WorldWideScience

Sample records for production adoptive transfer

  1. The Adoption and Diffusion of Service Products

    OpenAIRE

    Myung Joong Kwon

    2003-01-01

    The objective of this paper is to theoretically explore the innovation, adoption and diffusion of service product. A theoretical model of the diffusion of service product is developed that takes account of transportation, waiting and searching casts in the adoption of service product. The main results of the model are; (1) the diffusion of service product is slower than that of the manufacturing equivalent and (2) the delivery or retail distribution service speeds up the diffusion of the manu...

  2. Transfer And Adoption Of Labour Saving Technologies | Idu ...

    African Journals Online (AJOL)

    The study was carried out to assess the transfer and adoption of labour saving technologies in Apa Local Government area of BenueState. A total sample size One Hundred and Twenty was used in the study. Interview schedule was used to collect the data from respondents. The results revealed that herbicide was adopted ...

  3. Factors Affecting Adoption of Recommended Cauliflower Production Technology in Nepal

    Directory of Open Access Journals (Sweden)

    Pankaj Raj Dhital

    2016-05-01

    Full Text Available Binary logit regression model of econometrics was used to identify the factors affecting adoption of recommended agricultural technology by the commercial farmers of Nepal. A survey was carried out in 2012 in 120 households from Kavre district, Nepal. The objective was to appraise factors affecting adoption of recommended technology of cauliflower, finding out the level of adoption, identifying the constraints of cauliflower cultivation, assessing the perceived level of satisfaction and studying the relationship of certain selected variables on the adoption. Education, Occupation, contact with Personal Localite sources of information, Group membership and Experience were the most influencing factors for adoption of recommended technology. Though, other factors were not strong enough to contribute significantly but indirectly influence the adoption decision of farmers as combined effects. Occupation was found as negatively associated. Landholding size was strongly and positively influencing among the non significant factors. The level of satisfaction and the constraints of cauliflower production were also identified. Transfer of technology will be effective if and only if the client adopts the technology. For an effective transfer of technology, it is better to go for activities for the welfare of the socioeconomic factors of the farmers.

  4. Determinants Of Adoption Of Improved Cassava Production ...

    African Journals Online (AJOL)

    Descriptive statistics and multiple regression analysis were used to analyse the field data The identified cassava production technologies at different stages of adoption by the respondents are use of improved cassava cuttings, use of herbicides/pesticides, Alternate row/crop geometry in a cassava /maize/yam intercrop, ...

  5. Adopting small-scale production of electricity

    Energy Technology Data Exchange (ETDEWEB)

    Tengvard, Maria; Palm, Jenny (Linkoeping Univ., Dept. of Technology and Social Change, Linkoeping (Sweden)). e-mail: maria.tengvard@liu.se

    2009-07-01

    In Sweden in 2008, a 'new' concept for small-scale electricity production attracted massive media attention. This was mainly due to the efforts of Swedish company Egen El, which is marketing small-scale photovoltaics (PVs) and wind turbines to households, both homeowners and tenants. Their main selling point is simplicity: their products are so easy to install that everyone can do it. Autumn 2008 also saw IKEA announce that within three years it would market solar panels. How, then, do households perceive these products? Why would households choose to buy them? How do households think about producing their own electricity? Analysis of material based on in-depth interviews with members of 20 households reveals that environmental concerns supply the main motive for adopting PVs or micro wind power generation. In some cases, the adopting households have an extensively ecological lifestyle and such adoption represents a way to take action in the energy area. For some, this investment is symbolic: a way of displaying environmental consciousness or setting an example to others. For still others, the adoption is a protest against 'the system' with its large dominant actors or is a way to become self-sufficient. These microgeneration installations are rejected mainly on economic grounds; other motives are respect for neighbours and difficulties finding a place to install a wind turbine.

  6. Focus on Adoptive T Cell Transfer Trials in Melanoma

    Directory of Open Access Journals (Sweden)

    Liat Hershkovitz

    2010-01-01

    Full Text Available Adoptive Cell Transfer (ACT of Tumor-Infiltrating Lymphocytes (TIL in combination with lymphodepletion has proven to be an effective treatment for metastatic melanoma patients, with an objective response rate in 50%–70% of the patients. It is based on the ex vivo expansion and activation of tumor-specific T lymphocytes extracted from the tumor and their administration back to the patient. Various TIL-ACT trials, which differ in their TIL generation procedures and patient preconditioning, have been reported. In the latest clinical studies, genetically engineered peripheral T cells were utilized instead of TIL. Further improvement of adoptive T cell transfer depends on new investigations which seek higher TIL quality, increased durable response rates, and aim to treat more patients. Simplifying this therapy may encourage cancer centers worldwide to adopt this promising technology. This paper focuses on the latest progress regarding adoptive T cell transfer, comparing the currently available protocols and discussing their advantages, disadvantages, and implication in the future.

  7. Lymphoma immunotherapy: vaccines, adoptive cell transfer and immunotransplant

    Science.gov (United States)

    Brody, Joshua; Levy, Ronald

    2017-01-01

    Therapy for non-Hodgkin lymphoma has benefited greatly from basic science and clinical research such that chemotherapy and monoclonal antibody therapy have changed some lymphoma subtypes from uniformly lethal to curable, but the majority of lymphoma patients remain incurable. Novel therapies with less toxicity and more specific targeting of tumor cells are needed and immunotherapy is among the most promising of these. Recently completed randomized trials of idiotype vaccines and earlier-phase trials of other vaccine types have shown the ability to induce antitumor T cells and some clinical responses. More recently, trials of adoptive transfer of antitumor T cells have demonstrated techniques to increase the persistence and antitumor effect of these cells. Herein, we discuss lymphoma immunotherapy clinical trial results and what lessons can be taken to improve their effect, including the combination of vaccination and adoptive transfer in an approach we have dubbed ‘immunotransplant’. PMID:20636025

  8. Adoptive Transfer of Dying Cells Causes Bystander-Induced Apoptosis

    Science.gov (United States)

    Schwulst, Steven J.; Davis, Christopher G.; Coopersmith, Craig M.; Hotchkiss, Richard S.

    2009-01-01

    The anti-apoptotic Bcl-2 protein has the remarkable ability to prevent cell death from several noxious stimuli. Intriguingly, Bcl-2 overexpression in one cell type has been reported to protect against cell death in neighboring non-Bcl-2 overexpressing cell types. The mechanism of this “trans” protection has been speculated to be secondary to the release of a cytoprotective factor by Bcl-2 overexpressing cells. We employed a series of adoptive transfer experiments in which lymphocytes that overexpress Bcl-2 were administered to either wild type mice or mice lacking mature T and B cells (Rag-1-/-) to detect the presence or absence of the putative protective factor. We were unable to demonstrate “trans” protection. However, adoptive transfer of apoptotic or necrotic cells exacerbated the degree of apoptotic death in neighboring non-Bcl-2 overexpressing cells (p≤0.05). Therefore, this data suggests that dying cells emit signals triggering cell death in neighboring non-Bcl-2 overexpressing cells, i.e. a “trans” destructive effect. PMID:17194455

  9. Trial Watch: Adoptive cell transfer for oncological indications

    Science.gov (United States)

    Aranda, Fernando; Buqué, Aitziber; Bloy, Norma; Castoldi, Francesca; Eggermont, Alexander; Cremer, Isabelle; Fridman, Wolf Hervé; Fucikova, Jitka; Galon, Jérôme; Spisek, Radek; Tartour, Eric; Zitvogel, Laurence; Kroemer, Guido; Galluzzi, Lorenzo

    2015-01-01

    One particular paradigm of anticancer immunotherapy relies on the administration of (potentially) tumor-reactive immune effector cells. Generally, these cells are obtained from autologous peripheral blood lymphocytes (PBLs) ex vivo (in the context of appropriate expansion, activation and targeting protocols), and re-infused into lymphodepleted patients along with immunostimulatory agents. In spite of the consistent progress achieved throughout the past two decades in this field, no adoptive cell transfer (ACT)-based immunotherapeutic regimen is currently approved by regulatory agencies for use in cancer patients. Nonetheless, the interest of oncologists in ACT-based immunotherapy continues to increase. Accumulating clinical evidence indicates indeed that specific paradigms of ACT, such as the infusion of chimeric antigen receptor (CAR)-expressing autologous T cells, are associated with elevated rates of durable responses in patients affected by various neoplasms. In line with this notion, clinical trials investigating the safety and therapeutic activity of ACT in cancer patients are being initiated at an ever increasing pace. Here, we review recent preclinical and clinical advances in the development of ACT-based immunotherapy for oncological indications. PMID:26451319

  10. Organisational change and the productivity effects of green technology adoption

    OpenAIRE

    Hottenrott, Hanna; Rexhäuser, Sascha; Veugelers, Reinhilde

    2016-01-01

    This study investigates induced productivity effects of firms introducing new environmental technologies. The literature on within-firm organisational change and productivity suggests that firms can achieve higher productivity gains from adopting new technologies if they adapt their organisational structures. Such complementarity effects may be of particular importance for the adoption of greenhouse gas (GHG) abatement technologies. The adoption of these technologies is often induced by publi...

  11. Determinants of adoption and productivity of improved rice varieties ...

    African Journals Online (AJOL)

    The study employed adoption index, logit model and stochastic frontier model to assess the adoption status, its determinants and impact on farmers' productivity respectively. The results show that farmers have responded appreciably to intervention programme that promote the use of improved rice varieties with an adoption ...

  12. Telework adoption and formalization in organizations from a knowlegde transfer perspective

    NARCIS (Netherlands)

    Peters, P.; Batenburg, R.S.

    2015-01-01

    This study uses a knowledge transfer perspective, focusing both on 'disruptive' and 'commiting' consequences of teleworking affecting organisational knowledge transfer, to understand variations in the adoption and formalisation of teleworking practices in organisations. It hypothesises the influence

  13. Adoption of innovative production technologies in the road construction industry

    NARCIS (Netherlands)

    Habets, M.J.M.; van der Sijde, Peter; Voordijk, Johannes T.

    2007-01-01

    New procurement methods encourage the adoption of innovative production technologies. This triggers the need for entrepreneurship in the construction industry. The purpose of this study is to provide insights into the adoption processes of a particular set of new production technologies in the Dutch

  14. Determinants of social contagion during new product adoption

    NARCIS (Netherlands)

    Langley, D.J.; Bijmolt, T.H.A.; Ortt, J.R.; Pals, N.

    2012-01-01

    Social contagion has been shown to play an important role during new product adoption by consumers. Social contagion is the process by which consumers influence each other to adopt and use a product in a specific way. Current literature makes a basic assumption that social contagion is caused by the

  15. Adoption

    Science.gov (United States)

    ... a relative, foster parent, or a completely new family. An adoptive family might be a single parent, a couple, or ... doesn't mean they don't love their adoptive family or feel close to them. This curiosity, which ...

  16. Adoption of Recommended Rice Production Practices among ...

    African Journals Online (AJOL)

    User

    rice production practices by women farmers in Nasarawa State. A total of 203 women rice farmers were selected for the study using multi- ... RRPPs were unavailability of credit facilities, poor marketing system and ... economy which provides employment opportunity for about 70-80 percent of the total ..... shown in Table 1.

  17. Transfer of adoptive immunity to tuberculosis in mice

    International Nuclear Information System (INIS)

    Lefford, M.J.

    1975-01-01

    A system is described for studying adoptive immunity to tuberculosis in syngeneic mice. Donor mice were immunized with 10 4 BCG intravenously, and lymphoid cells were harvested 28 days later. Adoptive immunity was measured in recipient mice in terms of the inhibition of growth of BCG in the liver and spleen following intravenous injection. Adoptive immunity was expressed optimally when recipients were sublethally irradiated (500 R), challenged with 10 4 to 10 5 viable organisms, and given sensitized lymphoid cells intravenously. Adoptive immunity was not manifest until 14 days after challenge and was effective against Mycobacterium tuberculosis H37Rv as well as BCG. Immunity could be conferred by spleen, lymph node, peritoneal exudate, and resident peritoneal (washout) cells. The lymphoid cells conferring immunity were shown to be thymus-dependent lymphocytes by virtue of their nonadherence to glass wool and sensitivity to anti-theta serum plus complement. The sensitized cells were relatively susceptible to both in vitro and in vivo x irradiation

  18. Adoptive cell transfer in the treatment of metastatic melanoma

    DEFF Research Database (Denmark)

    Straten, Per thor; Becker, Jürgen C

    2009-01-01

    Adoptive cell therapy (ACT) for metastatic cancer is the focus of considerable research effort. Rosenberg's laboratory demonstrated a 50% response rate in stage IV melanoma patients treated with in vitro expanded tumor-infiltrating lymphocytes (TILs) and high-dose IL-2 administered after...

  19. extension communication and farmers' adoption of yam production ...

    African Journals Online (AJOL)

    Ita

    training on seed yam multiplication and small size nature of yam minisett, while ... contact farmers, posters, bulletins and radio served as sources of information to ... KEY WORDS: Adoption, Communication, Channels, Extension, Production, ...

  20. Farmers' adoption of improved vegetable production practices under ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-12-29

    Dec 29, 2008 ... the annual income of the PFs and NPFs, respectively. ... Key words: Adoption, improved vegetable, production practices, farmers and national fadama ..... so, fixed cost components such as depreciation, insurance, repairs,.

  1. Technology adoption and the impact on average productivity

    NARCIS (Netherlands)

    Hellegers, P.J.G.J.; Zeng, D.; Zilberman, D.

    2011-01-01

    In this paper, a framework is developed to analyze how the specifications of new technologies and the heterogeneity of micro-units of production affect the input use, the adoption pattern, and the productivity of inputs. It shows that asset-productivity-enhancing (APE) technologies tend to be

  2. Factors Influencing the Yemeni Customers’ Intention to Adopt Takaful Products

    Directory of Open Access Journals (Sweden)

    Abdelghani Echchabi

    2015-01-01

    Full Text Available The purpose of this study is to examine the Yemeni customers’ intention to adopt Takaful products, and to explore the potential factors that influence their decision. This study applies SEM and one sample t-test to analyse the collected data. The results indicate that among the factors included in this study, only compatibility positively and significantly affects the adoption intention. This is the first study that addresses the adoption of Takaful products in Yemen and the factors that influence it. Furthermore, this study extends the Innovations Diffusion Theory (IDT by applying it to a different setting.

  3. Radioactivity transfer to animal products

    International Nuclear Information System (INIS)

    Coughtrey, P.J.

    1990-01-01

    Information on the behaviour of strontium, caesium, ruthenium, plutonium and americium in a range of domestic animals is reviewed to form a basis for the specification of time-dependent mathematical models describing uptake, distribution and retention in various domestic animals. Transfer factors relating concentration in animal product to daily radioactivity intake are derived after 100 d continuous intake and at equilibrium. These transfer factors are compared with the available published literature and used as a basis for the derivation of feedingstuff conversion factors relating limiting concentrations in animal feedingstuffs to limiting concentrations in human foodstuffs for application to animals receiving commercial feedingstuffs after a nuclear accident. Recommended transfer factors for animal products in conditions of continuous discharge and models for application to field conditions after a nuclear accident are also presented. Transfer of caesium to animal products is more effective than that for the other elements considered here. Transfer to meat of lamb, fattening pig, and chickens is generally more effective than that for other animals and other products

  4. Six sigma and lean production adoption in a manufacturing company

    Directory of Open Access Journals (Sweden)

    Alisson Christian Scheller

    2014-11-01

    Full Text Available The connection among Lean Production with Six Sigma originated the Lean Six Sigma methodology, focused on processes variation and waste reduction. This methodology was developed on different ways in the companies and there is no consensus over its structure and its implementation. In this context, this paper aims to identify and analyze the main characteristics on the adoption and integration of Lean Six Sigma methodology through a case study conducted in a manufacturing company that adopts lean production and six sigma. The results show two important aspects of the Lean Six Sigma methodology. One of them is the adoption of the value stream mapping as a central tool on Lean Six Sigma. The other is the use of DMAIC for improvements actions. The study indicates that despite the difficulties on Lean Six Sigma implementation, the methodology offers benefits to the company that adopts it in the suitable way.

  5. The influence of farmers\\' adoption behaviour on maize production ...

    African Journals Online (AJOL)

    This study was therefore designed to determine the contribution of farmers\\' adoption of recommended maize production practices, namely maize varieties, seed spacing, fertilization and weeding on production efficiency in order to assess the soundness of the advice given to farmers. The research was conducted in the ...

  6. Impact of improved wheat technology adoption on productivity and ...

    African Journals Online (AJOL)

    Wheat (Triticum aestivum L.) is one of the most important cereal crops cultivated in wide range of agro-ecologies in Eastern Africa. However, wheat productivity has remained low. This study was carried out in Ethiopia Aris Zone to determine the level and impact of adoption of improved wheat varieties on wheat productivity ...

  7. Adopting Product Modularity in House Building to Support Mass Customisation

    Directory of Open Access Journals (Sweden)

    Cecília G. da Rocha

    2015-04-01

    Full Text Available Product modularity is a concept that can contribute to the improvement of product quality and production efficiency in house-building. However, there is a lack of consensus in the literature on the concepts that define product modularity. Furthermore, little attention has been given to the differences between building construction and manufacturing, for which product modularity was originally developed. This research aims to address that gap by adapting the conceptualization of product modularity so that it can effectively be used in the house-building industry. The methodological approach adopted in this study was Design Science Research, and two empirical studies were carried out on construction companies based in Brazil and in the U.K. Those studies are used to illustrate the applicability and utility of the proposed concepts and tools. Research findings indicate that the adoption of product modularity concepts results in benefits to both traditional construction technologies and pre-fabricated building systems.

  8. Farmers’ adoption of extensive wheat production – Determinants and implications

    NARCIS (Netherlands)

    Finger, R.; Benni, El N.

    2013-01-01

    Using farm-level panel data, we analyze farmers’ adoption decisions with respect to extensive wheat production, which is supported in Switzerland since 1992 with an ecological direct payment scheme. It shows that in particular farms with a small area under wheat, low levels of input use and low

  9. Adoption of selected innovations in rice production and their effect ...

    African Journals Online (AJOL)

    Adoption of selected innovations in rice production and their effect on farmers living standard in Bauchi local government area, Bauchi state, Nigeria. ... International Journal of Natural and Applied Sciences ... Simple random sampling technique was used for the selection of 82 rice growers from these villages. The data ...

  10. Systematic immunosuppression induced by photodynamic therapy (PDT) is adoptively transferred by macrophages

    International Nuclear Information System (INIS)

    Lynch, D.H.; Haddad, S; King, V.J.; Ott, M.J.; Jolles, C.J.; Straight, R. C.

    1989-01-01

    The purpose of this study was to determine whether photodynamic therapy induced suppression of contact hypersensitivity (CHS) responses was an active phenomenon that could be adoptively transferred by viable splenocytes from PDT-treated mice. Although induction of adoptively transferable suppressor cells in PDT-treated mice required exposure to antigen, the suppressor cells were found to be antigen nonspecific in their function. Furthermore, splenocytes from PDT-treated mice were capable of generating levels of allospecific cytotoxic T lymphocyte (CTL) activity which were comparable to those generated by normal control mice, but the ability of irradiated spleen cells from PDT-treated mice to stimulate a mixed lymphocyte response (MLR) was dramatically impaired. Finally, chromatographic separation of T cells, B cells and macrophages showed that the cell type which mediates adoptively transferable suppression of CHS responsiveness is in the macrophage lineage. (author)

  11. Cost Savings Associated with the Adoption of a Cloud Computing Data Transfer System for Trauma Patients.

    Science.gov (United States)

    Feeney, James M; Montgomery, Stephanie C; Wolf, Laura; Jayaraman, Vijay; Twohig, Michael

    2016-09-01

    Among transferred trauma patients, challenges with the transfer of radiographic studies include problems loading or viewing the studies at the receiving hospitals, and problems manipulating, reconstructing, or evalu- ating the transferred images. Cloud-based image transfer systems may address some ofthese problems. We reviewed the charts of patients trans- ferred during one year surrounding the adoption of a cloud computing data transfer system. We compared the rates of repeat imaging before (precloud) and af- ter (postcloud) the adoption of the cloud-based data transfer system. During the precloud period, 28 out of 100 patients required 90 repeat studies. With the cloud computing transfer system in place, three out of 134 patients required seven repeat films. There was a statistically significant decrease in the proportion of patients requiring repeat films (28% to 2.2%, P < .0001). Based on an annualized volume of 200 trauma patient transfers, the cost savings estimated using three methods of cost analysis, is between $30,272 and $192,453.

  12. Proliferation-linked apoptosis of adoptively transferred T cells after IL-15 administration in macaques.

    Directory of Open Access Journals (Sweden)

    Carolina Berger

    Full Text Available The adoptive transfer of antigen-specific effector T cells is being used to treat human infections and malignancy. T cell persistence is a prerequisite for therapeutic efficacy, but reliably establishing a high-level and durable T cell response by transferring cultured CD8(+ T cells remains challenging. Thus, strategies that promote a transferred high-level T cell response may improve the efficacy of T cell therapy. Lymphodepletion enhances persistence of transferred T cells in mice in part by reducing competition for IL-15, a common γ-chain cytokine that promotes T cell memory, but lymphodepleting regimens have toxicity. IL-15 can be safely administered and has minimal effects on CD4(+ regulatory T cells at low doses, making it an attractive adjunct in adoptive T cell therapy. Here, we show in lymphoreplete macaca nemestrina, that proliferation of adoptively transferred central memory-derived CD8(+ effector T (T(CM/E cells is enhanced in vivo by administering IL-15. T(CM/E cells migrated to memory niches, persisted, and acquired both central memory and effector memory phenotypes regardless of the cytokine treatment. Unexpectedly, despite maintaining T cell proliferation, IL-15 did not augment the magnitude of the transferred T cell response in blood, bone marrow, or lymph nodes. T cells induced to proliferate by IL-15 displayed increased apoptosis demonstrating that enhanced cycling was balanced by cell death. These results suggest that homeostatic mechanisms that regulate T cell numbers may interfere with strategies to augment a high-level T cell response by adoptive transfer of CD8(+ T(CM/E cells in lymphoreplete hosts.

  13. Adoption of automated livestock production systems in Northern Europe

    DEFF Research Database (Denmark)

    Pedersen, Søren Marcus; Lind, Kim Martin Hjorth

    2014-01-01

    In the last decades the development of automated systems in livestock production has gained increasing interest among farmers. A combined use of computers and sensor systems has lead the development into new research areas with automated milking systems, grain drying systems and automated feeding...... on the relationship and adoption patterns among these countries. The paper presents the results of the surveyed population, demography, farm structure with livestock production characteristics and farmers use of selected automated systems in livestock production....... systems. The aim of this paper is to present the results of a farm survey and cluster analysis that have been made among 4 countries in Europe. This study is based on replies from 413 respondents in Germany (eastern part), Greece, Finland and Denmark, respectively, and the study comments...

  14. Delayed age at transfer of adoptees to adoptive parents is associated with increased mortality irrespective of social class of the adoptive parents: a cohort study.

    Science.gov (United States)

    Petersen, Liselotte; Andersen, Per Kragh; Sørensen, Thorkild I A; Mortensen, Erik Lykke

    2018-04-24

    Adverse early life experience and development may have long-term health consequences, but later environmental conditions may perhaps protect against the effects of such early life adversities. The aim was to investigate whether cause-specific and overall mortality rates among adoptees are associated with the age at which they were transferred to the adoptive family and whether the social class of the adoptive family modifies this association. A cohort of 10,592 non-familial adoptions (biologically unrelated adoptee and adoptive parents) of Danish-born children formally granted in 1924-47 and with follow-up of total and cause-specific mortality through ages up to 85 years. The rates of death after the age of 16 from all causes combined, all natural causes, all external causes, and suicide were compared according to the age at which adoptees were transferred to their adoptive family by estimating hazard ratios in Cox regression models. Death rates from all causes were significantly higher in adoptees transferred between age 1 month and 4 years compared to those transferred immediately after birth with the hazard ratio peaking at 1.19 (95% confidence limit: 1.08 to 1.32) for adoptees transferred between 6 and 11 months. This result was primarily driven by a similar pattern for natural causes of death. For death from external causes and for suicide the hazard ratios were increasing with increasing age at transfer, and tests for trend were statistically significant. The social class of the adoptive family did not significantly modify these associations. Transfer to an adoptive family later than at the time of birth may have adverse long-term consequences affecting overall and cause-specific mortality. These effects were not modified by the environment provided by the adoptive family as indicated by the social class of these families.

  15. Mechanisms of action of cannabidiol in adoptively transferred experimental autoimmune encephalomyelitis.

    Science.gov (United States)

    González-García, Coral; Torres, Irene Moreno; García-Hernández, Ruth; Campos-Ruíz, Lucía; Esparragoza, Luis Rodríguez; Coronado, María José; Grande, Aranzazu García; García-Merino, Antonio; Sánchez López, Antonio J

    2017-12-01

    Cannabidiol (CBD) is one of the most important compounds in Cannabis sativa, lacks psychotropic effects, and possesses a high number of therapeutic properties including the amelioration of experimental autoimmune encephalomyelitis (EAE). The aim of this study was to analyse the relative efficacy of CBD in adoptively transferred EAE (at-EAE), a model that allows better delineation of the effector phase of EAE. Splenocytes and lymph nodes from mice with actively induced EAE were cultured in the presence of MOG 35-55 and IL-12 and inoculated intraperitoneally in recipient female C57BL/6J mice. The effects of CBD were evaluated using clinical scores and magnetic resonance imaging (MRI). In the central nervous system, the extent of cell infiltration, axonal damage, demyelination, microglial activation and cannabinoid receptors expression was assessed by immunohistochemistry. Lymph cell viability, apoptosis, oxidative stress and IL-6 production were measured in vitro. Preventive intraperitoneal treatment with CBD ameliorated the clinical signs of at-EAE, and this improvement was accompanied by a reduction of the apparent diffusion coefficient in the subiculum area of the brain. Inflammatory infiltration, axonal damage, and demyelination were reduced, and cannabinoid receptor expression was modulated. Incubation with CBD decreased encephalitogenic cell viability, increasing early apoptosis and reactive oxygen species (ROS) and decreasing IL-6 production. The reduction in viability was not mediated by CB 1 , CB 2 or GPR55 receptors. CBD markedly improved the clinical signs of at-EAE and reduced infiltration, demyelination and axonal damage. The CBD-mediated decrease in the viability of encephalitogenic cells involves ROS generation, apoptosis and a decrease in IL-6 production and may contribute to the therapeutic effect of this compound. Copyright © 2017 Elsevier Inc. All rights reserved.

  16. Adoptive cell transfer using autologous tumor infiltrating lymphocytes in gynecologic malignancies.

    Science.gov (United States)

    Mayor, Paul; Starbuck, Kristen; Zsiros, Emese

    2018-05-23

    During the last decade, the field of cancer immunotherapy has been entirely transformed by the development of new and more effective treatment modalities with impressive response rates and the prospect of long survival. One of the major breakthroughs is adoptive cell transfer (ACT) based on autologous T cells derived from tumor-infiltrating lymphocytes (TILs). TIL-based ACT is a highly personalized cancer treatment. T cells are harvested from autologous fresh tumor tissues, and after ex vivo activation and extensive expansion, are reinfused to patients. TIL-based therapies have only been offered in small phase I/II studies in a few centers given the highly specialized care required, the complexity of TIL production and the very intensive nature of the three-step treatment protocol. The treatment includes high-dose lymphodepleting chemotherapy, the infusion of the expanded and activated T cells and interleukin-2 (IL-2) injections to increase survival of the T cells. Despite the limited data on ACT, the small published studies consistently confirm an impressive clinical response rate of up to 50% in metastatic melanoma patients, including a significant proportion of patients with durable complete response. These remarkable results justify the need for larger clinical trials in other solid tumors, including gynecologic malignancies. In this review we provide an overview of the current clinical results, future applications of TIL-based ACT in gynecologic malignancies, and on risks and challenges associated with modern T cell therapy. Copyright © 2018. Published by Elsevier Inc.

  17. Adoptive T cell transfer for cancer immunotherapy in the era of synthetic biology.

    Science.gov (United States)

    Kalos, Michael; June, Carl H

    2013-07-25

    Adoptive T cell transfer for cancer and chronic infection is an emerging field that shows promise in recent trials. Synthetic-biology-based engineering of T lymphocytes to express high-affinity antigen receptors can overcome immune tolerance, which has been a major limitation of immunotherapy-based strategies. Advances in cell engineering and culture approaches to enable efficient gene transfer and ex vivo cell expansion have facilitated broader evaluation of this technology, moving adoptive transfer from a "boutique" application to the cusp of a mainstream technology. The major challenge currently facing the field is to increase the specificity of engineered T cells for tumors, because targeting shared antigens has the potential to lead to on-target off-tumor toxicities, as observed in recent trials. As the field of adoptive transfer technology matures, the major engineering challenge is the development of automated cell culture systems, so that the approach can extend beyond specialized academic centers and become widely available. Copyright © 2013 Elsevier Inc. All rights reserved.

  18. Effect of adoptive transfer or depletion of regulatory T cells on triptolide-induced liver injury

    Directory of Open Access Journals (Sweden)

    Xinzhi eWang

    2016-04-01

    Full Text Available ObjectiveThe aim of this study is to clarify the role of regulatory T cell (Treg in triptolide (TP-induced hepatotoxicity. MethodsFemale C57BL/6 mice received either adoptive transfer of Tregs or depletion of Tregs, then underwent TP administration and were sacrificed 24 hours after TP administration. Liver injury was determined according to ALT and AST levels in serum and histopathological change in liver tissue. Hepatic frequencies of Treg cells and the mRNA expression levles of transcription factor FoxP3 and RORγt, IL-10, SOCS and Notch/Notch ligand were investigated.ResultsDuring TP-induced liver injury, hepatic Treg and IL-10 decreased, while Th17 cell transcription factor RORγt, SOCS signaling and Notch signaling increased, accompanied with liver inflammation. Adoptive transfer of Tregs ameliorated the severity of TP-induced liver injury, accompanied with increased levels of hepatic Treg and IL-10. Adoptive transfer of Tregs remarkably inhibited the expression of RORγt, SOCS3, Notch1 and Notch3. On the contrary, depletion of Treg cells in TP-administered mice resulted in a notable increase of RORγt, SOCS1, SOCS3 and Notch3, while the Treg and IL-10 of liver decreased. Consistent with the exacerbation of liver injury, higher serum levels of ALT and AST were detected in Treg-depleted mice. ConclusionsThese results showed that adoptive transfer or depletion of Tregs attenuated or aggravated TP-induced liver injury, suggesting that Tregs could play important roles in the progression of liver injury. SOCS proteins and Notch signaling affected Tregs, which may contribute to the pathogenesis of TP-induced hepatotoxicity.

  19. Adoptive cell transfer after chemotherapy enhances survival in patients with resectable HNSCC.

    Science.gov (United States)

    Jiang, Pan; Zhang, Yan; J Archibald, Steve; Wang, Hua

    2015-09-01

    The aims of this study were to evaluate the therapeutic efficacy and to determine the immune factors for treatment success in patients with head and neck squamous cell carcinoma (HNSCC) treated with chemotherapy followed by adoptive cell transfer (ACT). A total of 43 HNSCC patients who received radical resection and chemotherapy were analysed in this study. Twenty-one of the patients were repeatedly treated with ACT after chemotherapy (ACT group), and the other twenty-two patients without ACT treatment were included as part of the control group. To investigate the immunological differences underlying these observations, we expanded and profiled improving cytokine-induced killer cells (iCIK) from peripheral blood mononuclear cells (PBMCs) with the timed addition of RetroNectin, OKT3 mAb, IFN γ and IL-2. The median of progression-free survival (PFS) and overall survival (OS) in the ACT group were significantly higher as compared to the control group (56 vs. 40; 58 vs. 45 months). In iCIK culture, there was a significant reduction in CD3+CD4+ T-cell proliferation and cytokines (IL-2, TNF) production from patients who received chemotherapy compared to patients without chemotherapy. Intra-arterial infusion of iCIK, in coordination with chemotherapy, considerably rescued iCIK culture from the suppression of systemic immunity induced by chemotherapy and induced tumour regression. Altogether, these findings suggest that ACT is an effective neo-adjuvant therapy for rescuing systemic immune suppression and improving survival time in patients with HNSCC. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. Antiangiogenic immunotherapy targeting Flk-1, DNA vaccine and adoptive T cell transfer, inhibits ocular neovascularization

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Han [Department of Ophthalmology, Graduate School of Medical Sciences, Kyushu University, 3-1-1 Maidashi, Higashi-Ku, Fukuoka 812-8582 (Japan); Sonoda, Koh-Hei, E-mail: sonodak@med.kyushu-u.ac.jp [Department of Ophthalmology, Graduate School of Medical Sciences, Kyushu University, 3-1-1 Maidashi, Higashi-Ku, Fukuoka 812-8582 (Japan); Hijioka, Kuniaki; Qiao, Hong; Oshima, Yuji; Ishibashi, Tatsuro [Department of Ophthalmology, Graduate School of Medical Sciences, Kyushu University, 3-1-1 Maidashi, Higashi-Ku, Fukuoka 812-8582 (Japan)

    2009-04-17

    Ocular neovascularization (NV) is the primary cause of blindness in a wide range of ocular diseases. The exact mechanism underlying the pathogenesis of ocular NV is not yet well understood, and so there is no satisfactory therapy for ocular NV. Here, we describe a strategy targeting Flk-1, a self-antigen overexpressed on proliferating endothelial cells in ocular NV, by antiangiogenic immunotherapy-DNA vaccine and adoptive T cell therapy. An oral DNA vaccine encoding Flk-1 carried by attenuated Salmonella typhimurium markedly suppressed development of laser-induced choroidal NV. We further demonstrated that adoptive transfer of vaccine-induced CD8{sup +} T cells reduced pathological preretinal NV, with a concomitant facilitation of physiological revascularization after oxygen-induced retinal vessel obliteration. However, physiological retinal vascular development was unaffected in neonatal mice transferred with vaccine-induced CD8{sup +} T cells. These findings suggested that antiangiogenic immunotherapy targeting Flk-1 such as vaccination and adoptive immunotherapy may contribute to future therapies for ocular NV.

  1. Antiangiogenic immunotherapy targeting Flk-1, DNA vaccine and adoptive T cell transfer, inhibits ocular neovascularization

    International Nuclear Information System (INIS)

    Zhang, Han; Sonoda, Koh-Hei; Hijioka, Kuniaki; Qiao, Hong; Oshima, Yuji; Ishibashi, Tatsuro

    2009-01-01

    Ocular neovascularization (NV) is the primary cause of blindness in a wide range of ocular diseases. The exact mechanism underlying the pathogenesis of ocular NV is not yet well understood, and so there is no satisfactory therapy for ocular NV. Here, we describe a strategy targeting Flk-1, a self-antigen overexpressed on proliferating endothelial cells in ocular NV, by antiangiogenic immunotherapy-DNA vaccine and adoptive T cell therapy. An oral DNA vaccine encoding Flk-1 carried by attenuated Salmonella typhimurium markedly suppressed development of laser-induced choroidal NV. We further demonstrated that adoptive transfer of vaccine-induced CD8 + T cells reduced pathological preretinal NV, with a concomitant facilitation of physiological revascularization after oxygen-induced retinal vessel obliteration. However, physiological retinal vascular development was unaffected in neonatal mice transferred with vaccine-induced CD8 + T cells. These findings suggested that antiangiogenic immunotherapy targeting Flk-1 such as vaccination and adoptive immunotherapy may contribute to future therapies for ocular NV.

  2. The Knowledge Dimension of Production Transfer

    DEFF Research Database (Denmark)

    Riis, Jens Ove; Wæhrens, Brian Vejrum; Madsen, Erik Skov

    2010-01-01

    Empirical studies in three industrial companies have revealed that even companies with many years of experience in production transfer tend to focus attention on planning the physical transfer and on the explicit knowledge associated with normal production. They are uncertain about capturing, trans......­ferring and developing tacit knowledge. Supported by studies in the literature it is concluded that there is a need for a more systematic approach to knowledge transfer and development to provide an accelerated ramp-up after the physical transfer. A framework will be structured around a generic set of phases...... of the transfer process, and a distinction between the sending and the receiving orga­nizational unit. A method for capturing the tacit knowledge embedded in a pro­duction job has been developed and tested. The framework and the method will provide a basis for preparing a master plan for knowledge transfer...

  3. Transferring World Class Production to Developing Countries

    DEFF Research Database (Denmark)

    Bruun, Peter; Mefford, Robert Neil

    1998-01-01

    Strategic reasons for firms to transfer world-class production methods and technology to developing countries are discussed and the importance of the management aspects of technology transfer are emphasized. A five stage model of the technology transfer process which bases the choice of the produ....... The barriers and challenges of implementation are considered, and a socio-technical systems approach is proposed as a way to addapt to local conditions....

  4. 75 FR 53003 - Product List Transfer

    Science.gov (United States)

    2010-08-30

    ... Commission.\\1\\ \\1\\ Request of the United States Postal Service to Transfer Commercial Standard Mail Parcels... Service request to transfer commercial Standard Mail Fulfillment Parcels from the market dominant product... that docket, the Postal Service proposes to segment Standard Mail parcels into two main categories...

  5. PRODUCTIVITY AND LAND ENHANCING TECHNOLOGIES IN NORTHERN ETHIOPIA: HEALTH, PUBLIC INVESTMENTS, AND SEQUENTIAL ADOPTION

    OpenAIRE

    Ersado, Lire; Amacher, Gregory S.; Alwang, Jeffrey Roger

    2003-01-01

    The adoption of more efficient farming practices and technologies that enhance agricultural productivity and improve environmental sustainability is instrumental for achieving economic growth, food security and poverty alleviation in sub-Saharan Africa. Our research examines the interaction between public investments, community health, and adoption of productivity and land enhancing technologies by households in the northern Ethiopian state of Tigray. Agricultural technology adoption decision...

  6. Adoção da estratégia modular por empresas do setor automotivo e as implicações relativas à transferência de atividades no desenvolvimento de produto: um estudo de casos múltiplos Adoption of the modular strategy for companies in the automotive sector and the implications regarding the transfer of new product development activities: a multiple case study

    Directory of Open Access Journals (Sweden)

    Evandro Prieto

    2011-01-01

    Full Text Available A modularidade aplicada ao desenvolvimento de novos produtos, acompanhada da terceirização das atividades de produção, tem sido uma estratégia adotada pelas montadoras automotivas. O desenvolvimento de produto no contexto da estratégia modular implica em uma redistribuição das atividades inerentes a este processo, baseando-se na decomposição e na divisão das tarefas entre as montadoras e seus fornecedores. Nesse contexto, este estudo investiga as implicações da estratégia modular no processo de capacitação e na transferência de atividades de desenvolvimento de produto entre os fornecedores de primeiro e segundo nível da cadeia de suprimentos automotiva. O trabalho é desenvolvido por meio de uma abordagem metodológica de múltiplos casos. As empresas investigadas foram posicionadas em níveis distintos de competências modulares - "embrionária", "em desenvolvimento" e "madura"-, de acordo com as evidências empíricas levantadas. Evidenciou-se uma relação entre o estágio de maturidade de competências e as principais atividades de desenvolvimento de produto.Modularity applied to new product development together with the externalisation of production has been a strategy adopted by automotive companies. New product development in the context of modular strategy implies a redistribution of inherent activities of production. This is based on a work division among assemblers and their suppliers. In this context, this study investigates the implications of modular strategies in the process of transferring value-added activities in new product development between first and second tier suppliers. The study is developed based on a multiple case study approach. The investigated companies were positioned in distinct levels of modular competencies ('embrionary', 'in development', and 'mature', according to empirical evidence. A relationship between the stage of maturity and major new product development practices was identified.

  7. Adoptively transferred immune T cells eradicate established tumors in spite of cancer-induced immune suppression

    Science.gov (United States)

    Arina, Ainhoa; Schreiber, Karin; Binder, David C.; Karrison, Theodore; Liu, Rebecca B.; Schreiber, Hans

    2014-01-01

    Myeloid-derived CD11b+Gr1+ suppressor cells (MDSC) and tumor-associated macrophages (TAM) are considered a major obstacle for effective adoptive T cell therapy. Myeloid cells suppress naive T cell proliferation ex vivo and can prevent the generation of T cell responses in vivo. We find, however, that immune T cells adoptively transferred eradicate well-established tumors in the presence of MDSC and TAM which are strongly immunosuppressive ex vivo. These MDSC and TAM were comparable in levels and immunosuppression among different tumor models. Longitudinal microscopy of tumors in vivo revealed that after T cell transfer tumor vasculature and cancer cells disappeared simultaneously. During T-cell mediated tumor destruction, the tumor stroma contained abundant myeloid cells (mainly TAM) that retained their suppressive properties. Preimmunized but not naive mice resisted immune suppression caused by an unrelated tumor-burden supporting the idea that in vivo, myeloid immunosuppressive cells can suppress naive but not memory T cell responses. PMID:24367029

  8. Bottom-Up Technologies for Reuse: Automated Extractive Adoption of Software Product Lines

    OpenAIRE

    Martinez , Jabier ,; Ziadi , Tewfik; Bissyandé , Tegawendé; Klein , Jacques ,; Le Traon , Yves ,

    2017-01-01

    International audience; Adopting Software Product Line (SPL) engineering principles demands a high up-front investment. Bottom-Up Technologies for Reuse (BUT4Reuse) is a generic and extensible tool aimed to leverage existing similar software products in order to help in extractive SPL adoption. The envisioned users are 1) SPL adopters and 2) Integrators of techniques and algorithms to provide automation in SPL adoption activities. We present the methodology it implies for both types of users ...

  9. Corporate Production Transfers to Developing Countries

    DEFF Research Database (Denmark)

    Bruun, Peter; Wulff, Henrik

    1997-01-01

    Production transfer is defined by the set of activities attached to send off, receipt and running-in a production system in a new environment. The activities concern handling of physical elements as well as non-material, knowledge based issues like documentation, education/training and management...

  10. Recombinant interleukin 2 stimulates in vivo proliferation of adoptively transferred lymphokine-activated killer (LAK) cells

    International Nuclear Information System (INIS)

    Ettinghausen, S.E.; Lipford, E.H. III; Mule, J.J.; Rosenberg, S.A.

    1985-01-01

    The authors previously reported that the adoptive transfer of lymphokine-activated killer (LAK) cells plus repetitive injections of recombinant interleukin 2 (IL 2) produced a marked reduction in established pulmonary metastases from a variety of murine sarcomas. The requirement for the exogenous administration of IL 2 prompted a subsequent examination of the role of IL 2 in the in vivo function of transferred LAK cells. The in vivo proliferation and migration patterns of lymphoid cells in C57BL/6 mice were examined after i.v. transfer of LAK cells alone, i.p. injection of IL 2 alone, or the combination of LAK cells and IL 2. A model for in vivo labeling of the DNA of dividing cells was used in which mice were injected with 5-[ 125 I]-iodo-2'-deoxyuridine ( 125 IUdR) and, 20 hr later, their tissues were removed and were counted in a gamma analyzer. A proliferation index (PI) was calculated by dividing the mean cpm of organs of experimentally treated mice by the mean cpm of organs of control mice. In animals given LAK cells alone, the lungs and liver demonstrated little if any uptake of 125 IUdR above saline-treated controls, whereas the same organs of mice receiving 6000 U of IL 2 alone displayed higher radiolabel incorporation. When mice were given LAK cells plus 6000 U of IL 2, their tissues showed an additional increase in 125 IUdR uptake

  11. Interorganizational transfer of technology - A study of adoption of NASA innovations

    Science.gov (United States)

    Chakrabarti, A. K.; Rubenstein, A. H.

    1976-01-01

    The paper describes a study on the effects of top management support, various techno-economic factors, organizational climate, and decision-making modes on the adoption of NASA innovations. Field research consisted of interviews and questionnaires directed to sixty-five organizations. Forty-five test cases where different decisions for adoption of ideas for new products or processes were made on NASA Tech Briefs were studied in relation to the effects of various factors on the degree of success of adoption, including: (1) the degree of general connection of the technology to the firm's existing operation, (2) the specificity of the relationship between the technology and some existing and recognized problem, (3) the degree of urgency of the problem to which the technology was related, (4) maturity of technology available to implement the technology, (5) availability of personnel and financial resources to implement the technology, (6) degree of top management interest, (7) the use of confrontation in joint-decision, (8) the use of smoothing in decision-making, and (9) the use of forcing in decision-making. It was found that top managements interest was important in the product cases only, and that the success of process innovations was dependent on the quality of information and the specificity of the relationship between the technology and some recognized existing problem.

  12. Analysis of factors influencing adoption of okra production ...

    African Journals Online (AJOL)

    Socio-economic factors influencing adoption of okra technology packages in Enugu State, Nigeria was studied and analyzed in 2012. Purposive and multistage random sampling techniques were used in selecting communities, villages and Okra farmers. The sample size was 90 okra farmers (45Awgu and 45 Aninri Okra ...

  13. Information in launch messages : stimulating the adoption of new high-tech consumer products

    NARCIS (Netherlands)

    Talke, K.S.S.; Snelders, Dirk

    2013-01-01

    This research investigates how the adoption of new high-tech consumer products can be stimulated by communicating product-related information in launch messages. In an initial pilot study, the authors find that for making an adoption decision, consumers require different types of product-related

  14. Protection against rat vaginal candidiasis by adoptive transfer of vaginal B lymphocytes.

    Science.gov (United States)

    De Bernardis, Flavia; Santoni, Giorgio; Boccanera, Maria; Lucciarini, Roberta; Arancia, Silvia; Sandini, Silvia; Amantini, Consuelo; Cassone, Antonio

    2010-06-01

    Vulvovaginal candidiasis is a mucosal infection affecting many women, but the immune mechanisms operating against Candida albicans at the mucosal level remain unknown. A rat model was employed to further characterize the contribution of B and T cells to anti-Candida vaginal protection. Particularly, the protective role of vaginal B cells was studied by means of adoptive transfer of vaginal CD3(-) CD5(+) IgM(+) cells from Candida-immunized rats to naïve animals. This passive transfer of B cells resulted into a number of vaginal C. albicans CFU approximately 50% lower than their controls. Sorted CD3(-) CD5(+) IgM(+) vaginal B lymphocytes from Candida-infected rats proliferated in response to stimulation with an immunodominant mannoprotein (MP) antigen of the fungus. Importantly, anti-MP antibodies and antibody-secreting B cells were detected in the supernatant and cell cultures, respectively, of vaginal B lymphocytes from infected rats incubated in vitro with vaginal T cells and stimulated with MP. No such specific antibodies were found when using vaginal B cells from uninfected rats. Furthermore, inflammatory and anti-inflammatory cytokines, such as interleukin-2 (IL-2), IL-6 and IL-10, were found in the supernatant of vaginal B cells from infected rats. These data are evidence of a partial anti-Candida protective role of CD3(-) CD5(+) IgM(+) vaginal B lymphocytes in our experimental model.

  15. 9 CFR 322.3 - Transferring products for export.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Transferring products for export. 322... INSPECTION AND CERTIFICATION EXPORTS 1 § 322.3 Transferring products for export. When inspected and passed products for export are transferred from tank cars to other containers on vessels, such transfer shall be...

  16. Radionuclide transfer to animal products: revised recommended transfer coefficient values

    International Nuclear Information System (INIS)

    Howard, B.J.; Beresford, N.A.; Barnett, C.L.; Fesenko, S.

    2009-01-01

    A compilation has been undertaken of data which can be used to derive animal product transfer coefficients for radionuclides, including an extensive review of Russian language information. The resultant database has been used to provide recommended transfer coefficient values for a range of radionuclides to (i) cow, sheep and goat milk, (ii) meat (muscle) of cattle, sheep, goats, pigs and poultry and (iii) eggs. The values are used in a new IAEA handbook on transfer parameters which replaces that referred to as 'TRS 364'. The paper outlines the approaches and procedures used to identify and collate data, and assumptions used. There are notable differences between the TRS 364 'expected' values and the recommended values in the revised Handbook from the new database. Of the recommended values, three milk values are at least an order of magnitude higher than the TRS 364 values (Cr, Pu (cow) Pu (sheep)) and one milk value is lower (Ni (cow)). For meat, four values (Am, Cd, Sb (beef) I (pork)) are at least an order of magnitude higher than the TRS 364 values and eight values are at least an order of magnitude lower (Ru, Pu (beef), Ru, Sr, Zn (sheep), Ru, Sr (pork), Mn (poultry)). Many data gaps remain

  17. Radionuclide transfer to animal products: revised recommended transfer coefficient values

    Energy Technology Data Exchange (ETDEWEB)

    Howard, B.J. [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LAI 4AP (United Kingdom)], E-mail: bjho@ceh.ac.uk; Beresford, N.A.; Barnett, C.L. [Centre for Ecology and Hydrology, Lancaster Environment Centre, Library Avenue, Bailrigg, Lancaster LAI 4AP (United Kingdom); Fesenko, S. [International Atomic Energy Agency, 1400 Vienna (Austria)

    2009-03-15

    A compilation has been undertaken of data which can be used to derive animal product transfer coefficients for radionuclides, including an extensive review of Russian language information. The resultant database has been used to provide recommended transfer coefficient values for a range of radionuclides to (i) cow, sheep and goat milk, (ii) meat (muscle) of cattle, sheep, goats, pigs and poultry and (iii) eggs. The values are used in a new IAEA handbook on transfer parameters which replaces that referred to as 'TRS 364'. The paper outlines the approaches and procedures used to identify and collate data, and assumptions used. There are notable differences between the TRS 364 'expected' values and the recommended values in the revised Handbook from the new database. Of the recommended values, three milk values are at least an order of magnitude higher than the TRS 364 values (Cr, Pu (cow) Pu (sheep)) and one milk value is lower (Ni (cow)). For meat, four values (Am, Cd, Sb (beef) I (pork)) are at least an order of magnitude higher than the TRS 364 values and eight values are at least an order of magnitude lower (Ru, Pu (beef), Ru, Sr, Zn (sheep), Ru, Sr (pork), Mn (poultry)). Many data gaps remain.

  18. The Knowledge Dimension of Production Transfer

    DEFF Research Database (Denmark)

    Riis, Jens Ove; Sørensen, Brian Vejrum; Madsen, Erik Skov

    2008-01-01

    Purpose Even companies with many years of experience in production transfer tend to focus much attention on planning the physical move and on the explicit knowledge associated with normal production. At best management is aware of the challenges of capturing the tacit individual and collective...... knowledge having been developed over years in the production unit to be transferred. The purpose of this paper is to develop a model for capturing this hidden knowledge as a basis for supporting an accelerated learning on the new site. Methodology The guiding principle states that hidden knowledge can only...... be captured in the course of acting important incidents. Three case studies illustrate and support the developed model. Findings The case studies show that the classification of the model can be used in practice and provide a comprehensive picture of hidden knowledge to be developed in the new site. Research...

  19. Structural model for sustainable consumption and production adoption

    DEFF Research Database (Denmark)

    Luthra, Sunil; Govindan, Kannan; Mangla, Sachin Kumar

    2017-01-01

    . “Governmental policies and regulations to develop sustainable consumption and production focused system” and “Management support, dedication and involvement in sustainable consumption and production implementation” have been found as the most influencing drivers and “Gaining the market edge and improving...

  20. Technical Considerations for the Generation of Adoptively Transferred T Cells in Cancer Immunotherapy

    Directory of Open Access Journals (Sweden)

    Anthony Visioni

    2016-09-01

    Full Text Available A significant function of the immune system is the surveillance and elimination of aberrant cells that give rise to cancer. Even when tumors are well established and metastatic, immune-mediated spontaneous regressions have been documented. While there are have been various forms of immunotherapy, one of the most widely studied for almost 40 years is adoptive cellular immunotherapy, but its success has yet to be fully realized. Adoptive cell transfer (ACT is a therapeutic modality that has intrigued physicians and researchers for its many theoretical benefits. Preclinical investigations and human trials have utilized natural killer (NK cells, dendritic cells (DC, macrophages, T-cells or B-cells for ACT with the most intense research focused on T-cell ACT. T-cells are exquisitely specific to the target of its T-cell receptor (TCR, thus potentially reducing the amount of collateral damage and off-target effects from treatment. T-cells also possess a memory subset that may reduce the risk of recurrence of a cancer after the successful treatment of the primary disease. There are several options for the source of T-cells used in the generation of cells for ACT. Perhaps the most widely known source is T-cells generated from tumor-infiltrating lymphocytes (TILs. However, studies have also employed peripheral blood mononuclear cells (PBMCs, lymph nodes, and even induced pluripotent stem cells (IPSCs as a source of T-cells. Several important technical considerations exist regarding benefits and limitations of each source of T-cells. Unique aspects of T-cells factor into their ability to be efficacious in ACT including the total number of cells available for ACT, the anti-tumor efficacy on a per cell basis, the repertoire of TCRs specific to tumor cells, and their ability to traffic to various organs that harbor tumor. Current research is attempting to unlock the full potential of these cells to effectively and safely treat cancer.

  1. T-cell involvement in adoptive transfer of line 10 tumor immunity in strain 2 guinea pigs

    International Nuclear Information System (INIS)

    de Jong, W.H.; Steerenberg, P.A.; van de Plas, M.M.; Kruizinga, W.; Ruitenberg, J.

    1985-01-01

    Several aspects of adoptive transfer of tumor immunity were studied in the line 10 hepatocarcinoma in the syngeneic Sewall-Wright strain 2 guinea pig. In particular, the need for cooperation between donor and recipient T-cells was investigated. Donor immune spleen cells remained immunologically capable of inducing tumor rejection for at least 160 days after adoptive transfer. Irradiated (1,000 rad) or mitomycin-treated immune spleen cells lacked tumor-rejection activity, which is indicative of the necessity for in vivo proliferation after adoptive transfer of immunity. Furthermore, adoptive transfer of tumor immunity was abrogated after treatment of the line 10 immune spleen cells with rabbit anti-guinea pig-thymocyte serum (ATS) plus complement. The role of recipient T-cells was investigated in strain 2 guinea pigs which were T-cell depleted by thymectomy, irradiation, and bone marrow reconstitution (T-XBM animals). Severe suppression of T-cell activity was present at 2 and 6 weeks after irradiation and bone marrow reconstitution. At 10 weeks nonspecific T-cell activity was partially restored. The induction of antigen-specific responses, measured by delayed-type hypersensitivity skin testing in vivo and antigenic stimulation in vitro, was suppressed at 2 weeks after irradiation and bone marrow reconstitution. Additional in vivo treatment of T-XBM animals with a rabbit ATS improved the T-cell depletion only moderately. Tumor growth and tumor rejection after adoptive transfer of immunity were equal in normal and T-cell-deprived recipient animals, thus indicating that recipient T-cells are not needed for tumor rejection after adoptive transfer of line 10 tumor immunity

  2. the influence of farmers' adoption behaviour on maize production ...

    African Journals Online (AJOL)

    p2333147

    The main cash crops grown in the country include coffee, sisal, cashew, cotton, tobacco ... Among these food crops, maize is the most important cereal food crop, and ... promoting recommended maize production practices in a package form.

  3. ADOPTION OF SOYBEAN PRODUCTS IN OWERRI NORTH LOCAL ...

    African Journals Online (AJOL)

    iya beji

    ... PRODUCTS IN. OWERRI NORTH LOCAL GOVERNMENT AREA OF IMO STATE, NIGERIA. EDNA C. ... Federal University of Technology, PMB 1526, Owerri, Imo State ... leguminous crops of the world both in its content and nutritional value.

  4. The Effects of Religiosity on New Product Adoption

    Directory of Open Access Journals (Sweden)

    Aysha Karamat Baig

    2016-01-01

    whether one is a believer or a non-believer and cultural dimensions are very vibrant in a society, as religious doctrines shape a secure and stagnant pillar in the society. This paper will assist to highlight its significance and implications in product development related decisions of pharmaceutical industry with reference to the use (prescription/recommendation of pharmaceutical products by Muslim patients (doctors.

  5. Knowledge Incubation and Collaboration for Science, Technology Adoption, Resourcing and Transfer (KIC-START)

    International Nuclear Information System (INIS)

    Ugbor, U.; Cilliers, A.; Kurwitz, R. C.

    2016-01-01

    Full text: In order to address the effectiveness of national networks in Member States, and to implement regional and national strategies, it is important to understand the necessary conditions that ensure successful creation and sharing of knowledge, including, effective policy and programme incentives, promoting collaboration, innovation and networking. Furthermore, Member States with aspirations to develop their nuclear programmes (power and non-power applications in agriculture, industry and health sector), need to develop their own capabilities if they are to fully benefit from the social and economic opportunities from nuclear science and technology. Ultimately nuclear innovation programmes that take into account the role of universities, education and industry would lead to a robust nuclear programme that maximizes social and economic benefit. This paper a presents an initiative for capturing best practices in the areas of university collaboration and innovation, which are driven by learning, research and entrepreneurship. The initiative covers Knowledge (creation), Innovation and Collaboration for Science and Technology Adoption, Resourcing and Transfer (KIC-START). (author

  6. Consumer Innovativeness Model of Indonesian Young People in Adopting Electronic Products

    Directory of Open Access Journals (Sweden)

    Reza Ashari Nasution

    2012-06-01

    Full Text Available It is important for marketers to understand how innovators respond to the introduction of new products. This paper investigates consumer innovativeness (CI from meta-analysis study as suggested by Nasution and Garnida [2011] and examines the simultaneous impacts of CI on new product adoption. Nasution and Garnida [2010] proposed three different perspectives in conceptualizing the CI model. First, the generalist stream that represents a generalized personality trait that engenders consumers to adopt new product. Second, the particularist stream that focuses on product adoption behavior within a specific domain of interest. Third, the integrator perspective that proposes to integrate these two streams by putting domain-specific innovativeness as a mediating factor in relationship between general innovativeness trait and new product adoption.A structural equation model is used to test hypotheses using empirical data from 607 respondents in electronic products adoption. The result shows that the integrator perspective provides the best model in representing the empirical data. The finding of the integrator perspective reveals that domain specific CI mediates the relationship between general innovativeness trait and new product adoption. Specifically, subjective knowledge and hedonic idea shopping enhances the actuality of new products.The findings provide an explanation to the less than consistent relationship between consumer innovativeness and new product adoption. However, a single research context of electronic products and student sample may become one of the limitations and future studies needed to replicate the perspective of CI in different research contexts for greater generalizability and the use of non-student sample. The findings have implications for the innovation adoption theory, for managers involved in the introduction of new products, and for future research on innovation adoption.

  7. Consumer Adoption of Counterfeit Products in a Developing Country

    NARCIS (Netherlands)

    M.M. Lede (Madesta)

    2013-01-01

    markdownabstract__Abstract__ With an increase in global trade, currently involving almost all countries in the world (expect for a few autarkic ones), there is a growing interest in studying various aspects of trade in counterfeit products. As almost every type of good has been counterfeited

  8. Assessment of the extent of adoption of sweetpotato production ...

    African Journals Online (AJOL)

    Ekwuruchi O.Mbanaso

    available agr-chemicals, lack of contact with important sources of information on sweetpotato ... production, processing, storage, utilization and marketing of root and tuber ..... proposal, Department of Agricultural Extension, University of Nigeria, Nsukka ... Gender Factors in Access and Use of Improved Yam Technologies by.

  9. Physicians’ experience adopting the electronic transfer of care communication tool: barriers and opportunities

    Directory of Open Access Journals (Sweden)

    de Grood C

    2015-01-01

    Full Text Available Chloe de Grood, Katherine Eso, Maria Jose Santana Department of Community Health Sciences, W21C Research and Innovation Centre, Institute of Public Health, University of Calgary, Calgary, AB, Canada Purpose: The purpose of this study was to assess physicians' perceptions on a newly developed electronic transfer of care (e-TOC communication tool and identify barriers and opportunities toward its adoption. Participants and methods: The study was conducted in a tertiary care teaching center as part of a randomized controlled trial assessing the efficacy of an e-TOC communication tool. The e-TOC technology was developed through iterative consultation with stakeholders. This e-TOC summary was populated by acute care physicians (AcPs and communicated electronically to community care physicians (CcPs. The AcPs consisted of attending physicians, resident trainees, and medical students rotating through the Medical Teaching Unit. The CcPs were health care providers caring for patients discharged from hospital to the community. AcPs and CcPs completed validated surveys assessing their experience with the newly developed e-TOC tool. Free text questions were added to gather general comments from both groups of physicians. Units of analysis were individual physicians. Data from the surveys were analyzed using mixed methods. Results: AcPs completed 138 linked pre- and post-rotation surveys. At post-rotation, each AcP completed an average of six e-TOC summaries, taking an average of 37 minutes per e-TOC summary. Over 100 CcPs assessed the quality of the TOC summaries, with an overall rating of 8.3 (standard deviation: 1.48; on a scale of 1–10. Thematic analyses revealed barriers and opportunities encountered by physicians toward the adoption of the e-TOC tool. While the AcPs highlighted issues with timeliness, usability, and presentation, the CcPs identified barriers accessing the web-based TOC summaries, emphasizing that the summaries were timely and the

  10. Clinical responses to adoptive T-cell transfer can be modeled in an autologous immune-humanized mouse model

    DEFF Research Database (Denmark)

    Jespersen, Henrik; Lindberg, Mattias F; Donia, Marco

    2017-01-01

    Immune checkpoint inhibitors and adoptive cell transfer (ACT) of autologous tumor-infiltrating T cells have shown durable responses in patients with melanoma. To study ACT and immunotherapies in a humanized model, we have developed PDXv2.0 - a melanoma PDX model where tumor cells and tumor...

  11. Farmers' Market Manager's Level of Communication and Influence on Electronic Benefits Transfer (EBT) Adoption at Midwest Farmers' Markets.

    Science.gov (United States)

    Hasin, Afroza; Smith, Sylvia

    2018-01-01

    To understand market managers' level of communication and use of technology that might influence decision to adopt Electronic Benefits Transfer (EBT) at farmers' markets. Cross-sectional study using the Theory of Diffusion of Innovation. Electronic survey administered in midwest states of Illinois, Michigan, and Wisconsin. Farmers' market managers in Illinois, Michigan, and Wisconsin. Information on EBT adoption, market managers' communication, and technology use. Binary logistic regression analysis with EBT adoption as the dependent variable and frequency of technology use, partnership with organizations, farmers' market association (FMA) membership, Facebook page and Web site for the market, and primary source of information as independent variables. Chi-square tests and ANOVA were used to compare states and adopter categories. Logistic regression results showed that the odds of adopting EBT was 7.5 times higher for markets that had partnership with other organizations. Compared with non-adopters, a significantly greater number of early adopters had partnership, FMA membership, and a Facebook page and Web site for market, and reported to a board of directors. Markets that had partnership, FMA membership, a Facebook page and Web site, and mandatory reporting to a board of directors were important factors that influenced EBT adoption at midwest farmers' markets. Copyright © 2017 Society for Nutrition Education and Behavior. Published by Elsevier Inc. All rights reserved.

  12. MUC1-specific cytotoxic T lymphocytes eradicate tumors when adoptively transferred in vivo.

    Science.gov (United States)

    Mukherjee, P; Ginardi, A R; Tinder, T L; Sterner, C J; Gendler, S J

    2001-03-01

    We have reported previously that MUC1 transgenic mice with spontaneous tumors of the pancreas (designated MET) naturally develop MHC class I-restricted, MUC1-specific CTLs as tumors progress (P. Mukherjee et al., J. Immunol., 165: 3451-3460, 2000). From these MET mice, we have isolated, expanded, and cloned naturally occurring MUC1-specific CTLs in vitro. In this report, we show that the CTL line is predominantly CD8+ T cells and expresses T-cell receptor Vbeta chains 5.1/5.2, 11, 13, and 2 and Valpha chains 2, 8.3, 3.2, and 11.1/11.2. These CTLs recognize several epitopes on the MUC1 tandem repeat with highest affinity to APGSTAPPA. The CTL clone, on the other hand, is 100% CD8+ cells and expresses a single Vbeta chain of 5.1/5.2 and Valpha2. It recognizes only the H-2Db class I-restricted epitope of MUC1, APGSTAPPA. When adoptively transferred, the CTLs were effective in eradicating MUC1-expressing injected tumor cells including mammary gland cells (C57mg) and B16 melanomas. These results suggest that MUC1-specific CTLs are capable of possibly preventing, or at least substantially delaying, MUC1-expressing tumor formation. To our knowledge, this is the first evidence that demonstrates that the naturally occurring MUC1-specific CTLs isolated from one tumor model has antitumor effects on other MUC1-expressing tumors in vivo. Therefore, our data confirm that MUC1 is an important tumor rejection antigen and can serve as a target for immunotherapy.

  13. The Moderating Roles of Relationship Quality and Dependency in Retailers’ New Product Adoption Decisions

    NARCIS (Netherlands)

    Y.M. van Everdingen (Yvonne); L.M. Sloot (Laurens); P.C. Verhoef (Peter)

    2008-01-01

    textabstractThis study contributes to the retail adoption literature by explicitly focusing on the role of both profit-related and relationship variables in explaining new product adoption decisions by retailers, instead of considering either one of these groups of variables in isolation as has been

  14. [How to carry out work on family planning after adopting production responsibility systems in rural areas].

    Science.gov (United States)

    Xiao, S H

    1982-05-29

    After the Third Meeting of the Eleventh People's Congress, the entire responsibility for agricultural production was transferred to a lower level. Peasants in various areas have adopted the so called production responsibility system, and the phenomenon of an increased population rate has also appeared in some areas. In this article, the author discusses how to solve these problems created by the new situation. The 1st step is try to control population growth through socialist propaganda education, administrative measures, economic incentives and punishments, and family planning work. The 2nd step is to popularize the practice of having only 1 child per household in the rural areas. The 2nd and 3rd child in each family should be controlled and prohibited. This policy formulated by the Central Government should be carried out thoroughly. Families which follow the policy and have only 1 child should be encouraged with economic rewards, and those families which have 2 or more children should be punished economically. The 3rd step is to establish a national work team to be in charge of family planning and birth control. There should be an ideological unity among the nation's leadership. Party members and cadres should establish themselves as good examples for the people so that the population control work may become successful.

  15. An integrated production-inventory model for food products adopting a general raw material procurement policy

    Science.gov (United States)

    Fauza, G.; Prasetyo, H.; Amanto, B. S.

    2018-05-01

    Studies on an integrated production-inventory model for deteriorating items have been done extensively. Most of the studies define deterioration as physical depletion of some inventories over time. This definition may not represent the deterioration characteristics of food products. The quality of food production decreases over time while the quantity remains the same. Further, in the existing models, the raw material is replenished several times (or at least once) within one production cycle. In food industries, however, a food company, for several reasons (e.g., the seasonal raw materials, discounted price, etc.) sometimes will get more benefit if it orders raw materials in a large quantity. Considering this fact, this research, therefore, is aimed at developing a more representative inventory model by (i) considering the quality losses in food and (ii) adopting a general raw material procurement policy. A mathematical model is established to represent the proposed policy in which the total profit of the system is the objective function. To evaluate the performance of the model, a numerical test was conducted. The numerical test indicates that the developed model has better performance, i.e., the total profit is 2.3% higher compared to the existing model.

  16. Expansion of Human Tregs from Cryopreserved Umbilical Cord Blood for GMP-Compliant Autologous Adoptive Cell Transfer Therapy

    Directory of Open Access Journals (Sweden)

    Howard R. Seay

    2017-03-01

    Full Text Available Umbilical cord blood is a traditional and convenient source of cells for hematopoietic stem cell transplantation. Thymic regulatory T cells (Tregs are also present in cord blood, and there is growing interest in the use of autologous Tregs to provide a low-risk, fully human leukocyte antigen (HLA-matched cell product for treating autoimmune diseases, such as type 1 diabetes. Here, we describe a good manufacturing practice (GMP-compatible Treg expansion protocol using fluorescence-activated cell sorting, resulting in a mean 2,092-fold expansion of Tregs over a 16-day culture for a median yield of 1.26 × 109 Tregs from single-donor cryopreserved units. The resulting Tregs passed prior clinical trial release criteria for Treg purity and sterility, including additional rigorous assessments of FOXP3 and Helios expression and epigenetic analysis of the FOXP3 Treg-specific demethylated region (TSDR. Compared with expanded adult peripheral blood Tregs, expanded cord blood Tregs remained more naive, as assessed by continued expression of CD45RA, produced reduced IFN-γ following activation, and effectively inhibited responder T cell proliferation. Immunosequencing of the T cell receptor revealed a remarkably diverse receptor repertoire within cord blood Tregs that was maintained following in vitro expansion. These data support the feasibility of generating GMP-compliant Tregs from cord blood for adoptive cell transfer therapies and highlight potential advantages in terms of safety, phenotypic stability, autoantigen specificity, and tissue distribution.

  17. Factors affecting RFID adoption in the agricultural product distribution industry: empirical evidence from China.

    Science.gov (United States)

    Shi, Ping; Yan, Bo

    2016-01-01

    We conducted an exploratory investigation of factors influencing the adoption of radio frequency identification (RFID) methods in the agricultural product distribution industry. Through a literature review and field research, and based on the technology-organization-environment (TOE) theoretical framework, this paper analyzes factors influencing RFID adoption in the agricultural product distribution industry in reference to three contexts: technological, organizational, and environmental contexts. An empirical analysis of the TOE framework was conducted by applying structural equation modeling based on actual data from a questionnaire survey on the agricultural product distribution industry in China. The results show that employee resistance and uncertainty are not supported by the model. Technological compatibility, perceived effectiveness, organizational size, upper management support, trust between enterprises, technical knowledge, competitive pressure and support from the Chinese government, which are supported by the model, have significantly positive effects on RFID adoption. Meanwhile, organizational size has the strongest positive effect, while competitive pressure levels have the smallest effect. Technological complexities and costs have significantly negative effects on RFID adoption, with cost being the most significantly negative influencing factor. These research findings will afford enterprises in the agricultural products supply chain with a stronger understanding of the factors that influence RFID adoption in the agricultural product distribution industry. In addition, these findings will help enterprises remain aware of how these factors affect RFID adoption and will thus help enterprises make more accurate and rational decisions by promoting RFID application in the agricultural product distribution industry.

  18. IMPACT OF ROW-PLANTING ADOPTION ON PRODUCTIVITY OF RICE FARMING IN NORTHERN GHANA

    Directory of Open Access Journals (Sweden)

    Emmanuel DONKOR

    2016-11-01

    Full Text Available This paper employed the endogenous switching regression and propensity score matching methods to analyse the impact of row-planting technology on rice productivity using 470 rice farms in Northern Ghana. The empirical findings showed that the adoption of row-planting technology exerted greater positive impact on rice yields of smallholder farmers. In addition, rice yields of adopters and non-adopters are driven by farm inputs, socioeconomic, institutional and technological factors. We suggest that achieving self-sufficiency in rice and rural economic transformation in sub-Saharan Africa requires promotion of agricultural technologies including row-planting. Different specific policy interventions are also required to promote rice yields for adopters and non-adopters.

  19. A novel adoptive transfer model of chronic lymphocytic leukemia suggests a key role for T lymphocytes in the disease

    OpenAIRE

    Bagnara, Davide; Kaufman, Matthew S.; Calissano, Carlo; Marsilio, Sonia; Patten, Piers E. M.; Simone, Rita; Chum, Philip; Yan, Xiao-Jie; Allen, Steven L.; Kolitz, Jonathan E.; Baskar, Sivasubramanian; Rader, Christoph; Mellstedt, Hakan; Rabbani, Hodjattallah; Lee, Annette

    2011-01-01

    Chronic lymphocytic leukemia (CLL) is an incurable adult disease of unknown etiology. Understanding the biology of CLL cells, particularly cell maturation and growth in vivo, has been impeded by lack of a reproducible adoptive transfer model. We report a simple, reproducible system in which primary CLL cells proliferate in nonobese diabetes/severe combined immunodeficiency/γcnull mice under the influence of activated CLL-derived T lymphocytes. By cotransferring autologous T lymphocytes, activ...

  20. Dynamic effects of social influence and direct marketing on the adoption of high-technology products

    NARCIS (Netherlands)

    Risselada, H.; Verhoef, P.C.; Bijmolt, T.H.A.

    Many firms capitalize on their customers' social networks to improve the success rate of their new products. In this article, the authors analyze the dynamic effects of social influence and direct marketing on the adoption of a new high-technology product. Social influence is likely to play a role

  1. A Productivity Analysis of Adopting Information Technology for the Treatment of Autism, with Case Studies

    Science.gov (United States)

    Dao, Philip

    2016-01-01

    The adoption of information technology might improve the productivity of autism treatment centers. Productivity improvement might resolve the problem of the insufficient supply of autism treatment service. The problem caused tremendous financial burdens to private individuals and public healthcare systems. The researcher explored the relationships…

  2. Generative innovation practices, customer creativity, and the adoption of new technology products

    DEFF Research Database (Denmark)

    Tanev, Stoyan; Frederiksen, Marianne Harbo

    2014-01-01

    to adopt a new practice. The emphasis on adoption merges together innovation and entrepreneurship by shifting the focus from the inventor and the designer, through the entrepreneur, to the ultimate recipient of the innovative outcomes. Looking at customers as co-creators is critically important......: i) the increasing degree of complexity of everyday technological products requires a higher degree of creativity by customers to adopt; and ii) customer creativity is not only a function of user-technology interaction, it is a function of the various actors in the interactive environment surrounding...

  3. Various Determinant Factors of Production Technology Adoption in Creative Souvenir Micro Enterprise

    Directory of Open Access Journals (Sweden)

    Dumasari Dumasari

    2017-10-01

    Full Text Available This study aims to examine the existence of several factors that determine the power of the adoption of production technology on micro souvenirs creative enterprise. The location of the research was determined purposely in Purbalingga Wetan Subdistrict, Purbalingga District, Central Java Province, Indonesia. Research respondents numbered 28 people. The results showed that the various determinants of the adoption of production technology have economic, social and environmental motives. The power of influence of each factor is also distinct. The adoption of different craftsmen resulted in the quality of souvenir products from coconut waste being unequal. Some have a motif design according to market trend. Product price level is feasible. However, some products are only produced semi-finished. The price of this product is relatively lower. The economic feasibility of craftsmen is closely related to the rate of adoption of production technology. There are small number (<25 percent of craftsmen use mechanical technology. The rest is still aided on the traditional manual techniques in processing waste coconut into souvenirs or creative handicraft.

  4. Game theoretic aspect of production process transfer functions ...

    African Journals Online (AJOL)

    Game theoretic aspect of production process transfer functions. ... On the final analysis, it was shown that relating transfer function to Bayesian games and mechanism design would lead to optimal bids, optimal ... AJOL African Journals Online.

  5. Adoption, Transfers, and Incentives in a Franchise Network with Positive Externalities

    OpenAIRE

    Barrie R. Nault; Albert S. Dexter

    1994-01-01

    We study franchise arrangements that allow franchisees with exclusive territories to own their customers. This permits franchisees to benefit from positive externalities in the franchise network through interfranchise transfers based on the purchases by their customers at other franchises on the network. Using the structure of a single franchisor and many franchisees, we show that, in general, interfranchise transfers between franchisees and incentives for franchisee investment in the expansi...

  6. Immunity to transplantable nitrosourea-induced neurogenic tumors. III. Systemic adoptive transfer of immunity

    International Nuclear Information System (INIS)

    Shibuya, N.; Hochgeschwender, U.; Kida, Y.; Hochwald, G.M.; Thorbecke, G.J.; Cravioto, H.

    1984-01-01

    The effect of intravenously injected tumor immune spleen cells on growth of 3 X 10 5 gliosarcoma T 9 cells injected intradermally (ID) or intracerebrally (IC) into sublethally irradiated CDF rats was evaluated. Spleen cells from donor rats with sufficient immunity to reject 5 X 10 5 T 9 cells inhibited the growth of T 9 cells mixed with spleen cells in a ratio of 1:25 and injected ID, but could not act after intravenous transfer. However, donor rats which had rejected increasing T 9 challenge doses up to 1 X 10 7 cells produced immune spleen cells which, upon IV transfer, could inhibit growth of ID T 9 challenge but not of EB-679, an unrelated glioma, in recipient rats. Rejection of IC T 9 challenge was also obtained after IV transfer, in recipients of such ''hyperimmune'' spleen cells, but was less (60% maximum) than that noted after ID T 9 challenge (100% maximum). The removal of B cells from the transferred spleen cells did not affect the results, suggesting that the specific immunity was mediated by T cells. The authors conclude that the special immunological circumstances of tumors growing in the brain renders them less accessible to rejection by systemically transferred immune cells, but it is nevertheless possible to effect a significant incidence of rejection of syngeneic tumor growth in the brain by the intravenous transfer of hyperimmune spleen cells

  7. Exploring barriers and opportunities in adopting crowdsourcing based new product development in manufacturing SMEs

    Science.gov (United States)

    Qin, Shengfeng; Van der Velde, David; Chatzakis, Emmanouil; McStea, Terry; Smith, Neil

    2016-10-01

    Crowdsourcing is an innovative business practice of obtaining needed services, ideas, or content or even funds by soliciting contributions from a large group of people (the `Crowd'). The potential benefits of utilizing crowdsourcing in product design are well-documented, but little research exists on what are the barriers and opportunities in adopting crowdsourcing in new product development (NPD) of manufacturing SMEs. In order to answer the above questions, a Proof of Market study is carried out on crowdsourcing-based product design under an Innovate UK funded Smart project, which aims at identifying the needs, challenges and future development opportunities associated with adopting crowdsourcing strategies for NPD. The research findings from this study are reported here and can be used to guide future development of crowdsourcing-based collaborative design methods and tools and provide some practical references for industry to adopt this new and emerging collaborative design method in their business.

  8. Regulation of allergic airway inflammation by adoptive transfer of CD4+ T cells preferentially producing IL-10.

    Science.gov (United States)

    Matsuda, Masaya; Doi, Kana; Tsutsumi, Tatsuya; Fujii, Shinya; Kishima, Maki; Nishimura, Kazuma; Kuroda, Ikue; Tanahashi, Yu; Yuasa, Rino; Kinjo, Toshihiko; Kuramoto, Nobuyuki; Mizutani, Nobuaki; Nabe, Takeshi

    2017-10-05

    Anti-inflammatory pharmacotherapy for asthma has mainly depended on the inhalation of glucocorticoids, which non-specifically suppress immune responses. If the anti-inflammatory cytokine interleukin (IL)-10 can be induced by a specific antigen, asthmatic airway inflammation could be suppressed when individuals are exposed to the antigen. The purpose of this study was to develop cellular immunotherapeutics for atopic diseases using IL-10-producing CD4 + T cells. Spleen cells isolated from ovalbumin (OVA)-sensitized mice were cultured with the antigen, OVA and growth factors, IL-21, IL-27 and TGF-β for 7 days. After the 7-day culture, the CD4 + T cells were purified using a murine CD4 magnetic beads system. When the induced CD4 + T cells were stimulated by OVA in the presence of antigen-presenting cells, IL-10 was preferentially produced in vitro. When CD4 + T cells were adoptively transferred to OVA-sensitized mice followed by intratracheal OVA challenges, IL-10 was preferentially produced in the serum and bronchoalveolar lavage fluid in vivo. IL-10 production coincided with the inhibition of eosinophilic airway inflammation and epithelial mucus plugging. Most of the IL-10-producing CD4 + T cells were negative for Foxp3 and GATA-3, transcription factors of naturally occurring regulatory T cells and Th2 cells, respectively, but double positive for LAG-3 and CD49b, surface markers of inducible regulatory T cells, Tr1 cells. Collectively, most of the induced IL-10-producing CD4 + T cells could be Tr1 cells, which respond to the antigen to produce IL-10, and effectively suppressed allergic airway inflammation. The induced Tr1 cells may be useful for antigen-specific cellular immunotherapy for atopic diseases. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. ICT Adoption in Micro and Small Firms: Can Internet Access Improve Labour Productivity?

    OpenAIRE

    Viollaz, Mariana

    2018-01-01

    The rapid spread of information and communication technologies may increase firms’ productivity with important consequences for job creation and for economic growth. This article contributes to this discussion by analysing the impact of internet adoption on labour productivity and the mechanisms shaping this relationship in Peruvian micro and small manufacturing firms over the period 2011-2013. The article estimates a reduced form where labour productivity is a function of internet adoptio...

  10. Transfer of radionuclides by terrestrial food products from semi-natural ecosystems to humans

    International Nuclear Information System (INIS)

    Howard, B.J.

    1996-01-01

    The potential radiological significance of radionuclide transfer to humans via foodstuffs derived from semi-natural ecosystems has become apparent since the Chernobyl accident. Foodchain models developed before this time usually did not take such transfers into account. The processes leading to contamination of food in these environments are complex and current understanding of the transfer mechanisms is incomplete. For these reasons the approach adopted in Chapter 3 is to represent, by means of aggregated parameters, the empirical relationships between ground deposits and concentration in the food product. 107 refs, 2 figs, 9 tabs

  11. Transferring lean management infrastructure for increasing productivity

    Directory of Open Access Journals (Sweden)

    Ph.D.Daniel Georgescu

    2010-12-01

    Full Text Available These years, manufacturing function have been transferred rapidly and globally from matured countries to emerging countries. In this paper is about the critical elements for successful transfer of lean management among sites and countries. Based on this general descriptive analysis, current global transfer activity of Lean as well as its future direction is also described. According to the gradual progress of lean management transfer, necessity of its refinement/reinforcement is recognized and some research subjects are proposed for contributing further encouragement of its global activities. In this paper, based on this understanding, requisites for transfer of lean management are discussed through investigating global activity of Lean and specification of infrastructure enabling its smooth transfer is examined

  12. Forest products industry in a digital age: Factors affecting social media adoption

    Science.gov (United States)

    Kathryn Gazal; Iris Montague; Rajendra Poudel; Jan Wiedenbeck

    2016-01-01

    The use of social media as a marketing tool has increased significantly in recent years. However, limited information is available regarding social media use in the US forest products industry or social media adoption at the organizational level, especially within the business-to-business context. This study presents part two of a two-part series of articles that look...

  13. 136 Determinant of Adoption Pattern of New Product/Services in ...

    African Journals Online (AJOL)

    First Lady

    2013-01-28

    Jan 28, 2013 ... the adoption pattern for effective product management in the hotel industry. Specifically the study .... strong impact on NSD performance were strategic human resource .... affect how he/she chooses new services. in the case of night clubs in. Molumber it ..... Marketing in Nigeria Concepts, Principles and.

  14. Incorporating social impact on new product adoption in choice modeing: A case study in green vehicles

    Energy Technology Data Exchange (ETDEWEB)

    He, Lin; Wang, Mingxian; Chen, Wei; Conzelmann, Guenter

    2014-10-01

    While discrete choice analysis is prevalent in capturing consumer preferences and describing their choice behaviors in product design, the traditional choice modeling approach assumes that each individual makes independent decisions, without considering the social impact. However, empirical studies show that choice is social - influenced by many factors beyond engineering performance of a product and consumer attributes. To alleviate this limitation, we propose a new choice modeling framework to capture the dynamic influence from social networks on consumer adoption of new products. By introducing social influence attributes into a choice utility function, social network simulation is integrated with the traditional discrete choice analysis in a three-stage process. Our study shows the need for considering social impact in forecasting new product adoption. Using hybrid electric vehicles as an example, our work illustrates the procedure of social network construction, social influence evaluation, and choice model estimation based on data from the National Household Travel Survey. Our study also demonstrates several interesting findings on the dynamic nature of new technology adoption and how social networks may influence hybrid electric vehicle adoption. (C) 2014 Elsevier Ltd. All rights reserved

  15. Socio-economic determinants of the awareness and adoption of citrus production practices in Pakistan

    Directory of Open Access Journals (Sweden)

    Saleem Ashraf

    2015-09-01

    Full Text Available Citrus is the leading fruit of Pakistan and famous worldwide especially kinnow cultivar because of its pleasant taste and remarkable quality. The yield of citrus per hectare in Pakistan is almost half of potential due to non-adoption of recommended horticultural practices by citrus growers. Adopting a decision regarding the improvement of practices is usually influenced by various factors including farmers' socio-economic attributes. In order to determine the relationship between socio-economic aspects and the awareness and adoption of recommended citrus production practices the present study was carried out in Sargodha district from central Punjab, Pakistan. The Study was based upon cross sectional survey research design due to availability of sampling frame, probability (random sampling was applied for sample selection. Through random sampling, 120 citrus growers were selected as sample. Structured questionnaire administered through interview was used as a research instrument. Analysis of the data collected from the targeted citrus growers revealed a highly significant influence of education on awareness and adoption. Moreover, significant association was found between citrus cultivation area and awareness and adoption of improved practices. Age also showed significant association with awareness and adoption. Moreover, dominancy of middle aged farmers and illiteracyin the study area strongly point the need of provision of formal and non-formal education and training program for farmers. Young generation needs to be focused and reorientation of youth clubs may help in better way to gain the utmost outcome.

  16. Determination of the Fate and Function of Innate Lymphoid Cells Following Adoptive Transfer of Innate Lymphoid Cell Precursors.

    Science.gov (United States)

    O'Sullivan, Timothy E; Sun, Joseph C

    2018-01-01

    Innate lymphoid cells are a heterogeneous family of tissue-resident and circulating lymphocytes that play an important role in host immunity. Recent studies have profiled the developmental pathways of mature ILCs and have identified ILC progenitors in the bone marrow through the use of transcription factor reporter mice. Here we describe methodology to identify and isolate bone marrow CHILP and ILC2 progenitor (ILC2P) cells based on cell surface marker expression for adoptive transfer into lymphopenic mice to track the fate of developing ILCs.

  17. The Effect of Product Safety Courses on the Adoption and Outcomes of LESS Surgery

    OpenAIRE

    Toomey, Paul G.; Ross, Sharona B.; Choung, Edward; Donn, Natalie; Vice, Michelle; Luberice, Kenneth; Albrink, Michael; Rosemurgy, Alexander S.

    2015-01-01

    Background and Objectives: As technology in surgery evolves, the medical instrument industry is inevitability involved in promoting the use and appropriate (ie, effective and safe) application of its products. This study was undertaken to evaluate industry-supported product safety courses in laparoendoscopic single-site (LESS) surgery, by using the metrics of surgeons' adoption of the technique, safety of the procedure, and surgeons' perception of the surgery. Methods: LESS surgery courses th...

  18. Plasmodium chabaudi in mice. Adoptive transfer of immunity with enriched populations of spleen T and B lymphocytes

    International Nuclear Information System (INIS)

    McDonald, V.; Phillips, R.S.

    1978-01-01

    Thymectomized NIH and C57BL mice were more susceptible to Plasmodium chabaudi than controls, indicating a role for T cells in acquired immunity to the parasite. Enriched populations of T and B cells were prepared from the spleens of immune mice using nylon-wool columns, and were adoptively transferred to syngeneic non-irradiated mice or mice irradiated with 600 or 800 rad. Some immunity could usually be transferred with immune T, B and glass-wool (g.w.) filtered spleen cell populations. In the heavily irradiated mice g.w. filtered immune spleen cells gave the best protection and the immune T cells the least. Preliminary attempts to show synergistic activity between immune T and B cells in irradiated mice were not successful. (author)

  19. The Effect of Alliance Image on the Relationship between Consumer Innovativeness and New Product Adoption

    Directory of Open Access Journals (Sweden)

    Jerome Christia

    2014-04-01

    Full Text Available The adopter classification system suggests that an innovating firm should research the characteristics and behaviors that are specific to consumer innovators and direct communications specifically to them (Kotler 1994. Increasingly, in the face of stiff competition, many companies are strategically forming alliances to create new products to appeal to innovators and non-innovators. An alliance is a cooperative form of organizational structure that centers on core competencies. This creates very important theoretical issues and managerial concerns regarding new product development. These issues affect marketing management, strategies and planning, decision-making processes, market segmentation, target markets and product positioning. Strategic alliances form to obtain enabling technologies that can shorten the new product development process (Shilling and Hill 1998. In addition, alliances are growing strategic phenomenon allowing organizations to focus on their specific areas of expertise and leverage their competitive advantage. Spekman and Sawhney (1990 noted that the motivation for companies to enter into alliances is to obtain strategic advantages. This paper links the concepts of new product adoption, alliance image and consumer innovativeness.  There is evidence that alliance image between strong companies moderates the relationship between consumer innovativeness and the likelihood of new product adoption.

  20. TECHNICAL EFFICIENCY OF PRODUCTION OF QUALITY PROTEIN MAIZE BETWEEN ADOPTERS AND NON-ADOPTERS, AND THE DETERMINANTS IN OYO STATE, NIGERIA

    Directory of Open Access Journals (Sweden)

    Abiodun Elijah OBAYELU

    2016-11-01

    Full Text Available This study determined the technical efficiency (TE of production of Quality Protein Maize (QPM and the effect on the adoption of QPM in Oyo State, Nigeria. QPM is an improved maize variety developed to reduce protein deficiency problems. A total of 100 maize farmers were sampled through a two-stage sampling procedure. Stochastic frontier approach using maximum likelihood estimation (MLE was used to analyse the TE in the production of QPM, while probit regression was used to determine the effect of TE and other socioeconomic characteristics of the respondents on the adoption of QPM. The results revealed a mean TE of 0.89 and 0.78 for adopters and non-adopters of QPM respectively. This implied that adopters of QPM are more technically efficient than the non-adopters. Quantity of seed planted and fertilizer directly and significantly affected the TE of QPM while gross margin of maize farmers and income from other sources (at P<0.05, the level of education of farmers and QPM farm size (P<0.01 have significant and a negative effects on technical inefficiency from the results of the Tobit regression. The age (P<0.05 of the farmer has direct effect on technical inefficiency. In conclusion, TE, level of output, information availability on QPM and early maturity were significant determinants of QPM rather than the gross margin of production. Farmers decide to adopt QPM technology because of the high level of technical efficiency in the production of this variety. Their output from QPM can be increased by 11 percent, while the non-adopters can increase their maize output by 22 percent using the available technology.

  1. Accelerating the Adoption of Second-Tier Reach Standards forApplicable Appliance Products in China

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Jiang; Fridley, David

    2007-03-01

    The minimum energy efficiency standards program for household appliances in China was initiated in 1989. Since 1996, CLASP and its implementing partner, LBNL, have assisted China in developing 11 minimum energy performance standards (MEPS) for 9 products and endorsement labels for 11 products including: refrigerators; air conditioners; clothes washers; televisions; printers; computers; monitors; fax machines; copiers; DVD/VCD players; external power supplies; and set-top boxes (under development). Before 2003, China's traditional approach to standards development involved small increases in efficiency requirements for implementation within 6 months of a standard's approval. Since 2003, China has adopted a new approach in setting MEPS. This new approach involves the development of two tiers of standards--one for initial implementation and a second tier at a more aggressive level of energy efficiency for implementation three to five years later. The second-tier standard is also referred to as a 'reach standard'. Reach standards have now been developed in China for: color TVs; refrigerators; air conditioners; and external power supplies. This report is presented in five sections. After the introduction in Section 1, Section 2 analyzes the distribution of the efficiency of refrigerators and air-conditioners in China based on data collected by the China Energy Label Center for the mandatory energy information label program. The results provide an assessment of the adoption of reach standards for these two products. Section 3 summarizes on-going collaborations with Shanghai related to early local adoption of reach standards, and presents both the impact and an analysis of barriers to the local adoption of reach standard for air-conditioners. Section 4 offers suggestions for local governments on how to move forward in adopting reach standards in their localities and concludes with a summary of the results and a plan for developing local capacity in

  2. Transfer and adoption of conservation farming practices project Checua, in the municipalities of Caldas (Boyaca) and Nemocon (Cundinamarca)

    International Nuclear Information System (INIS)

    Zamudio R, Carmen; Leon S, Tomas E

    2008-01-01

    The local environment authority of Cundinamarca (Car) through Proca (Soil and Water Conservation Program), has been working in the control of the erosion under the preventive approach, by means of the technological transference of the conservation agriculture. In the present study, using ethnographic instruments, including 44 surveys and structured interviews with 54 farmers (out of 79) and 15 surveys with local officials of PROCAR, the degree of adoption of the conservation agriculture in two user groups of the PROCAS settled down in the municipalities of Nemocon (Cundinamarca) and Caldas (Boyaca) was studied. Using like criterion the number of principles of the applied agriculture of conservation indeed, one was that in Nemocon the null (36.84%) and low adoption (31.57%) predominates whereas in Caldas a 72% of users with high degree of adoption exist. The differences found in the adoption degree are explained for many reasons: in the biophysical issues, significant agroecologic advantages for Caldas exist. In the economic issues, the own financial limitations of the small farmers and the influence of economic activities different from the farmers, limited the adoption in both municipalities. In the social issues are very important the personal initiative, the community participation and the institutional intervention through the technical consultant's office (in special the attitude of the adviser) and the time of implementation of the Checua Project in each zone. In the technological issues, the adaptation of the technology to the local conditions is determining, as well as in the symbolic issues it is it the relation of the farmer with its surroundings.

  3. A single exercise bout enhances the manufacture of viral-specific T-cells from healthy donors: implications for allogeneic adoptive transfer immunotherapy.

    Science.gov (United States)

    Spielmann, Guillaume; Bollard, Catherine M; Kunz, Hawley; Hanley, Patrick J; Simpson, Richard J

    2016-05-16

    Cytomegalovirus (CMV) and Epstein-Barr virus (EBV) infections remain a major cause of morbidity and mortality after allogeneic hematopoietic stem cell transplantation (HSCT). The adoptive transfer of donor-derived viral-specific cytotoxic T-cells (VSTs) is an effective treatment for controlling CMV and EBV infections after HSCT; however, new practical methods are required to augment the ex vivo manufacture of multi-VSTs from healthy donors. This study investigated the effects of a single exercise bout on the ex vivo manufacture of multi-VSTs. PBMCs isolated from healthy CMV/EBV seropositive participants before (PRE) and immediately after (POST) 30-minutes of cycling exercise were stimulated with CMV (pp65 and IE1) and EBV (LMP2A and BMLF1) peptides and expanded over 8 days. The number (fold difference from PRE) of T-cells specific for CMV pp65 (2.6), EBV LMP2A (2.5), and EBV BMLF1 (4.4) was greater among the VSTs expanded POST. VSTs expanded PRE and POST had similar phenotype characteristics and were equally capable of MHC-restricted killing of autologous target cells. We conclude that a single exercise bout enhances the manufacture of multi-VSTs from healthy donors without altering their phenotype or function and may serve as a simple and economical adjuvant to boost the production of multi-VSTs for allogeneic adoptive transfer immunotherapy.

  4. Adoption of Dynamic Product Information: An Empirical Investigation of Supporting Purchase Decisions on Product Bundles

    OpenAIRE

    Maass, Wolfgang; Kowatsch, Tobias

    2008-01-01

    Up until now, brick-and-mortar stores provide consumers with static product information in the form of printed product labels. This kind of product information does neither adapt to consumer needs nor facilitates new business models (e.g. consumer experience or ad hoc product bundling by products itself). By contrast, dynamic product information provided by mobile recommendation agents (MRA) may leverage these limitations. In this article we formulate a Simplified Consumer Choice (SCC) model ...

  5. A metabolic derivation of tritium transfer factors in animal products

    International Nuclear Information System (INIS)

    Galeriu, D.; Melintescu, A.; Crout, N. M. J.; Bersford, N. A.; Peterson, S. R.; Hess, M. van

    2001-01-01

    Tritium is a potentially important environmental contaminant arising from the nuclear industry. Because tritium is an isotope of hydrogen, its behaviour in the environment is controlled by the behaviour of hydrogen. Chronic releases of tritium to the atmosphere, in particular, will result in tritium-to-hydrogen (T/H) ratios in plants and animals that are more or less in equilibrium with T/H ratios in the air moisture. Tritium is thus a potentially important contaminant of plant and animal food products. The transfer of tritium from air moisture to plants is quite well understood. In contrast, although a number of regulatory agencies have published transfer coefficient values for diet tritium transfer for a limited number of animal products, a fresh evaluation of these transfers needs to be made In this paper we present an approach for the derivation of tritium transfer coefficients which is based on the metabolism of hydrogen in animals in conjunction with experimental data on tritium transfer. The derived transfer coefficients separately account for transfer to and from free (i.e. water) and organically bound tritium. The predicted transfer coefficients are compared to available data independent of model development. Agreement is good, with the exception of the transfer coefficient for transfer from tritiated water to organically bound tritium in ruminants, which may be attributable to the particular characteristics of ruminant digestion. We show that transfer coefficients will vary in response to the metabolic status of an animal (e.g. stage of lactation, digestibility of diet, etc.) and that the use of a single transfer coefficient from diet to animal product is not appropriate for tritium. It is possible to derive concentration ratio values which relate the concentration of tritiated water and organically bound tritium in an animal product to the corresponding concentrations in the animals diet. These concentration ratios are shown to be less subject to

  6. Adoptive transfer of M2 macrophages reduces neuropathic pain via opioid peptides.

    Science.gov (United States)

    Pannell, Maria; Labuz, Dominika; Celik, Melih Ö; Keye, Jacqueline; Batra, Arvind; Siegmund, Britta; Machelska, Halina

    2016-10-07

    During the inflammation which occurs following nerve damage, macrophages are recruited to the site of injury. Phenotypic diversity is a hallmark of the macrophage lineage and includes pro-inflammatory M1 and anti-inflammatory M2 populations. Our aim in this study was to investigate the ability of polarized M0, M1, and M2 macrophages to secrete opioid peptides and to examine their relative contribution to the modulation of neuropathic pain. Mouse bone marrow-derived cells were cultured as unstimulated M0 macrophages or were stimulated into an M1 phenotype using lipopolysaccharide and interferon-γ or into an M2 phenotype using interleukin-4. The macrophage phenotypes were verified using flow cytometry for surface marker analysis and cytokine bead array for cytokine profile assessment. Opioid peptide levels were measured by radioimmunoassay and enzyme immunoassay. As a model of neuropathic pain, a chronic constriction injury (CCI) of the sciatic nerve was employed. Polarized M0, M1, and M2 macrophages (5 × 10 5 cells) were injected perineurally twice, on days 14 and 15 following CCI or sham surgery. Mechanical and heat sensitivity were measured using the von Frey and Hargreaves tests, respectively. To track the injected macrophages, we also transferred fluorescently stained polarized cells and analyzed the surface marker profile of endogenous and injected cells in the nerves ex vivo. Compared to M0 and M1 cells, M2 macrophages contained and released higher amounts of opioid peptides, including Met-enkephalin, dynorphin A (1-17), and β-endorphin. M2 cells transferred perineurally at the nerve injury site reduced mechanical, but not heat hypersensitivity following the second injection. The analgesic effect was reversed by the perineurally applied opioid receptor antagonist naloxone methiodide. M2 cells did not affect sensitivity following sham surgery. Neither M0 nor M1 cells altered mechanical and heat sensitivity in CCI or sham-operated animals. Tracing the

  7. [Technology transfer to the facility for production of medicines].

    Science.gov (United States)

    Beregovykh, V V; Spitskiĭ, O P

    2013-01-01

    Innovation development of pharmaceutical industry is close connected to knowledge transfer going to each subsequent life cycle phase of medicinal product. Formal regulation of technology and knowledge transfer is essential for achievement high quality during production of medicines designed during development phase. Conceptual tools, approaches and requirements are considered that are necessary for knowledge and technology transfer across all the life cycle phases of medicines. They are based on scientific knowledge of medicinal products and take into account both international and Russian regulations in the area of development, production and distribution of medicines. Importance of taking into consideration all aspects related to quality of medicines in all steps of technology transfer is shown. An approach is described for technology transfer organization for Russian pharmaceutical manufacturers based on international guides in this area.

  8. The Effect of Alliance Image on the Relationship between Consumer Innovativeness and New Product Adoption

    OpenAIRE

    Jerome Christia

    2014-01-01

    The adopter classification system suggests that an innovating firm should research the characteristics and behaviors that are specific to consumer innovators and direct communications specifically to them (Kotler 1994). Increasingly, in the face of stiff competition, many companies are strategically forming alliances to create new products to appeal to innovators and non-innovators. An alliance is a cooperative form of organizational structure that centers on core competencies. This creates v...

  9. Adoptive transfer of murine T cells expressing a chimeric-PD1-Dap10 receptor as an immunotherapy for lymphoma.

    Science.gov (United States)

    Lynch, Adam; Hawk, William; Nylen, Emily; Ober, Sean; Autin, Pierre; Barber, Amorette

    2017-11-01

    Adoptive transfer of T cells is a promising cancer therapy and expression of chimeric antigen receptors can enhance tumour recognition and T-cell effector functions. The programmed death protein 1 (PD1) receptor is a prospective target for a chimeric antigen receptor because PD1 ligands are expressed on many cancer types, including lymphoma. Therefore, we developed a murine chimeric PD1 receptor (chPD1) consisting of the PD1 extracellular domain fused to the cytoplasmic domain of CD3ζ. Additionally, chimeric antigen receptor therapies use various co-stimulatory domains to enhance efficacy. Hence, the inclusion of a Dap10 or CD28 co-stimulatory domain in the chPD1 receptor was compared to determine which domain induced optimal anti-tumour immunity in a mouse model of lymphoma. The chPD1 T cells secreted pro-inflammatory cytokines and lysed RMA lymphoma cells. Adoptive transfer of chPD1 T cells significantly reduced established tumours and led to tumour-free survival in lymphoma-bearing mice. When comparing chPD1 receptors containing a Dap10 or CD28 domain, both receptors induced secretion of pro-inflammatory cytokines; however, chPD1-CD28 T cells also secreted anti-inflammatory cytokines whereas chPD1-Dap10 T cells did not. Additionally, chPD1-Dap10 induced a central memory T-cell phenotype compared with chPD1-CD28, which induced an effector memory phenotype. The chPD1-Dap10 T cells also had enhanced in vivo persistence and anti-tumour efficacy compared with chPD1-CD28 T cells. Therefore, adoptive transfer of chPD1 T cells could be a novel therapy for lymphoma and inclusion of the Dap10 co-stimulatory domain in chimeric antigen receptors may induce a preferential cytokine profile and T-cell differentiation phenotype for anti-tumour therapies. © 2017 John Wiley & Sons Ltd.

  10. Application of Adoptive T-Cell Therapy Using Tumor Antigen-Specific T-Cell Receptor Gene Transfer for the Treatment of Human Leukemia

    Directory of Open Access Journals (Sweden)

    Toshiki Ochi

    2010-01-01

    Full Text Available The last decade has seen great strides in the field of cancer immunotherapy, especially the treatment of melanoma. Beginning with the identification of cancer antigens, followed by the clinical application of anti-cancer peptide vaccination, it has now been proven that adoptive T-cell therapy (ACT using cancer antigen-specific T cells is the most effective option. Despite the apparent clinical efficacy of ACT, the timely preparation of a sufficient number of cancer antigen-specific T cells for each patient has been recognized as its biggest limitation. Currently, therefore, attention is being focused on ACT with engineered T cells produced using cancer antigen-specific T-cell receptor (TCR gene transfer. With regard to human leukemia, ACT using engineered T cells bearing the leukemia antigen-specific TCR gene still remains in its infancy. However, several reports have provided preclinical data on TCR gene transfer using Wilms' tumor gene product 1 (WT1, and also preclinical and clinical data on TCR gene transfer involving minor histocompatibility antigen, both of which have been suggested to provide additional clinical benefit. In this review, we examine the current status of anti-leukemia ACT with engineered T cells carrying the leukemia antigen-specific TCR gene, and discuss the existing barriers to progress in this area.

  11. Technology transfer in a horizontally differentiated product-market

    NARCIS (Netherlands)

    Mukherjee, A.; Balasubramanian, N.

    1999-01-01

    This paper considers technology transfer in a Cournot-duopoly market where the firms produce horizontally differentiated products. It turns out that without the threat of imitation from the licensee, the licenser always transfers its best technology. However, the patent licensing contract consists

  12. The Effect of Product Safety Courses on the Adoption and Outcomes of LESS Surgery.

    Science.gov (United States)

    Toomey, Paul G; Ross, Sharona B; Choung, Edward; Donn, Natalie; Vice, Michelle; Luberice, Kenneth; Albrink, Michael; Rosemurgy, Alexander S

    2015-01-01

    As technology in surgery evolves, the medical instrument industry is inevitability involved in promoting the use and appropriate (ie, effective and safe) application of its products. This study was undertaken to evaluate industry-supported product safety courses in laparoendoscopic single-site (LESS) surgery, by using the metrics of surgeons' adoption of the technique, safety of the procedure, and surgeons' perception of the surgery. LESS surgery courses that involved didactic lectures, operative videos, operation observation, collaborative learning, and simulation, were attended by 226 surgeons. With Florida Hospital Tampa Institutional Review Board approval, the surgeons were queried before and immediately after the course, to assess their attitudes toward LESS surgery. Then, well after the course, the surgeons were contacted, repeatedly if necessary, to complete questionnaires. Before the course, 82% of the surgeons undertook more than 10 laparoscopic operations per month. Immediately after the course, 86% were confident that they were prepared to perform LESS surgery. Months after the course, 77% of the respondents had adopted LESS surgery, primarily cholecystectomy; 59% had added 1 or more trocars in 0-20% of their procedures; and 73% held the opinion that operating room observation was the most helpful learning experience. Complications with LESS surgery were noted 12% of the time. Advantages of the technique were better cosmesis (58%) and patient satisfaction (38%). Disadvantages included risk of complications (37%) and higher technical demand (25%). Seventy-eight percent viewed LESS surgery as an advancement in surgical technique. In multifaceted product safety courses, operating room observation is thought to provide the most helpful instruction for those wanting to undertake LESS surgery. The procedure has been safely adopted by surgeons who frequently perform laparoscopies. The tradeoff is in performing a more difficult technique to obtain better

  13. The Effect of Product Safety Courses on the Adoption and Outcomes of LESS Surgery

    Science.gov (United States)

    Toomey, Paul G.; Ross, Sharona B.; Choung, Edward; Donn, Natalie; Vice, Michelle; Luberice, Kenneth; Albrink, Michael

    2015-01-01

    Background and Objectives: As technology in surgery evolves, the medical instrument industry is inevitability involved in promoting the use and appropriate (ie, effective and safe) application of its products. This study was undertaken to evaluate industry-supported product safety courses in laparoendoscopic single-site (LESS) surgery, by using the metrics of surgeons' adoption of the technique, safety of the procedure, and surgeons' perception of the surgery. Methods: LESS surgery courses that involved didactic lectures, operative videos, operation observation, collaborative learning, and simulation, were attended by 226 surgeons. With Florida Hospital Tampa Institutional Review Board approval, the surgeons were queried before and immediately after the course, to assess their attitudes toward LESS surgery. Then, well after the course, the surgeons were contacted, repeatedly if necessary, to complete questionnaires. Results: Before the course, 82% of the surgeons undertook more than 10 laparoscopic operations per month. Immediately after the course, 86% were confident that they were prepared to perform LESS surgery. Months after the course, 77% of the respondents had adopted LESS surgery, primarily cholecystectomy; 59% had added 1 or more trocars in 0–20% of their procedures; and 73% held the opinion that operating room observation was the most helpful learning experience. Complications with LESS surgery were noted 12% of the time. Advantages of the technique were better cosmesis (58%) and patient satisfaction (38%). Disadvantages included risk of complications (37%) and higher technical demand (25%). Seventy-eight percent viewed LESS surgery as an advancement in surgical technique. Conclusion: In multifaceted product safety courses, operating room observation is thought to provide the most helpful instruction for those wanting to undertake LESS surgery. The procedure has been safely adopted by surgeons who frequently perform laparoscopies. The tradeoff is in

  14. Technology transfers, foreign investment and productivity spillovers

    DEFF Research Database (Denmark)

    Newman, Carol; Rand, John; Talbot, Theodore Purdendu

    2015-01-01

    This paper explores the relationship between foreign direct investment (FDI) and the productivity of host country domestic firms. We rely on a specially designed survey of over 4000 manufacturing firms in Vietnam, and separate out productivity gains along the supply chain (obtained through direct...

  15. Chemical safety of cassava products in regions adopting cassava production and processing - experience from Southern Africa

    DEFF Research Database (Denmark)

    Nyirenda, D.B.; Chiwona-Karltun, L.; Chitundu, M.

    2011-01-01

    and perceptions concerning cassava and chemical food safety. Chips, mixed biscuits and flour, procured from households and markets in three regions of Zambia (Luapula-North, Western and Southern) as well as products from the Northern, Central and Southern regions of Malawi, were analyzed for total cyanogenic...... of products commercially available on the market. Risk assessments disclose that effects harmful to the developing central nervous system (CNS) may be observed at a lower exposure than previously anticipated. We interviewed farmers in Zambia and Malawi about their cultivars, processing procedures......The cassava belt area in Southern Africa is experiencing an unforeseen surge in cassava production, processing and consumption. Little documentation exists on the effects of this surge on processing procedures, the prevailing levels of cyanogenic glucosides of products consumed and the levels...

  16. The transfer of radionuclides into domestic animals and their products

    International Nuclear Information System (INIS)

    Miyamoto, Susumu

    1979-01-01

    The contamination of animal products, especially milk, with radionuclides, are regarded as the important problem in the food chain, and has been one of the remarkable public concerns in Japan since the nuclear tests in 1954. The transfer of several radionuclides into domestic animals and their products is described. 131 I, 90 Sr and 137 Cs are very important as the radionuclides that transfer into domestic animals and their products. The data of the transfer of several orally administered radionuclides into milk from the references are summarized as follows: (1) 131 I transfered into milk was 5 -- 30% of dose (cow), 10 -- 40% (goat). (2) 90 Sr( 89 Sr) transfered into milk was 0.6 -- 1.9% (cow), 0.5 -- 0.6% (goat). (3) 137 Cs( 134 Cs) transfered into milk was 10 -- 13% (cow), 7.0% (goat). (4) 140 Ba- 140 La transfered into milk was 0.6% (cow), 0.1 -- 0.2% (goat). (5) 181 W transfered into milk was 0.06% (goat). (author)

  17. Adoptable Interventions, Human Health, and Food Safety Considerations for Reducing Sodium Content of Processed Food Products.

    Science.gov (United States)

    Allison, Abimbola; Fouladkhah, Aliyar

    2018-02-01

    Although vital for maintaining health when consumed in moderation, various epidemiological studies in recent years have shown a strong association between excess dietary sodium with an array of health complications. These associations are robust and clinically significant for development of hypertension and prehypertension, two of the leading causes of preventable mortality worldwide, in adults with a high-sodium diet. Data from developed nations and transition economies show worldwide sodium intake of higher than recommended amounts in various nations. While natural foods typically contain a moderate amount of sodium, manufactured food products are the main contributor to dietary sodium intake, up to 75% of sodium in diet of American adults, as an example. Lower cost in formulation, positive effects on organoleptic properties of food products, effects on food quality during shelf-life, and microbiological food safety, make sodium chloride a notable candidate and an indispensable part of formulation of various products. Although low-sodium formulation of each product possesses a unique set of challenges, review of literature shows an abundance of successful experiences for products of many categories. The current study discusses adoptable interventions for product development and reformulation of products to achieve a modest amount of final sodium content while maintaining taste, quality, shelf-stability, and microbiological food safety.

  18. Adoptable Interventions, Human Health, and Food Safety Considerations for Reducing Sodium Content of Processed Food Products

    Science.gov (United States)

    Allison, Abimbola; Fouladkhah, Aliyar

    2018-01-01

    Although vital for maintaining health when consumed in moderation, various epidemiological studies in recent years have shown a strong association between excess dietary sodium with an array of health complications. These associations are robust and clinically significant for development of hypertension and prehypertension, two of the leading causes of preventable mortality worldwide, in adults with a high-sodium diet. Data from developed nations and transition economies show worldwide sodium intake of higher than recommended amounts in various nations. While natural foods typically contain a moderate amount of sodium, manufactured food products are the main contributor to dietary sodium intake, up to 75% of sodium in diet of American adults, as an example. Lower cost in formulation, positive effects on organoleptic properties of food products, effects on food quality during shelf-life, and microbiological food safety, make sodium chloride a notable candidate and an indispensable part of formulation of various products. Although low-sodium formulation of each product possesses a unique set of challenges, review of literature shows an abundance of successful experiences for products of many categories. The current study discusses adoptable interventions for product development and reformulation of products to achieve a modest amount of final sodium content while maintaining taste, quality, shelf-stability, and microbiological food safety. PMID:29389843

  19. An Economic Analysis of Pigeonpea Seed Production Technology and Its Adoption Behavior: Indian Context.

    Science.gov (United States)

    Pal, Govind; Channanamchery, Radhika; Singh, R K; Kethineni, Udaya Bhaskar; Ram, H; Prasad, S Rajendra

    2016-01-01

    The present study was based on primary data collected from 100 farmers in Gulbarga district of Karnataka, India, during the agricultural year 2013-2014. Study shows that average land holding size of pigeonpea seed farmers was higher in comparison to grain farmers and district average. The study illustrates a ratio of 32 : 68 towards fixed and variable costs in pigeonpea certified seed production with a total cost of ₹ 39436 and the gross and net returns were ₹ 73300 and ₹ 33864 per hectare, respectively. The total cost of cultivation, gross return, and net return in pigeonpea seed production were higher by around 23, 32, and 44 percent than grain production, respectively. Hence, production of certified seed has resulted in a win-win situation for the farmers with higher yield and increased returns. The decision of the farmer on adoption of seed production technology was positively influenced by his education, age, land holding, irrigated land, number of crops grown, and extension contacts while family size was influencing negatively. Higher yield and profitability associated with seed production can be effectively popularized among farmers, resulting in increased certified seed production.

  20. Determinants of Adoption of Wheat Production Technology Package by Smallholder Farmers: Evidences from Eastern Ethiopia

    Directory of Open Access Journals (Sweden)

    Degefu Kebede

    2017-03-01

    Full Text Available A study was conducted to analyze factors influencing adoption of wheat technology packages by smallholder farmers in Gurawa, Meta and Habro districts in eastern Ethiopia. The analysis was based on a household survey data collected from 136 randomly selected households. A Two-limit Tobit model was used to elucidate factors affecting adoption of technology packages measured based on an index derived from five components of wheat technologies which included row planting, pesticide application, use of improved varieties, and application of inorganic fertilizers, namely, Diammonium Phosphate (DAP and Urea. Among the variables included in the model, variation in district, gender, age of the household head, education status of the household head, farm size, distance to market, distance to FTC (Farmers’ Training Centers, cooperative membership, dependency ratio, and annual income of the households were found to significantly affect the adoption of wheat technology packages. Policy makers, planners and development practitioners should give due attention to these determinants to support smallholder farmers in wheat production and enhance gains derived from it.

  1. Systematic substrate adoption methodology (SAM) for future flexible, generic pharmaceutical production processes

    DEFF Research Database (Denmark)

    Singh, Ravendra; Godfrey, Andy; Gregertsen, Björn

    2013-01-01

    (APIs) for early delivery campaigns. Of these candidates only a few will be successful such that further development is required to scale-up the process. Systematic computer-aided methods and tools are required for faster manufacturing of these API candidates. In this work, a substrate adoption...... methodology (SAM) for a series of substrates with similar molecular functionality has been developed. The objective is to achieve “flexible, fast and future” pharmaceutical production processes by adapting a generic modular process template. Application of the methodology is illustrated through a case study...

  2. Heat and mass transfer during baking: product quality aspects

    NARCIS (Netherlands)

    Asselman, A.; Straten, van G.; Hadiyanto, H.; Boom, R.M.; Esveld, D.C.; Boxtel, van A.J.B.

    2005-01-01

    Abstract Most food product qualities are developed during heating processes. Therefore the internal heating and mass transfer of water are important aspects in food processing. Heating of food products is mostly induced by convection heating. However, the number applications of convective heating in

  3. Subjective Norms as a Driver of Mass Communication Students' Intentions to Adopt New Media Production Technologies

    Science.gov (United States)

    Hopp, Toby M.

    2013-01-01

    In this study, the impact of subjective norms on mass communication students' intentions to adopt new media production technologies was explored. The results indicated that subjective norms play an instrumental role in explaining behavioral intentions to adopt new media technologies. Moreover, the data indicated that public relations students…

  4. Adoptive transfer of EBV specific CD8+ T cell clones can transiently control EBV infection in humanized mice.

    Directory of Open Access Journals (Sweden)

    Olga Antsiferova

    2014-08-01

    Full Text Available Epstein Barr virus (EBV infection expands CD8+ T cells specific for lytic antigens to high frequencies during symptomatic primary infection, and maintains these at significant numbers during persistence. Despite this, the protective function of these lytic EBV antigen-specific cytotoxic CD8+ T cells remains unclear. Here we demonstrate that lytic EBV replication does not significantly contribute to virus-induced B cell proliferation in vitro and in vivo in a mouse model with reconstituted human immune system components (huNSG mice. However, we report a trend to reduction of EBV-induced lymphoproliferation outside of lymphoid organs upon diminished lytic replication. Moreover, we could demonstrate that CD8+ T cells against the lytic EBV antigen BMLF1 can eliminate lytically replicating EBV-transformed B cells from lymphoblastoid cell lines (LCLs and in vivo, thereby transiently controlling high viremia after adoptive transfer into EBV infected huNSG mice. These findings suggest a protective function for lytic EBV antigen-specific CD8+ T cells against EBV infection and against virus-associated tumors in extra-lymphoid organs. These specificities should be explored for EBV-specific vaccine development.

  5. Product meaning, affective use evaluation, and transfer : a preliminary study

    OpenAIRE

    Helfenstein, Sacha

    2005-01-01

    The first part of this investigation explored the multidimensional nature of product meaning, referring to the variety of connotations and functions a consumer associates with a particular product category. The subsequent experiment examined the moderation effects of product meaning and other attributes of the user on (a) the affective evaluation of an obstructed use interaction, and (b) the transfer of emotion between devices presented as being either of the same or a different brand. Althou...

  6. Guidelines for target costing adoption in the development of products for the residential real estate market

    Directory of Open Access Journals (Sweden)

    Reymard Savio Sampaio de Melo

    Full Text Available Abstract This study focuses on the problems associated with the traditional practice of reducing costs in construction and the need to increase business competitiveness in the residential real estate sector. In this context, target costing is a promising approach to improve the competitiveness of companies by ensuring that the products launched on the market do not jeopardize the company's results and value delivery to customers. However, far too little attention is paid to target costing implementation by companies that develop residential real state products for sale and face strong market competition. Thus, this paper seeks to investigate whether the standard framework of target costing in the literature applies - with or without adjustments - to real estate developers. Case study was the research strategy adopted. Guidelines are proposed for the introduction of target costing in the development process of residential real estate products. The proposed guidelines are related to the three main sections of the target costing process: market-driven costing, product-level target costing and component-level target costing.

  7. Neutron cross sections of 28 fission product nuclides adopted in JENDL-1

    International Nuclear Information System (INIS)

    Kikuchi, Yasuyuki; Nakagawa, Tsuneo; Igarasi, Sin-iti; Matsunobu, Hiroyuki; Kawai, Masayoshi; Iijima, Shungo.

    1981-02-01

    This is the final report concerning the evaluated neutron cross sections of 28 fission product nuclides adopted in the first version of Japanese Evaluated Nuclear Data Library (JENDL-1). These 28 nuclides were selected as being most important for fast reactor calculations, and are 90 Sr, 93 Zr, 95 Mo, 97 Mo, 99 Tc, 101 Ru, 102 Ru, 103 Rh, 104 Ru, 105 Pd, 106 Ru, 107 Pd, 109 Ag, 129 I, 131 Xe, 133 Cs, 135 Cs, 137 Cs, 143 Nd, 144 Ce, 144 Nd, 145 Nd, 147 Pm, 147 Sm, 149 Sm, 151 Sm, 153 Eu and 155 Eu. The status of the experimental data was reviewed over the whole energy range. The present evaluation was performed on the basis of the measured data with the aid of theoretical calculations. The optical and statical models were used for evaluation of the smooth cross sections. An improved method was developed in treating the multilevel Breit-Wigner formula for the resonance region. Various physical parameters and the level schemes, adopted in the present work are discussed by comparing with those used in the other evaluations such as ENDF/B-IV, CEA, CNEN-2 and RCN-2. Furthermore, the evaluation method and results are described in detail for each nuclide. The evaluated total, capture and inelastic scattering cross sections are compared with the other evaluated data and some recent measured data. Some problems of the present work are pointed out and ways of their improvement are suggested. (author)

  8. Bimodal ex vivo expansion of T cells from patients with head and neck squamous cell carcinoma: a prerequisite for adoptive cell transfer

    DEFF Research Database (Denmark)

    Junker, Niels; Andersen, Mads Hald; Wenandy, Lynn

    2011-01-01

    Abstract Background aims. Adoptive transfer of tumor-infiltrating lymphocytes (TIL) has proven effective in metastatic melanoma and should therefore be explored in other types of cancer. The aim of this study was to examine the feasibility of potentially expanding clinically relevant quantities o...

  9. Generation of autologous tumor-specific T cells for adoptive transfer based on vaccination, in vitro restimulation and CD3/CD28 dynabead-induced T cell expansion

    DEFF Research Database (Denmark)

    Brimnes, Marie Klinge; Gang, Anne Ortved; Donia, Marco

    2012-01-01

    Adoptive cell transfer (ACT) of in vitro expanded autologous tumor-infiltrating lymphocytes (TIL) has been shown to exert therapeutic efficacy in melanoma patients. We aimed to develop an ACT protocol based on tumor-specific T cells isolated from peripheral blood and in vitro expanded by Dynabeads...

  10. Transfer factors for assessing the dose from radionuclides in agricultural products

    International Nuclear Information System (INIS)

    Ng, Y.C.; Colsher, C.S.; Thompson, S.E.

    1979-01-01

    Transfer factors to predict the environmental transport of radionuclides through terrestrial foodchains to man were derived from the literature for radionuclides associated with the nuclear fuel cycle. We present updated transfer coefficients to predict the concentration of a radionuclide in cow's milk and other animal products and concentration factors (CF) to predict the concentration in a food or feed crop from that in soil. Where possible we note the variation of the transfer factor with physical and chemical form of the radionuclide and environmental factors, and characterize the distribution and uncertainty in the estimate. The updated transfer factors are compared with those listed in regulatory guides. The new estimates lead to recommended changes (both increases and decreases) in the listed transfer coefficients for milk and meat and to the suggested practice of adopting multiple soil-to-plant CF's that vary with the type of crop and soil in the place of a single generic CF to predict the concentration of a radionuclide in a crop from that in soil. The updated transfer factors will be useful to assess the dose from radionuclides released from nuclear facilities and evaluating compliance with regulations governing the release of radionuclides

  11. TECHNOLOGY TRANSFER NETWORKS ON PAPAYA PRODUCTION WITH TRANSITIONAL GROWERS

    Directory of Open Access Journals (Sweden)

    Octavio Cano-Reyes

    2012-11-01

    Full Text Available Social networks analysis applied to rural innovation processes becomes a very useful technology transfer tool, since it helps to understand the complexity of social relationships among people and/or institutions in their environment, and it also defines those innovation networks given in specific working groups or regions. This study was conducted from April to May 2011 to determine those networks and key players present in the group of growers associated as “Productora y Comercializadora de Papaya de Cotaxtla S.P.R. de R.L.”, that influence the technology transfer process in Cotaxtla, Veracruz, Mexico. Data were analyzed using UCINET 6 software. Three centrality measures were obtained: range, degree of mediation and closeness. Of 32 network players, 27 actively diffuse innovations according to their interests; alliances must be established with them to transfer technology. Four growers stand out as central actors, which along with the Instituto Nacional de Investigaciones Forestales Agricolas y Pecuarias, the Colegio de Postgraduados and the growers’ organization itself, could be the most appropriate actors to establish a technology transfer program to accelerate the diffusion and adoption of innovations. Wholesalers, middlemen and credit institutions do not participate in this process, but having capital they could be incorporated in the innovation diffusion process.

  12. Transfer of radionuclides to animal products following ingestion or inhalation

    International Nuclear Information System (INIS)

    Coughtrey, P.J.

    1996-01-01

    Contamination of animal products forms an important pathway in the transfer of radionuclides from source to man. Simulation of radionuclide transfer via animal products requires an understanding of the processes and mechanisms involved in absorption, distribution, turnover and excretion of radionuclides and related elements in animals as well as knowledge of animal grazing habits and husbandry. This paper provides a summary of the metabolism of important radionuclides in typical domestic animals and of the mathematical approaches that have been used to simulate transfer from diet to animal product. The equilibrium transfer factor approach has been used widely but suffers a number of disadvantages when releases or intakes are variable with time or when intakes are short relative to the lifetime of the animal of interest. Dynamic models, especially those of the compartmental type, have been developed and used widely. Both approaches have benefited from experiences obtained after the Chernobyl accident but a number of uncertainties still exist. Whereas there is now extensive knowledge on the behaviour of radiocaesium in both domestic and wild animals, knowledge of the behaviour of other potentially important radionuclides remains limited. Further experimental and metabolic studies will be required to reduce uncertainties associated with the transfer of radionuclides other than radiocaesium and thereby produce a sound basis for radiological assessments. (author)

  13. Transfer of radionuclides into and their removal from agricultural products

    Energy Technology Data Exchange (ETDEWEB)

    Hisamatsu, Shun-ichi [Akita Univ. (Japan). School of Medicine; Takizawa, Yukio

    1996-12-31

    Transfer of radionuclides to agricultural products and their removal before ingestion are reviewed briefly. Ingestion of {sup 137}Cs through various food groups were intensively has been studied from 1960s. The results of these studies indicated that cereals were relatively important food groups in Japan, while dairy products were a critical food group in Western countries. However, Westernization of Japanese diet and other factors recently make dairy products more important. In the case of {sup 137}Cs ingestion from the Chernobyl accident, 43% of total {sup 137}Cs intake was ingested through dairy products. The removal of radionuclides from food by washing, preparing and cooking is also discussed. (author)

  14. Product Meaning, Affective Use Evaluation, and Transfer: A Preliminary Study

    Directory of Open Access Journals (Sweden)

    Sacha Helfenstein

    2005-01-01

    Full Text Available The first part of this investigation explored the multidimensional nature of product meaning, referring to the variety of connotations and functions a consumer associates with a particular product category. The subsequent experiment examined the moderation effects of product meaning and other attributes of the user on (a the affective evaluation of an obstructed use interaction, and (b the transfer of emotion between devices presented as being either of the same or a different brand. Although the failure experience essentially caused frustration, this reaction varied substantially among consumers depending on product meaning, age, and gender. The results also showed that the emotion dimensions of pleasure, arousal, and dominance were affected in distinct ways, and that, in addition to the consumer variables, transfer was mainly dependent on the brand relation. Nevertheless, user frustration did not cause general brand aversion, indicating that poor designs do not unconditionally threaten the customer relationship.

  15. 40 CFR 80.77 - Product transfer documentation.

    Science.gov (United States)

    2010-07-01

    ... gasoline was produced, or importer that imported the gasoline; and (2) Instructions that the gasoline or RBOB may not be combined with any other gasoline or RBOB that was produced at any other refinery or was... (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Reformulated Gasoline § 80.77 Product transfer...

  16. Transfer of chemicals from feed to animal products: The use of transfer factors in risk assessment

    NARCIS (Netherlands)

    Leeman, W.R.; Berg, K.J. van den; Houben, G.F.

    2007-01-01

    The human risk assessment of feed contaminants has often been hampered by a lack of knowledge concerning their behaviour when consumed by livestock. To gain a better understanding of the transfer of contaminants from animal feed to animal products, a meta-analysis of public literature was made. Data

  17. GRECA Review of Chernobyl Data on Transfer to Animal Products

    International Nuclear Information System (INIS)

    Nair, S.; Iijima, T.

    1988-01-01

    This paper presents results of a review carried out by GRECA of Chernobyl fallout data from the OECD countries relevant to transfer to animal products. Two groups of data are considered: data applicable to a large number of different locations within a country obtained from the national monitoring programmes, and detailed data for a few locations obtained by selected organisations or research institutes for model validation purposes. Origins of the data included in this review are first summarized, and the results of a preliminary evaluation is presented for milk and various kinds of meat (mutton and lamb and others). Conclusions concerning transfer factors and uptakes are given, while an estimation of feed-to-milk transfer factor with temporally variable intake and milk concentration of a radionuclide is presented in appendix

  18. Production and transfer of energy and information in Hamiltonian systems.

    Directory of Open Access Journals (Sweden)

    Chris G Antonopoulos

    Full Text Available We present novel results that relate energy and information transfer with sensitivity to initial conditions in chaotic multi-dimensional Hamiltonian systems. We show the relation among Kolmogorov-Sinai entropy, Lyapunov exponents, and upper bounds for the Mutual Information Rate calculated in the Hamiltonian phase space and on bi-dimensional subspaces. Our main result is that the net amount of transfer from kinetic to potential energy per unit of time is a power-law of the upper bound for the Mutual Information Rate between kinetic and potential energies, and also a power-law of the Kolmogorov-Sinai entropy. Therefore, transfer of energy is related with both transfer and production of information. However, the power-law nature of this relation means that a small increment of energy transferred leads to a relatively much larger increase of the information exchanged. Then, we propose an "experimental" implementation of a 1-dimensional communication channel based on a Hamiltonian system, and calculate the actual rate with which information is exchanged between the first and last particle of the channel. Finally, a relation between our results and important quantities of thermodynamics is presented.

  19. Transfer coefficients of radionuclides from feed to livestock products

    International Nuclear Information System (INIS)

    1995-03-01

    The accumulation of data on radionuclide transfer are poor in Japan and those are limited to 90 Sr, 137 Cs and 131 I released from the previous atomic bomb experiments. However, in Europe, intensive studies on environment RI level which affects the restriction of the intake for meats and milk products have been made as the measures against the environment radioactivity due to Chernobyl accident. The transfer coefficients of radionuclides to meats and milk products were estimated on a basis of the data published in the Science of the Total Environment vol.85(1989), Oxford University and CEC Radiation Protection, EUR 12608 EN, Luxembourg, 1990 in addition to the data on Exclusion of Radioactivity from foods, Environment Parameter, series No. 4. On the other hand, the transfer coefficients for Japanese were estimated using the concerned data from published reports and the environment radioactivity data reported by national and local government bodies. In this book, many new data of transfer coefficient are presented in tables along with the previous data collected by international nuclear energy agencies and respective national facilities concerned. (M.N.)

  20. A single exercise bout enhances the manufacture of viral-specific T-cells from healthy donors: implications for allogeneic adoptive transfer immunotherapy

    OpenAIRE

    Guillaume Spielmann; Catherine M. Bollard; Hawley Kunz; Patrick J. Hanley; Richard J. Simpson

    2016-01-01

    Cytomegalovirus (CMV) and Epstein-Barr virus (EBV) infections remain a major cause of morbidity and mortality after allogeneic hematopoietic stem cell transplantation (HSCT). The adoptive transfer of donor-derived viral-specific cytotoxic T-cells (VSTs) is an effective treatment for controlling CMV and EBV infections after HSCT; however, new practical methods are required to augment the ex vivo manufacture of multi-VSTs from healthy donors. This study investigated the effects of a single exer...

  1. CpG Oligodeoxynucleotides Enhance the Efficacy of Adoptive Cell Transfer Using Tumor Infiltrating Lymphocytes by Modifying the Th1 Polarization and Local Infiltration of Th17 Cells

    Directory of Open Access Journals (Sweden)

    Lin Xu

    2010-01-01

    Full Text Available Adoptive cell transfer immunotherapy using tumor infiltrating lymphocytes (TILs was an important therapeutic strategy against tumors. But the efficacy remains limited and development of new strategies is urgent. Recent evidence suggested that CpG-ODNs might be a potent candidate for tumor immunotherapy. Here we firstly reported that CpG-ODNs could significantly enhance the antitumor efficacy of adoptively transferred TILs in vivo accompanied by enhanced activity capacity and proliferation of CD8+ T cells and CD8+ T cells, as well as a Th1 polarization immune response. Most importantly, we found that CpG-ODNs could significantly elevate the infiltration of Th17 cells in tumor mass, which contributed to anti-tumor efficacy of TILs in vivo. Our findings suggested that CpG ODNs could enhance the anti-tumor efficacy of adoptively transferred TILs through modifying Th1 polarization and local infiltration of Th17 cells, which might provide a clue for developing a new strategy for ACT based on TILs.

  2. Transfer of hydrogel product from laboratory to market

    International Nuclear Information System (INIS)

    Asnah Hassan; Norimah Yusof

    2005-01-01

    Wound dressing plays an important role in wound management of burns and other surface injuries. Each year our local health authorities spend around 320 million in importing conventional and modern wound dressing. Modern and synthetic dressing made up only 7% of this imports and more are in demand as their usage usage can reduce the cost of wound treatment up to 60%. Locally produced synthetic dressing will help to reduce the currency flow from the country. MINT has successfully produced a hydrogel- based synthetic dressing during the 7 th Malaysia Plan. The product has been filed for patent in 2000( File no; PI 2000 2615) and has been licensed to Pharmaniaga Manufacturing Bhd for the commercial production on 25 June 2002. This presentation will highlight events leading to the transfer from laboratory scale to a larger scale production at MINT-Pharmaniaga Laboratory. This technology transfer is made possible through integrated effort of personal from various division in MINT. Continuous interaction between MINT researcher and the production unit of the company will ensure that the product will reach the market on time. (Author)

  3. Substrates adoption methodology (SAM) to achieve “Fast, Flexible, Future (F3)” pharmaceutical production processes

    DEFF Research Database (Denmark)

    Singh, Ravendra; Rozada-Sanchez, Raquel; Wrate, Tim

    within the template. In this way the substrates adoption methodology helps to achieve “fast, flexible, future (F3)” pharmaceutical production processes by adapting a recently designed generic modular process-plant. The supporting tools for the substrate adoption are: (1) an ontological knowledge......There is a significant cost associated with process development of a portfolio of pharmaceutical products, few of which will reach the market. Continuous processing will increase the “chemical space” which can increase development efficiency. For example one, particularly attractive option...... is to develop manufacturing processes based on modular continuous systems; a flexible generic continuous modular plant which can be adapted for different substrates. In the work reported here, a substrates adoption methodology (SAM) has been developed. The proposed SAM identifies the necessary changes...

  4. Hands-on 2.0: improving transfer of training via the Society of American Gastrointestinal and Endoscopic Surgeons (SAGES) Acquisition of Data for Outcomes and Procedure Transfer (ADOPT) program.

    Science.gov (United States)

    Dort, Jonathan; Trickey, Amber; Paige, John; Schwarz, Erin; Dunkin, Brian

    2017-08-01

    Practicing surgeons commonly learn new procedures and techniques by attending a "hands-on" course, though trainings are often ineffective at promoting subsequent procedure adoption in practice. We describe implementation of a new program with the SAGES All Things Hernia Hands-On Course, Acquisition of Data for Outcomes and Procedure Transfer (ADOPT), which employs standardized, proven teaching techniques, and 1-year mentorship. Attendee confidence and procedure adoption are compared between standard and ADOPT programs. For the pilot ADOPT course implementation, a hands-on course focusing on abdominal wall hernia repair was chosen. ADOPT participants were recruited among enrollees for the standard Hands-On Hernia Course. Enrollment in ADOPT was capped at 10 participants and limited to a 2:1 student-to-faculty ratio, compared to the standard course 22 participants with a 4:1 student-to-faculty ratio. ADOPT mentors interacted with participants through webinars, phone conferences, and continuous email availability throughout the year. All participants were asked to provide pre- and post-course surveys inquiring about the number of targeted hernia procedures performed and related confidence level. Four of 10 ADOPT participants (40%) and six of 22 standard training participants (27%) returned questionnaires. Over the 3 months following the course, ADOPT participants performed more ventral hernia mesh insertion procedures than standard training participants (median 13 vs. 0.5, p = 0.010) and considerably more total combined procedures (median 26 vs. 7, p = 0.054). Compared to standard training, learners who participated in ADOPT reported greater confidence improvements in employing a components separation via an open approach (p = 0.051), and performing an open transversus abdominis release, though the difference did not achieve statistical significance (p = 0.14). These results suggest that the ADOPT program, with standardized and structured teaching

  5. Immunomodulatory Effects of Hemagglutinin- (HA- Modified A20 B-Cell Lymphoma Expanded as a Brain Tumor on Adoptively Transferred HA-Specific CD4+ T Cells

    Directory of Open Access Journals (Sweden)

    Valentin P. Shichkin

    2014-01-01

    Full Text Available Previously, the mouse A20 B-cell lymphoma engineered to express hemagglutinin (HA antigen (A20HA was used as a systemic tumor model. In this work, we used the A20HA cells as a brain tumor. HA-specific CD4+ T cells were transferred intravenously in a tail vein 5 days after A20HA intracranial inoculation and analyzed on days 2, 9, and 16 after the adoptive transfer by different methods. The transferred cells demonstrated state of activation as early as day 2 after the adoptive transfer and most the of viable HA-specific cells became anergic on day 16. Additionally, symptoms of systemic immunosuppression were observed in mice with massive brain tumors at a late stage of the brain tumor progression (days 20–24 after the A20HA inoculation. Despite that, a deal of HA-specific CD4+ T cells kept the functional activity even at the late stage of A20HA tumor growth. The activated HA-specific CD4+ T cells were found also in the brain of brain-tumor-bearing mice. These cells were still responding to reactivation with HA-peptide in vitro. Our data support an idea about sufficient role of both the tumor-specific and -nonspecific mechanisms inducing immunosuppression in cancer patients.

  6. Adoptive transfer of dendritic cells expressing CD11c reduces the immunological response associated with experimental colitis in BALB/c mice.

    Science.gov (United States)

    Paiatto, Lisiery N; Silva, Fernanda G D; Yamada, Áureo T; Tamashiro, Wirla M S C; Simioni, Patricia U

    2018-01-01

    In addition to conventional therapies, several new strategies have been proposed for modulating autoimmune diseases, including the adoptive transfer of immunological cells. In this context, dendritic cells (DCs) appear to be one of the most promising treatments for autoimmune disorders. The present study aimed to evaluate the effects of adoptive transfer of DCs obtained from both naïve and ovalbumin (OVA)-tolerant mice on the severity of TNBS induced colitis and analyze the eventual protective mechanisms. To induce oral tolerance, BALB/c mice were fed 4mg/mL OVA solution for seven consecutive days. Spleen DCs were isolated from tolerant (tDC) and naïve (nDC) mice, and then adoptively transferred to syngeneic mice. Three days later, colitis was induced in DC treated mice by intrarectal instillation of 100μg2,4,6-trinitrobenzenesulfonic acid (TNBS) dissolved in 50% ethanol. Control subjects received only intrarectal instillation of either TNBS solution or a vehicle. Five days later, mice from all groups were euthanized and examined for physiological and immunological parameters. Regarding the phenotype, we observed that the frequencies of CD11+ MHC II+ and CD11+ MHCII+ CD86+ cells were significantly lower in DCs isolated from tolerant mice than in those from naive mice. However, pretreatment with both types of DCs was able to significantly reduce clinical signs of colitis such as diarrhea, rectal prolapse, bleeding, and cachexia, although only treatment with tDCs was able to prevent weight loss from instillation of TNBS. In vitro proliferation of spleen cells from mice treated with either type of DCs was significantly lower than that observed in splenic cell cultures of naïve mice. Although no significant difference was observed in the frequencies of Treg cells in the experimental groups, the frequency of Th17+CD4+cellsand the secretion of IL-17 were more reduced in the cultures of spleen cells from mice treated with either type of DCs. The levels of IL-9 and IFN

  7. The Influence of New Product Characteristics on Rate of Adoption: Increasing Student Comprehension with the "Bidding for Buyers" Game

    Science.gov (United States)

    Vander Schee, Brian A.

    2012-01-01

    The five characteristics that influence new product rate of adoption are routinely covered in the Principles of Marketing course. Any particular marketing concept such as relative advantage, compatibility, complexity, divisibility, and communicability may not capture interest or engagement among students who take the course as a graduation…

  8. Factors influencing smallholder cocoa production : a management analysis of behavioural decision-making processes of technology adoption and application

    NARCIS (Netherlands)

    Taher, S.

    1996-01-01

    The objectives of the study were to expand present knowledge on the technology adoption and application rates for production inputs and fermentation processing related to farmers' decision- making, and to formulate an optimal technology application policy, particularly for smallholder cocoa

  9. Analysis of the potentiality for implementing of the cleaner production and adopting a sustainable consumption in the Cuban entrepreneurial system

    International Nuclear Information System (INIS)

    Tortosa Ferrer, Barbara Ivette; Orue Valdes, Sonia; Mena Ulecia, Karel

    2007-01-01

    The world economic development has conduced to increase the worsening of the environment as result of the natural resources pollution. The tendency has been toward the unsustainable exploitation of natural resources, to increasing of the goods and services production, as well as, to elevated consumption. In this sense, many countries have planed environmental policies addressed to reducing of pollution introducing cleaner production practices and promoting the adoption of responsible consumption. This article shows the existing potentiality in a selected Cuban companies group for introducing and applying of the cleaner production, as well as, the adoption of a sustainable consumption start from analysis of the obtained results in short-term assessments (quick scans) carried out by the Cuban Environment Agency Focal Point of the National Cleaner Production Network in the period between 2004 and 2007

  10. Adoptive transfer of natural antibodies to non-immunized chickens affects subsequent antigen-specific humoral and cellular immune responses

    NARCIS (Netherlands)

    Lammers, A.; Klomp, M.E.V.; Nieuwland, M.G.B.; Savelkoul, H.F.J.; Parmentier, H.K.

    2004-01-01

    To determine a regulatory function of natural antibodies in the immune response of chickens, pooled plasma obtained from non-immunized (naive) 15 months old hens was subjected to keyhole limpet hemocyanin (KLH) antigen-affinity chromatography. Purified KLH-binding antibodies were adoptively

  11. Transfer prices assignment with integrated production and marketing optimization models

    Directory of Open Access Journals (Sweden)

    Enrique Parra

    2018-04-01

    Full Text Available Purpose: In decentralized organizations (today a great majority of the large multinational groups, much of the decision-making power is in its individual business units-BUs-. In these cases, the management control system (MCS uses transfer prices to coordinate actions of the BUs and to evaluate their performance with the goal of guaranteeing the whole corporation optimum. The purpose of the investigation is to design transfer prices that suit this goal. Design/methodology/approach: Considering the results of the whole company supply chain optimization models (in the presence of seasonality of demand the question is to design a mechanism that creates optimal incentives for the managers of each business unit to drive the corporation to the optimal performance. Mathematical programming models are used as a start point. Findings: Different transfer prices computation methods are introduced in this paper for decentralised organizations with two divisions (production and marketing. The methods take into account the results of the solution of the whole company supply chain optimization model, if exists, and can be adapted to the type of information available in the company. It is mainly focused on transport costs assignment. Practical implications: Using the methods proposed in this paper a decentralized corporation can implement more accurate transfer prices to drive the whole organization to the global optimum performance. Originality/value: The methods proposed are a new contribution to the literature on transfer prices with special emphasis on the practical and easy implementation in a modern corporation with several business units and with high seasonality of demand. Also, the methods proposed are very flexible and can be tuned depending on the type of information available in the company.

  12. Production of 3D-shaped graphene via transfer printing

    International Nuclear Information System (INIS)

    Winters, Sinead; Nolan, Hugo; Duesberg, Georg S.; Hallam, Toby

    2012-01-01

    We present the fabrication of three-dimensional graphene structures supported by a polymer scaffold. The structures are fabricated using transfer printing. The structures could have potential applications in electronics, sensing and electrochemical electrodes. Electrochemical measurements confirm an increase in surface area due to the folding of the graphene over the polymer scaffolding. Further, the production method opens the possibility for strain engineering in graphene, opening a wide range of potential novel effects in the physical and chemical properties of graphene. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  13. Bilingual Instructional Materials Dissemination Project. Report I: A Follow-Up Survey of SEDL Product Adopters.

    Science.gov (United States)

    Butler, Jacqueline; McGinty, John

    The Southwest Evaluation and Research Division conducted a survey of 165 purchasers of bilingual instructional materials produced by SEDL to determine which information channels predominate in the curriculum adoption-decision process. The findings of this survey may be useful in the selection of the most efficient ways to communicate information…

  14. Speech Production in 3-Year-Old Internationally Adopted Children with Unilateral Cleft Lip and Palate

    Science.gov (United States)

    Larsson, AnnaKarin; Schölin, Johnna; Mark, Hans; Jönsson, Radi; Persson, Christina

    2017-01-01

    Background: In the last decade, a large number of children with cleft lip and palate have been adopted to Sweden. A majority of the children were born in China and they usually arrive in Sweden with an unoperated palate. There is currently a lack of knowledge regarding speech and articulation development in this group of children, who also have to…

  15. Transfer of Virtual Water of Woody Forest Products from China

    Directory of Open Access Journals (Sweden)

    Kaisheng Luo

    2018-02-01

    Full Text Available Global freshwater resources are under increasing pressure. It is reported that international trade of water-intensive products (the so-called virtual water trade can be used to ease global water pressure. In spite of the significant amount of international trade of woody forest products, virtual water of woody forest products (VWWFP and the corresponding international trade are largely ignored. However, virtual water research has progressed steadily. This study maps VWWFP and statistically analyzes China’s official data for the period 1993–2014. The results show a rapid increase in the trend of VWWFP flow from China, reaching 7.61 × 1012 m3 or 3.48 times annual virtual water trade for agricultural products. The export and import volumes of China are respectively 1.27 × 1012 m3 and 6.34 × 1012 m3 for 1993–2014. China imported a total of 5.07 × 1012 m3 of VWWFP in 1993–2014 to lessen domestic water pressure, which is five times the annual water transfer via China’s South–North Water Transfer project. Asia and Europe account for the highest contribution (50.52% to China’s import. Other contributors include the Russian Federation (16.63%, Indonesia (13.45%, Canada (13.41%, the United States of America (9.60%, Brazil (7.23% and Malaysia (6.33%. China mainly exports VWWFP to Asia (47.68%, North America (23.24%, and Europe (20.01%. The countries which export the highest amount of VWWFP include the United States of America, Japan, Republic of Korea and Canada. Then the countries which import the highest amount of VWWFP include the Russian Federation, Canada, United States of America, and Brazil. The VWWFP flow study shows an obvious geographical distribution that is driven by proximity and traffic since transportation cost of woody forest products could be significant.

  16. Technology Adoption and Productivity Difference among Growers of New Rice for Africa in Savanna Zone of Nigeria

    Directory of Open Access Journals (Sweden)

    Rahji, MAY.

    2009-01-01

    Full Text Available The use of New Rice for Africa (NERICA and complementary rice production technology is being promoted by Nigeria government in order to increase productivity of upland rice farming. This study examines the levels, determinants and effects of complementary technology adoption on productivity of NERICA rice farming. Data for the study were obtained from sample survey of 227 NERICA rice farmers in the guinea savanna zone using multistage sampling technique. Data collected were analyzed using Tobit regression model and Cobb-Douglas production function. Results showed that the average technology score was 52.1 percent (+ 0.242. Fifty-five percent of the farmers who scored above the mean were categorized as low technology users. Tobit regression estimation shows that farmers' technology score was affected significantly (P< 0.05 by farmer's level of education (0.0127, extension visit (0.0145, farming experience (0.0085, land ownership status (0.0687, credit use (0.0698 and level of rice commercialization (0.3783. Cobb-Douglas production estimation shows a neutrally outward shift in production function as the level of complementary technology increases, indicating increasing productivity. Thus, promotion of complementary technology in NERICA rice production is a worthwhile effort and should continue to be funded. Improvement of those factors that significantly affect adoption of complementary technology is recommended.

  17. The adoption of domestic solar-power systems: Do consumers assess product attributes in a stepwise process?

    International Nuclear Information System (INIS)

    Faiers, Adam; Neame, Charles; Cook, Matt

    2007-01-01

    The adoption of an innovation is partly dependent on the consumers' perception of the product attributes, starting with the 'relative advantage' a product may have over another existing product, and also include issues of compatibility, complexity, observability and trialability. Using diffusion of innovations theory as a conceptual framework, this paper describes a case study that investigated the innovation adoption process that a group of identified potential adopters of domestic solar thermal systems stated they would follow. Data was generated from the results of a postal survey to a group of 43 defined innovators and a group of 350 assumed 'early majority', pragmatic consumers. The survey results showed that while the pragmatic customers did follow the process as theorised in diffusion theory, the innovators disregarded the observability attributes of the innovation and went ahead with implementation without having seen the products beforehand. The group of innovators was also split in their opinion that 'complexity' may be a limiting factor. There were differences in the pragmatic group between certain demographic sub groups. Conclusions are drawn on how the findings may impact marketing activities

  18. Socio-economic assessment on maize production and adoption of open pollinated improved varieties in Dang, Nepal

    Directory of Open Access Journals (Sweden)

    Sanjiv Subedi

    2017-12-01

    Full Text Available Research was conducted from February to May, 2017 for socioeconomic assessment on maize production and adoption of open pollinated improved maize varieties in Dang district of Nepal. Altogether, 100 samples were taken by simple random sampling from the major maize growing areas and relevant publications were reviewed. Focal Group Discussion and Key Informant Survey were also done. Descriptive statistics, unpaired t-test, probit regression and indexing were used for data analysis using statistical tools- SPSS, STATA and MS-Excel. Probit econometric model revealed that ethnicity (1% level, gender (5% level, area under open pollinated improved maize (1% level, seed source dummy (1 % level and number of visits by farmers to agrovet (5% level significantly determined the adoption of open pollinated improved maize varieties. In addition, unpaired t-test revealed that the productivity of open pollinated improved maize varieties was significantly higher (at 1% level than local; also, the multinational companies' hybrids showed significantly higher productivity (at 1% level when compared to open pollinated improved varieties. Furthermore, indexing identified- lack of availability of quality seeds and fertilizers (I= 0.86 as the major problem associated with the maize production. Giving aggressive subsidy on open pollinated improved seeds and dealership to registered agrovets for selling the subsidy seeds could enhance the adoption. Moreover, government organizations working in the areas of agricultural extension and research must focus on adoption of open pollinated improved maize varieties among the farmers, substituting the local and developing the high yielding hybrid varieties in Nepal to increase the maize productivity.

  19. Factors driving and restraining adoption of Automation technologies in Swedish wood product industry.

    OpenAIRE

    Mapulanga, Mwanza; Saladi, Praveen

    2016-01-01

    Swedish wood product industry contributes significantly to the economy of the country. This industry adds more value to the sawn timber produced in order to manufacture different wooden products. Companies in Swedish wood product industry are presently seen as underdeveloped in terms of investments and developments in automation technologies. Automation technologies are seen by companies as a solution for improving productivity, product quality, manufacturing cost reduction and ultimately imp...

  20. Adoptive transfer of transplantation tolerance in the H-2 compatible mouse system CBA/C3H

    International Nuclear Information System (INIS)

    Siegl, E.; Brock, J.; Schulze, H.A.

    1985-01-01

    Transfer of neonatally induced tolerance in the H-2 compatible CBA/C3H strain combination is possible with different efficiency by injection of adherent and non-adherent spleen cells, unseparated spleen cells and lymph node cells from C3H-tolerant CBA mice into sublethal irradiated CBA mice. The most efficient cell populations are adherent spleen cells and lymph node cells. Successfull transfer of transplantation tolerance is not possible to non-irradiated mice. The adherent fraction of spleen cells and lymph node cells contains a suppressor cell population responsible for transplantation tolerance against non-H-2 antigens. The induced transplantation tolerance is not due to a chimeric state of C3H-tolerant CBA mice. (author)

  1. Socio-economic assessment on maize production and adoption of open pollinated improved varieties in Dang, Nepal

    OpenAIRE

    Sanjiv Subedi; Yuga Nath Ghimire; Deepa Devkota

    2017-01-01

    Research was conducted from February to May, 2017 for socioeconomic assessment on maize production and adoption of open pollinated improved maize varieties in Dang district of Nepal. Altogether, 100 samples were taken by simple random sampling from the major maize growing areas and relevant publications were reviewed. Focal Group Discussion and Key Informant Survey were also done. Descriptive statistics, unpaired t-test, probit regression and indexing were used for data analysis using statist...

  2. Exploring the Stakeholders Salience for the adoption the Principles and Tools of Cleaner Production in Brazil Companies

    Directory of Open Access Journals (Sweden)

    Geraldo Cardoso Oliveira Neto

    2015-09-01

    Full Text Available Objective – The key objective of this paper is to show the primary environmental influences exerted by the government, economic agents and society on companies for the implementation of the principles and tools of cleaner production (CP, and the attributes (power, legitimacy and urgency used by stakeholders to coerce companies into adopting these principles. Design/methodology/approach – The research method employed was the application of an exploratory survey in 102 Brazilian companies and the multi-varied evaluation of data by means of multiple correspondent analysis. Findings – The study shows that some principles of CP are little used by companies in Brazil. Concerning the influences on the adoption of CP, the government, economic agents and society are singled out as the important influencers. The government influence is manifest through the adoption of environmental regulating measures (power in conjunction with sincere actions in environmental education (influence. The economic agents possess the power, legitimacy and urgency to influence the adoption of CP. Society’s influences are less relevant, in that Brazilian society has much less awareness of sustainable production and consumption as compared to other countries. Practical implications – This study shows that it is vital that Brazilian society learns more about sustainable production, because a society with no environmental conscience is a society with little means to demand the implementation of CP. Originality/value – The results of the study represent an important theoretical contribution in that, at present, there is little literature on the relationship between stakeholders and Cleaner Production. This is the first study in Brazil to address the subject.

  3. Ethanol production by extractive fermentation - Process development and technology transfer

    International Nuclear Information System (INIS)

    Daugulis, A.J.; Axford, D.B.; Mau, T.K.

    1991-01-01

    Extractive Fermentation is an ethanol processing strategy in which the operations of fermentation and product recovery are integrated and undertaken simultaneously in a single step. In this process an inert and biocompatible organic solvent is introduced directly into the fermentation vessel to selectively extract the ethanol product. The ethanol is readily recovered from the solvent at high concentration by means of flash vaporization, and the solvent is recycled in a closed loop back to the fermentor. This process is characterized by a high productivity (since ethanol does not build up to inhibitory levels), continuous operation, significantly reduced water consumption, and lower product recovery costs. The technical advantages of this processing strategy have been extensively demonstrated by means of a continuous, fully integrated and computer-controlled Process Demonstration Unit in the authors' laboratory. Numerous features of this technology have been protected by US patent. A thorough economic comparison of Extractive Fermentation relative to modern ethanol technology (continuous with cell recycle) has been completed for both new plants and retrofitting of existing facilities for a capacity of 100 million liters of ethanol per year. Substantial cost savings are possible with Extractive Fermentation ranging, depending on the process configuration, from 5 cents to 16 cents per liter. Activities are under way to transfer this proprietary technology to the private sector

  4. Automatic system of production, transfer and processing of coin targets for the production of metallic radioisotopes

    Science.gov (United States)

    Pellicioli, M.; Ouadi, A.; Marchand, P.; Foehrenbacher, T.; Schuler, J.; Dick-Schuler, N.; Brasse, D.

    2017-05-01

    The work presented in this paper gathers three main technical developments aiming at 1) optimizing nuclide production by the mean of solid targets 2) automatically transferring coin targets from vault to hotcell without human intervention 3) processing target dilution and purification in hotcell automatically. This system has been installed on a ACSI TR24 cyclotron in Strasbourg France.

  5. Analysis of Pathogenesis of Autoimmune Insulitis in NOD Mice: Adoptive Transfer Experiments of Insulitis in ILI and NOD Nude Mice

    OpenAIRE

    Nakamura, Moritaka; Nishimura, Masahiko; Koide, Yukio; Takato, O.Yoshida

    2003-01-01

    In an effort to study the pathophysiological events in the development of insulitis in NOD mice, we have developed ILI- and NOD-nu/nu mice. ILI mice are a nondiabetic inbred strain but are derived from the same Jcl:ICR mouse as NOD mice and share the same H-2 allotype with NOD mice. Splenocytes and CD4+ cells from diabetic NOD mice appeared to transfer insulitis to ILI-nu/nu mice, suggesting that ILI mice already express autoantigen(s) responsible for insulitis. But reciprocal thymic grafts f...

  6. Seeking perfection in healthcare. A case study in adopting Toyota Production System methods.

    Science.gov (United States)

    Kaplan, Gary S; Patterson, Sarah H

    2008-01-01

    Virginia Mason Health System's vision to be the quality leader in healthcare means continually adopting new ways of thinking. One change has been shifting from believing defects are to be expected to believing zero defects in healthcare is not only possible, but also necessary. Generally, healthcare has advanced in technology and understanding of disease, but its business and management systems have changed little since the 1950s. Virginia Mason realized it needed a management method to help make real and measurable improvements in safety, quality, service and staff satisfaction.

  7. Transfer matrices and excitations with matrix product states

    International Nuclear Information System (INIS)

    Zauner, V; Rams, M M; Verstraete, F; Draxler, D; Vanderstraeten, L; Degroote, M; Haegeman, J; Stojevic, V; Schuch, N

    2015-01-01

    We use the formalism of tensor network states to investigate the relation between static correlation functions in the ground state of local quantum many-body Hamiltonians and the dispersion relations of the corresponding low-energy excitations. In particular, we show that the matrix product state transfer matrix (MPS-TM)—a central object in the computation of static correlation functions—provides important information about the location and magnitude of the minima of the low-energy dispersion relation(s), and we present supporting numerical data for one-dimensional lattice and continuum models as well as two-dimensional lattice models on a cylinder. We elaborate on the peculiar structure of the MPS-TM’s eigenspectrum and give several arguments for the close relation between the structure of the low-energy spectrum of the system and the form of the static correlation functions. Finally, we discuss how the MPS-TM connects to the exact quantum transfer matrix of the model at zero temperature. We present a renormalization group argument for obtaining finite bond dimension approximations of the MPS, which allows one to reinterpret variational MPS techniques (such as the density matrix renormalization group) as an application of Wilson’s numerical renormalization group along the virtual (imaginary time) dimension of the system. (paper)

  8. Eager sellers and stony buyers: understanding the psychology of new-product adoption.

    Science.gov (United States)

    Gourville, John T

    2006-06-01

    Companies that introduce new innovations are the most likely to flourish, so they spend billions of dollars making better products. But studies show that new innovations fail at a staggering rate. While many blame these misses on lackluster products, the reality isn't so simple. The goods that consumers dismiss often do offer improvements over existing ones. So why don't people purchase them? And why do companies keep peddling products that buyers are likely to reject? The answer, says the author, can be found in the brain. New products force consumers to change their behavior, and that has a psychological cost. Many products fail because people irrationally over-value the benefits of the goods they own over those they don't possess. Executives, meanwhile, overvalue their own innovations. This leads to a serious clash. Studies show, in fact, that there is a mismatch of nine to one, or 9x, between what innovators think consumers want and what consumers truly desire. Fortunately, companies can overcome this disconnect. To start, they can determine where their products fall in a matrix with four categories: easy sells, sure failures, long hauls, and smash hits. Each has a different ratio of product improvement to change required from the consumer. Once businesses know where their products fit into this grid, they can manage the resistance to change. For some innovations, major behavior change is a given. In those cases, companies can either wait for consumers to warm to the product, make the improvement so great that buyers get past their apprehension, or try to eliminate the incumbent product. Firms can also try to minimize buyer resistance by making products that are compatible with incumbent goods, seeking out those who are not yet users of the existing product, or finding true believers.

  9. Spin-directed momentum transfers in SIDIS baryon production

    International Nuclear Information System (INIS)

    Sivers, D.

    2016-01-01

    The measurement of transverse single-spin asymmetries for baryon production in the target fragmentation region of semi-inclusive deep-inelastic scattering (SIDIS), can produce important insight into those nonperturbative aspects of QCD directly associated with confinement and with the dynamical breaking of chiral symmetry. We discuss here, in terms of spin-directed momentum transfers, the powerful quantum field- theoretical constraints on the spin-orbit dynamics underlying these transverse spin observables. The A τ -odd spin-directed momentum shifts, originating either in the target nucleon (δk TN ) or in the QCD jets (δp TN ) produced in the deep inelastic scattering process, represent significant quantum entanglement effects connecting information from current fragmentation with observables in target fragmentation. (author)

  10. Production of actinide nuclei by multi-nucleon transfer

    Energy Technology Data Exchange (ETDEWEB)

    Lauritsen, T.; Ahmad, I.; Carpenter, M.P. [and others

    1995-08-01

    Multi-nucleon transfers have increasingly allowed us to reach parts of the nuclear chart where regular compound nuclear reactions are prohibited. The interesting region of Ra and Rn, where a rich tapestry of nuclear structure manifests itself, is now accessible using this technique of deep inelastic scattering. In particular, these nuclei are predicted to lie at the onset of octupole deformation and the region is rich in examples of shape coexistence. There are several theoretical predictions of nuclear structure of these nuclei that have not been experimentally tested. Moreover, there is serious disagreement among these theories. We used a beam of {sup 136}Xe at 720 MeV from ATLAS on a target of {sup 232}Th to produce a range of Rn isotopes, with a mass from 220 to 224, and Ra isotopes with masses greater than 222. The beam energy, target and beam were selected carefully to enhance the cross-section for production of these nuclei and reduce the Doppler broadening of the gamma rays that were observed in the Argonne Notre Dame gamma-ray facility. The 12 germanium detectors of this array allowed the observation of gamma-gamma coincidences. The inner ball of 50 BGO detectors allowed us to record the multiplicity and sum-energy information for each event. The latter should permit us to determine the entry region in the products of the transfer reaction. We had four successful days of beam-time, when we collected in excess of 8 x 10{sup 7} events. Data analysis is in progress at the University of Liverpool. A complete set of spectroscopic information on the yrast structure of the many nuclei produced in this reaction is being extracted.

  11. Antibody responses to allergen Lol pIV are suppressed following adoptive transfer of B lymphocytes from the internal image anti-idiotypic antibody-treated mice.

    Science.gov (United States)

    Zhou, E M; Kisil, F T

    1995-10-01

    An internal image anti-idiotypic antibody, designated B1/1, was generated against an idiotope (Id91) of the monoclonal antibody (mAb91) specific for Lol pIV. The administration of B1/1 in PBS, at doses ranging from 100 ng to 100 micrograms/mouse, to syngeneic Balb/c mice resulted in the suppression of the formation of anti-Lol pIV antibodies that possessed the Id91. Spleen cells obtained from the mice 2 weeks after the treatment with B1/1 (25 micrograms/mouse) were adoptively transferred intravenously into the syngeneic recipients which were challenged intraperitoneally with Lol pIV in alum 2 hr after the transfer. The recipients were boosted with Lol pIV 14 days later. It was demonstrated that the transfer of splenic B cells (but not of T cells) from B1/1-treated donors induced a significant suppression of not only the level of IgE and IgG antibodies to Lol pIV, but also the level of antibodies possessing the Id91. Treatment of the B cells with mAb91 plus complement abrogated their ability to transfer the suppression. This study indicates that the treatment with the anti-Id B1/1 generated B cells that were characterized, serologically, as possessing the anti-Id-like antibodies on their surface and were responsible for transferring the suppression of the formation of antibodies to allergen Lol pIV and the expression of Id91.

  12. Determinant of Adoption Pattern of New Product/Services in Hotel ...

    African Journals Online (AJOL)

    In light of the intense competition facing the providers of hotel services/product, some managers are constantly engaged in the creation of new products that would hopefully win consumers acceptance. However, against a backdrop of changing technology and sophisticated consumer wants, inventing a successful ...

  13. Risk Adjusted Production Efficiency of Maize Farmers in Ethiopia: Implication for Improved Maize Varieties Adoption

    Directory of Open Access Journals (Sweden)

    Sisay Diriba Lemessa

    2017-09-01

    Full Text Available This study analyzes the technical efficiency and production risk of 862 maize farmers in major maize producing regions of Ethiopia. It employs the stochastic frontier approach (SFA to estimate the level of technical efficiencies of stallholder farmers. The stochastic frontier approach (SFA uses flexible risk properties to account for production risk. Thus, maize production variability is assessed from two perspectives, the production risk and the technical efficiency. The study also attempts to determine the socio-economic and farm characteristics that influence technical efficiency of maize production in the study area. The findings of the study showed the existence of both production risk and technical inefficiency in maize production process. Input variables (amounts per hectare such as fertilizer and labor positively influence maize output. The findings also show that farms in the study area exhibit decreasing returns to scale. Fertilizer and ox plough days reduce output risk while labor and improved seed increase output risk. The mean technical efficiency for maize farms is 48 percent. This study concludes that production risk and technical inefficiency prevents the maize farmers from realizing their frontier output. The best factors that improve the efficiency of the maize farmers in the study area include: frequency of extension contact, access to credit and use of intercropping. It was also realized that altitude and terracing in maize farms had influence on farmer efficiency.

  14. Adoption of Falsified Medical Products in a Low-Income Country : Empirical Evidence for Suriname

    NARCIS (Netherlands)

    Ph.H.B.F. Franses (Philip Hans); M.M. Lede (Madesta)

    2017-01-01

    markdownabstractBased on detailed shipping figures for Suriname’s main harbour in Paramaribo, we estimate the total shipments (in kilograms) of original and falsified medical products for 1996–2008 across five product categories. Using various time series techniques and diffusion models, we document

  15. Orodispersible films: Product transfer from lab-scale to continuous manufacturing.

    Science.gov (United States)

    Thabet, Yasmin; Breitkreutz, Joerg

    2018-01-15

    Orodispersible films have been described as new beneficial dosage forms for special patient populations. Due to various production settings, different requirements on film formulations are required for non- continuous and continuous manufacturing. In this study, a continuous coating machine was qualified in regards of the process conditions for film compositions and their effects on the formed films. To investigate differences between both manufacturing processes, various film formulations of hydrochlorothiazide and hydroxypropylcellulose (HPC) or hydroxypropylmethycellulose (HPMC) as film formers were produced and the resulting films were characterized. The qualification of the continuously operating coating machine reveals no uniform heat distribution during drying. Coating solutions for continuous manufacturing should provide at least a dynamic viscosity of 1 Pa*s (wet film thickness of 500 μm, velocity of 15.9 cm/min). HPC films contain higher residuals of ethanol or acetone in bench-scale than in continuous production mode. Continuous production lead to lower drug content of the films. All continuously produced films disintegrate within less than 30 s. There are observed significant effects of the production process on the film characteristics. When transferring film manufacturing from lab-scale to continuous mode, film compositions, processing conditions and suitable characterization methods have to be carefully selected and adopted. Copyright © 2017 Elsevier B.V. All rights reserved.

  16. Technology Awareness and Farmers Perception in Adoption of Wheat Production Technologies: Case Study in Njoro and Rongai Divisions

    International Nuclear Information System (INIS)

    Ndiema, A.C.

    2002-01-01

    Wheat is the second most important cereal crop in Kenya but its production has not been able to meet high demand, since production is only fifty percent. The shortfall is supplemented by importation. The purpose of this study was to assess and describe farmers' perception on adoption of wheat production technologies in Njoro and Rongai divisions. One hundred and fifty (150) wheat farmers were randomly selected using stratified proportional random sampling technique. The data was analysed using descriptive and inferential statistics. farmers perception in wheat production is favourable with 80.2% agreeing that it access to credits by farmers. This was only possible to 7.3% of the farmers. above 90% of the farmers in the two divisions exist. Farmers' perception for small-scale 3.25% as higher than 2.75% for large-scale wheat farmers with t-test-2.21 at α=0.05 for pest and disease control.s Education level and farm size significantly affected adoption, while gender and age were not significant

  17. Understanding investors' decisions to purchase innovative products : Drivers of adoption timing and range

    NARCIS (Netherlands)

    Hoffmann, A.O.I.; Broekhuizen, T.L.J.

    2010-01-01

    This paper integrates findings from marketing and finance literature to increase our understanding of consumers' decisions to purchase innovative investment products. Two different surveys administered to individual investors examine the psychological and sociological drivers of dispositional

  18. Improving the Safety of Cell Therapy Products by Suicide Gene Transfer

    Directory of Open Access Journals (Sweden)

    Antonio eDi Stasi

    2014-11-01

    Full Text Available Adoptive T-cell therapy can involve donor lymphocyte infusion (DLI after allogeneic hematopoietic stem cell transplantation, the administration of tumor infiltrating lymphocyte (TILs expanded ex-vivo, or more recently the use of T cell receptor (TCR or chimeric antigen receptor (CAR redirected T cells. However cellular therapies can pose significant risks, including graft-versus-host-disease and other on and off-target effects, and therefore strategies need to be implemented to permanently reverse any sign of toxicity. A suicide gene is a genetically encoded molecule that allows selective destruction of adoptively transferred cells. Suicide gene addition to cellular therapeutic products can lead to selective ablation of gene-modified cells, preventing collateral damage to contiguous cells and/or tissues. The ‘ideal’ suicide gene would ensure the safety of gene modified cellular applications by granting irreversible elimination of ‘all’ and ‘only’ the cells responsible for the unwanted toxicity. This review presents the suicide gene safety systems reported to date, with a focus on the state-of-the-art and potential applications regarding two of the most extensively validated suicide genes, including the clinical setting: herpes-simplex-thymidine-kinase (HSV-TK and inducible-caspase-9 (iCasp9.

  19. Founding weaver ant queens (Oecophylla longinoda) increase production and nanitic worker size when adopting non-nestmate pupae

    DEFF Research Database (Denmark)

    Ouagoussounon, Issa; Offenberg, Joachim; Sinzogan, Antonio

    2015-01-01

    Weaver ants (Oecophylla longinoda Latreille) are used commercially to control pest insects and for protein production. In this respect fast colony growth is desirable for managed colonies. Transplantation of non-nestmate pupae to incipient colonies has been shown to boost colony growth. Our...... of 300 pupae increased total colony size more than 10-fold whereas 100 pupae increased the size 5.6 fold, compared to control. This increase was due not only to the individuals added in the form of pupae but also to an increased per capita brood production by the resident queen, triggered by the adopted...... objectives were to find the maximum number of pupae a founding queen can handle, and to measure the associated colony growth. Secondly, we tested if transplantation of pupae led to production of larger nanitic workers (defined as unusually small worker ants produced by founding queens in their first batch...

  20. Overcoming Production Disruption When Adopting New Technologies: Application of Macroergonomics and Safety Culture

    Energy Technology Data Exchange (ETDEWEB)

    Naca, Christine L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Rempel, David M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Imada, Andy S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Alexandre, Melanie A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Janowitz, Ira L. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-11-30

    Organizations are constantly responding to new technologies that require an appropriate response to remain competitive. Depending on the nature of the technologic changes, incremental changes may be adequate. However, at some point, the technical demands may be disruptive because the organization is unable to respond adequately. In this case study of a biotechnology production facility, rapidly changing customer and technological demands created a crisis manifested in rising employee injuries and production interruptions. The crisis was ultimately addressed through a comprehensive redesign of human-system relationships. Key ingredients included: a management willing to examine the entire production system, a multidisciplinary team coordinating efforts towards a common goal, engagement of staff at all levels of the organization, and the creation of feedback channels to better guide the actions of supervisors and managers. The methods used in this successful case study, involving a macroergonomics approach, can be applied to any private or public enterprise.

  1. Fission Product Transport Models Adopted in REFPAC Code for LOCA Conditions in PWR and WWER NPPS

    International Nuclear Information System (INIS)

    Strupczewski, A.

    2003-01-01

    The report presents assumptions and physical models used for calculations of fission product releases from nuclear reactors, their behavior inside the containment and leakages to the environment after large break loss of coolant accident LB LOCA. They are the basis of code REFPAC (RElease of Fission Products under Accident Conditions), designed primarily to represent significant physical processes occurring after LB LOCA. The code describes these processes using three different models. Model 1 corresponds to established US and Russian practice, Model 2 includes all conservative assumptions that are in agreement with the actual state-of-the-art, and Model 3 incorporates formulae and parameter values actually used in EU practice. (author)

  2. Transfer Study of Silver Nanoparticles in Poultry Production.

    Science.gov (United States)

    Gallocchio, Federica; Biancotto, Giancarlo; Cibin, Veronica; Losasso, Carmen; Belluco, Simone; Peters, Ruud; van Bemmel, Greet; Cascio, Claudia; Weigel, Stefan; Tromp, Peter; Gobbo, Federica; Catania, Salvatore; Ricci, Antonia

    2017-05-10

    Silver nanoparticles (AgNPs) are of interest due to their antimicrobial activity and are seen as potential candidates to replace antibiotics in animal husbandry. A few studies have focused on this new application, but they lack any considerations about residual accumulation of AgNPs in edible animal tissues and animal products. In this research, a 22 day in vivo study was carried out by oral administration of 20 nm spherical PVP coated AgNPs to hens. Six doses of approximately 1 mg kg -1 of AgNPs-PVP each were administered to animals throughout the experimentation. Atomic absorption spectroscopy (AAS) was used for quantitative determination of residual total Ag in different organs and matrices. The analyses showed that Ag accumulates in livers (concentration ranging from 141 μg kg -1 to 269 μg kg -1 ) and yolks (concentration ranging from 20 μg kg -1 to 49 μg kg -1 ) but not in muscles, kidneys, and albumen belonging to hens of the treated group (tG2). Ag was not detected in animals of the control group (uG1) (i.e., total Ag animals. spICP-MS highlighted that part of residual Ag found in livers (about 5-20%) is in NP form with an average dimension of approximately 20 nm. SEM-EDX technique confirmed the presence of AgNPs only in livers of treated animals. The results show that feeding AgNPs to hens may become a source of consumer exposure to AgNPs. As far as we know this is the first study showing transfer of AgNPs or reaction products thereof from animal feed to animal products.

  3. K-shell-hole production, multiple-hole production, charge transfer, and antisymmetry

    International Nuclear Information System (INIS)

    Reading, J.F.; Ford, A.L.

    1980-01-01

    In calculating K-shell-hole production when an ion collides with an atom, account must be taken of the fact that processes involving electrons other than the K-shell electron can occur. For example, after making a K-shell hole an L-shell electron may be knocked into it, or an L-shell vacancy may be produced and the K-shell electron promoted to that vacancy in the ''Fermi sea'' of the target-atom orbitals. In 1973 a theorem was proved by one of the present authors demonstrating that all these multielectron processes cancel in an independent-particle model for the target atom. In this paper it is shown that the same thing occurs for hole production by charge transfer to the ion. The authors demonstrate that multihole production does not obey this simple rule and that the probability for multihole production is not the product of independent single-electron probabilities. The correct expressions that should be used for these processes are given, together with new results for charge-transfer processes accompanied by hole production

  4. Founding weaver ant queens (Oecophylla longinoda) increase production and nanitic worker size when adopting non-nestmate pupae.

    Science.gov (United States)

    Ouagoussounon, Issa; Offenberg, Joachim; Sinzogan, Antonio; Adandonon, Appolinaire; Kossou, Dansou; Vayssières, Jean-François

    2015-01-01

    Weaver ants (Oecophylla longinoda Latreille) are used commercially to control pest insects and for protein production. In this respect fast colony growth is desirable for managed colonies. Transplantation of non-nestmate pupae to incipient colonies has been shown to boost colony growth. Our objectives were to find the maximum number of pupae a founding queen can handle, and to measure the associated colony growth. Secondly, we tested if transplantation of pupae led to production of larger nanitic workers (defined as unusually small worker ants produced by founding queens in their first batch of offspring). Forty-five fertilized queens were divided into three treatments: 0 (control), 100 or 300 non-nestmate pupae transplanted to each colony. Pupae transplantation resulted in highly increased growth rates, as pupae were readily adopted by the queens and showed high proportions of surviving (mean = 76%). However, survival was significantly higher when 100 pupae were transplanted compared to transplantation of 300 pupae, indicating that queens were unable to handle 300 pupae adequately and that pupae require some amount of nursing. Nevertheless, within the 60-day experiment the transplantation of 300 pupae increased total colony size more than 10-fold whereas 100 pupae increased the size 5.6 fold, compared to control. This increase was due not only to the individuals added in the form of pupae but also to an increased per capita brood production by the resident queen, triggered by the adopted pupae. The size of hatching pupae produced by the resident queen also increased with the number of pupae transplanted, leading to larger nanitic workers in colonies adopting pupae. In conclusion, pupae transplantation may be used to produce larger colonies with larger worker ants and may thus reduce the time to produce weaver ant colonies for commercial purposes. This in turn may facilitate the implementation of the use of weaver ants.

  5. Productivity and household welfare impact of technology adoption: Micro-level evidence from rural Ethiopia

    NARCIS (Netherlands)

    Mekonnen Melesse, Tigist

    2017-01-01

    This study evaluates the potential impact of improved agricultural technologies on smallholders’ crop productivity and welfare. We use household-level data from Ethiopian Rural Household Survey collected by IFPRI in 1989-2009. The survey covers around 1500 rural households drawn from four regions

  6. Intestinal barrier dysfunction develops at the onset of experimental autoimmune encephalomyelitis, and can be induced by adoptive transfer of auto-reactive T cells.

    Directory of Open Access Journals (Sweden)

    Mehrnaz Nouri

    Full Text Available Multiple sclerosis (MS is a chronic inflammatory demyelinating disease of the central nervous system with a pathogenesis involving a dysfunctional blood-brain barrier and myelin-specific, autoreactive T cells. Although the commensal microbiota seems to affect its pathogenesis, regulation of the interactions between luminal antigens and mucosal immune elements remains unclear. Herein, we investigated whether the intestinal mucosal barrier is also targeted in this disease. Experimental autoimmune encephalomyelitis (EAE, the prototypic animal model of MS, was induced either by active immunization or by adoptive transfer of autoreactive T cells isolated from these mice. We show increased intestinal permeability, overexpression of the tight junction protein zonulin and alterations in intestinal morphology (increased crypt depth and thickness of the submucosa and muscularis layers. These intestinal manifestations were seen at 7 days (i.e., preceding the onset of neurological symptoms and at 14 days (i.e., at the stage of paralysis after immunization. We also demonstrate an increased infiltration of proinflammatory Th1/Th17 cells and a reduced regulatory T cell number in the gut lamina propria, Peyer's patches and mesenteric lymph nodes. Adoptive transfer to healthy mice of encephalitogenic T cells, isolated from EAE-diseased animals, led to intestinal changes similar to those resulting from the immunization procedure. Our findings show that disruption of intestinal homeostasis is an early and immune-mediated event in EAE. We propose that this intestinal dysfunction may act to support disease progression, and thus represent a potential therapeutic target in MS. In particular, an increased understanding of the regulation of tight junctions at the blood-brain barrier and in the intestinal wall may be crucial for design of future innovative therapies.

  7. Efficient tumor regression by adoptively transferred CEA-specific CAR-T cells associated with symptoms of mild cytokine release syndrome.

    Science.gov (United States)

    Wang, Linan; Ma, Ning; Okamoto, Sachiko; Amaishi, Yasunori; Sato, Eiichi; Seo, Naohiro; Mineno, Junichi; Takesako, Kazutoh; Kato, Takuma; Shiku, Hiroshi

    2016-01-01

    Carcinoembryonic antigen (CEA) is a cell surface antigen highly expressed in various cancer cell types and in healthy tissues. It has the potential to be a target for chimeric antigen receptor (CAR)-modified T-cell therapy; however, the safety of this approach in terms of on-target/off-tumor effects needs to be determined. To address this issue in a clinically relevant model, we used a mouse model in which the T cells expressing CEA-specific CAR were transferred into tumor-bearing CEA-transgenic (Tg) mice that physiologically expressed CEA as a self-antigen. The adoptive transfer in conjunction with lymphodepleting and myeloablative preconditioning mediated significant tumor regression but caused weight loss in CEA-Tg, but not in wild-type mice. The weight loss was not associated with overt inflammation in the CEA-expressing gastrointestinal tract but was associated with malnutrition, reflected in elevated systemic levels of cytokines linked to anorexia, which could be controlled by the administration of an anti-IL-6 receptor monoclonal antibody without compromising efficacy. The apparent relationship between lymphodepleting and myeloablative preconditioning, efficacy, and off-tumor toxicity of CAR-T cells would necessitate the development of CEA-specific CAR-T cells with improved signaling domains that require less stringent preconditioning for their efficacy. Taken together, these results suggest that CEA-specific CAR-based adoptive T-cell therapy may be effective for patients with CEA + solid tumors. Distinguishing the fine line between therapeutic efficacy and off-tumor toxicity would involve further modifications of CAR-T cells and preconditioning regimens.

  8. Intestinal Barrier Dysfunction Develops at the Onset of Experimental Autoimmune Encephalomyelitis, and Can Be Induced by Adoptive Transfer of Auto-Reactive T Cells

    Science.gov (United States)

    Nouri, Mehrnaz; Bredberg, Anders; Weström, Björn; Lavasani, Shahram

    2014-01-01

    Multiple sclerosis (MS) is a chronic inflammatory demyelinating disease of the central nervous system with a pathogenesis involving a dysfunctional blood-brain barrier and myelin-specific, autoreactive T cells. Although the commensal microbiota seems to affect its pathogenesis, regulation of the interactions between luminal antigens and mucosal immune elements remains unclear. Herein, we investigated whether the intestinal mucosal barrier is also targeted in this disease. Experimental autoimmune encephalomyelitis (EAE), the prototypic animal model of MS, was induced either by active immunization or by adoptive transfer of autoreactive T cells isolated from these mice. We show increased intestinal permeability, overexpression of the tight junction protein zonulin and alterations in intestinal morphology (increased crypt depth and thickness of the submucosa and muscularis layers). These intestinal manifestations were seen at 7 days (i.e., preceding the onset of neurological symptoms) and at 14 days (i.e., at the stage of paralysis) after immunization. We also demonstrate an increased infiltration of proinflammatory Th1/Th17 cells and a reduced regulatory T cell number in the gut lamina propria, Peyer's patches and mesenteric lymph nodes. Adoptive transfer to healthy mice of encephalitogenic T cells, isolated from EAE-diseased animals, led to intestinal changes similar to those resulting from the immunization procedure. Our findings show that disruption of intestinal homeostasis is an early and immune-mediated event in EAE. We propose that this intestinal dysfunction may act to support disease progression, and thus represent a potential therapeutic target in MS. In particular, an increased understanding of the regulation of tight junctions at the blood-brain barrier and in the intestinal wall may be crucial for design of future innovative therapies. PMID:25184418

  9. Adoptive parenting.

    Science.gov (United States)

    Grotevant, Harold D; Lo, Albert Yh

    2017-06-01

    Challenges in adoptive parenting continue to emerge as adoption policies and practices evolve. We review three areas of research in adoptive parenting that reflect contemporary shifts in adoption. First, we highlight recent findings concerning openness in adoption contact arrangements, or contact between a child's families of birth and rearing. Second, we examine research regarding racial and cultural socialization in transracial and international adoptions. Finally, we review investigations of parenting experiences of lesbian and gay adoptive parents. Overall, parenting processes (e.g., supportive vs. problematic family interaction) are better predictors of child adjustment than are group differences (e.g., open vs. closed adoptions; adoption by heterosexual vs. same-sex parents). The distinctive needs of adopted children call for preparation of adoption-competent mental health, casework, education, and health care professionals. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Program death-1 signaling and regulatory T cells collaborate to resist the function of adoptively transferred cytotoxic T lymphocytes in advanced acute myeloid leukemia.

    Science.gov (United States)

    Zhou, Qing; Munger, Meghan E; Highfill, Steven L; Tolar, Jakub; Weigel, Brenda J; Riddle, Megan; Sharpe, Arlene H; Vallera, Daniel A; Azuma, Miyuki; Levine, Bruce L; June, Carl H; Murphy, William J; Munn, David H; Blazar, Bruce R

    2010-10-07

    Tumor-induced immune defects can weaken host immune response and permit tumor cell growth. In a systemic model of murine acute myeloid leukemia (AML), tumor progression resulted in increased regulatory T cells (Treg) and elevation of program death-1 (PD-1) expression on CD8(+) cytotoxic T cells (CTLs) at the tumor site. PD-1 knockout mice were more resistant to AML despite the presence of similar percentage of Tregs compared with wild type. In vitro, intact Treg suppression of CD8(+) T-cell responses was dependent on PD-1 expression by T cells and Tregs and PD-L1 expression by antigen-presenting cells. In vivo, the function of adoptively transferred AML-reactive CTLs was reduced by AML-associated Tregs. Anti-PD-L1 monoclonal antibody treatment increased the proliferation and function of CTLs at tumor sites, reduced AML tumor burden, and resulted in long-term survivors. Treg depletion followed by PD-1/PD-L1 blockade showed superior efficacy for eradication of established AML. These data demonstrated that interaction between PD-1 and PD-L1 can facilitate Treg-induced suppression of T-effector cells and dampen the antitumor immune response. PD-1/PD-L1 blockade coupled with Treg depletion represents an important new approach that can be readily translated into the clinic to improve the therapeutic efficacy of adoptive AML-reactive CTLs in advanced AML disease.

  11. Adoptively transferred human lung tumor specific cytotoxic T cells can control autologous tumor growth and shape tumor phenotype in a SCID mouse xenograft model

    Directory of Open Access Journals (Sweden)

    Ferrone Soldano

    2007-06-01

    Full Text Available Abstract Background The anti-tumor efficacy of human immune effector cells, such as cytolytic T lymphocytes (CTLs, has been difficult to study in lung cancer patients in the clinical setting. Improved experimental models for the study of lung tumor-immune cell interaction as well as for evaluating the efficacy of adoptive transfer of immune effector cells are needed. Methods To address questions related to the in vivo interaction of human lung tumor cells and immune effector cells, we obtained an HLA class I + lung tumor cell line from a fresh surgical specimen, and using the infiltrating immune cells, isolated and characterized tumor antigen-specific, CD8+ CTLs. We then established a SCID mouse-human tumor xenograft model with the tumor cell line and used it to study the function of the autologous CTLs provided via adoptive transfer. Results The tumor antigen specific CTLs isolated from the tumor were found to have an activated memory phenotype and able to kill tumor cells in an antigen specific manner in vitro. Additionally, the tumor antigen-specific CTLs were fully capable of homing to and killing autologous tumors in vivo, and expressing IFN-γ, each in an antigen-dependent manner. A single injection of these CTLs was able to provide significant but temporary control of the growth of autologous tumors in vivo without the need for IL-2. The timing of injection of CTLs played an essential role in the outcome of tumor growth control. Moreover, immunohistochemical analysis of surviving tumor cells following CTL treatment indicated that the surviving tumor cells expressed reduced MHC class I antigens on their surface. Conclusion These studies confirm and extend previous studies and provide additional information regarding the characteristics of CTLs which can be found within a patient's tumor. Moreover, the in vivo model described here provides a unique window for observing events that may also occur in patients undergoing adoptive cellular

  12. Distribution of adoptively transferred porcine T-lymphoblasts tracked by 18F-2-fluoro-2-deoxy-D-glucose and position emission tomography

    International Nuclear Information System (INIS)

    Eriksson, Olof; Sadeghi, Arian; Carlsson, Bjoern; Eich, Torsten; Lundgren, Torbjoern; Nilsson, Bo; Toetterman, Thomas; Korsgren, Olle; Sundin, Anders

    2011-01-01

    Introduction: Autologous or allogeneic transfer of tumor-infiltrating T-lymphocytes is a promising treatment for metastatic cancers, but a major concern is the difficulty in evaluating cell trafficking and distribution in adoptive cell therapy. This study presents a method of tracking transfusion of T-lymphoblasts in a porcine model by 18 F-2-fluoro-2-deoxy-D-glucose ([ 18 F]FDG) and positron emission tomography. Methods: T-lymphoblasts were labeled with the positron-emitting tracer [ 18 F]FDG through incubation. The T-lymphoblasts were administered into the bloodstream, and the distribution was followed by positron emission tomography for 120 min. The cells were administered either intravenously into the internal jugular vein (n=5) or intraarterially into the ascending aorta (n=1). Two of the pigs given intravenous administration were pretreated with low-molecular-weight dextran sulphate. Results: The cellular kinetics and distribution were readily quantifiable for up to 120 min. High (78.6% of the administered cells) heterogeneous pulmonary uptake was found after completed intravenous transfusion. The pulmonary uptake was decreased either by preincubating and coadministrating the T-lymphoblasts with low-molecular-weight dextran sulphate or by administrating them intraarterially. Conclusions: The present work shows the feasibility of quantitatively monitoring and evaluating cell trafficking and distribution following administration of [ 18 F]FDG-labeled T-lymphoblasts. The protocol can potentially be transferred to the clinical setting with few modifications.

  13. Distribution of adoptively transferred porcine T-lymphoblasts tracked by {sup 18}F-2-fluoro-2-deoxy-D-glucose and position emission tomography

    Energy Technology Data Exchange (ETDEWEB)

    Eriksson, Olof, E-mail: olof.eriksson@radiol.uu.se [Division of Radiology, Department of Oncology, Radiology, Oncology and Radiation Science, Uppsala University, Uppsala 751 87 (Sweden); Uppsala Imanet AB, GE Healthcare, Uppsala 751 85 (Sweden); Sadeghi, Arian; Carlsson, Bjoern; Eich, Torsten [Division of Immunology, Department of Immunology, Genetics and Pathology, Uppsala University, Uppsala 751 87 (Sweden); Lundgren, Torbjoern [Division of Transplantation Surgery, CLINTEC, Karolinska Institute, Stockholm 171 77 (Sweden); Nilsson, Bo; Toetterman, Thomas; Korsgren, Olle [Division of Immunology, Department of Immunology, Genetics and Pathology, Uppsala University, Uppsala 751 87 (Sweden); Sundin, Anders [Division of Radiology, Department of Oncology, Radiology, Oncology and Radiation Science, Uppsala University, Uppsala 751 87 (Sweden); Department of Radiology, Karolinska University Hospital and Molecular Medicine and Surgery, Karolinska Institute, Stockholm 171 77 (Sweden)

    2011-08-15

    Introduction: Autologous or allogeneic transfer of tumor-infiltrating T-lymphocytes is a promising treatment for metastatic cancers, but a major concern is the difficulty in evaluating cell trafficking and distribution in adoptive cell therapy. This study presents a method of tracking transfusion of T-lymphoblasts in a porcine model by {sup 18}F-2-fluoro-2-deoxy-D-glucose ([{sup 18}F]FDG) and positron emission tomography. Methods: T-lymphoblasts were labeled with the positron-emitting tracer [{sup 18}F]FDG through incubation. The T-lymphoblasts were administered into the bloodstream, and the distribution was followed by positron emission tomography for 120 min. The cells were administered either intravenously into the internal jugular vein (n=5) or intraarterially into the ascending aorta (n=1). Two of the pigs given intravenous administration were pretreated with low-molecular-weight dextran sulphate. Results: The cellular kinetics and distribution were readily quantifiable for up to 120 min. High (78.6% of the administered cells) heterogeneous pulmonary uptake was found after completed intravenous transfusion. The pulmonary uptake was decreased either by preincubating and coadministrating the T-lymphoblasts with low-molecular-weight dextran sulphate or by administrating them intraarterially. Conclusions: The present work shows the feasibility of quantitatively monitoring and evaluating cell trafficking and distribution following administration of [{sup 18}F]FDG-labeled T-lymphoblasts. The protocol can potentially be transferred to the clinical setting with few modifications.

  14. The Danish Adoption Register.

    Science.gov (United States)

    Petersen, Liselotte; Sørensen, Thorkild I A

    2011-07-01

    The Danish Adoption Register was established in 1963-1964 to explore the genetic and environmental contribution to familial aggregation of schizophrenia. The register encompass information on all 14,425 non-familial adoptions of Danish children legally granted in Denmark 1924-1947. It includes name and date of birth of each adoptee and his or her biological and adoptive parents, date of transfer to adoptive parents and date of formal adoption. The linkage to biological and adoptive parents is close to complete, even biological fathers are registered for 91.4% of the adoptees. Adoption registers are a unique source allowing disentangling of genetic and familial environmental influences on traits, risk of diseases, and mortality.

  15. Candidate coffee reference material for element content: production and certification schemes adopted at CENA/USP

    Energy Technology Data Exchange (ETDEWEB)

    Tagliaferro, Fabio Sileno; Fernandes, Elisabete A. de Nadai; Bacchi, Marcio Arruda; Franca, Elvis Joacir de [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil). Lab. de Radioisotopos], e-mail: fabiotag@cena.usp.br, e-mail: lis@cena.usp.br, e-mail: mabacchi@cena.usp.br, e-mail: ejfranca@cena.usp.br; Bode, Peter; Bacchi, Marcio Arruda; Franca, Elvis Joacir de [Delft University of Technology, Delft (Netherlands). Interfaculty Reactor Inst.], e-mail: P.Bode@iri.tudelft.nl

    2003-07-01

    Certified reference materials (CRMs) play a fundamental role in analytical chemistry establishing the traceability of measurement results and assuring accuracy and reliability. In spite of the huge importance of measurements in the food sector, Brazil does not produce CRMs to supply the demand. Consequently the acquisition of CRMs depends on imports at high costs. The coffee sector needs CRMs, however there is no material that represents the coffee composition. Since 1998, the Laboratorio de Radioisotopos (LRi) of CENA/USP has been involved in analysis of coffee. During this period, knowledge has been accumulated about several aspects of coffee, such as system of cultivation, elemental composition, homogeneity of the material, possible contaminants and physical properties of beans. Concomitantly, LRi has concentrated efforts in the field of metrology in chemistry, and now all this expertise is being used as the basis for the production of a coffee certified reference material (CRM) for inorganic element content. The scheme developed for the preparation and certification of coffee RM relies on the ISO Guides 34 and 35. The approaches for selection, collection and preparation of the material, moisture determination method, homogeneity testing, certification and long-term stability testing are discussed and a time frame for the expected accomplishments is provided. (author)

  16. The impact and adoption of GLUE 2.0 in the LCG/EGEE production Grid

    International Nuclear Information System (INIS)

    Burke, Stephen; Andreozzi, Sergio; Donno, Flavia; Ehm, Felix; Field, Laurence; Litmaath, Maarten; Millar, Paul

    2010-01-01

    The GLUE information schema has been in use in the LCG/EGEE production Grid since the first version was defined in 2002. In 2007 a major redesign of GLUE, version 2.0, was started in the context of the Open Grid Forum following the creation of the GLUE Working Group. This process has taken input from a number of Grid projects, but as a major user of the version 1 schema LCG/EGEE has had a strong interest that the new schema should support its needs. In this paper we discuss the structure of the new schema in the light of the LCG/EGEE requirements and explain how they are met, and where improvements have been achieved compared with the version 1 schema. In particular we consider some difficulties encountered in recent extensions of the use of the version 1 schema to aid resource accounting in LCG, to enable the use of the SRM version 2 storage protocol by the LHC experiments, and to publish information about a wider range of services to improve service discovery. We describe how these can be better met by the new schema, and we also discuss the way in which the transition to the new schema is being managed.

  17. Candidate coffee reference material for element content: production and certification schemes adopted at CENA/USP

    International Nuclear Information System (INIS)

    Tagliaferro, Fabio Sileno; Fernandes, Elisabete A. de Nadai; Bacchi, Marcio Arruda; Franca, Elvis Joacir de; Bode, Peter; Bacchi, Marcio Arruda; Franca, Elvis Joacir de

    2003-01-01

    Certified reference materials (CRMs) play a fundamental role in analytical chemistry establishing the traceability of measurement results and assuring accuracy and reliability. In spite of the huge importance of measurements in the food sector, Brazil does not produce CRMs to supply the demand. Consequently the acquisition of CRMs depends on imports at high costs. The coffee sector needs CRMs, however there is no material that represents the coffee composition. Since 1998, the Laboratorio de Radioisotopos (LRi) of CENA/USP has been involved in analysis of coffee. During this period, knowledge has been accumulated about several aspects of coffee, such as system of cultivation, elemental composition, homogeneity of the material, possible contaminants and physical properties of beans. Concomitantly, LRi has concentrated efforts in the field of metrology in chemistry, and now all this expertise is being used as the basis for the production of a coffee certified reference material (CRM) for inorganic element content. The scheme developed for the preparation and certification of coffee RM relies on the ISO Guides 34 and 35. The approaches for selection, collection and preparation of the material, moisture determination method, homogeneity testing, certification and long-term stability testing are discussed and a time frame for the expected accomplishments is provided. (author)

  18. Factors that influence in the technology adoption in the production system: Potato - grasses - milk in the east of Antioquia

    International Nuclear Information System (INIS)

    Loaiza Cardenas, A.; Jaramillo Pelaez, J.A.; Quiroz Davila, J.E.; Arevalo Arteaga, M.B.; Rios Carmona, E.A.

    1997-01-01

    With the purpose of knowing the factors that influence in the technology adoption in the system of production potato-grass-milk in the east of Antioquia, it was carried out a study with producing of this system. The study is exploratory, of descriptive type. As study population they took 4.119 producers, of which a sample of 249 producers was selected, using sampling for conglomerates. By means of visits to properties, they were applied a questionnaire, which contained information related with the main variable that is production potato-grass-milk and their different components. Statistical analysis was used as tests of Z for averages and percentages. In accordance with the obtained results, it could settle down that the producers manage 2 very defined systems of production of milk: potato-grass-milk with 45 percent of the producers; alone potato, they exploit it 1 percent of the producers. The producers were changed to the system potato-grass-milk, in the study area for more profitability and with the purpose of improving the herdsmen; on the contrary, those that left the system and they spent to the system grass-milk, they made it for the high costs of potato production and the manpower shortage required for the handling of the system; also, the search of more revenues. The readiness of the manpower is lower for those who manage the system grass-milk that for those of the system potato-grass-milk

  19. Embryo-transfer twinning and performance efficiency in beef production.

    Science.gov (United States)

    Guerra-Martinez, P; Dickerson, G E; Anderson, G B; Green, R D

    1990-12-01

    Effects of twinning on efficiency of beef production were estimated from results of bilateral transfer of two Angus x Hereford (AxH) embryos into each of 241 heifers and 84 cows (H, A, HxA or Holstein x H) over 4 yr. Calves were weaned at 180 d and fed either 220 d in a feedlot (1977) or 170 d on forage and 140 d in a feedlot (1978 to 1980). Effects of parity, twinning and sex of calf were estimated as covariates within year-breed of dam. Pregnancy at 45 to 60 d of gestation was 68% in heifers (H) and 74% in cows (C), with 40% single (S) and 60% twin (T) births. Dystocia was 28% in H vs 10% in C (P less than .05), and tended to be less (P greater than .05) for T than S in H. More placentas were retained (P less than .05) for T than for S in both H (35 vs 12%) and C (24 vs 4%). Twin gestations averaged 3 d shorter and subsequent calving intervals 13 d longer (P less than .05), but total calf mortality was slightly higher (P greater than .05). Abortions were 4% in H only. Twinning females lost maternal weight during late gestation (P less than .05) when crowding limited voluntary feed intake, while fetal requirements were 60% higher (P less than .01). Twins increased milk output 25% (P less than .05), but 11% higher feed intake maintained cow weight during lactation. Twinning reduced birth weight 13% and weaning weight 17% (P less than .05), but 400-d feedlot weight only 9% because of compensating feedlot gain. Twins gained 18% faster than S during postweaning 170-d forage feeding, but 5% slower in feedlot to 8% lighter 490-d weight (P less than .05). Assuming 40% higher veterinary and labor costs for twins, estimated integrated herd costs per unit of age-constant output value would be lower for T than for S production by about 24% for marketing either at weaning or at 400 d.

  20. Ethos of independence across regions in the United States: the production-adoption model of cultural change.

    Science.gov (United States)

    Kitayama, Shinobu; Conway, Lucian Gideon; Pietromonaco, Paula R; Park, Hyekyung; Plaut, Victoria C

    2010-09-01

    Contemporary U.S. culture has a highly individualistic ethos. Nevertheless, exactly how this ethos was historically fostered remains unanalyzed. A new model of dynamic cultural change maintains that sparsely populated, novel environments that impose major threats to survival, such as the Western frontier in the United States during the 18th and 19th centuries, breed strong values of independence, which in turn guide the production of new practices that encourage self-promotion and focused, competitive work. Faced with few significant threats to survival, residents in traditional areas are likely to seek social prestige by adopting existing practices of other, higher status groups. Because of both the massive economic success of the frontier and the official endorsement of the frontier by the federal government, eastern residents of the United States in the 18th and 19th centuries may have actively adopted the frontier practices of independence, thus incorporating the frontier ethos of independence to form the contemporary U.S. national culture. Available evidence is reviewed, and implications for further research on cultural change are suggested. Copyright 2010 APA, all rights reserved.

  1. Transfer prices assignment with integrated production and marketing optimization models

    OpenAIRE

    Enrique Parra

    2018-01-01

    Purpose: In decentralized organizations (today a great majority of the large multinational groups), much of the decision-making power is in its individual business units-BUs-. In these cases, the management control system (MCS) uses transfer prices to coordinate actions of the BUs and to evaluate their performance with the goal of guaranteeing the whole corporation optimum. The purpose of the investigation is to design transfer prices that suit this goal. Design/methodology/approach: Cons...

  2. Barriers to the adoption of low carbon production: A multiple-case study of Chinese industrial firms

    International Nuclear Information System (INIS)

    Liu, Yong

    2014-01-01

    This study employs a multiple-case study method, identifies barriers to the adoption of low carbon production, and categorizes these barriers into four domains: structural, regulatory, cultural, and contextual. The two most frequently mentioned barriers were “lack of financial incentives to stimulate low carbon innovation” and “lack of a common definition of low carbon production”. The two least frequently mentioned barriers were “silos exist between planning and production” and “operational staff are often physically separated from planning staff, which isolates them from planning decisions”. Furthermore, contextual barriers were significantly related to structural and regulatory barriers, while regulatory barriers were significantly related to structural barriers. Larger firms tend to have a more structured organization and lower perceptions of the employment term barrier. However, larger structured organizations have been affected by a long history of a planning-oriented economy and hence tend to have inflexible hierarchical systems. In contrast, small firms have hierarchical systems with less effect on low carbon production than those of large enterprises. Another interesting trend is the direct size effect on cultural barriers, which is evident in a culture of risk aversion, as well as the lack of low carbon technology and the existence of silos between planning and production. - Highlights: • Barriers were categorized as structural, regulatory, cultural and contextual. • Contextual barriers were significantly related to structural and regulatory barriers. • Regulatory barriers were significantly related to structural barriers. • Firm size directly affected firm hierarchical systems and cultural barriers

  3. An analysis of policy scenario effects on the adoption of energy production on the farm: A case study in Emilia–Romagna (Italy)

    International Nuclear Information System (INIS)

    Bartolini, Fabio; Viaggi, Davide

    2012-01-01

    The agriculture sector’s contribution to energy production is a central issue in ongoing policy debates, and one of the central elements of the development of Bioeconomy sector. The Common Agricultural Policy (CAP) is one of the main determinants of the different farm strategies of European farmers. The CAP is now undergoing a thorough revision process which necessarily includes a debate of the role of the policy in rural areas and the effectiveness of the various CAP policy mechanisms. The objective of this paper is to assess the impact of alternative CAP scenarios in the light of the possible changes in 2013 and the willingness to adopt energy plants for energy crops in the Province of Bologna (Italy). This is pursued using both survey information and farm-household mathematical programming models, hence using stated intentions and simulated profitability to analyse the adopt of new technologies for energy production. The results underscore the relevance of the CAP scenarios in altering intentions with regard to the adoption of energy production and the relevant effect of uncertainty in delaying the diffusion of energy production systems. - Highlights: ► We analyse policy effects on adoption of energy production by the farms. ► CAP scenario strongly affects the intention to adopt energy productions. ► Uncertainty in decision variables have the effect to postpone the decision on energy productions.

  4. Bioaccumulation and food chain transfer of corrosion products from radioactive stainless steel

    International Nuclear Information System (INIS)

    Young, J.S.

    1986-07-01

    Two sets of experiments were conducted to determine if corrosion products from radioactive Type 347 stainless steel could be biologically transferred from sediment through a marine food chain, and whether corrosion products dissolved in seawater could be bioaccumulated and then eliminated. Corrosion products containing 60 Co and 63 Ni from the radioactive stainless steel were introduced into marine sediments. Infaunal polychaete worms exposed to these sediments bioaccumulated the radionuclides. The feeding of these worms to shrimp and fish resulted in a trophic transfer of the radioactive products across a one-step food chain. The magnitude of the transfers are described in terms of transfer factors. Dissolved corrosion products as measured by the radionuclides were also bioaccumulated by shrimp and fish concentrating more than fish. Concentration factors were calculated

  5. Transfer

    DEFF Research Database (Denmark)

    Wahlgren, Bjarne; Aarkrog, Vibe

    Bogen er den første samlede indføring i transfer på dansk. Transfer kan anvendes som praksis-filosofikum. Den giver en systematisk indsigt til den studerende, der spørger: Hvordan kan teoretisk viden bruges til at reflektere over handlinger i situationer, der passer til min fremtidige arbejdsplads?...

  6. 76 FR 13000 - Transfer of Commercial First-Class Mail Parcels to Competitive Product List

    Science.gov (United States)

    2011-03-09

    ...: On February 24, 2011, the United States Postal Service[supreg] filed with the Postal Regulatory Commission a Request of the United States Postal Service to transfer commercial First-Class Mail Parcels from... POSTAL SERVICE Transfer of Commercial First-Class Mail Parcels to Competitive Product List AGENCY...

  7. 75 FR 52378 - Transfer of Commercial Standard Mail Parcels to Competitive Product List

    Science.gov (United States)

    2010-08-25

    ..., 2010, the United States Postal Service[reg] filed with the Postal Regulatory Commission a Request of the United States Postal Service to transfer commercial Standard Mail Parcels from the Mail... POSTAL SERVICE Transfer of Commercial Standard Mail Parcels to Competitive Product List AGENCY...

  8. Quantitative modelling to estimate the transfer of pharmaceuticals through the food production system

    NARCIS (Netherlands)

    Chitescu, C.L.; Nicolau, A.I.; Romkens, P.F.A.M.; Fels-Klerx, van der H.J.

    2014-01-01

    Use of pharmaceuticals in animal production may cause an indirect route of contamination of food products of animal origin. This study aimed to assess, through mathematical modelling, the transfer of pharmaceuticals from contaminated soil, through plant uptake, into the dairy food production chain.

  9. Technology transfers, foreign investment and productivity spillovers: evidence from Vietnam

    DEFF Research Database (Denmark)

    Newman, Carol; Rand, John; Talbot, Theodore Purdendu

    FDI through vertical linkages along the supply chain. Our results suggest that domestic firms experience more productivity spillovers through forward linkages from foreign-input suppliers to domestic input users than through backward linkages from foreign customers to domestic producers of inputs......This paper provides new evidence on the relationship between foreign direct investment (FDI) and the productivity of domestic firms. Using a specially designed survey on a sample of over 7,500 manufacturing firms in Vietnam we uncover some of the mechanisms that explain productivity spillovers from...

  10. Differential antibody production by adherent and nonadherent spleen cells transferred to irradiated and cyclophosphamide-treated recipient mice

    International Nuclear Information System (INIS)

    Albright, J.F.; Deitchman, J.W.; Hassell, S.A.; Ozato, K.

    1975-01-01

    Mouse spleen cells were separated into adherent (Ad) and nonadherent (Nad) populations by incubation in plastic petri dishes. Adherent, Nad and unfractionated cell preparations (UCP) were transferred into syngeneic recipient mice that had been either irradiated or cyclophosphamide (CY) treated and the adoptive humoral Ab responses were studied by assessment of hemolytic Ab-forming cells (PFC) or humoral serum Ab production. Adherent cells failed to produce PFC in irradiated recipients, but functioned vigorously in CY-treated recipients. Nonadherent cells generated PFC in either type of host, as did UCP. Studies of comparative responses in CY-treated recipients revealed that: (a) Ad-cells generated 2 / 3 the number of PFC given by equivalent numbers of transferred Nad cells and UCP; (b) per equivalent numbers of transferred cells the Ad fraction generated 5 times more and 16 times more Ab than did the Nad cells and UCP, respectively. Spleen cells taken from mice 6 hr after CY treatment failed to respond to the mitogens phytohemagglutinin and bacterial lipopolysaccharide, showing that all cells were temporarily incapable of proliferation. Transfer of spleen cells from donor mice 16 hr after CY treatment, into thymectomized, irradiated, bone marrow-reconstituted recipients revealed substantial T-helper cell activity. We conclude that: (a) Ad preparations lacked T cells that were supplied by CY-treated recipients although T cell proliferation was temporarily inhibited in the latter; (b) B cells present in the Ad fraction were removed from some type of inhibitor of Ab synthesis and/or secretion, the production of which may be associated with T cells present in Nad preparations and UCP; (c) T-helper cells were only transiently affected by CY

  11. 40 CFR 80.171 - Product transfer documents (PTDs).

    Science.gov (United States)

    2010-07-01

    ... (PTDs). (a) Contents. For each occasion when any gasoline refiner, importer, reseller, distributor... or CARB-based certification, or under a certification option which creates an oxygenate or PRC use restriction, then the PTD for the additized product must identify the applicable use restriction. The PTD for...

  12. The California Biomass Crop Adoption Model estimates biofuel feedstock crop production across diverse agro-ecological zones within the state, under different future climates

    Science.gov (United States)

    Kaffka, S.; Jenner, M.; Bucaram, S.; George, N.

    2012-12-01

    Both regulators and businesses need realistic estimates for the potential production of biomass feedstocks for biofuels and bioproducts. This includes the need to understand how climate change will affect mid-tem and longer-term crop performance and relative advantage. The California Biomass Crop Adoption Model is a partial mathematical programming optimization model that estimates the profit level needed for new crop adoption, and the crop(s) displaced when a biomass feedstock crop is added to the state's diverse set of cropping systems, in diverse regions of the state. Both yield and crop price, as elements of profit, can be varied. Crop adoption is tested against current farmer preferences derived from analysis of 10 years crop production data for all crops produced in California, collected by the California Department of Pesticide Regulation. Analysis of this extensive data set resulted in 45 distinctive, representative farming systems distributed across the state's diverse agro-ecological regions. Estimated yields and water use are derived from field trials combined with crop simulation, reported elsewhere. Crop simulation is carried out under different weather and climate assumptions. Besides crop adoption and displacement, crop resource use is also accounted, derived from partial budgets used for each crop's cost of production. Systematically increasing biofuel crop price identified areas of the state where different types of crops were most likely to be adopted. Oilseed crops like canola that can be used for biodiesel production had the greatest potential to be grown in the Sacramento Valley and other northern regions, while sugar beets (for ethanol) had the greatest potential in the northern San Joaquin Valley region, and sweet sorghum in the southern San Joaquin Valley. Up to approximately 10% of existing annual cropland in California was available for new crop adoption. New crops are adopted if the entire cropping system becomes more profitable. In

  13. Changes in 137Cs transfer to agricultural products

    International Nuclear Information System (INIS)

    Goncharov, N.; Timochtchenko, A.; Milutin, A.

    1999-01-01

    The food production and food harvesting systems common in the areas contaminated by the Chernobyl accident in Republic of Belarus can be grouped into three major categories: collective farm produce, private farming produce and natural foods collected from natural ecosystems. The collective farm system provided the smallest contribution (8-12 %) to the intake of 137 Cs. Natural food was the major contributor to the intake at one study site (73 %), and private produce was the major contributor (60 %) at the other study site. Assessment of the situation just after the accident (one year) shows that collective farming was still a minor contributor to 137 CS intake (10 %) whilst private fanning would have been the major contributor wherever private milk production and consumption continued. The extent to which inhabitants consume natural foods from forests has a considerable effect on their 137 CS intake. The comparative importance of food products from natural ecosystems increases with time due to the long effective ecological half lives of 137 Cs in unimproved pastures and forests. Estimation of the contribution to the fluxes of 137 Cs from the different production and harvesting systems showed that the contribution from private farming and food harvesting from natural ecosystems may also be significant, contributing 14-30 % to the total fluxes of 137 Cs from an area even if the quantity of food produced in these systems is small. However, the major contributor to the flux exported from an area was the collective farming system, accounting for about 70-86 % of the total. Refs. 12 (author)

  14. Orthography-Induced Transfer in the Production of English-Speaking Learners of Spanish

    Science.gov (United States)

    Rafat, Yasaman

    2016-01-01

    This article reports on a study on the effect of orthography on L1-based phonological transfer in L2 production in 40 novice English-speaking learners of Spanish. In particular, the role of auditory-orthographic training and production and the influence of grapheme-to-phoneme correspondences are examined. Data elicited via a picture-naming task…

  15. TRANSFER

    African Journals Online (AJOL)

    This paper reports on further studies on long range energy transfer between curcumine as donor and another thiazine dye, thionine, which is closely related to methylene blue as energy harvester (Figure 1). Since thionine is known to have a higher quantum yield of singlet oxygen sensitization than methylene blue [8], it is ...

  16. Determining productivity of transferred benthic biofilms within wetlands differing in anthropogenic stressors

    International Nuclear Information System (INIS)

    Frederick, K.; Foote, L.; Ciborowski, J.

    2010-01-01

    Algal biofilms are a fundamental contributor to wetland productivity. The films maintain high turnover rates, nutrient uptake and storage capacities are prevalent in shallow water as well as over large littoral zones. This study investigated biofilm transfer techniques as a means of accelerating carbon capture, plant production, and colonization in reclaimed oil sand wetlands affected by process water. The study examined the productivity of transferred biofilms and their ability to accelerate succession; methods of transferring biofilms; and the community composition of algae in relation to other substrates. Microcosms with 4 types of substrates were submersed in experimental trenches containing either process water or natural water. Dissolved oxygen, chlorophyll, and biomass standing crop sampling was conducted at intervals throughout a 1-year period. Analysis of variance (ANOVA) was conducted to compare the substrate types. Results of the study will be used to assess the impacts of oil sands process affected materials (OSPM) on benthic biofilm productivity and the initial carbon accumulation process.

  17. Determining productivity of transferred benthic biofilms within wetlands differing in anthropogenic stressors

    Energy Technology Data Exchange (ETDEWEB)

    Frederick, K.; Foote, L. [Alberta Univ., Edmonton, AB (Canada); Ciborowski, J. [Windsor Univ., ON (Canada)

    2010-07-01

    Algal biofilms are a fundamental contributor to wetland productivity. The films maintain high turnover rates, nutrient uptake and storage capacities are prevalent in shallow water as well as over large littoral zones. This study investigated biofilm transfer techniques as a means of accelerating carbon capture, plant production, and colonization in reclaimed oil sand wetlands affected by process water. The study examined the productivity of transferred biofilms and their ability to accelerate succession; methods of transferring biofilms; and the community composition of algae in relation to other substrates. Microcosms with 4 types of substrates were submersed in experimental trenches containing either process water or natural water. Dissolved oxygen, chlorophyll, and biomass standing crop sampling was conducted at intervals throughout a 1-year period. Analysis of variance (ANOVA) was conducted to compare the substrate types. Results of the study will be used to assess the impacts of oil sands process affected materials (OSPM) on benthic biofilm productivity and the initial carbon accumulation process.

  18. Transfer of radioactive contamination from milk to commercial dairy products

    International Nuclear Information System (INIS)

    Wilson, L.G.; Sutton, P.M.

    1988-01-01

    The fate of radioactive contamination resulting from fallout from the Chernobyl accident was studied during milk processing. A range of commercial dairy products was produced on a pilot-laboratory scale and the radiocaesium contents were measured by high-resolution gamma spectrometry. The results show that the radiocaesium partitioned with the water phase and therefore butter, cream and cheese had relatively low levels of radioactivity. Ion exchange demineralization was effective in removing radiocaesium from whey. Ultrafiltration of whey resulted in a reduction of radioactivity relative to retentate solids. (author)

  19. Quantifying the transfer of radionuclides to food products from domestic farm animals

    International Nuclear Information System (INIS)

    Howard, B.J.; Beresford, N.A.; Barnett, C.L.; Fesenko, S.

    2009-01-01

    Databases have been compiled to derive parameter values relevant to the transfer of radionuclides from feedstuffs to domestic animal products to provide a revision to the IAEA Handbook on transfer parameters TRS 364. Significant new data inputs have been incorporated into the databases from an extensive review of Russian language information and inclusion of data published since the early 1990s. Fractional gastrointestinal absorption in adult ruminants presented in the revised handbook are generally similar to those recommended for adult humans by the ICRP. Transfer coefficient values are presented in the handbook for a range of radionuclides to farm animal products. For most animal products, transfer coefficient values for elements additional to those in TRS 364 are provided although many data gaps remain. Transfer coefficients generally vary between species with larger species having lower values than smaller species. It has been suggested that the difference is partly due to the inclusion of dietary dry matter intake in the estimation of transfer coefficient and that whilst dietary intake increases with size nutrient concentrations do not. An alternative approach to quantifying transfer by using concentration ratios (CR), which do not consider dietary intake, has been evaluated. CR values compiled for the handbook vary considerably less between species than transfer coefficient values. The advantage of the CR approach is that values derived for one species could be applied to species for which there are no data. However, transfer coefficients will continue to be used as few studies currently report CR values or give data from which they can be estimated.

  20. Transfer coefficients to terrestrial food products in equilibrium assessment models for nuclear installations

    International Nuclear Information System (INIS)

    Zach, R.

    1980-09-01

    Transfer coefficients have become virtually indispensible in the study of the fate of radioisotopes released from nuclear installations. These coefficients are used in equilibrium assessment models where they specify the degree of transfer in food chains of individual radioisotopes from soil to plant products and from feed or forage and drinking water to animal products and ultimately to man. Information on transfer coefficients for terrestrial food chain models is very piecemeal and occurs in a wide variety of journals and reports. To enable us to choose or determine suitable values for assessments, we have addressed the following aspects of transfer coefficients on a very broad scale: (1) definitions, (2) equilibrium assumption, which stipulates that transfer coefficients be restricted to equilibrium or steady rate conditions, (3) assumption of linearity, that is the idea that radioisotope concentrations in food products increase linearly with contamination levels in the soil or animal feed, (4) methods of determination, (5) variability, (6) generic versus site-specific values, (7) statistical aspects, (8) use, (9) sources of currently used values, (10) criteria for revising values, (11) establishment and maintenance of files on transfer coefficients, and (12) future developments. (auth)

  1. Transfer of 137Cs to agricultural products in southern Sweden after a nuclear accident

    International Nuclear Information System (INIS)

    Haak, E.; Eriksson, Aake; Loensjoe, H.; Rosen, K.

    1998-12-01

    This report contains calculations of expected 137 Cs transfer from contaminated agricultural land to crop and animal products in the southern part of Sweden; Skaane and Blekinge. The fallout has been simulated to be 1 MBq per m 2 , uniformly deposited on the ground surface in the spring of 1995. The report covers a period of 20 years or the years 1996-2015. The calculations of 137 Cs transfer to crop products are based on official crop statistics of the year 1996 and earlier observed soil/plant transfer ratios. These ratios vary with crop and soil type. The sensitivity for 137 Cs-transfer from soil to plant varies between the counties. This variability depends on smaller root uptake in loamy than in sandy soils and less in sandy than in organic soils, and to a different distribution of these three soil types. The 137 Cs-transfer to crop products decreases considerably during a 20 years period. This depends on nuclide decay and on decreased root availability. As shown in tables and figures, the decrease is larger during the first years after fallout than later. This depends on successive ploughing of grass land during the crop rotation, which drastically decreases the root availability. Agricultural land is used for cultivating sale and fodder crops. The fodder crops are the main bases for transfer to animal products. The passage through the animal body will cause the main part of the 137 Cs intake to be linked off before the transfer to the animal products. The 137 Cs-content in a certain product will finally determine if it can be used for human intake. The 137 Cs-transfer to cow feed in MBq per 100 hectare decreases with time and, in analogy with the mean transfer to all crop products, more in the first years than in later years due to successive ploughing of grassland in the existing crop rotations. The calculations for the counties, which were made against the background of earlier Swedish micro plot and field experiments, clearly show that it will be effective

  2. An Exploratory Investigation on Modularity Adoption in Design and Production Through a Case-Based Research in a Brazilian Automaker

    DEFF Research Database (Denmark)

    Cauchick Miguel, Paulo Augusto; Hsuan, Juliana

    2010-01-01

    to what extent the adoption of modularity varies according to such tradeoffs. Case-based research is employed as the methodological approach. The unit of analysis is a business unit of an international leading manufacturer of trucks and buses, being the latter within the scope of the present investigation....... Potential gaps in the literature are also proposed for further research....

  3. Local Entropy Production in Turbulent Shear Flows: A Tool for Evaluating Heat Transfer Performance

    Institute of Scientific and Technical Information of China (English)

    H. HERWIG; F. KOCK

    2006-01-01

    Performance evaluation of heat transfer devices can be based on the overall entropy production in these devices.In our study we therefore provide equations for the systematic and detailed determination of local entropy production due to dissipation of mechanical energy and due to heat conduction, both in turbulent flows. After turbulence modeling has been incorporated for the fluctuating parts the overall entropy production can be determined by integration with respect to the whole flow domain. Since, however, entropy production rates show very steep gradients close to the wall, numerical solutions are far more effective with wall functions for the entropy production terms. These wall functions are mandatory when high Reynolds number turbulence models are used. For turbulent flow in a pipe with an inserted twisted tape as heat transfer promoter it is shown that based on the overall entropy production rate a clear statement from a thermodynamic point of view is possible. For a certain range of twist strength there is a decrease in overall entropy production compared to the case without insert. Also, the optimum twist strength can be determined. This information is unavailable when only pressure drop and heat transfer data are given.

  4. Adoption Study Of Seed Priming Technology In Upland Rice ...

    African Journals Online (AJOL)

    Adoption study was carried out during 2003 cropping season on randomly selected 83 farmers out of the 300 that participated in the upland rice seed priming technology transfer between year 2000 – 2002 to determine the impact of the technology on upland rice production in five States of Nigeria, through the use of ...

  5. Lost productivity in four European countries among patients with rheumatic disorders: are absenteeism and presenteeism transferable?

    Science.gov (United States)

    Knies, Saskia; Candel, Math J J M; Boonen, Annelies; Evers, Silvia M A A; Ament, Andre J H A; Severens, Johan L

    2012-09-01

    When national pharmacoeconomic guidelines are compared, different recommendations are identified on how to identify, measure and value lost productivity, leading to difficulties when comparing lost productivity estimates across countries. From a transferability point of view, the question arises of whether differences between countries regarding lost productivity are the result of using different calculation methods (methodological differences) or of other between-country differences. When lost productivity data differ significantly across countries, the transferability of lost productivity data across countries is hindered. The objective of this study was to investigate whether country of residence has a significant influence on the quantity of lost productivity among patients with rheumatic disorders. Confounding factors that might differ between countries were corrected for, while the methodology used to identify and measure lost productivity was kept the same. This question was investigated by means of an online questionnaire filled out by 200 respondents with a rheumatic disorder per country in four European countries, namely the Netherlands, the UK, Germany and France. In addition to those regarding lost productivity, the questionnaire contained questions about patient characteristics, disability insurance, disease characteristics, quality of life and job characteristics as these variables are expected to influence lost productivity in terms of absenteeism and presenteeism. The data were analysed by regression analyses, in which different components - being absent in last 3 months, number of days absent and presenteeism - of lost productivity were the main outcome measures and other variables, such as gender, impact of disease, shift work, job control, partial disability and overall general health, were corrected for. The results showed that country sometimes has a significant influence on lost productivity and that other variables such as, for example, age

  6. Production of molten UO2 pools by internal heating: apparatus and preliminary experimental heat transfer results

    International Nuclear Information System (INIS)

    Chasanov, M.G.; Gunther, W.H.; Baker, L. Jr.

    1977-01-01

    The capability for removal of heat from a pool of molten fuel under postaccident conditions is an important consideration in liquid-metal fast breeder reactor safety analysis. No experimental data for pool heat transfer from molten UO 2 under conditions simulating internal heat generation by fission product decay have been reported previously in the literature. An apparatus to provide such data was developed and used to investigate heat transfer from pools containing up to 7.5 kg of UO 2 ; the internal heat generation rates and pool depths attained cover most of the ranges of interest for postaccident heat removal analysis. It was also observed in these studies that the presence of simulated fission products corresponding to approximately 150,000 kW-day/kg burnup had no significant effect on the observed heat transfer

  7. PENENTUAN PRODUCTION LOT SIZES DAN TRANSFER BATCH SIZES DENGAN PENDEKATAN MULTISTAGE

    Directory of Open Access Journals (Sweden)

    Purnawan Adi W

    2012-02-01

    Full Text Available Pengendalian dan perawatan inventori merupakan suatu permasalahan yang sering dihadapi seluruh organisasi dalam berbagai sektor ekonomi. Salah satu tantangan yang yang harus dihadapi dalam pengendalian inventori adalah bagaimana menentukan ukuran lot yang optimal pada suatu sistem produksi dengan berbagai tipe. Analisis batch produksi (production lot dengan pendekatan hybrid simulasi analitik merupakan salah satu penelitian mengenai ukuran lot optimal. Penelitian tersebut menggunakan pendekatan sistem singlestage dimana tidak adanya hubungan antar proses di setiap stage atau dengan kata lain, proses yang satu independen terhadap proses yang lain. Dengan menggunakan objek penelitian yang sama dengan objek penelitian diatas, penelitian ini kemudian mengangkat permasalahan penentuan ukuran production lot dengan pendekatan multistage. Pertama, dengan menggunakan data-data yang sama dengan penelitian sebelumnya ditentukan ukuran production lot yang optimal dengan metode programa linier. Selanjutnya ukuran production lot digunakan sebegai input simulasi untuk menentukan ukuran transfer batch. Rata-rata panjang antrian dan waktu tunggu menjadi ukuran performansi yang digunakan sebagai acuan penentuan ukuran transfer batch dari beberapa alternatif ukuran yang ada. Pada penelitian ini, ukuran production lot yang dihasilkan sama besarnya dengan demand tiap periode. Sedangkan untuk ukuran transfer batch, hasil penentuan dengan menggunakan simulasi kemudian dimplementasikan ke dalam model. Hasilnya adalah adanya penurunan inventori yang terjadi sebesar 76,35% untuk produk connector dan 50,59% untuk produk box connector dari inventori yang dihasilkan dengan pendekatan singlestage. Kata kunci : multistage, production lot, transfer batch     Abstract   Inventory maintenance and inventory control is a problem that often faced by all organization in many economic sectors. One of challenges that must be faced in inventory control is how to determine the

  8. Smartphone adoption

    DEFF Research Database (Denmark)

    Petrovcikova, Katarina; Sudzina, Frantisek

    2017-01-01

    Smartphones are used by majority of Western population, and they are mobile phones of choice also in the rest of the world. The Theory of Consumption Values (TCV) is a marketing theory that explains purchase behavior of consumer goods and services. The framework consists of functional, social......, epistemic, hedonic, and conditional values; the latter being functional and/or social values present only in a specific situation. TCV is used in mobile device adoption literature disproportionably more often than in other fields. But virtually all TCV studies focused on smartphones are qualitative. The aim...

  9. Perception of Extension Specialists about the Role of Extension in the Production and Adoption of the Genetically Modified Crops in Iran

    OpenAIRE

    Seyed J.F. Hosseini

    2008-01-01

    Extension specialists were surveyed in order to explore their perception about the role of extension in the production and adoption of Genetically Modified (GM) crops in Iran. The methodology used in this study involved a combination of descriptive and quantitative research. The total population for this study was 120 extension specialists in Iran. Extension specialists believed that the first priority of extension should be to increase the participation of stakeholders in the development of ...

  10. Development and capital investment tasks involved in the production of charge transfer equipment

    International Nuclear Information System (INIS)

    Simon, Sandor

    1983-01-01

    Stringent requirements had to be considered in the course of the production development of charge transfer equipment. The production of structures demanding extremely high endurance was based on extensive co-operation. Special alloys were needed for parts and bearings, special heat-treatment was required at certain sections for large dimensions etc. Appropriate mashine stock, assembly and test hall have been built for assembling and testing the equipment with both 440 and 100 MW.(Sz.J.)

  11. Technology transfer for industrial production of superconducting magnets for the RHIC project at BNL

    International Nuclear Information System (INIS)

    Wanderer, P.; Anerella, M.D.; Greene, A.F.; Kelly, E.; Willen, E.

    1994-01-01

    Industrial production of superconducting magnets for the Relativistic Heavy Ion Collider (RHIC) has begun. The R ampersand D for the magnets was carried out at BNL. Following the award of built-to-print contracts, staff from the laboratory and the vendors worked toward transferring both design principles and practical details to an industrial framework for cost effective production. All magnets made thus far have been acceptable for use in RHIC

  12. Possibilities of production of neutron-rich Md isotopes in multi-nucleon transfer reactions

    Energy Technology Data Exchange (ETDEWEB)

    Mun, Myeong-Hwan; Lee, Young-Ouk [Korea Atomic Energy Research Institue, Daejeon (Korea, Republic of); Adamian, G.G.; Antonenko, N.V. [Joint Institute for Nuclear Research, Dubna (Russian Federation)

    2016-12-15

    The possibilities of production of yet unknown neutron-rich isotopes of Md are explored in several multi-nucleon transfer reactions with actinide targets and stable and radioactive beams. The projectile-target combinations and bombarding energies are suggested to produce new neutron-rich isotopes of Md in future experiments. (orig.)

  13. Enantioselective H-atom transfer reaction: a strategy to synthesize formaldehyde aldol products.

    Science.gov (United States)

    Sibi, Mukund P; Patil, Kalyani

    2005-04-14

    [reaction: see text] Enantioselective radical alkylation of Baylis-Hillman adducts furnished aldol products in good yield and selectivity. The results illustrate that the selectivity in the hydrogen atom transfer is dependent on the size of the ester substituent, with smaller substituents providing better enantioselectivity.

  14. Projected impacts to the production of outdoor recreation opportunities across US state park systems due to the adoption of a domestic climate change mitigation policy

    International Nuclear Information System (INIS)

    Smith, Jordan W.; Leung, Yu-Fai; Seekamp, Erin; Walden-Schreiner, Chelsey; Miller, Anna B.

    2015-01-01

    Highlights: • A technical efficiency model identifies where state park systems can be improved. • The technical efficiency model is joined with output of CC policy simulations. • Shifts in operating expenditure under the CC mitigation policy are estimated. • Results reveal substantial variability across states. • Increasing technical efficiency is the best solution to adapt to CC policy impacts. - Abstract: Numerous empirical and simulation-based studies have documented or estimated variable impacts to the economic growth of nation states due to the adoption of domestic climate change mitigation policies. However, few studies have been able to empirically link projected changes in economic growth to the provision of public goods and services. In this research, we couple projected changes in economic growth to US states brought about by the adoption of a domestic climate change mitigation policy with a longitudinal panel dataset detailing the production of outdoor recreation opportunities on lands managed in the public interest. Joining empirical data and simulation-based estimates allow us to better understand how the adoption of a domestic climate change mitigation policy would affect the provision of public goods in the future. We first employ a technical efficiency model and metrics to provide decision makers with evidence of specific areas where operational efficiencies within the nation's state park systems can be improved. We then augment the empirical analysis with simulation-based changes in gross state product (GSP) to estimate changes to the states’ ability to provide outdoor recreation opportunities from 2014 to 2020; the results reveal substantial variability across states. Finally, we explore two potential solutions (increasing GSP or increasing technical efficiency) for addressing the negative impacts on the states’ park systems operating budgets brought about by the adoption of a domestic climate change mitigation policy; the

  15. Simulations of corrosion product transfer with the OSCAR V1.2 code

    International Nuclear Information System (INIS)

    Dacquait, F.; Francescatto, J.; Broutin, F.; Genin, J.B.; Benier, G.; Girard, M.; You, D.; Ranchoux, G.; Bonnefon, J.; Bachet, M.; Riot, G.

    2012-09-01

    Activated Corrosion Products (ACPs) generate a radiation field in PWRs, which is the major contributor to the dose absorbed by nuclear power plant staff working during shutdown operations and maintenance. Therefore, a thorough understanding of the mechanisms that control the corrosion product transfer is of the highest importance. Since the 1970's, the R and D strategy in France has been based on experiments in test loops representative of PWR conditions, on in-situ gamma spectrometry measurements of the PWR primary system contamination and on simulation code development. The simulation of corrosion product transfers in PWR primary circuits is a major challenge since it involves many physical and chemical phenomena including: corrosion, dissolution, precipitation, erosion, deposition, convection, activation... In addition to the intrinsic difficulty of multi-physics modelling, the primary systems present severe operating conditions (300 deg. C, 150 bar, neutron flux, fluid velocity up to 15 m.s -1 and very low corrosion product concentrations). The purpose of the OSCAR code, developed by the CEA in cooperation with EDF and AREVA NP, is to predict the PWR primary system contamination by corrosion and fission products. The OSCAR code is considered to be not only a tool for numerical simulations and predictions (operational practices improvements and new-built PWRs design) but also one that might combine and organise all new knowledge useful to progress on contamination. The OSCAR code for Products of Corrosion, OSCAR PC, allows researchers to analyse the corrosion product behaviour and to calculate the ACP volume and surface activities of the primary and auxiliary systems. In the new version, OSCAR PC V1.2, the corrosion product transfer in the particulate form is enhanced and a new feature is the possibility to simulate cold shutdowns. In order to validate this version, the contamination transfer has been simulated in 5 French PWRs with different operating and

  16. Customer familiarity with new industrial product technology and its influence on adoption: The case of De Beers diamond extraction equipment

    Directory of Open Access Journals (Sweden)

    Nabbie, A.

    2013-05-01

    Full Text Available An investigation was conducted into the influence of industry customers familiarity with new technology on their decisions when purchasing discontinuous industrial products. This was done in the context where the supplier and customer organisations are entities in the same company. Even in this favourable context, continuous products remained successful despite a better solution being available. Literature on this close type of relationship is sparse, mostly because information on such internal processes is generally regarded as competitive. The case investigated was the DebTech division of De Beers, and their experience with products that they design and manufacture for the global diamond mining industry. Product developer and customer data from applicable projects was analysed, and interviews and observations were conducted. The results indicate that familiarity with the product technology favourably influences perceptions of newness, safety, and the ease of integration of a product. Familiarity increases customers propensity to recommend and purchase new-technology products.

  17. All in: expansion of the acquisition of data for outcomes and procedure transfer (ADOPT) program to an entire SAGES annual meeting hands-on hernia course.

    Science.gov (United States)

    Dort, Jonathan; Trickey, Amber; Paige, John; Schwarz, Erin; Cecil, Tom; Coleman, Mark; Dunkin, Brian

    2018-05-01

    Continuing professional development (CPD) for the surgeon has been challenging because of a lack of standardized approaches of hands-on courses, resulting in poor post-course outcomes. To remedy this situation, SAGES has introduced the ADOPT program, implementing a standardized, long-term mentoring program as part of its hernia hands-on course. Previous work evaluating the pilot program showed increased adoption of learned procedures as well as increased confidence of the mentored surgeons. This manuscript describes the impact of such a program when it is instituted across an entire hands-on course. Following collection of pre-course benchmark data, all participants in the 2016 SAGES hands-on hernia course underwent structured, learner-focused instruction during the cadaveric lab. All faculty had completed a standardized teaching course in the Lapco TT format. Subsequently, course participants were enrolled in a year-long program involving longitudinal mentorship, webinars, conference calls, and coaching. Information about participant demographics, training, experience, self-reported case volumes, and confidence levels related to procedures were collected via survey 3 months prior to 9 months after the course. Twenty surgeons participated in the SAGES ADOPT 2016 hands-on hernia program. Of these, seventeen completed pre-course questionnaires (85%), ten completed the 3-month questionnaire (50%), and four completed the 9-month questionnaire (20%). Nine of ten respondents of the 3-month survey (90%) reported changes in their practice. In the 9-month survey, significant increases in the annualized procedural volumes were reported for open primary ventral hernia repair, open components separation, and mesh insertion for ventral hernia repair (p ADOPT program to an entire hands-on hernia course is both feasible and beneficial, with evidence of Kirkpatrick Levels 1-4a training effectiveness. This expanded success suggests that it is a useful blueprint for the CPD of

  18. Maximizing the transferred power to electric arc furnace for having maximum production

    International Nuclear Information System (INIS)

    Samet, Haidar; Ghanbari, Teymoor; Ghaisari, Jafar

    2014-01-01

    In order to increase production of an EAF (electric arc furnace) by reduction of melting time, one can increase transferred power to the EAF. In other words a certain value of energy can be transferred to the EAF in less time. The transferred power to the EAF reduces when series reactors are utilized in order to have stable arc with desired characteristics. To compensate the reduced transferred power, the secondary voltage of the EAF transformer should be increased by tap changing of the transformer. On the other hand, after any tap changing of the EAF transformer, improved arc stability is degraded. Therefore, the series reactor and EAF transformer tap changing should be simultaneously determined to achieve arc with desired characteristics. In this research, three approaches are proposed to calculate the EAF system parameters, by which the optimal set-points of the different series reactor and EAF transformer taps are determined. The electric characteristics relevant to the EAF for the all transformer and series reactor taps with and without SVC (static VAr compensator) are plotted and based on these graphs the optimal set-points are tabulated. Finally, an economic evaluation is also presented for the methods. - Highlights: • The main goal is to transfer the maximum power to electric arc furnace. • Optimal transformer and series reactor taps are determined. • Arc stability and transferred power to EAF determine the optimal performance. • An economic assessment is done and the number of increased meltings is calculated

  19. Immunity to Babesia in mice I. Adoptive transfer of immunity to Babesia rodhaini with immune spleen cells and the effect of irradiation on the protection of immune mice

    NARCIS (Netherlands)

    Kuil, H.; Zivkovic, D.; Seinen, W.; Albers-van Bemmel, C.M.G.; Speksnijder, J.E.

    1984-01-01

    Immunisation of Balb/c mice against Babesia rodhaini by an amicarbalide- controlled infection resulted in a solid immunity which lasted for 216 days. With spleen cells of immune mice protection could be transferred both to naive mice pretreated with cyclophosphamide. Treatment of naive mice with

  20. Applying Toyota Production System principles to a psychiatric hospital: making transfers safer and more timely.

    Science.gov (United States)

    Young, John Q; Wachter, Robert M

    2009-09-01

    Health care organizations have increasingly embraced industrial methods, such as the Toyota Production System (TPS), to improve quality, safety, timeliness, and efficiency. However, the use of such methods in psychiatric hospitals has been limited. A psychiatric hospital applied TPS principles to patient transfers to the outpatient medication management clinics (MMCs) from all other inpatient and outpatient services within the hospital's system. Sources of error and delay were identified, and a new process was designed to improve timely access (measured by elapsed time from request for transfer to scheduling of an appointment and to the actual visit) and patient safety by decreasing communication errors (measured by number of failed transfers). Complexity was substantially reduced, with one streamlined pathway replacing five distinct and more complicated pathways. To assess sustainability, the postintervention period was divided into Period 1 (first 12 months) and Period 2 (next 24 months). Time required to process the transfer and schedule the first appointment was reduced by 74.1% in Period 1 (p < .001) and by an additional 52.7% in Period 2 (p < .0001) for an overall reduction of 87% (p < .0001). Similarly, time to the actual appointment was reduced 31.2% in Period 1 (p < .0001), but was stable in Period 2 (p = .48). The number of transfers per month successfully processed and scheduled increased 95% in the postintervention period compared with the pre-implementation period (p = .015). Finally, data for failed transfers were only available for the postintervention period, and the rate decreased 89% in Period 2 compared with Period 1 (p = .017). The application of TPS principles enhanced access and safety through marked and sustained improvements in the transfer process's timeliness and reliability. Almost all transfer processes have now been standardized.

  1. Assessing the transfer of risk due to transportation of agricultural products.

    Science.gov (United States)

    Li, Pei-Chiun; Shih, Hsiu-Ching; Ma, Hwong-Wen

    2015-02-01

    Health risk assessment (HRA) is the process used to estimate adverse health effects on humans. The importance and sensitivity of food chains to HRA have been observed, but the impact of the transportation of food has generally been ignored. This study developed an exposure assessment to demonstrate the significance of the transportation of agricultural products in HRA. The associated case study estimated the health risks derived from various sources of arsenic emissions in Taiwan. Two assessment scenarios, self-sufficiency and transportation of agricultural products, were compared to calculate risk transfer ratios that show the impact of agriculture transportation. The risk transfer ratios found by the study range from 0.22 to 42.10, indicating that the quantity of transportation of agricultural products is the critical factor. High air deposition and high agricultural production are the two main contributors to the effect of the transportation of agricultural products on HRA. Risk reduction measures could be applied to high-pollution areas as well as to areas with high agricultural productivity to reduce ingestion risks to residents. Certain areas that are sensitive to the transportation of agricultural products may incur more risks if emissions increase in agriculturally productive counties. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Modelling the behaviour of corrosion products in the primary heat transfer circuits of pressurised water reactors

    International Nuclear Information System (INIS)

    Rodliffe, R.S.; Polley, M.V.; Thornton, E.W.

    1985-05-01

    The redistribution of corrosion products from the primary circuit surfaces of a water reactor can result in increased flow resistance, poorer heat transfer performance, fuel failure and radioactive contamination of circuit surfaces. The environment is generally sufficiently well controlled to ensure that the first three effects are not limiting. The last effect is of particular importance since radioactive corrosion products are major contributors to shutdown fields and since it is necessary to ensure that the radiation exposure of personnel is as low as reasonably achievable. This review focusses attention on the principles which must form the basis for any mechanistic model describing the formation, transport and deposition of radioactive corrosion products. It is relevant to all water reactors in which the primary heat transfer medium is predominantly single-phase water and in which steam is generated in a secondary circuit, i.e. including CANDU pressurised heavy water reactors, Sovient VVERs, etc. (author)

  3. SRF Accelerator Technology Transfer Experience from the Achievement of the SNS Cryomodule Production Run

    CERN Document Server

    Hogan, John; Daly, Edward; Drury, Michael A; Fischer, John; Hiatt, Tommy; Kneisel, Peter; Mammosser, John; Preble, Joseph P; Whitlatch, Timothy; Wilson, Katherine; Wiseman, Mark

    2005-01-01

    This paper will discuss the technology transfer aspect of superconducting RF expertise, as it pertains to cryomodule production, beginning with the original design requirements through testing and concluding with product delivery to the end user. The success of future industrialization, of accelerator systems, is dependent upon a focused effort on accelerator technology transfer. Over the past twenty years the Thomas Jefferson National Accelerator Facility (Jefferson Lab) has worked with industry to successfully design, manufacture, test and commission more superconducting RF cryomodules than any other entity in the United States. The most recent accomplishment of Jefferson Lab has been the successful production of twenty-four cryomodules designed for the Spallation Neutron Source (SNS). Jefferson Lab was chosen, by the United States Department of Energy, to provide the superconducting portion of the SNS linac due to its reputation as a primary resource for SRF expertise. The successful partnering with, and d...

  4. Modeling of the substrate and product transfer coefficients for ethanol fermentation

    International Nuclear Information System (INIS)

    Zerajic, S.; Grbavcic, Z.; Savkovic-Stevanovic, J.

    2008-01-01

    The transfer phenomena of the substrate and product for ethanol fermentation with immobilized biocatalyst were investigated. Fermentation was carried out with a biocatalyst consisting of Ca-alginate gel in the form of two-layer spherical beads in anaerobic conditions. The determination of kinetic parameters was achieved by fitting bioreaction progress curves to the experimental data. The calculation of the diffusion coefficients was performed by numerical methods for experimental conditions. Finally, the glucose and ethanol transfer coefficients are defined and determined, using the effective diffusion coefficients. (Abstract Copyright [2008], Wiley Periodicals, Inc.)

  5. Transfer parameters of fission and activation products present in effluents of nuclear power reactors

    International Nuclear Information System (INIS)

    Cancio, D.; Menossi, C.A.; Ciallella, N.R.

    1978-01-01

    The paper presents results of research carried out in Argentina on transfer parameters of fission and activation products which may be present in the effluents of nuclear power reactors. For some nuclides, as Sr-90, Co-137 and I-131, the parameters were obtained by studies of the fallout, from measurements of integrated levels in the environment and in the food chains. Other values are concentration factors derived from laboratory and field experiments. They refer to fish, molluscs, crustaces and fresh water plants, for several fission and activation nuclides. Transfer parameters obtained have been of significant importance for environmental assessments, relating to nuclear installations in Argentina. (author)

  6. Household production and consumption over the life cycle: National Time Transfer Accounts in 14 European countries

    Directory of Open Access Journals (Sweden)

    Lili Vargha

    2017-03-01

    Full Text Available Background: While the importance of unpaid household labour is recognised in total economic output, little is known about the demographics of household production and consumption. Objective: Our goal is to give a comprehensive estimation on the value of household production and its consumption by age and gender and analyse nonmarket economic transfers in 14 European countries based on publicly available harmonised data. Methods: We introduce a novel imputation method of harmonised European time use (HETUS data to the European Union Statistics on Income and Living Conditions (EU-SILC in order to assign time spent on home production to consumers in households and estimate time transfers. Moreover, monetary values are attributed to household production activities using data on earnings from the Structure of Earnings Survey (SES. Results: We show that the nonmarket economic life cycle of men differs from that of women. The gender gap in household production is not evenly distributed over the life cycle. Women of working age contribute the most in net terms, while the main beneficiaries of household goods and services are children and to a lesser extent adult men. These patterns are similar across countries, with variations in the gender- and age-specific levels of home production and consumption. Conclusions: In Europe, in the national economy, intergenerational flows are important in sustaining both childhood and old age. In contrast, in the household economy, intergenerational transfers flow mostly towards children. Contribution: We add a new focus to the research on household production: While keeping the gender aspect, we demonstrate the importance of the life cycle component in household production.

  7. Studies on the rheology and oxygen mass transfer in the clavulanic acid production by Streptomyces clavuligerus

    Directory of Open Access Journals (Sweden)

    E. R. Gouveia

    2000-12-01

    Full Text Available In the present work rheological characteristics and volumetric oxygen transfer coefficient (kLa were investigated during batch cultivations of Streptomyces clavuligerus NRRL 3585 for production of clavulanic acid. The experimental rheological data could be adequately described in terms of the power law model and logistic equation. Significant changes in the rheological parameters consistency index (K and flow behavior index (n were observed with the fermentation evolution. Interesting correlations between the consistency index (K/biomass concentration (C X and the flow behavior index (n/biomass concentration were proposed. Volumetric oxygen mass transfer coefficient (kLa was determined by the gas balance method. Classical correlation relating the volumetric oxygen mass transfer coefficient to the operating conditions, physical and to transport properties, including apparent viscosity (muap, could be applied to the experimental results.

  8. Technology transfer to US oil producers: A policy tool to sustain or increase oil production

    Energy Technology Data Exchange (ETDEWEB)

    Dowd, W. T.

    1990-03-01

    The Department of Energy provided the Interstate Oil Compact Commission with a grant to identify and evaluate existing technology transfer channels to operators, to devise and test improvements or new technology transfer channels and to make recommendations as to how the Department of Energy's oil and gas technology transfer methods could be improved. The IOCC conducted this effort in a series of four tasks: a structural analysis to characterize the oil producing industry according to operator production size class, geographic location, awareness and use of reservoir management technologies, and strategies for adding reserves and replacing produced reserves; targeted interviews conducted with some 300 oil and gas industry participants to identify current technology transfer channels and their relative usefulness for various classes of industry participants; a design and testing phase, in which the IOCC critiqued the current technology transfer structure, based on results of the structural analysis and targeted interviews, and identified several strategies for improvement; and an evaluation of existing state outreach programs to determine whether they might provide a model for development of additional outreach programs in other producing states.

  9. Transferring experience labs for production engineering students to universities in newly industrialized countries

    Science.gov (United States)

    Leiden, A.; Posselt, G.; Bhakar, V.; Singh, R.; Sangwan, K. S.; Herrmann, C.

    2018-01-01

    The Indian economy is one of the fastest growing economies in the world and the demand for the skilled engineers is increasing. Subsequently the Indian education sector is growing to provide the necessary number of skilled engineers. Current Indian engineering graduates have broad theoretical background but lack in methodological, soft and practical skills. To bridge this gap, the experience lab ideas from the engineering education at “Die Lernfabrik” (learning factory) of the Technische Universität Braunschweig (TU Braunschweig) is transferred to the Birla Institute of Technology and Science in Pilani (BITS Pilani), India. This Lernfabrik successfully strengthened the methodological, soft and practical skills of the TU Braunschweig production-engineering graduates. The target group is discrete manufacturing education with focusing on energy and resource efficiency as well as cyber physical production systems. As the requirements of industry and academia in India differs from Germany, the transfer of the experience lab to the Indian education system needs special attention to realize a successful transfer project. This publication provides a unique approach to systematically transfer the educational concept in Learning Factory from a specific university environment to a different environment in a newly industrialized country. The help of a bilateral university driven practice partnership between the two universities creates a lighthouse for the Indian university environment.

  10. Performance of the dot product function in radiative transfer code SORD

    Science.gov (United States)

    Korkin, Sergey; Lyapustin, Alexei; Sinyuk, Aliaksandr; Holben, Brent

    2016-10-01

    The successive orders of scattering radiative transfer (RT) codes frequently call the scalar (dot) product function. In this paper, we study performance of some implementations of the dot product in the RT code SORD using 50 scenarios for light scattering in the atmosphere-surface system. In the dot product function, we use the unrolled loops technique with different unrolling factor. We also considered the intrinsic Fortran functions. We show results for two machines: ifort compiler under Windows, and pgf90 under Linux. Intrinsic DOT_PRODUCT function showed best performance for the ifort. For the pgf90, the dot product implemented with unrolling factor 4 was the fastest. The RT code SORD together with the interface that runs all the mentioned tests are publicly available from ftp://maiac.gsfc.nasa.gov/pub/skorkin/SORD_IP_16B (current release) or by email request from the corresponding (first) author.

  11. Literature research on the production, loading, flow, and heat transfer of slush hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Park, Young Moo [Dept. of Mechanical Engineering, Ajou University, Wonchon-dong san 5, Paldal-Gu, Suwon 442-749 (Korea, Republic of)

    2010-12-15

    This study summarizes the available information on slush hydrogen and answer pending engineering questions that arise in the design of slush hydrogen propellant systems. The four methods for the production of slush are discussed. For storage, slush hydrogen must be pressurized, free from impurities, and continuously upgraded. Slush flowing at low flow rates has a higher viscosity than the liquid, however at higher velocities it approaches the viscosity of neat liquid. For the entire range of natural convection and nucleate boiling, the heat transfer at the triple-point temperature and pressure is nearly the same for the liquid and slush. The natural convection from smooth surfaces for slush can be predicted using available correlations. However, for engineering analysis and design of a system involving a slush cryogenic propellant, reliable information is required on production, flow, heat transfer, and instrumentation of these fluids. Some relevant and important aspects of slush hydrogen which have not yet been fully answered are presented. (author)

  12. Effect of Inlet Velocity on Heat Transfer Process in a Novel Photo-Fermentation Biohydrogen Production Bioreactor using Computational Fluid Dynamics Simulation

    Directory of Open Access Journals (Sweden)

    Zhiping Zhang

    2014-11-01

    Full Text Available Temperature is one of the most important parameters in biohydrogen production by way of photo-fermentation. Enzymatic hydrolysate of corncob powder was utilized as a substrate. Computational fluid dynamics (CFD modeling was conducted to simulate the temperature distribution in an up-flow baffle photo-bioreactor (UBPB. Commercial software, GAMBIT, was utilized to mesh the photobioreactor geometry, while the software FLUENT was adopted to simulate the heat transfer in the photo-fermentation process. The inlet velocity had a marked impact on heat transfer; the most optimum velocity value was 0.0036 m•s-1 because it had the smallest temperature fluctuation and the most uniform temperature distribution. When the velocity decreased from 0.0036 m•s-1 to 0.0009 m•s-1, more heat was accumulated. The results obtained from the established model were consistent to the actual situation by comparing the simulation values and experimental values. The hydrogen production simulation verified that the novel UBPB was suitable for biohydrogen production by photosynthetic bacteria because of its uniform temperature and lighting distribution, with the serpentine flow pattern also providing mixing without additional energy input, thus enhancing the mass transfer and biohydrogen yield.

  13. Morphological appearance, content of extracellular matrix and vascular density of lung metastases predicts permissiveness to infiltration by adoptively transferred natural killer and T cells

    DEFF Research Database (Denmark)

    Yang, Q.; Goding, S.; Hagenaars, M.

    2006-01-01

    . Analyses of tumors for extracellular matrix (ECM) components and PECAM-1(+) vasculature, revealed that the I-R lesions are hypovascularized and contain very little laminin, collagen and fibronectin. In contrast, the I-P loose tumors are well-vascularized and they contain high amounts of ECM components....... Interestingly, the distribution pattern of ECM components in the I-P loose tumors is almost identical to that of the normal lung tissue, indicating that these tumors develop around the alveolar walls which provide the loose tumors with both a supporting tissue and a rich blood supply. In conclusion, tumor...... infiltration by activated NK and T cells correlates with the presence of ECM components and PECAM-1(+) vasculature in the malignant tissue. Thus, analysis of the distribution of ECM and vasculature in tumor biopsies may help select patients most likely to benefit from cellular adoptive immunotherapy....

  14. Fluctuation theorem for entropy production during effusion of an ideal gas with momentum transfer.

    Science.gov (United States)

    Wood, Kevin; Van den Broeck, C; Kawai, R; Lindenberg, Katja

    2007-06-01

    We derive an exact expression for entropy production during effusion of an ideal gas driven by momentum transfer in addition to energy and particle flux. Following the treatment in Cleuren [Phys. Rev. E 74, 021117 (2006)], we construct a master equation formulation of the process and explicitly verify the thermodynamic fluctuation theorem, thereby directly exhibiting its extended applicability to particle flows and hence to hydrodynamic systems.

  15. Radiocaesium transfer from whole milk to a range of milk products

    International Nuclear Information System (INIS)

    McEnri, Catherine; Cunningham, J.D.; Mitchell, P.I.

    1990-12-01

    Milk and milk products constitute a substantial portion of the human diet and represent one of the principal means by which food-borne radionuclides are ingested. The Chernobyl accident and subsequent widespread contamination demonstrated clearly that the dairy industry is highly sensitive to air-borne pollution. In this report, the results of a project to study the transfer of radiocaesium from whole milk to a wide range of milk products manufactured by the Irish Dairy Industry are presented together with a review of the relevant literature

  16. INTERNET USE ADOPTION AMONG ACADEMICIANS: Comparing Innovative Adopters and Other Adopter Types

    Directory of Open Access Journals (Sweden)

    Norbayah BTE MOHD SUKI

    2006-04-01

    Full Text Available Online shopping represents an innovation to be adopted or rejected by online consumersglobally. Previous experiences and knowledge of innovation are the main factors affectingpeople’s willingness to adopt a new innovation. We explore how Internet use differsbetween academicians who are innovative adopters and other types of adopters.Academicians who are innovative adopters are hypothesized to: have more years of experience on online shopping, have greater frequency of purchase, and pay a higher price for items purchased online.Data were collected from 301 respondents. Results provide new perspective on innovativeadopters among Malaysian academicians; they have less experience than other adopters inshopping for products online, make fewer purchases online and pay small amount ofmoney in shopping for products online than other adopters. Directions for future research are also discussed.

  17. Thinking About Adoption

    Science.gov (United States)

    ... asked questions. Q: I think I want to adopt. Where do I begin?​ A: Thinking about adoption ... through adoption. Learn more about their How-to-Adopt and Adoption Parenting Network . Q: What are the ...

  18. Cash transfer programme, productive activities and labour supply: Evidence from randomized experiment in Kenya

    Science.gov (United States)

    Asfaw, Solomon; Davis, Benjamin; Dewbre, Josh; Handa, Sudhanshu; Winters, Paul

    2015-01-01

    This paper reports analysis of the impact of Kenya’s Cash Transfer for Orphans and Vulnerable Children Programme on the household decisions on productive activities using data from a randomized experimental design. Results show that the programme had a positive and significant impact on food consumption coming from home production, accumulation of productive assets, especially on the ownership of small livestock and on formation of nonfarm enterprise, especially for females. The programme has provided more flexibility to families in terms of labour allocation decisions, particularly for those who are geographically isolated. The programme was also found to have reduced child labour, an important objective of the programme. However we find very little impact of the programme on direct indicators of crop production. PMID:25663712

  19. Transfer of radionuclides from the environment to crops and agricultural products

    International Nuclear Information System (INIS)

    Delmas, J.

    1977-01-01

    The transfer rates of 90 Sr, 137 Cs, 54 Mn, 65 Zn, 60 Co and 22 Na from the irrigation water to different crops, determined by means of experimental models, depend on the mode of conveyance, the water quality, and on the type and portion of the plant in question. In certain cases, the resulting contamination to foodstuffs undergoing irrigation is higher than that of the water. The contamination level of the consumed product also depends on the food processing technology. The monitoring of crops and converted agricultural products is thus of great use for the knowledge of the radiological state of the site. Measurements taken in the environment show that this contamination is very slight. This monitoring is very well accepted by farmers and managers of food product conversion companies, because it provides proof of the quality of their products from the radiological standpoint [fr

  20. Lymphocyte-conditioned medium in combination with interleukin-2 effectively induces antitumour autoimmunity by adoptive transfer of short activated killer (SHAK) cells.

    Science.gov (United States)

    Buer, J; Hilse, R; Dallmann, I; Grosse, J; Kirchner, H; Zorn, U; Hänninen, E L; Franzke, A; Duensing, S; Poliwoda, H

    1995-03-01

    In this study, effective antitumour immunity was transferred by autologous short activated killer (SHAK) cells induced over four hours with lymphocyte conditioned medium (LCM) and recombinant interleukin-2 (rIL-2). Among eight patients with progressive metastatic renal cell carcinoma refractory to standard therapy, there were six objective tumour responses to SHAKs. Progression-free survival ranged from 0 to 8+ months, and overall survival ranged from 2 to 14+ months, with a median of 9+ months. Systemic toxicity of SHAKs was limited to flulike symptoms. Patient SHAKs provided a tumour-specific immunity, both cellular and humoral (expression and secretion of secondary cytokines, including IL-2, GM-CSF, INF-gamma and TNF-alpha), far superior to rIL-2 activated killer cells.

  1. Transfer of 226Ra, 85Sr and 137Cs from milk to milk products

    International Nuclear Information System (INIS)

    Al-Masri, M.S.; Nashawati, A.; Amin, Y.; Al-Akel, B.

    2006-01-01

    Transfer of 226 Ra, 85 Sr and 137 Cs from cow and sheep milk to various Syrian dairy products has been evaluated. Dairy products include Kashkivan cheese, braided cheese, Haloom cheese, Sircassian cheese, liquid cheese, native cheese, cottage, thick yogurt, butter and milk cream. The results showed that the percentage of 226 Ra, 85 Sr and 137 Cs transferred from cow milk to milk cream (P t = food processing retention factor x processing efficiency x 100%) has reached 32%, 16% and 7%, respectively. Butter and liquid cheese were found to have the lowest percentage of transferred 226 Ra, 85 Sr and 137 Cs. Most of the obtained P t values of the studied radionuclides in thick yogurt were relatively low in spite of the high processing efficiencies of thick yogurt. Moreover, the transfer, P t , of the studied radionuclides from cow milk to the prepared cheese was higher than those values determined for sheep milk. This is due to differences in chemical compositions of each type of milk. On the other hand, the treatment of Native cheese, most commonly consumed cheese in Syria, with different concentrations of NaCl solutions showed that 137 Cs was completely removed from cheese soaking in 5% NaCl solution (soaking time of 48 hours), while 40% of 226 Ra and 80% of 85 Sr were also decontaminated using 0-2.5% NaCl solutions and soaking time of 48 hours. Based on the obtained results, industrialization processes of the dairy products that resulted the removal of radionuclides have been identified. (author)

  2. Polarized electrode enhances biological direct interspecies electron transfer for methane production in upflow anaerobic bioelectrochemical reactor.

    Science.gov (United States)

    Feng, Qing; Song, Young-Chae; Yoo, Kyuseon; Kuppanan, Nanthakumar; Subudhi, Sanjukta; Lal, Banwari

    2018-08-01

    The influence of polarized electrodes on the methane production, which depends on the sludge concentration, was investigated in upflow anaerobic bioelectrochemical (UABE) reactor. When the polarized electrode was placed in the bottom zone with a high sludge concentration, the methane production was 5.34 L/L.d, which was 53% higher than upflow anaerobic sludge blanket (UASB) reactor. However, the methane production was reduced to 4.34 L/L.d by placing the electrode in the upper zone of the UABE reactor with lower sludge concentration. In the UABE reactor, the methane production was mainly improved by the enhanced biological direct interspecies electron transfer (bDIET) pathway, and the methane production via the electrode was a minor fraction of less than 4% of total methane production. The polarized electrodes that placed in the bottom zone with a high sludge concentration enhance the bDIET for methane production in the UABE reactor and greatly improve the methane production. Copyright © 2018. Published by Elsevier Ltd.

  3. Modification / procedural changes adopted for safe and smooth operation of Heavy Water Plant, Hazira for maximising productivity and resulting in energy conservation (Paper No. 6.6)

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    The Heavy Water Plant at Hazira is based on monothermal ammonia-hydrogen exchange process. The plant is built in two stream for isotopic exchange and enrichment with common facilities for interconnections with fertilizer plant, synthesis unit, amide preparation, utilities and final product, identical to HWP, Thal unit. This plant is built after incorporating some of the improvement effected from operating experiences gained from Baroda, Tuticorin and Thal plants. Plant erection was completed without a single casualty/mishap well within the time schedule and commissioning was completed within six months from charging of synthesis gas and ammonia in the plant. A few modifications of minor/major nature have been incorporated both in the design and during the course of operation. Some procedural changes have also been adopted for flexibility of operation, improved productivity and energy conservation. (author). 2 figs

  4. The Use of Video in Knowledge Transfer of Teacher-Led Psychosocial Interventions: Feeling Competent to Adopt a Different Role in the Classroom (L'utilisation de la vidéo dans le transfert de connaissances dans les interventions psychosociales menées par les enseignants : sentir que l'on a la compétence d'adopter un rôle différent dans la salle de classe)

    Science.gov (United States)

    Beauregard, Caroline; Rousseau, Cécile; Mustafa, Sally

    2015-01-01

    Because they propose a form of modeling, videos have been recognised to be useful to transfer knowledge about practices requiring teachers to adopt a different role. This paper describes the results of a satisfaction survey with 98 teachers, school administrators and professionals regarding their appreciation of training videos showing teacher-led…

  5. Effect of algae pigmentation on photobioreactor productivity and scale-up: A light transfer perspective

    International Nuclear Information System (INIS)

    Murphy, Thomas E.; Berberoglu, Halil

    2011-01-01

    This paper reports a numerical study coupling light transfer with photosynthetic rate models to determine the size and microorganism concentration of photobioreactors based on the pigmentation of algae to achieve maximum productivity. The wild strain Chlamydomonas reinhardtii and its transformant tla1 with 63% lower pigmentation are used as exemplary algae. First, empirical models of the specific photosynthetic rates were obtained from experimental data as a function of local irradiance using inverse methods. Then, these models were coupled with the radiative transfer equation (RTE) to predict both the local and total photosynthetic rates in a planar photobioreactor (PBR). The optical thickness was identified as the proper scaling parameter. The results indicated that under full sunlight corresponding to about 400 W/m 2 photosynthetically active irradiation, enhancement of PBR productivity up to 30% was possible with tla1. Moreover, under similar irradiation, optical thicknesses above 169 and 275 for the wild strain and tla1, respectively, did not further enhance PBR productivity. Based on these results guidelines are provided for maximizing PBR productivity from a light transport perspective.

  6. Examining the Effect of World Price Transfer to Domestic Markets for Sensitive and Certain Agricultural Products in Iran

    Directory of Open Access Journals (Sweden)

    M. shabanzadeh

    2016-03-01

    correction model. In fact, error correction model links the short term fluctuations of the variables to their long term equilibrium values and shows adjustment speed and long term movement towards equilibrium. Results and Discussion: The results of the present study show transfer of the world price fluctuations to the domestic market in the long run is more than in the short run. Moreover, if the products face a gap in domestic demand, and the local production is so limited that it cannot limit the import of that product, the products would be more affected by fluctuations in world prices. The results of ECM model reveal that the speed of adjustment towards long run equilibrium for most products is low such that if the shock enters the market of each product a long time is required for correcting the short-run and long-run imbalance equilibrium and bring it back to the first equilibrium. Conclusion: The results showed that most of the crops under review (e.g. corn face with the low gap of demand and the ability of domestic production in limiting the imports is low. Therefore, a significant portion of these products are imported from abroad. Given that the country is faced with a crisis of drought and water shortage problems, the price policies cannot eliminate this problem and help stabilize the market by encouraging increased production Thus, they lead to increased demand for imports. Under such circumstances, the only way to increase production in the country is enhancement of productivity in the agricultural sector. Of course, this is only possible in the long run. For products such as rice and meat the elasticity of substitution of domestic production with imports is small. In other words, if a policy is adopted that results in an increase in the price of these products, the share of these products of the total imports does not increase that much in comparison with other products. To support these products, policies can be used such as import tariffs in the short run

  7. Semipalatinsk test site: Parameters of radionuclide transfer to livestock and poultry products under actual radioactive contamination

    Energy Technology Data Exchange (ETDEWEB)

    Baigazinov, Z.; Lukashenko, S. [Institute of Radiation Safety and Ecology (Kazakhstan)

    2014-07-01

    The IAEA document 'Handbook of Parameter Values for the Prediction of Radionuclide Transfer in Terrestrial and Freshwater Environments' published in 2010 is one of the major sources of knowledge about the migration parameters of radionuclides in the agro-ecosystems that is necessary to assess the dose loads to the population. It is known from there that Sr and Cs transfer has been studied thoroughly, however the factors vary over a wide range. Few studies were conducted for Pu and Am transfer. It should be noted that the studies carried out in real conditions of radioactive contamination, i.e. under natural conditions is also very few. In this regard, since 2007 the territory of the former Semipalatinsk Test Site has been used for comprehensive radioecological studies, where the major radionuclides to be investigated are {sup 90}Sr, {sup 137}Cs, {sup 239+240}Pu, {sup 241}Am. The objects for these studies are birds and animals typical for the region, as well as products obtained from them (lamb, beef, horse meat, chicken, pork, cow's milk, mare's milk, eggs, chicken, chicken feathers, wool, leather). It should be noted that these products are the main agricultural goods that are available in these areas. The studies have been conducted with grazing animals in the most contaminated areas of the test site. Some groups of animals and birds were fed to contaminated feed, soil, contaminated water. Radionuclide intake by animal body with air were studied. Husbandry periods for animals and birds ranged from 1 to 150 days. The transfer parameters to cow and mare's milk have been investigated at single and prolonged intake of radionuclides, also their excretion dynamics has been studied. The studies revealed features of the radionuclide transfer into organs and tissues of animals and birds intaken with hay, water and soil. The results showed that the transfer factors vary up to one order. A relationship has been identified between distribution of

  8. Dynamics of antigen presentation to transgene product-specific CD4+ T cells and of Treg induction upon hepatic AAV gene transfer

    Directory of Open Access Journals (Sweden)

    George Q Perrin

    2016-01-01

    Full Text Available The tolerogenic hepatic microenvironment impedes clearance of viral infections but is an advantage in viral vector gene transfer, which often results in immune tolerance induction to transgene products. Although the underlying tolerance mechanism has been extensively studied, our understanding of antigen presentation to transgene product-specific CD4+ T cells remains limited. To address this, we administered hepatotropic adeno-associated virus (AAV8 vector expressing cytoplasmic ovalbumin (OVA into wt mice followed by adoptive transfer of transgenic OVA-specific T cells. We find that that the liver-draining lymph nodes (celiac and portal are the major sites of MHC II presentation of the virally encoded antigen, as judged by in vivo proliferation of DO11.10 CD4+ T cells (requiring professional antigen-presenting cells, e.g., macrophages and CD4+CD25+FoxP3+ Treg induction. Antigen presentation in the liver itself contributes to activation of CD4+ T cells egressing from the liver. Hepatic-induced Treg rapidly disseminate through the systemic circulation. By contrast, a secreted OVA transgene product is presented in multiple organs, and OVA-specific Treg emerge in both the thymus and periphery. In summary, liver draining lymph nodes play an integral role in hepatic antigen presentation and peripheral Treg induction, which results in systemic regulation of the response to viral gene products.

  9. Research Results Transfer towards the Productive Sector via Research Collaboration in Four Colombian Public Universities

    Directory of Open Access Journals (Sweden)

    Maria Eugenia Morales Rubiano

    2015-12-01

    Full Text Available This article shows the determining factors in the research results transfer towards the productive sector via research collaboration in four Colombian public universities. Thirty heads of units in the aforementioned universities were interviewed, which served to determine eleven cases of study and conduct interviews with thirty-five participants ranging from researchers, participant in formation and business people, in each case, it was found that especially in the last decade universities have turned to creating capacities for research collaboration as well as an openness in participants to create links that not only go in favor of enriching the productive sector but also in strengthening formation and research processes. It was concluded that there is a recent growing interest in the different actors in strengthening the bonds between the universities and the productive sector, though there may be some difficulties in the process of research collaboration due to the lack of an appropriate regulatory framework.

  10. Strengthening Adoption Practice, Listening to Adoptive Families

    Science.gov (United States)

    Atkinson, Anne; Gonet, Patricia

    2007-01-01

    In-depth interviews with 500 adoptive families who received postadoption services through Virginia's Adoptive Family Preservation (AFP) program paint a richly detailed picture of the challenges adoptive families face and what they need to sustain adoption for many years after finalization. Findings document the need for support in a variety of…

  11. Spin transfers for baryon production in polarized pp collisions at RHIC-BNL

    International Nuclear Information System (INIS)

    Ma BoQiang; Schmidt, Ivan; Soffer, Jacques; Yang Jianjun

    2002-01-01

    We consider the inclusive production of longitudinally polarized baryons in p→p collisions at RHIC-BNL, with one longitudinally polarized proton. We study the spin transfer between the initial proton and the produced baryon as a function of its rapidity and we elucidate its sensitivity to the quark helicity distributions of the proton and to the polarized fragmentation functions of the quark into the baryon. We make predictions using an SU(6) quark spectator model and a perturbative QCD (pQCD) based model. We discuss these different predictions, and what can be learned from them, in view of the forthcoming experiments at RHIC-BNL

  12. An Epigenetic Modifier Results in Improved In Vitro Blastocyst production after Somatic Cell Nuclear Transfer

    DEFF Research Database (Denmark)

    Zhang, Yunhai; Li, Juan; Villemoes, Klaus

    2007-01-01

    The present study was designed to examine the effect of trichostatin A (TSA), an inhibitor of histone deacetylase, on development of porcine cloned embryos. Our results showed that treatment of cloned embryos derived from sow oocytes with 50 nM TSA for up to 24 h after the onset of activation cou...... were tested, and for all cell lines an enhancement in blastocyst development compared to their corresponding control was observed. Our data demonstrate that TSA treatment after somatic cell nuclear transfer in the pig can significantly improve the in vitro blastocyst production...

  13. Immune response in mice to ingested soya protein: antibody production, oral tolerance and maternal transfer

    DEFF Research Database (Denmark)

    Christensen, Hanne Risager; Pedersen, Susanne Brix; Frøkiær, Hanne

    2004-01-01

    antibody response in the offspring, bat in this case in the absence of oral tolerance. This indicates that, under certain conditions, factors involved in spontaneous antibody production can be transmitted from mother to offspring. Understanding the immune response to soya protein ingested under healthy...... by ELISA, and to the presence of oral tolerance detected as a suppressed antibody and cell-proliferation response upon immunisation with soya protein. F0 mice generated soya-specific antibodies, while oral tolerance to the same soya proteins was also clearly induced. When F0 dams were transferred to soya...

  14. Study of heat transfer parameters on rhodium target for 103Pd production

    International Nuclear Information System (INIS)

    Sadeghi, M.; Tenreiro, C.; Van den Winkel, P.

    2009-01-01

    The efficiency of cooling and the particle beam characteristics are important when high beam current irradiations are intended for production of radionuclides. The efficiency of cooling is determined by both the target carrier geometry and the flow rate of coolant, while the beam characteristics deal with the current density distribution on the irradiated surface area. Heat transfer on rhodium target to produce 103 Pd via the 103 Rh(p,n) 103 Pd reaction was investigated and the beam current was obtained more than 500 μA. (authors)

  15. Desiccation of adhering and biofilm Listeria monocytogenes on stainless steel: Survival and transfer to salmon products

    DEFF Research Database (Denmark)

    Hansen, Lisbeth Truelstrup; Vogel, Birte Fonnesbech

    2011-01-01

    The foodborne bacterial pathogen, Listeria monocytogenes, commonly contaminates foods during processing, where the microorganisms are potentially subjected to low relative humidity (RH) conditions for extended periods of time. The objective of this study was to examine survival during desiccation...... (43% RH and 15°C) of biofilm L. monocytogenes N53-1 cells on stainless steel coupons and to assess subsequent transfer to salmon products. Formation of static biofilm (2days at 100% RH and 15°C) prior to desiccation for 23days significantly (P...

  16. Methods to estimate the transfer of contaminants into recycling products - A case study from Austria.

    Science.gov (United States)

    Knapp, Julika; Allesch, Astrid; Müller, Wolfgang; Bockreis, Anke

    2017-11-01

    Recycling of waste materials is desirable to reduce the consumption of limited primary resources, but also includes the risk of recycling unwanted, hazardous substances. In Austria, the legal framework demands secondary products must not present a higher risk than comparable products derived from primary resources. However, the act provides no definition on how to assess this risk potential. This paper describes the development of different quantitative and qualitative methods to estimate the transfer of contaminants in recycling processes. The quantitative methods comprise the comparison of concentrations of harmful substances in recycling products to corresponding primary products and to existing limit values. The developed evaluation matrix, which considers further aspects, allows for the assessment of the qualitative risk potential. The results show that, depending on the assessed waste fraction, particular contaminants can be critical. Their concentrations were higher than in comparable primary materials and did not comply with existing limit values. On the other hand, the results show that a long-term, well-established quality control system can assure compliance with the limit values. The results of the qualitative assessment obtained with the evaluation matrix support the results of the quantitative assessment. Therefore, the evaluation matrix can be suitable to quickly screen waste streams used for recycling to estimate their potential environmental and health risks. To prevent the transfer of contaminants into product cycles, improved data of relevant substances in secondary resources are necessary. In addition, regulations for material recycling are required to assure adequate quality control measures, including limit values. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Documentary Credit Transfer and Other Financing from What Can Match as Product of Credit

    Directory of Open Access Journals (Sweden)

    Libardo Quintero Salazar

    2016-12-01

    Full Text Available When a contract of international sale of goods is mediated by a form of payment as the documentary credit, exporters that initially lack financial resources to produce or obtain merchandise that then will be delivered to the importer, look as first natural possibility of financing the transfer for the documentary credit. Now not always the credit can be transferable in accordance with the Uniform Customs and Practice for Documentary Credits (UCP – because, for example, the importer or the financial entity do not want it in that way. Given the above scenario, this article aims to provide solutions, explaining legal alternatives for the exporter that is not in the UCP-, to use the money that might correspond as a result of the documentary credit, to finance the production or acquisition of goods against other traders, and then reselling them to the importer. It concludes that the exporter can achieve such immediate funding - similar to what encourage the transfer of documentary credit - using to their relations with the supplier, figures as the assignment of a future credit, banker’s acceptance and contract terms.

  18. Mass transfer of corrosion products in high temperature, high pressure water circuits

    International Nuclear Information System (INIS)

    Rodd, J.T.; Nicholson, F.D.

    1976-01-01

    The CWL-3 loop is used to study the mass transfer of corrosion products in water at 270 0 C for pressures up to 6.9 MPa. Two parallel Zircaloy-2 test sections are heated directly by a low voltage a.c. electrical current to give a heat flux up to 500 W cm -2 and a heat rating up to 1500 W cm -1 . Coolant flow rates can be varied up to 0.4 kg cm -2 s -1 with or without boiling. A tracer technique has been developed to monitor continuously the deposition of corrosion products in the test sections during operation of the loop. Magnetite deposits 2.6 nm thick can be readily detected. (author)

  19. Hospital-based nurses' perceptions of the adoption of Web 2.0 tools for knowledge sharing, learning, social interaction and the production of collective intelligence.

    Science.gov (United States)

    Lau, Adela S M

    2011-11-11

    Web 2.0 provides a platform or a set of tools such as blogs, wikis, really simple syndication (RSS), podcasts, tags, social bookmarks, and social networking software for knowledge sharing, learning, social interaction, and the production of collective intelligence in a virtual environment. Web 2.0 is also becoming increasingly popular in e-learning and e-social communities. The objectives were to investigate how Web 2.0 tools can be applied for knowledge sharing, learning, social interaction, and the production of collective intelligence in the nursing domain and to investigate what behavioral perceptions are involved in the adoption of Web 2.0 tools by nurses. The decomposed technology acceptance model was applied to construct the research model on which the hypotheses were based. A questionnaire was developed based on the model and data from nurses (n = 388) were collected from late January 2009 until April 30, 2009. Pearson's correlation analysis and t tests were used for data analysis. Intention toward using Web 2.0 tools was positively correlated with usage behavior (r = .60, P Web 2.0 tools and enable them to better plan the strategy of implementation of Web 2.0 tools for knowledge sharing, learning, social interaction, and the production of collective intelligence.

  20. Hospital-Based Nurses’ Perceptions of the Adoption of Web 2.0 Tools for Knowledge Sharing, Learning, Social Interaction and the Production of Collective Intelligence

    Science.gov (United States)

    2011-01-01

    Background Web 2.0 provides a platform or a set of tools such as blogs, wikis, really simple syndication (RSS), podcasts, tags, social bookmarks, and social networking software for knowledge sharing, learning, social interaction, and the production of collective intelligence in a virtual environment. Web 2.0 is also becoming increasingly popular in e-learning and e-social communities. Objectives The objectives were to investigate how Web 2.0 tools can be applied for knowledge sharing, learning, social interaction, and the production of collective intelligence in the nursing domain and to investigate what behavioral perceptions are involved in the adoption of Web 2.0 tools by nurses. Methods The decomposed technology acceptance model was applied to construct the research model on which the hypotheses were based. A questionnaire was developed based on the model and data from nurses (n = 388) were collected from late January 2009 until April 30, 2009. Pearson’s correlation analysis and t tests were used for data analysis. Results Intention toward using Web 2.0 tools was positively correlated with usage behavior (r = .60, P Web 2.0 tools and enable them to better plan the strategy of implementation of Web 2.0 tools for knowledge sharing, learning, social interaction, and the production of collective intelligence. PMID:22079851

  1. Bidirectional transfer between joint and individual actions in a task of discrete force production.

    Science.gov (United States)

    Masumoto, Junya; Inui, Nobuyuki

    2017-07-01

    The present study examined bidirectional learning transfer between joint and individual actions involving discrete isometric force production with the right index finger. To examine the effects of practice of joint action on performance of the individual action, participants performed a pre-test (individual condition), practice blocks (joint condition), and a post-test (individual condition) (IJI task). To examine the effects of practice of the individual action on performance during the joint action, the participants performed a pre-test (joint condition), practice blocks (individual condition), and a post-test (joint condition) (JIJ task). Whereas one participant made pressing movements with a target peak force of 10% maximum voluntary contraction (MVC) in the individual condition, two participants produced the target force of the sum of 10% MVC produced by each of them in the joint condition. In both the IJI and JIJ tasks, absolute errors and standard deviations of peak force were smaller post-test than pre-test, indicating bidirectional transfer between individual and joint conditions for force accuracy and variability. Although the negative correlation between forces produced by two participants (complementary force production) became stronger with practice blocks in the IJI task, there was no difference between the pre- and post-tests for the negative correlation in the JIJ task. In the JIJ task, the decrease in force accuracy and variability during the individual action did not facilitate complementary force production during the joint action. This indicates that practice performed by two people is essential for complementary force production in joint action.

  2. Cassava: constraints to production and the transfer of biotechnology to African laboratories.

    Science.gov (United States)

    Bull, Simon E; Ndunguru, Joseph; Gruissem, Wilhelm; Beeching, John R; Vanderschuren, Hervé

    2011-05-01

    Knowledge and technology transfer to African institutes is an important objective to help achieve the United Nations Millennium Development Goals. Plant biotechnology in particular enables innovative advances in agriculture and industry, offering new prospects to promote the integration and dissemination of improved crops and their derivatives from developing countries into local markets and the global economy. There is also the need to broaden our knowledge and understanding of cassava as a staple food crop. Cassava (Manihot esculenta Crantz) is a vital source of calories for approximately 500 million people living in developing countries. Unfortunately, it is subject to numerous biotic and abiotic stresses that impact on production, consumption, marketability and also local and country economics. To date, improvements to cassava have been led via conventional plant breeding programmes, but with advances in molecular-assisted breeding and plant biotechnology new tools are being developed to hasten the generation of improved farmer-preferred cultivars. In this review, we report on the current constraints to cassava production and knowledge acquisition in Africa, including a case study discussing the opportunities and challenges of a technology transfer programme established between the Mikocheni Agricultural Research Institute in Tanzania and Europe-based researchers. The establishment of cassava biotechnology platform(s) should promote research capabilities in African institutions and allow scientists autonomy to adapt cassava to suit local agro-ecosystems, ultimately serving to develop a sustainable biotechnology infrastructure in African countries.

  3. Academic medical product development: an emerging alliance of technology transfer organizations and the CTSA.

    Science.gov (United States)

    Rose, Lynn M; Everts, Maaike; Heller, Caren; Burke, Christine; Hafer, Nathaniel; Steele, Scott

    2014-12-01

    To bring the benefits of science more quickly to patient care, the NIH National Center Advancing Translational Sciences (NCATS) supports programs that enhance the development, testing, and implementation of new medical products and procedures. The NCATS clinical and translational science award (CTSA) program is central to that mission; creating an academic home for clinical and translational science and supporting those involved in the discovery and development of new health-related inventions. The technology transfer Offices (TTO) of CTSA-funded universities can be important partners in the development process; facilitating the transfer of medical research to the commercial sector for further development and ultimately, distribution to patients. The Aggregating Intellectual Property (IP) Working Group (AWG) of the CTSA public private partnerships key function committee (PPP-KFC) developed a survey to explore how CTSA-funded institutions currently interface with their respective TTOs to support medical product development. The results suggest a range of relationships across institutions; approximately half have formal collaborative programs, but only a few have well-connected programs. Models of collaborations are described and provided as examples of successful CTSA/TTO partnerships that have increased the value of health-related inventions as measured by follow-on funding and industry involvement; either as a consulting partner or licensee. © 2014 Wiley Periodicals, Inc.

  4. LiCl-KCl-UCl3 Salt production and Transfer for the Uranium Electrorefining

    International Nuclear Information System (INIS)

    Woo, Moon Sik; Kang, Hee Suk; Lee, Han Soo

    2009-01-01

    A pyrometallurgical partitioning technology to recover uranium from an uranium-TRU mixture which is the product material of electroreduction system is being developed at KAERI since 1997. In the process, the reactor of an electrorefiner consists of the electrodes and the molten chloride salt which is LiCl-KCl-UCl 3 . The role of uranium chloride salt (UCl 3 ) is to stabilize the initial cell voltage between electrodes in the electrorefining reactor. The process to produce a uranium chloride salt includes two steps: a reaction process of gaseous chlorine with liquid cadmium to form the CdCl 2 occurring in a Cd layer, followed by a process to produce UCl 3 by the reaction of U in the LiCl-KCl eutectic salt and CdCl 2 . The apparatus for producing UCl 3 consists of a chlorine gas generator, a chlorinator, and a off-gas wet scrubber. The temperature of the reactants are maintained at about 600 .deg. C . After the reaction is completed, the product salt is transferred from the vessel to the electrorefiner by a transfer system

  5. A Diagnosis of Biophysical and Socio-Economic Factors Influencing Farmers' Choice to Adopt Organic or Conventional Farming Systems for Cotton Production.

    Science.gov (United States)

    Riar, Amritbir; Mandloi, Lokendra S; Poswal, Randhir S; Messmer, Monika M; Bhullar, Gurbir S

    2017-01-01

    Organic agriculture is one of the most widely known alternative production systems advocated for its benefits to soil, environment, health and economic well-being of farming communities. Rapid increase in the market demand for organic products presents a remarkable opportunity for expansion of organic agriculture. A thorough understanding of the context specific motivations of farmers for adoption of organic farming systems is important so that appropriate policy measures are put in place. With an aim of understanding the social and biophysical motivations of organic and conventional cotton farmers for following their respective farming practices, a detailed farm survey was conducted in Nimar valley of Madhya Pradesh state in central India. The study area was chosen for being an important region for cotton production, where established organic and conventional farms operate under comparable circumstances. We found considerable variation among organic and conventional farmers for their social and biophysical motivations. Organic farmers were motivated by the sustainability of cotton production and growing safer food without pesticides, whereas conventional farmers were sensitive about their reputation in community. Organic farmers with larger holdings were more concerned about closed nutrient cycles and reducing their dependence on external inputs, whereas medium and small holding organic farmers were clearly motivated by the premium price of organic cotton. Higher productivity was the only important motivation for conventional farmers with larger land holdings. We also found considerable yield gaps among different farms, both under conventional and organic management, that need to be addressed through extension and training. Our findings suggest that research and policy measures need to be directed toward strengthening of extension services, local capacity building, enhancing availability of suitable inputs and market access for organic farmers.

  6. A Diagnosis of Biophysical and Socio-Economic Factors Influencing Farmers’ Choice to Adopt Organic or Conventional Farming Systems for Cotton Production

    Directory of Open Access Journals (Sweden)

    Amritbir Riar

    2017-07-01

    Full Text Available Organic agriculture is one of the most widely known alternative production systems advocated for its benefits to soil, environment, health and economic well-being of farming communities. Rapid increase in the market demand for organic products presents a remarkable opportunity for expansion of organic agriculture. A thorough understanding of the context specific motivations of farmers for adoption of organic farming systems is important so that appropriate policy measures are put in place. With an aim of understanding the social and biophysical motivations of organic and conventional cotton farmers for following their respective farming practices, a detailed farm survey was conducted in Nimar valley of Madhya Pradesh state in central India. The study area was chosen for being an important region for cotton production, where established organic and conventional farms operate under comparable circumstances. We found considerable variation among organic and conventional farmers for their social and biophysical motivations. Organic farmers were motivated by the sustainability of cotton production and growing safer food without pesticides, whereas conventional farmers were sensitive about their reputation in community. Organic farmers with larger holdings were more concerned about closed nutrient cycles and reducing their dependence on external inputs, whereas medium and small holding organic farmers were clearly motivated by the premium price of organic cotton. Higher productivity was the only important motivation for conventional farmers with larger land holdings. We also found considerable yield gaps among different farms, both under conventional and organic management, that need to be addressed through extension and training. Our findings suggest that research and policy measures need to be directed toward strengthening of extension services, local capacity building, enhancing availability of suitable inputs and market access for organic farmers.

  7. High cell density fed-batch fermentations for lipase production: feeding strategies and oxygen transfer.

    Science.gov (United States)

    Salehmin, M N I; Annuar, M S M; Chisti, Y

    2013-11-01

    This review is focused on the production of microbial lipases by high cell density fermentation. Lipases are among the most widely used of the enzyme catalysts. Although lipases are produced by animals and plants, industrial lipases are sourced almost exclusively from microorganisms. Many of the commercial lipases are produced using recombinant species. Microbial lipases are mostly produced by batch and fed-batch fermentation. Lipases are generally secreted by the cell into the extracellular environment. Thus, a crude preparation of lipases can be obtained by removing the microbial cells from the fermentation broth. This crude cell-free broth may be further concentrated and used as is, or lipases may be purified from it to various levels. For many large volume applications, lipases must be produced at extremely low cost. High cell density fermentation is a promising method for low-cost production: it allows a high concentration of the biomass and the enzyme to be attained rapidly and this eases the downstream recovery of the enzyme. High density fermentation enhances enzyme productivity compared with the traditional submerged culture batch fermentation. In production of enzymes, a high cell density is generally achieved through fed-batch operation, not through perfusion culture which is cumbersome. The feeding strategies used in fed-batch fermentations for producing lipases and the implications of these strategies are discussed. Most lipase-producing microbial fermentations require oxygen. Oxygen transfer in such fermentations is discussed.

  8. Hydrogen production by using Rhodobacter capsulatus mutants with genetically modified electron transfer chains

    Energy Technology Data Exchange (ETDEWEB)

    OEztuerk, Yavuz; Yuecel, Meral; Guenduez, Ufuk [Department of Biology, Middle East Technical University, Ankara (Turkey); Daldal, Fevzi [Department of Biology, Plant Science Institute, University of Pennsylvania, Philadelphia, PA 19104-6018 (United States); Mandaci, Sevnur [TUEBITAK Research Institute for Genetic Engineering and Biotechnology, Gebze Kocaeli 41470 (Turkey); Tuerker, Lemi [Department of Chemistry, Middle East Technical University, Ankara (Turkey); Eroglu, Inci [Department of Chemical Engineering, Middle East Technical University, Ankara (Turkey)

    2006-09-15

    In Rhodobacter capsulatus excess reducing equivalents generated by organic acid oxidation is consumed to reduce protons into hydrogen by the activity of nitrogenase. Nitrogenase serves as a redox-balancing tool and is activated by the RegB/RegA global regulatory system during photosynthetic growth. The terminal cytochrome cbb{sub 3} oxidase and the redox state of the cyclic photosynthetic electron transfer chain serve redox signaling to the RegB/RegA regulatory systems in Rhodobacter. In this study, hydrogen production of various R. capsulatus strains harboring the genetically modified electron carrier cytochromes or lacking the cyt cbb{sub 3} oxidase or the quinol oxidase were compared with the wild type. The results indicated that hydrogen production of mutant strains with modified electron carrier cytochromes decreased 3- to 4-fold, but the rate of hydrogen production increased significantly in a cbb{sub 3}{sup -} mutant. Moreover, hydrogen production efficiency of various R. capsulatus strains further increased by inactivation of uptake hydrogenase genes. (author)

  9. Potential of anaerobic digestion for mitigation of greenhouse gas emissions and production of renewable energy from agriculture: barriers and incentives to widespread adoption in Europe.

    Science.gov (United States)

    Banks, C J; Salter, A M; Chesshire, M

    2007-01-01

    The paper considers the role of anaerobic digestion in promoting good agricultural practice on farms and the contribution this would make to reducing the environmental impacts associated with manure management. There are no regulatory drivers to promote the use of digestion in Europe, and the technology has only been widely adopted where economic drivers and coherent policies have been implemented at a national level. These measures have included direct subsidy on the energy price paid for "green electricity", and exemption of tax when biogas is used as a vehicle fuel. In those countries where financial incentives are not available or where a financial penalty is incurred through the regulatory regime, the uptake of digestion has been poor. Even with subsidies, digestion of animal manures as a single substrate is not common, and countries with successful schemes have achieved this either by permitting the import of wastes onto the farm or offering bonus subsidies for the use of energy crops. Both of these measures improve the energy efficiency of the process by increasing the volumetric methane production, although concerns are expressed that attention could concentrate on energy production at the expense of improving manure management.

  10. Heat and Mass Transfer Measurements for Tray-Fermented Fungal Products

    Science.gov (United States)

    Jou, R.-Y.; Lo, C.-T.

    2011-01-01

    In this study, heat and mass transfer in static tray fermentation, which is widely used in solid-state fermentation (SSF) to produce fungal products, such as enzymes or koji, is investigated. Specifically, kinetic models of transport phenomena in the whole-tray chamber are emphasized. The effects of temperature, moisture, and humidity on microbial growth in large-scale static tray fermentation are essential to scale-up SSF and achieve uniform fermentation. In addition, heat and mass transfer of static tray fermentation of Trichoderma fungi with two tray setups—traditional linen coverings and stacks in a temperature-humidity chamber is examined. In both these setups, the following factors of fermentation were measured: air velocity, air temperature, illumination, pH, carbon dioxide (CO2) concentration, and substrate temperature, and the effects of bed height, moisture of substrate, and relative humidity of air are studied. A thin (1 cm) bed at 28 °C and 95 % relative humidity is found to be optimum. Furthermore, mixing was essential for achieving uniform fermentation of Trichoderma fungi. This study has important applications in large-scale static tray fermentation of fungi.

  11. Production of isomers in compound and transfer reactions with 4He ions

    International Nuclear Information System (INIS)

    Karamyan, S.A.; Aksenov, N.V.; Albin, Yu.A.; Bozhikov, G.A.; Dmitriev, S.N.; Starodub, G.Ya.; Vostokin, G.K.; Carroll, J.J.

    2011-01-01

    A well-known island of nuclear isomerism appears near A = 175-180 due to the deformation alignment of single-particle orbits at high angular momentum. This sometimes results in the formation of multi-quasiparticle states with record spin that are long-lived because of 'K-hindrance', i.e., symmetry rearrangement. Production methods and spectroscopic studies of these isomers remain a challenge for modern nuclear reaction and nuclear structure physics. Activities were produced by irradiation of 176 Yb(97.6%) enriched and nat Lu targets with 35-MeV 4 He ions from the internal beam of the U200 cyclotron. Induced activities were analyzed applying methods of radiochemistry and gamma spectroscopy. Yields of compound and nucleon-transfer reactions were measured and the isomer-to-ground state ratios were deduced. Calculated results were obtained using standard procedures to reproduce the (α, xn) cross sections, and the systematic behavior of the nucleon-transfer yields was established. The isomer-to-ground state ratios for direct reactions with 4 He ions were examined, resulting in a new characterization of the reaction mechanism

  12. Desiccation of adhering and biofilm Listeria monocytogenes on stainless steel: Survival and transfer to salmon products.

    Science.gov (United States)

    Hansen, Lisbeth Truelstrup; Vogel, Birte Fonnesbech

    2011-03-15

    The foodborne bacterial pathogen, Listeria monocytogenes, commonly contaminates foods during processing, where the microorganisms are potentially subjected to low relative humidity (RH) conditions for extended periods of time. The objective of this study was to examine survival during desiccation (43% RH and 15 °C) of biofilm L. monocytogenes N53-1 cells on stainless steel coupons and to assess subsequent transfer to salmon products. Formation of static biofilm (2 days at 100% RH and 15 °C) prior to desiccation for 23 days significantly (Pbiofilm cells also desiccated in low salt, indicating the protective effect of the biofilm matrix. Osmoadaptation of cells in 5% NaCl before formation of the static biofilm significantly (Pbiofilm cells was significantly (Pbiofilm bacteria, however, as biofilm formation enhanced desiccation survival more bacteria were still transferred to smoked and fresh salmon. In conclusion, the current work shows the protective effect of biofilm formation, salt and osmoadaptation on the desiccation survival of L. monocytogenes, which in turn increases the potential for cross-contamination during food processing. Copyright © 2011 Elsevier B.V. All rights reserved.

  13. Effects of an applied voltage on direct interspecies electron transfer via conductive materials for methane production.

    Science.gov (United States)

    Lee, Jung-Yeol; Park, Jeong-Hoon; Park, Hee-Deung

    2017-10-01

    Direct interspecies electron transfer (DIET) between exoelectrogenic bacteria and methanogenic archaea via conductive materials is reported as an efficient method to produce methane in anaerobic organic waste digestion. A voltage can be applied to the conductive materials to accelerate the DIET between two groups of microorganisms to produce methane. To evaluate this hypothesis, two sets of anaerobic serum bottles with and without applied voltage were used with a pair of graphite rods as conductive materials to facilitate DIET. Initially, the methane production rate was similar between the two sets of serum bottles, and later the serum bottles with an applied voltage of 0.39V showed a 168% higher methane production rate than serum bottles without an applied voltage. In cyclic voltammograms, the characteristic redox peaks for hydrogen and acetate oxidation were identified in the serum bottles with an applied voltage. In the microbial community analyses, hydrogenotrophic methanogens (e.g. Methanobacterium) were observed to be abundant in serum bottles with an applied voltage, while methanogens utilizing carbon dioxide (e.g., Methanosaeta and Methanosarcina) were dominant in serum bottles without an applied voltage. Taken together, the applied voltage on conductive materials might not be effective to promote DIET in methane production. Instead, it appeared to generate a condition for hydrogenotrophic methanogenesis. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. 2- and 3-Monochloropropanediols in paper products and their transfer to foods.

    Science.gov (United States)

    Becalski, Adam; Zhao, Tony; Breton, Francois; Kuhlmann, Jan

    2016-09-01

    The occurrence of 2- and 3-monochloropropanediol (MCPDs) in selected paper products sold on the Canadian market and the transfer of 3-MCPD from those products to beverages was probed. Products included coffee filters, tea bags, disposable paper hot beverage cups and milk packaged in paperboard containers. The occurrence MCPDs in coffee and tea filters on the German market was investigated as well. Furthermore, the presence of MCPDs in paper towels on the German market was also investigated. Analytes were determined by stable isotope dilution analysis GC-MS in SIM mode. 3-MCPD was detected in most paper products with levels ranging from a few nanograms in tea bags to a few micrograms in white coffee filters. Milk containers' paperboard contained 3-MCPD at about 500-1500 ng g(-1); however, 3-MCPD was detected in milk only in smaller containers, 237-500 ml (likely due to a lower volume/surface ratio) at levels of about 1 ng g(-1). Out of three disposable hot beverage paper cups tested (of 237-473 ml capacity), paperboard of two contained 3-MCPD at 632-792 ng g(-1), and 3-MCPD was detected in leachate from those paper cups at levels of about 16 ng per cup. 3-MCPD was detected in all paper towels at levels of 42-2466 ng g(-1). 2-MCPD was detected in many paper products (from Canadian and German sources) and in all the towels tested at levels varying from about 0.5-10% of that of 3-MCPD.

  15. SAVEC application for 137Cs transfer from soil to food products consumed by Polish population

    International Nuclear Information System (INIS)

    Krajewski, P.

    2002-01-01

    During the 3-years period of the project a modelling approach to predict geographical variation in radionuclide behaviour and identify areas that are particularly vulnerable to radioactive contamination has been developed in the Institute of Terrestrial Ecology and Institute of Environmental Science, University of Nottingham (UK). The SAVEC-IT software system has been successfully modified for application in the Poland, Czech Republic and Hungary, with input spatial databases of soil properties, land cover, agricultural production and diets from national data sets. Two examples of the model application are presented: for determination of areas in Poland of elevated radiocesium 137 Cs fluxes and for identifying potential critical groups in Poland based on dietary preferences and consumption data. Overall, the project demonstrated the usefulness of the SAVEC-IT system in allowing improved estimates of both individual and collective doses by incorporation of spatial variation in radiocesium transfer. (author)

  16. Adopted Children and Discipline

    Science.gov (United States)

    ... Family Dynamics > Adoption & Foster Care > Adopted Children & Discipline Family Life ... are the reasons for these patterns of parental inaction? Some adoptive parents are afraid their youngster might stop loving ...

  17. Genetic ablation or chemical inhibition of phosphatidylcholine transfer protein attenuates diet-induced hepatic glucose production.

    Science.gov (United States)

    Shishova, Ekaterina Y; Stoll, Janis M; Ersoy, Baran A; Shrestha, Sudeep; Scapa, Erez F; Li, Yingxia; Niepel, Michele W; Su, Ya; Jelicks, Linda A; Stahl, Gregory L; Glicksman, Marcie A; Gutierrez-Juarez, Roger; Cuny, Gregory D; Cohen, David E

    2011-08-01

    Phosphatidylcholine transfer protein (PC-TP, synonym StARD2) is a highly specific intracellular lipid binding protein that is enriched in liver. Coding region polymorphisms in both humans and mice appear to confer protection against measures of insulin resistance. The current study was designed to test the hypotheses that Pctp-/- mice are protected against diet-induced increases in hepatic glucose production and that small molecule inhibition of PC-TP recapitulates this phenotype. Pctp-/- and wildtype mice were subjected to high-fat feeding and rates of hepatic glucose production and glucose clearance were quantified by hyperinsulinemic euglycemic clamp studies and pyruvate tolerance tests. These studies revealed that high-fat diet-induced increases in hepatic glucose production were markedly attenuated in Pctp-/- mice. Small molecule inhibitors of PC-TP were synthesized and their potencies, as well as mechanism of inhibition, were characterized in vitro. An optimized inhibitor was administered to high-fat-fed mice and used to explore effects on insulin signaling in cell culture systems. Small molecule inhibitors bound PC-TP, displaced phosphatidylcholines from the lipid binding site, and increased the thermal stability of the protein. Administration of the optimized inhibitor to wildtype mice attenuated hepatic glucose production associated with high-fat feeding, but had no activity in Pctp-/- mice. Indicative of a mechanism for reducing glucose intolerance that is distinct from commonly utilized insulin-sensitizing agents, the inhibitor promoted insulin-independent phosphorylation of key insulin signaling molecules. These findings suggest PC-TP inhibition as a novel therapeutic strategy in the management of hepatic insulin resistance. Copyright © 2011 American Association for the Study of Liver Diseases.

  18. Application of improved management and nutrition technologies for small-holder dairy production and their adoption by farmers in developing countries

    International Nuclear Information System (INIS)

    Bryant, M.J.

    2002-01-01

    their cows. The problems faced by small-scale dairy farmers are diverse but some common threads emerge from a number of different studies. As well as the usual farmer concerns about the low prices received for their product and the high price of inputs, the availability of working capital appears to be a general anxiety. Poor feeding practices, partly consequent on weather but also a result of cash shortages, are widely recognised. Animal disease is also a general source of concern. It is clear from farmer consultations that farmers do respond to these problems with technical innovations appropriate to their resources. Often these innovations represent adaptations to the limited inputs available or affordable. Thus long inter calving intervals, probably a function of chronic under feeding as well as difficulties associated with bull availability, are countered by exploiting the long flat lactation curve associated with the failure of the cow to peak in early lactation as a result of the inadequate feeding. Cows are milked for many months, often with no intervening dry period between lactations. Although this maintains milk production, the production of replacement heifer calves is jeopardised by the long calving intervals, threatening the sustainability of small-scale dairying at both the household and national level. It follows from the above that small-scale dairy farmers have limited capacity for technical change. However, in some areas, the very adoption of small-scale dairying over the past few years is sufficiently novel to illustrate that its practitioners are prepared to adopt change if the proposals are considered feasible within the recognised constraints. Sometimes innovations fail to get to farmers because of inadequate extension services, although increasing access to the internet may signal rapid change in some regions. However, it is also clear that scepticism remains widespread. Recent studies indicate that, in some areas, extension services have limited

  19. The "local economy" effect of social transfers : an empirical assessment of the impactof th Bolsa Familia program on local productive structure and economic growth

    OpenAIRE

    Rougier, E.; Combarnous, F.; Fauré, Yves-André

    2018-01-01

    Social transfers impact local economic growth through local demand multiplier and local productive structures. Using original data on productive structures, growth determinants and Bolsa Familia conditional transfers (BFP) for the 184 municipalities of the Brazilian state of Ceará during 2003–10, we show that the positive impact of the transfers on local growth is in fact conditional on the direction of local economic structure transformation. Indeed, transfers did spur light manufactur...

  20. Les méthodesthermiques de production des hydrocarbures. Chapitre 1 : transfert de chaleur et de masse Thermal Methods of Hydrocarbon Production. Chapter 1 : Heat and Mass Transfer

    Directory of Open Access Journals (Sweden)

    Bia P.

    2006-11-01

    Full Text Available Après un rappel général sur le transfert de chaleur et de masse ainsi que sur les lois de conservation dans les milieux continus, on traite de l'adaptation de ces lois au cas des milieux poreux. On donne ensuite des informations quantitatives sur les grandeurs physiques mises en jeu par les phénomènes de transfert en milieu poreux. After making a general review of heat and mass transfer a well as of laws of conservation in continua, this chapter describes how these laws con be adopted to the case of porous media. Quantitative data are then given on the physical magnitudes brought into play by transfer phenomena in porous media.

  1. Identification of key factors in consumers' adoption behavior of intelligent medical terminals based on a hybrid modified MADM model for product improvement.

    Science.gov (United States)

    Liu, Yupeng; Chen, Yifei; Tzeng, Gwo-Hshiung

    2017-09-01

    As a new application technology of the Internet of Things (IoT), intelligent medical treatment has attracted the attention of both nations and industries through its promotion of medical informatisation, modernisation, and intelligentisation. Faced with a wide variety of intelligent medical terminals, consumers may be affected by various factors when making purchase decisions. To examine and evaluate the key influential factors (and their interrelationships) of consumer adoption behavior for improving and promoting intelligent medical terminals toward achieving set aspiration level in each dimension and criterion. A hybrid modified Multiple Attribute Decision-Making (MADM) model was used for this study, based on three components: (1) the Decision-Making Trial and Evaluation Laboratory (DEMATEL) technique, to build an influential network relationship map (INRM) at both 'dimensions' and 'criteria' levels; (2) the DEMATEL-based analytic network process (DANP) method, to determine the interrelationships and influential weights among the criteria and identify the source-influential factors; and (3) the modified Vlse Kriterijumska Optimizacija I Kompromisno Resenje (VIKOR) method, to evaluate and improve for reducing the performance gaps to meet the consumers' needs for continuous improvement and sustainable products-development. First, a consensus on the influential factors affecting consumers' adoption of intelligent medical terminals was collected from experts' opinion in practical experience. Next, the interrelationships and influential weights of DANP among dimensions/criteria based on the DEMATEL technique were determined. Finally, two intelligent medicine bottles (AdhereTech, A 1 alternative; and Audio/Visual Alerting Pillbox, A 2 alternative) were reviewed as the terminal devices to verify the accuracy of the MADM model and evaluate its performance on each criterion for improving the total certification gaps by systematics according to the modified VIKOR method

  2. Point Estimate Transfers in Ecosystem Services Research: Applying Principles from Economics to Improve the Transfer of Ecological Production Estimates

    Science.gov (United States)

    There is increasing demand to describe and account for the benefits that humans derive from ecosystem functions in decision-making. Comprehensive descriptions of these benefits, referred to as ecosystem services (ES), and their production can be limited because there is limited ...

  3. Convective heat transfer behavior of the product slurry of the nitrate to ammonia and ceramic (NAC) process

    International Nuclear Information System (INIS)

    Muguercia, I.; Yang, G.; Ebadian, M.A.

    1995-01-01

    The Nitrate to Ammonia and Ceramic (NAC) process is an innovative technology for immobilizing liquid form low level radioactive waste (LLW). An experimental study has been conducted to measure the heat transfer properties of the NAC product slurry. The results indicate that the heat transfer coefficient for both concentration slurries is much higher than that of pure water, which may be due to the higher conductivity of the gibbsite powder. For the 20% concentration slurry, the heat transfer coefficient increased as the generalized Reynolds number and slurry temperature increased. The heat transfer coefficient of 40% is a function of the Reynolds number only. The test results also indicate that the thermal entrance region can be observed only when the generalized Reynolds number is smaller than 1,000. The correlation equation is also developed based on the experimental data in this paper

  4. Study of the transfer of accidentally released radionuclides in agricultural products with the aim of developing appropriate countermeasures

    International Nuclear Information System (INIS)

    Kirchmann, R.

    1993-01-01

    The objective of the project is to define the countermeasures to be applied in order to improve the radiological quality of agricultural products after a major nuclear accident at a PWR type nuclear power plant. The two main phases of the project are: identification of sensitive soils and agricultural products in the near and intermediate fields; and experimental research to define the parameters and the methods to reduce the transfer along the soil-plant-animal foodchain and to investigate the possible use of industrial processes to reduce the level of radioactivity in the end-products of the plant and animal production. (R.P.) 2 refs., 2 figs., 3 tabs

  5. Modelling 3H and 14C transfer to farm animals and their products under steady state conditions

    International Nuclear Information System (INIS)

    Galeriu, D.; Melintescu, A.; Beresford, N.A.; Crout, N.M.J.; Peterson, R.; Takeda, H.

    2007-01-01

    The radionuclides 14 C and 3 H may both be released from nuclear facilities. These radionuclides are unusual, in that they are isotopes of macro-elements which form the basis of animal tissues, feed and, in the case of 3 H, water. There are few published values describing the transfer of 3 H and 14 C from feed to animal derived food products under steady state conditions. Approaches are described which enable the prediction of 14 C and 3 H transfer parameter values from readily available information on the stable H or C concentration of animal feeds, tissues and milk, water turnover rates, and feed intakes and digestibilities. We recommend that the concentration ratio between feed and animal product activity concentrations be used as it is less variable than the transfer coefficient (ratio between radionuclide activity concentration in animal milk or tissue to the daily intake of a radionuclide)

  6. Validation of accuracy and stability of numerical simulation for 2-D heat transfer system by an entropy production approach

    Directory of Open Access Journals (Sweden)

    Brohi Ali Anwar

    2017-01-01

    Full Text Available The entropy production in 2-D heat transfer system has been analyzed systematically by using the finite volume method, to develop new criteria for the numerical simulation in case of multidimensional systems, with the aid of the CFD codes. The steady-state heat conduction problem has been investigated for entropy production, and the entropy production profile has been calculated based upon the current approach. From results for 2-D heat conduction, it can be found that the stability of entropy production profile exhibits a better agreement with the exact solution accordingly, and the current approach is effective for measuring the accuracy and stability of numerical simulations for heat transfer problems.

  7. Agricultural production and sustainable development in a Brazilian region (Southwest, Sao Paulo State): motivations and barriers to adopting sustainable and ecologically friendly practices

    DEFF Research Database (Denmark)

    Leite, A. E.; De Castro, R.; Jabbour, C. J. C.

    2014-01-01

    The objective of this study is to identify the adoption level of practices associated with more sustainable agriculture and environmentally friendly practices. Additionally, the motivations for and barriers to the adoption of these practices by farmers are investigated. Data were collected through...... closed questionnaires taken by a random sample of farmers in the Southwest, Sao Paulo, Brazil, during the second half of 2013. Overall, sustainable agricultural practices recommended in the literature and analysed in this study are being not fully adopted by farmers of the studied area. The results...... showed that financial motivation is associated with farmers adopting new, more sustainable technology, whereas the lack of information on and lack of technical support for these technologies are significant barriers. Other results, research implications, limitations and suggestions for future research...

  8. Effective donor cell fusion conditions for production of cloned dogs by somatic cell nuclear transfer.

    Science.gov (United States)

    Park, JungEun; Oh, HyunJu; Hong, SoGun; Kim, MinJung; Kim, GeonA; Koo, OkJae; Kang, SungKeun; Jang, Goo; Lee, ByeongChun

    2011-03-01

    As shown by the birth of the first cloned dog 'Snuppy', a protocol to produce viable cloned dogs has been reported. In order to evaluate optimum fusion conditions for improving dog cloning efficiency, in vivo matured oocytes were reconstructed with adult somatic cells from a female Pekingese using different fusion conditions. Fusion with needle vs chamber methods, and with low vs high pulse strength was compared by evaluating fusion rate and in vivo development of canine cloned embryos. The fusion rates in the high voltage groups were significantly higher than in the low voltage groups regardless of fusion method (83.5 vs 66.1% for the needle fusion method, 67.4 vs 37.9% for the fusion chamber method). After embryo transfer, one each pregnancy was detected after using the needle fusion method with high and low voltage and in the chamber fusion method with high voltage, whereas no pregnancy was detected using the chamber method with low voltage. However, only the pregnancy from the needle fusion method with high voltage was maintained to term and one healthy puppy was delivered. The results of the present study demonstrated that two DC pulses of 3.8 to 4.0 kV/cm for 15 μsec using the needle fusion method were the most effective method for the production of cloned dogs under the conditions of this experiment. Copyright © 2011 Elsevier Inc. All rights reserved.

  9. Inclusive fitness and differential productivity across the life course determine intergenerational transfers in a small-scale human society.

    Science.gov (United States)

    Hooper, Paul L; Gurven, Michael; Winking, Jeffrey; Kaplan, Hillard S

    2015-03-22

    Transfers of resources between generations are an essential element in current models of human life-history evolution accounting for prolonged development, extended lifespan and menopause. Integrating these models with Hamilton's theory of inclusive fitness, we predict that the interaction of biological kinship with the age-schedule of resource production should be a key driver of intergenerational transfers. In the empirical case of Tsimane' forager-horticulturalists in Bolivian Amazonia, we provide a detailed characterization of net transfers of food according to age, sex, kinship and the net need of donors and recipients. We show that parents, grandparents and siblings provide significant net downward transfers of food across generations. We demonstrate that the extent of provisioning responds facultatively to variation in the productivity and demographic composition of families, as predicted by the theory. We hypothesize that the motivation to provide these critical transfers is a fundamental force that binds together human nuclear and extended families. The ubiquity of three-generational families in human societies may thus be a direct reflection of fundamental evolutionary constraints on an organism's life-history and social organization.

  10. Estimating Net Primary Productivity Beneath Snowpack Using Snowpack Radiative Transfer Modeling and Global Satellite Data

    Science.gov (United States)

    Barber, D. E.; Peterson, M. C.

    2002-05-01

    Sufficient photosynthetically active radiation (PAR) penetrates snow for plants to grow beneath snowpack during late winter or early spring in tundra ecosystems. During the spring in this ecosystem, the snowpack creates an environment with higher humidity and less variable and milder temperatures than on the snow-free land. Under these conditions, the amount of PAR available is likely to be the limiting factor for plant growth. Current methods for determining net primary productivity (NPP) of tundra ecosystems do not account for this plant growth beneath snowpack, apparently resulting in underestimating plant production there. We are currently in the process of estimating the magnitude of this early growth beneath snow for tundra ecosystems. Our method includes a radiative transfer model that simulates diffuse and direct PAR penetrating snowpack based on downwelling PAR values and snow depth data from global satellite databases. These PAR levels are convolved with plant growth for vegetation that thrives beneath snowpacks, such as lichen. We expect to present the net primary production for Cladonia species (a common Arctic lichen) that has the capability of photosynthesizing at low temperatures beneath snowpack. This method may also be used to study photosynthesis beneath snowpacks in other hardy plants. Lichens are used here as they are common in snow-covered regions, flourish under snowpack, and provide an important food source for tundra herbivores (e.g. caribou). In addition, lichens are common in arctic-alpine environments and our results can be applied to these ecosystems as well. Finally, the NPP of lichen beneath snowpack is relatively well understood compared to other plants, making it ideal vegetation for this first effort at estimating the potential importance of photosynthesis at large scales. We are examining other candidate plants for their photosynthetic potential beneath snowpack at this time; however, little research has been done on this topic. We

  11. Exploring the influence of technology size on the duration of production technology transfer implementation

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2005-01-01

    This study explores the relationship between technology size and installation time in technology transfer projects. A literature study revealed that the installation time has so far not received much attention. Current studies address the effectiveness of technology transfer rather than efficiency.

  12. Verification of radionuclide transfer factors to domestic-animal food products, using indigenous elements and with emphasis on iodine

    Energy Technology Data Exchange (ETDEWEB)

    Sheppard, S.C., E-mail: sheppards@ecomatters.co [ECOMatters Inc., WB Lewis Business Centre, 24 Aberdeen Avenue, Pinawa, Manitoba, R0E 1L0 (Canada); Long, J.M.; Sanipelli, B. [ECOMatters Inc., WB Lewis Business Centre, 24 Aberdeen Avenue, Pinawa, Manitoba, R0E 1L0 (Canada)

    2010-11-15

    Recent reviews have established benchmark values for transfer factors that describe radionuclide transfer from plants to animal food product such as milk, eggs and meat. They also illustrate the paucity of data for some elements and some food products. The present study quantified transfer data using indigenous elements measured in dairy, poultry and other livestock farms in Canada. Up to 62 elements are reported, with particular emphasis on iodine (I) because of the need to accurately assess the behaviour of {sup 129}I from disposal of nuclear fuel waste. There was remarkable agreement with the literature values, and for many elements the present study involved many more observations than were previously available. Perhaps the most important observation was that product/substrate concentration ratios (CR) were quite consistent across species, whereas the traditional fractional transfer factors (TF, units of d kg{sup -1} or d L{sup -1}) necessarily vary with body mass (feed intake). This suggests that for long-term assessments, it may be advisable to change the models to use CR rather than TF.

  13. Verification of radionuclide transfer factors to domestic-animal food products, using indigenous elements and with emphasis on iodine

    International Nuclear Information System (INIS)

    Sheppard, S.C.; Long, J.M.; Sanipelli, B.

    2010-01-01

    Recent reviews have established benchmark values for transfer factors that describe radionuclide transfer from plants to animal food product such as milk, eggs and meat. They also illustrate the paucity of data for some elements and some food products. The present study quantified transfer data using indigenous elements measured in dairy, poultry and other livestock farms in Canada. Up to 62 elements are reported, with particular emphasis on iodine (I) because of the need to accurately assess the behaviour of 129 I from disposal of nuclear fuel waste. There was remarkable agreement with the literature values, and for many elements the present study involved many more observations than were previously available. Perhaps the most important observation was that product/substrate concentration ratios (CR) were quite consistent across species, whereas the traditional fractional transfer factors (TF, units of d kg -1 or d L -1 ) necessarily vary with body mass (feed intake). This suggests that for long-term assessments, it may be advisable to change the models to use CR rather than TF.

  14. Boosting biomethane yield and production rate with graphene: The potential of direct interspecies electron transfer in anaerobic digestion.

    Science.gov (United States)

    Lin, Richen; Cheng, Jun; Zhang, Jiabei; Zhou, Junhu; Cen, Kefa; Murphy, Jerry D

    2017-09-01

    Interspecies electron transfer between bacteria and archaea plays a vital role in enhancing energy efficiency of anaerobic digestion (AD). Conductive carbon materials (i.e. graphene nanomaterial and activated charcoal) were assessed to enhance AD of ethanol (a key intermediate product after acidogenesis of algae). The addition of graphene (1.0g/L) resulted in the highest biomethane yield (695.0±9.1mL/g) and production rate (95.7±7.6mL/g/d), corresponding to an enhancement of 25.0% in biomethane yield and 19.5% in production rate. The ethanol degradation constant was accordingly improved by 29.1% in the presence of graphene. Microbial analyses revealed that electrogenic bacteria of Geobacter and Pseudomonas along with archaea Methanobacterium and Methanospirillum might participate in direct interspecies electron transfer (DIET). Theoretical calculations provided evidence that graphene-based DIET can sustained a much higher electron transfer flux than conventional hydrogen transfer. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Verification of radionuclide transfer factors to domestic-animal food products, using indigenous elements and with emphasis on iodine.

    Science.gov (United States)

    Sheppard, S C; Long, J M; Sanipelli, B

    2010-11-01

    Recent reviews have established benchmark values for transfer factors that describe radionuclide transfer from plants to animal food product such as milk, eggs and meat. They also illustrate the paucity of data for some elements and some food products. The present study quantified transfer data using indigenous elements measured in dairy, poultry and other livestock farms in Canada. Up to 62 elements are reported, with particular emphasis on iodine (I) because of the need to accurately assess the behaviour of (129)I from disposal of nuclear fuel waste. There was remarkable agreement with the literature values, and for many elements the present study involved many more observations than were previously available. Perhaps the most important observation was that product/substrate concentration ratios (CR) were quite consistent across species, whereas the traditional fractional transfer factors (TF, units of d kg(-1) or d L(-1)) necessarily vary with body mass (feed intake). This suggests that for long-term assessments, it may be advisable to change the models to use CR rather than TF.

  16. Adopted children in their adoptive families.

    Science.gov (United States)

    Schechter, M D; Holter, F R

    1975-08-01

    The adoptive process can produce unusual stresses on the child, and biologic and adoptive parents, from prenatal to postnatal life, and through the various phases of physical and pscyhological development. Because of the possibility of these children and their families falling into the "at risk" category with greater potential for psychological and social problems, the pediatrician is of primary importance in diagnosis and counseling. The pediatrician can be of major help in properly diagnosing emotional, behavioral and/or learning problems occurring in adopted children. There must be a thorough evaluation of the child and his family to understand and properly treat symptomatic behavior. The pediatrician can give advice regarding developmental milestones, and especially help the adoptive parents in appreciating their conscious and unconscious attitudes so as to enhance attachment behaviors. Pediatricians are the consultants to whom parents turn for advice regarding the timing of telling about adoption. This advice needs to be individualized according to the specific child's needs. Using a developmental conceptual framework, the pediatrician is in the best position to help the parents and their adopted children with their feelings about societal attitudes and how these can most appropriately be handled. Along this line, the pediatrician can give help and advice when and if the adoptee decides to search for his biologic parents. There is a need to clarify laws which seal the original birth certificate permitting those adoptees who wish to attain a knowledge of potentially related disease processes and an identity with his own genealogical past to do so. This would also allow the adoptee to offer his own children information about their own genetic pool and an awareness of adoption as one of the most valuable and historically significant child rearing practices.

  17. Uma investigação sobre a relação entre o projeto do produto e produção em uma montadora automotiva e fornecedores de motores que adotam a modularidade An investigation of product design and production in an automotive assembler and engine suppliers that adopt modularity

    Directory of Open Access Journals (Sweden)

    Edilson Alves Rodrigues

    2012-08-01

    Full Text Available A modularidade pode ser entendida como um conjunto de conceitos que leva a novas possibilidades de arquitetura de produto, bem como novas maneiras de organização da produção, possibilitando a transferência de atividades ao longo da cadeia de suprimentos automotiva. Nesse contexto, o objetivo deste trabalho é investigar o emprego da modularidade no projeto de produto e na produção, considerando uma situação de relação específica entre uma montadora de veículos comerciais e fornecedores de motores, no âmbito do consórcio modular. É também analisada a relação entre a modularidade no projeto de produto e na produção. Para a consecução desses objetivos é adotada a abordagem metodológica de estudo de caso. Os resultados apresentam algumas influências que ocorrem entre o projeto do produto e a produção e vice-versa, uma parte delas esperadas, reforçando o caráter confirmatório dos dados coletados. Constata-se que o conceito de modularidade pode ser aplicado ao processo produtivo sem necessariamente que o produto tenha sido concebido em módulos, ou seja, a partir de um produto existente é possível montar seus componentes formando subconjuntos em uma lógica modular. Os dados confirmam ainda que a estrutura do produto de um veículo comercial favorece a sua divisão em módulos. Adicionalmente, a gestão da cadeia de suprimentos na montadora é simplificada em comparação ao sistema de produção convencional, pois parte das responsabilidades da montadora é transferida para os fornecedores.Modularity can be understood as a set of concepts that leads to new product architecture and production organization. This enables the transference of value-added activities throughout the automotive supply chain. In this context, the aim of this paper is to investigate modularity adoption in product design and in production by considering a specific situation of the relationship between a commercial vehicle assembler and engine

  18. Evaluation of a novel dog adoption program in two US communities.

    Directory of Open Access Journals (Sweden)

    Heather Mohan-Gibbons

    Full Text Available Millions of dogs enter animal welfare organizations every year and only a fraction of them are adopted. Despite the most recent American Pet Products Association (APPA data that nearly half the US population owns a dog, only 20% acquired their dog from an animal welfare organization. Studies show that people consider adopting from an animal shelter more often than they actually do, which indicates a potential market increase if programs can make shelter dogs more visible to adopters. This research focused on a novel adoption program where shelter dogs were transferred into foster homes who were tasked with finding an adopter. Shelter dogs were placed in the path of potential adopters and bypassed the need for the adopter to go to the shelter. The results show that this novel program was effective in a variety of ways including getting dogs adopted. Although length of stay was significantly longer for dogs in the program, the dogs were in a home environment, not taking up kennel space in the shelter. The program also had a lower rate of returns than dogs adopted at the shelter. The foster program tapped adopters in different geographical segments of the community than the dogs adopted from the shelter. By bringing shelter dogs to where adopters spend their time (ex: restaurants, parks, hair salons, the program potentially captured a segment of the population who might have obtained their dog from other sources besides the shelter (such as breeders or pet stores. This novel approach can be an effective method for adoption, has many benefits for shelters, and can tap into a new adopter market by engaging their community in a new way.

  19. Evaluation of a Novel Dog Adoption Program in Two US Communities

    Science.gov (United States)

    Mohan-Gibbons, Heather; Weiss, Emily; Garrison, Laurie; Allison, Meg

    2014-01-01

    Millions of dogs enter animal welfare organizations every year and only a fraction of them are adopted. Despite the most recent American Pet Products Association (APPA) data that nearly half the US population owns a dog, only 20% acquired their dog from an animal welfare organization. Studies show that people consider adopting from an animal shelter more often than they actually do, which indicates a potential market increase if programs can make shelter dogs more visible to adopters. This research focused on a novel adoption program where shelter dogs were transferred into foster homes who were tasked with finding an adopter. Shelter dogs were placed in the path of potential adopters and bypassed the need for the adopter to go to the shelter. The results show that this novel program was effective in a variety of ways including getting dogs adopted. Although length of stay was significantly longer for dogs in the program, the dogs were in a home environment, not taking up kennel space in the shelter. The program also had a lower rate of returns than dogs adopted at the shelter. The foster program tapped adopters in different geographical segments of the community than the dogs adopted from the shelter. By bringing shelter dogs to where adopters spend their time (ex: restaurants, parks, hair salons), the program potentially captured a segment of the population who might have obtained their dog from other sources besides the shelter (such as breeders or pet stores). This novel approach can be an effective method for adoption, has many benefits for shelters, and can tap into a new adopter market by engaging their community in a new way. PMID:24663804

  20. Evaluation of a novel dog adoption program in two US communities.

    Science.gov (United States)

    Mohan-Gibbons, Heather; Weiss, Emily; Garrison, Laurie; Allison, Meg

    2014-01-01

    Millions of dogs enter animal welfare organizations every year and only a fraction of them are adopted. Despite the most recent American Pet Products Association (APPA) data that nearly half the US population owns a dog, only 20% acquired their dog from an animal welfare organization. Studies show that people consider adopting from an animal shelter more often than they actually do, which indicates a potential market increase if programs can make shelter dogs more visible to adopters. This research focused on a novel adoption program where shelter dogs were transferred into foster homes who were tasked with finding an adopter. Shelter dogs were placed in the path of potential adopters and bypassed the need for the adopter to go to the shelter. The results show that this novel program was effective in a variety of ways including getting dogs adopted. Although length of stay was significantly longer for dogs in the program, the dogs were in a home environment, not taking up kennel space in the shelter. The program also had a lower rate of returns than dogs adopted at the shelter. The foster program tapped adopters in different geographical segments of the community than the dogs adopted from the shelter. By bringing shelter dogs to where adopters spend their time (ex: restaurants, parks, hair salons), the program potentially captured a segment of the population who might have obtained their dog from other sources besides the shelter (such as breeders or pet stores). This novel approach can be an effective method for adoption, has many benefits for shelters, and can tap into a new adopter market by engaging their community in a new way.

  1. Subsides for optimization of transfer of radioactive liquid waste from 99MO production plant to the waste treatment facility

    International Nuclear Information System (INIS)

    Rego, Maria Eugenia de Melo; Vicente, Roberto; Hiromoto, Goro

    2013-01-01

    The increasing need for radioisotopes lead Brazil to consider the domestic production of 99 Mo from fission of low enriched uranium targets. In order to meet the present demand of 99m Tc generators the planned 'end of irradiation' activity of 99 Mo is about 170 TBq per week. The radioactive waste from the production plant will be transferred to a waste treatment facility at the same site. The total activity of the actinides, fission and activation products present in the waste were predicted based on the fission yield and activation data for the irradiation conditions, such as composition and mass of uranium targets, irradiation time, neutron flux, production process and schedule, already established by the project management. The transfer of the waste from the production plant to the treatment facility will be done by means of special shielded packages. In the present study, the commercially available code Scale 6.0 was used to simulate the irradiation of the targets and the decay of radioactive products, assuming that an alkaline dissolution process would be performed on the targets before the removal and purification of 99 Mo. The assessment of the shielding required for the packages containing liquid waste was done using MicroShield 9 code. The results presented here are part of a project that aims at contributing to the design of the waste management system for the 99 Mo production facility. (author)

  2. Subsides for optimization of transfer of radioactive liquid waste from {sup 99}MO production plant to the waste treatment facility

    Energy Technology Data Exchange (ETDEWEB)

    Rego, Maria Eugenia de Melo; Vicente, Roberto; Hiromoto, Goro, E-mail: maria.eugenia@ipen.br, E-mail: rvicente@ipen.br, E-mail: hiromoto@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    The increasing need for radioisotopes lead Brazil to consider the domestic production of {sup 99}Mo from fission of low enriched uranium targets. In order to meet the present demand of {sup 99m}Tc generators the planned 'end of irradiation' activity of {sup 99}Mo is about 170 TBq per week. The radioactive waste from the production plant will be transferred to a waste treatment facility at the same site. The total activity of the actinides, fission and activation products present in the waste were predicted based on the fission yield and activation data for the irradiation conditions, such as composition and mass of uranium targets, irradiation time, neutron flux, production process and schedule, already established by the project management. The transfer of the waste from the production plant to the treatment facility will be done by means of special shielded packages. In the present study, the commercially available code Scale 6.0 was used to simulate the irradiation of the targets and the decay of radioactive products, assuming that an alkaline dissolution process would be performed on the targets before the removal and purification of {sup 99}Mo. The assessment of the shielding required for the packages containing liquid waste was done using MicroShield 9 code. The results presented here are part of a project that aims at contributing to the design of the waste management system for the {sup 99}Mo production facility. (author)

  3. Sensitivity of secondary production and export flux to choice of trophic transfer formulation in marine ecosystem models

    Science.gov (United States)

    Anderson, Thomas R.; Hessen, Dag O.; Mitra, Aditee; Mayor, Daniel J.; Yool, Andrew

    2013-09-01

    The performance of four contemporary formulations describing trophic transfer, which have strongly contrasting assumptions as regards the way that consumer growth is calculated as a function of food C:N ratio and in the fate of non-limiting substrates, was compared in two settings: a simple steady-state ecosystem model and a 3D biogeochemical general circulation model. Considerable variation was seen in predictions for primary production, transfer to higher trophic levels and export to the ocean interior. The physiological basis of the various assumptions underpinning the chosen formulations is open to question. Assumptions include Liebig-style limitation of growth, strict homeostasis in zooplankton biomass, and whether excess C and N are released by voiding in faecal pellets or via respiration/excretion post-absorption by the gut. Deciding upon the most appropriate means of formulating trophic transfer is not straightforward because, despite advances in ecological stoichiometry, the physiological mechanisms underlying these phenomena remain incompletely understood. Nevertheless, worrying inconsistencies are evident in the way in which fundamental transfer processes are justified and parameterised in the current generation of marine ecosystem models, manifested in the resulting simulations of ocean biogeochemistry. Our work highlights the need for modellers to revisit and appraise the equations and parameter values used to describe trophic transfer in marine ecosystem models.

  4. PRODUCTIVE PROGRESS IN A GOAT PRODUCERS ASSOCIATION, "CAPRINOCULTORES UNIDOS DE GUANAJUATO AC", THROUGH A TECHNOLOGY TRANSFER SYSTEM GGAVATT (LIVESTOCK VALIDATION AND TECHNOLOGY TRANSFER GROUP (2001-2007

    Directory of Open Access Journals (Sweden)

    Jose Oliveros-Oliveros

    2009-02-01

    Full Text Available The aim of the study was to analyze the effect of technology adoption on milk goat producers in central México. The association has 13 producers, with an average age 41.5 years old, the average schooling reaches junior high school (3rd year, and  a mean of 6 dependants per family. This association has an average number of 246 female goats per herd, a total of 3447 females, and 2190 females in production control. The income in relation to investment is 36%. Technological practices implemented to date and the percentage of use are: Weighing milk (100%, Animal Nutrition consulting (71%, Estrus synchronization and reproductive management techniques (40%, Gestation Diagnosis (93%, Brucellosis control herd program (100%, Artificial kids raising in slat (46%, Disease diagnosis and management (61%, Certification of good milking practice (53%, Linear and genetics evaluation (87% Evaluation of genetic records ( 61%, Forage  conservation by silage (93%, Milk components analysis (100%, dispersion of genetic material (71%, Analysis and data processing for replacement selection and animal sale (Sire and females(100%, Bacteriological analysis of milk (93%, Cryoscopic point of milk (100%, and Diagnosis of subclinical mastitis (cytometryc flow (100%. An 80% of the producers have adopted different practices, and the association has promoted and implemented different programs such as: control milk production, milk quality, genealogical records, disease control, marketing in group, sales of fluid milk and dehydration of milk for conservation and sale. Accordingly to such practices, results are as follows: 11,180 kids born, from which 52% were females and 48% males, with 56.9%, 24.3%, 15.7% and 2.9% of double, triple, simple and quadruple births, respectively. The mean birth weight was 3.32 kg and 15.7 kg weaning at 60 days, with a daily gain weight (DGW of 206.33 g. For milk production, 3534 lactations were analyzed from 1999 to 2007 in a 90.4% of animals

  5. Enhancing mass transfer and ethanol production in syngas fermentation of Clostridium carboxidivorans P7 through a monolithic biofilm reactor

    International Nuclear Information System (INIS)

    Shen, Yanwen; Brown, Robert; Wen, Zhiyou

    2014-01-01

    Highlights: • Syngas fermentation process is limited by gas-to-liquid mass transfer. • A novel monolithic biofilm reactor (MBR) for efficient mass transfer was developed. • MBR with slug flow resulted in higher k L a than bubble column reactor (BCR). • MBR enhanced ethanol productivity by 53% compared to BCR. • MBR was demonstrated as a promising reactor configuration for syngas fermentation. - Abstract: Syngas fermentation is a promising process for producing fuels and chemicals from lignocellulosic biomass. Currently syngas fermentation faces several engineering challenges, with gas-to-liquid mass transfer limitation representing the major bottleneck. The aim of this work is to evaluate the performance of a monolithic biofilm reactor (MBR) as a novel reactor configuration for syngas fermentation. The volumetric mass transfer coefficient (k L a) of the MBR was evaluated in abiotic conditions within a wide range of gas flow rates (i.e., gas velocity in monolithic channels) and liquid flow rates (i.e., liquid velocity in the channels). The k L a values of the MBR were higher than those of a controlled bubble column reactor (BCR) in certain conditions, due to the slug flow pattern in the monolithic channels. A continuous syngas fermentation using Clostridium carboxidivorans P7 was conducted in the MBR system under varying operational conditions, with the variables including syngas flow rate, liquid recirculation between the monolithic column and reservoir, and dilution rate. It was found that the syngas fermentation performance – measured by such parameters as syngas utilization efficiency, ethanol concentration and productivity, and ratio of ethanol to acetic acid – depended not only on the mass transfer efficiency but also on the biofouling or abrading of the biofilm attached on the monolithic channel wall. At a condition of 300 mL/min of syngas flow rate, 500 mL/min of liquid flow rate, and 0.48 day −1 of dilution rate, the MBR produced much higher

  6. Adopting Sustainability in the Organization

    DEFF Research Database (Denmark)

    Frandsen, Sanne; Morsing, Mette; Vallentin, Steen

    2013-01-01

    Purpose – The purpose of this paper is to explore the relationship between sustainability adoption and internal legitimacy construction. Design/methodology/approach – The paper is designed as a critical inquiry into existing research and practice on sustainability adoption, illustrated by two...... corporate vignettes. Findings – Prior studies tend to assume that awareness raising is a sufficient means to create employee commitment and support for corporate sustainability programs, while empirical observations indicate that managerial disregard of conflicting interpretations of sustainability may...... result in the illegitimacy of such programs. Originality/value – The authors suggest that a loosely coupled approach to sustainability adoption is a productive way to understand internal legitimacy construction, as it appreciates complexity and polyphony....

  7. Quality or quantity: is nutrient transfer driven more by symbiont identity and productivity than by symbiont abundance?

    Science.gov (United States)

    Freeman, Christopher J; Thacker, Robert W; Baker, David M; Fogel, Marilyn L

    2013-06-01

    By forming symbiotic interactions with microbes, many animals and plants gain access to the products of novel metabolic pathways. We investigated the transfer of symbiont-derived carbon and nitrogen to the sponges Aplysina cauliformis, Aplysina fulva, Chondrilla caribensis, Neopetrosia subtriangularis and Xestospongia bocatorensis, all of which host abundant microbial populations, and Niphates erecta, which hosts a sparse symbiont community. We incubated sponges in light and dark bottles containing seawater spiked with (13)C- and (15)N-enriched inorganic compounds and then measured (13)C and (15)N enrichment in the microbial (nutrient assimilation) and sponge (nutrient transfer) fractions. Surprisingly, although most sponges hosting abundant microbial communities were more enriched in (13)C than N. erecta, only N. subtriangularis was more enriched in (15)N than N. erecta. Although photosymbiont abundance varied substantially across species, (13)C and (15)N enrichment was not significantly correlated with photosymbiont abundance. Enrichment was significantly correlated with the ratio of gross productivity to respiration (P:R), which varied across host species and symbiont phylotype. Because irradiance impacts P:R ratios, we also incubated A. cauliformis in (13)C-enriched seawater under different irradiances to determine whether symbiont carbon fixation and transfer are dependent on irradiance. Carbon fixation and transfer to the sponge host occurred in all treatments, but was greatest at higher irradiances and was significantly correlated with P:R ratios. Taken together, these results demonstrate that nutrient transfer from microbial symbionts to host sponges is influenced more by host-symbiont identities and P:R ratios than by symbiont abundance.

  8. Mathematical modeling of heat transfer in production premises heated by gas infrared emitters

    Directory of Open Access Journals (Sweden)

    Maksimov Vyacheslav I.

    2017-01-01

    Full Text Available The results of numerical modeling of the process of free convective heat transfer in the regime of turbulent convection in a closed rectangular region heated by an infrared radiator are presented. The system of Navier-Stokes equations in the Boussinesq approximation is solved, the energy equation for the gas and the heat conduction equations for the enclosing vertical and horizontal walls. A comparative analysis of the heat transfer regimes in the considered region for different Grashof numbers is carried out. The features of the formation of heated air flows relative to the infrared emitter located at some distance from the upper horizontal boundary of the region are singled out.

  9. Elaboration of the international transfer mechanism of reduction in greenhouse gas emissions on the basis of the Russian federal law About agreements of products sharing'

    International Nuclear Information System (INIS)

    Toivonen, N.R.; Koulikovskaya, L.

    2001-01-01

    Suggestions for a comprehensive legal framework for the implementation in Russia of the flexibility mechanisms established under the Kyoto Protocol (i.e. joint implementation; clean development mechanism; international emissions trading) are proposed. It is suggested that the legal framework be established using the principles embodied in the existing Russian federal law, 'About agreements of product sharing' adopted in 1995. As a basic requirement, it is suggested that the new federal law must include the fundamental elements required to create possibilities for the Russian Federation to participate in the process of certified emission reductions (CER) transfer, emissions reduction unit (ERU) negotiation, and adjusted amount units (AAU) trading within the framework of the Kyoto Protocol implementation. The new law must also embody the basic procedures required to enter into agreements at the international, inter-regional and inter-sectoral levels. Failure to develop the legislative support and the legal framework to facilitate valid Russian participation in the implementation of the Kyoto Protocol will prevent many valuable initiatives and projects from being realized

  10. Effects of packaging and heat transfer kinetics on drug-product stability during storage under uncontrolled temperature conditions.

    Science.gov (United States)

    Nakamura, Toru; Yamaji, Takayuki; Takayama, Kozo

    2013-05-01

    To predict the stability of pharmaceutical preparations under uncontrolled temperature conditions accurately, a method to compute the average reaction rate constant taking into account the heat transfer from the atmosphere to the product was developed. The average reaction rate constants computed with taken into consideration heat transfer (κ(re) ) were then compared with those computed without taking heat transfer into consideration (κ(in) ). The apparent thermal diffusivity (κ(a) ) exerted some influence on the average reaction rate constant ratio (R, R = κ(re) /κ(in) ). In the regions where the κ(a) was large (above 1 h(-1) ) or very small, the value of R was close to 1. On the contrary, in the middle region (0.001-1 h(-1) ), the value of R was less than 1.The κ(a) of the central part of a large-size container and that of the central part of a paper case of 10 bottles of liquid medicine (100 mL) fell within this middle region. On the basis of the above-mentioned considerations, heat transfer may need to be taken into consideration to enable a more accurate prediction of the stability of actual pharmaceutical preparations under nonisothermal atmospheres. Copyright © 2013 Wiley Periodicals, Inc.

  11. Sandwiched confinement of quantum dots in graphene matrix for efficient electron transfer and photocurrent production

    DEFF Research Database (Denmark)

    Zhu, Nan; Zheng, Kaibo; J. Karki, Khadga

    2015-01-01

    matrix via interfacial self-assembly, leading to the formation of sandwiched hybrid QD-graphene nanofilms. We have explored structural features, electron transfer kinetics and photocurrent generation capacity of such hybrid nanofilms using a wide variety of advanced techniques. Graphene nanosheets...

  12. Knowledge Transfer in Product Development: an Analysis of Brazilian Subsidiaries of Multinational Corporations

    Directory of Open Access Journals (Sweden)

    Dusan Schreiber

    2011-07-01

    Full Text Available Several studies about knowledge transfer in multinational corporations have found that the process is influenced by factors such as absorptive capacity, tacit knowledge and power relations, all of which impact knowledge sharing strategies between corporate headquarters and foreign subsidiaries. A multiple case study of Brazilian subsidiaries of three multinational corporations using in-depth interviews, based on a conceptual model consisting of four propositions, was conducted to identify factors linked to the knowledge transfer process and to assess their influence on that transfer. The first proposition tries to assess explicit knowledge, primarily through the use of IT tools; the second analyzes the role of the subsidiary within the corporate network and how it influences the degree of knowledge sharing. The third assesses the influence of subsidiary absorptive capacity and the fourth analyzes the impact of worker exchange programs on knowledge sharing between headquarters and foreign subsidiaries. Study results confirm the four propositions and enable the identification of relationships between factors, especially explicit knowledge and worker expatriation as complementary factors in knowledge transfer strategies.

  13. Consequences of the release of chemical pollutants on the transfers of radiioactive products in aquatic systems

    International Nuclear Information System (INIS)

    Bittel, R.

    1975-01-01

    With the increasing rate of industrial activities, aquatic systems undergo, more and more frequently, the accumulation of chemical and radioactive wastes released separatly or associated in the same discharge. An attempt is made to evaluate the consequence of the association of pollutants on the transfers of neutron activation radionuclides. Emphasis is given to heavy metal pollution and complexing agents [fr

  14. Reduction of radiocesium transfer to animal products using sustained release boli with ammoniumiron(3)-Hexacyanoferrate(2)

    International Nuclear Information System (INIS)

    Hove, K.; Hansen, H.S.

    1993-01-01

    A sustained release boulus with the cesium binder ammoniumiron(III) - hexacyanoferrate (AFCF) has been developed as a countermeasure for small ruminants grazing pastures contaminated by radiocesium ( 134 Cs+ 137 Cs). The boli (40-50 g) are produced by compression of a mixture of AFCF, barite and wax. The release of AFCF from boli labelled with 137Cs-iron-hexacyanoferrate complex was studied in laboratory sheep. The release rate followed first order kinetics during the 108 d of observation and decreased from 40 to 22, 110 to 35 and 280 to 25 mg d -1 in sheep treated with 1, 2 or 3 boli respectively. The efficiency of boli in reducing radiocesium transfer to meat and milk was tested in laboratory studies with goats fed 134 Cs tracer. Until 40 d after treatment the transfer of radiocesium to milk was reduced by 35%, 60% and 85% in goats given 1, 2 og 3 boli, respectively. The reduction in radiocaesium transfer persisted for 90 d but with a lower efficiency. A similar relationship was found between number of boli and the reduction in radiocesium transfer to meat with an observed maximal reduction of 60%. (au) (20 refs.)

  15. Reduction of radiocesium transfer to animal products using sustained release boli with ammoniumiron(3)-Hexacyanoferrate(2)

    Energy Technology Data Exchange (ETDEWEB)

    Hove, K; Hansen, H S [Department of Animal Science, Agricultural University of Norway, Aas (Norway)

    1993-01-01

    A sustained release boulus with the cesium binder ammoniumiron(III) - hexacyanoferrate (AFCF) has been developed as a countermeasure for small ruminants grazing pastures contaminated by radiocesium ([sup 134]Cs+[sup 137]Cs). The boli (40-50 g) are produced by compression of a mixture of AFCF, barite and wax. The release of AFCF from boli labelled with 137Cs-iron-hexacyanoferrate complex was studied in laboratory sheep. The release rate followed first order kinetics during the 108 d of observation and decreased from 40 to 22, 110 to 35 and 280 to 25 mg d[sup -1] in sheep treated with 1, 2 or 3 boli respectively. The efficiency of boli in reducing radiocesium transfer to meat and milk was tested in laboratory studies with goats fed [sup 134]Cs tracer. Until 40 d after treatment the transfer of radiocesium to milk was reduced by 35%, 60% and 85% in goats given 1, 2 og 3 boli, respectively. The reduction in radiocaesium transfer persisted for 90 d but with a lower efficiency. A similar relationship was found between number of boli and the reduction in radiocesium transfer to meat with an observed maximal reduction of 60%. (au) (20 refs.).

  16. Heat transfer and the continuous production of hydroxypropyl starch in a static mixer reactor

    NARCIS (Netherlands)

    Lammers, Gerard; Beenackers, Antonie A. C. M.

    1994-01-01

    A novel continuous reactor for the chemical derivation of aqueous starch solutions based on static mixers is proposed. Both the experimentally observed axial and radial temperature gradients in the static mixer could be accurately described by a pseudohomogeneous two-dimensional heat transfer (PTHT)

  17. Systems of innovation and agricultural productivity in African ...

    African Journals Online (AJOL)

    Journal of Agricultural Research and Development ... dominated by the narrow approach of employing technology transfer and adoption theory. ... are relevant in studying innovative practices that result in sustainable agricultural productivity.

  18. The Danish Adoption Register

    DEFF Research Database (Denmark)

    Petersen, Liselotte; Sørensen, Thorkild I A

    2011-01-01

    The Danish Adoption Register was established in 1963-1964 to explore the genetic and environmental contribution to familial aggregation of schizophrenia.......The Danish Adoption Register was established in 1963-1964 to explore the genetic and environmental contribution to familial aggregation of schizophrenia....

  19. Becoming an Adoptive Parent

    DEFF Research Database (Denmark)

    McIlvenny, Paul; Raudaskoski, Pirkko Liisa

    Our research approaches transnational adoption as a nexus of local and global practices which are mediated in talk, text and other modalities of discourse. We use mediated discourse analysis combined with virtual ethnography to understand the cross-cultural similarities and differences in transna......Our research approaches transnational adoption as a nexus of local and global practices which are mediated in talk, text and other modalities of discourse. We use mediated discourse analysis combined with virtual ethnography to understand the cross-cultural similarities and differences...... in transnational adoption practice and representation. We present the results of our analysis of how the experiences of adoptive parents are (re)mediated in a Danish television documentary series following five prospective adoptive couples, not all of whom succeed in their 'quest' to adopt from abroad. Furthermore......, we trace how adopters publicly narrate their own experiences and problems with fertility and with adoption, as well as how they construct their personal websites, network with others locally and internationally, orient to other ‘sites’ or sources of information, share advice and create 'public goods...

  20. Production of lexical stress in non-native speakers of American English: kinematic correlates of stress and transfer.

    Science.gov (United States)

    Chakraborty, Rahul; Goffman, Lisa

    2011-06-01

    To assess the influence of second language (L2) proficiency on production characteristics of rhythmic sequences in the L1 (Bengali) and L2 (English), with emphasis on linguistic transfer. One goal was to examine, using kinematic evidence, how L2 proficiency influences the production of iambic and trochaic words, focusing on temporal and spatial aspects of prosody. A second goal was to assess whether prosodic structure influences judgment of foreign accent. Twenty Bengali-English bilingual individuals, 10 with low proficiency in English and 10 with high proficiency in English, and 10 monolingual English speakers, participated. Lip and jaw movements were recorded while the bilingual participants produced Bengali and English words embedded in sentences. Lower lip movement amplitude and duration were measured in trochaic and iambic words. Six native English listeners judged the nativeness of the bilingual speakers. Evidence of L1-L2 transfer was observed through duration but not amplitude cues. More proficient L2 speakers varied duration to mark iambic stress. Perceptually, the high-proficiency group received relatively higher native-like accent ratings. Trochees were judged as more native than iambs. Even in the face of L1-L2 lexical stress transfer, nonnative speakers demonstrated knowledge of prosodic contrasts. Movement duration appears to be more amenable than amplitude to modifications.

  1. In Vivo Production of Monoclonal Antibodies by Gene Transfer via Electroporation Protects against Lethal Influenza and Ebola Infections

    Directory of Open Access Journals (Sweden)

    Chasity D. Andrews

    2017-12-01

    Full Text Available Monoclonal antibodies (mAbs have wide clinical utility, but global access is limited by high costs and impracticalities associated with repeated passive administration. Here, we describe an optimized electroporation-based DNA gene transfer platform technology that can be utilized for production of functional mAbs in vivo, with the potential to reduce costs and administration burdens. We demonstrate that multiple mAbs can be simultaneously expressed at protective concentrations for a protracted period of time using DNA doses and electroporation conditions that are feasible clinically. The expressed mAbs could also protect mice against lethal influenza or Ebola virus challenges. Our findings suggest that this DNA gene transfer platform technology could be a game-changing advance that expands access to effective mAb therapeutics globally.

  2. Production of neutron-rich nuclides in the vicinity of N = 126 shell closure in multinucleon transfer reactions

    Directory of Open Access Journals (Sweden)

    Karpov Alexander

    2017-01-01

    Full Text Available Multinucleon transfer in low-energy nucleus-nucleus collisions is widely discussed as a method of production of yet-unknown neutron-rich nuclei hardly accessible (or inaccessible by other methods. Modeling of complicated dynamics of nuclear reactions induced by heavy ions is done within a multidimensional dynamical model of nucleus-nucleus collisions based on the Langevin equations. The model gives a continuous description of the system evolution starting from the well-separated target and projectile in the entrance channel of the reaction up to the formation of final reaction products. In this paper, rather recent sets of experimental data for the 136Xe+198Pt,208Pb reactions are analyzed together with the production cross sections for neutron-rich nuclei in the vicinity of the N = 126 magic shell.

  3. Spin Transfer in Inclusive Λ0 Production by Transversely Polarized Protons at 200GeV/c

    International Nuclear Information System (INIS)

    Grosnick, D.P.; Hill, D.A.; Laghai, M.; Lopiano, D.; Ohashi, Y.; Spinka, H.; Stanek, R.W.; Underwood, D.G.; Yokosawa, A.; Bystricky, J.; Lehar, F.; Lesquen, A. de; Rossum, L. van; Cossairt, J.D.; Read, A.L.; Iwatani, K.; Belikov, N.I.; Derevschikov, A.A.; Grachov, O.A.; Matulenko, Y.A.; Meschanin, A.P.; Nurushev, S.B.; Patalakha, D.I.; Rykov, V.L.; Solovyanov, V.L.; Vasiliev, A.N.; Akchurin, N.; Onel, Y.; Maki, T.; Enyo, H.; Funahashi, H.; Goto, Y.; Iijima, T.; Imai, K.; Itow, Y.; Makino, S.; Masaike, A.; Miyake, K.; Nagamine, T.; Saito, N.; Yamashita, S.; Takashima, R.; Takeutchi, F.; Kuroda, K.; Michalowicz, A.; Rappazzo, G.F.; Salvato, G.; Luehring, F.C.; Miller, D.H.; Tamura, N.; Yoshida, T.; Adams, D.L.; Bonner, B.E.; Corcoran, M.D.; Cranshaw, J.; Nessi-Tedaldi, F.; Nessi, M.; Nguyen, C.; Roberts, J.B.; Skeens, J.; White, J.L.; Bravar, A.

    1997-01-01

    Surprisingly large polarizations in hyperon production by unpolarized protons have been known for a long time. The spin dynamics of the production process can be further investigated with polarized beams. Recently, a negative asymmetry A N was found in inclusive Λ 0 production with a 200GeV/c transversely polarized proton beam. The depolarization D NN in p↑+p→Λ 0 +X has been measured with the same beam over a wide x F range and at moderate p T . D NN reaches positive values of about 30% at high x F and p T ∼1.0GeV/c . This result shows a sizable spin transfer from the incident polarized proton to the outgoing Λ 0 . copyright 1997 The American Physical Society

  4. Numerical model describing the heat transfer between combustion products and ventilation-system duct walls

    International Nuclear Information System (INIS)

    Bolstad, J.W.; Foster, R.D.; Gregory, W.S.

    1983-01-01

    A package of physical models simulating the heat transfer processes occurring between combustion gases and ducts in ventilation systems is described. The purpose of the numerical model is to predict how the combustion gas in a system heats up or cools down as it flows through the ducts in a ventilation system under fire conditions. The model treats a duct with (forced convection) combustion gases flowing on the inside and stagnant ambient air on the outside. The model is composed of five submodels of heat transfer processes along with a numerical solution procedure to evaluate them. Each of these quantities is evaluated independently using standard correlations based on experimental data. The details of the physical assumptions, simplifications, and ranges of applicability of the correlations are described. A typical application of this model to a full-scale fire test is discussed, and model predictions are compared with selected experimental data

  5. Transfer and Reuse of Knowledge from the Service Phase of Complex Products

    DEFF Research Database (Denmark)

    Vianello, Giovanna

    industry. Knowledge generated during the service phase was analysed from the point of view of service engineers and engineering designers. Furthermore, the mechanisms involved in the transfer of knowledge within the service phase and between service and design were investigated. Both service engineers....... The study showed that knowledge transfer between the service and design departments was not systematic and consisted primarily of knowledge pushed by service engineers to engineering designers. The issues that posed a barrier to a systematic reuse of service knowledge were taken into consideration whilst...... and engineering designers were interested in knowledge about changes, issues and improvements generated during service; however, engineering designers were more orientated towards knowledge of the equipment at a component level while service engineers were interested in obtaining an overview of the systems...

  6. The Adoption Process: Knowing the Experience of Adopting Families.

    Directory of Open Access Journals (Sweden)

    Ana Carolina Gravena Vanalli

    2015-01-01

    Full Text Available Adoption includes changes to both the child and the adoptive home. Seeking to know the experiences regarding adoption, the couple and the family's experiences, two adoptive mothers were interviewed. The results indicate that the integration of the adopted child was carried out in a positive way, filling an apparent empty spot, and the adopted child was considered responsible for family harmony.

  7. Production of human CD59-transgenic pigs by embryonic germ cell nuclear transfer

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Kwang Sung; Won, Ji Young [Department of Physiology, Dankook University School of Medicine, Cheonan (Korea, Republic of); Park, Jin-Ki [Animal Biotechnology Division, National Institute of Animal Science, Suwon (Korea, Republic of); Sorrell, Alice M. [Department of Physiology, Dankook University School of Medicine, Cheonan (Korea, Republic of); Heo, Soon Young; Kang, Jee Hyun [Department of Nanobiomedical Science, Dankook University, Cheonan (Korea, Republic of); Woo, Jae-Seok [Animal Biotechnology Division, National Institute of Animal Science, Suwon (Korea, Republic of); Choi, Bong-Hwan [Genomics and Bioinformatics Division, National Institute of Animal Science, Suwon (Korea, Republic of); Chang, Won-Kyong [Animal Biotechnology Division, National Institute of Animal Science, Suwon (Korea, Republic of); Shim, Hosup, E-mail: shim@dku.edu [Department of Nanobiomedical Science, Dankook University, Cheonan (Korea, Republic of); Institute of Tissue Regeneration Engineering, Dankook University, Cheonan (Korea, Republic of)

    2010-10-01

    Research highlights: {yields} Human CD59 (hCD59) gene was introduced into porcine embryonic germ (EG) cells. {yields} hCD59-transgenic EG cells were resistant to hyperacute rejection in cytolytic assay. {yields} hCD59-transgenic pigs were produced by EG cell nuclear transfer. -- Abstract: This study was performed to produce transgenic pigs expressing the human complement regulatory protein CD59 (hCD59) using the nuclear transfer (NT) of embryonic germ (EG) cells, which are undifferentiated stem cells derived from primordial germ cells. Because EG cells can be cultured indefinitely in an undifferentiated state, they may provide an inexhaustible source of nuclear donor cells for NT to produce transgenic pigs. A total of 1980 NT embryos derived from hCD59-transgenic EG cells were transferred to ten recipients, resulting in the birth of fifteen piglets from three pregnancies. Among these offspring, ten were alive without overt health problems. Based on PCR analysis, all fifteen piglets were confirmed as hCD59 transgenic. The expression of the hCD59 transgene in the ten living piglets was verified by RT-PCR. Western analysis showed the expression of the hCD59 protein in four of the ten RT-PCR-positive piglets. These results demonstrate that hCD59-transgenic pigs could effectively be produced by EG cell NT and that such transgenic pigs may be used as organ donors in pig-to-human xenotransplantation.

  8. Production of human CD59-transgenic pigs by embryonic germ cell nuclear transfer

    International Nuclear Information System (INIS)

    Ahn, Kwang Sung; Won, Ji Young; Park, Jin-Ki; Sorrell, Alice M.; Heo, Soon Young; Kang, Jee Hyun; Woo, Jae-Seok; Choi, Bong-Hwan; Chang, Won-Kyong; Shim, Hosup

    2010-01-01

    Research highlights: → Human CD59 (hCD59) gene was introduced into porcine embryonic germ (EG) cells. → hCD59-transgenic EG cells were resistant to hyperacute rejection in cytolytic assay. → hCD59-transgenic pigs were produced by EG cell nuclear transfer. -- Abstract: This study was performed to produce transgenic pigs expressing the human complement regulatory protein CD59 (hCD59) using the nuclear transfer (NT) of embryonic germ (EG) cells, which are undifferentiated stem cells derived from primordial germ cells. Because EG cells can be cultured indefinitely in an undifferentiated state, they may provide an inexhaustible source of nuclear donor cells for NT to produce transgenic pigs. A total of 1980 NT embryos derived from hCD59-transgenic EG cells were transferred to ten recipients, resulting in the birth of fifteen piglets from three pregnancies. Among these offspring, ten were alive without overt health problems. Based on PCR analysis, all fifteen piglets were confirmed as hCD59 transgenic. The expression of the hCD59 transgene in the ten living piglets was verified by RT-PCR. Western analysis showed the expression of the hCD59 protein in four of the ten RT-PCR-positive piglets. These results demonstrate that hCD59-transgenic pigs could effectively be produced by EG cell NT and that such transgenic pigs may be used as organ donors in pig-to-human xenotransplantation.

  9. Economics of household technology adoption in developing countries: evidence from solar technology adoption in rural India

    OpenAIRE

    Aklin, M.; Bayer, P.; Harish, S.P.; Urpelainen, J.

    2018-01-01

    Innovation is one of the most important drivers of economic development. Even in developing countries, households have access to a wide array of new technologies. However, factors affecting households’ technology adoption decisions remain poorly understood. Using data on solar microgrid adoption from rural India, we investigate the determinants of household technology adoption. We offer all households identical solar products to avoid bias from product differentiation. Households pay a monthl...

  10. ADOPTION OF IMPROVED TECHNOLOGY IN ETHIOPIA By

    African Journals Online (AJOL)

    Etsub [ ETSUB

    forms often used are the probit (the standard cumulative distribution function) and ... are techniques for estimating the probability of an event (such as adoption) that can .... credit, availability of labour, etc., are expected to influence the adoption behaviour ..... and have the opportunity to adjust productive resources over time.

  11. Understanding factors affecting technology adoption in smallholder livestock production systems in Ethiopia : the role of farm resources and the enabling environment

    NARCIS (Netherlands)

    Kebebe, E.G.

    2015-01-01

    Abstract

    In response to population growth, rising income and urbanisation, the demand for livestock products, such as milk, meat and eggs is growing in Ethiopia. The growing demand for milk products offers opportunities for smallholders to realize better livelihoods.

  12. Toward exascale production of recombinant adeno-associated virus for gene transfer applications.

    Science.gov (United States)

    Cecchini, S; Negrete, A; Kotin, R M

    2008-06-01

    To gain acceptance as a medical treatment, adeno-associated virus (AAV) vectors require a scalable and economical production method. Recent developments indicate that recombinant AAV (rAAV) production in insect cells is compatible with current good manufacturing practice production on an industrial scale. This platform can fully support development of rAAV therapeutics from tissue culture to small animal models, to large animal models, to toxicology studies, to Phase I clinical trials and beyond. Efforts to characterize, optimize and develop insect cell-based rAAV production have culminated in successful bioreactor-scale production of rAAV, with total yields potentially capable of approaching the exa-(10(18)) scale. These advances in large-scale AAV production will allow us to address specific catastrophic, intractable human diseases such as Duchenne muscular dystrophy, for which large amounts of recombinant vector are essential for successful outcome.

  13. Methods to Improve Adoptive T-Cell Therapy for Melanoma

    DEFF Research Database (Denmark)

    Donia, Marco; Hansen, Morten; Sendrup, Sarah L

    2013-01-01

    desirable. In this study, we demonstrated that a high in vitro tumor reactivity of infusion products was associated with clinical responses upon adoptive transfer. In addition, we systematically characterized the responses of a series of TIL products to relevant autologous short term-cultured melanoma cell...... lines from 12 patients. We provide evidence that antitumor reactivity of both CD8(+) and CD4(+) T cells could be enhanced in most TIL products by autologous melanoma sensitization by pretreatment with low-dose IFN-γ. IFN-γ selectively enhanced responses to tumor-associated antigens other than melanoma...... differentiation antigens. In addition, IFN-γ treatment was invariably associated with restored/increased cancer immunogenicity as demonstrated by upregulation of major histocompatibility complex molecules. These findings suggest a potential synergism between IFN-γ and ACT, and have important implications...

  14. Adopt Your Watershed

    Data.gov (United States)

    U.S. Environmental Protection Agency — Adopt Your Watershed is a Website that encourages stewardship of the nation's water resources and serves as a national inventory of local watershed groups and...

  15. Adoption and Sibling Rivalry

    Science.gov (United States)

    ... Life Medical Home Family Dynamics Adoption & Foster Care Communication & Discipline Types of Families Media Work & Play Getting ... as deep, loving, and long-lasting as any parent-child relationship. Last Updated 11/21/2015 Source Caring ...

  16. Machine Replacement, Technology Adoption and Convergence.

    OpenAIRE

    Boucekkine, Raouf; Martinez, Blanca

    1999-01-01

    In this paper, we introduce adoption costs in a canonical vintage capital model. Adoption costs take the form of a direct loss in production during a fixed period of time. We explicitly characterize the optimal machine replacement policy as a function of the adoption period. Using an explicit numerical method, we study the dynamics of the model. In particular, we find that while an increase in the adoption costs lowers the long run level of output, it also rises the magnitude of short run flu...

  17. Towards Mass Production by High Performance Transfer Press in Micro Bulk Forming

    DEFF Research Database (Denmark)

    Mahshid, Rasoul; Hansen, Hans Nørgaard; Arentoft, Mogens

    2014-01-01

    cold bulk forming. A methodology for selection of linear motors on the bases of the process parameters was obtained. In order to examine the effectiveness of the machine, specific geometry was investigated for production. Kinematic parameters were found for a production rate of 200 strokes per minute...

  18. Deflection effects and charge transfer in inner-shell vacancy production

    International Nuclear Information System (INIS)

    Swafford, G.L.

    1978-01-01

    A method used in the calculation of inner shell ionization in asymmetric ion-atom collisions is extended to include projectile deflection effects and charge transfer to the projectile. Work is done in an independent electron model (Hartree-Fock) for the target, and the interaction is treated with the projectile as a time-dependent perturbation of the system. It is shown tht the time-dependent problem can be solved for the projectile moving along the classical hyperbolic trajectory that results from the nuclear repulsion. The method is very efficient due to the utilization the target-centered expansion of the system wave function. This means that all the required matrix elements can be pretabulated and are then available for use at all impact parameters. The method is first applied to the impact-parameter dependence of K-shell ionization by protons incident upon copper in the energy range 0.5 to 2 MeV. Excellent agreement with the experiments of Andersen et al., is found at the lower energy. Less satisfactory agreement is obtained in the higher energy region. Next the projectile is considered to move in a straight line path with constant velocity, and extend the method to include charge transfer between the target inner shells and the K-shell of the projectile. A critical feature of the results is the recognition of the importance of target continuum states of energy approximately equal to the kinetic energy (in the target frame) of the electron on the projectile. An approach is developed to properly include such resonance states in our pseudostate calculation. Selected numerical results are presented to illustrate the method and to demonstrate the projectile energy and nuclear charge dependence of the charge transfer cross sections

  19. Transfer of the high-GC cyclohexane carboxylate degradation pathway from Rhodopseudomonas palustris to Escherichia coli for production of biotin.

    Science.gov (United States)

    Bernstein, Jeffrey R; Bulter, Thomas; Liao, James C

    2008-01-01

    This work demonstrates the transfer of the five-gene cyclohexane carboxylate (CHC) degradation pathway from the high-GC alphaproteobacterium Rhodopseudomonas palustris to Escherichia coli, a gammaproteobacterium. The degradation product of this pathway is pimeloyl-CoA, a key metabolite in E. coli's biotin biosynthetic pathway. This pathway is useful for biotin overproduction in E. coli; however, the expression of GC-rich genes is troublesome in this host. When the native R. palustris CHC degradation pathway is transferred to a DeltabioH pimeloyl-CoA auxotroph of E. coli, it is unable to complement growth in the presence of CHC. To overcome this expression problem we redesigned the operon with decreased GC content and removed stretches of high-GC intergenic DNA which comprise the 5' untranslated region of each gene, replacing these features with shorter low-GC sequences. We show this synthetic construct enables growth of the DeltabioH strain in the presence of CHC. When the synthetic degradation pathway is overexpressed in conjunction with the downstream genes for biotin biosynthesis, we measured significant accumulation of biotin in the growth medium, showing that the pathway transfer is successfully integrated with the host metabolism.

  20. IMAZAPYR-RESISTANT MAIZE TECHNOLOGY ADOPTION FOR ...

    African Journals Online (AJOL)

    Prof. Adipala Ekwamu

    decisions by protecting maize (Zea mays L.) crop in western Kenya from Striga. Key Words: Adopters, Zea ... Africa, efficient and profitable production of maize is severely constrained by ..... gap by understanding its source. African. Journal of ...

  1. Investigation on analytical method for the transfer behavior of corrosion product (CP) in the fast breeder reactors

    International Nuclear Information System (INIS)

    Matsuo, Youichirou; Sasaki, Shinji

    2013-05-01

    Radioactive corrosion products (CPs) are main cause of personal radiation exposure during maintenance work without fuel failure in FBR plants. The most important CP species are 54 Mn and 60 Co. The deposited radioactive CPs cause radiation fields near the piping and components, and the CPs contribute to the radiation exposure of the plant-worker. In this review, firstly, the collected knowledge about CP transfer behavior in the fast reactor are reviewed and analyzed. Secondly, the existing analytical methods to evaluate CP transfer behavior are investigated, issues of which and their solutions are extracted and discussed. Finally, examples of the calculated results by the improved analytical method are described. The provided conclusions are as follows; (1) Collected knowledge on CP transfer behavior. CP generation is mainly due to the dissolution of CP from hot reactor core constitution materials to hot sodium. On the core materials, particle-formed structure was confirmed. The evidence of CP precipitation in the low temperature part of the primary cooling system and the lower part of reactor core was provided. Similarly, the evidence of CP particle deposition in the same domain was also provided. (2) Extracted issues on analytical methods of CP transfer and proposed solutions. In the past, radioactivity caused by CP deposition on the piping and the core materials surface is confirmed. Subsequently, analytical models were developed based on the distribution of the CPs in the reactor coolant systems and the out-pile sodium loop test. The local high radiation dosage (such as elbow part) was observed by the radiation measurement. However, this behavior cannot be evaluated by the existing model, and it is considered necessary to take into account the transfer of CP particle. (3) The recent trend of the CP behavioral analysis method. Novel CP particle generation, transfer and deposition models were developed based on existing knowledge on CP behavior. The developed

  2. NACOWA experiments on LMFBR cover gas aerosols, heat transfer, and fission product enrichment

    International Nuclear Information System (INIS)

    Minges, J.; Schuetz, W.

    1993-12-01

    Fifteen different NACOWA test series were carried out. The following items were investigated: sodium mass concentration in the cover gas, sodium aerosol particle size, radiative heat transfer across the cover gas, total heat transfer across the cover gas, sodium deposition on the cover plate, temperature profiles across the cover gas, phenomena if the argon cover gas is replaced by helium, enrichment of cesium, iodine, and zinc in the aerosol and in the deposits. The conditions were mainly related to the design parameters of the EFR. According to the first consistent design, a pool temperature of 545 C and a roof temperature of only 120 C were foreseen at a cover gas height of 85 cm. The experiments were carried out in a stainless steel test vessel of 0.6 m diameter and 1.14 m height. Pool temperature (up to 545 C), cover gas height (12.5 cm, 33 cm, and others), and roof temperature (from 110 C to 450 C) were the main parameters. (orig./HP) [de

  3. An investigation of air emission levels from distinct iron and steel production processes with the adoption of pollution control and pollution prevention alternatives

    International Nuclear Information System (INIS)

    Costa, M.M.; Schaeffer, R.

    1999-01-01

    This paper aims to investigate environmental aspects from different iron and steel production processes. A methodology based on material flows is developed in order to verify some air emission levels attained by Pollution Control and Pollution Prevention alternatives. The data basis for modeling energy and materials flows in iron and steel production is obtained from a literature review on different technological processes, energy and materials consumption and pollutant releases to the environmental Modeling combines both process analysis and input-output techniques to simulate the different iron and steel production routes and to estimate the resulting total atmospheric pollution releases based on air emission factors for several pollutants by each production step. Processes examined include: (1) Conventional Integrated (100% ore-based and partly scrap-based); (2) Mini-mill with EAF (100% scrap-based and partly DRI-based); and (3) New Integrated based on the COREX smelting reduction process. Among the alternatives considered for air emissions reductions are those related to Pollution Control (mainly gas cleaning systems) and to Pollution Prevention (change/reduction in input materials, operational procedures and housekeeping improvements, on-site recycling and technology innovations and modifications). Results indicate higher air pollution intensity for the Conventional Integrated Route over the Mini-mill with EAF and COREX smelting reduction processes, though pointing out that final figures are strongly affected by the systems' boundaries and the different air emission levels of each production step

  4. Research and development on process components for hydrogen production. (1) Test-fabrication of sulfuric acid transfer pump

    International Nuclear Information System (INIS)

    Iwatsuki, Jin; Terada, Atsuhiko; Hino, Ryutaro; Kubo, Shinji; Onuki, Kaoru; Watanabe, Yutaka

    2009-01-01

    Japan Atomic Energy Agency has been conducting a research and development on hydrogen production system using High Temperature Gas-Cooled Reactor. As a part of this effort, thermochemical water-splitting cycle featuring iodine- and sulfur-compounds (IS process) is under development considering its potential of large-scale economical hydrogen production. The IS process constitutes very severe environments to the materials of construction because of the corrosive nature of process chemicals, especially of the high temperature acidic solutions of sulfuric acid and hydriodic acid dissolving iodine. Therefore, selection of the corrosion-resistant materials and development of the components have been the crucial subjects of process development. This paper concerns the sulfuric acid transfer pump. The development has been implemented of a pump for transporting concentrated sulfuric acid at temperatures of higher than 300degC and at elevated pressure. Recent progress of these activities will be reported. (author)

  5. One-Minute Room-Temperature Transfer-Free Production of Mono- and Few-Layer Polycrystalline Graphene on Various Substrates.

    Science.gov (United States)

    Jiang, Shenglin; Zeng, Yike; Zhou, Wenli; Miao, Xiangshui; Yu, Yan

    2016-01-14

    Graphene deposited on various substrates has attracted the attention of the scientific and technical communities for use in a wide range of applications. Graphene on substrates is commonly produced by two types of methods, namely, methods that require a transfer step and transfer-free methods. Compared with methods that require a transfer step, transfer-free methods have a simpler procedure and a lower cost. Thus, transfer-free methods have considerable potential to meet the industrial and commercial demands of production methods. However, some limitations of the current transfer-free methods must be overcome, such as the high temperatures encountered during production, the relatively long manufacturing times, incompatibilities for both rigid and flexible substrates, and an inability to extend the process to other two-dimensional (2-D) atomic crystals. In this work, a room-temperature rubbing method is developed for the rapid transfer-free production of defect-free polycrystalline graphene on rigid and flexible substrates. Starting with inexpensive commercially obtained graphite powder, mono- and few-layer graphene can be fabricated directly on various substrates, with an average production time of less than one minute (from raw graphite to graphene on the substrate). Importantly, this method can be extended to other 2-D atomic crystals.

  6. 2D heat and mass transfer modeling of methane steam reforming for hydrogen production in a compact reformer

    International Nuclear Information System (INIS)

    Ni Meng

    2013-01-01

    Highlights: ► A heat and mass transfer model is developed for a compact reformer. ► Hydrogen production from methane steam reforming is simulated. ► Increasing temperature greatly increases the reaction rates at the inlet. ► Temperature in the downstream is increased at higher rate of heat supply. ► Larger permeability enhances gas flow and reaction rates in the catalyst layer. - Abstract: Compact reformers (CRs) are promising devices for efficient fuel processing. In CRs, a thin solid plate is sandwiched between two catalyst layers to enable efficient heat transfer from combustion duct to the reforming duct for fuel processing. In this study, a 2D heat and mass transfer model is developed to investigate the fundamental transport phenomenon and chemical reaction kinetics in a CR for hydrogen production by methane steam reforming (MSR). Both MSR reaction and water gas shift reaction (WGSR) are considered in the numerical model. Parametric simulations are performed to examine the effects of various structural/operating parameters, such as pore size, permeability, gas velocity, temperature, and rate of heat supply on the reformer performance. It is found that the reaction rates of MSR and WGSR are the highest at the inlet but decrease significantly along the reformer. Increasing the operating temperature raises the reaction rates at the inlet but shows very small influence in the downstream. For comparison, increasing the rate of heat supply raises the reaction rates in the downstream due to increased temperature. A high gas velocity and permeability facilitates gas transport in the porous structure thus enhances reaction rates in the downstream of the reformer.

  7. Spectroscopic elucidation of energy transfer in hybrid inorganic-biological organisms for solar-to-chemical production.

    Science.gov (United States)

    Kornienko, Nikolay; Sakimoto, Kelsey K; Herlihy, David M; Nguyen, Son C; Alivisatos, A Paul; Harris, Charles B; Schwartzberg, Adam; Yang, Peidong

    2016-10-18

    The rise of inorganic-biological hybrid organisms for solar-to-chemical production has spurred mechanistic investigations into the dynamics of the biotic-abiotic interface to drive the development of next-generation systems. The model system, Moorella thermoacetica-cadmium sulfide (CdS), combines an inorganic semiconductor nanoparticle light harvester with an acetogenic bacterium to drive the photosynthetic reduction of CO 2 to acetic acid with high efficiency. In this work, we report insights into this unique electrotrophic behavior and propose a charge-transfer mechanism from CdS to M. thermoacetica Transient absorption (TA) spectroscopy revealed that photoexcited electron transfer rates increase with increasing hydrogenase (H 2 ase) enzyme activity. On the same time scale as the TA spectroscopy, time-resolved infrared (TRIR) spectroscopy showed spectral changes in the 1,700-1,900-cm -1 spectral region. The quantum efficiency of this system for photosynthetic acetic acid generation also increased with increasing H 2 ase activity and shorter carrier lifetimes when averaged over the first 24 h of photosynthesis. However, within the initial 3 h of photosynthesis, the rate followed an opposite trend: The bacteria with the lowest H 2 ase activity photosynthesized acetic acid the fastest. These results suggest a two-pathway mechanism: a high quantum efficiency charge-transfer pathway to H 2 ase generating H 2 as a molecular intermediate that dominates at long time scales (24 h), and a direct energy-transducing enzymatic pathway responsible for acetic acid production at short time scales (3 h). This work represents a promising platform to utilize conventional spectroscopic methodology to extract insights from more complex biotic-abiotic hybrid systems.

  8. Strategies to overcome oxygen transfer limitations during hairy root cultivation of Azadiracta indica for enhanced azadirachtin production.

    Science.gov (United States)

    Srivastava, Smita; Srivastava, Ashok Kumar

    2012-07-01

    The vast untapped potential of hairy root cultures as a stable source of biologically active chemicals has focused the attention of scientific community toward its commercial exploitation. However, the major bottleneck remains its successful scale-up. Due to branching, the roots form an interlocked matrix that exhibits resistance to oxygen transfer. Thus, present work was undertaken to develop cultivation strategies like optimization of inlet gas composition (in terms of % (v/v) O(2) in air), air-flow rate and addition of oxygen vectors in the medium, to curb the oxygen transfer limitations during hairy root cultivation of Azadirachta indica for in vitro azadirachtin (a biopesticide) production. It was found that increasing the oxygen fraction in the inlet air (in the range, 20-100% (v/v) O(2) in air) increased the azadirachtin productivity by approximately threefold, to a maximum of 4.42 mg/L per day (at 100% (v/v) O(2) in air) with respect to 1.68 mg/L per day in control (air with no oxygen supplementation). Similarly, increasing the air-flow rate (in the range, 0.3-2 vvm) also increased the azadirachtin productivity to a maximum of 1.84 mg/L per day at 0.8 vvm of air-flow rate. On the contrary, addition of oxygen vectors (in the range, 1-4% (v/v); hydrogen peroxide, toluene, Tween 80, kerosene, silicone oil, and n-hexadecane), decreased the azadirachtin productivity with respect to control (1.76 mg/L per day).

  9. Polonium-210 and Lead-210 in food and tobacco products: transfer parameters and normal exposure and dose

    International Nuclear Information System (INIS)

    Watson, A.P.

    1985-01-01

    Food-chain transport of Pb-210 and Po-210 from soil to edible plant parts and from animal feed to meat and milk was evaluated from a review of literature. The degree of transfer was characterized by estimating concentration factors as well as the transfer coefficients B/sub v/, B/sub r/, f/sub m/, and f/sub f/. Global dietary intake of Pb-210 and Po-210 was also summarized, and 50-y dose estimates to target organs were calculated. The greatest estimated ingestion doses were those to populations with large dietary complements of animal protein in the form of seafood (Japan) or caribou/reindeer muscle and organ meats (Arctic Eskimos and Lapps). The origin and magnitude of inhalation exposure and dose from tobacco products were also assessed. For the majority of internal organs evaluated, the dose resulting from smoking commercially available tobacco products is comparable with or greater than the dose estimates for ingestion of naturally occurring dietary Pb-210 and Po-210. 79 refs

  10. Prospective change control analysis of transfer of platelet concentrate production from a specialized stem cell transplantation unit to a blood transfusion center.

    Science.gov (United States)

    Sigle, Joerg-Peter; Medinger, Michael; Stern, Martin; Infanti, Laura; Heim, Dominik; Halter, Joerg; Gratwohl, Alois; Buser, Andreas

    2012-01-01

    Specialized centers claim a need for blood component production independent from the general blood transfusion services. We performed a prospective change control analysis of the transfer of platelet (PLT) production for hematological patients at the University Hospital Basel from the Department of Hematology to the Blood Transfusion Centre, Swiss Red Cross, Basel in February 2006. We wanted to demonstrate that neither quality nor transfusion outcome was affected. Production quantity and efficiency, product quality and transfusion outcome were systematically recorded. A 2-year pretransfer period was compared to a 2 year post-transfer period. After transfer production quantity at the Blood Transfusion Centre increased from 4,483 to 6,190 PLT concentrates. Production efficiency increased with a significant decrease in the rate of expired products (18% vs. 8%; P 5 × 10(11); P 5 vs. 10.7; P = 0.3) and the rate of patients with inadequate post-transfusion increment (31.5% vs. 32.1%; P = 0.6) did not differ. Supply and quality of PLT products was maintained after the transfer of PLT production to the Blood Transfusion Centre. An optimization of the supply chain process with markedly decreased expiration rates was achieved. These results argue against the need of specialized PLT production sites for selected patient groups. Copyright © 2012 Wiley Periodicals, Inc.

  11. MTR fuel element supply by CERCA through CECCN after the production transfer from NUKEM

    International Nuclear Information System (INIS)

    Hassel, H.W.

    1991-01-01

    The transfer of fuel element supply contracts, the corresponding Al-materials, structure parts, documents, uranium metal, customers related know-how, tools and equipment from NUKEM to CERCA has been completed, thus now giving a high flexibility for CERCA's workshop to fabricate and inspect large quantities of several types of fuel elements simultaneously. Based on this fact, on strategic planning for the next couple of years and on the fact that after 10 years of RERTR program the necessary high density fuel has been successfully developed and implemented, 'business as usual' in the field of fabrication has well become possible. The RERTR community should now use the great chance to concentrate all its efforts on problems which still strongly influence the fabrication and the use of MTR fuel elements: supply of enriched uranium,reprocessing capabilities and politics, transports of nuclear materials. (author)

  12. Evaluation of porcine stem cells competence for somatic cell nuclear transfer and production of cloned animals

    DEFF Research Database (Denmark)

    Secher, Jan; Liu, Ying; Petkov, Stoyan

    2017-01-01

    Porcine somatic cell nuclear transfer (SCNT) has been used extensively to create genetically modified pigs, but the efficiency of the methodology is still low. It has been hypothesized that pluripotent or multipotent stem cells might result in increased SCNT efficacy as these cells are closer than...... somatic cells to the epigenetic state found in the blastomeres and therefore need less reprogramming. Our group has worked with porcine SCNT during the last 20 years and here we describe our experience with SCNT of 3 different stem cell lines. The porcine stem cells used were: Induced pluripotent stem...... cells (iPSCs) created by lentiviral doxycycline-dependent reprogramming and cultered with a GSK3β- and MEK-inhibitor (2i) and leukemia inhibitor factor (LIF) (2i LIF DOX-iPSCs), iPSCs created by a plasmid-based reprogramming and cultured with 2i and fibroblast growth factor (FGF) (2i FGF Pl...

  13. Studies on heat transfer in agricultural products by far-infrared ray

    International Nuclear Information System (INIS)

    Liu, H.; Mohri, K.; Namba, K.

    1998-01-01

    Heat is transferred when the object being heated has temperature differences. In this research, the difference of two heating methods (far-infrared ray heating and hot wind heating) was analyzed. To compare their differences, the heat flux was measured by setting a heat flux meter beneath the surface of the object at different depths, then the heat conductivities and heat diffusion rates were analyzed. 1) Compared with hot wind, far-infrared ray heating has more heat flux before reaching a definite depth. 2) The heat conductivity and heat diffusion rates by hot wind heating have specific properties with special objects. The heat conductivity and heat diffusion rate of far-infrared heating are higher than those of hot wind heating. The differences are considered to be caused by far-infrared rays

  14. Calculational model and code for corrosion products transfer in sodium systems

    International Nuclear Information System (INIS)

    Iizawa, Katsuyuki; Kikuchi, Takao; Nihei, Isao; Horie, Junnosuke

    1987-01-01

    The parameters to predict LMFBR radioactive CP behaviour are obtained by fitting the model to the release rates and distribution of deposits in experimental sodium loops. Analysis of the downstream effect for Co-60 deposition confirms that the mechanism controlling Co-60 transfer is diffusion through the boundary sublayer in the flowing sodium. On the other hand, analysis of Mn-54 deposition suggests that the controlling mechanism for this nuclide is probably an intermediate case between diffusion-control in the liquid and reaction-control at steel surfaces. The super-stoichiometric release of Mn-54 and the sub-stoichiometric release of Co-60 are interpreted from their model parameters as being likely related to their solubilities in sodium. The computer code developed for this model is named PSYCHE. (orig./HP)

  15. Aeration and mass transfer optimization in a rectangular airlift loop photobioreactor for the production of microalgae.

    Science.gov (United States)

    Guo, Xin; Yao, Lishan; Huang, Qingshan

    2015-08-01

    Effects of superficial gas velocity and top clearance on gas holdup, liquid circulation velocity, mixing time, and mass transfer coefficient are investigated in a new airlift loop photobioreactor (PBR), and empirical models for its rational control and scale-up are proposed. In addition, the impact of top clearance on hydrodynamics, especially on the gas holdup in the internal airlift loop reactor, is clarified; a novel volume expansion technique is developed to determine the low gas holdup in the PBR. Moreover, a model strain of Chlorella vulgaris is cultivated in the PBR and the volumetric power is analyzed with a classic model, and then the aeration is optimized. It shows that the designed PBR, a cost-effective reactor, is promising for the mass cultivation of microalgae. Copyright © 2015 Elsevier Ltd. All rights reserved.

  16. Recombinant production and solution structure of lipid transfer protein from lentil Lens culinaris

    Energy Technology Data Exchange (ETDEWEB)

    Gizatullina, Albina K. [Shemyakin and Ovchinnikov Institute of Bioorganic Chemistry, Russian Academy of Sciences, Miklukho-Maklaya str., 16/10, 117997 Moscow (Russian Federation); Moscow Institute of Physics and Technology (State University), Department of Physicochemical Biology and Biotechnology, Institutskii per., 9, 141700, Dolgoprudny, Moscow Region (Russian Federation); Finkina, Ekaterina I.; Mineev, Konstantin S.; Melnikova, Daria N.; Bogdanov, Ivan V. [Shemyakin and Ovchinnikov Institute of Bioorganic Chemistry, Russian Academy of Sciences, Miklukho-Maklaya str., 16/10, 117997 Moscow (Russian Federation); Telezhinskaya, Irina N.; Balandin, Sergey V. [Shemyakin and Ovchinnikov Institute of Bioorganic Chemistry, Russian Academy of Sciences, Miklukho-Maklaya str., 16/10, 117997 Moscow (Russian Federation); Moscow Institute of Physics and Technology (State University), Department of Physicochemical Biology and Biotechnology, Institutskii per., 9, 141700, Dolgoprudny, Moscow Region (Russian Federation); Shenkarev, Zakhar O. [Shemyakin and Ovchinnikov Institute of Bioorganic Chemistry, Russian Academy of Sciences, Miklukho-Maklaya str., 16/10, 117997 Moscow (Russian Federation); Arseniev, Alexander S. [Shemyakin and Ovchinnikov Institute of Bioorganic Chemistry, Russian Academy of Sciences, Miklukho-Maklaya str., 16/10, 117997 Moscow (Russian Federation); Moscow Institute of Physics and Technology (State University), Department of Physicochemical Biology and Biotechnology, Institutskii per., 9, 141700, Dolgoprudny, Moscow Region (Russian Federation); Ovchinnikova, Tatiana V., E-mail: ovch@ibch.ru [Shemyakin and Ovchinnikov Institute of Bioorganic Chemistry, Russian Academy of Sciences, Miklukho-Maklaya str., 16/10, 117997 Moscow (Russian Federation); Moscow Institute of Physics and Technology (State University), Department of Physicochemical Biology and Biotechnology, Institutskii per., 9, 141700, Dolgoprudny, Moscow Region (Russian Federation)

    2013-10-04

    Highlights: •Lipid transfer protein from lentil seeds (Lc-LTP2) was overexpressed in E. coli. •Antimicrobial activity and spatial structure of the recombinant Lc-LTP2 were examined. •Internal tunnel-like lipid-binding cavity occupies ∼7% of the total Lc-LTP2 volume. •Binding of DMPG lipid induces moderate rearrangements in the Lc-LTP2 structure. •Lc-LTP2/DMPG complex has limited lifetime and dissociates within tens of hours. -- Abstract: Lipid transfer protein, designated as Lc-LTP2, was isolated from seeds of the lentil Lens culinaris. The protein has molecular mass 9282.7 Da, consists of 93 amino acid residues including 8 cysteines forming 4 disulfide bonds. Lc-LTP2 and its stable isotope labeled analogues were overexpressed in Escherichia coli and purified. Antimicrobial activity of the recombinant protein was examined, and its spatial structure was studied by NMR spectroscopy. The polypeptide chain of Lc-LTP2 forms four α-helices (Cys4-Leu18, Pro26-Ala37, Thr42-Ala56, Thr64-Lys73) and a long C-terminal tail without regular secondary structure. Side chains of the hydrophobic residues form a relatively large internal tunnel-like lipid-binding cavity (van der Waals volume comes up to ∼600 Å{sup 3}). The side-chains of Arg45, Pro79, and Tyr80 are located near an assumed mouth of the cavity. Titration with dimyristoyl phosphatidylglycerol (DMPG) revealed formation of the Lc-LTP2/lipid non-covalent complex accompanied by rearrangements in the protein spatial structure and expansion of the internal cavity. The resultant Lc-LTP2/DMPG complex demonstrates limited lifetime and dissociates within tens of hours.

  17. Recombinant production and solution structure of lipid transfer protein from lentil Lens culinaris

    International Nuclear Information System (INIS)

    Gizatullina, Albina K.; Finkina, Ekaterina I.; Mineev, Konstantin S.; Melnikova, Daria N.; Bogdanov, Ivan V.; Telezhinskaya, Irina N.; Balandin, Sergey V.; Shenkarev, Zakhar O.; Arseniev, Alexander S.; Ovchinnikova, Tatiana V.

    2013-01-01

    Highlights: •Lipid transfer protein from lentil seeds (Lc-LTP2) was overexpressed in E. coli. •Antimicrobial activity and spatial structure of the recombinant Lc-LTP2 were examined. •Internal tunnel-like lipid-binding cavity occupies ∼7% of the total Lc-LTP2 volume. •Binding of DMPG lipid induces moderate rearrangements in the Lc-LTP2 structure. •Lc-LTP2/DMPG complex has limited lifetime and dissociates within tens of hours. -- Abstract: Lipid transfer protein, designated as Lc-LTP2, was isolated from seeds of the lentil Lens culinaris. The protein has molecular mass 9282.7 Da, consists of 93 amino acid residues including 8 cysteines forming 4 disulfide bonds. Lc-LTP2 and its stable isotope labeled analogues were overexpressed in Escherichia coli and purified. Antimicrobial activity of the recombinant protein was examined, and its spatial structure was studied by NMR spectroscopy. The polypeptide chain of Lc-LTP2 forms four α-helices (Cys4-Leu18, Pro26-Ala37, Thr42-Ala56, Thr64-Lys73) and a long C-terminal tail without regular secondary structure. Side chains of the hydrophobic residues form a relatively large internal tunnel-like lipid-binding cavity (van der Waals volume comes up to ∼600 Å 3 ). The side-chains of Arg45, Pro79, and Tyr80 are located near an assumed mouth of the cavity. Titration with dimyristoyl phosphatidylglycerol (DMPG) revealed formation of the Lc-LTP2/lipid non-covalent complex accompanied by rearrangements in the protein spatial structure and expansion of the internal cavity. The resultant Lc-LTP2/DMPG complex demonstrates limited lifetime and dissociates within tens of hours

  18. Mechanisms of electron transfer from structrual Fe(II) in reduced nontronite to oxygen for production of hydroxyl radicals

    Science.gov (United States)

    Yuan, Songhu; Liu, Xixiang; Liao, Wenjuan; Zhang, Peng; Wang, Xiaoming; Tong, Man

    2018-02-01

    Production of hydroxyl radicals (radOH) has been recently revealed upon oxygenation of sediments in redox-dynamic subsurface environments. In particular, Fe(II)-bearing clay minerals are the major sediment components contributing to radOH production upon oxygenation, and the produced radOH can oxidize contaminants and inactivate bacteria. Whereas, the mechanisms of radOH production from oxygenation of Fe(II)-bearing clay minerals remain elusive. The objectives of this study were to identify the structural variation of Fe(II) entities during the oxidation of Fe(II)-bearing clay minerals by O2, and to unravel the mechanisms of electron transfer within the mineral structure and from mineral to O2 for radOH production. Nontronite (NAu-2, 23% Fe) which was chemically reduced to 54.5% Fe(II) in total Fe was used as a model Fe(II)-bearing clay mineral. Production of radOH and oxidation of Fe(II) were measured during the oxidation of reduced NAu-2 by O2. A wide spectrum of spectroscopic techniques, including Fourier transform infrared spectroscopy (FTIR), Fe K-edge X-ray absorption spectroscopy (XAS), Mössbauer spectra, and X-ray photoelectron spectroscopy (XPS), were employed to explore the structural variation of Fe(II) entities in NAu-2 and the electron transfer within NAu-2 and from NAu-2 to O2. For 180 min oxidation of 1 g/L reduced NAu-2, a biphasic radOH production was observed, being quick within the initial 15 min and slow afterwards. Production of radOH correlates well with oxidation of Fe(II) in the reduced NAu-2. Within the initial 15 min, trioctahedral Fe(II)-Fe(II)-Fe(II) entities and edge Fe(II) in the reduced NAu-2 were preferentially and quickly oxidized, and electrons from the interior Fe(II)-Fe(II)-Fe(II) entities were most likely ejected from the basal siloxane plane to O2. Meanwhile, trioctahedral Fe(II)-Fe(II)-Fe(II) entities were mainly transformed to dioctahedral Fe(II)-Fe(II) entities. When the time of oxygenation was longer than 15 min

  19. The Transfer of Core-Based Hazardous Production Processes to the Export Processing Zones of the Periphery: The Maquiladora Centers of Northern Mexico

    Directory of Open Access Journals (Sweden)

    R. Scott Frey

    2015-08-01

    Full Text Available Transnational corporations appropriate 'carrying capacity" for the core by transferring the core's hazardous products, production processes, and wastes to the peripheral countries of the world-system. An increasingly important form of this reproduction process is the transfer of core-based hazardous industries to export processing zones (EPZs locatedin a number of peripheral countries in Africa, Asia, and Latin America and the Caribbean. A specific case is examined in this paper: the transfer of hazardous industries to the maquiladora centers located on the Mexican side of the Mexico-U.S. border. Maquiladoras provide an excellent case for examining what is known about the causes, adverse consequences, and political responses associated with the transfer of core-based hazardous production processes to the EPZs of the periphery.

  20. On Heat Transfer - Stress Analysis of Modified Brick (Reed Filler) Upon Its Production Stage

    Science.gov (United States)

    Ornam, Kurniati; Kimsan, Masykur; Teguh Prakasa, Cadas; Ode Ngkoimani, La; Santi

    2017-05-01

    This paper aimed to scrutinize how burning process in modified brick’s production impinge on crack as a result of stress differentiation between two consecutive layers of the brick’s element. Diffusion engages in burning process of bricks, hence it generates thermal stress on element for different temperature between layers. This research focused on burning process in traditional production ward. Analytical of nonlinear equation and numerical solution, finite difference, were involved to obtain temperature value in each layer, followed by stress calculation. Based on the results, it can be concluded that crack occurs particularly on boundary area, since difussion tends to yield relatively more different value on it. Therefore, certain strategies, that may decrease this differentiation, are required to minimize number of cracks during brick’s production.

  1. Adoption, nation, migration

    DEFF Research Database (Denmark)

    Müller, Anders Riel

    2013-01-01

    Som transnationalt adopteret vokser man ofte op med en fortælling om, at man er født i et fattigt land. Og at ens første forældre var fattige eller oplevede så store problemer, at de ikke så andre muligheder end at afgive en til adoption. Det er en historie, man bliver fortalt igen og igen. Og som...... man ender med at fortælle sig selv. Fattigdom er problemet. Adoption er løsningen. Eller er det?...

  2. A Non-Modeling Exploration of Residential Solar Photovoltaic (PV) Adoption and Non-Adoption

    Energy Technology Data Exchange (ETDEWEB)

    Moezzi, Mithra [Portland State Univ., Portland, OR (United States); Ingle, Aaron [Portland State Univ., Portland, OR (United States); Lutzenhiser, Loren [Portland State Univ., Portland, OR (United States); Sigrin, Benjamin O. [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-01

    Although U.S. deployment of residential rooftop solar photovoltaic (PV) systems has accelerated in recent years, PV is still installed on less than 1 percent of single-family homes. Most research on household PV adoption focuses on scaling initial markets and modeling predicted growth rather than considering more broadly why adoption occurs. Among the studies that have investigated the characteristics of PV adoption, most collected data from adopters, sometimes with additional non-adopter data, and rarely from people who considered but did not adopt PV. Yet the vast majority of Americans are non-adopters, and they are a diverse group - understanding their ways of evaluating PV adoption is important. Similarly, PV is a unique consumer product, which makes it difficult to apply findings from studies of other technologies to PV. In addition, little research addresses the experience of households after they install PV. This report helps fill some of these gaps in the existing literature. The results inform a more detailed understanding of residential PV adoption, while helping ensure that adoption is sufficiently beneficial to adopters and even non-adopters.

  3. Linking Ecosystem Services Benefit Transfer Databases and Ecosystem Services Production Function Libraries

    Science.gov (United States)

    The quantification or estimation of the economic and non-economic values of ecosystem services can be done from a number of distinct approaches. For example, practitioners may use ecosystem services production function models (ESPFMs) for a particular location, or alternatively, ...

  4. Heat and mass transfer during cooling and storage of agricultural products as influenced by natural convection

    NARCIS (Netherlands)

    Beukema, K.J.

    1980-01-01

    Three different models of bulk-stored agricultural products with air flow through the bulk, predicting the temperature profiles or the velocity of natural convection, are developed. The temperature distribution in a cylindrical container with insulated walls and open top and bottom, filled

  5. Making Productive Use of Exemplars: Peer Discussion and Teacher Guidance for Positive Transfer of Strategies

    Science.gov (United States)

    To, Jessica; Carless, David

    2016-01-01

    Discussion of exemplars of student work is a productive means of explaining tacit knowledge and guiding students into the requirements of academic writing. Through two cycles of action research in a post-secondary institution in Hong Kong, this study examines how exemplars can be used to enhance student understanding of quality and to promote…

  6. Transfer products from the reactions of heavy ions with heavy nuclei

    International Nuclear Information System (INIS)

    Thomas, K.E. III.

    1979-11-01

    Production of nuclides heavier than the target from 86 Kr- and 136 Xe-induced reactions with 181 Ta and 238 U was investigated. Attempts were made to produce new neutron-excess Np and Pu isotopes by the deep inelastic mechanism. No evidence was found for 242 Np or 247 Pu. Estimates were made for the production of 242 Np, 247 Pu, and 248 Am from heavy-ion reactions with uranium targets. Comparisons of reactions of 86 Kr and 136 Xe ions with thick 181 Ta targets and 86 Kr, 136 Xe and 238 U ions with thick 238 U targets indicate that the most probable products are not dependent on the projectile. The most probable products can be predicted by the equation Z - Z/sub target/ = 0.43 (A - A/sub target/) + 1.0. The major effect of the projectile is the magnitude of the production cross section of the heavy products. Based on these results, estimates are made of the most probable mass of element 114 produced from heavy-ion reactions with 248 Cm and 254 Es targets. These estimates give the mass number of element 114 as approx. 287 if produced in heavy-ion reactions with these very heavy targets. Excitation functions of gold and bismuth isotopes arising from 86 Kr- and 136 Xe-induced reactions with thin 181 Ta targets were measured. These results indicate that the shape and location (in Z and A above the target) of the isotopic distributions are not strongly dependent on the projectile incident energy. Also, the nuclidic cross sections are found to increase with an increase in projectile energy to a maximum at approximately 1.4 to 1.5 times the Coulomb barrier. Above this maximum, the nuclidic cross sections are found to decrease with an increase in projectile energy. This decrease in cross section is believed to be due to fission of the heavy products caused by high excitation energy and angular momentum. 111 references, 39 figures, 34 tables

  7. Beyond preadoptive risk: The impact of adoptive family environment on adopted youth's psychosocial adjustment.

    Science.gov (United States)

    Ji, Juye; Brooks, Devon; Barth, Richard P; Kim, Hansung

    2010-07-01

    Adopted children often are exposed to preadoptive stressors--such as prenatal substance exposure, child maltreatment, and out-of-home placements--that increase their risks for psychosocial maladjustment. Psychosocial adjustment of adopted children emerges as the product of pre- and postadoptive factors. This study builds on previous research, which fails to simultaneously assess the influences of pre- and postadoptive factors, by examining the impact of adoptive family sense of coherence on adoptee's psychosocial adjustment beyond the effects of preadoptive risks. Using a sample of adoptive families (n = 385) taking part in the California Long Range Adoption Study, structural equation modeling analyses were performed. Results indicate a significant impact of family sense of coherence on adoptees' psychosocial adjustment and a considerably less significant role of preadoptive risks. The findings suggest the importance of assessing adoptive family's ability to respond to stress and of helping families to build and maintain their capacity to cope with stress despite the sometimes fractious pressures of adoption.

  8. Beyond the adoption/ non-adoption dichotomy: the impact of innovation characteristics on potential adopters' transition through adoption process stages

    NARCIS (Netherlands)

    Agarwal, M.K.; Frambach, R.T.

    2002-01-01

    Research on innovation adoption has suffered from a bias towards understanding the factors that affect the dichotomous adoption/non-adoption decision.Much less attention is devoted to the question why potential adopters fail to progress to the adoption stage from earlier stages in the decision

  9. Gender differences in adoption of recommended improved cassava ...

    African Journals Online (AJOL)

    Gender differences in adoption of recommended improved cassava production ... (39%) are involved in full time farm employment and the incidence of single parenthood ... The females on the other hand recorded higher adoption rates of the ...

  10. CERTS customer adoption model

    Energy Technology Data Exchange (ETDEWEB)

    Rubio, F. Javier; Siddiqui, Afzal S.; Marnay, Chris; Hamachi,Kristina S.

    2000-03-01

    This effort represents a contribution to the wider distributed energy resources (DER) research of the Consortium for Electric Reliability Technology Solutions (CERTS, http://certs.lbl.gov) that is intended to attack and, hopefully, resolve the technical barriers to DER adoption, particularly those that are unlikely to be of high priority to individual equipment vendors. The longer term goal of the Berkeley Lab effort is to guide the wider technical research towards the key technical problems by forecasting some likely patterns of DER adoption. In sharp contrast to traditional electricity utility planning, this work takes a customer-centric approach and focuses on DER adoption decision making at, what we currently think of as, the customer level. This study reports on Berkeley Lab's second year effort (completed in Federal fiscal year 2000, FY00) of a project aimed to anticipate patterns of customer adoption of distributed energy resources (DER). Marnay, et al., 2000 describes the earlier FY99 Berkeley Lab work. The results presented herein are not intended to represent definitive economic analyses of possible DER projects by any means. The paucity of data available and the importance of excluded factors, such as environmental implications, are simply too important to make such an analysis possible at this time. Rather, the work presented represents a demonstration of the current model and an indicator of the potential to conduct more relevant studies in the future.

  11. Åben Adoption

    DEFF Research Database (Denmark)

    Jeldtoft, Nadia

    2007-01-01

    Denne rapport er en systematisk forskningsoversigt over udenlandske erfaringer med adoption i forhold til anbringelse uden for hjemmet, fx familiepleje, institutionsanbringelse og hjemgivelse til de biologiske forældre. Konklusionerne i rapporten er overraskende entydige: Adopterede børn klarer sig...

  12. Adoption som indsats

    DEFF Research Database (Denmark)

    Christoffersen, Mogens; Hammen, Ida; Raft Andersen, Karen

    Denne rapport er en systematisk forskningsoversigt over udenlandske erfaringer med adoption i forhold til anbringelse uden for hjemmet, fx familiepleje, institutionsanbringelse og hjemgivelse til de biologiske forældre. Konklusionerne i rapporten er overraskende entydige: Adopterede børn klarer sig...

  13. A study on the transfer of heavy methals released by Chinese commercial products.

    Science.gov (United States)

    Olori, Angelo; Campopiano, Antonella; Cannizzaro, Annapaola; Basili, Fulvio

    2013-01-01

    Studies by The World trade Organization (WTO) and the Organization for the Economic Cooperation and Development (OECD) state that the trade on counterfeit goods corresponds to 10% of the global trade and it is worth 450 billion dollars. In this work we studied the transfer of toxic metals released by some Chinese watches causing significant allergic dermatitis. Several samples of dust released from metal parts got collected. Such powders were observed at the Electron Microscope complete with EDAX spectrometer. In all the studied dust samples we identified the following chemical elements: Cu, Ni and Zn. The SEM analysis has identified two predominant phases such as pure nickel and brass alloy (Cu-Zn). The first metal subjected to cession and to corrosion phenomena is nickel. The main causes of corrosion in the studied materials were due to the presence of chloride ions. Among the ceased metals found in our study nickel is the most dangerous. Scientific evidence now agree that nickel and certain nickel compounds are toxic and highly harmful to human health they indeed cause allergic contact dermatitis (DAC).

  14. Open adoption of infants: adoptive parents' feelings seven years later.

    Science.gov (United States)

    Siegel, Deborah H

    2003-07-01

    Adoptions today increasingly include contact between adoptive and birth families. What do these "open adoptions" look like? How do the participants feel about them? This article, based on part of a longitudinal study that first examined adoptive parents' perceptions of their infants' open adoptions seven years ago, explores the parents' reactions now that their children are school age. This qualitative descriptive research revealed changes in the openness in the adoptions over time and identified four dimensions along which open adoptions vary. Findings showed parents' enthusiasm for the openness in their adoptions, regardless of the type and extent of openness. Implications for social work practice, education, and policy are explored.

  15. Role of ion transfer membrane in the production of uranous nitrate

    International Nuclear Information System (INIS)

    Nair, M.K.T.; Singh, R.K.; Bajpai, D.D.; Venugopalan, A.K.; Singh, R.R.; Gurba, P.B.; Thomas, Mathew

    1992-01-01

    In Purex process, plutonium and uranium are co-extracted into organic phase and these are partitioned by reducing Pu(IV) to Pu(III) using hydrazine stabilized uranous nitrate solution. Usually, uranous nitrate is added in much higher quantity than the stoichiometric requirement to effect complete reduction of plutonium. In conventional electrolytic cells only 60 to 70% of uranyl to uranous conversion is achieved. Use of this solution results in dilution of plutonium product. In addition to this, each externally fed uranous nitrate batch increases uranium processing load and affects the plant throughput. In order to keep the additional uranium processing load to a minimum, it is necessary to increase the uranous content to near cent percent level in the externally fed uranous nitrate solution. The studies carried out at PREFRE (Power Reactor Fuel Reprocessing) laboratory have shown that it is possible to produce concentrated uranous nitrate solution, nearly free from uranyl nitrate, by using a cation exchange membrane. This paper describes the development work carried out at PREFRE plant, Tarapur for production of cent percent uranous nitrate solution. Development of electrolytic cells for uranous production, from laboratory scale to pilot plant scale, has been explained. (author). 24 refs., 8 figs., 8 tabs

  16. Thermodynamic and heat transfer analysis of LNG energy recovery for power production

    International Nuclear Information System (INIS)

    Franco, A; Casarosa, C

    2014-01-01

    An important option to transport the gas is to convert it into liquid natural gas (LNG) and convey it using insulated LNG tankers. At receiving terminals, the LNG is offloaded into storage tanks and then pumped at the required pressure and vaporized for final transmission to the pipeline. The LNG production process consumes a considerable amount of energy, while the cold availability, as also known as cold energy, has been stored in LNG. At a receiving terminal, LNG needs to be evaporated into gas at environmental temperature before fed into the gas distribution system. Seawater is commonly used for the regasification process of the LNG. In the present paper, after a general analysis of the perspectives of the various thermodynamic schemes proposed for power production from the regasification, a detailed analysis of enhanced direct expansion system is carried out in order to identify the upper level of the energy that can be recovered. The analysis outlines that power production typical of optimized ORC plant configurations (120 kJ/kg) can be obtained with direct expansion solutions

  17. Thermodynamic and heat transfer analysis of LNG energy recovery for power production

    Science.gov (United States)

    Franco, A.; Casarosa, C.

    2014-11-01

    An important option to transport the gas is to convert it into liquid natural gas (LNG) and convey it using insulated LNG tankers. At receiving terminals, the LNG is offloaded into storage tanks and then pumped at the required pressure and vaporized for final transmission to the pipeline. The LNG production process consumes a considerable amount of energy, while the cold availability, as also known as cold energy, has been stored in LNG. At a receiving terminal, LNG needs to be evaporated into gas at environmental temperature before fed into the gas distribution system. Seawater is commonly used for the regasification process of the LNG. In the present paper, after a general analysis of the perspectives of the various thermodynamic schemes proposed for power production from the regasification, a detailed analysis of enhanced direct expansion system is carried out in order to identify the upper level of the energy that can be recovered. The analysis outlines that power production typical of optimized ORC plant configurations (120 kJ/kg) can be obtained with direct expansion solutions.

  18. Gradient flux measurements of sea–air DMS transfer during the Surface Ocean Aerosol Production (SOAP experiment

    Directory of Open Access Journals (Sweden)

    M. J. Smith

    2018-04-01

    Full Text Available Direct measurements of marine dimethylsulfide (DMS fluxes are sparse, particularly in the Southern Ocean. The Surface Ocean Aerosol Production (SOAP voyage in February–March 2012 examined the distribution and flux of DMS in a biologically active frontal system in the southwest Pacific Ocean. Three distinct phytoplankton blooms were studied with oceanic DMS concentrations as high as 25 nmol L−1. Measurements of DMS fluxes were made using two independent methods: the eddy covariance (EC technique using atmospheric pressure chemical ionization–mass spectrometry (API-CIMS and the gradient flux (GF technique from an autonomous catamaran platform. Catamaran flux measurements are relatively unaffected by airflow distortion and are made close to the water surface, where gas gradients are largest. Flux measurements were complemented by near-surface hydrographic measurements to elucidate physical factors influencing DMS emission. Individual DMS fluxes derived by EC showed significant scatter and, at times, consistent departures from the Coupled Ocean–Atmosphere Response Experiment gas transfer algorithm (COAREG. A direct comparison between the two flux methods was carried out to separate instrumental effects from environmental effects and showed good agreement with a regression slope of 0.96 (r2 = 0.89. A period of abnormal downward atmospheric heat flux enhanced near-surface ocean stratification and reduced turbulent exchange, during which GF and EC transfer velocities showed good agreement but modelled COAREG values were significantly higher. The transfer velocity derived from near-surface ocean turbulence measurements on a spar buoy compared well with the COAREG model in general but showed less variation. This first direct comparison between EC and GF fluxes of DMS provides confidence in compilation of flux estimates from both techniques, as well as in the stable periods when the observations are not well predicted by the COAREG

  19. Gradient flux measurements of sea-air DMS transfer during the Surface Ocean Aerosol Production (SOAP) experiment

    Science.gov (United States)

    Smith, Murray J.; Walker, Carolyn F.; Bell, Thomas G.; Harvey, Mike J.; Saltzman, Eric S.; Law, Cliff S.

    2018-04-01

    Direct measurements of marine dimethylsulfide (DMS) fluxes are sparse, particularly in the Southern Ocean. The Surface Ocean Aerosol Production (SOAP) voyage in February-March 2012 examined the distribution and flux of DMS in a biologically active frontal system in the southwest Pacific Ocean. Three distinct phytoplankton blooms were studied with oceanic DMS concentrations as high as 25 nmol L-1. Measurements of DMS fluxes were made using two independent methods: the eddy covariance (EC) technique using atmospheric pressure chemical ionization-mass spectrometry (API-CIMS) and the gradient flux (GF) technique from an autonomous catamaran platform. Catamaran flux measurements are relatively unaffected by airflow distortion and are made close to the water surface, where gas gradients are largest. Flux measurements were complemented by near-surface hydrographic measurements to elucidate physical factors influencing DMS emission. Individual DMS fluxes derived by EC showed significant scatter and, at times, consistent departures from the Coupled Ocean-Atmosphere Response Experiment gas transfer algorithm (COAREG). A direct comparison between the two flux methods was carried out to separate instrumental effects from environmental effects and showed good agreement with a regression slope of 0.96 (r2 = 0.89). A period of abnormal downward atmospheric heat flux enhanced near-surface ocean stratification and reduced turbulent exchange, during which GF and EC transfer velocities showed good agreement but modelled COAREG values were significantly higher. The transfer velocity derived from near-surface ocean turbulence measurements on a spar buoy compared well with the COAREG model in general but showed less variation. This first direct comparison between EC and GF fluxes of DMS provides confidence in compilation of flux estimates from both techniques, as well as in the stable periods when the observations are not well predicted by the COAREG model.

  20. Production of 149Tb in deep inelastic transfer reactions: an approach to the angular momentum of fragments

    International Nuclear Information System (INIS)

    Rivet, M.F.; Bimbot, R.; Gardes, D.; Fleury, A.; Hubert, F.; Llabador, Y.

    1978-01-01

    The excitation functions for deep inelastic reactions in which two to six charges are transferred from 40 Ar and 63 Cu ions to rare earth targets have been measured using activation techniques, the observed radionuclides being 150 Dy, 151 Dy and 149 gTb. From the comparison of the curves relative to 149 gTb and those relative to 150 Dy, 151 Dy, it was deduced that the low spin isomer 149 gTb was produced with significant probability for low incident energies. Using data from (heavy ions, xn) reactions, it was possible to attribute this production to the deexcitation of Tb fragments formed in deep inelastic transfers with angular momenta lower than 9n. This result is in good agreement with the angular momentum calculations performed under the hypothesis that the initial angular momentum window leading to deep inelastic reactions is situated between the critical angular momentum for fusion and that corresponding to grazing collisions. As far as Cu induced reactions are concerned, both hypothesis of rolling and sticking are consistent with the experimental data. For Ar induced reactions, the results indicate that the stage of sticking is not reached when the incident energy is lower than 200 MeV

  1. Adopted Adolescents' Preoccupation with Adoption: The Impact on Adoptive Family Relationships.

    Science.gov (United States)

    Kohler, Julie K.; Grotevant, Harold D.; McRoy, Ruth G.

    2002-01-01

    Examines relationship between intensity of adopted adolescents' thinking about their adoptions and their adoptive family relationships in 135 adopted adolescents. Adolescents with extremely high levels of preoccupation reported significantly higher levels of alienation and significantly lower levels of trust for their adoptive mothers and fathers.…

  2. Forage Production Technology Transfer in Kwale and Kilifi Districts of Coast Province

    International Nuclear Information System (INIS)

    Mwatate, C.D; Ramadhan, C.D.A; Njunie, M.N

    1999-01-01

    A forage production and utilisation programme was introduced in Kwale (AEZ CL2/CL3) and Kilifi (AEZ CL3/CL4) districts to combat major constraint in low quality and quantity feed at the coast. Dairy production had a great market potential stimulated by the high urban and rural population. Willing farmers were invited to PRC-Mtwapa to see how grasses, legumes and multipurpose trees would fit in their mixed maize cassava farming system. After explaining the forage characteristics to the farmers, they were allowed to select a maximum of three out of eight legumes (Vigna Unguiculata; Dolichos lablab; Clitoria tanatea; Stylosanthes guianennsis; Mucuna pruriens; Pueraria phaseloids; Macroptlium atropurpureum and Centrosema pubescens), tree out of five Napier grasses (Cultivar Mott, Clone 13, French Cameroon, Gold Coast and Bana). Giant panicum and and one of the two multipurpose trees (Gliricidia sepium and Leucaena leucocephala) to test in their farms. After planting in mid 1996 on-farm the research-extension team monitored ground cover and labor aplied monthly by gender, green leaf production, and survival over the drought in 1997. Along-side the planted forages, actual forage fed by dairy farmers was sampled, analysed for chemical composition and degradability to advise farmers on ration formulation. Ranking by farmers showed a preference for clitiria, Macuna and Dolichos in Kwale as the three best legumes. More than 70% of Napier grass variety had established while establishment rate of gliricidia was 33%. An extension leaflet developed during the study will be used to disseminate the information in the region

  3. Overview and analysis of current BIPV products: new criteria for supporting the technological transfer in the building sector

    Directory of Open Access Journals (Sweden)

    Pierluigi Bonomo

    2015-12-01

    Full Text Available The growing demand for nearly-Zero Energy Buildings is rapidly contributing to change the building skin from being a passive barrier towards a sensitive and active interface. Building Integrated Photovoltaics (BIPV is a unique solution for delivering clean, safe, affordable and decentralized electricity to people transforming the building surfaces in active solar collectors. Despite photovoltaic (PV technology and their basic usage are today known to everybody, the particular requirements for building integration have brought to the surface some issues over the years so that BIPV is still a niche market. Starting from this observation, the paper presents the results of an investigation on the current market of BIPV products for roofs and façade. The analysis aimed to identify the relevant possibilities the products today offer and the level of information that the producers make available within the technical description of BIPV systems. After disclosing the actual lack of information in comparison to conventional building products, the authors propose to implement a new “building-based” approach that could support the BIPV market by including a more comprehensive description of the product’s quality (today mainly comprising electrical and basic physical features. Such a “building-technology” perspective, also considering the recent normative framework in BIPV field, is expected to encourage the technological transfer of PV in the building sector by facilitating the daily work of architects, installers and the whole value chain.

  4. The Commtech Methodology: A Demand-Driven Approach to Efficient, Productive, and Measurable Technology Transfer and Commercialization

    Science.gov (United States)

    Horsham, Gary A. P.

    1999-01-01

    This paper presents a comprehensive review and assessment of a demonstration technology transfer and commercialization prouram called "CommTech". The pro-ram was conceived and initiated in early to mid-fiscal year 1995, and extended roughly three years into the future. Market research sources were used to initially gather primary technological problems and needs data from non-aerospace companies in three targeted industry sectors: environmental, surface transportation, and bioengineering. Company-supplied information served as input data to activate or start-up an internal, phased matchmaking process. This process was based on technical-level relationship exploration followed by business-level agreement negotiations. and culminated with project management and execution. Space Act Agreements represented near-term outputs. Company product or process commercialization derived from NASA Glenn support and measurable economic effects represented far-term outputs.

  5. Heavy metals in intensive greenhouse vegetable production systems along Yellow Sea of China: Levels, transfer and health risk.

    Science.gov (United States)

    Hu, Wenyou; Huang, Biao; Tian, Kang; Holm, Peter E; Zhang, Yanxia

    2017-01-01

    Recently, greenhouse vegetable production (GVP) has grown rapidly and counts a large proportion of vegetable production in China. In this study, the accumulation, health risk and threshold values of selected heavy metals were evaluated systematically. A total of 120 paired soil and vegetable samples were collected from three typical intensive GVP systems along the Yellow Sea of China. Mean concentrations of Cd, As, Hg, Pb, Cu and Zn in greenhouse soils were 0.21, 7.12, 0.05, 19.81, 24.95 and 94.11 mg kg -1 , respectively. Compared to rootstalk and fruit vegetables, leafy vegetables had relatively high concentrations and transfer factors of heavy metals. The accumulation of heavy metals in soils was affected by soil pH and soil organic matter. The calculated hazard quotients (HQ) of the heavy metals by vegetable consumption decreased in the order of leafy > rootstalk > fruit vegetables with hazard index (HI) values of 0.61, 0.33 and 0.26, respectively. The HI values were all below 1, which indicates that there is a low risk of greenhouse vegetable consumption. Soil threshold values (STVs) of heavy metals in GVP system were established according to the health risk assessment. The relatively lower transfer factors of rootstalk and fruit vegetables and higher STVs suggest that these types of vegetables are more suitable for cultivation in greenhouse soils. This study will provide an useful reference for controlling heavy metals and developing sustainable GVP. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Characterisation of adopters and non-adopters of dairy technologies in Ethiopia and Kenya

    NARCIS (Netherlands)

    Kebebe, E.G.; Oosting, S.J.; Baltenweck, I.; Duncan, A.J.

    2017-01-01

    While there is a general consensus that using dairy technologies, such as improved breeds of dairy cows, can substantially increase farm productivity and income, adoption of such technologies has been generally low in developing countries. The underlying reasons for non-adoption of beneficial

  7. Adoption, nation, migration

    DEFF Research Database (Denmark)

    Müller, Anders Riel

    2013-01-01

    Som transnationalt adopteret vokser man ofte op med en fortælling om, at man er født i et fattigt land. Og at ens første forældre var fattige eller oplevede så store problemer, at de ikke så andre muligheder end at afgive en til adoption. Det er en historie, man bliver fortalt igen og igen. Og so...

  8. Adoption of Broadband Services

    DEFF Research Database (Denmark)

    Falch, Morten

    2008-01-01

    Broadband is seen as a key infrastructure for developing the information society. For this reason many Governments are actively engaged in stimulating investments in broadband infrastructures and use of broadband services. This chapter compares a wide range of broadband strategies in the most suc....... Many countries have provided active support for stimulating diffusion of broadband and national variants of this type of policies in different countries are important for an explanation of national differences in adoption of broadband....

  9. VAT: ways of improving administration and calculation during transshipment and transfer of oil and oil products

    Directory of Open Access Journals (Sweden)

    Vasiliy F. Stoykov

    2017-12-01

    Full Text Available Objective to eliminate legal uncertainty in interpretation and implementation of a legal norm para. 4 subclause 2.2. clause 1 Art. 164 of the Taxation Code of the Russian Federation to elaborate proposals for improving the Russian legislation on taxes and duties which is essential for elimination of the said problems. Methods the research is based on a set of general scientific and specific methods of cognition used in the science of Financial Law dialectic method formaldogmatic method methods of analysis analogy induction and synthesis historical retrospective formalization and logical method. Results the article presents theoreticallegal analysis of the consequences of ambiguous interpretation of a legal norm para. 4 subclause 2.2. clause 1 Art. 164 of the Taxation Code of the Russian Federation in relation to organizations rendering services in the sphere of oil and oil products transportation and transshipment. It is stated that one of the essential problems in the practice of value added tax implementation is the use of zero tax rate. When the norms of the above Article are interpreted it causes problems in organizations engaged in oil and oil products transportation and transshipment due to the differences in positions of the Russian Ministry of Finance and the taxation authorities about the location of works to be referred to transshipment. Another problem is narrow comprehension of organizations engaged in oil transportation as well as uncertainty of norms related to the terminology of oil transportation transshipment and reloading. All the above inaccuracies and ambiguities in legislation lead to problems in organizations engaged in oil transportation as is shown by the example of ldquoMarine Port Servicerdquo Close Corporation. The author also presents the results of analysis of judicial practice in the sphere of interpreting para. 4 subclause 2.2. clause 1 Art. 164 of the Taxation Code of the Russian Federation. The possible

  10. Hospitious Adoption: How Hospitality Empowers Children and Transforms Adoption

    Science.gov (United States)

    Gritter, James L.

    2009-01-01

    Building on previous books by the author, "Hospitious Adoption: How Hospitality Empowers Children and Transforms Adoption" examines the next step after open adoption. Gritter takes the approach that practicing goodwill, respect, and courage within the realm of adoption makes the process move smoother and enriches children's lives. Following a…

  11. Rational and Efficient Preparative Isolation of Natural Products by MPLC-UV-ELSD based on HPLC to MPLC Gradient Transfer.

    Science.gov (United States)

    Challal, Soura; Queiroz, Emerson Ferreira; Debrus, Benjamin; Kloeti, Werner; Guillarme, Davy; Gupta, Mahabir Prashad; Wolfender, Jean-Luc

    2015-11-01

    In natural product research, the isolation of biomarkers or bioactive compounds from complex natural extracts represents an essential step for de novo identification and bioactivity assessment. When pure natural products have to be obtained in milligram quantities, the chromatographic steps are generally labourious and time-consuming. In this respect, an efficient method has been developed for the reversed-phase gradient transfer from high-performance liquid chromatography to medium-performance liquid chromatography for the isolation of pure natural products at the level of tens of milligrams from complex crude natural extracts. The proposed method provides a rational way to predict retention behaviour and resolution at the analytical scale prior to medium-performance liquid chromatography, and guarantees similar performances at both analytical and preparative scales. The optimisation of the high-performance liquid chromatography separation and system characterisation allows for the prediction of the gradient at the medium-performance liquid chromatography scale by using identical stationary phase chemistries. The samples were introduced in medium-performance liquid chromatography using a pressure-resistant aluminium dry load cell especially designed for this study to allow high sample loading while maintaining a maximum achievable flow rate for the separation. The method has been validated with a mixture of eight natural product standards. Ultraviolet and evaporative light scattering detections were used in parallel for a comprehensive monitoring. In addition, post-chromatographic mass spectrometry detection was provided by high-throughput ultrahigh-performance liquid chromatography time-of-flight mass spectrometry analyses of all fractions. The processing of all liquid chromatography-mass spectrometry data in the form of an medium-performance liquid chromatography x ultra high-performance liquid chromatography time-of-flight mass spectrometry matrix enabled an

  12. Design study and heat transfer analysis of a neutron converter target for medical radioisotope production

    International Nuclear Information System (INIS)

    Masoud Behzad; Sang-In Bak; Seung-Woo Hong; Jong-Seo Chai; Yacine Kadi; Claudio Tenreiro; University of Talca, Talca

    2014-01-01

    A worldwide challenge in the near future will be to find a way of producing radioisotopes in sufficient quantity without relying on research reactors. The motivation for this innovative work on targets lies in the accelerator-based production of radioisotopes using a neutron converter target as in the transmutation by adiabatic resonance crossing concept. Thermal analysis of a multi-channel helium cooled device is performed with the computational fluid dynamics code CFX. Different boundary conditions are taken into account in the simulation process and many important parameters such as maximum allowable solid target temperature as well as uniform inlet velocity and outlet pressure changes in the channels are investigated. The results confirm that the cooling configuration works well; hence such a solid target could be operated safely and may be considered for a prototype target. (author)

  13. ATM Technology Adoption in U.S. Campus Networking.

    Science.gov (United States)

    Yao, Engui; Perry, John F.; Anderson, Larry S.; Brook, R. Dan; Hare, R. Dwight; Moore, Arnold J.; Xu, Xiaohe

    This study examined the relationships between ATM (asynchronous transfer mode) adoption in universities and four organizational variables: university size, type, finances, and information processing maturity. Another purpose of the study was to identify the current status of ATM adoption in campus networking. Subjects were university domain LAN…

  14. Effects of remedial measures on long term transfer of radiocaesium from soil to agricultural products as calculated from Swedish field experimental data

    International Nuclear Information System (INIS)

    Loensjoe, H.; Rosen, K.; Haak, E.

    1990-01-01

    Extensive studies on the transfer of radiocaesium from soil to agricultural products under long term field conditions have been performed in Sweden since 1961. Effects of various remedial measures to be taken after farm land contamination have been studied in long term microplot experiments, in ploughing experiments and in conventional field experiments in Chernobyl fallout areas. Furthermore, the transfer of radiocaesium in various farm ecosystems, as influenced by farm management practices and the line of production applied, has been calculated. Fertilization with potassium has been found to effectively reduce the transfer of radiocaesium from the soil to various crops. The best effects were found on peat and sandy soils in the Chernobyl fallout areas, where a reduction by a factor of 2-5 or more has been recorded. Also, on clay soils heavy K application was found to depress the Cs transfer appreciably. Placement of the nuclide below the normal ploughing depth reduced the Cs transfer by a factor of 2-3 as compared with the effect of a homogeneous distribution in the plough layer. With a combination of deep placement and K fertilization a reduction by a factor of 10 or more has been obtained. It seems possible to reduce the caesium transfer from soil to food by a factor of 5-10 by changing the line of production on a farm in various ways. (author). 12 refs, 5 tabs

  15. Thematic strategy on sustainable use of plant protection products. Prospects and requirements for transferring proposals for plant protection products to biocides

    Energy Technology Data Exchange (ETDEWEB)

    Gartiser, Stefan [Hydrotox GmbH, Freiburg im Breisgau (Germany); Lueskow, Heike [Institut fuer Oekologie und Politik GmbH (OEKOPOL), Hamburg (Germany); Gross, Rita [Oeko-Institut e.V. - Institut fuer Angewandte Oekologie e.V., Freiburg im Breisgau (Germany)

    2012-03-15

    The sustainable use of pesticides pursues, independent of the authorisation of single products, the aim to minimise existing environmental risks of pesticide use and therefore contribute to the reduction of its impact on the environmental protection goals. The Thematic Strategy (TS) and the Framework Directive 2009/128/EC (FWD) on sustainable use of pesticides have so far only been implemented for plant protection products (PPP). For biocides there exists no harmonised approach. Within the project the possibilities and requirements for transferring measures of the FWD to the biocide area have been analysed, with specific focus on wood preservatives, insecticides, and antifouling products. Several biocidal active substances are found in the outlets of sewage treatment plants and in surface water, but an inventory of the present environmental impact as well as reliable data on biocide consumption and use patterns, which could be used to identify key action areas, are generally missing. These data are urgently needed for the development of suitable indicators and the definition of the objectives. Sustainable use of biocides addresses the three issues; social, environmental and economic impact at which the ecological background assigns the borderline and beam barrier of the economic and social development. A systematic analysis of the instruments for improving sustainable use of pesticides described in TS and FWD indicated that many issues can be transferred to the biocide area. This concerns e.g. education and training, requirements for sales, the establishment of awareness programmes, control of the machinery for biocide application, the development of best practice standards based on integrated pest management principles, and the collection of statistics on biocide consumption. Some biocide specific characteristics need to be considered: E.g. unlike PPP, the intended use of some biocides is to be directly applied in water bodies or indoors. Furthermore for some

  16. Minimum entropy production closure of the photo-hydrodynamic equations for radiative heat transfer

    International Nuclear Information System (INIS)

    Christen, Thomas; Kassubek, Frank

    2009-01-01

    In the framework of a two-moment photo-hydrodynamic modelling of radiation transport, we introduce a concept for the determination of effective radiation transport coefficients based on the minimization of the local entropy production rate of radiation and (generally nongrey) matter. The method provides the nonequilibrium photon distribution from which the effective (variable) absorption coefficients and the variable Eddington factor (VEF) can be calculated. For a single band model, the photon distribution depends explicitly on the frequency dependence of the absorption coefficient. Without introducing artificial fit parameters, multi-group or multi-band concepts, our approach reproduces the exact results in both limits of optically thick (Rosseland mean) and optically thin (Planck mean) media, in contrast to the maximum entropy method. Also the results for general nonequilibrium radiation between the limits of diffusive and ballistic photons are reasonable. We conjecture that the reason for the success of our approach lies in the linearity of the underlying Boltzmann equation of the photon gas. The method is illustrated and discussed for grey matter and for a simple example of nongrey matter with a two-band absorption spectrum. The method is also briefly compared with the maximum entropy concept.

  17. Transfer of wastewater associated pharmaceuticals and personal care products to crop plants from biosolids treated soil.

    Science.gov (United States)

    Wu, Chenxi; Spongberg, Alison L; Witter, Jason D; Sridhar, B B Maruthi

    2012-11-01

    The plant uptake of emerging organic contaminants such as pharmaceuticals and personal care products (PPCPs) is receiving increased attention. Biosolids from municipal wastewater treatment have been previously identified as a major source for PPCPs. Thus, plant uptake of PPCPs from biosolids applied soils needs to be understood. In the present study, the uptake of carbamazepine, diphenhydramine, and triclocarban by five vegetable crop plants was examined in a field experiment. At the time of harvest, three compounds were detected in all plants grown in biosolids-treated soils. Calculated root concentration factor (RCF) and shoot concentration factor (SCF) are the highest for carbamazepine followed by triclocarban and diphenhydramine. Positive correlation between RCF and root lipid content was observed for carbamazepine but not for diphenhydramine and triclocarban. The results demonstrate the ability of crop plants to accumulate PPCPs from contaminated soils. The plant uptake processes of PPCPs are likely affected by their physico-chemical properties, and their interaction with soil. The difference uptake behavior between plant species could not solely be attributed to the root lipid content. Copyright © 2012 Elsevier Inc. All rights reserved.

  18. Evolution of adoption from Roman law to modern law

    Directory of Open Access Journals (Sweden)

    Kitanović Tanja

    2013-01-01

    Full Text Available The work is dedicated to the evolution of adoption practice from ancient Roman law to modern law. Adoption represents ancient social and legal practice which has during time changed manifestations and the causes it served. Adoption in ancient Rome served the interests of pater familias without biological posterity. Adoption practice benefited the continuance of families and the family cult of adopters, whose family lines, with no natural posterity, were threatened to become extinct. After the stagnation in the feudal epoch, adoption was reaffirmed in the bourgeois law. Civil codes in European countries, whose legal systems were built on the foundations of the ancient Roman legal tradition, originally favoured the interests of individuals with no biological children, who were granted to extend their families by adopting, and hence transfer their assets on the obtained heirs. After the wars in the 20th century, which led to a rapid increase in the number of parentless children, the concept of adoption was radically changed, so that since that time the adoption has primarily served the interests of the adopted children and the care for them in the adoptive families. Adoption becomes a form of a social, legal family protection of children without adequate parental care, and that is the most desirable form to provide for children, for the adoptee completely integrates with the adoptive family and takes the right of the born child, where the family environment provides and encourages the optimal mental and physical development of the child.

  19. Evaluation of fission-product gases in program GAPCON series and FREG-3 to estimate the gap heat transfer coefficient

    International Nuclear Information System (INIS)

    Ohki, Naohisa; Harayama, Yasuo; Takeda, Tsuneo; Izumi, Fumio.

    1977-12-01

    In safety evaluation of a fuel rod, estimation of the stored energy in the fuel rod is indispensable. For this estimation, the temperature distribution in the fuel rod is calculated. Most important in determination of the temperature distribution is the gap heat transfer coefficient (gap conductance) between pellet surface and cladding inner surface. Under fuel rod operating condition, the mixed gas in the gap is composed of He, Xe and Kr. He is initial seald gas. Xe and Kr are fission-product gases, of which the quantities depend on the fuel burn-up. In program GAPCON series (GAPCON and GAPCON-THERMAL-1 and -2) and FREG-3, these quantities are given as a function of the irradiation time, power rating and neutron flux in estimation of the thermal conductivity of the mixed gas. The methods of calculating the quantities of Xe and Kr in the programs have been examined. Input of the neutron flux which influences F.P. gas production rates is better than the determination from the fuel-rod power rating. (auth.)

  20. Comparison of full-sky polarization and radiance observations to radiative transfer simulations which employ AERONET products.

    Science.gov (United States)

    Pust, Nathan J; Dahlberg, Andrew R; Thomas, Michael J; Shaw, Joseph A

    2011-09-12

    Visible-band and near infrared polarization and radiance images measured with a ground-based full-sky polarimeter are compared against a successive orders of scattering (SOS) radiative transfer model for 2009 summer cloud-free days in Bozeman, Montana, USA. The polarimeter measures radiance and polarization in 10-nm bands centered at 450 nm, 490 nm, 530 nm, 630 nm, and 700 nm. AERONET products are used to represent aerosols in the SOS model, while MISR satellite BRF products are used for the surface reflectance. While model results generally agree well with observation, the simulated degree of polarization is typically higher than observed data. Potential sources of this difference may include cloud contamination and/or underestimation of the AERONET-retrieved aerosol real refractive index. Problems with the retrieved parameters are not unexpected given the low aerosol optical depth range (0.025 to 0.17 at 500 nm) during the study and the corresponding difficulties that these conditions pose to the AERONET inversion algorithm.

  1. Improving the quantity, quality and transparency of data used to derive radionuclide transfer parameters for animal products. 2. Cow milk.

    Science.gov (United States)

    Howard, B J; Wells, C; Barnett, C L; Howard, D C

    2017-02-01

    Under the International Atomic Energy Agency (IAEA) MODARIA (Modelling and Data for Radiological Impact Assessments) Programme, there has been an initiative to improve the derivation, provenance and transparency of transfer parameter values for radionuclides from feed to animal products that are for human consumption. A description of the revised MODARIA 2016 cow milk dataset is described in this paper. As previously reported for the MODARIA goat milk dataset, quality control has led to the discounting of some references used in IAEA's Technical Report Series (TRS) report 472 (IAEA, 2010). The number of Concentration Ratio (CR) values has been considerably increased by (i) the inclusion of more literature from agricultural studies which particularly enhanced the stable isotope data of both CR and F m and (ii) by estimating dry matter intake from assumed liveweight. In TRS 472, the data for cow milk were 714 transfer coefficient (F m ) values and 254 CR values describing 31 elements and 26 elements respectively. In the MODARIA 2016 cow milk dataset, F m and CR values are now reported for 43 elements based upon 825 data values for F m and 824 for CR. The MODARIA 2016 cow milk dataset F m values are within an order of magnitude of those reported in TRS 472. Slightly bigger changes are seen in the CR values, but the increase in size of the dataset creates greater confidence in them. Data gaps that still remain are identified for elements with isotopes relevant to radiation protection. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

  2. Calibration transfer of a Raman spectroscopic quantification method for the assessment of liquid detergent compositions between two at-line instruments installed at two liquid detergent production plants.

    Science.gov (United States)

    Brouckaert, D; Uyttersprot, J-S; Broeckx, W; De Beer, T

    2017-09-01

    Calibration transfer of partial least squares (PLS) quantification models is established between two Raman spectrometers located at two liquid detergent production plants. As full recalibration of existing calibration models is time-consuming, labour-intensive and costly, it is investigated whether the use of mathematical correction methods requiring only a handful of standardization samples can overcome the dissimilarities in spectral response observed between both measurement systems. Univariate and multivariate standardization approaches are investigated, ranging from simple slope/bias correction (SBC), local centring (LC) and single wavelength standardization (SWS) to more complex direct standardization (DS) and piecewise direct standardization (PDS). The results of these five calibration transfer methods are compared reciprocally, as well as with regard to a full recalibration. Four PLS quantification models, each predicting the concentration of one of the four main ingredients in the studied liquid detergent composition, are aimed at transferring. Accuracy profiles are established from the original and transferred quantification models for validation purposes. A reliable representation of the calibration models performance before and after transfer is thus established, based on β-expectation tolerance intervals. For each transferred model, it is investigated whether every future measurement that will be performed in routine will be close enough to the unknown true value of the sample. From this validation, it is concluded that instrument standardization is successful for three out of four investigated calibration models using multivariate (DS and PDS) transfer approaches. The fourth transferred PLS model could not be validated over the investigated concentration range, due to a lack of precision of the slave instrument. Comparing these transfer results to a full recalibration on the slave instrument allows comparison of the predictive power of both Raman

  3. analysis of adoption of agro-biotechnological innovations in pig

    African Journals Online (AJOL)

    Adinya photo

    farmers on adoption of new technologies in pig production has positive influence on output of improved ... number of factors among which include non-adoption of ... I. B. Adinya, Department of Agricultural Economics and Extension, Cross River University of Technology ... Theoretical framework on adoption behaviour of pig.

  4. Process of adoption communication openness in adoptive families: adopters’ perspective

    Directory of Open Access Journals (Sweden)

    Maria Acciaiuoli Barbosa-Ducharne

    2016-01-01

    Full Text Available Abstract Communication about adoption is a family interaction process which is more than the simple exchange of information. Adoption communication can be characterized in terms of the level of openness of family conversations regarding the child’s past and the degree of the family’s adoption social disclosure. The objective of this study is to explore the process of adoption communication openness in Portuguese adoptive families by identifying the impact of variables related to the adoption process, the adoptive parenting and the adoptee. One hundred twenty five parents of children aged 3 to 15, who were adopted on average 4 years ago, participated in this study. Data was collected during home visits using the Parents Adoption Process Interview. A cluster analysis identified three different groups of families according to the level of adoption communication openness within the family and outside. The findings also showed that the process of the adoption communication openness started when parents decided to adopt, developed in parent-child interaction and was susceptible to change under professional intervention. The relevance of training given to prospective adopters and of professional practice based on scientific evidence is highlighted.

  5. Technology transfer

    International Nuclear Information System (INIS)

    Boury, C.

    1986-01-01

    This paper emphasizes in the specific areas of design, engineering and component production. This paper presents what Framatome has to offer in these areas and its export oriented philosophy. Then, a typical example of this technology transfer philosophy is the collaboration with the South Korean firm, Korea Heavy Industries Corporation (KHIC) for the supply of KNU 9 and KNU 10 power stations

  6. Adopting preoperative fasting guidelines.

    Science.gov (United States)

    Anderson, Megan; Comrie, Rhonda

    2009-07-01

    In 1999, the American Society of Anesthesiologists adopted preoperative fasting guidelines to enhance the quality and efficiency of patient care. Guidelines suggest that healthy, non-pregnant patients should fast six hours from solids and two hours from liquids. Although these guidelines are in place, studies suggest that providers are still using the blanket statement "NPO after midnight" without regard to patient characteristics, the procedure, or the time of the procedure. Using theory to help change provider's beliefs may help make change more successful. Rogers' Theory of Diffusion of Innovations can assist in changing long-time practice by laying the groundwork for an analysis of the benefits and disadvantages of proposed changes, such as changes to fasting orders, while helping initiate local protocols instead of additional national guidelines.

  7. Open adoption: adoptive parents' reactions two decades later.

    Science.gov (United States)

    Siegel, Deborah H

    2013-01-01

    Unlike in the past, most adoption agencies today offer birth parents and adoptive parents the opportunity to share identifying information and have contact with each other. To understand the impacts of different open adoption arrangements, a qualitative descriptive study using a snowball sample of 44 adoptive parents throughout New England began in 1988. Every seven years these parents who adopted infants in open adoptions have participated in tape-recorded interviews to explore their evolving reactions to their open adoption experiences. This article reports the results of in-depth interviews with these parents now that their children have reached young adulthood. This longitudinal research illuminates how open adoptions change over the course of childhood and adolescence, parents' feelings about open adoption, challenges that emerge in their relationships with their children's birth families, how those challenges are managed and viewed, and parents' advice for others living with open adoption and for clinical social work practice and policy. Findings reveal that regardless of the type of openness, these adoptive parents generally feel positive about knowing the birth parents and having contact with them, are comfortable with open adoption, and see it serving the child's best interests.

  8. International Adoption: Issues of Acknowledgement of Adoption and Birth Culture.

    Science.gov (United States)

    Trolley, Barbara C.; And Others

    1995-01-01

    Families who adopt children internationally are faced with not only the acknowledgement of the adoption but also the recognition of the child's birth culture. Thirty-four families were surveyed to assess issues regarding the relevance, frequency, and means of acknowledgement of the adoption and of the birth culture. Findings suggest ways adoption…

  9. Evaluation of Closed Adult Nucleus Multiple Ovulation and Embryo Transfer and Conventional Progeny Testing Breeding Schemes for Milk Production from Crossbred Cattle in the Tropics

    NARCIS (Netherlands)

    Kosgey, I.S.; Kahi, A.K.; Arendonk, van J.A.M.

    2005-01-01

    The potential benefits of closed adult nucleus multiple ovulation and embryo transfer (MOET) and conventional progeny testing (CNS) schemes, and the logistics of their integration into large-scale continuous production of crossbred cattle were studied by deterministic simulation. The latter was

  10. Corrosion of ferritic steels by molten lithium: Influence of competing thermal gradient mass transfer and surface product reactions

    International Nuclear Information System (INIS)

    Tortorelli, P.F.

    1987-10-01

    An Fe-12Cr-1MoVW steel was exposed to thermally convective lithium for 6962 h. Results showed that the weight change profile of Fe-12Cr-1MoVW steel changed substantially as the maximum loop temperature was raised from 500 to 600 0 C. Furthermore, for a particular loop experiment, changes in the structure and composition of the exposed surfaces did not reflect typical thermal gradient mass transfer effects for all elements: the surface concentration of chromium was often a maximum at intermediate temperatures, while nickel (present at low concentrations in the starting material) tended to be transported to the coldest part of the loop. Such data were interpreted in terms of a qualitative model in which there are different dominant reactions or the various constituents of the ferritic steels (surface product formation involving nitrogen and/or carbon and solubility-driven elemental transport). This competition among different reactions is important in evaluating overall corrosion behavior and the effects of temperature. The overall corrosion rate of the 12Cr-1MoVW steel was relatively low when compared to that for austenitic stainless steel exposed under similar conditions

  11. Increasing the productivity of glycopeptides analysis by using higher-energy collision dissociation-accurate mass-product-dependent electron transfer dissociation.

    Science.gov (United States)

    Saba, Julian; Dutta, Sucharita; Hemenway, Eric; Viner, Rosa

    2012-01-01

    Currently, glycans are attracting attention from the scientific community as potential biomarkers or as posttranslational modifications (PTMs) of therapeutic proteins. However, structural characterization of glycoproteins and glycopeptides remains analytically challenging. Here, we report on the implementation of a novel acquisition strategy termed higher-energy collision dissociation-accurate mass-product-dependent electron transfer dissociation (HCD-PD-ETD) on a hybrid linear ion trap-orbitrap mass spectrometer. This acquisition strategy uses the complementary fragmentations of ETD and HCD for glycopeptides analysis in an intelligent fashion. Furthermore, the approach minimizes user input for optimizing instrumental parameters and enables straightforward detection of glycopeptides. ETD spectra are only acquired when glycan oxonium ions from MS/MS HCD are detected. The advantage of this approach is that it streamlines data analysis and improves dynamic range and duty cycle. Here, we present the benefits of HCD-PD-ETD relative to the traditional alternating HCD/ETD for a trainer set containing twelve-protein mixture with two glycoproteins: human serotransferrin, ovalbumin and contaminations of two other: bovine alpha 1 acid glycoprotein (bAGP) and bovine fetuin.

  12. Running continuous academic adoption programmes

    DEFF Research Database (Denmark)

    Nielsen, Tobias Alsted

    Running successful academic adoption programmes requires executive support, clear strategies, tactical resources and organisational agility. These two presentations will discuss the implementation of strategic academic adoption programs down to very concrete tool customisations to meet specific...

  13. Healthy Travel for International Adoptions

    Centers for Disease Control (CDC) Podcasts

    The number of international adoptions, many from developing countries, has doubled in the last 10 years. This podcast discusses ways adoptive families can protect their own health and the health of their new children.

  14. The Texas Adoption Project: adopted children and their intellectual resemblance to biological and adoptive parents.

    Science.gov (United States)

    Horn, J M

    1983-04-01

    Intelligence test scores were obtained from parents and children in 300 adoptive families and compared with similar measures available for the biological mothers of the same adopted children. Results supported the hypothesis that genetic variability is an important influence in the development of individual differences for intelligence. The most salient finding was that adopted children resemble their biological mothers more than they resemble the adoptive parents who reared them from birth. A small subset of the oldest adopted children did not resemble their biological mothers. The suggestion that the influence of genes declines with age is treated with caution since other adoption studies report a trend in the opposite direction.

  15. RAPK-7. code for calculating mass transfer and corrosion products activation in the circulation loops of water-cooled reactors

    International Nuclear Information System (INIS)

    Mikhaylov, A.V.; Moryakov, A.V.; Nikitin, A.V.

    2012-09-01

    The RAPK-7 code was developed to simulate formation of non-irradiated and activated corrosion products, their transport and deposition on inner surfaces of primary components and in primary coolant of water-cooled reactors during their operation on power and after shutdown. The key feature of this code is its particular emphasis on the contamination of circulation loops by radioactive corrosion products of reactor which operates on variable modes. Such reactors typically are: research reactors and their experimental loops, naval nuclear power systems, etc. It's typical for such reactors to have repeated (over the campaign) and frequent variations in power (activating neutron fluxes), thermal-physical, hydrodynamic and other parameters of coolant, intensive water mass exchange between the circulation loop and the pressuriser, etc. The processes of mass-transfer are described by the RAPK-7 code with the use of models similar to those employed by the COTRAN and PACTOLE codes. The circulation circuit is broken down into computation areas. The user will then set the concentrations of water chemistry adjusting additives (alkali, boric acid, ammonia, hydrogen), as well as parameters in each area, such as wall temperature, coolant flow core temperature, pressure, flow rate, velocity, the radial component of coolant flowrate and activating neutron flux density. All the above parameters can be set as time-dependent step functions (bar charts), with independent time steps for each of them. The number of computation areas, the number of time dependencies and the level of detail in their description are limited by computer capabilities only. A 'brake' mode with a single-step change of the required set of parameters is provided to allow for jump-type events, such as replacement of contaminated components with clean ones during core refueling or repairs, emergency injection of boric acid, water mass exchange between the circulation circuit and the pressuriser, etc

  16. Influence of zeolite pore structure on product selectivities for protolysis and hydride transfer reactions in the cracking of n-pentane.

    Science.gov (United States)

    Miyaji, Akimitsu; Iwase, Yasuyoshi; Nishitoba, Toshiki; Long, Nguyen Quang; Motokura, Ken; Baba, Toshihide

    2015-02-21

    The conversion of n-pentane was carried out to examine the effects of reaction conditions on changes in product selectivities at 823 K, using zeolites with 10- and 12-membered rings. We also investigated the influence of the pore structure of these zeolites on their catalytic activities for both protolysis and hydride transfer reactions. In the first half of this work, we examined the influence of acidic proton concentration and n-pentane pressure on the reaction rates for protolysis and hydride transfer reactions using ZSM-5 zeolites. The rates of hydride transfer reactions were more influenced by pentane pressure compared to protolysis reactions, and were proportional to the square of n-pentane pressure and the concentration of acidic protons. In the second half of this work, the influence of the zeolite pore structure on changes in product selectivities with n-pentane conversion and that on the rates of protolysis and the hydride transfer reactions were revealed using various zeolites with 10- and 12-membered rings. The catalytic activities of zeolites for the protolysis and hydride transfer reactions were influenced more by the spatial volume of the zeolite cavity than the acid strength of protons on the zeolite.

  17. Adoption research, practice, and societal trends: Ten years of progress.

    Science.gov (United States)

    Wiley, Mary O'Leary

    2017-12-01

    Adoption involves the legal transfer of parental rights and responsibilities from a child's birth parents to adults who will raise the child (Reitz & Watson, 1992). Research related to adoption has expanded over the past 10 years and has incorporated more focus on implications for practice and public policy. This expansion has reflected increased awareness of the lived experience of adopted individuals, in addition to that of adoptive families and birth or first parents and families, collectively known as the adoption kinship network (Grotevant & McRoy, 1998). Trends discussed included research and social trends or movements (2007-2017) since the publication of the final article in a series of articles in the psychological literature related to adoption in The Counseling Psychologist (Baden & Wiley, 2007; Lee, 2003; O'Brien & Zamostny, 2003; Wiley & Baden, 2005; Zamostny, O'Brien, Baden, & Wiley, 2003; Zamostny, Wiley, O'Brien, Lee, & Baden, 2003). This article summarizes the social trends and research related to adoption over the last 10 years, including longitudinal and meta-analytic studies, increased research and conceptualization of ethnic and racial identity development, research on microaggressions, and research on diverse adoptive families, including those with gay and lesbian parents. Social trends included increased knowledge related to Internet accessibility, genetic information, continued focus on openness, and viewing adoption through a more critical lens. Implications are discussed for the development of programs that enhance competence of mental health professionals and adoption professionals in adoption-competent practice. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  18. The Effect of Training on Productivity: The Transfer of On-the-Job Training from the Perspective of Economics

    Science.gov (United States)

    De Grip, Andries; Sauermann, Jan

    2013-01-01

    Although the transfer of on-the-job training to the workplace belongs to the realm of educational research, it is also highly related to labour economics. In the economic literature, the transfer of training is based on the theoretical framework of human capital theory and has been extensively analysed empirically in econometric studies that take…

  19. Adoption of nuclear power generation

    International Nuclear Information System (INIS)

    Sommers, P.

    1980-01-01

    This article develops a model of the innovation-adoption decision. The model allows the economic situation of a utility and its perception of uncertainty associated with an innovation to affect the probability of adopting it. This model is useful when uncertainties affecting decisions about adoption persist throughout the diffusion process, thereby making the usual adoption model implicit in rate-of-diffusion studies inappropriate. An empirical test of the model finds that firm size, power pool size, and selected aspects of uncertainty about the innovation are significant predictors of US utility companies' decisions on whether or not to adopt nuclear power generation. 17 references, 2 tables

  20. 27 CFR 5.28 - Adoption of predecessor's formulas.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Adoption of predecessor's formulas. 5.28 Section 5.28 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF DISTILLED SPIRITS Formulas § 5.28 Adoption of...

  1. determinants of contact farmers adoption of improved cassava

    African Journals Online (AJOL)

    iya beji

    ADP contact farmer's adoption of improved cassava production technologies in Imo. State of Nigeria under the Ecologically Sustainable Cassava production project ..... 120. Source: Computer Analysis of the Field Survey Data, 2003/2004. 18 ...

  2. Predicting Virtual Learning Environment Adoption

    DEFF Research Database (Denmark)

    Penjor, Sonam; Zander, Pär-Ola Mikael

    2016-01-01

    This study investigates the significance of Rogers’ Diffusion of Innovations (DOI) theory with regard to the use of a Virtual Learning Environment (VLE) at the Royal University of Bhutan (RUB). The focus is on different adoption types and characteristics of users. Rogers’ DOI theory is applied...... to investigate the influence of five predictors (relative advantage, complexity, compatibility, trialability and observability) and their significance in the perception of academic staff at the RUB in relation to the probability of VLE adoption. These predictors are attributes of the VLE that determine the rate...... of adoption by various adopter group memberships (Innovators, Early Adopters, Early Majority, Late Majority, Laggards). Descriptive statistics and regression analysis were deployed to analyse adopter group memberships and predictor significance in VLE adoption and use. The results revealed varying attitudes...

  3. Capacitación de productores y directivos para la adopción de tecnologías de producción animal sostenible Training of producers and management staff for the adoption of sustainable animal production technologies

    Directory of Open Access Journals (Sweden)

    A.R Mesa

    2009-03-01

    Full Text Available La capacitación del capital humano es altamente importante para la adopción de tecnologías sostenibles, pues exige tener una visión adecuada y los conocimientos necesarios para asegurar la sostenibilidad de los sistemas de producción agropecuaria, a través de un programa ajustado a sus necesidades productivas. El objetivo del presente trabajo fue determinar las necesidades de capacitación en siete UBPC. Estas fueron: 9 Caballerías, y El Zapato (de la Empresa Pecuaria Martí; Fé del Valle (Empresa Pecuaria Gusev; La Prueba (Empresa Genética de Matanzas, todas de la provincia de Matanzas; El Negrito (de la Empresa Pecuaria Cumanayagua, Aguadita (Empresa Pecuaria Rodas y Aguada (Empresa Pecuaria Aguada, pertenecientes a la provincia de Cienfuegos. Para visualizar la situación técnico-productiva y ambiental de las UBPC se utilizó la Metodología MARPS. La determinación de las necesidades de capacitación se realizó según los modelos de la andragogía, que se fundamentan en los diferentes procesos que operan en las entidades. El bienestar del ecosistema y el bienestar humano no sobrepasaron el 50%. A partir del análisis de la matriz FODA se elaboraron las estrategias de capacitación y se propusieron los diferentes temas, tales como: reproducción animal, agrotecnia de los pastos, manejo y alimentación animal, pues son los que definen el desarrollo de la UBPC, por lo que el cumplimiento de estas actividades de capacitación debe lograr impactos positivos en la producción agropecuaria.Training the human capital is extremely important for the adoption of sustainable technologies, because it demands having an adequate vision and the necessary knowledge to ensure the sustainability of animal production systems, through a program adjusted to their productive needs. The objective of this work was to determine the training needs in seven Basic Units of Cooperative Production (UBPC. They were: 9 Caballerías and El Zapato (from the Mart

  4. The Use of Video in Knowledge Transfer of Teacher-Led Psychosocial Interventions: Feeling Competent to Adopt a Different Role in the Classroom / L’utilisation de la vidéo dans le transfert de connaissances dans les interventions psychosociales

    Directory of Open Access Journals (Sweden)

    Caroline Beauregard

    2015-03-01

    Full Text Available Because they propose a form of modeling, videos have been recognised to be useful to transfer knowledge about practices requiring teachers to adopt a different role. This paper describes the results of a satisfaction survey with 98 teachers, school administrators and professionals regarding their appreciation of training videos showing teacher-led psychosocial interventions. The association between teachers’ appreciation of the video and their desire to implement the intervention are explored in terms of authenticity, vicarious learning and self-efficacy, in an attempt to further comprehend how the use of video supports different aspects of modeling (skills - know-how, attitudes - know-how to be. The authors suggest that training videos featuring teachers leading psychosocial interventions support knowledge transfer because learners can relate to successful peers and can think of themselves as competent to replicate the intervention and comfortable to adopt a different role in the classroom. Parce qu’elles proposent une forme de modelage, les vidéos ont été reconnues comme utiles pour le transfert de connaissances au sujet des pratiques exigeant que les enseignants jouent un rôle différent. Cet article décrit les résultats d’une enquête sur la satisfaction réalisée auprès de 98 enseignants, administrateurs et professionnels scolaires quant à leur appréciation des vidéos de formation montrant des interventions psychosociales menées par des enseignants. Le lien entre l’appréciation de la vidéo par les enseignants et leur désir de mettre en pratique l’intervention est exploré en matière d’authenticité, d’apprentissage par procuration et d’auto-efficacité, pour tenter de mieux comprendre comment l’usage de la vidéo appuie différents aspects du modelage (aptitudes, savoir-faire, attitudes, savoir-être. Les auteurs suggèrent que les vidéos de formation montrant des enseignants menant des interventions

  5. Accumulative charge separation for solar fuels production: coupling light-induced single electron transfer to multielectron catalysis.

    Science.gov (United States)

    Hammarström, Leif

    2015-03-17

    The conversion and storage of solar energy into a fuel holds promise to provide a significant part of the future renewable energy demand of our societies. Solar energy technologies today generate heat or electricity, while the large majority of our energy is used in the form of fuels. Direct conversion of solar energy to a fuel would satisfy our needs for storable energy on a large scale. Solar fuels can be generated by absorbing light and converting its energy to chemical energy by electron transfer leading to separation of electrons and holes. The electrons are used in the catalytic reduction of a cheap substrate with low energy content into a high-energy fuel. The holes are filled by oxidation of water, which is the only electron source available for large scale solar fuel production. Absorption of a single photon typically leads to separation of a single electron-hole pair. In contrast, fuel production and water oxidation are multielectron, multiproton reactions. Therefore, a system for direct solar fuel production must be able to accumulate the electrons and holes provided by the sequential absorption of several photons in order to complete the catalytic reactions. In this Account, the process is termed accumulative charge separation. This is considerably more complicated than charge separation on a single electron level and needs particular attention. Semiconductor materials and molecular dyes have for a long time been optimized for use in photovoltaic devices. Efforts are made to develop new systems for light harvesting and charge separation that are better optimized for solar fuel production than those used in the early devices presented so far. Significant progress has recently been made in the discovery and design of better homogeneous and heterogeneous catalysts for solar fuels and water oxidation. While the heterogeneous ones perform better today, molecular catalysts based on transition metal complexes offer much greater tunability of electronic and

  6. Heat transfer study on open heat exchangers used in jaggery production modules – Computational Fluid Dynamics simulation and field data assessment

    International Nuclear Information System (INIS)

    La Madrid, Raul; Marcelo, Daniel; Orbegoso, Elder Mendoza; Saavedra, Rafael

    2016-01-01

    Highlights: • Heat transfer modeling and simulation between flue gases and sugar cane juice. • Use of Computational Fluid Dynamics to get thermal parameters of a jaggery furnace. • Data acquisition system installed in the jaggery production module. • Parametric analysis changing the flue-gases velocity to represent temperature drops. - Abstract: Jaggery (also called organic sugar) is a concentrated product of sugarcane juice that is produced in rural communities in the highlands and jungle of Peru. In the last few years there has been an increase in the exports of jaggery and higher volumes of production are required driving this activity from a rural process with small production to an industry seeking greater productivity. In this framework, optimization of the use of energy becomes essential for the proper development of the process of production and the correct performance of the involved equipment. Open heat exchangers made of stainless steel are used in the production of jaggery. These heat exchangers containing sugarcane juice are placed over a flue gas duct. The thermal energy contained in the gas is used to evaporate the water contained in the sugarcane juice thickening the juice and after evaporating almost all the water, a pasty crystalline yellow substance is left in the boiling pan which becomes solid after cooling, this is the jaggery. The modeling and simulation of heat transfer between the combustion gases and the juice is very important in order to improve the thermal efficiency of the process. It permits to know with a high level of detail the physical phenomena of heat transfer occurring from bagasse combustion flue gases to sugarcane juice. This paper presents the results of the numerical simulation of heat transfer phenomena in the open heat exchangers and those results are compared to field measured data. Numerical results about temperature drop of flue gases in the several locations of the jaggery furnace are in good accordance with

  7. What drives the comparability effect of mandatory IFRS adoption?

    OpenAIRE

    Stefano Cascino; Joachim Gassen

    2015-01-01

    We investigate the effects of mandatory IFRS adoption on the comparability of financial accounting information. Using two comparability proxies based on De Franco et al. [2011] and a comparability proxy based on the degree of information transfer, our results suggest that the overall comparability effect of mandatory IFRS adoption is marginal. We hypothesize that firm-level heterogeneity in IFRS compliance explains the limited comparability effect. To test this conjecture, we first hand-colle...

  8. Adoption and Assisted Reproduction. Adoption and Ethics, Volume 4.

    Science.gov (United States)

    Freundlich, Madelyn

    The controversies in adoption have extended across a spectrum of policy and practice issues, and although the issues have become clear, resolution has not been achieved nor has consensus developed regarding a framework on which to improve the quality of adoption policy and practice. This book is the fourth in a series to use an ethics-based…

  9. effective feedback mechanism in the transfer and adoption of fish

    African Journals Online (AJOL)

    Institutes for Freshwater Fisheries Research New Bussa, Niger state to fish farmers in ... Focus Group Discussion (1.0), Trade fair/Agric show (0.9), workshop (1.3), seminar .... workshop (0.8), Internet services (1.0) and cell-phone (0.2).

  10. Determinants of Effective Information Transfer in International Regulatory Standards Adoption

    Science.gov (United States)

    Popescu, Denisa

    2010-01-01

    The role of international regulatory standards within the current global environment has become of the most importance. The age of the global system and free market capitalism carried us into the unprecedented age of regulations, and standard setting. Regulations are now becoming the emerging mode of global governance. This study focuses on…

  11. Effective feedback mechanism in the transfer and adoption of fish ...

    African Journals Online (AJOL)

    Journal of Agriculture and Social Research (JASR). Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 14, No 1 (2014) >. Log in or Register to get access to full text downloads.

  12. Adoptive transfer of immune enhancement of experimental ulcerative colitis.

    OpenAIRE

    Onderdonk, A B; Steeves, R M; Cisneros, R L; Bronson, R T

    1984-01-01

    Previous experiments with the carrageenan model for ulcerative colitis have shown that the inflammatory response in guinea pigs can be enhanced by immunization with and subsequent feeding of Bacteroides vulgatus to experimental animals. The present studies showed that only certain strains of B. vulgatus are capable of provoking immune enhancement of ulcerative colitis. Animals were fed carrageenan and various strains of viable B. vulgatus after immunization with a strain of B. vulgatus isolat...

  13. The adoption potential of biomass transfer and improved fallow ...

    African Journals Online (AJOL)

    Mo

    Analysis identified optimal combinations of organic and inorganic soil improvement ... associated required investments (capital, labour, and land) of the options within a farm ...... The authors would like to thank The Rockefeller Foundation.

  14. TRANSFERENCE BEFORE TRANSFERENCE.

    Science.gov (United States)

    Bonaminio, Vincenzo

    2017-10-01

    This paper is predominantly a clinical presentation that describes the transmigration of one patient's transference to another, with the analyst functioning as a sort of transponder. It involves an apparently accidental episode in which there was an unconscious intersection between two patients. The author's aim is to show how transference from one case may affect transference in another, a phenomenon the author calls transference before transference. The author believes that this idea may serve as a tool for understanding the unconscious work that takes place in the clinical situation. In a clinical example, the analyst finds himself caught up in an enactment involving two patients in which he becomes the medium of what happens in session. © 2017 The Psychoanalytic Quarterly, Inc.

  15. An experimental study of the transfer of radiocaesium from whole milk to a wide range of milk products produced by the Irish dairy industry

    International Nuclear Information System (INIS)

    McEnri, C.

    1990-07-01

    Milk and milk products constitute a substantial portion of the human diet and represent one of the principal means by which food-borne radionuclides are ingested. The Chernobyl accident and subsequent widespread contamination demonstrated clearly that the dairy industry is highly sensitive to air-borne pollution. In this thesis, the results of a project to study the transfer of radiocaesium from whole milk to a wide range of milk products manufactured by the Irish Dairy Industry are presented together with a review of the relevant literature

  16. 45,X product of conception after preimplantation genetic diagnosis and euploid embryo transfer: evidence of a spontaneous conception confirmed by DNA fingerprinting.

    Science.gov (United States)

    Bettio, Daniela; Capalbo, Antonio; Albani, Elena; Rienzi, Laura; Achille, Valentina; Venci, Anna; Ubaldi, Filippo Maria; Levi Setti, Paolo Emanuele

    2016-09-06

    Preimplantation genetic screening (PGS) provides an opportunity to eliminate a potential implantation failure due to aneuploidy in infertile couples. Some studies clearly show that twins following single embryo transfer (SET) can be the result of a concurrent natural conception and an incidence as high as 1 in 5 twins has been reported. In our case PGS was performed on trophectoderm (TE) biopsies by quantitative polymerase chain reaction (qPCR). The product of conception (POC) was cytogenetically investigated after selection of the placental villi by means of the direct method. Molecular cytogenetic characterization of the POC was performed by fluorescence in situ hybridization (FISH) and array-comparative genomic hybridization (a-CGH) analyses. To investigate the possibility of a spontaneous conception, a panel of 40 single nucleotide polymorphisms (SNPs) was used to compare genetic similarity between the DNA of the POC and the DNA leftover of the TE biopsy. We describe a 36-year old infertile woman undergoing PGS who had a spontaneous abortion after a single euploid embryo transfer on a spontaneous cycle. The POC showed a 45,X karyotype confirmed by FISH and a-CGH. DNA fingerprinting demonstrated a genetic similarity of 75 % between the DNA of the POC and TE biopsy, consistent with a sibling status. All supernumerary euploid embryos were also tested showing a non-self relationship with the POC, excluding a mix-up event at the time of fetal embryo transfer. DNA fingerprinting of the transferred blastocyst and POC, confirmed the occurrence of a spontaneous conception. This case challenges the assumption that a pregnancy after assisted reproductive technology (ART) is always a result of ART, and strengthens the importance to avoid intercourses during PGS and natural transfer cycles. Moreover, cytogenetic analysis of the POCs is strongly recommended along with fingerprinting children born after PGS to see what the concordance is between the embryo transferred and

  17. (SAGE): Adopt, adapt, or contextualise?

    African Journals Online (AJOL)

    and time-consuming and requires CPG knowledge ... Step 4. Consider whether to adopt, adapt or contextualise. Step 4.1 Adopt. Decide to .... review. PLoS One 2013;8:e82915. http://dx.doi.org/10.1371/journal.pone.0082915. 14. AGREE ...

  18. Healthy Travel for International Adoptions

    Centers for Disease Control (CDC) Podcasts

    2007-10-22

    The number of international adoptions, many from developing countries, has doubled in the last 10 years. This podcast discusses ways adoptive families can protect their own health and the health of their new children.  Created: 10/22/2007 by National Center for the Prevention, Detection and Control of Infectious Diseases (NCPDCID).   Date Released: 10/24/2007.

  19. Heat transfer characteristics evaluation of heat exchangers of mock-up test facility with full-scale reaction tube for HTTR hydrogen production system (Contract research)

    International Nuclear Information System (INIS)

    Shimizu, Akira; Ohashi, Hirofumi; Kato, Michio; Hayashi, Koji; Aita, Hideki; Nishihara, Tetsuo; Inaba, Yoshitomo; Takada, Shoji; Morisaki, Norihiro; Sakaki, Akihiro; Maeda, Yukimasa; Sato, Hiroyuki; Inagaki, Yoshiyuki; Hanawa, Hiromi; Fujisaki, Katsuo; Yonekawa, Hideo

    2005-06-01

    Connection of hydrogen production system by steam reforming of methane to the High Temperature Engineering Test Reactor (HTTR) of the Japan Atomic Energy Research Institute (JAERI) has been surveyed until now. Mock-up test facility of this steam reforming system with full-scale reaction tube was constructed in FY 2001 and hydrogen of 120 Nm 3 /h was successfully produced in overall performance test. Totally 7 times operational tests were performed from March 2002 to December 2004. A lot of operational test data on heat exchanges were obtained in these tests. In this report specifications and structures of steam reformer, steam superheater, steam generator, condenser, helium gas cooler, feed gas heater and feed gas superheater were described. Heat transfer correlation equations for inside and outside tube were chosen from references. Spreadsheet programs were newly made to evaluate heat transfer characteristics from measured test data such as inlet and outlet temperature pressure and flow-rate. Overall heat-transfer coefficients obtained from the experimental data were compared and evaluated with the calculated values with heat transfer correlation equation. As a result, actual measurement values of all heat exchangers gave close agreement with the calculated values with correlation equations. Thermal efficiencies of the heat exchangers were adequate as they were well accorded with design value. (author)

  20. A multivariate analysis of factors affecting adoption of improved ...

    African Journals Online (AJOL)

    This paper analyzes the synergies/tradeoffs involved in the adoption of improved varieties of multiple crops in the mixed crop-livestock production systems of the highlands of Ethiopia A multivariate probit (MVP) model involving a system of four equations for the adoption decision of improved varieties of barley, potatoes, ...

  1. Assessing the Role of Technology Adoption in China's Growth Performance

    DEFF Research Database (Denmark)

    Wirz, Nadja

    to what extent these productivity increases can be explained by technology-adoption theory. In less developed countries, the key element behind technological progress is technology adoption, the process of copying technological knowledge invented throughout the world. To uncover a measure of China...

  2. Radiative heat transfer

    CERN Document Server

    Modest, Michael F

    2013-01-01

    The third edition of Radiative Heat Transfer describes the basic physics of radiation heat transfer. The book provides models, methodologies, and calculations essential in solving research problems in a variety of industries, including solar and nuclear energy, nanotechnology, biomedical, and environmental. Every chapter of Radiative Heat Transfer offers uncluttered nomenclature, numerous worked examples, and a large number of problems-many based on real world situations-making it ideal for classroom use as well as for self-study. The book's 24 chapters cover the four major areas in the field: surface properties; surface transport; properties of participating media; and transfer through participating media. Within each chapter, all analytical methods are developed in substantial detail, and a number of examples show how the developed relations may be applied to practical problems. It is an extensive solution manual for adopting instructors. Features: most complete text in the field of radiative heat transfer;...

  3. Clinical Improvement by Switching to an Integrase Strand Transfer Inhibitor in Hemophiliac Patients with HIV: The Japan Cohort Study of HIV Patients Infected through Blood Products.

    Science.gov (United States)

    Kawado, Miyuki; Hashimoto, Shuji; Oka, Shin-Ichi; Fukutake, Katsuyuki; Higasa, Satoshi; Yatsuhashi, Hiroshi; Ogane, Miwa; Okamoto, Manabu; Shirasaka, Takuma

    2017-01-01

    This study aimed to determine improvement in HIV RNA levels and the CD4 cell count by switching to an antiretroviral regimen with an integrase strand transfer inhibitor (INSTI) in patients with HIV. This study was conducted on Japanese patients with HIV who were infected by blood products in the 1980s. Data were collected between 2007 and 2014. Data of 564 male hemophiliac patients with HIV from the Japan Cohort Study of HIV Patients Infected through Blood Products were available. Changes in antiretroviral regimen use, HIV RNA levels, and the CD4 cell count between 2007 and 2014 were examined. From 2007 to 2014, the proportion of use of a regimen with an INSTI increased from 0.0% to 41.0%. For patients with HIV who used a regimen, including an INSTI, the proportion of HIV RNA levels products. This suggests that performing this switch in clinical practice will lead to favorable effects.

  4. Effects of Temperature and Stirring on Mass Transfer to Maximize Biodiesel Production from Jatropha curcas Oil: A Mathematical Study

    Directory of Open Access Journals (Sweden)

    Fahad Al Basir

    2015-01-01

    Full Text Available Biodiesel, the most promising renewable and alternative energy, is produced through transesterification of vegetable oils. One of the most cost effective sources of biodiesel is Jatropha curcas oil. Transesterification of Jatropha oil depends significantly on reaction parameters such as reaction time, temperature, molar ratio, catalyst amount, and stirrer speed. Among these parameters temperature and stirring have noteworthy effect on mass transfer. In this research article, we have shown the simultaneous effect of temperature and stirring on mass transfer by considering a mathematical model. The optimal profiles of temperature and stirring are determined as a combined parameter, for which maximum biodiesel can be obtained. Further, we have shown that this pair exists and is unique for the optimality of the system.

  5. Multimodal Resources in Transnational Adoption

    DEFF Research Database (Denmark)

    Raudaskoski, Pirkko Liisa

    The paper discusses an empirical analysis which highlights the multimodal nature of identity construction. A documentary on transnational adoption provides real life incidents as research material. The incidents involve (or from them emerge) various kinds of multimodal resources and participants...

  6. Adopting the EURO in Romania

    Directory of Open Access Journals (Sweden)

    Ilie ŞIMON

    2011-03-01

    Full Text Available This paper addresses the adoption of the Euro currency in 2014, as estimated in the National Programme. Based on the convergence criteria analysis on the current national background, we can foresee an earlier monetary integration.

  7. The Role of Customer Engagement in Innovation Adoption

    Science.gov (United States)

    2012-12-01

    CUSTOMER ENGAGEMENT IN INNOVATION ADOPTION THESIS Presented to the Faculty Department of Systems and Engineering Management Graduate... customer and the solution provider should improve this knowledge transfer. It is, however, exceedingly difficult to measure this relationship , or the...to the problem-solution process. This research specifically investigated (1) the relationship between the level of interaction with the customer

  8. Risky business: target choice in adoptive cell therapy.

    Science.gov (United States)

    Morgan, Richard A

    2013-11-14

    In this issue of Blood, Casucci et al present an elegant study that describes a potential new target for adoptive cell transfer (ACT), in this case CD44 splice variant 6 (CD44v6), and detail why it may be a good target for ACT and how to manage expected off-tumor/on-target toxicities.

  9. Erabulenols, inhibitors of cholesteryl ester transfer protein produced by Penicillium sp. FO-5637. I.Production, isolation and biological properties.

    Science.gov (United States)

    Tomoda, H; Tabata, N; Masuma, R; Si, S Y; Omura, S

    1998-07-01

    Penicillium sp. FO-5637, a soil isolate, was found to produce a series of inhibitors of cholesteryl ester transfer protein (CETP). Novel active compounds, designated erabulenols A and B, were isolated from the fermentation broth of the producing strain by solvent extraction, ODS column chromatography and HPLC. Erabulenols A and B inhibit human CETP activity with IC50 values of 47.7 and 58.2 microM in an in vitro assay system containing 200 microM BSA, respectively.

  10. Adopting Internet Banking in Ghana

    OpenAIRE

    G.O. Ofori-Dwumfuo; Betty A. Dankwah

    2013-01-01

    This study looks at the benefits, challenges and barriers in adopting Internet banking at a major bank in Ghana. The development of the Internet is changing the way financial services are provided in Ghana. The Internet banking facility has resulted in new ways of delivering banking services. The research is a case study based on the staffs that has worked with the bank for more than three years. In evaluating benefits, challenges and barriers to the bank in adopting Internet banking, intervi...

  11. Adopt, Adapt, Enact or Use?

    OpenAIRE

    Lauterbach , Jens; Mueller , Benjamin

    2014-01-01

    Part 1: IS/IT Implementation and Appropriation; International audience; Information Systems (IS) are omnipresent in today’s organizations. While much research has been performed on adoption, implementation, and use of IS, still many practitioners are faced with IS change endeavors in organizations that equal “death march” projects and fail before or directly after go-live. Research with a positivist stance has thoroughly studied factors that describe individuals’ intentions to adopt or use te...

  12. Factors in Agile Methods Adoption

    Directory of Open Access Journals (Sweden)

    Samia Abdalhamid

    2017-05-01

    Full Text Available There are many factors that can affect the process of adopting Agile methods during software developing. This paper illustrates the critical factors in Agile methods adoption in software organizations. To present the success and failure factors, an exploratory study is carried out among the critical factors of success and failure from existing studies. Dimensions and Factors are introduced utilizing success and failure dimensions. The mind map was used to clarify these factors.

  13. The Baryon Production and Baryon Number Transfer in Hadron-Hadron, Hadron-Nucleus and Nucleus-Nucleus Collisions

    International Nuclear Information System (INIS)

    Szymanski, P.

    2006-09-01

    This work concerns soft hadronic interactions which in the Standard Model carry most of the observable cross-section but are not amenable to quantitative predictions due to the very nature of the QCD (Theory of Strong Interactions). In the low momentum transfer region the evolving coupling constant caused perturbation theory to break down. In this situation better experimental understanding of the physics phenomena is needed. One aspect of the soft hadronic interactions will be discussed in this work: transfer of the baryon number from the initial to the final state of the interaction. The past experimental knowledge on this process is presented, reasons for its unsatisfactory status are discussed and condition necessary for improvement are outlined: that is experimental apparatus with superior performance over the full range of available interactions: hadron-hadron collision, hadron-nucleus and nucleus-nucleus interactions. A consistent model-independent picture of the baryon number transfer process emerging from the data on the full range of interactions is shown. It offers serious challenge to theory to provide quantitative and detailed explanation of the measurements. (author)

  14. The Value of Successful MBSE Adoption

    Science.gov (United States)

    Parrott, Edith

    2016-01-01

    The value of successful adoption of Model Based System Engineering (MBSE) practices is hard to quantify. Most engineers and project managers look at the success in terms of cost. But there are other ways to quantify the value of MBSE and the steps necessary to achieve adoption. The Glenn Research Center (GRC) has been doing Model-Based Engineering (design, structural, etc.) for years, but the system engineering side has not. Since 2010, GRC has been moving from documents centric to MBSE/SysML. Project adoption of MBSE has been slow, but is steadily increasing in both MBSE usage and complexity of generated products. Sharing of knowledge of lessons learned in the implementation of MBSE/SysML is key for others who want to be successful. Along with GRC's implementation, NASA is working hard to increase the successful implementation of MBSE across all the other centers by developing guidelines, templates and libraries for projects to utilize. This presentation will provide insight into recent GRC and NASA adoption efforts, lessons learned and best practices.

  15. Theoretical study on production of heavy neutron-rich isotopes around the N=126 shell closure in radioactive beam induced transfer reactions

    Directory of Open Access Journals (Sweden)

    Long Zhu

    2017-04-01

    Full Text Available In order to produce more unknown neutron-rich nuclei around N=126, the transfer reactions 136Xe + 198Pt, 136–144Xe + 208Pb, and 132Sn + 208Pb are investigated within the framework of the dinuclear system (DNS model. The influence of neutron excess of projectile on production cross sections of target-like products is studied through the reactions 136,144Xe + 208Pb. We find that the radioactive projectile 144Xe with much larger neutron excess is favorable to produce neutron-rich nuclei with charge number less than the target rather than produce transtarget nuclei. The incident energy dependence of yield distributions of fragments in the reaction 132Sn + 208Pb are also studied. The production cross sections of neutron-rich nuclei with Z=72–77 are predicted in the reactions 136–144Xe + 208Pb and 132Sn + 208Pb. It is noticed that the production cross sections of unknown neutron-rich nuclei in the reaction 144Xe + 208Pb are at least two orders of magnitude larger than those in the reaction 136Xe + 208Pb. The radioactive beam induced transfer reactions 139,144Xe + 208Pb, considering beam intensities proposed in SPIRAL2 (Production System of Radioactive Ion and Acceleration On-Line project as well, for production of neutron-rich nuclei around the N=126 shell closure are investigated for the first time. It is found that, in comparison to the stable beam 136Xe, the radioactive beam 144Xe shows great advantages for producing neutron-rich nuclei with N=126 and the advantages get more obvious for producing nuclei with less charge number.

  16. Influence of Marketing on Consumer's Adoption of E-Banking

    Directory of Open Access Journals (Sweden)

    MSc. Ganimete Podvorica

    2014-02-01

    Full Text Available The financial system plays an extraordinary role in developing and enriching the domestic economy. E-banking service as an innovative software product and service for customers was introduced few years ago in the country from variety of national and international banks: ProCredit Bank, Raiffeissen Bank, Teb Bank, NLB Bank etc., enabling consumers to have access to their bank accounts over the internet. Since internet usage grows rapidly in the country even adoption of e-banking is expected to flourish. Behavior of customers toward adoption is explained using different behavioral model. The objective of this study is to analyze the consumer-adoption process toward e-banking. The survey is used in this respect, to find out the way they learn, try, and adopt or reject e-banking service. Furthermore, the hypothesis those females are significantly different from males on adoption of e-banking services, it prevails the null hypothesis that gender doesn’t affect adoption of e-banking services. The study reveals the characteristics of the consumers toward ebanking adoption process, such as differences in individual readiness to try new product; the information searching; advertisement and direct marketing influence; and speed rates of adoption and non adoption among genders.

  17. Oxidative dissolution of ADOPT compared to standard UO2 fuel

    International Nuclear Information System (INIS)

    Nilsson, Kristina; Roth, Olivia; Jonsson, Mats

    2017-01-01

    In this work we have studied oxidative dissolution of pure UO 2 and ADOPT (UO 2 doped with Al and Cr) pellets using H 2 O 2 and gammaradiolysis to induce the process. There is a small but significant difference in the oxidative dissolution rate of UO 2 and ADOPT pellets, respectively. However, the difference in oxidative dissolution yield is insignificant. Leaching experiments were also performed on in-reactor irradiated ADOPT and UO 2 pellets under oxidizing conditions. The results indicate that the U(VI) release is slightly slower from the ADOPT pellet compared to the UO 2. This could be attributed to differences in exposed surface area. However, fission products with low UO 2 solubility display a higher relative release from ADOPT fuel compared to standard UO 2 -fuel. This is attributed to a lower matrix solubility imposed by the dopants in ADOPT fuel. The release of Cs is higher from UO 2 which is attributed to the larger grain size of ADOPT. - Highlights: •Oxidative dissolution of ADOPT fuel is compared to standard UO 2 fuel. •Only marginal differences are observed. •The main difference observed is in the relative release rate of fission products. •Differences are claimed to be attributed to a lower matrix solubility imposed by the dopants in ADOPT fuel.

  18. Facilitating Transfers

    DEFF Research Database (Denmark)

    Kjær, Poul F.

    to specific logics of temporalisation and spatial expansion of a diverse set of social processes in relation to, for example, the economy, politics, science and the mass media. On this background, the paper will more concretely develop a conceptual framework for classifying different contextual orders...... that the essential functional and normative purpose of regulatory governance is to facilitate, stabilise and justify the transfer of condensed social components (such as economic capital and products, political decisions, legal judgements, religious beliefs and scientific knowledge) from one social contexts...

  19. The determinants for the adoption of compost from household waste ...

    African Journals Online (AJOL)

    ... compost from household waste for crop production by farmers living nearby Yaoundé, ... International Journal of Biological and Chemical Sciences ... The descriptive results show that 14 factors mostly affect the compost adoption by farmers.

  20. analysis of socio-economic factors influencing farmers' adoption

    African Journals Online (AJOL)

    Ifedotun Aina

    Key words: Improved maize production practices, adoption, socio-economic, ... The Federal Ministry of Science and Technology (2004) reported that Nigeria has a ... status, educational level and household size of the maize farmers were ...

  1. Factors influencing the adoption of mobile financial services in the ...

    African Journals Online (AJOL)

    user

    the basis for product or service development, pricing, marketing and policy formulation. In this study we ... Key words: Mobile financial services, Adoption, Tanzania ...... Financial Inclusion Strategies Referenca Framework. Washington DC: ...

  2. Adoption of agricultural innovations through non-traditional financial ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Adoption of agricultural innovations through non-traditional financial services ... donors, banks, and financial institutions to explore new kinds of financial services to ... enterprises, and others in the production process to connect with markets.

  3. Timing of adoption of clean technologies by regulated monopolies

    Directory of Open Access Journals (Sweden)

    Youssef Slim Ben

    2015-01-01

    Full Text Available We consider a monopoly firm producing a good and, at the same time, polluting and using fossil energy. By incurring an investment cost, this firm can adopt a lower production cost clean technology using renewable energy. We determine the optimal adoption date for the firm in the case where it is not regulated at all and in the case where it is regulated at each period. Interestingly, the regulated firm adopts the clean technology earlier than what is socially optimal, as opposed to the nonregulated firm. The regulator can induce the firm to adopt the clean technology at the socially optimal date by a postpone adoption subsidy. Nevertheless, the regulator may be interested in the earlier adoption of the firm to encourage the diffusion of the use of clean technologies in other industries.

  4. Randomised controlled trial of a livestock productive asset transfer programme to improve economic and health outcomes and reduce intimate partner violence in a postconflict setting.

    Science.gov (United States)

    Glass, Nancy; Perrin, Nancy A; Kohli, Anjalee; Campbell, Jacquelyn; Remy, Mitima Mpanano

    2017-01-01

    Diverse economic empowerment programmes (eg, microcredit, village-led savings and loan, cash and productive asset transfers) for the poor have demonstrated mixed results as vehicles for improved economic stability, health and women's empowerment. However, limited rigorous evaluations exist on the impact of financial and non-financial outcomes of these programmes, especially in conflict-affected areas. The team evaluated the effectiveness of an innovative livestock productive asset transfer intervention-Pigs for Peace (PFP)-on economic, health and women's empowerment outcomes with participants in households in 10 villages in Eastern Democratic Republic of Congo. Residual change analysis was used to examine the amount of change from baseline to 18 months between the intervention and delayed control groups, controlling for baseline scores. The majority of the 833 household participants were women (84%), 25 years of age or older, married, had on average 3 children and had never attended school. At 18 months postbaseline, the number of participants in the PFP households having outstanding credit/loans was 24.7% lower than households in the control group (p=0.028), and they had an 8.2% greater improvement in subjective health (p=0.026), a 57.1% greater reduction in symptoms of anxiety (p=0.020) and a 5.7% greater improvement in symptoms of post-traumatic stress disorder (p<-0.001). At 18 months postbaseline, partnered women and men reported a reduction in experience and perpetration of all forms of intimate partner violence, although not statistically significant between groups. The findings support scalability of a livestock productive asset transfer programme in rural and conflict-affected settings where residents have extremely limited access to financial institutions or credit programmes, health or social services and where social norms that sustain gender inequality are strong. NCT02008708.

  5. TIBSO - A program system for the calculation of the production, transfer, life cycle and radiation of radionuclides in a compound nuclear reactor system

    International Nuclear Information System (INIS)

    Vertes, P.

    1977-10-01

    The goal of the program system TIBSO is the calculation of production, transfer, cumulation and filtration of radio isotopes in the cooling system of an atomic power plant. There is no restriction on the complexity of the cooling system, only the linearity and the time independence of technological parameters are assumed. The report contains the description of the basic idea of the method, the solution of the set of linear equations to be used and the description of the internal library files developed. (D.P.)

  6. Constraints in the adoption of Indigenous farming practices

    OpenAIRE

    K Kanagasabapathi; V Sakthivel

    2017-01-01

    Indigenous farming is a production system, based on renewal of ecological processes and strengthening of ecological functions of farm ecosystem to produce safe, healthy and sustainable food. Indigenous agriculture is being adopted by the farmers of Kolli Hills in centre Tamil Nadu for different reasons. However, a lot of constraints prevent the farmers in adopting indigenous farming practices, that include poor yield, poor marketing facilities, higher production cost and urbanization

  7. Constraints in the adoption of Indigenous farming practices

    Directory of Open Access Journals (Sweden)

    K Kanagasabapathi

    2017-09-01

    Full Text Available Indigenous farming is a production system, based on renewal of ecological processes and strengthening of ecological functions of farm ecosystem to produce safe, healthy and sustainable food. Indigenous agriculture is being adopted by the farmers of Kolli Hills in centre Tamil Nadu for different reasons. However, a lot of constraints prevent the farmers in adopting indigenous farming practices, that include poor yield, poor marketing facilities, higher production cost and urbanization

  8. Copper transfer from Cu-Aβ to human serum albumin inhibits aggregation, radical production and reduces Aβ toxicity

    DEFF Research Database (Denmark)

    Perrone, Lorena; Mothes, Emmanuelle; Vignes, Maeva

    2010-01-01

    the catalytic HO· production in vitro and ROS production in neuroblastoma cells generated by Cu-Aβ and ascorbate, 4) HSA and DAHK were able to rescue these cells from the toxicity of Cu-Aβ with ascorbate, 5) DAHK was more potent in ROS suppression and restoration of neuroblastoma cell viability than HSA...

  9. Oxygen transfer rate during the production of alginate by Azotobacter vinelandii under oxygen-limited and non oxygen-limited conditions

    Directory of Open Access Journals (Sweden)

    Peña Carlos F

    2011-02-01

    Full Text Available Abstract Background The oxygen transfer rate (OTR and dissolved oxygen tension (DOT play an important role in determining alginate production and its composition; however, no systematic study has been reported about the independent influence of the OTR and DOT. In this paper, we report a study about alginate production and the evolution of the molecular mass of the polymer produced by a wild-type A. vinelandii strain ATCC 9046, in terms of the maximum oxygen transfer rate (OTRmax in cultures where the dissolved oxygen tension (DOT was kept constant. Results The results revealed that in the two dissolved oxygen conditions evaluated, strictly controlled by gas blending at 0.5 and 5% DOT, an increase in the agitation rate (from 300 to 700 rpm caused a significant increase in the OTRmax (from 17 to 100 mmol L-1 h-1 for DOT of 5% and from 6 to 70 mmol L-1 h-1 for DOT of 0.5%. This increase in the OTRmax improved alginate production, as well as the specific alginate production rate (SAPR, reaching a maximal alginate concentration of 3.1 g L-1 and a SAPR of 0.031 g alg g biom-1 h-1 in the cultures at OTRmax of 100 mmol L-1 h-1. In contrast, the mean molecular mass (MMM of the alginate isolated from cultures developed under non-oxygen limited conditions increased by decreasing the OTRmax, reaching a maximal of 550 kDa at an OTRmax of 17 mmol L-1 h-1 . However, in the cultures developed under oxygen limitation (0.5% DOT, the MMM of the polymer was practically the same (around 200 kDa at 300 and 700 rpm, and this remained constant throughout the cultivation. Conclusions Overall, our results showed that under oxygen-limited and non oxygen-limited conditions, alginate production and its molecular mass are linked to the OTRmax, independently of the DOT of the culture.

  10. Adoption of innovations with contrarian agents and repentance

    Science.gov (United States)

    Gordon, Mirta B.; Laguna, M. F.; Gonçalves, S.; Iglesias, J. R.

    2017-11-01

    The dynamics of adoption of innovations is an important subject in many fields and areas, like technological development, industrial processes, social behavior, fashion or marketing. The number of adopters of a new technology generally increases following a kind of logistic function. However, empirical data provide evidences that this behavior may be more complex, as many factors influence the decision to adopt an innovation. On the one hand, although some individuals are inclined to adopt an innovation if many people do the same, there are others who act in the opposite direction, trying to differentiate from the ;herd;. People who prefer to behave like the others are called mimetic, whereas individuals who resist adopting new products, the stronger the greater the number of adopters, are named contrarians. Besides, in the real world new adopters may have second thoughts and change their decisions accordingly. In this contribution we include this possibility by means of repentance, a feature which was absent in previous models. The model of adoption of an innovation has all the ingredients of a previous version, in which the agents decision to adopt depends on the appeal of the novelty, the inertia or resistance to adopt it, and the social interactions with other agents, but now agents can repent and turn back to the old technology. We present analytic calculations and numerical simulations to determine the conditions for the establishment of the new technology. The inclusion of repentance can modify the balance between the global incentive to adopt and the number of contrarians who prevent full adoption, generating a rich landscape of temporal evolution that includes cycles of adoption.

  11. Transfer coefficients of selected radionuclides to animal products. I. Comparison of milk and meat from dairy cows and goats

    International Nuclear Information System (INIS)

    Johnson, J.E.; Ward, G.M.; Ennis, M.E. Jr.; Boamah, K.N.

    1988-01-01

    The diet-milk transfer coefficient, Fm (Bq L-1 output in milk divided by Bq d-1 intake to the animal) was studied for eight radionuclides that previously had been given little attention. The Fm values for cows and goats, respectively, were: 2.3 x 10(-5) and 1.5 x 10(-4) for /sup 99m/Tc, 1.4 x 10(-4) and 8.5 x 10(-4) for /sup 95m/Tc, 1.1 x 10(-2) for 99 Tc (goats only); 1.7 x 10(-3) and 9 x 10(-3) for 99 Mo; 4.8 x 10(-4) and 4.4 x 10(-3) for /sup 123m/Te; 4.8 x 10(-4) and 4.6 x 10(-3) for 133 Ba; 5.5 x 10(-7) and 5.5 x 10(-6) for 95 Zr; and 4.1 x 10(-7) and 6.4 x 10(-6) for 95 Nb. The goat/cow transfer coefficient ratios for milk were approximately 10, but the goat/cow ratios for meat varied by three orders of magnitude

  12. Technology transfer of oil-in-water emulsion adjuvant manufacturing for pandemic influenza vaccine production in Romania.

    Science.gov (United States)

    Fox, Christopher B; Huynh, Chuong; O'Hara, Michael K; Onu, Adrian

    2013-03-15

    Many developing countries lack or have inadequate pandemic influenza vaccine manufacturing capacity. In the 2009 H1N1 pandemic, this led to delayed and inadequate vaccine coverage in the developing world. Thus, bolstering developing country influenza vaccine manufacturing capacity is urgently needed. The Cantacuzino Institute in Bucharest, Romania has been producing seasonal influenza vaccine since the 1970s, and has the capacity to produce ∼5 million doses of monovalent vaccine in the event of an influenza pandemic. Inclusion of an adjuvant in the vaccine could enable antigen dose sparing, expanding vaccine coverage and potentially allowing universal vaccination of the Romanian population and possibly neighboring countries. However, adjuvant formulation and manufacturing know-how are difficult to access. This manuscript describes the successful transfer of oil-in-water emulsion adjuvant manufacturing and quality control technologies from the Infectious Disease Research Institute in Seattle, USA to the Cantacuzino Institute. By describing the challenges and accomplishments of the project, it is hoped that the knowledge and experience gained will benefit other institutes involved in similar technology transfer projects designed to facilitate increased vaccine manufacturing capacity in developing countries. Copyright © 2012 Elsevier Ltd. All rights reserved.

  13. Application of EoEP principle with variable heat transfer coefficient in minimizing entropy production in heat exchangers

    International Nuclear Information System (INIS)

    Balkan, F.

    2005-01-01

    A more realistic application of the entropy minimization principle EoEP is presented. This principle dictates uniform local entropy generations along the heat exchanger in order to minimize the total entropy generation rate due only to heat transfer. For a certain heat duty and area of an existing exchanger, this is done by changing the temperatures of one fluid while the temperatures of the other fluid are held constant. Since the heat duty is fixed, the change in the temperatures of the fluid after the change, however, may sometimes cause a drastic change in its flow rate. This may cause considerable changes in the overall heat transfer coefficient (U) and, consequently, in the entropy generation rate. Depending on the choice of the fluid for changing, the new entropy generation rates may be higher or lower than those based on constant U as is the case in papers recently published. So, the classical application of the EoEP principle needs to be modified to achieve more realistic entropy generation rates. In this study, the principle of EoEP with variable U is applied to some cases of heat exchange, and a simple method is presented as a criterion for the proper choice of the fluid to be changed

  14. Model for transfer of cesium and strontium to domestic animal products as a consequence of accidental deposition on ground

    International Nuclear Information System (INIS)

    Suolanen, V.

    1994-02-01

    In the study the contamination of domestic animal products (milk, beef, pork) and grain is predicted applying a compartment model approach to simulate the dynamic behaviour of radionuclides in the biosphere after an accidental atmospheric deposition. Further, the radionuclide intakes into human body by consumption of the contaminated domestic animal products and the arising internal doses, are studied. The contamination of domestic animal products and grain are predicted by considering three representative deposition cases. The considered deposition timepoints are: spring (1st of May), summer (1st of July) and autumn (1st of September). The nuclides considered are 137 Cs, 134 Cs and 90 Sr. (18 refs., 14 figs., 8 tabs.)

  15. Effective technology transfer through regional information teams

    International Nuclear Information System (INIS)

    Wicks, D.E.; Gahan, B.; Hoyle, G.

    1997-01-01

    Communication and the transfer of technical information is critical to the international gas industry. The technical research results developed through Gas Research Institute's natural gas supply program have been disseminated through a number of vehicles. Two primary vehicles are GRI's Information Centers and Regional Technology Transfer Agents (RTTA). The Information Centers serve as repositories for GRI information as well as provide no-cost literature searching expertise. The RTTAs actively communicate and interface with area producers, introducing potential technology adopters with GRI technology managers and/or the appropriate licensed product or service distributors. The combination of Information Centers and RTTAs continues to help independent producers break through the barriers of technology and accelerate the benefits of lower cost natural gas recovery. (au)

  16. Technology transfer, a two-way street

    International Nuclear Information System (INIS)

    Martin, H.L.

    1994-01-01

    Technology transfer through the Pollution Prevention ampersand Control Conferences, which have been cosponsored by the Environmental Protection Agency and by the professional societies of industry, greatly improved the environmental projects of the Department of Energy at Savannah River Site (SRS) in the mid-1980's. Those technologies, used in the liquid effluent treatment of the metal finishing liquid effluents from aluminum cleaning and nickel plating of fuel and targets for the nuclear production reactors, have been enhanced by the research and development of SRS engineers and scientists. The technology transfer has now become a two-way street to the benefit of our Nation's environment as these enhancements are being adopted in the metal finishing industry. These success stories are examples of the achievements anticipated in the 1990's as technology development in the federal facilities is shared with commercial industry

  17. Personality disorders in adopted versus non-adopted adults.

    Science.gov (United States)

    Westermeyer, Joseph; Yoon, Gihyun; Amundson, Carla; Warwick, Marion; Kuskowski, Michael A

    2015-04-30

    The goal of this epidemiological study was to investigate lifetime history and odds ratios of personality disorders in adopted and non-adopted adults using a nationally representative sample. Data, drawn from the National Epidemiological Survey on Alcohol and Related Conditions (NESARC), were compared in adopted (n=378) versus non-adopted (n=42,503) adults to estimate the odds of seven personality disorders using logistic regression analyses. The seven personality disorders were histrionic, antisocial, avoidant, paranoid, schizoid, obsessive-compulsive, and dependent personality disorder. Adoptees had a 1.81-fold increase in the odds of any personality disorder compared with non-adoptees. Adoptees had increased odds of histrionic, antisocial, avoidant, paranoid, schizoid, and obsessive-compulsive personality disorder compared with non-adoptees. Two risk factors associated with lifetime history of a personality disorder in adoptees compared to non-adoptees were (1) being in the age cohort 18-29 years (but no difference in the age 30-44 cohort), using the age 45 or older cohort as the reference and (2) having 12 years of education (but no difference in higher education groups), using the 0-11 years of education as the reference. These findings support the higher rates of personality disorders among adoptees compared to non-adoptees. Published by Elsevier Ireland Ltd.

  18. Adopting Internet Standards for Orbital Use

    Science.gov (United States)

    Wood, Lloyd; Ivancic, William; da Silva Curiel, Alex; Jackson, Chris; Stewart, Dave; Shell, Dave; Hodgson, Dave

    2005-01-01

    After a year of testing and demonstrating a Cisco mobile access router intended for terrestrial use onboard the low-Earth-orbiting UK-DMC satellite as part of a larger merged ground/space IP-based internetwork, we reflect on and discuss the benefits and drawbacks of integration and standards reuse for small satellite missions. Benefits include ease of operation and the ability to leverage existing systems and infrastructure designed for general use, as well as reuse of existing, known, and well-understood security and operational models. Drawbacks include cases where integration work was needed to bridge the gaps in assumptions between different systems, and where performance considerations outweighed the benefits of reuse of pre-existing file transfer protocols. We find similarities with the terrestrial IP networks whose technologies we have adopted and also some significant differences in operational models and assumptions that must be considered.

  19. Re an Adoption Application (Surrogacy)

    Science.gov (United States)

    1987-03-02

    In England, it is illegal under the Adoption Act 1958 to pay or reward anyone in an effort to adopt a child. A family court was asked in this case whether a surrogacy arrangement involving the payment of 5,000 pounds violated the Act. The applicants, a husband and wife, were unable to have children and had entered into an informal arrangement with a woman who agreed to engage in sexual intercourse with the husband and bear a child for the couple in exchange for 10,000 pounds. Because the surrogate wrote a book about her experience from which she made money, and sincerely wanted to help out the childless couple, she accepted only half of her fee. Convinced that the surrogate arrangement was not commercial in nature, the court found no violation of English law, authorized the payment to the mother, and authorized adoption of the child by the father and his wife.

  20. Adopting to Agile Software Development

    Directory of Open Access Journals (Sweden)

    Linkevics Gusts

    2014-12-01

    Full Text Available Agile software development can be made successful, but there is no well-defined way how to achieve this. The problem is that the successful adoption of agile methods and practices is a complex process and this process should be customizable for a particular organization or a team. This research focuses on identification of agile methods and practices. Result of the research is the ranking of agile methods, practices and their usage trends. As some terms of agile software development are interpreted differently in different organizations and teams, terminology used is analyzed. Results of the research can be used as a reference material for those who are planning to adopt agile methods or are looking for the next agile practice to implement. Results will be used for the development of an expert system to support agile adoption.