Heat production and storage are positively correlated with measures of body size/composition and heart rate drift during vigorous running.

Science.gov (United States)

Buresh, Robert; Berg, Kris; Noble, John

2005-09-01

The purposes of this study were to determine the relationships between: (a) measures of body size/composition and heat production/storage, and (b) heat production/storage and heart rate (HR) drift during running at 95% of the velocity that elicited lactate threshold, which was determined for 20 healthy recreational male runners. Subsequently, changes in skin and tympanic temperatures associated with a vigorous 20-min run, HR, and VO2 data were recorded. It was found that heat production was significantly correlated with body mass (r = .687), lean mass (r = .749), and body surface area (BSA, r = .699). Heat storage was significantly correlated with body mass (r = .519), fat mass (r = .464), and BSA (r = .498). The percentage of produced heat stored was significantly correlated with body mass (r = .427), fat mass (r = .455), and BSA (r = .414). Regression analysis showed that the sum of body mass, percentage of body fat, BSA, lean mass, and fat mass accounted for 30% of the variability in heat storage. It was also found that HR drift was significantly correlated with heat storage (r = .383), percentage of produced heat stored (r = .433), and core temperature change (r = .450). It was concluded that heavier runners experienced greater heat production, heat storage, and core temperature increases than lighter runners during vigorous running.

Production measurements at LHCb

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00392425

2017-01-01

The $\\text{LHC}b$ detector, with its excellent momentum resolution and flexible trigger strategy, is ideally suited for measuring heavy quark and quarkonia production properties. In addition, the new system of forward shower counters installed upstream and downstream has begun to be used, therefore the experiment is being suited to measure central exclusive production. The $\\text{LHC}b$ measurements of inclusive and differential cross-sections of the production of $J/\\psi$ resonance and $J/\\psi$ pairs, as well bottom quarks and $Z^0$ boson, based on Run 2 datasets are summarized. Finally, results on the prompt production of open charm hadrons and the exclusive production of charmonium are discussed.

A regulatory adjustment process for the determination of the optimal percentage requirement in an electricity market with Tradable Green Certificates

International Nuclear Information System (INIS)

Currier, Kevin M.

2013-01-01

A system of Tradable Green Certificates (TGCs) is a market-based subsidy scheme designed to promote electricity generation from renewable energy sources such as wind power. Under a TGC system, the principal policy instrument is the “percentage requirement,” which stipulates the percentage of total electricity production (“green” plus “black”) that must be obtained from renewable sources. In this paper, we propose a regulatory adjustment process that a regulator can employ to determine the socially optimal percentage requirement, explicitly accounting for environmental damages resulting from black electricity generation. - Highlights: • A Tradable Green Certificate (TGC) system promotes energy production from renewable sources. • We consider an electricity oligopoly operated under a TGC system. • Welfare analysis must account for damages from “black” electricity production. • We characterize the welfare maximizing (optimal) “percentage requirement.” • We present a regulatory adjustment process that computes the optimal percentage requirement iteratively

Total and Lower Extremity Lean Mass Percentage Positively Correlates With Jump Performance.

Science.gov (United States)

Stephenson, Mitchell L; Smith, Derek T; Heinbaugh, Erika M; Moynes, Rebecca C; Rockey, Shawn S; Thomas, Joi J; Dai, Boyi

2015-08-01

Strength and power have been identified as valuable components in both athletic performance and daily function. A major component of strength and power is the muscle mass, which can be assessed with dual-energy x-ray absorptiometry (DXA). The primary purpose of this study was to quantify the relationship between total body lean mass percentage (TBLM%) and lower extremity lean mass percentage (LELM%) and lower extremity force/power production during a countermovement jump (CMJ) in a general population. Researchers performed a DXA analysis on 40 younger participants aged 18-35 years, 28 middle-aged participants aged 36-55 years, and 34 older participants aged 56-75 years. Participants performed 3 CMJ on force platforms. Correlations revealed significant and strong relationships between TBLM% and LELM% compared with CMJ normalized peak vertical ground reaction force (p lean mass percentages. The findings have implications in including DXA-assessed lean mass percentage as a component for evaluating lower extremity strength and power. A paired DXA analysis and CMJ jump test may be useful for identifying neuromuscular deficits that limit performance.

Percentage Energy from Fat Screener: Overview

Science.gov (United States)

A short assessment instrument to estimate an individual's usual intake of percentage energy from fat. The foods asked about on the instrument were selected because they were the most important predictors of variability in percentage energy.

Comparison of Percentage of Syllables Stuttered With Parent-Reported Severity Ratings as a Primary Outcome Measure in Clinical Trials of Early Stuttering Treatment.

Science.gov (United States)

Onslow, Mark; Jones, Mark; O'Brian, Sue; Packman, Ann; Menzies, Ross; Lowe, Robyn; Arnott, Simone; Bridgman, Kate; de Sonneville, Caroline; Franken, Marie-Christine

2018-04-17

This report investigates whether parent-reported stuttering severity ratings (SRs) provide similar estimates of effect size as percentage of syllables stuttered (%SS) for randomized trials of early stuttering treatment with preschool children. Data sets from 3 randomized controlled trials of an early stuttering intervention were selected for analyses. Analyses included median changes and 95% confidence intervals per treatment group, Bland-Altman plots, analysis of covariance, and Spearman rho correlations. Both SRs and %SS showed large effect sizes from pretreatment to follow-up, although correlations between the 2 measures were moderate at best. Absolute agreement between the 2 measures improved as percentage reduction of stuttering frequency and severity increased, probably due to innate measurement limitations for participants with low baseline severity. Analysis of covariance for the 3 trials showed consistent results. There is no statistical reason to favor %SS over parent-reported stuttering SRs as primary outcomes for clinical trials of early stuttering treatment. However, there are logistical reasons to favor parent-reported stuttering SRs. We conclude that parent-reported rating of the child's typical stuttering severity for the week or month prior to each assessment is a justifiable alternative to %SS as a primary outcome measure in clinical trials of early stuttering treatment.

Making Sense of Fractions and Percentages

Science.gov (United States)

Whitin, David J.; Whitin, Phyllis

2012-01-01

Because fractions and percentages can be difficult for children to grasp, connecting them whenever possible is beneficial. Linking them can foster representational fluency as children simultaneously see the part-whole relationship expressed numerically (as a fraction and as a percentage) and visually (as a pie chart). NCTM advocates these…

Validation of calculated tissue maximum ratio obtained from measured percentage depth dose (PPD) data for high energy photon beam ( 6 MV and 15 MV)

International Nuclear Information System (INIS)

Osei, J.E.

2014-07-01

During external beam radiotherapy treatments, high doses are delivered to the cancerous cell. Accuracy and precision of dose delivery are primary requirements for effective and efficiency in treatment. This leads to the consideration of treatment parameters such as percentage depth dose (PDD), tissue air ratio (TAR) and tissue phantom ratio (TPR), which show the dose distribution in the patient. Nevertheless, tissue air ratio (TAR) for treatment time calculation, calls for the need to measure in-air-dose rate. For lower energies, measurement is not a problem but for higher energies, in-air measurement is not attainable due to the large build-up material required for the measurement. Tissue maximum ratio (TMR) is the quantity required to replace tissue air ratio (TAR) for high energy photon beam. It is known that tissue maximum ratio (TMR) is an important dosimetric function in radiotherapy treatment. As the calculation methods used to determine tissue maximum ratio (TMR) from percentage depth dose (PDD) were derived by considering the differences between TMR and PDD such as geometry and field size, where phantom scatter or peak scatter factors are used to correct dosimetric variation due to field size difference. The purpose of this study is to examine the accuracy of calculated tissue maximum ratio (TMR) data with measured TMR values for 6 MV and 15 MV photon beam at Sweden Ghana Medical Centre. With the help of the Blue motorize water phantom and the Omni pro-Accept software, Pdd values from which TMRs are calculated were measured at 100 cm source-to-surface distance (SSD) for various square field sizes from 5x5 cm to 40x40 cm and depth of 1.5 cm to 25 cm for 6 MV and 15 MV x-ray beam. With the same field sizes, depths and energies, the TMR values were measured. The validity of the calculated data was determined by making a comparison with values measured experimentally at some selected field sizes and depths. The results show that; the reference depth of maximum

Measurement of infarct size and percentage myocardium infarcted in a dog preparation with single photon-emission computed tomography, thallium-201, and indium 111-monoclonal antimyosin Fab

International Nuclear Information System (INIS)

Johnson, L.L.; Lerrick, K.S.; Coromilas, J.

1987-01-01

Single photon-emission tomography (SPECT) and indium 111-labeled monoclonal antimyosin Fab fragments were used to measure myocardial infarct size in 12 dogs, six subjected to balloon catheter-induced coronary artery occlusion for 6 hr (late reperfusion) and six subjected to occlusion with reperfusion at 2 hr (early reperfusion). Tomographic imaging was performed 24 hr after the intravenous injection of labeled Fab fragments with the use of a dual-head SPECT camera with medium-energy collimators. Immediately after the first tomographic scan, thallium-201 was injected into nine of 12 dogs and imaging was repeated. Estimated infarct size in grams was calculated from transaxially reconstructed, normalized, and background-corrected indium SPECT images with the use of a threshold technique for edge detection. Estimated noninfarcted myocardium in grams was calculated from obliquely reconstructed thallium SPECT images by a similar method. The animals were killed and infarct size in grams and true infarct size as a percentage of total left ventricular myocardial volume were measured by triphenyl tetrazolium chloride staining. Estimated infarct size from indium SPECT images showed an excellent correlation with true infarct size (r = .95, SEE = 4.1 g). Estimated percentage myocardium infarcted was calculated by dividing estimated infarct size from indium images by the sum of estimated infarct size plus estimated noninfarcted myocardium obtained from thallium images. Correlation between the estimated percentage of myocardium infarcted and true percentage of myocardium infarcted was excellent

Measuring Clinical Productivity.

Science.gov (United States)

Hudson, Mark E; Lebovitz, Evan E

2018-06-01

Productivity measurements have been used to evaluate and compare physicians and physician practices. Anesthesiology is unique in that factors outside anesthesiologist control impact opportunity for revenue generation and make comparisons between providers and facilities challenging. This article uses data from the multicenter University of Pittsburgh Physicians Department of Anesthesiology to demonstrate factors influencing productivity opportunity by surgical facility, between department divisions and subspecialties within multispecialty divisions, and by individuals within divisions. The complexities of benchmarking anesthesiology productivity are demonstrated, and the potential value of creating a productivity profile for facilities and groups is illustrated. Copyright © 2018 Elsevier Inc. All rights reserved.

PREDICTED PERCENTAGE DISSATISFIED (PPD) MODEL ...

African Journals Online (AJOL)

HOD

their low power requirements, are relatively cheap and are environment friendly. ... PREDICTED PERCENTAGE DISSATISFIED MODEL EVALUATION OF EVAPORATIVE COOLING ... The performance of direct evaporative coolers is a.

Alternatives to accuracy and bias metrics based on percentage errors for radiation belt modeling applications

Energy Technology Data Exchange (ETDEWEB)

Morley, Steven Karl [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-07-01

This report reviews existing literature describing forecast accuracy metrics, concentrating on those based on relative errors and percentage errors. We then review how the most common of these metrics, the mean absolute percentage error (MAPE), has been applied in recent radiation belt modeling literature. Finally, we describe metrics based on the ratios of predicted to observed values (the accuracy ratio) that address the drawbacks inherent in using MAPE. Specifically, we define and recommend the median log accuracy ratio as a measure of bias and the median symmetric accuracy as a measure of accuracy.

Top quark production cross-section measurements

CERN Document Server

Chen, Ye; The ATLAS collaboration

2017-01-01

Measurements of the inclusive and differential cross-sections for top-quark pair and single top production cross sections in proton-proton collisions with the ATLAS detector at the Large Hadron Collider are presented at center-of-mass energies of 8 TeV and 13 TeV. The inclusive measurements reach high precision and are compared to the best available theoretical calculations. These measurements, including results using boosted tops, probe our understanding of top-pair production in the TeV regime. The results are compared to Monte Carlo generators implementing LO and NLO matrix elements matched with parton showers and NLO QCD calculations. For the t-channel single top measurement, the single top-quark and anti-top-quark total production cross-sections, their ratio, as well as differential cross sections are also presented. A measurement of the production cross-section of a single top quark in association with a W boson, the second largest single-top production mode, is also presented. Finally, measurements of ...

Measuring healthcare productivity - from unit to system level.

Science.gov (United States)

Kämäräinen, Vesa Johannes; Peltokorpi, Antti; Torkki, Paulus; Tallbacka, Kaj

2016-04-18

Purpose - Healthcare productivity is a growing issue in most Western countries where healthcare expenditure is rapidly increasing. Therefore, accurate productivity metrics are essential to avoid sub-optimization within a healthcare system. The purpose of this paper is to focus on healthcare production system productivity measurement. Design/methodology/approach - Traditionally, healthcare productivity has been studied and measured independently at the unit, organization and system level. Suggesting that productivity measurement should be done in different levels, while simultaneously linking productivity measurement to incentives, this study presents the challenges of productivity measurement at the different levels. The study introduces different methods to measure productivity in healthcare. In addition, it provides background information on the methods used to measure productivity and the parameters used in these methods. A pilot investigation of productivity measurement is used to illustrate the challenges of measurement, to test the developed measures and to prove the practical information for managers. Findings - The study introduces different approaches and methods to measure productivity in healthcare. Practical implications - A pilot investigation of productivity measurement is used to illustrate the challenges of measurement, to test the developed measures and to prove the practical benefits for managers. Originality/value - The authors focus on the measurement of the whole healthcare production system and try to avoid sub-optimization. Additionally considering an individual patient approach, productivity measurement is examined at the unit level, the organizational level and the system level.

Percentage of Fast-Track Receipts

Data.gov (United States)

Social Security Administration — The dataset provides the percentage of fast-track receipts by state during the reporting fiscal year. Fast-tracked cases consist of those cases identified as Quick...

Alternative indicators for measuring hospital productivity.

Science.gov (United States)

Serway, G D; Strum, D W; Haug, W F

1987-08-01

This article explores the premise that the appropriateness and usefulness of typical hospital productivity measures have been affected by three changes in delivery: Organizational restructuring and other definition and data source changes that make full-time equivalent employee (FTE) measurements ambiguous. Transition to prospective payment (diagnosis-related groups). Increase in capitation (prepaid, at risk) programs. The effects of these changes on productivity management indicate the need for alternative productivity indicators. Several productivity measures that complement these changes in internal operations and the external hospital business environment are presented. These are based on an analysis of four hospitals within a multihospital system, and an illustration and interpretation of an array of measures, based on ten months of actual data, is provided. In conclusion, the recommendation is made for hospital management to collect an expanded set of productivity measures and review them in light of changing expense and revenue management schemes inherent in new payment modes.

Estimating product-to-product variations in metal forming using force measurements

NARCIS (Netherlands)

Havinga, Gosse Tjipke; Van Den Boogaard, Ton

2017-01-01

The limits of production accuracy of metal forming processes can be stretched by the development of control systems for compensation of product-to-product variations. Such systems require the use of measurements from each semi-finished product. These measurements must be used to estimate the final

45 CFR 305.33 - Determination of applicable percentages based on performance levels.

Science.gov (United States)

2010-10-01

..., DEPARTMENT OF HEALTH AND HUMAN SERVICES PROGRAM PERFORMANCE MEASURES, STANDARDS, FINANCIAL INCENTIVES, AND PENALTIES § 305.33 Determination of applicable percentages based on performance levels. (a) A State's... performance levels. 305.33 Section 305.33 Public Welfare Regulations Relating to Public Welfare OFFICE OF...

The quark combination mechanism and the production percentages of excited baryons

International Nuclear Information System (INIS)

Wang Qun; Xie Qubing

1994-01-01

The authors derives a set of basic relations about octet, decuplet and Singlet baryon production weights under two principles in multiparticle production. From these relations, the give the origin of 'spin suppression' phenomenon, and successfully explain why the singlet baryons have high multiplicities

The Effects of Water Parameters on Monthly Seagrass Percentage Cover in Lawas, East Malaysia

Science.gov (United States)

Ahmad-Kamil, E. I.; Ramli, R.; Jaaman, S. A.; Bali, J.; Al-Obaidi, J. R.

2013-01-01

Seagrass is a valuable marine ecosystem engineer. However, seagrass population is declining worldwide. The lack of seagrass research in Malaysia raises questions about the status of seagrasses in the country. The seagrasses in Lawas, which is part of the coral-mangrove-seagrass complex, have never been studied in detail. In this study, we examine whether monthly changes of seagrass population in Lawas occurred. Data on estimates of seagrass percentage cover and water physicochemical parameters (pH, turbidity, salinity, temperature, and dissolved oxygen) were measured at 84 sampling stations established within the study area from June 2009 to May 2010. Meteorological data such as total rainfall, air temperature, and Southern Oscillation Index were also investigated. Our results showed that (i) the monthly changes of seagrass percentage cover are significant, (ii) the changes correlated significantly with turbidity measurements, and (iii) weather changes affected the seagrass populations. Our study indicates seagrass percentage increased during the El-Nino period. These results suggest that natural disturbances such as weather changes affect seagrass populations. Evaluation of land usage and measurements of other water physicochemical parameters (such as heavy metal, pesticides, and nutrients) should be considered to assess the health of seagrass ecosystem at the study area. PMID:24163635

Validation of Field Methods to Assess Body Fat Percentage in Elite Youth Soccer Players.

Science.gov (United States)

Munguia-Izquierdo, Diego; Suarez-Arrones, Luis; Di Salvo, Valter; Paredes-Hernandez, Victor; Alcazar, Julian; Ara, Ignacio; Kreider, Richard; Mendez-Villanueva, Alberto

2018-05-01

This study determined the most effective field method for quantifying body fat percentage in male elite youth soccer players and developed prediction equations based on anthropometric variables. Forty-four male elite-standard youth soccer players aged 16.3-18.0 years underwent body fat percentage assessments, including bioelectrical impedance analysis and the calculation of various skinfold-based prediction equations. Dual X-ray absorptiometry provided a criterion measure of body fat percentage. Correlation coefficients, bias, limits of agreement, and differences were used as validity measures, and regression analyses were used to develop soccer-specific prediction equations. The equations from Sarria et al. (1998) and Durnin & Rahaman (1967) reached very large correlations and the lowest biases, and they reached neither the practically worthwhile difference nor the substantial difference between methods. The new youth soccer-specific skinfold equation included a combination of triceps and supraspinale skinfolds. None of the practical methods compared in this study are adequate for estimating body fat percentage in male elite youth soccer players, except for the equations from Sarria et al. (1998) and Durnin & Rahaman (1967). The new youth soccer-specific equation calculated in this investigation is the only field method specifically developed and validated in elite male players, and it shows potentially good predictive power. © Georg Thieme Verlag KG Stuttgart · New York.

Maximizing percentage depletion in solid minerals

International Nuclear Information System (INIS)

Tripp, J.; Grove, H.D.; McGrath, M.

1982-01-01

This article develops a strategy for maximizing percentage depletion deductions when extracting uranium or other solid minerals. The goal is to avoid losing percentage depletion deductions by staying below the 50% limitation on taxable income from the property. The article is divided into two major sections. The first section is comprised of depletion calculations that illustrate the problem and corresponding solutions. The last section deals with the feasibility of applying the strategy and complying with the Internal Revenue Code and appropriate regulations. Three separate strategies or appropriate situations are developed and illustrated. 13 references, 3 figures, 7 tables

MEASURING PRODUCTIVITY OF SOFTWARE DEVELOPMENT TEAMS

Directory of Open Access Journals (Sweden)

Goparaju Purna Sudhakar

2012-02-01

Full Text Available This paper gives an exhaustive literature review of the techniques and models available tomeasure the productivity of software development teams. Definition of productivity, measuringindividual programmer’s productivity, and measuring software development team productivity arediscussed. Based on the literature review it was found that software productivity measurement canbe done using SLOC (Source Lines of Code, function points, use case points, object points, andfeature points. Secondary research findings indicate that the team size, response time, taskcomplexity, team climate and team cohesion have an impact on software development teamproductivity. List of factors affecting the software development team productivity are studied andreviewed.

Measuring and improving productivity in general radiology.

Science.gov (United States)

Wilt, Michelle A; Miranda, Rafael; Johnson, C Daniel; Love, Peggy Sue

2010-10-01

The aim of this study was to determine a method of measuring productivity among general radiographers in a moderate-sized hospital and to improve and sustain productivity within that work area. The average times needed to perform the 13 most common examinations were measured. Performance of the various examinations was tracked and multiplied by the time allocated per procedure; this measure was divided by the length of the work shift to determine productivity. Productivity measures were shared among the work group, and decisions to improve productivity (eg, whether to fill open positions) were made by group members. Average time spent per examination type was calculated (range, 10 minutes to 1 hour 16 minutes). At baseline (February 2008), group productivity was 50%. Productivity increased during the first year of monitoring and was sustained through November 2009 (productivity range, 57%-63%). Yearly savings from not filling open positions were estimated to be $174,000. Productivity in a general radiology work area can be measured. Consensus among the work group helped increase productivity and assess progress. This methodology, if widely adopted, could be standardized and used to compare productivity across departments and institutions. Copyright © 2010 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Combine body mass index and body fat percentage measures to improve the accuracy of obesity screening in young adults.

Science.gov (United States)

Hung, Shang-Ping; Chen, Ching-Yu; Guo, Fei-Ran; Chang, Ching-I; Jan, Chyi-Feng

Obesity screening among young adult groups is meaningful. Body mass index (BMI) is limited to discriminate between fat and lean mass. Asian young adult group tends to have lower BMI and higher body fat percentage (BFP) than other ethnic groups. Accuracy of obesity screening by commonly used BMI criteria is unclear in young Taiwanese population. A total of 894 young adults (447 males and 447 females) aged 20-26 were recruited. BMI, regional fat percentage and BFP determined by bioelectrical impedance analysis (BIA) were measured. BMI cutoff points were based on the criteria adopted by the Ministry of Health and Welfare in Taiwan. Cutoff points of low or high BFP were defined as 24% in men and 31.4% in women. Prevalence of BFP defining obesity was 14.8% in young men and 27.3% in young women. 23.2% of young men and only 8.3% of young women were classified to overweight or obesity categories according to the BMI criteria. Disagreement was noticed mainly among overweight males and normal weight females. 68.7% of BMI defining overweight young men had low BFP; however, 29.7% of young women of BMI defining normal group had high BFP. Up to 69.7% of young women with high BFP would be missed by BMI category only. Disagreement between BMI and BFP was significant among young adults, especially young women. We suggest combining BMI and BIA for obesity and overweight screening in Asian young adults. Copyright © 2016 Asia Oceania Association for the Study of Obesity. Published by Elsevier Ltd. All rights reserved.

b-Production measurements with ATLAS

International Nuclear Information System (INIS)

Robins, Simon

2001-01-01

The Large Hadron Collider at CERN will produce b-hadrons with unprecedentedly high statistics, and with a higher energy reach than any previous machine. The ATLAS detector will offer excellent acceptance and performance for b physics studies and will make high statistics measurements of b-quark production to probe QCD. ATLAS can contribute to an understanding of the large discrepancy seen between the QCD prediction and Tevatron cross-section measurements. Measurements will be made of the absolute and differential production cross-sections. Measurements of bb-bar correlations will be made to test the NLO contributions to the cross-section and to place limits on non-perturbative effects

A novel body circumferences-based estimation of percentage body fat.

Science.gov (United States)

Lahav, Yair; Epstein, Yoram; Kedem, Ron; Schermann, Haggai

2018-03-01

Anthropometric measures of body composition are often used for rapid and cost-effective estimation of percentage body fat (%BF) in field research, serial measurements and screening. Our aim was to develop a validated estimate of %BF for the general population, based on simple body circumferences measures. The study cohort consisted of two consecutive samples of health club members, designated as 'development' (n 476, 61 % men, 39 % women) and 'validation' (n 224, 50 % men, 50 % women) groups. All subjects underwent anthropometric measurements as part of their registration to a health club. Dual-energy X-ray absorptiometry (DEXA) scan was used as the 'gold standard' estimate of %BF. Linear regressions where used to construct the predictive equation (%BFcal). Bland-Altman statistics, Lin concordance coefficients and percentage of subjects falling within 5 % of %BF estimate by DEXA were used to evaluate accuracy and precision of the equation. The variance inflation factor was used to check multicollinearity. Two distinct equations were developed for men and women: %BFcal (men)=10·1-0·239H+0·8A-0·5N; %BFcal (women)=19·2-0·239H+0·8A-0·5N (H, height; A, abdomen; N, neck, all in cm). Bland-Altman differences were randomly distributed and showed no fixed bias. Lin concordance coefficients of %BFcal were 0·89 in men and 0·86 in women. About 79·5 % of %BF predictions in both sexes were within ±5 % of the DEXA value. The Durnin-Womersley skinfolds equation was less accurate in our study group for prediction of %BF than %BFcal. We conclude that %BFcal offers the advantage of obtaining a reliable estimate of %BF from simple measurements that require no sophisticated tools and only a minimal prior training and experience.

Estimating product-to-product variations in metal forming using force measurements

Science.gov (United States)

Havinga, Jos; van den Boogaard, Ton

2017-10-01

The limits of production accuracy of metal forming processes can be stretched by the development of control systems for compensation of product-to-product variations. Such systems require the use of measurements from each semi-finished product. These measurements must be used to estimate the final quality of each product. We propose to predict part of the product-to-product variations in multi-stage forming processes based on force measurements from previous process stages. The reasoning is that final product properties as well as process forces are expected to be correlated since they are both affected by material and process variation. In this study, an approach to construct a moving window process model based on historical data from the process is presented. These regression models can be built and updated in real-time during production. The approach is tested with data from a demonstrator process with cutting, deep drawing and bending stages. It is shown that part of the product-to-product variations in the process can be predicted with the developed process model.

7 CFR 982.41 - Free and restricted percentages.

Science.gov (United States)

2010-01-01

... percentages in effect at the end of the previous marketing year shall be applicable. [51 FR 29548, Aug. 19... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... WASHINGTON Order Regulating Handling Marketing Policy § 982.41 Free and restricted percentages. The free and...

Quantitative Analysis of the Effect of Iterative Reconstruction Using a Phantom: Determining the Appropriate Blending Percentage

Science.gov (United States)

Kim, Hyun Gi; Lee, Young Han; Choi, Jin-Young; Park, Mi-Suk; Kim, Myeong-Jin; Kim, Ki Whang

2015-01-01

Purpose To investigate the optimal blending percentage of adaptive statistical iterative reconstruction (ASIR) in a reduced radiation dose while preserving a degree of image quality and texture that is similar to that of standard-dose computed tomography (CT). Materials and Methods The CT performance phantom was scanned with standard and dose reduction protocols including reduced mAs or kVp. Image quality parameters including noise, spatial, and low-contrast resolution, as well as image texture, were quantitatively evaluated after applying various blending percentages of ASIR. The optimal blending percentage of ASIR that preserved image quality and texture compared to standard dose CT was investigated in each radiation dose reduction protocol. Results As the percentage of ASIR increased, noise and spatial-resolution decreased, whereas low-contrast resolution increased. In the texture analysis, an increasing percentage of ASIR resulted in an increase of angular second moment, inverse difference moment, and correlation and in a decrease of contrast and entropy. The 20% and 40% dose reduction protocols with 20% and 40% ASIR blending, respectively, resulted in an optimal quality of images with preservation of the image texture. Conclusion Blending the 40% ASIR to the 40% reduced tube-current product can maximize radiation dose reduction and preserve adequate image quality and texture. PMID:25510772

78 FR 33757 - Rural Determination and Financing Percentage

Science.gov (United States)

2013-06-05

... Agency for determining what percentage of a project is eligible for RUS financing if the Rural Percentage... defined as rural. As the Agency investigates financing options for projects owned by entities other than... inability to fund 100 percent of the financing needs of a given project has undermined the Agency's effort...

"Productivity performance measurement - follow-up"

DEFF Research Database (Denmark)

Kristensen, Troels

2008-01-01

The Danish Ministry of Health has published the third annual report on hospital productivity. This experience has contributed to policy goals becoming more detailed and ambitious. New policy goals are: to include hospital productivity measures at less aggregated levels, to include labour producti...... productivity and hospital psychiatric care, to provide web-based solutions that facilitate access to productivity data, and to develop new classifications of hospital levels related to structural reforms....

Performance Measurement in Global Product Development

DEFF Research Database (Denmark)

Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

2013-01-01

there is a requirement for the process to be monitored and measured relative to the business strategy of an organisation. It was found that performance measurement is a process that helps achieve sustainable business success, encouraging a learning culture within organisations. To this day, much of the research into how...... performance is measured has focussed on the process of product development. However, exploration of performance measurement related to global product development is relatively unexplored and a need for further research is evident. This paper contributes towards understanding how performance is measured...

DEXA measures of body fat percentage and acute phase proteins among breast cancer survivors: a Cross-Sectional Analysis

Directory of Open Access Journals (Sweden)

Dee Anne

2012-08-01

Full Text Available Abstract Background C-reactive protein (CRP and Serum amyloid A protein (SAA increases with systemic inflammation and are related to worse survival for breast cancer survivors. This study examines the association between percent body fat and SAA and CRP and the potential interaction with NSAID use and weight change. Methods Participants included 134 non-Hispanic white and Hispanic breast cancer survivors from the Health, Eating, Activity, and Lifestyle Study. Body fat percentage, measured with Dual Energy X-ray Absorptiometer (DEXA, and circulating levels of CRP and SAA were obtained 30 months after breast cancer diagnosis. Results Circulating concentrations of CRP and SAA were associated with increased adiposity as measured by DEXA after adjustment for age at 24-months, race/ethnicity, dietary energy intake, weight change, and NSAID use. Survivors with higher body fat ≥35% had significantly higher concentrations of CRP (2.01 mg/l vs. 0.85 mg/l and SAA (6.21 mg/l vs. 4.21 mg/l compared to non-obese (body fat  Conclusions Breast cancer survivors with higher body fat had higher mean concentrations of CRP and SAA than women with lower body fat. Further assessment of NSAID use and weight control in reducing circulating inflammatory markers among survivors may be worthwhile to investigate in randomized intervention trials as higher inflammatory markers are associated with worse survival.

Percentage Retail Mark-Ups

OpenAIRE

Thomas von Ungern-Sternberg

1999-01-01

A common assumption in the literature on the double marginalization problem is that the retailer can set his mark-up only in the second stage of the game after the producer has moved. To the extent that the sequence of moves is designed to reflect the relative bargaining power of the two parties it is just as plausible to let the retailer move first. Furthermore, retailers frequently calculate their selling prices by adding a percentage mark-up to their wholesale prices. This allows a retaile...

ATLAS measurements of vector boson production

CERN Document Server

Vittori, Camilla; The ATLAS collaboration

2016-01-01

Measurements of the Drell­Yan production of W and Z/gamma* bosons at the LHC provide a benchmark of our understanding of perturbative QCD and probe the proton structure in a unique way. The ATLAS collaboration has performed new high precision measurements at center­of­mass energies of 8 and 13 TeV. In the 8 TeV data, we present recent measurements in the di­lepton mass range up to the TeV scale, double­differentially in dilepton mass and rapidity(­separation). The measurements are compared to state­of­the­art calculations at NNLO in QCD and constrain the photon content of the proton. First precise inclusive measurements of W and Z production at 13 TeV are presented. W/Z and W charge ratios profit from a cancellation of experimental uncertainties. The angular distributions of the Drell­Yan lepton pairs around the Z­boson mass peak probe the underlying QCD dynamic of the Z­boson production mechanisms. We present a measurement of the complete set of angular coefficients describing these distributions...

Fixed target hadron production measurements

CERN Document Server

Panman, J

2009-01-01

The knowledge of light hadron production cross-sections in proton-nucleus interactions is an important prerequisite to the analysis of a wide variety of experiments. One of the important limiting factors for the precision of accelerator based and atmospheric neutrino oscillation experiments is the uncertainty in the composition and spectrum of the neutrino flux. Cosmic-ray experiments detecting extensive air-showers can greatly improve their ability to interpret the data when precise hadron production spectra are available over a large range of energies. Dedicated hadron production experiments have been taking data recently and are now publishing their results. Other experiments have just started their data-taking and plan to supply measurements which can significantly extend the kinematic range in which data will be available. Early measurements at the LHC can extend this range to much higher energies than available up to now. Recent results will be shown and compared with hadronic production models. An outl...

Measurement of Ozone Production Sensor

Directory of Open Access Journals (Sweden)

M. Cazorla

2010-05-01

Full Text Available A new ambient air monitor, the Measurement of Ozone Production Sensor (MOPS, measures directly the rate of ozone production in the atmosphere. The sensor consists of two 11.3 L environmental chambers made of UV-transmitting Teflon film, a unit to convert NO₂ to O₃, and a modified ozone monitor. In the sample chamber, flowing ambient air is exposed to the sunlight so that ozone is produced just as it is in the atmosphere. In the second chamber, called the reference chamber, a UV-blocking film over the Teflon film prevents ozone formation but allows other processes to occur as they do in the sample chamber. The air flows that exit the two chambers are sampled by an ozone monitor operating in differential mode so that the difference between the two ozone signals, divided by the exposure time in the chambers, gives the ozone production rate. High-efficiency conversion of NO₂ to O₃ prior to detection in the ozone monitor accounts for differences in the NO_x photostationary state that can occur in the two chambers. The MOPS measures the ozone production rate, but with the addition of NO to the sampled air flow, the MOPS can be used to study the sensitivity of ozone production to NO. Preliminary studies with the MOPS on the campus of the Pennsylvania State University show the potential of this new technique.

Measuring multifactor productivity growth

Czech Academy of Sciences Publication Activity Database

Wölfl, A.; Hájková, Dana

-, 2007/5 (2007), s. 1-45 Institutional research plan: CEZ:AV0Z70850503 Keywords : multifactor productivity growth * GDP growth * measuring Subject RIV: AH - Economics http://www.oecd.org/dataoecd/61/17/39522985.pdf

Coral Reef Coverage Percentage on Binor Paiton-Probolinggo Seashore

Directory of Open Access Journals (Sweden)

Dwi Budi Wiyanto

2016-01-01

Full Text Available The coral reef damage in Probolinggo region was expected to be caused by several factors. The first one comes from its society that exploits fishery by using cyanide toxin and bomb. The second one goes to the extraction of coral reef, which is used as decoration or construction materials. The other factor is likely caused by the existence of large industry on the seashore, such as Electric Steam Power Plant (PLTU Paiton and others alike. Related to the development of coral reef ecosystem, availability of an accurate data is crucially needed to support the manner of future policy, so the research of coral reef coverage percentage needs to be conducted continuously. The aim of this research is to collect biological data of coral reef and to identify coral reef coverage percentage in the effort of constructing coral reef condition basic data on Binor, Paiton, and Probolinggo regency seashore. The method used in this research is Line Intercept Transect (LIT method. LIT method is a method that used to decide benthic community on coral reef based on percentage growth, and to take note of benthic quantity along transect line. Percentage of living coral coverage in 3 meters depth on this Binor Paiton seashore that may be categorized in a good condition is 57,65%. While the rest are dead coral that is only 1,45%, other life form in 23,2%, and non-life form in 17,7%. A good condition of coral reef is caused by coral reef transplantation on the seashore, so this coral reef is dominated by Acropora Branching. On the other hand, Mortality Index (IM of coral reef resulted in 24,5%. The result from observation and calculation of coral reef is dominated by Hard Coral in Acropora Branching (ACB with coral reef coverage percentage of 39%, Coral Massive (CM with coral reef coverage percentage of 2,85%, Coral Foliose (CF with coral reef coverage percentage of 1,6%, and Coral Mushroom (CRM with coral reef coverage percentage of 8,5%. Observation in 10 meters depth

Coral Reef Coverage Percentage on Binor Paiton-Probolinggo Seashore

Directory of Open Access Journals (Sweden)

Dwi Budi Wiyanto

2016-02-01

Full Text Available The coral reef damage in Probolinggo region was expected to be caused by several factors. The first one comes from its society that exploits fishery by using cyanide toxin and bomb. The second one goes to the extraction of coral reef, which is used as decoration or construction materials. The other factor is likely caused by the existence of large industry on the seashore, such as Electric Steam Power Plant (PLTU Paiton and others alike. Related to the development of coral reef ecosystem, availability of an accurate data is crucially needed to support the manner of future policy, so the research of coral reef coverage percentage needs to be conducted continuously. The aim of this research is to collect biological data of coral reef and to identify coral reef coverage percentage in the effort of constructing coral reef condition basic data on Binor, Paiton, and Probolinggo regency seashore. The method used in this research is Line Intercept Transect (LIT method. LIT method is a method that used to decide benthic community on coral reef based on percentage growth, and to take note of benthic quantity along transect line. Percentage of living coral coverage in 3 meters depth on this Binor Paiton seashore that may be categorized in a good condition is 57,65%. While the rest are dead coral that is only 1,45%, other life form in 23,2%, and non-life form in 17,7%. A good condition of coral reef is caused by coral reef transplantation on the seashore, so this coral reef is dominated by Acropora Branching. On the other hand, Mortality Index (IM of coral reef resulted in 24,5%. The result from observation and calculation of coral reef is dominated by Hard Coral in Acropora Branching (ACB with coral reef coverage percentage of 39%, Coral Massive (CM with coral reef coverage percentage of 2,85%, Coral Foliose (CF with coral reef coverage percentage of 1,6%, and Coral Mushroom (CRM with coral reef coverage percentage of 8,5%. Observation in 10 meters depth

Effect of percentage of low plastic fines on the unsaturated shear strength of compacted gravel soil

Directory of Open Access Journals (Sweden)

Kamal Mohamed Hafez Ismail Ibrahim

2015-06-01

Full Text Available Low plastic fines in gravel soils affect its unsaturated shear strength due to the contribution of matric suction that arises in micro and macro pores found within and between aggregates. The shear strength of five different types of prepared gravel soils is measured and is compared with a theoretical model (Fredlund et al., 1978 to predict the unsaturated shear strength. The results are consistent to a great extent except the case of dry clayey gravel soil. It is also found that on inundation of gravel soils containing plastic fines greater than 12% a considerable reduction in both the strength and the stiffness modulus is noticed. This 12% percentage is close to the accepted 15% percentage of fines given by ASTM D4318 (American society for testing material. The angle of internal friction that arises due to matric suction decreases with the increase of degree of saturation of soil. The hysteresis of some tested gravel soils is measured and found that it increases by increasing the percentage of fines.

VARIOUS FACTORS AFFECTING DRESSING PERCENTAGE OF COMMERCIALLY CULTURED CYPRINID FISH IN CARP FISH PONDS IN SERBIA

Directory of Open Access Journals (Sweden)

Todor Marković

2012-12-01

Full Text Available The aim of this study was to determine the yield carcass of all categories of cyprinid fish reared in ponds in Serbia. Samples of two and three-year old carp, two-year old silver carp and grass carp were taken in the winter from a pond where the production is organized in a semi­intensive system. The three­year old carp was sampled from two ponds. In one case, it fed on barley, maize and wheat in the following proportions 40:30:30, while in the second case it fed on complete diet mixtures. Also, the samples of two­year old carp were taken from ponds where they fed on complete feed mixture. Dressing percentage was the most favourable in common carp (67%, followed by silver carp (62%, and it was the least in grass carp (60% (p<0.01. The best yield (66% was obtained in two-year old carp, followed by one-year old carp (64%, and the worst yield was determined in three-year old carp (58% (p<0.01. Carcasses yield was better in two-year old carp fed on pelleted feed (68% than in carp of the same age fed on grains (66% (p<0.01. The values of dressing percentage measured in three-year old carp reared in the semi-intensive system was 56%, and 59% in three-year old carp fed on pelleted complete feed mixture. Fish species, age, system of husbandry and diet showed a significant effect on carcasses yield. The highest dressing percentage and weight of fillets was noted in two-year old carp fed on complete feed, and it was a result of lower weight of internal organs and associated fat. The obtained results may be helpful in creating the best strategy for the selection of raw fish for fish manufacturing.

determination of perce rmination of percentage of caffeine content

African Journals Online (AJOL)

userpc

ABSTRACT. Two methods were employed for the deter brands of analgesic tablets which are;. Extraction using both water and chlorofor weighing apparatus and the percentage of. The percentage of caffeine using only water. Boska, and Panadol Extra were 7.40%, 5.60 caffeine using both water and chloroform i.

26 CFR 1.613-1 - Percentage depletion; general rule.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 7 2010-04-01 2010-04-01 true Percentage depletion; general rule. 1.613-1... TAX (CONTINUED) INCOME TAXES (CONTINUED) Natural Resources § 1.613-1 Percentage depletion; general rule. (a) In general. In the case of a taxpayer computing the deduction for depletion under section 611...

Determination of percentage of caffeine content in some analgesic ...

African Journals Online (AJOL)

Two methods were employed for the determination of percentage Caffeine content in three brands of analgesic tablets which are; Extraction using only water as a solvent and Extraction using both water and chloroform as solvents, watch glass has been used as the weighing apparatus and the percentage of Caffeine ...

Beyond Research Productivity: Matching Productivity Measures to Institutional Mission

Directory of Open Access Journals (Sweden)

Patricia Bartholomew

2016-11-01

Full Text Available Aim/Purpose: The aim of this paper is to develop a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate departmental productivity that fills the gap in methodological bench-marking tools for overall faculty productivity. Background:\tA disproportionate number of departmental and faculty productivity indices in higher education rely solely on research. Productivity in other areas of faculty workload areas, like teaching and institutional and community service, are either measured separately or ignored all together – even when those activities are institutionally mandated. This does a disservice to those who work in those institutions and skews incentives. Methodology: This paper utilizes a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate depart-mental productivity in five disparate departments (English, Biology, Mathematics, Sociology, and Computer Science common to two universities with differing missions (teaching and service. Findings: The results reveal the bias inherent in relying solely on research as a proxy for overall productivity in institutions that have differing missions. Recommendations for Practitioners: Utilizing better metrics informs higher education administrators, promotes better decision-making, and allows incentives to re-align with desired outcomes. Recommendation for Researchers: This paper recommends combing all aspects of faculty workload into a single benchmark index to better measure departmental productivity. Future Research: Further research into improving this simple index is warranted and would include how to account for quality and other facets of productivity.

ATLAS measurements of vector boson production

CERN Document Server

Levchenko, M; The ATLAS collaboration

2014-01-01

ATLAS measurements of vector boson production with associated jets Productions of light and heavy-flavour jets in association with a W or a Z boson in proton-proton collisions are important processes to study QCD in multi-scale environments and the proton parton content. The cross section, differential in several kinematics variables, have been measured with the ATLAS detector in 7 TeV proton-proton collisions and compared to high-order QCD calculations and Monte Carlo simulations. The results demonstrate the need for the inclusion of high-multiplicity matrix elements in the calculations of high jet multiplicities. The ratio of (Z+jets)/(W+jets) provides a precise test of QCD due to the large cancellations of theoretical and experimental uncertainties. Measurement of W+c production cross section has a unique sensitivity to the strange-quark density, which is poorly known at low x. W or Z boson production in association with b-quark jets, on the other hand, probes the b-quark density in the proton and the b-qu...

7 CFR 51.308 - Methods of sampling and calculation of percentages.

Science.gov (United States)

2010-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples Methods of Sampling and Calculation of Percentages § 51.308 Methods of sampling and calculation of percentages. (a) When the numerical... 7 Agriculture 2 2010-01-01 2010-01-01 false Methods of sampling and calculation of percentages. 51...

Transaction costs and social networks in productivity measurement

DEFF Research Database (Denmark)

Henningsen, Geraldine; Henningsen, Arne; Henning, Christian H. C. A.

2015-01-01

and support. Hence, we use measures of a firm’s access to social networks as a proxy for the transaction costs the firm faces. We develop a microeconomic production model that takes into account transaction costs and networks. Using a data set of 384 Polish farms, we empirically estimate this model......We argue that in the presence of transaction costs, observed productivity measures may in many cases understate the true productivity, as production data seldom distinguish between resources entering the production process and resources of a similar type that are sacrificed for transaction costs....... Hence, both the absolute productivity measures and, more importantly, the productivity ranking will be distorted. A major driver of transaction costs is poor access to information and contract enforcement assistance. Social networks often catalyse information exchange as well as generate trust...

Development of a fibre-optic dosemeter to measure the skin dose and percentage depth dose in the build-up region of therapeutic photon beams

International Nuclear Information System (INIS)

Kim, K. A.; Yoo, W. J.; Jang, K. W.; Moon, J.; Han, K. T.; Jeon, D.; Park, J. Y.; Cha, E. J.; Lee, B.

2013-01-01

In this study, a fibre-optic dosemeter (FOD) using an organic scintillator with a diameter of 0.5 mm for photon-beam therapy dosimetry was fabricated. The fabricated dosemeter has many advantages, including water equivalence, high spatial resolution, remote sensing and real-time measurement. The scintillating light generated from an organic-dosemeter probe embedded in a solid-water stack phantom is guided to a photomultiplier tube and an electrometer via 20 m of plastic optical fibre. Using this FOD, the skin dose and the percentage depth dose in the build-up region according to the depths of a solid-water stack phantom are measured with 6- and 15-MV photon-beam energies with field sizes of 10310 and 20320 cm 2 , respectively. The results are compared with those measured using conventional dosimetry films. It is expected that the proposed FOD can be effectively used in radiotherapy dosimetry for accurate measurement of the skin dose and the depth dose distribution in the build-up region due to its high spatial resolution. (authors)

Why measure radon decay products?

International Nuclear Information System (INIS)

Rolle, R.; Lettner, H.

1997-01-01

Combined development in spectrometry, instrumentation and ventilation modelling with its dependence on short- and long-term weather fluctuations renders possible a new, economical metrology for radon decay products. Short-term measurements can, with few restrictions, be converted to annual exposures of an accuracy superior to that from conventional medium-term Rn gas measurements. (orig.) [de

Association between frequency of atrial and ventricular ectopic beats and biventricular pacing percentage and outcomes in patients with cardiac resynchronization therapy

DEFF Research Database (Denmark)

Ruwald, Martin H; Mittal, Suneet; Ruwald, Anne-Christine

2014-01-01

-defibrillator device with data available on biventricular pacing percentage and pre-implantation 24-h Holter recordings were included. Using logistic regression, we estimated the influence of ectopic beats on the percentage of biventricular pacing. Reverse remodeling was measured as reductions in atrial and left...

The investigation of in-vivo measurement of individual renal blood perfusion, effective renal plasma flow and quantitation of renogram and 15 min bladder collection percentage

International Nuclear Information System (INIS)

Huang Kangchu

1991-01-01

25 normals and 43 renal diseases were examined by the RBF-I multifunctioning renography. The result showed that the determination of ERPF has no difference between blood sampling and noin-blood sampling method, and actually the lattrer can replace the former one. Above method can be also used for the measurement of the individual renal blood perfusion, the quantitation of renogram and the 15 min bladder coolection percentage at the same time. Thereby it provides more complete diagnostic information for the renal vascular diseases, renal pancren chymations and other urologic diseases

13 CFR 126.701 - Can these subcontracting percentages requirements change?

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Can these subcontracting percentages requirements change? 126.701 Section 126.701 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION HUBZONE PROGRAM Contract Performance Requirements § 126.701 Can these subcontracting percentages...

Measuring on-shelf availability of FMCG products

Directory of Open Access Journals (Sweden)

Grubor Aleksandar

2015-01-01

Full Text Available Technological development and the process of globalization influence the increase of customers' awareness. In these circumstances they are becoming more demanding, expecting retailers to offer them the right product at the right time and at the right place. The result is one of the basic tasks of retailers, which reflects in providing an adequate level of product availability in retail stores. In order to prevent the stock-out situation, special attention should be dedicated to its identification and measurement. These operations are very important for establishing and implementing other various measures for increasing product availability and thus sales and competitiveness of retail companies. In this regard, besides theoretical considerations of product availability, we presented the basic methods for its measurement. Also, by using the sample of six Fast Moving Consumer goods categories, we applied the method based on the analysis of POS data. In addition to identifying the out-of-stock rates, we confirmed the results of other studies that product availability varies among different categories and retail stores.

Measurement of uterine natural killer cell percentage in the periimplantation endometrium from fertile women and women with recurrent reproductive failure: establishment of a reference range.

Science.gov (United States)

Chen, Xiaoyan; Mariee, Najat; Jiang, Lingming; Liu, Yingyu; Wang, Chi Chiu; Li, Tin Chiu; Laird, Susan

2017-12-01

Uterine natural killer cells are the major leukocytes present in the periimplantation endometrium. Previous studies have found controversial differences in uterine natural killer cell percentage in women with recurrent reproductive failure compared with fertile controls. We sought to compare the uterine natural killer cell percentage in women with recurrent reproductive failure and fertile controls. This was a retrospective study carried out in university hospitals. A total of 215 women from 3 university centers participated in the study, including 97 women with recurrent miscarriage, 34 women with recurrent implantation failure, and 84 fertile controls. Endometrial biopsy samples were obtained precisely 7 days after luteinization hormone surge in a natural cycle. Endometrial sections were immunostained for CD56 and cell counting was performed by a standardized protocol. Results were expressed as percentage of positive uterine natural killer cell/total stromal cells. The median uterine natural killer cell percentage in Chinese ovulatory fertile controls in natural cycles was 2.5% (range 0.9-5.3%). Using 5th and 95th percentile to define the lower and upper limits of uterine natural killer cell percentage, the reference range was 1.2-4.5%. Overall, the groups with recurrent reproductive failure had significantly higher uterine natural killer cell percentage than the controls (recurrent miscarriage: median 3.2%, range 0.6-8.8%; recurrent implantation failure: median 3.1%, range 0.8-8.3%). However, there was a subset of both groups (recurrent miscarriage: 16/97; recurrent implantation failure: 6/34) that had lower uterine natural killer cell percentage compared to fertile controls. A reference range for uterine natural killer cell percentage in fertile women was established. Women with recurrent reproductive failure had uterine natural killer cell percentages both above and below the reference range. Copyright © 2017 Elsevier Inc. All rights reserved.

Measuring green productivity of country: A generlized metafrontier Malmquist productivity index approach

International Nuclear Information System (INIS)

Yu-Ying Lin, Eugene; Chen, Ping-Yu; Chen, Chi-Chung

2013-01-01

This paper measures environmental productivity in 70 countries over the period 1981–2007. Differences in green (environmental) productivity growth across countries under distinct country specific production frontier are measured using directional distance function model, which incorporates desirable output (GDP) and undesirable output (CO 2 emissions). The metafrontier which envelops the two country groups, developed countries and developing countries, are estimated using balanced panel data for the sample countries over the study period. A parametric method is used to compute technical efficiency change, technical change, and scale efficiency change, which aggregate to the generalized metafrontier Malmquist productivity index. The overall results indicated the two country groups operated under distinct stochastic production frontiers and therefore used different production technologies. It is found that developing countries achieved higher growth in their average environmental productivity relative to the metafrontier. Thus the results coincide with the convergence growth theory

Percentage compensation arrangements: suspect, but not illegal.

Science.gov (United States)

Fedor, F P

2001-01-01

Percentage compensation arrangements, in which a service is outsourced to a contractor that is paid in accordance with the level of its performance, are widely used in many business sectors. The HHS Office of Inspector General (OIG) has shown concern that these arrangements in the healthcare industry may offer incentives for the performance of unnecessary services or cause false claims to be made to Federal healthcare programs in violation of the antikickback statute and the False Claims Act. Percentage compensation arrangements can work and need not run afoul of the law as long as the healthcare organization carefully oversees the arrangement and sets specific safeguards in place. These safeguards include screening contractors, carefully evaluating their compliance programs, and obligating them contractually to perform within the limits of the law.

The Language of Comparisons: Communicating about Percentages

Directory of Open Access Journals (Sweden)

Jessica Polito

2014-01-01

Full Text Available While comparisons between percentages or rates appear frequently in journalism and advertising, and are an essential component of quantitative writing, many students fail to understand precisely what percentages mean, and lack fluency with the language used for comparisons. After reviewing evidence demonstrating this weakness, this experience-based perspective lays out a framework for teaching the language of comparisons in a structured way, and illustrates it with several authentic examples that exemplify mistaken or misleading uses of such numbers. The framework includes three common types of erroneous or misleading quantitative writing: the missing comparison, where a key number is omitted; the apples-to-pineapples comparison, where two subtly incomparable rates are presented; and the implied fallacy, where an invalid quantitative conclusion is left to the reader to infer.

Automated objective determination of percentage of malignant nuclei for mutation testing.

Science.gov (United States)

Viray, Hollis; Coulter, Madeline; Li, Kevin; Lane, Kristin; Madan, Aruna; Mitchell, Kisha; Schalper, Kurt; Hoyt, Clifford; Rimm, David L

2014-01-01

Detection of DNA mutations in tumor tissue can be a critical companion diagnostic test before prescription of a targeted therapy. Each method for detection of these mutations is associated with an analytic sensitivity that is a function of the percentage of tumor cells present in the specimen. Currently, tumor cell percentage is visually estimated resulting in an ordinal and highly variant result for a biologically continuous variable. We proposed that this aspect of DNA mutation testing could be standardized by developing a computer algorithm capable of accurately determining the percentage of malignant nuclei in an image of a hematoxylin and eosin-stained tissue. Using inForm software, we developed an algorithm, to calculate the percentage of malignant cells in histologic specimens of colon adenocarcinoma. A criterion standard was established by manually counting malignant and benign nuclei. Three pathologists also estimated the percentage of malignant nuclei in each image. Algorithm #9 had a median deviation from the criterion standard of 5.4% on the training set and 6.2% on the validation set. Compared with pathologist estimation, Algorithm #9 showed a similar ability to determine percentage of malignant nuclei. This method represents a potential future tool to assist in determining the percent of malignant nuclei present in a tissue section. Further validation of this algorithm or an improved algorithm may have value to more accurately assess percentage of malignant cells for companion diagnostic mutation testing.

Measurements of fusion product emission profiles in tokamaks

International Nuclear Information System (INIS)

Strachan, J.D.; Heidbrink, W.W.; Hendel, H.W.; Lovberg, J.; Murphy, T.J.; Nieschmidt, E.B.; Tait, G.D.; Zweben, S.J.

1986-11-01

The techniques and results of fusion product emission profile measurements are reviewed. While neutron source strength profile measurements have been attempted by several methods, neutron scattering is a limitation to the results. Profile measurements using charged fusion products have recently provided an alternative since collimation is much easier for the charged particles

Measurement of Charmonium Production Cross Section at LHCb

CERN Multimedia

Frosini, M

2010-01-01

The great abundance of charmonium states, collected from the start up of LHC, allows to study its production mechanism. In particular the total and differential $J/\\psi$ production cross section are measured in the transverse momentum range [0;10] GeV/$c$ and in the pseudorapidity range $y \\in$ [2.5;4]. The measurements are performed disentagling the prompt (direct production in $pp$ collisions and feed down from excited charmonium states) and delayed ($b$-hadron decays products) component.

Comparison of variations between percentage of body fat, body mass index and daily physical activity among young Japanese and Thai female students

Directory of Open Access Journals (Sweden)

Morinaka Tomoko

2012-08-01

Full Text Available Abstract Background In our series of investigations concerning the causes of seasonal change in fat accumulation in young university students, we could not find any contribution of seasonal variation in the ratio of carbohydrate and fat metabolism to that of body fat percentage in Japanese and Thai participants. After our previous study, we examined the effect of daily physical activity on body fat percentage to look for the major causes of seasonal change in fat accumulation in young university students. Findings In this study, we measured participants’ (young Japanese and Thai university students daily physical activity by a uniaxial accelerometer in addition to the measurements of body fat percentage and body mass index by a bioelectrical impedance meter. We found that there was significant and moderate negative correlation between body fat percentage and daily step counts among Japanese but not Thai participants. We observed significant, moderate and positive correlations between the percentage of body fat and body mass index among Japanese and Thai participants. Conclusions Daily physical activity plays an important role in the seasonal variation of body fat percentage of Japanese female students. Our present study also confirmed the importance of daily physical activity for controlling body mass index and for the prevention of obesity.

78 FR 48789 - Loan Guaranty: Percentage to Determine Net Value

Science.gov (United States)

2013-08-09

... DEPARTMENT OF VETERANS AFFAIRS Loan Guaranty: Percentage to Determine Net Value AGENCY: Department... mortgage holders in the Department of Veterans Affairs (VA) loan guaranty program concerning the percentage to be used in calculating the purchase price of a property that secured a terminated loan. The new...

Profile of Cardiorespiratory Fitness, Flexibility and Fat Percentage of Junior High School Students in Jatinangor

Directory of Open Access Journals (Sweden)

Gemuruh Putra Akbar

2017-06-01

Full Text Available Background: Obesity and physical inactivity is a major risk factor for non-communicable disease and global mortality in adolescent. Lack of physical activity will lead the condition into poor physical fitness, measured by cardio respiratory fitness (maximum oxygen volume, VO2 max, and other components such as flexibility. The study aimed to describe VO2 max, flexibility and fat percentage among junior high school students in Jatinangor. Methods: The study was a descriptive observational study using descriptive analysis.  VO2 max was assessed using Astrand Ryhming step test, flexibility was measured using flexometer sit and reach test, and fat percentage was determined using bioelectrical impedance analysis scale. The subjects were junior high school students who were study in 1st, 2nd and 3rd grade in Jatinangor Junior High School based on stratification sampling method. It was conducted from September–October 2013. Results: Total subjects were 110 students consisted of male (n=52 and female (n=58.  The VO2 max were in good and above category, 57.69% of male (50.37 ± 9.80 ml/kg/min, and 60.34% of female (37.66±7.03 ml/kg/min. The flexibility for both males and females were within excellent category (67.31%, 26.56 ±7.14 cm and 67.24%, 27.29±6.64 cm respectively. The fat percentage in females were within healthy category (67.24%, 25.28 ± 6.85 %, meanwhile male were within underfat category (48.08%, 11.66 ± 5.83 %. Conclusions: The majority of VO2 max, and flexibility both in male and female were good. The fat percentages were good in female students, while in male students were under normal range. DOI: 10.15850/amj.v4n2.1085

Product-Marketing Innovation, Skills and Firm Productivity Growth

DEFF Research Database (Denmark)

Junge, Martin; Severgnini, Battista; Sørensen, Anders

The role of product and marketing innovation for productivity growth is addressed using survey and register data for the Danish economy. It is argued that marketing and product innovation are complementary inputs and that innovation activities are skill-intensive. It is found that product...... and marketing innovation in skill-intensive firms results in significantly faster productivity growth than in unskilled-intensive firms that introduce this combination of innovation activities. More precisely, an increase in the share of educated workers of one percentage point, increases productivity growth...... by around 0.1 percentage point in firms with product and marketing innovation. In addition, it is found that firms that engage in product innovation but not in marketing innovation or the other way around do not demonstrate a growth effect from their innovation activities. It is also found that product...

Effect of breed and non-genetic factors on percentage milk ...

African Journals Online (AJOL)

This study was done to determine the effect of breed and non-genetic factors on percentage milk composition of smallholders' dual-purpose cattle on-farm in the Ashanti Region. Fresh milk samples from various breeds of cows were assessed for percentage components of protein, fat, lactose, cholesterol, solidnon- fat and ...

Elasticity of Substitution for Production Functions in Romania and other Countries

Directory of Open Access Journals (Sweden)

Gheorghe Zaman

2007-02-01

Full Text Available The production function is explaining the mechanism through which inputs are changed into outputs and the partial efficiency of labour and capital. It also allows for understanding the elasticity of substitution, which measures the percentage change in factor proportions due to a percentage change in the marginal rate of technical substitution. In this study we have applied the two factor Constant Elasticity of Substitution (CES production function, which is considered to be the generalised form of the Cobb-Douglas function. Using the available statistical data regarding Romania's economy in 1990-1005 period, we have performed time-series and cross-section analysis based on the aggregated production functions at national level.

ATLAS measurement of Electroweak Vector Boson production

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00453010; The ATLAS collaboration

2017-01-01

The measurements of the Drell-Yan production of W and Z/γ⁎ bosons at the LHC provide a benchmark of our understanding of the perturbative QCD and probe the proton structure in a unique way. The ATLAS collaboration has performed new high precision measurements of the double differential cross-sections as a function of the dilepton mass and rapidity. The measurements are compared to state of calculations at NNLO in QCD and constrain the photon content of the proton. The angular distributions of the Drell-Yan lepton pairs around the Z-boson mass peak probe the underlying QCD dynamics of the Z-boson production mechanisms. The complete set of angular coefficients describing these distributions is presented and compared to theoretical predictions highlighting different approaches of the QCD and EW modelling. First precise inclusive measurements of W and Z production at 13 TeV are presented. $W/Z$ and $W^{+}/W^{−}$ ratios profit from a cancellation of experimental uncertainties.

Force decay of elastomeric chains - a mechanical design and product comparison study.

Science.gov (United States)

Balhoff, David A; Shuldberg, Matthew; Hagan, Joseph L; Ballard, Richard W; Armbruster, Paul C

2011-03-01

To evaluate the percentage force decay of elastomeric chain products utilizing three different design mechanisms simulating canine retraction; and to evaluate the percentage force decay of elastomeric chain products from four different companies. In vitro, laboratory study. LSUHSC Dental School, New Orleans, LA, USA. Closed (non-spaced), grey elastomeric chains from four companies were selected for the study. Three acrylic resin jigs were constructed to provide a framework for three simulated space closure mechanisms. The 6-5-3, the chain loop, and the 6-3 were the configuration mechanisms used in the study. An electronic force gauge was used to measure the percentage force decay associated with each elastomeric chain over 28 days at preselected times. There was a significant difference in the mean percentage force decay for the three different mechanisms (P < 0·001). For all four companies, the 6-3 mechanical design had the smallest mean percentage force decay. There was a significant difference in the mean percentage force decay for the different companies (P < 0·001). For all three mechanisms, Ormco had the smallest percentage force decay while Unitek had the highest percentage force decay. The significant difference in the mean percentage force decay for the different mechanisms suggests that the 6-3 design is a more efficient means of closing extraction spaces utilizing elastomeric chains.

Estimation of lean and fat composition of pork ham using image processing measurements

Science.gov (United States)

Jia, Jiancheng; Schinckel, Allan P.; Forrest, John C.

1995-01-01

This paper presents a method of estimating the lean and fat composition in pork ham from cross-sectional area measurements using image processing technology. The relationship between the quantity of ham lean and fat mass with the ham lean and fat areas was studied. The prediction equations for pork ham composition based on the ham cross-sectional area measurements were developed. The results show that ham lean weight was related to the ham lean area (r equals .75, P lean weight was highly related to the product of ham total weight times percentage ham lean area (r equals .96, P product of ham total weight times percentage ham fat area (r equals .88, P lean weight was trimmed wholesale ham weight and percentage ham fat area with a coefficient of determination of 92%. The best combination of independent variables for estimating ham fat weight was trimmed wholesale ham weight and percentage ham fat area with a coefficient of determination of 78%. Prediction equations with either two or three independent variables did not significantly increase the accuracy of prediction. The results of this study indicate that the weight of ham lean and fat could be predicted from ham cross-sectional area measurements using image analysis in combination with wholesale ham weight.

Geographic origin of publications in radiological journals as a function of GDP and percentage of GDP spent on research.

LENUS (Irish Health Repository)

Halpenny, Darragh

2010-06-01

The aim of this study was to examine the geographic origin of publications in the highest impacting radiology journals and to examine the link between the percentage of gross domestic product (GDP) spent on research by a country and the output of radiology publications.

Measurement of single top quark production with CMS

CERN Document Server

Andrea, Jeremy

2018-01-01

Several measurements of single top quark production in proton-proton collisions at the LHC at centre-of-mass energies of 7, 8 and 13 TeV, using data collected with the CMS experiment, are presented. The analyses investigate separately the productions of top via t-channel exchange, in association with a W boson (tW) or via the s-channel. Final states with at least one charged lepton and one b-jet are explored to measure inclusive production cross sections. Fiducial and differential cross section measurements in the t-channel are also reported. The measurements can be used to constrain directly the Vtb CKM matrix element by comparing with the most precise standard model theory predictions. Measurements of rare processes involving a top quark and a neutral EWK boson (Z or photon) are also discussed.

Forecasting Error Calculation with Mean Absolute Deviation and Mean Absolute Percentage Error

Science.gov (United States)

Khair, Ummul; Fahmi, Hasanul; Hakim, Sarudin Al; Rahim, Robbi

2017-12-01

Prediction using a forecasting method is one of the most important things for an organization, the selection of appropriate forecasting methods is also important but the percentage error of a method is more important in order for decision makers to adopt the right culture, the use of the Mean Absolute Deviation and Mean Absolute Percentage Error to calculate the percentage of mistakes in the least square method resulted in a percentage of 9.77% and it was decided that the least square method be worked for time series and trend data.

Body Fat Percentage Prediction Using Intelligent Hybrid Approaches

Directory of Open Access Journals (Sweden)

Yuehjen E. Shao

2014-01-01

Full Text Available Excess of body fat often leads to obesity. Obesity is typically associated with serious medical diseases, such as cancer, heart disease, and diabetes. Accordingly, knowing the body fat is an extremely important issue since it affects everyone’s health. Although there are several ways to measure the body fat percentage (BFP, the accurate methods are often associated with hassle and/or high costs. Traditional single-stage approaches may use certain body measurements or explanatory variables to predict the BFP. Diverging from existing approaches, this study proposes new intelligent hybrid approaches to obtain fewer explanatory variables, and the proposed forecasting models are able to effectively predict the BFP. The proposed hybrid models consist of multiple regression (MR, artificial neural network (ANN, multivariate adaptive regression splines (MARS, and support vector regression (SVR techniques. The first stage of the modeling includes the use of MR and MARS to obtain fewer but more important sets of explanatory variables. In the second stage, the remaining important variables are served as inputs for the other forecasting methods. A real dataset was used to demonstrate the development of the proposed hybrid models. The prediction results revealed that the proposed hybrid schemes outperformed the typical, single-stage forecasting models.

Geographic origin of publications in radiological journals as a function of GDP and percentage of GDP spent on research.

Science.gov (United States)

Halpenny, Darragh; Burke, John; McNeill, Graeme; Snow, Aisling; Torreggiani, William C

2010-06-01

The aim of this study was to examine the geographic origin of publications in the highest impacting radiology journals and to examine the link between the percentage of gross domestic product (GDP) spent on research by a country and the output of radiology publications. The five highest impacting general radiology journals (according to the ISI Web of Knowledge database) were selected over a 6-year period from January 2002 to December 2007. Publications were totaled according to the country of the corresponding author. Publications (total and corrected for population size) were assessed according to the GDP of a given country and the percentage of GDP spent on research in that country. Correlation was determined using Spearman's rank. In total, 10,925 papers were identified. The top 10 nations produced 83.9% of the total number of papers. The United States was the most prolific country, with 41.7% of the total. The second-ranked and third-ranked countries were Germany (11.6%) and Japan (6.7%). Corrected for GDP, smaller European countries outperformed larger nations. Switzerland (0.925 publications per billion of GDP), Austria (0.694 publications per billion of GDP), and Belgium (0.648 publications per billion of GDP) produced the most papers per billion of GDP. When corrected for percentage of GDP spent on research, European countries again ranked highest, with Greece, Turkey, and Belgium having the best ratios. The percentage of GDP spent on research was positively correlated with the number of publications in high-ranking radiology journals (r = 0.603, P GDP and the percentage of GDP spent on research may give more meaningful results. When GDP is taken into consideration, smaller European countries are more productive. The importance of investment in radiologic research is emphasized by the association between increased funding of research and the number of publications in high-impacting radiology journals. Copyright (c) 2010 AUR. Published by Elsevier Inc. All

Technological measures to improve automotive product quality

OpenAIRE

Gladkov, V.; Kruglov, S.

2010-01-01

The paper examines the basic technological measures aimed at improving product quality in automotive industry. While paying due attention to solving organizational and technological problems, including the development of certification systems for production processes, it is also necessary to improve the technical standards of specific technologies, equipment and materials as they largely determine product quality. Special emphasis is given to the importance of improving the production of auto...

DEXA measures of body fat percentage and acute phase proteins among breast cancer survivors: a Cross-Sectional Analysis

International Nuclear Information System (INIS)

Dee, Anne; Bernstein, Leslie; McKean-Cowdin, Roberta; Neuhouser, Marian L; Ulrich, Cornelia; Baumgartner, Richard N; McTiernan, Anne; Baumgartner, Kathy; Alfano, Catherine M; Ballard-Barbash, Rachel

2012-01-01

C-reactive protein (CRP) and Serum amyloid A protein (SAA) increases with systemic inflammation and are related to worse survival for breast cancer survivors. This study examines the association between percent body fat and SAA and CRP and the potential interaction with NSAID use and weight change. Participants included 134 non-Hispanic white and Hispanic breast cancer survivors from the Health, Eating, Activity, and Lifestyle Study. Body fat percentage, measured with Dual Energy X-ray Absorptiometer (DEXA), and circulating levels of CRP and SAA were obtained 30 months after breast cancer diagnosis. Circulating concentrations of CRP and SAA were associated with increased adiposity as measured by DEXA after adjustment for age at 24-months, race/ethnicity, dietary energy intake, weight change, and NSAID use. Survivors with higher body fat ≥35% had significantly higher concentrations of CRP (2.01 mg/l vs. 0.85 mg/l) and SAA (6.21 mg/l vs. 4.21 mg/l) compared to non-obese (body fat < 35%). Women who had gained more than 5% of their body weight since breast cancer diagnosis had non-statistically significant higher geometric mean levels of CRP and SAA. Mean levels of CRP and SAA were higher among obese women who were non-users of NSAIDs compared to current users; the association with SAA reached statistical significance (Mean SAA = 7.24, 95%CI 6.13-8.56 for non-NSAID; vs. 4.87; 95%CI 3.95-6.0 for NSAID users respectively). Breast cancer survivors with higher body fat had higher mean concentrations of CRP and SAA than women with lower body fat. Further assessment of NSAID use and weight control in reducing circulating inflammatory markers among survivors may be worthwhile to investigate in randomized intervention trials as higher inflammatory markers are associated with worse survival

AC Own Motion Percentage of Randomly Sampled Cases

Data.gov (United States)

Social Security Administration — Longitudinal report detailing the numbers and percentages of Appeals Council (AC) own motion review actions taken on un-appealed favorable hearing level decisions...

Does Input Quality Drive Measured Differences in Firm Productivity?

DEFF Research Database (Denmark)

Fox, Jeremy T.; Smeets, Valerie Anne Rolande

is roughly of the same order of magnitude as some competitive effects found in the literature, but input quality measures do not explain most productivity dispersion, despite economically large production function coefficients. We find that the wage bill explains as much dispersion as human capital measures.......Firms in the same industry can differ in measured productivity by multiples of 3. Griliches (1957) suggests one explanation: the quality of inputs differs across firms. We add labor market history variables such as experience and firm and industry tenure, as well as general human capital measures...

Using Data Envelopment Analysis to Measure International Agricultural Efficiency and Productivity

OpenAIRE

Arnade, Carlos Anthony

1994-01-01

Numerous methods for measuring multifactor productivity have been used by economists. This report uses a recently developed approach, data envlopment analysis, to measure productivity. This method can be used not only to calculate productivity but also to divide productivity measures into indices that measure technical efficiency and technical change. Technical efficiency measures the efficiency with which resources are used. Technical change measures changes in output arising from improved t...

Device for measuring fission product density

International Nuclear Information System (INIS)

Kaneda, Mitsunori.

1980-01-01

Purpose: To determine the fission product density of xenon or the like and enable measurement of real time of fission product density in a reactor by calculating the disintegration and annihilation of the fission product on the basis of neutron detected output. Constitution: The neutron flux in a reactor is detected by a detector, and applied to first and second density calculators. Second fission product density signal of xenon or the like outputted from first device is again inputted to the device to form an annihilation signal due to disintegration to determine the present density of the second fission product of xenon or the like corresponding to the decrease of the neutron due to the poison of xeron or the like. Similarly, second device determines the first fission product density of iodine or the like. (Sekiya, K.)

Predicted percentage dissatisfied with ankle draft.

Science.gov (United States)

Liu, S; Schiavon, S; Kabanshi, A; Nazaroff, W W

2017-07-01

Draft is unwanted local convective cooling. The draft risk model of Fanger et al. (Energy and Buildings 12, 21-39, 1988) estimates the percentage of people dissatisfied with air movement due to overcooling at the neck. There is no model for predicting draft at ankles, which is more relevant to stratified air distribution systems such as underfloor air distribution (UFAD) and displacement ventilation (DV). We developed a model for predicted percentage dissatisfied with ankle draft (PPD AD ) based on laboratory experiments with 110 college students. We assessed the effect on ankle draft of various combinations of air speed (nominal range: 0.1-0.6 m/s), temperature (nominal range: 16.5-22.5°C), turbulence intensity (at ankles), sex, and clothing insulation (thermal sensation and air speed at ankles are the dominant parameters affecting draft. The seated subjects accepted a vertical temperature difference of up to 8°C between ankles (0.1 m) and head (1.1 m) at neutral whole-body thermal sensation, 5°C more than the maximum difference recommended in existing standards. The developed ankle draft model can be implemented in thermal comfort and air diffuser testing standards. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Semi-spontaneous oral text production: measurements in clinical practice.

Science.gov (United States)

Lind, Marianne; Kristoffersen, Kristian Emil; Moen, Inger; Simonsen, Hanne Gram

2009-12-01

Functionally relevant assessment of the language production of speakers with aphasia should include assessment of connected speech production. Despite the ecological validity of everyday conversations, more controlled and monological types of texts may be easier to obtain and analyse in clinical practice. This article discusses some simple measurements for the analysis of semi-spontaneous oral text production by speakers with aphasia. Specifically, the measurements are related to the production of verbs and nouns, and the realization of different sentence types. The proposed measurements should be clinically relevant, easily applicable, and linguistically meaningful. The measurements have been applied to oral descriptions of the 'Cookie Theft' picture by eight monolingual Norwegian speakers, four with an anomic type of aphasia and four without any type of language impairment. Despite individual differences in both the clinical and the non-clinical group, most of the measurements seem to distinguish between speakers with and without aphasia.

7 CFR 981.47 - Method of establishing salable and reserve percentages.

Science.gov (United States)

2010-01-01

...) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF... effectuate the declared policy of the act, he shall designate such percentages. Except as provided in § 981... percentages, the Secretary shall give consideration to the ratio of estimated trade demand (domestic plus...

Crossbreeding to increase beef production: Additive and non ...

African Journals Online (AJOL)

Fitness is of paramount importance to efficient and profitable beef production. Thus, the objective of this study was to estimate genetic components of fitness traits measured in Afrikaner (A), Brahman (B), Charolais (C), Hereford (H) and Simmentaler (S). For this study, the fitness traits recorded were percentage of cows ...

Production Time Loss Reduction in Sauce Production Line by Lean Six Sigma Approach

Science.gov (United States)

Ritprasertsri, Thitima; Chutima, Parames

2017-06-01

In all industries, time losses, which are incurred in processing are very important. As a result, losses are incurred in productivity and cost. This research aimed to reduce lost time that occurs in sauce production line by using the lean six sigma approach. The main objective was to reduce the time for heating sauce which causes a lot of time lost in the production line which affects productivity. The methodology was comprised of the five-phase improvement model of Six Sigma. This approach begins with defining phase, measuring phase, analysing phase, improving phase and controlling phase. Cause-and-effect matrix and failure mode and effect analysis (FMEA) were adopted to screen the factors which affect production time loss. The results showed that the percentage of lost time from heating sauce reduced by 47.76%. This increased productivity to meet the plan.

Productivity measurement and growth in Nigeria: challenges and prospects

Directory of Open Access Journals (Sweden)

Chibueze C. IKEJI

2010-12-01

Full Text Available Productivity (growth measurements (describing the assessment of an economy’s rate of change in the ratio of a volume measure of output to a volume measure of input use and related analysis are regular undertakings by staff of economic development of most nations and development institutions such as the OECD. Although they strive to accomplish objectives related to studying efficiency or the achievement of maximum output physically achievable under the use of current technology and given inputs, accounting for the contribution of real costs savings; introduction of benchmarks for production processes and to highlight living standards obtaining at points in time, its emphasis has been at the expense of examination of issues related to society (institutions, history, innovation and productivity change, which are concerned with promoting growth beyond mere productivity accounting. This paper has attempted to address all these issues as they pertain to Nigeria’s rather stagnant or declining economy. This slight modification was prompted by changes from philosophers concerned with the wider area of productivity measurement and change. The literature agrees that productivity measurement (growth accounting only “identified the significance of different proximate sources of growth” but fails to employ institutional, historical case studies to investigate the underlying causes of the growth, innovation and productivity change. Details of deficiencies related to the foregoing issues are examined and policy recommendations drafted and presented to assist practitioners, policy and decision makers and other stakeholders.

26 CFR 1.1502-44 - Percentage depletion for independent producers and royalty owners.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 12 2010-04-01 2010-04-01 false Percentage depletion for independent producers...-44 Percentage depletion for independent producers and royalty owners. (a) In general. The sum of the percentage depletion deductions for the taxable year for all oil or gas property owned by all members, plus...

Experimental measurements of negative hydrogen ion production from surfaces

International Nuclear Information System (INIS)

Graham, W.G.

1977-09-01

Experimental measurements of the production of H - from surfaces bombarded with hydrogen are reviewed. Some measurements of H + and H 0 production from surfaces are also discussed with particular emphasis on work which might be relevant to ion source applications

Measurement of Single-top Quark Production with ATLAS Data

CERN Document Server

Holzbauer, J L

2011-01-01

Single-top production processes have been studied using 0.7 fb-1 of data from 7 TeV center-of-mass energy proton-proton collisions collected with the ATLAS detector at the LHC. Single-top is electroweak top production and the standard model includes three production modes. Each contains a Wtb vertex, allowing the possibility of a direct measurement of the CKM matrix element |Vtb|. Single-top could also be sensitive to new physics, such as flavor changing neutral currents or heavy W' bosons. Using cut-based selections, a limit of < 39.1 pb is set for dilepton Wt production and < 26.5 pb for s-channel production. For the t-channel measurement, both cut-based and neural network analyses are performed and the cross-section is measured to be 90 +32 -22 pb, where 65 +28 -19 pb is expected according to standard model.

Issues in Measurement and International Comparison of Productivity - An Overview

NARCIS (Netherlands)

Van Ark, Bart

1996-01-01

This paper reviews recent development in theory and measurement of productivity performance in an international comparative perspective. It emphasises the need for a better link between the theory and practice of measurement, in particular concerning measurement of productivity levels. The paper

Dosimetric measurement of the disintegration rate of fission products

International Nuclear Information System (INIS)

Solymosi, J.; Nagy, L.G.; Zagyvai, P.

1992-01-01

Investigations on the disintegration rate of fission products of 238 U and 239 Pu are presented. The intensity of the β-and γ-radiation of fission products were measured continously in an interval of 1-1300 hours following the fission, offering the possibility for determining the general and specific characteristics of the individual fission products. A universal measuring procedure was elaborated for the rapid in situ determination of the dosimetric features of fission products, which is suitable for the accurate evaluation and prediction of external absorbed dose even in case of fission products of various origin and unknown composition. (author) 6 refs.; 7 figs.; 1 tab

Predictive model for disinfection by-product in Alexandria drinking water, northern west of Egypt.

Science.gov (United States)

Abdullah, Ali M; Hussona, Salah El-dien

2013-10-01

Chlorine has been utilized in the early stages of water treatment processes as disinfectant. Disinfection for drinking water reduces the risk of pathogenic infection but may pose a chemical threat to human health due to disinfection residues and their by-products (DBP) when the organic and inorganic precursors are present in water. In the last two decades, many modeling attempts have been made to predict the occurrence of DBP in drinking water. Models have been developed based on data generated in laboratory-scale and field-scale investigations. The objective of this paper is to develop a predictive model for DBP formation in the Alexandria governorate located at the northern west of Egypt based on field-scale investigations as well as laboratory-controlled experimentations. The present study showed that the correlation coefficient between trihalomethanes (THM) predicted and THM measured was R (2)=0.88 and the minimum deviation percentage between THM predicted and THM measured was 0.8 %, the maximum deviation percentage was 89.3 %, and the average deviation was 17.8 %, while the correlation coefficient between dichloroacetic acid (DCAA) predicted and DCAA measured was R (2)=0.98 and the minimum deviation percentage between DCAA predicted and DCAA measured was 1.3 %, the maximum deviation percentage was 47.2 %, and the average deviation was 16.6 %. In addition, the correlation coefficient between trichloroacetic acid (TCAA) predicted and TCAA measured was R (2)=0.98 and the minimum deviation percentage between TCAA predicted and TCAA measured was 4.9 %, the maximum deviation percentage was 43.0 %, and the average deviation was 16.0 %.

Measuring Productivity Change without Neoclassical Assumptions: A Conceptual Analysis

NARCIS (Netherlands)

B.M. Balk (Bert)

2008-01-01

textabstractThe measurement of productivity change (or difference) is usually based on models that make use of strong assumptions such as competitive behaviour and constant returns to scale. This survey discusses the basics of productivity measurement and shows that one can dispense with most if not

Influence of casein as a percentage of true protein and protein level on color and texture of milks containing 1 and 2% fat.

Science.gov (United States)

Misawa, Noriko; Barbano, David M; Drake, MaryAnne

2016-07-01

Combinations of fresh liquid microfiltration retentate of skim milk, ultrafiltered retentate and permeate produced from microfiltration permeate, cream, and dried lactose monohydrate were used to produce a matrix of 20 milks. The milks contained 5 levels of casein as a percentage of true protein of about 5, 25, 50, 75, and 80% and 4 levels of true protein of 3.0, 3.76, 4.34, and 5.0% with constant lactose percentage of 5%. The experiment was replicated twice and repeated for both 1 and 2% fat content. Hunter color measurements, relative viscosity, and fat globule size distribution were measured, and a trained panel documented appearance and texture attributes on all milks. Overall, casein as a percentage of true protein had stronger effects than level of true protein on Hunter L, a, b values, relative viscosity, and fat globule size when using fresh liquid micellar casein concentrates and milk serum protein concentrates produced by a combination of microfiltration and ultrafiltration. As casein as a percentage of true protein increased, the milks became more white (higher L value), less green (lower negative a value), and less yellow (lower b value). Relative viscosity increased and d(0.9) generally decreased with increasing casein as a percentage of true protein. Panelists perceived milks with increasing casein as a percentage of true protein as more white, more opaque, and less yellow. Panelists were able to detect increased throat cling and mouthcoating with increased casein as a percentage of true protein in 2% milks, even when differences in appearance among milks were masked. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

The effect of explosive percentage on underwater explosion energy release of hexanitrohexaazaisowurtzitane and octogen based aluminized explosives

Directory of Open Access Journals (Sweden)

Qingjie Jiao

2018-03-01

Full Text Available To control the explosion energy output by optimizing explosive components is a key requirement in a number of different application areas. The effect of different Al/O Ratio on underwater explosion of aluminized explosives has been studied detailedly. However, the effect of explosive percentage in the same Al/O Ratio is rarely researched, especially for Hexanitrohexaazaisowurtzitane (CL-20 based aluminized explosives. In this study, we performed the underwater explosion experiments with 1.2-kilogram explosives in order to investigate the explosion energy released from CL-20 and Octogen (HMX based aluminized explosives. The percentage of the explosive varied from 5% to 30% and it is shown that: the shockwave peak pressure (pm grows gradually; shock wave energy (Es continues increasing, bubble energy (Eb increases then decreases peaking at 15% for both formulas, and the total energy (E and energy release rate (η peak at 20% for CL-20 and 15% for HMX. This paper outlines the physical mechanism of Eb change under the influence of an aluminium initial reaction temperature and reaction active detonation product percentage coupling. The result shows that CL-20 is superior as a new high explosive and has promising application prospects in the regulation of explosive energy output for underwater explosives.

The effect of explosive percentage on underwater explosion energy release of hexanitrohexaazaisowurtzitane and octogen based aluminized explosives

Science.gov (United States)

Jiao, Qingjie; Wang, Qiushi; Nie, Jianxin; Guo, Xueyong; Zhang, Wei; Fan, Wenqi

2018-03-01

To control the explosion energy output by optimizing explosive components is a key requirement in a number of different application areas. The effect of different Al/O Ratio on underwater explosion of aluminized explosives has been studied detailedly. However, the effect of explosive percentage in the same Al/O Ratio is rarely researched, especially for Hexanitrohexaazaisowurtzitane (CL-20) based aluminized explosives. In this study, we performed the underwater explosion experiments with 1.2-kilogram explosives in order to investigate the explosion energy released from CL-20 and Octogen (HMX) based aluminized explosives. The percentage of the explosive varied from 5% to 30% and it is shown that: the shockwave peak pressure (pm) grows gradually; shock wave energy (Es) continues increasing, bubble energy (Eb) increases then decreases peaking at 15% for both formulas, and the total energy (E) and energy release rate (η) peak at 20% for CL-20 and 15% for HMX. This paper outlines the physical mechanism of Eb change under the influence of an aluminium initial reaction temperature and reaction active detonation product percentage coupling. The result shows that CL-20 is superior as a new high explosive and has promising application prospects in the regulation of explosive energy output for underwater explosives.

Transaction costs and social networks in productivity measurement

DEFF Research Database (Denmark)

Henningsen, Geraldine; Henningsen, Arne; Henning, Christian H. C. A.

2015-01-01

. Hence, both the absolute productivity measures and, more importantly, the productivity ranking will be distorted. A major driver of transaction costs is poor access to information and contract enforcement assistance. Social networks often catalyse information exchange as well as generate trust...... and support. Hence, we use measures of a firm’s access to social networks as a proxy for the transaction costs the firm faces. We develop a microeconomic production model that takes into account transaction costs and networks. Using a data set of 384 Polish farms, we empirically estimate this model...... and compare different parametric, semiparametric, and nonparametric model specifications. Our results generally support our hypothesis. Especially, large trading networks and dense household networks have a positive influence on a farm’s productivity. Furthermore, our results indicate that transaction costs...

Integral measurements of neutron production in spallation targets

International Nuclear Information System (INIS)

Frehaut, J.; Deneuville, D.; Ledoux, X.; Lochard, J.P.; Longuet, J.L.; Petibon, E.; Alrick, K.; Bownan, D.; Cverna, F.; King, N.S.P.; Morgan, G.L.; Greene, G.; Hanson, A.; Snead, L.; Thompson, R.; Ward, T.

1998-01-01

Measurements of neutron production for thick iron, tungsten and lead targets of different diameter prototypic for spallation systems have been made at SATURNE in an incident proton energy range from 400 MeV to 2 GeV. TIERCE code system calculations are in good agreement with experiment for iron and large diameter tungsten and lead targets. They overestimate the measured neutron production for tungsten and lead targets for diameter ≤20 cm. (author)

The Role of Monocyte Percentage in Osteoporosis in Male Rheumatic Diseases.

Science.gov (United States)

Su, Yu-Jih; Chen, Chao Tung; Tsai, Nai-Wen; Huang, Chih-Cheng; Wang, Hung-Chen; Kung, Chia-Te; Lin, Wei-Che; Cheng, Ben-Chung; Su, Chih-Min; Hsiao, Sheng-Yuan; Lu, Cheng-Hsien

2017-11-01

Osteoporosis is easily overlooked in male patients, especially in the field of rheumatic diseases mostly prevalent with female patients, and its link to pathogenesis is still lacking. Attenuated monocyte apoptosis from a transcriptome-wide expression study illustrates the role of monocytes in osteoporosis. This study tested the hypothesis that the monocyte percentage among leukocytes could be a biomarker of osteoporosis in rheumatic diseases. Eighty-seven males with rheumatic diseases were evaluated in rheumatology outpatient clinics for bone mineral density (BMD) and surrogate markers, such as routine peripheral blood parameters and autoantibodies. From the total number of 87 patients included in this study, only 15 met the criteria for diagnosis of osteoporosis. Both age and monocyte percentage remained independently associated with the presence of osteoporosis. Steroid dose (equivalent prednisolone dose) was negatively associated with BMD of the hip area and platelet counts were negatively associated with BMD and T score of the spine area. Besides age, monocyte percentage meets the major requirements for osteoporosis in male rheumatic diseases. A higher monocyte percentage in male rheumatic disease patients, aged over 50 years in this study, and BMD study should be considered in order to reduce the risk of osteoporosis-related fractures.

On τ-Compactness of Products of τ-Measurable Operators

Science.gov (United States)

Bikchentaev, Airat M.

2017-12-01

Let M be a von Neumann algebra of operators on a Hilbert space H, τ be a faithful normal semifinite trace on M. We obtain some new inequalities for rearrangements of τ-measurable operators products. We also establish some sufficient τ-compactness conditions for products of selfadjoint τ-measurable operators. Next we obtain a τ-compactness criterion for product of a nonnegative τ-measurable operator with an arbitrary τ-measurable operator. We construct an example that shows importance of nonnegativity for one of the factors. The similar results are obtained also for elementary operators from M. We apply our results to symmetric spaces on (M, τ ). The results are new even for the *-algebra B(H) of all linear bounded operators on H endowed with the canonical trace τ = tr.

Measurement of beauty production from dimuon events at HERA

International Nuclear Information System (INIS)

2009-01-01

Beauty production in events containing two muons in the final state has been measured with the ZEUS detector at HERA using an integrated luminosity of 114 pb -1 . A low transverse-momentum threshold for muon identification, in combination with the large rapidity coverage of the ZEUS muon system, gives access to almost the full phase space for beauty production. The total cross section for beauty production in ep collisions at (s) 1/2 = 318 GeV has been measured to be σ tot (ep → b b-bar X) = 13.9 ± 1.5(stat.) +4.0 -4.3 (syst.) nb. Differential cross sections and a measurement of b b-bar correlations are also obtained, and compared to other beauty cross-section measurements, Monte Carlo models and next-to-leading-order QCD predictions.

Quantifying risk: the role of absolute and relative measures in interpreting risk of adverse reactions from product labels of antipsychotic medications.

Science.gov (United States)

Citrome, Leslie

2009-09-01

Pharmaceutical product labeling as approved by regulatory agencies include statements of adverse event risk. Product labels include descriptive statements such as whether events are uncommon or rare, as well as percentage occurrence for more common events. In addition tables are provided with the frequencies of the latter events for both product and placebo as observed in clinical trials. Competing products are not mentioned in a specific drug's product labeling but indirect comparisons can be made using the corresponding label information for the alternate product. Two types of tools are easily used for this purpose: absolute measures such as number needed to harm (NNH), and relative measures such as relative risk increase (RRI). The calculations for both of these types of quantitative measures are presented using as examples the oral first-line second-generation antipsychotic medications. Among three sample outcomes selected a priori, akathisia, weight gain, and discontinuation from a clinical trial because of an adverse reaction, there appears to be differences among the different antipsychotics versus placebo. Aripiprazole was associated with the highest risk for akathisia, particularly when used as adjunctive treatment of major depressive disorder (NNH 5, 95% CI 4-7; RRI 525%, 95% CI 267%-964%). Although insufficient information was available in product labeling to calculate the CI, olanzapine was associated with the highest risk for weight gain of at least 7% from baseline (NNH 6, RRI 640% for adults; NNH 4, RRI 314% for adolescents), and quetiapine for the indication of bipolar depression was associated with the highest risk of discontinuation from a clinical trial because of an adverse reaction (NNH 8, RRI 265% for 600 mg/d; NNH 15, RRI 137% for 300 mg/d). In conclusion, with certain limitations, it is possible for the clinician to extract information from medication product labeling regarding the frequency with which certain adverse reactions can be

Measures for Increasing of Company’s Production Capacity

Directory of Open Access Journals (Sweden)

Ernesta Žikevičiūtė

2012-07-01

Full Text Available Production capacity improvements are poorly explored areas of economic literature and the existing methods are difficult to apply. For this reason, the organization has only a superficial analysis of capacity, but after all this time, each production company had to improve the production capacity for the market economy and the most economical use of production factors.This article explores the company’s production capacity for better use of tools. It also presents the capacity of their concept, establishment, evaluates the factors leading to their production capacity, for developing efficiency measures and model presentation.Article in Lithuanian

Control of polysilicon on-film particulates with on-product measurements

Science.gov (United States)

Barker, Judith B.; Chain, Elizabeth E.; Plachecki, Vincent E.

1997-08-01

Historically, a number of in-line particle measurements have been performed on separate test wafers included with product wafers during polysilicon processes. By performing film thickness and particulate measurements directly on product wafers, instead, a number of benefits accrue: (1) reduced test wafer usage, (2) reduced test wafer storage requirements, (3) reduced need for equipment to reclaim test wafers, (4) reduced need for direct labor to reclaim test wafers, and (5) reduced engineering 'false alarms' due to incorrectly processed test wafers. Implementation of on-product measurements for the polysilicon diffusion process required a number of changes in both philosophy and methodology. We show the necessary steps to implementation of on-product particle measurements with concern for overall manufacturing efficiency and the need to maintain appropriate control. Particle results from the Tencor 7600 Surfscan are presented.

PERCENTAGE OF VIABLE SPERMATOZOA COLLECTED FROM THE EPIDIDYMES OF DEATH LOCAL DOG

Directory of Open Access Journals (Sweden)

I Nyoman Sulabda

2012-11-01

Full Text Available The purpose of this study to determine the effectof post mortem time on percentage of lifeepididymessperm from postmortem dog caudae epididymides. A total of 9 dog were usedand divided into three group. T0 was control group, T1, 3 hours postmortem and T2, 6hours postmortem. This way, samples were obtained at different times postmortem. Spermwere extracted from the caudae epididymes by means of cuts.The result showed that the percentage of life sperm were 67,16 ± 5.67(T0, 46.33 ± 5.60(T1 and 24.00 ± 4.35 respectively. We could appreciate that percentage of life wasaffected by postmortem time. There was significant decrease life sperm recovered fromepididymes postmortem (P<0.01. In conclusion, epididymes sperm from dog undergodecrease of percentage of life, but it could stay acceptable within many hours postmortem.We intepreted these data to indicate that it may still be possible to obtain viablespermatozoa many hours later.

Tunnel production enhances quality in organic carrot seed production

DEFF Research Database (Denmark)

Deleuran, L C; Boelt, B

2009-01-01

production of open-pollinated carrot varieties increased the yield and germination percentages when compared with normal field conditions. Yield was in the range of 100-250 g and 2-17 g seeds m-2 respectively, and germination percentage was 84-95 and 43-55, respectively. However, hybrid carrot seed...... production showed lower yields than did their open-pollinated counterparts. Yields ranging from 60-123 g seeds m-2 can be obtained, but the production needs to be carefully planned and monitored. Different growing systems in tunnels have been studied in both open-pollinated and hybrid carrot (Daucus carota L......In Denmark, organic vegetable seed production is possible for some of the late-maturing species when the maturing is performed in lightweight tunnels which are also relevant for the isolation of small-scale production. The tunnel system offers several advantages, e.g., it is possible to control...

Measurement of beauty production from dimuon events at HERA

Energy Technology Data Exchange (ETDEWEB)

Chekanov, S.; Derrick, M.; Magill, S. [Argonne National Laboratory, Argonne, IL (United States)] (and others)

2008-09-15

Beauty production in events containing two muons in the final state has been measured with the ZEUS detector at HERA using an integrated luminosity of 114 pb{sup -1}. A low transverse-momentum threshold for muon identification, in combination with the large rapidity coverage of the ZEUS muon system, gives access to almost the full phase space for beauty production. The total cross section for beauty production in ep collisions at {radical}(s) = 318 GeV has been measured to be {sigma}{sub tot}(ep {yields} b anti bX) = 13.9 {+-} 1.5(stat.){sub -4.3}{sup +4.0}(syst.) nb. Differential cross sections and a measurement of b anti b correlations are also obtained, and compared to other beauty cross-section measurements, Monte Carlo models and next-to-leading-order QCD predictions. (orig.)

Bosch Reactor Development for High Percentage Oxygen Recovery from Carbon Dioxide

Science.gov (United States)

Howard, David; Abney, Morgan

2015-01-01

This next Generation Life Support Project entails the development and demonstration of Bosch reaction technologies to improve oxygen recovery from metabolically generated oxygen and/or space environments. A primary focus was placed on alternate carbon formation reactor concepts to improve useful catalyst life for space vehicle applications, and make use of in situ catalyst resources for non-terrestrial surface missions. Current state-of-the-art oxygen recovery systems onboard the International Space Station are able to effectively recover approximately 45 percent of the oxygen consumed by humans and exhausted in the form of carbon dioxide (CO2). Excess CO2 is vented overboard and the oxygen contained in the molecules is lost. For long-duration missions beyond the reaches of Earth for resupply, it will be necessary to recover greater amounts of constituents such as oxygen that are necessary for sustaining life. Bosch technologies theoretically recover 100 percent of the oxygen from CO2, producing pure carbon as the sole waste product. Challenges with this technology revolve around the carbon product fouling catalyst materials, drastically limiting catalyst life. This project successfully demonstrated techniques to extend catalyst surface area exposure times to improve catalyst life for vehicle applications, and demonstrated the use of Martian and lunar regolith as viable catalyst Bosch Reactor Development for High Percentage Oxygen Recovery From Carbon Dioxide materials for surface missions. The Bosch process generates carbon nanotube formation within the regolith, which has been shown to improve mechanical properties of building materials. Production of bricks from post reaction regolith for building and radiation shielding applications were also explored.

EFFECT OF ADDING AN EXERCISE REGIMEN TO DIET THERAPY IN DECREASING BODY FAT PERCENTAGE AND BODY MASS INDEX AMONG OBESE FEMALES

Directory of Open Access Journals (Sweden)

Rajeena Haneefa

2017-10-01

Full Text Available BACKGROUND Obesity is one among the leading health problems in many developing countries including India. Lifestyle modifications, which include diet therapy and regular exercises are considered as the mainstay in the management of this health issue. Brisk walking is the preferred socially and economically acceptable mode of exercise. This randomised controlled trial tries to evaluate the efficacy of adding an exercise regimen to diet therapy in reducing body fat percentage and Body Mass Index (BMI among obese females. MATERIALS AND METHODS One hundred female patients aged between 20 and 60 years with BMI greater than 25 were recruited for this study of 6 months duration. Participants were randomised into either diet therapy alone group or diet therapy with exercise group. All participants were prescribed a low-calorie diet of 1500 kcal per day. The exercise intervention group was subjected to a home-based exercise regimen; walking for 30 minutes 5 days a week. Outcomes were measured by BMI and body fat percentage, documented every month. RESULTS Both groups showed significant reduction in body fat percentage and BMI, but the reduction was more in the exercise with diet therapy group (p value <0.001. CONCLUSION Adding a simple exercise like walking to other lifestyle modification measures can more efficiently bring down BMI and body fat percentage in turn significantly reducing the cardiovascular risk, morbidity and mortality in women.

7 CFR 987.44 - Free and restricted percentages.

Science.gov (United States)

2010-01-01

... Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... applicable grade and size available to supply the trade demand for free dates of any variety is likely to be... effectuate the declared policy of the act, it shall recommend such percentages to the Secretary. If the...

Mathematical model for body fat percentage of children with cerebral palsy

Directory of Open Access Journals (Sweden)

Eduardo Borba Neves

Full Text Available Abstract Introduction The aim of this study was to develop a specific mathematical model to estimate the body fat percentage (BF% of children with cerebral palsy, based on a Brazilian population of patients with this condition. Method This is a descriptive cross-sectional study. The study included 63 Caucasian children with cerebral palsy, both males and females, aged between three and ten-years-old. Participants were assessed for functional motor impairment using the Gross Motor Function Classification System (GMFCS, dual energy x-ray absorptiometry (DXA and skinfold thickness. Total body mass (TBM and skinfolds thickness from: triceps (Tr, biceps (Bi, Suprailiac (Si, medium thigh (Th, abdominal (Ab, medial calf (Ca and subscapular (Se were collected. Fat mass (FM was estimated by dual energy x-ray absorptiometry (gold standard. Results The model was built from multivariate linear regression; FM was set as a dependent variable and other anthropometric variables, age and sex, were set as independent variables. The final model was established as F%=((0.433xTBM + 0.063xTh + 0.167xSi - 6.768 ÷ TBM × 100, the R2 value was 0.950, R2adjusted=0.948 and the standard error of estimate was 1.039 kg. Conclusion This method was shown to be valid to estimate body fat percentage of children with cerebral palsy. Also, the measurement of skinfolds on both sides of the body showed good results in this modelling.

Development of an instrument for direct ozone production rate measurements: measurement reliability and current limitations

Science.gov (United States)

Sklaveniti, Sofia; Locoge, Nadine; Stevens, Philip S.; Wood, Ezra; Kundu, Shuvashish; Dusanter, Sébastien

2018-02-01

Ground-level ozone (O3) is an important pollutant that affects both global climate change and regional air quality, with the latter linked to detrimental effects on both human health and ecosystems. Ozone is not directly emitted in the atmosphere but is formed from chemical reactions involving volatile organic compounds (VOCs), nitrogen oxides (NOx = NO + NO2) and sunlight. The photochemical nature of ozone makes the implementation of reduction strategies challenging and a good understanding of its formation chemistry is fundamental in order to develop efficient strategies of ozone reduction from mitigation measures of primary VOCs and NOx emissions. An instrument for direct measurements of ozone production rates (OPRs) was developed and deployed in the field as part of the IRRONIC (Indiana Radical, Reactivity and Ozone Production Intercomparison) field campaign. The OPR instrument is based on the principle of the previously published MOPS instrument (Measurement of Ozone Production Sensor) but using a different sampling design made of quartz flow tubes and a different Ox (O3 and NO2) conversion-detection scheme composed of an O3-to-NO2 conversion unit and a cavity attenuated phase shift spectroscopy (CAPS) NO2 monitor. Tests performed in the laboratory and in the field, together with model simulations of the radical chemistry occurring inside the flow tubes, were used to assess (i) the reliability of the measurement principle and (ii) potential biases associated with OPR measurements. This publication reports the first field measurements made using this instrument to illustrate its performance. The results showed that a photo-enhanced loss of ozone inside the sampling flow tubes disturbs the measurements. This issue needs to be solved to be able to perform accurate ambient measurements of ozone production rates with the instrument described in this study. However, an attempt was made to investigate the OPR sensitivity to NOx by adding NO inside the instrument

Analyzing production potential of selected food and legume crops for food security in Punjab, Pakistan

International Nuclear Information System (INIS)

Qasim, M.; Hassan, S.; Bashir, A.; Mehmood, I.; Mahmood, H. Z.

2015-01-01

The present study was designed to assess growth rate in area, yield and production of selected major food commodities and to project these parameters on the basis of estimated growth co-efficient. Time-series data for area, yield and production were collected for wheat, sugarcane, rice, mung and gram since 1980-81. The semi-log trend function was employed to find out the growth rate of selected commodities. The findings of the study showed the positive growth rates of area, production and yield of all selected food grain and legume crops. The estimated co-efficient for all growth models (area, production and yield) of selected commodities were statistically highly significant at 1 percentage level except yield of gram which was significant at 10 percentage level. The estimated annual growth rate of area for wheat, rice and sugarcane was 0.9 percentage, 2.1 percentage and 0.8 percentage, respectively with the production growth of 3.0 percentage, 3.8 percentage and 2.2 percentage, respectively and yield growth of 2.1 percentage, 1.6 percentage and 1.5 percentage, respectively. The results highlighted that the major contribution for expansion in production for rice and sugarcane was area while it was yield for wheat. In this scenario the wheat production can be enhanced by increasing its area than that of rice and sugarcane. The annual growth rate for gram and mung area was estimated about 1.0 v and 4.9 percentage, respectively, with the production growth rate of 2.3 percentage and 6.4 percentage while yield growth rate of 2.9 percentage and 1.4 percentage, respectively. Keeping in view the higher growth of gram yield the increase in its area may enhance its production more than that of mung. The proportionate higher increase in the area of wheat and gram may enhance the welfare of producers in particular and provide food security to masses in general. (author)

Measures to Evaluate the Effects of DBS on Speech Production

Science.gov (United States)

Weismer, Gary; Yunusova, Yana; Bunton, Kate

2011-01-01

The purpose of this paper is to review and evaluate measures of speech production that could be used to document effects of Deep Brain Stimulation (DBS) on speech performance, especially in persons with Parkinson disease (PD). A small set of evaluative criteria for these measures is presented first, followed by consideration of several speech physiology and speech acoustic measures that have been studied frequently and reported on in the literature on normal speech production, and speech production affected by neuromotor disorders (dysarthria). Each measure is reviewed and evaluated against the evaluative criteria. Embedded within this review and evaluation is a presentation of new data relating speech motions to speech intelligibility measures in speakers with PD, amyotrophic lateral sclerosis (ALS), and control speakers (CS). These data are used to support the conclusion that at the present time the slope of second formant transitions (F2 slope), an acoustic measure, is well suited to make inferences to speech motion and to predict speech intelligibility. The use of other measures should not be ruled out, however, and we encourage further development of evaluative criteria for speech measures designed to probe the effects of DBS or any treatment with potential effects on speech production and communication skills. PMID:24932066

The iMTA Productivity Cost Questionnaire: A Standardized Instrument for Measuring and Valuing Health-Related Productivity Losses.

Science.gov (United States)

Bouwmans, Clazien; Krol, Marieke; Severens, Hans; Koopmanschap, Marc; Brouwer, Werner; Hakkaart-van Roijen, Leona

2015-09-01

Productivity losses often contribute significantly to the total costs in economic evaluations adopting a societal perspective. Currently, no consensus exists on the measurement and valuation of productivity losses. We aimed to develop a standardized instrument for measuring and valuing productivity losses. A group of researchers with extensive experience in measuring and valuing productivity losses designed an instrument suitable for self-completion, building on preknowledge and evidence on validity. The instrument was designed to cover all domains of productivity losses, thus allowing quantification and valuation of all productivity losses. A feasibility study was performed to check the questionnaire's consistency and intelligibility. The iMTA Productivity Cost Questionnaire (iPCQ) includes three modules measuring productivity losses of paid work due to 1) absenteeism and 2) presenteeism and productivity losses related to 3) unpaid work. Questions for measuring absenteeism and presenteeism were derived from existing validated questionnaires. Because validated measures of losses of unpaid work are scarce, the questions of this module were newly developed. To enhance the instrument's feasibility, simple language was used. The feasibility study included 195 respondents (response rate 80%) older than 18 years. Seven percent (n = 13) identified problems while filling in the iPCQ, including problems with the questionnaire's instructions and routing (n = 6) and wording (n = 2). Five respondents experienced difficulties in estimating the time that would be needed for other people to make up for lost unpaid work. Most modules of the iPCQ are based on validated questions derived from previously available instruments. The instrument is understandable for most of the general public. Copyright © 2015 International Society for Pharmacoeconomics and Outcomes Research (ISPOR). Published by Elsevier Inc. All rights reserved.

Quantificação da falha na madeira em juntas coladas utilizando técnicas de visão artificial Measuring wood failure percentage using a machine vision system

Directory of Open Access Journals (Sweden)

Christovão Pereira Abrahão

2003-02-01

Full Text Available Com o emprego de adesivos pode-se obter um grande número de produtos derivados da madeira. Para confecção industrial de produtos de madeira colada, normas reconhecidas internacionalmente exigem que a adesão da madeira seja testada segundo procedimentos padronizados e que nos resultados destes testes seja reportado, além da resistência das juntas, o porcentual de falha na madeira. Para avaliação da falha a norma ASTM D5266-99 recomenda o emprego de uma rede de quadrículas traçada sobre um material transparente. Contudo, esta avaliação, além de demandar muito tempo, ainda é realizada com muita subjetividade. A hipótese do presente trabalho é que se pode quantificar a falha na madeira com um sistema de visão artificial, tornando o procedimento mais rápido e menos sujeito à subjetividade. Foram testados dois tipos de algoritmos de limiarização automática em imagens adquiridas com digitalizadores de mesa. Concluiu-se que a falha na madeira pode ser quantificada por limiarização automática em substituição ao método convencional das quadrículas. Os algoritmos testados apresentaram erro médio absoluto menor que 3% em relação ao sistema convencional da rede quadriculada.It is possible to obtain several products by glueing wood. Internationally approved standards require wood adhesion to be tested according to standardized procedures, including in the results, shear stress and wood failure percentages. In order to estimate wood failure percentage, the ASTM D5266-99 standard suggests the use of a grid template printed on a transparent sheet. However, this evaluation is not only time-consuming but also subjective. This work developed and tested an algorithm to quantify the flawed wood areas by using a machine vision system, a faster and less subjective procedure. Two types of automatic threshold algorithms were tested. The glued wood samples were scanned after the shear tests under compression. It was concluded that automatic

Di-boson production measurements with the ATLAS detector

CERN Document Server

Chevalier, Laurent; The ATLAS collaboration

2015-01-01

Measurements diboson production cross sections in proton-proton interactions at 7 and 8 TeV are reported from the ATLAS experiment. The cross section results are measured in phase space regions defined by the decay kinematics and then extrapolated to the full phase spaces. Cross sections for WV (V=W or Z) production in the leptonic or semileptonic channels are compared to (N)NLO predictions of the Standard Model and are used to place constraints on anomalous triple-gauge-boson couplings. First LHC Run-2 results will be included if available.

Gender- and Gestational Age-Specific Body Fat Percentage at Birth.

LENUS (Irish Health Repository)

Hawkes, Colin P

2011-08-08

Background: There is increasing evidence that in utero growth has both immediate and far-reaching influence on health. Birth weight and length are used as surrogate measures of in utero growth. However, these measures poorly reflect neonatal adiposity. Air-displacement plethysmography has been validated for the measurement of body fat in the neonatal population. Objective: The goal of this study was to show the normal reference values of percentage body fat (%BF) in infants during the first 4 days of life. Methods: As part of a large population-based birth cohort study, fat mass, fat-free mass, and %BF were measured within the first 4 days of life using air-displacement plethsymography. Infants were grouped into gestational age and gender categories. Results: Of the 786 enrolled infants, fat mass, fat-free mass, and %BF were measured in 743 (94.5%) infants within the first 4 days of life. %BF increased significantly with gestational age. Mean (SD) %BF at 36 to 37 weeks\\' gestation was 8.9% (3.5%); at 38 to 39 weeks\\' gestation, 10.3% (4%); and at 40 to 41 weeks\\' gestation, 11.2% (4.3%) (P < .001). Female infants had significantly increased mean (SD) %BF at 38 to 39(11.1% [3.9%] vs 9.8% [3.9%]; P = .012) and at 40 to 41 (12.5% [4.4%] vs 10% [3.9%]; P < .001) weeks\\' gestation compared with male infants. Gender- and gestational age-specific centiles were calculated, and a normative table was generated for reference. Conclusion: %BF at birth is influenced by gestational age and gender. We generated accurate %BF centiles from a large population-based cohort.

Measuring the coolness of interactive products

DEFF Research Database (Denmark)

Bruun, Anders; Raptis, Dimitrios; Kjeldskov, Jesper

2016-01-01

Coolness has recently started to be explored as a design goal for interactive products from practitioners as well as researchers within human–computer interaction (HCI), but there is still a need to further operationalise the concept and explore how we can measure it. Our contribution in this paper...

Flexibility of production systems and prepare-finish time

Directory of Open Access Journals (Sweden)

Vukićević Milan R.

2006-01-01

Full Text Available One of the specificities of the large-serial and mass production is the almost neglected percentage of prepare-finish time in the production cycle. In the conditions of today dominant discontinuous production, it becomes a significant element of the production cycle. The eastern (Japan doctrine of increasing the flexibility of the production systems, is based inter alia also on the extreme reduction of the prepare-finish time. For this reason, the aim of this study was to identify the types and percentages of individual jobs within the group of prepare-finish jobs. The sample consisted of 3 (three production systems for the production of joinery, with the discontinuous production system. The research shows that the percentage of time of the jobs installation of work instruments, regulation of processing regime, and removal of work instruments is extremely long and that it ranges between 11.83% and 18.93% of the shift time. The reasons of the high percentage of these jobs are the wide range of products and the absence of the rationalisation of prepare-finish jobs. Within the efforts to minimize the effects of disruption and to increase the flexibility of the production systems, the rationalisation of prepare-finish jobs is the unavoidable condition.

Implications of energy efficiency measures in wheat production

DEFF Research Database (Denmark)

Meyer-Aurich, Andreas; Ziegler, T.; Scholz, L.

The economic and environmental effect of energy saving measures were analyzed for a typical wheat production system in Germany. The introduction of precision farming, reduced nitrogen fertilization and improved crop drying technologies proved to be efficient measures for enhancing energy efficiency...

Analytical measurements of fission products during a severe nuclear accident

Science.gov (United States)

Doizi, D.; Reymond la Ruinaz, S.; Haykal, I.; Manceron, L.; Perrin, A.; Boudon, V.; Vander Auwera, J.; tchana, F. Kwabia; Faye, M.

2018-01-01

The Fukushima accident emphasized the fact that ways to monitor in real time the evolution of a nuclear reactor during a severe accident remain to be developed. No fission products were monitored during twelve days; only dose rates were measured, which is not sufficient to carry out an online diagnosis of the event. The first measurements were announced with little reliability for low volatile fission products. In order to improve the safety of nuclear plants and minimize the industrial, ecological and health consequences of a severe accident, it is necessary to develop new reliable measurement systems, operating at the earliest and closest to the emission source of fission products. Through the French program ANR « Projet d'Investissement d'Avenir », the aim of the DECA-PF project (diagnosis of core degradation from fission products measurements) is to monitor in real time the release of the major fission products (krypton, xenon, gaseous forms of iodine and ruthenium) outside the nuclear reactor containment. These products are released at different times during a nuclear accident and at different states of the nuclear core degradation. Thus, monitoring these fission products gives information on the situation inside the containment and helps to apply the Severe Accident Management procedures. Analytical techniques have been proposed and evaluated. The results are discussed here.

Analytical measurements of fission products during a severe nuclear accident

Directory of Open Access Journals (Sweden)

Doizi D.

2018-01-01

Full Text Available The Fukushima accident emphasized the fact that ways to monitor in real time the evolution of a nuclear reactor during a severe accident remain to be developed. No fission products were monitored during twelve days; only dose rates were measured, which is not sufficient to carry out an online diagnosis of the event. The first measurements were announced with little reliability for low volatile fission products. In order to improve the safety of nuclear plants and minimize the industrial, ecological and health consequences of a severe accident, it is necessary to develop new reliable measurement systems, operating at the earliest and closest to the emission source of fission products. Through the French program ANR « Projet d’Investissement d’Avenir », the aim of the DECA-PF project (diagnosis of core degradation from fission products measurements is to monitor in real time the release of the major fission products (krypton, xenon, gaseous forms of iodine and ruthenium outside the nuclear reactor containment. These products are released at different times during a nuclear accident and at different states of the nuclear core degradation. Thus, monitoring these fission products gives information on the situation inside the containment and helps to apply the Severe Accident Management procedures. Analytical techniques have been proposed and evaluated. The results are discussed here.

Productivity benefits of industrial energy efficiency measures

Energy Technology Data Exchange (ETDEWEB)

Worrell, Ernst; Laitner, John A.; Michael, Ruth; Finman, Hodayah

2004-08-30

We review the relationship between energy efficiency improvement measures and productivity in industry. We review over 70 industrial case studies from widely available published databases, followed by an analysis of the representation of productivity benefits in energy modeling. We propose a method to include productivity benefits in the economic assessment of the potential for energy efficiency improvement. The case-study review suggests that energy efficiency investments can provide a significant boost to overall productivity within industry. If this relationship holds, the description of energy-efficient technologies as opportunities for larger productivity improvements has significant implications for conventional economic assessments. The paper explores the implications this change in perspective on the evaluation of energy-efficient technologies for a study of the iron and steel industry in the US. This examination shows that including productivity benefits explicitly in the modeling parameters would double the cost-effective potential for energy efficiency improvement, compared to an analysis excluding those benefits. We provide suggestions for future research in this important area.

Optimal Adaptive Statistical Iterative Reconstruction Percentage in Dual-energy Monochromatic CT Portal Venography.

Science.gov (United States)

Zhao, Liqin; Winklhofer, Sebastian; Yang, Zhenghan; Wang, Keyang; He, Wen

2016-03-01

The aim of this article was to study the influence of different adaptive statistical iterative reconstruction (ASIR) percentages on the image quality of dual-energy computed tomography (DECT) portal venography in portal hypertension patients. DECT scans of 40 patients with cirrhosis (mean age, 56 years) at the portal venous phase were retrospectively analyzed. Monochromatic images at 60 and 70 keV were reconstructed with four ASIR percentages: 0%, 30%, 50%, and 70%. Computed tomography (CT) numbers of the portal veins (PVs), liver parenchyma, and subcutaneous fat tissue in the abdomen were measured. The standard deviation from the region of interest of the liver parenchyma was interpreted as the objective image noise (IN). The contrast-noise ratio (CNR) between PV and liver parenchyma was calculated. The diagnostic acceptability (DA) and sharpness of PV margins were obtained using a 5-point score. The IN, CNR, DA, and sharpness of PV were compared among the eight groups with different keV + ASIR level combinations. The IN, CNR, DA, and sharpness of PV of different keV + ASIR groups were all statistically different (P ASIR and 70 keV + 0% ASIR (filtered back-projection [FBP]) combination, respectively, whereas the largest and smallest objective IN were obtained in the 60 keV + 0% ASIR (FBP) and 70 keV + 70% combination. The highest DA and sharpness values of PV were obtained at 50% ASIR for 60 keV. An optimal ASIR percentage (50%) combined with an appropriate monochromatic energy level (60 keV) provides the highest DA in portal venography imaging, whereas for the higher monochromatic energy (70 keV) images, 30% ASIR provides the highest image quality, with less IN than 60 keV with 50% ASIR. Copyright © 2015 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

Measurement of Single-top Quark Production with the ATLAS Detector

CERN Document Server

Holzbauer, J L

2011-01-01

Single-top production has been studied with the ATLAS detector using 0.7 fb-1 of 2011 data recorded at 7 TeV center-of-mass energy. The measurement of electroweak production of top-quarks allows probes of the Wtb vertex and a direct measurement of the CKM matrix element |V_tb|. It is also expected to be sensitive to new physics such as flavor changing neutral currents or heavy W production. The t-channel cross-section measurements are performed using both a cut-based and neural network approach, while a cut-based selection in the dilepton channel is used to derive a limit on the associated (Wt) production. An observed cross-section of 90 +32 -22 pb (65 +28 -19 pb expected) is obtained for the t-channel, which is consistent with the Standard Model expectation. For the Wt production, an observed limit of < 39.1 pb (40.6 pb expected) is derived, which corresponds to about 2.5 times the Standard Model expectation.

Thickness measuring instrument for rubber cord calender production

International Nuclear Information System (INIS)

Ye Songfeng

1988-01-01

The thickness measuring gauge has been used to measure the rubber film thickness on the coating of textile cord at tire four cord calenders. Combined with micro-computer it completes the automatic control system and acheives automatic thickness measurement and adjustment. The fundamentals, construction, specifications, characteristic and application results are described. Prominent economic benefit has been gained for tire production

Quantitative trait locus (QTL) analysis of percentage grains ...

African Journals Online (AJOL)

user

2011-03-28

Mar 28, 2011 ... ATA/M-CGT; (B) AFLP results using primer E-AAA/M-CTC; (C) AFLP results using primer E-AAA/M-CTA. 1,. Minghui63; 2, Zhengshan97A; 3, low PGC bulk; 4, high PGC bulk. The arrow show linkage segments of percentage chalky grain in rice. Table 1. Chromosomal location of AFLP segments linked to ...

Budgetary Approach to Project Management by Percentage of Completion Method

Directory of Open Access Journals (Sweden)

Leszek Borowiec

2011-07-01

Full Text Available Efficient and effective project management process is made possible by the use of methods and techniques of project management. The aim of this paper is to present the problems of project management by using Percentage of Completion method. The research material was gathered based on the experience in implementing this method by the Johnson Controls International Company. The article attempts to demonstrate the validity of the thesis that the POC project management method, allows for effective implementation and monitoring of the project and thus is an effective tool in the managing of companies which exploit the budgetary approach. The study presents planning process of basic parameters affecting the effectiveness of the project (such as costs, revenue, margin and characterized how the primary measurements used to evaluate it. The present theme is illustrating by numerous examples for showing the essence of the raised problems and the results are presenting by using descriptive methods, graphical and tabular.

Measurement of the perceived quality of a product

Directory of Open Access Journals (Sweden)

Maire J.-L.

2013-01-01

Full Text Available For some companies, visual inspection has become an essential step when seeking to improve the quality of their products. The aim of this control is to be sure of the perceived quality of the product, which often goes well beyond the quality expected by the customer. For this type of control, the controller should be able to detect any anomaly on a product, characterize this anomaly, and then evaluate it in order to decide if the product should be accepted or rejected. This paper describes how this characterization can be carried out and, more specifically, how to measure the impact of the local environment of an anomaly on the perceived quality of the product.

ALICE measurements of heavy-flavour production at the LHC

CERN Multimedia

CERN. Geneva

2012-01-01

The measurement of open charm and beauty production in Pb-Pb collisions at the LHC gives access to the mechanisms of heavy-quark transport and energy loss in hot and dense QCD matter. The ALICE apparatus allows us to measure heavy flavour particles over a wide acceptance, using hadronic and electronic final states at central rapidity and muonic final states at forward rapidity, in both cases with coverage down to low transverse momentum. These measurements, in pp collisions, besides constituting the reference for the heavy-ion studies, provide acceptance-wise unique information on heavy-quark production at LHC energies. After presenting results for pp collisions at centre-of-mass energies of 2.76 and 7 TeV, we focus on the observation of the suppression of heavy-flavour production in central Pb-Pb collisions and of the azimuthal anisotropy of charmed hadrons in semi-central collisions at 2.76 TeV.

Bioconversion of Agricultural By-Products to Lysin by brevibacterium flavum and physico-chemical optimization for hyper-production

International Nuclear Information System (INIS)

Irshad, S.; Hashmi, A. S.; Babar, M. E.; Awan, A. R.; Anjum, A. A.; Javed, M. M.

2015-01-01

Poultry and agriculture industry has a great role in the development of food sector in Pakistan. Whole of the Lysine required for poultry feed is imported to fulfil the desired dietary needs. Present study was designed to utilize different agricultural by-products like molasses, wheat bran, rice polishing and corn steep liquor. Different Physico-Chemical parameters were optimized to have hyper-production of Lysine through fermentation by using Brevibacterium flavum as a fermentative agent. From wheat bran, rice polishing and molasses (as best carbon source), significantly high concentrations of lysine (10.4 g/L) after 72h of incubation was observed with molasses (4 percentage) with 3 percentage (v/v) inoculum size at 30 degree C and pH 7. Among different nitrogen sources, 0.25 percentage (NH/sub 4/)2SO/sub 4/ showed significantly (P< 0.05) high yield of Lysine (16.89 g/L). Addition of different optimum levels of ionic salts; 4 percentage CaCO/sub 3/, 0.4 percentage MgSO/sub 4/.7H/sub 2/O, 0.1 percentage NaCl and 0.2 percentage KH/sub 2/PO/sub 4/ gave significantly (P< 0.05) higher quantity of Lysine 19.01 g/L. Inclusion of 0.6 percentage corn steep liquor and 0.4 mg/100mL biotin significantly (P< 0.05) raised the Lysine from 19.4 g/L - 19.45 g/L. The presence of Lysine in fermented broth was detected by TLC. Thus a cheap and practical bioprocess of Lysine production was concluded, that can be exploited commercially to save foreign exchange. (author)

Measurement of Scientific Productivity in R&D Sector: Changing paradigm.

Science.gov (United States)

Kumar, Abhishek; Srivastava, Alpana; Kumar, R P Jeevan; Tiwari, Rajesh K

2017-01-01

Scientific Productivity is a demand of policy makers for a judicious utilization of massive R&D budget allocated and utilized. A huge mass of intellectual assets is employed, which after investing manpower, infrastructure and lab consumables demand for a major outcome which contributes towards building nation's economy. Scientific productivity was only measured through publications or patents. Patents, earmarked as a strong parameter for innovation generation, where, Word Intellectual Property Organisation generated a data on applications for the top 20 offices for patents, where Australia, Brazil and Canada occupied top 3 positions. India ranked 9th with the total patent applications rising from 39762 (2010) to 42854 (2014) i.e. 15%, whereas, it contributes around 2% Patents (innovative productivity) on global scale. Many studies have come forward interestingly within scientific and academic domains in the form of measurement of scientific performance, however, development of productivity indicators and calculation of Scientific Productivity (SP) as a holistic evaluation system is a significant demand. SP, a herculean task is envisaged for productivity analysis and would submit significant factors towards fabricating an effective measurement engine in a holistic manner viable for an individual and organization, being supplementary to each other. This review projects the significance of performance measurement system in R&D through identification and standardization of key parameters. It also includes emphasis on inclusion of standardized parameters, effective for performance measurement which is applicable for scientists, technical staff as well as lab as a facility. This review aims at providing an insight to the evaluators, policy makers, and high level scientific panels to stimulate the scientific intellects on identified indicators so that their work proceeds to generate productive outcome contributing to the economic growth. Copyright© Bentham Science

Effect of embryo culture media on percentage of males at birth.

Science.gov (United States)

Zhu, Jinliang; Zhuang, Xinjie; Chen, Lixue; Liu, Ping; Qiao, Jie

2015-05-01

Does embryo culture medium influence the percentage of males at birth? The percentage of males delivered after ICSI cycles using G5™ medium was statistically significantly higher than after cycles where Global, G5™ PLUS, and Quinn's Advantage Media were used. Male and female embryos have different physiologies during preimplantation development. Manipulating the energy substrate and adding growth factors have a differential impact on the development of male and female embryos. This was a retrospective analysis of the percentage of males at birth, and included 4411 singletons born from fresh embryo transfer cycles between January 2011 and August 2013 at the Center for Reproductive Medicine of Third Hospital Peking University. Only singleton gestations were included. Participants were excluded if preimplantation genetic diagnosis, donor oocytes and donor sperm were used. The database between January 2011 and August 2013 was searched with unique medical record number, all patients were present in the database with only one cycle. Demographics, cycle characteristics and the percentage of male babies in the four culture media groups were compared with analysis of variance or χ(2) tests. Multivariable logistic regression was done to determine the association between the sex at birth and culture media after adjusting for other confounding factors, including parental age, parental BMI, type of infertility, parity, number of embryos transferred, number of early gestational sacs, cycles with testicular sperm aspiration (TESA)/percutaneous epididymal sperm aspiration (PESA)/testicular sperm extraction (TESE), number of oocytes retrieved, cycles with blastocyst transfers, and gestational age within ICSI group. Within the IVF group, the percentage of males at birth for G5™, Global, Quinn's and G5™ PLUS media were comparable (P > 0.05); however, within the ICSI group, the percentage of male babies in cycles using G5™(56.1%) was statistically significantly higher than

20 CFR 225.42 - Notice of the percentage amount of a cost-of-living increase.

Science.gov (United States)

2010-04-01

... THE RAILROAD RETIREMENT ACT PRIMARY INSURANCE AMOUNT DETERMINATIONS Cost-of-Living Increases § 225.42 Notice of the percentage amount of a cost-of-living increase. The percentage amount of the cost-of-living... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Notice of the percentage amount of a cost-of...

LHCb: Measurement of $D^{\\pm}$ Production Asymmetry at LHCb

CERN Multimedia

Xing, Zhou

2012-01-01

Heavy quark production in 7 TeV pp collisions at the LHC need not be flavour symmetric. Here the production asymmetry, $A_p$ , between $D_s^+$ and $D_s^-$ mesons is measured using the $\\phi\\pi$ decay mode. The difference between $\\pi^+$ and $\\pi^-$ detection efficiencies is measured using the ratio of fully reconstructed to partially reconstructed $D^*$ decays. Using 1 fb$^{-1}$ of data collected with the LHCb detector, we find $A_p = (-0.39 \\pm 0.22 \\pm 0.08)$%.

Dimensional measurements with submicrometer uncertainty in production environment

DEFF Research Database (Denmark)

De Chiffre, L.; Gudnason, M. M.; Madruga, D.

2015-01-01

The work concerns a laboratory investigation of a method to achieve dimensional measurements with submicrometer uncertainty under conditions that are typical of a production environment. The method involves the concurrent determination of dimensions and material properties from measurements carried...... gauge blocks along with their uncertainties were estimated directly from the measurements. The length of the two workpieces at the reference temperature of 20 °C was extrapolated from the measurements and compared to certificate values. The investigations have documented that the developed approach...

Method s for Measuring Productivity in Libraries and Information Centres

Directory of Open Access Journals (Sweden)

Mohammad Alaaei

2009-04-01

Full Text Available   Within Information centers, productivity is the result of optimal and effective use of information resources, service quality improvement, increased user satisfaction, pleasantness of working environment, increased motivation and enthusiasm of staff to work better. All contribute to the growth and development of information centers. Thus these centers would need to be familiar with methods employed in productivity measurement. Productivity is one of the criteria for evaluating system performance. In the past decades particular emphasis has been placed on measurement and improvement of human resource, creativity, innovation and expert analysis. Contemplation and efforts made towards identification of problems and issues and new means to make more useful and better resource management is the very definition of productivity. Simply put, productivity is the relationship between system output and the elements garnered to produce these outputs. The causality between variables and factors impacting on productivity is very complex. In information centers, given the large volume of elements involved, it seems necessary to increase efficiency and productivity

The Intensity of using production factors in Romania. Estimates from Cobb-Douglas and CES Models

Directory of Open Access Journals (Sweden)

Gheorghe Zaman

2007-12-01

Full Text Available The production function explains the mechanism through which inputs are changed into outputs and the partial efficiency of labour and capital. It also allows for understanding the elasticity of substitution, which measures the percentage change in factor proportions due to a percentage change in the marginal rate of technical substitution. In this research we have used aggregate production functions of Cobb-Douglas type in different time-series and cross-section analysis of Romania’s economic growth from the standpoint of the intensity of using capital and labour factors, as determinant elements for the level of production and GDP. We have also applied the two factor Constant Elasticity of Substitution (CES production function, which is considered to be the generalised form of the Cobb-Douglas function. Using the available statistical data regarding Romania’s economy in the 1990-2005 period, we have performed time-series and cross-section analysis based on the aggregated production functions at the national level.

Artificial neural networks for prediction of percentage of water

Indian Academy of Sciences (India)

... Lecture Workshops · Refresher Courses · Symposia · Live Streaming. Home; Journals; Bulletin of Materials Science; Volume 35; Issue 6. Artificial neural networks for prediction of percentage of water absorption of geopolymers produced by waste ashes. Ali Nazari. Volume 35 Issue 6 November 2012 pp 1019-1029 ...

Measuring excess capital capacity in agricultural production

NARCIS (Netherlands)

Zhengfei, G.; Kumbhakar, S.C.; Myers, R.J.; Oude Lansink, A.G.J.M.

2009-01-01

We introduce the concept "excess capital capacity" and employ a stochastic input requirement frontier to measure excess capital capacity in agricultural production. We also propose a two-step estimation method that allows endogenous regressors in stochastic frontier models. The first step uses

Measurement of charmed particle production in hadronic reactions

CERN Multimedia

2002-01-01

The aim of the experiment is to measure the production cross-section for charmed particles in hadronic reactions, study their production mechanism, and search for excited charmed hadrons.\\\\ \\\\ Charmed Mesons and Baryons will be measured in $\\pi$ and $p$ interactions on Beryllium between 100 and 200 GeV/c. The trigger will be on an electron from the leptonic decay of one charmed particle by signals from the Cerenkov counter (Ce), the electron trigger calorimeter (eCal), scintillation counters, and proportional wire chambers. The accompanying charmed particle will be measured via its hadronic decay in a two-stage magnetic spectrometer with drift chambers (arms 2, 3a, 3b, 3c), two large-area multicell Cerenkov counters (C2, C3) and a large-area shower counter ($\\gamma$-CAL). The particles which can be measured and identified include $\\gamma, e, \\pi^{\\pm}, \\pi^{0}, K^{\\pm}, p, \\bar{p}$ so that a large number of hadronic decay modes of charmed particles can be studied. \\\\ \\\\ A silicon counter telescope with 5 $\\m...

Relation Between Bitumen Content and Percentage Air Voids in Semi Dense Bituminous Concrete

Science.gov (United States)

Panda, R. P.; Das, Sudhanshu Sekhar; Sahoo, P. K.

2018-06-01

Hot mix asphalt (HMA) is a heterogeneous mix of aggregate, mineral filler, bitumen, additives and air voids. Researchers have indicated that the durability of the HMA is sensitive on the actual bitumen content and percentage air void. This paper aims at establishing the relationship between the bitumen content and the percentage air voids in Semi Dense Bituminous Concrete (SDBC) using Viscosity Grade-30 (VG-30) bitumen. Total 54 samples have been collected, for formulation and validation of relationship and observed that the percentage air voids increases with decrease in actual bitumen content and vice versa. A minor increase in percentage air voids beyond practice of designed air voids in Marshall Method of design is required for better performance, indicating a need for reducing the codal provision of minimum bitumen content for SDBC as specified in Specification for Road & Bridges (Fourth Revision) published by Indian Road Congress, 2001. The study shows a possibility of reducing designed minimum bitumen content from codal provision for SDBC by 0.2% of weight with VG-30 grade of Bitumen.

Relation Between Bitumen Content and Percentage Air Voids in Semi Dense Bituminous Concrete

Science.gov (United States)

Panda, R. P.; Das, Sudhanshu Sekhar; Sahoo, P. K.

2018-02-01

Hot mix asphalt (HMA) is a heterogeneous mix of aggregate, mineral filler, bitumen, additives and air voids. Researchers have indicated that the durability of the HMA is sensitive on the actual bitumen content and percentage air void. This paper aims at establishing the relationship between the bitumen content and the percentage air voids in Semi Dense Bituminous Concrete (SDBC) using Viscosity Grade-30 (VG-30) bitumen. Total 54 samples have been collected, for formulation and validation of relationship and observed that the percentage air voids increases with decrease in actual bitumen content and vice versa. A minor increase in percentage air voids beyond practice of designed air voids in Marshall Method of design is required for better performance, indicating a need for reducing the codal provision of minimum bitumen content for SDBC as specified in Specification for Road & Bridges (Fourth Revision) published by Indian Road Congress, 2001. The study shows a possibility of reducing designed minimum bitumen content from codal provision for SDBC by 0.2% of weight with VG-30 grade of Bitumen.

Measurements of the Vector boson production with the ATLAS Detector

CERN Document Server

Lapertosa, Alessandro; The ATLAS collaboration

2017-01-01

Measurements of the Drell-Yan production of W and Z/γ bosons at the LHC provide a benchmark of our understanding of perturbative QCD and probe the proton structure in a unique way. The ATLAS collaboration has performed new high precision measurements at center-of-mass energies of 7 TeV. The measurements are performed for W+, W− and Z/γ bosons integrated and as a function of the boson or lepton rapidity and the Z/γ∗ mass. Unprecedented precision is reached and strong constraints on Parton Distribution functions, in particular the strange density are found. Z cross sections are also measured at a center-of-mass energies of 8 TeV and 13 TeV, and cross-section ratios to the top-quark pair production have been derived. This ratio measurement leads to a cancellation of systematic effects and allows for a high precision comparison to the theory predictions. The production of jets in association with vector bosons is a further important process to study perturbative QCD in a multi-scale environment. The ATLAS ...

Measurements of the vector boson production with the ATLAS detector

CERN Document Server

Lapertosa, Alessandro; The ATLAS collaboration

2017-01-01

Measurements of the Drell-Yan production of $W$ and $Z$ bosons at the LHC provide a benchmark of our understanding of perturbative QCD and probe the proton structure in a unique way. The ATLAS collaboration has performed new high precision measurements at center-of-mass energies of 7 TeV. The measurements are performed for $W^+$, $W^{-}$ and $Z$ bosons integrated and as a function of the boson or lepton rapidity and the $Z$ mass. Unprecedented precision is reached and strong constraints on Parton Distribution Functions, in particular the strange density are found. $Z$ boson cross sections are also measured at a center-of-mass energies of 8 TeV and 13 TeV, and cross-section ratios to the top-quark pair production have been derived. This ratio measurement leads to a cancellation of systematic effects and allows for a high precision comparison to the theory predictions. The production of jets in association with vector bosons is a further important process to study perturbative QCD in a multi-scale environment. ...

Analysis the percentage frequency to estimate Volleyball´s performance

Directory of Open Access Journals (Sweden)

Santiago Calero-Morales

2012-12-01

Full Text Available The study analyzes the percentage frequency as a mathematical model used to estimate the international volleyball performance. Based on the description of its practical objectives, the paper shows some positive and negative characteristics of the equation, characteristics that affect decision making by the coach. Three studies were conducted involving a population of 42 games in volleyball, men's youth category, 10 game of 13 possible belonging to the Final round of 2006 FIVB World League, and a ranked players in the qualifying phase of the 2006 World League with 48 games as population. The investigation determined that the percentage frequency is a simple computer model that defines a value perfectly isolated from reality, but does not model correctly all variables that significantly influence the final performance, creating false interpretations of reality.

Does Input Quality Drive Measured Differences in Firm Productivity?

DEFF Research Database (Denmark)

Fox, Jeremy T.; Smeets, Valerie Anne Rolande

2011-01-01

One explanation for productivity dispersion is that the quality of inputs differs across firms. We add labor market history variables such as experience and firm and industry tenure, as well as general human capital measures such as schooling and sex. Adding these variables decreases the ratio...... of the 90th to 10th productivity quantiles from 3.27 to 2.68 across eight Danish manufacturing and service industries. We also use the wage bill and worker fixed effects. We find that the wage bill explains as much dispersion as human capital measures....

The Production Measurement Model of Open Pit Mine Based on Truck Operation Diagram

Directory of Open Access Journals (Sweden)

Sun Xiao-Yu

2016-01-01

Full Text Available Conventional production measurement of truck dispatching system in open pit mine has not been effectively expressed by a mathematical model, which brings a negative effect on the subsequent data mining and a compatibility issue to apply the production measurement with fixed assignment of truck. In this study, based on the proposed concept that truck is not only the carrier of transport material, but also act as the bridges and linkages between the loading sites and the unloading sites, a new truck operation diagram was established, which was further developed to a basic data matrix and a production measurement model. The new model allowed to calculatethe production measurement of the transport, loading, unloading, material and etc, respectively, as well as with any calculation in combination of more than one factor as needed.It solved the compatibility issue between conventional production measurement and the production measurement of fixed assignment of truck with good practical results.

The percentage of macrophage numbers in rat model of sciatic nerve crush injury

Directory of Open Access Journals (Sweden)

Satrio Wicaksono

2016-02-01

Full Text Available ABSTRACT Excessive accumulation of macrophages in sciatic nerve fascicles inhibits regeneration of peripheral nerves. The aim of this study is to determine the percentage of the macrophages inside and outside of the fascicles at the proximal, at the site of injury and at the distal segment of rat model of sciatic nerve crush injury. Thirty male 3 months age Wistar rats of 200-230 g were divided into sham-operation group and crush injury group. Termination was performed on day 3, 7, and 14 after crush injury. Immunohistochemical examination was done using anti CD68 antibody. Counting of immunopositive and immunonegative cells was done on three representative fields for extrafascicular and intrafascicular area of proximal, injury and distal segments. The data was presented as percentage of immunopositive cells. The percentage of the macrophages was significantly increased in crush injury group compared to the sham-operated group in all segments of the peripheral nerves. While the percentage of macrophages outside fascicle in all segments of sciatic nerve and within the fascicle in the proximal segment reached its peak on day 3, the percentage of macrophages within the fascicles at the site of injury and distal segments reached the peak later at day 7. In conclusions, accumulation of macrophages outside the nerve fascicles occurs at the beginning of the injury, and then followed later by the accumulation of macrophages within nerve fascicles

29 CFR 778.503 - Pseudo “percentage bonuses.”

Science.gov (United States)

2010-07-01

... such a scheme is artificially low, and the difference between the wages paid at the hourly rate and the... Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR STATEMENTS OF GENERAL... part, a true bonus based on a percentage of total wages—both straight time and overtime wages—satisfies...

Assessment of global precipitation measurement satellite products over Saudi Arabia

Science.gov (United States)

Mahmoud, Mohammed T.; Al-Zahrani, Muhammad A.; Sharif, Hatim O.

2018-04-01

Most hydrological analysis and modeling studies require reliable and accurate precipitation data for successful simulations. However, precipitation measurements should be more representative of the true precipitation distribution. Many approaches and techniques are used to collect precipitation data. Recently, hydrometeorological and climatological applications of satellite precipitation products have experienced a significant improvement with the emergence of the latest satellite products, namely, the Integrated Multi-satellitE Retrievals for Global Precipitation Measurement (GPM) mission (IMERG) products, which can be utilized to estimate and analyze precipitation data. This study focuses on the validation of the IMERG early, late and final run rainfall products using ground-based rain gauge observations throughout Saudi Arabia for the period from October 2015 to April 2016. The accuracy of each IMERG product is assessed using six statistical performance measures to conduct three main evaluations, namely, regional, event-based and station-based evaluations. The results indicate that the early run product performed well in the middle and eastern parts as well as some of the western parts of the country; meanwhile, the satellite estimates for the other parts fluctuated between an overestimation and an underestimation. The late run product showed an improved accuracy over the southern and western parts; however, over the northern and middle parts, it showed relatively high errors. The final run product revealed significantly improved precipitation estimations and successfully obtained higher accuracies over most parts of the country. This study provides an early assessment of the performance of the GPM satellite products over the Middle East. The study findings can be used as a beneficial reference for the future development of the IMERG algorithms.

Infants with Down Syndrome: Percentage and Age for Acquisition of Gross Motor Skills

Science.gov (United States)

Pereira, Karina; Basso, Renata Pedrolongo; Lindquist, Ana Raquel Rodrigues; da Silva, Louise Gracelli Pereira; Tudella, Eloisa

2013-01-01

The literature is bereft of information about the age at which infants with Down syndrome (DS) acquire motor skills and the percentage of infants that do so by the age of 12 months. Therefore, it is necessary to identify the difference in age, in relation to typical infants, at which motor skills were acquired and the percentage of infants with DS…

Criterion 6, indicator 33 : recovery or recycling of forest products as a percentage of total forest products consumption

Science.gov (United States)

Ken Skog; James Howard; Rebecca. Westby

2011-01-01

This indicator shows the trend in recovering wood and paper for reuse in products in the United States. This reuse can hold down the need to harvest wood to meet U.S. consumption needs. The paper recycling rate (utilization rate in producing new paper) increased from 22% to 38% between 1970 and 1996, but then stabilized at 37% to 38% between 1996 and 2006. This rate...

Measuring the productivity of university research reactors

International Nuclear Information System (INIS)

Voth, M.H.

1989-01-01

University Research Reactors (URRs) on 33 campuses in the United States provide valuable contributions to academic instruction and research programs. In most cases, there are no alternative diagnostic techniques to supplant the need for a reactor and associated facilities. Since URRs constitute a major financial commitment, it is important that they be operated in a productive manner. Productivity may be defined as the sum of new knowledge generated, existing knowledge transferred to others, and analytical services provided to assist in the generation of new knowledge; another definition of productivity is this sum expressed as a function of the cost incurred. In either case, a consistent measurement is difficult and more qualitative than quantitative. A uniform reporting system has been proposed that defines simplified categories through which meaningful comparisons can be performed

Apparent partition coefficient in octanol-water and binding percentage to BSA of 153Sm(113,117Snm) complexes

International Nuclear Information System (INIS)

Yang Yuqing; Luo Shunzhong; Wang Guanquan; He Jiaheng; Bing Wenzeng; Pu Manfei; Wei Hongyuan; Wang Wenjin

2004-01-01

Apparent partition coefficient in octanol-water and binding percentage to BSA of 153 Sm-NTMP, 153 Sm-HEDTMP, 153 Sm-DCTMP, 153 Sm-EDTMP, 153 Sm-DTPMP, 113,117 Sn m -EDTMP, 113,117 Sn m -HEDTMP, 113,117 Sn m -DTPMP are measured. The results show that there is a linear relationship between the relative magnitude of the apparent partition coefficient in octanol-water and the relative magnitude of the binding percentage to BSA of these 153 Sm( 113,117 Sn m ) complexes. This linear relationship provides a new method for determination of the apparent partition coefficient in octanol-water of 153 Sm( 113,117 Sn m ) complexes of this kind. This linear relationship also implicates that hydrophobic force plays an important role in the binding of 153 Sm( 113,117 Sn m ) complexes to BSA

Di-boson production measurements with the ATLAS detector

CERN Document Server

Chevalier, Laurent

2015-01-01

This talk covers the results of the measurements of diboson production cross sections in proton- proton interactions at 7 TeV in 2011 and at 8 TeV in 2012, performed by the ATLAS experiment. The cross sections are measured in phase space regions defined by the decay kinematics, the detector acceptance and then extrapolated to the full phase space. Cross sections for VV (V=W, Z, γ) production in the leptonic or semileptonic channels are compared to (N)NLO predictions of the Standard Model. Kinematic spectra are used to place constraints on anomalous triple-gauge-boson couplings. All cross sections are in agreement with the Standard Model predictions. No experimental evidence is found of anomalous triple-gauge-boson couplings. PACS: 14.70.-e Gauge bosons.

Measurements of photon and jet production properties with ATLAS

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00237016; The ATLAS collaboration

2016-09-09

Summary of recent ATLAS measurements of jet and photon production using proton–proton (pp) collisions from the Large Hadron Collider. The charged-particle multiplicity in jets, and jet charge measurements are presented using 8 TeV pp collisions. Differential measurements of jet and photon cross-sections are shown for 7, 8 and 13 TeV pp collisions.

Coverage percentage and raman measurement of cross-tile and scaffold cross-tile based DNA nanostructures.

Science.gov (United States)

Gnapareddy, Bramaramba; Ahn, Sang Jung; Dugasani, Sreekantha Reddy; Kim, Jang Ah; Amin, Rashid; Mitta, Sekhar Babu; Vellampatti, Srivithya; Kim, Byeonghoon; Kulkarni, Atul; Kim, Taesung; Yun, Kyusik; LaBean, Thomas H; Park, Sung Ha

2015-11-01

We present two free-solution annealed DNA nanostructures consisting of either cross-tile CT1 or CT2. The proposed nanostructures exhibit two distinct structural morphologies, with one-dimensional (1D) nanotubes for CT1 and 2D nanolattices for CT2. When we perform mica-assisted growth annealing with CT1, a dramatic dimensional change occurs where the 1D nanotubes transform into 2D nanolattices due to the presence of the substrate. We assessed the coverage percentage of the 2D nanolattices grown on the mica substrate with CT1 and CT2 as a function of the concentration of the DNA monomer. Furthermore, we fabricated a scaffold cross-tile (SCT), which is a new design of a modified cross-tile that consists of four four-arm junctions with a square aspect ratio. For SCT, eight oligonucleotides are designed in such a way that adjacent strands with sticky ends can produce continuous arms in both the horizontal and vertical directions. The SCT was fabricated via free-solution annealing, and self-assembled SCT produces 2D nanolattices with periodic square cavities. All structures were observed via atomic force microscopy. Finally, we fabricated divalent nickel ion (Ni(2+))- and trivalent dysprosium ion (Dy(3+))-modified 2D nanolattices constructed with CT2 on a quartz substrate, and the ion coordinations were examined via Raman spectroscopy. Copyright © 2015 Elsevier B.V. All rights reserved.

Associations of body mass index and waist circumference with: energy intake and percentage energy from macronutrients, in a cohort of australian children

Science.gov (United States)

2011-01-01

Background It is evident from previous research that the role of dietary composition in relation to the development of childhood obesity remains inconclusive. Several studies investigating the relationship between body mass index (BMI), waist circumference (WC) and/or skin fold measurements with energy intake have suggested that the macronutrient composition of the diet (protein, carbohydrate, fat) may play an important contributing role to obesity in childhood as it does in adults. This study investigated the possible relationship between BMI and WC with energy intake and percentage energy intake from macronutrients in Australian children and adolescents. Methods Height, weight and WC measurements, along with 24 h food and drink records (FDR) intake data were collected from 2460 boys and girls aged 5-17 years living in the state of Queensland, Australia. Results Statistically significant, yet weak correlations between BMI z-score and WC with total energy intake were observed in grades 1, 5 and 10, with only 55% of subjects having a physiologically plausible 24 hr FDR. Using Pearson correlations to examine the relationship between BMI and WC with energy intake and percentage macronutrient intake, no significant correlations were observed between BMI z-score or WC and percentage energy intake from protein, carbohydrate or fat. One way ANOVAs showed that although those with a higher BMI z-score or WC consumed significantly more energy than their lean counterparts. Conclusion No evidence of an association between percentage macronutrient intake and BMI or WC was found. Evidently, more robust longitudinal studies are needed to elucidate the relationship linking obesity and dietary intake. PMID:21615883

ABOUT FEW APPROACHES TO COMMERCIAL BANK PERCENTAGE POLICY CONSTRUCTION IN CREDITING POPULATION

Directory of Open Access Journals (Sweden)

A.A. Kuklin

2007-06-01

Full Text Available In the article we consider some aspects of Russian Federation and Sverdlovsk region bank sector development and few principles of credit organization percentage policy construction. We also describe interest rate calculation methods depending on currency toolkit and the received results of using the methods in reference to population crediting development. Besides we give some offers on increasing management efficiency of percentage policy and decreasing delayed credit debts level and some offers on specification of population crediting development forecasts in Sverdlovsk region.

Productivity Measurement in Manufacturing and the Expenditure Approach

DEFF Research Database (Denmark)

Schjerning, Bertel; Sørensen, Anders

2008-01-01

This paper studies conversion factors based on the expenditure approach and evaluates the appropriateness for international comparisons of output levels in manufacturing. We apply a consistency check based on the insight that relative productivity levels should be invariant to the choice of base....... The conclusion is insensitive to the applied method for developing conversion factors. The implication is that we cannot measure relative productivity levels in manufacturing across countries using the expenditure approach....

Methods and measures of enhancing production capacity of uranium mines

International Nuclear Information System (INIS)

Ni Yuhui

2013-01-01

Limited by resource conditions and mining conditions, the production capacity of uranium mines is generally small. The main factors to affect the production capacity determination of uranium mines are analyzed, the ways and measures to enhance the production capacity of uranium mines are explored from the innovations of technology and management mode. (author)

Performance evaluation and adaptability of lactating dairy cows fed soybean and its by-products

Directory of Open Access Journals (Sweden)

Angela Maria de Vasconcelos

2014-09-01

Full Text Available Aiming to evaluate the lactation performance and adaptability of confined dairy cows fed diets containing soybean and its by-products, this study used 12 Holsteincows with initial production of 30 kg milk-1 day-1 day-1 in feedlot system distributed in a 4 x 4 Latin square design. The experimental period lasted 84 days. The dry matter intake (DMI and meteorological variables were recorded daily. Milk production was measured from the 15th to the 21st day, with milk analysis twice in each period, and physiological variables collected on the 15, 17th and 21st days of each experimental period. The thermal comfort indices and rectal temperature were considered normal, however the respiratory frequency and heart rate were different between the periods. Total milk production and percentage of crude protein were not affected. The thermal environment had influence on the CMS and on the percentage of milk fat in warmer periods, but the mechanism of heat dissipation was efficient for the animals to maintain homeothermy without affecting milk production.

Productivity in Pediatric Palliative Care: Measuring and Monitoring an Elusive Metric.

Science.gov (United States)

Kaye, Erica C; Abramson, Zachary R; Snaman, Jennifer M; Friebert, Sarah E; Baker, Justin N

2017-05-01

Workforce productivity is poorly defined in health care. Particularly in the field of pediatric palliative care (PPC), the absence of consensus metrics impedes aggregation and analysis of data to track workforce efficiency and effectiveness. Lack of uniformly measured data also compromises the development of innovative strategies to improve productivity and hinders investigation of the link between productivity and quality of care, which are interrelated but not interchangeable. To review the literature regarding the definition and measurement of productivity in PPC; to identify barriers to productivity within traditional PPC models; and to recommend novel metrics to study productivity as a component of quality care in PPC. PubMed ® and Cochrane Database of Systematic Reviews searches for scholarly literature were performed using key words (pediatric palliative care, palliative care, team, workforce, workflow, productivity, algorithm, quality care, quality improvement, quality metric, inpatient, hospital, consultation, model) for articles published between 2000 and 2016. Organizational searches of Center to Advance Palliative Care, National Hospice and Palliative Care Organization, National Association for Home Care & Hospice, American Academy of Hospice and Palliative Medicine, Hospice and Palliative Nurses Association, National Quality Forum, and National Consensus Project for Quality Palliative Care were also performed. Additional semistructured interviews were conducted with directors from seven prominent PPC programs across the U.S. to review standard operating procedures for PPC team workflow and productivity. Little consensus exists in the PPC field regarding optimal ways to define, measure, and analyze provider and program productivity. Barriers to accurate monitoring of productivity include difficulties with identification, measurement, and interpretation of metrics applicable to an interdisciplinary care paradigm. In the context of inefficiencies

Single top-quark production cross section measurements using the ATLAS detector at the LHC

CERN Document Server

Rieck, Patrick; The ATLAS collaboration

2016-01-01

Measurements of single top­quark production in proton proton collisions are presented. The measurements include the first such measurements from the 13 TeV ATLAS dataset. In the leading order process, a W boson is exchanged in the t­channel. The single top­quark and anti­top total production cross sections, their ratio, as well as a measurement of the inclusive production cross section is presented. At 8 TeV, differential cross­section measurements of the t­channel process are also presented, these measurements include limits on anomalous contributions to the Wtb vertex. A measurement of the production cross section of a single top quark in association with a W boson, the second largest single­top production mode, is also presented. Finally, evidence for single­top production in the 8 TeV ATLAS dataset is presented. All measurements are compared to state­of­ the­art theoretical calculations.

Do dose area product meter measurements reflect radiation doses ...

African Journals Online (AJOL)

Enrique

SA JOURNAL OF RADIOLOGY • August 2004. Abstract. This study determined the correlation between radiation doses absorbed by health care workers and dose area product meter (DAP) measurements at Universitas Hospital, Bloemfontein. The DAP is an instrument which accurately measures the radiation emitted from ...

Do dose area product meter measurements reflect radiation doses ...

African Journals Online (AJOL)

This study determined the correlation between radiation doses absorbed by health care workers and dose area product meter (DAP) measurements at Universitas Hospital, Bloemfontein. The DAP is an instrument which accurately measures the radiation emitted from the source. The study included the interventional ...

A computer controlled ultrasonic measurement and testequipment for rotation-symmetrical products

International Nuclear Information System (INIS)

Abend, K.; Lang, R.; Schmidt, U.; Schuett, U.; Sterberg, W.

1976-01-01

During production of rotation-symmetrical thin wall precision tubes, dimensions must be measured and the tubes have to be inspected for surface defects. Within the production area of the tubes, several measurement points for different applications are located at different places. The paper describes their on-line connection to a process-computer system

Effects of crossbreeding indigenous Hair Goat with Saanen on carcass measurements and meat quality of kids under an intensive production system.

Science.gov (United States)

Yilmaz, Alper; Ekiz, Bulent; Ozcan, Mustafa; Kaptan, Cuneyt; Hanoglu, Hulya; Yildirir, Mesut

2009-08-01

The aim of study was to investigate the effect of genotype on carcass measurements and meat quality characteristics of purebred Hair Goat, Saanen x Hair Goat (F(1) and B(1)) kids under an intensive production system. In total, 24 kids were slaughtered at the age of approximately 133 days. Kids were fattened for 56 days immediately after weaning. Hot carcass weights were 6.78, 7.61 and 7.02 kg and dressing percentages were 49.71, 49.27 and 48.78%, respectively (P > 0.05). Differences between genotypes for carcass measurements and indexes were not significant. Effect of genotype on pH measurements, drip loss, water holding capacity, cooking loss and Warner Bratzler shear force values were not significant. Meat lightness values at 0 h, 1 h and 1 day after cutting were higher in crossbred kids than Hair Goat kids (P meat samples of Hair goat kids at 0 h, 1 h and 1 day measurements (P meat sensory characteristics, except tenderness. Panelists gave lower scores for meat tenderness to F(1) and B(1) crosses compared to purebred Hair Goat kids. In conclusion, higher meat lightness values of crossbred kids, at particularly B(1) level, might have a positive effect on the consumer choices.

Consumer oriented new product development

DEFF Research Database (Denmark)

van Trijp, Hans C.M.; Grunert, Klaus G

2014-01-01

New product development is a necessary activity for a company’s competitiveness, profitability and growth. However, new product development is a risky activity as a large percentage of new product introductions fail to achieve their commercial targets. The present chapter reviews the existing...

Measurement of photon production cross sections with the ATLAS detector

CERN Document Server

Turra, Ruggero; The ATLAS collaboration

2017-01-01

The production of prompt isolated photons at hadron colliders provides a stringent test of perturbative QCD and can be used to probe the proton structure. The ATLAS Collaboration has performed precise measurements of the inclusive production of isolated prompt photons at a centre-of-mass energy of 13 TeV, differential in both rapidity and photon transverse momentum. In addition, the integrated and differential cross sections for isolated photon pairs at 8 TeV have been measured. The results are compared with state-of-the-art theory predictions at NLO in QCD and with predictions of several MC generators. The production of prompt photons in association with jets provides an additional testing ground for perturbative QCD (pQCD) with a hard colourless probe less affected by hadronisation effects than jet production. The dynamics of isolated-photon plus jet production in pp collisions at a centre-of-mass energy of 8 and 13 TeV will be presented and discussed.

Soil Carbon Mapping in Low Relief Areas with Combined Land Use Types and Percentages

Science.gov (United States)

Liu, Y. L.; Wu, Z. H.; Chen, Y. Y.; Wang, B. Z.

2018-05-01

Accurate mapping of soil carbon in low relief areas is of great challenge because of the defect of conventional "soil-landscape" model. Efforts have been made to integrate the land use information in the modelling and mapping of soil organic carbon (SOC), in which the spatial context was ignored. With 256 topsoil samples collected from Jianghan Plain, we aim to (i) explore the land-use dependency of SOC via one-way ANOVA; (ii) investigate the "spillover effect" of land use on SOC content; (iii) examine the feasibility of land use types and percentages (obtained with a 200-meter buffer) for soil mapping via regression Kriging (RK) models. Results showed that the SOC of paddy fields was higher than that of woodlands and irrigated lands. The land use type could explain 20.5 % variation of the SOC, and the value increased to 24.7 % when the land use percentages were considered. SOC was positively correlated with the percentage of water area and irrigation canals. Further research indicated that SOC of irrigated lands was significantly correlated with the percentage of water area and irrigation canals, while paddy fields and woodlands did not show similar trends. RK model that combined land use types and percentages outperformed the other models with the lowest values of RMSEC (5.644 g/kg) and RMSEP (6.229 g/kg), and the highest R2C (0.193) and R2P (0.197). In conclusions, land use types and percentages serve as efficient indicators for the SOC mapping in plain areas. Additionally, irrigation facilities contributed to the farmland SOC sequestration especially in irrigated lands.

Effect of Gene and Physical Activity Interaction on Trunk Fat Percentage Among the Newfoundland Population

Directory of Open Access Journals (Sweden)

Anthony Payne

2014-01-01

Full Text Available Objective To explore the effect of FTO gene and physical activity interaction on trunk fat percentage. Design and Methods Subjects are 3,004 individuals from Newfoundland and Labrador whose trunk fat percentage and physical activity were recorded, and who were genotyped for 11 single-nucleotide polymorphisms (SNPs in the FTO gene. Subjects were stratified by gender. Multiple tests and multiple regressions were used to analyze the effects of physical activity, variants of FTO , age, and their interactions on trunk fat percentage. Dietary information and other environmental factors were not considered. Results Higher levels of physical activity tend to reduce trunk fat percentage in all individuals. Furthermore, in males, rs9939609 and rs1421085 were significant (α = 0.05 in explaining central body fat, but no SNPs were significant in females. For highly active males, trunk fat percentage varied significantly between variants of rs9939609 and rs1421085, but there is no significant effect among individuals with low activity. The other SNPs examined were not significant in explaining trunk fat percentage. Conclusions Homozygous male carriers of non-obesity risk alleles at rs9939609 and rs1421085 will have significant reduction in central body fat from physical activity in contrast to homozygous males of the obesity-risk alleles. The additive effect of these SNPs is found in males with high physical activity only.

Measurement framework for product service system performance of generator set distributors

Science.gov (United States)

Sofianti, Tanika D.

2017-11-01

Selling Generator Set (Genset) in B2B market, distributors assisted manufacturers to sell products. This is caused by the limited resources owned by the manufacturer for adding service elements. These service elements are needed to enhance the competitiveness of the generator sets. Some genset distributors often sell products together with supports to their customers. Industrial distributor develops services to meet the needs of the customer. Generator set distributors support machines and equipment produced by manufacturer. The services delivered by the distributors could enhance value obtained by the customers from the equipment. Services provided to customers in bidding process, ordering process of the equipment from the manufacturer, equipment delivery, installations, and the after sales stage. This paper promotes framework to measure Product Service System (PSS) of Generator Set distributors in delivering their products and services for the customers. The methodology of conducting this research is by adopting the perspective of the providers and customers and by taking into account the tangible and intangible products. This research leads to the idea of improvement of current Product Service System of a Genset distributor. This research needs further studies in more detailed measures and the implementation of measurement tools.

Carcass traits of improved and indigenous lamb breeds of North-Western Turkey under an intensive production system

Directory of Open Access Journals (Sweden)

Omur Kocak

2010-01-01

Full Text Available The aim of study was to investigate the carcass quality of Turkish Merino, Ramlic, Kivircik, Chios and Imroz breeds in north-western Turkey under an intensive production system. After weaning at approximately 85 days of age, 46 lambs from Turkish Merino, Ramlic, Kivircik, Chios and Imroz breeds were fattened for 56 days. Slaughter weights were 47.39, 45.68, 47.27, 31.08 and 29.82 kg and chilled carcass weights were 23.35, 22.33, 23.51, 14.33 and 13.75 kg, respectively (P<0.001. Improved Turkish Merino and Ramlic and indigenous Kivircik lambs had higher carcass measurements than indigenous Chios and Imroz lambs. Chios lamb carcasses had the highest tail root fat yellowness and tail percentage while having the lowest fatness score, omental and mesenteric fat percentage and kidney knob and channel fat percentage. Turkish Merino lambs had higher shoulder percentage, lean percentage and lean/total fat ratio in the hind leg and produced less total fat in the hind leg than Ramlic and Kivircik lambs. These results indicate that improved Turkish Merino might be used to produce high quality lamb carcasses in north-western Turkey. Among indigenous breeds Kivircik showed an outstanding carcass production performance.

Appeals to AC as a Percentage of Appealable Hearing Level Dispositions

Data.gov (United States)

Social Security Administration — Longitudinal report detailing the numbers and percentages of Requests for Review (RR) of hearing level decisions or dismissals filed with the Appeals Council (AC)...

Food Safety Practices in the Egg Products Industry.

Science.gov (United States)

Viator, Catherine L; Cates, Sheryl C; Karns, Shawn A; Muth, Mary K; Noyes, Gary

2016-07-01

We conducted a national census survey of egg product plants (n = 57) to obtain information on the technological and food safety practices of the egg products industry and to assess changes in these practices from 2004 to 2014. The questionnaire asked about operational and sanitation practices, microbiological testing practices, food safety training for employees, other food safety issues, and plant characteristics. The findings suggest that improvements were made in the industry's use of food safety technologies and practices between 2004 and 2014. The percentage of plants using advanced pasteurization technology and an integrated, computerized processing system increased by almost 30 percentage points. Over 90% of plants voluntarily use a written hazard analysis and critical control point (HACCP) plan to address food safety for at least one production step. Further, 90% of plants have management employees who are trained in a written HACCP plan. Most plants (93%) conduct voluntary microbiological testing. The percentage of plants conducting this testing on egg products before pasteurization has increased by almost 30 percentage points since 2004. The survey findings identify strengths and weaknesses in egg product plants' food safety practices and can be used to guide regulatory policymaking and to conduct required regulatory impact analysis of potential regulations.

Measuring a Country's Product Ladder and Technology Level based on Trade Flow

Directory of Open Access Journals (Sweden)

Jong-il Kim

2006-06-01

Full Text Available This study tries to quantify the technology level of products based on the concept of product ladder. While many studies on country technology competitiveness use the aggregate indices such as total factor productivity and revealed comparative advantage, this study estimates the ranking of about 2000 products in product ladder by using SITC 5 digit level export data. Based on the product ladder, this study measures the country and industry ranking and explores the characteristics of the ranking. It provides the international comparison of inter-industry and intra-industry ranking differences in product ladder. The statistical relationships between the ranking in product ladder and the determinants of technology level such as R&D and physical capital investment and wage, confirms that the measured ranking in product ladder could be regarded as an indirect indicator of technology level. The product ladder is applied to the estimation of production function to see the effect of the product differentiation on labor productivity.

Android and gynoid fat percentages and serum lipid levels in United States adults.

Science.gov (United States)

Min, Kyoung-Bok; Min, Jin-Young

2015-03-01

Accumulating evidence suggests that fat distribution is a better predictor of cardiovascular disease than body mass index (BMI). The aim of this study was to investigate the association of android and gynoid fat percentages with lipid profiles to determine whether android and/or gynoid fat percentages are associated with serum lipid levels. A population-based cross-sectional study. Five thousand six hundred and ninety-six adults (20 years and older) who participated in the National Health and Nutrition Examination Survey 2003-2006. The regional body composition in the android and gynoid regions was defined by dual energy X-ray absorptiometry (DXA). The estimation of lipid risk profiles included total cholesterol, high-density lipoprotein (HDL) -cholesterol, low-density lipoprotein (LDL) -cholesterol and triglycerides (TG). Regardless of gender, android and gynoid body fat percentages were positively and significantly correlated with BMI and waist circumference. After adjustment for age, ethnicity, education, smoking, alcohol consumption, dyslipidaemia and BMI, increases in android fat percentage were significantly associated with total cholesterol, TG and HDL cholesterol in males, and total cholesterol, HDL cholesterol and LDL cholesterol in females. The gynoid fat percentages showed a positive correlation with total cholesterol in males, whereas gynoid fat accumulation in females showed a favourable association with TG and HDL cholesterol. The observed associations differed according to ethnic groups. Our results suggest that regional fat distribution in the android and gynoid regions have different effects on lipid profiles, and that fat in the android region, rather than the gynoid region, may be an important factor in determining the risk of cardiovascular disease. © 2014 John Wiley & Sons Ltd.

User productivity as a function of AutoCAD interface design.

Science.gov (United States)

Mitta, D A; Flores, P L

1995-12-01

Increased operator productivity is a desired outcome of user-CAD interaction scenarios. Two objectives of this research were to (1) define a measure of operator productivity and (2) empirically investigate the potential effects of CAD interface design on operator productivity, where productivity is defined as the percentage of a drawing session correctly completed per unit time. Here, AutoCAD provides the CAD environment of interest. Productivity with respect to two AutoCAD interface designs (menu, template) and three task types (draw, dimension, display) was investigated. Analysis of user productivity data revealed significantly higher productivity under the menu interface condition than under the template interface condition. A significant effect of task type was also discovered, where user productivity under display tasks was higher than productivity under the draw and dimension tasks. Implications of these results are presented.

Hospitals Productivity Measurement Using Data Envelopment Analysis Technique.

Science.gov (United States)

Torabipour, Amin; Najarzadeh, Maryam; Arab, Mohammad; Farzianpour, Freshteh; Ghasemzadeh, Roya

2014-11-01

This study aimed to measure the hospital productivity using data envelopment analysis (DEA) technique and Malmquist indices. This is a cross sectional study in which the panel data were used in a 4 year period from 2007 to 2010. The research was implemented in 12 teaching and non-teaching hospitals of Ahvaz County. Data envelopment analysis technique and the Malmquist indices with an input-orientation approach, was used to analyze the data and estimation of productivity. Data were analyzed using the SPSS.18 and DEAP.2 software. Six hospitals (50%) had a value lower than 1, which represents an increase in total productivity and other hospitals were non-productive. the average of total productivity factor (TPF) was 1.024 for all hospitals, which represents a decrease in efficiency by 2.4% from 2007 to 2010. The average technical, technologic, scale and managerial efficiency change was 0.989, 1.008, 1.028, and 0.996 respectively. There was not a significant difference in mean productivity changes among teaching and non-teaching hospitals (P>0.05) (except in 2009 years). Productivity rate of hospitals had an increasing trend generally. However, the total average of productivity was decreased in hospitals. Besides, between the several components of total productivity, variation of technological efficiency had the highest impact on reduce of total average of productivity.

Effect of Intermittent Drying Conditions on Fissuring Percentage and Process Duration of Long and Medium Rough Rice Varieties

Directory of Open Access Journals (Sweden)

A. Ghasemi

2016-02-01

Full Text Available One of the factors which affect the quality of rice during milling is internal fissures created during and after drying operation. In many industrial countries intermittent drying method is hired to reduce the moisture content of rough rice in order to reduce the drying time and maintain the quality of the final product. A high percentage of rice breakage during milling process, at least in Iran, necessitates performing the intermittent drying process and optimize it for Iranian varieties. In this study, the effect of this method (drying-tempering and continuous drying method (no tempering on fissuring percentage of Hashemi (long grain and Koohsar (medium grain varieties was investigated. The experiments were carried out at constant drying and tempering temperature of 60 °C, drying durations of 20, 40 and 60 min, and tempering durations of 0 (continuous drying, 40, 80, 120, 160, 200, 240 min. The results revealed that the tempering process significantly reduced the drying time and fissured kernels percentage. Moreover, for both varieties it was observed that the rice fissuring decreased significantly by continuing the tempering process until certain durations. Overall, for optimization of intermittent drying process in terms of the considered qualitative parameters, i.e. reducing energy consumption and losses, conducting 160 and 200 min tempering process after 40 min drying was found appropriate for Hashemi and Koohsar varieties, respectively. In addition, according to the higher fissuring for Koohsar (medium grain compared to Hashemi (long grain, it can be concluded that physical properties such as kernel slenderness ratio is effective on its fissuring.

Measurements of Drell-Yan and vector boson plus jet productions in ATLAS

CERN Document Server

Donadelli, Marisilvia; The ATLAS collaboration

2015-01-01

The inclusive production of W and Z bosons as well the off-shell Z/gamma* production at hadron colliders provide a benchmark of our understanding of quantum chromodynamic (QCD) and electroweak (EW) processes. The measurement of their production cross-sections can be compared to theory calculations at NNLO QCD and have an impact on our knowledge of the parton densities of the proton. The production of heavy flavour in association with a W or Z boson represent important backgrounds to Higgs and BSM studies and are challenging to calculate in QCD. During the LHC Run 1, several precision measurements were performed by the ATLAS experiment using pp data at 7 TeV of integrated as well as differential cross sections. Comparisons are made to a diverse set of state-­of­the­-art NLO QCD calculations, some of which are interfaced to MC generators for parton showering and hadronization. Z+bb production probes the b­-quark production by high-­order QCD processes. Measurement of W+c production cross section has a uniq...

Productivity studies of the nuclear waste programme

International Nuclear Information System (INIS)

Lundberg, Haakan

2002-08-01

. According to the National Institute of Economic Research, productivity development within industry as a whole, apart from during 2001, seems to keep pace with the part of the KBS-3-index that exceeds KPI. Productivity indices that directly relate to the nuclear waste programme do not exist within the official statistics of Sweden. SCB does not have many productivity statistics directly available. It is however rather easy to calculate work productivity from the SCB data about added value and number of employees. In this way the work productivity percentage changes have been calculated for: Mining and Mineral Industry, Machine Industry, Electricity, Gas, Water and Sewage Plants and Construction Industry. Productivity development has been irregular, and from time to time low or negative, especially for the construction industry. None of the four industries has had a clear positive productivity development. A first tentative conclusion is that international direct productivity statistics other than on the highest level are difficult to find. A second tentative conclusion is that international data do not indicate that a steady positive trend is obvious. The productivity at nuclear fuel processing in France increases in the beginning of the 1990s, but then decreases at the end of the decade. A simple weighted productivity index can be designed. The percentage change of the KBS-3-index and the sums of the percentage changes of weighted productivity indices can be compared. This calculation indicates that the increase in productivity can cope with the difference between KBS-3 and KPI between 1997 and 2001. The two years before however are not so good. A possible more accurate way to measure productivity changes, would be to design productivity indices parallel to the contracting and other indices that the KBS-3-index is built up from

12 CFR Appendix A to Part 707 - Annual Percentage Yield Calculation

Science.gov (United States)

2010-01-01

... percentage yield calculations for account disclosures and advertisements, while Part II discusses annual... number of days that would occur for any actual sequence of that many calendar months. If credit unions...

Relationship Between Work Productivity and Clinical Characteristics in Rheumatoid Arthritis.

Science.gov (United States)

Salazar-Mejía, Carlos Eduardo; Galarza-Delgado, Dionicio Ángel; Colunga-Pedraza, Iris Jazmín; Azpiri-López, José Ramón; Wah-Suárez, Martín; Wimer-Castillo, Blanca Otilia; Salazar-Sepúlveda, Laura Leticia

2018-03-01

This study assesses the relationship between the ability to perform productive activities and the clinical characteristics of RA, such as disease activity, quality of life, functional capacity, workload, pharmacotherapy, and comorbidities. A cross-sectional, observational and descriptive study was conducted. Patients aged 18-75years with a diagnosis of RA according to ACR/EULAR 2010 criteria who attended regularly to the Rheumatology service in the period between January and March 2017 were included. The questionnaires, WPAI-AR, HAQ-DI and RAQoL, were applied. RA disease activity was measured by DAS28-PCR. Correlations were made between the clinical data obtained and work productivity and activity impairment measured by WPAI-AR. Two hundred four patients with a diagnosis of RA were included, of whom 92.6% were women. Mean age was 54.46±9.3years. Regarding the percentage of impairment of daily life activities, we found a significant difference between employed and unemployed patients (P≤.002). A positive correlation was found between RA activity measured by DAS28-PCR, quality of life, and functional ability with the percentages of absenteeism, presenteeism, overall productivity loss, and impairment of daily life activities. A correlation between RA disease activity, functional capacity, quality of life, and working impairment was found. The strongest association was established with the degree of functional capacity. Copyright © 2018 Elsevier España, S.L.U. and Sociedad Española de Reumatología y Colegio Mexicano de Reumatología. All rights reserved.

26 CFR 1.410(b)-5 - Average benefit percentage test.

Science.gov (United States)

2010-04-01

... benefit percentages may be determined on the basis of any definition of compensation that satisfies § 1... underlying definition of compensation that satisfies section 414(s). Except as otherwise specifically... definitions of section 414(s) compensation in the determination of rates; (B) Use of different definitions of...

75 FR 35098 - Federal Employees' Retirement System; Normal Cost Percentages

Science.gov (United States)

2010-06-21

... normal cost percentages and requests for actuarial assumptions and data to the Board of Actuaries, care of Gregory Kissel, Actuary, Office of Planning and Policy Analysis, Office of Personnel Management... Regulations, regulates how normal costs are determined. Recently, the Board of Actuaries of the Civil Service...

Profit and Risk Measures in Oil Production Optimization

DEFF Research Database (Denmark)

Capolei, Andrea; Foss, Bjarne; Jørgensen, John Bagterp

2015-01-01

In oil production optimization, we usually aim to maximize a deterministic scalar performance index such as the profit over the expected reservoir lifespan. However, when uncertainty in the parameters is considered, the profit results in a random variable that can assume a range of values dependi...... pro and cons for each of them. Finally, among the presented risk measures, we identify two of them as appropriate risk measures when minimizing the risk....

Measuring production loss due to health and work environment problems: construct validity and implications.

Science.gov (United States)

Karlsson, Malin Lohela; Bergström, Gunnar; Björklund, Christina; Hagberg, Jan; Jensen, Irene

2013-12-01

The aim was to validate two measures of production loss, health-related and work environment-related production loss, concerning their associations with health status and work environment factors. Validity was assessed by evaluating the construct validity. Health problems related and work environment-related problems (or factors) were included in separate analyses and evaluated regarding the significant difference in proportion of explained variation (R) of production loss. health problems production loss was not found to fulfill the criteria for convergent validity in this study; however, the measure of work environment-related production loss did fulfill the criteria that were set up. The measure of work environment-related production loss can be used to screen for production loss due to work environment problems as well as an outcome measure when evaluating the effect of organizational interventions.

Single Top quark production cross-section measurements using the ATLAS detector at the LHC

CERN Document Server

Jimenez Pena, Javier; The ATLAS collaboration

2018-01-01

Measurements of single top-quark production in proton-proton collisions are presented based on the 13 TeV and 8 TeV ATLAS datasets. In the leading order process, a W-boson is exchanged in the t-channel. The cross-section for the production of single top-quarks and single antitop-quarks, their ratio, as well as differential cross-section measurements are also reported. Measurements of the inclusive and differential cross-sections for the production of a single top quark in association with a W-boson, the second largest single top production mode are also presented. Evidence for the s-channel single top-quark production in the 8 TeV dataset is presented. Finally, the first measurement of the tZq electroweak production is presented. All measurements are compared to state-of-the art theoretical calculations. (On behalf of the ATLAS collaboration)

Improving Papanicolaou test quality and reducing medical errors by using Toyota production system methods.

Science.gov (United States)

Raab, Stephen S; Andrew-Jaja, Carey; Condel, Jennifer L; Dabbs, David J

2006-01-01

The objective of the study was to determine whether the Toyota production system process improves Papanicolaou test quality and patient safety. An 8-month nonconcurrent cohort study that included 464 case and 639 control women who had a Papanicolaou test was performed. Office workflow was redesigned using Toyota production system methods by introducing a 1-by-1 continuous flow process. We measured the frequency of Papanicolaou tests without a transformation zone component, follow-up and Bethesda System diagnostic frequency of atypical squamous cells of undetermined significance, and diagnostic error frequency. After the intervention, the percentage of Papanicolaou tests lacking a transformation zone component decreased from 9.9% to 4.7% (P = .001). The percentage of Papanicolaou tests with a diagnosis of atypical squamous cells of undetermined significance decreased from 7.8% to 3.9% (P = .007). The frequency of error per correlating cytologic-histologic specimen pair decreased from 9.52% to 7.84%. The introduction of the Toyota production system process resulted in improved Papanicolaou test quality.

RBANS memory percentage retention: No evidence of incremental validity beyond RBANS scores for diagnostic classification of mild cognitive impairment and dementia and for prediction of daily function.

Science.gov (United States)

Jodouin, Kara A; O'Connell, Megan E; Morgan, Debra G

2017-01-01

RBANS percentage retention scores may be useful for diagnosis, but their incremental validity is unclear. Percentage retention versus RBANS immediate and delayed memory subtests and delayed index scores were compared for diagnostic classification and for prediction of function. Data from 173 memory clinic patients with an interdisciplinary diagnosis (no cognitive impairment, amnestic mild cognitive impairment [aMCI], and dementia due to Alzheimer's disease [AD]) and complete RBANS data were analyzed. Across diagnostic contrasts, list percentage retention classification accuracy was similar to List Learning delayed recall, but below the Delayed Memory Index (DMI). Similarly, for classifying no cognitive impairment versus aMCI or dementia due to AD, story percentage retention was similar to Story Memory subtests and below the DMI. For classifying aMCI versus AD; however, Story Memory exceeded the DMI, but was similar to Story Memory subtest scores. Similarly, for prediction of function percentage retention measures did not predict variance beyond that predicted by the RBANS subtest or index scores. In sum, there is no evidence that calculation of percentage retention for RBANS adds clinical utility beyond those provided by the standard RBANS scores.

Measurements of the Vector boson production with the ATLAS Detector

CERN Document Server

Weber, Stephen Albert; The ATLAS collaboration

2018-01-01

Measurements of the Drell-Yan production of W and Z bosons at the LHC are an essential part of the ATLAS standard model physics program. These processes are a probe to understand perturbative QCD and the structure of the proton. Differential measurements of the Z boson cross section produced in association with jets can be compared to different LO and NLO MC generators to test the accuracy of these predictions. A selection of recent results are presented on varying studies of W and Z boson production.

26 CFR 1.42-8 - Election of appropriate percentage month.

Science.gov (United States)

2010-04-01

... Section 1.42-8 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY INCOME TAX INCOME TAXES Credits Against Tax § 1.42-8 Election of appropriate percentage month. (a) Election under section... previously placed in service under section 42(e). (5) Amount allocated. The housing credit dollar amount...

LEP measurements on production, mass, lifetime of beauty particles

International Nuclear Information System (INIS)

Wormser, G.

1993-10-01

Present knowledge about the individual properties of the different beauty particles is discussed using the results of the LEP experiments. Individual lifetimes for B d 0 and B + are found to be equal within 10% whilst a 15% precision is reached for B s 0 and Λ b . The Λ b lifetime is found to be smaller than τ B + with a 2.7 σ significance. The production rate of each of these particles is measured at the 20% level. Preliminary evidence for Ξ b production has been reported. Finally, the B s 0 meson mass has been measured to be 5373 ± 4 MeV/c 2 . (author) 24 refs., 9 figs., 5 tabs

Owners of nuclear power plants: Percentage ownership of commercial nuclear power plants by utility companies

International Nuclear Information System (INIS)

Wood, R.S.

1987-08-01

The following list indicates percentage ownership of commercial nuclear power plants by utility companies as of June 1, 1987. The list includes all plants licensed to operate, under construction, docked for NRC safety and environmental reviews, or under NRC antitrust review. It does not include those plants announced but not yet under review or those plants formally canceled. In many cases, ownership may be in the process of changing as a result of altered financial conditions, changed power needs, and other reasons. However, this list reflects only those ownership percentages of which the NRC has been formally notified. Part I lists plants alphabetically with their associated applicants/licensees and percentage ownership. Part II lists applicants/licensees alphabetically with their associated plants and percentage ownership. Part I also indicates which plants have received operating licenses (OL's). Footnotes for both parts appear at the end of this document

Measurements of the vector boson production with the ATLAS detector

Science.gov (United States)

Lapertosa, A.

2018-01-01

Measurements of the Drell-Yan production of W and Z bosons at the LHC provide a benchmark of our understanding of perturbative QCD and probe the proton structure in a unique way. The ATLAS collaboration has performed new high precision measurements at a center-of-mass energy of 7 TeV. The measurements are performed for W+, W- and Z bosons integrated and as a function of the boson or lepton rapidity and the Z mass. Unprecedented precision is reached and strong constraints on Parton Distribution Functions, in particular the strange density are found. Z boson cross sections are also measured at center-of-mass energies of 8 TeV and 13 TeV, and cross-section ratios to the top-quark pair production have been derived. This ratio measurement leads to a cancellation of systematic effects and allows for a high precision comparison to the theory predictions. The production of jets in association with vector bosons is a further important process to study perturbative QCD in a multi-scale environment. The ATLAS collaboration has performed new measurements of Z boson plus jets cross sections, differential in several kinematic variables, in proton-proton collision data taken at a center-of-mass energy of 13 TeV. The measurements are compared to state-of-the art theory predictions. They are sensitive to higher-order pQCD effects, probe flavour and mass schemes and can be used to constrain the proton structure. In addition, a new measurement of the splitting scales of the kt jet-clustering algorithm for final states containing a Z boson candidate at a center-of-mass energy of 8 TeV is presented.

On-line tritium production and heat deposition rate measurements at the Lotus facility

International Nuclear Information System (INIS)

Joneja, O.P.; Scherrer, P.; Anand, R.P.

1994-01-01

Integral tritium production and heat deposition measurement in a prototype fusion blanket would enable verification of the computational codes and the data based employed for the calculations. A large number of tritium production rate measurements have been reported for different type of blankets, whereas the direct heat deposition due to the mixed radiation field in the fusion environment, is still in its infancy. In order to ascertain the kerma factors and the photon production libraries, suitable techniques must be developed to directly measure the nuclear heat deposition rates in the materials required for the fusion systems. In this context, at the Lotus facility, we have developed an extremely efficient double ionizing chamber, for the on-line tritium production measurements and employed a pure graphite calorimeter to measure the nuclear heat deposition due to the mixed radiation field of the 14 MeV, Haefely neutron generator. This paper presents both systems and some of the recent measurements. (authors). 8 refs., 13 figs

Latest LHCb measurements of Electroweak Boson Production in Run-1

CERN Document Server

CERN. Geneva

2015-01-01

We present the latest LHCb measurements of forward Electroweak Boson Production using proton-proton collisions recorded in LHC Run-1. The seminar shall discuss measurements of the 8 TeV W & Z boson production cross-sections. These results make use of LHCb's excellent integrated luminosity determination to provide constraints on the parton distribution functions which describe the inner structure of the proton. These LHCb measurements probe a region of phase space at low Bjorken-x where the other LHC experiments have limited sensitivity. We also present measurements of cross-section ratios, and ratios of results in 7 TeV and 8 TeV proton-proton collisions. These results provide precision tests of the Standard Model. The seminar shall also present a measurement of the forward-backward asymmetry (A_FB) in Z boson decays to two muons. This result allows for precision tests of the coupling of the Z boson to left and right handed particles, providing sensitivity to the effective weak mixing angle (...

Measurement of W/Z production with the ATLAS detector

CERN Document Server

Sauvan, JB; The ATLAS collaboration

2012-01-01

The production of W and Z bosons at the LHC has been measured with the ATLAS detector. These measurements include inclusive and differential cross sections, $W$ polarisation, and the polarisation of tau leptons from W decays. They show sensitivity to the proton structure and are also used to test predictions from perturbative QCD and phenomenological models.

Method s for Measuring Productivity in Libraries and Information Centres

OpenAIRE

Mohammad Alaaei

2009-01-01

  Within Information centers, productivity is the result of optimal and effective use of information resources, service quality improvement, increased user satisfaction, pleasantness of working environment, increased motivation and enthusiasm of staff to work better. All contribute to the growth and development of information centers. Thus these centers would need to be familiar with methods employed in productivity measurement. Productivity is one of the criteria for evaluating system perfor...

Monte Carlo Method with Heuristic Adjustment for Irregularly Shaped Food Product Volume Measurement

Directory of Open Access Journals (Sweden)

Joko Siswantoro

2014-01-01

Full Text Available Volume measurement plays an important role in the production and processing of food products. Various methods have been proposed to measure the volume of food products with irregular shapes based on 3D reconstruction. However, 3D reconstruction comes with a high-priced computational cost. Furthermore, some of the volume measurement methods based on 3D reconstruction have a low accuracy. Another method for measuring volume of objects uses Monte Carlo method. Monte Carlo method performs volume measurements using random points. Monte Carlo method only requires information regarding whether random points fall inside or outside an object and does not require a 3D reconstruction. This paper proposes volume measurement using a computer vision system for irregularly shaped food products without 3D reconstruction based on Monte Carlo method with heuristic adjustment. Five images of food product were captured using five cameras and processed to produce binary images. Monte Carlo integration with heuristic adjustment was performed to measure the volume based on the information extracted from binary images. The experimental results show that the proposed method provided high accuracy and precision compared to the water displacement method. In addition, the proposed method is more accurate and faster than the space carving method.

Monte Carlo method with heuristic adjustment for irregularly shaped food product volume measurement.

Science.gov (United States)

Siswantoro, Joko; Prabuwono, Anton Satria; Abdullah, Azizi; Idrus, Bahari

2014-01-01

Volume measurement plays an important role in the production and processing of food products. Various methods have been proposed to measure the volume of food products with irregular shapes based on 3D reconstruction. However, 3D reconstruction comes with a high-priced computational cost. Furthermore, some of the volume measurement methods based on 3D reconstruction have a low accuracy. Another method for measuring volume of objects uses Monte Carlo method. Monte Carlo method performs volume measurements using random points. Monte Carlo method only requires information regarding whether random points fall inside or outside an object and does not require a 3D reconstruction. This paper proposes volume measurement using a computer vision system for irregularly shaped food products without 3D reconstruction based on Monte Carlo method with heuristic adjustment. Five images of food product were captured using five cameras and processed to produce binary images. Monte Carlo integration with heuristic adjustment was performed to measure the volume based on the information extracted from binary images. The experimental results show that the proposed method provided high accuracy and precision compared to the water displacement method. In addition, the proposed method is more accurate and faster than the space carving method.

LHCb: Measurement of $J/\\psi$ production cross-section at LHCb

CERN Multimedia

Zhang, Y

2011-01-01

The measurement of the $J/\\psi$ production cross-section with the LHCb detector is presented. The cross-section is measured as a function of the $J/\\psi$ transverse momentum and rapidity, in the forward region. Contributions from prompt $J/\\psi$ and $J/\\psi$ from $b$ are measured separately. Prospects for measurements of the $J/\\psi$ polarisation with a full angular analysis are also shown.

Accredited dose measurements for validation of radiation sterilized products

DEFF Research Database (Denmark)

Miller, A.

1993-01-01

for control of radiation sterilization. The accredited services include: 1. 1. Irradiation of dosimeters and test samples with cobalt-60 gamma rays. 2. 2. Irradiation of dosimeters and test samples with 10 MeV electrons. 3. 3. Issue of and measurement with calibrated dosimeters. 4. 4. Measurement...... of the dosimetric parameters of an irradiation facility. 5. 5. Measurement of absorbed dose distribution in irradiated products. The paper describes these services and the procedures necessary for their execution....

Percentage tumor necrosis following chemotherapy in neuroblastoma correlates with MYCN status but not survival.

Science.gov (United States)

Bomken, Simon; Davies, Beverley; Chong, Leeai; Cole, Michael; Wood, Katrina M; McDermott, Michael; Tweddle, Deborah A

2011-03-01

The percentage of chemotherapy-induced necrosis in primary tumors corresponds with outcome in several childhood malignancies, including high-risk metastatic diseases. In this retrospective pilot study, the authors assessed the importance of postchemotherapy necrosis in high-risk neuroblastoma with a histological and case notes review of surgically resected specimens. The authors reviewed all available histology of 31 high-risk neuroblastoma cases treated with COJEC (dose intensive etoposide and vincristine with either cyclophosphamide, cisplatin or carboplatin) or OPEC/OJEC (etoposide, vincristine and cyclophosphamide with alternating cisplatin [OPEC] or carboplatin [OJEC]) induction chemotherapy in 2 Children's Cancer & Leukaemia Group (CCLG) pediatric oncology centers. The percentage of postchemotherapy necrosis was assessed and compared with MYCN amplification status and overall survival. The median percentage of postchemotherapy tumor necrosis was 60%. MYCN status was available for 28 cases, of which 12 were amplified (43%). Survival in cases with ≥ 60% necrosis or ≥ 90% necrosis was not better than those with less necrosis, nor was percentage necrosis associated with survival using Cox regression. However, MYCN-amplified tumors showed a higher percentage of necrosis than non-MYCN-amplified tumors, 71.3% versus 37.2% (P = .006). This effect was not related to prechemotherapy necrosis and did not confer improved overall survival. Postchemotherapy tumor necrosis is higher in patients with MYCN amplification. In this study, postchemotherapy necrosis did not correlate with overall survival and should not lead to modification of postoperative treatment. However, these findings need to be confirmed in a larger prospective study of children with high-risk neuroblastoma.

Top quark pair production cross-section measurements and measurements of $t\\bar{t}+X$ with the ATLAS and CMS detectors

CERN Document Server

Sidoti, Antonio; The ATLAS collaboration

2016-01-01

We present measurements of the inclusive and differential top-quark pair production cross sections in proton-proton collisions with the ATLAS and CMS detector at the LHC. Measurements have been performed at a center of mass energy of 8 TeV and 13 TeV. The inclusive measurements reach high precision and are compared to the best available theoretical calculations. Differential measurements of the kinematic properties of top quark pair production are also discussed. The production of top-quark pairs in association with W and Z bosons is also presented. These processes are important backgrounds to searches for new physics and are all compared to the best available theoretical calculations.

Evaluation of electron mobility in InSb quantum wells by means of percentage-impact

International Nuclear Information System (INIS)

Mishima, T. D.; Edirisooriya, M.; Santos, M. B.

2014-01-01

In order to quantitatively analyze the contribution of each scattering factor toward the total carrier mobility, we use a new convenient figure-of-merit, named a percentage impact. The mobility limit due to a scattering factor, which is widely used to summarize a scattering analysis, has its own advantage. However, a mobility limit is not quite appropriate for the above purpose. A comprehensive understanding of the difference in contribution among many scattering factors toward the total carrier mobility can be obtained by evaluating percentage impacts of scattering factors, which can be straightforwardly calculated from their mobility limits and the total mobility. Our percentage impact analysis shows that threading dislocation is one of the dominant scattering factors for the electron transport in InSb quantum wells at room temperature

Measurement of plasma production and neutralization in gas neutralizers

International Nuclear Information System (INIS)

Maor, D.; Meron, M.; Johnson, B.; Jones, K.; Agagu, A.; Hu, B.

1986-01-01

In order to satisfy the need of experimental data for the designing of gas neutralizers we have started a project aimed at measuring all relevant cross sections for the charge exchange of H - , H 0 and H + projectiles, as well as the cross sections for the production of ions in the target. The expected results of these latter measurements are shown schematically

Productivity and technical efficiency of suckler beef production systems: trends for the period 1990 to 2012.

Science.gov (United States)

Veysset, P; Lherm, M; Roulenc, M; Troquier, C; Bébin, D

2015-12-01

Over the past 23 years (1990 to 2012), French beef cattle farms have expanded in size and increased labour productivity by over 60%, chiefly, though not exclusively, through capital intensification (labour-capital substitution) and simplifying herd feeding practices (more concentrates used). The technical efficiency of beef sector production systems, as measured by the ratio of the volume value (in constant euros) of farm output excluding aids to volume of intermediate consumption, has fallen by nearly 20% while income per worker has held stable thanks to subsidies and the labour productivity gains made. This aggregate technical efficiency of beef cattle systems is positively correlated to feed self-sufficiency, which is in turn negatively correlated to farm and herd size. While volume of farm output per hectare of agricultural area has not changed, forage feed self-sufficiency decreased by 6 percentage points. The continual increase in farm size and labour productivity has come at a cost of lower production-system efficiency - a loss of technical efficiency that 20 years of genetic, technical, technological and knowledge-driven progress has barely managed to offset.

Characterization of Adipose Tissue Product Quality Using Measurements of Oxygen Consumption Rate.

Science.gov (United States)

Suszynski, Thomas M; Sieber, David A; Mueller, Kathryn; Van Beek, Allen L; Cunningham, Bruce L; Kenkel, Jeffrey M

2018-03-14

Fat grafting is a common procedure in plastic surgery but associated with unpredictable graft retention. Adipose tissue (AT) "product" quality is affected by the methods used for harvest, processing and transfer, which vary widely amongst surgeons. Currently, there is no method available to accurately assess the quality of AT. In this study, we present a novel method for the assessment of AT product quality through direct measurements of oxygen consumption rate (OCR). OCR has exhibited potential in predicting outcomes following pancreatic islet transplant. Our study aim was to reapportion existing technology for its use with AT preparations and to confirm that these measurements are feasible. OCR was successfully measured for en bloc and postprocessed AT using a stirred microchamber system. OCR was then normalized to DNA content (OCR/DNA), which represents the AT product quality. Mean (±SE) OCR/DNA values for fresh en bloc and post-processed AT were 149.8 (± 9.1) and 61.1 (± 6.1) nmol/min/mg DNA, respectively. These preliminary data suggest that: (1) OCR and OCR/DNA measurements of AT harvested using conventional protocol are feasible; and (2) standard AT processing results in a decrease in overall AT product quality. OCR measurements of AT using existing technology can be done and enables accurate, real-time, quantitative assessment of the quality of AT product prior to transfer. The availability and further validation of this type of assay could enable optimization of fat grafting protocol by providing a tool for the more detailed study of procedural variables that affect AT product quality.

Serum percentage undercarboxylated osteocalcin, a sensitive measure of vitamin K status, and its relationship to bone health indices in Danish girls

DEFF Research Database (Denmark)

O'Connor, Eibhlis; Mølgaard, Christian; Michaelsen, Kim F.

2007-01-01

Recent cross-sectional data suggest that better vitamin K status in young girls (aged 3-16 years) is associated with decreased bone turnover, even though it is not associated with bone mineral content (BMC). The objective of the present study was to investigate the relationship between serum...... percentage of undercarboxylated osteocalcin (%ucOC), as an index of vitamin K status, and BMC and biochemical indices of bone turnover in peri-pubertal Danish girls. This peri-pubertal stage is a dynamic period of bone development, and as such, may represent an important window of opportunity for vitamin K...

Measuring and managing radiologist productivity, part 1: clinical metrics and benchmarks.

Science.gov (United States)

Duszak, Richard; Muroff, Lawrence R

2010-06-01

Physician productivity disparities are not uncommonly debated within radiology groups, sometimes in a contentious manner. Attempts to measure productivity, identify and motivate outliers, and develop equitable management policies can present challenges to private and academic practices alike but are often necessary for a variety of professional, financial, and personnel reasons. This is the first of a two-part series that will detail metrics for evaluating radiologist productivity and review published benchmarks, focusing primarily on clinical work. Issues and limitations that may prevent successful implementation of measurement systems are explored. Part 2 will expand that discussion to evaluating nonclinical administrative and academic activities, outlining advantages and disadvantages of addressing differential productivity, and introducing potential models for practices seeking to motivate physicians on the basis of both clinical and nonclinical work.

Evidence for WZ Production and a Measurement of the WZ Production Cross Section

Energy Technology Data Exchange (ETDEWEB)

Degenhardt, James D. [Univ. of Michigan, Ann Arbor, MI (United States)

2007-05-01

This dissertation describes a test of the Standard Model (SM) of particle physics by measuring the probability, or cross section, of simultaneously producing a W boson and a Z boson from proton-antiproton collisions. The SM predicts the cross section of WZ production to be 3.68 ± 0.25 pb. The SM and physics of WZ production are described in Chapter 2 of this dissertation. The 1.96 TeV center-of-mass energy proton-antiproton collisions are provided by the Fermi National Accelerator Laboratory (FNAL) Tevatron Collider. The W and Z particles are detected using the D0 detector, which is described in Chapter 3. The data were collected by the detector during 2002-2006 corresponding to 1 fb^-1 of p{bar p} collisions. This data set is described in Chapter 6. The measurement uses the trilepton (evee, μvee, evμμ, and μvμμ) decay channels, in which a W decays to a charged lepton plus a neutrino and a Z decays to a pair of charged leptons. The W and Z particle selection criteria, detection efficiency, and background determination are described in Chapter 7. We observe 13 candidate events in 1 fb^-1 of p$\\bar{p}$ collisions. In this data set we expect to see 4.5 ± 0.6 background events, and we expect to see 9.2 ± 1.0 signal events. The probability of 4.5 ± 0.6 background events to fluctuate to 13 or more events is 1.2 x 10^-3 which is a 3.0 σ deviation from the background estimate. A log likelihood method is used to determine the most likely cross section as determined by the measured signal efficiencies, the expected backgrounds, and the observed data. Presented in Chapter 8 is a measurement of the cross section for p$\\bar{p}$ → WZ + X at √s = 1.96 TeV. The WZ diboson production cross section is measured to be σ_WZ = 2.7$+1.7\\atop{-1.3}$ pb. This is in agreement with the predicted Standard Model cross section.

ATLAS reach for Quarkonium production and polarization measurements

CERN Document Server

Etzion, Erez; 8th International Conference on Hyperons, Charm and Beauty Hadrons

2009-01-01

The ATLAS detector at CERN's LHC is preparing to take data from the first proton-proton collisions expected in the next few months. We report on the analysis of simulated data samples for production of heavy Quarkonium states J/psi and Upsilon, corresponding to an integrated luminosity of 10 pb^-1 with center of mass energy of 14 TeV expected at the early ATLAS data. We review various aspects of prompt Quarkonium production at LHC: the accessible ranges in transverse momentum and pseudorapidity, spin alignment of vector states, separation of color octet and color singlet production mechanism and feasibility of observing radiative decays Xi_c and Xi_b decays. Strategies of various measurements are outlined and methods of separating promptly produced J/psi and Upsilon mesons from various backgrounds are discussed.

Association Between Hospitals Caring for a Disproportionately High Percentage of Minority Trauma Patients and Increased Mortality

Science.gov (United States)

Haider, Adil H.; Ong’uti, Sharon; Efron, David T.; Oyetunji, Tolulope A.; Crandall, Marie L.; Scott, Valerie K.; Haut, Elliott R.; Schneider, Eric B.; Powe, Neil R.; Cooper, Lisa A.; Cornwell, Edward E.

2012-01-01

Objective To determine whether there is an increased odds of mortality among trauma patients treated at hospitals with higher proportions of minority patients (ie, black and Hispanic patients combined). Design Hospitals were categorized on the basis of the percentage of minority patients admitted with trauma. The adjusted odds of in-hospital mortality were compared between hospitals with less than 25% of patients who were minorities (the reference group) and hospitals with 25% to 50% of patients who were minorities and hospitals with more than 50% of patients who were minorities. Multivariate logistic regression (with generalized linear modeling and a cluster-correlated robust estimate of variance) was used to control for multiple patient and injury severity characteristics. Setting A total of 434 hospitals in the National Trauma Data Bank. Participants Patients aged 18 to 64 years whose medical records were included in the National Trauma Data Bank for the years 2007 and 2008 with an Injury Severity Score of 9 or greater and who were white, black, or Hispanic. Main Outcome Measures Crude mortality and adjusted odds of in-hospital mortality. Results A total of 311 568 patients were examined. Hospitals in which the percentage of minority patients was more than 50% also had younger patients, fewer female patients, more patients with penetrating trauma, and the highest crude mortality. After adjustment for potential confounders, patients treated at hospitals in which the percentage of minority patients was 25% to 50% and at hospitals in which the percentage of minority patients was more than 50% demonstrated increased odds of death (adjusted odds ratio, 1.16 [95% confidence interval, 1.01–1.34] and adjusted odds ratio, 1.37 [95% confidence interval, 1.16–1.61], respectively), compared with the reference group. This disparity increased further on subset analysis of patients with a blunt injury. Uninsured patients had significantly increased odds of mortality within

Population-Attributable Risk Percentages for Racialized Risk Environments

Science.gov (United States)

Arriola, Kimberly Jacob; Haardörfer, Regine; McBride, Colleen M.

2016-01-01

Research about relationships between place characteristics and racial/ethnic inequities in health has largely ignored conceptual advances about race and place within the discipline of geography. Research has also almost exclusively quantified these relationships using effect estimates (e.g., odds ratios), statistics that fail to adequately capture the full impact of place characteristics on inequities and thus undermine our ability to translate research into action. We draw on geography to further develop the concept of “racialized risk environments,” and we argue for the routine calculation of race/ethnicity-specific population-attributable risk percentages. PMID:27552263

Measurement of open beauty production at HERA in the D*μ final state

International Nuclear Information System (INIS)

Chekanov, S.; Derrick, M.; Magill, S.

2006-09-01

The production of beauty quarks with a D *± and a muon in the final state has been measured with the ZEUS detector at HERA using an integrated luminosity of 114 pb -1 . Low transverse-momentum thresholds for the muon and D * meson allow a measurement of beauty production closer to the production threshold than previous measurements. The beauty signal was extracted using the charge correlations and angular distributions of the muon with respect to the D * meson. Cross sections for photoproduction and deep inelastic scattering are somewhat higher than, but compatible with, next-to-leading-order QCD predictions, and compatible with other measurements. (orig.)

[Relationship between hypertension and percentage of body fat, in children of Anhui province].

Science.gov (United States)

Tao, R W; Wan, Y H; Zhang, H; Wang, Y F; Wang, B; Xu, L; Zuo, A Z; Tong, S L; Tao, F B

2016-02-01

To study the situation of hypertension among children in Anhui province and to analyze its association with the percentage of body fat. A total of 8 890 aged 7-17 years old children, were tested for blood pressure and thickness of skin fold in Anhui province. Hypertension in children was diagnosed referring to the 2010 Chinese guidelines for the management of hypertension (revised in 2010). The percentage of body fat was calculated according to the thickness of skin fold and specific formulas. METHODS used for statistics analysis would include t test, χ(2) test while logistic regression was used to analyze the relationship between percentage of body fat in children and adolescents. In total, 8 890 subjects aged 7-17 years were recruited, in Anhui province. The prevalence of hypertension in Children aged 7-17 was 13.6%, with the total number of hypertension as 1 210, in Anhui province. There were significant differences in the prevalence of hypertension among urban and rural children. Both prevalence of hypertension among boys and girls in urban area appeared higher than those in the rural area. In the urban areas, the prevalence rates of hypertension in both boys and girls were higher than the ones in rural area (χ(2) values were 36.36, 7.79, 42.10 and 13.77, respectively, and Pfat between boys and girls from the rural or urban areas were both significant.OR values of the boys and girls of group P(40)- and P(60)-were 1.65 and 1.75, respectively. Risks of hypertension in boys and girls showed significantly increase by P(40) and P(60), respectively. The prevalence of hypertension in both boys and girls increased along with the increase of the percentage on body fat. Since higher percentage of body fat could increase the risk of hypertension, reduction of body fat content would be beneficial to the success of prevention and control of hypertension in children.

Top quark pair production measurements using the ATLAS detector at the LHC

CERN Document Server

Yamauchi, Katsuya; The ATLAS collaboration

2015-01-01

Measurements of the inclusive top quark pair production cross sections in proton-proton collisions with the ATLAS detector at the Large Hadron Collider are presented. The most precise result requires opposite sign electrons and muons and uses the full data-set at a centre-of-mass energy of 7 and 8 TeV. In addition, differential measurements of the top transverse momentum and kinematic properties of the top-anti-top pair are discussed. These measurements, including results using boosted tops, probe our understanding of top pair production in the TeV regime. The results, unfolded to particle and parton level, are compared to recent Monte Carlo generators implementing LO and NLO matrix elements matched with parton showers and NLO QCD calculations. In addition, measurements of the production of top quark pairs in association with gauge bosons or jets are presented.

Measurement of Single-top t-channel Production Using ATLAS Data

CERN Document Server

Holzbauer, Jenny; Schwienhorst, R; Repko, W; Lapidus, L; Pratt, S

2012-01-01

This document reports the measurement of the single-top t-channel cross-section using data from the ATLAS detector, located at the Large Hadron Collider on the border of France and Switzerland. The data used were collected during the first half of 2011, from proton-proton collisions with a 7 TeV center-of-mass collision energy. Single-top is electroweak top-quark production and t-channel is one of the standard model production modes. To isolate this production, selections are applied to find events with a similar final state. A cut-based analysis is used to further isolate the signal using a series of selections in several orthogonal kinematic regions. Finally, a statistical analysis is performed to determine the measured cross-section and the CKM matrix element |Vtb|. The cross-section for top and anti-top production is considered separately and the resulting cross-sections are σ t+ = 59 +18 -16 pb for the positive charge channel and σ t- = 33 +13 -12 pb for the negative charge chan...

New method of noncontact temperature measurement in on-line textile production

Science.gov (United States)

Cheng, Xianping; Song, Xing-Li; Deng, Xing-Zhong

1993-09-01

Based on the condition of textile production the method of infrared non-contact temperature measurement is adcpted in the heat-setting and drying heat-treatment process . This method is used to monitor the moving cloth. The temperature of the cloth is displayed rapidly and exactly. The principle of the temperature measurement is analysed theoretically in this paper. Mathematical analysis and calculation are used for introducing signal transmitting method. Adopted method of combining software with hardware the temperature is corrected and compensated with the aid of a single-chip microcomputer. The results of test indicate that the application of temperature measurement instrument provides reliable parameters in the quality control. And it is an important measure on improving the quality of products.

Marathon performance in relation to body fat percentage and training indices in recreational male runners.

Science.gov (United States)

Tanda, Giovanni; Knechtle, Beat

2013-01-01

The purpose of this study was to investigate the effect of anthropometric characteristics and training indices on marathon race times in recreational male marathoners. Training and anthropometric characteristics were collected for a large cohort of recreational male runners (n = 126) participating in the Basel marathon in Switzerland between 2010 and 2011. Among the parameters investigated, marathon performance time was found to be affected by mean running speed and the mean weekly distance run during the training period prior to the race and by body fat percentage. The effect of body fat percentage became significant as it exceeded a certain limiting value; for a relatively low body fat percentage, marathon performance time correlated only with training indices. Marathon race time may be predicted (r = 0.81) for recreational male runners by the following equation: marathon race time (minutes) = 11.03 + 98.46 exp(-0.0053 mean weekly training distance [km/week]) + 0.387 mean training pace (sec/km) + 0.1 exp(0.23 body fat percentage [%]). The marathon race time results were valid over a range of 165-266 minutes.

Hierarchical structure of the European countries based on debts as a percentage of GDP during the 2000-2011 period

Science.gov (United States)

Kantar, Ersin; Deviren, Bayram; Keskin, Mustafa

2014-11-01

We investigate hierarchical structures of the European countries by using debt as a percentage of Gross Domestic Product (GDP) of the countries as they change over a certain period of time. We obtain the topological properties among the countries based on debt as a percentage of GDP of European countries over the period 2000-2011 by using the concept of hierarchical structure methods (minimal spanning tree, (MST) and hierarchical tree, (HT)). This period is also divided into two sub-periods related to 2004 enlargement of the European Union, namely 2000-2004 and 2005-2011, in order to test various time-window and observe the temporal evolution. The bootstrap techniques is applied to see a value of statistical reliability of the links of the MSTs and HTs. The clustering linkage procedure is also used to observe the cluster structure more clearly. From the structural topologies of these trees, we identify different clusters of countries according to their level of debts. Our results show that by the debt crisis, the less and most affected Eurozone’s economies are formed as a cluster with each other in the MSTs and hierarchical trees.

Higher Education R&D and Productivity Growth: An Empirical Study on High-Income OECD Countries

Science.gov (United States)

Eid, Ashraf

2012-01-01

This paper is a macro study on higher education R&D and its impact on productivity growth. I measure the social rate of return on higher education R&D in 17 high-income OECD countries using country level data on the percentage of gross expenditure on R&D performed by higher education, business, and government sectors over the period…

Use of enzymes in diets with different percentages of added fat for broilers

Directory of Open Access Journals (Sweden)

F.G.P. Costa

2013-06-01

Full Text Available We assessed the extent to which the removal of fat source, and consequently its compounds, such as linoleic acid, can affect the performance of broilers. We used 600 male Cobb 500 day old chicks. The birds were distributed in a completely randomized experimental design, with five treatments and six replicates of 20 birds each. The treatments were: (T1 diet - positive control (PC, which met the nutritional needs; (T2 diet - negative control (CN, a reduction of 100kcal/kg and low linoleic acid content; (T3: diet - negative control reformulated for low linoleic acid content and a set of Quantum phytase XT and Econase XT 25 (BAL + QFit-Eco, (T4: diet - negative control reformulated, with the percentage of linoleic acid adjusted to an intermediate value between the value of the diet and diet CP and CN to use a set of Quantum phytase XT and XT Econase 25 (IAL + QFit-Eco and (T5: diet - negative control reformulated, with the percentage of linoleic acid adjusted to a value similar to that of the positive control diet and joint use of Quantum phytase XT and XT Econase 25 (AAL + QFit-Eco. The joint use of Quantum Phytase and Econase promoted improvement in the performance of broilers from 1 to 21 days. The greatest weight gain was obtained with diets containing percentages of total fat and linoleic acids. Dietary supplementation with enzymes resulted in higher levels of calcium in the tibia, whatever the percentage of linoleic studied.

Economic base determination and influence of several variables against contributions percentage of the GDRP in Aceh Besar district

Science.gov (United States)

Andayani, Keumala; Miftahuddin

2018-05-01

The percentage contribution of Gross Regional Domestic Product (GRDP) in Aceh Besar district is influenced by several leading sectors, such as agriculture, building sector, trade, hotel and restaurant sector, transport and communications, financial sector, leasing and business services, and services sector. Based on the use of Location Quotient (LQ) method and multiple regression model, the effect of labor variables and population to Gross Regional Domestic Product by 2000 constant prices for agriculture and trade. For each addition of one workforce in the trading sector, the trade sector contribution will increase by 0.000014157%. Thus, the trade sector contribution will increase by 0.0000013786% in every addition of one soul of the population. Whereas, for every addition of one human resource in the agricultural sector will be reduced by 0.0002%. In other words, for each addition of one soul of the population will reduce the contribution of the agricultural sector by 0.00008611%.

Comparison of the Percentage Stance and Swing Phases and Ground Reaction Force between Young and Older Adults during Walking at different speeds

Directory of Open Access Journals (Sweden)

Neda Brooshak

2017-09-01

Conclusion: In general, the percentage of stance and swing phases of a gait cycle is similar between young and older adults. Lower VGRFs of weight acceptance and push off phases in the elders reflects the weakness of the knee extensor, hip extensors and ankle plantar flexors. It seems that older adults reduce the rate of force production during fast gait to achieve the necessary capacity for power generation and thereby, overcome the weakness of the lower extremity muscles.

Measurement of isolated photon production in deep-inelastic scattering at HERA

Science.gov (United States)

Aaron, F. D.; Aktas, A.; Alexa, C.; Andreev, V.; Antunovic, B.; Aplin, S.; Asmone, A.; Astvatsatourov, A.; Backovic, S.; Baghdasaryan, A.; Baranov, P.; Barrelet, E.; Bartel, W.; Baudrand, S.; Beckingham, M.; Begzsuren, K.; Behnke, O.; Behrendt, O.; Belousov, A.; Berger, N.; Bizot, J. C.; Boenig, M.-O.; Boudry, V.; Bozovic-Jelisavcic, I.; Bracinik, J.; Brandt, G.; Brinkmann, M.; Brisson, V.; Bruncko, D.; Büsser, F. W.; Bunyatyan, A.; Buschhorn, G.; Bystritskaya, L.; Campbell, A. J.; Cantun Avila, K. B.; Cassol-Brunner, F.; Cerny, K.; Cerny, V.; Chekelian, V.; Cholewa, A.; Contreras, J. G.; Coughlan, J. A.; Cozzika, G.; Cvach, J.; Dainton, J. B.; Daum, K.; Deak, M.; de Boer, Y.; Delcourt, B.; Del Degan, M.; Delvax, J.; de Roeck, A.; de Wolf, E. A.; Diaconu, C.; Dodonov, V.; Dubak, A.; Eckerlin, G.; Efremenko, V.; Egli, S.; Eichler, R.; Eisele, F.; Eliseev, A.; Elsen, E.; Essenov, S.; Falkiewicz, A.; Faulkner, P. J. W.; Favart, L.; Fedotov, A.; Felst, R.; Feltesse, J.; Ferencei, J.; Finke, L.; Fleischer, M.; Fomenko, A.; Franke, G.; Frisson, T.; Gabathuler, E.; Gayler, J.; Ghazaryan, S.; Ginzburgskaya, S.; Glazov, A.; Glushkov, I.; Goerlich, L.; Goettlich, M.; Gogitidze, N.; Gorbounov, S.; Gouzevitch, M.; Grab, C.; Greenshaw, T.; Grell, B. R.; Grindhammer, G.; Habib, S.; Haidt, D.; Hansson, M.; Heinzelmann, G.; Helebrant, C.; Henderson, R. C. W.; Henschel, H.; Herrera, G.; Hildebrandt, M.; Hiller, K. H.; Hoffmann, D.; Horisberger, R.; Hovhannisyan, A.; Hreus, T.; Jacquet, M.; Janssen, M. E.; Janssen, X.; Jemanov, V.; Jönsson, L.; Johnson, D. P.; Jung, A. W.; Jung, H.; Kapichine, M.; Katzy, J.; Kenyon, I. R.; Kiesling, C.; Klein, M.; Kleinwort, C.; Klimkovich, T.; Kluge, T.; Knutsson, A.; Korbel, V.; Kostka, P.; Kraemer, M.; Krastev, K.; Kretzschmar, J.; Kropivnitskaya, A.; Krüger, K.; Landon, M. P. J.; Lange, W.; Laštovička-Medin, G.; Laycock, P.; Lebedev, A.; Leibenguth, G.; Lendermann, V.; Levonian, S.; Li, G.; Lindfeld, L.; Lipka, K.; Liptaj, A.; List, B.; List, J.; Loktionova, N.; Lopez-Fernandez, R.; Lubimov, V.; Lucaci-Timoce, A.-I.; Lytkin, L.; Makankine, A.; Malinovski, E.; Marage, P.; Marti, L.; Martisikova, M.; Martyn, H.-U.; Maxfield, S. J.; Mehta, A.; Meier, K.; Meyer, A. B.; Meyer, H.; Meyer, H.; Meyer, J.; Michels, V.; Mikocki, S.; Milcewicz-Mika, I.; Mohamed, A.; Moreau, F.; Morozov, A.; Morris, J. V.; Mozer, M. U.; Müller, K.; Murín, P.; Nankov, K.; Naroska, B.; Naumann, T.; Newman, P. R.; Niebuhr, C.; Nikiforov, A.; Nowak, G.; Nowak, K.; Nozicka, M.; Oganezov, R.; Olivier, B.; Olsson, J. E.; Osman, S.; Ozerov, D.; Palichik, V.; Panagoulias, I.; Pandurovic, M.; Papadopoulou, T.; Pascaud, C.; Patel, G. D.; Peng, H.; Perez, E.; Perez-Astudillo, D.; Perieanu, A.; Petrukhin, A.; Picuric, I.; Piec, S.; Pitzl, D.; Plačakytė, R.; Polifka, R.; Povh, B.; Preda, T.; Prideaux, P.; Radescu, V.; Rahmat, A. J.; Raicevic, N.; Ravdandorj, T.; Reimer, P.; Risler, C.; Rizvi, E.; Robmann, P.; Roland, B.; Roosen, R.; Rostovtsev, A.; Rurikova, Z.; Rusakov, S.; Salek, D.; Salvaire, F.; Sankey, D. P. C.; Sauter, M.; Sauvan, E.; Schmidt, S.; Schmitt, S.; Schmitz, C.; Schoeffel, L.; Schöning, A.; Schultz-Coulon, H.-C.; Sefkow, F.; Shaw-West, R. N.; Sheviakov, I.; Shtarkov, L. N.; Sloan, T.; Smiljanic, I.; Smirnov, P.; Soloviev, Y.; South, D.; Spaskov, V.; Specka, A.; Staykova, Z.; Steder, M.; Stella, B.; Stiewe, J.; Straumann, U.; Sunar, D.; Sykora, T.; Tchoulakov, V.; Thompson, G.; Thompson, P. D.; Toll, T.; Tomasz, F.; Tran, T. H.; Traynor, D.; Trinh, T. N.; Truöl, P.; Tsakov, I.; Tseepeldorj, B.; Tsipolitis, G.; Tsurin, I.; Turnau, J.; Tzamariudaki, E.; Urban, K.; Utkin, D.; Valkárová, A.; Vallée, C.; van Mechelen, P.; Vargas Trevino, A.; Vazdik, Y.; Vinokurova, S.; Volchinski, V.; Weber, G.; Weber, R.; Wegener, D.; Werner, C.; Wessels, M.; Wissing, C.; Wolf, R.; Wünsch, E.; Xella, S.; Yeganov, V.; Žáček, J.; Zálešák, J.; Zhang, Z.; Zhelezov, A.; Zhokin, A.; Zhu, Y. C.; Zimmermann, T.; Zohrabyan, H.; Zomer, F.

2008-04-01

The production of isolated photons in deep-inelastic scattering ep→eγX is measured with the H1 detector at HERA. The measurement is performed in the kinematic range of negative four-momentum transfer squared 450 GeV. The analysis is based on a total integrated luminosity of 227 pb-1. The production cross section of isolated photons with a transverse energy in the range 3measured as a function of ET γ, ηγ and Q2. Isolated photon cross sections are also measured for events with no jets or at least one hadronic jet. The measurements are compared with predictions from Monte Carlo generators modelling the photon radiation from the quark and the electron lines, as well as with calculations at leading and next to leading order in the strong coupling. The predictions significantly underestimate the measured cross sections.

Measurement of Isolated Photon Production in Deep-Inelastic Scattering at HERA

CERN Document Server

Aaron, F.D.; Alexa, C.; Andreev, V.; Antunovic, B.; Aplin, S.; Asmone, A.; Astvatsatourov, A.; Backovic, S.; Baghdasaryan, A.; Baranov, P.; Barrelet, E.; Bartel, W.; Baudrand, S.; Beckingham, M.; Begzsuren, K.; Behnke, O.; Behrendt, O.; Belousov, A.; Berger, N.; Bizot, J.C.; Boenig, M.O.; Boudry, V.; Bozovic-Jelisavcic, I.; Bracinik, J.; Brandt, G.; Brinkmann, M.; Brisson, V.; Bruncko, D.; Busser, F.W.; Bunyatyan, A.; Buschhorn, G.; Bystritskaya, L.; Campbell, A.J.; Cantun Avila, K.B.; Cassol-Brunner, F.; Cerny, K.; Cerny, V.; Chekelian, V.; Cholewa, A.; Contreras, J.G.; Coughlan, J.A.; Cozzika, G.; Cvach, J.; Dainton, J.B.; Daum, K.; Deak, M.; de Boer, Y.; Delcourt, B.; Del Degan, M.; Delvax, J.; De Roeck, A.; De Wolf, E.A.; Diaconu, C.; Dodonov, V.; Dubak, A.; Eckerlin, G.; Efremenko, V.; Egli, S.; Eichler, R.; Eisele, F.; Eliseev, A.; Elsen, E.; Essenov, S.; Falkiewicz, A.; Faulkner, P.J.W.; Favart, L.; Fedotov, A.; Felst, R.; Feltesse, J.; Ferencei, J.; Finke, L.; Fleischer, M.; Fomenko, A.; Franke, G.; Frisson, T.; Gabathuler, E.; Gayler, J.; Ghazaryan, S.; Ginzburgskaya, S.; Glazov, A.; Glushkov, I.; Goerlich, L.; Goettlich, M.; Gogitidze, N.; Gorbounov, S.; Gouzevitch, M.; Grab, C.; Greenshaw, T.; Grell, B.R.; Grindhammer, G.; Habib, S.; Haidt, D.; Hansson, M.; Heinzelmann, G.; Helebrant, C.; Henderson, R.C.W.; Henschel, H.; Herrera, G.; Hildebrandt, M.; Hiller, K.H.; Hoffmann, D.; Horisberger, R.; Hovhannisyan, A.; Hreus, T.; Jacquet, M.; Janssen, M.E.; Janssen, X.; Jemanov, V.; Jonsson, L.; Johnson, D.P.; Jung, A.W.; Jung, H.; Kapichine, M.; Katzy, J.; Kenyon, I.R.; Kiesling, C.; Klein, M.; Kleinwort, C.; Klimkovich, T.; Kluge, T.; Knutsson, A.; Korbel, V.; Kostka, P.; Kraemer, M.; Krastev, K.; Kretzschmar, J.; Kropivnitskaya, A.; Kruger, K.; Landon, M.P.J.; Lange, W.; Lastovicka-Medin, G.; Laycock, P.; Lebedev, A.; Leibenguth, G.; Lendermann, V.; Levonian, S.; Li, G.; Lindfeld, L.; Lipka, K.; Liptaj, A.; List, B.; List, J.; Loktionova, N.; Lopez-Fernandez, R.; Lubimov, V.; Lucaci-Timoce, A.I.; Lytkin, L.; Makankine, A.; Malinovski, E.; Marage, P.; Marti, L.; Martisikova, M.; Martyn, H.U.; Maxfield, S.J.; Mehta, A.; Meier, K.; Meyer, A.B.; Meyer, H.; Meyer, H.; Meyer, J.; Michels, V.; Mikocki, S.; Milcewicz-Mika, I.; Mohamed, A.; Moreau, F.; Morozov, A.; Morris, J.V.; Mozer, M.U.; Muller, K.; Murin, P.; Nankov, K.; Naroska, B.; Naumann, T.; Newman, P.R.; Niebuhr, C.; Nikiforov, A.; Nowak, G.; Nowak, K.; Nozicka, M.; Oganezov, R.; Olivier, B.; Olsson, J.E.; Osman, S.; Ozerov, D.; Palichik, V.; Panagoulias, I.; Pandurovic, M.; Papadopoulou, T.; Pascaud, C.; Patel, G.D.; Peng, H.; Perez, E.; Perez-Astudillo, D.; Perieanu, A.; Petrukhin, A.; Picuric, I.; Piec, S.; Pitzl, D.; Placakyte, R.; Polifka, R.; Povh, B.; Preda, T.; Prideaux, P.; Radescu, V.; Rahmat, A.J.; Raicevic, N.; Ravdandorj, T.; Reimer, P.; Risler, C.; Rizvi, E.; Robmann, P.; Roland, B.; Roosen, R.; Rostovtsev, A.; Rurikova, Z.; Rusakov, S.; Salek, D.; Salvaire, F.; Sankey, D.P.C.; Sauter, M.; Sauvan, E.; Schmidt, S.; Schmitt, S.; Schmitz, C.; Schoeffel, L.; Schoning, A.; Schultz-Coulon, H.C.; Sefkow, F.; Shaw-West, R.N.; Sheviakov, I.; Shtarkov, L.N.; Sloan, T.; Smiljanic, I.; Smirnov, P.; Soloviev, Y.; South, D.; Spaskov, V.; Specka, A.; Staykova, Z.; Steder, M.; Stella, B.; Stiewe, J.; Straumann, U.; Sunar, D.; Sykora, T.; Tchoulakov, V.; Thompson, G.; Thompson, P.D.; Toll, T.; Tomasz, F.; Tran, T.H.; Traynor, D.; Trinh, T.N.; Truol, P.; Tsakov, I.; Tseepeldorj, B.; Tsipolitis, G.; Tsurin, I.; Turnau, J.; Tzamariudaki, E.; Urban, K.; Utkin, D.; Valkarova, A.; Vallee, C.; Van Mechelen, P.; Vargas Trevino, A.; Vazdik, Y.; Vinokurova, S.; Volchinski, V.; Weber, G.; Weber, R.; Wegener, D.; Werner, C.; Wessels, M.; Wissing, C.; Wolf, R.; Wunsch, E.; Xella, S.; Yeganov, V.; Zacek, J.; Zalesak, J.; Zhang, Z.; Zhelezov, A.; Zhokin, A.; Zhu, Y.C.; Zimmermann, T.; Zohrabyan, H.; Zomer, F.

2008-01-01

The production of isolated photons in deep-inelastic scattering $ep\\to e \\gamma X$ is measured with the H1 detector at HERA. The measurement is performed in the kinematic range of negative four-momentum transfer squared $450$ GeV. The analysis is based on a total integrated luminosity of 227~pb$^{-1}$. The production cross section of isolatedphotons with a transverse energy in the range $3 < E_T^\\gamma < 10$ GeV and pseudorapidity range $-1.2 < \\eta^\\gamma < 1.8$ is measured as a function of $E_T^\\gamma$, $\\eta^\\gamma$ and $Q^2$. Isolated photon cross sections are also measured for events with no jets or at least one hadronic jet. The measurements are compared with predictions from Monte Carlo generators modelling the photon radiation from the quark and the electron lines, as well as with calculations at leading and next to leading order in the strong coupling. The predictions significantly underestimate the measured cross sections.

Study of the Assessment Method for N Excretion in Sustainable Heavy Pigs Production

Science.gov (United States)

Guo, Kaijun; Liu, Fenghua; Xu, Xiaolong; Xu, Jianqin; Zoccarato, Ivo

Italian heavy pigs, with an average slaughtering body weight of 150-170 kg, are world-wide famous for its Parma ham production. Because the requirement of market diversity, producers are interested in ham production following the procedure of Italian pork industry. However, with ever growing public concern about nitrogen (N) pollution in the environment, it is necessary to determine a suitable method to measure N excretion from heavy pig production. The N retention was calculated by factorial method and compared with estimations of other methods available in literature. The results showed that the N percentage of heavy pigs is 2.43% ± 0.07% on body weight basis and the percentage of N excretion was approximately 69.62% ± 0.20 of N intake. Regarding the N excretion of estimation methods, the proposal of Xiccato et al. was closer to reality of the heavy pig production than other methods and could be used as a standard way to calculate the N excretion. Besides the overall standard, it is opportune to make a N balance sheet for every individual farm under specific conditions. Only in this way, the farmers can realize their deficiencies and will voluntarily follow the Good Management Practice (GMP) indications so as to guarantee a sustainable development of pig production.

Measurement of isolated photon production in deep inelastic ep scattering

International Nuclear Information System (INIS)

Chekanov, S.; Derrick, M.; Magill, S.

2009-09-01

Isolated photon production in deep inelastic ep scattering has been measured with the ZEUS detector at HERA using an integrated luminosity of 320 pb -1 . Measurements were made in the isolated-photon transverse-energy and pseudo- rapidity ranges 4 T γ γ 2 , in the range 10 2 2 and for invariant masses of the hadronic system W X >5 GeV. Differential cross sections are presented for inclusive isolated photon production as functions of Q 2 , x, E T γ and η γ . Leading-logarithm parton-shower Monte Carlo simulations and perturbative QCD predictions give a reasonable description of the data over most of the kinematic range. (orig.)

Measurement of associated charm production induced by 400 GeV/c protons

CERN Document Server

Akmete, A; Anokhina, A; Aoki, S; Atkin, E; Azorskiy, N; Back, JJ; Bagulya, A; Baranov, A; Barker, GJ; Battistin, M; Bauche, J; Bay, A; Bayliss, V; Bencivenni, G; Berdnikov, AY; Berdnikov, YA; Bertani, M; Betancourt, C; Bezshyiko, I; Bezshyyko, O; Bick, D; Bieschke, S; Blanco, A; Boehm, J; Bogomilov, M; Bondarenko, K; Bonivento, WM; Borburgh, J; Boyarsky, A; Brenner, R; Breton, D; Brundler, R; Bruschi, M; B\\"{u}scher, V; Buonaura, A; Buonocore, L; Buontempo, S; Cadeddu, S; Calcaterra, A; Calviani, M; Campanelli, M; Chau, P; Chauveau, J; Chepurnov, A; Chernyavskiy, M; Choi, K-Y; Chumakov, A; Ciambrone, P; Cornelis, K; Cristinziani, M; Dallavalle, GM; Datwyler, A; D'Ambrosio, N; D'Appollonio, G; De Carvalho Saraiva, J; De Lellis, G; De Roeck, A; De Serio, M; Dedenko, L; Dergachev, P; Di Crescenzo, A; Di Marco, N; Dib, C; Dijkstra, H; Dmitrenko, V; Dmitrievskiy, S; Domenici, D; Donskov, S; Dubreuil, A; Ebert, J; Ehlert, M; Enik, T; Etenko, A; Fabbri, F; Fabbri, L; Fabich, A; Fedin, O; Fedorova, G; Felici, G; Ferro-Luzzi, M; Fini, RA; Fonte, P; Franco, C; Fraser, M; Froeschl, R; Fukuda, T; Galati, G; Gavrilov, G; Gerlach, S; Goddard, B; Golinka-Bezshyyko, L; Golovatiuk, A; Golubkov, D; Golutvin, A; Gorbunov, D; Gorbunov, P; Gorbunov, S; Gorkavenko, V; Gornushkin, Y; Gorshenkov, M; Grachev, V; Graverini, E; Grenard, J-L; Grichine, V; Gruzinskii, N; Guler, A~M; Guz, Yu; Hagner, C; Hakobyan, H; van Herwijnen, E; Hollnagel, A; Hosseini, B; Hushchyn, M; Iaselli, G; Iuliano, A; Jacobsson, R; Jokovi\\'{c}, D; Jonker, M; Kadenko, I; Kamiscioglu, C; Kamiscioglu, M; Karaman, M; Khabibullin, M; Khaustov, G; Khotyantsev, A; Kim, SH; Kim, V; Kim, YG; Kitagawa, N; Ko, J-W; Kodama, K; Kolesnikov, A; Kolev, DI; Kolosov, V; Komatsu, M; Kono, A; Konovalova, N; Korkmaz, MA; Korol, I; Korol'ko, I; Korzenev, A; Kostyukhin, V; Kovalenko, S; Krasilnikova, I; Krivova, K; Kudenko, Y; Kurbatov, P; Kurochka, V; Kuznetsova, E; Lacker, HM; Lai, A; Lanfranchi, G; Lantwin, O; Lauria, A; Lebbolo, H; Lee, KS; Lee, KY; L\\'{e}vy, J-M; Likhacheva, V; Lopes, L; Lyubovitsky, V; Maalmi, J; Magnan, A; Maleev, V; Malinin, A; Manabe, Y; Manfredi, M; Mefodev, A; Mermod, P; Mikado, S; Mikhaylov, Yu; Milstead, DA; Mineev, O; Montanari, A; Montesi, MC; Morishima, K; Movchan, S; Naganawa, N; Nakamura, M; Nakano, T; Nishio, A; Novikov, A; Obinyakov, B; Ogawa, S; Okateva, N; Osborne, J; Ovchynnikov, M; Owtscharenko, N; Owen, PH; Pacholek, P; Paoloni, A; Park, BD; Park, SK; Paparella, R; Pastore, A; Patel, M; Pereyma, D; Perillo-Marcone, A; Petrenko, D; Petridis, K; Podgrudkov, D; Poliakov, V; Polukhina, N; Prokudin, M; Prota, A; Rademakers, A; Rakai, A; Ratnikov, F; Rawlings, T; Razeti, M; Redi, F; Ricciardi, S; Rinaldesi, M; Rodin, Volodymyr; Rodin, Viktor; Roganova, T; Rogozhnikov, A; Rokujo, H; Rosa, G; Rovelli, T; Ruchayskiy, O; Ruf, T; Samoylenko, V; Ull, A~Sanz; Saputi, A; Sato, O; Savchenko, ES; Schliwinski, J; Schmidt-Parzefall, W; Serra, N; Sgobba, S; Shadura, O; Shakin, A; Shaposhnikov, M; Shatalov, P; Shchedrina, T; Shchutska, L; Shevchenko, V; Shibuya, H; Shustov, A; Silverstein, SB; Simone, S; Simoniello, R; Skorokhvatov, M; Smirnov, S; Sohn, JY; Sokolenko, A; Solodko, E; Solovev, V; Starkov, N; Storaci, B; Strolin, P; Sukhonos, D; Suzuki, Y; Takahashi, S; Timiryasov, I; Tioukov, V; Tommasini, D; Torii, M; Tosi, N; Tramontano, F; Treille, D; Tsenov, R; Ulin, S; Ustyuzhanin, A; Uteshev, Z; Vankova-Kirilova, G; Vannucci, F; Venkova, P; Venturi, V; Vilchinski, S; Villa, M; Vincke, Heinz; Vincke, Helmuth; Vlasik, K; Volkov, A; Voronkov, R; Wanke, R; Woo, J-K; Wurm, M; Xella, S; Yilmaz, D; Yilmazer, AU; Yoon, CS; Zaytsev, Yu

2017-01-01

An important input for the interpretation of the measurements of the SHiP ex- periment is a good knowledge of the differential charm production cross section, including cascade production. This is a proposal to measure the associated charm production cross section, employing the SPS 400 GeV/c proton beam and a replica of the first two interaction lengths of the SHiP target. The detection of the produc- tion and decay of charmed hadron in the target will be performed through nuclear emulsion films, employed in an Emulsion Cloud Chamber target structure. In order to measure charge and momentum of decay daughters, we intend to build a mag- netic spectrometer using silicon pixel, scintillating fibre and drift tube detectors. A muon tagger will be built using RPCs. An optimization run is scheduled in 2018, while the full measurement will be performed after the second LHC Long Shutdown.

7 CFR 929.49 - Marketable quantity, allotment percentage, and annual allotment.

Science.gov (United States)

2010-01-01

... AGRICULTURE CRANBERRIES GROWN IN STATES OF MASSACHUSETTS, RHODE ISLAND, CONNECTICUT, NEW JERSEY, WISCONSIN, MICHIGAN, MINNESOTA, OREGON, WASHINGTON, AND LONG ISLAND IN THE STATE OF NEW YORK Order Regulating Handling... history, established pursuant to § 929.48. Such allotment percentage shall be established by the Secretary...

13 CFR 108.1840 - Computation of NMVC Company's Capital Impairment Percentage.

Science.gov (United States)

2010-01-01

... Capital Impairment Percentage. 108.1840 Section 108.1840 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW MARKETS VENTURE CAPITAL (âNMVCâ) PROGRAM NMVC Company's Noncompliance With Terms of Leverage Computation of Nmvc Company's Capital Impairment § 108.1840 Computation of NMVC Company's Capital Impairment...

Top quark production cross-section measurements with the ATLAS detector at EPS-HEP 2017

CERN Document Server

Pollard, Christopher Samuel; The ATLAS collaboration

2017-01-01

Measurements of the inclusive and differential top-quark pair and single-top production cross sections in proton-proton collisions with the ATLAS detector at the Large Hadron Collider at center-of-mass energies of 8 TeV and 13 TeV are presented. The inclusive measurements reach high precision and are compared to the best available theoretical calculations. Differential measurements of the kinematic properties of the top-quark production are also discussed. These measurements, including results using boosted tops, probe our understanding of top-quark pair production in the TeV regime.

Measurement of photon (also +jets) production cross sections, jets production cross sections and extraction of the strong coupling constant

CERN Document Server

Villaplana Perez, Miguel; The ATLAS collaboration

2017-01-01

The production of prompt isolated photons at hadron colliders provides a stringent test of perturbative QCD and can be used to probe the proton structure. The ATLAS collaboration has performed precise measurements of the inclusive production of isolated prompt photons at a centre-of-mass energy of 13 TeV, differential in both rapidity and the photon transverse momentum. In addition, the integrated and differential cross sections for isolated photon pairs and tri-photon production 8 TeV have been measured. The results are compared with state-of-the-art theory predictions at NLO in QCD and with predictions of several MC generators. The production of prompt photons in association with jets provides an additional testing ground for perturbative QCD (pQCD) with a hard colourless probe less affected by hadronisation effects than jet production. The ATLAS collaboration has studied the dynamics of isolated-photon production in association with gluon, light and heavy quark final states in pp collisions at a centre-of-...

Aggregate Multi-Factor Productivity: Measurement Issues in OECD Countries

OpenAIRE

Egert, Balazs

2018-01-01

This paper analyses for 34 OECD countries the extent to which the calculation of aggregate multi-factor productivity (MFP) is sensitive to alternative parameterisations. The starting point is the definition of MFP used in previous work in the OECD’s Economics Department (e.g. Johansson et al. 2013). They include alternative MFP measures, with human capital included or excluded, with different measures of Purchasing Power Parity (PPP) exchange rates, using time-varying capital depreciation rat...

Light scattering measurement of sodium polyacrylate products

Science.gov (United States)

Lama, Nisha; Norwood, David; Boone, Steven; Massie-Boyer, Valerie

2015-03-01

In the presentation, we will describe the use of a multi-detector HPLC incorporating the DAWN EOS multi-angle laser light scattering (MALLS) detector to measure the properties such as molecular weight, RMS radius, contour and persistence length and polydispersity of sodium polyacrylate products. The samples of sodium polyacrylate are used in various industries as thickening agents, coating dispersants, artificial snow, laundry detergent and disposable diapers. Data and results obtained from the experiment will be presented.

Integral measurement of fission products capture in fast breeder reactors

International Nuclear Information System (INIS)

Martin Deidier, Loick.

1979-12-01

For the SUPERPHENIX reactor project, it was necessary to know fission products capture with about 10% accuracy in the fast breeder reactor spectra. In this purpose, integral measurements have been carried out on the main separated products by different experimental technics (oscillation, activation and irradiation methods), but particularly on irradiated fuel pins from RAPSODIE and PHENIX reactors in order to directly obtain total effect of fission products. Same tendencies have been observed for both enriched uranium fuel and LMFBR characteristic plutonium fuel. All experimental results have been introduced in CARNAVAL cross section set [fr

Measurement of D*± meson production in deep-inelastic scattering at HERA

International Nuclear Information System (INIS)

Bachynska, Olena

2012-12-01

Measurements of charm production in deep-inelastic scattering at HERA at a centre-of-mass energy of 318 GeV are reported in this thesis. The analysis was performed using the data collected with the ZEUS detector during the years 2004 to 2007, corresponding to an integrated luminosity of 363 pb -1 . The production of charm quarks was studied through the full kinematic reconstruction of D* ± mesons in the decay channel D* ± → D 0 / anti D 0 π ± . The studies have been performed for virtualities of the exchanged photon of 5 2 2 and inelasticities of 0.02 ± kinematic phase space is defined by the transverse momentum range, 1.5 T D* ± D* ± vertical stroke ± mesons. The total visible cross section for D* ± production as well as single-and double-differential cross sections were measured and compared to the corresponding D* ± measurements performed by the H1 collaboration in the same phase-space region. The measurements are well described by NLO QCD predictions. The double-differential cross sections were exploited to extract the charm contribution to the proton structure function, F 2 c anti c , expressed in terms of the reduced charm-production cross sections, σ red c anti c , and compared to the predictions from HERAPDF1.5 and to the recent measurements from the H1 and ZEUS collaborations.

Increased percentage of Th17 cells in peritoneal fluid is associated with severity of endometriosis.

Science.gov (United States)

Gogacz, Marek; Winkler, Izabela; Bojarska-Junak, Agnieszka; Tabarkiewicz, Jacek; Semczuk, Andrzej; Rechberger, Tomasz; Adamiak, Aneta

2016-09-01

Th17 cells are a newly discovered T helper lymphocyte subpopulation, producing interleukin IL-17. Th17 cells are present in blood and peritoneal fluid (PF) at different stages of endometriosis. We aim to establish their potential importance in the pathogenesis and clinical features of the disease. The percentage of Th17 cells among T helper lymphocytes was determined in the PF and peripheral blood (PB) of patients with endometriosis and in the control group by flow cytometry using monoclonal antibodies: anti-CD-4-FITC, anti-CD-3-PE/Cy5, and anti-IL-17A-PE. Th17 percentage is increased in PF in comparison with PB in both endometriotic patients and in the control group. In severe endometriosis, the percentage of Th17 cells in PF was higher than with early (I/II stage) endometriosis. A positive correlation between the percentage of Th17 cells in PF and the white blood cell count in PB was found in patients with endometriosis. Targeting the activity of PF Th17 cells may have an influence on the proliferation of ectopic tissue and clinical manifestations of the disease. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

New approaches to the measurement of chlorophyll, related pigments and productivity in the sea

Science.gov (United States)

Booth, C. R.; Keifer, D. A.

1989-01-01

In the 1984 SBIR Call for Proposals, NASA solicited new methods to measure primary production and chlorophyll in the ocean. Biospherical Instruments Inc. responded to this call with a proposal first to study a variety of approaches to this problem. A second phase of research was then funded to pursue instrumentation to measure the sunlight stimulated naturally occurring fluorescence of chlorophyll in marine phytoplankton. The monitoring of global productivity, global fisheries resources, application of above surface-to-underwater optical communications systems, submarine detection applications, correlation, and calibration of remote sensing systems are but some of the reasons for developing inexpensive sensors to measure chlorophyll and productivity. Normally, productivity measurements are manpower and cost intensive and, with the exception of a very few expensive multiship research experiments, provide no contemporaneous data. We feel that the patented, simple sensors that we have designed will provide a cost effective method for large scale, synoptic, optical measurements in the ocean. This document is the final project report for a NASA sponsored SBIR Phase 2 effort to develop new methods for the measurements of primary production in the ocean. This project has been successfully completed, a U.S. patent was issued covering the methodology and sensors, and the first production run of instrumentation developed under this contract has sold out and been delivered.

Effects of Aloe vera on dressing percentage and haemato-biochemidal parameters of broiler chickens

Directory of Open Access Journals (Sweden)

Jagmohan Singh

2013-09-01

Full Text Available Aim: To evaluate the effects of Aloe vera on dressing percentage and hemato-biochemical parameters of broiler chickens.Materials and Methods: A total of 90 chicks were used in this study. They were randomly allocated into 3 treatment groups.Fresh Aloe vera leaf juice (ALJ was prepared and administered to the test group T3 at the rate of 20 g/Lin drinking water daily.This study was carried out for 42 days. Dressing percentage and hemato-biochemical parameters were recorded at the end ofexperiment.Results: Group that was given Aloe vera (T3 showed numerically higher dressing percentage as compared to control group(T1 and drug control group (T2. It also showed significantly (P0.05 differences were observed in other parameters among all the treatment groups.Conclusion: Aloe vera has potential to be a growth promoter in broiler chicks and its growth promoting effects are comparableto that of antibiotic growth promoter (AGP.

Quarkonia production in small and large systems measured by ATLAS

CERN Document Server

Lopez, Jorge; The ATLAS collaboration

2018-01-01

The experimentally observed dissociation and regeneration of bound quarkonium states in heavy-ion collisions provide a powerful tool to probe the dynamics of the hot, dense plasma. These measurements are sensitive to the effects of color screening, color recombination, or other, new suppression mechanisms. In the large-statistics Run 2 lead-lead and proton-lead collision data, these phenomena can be probed with unprecedented precision. Measurements of the ground and excited quarkonia states, as well as their separation into prompt and non-prompt components, provide further opportunities to study the dynamics of heavy parton energy loss in these large systems. In addition, quarkonium production rates, and their excited to ground states ratios, in small, asymmetric systems are an interesting probe of cold nuclear matter effects. In this talk, the latest ATLAS results on quarkonia production will be presented, including new, differential measurements of charmonium suppression and azimuthal modulation in lead-lea...

Measurement of isolated photon production in deep-inelastic scattering at HERA

International Nuclear Information System (INIS)

Aaron, F.D.; Alexa, C.

2007-10-01

The production of isolated photons in deep-inelastic scattering ep → eγX is measured with the H1 detector at HERA. The measurement is performed in the kinematic range of negative four-momentum transfer squared 4 2 2 and a mass of the hadronic system W X >50 GeV. The analysis is based on a total integrated luminosity of 227 pb -1 . The production cross section of isolated photons with a transverse energy in the range 3 γ T γ γ T , η γ and Q 2 . Isolated photon cross sections are also measured for events with no jets or at least one hadronic jet. The measurements are compared with predictions from Monte Carlo generators modelling the photon radiation from the quark and the electron lines, as well as with calculations at leading and next to leading order in the strong coupling. The predictions significantly underestimate the measured cross sections. (orig.)

Technical note: Consistent calculation of aquatic gross production from oxygen triple isotope measurements

Directory of Open Access Journals (Sweden)

J. Kaiser

2011-07-01

Full Text Available Oxygen triple isotope measurements can be used to calculate aquatic gross oxygen production rates. Past studies have emphasised the appropriate definition of the ¹⁷O excess and often used an approximation to derive production rates from the ¹⁷O excess. Here, I show that the calculation can be phrased more consistently and without any approximations using the relative ¹⁷O/¹⁶O and ¹⁸O/¹⁶O isotope ratio differences (delta values directly. I call this the "dual delta method". The ¹⁷O excess is merely a mathematical construct and the derived production rate is independent of its definition, provided all calculations are performed with a consistent definition. I focus on the mixed layer, but also show how time series of triple isotope measurements below the mixed layer can be used to derive gross production.

In the calculation of mixed layer productivity, I explicitly include isotopic fractionation during gas invasion and evasion, which requires the oxygen supersaturation s to be measured as well. I also suggest how bubble injection could be considered in the same mathematical framework. I distinguish between concentration steady state and isotopic steady state and show that only the latter needs to be assumed in the calculation. It is even possible to derive an estimate of the net production rate in the mixed layer that is independent of the assumption of concentration steady state.

I review measurements of the parameters required for the calculation of gross production rates and show how their systematic uncertainties as well as the use of different published calculation methods can cause large variations in the production rates for the same underlying isotope ratios. In particular, the ¹⁷O excess of dissolved O₂ in equilibrium with atmospheric O₂ and the ¹⁷O excess of photosynthetic O₂ need to

Malmquist Index, an Alternative Technique for Measuring Credit Institutions Productivity

Directory of Open Access Journals (Sweden)

Nicolae Dardac

2008-03-01

Full Text Available The present study tackles the banking system’s productivity in a more complex manner, that integrates multiple input, multiple output variables, abdicating from the reductionist perspective of clasical methods, which imposed limits in the number of variables, in the process of productivity measurement and interpretation. The advantage of Malmquist productivity indexes consists both in a quantitative evaluation of the global productivity of a credit institution over a specified period of time, and in the decomposition of productivity, in order to underline how much of its change is due to the catch-up effect, and, respectively, to the implementation of new technologies. The results obtained revealed that credit institutions placed on the first three places in the banking system, according to assets value, maintained constant their productivity level during the analysed period, meanwhile the other institutions in our sample registered a slowly improvement in productivity, determined, mainly, by technological changes.

QCD aspects of diboson production based on measurements of the ATLAS detector

CERN Document Server

Dutta, Baishali; The ATLAS collaboration

2017-01-01

The production of diboson states with jets in the final state received significant attention since next-to-next-to leading order calculations became available. In this talk, we present measurements of WZ and ZZ dibosons final states, with a special focus on their production in association with jets. Several differential distributions have been measured for the first time and are compared to the state-of-the art theory predictions.

Production competence revisited:a critique of the literature and a new measurement approach

OpenAIRE

Szász, Levente; Demeter, Krisztina; Boer, Harry

2015-01-01

Purpose – The purpose of this paper is to seek remedy to two major flaws of the production competence literature, which concern: the way the production competence construct is operationalized and the way its effects on performance are measured.Design/methodology/approach – The paper proposes to measure production competence as the two-dimensional operational level construct it actually is, and to use Slack’s (1994) importance performance matrix to study its business level performance effects....

Valorization of lignite combustion residues and ferroalumina in the production of aggregates.

Science.gov (United States)

Anagnostopoulos, I M; Stivanakis, V E; Angelopoulos, G N; Papamantellos, D C

2010-02-15

The present research study investigates the synergy of industrial solid by-products from lignite combustion (fly ash and bottom ash) and aluminum production (ferroalumina) in the production of lightweight aggregates (LWA). The process consists of two stages, pelletization and sintering. Bottom ash (BA) is used as the principal raw material in mixtures while ferroalumina (FAL) is added in lower percentages (5-30 wt%). BA carbon content is used as the fuel of sintering process in high temperatures, around 1250 degrees C, and gas generation is responsible for porous structure formation. Physical properties such as porosity, water absorption and bulk density, of sintering products are measured. Increase of FAL percentage in sintering mixtures results in decrease of porosity from 61% to 35% and of water absorption from 61% to 21% and in increase of bulk density from 1.02 g/cm(3) to 1.80 g/cm(3) of the produced aggregates. Aggregates produced by FAL addition up to 20 wt% are characterized as LWA. Aggregates formed are used in the production of concrete specimens. Compressive strength of concrete increases by increasing FAL addition in aggregates from 5 wt% to 15 wt% (highest strength value), while decrease by increasing FAL addition from 20 wt% to 30 wt%. FAL addition in lignite ashes sintering mixtures (up to 15 wt%) is considered as an important parameter for enhancing aggregates strength.

Consumer oriented new product development

DEFF Research Database (Denmark)

van Trijp, Hans C.M.; Grunert, Klaus G

2014-01-01

New product development is a necessary activity for a company’s competitiveness, profitability and growth. However, new product development is a risky activity as a large percentage of new product introductions fail to achieve their commercial targets. The present chapter reviews the existing evi...... evidence on new product success and failure factors. From that it introduces the perspective of consumer-oriented new product development as a way to balance new technological opportunity against identified consumer needs and desires....

The dependence of percentage depth dose on the source-to-skin ...

African Journals Online (AJOL)

The variation of percentage depth dose (PDD) with source-to-skin distance (SSD) for kilovoltage X-rays used in radiotherapy has been investigated. Based on physical parameters of photon fluence, absorption and scatter during interaction of radiation with tissue, a mathematical model was developed to predict the PDDs at ...

Effect of PANI rate percentage on morphology, structure and charge transport mechanism in PANI–PVDF composites above percolation threshold

International Nuclear Information System (INIS)

Saïdi, Sami; Bouzitoun, Mouna; Mannaî, Aymen; Gmati, Fethi; Derouiche, Hassen; Mohamed, Abdellatif Belhadj

2013-01-01

Polyaniline–Poly(vinylidene) fluoride (PANI–PVDF) composites were prepared by adding PANI to the PVDF by different weight percentages p % (p = 0, 5, 10, 20, … until 100%). The dc and ac electrical conductivity were studied as a function of PANI percentage in the temperature range 303–453 K. The percolation threshold was found to be equal to 2.95%. When the amount of PANI varies from 5 to 30%, the charge transport mechanism was found to be governed by Mott's three-dimensional variable range hopping model and the dc conductivity decreases within this range. For p > 30%, the conductivity increases and the charge transport mechanism are better fitted by a fluctuation induced tunnelling model (FIT). By calculating the distance ‘s’ between two successive clusters (the distance between two active imines centres (=N + H–) of PANI) from the FIT model, we deduce that electron charge transfer is done by inter-chain hopping for the range [p = 40 to 60%] and by intra-chain hopping for p = 70 to 90%. Some insights about the contribution of the ionic charge transport for PANI concentrations in the interval 5% < p < 30% were obtained using impedance measurements at different frequencies. X-ray diffraction measurements, Fourier transform infrared spectroscopy and scanning electron microscopy were used to investigate the effect of PANI on the structure and morphology of composites. (paper)

Optical measurements of atomic oxygen concentration, temperature and nitric oxide production rate in flames

Science.gov (United States)

Myhr, Franklin Henry

An optical method for measuring nitric oxide (NO) production rates in flames was developed and characterized in a series of steady, one-dimensional, atmospheric-pressure laminar flames of 0.700 Hsb2/0.199 Nsb2/0.101 COsb2 or 0.700 CHsb4/0.300 Nsb2 (by moles) with dry air, with equivalence ratios from 0.79 to 1.27. Oxygen atom concentration, (O), was measured by two-photon laser-induced fluorescence (LIF), temperature was measured by ultraviolet Rayleigh scattering, and nitrogen concentration was calculated from supplied reactant flows; together this information was used to calculate the NO production rate through the thermal (Zel'dovich) mechanism. Measurements by two other techniques were compared with results from the above method. In the first comparison, gas sampling was used to measure axial NO concentration profiles, the slopes of which were multiplied by velocity to obtain total NO production rates. In the second comparison, LIF measurements of hydroxyl radical (OH) were used with equilibrium water concentrations and a partial equilibrium assumption to find (O). Nitric oxide production rates from all three methods agreed reasonably well. Photolytic interference was observed during (O) LIF measurements in all of the flames; this is the major difficulty in applying the optical technique. Photolysis of molecular oxygen in lean flames has been well documented before, but the degree of interference observed in the rich flames suggests that some other molecule is also dissociating; the candidates are OH, CO, COsb2 and Hsb2O. An extrapolative technique for removing the effects of photolysis from (O) LIF measurements worked well in all flames where NO production was significant. Using the optical method to measure NO production rates in turbulent flames will involve a tradeoff among spatial resolution, systematic photolysis error, and random shot noise. With the conventional laser system used in this work, a single pulse with a resolution of 700 mum measured NO

Measurement of $\\Delta^{++}$(1232) production in hadronic Z decays

CERN Document Server

Abreu, P; Adye, T; Agasi, E; Ajinenko, I; Aleksan, Roy; Alekseev, G D; Allport, P P; Almehed, S; Alvsvaag, S J; Amaldi, Ugo; Amato, S; Andreazza, A; Andrieux, M L; Antilogus, P; Anykeyev, V B; Apel, W D; Arnoud, Y; Åsman, B; Augustin, J E; Augustinus, A; Baillon, Paul; Bambade, P; Barão, F; Barate, R; Bardin, Dimitri Yuri; Barker, G J; Baroncelli, A; Bärring, O; Barrio, J A; Bartl, Walter; Bates, M J; Battaglia, Marco; Baubillier, M; Baudot, J; Becks, K H; Begalli, M; Beillière, P; Belokopytov, Yu A; Benvenuti, Alberto C; Berggren, M; Bertrand, D; Bianchi, F; Bigi, M; Bilenky, S M; Billoir, P; Bloch, D; Blume, M; Blyth, S; Bocci, V; Bolognese, T; Bonesini, M; Bonivento, W; Booth, P S L; Borisov, G; Bosio, C; Bosworth, S; Botner, O; Bouquet, B; Bourdarios, C; Bowcock, T J V; Bozzo, M; Branchini, P; Brand, K D; Brenke, T; Brenner, R A; Bricman, C; Brillault, L; Brown, R C A; Brückman, P; Brunet, J M; Bugge, L; Buran, T; Burgsmüller, T; Buschmann, P; Buys, A; Caccia, M; Calvi, M; Camacho-Rozas, A J; Camporesi, T; Canale, V; Canepa, M; Cankocak, K; Cao, F; Carena, F; Carrilho, P; Carroll, L; Caso, Carlo; Castillo-Gimenez, M V; Cattai, A; Cavallo, F R; Cerrito, L; Chabaud, V; Charpentier, P; Chaussard, L; Chauveau, J; Checchia, P; Chelkov, G A; Chierici, R; Chliapnikov, P V; Chochula, P; Chorowicz, V; Cindro, V; Collins, P; Contreras, J L; Contri, R; Cortina, E; Cosme, G; Cossutti, F; Crawley, H B; Crennell, D J; Crosetti, G; Cuevas-Maestro, J; Czellar, S; Dahl-Jensen, Erik; Dahm, J; D'Almagne, B; Dam, M; Damgaard, G; Daum, A; Dauncey, P D; Davenport, Martyn; Da Silva, W; Defoix, C; Della Ricca, G; Delpierre, P A; Demaria, N; De Angelis, A; De Boeck, H; de Boer, Wim; De Brabandere, S; De Clercq, C; La Vaissière, C de; De Lotto, B; De Min, A; De Paula, L S; De Saint-Jean, C; Dijkstra, H; Di Ciaccio, Lucia; Djama, F; Dolbeau, J; Dönszelmann, M; Doroba, K; Dracos, M; Drees, J; Drees, K A; Dris, M; Dufour, Y; Dupont, F; Edsall, D M; Ehret, R; Eigen, G; Ekelöf, T J C; Ekspong, Gösta; Elsing, M; Engel, J P; Ershaidat, N; Erzen, B; Espirito-Santo, M C; Falk, E; Fassouliotis, D; Feindt, Michael; Ferrer, A; Filippas-Tassos, A; Firestone, A; Fischer, P A; Föth, H; Fokitis, E; Fontanelli, F; Formenti, F; Franek, B J; Frenkiel, P; Fries, D E C; Frodesen, A G; Frühwirth, R; Fulda-Quenzer, F; Fuster, J A; Galloni, A; Gamba, D; Gandelman, M; García, C; García, J; Gaspar, C; Gasparini, U; Gavillet, P; Gazis, E N; Gelé, D; Gerber, J P; Gibbs, M; Gokieli, R; Golob, B; Gopal, Gian P; Gorn, L; Górski, M; Guz, Yu; Gracco, Valerio; Graziani, E; Grosdidier, G; Gunnarsson, P; Günther, M; Guy, J; Haedinger, U; Hahn, F; Hahn, M; Hahn, S; Hajduk, Z; Hallgren, A; Hamacher, K; Hao, W; Harris, F J; Hedberg, V; Henriques, R P; Hernández, J J; Herquet, P; Herr, H; Hessing, T L; Higón, E; Hilke, Hans Jürgen; Hill, T S; Holmgren, S O; Holt, P J; Holthuizen, D J; Houlden, M A; Hrubec, Josef; Huet, K; Hultqvist, K; Ioannou, P; Jackson, J N; Jacobsson, R; Jalocha, P; Janik, R; Jarlskog, G; Jarry, P; Jean-Marie, B; Johansson, E K; Jönsson, L B; Jönsson, P E; Joram, Christian; Juillot, P; Kaiser, M; Kapusta, F; Karlsson, M; Karvelas, E; Katsanevas, S; Katsoufis, E C; Keränen, R; Khomenko, B A; Khovanskii, N N; King, B J; Kjaer, N J; Klein, H; Klovning, A; Kluit, P M; Köhne, J H; Köne, B; Kokkinias, P; Koratzinos, M; Kostyukhin, V; Kourkoumelis, C; Kuznetsov, O; Kramer, P H; Krammer, Manfred; Kreuter, C; Królikowski, J; Kronkvist, I J; Krumshtein, Z; Krupinski, W; Kubinec, P; Kucewicz, W; Kurvinen, K L; Lacasta, C; Laktineh, I; Lamblot, S; Lamsa, J; Lanceri, L; Lane, D W; Langefeld, P; Lapin, V; Last, I; Laugier, J P; Lauhakangas, R; Leder, Gerhard; Ledroit, F; Lefébure, V; Legan, C K; Leitner, R; Lemoigne, Y; Lemonne, J; Lenzen, Georg; Lepeltier, V; Lesiak, T; Liko, D; Lindner, R; Lipniacka, A; Lippi, I; Lörstad, B; Lokajícek, M; Loken, J G; López, J M; López-Fernandez, A; López-Aguera, M A; Loukas, D; Lutz, P; Lyons, L; Maehlum, G; Maio, A; Malychev, V; Mandl, F; Marco, J; Maréchal, B; Margoni, M; Marin, J C; Mariotti, C; Markou, A; Maron, T; Martínez-Rivero, C; Martínez-Vidal, F; Martí i García, S; Matorras, F; Matteuzzi, C; Matthiae, Giorgio; Mazzucato, M; McCubbin, M L; McKay, R; McNulty, R; Medbo, J; Meroni, C; Meyer, W T; Michelotto, M; Migliore, E; Mirabito, L; Mitaroff, Winfried A; Mjörnmark, U; Moa, T; Møller, R; Mönig, K; Monge, M R; Morettini, P; Müller, H; Mundim, L M; Murray, W J; Muryn, B; Myatt, Gerald; Naraghi, F; Navarria, Francesco Luigi; Navas, S; Negri, P; Némécek, S; Neumann, W; Neumeister, N; Nicolaidou, R; Nielsen, B S; Nieuwenhuizen, M; Nikolaenko, V; Niss, P; Nomerotski, A; Normand, Ainsley; Oberschulte-Beckmann, W; Obraztsov, V F; Olshevskii, A G; Onofre, A; Orava, Risto; Österberg, K; Ouraou, A; Paganini, P; Paganoni, M; Pagès, P; Palka, H; Papadopoulou, T D; Pape, L; Parkes, C; Parodi, F; Passeri, A; Pegoraro, M; Pernegger, H; Pernicka, Manfred; Perrotta, A; Petridou, C; Petrolini, A; Phillips, H T; Piana, G; Pierre, F; Pimenta, M; Pindo, M; Plaszczynski, S; Podobrin, O; Pol, M E; Polok, G; Poropat, P; Pozdnyakov, V; Prest, M; Privitera, P; Pukhaeva, N; Pullia, Antonio; Radojicic, D; Ragazzi, S; Rahmani, H; Rames, J; Ratoff, P N; Read, A L; Reale, M; Rebecchi, P; Redaelli, N G; Regler, Meinhard; Reid, D; Renton, P B; Resvanis, L K; Richard, F; Richardson, J; Rídky, J; Rinaudo, G; Ripp, I; Romero, A; Roncagliolo, I; Ronchese, P; Roos, L; Rosenberg, E I; Rosso, E; Roudeau, Patrick; Rovelli, T; Rückstuhl, W; Ruhlmann-Kleider, V; Ruiz, A; Rybicki, K; Rybin, A; Saarikko, H; Sacquin, Yu; Sadovskii, A; Sajot, G; Salt, J; Sánchez, J; Sannino, M; Schneider, H; Schyns, M A E; Sciolla, G; Scuri, F; Seager, P; Sedykh, Yu; Segar, A M; Seitz, A; Sekulin, R L; Shellard, R C; Siccama, I; Siegrist, P; Simonetti, S; Simonetto, F; Sissakian, A N; Sitár, B; Skaali, T B; Smadja, G; Smirnova, O G; Smith, G R; Sosnowski, R; Souza-Santos, D; Spassoff, Tz; Spiriti, E; Sponholz, P; Squarcia, S; Stanescu, C; Stapnes, Steinar; Stavitski, I; Stepaniak, K; Stichelbaut, F; Stocchi, A; Strauss, J; Strub, R; Stugu, B; Szczekowski, M; Szeptycka, M; Tabarelli de Fatis, T; Tavernet, J P; Chikilev, O G; Tilquin, A; Timmermans, J; Tkatchev, L G; Todorov, T; Toet, D Z; Tomaradze, A G; Tomé, B; Tortora, L; Tranströmer, G; Treille, D; Trischuk, W; Tristram, G; Trombini, A; Troncon, C; Tsirou, A L; Turluer, M L; Tyapkin, I A; Tyndel, M; Tzamarias, S; Überschär, B; Ullaland, O; Uvarov, V; Valenti, G; Vallazza, E; Van der Velde, C; van Apeldoorn, G W; van Dam, P; Van Doninck, W K; Van Eldik, J; Vassilopoulos, N; Vegni, G; Ventura, L; Venus, W A; Verbeure, F; Verlato, M; Vertogradov, L S; Vilanova, D; Vincent, P; Vitale, L; Vlasov, E; Vodopyanov, A S; Vrba, V; Wahlen, H; Walck, C; Waldner, F; Weierstall, M; Weilhammer, Peter; Wetherell, Alan M; Wicke, D; Wickens, J H; Wielers, M; Wilkinson, G R; Williams, W S C; Winter, M; Witek, M; Woschnagg, K; Yip, K; Yushchenko, O P; Zach, F; Zacharatou-Jarlskog, C; Zaitsev, A; Zalewska-Bak, A; Zalewski, Piotr; Zavrtanik, D; Zevgolatakos, E; Zhigunov, V P; Zimin, N I; Zito, M; Zontar, D; Zuberi, R; Zucchelli, G C; Zumerle, G

1995-01-01

A measurement of the \\Delta^{++}(1232) inclusive production in hadronic decays of the Z at LEP is presented, based on 1.3 million hadronic events collected~ by the DELPHI~ detector in the 1994 LEP running~ period. The DELPHI ring imaging Cherenkov counters are used for identifying hadrons. The average \\Delta^{++}(1232) multiplicity per hadronic event is 0.079 \\pm 0.015 which is more than a factor of two below the JETSET, HERWIG and UCLA model predictions. It agrees with a recently proposed universal mass dependence of particle production rates in e^{+}e^- annihilations.

Measurement of open beauty production at HERA in the D{sup *}{mu} final state

Energy Technology Data Exchange (ETDEWEB)

Chekanov, S.; Derrick, M.; Magill, S. [Argonne National Laboratory, IL (US)] (and others)

2006-09-15

The production of beauty quarks with a D{sup *{+-}} and a muon in the final state has been measured with the ZEUS detector at HERA using an integrated luminosity of 114 pb{sup -1}. Low transverse-momentum thresholds for the muon and D{sup *} meson allow a measurement of beauty production closer to the production threshold than previous measurements. The beauty signal was extracted using the charge correlations and angular distributions of the muon with respect to the D{sup *} meson. Cross sections for photoproduction and deep inelastic scattering are somewhat higher than, but compatible with, next-to-leading-order QCD predictions, and compatible with other measurements. (orig.)

Thermal hydraulic aspects of uncertainty in power measurement of nuclear reactors

International Nuclear Information System (INIS)

Gupta, S.K.; Kumar, Rajesh; Gaikwad, A.J.; Majumdar, P.; Agrawal, R.A.

2004-01-01

Power measurement in Nuclear Reactors is carried out through in-core and ex-core neutron monitors which are continuously calibrated against thermal power. In Indian Pressurized Heavy Water Reactors (220 MWe) the temperature difference across steam generator hot and cold legs is taken to be a measure of thermal power as the flow through the primary heat transport system is assumed to be constant through out is operation. Gross flow is not measured directly. However, the flow depends on the characteristics of the primary heat transport pumps, which are centrifugal type and are affected by the grid frequency. The paper quantifies the percentage increase in the reactor power for the sustained allowable frequency. The paper quantifies the percentage increase in the reactor power for the sustained allowable high grid frequency. This uncertainty is in addition to instrument inaccuracy and should be accounted for in safety analysis. In some reactors thermal power is calculated from stem flow rate and pressure, here the location of steam flow measurement is important to avoid leakage related error in thermal power. Neutron absorption cross section in the power measurement instruments and the power production in the fuel varies with neutron energy levels, these aspects are also discussed in the paper. (author)

Measurement of Electroweak Top Quark Production at {D\\O}

Energy Technology Data Exchange (ETDEWEB)

Tsai, Yun-Tse [Univ. of Rochester, NY (United States)

2013-01-01

We present a new model-independent measurement of the electroweak single top-quark production cross section in proton-antiproton (p- $\\bar{p}$) collisions at √s = 1.96 TeV in 9.7 fb^-1 of integrated luminosity collected with the DØ detector.

Influence of Expectation Measure on the Sensory Acceptance of Petit Suisse Product.

Science.gov (United States)

Teixeira Lopes, Maria Micheline; Passos Rodrigues, Maria do Carmo; Souza de Araújo, Ana Maria

2018-03-01

The consumer's expectation has an important role in the consumption of food products. It is one of the factors that influence the perception of sensory attributes and interact with the physiological, behavioral and cognitive factors influencing consumer decisions. The present study aimed to analyze the influence of consumer's expectations on the acceptance of Petit Suisse. Products of 4 different brands were used for the sensory analysis, 2 international brands and 2 regional ones. The 9-point regular hedonic scale was employed to carry out affective sensory and expectation measure tests (with and without product information). Concerning the present research, photos of the packaging of each product were printed in color and presented to the participants. These photos displayed the following pieces of information: the product brand, pictures, colors, product name, nutritional information and date of manufacture. International samples obtained higher grades when presented with their packaging, and obtained lower values both in the blind test and in the real expectation test evaluation. It can be concluded that the sensory analysis of the expectation measure showed that the brand influences the acceptance of the product, for the consumer's expectations for international brands had positively confirmed and disconfirmed acceptance. This study generated a significant contribution, especially for companies that aim for a wider market. The application of sensory analysis with a focus on expectation measure, it shows that the brand determines the purchase, based on the results of this study. Therefore, the product's visual identity must be invested in; it must arouse children and adults' attention. That is, it reinforces that the image of the product, the label and what it arouses in the consumers are extremely important for the final choice. © 2018 Institute of Food Technologists®.

New CMS measurements of Higgs boson production and decay properties

CERN Multimedia

CERN. Geneva

2018-01-01

Combined measurements of the Higgs boson production and decay rates, as well its couplings to vector bosons and fermions, are presented. The analyses are based on the LHC proton-proton collision dataset recorded by the CMS detector at 13 TeV. The combination is based on the analysis of all the production processes gluon fusion, vector boson fusion and production with a W or a Z boson or a pair of top quarks, and of the H→ZZ, WW, γγ, ττ, bb, and μμ decay modes. Dedicated searches for invisible Higgs boson decays are also considered.

Surveillance indicators for potential reduced exposure products (PREPs: developing survey items to measure awareness

Directory of Open Access Journals (Sweden)

McNeill Ann

2009-10-01

Full Text Available Abstract Background Over the past decade, tobacco companies have introduced cigarettes and smokeless tobacco products (known as Potential Reduced Exposure Products, PREPs with purportedly lower levels of some toxins than conventional cigarettes and smokeless products. It is essential that public health agencies monitor awareness, interest, use, and perceptions of these products so that their impact on population health can be detected at the earliest stages. Methods This paper reviews and critiques existing strategies for measuring awareness of PREPs from 16 published and unpublished studies. From these measures, we developed new surveillance items and subjected them to two rounds of cognitive testing, a common and accepted method for evaluating questionnaire wording. Results Our review suggests that high levels of awareness of PREPs reported in some studies are likely to be inaccurate. Two likely sources of inaccuracy in awareness measures were identified: 1 the tendency of respondents to misclassify "no additive" and "natural" cigarettes as PREPs and 2 the tendency of respondents to mistakenly report awareness as a result of confusion between PREPs brands and similarly named familiar products, for example, Eclipse chewing gum and Accord automobiles. Conclusion After evaluating new measures with cognitive interviews, we conclude that as of winter 2006, awareness of reduced exposure products among U.S. smokers was likely to be between 1% and 8%, with the higher estimates for some products occurring in test markets. Recommended measurement strategies for future surveys are presented.

Surveillance indicators for potential reduced exposure products (PREPs): developing survey items to measure awareness

Science.gov (United States)

Bogen, Karen; Biener, Lois; Garrett, Catherine A; Allen, Jane; Cummings, K Michael; Hartman, Anne; Marcus, Stephen; McNeill, Ann; O'Connor, Richard J; Parascandola, Mark; Pederson, Linda

2009-01-01

Background Over the past decade, tobacco companies have introduced cigarettes and smokeless tobacco products (known as Potential Reduced Exposure Products, PREPs) with purportedly lower levels of some toxins than conventional cigarettes and smokeless products. It is essential that public health agencies monitor awareness, interest, use, and perceptions of these products so that their impact on population health can be detected at the earliest stages. Methods This paper reviews and critiques existing strategies for measuring awareness of PREPs from 16 published and unpublished studies. From these measures, we developed new surveillance items and subjected them to two rounds of cognitive testing, a common and accepted method for evaluating questionnaire wording. Results Our review suggests that high levels of awareness of PREPs reported in some studies are likely to be inaccurate. Two likely sources of inaccuracy in awareness measures were identified: 1) the tendency of respondents to misclassify "no additive" and "natural" cigarettes as PREPs and 2) the tendency of respondents to mistakenly report awareness as a result of confusion between PREPs brands and similarly named familiar products, for example, Eclipse chewing gum and Accord automobiles. Conclusion After evaluating new measures with cognitive interviews, we conclude that as of winter 2006, awareness of reduced exposure products among U.S. smokers was likely to be between 1% and 8%, with the higher estimates for some products occurring in test markets. Recommended measurement strategies for future surveys are presented. PMID:19840394

Infants with Down syndrome: percentage and age for acquisition of gross motor skills.

Science.gov (United States)

Pereira, Karina; Basso, Renata Pedrolongo; Lindquist, Ana Raquel Rodrigues; da Silva, Louise Gracelli Pereira; Tudella, Eloisa

2013-03-01

The literature is bereft of information about the age at which infants with Down syndrome (DS) acquire motor skills and the percentage of infants that do so by the age of 12 months. Therefore, it is necessary to identify the difference in age, in relation to typical infants, at which motor skills were acquired and the percentage of infants with DS that acquire them in the first year of life. Infants with DS (N=20) and typical infants (N=25), both aged between 3 and 12 months, were evaluated monthly using the AIMS. In the prone position, a difference of up to 3 months was found for the acquisition of the 3rd to 16th skill. There was a difference in the percentage of infants with DS who acquired the 10th to 21st skill (from 71% to 7%). In the supine position, a difference of up to one month was found from the 3rd to 7th skill; however, 100% were able to perform these skills. In the sitting position, a difference of 1-4 months was found from the 1st to 12th skill, ranging from 69% to 29% from the 9th to 12th. In the upright position, the difference was 2-3 months from the 3rd to 8th skill. Only 13% acquired the 8th skill and no other skill was acquired up to the age of 12 months. The more complex the skills the greater the difference in age between typical infants and those with DS and the lower the percentage of DS individuals who performed the skills in the prone, sitting and upright positions. None of the DS infants were able to stand without support. Copyright © 2012 Elsevier Ltd. All rights reserved.

Identifying Usability and Productivity Dimensions for Measuring the Success of Mobile Business Services

Directory of Open Access Journals (Sweden)

Maiju Vuolle

2008-01-01

Full Text Available This paper reviews existing measures used for evaluating the usability of information systems and those used for evaluating the level of the productivity of a company. We discuss the usefulness of the existing measures in the mobile business context, where both mobility and work-context pose specific demands for the mobile business services. The review showed that the existing measures rarely consider the great contextual variation caused by the mobility of the services and the demands this poses on usability; which, in turn, affects productivity. To build a measurement tool that better meets the requirements of mobile business services, we completed case studies on two mobile business services, one used in passenger transport and the other in construction sites. Based on the understanding gained from the case studies, we propose a list of dimensions and items addressing both usability and productivity aspects that work as the basis for a multidisciplinary measurement tool.

A New Approach to Measuring the Gap between Marginal Productivity and Wages of Workers

OpenAIRE

KODAMA Naomi; ODAKI Kazuhiko

2012-01-01

The idea that the productivity and wages of workers are not necessarily equal has long attracted the attention of many economists. Indeed, the lack of a method to measure the productivity-wage gap has hindered the development of research on labor economics, productivity analysis, and human capital study. This paper proposes a new empirical method to measure the gap between the value of a worker's marginal product (VMP) and wage. We first define this gap. The method then aggregates the Mincer-...

Supplementing five-point body condition score with body fat percentage increases the sensitivity for assessing overweight status of small to medium sized dogs

Directory of Open Access Journals (Sweden)

Arai T

2012-09-01

Full Text Available Gebin Li,1 Peter Lee,1 Nobuko Mori,1 Ichiro Yamamoto,1 Koh Kawasumi,1 Hisao Tanabe,2 Toshiro Arai11Department of Veterinary Science, School of Veterinary Medicine, Nippon Veterinary and Life Science University, 2Komazawa Animal Hospital, Tokyo, JapanBackground and methods: Currently, five-point body condition scoring (BCS is widely used by veterinarians and clinicians to assess adiposity in dogs in Japan. However, BCS score assignment is subjective in nature, and most clinicians do not score with half points, instead preferring to round off values, thereby rendering less accurate assessments. Therefore, we sought to determine whether assessing body fat percentage using simple morphometric measurements and supplementing this with five-point BCS can have increased sensitivity for detecting increasing adiposity in overweight small-medium sized dog breeds via plasma metabolite validation.Results: Overall, lean body fat percentage was determined to be 15%–22% for male (non-neutered/neutered dogs and 15%–25% for female (nonspayed/spayed. Dogs categorized as overweight by BCS had significantly higher levels of nonesterified fatty acids (P = 0.005, whereas animals categorized as overweight by BCS + body fat percentage were observed to have significantly higher levels of nonesterified fatty acids (P = 0.006, total cholesterol (P = 0.029, and triglycerides (P = 0.001 than lean animals. The increased sensitivity due to body fat percentage for gauging alterations in plasma metabolite levels may be due to increased correlation strength. Body fat percentage correlated positively with plasma insulin (r = 0.627, P = 0.002, nonesterified fatty acids (r = 0.674, P < 0.001, total cholesterol (r = 0.825, P < 0.0001, triglycerides (r = 0.5823, P < 0.005, blood urea nitrogen (r = 0.429, P < 0.05, creatinine (r = 0.490, P = 0.021, and total protein (r = 0.737, P< 0.0001 levels, which all tend to increase as a result of increasing adiposity

Measurement of the particle production properties in ATLAS

CERN Document Server

Bruni, Alessia; The ATLAS collaboration

2017-01-01

Measurements of the particle production properties with the ATLAS detector A correct modelling of the underlying event in proton-proton collisions is important for the proper simulation of kinematic distributions of high-energy collisions. The ATLAS collaboration extended previous studies at 7 TeV with a leading track or jet or Z boson by a new study at 13 TeV, measuring the number and transverse-momentum sum of charged particles as a function of pseudorapidity and azimuthal angle in dependence of the reconstructed leading track. These measurements are sensitive to the underlying-event as well as the onset of hard emissions. The results are compared to predictions of several MC generators. A similar comparison between measurements and MC generator predictions will be shown for the strange meson content in topquark pair events. Studies of particle correlations in high-energy collisions can provide valuable insights into the detailed understanding of the space-time geometry of the hadronization region. The ATLA...

Analysis of soybean production and import trends and its import factors in Indonesia

Science.gov (United States)

Ningrum, I. H.; Irianto, H.; Riptanti, E. W.

2018-03-01

This study aims to analyze the factors affecting soybean imports in Indonesia and to know the trend and projection of Indonesian soybean production as well as the import in 2016-2020. The basic method used in this research is the description analysis method. The data used are secondary data in the form of time series data from 1979-2015. Methods of data analysis using simultaneous equations model with 2SLS (Two Stage Least Square) method and Trend analysis. The results showed that the factors affecting soybean imports in Indonesia are consumption and production. Consumption has positive effect while production is negatively affected. The percentage changed in soybean imports is greater than the percentage change in consumption and production of soybeans. Consumption is positively influenced by imports and production, while production is influenced positively by consumption and negative by imports. The production trend of soybean in 2016-2020 has a tendency to increase with a percentage of 11.18% per year. Production in 2016 is projected at 1.110.537 tons while in 2020 it will increase to 1,721,350 tons. The import trend in 2016-2020 has a tendency to increase with an average percentage of 4.13% per year. Import in 2016 is projected at 2.224.188 tons while in 2020 it will increase to 2.611.270 tons.

Waist-to-height ratio, waist circumference and BMI as indicators of percentage fat mass and cardiometabolic risk factors in children aged 3-7 years

NARCIS (Netherlands)

Sijtsma, Anna; Bocca, Gianni; L'abée, Carianne; Liem, Eryn T; Sauer, Pieter J J; Corpeleijn, Eva

Objective: To assess whether waist-to-height-ratio (WHtR) is a better estimate of body fat percentage (BF %) and a better indicator of cardiometabolic risk factors than BMI or waist circumference (WC) in young children. Methods: WHtR, WC and BMI were measured by trained staff according to

Unilateral Measures addressing Non-Trade Concerns. A Study on WTO Consistency, Relevance of other International Agreements, Economic Effectiveness and Impact on Developing Countries of Measures concerning Non-Product-Related Processes and Production Methods

International Nuclear Information System (INIS)

Van den Bossche, P.; Schrijver, N.; Faber, G.

2007-01-01

Over the last two years, the debate in the Netherlands on trade measures addressing non-trade concerns has focused on two important and politically sensitive issues, namely: (1) the sustainability of the large-scale production of biomass as an alternative source of energy; and (2) the production of livestock products in a manner that is consistent with animal welfare requirements. In February 2007 a report was issued on the 'Toetsingskader voor Duurzame Biomassa', the so-called Cramer Report. This report discusses the risks associated with large-scale biomass production and establishes a list of criteria for the sustainable production of biomass. These criteria reflect a broad range of non-trade concerns, including environmental protection, global warming, food security, biodiversity, economic prosperity and social welfare. The report recognizes that the implementation of the criteria (including the establishment of a certification system) will require careful consideration of the obligations of the Netherlands under EU and WTO law. Governments called upon to address non-trade concerns may do so by using different types of measures. Prominent among these are measures concerning processes and production methods of products. In the present study, these issues are examined primarily with regard to existing, proposed or still purely hypothetical measures for implementing the Cramer criteria for the sustainable production of biomass. Several other, non-energy-related issues are discussed in this report

Estimated percentage of typhoid fever in adult pakistani population (TAP) study

International Nuclear Information System (INIS)

Mehboob, F.; Arshad, A.; Firdous, S.; Ahmed, S.; Rehma, S.

2013-01-01

Typhoid fever is a serious infection with high morbidity and mortality in untreated cases. It is one of the very common infections in developing countries due to various factors involving hygiene and sanitation. Objective: To determine the estimated percentage of typhoid fever in Pakistani population and to find the commonly prescribed antibiotics for the disease. Material and Methods: This cross sectional study was conducted on 1036 patients, selected from forty five general practitioner clinics, between June to October 2010. Patients of > 18 years of age with > 3 days history of fever (> 100 degree F) and high index of suspicion for typhoid fever were tested for typhoid fever using Typhidot kits and positive cases were recruited for monitoring response to treatment. The febrile patients with clear cut history of urinary or respiratory infect-ion, hypovolemic shock or hepatobiliary disease were excluded and not tested by typhidot kit. The antibiotics prescribed to study population by various general practitioners were noted. Data was analysed on SPSS. Results were expressed in percentages and proportions. Results: Total 1036 patients were recruited. Typhoidot test was negative in 63.9% and positive in 36.1% patients with highest percentages of positive cases in Karachi, Rawalpindi and Hyderabad. The maximum number of cases were reported in summer season especially from June to August. Most of the patients were between ages of 19 - 39 years. The commonest anti-biotics prescribed were Ofloxacin, Ciprofloxacin and Levofloxacin. Conclusion: Typhoid fever is very common infection in Pakistan caused by Salmonella typhi which is transmitted among humans through faecooral route. Disease can be controlled not only by antibiotics like fluoroquinolones but by patient education, improvement in hygiene and sanitation, safe supply of clean drinking water and prophylactic vaccination as well. However, timely diagnosis and appropriate management with proper antibiotics is the key

Estimated percentage of typhoid fever in adult pakistani population (TAP) study

Energy Technology Data Exchange (ETDEWEB)

Mehboob, F.; Arshad, A.; Firdous, S.; Ahmed, S.; Rehma, S. [Mayo Hospital, Lahore (Pakistan). Dept. of Medicine

2013-01-15

Typhoid fever is a serious infection with high morbidity and mortality in untreated cases. It is one of the very common infections in developing countries due to various factors involving hygiene and sanitation. Objective: To determine the estimated percentage of typhoid fever in Pakistani population and to find the commonly prescribed antibiotics for the disease. Material and Methods: This cross sectional study was conducted on 1036 patients, selected from forty five general practitioner clinics, between June to October 2010. Patients of > 18 years of age with > 3 days history of fever (> 100 degree F) and high index of suspicion for typhoid fever were tested for typhoid fever using Typhidot kits and positive cases were recruited for monitoring response to treatment. The febrile patients with clear cut history of urinary or respiratory infect-ion, hypovolemic shock or hepatobiliary disease were excluded and not tested by typhidot kit. The antibiotics prescribed to study population by various general practitioners were noted. Data was analysed on SPSS. Results were expressed in percentages and proportions. Results: Total 1036 patients were recruited. Typhoidot test was negative in 63.9% and positive in 36.1% patients with highest percentages of positive cases in Karachi, Rawalpindi and Hyderabad. The maximum number of cases were reported in summer season especially from June to August. Most of the patients were between ages of 19 - 39 years. The commonest anti-biotics prescribed were Ofloxacin, Ciprofloxacin and Levofloxacin. Conclusion: Typhoid fever is very common infection in Pakistan caused by Salmonella typhi which is transmitted among humans through faecooral route. Disease can be controlled not only by antibiotics like fluoroquinolones but by patient education, improvement in hygiene and sanitation, safe supply of clean drinking water and prophylactic vaccination as well. However, timely diagnosis and appropriate management with proper antibiotics is the key

Primary production measurements at three reservoirs in the state of Sao Paulo, Brazil

International Nuclear Information System (INIS)

Jureidini, P.; Chinez, S.J.; Agudo, E.G.

1983-01-01

Primary production measurements were carried out at three reservoirs in the state of Sao Paulo, Barra Bonita, Paiva Castro and Ponte nova using the 14 C technique. Meanwhile, several physical and chemical parameters of these water were also evaluated, in order to find out the limnological conditions of these reservoirs. Primary production rates ranged from 7,6mg C/m 3 d at Ponte Nova, to 247,2mg C/m 3 d at Barra Bonita. There seems to be god correlation between water quality data and primary production measurements. Regarding the results, it may be stated that the Barra Bonita reservoir has reached the eutrophic level, while the other two exibit mesotrophic levels. As a way of testing the water quality data collected was used in Churchill and Nicholas model, issuing results in agreement with those of the primary production measurements. (Author) [pt

Measurement cross sections for radioisotopes production

International Nuclear Information System (INIS)

Garrido, E.

2011-01-01

New radioactive isotopes for nuclear medicine can be produced using particle accelerators. This is one goal of Arronax, a high energy - 70 MeV - high intensity - 2*350 μA - cyclotron set up in Nantes. A priority list was established containing β - - 47 Sc, 67 Cu - β + - 44 Sc, 64 Cu, 82 Sr/ 82 Rb, 68 Ge/ 68 Ga - and α emitters - 211 At. Among these radioisotopes, the Scandium 47 and the Copper 67 have a strong interest in targeted therapy. The optimization of their productions required a good knowledge of their cross-sections but also of all the contaminants created during irradiation. We launched on Arronax a program to measure these production cross-sections using the Stacked-Foils' technique. It consists in irradiating several groups of foils - target, monitor and degrader foils - and in measuring the produced isotopes by γ-spectrometry. The monitor - nat Cu or nat Ni - is used to correct beam loss whereas degrader foils are used to lower beam energy. We chose to study the nat Ti(p,X) 47 Sc and 68 Zn(p,2p) 67 Cu reactions. Targets are respectively natural Titanium foil - bought from Goodfellow - and enriched Zinc 68 deposited on Silver. In the latter case, Zn targets were prepared in-house - electroplating of 68 Zn - and a chemical separation between Copper and Gallium isotopes has to be made before γ counting. Cross-section values for more than 40 different reactions cross-sections have been obtained from 18 MeV to 68 MeV. A comparison with the Talys code is systematically done. Several parameters of theoretical models have been studied and we found that is not possible to reproduce faithfully all the cross-sections with a given set of parameters. (author)

Measurement of Charged Current Coherent Pion Production by Neutrinos on Carbon at MINER$\

Energy Technology Data Exchange (ETDEWEB)

Mislivec, Aaron Robert [Univ. of Rochester, NY (United States)

2017-01-01

Neutrino-nucleus coherent pion production is a rare neutrino scattering process where the squared four-momentum transferred to the nucleus is small, a lepton and pion are produced in the forward direction, and the nucleus remains in its initial state. This process is an important background in neutrino oscillation experiments. Measurements of coherent pion production are needed to constrain models which are used to predict coherent pion production in oscillation experiments. This thesis reports measurements of νµ and νµ charged current coherent pion production on carbon for neutrino energies in the range 2 < Eν < 20 GeV. The measurements were made using data from MINERνA, which is a dedicated neutrino-nucleus scattering experiment that uses a fi scintillator tracking detector in the high-intensity NuMI neutrino beam at Fermilab. Coherent interactions were isolated from the data using only model-independent signatures of the reaction, which are a forward muon and pion, no evidence of nuclear breakup, and small four-momentum transfer to the nucleus. The measurements were compared to the coherent pion production model used by oscillation experiments. The data and model agree in the total interaction rate and are similar in the dependence of the interaction rate on the squared four- momentum transferred from the neutrino. The data and model disagree significantly in the pion kinematics. The measured νµ and νµ interaction rates are consistent, which supports model predictions that the neutrino and antineutrino interaction rates are equal.

Measuring the Productivity of Energy Consumption of Major Industries in China: A DEA-Based Method

Directory of Open Access Journals (Sweden)

Xishuang Han

2014-01-01

Full Text Available Data envelopment analysis can be applied to measure the productivity of multiple input and output decision-making units. In addition, the data envelopment analysis-based Malmquist productivity index can be used as a tool for measuring the productivity change during different time periods. In this paper, we use an input-oriented model to measure the energy consumption productivity change from 1999 to 2008 of fourteen industry sectors in China as decision-making units. The results show that there are only four sectors that experienced effective energy consumption throughout the whole reference period. It also shows that these sectors always lie on the efficiency frontier of energy consumption as benchmarks. The other ten sectors experienced inefficiency in some two-year time periods and the productivity changes were not steady. The data envelopment analysis-based Malmquist productivity index provides a good way to measure the energy consumption and can give China's policy makers the information to promote their strategy of sustainable development.

Measurement of K0S, Λ and anti Λ production at HERA

International Nuclear Information System (INIS)

Chekanov, S.; Derrick, M.; Magill, S.

2006-12-01

The production of the neutral strange hadrons K 0 S , Λ and anti Λ has been measured in ep collisions at HERA using the ZEUS detector. Cross sections, baryon-to-meson ratios, relative yields of strange and charged light hadrons, Λ (anti Λ) asymmetry and polarization have been measured in three kinematic regions: Q 2 >25 GeV 2 ; 5 2 2 ; and in photoproduction (Q 2 ≅0), in which the presence of two hadronic jets, each with at least 5 GeV transverse energy, was required. The measurements agree in general with Monte Carlo models and are consistent with measurements made at e + e - colliders, except for an enhancement of baryon relative to meson production in photoproduction. (orig.)

Productivity measurement in the presence of externalities: An example from the electric power industry

Science.gov (United States)

Chaston, Kelly Ann

Traditional productivity measures have ensured that environmental regulations were seen as deterrents to productivity growth. Such measures are constructed in a manner which make this conclusion inevitable. Traditional productivity measures include the regulation-induced additions to inputs, whether qualitatively or quantitatively, while continuing to ignore the value of the pollution emitted. The measure proposed in this thesis is derived formally from a model of social welfare. With the exception of 'prices' for emitted pollutants, for which marginal damage estimates will proxy, the proposed measure relies upon market prices, which are then incorporated into a conventional Divisia framework. Data from the electricity generation industry are used to construct both the conventional and newly proposed TFP growth rates. The industry provides an ideal framework within which this growth measure can be tested. It is a large industry that affects a majority of society as it is both consumed as a final good and pervasively used as an intermediate good. The industry is also a large polluter. On an annual basis it has been responsible for approximately one-third of the emissions of carbon-dioxide, one-third of the emissions of nitrous oxides, and two-thirds of the sulfur dioxides emissions, nationally. Furthermore, performance of the proposed measure across various samples was allowed by the diversity of utilities in the industry both with respect to location and fuel mix. Incorporating the value of externalities results in a productivity growth measure which is substantially improved. The difference in calculated productivity gains between the two measures is shown to be sizable under a number of circumstances. As well, the empirical analysis offers some general lessons as to the treatment of various pollutants--it is clearly demonstrated that movement in one pollutant cannot be used to proxy movements in others, or be used as an indicator as to the bias of traditional TFP

External perforated Solar Screens for daylighting in residential desert buildings: Identification of minimum perforation percentages

KAUST Repository

Sherif, Ahmed

2012-06-01

The desert climate is endowed by clear sky conditions, providing an excellent opportunity for optimum utilization of natural light in daylighting building indoor spaces. However, the sunny conditions of the desert skies, in countries like Egypt and Saudi Arabia, result in the admittance of direct solar radiation, which leads to thermal discomfort and the incidence of undesired glare. One type of shading systems that is used to permit daylight while controlling solar penetration is " Solar Screens" Very little research work addressed different design aspects of external Solar Screens and their influence on daylighting performance, especially in desert conditions, although these screens proved their effectiveness in controlling solar radiation in traditional buildings throughout history.This paper reports on the outcomes of an investigation that studied the influence of perforation percentage of Solar Screens on daylighting performance in a typical residential living room of a building in a desert location. The objective was to identify minimum perforation percentage of screen openings that provides adequate illuminance levels in design-specific cases and all-year-round.Research work was divided into three stages. Stage one focused on the analysis of daylighting illuminance levels in specific dates and times, while the second stage was built on the results of the first stage, and addressed year round performance using Dynamic Daylight Performance Metrics (DDPMs). The third stage addressed the possibility of incidence of glare in specific cases where illuminance levels where found very high in some specific points during the analysis of first stage. The research examined the daylighting performance in an indoor space with a number of assumed fixed experimentation parameters that were chosen to represent the principal features of a typical residential living room located in a desert environment setting.Stage one experiments demonstrated that the screens fulfilled the

The effect of insulin resistance and exercise on the percentage of CD16(+) monocyte subset in obese individuals.

Science.gov (United States)

de Matos, Mariana A; Duarte, Tamiris C; Ottone, Vinícius de O; Sampaio, Pâmela F da M; Costa, Karine B; de Oliveira, Marcos F Andrade; Moseley, Pope L; Schneider, Suzanne M; Coimbra, Cândido C; Brito-Melo, Gustavo E A; Magalhães, Flávio de C; Amorim, Fabiano T; Rocha-Vieira, Etel

2016-06-01

Obesity is a low-grade chronic inflammation condition, and macrophages, and possibly monocytes, are involved in the pathological outcomes of obesity. Physical exercise is a low-cost strategy to prevent and treat obesity, probably because of its anti-inflammatory action. We evaluated the percentage of CD16(-) and CD16(+) monocyte subsets in obese insulin-resistant individuals and the effect of an exercise bout on the percentage of these cells. Twenty-seven volunteers were divided into three experimental groups: lean insulin sensitive, obese insulin sensitive and obese insulin resistant. Venous blood samples collected before and 1 h after an aerobic exercise session on a cycle ergometer were used for determination of monocyte subsets by flow cytometry. Insulin-resistant obese individuals have a higher percentage of CD16(+) monocytes (14.8 ± 2.4%) than the lean group (10.0 ± 1.3%). A positive correlation of the percentage of CD16(+) monocytes with body mass index and fasting plasma insulin levels was found. One bout of moderate exercise reduced the percentage of CD16(+) monocytes by 10% in all the groups evaluated. Also, the absolute monocyte count, as well as all other leukocyte populations, in lean and obese individuals, increased after exercise. This fact may partially account for the observed reduction in the percentage of CD16(+) cells in response to exercise. Insulin-resistant, but not insulin-sensitive obese individuals, have an increased percentage of CD16(+) monocytes that can be slightly modulated by a single bout of moderate aerobic exercise. These findings may be clinically relevant to the population studied, considering the involvement of CD16(+) monocytes in the pathophysiology of obesity. Copyright © 2016 John Wiley & Sons, Ltd. Obesity is now considered to be an inflammatory condition associated with many pathological consequences, including insulin resistance. It is proposed that insulin resistance contributes to the aggravation of the

Simulating local measurements on a quantum many-body system with stochastic matrix product states

DEFF Research Database (Denmark)

Gammelmark, Søren; Mølmer, Klaus

2010-01-01

We demonstrate how to simulate both discrete and continuous stochastic evolutions of a quantum many-body system subject to measurements using matrix product states. A particular, but generally applicable, measurement model is analyzed and a simple representation in terms of matrix product operators...... is found. The technique is exemplified by numerical simulations of the antiferromagnetic Heisenberg spin-chain model subject to various instances of the measurement model. In particular, we focus on local measurements with small support and nonlocal measurements, which induce long-range correlations....

Measurement of charm and beauty production in deep inelastic scattering at HERA

International Nuclear Information System (INIS)

Roloff, Philipp

2011-12-01

In this thesis two measurements of heavy quark production in deep inelastic scattering at HERA are presented. Cross sections for the production of heavy quarks can be calculated in quantum chromodynamics (QCD). The heavy quark masses represent hard scales, which allow to apply perturbative methods. Charm production has been measured with the ZEUS detector using an integrated luminosity of 120 pb -1 . The hadronic decay channels D + → K 0 S π + , Λ + c → pK 0 S and Λ + c → Λπ + were reconstructed. The presence of a neutral strange hadron in the final state reduces the combinatorial background and extends the measured sensitivity into the region p T (D + , Λ + c ) T 2 (D + ), η(D + ), Q 2 and x for the production of D + mesons are in reasonable agreement with predictions from perturbative QCD. The fraction of c quarks hadronising into Λ + c baryons was extracted from a combination of both investigated Λ + c decay channels. The result is consistent with a previous measurement in the photoproduction regime and with the average e + e - value. The production of charm and beauty quarks has been measured with the ZEUS detector using the data collected between 2004 and 2007. This data sample corresponds to an integrated luminosity of 354 pb -1 . The charm and beauty contents in events with a jet were determined using the decay-length significance and invariant mass of the reconstructed secondary decay vertices. Differential cross sections in E jet T , η jet , Q 2 and x are in reasonable agreement with predictions for perturbative QCD. The open charm and beauty contributions to the inclusive proton structure function F 2 were extracted from double differential cross sections in x and Q 2 . The obtained F c anti c 2 and F b anti b 2 values are in good agreement with previous measurements and theoretical predictions. This measurement represents the most precise determination of F b anti b 2 at the HERA collider in a large part of the accessible phase space

Studies on the Effect of Type and Solarization Period on Germination Percentage of Four Weed Species

Directory of Open Access Journals (Sweden)

J. Rostam

2011-01-01

Full Text Available Abstract In order to study the effects of soil solarization on weed control, an experiment with factorial arrangement in a randomized complete block design with four replications was conducted in a fallow farm in Daregaz in 2008. Factors included solarization duration (0, 2, 4 and 6 weeks and soil moisture content (dry and moist. Soil seed bank was sampled (in two depth, 0-10 and 10-20 cm prior to the experiment and immediately after applying treatments, and germination percentage of weed species were determined. Results of this study showed that seed germination percentage in 10 cm soil depth was influenced by soil moisture and solarization and their interactions, while in 20 cm soil depth only solarization period affected the weed seed germination. Germination percentage in moist soil was less than that in dry soil. Seed germination percentage declined more by increasing solarization duration, so that the greatest decline was obtained after 6 weeks solarization. Solarization decreased germination percentage in moist soil more than that in dry soil. Overall, the results of this experiment indicated that solarization of moist soil for 6 weeks was the most effective treatment in controlling common lambsquatres (Chenopodium album, common purslane (Portulaca oleracea, redroot pigweed (Amaranthus retroflexus, and wild mustard (Sinapis arvensis, while solarization of dry soil for 2 weeks was the least effective treatment for weed control. Keywords: Solarization, Soil moisture, Seed bank

The quantification of free Amadori compounds and amino acids allows to model the bound Maillard reaction products formation in soybean products.

Science.gov (United States)

Troise, Antonio Dario; Wiltafsky, Markus; Fogliano, Vincenzo; Vitaglione, Paola

2018-05-01

The quantification of protein bound Maillard reaction products (MRPs) is still a challenge in food chemistry. Protein hydrolysis is the bottleneck step: it is time consuming and the protein degradation is not always complete. In this study, the quantitation of free amino acids and Amadori products (APs) was compared to the percentage of blocked lysine by using chemometric tools. Eighty thermally treated soybean samples were analyzed by mass spectrometry to measure the concentration of free amino acids, free APs and the protein-bound markers of the Maillard reaction (furosine, Nε-(carboxymethyl)-l-lysine, Nε-(carboxyethyl)-l-lysine, total lysine). Results demonstrated that Discriminant Analysis (DA) and Correlated Component Regression (CCR) correctly estimated the percent of blocked lysine in a validation and prediction set. These findings indicate that the measure of free markers reflects the extent of protein damage in soybean samples and it suggests the possibility to obtain rapid information on the quality of the industrial processes. Copyright © 2017 Elsevier Ltd. All rights reserved.

Jet angularity measurements for single inclusive jet production

Science.gov (United States)

Kang, Zhong-Bo; Lee, Kyle; Ringer, Felix

2018-04-01

We study jet angularity measurements for single-inclusive jet production at the LHC. Jet angularities depend on a continuous parameter a allowing for a smooth interpolation between different traditional jet shape observables. We establish a factorization theorem within Soft Collinear Effective Theory (SCET) where we consistently take into account in- and out-of-jet radiation by making use of semi-inclusive jet functions. For comparison, we elaborate on the differences to jet angularities measured on an exclusive jet sample. All the necessary ingredients for the resummation at next-to-leading logarithmic (NLL) accuracy are presented within the effective field theory framework. We expect semiinclusive jet angularity measurements to be feasible at the LHC and we present theoretical predictions for the relevant kinematic range. In addition, we investigate the potential impact of jet angularities for quark-gluon discrimination.

Serum amyloid A and haptoglobin concentrations and liver fat percentage in lactating dairy cows with abomasal displacement.

Science.gov (United States)

Guzelbektes, H; Sen, I; Ok, M; Constable, P D; Boydak, M; Coskun, A

2010-01-01

There has been increased interest in measuring the serum concentration of acute phase reactants such as serum amyloid A [SAA] and haptoglobin [haptoglobin] in periparturient cattle in order to provide a method for detecting the presence of inflammation or bacterial infection. To determine whether [SAA] and [haptoglobin] are increased in cows with displaced abomasum as compared with healthy dairy cows. Fifty-four adult dairy cows in early lactation that had left displaced abomasum (LDA, n = 34), right displaced abomasum or abomasal volvulus (RDA/AV, n = 11), or were healthy on physical examination (control, n = 9). Inflammatory diseases or bacterial infections such as mastitis, metritis, or pneumonia were not clinically apparent in any animal. Jugular venous blood was obtained from all cows and analyzed. Liver samples were obtained by biopsy in cattle with abomasal displacement. [SAA] and [haptoglobin] concentrations were increased in cows with LDA or RDA/AV as compared with healthy controls. Cows with displaced abomasum had mild to moderate hepatic lipidosis, based on liver fat percentages of 9.3 +/- 5.3% (mean +/- SD, LDA) and 10.8 +/- 7.7% (RDA/AV). [SAA] and [haptoglobin] were most strongly associated with liver fat percentage, r(s) = +0.55 (P hepatic lipidosis in cattle with abomasal displacement.

A neutron detector for measurement of total neutron production cross sections

International Nuclear Information System (INIS)

Sekharan, K.K.; Laumer, H.; Kern, B.D.; Gabbard, F.

1976-01-01

A neutron detector has been constructed and calibrated for the accurate measurement of total neutron production cross sections. The detector consists of a polyethylene sphere of 60 cm diameter in which eight 10 BF 3 counters have been installed radially. The relative efficiency of this detector has been determined for average neutron energies from 30 keV to 1.5 MeV by counting neutrons from 7 Li(p, n) 7 Be. By adjusting the radial positions of the BF 3 counters in the polyethylene sphere the efficiency for neutron detection was made nearly constant for this energy range. Measurement of absolute efficiency for the same neutron energy range has been done by counting the neutrons from 51 V(p, n) 51 Cr and 57 Fe(p, n) 57 Co reactions and determining the absolute number of residual nuclei produced during the measurement of neutron yield. Details of absolute efficiency measurements and the use of the detector for determination of neutron production cross sections are given. (Auth.)

Do the Czech Production Plants Measure the Performance of Energy Processes?

Directory of Open Access Journals (Sweden)

Zuzana Tučková

2016-04-01

Full Text Available The research was focused to the actual situation in Performance Measurement of the energy processes in Czech production plants. The results are back – upped by the previous researches which were aimed to performance measurement methods usage in the whole organizational structure of the plants. Although the most of big industrial companies declared using of modern Performance Measurements methods, the previous researches shown that it is not purely true. The bigger differences were found in the energy area – energy processes. The authors compared the Energy concepts of European Union (EU and Czech Republic (CZ which are very different and do not create any possibilities for manager’s clear decision in the process management strategy of energy processes in their companies. Next step included the Energy department’s analysis. The significant part of energy processes in the production plants is still not mapped, described and summarized to one methodical manual for managing and performance measurement.

Quantifying movements of corrosion products in reinforced concrete using x-ray attenuation measurements

DEFF Research Database (Denmark)

Pease, Bradley Justin; Michel, Alexander; Stang, Henrik

2011-01-01

Corrosion of steel reinforcement, embedded in concrete, may substantially degrade concrete structures due to the expansive nature of corrosion products. Expansion of corrosion products cause tensile stresses to develop and cracks to form in concrete. Extensive research has focused on corrosion...... of corrosion products move into the concrete without generating tensile stresses and cracks in the concrete. Typically, corrosion products are thought to occupy pores, interfacial defects, and/or air voids located near the concrete-steel interface and stresses develop only after filling of these pores. Further....... X-ray attenuation measurements are also capable of detecting cracks. Therefore, this approach provides a direct measurement of the amount and location of reinforcement corrosion products required to induce cracking. Results of a parametric investigation on the impact of water-to-cement ratio (0...

A study of percentage body fat in children via dual energy X-ray absorptiometry (DEXA)

International Nuclear Information System (INIS)

Kawano, Shoji; Yagi, Shinichi; Fujino, Mitsuyoshi; Tanaka, Hiroyuki; Morita, Tetsuro; Fukunaga, Masao

1994-01-01

Percentage body fat was measured using dual energy X-ray absorptiometry (DEXA), bioelectrical impedance analysis (BIA) and skin fold calipers on 26 children (nine in obesity group, 12 in healthy group and 5 in steroid treated group). Mean percent body fat did not differ significantly between methods in the whole subjects as well as the healthy group and the steroid treated group. However, the mean percent body fat using skin fold caliper was higher for the obesity group than the other two. The measurements of all cases in the obesity group by DEXA were higher than those of BIA. There were high correlations among the percent body fat obtained by each technique. According to the analysis of mean regional percent fat, the percent fat of legs was the highest in the healthy and steroid treated group, while there was no regional difference in the obesity group. It should be possible to classify each case in the obesity group into upper segment and lower segment obesity by DEXA. (author)

Upper bounds on quantum uncertainty products and complexity measures

Energy Technology Data Exchange (ETDEWEB)

Guerrero, Angel; Sanchez-Moreno, Pablo; Dehesa, Jesus S. [Department of Atomic, Molecular and Nuclear Physics, University of Granada, Granada (Spain); Department of Applied Mathematics, University of Granada, Granada (Spain) and Institute Carlos I for Computational and Theoretical Physics, University of Granada, Granada (Spain); Department of Atomic, Molecular and Nuclear Physics, University of Granada, Granada (Spain); Institute Carlos I for Computational and Theoretical Physics, University of Granada, Granada (Spain)

2011-10-15

The position-momentum Shannon and Renyi uncertainty products of general quantum systems are shown to be bounded not only from below (through the known uncertainty relations), but also from above in terms of the Heisenberg-Kennard product . Moreover, the Cramer-Rao, Fisher-Shannon, and Lopez-Ruiz, Mancini, and Calbet shape measures of complexity (whose lower bounds have been recently found) are also bounded from above. The improvement of these bounds for systems subject to spherically symmetric potentials is also explicitly given. Finally, applications to hydrogenic and oscillator-like systems are done.

Measurement of Upsilon production in 7 TeV pp collisions at ATLAS

CERN Document Server

Aad, Georges; Abbott, Brad; Abdallah, Jalal; Abdel Khalek, Samah; Abdelalim, Ahmed Ali; Abdinov, Ovsat; Aben, Rosemarie; Abi, Babak; Abolins, Maris; AbouZeid, Ossama; Abramowicz, Halina; Abreu, Henso; Acharya, Bobby Samir; Adamczyk, Leszek; Adams, David; Addy, Tetteh; Adelman, Jahred; Adomeit, Stefanie; Adragna, Paolo; Adye, Tim; Aefsky, Scott; Aguilar-Saavedra, Juan Antonio; Agustoni, Marco; Aharrouche, Mohamed; Ahlen, Steven; Ahles, Florian; Ahmad, Ashfaq; Ahsan, Mahsana; Aielli, Giulio; Åkesson, Torsten Paul Ake; Akimoto, Ginga; Akimov, Andrei; Alam, Mohammad; Alam, Muhammad Aftab; Albert, Justin; Albrand, Solveig; Aleksa, Martin; Aleksandrov, Igor; Alessandria, Franco; Alexa, Calin; Alexander, Gideon; Alexandre, Gauthier; Alexopoulos, Theodoros; Alhroob, Muhammad; Aliev, Malik; Alimonti, Gianluca; Alison, John; Allbrooke, Benedict; Allport, Phillip; Allwood-Spiers, Sarah; Almond, John; Aloisio, Alberto; Alon, Raz; Alonso, Alejandro; Alonso, Francisco; Altheimer, Andrew David; Alvarez Gonzalez, Barbara; Alviggi, Mariagrazia; Amako, Katsuya; Amelung, Christoph; Ammosov, Vladimir; Amor Dos Santos, Susana Patricia; Amorim, Antonio; Amram, Nir; Anastopoulos, Christos; Ancu, Lucian Stefan; Andari, Nansi; Andeen, Timothy; Anders, Christoph Falk; Anders, Gabriel; Anderson, Kelby; Andreazza, Attilio; Andrei, George Victor; Andrieux, Marie-Laure; Anduaga, Xabier; Angelidakis, Stylianos; Anger, Philipp; Angerami, Aaron; Anghinolfi, Francis; Anisenkov, Alexey; Anjos, Nuno; Annovi, Alberto; Antonaki, Ariadni; Antonelli, Mario; Antonov, Alexey; Antos, Jaroslav; Anulli, Fabio; Aoki, Masato; Aoun, Sahar; Aperio Bella, Ludovica; Apolle, Rudi; Arabidze, Giorgi; Aracena, Ignacio; Arai, Yasuo; Arce, Ayana; Arfaoui, Samir; Arguin, Jean-Francois; Argyropoulos, Spyridon; Arik, Engin; Arik, Metin; Armbruster, Aaron James; Arnaez, Olivier; Arnal, Vanessa; Artamonov, Andrei; Artoni, Giacomo; Arutinov, David; Asai, Shoji; Ask, Stefan; Åsman, Barbro; Asquith, Lily; Assamagan, Ketevi; Astbury, Alan; Atkinson, Markus; Aubert, Bernard; Auge, Etienne; Augsten, Kamil; Aurousseau, Mathieu; Avolio, Giuseppe; Axen, David; Azuelos, Georges; Azuma, Yuya; Baak, Max; Baccaglioni, Giuseppe; Bacci, Cesare; Bach, Andre; Bachacou, Henri; Bachas, Konstantinos; Backes, Moritz; Backhaus, Malte; Backus Mayes, John; Badescu, Elisabeta; Bagnaia, Paolo; Bahinipati, Seema; Bai, Yu; Bailey, David; Bain, Travis; Baines, John; Baker, Oliver Keith; Baker, Mark; Baker, Sarah; Balek, Petr; Banas, Elzbieta; Banerjee, Piyali; Banerjee, Swagato; Banfi, Danilo; Bangert, Andrea Michelle; Bansal, Vikas; Bansil, Hardeep Singh; Barak, Liron; Baranov, Sergei; Barbaro Galtieri, Angela; Barber, Tom; Barberio, Elisabetta Luigia; Barberis, Dario; Barbero, Marlon; Bardin, Dmitri; Barillari, Teresa; Barisonzi, Marcello; Barklow, Timothy; Barlow, Nick; Barnett, Bruce; Barnett, Michael; Baroncelli, Antonio; Barone, Gaetano; Barr, Alan; Barreiro, Fernando; Barreiro Guimarães da Costa, João; Bartoldus, Rainer; Barton, Adam Edward; Bartsch, Valeria; Basye, Austin; Bates, Richard; Batkova, Lucia; Batley, Richard; Battaglia, Andreas; Battistin, Michele; Bauer, Florian; Bawa, Harinder Singh; Beale, Steven; Beau, Tristan; Beauchemin, Pierre-Hugues; Beccherle, Roberto; Bechtle, Philip; Beck, Hans Peter; Becker, Anne Kathrin; Becker, Sebastian; Beckingham, Matthew; Becks, Karl-Heinz; Beddall, Andrew; Beddall, Ayda; Bedikian, Sourpouhi; Bednyakov, Vadim; Bee, Christopher; Beemster, Lars; Begel, Michael; Behar Harpaz, Silvia; Behera, Prafulla; Beimforde, Michael; Belanger-Champagne, Camille; Bell, Paul; Bell, William; Bella, Gideon; Bellagamba, Lorenzo; Bellomo, Massimiliano; Belloni, Alberto; Beloborodova, Olga; Belotskiy, Konstantin; Beltramello, Olga; Benary, Odette; Benchekroun, Driss; Bendtz, Katarina; Benekos, Nektarios; Benhammou, Yan; Benhar Noccioli, Eleonora; Benitez Garcia, Jorge-Armando; Benjamin, Douglas; Benoit, Mathieu; Bensinger, James; Benslama, Kamal; Bentvelsen, Stan; Berge, David; Bergeaas Kuutmann, Elin; Berger, Nicolas; Berghaus, Frank; Berglund, Elina; Beringer, Jürg; Bernat, Pauline; Bernhard, Ralf; Bernius, Catrin; Berry, Tracey; Bertella, Claudia; Bertin, Antonio; Bertolucci, Federico; Besana, Maria Ilaria; Besjes, Geert-Jan; Besson, Nathalie; Bethke, Siegfried; Bhimji, Wahid; Bianchi, Riccardo-Maria; Bianchini, Louis; Bianco, Michele; Biebel, Otmar; Bieniek, Stephen Paul; Bierwagen, Katharina; Biesiada, Jed; Biglietti, Michela; Bilokon, Halina; Bindi, Marcello; Binet, Sebastien; Bingul, Ahmet; Bini, Cesare; Biscarat, Catherine; Bittner, Bernhard; Black, Curtis; Black, Kevin; Blair, Robert; Blanchard, Jean-Baptiste; Blanchot, Georges; Blazek, Tomas; Bloch, Ingo; Blocker, Craig; Blocki, Jacek; Blondel, Alain; Blum, Walter; Blumenschein, Ulrike; Bobbink, Gerjan; Bobrovnikov, Victor; Bocchetta, Simona Serena; Bocci, Andrea; Boddy, Christopher Richard; Boehler, Michael; Boek, Jennifer; Boek, Thorsten Tobias; Boelaert, Nele; Bogaerts, Joannes Andreas; Bogdanchikov, Alexander; Bogouch, Andrei; Bohm, Christian; Bohm, Jan; Boisvert, Veronique; Bold, Tomasz; Boldea, Venera; Bolnet, Nayanka Myriam; Bomben, Marco; Bona, Marcella; Boonekamp, Maarten; Bordoni, Stefania; Borer, Claudia; Borisov, Anatoly; Borissov, Guennadi; Borjanovic, Iris; Borri, Marcello; Borroni, Sara; Bortfeldt, Jonathan; Bortolotto, Valerio; Bos, Kors; Boscherini, Davide; Bosman, Martine; Boterenbrood, Hendrik; Bouchami, Jihene; Boudreau, Joseph; Bouhova-Thacker, Evelina Vassileva; Boumediene, Djamel Eddine; Bourdarios, Claire; Bousson, Nicolas; Boveia, Antonio; Boyd, James; Boyko, Igor; Bozovic-Jelisavcic, Ivanka; Bracinik, Juraj; Branchini, Paolo; Brandt, Andrew; Brandt, Gerhard; Brandt, Oleg; Bratzler, Uwe; Brau, Benjamin; Brau, James; Braun, Helmut; Brazzale, Simone Federico; Brelier, Bertrand; Bremer, Johan; Brendlinger, Kurt; Brenner, Richard; Bressler, Shikma; Britton, Dave; Brochu, Frederic; Brock, Ian; Brock, Raymond; Broggi, Francesco; Bromberg, Carl; Bronner, Johanna; Brooijmans, Gustaaf; Brooks, Timothy; Brooks, William; Brown, Gareth; Bruckman de Renstrom, Pawel; Bruncko, Dusan; Bruneliere, Renaud; Brunet, Sylvie; Bruni, Alessia; Bruni, Graziano; Bruschi, Marco; Bryngemark, Lene; Buanes, Trygve; Buat, Quentin; Bucci, Francesca; Buchanan, James; Buchholz, Peter; Buckingham, Ryan; Buckley, Andrew; Buda, Stelian Ioan; Budagov, Ioulian; Budick, Burton; Büscher, Volker; Bugge, Lars; Bulekov, Oleg; Bundock, Aaron Colin; Bunse, Moritz; Buran, Torleiv; Burckhart, Helfried; Burdin, Sergey; Burgess, Thomas; Burke, Stephen; Busato, Emmanuel; Bussey, Peter; Buszello, Claus-Peter; Butler, Bart; Butler, John; Buttar, Craig; Butterworth, Jonathan; Buttinger, William; Byszewski, Marcin; Cabrera Urbán, Susana; Caforio, Davide; Cakir, Orhan; Calafiura, Paolo; Calderini, Giovanni; Calfayan, Philippe; Calkins, Robert; Caloba, Luiz; Caloi, Rita; Calvet, David; Calvet, Samuel; Camacho Toro, Reina; Camarri, Paolo; Cameron, David; Caminada, Lea Michaela; Caminal Armadans, Roger; Campana, Simone; Campanelli, Mario; Canale, Vincenzo; Canelli, Florencia; Canepa, Anadi; Cantero, Josu; Cantrill, Robert; Capasso, Luciano; Capeans Garrido, Maria Del Mar; Caprini, Irinel; Caprini, Mihai; Capriotti, Daniele; Capua, Marcella; Caputo, Regina; Cardarelli, Roberto; Carli, Tancredi; Carlino, Gianpaolo; Carminati, Leonardo; Caron, Bryan; Caron, Sascha; Carquin, Edson; Carrillo-Montoya, German D; Carter, Antony; Carter, Janet; Carvalho, João; Casadei, Diego; Casado, Maria Pilar; Cascella, Michele; Caso, Carlo; Castaneda Hernandez, Alfredo Martin; Castaneda-Miranda, Elizabeth; Castillo Gimenez, Victoria; Castro, Nuno Filipe; Cataldi, Gabriella; Catastini, Pierluigi; Catinaccio, Andrea; Catmore, James; Cattai, Ariella; Cattani, Giordano; Caughron, Seth; Cavaliere, Viviana; Cavalleri, Pietro; Cavalli, Donatella; Cavalli-Sforza, Matteo; Cavasinni, Vincenzo; Ceradini, Filippo; Santiago Cerqueira, Augusto; Cerri, Alessandro; Cerrito, Lucio; Cerutti, Fabio; Cetin, Serkant Ali; Chafaq, Aziz; Chakraborty, Dhiman; Chalupkova, Ina; Chan, Kevin; Chang, Philip; Chapleau, Bertrand; Chapman, John Derek; Chapman, John Wehrley; Charlton, Dave; Chavda, Vikash; Chavez Barajas, Carlos Alberto; Cheatham, Susan; Chekanov, Sergei; Chekulaev, Sergey; Chelkov, Gueorgui; Chelstowska, Magda Anna; Chen, Chunhui; Chen, Hucheng; Chen, Shenjian; Chen, Xin; Chen, Yujiao; Cheng, Yangyang; Cheplakov, Alexander; Cherkaoui El Moursli, Rajaa; Chernyatin, Valeriy; Cheu, Elliott; Cheung, Sing-Leung; Chevalier, Laurent; Chiefari, Giovanni; Chikovani, Leila; Childers, John Taylor; Chilingarov, Alexandre; Chiodini, Gabriele; Chisholm, Andrew; Chislett, Rebecca Thalatta; Chitan, Adrian; Chizhov, Mihail; Choudalakis, Georgios; Chouridou, Sofia; Christidi, Ilektra-Athanasia; Christov, Asen; Chromek-Burckhart, Doris; Chu, Ming-Lee; Chudoba, Jiri; Ciapetti, Guido; Ciftci, Abbas Kenan; Ciftci, Rena; Cinca, Diane; Cindro, Vladimir; Ciocio, Alessandra; Cirilli, Manuela; Cirkovic, Predrag; Citron, Zvi Hirsh; Citterio, Mauro; Ciubancan, Mihai; Clark, Allan G; Clark, Philip James; Clarke, Robert; Cleland, Bill; Clemens, Jean-Claude; Clement, Benoit; Clement, Christophe; Coadou, Yann; Cobal, Marina; Coccaro, Andrea; Cochran, James H; Coffey, Laurel; Cogan, Joshua Godfrey; Coggeshall, James; Colas, Jacques; Cole, Stephen; Colijn, Auke-Pieter; Collins, Neil; Collins-Tooth, Christopher; Collot, Johann; Colombo, Tommaso; Colon, German; Compostella, Gabriele; Conde Muiño, Patricia; Coniavitis, Elias; Conidi, Maria Chiara; Consonni, Sofia Maria; Consorti, Valerio; Constantinescu, Serban; Conta, Claudio; Conti, Geraldine; Conventi, Francesco; Cooke, Mark; Cooper, Ben; Cooper-Sarkar, Amanda; Copic, Katherine; Cornelissen, Thijs; Corradi, Massimo; Corriveau, Francois; Cortes-Gonzalez, Arely; Cortiana, Giorgio; Costa, Giuseppe; Costa, María José; Costanzo, Davide; Côté, David; Courneyea, Lorraine; Cowan, Glen; Cox, Brian; Cranmer, Kyle; Crescioli, Francesco; Cristinziani, Markus; Crosetti, Giovanni; Crépé-Renaudin, Sabine; Cuciuc, Constantin-Mihai; Cuenca Almenar, Cristóbal; Cuhadar Donszelmann, Tulay; Cummings, Jane; Curatolo, Maria; Curtis, Chris; Cuthbert, Cameron; Cwetanski, Peter; Czirr, Hendrik; Czodrowski, Patrick; Czyczula, Zofia; D'Auria, Saverio; D'Onofrio, Monica; D'Orazio, Alessia; Da Cunha Sargedas De Sousa, Mario Jose; Da Via, Cinzia; Dabrowski, Wladyslaw; Dafinca, Alexandru; Dai, Tiesheng; Dallaire, Frederick; Dallapiccola, Carlo; Dam, Mogens; Dameri, Mauro; Damiani, Daniel; Danielsson, Hans Olof; Dao, Valerio; Darbo, Giovanni; Darlea, Georgiana Lavinia; Dassoulas, James; Davey, Will; Davidek, Tomas; Davidson, Nadia; Davidson, Ruth; Davies, Eleanor; Davies, Merlin; Davignon, Olivier; Davison, Adam; Davygora, Yuriy; Dawe, Edmund; Dawson, Ian; Daya-Ishmukhametova, Rozmin; De, Kaushik; de Asmundis, Riccardo; De Castro, Stefano; De Cecco, Sandro; de Graat, Julien; De Groot, Nicolo; de Jong, Paul; De La Taille, Christophe; De la Torre, Hector; De Lorenzi, Francesco; de Mora, Lee; De Nooij, Lucie; De Pedis, Daniele; De Salvo, Alessandro; De Sanctis, Umberto; De Santo, Antonella; De Vivie De Regie, Jean-Baptiste; De Zorzi, Guido; Dearnaley, William James; Debbe, Ramiro; Debenedetti, Chiara; Dechenaux, Benjamin; Dedovich, Dmitri; Degenhardt, James; Del Peso, Jose; Del Prete, Tarcisio; Delemontex, Thomas; Deliyergiyev, Maksym; Dell'Acqua, Andrea; Dell'Asta, Lidia; Della Pietra, Massimo; della Volpe, Domenico; Delmastro, Marco; Delsart, Pierre-Antoine; Deluca, Carolina; Demers, Sarah; Demichev, Mikhail; Demirkoz, Bilge; Denisov, Sergey; Derendarz, Dominik; Derkaoui, Jamal Eddine; Derue, Frederic; Dervan, Paul; Desch, Klaus Kurt; Devetak, Erik; Deviveiros, Pier-Olivier; Dewhurst, Alastair; DeWilde, Burton; Dhaliwal, Saminder; Dhullipudi, Ramasudhakar; Di Ciaccio, Anna; Di Ciaccio, Lucia; Di Donato, Camilla; Di Girolamo, Alessandro; Di Girolamo, Beniamino; Di Luise, Silvestro; Di Mattia, Alessandro; Di Micco, Biagio; Di Nardo, Roberto; Di Simone, Andrea; Di Sipio, Riccardo; Diaz, Marco Aurelio; Diehl, Edward; Dietrich, Janet; Dietzsch, Thorsten; Diglio, Sara; Dindar Yagci, Kamile; Dingfelder, Jochen; Dinut, Florin; Dionisi, Carlo; Dita, Petre; Dita, Sanda; Dittus, Fridolin; Djama, Fares; Djobava, Tamar; Barros do Vale, Maria Aline; Do Valle Wemans, André; Doan, Thi Kieu Oanh; Dobbs, Matt; Dobos, Daniel; Dobson, Ellie; Dodd, Jeremy; Doglioni, Caterina; Doherty, Tom; Doi, Yoshikuni; Dolejsi, Jiri; Dolezal, Zdenek; Dolgoshein, Boris; Dohmae, Takeshi; Donadelli, Marisilvia; Donini, Julien; Dopke, Jens; Doria, Alessandra; Dos Anjos, Andre; Dotti, Andrea; Dova, Maria-Teresa; Doxiadis, Alexander; Doyle, Tony; Dressnandt, Nandor; Dris, Manolis; Dubbert, Jörg; Dube, Sourabh; Duchovni, Ehud; Duckeck, Guenter; Duda, Dominik; Dudarev, Alexey; Dudziak, Fanny; Dührssen, Michael; Duerdoth, Ian; Duflot, Laurent; Dufour, Marc-Andre; Duguid, Liam; Dunford, Monica; Duran Yildiz, Hatice; Duxfield, Robert; Dwuznik, Michal; Düren, Michael; Ebenstein, William; Ebke, Johannes; Eckweiler, Sebastian; Edmonds, Keith; Edson, William; Edwards, Clive; Edwards, Nicholas Charles; Ehrenfeld, Wolfgang; Eifert, Till; Eigen, Gerald; Einsweiler, Kevin; Eisenhandler, Eric; Ekelof, Tord; El Kacimi, Mohamed; Ellert, Mattias; Elles, Sabine; Ellinghaus, Frank; Ellis, Katherine; Ellis, Nicolas; Elmsheuser, Johannes; Elsing, Markus; Emeliyanov, Dmitry; Engelmann, Roderich; Engl, Albert; Epp, Brigitte; Erdmann, Johannes; Ereditato, Antonio; Eriksson, Daniel; Ernst, Jesse; Ernst, Michael; Ernwein, Jean; Errede, Deborah; Errede, Steven; Ertel, Eugen; Escalier, Marc; Esch, Hendrik; Escobar, Carlos; Espinal Curull, Xavier; Esposito, Bellisario; Etienne, Francois; Etienvre, Anne-Isabelle; Etzion, Erez; Evangelakou, Despoina; Evans, Hal; Fabbri, Laura; Fabre, Caroline; Fakhrutdinov, Rinat; Falciano, Speranza; Fang, Yaquan; Fanti, Marcello; Farbin, Amir; Farilla, Addolorata; Farley, Jason; Farooque, Trisha; Farrell, Steven; Farrington, Sinead; Farthouat, Philippe; Fassi, Farida; Fassnacht, Patrick; Fassouliotis, Dimitrios; Fatholahzadeh, Baharak; Favareto, Andrea; Fayard, Louis; Fazio, Salvatore; Federic, Pavol; Fedin, Oleg; Fedorko, Wojciech; Fehling-Kaschek, Mirjam; Feligioni, Lorenzo; Feng, Cunfeng; Feng, Eric; Fenyuk, Alexander; Ferencei, Jozef; Fernando, Waruna; Ferrag, Samir; Ferrando, James; Ferrara, Valentina; Ferrari, Arnaud; Ferrari, Pamela; Ferrari, Roberto; Ferreira de Lima, Danilo Enoque; Ferrer, Antonio; Ferrere, Didier; Ferretti, Claudio; Ferretto Parodi, Andrea; Fiascaris, Maria; Fiedler, Frank; Filipčič, Andrej; Filthaut, Frank; Fincke-Keeler, Margret; Fiolhais, Miguel; Fiorini, Luca; Firan, Ana; Fischer, Gordon; Fisher, Matthew; Flechl, Martin; Fleck, Ivor; Fleckner, Johanna; Fleischmann, Philipp; Fleischmann, Sebastian; Flick, Tobias; Floderus, Anders; Flores Castillo, Luis; Florez Bustos, Andres Carlos; Flowerdew, Michael; Fonseca Martin, Teresa; Formica, Andrea; Forti, Alessandra; Fortin, Dominique; Fournier, Daniel; Fowler, Andrew; Fox, Harald; Francavilla, Paolo; Franchini, Matteo; Franchino, Silvia; Francis, David; Frank, Tal; Franklin, Melissa; Franz, Sebastien; Fraternali, Marco; Fratina, Sasa; French, Sky; Friedrich, Conrad; Friedrich, Felix; Froidevaux, Daniel; Frost, James; Fukunaga, Chikara; Fullana Torregrosa, Esteban; Fulsom, Bryan Gregory; Fuster, Juan; Gabaldon, Carolina; Gabizon, Ofir; Gadfort, Thomas; Gadomski, Szymon; Gagliardi, Guido; Gagnon, Pauline; Galea, Cristina; Galhardo, Bruno; Gallas, Elizabeth; Gallo, Valentina Santina; Gallop, Bruce; Gallus, Petr; Gan, KK; Gao, Yongsheng; Gaponenko, Andrei; Garberson, Ford; Garcia-Sciveres, Maurice; García, Carmen; García Navarro, José Enrique; Gardner, Robert; Garelli, Nicoletta; Garitaonandia, Hegoi; Garonne, Vincent; Gatti, Claudio; Gaudio, Gabriella; Gaur, Bakul; Gauthier, Lea; Gauzzi, Paolo; Gavrilenko, Igor; Gay, Colin; Gaycken, Goetz; Gazis, Evangelos; Ge, Peng; Gecse, Zoltan; Gee, Norman; Geerts, Daniël Alphonsus Adrianus; Geich-Gimbel, Christoph; Gellerstedt, Karl; Gemme, Claudia; Gemmell, Alistair; Genest, Marie-Hélène; Gentile, Simonetta; George, Matthias; George, Simon; Gerbaudo, Davide; Gerlach, Peter; Gershon, Avi; Geweniger, Christoph; Ghazlane, Hamid; Ghodbane, Nabil; Giacobbe, Benedetto; Giagu, Stefano; Giangiobbe, Vincent; Gianotti, Fabiola; Gibbard, Bruce; Gibson, Adam; Gibson, Stephen; Gilchriese, Murdock; Gillberg, Dag; Gillman, Tony; Gingrich, Douglas; Ginzburg, Jonatan; Giokaris, Nikos; Giordani, MarioPaolo; Giordano, Raffaele; Giorgi, Francesco Michelangelo; Giovannini, Paola; Giraud, Pierre-Francois; Giugni, Danilo; Giunta, Michele; Gjelsten, Børge Kile; Gladilin, Leonid; Glasman, Claudia; Glatzer, Julian; Glazov, Alexandre; Glitza, Karl-Walter; Glonti, George; Goddard, Jack Robert; Godfrey, Jennifer; Godlewski, Jan; Goebel, Martin; Göpfert, Thomas; Goeringer, Christian; Gössling, Claus; Goldfarb, Steven; Golling, Tobias; Golubkov, Dmitry; Gomes, Agostinho; Gomez Fajardo, Luz Stella; Gonçalo, Ricardo; Goncalves Pinto Firmino Da Costa, Joao; Gonella, Laura; González de la Hoz, Santiago; Gonzalez Parra, Garoe; Gonzalez Silva, Laura; Gonzalez-Sevilla, Sergio; Goodson, Jeremiah Jet; Goossens, Luc; Gorbounov, Petr Andreevich; Gordon, Howard; Gorelov, Igor; Gorfine, Grant; Gorini, Benedetto; Gorini, Edoardo; Gorišek, Andrej; Gornicki, Edward; Goshaw, Alfred; Gosselink, Martijn; Gostkin, Mikhail Ivanovitch; Gough Eschrich, Ivo; Gouighri, Mohamed; Goujdami, Driss; Goulette, Marc Phillippe; Goussiou, Anna; Goy, Corinne; Gozpinar, Serdar; Grabowska-Bold, Iwona; Grafström, Per; Grahn, Karl-Johan; Gramstad, Eirik; Grancagnolo, Francesco; Grancagnolo, Sergio; Grassi, Valerio; Gratchev, Vadim; Grau, Nathan; Gray, Heather; Gray, Julia Ann; Graziani, Enrico; Grebenyuk, Oleg; Greenshaw, Timothy; Greenwood, Zeno Dixon; Gregersen, Kristian; Gregor, Ingrid-Maria; Grenier, Philippe; Griffiths, Justin; Grigalashvili, Nugzar; Grillo, Alexander; Grinstein, Sebastian; Gris, Philippe Luc Yves; Grishkevich, Yaroslav; Grivaz, Jean-Francois; Gross, Eilam; Grosse-Knetter, Joern; Groth-Jensen, Jacob; Grybel, Kai; Guest, Daniel; Guicheney, Christophe; Guido, Elisa; Guindon, Stefan; Gul, Umar; Gunther, Jaroslav; Guo, Bin; Guo, Jun; Gutierrez, Phillip; Guttman, Nir; Gutzwiller, Olivier; Guyot, Claude; Gwenlan, Claire; Gwilliam, Carl; Haas, Andy; Haas, Stefan; Haber, Carl; Hadavand, Haleh Khani; Hadley, David; Haefner, Petra; Hahn, Ferdinand; Hajduk, Zbigniew; Hakobyan, Hrachya; Hall, David; Hamacher, Klaus; Hamal, Petr; Hamano, Kenji; Hamer, Matthias; Hamilton, Andrew; Hamilton, Samuel; Han, Liang; Hanagaki, Kazunori; Hanawa, Keita; Hance, Michael; Handel, Carsten; Hanke, Paul; Hansen, John Renner; Hansen, Jørgen Beck; Hansen, Jorn Dines; Hansen, Peter Henrik; Hansson, Per; Hara, Kazuhiko; Harenberg, Torsten; Harkusha, Siarhei; Harper, Devin; Harrington, Robert; Harris, Orin; Hartert, Jochen; Hartjes, Fred; Haruyama, Tomiyoshi; Harvey, Alex; Hasegawa, Satoshi; Hasegawa, Yoji; Hassani, Samira; Haug, Sigve; Hauschild, Michael; Hauser, Reiner; Havranek, Miroslav; Hawkes, Christopher; Hawkings, Richard John; Hawkins, Anthony David; Hayakawa, Takashi; Hayashi, Takayasu; Hayden, Daniel; Hays, Chris; Hayward, Helen; Haywood, Stephen; Head, Simon; Hedberg, Vincent; Heelan, Louise; Heim, Sarah; Heinemann, Beate; Heisterkamp, Simon; Helary, Louis; Heller, Claudio; Heller, Matthieu; Hellman, Sten; Hellmich, Dennis; Helsens, Clement; Henderson, Robert; Henke, Michael; Henrichs, Anna; Henriques Correia, Ana Maria; Henrot-Versille, Sophie; Hensel, Carsten; Medina Hernandez, Carlos; Hernández Jiménez, Yesenia; Herrberg, Ruth; Herten, Gregor; Hertenberger, Ralf; Hervas, Luis; Hesketh, Gavin Grant; Hessey, Nigel; Higón-Rodriguez, Emilio; Hill, John; Hiller, Karl Heinz; Hillert, Sonja; Hillier, Stephen; Hinchliffe, Ian; Hines, Elizabeth; Hirose, Minoru; Hirsch, Florian; Hirschbuehl, Dominic; Hobbs, John; Hod, Noam; Hodgkinson, Mark; Hodgson, Paul; Hoecker, Andreas; Hoeferkamp, Martin; Hoffman, Julia; Hoffmann, Dirk; Hohlfeld, Marc; Holder, Martin; Holmgren, Sven-Olof; Holy, Tomas; Holzbauer, Jenny; Hong, Tae Min; Hooft van Huysduynen, Loek; Horner, Stephan; Hostachy, Jean-Yves; Hou, Suen; Hoummada, Abdeslam; Howard, Jacob; Howarth, James; Hristova, Ivana; Hrivnac, Julius; Hryn'ova, Tetiana; Hsu, Pai-hsien Jennifer; Hsu, Shih-Chieh; Hu, Diedi; Hubacek, Zdenek; Hubaut, Fabrice; Huegging, Fabian; Huettmann, Antje; Huffman, Todd Brian; Hughes, Emlyn; Hughes, Gareth; Huhtinen, Mika; Hurwitz, Martina; Huseynov, Nazim; Huston, Joey; Huth, John; Iacobucci, Giuseppe; Iakovidis, Georgios; Ibbotson, Michael; Ibragimov, Iskander; Iconomidou-Fayard, Lydia; Idarraga, John; Iengo, Paolo; Igonkina, Olga; Ikegami, Yoichi; Ikeno, Masahiro; Iliadis, Dimitrios; Ilic, Nikolina; Ince, Tayfun; Ioannou, Pavlos; Iodice, Mauro; Iordanidou, Kalliopi; Ippolito, Valerio; Irles Quiles, Adrian; Isaksson, Charlie; Ishino, Masaya; Ishitsuka, Masaki; Ishmukhametov, Renat; Issever, Cigdem; Istin, Serhat; Ivashin, Anton; Iwanski, Wieslaw; Iwasaki, Hiroyuki; Izen, Joseph; Izzo, Vincenzo; Jackson, Brett; Jackson, John; Jackson, Paul; Jaekel, Martin; Jain, Vivek; Jakobs, Karl; Jakobsen, Sune; Jakoubek, Tomas; Jakubek, Jan; Jamin, David Olivier; Jana, Dilip; Jansen, Eric; Jansen, Hendrik; Janssen, Jens; Jantsch, Andreas; Janus, Michel; Jared, Richard; Jarlskog, Göran; Jeanty, Laura; Jen-La Plante, Imai; Jennens, David; Jenni, Peter; Loevschall-Jensen, Ask Emil; Jež, Pavel; Jézéquel, Stéphane; Jha, Manoj Kumar; Ji, Haoshuang; Ji, Weina; Jia, Jiangyong; Jiang, Yi; Jimenez Belenguer, Marcos; Jin, Shan; Jinnouchi, Osamu; Joergensen, Morten Dam; Joffe, David; Johansen, Marianne; Johansson, Erik; Johansson, Per; Johnert, Sebastian; Johns, Kenneth; Jon-And, Kerstin; Jones, Graham; Jones, Roger; Jones, Tim; Joram, Christian; Jorge, Pedro; Joshi, Kiran Daniel; Jovicevic, Jelena; Jovin, Tatjana; Ju, Xiangyang; Jung, Christian; Jungst, Ralph Markus; Juranek, Vojtech; Jussel, Patrick; Juste Rozas, Aurelio; Kabana, Sonja; Kaci, Mohammed; Kaczmarska, Anna; Kadlecik, Peter; Kado, Marumi; Kagan, Harris; Kagan, Michael; Kajomovitz, Enrique; Kalinin, Sergey; Kalinovskaya, Lidia; Kama, Sami; Kanaya, Naoko; Kaneda, Michiru; Kaneti, Steven; Kanno, Takayuki; Kantserov, Vadim; Kanzaki, Junichi; Kaplan, Benjamin; Kapliy, Anton; Kaplon, Jan; Kar, Deepak; Karagounis, Michael; Karakostas, Konstantinos; Karnevskiy, Mikhail; Kartvelishvili, Vakhtang; Karyukhin, Andrey; Kashif, Lashkar; Kasieczka, Gregor; Kass, Richard; Kastanas, Alex; Kataoka, Mayuko; Kataoka, Yousuke; Katzy, Judith; Kaushik, Venkatesh; Kawagoe, Kiyotomo; Kawamoto, Tatsuo; Kawamura, Gen; Kayl, Manuel; Kazama, Shingo; Kazanin, Vassili; Kazarinov, Makhail; Keeler, Richard; Keener, Paul; Kehoe, Robert; Keil, Markus; Kekelidze, George; Keller, John; Kenyon, Mike; Kepka, Oldrich; Kerschen, Nicolas; Kerševan, Borut Paul; Kersten, Susanne; Kessoku, Kohei; Keung, Justin; Khalil-zada, Farkhad; Khandanyan, Hovhannes; Khanov, Alexander; Kharchenko, Dmitri; Khodinov, Alexander; Khomich, Andrei; Khoo, Teng Jian; Khoriauli, Gia; Khoroshilov, Andrey; Khovanskiy, Valery; Khramov, Evgeniy; Khubua, Jemal; Kim, Hyeon Jin; Kim, Shinhong; Kimura, Naoki; Kind, Oliver; King, Barry; King, Matthew; King, Robert Steven Beaufoy; Kirk, Julie; Kiryunin, Andrey; Kishimoto, Tomoe; Kisielewska, Danuta; Kitamura, Takumi; Kittelmann, Thomas; Kiuchi, Kenji; Kladiva, Eduard; Klein, Max; Klein, Uta; Kleinknecht, Konrad; Klemetti, Miika; Klier, Amit; Klimek, Pawel; Klimentov, Alexei; Klingenberg, Reiner; Klinger, Joel Alexander; Klinkby, Esben; Klioutchnikova, Tatiana; Klok, Peter; Klous, Sander; Kluge, Eike-Erik; Kluge, Thomas; Kluit, Peter; Kluth, Stefan; Kneringer, Emmerich; Knoops, Edith; Knue, Andrea; Ko, Byeong Rok; Kobayashi, Tomio; Kobel, Michael; Kocian, Martin; Kodys, Peter; Köneke, Karsten; König, Adriaan; Koenig, Sebastian; Köpke, Lutz; Koetsveld, Folkert; Koevesarki, Peter; Koffas, Thomas; Koffeman, Els; Kogan, Lucy Anne; Kohlmann, Simon; Kohn, Fabian; Kohout, Zdenek; Kohriki, Takashi; Koi, Tatsumi; Kolachev, Guennady; Kolanoski, Hermann; Kolesnikov, Vladimir; Koletsou, Iro; Koll, James; Komar, Aston; Komori, Yuto; Kondo, Takahiko; Kono, Takanori; Kononov, Anatoly; Konoplich, Rostislav; Konstantinidis, Nikolaos; Kopeliansky, Revital; Koperny, Stefan; Korcyl, Krzysztof; Kordas, Kostantinos; Korn, Andreas; Korol, Aleksandr; Korolkov, Ilya; Korolkova, Elena; Korotkov, Vladislav; Kortner, Oliver; Kortner, Sandra; Kostyukhin, Vadim; Kotov, Sergey; Kotov, Vladislav; Kotwal, Ashutosh; Kourkoumelis, Christine; Kouskoura, Vasiliki; Koutsman, Alex; Kowalewski, Robert Victor; Kowalski, Tadeusz; Kozanecki, Witold; Kozhin, Anatoly; Kral, Vlastimil; Kramarenko, Viktor; Kramberger, Gregor; Krasny, Mieczyslaw Witold; Krasznahorkay, Attila; Kraus, Jana; Kravchenko, Anton; Kreiss, Sven; Krejci, Frantisek; Kretzschmar, Jan; Kreutzfeldt, Kristof; Krieger, Nina; Krieger, Peter; Kroeninger, Kevin; Kroha, Hubert; Kroll, Joe; Kroseberg, Juergen; Krstic, Jelena; Kruchonak, Uladzimir; Krüger, Hans; Kruker, Tobias; Krumnack, Nils; Krumshteyn, Zinovii; Kruse, Mark; Kubota, Takashi; Kuday, Sinan; Kuehn, Susanne; Kugel, Andreas; Kuhl, Thorsten; Kuhn, Dietmar; Kukhtin, Victor; Kulchitsky, Yuri; Kuleshov, Sergey; Kummer, Christian; Kuna, Marine; Kunkle, Joshua; Kupco, Alexander; Kurashige, Hisaya; Kurata, Masakazu; Kurochkin, Yurii; Kus, Vlastimil; Kuwertz, Emma Sian; Kuze, Masahiro; Kvita, Jiri; Kwee, Regina; La Rosa, Alessandro; La Rotonda, Laura; Labarga, Luis; Lablak, Said; Lacasta, Carlos; Lacava, Francesco; Lacey, James; Lacker, Heiko; Lacour, Didier; Lacuesta, Vicente Ramón; Ladygin, Evgueni; Lafaye, Remi; Laforge, Bertrand; Lagouri, Theodota; Lai, Stanley; Laisne, Emmanuel; Lambourne, Luke; Lampen, Caleb; Lampl, Walter; Lancon, Eric; Landgraf, Ulrich; Landon, Murrough; Lang, Valerie Susanne; Lange, Clemens; Lankford, Andrew; Lanni, Francesco; Lantzsch, Kerstin; Lanza, Agostino; Laplace, Sandrine; Lapoire, Cecile; Laporte, Jean-Francois; Lari, Tommaso; Larner, Aimee; Lassnig, Mario; Laurelli, Paolo; Lavorini, Vincenzo; Lavrijsen, Wim; Laycock, Paul; Le Dortz, Olivier; Le Guirriec, Emmanuel; Le Menedeu, Eve; LeCompte, Thomas; Ledroit-Guillon, Fabienne Agnes Marie; Lee, Hurng-Chun; Lee, Jason; Lee, Shih-Chang; Lee, Lawrence; Lefebvre, Michel; Legendre, Marie; Legger, Federica; Leggett, Charles; Lehmacher, Marc; Lehmann Miotto, Giovanna; Leister, Andrew Gerard; Leite, Marco Aurelio Lisboa; Leitner, Rupert; Lellouch, Daniel; Lemmer, Boris; Lendermann, Victor; Leney, Katharine; Lenz, Tatiana; Lenzen, Georg; Lenzi, Bruno; Leonhardt, Kathrin; Leontsinis, Stefanos; Lepold, Florian; Leroy, Claude; Lessard, Jean-Raphael; Lester, Christopher; Lester, Christopher Michael; Levêque, Jessica; Levin, Daniel; Levinson, Lorne; Lewis, Adrian; Lewis, George; Leyko, Agnieszka; Leyton, Michael; Li, Bing; Li, Bo; Li, Haifeng; Li, Ho Ling; Li, Shu; Li, Xuefei; Liang, Zhijun; Liao, Hongbo; Liberti, Barbara; Lichard, Peter; Lichtnecker, Markus; Lie, Ki; Liebig, Wolfgang; Limbach, Christian; Limosani, Antonio; Limper, Maaike; Lin, Simon; Linde, Frank; Linnemann, James; Lipeles, Elliot; Lipniacka, Anna; Liss, Tony; Lissauer, David; Lister, Alison; Litke, Alan; Liu, Chuanlei; Liu, Dong; Liu, Jianbei; Liu, Lulu; Liu, Minghui; Liu, Yanwen; Livan, Michele; Livermore, Sarah; Lleres, Annick; Llorente Merino, Javier; Lloyd, Stephen; Lobodzinska, Ewelina; Loch, Peter; Lockman, William; Loddenkoetter, Thomas; Loebinger, Fred; Loginov, Andrey; Loh, Chang Wei; Lohse, Thomas; Lohwasser, Kristin; Lokajicek, Milos; Lombardo, Vincenzo Paolo; Long, Robin Eamonn; Lopes, Lourenco; Lopez Mateos, David; Lorenz, Jeanette; Lorenzo Martinez, Narei; Losada, Marta; Loscutoff, Peter; Lo Sterzo, Francesco; Losty, Michael; Lou, XinChou; Lounis, Abdenour; Loureiro, Karina; Love, Jeremy; Love, Peter; Lowe, Andrew; Lu, Feng; Lubatti, Henry; Luci, Claudio; Lucotte, Arnaud; Ludwig, Andreas; Ludwig, Dörthe; Ludwig, Inga; Ludwig, Jens; Luehring, Frederick; Luijckx, Guy; Lukas, Wolfgang; Luminari, Lamberto; Lund, Esben; Lund-Jensen, Bengt; Lundberg, Björn; Lundberg, Johan; Lundberg, Olof; Lundquist, Johan; Lungwitz, Matthias; Lynn, David; Lytken, Else; Ma, Hong; Ma, Lian Liang; Maccarrone, Giovanni; Macchiolo, Anna; Maček, Boštjan; Machado Miguens, Joana; Macina, Daniela; Mackeprang, Rasmus; Madaras, Ronald; Maddocks, Harvey Jonathan; Mader, Wolfgang; Maenner, Reinhard; Maeno, Tadashi; Mättig, Peter; Mättig, Stefan; Magnoni, Luca; Magradze, Erekle; Mahboubi, Kambiz; Mahlstedt, Joern; Mahmoud, Sara; Mahout, Gilles; Maiani, Camilla; Maidantchik, Carmen; Maio, Amélia; Majewski, Stephanie; Makida, Yasuhiro; Makovec, Nikola; Mal, Prolay; Malaescu, Bogdan; Malecki, Pawel; Malecki, Piotr; Maleev, Victor; Malek, Fairouz; Mallik, Usha; Malon, David; Malone, Caitlin; Maltezos, Stavros; Malyshev, Vladimir; Malyukov, Sergei; Mamuzic, Judita; Manabe, Atsushi; Mandelli, Luciano; Mandić, Igor; Mandrysch, Rocco; Maneira, José; Manfredini, Alessandro; Manhaes de Andrade Filho, Luciano; Manjarres Ramos, Joany Andreina; Mann, Alexander; Manning, Peter; Manousakis-Katsikakis, Arkadios; Mansoulie, Bruno; Mapelli, Alessandro; Mapelli, Livio; March, Luis; Marchand, Jean-Francois; Marchese, Fabrizio; Marchiori, Giovanni; Marcisovsky, Michal; Marino, Christopher; Marroquim, Fernando; Marshall, Zach; Marti, Lukas Fritz; Marti-Garcia, Salvador; Martin, Brian; Martin, Brian Thomas; Martin, Jean-Pierre; Martin, Tim; Martin, Victoria Jane; Martin dit Latour, Bertrand; Martin-Haugh, Stewart; Martinez, Mario; Martinez Outschoorn, Verena; Martyniuk, Alex; Marx, Marilyn; Marzano, Francesco; Marzin, Antoine; Masetti, Lucia; Mashimo, Tetsuro; Mashinistov, Ruslan; Masik, Jiri; Maslennikov, Alexey; Massa, Ignazio; Massaro, Graziano; Massol, Nicolas; Mastrandrea, Paolo; Mastroberardino, Anna; Masubuchi, Tatsuya; Matsunaga, Hiroyuki; Matsushita, Takashi; Mattravers, Carly; Maurer, Julien; Maxfield, Stephen; Maximov, Dmitriy; Mayne, Anna; Mazini, Rachid; Mazur, Michael; Mazzaferro, Luca; Mazzanti, Marcello; Mc Donald, Jeffrey; Mc Kee, Shawn Patrick; McCarn, Allison; McCarthy, Robert; McCarthy, Tom; McCubbin, Norman; McFarlane, Kenneth; Mcfayden, Josh; Mchedlidze, Gvantsa; Mclaughlan, Tom; McMahon, Steve; McPherson, Robert; Meade, Andrew; Mechnich, Joerg; Mechtel, Markus; Medinnis, Mike; Meehan, Samuel; Meera-Lebbai, Razzak; Meguro, Tatsuma; Mehlhase, Sascha; Mehta, Andrew; Meier, Karlheinz; Meirose, Bernhard; Melachrinos, Constantinos; Mellado Garcia, Bruce Rafael; Meloni, Federico; Mendoza Navas, Luis; Meng, Zhaoxia; Mengarelli, Alberto; Menke, Sven; Meoni, Evelin; Mercurio, Kevin Michael; Mermod, Philippe; Merola, Leonardo; Meroni, Chiara; Merritt, Frank; Merritt, Hayes; Messina, Andrea; Metcalfe, Jessica; Mete, Alaettin Serhan; Meyer, Carsten; Meyer, Christopher; Meyer, Jean-Pierre; Meyer, Jochen; Meyer, Joerg; Michal, Sebastien; Micu, Liliana; Middleton, Robin; Migas, Sylwia; Mijović, Liza; Mikenberg, Giora; Mikestikova, Marcela; Mikuž, Marko; Miller, David; Miller, Robert; Mills, Bill; Mills, Corrinne; Milov, Alexander; Milstead, David; Milstein, Dmitry; Minaenko, Andrey; Miñano Moya, Mercedes; Minashvili, Irakli; Mincer, Allen; Mindur, Bartosz; Mineev, Mikhail; Ming, Yao; Mir, Lluisa-Maria; Mirabelli, Giovanni; Mitrevski, Jovan; Mitsou, Vasiliki A; Mitsui, Shingo; Miyagawa, Paul; Mjörnmark, Jan-Ulf; Moa, Torbjoern; Moeller, Victoria; Mönig, Klaus; Möser, Nicolas; Mohapatra, Soumya; Mohr, Wolfgang; Moles-Valls, Regina; Molfetas, Angelos; Monk, James; Monnier, Emmanuel; Montejo Berlingen, Javier; Monticelli, Fernando; Monzani, Simone; Moore, Roger; Moorhead, Gareth; Mora Herrera, Clemencia; Moraes, Arthur; Morange, Nicolas; Morel, Julien; Morello, Gianfranco; Moreno, Deywis; Moreno Llácer, María; Morettini, Paolo; Morgenstern, Marcus; Morii, Masahiro; Morley, Anthony Keith; Mornacchi, Giuseppe; Morris, John; Morvaj, Ljiljana; Moser, Hans-Guenther; Mosidze, Maia; Moss, Josh; Mount, Richard; Mountricha, Eleni; Mouraviev, Sergei; Moyse, Edward; Mueller, Felix; Mueller, James; Mueller, Klemens; Müller, Thomas; Mueller, Timo; Muenstermann, Daniel; Munwes, Yonathan; Murray, Bill; Mussche, Ido; Musto, Elisa; Myagkov, Alexey; Myska, Miroslav; Nackenhorst, Olaf; Nadal, Jordi; Nagai, Koichi; Nagai, Ryo; Nagano, Kunihiro; Nagarkar, Advait; Nagasaka, Yasushi; Nagel, Martin; Nairz, Armin Michael; Nakahama, Yu; Nakamura, Koji; Nakamura, Tomoaki; Nakano, Itsuo; Nanava, Gizo; Napier, Austin; Narayan, Rohin; Nash, Michael; Nattermann, Till; Naumann, Thomas; Navarro, Gabriela; Neal, Homer; Nechaeva, Polina; Neep, Thomas James; Negri, Andrea; Negri, Guido; Negrini, Matteo; Nektarijevic, Snezana; Nelson, Andrew; Nelson, Timothy Knight; Nemecek, Stanislav; Nemethy, Peter; Nepomuceno, Andre Asevedo; Nessi, Marzio; Neubauer, Mark; Neumann, Manuel; Neusiedl, Andrea; Neves, Ricardo; Nevski, Pavel; Newcomer, Mitchel; Newman, Paul; Nguyen Thi Hong, Van; Nickerson, Richard; Nicolaidou, Rosy; Nicquevert, Bertrand; Niedercorn, Francois; Nielsen, Jason; Nikiforou, Nikiforos; Nikiforov, Andriy; Nikolaenko, Vladimir; Nikolic-Audit, Irena; Nikolics, Katalin; Nikolopoulos, Konstantinos; Nilsen, Henrik; Nilsson, Paul; Ninomiya, Yoichi; Nisati, Aleandro; Nisius, Richard; Nobe, Takuya; Nodulman, Lawrence; Nomachi, Masaharu; Nomidis, Ioannis; Norberg, Scarlet; Nordberg, Markus; Norton, Peter; Novakova, Jana; Nozaki, Mitsuaki; Nozka, Libor; Nugent, Ian Michael; Nuncio-Quiroz, Adriana-Elizabeth; Nunes Hanninger, Guilherme; Nunnemann, Thomas; Nurse, Emily; O'Brien, Brendan Joseph; O'Neil, Dugan; O'Shea, Val; Oakes, Louise Beth; Oakham, Gerald; Oberlack, Horst; Ocariz, Jose; Ochi, Atsuhiko; Oda, Susumu; Odaka, Shigeru; Odier, Jerome; Ogren, Harold; Oh, Alexander; Oh, Seog; Ohm, Christian; Ohshima, Takayoshi; Okamura, Wataru; Okawa, Hideki; Okumura, Yasuyuki; Okuyama, Toyonobu; Olariu, Albert; Olchevski, Alexander; Olivares Pino, Sebastian Andres; Oliveira, Miguel Alfonso; Oliveira Damazio, Denis; Oliver Garcia, Elena; Olivito, Dominick; Olszewski, Andrzej; Olszowska, Jolanta; Onofre, António; Onyisi, Peter; Oram, Christopher; Oreglia, Mark; Oren, Yona; Orestano, Domizia; Orlando, Nicola; Orlov, Iliya; Oropeza Barrera, Cristina; Orr, Robert; Osculati, Bianca; Ospanov, Rustem; Osuna, Carlos; Otero y Garzon, Gustavo; Ottersbach, John; Ouchrif, Mohamed; Ouellette, Eric; Ould-Saada, Farid; Ouraou, Ahmimed; Ouyang, Qun; Ovcharova, Ana; Owen, Mark; Owen, Simon; Ozcan, Veysi Erkcan; Ozturk, Nurcan; Pacheco Pages, Andres; Padilla Aranda, Cristobal; Pagan Griso, Simone; Paganis, Efstathios; Pahl, Christoph; Paige, Frank; Pais, Preema; Pajchel, Katarina; Palacino, Gabriel; Paleari, Chiara; Palestini, Sandro; Pallin, Dominique; Palma, Alberto; Palmer, Jody; Pan, Yibin; Panagiotopoulou, Evgenia; Panduro Vazquez, William; Pani, Priscilla; Panikashvili, Natalia; Panitkin, Sergey; Pantea, Dan; Papadelis, Aras; Papadopoulou, Theodora; Paramonov, Alexander; Paredes Hernandez, Daniela; Park, Woochun; Parker, Andy; Parodi, Fabrizio; Parsons, John; Parzefall, Ulrich; Pashapour, Shabnaz; Pasqualucci, Enrico; Passaggio, Stefano; Passeri, Antonio; Pastore, Fernanda; Pastore, Francesca; Pásztor, Gabriella; Pataraia, Sophio; Patel, Nikhul; Pater, Joleen; Patricelli, Sergio; Pauly, Thilo; Pecsy, Martin; Pedraza Lopez, Sebastian; Pedraza Morales, Maria Isabel; Peleganchuk, Sergey; Pelikan, Daniel; Peng, Haiping; Penning, Bjoern; Penson, Alexander; Penwell, John; Perantoni, Marcelo; Perez, Kerstin; Perez Cavalcanti, Tiago; Perez Codina, Estel; Pérez García-Estañ, María Teresa; Perez Reale, Valeria; Perini, Laura; Pernegger, Heinz; Perrino, Roberto; Perrodo, Pascal; Peshekhonov, Vladimir; Peters, Krisztian; Petersen, Brian; Petersen, Jorgen; Petersen, Troels; Petit, Elisabeth; Petridis, Andreas; Petridou, Chariclia; Petrolo, Emilio; Petrucci, Fabrizio; Petschull, Dennis; Petteni, Michele; Pezoa, Raquel; Phan, Anna; Phillips, Peter William; Piacquadio, Giacinto; Picazio, Attilio; Piccaro, Elisa; Piccinini, Maurizio; Piec, Sebastian Marcin; Piegaia, Ricardo; Pignotti, David; Pilcher, James; Pilkington, Andrew; Pina, João Antonio; Pinamonti, Michele; Pinder, Alex; Pinfold, James; Pingel, Almut; Pinto, Belmiro; Pizio, Caterina; Pleier, Marc-Andre; Plotnikova, Elena; Poblaguev, Andrei; Poddar, Sahill; Podlyski, Fabrice; Poggioli, Luc; Pohl, David-leon; Pohl, Martin; Polesello, Giacomo; Policicchio, Antonio; Polini, Alessandro; Poll, James; Polychronakos, Venetios; Pomeroy, Daniel; Pommès, Kathy; Pontecorvo, Ludovico; Pope, Bernard; Popeneciu, Gabriel Alexandru; Popovic, Dragan; Poppleton, Alan; Portell Bueso, Xavier; Pospelov, Guennady; Pospisil, Stanislav; Potrap, Igor; Potter, Christina; Potter, Christopher; Poulard, Gilbert; Poveda, Joaquin; Pozdnyakov, Valery; Prabhu, Robindra; Pralavorio, Pascal; Pranko, Aliaksandr; Prasad, Srivas; Pravahan, Rishiraj; Prell, Soeren; Pretzl, Klaus Peter; Price, Darren; Price, Joe; Price, Lawrence; Prieur, Damien; Primavera, Margherita; Prokofiev, Kirill; Prokoshin, Fedor; Protopopescu, Serban; Proudfoot, James; Prudent, Xavier; Przybycien, Mariusz; Przysiezniak, Helenka; Psoroulas, Serena; Ptacek, Elizabeth; Pueschel, Elisa; Purdham, John; Purohit, Milind; Puzo, Patrick; Pylypchenko, Yuriy; Qian, Jianming; Quadt, Arnulf; Quarrie, David; Quayle, William; Raas, Marcel; Radeka, Veljko; Radescu, Voica; Radloff, Peter; Ragusa, Francesco; Rahal, Ghita; Rahimi, Amir; Rahm, David; Rajagopalan, Srinivasan; Rammensee, Michael; Rammes, Marcus; Randle-Conde, Aidan Sean; Randrianarivony, Koloina; Rao, Kanury; Rauscher, Felix; Rave, Tobias Christian; Raymond, Michel; Read, Alexander Lincoln; Rebuzzi, Daniela; Redelbach, Andreas; Redlinger, George; Reece, Ryan; Reeves, Kendall; Reinsch, Andreas; Reisinger, Ingo; Rembser, Christoph; Ren, Zhongliang; Renaud, Adrien; Rescigno, Marco; Resconi, Silvia; Resende, Bernardo; Reznicek, Pavel; Rezvani, Reyhaneh; Richter, Robert; Richter-Was, Elzbieta; Ridel, Melissa; Rijpstra, Manouk; Rijssenbeek, Michael; Rimoldi, Adele; Rinaldi, Lorenzo; Rios, Ryan Randy; Riu, Imma; Rivoltella, Giancesare; Rizatdinova, Flera; Rizvi, Eram; Robertson, Steven; Robichaud-Veronneau, Andree; Robinson, Dave; Robinson, James; Robson, Aidan; Rocha de Lima, Jose Guilherme; Roda, Chiara; Roda Dos Santos, Denis; Roe, Adam; Roe, Shaun; Røhne, Ole; Rolli, Simona; Romaniouk, Anatoli; Romano, Marino; Romeo, Gaston; Romero Adam, Elena; Rompotis, Nikolaos; Roos, Lydia; Ros, Eduardo; Rosati, Stefano; Rosbach, Kilian; Rose, Anthony; Rose, Matthew; Rosenbaum, Gabriel; Rosenberg, Eli; Rosendahl, Peter Lundgaard; Rosenthal, Oliver; Rosselet, Laurent; Rossetti, Valerio; Rossi, Elvira; Rossi, Leonardo Paolo; Rotaru, Marina; Roth, Itamar; Rothberg, Joseph; Rousseau, David; Royon, Christophe; Rozanov, Alexandre; Rozen, Yoram; Ruan, Xifeng; Rubbo, Francesco; Rubinskiy, Igor; Ruckstuhl, Nicole; Rud, Viacheslav; Rudolph, Christian; Rudolph, Gerald; Rühr, Frederik; Ruiz-Martinez, Aranzazu; Rumyantsev, Leonid; Rurikova, Zuzana; Rusakovich, Nikolai; Ruschke, Alexander; Rutherfoord, John; Ruzicka, Pavel; Ryabov, Yury; Rybar, Martin; Rybkin, Grigori; Ryder, Nick; Saavedra, Aldo; Sadeh, Iftach; Sadrozinski, Hartmut; Sadykov, Renat; Safai Tehrani, Francesco; Sakamoto, Hiroshi; Salamanna, Giuseppe; Salamon, Andrea; Saleem, Muhammad; Salek, David; Salihagic, Denis; Salnikov, Andrei; Salt, José; Salvachua Ferrando, Belén; Salvatore, Daniela; Salvatore, Pasquale Fabrizio; Salvucci, Antonio; Salzburger, Andreas; Sampsonidis, Dimitrios; Samset, Björn Hallvard; Sanchez, Arturo; Sanchez Martinez, Victoria; Sandaker, Heidi; Sander, Heinz Georg; Sanders, Michiel; Sandhoff, Marisa; Sandoval, Tanya; Sandoval, Carlos; Sandstroem, Rikard; Sankey, Dave; Sansoni, Andrea; Santamarina Rios, Cibran; Santoni, Claudio; Santonico, Rinaldo; Santos, Helena; Santoyo Castillo, Itzebelt; Saraiva, João; Sarangi, Tapas; Sarkisyan-Grinbaum, Edward; Sarrazin, Bjorn; Sarri, Francesca; Sartisohn, Georg; Sasaki, Osamu; Sasaki, Yuichi; Sasao, Noboru; Satsounkevitch, Igor; Sauvage, Gilles; Sauvan, Emmanuel; Sauvan, Jean-Baptiste; Savard, Pierre; Savinov, Vladimir; Savu, Dan Octavian; Sawyer, Lee; Saxon, David; Saxon, James; Sbarra, Carla; Sbrizzi, Antonio; Scannicchio, Diana; Scarcella, Mark; Schaarschmidt, Jana; Schacht, Peter; Schaefer, Douglas; Schäfer, Uli; Schaelicke, Andreas; Schaepe, Steffen; Schaetzel, Sebastian; Schaffer, Arthur; Schaile, Dorothee; Schamberger, R. Dean; Schamov, Andrey; Scharf, Veit; Schegelsky, Valery; Scheirich, Daniel; Schernau, Michael; Scherzer, Max; Schiavi, Carlo; Schieck, Jochen; Schioppa, Marco; Schlenker, Stefan; Schmidt, Evelyn; Schmieden, Kristof; Schmitt, Christian; Schmitt, Sebastian; Schneider, Basil; Schnoor, Ulrike; Schoeffel, Laurent; Schoening, Andre; Schorlemmer, Andre Lukas; Schott, Matthias; Schouten, Doug; Schovancova, Jaroslava; Schram, Malachi; Schroeder, Christian; Schroer, Nicolai; Schultens, Martin Johannes; Schultes, Joachim; Schultz-Coulon, Hans-Christian; Schulz, Holger; Schumacher, Markus; Schumm, Bruce; Schune, Philippe; Schwartzman, Ariel; Schwegler, Philipp; Schwemling, Philippe; Schwienhorst, Reinhard; Schwierz, Rainer; Schwindling, Jerome; Schwindt, Thomas; Schwoerer, Maud; Sciacca, Gianfranco; Sciolla, Gabriella; Scott, Bill; Searcy, Jacob; Sedov, George; Sedykh, Evgeny; Seidel, Sally; Seiden, Abraham; Seifert, Frank; Seixas, José; Sekhniaidze, Givi; Sekula, Stephen; Selbach, Karoline Elfriede; Seliverstov, Dmitry; Sellden, Bjoern; Sellers, Graham; Seman, Michal; Semprini-Cesari, Nicola; Serfon, Cedric; Serin, Laurent; Serkin, Leonid; Seuster, Rolf; Severini, Horst; Sfyrla, Anna; Shabalina, Elizaveta; Shamim, Mansoora; Shan, Lianyou; Shank, James; Shao, Qi Tao; Shapiro, Marjorie; Shatalov, Pavel; Shaw, Kate; Sherman, Daniel; Sherwood, Peter; Shimizu, Shima; Shimojima, Makoto; Shin, Taeksu; Shiyakova, Mariya; Shmeleva, Alevtina; Shochet, Mel; Short, Daniel; Shrestha, Suyog; Shulga, Evgeny; Shupe, Michael; Sicho, Petr; Sidoti, Antonio; Siegert, Frank; Sijacki, Djordje; Silbert, Ohad; Silva, José; Silver, Yiftah; Silverstein, Daniel; Silverstein, Samuel; Simak, Vladislav; Simard, Olivier; Simic, Ljiljana; Simion, Stefan; Simioni, Eduard; Simmons, Brinick; Simoniello, Rosa; Simonyan, Margar; Sinervo, Pekka; Sinev, Nikolai; Sipica, Valentin; Siragusa, Giovanni; Sircar, Anirvan; Sisakyan, Alexei; Sivoklokov, Serguei; Sjölin, Jörgen; Sjursen, Therese; Skinnari, Louise Anastasia; Skottowe, Hugh Philip; Skovpen, Kirill; Skubic, Patrick; Slater, Mark; Slavicek, Tomas; Sliwa, Krzysztof; Smakhtin, Vladimir; Smart, Ben; Smestad, Lillian; Smirnov, Sergei; Smirnov, Yury; Smirnova, Lidia; Smirnova, Oxana; Smith, Ben Campbell; Smith, Douglas; Smith, Kenway; Smizanska, Maria; Smolek, Karel; Snesarev, Andrei; Snow, Steve; Snow, Joel; Snyder, Scott; Sobie, Randall; Sodomka, Jaromir; Soffer, Abner; Solans, Carlos; Solar, Michael; Solc, Jaroslav; Soldatov, Evgeny; Soldevila, Urmila; Solfaroli Camillocci, Elena; Solodkov, Alexander; Solovyanov, Oleg; Solovyev, Victor; Soni, Nitesh; Sood, Alexander; Sopko, Vit; Sopko, Bruno; Sosebee, Mark; Soualah, Rachik; Soueid, Paul; Soukharev, Andrey; Spagnolo, Stefania; Spanò, Francesco; Spighi, Roberto; Spigo, Giancarlo; Spiwoks, Ralf; Spousta, Martin; Spreitzer, Teresa; Spurlock, Barry; St Denis, Richard Dante; Stahlman, Jonathan; Stamen, Rainer; Stanecka, Ewa; Stanek, Robert; Stanescu, Cristian; Stanescu-Bellu, Madalina; Stanitzki, Marcel Michael; Stapnes, Steinar; Starchenko, Evgeny; Stark, Jan; Staroba, Pavel; Starovoitov, Pavel; Staszewski, Rafal; Staude, Arnold; Stavina, Pavel; Steele, Genevieve; Steinbach, Peter; Steinberg, Peter; Stekl, Ivan; Stelzer, Bernd; Stelzer, Harald Joerg; Stelzer-Chilton, Oliver; Stenzel, Hasko; Stern, Sebastian; Stewart, Graeme; Stillings, Jan Andre; Stockton, Mark; Stoerig, Kathrin; Stoicea, Gabriel; Stonjek, Stefan; Strachota, Pavel; Stradling, Alden; Straessner, Arno; Strandberg, Jonas; Strandberg, Sara; Strandlie, Are; Strang, Michael; Strauss, Emanuel; Strauss, Michael; Strizenec, Pavol; Ströhmer, Raimund; Strom, David; Strong, John; Stroynowski, Ryszard; Stugu, Bjarne; Stumer, Iuliu; Stupak, John; Sturm, Philipp; Styles, Nicholas Adam; Soh, Dart-yin; Su, Dong; Subramania, Halasya Siva; Subramaniam, Rajivalochan; Succurro, Antonella; Sugaya, Yorihito; Suhr, Chad; Suk, Michal; Sulin, Vladimir; Sultansoy, Saleh; Sumida, Toshi; Sun, Xiaohu; Sundermann, Jan Erik; Suruliz, Kerim; Susinno, Giancarlo; Sutton, Mark; Suzuki, Yu; Suzuki, Yuta; Svatos, Michal; Swedish, Stephen; Sykora, Ivan; Sykora, Tomas; Sánchez, Javier; Ta, Duc; Tackmann, Kerstin; Taffard, Anyes; Tafirout, Reda; Taiblum, Nimrod; Takahashi, Yuta; Takai, Helio; Takashima, Ryuichi; Takeda, Hiroshi; Takeshita, Tohru; Takubo, Yosuke; Talby, Mossadek; Talyshev, Alexey; Tamsett, Matthew; Tan, Kong Guan; Tanaka, Junichi; Tanaka, Reisaburo; Tanaka, Satoshi; Tanaka, Shuji; Tanasijczuk, Andres Jorge; Tani, Kazutoshi; Tannoury, Nancy; Tapprogge, Stefan; Tardif, Dominique; Tarem, Shlomit; Tarrade, Fabien; Tartarelli, Giuseppe Francesco; Tas, Petr; Tasevsky, Marek; Tassi, Enrico; Tayalati, Yahya; Taylor, Christopher; Taylor, Frank; Taylor, Geoffrey; Taylor, Wendy; Teinturier, Marthe; Teischinger, Florian Alfred; Teixeira Dias Castanheira, Matilde; Teixeira-Dias, Pedro; Temming, Kim Katrin; Ten Kate, Herman; Teng, Ping-Kun; Terada, Susumu; Terashi, Koji; Terron, Juan; Testa, Marianna; Teuscher, Richard; Therhaag, Jan; Theveneaux-Pelzer, Timothée; Thoma, Sascha; Thomas, Juergen; Thompson, Emily; Thompson, Paul; Thompson, Peter; Thompson, Stan; Thomsen, Lotte Ansgaard; Thomson, Evelyn; Thomson, Mark; Thong, Wai Meng; Thun, Rudolf; Tian, Feng; Tibbetts, Mark James; Tic, Tomáš; Tikhomirov, Vladimir; Tikhonov, Yury; Timoshenko, Sergey; Tiouchichine, Elodie; Tipton, Paul; Tisserant, Sylvain; Todorov, Theodore; Todorova-Nova, Sharka; Toggerson, Brokk; Tojo, Junji; Tokár, Stanislav; Tokushuku, Katsuo; Tollefson, Kirsten; Tomoto, Makoto; Tompkins, Lauren; Toms, Konstantin; Tonoyan, Arshak; Topfel, Cyril; Topilin, Nikolai; Torrence, Eric; Torres, Heberth; Torró Pastor, Emma; Toth, Jozsef; Touchard, Francois; Tovey, Daniel; Trefzger, Thomas; Tremblet, Louis; Tricoli, Alesandro; Trigger, Isabel Marian; Trincaz-Duvoid, Sophie; Tripiana, Martin; Triplett, Nathan; Trischuk, William; Trocmé, Benjamin; Troncon, Clara; Trottier-McDonald, Michel; True, Patrick; Trzebinski, Maciej; Trzupek, Adam; Tsarouchas, Charilaos; Tseng, Jeffrey; Tsiakiris, Menelaos; Tsiareshka, Pavel; Tsionou, Dimitra; Tsipolitis, Georgios; Tsiskaridze, Shota; Tsiskaridze, Vakhtang; Tskhadadze, Edisher; Tsukerman, Ilya; Tsulaia, Vakhtang; Tsung, Jieh-Wen; Tsuno, Soshi; Tsybychev, Dmitri; Tua, Alan; Tudorache, Alexandra; Tudorache, Valentina; Tuggle, Joseph; Turala, Michal; Turecek, Daniel; Turk Cakir, Ilkay; Turlay, Emmanuel; Turra, Ruggero; Tuts, Michael; Tykhonov, Andrii; Tylmad, Maja; Tyndel, Mike; Tzanakos, George; Uchida, Kirika; Ueda, Ikuo; Ueno, Ryuichi; Ughetto, Michael; Ugland, Maren; Uhlenbrock, Mathias; Uhrmacher, Michael; Ukegawa, Fumihiko; Unal, Guillaume; Undrus, Alexander; Unel, Gokhan; Unno, Yoshinobu; Urbaniec, Dustin; Urquijo, Phillip; Usai, Giulio; Uslenghi, Massimiliano; Vacavant, Laurent; Vacek, Vaclav; Vachon, Brigitte; Vahsen, Sven; Valenta, Jan; Valentinetti, Sara; Valero, Alberto; Valkar, Stefan; Valladolid Gallego, Eva; Vallecorsa, Sofia; Valls Ferrer, Juan Antonio; Van Berg, Richard; Van Der Deijl, Pieter; van der Geer, Rogier; van der Graaf, Harry; Van Der Leeuw, Robin; van der Poel, Egge; van der Ster, Daniel; van Eldik, Niels; van Gemmeren, Peter; Van Nieuwkoop, Jacobus; van Vulpen, Ivo; Vanadia, Marco; Vandelli, Wainer; Vaniachine, Alexandre; Vankov, Peter; Vannucci, Francois; Vari, Riccardo; Varnes, Erich; Varol, Tulin; Varouchas, Dimitris; Vartapetian, Armen; Varvell, Kevin; Vassilakopoulos, Vassilios; Vazeille, Francois; Vazquez Schroeder, Tamara; Vegni, Guido; Veillet, Jean-Jacques; Veloso, Filipe; Veness, Raymond; Veneziano, Stefano; Ventura, Andrea; Ventura, Daniel; Venturi, Manuela; Venturi, Nicola; Vercesi, Valerio; Verducci, Monica; Verkerke, Wouter; Vermeulen, Jos; Vest, Anja; Vetterli, Michel; Vichou, Irene; Vickey, Trevor; Vickey Boeriu, Oana Elena; Viehhauser, Georg; Viel, Simon; Villa, Mauro; Villaplana Perez, Miguel; Vilucchi, Elisabetta; Vincter, Manuella; Vinek, Elisabeth; Vinogradov, Vladimir; Virchaux, Marc; Virzi, Joseph; Vitells, Ofer; Viti, Michele; Vivarelli, Iacopo; Vives Vaque, Francesc; Vlachos, Sotirios; Vladoiu, Dan; Vlasak, Michal; Vogel, Adrian; Vokac, Petr; Volpi, Guido; Volpi, Matteo; Volpini, Giovanni; von der Schmitt, Hans; von Radziewski, Holger; von Toerne, Eckhard; Vorobel, Vit; Vorwerk, Volker; Vos, Marcel; Voss, Rudiger; Vossebeld, Joost; Vranjes, Nenad; Vranjes Milosavljevic, Marija; Vrba, Vaclav; Vreeswijk, Marcel; Vu Anh, Tuan; Vuillermet, Raphael; Vukotic, Ilija; Wagner, Wolfgang; Wagner, Peter; Wahlen, Helmut; Wahrmund, Sebastian; Wakabayashi, Jun; Walch, Shannon; Walder, James; Walker, Rodney; Walkowiak, Wolfgang; Wall, Richard; Waller, Peter; Walsh, Brian; Wang, Chiho; Wang, Haichen; Wang, Hulin; Wang, Jike; Wang, Jin; Wang, Rui; Wang, Song-Ming; Wang, Tan; Warburton, Andreas; Ward, Patricia; Wardrope, David Robert; Warsinsky, Markus; Washbrook, Andrew; Wasicki, Christoph; Watanabe, Ippei; Watkins, Peter; Watson, Alan; Watson, Ian; Watson, Miriam; Watts, Gordon; Watts, Stephen; Waugh, Anthony; Waugh, Ben; Weber, Michele; Webster, Jordan S; Weidberg, Anthony; Weigell, Philipp; Weingarten, Jens; Weiser, Christian; Wells, Phillippa; Wenaus, Torre; Wendland, Dennis; Weng, Zhili; Wengler, Thorsten; Wenig, Siegfried; Wermes, Norbert; Werner, Matthias; Werner, Per; Werth, Michael; Wessels, Martin; Wetter, Jeffrey; Weydert, Carole; Whalen, Kathleen; White, Andrew; White, Martin; White, Sebastian; Whitehead, Samuel Robert; Whiteson, Daniel; Whittington, Denver; Wicke, Daniel; Wickens, Fred; Wiedenmann, Werner; Wielers, Monika; Wienemann, Peter; Wiglesworth, Craig; Wiik-Fuchs, Liv Antje Mari; Wijeratne, Peter Alexander; Wildauer, Andreas; Wildt, Martin Andre; Wilhelm, Ivan; Wilkens, Henric George; Will, Jonas Zacharias; Williams, Eric; Williams, Hugh; Willis, William; Willocq, Stephane; Wilson, John; Wilson, Michael Galante; Wilson, Alan; Wingerter-Seez, Isabelle; Winkelmann, Stefan; Winklmeier, Frank; Wittgen, Matthias; Wollstadt, Simon Jakob; Wolter, Marcin Wladyslaw; Wolters, Helmut; Wong, Wei-Cheng; Wooden, Gemma; Wosiek, Barbara; Wotschack, Jorg; Woudstra, Martin; Wozniak, Krzysztof; Wraight, Kenneth; Wright, Michael; Wrona, Bozydar; Wu, Sau Lan; Wu, Xin; Wu, Yusheng; Wulf, Evan; Wynne, Benjamin; Xella, Stefania; Xiao, Meng; Xie, Song; Xu, Chao; Xu, Da; Xu, Lailin; Yabsley, Bruce; Yacoob, Sahal; Yamada, Miho; Yamaguchi, Hiroshi; Yamamoto, Akira; Yamamoto, Kyoko; Yamamoto, Shimpei; Yamamura, Taiki; Yamanaka, Takashi; Yamazaki, Takayuki; Yamazaki, Yuji; Yan, Zhen; Yang, Haijun; Yang, Un-Ki; Yang, Yi; Yang, Zhaoyu; Yanush, Serguei; Yao, Liwen; Yasu, Yoshiji; Yatsenko, Elena; Ye, Jingbo; Ye, Shuwei; Yen, Andy L; Yilmaz, Metin; Yoosoofmiya, Reza; Yorita, Kohei; Yoshida, Rikutaro; Yoshihara, Keisuke; Young, Charles; Young, Christopher John; Youssef, Saul; Yu, Dantong; Yu, David Ren-Hwa; Yu, Jaehoon; Yu, Jie; Yuan, Li; Yurkewicz, Adam; Zabinski, Bartlomiej; Zaidan, Remi; Zaitsev, Alexander; Zanello, Lucia; Zanzi, Daniele; Zaytsev, Alexander; Zeitnitz, Christian; Zeman, Martin; Zemla, Andrzej; Zenin, Oleg; Ženiš, Tibor; Zinonos, Zinonas; Zerwas, Dirk; Zevi della Porta, Giovanni; Zhang, Dongliang; Zhang, Huaqiao; Zhang, Jinlong; Zhang, Xueyao; Zhang, Zhiqing; Zhao, Long; Zhao, Zhengguo; Zhemchugov, Alexey; Zhong, Jiahang; Zhou, Bing; Zhou, Ning; Zhou, Yue; Zhu, Cheng Guang; Zhu, Hongbo; Zhu, Junjie; Zhu, Yingchun; Zhuang, Xuai; Zhuravlov, Vadym; Zibell, Andre; Zieminska, Daria; Zimin, Nikolai; Zimmermann, Robert; Zimmermann, Simone; Zimmermann, Stephanie; Ziolkowski, Michael; Zitoun, Robert; Živković, Lidija; Zmouchko, Viatcheslav; Zobernig, Georg; Zoccoli, Antonio; zur Nedden, Martin; Zutshi, Vishnu; Zwalinski, Lukasz

2013-03-04

Using 1.8 fb-1 of pp collisions at a center-of-mass energy of 7 TeV recorded by the ATLAS detector at the Large Hadron Collider, we present measurements of the production cross sections of Upsilon(1S,2S,3S) mesons. Upsilon mesons are reconstructed using the di-muon decay mode. Total production cross sections for p_T<70 GeV and in the rapidity interval |$y^{\\Upsilon}$|<2.25 are measured to be 8.01+-0.02+-0.36+-0.31 nb, 2.05+-0.01+-0.12+-0.08 nb, 0.92+-0.01+-0.07+-0.04 nb respectively, with uncertainties separated into statistical, systematic, and luminosity measurement effects. In addition, differential cross section times di-muon branching fractions for Upsilon(1S), Upsilon(2S), and Upsilon(3S) as a function of Upsilon transverse momentum p_T and rapidity are presented. These cross sections are obtained assuming unpolarized production. If the production polarization is fully transverse or longitudinal with no azimuthal dependence in the helicity frame the cross section may vary by approximately +-20%. I...

Integral process of obtaining glycerol as a by-product of biodiesel production from castor oil

Directory of Open Access Journals (Sweden)

Leonel Romero

2012-12-01

Full Text Available The biodiesel is obtained from about 10 years ago in Europe, and now that it has taken hold as fuel for diesel engines, it is expected a clear increase in the production of this class of fuels in a the near future. The biodiesel is derived from the transesterification reaction of castor oil with methanol, which is the main by-product the glycerol with an approximate content of 10%. Besides catalyst residuals, soaps, methanol traces, mono and diglycerides in small percentages are presented. This study proposes the separation, purification and characterization of the glycerol obtained from the transesterificación reaction of the castor oil, in order to be able to market it in the national or international market, so that it fulfills the standards of quality, which means getting a pure glycerol and the appropriate physico-chemical characteristics and techniques. The glycerin-methyl esters separation is carried out by decantation being obtained a percentage of around 70% glycerol. This percentage is subsequently increased through the purification process, using hydrochloric acid. Glycerol characterization was carried out by physicochemical and organoleptic tests. The purification process allowed us to obtain a glycerol with a percentage of purity close to 98%. It was also tested by comparison with theoretical data that remnants influenced in the physiochemical properties

Application of the Stochastic Production Frontier to the Measurement ...

African Journals Online (AJOL)

Given the existing technology of the fish producers, proper management that bears in mind the use of improved fish species, maintenance of number of ponds and increased education of the fish producers on current techniques of production are policy measures that could help improve on the technical efficiency of fish ...

Evaluation of Columbia, USMARC-Composite, Suffolk, and Texel rams as terminal sires in an extensive rangeland production system: VIII. Quality measures of lamb longissimus dorsi.

Science.gov (United States)

Mousel, M R; Notter, D R; Leeds, T D; Zerby, H N; Moeller, S J; Taylor, J B; Lewis, G S

2014-07-01

Quality measures of lamb longissimus dorsi were evaluated in 514 crossbred wether lambs to assess sire breed differences. Wethers were produced over 3 yr from single-sire matings of 22 Columbia, 22 U.S. Meat Animal Research Center (USMARC)-Composite (Composite), 21 Suffolk, and 17 Texel rams to adult Rambouillet ewes. Lambs were reared to weaning in an extensive western rangeland production system and finished in a feedlot on a high-energy finishing diet. One of three harvest groups were randomly assigned to each lamb, and lambs were transported to The Ohio State University abattoir when the mean BW of wethers remaining in the feedlot reached 54.4, 61.2, or 68.0 kg. After harvest, subjective lean quality scores were assigned and LM pH (immediately after and 24 h after harvest), color (quantified as Minolta L*, a*, and b*), intramuscular fat (IMF), cooking loss percentage, and Warner-Bratzler shear force (WBSF) were determined. Statistical models included fixed effects of sire breed, year of birth, and harvest group and random effects of sire (nested within sire breed and year) and maternal grandsire. Year and harvest group were significant (P 0.28). At comparable numbers of days on feed, Texel-sired wethers had the greatest (more desirable; P lambs were intermediate and Columbia-sired lambs had the lowest (less desirable). Minolta L* values were greater (P lambs, although this difference is not visually discernible by humans. No significant (P > 0.05) sire breed effects were detected for LM pH at or 24 h after harvest, Minolta a* and b*, IMF, percentage of cooking loss, and WBSF at comparable numbers of days on feed. At comparable chilled carcass weight, significant (P lambs had greater scores than Columbia- and Suffolk-sired lambs, but Composite-sired lambs did not differ from lambs sired by the other sire breeds. Sire breed effects were not detected (P > 0.15) for LM pH at or 24 h after harvest, Minolta L*, a*, and b*, cooking loss percentage, IMF, and WBSF at

Marathon performance in relation to body fat percentage and training indices in recreational male runners

Directory of Open Access Journals (Sweden)

Tanda G

2013-05-01

Full Text Available Giovanni Tanda,1 Beat Knechtle2,31DIME, Università degli Studi di Genova, Genova, Italy; 2Gesundheitszentrum St Gallen, St Gallen, Switzerland; 3Institute of General Practice and Health Services Research, University of Zurich, Zurich, SwitzerlandBackground: The purpose of this study was to investigate the effect of anthropometric characteristics and training indices on marathon race times in recreational male marathoners.Methods: Training and anthropometric characteristics were collected for a large cohort of recreational male runners (n = 126 participating in the Basel marathon in Switzerland between 2010 and 2011.Results: Among the parameters investigated, marathon performance time was found to be affected by mean running speed and the mean weekly distance run during the training period prior to the race and by body fat percentage. The effect of body fat percentage became significant as it exceeded a certain limiting value; for a relatively low body fat percentage, marathon performance time correlated only with training indices.Conclusion: Marathon race time may be predicted (r = 0.81 for recreational male runners by the following equation: marathon race time (minutes = 11.03 + 98.46 exp(−0.0053 mean weekly training distance [km/week] + 0.387 mean training pace (sec/km + 0.1 exp(0.23 body fat percentage [%]. The marathon race time results were valid over a range of 165–266 minutes.Keywords: endurance, exercise, anthropometry

The influence of Palm Kernel Cake and Rice Bran Fermentation Product Mixture to the Broiler Carcass Quality

Directory of Open Access Journals (Sweden)

Yadi Priabudiman

2011-07-01

Full Text Available The purpose of this research was to study the effect of the use of palm kernel cake (PKC and rice bran (RB fermentation products mixture to the percentage of broiler carcass weight pieces. Research using completely randomized design (CRD with treatments of the fermentation product usage rate of   0% (P0, 10% (P1, 20% (P2, 30% (P3 and 40% (P4 of the total ration of 4replications.  Variables measured were percentage of carcass weight ratio cut    pieces  of carcass weight (carcass front, rear carcass, breast meat, wings, back, and thigh with carcass weight multiplied by 100%. The results showed that the percentage of carcass weight piece front and rear carcass was shown at P3.

Measurement of the Cross Section of W-boson pair production at LEP

CERN Document Server

Achard, P.; Aguilar-Benitez, M.; Alcaraz, J.; Alemanni, G.; Allaby, J.; Aloisio, A.; Alviggi, M.G.; Anderhub, H.; Andreev, Valery P.; Anselmo, F.; Arefev, A.; Azemoon, T.; Aziz, T.; Bagnaia, P.; Bajo, A.; Baksay, G.; Baksay, L.; Baldew, S.V.; Banerjee, S.; Banerjee, Sw.; Barczyk, A.; Barillere, R.; Bartalini, P.; Basile, M.; Batalova, N.; Battiston, R.; Bay, A.; Becattini, F.; Becker, U.; Behner, F.; Bellucci, L.; Berbeco, R.; Berdugo, J.; Berges, P.; Bertucci, B.; Betev, B.L.; Biasini, M.; Biglietti, M.; Biland, A.; Blaising, J.J.; Blyth, S.C.; Bobbink, G.J.; Bohm, A.; Boldizsar, L.; Borgia, B.; Bottai, S.; Bourilkov, D.; Bourquin, M.; Braccini, S.; Branson, J.G.; Brochu, F.; Burger, J.D.; Burger, W.J.; Button, A.; Cai, X.D.; Capell, M.; Cara Romeo, G.; Carlino, G.; Cartacci, A.; Casaus, J.; Cavallari, F.; Cavallo, N.; Cecchi, C.; Cerrada, M.; Chamizo, M.; Chang, Y.H.; Chemarin, M.; Chen, A.; Chen, G.; Chen, G.M.; Chen, H.F.; Chen, H.S.; Chiefari, G.; Cifarelli, L.; Cindolo, F.; Clare, I.; Clare, R.; Coignet, G.; Colino, N.; Costantini, S.; de la Cruz, B.; Cucciarelli, S.; van Dalen, J.A.; de Asmundis, R.; Deglon, P.; Debreczeni, J.; Degre, A.; Dehmelt, K.; Deiters, K.; della Volpe, D.; Delmeire, E.; Denes, P.; DeNotaristefani, F.; De Salvo, A.; Diemoz, M.; Dierckxsens, M.; van Dierendonck, D.; Dionisi, C.; Dittmar, M.; Doria, A.; Dova, M.T.; Duchesneau, D.; Duda, M.; Echenard, B.; Eline, A.; El Hage, A.; El Mamouni, H.; Engler, A.; Eppling, F.J.; Extermann, P.; Falagan, M.A.; Falciano, S.; Favara, A.; Fay, J.; Fedin, O.; Felcini, M.; Ferguson, T.; Fesefeldt, H.; Fiandrini, E.; Field, J.H.; Filthaut, F.; Fisher, P.H.; Fisher, W.; Fisk, I.; Forconi, G.; Freudenreich, K.; Furetta, C.; Galaktionov, Iouri; Ganguli, S.N.; Garcia-Abia, Pablo; Gataullin, M.; Gentile, S.; Giagu, S.; Gong, Z.F.; Grenier, Gerald Jean; Grimm, O.; Gruenewald, M.W.; Guida, M.; Gupta, V.K.; Gurtu, A.; Gutay, L.J.; Haas, D.; Hatzifotiadou, D.; Hebbeker, T.; Herve, Alain; Hirschfelder, J.; Hofer, H.; Hohlmann, M.; Holzner, G.; Hou, S.R.; Hu, Y.; Jin, B.N.; Jones, Lawrence W.; de Jong, P.; Josa-Mutuberria, I.; Kaur, M.; Kienzle-Focacci, M.N.; Kim, J.K.; Kirkby, Jasper; Kittel, W.; Klimentov, A.; Konig, A.C.; Kopal, M.; Koutsenko, V.; Kraber, M.; Kraemer, R.W.; Kruger, A.; Kunin, A.; Ladron de Guevara, P.; Laktineh, I.; Landi, G.; Lebeau, M.; Lebedev, A.; Lebrun, P.; Lecomte, P.; Lecoq, P.; Le Coultre, P.; Le Goff, J.M.; Leiste, R.; Levtchenko, M.; Levtchenko, P.; Li, C.; Likhoded, S.; Lin, C.H.; Lin, W.T.; Linde, F.L.; Lista, L.; Liu, Z.A.; Lohmann, W.; Longo, E.; Lu, Y.S.; Luci, C.; Luminari, L.; Lustermann, W.; Ma, W.G.; Malgeri, L.; Malinin, A.; Mana, C.; Mans, J.; Martin, J.P.; Marzano, F.; Mazumdar, K.; McNeil, R.R.; Mele, S.; Merola, L.; Meschini, M.; Metzger, W.J.; Mihul, A.; Milcent, H.; Mirabelli, G.; Mnich, J.; Mohanty, G.B.; Moulik, T.; Muanza, G.S.; Muijs, A.J.M.; Musicar, B.; Musy, M.; Nagy, S.; Nandakumar, R.; Natale, S.; Napolitano, M.; Nessi-Tedaldi, F.; Newman, H.; Nisati, A.; Novak, T.; Kluge, Hannelies; Ofierzynski, R.; Organtini, G.; Pal, I.; Palomares, C.; Paolucci, P.; Paramatti, R.; Passaleva, G.; Patricelli, S.; Paul, Thomas Cantzon; Pauluzzi, M.; Paus, C.; Pauss, F.; Pedace, M.; Pensotti, S.; Perret-Gallix, D.; Petersen, B.; Piccolo, D.; Pierella, F.; Pioppi, M.; Piroue, P.A.; Pistolesi, E.; Plyaskin, V.; Pohl, M.; Pojidaev, V.; Pothier, J.; Prokofev, D.; Quartieri, J.; Rahal-Callot, G.; Rahaman, Mohammad Azizur; Raics, P.; Raja, N.; Ramelli, R.; Rancoita, P.G.; Ranieri, R.; Raspereza, A.; Razis, P.; Ren, D.; Rescigno, M.; Reucroft, S.; Riemann, S.; Riles, Keith; Roe, B.P.; Romero, L.; Rosca, A.; Rosemann, C.; Rosenbleck, C.; Rosier-Lees, S.; Roth, Stefan; Rubio, J.A.; Ruggiero, G.; Rykaczewski, H.; Sakharov, A.; Saremi, S.; Sarkar, S.; Salicio, J.; Sanchez, E.; Schafer, C.; Schegelsky, V.; Schopper, H.; Schotanus, D.J.; Sciacca, C.; Servoli, L.; Shevchenko, S.; Shivarov, N.; Shoutko, V.; Shumilov, E.; Shvorob, A.; Son, D.; Souga, C.; Spillantini, P.; Steuer, M.; Stickland, D.P.; Stoyanov, B.; Straessner, A.; Sudhakar, K.; Sultanov, G.; Sun, L.Z.; Sushkov, S.; Suter, H.; Swain, J.D.; Szillasi, Z.; Tang, X.W.; Tarjan, P.; Tauscher, L.; Taylor, L.; Tellili, B.; Teyssier, D.; Timmermans, Charles; Ting, Samuel C.C.; Ting, S.M.; Tonwar, S.C.; Toth, J.; Tully, C.; Tung, K.L.; Ulbricht, J.; Valente, E.; Van de Walle, R.T.; Vasquez, R.; Veszpremi, V.; Vesztergombi, G.; Vetlitsky, I.; Vicinanza, D.; Viertel, G.; Villa, S.; Vivargent, M.; Vlachos, S.; Vodopianov, I.; Vogel, H.; Vogt, H.; Vorobev, I.; Vorobyov, A.A.; Wadhwa, M.; Wang, Q.; Wang, X.L.; Wang, Z.M.; Weber, A.; Weber, M.; Wilkens, H.; Wynhoff, S.; Xia, L.; Xu, Z.Z.; Yamamoto, J.; Yang, B.Z.; Yang, C.G.; Yang, H.J.; Yang, M.; Yeh, S.C.; Zalite, An.; Zalite, Yu.; Zhang, Z.P.; Zhao, J.; Zhu, G.Y.; Zhu, R.Y.; Zhuang, H.L.; Zichichi, A.; Zimmermann, B.; Zoller, M.

2004-01-01

The cross section of W-boson pair-production is measured with the L3 detector at LEP. In a data sample corresponding to a total luminosity of 629.4/pb, collected at centre-of-mass energies ranging from 189 to 209 GeV, 9834 four-fermion events with W bosons decaying into hadrons or leptons are selected. The total cross section is measured with a precision of 1.4 % and agrees with the Standard Model expectation. Assuming charged-lepton universality, the branching fraction for hadronic W-boson decays is measured to be: Br(W-->hadrons) = 67.50 +- 0.42 (stat.) +- 0.30(syst.) %, in agreement with the Standard Model. Differential cross sections as a function of the W- production angle are also measured for the semi-leptonic channels qqev and qqmv.

An integrated prediction and optimization model of biogas production system at a wastewater treatment facility.

Science.gov (United States)

Akbaş, Halil; Bilgen, Bilge; Turhan, Aykut Melih

2015-11-01

This study proposes an integrated prediction and optimization model by using multi-layer perceptron neural network and particle swarm optimization techniques. Three different objective functions are formulated. The first one is the maximization of methane percentage with single output. The second one is the maximization of biogas production with single output. The last one is the maximization of biogas quality and biogas production with two outputs. Methane percentage, carbon dioxide percentage, and other contents' percentage are used as the biogas quality criteria. Based on the formulated models and data from a wastewater treatment facility, optimal values of input variables and their corresponding maximum output values are found out for each model. It is expected that the application of the integrated prediction and optimization models increases the biogas production and biogas quality, and contributes to the quantity of electricity production at the wastewater treatment facility. Copyright © 2015 Elsevier Ltd. All rights reserved.

Measurements of Multi-boson production, Trilinear and Quartic Gauge Couplings with the ATLAS detector

International Nuclear Information System (INIS)

Becker, Maurice

2016-01-01

The ATLAS collaboration has carried a set of measurements that provide stringent tests of the electroweak sector of Standard Model, specifically on di- and multiboson production cross sections and on triple and quartic gauge-boson couplings. Such measurements include cross sections for WV (V=W or Z) production in the leptonic or semileptonic channels, the production of a W or Z boson in association with photons, a Z boson in the vector-boson fusion channel and two same-charge W bosons in the vectorboson scattering channel. These measurements are compared to (N)NLO predictions of the Standard Model and provide model-independent constraints on new physics, by setting limits on anomalous gauge-boson couplings. An analysis of the inclusive four-lepton lineshape has been carried out in the mass range from 80 to 1000 GeV, where several distinct physics processes give rise to the production of 4-lepton final state, namely the single Z resonant processes, the Higgs production at 125 GeV, as well as continuum ZZ production processes with qq-bar and gg initial states

Measurements of the top-quark mass and production cross section at CMS

CERN Multimedia

CERN. Geneva

2012-01-01

Recent measurements of the top mass at CMS are presented, based on several channels and different techniques. The results are combined giving a precise determination of the top mass. The measurements of the ttbar and single top production cross sections at 7 TeV and 8 TeV centre-of-mass energy are reviewed. The ttbar production cross section is utilized to derive a precise determination of the strong coupling constant, the single top cross section is interpreted in terms of the CKM element V_tb

Single top quark production cross-section measurements using the ATLAS and CMS detectors at the LHC

CERN Document Server

Finelli, Kevin Daniel; The ATLAS collaboration

2015-01-01

Measurements of single top quark production in proton--proton collisions at 7 and 8 TeV using the ATLAS and CMS detectors at the LHC are presented. In the leading order process, a $W$ boson is exchanged in the $t$-channel. The single top quark and anti-top total production cross-sections ratio, as well as a measurement of the inclusive and fiducial production cross-sections are presented. In addition, a measurement of the production cross-section of a single top quark in association with a $W$ boson is presented. All measurements are compared to state-of-the-art theoretical calculations and the CKM matrix element $|V_{tb}|$ is determined. The $s$-channel production is also explored and limits on exotic production in single top quark processes are discussed. This includes the search for additional $W’$ bosons and a search for monotops.

Transport of cholesterol autoxidation products in rabbit lipoproteins

International Nuclear Information System (INIS)

Peng, Shi-Kaung; Phillips, G.A.; Xia, Guang-Zhi; Morin, R.J.

1987-01-01

Radiolabeled pure [4- 14 C] cholesterol was kept at 60 0 C under air to autoxidize for 5 weeks, after which approximately 12% cholesterol oxidation products were formed. The mixture, suspended in gelatin, was given to rabbits by gastric gavage. Rabbits were killed 4, 24 and 48 h after treatment. Cholesterol and its autoxidation products were separated by thin-layer chromatography into 5 fractions and radioactivities of each fraction were measured. Percentages of each fraction of cholesterol oxidation products and cholesterol in the original mixture before administration and in the rabbit sera after administration were similar, suggesting that the rates of absorption of cholesterol oxidation products are not significantly different from that of cholesterol. Lipoproteins were fractioned by ultracentrifugation into VLDL, LDL and HDL. Radioactivities of each fraction in lipoproteins separated by thin layer chromatography showed that fractions containing cholestane-3β, 5α, 6β-triol, 7α- and 7β-hydroxycholesterol and 7-ketocholesterol were more selectively transported in VLDL, whereas most of the 25-hydroxycholesterol was present in LDL. HDL contained only minute amounts of cholesterol oxidation products. 22 refs

Measurement of inclusive production of neutral pions at high transverse momentum

International Nuclear Information System (INIS)

Ogawa, A.

1978-10-01

These are the results of a measurement of inclusive production at high transverse momentum (P perpendicular to) of neutral pions (π 0 ) from protons by beams of proton (p), kaon (K), pion (π), and antiproton (antiproton) particles. The experiment used the Fermilab M2 beam line at momenta of 100, 200 and 300 GeV/c striking a liquid hydrogen target. The data include center of mass (cm) production angles of the π 0 between 2 0 and 115 0 for P perpendicular to greater than 1 GeV/c. A pair of differential Cherenkov counters distinguished the types of beam particles. The photon (γ) detector of a lead and scintillator sandwich measured both photons from the π 0 → 2γ decay and enabled a reconstruction of the π 0 kinematics. The measurements show several remarkable features distinguishing the production rates for these different beams, including a forward peak in the cm for πp collisions and much less π 0 production at high P perpendicular to in pp than in πp or Kp collisions. A simple parametrization accurately represents the data over most of its range, showing approximate scaling in the radial variable x/sub R/ = 2P/√s (in the cm). Several parton models are compared with the data. A heuristic picture in terms of the quark constituents of the interacting hadrons accounts for many features of the data in an intuitive way. 62 references

Correlation of Leukocyte Count and Percentage of Segmented Neutrophils with Pathohistological Findings of Appendix in Children

Directory of Open Access Journals (Sweden)

Marko Baskovic

2018-01-01

Full Text Available BackgroundAppendicitis is the most common indication for an emergency operation in children's age. Although none of the laboratory values has not high sensitivity and specificity for the diagnosis of appendicitis, leukocyte count and the percentage of segmented neutrophils are most commonly used. The aim of this study was to determine whether there is a statistically significant correlation between leukocyte count and the percentage of segmented neutrophils compared to the pathohistological finding of appendix in children. Materials and MethodsWe retrospectively analyzed the data in the period from 1 January 2016 to 31 December 2016. The analysis was made on 211 patients. Spearman's correlation coefficient (rs was calculated. We determined the specificity and sensitivity of leukocyte count and the percentage of segmented neutrophils used in the calculation of Alvorado and Pediatric Appendicitis score.ResultsThe results of the research have shown that the correlation between leukocyte count and the pathohistological findings is weak (rs = 0.29, p = 3.61*10-8, while there is no correlation between the percentage of segmented neutrophils and pathohistological findings (rs = 0.18, p = 7.08 *10-5. The sensitivity of leukocyte count is 93% and the specificity is 30%, while the sensitivity to the percentage of segmented neutrophils is 71% and the specificity is 50%. ROC analysis for leukocytes shows area under the curve of 0.648, while for segmented neutrophils of 0.574.ConclusionGiven the correlation results obtained, the clinical experience of physicians will still have one of the leading roles in diagnosing acute appendicitis in children.

Workload assessment on foundry SME to enhance productivity using full time equivalent

Directory of Open Access Journals (Sweden)

Sari Amarria Dila

2018-01-01

Full Text Available Aluminium SME aims to increase the production amount by producing wok as much as 300 Units. The problem is workload analysis of operator on the wok production line in the wok foundry SME as well as the production cycle-making cycle time and analyze the workload received by the operator when producing 300 woks using the full time equivalent (FTE method. This study aims to measure the workload of each division worker in the production process with a total of 13 workers observed. This study provides a work division recommendation based on the workload that has been carefully examined. This research involves percentage of workload effectiveness and the wages of workers. In lathe division have overload workload. While the printing division, melting inspection division, packaging and transportation division including normal workload category and the percentage of good work effectiveness. The result provides recommendations for the addition of 2 workers in each division that includes the category of overload of the lathe division with the number of initial workers as many as 13 workers to 15 workers. In the last stage perform a simulation by comparing the system of prefix work and proposal. The simulation results obtained with the initial work system to get an average of 223 woks / day. Meanwhile, for the proposed work system to get an average output of 291 woks.

Measurement of the Top Quark Pair Production Cross Section in pp Collisions

International Nuclear Information System (INIS)

Gomez, B.; Hoeneisen, B.; Mooney, P.; Negret, J.P.; Davis, K.; Fein, D.; Forden, G.E.; Guida, J.A.; James, E.; Johns, K.; Markosky, L.; Nang, F.; Narayanan, A.; Rutherfoord, J.; Butler, J.M.; Fatyga, M.; Featherly, J.; Gibbard, B.; Gordon, H.; Graf, N.; Kahn, S.; Kotcher, J.; Protopopescu, S.; Rajagopalan, S.; Bantly, J.; Cullen-Vidal, D.; Cutts, D.; Guida, J.M.; Hoftun, J.S.; Nesic, D.; Partridge, R.; Grinstein, S.; Piegaia, R.; Bloom, P.; Fisyak, Y.; Glenn, S.; Grim, G.; Klopfenstein, C.; Lander, R.; Mani, S.; Drinkard, J.; Fahland, T.; Hall, R.E.; Boswell, C.; Choudhary, B.C.; Cochran, J.; Ellison, J.; Gartung, P.; Heinson, A.P.; Huehn, T.; Alves, G.A.; Carvalho, W.; Maciel, A.K.; Miranda, J.M. de; Motta, H. da.; Nicola, M.; Castilla-Valdez, H.; Gonzalez Solis, J.L.; Hernandez-Montoya, R.; Magana-Mendoza, L.; Adam, I.; Kotwal, A.V.; Bhattacharjee, M.; Abachi, S.; Ahn, S.; Baldin, B.; Bartlett, J.F.; Bhat, P.C.; Boehnlein, A.; Borcherding, F.; Brandt, A.; Bross, A.; Christenson, J.H.; Cooper, W.E.; Demarteau, M.; Denisov, D.; Diehl, H.T.; Diesburg, M.; Feher, S.; Fisk, H.E.; Flattum, E.; Fuess, S.; Genser, K.; Gerber, C.E.; Green, D.R.; Greenlee, H.; Grossman, N.; Haggerty, H.

1997-01-01

We present a measurement of the t bar t production cross section in p bar p collisions at √(s)=1.8 TeV by the D0 experiment at the Fermilab Tevatron. The measurement is based on data from an integrated luminosity of approximately 125 pb -1 accumulated during the 1992 endash 1996 collider run. We observe 39t bar t candidate events in the dilepton and lepton+jets decay channels with an expected background of 13.7±2.2 events. For a top quark mass of 173.3 GeV/c 2 , we measure the t bar t production cross section to be 5.5±1.8 pb. copyright 1997 The American Physical Society

The percentage of iNKT cells among other immune cells at various clinical stages of laryngeal cancer

Directory of Open Access Journals (Sweden)

Janusz Klatka

2016-04-01

Full Text Available Introduction: Invariant natural killer T (iNKT cells constitute a small population of immune cells that share functional and phenotypic characteristics of T lymphocytes and NK cells. Due to their involvement in specific and non-specific immune responses, iNKT cells may represent an important component of antitumor and anti-infectious immunity. Material and methods: Using flow cytometry, we analyzed the percentages of iNKT cells as well as T and B lymphocytes in peripheral blood of 50 laryngeal cancer patients at various clinical stages in comparison to healthy controls (n=15. Moreover, we determined the expression of CD25, CD69 and CD95 antigens on T lymphocytes.Results: The percentage of CD4+/CD3+ T lymphocytes in the controls was higher than in laryngeal cancer patients, both with early and late stages of the disease. The percentage of CD8+/CD3+ T lymphocytes in healthy controls was lower than in patients with early and late clinical stages of laryngeal cancer. Patients with advanced laryngeal cancer showed a lower percentage of iNKT cells and higher frequencies of T regulatory cells (Tregs than the controls. Advanced clinical stages of laryngeal cancer are associated with impaired activation of lymphocytes.Conclusions: Our study confirmed that laryngeal cancer cells exert a strong suppressor effect on the immune system of the host. This is reflected by a decrease in the percentage of iNKT cells that are capable of cancer cell elimination, and a concomitant increase in the percentage of Tregs. However, further studies are needed in order to explain the underlying mechanisms of immunosuppression and understand interactions between immune and cancer cells.

Fission product yield measurements using monoenergetic photon beams

Science.gov (United States)

Krishichayan; Bhike, M.; Tonchev, A. P.; Tornow, W.

2017-09-01

Measurements of fission products yields (FPYs) are an important source of information on the fission process. During the past couple of years, a TUNL-LANL-LLNL collaboration has provided data on the FPYs from quasi monoenergetic neutron-induced fission on 235U, 238U, and 239Pu and has revealed an unexpected energy dependence of both asymmetric fission fragments at energies below 4 MeV. This peculiar FPY energy dependence was more pronounced in neutron-induced fission of 239Pu. In an effort to understand and compare the effect of the incoming probe on the FPY distribution, we have carried out monoenergetic photon-induced fission experiments on the same 235U, 238U, and 239Pu targets. Monoenergetic photon beams of Eγ = 13.0 MeV were provided by the HIγS facility, the world's most intense γ-ray source. In order to determine the total number of fission events, a dual-fission chamber was used during the irradiation. These irradiated samples were counted at the TUNL's low-background γ-ray counting facility using high efficient HPGe detectors over a period of 10 weeks. Here we report on our first ever photofission product yield measurements obtained with monoenegetic photon beams. These results are compared with neutron-induced FPY data.

Fission product yield measurements using monoenergetic photon beams

Directory of Open Access Journals (Sweden)

Krishichayan

2017-01-01

Full Text Available Measurements of fission products yields (FPYs are an important source of information on the fission process. During the past couple of years, a TUNL-LANL-LLNL collaboration has provided data on the FPYs from quasi monoenergetic neutron-induced fission on 235U, 238U, and 239Pu and has revealed an unexpected energy dependence of both asymmetric fission fragments at energies below 4 MeV. This peculiar FPY energy dependence was more pronounced in neutron-induced fission of 239Pu. In an effort to understand and compare the effect of the incoming probe on the FPY distribution, we have carried out monoenergetic photon-induced fission experiments on the same 235U, 238U, and 239Pu targets. Monoenergetic photon beams of Eγ = 13.0 MeV were provided by the HIγS facility, the world's most intense γ-ray source. In order to determine the total number of fission events, a dual-fission chamber was used during the irradiation. These irradiated samples were counted at the TUNL's low-background γ-ray counting facility using high efficient HPGe detectors over a period of 10 weeks. Here we report on our first ever photofission product yield measurements obtained with monoenegetic photon beams. These results are compared with neutron-induced FPY data.

[Evaluation of percentage of lymphocytes B with expression of co-receptors CD 40, CD22 and CD72 in hypertrophied adenoid at children with otitis media with effusion].

Science.gov (United States)

Wysocka, Jolanta; Zelazowska-Rutkowska, Beata; Ratomski, Karol; Skotnicka, Bozena; Hassmann-Poznańska, Elzbieta

2009-01-01

In hypertrophied adenoid lymphocytes B make up about 60% all lymphocytes. When the lymphocytes B come in interaction with antigens this membranes signal be passed through their receptor (BCR) to interior of cell. This signal affect modulation on gene expression, activation from which depends activation, anergy or apoptosis of lymphocyte B. Accompany BCR co-receptors regulate his functions influence stimulate or inhibitive. To the most important co-receptors stepping out on lymphocyte B belong: CD40, CD22, CD72. The aim of study was evaluation of lymphocytes B (CD19) with co-expression with CD72 and CD40 receptors in hypertrophied adenoid with at children with otitis media with effusion. An investigation was executed in hypertrophied adenoids with or without otitis media with effusion. By flow cytometry percentage of lymphocytes B with co-receptors CD 40, CD22 and CD72 in was analyzed. The percentages of CD19+CD72+ lymphocytes in the group of children with adenoid hypertrophy and exudative otitis media were lower as compared to the reference group. However, the percentages of CD19+CD22+, CD19+CD40+ in the study group was approximate to the reference group. The lower percentage of lymphocytes B CD72 + near approximate percentages of lymphocytes B CD40+ and BCD22+ at children with otitis media with effusion can be the cause of incorrect humoral response in hypertrophied adenoid at children. Maybe it is cause reduced spontaneous production IgA and IgG through lymphocyte at children with otitis media with effusion.

Measurements of absolute M-subshell X-ray production cross sections of Th by electron impact

Energy Technology Data Exchange (ETDEWEB)

Moy, A., E-mail: aurelien.moy@cea.fr [GM, CNRS, Université de Montpellier II, Place E. Bataillon, F-34095 Montpellier (France); CEA, DEN, DTEC, SGCS, LMAC, F-30207 Bagnols-sur-Cèze (France); Merlet, C. [GM, CNRS, Université de Montpellier II, Place E. Bataillon, F-34095 Montpellier (France); Dugne, O. [CEA, DEN, DTEC, SGCS, LMAC, F-30207 Bagnols-sur-Cèze (France)

2014-08-31

Highlights: • The M X-ray production cross sections of Th were measured by electron impact. • The M-subshell ionization cross sections of Th were determined from 3 to 38 keV. • Theoretical ionization cross-sections are in agreement with our experimental results. - Abstract: Measurements of absolute M-subshell X-ray production cross sections for element Th were made by electron impact for energies ranging from the ionization threshold up to 38 keV. Experimental data were obtained by measuring the X-ray intensity emitted from ultrathin Th films deposited onto self-supporting C backing films. The measurements were conducted with an electron microprobe using high-resolution wavelength dispersive spectrometers. Recorded intensities were converted into absolute X-ray production cross sections by means of atomic data and estimation of the number of primary electrons, target thickness, and detector efficiency. Our experimental X-ray production cross sections, the first to be reported for the M subshells of Th, are compared with X-ray production cross sections calculated with the mean of ionization cross sections obtained from the distorted-wave Born approximation. The Mα X-ray production cross section calculated is in excellent agreement with the measurements, allowing future use for standardless quantification in electron probe microanalysis.

Measurement of isolated photon production in deep inelastic ep scattering

Energy Technology Data Exchange (ETDEWEB)

Chekanov, S.; Derrick, M.; Magill, S. [Argonne National Lab., Argonne, IL (US)] (and others)

2009-09-15

Isolated photon production in deep inelastic ep scattering has been measured with the ZEUS detector at HERA using an integrated luminosity of 320 pb{sup -1}. Measurements were made in the isolated-photon transverse-energy and pseudo- rapidity ranges 45 GeV. Differential cross sections are presented for inclusive isolated photon production as functions of Q{sup 2}, x, E{sub T}{sup {gamma}} and {eta}{sup {gamma}}. Leading-logarithm parton-shower Monte Carlo simulations and perturbative QCD predictions give a reasonable description of the data over most of the kinematic range. (orig.)

Quality Measurement in the Wood Products Supply Chain

OpenAIRE

Espinoza, Omar Alejandro

2009-01-01

The purpose of this research is to learn about quality measurement practices in a wood products supply chain. According to the Supply Chain Management paradigm, companies no longer compete as individual entities, but as part of complex networks of suppliers and customers, linked together by flows of materials and information. Evidence suggests that a high degree of integration between supply chain members is essential to achieve superior market and financial performance. This study investigat...

Measurement of D*{sup {+-}} meson production in deep-inelastic scattering at HERA

Energy Technology Data Exchange (ETDEWEB)

Bachynska, Olena

2012-12-15

Measurements of charm production in deep-inelastic scattering at HERA at a centre-of-mass energy of 318 GeV are reported in this thesis. The analysis was performed using the data collected with the ZEUS detector during the years 2004 to 2007, corresponding to an integrated luminosity of 363 pb{sup -1}. The production of charm quarks was studied through the full kinematic reconstruction of D*{sup {+-}} mesons in the decay channel D*{sup {+-}} {yields} D{sup 0}/ anti D{sup 0}{pi}{sup {+-}}. The studies have been performed for virtualities of the exchanged photon of 5 < Q{sup 2} < 1000 GeV{sup 2} and inelasticities of 0.02 < y < 0.7. The visible D*{sup {+-}} kinematic phase space is defined by the transverse momentum range, 1.5 < p{sub T}{sup D*{sup {+-}}} < 20 GeV, and by the pseudorapidity region, vertical stroke {eta}{sup D*{sup {+-}}} vertical stroke < 1.5, of the produced D*{sup {+-}} mesons. The total visible cross section for D*{sup {+-}} production as well as single-and double-differential cross sections were measured and compared to the corresponding D*{sup {+-}} measurements performed by the H1 collaboration in the same phase-space region. The measurements are well described by NLO QCD predictions. The double-differential cross sections were exploited to extract the charm contribution to the proton structure function, F{sub 2}{sup c} {sup anti} {sup c}, expressed in terms of the reduced charm-production cross sections, {sigma}{sub red}{sup c} {sup anti} {sup c}, and compared to the predictions from HERAPDF1.5 and to the recent measurements from the H1 and ZEUS collaborations.

Supporting Hydrometeorological Research and Applications with Global Precipitation Measurement (GPM) Products and Services

Science.gov (United States)

Liu, Zhong; Ostrenga, D.; Vollmer, B.; Deshong, B.; MacRitchie, K.; Greene, M.; Kempler, S.

2016-01-01

Precipitation is an important dataset in hydrometeorological research and applications such as flood modeling, drought monitoring, etc. On February 27, 2014, the NASA Global Precipitation Measurement (GPM) mission was launched to provide the next-generation global observations of rain and snow (http:pmm.nasa.govGPM). The GPM mission consists of an international network of satellites in which a GPM Core Observatory satellite carries both active and passive microwave instruments to measure precipitation and serve as a reference standard, to unify precipitation measurements from a constellation of other research and operational satellites. The NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC) hosts and distributes GPM data. The GES DISC is home to the data archive for the GPM predecessor, the Tropical Rainfall Measuring Mission (TRMM). GPM products currently available include the following:1. Level-1 GPM Microwave Imager (GMI) and partner radiometer products2. Goddard Profiling Algorithm (GPROF) GMI and partner products (Level-2 and Level-3)3. GPM dual-frequency precipitation radar and their combined products (Level-2 and Level-3)4. Integrated Multi-satellitE Retrievals for GPM (IMERG) products (early, late, and final run)GPM data can be accessed through a number of data services (e.g., Simple Subset Wizard, OPeNDAP, WMS, WCS, ftp, etc.). A newly released Unified User Interface or UUI is a single interface to provide users seamless access to data, information and services. For example, a search for precipitation products will not only return TRMM and GPM products, but also other global precipitation products such as MERRA (Modern Era Retrospective-Analysis for Research and Applications), GLDAS (Global Land Data Assimilation Systems), etc.New features and capabilities have been recently added in GIOVANNI to allow exploring and inter-comparing GPM IMERG (Integrated Multi-satelliE Retrievals for GPM) half-hourly and monthly precipitation

LHCb; Measurement of the forward-central $b \\bar{b}$ production asymmetry

CERN Multimedia

Salustino Guimarães, V

2013-01-01

CDF and D0 collaborations results suggests that the top-quark forward-backward production asymmetry is much larger than the Standard Model (SM) predictions. Measuring the $b \\bar{b}$ asymmetry production would provide constraint on the flavor structure of any model that attempts to explain the CDF and D0 results. A measurement of the forward-central (FC) $b\\bar{b}$ production asymmetry is presented based on the LHCb data collected in 2011 at $\\sqrt{s}$ = 7 TeV corresponding to an integrated luminosity of 1.0 fb$^{-1}$ using selected events that have two identified $b$ jets, one of which is flavor tagged by one muon with high momentum. The FC asymmetry is defined as \\begin{align} A^{b \\bar{b}}_{FC}=\\frac{N(\\Delta y > 0)-N(\\Delta y 0)+N(\\Delta y 100$ GeV the expected asymmetry is about $\\cal{O}$(0.1 %) where gluon fusion which has no asymmetry is less dominant at high mass.

The ATLAS Measurements of Jet Production and the Strong Coupling Constant

CERN Document Server

Sawyer, Lee; The ATLAS collaboration

2017-01-01

The production of jets at hadron colliders provides a stringent test of perturbative QCD at the highest energies. The process can also be used to probe the gluon density in the parton distribution function of the proton. Specific topologies can be used to extract the strong coupling constant. The ATLAS collaboration has recently measured the inclusive jet production cross section in data collected at a center-of-mass energy of 8 TeV and 13 TeV. The measurements have been performed differentially in jet rapidity and transverse momentum. The collaboration also presents a first measurement of the dijet cross section at a center-of-mass energy of 13 TeV as a function of the dijet invariant mass and rapidity. The results have been compared with state-of-the-art theory predictions at NLO in pQCD, interfaced with different parton distribution functions and can be used to constrain the proton structure. We also present new measurements of transverse energy-energy correlations (TEEC) and their associated asymmetries (...

Measurement of jet production with ATLAS and extraction of $\\alpha_s$

CERN Document Server

Laycock, Paul; The ATLAS collaboration

2017-01-01

The production of jets at hadron colliders provides a stringent test of perturbative QCD at the highest energies. The process can also be used to probe the gluon density function of the proton. Specific topologies can be used to extract the strong coupling constant. The ATLAS collaboration has recently measured the inclusive jet production cross section in data collected at a center-of-mass energy of 8TeV and 13TeV. The measurements have been performed differentially in jet rapidity and transverse momentum. The collaboration also presents a first measurement of the di-jet cross section at a center-of-mass energy of 13TeV as a function of the di-jet mass and rapidity. The results have been compared with state-of-the-art theory predictions at NLO in pQCD, interfaced with different parton distribution functions and can be used to constrain the proton structure. We also present new measurements of transverse energy-energy correlations (TEEC) and their associated asymmetries (ATEEC) in multi-jet events at a center...

A neutron detector for measurement of total neutron production cross sections

Energy Technology Data Exchange (ETDEWEB)

Sekharan, K K; Laumer, H; Kern, B D; Gabbard, F [Kentucky Univ., Lexington (USA). Dept. of Physics and Astronomy

1976-03-01

A neutron detector has been constructed and calibrated for the accurate measurement of total neutron production cross sections. The detector consists of a polyethylene sphere of 60 cm diameter in which eight /sup 10/BF/sub 3/ counters have been installed radially. The relative efficiency of this detector has been determined for average neutron energies from 30 keV to 1.5 MeV by counting neutrons from /sup 7/Li(p, n)/sup 7/Be. By adjusting the radial positions of the BF/sub 3/ counters in the polyethylene sphere the efficiency for neutron detection was made nearly constant for this energy range. Measurement of absolute efficiency for the same neutron energy range has been done by counting the neutrons from /sup 51/V(p, n)/sup 51/Cr and /sup 57/Fe(p, n)/sup 57/Co reactions and determining the absolute number of residual nuclei produced during the measurement of neutron yield. Details of absolute efficiency measurements and the use of the detector for determination of neutron production cross sections are given.

Contribution of National near Real Time MODIS Forest Maximum Percentage NDVI Change Products to the U.S. ForWarn System

Science.gov (United States)

Spruce, Joseph P.; Hargrove, William; Gasser, Gerald; Smoot, James; Kuper, Philip D.

2012-01-01

This presentation reviews the development, integration, and testing of Near Real Time (NRT) MODIS forest % maximum NDVI change products resident to the USDA Forest Service (USFS) ForWarn System. ForWarn is an Early Warning System (EWS) tool for detection and tracking of regionally evident forest change, which includes the U.S. Forest Change Assessment Viewer (FCAV) (a publically available on-line geospatial data viewer for visualizing and assessing the context of this apparent forest change). NASA Stennis Space Center (SSC) is working collaboratively with the USFS, ORNL, and USGS to contribute MODIS forest change products to ForWarn. These change products compare current NDVI derived from expedited eMODIS data, to historical NDVI products derived from MODIS MOD13 data. A new suite of forest change products are computed every 8 days and posted to the ForWarn system; this includes three different forest change products computed using three different historical baselines: 1) previous year; 2) previous three years; and 3) all previous years in the MODIS record going back to 2000. The change product inputs are maximum value NDVI that are composited across a 24 day interval and refreshed every 8 days so that resulting images for the conterminous U.S. are predominantly cloud-free yet still retain temporally relevant fresh information on changes in forest canopy greenness. These forest change products are computed at the native nominal resolution of the input reflectance bands at 231.66 meters, which equates to approx 5.4 hectares or 13.3 acres per pixel. The Time Series Product Tool, a MATLAB-based software package developed at NASA SSC, is used to temporally process, fuse, reduce noise, interpolate data voids, and re-aggregate the historical NDVI into 24 day composites, and then custom MATLAB scripts are used to temporally process the eMODIS NDVIs so that they are in synch with the historical NDVI products. Prior to posting, an in-house snow mask classification product

NanoCMM : a 3D coordinate measuring machine with low moving mass for measuring small products in array with nanometer uncertainty

NARCIS (Netherlands)

Seggelen, van J.K.

2007-01-01

To measure dimensions and shape of complex three dimensional products (e.g. engines, mouldings, etc) with low uncertainty, Coordinate Measuring Machines (CMMs) are adequate instruments due to their universal applicability, easy measurement set-up and measuring flexibility. Motion software is

Analysing biodiversity and conservation knowledge products to support regional environmental assessments.

Science.gov (United States)

Brooks, Thomas M; Akçakaya, H Resit; Burgess, Neil D; Butchart, Stuart H M; Hilton-Taylor, Craig; Hoffmann, Michael; Juffe-Bignoli, Diego; Kingston, Naomi; MacSharry, Brian; Parr, Mike; Perianin, Laurence; Regan, Eugenie C; Rodrigues, Ana S L; Rondinini, Carlo; Shennan-Farpon, Yara; Young, Bruce E

2016-02-16

Two processes for regional environmental assessment are currently underway: the Global Environment Outlook (GEO) and Intergovernmental Platform on Biodiversity and Ecosystem Services (IPBES). Both face constraints of data, time, capacity, and resources. To support these assessments, we disaggregate three global knowledge products according to their regions and subregions. These products are: The IUCN Red List of Threatened Species, Key Biodiversity Areas (specifically Important Bird &Biodiversity Areas [IBAs], and Alliance for Zero Extinction [AZE] sites), and Protected Planet. We present fourteen Data citations: numbers of species occurring and percentages threatened; numbers of endemics and percentages threatened; downscaled Red List Indices for mammals, birds, and amphibians; numbers, mean sizes, and percentage coverages of IBAs and AZE sites; percentage coverage of land and sea by protected areas; and trends in percentages of IBAs and AZE sites wholly covered by protected areas. These data will inform the regional/subregional assessment chapters on the status of biodiversity, drivers of its decline, and institutional responses, and greatly facilitate comparability and consistency between the different regional/subregional assessments.

Analysing biodiversity and conservation knowledge products to support regional environmental assessments

Science.gov (United States)

Brooks, Thomas M.; Akçakaya, H. Resit; Burgess, Neil D.; Butchart, Stuart H. M.; Hilton-Taylor, Craig; Hoffmann, Michael; Juffe-Bignoli, Diego; Kingston, Naomi; Macsharry, Brian; Parr, Mike; Perianin, Laurence; Regan, Eugenie C.; Rodrigues, Ana S. L.; Rondinini, Carlo; Shennan-Farpon, Yara; Young, Bruce E.

2016-02-01

Two processes for regional environmental assessment are currently underway: the Global Environment Outlook (GEO) and Intergovernmental Platform on Biodiversity and Ecosystem Services (IPBES). Both face constraints of data, time, capacity, and resources. To support these assessments, we disaggregate three global knowledge products according to their regions and subregions. These products are: The IUCN Red List of Threatened Species, Key Biodiversity Areas (specifically Important Bird & Biodiversity Areas [IBAs], and Alliance for Zero Extinction [AZE] sites), and Protected Planet. We present fourteen Data citations: numbers of species occurring and percentages threatened; numbers of endemics and percentages threatened; downscaled Red List Indices for mammals, birds, and amphibians; numbers, mean sizes, and percentage coverages of IBAs and AZE sites; percentage coverage of land and sea by protected areas; and trends in percentages of IBAs and AZE sites wholly covered by protected areas. These data will inform the regional/subregional assessment chapters on the status of biodiversity, drivers of its decline, and institutional responses, and greatly facilitate comparability and consistency between the different regional/subregional assessments.

Analysing biodiversity and conservation knowledge products to support regional environmental assessments

Science.gov (United States)

Brooks, Thomas M.; Akçakaya, H. Resit; Burgess, Neil D.; Butchart, Stuart H.M.; Hilton-Taylor, Craig; Hoffmann, Michael; Juffe-Bignoli, Diego; Kingston, Naomi; MacSharry, Brian; Parr, Mike; Perianin, Laurence; Regan, Eugenie C.; Rodrigues, Ana S.L.; Rondinini, Carlo; Shennan-Farpon, Yara; Young, Bruce E.

2016-01-01

Two processes for regional environmental assessment are currently underway: the Global Environment Outlook (GEO) and Intergovernmental Platform on Biodiversity and Ecosystem Services (IPBES). Both face constraints of data, time, capacity, and resources. To support these assessments, we disaggregate three global knowledge products according to their regions and subregions. These products are: The IUCN Red List of Threatened Species, Key Biodiversity Areas (specifically Important Bird & Biodiversity Areas [IBAs], and Alliance for Zero Extinction [AZE] sites), and Protected Planet. We present fourteen Data citations: numbers of species occurring and percentages threatened; numbers of endemics and percentages threatened; downscaled Red List Indices for mammals, birds, and amphibians; numbers, mean sizes, and percentage coverages of IBAs and AZE sites; percentage coverage of land and sea by protected areas; and trends in percentages of IBAs and AZE sites wholly covered by protected areas. These data will inform the regional/subregional assessment chapters on the status of biodiversity, drivers of its decline, and institutional responses, and greatly facilitate comparability and consistency between the different regional/subregional assessments. PMID:26881749

Percentage and function of CD4+CD25+ regulatory T cells in patients with hyperthyroidism

Science.gov (United States)

Jiang, Ting-Jun; Cao, Xue-Liang; Luan, Sha; Cui, Wan-Hui; Qiu, Si-Huang; Wang, Yi-Chao; Zhao, Chang-Jiu; Fu, Peng

2018-01-01

The current study observed the percentage of peripheral blood (PB) CD4+CD25+ regulatory T cells (Tregs) and the influence of CD4+CD25+ Tregs on the proliferation of naïve CD4 T cells in patients with hyperthyroidism. Furthermore, preliminary discussions are presented on the action mechanism of CD4+CD25+ Tregs on hyperthyroidism attacks. The present study identified that compared with the percentage of PB CD4+CD25+ Tregs in healthy control subjects, no significant changes were observed in the percentage of PB CD4+CD25+ Tregs in patients with hyperthyroidism (P>0.05). For patients with hyperthyroidism, CD4+CD25+ Tregs exhibited significantly reduced inhibition of the proliferation of naïve CD4 T cells and decreased secretion capacity on the cytokines of CD4 T cells, compared with those of healthy control subjects (Phyperthyroidism was significantly improved (Phyperthyroidism before treatment, no significant changes were observed in the percentage of PB CD4+CD25+ Tregs in hyperthyroidism patients following treatment (P>0.05). In the patients with hyperthyroidism, following treatment, CD4+CD25+ Tregs exhibited significantly increased inhibition of the proliferation of naïve CD4 T cells and increased secretion capacity of CD4 T cell cytokines, compared with those of the patients with hyperthyroidism prior to treatment (Phyperthyroidism, and its non-proportional decrease may be closely associated with the occurrence and progression of hyperthyroidism. PMID:29207121

Hadronic resonance production measured with the ALICE detector

CERN Document Server

Dash, Ajay

2015-01-01

Hadronic resonances serve as a unique tool to study the properties of hot and dense matter pro- duced in heavy-ion collisions. These properties can be studied by measuring the ratios of hadronic resonance yields to the yields of longer-lived hadrons which can be used to investigate the re- scattering effects and the chemical freeze-out temperature. Resonance measurements in pp and p–Pb collisions provide a necessary baseline for heavy-ion data and help to disentangle the initial- state effects from medium-induced effects. The ALICE Collaboration has measured resonances such as, K ∗ (892) 0 and φ (1020) in pp, p–Pb, and Pb–Pb collisions at the LHC energies. These resonances are reconstructed via their hadronic decay channel in a wide momentum range at midrapidity. In this work, we present recent results on the transverse momentum spectra, mean transverse momentum, ratios of resonance production relative to that of long-lived hadrons.

Weight Percentage of Calcium Carbonate for 17 Equatorial Pacific Cores from Brown University

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Weight percentages of calcium carbonate in this file were compiled by J. Farrell and W. L. Prell of Brown University for 17 equatorial Pacific Ocean sediment cores....

The percentage of bacterial genes on leading versus lagging strands is influenced by multiple balancing forces

Science.gov (United States)

Mao, Xizeng; Zhang, Han; Yin, Yanbin; Xu, Ying

2012-01-01

The majority of bacterial genes are located on the leading strand, and the percentage of such genes has a large variation across different bacteria. Although some explanations have been proposed, these are at most partial explanations as they cover only small percentages of the genes and do not even consider the ones biased toward the lagging strand. We have carried out a computational study on 725 bacterial genomes, aiming to elucidate other factors that may have influenced the strand location of genes in a bacterium. Our analyses suggest that (i) genes of some functional categories such as ribosome have higher preferences to be on the leading strands; (ii) genes of some functional categories such as transcription factor have higher preferences on the lagging strands; (iii) there is a balancing force that tends to keep genes from all moving to the leading and more efficient strand and (iv) the percentage of leading-strand genes in an bacterium can be accurately explained based on the numbers of genes in the functional categories outlined in (i) and (ii), genome size and gene density, indicating that these numbers implicitly contain the information about the percentage of genes on the leading versus lagging strand in a genome. PMID:22735706

75 FR 5170 - Railroad Cost Recovery Procedures-Productivity Adjustment

Science.gov (United States)

2010-02-01

...)] Railroad Cost Recovery Procedures--Productivity Adjustment AGENCY: Surface Transportation Board, DOT. ACTION: Proposed Railroad Cost Recovery Procedures Productivity Adjustment. SUMMARY: In a decision served... railroad productivity for the 2004-2008 (5-year) averaging period. This is a decline of 0.5 of a percentage...

Brief Report: On the Concordance Percentages for Autistic Spectrum Disorder of Twins

Science.gov (United States)

Bohm, Henry V.; Stewart, Melbourne G.

2009-01-01

In the development of genetic theories of Autistic Spectrum Disorder (ASD) various characteristics of monozygotic (MZ) and dizygotic (DZ) twins are often considered. This paper sets forth a possible refinement in the interpretation of the MZ twin concordance percentages for ASD underlying such genetic theories, and, drawing the consequences from…

[EVALUATION OF THE BODY ADIPOSITY INDEX IN PREDICTING PERCENTAGE BODY FAT AMONG COLOMBIAN ADULTS].

Science.gov (United States)

González-Ruíz, Katherine; Correa-Bautista, Jorge Enrique; Ramírez-Vélez, Robinson

2015-07-01

the body adiposity index (BAI) is a new simplistic method for predicting body fat percentage (BF%) via a simple equation of hip circumference to height. Up to now, few studies have evaluated the performance of BAI in determining excess fat in Colombians. The aim of this study was to evaluate the usefulness of BAI as a predictor of body fat in among Colombian adults. cross-sectional study carried out in a sample of 204 male belonging to the education sector from Bogotá, Colombia. BAI was calculated based on the equation reported in the Bergman et al. %BF determined by tetrapolar bioimpedance analysis (BIA) was used as the reference measure of adiposity. Bland-Altman analysis was used to assess the agreement between the two methods: BAI and BIA. Associations between anthropometric measures of adiposity were investigated by Pearson correlation analysis. in general pupulation, the BAI overestimates %BF (mean difference: 12.5 % [95%CI = -4.04 % to -21.02 %]), mainly at lower levels of adiposity (mean difference: 10.2 ± 3.3). Significant correlations were found between BAI and all measurements, being the strongest-moderate correlation with %BF (r = 0.777, p Colombian adults and has a tendency to provide overestimated values as BF% decreases. Therefore, this method can be a useful tool to predict %BF in Colombian adults, although it has some limitations. Copyright AULA MEDICA EDICIONES 2014. Published by AULA MEDICA. All rights reserved.

THE TECHNOLOGY OF THE HYDROLYSİS PROCESS OF ALUMINA PRODUCTION FROM THE BAUXITES

Directory of Open Access Journals (Sweden)

Sami ŞAHİN

2000-01-01

Full Text Available The degree of growth level for many countries can be measured with their aluminum production and explatation rates. Ever though a great partion of aluminum hydroxide is turned into alumina still it has great merit. On the other hand, a large percentage of alumina is used in the aluminum production. The operation in the decomposition processes is referred to succinetly as hydrolysis process. Aluminum hydroxide is obtained from the aluminate solution. This production is named as hydrate and settled down which is proceded by filtration and finally sent to the calcination unit. Hydrolysis process is one of the most important stages in the production of alumina from bauxites. The ocovinence of hydrolysis reaction in a desirable manner is dependent on the factors that effect the reaction rate.

Product Stigmaticity : Understanding, Measuring and Managing Product-Related Stigma

NARCIS (Netherlands)

Vaes, K.

2014-01-01

Stigma-free Product Design. Many of the products intended to relieve us from discomforting or unsafe situations and many medical and assistive devices are experienced as unpleasant and uncomfortable. On top of their discomfort, product users may also experience social unease from the people around

Measuring culture outside the head: a meta-analysis of individualism-collectivism in cultural products.

Science.gov (United States)

Morling, Beth; Lamoreaux, Marika

2008-08-01

Although cultural psychology is the study of how sociocultural environments and psychological processes coconstruct each other, the field has traditionally emphasized measures of the psychological over the sociocultural. Here, the authors call attention to a growing trend of measuring the sociocultural environment. They present a quantitative review of studies that measure cultural differences in "cultural products": tangible, public representations of culture such as advertising or popular texts. They found that cultural products that come from Western cultures (mostly the United States) are more individualistic, and less collectivistic, than cultural products that come from collectivistic cultures (including Korea, Japan, China, and Mexico). The effect sizes for cultural products were larger than self-report effect sizes for this dimension (reported in Oyserman, Coon, & Kemmelmeier, 2002). In addition to presenting this evidence, the authors highlight the importance of studying the dynamic relationships between sociocultural environments and psyches.

A Firm Level Study of Information Technology Productivity in Europe Using Financial and Market Based Measures

Directory of Open Access Journals (Sweden)

Alan Peslak

2004-05-01

Full Text Available For many years, business has invested significant resources in information technology, hardware, software, and manpower. The Productivity Paradox is the seeming lack of productivity gains despite the increased investment in IT. For many years the existence of a Productivity Paradox has been the subject of research interest. Conflicting results have been obtained from a variety of data sets. Until this time however there has been no study that has investigated European companies’ use of information technology and its impact on productivity. The objective of this study was to investigate information technology productivity with a new data set from a European published source, and measuring productivity using both market and financial based measures. Results of the study indicated that information technology did have a consistent positive impact on firm level productivity in Europe for the years 1996, 1997, and 1998. Both market and financial based productivity measures provided consistent positive significant returns with regard to IT productivity. The major contribution of the study is that it provides an analysis of the impact of European information technology on firm and economic productivity.

An attempt of assessing the production perspectives concerning malleable iron castings

Directory of Open Access Journals (Sweden)

M.S. Soiński

2009-07-01

Full Text Available The paper presents a historical outline of production of the malleable cast iron castings on the territory of Poland during the past over a hundred years. There have been also gathered data concerning the total quantity of castings and the quantity of malleable iron and nodular iron castings produced in twelve selected countries over the period from 1993 to 2006. The percentage of malleable iron to total production of castings, and for a purpose of comparison the percentage of nodular cast iron to total production of castings, has been determined for these countries. A distinct decreasing tendency can be seen with respect to the production of malleable iron castings, while an increasing trend exists in production of nodular iron castings.

Measurement of Inclusive $\\omega$ and $\\eta$' Production in Hadronic Z Decays

CERN Document Server

Acciarri, M; Aguilar-Benítez, M; Ahlen, S P; Alpat, B; Alcaraz, J; Alemanni, G; Allaby, James V; Aloisio, A; Alverson, G; Alviggi, M G; Ambrosi, G; Anderhub, H; Andreev, V P; Angelescu, T; Anselmo, F; Antreasyan, D; Arefev, A; Azemoon, T; Aziz, T; Bagnaia, P; Baksay, L; Ball, R C; Banerjee, S; Banicz, K; Barillère, R; Barone, L; Bartalini, P; Baschirotto, A; Basile, M; Battiston, R; Bay, A; Becattini, F; Becker, U; Behner, F; Berdugo, J; Berges, P; Bertucci, B; Betev, B L; Bhattacharya, S; Biasini, M; Biland, A; Bilei, G M; Blaising, J J; Blyth, S C; Bobbink, Gerjan J; Böck, R K; Böhm, A; Borgia, B; Boucham, A; Bourilkov, D; Bourquin, Maurice; Boutigny, D; Branson, J G; Brigljevic, V; Brock, I C; Buffini, A; Buijs, A; Burger, J D; Burger, W J; Busenitz, J K; Buytenhuijs, A O; Cai, X D; Campanelli, M; Capell, M; Cara Romeo, G; Caria, M; Carlino, G; Cartacci, A M; Casaus, J; Castellini, G; Cavallari, F; Cavallo, N; Cecchi, C; Cerrada-Canales, M; Cesaroni, F; Chamizo-Llatas, M; Chan, A; Chang, Y H; Chaturvedi, U K; Chemarin, M; Chen, A; Chen, G; Chen, G M; Chen, H F; Chen, H S; Chen, M; Chiefari, G; Chien, C Y; Choi, M T; Cifarelli, Luisa; Cindolo, F; Civinini, C; Clare, I; Clare, R; Cohn, H O; Coignet, G; Colijn, A P; Colino, N; Commichau, V; Costantini, S; Cotorobai, F; de la Cruz, B; Csilling, Akos; Dai, T S; D'Alessandro, R; De Asmundis, R; De Boeck, H; Degré, A; Deiters, K; Denes, P; De Notaristefani, F; DiBitonto, Daryl; Diemoz, M; Van Dierendonck, D N; Di Lodovico, F; Dionisi, C; Dittmar, Michael; Dominguez, A; Doria, A; Dorne, I; Dova, M T; Drago, E; Duchesneau, D; Duinker, P; Durán, I; Dutta, S; Easo, S; Efremenko, Yu V; El-Mamouni, H; Engler, A; Eppling, F J; Erné, F C; Ernenwein, J P; Extermann, Pierre; Fabre, M; Faccini, R; Falciano, S; Favara, A; Fay, J; Fedin, O; Felcini, Marta; Fenyi, B; Ferguson, T; Fernández, D; Ferroni, F; Fesefeldt, H S; Fiandrini, E; Field, J H; Filthaut, Frank; Fisher, P H; Forconi, G; Fredj, L; Freudenreich, Klaus; Furetta, C; Galaktionov, Yu; Ganguli, S N; García-Abia, P; Gau, S S; Gentile, S; Gerald, J; Gheordanescu, N; Giagu, S; Goldfarb, S; Goldstein, J; Gong, Z F; Gougas, Andreas; Gratta, Giorgio; Grünewald, M W; Gupta, V K; Gurtu, A; Gutay, L J; Hartmann, B; Hasan, A; Hatzifotiadou, D; Hebbeker, T; Hervé, A; Van Hoek, W C; Hofer, H; Hoorani, H; Hou, S R; Hu, G; Innocente, Vincenzo; Janssen, H; Jenkes, K; Jin, B N; Jones, L W; de Jong, P; Josa-Mutuberria, I; Kasser, A; Khan, R A; Kamrad, D; Kamyshkov, Yu A; Kapustinsky, J S; Karyotakis, Yu; Kaur, M; Kienzle-Focacci, M N; Kim, D; Kim, J K; Kim, S C; Kim, Y G; Kinnison, W W; Kirkby, A; Kirkby, D; Kirkby, Jasper; Kiss, D; Kittel, E W; Klimentov, A; König, A C; Korolko, I; Koutsenko, V F; Krämer, R W; Krenz, W; Kuijten, H; Kunin, A; Ladrón de Guevara, P; Landi, G; Lapoint, C; Lassila-Perini, K M; Laurikainen, P; Lebeau, M; Lebedev, A; Lebrun, P; Lecomte, P; Lecoq, P; Le Coultre, P; Lee Jae Sik; Lee, K Y; Leggett, C; Le Goff, J M; Leiste, R; Leonardi, E; Levchenko, P M; Li Chuan; Lieb, E H; Lin, W T; Linde, Frank L; Lista, L; Liu, Z A; Lohmann, W; Longo, E; Lu, W; Lü, Y S; Lübelsmeyer, K; Luci, C; Luckey, D; Luminari, L; Lustermann, W; Ma Wen Gan; Maity, M; Majumder, G; Malgeri, L; Malinin, A; Maña, C; Mangla, S; Marchesini, P A; Marin, A; Martin, J P; Marzano, F; Massaro, G G G; McNally, D; Mele, S; Merola, L; Meschini, M; Metzger, W J; Von der Mey, M; Mi, Y; Mihul, A; Van Mil, A J W; Mirabelli, G; Mnich, J; Molnár, P; Monteleoni, B; Moore, R; Morganti, S; Moulik, T; Mount, R; Müller, S; Muheim, F; Nagy, E; Nahn, S; Napolitano, M; Nessi-Tedaldi, F; Newman, H; Nippe, A; Nisati, A; Nowak, H; Opitz, H; Organtini, G; Ostonen, R; Pandoulas, D; Paoletti, S; Paolucci, P; Park, H K; Pascale, G; Passaleva, G; Patricelli, S; Paul, T; Pauluzzi, M; Paus, C; Pauss, Felicitas; Peach, D; Pei, Y J; Pensotti, S; Perret-Gallix, D; Petrak, S; Pevsner, A; Piccolo, D; Pieri, M; Pinto, J C; Piroué, P A; Pistolesi, E; Plyaskin, V; Pohl, M; Pozhidaev, V; Postema, H; Produit, N; Prokofev, D; Prokofiev, D O; Rahal-Callot, G; Rancoita, P G; Rattaggi, M; Raven, G; Razis, P A; Read, K; Ren, D; Rescigno, M; Reucroft, S; Van Rhee, T; Riemann, S; Riemers, B C; Riles, K; Rind, O; Ro, S; Robohm, A; Rodin, J; Rodríguez-Calonge, F J; Roe, B P; Romero, L; Rosier-Lees, S; Rosselet, P; Van Rossum, W; Roth, S; Rubio, Juan Antonio; Rykaczewski, H; Salicio, J; Sánchez, E; Santocchia, A; Sarakinos, M E; Sarkar, S; Sassowsky, M; Sauvage, G; Schäfer, C; Shchegelskii, V; Schmidt-Kärst, S; Schmitz, D; Schmitz, P; Schneegans, M; Scholz, N; Schopper, Herwig Franz; Schotanus, D J; Schwenke, J; Schwering, G; Sciacca, C; Sciarrino, D; Sens, Johannes C; Servoli, L; Shevchenko, S; Shivarov, N; Shoutko, V; Shukla, J; Shumilov, E; Shvorob, A V; Siedenburg, T; Son, D; Sopczak, André; Soulimov, V; Smith, B; Spillantini, P; Steuer, M; Stickland, D P; Stone, H; Stoyanov, B; Strässner, A; Strauch, K; Sudhakar, K; Sultanov, G G; Sun, L Z; Susinno, G F; Suter, H; Swain, J D; Tang, X W; Tauscher, Ludwig; Taylor, L; Ting, Samuel C C; Ting, S M; Tonutti, M; Tonwar, S C; Tóth, J; Tully, C; Tuchscherer, H; Tung, K L; Uchida, Y; Ulbricht, J; Uwer, U; Valente, E; Van de Walle, R T; Vesztergombi, G; Vetlitskii, I; Viertel, Gert M; Vivargent, M; Völkert, R; Vogel, H; Vogt, H; Vorobev, I; Vorobyov, A A; Vorvolakos, A; Wadhwa, M; Wallraff, W; Wang, J C; Wang, X L; Wang, Z M; Weber, A; Wittgenstein, F; Wu, S X; Wynhoff, S; Xu, J; Xu, Z Z; Yang, B Z; Yang, C G; Yao, X Y; Ye, J B; Yeh, S C; You, J M; Zalite, A; Zalite, Yu; Zemp, P; Zeng, Y; Zhang, Z; Zhang, Z P; Zhou, B; Zhou, Y; Zhu, G Y; Zhu, R Y; Zichichi, Antonino; Ziegler, F

1997-01-01

We present a study of the inclusive $\\omega$ and $\\eta^{\\prime}$ production based on 3.1 million hadronic Z decays recorded with the L3 detector at LEP during 1991--1994. The production rates per hadronic Z decay have been measured to be $1.17 \\pm 0.17 $ $\\omega$ mesons and $0.25 \\pm 0.04 $ $\\eta^{\\prime}$ mesons. The production rates and the differential cross sections have been compared with predictions of the JETSET and the HERWIG Monte Carlo models. We have observed that the differential cross sections can be described by an analytical quantum chromodynamics calculation. \\end{document}

Research and application of online measurement system of tire tread profile in automobile tire production

Science.gov (United States)

Wang, Pengyao; Chen, Xiangguang; Yang, Kai; Liu, Xuejiao

2017-01-01

To improve the measuring efficiency of width and thickness of tire tread in the process of automobile tire production, the actual condition for the tire production process is analyzed, and a fast online measurement system based on moving tire tread of tire specifications is established in this paper. The coordinate data of tire tread profile is acquired by 3D laser sensor, and we use C# language for programming which is an object-oriented programming language to complete the development of client program. The system with laser sensor can provide real-time display of tire tread profile and the data to require in the process of tire production. Experimental results demonstrate that the measuring precision of the system is <= 1mm, it can meet the measurement requirements of the production process, and the system has the characteristics of convenient installation and testing, system stable operation.

Linking phenology and biomass productivity in South Dakota mixed-grass prairie

Science.gov (United States)

Rigge, Matthew; Smart, Alexander; Wylie, Bruce; Gilmanov, Tagir; Johnson, Patricia

2013-01-01

Assessing the health of rangeland ecosystems based solely on annual biomass production does not fully describe plant community condition; the phenology of production can provide inferences on species composition, successional stage, and grazing impacts. We evaluate the productivity and phenology of western South Dakota mixed-grass prairie using 2000 to 2008 Moderate Resolution Imaging Spectrometer (MODIS) normalized difference vegetation index (NDVI) satellite imagery at 250 m spatial resolution. Growing season NDVI images were integrated weekly to produce time-integrated NDVI (TIN), a proxy of total annual biomass production, and integrated seasonally to represent annual production by cool (C3) and warm (C4) season species. Additionally, a variety of phenological indicators including cool season percentage of TIN were derived from the seasonal profiles of NDVI. Cool season percentage and TIN were combined to generate vegetation classes, which served as proxies of plant community condition. TIN decreased with precipitation from east to west across the study area. Alternatively, cool season percentage increased from east to west, following patterns related to the reliability (interannual coefficient of variation [CV]) and quantity of mid-summer precipitation. Cool season TIN averaged 76.8% of total. Seasonal accumulation of TIN corresponded closely (R2 > 0.90) to that of gross photosynthesis data from a carbon flux tower. Field-collected biomass and community composition data were strongly related to the TIN and cool season percentage products. The patterns of vegetation classes were responsive to topographic, edaphic, and land management influences on plant communities. Accurate maps of biomass production, cool/warm season composition, and vegetation classes can improve the efficiency of land management by adjusting stocking rates and season of use to maximize rangeland productivity and achieve conservation objectives. Further, our results clarify the spatial and

MEASURING CIRCUIT

Science.gov (United States)

Mahoney, J.R.

1963-01-29

A measuring and balancing arrangement for mass spectrometers permits the ready determination of isotopic ratios and mole and weight percentages by employing a selection of amplifier input resistors to vary sensitivity in a bridge arrangement. (AEC)

Measuring device for weight of glass of glass solidification product to be charged

International Nuclear Information System (INIS)

Yasutake, Nobuhiro; Arai, Masaki; Akashi, Ken-ichi

1998-01-01

The present invention provides a device for accurately calculating the weight of molten glass to be charged during manufacturing glass solidification products of radioactive liquid wastes. Namely, a discharge nozzle at the lower end of a glass melting furnace and an upper end of a vessel for glass solidification materials are connected by a connecting device extensible vertically in a cylindrical shape. Molten glasses are flown down by way of the connecting device and filled into the vessel for solidification products. A first scale is constituted so as to measure the weight of load, and the vessel for solidification products are loaded. A second scale is constituted so as to measure the own weight and a weight of load, and is interposed between a flange at the circumference of a charging port and the lower end of the connecting device, and has an opening for flowing down the molten glass at the central portion. With such a constitution, the first scale can weigh the total of the weight of molten glass charged to the vessel for solidification products, the weight of the vessel for solidification products, the counterforce from the connecting device and the weight of the second scale. If the measured value of the secondary scale and the weight of the vessel for solidification products are subtracted from the former value, the weight of the charged molten glass can be determined. (I.S.)

A new measure for functional similarity of gene products based on Gene Ontology

Directory of Open Access Journals (Sweden)

Lengauer Thomas

2006-06-01

Full Text Available Abstract Background Gene Ontology (GO is a standard vocabulary of functional terms and allows for coherent annotation of gene products. These annotations provide a basis for new methods that compare gene products regarding their molecular function and biological role. Results We present a new method for comparing sets of GO terms and for assessing the functional similarity of gene products. The method relies on two semantic similarity measures; simRel and funSim. One measure (simRel is applied in the comparison of the biological processes found in different groups of organisms. The other measure (funSim is used to find functionally related gene products within the same or between different genomes. Results indicate that the method, in addition to being in good agreement with established sequence similarity approaches, also provides a means for the identification of functionally related proteins independent of evolutionary relationships. The method is also applied to estimating functional similarity between all proteins in Saccharomyces cerevisiae and to visualizing the molecular function space of yeast in a map of the functional space. A similar approach is used to visualize the functional relationships between protein families. Conclusion The approach enables the comparison of the underlying molecular biology of different taxonomic groups and provides a new comparative genomics tool identifying functionally related gene products independent of homology. The proposed map of the functional space provides a new global view on the functional relationships between gene products or protein families.

Measurement of beauty-production in deep inelastic scattering at HERA II

International Nuclear Information System (INIS)

Kahle, B.

2006-04-01

This thesis presents a measurement of beauty quark production in deep inelastic scattering at the ep-collider HERA at √(s)=318 GeV. The measurement is based on data collected at the ZEUS detector in the years 2003/2004, using an integrated luminosity of 39 pb -1 . In the analysis presented in this thesis, events were selected that contain a scattered electron, a jet and a muon inside the jet. The fraction of events from beauty quark production was extracted using the characteristic distribution of the transverse momenta of muons relative to the associated jets. The total visible cross section was measured to be: σ b anti b (ep→eb anti b X→e jetμX')=57.9±5.8(stat.) +3.5 -8.1 (syst.) pb in the kinematic region defined by: Q 2 >4 GeV 2 , y>0.05 und y jet t,lab >5 GeV und -2 jet μ t >1.5 GeV and η μ >-1.6. Differential cross sections were measured in p μ t and η μ , in p jet t and η jet and in Q 2 .Furthermore double differential cross sections d 2 σ/dQ 2 dx were measured. (Orig.)

The global contribution of energy consumption by product exports from China.

Science.gov (United States)

Tang, Erzi; Peng, Chong

2017-06-01

This paper presents a model to analyze the mechanism of the global contribution of energy usage by product exports. The theoretical analysis is based on the perspective that contribution estimates should be in relatively smaller sectors in which the production characteristics could be considered, such as the productivity distribution for each sector. Then, we constructed a method to measure the global contribution of energy usage. The simple method to estimate the global contribution is the percentage of goods export volume compared to the GDP as a multiple of total energy consumption, but this method underestimates the global contribution because it ignores the structure of energy consumption and product export in China. According to our measurement method and based on the theoretical analysis, we calculated the global contribution of energy consumption only by industrial manufactured product exports in a smaller sector per industry or manufacturing sector. The results indicated that approximately 42% of the total energy usage in the whole economy for China in 2013 was contributed to foreign regions. Along with the primary products and service export in China, the global contribution of energy consumption for China in 2013 by export was larger than 42% of the total energy usage.

Skinfold thickness, body fat percentage and body mass index in obese and non-obese Indian boys.

Science.gov (United States)

Chatterjee, Satipati; Chatterjee, Pratima; Bandyopadhyay, Amit

2006-01-01

Childhood obesity is presently increasing worldwide and has created enormous concern for researchers working in the field of obesity related diseases with special interest in child health and development. Selected anthropometric measurements including stature, body mass, and skinfolds are globally accepted sensitive indicators of growth patterns and health status of a child. The present study was therefore aimed not only at evaluating the body mass index (BMI), skinfolds, body fat percentage (%fat) in obese school going boys of West Bengal, India, but also aimed to compare these data with their non-obese counterparts. Ten to sixteen year old obese boys (N = 158) were separated from their non-obese counterparts using the age-wise international cut-off points of BMI. Skinfolds were measured using skinfold calipers, BMI and %fat were calculated from standard equations. Body mass, BMI, skinfolds and %fat were significantly (Pimportance in order to identify or categorize obese boys, and to take preventative steps to minimise serious health problems that appear during the later part of life.

Measurement of charm and beauty production in deep inelastic scattering at HERA

Energy Technology Data Exchange (ETDEWEB)

Roloff, Philipp

2011-12-15

In this thesis two measurements of heavy quark production in deep inelastic scattering at HERA are presented. Cross sections for the production of heavy quarks can be calculated in quantum chromodynamics (QCD). The heavy quark masses represent hard scales, which allow to apply perturbative methods. Charm production has been measured with the ZEUS detector using an integrated luminosity of 120 pb{sup -1}. The hadronic decay channels D{sup +} {yields} K{sup 0}{sub S}{pi}{sup +}, {lambda}{sup +}{sub c} {yields} pK{sup 0}{sub S} and {lambda}{sup +}{sub c} {yields} {lambda}{pi}{sup +} were reconstructed. The presence of a neutral strange hadron in the final state reduces the combinatorial background and extends the measured sensitivity into the region p{sub T}(D{sup +}, {lambda}{sup +}{sub c}) < 1.5 GeV. The inclusive cross section and differential cross sections in p{sub T}{sup 2} (D{sup +}), {eta}(D{sup +}), Q{sup 2} and x for the production of D{sup +} mesons are in reasonable agreement with predictions from perturbative QCD. The fraction of c quarks hadronising into {lambda}{sup +}{sub c} baryons was extracted from a combination of both investigated {lambda}{sup +}{sub c} decay channels. The result is consistent with a previous measurement in the photoproduction regime and with the average e{sup +}e{sup -} value. The production of charm and beauty quarks has been measured with the ZEUS detector using the data collected between 2004 and 2007. This data sample corresponds to an integrated luminosity of 354 pb{sup -1}. The charm and beauty contents in events with a jet were determined using the decay-length significance and invariant mass of the reconstructed secondary decay vertices. Differential cross sections in E{sup jet}{sub T}, {eta}{sup jet}, Q{sup 2} and x are in reasonable agreement with predictions for perturbative QCD. The open charm and beauty contributions to the inclusive proton structure function F{sub 2} were extracted from double differential cross

Carcass and meat quality of Gokceada Goat kids reared under extensive and semi-intensive production systems.

Science.gov (United States)

Ozcan, Mustafa; Yalcintan, Hulya; Tölü, Cemil; Ekiz, Bulent; Yilmaz, Alper; Savaş, Türker

2014-01-01

The aim was to compare the carcass and meat quality characteristics of male and female Gokceada Goat kids produced in extensive (n=20) and semi-intensive (n=20) systems. In extensive and semi-intensive produced kids pre-slaughter weights were 17.44 and 12.51 kg; cold carcass weights were 8.66 and 5.35 kg and cold dressing percentages were 54.9 and 49.28%, respectively. The effect of kid sex was not significant on hot and cold dressing percentages, back fat thickness, M. longissimus dorsi section area, carcass fatness and conformation scores, and carcass measurements, while female kids had higher omental and mesenteric fat and kidney knob and channel fat percentages than male kids. Extensive produced kids had lower meat lightness. Panellists evaluated extensive system kids with higher scores of kid odour intensity, flavour intensity and overall acceptability. It was concluded that it would be more appropriate to use an extensive system in Gokceada Goat breeding for kid meat production. © 2013.

13 CFR 120.210 - What percentage of a loan may SBA guarantee?

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What percentage of a loan may SBA guarantee? 120.210 Section 120.210 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS... percent, except as otherwise authorized by law. [61 FR 3235, Jan. 31, 1996, as amended at 68 FR 51680, Aug...

Solid waste production and its management in dental clinics in Gorgan, northern Iran.

Science.gov (United States)

Nabizadeh, R; Faraji, H; Mohammadi, A A

2014-10-01

Waste produced in dental clinics has been the topic of investigations for many years. These waste materials have important health impacts and are hazardous to humans and the environment. To investigating solid waste production and its management in dental clinics in Gorgan, northern Iran. In this cross-sectional study, 45 of 143 public dental practices and 5 of 25 private dental practices were selected and studied. From each clinic, 3 samples were taken and analyzed at the end of successive working days (Tuesday and Wednesday). Samples were manually sorted into 50 components. The measured components were then classified on the basis of their characteristics, hazard potentials, and WHO classification. The total annual amount of dental waste produced in public and private dental practices in Gorgan was 12 015.1 and 3135.0 kg, respectively. Production percentages of infectious, domestic, chemical and pharmaceutical, and toxic waste in public dental practices were 38.4%, 33.7%, 6.6%, and 0.6%, respectively. The percentages for private practices were 8.7%, 10.6%, 1.1%, and 0.1%, respectively. Dental waste management in Gorgan is inadequate; dental waste is not properly segregated, collected, and disposed, as demanded by the WHO. Employees in dentist offices must be trained in correct handling of waste products and the associated risks.

Hydraulic conductivity in response to exchangeable sodium percentage and solution salt concentration

Directory of Open Access Journals (Sweden)

Jefferson Luiz de Aguiar Paes

2014-10-01

Full Text Available Hydraulic conductivity is determined in laboratory assays to estimate the flow of water in saturated soils. However, the results of this analysis, when using distilled or deionized water, may not correspond to field conditions in soils with high concentrations of soluble salts. This study therefore set out to determine the hydraulic conductivity in laboratory conditions using solutions of different electrical conductivities in six soils representative of the State of Pernambuco, with the exchangeable sodium percentage adjusted in the range of 5-30%. The results showed an increase in hydraulic conductivity with both decreasing exchangeable sodium percentage and increasing electrical conductivity in the solution. The response to the treatments was more pronounced in soils with higher proportion of more active clays. Determination of hydraulic conductivity in laboratory is routinely performed with deionized or distilled water. However, in salt affected soils, these determinations should be carried out using solutions of electrical conductivity different from 0 dS m-1, with values close to those determined in the saturation extracts.

Optical bi-sensorial measurement system for production control of extruded profiles

Science.gov (United States)

Weckenmann, A.; Bernstein, J.

2008-09-01

Extruded profiles are semi-finished products (made out of steel, brass, aluminum, synthetics...) which are appointed for wide applications in manufacturing of technical products. As yet used optical sensors in process control working to the shading technology detect the object's shadow orthographically to the axis of illumination. As a consequence they record it unattached by the profiles coat in measurement range at any point of the measured profile with high precision. As a matter of fact, concave zones cannot be captured. Alternatively the measurement of concave zones can be arranged by light-section systems. These do not comply with the required accuracy, are comparatively slow and moreover affected by dislocations of the section of the profile. A measurement system including a light-section and a shading system combines the advantages of both optical systems. It is to serve with a reliable conception for the assembly of a bi-sensorial measurement system consisting of both systems as well as suitable methods of analysis for the in-line inspection of concave profiles. As a result it contains conclusions concerning requirements of the light source, the arrangement of this source and the cameras, obtainable precision and sampling rate as well as the essential synchronization of both systems. After designing an appropriate prototype, the selected light-section system and the shading system will be synchronized and aligned. Therefore, the metered geometrical data will be merged for the evaluation of form deviation. So, developed and adapted software supports and contains proposals to the uncertainty after successful tests. The system and a calibration method will be proved in production where robustness will be a most critical despite of heat, dust and vibrations. The target uncertainty of less than 0.1 mm at every section of the profiles coat has to be met.

Higher percentage of CD133+ cells is associated with poor prognosis in colon carcinoma patients with stage IIIB

Directory of Open Access Journals (Sweden)

Zhang Xin

2009-07-01

Full Text Available Abstract Background Cancer stem cell model suggested that tumor progression is driven by the overpopulation of cancer stem cells and eradicating or inhibiting the symmetric division of cancer stem cells would become the most important therapeutic strategy. However, clinical evidence for this hypothesis is still scarce. To evaluate the overpopulation hypothesis of cancer stem cells the association of percentage of CD133+ tumor cells with clinicopathological parameters in colon cancer was investigated since CD133 is a putative cancer stem cell marker shared by multiple solid tumors. Patients and methods Tumor tissues matched with adjacent normal tissues were collected from 104 stage IIIB colon cancer patients who were subject to radical resection between January, 1999 to July, 2003 in this center. The CD133 expression was examined with immunohistochemical staining. The correlation of the percentage of CD133+ cell with clinicopathological parameters and patients' 5-year survival was analyzed. Results The CD133+ cells were infrequent and heterogeneous distribution in the cancer tissue. Staining of CD133 was localized not only on the glandular-luminal surface of cancer cells but also on the invasive budding and the poorly differentiated tumors with ductal structures. Both univariate and multivariate survival analysis revealed that the percentage of CD133+ cancer cells and the invasive depth of tumor were independently prognostic. The patients with a lower percentage of CD133+ cancer cells (less than 5% were strongly associated with a higher 5-year survival rate than those with a higher percentage of CD133+ cancer cells (greater than or equal to 55%. Additionally, no correlation was obtained between the percentage of CD133+ cancer cells and the other clinicopathological parameters including gender, age, site of primary mass, pathologic types, grades, and invasive depth. Conclusion The fact that a higher percentage CD133+ cells were strongly associated

Practical Measurement and Productive Persistence: Strategies for Using Digital Learning System Data to Drive Improvement

Science.gov (United States)

Krumm, Andrew E.; Beattie, Rachel; Takahashi, Sola; D'Angelo, Cynthia; Feng, Mingyu; Cheng, Britte

2016-01-01

This paper outlines the development of practical measures of productive persistence using digital learning system data. Practical measurement refers to data collection and analysis approaches originating from improvement science; productive persistence refers to the combination of academic and social mindsets as well as learning behaviours that…

Measurement of high-mass dilepton production with the CMS-TOTEM Precision Proton Spectrometer

CERN Document Server

Shchelina, Ksenia

2017-01-01

The measurements of dilepton production in photon-photon fusion with the CMS-TOTEM Precision Proton Spectrometer (CT-PPS) are presented. For the first time, exclusive dilepton production at high masses have been observed in the CMS detector while one or two outgoing protons are measured in CT-PPS using around 10~${\\rm fb}^{-1}$ of data accumulated in 2016 during high-luminosity LHC operation. These first results show a good understanding, calibration and alignment of the new CT-PPS detectors installed in 2016.

The effect of slaughter weight on pig production efficiency

African Journals Online (AJOL)

Unknown

production costs of a weaner pig, it is possible to determine an optimal ... on growth rate, feed intake, feed conversion ratio, lean meat percentage, production .... versus a classification system neglecting carcass mass is shown in Table 2.

A batch assay to measure microbial hydrogen sulfide production from sulfur-containing solid wastes

International Nuclear Information System (INIS)

Sun, Mei; Sun, Wenjie; Barlaz, Morton A.

2016-01-01

Large volumes of sulfur-containing wastes enter municipal solid waste landfills each year. Under the anaerobic conditions that prevail in landfills, oxidized forms of sulfur, primarily sulfate, are converted to sulfide. Hydrogen sulfide (H 2 S) is corrosive to landfill gas collection and treatment systems, and its presence in landfill gas often necessitates the installation of expensive removal systems. For landfill operators to understand the cost of managing sulfur-containing wastes, an estimate of the H 2 S production potential is needed. The objective of this study was to develop and demonstrate a biochemical sulfide potential (BSP) test to measure the amount of H 2 S produced by different types of sulfur-containing wastes in a relatively fast (30 days) and inexpensive (125 mL serum bottles) batch assay. This study confirmed the toxic effect of H 2 S on both sulfate reduction and methane production in batch systems, and demonstrated that removing accumulated H 2 S by base adsorption was effective for mitigating inhibition. H 2 S production potentials of coal combustion fly ash, flue gas desulfurization residual, municipal solid waste combustion ash, and construction and demolition waste were determined in BSP assays. After 30 days of incubation, most of the sulfate in the wastes was converted to gaseous or aqueous phase sulfide, with BSPs ranging from 0.8 to 58.8 mL H 2 S/g waste, depending on the chemical composition of the samples. Selected samples contained solid phase sulfide which contributed to the measured H 2 S yield. A 60 day incubation in selected samples resulted in 39–86% additional sulfide production. H 2 S production measured in BSP assays was compared with that measured in simulated landfill reactors and that calculated from chemical analyses. H 2 S production in BSP assays and in reactors was lower than the stoichiometric values calculated from chemical composition for all wastes tested, demonstrating the importance of assays to estimate the

Measuring nuclear transparency from exclusive vector meson production in lepton-nucleus scattering

International Nuclear Information System (INIS)

Fang, G.Y.

1994-01-01

Preliminary results on the measurement of nuclear transparencies from exclusive ρ 0 meson production from E665 at Fermilab are reported. The data were collected on hydrogen, deuterium, carbon, calcium, and lead targets with a mean beam energy of 470 GeV. Increases in the transparencies are observed in both coherent and incoherent production channels as the virtuality of the photon increases, as expected of color transparency. Ideas of systematic studies of color transparency in exclusive vector meson production at CEBAF are discussed

Bone densitometry as an indicator of percentage tibia ash in broiler chicks fed varying dietary calcium and phosphorus levels.

Science.gov (United States)

Onyango, E M; Hester, P Y; Stroshine, R; Adeola, O

2003-11-01

The relative sensitivity of tibia bone mineral content (BMC) and density (BMD), percentage ash (ash), and shear force as indicators for dietary Ca and P was compared in 3-wk-old broiler chicks. One hundred eight 7-d-old chicks were grouped by weight into 6 blocks of 3 cages each with 6 birds per cage. Three corn-soybean meal-based diets were randomly assigned to cages within each block. The diets were low P, medium P, and adequate P and were formulated to contain 4.0, 5.1, and 7.8 g of total P/kg feed, respectively; and 5.1, 6.7, and 10.0 g of Ca/kg feed, respectively. The chicks were fed the experimental diets for 14 d. On d 22, chicks were killed, and tibiae were removed from 3 birds/cage. Weight gain, feed intake, feed efficiency, BMC, BMD, shear force, and ash were determined. The BMC and BMD were determined using dual energy x-ray absorptiometry. Correlations among the various bone status variables and dietary Ca and P were determined. Growth performance criteria and ash increased linearly, and BMC and BMD increased linearly and quadratically as dietary concentrations of Ca and P increased. The correlation coefficient between dietary Ca and BMC, BMD, shear force, or ash was 0.89, 0.91, 0.50, or 0.89, respectively; and between dietary P and BMC, BMD, shear force, or ash was 0.88, 0.91, 0.48, or 0.89, respectively. The correlation coefficient between ash and BMC, BMD, or shear force was 0.92, 0.93, or 0.67, respectively. The correlation coefficients for linear regression between shear force and BMC or BMD was 0.56. The regression model for predicting percentage ash using BMD was as follows: percentage ash = 24 + (240 x BMD) with an r2 of 86%. It is concluded that in broiler chicks, tibia ash, BMC, and BMD may be more sensitive than shear force as indicators of dietary Ca and P concentrations and that BMD as measured by dual energy x-ray absorptiometry may be used to predict percentage of tibia ash.

Measurements of the potential ozone production rate in a forest

Science.gov (United States)

Crilley, L.; Sklaveniti, S.; Kramer, L.; Bloss, W.; Flynn, J. H., III; Alvarez, S. L.; Erickson, M.; Dusanter, S.; Locoge, N.; Stevens, P. S.; Millet, D. B.; Alwe, H. D.

2017-12-01

Biogenic volatile organic compounds (BVOC) are a significant source of organic compounds globally and alongside NOx play a key role in the formation of ozone in the troposphere. Understanding how changes in NOx concentrations feed through to altered ozone production in BVOC dominated environments will aid our understanding of future atmospheric composition, notably as developing nations transition from NOx dominated to NOx limited chemistry as a result of mitigation strategies. Here we empirically investigate this ambient ozone formation potential. We report deployment of a custom built instrument to measure in near real time the potential for in situ chemical ozone production, using an artificial light source. Our results are thus indicative of the ozone formation potential for a sampled ambient air mixture, including full VOC complexity, i.e. independent of characterization of individual organic compounds. Ground level measurements were performed as part of the PROPHET-AMOS 2016 field campaign, at a site located within a Northern Michigan forest that has typically low NOx abundance, but high isoprene and terpenoid loadings. As the ambient NOx concentrations were low during the campaign, experiments were performed in which NO was artificially added to the sampled ambient air mixture, to quantify changes in the potential ozone production rate as a function of NOx, and hence the ozone forming characteristics of the ambient air. Preliminarily results from these experiments are presented, and indicate that while ozone production increases with added NO, significant variation was observed for a given NO addition, reflecting differences in the ambient VOC chemical reactivity and ozone formation tendency.

The Effects of Aloe Vera on TNF-a Levels, the Percentage of Nk Cells and Th 17 Cells in Rat That Received Izoniazid and Rifampycin.

Science.gov (United States)

Mawarti, Herin; Rajin, Mukhamad; Asumta, Zulfikar

2017-10-01

The present study was undertaken to investigate the hepatoprotective effect of Aloe vera against side effect of antituberculosis drug. Twenty-five rats will be divided into five groups, namely the control group (without any treatment), the group of rats treated with anti-tuberculosis drugs, and a group of rats were treated antituberculosis drugs and got Aloe vera extract at a dose of 40; 80; and 120 mg/kg body weight. Antituberculosis drugs are isoniazid and rifampicin a dose of 50 mg/kg body weight. Antituberculosis treated group showed significantly increase levels of TNF-a, the percentage of NK cells and the number of Th17 cells compared with the control group ( p 0.05). Aloe vera at first and the third dose lower the number of NK cells compared to the antituberculosis group, although it has not yet reached a significant difference ( p > 0.05). The first dose of Aloe vera was significantly decreased the percentage of Th17 cells compared to the antituberculosis drug group ( p 0.05). It was concluded that administration of Aloe vera can suppress the production of TNF-a and the percentage of Th17 cells as a result of antituberculosis drug administration. Thus, Aloe vera can be a useful alternative to natural materials in the successful treatment of tuberculosis through the inhibition of side effect.

Measurement of $J/\\psi$ production in $pp$ collisions at $\\sqrt{s}=2.76$ TeV

CERN Document Server

Aaij, R; Adametz, A; Adeva, B; Adinolfi, M; Adrover, C; Affolder, A; Ajaltouni, Z; Albrecht, J; Alessio, F; Alexander, M; Ali, S; Alkhazov, G; Alvarez Cartelle, P; Alves Jr, A A; Amato, S; Amhis, Y; Anderlini, L; Anderson, J; Andreassen, R; Appleby, R B; Aquines Gutierrez, O; Archilli, F; Artamonov, A; Artuso, M; Aslanides, E; Auriemma, G; Bachmann, S; Back, J J; Baesso, C; Balagura, V; Baldini, W; Barlow, R J; Barschel, C; Barsuk, S; Barter, W; Bates, A; Bauer, Th; Bay, A; Beddow, J; Bediaga, I; Belogurov, S; Belous, K; Belyaev, I; Ben-Haim, E; Benayoun, M; Bencivenni, G; Benson, S; Benton, J; Berezhnoy, A; Bernet, R; Bettler, M -O; van Beuzekom, M; Bien, A; Bifani, S; Bird, T; Bizzeti, A; Bjørnstad, P M; Blake, T; Blanc, F; Blanks, C; Blouw, J; Blusk, S; Bobrov, A; Bocci, V; Bondar, A; Bondar, N; Bonivento, W; Borghi, S; Borgia, A; Bowcock, T J V; Bowen, E; Bozzi, C; Brambach, T; van den Brand, J; Bressieux, J; Brett, D; Britsch, M; Britton, T; Brook, N H; Brown, H; Büchler-Germann, A; Burducea, I; Bursche, A; Buytaert, J; Cadeddu, S; Callot, O; Calvi, M; Calvo Gomez, M; Camboni, A; Campana, P; Carbone, A; Carboni, G; Cardinale, R; Cardini, A; Carranza-Mejia, H; Carson, L; Carvalho Akiba, K; Casse, G; Cattaneo, M; Cauet, Ch; Charles, M; Charpentier, Ph; Chen, P; Chiapolini, N; Chrzaszcz, M; Ciba, K; Cid Vidal, X; Ciezarek, G; Clarke, P E L; Clemencic, M; Cliff, H V; Closier, J; Coca, C; Coco, V; Cogan, J; Cogneras, E; Collins, P; Comerma-Montells, A; Contu, A; Cook, A; Coombes, M; Corti, G; Couturier, B; Cowan, G A; Craik, D; Cunliffe, S; Currie, R; D'Ambrosio, C; David, P; David, P N Y; De Bonis, I; De Bruyn, K; De Capua, S; De Cian, M; De Miranda, J M; De Paula, L; De Silva, W; De Simone, P; Decamp, D; Deckenhoff, M; Degaudenzi, H; Del Buono, L; Deplano, C; Derkach, D; Deschamps, O; Dettori, F; Di Canto, A; Dickens, J; Dijkstra, H; Diniz Batista, P; Dogaru, M; Domingo Bonal, F; Donleavy, S; Dordei, F; Dosil Suárez, A; Dossett, D; Dovbnya, A; Dupertuis, F; Dzhelyadin, R; Dziurda, A; Dzyuba, A; Easo, S; Egede, U; Egorychev, V; Eidelman, S; van Eijk, D; Eisenhardt, S; Eitschberger, U; Ekelhof, R; Eklund, L; El Rifai, I; Elsasser, Ch; Elsby, D; Falabella, A; Färber, C; Fardell, G; Farinelli, C; Farry, S; Fave, V; Ferguson, D; Fernandez Albor, V; Ferreira Rodrigues, F; Ferro-Luzzi, M; Filippov, S; Fitzpatrick, C; Fontana, M; Fontanelli, F; Forty, R; Francisco, O; Frank, M; Frei, C; Frosini, M; Furcas, S; Furfaro, E; Gallas Torreira, A; Galli, D; Gandelman, M; Gandini, P; Gao, Y; Garofoli, J; Garosi, P; Garra Tico, J; Garrido, L; Gaspar, C; Gauld, R; Gersabeck, E; Gersabeck, M; Gershon, T; Ghez, Ph; Gibson, V; Gligorov, V V; Göbel, C; Golubkov, D; Golutvin, A; Gomes, A; Gordon, H; Grabalosa Gándara, M; Graciani Diaz, R; Granado Cardoso, L A; Graugés, E; Graziani, G; Grecu, A; Greening, E; Gregson, S; Grünberg, O; Gui, B; Gushchin, E; Guz, Yu; Gys, T; Hadjivasiliou, C; Haefeli, G; Haen, C; Haines, S C; Hall, S; Hampson, T; Hansmann-Menzemer, S; Harnew, N; Harnew, S T; Harrison, J; Harrison, P F; Hartmann, T; He, J; Heijne, V; Hennessy, K; Henrard, P; Hernando Morata, J A; van Herwijnen, E; Hicks, E; Hill, D; Hoballah, M; Hombach, C; Hopchev, P; Hulsbergen, W; Hunt, P; Huse, T; Hussain, N; Hutchcroft, D; Hynds, D; Iakovenko, V; Ilten, P; Imong, J; Jacobsson, R; Jaeger, A; Jans, E; Jansen, F; Jaton, P; Jing, F; John, M; Johnson, D; Jones, C R; Jost, B; Kaballo, M; Kandybei, S; Karacson, M; Karbach, T M; Kenyon, I R; Kerzel, U; Ketel, T; Keune, A; Khanji, B; Kochebina, O; Komarov, I; Koopman, R F; Koppenburg, P; Korolev, M; Kozlinskiy, A; Kravchuk, L; Kreplin, K; Kreps, M; Krocker, G; Krokovny, P; Kruse, F; Kucharczyk, M; Kudryavtsev, V; Kvaratskheliya, T; La Thi, V N; Lacarrere, D; Lafferty, G; Lai, A; Lambert, D; Lambert, R W; Lanciotti, E; Lanfranchi, G; Langenbruch, C; Latham, T; Lazzeroni, C; Le Gac, R; van Leerdam, J; Lees, J -P; Lefèvre, R; Leflat, A; Lefrançois, J; Leroy, O; Li, Y; Li Gioi, L; Liles, M; Lindner, R; Linn, C; Liu, B; Liu, G; von Loeben, J; Lopes, J H; Lopez Asamar, E; Lopez-March, N; Lu, H; Luisier, J; Luo, H; Mac Raighne, A; Machefert, F; Machikhiliyan, I V; Maciuc, F; Maev, O; Malde, S; Manca, G; Mancinelli, G; Mangiafave, N; Marconi, U; Märki, R; Marks, J; Martellotti, G; Martens, A; Martin, L; Martín Sánchez, A; Martinelli, M; Martinez Santos, D; Martins Tostes, D; Massafferri, A; Matev, R; Mathe, Z; Matteuzzi, C; Matveev, M; Maurice, E; Mazurov, A; McCarthy, J; McNulty, R; Meadows, B; Meier, F; Meissner, M; Merk, M; Milanes, D A; Minard, M -N; Molina Rodriguez, J; Monteil, S; Moran, D; Morawski, P; Mountain, R; Mous, I; Muheim, F; Müller, K; Muresan, R; Muryn, B; Muster, B; Naik, P; Nakada, T; Nandakumar, R; Nasteva, I; Needham, M; Neufeld, N; Nguyen, A D; Nguyen, T D; Nguyen-Mau, C; Nicol, M; Niess, V; Niet, R; Nikitin, N; Nikodem, T; Nisar, S; Nomerotski, A; Novoselov, A; Oblakowska-Mucha, A; Obraztsov, V; Oggero, S; Ogilvy, S; Okhrimenko, O; Oldeman, R; Orlandea, M; Otalora Goicochea, J M; Owen, P; Pal, B K; Palano, A; Palutan, M; Panman, J; Papanestis, A; Pappagallo, M; Parkes, C; Parkinson, C J; Passaleva, G; Patel, G D; Patel, M; Patrick, G N; Patrignani, C; Pavel-Nicorescu, C; Pazos Alvarez, A; Pellegrino, A; Penso, G; Pepe Altarelli, M; Perazzini, S; Perego, D L; Perez Trigo, E; Pérez-Calero Yzquierdo, A; Perret, P; Perrin-Terrin, M; Pessina, G; Petridis, K; Petrolini, A; Phan, A; Picatoste Olloqui, E; Pietrzyk, B; Pilař, T; Pinci, D; Playfer, S; Plo Casasus, M; Polci, F; Polok, G; Poluektov, A; Polycarpo, E; Popov, D; Popovici, B; Potterat, C; Powell, A; Prisciandaro, J; Pugatch, V; Puig Navarro, A; Qian, W; Rademacker, J H; Rakotomiaramanana, B; Rangel, M S; Raniuk, I; Rauschmayr, N; Raven, G; Redford, S; Reid, M M; dos Reis, A C; Ricciardi, S; Richards, A; Rinnert, K; Rives Molina, V; Roa Romero, D A; Robbe, P; Rodrigues, E; Rodriguez Perez, P; Rogers, G J; Roiser, S; Romanovsky, V; Romero Vidal, A; Rouvinet, J; Ruf, T; Ruiz, H; Sabatino, G; Saborido Silva, J J; Sagidova, N; Sail, P; Saitta, B; Salzmann, C; Sanmartin Sedes, B; Sannino, M; Santacesaria, R; Santamarina Rios, C; Santovetti, E; Sapunov, M; Sarti, A; Satriano, C; Satta, A; Savrie, M; Savrina, D; Schaack, P; Schiller, M; Schindler, H; Schleich, S; Schlupp, M; Schmelling, M; Schmidt, B; Schneider, O; Schopper, A; Schune, M -H; Schwemmer, R; Sciascia, B; Sciubba, A; Seco, M; Semennikov, A; Senderowska, K; Sepp, I; Serra, N; Serrano, J; Seyfert, P; Shapkin, M; Shapoval, I; Shatalov, P; Shcheglov, Y; Shears, T; Shekhtman, L; Shevchenko, O; Shevchenko, V; Shires, A; Silva Coutinho, R; Skwarnicki, T; Smith, N A; Smith, E; Smith, M; Sobczak, K; Sokoloff, M D; Soler, F J P; Soomro, F; Souza, D; Souza De Paula, B; Spaan, B; Sparkes, A; Spradlin, P; Stagni, F; Stahl, S; Steinkamp, O; Stoica, S; Stone, S; Storaci, B; Straticiuc, M; Straumann, U; Subbiah, V K; Swientek, S; Syropoulos, V; Szczekowski, M; Szczypka, P; Szumlak, T; T'Jampens, S; Teklishyn, M; Teodorescu, E; Teubert, F; Thomas, C; Thomas, E; van Tilburg, J; Tisserand, V; Tobin, M; Tolk, S; Tonelli, D; Topp-Joergensen, S; Torr, N; Tournefier, E; Tourneur, S; Tran, M T; Tresch, M; Tsaregorodtsev, A; Tsopelas, P; Tuning, N; Ubeda Garcia, M; Ukleja, A; Urner, D; Uwer, U; Vagnoni, V; Valenti, G; Vazquez Gomez, R; Vazquez Regueiro, P; Vecchi, S; Velthuis, J J; Veltri, M; Veneziano, G; Vesterinen, M; Viaud, B; Vieira, D; Vilasis-Cardona, X; Vollhardt, A; Volyanskyy, D; Voong, D; Vorobyev, A; Vorobyev, V; Voß, C; Voss, H; Waldi, R; Wallace, R; Wandernoth, S; Wang, J; Ward, D R; Watson, N K; Webber, A D; Websdale, D; Whitehead, M; Wicht, J; Wiedner, D; Wiggers, L; Wilkinson, G; Williams, M P; Williams, M; Wilson, F F; Wishahi, J; Witek, M; Witzeling, W; Wotton, S A; Wright, S; Wu, S; Wyllie, K; Xie, Y; Xing, F; Xing, Z; Yang, Z; Young, R; Yuan, X; Yushchenko, O; Zangoli, M; Zavertyaev, M; Zhang, F; Zhang, L; Zhang, W C; Zhang, Y; Zhelezov, A; Zhokhov, A; Zhong, L; Zvyagin, A

2013-01-01

The production of $J/\\psi$ mesons is studied with the LHCb detector using data from $pp$ collisions at $\\sqrt{s}=2.76\\, {\\rm TeV}$ corresponding to an integrated luminosity of $71\\,{\\rm nb}^{-1}$. The differential cross-section for inclusive $J/\\psi$ production is measured as a function of its transverse momentum $p_{\\rm T}$. The cross-section in the fiducial region $0measured to be $5.6\\pm 0.1\\,({\\rm stat})\\pm 0.4\\,({\\rm syst})\\,\\mu{\\rm b}$, with the assumption of unpolarised $J/\\psi$ production. The fraction of $J/\\psi$ production from $b$-hadron decays is measured to be $(7.1\\pm 0.6\\,({\\rm stat})\\pm0.7\\,({\\rm syst}))\\%$.

Actinide, Elemental, and Fission Product Measurements by ICPMS at the Savannah River Site

International Nuclear Information System (INIS)

Tovo, L.L.; Waller, P.R.; Clymire, J.; Jones, V.D.; Boyce, W.T.

1998-03-01

VG Elemental Inductively coupled plasma-mass spectrometer (ICPMS), PlasmaQuad 1 (PQ1) Model No. 4, installed in a radiohood, is used by the Savannah River Technology Center to provide non-routine mass measurements for environmental monitoring, waste tank characterization studies, isotope ratios for criticality determinations, and the measurement of elemental, fission product, and actinide mass distributions of the glass product from the Defense Waste Processing Facility (DWPF). Modifications to improve instrument reliability, sample preparation, and data handling, as well as modifications to the laboratory that permit measurements in a radioactive environment will be discussed. Based on our operating experience, two laboratory facilities are being prepared for additional instruments to operate in a radioactive environment. A separate instrument is being installed for non-radioactive measurements and method development

Measurement of Neutrino Induced, Charged Current, Charged Pion Production

Energy Technology Data Exchange (ETDEWEB)

Wilking, Michael Joseph [Univ. of Colorado, Boulder, CO (United States)

2009-05-01

Neutrinos are among the least understood particles in the standard model of particle physics. At neutrino energies in the 1 GeV range, neutrino properties are typically determined by observing the outgoing charged lepton produced in a charged current quasi-elastic interactions. The largest charged current background to these measurements comes from charged current pion production interactions, for which there is very little available data.

Effects of Artemisin and Moringa oleifera Extract Combination on CD4+ and CD8+ Percentage of Mice Infected with Plasmodium berghei

Directory of Open Access Journals (Sweden)

Melda Fio Flora BR. Sijabat

2016-11-01

Full Text Available This research aims to examine the effect of Artemisin and Moringa oleifera leaf extract combination on the percentage of CD4+ and CD8+ T cell of mice infected with P.berghei. CD4+ and CD8+ T cells have important role in eliminating Plasmodium intracellular parasite that causes malaria infection. Artemisin is a potent antimalarial that kills the parasite through free radicals production. Excessive free radicals damage the immune cells, including CD4+ and CD8+ T cells. Flavonoid (quercetin and kaempferol bioactive on Moringa leaves is a powerful antioxidant and anti-inflammatory, and is expected to prevent and decrease the adverse effects of Artemisin. This experimental post-test group research was conducted on six groups, i.e. normal mice (negative control, P.berghei infected mice without treatment (positive control, and four other groups, i.e. P.berghei infected mice and treated with Artemisin 0.004mg/gBW (A, and combinations of Artemisin 0.004mg/gBW and Moringa leaf extract 0.125mg/gBW (DK1, 0.250mg/gBW (DK2, and 0.500mg/gBW (DK3. On day 3 and 7, blood samples from each group were drawn randomly, parasitemia degree was calculated microscopically (magnification 1000 times, the percentage of CD4+ and CD8+ T cells was determined using flowcytometry. The results of this study indicated that the administration of Artemisin and Moringa leaf extract combination for 7 days significant increased the percentage of CD4 + T cells in DK2 (p=0.001 and DK3 (p=0.000, and decreased the degree of parasitemia in DK1 (p=0.000, DK2 (p=0.000, and DK3 (p=0.000, however CD8 + T cells show no difference. There was a relationship between Artemisin and Moringa leaf extract combination with the degree of parasitemia (p=0.000 and the percentage of CD4+ T cells (p = 0.000, but not on CD8+ T cells.   Keywords: parasitemia, CD4+ and CD8+ T cells, Moringa oleifera

An unattended device for high-voltage sampling and passive measurement of thoron decay products

Energy Technology Data Exchange (ETDEWEB)

Gierl, Stefanie; Meisenberg, Oliver, E-mail: oliver.meisenberg@helmholtz-muenchen.de; Wielunski, Marek; Tschiersch, Jochen [Helmholtz Zentrum München, German Research Center for Environmental Health, Institute of Radiation Protection, Ingolstädter Landstr. 1, 85764 Neuherberg (Germany); Haninger, Thomas [Helmholtz Zentrum München, German Research Center for Environmental Health, Auswertungsstelle für Strahlendosimeter, Otto-Hahn-Ring 6, 81739 München (Germany)

2014-02-15

An integrating measurement device for the concentration of airborne thoron decay products was designed and calibrated. It is suitable for unattended use over up to several months also in inhabited dwellings. The device consists of a hemispheric capacitor with a wire mesh as the outer electrode on ground potential and the sampling substrates as the inner electrode on +7.0 kV. Negatively charged and neutral thoron decay products are accelerated to and deposited on the sampling substrates. As sampling substrates, CR39 solid-state nuclear track detectors are used in order to record the alpha decay of the sampled decay products. Nuclide discrimination is achieved by covering the detectors with aluminum foil of different thickness, which are penetrated only by alpha particles with sufficient energy. Devices of this type were calibrated against working level monitors in a thoron experimental house. The sensitivity was measured as 9.2 tracks per Bq/m{sup 3} × d of thoron decay products. The devices were used over 8 weeks in several houses built of earthen material in southern Germany, where equilibrium equivalent concentrations of 1.4–9.9 Bq/m{sup 3} of thoron decay products were measured.

20 CFR Appendix Vi to Subpart C of... - Percentage of Automatic Increases in Primary Insurance Amounts Since 1978

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Percentage of Automatic Increases in Primary... ADMINISTRATION FEDERAL OLD-AGE, SURVIVORS AND DISABILITY INSURANCE (1950- ) Computing Primary Insurance Amounts Pt. 404, Subpt. C, App. VI Appendix VI to Subpart C of Part 404—Percentage of Automatic Increases in...

EVALUATION OF FERMENTATION PARAMETERS DURING HIGH-GRAVITY BEER PRODUCTION

Directory of Open Access Journals (Sweden)

R.B. Almeida

2001-12-01

Full Text Available A large number of advantages are obtained from the use of highly concentrated worts during the production of beer in a process referred to as "high-gravity". However, problems related to slow or stuck fermentations, which cause the lower productivity and possibility of contamination, are encountered. This study examines the influence of factors pH, percentage of corn syrup, initial wort concentration and fermentation temperature on the fermentation parameters, namely productivity, wort attenuation and the yield coefficient for sugar-to-ethanol conversion. The results show that productivity increased when the higher temperature, the higher wort concentration and the lower syrup percentage were used, while wort attenuation increased when lower wort concentration and no syrup were used. The yield coefficient for sugar-to-ethanol conversion was not influenced by any of the factors studied.

Helium production measurements for neutron dosimetry and damage correlations

International Nuclear Information System (INIS)

Farrar, H. IV; Lippincott, E.P.

1978-01-01

Helium accumulation fluence monitors (HAFM's), consisting of miniature vanadium capsules containing small, accurately-known amounts of 10 B or 6 Li, are being used routinely for neutron dosimetry measurements in breeder reactor environments. Additionally, solid wires of Al, Fe and Cu have been irradiated by 14.8-MeV neutrons from the d-T reaction, and measurements of the helium production along these wires have given detailed neutron fluence profiles. Additional materials with relatively high (n,α) cross sections are being tested in a wide variety of neutron environments to select HAFM sets that will provide spectral information by unfolding techniques. The mass spectrometric helium measurement technique has been demonstrated to produce results with better than 2% (1 sigma) absolute accuracy. Intercomparisons with other laboratories have demonstrated good correlations with radiometric and fission chamber dosimetry results

Application of x-ray residual stress measurement to products

International Nuclear Information System (INIS)

Goto, T.; Iwamura, T.

1975-01-01

The X-ray residual stress measuring method is the only nondestructive method for measuring residual stress in polycrystalline materials. It is capable of obtaining information not only on macroscopic stress but also microscopic stress. The authors are employing this method for the development of pre-service and in-service inspection methods and for the improvement of various manufacturing techniques. In this paper, the results of measurement of some products as examples of its application are described. The examples introduced concern the following: (1) Selection of optimum conditions in heat treatment and stress-relief treatment. (2) Residual stress produced by mechanical processes such as autofrettage and flow form. (3) Check of manufacturing processes of rotary shaft and welded parts. (4) Estimation of fatigue strength of shot-peened part. (5) Detection of fatigue damage of shot-peened part. (auth.)

41 CFR 101-29.102 - Use of metric system of measurement in Federal product descriptions.

Science.gov (United States)

2010-07-01

... PROCUREMENT 29-FEDERAL PRODUCT DESCRIPTIONS 29.1-General § 101-29.102 Use of metric system of measurement in... measurement in Federal product descriptions. 101-29.102 Section 101-29.102 Public Contracts and Property... Federal agencies to: (a) Maintain close liaison with other Federal agencies, State and local governments...

Body fat percentage is better than indicators of weight status to identify children and adolescents with unfavorable lipid profile.

Science.gov (United States)

Oliosa, Polyana Romano; Zaniqueli, Divanei; Alvim, Rafael de Oliveira; Barbosa, Miriam Carmo Rodrigues; Mill, José Geraldo

2018-01-05

To assess whether the indicators of weight status body mass index and waist-to-height ratio are similar to body fat percentage to identify obese children and adolescents with unfavorable lipid profile. This was a cross-sectional study involving 840 children and adolescents (6-18 years). The same individuals were classified as non-obese (

percentage and indicators of weight status, body mass index, and waist-to-height ratio. Body fat percentage was obtained by multi-frequency bioelectrical impedance. Linear association between obesity and increased lipid fractions was tested by ANCOVA. Normal distribution curves of non-HDL cholesterol were designed for obese and non-obese. To provide the proportion of obese individuals with elevated non-HDL-c across all indicators, Z-score was calculated. Obese boys presented higher non-HDL cholesterol when compared with those non-obese, classified by body mass index (107±28 vs. 94±25mg/dL, p=0.001), waist-to-height ratio (115±29 vs. 94±25mg/dL, p<0.001) and body fat percentage (119±33 vs. 94±24mg/dL, p<0.001). Differently, obese girls presented with higher non-HDL cholesterol when compared with those non-obese only according to the body fat percentage classification (118±24 vs. 96±26mg/dL, p=0.001). A large shift to the right in the distribution curve of non-HDL cholesterol among obese girls compared with non-obese was observed only when body fat percentage was used to discriminate between obese and non-obese. Body fat percentage was better than the indicators of weight status to identify children and adolescents with unfavorable lipid profile, mainly among girls. Copyright © 2017. Published by Elsevier Editora Ltda.

Percentage of Protected Area Amounts within each Watershed Boundary for the Conterminous US

Science.gov (United States)

Abstract: This dataset uses spatial information from the Watershed Boundary Dataset (WBD, March 2011) and the Protected Areas Database of the United States (PAD-US Version 1.0). The resulting data layer, with percentages of protected areas by category, was created using the ATtI...

Calorimetric measurement of afterheat in target materials for the accelerator production of tritium

International Nuclear Information System (INIS)

Perry, R.B.

1994-01-01

The estimate of afterheat in a spallation target of lead (Pb) or tungsten (W), by calorimetry, is the purpose of this experiment in support of the Accelerator Production of Tritium (APT). Such measurements are needed to confirm code calculations, these being the only practical way of gaining this type of information in a form suitable to aid the design of the APT machine. Knowledge of the magnitude and duration of afterheat resulting from decay of activation products produced by proton bombardment of the target is necessary to quantify APT safety assumptions, to design target cooling and safety systems, and to reduce technical risk. Direct calorimetric measurement of the afterheat for the appropriate incident proton energies is more reliable than the available alternative, which is indirect, based on data from gamma-ray spectroscopy measurements. The basic concept, a direct measurement of decay afterheat which bypasses the laborious classical way of determining this quantity, has been demonstrated to work. The gamma-ray energy given off by the decay products produced in the activation of lead or tungsten with high-energy protons apparently does represent a significant fraction of the total decay energy. A calorimeter designed for measurement of isotopes decaying by alpha emission must be modified to reduce energy lost with escaping gamma rays. Replacement of the aluminum liner with a tungsten liner in the SSC measurement chamber resulted in a 270% increase in measured heat, proving that the energy loss in the earlier (1992) measurements was significant. Gamma-ray measurements are needed to confirm the gamma-ray absorption calculations for the calorimeter to determine the correction for loss of heat due to transmission of high-energy gamma rays through the calorimeter walls. The experiments at BLIP have shown that calorimetry can be a useful tool in measuring the afterheat in APT target materials

Measuring nuclear transparency from exclusive vector meson production in lepton-nucleus scattering

Energy Technology Data Exchange (ETDEWEB)

Fang, G.Y. [Harvard Univ., Cambridge, MA (United States)

1994-04-01

Preliminary results on the measurement of nuclear transparencies from exclusive {rho}{sup 0} meson production from E665 at Fermilab are reported. The data were collected on hydrogen, deuterium, carbon, calcium, and lead targets with a mean beam energy of 470 GeV. Increases in the transparencies are observed in both coherent and incoherent production channels as the virtuality of the photon increases, as expected of color transparency. Ideas of systematic studies of color transparency in exclusive vector meson production at CEBAF are discussed.

Output, input and productivity measures at the industry level : The EU KLEMS Database

NARCIS (Netherlands)

O'Mahony, M.; Timmer, M.P.

This article describes the contents and the construction of the EU KLEMS Growth and Productivity Accounts. This database contains industry-level measures of output, inputs and productivity for 25 European countries, Japan and the US for the period from 1970 onwards. The article considers the

Attenuation properties and percentage depth dose of tannin-based Rhizophora spp. particleboard phantoms using computed tomography (CT) and treatment planning system (TPS) at high energy x-ray beams

Energy Technology Data Exchange (ETDEWEB)

Yusof, M. F. Mohd, E-mail: mfahmi@usm.my [School of Physics, Universiti Sains Malaysia, 11800 Penang (Malaysia); School of Health Sciences, Universiti Sains Malaysia, 16150 Kota Bharu, Kelantan (Malaysia); Abdullah, R. [School of Health Sciences, Universiti Sains Malaysia, 16150 Kota Bharu, Kelantan (Malaysia); Tajuddin, A. A. [School of Physics, Universiti Sains Malaysia, 11800 Penang (Malaysia); Advanced Medical and Dental Institute, Universiti Sains Malaysia, 13200 Kepala Batas, Penang (Malaysia); Hashim, R. [School of Industrial Technologies, Universiti Sains Malaysia, 11800 Penang (Malaysia); Bauk, S. [Physics Section, School of Distance Education, Universiti Sains Malaysia, 11800 Penang (Malaysia)

2016-01-22

A set of tannin-based Rhizophora spp. particleboard phantoms with dimension of 30 cm x 30 cm was fabricated at target density of 1.0 g/cm{sup 3}. The mass attenuation coefficient of the phantom was measured using {sup 60}Co gamma source. The phantoms were scanned using Computed Tomography (CT) scanner and the percentage depth dose (PDD) of the phantom was calculated using treatment planning system (TPS) at 6 MV and 10 MV x-ray and compared to that in solid water phantoms. The result showed that the mass attenuation coefficient of tannin-based Rhizohora spp. phantoms was near to the value of water with χ{sup 2} value of 1.2. The measured PDD also showed good agreement with solid water phantom at both 6 MV and 10 MV x-ray with percentage deviation below 8% at depth beyond the maximum dose, Z{sub max}.

24 CFR 1000.238 - What percentage of the IHBG funds can be used for administrative and planning expenses?

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false What percentage of the IHBG funds can be used for administrative and planning expenses? 1000.238 Section 1000.238 Housing and Urban... ACTIVITIES Indian Housing Plan (IHP) § 1000.238 What percentage of the IHBG funds can be used for...

The application of the percentage change calculation in the context of inflation in Mathematical Literacy

Directory of Open Access Journals (Sweden)

Sarah Bansilal

2017-07-01

Full Text Available The school subject Mathematical Literacy requires application of mathematics procedures in various contextual settings, but not much is known about the ways in which students engage with contextual settings such as inflation. This qualitative study was conducted with in-service Mathematical Literacy teachers in South Africa with the purpose of exploring the extent to which the teachers recognised the contextual constraints involved in applying the percentage change calculation to the inflation context. The written responses of the 406 Mathematical Literacy teachers were scrutinised to identify their interpretations of the contextual constraints involved in applying the percentage change procedure to the context of inflation. The item required the application of two successive percentage change operations (corresponding to the inflation rates for the 2 years. Of the 406 responses that were analysed, 260 (65% were unable to take account of all the contextual constraints. There were 108 teachers who reduced the procedure to a one-step calculation while 64 teachers interpreted the context as a percentage decrease scenario. A large number of teachers (162 struggled with the interpretation of the role of the year, k, in the relationship between the quantities. The findings indicate that engagement with and understanding of the concept of inflation is dependent on a synthesis of the contextual constraints into the mathematical procedures. This article provides some insights into the struggles with making sense of the contextual nature of inflation which is an area that has received little attention in mathematics education studies. The teachers’ struggles likely mirror learners’ struggles and hence the research applies in a similar way to learners.

Statistical methods for assessing agreement between continuous measurements

DEFF Research Database (Denmark)

Sokolowski, Ineta; Hansen, Rikke Pilegaard; Vedsted, Peter

Background: Clinical research often involves study of agreement amongst observers. Agreement can be measured in different ways, and one can obtain quite different values depending on which method one uses. Objective: We review the approaches that have been discussed to assess the agreement between...... continuous measures and discuss their strengths and weaknesses. Different methods are illustrated using actual data from the `Delay in diagnosis of cancer in general practice´ project in Aarhus, Denmark. Subjects and Methods: We use weighted kappa-statistic, intraclass correlation coefficient (ICC......), concordance coefficient, Bland-Altman limits of agreement and percentage of agreement to assess the agreement between patient reported delay and doctor reported delay in diagnosis of cancer in general practice. Key messages: The correct statistical approach is not obvious. Many studies give the product...

Measurement of WW production with the ATLAS detector and constraints on associated triple gauge couplings

CERN Document Server

Liu, JB; The ATLAS collaboration

2013-01-01

The measurement of the WW diboson production cross section in proton proton interactions with the ATLAS experiment is presented. The measurement is performed using W boson fully leptonical decays including ee, emu and mumu final states associated with large missing energy. Measured total and differential cross sections of WW production are compared to NLO predictions of the standard model. Leading lepton pT distribution is used to place constraints on anomalous triple gauge boson couplings.

Monte Carlo simulation of air sampling methods for the measurement of radon decay products.

Science.gov (United States)

Sima, Octavian; Luca, Aurelian; Sahagia, Maria

2017-08-01

A stochastic model of the processes involved in the measurement of the activity of the 222 Rn decay products was developed. The distributions of the relevant factors, including air sampling and radionuclide collection, are propagated using Monte Carlo simulation to the final distribution of the measurement results. The uncertainties of the 222 Rn decay products concentrations in the air are realistically evaluated. Copyright © 2017 Elsevier Ltd. All rights reserved.

Distinguishing the elements of a full product basis set needs only projective measurements and classical communication

International Nuclear Information System (INIS)

Chen Pingxing; Li Chengzu

2004-01-01

Nonlocality without entanglement is an interesting field. A manifestation of quantum nonlocality without entanglement is the possible local indistinguishability of orthogonal product states. In this paper we analyze the character of operators to distinguish the elements of a full product basis set in a multipartite system, and show that distinguishing perfectly these product bases needs only local projective measurements and classical communication, and these measurements cannot damage each product basis. Employing these conclusions one can discuss local distinguishability of the elements of any full product basis set easily. Finally we discuss the generalization of these results to the locally distinguishability of the elements of incomplete product basis set

Centers for Disease Control and Prevention Funding for HIV Testing Associated With Higher State Percentage of Persons Tested.

Science.gov (United States)

Hayek, Samah; Dietz, Patricia M; Van Handel, Michelle; Zhang, Jun; Shrestha, Ram K; Huang, Ya-Lin A; Wan, Choi; Mermin, Jonathan

2015-01-01

To assess the association between state per capita allocations of Centers for Disease Control and Prevention (CDC) funding for HIV testing and the percentage of persons tested for HIV. We examined data from 2 sources: 2011 Behavioral Risk Factor Surveillance System and 2010-2011 State HIV Budget Allocations Reports. Behavioral Risk Factor Surveillance System data were used to estimate the percentage of persons aged 18 to 64 years who had reported testing for HIV in the last 2 years in the United States by state. State HIV Budget Allocations Reports were used to calculate the state mean annual per capita allocations for CDC-funded HIV testing reported by state and local health departments in the United States. The association between the state fixed-effect per capita allocations for CDC-funded HIV testing and self-reported HIV testing in the last 2 years among persons aged 18 to 64 years was assessed with a hierarchical logistic regression model adjusting for individual-level characteristics. The percentage of persons tested for HIV in the last 2 years. In 2011, 18.7% (95% confidence interval = 18.4-19.0) of persons reported being tested for HIV in last 2 years (state range, 9.7%-28.2%). During 2010-2011, the state mean annual per capita allocation for CDC-funded HIV testing was $0.34 (state range, $0.04-$1.04). A $0.30 increase in per capita allocation for CDC-funded HIV testing was associated with an increase of 2.4 percentage points (14.0% vs 16.4%) in the percentage of persons tested for HIV per state. Providing HIV testing resources to health departments was associated with an increased percentage of state residents tested for HIV.

Measurement methods to assess methane production of individual dairy cows in a barn

NARCIS (Netherlands)

Wu, L.

2016-01-01

Abstract

Mitigation of methane production from dairy cows is critical to reduce the dairy industry’s contribution to the production of greenhouse gases. None of current used methane measurement methods are flawless and application of the methods is limited to assess the

Measurement of Fission Product Yields from Fast-Neutron Fission

Science.gov (United States)

Arnold, C. W.; Bond, E. M.; Bredeweg, T. A.; Fowler, M. M.; Moody, W. A.; Rusev, G.; Vieira, D. J.; Wilhelmy, J. B.; Becker, J. A.; Henderson, R.; Kenneally, J.; Macri, R.; McNabb, D.; Ryan, C.; Sheets, S.; Stoyer, M. A.; Tonchev, A. P.; Bhatia, C.; Bhike, M.; Fallin, B.; Gooden, M. E.; Howell, C. R.; Kelley, J. H.; Tornow, W.

2014-09-01

One of the aims of the Stockpile Stewardship Program is a reduction of the uncertainties on fission data used for analyzing nuclear test data [1,2]. Fission products such as 147Nd are convenient for determining fission yields because of their relatively high yield per fission (about 2%) and long half-life (10.98 days). A scientific program for measuring fission product yields from 235U,238U and 239Pu targets as a function of bombarding neutron energy (0.1 to 15 MeV) is currently underway using monoenergetic neutron beams produced at the 10 MV Tandem Accelerator at TUNL. Dual-fission chambers are used to determine the rate of fission in targets during activation. Activated targets are counted in highly shielded HPGe detectors over a period of several weeks to identify decaying fission products. To date, data have been collected at neutron bombarding energies 4.6, 9.0, 14.5 and 14.8 MeV. Experimental methods and data reduction techniques are discussed, and some preliminary results are presented.

Measurement, calculation and evaluation of photon production cross-sections

International Nuclear Information System (INIS)

Kocherov, N.P.

1990-03-01

The IAEA Specialists' Meeting on Measurement, Calculation and Evaluation of Photon Production Cross-Sections was held in Smolenice, Czechoslovakia, 5-7 February 1990. The meeting was hosted by the Institute of Physics of the Electro-Physical Research Centre, Slovak Academy of Sciences, Bratislava. This report contains the conclusions and recommendations of this meeting. The papers which the participants have presented at the meeting will be published as an INDC Report. (author)

Boosting aquaculture production systems in Osun state: Role of ...

African Journals Online (AJOL)

This scenario leaves a high percentage of the population who depend on fish and fish products food insecure, and thus, the need to boost aquaculture production to argument the supply from the wild. The study therefore looks into the possibility of boosting the production systems through the use of micro-credit and ...

On scaling cosmogenic nuclide production rates for altitude and latitude using cosmic-ray measurements

Science.gov (United States)

Desilets, Darin; Zreda, Marek

2001-11-01

The wide use of cosmogenic nuclides for dating terrestrial landforms has prompted a renewed interest in characterizing the spatial distribution of terrestrial cosmic rays. Cosmic-ray measurements from neutron monitors, nuclear emulsions and cloud chambers have played an important role in developing new models for scaling cosmic-ray neutron intensities and, indirectly, cosmogenic production rates. Unfortunately, current scaling models overlook or misinterpret many of these data. In this paper, we describe factors that must be considered when using neutron measurements to determine scaling formulations for production rates of cosmogenic nuclides. Over the past 50 years, the overwhelming majority of nucleon flux measurements have been taken with neutron monitors. However, in order to use these data for scaling spallation reactions, the following factors must be considered: (1) sensitivity of instruments to muons and to background, (2) instrumental biases in energy sensitivity, (3) solar activity, and (4) the way of ordering cosmic-ray data in the geomagnetic field. Failure to account for these factors can result in discrepancies of as much as 7% in neutron attenuation lengths measured at the same location. This magnitude of deviation can result in an error on the order of 20% in cosmogenic production rates scaled from 4300 m to sea level. The shapes of latitude curves of nucleon flux also depend on these factors to a measurable extent, thereby causing additional uncertainties in cosmogenic production rates. The corrections proposed herein significantly improve our ability to transfer scaling formulations based on neutron measurements to scaling formulations applicable to spallation reactions, and, therefore, constitute an important advance in cosmogenic dating methodology.

Measurement of J/ψ production in pp collisions at √(s)=7 TeV

International Nuclear Information System (INIS)

Aaij, R.; Amoraal, J.; Bauer, T.

2011-01-01

The production of J/ψ mesons in proton-proton collisions at √(s)=7 ∝ TeV is studied with the LHCb detector at the LHC. The differential cross-section for prompt J/ψ production is measured as a function of the J/ψ transverse momentum p T and rapidity y in the fiducial region p T in[0;14]∝GeV mskip-2μ mskip-1mu c and y element of [2.0;4.5]. The differential cross-section and fraction of J/ψ from b-hadron decays are also measured in the same p T and y ranges. The analysis is based on a data sample corresponding to an integrated luminosity of 5.2 pb -1 . The measured cross-sections integrated over the fiducial region are for prompt J/ψ production and for J/ψ from b-hadron decays, where the first uncertainty is statistical and the second systematic. The prompt J/ψ production cross-section is obtained assuming no J/ψ polarisation and the third error indicates the acceptance uncertainty due to this assumption. (orig.)

Quality appraisal of generic self-reported instruments measuring health-related productivity changes: a systematic review

Science.gov (United States)

2014-01-01

Background Health impairments can result in disability and changed work productivity imposing considerable costs for the employee, employer and society as a whole. A large number of instruments exist to measure health-related productivity changes; however their methodological quality remains unclear. This systematic review critically appraised the measurement properties in generic self-reported instruments that measure health-related productivity changes to recommend appropriate instruments for use in occupational and economic health practice. Methods PubMed, PsycINFO, Econlit and Embase were systematically searched for studies whereof: (i) instruments measured health-related productivity changes; (ii) the aim was to evaluate instrument measurement properties; (iii) instruments were generic; (iv) ratings were self-reported; (v) full-texts were available. Next, methodological quality appraisal was based on COSMIN elements: (i) internal consistency; (ii) reliability; (iii) measurement error; (iv) content validity; (v) structural validity; (vi) hypotheses testing; (vii) cross-cultural validity; (viii) criterion validity; and (ix) responsiveness. Recommendations are based on evidence syntheses. Results This review included 25 articles assessing the reliability, validity and responsiveness of 15 different generic self-reported instruments measuring health-related productivity changes. Most studies evaluated criterion validity, none evaluated cross-cultural validity and information on measurement error is lacking. The Work Limitation Questionnaire (WLQ) was most frequently evaluated with moderate respectively strong positive evidence for content and structural validity and negative evidence for reliability, hypothesis testing and responsiveness. Less frequently evaluated, the Stanford Presenteeism Scale (SPS) showed strong positive evidence for internal consistency and structural validity, and moderate positive evidence for hypotheses testing and criterion validity. The

Measurement of charmonium production in heavy-ion collisions with the ATLAS detector

CERN Document Server

AUTHOR|(INSPIRE)INSPIRE-00511724; The ATLAS collaboration

2017-01-01

The suppression of heavy charmonia states in heavy-ion collisions is a phenomenon understood as a consequence of quark gluon plasma formation in the hot, dense system formed in heavy ion collisions at the LHC. In addition to hot matter effects in heavy-ion collisions, cold nuclear effects may also affect heavy charmonia production. Therefore, a full assessment requires detailed studies on the effects present in both A+A and p+A collisions. Based on p+Pb data collected in 2013 and pp and Pb+Pb data collected in 2015 at the LHC, the ATLAS experiment has studied prompt and non-prompt $J/\\psi$ and $\\psi$(2S) productions via the dimuon decay final states. The production and excited-to-ground state ratios of heavy charmonia measured in both p+Pb and Pb+Pb collision data with respect to that measured in pp collision data will be presented in intervals of transverse momentum, rapidity and centrality.

Multi-strange baryon production in pp, p-Pb and Pb-Pb collisions measured with ALICE

CERN Document Server

Colella, Domenico

2014-01-01

The production of {\\Xi}$^{-}$ and {\\Omega}$^{-}$ baryons and their anti-particles in pp, p-Pb and Pb-Pb collisions has been measured by the ALICE Collaboration. These hyperons are reconstructed via the detection of their charged weak-decay products, which are identified through their measured ionisation losses and momenta in the ALICE Time Projection Chamber. Comparing the production yields in Pb-Pb and pp collisions, a strangeness enhancement has been measured and found to increase with the centrality of the collision and with the strangeness content of the baryon; moreover, in the comparison with similar measurements at lower energies, it decreases as the centre-of-mass energy increases, following the trend already observed moving from SPS to RHIC. Recent measurement of cascade and {\\Omega} in p-Pb interactions are compared with results in Pb-Pb and pp collisions and with predictions from thermal models, based on a grand canonical approach. The nuclear modification factors for the charged {\\Xi} and {\\Omega}...

Geographically Weighted Regression Model with Kernel Bisquare and Tricube Weighted Function on Poverty Percentage Data in Central Java Province

Science.gov (United States)

Nugroho, N. F. T. A.; Slamet, I.

2018-05-01

Poverty is a socio-economic condition of a person or group of people who can not fulfil their basic need to maintain and develop a dignified life. This problem still cannot be solved completely in Central Java Province. Currently, the percentage of poverty in Central Java is 13.32% which is higher than the national poverty rate which is 11.13%. In this research, data of percentage of poor people in Central Java Province has been analyzed through geographically weighted regression (GWR). The aim of this research is therefore to model poverty percentage data in Central Java Province using GWR with weighted function of kernel bisquare, and tricube. As the results, we obtained GWR model with bisquare and tricube kernel weighted function on poverty percentage data in Central Java province. From the GWR model, there are three categories of region which are influenced by different of significance factors.

Effects of Heat Stress on Construction Labor Productivity in Hong Kong: A Case Study of Rebar Workers.

Science.gov (United States)

Yi, Wen; Chan, Albert P C

2017-09-12

Global warming is bringing more frequent and severe heat waves, and the result will be serious for vulnerable populations such as construction workers. Excessive heat stress has profound effects on physiological responses, which cause occupational injuries, fatalities and low productivity. Construction workers are particularly affected by heat stress, because of the body heat production caused by physically demanding tasks, and hot and humid working conditions. Field studies were conducted between August and September 2016 at two construction training grounds in Hong Kong. Onsite wet-bulb globe temperature (WBGT), workers' heart rate (HR), and labor productivity were measured and monitored. Based on the 378 data sets of synchronized environmental, physiological, construction labor productivity (CLP), and personal variables, a CLP-heat stress model was established. It was found that WBGT, percentage of maximum HR, age, work duration, and alcohol drinking habits were determining factors for predicting the CLP (adjusted R ² = 0.68, p stress reduces CLP, with the percentage of direct work time decreasing by 0.33% when the WBGT increased by 1 °C. The findings in this study extend the existing practice notes by providing scientific data that may be of benefit to the industry in producing solid guidelines for working in hot weather.

Measurements of the $B$ meson production cross-sections at LHCb

CERN Document Server

LIU, Bo; ROBBE, Patrick; HE, Jibo

Quantum Chromodynamics (QCD), one of the most fundamental components of the Standard Model theory of Particle Physics, is dedicated to describe the strong interactions among quarks and gluons. For the $B$ meson production cross-sections in hadron-hadron collisions, perturbative QCD (pQCD) calculations are available at next-to-leading order (NLO) and with the fixed-order plus next-to-leading logarithms (FONLL) approximations. Measuring $B$ meson production cross-sections at the Large Hadron Collider (LHC) is of great importance to test the pQCD calculations. The LHCb detector is a single-arm forward spectrometer. It collects the physical information of the products in proton-proton collisions at the LHC. The differential and total production cross-sections of $B$ mesons (including $B^+$, $B^0$ and $B_s^0$) in proton-proton collisions at $\\sqrt{s}=7\\,{\\rm TeV}$ are studied using 35${\\rm pb}^{-1}$ of data in 2010 and 370${\\rm pb}^{-1}$ of data in 2011 collected by the LHCb detector, and reported in this dissert...

A batch assay to measure microbial hydrogen sulfide production from sulfur-containing solid wastes

Energy Technology Data Exchange (ETDEWEB)

Sun, Mei, E-mail: msun8@uncc.edu [Department of Civil, Construction, and Environmental Engineering, North Carolina State University, Campus Box 7908, Raleigh, NC (United States); Sun, Wenjie, E-mail: wsun@smu.edu [Department of Civil, Construction, and Environmental Engineering, North Carolina State University, Campus Box 7908, Raleigh, NC (United States); Department of Civil and Environmental Engineering, Southern Methodist University, PO Box 750340, Dallas, TX (United States); Barlaz, Morton A., E-mail: barlaz@ncsu.edu [Department of Civil, Construction, and Environmental Engineering, North Carolina State University, Campus Box 7908, Raleigh, NC (United States)

2016-05-01

Large volumes of sulfur-containing wastes enter municipal solid waste landfills each year. Under the anaerobic conditions that prevail in landfills, oxidized forms of sulfur, primarily sulfate, are converted to sulfide. Hydrogen sulfide (H{sub 2}S) is corrosive to landfill gas collection and treatment systems, and its presence in landfill gas often necessitates the installation of expensive removal systems. For landfill operators to understand the cost of managing sulfur-containing wastes, an estimate of the H{sub 2}S production potential is needed. The objective of this study was to develop and demonstrate a biochemical sulfide potential (BSP) test to measure the amount of H{sub 2}S produced by different types of sulfur-containing wastes in a relatively fast (30 days) and inexpensive (125 mL serum bottles) batch assay. This study confirmed the toxic effect of H{sub 2}S on both sulfate reduction and methane production in batch systems, and demonstrated that removing accumulated H{sub 2}S by base adsorption was effective for mitigating inhibition. H{sub 2}S production potentials of coal combustion fly ash, flue gas desulfurization residual, municipal solid waste combustion ash, and construction and demolition waste were determined in BSP assays. After 30 days of incubation, most of the sulfate in the wastes was converted to gaseous or aqueous phase sulfide, with BSPs ranging from 0.8 to 58.8 mL H{sub 2}S/g waste, depending on the chemical composition of the samples. Selected samples contained solid phase sulfide which contributed to the measured H{sub 2}S yield. A 60 day incubation in selected samples resulted in 39–86% additional sulfide production. H{sub 2}S production measured in BSP assays was compared with that measured in simulated landfill reactors and that calculated from chemical analyses. H{sub 2}S production in BSP assays and in reactors was lower than the stoichiometric values calculated from chemical composition for all wastes tested, demonstrating

Measurement of the inclusive jet and dijet production with the ATLAS detector

CERN Document Server

Hubacek, Zdenek; The ATLAS collaboration

2018-01-01

The production of inclusive jets and di-jets at hadron colliders provides a stringent test of perturbative QCD at the highest energies. The process can also be used to probe the gluon density function of the proton. The ATLAS collaboration has measured the inclusive jet production cross section in 20.3 /fb of data collected at a center-of-mass energy of 8TeV and in 3.2 /fb of data collected at a center-of-mass energy of 13TeV. The measurements have been performed differentially in jet rapidity and transverse momentum. The collaboration also presents a measurement of the di-jet cross section at a center-of-mass energy of 13TeV as a function of the di-jet mass and rapidity-difference. The results have been compared with state-of-the-art theory predictions at NLO in pQCD, interfaced with different parton distribution functions. Special focus is drawn on the correlation models of the associated systematic uncertainties and the interpretation of the chi2-values resulting from theory comparisons. The 13 TeV measure...

The transformation factor: a measure for the productive behaviour of a manufacturing process

NARCIS (Netherlands)

Ron, de A.J.

1993-01-01

By using advanced manufacturing processes, production results should increase. Nevertheless managers have their doubts to invest in such processes because of the financial risks and the absence of adequate technical and economical measures which should support their decisions. Measures which contain

Measurement of inclusive eta production in e+e- interactions near charm threshold

International Nuclear Information System (INIS)

Porter, F.C.

1981-01-01

We have measured the inclusive cross section for eta production in e + e - interactions near charm threshold using the Crystal Ball detector at SPEAR. By comparing the inclusive eta production above and below charm threshold we obtain the limits: R(e + e - →FFX) BR(F→etax)<0.3 (90% C.L., E/sub c.m./<4.5 GeV); BR(D→etax)<0.13

A nonlinear model of gold production in Malaysia

Science.gov (United States)

Ramli, Norashikin; Muda, Nora; Umor, Mohd Rozi

2014-06-01

Malaysia is a country which is rich in natural resources and one of it is a gold. Gold has already become an important national commodity. This study is conducted to determine a model that can be well fitted with the gold production in Malaysia from the year 1995-2010. Five nonlinear models are presented in this study which are Logistic model, Gompertz, Richard, Weibull and Chapman-Richard model. These model are used to fit the cumulative gold production in Malaysia. The best model is then selected based on the model performance. The performance of the fitted model is measured by sum squares error, root mean squares error, coefficient of determination, mean relative error, mean absolute error and mean absolute percentage error. This study has found that a Weibull model is shown to have significantly outperform compare to the other models. To confirm that Weibull is the best model, the latest data are fitted to the model. Once again, Weibull model gives the lowest readings at all types of measurement error. We can concluded that the future gold production in Malaysia can be predicted according to the Weibull model and this could be important findings for Malaysia to plan their economic activities.

High performance management: An illustrative example of sales departments’ productivity measurement

OpenAIRE

Halkos, George E.; Tzeremes, Nickolaos G

2009-01-01

This paper describes a conceptual approach to measure and compare productivity of resource utilization at the firm level, adapting a set of techniques known as Data Envelopment Analysis (DEA). Within this approach, the paper addresses the issues of multiple inputs and multiple outputs of the sales departments of a firm. In particular, we focus on the resource management of sales departments. The proposed measurement methodology will allow assessment of the impact of different management polic...

A new technique to measure fission-product diffusion coefficients in UO2 fuel

International Nuclear Information System (INIS)

Hocking, W.H.; Verrall, R.A.; Bushby, S.J.

1999-01-01

This paper describes a new out-reactor technique for the measurement of fission-product diffusion rates in UO 2 . The technique accurately simulates in-reactor fission-fragment effects: a thermal diffusion that is due to localized mixing in the fission track, radiation-enhanced diffusion that is due to point-defect creation by fission fragments, and bubble resolution. The technique utilizes heavy-ion accelerators - low energy (40 keV to 1 MeV) for fission-product implantation, high energy (72 MeV) to create fission-fragment damage effects, and secondary ion mass spectrometry (SIMS) for measuring the depth profile of the implanted species. Preliminary results are presented from annealing tests (not in the 72 MeV ion flux) at 1465 deg. C and 1650 deg. C at low and high concentrations of fission products. (author)

Measurement bias detection with Kronecker product restricted models for multivariate longitudinal data: an illustration with health-related quality of life data from thirteen measurement occasions.

Science.gov (United States)

Verdam, Mathilde G E; Oort, Frans J

2014-01-01

Application of Kronecker product to construct parsimonious structural equation models for multivariate longitudinal data.A method for the investigation of measurement bias with Kronecker product restricted models.Application of these methods to health-related quality of life data from bone metastasis patients, collected at 13 consecutive measurement occasions.The use of curves to facilitate substantive interpretation of apparent measurement bias.Assessment of change in common factor means, after accounting for apparent measurement bias.Longitudinal measurement invariance is usually investigated with a longitudinal factor model (LFM). However, with multiple measurement occasions, the number of parameters to be estimated increases with a multiple of the number of measurement occasions. To guard against too low ratios of numbers of subjects and numbers of parameters, we can use Kronecker product restrictions to model the multivariate longitudinal structure of the data. These restrictions can be imposed on all parameter matrices, including measurement invariance restrictions on factor loadings and intercepts. The resulting models are parsimonious and have attractive interpretation, but require different methods for the investigation of measurement bias. Specifically, additional parameter matrices are introduced to accommodate possible violations of measurement invariance. These additional matrices consist of measurement bias parameters that are either fixed at zero or free to be estimated. In cases of measurement bias, it is also possible to model the bias over time, e.g., with linear or non-linear curves. Measurement bias detection with Kronecker product restricted models will be illustrated with multivariate longitudinal data from 682 bone metastasis patients whose health-related quality of life (HRQL) was measured at 13 consecutive weeks.