, there exists a so-called pseudo steady state regime for the Forchheimer flows in porous media. In other words, under some assumptions there exists a steady state invariant over a certain class of solutions to the transient IBVP modeling the Forchheimer flow for slightly compressible fluid. This invariant is the diffusive capacity, which serves as the mathematical representation of the so-called well Productivity Index. The obtained results enable computation of the well Productivity Index by resolving a single steady state boundary value problem for a second-order quasilinear elliptic equation. Analytical and numerical studies highlight some new relations for the well Productivity Index in linear and nonlinear cases. The obtained analytical formulas can be potentially used for the numerical well block model as an analog of Piecemann. © 2009 World Scientific Publishing Company.

For a better understanding of adaptive capacity to climate change: a research framework

International Nuclear Information System (INIS)

Magnan, Alexandre

2010-05-01

It is generally accepted that there exists a systematic link between a low level of adaptive capacity and a low level of development, which thus implies that the poor inevitably have low adaptive capacities. We argue here that this viewpoint is biased because adaptation to climate change is not solely determined by economic and technological capacities. Many other characteristics of a community can play a major role in its ability to react to and anticipate climate changes (e.g. the territorial identity or the social relationships). From our point of view, this limited view of adaptive capacity is related to a relative immaturity of the science of adaptation, a discipline that analyses the processes and determinants of adaptive capacity. This can be explained by the fact that there are currently few existing frameworks for studying adaptive capacity. This paper consists in a proposal for a research framework which is based upon four main fields of investigation: (i) the influential factors of adaptive capacity and their interactions, (ii) the relevant spatial and temporal scales of adaptive capacity, (iii) the links between adaptive capacity, vulnerability and the level of development and (iv) the theoretical links between adaptation and sustainability. These four fields of research should bring new knowledge on adaptive capacity and feed a more general reflection on the adaptation pathways for dealing with climate change. (author)

Opportunistic Market-Driven Regional Shifts of Cropping Practices Reduce Food Production Capacity of China

Science.gov (United States)

Yuan, Wenping; Liu, Shuguang; Liu, Wei; Zhao, Shuqing; Dong, Wenjie; Tao, Fulu; Chen, Min; Lin, Hui

2018-04-01

China is facing the challenge of feeding a growing population with the declining cropland and increasing shortage of water resources under the changing climate. This study identified that the opportunistic profit-driven shifts of planting areas and crop species composition have strongly reduced the food production capacity of China. First, the regional cultivation patterns of major crops in China have substantially shifted during the past five decades. Southeast and South China, the regions with abundant water resources and fewer natural disasters, have lost large planting areas of cropland in order to pursue industry and commerce. Meanwhile, Northeast and Northwest China, the regions with low water resources and frequent natural disasters, have witnessed increases in planting areas. These macroshifts have reduced the national food production by 1.02% per year. The lost grain production would have been enough to feed 13 million people. Second, the spatial shifts have been accompanied by major changes in crop species composition, with substantial increases in planting area and production of maize, due to its low water consumption and high economic returns. Consequently, the stockpile of maize in China has accounted for more than half of global stockpile, and the stock to use ratio of maize in China has exceeded the reliable level. Market-driven regional shifts of cropping practices have resulted in larger irrigation requirements and aggravated environmental stresses. Our results highlighted the need for Chinese food policies to consider the spatial shifts in cultivation, and the planting crop compositions limited by regional water resources and climate change.

Simulation and Flexibility Analysis of Milk Production Process

DEFF Research Database (Denmark)

Cheng, Hongyuan; Friis, Alan

. Such flexible dairy production line can adjust its production pace in manufacturing different products without replacing existing equipment in the production line. In this work, the dairy process simulator is applied to study the flexibility of milk production line. In the same production line, various......In this work, process simulation method is used to simulate pasteurised market milk production line. A commercial process simulation tool - Pro/II from Simulation Science Inc. is used in the simulation work. In the simulation, a new model is used to calculate the thermal property of milk....... In this work, a simulator is obtained for the milk production line. Using the simulator, different milk processing situation can be quantitatively simulated investigated, such as different products production, capacity changes, fat content changes in raw milk, energy cost at different operation conditions etc...

Potential Water Retention Capacity as a Factor in Silage Effluent Control: Experiments with High Moisture By-product Feedstuffs

Science.gov (United States)

Razak, Okine Abdul; Masaaki, Hanada; Yimamu, Aibibula; Meiji, Okamoto

2012-01-01

The role of moisture absorptive capacity of pre-silage material and its relationship with silage effluent in high moisture by-product feedstuffs (HMBF) is assessed. The term water retention capacity which is sometimes used in explaining the rate of effluent control in ensilage may be inadequate, since it accounts exclusively for the capacity of an absorbent incorporated into a pre-silage material prior to ensiling, without consideration to how much the pre-silage material can release. A new terminology, ‘potential water retention capacity’ (PWRC), which attempts to address this shortcoming, is proposed. Data were pooled from a series of experiments conducted separately over a period of five years using laboratory silos with four categories of agro by-products (n = 27) with differing moisture contents (highest 96.9%, lowest 78.1% in fresh matter, respectively), and their silages (n = 81). These were from a vegetable source (Daikon, Raphanus sativus), a root tuber source (potato pulp), a fruit source (apple pomace) and a cereal source (brewer’s grain), respectively. The pre-silage materials were adjusted with dry in-silo absorbents consisting wheat straw, wheat or rice bran, beet pulp and bean stalks. The pooled mean for the moisture contents of all pre-silage materials was 78.3% (±10.3). Silage effluent decreased (p<0.01), with increase in PWRC of pre-silage material. The theoretical moisture content and PWRC of pre-silage material necessary to stem effluent flow completely in HMBF silage was 69.1% and 82.9 g/100 g in fresh matter, respectively. The high correlation (r = 0.76) between PWRC of ensiled material and silage effluent indicated that the latter is an important factor in silage-effluent relationship. PMID:25049587

Potential Water Retention Capacity as a Factor in Silage Effluent Control: Experiments with High Moisture By-product Feedstuffs

Directory of Open Access Journals (Sweden)

Okine Abdul Razak

2012-04-01

Full Text Available The role of moisture absorptive capacity of pre-silage material and its relationship with silage effluent in high moisture by-product feedstuffs (HMBF is assessed. The term water retention capacity which is sometimes used in explaining the rate of effluent control in ensilage may be inadequate, since it accounts exclusively for the capacity of an absorbent incorporated into a pre-silage material prior to ensiling, without consideration to how much the pre-silage material can release. A new terminology, ‘potential water retention capacity’ (PWRC, which attempts to address this shortcoming, is proposed. Data were pooled from a series of experiments conducted separately over a period of five years using laboratory silos with four categories of agro by-products (n = 27 with differing moisture contents (highest 96.9%, lowest 78.1% in fresh matter, respectively, and their silages (n = 81. These were from a vegetable source (Daikon, Raphanus sativus, a root tuber source (potato pulp, a fruit source (apple pomace and a cereal source (brewer’s grain, respectively. The pre-silage materials were adjusted with dry in-silo absorbents consisting wheat straw, wheat or rice bran, beet pulp and bean stalks. The pooled mean for the moisture contents of all pre-silage materials was 78.3% (±10.3. Silage effluent decreased (p<0.01, with increase in PWRC of pre-silage material. The theoretical moisture content and PWRC of pre-silage material necessary to stem effluent flow completely in HMBF silage was 69.1% and 82.9 g/100 g in fresh matter, respectively. The high correlation (r = 0.76 between PWRC of ensiled material and silage effluent indicated that the latter is an important factor in silage-effluent relationship.

Seismic evaluation of existing nuclear facilities. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

Programmes for re-evaluation and upgrading of safety of existing nuclear facilities are presently under way in a number of countries around the world. An important component of these programmes is the re-evaluation of the seismic safety through definition of new seismic parameters at the site and evaluation of seismic capacity of structures, equipment and distribution systems following updated information and criteria. The Seminar is intended to provide a forum for the exchange of information and discussion of the state-of-the-art on seismic safety of nuclear facilities in operation or under construction. Both analytical and experimental techniques for the evaluation of seismic capacity of structures, equipment and distribution systems are discussed. Full scale and field tests of structures and components using shaking tables, mechanical exciters, explosive and shock tests, and ambient vibrations are included in the seminar programme with emphasis on recent case histories. Presentations at the Seminar also include analytical techniques for the determination of dynamic properties of soil-structure systems from experiments as well as calibration of numerical models. Methods and criteria for seismic margin assessment based on experience data obtained from the behaviour of structures and components in real earthquakes are discussed. Guidelines for defining technical requirements for capacity re-evaluation (i.e. acceptable behaviour limits and design and implementation of structure and components upgrades are also presented and discussed. The following topics were covered during 7 sessions: earthquake experience and seismic re-evaluation; country experience in seismic re-evaluation programme; generic WWER studies; analytical methods for seismic capacity re-evaluation; experimental methods for seismic capacity re-evaluation; case studies.

Seismic evaluation of existing nuclear facilities. Proceedings

International Nuclear Information System (INIS)

1995-01-01

Programmes for re-evaluation and upgrading of safety of existing nuclear facilities are presently under way in a number of countries around the world. An important component of these programmes is the re-evaluation of the seismic safety through definition of new seismic parameters at the site and evaluation of seismic capacity of structures, equipment and distribution systems following updated information and criteria. The Seminar is intended to provide a forum for the exchange of information and discussion of the state-of-the-art on seismic safety of nuclear facilities in operation or under construction. Both analytical and experimental techniques for the evaluation of seismic capacity of structures, equipment and distribution systems are discussed. Full scale and field tests of structures and components using shaking tables, mechanical exciters, explosive and shock tests, and ambient vibrations are included in the seminar programme with emphasis on recent case histories. Presentations at the Seminar also include analytical techniques for the determination of dynamic properties of soil-structure systems from experiments as well as calibration of numerical models. Methods and criteria for seismic margin assessment based on experience data obtained from the behaviour of structures and components in real earthquakes are discussed. Guidelines for defining technical requirements for capacity re-evaluation (i.e. acceptable behaviour limits and design and implementation of structure and components upgrades are also presented and discussed. The following topics were covered during 7 sessions: earthquake experience and seismic re-evaluation; country experience in seismic re-evaluation programme; generic WWER studies; analytical methods for seismic capacity re-evaluation; experimental methods for seismic capacity re-evaluation; case studies

Faulty judgment, expert opinion, and decision-making capacity.

Science.gov (United States)

Silberfeld, M; Checkland, D

1999-08-01

An assessment of decision-making capacity is the accepted procedure for determining when a person is not competent. An inferential gap exists between the criteria for capacity specific abilities and the legal requirements to understand relevant information and appreciate the consequences of a decision. This gap extends to causal influences on a person's capacity to decide. Using a published case of depression, we illustrate that assessors' uses of diagnostic information is frequently not up to the task of bridging this inferential gap in a justifiable way. We then describe cases of faulty judgement which challenge the understanding of diagnostic causal influences. These cases help to clarify the nature of the expertise required for capacity assessments. In practice, the requirements of decision-making capacity are often abandoned to other considerations due to a lack of requisite expertise. The legal policy supporting decision-making capacity as a means to protective intervention is justified only if the requisite expertise is developed. We propose the requisite expertise to be developed in the long term as a distinct multidisciplinary endeavour.

Capacity of Heterogeneous Mobile Wireless Networks with D-Delay Transmission Strategy.

Science.gov (United States)

Wu, Feng; Zhu, Jiang; Xi, Zhipeng; Gao, Kai

2016-03-25

This paper investigates the capacity problem of heterogeneous wireless networks in mobility scenarios. A heterogeneous network model which consists of n normal nodes and m helping nodes is proposed. Moreover, we propose a D-delay transmission strategy to ensure that every packet can be delivered to its destination nodes with limited delay. Different from most existing network schemes, our network model has a novel two-tier architecture. The existence of helping nodes greatly improves the network capacity. Four types of mobile networks are studied in this paper: i.i.d. fast mobility model and slow mobility model in two-dimensional space, i.i.d. fast mobility model and slow mobility model in three-dimensional space. Using the virtual channel model, we present an intuitive analysis of the capacity of two-dimensional mobile networks and three-dimensional mobile networks, respectively. Given a delay constraint D, we derive the asymptotic expressions for the capacity of the four types of mobile networks. Furthermore, the impact of D and m to the capacity of the whole network is analyzed. Our findings provide great guidance for the future design of the next generation of networks.

Influence of thermal treatment on color, enzyme activities, and antioxidant capacity of innovative pastelike parsley products.

Science.gov (United States)

Kaiser, Andrea; Brinkmann, Maike; Carle, Reinhold; Kammerer, Dietmar R

2012-03-28

Conventional spice powders are often characterized by low sensory quality and high microbial loads. Furthermore, genuine enzymes are only inhibited but not entirely inactivated upon drying, so that they may regain their activity upon rehydration of dried foods. To overcome these problems, initial heating was applied in the present study as the first process step for the production of innovative pastelike parsley products. For this purpose, fresh parsley was blanched (80, 90, and 100 °C for 1-10 min) and subsequently comminuted to form a paste. Alternatively, mincing was carried out prior to heat treatment. Regardless of temperature, the color of the latter product did not show any change after heating for 1 min. With progressing exposure time the green color turned to olive hues due to marked pheophytin formation. Inactivation of genuine peroxidase (POD) and polyphenol oxidase (PPO) was achieved at all temperature-time regimes applied. In contrast, the parsley products obtained after immediate water-blanching were characterized by brighter green colors and enhanced pigment retention. With the exception of the variants water-blanched at 80 °C, POD and PPO were completely inactivated at any of the thermal treatments. Furthermore, in water-blanched samples, antioxidant capacities as determined by the TEAC and FRAP assays were even enhanced compared to unheated parsley, whereas a decrease of phenolic contents could not be prevented. Consequently, the innovative process presented in this study allows the production of novel herb and spice products characterized by improved sensory quality as compared to conventional spice products.

The creation in the French power system of a capacity mechanism and of a capacity market

International Nuclear Information System (INIS)

Meda, Maurice

2014-01-01

The key objective of the French capacity remuneration mechanism is to ensure long term security of supply and to promote peak load containment. The mechanism was set up by the NOME law of December 7, 2010 ('new organisation of the electricity market'), which has changed the organisation of the electricity market and explicitly requires a capacity obligation from suppliers, and by a decree published on December 14, 2012 'concerning the contribution of suppliers to the security of electricity supply and establishing a capacity obligation mechanism in the electricity sector'; further regulation will set up the rules for the capacity mechanism, probably during 2014. The mechanism is decentralized: every supplier has to contribute to supply security and to prove its ability to provide its clients with the capacity they need; all capacity owners in metropolitan France must have their production tools certified. Certificates can be sold and suppliers can buy them to adjust their positions. The transport System operator (TSO) calculates suppliers' obligation, checks if capacity owners fulfil their availability commitment and if suppliers have bought enough certificates. The contribution of interconnections to France's SOS is taken into account implicitly. The decree provides an additional safeguard mechanism, which is centralized: in case a critical situation is observed regarding the electricity supply and demand, the government can organize a call for tender to secure the necessary capacities; the conditions to trigger the call for tender are very restrictive, to ensure the capacity market remains the main investment provider. (author)

Optimal localisation of next generation Biofuel production in Sweden

Energy Technology Data Exchange (ETDEWEB)

Wetterlund, Elisabeth [Linkoeping Univ., Linkoeping (Sweden); Pettersson, Karin [Chalmers Univ. of Technology, Goeteborg (Sweden); Mossberg, Johanna [SP Technical Research Inst. of Sweden, Boraas (Sweden)] [and others

2013-09-01

With a high availability of lignocellulosic biomass and various types of cellulosic by-products, as well as a large number of industries, Sweden is a country of great interest for future large scale production of sustainable, next generation biofuels. This is most likely also a necessity as Sweden has the ambition to be independent of fossil fuels in the transport sector by the year 2030 and completely fossil free by 2050. In order to reach competitive biofuel production costs, plants with large production capacities are likely to be required. Feedstock intake capacities in the range of about 1-2 million tonnes per year, corresponding to a biomass feed of 300-600 MW, can be expected, which may lead to major logistical challenges. To enable expansion of biofuel production in such large plants, as well as provide for associated distribution requirements, it is clear that substantial infrastructure planning will be needed. The geographical location of the production plant facilities is therefore of crucial importance and must be strategic to minimise the transports of raw material as well as of final product. Competition for the available feedstock, from for example forest industries and CHP plants (combined heat and power) further complicates the localisation problem. Since the potential for an increased biomass utilisation is limited, high overall resource efficiency is of great importance. Integration of biofuel production processes in existing industries or in district heating systems may be beneficial from several aspects, such as opportunities for efficient heat integration, feedstock and equipment integration, as well as access to existing experience and know-how. This report describes the development of Be Where Sweden, a geographically explicit optimisation model for localisation of next generation biofuel production plants in Sweden. The main objective of developing such a model is to be able to assess production plant locations that are robust to varying

Financial accounting as a method of household finance capacity valuation

OpenAIRE

A. B. Untanov

2017-01-01

The article presents existing household finance capacity investigations. Comparison conducting allowed to determinate collisions and flaws of previous works. That substantiates to find a new approach in household finance capacity valuation necessity. The article contains theoretical research of household finance fundamental categories. In particular, it notes significant difference between domestic and foreign experience of household finance determination. Although emphasizing key similaritie...

Modelling a New Product Model on the Basis of an Existing STEP Application Protocol

Directory of Open Access Journals (Sweden)

B.-R. Hoehn

2005-01-01

Full Text Available During the last years a great range of computer aided tools has been generated to support the development process of various products. The goal of a continuous data flow, needed for high efficiency, requires powerful standards for the data exchange. At the FZG (Gear Research Centre of the Technical University of Munich there was a need for a common gear data format for data exchange between gear calculation programs. The STEP standard ISO 10303 was developed for this type of purpose, but a suitable definition of gear data was still missing, even in the Application Protocol AP 214, developed for the design process in the automotive industry. The creation of a new STEP Application Protocol or the extension of existing protocol would be a very time consumpting normative process. So a new method was introduced by FZG. Some very general definitions of an Application Protocol (here AP 214 were used to determine rules for an exact specification of the required kind of data. In this case a product model for gear units was defined based on elements of the AP 214. Therefore no change of the Application Protocol is necessary. Meanwhile the product model for gear units has been published as a VDMA paper and successfully introduced for data exchange within the German gear industry associated with FVA (German Research Organisation for Gears and Transmissions. This method can also be adopted for other applications not yet sufficiently defined by STEP. 

Plant-wide Control for Better De-oiling of Produced Water in Offshore Oil & Gas Production

DEFF Research Database (Denmark)

Yang, Zhenyu; Stigkær, Jens Peter; Løhndorf, Bo

2013-01-01

This paper discusses the application of plant-wide control philosophy to enhance the performance and capacity of the Produced Water Treatment (PWT) in offshore oil & gas production processes. Different from most existing facility- or material-based PWT innovation methods, the objective of this work...

Economic performance of water storage capacity expansion for food security

Science.gov (United States)

Gohar, Abdelaziz A.; Ward, Frank A.; Amer, Saud A.

2013-03-01

SummaryContinued climate variability, population growth, and rising food prices present ongoing challenges for achieving food and water security in poor countries that lack adequate water infrastructure. Undeveloped storage infrastructure presents a special challenge in northern Afghanistan, where food security is undermined by highly variable water supplies, inefficient water allocation rules, and a damaged irrigation system due three decades of war and conflict. Little peer-reviewed research to date has analyzed the economic benefits of water storage capacity expansions as a mechanism to sustain food security over long periods of variable climate and growing food demands needed to feed growing populations. This paper develops and applies an integrated water resources management framework that analyzes impacts of storage capacity expansions for sustaining farm income and food security in the face of highly fluctuating water supplies. Findings illustrate that in Afghanistan's Balkh Basin, total farm income and food security from crop irrigation increase, but at a declining rate as water storage capacity increases from zero to an amount equal to six times the basin's long term water supply. Total farm income increases by 21%, 41%, and 42% for small, medium, and large reservoir capacity, respectively, compared to the existing irrigation system unassisted by reservoir storage capacity. Results provide a framework to target water infrastructure investments that improve food security for river basins in the world's dry regions with low existing storage capacity that face ongoing climate variability and increased demands for food security for growing populations.

Institutional capacity and climate actions. Summary paper

International Nuclear Information System (INIS)

Willems, S.

2004-01-01

The aim of this paper is to explore the role of institutional capacity in selecting the most appropriate climate actions. More specifically, it investigates why, for some countries, institutional capacity may need to be considered as an important criterion for selecting future climate actions, alongside environmental, economic and/or political considerations. This paper is a synthesis of results of an OECD/IEA project undertaken in 2003 for the Annex I Expert Group, which led to several publications, namely a framework paper on Institutional Capacity and Climate Actions, three national cases studies, respectively on Mexico, India and Bulgaria, as well as a paper assessing the status of national inventory preparation in Annex I and non-Annex I Parties (OECD/IEA, 2003). The paper argues that the very nature of a country's institutional development suggests a progressive approach to climate actions, which takes into account the specificity of a country's existing institutional setting. More specifically, substantial changes in a country's existing institutions are likely to be required when particular levels or types of institutional capacities need to be developed, for example when these changes affect public governance as a whole. Finally, particular forms of actions may require significant changes in a country's institutional setting. For example, legally-binding quantified national targets tend to require significant institutional development in all functions of climate policy. With other approaches, such as those based on non-binding targets, sectoral targets or policies and measures, institutional development may be more progressive and targeted. Thus, when considering particular forms of climate actions, countries might benefit from investigating what kind of institutions are likely to be needed and whether they will be able to develop sufficient capacity in time to implement these actions. Overall, this analysis suggests a step-by-step, dynamic model for

Aviation System Capacity Program Terminal Area Productivity Project: Ground and Airborne Technologies

Science.gov (United States)

Giulianetti, Demo J.

2001-01-01

Ground and airborne technologies were developed in the Terminal Area Productivity (TAP) project for increasing throughput at major airports by safely maintaining good-weather operating capacity during bad weather. Methods were demonstrated for accurately predicting vortices to prevent wake-turbulence encounters and to reduce in-trail separation requirements for aircraft approaching the same runway for landing. Technology was demonstrated that safely enabled independent simultaneous approaches in poor weather conditions to parallel runways spaced less than 3,400 ft apart. Guidance, control, and situation-awareness systems were developed to reduce congestion in airport surface operations resulting from the increased throughput, particularly during night and instrument meteorological conditions (IMC). These systems decreased runway occupancy time by safely and smoothly decelerating the aircraft, increasing taxi speed, and safely steering the aircraft off the runway. Simulations were performed in which optimal trajectories were determined by air traffic control (ATC) and communicated to flight crews by means of Center TRACON Automation System/Flight Management System (CTASFMS) automation to reduce flight delays, increase throughput, and ensure flight safety.

Hanford Waste Vitrification Plant capacity increase options

International Nuclear Information System (INIS)

Larson, D.E.

1996-04-01

Studies are being conducted by the Hanford Waste Vitrification Plant (HWVP) Project on ways to increase the waste processing capacity within the current Vitrification Building structural design. The Phase 1 study on remote systems concepts identification and extent of capacity increase was completed. The study concluded that the HWVP capacity could be increased to four times the current capacity with minor design adjustments to the fixed facility design, and the required design changes would not impact the current footprint of the vitrification building. A further increase in production capacity may be achievable but would require some technology development, verification testing, and a more systematic and extensive engineering evaluation. The primary changes included a single advance melter with a higher capacity, new evaporative feed tank, offgas quench collection tank, ejector venturi scrubbers, and additional inner canister closure station,a smear test station, a new close- coupled analytical facility, waste hold capacity of 400,000 gallon, the ability to concentrate out-of-plant HWVP feed to 90 g/L waste oxide concentration, and limited changes to the current base slab construction package

Light Quality Dependent Changes in Morphology, Antioxidant Capacity, and Volatile Production in Sweet Basil (Ocimum basilicum).

Science.gov (United States)

Carvalho, Sofia D; Schwieterman, Michael L; Abrahan, Carolina E; Colquhoun, Thomas A; Folta, Kevin M

2016-01-01

Narrow-bandwidth light treatments may be used to manipulate plant growth, development and metabolism. In this report LED-based light treatments were used to affect yield and metabolic content of sweet basil (Ocimum basilicum L. cv "Ceasar") grown in controlled environments. This culinary herb produces an aroma highly appreciated by consumers, primarily composed of terpenes/terpenoids, phenylpropanoids, and fatty-acid- derived volatile molecules. Basil plants were grown under narrow-bandwidth light conditions, and leaf area, height, mass, antioxidant capacity and volatile emissions were measured at various time points. The results indicate reproducible significant differences in specific volatiles, and in biochemical classes of volatiles, compared to greenhouse grown plants. For example, basil plants grown under blue/red/yellow or blue/red/green wavelengths emit higher levels of a subset of monoterpenoid volatiles, while a blue/red/far-red treatment leads to higher levels of most sesquiterpenoid volatile molecules. Specific light treatments increase volatile content, mass, and antioxidant capacity. The results show that narrow-bandwidth illumination can induce discrete suites of volatile classes that affect sensory quality in commercial herbs, and may be a useful tool in improving commercial production.

Interorganizational Diffusion and Transformation of Knowledge in the Process of Product Innovation

DEFF Research Database (Denmark)

Vinding, Anker Lund

In the knowledge-based economy interorganizational interaction is regarded as crucial in the process of product innovation. Contributions from Lundvall, Von Hippel and the resource based view of the firm all argue that absorptive capacity is of importance for an efficient use of external knowledge...... knowledge the firm also needs to invest in the establishment of channels and codes of communication to external parties. By emphasizing the relative aspect of absorptive capacity as investment in social capital we argue that absolute absorptive capacity and social capital are complementary. This calls...... with respect to the complementarity between the absolute and the relative aspects of absorptive capacity the dissertation concludes that complementarity exists. The implications for firms and policy makers are that in order to give effective access to absorption investment in both the internal knowledge base...

Robustness indicators and capacity models for railway networks

DEFF Research Database (Denmark)

Jensen, Lars Wittrup

In a world continuous striving for higher mobility and the use of more sustainable modes of transport, there is a constant pressure on utilising railway capacity better and, at the same time, obtaining a high robustness against delays. During the planning of railway operations and infrastructure ....... This has motivated the research conducted and described in this thesis, where the objective has been to develop and improve existing methods to achieve timetable and infrastructure plans with robust capacity utilisation aimed at the strategic and early tactical planning phases....

Isotope production potential at Sandia National Laboratories: Product, waste, packaging, and transportation

International Nuclear Information System (INIS)

Trennel, A.J.

1995-01-01

The U.S. Congress directed the U.S. Department of Energy to establish a domestic source of molybdenum-99, an essential isotope used in nuclear medicine and radiopharmacology. An Environmental Impact Statement for production of 99 Mo at one of four candidate sites is being prepared. As one of the candidate sites, Sandia National Laboratories is developing the Isotope Production Project. Using federally approved processes and procedures now owned by the U.S. Department of Energy, and existing facilities that would be modified to meet the production requirements, the Sandia National Laboratories' Isotope Project would manufacture up to 30 percent of the U.S. market, with the capacity to meet 100 percent of the domestic need if necessary. This paper provides a brief overview of the facility, equipment, and processes required to produce isotopes. Packaging and transportation issues affecting both product and waste are addressed, and the storage and disposal of the four low-level radioactive waste types generated by the production program are considered. Recommendations for future development are provided

Urban development control based on transportation carrying capacity

Science.gov (United States)

Miharja, M.; Sjafruddin, A. H.

2017-06-01

Severe transportation problems in Indonesian urban areas are stimulated by one fundamental factor, namely lack of awareness on transportation carrying capacity in these areas development control. Urban land use development towards more physical coverage is typically not related with the capability of transportation system to accommodate additional trips volume. Lack of clear connection between development permit with its implication on the transportation side has led to a phenomenon of exceeding transport demand over supply capacity. This paper discusses the concept of urban land use development control which will be related with transport carrying capacity. The discussion would cover both supply and demand sides of transportation. From supply side, the analysis regarding the capacity of transport system would take both existing as well as potential road network capacity could be developed. From demand side, the analysis would be through the control of a maximum floor area and public transport provision. Allowed maximum floor area for development would be at the level of generating traffic at reasonable volume. Ultimately, the objective of this paper is to introduce model to incorporate transport carrying capacity in Indonesian urban land use development control.

Enhancing capacity among faith-based organizations to implement evidence-based cancer control programs: a community-engaged approach.

Science.gov (United States)

Leyva, Bryan; Allen, Jennifer D; Ospino, Hosffman; Tom, Laura S; Negrón, Rosalyn; Buesa, Richard; Torres, Maria Idalí

2017-09-01

Evidence-based interventions (EBIs) to promote cancer control among Latinos have proliferated in recent years, though adoption and implementation of these interventions by faith-based organizations (FBOs) is limited. Capacity building may be one strategy to promote implementation. In this qualitative study, 18 community key informants were interviewed to (a) understand existing capacity for health programming among Catholic parishes, (b) characterize parishes' resource gaps and capacity-building needs implementing cancer control EBIs, and (c) elucidate strategies for delivering capacity-building assistance to parishes to facilitate implementation of EBIs. Semi-structured qualitative interviews were conducted. Key informants concurred about the capacity of Catholic parishes to deliver health programs, and described attributes of parishes that make them strong partners in health promotion initiatives, including a mission to address physical and mental health, outreach to marginalized groups, altruism among members, and existing engagement in health programming. However, resource gaps and capacity building needs were also identified. Specific recommendations participants made about how existing resources might be leveraged to address challenges include to: establish parish wellness committees; provide "hands-on" learning opportunities for parishioners to gain program planning skills; offer continuous, tailored, on-site technical assistance; facilitate relationships between parishes and community resources; and provide financial support for parishes. Leveraging parishes' existing resources and addressing their implementation needs may improve adoption of cancer control EBIs.

Shortcomings of existing systems for registration and legal protection of software products and possible ways to overcome them

Science.gov (United States)

Liapidevskiy, A. V.; Petrov, A. S.; Zhmud, V. A.; Sherubneva, I. G.

2018-05-01

The paper reveals the shortcomings of the existing system of registration and legal protection of software products. The system has too many disadvantages and shortcomings. Explanatory examples are given. Possible ways of overcoming these shortcomings are discussed. The paper also gives possible prospects for the use of new digital technologies. Also in the paper, the information is provided about the modern software components for protecting intellectual property rights of State corporations

Influence of Laccase and Tyrosinase on the Antioxidant Capacity of Selected Phenolic Compounds on Human Cell Lines

Directory of Open Access Journals (Sweden)

Matthias Riebel

2015-09-01

Full Text Available Polyphenolic compounds affect the color, odor and taste of numerous food products of plant origin. In addition to the visual and gustatory properties, they serve as radical scavengers and have antioxidant effects. Polyphenols, especially resveratrol in red wine, have gained increasing scientific and public interest due to their presumptive beneficial impact on human health. Enzymatic oxidation of phenolic compounds takes place under the influence of polyphenol oxidases (PPO, including tyrosinase and laccase. Several studies have demonstrated the radical scavenger effect of plants, food products and individual polyphenols in vitro, but, apart from resveratrol, such impact has not been proved in physiological test systems. Furthermore, only a few data exist on the antioxidant capacities of the enzymatic oxidation products of phenolic compounds generated by PPO. We report here first results about the antioxidant effects of phenolic substances, before and after oxidation by fungal model tyrosinase and laccase. In general, the common chemical 2,2-diphenyl-1-picrylhydrazyl assay and the biological tests using two different types of cell cultures (monocytes and endothelial cells delivered similar results. The phenols tested showed significant differences with respect to their antioxidant activity in all test systems. Their antioxidant capacities after enzymatic conversion decreased or increased depending on the individual PPO used.

Determinação da capacidade real necessária de um processo produtivo utilizando cadeia de Markov Determination of necessary real capacity in productive process using Markov chain

Directory of Open Access Journals (Sweden)

Francielly Hedler Staudt

2011-01-01

Full Text Available Todas as empresas em desenvolvimento passam pelo momento de decidir se há ou não necessidade de realizar novos investimentos para suprir uma demanda crescente. Para tomar tal decisão é imprescindível conhecer se o processo atual tem capacidade de produzir a nova demanda. Porém, são raras as empresas que têm a percepção de que os refugos e retrabalhos também consomem recursos da produção e, portanto, devem ser considerados no cálculo da capacidade produtiva. A proposta deste trabalho consiste em incluir esses fatores na análise de capacidade da fábrica, utilizando uma matriz de transição estocástica da cadeia absorvente de Markov como ferramenta para obtenção do fator de capacidade. Este fator, aliado ao índice de eficiência e a demanda desejada ao fim do processo, resulta na capacidade real necessária. Um estudo de caso exemplifica a metodologia, apresentando resultados que permitem o cálculo do índice de ocupação real de cada centro produtivo. O cálculo desse índice demonstrou que alguns centros de trabalho necessitam de análises sobre investimentos em capacitação, pois ultrapassaram 90% de ocupação.All developing companies must decide once in a while whether it is required to perform new investments to handle a growing demand. In order to make this decision, it is essential to know whether the current productive capacity is able to supply the new demand. However, just few companies realize that refuse and rework use production resources, which must be taken into account in the productive capacity calculation. The aim of this work was to include these factors in factory capacity analysis, using Markov chain stochastic transition matrix as a tool to obtain the capacity factor. This factor - used together with the efficiency index and the required demand in the end of the process - results in the necessary real capacity. A case study exemplifies the proposed methodology, presenting results that allow for the

Demand response and energy efficiency in the capacity resource procurement: Case studies of forward capacity markets in ISO New England, PJM and Great Britain

International Nuclear Information System (INIS)

Liu, Yingqi

2017-01-01

Demand-side resources like demand response (DR) and energy efficiency (EE) can contribute to the capacity adequacy underpinning power system reliability. Forward capacity markets are established in many liberalised markets to procure capacity, with a strong interest in procuring DR and EE. With case studies of ISO New England, PJM and Great Britain, this paper examines the process and trends of procuring DR and EE in forward capacity markets, and the design for integration mechanisms. It finds that the contribution of DR and EE varies wildly across these three capacity markets, due to a set of factors regarding mechanism design, market conditions and regulatory provisions, and the offering of EE is more heavily influenced by regulatory utility EE obligation. DR and EE are complementary in targeting end-uses and customers for capacity resources, thus highlighting the value of procuring them both. System needs and resources’ market potential need to be considered in defining capacity products. Over the long-term, it is important to ensure the removal of barriers for these demand-side resources and the capability of providers in addressing risks of unstable funding and forward planning. For the EDR Pilot in the UK, better coordination with forward capacity auction needs to be achieved. - Highlights: • Trends of demand response and energy efficiency in capacity markets are analysed. • Integration mechanisms, market conditions and regulatory provisions are key factors. • Participation of energy efficiency is influenced by regulatory utility obligations. • Procuring both demand response and energy efficiency in capacity market is valuable. • Critical analysis of the design of capacity products and integration mechanisms.

EDUCATION, WORK AND THEIR RELATIONS THROUGHOUT HISTORY OF HUMANITY IN DIFFERENT MODES OF PRODUCTION OF EXISTENCE

Directory of Open Access Journals (Sweden)

Denize Cristina Kaminski Ferreira

2011-12-01

Full Text Available The present article has as objective to analyze the relation between education and work throughout the history of the humanity, for in such a way, the starting point is the conceptualization of the related categories, as well as the exposition of its variations and relation in the different ways of material production of the existence human being (primitive community, slavery society, feudal system and capitalism, aiming at to apprehend the multiple influences that both exert between itself, in order to make possible a bigger understanding of the historical and social evolution of the man

Development of a process for high capacity arc heater production of silicon for solar arrays

Science.gov (United States)

Meyer, T. N.

1980-01-01

A high temperature silicon production process using existing electric arc heater technology is discussed. Silicon tetrachloride and a reductant, liquid sodium, were injected into an arc heated mixture of hydrogen and argon. Under these high temperature conditions, a very rapid reaction occurred, yielding silicon and gaseous sodium chloride. Techniques for high temperature separation and collection of the molten silicon were developed. The desired degree of separation was not achieved. The electrical, control and instrumentation, cooling water, gas, SiCl4, and sodium systems are discussed. The plasma reactor, silicon collection, effluent disposal, the gas burnoff stack, and decontamination and safety are also discussed. Procedure manuals, shakedown testing, data acquisition and analysis, product characterization, disassembly and decontamination, and component evaluation are reviewed.

The capacity of black holes to transmit quantum information

International Nuclear Information System (INIS)

Brádler, Kamil; Adami, Christoph

2014-01-01

We study the properties of the quantum information transmission channel that emerges from the quantum dynamics of particles interacting with a black hole horizon. We calculate the quantum channel capacity in two limiting cases where a single-letter capacity is known to exist: the limit of perfectly reflecting and perfectly absorbing black holes. We find that the perfectly reflecting black hole channel is closely related to the Unruh channel and that its capacity is non-vanishing, allowing for the perfect reconstruction of quantum information outside of the black hole horizon. We also find that the complementary channel (transmitting entanglement behind the horizon) is entanglement-breaking in this case, with vanishing capacity. We then calculate the quantum capacity of the black hole channel in the limit of a perfectly absorbing black hole and find that this capacity vanishes, while the capacity of the complementary channel is non-vanishing instead. Rather than inviting a new crisis for quantum physics, this finding instead is in accordance with the quantum no-cloning theorem, because it guarantees that there are no space-like surfaces that contain both the sender’s quantum state and the receiver’s reconstructed quantum state

The capacity of black holes to transmit quantum information

Energy Technology Data Exchange (ETDEWEB)

Brádler, Kamil [Department of Astronomy and Physics, Saint Mary’s University,Halifax, Nova Scotia, B3H 3C3 (Canada); Adami, Christoph [Department of Physics and Astronomy, Michigan State University,East Lansing, MI 48824 (United States)

2014-05-21

We study the properties of the quantum information transmission channel that emerges from the quantum dynamics of particles interacting with a black hole horizon. We calculate the quantum channel capacity in two limiting cases where a single-letter capacity is known to exist: the limit of perfectly reflecting and perfectly absorbing black holes. We find that the perfectly reflecting black hole channel is closely related to the Unruh channel and that its capacity is non-vanishing, allowing for the perfect reconstruction of quantum information outside of the black hole horizon. We also find that the complementary channel (transmitting entanglement behind the horizon) is entanglement-breaking in this case, with vanishing capacity. We then calculate the quantum capacity of the black hole channel in the limit of a perfectly absorbing black hole and find that this capacity vanishes, while the capacity of the complementary channel is non-vanishing instead. Rather than inviting a new crisis for quantum physics, this finding instead is in accordance with the quantum no-cloning theorem, because it guarantees that there are no space-like surfaces that contain both the sender’s quantum state and the receiver’s reconstructed quantum state.

THE UTILIZATION STRUCTURE OF THERMAL WATER WELLS AND ITS UNEXPLOITED CAPACITIES IN HUNGARY

Directory of Open Access Journals (Sweden)

BALÁZS KULCSÁR

2014-12-01

Full Text Available In order to mitigate Hungary’s vulnerability in energy supply and accomplish the renewable energy production targets, it is essential to discover exploitable alternative opportunities for energy production and step up the utilization of the available capacities. The purpose of this publication is to map up the utilization structure of the existing Hungarian thermal water wells, describe its changes over the past 16 years, reveal the associated reasons and define the unutilized well capacities that may contribute to increasing the exploitation of geothermal heat by municipalities. The studies have been conducted in view of the Cadaster of Thermal Water Wells of Hungary compiled in 1994, the well cadasters kept by the regional water management directorates, as well as the data of the digital thermal water cadaster of 2010. The calculations performed for the evaluation of data have been based on the ratios and respective utilization areas of the existing wells. In the past 150 years, nearly 1500 thermal water wells have been drilled for use by a broad range of economic operations. The principal goals of constructing thermal water wells encompass the use of water in balneology, water and heat supply to the agriculture, hydrocarbon research and the satisfaction of municipal water demands. In 1994, 26% of the facilities was operated as baths, 21% was used by agriculture, while 13% and 12% served communal and waterworks supply, respectively. Then in 2010, 31% of thermal water wells was continued to be used for the water supply of bathing establishments, followed by 20% for agricultural use, 19% for utilization by waterworks, 11% for observation purposes and 10% for communal use. During the 16 years between 1994 and 2010, the priorities of utilization often changed, new demands emerged in addition to the former utilization goals of thermal water wells. The economic landscape and changes in consumer habits have transformed the group of consumers, which

Seismic evaluation of existing nuclear power plants

International Nuclear Information System (INIS)

2003-01-01

The IAEA nuclear safety standards publications address the site evaluation and the design of new nuclear power plants (NPPs), including seismic hazard assessment and safe seismic design, at the level of the Safety Requirements as well as at the level of dedicated Safety Guides. It rapidly became apparent that the existing nuclear safety standards documents were not adequate for handling specific issues in the seismic evaluation of existing NPPs, and that a dedicated document was necessary. This is the purpose of this Safety Report, which is written in the spirit of the nuclear safety standards and can be regarded as guidance for the interpretation of their intent. Worldwide experience shows that an assessment of the seismic capacity of an existing operating facility can be prompted for the following: (a) Evidence of a greater seismic hazard at the site than expected before, owing to new or additional data and/or to new methods; (b) Regulatory requirements, such as periodic safety reviews, to ensure that the plant has adequate margins for seismic loads; (c) Lack of anti-seismic design or poor anti-seismic design; (d) New technical finding such as vulnerability of some structures (masonry walls) or equipment (relays), other feedback and new experience from real earthquakes. Post-construction evaluation programmes evaluate the current capability of the plant to withstand the seismic concern and identify any necessary upgrades or changes in operating procedures. Seismic qualification is distinguished from seismic evaluation primarily in that seismic qualification is intended to be performed at the design stage of a plant, whereas seismic evaluation is intended to be applied after a plant has been constructed. Although some guidelines do exist for the evaluation of existing NPPs, these are not established at the level of a regulatory guide or its equivalent. Nevertheless, a number of existing NPPs throughout the world have been and are being subjected to review of their

Phenolic Compounds of Cereals and Their Antioxidant Capacity.

Science.gov (United States)

Van Hung, Pham

2016-01-01

Phenolic compounds play an important role in health benefits because of their highly antioxidant capacity. In this review, total phenolic contents (TPCs), phenolic acid profile and antioxidant capacity of the extracted from wheat, corn, rice, barley, sorghum, rye, oat, and millet, which have been recently reported, are summarized. The review shows clearly that cereals contain a number of phytochemicals including phenolics, flavonoids, anthocyanins, etc. The phytochemicals of cereals significantly exhibit antioxidant activity as measured by trolox equivalent antioxidant capacity (TEAC), 2,2-diphenyl-1-picrylhydrazyl radical scavenging, reducing power, oxygen radical absorbance capacity (ORAC), inhibition of oxidation of human low-density lipoprotein (LDL) cholesterol and DNA, Rancimat, inhibition of photochemilumenescence (PCL), and iron(II) chelation activity. Thus, the consumption of whole grains is considered to have significantly health benefits in prevention from chronic diseases such as cardiovascular disease, diabetes, and cancer because of the contribution of phenolic compounds existed. In addition, the extracts from cereal brans are considered to be used as a source of natural antioxidants.

Nitrogen expander cycles for large capacity liquefaction of natural gas

Energy Technology Data Exchange (ETDEWEB)

Chang, Ho-Myung; Park, Jae Hoon; Gwak, Kyung Hyun [Hong Ik University, Department of Mechanical Engineering, Seoul, 121-791 (Korea, Republic of); Choe, Kun Hyung [Korea Gas Corporation, Incheon, 406-130 (Korea, Republic of)

2014-01-29

Thermodynamic study is performed on nitrogen expander cycles for large capacity liquefaction of natural gas. In order to substantially increase the capacity, a Brayton refrigeration cycle with nitrogen expander was recently added to the cold end of the reputable propane pre-cooled mixed-refrigerant (C3-MR) process. Similar modifications with a nitrogen expander cycle are extensively investigated on a variety of cycle configurations. The existing and modified cycles are simulated with commercial process software (Aspen HYSYS) based on selected specifications. The results are compared in terms of thermodynamic efficiency, liquefaction capacity, and estimated size of heat exchangers. The combination of C3-MR with partial regeneration and pre-cooling of nitrogen expander cycle is recommended to have a great potential for high efficiency and large capacity.

Nitrogen expander cycles for large capacity liquefaction of natural gas

Science.gov (United States)

Chang, Ho-Myung; Park, Jae Hoon; Gwak, Kyung Hyun; Choe, Kun Hyung

2014-01-01

Thermodynamic study is performed on nitrogen expander cycles for large capacity liquefaction of natural gas. In order to substantially increase the capacity, a Brayton refrigeration cycle with nitrogen expander was recently added to the cold end of the reputable propane pre-cooled mixed-refrigerant (C3-MR) process. Similar modifications with a nitrogen expander cycle are extensively investigated on a variety of cycle configurations. The existing and modified cycles are simulated with commercial process software (Aspen HYSYS) based on selected specifications. The results are compared in terms of thermodynamic efficiency, liquefaction capacity, and estimated size of heat exchangers. The combination of C3-MR with partial regeneration and pre-cooling of nitrogen expander cycle is recommended to have a great potential for high efficiency and large capacity.

Nitrogen expander cycles for large capacity liquefaction of natural gas

International Nuclear Information System (INIS)

Chang, Ho-Myung; Park, Jae Hoon; Gwak, Kyung Hyun; Choe, Kun Hyung

2014-01-01

Thermodynamic study is performed on nitrogen expander cycles for large capacity liquefaction of natural gas. In order to substantially increase the capacity, a Brayton refrigeration cycle with nitrogen expander was recently added to the cold end of the reputable propane pre-cooled mixed-refrigerant (C3-MR) process. Similar modifications with a nitrogen expander cycle are extensively investigated on a variety of cycle configurations. The existing and modified cycles are simulated with commercial process software (Aspen HYSYS) based on selected specifications. The results are compared in terms of thermodynamic efficiency, liquefaction capacity, and estimated size of heat exchangers. The combination of C3-MR with partial regeneration and pre-cooling of nitrogen expander cycle is recommended to have a great potential for high efficiency and large capacity

Changing recruitment capacity in global fish stocks.

Science.gov (United States)

Britten, Gregory L; Dowd, Michael; Worm, Boris

2016-01-05

Marine fish and invertebrates are shifting their regional and global distributions in response to climate change, but it is unclear whether their productivity is being affected as well. Here we tested for time-varying trends in biological productivity parameters across 262 fish stocks of 127 species in 39 large marine ecosystems and high-seas areas (hereafter LMEs). This global meta-analysis revealed widespread changes in the relationship between spawning stock size and the production of juvenile offspring (recruitment), suggesting fundamental biological change in fish stock productivity at early life stages. Across regions, we estimate that average recruitment capacity has declined at a rate approximately equal to 3% of the historical maximum per decade. However, we observed large variability among stocks and regions; for example, highly negative trends in the North Atlantic contrast with more neutral patterns in the North Pacific. The extent of biological change in each LME was significantly related to observed changes in phytoplankton chlorophyll concentration and the intensity of historical overfishing in that ecosystem. We conclude that both environmental changes and chronic overfishing have already affected the productive capacity of many stocks at the recruitment stage of the life cycle. These results provide a baseline for ecosystem-based fisheries management and may help adjust expectations for future food production from the oceans.

The mere exposure effect for consumer products as a consequence of existing familiarity and controlled exposure.

Science.gov (United States)

Hekkert, Paul; Thurgood, Clementine; Whitfield, T W Allan

2013-10-01

The finding that repeated exposure to a stimulus enhances attitudes directed towards it is a well-established phenomenon. Despite this, the effects of exposure to products are difficult to determine given that they could have previously been exposed to participants any number of times. Furthermore, factors other than simple repeated exposure can influence affective evaluations for stimuli that are meaningful. In our first study, we examined the influence of existing familiarity with common objects and showed that the attractiveness of shapes representing common objects increases with their rated commonness. In our second study, we eliminated the effects of prior exposure by creating fictitious yet plausible products; thus, exposure frequency was under complete experimental control. We also manipulated the attention to be drawn to the products' designs by placing them in contexts where their visual appearance was stressed to be important versus contexts in which it was indicated that little attention had been paid to their design. Following mere exposure, attractiveness ratings increased linearly with exposure frequency, with the slope of the function being steeper for stimuli presented in an inconspicuous context-indicating that individuals engage in more deliberate processing of the stimuli when attention is drawn to their visual appearance. © 2013 Elsevier B.V. All rights reserved.

A stochastic inventory policy with limited transportation capacity

NARCIS (Netherlands)

Dabia, S.; Kiesmüller, G.P.; Dellaert, N.P.

2007-01-01

In this paper we consider a stochastic single-item inventory problem. A retailer keeps a single product on stock to satisfy customers stochastic demand. The retailer is replenished periodically from a supplier with ample stock. For the delivery of the product, trucks with finite capacity are

Link Between Capacity for Current Production and Syntrophic Growth in Geobacter species

Directory of Open Access Journals (Sweden)

Amelia-Elena eRotaru

2015-07-01

Full Text Available Electrodes are unnatural electron acceptors, and it is yet unknown how some Geobacter species evolved to use electrodes as terminal electron acceptors. Analysis of different Geobacter species revealed that they varied in their capacity for current production. G. metallireducens and G. hydrogenophilus generated high current densities (ca. 0.05 mA/cm2, comparable to G. sulfurreducens. G. bremensis, G. chapellei, G. humireducens, and G. uranireducens, produced much lower currents (ca. 0.05 mA/cm2 and G. bemidjiensis was previously found to not produce current. There was no correspondence between the effectiveness of current generation and Fe(III oxide reduction rates. Some high-current-density strains (G. metallireducens and G. hydrogenophilus reduced Fe(III-oxides as fast as some low-current-density strains (G. bremensis, G. humireducens, and G. uranireducens whereas other low-current-density strains (G. bemidjiensis and G. chapellei reduced Fe(III oxide as slowly as G. sulfurreducens, a high-current-density strain. However, there was a correspondence between the ability to produce higher currents and the ability to grow syntrophically. G. hydrogenophilius was found to grow in co-culture with Methanosarcina barkeri, which is capable of direct interspecies electron transfer (DIET, but not with Methanospirillium hungatei capable only of H2 or formate transfer. Conductive granular activated carbon (GAC stimulated metabolism of the G. hydrogenophilus - M. barkeri co-culture, consistent with electron exchange via DIET. These findings, coupled with the previous finding that G. metallireducens and G. sulfurreducens are also capable of DIET, suggest that evolution to optimize DIET has fortuitiously conferred the capability for high-density current production to some Geobacter species.

Working memory is not fixed-capacity: More active storage capacity for real-world objects than for simple stimuli.

Science.gov (United States)

Brady, Timothy F; Störmer, Viola S; Alvarez, George A

2016-07-05

Visual working memory is the cognitive system that holds visual information active to make it resistant to interference from new perceptual input. Information about simple stimuli-colors and orientations-is encoded into working memory rapidly: In under 100 ms, working memory ‟fills up," revealing a stark capacity limit. However, for real-world objects, the same behavioral limits do not hold: With increasing encoding time, people store more real-world objects and do so with more detail. This boost in performance for real-world objects is generally assumed to reflect the use of a separate episodic long-term memory system, rather than working memory. Here we show that this behavioral increase in capacity with real-world objects is not solely due to the use of separate episodic long-term memory systems. In particular, we show that this increase is a result of active storage in working memory, as shown by directly measuring neural activity during the delay period of a working memory task using EEG. These data challenge fixed-capacity working memory models and demonstrate that working memory and its capacity limitations are dependent upon our existing knowledge.

Oligopolitistic game around capacity expansion in liberalized electricity industries: The case of the French

International Nuclear Information System (INIS)

Gilotte, Laurent; Finon, Dominique; Pignon, Virginie

2005-01-01

The future evolution of the French electricity market is modelled with a long-term (30 years) stochastic Cournot game. The model is inspired from Pineau and Murto (Annals of operations research,121, pp.123-148). Future demand functions are random. Players chose for each future date their levels of investment in generation capacities and the capacities made available on the market, as functions of the future random realizations until the corresponding date (''sample adapted open-loop'' strategies). Players use the same objective probability distribution on the realization of the random variables determining the load demand functions of each period. Two load periods are described. Large phasing out of existing capacities begins by 2017 and new capacities invested can be thermal or nuclear. Hydropower availability is exogenous. Different market structures are studied: First, the current distribution of capacities in the present French market is maintained in time 0 and one major player compete with two small players ; second, we assume that the generation capacities existing in time 0 are splitted between three equally sized players. Preliminary results on investments and prices are compared with those obtained for a benchmark case of social planning. (Author)

Markets and Institutional Capacity

DEFF Research Database (Denmark)

Ingemann, Jan Holm

2010-01-01

Adequate explanations concerning the introduction of production and consumption of organic food in Denmark imply the necessity to engage a certain understanding of markets. Markets should subsequently not be seen as entities nor places but as complex relations between human actors. Further......, the establishment, maintenance and development of markets are depending on the capacity of the actors to enter into continuous and enhancing interplay....

Volume Flexibility and Capacity Investment : A Real Options Approach

OpenAIRE

Wen, X.; Kort, P.M.; Talman, A.J.J.

2015-01-01

Abstract: This paper considers the investment decision of a firm where it has to decide about the timing and capacity. We obtain that in a fast-growing market, right after investment the firm produces below capacity, where the utilization rate (the proportion of capacity that is used for production right after the investment) increases with market uncertainty for a very big market trend, and shows no monotonicity for a moderately large market trend. On the other hand, we get that, for a slowl...

Interference and memory capacity effects in memristive systems

Science.gov (United States)

Hermiz, John; Chang, Ting; Du, Chao; Lu, Wei

2013-02-01

Short-term memory implies the existence of a capacity limit beyond which memory cannot be securely formed and retained. The underlying mechanisms are believed to be two primary factors: decay and interference. Here, we demonstrate through both simulation and experiment that the memory capacity effect can be implemented in a parallel memristor circuit, where decay and interference are achieved by the inherent ion diffusion in the device and the competition for current supply in the circuit, respectively. This study suggests it is possible to emulate high-level biological behaviors with memristor circuits and will stimulate continued studies on memristor-based neuromorphic circuits.

Comparison of different tests used in mapping the Greek virgin olive oil production for the determination of its total antioxidant capacity

Energy Technology Data Exchange (ETDEWEB)

Minioti, K. S.; Georgiou, C. A.

2010-07-01

This study aims to map the total antioxidant capacity (Tac) of 50 Greek olive oil samples from the 2005-2006 season according to production region and cultivar and to compare the 2, 2'-amino-bis (3-ethylbenzo-thiazoline-6- sulfonic acid (Abets), 2, 2-diphenyl-1-picrylhydrazyl radical (DPPH) and F olin-Ciocalteu tests for use with olive oil. Antioxidant capacities determined in the hydrophilic fraction range between 5.42 - 22.5 mM gallic acid Kg{sup -}1 olive oil for the ABTS method and 1.29 - 9.95 mM Kg{sup -}1 for the DPPH method while in total, olive oil TAC ranges between 77 - 177 mM Kg{sup -}1 as assessed by the DPPH method. The results of total phenol content range between 3.8 and 29.4 mM Kg{sup -}1 olive oil. Total phenol content correlates with total antioxidant capacity assessed in the hydrophilic fraction through the DPPH (r = 0.89) and the ABTS (r = 0.69) assays. The hydrophilic fraction DPPH values correlate significantly with the ABTS values (r = 0.81). However, the DPPH values for total olive oil correlate poorly with the ABTS assay, the Folin-Ciocalteu method and the DPPH assay in hydrophilic fraction. Although total phenolic content shows good correlation with ABTS and DPPH values and could serve as a useful indicator for olive oil antioxidant capacity, the use of a battery of tests contributes to better characterization of the antioxidant capacity of olive oil. (Author) 14 refs.

Prediction of the theoretical capacity of non-aqueous lithium-air batteries

International Nuclear Information System (INIS)

Tan, Peng; Wei, Zhaohuan; Shyy, W.; Zhao, T.S.

2013-01-01

Highlights: • The theoretical capacity of non-aqueous lithium-air batteries is predicted. • Key battery design parameters are defined and considered. • The theoretical battery capacity is about 10% of the lithium capacity. • The battery mass and volume changes after discharge are also studied. - Abstract: In attempt to realistically assess the high-capacity feature of emerging lithium-air batteries, a model is developed for predicting the theoretical capacity of non-aqueous lithium-air batteries. Unlike previous models that were formulated by assuming that the active materials and electrolyte are perfectly balanced according to the electrochemical reaction, the present model takes account of the fraction of the reaction products (Li 2 O 2 and Li 2 O), the utilization of the onboard lithium metal, the utilization of the void volume of the porous cathode, and the onboard excess electrolyte. Results show that the gravimetric capacity increases from 1033 to 1334 mA h/g when the reaction product varies from pure Li 2 O 2 to pure Li 2 O. It is further demonstrated that the capacity declines drastically from 1080 to 307 mA h/g when the case of full utilization of the onboard lithium is altered to that only 10% of the metal is utilized. Similarly, the capacity declines from 1080 to 144 mA h/g when the case of full occupation of the cathode void volume by the reaction products is varied to that only 10% of the void volume is occupied. In general, the theoretical gravimetric capacity of typical non-aqueous lithium-air batteries falls in the range of 380–450 mA h/g, which is about 10–12% of the gravimetric capacity calculated based on the energy density of the lithium metal. The present model also facilitates the study of the effects of different parameters on the mass and volume change of non-aqueous lithium-air batteries

STRUCTURIZATION OF COMPETITIVE CAPACITY OF TRADE ORGANIZATION

Directory of Open Access Journals (Sweden)

N. A. Sеrеbrуаkоvа

2015-01-01

Full Text Available The modern consumer market is characterized by a complex of immanent tendencies of development, the competitive relations reflecting specifics inherent in it. These tendencies of development of the competitive environment of the consumer market are in many respects caused by a state and extent of use of competitive capacity of the organizations functioning in this market. This obvious circumstance causes the necessity of complex scientific research of competitive capacity of trade organizations, including its structures, for definition of prospects of its sustainable strategic development. Immanent properties of competitive capacity of trade organization allowed to study in detail its structure, by means of the substantial review of the existing options of its representation and their systematization on specific, element and system signs. In development of specific structure of competitive potential its addition commercial, technological, communication, consumer and image the potentials reflecting functional and branch specifics of activity of trade organization is offered. The system of elements of competitive capacity of trade organization is given by its structure-forming types. It is proved that these elements aren't characterized by strict distribution by types of potentials, and separate from elements are universal, accepted for simultaneous use when forming all types of potential. Allocation of a system sign of structurization of competitive potential was based on situation that "systemacity" has to be provided not so much with hierarchy of hierarchy of types and elements of potential, their interrelations, how many possibility of the accounting of various classification signs allowing to typify competitive potential as system integrity, regardless of its separate types. Those signs were the stage of a demand and level of use in economic activity, economic feasibility of existence of unrealized potential, the origin nature.

CHARACTERISTICS AND SPECIFICITIES OF THE DEVELOPMENT OF TOURISTIC RECEPTION ESTABLISHMENTS AND THE EXISTING ACCOMMODATION CAPACITY IN TERRITORIAL PROFILE IN ROMANIA, DURING 2002 - 2012. AN ECONOMETRIC APPROACH

Directory of Open Access Journals (Sweden)

MARIAN ZAHARIA

2014-02-01

Full Text Available The economic evolutions in Romania, in the first decade of the XXI century, were marked by increases and decreases with rather large amplitudes. Growth period up to 2008 was followed by a significant recession, the economic crisis started in 2009 having implications in the all economic sectors. After 2011 the economy starts to recover so that we are witnessing a new process of growth. The tourism, industry of the national economy, has perceived the economic crisis also. The number of touristic reception establishment and the existing accommodation capacity has recorded regresses. Both during growth and during the economic crisis, at the regional level, the developments differ significantly. This paper, based on statistical and econometric analysis, highlights the characteristics and peculiarities of the ways in which evolved the indicators of tourism supply of accommodation, both at the macro-regions and development regions of Romania, during the period 2002 2012.

Very-large-scale production of antibodies in plants: The biologization of manufacturing.

Science.gov (United States)

Buyel, J F; Twyman, R M; Fischer, R

2017-07-01

Gene technology has facilitated the biologization of manufacturing, i.e. the use and production of complex biological molecules and systems at an industrial scale. Monoclonal antibodies (mAbs) are currently the major class of biopharmaceutical products, but they are typically used to treat specific diseases which individually have comparably low incidences. The therapeutic potential of mAbs could also be used for more prevalent diseases, but this would require a massive increase in production capacity that could not be met by traditional fermenter systems. Here we outline the potential of plants to be used for the very-large-scale (VLS) production of biopharmaceutical proteins such as mAbs. We discuss the potential market sizes and their corresponding production capacities. We then consider available process technologies and scale-down models and how these can be used to develop VLS processes. Finally, we discuss which adaptations will likely be required for VLS production, lessons learned from existing cell culture-based processes and the food industry, and practical requirements for the implementation of a VLS process. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

R&D INVESTMENTS AND SPILLOVERS UNDER ENDOGENOUS ABSORPTIVE CAPACITY: COMPETITIVE R&D CANNOT TAKE FULL-ADVANTAGE OF COMPLEMENTARITY IN ABSORPTIVE CAPACITY WHILE COOPERATIVE R&D CAN

Directory of Open Access Journals (Sweden)

Mário A.P.M. Da Silva

2018-03-01

Full Text Available We show that the setting up of general conditions on complementarity in absorptive capacity gives rise to different, if not opposite Nash equilibrium outcomes to those found when absorptive capacity is assumed to be determined only by the similarity of R&D orientations. Firms that cooperate in R&D can take full-advantage of complementarity in R&D by adopting firm-specific R&D paths, which appears to contradict findings and predictions of existing theoretical literature on R&D and spillovers. Oddly, firms competing in R&D cannot gain the most from the potential of complementarity in knowledge by not choosing firm-specific R&D approaches in equilibrium under even milder conditions, which is contrary to another prediction of existing related models.

Public health and health promotion capacity at national and regional level: a review of conceptual frameworks

Directory of Open Access Journals (Sweden)

Christoph Aluttis

2014-04-01

Full Text Available The concept of capacity building for public health has gained much attention during the last decade. National as well as international organizations increasingly focus their efforts on capacity building to improve performance in the health sector. During the past two decades, a variety of conceptual frameworks have been developed which describe relevant dimensions for public health capacity. Notably, these frameworks differ in design and conceptualization. This paper therefore reviews the existing conceptual frameworks and integrates them into one framework, which contains the most relevant dimensions for public health capacity at the country or regional level. A comprehensive literature search was performed to identify frameworks addressing public health capacity building at the national or regional level. We content-analysed these frameworks to identify the core dimensions of public health capacity. The dimensions were subsequently synthesized into a set of thematic areas to construct a conceptual framework which describes the most relevant dimensions for capacities at the national or regional level. The systematic review resulted in the identification of seven core domains for public health capacity: resources, organizational structures, workforce, partnerships, leadership and governance, knowledge development and country specific context. Accordingly, these dimensions were used to construct a framework, which describes these core domains more in detail. Our research shows that although there is no generally agreed upon model of public health capacity, a number of key domains for public health and health promotion capacity are consistently recurring in existing frameworks, regardless of their geographical location or thematic area. As only little work on the core concepts of public health capacities has yet taken place, this study adds value to the discourse by identifying these consistencies across existing frameworks and by synthesising

8760-Based Method for Representing Variable Generation Capacity Value in Capacity Expansion Models: Preprint

Energy Technology Data Exchange (ETDEWEB)

Frew, Bethany A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Cole, Wesley J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sun, Yinong [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Mai, Trieu T [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Richards, James [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-08-01

Capacity expansion models (CEMs) are widely used to evaluate the least-cost portfolio of electricity generators, transmission, and storage needed to reliably serve demand over the evolution of many years or decades. Various CEM formulations are used to evaluate systems ranging in scale from states or utility service territories to national or multi-national systems. CEMs can be computationally complex, and to achieve acceptable solve times, key parameters are often estimated using simplified methods. In this paper, we focus on two of these key parameters associated with the integration of variable generation (VG) resources: capacity value and curtailment. We first discuss common modeling simplifications used in CEMs to estimate capacity value and curtailment, many of which are based on a representative subset of hours that can miss important tail events or which require assumptions about the load and resource distributions that may not match actual distributions. We then present an alternate approach that captures key elements of chronological operation over all hours of the year without the computationally intensive economic dispatch optimization typically employed within more detailed operational models. The updated methodology characterizes the (1) contribution of VG to system capacity during high load and net load hours, (2) the curtailment level of VG, and (3) the potential reductions in curtailments enabled through deployment of storage and more flexible operation of select thermal generators. We apply this alternate methodology to an existing CEM, the Regional Energy Deployment System (ReEDS). Results demonstrate that this alternate approach provides more accurate estimates of capacity value and curtailments by explicitly capturing system interactions across all hours of the year. This approach could be applied more broadly to CEMs at many different scales where hourly resource and load data is available, greatly improving the representation of challenges

[Assessment of Functioning when Conducting Occupational Capacity Evaluations--What is "Evidence-Based"?].

Science.gov (United States)

Canela, Carlos; Schleifer, Roman; Dube, Anish; Hengartner, Michael P; Ebner, Gerhard; Seifritz, Erich; Liebrenz, Michael

2016-03-01

Occupational capacity evaluations have previously been subject to criticism for lacking in quality and consistency. To the authors' knowledge, there is no clear consensus on the best way to formally assess functioning within capacity evaluations. In this review we investigated different instruments that are used to assess functioning in occupational capacity evaluations. Systematic review of the literature. Though several instruments that assess functional capacity were found in our search, a specific validated instrument assessing occupational capacity as part of a larger psychiatric evaluation was not found. The limitations of the existing instruments on assessing functional capacity are discussed. Medical experts relying on instruments to conduct functional capacity evaluations should be cognizant of their limitations. The findings call for the development and use of an instrument specifically designed to assess the functional and occupational capacity of psychiatric patients, which is also likely to improve the quality of these reports. © Georg Thieme Verlag KG Stuttgart · New York.

40 CFR 415.344 - Pretreatment standards for existing sources (PSES).

Science.gov (United States)

2010-07-01

... Pigments Production Subcategory § 415.344 Pretreatment standards for existing sources (PSES). (a) Existing... chrome pigments process wastewater into a publicly owned treatment works are subject only to the... standards for existing sources (PSES): Subpart AH—Chrome Pigments Pollutant or pollutant property PSES...

Minimizing activated carbons production cost

International Nuclear Information System (INIS)

Stavropoulos, G.G.; Zabaniotou, A.A.

2009-01-01

A detailed economic evaluation of activated carbons production process from various raw materials is undertaken using the conventional economic indices (ROI, POT, and NPV). The fundamental factors that affect production cost were taken into account. It is concluded that for an attractive investment in activated carbons production one should select the raw material with the highest product yield, adopt a chemical activation production scheme and should base product price on product-surface area (or more generally on product adsorption capacity for the adsorbate in consideration). A raw material that well meets the above-mentioned criteria is petroleum coke but others are also promising (charcoals, and carbon black). Production cost then can be optimized by determining its minimum value of cost that results from the intercept between the curves of plant capacity and raw material cost - if any. Taking into account the complexity of such a techno-economic analysis, a useful suggestion could be to start the evaluations from a plant capacity corresponding to the break-even point, i. e. the capacity at which income equals production cost. (author)

The Supply of Medical Radioisotopes. 2016 Medical Isotope Supply Review: 99Mo/99mTc Market Demand and Production Capacity Projection 2016-2021

International Nuclear Information System (INIS)

Charlton, Kevin; )

2016-03-01

Medical diagnostic imaging techniques using technetium-99m ( 99 mTc) account for approximately 80% of all nuclear medicine procedures, representing 30-40 million examinations Worldwide every year. Disruptions in the supply chain of these medical isotopes - which have half-lives of 66 hours for molybdenum-99 ( 99 Mo) and only 6 hours for 99m Tc, and thus must be produced continuously - can lead to cancellations or delays in important medical testing services. Supply reliability has been challenged over the past decade due to unexpected shutdowns and extended refurbishment periods at some of the 99 Mo-producing research reactors and processing facilities. These shutdowns have at times created conditions for extended global supply shortages (e.g. 2009-2010). At the request of its member countries, the Nuclear Energy Agency (NEA) became involved in global efforts to ensure a secure supply of 99 Mo/ 99m Tc. Since June 2009, the NEA and its High-level Group on the Security of Supply of Medical Radioisotopes (HLG-MR) have examined the causes of supply shortages and developed a policy approach, including principles and supporting recommendations to address those causes. The NEA has also reviewed the global 99 Mo supply situation periodically, to highlight periods of potential reduced supply and to underscore the case for implementing the HLG-MR policy approach in a timely and globally consistent manner. In 2012, the NEA released a 99 Mo supply and demand forecast up to 2030, identifying periods of potential low supply relative to demand. That 2012 forecast was updated with a report in 2014 that focused on the much shorter 2015-2020 period. That report was updated in 2015 with a report, '2015 Medical Isotope Supply Review: 99 Mo/ 99m Tc Market Demand and Production Capacity Projection 2015-2020' (NEA, 2015), which focused on the same period. This report updates the 2015 report, and focuses on the important 2016-2021 period. At the end of 2015, the OSIRIS reactor

The Supply of Medical Radioisotopes. 2015 Medical Isotope Supply Review: 99Mo/99mTc Market Demand and Production Capacity Projection 2015-2020

International Nuclear Information System (INIS)

Charlton, Kevin; )

2015-08-01

Medical diagnostic imaging techniques using technetium-99m ( 99m Tc) account for approximately 80% of all nuclear medicine procedures, representing 30-40 million examinations Worldwide every year. Disruptions in the supply chain of these medical isotopes - which have half-lives of 66 hours for molybdenum-99 ( 99 Mo) and only 6 hours for 99m Tc, and thus must be produced continuously - can lead to cancellations or delays in important medical testing services. Unfortunately, supply reliability has been challenged over the past decade due to unexpected shutdowns and extended refurbishment periods at some of the mostly ageing, 99 Mo-producing research reactors and processing facilities. These shutdowns have at times created conditions for extended global supply shortages (e.g. 2009-2010). At the request of its member countries, the Nuclear Energy Agency (NEA) became involved in global efforts to ensure a secure supply of 99 Mo/ 99m Tc. Since June 2009, the NEA and its High-level Group on the Security of Supply of Medical Radioisotopes (HLG-MR) have examined the causes of supply shortages and developed a policy approach, including principles and supporting recommendations to address those causes. The NEA has also reviewed the global 99 Mo supply situation periodically, using the most up-to-date data available from supply chain participants, to highlight periods of potential reduced supply and to underscore the case for implementing the HLG-MR policy approach in a timely and globally consistent manner. In 2012, the NEA released a M o supply and demand forecast up to 2030, identifying periods of potential low supply relative to demand. That 2012 forecast was updated with a report 'Medical Isotope Supply in the Future: Production Capacity and Demand Forecast for the 99 Mo/ 99m Tc Market 2015-2020' (NEA, 2014) in 2014 that focused on the much shorter 2015-2020 period. This report updates the 2014 report, and continues to focus on the potentially critical 2015

Research on the method of measuring space information network capacity in communication service

Directory of Open Access Journals (Sweden)

Zhu Shichao

2017-02-01

Full Text Available Because of the large scale characteristic of space information network in terms of space and time and the increasing of its complexity,existing measuring methods of information transmission capacity have been unable to measure the existing and future space information networkeffectively.In this study,we firstly established a complex model of space information network,and measured the whole space information network capacity by means of analyzing data access capability to the network and data transmission capability within the network.At last,we verified the rationality of the proposed measuring method by using STK and Matlab simulation software for collaborative simulation.

The Relation of Design Parameters, Plant Capacity and Processing Costs in Cobalt-60 Sterilization Plants

International Nuclear Information System (INIS)

Brown, M.G.

1967-01-01

The paper describes the main features of three basic types of cobalt-60 sterilization plants which have been designed to provide a complete range of capacities for radiosterilization of medical products. The smallest plant has a capacity of up to 50 000 cubic feet of medical products a year, the intermediate size plant has a capacity of up to 500 000 cubic feet a year, and the largest plant has a capacity in excess of 1000 000 cubic feet a year. The relations between capital costs, rate of production, efficiency and unit processing costs for each type of plant are discussed. The method of selecting the best type of plant for a particular need will also be outlined. (author)

Expansion of Production Capacity in the Company Moje podjetje d.o.o. and its Impact on the Organizational Climate in the Company

Directory of Open Access Journals (Sweden)

Idriz Selimović

2016-05-01

Full Text Available Research Question (RQ: In a case study we will discuss the impact of expansion of production at the organizational climate of the company Mojepodjetje d.o.o. Method: When writing of the study was to systematically review the accomplishments of Experts on the surveyed area. We used the employee survey on the topic of expansion of production capacity of the company Mojepodjetjed.o.o. where we reasonably composite questionnaire come up with interesting findings. Results:: As a result of the research presented results of the survey on the planned expansion of production capacities Organization: Organizations must consider the fact that employees are people with feelings, specific desires and aspirations that motivate and inhibit different things. Employees are not just numbers and folders in the Human Resources department, but one of the main drivers of development organizations. With thisstudy we will draw attention to this fact. Originality: In the literature we have not found a similar case example. Our study may encourage critical evaluation of the impact of the human factor in the success of the expansion of operations of the organization. Limitations/Future Research: The study was limited to only one organization in the future it would be good to do a similar study had similar to what the company and to compare the results obtained with our own.

Graduate employability capacities, self-esteem and career adaptability among South African young adults

Directory of Open Access Journals (Sweden)

Sadika Ismail

2017-08-01

Full Text Available Orientation: Employers expect young graduates to have a well-rounded sense of self, to display a range of graduate employability capacities and to adapt to constant changes they are faced with in order to obtain and maintain employment. Research purpose: The goals of this study are (1 to investigate whether a significant relationship exists between graduate employability capacities, self-esteem and career adaptability, (2 to ascertain if a set of graduate employability capacities, when combined with self-esteem, has a significant relationship with a set of career adaptability capacities and (3 to identify the major variables that contribute to this relationship. Motivation for the study: The potential for career adaptability, graduate employability capacities and self-esteem of young adults promotes employability among graduates, thereby addressing and possibly reducing youth unemployment in South Africa. Research approach, design and method: A quantitative, cross-sectional research design approach was utilised in which descriptive statistics, Pearson product-moment correlations and canonical correlation analysis were employed to accomplish the objectives of this study. Respondents (N = 332 were enrolled at further education and training (FET colleges and were predominantly black (98.5% and female (62% students between the ages of 18 and 29. Main findings: The results displayed positive multivariate relationships between the variables and furthermore showed that graduate employability capacities contributed the most in terms of clarifying the respondents’ career adaptability as compared to their self-esteem. Practical and managerial implications: This study proposes that young adults’ career adaptability can be enhanced through the development of their self-esteem and particularly their graduate employability capacities, thus making them more employable. Contributions: Theoretically, this study proves useful because of the significant

Proliferative capacity of murine hematopoietic stem cells

International Nuclear Information System (INIS)

Hellman, S.; Botnick, L.E.; Hannon, E.C.; Vigneulle, R.M.

1978-01-01

The present study demonstrates a decrease in self-renewal capacity with serial transfer of murine hematopoietic stem cells. Production of differentiated cell progeny is maintained longer than stem cell self-renewal. In normal animals the capacity for self-renewal is not decreased with increasing donor age. The stem cell compartment in normal animals, both young and old, appears to be proliferatively quiescent. After apparent recovery from the alkylating agent busulfan, the probability of stem cell self-renewal is decreased, there is a permanent defect in the capacity of the bone marrow for serial transplantation, and the stem cells are proliferatively active. These findings support a model of the hematopoietic stem cell compartment as a continuum of cells with decreasing capacities for self-renewal, increasing likelihood for differentiation, and increasing proliferative activity. Cells progress in the continuum in one direction and such progression is not reversible

BALANCE CAPACITY WITH VARIABILITY CAUSED BY HUMAN FACTOR: AN APPLICATION IN A LINE WITH MONTE CARLO SIMULATION

Directory of Open Access Journals (Sweden)

Augusto Sandes Mendes

2016-07-01

Full Text Available The variation in processing times due to the human factor between the working stations of a production line can generate queues resulting in a higher cost to the productive process. The objective of this study was to apply Monte Carlo simulation to balance the capacity of a production line with stations suffering variability in processing time due to the human factor. Simulations of the current situation of the production line were performed by comparing it with a proposal to align capacity with the production restriction in order to reduce inventories process while maintaining full capacity of the line. To develop the study, the selection involves the case of a company’s production line in the metal industry that produces machinery and products for metalworking area. The results allowed pointing suggestions for the company to reduce in-process inventory, keeping then total capacity of the line.

Entanglement capacity of nonlocal Hamiltonians: A geometric approach

International Nuclear Information System (INIS)

Lari, Behzad; Hassan, Ali Saif M.; Joag, Pramod S.

2009-01-01

We develop a geometric approach to quantify the capability of creating entanglement for a general physical interaction acting on two qubits. We use the entanglement measure proposed by us for N-qubit pure states [Ali Saif M. Hassan and Pramod S. Joag, Phys. Rev. A 77, 062334 (2008)]. This geometric method has the distinct advantage that it gives the experimentally implementable criteria to ensure the optimal entanglement production rate without requiring a detailed knowledge of the state of the two qubit system. For the production of entanglement in practice, we need criteria for optimal entanglement production, which can be checked in situ without any need to know the state, as experimentally finding out the state of a quantum system is generally a formidable task. Further, we use our method to quantify the entanglement capacity in higher level and multipartite systems. We quantify the entanglement capacity for two qutrits and find the maximal entanglement generation rate and the corresponding state for the general isotropic interaction between qutrits, using the entanglement measure of N-qudit pure states proposed by us [Ali Saif M. Hassan and Pramod S. Joag, Phys. Rev. A 80, 042302 (2009)]. Next we quantify the genuine three qubit entanglement capacity for a general interaction between qubits. We obtain the maximum entanglement generation rate and the corresponding three qubit state for a general isotropic interaction between qubits. The state maximizing the entanglement generation rate is of the Greenberger-Horne-Zeilinger class. To the best of our knowledge, the entanglement capacities for two qutrit and three qubit systems have not been reported earlier.

Japanese electric utilities call for IPP capacity

Energy Technology Data Exchange (ETDEWEB)

Jeffs, E.

1997-03-01

Japan`s ten power utilities have finally grasped the nettle, and called in IPPs to supply at least 3 GW of new capacity in each of the next ten years. The first twenty schemes awarded last year are all based on existing industrial energy producers, and consist mainly of coal- or oil-fired plants of 150 MW or less. 1 tab.

Hospital-Based Coalition to Improve Regional Surge Capacity

Directory of Open Access Journals (Sweden)

James M. Learning

2012-12-01

Full Text Available Introduction: Surge capacity for optimization of access to hospital beds is a limiting factor in response to catastrophic events. Medical facilities, communication tools, manpower, and resource reserves exist to respond to these events. However, these factors may not be optimally functioning to generate an effective and efficient surge response. The objective was to improve the function of these factors.Methods: Regional healthcare facilities and supporting local emergency response agencies developed a coalition (the Healthcare Facilities Partnership of South Central Pennsylvania; HCFP¬SCPA to increase regional surge capacity and emergency preparedness for healthcare facilities. The coalition focused on 6 objectives: (1 increase awareness of capabilities and assets, (2 develop and pilot test advanced planning and exercising of plans in the region, (3 augment written medical mutual aid agreements, (4 develop and strengthen partnership relationships, (5 ensure National Incident Management System compliance, and (6 develop and test a plan for effective utilization of volunteer healthcare professionals.Results: In comparison to baseline measurements, the coalition improved existing areas covered under all 6 objectives documented during a 24-month evaluation period. Enhanced communications between the hospital coalition, and real-time exercises, were used to provide evidence of improved preparedness for putative mass casualty incidents.Conclusion: The HCFP-SCPA successfully increased preparedness and surge capacity through a partnership of regional healthcare facilities and emergency response agencies.

Gas power production, surplus concepts and the transformation of hydro-electric rent into resource rent

International Nuclear Information System (INIS)

Amundsen, Eirik S.

1997-01-01

The paper considers the effects of introducing large scale gas power production capacity into an electricity sector based on hydropower. In this process the economic rent is transmitted from the hydro power sector to the resource rent in the gas power sector, but is along the way intermingled with ordinary producer surplus and quasi-rent stemming from increasing cost conditions in the production infrastructure and capacity constraints. The net effect on total rent generated depends on development in demand, demand elasticities, costs saved from delaying hydropower projects and the existence of producer surplus in gas power generation. The paper closes with a discussion of possible tax base changes following from the introduction of a thermal power system based on natural gas

Prediction of Liquid Specific Heat Capacity of Food Lipids.

Science.gov (United States)

Zhu, Xiaoyi; Phinney, David M; Paluri, Sravanti; Heldman, Dennis R

2018-04-01

Specific heat capacity (c p ) is a temperature dependent physical property of foods. Lipid-being a macromolecular component of food-provides some fraction of the food's overall heat capacity. Fats/oils are complex chemicals that are generally defined by carbon length and degree of unsaturation. The objective of this investigation was to use advanced specific heat capacity measurement to determine the effect of fatty acid chemical structure on specific heat capacity of food lipids. In this investigation, the specific heat capacity of a series of triacylglycerols were measured to quantify the influence of fatty acid composition on specific heat capacity based on two parameters; the -average carbon number (C) and the average number of double bonds (U). A prediction model for specific heat capacity of food lipids as a function of C, U and temperature (T) has been developed. A multiple linear regression to the three-parameter model (R 2 = 0.87) provided a good fit to the experimental data. The prediction model was evaluated by comparison with previously published specific heat capacity values of vegetable oils. It was found that the model provided a 0.53% error, while three other models from the literature predicted c p values with 0.85% to 1.83% average relative deviation from experimental data. The outcomes from this research confirm that the thermophysical properties of fat present in foods are directly related to the physical chemical properties. The specific heat capacity of food products is widely used in process design. Improvements of current models to predict specific heat capacity of food products will assist in the development of efficient processes and in the control of food quality and safety. Furthermore, the understanding of how changes in chemical structure of macromolecular components of foods effect thermophysical properties may begin to allude to models that are not just empirical, but represent portions of the differences in chemistry. © 2018

Does visual short-term memory have a high-capacity stage?

Science.gov (United States)

Matsukura, Michi; Hollingworth, Andrew

2011-12-01

Visual short-term memory (VSTM) has long been considered a durable, limited-capacity system for the brief retention of visual information. However, a recent work by Sligte et al. (Plos One 3:e1699, 2008) reported that, relatively early after the removal of a memory array, a cue allowed participants to access a fragile, high-capacity stage of VSTM that is distinct from iconic memory. In the present study, we examined whether this stage division is warranted by attempting to corroborate the existence of an early, high-capacity form of VSTM. The results of four experiments did not support Sligte et al.'s claim, since we did not obtain evidence for VSTM retention that exceeded traditional estimates of capacity. However, performance approaching that observed in Sligte et al. can be achieved through extensive practice, providing a clear explanation for their findings. Our evidence favors the standard view of VSTM as a limited-capacity system that maintains a few object representations in a relatively durable form.

STRATEGIES FOR INCREASING PRODUCTIVITY IN PRODUCTION SYSTEMS

Directory of Open Access Journals (Sweden)

Diego Pacheco

2014-05-01

Full Text Available The main objective of this article is to point a set of practical strategies that can be adopted to increase the capacity of constraints resources on production systems, when the constraint is inside the factory and not is in the market. To serve this purpose will be presented strategies based on best practices of the Theory of Constraints, Lean Manufacturing and Total Productive Maintenance. This article also presents the mains tools for the deployment of these methodologies. The survey results have provided an objective set of practical strategy that can be used to increase the capacity and productivity of production systems according to the needs of each manufacturing system.

The capacity investment decision for make-to-order production systems with demand rate control

NARCIS (Netherlands)

Bertrand, J.W.M.; Ooijen, van H.P.G.

2012-01-01

In this paper we study the capacity investment decision for make-to-order manufacturing firms that utilize a fixed capacity, operate in a stochastic, stationary market, and can influence their demand rate by increasing or decreasing their sales effort. We consider manufacturing situations that

Pilot-scale anaerobic co-digestion of sewage sludge with agro-industrial by-products for increased biogas production of existing digesters at wastewater treatment plants.

Science.gov (United States)

Maragkaki, A E; Fountoulakis, M; Gypakis, A; Kyriakou, A; Lasaridi, K; Manios, T

2017-01-01

Due to low degradability of dry solids, most of the digesters at wastewater treatment plants (WWTP) operate at low loading rates resulting in poor biogas yields. In this study, co-digestion of sewage sludge (SS) with olive mill wastewater (OMW), cheese whey (CW) and crude glycerol (CG) was studied in an attempt to improve biogas production of existing digesters at WWTPs. The effect of agro-industrial by-products in biogas production was investigated using a 220L pilot-scale (180L working volume) digester under mesophilic conditions (35°C) with a total feeding volume of 7.5L daily and a 24-day hydraulic retention time. The initial feed was sewage sludge and the bioreactor was operated using this feed for 40days. Each agro-industrial by-product was then added to the feed so that the reactor was fed continuously with 95% sewage sludge and 5% (v/v) of each examined agro-industrial by-product. The experiments showed that a 5% (v/v) addition of OMW, CG or CW to sewage sludge significantly increased biogas production by nearly 220%, 350% and 86% as values of 34.8±3.2L/d, 185.7±15.3L/d and 45.9±3.6L/d respectively, compared to that with sewage sludge alone (375ml daily, 5% v/v in the feed). The average removal of dissolved chemical oxygen demand (d-COD) ranged between 72 and 99% for organic loading rates between 0.9 and 1.5kgVSm -3 d -1 . Reduction in the volatile solids ranged between 25 and 40%. This work suggests that methane can be produced very efficiently by adding a small concentration (5%) of agro-industrial by-products and especially CG in the inlet of digesters treating sewage sludge. Copyright © 2016 Elsevier Ltd. All rights reserved.

Innovative automation solutions applied to nuclear fuel production and inspection processes

International Nuclear Information System (INIS)

Vas, Ananth

2012-01-01

The nuclear industry in India is slated for fast paced growth in the coming years, with a great focus on increasing the capacity for producing, inspecting and finally reprocessing of nuclear fuel. Modern techniques of industrial automation such as robotics, machine vision and laser based systems have been deployed extensively to improve the productivity and output of existing and future installations, particularly for the fuel handling stages mentioned

Estimation of bearing capacity of floating group of stone columns

OpenAIRE

Fattah, Mohammed Y.; Al-Neami, Mohammed A.; Shamel Al-Suhaily, Ahmed

2017-01-01

Stone column is one of the ground improvement techniques. This technique has a proven performance, short time schedule, durability, constructability and low costs. The stone column technique has been used as a method of reinforcement of soft ground over the past 30 years. The bearing capacity of the stone column still has high level of uncertainties because the existing formulas for the estimation of the bearing capacity are general and do not take into consideration the type of the stone col...

Radiation demineralised bone enhanced osteoinductive capacity after transplantation

International Nuclear Information System (INIS)

Phillips, G.O.; Al-Assaf, S.; Williams, P.A.; Plessis, A. du; Yim, C.J.

2007-01-01

Using a mediating alkyne gas during the radiation treatment prevents the degradation of natural and synthetic polysaccharides and proteins. The product has higher viscosity and is more elastic than the original material and, therefore, gives enhanced functionality. Protein, within demineralised bone, too can be modified to give enhanced osteoinductive capacity after transplantation. Thus new functionalities can be achieved from the new products produced in food and medical products

TECHNOLOGIES TO ENHANCE THE OPERATION OF EXISTING NATURAL GAS COMPESSION INFRASTRUCTURE

Energy Technology Data Exchange (ETDEWEB)

Anthony J. Smalley; Ralph E. Harris; Gary D. Bourn; Danny M. Deffenbaugh

2006-01-24

This quarterly report documents work performed under Tasks 15, 16, and 18 through 23 of the project entitled: ''Technologies to Enhance the Operation of Existing Natural Gas Compression Infrastructure''. The project objective is to develop and substantiate methods for operating integral engine/compressors in gas pipeline service, which reduce fuel consumption, increase capacity, and enhance mechanical integrity. The report presents results of design analysis performed on the TCVC10 engine/compressor installed at Dominion's Groveport Compressor Station to develop options and guide decisions for reducing pulsations and enhancing compressor system efficiency and capacity. The report further presents progress on modifying and testing the laboratory GMVH6 at SwRI for correcting air imbalance.

The potential to supply low temperature district heating to existing building area

DEFF Research Database (Denmark)

Li, Hongwei; Svendsen, Svend

2013-01-01

Low-temperature district heating (LTDH) has the advantages as reduced network heat loss, improved quality match between energy supply and energy demand, and increased utilization of low-grade waste heat and renewable energy. The LTDH represents the next generation district heating (DH) system...... to supply existing building areas which are characterized with high heating demand needs to be examined. In this paper, the DH network deliverable capacity to supply LTDH to an existing building area is studied based on building thermal performance and DH network hydraulic performance simulation....

Case studies of capacity building for biodiversity monitoring: Chapter 13

Science.gov (United States)

Schmeller, Dirk S.; Arvanitidis, Christos; Böhm, Monika; Brummitt, Neil; Chatzinikolaou, Eva; Costello, Mark J.; Ding, Hui; Gill, Michael J.; Haase, Peter; Juillard, Romain; García-Moreno, Jaime; Pettorelli, Nathalie; Peng, Cui; Riginos, Corinna; Schmiedel, Ute; Simaika, John P.; Waterman, Carly; Wu, Jun; Xu, Haigen; Belnap, Jayne; Walters, Michele; Scholes, Robert J.

2017-01-01

Monitoring the status and trends of species is critical to their conservation and management. However, the current state of biodiversity monitoring is insufficient to detect such for most species and habitats, other than in a few localised areas. One of the biggest obstacles to adequate monitoring is the lack of local capacity to carry out such programs. Thus, building the capacity to do such monitoring is imperative. We here highlight different biodiversity monitoring efforts to illustrate how capacity building efforts are being conducted at different geographic scales and under a range of resource, literacy, and training constraints. Accordingly, we include examples of monitoring efforts from within countries (Kenya, France, and China), within regions (Central America and the Arctic) and larger capacity building programs including EDGE (Evolutionarily Distinct and Globally Endangered) of Existence and the National Red List Alliance.

Panorama 2011: Exploration-production: activities and markets

International Nuclear Information System (INIS)

Saniere, A.; Serbutoviez, S.

2011-01-01

After a year of economic crisis in 2009, oil companies saw renewed demand and are reporting increased investment in 2010. Exploration-production activity is resuming, at a pace that varies by sector, but prices for goods and services remain depressed as a result of existing over-capacity. In particular, developments in Brazil and Iraq and growth in unconventional gas are helping to maintain the level of activity. Meanwhile, the catastrophic oil spill in the Gulf of Mexico is leading to tighter regulations and safety standards in offshore drilling. (author)

ANALYSIS OF THE CORRELATION BETWEEN THE EXISTING ACCOMMODATION CAPACITY AND THE NUMBER OF TOURISTS ARRIVED IN SUCEAVA COUNTY STRUCTURES OF TOURISTIC RECEPTION

Directory of Open Access Journals (Sweden)

Marian ZAHARIA

2008-06-01

Full Text Available In the international touristic practice, but also in the specialized literature, it is perceived the population’s trend to spend the leisure time in an active way, by practicing tourism. It is also noted the fact that the forms of tourism organized in the big crowded centers, with fixed, rigid, monotonous programs, with journeys from a crowded environment to another, don’t satisfy anymore the tourists’ aspirations, motivations, options. They prefer the countryside zones that offer a non-polluted environment, with a natural and cultural potential very slightly altered. Such an area, which is inscribed in the rich heritage of the Romanian tourism, is Suceava County, which, by its offer, may be envisaged as an exceptional touristic zone of Romania.  Suceava County, Bârsa Land’s progress demands the inclusion of the principals of the lasting regional development in its development strategy. Within this framework, the importance of studying and analyzing the touristic activity’s evolution can be noted. The need of acknowledging the fluctuations registered by the results of the touristic activity deployment allowed the approach of the issue related to the correlation stage between the existing accommodation capacity and the number of tourists arrived in the accommodation structures of Suceava County during the 2000-2006 period. The mutual involvement relationship, the existence, the direction, the form and the intensity of the connection between the two indicators are analyzed in this paper. The conclusions stated following the analysis of the obtained result, represent an upper step for filling in the image regarding the regional tourism activity in the conditions of the establishment and application of certain regional lasting development strategies.

Improvement of meat production capacity in reindeer farming

Directory of Open Access Journals (Sweden)

C. J. Petersson

1990-09-01

Full Text Available The poster describes the main activities in a joint Swedish-Norwegian research project. The ultimate purpose is to develope tools for individual production control and flock management in domestic reindeer production.

Repurposing Existing Material for Performance Support.

Science.gov (United States)

Harvey, Francis A.; Nelson, Adam

1995-01-01

Presents an overview of performance support systems (PSS), describes their role in promoting productivity in agile organizations, and discusses issues related to developing effective performance support using existing orientation, training, or procedural manuals. Topics include strategic principles of agility, and adding value when incorporating…

Required storage capacity to increase the value of renewable energy

International Nuclear Information System (INIS)

Nacht, T.

2014-01-01

The effort to achieve a more eco - friendly production of energy leads to larger shares of renewables in the electricity sector, resulting in more supply - dependency and volatility. This results in a time shift between production and consumption. In order to gain an upper hand, possibilities for transferring renewable energies from the time of production to the time when the demand occurs are researched. Energy storage systems will play a big role in this process, with pumped storage plants being the most developed and most common technology nowadays. As a first part of this thesis, the renewables in Germany are studied through the use of models on the basis of hourly measured values of the primary energy carriers for the corresponding technology. For these data series many years’ worth of measurements were considered, resulting in data for the hourly production values of the renewable energy sources. The results show a strong dependency between production and the seasons of the year. Furthermore a very small secured contribution of renewable production during times of peak load is registered, leading to the conclusion that energy storages are indeed necessary. Different strategies for the dispatch of the storage technologies pumped hydro storage, compressed air storage and hydrogen storage are developed for the region of Germany, which will be dispatched outside the energy - only market. The different strategies for the storage dispatch have the reduction of the resulting load in common, by preferably transferring renewable energy from times when it is not needed to those times with high loads. This resulting load needs to be covered by thermal power plants. The required capacities of the different storage technologies are evaluated and compared. By using pumped storage plants the increase in the value of renewables, as measured by the secure contribution during peak load hours, is determined. An analysis of different compositions of renewable production allows

Outage capacity of multicarrier systems

KAUST Repository

Yilmaz, Ferkan; Alouini, Mohamed-Slim

2010-01-01

The probability density function and the cumulative distribution function of the product of shifted Gamma variates are obtained in terms of the generalized Fox's H function. Using these new results, the exact outage capacity of multi carrier transmission through a slow Nakagami-m fading channel is presented. Moreover, it is shown that analytical and simulation results are in perfect agreement. © 2009 IEEE.

Tri-Laboratory Linux Capacity Cluster 2007 SOW

Energy Technology Data Exchange (ETDEWEB)

Seager, M

2007-03-22

). However, given the growing need for 'capability' systems as well, the budget demands are extreme and new, more cost effective ways of fielding these systems must be developed. This Tri-Laboratory Linux Capacity Cluster (TLCC) procurement represents the ASC first investment vehicle in these capacity systems. It also represents a new strategy for quickly building, fielding and integrating many Linux clusters of various sizes into classified and unclassified production service through a concept of Scalable Units (SU). The programmatic objective is to dramatically reduce the overall Total Cost of Ownership (TCO) of these 'capacity' systems relative to the best practices in Linux Cluster deployments today. This objective only makes sense in the context of these systems quickly becoming very robust and useful production clusters under the crushing load that will be inflicted on them by the ASC and SSP scientific simulation capacity workload.

Tri-Laboratory Linux Capacity Cluster 2007 SOW

International Nuclear Information System (INIS)

Seager, M.

2007-01-01

well, the budget demands are extreme and new, more cost effective ways of fielding these systems must be developed. This Tri-Laboratory Linux Capacity Cluster (TLCC) procurement represents the ASC first investment vehicle in these capacity systems. It also represents a new strategy for quickly building, fielding and integrating many Linux clusters of various sizes into classified and unclassified production service through a concept of Scalable Units (SU). The programmatic objective is to dramatically reduce the overall Total Cost of Ownership (TCO) of these 'capacity' systems relative to the best practices in Linux Cluster deployments today. This objective only makes sense in the context of these systems quickly becoming very robust and useful production clusters under the crushing load that will be inflicted on them by the ASC and SSP scientific simulation capacity workload.

Energy system, electricity market and economic studies on increasing nuclear power capacity

International Nuclear Information System (INIS)

Forsstrom, J.; Pursiheimo, E.; Kekkonen, V.; Honkatukia, J.

2010-04-01

Objective of this research project is to examine effects of addition of nuclear capacity from three different angles by using energy system, electricity market and economic analysis. In each area the analysis is based on computational methods. Finland is a member of Nordic electricity market which is further connected to networks of Continental Europe and Russia. Due to the foreign connections Finland has been able to import inexpensive electricity from its neighboring countries and this state is expected to continue. Addition of nuclear capacity lowers electricity import demand, affects level of electricity price decreasingly and decreases shortfall of installed production capacity. Substantial additions of nuclear power capacity and generous import supply have disadvantageous effect on profitability of combined heat and power production. The development of import possibilities depends on progression of difficult-to-estimate balance between electricity consumption and production in the neighboring countries. Investments on nuclear power increase national product during the construction phase. Growth of employment is also rather significant, especially during the construction phase. In the long term permanent jobs will be created too. Increase of employment is held back by increasing real wages, but it is though evident that consumer purchasing power is improved due to these nuclear power developments. (orig.)

Mode change design for capacity modulation in reciprocating compressor

International Nuclear Information System (INIS)

Bae, Young Ju; Kim, Jin Kook; Kim, Jong Bong; Chang, Young June

2008-01-01

Due to environmental issues, the development of low energy consumption products has become one of the main topics in the home appliance industry. The energy consumption of a refrigerator depends on the efficiency of its compressor as well as on the refrigerator cycle design, such as the capacity modulation. This study features the design of a novel capacity modulation reciprocating compressor, i.e., two-step capacity modulation (TCM). In a TCM compressor, capacity modulation is achieved by changing the dead volume in the cylinder. Instead of a concentric sleeve, an eccentric sleeve is used to change the dead volume for the clockwise and counterclockwise rotation of a motor. For stable capacity modulation, a new latching system with a key, a spring, and an eccentric sleeve is introduced, and the mode change reliability is verified by dynamic analysis

Introduction of the EISA-PC into existing fusion experiments

International Nuclear Information System (INIS)

Tenten, W.; Bertschinger, G.; Mueller, K.D.; Reinhart, P.; Rongen, F.

1995-01-01

A general problem in the data acquisition field in fusion research is the lack of sufficient local memory for the storage of information acquired during a single discharge. While it is absolutely necessary to keep these data locally before transferring them to a central node, there has been a steadily increasing demand for more capacity. The introduction of an EISA-Personal-Computer with its vast and cheap memory resources is presenting a very interesting solution for the upgrade of existing installations and the design of new experiments. An innovative PC interface using Programmable Logic techniques was developed that allows easy and fast integration of a PC into an existing experimental setup. Several typical applications of this method are presented, that are of special interest for fusion experiments. (orig.)

Capacity mechanisms: EU or National Issue? Are capacity remuneration mechanisms helping to build the market or just a symptom of what does not work?

International Nuclear Information System (INIS)

Parmigiani, Laura

2012-10-01

In a competitive energy system, generation investment choices are let to investors. It is then the responsibility of the market actors to invest and ensure peak, medium and base load generation, based on market perspectives and trends. If through actors' investments the stability of the system cannot be ensured (because, for example, peak generation is not sufficient to satisfy demand), some measures have to be taken. These can have economic and system integrity impacts on neighboring systems, especially if they are connected. This is precisely what is happening in the European electricity market. While the internal electricity market should be completed by 2014, the adoption by Member States of capacity remuneration mechanisms in an uncoordinated way may lead to new market distortions. Whereas national capacity remuneration mechanisms (CRMs) already exist in several European countries (e.g. Italy, Spain, Sweden), others have taken steps in the past months to implement CRMs (France, UK) or contemplated to introduce them (Germany). After the puzzle of more than 27 different regimes for incentivizing renewables, the same heterogeneity will appear in the capacity markets if no coherent and Europe-wide framework is proposed. While increased interconnections and market coupling will lead to more efficient and liquid markets at regional and EU levels, the opposite will happen if Member States adopt national solutions without looking beyond their borders. In order to understand why we have come this point, it is essential to start from the roots of the problem and to throw light on some false beliefs. It would be much easier to blame market liberalization and un-bundling or RES integration into the market. The truth is that both measures were important. Timing showed that the RES production is developing very fast and creates local over capacity in some national systems, while when there is no wind or sun, the conventional plants are still needed to supply the customers

Planning Annuaulised hours when spike in demand exists

Directory of Open Access Journals (Sweden)

MR Sureshkumar

2012-04-01

Full Text Available Manpower planning using annualised hours is an effective tool where seasonal demand for staff in industry exists. In annualised hours (AH workers are contracted to work for a certain number of hours per year. The workers are associated with relative efficiency for different types of tasks. This paper proposes a Mixed Integer linear Programming (MILP model to solve an annualised working hours planning problem when spike in demand exists. The holiday weeks for the workers are considered as partially individualised. If a worker has been assigned with more than one type of working week in a week, this will be compensated with one or more holiday week. The performance of the model is demonstrated with an example. It can be seen that this type of modelling helps to meet the spikes in demand with less capacity shortage compared with one working week in a week.

Steam separator uprating by elimination of capacity-limiting mechanisms

International Nuclear Information System (INIS)

Parkinson, J.R.; Pruster, W.P.; Kidwell, J.H.; Schneider, W.G.

1985-01-01

Advanced steam/water separation equipment for nuclear steam generator application is required for new equipment manufacture and also for retrofit. For new equipment applications, the desire for higher capacity is driven by competitiveness which requires maximum throughput in the most compact package. For retrofit applications, which have arisen due to the poor performance of some of the original equipment, the need is for high capacity separators which can fit into the existing pressure vessel envelope and not only correct the performance problem, but also allow for uprated plant output. This paper describes the development of such advanced steam separators

A Model for Strengthening Collaborative Research Capacity: Illustrations from the Atlanta Clinical Translational Science Institute

Science.gov (United States)

Rodgers, Kirsten C.; Akintobi, Tabia; Thompson, Winifred Wilkins; Evans, Donoria; Escoffery, Cam; Kegler, Michelle C.

2014-01-01

Introduction: Community-engaged research is effective in addressing health disparities but may present challenges for both academic institutions and community partners. Therefore, the need to build capacity for conducting collaborative research exists. The purpose of this study is to present a model for building research capacity in…

Capacity Market Design: Motivation and Challenges in Alberta’s Electricity Market

OpenAIRE

David Brown

2018-01-01

Alberta’s electricity market is currently undergoing a period of substantial transition. The province should proceed with caution as it switches from an energy-only electricity market to a capacity market by 2021. Many other jurisdictions have already made the changeover and Alberta can learn from their experiences in order to avoid common mistakes and pitfalls that can arise with the deployment of a capacity market.There were growing concerns that the existing electricity market structure wo...

Increased productivity in construction of civil and mining tunnels through the use of high-capacity tunnel-boring machines and continuous belt conveyor muck haulage

Energy Technology Data Exchange (ETDEWEB)

Beatty, J.G.; Ganey, R.J.; Killingsworth, J.E. [Perini Corp., Chicago, IL (United States). US Heavy Division

1994-12-31

The use of a large diameter high production tunnel boring machine interfaced with a high capacity continuous belt conveyor system provides a highly productive and cost effective construction system for both civil and mining tunnels. Continuous advance of the tunnel boring machine for a distance of 1,000 feet (305 m) allows for very efficient operation of the system. The available cost reductions will likely prove that this approach to waste handling will make marginally viable projects economically feasible. 9 refs., 10 figs., 1 tab.

Influence of wind farm capacity, turbine size and wind speed on production cost: analysis of the actual market trend

International Nuclear Information System (INIS)

Laali, A.-R.; Meyer, J.-L.

1996-01-01

Several studies are undertaken in R and D Division of EDF in collaboration with ERASME association in order to have a good knowledge of the wind energy production costs. These studies are performed in the framework of a wind energy monitoring project and concern the influence of a few parameters like wind farm capacity, turbine size and wind speed on production costs, through an analysis of the actual market trend. Some 50 manufacturers and 140 different kind of wind turbines are considered for this study. The minimum production cost is situated at 800/900 kW wind turbine rated power. This point will probably move to more important powers in the future. This study is valid only for average conditions and some special parameters like particular climate conditions or lack of infrastructure for a special site that could modify the results shown on the curves. The variety of wind turbines (rated power as a function of rotor diameter, height and specific rated power) in the actual market is analysed. A brief analysis of the market trend is also performed. (author)

Highly macroscopically degenerated single-point ground states as source of specific heat capacity anomalies in magnetic frustrated systems

Science.gov (United States)

Jurčišinová, E.; Jurčišin, M.

2018-04-01

Anomalies of the specific heat capacity are investigated in the framework of the exactly solvable antiferromagnetic spin- 1 / 2 Ising model in the external magnetic field on the geometrically frustrated tetrahedron recursive lattice. It is shown that the Schottky-type anomaly in the behavior of the specific heat capacity is related to the existence of unique highly macroscopically degenerated single-point ground states which are formed on the borders between neighboring plateau-like ground states. It is also shown that the very existence of these single-point ground states with large residual entropies predicts the appearance of another anomaly in the behavior of the specific heat capacity for low temperatures, namely, the field-induced double-peak structure, which exists, and should be observed experimentally, along with the Schottky-type anomaly in various frustrated magnetic system.

Negative plate macropore surfaces in lead-acid batteries: Porosity, Brunauer-Emmett-Teller area, and capacity

Energy Technology Data Exchange (ETDEWEB)

D' Alkaine, C.V.; de O. Brito, G.A. [Group of Electrochemistry and Polymers, DQ-UFSCar, Rodovia Washington Luis, Km 235, CP 676, 13565-905 Sao Carlos (SP) (Brazil)

2009-06-01

We propose an explanation for the production of an electrochemically active area during the electrochemical formation of lead-acid battery negative plates based on solid-state reactions. Our proposal is supported by experimental data. This study includes a critical review of the literature on charge/discharge mechanisms, porosity, and BET area. The critical review, through the latter two parameters, indicates the existence of both macro and micropores in positive plates, but only macropores in negative plates, with characteristic surface roughness. In the present paper the surface sulfation of the precursor is controlled using various acidic, neutral and alkaline solutions during an electrochemical formation process that does not include soaking. Our results confirm that variable roughness can be produced at the negative plate macropore surfaces. The morphological changes produced by different formation conditions are assessed by measuring the macroporosity, BET area, and capacity of single negative plates. Based on these concepts, a method was developed and applied to measure independently the contributions of geometrical surface macroporosity and roughness to the negative plate capacity. (author)

Reserve seismic capacity determination of a nuclear power plant braced frame with piping

International Nuclear Information System (INIS)

Nelson, T.A.

1979-01-01

The Lawrence Livermore Laboratory has been asked by the U.S. Nuclear Regulatory Commission to investigate the inelastic behavior of a representative non-category I structure to determine the amount of reserve seismic capacity that is available beyond elastic design levels. This reserve capacity can be an important consideration when evaluating the ability of existing structures to withstand upgraded seismic hazards. (orig.)

Carrying capacity of U.S. agricultural land: Ten diet scenarios

Directory of Open Access Journals (Sweden)

Christian J. Peters

2016-07-01

Full Text Available Abstract Strategies for environmental sustainability and global food security must account for dietary change. Using a biophysical simulation model we calculated human carrying capacity under ten diet scenarios. The scenarios included two reference diets based on actual consumption and eight “Healthy Diet” scenarios that complied with nutritional recommendations but varied in the level of meat content. We considered the U.S. agricultural land base and accounted for losses, processing conversions, livestock feed needs, suitability of land for crops or grazing, and land productivity. Annual per capita land requirements ranged from 0.13 to 1.08 ha person-1 year-1 across the ten diet scenarios. Carrying capacity varied from 402 to 807 million persons; 1.3 to 2.6 times the 2010 U.S. population. Carrying capacity was generally higher for scenarios with less meat and highest for the lacto-vegetarian diet. However, the carrying capacity of the vegan diet was lower than two of the healthy omnivore diet scenarios. Sensitivity analysis showed that carrying capacity estimates were highly influenced by starting assumptions about the proportion of cropland available for cultivated cropping. Population level dietary change can contribute substantially to meeting future food needs, though ongoing agricultural research and sustainable management practices are still needed to assure sufficient production levels.

US refining capacity for Canadian heavy oil : current overview and future potential

International Nuclear Information System (INIS)

Paget, S.

2006-01-01

This presentation provided an overview of the Canadian oil sands industry and investigated the potential heavy oil refining capacity of the United States. An outline of the first commercial developments of steam assisted gravity drainage (SAGD) in Alberta's oil sands was provided. Canada's reserves were compared with oil shale and heavy oil reserves in the United States and Venezuela. Influences of Canadian developments from western Canadian conventional crude oil were reviewed, and an oil sands production forecast was provided. Recent refining developments in the United States include delayed coking; catalytic cracking; fluid coking; flexicoking; and LC-fining. However, many oil sand producers are now choosing to upgrade oil, and producers are currently saturating United States markets with heavy crude oil. Canadian crude prices reached $90 per barrel in 2006. Heavy oil pipelines are now being constructed and existing heavy oil pipelines are being expanded. ConocoPhillips is planning to invest $1 billion for a new heavy oil coker, while BP is investing $3 billion for a heavy oil refinery in Indiana which plans to refine Canadian crude oil supplies. However, bitumens from Alberta are volatile in price, and excess Canadian production must be exported. Less than 10 per cent of western Canadian crude has tidewater access, and capital providers are concerned about cost over-runs. In order for the Canadian oil sands industry to succeed, refining capacity in the United States must be expanded, and open access must be provided to the Gulf coast as well as to the Pacific Ocean. tabs., figs

Capacity Payments in Restructured Markets under Low and High Penetration Levels of Renewable Energy

Energy Technology Data Exchange (ETDEWEB)

Jenkin, Thomas [National Renewable Energy Lab. (NREL), Golden, CO (United States); Beiter, Philipp [National Renewable Energy Lab. (NREL), Golden, CO (United States); Margolis, Robert [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-02-11

There is considerable debate about the degree to which restructured markets perform successfully in their use of capacity markets. In providing appropriate incentives for new and existing generation to meet reliability requirements, a variety of capacity market designs have developed across RTOs and ISOs in the United States and internationally. Growing levels of variable renewable energy (VRE) resources arguably create new challenges for capacity market designs, because VREs suppress energy prices while providing relatively little capacity, with these effects increase with VRE penetration. The purpose of this report is threefold. First, we provide a brief outline of the purpose and design of various capacity markets under consideration using variable resource requirement (VRR) demand curves. Second, we discuss some of the main challenges raised in existing literature and a set of interviews that we conducted with market participants, regulators, and observers, including where there substantive differences in opinion. Third, we consider some of the challenges that may be specific to higher penetration levels of VRE. While the well known 'merit order' effect from VRE can be expected to suppress wholesale energy prices and revenue, this may be partly mitigated by increased capacity payments and the greater importance of AS payments for flexible capacity. The potential for greater reliance on capacity markets for generator revenues may amplify any inefficiency and costs associated with capacity price volatility and other suboptimal market design choices. Regulatory intervention to ensure adequate capacity payments and ancillary service revenue may become more prevalent under current market designs as the timescale for market signals shifts increasingly from near term (e.g., day-ahead in wholesale electricity markets) to longer term (annual intervals in capacity markets). Our review and discussion with market participants suggest substantive challenges may

Institutional capacity for health systems research in East and Central African schools of public health: experiences with a capacity assessment tool.

Science.gov (United States)

Jessani, Nasreen; Lewy, Daniela; Ekirapa-Kiracho, Elizabeth; Bennett, Sara

2014-06-02

Despite significant investments in health systems research (HSR) capacity development, there is a dearth of information regarding how to assess HSR capacity. An alliance of schools of public health (SPHs) in East and Central Africa developed a tool for the self-assessment of HSR capacity with the aim of producing institutional capacity development plans. Between June and November 2011, seven SPHs across the Democratic Republic of Congo, Ethiopia, Kenya, Rwanda, Tanzania, and Uganda implemented this co-created tool. The objectives of the institutional assessments were to assess existing capacities for HSR and to develop capacity development plans to address prioritized gaps. A mixed-method approach was employed consisting of document analysis, self-assessment questionnaires, in-depth interviews, and institutional dialogues aimed at capturing individual perceptions of institutional leadership, collective HSR skills, knowledge translation, and faculty incentives to engage in HSR. Implementation strategies for the capacity assessment varied across the SPHs. This paper reports findings from semi-structured interviews with focal persons from each SPH, to reflect on the process used at each SPH to execute the institutional assessments as well as the perceived strengths and weaknesses of the assessment process. The assessment tool was robust enough to be utilized in its entirety across all seven SPHs resulting in a thorough HSR capacity assessment and a capacity development plan for each SPH. Successful implementation of the capacity assessment exercises depended on four factors: (i) support from senior leadership and collaborators, (ii) a common understanding of HSR, (iii) adequate human and financial resources for the exercise, and (iv) availability of data. Methods of extracting information from the results of the assessments, however, were tailored to the unique objectives of each SPH. This institutional HSR capacity assessment tool and the process for its utilization

Optimizing the Capacity and Operation of U.S. Army Ammunition Production Facilities

National Research Council Canada - National Science Library

Bayram, Vedat

2002-01-01

.... The Army must also manage and maintain capacity to replenish ammunition consumed by major theater wars without expanding the industrial base, The combined organic and inorganic industrial base...

Evolving production network structures

DEFF Research Database (Denmark)

Grunow, Martin; Gunther, H.O.; Burdenik, H.

2007-01-01

When deciding about future production network configurations, the current structures have to be taken into account. Further, core issues such as the maturity of the products and the capacity requirements for test runs and ramp-ups must be incorporated. Our approach is based on optimization...... modelling and assigns products and capacity expansions to production sites under the above constraints. It also considers the production complexity at the individual sites and the flexibility of the network. Our implementation results for a large manufacturing network reveal substantial possible cost...

Outage capacity of multicarrier systems

KAUST Repository

Yilmaz, Ferkan

2010-01-01

The probability density function and the cumulative distribution function of the product of shifted Gamma variates are obtained in terms of the generalized Fox\\'s H function. Using these new results, the exact outage capacity of multi carrier transmission through a slow Nakagami-m fading channel is presented. Moreover, it is shown that analytical and simulation results are in perfect agreement. © 2009 IEEE.

Applying linear programming model to aggregate production planning of coated peanut products

Science.gov (United States)

Rohmah, W. G.; Purwaningsih, I.; Santoso, EF S. M.

2018-03-01

The aim of this study was to set the overall production level for each grade of coated peanut product to meet market demands with a minimum production cost. The linear programming model was applied in this study. The proposed model was used to minimize the total production cost based on the limited demand of coated peanuts. The demand values applied to the method was previously forecasted using time series method and production capacity aimed to plan the aggregate production for the next 6 month period. The results indicated that the production planning using the proposed model has resulted a better fitted pattern to the customer demands compared to that of the company policy. The production capacity of product family A, B, and C was relatively stable for the first 3 months of the planning periods, then began to fluctuate over the next 3 months. While, the production capacity of product family D and E was fluctuated over the 6-month planning periods, with the values in the range of 10,864 - 32,580 kg and 255 – 5,069 kg, respectively. The total production cost for all products was 27.06% lower than the production cost calculated using the company’s policy-based method.

Capacity Payments in Restructured Markets under Low and High Penetration Levels of Renewable Energy

Energy Technology Data Exchange (ETDEWEB)

Thomas Jenkin, Philipp Beiter, and Robert Margolis

2016-02-01

Growing levels of variable renewable energy resources arguably create new challenges for capacity market designs, because variable renewable energy suppresses wholesale energy prices while providing relatively little capacity. This effect becomes more pronounced the higher the variable renewable energy penetration in a market. The purpose of this report is threefold. First, we provide a brief outline of the purpose and design of various capacity markets using administratively determined capacity demand curves. Second, we discuss some of the main challenges raised in existing literature and a set of interviews that we conducted with market participants, regulators, and observers. Third, we consider some of the challenges to capacity markets that arise with higher variable renewable energy penetration.

Studies on capacity management for factories of nuclear fuel for research reactors

International Nuclear Information System (INIS)

Negro, Miguel Luiz Miotto; Durazzo, Michelangelo; Mesquita, Marco Aurélio de; Carvalho, Elita Fontenele Urano de; Andrade, Delvonei Alves de; Universidade de São Paulo

2017-01-01

The use and the power of nuclear reactors for research and materials testing is increasing worldwide. That implies the demand for nuclear fuel for this kind of reactors is rising. Thus, the production facilities of this kind of fuel need reliable guidance on how to augment their production in order to meet the increasing demand efficiently, safely and keeping good quality. Focus is given to factories that produce plate type fuel elements loaded with LEU U_3Si_2-Al fuel, which are typically used in nuclear research reactors. Of the various production routes for this kind of fuel, we chose the route which uses hydrolysis of uranium hexafluoride. Raising the capacity of this kind of plants faces several problems, especially regarding safety against nuclear criticality. Some of these problems are briefly addressed. The new issue of the paper is the application of knowledge from the area of production administration to the fabrication of nuclear fuel for research reactors. A specific method for the increase in production capacity is proposed. That method was tested by means of discrete event simulation. The data were collected from the nuclear fuel factory at IPEN. The results indicated the proposed method achieved its goal as well as ways of raising production capacity in up to 50%. (author). (author)

Study on Space Audit Assessment Criteria for Public Higher Education Institution in Malaysia: Space Capacity Assessment

Directory of Open Access Journals (Sweden)

Wan Hamdan Wan Samsul Zamani

2016-01-01

Full Text Available The aim of this study is to measure the capacity rate of learning space based on the as-built drawing provided by the institutions or if the as-built drawing is missing, the researcher have to prepare measured drawing as per actual on site. The learning space Capacity Index is developed by analyzing the space design in as-built drawing or measured drawing and the list of learning spaces available at the institution. The Capacity Index is classified according to the level of Usable Floor Area (UFA and Occupancy Load (OL according to learning space design capacity. The classification of Capacity Index is demonstrated through linguistic value and the color-coded key. From the said index, the institution can easily identify whether the existing learning space is currently best used or vice versa and standard space planning compliance in Malaysia Public Higher Education Institutions. The data will assist the management to clarify whether to maximize the use of existing space or to request for new learning space.

Antioxidant capacity and physical exercise

Directory of Open Access Journals (Sweden)

A Marciniak

2009-09-01

Full Text Available The aim of this article is a presentation of current knowledge regarding the changes of plasma antioxidant capacity observed in response to physical exercise. Human body created the enzymatic and non-enzymatic systems, which play a protective role in the harmful impact of free radicals. Those two systems constitute what is known as the plasma total antioxidant capacity. The amount of reactive oxygen species (ROS and reactive nitrogen species (NOS in combination with oxidation processes increases in some tissues during physiological response to physical exercise. These changes are observed after single bout of exercise as well as after regular training. The response of human body to physical exercise can be analysed using various models of exercise test. Application of repeated type of exhaustion allows for characterizing the ability of human body to adjust to the increased energy loss and increased oxygen consumption. This article presents the characteristics of components of plasma antioxidant capacity, the mechanisms of free radicals production and their role in human body. It discusses also the currently used methods of detecting changes in total antioxidant capacity and its individual elements in response to single bout of exercise and regular training. It presents the review of literature about research performed in groups of both regularly training and low exercise activity individuals as well as in group of healthy subjects and patients with circulation diseases.

Electron thermal capacity in plasma generated at cavitation bubble collapse in D-acetone

International Nuclear Information System (INIS)

Kostenko, B.F.; Pribis, J.

2004-01-01

The latest experimental data on nuclear reaction product registration at cavitation bubble collapse in deuterated acetone (C 3 D 6 O) still argue in favour of existence of a new possibility to realize the thermonuclear synthesis. Theoretical description based on numerical solution of simultaneous conservation equations for gaseous and liquid phases also confirms this possibility, although it requires further more precise definitions. In particular, description of electron degrees of freedom in dense nonequilibrium plasma generated at the final stage of bubble collapse need specification. Calculations of electron thermal capacity in the deuterated acetone multiple ionization region at electron temperatures T e ≅ 10 4 K and above and compression range ρ/ρ 0 ≅ 1 - 100 have been fulfilled on the basis of direct numerical solution of equation for chemical potential. (author)

Acid-producing capacity from sugars and sugar alcohols among Lactobacillus isolates collected in connection with radiation therapy.

Science.gov (United States)

Almståhl, Annica; Rudbäck, Helena; Basic, Amina; Carlén, Anette; Alstad, Torgny

2017-12-01

To investigate the acid-producing capacity from sugars and sugar alcohols of oral Lactobacillus collected in connection with radiation therapy (RT) to the head and neck region. Lactobacillus were collected from the tongue, buccal mucosa and supragingival plaque in 24 patients before, during, and after RT. The acid-producing capacity of Lactobacillus isolates (n=211) was analyzed using a colorimetric fermentation test in microtiter plates. Solutions containing 2% sugars (sucrose, glucose, fructose, lactose) or sugar-alcohols (sorbitol and xylitol) were used. After 24h of incubation, bacterial acid-producing capacity was determined as strong (pH6). Data regarding intake frequency of sugar-rich products and products with sugar-alcohols was collected. The highest acid-producing capacity using the sugars was seen for isolates collected during RT. Sorbitol was fermented to a higher extent during and post RT, especially among isolates from plaque. Lactobacillus fermenting xylitol showed the highest acid-producing capacity during RT (psugar-rich products or sugar-alcohol containing products and Lactobacillus acid-producing capacity, were found. The results suggest that Lactobacillus isolates, collected from the tongue, buccal mucosa and supragingival plaque, have a higher acid-producing capacity using sugars and sugar-alcohols during RT than one year post RT. Copyright © 2017 Elsevier Ltd. All rights reserved.

A interdependência entre sistemas de controle de produção e critérios de alocação de capacidades The relationship between production planning and control systems and methods of capacity allocation

Directory of Open Access Journals (Sweden)

Fernando Bernardi de Souza

2002-08-01

Full Text Available Há uma aparente carência de pesquisas sobre os inter-relacionamentos entre critérios de alocação de capacidades de recursos de manufatura e os métodos de controle de produção. Estudos sobre alocação de capacidades se baseiam geralmente em sistemas simplificados de empurrar a produção, desconsiderando sistemas mais atuais de gestão de produção. Por outro lado, pesquisas sobre a aplicabilidade de sistemas de gestão da produção não consideram apropriada a maneira como as capacidades produtivas dos recursos estão alocadas ao longo da linha. Analisar as interdependências entre esses dois grandes ramos de pesquisa é o objetivo deste artigo.There is a lack of researches on the relationship between methods of capacity allocation of manufacturing resources and production planning and control systems. Studies about capacity allocation are based on simplified push production systems not considering more current production management systems. By other side, studies about efficiency of production management systems don't consider the effect of different criteria of capacity allocation of manufacturing resources at the results. The purpose of this paper is to investigate how the different policies of capacity allocation and different production planning and control systems interrelate between each other.

Huge natural gas reserves central to capacity work, construction plans in Iran

International Nuclear Information System (INIS)

Anon.

1994-01-01

Questions about oil production capacity in Iran tend to mask the country's huge potential as a producer of natural gas. Iran is second only to Russia in gas reserves, which National Iranian Gas Co. estimates at 20.7 trillion cu m. Among hurdles to Iran's making greater use of its rich endowment of natural gas are where and how to sell gas not used inside the country. The marketing logistics problem is common to other Middle East holders of gas reserves and a reason behind the recent proliferation of proposals for pipeline and liquefied natural gas schemes targeting Europe and India. But Iran's challenges are greater than most in the region. Political uncertainties and Islamic rules complicate long-term financing of transportation projects and raise questions about security of supply. As a result, Iran has remained mostly in the background of discussions about international trade of Middle Eastern gas. The country's huge gas reserves, strategic location, and existing transport infrastructure nevertheless give it the potential to be a major gas trader if the other issues can be resolved. The paper discusses oil capacity plans, gas development, gas injection for enhanced oil recovery, proposals for exports of gas, and gas pipeline plans

Development of a Process for a High Capacity Arc Heater Production of Silicon for Solar Arrays

Science.gov (United States)

Reed, W. H.

1979-01-01

A program was established to develop a high temperature silicon production process using existing electric arc heater technology. Silicon tetrachloride and a reductant (sodium) are injected into an arc heated mixture of hydrogen and argon. Under these high temperature conditions, a very rapid reaction is expected to occur and proceed essentially to completion, yielding silicon and gaseous sodium chloride. Techniques for high temperature separation and collection were developed. Included in this report are: test system preparation; testing; injection techniques; kinetics; reaction demonstration; conclusions; and the project status.

Problem in application carrying capacity approach for land allocation assessment in Indonesian municipal spatial planning: A case of Kutai Kartanegara Regency

Science.gov (United States)

Wijaya, I. N. S.; Rahadi, B.; Lusiana, N.; Maulidina, I.

2017-06-01

Urbanization in many countries, such as Indonesia, is commonly appeared as a dynamic population of developed areas. It is followed with reducing rural uses of land for improving urban land uses such as housing, industry, infrastructure, etc. in response to the growth of population. One may not be sufficiently considered by the urban planners and the decision makers, urbanization also means escalation of natural resources consumption that should be supported by the natural capacity of the area. In this situation, balancing approach as carrying capacity calculation in spatial planning is needed for sustainability. Indonesian Spatial Planning Law 26/2007 has already expressed about the balance approach in the system. Moreover, it strictly regulates the assessment and the permission system in controlling land development, especially for the conversion. However, the reductions over the rural uses of land, especially agriculture, are continuously occurred. Concerning the planning approach, this paper aims to disclose common insufficiency of carrying capacity considerations in Indonesian spatial planning practice. This paper describes common calculation weaknesses in projecting area for the urban development by recalculating the actual gap between supply and demand of agriculture land areas. Here, municipal spatial plan of Kutai Kartanegara Regency is utilized as single sample case to discuss. As the result, the recalculation shows that: 1) there are serious deficit status of agriculture land areas in order to fulfil the demanded agriculture production for the existed population, 2) some calculation of agriculture production may be miss-interpreted because of insufficient explanation toward the productivity of each agriculture commodity.

Longitudinal changes in functional capacity: effects of socio-economic position among ageing adults

Directory of Open Access Journals (Sweden)

Sulander Tommi

2012-12-01

Full Text Available Abstract Introduction Health and functional capacity have improved especially in Western countries over the past few decades. Nevertheless, the positive secular trend has not been able to decrease an uneven distribution of health. The main aim of this study was to follow-up changes in functional capacity among the same people in six years time and to detect whether the possible changes vary according to socio-economic position (SEP. In addition, it is of interest whether health behaviours have an effect on these possible changes. Methods This longitudinal follow-up study consisted of 1,898 individuals from three birth cohorts (1926–1930, 1936–40, 1946–50 who took part in clinical check-ups and answered to a survey questionnaire in 2002 and 2008. A sub-scale of physical functioning from the RAND-36 was used to measure functional capacity. Education and adequacy of income were used as indicators of socio-economic position. Repeated-measures ANOVA was used as a main method of analysis. Results Physical functioning in 2002 and 2008 was poorest among those men and women belonging to the oldest cohort. Functional capacity deteriorated in six years among men in the oldest cohort and among women in all three cohorts. Socio-economic disparities in functional capacity among ageing people existed. Especially lower adequacy of income was most consistently associated with poorer functional capacity. However, changes in functional capacity by socio-economic position remained the same or even narrowed independent of health behaviours. Conclusion Socio-economic disparities in physical functioning are mainly incorporated in the level of functioning at the baseline. No widening socioeconomic disparities in functional capacity exist. Partly these disparities even seem to narrow with ageing.

Biofilm formation capacity of Salmonella serotypes at different temperature conditions

Directory of Open Access Journals (Sweden)

Karen A. Borges

Full Text Available ABSTRACT: Salmonella spp. are one of the most important agents of foodborne disease in several countries, including Brazil. Poultry-derived products are the most common food products, including meat and eggs, involved in outbreaks of human salmonellosis. Salmonella has the capacity to form biofilms on both biotic and abiotic surfaces. The biofilm formation process depends on an interaction among bacterial cells, the attachment surface and environmental conditions. These structures favor bacterial survival in hostile environments, such as slaughterhouses and food processing plants. Biofilms are also a major problem for public health because breakage of these structures can cause the release of pathogenic microorganisms and, consequently, product contamination. The aim of this study was to determine the biofilm production capacity of Salmonella serotypes at four different temperatures of incubation. Salmonella strains belonging to 11 different serotypes, isolated from poultry or from food involved in salmonellosis outbreaks, were selected for this study. Biofilm formation was investigated under different temperature conditions (37°, 28°, 12° and 3°C using a microtiter plate assay. The tested temperatures are important for the Salmonella life cycle and to the poultry-products process. A total of 92.2% of the analyzed strains were able to produce biofilm on at least one of the tested temperatures. In the testing, 71.6% of the strains produced biofilm at 37°C, 63% at 28°C, 52.3% at 12°C and 39.5% at 3°C, regardless of the serotype. The results indicate that there is a strong influence of temperature on biofilm production, especially for some serotypes, such as S. Enteritidis, S. Hadar and S. Heidelberg. The production of these structures is partially associated with serotype. There were also significant differences within strains of the same serotype, indicating that biofilm production capacity may be strain-dependent.

Visual attention capacity: a review of TVA-based patient studies.

Science.gov (United States)

Habekost, Thomas; Starrfelt, Randi

2009-02-01

Psychophysical studies have identified two distinct limitations of visual attention capacity: processing speed and apprehension span. Using a simple test, these cognitive factors can be analyzed by Bundesen's Theory of Visual Attention (TVA). The method has strong specificity and sensitivity, and measurements are highly reliable. As the method is theoretically founded, it also has high validity. TVA-based assessment has recently been used to investigate a broad range of neuropsychological and neurological conditions. We present the method, including the experimental paradigm and practical guidelines to patient testing, and review existing TVA-based patient studies organized by lesion anatomy. Lesions in three anatomical regions affect visual capacity: The parietal lobes, frontal cortex and basal ganglia, and extrastriate cortex. Visual capacity thus depends on large, bilaterally distributed anatomical networks that include several regions outside the visual system. The two visual capacity parameters are functionally separable, but seem to rely on largely overlapping brain areas.

Carrying capacity: the tradition and policy implications of limits

Directory of Open Access Journals (Sweden)

Virginia Deane Abernethy

2001-01-01

Full Text Available ABSTRACT: Within just the last few centuries, science and technology have enlarged human capabilities and population size until humans now take, for their own use, nearly half of the Earth's net terrestrial primary production. An ethical perspective suggests that potentials to alter, or further increase, humanity's use of global resources should be scrutinized through the lenses of self-interested foresightedness and respect for non-human life. Without overtly invoking ethics, studies of the carrying capacity achieve just this objective. Carrying capacity is an ecological concept that expresses the relationship between a population and the natural environment on which it depends for ongoing sustenance. Carrying capacity assumes limits on the number of individuals that can be supported at a given level of consumption without degrading the environment and, therefore, reducing future carrying capacity. That is, carrying capacity addresses long-term sustainability. Worldviews differ in the importance accorded to the carrying capacity concept. This paper addresses three worldviews - ecological, romantic, and entrepreneurial - and explores the ethics and the policy implications of their contrasting perspectives.

Inhibition of existing denitrification enzyme activity by chloramphenicol

Science.gov (United States)

Brooks, M.H.; Smith, R.L.; Macalady, D.L.

1992-01-01

Chloramphenicol completely inhibited the activity of existing denitrification enzymes in acetylene-block incubations with (i) sediments from a nitrate-contaminated aquifer and (ii) a continuous culture of denitrifying groundwater bacteria. Control flasks with no antibiotic produced significant amounts of nitrous oxide in the same time period. Amendment with chloramphenicol after nitrous oxide production had begun resulted in a significant decrease in the rate of nitrous oxide production. Chloramphenicol also decreased (>50%) the activity of existing denitrification enzymes in pure cultures of Pseudomonas denitrificans that were harvested during log- phase growth and maintained for 2 weeks in a starvation medium lacking electron donor. Short-term time courses of nitrate consumption and nitrous oxide production in the presence of acetylene with P. denitrificans undergoing carbon starvation were performed under optimal conditions designed to mimic denitrification enzyme activity assays used with soils. Time courses were linear for both chloramphenicol and control flasks, and rate estimates for the two treatments were significantly different at the 95% confidence level. Complete or partial inhibition of existing enzyme activity is not consistent with the current understanding of the mode of action of chloramphenicol or current practice, in which the compound is frequently employed to inhibit de novo protein synthesis during the course of microbial activity assays. The results of this study demonstrate that chloramphenicol amendment can inhibit the activity of existing denitrification enzymes and suggest that caution is needed in the design and interpretation of denitrification activity assays in which chloramphenicol is used to prevent new protein synthesis.

Capacity Ten-Seven

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-05-04

The study was initiated to assemble UK solar experts who would define the parameters for the design of solar cell process plant with a capacity of about 10MWp per annum and establish the optimum substrate size, cell configuration and junction structure and show that these characteristics are suited to high volume low cost production. The study focused on proven materials and techniques rather than on innovative materials and processes. Peak production should deliver panels at a cost of less than $1 per peak watt. The study was reported under the headings of fundamental studies, front contact deposition, semiconductor deposition, rear contact deposition, cell isolation and initial design study. Since much of the work is commercially sensitive, not all findings are divulged in the report. The work, which achieved all its targets, was carried out by ICP Solar Technologies UK Ltd under contract to the DTI.

Consumer appeal of nutrition and health claims in three existing product concepts.

Science.gov (United States)

Verbeke, Wim; Scholderer, Joachim; Lähteenmäki, Liisa

2009-06-01

This paper reports on consumers' reactions towards calcium-enriched fruit juice, omega-3 enriched spread and fibre-enriched cereals, each with a nutrition claim, health claim and reduction of disease risk claim. Cross-sectional data were collected in April 2006 from a sample of 341 consumers in Belgium. Consumers' reactions to the carrier product, functional ingredient and claim combinations were assessed as perceived convincingness of the claim, credibility of the product, attractiveness of the product, and intention to buy the product, while accounting for differences in product familiarity, attitudinal and demographic characteristics. Generally, health claims outperformed nutrition claims, and both of these claim types outperformed reduction of disease risk claims. Comparing consumer reactions across product concepts revealed clear preferences for fibre-enriched cereals as compared to the other two concepts. The interaction effects between claim type and product concept indicated that reduction of disease risk claims are perceived very well in omega-3 enriched spreads, particularly in terms of perceived convincingness of the claim, while not appealing to consumers in the other product concepts. Positive attitudes towards functional foods and familiarity with the concrete functional product category boosted the claim type and product ratings, whereas perceived control over own health and perceiving functional foods as a marketing scam decreased all product concept's appeal.

Study of solar electric production potential in Provence-Alpes-Cote d'Azur - Study synthesis

International Nuclear Information System (INIS)

2009-10-01

While mainly proposing tables, graphs and maps, this report proposes a synthesis of a study performed to assess the potential production of solar electric energy in the PACA region. It briefly presents stakes of solar electric power development in the PACA region, outlines its potential benefits, briefly comments an assessment of existing photovoltaic installations in 2008 with an indication of the evolution since 2007, proposes an analysis of the different stakes related to the development of ground-based and of roof-based installations, an assessment of roof-based potential production and of ground-based potential production, an assessment of connection capacities for this potential production, and an assessment of PACA potential production by 2030

Technological capacity as an element of development strategy

Energy Technology Data Exchange (ETDEWEB)

Weiss, C; Kamenetzky, M; Ramesh, J

1980-03-01

The idea that science and technology transfers would result in the development of indigenous infrastructures able to cope with social problems overlooked the costs and uncertainties of applying science and technology to modernizing industry. A local capacity to deal with development is not emerging in developing countries and the role of small-scale technology has been largely ignored. A technological capacity needs to be built from within the public and private sectors, with adequate financial and technical support for small production units and adequate sheltering for long-term problems. Public policies are needed which can assess the fitness of technological institutions and policies to develop a capacity for making technological decisions that are compatible with local supply. 12 references. (DCK)

TanZamBo Capacity Building for HIV Prevention Research Network ...

International Development Research Centre (IDRC) Digital Library (Canada)

This grant will support the development of HIV/AIDS prevention trial expertise in Botswana, Tanzania and Zambia using existing collaborations between Africa, Canada and the United States. The Botswana-Tanzania-Zambia Capacity Building Network (TanZamBo) is composed of two African institutions with fairly well ...

Aggregate Production Planning, Casestudy in a Medium-sized Industry of the Rubber Production Line in Ecuador.

Science.gov (United States)

Rosero-Mantilla, César; Sánchez-Sailema, Mayra; Sánchez-Rosero, Carlos; Galleguillos-Pozo, Rosa

2017-06-01

This research aims to improve the productivity in the rubber line of a medium-sized industry by increasing the production capacities through the use of the Aggregate Production Planning model. For this purpose an analysis of the production processes of the line was made and the aggregate plan was defined evaluating two strategies: Exact Production Plan (Zero Inventory) and Constant Workforce Plan (Vary Inventory) by studying the costs of both inventory maintenance and workforce. It was also determined how the installed capacity was used with the standards of the rubber line and measures for decreasing production costs were proposed. It was proven that only 70% of the plant capacity was being used so it could be possible to produce more units and to obtain a bigger market for the products of this line.+

A Synergy Cropland of China by Fusing Multiple Existing Maps and Statistics.

Science.gov (United States)

Lu, Miao; Wu, Wenbin; You, Liangzhi; Chen, Di; Zhang, Li; Yang, Peng; Tang, Huajun

2017-07-12

Accurate information on cropland extent is critical for scientific research and resource management. Several cropland products from remotely sensed datasets are available. Nevertheless, significant inconsistency exists among these products and the cropland areas estimated from these products differ considerably from statistics. In this study, we propose a hierarchical optimization synergy approach (HOSA) to develop a hybrid cropland map of China, circa 2010, by fusing five existing cropland products, i.e., GlobeLand30, Climate Change Initiative Land Cover (CCI-LC), GlobCover 2009, MODIS Collection 5 (MODIS C5), and MODIS Cropland, and sub-national statistics of cropland area. HOSA simplifies the widely used method of score assignment into two steps, including determination of optimal agreement level and identification of the best product combination. The accuracy assessment indicates that the synergy map has higher accuracy of spatial locations and better consistency with statistics than the five existing datasets individually. This suggests that the synergy approach can improve the accuracy of cropland mapping and enhance consistency with statistics.

农业生产与水资源承载力评价%Agricultural production and evaluation in terms of water resources carrying capacity

Institute of Scientific and Technical Information of China (English)

虞祎; 张晖; 胡浩

2016-01-01

negative effect of increasing planted area was larger than that of increasing livestock amount. When the planted area increased by 1.00%, water surplus decreased by 14.86 billion m3. Then when livestock increased equally by 1.00%, water surplus decreased only by 7.84 billion m3. The reason was that besides the amount of water needed for growing crops, the large quantity of grey water used to dilute excessive chemical fertilizer superposed its effect on water surplus. Given limited arable land resources, increasing planted area was only possible by reclamation of marginal lands and cropping index farming. Expanding the amount of livestock mainly relied on increasing breeding scale. The production of grain and meat had already met the goal of modern agricultural development plan in the “12th 5-year Programming”. Thus to better satisfy the needs of residents for food diversification, it was necessary to allocate more cotton, oilseeds, fruits and vegetables to plowed lands. The quantity of cow breeding also needed expansion. It was hard to build an optimistic view over the carrying capacity of the existing water resources. Production scales in Hebei, Shanxi, Jiangsu, Henan, Shandong and Ningxia provinces exceeded the upper limit of their water resources carrying capacity. Yangtze River Basin and South China had more room for expansion of agricultural production. It was critical that the choice of each province was reasonable and based on a realistic agricultural structure of comparative advantage. The implications for policy development were as follows: 1) guiding agricultural production transfer to areas with larger water resources carrying capacity; 2) when subjected to environmental constraints for agricultural growth, considering trade as an alternative to satisfying consumer demands; and 3) developing new environmental technologies in agricultural production and improving regional water resources carrying capacity. At the same time, there was need to realize inter

The Current State of Poison Control Centers in Pakistan and the Need for Capacity Building

Directory of Open Access Journals (Sweden)

Nadeem Khan

2014-03-01

Full Text Available Background: Chemical exposure is a major health problem globally. Poison control centers (PCCs play a leading role both in developed and developing countries in the prevention and control of poisonous chemical exposures. In this study, we aimed to assess the current state of PCCs in Pakistan and highlight capacity building needs in these centers. Methods: A cross-sectional survey of the two registered PCCs was done during August – December 2011. Necessary services of the PCCs were evaluated and the data were recorded on a predesigned checklist. Results: Both PCCs are affiliated to a tertiary care hospital. Clinical services to poisoned patients were available 24 hours a day / 7 days a week. Information on common local products was available to poison center staff. Both centers were involved in undergraduate and post graduate teaching. Telephone poison information service was not available in either of centers. There was a limited capacity for qualitative and analytical toxicology. Common antidotes were available. There were limited surveillance activities to capture toxic risks existing in the community and also a deficiency was observed in chemical disaster planning. Conclusion: PCCs in Pakistan need capacity building for specialized training in toxicology, toxicovigilance, chemical disaster planning, analytical laboratory tests and telephone service for consultation in poisoning cases.   How to cite this article: Khan NU, Mir MU, Khan UR, Khan AR, Ara J, Raja K, et al. The Current State of Poison Control Centers in Pakistan and the Need for Capacity Building. Asia Pac J Med Toxicol 2014;3:31-5.

UN OPEN GIS CAPACITY BUILDING

Directory of Open Access Journals (Sweden)

A. Albertella

2017-07-01

Full Text Available The UN Open GIS Initiative is to identify and develop, under UN guidance, an Open Source GIS bundle that meets the requirements of UN operations, taking full advantage of the expertise of mission partners (partner nations, technology contributing countries, international organizations, academia, NGO’s, private sector. The project, started in 2016, is composed by 4 working groups. One of the working group is specifically related to Capacity Building, given its importance for the success of the project. UN Open GIS will be based on some existing open source geospatial software (packages and libraries with many extensions specifically developed. The users of the platform will be the UN staff supporting with mapping and GIS the peacekeeping missions. Therefore, they are generally expert of this specific domain, even if they are currently using proprietary software. UN Open GIS Capacity Building is specifically thought for covering this gap, providing them the suitable background about open source geospatial software in general and the education tailored to the solution that has been being developed within the project itself.

Design, Explanation, and Evaluation of Training Model Structures Based on Learning Organization--In the Cement Industry with a Nominal Production Capacity of Ten Thousand Tons

Science.gov (United States)

Rahimian, Hamid; Kazemi, Mojtaba; Abbspour, Abbas

2017-01-01

This research aims to determine the effectiveness of training based on learning organization in the staff of cement industry with production capacity over ten thousand tons. The purpose of this study is to propose a training model based on learning organization. For this purpose, the factors of organizational learning were introduced by…

Estimation of marginal costs at existing waste treatment facilities.

Science.gov (United States)

Martinez-Sanchez, Veronica; Hulgaard, Tore; Hindsgaul, Claus; Riber, Christian; Kamuk, Bettina; Astrup, Thomas F

2016-04-01

This investigation aims at providing an improved basis for assessing economic consequences of alternative Solid Waste Management (SWM) strategies for existing waste facilities. A bottom-up methodology was developed to determine marginal costs in existing facilities due to changes in the SWM system, based on the determination of average costs in such waste facilities as function of key facility and waste compositional parameters. The applicability of the method was demonstrated through a case study including two existing Waste-to-Energy (WtE) facilities, one with co-generation of heat and power (CHP) and another with only power generation (Power), affected by diversion strategies of five waste fractions (fibres, plastic, metals, organics and glass), named "target fractions". The study assumed three possible responses to waste diversion in the WtE facilities: (i) biomass was added to maintain a constant thermal load, (ii) Refused-Derived-Fuel (RDF) was included to maintain a constant thermal load, or (iii) no reaction occurred resulting in a reduced waste throughput without full utilization of the facility capacity. Results demonstrated that marginal costs of diversion from WtE were up to eleven times larger than average costs and dependent on the response in the WtE plant. Marginal cost of diversion were between 39 and 287 € Mg(-1) target fraction when biomass was added in a CHP (from 34 to 303 € Mg(-1) target fraction in the only Power case), between -2 and 300 € Mg(-1) target fraction when RDF was added in a CHP (from -2 to 294 € Mg(-1) target fraction in the only Power case) and between 40 and 303 € Mg(-1) target fraction when no reaction happened in a CHP (from 35 to 296 € Mg(-1) target fraction in the only Power case). Although average costs at WtE facilities were highly influenced by energy selling prices, marginal costs were not (provided a response was initiated at the WtE to keep constant the utilized thermal capacity). Failing to systematically

Capacity credit of wind power in the Netherlands

International Nuclear Information System (INIS)

Wijk, A.J.M. van; Turkenburg, W.C.

1993-01-01

The Dutch Government has stated that by the year 2000 a total amount of 1000 MW wind power should be installed in the Netherlands. The penetration of wind power into the electricity supply system poses questions about the costs and benefits of wind power. One of the parameters affecting the benefits is the amount of conventional capacity that can be saved by wind power, the so-called 'capacity credit'. In this study the capacity credit of wind power in the Netherlands is analysed. The capacity credit is calculated using a probabilistic method which evaluates the loss of load expectation (LOLE) of the total electricity generating system. In these evaluations the available wind power is treated as 'negative load'. The capacity credit is evaluated with respect to the Dutch electricity generating system and the electricity demand that is projected for the year 2000 by the Dutch utilities. Special attention is given to modelling the hourly wind power production. The model incorporates detailed siting information, wind speed data for several meteorological stations and the power curves of five different types of wind turbines. The average amount of electricity produced by wind power can be expressed by the capacity factor. For the set of assumptions and for the meteorological conditions for the years investigated the capacity factor has a value of 22%. 30 refs, 10 figs, 3 tabs

Total water production capacity inversion phenomenon in multi-stage direct contact membrane distillation: A theoretical study

KAUST Repository

Lee, Jung Gil

2017-09-09

The low thermal efficiency and low water production are among the major challenges that prevent membrane distillation (MD) process from being commercialized. In an effort to design an efficient multi-stage direct contact MD (DCMD) unit through mathematical simulation, a new phenomenon that we refer to as total water production capacity inversion (WPI) has been detected. It is represented by a decrease in the total water production beyond a number of stages or a certain module length. WPI phenomenon, which was confirmed by using two different mathematical models validated experimentally, was found to take place due to the decrease in water vapor flux across the membrane as well as the increase in heat loss by conduction as the membrane length increases. Therefore, WPI should be considered as a critical MD design-criterion, especially for large scale units. Investigations conducted for a simulated multi-stage DCMD process showed that inlet feed and permeate temperatures difference, feed and permeate flow rates, and feed salinity have different effects on WPI. The number of stages (or module length at constant width) that leads to a maximum water production has been determined for different operating parameters. Decreasing inlet feed and permeate temperatures difference, or inlet feed and permeate flow rates and increasing inlet feed temperature at constant temperature difference or inlet feed salinity cause the WPI to take place at lower number of stages. Even though the feed salinity affects negligibly the mean permeate flux, it was clearly shown that it can affect WPI. The results presented herein unveil a hidden phenomenon that is likely to occur during process scale-up procedures and should be considered by process engineers for a proper choice of system design and operating conditions.

Capacity building to improve the Malaysian inspection and monitoring systems for aquaculture and fisheries products

NARCIS (Netherlands)

Berendsen, B.; Wegh, R.S.; Zaaijer, S.; Dijk, van J.P.; Gevers, G.J.M.

2013-01-01

This report describes the content, the approach used and lessons learned during the implementation of a capacity development programme to build the analytical capacity of laboratory staff of the Department of Fisheries (DoF) and the Ministry of Health (MoH) who are directly involved in the analysis

Affective bias in visual working memory is associated with capacity.

Science.gov (United States)

Xie, Weizhen; Li, Huanhuan; Ying, Xiangyu; Zhu, Shiyou; Fu, Rong; Zou, Yingmin; Cui, Yanyan

2017-11-01

How does the affective nature of task stimuli modulate working memory (WM)? This study investigates whether WM maintains emotional information in a biased manner to meet the motivational principle of approaching positivity and avoiding negativity by retaining more approach-related positive content over avoidance-related negative content. This bias may exist regardless of individual differences in WM functionality, as indexed by WM capacity (overall bias hypothesis). Alternatively, this bias may be contingent on WM capacity (capacity-based hypothesis), in which a better WM system may be more likely to reveal an adaptive bias. In two experiments, participants performed change localisation tasks with emotional and non-emotional stimuli to estimate the number of items that they could retain for each of those stimuli. Although participants did not seem to remember one type of emotional content (e.g. happy faces) better than the other type of emotional content (e.g. sad faces), there was a significant correlation between WM capacity and affective bias. Specifically, participants with higher WM capacity for non-emotional stimuli (colours or line-drawing symbols) tended to maintain more happy faces over sad faces. These findings demonstrated the presence of a "built-in" affective bias in WM as a function of its systematic limitations, favouring the capacity-based hypothesis.

Evaluation of the Potential for the Production of Lignocellulosic Based Ethanol at Existing Corn Ethanol Facilities: Final Subcontract Report, 2 March 2000 - 30 March 2002

Energy Technology Data Exchange (ETDEWEB)

2002-07-01

Subcontract report on opportunities to explore the business potential provided by converting biomass to products such as ethanol. The goals of this study were: (1) To provide the opportunity to explore the business potential provided by converting biomass to products such as ethanol. (2) To take advantage of the grain-processing infrastructure by investigating the co-location of additional biomass conversion facilities at an existing plant site.

Linking Transformational Leadership, Absorptive Capacity, and Corporate Entrepreneurship

Directory of Open Access Journals (Sweden)

Imran Shafique

2018-03-01

Full Text Available This study aims to analyze the nexus between transformational leadership and corporate entrepreneurship through an integration of dispersed scholarly work on transformational leadership, absorptive capacity, and corporate entrepreneurship under one framework. A survey method was employed for the collection of data from small and medium-sized enterprises (SMEs of Pakistan. The data were analyzed using structural equation modeling (SEM technique to empirically test the hypotheses. The results demonstrate that transformational leadership positively affects corporate entrepreneurship and its dimensions—namely, innovation, new business venturing, self-renewal, proactivity, and risk-taking—both directly and through absorptive capacity. The potential of transformational leadership to influence corporate entrepreneurship via absorptive capacity added additional interesting substitutes. Future studies may produce novel insights by examining different leadership styles, settings, or utilizing qualitative technique. Firms should invest to initiate transformational leadership training programs for their managers. Additionally, if these firms are aiming to promote corporate entrepreneurship, they should focus on hiring managers that have attributes of transformational leadership. Furthermore, they should also invest in absorptive capacity to utilize outside knowledge for the enhancement of entrepreneurial activities. This study exploits research work on the relationship between transformational leadership and corporate entrepreneurship in a novel way; it investigates the dimensions of entrepreneurship individually, as well as unidimensionally, and includes the mediating role of absorptive capacity and tests several other hypotheses that previously have been ignored. This study, compared to the existing research, contributes to the impact of transformational leadership on corporate entrepreneurship and absorptive capacity, especially in Pakistan�

Modification of an existing radwaste facility to provide onsite low level waste storage

International Nuclear Information System (INIS)

Ault, G.M.; Reiss, J.F.; Commonwealth Edison Co., Chicago, IL)

1985-01-01

The decision of whether or not to install onsite storage capacity for low-level radioactive waste is dictated by individual utility circumstances. Commonwealth Edison has decided to construct facilities to store low-level radwaste onsite at each of their four operating nuclear stations, and they plan to have those facilities in operation by January, 1986. At Dresden, that onsite storage capacity is being provided by modifying an existing radwaste building which already has installed a remotely-operated precision-placement type crane. The purposes of this paper are to describe: (1) how Commonwealth Edison arrived at the decision to construct onsite storage facilities as a hedge against possible disruption of burial site availability in January, 1986; (2) why the desire to minimize the capital investment for this protection led to selection of an uncomplicated design for their ''standard'' facility and to the decision to modify an existing building at Dresden rather than construct a new one; and (3) what is being done to adapt the Dresden 1 Decontamination/Radwaste Building for extended onsite storage

Building capacity for public and population health research in Africa: the consortium for advanced research training in Africa (CARTA) model

Science.gov (United States)

Ezeh, Alex C.; Izugbara, Chimaraoke O.; Kabiru, Caroline W.; Fonn, Sharon; Kahn, Kathleen; Manderson, Lenore; Undieh, Ashiwel S.; Omigbodun, Akinyinka; Thorogood, Margaret

2010-01-01

Background Globally, sub-Saharan Africa bears the greatest burden of disease. Strengthened research capacity to understand the social determinants of health among different African populations is key to addressing the drivers of poor health and developing interventions to improve health outcomes and health systems in the region. Yet, the continent clearly lacks centers of research excellence that can generate a strong evidence base to address the region's socio-economic and health problems. Objective and program overview We describe the recently launched Consortium for Advanced Research Training in Africa (CARTA), which brings together a network of nine academic and four research institutions from West, East, Central, and Southern Africa, and select northern universities and training institutes. CARTA's program of activities comprises two primary, interrelated, and mutually reinforcing objectives: to strengthen research infrastructure and capacity at African universities; and to support doctoral training through the creation of a collaborative doctoral training program in population and public health. The ultimate goal of CARTA is to build local research capacity to understand the determinants of population health and effectively intervene to improve health outcomes and health systems. Conclusions CARTA's focus on the local production of networked and high-skilled researchers committed to working in sub-Saharan Africa, and on the concomitant increase in local research and training capacity of African universities and research institutes addresses the inability of existing programs to create a critical mass of well-trained and networked researchers across the continent. The initiative's goal of strengthening human resources and university-wide systems critical to the success and sustainability of research productivity in public and population health will rejuvenate institutional teaching, research, and administrative systems. PMID:21085517

Building capacity for public and population health research in Africa: the consortium for advanced research training in Africa (CARTA model

Directory of Open Access Journals (Sweden)

Alex C. Ezeh

2010-11-01

Full Text Available Background: Globally, sub-Saharan Africa bears the greatest burden of disease. Strengthened research capacity to understand the social determinants of health among different African populations is key to addressing the drivers of poor health and developing interventions to improve health outcomes and health systems in the region. Yet, the continent clearly lacks centers of research excellence that can generate a strong evidence base to address the region's socio-economic and health problems. Objective and program overview: We describe the recently launched Consortium for Advanced Research Training in Africa (CARTA, which brings together a network of nine academic and four research institutions from West, East, Central, and Southern Africa, and select northern universities and training institutes. CARTA's program of activities comprises two primary, interrelated, and mutually reinforcing objectives: to strengthen research infrastructure and capacity at African universities; and to support doctoral training through the creation of a collaborative doctoral training program in population and public health. The ultimate goal of CARTA is to build local research capacity to understand the determinants of population health and effectively intervene to improve health outcomes and health systems. Conclusions: CARTA's focus on the local production of networked and high-skilled researchers committed to working in sub-Saharan Africa, and on the concomitant increase in local research and training capacity of African universities and research institutes addresses the inability of existing programs to create a critical mass of well-trained and networked researchers across the continent. The initiative's goal of strengthening human resources and university-wide systems critical to the success and sustainability of research productivity in public and population health will rejuvenate institutional teaching, research, and administrative systems.

Capacity Utilization in European Railways

DEFF Research Database (Denmark)

Khadem Sameni, Melody; Landex, Alex

2013-01-01

and unprecedented approach for this aim. Relative operational efficiency of 24 European railways in capacity utilization is studied for the first time by data envelopment analysis (DEA). It deviates from previous applications of DEA in the railway industry that are conducted to analyze cost efficiency of railways....... Six DEA models quantify various aspects of micro, macro and quality of railway capacity utilization in these countries. New inputs like gross domestic product, population and area of the country help to provide a better picture of the status of railways. Passenger satisfaction data about different...... aspects of railway services in European countries has recently been quantified by European commission and are used for the first time in the literature. Invaluable insights can be inferred from the results which can provide a ground basis for railway practitioners and policy makers....

A review of existing renewable energy facilities in Canada

International Nuclear Information System (INIS)

Nyboer, J.; Pape-Salmon, A.

2003-05-01

This first annual report on renewable energy in the Canadian electricity sector includes records from 629 power plants across Canada. Renewable energy sources include wind, hydroelectricity, wood residue biomass, landfill/sewage gas, solar photovoltaic, municipal solid waste, and tidal energy. The data in this report was acquired from Statistics Canada and other public information sources. For each of the 629 renewable energy power plants, this report states its type of renewable energy, the province, the name of the project, its location, its operator, electrical generating capacity, number of generating units, average annual electricity production, and the year it began operation. The majority (64 per cent) of Canada's total installed power capacity comes from renewable energy sources, with the dominant source being hydroelectricity. Manitoba has the highest portion of renewable energy at almost 98 per cent of its installed electrical capacity. Nearly half of Canada's renewable power capacity is in Quebec, followed by 18 per cent in British Columbia. Nova Scotia has Canada's only tidal power plant. Approximately 80 per cent of the total installed renewable energy power capacity in Canada is owned by integrated electric utilities. Eleven per cent is owned by renewable electricity generating companies, 5 per cent is owned by aluminium companies, and 3 per cent is owned by pulp and paper companies. The rest is owned by diversified electricity generators. It is expected that with the ratification of the Kyoto Protocol interest in renewable energy will grow. 6 refs., 3 tabs., 2 figs., 1 appendix

Capacity enhancement and flexible operation of unified power quality conditioner in smart and microgrid network

Directory of Open Access Journals (Sweden)

Shafiuzzaman Khan Khadem

2018-01-01

Full Text Available This paper presents a new approach to design Unified Power Quality Conditioner (UPQC, termed as distributed UPQC (D-UPQC, for smart or microgrid network where capacity enhancement and flexible operation of UPQC are the important issues. This paper shows the possibility of capacity enhancement and operational flexibility of UPQC through a coordinated control of existing resources. This UPQC consists of a single unit series active power filter (APFse and multiple shunt APF (APFsh units in a distributed (parallel mode. These units can be connected with a common/separate dc linked capacitor(s. The requirement of capacity enhancement arises from the flexibility to cope up with the increased harmonic load demand at low voltage (LV distribution network. This can be accomplished by a coordinated control where multiple APFsh units are operated by utilizing the capacity of APFse while it is in idle/low mode using. Operational flexibility can be accomplished by compensating (i the reactive and harmonic current individually or (ii splitting the combined reactive and harmonic current/power among the APFsh units. Design and control issues have been discussed to identify the capacity enhancement limit with the possibility of operational flexibility. A system then has been simulated in MATLAB to show the effectiveness of D-UPQC in capacity enhancement and flexible operation by applying its existing resource utilization capability.

Studies on capacity management for factories of nuclear fuel for research reactors

Energy Technology Data Exchange (ETDEWEB)

Negro, Miguel Luiz Miotto; Durazzo, Michelangelo; Mesquita, Marco Aurélio de; Carvalho, Elita Fontenele Urano de; Andrade, Delvonei Alves de, E-mail: mlnegro@ipen.br, E-mail: mdurazzo@ipen.br, E-mail: elitaucf@ipen.br, E-mail: delvonei@ipen.br, E-mail: mamesqui@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Universidade de São Paulo (USP), SP (Brazil). Escola Politécnica. Departamento de Engenharia de Produção

2017-11-01

The use and the power of nuclear reactors for research and materials testing is increasing worldwide. That implies the demand for nuclear fuel for this kind of reactors is rising. Thus, the production facilities of this kind of fuel need reliable guidance on how to augment their production in order to meet the increasing demand efficiently, safely and keeping good quality. Focus is given to factories that produce plate type fuel elements loaded with LEU U{sub 3}Si{sub 2}-Al fuel, which are typically used in nuclear research reactors. Of the various production routes for this kind of fuel, we chose the route which uses hydrolysis of uranium hexafluoride. Raising the capacity of this kind of plants faces several problems, especially regarding safety against nuclear criticality. Some of these problems are briefly addressed. The new issue of the paper is the application of knowledge from the area of production administration to the fabrication of nuclear fuel for research reactors. A specific method for the increase in production capacity is proposed. That method was tested by means of discrete event simulation. The data were collected from the nuclear fuel factory at IPEN. The results indicated the proposed method achieved its goal as well as ways of raising production capacity in up to 50%. (author). (author)

Attachment-inducing capacities of fish skin epithelial extracts on oncomiracidia of Benedenia seriolae (Monogenea: Capsalidae).

Science.gov (United States)

Yoshinaga, Tomoyoshi; Nagakura, Tatsuhiro; Ogawa, Kazuo; Fukuda, Yutaka; Wakabayashi, Hisatsugu

2002-03-01

Attachment-inducing capacities of skin epithelial extracts of yellowtail, Japanese flounder and red sea bream on oncomiracidia of the monogenean Benedenia seriolae were examined. Clear differences were not detected in the capacity among the fish species, although B. seriolae infects only yellowtail and its congeners in Seriola. This suggests that either the capacity is not host specific or host-specific attachment-inducing capacity cannot be detected by the assay method. Further, the attachment-inducing capacities were suppressed by wheat-germ lectin and concanavalin A in skin epithelial extracts of Japanese flounder and yellowtail, respectively. This suggests that some sugar-related chemical substances existing in fish epithelia induce the attachment of B. seriolae oncomiracidia.

Production and economic characteristics of sheep production on the island of Pag

Directory of Open Access Journals (Sweden)

Marina Krvavica

2012-03-01

Full Text Available The aim of the research was to learn from a survey about the production and economic characteristics of sheep production as well as economic position and developmental orientation of sheep breeders on the island of Pag. Data on production and economic characteristics of sheep production on the island of Pag were collected from a survey and processed through relevant descriptive statistics methods. The respondents have on average 47 breeding sheep, 2 rams and 9 sheep intended for flock renewal rate (not older than one year; which means an average flock has 58 sheep. The average total income from sheep production in 2009 was 72,460.10 HRK. The average total production costs in 2009 were 13,260.10 HRK, including the costs of fodder and veterinary services. All farms achieved positive financial results of 59,199.90 HRK in average. As many as three quarters of respondents indicated profitability of sheep production as the main motivation to engage in sheep production; very few indicated that heritage and inability to do other jobs were the main motivation. Important limiting factors for future development of sheep breeding on the island of Pag in most farms are lack of potential heirs and high average age of farm holders. Regarding the effects of joining the European Union, half the breeders intend to improve their production and harmonise it with the EU requirements and standards; one quarter of them intend to keep the existing production capacity; and another quarter intend to quit with production.

Comparison of the new Japanese legislation for expedited approval of regenerative medicine products with the existing systems in the USA and European Union.

Science.gov (United States)

Jokura, Yoji; Yano, Kazuo; Yamato, Masayuki

2018-02-01

Legislation for expedited-approval pathways and programmes for drugs, biologics or medical devices has been enacted for rapid commercialization of innovative products in the United States of America (USA) and the European Union (EU). However, less innovative products are increasingly benefitting from these expedited-approval pathways, and obligations to collect and report post-marketing data on approved products are being bypassed frequently. The Japanese government recently enacted legislation for a new conditional and time-limited approval pathway dedicated to regenerative medicine products. The current study examines this new legislation and compares it with existing US and EU regulatory frameworks, with a particular focus on how it addresses the limitations of existing systems. Regulations, guidance documents and approval information were gathered from the websites of the respective authorities in the USA, the EU and Japan, and the systems were categorized through qualitative analysis. The pathways and programmes from each region were categorized into four groups, based on the requirement of pre- or post-marketing clinical data. Expedited-approval pathways in the USA and the EU provide similar qualification criteria, such as severity of target disease; however, such criteria are not specified for the new pathway in Japan. Only the Japanese pathway stipulates a time limitation on exceptional approval, requiring post-marketing study for conditional and time-limited products. Continuous improvement is necessary to solve previously addressed issues within the expedited-approval pathways and programmes and to ensure that innovative medical products are rigourously screened, but also readily available to patients in need. The time limitation of conditional approval could be a potential solution to some of these problems. Copyright © 2017 The Authors. Tissue Engineering Regenerative Medicine published by John Wiley & Sons, Ltd. Copyright © 2017 The Authors. Tissue

STUDY REGARDING THE OPERATING SPEED OF FORAGE HARVESTING MACHINERY IN ORDER TO OPTIMIZE THE WORKING CAPACITY AND FUEL CONSUME

Directory of Open Access Journals (Sweden)

V. MOISE

2007-10-01

Full Text Available The efficiency of forage production machinery system is partially reflected in someclassical economical indices, because the real efficiency of mechanical tillageutilization at forage harvesting and preparation must be reflected in the foragequality increasing and feed superior valorization by the farm livestock. An area of7.8 alfalfa ha was harvested with U-650M tractor and ROTO 165 rotary mower andwith U-650M tractor and Zakaz rotary mower at different speeds in field work.Average values of the speed in parcel work, work effective capacity, work capacityduring shift, specific work capacity on cutter width, fuel consume per land unit, andspecific fuel consume per mass unit were determined for each speed in field work.Power matching between the tractor and the mower do not always meet therequirements when forming harvesting mechanized systems. Classical mowers withcommon cutting units do not sufficiently load the U-650M tractor existing inmany Romanian farms, which determines an unfavorable functioning regime ofthe tractor engine correlated with increased fuel consumes.

Characterization of a chromatographic column for the production of 90Sr

International Nuclear Information System (INIS)

Fornaciari Iljadica, Maria C.; Furnari, Juan C.; Cohen, Isaac M.

2003-01-01

The experiments carried out with the objective of developing a method for 90 Sr production, associated to that of 99 Mo from 235 U fission, which is routinely performed at Centro Atomico Ezeiza, Comision Nacional de Energia Atomica, are described. The project consists of strontium separation from a nitric solution containing uranium and a variety of fission products, by retention and subsequent elution in selective chromatographic columns. Both these columns and the conditions for their use in a routine production process have been characterized. The experiments show good Sr-Ba separation, high concentration of activity for the obtained 90 Sr, and minimal losses; in addition, the non-existence of significant radiation damage, as a limiting factor of the separative capacity of the columns, has been verified. (author)

Investment, managerial capacity, and bias in public health preparedness.

Science.gov (United States)

Langabeer, James R; DelliFraine, Jami L; Tyson, Sandra; Emert, Jamie M; Herbold, John

2009-01-01

Nearly $7 billion has been invested through national cooperative funding since 2002 to strengthen state and local response capacity. Yet, very little outcome evidence exists to analyze funding effectiveness. The objective of this research is to analyze the relationship between investment (funding) and capacity (readiness) for public health preparedness (PHP). The aim of the authors is to use a management framework to evaluate capacity, and to explore the "immediacy bias" impact on investment stability. This study employs a longitudinal study design, incorporating survey research of the entire population of 68 health departments in the state of Texas. The authors assessed the investment-capacity relationship through several statistical methods. The authors created a structural measure of managerial capacity through principal components analysis, factorizing 10 independent variables and augment this with a perceived readiness level reported from PHP managers. The authors then employ analysis of variance, correlation analyses, and other descriptive statistics. There has been a 539 percent coefficient of variation in funding at the local level between the years 2004 and 2008, and a 63 percent reduction in total resources since the peak of funding, using paired sample data. Results suggest that investment is positively associated with readiness and managerial capacity in local health departments. The authors also find that investment was related to greater community collaboration, higher adoption of Incident Command System (ICS) structure, and more frequent operational drills and exercises. Greater investment is associated with higher levels of capacity and readiness. The authors conclude from this that investment should be stabilized and continued, and not be influenced by historical cognitive biases.

World Energy Balance Outlook and OPEC Production Capacity: Implications for Global Oil Security

Directory of Open Access Journals (Sweden)

Azadeh M. Rouhani

2012-07-01

Full Text Available The imbalance between energy resource availability, demand, and production capacity, coupled with inherent economic and environmental uncertainties make strategic energy resources planning, management, and decision-making a challenging process. In this paper, a descriptive approach has been taken to synthesize the world’s energy portfolio and the global energy balance outlook in order to provide insights into the role of Organization of Petroleum Exporting Countries (OPEC in maintaining “stability” and “balance” of the world’s energy market. This synthesis illustrates that in the absence of stringent policies, i.e., if historical trends of the global energy production and consumption hold into the future, it is unlikely that non-conventional liquid fuels and renewable energy sources will play a dominant role in meeting global energy demand by 2030. This should be a source of major global concern as the world may be unprepared for an ultimate shift to other energy sources when the imminent peak oil production is reached. OPEC’s potential to impact the supply and price of oil could enable this organization to act as a facilitator or a barrier for energy transition policies, and to play a key role in the global energy security through cooperative or non-cooperative strategies. It is argued that, as the global energy portfolio becomes more balanced in the long run, OPEC may change its typical high oil price strategies to drive the market prices to lower equilibria, making alternative energy sources less competitive. Alternatively, OPEC can contribute to a cooperative portfolio management approach to help mitigate the gradually emerging energy crisis and global warming, facilitating a less turbulent energy transition path while there is time.

Higher Education and Capacity Building in Africa

DEFF Research Database (Denmark)

? Universities and their scientific knowledges are often seen to have universal qualities; therefore, capacity building may appear straightforward. Higher Education and Capacity Building in Africa contests such universalistic notions. Inspired by ideas about the ‘geography of scientific knowledge’ it explores...... what role specific places and relationships have in knowledge production, and analyses how cultural experiences are included and excluded in teaching and research. Thus, the different chapters show how what constitutes legitimate scientific knowledge is negotiated and contested. In doing so...... is a valuable resource for researchers and postgraduate students in education, development studies, African studies and human geography, as well as anthropology and history....

Human skeletal muscle mitochondrial capacity.

Science.gov (United States)

Rasmussen, U F; Rasmussen, H N

2000-04-01

Under aerobic work, the oxygen consumption and major ATP production occur in the mitochondria and it is therefore a relevant question whether the in vivo rates can be accounted for by mitochondrial capacities measured in vitro. Mitochondria were isolated from human quadriceps muscle biopsies in yields of approximately 45%. The tissue content of total creatine, mitochondrial protein and different cytochromes was estimated. A number of activities were measured in functional assays of the mitochondria: pyruvate, ketoglutarate, glutamate and succinate dehydrogenases, palmitoyl-carnitine respiration, cytochrome oxidase, the respiratory chain and the ATP synthesis. The activities involved in carbohydrate oxidation could account for in vivo oxygen uptakes of 15-16 mmol O2 min-1 kg-1 or slightly above the value measured at maximal work rates in the knee-extensor model of Saltin and co-workers, i.e. without limitation from the cardiac output. This probably indicates that the maximal oxygen consumption of the muscle is limited by the mitochondrial capacities. The in vitro activities of fatty acid oxidation corresponded to only 39% of those of carbohydrate oxidation. The maximal rate of free energy production from aerobic metabolism of glycogen was calculated from the mitochondrial activities and estimates of the DeltaG or ATP hydrolysis and the efficiency of the actin-myosin reaction. The resultant value was 20 W kg-1 or approximately 70% of the maximal in vivo work rates of which 10-20% probably are sustained by the anaerobic ATP production. The lack of aerobic in vitro ATP synthesis might reflect termination of some critical interplay between cytoplasm and mitochondria.

Pseudomonas pseudoalcaligenes CECT5344, a cyanide-degrading bacterium with by-product (polyhydroxyalkanoates) formation capacity.

Science.gov (United States)

Manso Cobos, Isabel; Ibáñez García, María Isabel; de la Peña Moreno, Fernando; Sáez Melero, Lara Paloma; Luque-Almagro, Víctor Manuel; Castillo Rodríguez, Francisco; Roldán Ruiz, María Dolores; Prieto Jiménez, María Auxiliadora; Moreno Vivián, Conrado

2015-06-10

Cyanide is one of the most toxic chemicals produced by anthropogenic activities like mining and jewelry industries, which generate wastewater residues with high concentrations of this compound. Pseudomonas pseudoalcaligenes CECT5344 is a model microorganism to be used in detoxification of industrial wastewaters containing not only free cyanide (CN(-)) but also cyano-derivatives, such as cyanate, nitriles and metal-cyanide complexes. Previous in silico analyses suggested the existence of genes putatively involved in metabolism of short chain length (scl-) and medium chain length (mcl-) polyhydroxyalkanoates (PHAs) located in three different clusters in the genome of this bacterium. PHAs are polyesters considered as an alternative of petroleum-based plastics. Strategies to optimize the bioremediation process in terms of reducing the cost of the production medium are required. In this work, a biological treatment of the jewelry industry cyanide-rich wastewater coupled to PHAs production as by-product has been considered. The functionality of the pha genes from P. pseudoalcaligenes CECT5344 has been demonstrated. Mutant strains defective in each proposed PHA synthases coding genes (Mpha(-), deleted in putative mcl-PHA synthases; Spha(-), deleted in the putative scl-PHA synthase) were generated. The accumulation and monomer composition of scl- or mcl-PHAs in wild type and mutant strains were confirmed by gas chromatography-mass spectrometry (GC-MS). The production of PHAs as by-product while degrading cyanide from the jewelry industry wastewater was analyzed in batch reactor in each strain. The wild type and the mutant strains grew at similar rates when using octanoate as the carbon source and cyanide as the sole nitrogen source. When cyanide was depleted from the medium, both scl-PHAs and mcl-PHAs were detected in the wild-type strain, whereas scl-PHAs or mcl-PHAs were accumulated in Mpha(-) and Spha(-), respectively. The scl-PHAs were identified as homopolymers of 3

Capacity Planning for Batch and Perfusion Bioprocesses Across Multiple Biopharmaceutical Facilities

OpenAIRE

Siganporia, Cyrus C; Ghosh, Soumitra; Daszkowski, Thomas; Papageorgiou, Lazaros G; Farid, Suzanne S

2014-01-01

Production planning for biopharmaceutical portfolios becomes more complex when products switch between fed-batch and continuous perfusion culture processes. This article describes the development of a discrete-time mixed integer linear programming (MILP) model to optimize capacity plans for multiple biopharmaceutical products, with either batch or perfusion bioprocesses, across multiple facilities to meet quarterly demands. The model comprised specific features to account for products with fe...

Forecast Mekong 2012: Building scientific capacity

Science.gov (United States)

Stefanov, James E.

2012-01-01

In 2009, U.S. Secretary of State Hillary R. Clinton joined the Foreign Ministers of Cambodia, Laos, Thailand, and Vietnam in launching the Lower Mekong Initiative to enhance U.S. engagement with the countries of the Lower Mekong River Basin in the areas of environment, health, education, and infrastructure. The U.S. Geological Survey Forecast Mekong supports the Lower Mekong Initiative through a variety of activities. The principal objectives of Forecast Mekong include the following: * Build scientific capacity in the Lower Mekong Basin and promote cooperation and collaboration among scientists working in the region. * Provide data, information, and scientific models to help resource managers there make informed decisions. * Produce forecasting and visualization tools to support basin planning, including climate change adaptation. The focus of this product is Forecast Mekong accomplishments and current activities related to the development of scientific capacity at organizations and institutions in the region. Building on accomplishments in 2010 and 2011, Forecast Mekong continues to enhance scientific capacity in the Lower Mekong Basin with a suite of activities in 2012.

Electron Thermal Capacity in Plasma Generated at Cavitation Bubble Collapse in D-acetone

CERN Document Server

Kostenko, B F

2004-01-01

The latest experimental data on nuclear reaction product registration at cavitation bubble collapse in deuterated acetone (C$_3$D$_6$O) still argue in favour of existence of a new possibility to realize the thermonuclear synthesis. Theoretical description based on numerical solution of simultaneous conservation equations for gaseous and liquid phases also confirms this possibility, although it requires further more precise definitions. In particular, description of electron degrees of freedom in very dense nonequilibrium plasma generated at the final stage of bubble collapse needs specification. In the present paper, calculations of electron thermal capacity in the deuterated acetone multiple ionization region at electron temperatures $T_e \\simeq 10^4 $ K and above and compression range $\\rho/\\rho_0 \\simeq 1 \\div 100$ have been fulfilled on the basis of direct numerical solution of equation for chemical potential.

Consumer appeal of nutrition and health claims in three existing product concepts

DEFF Research Database (Denmark)

Verbeke, Wim; Scholderer, Joachim; Lähteenmäki, Liisa

2009-01-01

This paper reports on consumers' reactions towards calcium-enriched fruit juice, omega-3 enriched spread and fibre-enriched cereals, each with a nutrition claim, health claim and reduction of disease risk claim. Cross-sectional data were collected in April 2006 from a sample of 341 consumers...... in Belgium. Consumers' reactions to the carrier product, functional ingredient and claim combinations were assessed as perceived convincingness of the claim, credibility of the product, attractiveness of the product, and intention to buy the product, while accounting for differences in product familiarity......, attitudinal and demographic characteristics. Generally, health claims outperformed nutrition claims, and both of these claim types outperformed reduction of disease risk claims. Comparing consumer reactions across product concepts revealed clear preferences for fibre-enriched cereals as compared to the other...

U.S. Residential Miscellaneous Refrigeration Products: Results from Amazon Mechanical Turk Surveys

Energy Technology Data Exchange (ETDEWEB)

Greenblatt, Jeffery B.; Young, Scott J.; Yang, Hung-Chia; Long, Timothy; Beraki, Bereket; Price, Sarah K.; Pratt, Stacy; Willem, Henry; Desroches, Louis-Benoit

2013-11-14

Amazon Mechanical Turk was used, for the first time, to collect statistically representative survey data from U.S. households on the presence, number, type and usage of refrigerators, freezers, and various “miscellaneous” refrigeration products (wine/beverage coolers, residential icemakers and non-vapor compression refrigerators and freezers), along with household and demographic information. Such products have been poorly studied to date, with almost no information available about shipments, stocks, capacities, energy use, etc. A total of 9,981 clean survey responses were obtained from five distinct surveys deployed in 2012. General refrigeration product survey responses were weighted to demographics in the U.S. Energy Information Administration’s Residential Energy Consumption Survey 2009 dataset. Miscellaneous refrigeration product survey responses were weighted according to demographics of product ownership found in the general refrigeration product surveys. Model number matching for a portion of miscellaneous refrigeration product responses allowed validation of refrigeration product characteristics, which enabled more accurate estimates of the penetrations of these products in U.S. households. We estimated that there were 12.3±1.0 million wine/beverage coolers, 5.5(–3.5,+3.2) million residential icemakers and 4.4(–2.7,+2.3) million non-vapor compression refrigerators in U.S. households in 2012. (All numerical results are expressed with ranges indicating the 95% confidence interval.) No evidence was found for the existence of non-vapor compression freezers. Moreover, we found that 15% of wine/beverage coolers used vapor compression cooling technology, while 85% used thermoelectric cooling technology, with the vast majority of thermoelectric units having capacities of less than 30 wine bottles (approximately 3.5 cubic feet). No evidence was found for the existence of wine/beverage coolers with absorption cooling technology. Additionally, we estimated

U.S. Residential Miscellaneous Refrigeration Products: Results from Amazon Mechanical Turk Surveys

Energy Technology Data Exchange (ETDEWEB)

Greenblatt, Jeffery B. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Young, Scott J. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Yang, Hung-Chia [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Long, Timothy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Beraki, Bereket [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Price, Sarah K. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Pratt, Stacy [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Willem, Henry [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Desroches, Louis-Benoit [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2013-04-01

Amazon Mechanical Turk was used, for the first time, to collect statistically representative survey data from U.S. households on the presence, number, type and usage of refrigerators, freezers, and various “miscellaneous” refrigeration products (wine/beverage coolers, residential icemakers and non-vapor compression refrigerators and freezers), along with household and demographic information. Such products have been poorly studied to date, with almost no information available about shipments, stocks, capacities, energy use, etc. A total of 9,820 clean survey responses were obtained from four distinct surveys deployed in 2012. General refrigeration product survey responses were weighted to demographics in the U.S. Energy Information Administration’s Residential Energy Consumption Survey 2009 dataset. Miscellaneous refrigeration product survey responses were weighted according to demographics of product ownership found in the general refrigeration product surveys. Model number matching for a portion of miscellaneous refrigeration product responses allowed validation of refrigeration product characteristics, which enabled more accurate estimates of the penetrations of these products in U.S. households. We estimated that there were 12.3±1.0 million wine/beverage coolers, 5.5(–3.5,+3.2) million residential icemakers and 2.9(–2.5,+4.5) million non-vapor compression refrigerators in U.S. households in 2012. (All numerical results are expressed with ranges indicating the 95% confidence interval.) No evidence was found for the existence of non-vapor compression freezers. Moreover, we found that 15% of wine/beverage coolers used vapor compression cooling technology, while 85% used thermoelectric cooling technology, with the vast majority of thermoelectric units having capacities of less than 30 wine bottles (approximately 3.5 cubic feet). No evidence was found for the existence of wine/beverage coolers with absorption cooling technology. Additionally, we estimated

Development and Validation of a Kit to Measure Drink Antioxidant Capacity Using a Novel Colorimeter.

Science.gov (United States)

Priftis, Alexandros; Stagos, Dimitrios; Tzioumakis, Nikolaos; Konstantinopoulos, Konstantinos; Patouna, Anastasia; Papadopoulos, Georgios E; Tsatsakis, Aristides; Kouretas, Dimitrios

2016-08-30

Measuring the antioxidant capacity of foods is essential, as a means of quality control to ensure that the final product reaching the consumer will be of high standards. Despite the already existing assays with which the antioxidant activity is estimated, new, faster and low cost methods are always sought. Therefore, we have developed a novel colorimeter and combined it with a slightly modified DPPH assay, thus creating a kit that can assess the antioxidant capacity of liquids (e.g., different types of coffee, beer, wine, juices) in a quite fast and low cost manner. The accuracy of the colorimeter was ensured by comparing it to a fully validated Hitachi U-1900 spectrophotometer, and a coefficient was calculated to eliminate the observed differences. In addition, a new, user friendly software was developed, in order to render the procedure as easy as possible, while allowing a central monitoring of the obtained results. Overall, a novel kit was developed, with which the antioxidant activity of liquids can be measured, firstly to ensure their quality and secondly to assess the amount of antioxidants consumed with the respective food.

Development and Validation of a Kit to Measure Drink Antioxidant Capacity Using a Novel Colorimeter

Directory of Open Access Journals (Sweden)

Alexandros Priftis

2016-08-01

Full Text Available Measuring the antioxidant capacity of foods is essential, as a means of quality control to ensure that the final product reaching the consumer will be of high standards. Despite the already existing assays with which the antioxidant activity is estimated, new, faster and low cost methods are always sought. Therefore, we have developed a novel colorimeter and combined it with a slightly modified DPPH assay, thus creating a kit that can assess the antioxidant capacity of liquids (e.g., different types of coffee, beer, wine, juices in a quite fast and low cost manner. The accuracy of the colorimeter was ensured by comparing it to a fully validated Hitachi U-1900 spectrophotometer, and a coefficient was calculated to eliminate the observed differences. In addition, a new, user friendly software was developed, in order to render the procedure as easy as possible, while allowing a central monitoring of the obtained results. Overall, a novel kit was developed, with which the antioxidant activity of liquids can be measured, firstly to ensure their quality and secondly to assess the amount of antioxidants consumed with the respective food.

Model for Assembly Line Re-Balancing Considering Additional Capacity and Outsourcing to Face Demand Fluctuations

Science.gov (United States)

Samadhi, TMAA; Sumihartati, Atin

2016-02-01

The most critical stage in a garment industry is sewing process, because generally, it consists of a number of operations and a large number of sewing machines for each operation. Therefore, it requires a balancing method that can assign task to work station with balance workloads. Many studies on assembly line balancing assume a new assembly line, but in reality, due to demand fluctuation and demand increased a re-balancing is needed. To cope with those fluctuating demand changes, additional capacity can be carried out by investing in spare sewing machine and paying for sewing service through outsourcing. This study develops an assembly line balancing (ALB) model on existing line to cope with fluctuating demand change. Capacity redesign is decided if the fluctuation demand exceeds the available capacity through a combination of making investment on new machines and outsourcing while considering for minimizing the cost of idle capacity in the future. The objective of the model is to minimize the total cost of the line assembly that consists of operating costs, machine cost, adding capacity cost, losses cost due to idle capacity and outsourcing costs. The model develop is based on an integer programming model. The model is tested for a set of data of one year demand with the existing number of sewing machines of 41 units. The result shows that additional maximum capacity up to 76 units of machine required when there is an increase of 60% of the average demand, at the equal cost parameters..

Strategic capacity withholding through failures in the German-Austrian electricity market

International Nuclear Information System (INIS)

Bergler, Julian; Heim, Sven; Hüschelrath, Kai

2017-01-01

In electricity day-ahead markets organized as uniform price auction, a small reduction in supply in times of high demand can cause substantial increases in price. We use a unique data set of failures of generation capacity in the German-Austrian electricity market to investigate the relationship between electricity spot prices and generation failures. Differentiating between strategic and non-strategic failures, we find a positive impact of prices on non-usable marginal generation capacity for strategic failures only. Our empirical analysis therefore provides evidence for the existence of strategic capacity withholding through failures suggesting further monitoring efforts by public authorities to effectively reduce the likelihood of such abuses of a dominant position. - Highlights: • We investigate the relationship between electricity spot prices and generation failures. • Announced (non-strategic) failures are found to decrease with increasing price. • Unannounced (strategic) failures of marginal technologies increase with increasing price. • Our evidence is consistent with the presence of capacity withholding strategies in the German-Austrian electricity market.

Government capacities and stakeholders: what facilitates ehealth legislation?

Science.gov (United States)

2014-01-01

Background Newly established high-technology areas such as eHealth require regulations regarding the interoperability of health information infrastructures and data protection. It is argued that government capacities as well as the extent to which public and private organizations participate in policy-making determine the level of eHealth legislation. Both explanatory factors are influenced by international organizations that provide knowledge transfer and encourage private actor participation. Methods Data analysis is based on the Global Observatory for eHealth - ATLAS eHealth country profiles which summarizes eHealth policies in 114 countries. Data analysis was carried out using two-component hurdle models with a truncated Poisson model for positive counts and a hurdle component model with a binomial distribution for zero or greater counts. Results The analysis reveals that the participation of private organizations such as donors has negative effects on the level of eHealth legislation. The impact of public-private partnerships (PPPs) depends on the degree of government capacities already available and on democratic regimes. Democracies are more responsive to these new regulatory demands than autocracies. Democracies find it easier to transfer knowledge out of PPPs than autocracies. Government capacities increase the knowledge transfer effect of PPPs, thus leading to more eHealth legislation. Conclusions All international regimes – the WHO, the EU, and the OECD – promote PPPs in order to ensure the construction of a national eHealth infrastructure. This paper shows that the development of government capacities in the eHealth domain has to be given a higher priority than the establishment of PPPs, since the existence of some (initial) capacities is the sine qua non of further capacity building. PMID:24410989

Sufficient Flexibility and Capacity in Electricity Markets with Renewables: A Review of Innovative Market Mechanisms

DEFF Research Database (Denmark)

Sekamane, Jonas Khubute; Katz, Jonas; Skytte, Klaus

2017-01-01

This review of the literature collects innovative market mechanisms that tend to get overlooked in the discussion of whether unassisted energy-only markets can ensure sufficient capacity or if capacity remuneration mechanisms are required. The paper complements existing literature reviews...... and pinpoints advantageous research areas relating to the market design of electricity systems with high shares of variable renewable energy...

"It takes more than a fellowship program": reflections on capacity strengthening for health systems research in sub-Saharan Africa.

Science.gov (United States)

Izugbara, Chimaraoke O; Kabiru, Caroline W; Amendah, Djesika; Dimbuene, Zacharie Tsala; Donfouet, Hermann Pythagore Pierre; Atake, Esso-Hanam; Ingabire, Marie-Gloriose; Maluka, Stephen; Mumah, Joyce N; Mwau, Matilu; Ndinya, Mollyne; Ngure, Kenneth; Sidze, Estelle M; Sossa, Charles; Soura, Abdramane; Ezeh, Alex C

2017-12-04

Sub-Saharan Africa (SSA) experiences an acute dearth of well-trained and skilled researchers. This dearth constrains the region's capacity to identify and address the root causes of its poor social, health, development, and other outcomes. Building sustainable research capacity in SSA requires, among other things, locally led and run initiatives that draw on existing regional capacities as well as mutually beneficial global collaborations. This paper describes a regional research capacity strengthening initiative-the African Doctoral Dissertation Research Fellowship (ADDRF) program. This Africa-based and African-led initiative has emerged as a practical and tested platform for producing and nurturing research leaders, strengthening university-wide systems for quality research training and productivity, and building a critical mass of highly-trained African scholars and researchers. The program deploys different interventions to ensure the success of fellows. These interventions include research methods and scientific writing workshops, research and reentry support grants, post-doctoral research support and placements, as well as grants for networking and scholarly conferences attendance. Across the region, ADDRF graduates are emerging as research leaders, showing signs of becoming the next generation of world-class researchers, and supporting the transformations of their home-institutions. While the contributions of the ADDRF program to research capacity strengthening in the region are significant, the sustainability of the initiative and other research and training fellowship programs on the continent requires significant investments from local sources and, especially, governments and the private sector in Africa. The ADDRF experience demonstrates that research capacity building in Africa is possible through innovative, multifaceted interventions that support graduate students to develop different critical capacities and transferable skills and build, expand, and