A user experience evaluation of Amazon Kindle mobile application

Science.gov (United States)

Hussain, Azham; Mkpojiogu, Emmanuel O. C.; Musa, Ja'afaru; Mortada, Salah

2017-10-01

There is a dramatic increase in the development of mobile applications in recent years. This makes the usability evaluation of these mobile applications an important aspect in the advancement and application of technology. In this paper, a laboratory-based usability evaluation was carried out on the Amazon Kindle app using 15 users who performed 5 tasks on the Kindle e-book mobile app. A post-test questionnaire was administered to elicit users' perception on the usability of the application. The results demonstrate that almost all the participants were satisfied with services provided by the Amazon Kindle e-book mobile app. On all the four user experience factors examined, namely, perceived ease-of-use, perceived visibility, perceived enjoyabilty, and perceived efficiency, the evaluation outcome shows that the participants had a good and rich mobile experience with the application.

Synaptic degeneration and remodelling after fast kindling of the olfactory bulb

DEFF Research Database (Denmark)

Woldbye, D P; Bolwig, T G; Kragh, J

1996-01-01

in the basolateral amygdala and dentate gyrus, suggesting that these regions may be functionally altered during the kindling process. In the piriform cortex and dentate gyrus increased NCAM/D3(SNAP-25) ratios found ipsilaterally at seven days after kindling probably reflect an elevated rate of synaptic remodelling...

Inhibitory Effect of High Dose of the Flavonoid Quercetin on Amygdala Electrical Kindling in Rats

Directory of Open Access Journals (Sweden)

Tourandokht Baluchnejadmojarad

2010-05-01

Full Text Available A B S T R A C T Introduction: Epilepsy is a chronic neurological disorder in which patients experience spontaneous recurrent seizures. Although the most commonly recommended therapy is drug treatment, some patients do not achieve adequate control of their seizures on existing drugs. New medications with novel mechanisms of action are needed to help those patients whose seizures are resistant to currently-available drugs. Therefore, the anti-convulsant effect of a high dose of quercetin was evaluated in amygdala kindling model in male rats. Methods: Rats were divided into sham-operated group, quercetintreated SH, kindled, and quercetin-treated kindled rats. Quercetin was administered i.p. one day before amygdale kindling for 3 weeks (40 mg/kg/day. The parameters seizure stage, AD duration, the latency to the onset of stage 4, and the duration of stage 5 were analyzed. Results: The results showed that quercetin pretreatment causes a lower seizure intensity in treated kindled rats (p<0.05-0.01, a lower after-discharge duration (p<0.05-0.01, and a higher latency to stage IV (p<0.05 as compared to untreated kindled ones. Discussion: To conclude, chronic administration of quercetin inhibits amygdala electrical kindling and more studies are warranted to clarify its underlying mechanisms.

Kindling: A Model for the Development of Tardive Dyskinesia?

Directory of Open Access Journals (Sweden)

B. Glenthøj

1988-01-01

Full Text Available Tardive dyskinesia (TD from long-term neuroleptic treatment may be irreversible; therefore prevention has become a major concern. A controversial issue with regard to the clinical use of neuroleptic drugs is the possible influence on the development of TD of drug holidays. The major characteristics of kindling, theories of TD and the role of multiplicity in the development of TD are described. Some clinical studies point to interruption of neuroleptic therapy being a risk factor for development of irreversible TD. Induction of dyskinesia in non-human primates has been demonstrated after repeated administration of haloperidol. Rodent studies have not been conclusive. Several experimental results link TD with kindling: both conditions involve repeated stimulations, both seem to involve increased receptor responsiveness and in both conditions does depression in GABA transmission in SNR (substantia nigra; pars reticulata play an important role. It is concluded that the kindling hypothesis is relevant to the investigation of TD.

Temporal pattern of AP-1 DNA-binding activity in the rat hippocampus following a kindled seizure

Energy Technology Data Exchange (ETDEWEB)

Shomori, T. [Department of Neurology, Okayama University Medical School, 2-5-1, Shikata-cho Okayama (Japan); Hayabara, T. [Clinical Research Institute, National Sanatorium Minamiokayama Hospital, 4066 Hayashima-cho (Japan); Ishihara, T. [Department of Neuropsychiatry, Okayama University Medical School, 2-5-1 Shikata-cho Okayama (Japan); Okada, S. [Department of Neurology, Okayama University Medical School, 2-5-1, Shikata-cho Okayama (Japan); Akiyama, K. [Department of Neuropsychiatry, Okayama University Medical School, 2-5-1 Shikata-cho Okayama (Japan); Sato, K. [Clinical Research Institute, National Sanatorium Minamiokayama Hospital, 4066 Hayashima-cho (Japan); Kashihara, K. [Department of Neurology, Okayama University Medical School, 2-5-1, Shikata-cho Okayama (Japan)

1997-07-28

DNA binding by transcripton factor AP-1 was enhanced remarkably following kindling stimulation in rat amygdala. Maximum increase occurred 2 h after stimulation with return to baseline within 24 h. Supershift and western analyses revealed that 38,000 mol. wt Fos-related antigen and JunD were the main components of the evoked AP-1 complexes at the time their induction reached maximum. AP-1 induction 2 h after the last kindling stimulation was more prominent in samples from previously kindled rats than in those from non-kindled rats. This study sought to establish the role of AP-1 in plastic changes of the hippocampus associated with kindling. Male Sprague-Dawley rats were kindled from the left amygdala until they exhibited Racine [15] class 5 generalized seizures. Nuclear proteins were extracted from dorsal hippocampi obtained from 0 to 24 h after final stimulations. From these, we evaluated the temporal pattern of DNA binding by AP-1 using a gel mobility-shift assay with a {sup 32}P-labelled AP-1 probe. Supershift and western analyses were added to investigate components of the seizure-evoked AP-1 complexes. Our results suggest that the basal level of AP-1 complexes is not associated with the seizure susceptibility in kindling. However, development of kindling appears to facilitate stimulus-evoked AP-1 induction, probably via plastic changes in the central nervous system. AP-1 may mediate such changes by regulating expression of certain genes. (Copyright (c) 1997 Elsevier Science B.V., Amsterdam. All rights reserved.)

Susceptibility to hippocampal kindling seizures is increased in aging C57 black mice

Directory of Open Access Journals (Sweden)

Kurt R. Stover

2017-12-01

Full Text Available The incidence of seizures increases with old age. Stroke, dementia and brain tumors are recognized risk factors for new-onset seizures in the aging populations and the incidence of these conditions also increased with age. Whether aging is associated with higher seizure susceptibility in the absence of the above pathologies remains unclear. We used classic kindling to explore this issue as the kindling model is highly reproducible and allows close monitoring of electrographic and motor seizure activities in individual animals. We kindled male young and aging mice (C57BL/6 strain, 2–3 and 18–22 months of age via daily hippocampal CA3 stimulation and monitored seizure activity via video and electroencephalographic recordings. The aging mice needed fewer stimuli to evoke stage-5 motor seizures and exhibited longer hippocampal afterdischarges and more frequent hippocampal spikes relative to the young mice, but afterdischarge thresholds and cumulative afterdischarge durations to stage 5 motor seizures were not different between the two age groups. While hippocampal injury and structural alterations at cellular and micro-circuitry levels remain to be examined in the kindled mice, our present observations suggest that susceptibility to hippocampal CA3 kindling seizures is increased with aging in male C57 black mice.

Acute cognitive impact of antiseizure drugs in naive rodents and corneal-kindled mice.

Science.gov (United States)

Barker-Haliski, Melissa L; Vanegas, Fabiola; Mau, Matthew J; Underwood, Tristan K; White, H Steve

2016-09-01

Some antiseizure drugs (ASDs) are associated with cognitive liability in patients with epilepsy, thus ASDs without this risk would be preferred. Little comparative pharmacology exists with ASDs in preclinical models of cognition. Few pharmacologic studies exist on the acute effects in rodents with chronic seizures. Predicting risk for cognitive impact with preclinical models may supply valuable ASD differentiation data. ASDs (phenytoin [PHT]; carbamazepine [CBZ]; valproic acid [VPA]; lamotrigine [LTG]; phenobarbital [PB]; tiagabine [TGB]; retigabine [RTG]; topiramate [TPM]; and levetiracetam [LEV]) were administered equivalent to maximal electroshock median effective dose ([ED50]; mice, rats), or median dose necessary to elicit minimal motor impairment (median toxic dose [TD50]; rats). Cognition models with naive adult rodents were novel object/place recognition (NOPR) task with CF-1 mice, and Morris water maze (MWM) with Sprague-Dawley rats. Selected ASDs were also administered to rats prior to testing in an open field. The effect of chronic seizures and ASD administration on cognitive performance in NOPR was also determined with corneal-kindled mice. Mice that did not achieve kindling criterion (partially kindled) were included to examine the effect of electrical stimulation on cognitive performance. Sham-kindled and age-matched mice were also tested. No ASD (ED50) affected latency to locate the MWM platform; TD50 of PB, RTG, TPM, and VPA reduced this latency. In naive mice, CBZ and VPA (ED50) reduced time with the novel object. Of interest, no ASD (ED50) affected performance of fully kindled mice in NOPR, whereas CBZ and LEV improved cognitive performance of partially kindled mice. Standardized approaches to the preclinical evaluation of an ASD's potential cognitive impact are needed to inform drug development. This study demonstrated acute, dose- and model-dependent effects of therapeutically relevant doses of ASDs on cognitive performance of naive mice and

Levetiracetam attenuates hippocampal expression of synaptic plasticity-related immediate early and late response genes in amygdala-kindled rats

Directory of Open Access Journals (Sweden)

Watson William P

2010-01-01

Full Text Available Abstract Background The amygdala-kindled rat is a model for human temporal lobe epilepsy and activity-dependent synaptic plasticity. Hippocampal RNA isolated from amygdala-kindled rats at different kindling stages was analyzed to identify kindling-induced genes. Furthermore, effects of the anti-epileptic drug levetiracetam on kindling-induced gene expression were examined. Results Cyclooxygenase-2 (Cox-2, Protocadherin-8 (Pcdh8 and TGF-beta-inducible early response gene-1 (TIEG1 were identified and verified as differentially expressed transcripts in the hippocampus of kindled rats by in situ hybridization and quantitative RT-PCR. In addition, we identified a panel of 16 additional transcripts which included Arc, Egr3/Pilot, Homer1a, Ania-3, MMP9, Narp, c-fos, NGF, BDNF, NT-3, Synaptopodin, Pim1 kinase, TNF-α, RGS2, Egr2/krox-20 and β-A activin that were differentially expressed in the hippocampus of amygdala-kindled rats. The list consists of many synaptic plasticity-related immediate early genes (IEGs as well as some late response genes encoding transcription factors, neurotrophic factors and proteins that are known to regulate synaptic remodelling. In the hippocampus, induction of IEG expression was dependent on the afterdischarge (AD duration. Levetiracetam, 40 mg/kg, suppressed the development of kindling measured as severity of seizures and AD duration. In addition, single animal profiling also showed that levetiracetam attenuated the observed kindling-induced IEG expression; an effect that paralleled the anti-epileptic effect of the drug on AD duration. Conclusions The present study provides mRNA expression data that suggest that levetiracetam attenuates expression of genes known to regulate synaptic remodelling. In the kindled rat, levetiracetam does so by shortening the AD duration thereby reducing the seizure-induced changes in mRNA expression in the hippocampus.

Anticonvulsive evaluation of THIP in the murine pentylenetetrazole kindling model

DEFF Research Database (Denmark)

Simonsen, Charlotte; Boddum, Kim; von Schoubye, Nadia L

2017-01-01

. Evaluation of THIP as a potential anticonvulsant has given contradictory results in different animal models and for this reason, we reevaluated the anticonvulsive properties of THIP in the murine pentylenetetrazole (PTZ) kindling model. As loss of δ-GABAA R in the dentate gyrus has been associated...... the observed upregulation of δ-GABAA Rs. Even in the demonstrated presence of functional δ-GABAA Rs, THIP (0.5-4 mg/kg) showed no anticonvulsive effect in the PTZ kindling model using a comprehensive in vivo evaluation of the anticonvulsive properties....

Effect of lamotrigine, oxcarbazepine and topiramate on cognitive functions and oxidative stress in PTZ-kindled mice.

Science.gov (United States)

Agarwal, Nidhi Bharal; Agarwal, Nitin Kumar; Mediratta, Pramod Kumari; Sharma, Krishna Kishore

2011-04-01

Cognitive impairment is frequently observed in epileptic patients. It has been seen that not only epilepsy but antiepileptic drugs also impair cognitive functions. The present study was undertaken to assess the effect of three anticonvulsants viz. lamotrigine (5mg/kg, p.o.), oxcarbazepine (15mg/kg, p.o.) and topiramate (10mg/kg, p.o.) on cognitive function and oxidative stress during pentylenetetrazole (PTZ)-kindling in mice. Kindling was induced by the administration of PTZ (25mg/kg, i.p.) on every alternate day till 5 weeks. Cognition was assessed after the development of kindling. Elevated plus maze (EPM) and passive avoidance response (PAR) tests were carried out after 24h and 48h of the last PTZ administration. After completion of behavioural tests malondialdehyde (MDA), glutathione levels, superoxide dismutase and catalase activity were measured as an indicator of oxidative stress. The results of the present study indicate that topiramate (10mg/kg) administration to kindled animals increased transfer latency and decreased step-down latency in EPM and PAR tests, respectively. However, lamotrigine and oxcarbazepine did not alter the two parameters. Topiramate administration to kindled as well as non-kindled animals has shown increase in MDA and decrease in glutathione levels. Lamotrigine and oxcarbazepine did not show significant alteration in oxidative stress parameters. To conclude, long term administration of topiramate impairs cognitive functions during experimental epilepsy while lamotrigine and oxcarbazepine are safer. Copyright © 2010 British Epilepsy Association. Published by Elsevier Ltd. All rights reserved.

Ameliorative effect of Asparagus racemosus root extract against pentylenetetrazol-induced kindling and associated depression and memory deficit.

Science.gov (United States)

Pahwa, Priyanka; Goel, Rajesh Kumar

2016-04-01

Asparagus racemosus (A. racemosus) roots are extensively used in traditional medicine for the management of epilepsy. The aim of the present study was to investigate the ameliorative effect of A. racemosus root extract (ARE) against pentylenetetrazol-induced kindling and associated depression and memory deficit. Kindling was successfully induced by repeated administration of a subconvulsant dose of PTZ (35 mg/kg; i.p.) at an interval of 48 ± 2 h in 43 days (21 injections). Pretreatment with valproate (300 mg/kg; i.p.), a major antiepileptic drug as well as ARE significantly suppressed the progression of kindling. Moreover, ARE also ameliorated the kindling-associated depression and memory deficit as indicated by decreased immobility time and increased step-down latency, respectively, as compared to vehicle control animals. Further, these behavioral observations were complemented with analogous neurochemical changes. In conclusion, the results of the present study showed that ARE treatment has an ameliorative effect against PTZ-induced kindling and associated behavioral comorbidities. Copyright © 2016 Elsevier Inc. All rights reserved.

Kindling-induced potentiation of excitatory and inhibitory inputs to hippocampal dentate granule cells. II. Effects of the NMDA antagonist MK-801.

LENUS (Irish Health Repository)

Robinson, G B

1991-10-18

The effect of the non-competitive N-methyl-D-aspartate antagonist MK-801 on the early development of kindling-induced potentiation was examined in the rabbit hippocampal dentate gyrus. MK-801 (0.5 mg\\/kg) was administered 2 h before each daily kindling stimulation was applied to the perforant path. This treatment continued for the first 10 days of kindling. MK-801 depressed the growth of the afterdischarge duration and suppressed development of behavioral seizures. MK-801 did not block kindling-induced potentiation of either the perforant path-dentate granule cell population spike or excitatory postsynaptic potential. Random impulse train stimulation and non-linear systems analytic techniques were used to examine kindling-induced potentiation of presumed GABAergic recurrent inhibitory circuits. Both the magnitude and duration of kindling-induced response inhibition, to the second of each pair of impulses within the train, were reduced in rabbits pretreated with MK-801. These results suggest that MK-801 differentially affects kindling-induced potentiation of excitatory and inhibitory circuits within the rabbit hippocampal dentate gyrus.

The Psychoanalytic Concept of Jouissance and the Kindling Hypothesis.

Science.gov (United States)

Dimitriadis, Yorgos

2017-01-01

This article aims to define the conceptual field of jouissance in Lacanian theory, and put forth the hypothesis of a relationship between certain neurophysiological mechanisms and specific clinical phenomena where jouissance is "kindled" and outside the control of the symbolic process. First, the author briefly introduces Lacan's notion of jouissance and the way it draws on Freud's theorization, and describes the preliminary stages of this conceptual field in Lacan's work. Then, the jouissance related to two other concepts: repetition, with its Freudian and Lacanian nuances, as well as the-exclusively-Lacanian concept of the object petit a . Lacan's later conceptualization of language as jouissance (the notion of lalangue ) is then discussed in relation to Freud's early ideas ("Letter 52") on the different kinds of inscriptions that help form the mental apparatus. Finally, the author tries to formulate a hypothesis regarding specific neurophysiological mechanisms, based on clinical situations where jouissance becomes "kindled" and escapes the control of the symbolic processes through the neurophysiological mechanisms of conditioning, "kindling-sensitization" and "excitotoxicity." In these cases, jouissance can have a destructive effect on the body and can affect, among others organs, the brain-a process the author has previously described heuristically as the "psychosomatic diseases of the brain." This would be a special mechanism of automatism that would be triggered under the specific conditions of the fragility of the signifying chain (foreclosure of the Name-of-the-Father or solidification of the signifying chain) in combination with biological factors, including genetic factors. In this process, signifiers are reduced to signals, which in turn may be reduced to stimuli, with a tendency toward self-perpetuation, while affects are reduced to emotions and moods. Thus, conditioning and kindling-sensitization could also be understood in terms of a "semiotic

How Kindle Could Change the Textbook Market

Science.gov (United States)

Young, Jeffrey R.

2009-01-01

Amazon is subsidizing pilot projects at six institutions--Arizona State, Case Western Reserve, Pace, and Princeton Universities, Reed College, and the University of Virginia's business school. It's picking up half the tab for the experiment on each campus, in which some sections of a few courses will be given the new Kindle DX, as the device is…

Kindled seizures selectively reduce a subpopulation of [3H]quinuclidinyl benzilate binding sites in rat dentate gyrus

International Nuclear Information System (INIS)

Savage, D.D.; McNamara, J.O.

1982-01-01

Amygdala-kindled seizures reduced significantly the total number of [ 3 H]quinuclidinyl benzilate binding sites in both dentate and hippocampal gyri compared to electrode implanted unstimulated controls. Both high and low affinity carbachol displaceable binding site populations were significantly reduced in hippocampal gyrus. By contrast, a selective decline of low affinity sites was found in dentate gyrus membranes. The selectivity of the decline in dentate but not hippocampus gyrus underscores the specificity of this molecular response to amygdala-kindled seizures. We suggest that these receptor alterations underlie adaptive mechanisms which antagonize kindled epileptogenesis

Effectiveness of ketogenic diet in pentylenetetrazol-induced and kindling rats as well as its potential mechanisms.

Science.gov (United States)

Wang, Shan; Ding, Yao; Ding, Xiao-Yan; Liu, Zhi-Rong; Shen, Chun-Hong; Jin, Bo; Guo, Yi; Wang, Shuang; Ding, Mei-Ping

2016-02-12

The effects and mechanisms of ketogenic diets (KD) are unclear. In this study, we aimed to reveal electrographic and behavioral thresholds in responses to the KD in pentylenetetrazol (PTZ)-induced seizures, as well as its antiepileptogenic effects on PTZ-kindling rats. Additionally, we investigated the potential link between KD and expression levels of two cation chloride co-transporters: K(+)-Cl(-) co-transporter 2 (KCC2) and Na(+)-K(+)-Cl(-) co-transporter 1 (NKCC1). The KD group had significantly higher electrographic thresholds than the control (ND) group for the first spike-and-wave, subcontinuous spike-and-wave, high amplitude spike-and-wave, and polyspikes both in the cortex and hippocampus. Compared to the ND group, the KD group had higher behavioral thresholds for behavioral absence, first jerk, first overt myoclonia, and generalized seizures. In the PTZ-kindling model, KD not only prolonged the latency of myoclonic and clonic convulsions, but shortened clonic and generalized duration. In addition, KD rats had higher KCC2 protein expression before kindling, during myoclonic jerks, and GTCS compared with ND rats. There were no significant differences in NKCC1 protein levels between both groups following the four-week dietary intervention without PTZ exposure (before kindling). Moreover, KD inhibited the upregulation of NKCC1 expression induced by kindling in myoclonic jerks and GTCS. Therefore, our findings demonstrated that KD had antiepileptic features in elevating thresholds to most electrographic and behavioral seizure patterns in PTZ-induced rats, as well as delaying the progression and alleviating the severity of seizure in PTZ-kindling model. The antiepileptogenic effects of KD may be attributed to its regulatory properties on KCC2 and NKCC1 protein expression. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Kindled seizures selectively reduce a subpopulation of (/sup 3/H)quinuclidinyl benzilate binding sites in rat dentate gyrus

Energy Technology Data Exchange (ETDEWEB)

Savage, D.D.; McNamara, J.O.

1982-09-01

Amygdala-kindled seizures reduced significantly the total number of (/sup 3/H)quinuclidinyl benzilate binding sites in both dentate and hippocampal gyri compared to electrode implanted unstimulated controls. Both high and low affinity carbachol displaceable binding site populations were significantly reduced in hippocampal gyrus. By contrast, a selective decline of low affinity sites was found in dentate gyrus membranes. The selectivity of the decline in dentate but not hippocampus gyrus underscores the specificity of this molecular response to amygdala-kindled seizures. We suggest that these receptor alterations underlie adaptive mechanisms which antagonize kindled epileptogenesis.

Dynamic study on cerebral perfusion of the pentylenetetrazol kindling cats by SPECT

International Nuclear Information System (INIS)

Hou Min; Liu Xingdang; Wang Kaiyan

2004-01-01

Objective: To learn the change of cerebral perfusion in the pentylenetetrazol kindling cats during the development of epilepsy. Methods: firstly, we performed 12 basic 99m Tc- ethyl cysteinate dimmer (ECD) SPECT as auto-control before the cats were made into epileptic models. Then, according to seizure level of epileptic model, SPECT was performed when the cats began to seizure in the form of facial tic(level 1), nodding spasm (level 2), limb tonic seizures (level 3) and generalized tonic-clonic seizures(level 4). At the same time, we detected the EEG at each level of seizure in order to contrast with SPECT findings. Results:There is no abnormal SPECT finding of cats before using PTZ. The SPECT at each level of kindling: hyperperfusion in forehead and basal ganglia at level 1; more evident hyperperfusion in forehead at level 2; the hyperperfusion in forehead being weakened and another hyperperfusion appearing in deep parietal lobe at level 3; the hyperperfusion in forehead disappearing and the hyperfusion in deep parietal lobe becoming more obvious and a hypoperfusion beside it appearing at level 4. As the time going on, the hyperperfusion disappeared completely and the hypoperfusion became more and more clear. The SPECT findings are coincided with EEG findings. Conclusion: 1. During the kindling of cats, a regional hyperperfusion appeared in the cats' brain: at the stage of focal seizure, the cerebral perfusion increased in forehead and ganglia; at the stage of generalized seizure, the hyperperfusion region gradually moved from forehead to deep parietal lobe. 2. Once the model animal was completely kindled, there would be a fixed hypoperfusion region instead, which may be the epileptic focus. (authors)

Dataset of quantitative spectral EEG of different stages of kindling acquisition in rats.

Science.gov (United States)

Jalilifar, Mostafa; Yadollahpour, Ali

2018-02-01

The data represented here are in relation with the manuscript "Quantitative assessments of extracellular EEG to classify specific features of main phases of seizure acquisition based on kindling model in Rat" (Jalilifar et al., 2017) [1] which quantitatively classified different main stages of the kindling process based on their electrophysiological characteristics using EEG signal processing. The data in the graphical form reported the contribution of different sub bands of EEG in different stages of kindling- induced epileptogenesis. Only EEG signals related to stages 1-2 (initial seizure stages (ISSs)), 3 (localized seizure stage (LSS)), and 4-5 (generalized seizure stages (GSSs) were transferred into frequency function by Fast Fourier Transform (FFT) and their power spectrum and power of each sub bands including delta (1-4 Hz), Theta (4-8 Hz), alpha (8-12 Hz), beta (12-28 Hz), gamma (28-40 Hz) were calculated with MATLAB 2013b. Accordingly, all results were obtained quantitatively which can contribute to reduce the errors in the behavioral assessments.

Anti-epileptogenic and antioxidant effect of Lavandula officinalis aerial part extract against pentylenetetrazol-induced kindling in male mice.

Science.gov (United States)

Rahmati, Batool; Khalili, Mohsen; Roghani, Mehrdad; Ahghari, Parisa

2013-06-21

Repeated application of Lavandula officinalis (L. officinalis) has been recommended for a long time in Iranian traditional medicine for some of nervous disorders like epilepsy and dementia. However, there is no available report for the effect of chronic administration of Lavandula extract in development (acquisition) of epilepsy. Therefore, this study was designed to investigate the anti-epileptogenic and antioxidant activity of repeated administration of Lavandula officinalis extract on pentylenetetrazol (PTZ) kindling seizures in mice model. Lavandula officinalis was tested for its ability (i) to suppress the seizure intensity and lethal effects of PTZ in kindled mice (anti-epileptogenic effect), (ii) to attenuate the PTZ-induced oxidative injury in the brain tissue (antioxidant effect) when given as a pretreatment prior to each PTZ injection during kindling development. Valproate (Val), a major antiepileptic drug, was also tested for comparison. Val and Lavandula officinalis extract showed anti-epileptogenic properties as they reduced seizure score of kindled mice and PTZ-induced mortality. In this regard, Lavandula officinalis was more effective than Val. Both Lavandula officinalis and Val suppressed brain nitric oxide (NO) level of kindled mice in comparison with the control and PTZ group. Meanwhile, Lavandula officinalis suppressed NO level more than Val and Lavandula officinalis also decreased brain MDA level relative to PTZ group. This is the first report to demonstrate NO suppressing and anti-epileptogenic effect of chronic administration of Lavandula officinalis extract on acquisition of epilepsy in PTZ kindling mice model. In this regard, Lavandula officinalis extract was more effective than Val, possibly and in part via brain NO suppression. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Hippocampal kindling alters the concentration of glial fibrillary acidic protein and other marker proteins in rat brain

DEFF Research Database (Denmark)

Hansen, A; Jørgensen, Ole Steen; Bolwig, T G

1990-01-01

The effect of hippocampal kindling on neuronal and glial marker proteins was studied in the rat by immunochemical methods. In hippocampus, pyriform cortex and amygdala there was an increase in glial fibrillary acidic protein (GFAP), indicating reactive gliosis, and an increase in the glycolytic...... enzyme NSE, suggesting increased anaerobic metabolism. Neuronal cell adhesion molecule (NCAM) decreased in pyriform cortex and amygdala of kindled rats, indicating neuronal degeneration....

Kindling: The Amazon e-Reader as an Educational Tool

Science.gov (United States)

Brezicki, Colin

2011-01-01

The revolutionary electronic reading device, Amazon's Kindle, is already obsolete. Such is the breakneck speed of technology that the machine touted to spell the death of printed books is already heading for the scrap heap, replaced by e-readers like the iPad that access the Internet, make phone calls, download movies, and connect users with all…

Involvement of over-expressed BMP4 in pentylenetetrazol kindling-induced cell proliferation in the dentate gyrus of adult rats

International Nuclear Information System (INIS)

Yin Jinbo; Ma Yuxin; Yin Qing; Xu Haiwei; An Ning; Liu Shiyong; Fan Xiaotang; Yang Hui

2007-01-01

The dentate gyrus (DG) of the hippocampus is one of a few regions in the adult mammalian brain characterized by ongoing neurogenesis. Proliferation of neural precursors in the granule cell layer of the DG has been identified in pentylenetetrazol (PTZ) kindling epilepsy model, however, little is known about the molecular mechanism. We previously reported that the expression pattern of bone morphogenetic proteins-4 (BMP4) mRNA in the hippocampus was developmentally regulated and mainly localized in the DG of the adult. To explore the role of BMP4 in epileptic activity, we detected BMP4 expression in the DG during PTZ kindling process and explore its correlation with cell proliferation combined with bromodeoxyuridine (BrdU) labeling technique. We found that dynamic changes in BMP4 level and BrdU labeled cells dependent on the kindling stage of PTZ induced seizure-prone state. The number of BMP4 mRNA-positive cells and BrdU labeled cells reached the top level 1 day after PTZ kindled, then declined to base level 2 months later. Furthermore, there was a significant correlation between increased BMP4 mRNA expression and increased number of BrdU labeled cells. After effectively blocked expression of BMP4 with antisense oligodeoxynucleotides(ASODN), the BrdU labeled cells in the dentate gyrus subgranular zone(DG-SGZ) and hilus were significantly decreased 16d after First PTZ injection and 1, 3, 7, 14d after kindled respectively. These findings suggest that increased proliferation in the DG of the hippocampus resulted from kindling epilepsy elicited by PTZ maybe be modulated by BMP4 over-expression

Postictal in situ MRS brain lactate in the rat kindling model.

Science.gov (United States)

Maton, B M; Najm, I M; Wang, Y; Lüders, H O; Ng, T C

1999-12-10

To determine the temporal and spatial extent of the lactate (Lact) changes as correlated with seizure characteristics and EEG changes in the rat kindling model. Prior studies using MRS have detected cerebral Lact postictally in animal models of seizures and in patients with intractable focal epilepsy. We performed MRS in sham control rats (n = 4) and in rats stimulated in the right hippocampus at two different stages of the kindling and at three time points after the seizures: 3 hours (n = 4 and 2). Lact/creatine (Cr) and N-acetylaspartate (NAA)/Cr ratios were measured in six contiguous voxels (three left, three right) covering the hippocampi, anterior and posterior regions, and compared with EEG and ictal behavior. Lact/Cr ratios were measured at a very low level in the sham control rats and in the >3-hour group. In the epilepsy.

Improvement in hippocampal kindling analysis through computational processing data Aprimorando a análise do modelo de kindling hipocampal com o auxílio de processamento computacional

Directory of Open Access Journals (Sweden)

Joacir Graciolli Cordeiro

2009-09-01

Full Text Available The kindling phenomenon is classically investigated in epileptology research. The present study aims to provide further information about hippocampal kindling through computational processing data. Adult Wistar rats were implanted with dorsal hippocampal and frontal neocortical electrodes to perform the experiment. The processing data was obtained using the Spike2 and Matlab softwares. An inverse relationship between the number of "wet dog shakes" and the Racine's motor stages development was found. Moreover it was observed a significant increase in the afterdischarge (AD duration and its frequency content. The highest frequencies were, however, only reached at the beginning of behavioral seizures. During the primary AD, fast transients (ripples were registered in both hippocampi superimposed to slower waves. This experiment highlights the usefulness of computational processing applied to animal models of temporal lobe epilepsy and supports a relevant role of the high frequency discharges in temporal epileptogenesis.O fenômeno de kindling é classicamente utilizado no campo da epileptologia experimental. Este trabalho objetiva aprofundar a análise do modelo kindling hipocampal através de processamento computacional. Ratos wistar adultos receberam eletrodos hipocampais dorsais e neocorticais frontais para a realização do experimento. O processamento dos dados encontrados foi realizado pelos softwares Matlab e Spike2. Encontrou-se uma relação inversa entre wet dog shakes e o desenvolvimento dos estágios motores de Racine. A duração e o conteúdo de freqüência das pós-descargas hipocampais aumentaram durante o processo, sendo observadas descargas de alta freqüência (ripples em ambos os hipocampos durante as pós-descargas primárias, superimpostas a ondas lentas. As mais altas freqüências, entretanto, foram apenas atingidas com o início das crises epilépticas. A utilização de sistemas computacionais para a confecção e an

Impaired recruitment of seizure-generated neurons into functional memory networks of the adult dentate gyrus following long-term amygdala kindling.

Science.gov (United States)

Fournier, Neil M; Botterill, Justin J; Marks, Wendie N; Guskjolen, Axel J; Kalynchuk, Lisa E

2013-06-01

Epileptic seizures increase the birth of new neurons in the adult hippocampus. Although the consequences of aberrant neurogenesis on behavior are not fully understood, one hypothesis is that seizure-generated neurons might form faulty circuits that disrupt hippocampal functions, such as learning and memory. In the present study, we employed long-term amygdala kindling (i.e., rats receive 99-electrical stimulations) to examine the effect of repeated seizures on hippocampal neurogenesis and behavior. We labeled seizure-generated cells with the proliferation marker BrdU after 30-stimulations and continued kindling for an additional 4weeks to allow newborn neurons to mature under conditions of repeated seizures. After kindling was complete, rats were tested in a trace fear conditioning task and sacrificed 2h later to examine if 4-week old newborn cells were recruited into circuits involved in the retrieval of emotional memory. Compared to non-kindled controls, long-term kindled rats showed significant impairments in fear memory reflected in a decrease in conditioned freezing to both tone and contextual cues during testing. Moreover, long-term kindling also prevented the activation of 4-week old newborn cells in response to fear memory retrieval. These results indicate that the presence of seizure activity during cell maturation impedes the ability of new neurons to integrate properly into circuits important in memory formation. Together, our findings suggest that aberrant seizure-induced neurogenesis might contribute to the development of learning impairments in chronic epilepsy and raise the possibility that targeting the reduced activation of adult born neurons could represent a beneficial strategy to reverse cognitive deficits in some epileptic patients. Copyright © 2012 Elsevier Inc. All rights reserved.

Kindling of Life Stress in Bipolar Disorder: Effects of Early Adversity.

Science.gov (United States)

Shapero, Benjamin G; Weiss, Rachel B; Burke, Taylor A; Boland, Elaine M; Abramson, Lyn Y; Alloy, Lauren B

2017-05-01

Most theoretical frameworks regarding the role of life stress in bipolar disorders (BD) do not incorporate the possibility of a changing relationship between psychosocial context and episode initiation across the course of the disorder. The kindling hypothesis theorizes that over the longitudinal course of recurrent affective disorders, the relationship between major life stressors and episode initiation declines (Post, 1992). The present study aimed to test an extension of the kindling hypothesis in BD by examining the effect of early life adversity on the relationship between proximal life events and prospectively assessed mood episodes. Data from 145 bipolar participants (59.3% female, 75.2% Caucasian, and mean age of 20.19 years; SD = 1.75 years) were collected as part of the Temple-Wisconsin Longitudinal Investigation of Bipolar Spectrum Project (112 Bipolar II; 33 Cyclothymic disorder). Participants completed a self-report measure of early adversity at baseline and interview-assessed mood episodes and life events at regular 4-month follow-ups. Results indicate that early childhood adversity sensitized bipolar participants to the effects of recent stressors only for depressive episodes and not hypomanic episodes within BD. This was particularly the case with minor negative events. The current study extends prior research examining the kindling model in BD using a methodologically rigorous assessment of life stressors and mood episode occurrence. Clinicians should assess experiences of early adversity in individuals with BD as it may impact reactivity to developing depressive episodes in response to future stressors. Copyright © 2017. Published by Elsevier Ltd.

Behavioral and electrographic effects of opioids on kindled seizures in rats.

Science.gov (United States)

Caldecott-Hazard, S; Shavit, Y; Ackermann, R F; Engel, J; Frederickson, R C; Liebeskind, J C

1982-11-18

Our laboratory previously suggested that opioid peptides are released by an amygdaloid kindled seizure and may affect the elicitation of a subsequent seizure. The present study examined the effects of morphine, naloxone, enkephalin analogues, and conditions of morphine tolerance and withdrawal on the severity and duration of a series of amygdaloid kindled seizures. The results suggest two distinct opiate/opioid actions on seizures. The first is an anticonvulsant effect on the behavioral manifestations of seizures. This effect is seen following a high dose (50 mg/kg) of morphine or a low dose (6 mg/kg) of enkephalin analogue (LY146104), and is reversed by naloxone. The second is a naloxone-reversible prolonging effect of the high dose of morphine on the electrographic components of the seizures. Receptor affinities of these various opiate/opioid drugs suggest that these two actions are mediated by different receptors which appear not to include high affinity mu receptors.

A new rapid kindling variant for induction of cortical epileptogenesis in freely moving rats

Directory of Open Access Journals (Sweden)

Juan Carlos Morales

2014-07-01

Full Text Available Kindling, one of the most used models of experimental epilepsy is based on daily electrical stimulation in several brain structures. Unlike the classic or slow kindling protocols (SK, the rapid kindling types (RK described until now require continuous stimulation at suprathreshold intensities applied directly to the same brain structure used for subsequent electrophysiological and inmunohistochemical studies, usually the hippocampus. However, the cellular changes observed in these rapid protocols, such as astrogliosis and neuronal loss, could be due to experimental manipulation more than to epileptogenesis-related alterations. Here, we developed a new RK protocol in order to generate an improved model of temporal lobe epilepsy (TLE which allows gradual progression of the epilepsy as well as obtaining an epileptic hippocampus, thus avoiding direct surgical manipulation and electric stimulation over this structure. This new protocol consists of basolateral amygdala (BLA stimulation with 10 trains of biphasic pulses (10s;50Hz per day with 20 minutes-intervals, during 3 consecutive days, using a subconvulsive and subthreshold intensity, which guarantees tissue integrity. The progression of epileptic activity was evaluated in freely moving rats through EEG recordings from cortex and amygdala, accompanied with synchronized video recordings. Moreover, we assessed the effectiveness of RK protocol and the establishment of epilepsy by evaluating cellular alterations of hippocampal slices from kindled rats. RK protocol induced convulsive states similar to SK protocols but in 3 days, with persistently lowered threshold to seizure induction and epileptogenic-dependent cellular changes in amygdala projection areas. We concluded that this novel RK protocol introduces a new variant of the chronic epileptogenesis models in freely moving rats, which is faster, highly reproducible and causes minimum cell damage with respect to that observed in other experimental

The antiepileptic activity of Vitex agnus castus extract on amygdala kindled seizures in male rats.

Science.gov (United States)

Saberi, Mehdi; Rezvanizadeh, Alireza; Bakhtiarian, Azam

2008-08-22

The antiepileptic activity of hydrophilic extract of Vitex agnus castus fruit (Vitex) was evaluated by the kindling model of epilepsy. Intact male rats (250-300 g) were stereotaxically implanted with a tripolar and two monopolar electrodes in amygdala and dura, respectively. The afterdischarge (AD) threshold was determined in each animal and stimulated daily until fully kindled. The animals were administered different doses (60, 120 or 180 mg/kg) of Vitex or 0.1 ml of hydro alcoholic solvent intra-peritoneally (i.p.) and kindling parameters including AD threshold, seizure stages (SS), afterdischarge duration (ADD), stage 4 latency (S4L) and stage 5 duration (S5D) were recorded 30 min post-injection. The obtained data showed that even low dose (60 mg/kg) of Vitex could significantly increase the AD threshold and decrease the ADD and S5D (PVitex at the dose of 120 mg/kg, induced significant increment in S4L (PVitex can reduce or prevent epileptic activity as demonstrated by reduction of ADD and S5D (length of convulsion) in a dose dependent manner. In conclusion, Vitex at appropriate dose can probably reduce or control epileptic activities.

The effect of PTZ-induced epileptic seizures on hippocampal expression of PSA-NCAM in offspring born to kindled rats

Directory of Open Access Journals (Sweden)

Rajabzadeh Aliakbar

2012-05-01

Full Text Available Abstract Background Maternal epileptic seizures during pregnancy can affect the hippocampal neurons in the offspring. The polysialylated neural cell adhesion molecule (PSA-NCAM, which is expressed in the developing central nervous system, may play important roles in neuronal migration, synaptogenesis, and axonal outgrowth. This study was designed to assess the effects of kindling either with or without maternal seizures on hippocampal PSA-NCAM expression in rat offspring. Methods Forty timed-pregnant Wistar rats were divided into four groups: A Kind+/Seiz+, pregnant kindled (induced two weeks prior to pregnancy rats that received repeated intraperitoneal (i.p. pentylenetetrazol, PTZ injections on gestational days (GD 14-19; B Kind-/Seiz+, pregnant non-kindled rats that received PTZ injections on GD14-GD19; C Kind+/Seiz-, pregnant kindled rats that did not receive any PTZ injections; and D Kind-/Seiz-, the sham controls. Following birth, the pups were sacrificed on PD1 and PD14, and PSA-NCAM expression and localization in neonates’ hippocampi were analyzed by Western blots and immunohistochemistry. Results Our data show a significant down regulation of hippocampal PSA-NCAM expression in the offspring of Kind+/Seiz+ (p = 0.001 and Kind-/Seiz+ (p = 0.001 groups compared to the sham control group. The PSA-NCAM immunoreactivity was markedly decreased in all parts of the hippocampus, especially in the CA3 region, in Kind+/Seiz+ (p = 0.007 and Kind-/Seiz+ (p = 0.007 group’s newborns on both PD1 and 14. Conclusion Our findings demonstrate that maternal seizures but not kindling influence the expression of PSA-NCAM in the offspring’s hippocampi, which may be considered as a factor for learning/memory and cognitive impairments reported in children born to epileptic mothers.

Inter- and intraobserver agreement of seizure behavior scoring in the amygdala kindled rat

NARCIS (Netherlands)

Groot, L.J.J.; Gosens, N.; Vles, J.S.H.; Hoogland, G.; Aldenkamp, Albert; Rouhl, Rob P W

2015-01-01

Introduction: The Racine scale is a 5-point seizure behavior scoring paradigm used in the amygdala kindled rat. Though this scale has been applied widely in experimental epilepsy research, studies of reproducibility are rare. The aim of the current study was, therefore, to assess its interobserver

Comparative studies on the effects of clinically used anticonvulsants on the oxidative stress biomarkers in pentylenetetrazole-induced kindling model of epileptogenesis in mice.

Science.gov (United States)

Mazhar, Faizan; Malhi, Saima M; Simjee, Shabana U

2017-01-01

Oxidative stress plays a key role in the pathogenesis of epilepsy and contributes in underlying epileptogenesis process. Anticonvulsant drugs targeting the oxidative stress domain of epileptogenesis may provide better control of seizure. The present study was carried out to investigate the effect of clinically used anti-epileptic drugs (AEDs) on the course of pentylenetetrazole (PTZ)-induced kindling and oxidative stress markers in mice. Six mechanistically heterogeneous anticonvulsants: phenobarbital, phenytoin, levetiracetam, pregabalin, topiramate, and felbamate were selected and their redox profiles were determined. Diazepam was used as a drug control for comparison. Kindling was induced by repeated injections of a sub-convulsive dose of PTZ (50 mg/kg, s.c.) on alternate days until seizure score 5 was evoked in the control kindled group. Anticonvulsants were administered daily. Following PTZ kindling, oxidative stress biomarkers were assessed in homogenized whole brain samples and estimated for the levels of nitric oxide, peroxide, malondialdehyde, protein carbonyl, reduced glutathione, and activities of nitric oxide synthase and superoxide dismutase. Biochemical analysis revealed a significant increase in the levels of reactive oxygen species with a parallel decrease in endogenous anti-oxidants in PTZ-kindled control animals. Daily treatment with levetiracetam and felbamate significantly decreased the PTZ-induced seizure score as well as the levels of nitric oxide (panticonvulsant effect by the diversified mechanism of action such as levetiracetam, felbamate, and topiramate exhibited superior anti-oxidative stress activity in addition to their anticonvulsant activity.

Low-frequency electrical stimulation enhances the effectiveness of phenobarbital on GABAergic currents in hippocampal slices of kindled rats.

Science.gov (United States)

Asgari, Azam; Semnanian, Saeed; Atapour, Nafiseh; Shojaei, Amir; Moradi-Chameh, Homeira; Ghafouri, Samireh; Sheibani, Vahid; Mirnajafi-Zadeh, Javad

2016-08-25

Low frequency stimulation (LFS) has been proposed as a new approach in the treatment of epilepsy. The anticonvulsant mechanism of LFS may be through its effect on GABAA receptors, which are the main target of phenobarbital anticonvulsant action. We supposed that co-application of LFS and phenobarbital may increase the efficacy of phenobarbital. Therefore, the interaction of LFS and phenobarbital on GABAergic inhibitory post-synaptic currents (IPSCs) in kindled and control rats was investigated. Animals were kindled by electrical stimulation of basolateral amygdala in a semi rapid manner (12 stimulations/day). The effect of phenobarbital, LFS and phenobarbital+LFS was investigated on GABAA-mediated evoked and miniature IPSCs in the hippocampal brain slices in control and fully kindled animals. Phenobarbital and LFS had positive interaction on GABAergic currents. In vitro co-application of an ineffective pattern of LFS (100 pulses at afterdischarge threshold intensity) and a sub-threshold dose of phenobarbital (100μM) which had no significant effect on GABAergic currents alone, increased the amplitude and area under curve of GABAergic currents in CA1 pyramidal neurons of hippocampal slices significantly. Interestingly, the sub-threshold dose of phenobarbital potentiated the GABAergic currents when applied on the hippocampal slices of kindled animals which received LFS in vivo. Post-synaptic mechanisms may be involved in observed interactions. Obtained results implied a positive interaction between LFS and phenobarbital through GABAA currents. It may be suggested that a combined therapy of phenobarbital and LFS may be a useful manner for reinforcing the anticonvulsant action of phenobarbital. Copyright © 2016 IBRO. Published by Elsevier Ltd. All rights reserved.

Anxiolytic and antidepressive effects of electric stimulation of the paleocerebellar cortex in pentylenetetrazol kindled rats

NARCIS (Netherlands)

Godlevsky, L.S.; Muratova, T.N.; Kresyun, N.V.; Luijtelaar, E.L.J.M. van; Coenen, A.M.L.

2014-01-01

Anxiety and depression are component of interictal behavioral deteriorations that occur as a consequence of kindling, a procedure to induce chronic epilepsy. The aim of this study was to evaluate the possible effects of electrical stimulation (ES) of paleocerebellar cortex on anxiety and

Developmental Exposure to an Environmental PCB Mixture Delays the Propagation of Kindling in the Amygdala

Science.gov (United States)

Developmental PCB exposure impairs hearing and induces brainstem audiogenic seizures in adult offspring. The degree to which this enhanced susceptibility to seizure is manifest in other brain regions has not been examined. Thus, electrical kindling of the amygdala was used to eva...

Inducible cAMP early repressor acts as a negative regulator for kindling epileptogenesis and long-term fear memory.

Science.gov (United States)

Kojima, Nobuhiko; Borlikova, Gilyana; Sakamoto, Toshiro; Yamada, Kazuyuki; Ikeda, Toshio; Itohara, Shigeyoshi; Niki, Hiroaki; Endo, Shogo

2008-06-18

Long-lasting neuronal plasticity as well as long-term memory (LTM) requires de novo synthesis of proteins through dynamic regulation of gene expression. cAMP-responsive element (CRE)-mediated gene transcription occurs in an activity-dependent manner and plays a pivotal role in neuronal plasticity and LTM in a variety of species. To study the physiological role of inducible cAMP early repressor (ICER), a CRE-mediated gene transcription repressor, in neuronal plasticity and LTM, we generated two types of ICER mutant mice: ICER-overexpressing (OE) mice and ICER-specific knock-out (KO) mice. Both ICER-OE and ICER-KO mice show no apparent abnormalities in their development and reproduction. A comprehensive battery of behavioral tests revealed no robust changes in locomotor activity, sensory and motor functions, and emotional responses in the mutant mice. However, long-term conditioned fear memory was attenuated in ICER-OE mice and enhanced in ICER-KO mice without concurrent changes in short-term fear memory. Furthermore, ICER-OE mice exhibited retardation of kindling development, whereas ICER-KO mice exhibited acceleration of kindling. These results strongly suggest that ICER negatively regulates the neuronal processes required for long-term fear memory and neuronal plasticity underlying kindling epileptogenesis, possibly through suppression of CRE-mediated gene transcription.

Comparison of benzodiazepine receptor and regional cerebral blood flow imagings of epileptiform foci in hippocampal kindled rabbits

International Nuclear Information System (INIS)

Kurokawa, Kenzo

1993-01-01

To compare the benzodiazepine (Bz) receptor imaging and regional cerebral blood flow (rCBF) imaging in the detection of epileptic foci, the distribution pattern of the Bz receptor and rCBF in hippocampal kindled rabbits was examined by a double tracer autoradiography using ethyl 7-[ 125 I]-5,6-dihydro-5-methyl-6-oxo-4H-imidazo [1, 5-a][1,4] benzodiazepine-3-carboxylate ( 125 I-Ro 16-0154) and 99m Tc-hexamethyl-propyleneamine oxime ( 99m Tc-HMPAO). In visual and quantitative analyses, 125 I-Ro 16-0154 accumulation in brain slices extracted after the completion of the kindling was markedly and extensively decreased in the kindled CA1 region mimicking a primary epileptic focus. 125 I-Ro 16-0154 accumulation was moderately decreased in the ipsilateral temporal lobe, dentate gyrus, CA2, CA4, and bilateral CA3 regions, regarded as the propagated sites of seizure discharges. 99m Tc-HMPAO accumulation was found to be decreased in the ipsilateral CA1, frontal, temporal and dentate gyri. However, the decrease was much more slight and less extensive than that in 125 I-Ro 16-0154 accumulation. These results suggest that Bz receptor imaging is much more sensitive in the detection of epileptic foci than rCBF imaging, and therefore that Bz receptor imaging is useful in clinical epilepsy. (author)

A Transient Upregulation of Glutamine Synthetase in the Dentate Gyrus Is Involved in Epileptogenesis Induced by Amygdala Kindling in the Rat.

Directory of Open Access Journals (Sweden)

Hong-Liu Sun

Full Text Available Reduction of glutamine synthetase (GS function is closely related to established epilepsy, but little is known regarding its role in epileptogenesis. The present study aimed to elucidate the functional changes of GS in the brain and its involvement in epileptogenesis using the amygdala kindling model of epilepsy induced by daily electrical stimulation of basolateral amygdala in rats. Both expression and activity of GS in the ipsilateral dentate gyrus (DG were upregulated when kindled seizures progressed to stage 4. A single dose of L-methionine sulfoximine (MSO, in 2 µl, a selective GS inhibitor, was administered into the ipsilateral DG on the third day following the first stage 3 seizure (just before GS was upregulated. It was found that low doses of MSO (5 or 10 µg significantly and dose-dependently reduced the severity of and susceptibility to evoked seizures, whereas MSO at a high dose (20 µg aggravated kindled seizures. In animals that seizure acquisition had been successfully suppressed with 10 µg MSO, GS upregulation reoccurred when seizures re-progressed to stage 4 and re-administration of 10 µg MSO consistently reduced the seizures. GLN at a dose of 1.5 µg abolished the alleviative effect of 10 µg MSO and deleterious effect of 20 µg MSO on kindled seizures. Moreover, appropriate artificial microRNA interference (1 and 1.5×10(6 TU/2 µl of GS expression in the ipsilateral DG also inhibited seizure progression. In addition, a transient increase of GS expression and activity in the cortex was also observed during epileptogenesis evoked by pentylenetetrazole kindling. These results strongly suggest that a transient and region-specific upregulation of GS function occurs when epilepsy develops into a certain stage and eventually promotes the process of epileptogenesis. Inhibition of GS to an adequate degree and at an appropriate timing may be a potential therapeutic approach to interrupting epileptogenesis.

Pre-weaning growth performance of kits of a local Algerian rabbit population: influence of dam coat color, parity and kindling season

Directory of Open Access Journals (Sweden)

O. Abdelli-Larbi

2014-09-01

Full Text Available This study evaluated the effect of dam coat colours, doe’s parity order, year and kindling season on litter size and growth of suckling kits of a local Algerian rabbit population. Rabbits were reared in the rabbitry of Tizi Ouzou (Algeria in wire mesh cages placed in a building with natural lighting and ventilation and absence of temperature regulation. Weights and size of 572 litters (3795 kits at birth, 7, 14, 21 and 28 d were analysed. The mother’s coat colours (2 levels only: albino or coloured coat, the doe’s parity (1, 2, 3, 4-5, 6-8, ≥9 kindlings, the kindling year (4 consecutive years and the kindling season (3 seasons: Feb-May, June-Sept and Oct-Jan, were used as main fixed factors in a factorial analysis. The population was characterised by an average individual weight of 54 g at birth and 404 g at 30 d, growth rate of 10.24 g/d between birth and 24 d and of 19.02 g/d between 24 and 30 d. The coloured females were more prolific than the albino ones: 5.59 vs. 5.09 weaned/litter (P=0.016; but kits born from albino does had a larger individual weight at weaning: 391 vs. 362 g (P=0.006. The doe’s parity order had no significant influence on the litter weight, individual weight or litter size at kindling. However, it influenced litter weight and litter size from 7 d of age up to 28 d in favour of 2nd and 3rd parity (P<0.02. Litter size was not significantly affected by year of kindling at any considered age. On the contrary, year of birth greatly influenced litter and individual weights. For example, the difference in individual weights at 28 d between the best and the worst year represented 19% of the average weight at this age. The birth season influenced mainly (P<0.001 litter size from birth until weaning in favour of the spring season: 5.92 weaned/litter vs. 5.05 or 5.04 for the 2 other seasons. From day 7 until weaning, the litter weight was larger for the Feb-May season (P<0.02 and represented +0.87 grams

[The role of the opiate mechanisms of the hippocampus and substantia nigra in the behavioral and convulsive disorders in picrotoxin-induced kindling].

Science.gov (United States)

Kryzhanovskiĭ, G N; Shandra, A A; Godlevskiĭ, L S; Mazarati, A M; Nguyen, T T

1991-03-01

It was shown in the experiments on rats that the repeated picrotoxin administration resulted in the kindling of generalized seizures. Generalized convulsions were followed by the development of either postictal depression or explosiveness. The injection of mu-opiate agonist met-enkephalin into hippocampus of kindled rats resulted in the increase in the severity of seizure reactions which were induced by picrotoxin and also in the increase in the number of animals with postictal explosiveness. The injection of dynorphin-A-1-13 (kappa-opiate agonist) into substantia nigra reticulata induced the locomotor depression which was like one in postictal period and resulted in the decrease of picrotoxin-induced seizures severity. It was concluded that mu-opiate system of hippocampus took part in the formation of generator of pathologically enhanced excitation in the structure during kindling and the development of seizure syndrome, providing also the postictal explosiveness. Kappa-opiate system of substantia nigra plays an important role in the activation of the antiepileptic system, limitation of seizures and the development of postictal depression.

Measurement equivalence of the KINDL questionnaire across child self-reports and parent proxy-reports: a comparison between item response theory and ordinal logistic regression.

Science.gov (United States)

Jafari, Peyman; Sharafi, Zahra; Bagheri, Zahra; Shalileh, Sara

2014-06-01

Measurement equivalence is a necessary assumption for meaningful comparison of pediatric quality of life rated by children and parents. In this study, differential item functioning (DIF) analysis is used to examine whether children and their parents respond consistently to the items in the KINDer Lebensqualitätsfragebogen (KINDL; in German, Children Quality of Life Questionnaire). Two DIF detection methods, graded response model (GRM) and ordinal logistic regression (OLR), were applied for comparability. The KINDL was completed by 1,086 school children and 1,061 of their parents. While the GRM revealed that 12 out of the 24 items were flagged with DIF, the OLR identified 14 out of the 24 items with DIF. Seven items with DIF and five items without DIF were common across the two methods, yielding a total agreement rate of 50 %. This study revealed that parent proxy-reports cannot be used as a substitute for a child's ratings in the KINDL.

Self-reported health-related quality of life in kindergarten children : psychometric properties of the Kiddy-KINDL

NARCIS (Netherlands)

Villalonga-Olives, E.; Kiese-Himmel, C.; Witte, C.; Almansa, J.; Dusilova, I.; Hacker, K.; von Steinbuechel, N.

Objectives: To assess the psychometric properties of the German self-reported version of the Kiddy-KINDL that measures Health Related Quality of Life (HRQoL) in 3 to 5 year old kindergarten children. Study design: The population of the study comprised baseline data of a longitudinal study whose main

Coupling chemical and biological catalysis: a flexible paradigm for producing biobased chemicals.

Science.gov (United States)

Schwartz, Thomas J; Shanks, Brent H; Dumesic, James A

2016-04-01

Advances in metabolic engineering have allowed for the development of new biological catalysts capable of selectively de-functionalizing biomass to yield platform molecules that can be upgraded to biobased chemicals using high efficiency continuous processing allowed by heterogeneous chemical catalysis. Coupling these disciplines overcomes the difficulties of selectively activating COH bonds by heterogeneous chemical catalysis and producing petroleum analogues by biological catalysis. We show that carboxylic acids, pyrones, and alcohols are highly flexible platforms that can be used to produce biobased chemicals by this approach. More generally, we suggest that molecules with three distinct functionalities may represent a practical upper limit on the extent of functionality present in the platform molecules that serve as the bridge between biological and chemical catalysis. Copyright © 2016 Elsevier Ltd. All rights reserved.

The role of GABAA receptor activity in post-ictal depression period in a rat kindling model of epilepsy

Directory of Open Access Journals (Sweden)

Javad Mirnajafi-Zadeh

2009-02-01

Full Text Available Introduction: Following the seizure there is an inhibitory period named “post-ictal depressionperiod” which has a depressing effect on the following seizure. In this study, the role of GABAAreceptors on post-ictal depression period was investigated in amygdala kindling model of epilepsy inrat.Materials and Methods: Animals were kindled by electrical stimulation of amygdala. Then, theywere divided into four groups. Different groups of kindled animals were received a second stimulationat 10, 30, 60 and 90 min after the first stimulation and the percentage of suppression of seizureparameters after the second stimulation was calculated. In another four groups, bicucullin, a selectiveGABAA receptor antagonist (100 nM, was intra-cerebroventricularly microinjected 10 min before thesecond stimulation and its effect on the percentage of suppression induced by the first stimulation wasinvestigated. Six animals were used in each group.Results: When the second stimulation was applied at 10 and 30 min after the first stimulation asignificant reduction was observed in the seizure severity and seizure parameters were depressed afterthe second stimulation. Bicucullin microinjection significantly decreased the percentage of depressionin seizure parameters following the second stimulation compared to the animals received the solventalone (P<0.05. This decrease was significant when the second stimulation was applied at 10 and 30min after the first stimulation.Conclusion: Obtained results showed that activity of GABAA receptors by endogenous GABA isone of the mechanisms involved in post-ictal depressing period. However, the blocking of thesereceptors could not completely prevent this period. Thus, other factors have also role in its induction.

IPhone or Kindle: Competition of Electronic Books Sales

Science.gov (United States)

Chen, Li

With the technical development of the reading equipment, e-books have witnessed a gradual and steady increase in sales in recent years. Last year, smart phones announced to be able to perform additional functions as e-book reading devices, making it possible for retailers selling e-books for smart phones (SPR) such as iPhone to differentiate with those selling e-books for specific reading equipment (SER) such as Amazon Kindle. We develop a game theory model to examine the competition between SER and SPR retailers. We derive the equilibrium price and analyze the factors that affect equilibrium outcomes under both scenarios of complete and incomplete information. Our results suggest that reduced cost due to inconvenience of reading e-books over iPhone lowers equilibrium prices, and reduced cost of specific reading equipment leads to more intense price competition. Under information asymmetry, we show that SER retailers will increase the price at equilibrium.

Physico-chemical analyses and corrosion effect of produced water ...

African Journals Online (AJOL)

Physico-chemical characteristics of the composite produced water sample used for the study has a higher concentration compared with DPR standard for discharge of produced formation water into surface environment. It was assumed that the corrosion of the coupons was due to presence of high chemical matters in the ...

Developmental exposure to an environmental PCB mixture delays the propagation of electrical kindling from the amygdala.

Science.gov (United States)

Bandara, Suren B; Sadowski, Renee N; Schantz, Susan L; Gilbert, Mary E

2017-01-01

Developmental PCB exposure impairs hearing and induces brainstem audiogenic seizures in adult offspring. The degree to which this enhanced susceptibility to seizure is manifest in other brain regions has not been examined. Thus, electrical kindling of the amygdala was used to evaluate the effect of developmental exposure to an environmentally relevant PCB mixture on seizure susceptibility in the rat. Female Long-Evans rats were dosed orally with 0 or 6mg/kg/day of the PCB mixture dissolved in corn oil vehicle 4 weeks prior to mating and continued through gestation and up until postnatal day (PND) 21. On PND 21, pups were weaned, and two males from each litter were randomly selected for the kindling study. As adults, the male rats were implanted bilaterally with electrodes in the basolateral amygdala. For each animal, afterdischarge (AD) thresholds in the amygdala were determined on the first day of testing followed by once daily stimulation at a standard 200μA stimulus intensity until three stage 5 generalized seizures (GS) ensued. Developmental PCB exposure did not affect the AD threshold or total cumulative AD duration, but PCB exposure did increase the latency to behavioral manifestations of seizure propagation. PCB exposed animals required significantly more stimulations to reach stage 2 seizures compared to control animals, indicating attenuated focal (amygdala) excitability. A delay in kindling progression in the amygdala stands in contrast to our previous finding of increased susceptibility to brainstem-mediated audiogenic seizures in PCB-exposed animals in response to a an intense auditory stimulus. These seemingly divergent results are not unexpected given the distinct source, type, and mechanistic underpinnings of these different seizure models. A delay in epileptogenesis following focal amygdala stimulation may reflect a decrease in neuroplasticity following developmental PCB exposure consistent with reductions in use-dependent synaptic plasticity that

The Psychoanalytic Concept of Jouissance and the Kindling Hypothesis

Directory of Open Access Journals (Sweden)

Yorgos Dimitriadis

2017-09-01

Full Text Available This article aims to define the conceptual field of jouissance in Lacanian theory, and put forth the hypothesis of a relationship between certain neurophysiological mechanisms and specific clinical phenomena where jouissance is “kindled” and outside the control of the symbolic process. First, the author briefly introduces Lacan's notion of jouissance and the way it draws on Freud's theorization, and describes the preliminary stages of this conceptual field in Lacan's work. Then, the jouissance related to two other concepts: repetition, with its Freudian and Lacanian nuances, as well as the—exclusively—Lacanian concept of the object petit a. Lacan's later conceptualization of language as jouissance (the notion of lalangue is then discussed in relation to Freud's early ideas (“Letter 52” on the different kinds of inscriptions that help form the mental apparatus. Finally, the author tries to formulate a hypothesis regarding specific neurophysiological mechanisms, based on clinical situations where jouissance becomes “kindled” and escapes the control of the symbolic processes through the neurophysiological mechanisms of conditioning, “kindling-sensitization” and “excitotoxicity.” In these cases, jouissance can have a destructive effect on the body and can affect, among others organs, the brain—a process the author has previously described heuristically as the “psychosomatic diseases of the brain.” This would be a special mechanism of automatism that would be triggered under the specific conditions of the fragility of the signifying chain (foreclosure of the Name-of-the-Father or solidification of the signifying chain in combination with biological factors, including genetic factors. In this process, signifiers are reduced to signals, which in turn may be reduced to stimuli, with a tendency toward self-perpetuation, while affects are reduced to emotions and moods. Thus, conditioning and kindling-sensitization could also

Biological Art of Producing Useful Chemicals

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 21; Issue 3. Metabolic Engineering: Biological Art of Producing Useful Chemicals. Ram Kulkarni. General Article Volume 21 Issue 3 March 2016 pp 233-237. Fulltext. Click here to view fulltext PDF. Permanent link:

Assessing health-related quality of life in adolescents: some psychometric properties of the first Norwegian version of KINDL.

Science.gov (United States)

Helseth, Sølvi; Lund, Thorleif

2005-06-01

The study presented in this paper is part of a larger Norwegian investigation among adolescents, where the overall aim is to develop methods to promote their quality of life (QoL), to discover risk factors or threats to adolescents' well-being, and finally to prevent the negative effects of such factors. An adequate generic health-related quality of life (HR-QoL) measure is therefore needed. However, only a limited number of well validated instruments that measure HR-QoL in adolescents exist, and to date only a few has been translated into Norwegian. The purpose of this study was therefore to examine some psychometric properties of the first Norwegian version of a simple, generic, German HR-QoL questionnaire for adolescents, KINDL. The instrument consists of 24-items, distributed in six subscales, which correspond to six domains of adolescents' HR-QoL. Based on a sample of 239 healthy adolescents, the internal consistency reliability is satisfactory for both the total scale and the subscales of 'Self-esteem and Family', fairly good for the 'Emotional' subscale, but lower for the subscales 'Physical', 'Friends' and 'School'. Factor analyses, which concerns construct validity, yielded interpretable solutions. The factor solutions at item level were interpreted to be in line with the original subscales, while factor analysis at subscale level indicated that a common QoL core is involved. To conclude, the Norwegian version of KINDL appears, in general, to be a psychometrically acceptable method of measuring HR-QoL in healthy adolescents. However, the alpha-values of some of the subscales are not optimal, and these scales should be used with caution in research and profession. Still KINDL-N is considered suitable for screening purposes in the public health area and especially within school-health care.

Dutch chemical producers pledge emissions cuts

International Nuclear Information System (INIS)

Chynoweth, E.; Schoenmakers, J.

1993-01-01

Dutch chemical producers have negotiated a long-term agreement with government ministries to reduce emissions of a wide range of chemicals. Industry association Vereniging van de Nederlandse Chemische Industrie (VNCI; Leidschendam) says implementing the commitment will cost companies Dfl 10 billion ($5.4 billion) between 1993 and 2000. VNCI technical director Wim Quik welcomes the accord, which he describes as a management contract, saying, Rather than have legislation, there is a certain adjustment available. Peter Santen, managing director of midsized chemicals player Cindu Chemicals (Uithoorn, the Netherlands) voices some concern about the details of the accord, but adds, we are flexible in trying to agree with the contents of the covenant [it] is better than having new rules from law. The Dutch government, traditionally eager for consensus, has struck a number of such deals with Dutch industries - including packaging, metal, and tire - to reduce emissions and set up environmental management programs. The effort is based on the government's National Environmental Policy Plans - NMP and NMP Plus. Targets for emissions reduction by the chemical industry were provided by a government-funded environmental research institute

A sub-threshold dose of pilocarpine increases glutamine synthetase in reactive astrocytes and enhances the progression of amygdaloid-kindling epilepsy in rats.

Science.gov (United States)

Sun, Hong-Liu; Deng, Da-Ping; Pan, Xiao-Hong; Wang, Chao-Yun; Zhang, Xiu-Li; Chen, Xiang-Ming; Wang, Chun-Hua; Liu, Yu-Xia; Li, Shu-Cui; Bai, Xian-Yong; Zhu, Wei

2016-03-02

The prognosis of patients exposed to a sub-threshold dose of a proconvulsant is difficult to establish. In this study, we investigated the effect of a single sub-threshold dose of the proconvulsant pilocarpine (PILO) on the progression of seizures that were subsequently induced by daily electrical stimulation (kindling) of the amygdaloid formation. Male Sprague–Dawley rats were each implanted with an electrode in the right basolateral amygdala and an indwelling cannula in the right ventricle. The animals were randomized into groups and were administered one of the following treatments: saline, PILO, saline+L-α-aminoadipic acid (L-AAA; one dosage tested), PILO+L-AAA, or PILO+L-methionine sulfoximine (three dosages tested). Amygdaloid stimulation and electroencephalography were performed once daily. We performed immunohistochemistry and western blot for glial fibrillary acidic protein and glutamine synthetase (GS). We also assayed the enzymic activity of GS in discrete brain regions. An intraperitoneal injection of a sub-threshold PILO dose enhanced the progression of amygdaloid-kindling seizures and was accompanied by an increase in reactive-astrocyte and GS (content and activity) in the hippocampus and piriform cortex. L-AAA and L-methionine sulfoximine, inhibitors of astrocytic and GS function, respectively, abolished the effect of PILO on amygdaloid-kindling seizures. We conclude that one sub-threshold dose of a proconvulsant may enhance the progression of subsequent epilepsy and astrocytic GS may play a role in this phenomenon. Thus, a future therapy for epilepsy could be inhibition of astrocytes and/or GS.

Anti-kindling induced by two-stage coordinated reset stimulation with weak onset intensity

Directory of Open Access Journals (Sweden)

Magteld eZeitler

2016-05-01

Full Text Available Abnormal neuronal synchrony plays an important role in a number of brain diseases. To specifically counteract abnormal neuronal synchrony by desynchronization, Coordinated Reset (CR stimulation, a spatiotemporally patterned stimulation technique, was designed with computational means. In neuronal networks with spike timing–dependent plasticity CR stimulation causes a decrease of synaptic weights and finally anti-kindling, i.e. unlearning of abnormally strong synaptic connectivity and abnormal neuronal synchrony. Long-lasting desynchronizing aftereffects of CR stimulation have been verified in pre-clinical and clinical proof of concept studies. In general, for different neuromodulation approaches, both invasive and non-invasive, it is desirable to enable effective stimulation at reduced stimulation intensities, thereby avoiding side effects. For the first time, we here present a two-stage CR stimulation protocol, where two qualitatively different types of CR stimulation are delivered one after another, and the first stage comes at a particularly weak stimulation intensity. Numerical simulations show that a two-stage CR stimulation can induce the same degree of anti-kindling as a single-stage CR stimulation with intermediate stimulation intensity. This stimulation approach might be clinically beneficial in patients suffering from brain diseases characterized by abnormal neuronal synchrony where a first treatment stage should be performed at particularly weak stimulation intensities in order to avoid side effects. This might, e.g., be relevant in the context of acoustic CR stimulation in tinnitus patients with hyperacusis or in the case of electrical deep brain CR stimulation with sub-optimally positioned leads or side effects caused by stimulation of the target itself. We discuss how to apply our method in first in man and proof of concept studies.

Investigation of the potential influence of production treatment chemicals on produced water toxicity

International Nuclear Information System (INIS)

Stine, E.R.; Gala, W.R.; Henry, L.R.

1993-01-01

Production treatment chemicals represent a diverse collection of chemical classes, added at various points from the wellhead to the final flotation cell, to prevent operational upsets and enhance the separation of oil from water. Information in the literature indicates that while many treatment chemicals are thought to partition into oil and not into the produced water, there are cases where a sufficiently water soluble treatment chemical is added at high enough concentrations to suggest that the treatment chemical may add to the aquatic toxicity of the produced water. A study was conducted to evaluate the potential effect of production treatment chemicals on the toxicity of produced waters using the US EPA Seven-day Mysidopsis bahia Survival, Growth and Fecundity Test. Samples of produced water were collected and tested for toxicity from three platforms under normal operating conditions, followed by repeated sampling and testing after a 72-hour period in which treatment chemical usage was discontinued, to the degree possible. Significant reductions in produced water toxicity were observed for two of the three platforms tested following either cessation of treatment chemical usage, or by comparing the toxicity of samples collected upstream and downstream of the point of treatment chemical addition

iPhone, Android, or Kindle: The Emma S. Clark Memorial Library Has an App for That and So Can You

Science.gov (United States)

Johnson, Bob; Gutmann, Ted

2013-01-01

If you are like the millions of people buying the latest smartphone, iPhone 5, or Samsung Galaxy S III, your local library should have something to offer you. The Emma S. Clark Memorial Library, for one, has an app for that! Dubbed "Emma Mobile," the library's application works with iOS (Apple), Android (Google), and Amazon Kindle Fire…

Biotechnology for producing fuels and chemicals from biomass. Volume II. Fermentation chemicals from biomass

Energy Technology Data Exchange (ETDEWEB)

Villet, R. (ed.)

1981-02-01

The technological and economic feasibility of producing some selected chemicals by fermentation is discussed: acetone, butanol, acetic acid, citric acid, 2,3-butanediol, and propionic acid. The demand for acetone and butanol has grown considerably. They have not been produced fermentatively for three decades, but instead by the oxo and aldol processes. Improved cost of fermentative production will hinge on improving yields and using cellulosic feedstocks. The market for acetic acid is likely to grow 5% to 7%/yr. A potential process for production is the fermentation of hydrolyzed cellulosic material to ethanol followed by chemical conversion to acetic acid. For about 50 years fermentation has been the chief process for citric acid production. The feedstock cost is 15% to 20% of the overall cost of production. The anticipated 5%/yr growth in demand for citric acid could be enhanced by using it to displace phosphates in detergent manufacture. A number of useful chemicals can be derived from 2,3-butanediol, which has not been produced commercially on a large scale. R and D are needed to establish a viable commercial process. The commercial fermentative production of propionic acid has not yet been developed. Recovery and purification of the product require considerable improvement. Other chemicals such as lactic acid, isopropanol, maleic anhydride, fumarate, and glycerol merit evaluation for commercial fermentative production in the near future.

Does brain slices from pentylenetetrazole-kindled mice provide a more predictive screening model for antiepileptic drugs?

DEFF Research Database (Denmark)

Hansen, Suzanne L.; Sterjev, Zoran; Werngreen, Marie

2012-01-01

The cortical wedge is a commonly applied model for in vitro screening of new antiepileptic drugs (AEDs) and has been extensively used in characterization of well-known AEDs. However, the predictive validity of this model as a screening model has been questioned as, e.g., carbamazepine has been...... screening model for AEDs. To this end, we compared the in vitro and in vivo pharmacological profile of several selected AEDs (phenobarbital, phenytoin, tiagabine, fosphenytoin, valproate, and carbamazepine) along with citalopram using the PTZ-kindled model and brain slices from naïve, saline...

Ketogenic diet is antiepileptogenic in pentylenetetrazole kindled mice and decrease levels of N-acylethanolamines in hippocampus

DEFF Research Database (Denmark)

Hansen, Suzanne L; Nielsen, Ane H; Knudsen, Katrine E

2009-01-01

The ketogenic diet (KD) is used for the treatment of refractory epilepsy in children, however, the mechanism(s) remains largely unknown. Also, the antiepileptogenic potential in animal models of epilepsy has been poorly addressed. Activation of cannabinoid type-1 receptor (CB(1)-R) upon seizure...... activity or type of diet. The level of oleoylethanolamide as well as the sum of N-acylethanolamines were significantly decreased by the KD, but were unaffected by seizure activity. The study shows that the KD had clear antiepileptogenic properties in the pentylenetetrazole kindling model and does...

A Case Study of Mobile Technology-enabled English Language Learning: the Amazon Kindle e-Reader Initiative in Palestine

Directory of Open Access Journals (Sweden)

Khitam Yousuf Shraim

2014-06-01

Full Text Available The proliferation of increasingly interactive e-reader devices such as the Amazon Kindle represents an opportunity to explore their evolving pedagogical value. This study aims to investigate how use of the Kindle can enhance individuals’ English language learning—more specifically their attitudes, reading comprehension, vocabulary development and pronunciation performance—in the context of informal and lifelong learning in Palestine, and to explore the further potential of scaling up the use of e-readers at a national level. At the piloting stage of this initiative, the study operated at two levels (micro and meso of the M3 evaluation framework. Mixed methods were used: qualitative data were obtained through a case study of the practices and perceptions of two teachers in two classrooms in the Qalqilia center and quantitative data were collected through a survey of 114 learners. The study shows that the Kindle’s technological affordances are effective in creating a flexible, authentic and interactive environment for English language learning, provided that teachers change their teaching methods to take full advantage of the features of mobile technologies to create innovative learning approaches aligned with the needs of the e-generation. It was also found that despite some concerns with the usability issue, attitudes towards learning English changed positively and learners’ vocabulary and pronunciation improved.

Engineering cell factories for producing building block chemicals for bio-polymer synthesis.

Science.gov (United States)

Tsuge, Yota; Kawaguchi, Hideo; Sasaki, Kengo; Kondo, Akihiko

2016-01-21

Synthetic polymers are widely used in daily life. Due to increasing environmental concerns related to global warming and the depletion of oil reserves, the development of microbial-based fermentation processes for the production of polymer building block chemicals from renewable resources is desirable to replace current petroleum-based methods. To this end, strains that efficiently produce the target chemicals at high yields and productivity are needed. Recent advances in metabolic engineering have enabled the biosynthesis of polymer compounds at high yield and productivities by governing the carbon flux towards the target chemicals. Using these methods, microbial strains have been engineered to produce monomer chemicals for replacing traditional petroleum-derived aliphatic polymers. These developments also raise the possibility of microbial production of aromatic chemicals for synthesizing high-performance polymers with desirable properties, such as ultraviolet absorbance, high thermal resistance, and mechanical strength. In the present review, we summarize recent progress in metabolic engineering approaches to optimize microbial strains for producing building blocks to synthesize aliphatic and high-performance aromatic polymers.

Chemical milling solution produces smooth surface finish on aluminum

Science.gov (United States)

Lorenzen, H. C.

1966-01-01

Elementary sulfur mixed into a solution of caustic soda and salts produces an etchant which will chemically mill end-grain surfaces on aluminum plate. This composition results in the least amount of thickness variation and pitting.

Chemical composition and microbial load of cheese produced using ...

African Journals Online (AJOL)

Aframomum sceptrum) on the chemical composition and microbial load of cheese was evaluated in a Completely Randomized Design. Cheese produced with 1% bear berry (Aframomum sceptrum) had the highest (P < 0.05) crude protein content ...

Measuring adolescents' HRQoL via self reports and parent proxy reports: an evaluation of the psychometric properties of both versions of the KINDL-R instrument.

Science.gov (United States)

Erhart, Michael; Ellert, Ute; Kurth, Bärbel-Maria; Ravens-Sieberer, Ulrike

2009-08-26

Several instruments are available to assess children's health-related quality of life (HRQoL) based on self reports as well as proxy reports from parents. Previous studies have found only low-to-moderate agreement between self and proxy reports, but few studies have explicitly compared the psychometric qualities of both. This study compares the reliability, factorial validity and convergent and known group validity of the self-report and parent-report versions of the HRQoL KINDL-R questionnaire for children and adolescents. Within the nationally representative cross-sectional German Health Interview and Examination Survey for Children and Adolescents (KiGGS), 6,813 children and adolescents aged 11 to 17 years completed the KINDL-R generic HRQoL instrument while their parents answered the KINDL proxy version (both in paper-and-pencil versions). Cronbach's alpha and confirmatory factor-analysis models (linear structural equation model) were obtained. Convergent and discriminant validity were assessed by calculating the Pearson's correlation coefficient for the Strengths and Difficulties Questionnaire. Known-groups differences were examined (ANOVA) for obese children and children with a lower familial socio-economic status. The parent reports achieved slightly higher Cronbach's alpha values for the total score (0.86 vs. 0.83) and most sub-scores. Confirmatory factor analysis revealed an acceptable fit of the six-dimensional measurement model of the KINDL for the parent (RMSEA=0.07) and child reports (RMSEA=0.06). Factorial invariance across the two versions did not hold with regards to the pattern of loadings, the item errors and the covariation between latent concepts. However the magnitude of the differences was rather small. The parent report version achieved slightly higher convergent validity (r=0.44-0.63 vs. r=0.33-0.59) in the Strengths and Difficulties Questionnaire. No clear differences were observed for known-groups validity. Our study showed that parent

Measuring adolescents' HRQoL via self reports and parent proxy reports: an evaluation of the psychometric properties of both versions of the KINDL-R instrument

Directory of Open Access Journals (Sweden)

Ravens-Sieberer Ulrike

2009-08-01

Full Text Available Abstract Background Several instruments are available to assess children's health-related quality of life (HRQoL based on self reports as well as proxy reports from parents. Previous studies have found only low-to-moderate agreement between self and proxy reports, but few studies have explicitly compared the psychometric qualities of both. This study compares the reliability, factorial validity and convergent and known group validity of the self-report and parent-report versions of the HRQoL KINDL-R questionnaire for children and adolescents. Methods Within the nationally representative cross-sectional German Health Interview and Examination Survey for Children and Adolescents (KiGGS, 6,813 children and adolescents aged 11 to 17 years completed the KINDL-R generic HRQoL instrument while their parents answered the KINDL proxy version (both in paper-and-pencil versions. Cronbach's alpha and confirmatory factor-analysis models (linear structural equation model were obtained. Convergent and discriminant validity were assessed by calculating the Pearson's correlation coefficient for the Strengths and Difficulties Questionnaire. Known-groups differences were examined (ANOVA for obese children and children with a lower familial socio-economic status. Results The parent reports achieved slightly higher Cronbach's alpha values for the total score (0.86 vs. 0.83 and most sub-scores. Confirmatory factor analysis revealed an acceptable fit of the six-dimensional measurement model of the KINDL for the parent (RMSEA = 0.07 and child reports (RMSEA = 0.06. Factorial invariance across the two versions did not hold with regards to the pattern of loadings, the item errors and the covariation between latent concepts. However the magnitude of the differences was rather small. The parent report version achieved slightly higher convergent validity (r = 0.44 – 0.63 vs. r = 0.33 – 0.59 in the Strengths and Difficulties Questionnaire. No clear differences were

Occurrence and exposure to polycyclic aromatic hydrocarbons in kindling-free-charcoal grilled meat products in Taiwan.

Science.gov (United States)

Kao, Tsai Hua; Chen, Shaun; Huang, Chun Wei; Chen, Chia Ju; Chen, Bing Huei

2014-09-01

This study aimed to determine the contents of 16 PAHs in kindling-free-charcoal grilled meat and seafood products by GC-MS coupled with a QuEChERS method, and estimate the potential risk associated with consumption of those products in Taiwan. Results showed that the total PAHs contents ranged from 6.3±0.9 to 238.8±8.3 ng/g in poultry meat, 0.1±0.0-547.5±12.2 ng/g in red meat, and 6.6±1.4-249.7±6.4 ng/g in seafood products. Among various PAHs, the highly carcinogenic benzo[a]pyrene was detected in chicken breast grilled at 84°C (30 min), chicken heart at 100°C (26 min), chicken drumstick at 74°C (20 min), duck drumstick at 85°C (40 min), and lamb steak at 88°C (12 min), with its level amounting to 1.3±0.0, 2.4±0.1, 4.0±1.3, 3.1±0.0, and 5.8±0.5 ng/g, respectively. The generation of PAHs was associated with grilling time, temperature and fat content. Risk assessment of dietary exposure to PAHs revealed toxicity equivalent to range from ND - 6.174±0.505 μg/g and margin of exposure was >10,000, which agreed with the EFSA's definition of low public health concern. The lifelong average daily PAHs intake was higher for adults than for elderly people in Taiwan, however, consumption of kindling-free-charcoal grilled meat should not be a public health concern based on cancer risk potency. Copyright © 2014 Elsevier Ltd. All rights reserved.

Modificação do metodo "kindling" para obtenção de status epilepticus experimental em ratos

Directory of Open Access Journals (Sweden)

Carlos J. Reis de Campos

1980-03-01

Full Text Available Foi utilizada em nova espécie animal (ratos, uma modificação do método "kindling", introduzida por Taber e col. (1977 para obtenção de status epilepticus experimental. Para isso foram implantados mediante cirurgia estereotáxica, eletrodos duplos, torcidos no hipocampo dorsal de 12 ratos machos albinos. Esses animais foram submetidos, após uma semana de pós-operatório, a 1 segundo de estimulação elétrica de baixa intensidade em forma intermitente, um estímulo por minuto durante 2 horas, desenvolvendo-se em prazo de 30 minutos um estado de epilepsia eletrográfica e comportamental duradoura. Vários padrões de descargas epilépticas eletrográficas foram observados bem como manifestações convulsivas tônico-clônicas. Os animais que foram submetidos a novas sessões de estimulação após 7 e 14 dias mostraram aumento de atividade epiléptica demonstrando uma modificação plástica do hipocampo do rato submetido a estimulação elétrica a qual perdura no tempo. O método permite a obtenção de "kindling" em tempo bem mais curto (horas, comparativamente às técnicas anteriormente descritas (dias, tornando-se um promissor modelo de epilepsia para testes de drogas anticonvulsivantes e para o estudo dos mecanismos fisiopatológicos e bioquímicos envolvidos na descarga epiléptica.

Superconducting lead particles produced by chemical techniques

Science.gov (United States)

Fariss, T. L.; Nixon, W. E.; Bucelot, T. J.; Deaver, B. S., Jr.; Mitchell, J. W.

1982-09-01

The superconductivity of extremely small lead particles has been studied as a function of size, surface condition, and connectivity using chemical techniques to produce particles of well-controlled size and shape suspended in insulating media. Approximately monodisperse suspensions of equiaxed, rod, and lath-shaped particles of lead halides and other lead compounds suspended in gelatin, polyacrylamide, polyvinylpyrrolidone, polyvinyl alcohol, methyl cellulose, and hydroxyethyl cellulose have been produced. These particles have been reduced to pseudomorphs of lead in the liquid phase or the suspensions have been coated on substrates and dried before reduction. Reducing solutions containing aminoiminomethanesulfinic acid are effective with particles of lead halides, lead phosphate, lead sulfate, and lead tartrate. Suspensions of smaller discrete lead particles have also been produced by direct reduction of solutions of soluble lead salts containing suitable polymers, chelating, and stabilizing agents. Dispersions with mean particle dimensions between 3 nm and 5 μm, and a narrow size-frequency distribution, have been produced. The superconductivity of the particles has been characterized by measurements of the magnetization as a function of temperature and magnetic field. The larger particles have a transition temperature of 7.2 K, the same as bulk lead; however, for particles of characteristic dimensions less than 20 nm, the transition temperature is lower by ˜0.1 K.

Superconducting lead particles produced by chemical techniques

International Nuclear Information System (INIS)

Fariss, T.L.; Nixon, W.E.; Bucelot, T.J.; Deaver, B.S. Jr.; Mitchell, J.W.

1982-01-01

The superconductivity of extremely small lead particles has been studied as a function of size, surface condition, and connectivity using chemical techniques to produce particles of well-controlled size and shape suspended in insulating media. Approximately monodisperse suspensions of equiaxed, rod, and lath-shaped particles of lead halides and other lead compounds suspended in gelatin, polyacrylamide, polyvinylpyrrolidone, polyvinyl alcohol, methyl cellulose, and hydroxyethyl cellulose have been produced. These particles have been reduced to pseudomorphs of lead in the liquid phase or the suspensions have been coated on substrates and dried before reduction. Reducing solutions containing aminoiminomethanesulfinic acid are effective with particles of lead halides, lead phosphate, lead sulfate, and lead tartrate. Suspensions of smaller discrete lead particles have also been produced by direct reduction of solutions of soluble lead salts containing suitable polymers, chelating, and stabilizing agents. Dispersions with mean particle dimensions between 3 nm and 5 μm, and a narrow size-frequency distribution, have been produced. The superconductivity of the particles has been characterized by measurements of the magnetization as a function of temperature and magnetic field. The larger particles have a transition temperature of 7.2 K, the same as bulk lead; however, for particles of characteristic dimensions less than 20 nm, the transition temperature is lower by approx.0.1 K

Modification of kindled amygdaloid seizures by opiate agonists and antagonists.

Science.gov (United States)

Albertson, T E; Joy, R M; Stark, L G

1984-03-01

The effects of 19 opiate agonists and antagonists on kindled amygdaloid seizures in the rat were studied. The mu agonists tended to reduce the length of elicited afterdischarges and behavioral ranks, while markedly increasing postictal electroencephalogram spikes and behavioral arrest time. These effects were reversed by naloxone. The kappa agonists reduced behavioral rank and variably reduced afterdischarge length with a concomitant lengthening of postictal behavioral arrest time and number of electroencephalogram spikes. The putative sigma agonist, SKF 10,047, reduced afterdischarge durations only at the higher doses tested. The decreases found after the sigma agonists in postictal electroencephalogram spiking and time of behavioral arrest were not reversed by naloxone. Only the lower doses of normeperidine were found to decrease seizure thresholds. The mixed agonist/antagonists (MAA) cyclazocine and cyclorphan markedly increased seizure threshold and reduced afterdischarge duration and behavioral rank. Only the MAA pentazocine tended to increase threshold but not suprathreshold afterdischarge durations. The order of ability to modify the ictal events was MAA (selected) greater than kappa agonists greater than mu agonists greater than sigma agonists. The increase in postictal events (behavior arrest and spikes) was caused most effectively by pretreatment with mu agonist greater than kappa agonist greater than selected MAA greater than sigma agonists.(ABSTRACT TRUNCATED AT 250 WORDS)

Low-frequency stimulation of the external globus palladium produces anti-epileptogenic and anti-ictogenic actions in rats.

Science.gov (United States)

Cheng, Hui; Kuang, Yi-fang; Liu, Yang; Wang, Yi; Xu, Zheng-hao; Gao, Feng; Zhang, Shi-hong; Ding, Mei-ping; Chen, Zhong

2015-08-01

To investigate the anti-epileptic effects of deep brain stimulation targeting the external globus palladium (GPe) in rats. For inducing amygdala kindling and deep brain stimulation, bipolar stainless-steel electrodes were implanted in SD rats into right basolateral amygdala and right GPe, respectively. The effects of deep brain stimulation were evaluated in the amygdala kindling model, maximal electroshock model (MES) and pentylenetetrazole (PTZ) model. Moreover, the background EEGs in the amygdala and GPe were recorded. Low-frequency stimulation (0.1 ms, 1 Hz, 15 min) at the GPe slowed the progression of seizure stages and shortened the after-discharge duration (ADD) during kindling acquisition. Furthermore, low-frequency stimulation significantly decreased the incidence of generalized seizures, suppressed the average stage, and shortened the cumulative ADD and generalized seizure duration in fully kindled rats. In addition, low-frequency stimulation significantly suppressed the average stage of MES-induced seizures and increased the latency to generalized seizures in the PTZ model. High-frequency stimulation (0.1 ms, 130 Hz, 5 min) at the GPe had no anti-epileptic effect and even aggravated epileptogenesis induced by amygdala kindling. EEG analysis showed that low-frequency stimulation at the GPe reversed the increase in delta power, whereas high-frequency stimulation at the GPe had no such effect. Low-frequency stimulation, but not high-frequency stimulation, at the GPe exerts therapeutic effect on temporal lobe epilepsy and tonic-colonic generalized seizures, which may be due to interference with delta rhythms. The results suggest that modulation of GPe activity using low-frequency stimulation or drugs may be a promising epilepsy treatment.

Curcumin-loaded chitosan-alginate-STPP nanoparticles ameliorate memory deficits and reduce glial activation in pentylenetetrazol-induced kindling model of epilepsy.

Science.gov (United States)

Hashemian, Mona; Anissian, Diana; Ghasemi-Kasman, Maryam; Akbari, Atefeh; Khalili-Fomeshi, Mohsen; Ghasemi, Shahram; Ahmadi, Fatemeh; Moghadamnia, Ali Akbar; Ebrahimpour, Anahita

2017-10-03

Despite several beneficial effects of curcumin, its medical application has been hampered due to low water solubility. To improve the aqueous solubility of curcumin, it has been loaded on chitosan (CS)-alginate (ALG) - sodium tripolyphosphate (STPP) nanoparticles (NPs). Then, the effect of curcumin NPs on memory improvement and glial activation was investigated in pentylenetetrazol (PTZ)-induced kindling model. Male NMRI mice have received the daily injection of curcumin NPs at dose of 12.5 or 25mg/kg. All interventions were injected intraperitoneally (i.p), 10days before PTZ administration and the injections were continued until 1h before each PTZ injection. Spatial learning and memory was evaluated using Morris water maze test after the 7th PTZ injection. Animals have received 10 injections of PTZ and then, brain tissues were removed for histological evaluation. Nissl staining was used to determine the level of cell death in hippocampus and immunostaining method was performed against NeuN and GFAP/Iba1 for assessment of neuronal density and glial activation respectively. Behavioral results showed that curcumin NPs exhibit anticonvulsant activity and prevent cognitive impairment in fully kindled animals. The level of cell death and glial activation reduced in animals which have received curcumin NPs compared to those received free curcumin. To conclude, these findings suggest that curcumin NPs effectively ameliorate memory impairment and attenuate the level of activated glial cells in a mice model of chronic epilepsy. Copyright © 2017. Published by Elsevier Inc.

Survey of renewable chemicals produced from lignocellulosic biomass during ionic liquid pretreatment

Directory of Open Access Journals (Sweden)

Varanasi Patanjali

2013-01-01

Full Text Available Abstract Background Lignin is often overlooked in the valorization of lignocellulosic biomass, but lignin-based materials and chemicals represent potential value-added products for biorefineries that could significantly improve the economics of a biorefinery. Fluctuating crude oil prices and changing fuel specifications are some of the driving factors to develop new technologies that could be used to convert polymeric lignin into low molecular weight lignin and or monomeric aromatic feedstocks to assist in the displacement of the current products associated with the conversion of a whole barrel of oil. We present an approach to produce these chemicals based on the selective breakdown of lignin during ionic liquid pretreatment. Results The lignin breakdown products generated are found to be dependent on the starting biomass, and significant levels were generated on dissolution at 160°C for 6 hrs. Guaiacol was produced on dissolution of biomass and technical lignins. Vanillin was produced on dissolution of kraft lignin and eucalytpus. Syringol and allyl guaiacol were the major products observed on dissolution of switchgrass and pine, respectively, whereas syringol and allyl syringol were obtained by dissolution of eucalyptus. Furthermore, it was observed that different lignin-derived products could be generated by tuning the process conditions. Conclusions We have developed an ionic liquid based process that depolymerizes lignin and converts the low molecular weight lignin fractions into a variety of renewable chemicals from biomass. The generated chemicals (phenols, guaiacols, syringols, eugenol, catechols, their oxidized products (vanillin, vanillic acid, syringaldehyde and their easily derivatized hydrocarbons (benzene, toluene, xylene, styrene, biphenyls and cyclohexane already have relatively high market value as commodity and specialty chemicals, green building materials, nylons, and resins.

Variability of chemical analysis of reinforcing bar produced in Saudi Arabia

Science.gov (United States)

Salman, A.; Djavanroodi, F.

2018-04-01

In view of the importance and demanding roles of steel rebar’s in the reinforced concrete structures, accurate information on the properties of the steels is important at the design stage. In the steelmaking process, production variations in chemical composition are unavoidable. The aim of this work is to study the variability of the chemical composition of reinforcing steel produced throughout the Saudi Arabia and asses the quality of steel rebar’s acoording to ASTM A615. 68 samples of ASTM A615 Grade 60 from different manufacturers were collected and tested using the Spectrometer test to obtain Chemical Compositions. EasyFit (5.6) software is utilized to conducted statistical analysis. Chemical compositions distributions and, control charts are generated for the compositions. Results showed that some compositions are above the upper line of the control chart. Finally, the analyses show that less than 3% of the steel failed to meet minimum ASTM standards for chemical composition.

Engineering cell factories for producing building block chemicals for bio-polymer synthesis

OpenAIRE

Tsuge, Yota; Kawaguchi, Hideo; Sasaki, Kengo; Kondo, Akihiko

2016-01-01

Synthetic polymers are widely used in daily life. Due to increasing environmental concerns related to global warming and the depletion of oil reserves, the development of microbial-based fermentation processes for the production of polymer building block chemicals from renewable resources is desirable to replace current petroleum-based methods. To this end, strains that efficiently produce the target chemicals at high yields and productivity are needed. Recent advances in metabolic engineerin...

15 CFR 714.1 - Annual declaration requirements for plant sites that produce a Schedule 3 chemical in excess of...

Science.gov (United States)

2010-01-01

... plant sites that produce a Schedule 3 chemical in excess of 30 metric tons. 714.1 Section 714.1 Commerce... SCHEDULE 3 CHEMICALS § 714.1 Annual declaration requirements for plant sites that produce a Schedule 3... in the production of a chemical in any units within the same plant through chemical reaction...

Comparison of Moringa Oleifera seeds oil characterization produced chemically and mechanically

Science.gov (United States)

Eman, N. A.; Muhamad, K. N. S.

2016-06-01

It is established that virtually every part of the Moringa oleifera tree (leaves, stem, bark, root, flowers, seeds, and seeds oil) are beneficial in some way with great benefits to human being. The tree is rich in proteins, vitamins, minerals. All Moringa oleifera food products have a very high nutritional value. They are eaten directly as food, as supplements, and as seasonings as well as fodder for animals. The purpose of this research is to investigate the effect of seeds particle size on oil extraction using chemical method (solvent extraction). Also, to compare Moringa oleifera seeds oil properties which are produced chemically (solvent extraction) and mechanically (mechanical press). The Moringa oleifera seeds were grinded, sieved, and the oil was extracted using soxhlet extraction technique with n-Hexane using three different size of sample (2mm, 1mm, and 500μm). The average oil yield was 36.1%, 40.80%, and 41.5% for 2mm, 1mm, and 500μm particle size, respectively. The properties of Moringa oleifera seeds oil were: density of 873 kg/m3, and 880 kg/m3, kinematic viscosity of 42.2mm2/s and 9.12mm2/s for the mechanical and chemical method, respectively. pH, cloud point and pour point were same for oil produced with both methods which is 6, 18°C and 12°C, respectively. For the fatty acids, the oleic acid is present with high percentage of 75.39%, and 73.60% from chemical and mechanical method, respectively. Other fatty acids are present as well in both samples which are (Gadoleic acid, Behenic acid, Palmitic acid) which are with lower percentage of 2.54%, 5.83%, and 5.73%, respectively in chemical method oil, while they present as 2.40%, 6.73%, and 6.04%, respectively in mechanical method oil. In conclusion, the results showed that both methods can produce oil with high quality. Moringa oleifera seeds oil appear to be an acceptable good source for oil rich in oleic acid which is equal to olive oil quality, that can be consumed in Malaysia where the olive oil

Engineering microbial chemical factories to produce renewable "biomonomers".

Science.gov (United States)

Adkins, Jake; Pugh, Shawn; McKenna, Rebekah; Nielsen, David R

2012-01-01

By applying metabolic engineering tools and strategies to engineer synthetic enzyme pathways, the number and diversity of commodity and specialty chemicals that can be derived directly from renewable feedstocks is rapidly and continually expanding. This of course includes a number of monomer building-block chemicals that can be used to produce replacements to many conventional plastic materials. This review aims to highlight numerous recent and important advancements in the microbial production of these so-called "biomonomers." Relative to naturally-occurring renewable bioplastics, biomonomers offer several important advantages, including improved control over the final polymer structure and purity, the ability to synthesize non-natural copolymers, and allowing products to be excreted from cells which ultimately streamlines downstream recovery and purification. To highlight these features, a handful of biomonomers have been selected as illustrative examples of recent works, including polyamide monomers, styrenic vinyls, hydroxyacids, and diols. Where appropriate, examples of their industrial penetration to date and end-product uses are also highlighted. Novel biomonomers such as these are ultimately paving the way toward new classes of renewable bioplastics that possess a broader diversity of properties than ever before possible.

Characterizing the variability in chemical composition of flowback and produced waters - results from lab and field studies

Science.gov (United States)

Vieth-Hillebrand, Andrea; Wilke, Franziska D. H.; Schmid, Franziska E.; Zhu, Yaling; Lipińska, Olga; Konieczyńska, Monika

2017-04-01

The huge volumes and unknown composition of flowback and produced waters cause major public concerns about the environmental and social compatibility of hydraulic fracturing and the exploitation of gas from unconventional reservoirs. Flowback and produced waters contain not only residues of fracking additives but also chemical species that are dissolved from the target shales themselves. Shales are a heterogeneous mixture of minerals, organic matter, and formation water and little is actually understood about the fluid-rock interactions occurring during hydraulic fracturing of the shales and their effects on the chemical composition of flowback and produced water. To overcome this knowledge gap, interactions of different shales with different artificial stimulation fluids were studied in lab experiments under ambient and elevated temperature and pressure conditions. These lab experiments showed clearly that fluid-rock interactions change the chemical composition of the initial stimulation fluid and that geochemistry of the fractured shale is relevant for understanding flowback water composition. In addition, flowback water samples were taken after hydraulic fracturing of one horizontal well in Pomeranian region, Poland and investigated for their chemical composition. With this presentation, results from lab and field studies will be presented and compared to decipher possible controls on chemical compositions of flowback and produced water.

Chemical Resistance of Ornamental Compound Stone Produced with Marble Waste and Unsaturated Polyester

Science.gov (United States)

Ribeiro, Carlos E. Gomes; Rodriguez, Rubén J. Sánchez; Vieira, Carlos M. Fontes

Ornamental compound stone are produced by industry for decades, however, few published studies describe these materials. Brazil has many deposits of stone wastes and a big potential to produce these materials. This work aims to evaluate the chemical resistance of ornamental compound stones produced with marble waste and unsaturated polyester. An adaptation of Annex H of ABNT NBR 13818:97 standard, with reagents commonly used in household products, was used. The results were compared with those obtained for natural stone used in composite production.

Chemical profile of sugarcane spirits produced by double distillation methodologies in rectifying still

Directory of Open Access Journals (Sweden)

André Ricardo Alcarde

2011-06-01

Full Text Available The objective of this study was to determine the chemical profile of sugarcane spirits produced by different double distillation methodologies in rectifying still. Fermented sugarcane juice was distilled in rectifying still according to three double distillation methodologies: the methodology used for cognac production; the methodology used for whisky production; and the 10-80-10 percentage composition methodology, referring to the volumes of head, heart and tail of the distillate fractions from the second distillation. For comparison purposes, a simple distilled spirit was also produced. The distillates were analyzed for concentrations of ethanol, copper, volatile acidity, furfural and hydroxymethylfurfural, aldehydes, esters, methanol and higher alcohols. The spirits were also evaluated on the sensory attributes of aroma, taste and preference. Compared to simple distillation, double distillation improved the chemical quality of the spirits, since it has reduced the concentrations of acids, aldehydes, esters, methanol, higher alcohols and, consequently, their coefficient of congeners. Regardless of the methodology employed, the double distillation improved the sensory quality of the spirits since they obtained higher sensory acceptance in relation to spirits produced by simple distillation. Among double distilled spirits, the one produced according to whisky methodology obtained the best scores from appraisers on the aroma and flavor parameters and it was also the most preferred.

Interaction between Thalamus and Hippocampus in Termination of Amygdala-Kindled Seizures in Mice

Directory of Open Access Journals (Sweden)

Zhen Zhang

2016-01-01

Full Text Available The thalamus and hippocampus have been found both involved in the initiation, propagation, and termination of temporal lobe epilepsy. However, the interaction of these regions during seizures is not clear. The present study is to explore whether some regular patterns exist in their interaction during the termination of seizures. Multichannel in vivo recording techniques were used to record the neural activities from the cornu ammonis 1 (CA1 of hippocampus and mediodorsal thalamus (MDT in mice. The mice were kindled by electrically stimulating basolateral amygdala neurons, and Racine’s rank standard was employed to classify the stage of behavioral responses (stage 1~5. The coupling index and directionality index were used to investigate the synchronization and information flow direction between CA1 and MDT. Two main results were found in this study. (1 High levels of synchronization between the thalamus and hippocampus were observed before the termination of seizures at stage 4~5 but after the termination of seizures at stage 1~2. (2 In the end of seizures at stage 4~5, the information tended to flow from MDT to CA1. Those results indicate that the synchronization and information flow direction between the thalamus and the hippocampus may participate in the termination of seizures.

Effects of the benzodiazepine antagonists RO 15-1788, CGS-8216 and PK-11195 on amygdaloid kindled seizures and the anticonvulsant efficacy of diazepam.

Science.gov (United States)

Albertson, T E; Walby, W F

1986-11-01

The anticonvulsant effectiveness of the benzodiazepine antagonists RO 15-1788, CGS-8216 and PK-11195 were evaluated against threshold and suprathreshold (400 microA) stimulation in fully amygdaloid-kindled rats. Pretreatment with either RO 15-1788 (3, 10 and 30 mg/kg), CGS-8216 (3, 10 and 30 mg/kg) or PK-11195 (10 and 60 mg/kg) failed in this study to modify consistently either the afterdischarge thresholds or elicited suprathreshold seizures or duration of afterdischarge. Using a double injection paradigm, the effectiveness of these three benzodiazepine antagonists to reverse the anti-convulsant and behavioral effects of diazepam were studied. When diazepam (3 mg/kg) was injected 15 min before or after a second injection of the vehicle control DMSO (0.25 ml/kg), a significant reduction in the duration of afterdischarge and seizure rank, elicited by a suprathreshold stimulation in amygdaloid-kindled rats, occurred. When either CGS 8216 (10 mg/kg) or RO 15-1788 (10 mg/kg) were given 15 min before diazepam (3 mg/kg) prior to stimulation, the anticonvulsant properties of diazepam were blocked. When RO 15-1788 (10 mg/kg) was given 15 min after diazepam, antagonism of the anticonvulsant effects on diazepam was shown. However, when either CGS-8216 (10 mg/kg) or PK-11195 (10 and 60 mg/kg) were given 15 min after diazepam (3 mg/kg), the anticonvulsant properties of diazepam were not blocked. The anticonvulsant effects of diazepam were reversed when CGS-8216 (10 mg/kg) was given 5 min after diazepam (3 mg/kg) or when a larger dose (30 mg/kg) was given at the same 15 min interval.(ABSTRACT TRUNCATED AT 250 WORDS)

Evaluating the Role of Drone-Produced Chemical Signals in Mediating Social Interactions in Honey Bees (Apis mellifera).

Science.gov (United States)

Villar, Gabriel; Wolfson, Megan D; Hefetz, Abraham; Grozinger, Christina M

2018-01-01

Pheromones play a critical role in shaping societies of social insects, including honey bees, Apis mellifera. While diverse functions have been ascribed to queen- and worker-produced compounds, few studies have explored the identity and function of male-produced (drone) compounds. However, several lines of evidence suggest that drones engage in a variety of social interactions inside and outside of the colony. Here we elucidate the chemical composition of extracts of the drone mandibular gland, and test the hypothesis that compounds produced in these glands, or a synthetic blend consisting of the six main compounds, mediate drone social interactions in and out of the colony. Drone mandibular glands primarily produce a blend of saturated, unsaturated and methyl branched fatty acids ranging in chain length from nonanoic to docosanoic acids, and both gland extracts and synthetic blends of these chemicals serve to attract drones outside of the hive, but do not attract workers inside the hive. These studies shed light on the role drones and drone-produced chemicals have on mediating social interactions with other drones and highlight their potential importance in communicating with other castes.

Chemical elements dynamic in the fermentation process of ethanol producing

International Nuclear Information System (INIS)

Nepomuceno, N.; Nadai Fernandes, E.A. de; Bacchi, M.A.

1994-01-01

This paper provides useful information about the dynamics of chemical elements analysed by instrumental neutron activation analysis (INAA) and, found in the various segments of the fermentation process of producing ethanol from sugar cane. For this, a mass balance of Ce, Co, Cs, Eu, Fe, Hf, La, Sc, Sm, and Th, terrigenous elements, as well as Br, K, Rb, and Zn, sugar cane plant elements, has been demonstrated for the fermentation vats in industrial conditions of ethanol production. (author). 10 refs, 4 figs, 1 tab

Method for producing chemical energy

Science.gov (United States)

Jorgensen, Betty S.; Danen, Wayne C.

2004-09-21

Fluoroalkylsilane-coated metal particles having a central metal core, a buffer layer surrounding the core, and a fluoroalkylsilane layer attached to the buffer layer are prepared by combining a chemically reactive fluoroalkylsilane compound with an oxide coated metal particle having a hydroxylated surface. The resulting fluoroalkylsilane layer that coats the particles provides them with excellent resistance to aging. The particles can be blended with oxidant particles to form energetic powder that releases chemical energy when the buffer layer is physically disrupted so that the reductant metal core can react with the oxidant.

Engineering Microbial Chemical Factories to Produce Renewable ‘Biomonomers’

Directory of Open Access Journals (Sweden)

Jake eAdkins

2012-08-01

Full Text Available By applying metabolic engineering tools and strategies to engineer synthetic enzyme pathways, the number and diversity of commodity and specialty chemicals that can be derived directly from renewable feedstocks is rapidly and continually expanding. This of course includes a number of monomer building-block chemicals that can be used to produce replacements to many conventional plastic materials. This review aims to highlight numerous recent and important advancements in the microbial production of these so-called ‘biomonomers’. Relative to naturally-occurring renewable bioplastics, biomonomers offer several important advantages, including improved control over the final polymer structure and purity, the ability to synthesize non-natural copolymers, and allowing products to be excreted from cells which ultimately streamlines downstream recovery and purification. To highlight these features, a handful of biomonomers have been selected as illustrative examples of recent works, including polyamide monomers, styrenic vinyls, hydroxyacids, and diols. Where appropriate, examples of their industrial penetration to date and end-product uses are also highlighted. Novel biomonomers such as these are ultimately paving the way towards new classes of renewable bioplastics that possess a broader diversity of properties than ever before possible.

Engineering microbial chemical factories to produce renewable “biomonomers”

Science.gov (United States)

Adkins, Jake; Pugh, Shawn; McKenna, Rebekah; Nielsen, David R.

2012-01-01

By applying metabolic engineering tools and strategies to engineer synthetic enzyme pathways, the number and diversity of commodity and specialty chemicals that can be derived directly from renewable feedstocks is rapidly and continually expanding. This of course includes a number of monomer building-block chemicals that can be used to produce replacements to many conventional plastic materials. This review aims to highlight numerous recent and important advancements in the microbial production of these so-called “biomonomers.” Relative to naturally-occurring renewable bioplastics, biomonomers offer several important advantages, including improved control over the final polymer structure and purity, the ability to synthesize non-natural copolymers, and allowing products to be excreted from cells which ultimately streamlines downstream recovery and purification. To highlight these features, a handful of biomonomers have been selected as illustrative examples of recent works, including polyamide monomers, styrenic vinyls, hydroxyacids, and diols. Where appropriate, examples of their industrial penetration to date and end-product uses are also highlighted. Novel biomonomers such as these are ultimately paving the way toward new classes of renewable bioplastics that possess a broader diversity of properties than ever before possible. PMID:22969753

Brain redox imaging in the pentylenetetrazole (PTZ)-induced kindling model of epilepsy by using in vivo electron paramagnetic resonance and a nitroxide imaging probe.

Science.gov (United States)

Emoto, Miho C; Yamato, Mayumi; Sato-Akaba, Hideo; Yamada, Ken-ichi; Fujii, Hirotada G

2015-11-03

Much evidence supports the idea that oxidative stress is involved in the pathogenesis of epilepsy, and therapeutic interventions with antioxidants are expected as adjunct antiepileptic therapy. The aims of this study were to non-invasively obtain spatially resolved redox data from control and pentylenetetrazole (PTZ)-induced kindled mouse brains by electron paramagnetic resonance (EPR) imaging and to visualize the brain regions that are sensitive to oxidative damage. After infusion of the redox-sensitive imaging probe 3-methoxycarbonyl-2,2,5,5-tetramethyl-piperidine-1-oxyl (MCP), a series of EPR images of PTZ-induced mouse heads were measured. Based on the pharmacokinetics of the reduction reaction of MCP in the mouse heads, the pixel-based rate constant of its reduction reaction was calculated as an index of redox status in vivo and mapped as a redox map. The obtained redox map showed heterogeneity in the redox status in PTZ-induced mouse brains compared with control. The co-registered image of the redox map and magnetic resonance imaging (MRI) for both control and PTZ-induced mice showed a clear change in the redox status around the hippocampus after PTZ. To examine the role of antioxidants on the brain redox status, the levels of antioxidants were measured in brain tissues of control and PTZ-induced mice. Significantly lower concentrations of glutathione in the hippocampus of PTZ-kindled mice were detected compared with control. From the results of both EPR imaging and the biochemical assay, the hippocampus was found to be susceptible to oxidative damage in the PTZ-induced animal model of epilepsy. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Storage stability of margarines produced from enzymatically interesterified fats compared to those prepared by conventional methods - Chemical properties

DEFF Research Database (Denmark)

Zhang, Hong; Jacobsen, Charlotte; Pedersen, Lars Saaby

2006-01-01

margarines in a pilot plant. Storage stability studies were carried out at storage temperatures of 5 and 25øC for 12wk. Margarines from the enzymatically interesterified fats were compared to the margarines produced by the conventional methods (chemical interesterification and physical blending......In this study, four margarine hardstocks were produced, two from enzymatically interesterified fats at 80 and 100% conversion, one from chemically randomized fat and one from physically mixed fat. These four hardstocks, blended with 50% sunflower oil, were mainly used for the production of table...... interesterified fat had higher PV in weeks4, 8 and10 than the margarines produced from the enzymatically interesterified fats and the physically blended fat. These differences were not caused by different contents of tocopherols in the hardstocks. The differences between the processes for chemical and enzymatic...

Attracting predators without falling prey: chemical camouflage protects honeydew-producing treehoppers from ant predation.

Science.gov (United States)

Silveira, Henrique C P; Oliveira, Paulo S; Trigo, José R

2010-02-01

Predaceous ants are dominant organisms on foliage and represent a constant threat to herbivorous insects. The honeydew of sap-feeding hemipterans has been suggested to appease aggressive ants, which then begin tending activities. Here, we manipulated the cuticular chemical profiles of freeze-dried insect prey to show that chemical background matching with the host plant protects Guayaquila xiphias treehoppers against predaceous Camponotus crassus ants, regardless of honeydew supply. Ant predation is increased when treehoppers are transferred to a nonhost plant with which they have low chemical similarity. Palatable moth larvae manipulated to match the chemical background of Guayaquila's host plant attracted lower numbers of predatory ants than unchanged controls. Although aggressive tending ants can protect honeydew-producing hemipterans from natural enemies, they may prey on the trophobionts under shortage of alternative food resources. Thus chemical camouflage in G. xiphias allows the trophobiont to attract predaceous bodyguards at reduced risk of falling prey itself.

Chemical Composition and Pharmacological Effects of Geopropolis Produced by Melipona quadrifasciata anthidioides

OpenAIRE

dos Santos, Cintia Miranda; Campos, Jaqueline Ferreira; dos Santos, Helder Freitas; Balestieri, José Benedito Perrella; Silva, Denise Brentan; de Picoli Souza, Kely; Carollo, Carlos Alexandre; Estevinho, Leticia M.; dos Santos, Edson Lucas

2017-01-01

Stingless bees produce geopropolis, which is popularly described for its medicinal properties, but for which few scientific studies have demonstrated pharmacological effects. The objective of this study was to investigate the chemical composition of the geopropolis of Melipona quadrifasciata anthidioides and to evaluate its antioxidant, antimutagenic, anti-inflammatory, and antimicrobial activities. The composition of the hydroethanolic extract of geopropolis (HEG) included di- and trigalloyl...

The Synthesis of Silver Nanoparticles Produced by Chemical Reduction of Silver Salt Solution

International Nuclear Information System (INIS)

Sri Budi Harmani; Dewi Sondari; Agus Haryono

2008-01-01

Described in this research are the synthesis of silver nanoparticle produced by chemical reduction of silver salt (silver nitrate AgNO 3 ) solution. As a reducer, sodium citrate (C 6 H 5 O 7 Na 3 ) was used. Preparation of silver colloid is done by using chemical reduction method. In typical experiment 150 ml of 1.10 -3 M AgNO 3 solution was heated with temperature variation such as 90, 100, 110 degree of Celsius. To this solution 15 ml of 1 % trisodium citrate was added into solution drop by drop during heating. During the process, solution was mixed vigorously. Solution was heated until colour's change is evident (pale yellow solution is formed). Then it was removed from the heating element and stirred until cooled to room temperature. Experimental result showed that diameter of silver nanoparticles in colloid solution is about 28.3 nm (Ag colloid, 90 o C); 19.9 nm (Ag colloid, 100 o C)and 26.4 nm (Ag colloid, 110 o C). Characterization of the silver nanoparticle colloid conducted by using UV-Vis Spectroscopy, Particles Size Analyzer (PSA) and Scanning Electron Microscope (SEM) indicate the produced structures of silver nanoparticles. (author)

Chemical allergens stimulate human epidermal keratinocytes to produce lymphangiogenic vascular endothelial growth factor

Energy Technology Data Exchange (ETDEWEB)

Bae, Ok-Nam [College of Pharmacy, Institute of Pharmaceutical Science and Technology, Hanyang University, Ansan 426-791 (Korea, Republic of); Ahn, Seyeon; Jin, Sun Hee; Hong, Soo Hyun; Lee, Jinyoung [College of Pharmacy, Natural Products Research Institute, Seoul National University, Seoul 151-742 (Korea, Republic of); Kim, Eun-Sun [College of Pharmacy, Institute of Pharmaceutical Science and Technology, Hanyang University, Ansan 426-791 (Korea, Republic of); Jeong, Tae Cheon [College of Pharmacy, Yeungnam University, Gyeongsan 712-749 (Korea, Republic of); Chun, Young-Jin [College of Pharmacy, Chung-Ang University, Seoul 156-756 (Korea, Republic of); Lee, Ai-Young, E-mail: leeay@duih.org [Department of Dermatology, Dongguk University Ilsan Hospital, Goyang 410-773 (Korea, Republic of); Noh, Minsoo, E-mail: minsoo@alum.mit.edu [College of Pharmacy, Natural Products Research Institute, Seoul National University, Seoul 151-742 (Korea, Republic of)

2015-03-01

Allergic contact dermatitis (ACD) is a cell-mediated immune response that involves skin sensitization in response to contact with various allergens. Angiogenesis and lymphangiogenesis both play roles in the allergic sensitization process. Epidermal keratinocytes can produce vascular endothelial growth factor (VEGF) in response to UV irradiation and during wound healing. However, the effect of haptenic chemical allergens on the VEGF production of human keratinocytes, which is the primary contact site of toxic allergens, has not been thoroughly researched. We systematically investigated whether immune-regulatory cytokines and chemical allergens would lead to the production of VEGF in normal human keratinocytes (NHKs) in culture. VEGF production significantly increased when NHKs were treated with IFNγ, IL-1α, IL-4, IL-6, IL-17A, IL-22 or TNFα. Among the human sensitizers listed in the OECD Test Guideline (TG) 429, we found that CMI/MI, DNCB, 4-phenylenediamine, cobalt chloride, 2-mercaptobenzothiazole, citral, HCA, cinnamic alcohol, imidazolidinyl urea and nickel chloride all significantly upregulated VEGF production in NHKs. In addition, common human haptenic allergens such as avobenzone, formaldehyde and urushiol, also induced the keratinocyte-derived VEGF production. VEGF upregulation by pro-inflammatory stimuli, IFNγ, DNCB or formaldehyde is preceded by the production of IL-8, an acute inflammatory phase cytokine. Lymphangiogenic VEGF-C gene transcription was significantly increased when NHKs were treated with formaldehyde, DNCB or urushiol, while transcription of VEGF-A and VEGF-B did not change. Therefore, the chemical allergen-induced VEGF upregulation is mainly due to the increase in lymphangiogenic VEGF-C transcription in NHKs. These results suggest that keratinocyte-derived VEGF may regulate the lymphangiogenic process during the skin sensitization process of ACD. - Highlights: • Pro-inflammatory cytokines induced VEGF production in normal human

Chemical allergens stimulate human epidermal keratinocytes to produce lymphangiogenic vascular endothelial growth factor

International Nuclear Information System (INIS)

Bae, Ok-Nam; Ahn, Seyeon; Jin, Sun Hee; Hong, Soo Hyun; Lee, Jinyoung; Kim, Eun-Sun; Jeong, Tae Cheon; Chun, Young-Jin; Lee, Ai-Young; Noh, Minsoo

2015-01-01

Allergic contact dermatitis (ACD) is a cell-mediated immune response that involves skin sensitization in response to contact with various allergens. Angiogenesis and lymphangiogenesis both play roles in the allergic sensitization process. Epidermal keratinocytes can produce vascular endothelial growth factor (VEGF) in response to UV irradiation and during wound healing. However, the effect of haptenic chemical allergens on the VEGF production of human keratinocytes, which is the primary contact site of toxic allergens, has not been thoroughly researched. We systematically investigated whether immune-regulatory cytokines and chemical allergens would lead to the production of VEGF in normal human keratinocytes (NHKs) in culture. VEGF production significantly increased when NHKs were treated with IFNγ, IL-1α, IL-4, IL-6, IL-17A, IL-22 or TNFα. Among the human sensitizers listed in the OECD Test Guideline (TG) 429, we found that CMI/MI, DNCB, 4-phenylenediamine, cobalt chloride, 2-mercaptobenzothiazole, citral, HCA, cinnamic alcohol, imidazolidinyl urea and nickel chloride all significantly upregulated VEGF production in NHKs. In addition, common human haptenic allergens such as avobenzone, formaldehyde and urushiol, also induced the keratinocyte-derived VEGF production. VEGF upregulation by pro-inflammatory stimuli, IFNγ, DNCB or formaldehyde is preceded by the production of IL-8, an acute inflammatory phase cytokine. Lymphangiogenic VEGF-C gene transcription was significantly increased when NHKs were treated with formaldehyde, DNCB or urushiol, while transcription of VEGF-A and VEGF-B did not change. Therefore, the chemical allergen-induced VEGF upregulation is mainly due to the increase in lymphangiogenic VEGF-C transcription in NHKs. These results suggest that keratinocyte-derived VEGF may regulate the lymphangiogenic process during the skin sensitization process of ACD. - Highlights: • Pro-inflammatory cytokines induced VEGF production in normal human

Extraction Tools for Identification of Chemical Contaminants in Estuarine and Coastal Waters to Determine Toxic Pressure on Primary Producers

NARCIS (Netherlands)

Booij, P; Sjollema, S.B.; Leonards, P.E.G.; de Voogt, P.; Stroomberg, G.J.; Vethaak, A.D.; Lamoree, M.H.

2013-01-01

The extent to which chemical stressors affect primary producers in estuarine and coastal waters is largely unknown. However, given the large number of legacy pollutants and chemicals of emerging concern present in the environment, this is an important and relevant issue that requires further study.

Chemical composition of overland flow produced on soils covered with vegetative ash

Directory of Open Access Journals (Sweden)

M.B. Bodí

2013-05-01

Full Text Available The objective of this study was to ascertain the differences between the soluble elements of ash obtained under laboratory conditions and the dissolved in overland flow from soils covered with a layer of ash. The overland flow was obtained during series of rainfall simulations over soils covered with two different types of ash. This study indicates that the soluble elements released from ash can modify water quality increasing its pH, electrical conductivity and especially cation content. The nutrients solubilised are not necessarily the same as the elemental composition of ash itself. Runoff composition depends on the volume of water produced, on the solubility of the ash components and on the chemical interactions with water from rainfall and soil. After the first intense rain event, most of the elements are solubilised and lixiviated or washed out, however, some of them may increase in the runoff or soil water some weeks later due to chemical interactions with water from rainfall and soil nutrients.

Engineering and Evolution of Saccharomyces cerevisiae to Produce Biofuels and Chemicals.

Science.gov (United States)

Turner, Timothy L; Kim, Heejin; Kong, In Iok; Liu, Jing-Jing; Zhang, Guo-Chang; Jin, Yong-Su

To mitigate global climate change caused partly by the use of fossil fuels, the production of fuels and chemicals from renewable biomass has been attempted. The conversion of various sugars from renewable biomass into biofuels by engineered baker's yeast (Saccharomyces cerevisiae) is one major direction which has grown dramatically in recent years. As well as shifting away from fossil fuels, the production of commodity chemicals by engineered S. cerevisiae has also increased significantly. The traditional approaches of biochemical and metabolic engineering to develop economic bioconversion processes in laboratory and industrial settings have been accelerated by rapid advancements in the areas of yeast genomics, synthetic biology, and systems biology. Together, these innovations have resulted in rapid and efficient manipulation of S. cerevisiae to expand fermentable substrates and diversify value-added products. Here, we discuss recent and major advances in rational (relying on prior experimentally-derived knowledge) and combinatorial (relying on high-throughput screening and genomics) approaches to engineer S. cerevisiae for producing ethanol, butanol, 2,3-butanediol, fatty acid ethyl esters, isoprenoids, organic acids, rare sugars, antioxidants, and sugar alcohols from glucose, xylose, cellobiose, galactose, acetate, alginate, mannitol, arabinose, and lactose.

Chemical Composition of Different Botanical Origin Honeys Produced by Sicilian Black Honeybees (Apis mellifera ssp. sicula).

Science.gov (United States)

Mannina, Luisa; Sobolev, Anatoly P; Di Lorenzo, Arianna; Vista, Silvia; Tenore, Gian Carlo; Daglia, Maria

2015-07-01

In 2008 a Slow Food Presidium was launched in Sicily (Italy) for an early warning of the risk of extinction of the Sicilian native breed of black honeybee (Apis mellifera L. ssp sicula). Today, the honey produced by these honeybees is the only Sicilian honey produced entirely by the black honeybees. In view of few available data regarding the chemical composition of A. mellifera ssp. sicula honeys, in the present investigation the chemical compositions of sulla honey (Hedysarum coronarium L.) and dill honey (Anethum graveolens L.) were studied with a multimethodological approach, which consists of HPLC-PDA-ESI-MSn and NMR spectroscopy. Moreover, three unifloral honeys (lemon honey (obtained from Citrus limon (L.) Osbeck), orange honey (Citrus arantium L.), and medlar honey (Eriobotrya japonica (Thunb.) Lindl)), with known phenol and polyphenol compositions, were studied with NMR spectroscopy to deepen the knowledge about sugar and amino acid compositions.

Chemical composition and fermentative parameters of heart of palm waste produced from Alexander Palm ensiled with chemical additives

Directory of Open Access Journals (Sweden)

Geraldo Fábio Viana Bayão

Full Text Available ABSTRACT The objective of this study was to evaluate the chemical composition and the fermentative parameters of heart of palm waste produced from Alexander Palm, ensiled with chemical additives. Treatments consisted of silage of the sheath with or without calcium oxide. In the silage without calcium oxide, we evaluated the control silage (without additive and the silage enriched with 5.0 g kg−1 urea (urea. In the silage with calcium oxide, we evaluated the silage enriched with 5.0 g kg−1 calcium oxide (control and the silage enriched with 5.0 g kg−1 urea and 5.0 g kg−1 calcium oxide (urea. Experimental silos were distributed in a completely randomized design in a 2 × 2 factorial arrangement (inclusion or lack of lime × inclusion or lack of urea, with four replicates. Crude protein concentration was greater in the silages that received urea, whereas in the case of neutral detergent fiber and acid detergent fiber, the lowest levels were found in the control silage. Control silage had the lowest pH (3.75 and the silages that received lime displayed the lowest lactic acid content. Effluent losses were greater in the control silage and in the silage with lime (56.1 kg t−1 and 58.4 kg t−1, respectively. Silages prepared with waste from heart of palm production and enriched only with urea showed a better chemical composition and improved fermentation parameter estimates. We recommend the use of this waste only with additives that can improve the chemical characteristics of the forage. Without additives, unwanted fermentation processes may occur and compromise the quality of the silage.

Seizures induced by carbachol, morphine, and leucine-enkephalin: a comparison.

Science.gov (United States)

Snead, O C

1983-04-01

The electrical, behavioral, and pharmacological properties of seizures induced by morphine, leucine-enkephalin, and the muscarinic cholinergic agonist carbachol were examined and compared. Low-dose carbachol given intracerebroventricularly (ICV) produced seizures similar electrically to those produced by ICV morphine and leucine-enkephalin, although there was some difference in site of subcortical origin of onset. Carbachol and morphine were similar in that they had the same anticonvulsant profile, produced similar behavioral changes, caused generalized absence seizures in low doses and generalized convulsive seizures in high doses, and were capable of chemical kindling. However, opiate-induced seizures were not overcome by cholinergic antagonists, nor were carbachol seizures blocked by opiate antagonists. These data suggest that there may be a common noncholinergic, nonopiatergic system involved in mediating carbachol- and morphine-induced seizures but not enkephalin seizures.

Overview of Chronic Oral Toxicity Values for Chemicals Present in Hydraulic Fracturing Fluids, Flowback and Produced Waters

Science.gov (United States)

as part of EPA's Hydraulic Fracturing Drinking Water Assessment, EPA is summarizing existing toxicity data for chemicals reported to be used in hydraulic fracturing fluids and/or found in flowback or produced waters from hydraulically fractured wells

Chemically produced nanostructured ODS-lanthanum oxide-tungsten composites sintered by spark plasma

International Nuclear Information System (INIS)

Yar, Mazher Ahmed; Wahlberg, Sverker; Bergqvist, Hans; Salem, Hanadi G.; Johnsson, Mats; Muhammed, Mamoun

2011-01-01

High purity W and W-0.9La 2 O 3 (wt.%) nanopowders were produced by a wet chemical route. The precursor was prepared by the reaction of ammonium paratungstate (APT) with lanthanum salt in aqueous solutions. High resolution electron microscopy investigations revealed that the tungstate particles were coated with oxide precipitates. The precursor powder was reduced to tungsten metal with dispersed lanthanum oxide. Powders were consolidated by spark plasma sintering (SPS) at 1300 and 1400 o C to suppress grain growth during sintering. The final grain size relates to the SPS conditions, i.e. temperature and heating rate, regardless of the starting powder particle size. Scanning electron microscopy revealed that oxide phases were mainly accumulated at grain boundaries while the tungsten matrix constituted of nanosized sub-grains. The transmission electron microscopy revealed that the tungsten grains consist of micron-scale grains and finer sub-grains. EDX analysis confirmed the presence of W in dispersed oxide phases with varying chemical composition, which evidenced the presence of complex oxide phases (W-O-La) in the sintered metals.

Study of the chemical species of fluorine 18 produced by neutron irradiation of lithium aluminate

International Nuclear Information System (INIS)

Jimenez-Becerril, J.

1990-01-01

In the present work, the chemical form of fluorine-18 obtained by means of the neutron irradiated lithium aluminate was studied, in order to know its chemical behavior and to observe if it volatilizes and adheres to the walls of a tritium distillation system; for this matter paper chromatography and high voltage electrophoresis techniques were used. Lithium aluminate was synthetized, being characterized as LiAlO 2 which was irradiated with neutrons in order to produce fluorine-18. Lithium aluminate is a non-soluble solid, therefore fluorine produced may not be extracted, unless it is dissolved or extracted through the solid. So as not affect in a drastic way the chemical form, it was submitted to extraction processes, agitating the irradiated samples with different acids and basic solutions in order to analyze fluorine-18. The best extraction agent was found to be HCl, where two forms of fluorine-18 were found, one at the point of application, probably as a complex hexafluoride-aluminate and the other as a characteristic Rf of the fluorine ion. In the tritium distillation with helium as a carrier of a sample irradiated and heated up to 220-250 o C, no volatile types of fluorine-18 were found, thus it can be considered that in commercial production of tritium by means of neutron irradiation of lithium aluminate, fluorine-18 is not a damaging pollutant of the equipment pipe system. (Author)

Chemical/structural characterization of carbon nanoparticles produced by laser pyrolysis and used for nanotube growth

International Nuclear Information System (INIS)

Orlanducci, S.; Valentini, F.; Piccirillo, S.; Terranova, M.L.; Botti, S.; Ciardi, R.; Rossi, M.; Palleschi, G.

2004-01-01

Carbon nanoparticles produced by CO 2 laser pyrolysis have been investigated using morphological and structural probes such as high-resolution scanning electron microscopy, transmission electron microscopy, Raman spectroscopy and electron diffraction, as well as chemical probes, such as gas chromatography-mass spectrometry and fast atom bombardment-mass spectrometry. The produced particles resulted to have a spherical shape and a diameter of about 50 nm with graphitic domains of the order of 80 A. They contain appreciable fractions of polycyclic aromatic hydrocarbons, which can be extracted with toluene, as well as fullerene units. The implications of these results for the use of carbon nanopowders in the carbon nanotube synthesis are also discussed

Evaluation of Cannabidiol in Animal Seizure Models by the Epilepsy Therapy Screening Program (ETSP).

Science.gov (United States)

Klein, Brian D; Jacobson, Catherine A; Metcalf, Cameron S; Smith, Misty D; Wilcox, Karen S; Hampson, Aidan J; Kehne, John H

2017-07-01

Cannabidiol (CBD) is a cannabinoid component of marijuana that has no significant activity at cannabinoid receptors or psychoactive effects. There is considerable interest in CBD as a therapy for epilepsy. Almost a third of epilepsy patients are not adequately controlled by clinically available anti-seizure drugs (ASDs). Initial studies appear to demonstrate that CBD preparations may be a useful treatment for pharmacoresistant epilepsy. The National Institute of Neurological Disorders and Stroke (NINDS) funded Epilepsy Therapy Screening Program (ETSP) investigated CBD in a battery of seizure models using a refocused screening protocol aimed at identifying pharmacotherapies to address the unmet need in pharmacoresistant epilepsy. Applying this new screening workflow, CBD was investigated in mouse 6 Hz 44 mA, maximal electroshock (MES), corneal kindling models and rat MES and lamotrigine-resistant amygdala kindling models. Following intraperitoneal (i.p.) pretreatment, CBD produced dose-dependent protection in the acute seizure models; mouse 6 Hz 44 mA (ED 50 164 mg/kg), mouse MES (ED 50 83.5 mg/kg) and rat MES (ED 50 88.9 mg/kg). In chronic models, CBD produced dose-dependent protection in the corneal kindled mouse (ED 50 119 mg/kg) but CBD (up to 300 mg/kg) was not protective in the lamotrigine-resistant amygdala kindled rat. Motor impairment assessed in conjunction with the acute seizure models showed that CBD exerted seizure protection at non-impairing doses. The ETSP investigation demonstrates that CBD exhibits anti-seizure properties in acute seizure models and the corneal kindled mouse. However, further preclinical and clinical studies are needed to determine the potential for CBD to address the unmet needs in pharmacoresistant epilepsy.

Optimization of physico-chemical and nutritional parameters for a novel pullulan-producing fungus, Eurotium chevalieri.

Science.gov (United States)

Gaur, R; Singh, R; Tiwari, S; Yadav, S K; Daramwal, N S

2010-09-01

To isolate the novel nonmelanin pullulan-producing fungi from soil and to optimize the physico-chemical and nutritional parameters for pullulan production. A selective enrichment method was followed for the isolation, along with development of a suitable medium for pullulan production, using shake flask experiments. Pullulan content was confirmed using pure pullulan and pullulanase hydrolysate. Eurotium chevalieri was able to produce maximum pullulan (38 ± 1·0 g l(-1) ) at 35°C, pH 5·5, 2·5% sucrose, 0·3% ammonium sulfate and 0·2% yeast extract in a shake flash culture medium with an agitation rate of 30 rev min(-1) for 65 h. The novel pullulan-producing fungus was identified as E. chevalieri (MTCC no. 9614), which was able to produce nonmelanin pullulan at from poorer carbon and nitrogen sources than Aureobasidium pullulans and may therefore be useful for the commercial production of pullulan. Eurotium chevalieri could produce pullulan in similar amounts to A. pullulans. Therefore, in future, this fungus could also be used for commercial pullulan production, because it is neither polymorphic nor melanin producing, hence its handling during pullulan fermentation will be easier and more economical. © 2010 The Authors. Journal compilation © 2010 The Society for Applied Microbiology.

Caloric restriction protects against electrical kindling of the amygdala by inhibiting the mTOR signaling pathway

Directory of Open Access Journals (Sweden)

Bryan Victor Phillips-Farfan

2015-03-01

Full Text Available Caloric restriction (CR has been shown to possess antiepileptic properties; however its mechanism of action is poorly understood. CR might inhibit the activity of the mammalian or mechanistic target of rapamycin (mTOR signaling cascade, which seems to participate crucially in the generation of epilepsy. Thus, we investigated the effect of CR on the mTOR pathway and whether CR modified epilepsy generation due to electrical amygdala kindling. The former was studied by analyzing the phosphorylation of adenosine monophosphate-activated protein kinase, protein kinase B and the ribosomal protein S6. The mTOR cascade is regulated by energy and by insulin levels, both of which may be changed by CR; thus we investigated if CR altered the levels of energy substrates in the blood or the level of insulin in plasma. Finally, we studied if CR modified the expression of genes that encode proteins participating in the mTOR pathway. CR increased the after-discharge threshold and tended to reduce the after-discharge duration, indicating an anti-convulsive action. CR diminished the phosphorylation of protein kinase B and ribosomal protein S6, suggesting an inhibition of the mTOR cascade. However, CR did not change glucose, β-hydroxybutyrate or insulin levels; thus the effects of CR were independent from them. Interestingly, CR also did not modify the expression of any investigated gene. The results suggest that the anti-epileptic effect of CR may be partly due to inhibition of the mTOR pathway.

Chemical and biological studies on sweet biscuits produced from irradiated phaseolus beans flour

International Nuclear Information System (INIS)

Nassef, A.E.

2005-01-01

This study was carried out to evaluate the chemical composition of beans such as minerals, amino acids, total carbohydrates and fiber to produce high quality sweet biscuits for treating some special diseases. In this study, the Phaseolus beans flour was used as a new source of very important composition. Beans flour was irradiated at two doses (0.5 and 1.0 KGy) for preservation. Sweet biscuits were made with supplementation of 5, 10, 15% beans flour. All samples of sweet biscuits were examined for chemical composition and organoleptic characteristics. Biological assay was carried out in rats maintained on 15% either irradiated or non-irradiated beans flour sweet biscuits through determining the weight gain, serum cholesterol and triglycerides and investigating the internal organs. The results obtained showed that sweet biscuits containing 15% Phaseolus beans flour had highest content of protein, minerals and fiber and scored a good grade. Weight gain, cholesterol and triglycerides levels were reduced comparable to control and there was no effect of irradiated beans flour on the internal organs

Bridging the Gap between Chemical Flooding and Independent Oil Producers

Energy Technology Data Exchange (ETDEWEB)

Stan McCool; Tony Walton; Paul Whillhite; Mark Ballard; Miguel Rondon; Kaixu Song; Zhijun Liu; Shahab Ahmed; Peter Senior

2012-03-31

Ten Kanas oil reservoirs/leases were studied through geological and engineering analysis to assess the potential performance of chemical flooding to recover oil. Reservoirs/leases that have been efficiently waterflooded have the highest performance potential for chemical flooding. Laboratory work to identify efficient chemical systems and to test the oil recovery performance of the systems was the major effort of the project. Efficient chemical systems were identified for crude oils from nine of the reservoirs/leases. Oil recovery performance of the identified chemical systems in Berea sandstone rocks showed 90+ % recoveries of waterflood residual oil for seven crude oils. Oil recoveries increased with the amount of chemical injected. Recoveries were less in Indiana limestone cores. One formulation recovered 80% of the tertiary oil in the limestone rock. Geological studies for nine of the oil reservoirs are presented. Pleasant Prairie, Trembley, Vinland and Stewart Oilfields in Kansas were the most favorable of the studied reservoirs for a pilot chemical flood from geological considerations. Computer simulations of the performance of a laboratory coreflood were used to predict a field application of chemical flooding for the Trembley Oilfield. Estimates of field applications indicated chemical flooding is an economically viable technology for oil recovery.

In-situ chemical reduction produced graphene paper for flexible supercapacitors with impressive capacitive performance

Science.gov (United States)

Ye, Xingke; Zhu, Yucan; Tang, Zhonghua; Wan, Zhongquan; Jia, Chunyang

2017-08-01

For practical applications of graphene-based materials in flexible supercapacitors, a technological breakthrough is currently required to fabricate high-performance graphene paper by a facile method. Herein, highly conductive (∼6900 S m-1) graphene paper with loose multilayered structure is produced by a high-efficiency in-situ chemical reduction process, which assembles graphite oxide suspensions into film and simultaneously conducts chemical reduction. Graphene papers with different parameters (including different types and doses of reductants, different thicknesses and areas of films) are successfully fabricated through this in-situ chemical reduction method. Meanwhile, the influences of the graphene papers with different parameters upon the supercapacitor performance are systematically investigated. Flexible supercapacitor based on the graphene paper exhibits high areal capacitance (152.4 mF cm-2 at current density of 2.0 mA cm-2 in aqueous electrolyte), and excellent rate performance (88.7% retention at 8.0 mA cm-2). Furthermore, bracelet-shaped all-solid supercapacitor with fascinating cycling stability (96.6% retention after 10 000 cycles) and electrochemical stability (an almost negligible capacity loss under different bending states and 99.6% retention after 4000 bending cycles) is established by employing the graphene paper electrode material and polymer electrolyte.

Neuro-overprotection? A functional evaluation of clomethiazole-induced neuroprotection following hypoxic-ischemic injury.

Science.gov (United States)

Gilby, K L; Kelly, M E; McIntyre, D C; Robertson, H A

2005-01-01

Hypoxic-ischemic (H-I) injury produces extensive damage to the hippocampus of young rats. We have recently shown that administration of 125 mg kg-1 clomethiazole (CMZ), a GABA(A)-agonist, provides complete histological protection against H-I injury if administered 3 h post-H-I (Brain Res 1035 (2005) 194). However, whether that histological protection translates into lasting functional preservation is unclear. To determine whether hippocampal-based circuits remain functionally intact in CMZ-protected H-I rats, we administered 125 mg kg-1 (high dose [CMZ-HD]) or 65 mg kg-1 (low dose [CMZ-LD]) CMZ, 3 h post-H-I, and examined numerous kindling parameters in the dorsal hippocampus 60 days following H-I. Kindling parameters included afterdischarge (AD) thresholds (ADTs), AD durations and kindling rates. Additional groups assessed included vehicle-injected H-I (VIH), hypoxic, ligated and naive rats. VIH, CMZ-HD, CMZ-LD and hypoxic rats all exhibited significantly faster kindling rates than naive rats. Thus, a previous traumatic event, even hypoxia alone, facilitated subsequent seizure propagation. Still, a significantly slower kindling rate was evident in CMZ-HD rats than in hypoxic, VIH or CMZ-LD rats. Moreover, while longer pre-kindling AD durations were observed in the damaged hippocampus of VIH compared with naive rats, this was not true for either CMZ-treated groups, hypoxic or ligated rats. Collectively, these findings suggest CMZ can suppress the epileptogenic effects of H-I. Surprisingly, however, both groups of CMZ-treated rats exhibited a four to nine times greater ADT than any other group and this effect was most profound in the CMZ-protected hippocampus. Thus, CMZ administration protected local neurons against terminal insult and left network excitability relatively normal with respect to seizure offset mechanisms but also caused profound elevation of local ADTs, which suggests a local hypoexcitability/increased inhibition. Finally, this study demonstrates

The chemical composition and pharmacological activities of geopropolis produced by Melipona fasciculata Smith in northeast Brazil

OpenAIRE

Araújo, Maria José Abigail Mendes [UNESP; Búfalo, Michelle Cristiane [UNESP; Conti, Bruno José [UNESP; Fernandes Jr., Ary [UNESP; Trusheva, Boryana; Bankova, Vassya; Sforcin, José Maurício [UNESP

2015-01-01

Aim: Geopropolis is produced by stingless bees from resinous materials of plants, adding salivary secretions, wax, mud or clay, and has been used in folk medicine for the treatment of respiratory diseases and dermatoses. Therefore, it is important to study its antibacterial, antitumor and immunomodulatory properties are important to confirm the ethnopharmacological applications. This work aimed to evaluate its chemical composition, and its antimicrobial, anti-tumoral and immunomodulatory acti...

Vibrationally Excited Carbon Monoxide Produced via a Chemical Reaction Between Carbon Vapor and Oxygen

Science.gov (United States)

Jans, Elijah R.; Eckert, Zakari; Frederickson, Kraig; Rich, Bill; Adamovich, Igor V.

2017-06-01

Measurements of the vibrational distribution function of carbon monoxide produced via a reaction between carbon vapor and molecular oxygen has shown a total population inversion on vibrational levels 4-7. Carbon vapor, produced using an arc discharge to sublimate graphite, is mixed with an argon oxygen flow. The excited carbon monoxide is vibrationally populated up to level v=14, at low temperatures, T=400-450 K, in a collision-dominated environment, 15-20 Torr, with total population inversions between v=4-7. The average vibrational energy per CO molecule formed by the reaction is 0.6-1.2 eV/molecule, which corresponds to 10-20% of the reaction enthalpy. Kinetic modeling of the flow reactor, including state specific vibrational processes, was performed to infer the vibrational distribution of the products of the reaction. The results show viability of developing of a new chemical CO laser from the reaction of carbon vapor and oxygen.

Sea Cucumber Glycosides: Chemical Structures, Producing Species and Important Biological Properties.

Science.gov (United States)

Mondol, Muhammad Abdul Mojid; Shin, Hee Jae; Rahman, M Aminur; Islam, Mohamad Tofazzal

2017-10-17

Sea cucumbers belonging to echinoderm are traditionally used as tonic food in China and other Asian countries. They produce abundant biologically active triterpene glycosides. More than 300 triterpene glycosides have been isolated and characterized from various species of sea cucumbers, which are classified as holostane and nonholostane depending on the presence or absence of a specific structural unit γ(18,20)-lactone in the aglycone. Triterpene glycosides contain a carbohydrate chain up to six monosaccharide units mainly consisting of d-xylose, 3-O-methy-d-xylose, d-glucose, 3-O-methyl-d-glucose, and d-quinovose. Cytotoxicity is the common biological property of triterpene glycosides isolated from sea cucumbers. Besides cytotoxicity, triterpene glycosides also exhibit antifungal, antiviral and hemolytic activities. This review updates and summarizes our understanding on diverse chemical structures of triterpene glycosides from various species of sea cucumbers and their important biological activities. Mechanisms of action and structural-activity relationships (SARs) of sea cucumber glycosides are also discussed briefly.

Modeling production functions and economic weights in intensive meat production of guinea pigs.

Science.gov (United States)

Pascual, Mariam; Cruz, Danny Julio; Blasco, Agustín

2017-10-01

A profit function for a typical commercial farm of intensive guinea pig production was designed. The simulated farm contained 86 cages with a ratio of 7:1 females/males, with continuous mating. Kits were weaned at 15 days of age and slaughtered for meat production at 90 days of age. The absolute (EW) and relative economic weights of the main traits were calculated. The highest EW were kits produced per kindling (US$25), kits weaned per kindling (US$22), kits born alive per kindling (US$20), and the number of kindlings per female and year (US$12). Profit, returns, and costs per female and year were US$15, 68, and 53, respectively. Returns came from the production of young guinea pigs and discarded reproductive adults for meat production, 90 and 10% of the total returns. The highest costs were feeding and labor, 44 and 23% of the total cost. The EW and profit did not substantially change when simulating variations of ±20% in the prices of kilograms of fattening feed and kilograms of live weight of guinea pig, showing their robustness to future variations in market prices or to variations in prices between countries. The results obtained highlight the importance of the feeding costs in the guinea pig meat production.

A Marine Sulfate-Reducing Bacterium Producing Multiple Antibiotics: Biological and Chemical Investigation

Directory of Open Access Journals (Sweden)

Xiaoliang Wang

2009-07-01

Full Text Available A marine sulfate-reducing bacterium SRB-22 was isolated by means of the agar shake dilution method and identified as Desulfovibrio desulfuricans by morphological, physiological and biochemical characteristics and 16S rDNA analysis. In the bioassay, its extract showed broad-spectrum antimicrobial activity using the paper disc agar diffusion method. This isolate showed a different antimicrobial profile than either ampicillin or nystatin and was found to produce at least eight antimicrobial components by bioautography. Suitable fermentation conditions for production of the active constituents were determined to be 28 day cultivation at 25 °C to 30 °C with a 10% inoculation ratio. Under these conditions, the SRB-22 was fermented, extracted and chemically investigated. So far an antimicrobial compound, mono-n-butyl phthalate, and an inactive compound, thymine, have been isolated and characterized.

The chemical volatiles (semiochemicals) produced by neo tropical stink bugs (Hemiptera: Pentatomidae)

Energy Technology Data Exchange (ETDEWEB)

Moraes, Maria C.B.; Pareja, Martin; Laumann, Raul A.; Borges, Miguel [EMBRAPA Recursos Geneticos e Biotecnologia, Brasilia, DF (Brazil). Nucleo Tematico Controle Biologico

2008-09-15

In recent years the growing concern about environmental changes and how we are using the natural resources have triggered a search for natural products as alternatives to synthetic pesticides. The stink bugs produce a wide variety of chemical compounds (semiochemicals) that show potential to manage these insects. The stink bugs Chinavia impicticornis (Stal), C. ubica (Rolston), Dichelops melacanthus (Dallas), Euschistus heros (F.), Piezodorus guildinii (Westwood), Thyanta perditor (Westwood) and Tibraca limbativentris (Stal) had their blends of defensive compounds evaluated both qualitative and quantitatively. The main compounds identified on the glands of Brazilian stink bugs are: 2-alkenals, mainly the E isomer; saturated aliphatic hydrocarbons; and 4 oxo-(E)-2-alkenals. The first sex attractant determined from a stink bug was obtained from Nezara viridula L., and consists on a mix of two isomers cis - and trans bisabolene-epoxides. Later the soybean stink bug E. heros was also studied and its sex attractant was identified as three esters methyl: 2,6,10-trimethyl decanoate, methyl 2,6,10-trimethyl dodecanoate, and methyl E2, Z4-decadienoate. Recently, three new Brazilian sting bugs were studied and had their sex attractant elucidated. Males of T. perditor produce the ester, methyl 2E, 4Z, 6Z-decatrienoate. Whereas, the stink bug, P. guildinii has as sexual pheromone, the sesquiterpene beta-sesqui phellandrene, and the stink bug T. limbativentris produces as sex attractant the zingiberenol. In this review we discuss the advances obtained on the behaviour and identification of sex and defensive compound of stink bugs from Brazilian crops and the application of this knowledge to manage the stink bugs. (author)

The chemical volatiles (semiochemicals) produced by neo tropical stink bugs (Hemiptera: Pentatomidae)

International Nuclear Information System (INIS)

Moraes, Maria C.B.; Pareja, Martin; Laumann, Raul A.; Borges, Miguel

2008-01-01

In recent years the growing concern about environmental changes and how we are using the natural resources have triggered a search for natural products as alternatives to synthetic pesticides. The stink bugs produce a wide variety of chemical compounds (semiochemicals) that show potential to manage these insects. The stink bugs Chinavia impicticornis (Stal), C. ubica (Rolston), Dichelops melacanthus (Dallas), Euschistus heros (F.), Piezodorus guildinii (Westwood), Thyanta perditor (Westwood) and Tibraca limbativentris (Stal) had their blends of defensive compounds evaluated both qualitative and quantitatively. The main compounds identified on the glands of Brazilian stink bugs are: 2-alkenals, mainly the E isomer; saturated aliphatic hydrocarbons; and 4 oxo-(E)-2-alkenals. The first sex attractant determined from a stink bug was obtained from Nezara viridula L., and consists on a mix of two isomers cis - and trans bisabolene-epoxides. Later the soybean stink bug E. heros was also studied and its sex attractant was identified as three esters methyl: 2,6,10-trimethyl decanoate, methyl 2,6,10-trimethyl dodecanoate, and methyl E2, Z4-decadienoate. Recently, three new Brazilian sting bugs were studied and had their sex attractant elucidated. Males of T. perditor produce the ester, methyl 2E, 4Z, 6Z-decatrienoate. Whereas, the stink bug, P. guildinii has as sexual pheromone, the sesquiterpene beta-sesqui phellandrene, and the stink bug T. limbativentris produces as sex attractant the zingiberenol. In this review we discuss the advances obtained on the behaviour and identification of sex and defensive compound of stink bugs from Brazilian crops and the application of this knowledge to manage the stink bugs. (author)

Chemical Structure, Property and Potential Applications of Biosurfactants Produced by Bacillus subtilis in Petroleum Recovery and Spill Mitigation

Science.gov (United States)

Liu, Jin-Feng; Mbadinga, Serge Maurice; Yang, Shi-Zhong; Gu, Ji-Dong; Mu, Bo-Zhong

2015-01-01

Lipopeptides produced by microorganisms are one of the five major classes of biosurfactants known and they have received much attention from scientific and industrial communities due to their powerful interfacial and biological activities as well as environmentally friendly characteristics. Microbially produced lipopeptides are a series of chemical structural analogues of different families and, among them, 26 families covering about 90 lipopeptide compounds have been reported in the last two decades. This paper reviews the chemical structural characteristics and molecular behaviors of surfactin, one of the representative lipopeptides of the 26 families. In particular, two novel surfactin molecules isolated from cell-free cultures of Bacillus subtilis HSO121 are presented. Surfactins exhibit strong self-assembly ability to form sphere-like micelles and larger aggregates at very low concentrations. The amphipathic and surface properties of surfactins are related to the existence of the minor polar and major hydrophobic domains in the three 3-D conformations. In addition, the application potential of surfactin in bioremediation of oil spills and oil contaminants, and microbial enhanced oil recovery are discussed. PMID:25741767

Chemical Structure, Property and Potential Applications of Biosurfactants Produced by Bacillus subtilis in Petroleum Recovery and Spill Mitigation

Directory of Open Access Journals (Sweden)

Jin-Feng Liu

2015-03-01

Full Text Available Lipopeptides produced by microorganisms are one of the five major classes of biosurfactants known and they have received much attention from scientific and industrial communities due to their powerful interfacial and biological activities as well as environmentally friendly characteristics. Microbially produced lipopeptides are a series of chemical structural analogues of different families and, among them, 26 families covering about 90 lipopeptide compounds have been reported in the last two decades. This paper reviews the chemical structural characteristics and molecular behaviors of surfactin, one of the representative lipopeptides of the 26 families. In particular, two novel surfactin molecules isolated from cell-free cultures of Bacillus subtilis HSO121 are presented. Surfactins exhibit strong self-assembly ability to form sphere-like micelles and larger aggregates at very low concentrations. The amphipathic and surface properties of surfactins are related to the existence of the minor polar and major hydrophobic domains in the three 3-D conformations. In addition, the application potential of surfactin in bioremediation of oil spills and oil contaminants, and microbial enhanced oil recovery are discussed.

Ion transport by gating voltage to nanopores produced via metal-assisted chemical etching method

Science.gov (United States)

Van Toan, Nguyen; Inomata, Naoki; Toda, Masaya; Ono, Takahito

2018-05-01

In this work, we report a simple and low-cost way to create nanopores that can be employed for various applications in nanofluidics. Nano sized Ag particles in the range from 1 to 20 nm are formed on a silicon substrate with a de-wetting method. Then the silicon nanopores with an approximate 15 nm average diameter and 200 μm height are successfully produced by the metal-assisted chemical etching method. In addition, electrically driven ion transport in the nanopores is demonstrated for nanofluidic applications. Ion transport through the nanopores is observed and could be controlled by an application of a gating voltage to the nanopores.

Bio-based production of fuels and industrial chemicals by repurposing antibiotic-producing type I modular polyketide synthases: opportunities and challenges.

Science.gov (United States)

Yuzawa, Satoshi; Keasling, Jay D; Katz, Leonard

2017-04-01

Complex polyketides comprise a large number of natural products that have broad application in medicine and agriculture. They are produced in bacteria and fungi from large enzyme complexes named type I modular polyketide synthases (PKSs) that are composed of multifunctional polypeptides containing discrete enzymatic domains organized into modules. The modular nature of PKSs has enabled a multitude of efforts to engineer the PKS genes to produce novel polyketides of predicted structure. We have repurposed PKSs to produce a number of short-chain mono- and di-carboxylic acids and ketones that could have applications as fuels or industrial chemicals.

Bio-based production of fuels and industrial chemicals by repurposing antibiotic-producing type I modular polyketide synthases: opportunities and challenges

Energy Technology Data Exchange (ETDEWEB)

Yuzawa, Satoshi [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Systems and Engineering Division; Keasling, Jay D. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Systems and Engineering Division; Univ. of California, Berkeley, CA (United States). QB3 Inst.; Joint BioEnergy Inst. (JBEI), Emeryville, CA (United States); Univ. of California, Berkeley, CA (United States). Dept. of Bioengineering; Univ. of California, Berkeley, CA (United States). Dept. of Chemical and Biomolecular Engineering; Technical Univ. of Denmark, Horsholm (Denmark). Novo Nordisk Foundation Center for Biosustainability; Katz, Leonard [Univ. of California, Berkeley, CA (United States). QB3 Inst.

2016-11-16

Complex polyketides comprise a large number of natural products that have broad application in medicine and agriculture. They are produced in bacteria and fungi from large enzyme complexes named type I modular polyketide synthases (PKSs) that are composed of multifunctional polypeptides containing discrete enzymatic domains organized into modules. The modular nature of PKSs has enabled a multitude of efforts to engineer the PKS genes to produce novel polyketides of predicted structure. Finally, we have repurposed PKSs to produce a number of short-chain mono- and di-carboxylic acids and ketones that could have applications as fuels or industrial chemicals.

The effect of ultrasonic irradiation on the crystallinity of nano-hydroxyapatite produced via the wet chemical method

International Nuclear Information System (INIS)

Barbosa, Michelle C.; Messmer, Nigel R.; Brazil, Tayra R.; Marciano, Fernanda R.; Lobo, Anderson O.

2013-01-01

Nanohydroxyapatite (nHAp) powders were produced via aqueous precipitation by adopting four different experimental conditions, assisted or non-assisted by ultrasound irradiation (UI). The nHAp powders were characterized by X-ray diffraction, energy-dispersive X-ray fluorescence, Raman and attenuated total reflection Fourier transform infrared spectroscopies, which showed typical surface chemical compositions of nHAp. Analysis found strong connections between UI and the crystallization process, crystal growth properties, as well as correlations between calcination and substitution reactions. - Highlights: ► Nanohydroxyapatite powders were produced via aqueous precipitation. ► Three methodologies were compared, such as: dropwise, mixture and ultrasound irradiation (UI). ► Analysis found strong connections between UI and the crystallization process

The effect of ultrasonic irradiation on the crystallinity of nano-hydroxyapatite produced via the wet chemical method

Energy Technology Data Exchange (ETDEWEB)

Barbosa, Michelle C.; Messmer, Nigel R.; Brazil, Tayra R.; Marciano, Fernanda R.; Lobo, Anderson O., E-mail: loboao@yahoo.com

2013-07-01

Nanohydroxyapatite (nHAp) powders were produced via aqueous precipitation by adopting four different experimental conditions, assisted or non-assisted by ultrasound irradiation (UI). The nHAp powders were characterized by X-ray diffraction, energy-dispersive X-ray fluorescence, Raman and attenuated total reflection Fourier transform infrared spectroscopies, which showed typical surface chemical compositions of nHAp. Analysis found strong connections between UI and the crystallization process, crystal growth properties, as well as correlations between calcination and substitution reactions. - Highlights: ► Nanohydroxyapatite powders were produced via aqueous precipitation. ► Three methodologies were compared, such as: dropwise, mixture and ultrasound irradiation (UI). ► Analysis found strong connections between UI and the crystallization process.

Hippocampal low-frequency stimulation inhibits afterdischarge and increases GABA (A) receptor expression in amygdala-kindled pharmacoresistant epileptic rats.

Science.gov (United States)

Wu, Guofeng; Wang, Likun; Hong, Zhen; Ren, Siying; Zhou, Feng

2017-08-01

The purpose of the present study was to observe the effects of hippocampal low-frequency stimulation (Hip-LFS) on amygdala afterdischarge and GABA (A) receptor expression in pharmacoresistant epileptic (PRE) rats. A total of 110 healthy adult male Wistar rats were used to generate a model of epilepsy by chronic stimulation of the amygdala. Sixteen PRE rats were selected from 70 amygdala-kindled rats by testing their response to Phenytoin and Phenobarbital, and they were randomly assigned to a pharmacoresistant stimulation group (PRS group, 8 rats) or a pharmacoresistant control group (PRC group, 8 rats). A stimulation electrode was implanted into the hippocampus of all of the rats. Hip-LFS was administered twice per day in the PRS group for two weeks. Simultaneously, amygdala stimulus-induced seizures and afterdischarge were recorded. After the hippocampal stimulation was terminated, the brain tissues were obtained to determine the GABA (A) receptors by a method of immumohistochemistry and a real-time polymerase chain reaction. The stages and duration of the amygdala stimulus-induced epileptic seizures were decreased in the PRS group. The afterdischarge threshold was increased and the duration as well as the afterdischarge frequency was decreased. Simultaneously, the GABA (A) expression was significantly increased in the PRS group. Hip-LFS may inhibit amygdala stimulus-induced epileptic seizures and up-regulate GABA (A) receptor expression in PRE rats. The antiepileptic effects of hippocampal stimulation may be partly achieved by increasing the GABA (A) receptor.

Chemical characterization of the gels produced by the diazotrophic bacteria Rhizobium tropici and Mesorhizobium sp

International Nuclear Information System (INIS)

Monteiro, Nilson Kobori; Aranda-Selverio, Gabriel; Exposti, Diego Tadeu Degli; Silva, Maria de Lourdes Corradi da; Lemos, Eliana Gertrudes Macedo; Campanharo, Joao Carlos; Silveira, Joana Lea Meira

2012-01-01

The exopolysaccharides with characteristics of gel produced by Rhizobium tropici (EPSRT) and Mesorhizobium sp (EPSMR) are acidic heteropolysaccharide composed mainly of glucose and galactose in a molar ratio of 4:1 and 5:1 respectively, with traces of mannose (∼ 1%). Chemical analysis showed the presence of uronic acid, pyruvate and acetyl-substituents in the structures of both polymers. Experiments of gel permeation chromatography and polyacrylamide gel electrophoresis showed that EPSRT and EPSMR are homogeneous molecules with low grade of polydispersity. The EPS were characterized using spectroscopic techniques of FT-IR, 1 H and 13 C-NMR. (author)

Chemical allergens stimulate human epidermal keratinocytes to produce lymphangiogenic vascular endothelial growth factor.

Science.gov (United States)

Bae, Ok-Nam; Ahn, Seyeon; Jin, Sun Hee; Hong, Soo Hyun; Lee, Jinyoung; Kim, Eun-Sun; Jeong, Tae Cheon; Chun, Young-Jin; Lee, Ai-Young; Noh, Minsoo

2015-03-01

Allergic contact dermatitis (ACD) is a cell-mediated immune response that involves skin sensitization in response to contact with various allergens. Angiogenesis and lymphangiogenesis both play roles in the allergic sensitization process. Epidermal keratinocytes can produce vascular endothelial growth factor (VEGF) in response to UV irradiation and during wound healing. However, the effect of haptenic chemical allergens on the VEGF production of human keratinocytes, which is the primary contact site of toxic allergens, has not been thoroughly researched. We systematically investigated whether immune-regulatory cytokines and chemical allergens would lead to the production of VEGF in normal human keratinocytes (NHKs) in culture. VEGF production significantly increased when NHKs were treated with IFNγ, IL-1α, IL-4, IL-6, IL-17A, IL-22 or TNFα. Among the human sensitizers listed in the OECD Test Guideline (TG) 429, we found that CMI/MI, DNCB, 4-phenylenediamine, cobalt chloride, 2-mercaptobenzothiazole, citral, HCA, cinnamic alcohol, imidazolidinyl urea and nickel chloride all significantly upregulated VEGF production in NHKs. In addition, common human haptenic allergens such as avobenzone, formaldehyde and urushiol, also induced the keratinocyte-derived VEGF production. VEGF upregulation by pro-inflammatory stimuli, IFNγ, DNCB or formaldehyde is preceded by the production of IL-8, an acute inflammatory phase cytokine. Lymphangiogenic VEGF-C gene transcription was significantly increased when NHKs were treated with formaldehyde, DNCB or urushiol, while transcription of VEGF-A and VEGF-B did not change. Therefore, the chemical allergen-induced VEGF upregulation is mainly due to the increase in lymphangiogenic VEGF-C transcription in NHKs. These results suggest that keratinocyte-derived VEGF may regulate the lymphangiogenic process during the skin sensitization process of ACD. Copyright © 2015 Elsevier Inc. All rights reserved.

Gamma radiation and temperature influence on the chemical effect produced by isomeric transition in the telluric acid

International Nuclear Information System (INIS)

Muriel G, M.

1976-01-01

When the gamma radiation due to the isomeric transition is internally converted an autoionization is produced. For atoms with a high atomic number this autoionization can be a large one and produce a fragmentation in a molecule. In the specific case of the solid state these fragments remain trapped in different places of the crystalline system. This can be considered as chemical change in the original molecule. These damages produced by the nuclear transformation can be measured by different methods: heating, gamma rays, pressure, etc. In this work the results of an experimental measurement of the behavior of the crystalline telluric acid molecule fragments under gamma radiation (0 to 20 Mrads) with controlled temperature of 2 0 C (-196 0 C to 50 0 C) it is presented. It was observed that the values of the mentioned behavior vary rapidly at first for relatively low doses and that for larger doses these values remained constant. Besides with a lower temperature these variation are progressively lower. (author)

Effect of low frequency electrical stimulation on seizure-induced short- and long-term impairments in learning and memory in rats.

Science.gov (United States)

Esmaeilpour, Khadijeh; Sheibani, Vahid; Shabani, Mohammad; Mirnajafi-Zadeh, Javad

2017-01-01

Kindled seizures can impair learning and memory. In the present study the effect of low-frequency electrical stimulation (LFS) on kindled seizure-induced impairment in spatial learning and memory was investigated and followed up to one month. Animals were kindled by electrical stimulation of hippocampal CA1 area in a semi-rapid manner (12 stimulations per day). One group of animals received four trials of LFS at 30s, 6h, 24h, and 30h following the last kindling stimulation. Each LFS trial was consisted of 4 packages at 5min intervals. Each package contained 200 monophasic square wave pulses of 0.1ms duration at 1Hz. The Open field, Morris water maze, and novel object recognition tests were done 48h, 1week, 2weeks, and one month after the last kindling stimulation respectively. Kindled animals showed a significant impairment in learning and memory compared to control rats. LFS decreased the kindling-induced learning and memory impairments at 24h and one week following its application, but not at 2week or 1month after kindling. In the group of animals that received the same 4 trials of LFS again one week following the last kindling stimulation, the improving effect of LFS was observed even after one month. Obtained results showed that application of LFS in fully kindled animals has a long-term improving effect on spatial learning and memory. This effect can remain for a long duration (one month in this study) by increasing the number of applied LFS. Copyright © 2016 Elsevier Inc. All rights reserved.

Comparison of chemical, rheological and sensory properties of kefir produced by kefir grains and commercial kefir starter

Directory of Open Access Journals (Sweden)

Irena Barukčić

2017-01-01

Full Text Available The main objective of this study was to compare chemical, rheological and sensory characteristics of kefir produced by using kefir grains and kefir starter. The intent was also to investigate whether it is plausible to use a combined inoculum (kefir grains and starter in order to obtain a kefir with improved characteristics in terms of sensory and rheological characteristics. Kefir samples were produced at 25 °C and 35 °C by using starter culture XPL-1, kefir grains and their combinations. All of the produced kefir samples were analysed for acidity, total dry matter, ethanol content, syneresis, viscosity and were sensory evaluated by a specially trained panel. There were no significant differences considering the total dry matter, syneresis, ethanol content and acidity. Excess viscosity was observed in samples produced by starter culture at 35 °C, which was described as untypical, yoghurt like and unsatisfactory by a sensory panel. The sample produced at 25 °C by equal amounts of kefir grains and starter culture received the highest scores at sensory evaluation and showed the best potential for optimizing the further use. Further investigations need to focus on examining kefir properties during the storage period, especially regarding microbiological and sensory properties, ethanol content and texture profile.

Chemical defences against herbivores

DEFF Research Database (Denmark)

Pavia, Henrik; Baumgartner, Finn; Cervin, Gunnar

2012-01-01

This chapter focuses on the recent and emerging research involving chemical defences against herbivory in aquatic primary producers. It provides an overview of plant chemical defence theories and highlights recent research on aquatic primary producers addressing a number of aspects...... of these theories, concluding with new chemical approaches to tackle the questions and suggestions for future research directions. It explains that aquatic primary producers are a taxonomically and functionally diverse group of organisms that includes macroalgae, microalgae, and vascular plants. It also states...... that despite the fact that aquatic primary producers constitute a large and diverse group of organisms that vary in their evolutionary histories, selection for chemical defences to resist or reduce grazing are commonplace across the phylogenetic boundaries....

Physico-chemical properties of Pd nanoparticles produced by Pulsed Laser Ablation in different organic solvents

International Nuclear Information System (INIS)

Cristoforetti, Gabriele; Pitzalis, Emanuela; Spiniello, Roberto; Ishak, Randa; Giammanco, Francesco; Muniz-Miranda, Maurizio; Caporali, Stefano

2012-01-01

Palladium nanoparticles are arousing an increasing interest because of their strong activity in heterogeneous catalysis in a wide range of reactions. Driven by the interest of producing Pd nanoparticles to be deposited for catalysis over hydrophobic supports, we investigated their synthesis via Pulsed Laser Ablation in Liquid in several organic solvents, as acetone, ethanol, 2-propanol, toluene, n-hexane. The colloids were produced by using a Nd:YAG ns laser and without the addition of surfactant agents. The morphology, composition, stability and oxidation state of the obtained nanoparticles were investigated by TEM-EDS analysis, UV-vis spectroscopy, X-ray Photoelectron Spectroscopy and micro-Raman spectroscopy. The results evidence that the nature of the solvent influences both the yield and the physico-chemical properties of the produced nanoparticles. While in acetone and alcohols spheroidal, non aggregated and stable particles are obtained, in case of toluene and n-hexane few unstable particles surrounded by a gel-like material are produced. Raman/XPS measurements suggest the presence of amorphous or graphitic carbon onto crystalline Pd nanoparticles, which could have hindered their growth and determined the observed smaller sizes if compared to nanoparticles produced in water. The stability of Pd colloids obtained in acetone and alcohols was attributed to adsorbed anions like enolates or alcoholates; non polar solvents like toluene and n-hexane, unable to give rise to adsorbed anionic species, cannot provide any stabilization to the palladium nanoparticles. XPS analyses also evidenced a partial oxidation of particles surface, with a ratio Pd 2+ :Pd 0 of 1:2.5 and 1:4 in acetone and ethanol, respectively.

Bio-based production of fuels and industrial chemicals by repurposing antibiotic-producing type I modular polyketide synthases: opportunities and challenges

DEFF Research Database (Denmark)

Yuzawa, Satoshi; Keasling, Jay D.; Katz, Leonard

2017-01-01

Complex polyketides comprise a large number of natural products that have broad application in medicine and agriculture. They are produced in bacteria and fungi from large enzyme complexes named type I modular polyketide synthases (PKSs) that are composed of multifunctional polypeptides containin...... have applications as fuels or industrial chemicals....

Chemical Changes in Carbohydrates Produced by Thermal Processing.

Science.gov (United States)

Hoseney, R. Carl

1984-01-01

Discusses chemical changes that occur in the carbohydrates found in food products when these products are subjected to thermal processing. Topics considered include browning reactions, starch found in food systems, hydrolysis of carbohydrates, extrusion cooking, processing of cookies and candies, and alterations in gums. (JN)

Chemical effects of nuclear transformations

Energy Technology Data Exchange (ETDEWEB)

Bulbulian, S

1982-06-01

A brief survey of the present state of knowledge on the chemical effects of nuclear transformations is presented. The recoil energy produced by these transformations in the nuclide is often sufficiently high to disrupt the chemical ligands between these particular atoms affected by the nuclear transformations, while the rest of their molecules. It also contains a discussion of the different annealing processes that produce the cancellation of the chemical change produced by the nuclear transformation.

The effect of ultrasonic irradiation on the crystallinity of nano-hydroxyapatite produced via the wet chemical method.

Science.gov (United States)

Barbosa, Michelle C; Messmer, Nigel R; Brazil, Tayra R; Marciano, Fernanda R; Lobo, Anderson O

2013-07-01

Nanohydroxyapatite (nHAp) powders were produced via aqueous precipitation by adopting four different experimental conditions, assisted or non-assisted by ultrasound irradiation (UI). The nHAp powders were characterized by X-ray diffraction, energy-dispersive X-ray fluorescence, Raman and attenuated total reflection Fourier transform infrared spectroscopies, which showed typical surface chemical compositions of nHAp. Analysis found strong connections between UI and the crystallization process, crystal growth properties, as well as correlations between calcination and substitution reactions. Copyright © 2013 Elsevier B.V. All rights reserved.

[Chemical weapons and chemical terrorism].

Science.gov (United States)

Nakamura, Katsumi

2005-10-01

Chemical Weapons are kind of Weapons of Mass Destruction (WMD). They were used large quantities in WWI. Historically, large quantities usage like WWI was not recorded, but small usage has appeared now and then. Chemical weapons are so called "Nuclear weapon for poor countrys" because it's very easy to produce/possession being possible. They are categorized (1) Nerve Agents, (2) Blister Agents, (3) Cyanide (blood) Agents, (4) Pulmonary Agents, (5) Incapacitating Agents (6) Tear Agents from the viewpoint of human body interaction. In 1997 the Chemical Weapons Convention has taken effect. It prohibits chemical weapons development/production, and Organization for the Prohibition of Chemical Weapons (OPCW) verification regime contributes to the chemical weapons disposal. But possibility of possession/use of weapons of mass destruction by terrorist group represented in one by Matsumoto and Tokyo Subway Sarin Attack, So new chemical terrorism countermeasures are necessary.

Alternative, Renewable and Novel Feedstocks for Producing Chemicals

Energy Technology Data Exchange (ETDEWEB)

none,

2007-07-01

Vision2020 and ITP directed the Alternative, Renewable and Novel Feedstocks project to identify industrial options and to determine the work required to make alternative, renewable and novel feedstock options attractive to the U.S. chemicals industry. This report presents the Alternative, Renewable and Novel Feedstocks project findings which were based on a technology review and industry workshop.

Extraction tools for identification of chemical contaminants in estuarine and coastal waters to determine toxic pressure on primary producers.

Science.gov (United States)

Booij, Petra; Sjollema, Sascha B; Leonards, Pim E G; de Voogt, Pim; Stroomberg, Gerard J; Vethaak, A Dick; Lamoree, Marja H

2013-09-01

The extent to which chemical stressors affect primary producers in estuarine and coastal waters is largely unknown. However, given the large number of legacy pollutants and chemicals of emerging concern present in the environment, this is an important and relevant issue that requires further study. The purpose of our study was to extract and identify compounds which are inhibitors of photosystem II activity in microalgae from estuarine and coastal waters. Field sampling was conducted in the Western Scheldt estuary (Hansweert, The Netherlands). We compared four different commonly used extraction methods: passive sampling with silicone rubber sheets, polar organic integrative samplers (POCIS) and spot water sampling using two different solid phase extraction (SPE) cartridges. Toxic effects of extracts prepared from spot water samples and passive samplers were determined in the Pulse Amplitude Modulation (PAM) fluorometry bioassay. With target chemical analysis using LC-MS and GC-MS, a set of PAHs, PCBs and pesticides was determined in field samples. These compound classes are listed as priority substances for the marine environment by the OSPAR convention. In addition, recovery experiments with both SPE cartridges were performed to evaluate the extraction suitability of these methods. Passive sampling using silicone rubber sheets and POCIS can be applied to determine compounds with different structures and polarities for further identification and determination of toxic pressure on primary producers. The added value of SPE lies in its suitability for quantitative analysis; calibration of passive samplers still needs further investigation for quantification of field concentrations of contaminants. Copyright © 2013 Elsevier Ltd. All rights reserved.

Produced water - composition and analysis

International Nuclear Information System (INIS)

Kvernheim, Arne Lund

1998-01-01

Produced water can be defined as ''High volume waste-water separated from oil and gas that is produced from subsurface formations''. The water contains aliphatic and aromatic hydrocarbons, particulate matter and soluble salts as well as elements originating from formations and from sea water injections. Residues of chemicals may also be present. The accepted North Sea discharge limit is 40 ppm. In this presentation the focus will be on the chemical composition of produced water and on the challenges involved in developing and implementing analytical methods. The focus will also be on the development of a new oil-in-water analytical method as a replacement for the Freon method. 7 refs., 1 tab

Chemical evaluation of strawberry plants produced by tissue culturing of gamma irradiated seedlings

International Nuclear Information System (INIS)

Maraei, R.W.

2007-01-01

studies were conducted to evaluate the influence of gamma irradiation as a supplementary factor precedes tissue culture application on strawberry seedlings (c.v.Rosa Linda). the strawberry seedling were irradiated using 8 doses of co 60 gamma rays 50.75.100.125 ,150,250, 350 and 500 gray. tissue culture technique was applied on irradiated and unirradiated strawberry seedling. different characteristics of plantlets, plant and fruit of strawberry produced from the double treatment (irradiation followed by tissue culture) were studied as well as the early, total and exportable fruit yields. data indicated that, low radiation doses 50,75 and 100 gray increased all morphological and chemical characteristics of the plantlets, plant and fruit of strawberry, whereas radiation doses higher than 100 gray decreased them significantly. moreover 350 and gray were lethal doses. radiation dose 50 gray increased the survival percentage and the length of plantlets by 1.5% and 50% respectively more than the unirradiated treatment in all multiplication stages

Preliminary viability studies of fibroblastic cells cultured on microcrystalline and nanocrystalline diamonds produced by chemical vapour deposition method

Directory of Open Access Journals (Sweden)

Ana Amélia Rodrigues

2013-02-01

Full Text Available Implant materials used in orthopedics surgery have demonstrated some disadvantages, such as metallic corrosion processes, generation of wear particles, inflammation reactions and bone reabsorption in the implant region. The diamond produced through hot-filament chemical vapour deposition method is a new potential biomedical material due to its chemical inertness, extreme hardness and low coefficient of friction. In the present study we analysis two samples: the microcrystalline diamond and the nanocrystalline diamond. The aim of this study was to evaluate the surface properties of the diamond samples by scanning electron microscopy, Raman spectroscopy and atomic force microscopy. Cell viability and morphology were assessed using thiazolyl blue tetrazolium bromide, cytochemical assay and scanning electron microscopy, respectively. The results revealed that the two samples did not interfere in the cell viability, however the proliferation of fibroblasts cells observed was comparatively higher with the nanocrystalline diamond.

Chemical Composition and Pharmacological Effects of Geopropolis Produced by Melipona quadrifasciata anthidioides.

Science.gov (United States)

Dos Santos, Cintia Miranda; Campos, Jaqueline Ferreira; Dos Santos, Helder Freitas; Balestieri, José Benedito Perrella; Silva, Denise Brentan; de Picoli Souza, Kely; Carollo, Carlos Alexandre; Estevinho, Leticia M; Dos Santos, Edson Lucas

2017-01-01

Stingless bees produce geopropolis, which is popularly described for its medicinal properties, but for which few scientific studies have demonstrated pharmacological effects. The objective of this study was to investigate the chemical composition of the geopropolis of Melipona quadrifasciata anthidioides and to evaluate its antioxidant, antimutagenic, anti-inflammatory, and antimicrobial activities. The composition of the hydroethanolic extract of geopropolis (HEG) included di- and trigalloyl and phenylpropanyl heteroside derivatives, flavanones, diterpenes, and triterpenes. HEG showed antioxidant action via the direct capture of free radicals and by inhibiting the levels of oxidative hemolysis and malondialdehyde in human erythrocytes under oxidative stress. HEG also reduced the frequency of gene conversion and the number of mutant colonies of S. cerevisiae . The anti-inflammatory action of HEG was demonstrated by the inhibition of hyaluronidase enzyme activity. In addition, HEG induced cell death in all evaluated gram-positive bacteria, gram-negative bacteria, and yeasts, including clinical isolates with antimicrobial drug resistance. Collectively, these results demonstrate the potential of M. q. anthidioides geopropolis for the prevention and treatment of various diseases related to oxidative stress, mutagenesis, inflammatory processes, and microbial infections.

Chemical Composition and Pharmacological Effects of Geopropolis Produced by Melipona quadrifasciata anthidioides

Directory of Open Access Journals (Sweden)

Cintia Miranda dos Santos

2017-01-01

Full Text Available Stingless bees produce geopropolis, which is popularly described for its medicinal properties, but for which few scientific studies have demonstrated pharmacological effects. The objective of this study was to investigate the chemical composition of the geopropolis of Melipona quadrifasciata anthidioides and to evaluate its antioxidant, antimutagenic, anti-inflammatory, and antimicrobial activities. The composition of the hydroethanolic extract of geopropolis (HEG included di- and trigalloyl and phenylpropanyl heteroside derivatives, flavanones, diterpenes, and triterpenes. HEG showed antioxidant action via the direct capture of free radicals and by inhibiting the levels of oxidative hemolysis and malondialdehyde in human erythrocytes under oxidative stress. HEG also reduced the frequency of gene conversion and the number of mutant colonies of S. cerevisiae. The anti-inflammatory action of HEG was demonstrated by the inhibition of hyaluronidase enzyme activity. In addition, HEG induced cell death in all evaluated gram-positive bacteria, gram-negative bacteria, and yeasts, including clinical isolates with antimicrobial drug resistance. Collectively, these results demonstrate the potential of M. q. anthidioides geopropolis for the prevention and treatment of various diseases related to oxidative stress, mutagenesis, inflammatory processes, and microbial infections.

Synthesis and evaluation of MgF2 coatings by chemical conversion on magnesium alloys for producing biodegradable orthopedic implants of temporary use

International Nuclear Information System (INIS)

Casanova, P Y; Jaimes, K J; Parada, N J; Viejo, F; Hernández-Barrios, C A; Aparicio, M; Coy, A E

2013-01-01

The aim of the present work was the synthesis of biodegradable MgF 2 coatings by chemical conversion on the commercial Elektron 21 and AZ91D magnesium alloys, in aqueous HF solutions for different concentrations and temperatures. The chemical composition and morphology of the coatings were analyzed by scanning electron microscopy (SEM-EDX) and X-ray diffraction (XRD). On the other hand, their corrosion behavior was evaluated by gravimetric and electrochemical measurements in Hank's solution at 37°C for different immersion times. The experimental results revealed that chemical conversion in HF produced MgF 2 coatings which corrosion resistance was enhanced by increasing the HF concentration. Further, the microstructure and composition of the base alloy played a key role on the growth and degradation mechanisms of the MgF 2 coatings

Polysaccharide-producing microalgae

Energy Technology Data Exchange (ETDEWEB)

Braud, J.P.; Chaumont, D.; Gudin, C.; Thepenier, C.; Chassin, P.; Lemaire, C.

1982-11-01

The production of extracellular polysaccharides is studied with Nostoc sp (cyanophycus), Porphiridium cruentum, Rhodosorus marinus, Rhodella maculata (rhodophyci) and Chlamydomonas mexicana (chlorophycus). The polysaccharides produced are separated by centrifugation of the culture then precipitation with alcohol. Their chemical structure was studied by infrared spectrometry and acid hydrolysis. By their rheological properties and especially their insensitivity to temperatrure and pH variations the polysaccharides produced by Porphryridium cruentum and Rhodella maculata appear as suitable candidates for industrial applications.

Chemical composition of chicken meat produced in extensive indoor ...

African Journals Online (AJOL)

Cooled carcasses were dissected into primal cuts. Breast and leg muscle (thigh and drumstick) samples were used for chemical analyses. The obtained results suggested that free range rearing system was more favourable than extensive indoor system, as it resulted in a significantly higher protein content and a lower fat ...

Comparison of Chemical and Enzymatic Interesterification of Fully Hydrogenated Soybean Oil and Walnut Oil to Produce a Fat Base with Adequate Nutritional and Physical Characteristics

Directory of Open Access Journals (Sweden)

Mariel Farfán

2015-01-01

Full Text Available The optimal physical, chemical and nutritional properties of natural lipids depend on the structure and composition of triacylglycerols. However, they are not always mutually compatible. Lipid modification is a good way to give them specific functionalities, increase their oxidative stability, or improve their nutritional value. As such, chemical and enzymatic interesterification may be used to modify them and produce structured lipids. In accordance, the aim of this study is to compare chemical and enzymatic interesterifi cation of binary blends of fully hydrogenated soybean oil and walnut oil, using sodium methoxide or Lipozyme TL IM, respectively, to produce a fat base with adequate nutritional and physical characteristics. Three different mass ratios of fully hydrogenated soybean oil and walnut oil blends (20:80, 40:60 and 60:40 were interesterified and evaluated. Total interesterification was determined by the stabilization of the solid fat content. Chemical reaction of the 20:80 blend was completed in 10 min and of the 40:60 and 60:40 blends in 15 min. Enzymatically interesterified blends were stabilized in 120 min at all of the mass ratios. Complete interesterification significantly reduced the solid fat content of the blends at any composition. Chemical and enzymatically interesterified fully hydrogenated blend of soybean and walnut oil at mass ratio of 40:60 showed the plastic curve of an all-purpose-type shortening rich in polyunsaturated fatty acids, with a high linolenic acid (C18:3n3 content and with zero trans-fatty acids.

Chemical, chromatic, and sensory attributes of 6 red wines produced with prefermentative cold soak.

Science.gov (United States)

Casassa, L Federico; Bolcato, Esteban A; Sari, Santiago E

2015-05-01

Six red grape cultivars, Barbera D'Asti, Cabernet Sauvignon, Malbec, Merlot, Pinot Noir and Syrah, were produced with or without prefermentative cold soak (CS). Cold soak had no effect on the basic chemical composition of the wines. At pressing, CS wines were more saturated and with a higher red component than control wines. After 1 year of bottle aging, CS wines retained 22% more anthocyanins than control wines, but tannins and total phenolics remained unaffected. Both saturation and the red component of colour were slightly higher in CS wines. From a sensory standpoint, CS only enhanced colour intensity in Barbera D'Asti and Cabernet Sauvignon wines, whereas it diminished colour intensity in Pinot Noir. Cold soak had no effect on perceived aroma, bitterness, astringency, and body of the wines. Principal Component Analysis suggested that the outcome of CS is contingent upon the specific cultivar to which the CS technique is applied. Copyright © 2014 Elsevier Ltd. All rights reserved.

Synthetic Biology for Specialty Chemicals.

Science.gov (United States)

Markham, Kelly A; Alper, Hal S

2015-01-01

In this review, we address recent advances in the field of synthetic biology and describe how those tools have been applied to produce a wide variety of chemicals in microorganisms. Here we classify the expansion of the synthetic biology toolbox into three different categories based on their primary function in strain engineering-for design, for construction, and for optimization. Next, focusing on recent years, we look at how chemicals have been produced using these new synthetic biology tools. Advances in producing fuels are briefly described, followed by a more thorough treatment of commodity chemicals, specialty chemicals, pharmaceuticals, and nutraceuticals. Throughout this review, an emphasis is placed on how synthetic biology tools are applied to strain engineering. Finally, we discuss organism and host strain diversity and provide a future outlook in the field.

Tekna's produced water conference 2005

International Nuclear Information System (INIS)

2005-01-01

The conference has 22 presentations discussing topics on discharge reduction, produced water quality, produced water re-injection, chemicals particularly environmentally friendly ones, separation technology, reservoir souring, total water management systems, pollution, oil in water problems and platform operation. Various field tests and experiences particularly from the offshore petroleum sector are presented (tk)

Study of discharges produced by surface waves under medium and high pressure: application to chemical analysis

International Nuclear Information System (INIS)

Laye epouse Granier, Agnes

1986-01-01

This report deals with the study of microwave discharges produced in argon gas by surface waves in the 20-760 Torr pressure range. Application to chemical analysis by emission optical spectroscopy is also investigated. First of all we study the propagation of a surface wave in a bounded plasma in which the effective collision frequency for momentum transfer ν is higher than the excitation one. The axial electron density profile is determined from two diagnostic techniques, i.e., phase variations of the wave field and Stark broadening of H β line. Then we deduce the discharge characteristics ν, θ (maintaining power of an electron-ion pair) and E eff (effective electric field for discharge sustaining) from the electron density profile. Then an energy balance of the discharge is developed. It explains the change of operating conditions in the 20-50 Torr range. At low pressure the discharge is governed by ambipolar diffusion whereas at high pressure, the electrons are mainly lost by volume recombination of Ar 2 + . Finally, we report on chemical analysis experiment of gases (optimum sensibility in found near 100 Torr) and of metallic solutions sprayed by a graphite oven. Performances of such a design and ICP plasma torches are compared. (author) [fr

TEM Microstructure and Chemical Composition of Transition Zone Between Steel Tube and An Inconel 625 Weld Overlay Coating Produced by CMT Method

Directory of Open Access Journals (Sweden)

Rozmus-Górnikowska M.

2017-06-01

Full Text Available The aim of this work was to investigate the microstructure and chemical composition of the transition zone between 16Mo3 steel and Inconel 625 weld overlay coating produced by the Cold Metal Transfer (CMT method. Investigations were primarily carried out through transmission electron microscopy (TEM on thin foils prepared by FIB (Focus Ion Beam.

Some chemical properties of nisin produced by lactococcus lactis

International Nuclear Information System (INIS)

Hussein, H.; Abdel Karem, H.; El-Hadedy, D.; Badr, S.

2010-01-01

The present study was carried out to study the properties of nisin produced by lactococcus lactis FG 2 isolated from local un fated cheese. The maximum anti-microbial effect of pure nisin was occurred at ph 6 and 7. Nisin was heat stable from 40 to 90 degree C for 30 min. Molecular weight of nisin was determined by SDS-PAGE, it was 3.0 kDa and after irradiated the microbial cells to 1.5 kGy dose level the molecular weight increased to 3.5 t kDa then decreased at 2 kGy . Storage for two weeks it appeared in dimmer means and had a molecular weight 7 kDa . Using amino acid analyzer reveled that nisin contained a majority of nonpolar amino acids and exhibited cystine in composition . Nisin produced in whey have higher activity than nisin produced in MRS medium but both had the same structure. The results proved that nisin gene is in coded in chromosome and not with plasmid.

Çakır et al., Afr J Tradit Complement Altern Med. (2016) 13(2):223 ...

African Journals Online (AJOL)

asus

attack, oxidative stress occurs, free radicals are produced and membrane lipid peroxidation happens, all of which cause tissue damage (İlhan et al., 2005). .... in memory to store data was used for the physical exercise. In order to avoid any .... exercise retarded amygdala kindling development in rats. One of the mechanisms ...

Chemical effects produced by the ionizing radiation in the mercury beating heart reaction

International Nuclear Information System (INIS)

Castillo-Rojas, S.; Burillo, G.; Gonzalez-Chavez, J.L.; Vicente, L.

2002-01-01

Complete text of publication follows. In a recent paper we have shown the existence of complex modes of oscillation in the study of the extinction dynamics of the mercury beating heart reaction. It was proposed that one of the species responsible for the oscillatory movements of this reaction is the mercury(I), in anyone in their forms, either free or molecular. the formation of Hg 2 2+ from γ irradiation of 60 Co to the system Hg 0 /H 2 SO 4 (6M) allowed to elucidate the probable mechanism of reaction. The objective of this work is to study how the ionizing radiation affects the dynamics of extinction of this reaction, which is related with the existence of certain chemical species. The study was carried out in 2 ways: a) Method I: H 2 SO 4 (6M) was first irradiated and to the irradiated solution the Hg 0 was added and b) Method II: the system Hg 0 /H 2 SO 4 (6M) was irradiated. The different irradiated systems were put into reaction with Fe 0 to investigate if there were differences between the two irradiated systems and how the complex modes of oscillation of the reaction were affected. The quantity of Hg 2 2+ produced by method I is bigger than in method II. This is explained because the majority species produced by radiolysis of H 2 SO 4 are sulfate radical and H 2 O 2 that act as oxidizer agents and their potential values allow to suppose that these substances react with Hg 0 to produce Hg 2 2+ . On the other hand, by method II mercury clusters (Hg 4 3+ ) are formed as was reported by Sukhov and Ershov in pulse radiolysis of aqueous Hg 2 2+ solutions. We assume that the formation of these mercury clusters has to be observed with the decrease of the Hg 2 2+ concentration when one makes the radiolysis by method II. In general, the preliminary studies allow establishing that the ionizing radiation does not affect the extinction dynamics but it increases the half-life of this reaction

Chemical and physical factors which control the substitution reactions of direct fission-produced iodine with gaseous methane and the methyl halides

International Nuclear Information System (INIS)

Kikuchi, M.; Church, L.B.

1976-01-01

The factors controlling the hydrogen and halogen substitution reactions resulting from direct fission-produced iodine isotopes (*I) with gaseous methane and methyl halides were investigated. The chemical reaction probabilities, corrected for any secondary decomposition, were compared as a function of various chemical and physical parameters. These include carbon-halogen bond strength, halogen electronegativity, volume and cross sectional area of the substituted and neighboring atoms. On the basis of this analysis, it is concluded that *I-for-X (where X = H, F, Cl, Br and I) substitution reactions are controlled by the cross sectional area of the X atom. The *I-for-H substitution probability is reduced in proportion to the volume of X, suggesting that steric interference is the dominant factor influencing the reaction probability. (orig.) [de

Exopolysaccharides produced by lactic acid bacteria

NARCIS (Netherlands)

Caggianiello, Graziano; Kleerebezem, Michiel; Spano, Giuseppe

2016-01-01

A wide range of lactic acid bacteria (LAB) is able to produce capsular or extracellular polysaccharides, with various chemical compositions and properties. Polysaccharides produced by LAB alter the rheological properties of the matrix in which they are dispersed, leading to typically viscous and

Chemical and ruminal in vitro evaluation of Canadian canola meals produced over 4 years.

Science.gov (United States)

Broderick, Glen A; Colombini, Stefania; Costa, Sara; Karsli, Mehmet A; Faciola, Antonio P

2016-10-01

To test the effects of year and processing plant on the nutritional value of canola meal (CM), 3 CM samples/yr were collected from each of 12 Canadian production plants over 4yr (total=144). Samples of CM were analyzed for differences in chemical composition and for in vitro ruminal protein degradability using the Michaelis-Menten inhibitor in vitro (MMIIV) method. In the MMIIV method, protein degradation rate (kd) was estimated by 2 methods: from net release (i.e., blank corrected) of (1) ammonia plus AA determined by o-phthaldialdehyde fluorescence (OPAF) assay or (2) ammonia, AA, plus oligopeptides determined by o-phthaldialdehyde absorbance (OPAA) assay; rumen-undegradable protein (RUP) was computed assuming passage rates of 0.16 and 0.06/h for, respectively, soluble and insoluble protein. Casein, solvent soybean meal (SSBM), and expeller soybean meal (ESBM) were included in all incubations as standard proteins. Differences among years and plants were assessed using the mixed procedures of SAS. Small but significant differences were found in CM among years for chemical composition, including N solubility; some of these differences may have been related to changes in our analytical methods over time. However, adjustment of degradation activity of individual in vitro incubations based on the mean degradation activity over all incubations yielded kd and RUP that did not differ by year using either assay. Simultaneously incubating CM samples from 2yr in the same in vitro runs confirmed that no year effects existed for kd or RUP. Differences existed in chemical composition of CM among the 12 processing plants over the 4yr of sample collection. Moreover, consistent differences in kd and RUP were observed among plants: kd ranged from 0.069 to 0.113/h (OPAA assay) and 0.075 to 0.120/h (OPAF assay), and RUP estimates ranged from 51 to 43% (OPAA assay) and 49 to 41% (OPAF assay). Regression of kd on insoluble N content of CM yielded correlation coefficients (R(2

Review on advanced of solar assisted chemical heat pump dryer for agriculture produce

International Nuclear Information System (INIS)

Fadhel, M.I.; Sopian, K.; Daud, W.R.W.; Alghoul, M.A.

2011-01-01

Over the past three decades there has been nearly exponential growth in drying R and D on a global scale. Improving of the drying operation to save energy, improve product quality as well as reduce environmental effect remained as the main objectives of any development of drying system. A solar assisted chemical heat pump dryer is a new solar drying system, which have contributed to better cost-effectiveness and better quality dried products as well as saving energy. A solar collector is adapted to provide thermal energy in a reactor so a chemical reaction can take place. This reduces the dependency of the drying technology on fossil energy for heating. In this paper a review on advanced of solar assisted chemical heat pump dryer is presented (the system model and the results from experimental studies on the system performance are discussed). The review of heat pump dryers and solar assisted heat pump dryer is presented. Description of chemical heat pump types and the overview of chemical heat pump dryer are discussed. The combination of chemical heat pump and solar technology gives extra efficiency in utilizing energy. (author)

Practical use of chemical probes for reactive oxygen species produced in biological systems by {gamma}-irradiation

Energy Technology Data Exchange (ETDEWEB)

Lee, Min Hee; Moon, Yu Ran; Chung, Byung Yeoup; Kim, Jae-Sung [Radiation Research Division for Bio-technology, Korea Atomic Energy Research Institute, 1266 Sinjeong-dong, Jeongeup-si, Jeollabuk-do 580-185 (Korea, Republic of); Lee, Kang-Soo [Crop Production and Technology Major, Chonbuk National University, Jeonju 561-756 (Korea, Republic of); Cho, Jae-Young [Bio-environmental Science Major, Chonbuk National University, Jeonju 561-756 (Korea, Republic of); Kim, Jin-Hong [Radiation Research Division for Bio-technology, Korea Atomic Energy Research Institute, 1266 Sinjeong-dong, Jeongeup-si, Jeollabuk-do 580-185 (Korea, Republic of)], E-mail: jhongkim@kaeri.re.kr

2009-05-15

Application of chemical probes, for detection of reactive oxygen species (ROS), was tested during {gamma}-irradiation. The ethanol/{alpha}-(4-pyridyl-1-oxide)-N-tert-butylnitrone (4-POBN) and 3,3'-diaminobenzidine (DAB) were structurally stable enough to detect {sup {center_dot}}OH and H{sub 2}O{sub 2}, increasingly generated by {gamma}-irradiation up to 1000 Gy. Interestingly, the production rate of H{sub 2}O{sub 2}, but not {sup {center_dot}}OH, during {gamma}-irradiation, was significantly different between in vitro systems of lettuce and spinach. These results suggest that 4-POBN and DAB could be utilized as a semi-quantitative probe to quantify {sup {center_dot}}OH and H{sub 2}O{sub 2}, produced by {gamma}-irradiation up to 1000 Gy.

Toxicological characterization of chemicals produced from laser irradiation of graphite composite materials

International Nuclear Information System (INIS)

Kwan, J.

1990-11-01

One of the major potential hazards associated with laser machining of graphite composite materials is the toxic fumes and gases that are generated. When exposed to the intense energy of the laser beam, the organic polymer matrix of the composite material may decompose into various toxic by-products. To advance the understanding of the laser machining process from a health and safety viewpoint, this particular study consisted of the following steps: collect and analyze gaseous by-products generated during laser machining; collect particulates generated during laser machining and chemically extract them to determine the chemical species that may have absorbed or recondensed onto these particles; and review and evaluate the toxicity of the identified chemical species

Experimental setup for producing tungsten coated graphite tiles using plasma enhanced chemical vapor deposition technique for fusion plasma applications

International Nuclear Information System (INIS)

Chauhan, Sachin Singh; Sharma, Uttam; Choudhary, K.K.; Sanyasi, A.K.; Ghosh, J.; Sharma, Jayshree

2013-01-01

Plasma wall interaction (PWI) in fusion grade machines puts stringent demands on the choice of materials in terms of high heat load handling capabilities and low sputtering yields. Choice of suitable material still remains a challenge and open topic of research for the PWI community. Carbon fibre composites (CFC), Beryllium (Be), and Tungsten (W) are now being considered as first runners for the first wall components of future fusion machines. Tungsten is considered to be one of the suitable materials for the job because of its superior properties than carbon like low physical sputtering yield and high sputter energy threshold, high melting point, fairly high re-crystallization temperature, low fuel retention capabilities, low chemical sputtering with hydrogen and its isotopes and most importantly the reparability with various plasma techniques both ex-situ and in-situ. Plasma assisted chemical vapour deposition is considered among various techniques as the most preferable technique for fabricating tungsten coated graphite tiles to be used as tokamak first wall and target components. These coated tiles are more favourable compared to pure tungsten due to their light weight and easier machining. A system has been designed, fabricated and installed at SVITS, Indore for producing tungsten coated graphite tiles using Plasma Enhanced Chemical Vapor Deposition (PE-CVD) technique for Fusion plasma applications. The system contains a vacuum chamber, a turbo-molecular pump, two electrodes, vacuum gauges, mass analyzer, mass flow controllers and a RF power supply for producing the plasma using hydrogen gas. The graphite tiles will be put on one of the electrodes and WF6 gas will be inserted in a controlled manner in the hydrogen plasma to achieve the tungsten-coating with WF6 dissociation. The system is integrated at SVITS, Indore and a vacuum of the order of 3*10 -6 is achieved and glow discharge plasma has been created to test all the sub-systems. The system design with

Method of producing molybdenum-99

Science.gov (United States)

Pitcher, Eric John

2013-05-28

Method of producing molybdenum-99, comprising accelerating ions by means of an accelerator; directing the ions onto a metal target so as to generate neutrons having an energy of greater than 10 MeV; directing the neutrons through a converter material comprising techentium-99 to produce a mixture comprising molybdenum-99; and, chemically extracting the molybdenum-99 from the mixture.

Chemical effects of radiation

International Nuclear Information System (INIS)

Philips, G.O.

1986-01-01

Ionizing radiations initiate chemical changes in materials because of the high energy of their quanta. In water, highly reactive free radicals are produced which can initiate secondary changes of solutes, and in chemical of biological molecules in contact with the water. Free radicals can also be directly produced in irradiated medical products. Their fate can be identified and the molecular basis of radiation inactivation clarified. Methods have now been developed to protect and minimise such radiation damage. (author)

Solvent-tolerant bioconversion: Construction and analysis of a phenol producing Pseudomonas putida S12

OpenAIRE

Wierckx, N.J.P.

2009-01-01

Organic chemicals play a fundamental role in modern civilization. Today, almost all of these chemicals are produced from oil. This leads to pollution and creates a dependency on often politically unstable oil producing countries. It is possible to make the same chemicals from sugar, using microorganisms. Sugar is produced from plants, and is therefore an environmentally friendlier and almost inexhaustible resource. Unfortunately many interesting chemicals are toxic to microorganims at low con...

Effect of riboflavin-producing bacteria against chemically induced colitis in mice.

Science.gov (United States)

Levit, R; Savoy de Giori, G; de Moreno de LeBlanc, A; LeBlanc, J G

2018-01-01

To assess the anti-inflammatory effect associated with individual probiotic suspensions of riboflavin-producing lactic acid bacteria (LAB) in a colitis murine model. Mice intrarectally inoculated with trinitrobenzene sulfonic acid (TNBS) were orally administered with individual suspensions of riboflavin-producing strains: Lactobacillus (Lact.) plantarum CRL2130, Lact. paracasei CRL76, Lact. bulgaricus CRL871 and Streptococcus thermophilus CRL803; and a nonriboflavin-producing strain or commercial riboflavin. The extent of colonic damage and inflammation and microbial translocation to liver were evaluated. iNOs enzyme was analysed in the intestinal tissues and cytokine concentrations in the intestinal fluids. Animals given either one of the four riboflavin-producing strains showed lower macroscopic and histologic damage scores, lower microbial translocation to liver, significant decreases of iNOs+ cells in their large intestines and decreased proinflammatory cytokines, compared with mice without treatment. The administration of pure riboflavin showed similar benefits. Lact. paracasei CRL76 accompanied its anti-inflammatory effect with increased IL-10 levels demonstrating other beneficial properties in addition to the vitamin production. Administration of riboflavin-producing strains prevented the intestinal damage induced by TNBS in mice. Riboflavin-producing phenotype in LAB represents a potent tool to select them for preventing/treating IBD. © 2017 The Society for Applied Microbiology.

Evaluation of the Physico-Chemical Properties of Produced Water ...

African Journals Online (AJOL)

ADOWIE PERE

Samples were obtained at different periods within two months. Produced water ... sometimes, naturally occurring radioactive materials .... particular sample of soil, water, or air (Khatib and ... several other elements in solution particularly Barium.

Chemical and Sensory Properties Evaluation of Pandesal Bread Produced From Wheat and Milkfish (Chanos chanos Flour Mixtures

Directory of Open Access Journals (Sweden)

Raymund B. Moreno

2018-02-01

Full Text Available This research was conducted to determine the chemical composition of pandesal bread produced from wheat and milkfish flour mixtures. This study also aimed to investigate the sensory level of acceptability of pandesal bread produced from wheat and milkfish flour mixtures as to appearance, aroma, taste, texture and general acceptability in 0%, 5%, 10% and 15% proportions of milkfish flour. Based on the findings of the study, the percentage of most acceptable treatment which is 95 % wheat flour with 5 % milkfish flour were; moisture content, crude protein, total fat, ash, carbohydrate and energy were 21.3, 10.9, 5.72, 1.58, 60.5 g/100 g. and 337 Kcal/100 g. respectively. In terms of appearance, aroma, texture, flavor, and general acceptability, significant differences were determined in the level of sensory acceptability of pandesal bread produced from wheat and milkfish flour mixtures with different proportions. The findings of this study also showed that there is a relation as to the proportional percentage of the different treatments in the sensory acceptability of the bangus pandesal – the lower the percentage of the milkfish flour added, the higher is the sensory acceptability of the finished product in terms of texture, taste and the general acceptability as a whole. As a recommendation, the results of adding milkfish flour into pandesal bread will be made the baseline database, using the information obtained, as a useful point of reference for further studies and to improve existing products and food processes, as well as for the development of new ones.

Optical and Chemical Characterization of Aerosols Produced from Cooked Meats

Science.gov (United States)

Niedziela, R. F.; Foreman, E.; Blanc, L. E.

2011-12-01

Cooking processes can release a variety compounds into the air immediately above a cooking surface. The distribution of compounds will largely depend on the type of food that is being processed and the temperatures at which the food is prepared. High temperatures release compounds from foods like meats and carry them away from the preparation surface into cooler regions where condensation into particles can occur. Aerosols formed in this manner can impact air quality, particularly in urban areas where the amount of food preparation is high. Reported here are the results of laboratory experiments designed to optically and chemically characterize aerosols derived from cooking several types of meats including ground beef, salmon, chicken, and pork both in an inert atmosphere and in synthetic air. The laboratory-generated aerosols are studied using a laminar flow cell that is configured to accommodate simultaneous optical characterization in the mid-infrared and collection of particles for subsequent chemical analysis by gas chromatography. Preliminary optical results in the visible and ultra-violet will also be presented.

Medium-Throughput Screen of Microbially Produced Serotonin via a G-Protein-Coupled Receptor-Based Sensor.

Science.gov (United States)

Ehrenworth, Amy M; Claiborne, Tauris; Peralta-Yahya, Pamela

2017-10-17

Chemical biosensors, for which chemical detection triggers a fluorescent signal, have the potential to accelerate the screening of noncolorimetric chemicals produced by microbes, enabling the high-throughput engineering of enzymes and metabolic pathways. Here, we engineer a G-protein-coupled receptor (GPCR)-based sensor to detect serotonin produced by a producer microbe in the producer microbe's supernatant. Detecting a chemical in the producer microbe's supernatant is nontrivial because of the number of other metabolites and proteins present that could interfere with sensor performance. We validate the two-cell screening system for medium-throughput applications, opening the door to the rapid engineering of microbes for the increased production of serotonin. We focus on serotonin detection as serotonin levels limit the microbial production of hydroxystrictosidine, a modified alkaloid that could accelerate the semisynthesis of camptothecin-derived anticancer pharmaceuticals. This work shows the ease of generating GPCR-based chemical sensors and their ability to detect specific chemicals in complex aqueous solutions, such as microbial spent medium. In addition, this work sets the stage for the rapid engineering of serotonin-producing microbes.

Hydrolysis technology for producing sugars from biomass as raw material for the chemical industry - SugarTech

Energy Technology Data Exchange (ETDEWEB)

Siika-aho, M.; Kallioinen, A.; Pakula, T. (and others) (VTT Technical Research Centre of Finland, Espoo (Finland)), email: matti.siika-aho@vtt.fi

2009-10-15

In SugarTech project, spruce, forest residue, birch and sugar cane bagasse have been studied as a raw material for production of sugars to be processed further to ethanol and other chemicals. These raw materials containing high proportion of carbohydrates have been analysed and pretreated for enzyme hydrolysis by steam explosion and oxidative methods. The pretreated materials have been studied in respect to yield and enzymatic hydrolysability. Birch and bagasse could easily be pretreated with steam explosion. Catalytic oxidation treatment of spruce produced material with superior hydrolysability to steam exploded material. Enzyme adsorption and desorption were studied aiming at recycling of enzymes in the hydrolysis process. Purified cellulase enzymes were found to have high tendency to adsorption on lignocellulosic substrate. Adsorption could be decreased by additives, e.g. urea and BSA. In addition, the hydrolytic system of Trichoderma reesei in the presence of different substrates has been studied. (orig.)

Solvent-tolerant bioconversion : Construction and analysis of a phenol producing Pseudomonas putida S12

NARCIS (Netherlands)

Wierckx, N.J.P.

2009-01-01

Organic chemicals play a fundamental role in modern civilization. Today, almost all of these chemicals are produced from oil. This leads to pollution and creates a dependency on often politically unstable oil producing countries. It is possible to make the same chemicals from sugar, using

Nuclear activated cw chemical laser

International Nuclear Information System (INIS)

Roberts, T.G.

1982-01-01

A cw chemical laser which uses processed radioactive waste to produce active atoms from a chemically inactive gas before being mixed with another molecule such as hydrogen or deuterium is disclosed. This laser uses no toxic or corrosive fuels and does not require any electrical or other type of auxiliary power supply. The energy released by the radioactive material is used to produce the active atoms such as fluorine. This is accomplished by using the radiation products from processed radioactive waste to dissociate the inert gas in the plenum of the laser. The radioactive material is held in the passageway walls of a device similar to a heat exchanger. The exchanger device may be located in the gas generator section of a chemical laser. The inactive gas is passed through the exchanger device and while passing through it the radiation from the radioactive material dissociates the gas, producing a concentration of free active atoms. This active atom generator then feeds the nozzle bank or mixing section of a laser to produce a lasing action

Chemical and biological studies on producing high quality biscuits with irradiated tomato wastes

International Nuclear Information System (INIS)

Nassef, A.E.

2005-01-01

The present investigation has been carried out to produce high quality biscuits for treatment of some special diseases. In this study, the total tomato processing wastes were used as new source of protein in which the most predominate elements were found to be phosphorus, potassium and magnesium. Phenyl alanine was found to be the first limiting amino acid, while lysine was the second limiting amino acid. It was found to contain about 30.66% fiber and 28.1% protein. The total tomato processing wastes remain unutilized and they not only add to the disposal problem, but also aggravate environmental pollution. Tomato wastes were irradiated in two doses (1.5 and 2.5 KGy) for preservation. Biscuits were made with supplementation of 5, 10 and 15% tomato wastes. All samples of biscuits were examined for chemical composition and organoleptic evaluation. Biological assay was carried out on rats fed biscuits containing 15% irradiated and non-irradiated tomato wastes. The weight gain, serum cholesterol and triglycerides were determined. Internal organs were also followed. The results obtained showed that 15% tomato wastes biscuit had the highest content of lysine, isoleucine and fiber (6.36, 2.72 and 24.80, respectively) and also scored a good grade. Weight gain, cholesterol and triglycerides were reduced comparable to control and there was no effect of irradiation on the rats internal organs

Apparatus for chemical synthesis

Science.gov (United States)

Kong, Peter C [Idaho Falls, ID; Herring, J Stephen [Idaho Falls, ID; Grandy, Jon D [Idaho Falls, ID

2011-05-10

A method and apparatus for forming a chemical hydride is described and which includes a pseudo-plasma-electrolysis reactor which is operable to receive a solution capable of forming a chemical hydride and which further includes a cathode and a movable anode, and wherein the anode is moved into and out of fluidic, ohmic electrical contact with the solution capable of forming a chemical hydride and which further, when energized produces an oxygen plasma which facilitates the formation of a chemical hydride in the solution.

Comparative study of microbiological, chemical and sensory properties of kefirs produced in Estonia, Latvia and Lithuania.

Science.gov (United States)

Anton, Dea; Raudsepp, Piret; Roasto, Mati; Meremäe, Kadrin; Kuusik, Sirje; Toomik, Peeter; Elias, Priit; Laikoja, Katrin; Kaart, Tanel; Lepiku, Martin; Püssa, Tõnu

2016-02-01

In the current study the microbiological, sensory and chemical properties of 24 kefirs (12 producers) from Estonian, Latvian and Lithuanian retail market were determined using gas chromatography (GC), high performance liquid chromatography (HPLC-MS/MS-Q-TOF and LC-ion trap MS/MS), spectrophotometry and other methods. Antihypertensive, angiotensin-converting enzyme (ACE) inhibiting, antioxidant and antibacterial peptides were found in the kefir samples. According to the results of principal component analysis of 200 most abundant compounds obtained with HPLC-MS/MS-Q-TOF analysis, Estonian kefirs differed from the rest. Kefirs of Latvian and Lithuanian origin showed similarities in several characteristics, probably related to the starter cultures and technological processes. The fatty acids composition of all Baltic kefirs was uniform. The antioxidant capacity of the kefirs varied slightly, whereas intermediate positive correlation (r = 0.32, P kefirs. Only one third of analysed kefirs met the requirements of the minimum sum of viable microorganisms, indicated in the Codex Standard for Fermented Milks.

Leaching properties and chemical compositions of calcines produced at the Idaho Chemical Processing Plant

International Nuclear Information System (INIS)

Staples, B.A.; Paige, B.E.; Rhodes, D.W.; Wilding, M.W.

1980-01-01

No significant chemical differences were determined between retrieved and fresh calcine based on chemical and spectrochemical analyses. Little can be derived from the amounts of the radioisotopes present in the retrieved calcine samples other than the ratios of strontium-90 to cesium-137 are typical of aged fission product. The variations in concentrations of radionuclides within the composite samples of each bin also reflect the differences in compositions of waste solutions calcined. In general the leaching characteristics of both calcines by distilled water are similar. In both materials the radionuclides of cesium and strontium were selectively leached at significant rates, although cesium leached much more completely from the alumina calcine than from the zirconia calcine. Cesium and strontium are probably contained in both calcines as nitrate salts and also as fluoride salts in zirconia calcine, all of which are at least slightly soluble in water. Radionuclides of cerium, ruthenium, and plutonium in both calcines were highly resistant to leaching and leached at rates similar to or less than those of the matrix elements. These elements exist as polyvalent metal ions in the waste solutions before calcination and they probably form insoluble oxides and fluorides in the calcine. The relatively slow leaching of nitrate ion from zirconia calcine and radiocesium from both calcines suggests that the calcine matrix in some manner prevents complete or immediate contact of the soluble ions with water. Whether radiostrontium forms slightly fluoride salts or forms nitrate salts which are protected in the same manner as radiocesium is unknown. Nevertheless, selective leaching of cesium and strontim is retarded in some manner by the calcine matrix

Tekna's produced water conference 2005

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

The conference has 22 presentations discussing topics on discharge reduction, produced water quality, produced water re-injection, chemicals particularly environmentally friendly ones, separation technology, reservoir souring, total water management systems, pollution, oil in water problems and platform operation. Various field tests and experiences particularly from the offshore petroleum sector are presented (tk)

Characterizations of arsenic-doped zinc oxide films produced by atmospheric metal-organic chemical vapor deposition

Energy Technology Data Exchange (ETDEWEB)

Weng, Li-Wei, E-mail: onlyway54@hotmail.com [Department of Electronic Engineering, College of Electrical Engineering and Computer Science, Chung Yuan Christian University, Chung-Li 32023, Taiwan (China); Uen, Wu-Yih, E-mail: uenwuyih@ms37.hinet.net [Department of Electronic Engineering, College of Electrical Engineering and Computer Science, Chung Yuan Christian University, Chung-Li 32023, Taiwan (China); Lan, Shan-Ming; Liao, Sen-Mao [Department of Electronic Engineering, College of Electrical Engineering and Computer Science, Chung Yuan Christian University, Chung-Li 32023, Taiwan (China); Yang, Tsun-Neng; Wu, Chih-Hung; Hong, Hwe-Fen; Ma, Wei-Yang [Institute of Nuclear Energy Research, P.O. Box 3-11, Lungtan 32500, Taiwan (China); Shen, Chin-Chang [Chemical Engineering Division, Institute of Nuclear Energy Research, Longtan Township, Taoyuan 32546, Taiwan (China)

2013-07-15

p-type ZnO films were prepared by atmospheric metal-organic chemical vapor deposition technique using arsine (AsH{sub 3}) as the doping source. The electrical and optical properties of arsenic-doped ZnO (ZnO:As) films fabricated at 450–600 °C with various AsH{sub 3} flow rates ranging from 8 to 21.34 μmol/min were analyzed and compared. Hall measurements indicate that stable p-type ZnO films with hole concentrations varying from 7.2 × 10{sup 15} to 5.8 × 10{sup 18} cm{sup −3} could be obtained. Besides, low temperature (17 K) photoluminescence spectra of all ZnO:As films also demonstrate the dominance of the line related to the neutral acceptor-bound exciton. Moreover, the elemental identity and chemical bonding information for ZnO:As films were examined by X-ray photoelectron spectroscopy. Based on the results obtained, the effects of doping conditions on the mechanism responsible for the p-type conduction were studied. Conclusively, a simple technique to fabricate good-quality p-type ZnO films has been recognized in this work. Depositing the film at 550 °C with an AsH{sub 3} flow rate of 13.72 μmol/min is appropriate for producing hole concentrations on the order of 10{sup 17} cm{sup −3} for it. Ultimately, by increasing the AsH{sub 3} flow rate to 21.34 μmol/min for doping and depositing the film at 600 °C, ZnO:As films with a hole concentration over 5 × 10{sup 18} cm{sup −3} together with a mobility of 1.93 cm{sup 2}V{sup −1} s{sup −1} and a resistivity of 0.494 ohm-cm can be achieved.

Chemical warfare agents

Directory of Open Access Journals (Sweden)

Vijayaraghavan R

2010-01-01

Full Text Available Among the Weapons of Mass Destruction, chemical warfare (CW is probably one of the most brutal created by mankind in comparison with biological and nuclear warfare. Chemical weapons are inexpensive and are relatively easy to produce, even by small terrorist groups, to create mass casualties with small quantities. The characteristics of various CW agents, general information relevant to current physical as well as medical protection methods, detection equipment available and decontamination techniques are discussed in this review article. A brief note on Chemical Weapons Convention is also provided.

Chemical warfare agents

Science.gov (United States)

Ganesan, K.; Raza, S. K.; Vijayaraghavan, R.

2010-01-01

Among the Weapons of Mass Destruction, chemical warfare (CW) is probably one of the most brutal created by mankind in comparison with biological and nuclear warfare. Chemical weapons are inexpensive and are relatively easy to produce, even by small terrorist groups, to create mass casualties with small quantities. The characteristics of various CW agents, general information relevant to current physical as well as medical protection methods, detection equipment available and decontamination techniques are discussed in this review article. A brief note on Chemical Weapons Convention is also provided. PMID:21829312

Chemical Inhibition of Autophagy

DEFF Research Database (Denmark)

Baek, Eric; Lin Kim, Che; Gyeom Kim, Mi

2016-01-01

Chinese hamster ovary (CHO) cells activate and undergo apoptosis and autophagy for various environmental stresses. Unlike apoptosis, studies on increasing the production of therapeutic proteins in CHO cells by targeting the autophagy pathway are limited. In order to identify the effects of chemical...... autophagy inhibitors on the specific productivity (qp), nine chemical inhibitors that had been reported to target three different phases of autophagy (metformin, dorsomorphin, resveratrol, and SP600125 against initiation and nucleation; 3-MA, wortmannin, and LY294002 against elongation, and chloroquine...... and bafilomycin A1 against autophagosome fusion) were used to treat three recombinant CHO (rCHO) cell lines: the Fc-fusion protein-producing DG44 (DG44-Fc) and DUKX-B11 (DUKX-Fc) and antibody-producing DG44 (DG44-Ab) cell lines. Among the nine chemical inhibitors tested, 3-MA, dorsomorphin, and SP600125...

Chemical characterization of some soils from four counties that produce Flue-cured tobacco

Directory of Open Access Journals (Sweden)

Marcela Rodríguez

2012-09-01

Full Text Available The municipalities or counties of Campoalegre and Garzón (State of Huila and Capitanejo and Enciso (State of Santander show different chemical soil characteristics when their origin is taken into account, based on their edaphogenetic environments. For the characterization of the soils from these counties, samples from 65 farms were arranged, based on the database of farmers associated with the Protabaco Company. With the soil samples taken, chemical and texture analyses were performed, codifying the results in order to analyze them, keeping in mind the ideal parameters for the tobacco crop. In the counties of Huila, the texture, pH and organic matter were found to have ideal levels, in contrast to the phosphorus, potassium, magnesium, sulfur and chloride levels which were unsuitable, but the calcium content showed levels between suitable and good. In Santander, the pH, organic matter, phosphorus, calcium, sulfur and chloride were at unsuitable levels, in contrast, the contrary occurred with the texture and potassium which were at normal levels. It is recommended, due to the difference among the chemical parameters, that a fertilization program be handled differently for the zones of Santander and Huila, bearing in mind that the chemical parameters were found to be more limited in Santander than in Huila

Monitoring presence of chemical agents

International Nuclear Information System (INIS)

Preston, J.M.

1984-01-01

The specification describes a case for use with a hand-portable chemical agent detector for continuously monitoring an atmosphere for the presence of predetermined chemical agents. The detector having means for ionizing air samples and providing at an output terminal electrical signals representative of the mobility spectrum of ionized chemical vapours produced by the ionizing means. The case comprises means for defining a chamber in the case for supporting and removably enclosing the detector, means for communicating ambient atmosphere to the chamber, electrical circuit means in the case, the circuit means being adapted to be detachably connected to the detector output terminal when the detector is positioned in the chamber and being responsive to the electrical signals for producing an alarm signal when the signals detect a chemical agent concentration in the atmosphere exceeding a predetermined concentration level, and alarm means responsive to the alarm signal. (author)

Precipitation of metals in produced water : influence on contaminant transport and toxicity

International Nuclear Information System (INIS)

Azetsu-Scott, K.; Wohlgeschaffen, G.; Yeats, P.; Dalziel, J.; Niven, S.; Lee, K.

2006-01-01

Produced water contains a number of compounds of environmental concern and is the largest volume waste stream from oil and gas production activities. Recent studies have shown that chemicals dissolved in waste water from oil platforms stunted the growth of North Sea cod and affected their breeding patterns. Scientific research is needed to identify the impact of produced water discharges on the environment as well as to identify acceptable disposal limits for produced water. This presentation provided details of a study to characterize produced water discharged within the Atlantic regions of Canada. The study included dose response biological effect studies; research on processes controlling the transport and transformation of contaminants associated with produced water discharges and the development of risk assessment models. The sample location for the study was a site near Sable Island off the coast of Nova Scotia. Chemical analysis of the produced water was conducted as well as toxicity tests. Other tests included a time-series particulate matter sedimentation test; time-series metal and toxicity analysis; time-series change in metal precipitates tests and a produced water/seawater layering experiment. Dissolved and particulate fractions were presented, and the relationship between toxicity and particulate concentrations was examined. Results of the study suggested that produced water contaminants are variable over spatial and temporal scales due to source variations and changes in discharge rates. Chemical changes occur within 24 hours of produced water being mixed with seawater and facilitate contaminant partitioning between the surface micro layer, water column and sediments. Changes in the toxicity of the produced water are correlated with the partitioning of chemical components. The impact zone may be influenced by chemical kinetics that control the distribution of potential toxic metals. Further research is needed to investigate the effects of low level

Fuel and Chemicals from Renewable Alcohols

DEFF Research Database (Denmark)

Hansen, Jeppe Rass

2008-01-01

The present work entitled Fuel and Chemicals from Renewable Alcohols covers the idea of developing routes for producing sustainable fuel and chemicals from biomass resources. Some renewable alcohols are already readily available from biomass in significant amounts and thus the potential...... for these renewable alcohols, together with other primary renewable building blocks, has been highlighted in the introductory chapter. While the first chapter covers the general potential of a renewable chemical industry, the other chapters deal with particular possibilities. It is shown how ethanol and glycerol can...... be converted into hydrogen by steam reforming over nickel or ruthenium based catalysts. This process could be important in a future hydrogen society, where hydrogen can be utilized in high efficiency fuel cells. Hydrogen produced from biofeedstocks can also be used directly in the chemical industry, where...

Role of the Chemical Weapons Convention (CWC) in Combating Chemical Terrorism

International Nuclear Information System (INIS)

Matousek, J.

2007-01-01

Main reason for concluding the CWC was preventing use of CWs in hostilities by state actors. Chemical terrorism is a broader phenomenon involving not only misuse of CWs but also of non-weaponised toxic compounds and intended strikes on industrial and social infrastructures with release of toxic, liquefied and inflammable chemicals. Nevertheless, the CWC is an important instrument in combating the most dangerous forms of international chemical terrorism. The effort of OPCW and mainly of SPs national authorities ensure that chemicals produced for peaceful purposes are not misused, provide some guarantees that terrorists will not be able to acquire or make their own CWs. That is why universality of the CWC and respective national implementation measures including comprehensive legislation are of utmost importance. The enforcement by all countries of the CWCs requirement to make the development, production, stockpiling, transfers and use of CWs illegal for anyone means that terrorist could be put on trial for violating the CWC. The OPCWs expertise and knowledge of CWs, verification regime and the system of assistance and protection under the CWC as a reflection of international co-operation are being put to use to prevent and respond to chemical terrorist strikes and thus considerably diminish their potential consequences. It can be added that pursuant to the UN SC Resolution 1540, all nations are obliged to take actions ensuring that non-State actors cannot develop, produce, use or trade CWs in the terms of the CWC. Current status of implementing the CWC is analysed with special emphasis on prevention of and response to terrorist chemical attacks.(author)

Public control of environmental health hazards (clinical and experimental studies of distal axonopathy--a frequent form of brain and nerve damage produced by environmental chemical hazards)

Energy Technology Data Exchange (ETDEWEB)

Schaumburg, H.H.; Spencer, P.S.

1979-01-01

Clinical and pathological studies of the peripheral and central nervous system degeneration (distal dying-back axonopathy) in humans and experimental animals produced by acrylamide monomer and certain hydrocarbon compounds are summarized. The human distal axonopathies include: many of the naturally occurring, genetically determined system disorders/ certain nutritional disorders/ uremic neuropathy/ the neuropathies associated with some malignancies/ and the toxic neuropathies induced by industrial chemicals. The irreversible, subclinical, and clinical effects of distal axonopathies on the human central nervous system are examined. A morphological rationale for previously enigmatic clinical phenomena in the human toxic neuropathies is presented. Neuropathology is potentially useful in the screening of chemicals for neurotoxicity. (7 photos, 24 references)

Sensory and chemical characteristics of sausages produced of cyprinid meat

OpenAIRE

Okanović, Đorđe G.; Ćirković, Miroslav A.; Novakov, Nikolina J.; Ljubojević, Dragana B.; Karan, Dragica D.; Matekalo-Sverak, Vesna F.; Mašić, Zoran S.

2013-01-01

Fish meat and fish products are valuable source of nutrients of great importance for diverse and healthy nutrition. The optimal ratio of protein, fat, carbohydrates, minerals and vitamins contribute to high nutritive value offish meat. Recommendations that fish should be regularly used in the diet are based on the fact that fish meat is the most important nutritional source of n-3 highly unsaturated fatty acids (n-3 HUFA). The aim of this study was to investigate sensory and chemical properti...

Hydrolysis technology for producing sugars from biomass as raw material for the chemical industry - SugarTech

Energy Technology Data Exchange (ETDEWEB)

Kallioinen, A.; Haekkinen, M.; Pakula, T. (and others) (VTT Technical Research Centre of Finland, Espoo (Finland)), Email: anne.kallioinen@vtt.fi

2010-10-15

In SugarTech project, spruce, forest residue, birch and sugar cane bagasse have been studied as a raw material for production of sugars to be processed further to ethanol and other chemicals. These raw materials containing high proportion of carbohydrates have been analysed and pretreated for enzyme hydrolysis by steam explosion and oxidative methods. The pretreated materials have been studied in respect to yield and enzymatic hydrolysability. Birch and bagasse could easily be pretreated with steam explosion. Catalytic and alkaline oxidation treatment of spruce produced material with superior hydrolysability to steam exploded material. Enzyme adsorption and desorption were studied with lignocellulosic substrates aiming at recycling of enzymes in the hydrolysis process. After enzymatic hydrolysis, a major part of the enzymes remained bound to substrate in spite of high degree of hydrolysis. Desorption of enzymes could be detected only with catalytically oxidised spruce. In addition, the hydrolytic system of Trichoderma reesei, which is a widely used fungus for cellulase enzyme production, has been studied in the presence of different substrates. The substrate and the pretreatment method had clear effects on gene expression profile. (orig.)

Estimation of risks by chemicals produced during laser pyrolysis of tissues

Science.gov (United States)

Weber, Lothar W.; Spleiss, Martin

1995-01-01

Use of laser systems in minimal invasive surgery results in formation of laser aerosol with volatile organic compounds of possible health risk. By use of currently identified chemical substances an overview on possibly associated risks to human health is given. The class of the different identified alkylnitriles seem to be a laser specific toxicological problem. Other groups of chemicals belong to the Maillard reaction type, the fatty acid pyrolysis type, or even the thermally activated chemolysis. In relation to the available different threshold limit values the possible exposure ranges of identified substances are discussed. A rough estimation results in an exposure range of less than 1/100 for almost all substances with given human threshold limit values without regard of possible interactions. For most identified alkylnitriles, alkenes, and heterocycles no threshold limit values are given for lack of, until now, practical purposes. Pyrolysis of anaesthetized organs with isoflurane gave no hints for additional pyrolysis products by fragment interactions with resulting VOCs. Measurements of pyrolysis gases resulted in detection of small amounts of NO additionally with NO2 formation at plasma status.

Raman enhancement on ultra-clean graphene quantum dots produced by quasi-equilibrium plasma-enhanced chemical vapor deposition.

Science.gov (United States)

Liu, Donghua; Chen, Xiaosong; Hu, Yibin; Sun, Tai; Song, Zhibo; Zheng, Yujie; Cao, Yongbin; Cai, Zhi; Cao, Min; Peng, Lan; Huang, Yuli; Du, Lei; Yang, Wuli; Chen, Gang; Wei, Dapeng; Wee, Andrew Thye Shen; Wei, Dacheng

2018-01-15

Graphene is regarded as a potential surface-enhanced Raman spectroscopy (SERS) substrate. However, the application of graphene quantum dots (GQDs) has had limited success due to material quality. Here, we develop a quasi-equilibrium plasma-enhanced chemical vapor deposition method to produce high-quality ultra-clean GQDs with sizes down to 2 nm directly on SiO 2 /Si, which are used as SERS substrates. The enhancement factor, which depends on the GQD size, is higher than conventional graphene sheets with sensitivity down to 1 × 10 -9  mol L -1 rhodamine. This is attributed to the high-quality GQDs with atomically clean surfaces and large number of edges, as well as the enhanced charge transfer between molecules and GQDs with appropriate diameters due to the existence of Van Hove singularities in the electronic density of states. This work demonstrates a sensitive SERS substrate, and is valuable for applications of GQDs in graphene-based photonics and optoelectronics.

Producer gas and its use for the manufacture of lime

Energy Technology Data Exchange (ETDEWEB)

Gupta, A K; Kumar, S

1976-04-01

An analysis of available data indicates that coal-based producer gas is superior to coal or wood as a fuel for lime kilns and much more readily available than oil or natural gas. With producer gas, chemical-grade lime is obtained, and the kiln capacity is increased, so that a smaller unit can be used or more lime obtained. With a mixture of coal and wood as the fuel, the lime produced is contaminated with ash. The added cost of the gas-producer unit can be paid out in one year owing to the greater demand for and the consequent higher prices obtainable for the chemical-grade product. In addition, the flue gases from the kiln can be used in place of steam to heat the gas producer, but experimental studies are needed to determine the magnitude of the savings in fuel consumption. 15 references.

Production of chemical substances in Tajikistan

International Nuclear Information System (INIS)

Boboev, Kh.E.; Nazarov, K.M.

2010-01-01

Full text: Government of the Republic of Tajikistan has signed Convention "On prohibition of chemical weapon application"and no chemical weapon (CHW) is produced on the territory of republic. However, the potential production of CHW by individual persons or groups can be organized, using available production and obtaining chemical substances from other countries. Chemical substances, which have strong damage effect, easily, can be synthesized in chemical laboratories. These are general toxic substances, as hydrocyanic acid acid, phosgene, mustard gas, lewisite, sarin and others. The similar chemical substances of industrial significance are produced in Tajikistan: ammonia, chlorine, explosives, caustic soda, carbamide, formaldehyde and others. For industrial needs and agriculture from other countries Tajikistan is receiving the following: sodium cyanide and potassium for gold-mining; mineral acids; pesticides and others. Besides, there are different deposits in Tajikistan, reprocessing of which gives an opportunity to obtain different chemical substances. What can be obtained from chemicals produced in Tajikistan? Chlorine - from this reagent the fluoride chlorine, phosgene COCl_2 and many other compounds are easily synthesized, which are CHW components. Obtained cyanic compounds for gold mining can be used as precursor for neuroparalytic action. A big amount of metallic aluminum is produced in the republic. The Al powder for rocket fuel can be obtained from it. Obtained from other countries pesticides are potential components for CHW creation. A strong control and account of pesticides use is necessary. It is extremely important to control materials, equipment and technologies which allow countries and separate groups to create weapons of mass destruction (WMD). The most important factor is goods identification. Firstly - inspection of external view, labeling, packing specifications, license availability and etc. Strong control of checklists is necessary according

Chemical and ecotoxicological evaluation of biochar produced from residues of biogas production.

Science.gov (United States)

Stefaniuk, Magdalena; Oleszczuk, Patryk; Bartmiński, Piotr

2016-11-15

Analyses were carried out for biochars produced at three temperatures of pyrolysis (400, 600 and 800°C) from solid residue from biogas production (RBP). Separated and non-separated RBP from biogas plants employing different biogas production conditions were pyrolyzed. The contents of heavy metals and polycyclic aromatic hydrocarbons (PAHs) (16 PAH US EPA) were analyzed in biochars. The analyses showed that with an increased pyrolysis temperature, there was an increase in the contents of PAHs and of certain heavy metals (Cr, Cu, Cd, Pb and Mn). In the ecotoxicological tests, it was noted that the effect depended on the temperature of pyrolysis and on the feedstock from which the biochar was produced. The least harmful effect on the test organisms was from biochar produced by separated RBP in a biogas plant operating in mesophilic conditions. The most negative effect on the test organisms was characteristic of biochar produced from non-separated mesophilic RBP. This study shows that the main factors determining the level of toxicity of biochars produced from RBP towards various living organisms are both the method of feedstock production and the temperature at which the process of pyrolysis is conducted. Copyright © 2016 Elsevier B.V. All rights reserved.

Physico-chemical properties and sensory evaluation of jam made ...

African Journals Online (AJOL)

This study was carried out to investigate the possibility of producing jam from black-plum and to evaluate the physico-chemical properties, nutritional properties and consumer acceptability of the product. Black-plum jam was produced using traditional openkettle method. The physico-chemical analyses of black-plum fruit ...

Agricultural Chemical Use in Tomato Farming in Kazova Region of Tokat Province

Directory of Open Access Journals (Sweden)

Bilge Gözener

2017-05-01

Full Text Available Pesticide uses in Kazova region of Tokat province were assessed in this study. Data were gathered through Simple Random Sampling method with questionnaires made with 72 agricultural enterprises. Resultant data were assessed through arithmetic means and percentiles. A factor analysis was also performed on producer opinions about pesticide use in tomato. Average enterprise size was 20.27 da and tomato is cultivated over 56.98% of these lands. Of the participant producers, 97.22% were not member of any associations or cooperatives. About 91.67% of the participant producers prefer chemical treatments. Producer usually use chemicals based on their previous experiences and recommendations of chemical-fertilizer dealers. Price is the dominant factor while selecting the chemicals to be sued. The dose prescribed by the dealer is generally used. Of the participant producers, 91.67% indicated that they didn’t know about the time to be passed between the last chemical treatment and the harvest; 44.44% don’t think that pesticides they use leaved residues over the products and 95.83% indicated that chemical treatments didn’t create environmental pollution. With the factor analysis, KMO value was calculated as 0.553 and 14 variables thought to be effective on producer opinions about agricultural chemical uses were gathered under 6 factors (toxicity, attention in treatments, human health, conscious production and consumption, environmental harm, hygiene.

Chemical Industry Waste water Treatment

International Nuclear Information System (INIS)

Nasr, F.A.; Doma, H.S.; El-Shafai, S.A.; Abdel-HaJim, H.S.

2004-01-01

Treatment of chemical industrial wastewater from building and construction chemicals factory and plastic shoes manufacturing factory was investigated. The two factories discharge their wastewater into the public sewerage network. The results showed the wastewater discharged from the building and construction chemicals factory was highly contaminated with organic compounds. The average values of COD and BOD were 2912 and 150 mg O 2 /l. Phenol concentration up to 0.3 mg/l was detected. Chemical treatment using lime aided with ferric chloride proved to be effective and produced an effluent characteristics in compliance with Egyptian permissible limits. With respect to the other factory, industrial wastewater was mixed with domestic wastewater in order to lower the organic load. The COD, BOD values after mixing reached 5239 and 2615 mg O 2 /l. The average concentration of phenol was 0.5 mg/l. Biological treatment using activated sludge or rotating biological contactor (RBe) proved to be an effective treatment system in terms of producing an effluent characteristic within the permissible limits set by the law

Effect of experimental factors on magnetic properties of nickel nanoparticles produced by chemical reduction method using a statistical design

International Nuclear Information System (INIS)

Vaezi, M.R.; Barzgar Vishlaghi, M.; Farzalipour Tabriz, M.; Mohammad Moradi, O.

2015-01-01

Highlights: • Superparamagnetic nickel nanoparticles are synthesized by wet chemical reduction. • Effects of synthesis parameters on magnetic properties are studied. • Central composite experimental design is used for building an empirical model. • Solvents ratio was more influential than reactants mixing rate. - Abstract: Nickel nanoparticles were synthesized by chemical reduction method in the absence of any surface capping agent. The effect of reactants mixing rate and the volume ratio of methanol/ethanol as solvent on the morphology and magnetic properties of nickel nanoparticles were studied by design of experiment using central composite design. X-ray diffraction (XRD) technique and Transmission Electron Microscopy (TEM) were utilized to characterize the synthesized nanoparticles. Size distribution of particles was studied by Dynamic Light Scattering (DLS) technique and magnetic properties of produced nanoparticles were investigated by Vibrating Sample Magnetometer (VSM) apparatus. The results showed that the magnetic properties of nickel nanoparticles were more influenced by volume ratio of methanol/ethanol than the reactants mixing rate. Super-paramagnetic nickel nanoparticles with size range between 20 and 50 nm were achieved when solvent was pure methanol and the reactants mixing rate was kept at 70 ml/h. But addition of more ethanol to precursor solvent leads to the formation of larger particles with broader size distribution and weak ferromagnetic or super-paramagnetic behavior

Boken som medium

OpenAIRE

Pelle, Snickars

2012-01-01

I slutet av september 2011 presenterade Amazon ett ny slags surfplatta, Kindle Fire. Till skillnad från företagets tidigare läsplattor, som (nästan) enbart handlat om läsning på skärm, var detta en Kindle som behärskade hela det samtidsmediala spektrat. Under ledning av Amazons VD Jeff Bezos var själva lanseringen av Kindle Fire visserligen en ganska platt historia. Bezos är ingen estradör och en föga karismatisk företagsledare med än mindre publikreaktioner gör inte någon succé – eller som e...

Sequential chemical treatment of radium species in TENORM waste sludge produced from oil and natural gas production

International Nuclear Information System (INIS)

El Afifi, E.M.; Awwad, N.S.; Hilal, M.A.

2009-01-01

This paper is dedicated to the treatment of sludge occurring in frame of the Egyptian produced from oil and gas production. The activity levels of three radium isotopes: Ra-226 (of U-series), Ra-228 and Ra-224 (of Th-series) in the solid TENORM waste (sludge) were first evaluated and followed by a sequential treatment for all radium species (fractions) presented in TENORM. The sequential treatment was carried out based on two approaches 'A' and 'B' using different chemical solutions. The results obtained indicate that the activity levels of all radium isotopes (Ra-226, Ra-228 and Ra-224) of the environmental interest in the TENORM waste sludge were elevated with regard to exemption levels established by IAEA [International Atomic Energy Agency (IAEA), International basic safety standards for the protection against ionizing radiation and for the safety of radiation sources. GOV/2715/Vienna, 1994]. Each approach of the sequential treatment was performed through four steps using different chemical solutions to reduce the activity concentration of radium in a large extent. Most of the leached radium was found as an oxidizable Ra species. The actual removal % leached using approach B was relatively efficient compared to A. It is observed that the actual removal percentages (%) of Ra-226, Ra-228 and Ra-224 using approach A are 78 ± 2.8, 64.8 ± 4.1 and 76.4 ± 5.2%, respectively. Whereas in approach A, the overall removal % of Ra-226, Ra-228 and Ra-228 was increased to ∼91 ± 3.5, 87 ± 4.1 and 90 ± 6.2%, respectively

Occurrence, production, and export of lipophilic compounds by hydrocarbonoclastic marine bacteria and their potential use to produce bulk chemicals from hydrocarbons.

Science.gov (United States)

Manilla-Pérez, Efraín; Lange, Alvin Brian; Hetzler, Stephan; Steinbüchel, Alexander

2010-05-01

Petroleum (or crude oil) is a complex mixture of hydrocarbons. Annually, millions of tons of crude petroleum oil enter the marine environment from either natural or anthropogenic sources. Hydrocarbon-degrading bacteria (HDB) are able to assimilate and metabolize hydrocarbons present in petroleum. Crude oil pollution constitutes a temporary condition of carbon excess coupled to a limited availability of nitrogen that prompts marine oil-degrading bacteria to accumulate storage compounds. Storage lipid compounds such as polyhydroxyalkanoates (PHAs), triacylglycerols (TAGs), or wax esters (WEs) constitute the main accumulated lipophilic substances by bacteria under such unbalanced growth conditions. The importance of these compounds as end-products or precursors to produce interesting biotechnologically relevant chemicals has already been recognized. In this review, we analyze the occurrence and accumulation of lipid storage in marine hydrocarbonoclastic bacteria. We further discuss briefly the production and export of lipophilic compounds by bacteria belonging to the Alcanivorax genus, which became a model strain of an unusual group of obligate hydrocarbonoclastic bacteria (OHCB) and discuss the possibility to produce neutral lipids using A. borkumensis SK2.

Wild blueberry polyphenol-protein food ingredients produced by three drying methods: Comparative physico-chemical properties, phytochemical content, and stability during storage.

Science.gov (United States)

Correia, Roberta; Grace, Mary H; Esposito, Debora; Lila, Mary Ann

2017-11-15

Particulate colloidal aggregate food ingredients were prepared by complexing wheat flour, chickpea flour, coconut flour and soy protein isolate with aqueous wild blueberry pomace extracts, then spray drying, freeze drying, or vacuum oven drying to prepare dry, flour-like matrices. Physico-chemical attributes, phytochemical content and stability during storage were compared. Eighteen anthocyanins peaks were identified for samples. Spray dried matrices produced with soy protein isolate had the highest concentration of polyphenols (156.2mg GAE/g) and anthocyanins (13.4mg/g) and the most potent DPPH scavenging activity (714.1μmolesTE/g). Spray dried blueberry polyphenols complexed with protein were protected from degradation during 16weeks at 4°C and 20°C. Soy protein isolate more efficiently captured and stabilized wild blueberry pomace phytochemicals than other protein sources. Overall, spray drying the blueberry extracts complexed with protein proved to be an environment-friendly strategy to produce stable functional ingredients with multiple applications for the food industry. Copyright © 2017 Elsevier Ltd. All rights reserved.

Produced water volumes and management practices in the United States.

Energy Technology Data Exchange (ETDEWEB)

Clark, C. E.; Veil, J. A. (Environmental Science Division)

2009-09-01

Produced water volume generation and management in the United States are not well characterized at a national level. The U.S. Department of Energy (DOE) asked Argonne National Laboratory to compile data on produced water associated with oil and gas production to better understand the production volumes and management of this water. The purpose of this report is to improve understanding of produced water by providing detailed information on the volume of produced water generated in the United States and the ways in which produced water is disposed or reused. As the demand for fresh water resources increases, with no concomitant increase in surface or ground water supplies, alternate water sources, like produced water, may play an important role. Produced water is water from underground formations that is brought to the surface during oil or gas production. Because the water has been in contact with hydrocarbon-bearing formations, it contains some of the chemical characteristics of the formations and the hydrocarbons. It may include water from the reservoir, water previously injected into the formation, and any chemicals added during the production processes. The physical and chemical properties of produced water vary considerably depending on the geographic location of the field, the geologic formation, and the type of hydrocarbon product being produced. Produced water properties and volume also vary throughout the lifetime of a reservoir. Produced water is the largest volume by-product or waste stream associated with oil and gas exploration and production. Previous national produced water volume estimates are in the range of 15 to 20 billion barrels (bbl; 1 bbl = 42 U.S. gallons) generated each year in the United States (API 1988, 2000; Veil et al. 2004). However, the details on generation and management of produced water are not well understood on a national scale. Argonne National Laboratory developed detailed national-level information on the volume of produced

Virus-like particle of Macrobrachium rosenbergii nodavirus produced in Spodoptera frugiperda (Sf9) cells is distinctive from that produced in Escherichia coli.

Science.gov (United States)

Kueh, Chare Li; Yong, Chean Yeah; Masoomi Dezfooli, Seyedehsara; Bhassu, Subha; Tan, Soon Guan; Tan, Wen Siang

2017-03-01

Macrobrachium rosenbergii nodavirus (MrNV) is a virus native to giant freshwater prawn. Recombinant MrNV capsid protein has been produced in Escherichia coli, which self-assembled into virus-like particles (VLPs). However, this recombinant protein is unstable, degrading and forming heterogenous VLPs. In this study, MrNV capsid protein was produced in insect Spodoptera frugiperda (Sf9) cells through a baculovirus system. Dynamic light scattering (DLS) and transmission electron microscopy (TEM) revealed that the recombinant protein produced by the insect cells self-assembled into highly stable, homogenous VLPs each of approximately 40 nm in diameter. Enzyme-linked immunosorbent assay (ELISA) showed that the VLPs produced in Sf9 cells were highly antigenic and comparable to those produced in E. coli. In addition, the Sf9 produced VLPs were highly stable across a wide pH range (2-12). Interestingly, the Sf9 produced VLPs contained DNA of approximately 48 kilo base pairs and RNA molecules. This study is the first report on the production and characterization of MrNV VLPs produced in a eukaryotic system. The MrNV VLPs produced in Sf9 cells were about 10 nm bigger and had a uniform morphology compared with the VLPs produced in E. coli. The insect cell production system provides a good source of MrNV VLPs for structural and immunological studies as well as for host-pathogen interaction studies. © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 33:549-557, 2017. © 2016 American Institute of Chemical Engineers.

Chemical composition and antioxidant activity of geopropolis produced by Melipona fasciculata (Meliponinae) in flooded fields and cerrado areas of Maranhão State, northeastern Brazil

OpenAIRE

BATISTA,Marisa Cristina Aranha; ABREU,Bruno Vinicius de Barros; DUTRA,Richard Pereira; CUNHA,Mayara Soares; AMARAL,Flavia Maria Mendonça do; TORRES,Luce Maria Brandão; RIBEIRO,Maria Nilce de Sousa

2016-01-01

ABSTRACT Geopropolis, a mixture of plant resin, wax, soil and salivary secretion, is produced by the stingless bee Melipona fasciculata. This aim of this study was to investigate the chemical composition and antioxidant activity of geopropolis collected from beehives in two phytogeographical regions, flooded fields and cerrado, in the municipalities of Palmeirândia and Fernando Falcão, Maranhão State, northeastern Brazil. The geopropolis compounds were identified by gas chromatography-mass sp...

OPTIMIZATION OF PRODUCED WATER TREATMENT PROCESS - A CASE STUDY FOR DISPOSAL IN THE NIGER DELTA

Directory of Open Access Journals (Sweden)

BONIFACE A. ORIJI

2017-12-01

Full Text Available Produced water is the interstitial reservoir water that flows to the surface with the crude oil into the production separators. This study addressed the effects of some chemicals on produced water and the challenges of finding the optimal concentrations of these chemicals for treating produced water. In this study, produced water treatment was carried out in an oil production platform located in the Niger Delta so as to determine the effect of a particular scale inhibitor, biocide, demulsifier and water clarifier, also to obtain the optimum concentrations of these chemicals in the treatment of produced water. The physico-chemical properties and microbial content of the produced water were determined. The results showed that the conductivity, hardness, pH and alkalinity reduced with increasing concentration of the scale inhibitor. The total heterotrophic bacteria count (THBC, heterotrophic fungi count (THFC and the Sulphate reducing bacteria count (SRBC were found to reduce with increasing concentration of biocide and exposure time. The increase in biocide concentration from 64 PPM to 100 PPM resulted in the reduction of THBC by 99.78%, THFC by 81.32% and SRBC 99.85%. The water clarifier gave the optimum concentration for oil and grease in the produced water at 7.3 PPM.

Evaluation of physical and chemical characteristics of xanthan gums

Directory of Open Access Journals (Sweden)

Claire Tondo Vendruscolo

2007-03-01

Full Text Available This work aimed at evaluating the physical and chemical characteristics of the xanthan produced by Xanthomonas arboricola pv pruni strain 115, and at comparing it with two xanthans obtained from commercial sources – Kelzan e Roeper. The analyzed xanthans showed specified patterns mentioned in the literature, except for low pyruvic acid content in the xanthan produced by strain 115, low monovalent salt content in the Roeper sample and high divalent salt content in both commercial samples. The low pyruvic acid content in the xanthan produced by X. arboricola pv pruni 115 did not affect the aqueous solution viscosity. Thus, the xanthan produced by strain 115 show physical and chemical characteristics that allow its use by the petroleum industry, as well as, in food, pharmaceutical and cosmetics products. Xanthomonas arboricola pv pruni. Xanthan. Physical and chemical characteristics.

Chemical treatment of wastewaters produced during separation of iodine 131

International Nuclear Information System (INIS)

Cohen, P.; Marcaillou, J.; Amavis, R.

1959-01-01

The authors report the development and assessment of a chemical treatment of radioactive wastewaters by co-precipitation. This treatment is aimed at replacing a treatment based on the use of calcium phosphate which proved to be insufficient for wastewaters resulting from the production of iodine 131. After a presentation of the characteristics of the effluents to be processed, the authors report co-precipitation tests performed on effluents before release in the storage vessel (by using barium hydroxide, lead acetate or lead sulfate) and on effluents diluted on the storage vessel. They show that a co-precipitation method based on the use of lead sulfate in alkaline medium gives the best results

A Review on overboard CEOR discharged produced water treatment and remediation

Science.gov (United States)

Rawindran, H.; Krishnan, S.; Sinnathambi, C. M.

2017-06-01

Produced water is a waste by-product generated during oil and gas recovery operations. It contains the mixture of organic and inorganic compounds. Produced water management is a challenge faced by the petroleum practitioners worldwide. Build-up of chemical wastes from produced water causes huge footprint, which results in high CapEx and OpEx. Different technologies are practiced by various practitioners to treat the produced waste water. However, the constituents removed by each technology and the degree of organic compound removal has to be considered to identify the potential and effective treatment technologies for offshore industrial applications. Current produced water technologies and their successful applications have advantages and disadvantages and can be ranked on the basis of several factors, such as their discharge limit into water bodies, reinjection in producing well, or for any miscellaneous beneficial use. This paper attempts to provide a review of existing physical and chemical treatment technologies used for management of produced water. Based on our analysis, suitable methods will be recommended for offshore waste water treatment technologies.

Do bacteria, not fish, produce 'fish kairomone'?

NARCIS (Netherlands)

Ringelberg, J.; Van Gool, E.

1998-01-01

Fish-associated chemicals enhance phototactic downward swimming in Daphnia. If perch were treated with the antibiotic ampicillin, this enhancement was significantly decreased. Therefore, not fish, but bacteria associated with fish, seem to produce this kairomone. [KEYWORDS: Diel vertical migration;

Data on color and chemical composition of dried scallop (Mizuhopecten yessoensis produced in different areas of Hokkaido, Japan

Directory of Open Access Journals (Sweden)

Hisaki Enda

2018-02-01

Full Text Available Dried scallop is used in Chinese, Japanese, and French cuisines for its unique flavor and taste. The quality of dried scallop is rated according to its clear, shiny brown color, developed by the Maillard reaction between sugars and amino acids. This article reports the colors, represented by L* and a* values, and chemical composition (water, salinity, Brix, proteins, and amino acids of dried scallop products. The dried scallops were produced in Tokoro, Sarufutsu, and Saroma in Hokkaido, Japan. The color of the dried scallops had values of 45.7–52.0 for L* and 2.31–5.08 for a*. The salinity of the products was 15.1–17.7%. The amino acid contents were 1350.8–1668.6 mg/100 g. The data collected here are provided in table format. The data can serve as a reference for commercial dried scallop products to determine product quality. Keywords: Quality of products, Dried scallop, Seasoning ingredient, Browning

Isotope and chemical investigation of geothermal springs and thermal water produced by oil wells in potwat area, Pakistan

International Nuclear Information System (INIS)

Ahmad, M.; Rafique, M.; Tariq, J.A; Choudhry, M.A.; Hussain, Q.M.

2008-10-01

Isotopes and geochemical techniques were applied to investigate the origin, subsurface history and reservoir temperatures of geothermal springs in Potwar. Two sets of water samples were collected. Surface temperatures of geothermal springs ranges from 52 to 68.3 C. Waters produced by oil wells in Potwar area were also investigated. Geothermal springs of Potwar area are Na-HCO/sub 3/ type, while the waters produced by oil wells are Na-Cl and Ca-Cl types. Source of both the categories of water is meteoric water recharged from the outcrops of the formations in the Himalayan foothills. These waters undergo very high /sup 18/O-shift (up to 18%) due to rock-water interaction at higher temperatures. High salinity of the oil field waters is due to dissolution of marine evaporites. Reservoir temperatures of thermal springs determined by the Na-K geo thermometers are in the range of 56-91 deg. C, while Na-K-Ca, Na-K-Mg, Na-K-Ca-Mg and quartz geo thermometers give higher temperatures up to 177 C. Reservoir temperature determined by /sup 18/O(SO/Sub 4/-H/sub 2/O) geo thermometer ranges from 112 to 138 deg. C. There is wide variation in reservoir temperatures (54-297 deg. C) of oil fields estimated by different chemical geo thermometers. Na-K geo thermometer seems more reliable which gives close estimates to real temperature (about 100 deg. C) determined during drilling of oil wells. (author)

Metal/Carbon Hybrid Nanostructures Produced from Plasma-Enhanced Chemical Vapor Deposition over Nafion-Supported Electrochemically Deposited Cobalt Nanoparticles

Directory of Open Access Journals (Sweden)

Mohammad Islam

2018-04-01

Full Text Available In this work, we report development of hybrid nanostructures of metal nanoparticles (NP and carbon nanostructures with strong potential for catalysis, sensing, and energy applications. First, the etched silicon wafer substrates were passivated for subsequent electrochemical (EC processing through grafting of nitro phenyl groups using para-nitrobenzene diazonium (PNBT. The X-ray photoelectron spectroscope (XPS and atomic force microscope (AFM studies confirmed presence of few layers. Cobalt-based nanoparticles were produced over dip or spin coated Nafion films under different EC reduction conditions, namely CoSO4 salt concentration (0.1 M, 1 mM, reduction time (5, 20 s, and indirect or direct EC reduction route. Extensive AFM examination revealed NP formation with different attributes (size, distribution depending on electrochemistry conditions. While relatively large NP with >100 nm size and bimodal distribution were obtained after 20 s EC reduction in H3BO3 following Co2+ ion uptake, ultrafine NP (<10 nm could be produced from EC reduction in CoSO4 and H3BO3 mixed solution with some tendency to form oxides. Different carbon nanostructures including few-walled or multiwalled carbon nanotubes (CNT and carbon nanosheets were grown in a C2H2/NH3 plasma using the plasma-enhanced chemical vapor deposition technique. The devised processing routes enable size controlled synthesis of cobalt nanoparticles and metal/carbon hybrid nanostructures with unique microstructural features.

ToxCast Data Expands Universe of Chemical-Gene Interactions (SOT)

Science.gov (United States)

Characterizing the effects of chemicals in biological systems is often summarized by chemical-gene interactions, which have sparse coverage in literature. The ToxCast chemical screening program has produced bioactivity data for nearly 2000 chemicals and over 450 gene targets. Thi...

Modern concepts of treatment and prevention of chemical injuries.

Science.gov (United States)

Edlich, Richard F; Farinholt, Heidi-Marie A; Winters, Kathryne L; Britt, L D; Long, William B; Werner, Charles L; Gubler, K Dean

2005-01-01

Chemical injuries are commonly encountered following exposure to acids and alkali, including hydrofluoric acid, formic acid, anhydrous ammonia, cement, and phenol. Other specific agents that cause chemical burns include white phosphorus, elemental metals, nitrates, hydrocarbons, and tar. Even though there are more than 65,000 chemicals available on the market, and an estimated 60,000 new chemicals produced each year, the potential deleterious effects of these chemicals on humans are still unknown. The Superfund Amendments and Reauthorization Act contains extensive provisions for emergency planning and the rights of communities to know about toxic chemical releases. Since 1990, the Agency for Toxic Substances and Disease Registry (ATSDR) has maintained an active, state-based Hazardous Substances Emergency Events Surveillance (HSEES) system to describe the public health consequences risked by access to hazardous chemicals. Most chemical agents damage the skin by producing a chemical reaction rather than hyperthermic injury. Although some chemicals produce considerable heat as a result of an exothermic reaction when they come in contact with water, their ability to produce direct chemical changes on the skin accounts for the most skin injury. Specific chemical changes depend on the agent, including acids, alkalis, corrosives, oxidizing and reducing agents, desiccants, vesicants, and protoplasmic poisons. The concentration of toxic agent and duration of its contact primarily determine degree of skin destruction. Hazardous materials (hazmats) are substances that may injure life and damage the environment if improperly handled. HAZMAT accidents are particularly dangerous for responding personnel, who are in danger from the moment of arrival on the scene until containment of the accident. Consequently, the Superfund Amendment and Reauthorization Act mandates community preparedness for dealing with hazmat accidents. Paramedics and members of the hazmat response team

Obstacles and Opportunites of iPad Use Balance of Acceptance in a Texas School System

Science.gov (United States)

Gros, Lisa Horst

2013-01-01

"A Kindle in Every Backpack", a proposal written by Thomas Z. Freedman and published by the Democratic Leadership council called for a Kindle or some other electronic reading device for every child in the United States in grades kindergarten through 12. The proposal stated that while the electronic reading devices, eReaders, would be…

[Investigation of emergency capacities for occupational hazard accidents in silicon solar cell producing enterprises].

Science.gov (United States)

Yang, D D; Xu, J N; Zhu, B L

2016-11-20

Objective: To investigate and analyze the influential factors of occupational hazard acci-dents, emergency facilities and emergency management in Silicon solar cell producing enterprises, then to pro-vide scientific strategies. Methods: The methods of occupationally healthy field investigating, inspecting of ven-tilation effectiveness, setup of emergency program and wearing chemical suit were used. Results: The mainly occupational hazard accidents factors in the process of Silicon solar cell producing included poisoning chemi-cals, high temperature, onizing radiation and some workplaces. The poisoning chemicals included nitric acid, hydrofluoric acid, sulfuric acid, hydrochloric acid, sodium hydroxide, potassium hydroxide, chlorine, phos-phorus oxychloride, phosphorus pentoxide, nitrogen dioxide, ammonia, silane, and so on; the workplaces in-cluded the area of producing battery slides and auxiliary producing area. Among the nine enterprises, gas detec-tors were installed in special gas supplying stations and sites, but the height, location and alarmvalues of gas detectors in six enterprises were not according with standard criteria; emergency shower and eyewash equip-ment were installed in workplaces with strong corrosive chemicals, but the issues of waste water were not solved; ventilation systems were set in the workplaces with ammonia and silane, but not qualified with part lo-cations and parameters in two enterprises; warehouses with materials of acid, alkali, chemical ammonia and phosphorus oxychloride were equipped with positive - pressure air respirator resuscitator and emergency cabi-nets, but with insufficient quantity in seven enterprises and expiration in part of products. The error rate of set-up emergency program and wearing chemical cloth were 30%~100% and 10%~30%, respectively. Among the nine enterprises, there were emergency rescue plans for dangerous chemical accidents, but without profession-al heatstroke and irradiation accident emergency plans

Chemical energy in electro arc furnace - examples from experience

International Nuclear Information System (INIS)

Shushlevski, Ljupcho; Georgievski, Panche; Hadzhidaovski, Ilija

2004-01-01

Great competition on the market in steel-producing and chemical lack of electrical energy leads to realization of new project in section Steelworks AD 'Makstil' - Skopje named: 'Substitution of electrical energy i.e. entering of additional chemical energy in Electrical arc furnace for steel melting using fuels-naturual gas (CH 4 ), oxygen (O 2 ) and carbon (C)'. It is accumulate experience from two and one half year of intensive use of chemical energy with its accompanying problems, appropriate efficiency and economy in process for steel producing. In 2001 year we announced and described project for using of an additional alternative chemical energy in aggregate Electrical are furnace. In this work we will present realization, working experience and efficiency of the system for generating chemical energy. Practical realization needs serious approach in chemical energy usage The usage of chemical energy brings restrictions and needs many innovation for protection of equipment from shown aggressiveness during the combustion of fuel gasses. (Author)

Microbial production of building block chemicals and polymers.

Science.gov (United States)

Lee, Jeong Wook; Kim, Hyun Uk; Choi, Sol; Yi, Jongho; Lee, Sang Yup

2011-12-01

Owing to our increasing concerns on the environment, climate change, and limited natural resources, there has recently been considerable effort exerted to produce chemicals and materials from renewable biomass. Polymers we use everyday can also be produced either by direct fermentation or by polymerization of monomers that are produced by fermentation. Recent advances in metabolic engineering combined with systems biology and synthetic biology are allowing us to more systematically develop superior strains and bioprocesses for the efficient production of polymers and monomers. Here, we review recent trends in microbial production of building block chemicals that can be subsequently used for the synthesis of polymers. Also, recent successful cases of direct one-step production of polymers are reviewed. General strategies for the production of natural and unnatural platform chemicals are described together with representative examples. Copyright © 2011 Elsevier Ltd. All rights reserved.

Low temperature radio-chemical energy conversion processes

International Nuclear Information System (INIS)

Gomberg, H.J.

1986-01-01

This patent describes a radio-chemical method of converting radiated energy into chemical energy form comprising the steps of: (a) establishing a starting chemical compound in the liquid phase that chemically reacts endothermically to radiation and heat energy to produce a gaseous and a solid constituent of the compound, (b) irradiating the compound in its liquid phase free of solvents to chemically release therefrom in response to the radiation the gaseous and solid constituents, (c) physically separating the solid and gaseous phase constituents from the liquid, and (d) chemically processing the constituents to recover therefrom energy stored therein by the irradiation step (b)

Metabolic engineering of a glycerol-oxidative pathway in Lactobacillus panis PM1 for utilization of bioethanol thin stillage: potential to produce platform chemicals from glycerol.

Science.gov (United States)

Kang, Tae Sun; Korber, Darren R; Tanaka, Takuji

2014-12-01

Lactobacillus panis PM1 has the ability to produce 1,3-propanediol (1,3-PDO) from thin stillage (TS), which is the major waste material after bioethanol production, and is therefore of significance. However, the fact that L. panis PM1 cannot use glycerol as a sole carbon source presents a considerable problem in terms of utilization of this strain in a wide range of industrial applications. Accordingly, L. panis PM1 was genetically engineered to directly utilize TS as a fermentable substrate for the production of valuable platform chemicals without the need for exogenous nutrient supplementation (e.g., sugars and nitrogen sources). An artificial glycerol-oxidative pathway, comprised of glycerol facilitator, glycerol kinase, glycerol 3-phosphate dehydrogenase, triosephosphate isomerase, and NADPH-dependent aldehyde reductase genes of Escherichia coli, was introduced into L. panis PM1 in order to directly utilize glycerol for the production of energy for growth and value-added chemicals. A pH 6.5 culture converted glycerol to mainly lactic acid (85.43 mM), whereas a significant amount of 1,3-propanediol (59.96 mM) was formed at pH 7.5. Regardless of the pH, ethanol (82.16 to 83.22 mM) was produced from TS fermentations, confirming that the artificial pathway metabolized glycerol for energy production and converted it into lactic acid or 1,3-PDO and ethanol in a pH-dependent manner. This study demonstrates the cost-effective conversion of TS to value-added chemicals by the engineered PM1 strain cultured under industrial conditions. Thus, application of this strain or these research findings can contribute to reduced costs of bioethanol production. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

Chemical evolutionary games.

Science.gov (United States)

Aristotelous, Andreas C; Durrett, Richard

2014-05-01

Inspired by the use of hybrid cellular automata in modeling cancer, we introduce a generalization of evolutionary games in which cells produce and absorb chemicals, and the chemical concentrations dictate the death rates of cells and their fitnesses. Our long term aim is to understand how the details of the interactions in a system with n species and m chemicals translate into the qualitative behavior of the system. Here, we study two simple 2×2 games with two chemicals and revisit the two and three species versions of the one chemical colicin system studied earlier by Durrett and Levin (1997). We find that in the 2×2 examples, the behavior of our new spatial model can be predicted from that of the mean field differential equation using ideas of Durrett and Levin (1994). However, in the three species colicin model, the system with diffusion does not have the coexistence which occurs in the lattices model in which sites interact with only their nearest neighbors. Copyright © 2014 Elsevier Inc. All rights reserved.

Biomass pyrolysis for chemicals

Energy Technology Data Exchange (ETDEWEB)

De Wild, P.

2011-07-15

The problems associated with the use of fossil fuels demand a transition to renewable sources (sun, wind, water, geothermal, biomass) for materials and energy where biomass provides the only renewable source for chemicals. In a biorefinery, biomass is converted via different technologies into heat, power and various products. Here, pyrolysis (thermal degradation without added oxygen) of lignocellulosic biomass can play an important role, because it leads to an array of useful chemicals. Examples are furfural and acetic acid from hemicellulose, levoglucosan from cellulose and phenols and biochar from lignin. Since the three major biomass polymers hemicellulose, cellulose and lignin possess dissimilar thermal stabilities and reactivities, type and amount of degradation products are tunable by proper selection of the pyrolysis conditions. To determine if step-wise pyrolysis would be suitable for the production of chemicals, staged degasification of lignocellulosic biomass was studied. Due to limited yields, a hot pressurized water pre-treatment (aquathermolysis) followed by pyrolysis was subsequently developed as an improved version of a staged approach to produce furfural and levoglucosan from the carbohydrate fraction of the biomass. Lignin is the only renewable source for aromatic chemicals. Lignocellulosic biorefineries for bio-ethanol produce lignin as major by-product. The pyrolysis of side-streams into valuable chemicals is of prime importance for a profitable biorefinery. To determine the added-value of lignin side-streams other than their use as fuel for power, application research including techno-economic analysis is required. In this thesis, the pyrolytic valorisation of lignin into phenols and biochar was investigated and proven possible.

Organic substances in produced and formation water from unconventional natural gas extraction in coal and shale

Science.gov (United States)

Orem, William H.; Tatu, Calin A.; Varonka, Matthew S.; Lerch, Harry E.; Bates, Anne L.; Engle, Mark A.; Crosby, Lynn M.; McIntosh, Jennifer

2014-01-01

Organic substances in produced and formation water from coalbed methane (CBM) and gas shale plays from across the USA were examined in this study. Disposal of produced waters from gas extraction in coal and shale is an important environmental issue because of the large volumes of water involved and the variable quality of this water. Organic substances in produced water may be environmentally relevant as pollutants, but have been little studied. Results from five CBM plays and two gas shale plays (including the Marcellus Shale) show a myriad of organic chemicals present in the produced and formation water. Organic compound classes present in produced and formation water in CBM plays include: polycyclic aromatic hydrocarbons (PAHs), heterocyclic compounds, alkyl phenols, aromatic amines, alkyl aromatics (alkyl benzenes, alkyl biphenyls), long-chain fatty acids, and aliphatic hydrocarbons. Concentrations of individual compounds range from gas shale unimpacted by production chemicals have a similar range of compound classes as CBM produced water, and TOC levels of about 8 mg/L. However, produced water from the Marcellus Shale using hydraulic fracturing has TOC levels as high as 5500 mg/L and a range of added organic chemicals including, solvents, biocides, scale inhibitors, and other organic chemicals at levels of 1000 s of μg/L for individual compounds. Levels of these hydraulic fracturing chemicals and TOC decrease rapidly over the first 20 days of water recovery and some level of residual organic contaminants remain up to 250 days after hydraulic fracturing. Although the environmental impacts of the organics in produced water are not well defined, results suggest that care should be exercised in the disposal and release of produced waters containing these organic substances into the environment because of the potential toxicity of many of these substances.

Chemical Data Reporting rule (CDR)

Data.gov (United States)

U.S. Environmental Protection Agency — This dataset contains information on chemicals that company's produce domestically or import into the United States during the principal reporting year. For the 2012...

Odor concentration invariance by chemical ratio coding

Directory of Open Access Journals (Sweden)

Naoshige Uchida

2008-08-01

Full Text Available Many animal species rely on chemical signals to extract ecologically important information from the environment. Yet in natural conditions chemical signals will frequently undergo concentration changes that produce differences in both level and pattern of activation of olfactory receptor neurons. Thus, a central problem in olfactory processing is how the system is able to recognize the same stimulus across different concentrations. To signal species identity for mate recognition, some insects use the ratio of two components in a binary chemical mixture to produce a code that is invariant to dilution. Here, using psychophysical methods, we show that rats also classify binary odor mixtures according to the molar ratios of their components, spontaneously generalizing over at least a tenfold concentration range. These results indicate that extracting chemical ratio information is not restricted to pheromone signaling and suggest a general solution for concentration-invariant odor recognition by the mammalian olfactory system.

Oxidative stability during storage of structured lipids produced from fish oil and caprylic acid

DEFF Research Database (Denmark)

Nielsen, Nina Skall; Xu, Xuebing; Timm Heinrich, Maike

2004-01-01

Structured lipids produced by enzymatic or chemical methods for different applications have been receiving considerable attention. The oxidative stability of a randomized structured lipid (RFO), produced by chemical interesterification from fish oil (FO) and tricaprylin, and a specific structured...... lipid (SFO), produced by enzymatic interesterification from the same oil and caprylic acid, was compared with the stability of FO. Oils were stored at 2degreesC for 11 wk followed by storage at 20degreesC for 6 wk. In addition, the antioxidative effect of adding the metal chelators EDTA or citric acid...

Chemical and structural characterization of hydroxamate siderophore produced by marine Vibrio harveyi.

Science.gov (United States)

Murugappan, R M; Aravinth, A; Karthikeyan, M

2011-02-01

In the present study, 22 different bacteria were isolated from open ocean water from the Gulf of Mannar, India. Of the 22 isolates, 4 were identified as Vibrio spp. (VM1, VM2, VM3 and VM4) and found to produce siderophores (iron-binding chelators) under iron-limited conditions. Different media were found to have an influence on siderophore production. Maximum siderophore production was observed with VM1 isolate in MM9 salts medium at 48 h of incubation. The isolate was confirmed as Vibrio harveyi based on 16S rRNA gene sequencing and phylogenetic analysis. Fourier-transform infrared (FTIR) and (1)H nuclear magnetic resonance (NMR) spectra revealed the hydroxamate nature of the siderophore produced. Further characterization of the siderophore revealed it to be of dihydroxamate nature, forming hexadentate ligands with Fe(III) ions. A narrow shift in ultraviolet (UV)-Vis spectrum was observed on photolysis due to ligand oxidation. Growth-promotion bioassay with Aeromonas hydrophila, Staphylococcus aureus and E. coli confirmed the iron-scavenging property of the siderophore produced by Vibrio harveyi.

Chemical Gel for Surface Decontamination

International Nuclear Information System (INIS)

Jung, Chong Hun; Moon, J. K.; Won, H. J.; Lee, K. W.; Kim, C. K.

2010-01-01

Many chemical decontamination processes operate by immersing components in aggressive chemical solutions. In these applications chemical decontamination technique produce large amounts of radioactive liquid waste. Therefore it is necessary to develop processes using chemical gels instead of chemical solutions, to avoid the well-known disadvantages of chemical decontamination techniques while retaining their high efficiency. Chemical gels decontamination process consists of applying the gel by spraying it onto the surface of large area components (floors, walls, etc) to be decontaminated. The gel adheres to any vertical or complex surface due to their thixotropic properties and operates by dissolving the radioactive deposit, along with a thin layer of the gel support, so that the radioactivity trapped at the surface can be removed. Important aspects of the gels are that small quantities can be used and they show thixitropic properties : liquid during spraying, and solid when stationary, allowing for strong adherence to surfaces. This work investigates the decontamination behaviors of organic-based chemical gel for SS 304 metallic surfaces contaminated with radioactive materials

eBooks--Ready for School Libraries?

Science.gov (United States)

Pappas, Marjorie

2009-01-01

For those who tend to purchase many books for personal or professional use, the eBook reader would easily pay for itself within a year. The two leading brands of eBook readers today are the Amazon Kindle and the Sony Book Reader. Both are similar in size, weight, and purchase price. The Kindle includes a keyboard while the Reader provides access…

Comparison of vermicompost characteristics produced from sewage sludge of wood and paper industry and household solid wastes.

Science.gov (United States)

Amouei, A I; Yousefi, Z; Khosravi, T

2017-01-01

The aim of this study was to determine the potential of produced compost from the sludge of wastewater treatment plant using earthworms and compare it with the vermicompost produced from household solid waste. In the current study, three treatments with the same conditions in terms of organic wastes type were prepared to produce vermicompost from household solid waste and sewage sludges using earthworms. The standard methods were used to determine the physical and chemical parameters in the different produced vermicomposts. The mean of C/N in the household solid waste, raw biological and chemical sludges was 32, 22.5, and 26.5, respectively. These levels were 16.5, 14.5, and 15 in the vermicomposts. The mean of nitrogen and phosphorus percentages in the vermicompost of solid waste, biological and chemical sludges was 2.2%, 2.6%, 2.3% and 0.72%, 0.54%, and 0.56%, respectively. The mean percentages of organic matters in the initial substrates and vermicomposts of solid waste, biological and chemical sludges were 97.2%, 90%, 80.5% and 65.8%, 67.8% and 63% respectively. The concentrations of heavy metals decreased in all vermicomposts. The EC levels in solid waste, biological and chemical sludges were 1459, 1041, and 1487 μs/cm, respectively. These levels were 544, 385 and 635 μs/cm in the produced compost. Eisenia fetida can convert household solid waste, and biological and chemical sludges produced from wastewater treatment plant into a high-quality and acceptable compost.

Recycling of aluminum to produce green energy

Energy Technology Data Exchange (ETDEWEB)

Martinez, Susana Silva; Lopez Benites, Wendy; Alvarez Gallegos, Alberto A. [Centro de Investigacion en Ingenieria y Ciencias Aplicadas, Av. Universidad 1001, Col. Chamilpa, Cuernavaca, Morelos C.P. 62210 (Mexico); Sebastian, P.J. [Centro de Investigacion en Energia-UNAM, 62580 Temixco, Morelos (Mexico)

2005-07-15

High-purity hydrogen gas was generated from the chemical reaction of aluminum with sodium hydroxide. Several molar relations of sodium hydroxide/aluminum were investigated in this study. The experimental results showed that hydrogen yields are acceptable and its purity was good enough to be used in a proton exchange membrane (PEM) fuel cell to produce electricity. An estimation of the amount of energy produced from the reaction of 100 aluminum cans with caustic soda showed that the hydrogen production is feasible to be scaled up to reach up to 5kWh in a few hours. This study is environmentally friendly and also shows that green energy can be produced from aluminum waste at a low cost.

Plant cell tissue culture: A potential source of chemicals

Energy Technology Data Exchange (ETDEWEB)

Scott, C.D.; Dougall, D.K.

1987-08-01

Higher plants produce many industrially important products. Among these are drugs and medicinal chemicals, essential oils and flavors, vegetable oils and fats, fine and specialty chemicals, and even some commodity chemicals. Although, currently, whole-plant extraction is the primary means of harvesting these materials, the advent of plant cell tissue culture could be a much more effective method of producing many types of phytochemicals. The use of immobilized plant cells in an advanced bioreactor configuration with excretion of the product into the reactor medium may represent the most straightforward way of commercializing such techniques for lower-value chemicals. Important research and development opportunities in this area include screening for plant cultures for nonmedical, lower-value chemicals; understanding and controlling plant cell physiology and biochemistry; optimizing effective immobilization methods; developing more efficient bioreactor concepts; and perfecting product extraction and purification techniques. 62 refs., 2 figs.

CHEMICAL LEUCODERMA: INDIAN SCENARIO, PROGNOSIS, AND TREATMENT

Science.gov (United States)

Bajaj, A K; Saraswat, Abir; Srivastav, P K

2010-01-01

Chemical leucoderma is an industrial disorder in developed countries and the common causative chemicals are phenols and catechols. Due to stringent controls and preventive measures the incidence has come down. In the recent past various chemicals in consumer products have also been documented to produce depigmentation. In India due to lax quality control measures chemical leucoderma due to consumer items is not uncommon.The various consumer items documented to cause contact depigmentation are sticker bindis, rain shoes, plastic chappals, hair dye/ black henna(kali mehndi), alta, wallets and even mobile plastic covers. PMID:21063517

Chemical leucoderma: Indian scenario, prognosis, and treatment

Directory of Open Access Journals (Sweden)

Bajaj A

2010-01-01

Full Text Available Chemical leucoderma is an industrial disorder in developed countries and the common causative chemicals are phenols and catechols. Due to stringent controls and preventive measures the incidence has come down. In the recent past various chemicals in consumer products have also been documented to produce depigmentation.In India due to lax quality control measures chemical leucoderma due to consumer items is not uncommon.The various consumer items documented to cause contact depigmentation are sticker bindis,rain shoes,plastic chappals,hair dye/ black henna( kali mehndi, alta, wallets and even mobile plastic covers.

Reading from electronic devices versus hardcopy text.

Science.gov (United States)

Hue, Jennifer E; Rosenfield, Mark; Saá, Gianinna

2014-01-01

The use of electronic reading devices has increased dramatically. However, some individuals report increased visual symptoms when reading from electronic screens. This investigation compared reading from two electronic devices (Amazon Kindle or Apple Ipod) versus hardcopy text in two groups of 20 subjects. Subjects performed a 20 min reading task for each condition. Both the accommodative response and reading rate were monitored during the trial. Immediately post-task, subjects completed a questionnaire concerning the ocular symptoms experienced during the task. In comparing the Kindle with hardcopy, no significant difference in the total symptom score was observed, although the mean score for the symptoms of tired eyes and eye discomfort was significantly higher with the Kindle. No significant differences in reading rate were found. When comparing the Ipod with hardcopy, no significant differences in symptom scores were found. The mean reading rate with the Ipod was significantly slower than for hardcopy while the mean lag of accommodation was significantly larger for the Ipod. Given the significant increase in symptoms with the Kindle, and larger lag of accommodation and reduced reading rate with the Ipod, one may conclude that reading from electronic devices is not equivalent to hardcopy.

Coprecipitation experiment with Sm hydroxide using a multitracer produced by nuclear spallation reaction: A tool for chemical studies with superheavy elements

International Nuclear Information System (INIS)

Kasamatsu, Yoshitaka; Yokokita, Takuya; Toyomura, Keigo; Shigekawa, Yudai; Haba, Hiromitsu; Kanaya, Jumpei; Huang, Minghui; Ezaki, Yutaka; Yoshimura, Takashi; Morita, Kosuke; Shinohara, Atsushi

2016-01-01

To establish a new methodology for superheavy element chemistry, the coprecipitation behaviors of 34 elements with samarium hydroxide were investigated using multitracer produced by a spallation of Ta. The chemical reactions were rapidly equilibrated within 10 s for many elements. In addition, these elements exhibited individual coprecipitation behaviors, and the behaviors were qualitatively related to their hydroxide precipitation behaviors. It was demonstrated that the ammine and hydroxide complex formations of superheavy elements could be investigated using the established method. - Highlights: • We established a new methodology for superheavy element (SHE) chemistry. • Coprecipitation behaviors of 34 elements with Sm hydroxide could be simultaneously investigated by using multitracer. • The complex formations were investigated from the coprecipitation behaviors. • The established method will lead to the study on various precipitates of SHEs.

Hydrogen production by ethanol partial oxidation over nano-iron oxide catalysts produced by chemical vapour synthesis

Energy Technology Data Exchange (ETDEWEB)

Ahmed, Wael Ahmed Abou Taleb Sayed

2011-01-13

This work presents the experimental results of the synthesis of unsupported and supported SiC iron oxide nanoparticles and their catalytic activity towards ethanol partial oxidation. For comparison, further unsupported iron oxide phases were investigated towards the ethanol partial oxidation. These {gamma}-Fe{sub 2}O{sub 3} and {alpha}/{gamma}-Fe{sub 2}O{sub 3} phase catalysts were prepared by the CVS method using Fe(CO){sub 5} as precursor, supplied by another author. The {alpha}-Fe{sub 2}O{sub 3} and SiC nanoparticles were prepared by the CVS method using a home made hot wall reactor technique at atmospheric pressure. Ferrocene and tetramethylsilane were used as precursor for the production process. Process parameters of precursor evaporation temperature, precursor concentration, gas mixture velocity and gas mixture dilution were investigated and optimised to produce particle sizes in a range of 10 nm. For Fe{sub 2}O{sub 3}/SiC catalyst series production, a new hot wall reactor setup was used. The particles were produced by simultaneous thermal decomposition of ferrocene and tetramethylsilane in one reactor from both sides. The production parameters of inlet tube distance inside the reactor, precursor evaporation temperature and carrier gas flow were investigated to produce a series of samples with different iron oxide content. The prepared catalysts composition, physical and chemical properties were characterized by XRD, EDX, SEM, BET surface area, FTIR, XPS and dynamic light scattering (DLS) techniques. The catalytic activity for the ethanol gas-phase oxidation was investigated in a temperature range from 260 C to 290 C. The product distributions obtained over all catalysts were analysed with mass spectrometry analysis tool. The activity of bulk Fe{sub 2}O{sub 3} and SiC nanoparticles was compared with prepared nano-iron oxide phase catalysts. The reaction parameters, such as reaction temperature and O{sub 2}/ethanol ratio were investigated. The catalysts

A Molecular Explanation of How the Fog Is Produced When Dry Ice Is Placed in Water

Science.gov (United States)

Kuntzleman, Thomas S.; Ford, Nathan; No, Jin-Hwan; Ott, Mark E.

2015-01-01

Everyone enjoys seeing the cloudy white fog generated when solid carbon dioxide (dry ice) is placed in water. Have you ever wondered what physical and chemical processes occur to produce this fog? When asked this question, many chemical educators suggest that the fog is produced when atmospheric water vapor condenses on cold carbon dioxide gas…

In vitro transformation: interactions of chemical carcinogens and radiation

International Nuclear Information System (INIS)

DiPaolo, J.A.

1976-01-01

The development of reproducible quantitative in vitro procedures resulting in neoplastic transformation of mammalian cells has made possible the separation of events related to the process leading to transformation from secondary events that interfere with the early recognition of transformation. The use of chemical carcinogens on Syrian hamster cell strains results in a dose-response relation consistent with a Poisson distribution, indicating that the transformation phenomenon is inductive. In some circumstances, the joint action or interaction of chemical carcinogens with other agents results in an increased incidence of transformation. The pretreatment of Syrian hamster cells with ionizing radiation (250 R) or alkylating chemicals enhances the frequency of transformation on a cell or colony basis ordinarily obtained with known chemical carcinogens. Pretreatment with non-ionizing irradiation (uv, 254 nm) did not have a similar effect. The two types of irradiation and the alkylating agents reduced the cloning efficiency of the cells. X ray alone produced no transformation; the alkylating chemicals produced transformations infrequently, whereas uv produced a significant number of transformations. The number of transformations associated with uv is increased by pretreatment of the cells by x-irradiation. The enhancement of transformation by x-ray or x-ray-type agents appears to be independent of the type of second carcinogen used

Dual purpose microalgae-bacteria-based systems that treat wastewater and produce biodiesel and chemical products within a biorefinery.

Science.gov (United States)

Olguín, Eugenia J

2012-01-01

Excess greenhouse gas emissions and the concomitant effect on global warming have become significant environmental, social and economic threats. In this context, the development of renewable, carbon-neutral and economically feasible biofuels is a driving force for innovation worldwide. A lot of effort has been put into developing biodiesel from microalgae. However, there are still a number of technological, market and policy barriers that are serious obstacles to the economic feasibility and competitiveness of such biofuels. Conversely, there are also a number of business opportunities if the production of such alternative biofuel becomes part of a larger integrated system following the Biorefinery strategy. In this case, other biofuels and chemical products of high added value are produced, contributing to an overall enhancement of the economic viability of the whole integrated system. Additionally, dual purpose microalgae-bacteria-based systems for treating wastewater and production of biofuels and chemical products significantly contribute to a substantial saving in the overall cost of microalgae biomass production. These types of systems could help to improve the competitiveness of biodiesel production from microalgae, according to some recent Life Cycle Analysis studies. Furthermore, they do not compete for fresh water resources for agricultural purposes and add value to treating the wastewater itself. This work reviews the most recent and relevant information about these types of dual purpose systems. Several aspects related to the treatment of municipal and animal wastewater with simultaneous recovery of microalgae with potential for biodiesel production are discussed. The use of pre-treated waste or anaerobic effluents from digested waste as nutrient additives for weak wastewater is reviewed. Isolation and screening of microalgae/cyanobacteria or their consortia from various wastewater streams, and studies related to population dynamics in mixed cultures

Engineering cyanobacteria for fuels and chemicals production.

Science.gov (United States)

Zhou, Jie; Li, Yin

2010-03-01

The world's energy and global warming crises call for sustainable, renewable, carbon-neutral alternatives to replace fossil fuel resources. Currently, most biofuels are produced from agricultural crops and residues, which lead to concerns about food security and land shortage. Compared to the current biofuel production system, cyanobacteria, as autotrophic prokaryotes, do not require arable land and can grow to high densities by efficiently using solar energy, CO(2), water, and inorganic nutrients. Moreover, powerful genetic techniques of cyanobacteria have been developed. For these reasons, cyanobacteria, which carry out oxygenic photosynthesis, are attractive hosts for production of fuels and chemicals. Recently, several chemicals including ethanol, isobutanol and isoprene have been produced by engineered cyanobacteria directly using solar energy, CO(2), and water. Cyanobacterium is therefore a potential novel cell factory for fuels and chemicals production to address global energy security and climate change issues.

Physico-chemical characteristics of oil produced from seeds of some date palm cultivars (Phoenix dactylifera L.) .

Science.gov (United States)

Soliman, S S; Al-Obeed, R S; Ahmed, T A

2015-03-01

The oil content of saturated and unsaturated fatty acids with some physico-chemical properties and nutrients were investigated in oil produced from seeds of six important date palm cultivars and one seed strain present in Saudi Arabia. The results indicated that the oil extracted from six seed cultivars of date palm ranged from 6.73-10.89% w/w oil. The refractive index of date seeds oil was found to be between 1.4574 to 1.4615. The iodine values, acid values and saponification values were in the range of 74.2-86.6 g iodine 100 g(-1); 2.50-2.58 mg KOH g(-1) and 0.206-0.217 mg KOH g(-1), respectively. Lauric acid, Myristic acid, Palmitic acid C15, Palmitic acid C16 Stearic acid, Arachidic acid and Behenic acid of date seeds oil contents were found between 8.67-49.27; 7.01-15.43; 0-0.57; 4.82-18.09; 1.02-7.86; 0-0.08; and 0-0.15% w/w, in that order. Omega-6 and Omega-9 of date seeds oil were found between 7.31-17.87 and 52.12-58.78%, respectively. Khalas, Barhy cvs. and seed strain gave highest K and Ca, Na and Fe, Mg as compared with other studied cultivars.

Development of activated carbon pore structure via physical and chemical activation of biomass fibre waste

International Nuclear Information System (INIS)

Williams, Paul T.; Reed, Anton R.

2006-01-01

Biomass waste in the form of biomass flax fibre, produced as a by-product of the textile industry was processed via both physical and chemical activation to produce activated carbons. The surface area of the physically activated carbons were up to 840 m 2 g -1 and the carbons were of mesoporous structure. Chemical activation using zinc chloride produced high surface area activated carbons up to 2400 m 2 g -1 and the pore size distribution was mainly microporous. However, the process conditions of temperature and zinc chloride concentration could be used to manipulate the surface area and porosity of the carbons to produce microporous, mesoporous and mixed microporous/mesoporous activated carbons. The physically activated carbons were found to be a mixture of Type I and Type IV carbons and the chemically activated carbons were found to be mainly Type I carbons. The development of surface morphology of physically and chemically activated carbons observed via scanning electron microscopy showed that physical activation produced activated carbons with a nodular and pitted surface morphology whereas activated carbons produced through chemical activation had a smooth surface morphology. Transmission electron microscopy analysis could identify mesopore structures in the physically activated carbon and microporous structures in the chemically activated carbons

Kinetics of exoglucanase and endoglucanase produced by ...

African Journals Online (AJOL)

enoh

2012-04-05

Apr 5, 2012 ... Zn2+, Ca2+, Mn2+ and Co2+ enhanced the crude activity of EXG and EG ... processes for producing fuels and chemicals from plant ... increasing the yield of the fruit juices, oil extraction and in ... Trichoderma, Humicola and Aspergillus species were .... observation that stability of the fungal cellulases is.

Report on evaluation of research and development of methods for producing basic chemicals from carbon monoxide and other stocks; Issanka tanso nado wo genryo to suru kiso kagakuhin no seizoho no kenkyu kaihatsu ni kansuru hyoka hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-08-01

This project was aimed at developing methods for producing basic chemicals from carbon monoxide and other stocks (the so-called C1 chemistry), in order to establish the techniques that could promote stable supply of basic chemicals from the new carbon resources in place of oil. It was a 7-year national project beginning in FY 1980, jointly implemented by the government, academic and industrial circles. Described herein are the overall evaluation of the results. There are several carbon resources other than oil, e.g., coal, natural gas, oil shale and tar sand. They are abundantly occurring, although unevenly, and various countries are developing these resources. They can be advantageously utilized as stocks for chemicals, after being converted into synthesis gases. In Japan, they have been efficiently developed cooperatively by national institutes, enterprises, academic circles and chemical industry, to produce the world's results, e.g., gas separation/purification techniques and new catalysts for new synthesis methods. This project was terminated because of the relaxed oil supply/demand situations and lowered crude prices in the middle of the 80's, which made stock conversion less urgent. (NEDO)

Report on evaluation of research and development of methods for producing basic chemicals from carbon monoxide and other stocks; Issanka tanso nado wo genryo to suru kiso kagakuhin no seizoho no kenkyu kaihatsu ni kansuru hyoka hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1987-08-01

This project was aimed at developing methods for producing basic chemicals from carbon monoxide and other stocks (the so-called C1 chemistry), in order to establish the techniques that could promote stable supply of basic chemicals from the new carbon resources in place of oil. It was a 7-year national project beginning in FY 1980, jointly implemented by the government, academic and industrial circles. Described herein are the overall evaluation of the results. There are several carbon resources other than oil, e.g., coal, natural gas, oil shale and tar sand. They are abundantly occurring, although unevenly, and various countries are developing these resources. They can be advantageously utilized as stocks for chemicals, after being converted into synthesis gases. In Japan, they have been efficiently developed cooperatively by national institutes, enterprises, academic circles and chemical industry, to produce the world's results, e.g., gas separation/purification techniques and new catalysts for new synthesis methods. This project was terminated because of the relaxed oil supply/demand situations and lowered crude prices in the middle of the 80's, which made stock conversion less urgent. (NEDO)

Chemical lasers in the visible

International Nuclear Information System (INIS)

Jones, C.R.; Broida, H.P.

1974-01-01

Since the beginning of the laser era in 1960, a continuing search for chemical lasers has been carried out. This quest has been influenced by the knowledge that many chemical reactions produce visible chemiluminescence and, therefore, partition some of the reaction products into emitting, electronically excited states. Such luminescence has been observed not only from low-pressure, gas-phase reactions, notably those of alkali metals and halogens, but also from a limited number of liquid-phase reactions. (U.S.)

Phytotoxins Produced by Fungi Associated with Grapevine Trunk Diseases

Science.gov (United States)

Andolfi, Anna; Mugnai, Laura; Luque, Jordi; Surico, Giuseppe; Cimmino, Alessio; Evidente, Antonio

2011-01-01

Up to 60 species of fungi in the Botryosphaeriaceae family, genera Cadophora, Cryptovalsa, Cylindrocarpon, Diatrype, Diatrypella, Eutypa, Eutypella, Fomitiporella, Fomitiporia, Inocutis, Phaeoacremonium and Phaeomoniella have been isolated from decline-affected grapevines all around the World. The main grapevine trunk diseases of mature vines are Eutypa dieback, the esca complex and cankers caused by the Botryospheriaceae, while in young vines the main diseases are Petri and black foot diseases. To understand the mechanism of these decline-associated diseases and the symptoms associated with them, the toxins produced by the pathogens involved in these diseases were isolated and characterised chemically and biologically. So far the toxins of only a small number of these decline fungi have been studied. This paper presents an overview of the toxins produced by the most serious of these vine wood pathogens: Eutypa lata, Phaeomoniella chlamydospora, Phaeoacremonium aleophilum and some taxa in the Botryosphaeriaceae family, and examines how these toxins produce decline symptoms. The chemical structure of these metabolites and in some cases their vivotoxin nature are also discussed. PMID:22295177

Phytotoxins Produced by Fungi Associated with Grapevine Trunk Diseases

Directory of Open Access Journals (Sweden)

Antonio Evidente

2011-12-01

Full Text Available Up to 60 species of fungi in the Botryosphaeriaceae family, genera Cadophora, Cryptovalsa, Cylindrocarpon, Diatrype, Diatrypella, Eutypa, Eutypella, Fomitiporella, Fomitiporia, Inocutis, Phaeoacremonium and Phaeomoniella have been isolated from decline-affected grapevines all around the World. The main grapevine trunk diseases of mature vines are Eutypa dieback, the esca complex and cankers caused by the Botryospheriaceae, while in young vines the main diseases are Petri and black foot diseases. To understand the mechanism of these decline-associated diseases and the symptoms associated with them, the toxins produced by the pathogens involved in these diseases were isolated and characterised chemically and biologically. So far the toxins of only a small number of these decline fungi have been studied. This paper presents an overview of the toxins produced by the most serious of these vine wood pathogens: Eutypa lata, Phaeomoniella chlamydospora, Phaeoacremonium aleophilum and some taxa in the Botryosphaeriaceae family, and examines how these toxins produce decline symptoms. The chemical structure of these metabolites and in some cases their vivotoxin nature are also discussed.

Analysis of potential fumonisin-producing Fusarium species in corn products from three main maize-producing areas in eastern China.

Science.gov (United States)

Zhang, Liping; Wang, Jiansheng; Zhang, Chulong; Wang, Qiaomei

2013-02-01

Fusarium species are common fungal contaminants of maize and a number of them can produce mycotoxin fumonisins. China is one of the largest maize producers in the world. This study investigated the contamination of maize samples from three areas in eastern China by Fusarium and fumonisin-producing fungi as well as their fumonisin-producing potential. A total of 22 Fusarium strains were isolated, 19 of which were able to produce fumonisin. Among the 19 strains, 16 belonged to F. verticillioides, two to F. subglutinans and one to F. proliferatum. The majority (17/19) of the fumonisin-forming strains were high FB(1) producers, which is a potential health risk for the population in these areas. Fusarium contamination in samples from the mideastern area was the most serious (11 Fusarium strains, with nine producing fumonisin, isolated from 24 samples), followed by the northeastern area (nine Fusarium strains, with all nine producing fumonisin, isolated from 21 samples) and the southeastern area (two Fusarium strains, with one producing fumonisin, isolated from 19 samples). Although the overall levels of FBs and contamination by fumonisin-producing fungi in corn samples were not serious, the contaminating Fusarium strains possessed fairly strong toxicogenic ability and potential risk for food safety. Copyright © 2012 Society of Chemical Industry.

Lipase-producing fungi for potential wastewater treatment and ...

African Journals Online (AJOL)

Tuoyo Aghomotsegin

2016-05-04

May 4, 2016 ... food, chemical, and pharmaceutical industry means the current global ... be the most convenient biosystem for industrial applications ... Fungi are capable of producing several enzymes for ... strains, and the process results in losses to the isolation ..... technical and economic burdens of lipase production.

Performance Evaluation of Produced Water Quality from a ...

African Journals Online (AJOL)

Michael Horsfall

1Department of Chemical Engineering, Federal University of Technology, Owerri, Nigeria, ... ABSTRACT: Produced water, which is a mixture of organic and inorganic compounds, is a major waste ... from one viewpoint, an approach to reducing adverse environmental ... pipette onto a glass-fiber filter with applied vacuum.

An analysis of chemicals and other constituents found in produced water from hydraulically fractured wells in California and the challenges for wastewater management.

Science.gov (United States)

Chittick, Emily A; Srebotnjak, Tanja

2017-12-15

As high-volume hydraulic fracturing (HF) has grown substantially in the United States over the past decade, so has the volume of produced water (PW), i.e., briny water brought to the surface as a byproduct of oil and gas production. According to a recent study (Groundwater Protection Council, 2015), more than 21 billion barrels of PW were generated in 2012. In addition to being high in TDS, PW may contain hydrocarbons, PAH, alkylphenols, naturally occurring radioactive material (NORM), metals, and other organic and inorganic substances. PW from hydraulically fractured wells includes flowback water, i.e., injection fluids containing chemicals and additives used in the fracturing process such as friction reducers, scale inhibitors, and biocides - many of which are known to cause serious health effects. It is hence important to gain a better understanding of the chemical composition of PW and how it is managed. This case study of PW from hydraulically fractured wells in California provides a first aggregate chemical analysis since data collection began in accordance with California's 2013 oil and gas well stimulation law (SB4, Pavley). The results of analyzing one-time wastewater analyses of 630 wells hydraulically stimulated between April 1, 2014 and June 30, 2015 show that 95% of wells contained measurable and in some cases elevated concentrations of BTEX and PAH compounds. PW from nearly 500 wells contained lead, uranium, and/or other metals. The majority of hazardous chemicals known to be used in HF operations, including formaldehyde and acetone, are not reported in the published reports. The prevalent methods for dealing with PW in California - underground injection and open evaporation ponds - are inadequate for this waste stream due to risks from induced seismicity, well integrity failure, well upsets, accidents and spills. Beneficial reuse of PW, such as for crop irrigation, is as of yet insufficiently safety tested for consumers and agricultural workers as

Deteminants of market orientation among cassava producers in Abia ...

African Journals Online (AJOL)

Deteminants of market orientation among cassava producers in Abia state, Nigeria. ... Journal Home > Vol 48, No 1 (2017) > ... as farm inputs like hiring of farm machinery, provision of fertilizers and chemicals to farmers at a subsidized rate.

Surface qualities after chemical-mechanical polishing on thin films

International Nuclear Information System (INIS)

Fu, Wei-En; Lin, Tzeng-Yow; Chen, Meng-Ke; Chen, Chao-Chang A.

2009-01-01

Demands for substrate and film surface planarizations significantly increase as the feature sizes of Integrated Circuit (IC) components continue to shrink. Chemical Mechanical Polishing (CMP), incorporating chemical and mechanical interactions to planarize chemically modified surface layers, has been one of the major manufacturing processes to provide global and local surface planarizations in IC fabrications. Not only is the material removal rate a concern, the qualities of the CMP produced surface are critical as well, such as surface finish, defects and surface stresses. This paper is to examine the CMP produced surface roughness on tungsten or W thin films based on the CMP process conditions. The W thin films with thickness below 1000 nm on silicon wafer were chemical-mechanical polished at different down pressures and platen speeds to produce different surface roughness. The surface roughness measurements were performed by an atomic force microscope (DI D3100). Results show that the quality of surface finish (R a value) is determined by the combined effects of down pressures and platen speeds. An optimal polishing condition is, then, possible for selecting the down pressures and platen speeds.

Produced water treatment methods for SAGD

Energy Technology Data Exchange (ETDEWEB)

Minnich, K. [Veolia Water Solutions and Technologies, Mississauga, ON (Canada)

2008-07-01

Produced water treatment methods for steam assisted gravity drainage (SAGD) processes were presented. Lime softening is used to remove sludge before weak acid cation processes. However, the process is not reliable in cold climates, and disposal of the sludge is now posing environmental problems in Alberta. High pH MVC evaporation processes use sodium hydroxide (NaOH) additions to prevent silica scaling. However the process produces silica wastes that are difficult to dispose of. The sorption slurry process was designed to reduce the use of caustic soda and develop a cost-effective method of disposing evaporator concentrates. The method produces 98 per cent steam quality for SAGD injection. Silica is sorbed onto crystals in order to prevent silica scaling. The evaporator concentrate from the process is suitable for on- and off-site deep well disposal. The ceramic membrane process was designed to reduce the consumption of chemicals and improve the reliability of water treatment processes. The ion exchange desilication process uses 80 per cent less power and produces 80 per cent fewer CO{sub 2} emissions than MVC evaporators. A comparative operating cost evaluation of various electric supply configurations and produced water treatment processes was also included, as well as an analysis of produced water chemistry. tabs., figs.

First-Principles Calculations for Chemical Reaction between Sodium Diethyldithiocarbamate and Transition-Metal (Cr) atom to Produce Cr(DDC)3 and Cr(DDC)2ODDC

Science.gov (United States)

Setiyanto, Henry; Muhida, Rifki; Kishi, Tomoya; Rempillo, Ofelia; Rahman, Mahmudur; Dipojono, Hermawan Kresno; Di\\ {n}o, Wilson Agerico; Matsumoto, Shigeno; Kasai, Hideaki

2006-10-01

We investigate the chemical reaction between a Cr transition-metal atom and sodium diethyldithiocarbamate (NaDDC), a complexing agent used to detect and extract Cr in human blood samples. Using density-functional-theory-based calculations, we determine their stable structures of Cr(DDC)2ODDC and Cr(DDC)3 complexes and obtain their dissociation energies. We found dissociation energies of -10.66 and -3.24 eV for Cr(DDC)2ODDC and Cr(DDC)3 complexes, respectively. Hence, on the basis of dissociation energies, we have verified that the reaction of NaDDC with Cr produces Cr(DDC)2ODDC as a major product.

Chemical equilibrium of glycerol carbonate synthesis from glycerol

International Nuclear Information System (INIS)

Li Jiabo; Wang Tao

2011-01-01

Research highlights: → Transesterification of glycerol with cyclic carbonates or alkyl carbonates is thermodynamically favourable for the preparation of glycerol carbonate from glycerol. → The reaction of glycerol and carbon dioxide is thermodynamically limited. → High temperature and low pressure is favourable to the reaction of glycerol and urea. → Increasing temperature can increase the chemical equilibrium constant for the reaction of glycerol and dimethyl carbonate. → For the reaction of glycerol and ethylene carbonate, increasing temperature can decrease the chemical equilibrium constant. - Abstract: In this paper, the chemical equilibrium for the glycerol carbonate preparation from glycerol was investigated. The chemical equilibrium constants were calculated for the reactions to produce glycerol carbonate from glycerol. The theoretical calculation was compared with the experimental results for the transesterification of glycerol with dimethyl carbonate. Transesterification of glycerol with cyclic carbonates or alkyl carbonates is thermodynamically favourable for producing glycerol carbonate from glycerol according to the equilibrium constant. Increasing temperature can increase the chemical equilibrium constant for the reaction of glycerol with dimethyl carbonate. For the reaction of glycerol with ethylene carbonate, increasing temperature can decrease the chemical equilibrium constant. The reaction of glycerol with carbon dioxide is thermodynamically limited. High temperature and low pressure are favourable to the reaction of glycerol and urea.

PREDICTION METRICS FOR CHEMICAL DETECTION IN LONG-WAVE INFRARED HYPERSPECTRAL IMAGERY

Energy Technology Data Exchange (ETDEWEB)

Chilton, M.; Walsh, S.J.; Daly, D.S.

2009-01-01

Natural and man-made chemical processes generate gaseous plumes that may be detected by hyperspectral imaging, which produces a matrix of spectra affected by the chemical constituents of the plume, the atmosphere, the bounding background surface and instrument noise. A physics-based model of observed radiance shows that high chemical absorbance and low background emissivity result in a larger chemical signature. Using simulated hyperspectral imagery, this study investigated two metrics which exploited this relationship. The objective was to explore how well the chosen metrics predicted when a chemical would be more easily detected when comparing one background type to another. The two predictor metrics correctly rank ordered the backgrounds for about 94% of the chemicals tested as compared to the background rank orders from Whitened Matched Filtering (a detection algorithm) of the simulated spectra. These results suggest that the metrics provide a reasonable summary of how the background emissivity and chemical absorbance interact to produce the at-sensor chemical signal. This study suggests that similarly effective predictors that account for more general physical conditions may be derived.

Composition of the sheath produced by the green alga Chlorella sorokiniana.

Science.gov (United States)

Watanabe, K; Imase, M; Sasaki, K; Ohmura, N; Saiki, H; Tanaka, H

2006-05-01

To investigate the chemical characterization of the mucilage sheath produced by Chlorella sorokiniana. Algal mucilage sheath was hydrolysed with NaOH, containing EDTA. The purity of the hydrolysed sheath was determined by an ATP assay. The composition of polysaccharide in the sheath was investigated by high-performance anion-exchange chromatography with pulsed amperometric detection. Sucrose, galacturonic acid, xylitol, inositol, ribose, mannose, arabinose, galactose, rhamnose and fructose were detected in the sheath as sugar components. Magnesium was detected in the sheath as a divalent cation using inductively coupled argon plasma. The sheath matrix also contained protein. It appears that the sheath is composed of sugars and metals. Mucilage sheath contains many kinds of saccharides that are produced as photosynthetic metabolites and divalent cations that are contained in the culture medium. This is the first report on chemical characterization of the sheath matrix produced by C. sorokiniana.

Photomixotrophic chemical production in cyanobacteria.

Science.gov (United States)

Matson, Morgan M; Atsumi, Shota

2018-04-01

The current global dependence on fossil fuels for both energy and chemical production has spurred concerns regarding long-term resource security and environmental detriments resulting from increased CO 2 levels. Through the installation of exogenous metabolic pathways, engineered cyanobacteria strains can directly fix CO 2 into industrially relevant chemicals currently produced from petroleum. This review highlights some of the studies that have successfully implemented photomixotrophic conditions to increase cyanobacterial chemical production. Supplementation with fixed carbon sources provides additional carbon building blocks and energy to enhance production and occasionally aid in growth. Photomixotrophic production has increased titers up to 5-fold over traditional autotrophic conditions, demonstrating promising applications for future commercialization. Copyright © 2017 Elsevier Ltd. All rights reserved.

Method of producing a carbon coated ceramic membrane and associated product

Science.gov (United States)

Liu, Paul K. T.; Gallaher, George R.; Wu, Jeffrey C. S.

1993-01-01

A method of producing a carbon coated ceramic membrane including passing a selected hydrocarbon vapor through a ceramic membrane and controlling ceramic membrane exposure temperature and ceramic membrane exposure time. The method produces a carbon coated ceramic membrane of reduced pore size and modified surface properties having increased chemical, thermal and hydrothermal stability over an uncoated ceramic membrane.

Electron Beam Treatment of Toxic Chemicals

International Nuclear Information System (INIS)

Jung, In Ha; Lee, Myun Joo; Lee, Oh Mi; Kim, Tae Hoon

2011-01-01

Polychlorinated biphenyls (PCBs) were commercially produced from 1920s as complex mixtures containing multiple isomers for a variety of applications. They are very toxic, chemically stable and resist microbial, photochemical, chemical, and thermal degradation. The public, legal, and scientific concerns about PCBs arose from research indicating they were environmental contaminants that had a potential to adversely impact the environment, and, therefore, were undesirable as commercial products. Eventually, most producers reduced or stopped production of PCBs in the 1970s. Stockholm convention on POPs (Persistent Organic Pollutants), which was effective on May 2004 and 151 nations including Korea were joined on June 2005, asked to dispose of PCBs by 2028 with environmental friendly methods. Korean government also has declared to perform by 2015. According to the Environmental law of Korea, over 2 ppm of PCBs has to be decomposed by legal methods of incineration and thermal destruction. But those are inapplicable owing to the environmental groups. KAERI(Korea Atomic Energy Research Institute) has recently developed a remarkable technology for radiation treatment of toxic chemicals including chlorides using an electron beam accelerator

Popular Science Articles for Chemistry Teaching

Directory of Open Access Journals (Sweden)

Ketevan Kupatadze

2017-07-01

Full Text Available The presented paper reviews popular science articles (these articles are published in online magazine “The Teacher” as one of the methods of chemistry teaching. It describes which didactic principles they are in line with and how this type of articles can be used in order to kindle the interest of pupils, students and generally, the readers of other specialties, in chemistry.  The articles review the main topics of inorganic/organic chemistry, biochemistry and ecological chemistry in a simple and entertaining manner. A part of the articles is about "household" chemistry. Chemical topics are related to poetry, literature, history of chemistry or simply, to fun news. The paper delineates the structure of popular science articles and the features of engaging students. It also reviews the teachers' and students' interview results about the usage of popular science articles in chemistry teaching process. The aforementioned pedagogical study revealed that the popular science articles contain useful information not only for the students of other specialties, but also for future biologists and ecologists (having chemistry as a mandatory subject at their universities. The articles are effectively used by teachers on chemistry lessons to kindle students' interest in this subject. DOI: http://dx.doi.org/10.17807/orbital.v9i3.960 

Effects produced by nuclear radiation in powdery milk

International Nuclear Information System (INIS)

Urena N, F.; Reyes G, A.

1999-01-01

The objective of this work is to determine the chemical effects produced by the gamma rays and beta particles radiations on the powdery milk. This work treats on the Pre-dose analysis, sampling radiating, electron spin resonance, acidity, proteins, aminoacids, lactose, fatty acids, peroxides, as well as its experimental results. (Author)

Relative Configuration of Natural Products Using NMR Chemical Shifts

Science.gov (United States)

By comparing calculated with experimental NMR chemical shifts, we were able to determine the relative configurations of three monoterpene diastereomers produced by the walkingstick Anisomorpha buprestoides. The combined RMSDs of both 1H and 13C quantum chemically calculated shifts were able to predi...

Hippocampal NPY gene transfer attenuates seizures without affecting epilepsy-induced impairment of LTP

DEFF Research Database (Denmark)

Sørensen, Andreas T; Nikitidou, Litsa; Ledri, Marco

2009-01-01

(TLE). However, our previous studies show that recombinant adeno-associated viral (rAAV)-NPY treatment in naive rats attenuates long-term potentiation (LTP) and transiently impairs hippocampal learning process, indicating that negative effect on memory function could be a potential side effect of NPY...... is significantly attenuated in vitro. Importantly, transgene NPY overexpression has no effect on short-term synaptic plasticity, and does not further compromise LTP in kindled animals. These data suggest that epileptic seizure-induced impairment of memory function in the hippocampus may not be further affected...... injected with rAAV-NPY, we show that rapid kindling-induced hippocampal seizures in vivo are effectively suppressed as compared to rAAV-empty injected (control) rats. Six to nine weeks later, basal synaptic transmission and short-term synaptic plasticity are unchanged after rapid kindling, while LTP...

Nuclear and chemical data

Energy Technology Data Exchange (ETDEWEB)

De Regge, P.

1978-12-15

The neutron fission yield and other nuclear and chemical data of interest to the nuclear applications of mass spectrometry (mainly in the field of burnup determination) are examined. The performance of those determinations and the achievable accuracy should match the needs of the users of the data produced. 3 figures, 2 tables. (RWR)

Pharmaceutical proteins produced in plant bioreactor in recent years ...

African Journals Online (AJOL)

Plant bioreactor, also called molecular farming, has enormous potential to produce recombinant proteins infinitely. Products expressed in plants have natural physico-chemical properties and bioactivities. Plant bioreactor could be a safe, economic and convenient production system, and can been widely applied in ...

Organic Pollutants in Shale Gas Flowback and Produced Waters

NARCIS (Netherlands)

Butkovskyi, Andrii; Bruning, Harry; Kools, Stefan A.E.; Rijnaarts, Huub H.M.; Wezel, van Annemarie P.

2017-01-01

Organic contaminants in shale gas flowback and produced water (FPW) are traditionally expressed as total organic carbon (TOC) or chemical oxygen demand (COD), though these parameters do not provide information on the toxicity and environmental fate of individual components. This review addresses

Electric Dipole Theory of Chemical Synaptic Transmission

Science.gov (United States)

Wei, Ling Y.

1968-01-01

In this paper we propose that chemicals such as acetylcholine are electric dipoles which when oriented and arranged in a large array could produce an electric field strong enough to drive positive ions over the junction barrier of the post-synaptic membrane and thus initiate excitation or produce depolarization. This theory is able to explain a great number of facts such as cleft size, synaptic delay, nonregeneration, subthreshold integration, facilitation with repetition, and the calcium and magnesium effects. It also shows why and how acetylcholine could act as excitatory or inhibitory transmitters under different circumstances. Our conclusion is that the nature of synaptic transmission is essentially electrical, be it mediated by electrical or chemical transmitters. PMID:4296121

Selective chemical detection by energy modulation of sensors

Science.gov (United States)

Stetter, J.R.; Otagawa, T.

1985-05-20

A portable instrument for use in the field in detecting, identifying, and quantifying a component of a sampled fluid includes a sensor which chemically reacts with the component of interest or a derivative thereof, an electrical heating filament for heating the sample before it is applied to the sensor, and modulating means for continuously varying the temperature of the filament (and hence the reaction rate) between two values sufficient to produce the chemical reaction. In response to this thermal modulation, the sensor produces a modulated output signal, the modulation of which is a function of the activation energy of the chemical reaction, which activation energy is specific to the particular component of interest and its concentration. Microprocessor means compares the modulated output signal with standard responses for a plurality of components to identify and quantify the particular component of interest. 4 figs.

Chemical sensors

International Nuclear Information System (INIS)

Hubbard, C.W.; Gordon, R.L.

1987-05-01

The revolution in analytical chemistry promised by recent developments in the field of chemical sensors has potential for significant positive impact on both research and production activities conducted by and for the Department of Energy. Analyses which were, in the past, performed only with a roomful of expensive equipment can now be performed with miniature solid-state electronic devices or small optical probes. Progress in the development of chemical sensors has been rapid, and the field is currently growing at a great rate. In accordance, Pacific Northwest Laboratory initiated a survey of recent literature so that contributors to active programs in research on analytical methods could be made aware of principles and applications of this new technology. This report presents the results of that survey. The sensors discussed here are divided into three types: micro solid-state devices, optical sensors, and piezoelectric crystal devices. The report is divided into three corresponding sections. The first section, ''Micro Solid-State Devices,'' discusses the design, operation, and application of electronic sensors that are produced in much the same way as standard solid-state electronic devices. The second section, ''Optrodes,'' covers the design and operation of chemical sensors that use fiber optics to detect chemically induced changes in optical properties. The final section, ''Piezoelectric Crystal Detectors,'' discusses two types of chemical sensors that depend on the changes in the properties of an oscillating piezoelectric crystal to detect the presence of certain materials. Advantages and disadvantages of each type of sensor are summarized in each section

Processes for converting biomass-derived feedstocks to chemicals and liquid fuels

Science.gov (United States)

Held, Andrew; Woods, Elizabeth; Cortright, Randy; Gray, Matthew

2018-04-17

The present invention provides processes, methods, and systems for converting biomass-derived feedstocks to liquid fuels and chemicals. The method generally includes the reaction of a hydrolysate from a biomass deconstruction process with hydrogen and a catalyst to produce a reaction product comprising one of more oxygenated compounds. The process also includes reacting the reaction product with a condensation catalyst to produce C.sub.4+ compounds useful as fuels and chemicals.

Processes for converting biomass-derived feedstocks to chemicals and liquid fuels

Science.gov (United States)

Held, Andrew; Woods, Elizabeth; Cortright, Randy; Gray, Matthew

2017-05-23

The present invention provides processes, methods, and systems for converting biomass-derived feedstocks to liquid fuels and chemicals. The method generally includes the reaction of a hydrolysate from a biomass deconstruction process with hydrogen and a catalyst to produce a reaction product comprising one of more oxygenated compounds. The process also includes reacting the reaction product with a condensation catalyst to produce C.sub.4+ compounds useful as fuels and chemicals.

Production of chemicals and fuels from biomass

Science.gov (United States)

Qiao, Ming; Woods, Elizabeth; Myren, Paul; Cortright, Randy; Kania, John

2018-01-23

Methods, reactor systems, and catalysts are provided for converting in a continuous process biomass to fuels and chemicals, including methods of converting the water insoluble components of biomass, such as hemicellulose, cellulose and lignin, to volatile C.sub.2+O.sub.1-2 oxygenates, such as alcohols, ketones, cyclic ethers, esters, carboxylic acids, aldehydes, and mixtures thereof. In certain applications, the volatile C.sub.2+O.sub.1-2 oxygenates can be collected and used as a final chemical product, or used in downstream processes to produce liquid fuels, chemicals and other products.

Triggers of Violence in New Religious Movements

Science.gov (United States)

2012-12-01

71Brandon M. Stickney, All-American Monster: The Unauthorized Biography of Timothy McVeigh (New York: Prometheus Books, 1996), Kindle edition, 1503...and the one who was to rebuild the temple in Jerusalem just as Solomon had after his father’s death.85 Infighting between the two continued in... Biography of Timothy McVeigh. Amherst, NY: Prometheus Books, 1996. Kindle Edition. Toft, Monica, Daniel Philpott, and Timothy Shah. God’s Century. New

Quantum chemical calculations of using density functional theory ...

Indian Academy of Sciences (India)

K RACKESH JAWAHER

2018-02-15

Feb 15, 2018 ... Quantum chemical calculations have been employed to study the molecular effects produced by. Cr2O3/SnO2 optimised structure. ... are exploited in solar cells [2], high-capacity lithium– storage [3], solid-state chemical ..... bond distance of metal–oxygen is positively (0.5 Е) deviated to oxygen–oxygen ...

Optimization of physico-chemical and nutritional parameters for ...

African Journals Online (AJOL)

Optimization of physico-chemical and nutritional parameters for pullulan production by a mutant of thermotolerant Aureobasidium pullulans, in fed batch ... minutes, having killing rate of 70% level, produced 6 g l-1 higher pullulan as compared to the wild type without loosing thermotolerant and non-melanin producing ability.

Polyamic Acid Nanofibers Produced by Needleless Electrospinning

Directory of Open Access Journals (Sweden)

Oldrich Jirsak

2010-01-01

Full Text Available The polyimide precursor (polyamic acid produced of 4,4′-oxydiphthalic anhydride and 4,4′-oxydianiline was electrospun using needleless electrospinning method. Nonwoven layers consisting of submicron fibers with diameters in the range about 143–470 nm on the polypropylene spunbond supporting web were produced. Filtration properties of these nanofiber layers on the highly permeable polypropylene support—namely filtration effectivity and pressure drop—were evaluated. Consequently, these polyamic acid fibers were heated to receive polyimide nanofibers. The imidization process has been studied using IR spectroscopy. Some comparisons with the chemically identical polyimide prepared as the film were made.

Development of a chemically defined platform fed-batch culture media for monoclonal antibody-producing CHO cell lines with optimized choline content.

Science.gov (United States)

Kuwae, Shinobu; Miyakawa, Ichiko; Doi, Tomohiro

2018-01-11

A chemically defined platform basal medium and feed media were developed using a single Chinese hamster ovary (CHO) cell line that produces a monoclonal antibody (mAb). Cell line A, which showed a peak viable cell density of 5.9 × 10 6  cells/mL and a final mAb titer of 0.5 g/L in batch culture, was selected for the platform media development. Stoichiometrically balanced feed media were developed using glucose as an indicator of cell metabolism to determine the feed rates of all other nutrients. A fed-batch culture of cell line A using the platform fed-batch medium yielded a 6.4 g/L mAb titer, which was 12-fold higher than that of the batch culture. To examine the applicability of the platform basal medium and feed media, three other cell lines (A16, B, and C) that produce mAbs were cultured using the platform fed-batch medium, and they yielded mAb titers of 8.4, 3.3, and 6.2 g/L, respectively. The peak viable cell densities of the three cell lines ranged from 1.3 × 10 7 to 1.8 × 10 7  cells/mL. These results show that the nutritionally balanced fed-batch medium and feeds worked well for other cell lines. During the medium development, we found that choline limitation caused a lower cell viability, a lower mAb titer, a higher mAb aggregate content, and a higher mannose-5 content. The optimal choline chloride to glucose ratio for the CHO cell fed-batch culture was determined. Our platform basal medium and feed media will shorten the medium-development time for mAb-producing cell lines.

Chemical defence and toxins of plants

OpenAIRE

Yamane, H.; Konno, K.; Sabelis, M.; Takabayashi, J.; Sassa, T.; Oikawa, H.; Mander, L.; Lui, H.W.

2010-01-01

Higher plants protect themselves by producing a variety of secondary metabolites and proteins that are involved in defense against herbivores as well as microbial pathogens. Concerning microbial pathogenesis in plants, in many cases, it is known that phytotoxins that are produced by plant pathogens play an important role in disease development causing chlorosis, necrosis, or wilting. This chapter mainly focuses on the chemical structures, distribution, and biosynthesis of defense-related natu...

Chemical properties of mendelevium

International Nuclear Information System (INIS)

Hulet, E.K.

1980-01-01

The isotope 256 Md is nearly always employed for chemical studies of this element. This nuclide can be made by bombardment of fractions of a microgram of 254 Es with intense alpha-particle beams which will produce about 10 6 atoms of 256 Md with a half-life of 77 minutes. Even with the most intense ion beams and the largest available quantities of target isotope, about 10 6 atoms at a time is all the Md that can be produced for chemical studies. This lack of sufficient sample size coupled with the very short lifetimes of the few atoms produced has severly restricted the gathering and broadening of our knowledge concerning the properties of Md and the heavier elements. To illustrate, the literature contains a mere eleven references to the chemical studies of Md, and none of these deal with bulk properties associated with element found in solid phases. Some of these findings are: Md was found to be more volatile than other actinide metals which lead to the belief that it is divalent in the metallic state; separation of Md from the other actinides can be accomplished either by reduction of Md to the divalent state or by chromatographic separations with Md remaining in the tripositive state; extraction of Md with bis(2-ethylhexyl)phosphoric acid is much poorer than the extraction of the neighboring tripositive actinides; attempts to oxidize Md wih sodium bismuthate failed to show any evidence of Md 4+ ; standard reduction potential of Md 3+ was found to be close to -0.1 volt; Md 3+ can be reduced to Md(Hg) by sodium amalgams and by electrolysis; the electrochemical behavior of Md is very similar to that of Fm and can be summarized in the equation, Md 2+ + 2e - = Md(Hg), and E 0 = 1.5 V

Occupational chemical exposures in artificial organic fiber industries

Energy Technology Data Exchange (ETDEWEB)

Guirguis, S S; Cohen, M B

1984-05-01

This review discusses artificial organic fibers that are produced from materials of natural origin such as rayons, cellulose triacetates and proteins; or made from polymerised chemicals such as polyamides, polyesters, polyvinyls, modacrylics, carbon fibers, polyolefins, polyurethane and polytetrafluoroethylene. Chemicals involved include monomers, solvents, flame retardants, pigments and other additives. Occupational exposure to chemicals in the production stages are discussed and also the potential health hazards involved are reviewed. Current exposure levels, engineering controls and work practices for some of the chemicals used in the Ontario artificial fiber industry are discussed. Recommendations are made for areas that need further study and/or investigation.

Chemical analysis and base-promoted hydrolysis of locally ...

African Journals Online (AJOL)

Abstract. The study was on the chemical analysis and base- promoted hydrolysis of extracted shea nut fat. The local method of extraction of the shea nut oil was employed in comparison with literature report. A simple cold-process alkali hydrolysis of the shea nut oil was used in producing the soap. The chemical analysis of ...

Chemical Reactions: What Understanding Do Students with Blindness Develop?

Science.gov (United States)

Lewis, Amy L. Micklos; Bodner, George M.

2013-01-01

This study examined the understanding of chemical equations developed by three students with blindness who were enrolled in the same secondary-school chemistry class. The students were interviewed while interpreting and balancing chemical equations. During the course of these interviews, the students produced diagrams using Braille symbols that…

Radionuclides in produced water from Norwegian oil and gas installations - concentrations and bioavailability

International Nuclear Information System (INIS)

Eriksen, D.Oe.; Sidhu, R.; Stralberg, E.; Iden, K.I.; Hylland, K.; Ruus, A.; Roeyset, O.; Berntssen, M.H.G.; Rye, H.

2006-01-01

Substantial amounts of produced water, containing elevated levels of radionuclides (mainly 226 Ra and 228 Ra) are discharged to the sea as a result of oil and gas production on the Norwegian Continental Shelf. So far no study has assessed the potential radiological effects on marine biota in connection with radionuclide discharges to the North Sea. The main objective of the project is to establish radiological safe discharge limits for radium, lead and polonium associated with other components in produced water from oil and gas installations on the Norwegian continental shelf. This study reports results indicating that the presence of added chemicals such as scale inhibitors in produced water has a marked influence on the formation of radium and barium sulphates when produced water is mixed with sea water. Thus, the mobility and bioavailability of radium (and barium) will be larger than anticipated. Also, the bioavailability of food-borne radium is shown to increase due to presence of such chemicals. (author)

Emergency management of chemical weapons injuries.

Science.gov (United States)

Anderson, Peter D

2012-02-01

The potential for chemical weapons to be used in terrorism is a real possibility. Classes of chemical weapons include nerve agents, vesicants (blister agents), choking agents, incapacitating agents, riot control agents, blood agents, and toxic industrial chemicals. The nerve agents work by blocking the actions of acetylcholinesterase leading to a cholinergic syndrome. Nerve agents include sarin, tabun, VX, cyclosarin, and soman. The vesicants include sulfur mustard and lewisite. The vesicants produce blisters and also damage the upper airways. Choking agents include phosgene and chlorine gas. Choking agents cause pulmonary edema. Incapacitating agents include fentanyl and its derivatives and adamsite. Riot control agents include Mace and pepper spray. Blood agents include cyanide. The mechanism of toxicity for cyanide is blocking oxidative phosphorylation. Toxic industrial chemicals include agents such as formaldehyde, hydrofluoric acid, and ammonia.

Integrated chemical plants at the pulp mill

Energy Technology Data Exchange (ETDEWEB)

Ehtonen, P.; Hurme, M.; Jaervelaeinen, M.

1995-12-31

The goal of this paper is to present how the chemical plants can be integrated to the pulp mill. The integration renders possible to balance the chemical consumptions. The total mass balance of a pulp mill with the incoming fuel material and the outgoing waste and flue gases are discussed. The balance figures are presented for the chemicals of the modern fibre line, which will produce fully bleached softwood pulp with an improved effluent quality. The main benefits are lower chemical and transportation costs. The principal over-all plant process block diagrams and process descriptions are presented. The presented info system provides real time information on process and production status at overall mill and department levels. (author)

Quality evaluation of yoghurt brands produced in Makurdi metropolis ...

African Journals Online (AJOL)

In this study, three yoghurt brands Tito yoghurt, Tito probiotic and Final yoghurt produced in Makurdi metropolis were randomly collected in different locations of Makurdi metropolis and subjected to sensory, chemical and microbiological quality analyses. Results on sensory quality attributes showed that Tito Yoghurt scored ...

Non-microcystin producing Microcystis wesenbergii (Komarek) Komarek (Cyanobacteria) representing a main waterbloom-forming species in Chinese waters

International Nuclear Information System (INIS)

Xu Yao; Wu Zhongxing; Yu Boshi; Peng Xin; Yu Gongliang; Wei Zhihong; Wang Guoxiang; Li Renhui

2008-01-01

It is well known that several morphospecies of Microcystis, such as Microcystis aeruginosa (Kuetzing) Lemmermann and Microcystis viridis (A. Brown) Lemmermann can produce hepatotoxic microcystins. However, previous studies gave contradictory conclusions about microcystin production of Microcystis wesenbergii (Komarek) Komarek. In the present study, ten Microcystis morphospecies were identified in waterblooms of seven Chinese waterbodies, and Microcystis wesenbergii was shown as the dominant species in these waters. More than 250 single colonies of M. wesenbergii were chosen, under morphological identification, to examine whether M. wesenbergii produce hepatotoxic microcystin by using multiplex PCR for molecular detection of a region (mcyA) of microcystin synthesis genes, and chemical analyses of microcystin content by ELISA and HPLC for 21 isolated strains of M. wesenbergii from these waters were also performed. Both molecular and chemical methods demonstrated that M. wesenbergii from Chinese waters did not produce microcystin. - Both molecular and chemical methods demonstrated that Microcystis wesenbergii was not a microcystin producer in Chinese waters

Genomic and functional features of the biosurfactant producing Bacillus sp. AM13.

Science.gov (United States)

Shaligram, Shraddha; Kumbhare, Shreyas V; Dhotre, Dhiraj P; Muddeshwar, Manohar G; Kapley, Atya; Joseph, Neetha; Purohit, Hemant P; Shouche, Yogesh S; Pawar, Shrikant P

2016-09-01

Genomic studies provide deeper insights into secondary metabolites produced by diverse bacterial communities, residing in various environmental niches. This study aims to understand the potential of a biosurfactant producing Bacillus sp. AM13, isolated from soil. An integrated approach of genomic and chemical analysis was employed to characterize the antibacterial lipopeptide produced by the strain AM13. Genome analysis revealed that strain AM13 harbors a nonribosomal peptide synthetase (NRPS) cluster; highly similar with known biosynthetic gene clusters from surfactin family: lichenysin (85 %) and surfactin (78 %). These findings were substantiated with supplementary experiments of oil displacement assay and surface tension measurements, confirming the biosurfactant production. Further investigation using LCMS approach exhibited similarity of the biomolecule with biosurfactants of the surfactin family. Our consolidated effort of functional genomics provided chemical as well as genetic leads for understanding the biochemical characteristics of the bioactive compound.

Polyamic Acid Nanofibers Produced by Needleless Electro spinning

International Nuclear Information System (INIS)

Jirsak, O.; Sanetrnik, F.; Hruza, J.; Chaloupek, J.; Sysel, P.

2010-01-01

The polyimide precursor (polyamic acid) produced of 4,4'-oxydiphthalic anhydride and 4,4'-oxydianiline was electrospun using needleless electrospinning method. Nonwoven layers consisting of submicron fibers with diameters in the range about 143-470 nm on the polypropylene spunbond supporting web were produced. Filtration properties of these nanofiber layers on the highly permeable polypropylene support namely filtration effectivity and pressure drop were evaluated. Consequently, these polyamic acid fibers were heated to receive polyimide nanofibers. The imidization process has been studied using IR spectroscopy. Some comparisons with the chemically identical polyimide prepared as the film were made.

Production of chemicals and fuels from biomass

Energy Technology Data Exchange (ETDEWEB)

Woods, Elizabeth; Qiao, Ming; Myren, Paul; Cortright, Randy D.; Kania, John

2015-12-15

Described are methods, reactor systems, and catalysts for converting biomass to fuels and chemicals in a batch and/or continuous process. The process generally involves the conversion of water insoluble components of biomass, such as hemicellulose, cellulose and lignin, to volatile C.sub.2+O.sub.1-2 oxygenates, such as alcohols, ketones, cyclic ethers, esters, carboxylic acids, aldehydes, and mixtures thereof. In certain applications, the volatile C.sub.2+O.sub.1-2 oxygenates can be collected and used as a final chemical product, or used in downstream processes to produce liquid fuels, chemicals and other products.

The biorefinery concept: Using biomass instead of oil for producing energy and chemicals

International Nuclear Information System (INIS)

Cherubini, Francesco

2010-01-01

A great fraction of worldwide energy carriers and material products come from fossil fuel refinery. Because of the on-going price increase of fossil resources, their uncertain availability, and their environmental concerns, the feasibility of oil exploitation is predicted to decrease in the near future. Therefore, alternative solutions able to mitigate climate change and reduce the consumption of fossil fuels should be promoted. The replacement of oil with biomass as raw material for fuel and chemical production is an interesting option and is the driving force for the development of biorefinery complexes. In biorefinery, almost all the types of biomass feedstocks can be converted to different classes of biofuels and biochemicals through jointly applied conversion technologies. This paper provides a description of the emerging biorefinery concept, in comparison with the current oil refinery. The focus is on the state of the art in biofuel and biochemical production, as well as discussion of the most important biomass feedstocks, conversion technologies and final products. Through the integration of green chemistry into biorefineries, and the use of low environmental impact technologies, future sustainable production chains of biofuels and high value chemicals from biomass can be established. The aim of this bio-industry is to be competitive in the market and lead to the progressive replacement of oil refinery products. (author)

Hybrid Combustion-Gasification Chemical Looping

Energy Technology Data Exchange (ETDEWEB)

Herbert Andrus; Gregory Burns; John Chiu; Gregory Lijedahl; Peter Stromberg; Paul Thibeault

2009-01-07

For the past several years Alstom Power Inc. (Alstom), a leading world-wide power system manufacturer and supplier, has been in the initial stages of developing an entirely new, ultra-clean, low cost, high efficiency power plant for the global power market. This new power plant concept is based on a hybrid combustion-gasification process utilizing high temperature chemical and thermal looping technology The process consists of the oxidation, reduction, carbonation, and calcination of calcium-based compounds, which chemically react with coal, biomass, or opportunity fuels in two chemical loops and one thermal loop. The chemical and thermal looping technology can be alternatively configured as (i) a combustion-based steam power plant with CO{sub 2} capture, (ii) a hybrid combustion-gasification process producing a syngas for gas turbines or fuel cells, or (iii) an integrated hybrid combustion-gasification process producing hydrogen for gas turbines, fuel cells or other hydrogen based applications while also producing a separate stream of CO{sub 2} for use or sequestration. In its most advanced configuration, this new concept offers the promise to become the technology link from today's Rankine cycle steam power plants to tomorrow's advanced energy plants. The objective of this work is to develop and verify the high temperature chemical and thermal looping process concept at a small-scale pilot facility in order to enable AL to design, construct and demonstrate a pre-commercial, prototype version of this advanced system. In support of this objective, Alstom and DOE started a multi-year program, under this contract. Before the contract started, in a preliminary phase (Phase 0) Alstom funded and built the required small-scale pilot facility (Process Development Unit, PDU) at its Power Plant Laboratories in Windsor, Connecticut. Construction was completed in calendar year 2003. The objective for Phase I was to develop the indirect combustion loop with CO{sub 2

Consequence and Resilience Modeling for Chemical Supply Chains

Science.gov (United States)

Stamber, Kevin L.; Vugrin, Eric D.; Ehlen, Mark A.; Sun, Amy C.; Warren, Drake E.; Welk, Margaret E.

2011-01-01

The U.S. chemical sector produces more than 70,000 chemicals that are essential material inputs to critical infrastructure systems, such as the energy, public health, and food and agriculture sectors. Disruptions to the chemical sector can potentially cascade to other dependent sectors, resulting in serious national consequences. To address this concern, the U.S. Department of Homeland Security (DHS) tasked Sandia National Laboratories to develop a predictive consequence modeling and simulation capability for global chemical supply chains. This paper describes that capability , which includes a dynamic supply chain simulation platform called N_ABLE(tm). The paper also presents results from a case study that simulates the consequences of a Gulf Coast hurricane on selected segments of the U.S. chemical sector. The case study identified consequences that include impacted chemical facilities, cascading impacts to other parts of the chemical sector. and estimates of the lengths of chemical shortages and recovery . Overall. these simulation results can DHS prepare for and respond to actual disruptions.

Chemical etching and polishing of InP

International Nuclear Information System (INIS)

Kurth, E.; Reif, A.; Gottschalch, V.; Finster, J.; Butter, E.

1988-01-01

This paper describes possibilities of several chemical preparations for the selective cleaning of InP surfaces. The investigations of the surface states after the chemical treatment were carried out by means of XPS measurements. A pre-etching with (NH 4 ) 2 S 2 O 8 :H 2 SO 4 :H 2 O and a polishing with 1% bromine in methanol produce optically smooth (100)-and (111) P surfaces free of oxides. (author)

The Impact of Electronic Reading Devices on Reading Speed and Comfort in Patients with Decreased Vision

Directory of Open Access Journals (Sweden)

Henry L. Feng

2017-01-01

Full Text Available Background/Aims. To evaluate the impact of back-illuminated and nonilluminated electronic reading devices on reading speed and comfort in patients with decreased vision. Methods. A prospective study involving a convenience sample of 167 patients at a single retina practice from January 2011 to December 2012. Participants were asked to read five different excerpts on five different media in a randomly assigned order. Media included a printed book at 12-point font (12PF, iPad2 at 12PF, iPad2 at 18-point font (18PF, Kindle2 at 12PF, and Kindle2 at 18PF. Reading speed in words per minute (WPM and medium preference were recorded and stratified by visual acuity (VA. Results. Mean reading speeds in WPM: iPad2 at 18PF (217.0, iPad2 at 12PF (209.1, Kindle2 at 18PF (183.3, Kindle2 at 12PF (177.7, and printed book at 12PF (176.8. Reading speed was faster on back-illuminated media compared to nonilluminated media. Text magnification minimized losses in reading performance with worsening patient VA. The majority of participants preferred reading on the iPad2 at 18PF. Conclusions. Back-illuminated devices may increase reading speed and comfort relative to nonilluminated devices and printed text, particularly in patients with decreased VA.

Anticonvulsant activity of Aloe vera leaf extract in acute and chronic models of epilepsy in mice.

Science.gov (United States)

Rathor, Naveen; Arora, Tarun; Manocha, Sachin; Patil, Amol N; Mediratta, Pramod K; Sharma, Krishna K

2014-03-01

The effect of Aloe vera in epilepsy has not yet been explored. This study was done to explore the effect of aqueous extract of Aloe vera leaf powder on three acute and one chronic model of epilepsy. In acute study, aqueous extract of Aloe vera leaf (extract) powder was administered in doses 100, 200 and 400 mg/kg p.o. Dose of 400 mg/kg of Aloe vera leaf extract was chosen for chronic administration. Oxidative stress parameters viz. malondialdehyde (MDA) and reduced glutathione (GSH) were also estimated in brain of kindled animals. In acute study, Aloe vera leaf (extract) powder in a dose-dependent manner significantly decreased duration of tonic hind limb extension in maximal electroshock seizure model, increased seizure threshold current in increasing current electroshock seizure model, and increased latency to onset and decreased duration of clonic convulsion in pentylenetetrazole (PTZ) model as compared with control group. In chronic study, Aloe vera leaf (extract) powder prevented progression of kindling in PTZ-kindled mice. Aloe vera leaf (extract) powder 400 mg/kg p.o. also reduced brain levels of MDA and increased GSH levels as compared to the PTZ-kindled non-treated group. The results of study showed that Aloe vera leaf (extract) powder possessed significant anticonvulsant and anti-oxidant activity. © 2013 Royal Pharmaceutical Society.

Getting the chemicals right: addressing inorganics in sustainability assessments of technologies

DEFF Research Database (Denmark)

Müller, Nienke; Fantke, Peter

sustainability assessments, the toxicity potential of several thousand organic chemicals is included in characterization models within life cycle impact assessment (LCIA). However, many economic production processes involve the use of inorganic chemicals to a large extent, while the related pressure on human...... and environmental health of environmental emissions of these substances is not yet fully understood and not included in any existing LCIA method. In th is presentation, we provide an overview of the relevance of inorganic chemicals and outline possible ways towards incorporating inorganic chemicals in LCIA toxicity......A main goal of sustainability research is to enable a technological development in industry and elsewhere that ensures that what is produced and how it is produced today does not harm the quality of human or environmental health for present and future generations. As part of current environmental...

Titanium compacts produced by the pulvimetallurgical hydride-dehydride method for biomedical applications

International Nuclear Information System (INIS)

Barreiro, M M; Grana, D R; Kokubu, G A; Luppo, M I; Mintzer, S; Vigna, G

2010-01-01

Titanium powder production by the hydride-dehydride method has been developed as a non-expensive process. In this work, commercially pure grade two Ti specimens were hydrogenated. The hydrided material was milled in a planetary mill. The hydrided titanium powder was dehydrided and then sieved to obtain a particle size between 37 and 125 μm in order to compare it with a commercial powder produced by chemical reduction with a particle size lower than 150 μm. Cylindrical green compacts were obtained by uniaxial pressing of the powders at 343 MPa and sintering in vacuum. The powders and the density of sintered compacts were characterized, the oxygen content was measured and in vivo tests were performed in the tibia bones of Wistar rats in order to evaluate their biocompatibility. No differences were observed between the materials which were produced either with powders obtained by the hydride-dehydride method or with commercial powders produced by chemical reduction regarding modifications in compactation, sintering and biological behaviour.

Titanium compacts produced by the pulvimetallurgical hydride-dehydride method for biomedical applications

Energy Technology Data Exchange (ETDEWEB)

Barreiro, M M [Materiales Dentales, Facultad de OdontologIa, Universidad de Buenos Aires, Marcelo T de Alvear 2142 (1122), Buenos Aires (Argentina); Grana, D R; Kokubu, G A [PatologIa I. Escuela de OdontologIa, Facultad de Medicina. Asociacion Odontologica Argentina-Universidad del Salvador, Tucuman 1845 (1050) Buenos Aires (Argentina); Luppo, M I; Mintzer, S; Vigna, G, E-mail: mbarreiro@mater.odon.uba.a, E-mail: dgrana@usal.edu.a, E-mail: luppo@cnea.gov.a, E-mail: vigna@cnea.gov.a [Departamento Materiales, Comision Nacional de Energia Atomica, Gral Paz 1499 (B1650KNA), San MartIn, Buenos Aires (Argentina)

2010-04-15

Titanium powder production by the hydride-dehydride method has been developed as a non-expensive process. In this work, commercially pure grade two Ti specimens were hydrogenated. The hydrided material was milled in a planetary mill. The hydrided titanium powder was dehydrided and then sieved to obtain a particle size between 37 and 125{mu}m in order to compare it with a commercial powder produced by chemical reduction with a particle size lower than 150{mu}m. Cylindrical green compacts were obtained by uniaxial pressing of the powders at 343 MPa and sintering in vacuum. The powders and the density of sintered compacts were characterized, the oxygen content was measured and in vivo tests were performed in the tibia bones of Wistar rats in order to evaluate their biocompatibility. No differences were observed between the materials which were produced either with powders obtained by the hydride-dehydride method or with commercial powders produced by chemical reduction regarding modifications in compactation, sintering and biological behaviour.

The Heck reaction in the production of fine chemicals

NARCIS (Netherlands)

Vries, Johannes G. de

2001-01-01

An overview is given of the use of the Heck reaction for the production of fine chemicals. Five commercial products have been identified that are produced on a scale in excess of 1 ton/year. The herbicide Prosulfuron™ is produced via a Matsuda reaction of 2-sulfonatobenzenediazonium on

Evaluation of the Atmospheric Chemical Entropy Production of Mars

Directory of Open Access Journals (Sweden)

Alfonso Delgado-Bonal

2015-07-01

Full Text Available Thermodynamic disequilibrium is a necessary situation in a system in which complex emergent structures are created and maintained. It is known that most of the chemical disequilibrium, a particular type of thermodynamic disequilibrium, in Earth’s atmosphere is a consequence of life. We have developed a thermochemical model for the Martian atmosphere to analyze the disequilibrium by chemical reactions calculating the entropy production. It follows from the comparison with the Earth atmosphere that the magnitude of the entropy produced by the recombination reaction forming O3 (O + O2 + CO2 ⥦ O3 + CO2 in the atmosphere of the Earth is larger than the entropy produced by the dominant set of chemical reactions considered for Mars, as a consequence of the low density and the poor variety of species of the Martian atmosphere. If disequilibrium is needed to create and maintain self-organizing structures in a system, we conclude that the current Martian atmosphere is unable to support large physico-chemical structures, such as those created on Earth.

Identification of goat milk powder by manufacturer using multiple chemical parameters.

Science.gov (United States)

McLeod, Rebecca J; Prosser, Colin G; Wakefield, Joshua W

2016-02-01

Concentrations of multiple elements and ratios of stable isotopes of carbon and nitrogen were measured and combined to create a chemical fingerprint of production batches of goat whole milk powder (WMP) produced by different manufacturers. Our objectives were to determine whether or not differences exist in the chemical fingerprint among samples of goat WMP produced at different sites, and assess temporal changes in the chemical fingerprint in product manufactured at one site. In total, 58 samples of goat WMP were analyzed by inductively coupled plasma-mass spectrometry as well as isotope ratio mass spectrometry and a suite of 13 elements (Li, Na, Mg, K, Ca, Mn, Cu, Zn, Rb, Sr, Mo, Cs, and Ba), δ(13)C, and δ(15)N selected to create the chemical fingerprint. Differences in the chemical fingerprint of samples between sites and over time were assessed using principal components analysis and canonical analysis of principal coordinates. Differences in the chemical fingerprints of samples between production sites provided a classification success rate (leave-one-out classification) of 98.1%, providing a basis for using the approach to test the authenticity of product manufactured at a site. Within one site, the chemical fingerprint of samples produced at the beginning of the production season differed from those produced in the middle and late season, driven predominantly by lower concentrations of Na, Mg, K, Mn, and Rb, and higher concentrations of Ba and Cu. This observed temporal variability highlights the importance of obtaining samples from throughout the season to ensure a representative chemical fingerprint is obtained for goat WMP from a single manufacturing site. The reconstitution and spray drying of samples from one manufacturer by the other manufacturer enabled the relative influence of the manufacturing process on the chemical fingerprint to be examined. It was found that such reprocessing altered the chemical fingerprint, although the degree of alteration

Selective olfactory attention of a specialised predator to intraspecific chemical signals of its prey.

Science.gov (United States)

Cárdenas, Manuel; Jiroš, Pavel; Pekár, Stano

2012-08-01

Prey-specialised predators have evolved specific cognitive adaptations that increase their prey searching efficiency. In particular, when the prey is social, selection probably favours the use of prey intraspecific chemical signals by predatory arthropods. Using a specialised ant-eating zodariid spider, Zodarion rubidum, which is known to prey on several ant species and possesses capture and venom adaptations more effective on Formicinae ants, we tested its ability to recognise chemical cues produced by several ant species. Using an olfactometer, we tested the response of Z. rubidum towards air with chemical cues from six different ant species: Camponotus ligniperda, Lasius platythorax and Formica rufibarbis (all Formicinae); and Messor structor, Myrmica scabrinodis and Tetramorium caespitum (all Myrmicinae). Z. rubidum was attracted to air carrying chemical cues only from F. rufibarbis and L. platythorax. Then, we identified that the spiders were attracted to airborne cues coming from the F. rufibarbis gaster and Dufour's gland, in particular. Finally, we found that among several synthetic blends, the decyl acetate and undecane mixture produced significant attraction of spiders. These chemicals are produced only by three Formicine genera. Furthermore, we investigated the role of these chemical cues in the communication of F. rufibarbis and found that this blend reduces their movement. This study demonstrates the chemical cognitive capacity of Z. rubidum to locate its ant prey using chemical signals produced by the ants. The innate capacity of Z. rubidum to olfactory detect different ant species is narrow, as it includes only two ant genera, confirming trophic specialisation at lower than subfamily level. The olfactory cue detected by Zodarion spiders is probably a component of the recruitment or trail pheromone.

Calculations of physical and chemical reactions with DNA in aqueous solution from Auger cascades

International Nuclear Information System (INIS)

Wright, H.A.; Hamm, R.N.; Turner, J.E.; Howell, R.W.; Rao, D.V.; Sastry, K.S.R.

1989-01-01

Monte Carlo calculations are performed of the physical and chemical interactions in liquid water by electrons produced during Auger cascades resulting from the decay of various radionuclides. Estimates are also made of the number of direct physical and indirect chemical interactions that would be produced on DNA located near the decay site. 13 refs., 8 figs

Electroplating method for producing ultralow-mass fissionable deposits

International Nuclear Information System (INIS)

Ruddy, F.H.

1989-01-01

A method for producing ultralow-mass fissionable deposits for nuclear reactor dosimetry is described, including the steps of holding a radioactive parent until the radioactive parent reaches secular equilibrium with a daughter isotope, chemically separating the daughter from the parent, electroplating the daughter on a suitable substrate, and holding the electroplated daughter until the daughter decays to the fissionable deposit

Limbic Epileptogenesis in a Mouse Model of Fragile X Syndrome

OpenAIRE

Qiu, Li-Feng; Lu, Ting-Jia; Hu, Xiao-Ling; Yi, Yong-Hong; Liao, Wei-Ping; Xiong, Zhi-Qi

2008-01-01

Fragile X syndrome (FXS), caused by silencing of the Fmr1 gene, is the most common form of inherited mental retardation. Epilepsy is reported to occur in 20?25% of individuals with FXS. However, no overall increased excitability has been reported in Fmr1 knockout (KO) mice, except for increased sensitivity to auditory stimulation. Here, we report that kindling increased the expressions of Fmr1 mRNA and protein in the forebrain of wild-type (WT) mice. Kindling development was dramatically acce...

Radionuclides in produced water from Norwegian oil and gas installations — Concentrations and bioavailability

Science.gov (United States)

Eriksen, D. Ø.; Sidhu, R.; Strålberg, E.; Iden, K. I.; Hylland, K.; Ruus, A.; Røyset, O.; Berntssen, M. H. G.; Rye, H.

2006-01-01

Substantial amounts of produced water, containing elevated levels of radionuclides (mainly 226Ra and 228Ra) are discharged to the sea as a result of oil and gas production on the Norwegian Continental Shelf. So far no study has assessed the potential radiological effects on marine biota in connection with radionuclide discharges to the North Sea. The main objective of the project is to establish radiological safe discharge limits for radium, lead and polonium associated with other components in produced water from oil and gas installations on the Norwegian continental shelf. This study reports results indicating that the presence of added chemicals such as scale inhibitors in produced water has a marked influence on the formation of radium and barium sulphates when produced water is mixed with sea water. Thus, the mobility and bioavailability of radium (and barium) will be larger than anticipated. Also, the bioavailability of food-borne radium is shown to increase due to presence of such chemicals.

Health effects assessment of chemical exposures: ARIES methodology

Energy Technology Data Exchange (ETDEWEB)

Sierra, L; Montero, M.; Rabago, I.; Vidania, R.

1995-07-01

In this work, we present ARIES* update: a system designed in order to facilitate the human health effects assessment produced by accidental release of toxic chemicals. The first version of ARIES was developed in relation to 82/501/EEC Directive about mayor accidents in the chemical industry. So, the first aim was the support of the effects assessment derived for the chemicals included into this directive. From this establishment, it was considered acute exposures for high concentrations. In this report, we present the actual methodology for considering other type of exposures, such as environmental and occupational. Likewise other versions, the methodology comprises two approaches: quantitative and qualitative assessments. Quantitative assessment incorporates the mathematical algorithms useful to evaluate the effects produced by the most important routes of exposure: inhalation, ingestion, eye contact and skin absorption, in a short, medium and long term. It has been included models that realizes an accurate quantification of doses, effects,... and so on, such as simple approaches when the available information is not enough. Qualitative assessment, designed in order to complement or replace the previous one, is incorporated into an informatics system, developed in Clipper. It executes and displays outstanding and important toxicological information of about 100 chemicals. This information comes from ECDIN (Environmental Chemicals Data and Information Network) database through a collaboration with JRC-ISPRA working group. (Author) 24 refs.

Health effects assessment of chemical exposures: ARIES methodology

International Nuclear Information System (INIS)

Sierra, L; Montero, M.; Rabago, I.; Vidania, R.

1995-01-01

In this work, we present ARIES* update: a system designed in order to facilitate the human health effects assessment produced by accidental release of toxic chemicals. The first version of ARIES was developed in relation to 82/501/EEC Directive about mayor accidents in the chemical industry. So, the first aim was the support of the effects assessment derived for the chemicals included into this directive. From this establishment, it was considered acute exposures for high concentrations. In this report, we present the actual methodology for considering other type of exposures, such as environmental and occupational. Likewise other versions, the methodology comprises two approaches: quantitative and qualitative assessments. Quantitative assessment incorporates the mathematical algorithms useful to evaluate the effects produced by the most important routes of exposure: inhalation, ingestion, eye contact and skin absorption, in a short, medium and long term. It has been included models that realizes an accurate quantification of doses, effects,... and so on, such as simple approaches when the available information is not enough. Qualitative assessment, designed in order to complement or replace the previous one, is incorporated into an informatics system, developed in Clipper. It executes and displays outstanding and important toxicological information of about 100 chemicals. This information comes from ECDIN (Environmental Chemicals Data and Information Network) database through a collaboration with JRC-ISPRA working group. (Author) 24 refs

Binderless board and moulded products produced from whole coconut husks

NARCIS (Netherlands)

Dam, van J.E.G.; Snijder, M.H.B.

2002-01-01

A simple and efficient technology has been developed to produce high strength - high density board materials from whole coconut husks, without the addition of chemical binders. The board material has been shown to exhibit excellent properties, which are comparable with or even superior to commercial

Barium in produced water: Is it a toxicological hazard to the marine environment?

International Nuclear Information System (INIS)

Neff, J.M.

1993-01-01

Produced water is a complex aqueous mixture of organic and inorganic chemicals that often is generated in large volumes as a by-product of production of oil and gas. Produced water from offshore oil production platforms sometimes is treated to remove particulate oil and then discharged to the ocean. Barium often is the most abundant inorganic chemical, other than the dominant sea salts, in produced water. Some concern has been expressed that the large amounts of barium discharged to the ocean in produced water may have adverse effects on marine biological communities. The ecological risks associated with discharge to the ocean in produced water may have adverse effects on marine biological communities. The ecological risks associated with discharge to the ocean of barium in produced water were evaluated. Concentrations of barium in produced water from different sources range from less than 1.0 to about 2,000 mg/L, and are inversely correlated with concentrations of sulfate. Concentrations of barium in the ocean usually are in the range of 10 to 20 μg/L; the ocean is undersaturated with respect to barite (BaSO 4 ). During mixing and dilution of a produced water plume in the ocean, barium reacts with the abundant sulfate in seawater and precipitates as barite. Barite is completely nontoxic to marine organisms. Because of the high concentration of sulfate in the ocean, ionic barium can not reach concentrations high enough to be toxic to marine organisms

Features of the Italian National Inventory of Chemical Substances.

Science.gov (United States)

Binetti, R; Marcello, I

1994-01-01

The Italian National Inventory of Chemical Substances (Inventario nazionale delle sostanze chimiche, INSC), a factual data bank on chemical toxicology produced by the Istituto Superiore di Sanità (ISS), consists of a computerized system on existing chemicals developed for routinary and emergency needs. Historical background, current status and future direction of INSC are discussed. The structure and the feature of INSC are briefly examined. Aspects of retrieval of information and the criteria for the inclusion of data and priority selection are also considered.

Comparative experiments on polymer degradation technique of produced water of polymer flooding oilfield

Science.gov (United States)

Chen, Rong; Qi, Mei; Zhang, Guohui; Yi, Chenggao

2018-02-01

The application of polymer flooding technology in oilfields can result in polymer content increased in produced water. This increasing made produced water quality become poor. The efficiency of produced water processing decreased significantly. Processed water quality seriously exceeded criterion’s stipulation. The presence of the polymer in produced water is the main reason for more difficulties in processing of produced water, therefore the polymer degradation technology is a key coefficient in produced water processing for polymer flooding oilfields. We evaluated several physical and chemical polymer degradation methods with the solution of separated water from polymer flooding oilfields and hydrolyzed polyacrylamide. The experiment results can provide a basis for produced water processing technologies application in polymer flooding oilfields.

Effect of thermal, chemical and thermo-chemical pre-treatments to enhance methane production

Energy Technology Data Exchange (ETDEWEB)

Rafique, Rashad; Nizami, Abdul-Sattar; Murphy, Jerry D.; Kiely, Gerard [Department of Civil and Environmental Engineering, University College Cork (Ireland); Poulsen, Tjalfe Gorm [Department of Biotechnology, Chemistry and Environmental Engineering, Aalborg University (Denmark); Asam, Zaki-ul-Zaman [Department of Civil Engineering, National University of Ireland Galway (Ireland)

2010-12-15

The rise in oil price triggered the exploration and enhancement of various renewable energy sources. Producing biogas from organic waste is not only providing a clean sustainable indigenous fuel to the number of on-farm digesters in Europe, but also reducing the ecological and environmental deterioration. The lignocellulosic substrates are not completely biodegraded in anaerobic digesters operating at commercial scale due to their complex physical and chemical structure, which result in meager energy recovery in terms of methane yield. The focus of this study is to investigate the effect of pre-treatments: thermal, thermo-chemical and chemical pre-treatments on the biogas and methane potential of dewatered pig manure. A laboratory scale batch digester is used for these pre-treatments at different temperature range (25 C-150 C). Results showed that thermo-chemical pretreatment has high effect on biogas and methane potential in the temperature range (25-100 C). Maximum enhancement is observed at 70 C with increase of 78% biogas and 60% methane production. Thermal pretreatment also showed enhancement in the temperature range (50-10 C), with maximum enhancement at 100 C having 28% biogas and 25% methane increase. (author)

Phycocyanin extraction in Spirulina produced using agricultural waste

Science.gov (United States)

Taufiqurrahmi, N.; Religia, P.; Mulyani, G.; Suryana, D.; Ichsan; Tanjung, F. A.; Arifin, Y.

2017-06-01

Phycocyanin is a pigment-protein complex synthesized by blue-green microalgae such as Arthrospira (Spirulina) platensis. This pigment is used mainly as natural colouring in food industry. Previous studies have demonstrated the potential health benefits of this natural pigment. The price of phycocyanin is a vital factor that dictates its marketability. The cost of culturing the algae, particularly from the substrate used for growth, is one of the main factors that determine the price of phycocyanin. Another important factor is the growth yield of the algae. In our research, agricultural waste such as charcoal produced from rice husk was utilized for the algae cultivation to replace the synthetic chemicals such as urea and triple superphosphate used the mineral medium. The use of this low cost substrate increases the cell concentration by 60 % during 8 days’ cultivation to reach 0.39 g/l. The phycocyanin extraction was performed using water at the different biomass-to-solvent ratio and shaking rates. The phycocyanin concentration and purity (A615/A280) obtained were 1.2 g/l and 0.3. These values are 40 % and 20 % lower than the value obtained from the algae produced using the synthetic chemicals. Further purification produced the extract purity required for food grade. The biomass-solvent ratio does not significantly affect the extract purity; however, the higher shaking rate during extraction reduces the purity. This finding demonstrates the potential of using rice husk as an alternative substrate to cultivate algae for phycocyanin extraction.

Comparative efficiency of chemical and radiation mutagens on two Cicer arietinum Rhizobial strains

Energy Technology Data Exchange (ETDEWEB)

Khare, A K; Shinde, D A; Nayak, M L [Jawaharlal Nehru Krishi Vishwa Vidyalaya, Indore (India)

1982-03-01

A comparison of efficacy due to chemical and radiation mutagens on morphology, nutritional totipotence and symbiotic character of two Cicer arietinum rhizobia has been made. The mutants produced as a result of radiations (gamma and UV rays) differed from parents in that, the mutant colony size was bigger and gelatinase activity was higher. The mutants were not deficient nutritionally, had wider host range and the size and number of nodules produced were higher. Radiation mutagenic effects were more pronounced than chemical mutagens. The mutants derived from chemicals were not as efficient as radiation mutants although they were better than parents in total nodulation.

Quantitative assessment of chemical artefacts produced by propionylation of histones prior to mass spectrometry analysis.

Science.gov (United States)

Soldi, Monica; Cuomo, Alessandro; Bonaldi, Tiziana

2016-07-01

Histone PTMs play a crucial role in regulating chromatin structure and function, with impact on gene expression. MS is nowadays widely applied to study histone PTMs systematically. Because histones are rich in arginine and lysine, classical shot-gun approaches based on trypsin digestion are typically not employed for histone modifications mapping. Instead, different protocols of chemical derivatization of lysines in combination with trypsin have been implemented to obtain "Arg-C like" digestion products that are more suitable for LC-MS/MS analysis. Although widespread, these strategies have been recently described to cause various side reactions that result in chemical modifications prone to be misinterpreted as native histone marks. These artefacts can also interfere with the quantification process, causing errors in histone PTMs profiling. The work of Paternoster V. et al. is a quantitative assessment of methyl-esterification and other side reactions occurring on histones after chemical derivatization of lysines with propionic anhydride [Proteomics 2016, 16, 2059-2063]. The authors estimate the effect of different solvents, incubation times, and pH on the extent of these side reactions. The results collected indicate that the replacement of methanol with isopropanol or ACN not only blocks methyl-esterification, but also significantly reduces other undesired unspecific reactions. Carefully titrating the pH after propionic anhydride addition is another way to keep methyl-esterification under control. Overall, the authors describe a set of experimental conditions that allow reducing the generation of various artefacts during histone propionylation. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

The evolution of plant chemical defence - new roles for hydroxynitrile glucosides in Lotus japonicus

DEFF Research Database (Denmark)

Knudsen, Camilla

Plants are sessile organisms well-known to produce a vast array of chemical compounds of which many are used in chemical defence against herbivores and pathogens. The biosynthesis of these plant chemical defence compounds poses a considerable risk of self-toxicity for the plant itself. Several...... on hydroxynitrile glucoside metabolism in the legume model plant Lotus japonicus. Lotus japonicus produces both cyanogenic and non-cyanogenic hydroxynitrile glucosides as chemical defence compounds. The cyanogenic glucosides linamarin and lotaustralin are stored in the cell vacuole as inactive glycosides and, upon...... function and evolution. Further, it contributes to our understanding of the formation and role of biosynthetic gene clusters in plant chemical defence. The bifurcation in hydroxynitrile glucoside biosynthesis and catabolism observed in Lotus japonicus makes it a very suitable model system to study...

Characterization of exopolysaccharides produced by three moderately halophilic bacteria belonging to the family Alteromonadaceae.

Science.gov (United States)

Mata, J A; Béjar, V; Bressollier, P; Tallon, R; Urdaci, M C; Quesada, E; Llamas, I

2008-08-01

To study the exopolysaccharides (EPSs) produced by three novel moderately halophilic species belonging to the family Alteromonadaceae to optimize EPS yields, characterize their physical and chemical properties and evaluate possible biotechnological applications for these polymers. EPSs synthesized by Idiomarina fontislapidosi F32(T), Idiomarina ramblicola R22(T) and Alteromonas hispanica F23(T) were collected and analysed under optimum conditions: MY medium supplemented with 7.5% (w/v) salts; 32 degrees C; and 1% (w/v) glucose. Polymers were synthesized mainly during the early stationary growth phase with yields ranging from 1 to 1.5 g l(-1). The Idiomarina species each produced an anionic EPS composed mainly of glucose, mannose and galactose. A. hispanica synthesized an anionic EPS composed mainly of glucose, mannose and xylose. Solutions of all the polymers were low in viscosity and pseudoplastic in their behaviour. They showed emulsifying activity and the capacity to bind some metals. The Alteromonadaceae species studied in this work produced EPSs with physical and chemical properties different from those produced by other halophilic and nonhalophilic bacteria, suggesting that the wide diversity of micro-organisms being encountered nowadays in hypersaline environments offers enormous potential resources for biotechnological applications. We have optimized the EPS production and analysed new biopolymers produced by some recently described, moderately halophilic bacteria. These biopolymers are chemically and physically different from others already in use in biotechnology and offer hopes for new applications, especially in the case of A. hispanica, which may prove to be a viable source of xylo-oligosaccharides.

Chemical-Gene Interactions from ToxCast Bioactivity Data Expands Universe of Literature Network-Based Associations (SOT)

Science.gov (United States)

Characterizing the effects of chemicals in biological systems is often summarized by chemical-gene interactions, which have sparse coverage in the literature. The ToxCast chemical screening program has produced bioactivity data for nearly 2000 chemicals and over 450 gene targets....

Engineering modular polyketide synthases for production of biofuels and industrial chemicals.

Science.gov (United States)

Cai, Wenlong; Zhang, Wenjun

2018-04-01

Polyketide synthases (PKSs) are one of the most profound biosynthetic factories for producing polyketides with diverse structures and biological activities. These enzymes have been historically studied and engineered to make un-natural polyketides for drug discovery, and have also recently been explored for synthesizing biofuels and industrial chemicals due to their versatility and customizability. Here, we review recent advances in the mechanistic understanding and engineering of modular PKSs for producing polyketide-derived chemicals, and provide perspectives on this relatively new application of PKSs. Copyright © 2017 Elsevier Ltd. All rights reserved.

Chemical deposition methods using supercritical fluid solutions

Science.gov (United States)

Sievers, Robert E.; Hansen, Brian N.

1990-01-01

A method for depositing a film of a desired material on a substrate comprises dissolving at least one reagent in a supercritical fluid comprising at least one solvent. Either the reagent is capable of reacting with or is a precursor of a compound capable of reacting with the solvent to form the desired product, or at least one additional reagent is included in the supercritical solution and is capable of reacting with or is a precursor of a compound capable of reacting with the first reagent or with a compound derived from the first reagent to form the desired material. The supercritical solution is expanded to produce a vapor or aerosol and a chemical reaction is induced in the vapor or aerosol so that a film of the desired material resulting from the chemical reaction is deposited on the substrate surface. In an alternate embodiment, the supercritical solution containing at least one reagent is expanded to produce a vapor or aerosol which is then mixed with a gas containing at least one additional reagent. A chemical reaction is induced in the resulting mixture so that a film of the desired material is deposited.

Nanomotor dynamics in a chemically oscillating medium

Energy Technology Data Exchange (ETDEWEB)

Robertson, Bryan, E-mail: bryan.robertson@mail.utoronto.ca; Kapral, Raymond, E-mail: rkapral@chem.utoronto.ca [Chemical Physics Theory Group, Department of Chemistry, University of Toronto, Toronto, Ontario M5S 3H6 (Canada)

2015-04-21

Synthetic nanomotors powered by chemical reactions have potential uses as cargo transport vehicles in both in vivo and in vitro applications. In many situations, motors will have to operate in out-of-equilibrium complex chemically reacting media, which supply fuel to the motors and remove the products they produce. Using molecular simulation and mean-field theory, this paper describes some of the new features that arise when a chemically powered nanomotor, operating through a diffusiophoretic mechanism, moves in an environment that supports an oscillatory chemical reaction network. It is shown how oscillations in the concentrations in chemical species in the environment give rise to oscillatory motor dynamics. More importantly, since the catalytic reactions on the motor that are responsible for its propulsion couple to the bulk phase reaction network, the motor can change its local environment. This process can give rise to distinctive spatiotemporal structures in reaction-diffusion media that occur as a result of active motor motion. Such locally induced nonequilibrium structure will play an important role in applications that involve motor dynamics in complex chemical media.

Nanomotor dynamics in a chemically oscillating medium

International Nuclear Information System (INIS)

Robertson, Bryan; Kapral, Raymond

2015-01-01

Synthetic nanomotors powered by chemical reactions have potential uses as cargo transport vehicles in both in vivo and in vitro applications. In many situations, motors will have to operate in out-of-equilibrium complex chemically reacting media, which supply fuel to the motors and remove the products they produce. Using molecular simulation and mean-field theory, this paper describes some of the new features that arise when a chemically powered nanomotor, operating through a diffusiophoretic mechanism, moves in an environment that supports an oscillatory chemical reaction network. It is shown how oscillations in the concentrations in chemical species in the environment give rise to oscillatory motor dynamics. More importantly, since the catalytic reactions on the motor that are responsible for its propulsion couple to the bulk phase reaction network, the motor can change its local environment. This process can give rise to distinctive spatiotemporal structures in reaction-diffusion media that occur as a result of active motor motion. Such locally induced nonequilibrium structure will play an important role in applications that involve motor dynamics in complex chemical media

Assessing the sustainability of Brazilian oleaginous crops - possible raw material to produce biodiesel

Energy Technology Data Exchange (ETDEWEB)

Takahashi, Fabio, E-mail: fabiotak@fea.unicamp.b [FEA - College of Food Engineering - Unicamp, CP 6121, CEP 13083-862 Campinas, SP (Brazil); Ortega, Enrique, E-mail: fabiotak@gmail.co [FEA - College of Food Engineering - Unicamp, CP 6121, CEP 13083-862 Campinas, SP (Brazil)

2010-05-15

The aim of this paper is to make an emergy assessment of oleaginous crops cultivated in Brazil, available to produce biodiesel, in order to determine which crop is the most sustainable. This study evaluates conventional agro-chemical farms that produce rapeseed (canola), oil palm, soybean, sunflower and cotton. Rapeseed (canola) crop uses 40.41% of renewable energy and it is the most sustainable conventional oil crop; on the other hand, it is not widely produced in Brazil, probably due to climate restrictions or low market demand. The oil palm emergy indicators are contradictory: its emergy exchange ratio (EER) value is the lower, showing the possibility of fair exchange, and the low transformity value indicates high efficiency; however, it also has low renewability (28.31%), indicating a high dependency on agro-chemicals (basically fertilizers). Oil palm is a potential energy source due to its high agricultural productivity, but appropriate management is necessary to increase its sustainability and reduce the use of non-renewable resources.

Assessing the sustainability of Brazilian oleaginous crops - possible raw material to produce biodiesel

International Nuclear Information System (INIS)

Takahashi, Fabio; Ortega, Enrique

2010-01-01

The aim of this paper is to make an emergy assessment of oleaginous crops cultivated in Brazil, available to produce biodiesel, in order to determine which crop is the most sustainable. This study evaluates conventional agro-chemical farms that produce rapeseed (canola), oil palm, soybean, sunflower and cotton. Rapeseed (canola) crop uses 40.41% of renewable energy and it is the most sustainable conventional oil crop; on the other hand, it is not widely produced in Brazil, probably due to climate restrictions or low market demand. The oil palm emergy indicators are contradictory: its emergy exchange ratio (EER) value is the lower, showing the possibility of fair exchange, and the low transformity value indicates high efficiency; however, it also has low renewability (28.31%), indicating a high dependency on agro-chemicals (basically fertilizers). Oil palm is a potential energy source due to its high agricultural productivity, but appropriate management is necessary to increase its sustainability and reduce the use of non-renewable resources.

Chemical modification of nanocellulose with canola oil fatty acid methyl ester

Science.gov (United States)

Liqing Wei; Umesh P. Agarwal; Kolby C. Hirth; Laurent M. Matuana; Ronald C. Sabo; Nicole M. Stark

2017-01-01

Cellulose nanocrystals (CNCs), produced from dissolving wood pulp, were chemically functionalized by transesterification with canola oil fatty acid methyl ester (CME). CME performs as both the reaction reagent and solvent. Transesterified CNC (CNCFE) was characterized for their chemical structure, morphology, crystalline structure, thermal stability, and hydrophobicity...

Chemical repair of trypsin-histidinyl radical

International Nuclear Information System (INIS)

Jovanovic, S.V.; Ruvarac, I.; Jankovic, I.; Josimovic, L.

1991-01-01

Oxyl radicals, such as hydroxyl, alkoxyl and peroxyl, react with biomolecules to produce bioradicals. Unless chemically repaired by suitable antioxidants, these bioradicals form stable products. This leads to loss of biological function of parent biomolecules with deleterious biological results, such as mutagenesis and cancer. Consequently, the understanding of the mechanisms of oxyl radical damage to biomolecules and chemical repair of such damage is crucial for the development of strategies for anticarcinogenesis and radioprotection. In this study the chemical repair of the histidinyl radical generated upon the trichloromethylperoxyl radical reaction with trypsin vas investigated by gamma radiolysis. The trypsin histidinyl radical is a resonance-stabilized heterocyclic free radical which was found to be unreactive with oxygen. The efficacy of the chemical repair of the trypsin-histidinyl radical by endogenous antioxidants which are electron donors (e.g. 5-hydroxytryptophan, uric acid) is compared to that of antioxidants which are H-atom donors (e. g. glutathione). 9 refs., 2 figs., 1 tab

Chemical characterization of the gels produced by the diazotrophic bacteria Rhizobium tropici and Mesorhizobium sp; Caracterizacao quimica dos geis produzidos pelas bacterias diazotroficas Rhizobium tropici e Mesorhizobium sp.

Energy Technology Data Exchange (ETDEWEB)

Monteiro, Nilson Kobori [Departamento de Engenharia e Tecnologia de Alimentos, Instituto de Biociencias, Letras e Ciencias Exatas, Universidade Estadual Paulista, Sao Jose do Rio Preto - SP (Brazil); Aranda-Selverio, Gabriel; Exposti, Diego Tadeu Degli; Silva, Maria de Lourdes Corradi da [Departamento de Fisica, Quimica e Biologia, Faculdade de Ciencias e Tecnologia, Universidade Estadual Paulista, Presidente Prudente - SP (Brazil); Lemos, Eliana Gertrudes Macedo; Campanharo, Joao Carlos [Departamento de Tecnologia, Faculdade de Ciencias Agrarias e Veterinaria, Universidade Estadual Paulista, Jaboticabal - SP (Brazil); Silveira, Joana Lea Meira [Departamento de Bioquimica e Biologia Molecular, Universidade Federal do Parana, Curitiba - PR (Brazil)

2012-07-01

The exopolysaccharides with characteristics of gel produced by Rhizobium tropici (EPSRT) and Mesorhizobium sp (EPSMR) are acidic heteropolysaccharide composed mainly of glucose and galactose in a molar ratio of 4:1 and 5:1 respectively, with traces of mannose ({approx} 1%). Chemical analysis showed the presence of uronic acid, pyruvate and acetyl-substituents in the structures of both polymers. Experiments of gel permeation chromatography and polyacrylamide gel electrophoresis showed that EPSRT and EPSMR are homogeneous molecules with low grade of polydispersity. The EPS were characterized using spectroscopic techniques of FT-IR, {sup 1}H and {sup 13}C-NMR. (author)

Biodiesel biorefinery: opportunities and challenges for microbial production of fuels and chemicals from glycerol waste.

Science.gov (United States)

Almeida, João R M; Fávaro, Léia C L; Quirino, Betania F

2012-07-18

The considerable increase in biodiesel production worldwide in the last 5 years resulted in a stoichiometric increased coproduction of crude glycerol. As an excess of crude glycerol has been produced, its value on market was reduced and it is becoming a "waste-stream" instead of a valuable "coproduct". The development of biorefineries, i.e. production of chemicals and power integrated with conversion processes of biomass into biofuels, has been singled out as a way to achieve economically viable production chains, valorize residues and coproducts, and reduce industrial waste disposal. In this sense, several alternatives aimed at the use of crude glycerol to produce fuels and chemicals by microbial fermentation have been evaluated. This review summarizes different strategies employed to produce biofuels and chemicals (1,3-propanediol, 2,3-butanediol, ethanol, n-butanol, organic acids, polyols and others) by microbial fermentation of glycerol. Initially, the industrial use of each chemical is briefly presented; then we systematically summarize and discuss the different strategies to produce each chemical, including selection and genetic engineering of producers, and optimization of process conditions to improve yield and productivity. Finally, the impact of the developments obtained until now are placed in perspective and opportunities and challenges for using crude glycerol to the development of biodiesel-based biorefineries are considered. In conclusion, the microbial fermentation of glycerol represents a remarkable alternative to add value to the biodiesel production chain helping the development of biorefineries, which will allow this biofuel to be more competitive.

[Relativity of commercial specification of Menthae Herba based on chemical analysis].

Science.gov (United States)

Ye, Dan; Zhao, Ming; Shao, Yang; Ouyang, Zhen; Peng, Hua-sheng; Han Bang-xing; Zhang, Wei-wan-qi; Gu, Xue-mei

2015-01-01

In order to compare the differences of 35 Menthae Herba samples collected on the market and at producing areas, the contents of six total terpenoids, the essential oil and chromatographic fingerprints were analyzed, which provided evidences for drawing up the commodity specifications and grading criteria of Menthae Herba. GC-MS method was used to analyze the chemical constituents of 35 different samples. The chromatographic fingerprints obtained by using GC were then evaluated by similarity analysis, hierarchical clustering analysis and principal component analysis. The relativity between the content of six terpenoids and the essential oil were studied. In this study, the chemical profiles of 35 samples from different producing areas had significant disparity. All samples collected in the report could be categorized into four chemical types, L-menthol, pulegone, carvone and L-menthone, but the chemical profiles had no relationship with the areas. The chromatographic fingerprints of the samples from different types were dissimilar, while the different producing areas were difficult to be separated. It was indicated that the content of volatile oil was positively correlated with the content of L-menthol and the sum of six total terpenoids. The content of the essential oil, L-menthol and the sum of six total terpenoids of Menthae Herba were considered as one of the commercial specifications and grading criteria. These results in the research could be helpful to draw up the commercial specification and grading criteria of Menthae Herba from a view of chemical information.

Variation in the chemical composition, physical characteristics and ...

African Journals Online (AJOL)

Variation in the chemical composition, physical characteristics and energy values of cereal grains produced in the Western Cape area of South Africa. TS Brand, CW Cruywagen, DA Brandt, M Viljoen, WW Burger ...

Chemicals from Agave sisalana Biomass: Isolation and Identification

Science.gov (United States)

Santos, Jener David Gonçalves; Vieira, Ivo Jose Curcino; Braz-Filho, Raimundo; Branco, Alexsandro

2015-01-01

Agave sisalana (sisal) is known worldwide as a source of hard fibers, and Brazil is the largest producer of sisal. Nonetheless, the process of removing the fibers of the sisal leaf generates 95% waste. In this study, we applied chemical sequential steps (hydrothermal extraction, precipitation, liquid-liquid extraction, crystallization, SiO2 and Sephadex LH 20 column chromatography) to obtain pectin, mannitol, succinic acid, kaempferol and a mixture of saponins as raw chemicals from sisal biomass. The structural identification of these compounds was performed though spectrometric methods, such as Infrared (IR), Ultraviolet (UV), Mass spectrometry (MS) and Nuclear magnetic resonance (NMR). All the sisal chemicals found in this work are used by both the chemical and pharmaceutical industries as excipients or active principles in products. PMID:25903149

Air Permitting Implications of a Biorefinery Producing Raw Bio-Oil in Comparison with Producing Gasoline and Diesel Blendstocks

Energy Technology Data Exchange (ETDEWEB)

Bhatt, Arpit H [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yi Min [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-02-01

A biorefinery, considered a chemical process plant under the Clean Air Act permitting program, could be classified as a major or minor source based on the size of the facility and magnitude of regulated pollutants emitted. Our previous analysis indicates that a biorefinery using fast pyrolysis conversion process to produce finished gasoline and diesel blendstocks with a capacity of processing 2,000 dry metric tons of biomass per day would likely be classified as a major source because several regulated pollutants (such as particulate matter, sulfur dioxide, nitrogen oxide) are estimated to exceed the 100 tons per year (tpy) major source threshold, applicable to chemical process plants. Being subject to a major source classification could pose additional challenges associated with obtaining an air permit in a timely manner before the biorefinery can start its construction. Recent developments propose an alternative approach to utilize bio-oil produced via the fast pyrolysis conversion process by shipping it to an existing petroleum refinery, where the raw bio-oil can be blended with petroleum-based feedstocks (e.g., vacuum gas oil) to produce gasoline and diesel blendstocks with renewable content. Without having to hydro-treat raw bio-oil, a biorefinery is likely to reduce its potential-to-emit to below the 100 tpy major source threshold, and therefore expedite its permitting process. We compare the PTE estimates for the two biorefinery designs with and without hydrotreating of bio-oils and examine the air permitting implications on potential air permit classification and discuss the best available control technology requirements for the major source biorefinery utilizing hydrotreating operation. Our analysis is expected to provide useful information to new biofuel project developers to identify opportunities to overcome challenges associated with air permitting.

Portable, Low-cost NMR with Laser-Lathe Lithography Produced

Energy Technology Data Exchange (ETDEWEB)

Herberg, J L; Demas, V; Malba, V; Bernhardt, A; Evans, L; Harvey, C; Chinn, S; Maxwell, R; Reimer, J; Pines, A

2006-12-21

Nuclear Magnetic Resonance (NMR) is unsurpassed in its ability to non-destructively probe chemical identity. Portable, low-cost NMR sensors would enable on-site identification of potentially hazardous substances, as well as the study of samples in a variety of industrial applications. Recent developments in RF microcoil construction (i.e. coils much smaller than the standard 5 mm NMR RF coils), have dramatically increased NMR sensitivity and decreased the limits-of-detection (LOD). We are using advances in laser pantographic microfabrication techniques, unique to LLNL, to produce RF microcoils for field deployable, high sensitivity NMR-based detectors. This same fabrication technique can be used to produce imaging coils for MRI as well as for standard hardware shimming or 'ex-situ' shimming of field inhomogeneities typically associated with inexpensive magnets. This paper describes a portable NMR system based on a laser-fabricated microcoil and homebuilt probe design. For testing this probe, we used a hand-held 2 kg Halbach magnet that can fit into the palm of a hand, and an RF probe with laser-fabricated microcoils. The focus of the paper is on the evaluation of the microcoils, RF probe, and first generation gradient coils. The setup of this system, initial results, sensitivity measurements, and future plans are discussed. The results, even though preliminary, are promising and provide the foundation for developing a portable, inexpensive NMR system for chemical analysis. Such a system will be ideal for chemical identification of trace substances on site.

Treatment of biomass to obtain a target chemical

Science.gov (United States)

Dunson, Jr., James B.; Tucker, III, Melvin P.; Elander, Richard T.; Hennessey, Susan Marie

2010-08-24

Target chemicals were produced using biocatalysts that are able to ferment sugars derived from treated biomass. Sugars were obtained by pretreating biomass under conditions of high solids and low ammonia concentration, followed by saccharification.

Evaluation of the nutritional value of locally produced forage in Korea using chemical analysis and in vitro ruminal fermentation.

Science.gov (United States)

Ki, Kwang Seok; Park, Su Bum; Lim, Dong Hyun; Seo, Seongwon

2017-03-01

The use of locally produced forage (LPF) in cattle production has economic and environmental advantages over imported forage. The objective of this study was to characterize the nutritional value of LPF commonly used in Korea. Differences in ruminal fermentation characteristics were also examined for the LPF species commonly produced from two major production regions: Chungcheong and Jeolla. Ten LPF (five from each of the two regions) and six of the most widely used imported forages originating from North America were obtained at least three times throughout a year. Each forage species was pooled and analyzed for nutrient content using detailed chemical analysis. Ruminal fermentation characteristics were also determined by in vitro anaerobic incubations using strained rumen fluid for 0, 3, 6, 12, 24, and 48 h. At each incubation time, total gas, pH, ammonia, volatile fatty acid (VFA) concentrations, and neutral detergent fiber digestibility were measured. By fitting an exponential model, gas production kinetics were obtained. Significant differences were found in the non-fiber carbohydrate (NFC) content among the forage species and the regions (pruminal fermentation of LPF between the two regions and interactions between regions and forage species were also significant (pruminal fermentation was lower in the forages from Chungcheong than from Jeolla (p<0.01), and total VFA concentration was higher in Chungcheong than in Jeolla (p = 0.05). This implies that fermentation was more active with the forages from Chungcheong than from Jeolla. Analysis of gas production profiles showed the rate of fermentation differed among forage species (p<0.05). The results of the present study showed that the nutritional values of some LPF (i.e., corn silage and Italian ryegrass) are comparable to those of imported forages widely used in Korea. This study also indicated that the nutritional value of LPF differs by origin, as well as by forage species. Detailed analyses of nutrient

Physico-chemical and sensorial evaluation of sugarcane spirits produced using distillation residue

Directory of Open Access Journals (Sweden)

Evandro Galvão Tavares Menezes

2013-02-01

Full Text Available The objective of the present study was to analyze the use of vinasse from cachaça as an ingredient of the fermentation medium for the spirit production. The fermentations were conducted out in three successive batches using a Saccharomyces cerevisiae isolate. In the first batch, the sugarcane broth was only diluted with distilled water. In the second and third batches, the fermentations were carried out using the cane broth diluted with vinasse from the distillation of the sugarcane wines of the first and second batches, respectively at a concentration of 10% (v/v. The spirits were submitted to the physicochemical and sensorial analyses. The results showed that vinasse addition did not affect the fermentation, distillation and chemical-sensorial quality of the beverage. Therefore, the vinasse addition could be an alternative use for that residue.

The chemical oxidation of lignin found in Sappi Saiccor dissolving ...

African Journals Online (AJOL)

Sappi Saiccor (situated in Durban, South Africa) dissolving pulp mill effluent, produced from an acid bisulphite pulping process, uses acacia and eucalyptus hardwoods to produce a unique and different blend of lignin that has not been previously studied. The chemical oxidation of lignin found in Sappi Saiccor's effluent has ...

Production of nitrogen containing chemicals from cyanophycin

NARCIS (Netherlands)

Könst, P.M.

2011-01-01

Currently nitrogen containing bulk chemicals are produced from naphtha. However, as explained in Chapter 1 it would be more energy efficient, less capital intensive and eventually more economical to start from functionalized compounds that already have nitrogen incorporated, such as amino

Chemical looping fluidized-bed concentrating solar power system and method

Science.gov (United States)

Ma, Zhiwen

2017-07-11

A concentrated solar power (CSP) plant comprises a receiver configured to contain a chemical substance for a chemical reaction and an array of heliostats. Each heliostat is configured to direct sunlight toward the receiver. The receiver is configured to transfer thermal energy from the sunlight to the chemical substance in a reduction reaction. The CSP plant further comprises a first storage container configured to store solid state particles produced by the reduction reaction and a heat exchanger configured to combine the solid state particles and gas through an oxidation reaction. The heat exchanger is configured to transfer heat produced in the oxidation reaction to a working fluid to heat the working fluid. The CSP plant further comprises a power turbine coupled to the heat exchanger, such that the heated working fluid turns the power turbine, and a generator coupled to and driven by the power turbine to generate electricity.

Physico-Chemical Analysis and Sensory Evaluation of Bread

African Journals Online (AJOL)

Shuaibu et al.

Physico-Chemical Analysis and Sensory Evaluation of Bread Produced Using ... analysis of the bread samples revealed that the moisture content ..... 72. Jarup, L. ,2003. Hazards of heavy metal contamination. Br Med. Bull; 68, pp.167-82.

Chemical investigations of volatile kairomones produced by Hyphantria cunea (Drury), a host of the parasitoid Chouioia cunea Yang.

Science.gov (United States)

Zhu, G; Pan, L; Zhao, Y; Zhang, X; Wang, F; Yu, Y; Fan, W; Liu, Q; Zhang, S; Li, M

2017-04-01

In tritrophic 'plants-herbivores-natural enemies' systems, there are relatively few reports concerning the role(s) of kairomones in pupal parasitism. Chouioia cunea Yang (Hymenoptera: Eulophidae), an endoparasitic chalcid wasp, parasitizes pupae of the fall webworm (Hyphantria cunea Drury). The role of host-related kairomones was investigated using electroantennogram (EAG) and behavioral techniques. Chemicals from some host stages (pupae) and host by-products (frass), induced arrestment behavior of female parasitoids, while chemicals from prepupae, were inactive. Gas chromatography-mass spectrometry analysis of volatiles collected from pupae, frass and prepupae using solid-phase microextration revealed seven compounds with carbon chain lengths ranging from C4 to C20. All of the chemicals elicited significant EAG responses in C. cunea. Y-tube olfactometer bioassays demonstrated a significant positive response of mated female C. cunea to 1-dodecene. These data provide a better understanding of the host location mechanisms of pupal parasitoid.

SAIChE Conference Poster: Irradiation treatment of dissolving pulps produced in South Africa

CSIR Research Space (South Africa)

Ocwelwang, A

2014-07-01

Full Text Available stream_source_info Ocwelwang_2014_ABSTRACT.pdf.txt stream_content_type text/plain stream_size 876 Content-Encoding ISO-8859-1 stream_name Ocwelwang_2014_ABSTRACT.pdf.txt Content-Type text/plain; charset=ISO-8859-1 2014... International Conference on Chemical Thermodynamics and South African Institution of Chemical Engineering Conference, Durban, South Africa, 27 July - 1 August 2014 SAIChE Conference Poster: Irradiation treatment of dissolving pulps produced in South...

Characterization of Soluble Organics in Produced Water

Energy Technology Data Exchange (ETDEWEB)

Bostick, D.T.

2002-01-16

Soluble organics in produced water and refinery effluents represent treatment problems for the petroleum industry. Neither the chemistry involved in the production of soluble organics nor the impact of these chemicals on total effluent toxicity is well understood. The U.S. Department of Energy provides funding for Oak Ridge National Laboratory (ORNL) to support a collaborative project with Shell, Chevron, Phillips, and Statoil entitled ''Petroleum and Environmental Research Forum project (PERF 9844: Manage Water-Soluble Organics in Produced Water''). The goal of this project, which involves characterization and evaluation of these water-soluble compounds, is aimed at reducing the future production of such contaminants. To determine the effect that various drilling conditions might have on water-soluble organics (WSO) content in produced water, a simulated brine water containing the principal inorganic components normally found in Gulf of Mexico (GOM) brine sources was prepared. The GOM simulant was then contacted with as-received crude oil from a deep well site to study the effects of water cut, produced-water pH, salinity, pressure, temperature, and crude oil sources on the type and content of the WSO in produced water. The identities of individual semivolatile organic compounds (SVOCs) were determined in all as-received crude and actual produced water samples using standard USEPA Method (8270C) protocol. These analyses were supplemented with the more general measurements of total petroleum hydrocarbon (TPH) content in the gas (C{sub 6}-C{sub 10}), diesel (C{sub 10}-C{sub 20}), and oil (C{sub 20}-C{sub 28}) carbon ranges as determined by both gas chromatographic (GC) and infrared (IR) analyses. An open liquid chromatographic procedure was also used to differentiate the saturated hydrocarbon, aromatic hydrocarbon, and polar components within the extractable TPH. Inorganic constituents in the produced water were analyzed by ion

Chemical Engineering in Space

Science.gov (United States)

Lobmeyer, Dennis A.; Meneghelli, Barry; Steinrock, Todd (Technical Monitor)

2001-01-01

The aerospace industry has long been perceived as the domain of both physicists and mechanical engineers. This perception has endured even though the primary method of providing the thrust necessary to launch a rocket into space is chemical in nature. The chemical engineering and chemistry personnel behind the systems that provide access to space have labored in the shadows of the physicists and mechanical engineers. As exploration into the cosmos moves farther away from Earth, there is a very distinct need for new chemical processes to help provide the means for advanced space exploration. The state of the art in launch systems uses chemical propulsion systems, primarily liquid hydrogen and liquid oxygen, to provide the energy necessary to achieve orbit. As we move away from Earth, there are additional options for propulsion. Unfortunately, few of these options can compare to the speed or ease of use provided by the chemical propulsion agents. It is with great care and significant cost that gaseous compounds such as hydrogen and oxygen are liquefied and become dense enough to use for rocket fuel. These low-temperature liquids fall within a specialty area known as cryogenics. Cryogenics, the science and art of producing cold operating conditions for use on Earth, in orbit, or on some other nonterrestrial body, has become increasingly important to our ability to travel within our solar system. The production of cryogenic fuels and the long-term storage of these fluids are necessary for travel. As our explorations move farther away from Earth, we need to address how to produce the necessary fuels to make a round-trip. The cost and the size of these expeditions are extreme at best. If we take everything necessary for our survival for the round-trip, we invalidate any chance of travel in the near future. As with the early explorers on Earth, we need to harvest much of our energy and our life support from the celestial bodies. The in situ production of these energy

Biodiesel biorefinery: opportunities and challenges for microbial production of fuels and chemicals from glycerol waste

Directory of Open Access Journals (Sweden)

Almeida João R M

2012-07-01

Full Text Available Abstract The considerable increase in biodiesel production worldwide in the last 5 years resulted in a stoichiometric increased coproduction of crude glycerol. As an excess of crude glycerol has been produced, its value on market was reduced and it is becoming a “waste-stream” instead of a valuable “coproduct”. The development of biorefineries, i.e. production of chemicals and power integrated with conversion processes of biomass into biofuels, has been singled out as a way to achieve economically viable production chains, valorize residues and coproducts, and reduce industrial waste disposal. In this sense, several alternatives aimed at the use of crude glycerol to produce fuels and chemicals by microbial fermentation have been evaluated. This review summarizes different strategies employed to produce biofuels and chemicals (1,3-propanediol, 2,3-butanediol, ethanol, n-butanol, organic acids, polyols and others by microbial fermentation of glycerol. Initially, the industrial use of each chemical is briefly presented; then we systematically summarize and discuss the different strategies to produce each chemical, including selection and genetic engineering of producers, and optimization of process conditions to improve yield and productivity. Finally, the impact of the developments obtained until now are placed in perspective and opportunities and challenges for using crude glycerol to the development of biodiesel-based biorefineries are considered. In conclusion, the microbial fermentation of glycerol represents a remarkable alternative to add value to the biodiesel production chain helping the development of biorefineries, which will allow this biofuel to be more competitive.

Chemicals from Agave sisalana Biomass: Isolation and Identification

Directory of Open Access Journals (Sweden)

Jener David Gonçalves Santos

2015-04-01

Full Text Available Agave sisalana (sisal is known worldwide as a source of hard fibers, and Brazil is the largest producer of sisal. Nonetheless, the process of removing the fibers of the sisal leaf generates 95% waste. In this study, we applied chemical sequential steps (hydrothermal extraction, precipitation, liquid-liquid extraction, crystallization, SiO2 and Sephadex LH 20 column chromatography to obtain pectin, mannitol, succinic acid, kaempferol and a mixture of saponins as raw chemicals from sisal biomass. The structural identification of these compounds was performed though spectrometric methods, such as Infrared (IR, Ultraviolet (UV, Mass spectrometry (MS and Nuclear magnetic resonance (NMR. All the sisal chemicals found in this work are used by both the chemical and pharmaceutical industries as excipients or active principles in products.

Engineering microbes for efficient production of chemicals

Science.gov (United States)

Gong, Wei; Dole, Sudhanshu; Grabar, Tammy; Collard, Andrew Christopher; Pero, Janice G; Yocum, R Rogers

2015-04-28

This present invention relates to production of chemicals from microorganisms that have been genetically engineered and metabolically evolved. Improvements in chemical production have been established, and particular mutations that lead to those improvements have been identified. Specific examples are given in the identification of mutations that occurred during the metabolic evolution of a bacterial strain genetically engineered to produce succinic acid. This present invention also provides a method for evaluating the industrial applicability of mutations that were selected during the metabolic evolution for increased succinic acid production. This present invention further provides microorganisms engineered to have mutations that are selected during metabolic evolution and contribute to improved production of succinic acid, other organic acids and other chemicals of commercial interest.

Chemical forms of 35S in KCl crystals doped with elementary 35S. Pt. 1

International Nuclear Information System (INIS)

Maddock, A.G.; Todorovsky, D.S.

1983-01-01

KCl crystals have been doped with 35 S at low chemical concentrations. Upon solution of the doped crystals in cyanide solution and analysis by the method of Kasrai and Maddock, the 35 S appears in the same chemical forms as are found for the 35 S produced in similar crystals by the (n, p) reaction. Reactions are suggested whereby these products may be produced. (orig.)

Efficient chemical and enzymatic saccharification of the lignocellulosic residue from Agave tequilana bagasse to produce ethanol by Pichia caribbica.

Science.gov (United States)

Saucedo-Luna, Jaime; Castro-Montoya, Agustin Jaime; Martinez-Pacheco, Mauro Manuel; Sosa-Aguirre, Carlos Ruben; Campos-Garcia, Jesus

2011-06-01

Bagasse of Agave tequilana (BAT) is the residual lignocellulosic waste that remains from tequila production. In this study we characterized the chemical composition of BAT, which was further saccharified and fermented to produce ethanol. BAT was constituted by cellulose (42%), hemicellulose (20%), lignin (15%), and other (23%). Saccharification of BAT was carried out at 147 °C with 2% sulfuric acid for 15 min, yielding 25.8 g/l of fermentable sugars, corresponding to 36.1% of saccharificable material (cellulose and hemicellulose contents, w/w). The remaining lignocellulosic material was further hydrolyzed by commercial enzymes, ~8.2% of BAT load was incubated for 72 h at 40 °C rendering 41 g/l of fermentable sugars corresponding to 73.6% of the saccharificable material (w/w). Mathematic surface response analysis of the acid and enzymatic BAT hydrolysis was used for process optimization. The results showed a satisfactory correlation (R (2) = 0.90) between the obtained and predicted responses. The native yeast Pichia caribbica UM-5 was used to ferment sugar liquors from both acid and enzymatic hydrolysis to ethanol yielding 50 and 87%, respectively. The final optimized process generated 8.99 g ethanol/50 g of BAT, corresponding to an overall 56.75% of theoretical ethanol (w/w). Thus, BAT may be employed as a lignocellulosic raw material for bioethanol production and can contribute to BAT residue elimination from environment.

Sustainability of biofuels and renewable chemicals production from biomass.

Science.gov (United States)

Kircher, Manfred

2015-12-01

In the sectors of biofuel and renewable chemicals the big feedstock demand asks, first, to expand the spectrum of carbon sources beyond primary biomass, second, to establish circular processing chains and, third, to prioritize product sectors exclusively depending on carbon: chemicals and heavy-duty fuels. Large-volume production lines will reduce greenhouse gas (GHG) emission significantly but also low-volume chemicals are indispensable in building 'low-carbon' industries. The foreseeable feedstock change initiates innovation, securing societal wealth in the industrialized world and creating employment in regions producing biomass. When raising the investments in rerouting to sustainable biofuel and chemicals today competitiveness with fossil-based fuel and chemicals is a strong issue. Many countries adopted comprehensive bioeconomy strategies to tackle this challenge. These public actions are mostly biased to biofuel but should give well-balanced attention to renewable chemicals as well. Copyright © 2015 Elsevier Ltd. All rights reserved.

Chemically sensitive interfaces on SAW devices

Energy Technology Data Exchange (ETDEWEB)

Ricco, A.J.; Martin, S.J. [Sandia National Labs., Albuquerque, NM (United States); Crooks, R.M.; Xu, Chuanjing [Texas A and M Univ., College Station, TX (United States); Allred, R.E. [Adherent Technologies, Inc., Albuquerque, NM (United States)

1993-11-01

Using surface acoustic wave (SAW) devices, three approaches to the effective use of chemically sensitive interfaces that are not highly chemically selective have been examined: (1) molecular identification from time-resolved permeation transients; (2) using multifrequency SAW devices to determine the frequency dependence of analyte/film interactions; (3) use of an array of SAW devices bearing diverse chemically sensitive interfaces to produce a distinct response pattern for each analyte. In addition to their well-known sensitivity to mass changes (0.0035 monolayer of N{sub 2} can be measured), SAW devices respond to the mechanical and electronic properties of thin films, enhancing response information content but making a thorough understanding of the perturbation critical. Simultaneous measurement of changes in frequency and attenuation, which can provide the information necessary to determine the type of perturbation, are used as part of the above discrimination schemes.

Insights into biogenic and chemical production of inorganic nanomaterials and nanostructures.

Science.gov (United States)

Faramarzi, Mohammad Ali; Sadighi, Armin

2013-03-01

The synthesis of inorganic nanomaterials and nanostructures by the means of diverse physical, chemical, and biological principles has been developed in recent decades. The nanoscale materials and structures creation continue to be an active area of researches due to the exciting properties of the resulting nanomaterials and their innovative applications. Despite physical and chemical approaches which have been used for a long time to produce nanomaterials, biological resources as green candidates that can replace old production methods have been focused in recent years to generate various inorganic nanoparticles (NPs) or other nanoscale structures. Cost-effective, eco-friendly, energy efficient, and nontoxic produced nanomaterials using diverse biological entities have been received increasing attention in the last two decades in contrast to physical and chemical methods owe using toxic solvents, generate unwanted by-products, and high energy consumption which restrict the popularity of these ways employed in nanometric science and engineering. In this review, the biosynthesis of gold, silver, gold-silver alloy, magnetic, semiconductor nanocrystals, silica, zirconia, titania, palladium, bismuth, selenium, antimony sulfide, and platinum NPs, using bacteria, actinomycetes, fungi, yeasts, plant extracts and also informational bio-macromolecules including proteins, polypeptides, DNA, and RNA have been reported extensively to mention the current status of the biological inorganic nanomaterial production. In other hand, two well-known wet chemical techniques, namely chemical reduction and sol-gel methods, used to produce various types of nanocrystalline powders, metal oxides, and hybrid organic-inorganic nanomaterials have presented. Copyright © 2012 Elsevier B.V. All rights reserved.

Hydrogen producing method and device therefor

International Nuclear Information System (INIS)

Iwamura, Yasuhiro; Ito, Takehiko; Goto, Nobuo; Toyota, Ichiro; Tonegawa, Hiroshi.

1997-01-01

The present invention concerns a process for producing hydrogen from water by utilizing a γ · X ray radiation source such as spent nuclear fuels. Hydrogen is formed from water by combining a scintillator which uses a γ · X ray radiation source as an energy source to emit UV light and an optical catalyst or an optical catalyst electrode which undergoes UV light to decompose water into hydrogen and oxygen. The present invention provides a method of effectively using spent fuel assemblies which have not been used at present and capable of converting them into hydrogen as storable chemical energy. (N.H.)

Chemical microsensors based on polymer fiber composites

Science.gov (United States)

Kessick, Royal F.; Levit, Natalia; Tepper, Gary C.

2005-05-01

There is an urgent need for new chemical sensors for defense and security applications. In particular, sensors are required that can provide higher sensitivity and faster response in the field than existing baseline technologies. We have been developing a new solid-state chemical sensor technology based on microscale polymer composite fiber arrays. The fibers consist of an insulating polymer doped with conducting particles and are electrospun directly onto the surface of an interdigitated microelectrode. The concentration of the conducting particles within the fiber is controlled and is near the percolation threshold. Thus, the electrical resistance of the polymer fiber composite is very sensitive to volumetric changes produced in the polymer by vapor absorption. Preliminary results are presented on the fabrication and testing of the new microsensor. The objective is to take advantage of the very high surface to volume ratio, low thermal mass and linear geometry of the composite fibers to produce sensors exhibiting an extremely high vapor sensitivity and rapid response. The simplicity and low cost of a resistance-based chemical microsensor makes this sensing approach an attractive alternative to devices requiring RF electronics or time-of-flight analysis. Potential applications of this technology include battlespace awareness, homeland security, environmental surveillance, medical diagnostics and food process monitoring.

Emissions from Produced Water Treatment Ponds, Uintah Basin, Utah, USA

Science.gov (United States)

Mansfield, M. L.; Lyman, S. N.; Tran, H.; O'Neil, T.; Anderson, R.

2015-12-01

An aqueous phase, known as "produced water," usually accompanies the hydrocarbon fluid phases that are extracted from Earth's crust during oil and natural gas extraction. Produced water contains dissolved and suspended organics and other contaminants and hence cannot be discharged directly into the hydrosphere. One common disposal method is to discharge produced water into open-pit evaporation ponds. Spent hydraulic fracturing fluids are also often discharged into the same ponds. It is obvious to anyone with a healthy olfactory system that such ponds emit volatile organics to the atmosphere, but very little work has been done to characterize such emissions. Because oil, gas, and water phases are often in contact in geologic formations, we can expect that more highly soluble compounds (e.g., salts, alcohols, carbonyls, carboxyls, BTEX, etc.) partition preferentially into produced water. However, as the water in the ponds age, many physical, chemical, and biological processes alter the composition of the water, and therefore the composition and strength of volatile organic emissions. For example, some ponds are aerated to hasten evaporation, which also promotes oxidation of organics dissolved in the water. Some ponds are treated with microbes to promote bio-oxidation. In other words, emissions from ponds are expected to be a complex function of the composition of the water as it first enters the pond, and also of the age of the water and of its treatment history. We have conducted many measurements of emissions from produced water ponds in the Uintah Basin of eastern Utah, both by flux chamber and by evacuated canister sampling with inverse modeling. These measurements include fluxes of CO2, CH4, methanol, and many other volatile organic gases. We have also measured chemical compositions and microbial content of water in the ponds. Results of these measurements will be reported.

TREATMENT OF PRODUCED OIL AND GAS WATERS WITH SURFACTANT-MODIFIED ZEOLITE

Energy Technology Data Exchange (ETDEWEB)

Lynn E. Katz; R.S. Bowman; E.J. Sullivan

2003-11-01

Co-produced water from the oil and gas industry accounts for a significant waste stream in the United States. It is by some estimates the largest single waste stream in the country, aside from nonhazardous industrial wastes. Characteristics of produced water include high total dissolved solids content, dissolved organic constituents such as benzene and toluene, an oil and grease component, and chemicals added during the oil-production process. While most of the produced water is disposed via reinjection, some must be treated to remove organic constituents before the water is discharged. Current treatment options are successful in reducing the organic content; however, they cannot always meet the levels of current or proposed regulations for discharged water. Therefore, an efficient, cost-effective treatment technology is needed. Surfactant-modified zeolite (SMZ) has been used successfully to treat contaminated ground water for organic and inorganic constituents. In addition, the low cost of natural zeolites makes their use attractive in water-treatment applications. This report summarizes the work and results of this four-year project. We tested the effectiveness of surfactant-modified zeolite (SMZ) for removal of BTEX with batch and column experiments using waters with BTEX concentrations that are comparable to those of produced waters. The data from our experimental investigations showed that BTEX sorption to SMZ can be described by a linear isotherm model, and competitive effects between compounds were not significant. The SMZ can be readily regenerated using air stripping. We field-tested a prototype SMZ-based water treatment system at produced water treatment facilities and found that the SMZ successfully removes BTEX from produced waters as predicted by laboratory studies. When compared to other existing treatment technologies, the cost of the SMZ system is very competitive. Furthermore, the SMZ system is relatively compact, does not require the storage of

Approach to chemical equilibrium in thermal models

International Nuclear Information System (INIS)

Boal, D.H.

1984-01-01

The experimentally measured (μ - , charged particle)/(μ - ,n) and (p,n/p,p') ratios for the emission of energetic nucleons are used to estimate the time evolution of a system of secondary nucleons produced in a direct interaction of a projectile or captured muon. The values of these ratios indicate that chemical equilibrium is not achieved among the secondary nucleons in noncomposite induced reactions, and this restricts the time scale for the emission of energetic nucleons to be about 0.7 x 10 -23 sec. It is shown that the reason why thermal equilibrium can be reached so rapidly for a particular nucleon species is that the sum of the particle spectra produced in multiple direct reactions looks surprisingly thermal. The rate equations used to estimate the reaction times for muon and nucleon induced reactions are then applied to heavy ion collisions, and it is shown that chemical equilibrium can be reached more rapidly, as one would expect

Chemical inhibition of the contaminant Lactobacillus fermentum from distilleries producing fuel bioethanol

Directory of Open Access Journals (Sweden)

Pedro de Oliva Neto

2014-06-01

Full Text Available The purpose of this study was to determine the Minimum Inhibitory Concentration (MIC of pure or mixed chemicals for Saccharomyces cerevisiae and Lactobacillus fermentum in the samples isolated from distilleries with serious bacterial contamination problems. The biocides, which showed the best results were: 3,4,4' trichlorocarbanilide (TCC, tested at pH 4.0 (MIC = 3.12 mg/l, TCC with benzethonium chloride (CBe at pH 6.0 (MIC = 3.12 mg/l and TCC mixed with benzalkonium chloride (CBa at pH 6.0 (MIC = 1.53 mg /l. If CBa was used in sugar cane milling in 1:1 ratio with TCC, a 8 times reduction of CBa was possible. This formulation also should be tested in fermentation steps since it was more difficult for the bacterium to develop resistance to biocide. There was no inhibition of S. cerevisiae and there were only antibiotics as an option to bacterial control of fuel ethanol fermentation by S. cerevisiae.

Design of High Quality Chemical XOR Gates with Noise Reduction.

Science.gov (United States)

Wood, Mackenna L; Domanskyi, Sergii; Privman, Vladimir

2017-07-05

We describe a chemical XOR gate design that realizes gate-response function with filtering properties. Such gate-response function is flat (has small gradients) at and in the vicinity of all the four binary-input logic points, resulting in analog noise suppression. The gate functioning involves cross-reaction of the inputs represented by pairs of chemicals to produce a practically zero output when both are present and nearly equal. This cross-reaction processing step is also designed to result in filtering at low output intensities by canceling out the inputs if one of the latter has low intensity compared with the other. The remaining inputs, which were not reacted away, are processed to produce the output XOR signal by chemical steps that result in filtering at large output signal intensities. We analyze the tradeoff resulting from filtering, which involves loss of signal intensity. We also discuss practical aspects of realizations of such XOR gates. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Demand and supply of hydrogen as chemical feedstock in USA

Science.gov (United States)

Huang, C. J.; Tang, K.; Kelley, J. H.; Berger, B. J.

1979-01-01

Projections are made for the demand and supply of hydrogen as chemical feedstock in USA. Industrial sectors considered are petroleum refining, ammonia synthesis, methanol production, isocyanate manufacture, edible oil processing, coal liquefaction, fuel cell electricity generation, and direct iron reduction. Presently, almost all the hydrogen required is produced by reforming of natural gas or petroleum fractions. Specific needs and emphases are recommended for future research and development to produce hydrogen from other sources to meet the requirements of these industrial sectors. The data and the recommendations summarized in this paper are based on the Workshop 'Supply and Demand of Hydrogen as Chemical Feedstock' held at the University of Houston on December 12-14, 1977.

Chemical Evolution of a Protoplanetary Disk

Science.gov (United States)

Semenov, Dmitry A.

2011-12-01

In this paper we review recent progress in our understanding of the chemical evolution of protoplanetary disks. Current observational constraints and theoretical modeling on the chemical composition of gas and dust in these systems are presented. Strong variations of temperature, density, high-energy radiation intensities in these disks, both radially and vertically, result in a peculiar disk chemical structure, where a variety of processes are active. In hot, dilute and heavily irradiated atmosphere only the most photostable simple radicals and atoms and atomic ions exist, formed by gas-phase processes. Beneath the atmosphere a partly UV-shielded, warm molecular layer is located, where high-energy radiation drives rich ion-molecule and radical-radical chemistry, both in the gas phase and on dust surfaces. In a cold, dense, dark disk midplane many molecules are frozen out, forming thick icy mantles where surface chemistry is active and where complex polyatomic (organic) species are synthesized. Dynamical processes affect disk chemical composition by enriching it in abundances of complex species produced via slow surface processes, which will become detectable with ALMA.

Isolation and Characterization of Pollulan Produced by a Local Isolate of Aureobasidium Pullulans

OpenAIRE

Kassim, Mohammad Bashir Ismail [محمد بشيراسماعيل قاسم

2000-01-01

A local isolate of Aureobasidium pullulans was obtained from fig leaves surface. The isolate was identified as A. pullulans on the basis of appearance of polymorphism in the colonies, melanin pigment and pullulan production in shake flask cultures. Pullulan production by the local isolate of A pullulans was two thirds of that produced by ATCC 42023. The studies of physico — chemical properties, chemical analysis, sugar composition periodate oxidation and smith degradation showed that the pull...

Genome and transcriptome of the natural isopropanol producer Clostridium beijerinckii DSM6423

NARCIS (Netherlands)

Máté de Gérando, Hadrien; Wasels, François; Bisson, Angélique; Clement, Benjamin; Bidard, Frédérique; Jourdier, Etienne; López-Contreras, Ana María; Lopes Ferreira, Nicolas

2018-01-01

Background: There is a worldwide interest for sustainable and environmentally-friendly ways to produce fuels and chemicals from renewable resources. Among them, the production of acetone, butanol and ethanol (ABE) or Isopropanol, Butanol and Ethanol (IBE) by anaerobic fermentation has already a long

Chemical and UV Mutagenesis.

Science.gov (United States)

Bose, Jeffrey L

2016-01-01

The ability to create mutations is an important step towards understanding bacterial physiology and virulence. While targeted approaches are invaluable, the ability to produce genome-wide random mutations can lead to crucial discoveries. Transposon mutagenesis is a useful approach, but many interesting mutations can be missed by these insertions that interrupt coding and noncoding sequences due to the integration of an entire transposon. Chemical mutagenesis and UV-based random mutagenesis are alternate approaches to isolate mutations of interest with the potential of only single nucleotide changes. Once a standard method, difficulty in identifying mutation sites had decreased the popularity of this technique. However, thanks to the recent emergence of economical whole-genome sequencing, this approach to making mutations can once again become a viable option. Therefore, this chapter provides an overview protocol for random mutagenesis using UV light or DNA-damaging chemicals.

Surface chemical reactions induced by molecules electronically-excited in the gas

DEFF Research Database (Denmark)

Petrunin, Victor V.

2011-01-01

and alignment are taking place, guiding all the molecules towards the intersections with the ground state PES, where transitions to the ground state PES will occur with minimum energy dissipation. The accumulated kinetic energy may be used to overcome the chemical reaction barrier. While recombination chemical...... be readily produced. Products of chemical adsorption and/or chemical reactions induced within adsorbates are aggregated on the surface and observed by light scattering. We will demonstrate how pressure and spectral dependencies of the chemical outcomes, polarization of the light and interference of two laser...... beams inducing the reaction can be used to distinguish the new process we try to investigate from chemical reactions induced by photoexcitation within adsorbed molecules and/or gas phase photolysis....

Gene assembly via one-pot chemical ligation of DNA promoted by DNA nanostructures

DEFF Research Database (Denmark)

Manuguerra, Ilenia; Croce, Stefano; El-Sagheer, Afaf H.

2018-01-01

Current gene synthesis methods are driven by enzymatic reactions. Here we report the one-pot synthesis of a chemically-ligated gene from 14 oligonucleotides. The chemical ligation benefits from the highly efficient click chemistry approach templated by DNA nanostructures, and produces modified DNA...

Chemical modifications and applications of alternating aliphatic polyketones

NARCIS (Netherlands)

Zhang, Youchun

2008-01-01

Alternating aliphatic polyketones, produced by co- and terpolymerization of carbon monoxide and olefins (mixtures of ethylene and propylene) using palladium-based homogeneous catalysis represent a very promising class of polymers for a wide range of applications. Besides many interesting chemical

Structural and morphological properties of electroceramics for chemical sensors

International Nuclear Information System (INIS)

Tor Vergata, Via della Ricerca Scientifica, Roma (Italy). Dipartimento di Scienze e Tecnologie Chimiche)" data-affiliation=" (Universita' di Roma Tor Vergata, Via della Ricerca Scientifica, Roma (Italy). Dipartimento di Scienze e Tecnologie Chimiche)" >Enrico Traversa

1996-01-01

Ceramic materials possess a unique structure consisting of grains, grain boundaries, surfaces and pores, which makes them suitable for chemical sensors. The control of the chemical composition and microstructure of electrochemicals is fundamental for controlling their properties. Ceramics with a given composition and microstructure can be produced by controlling the different steps of their processing. The chemical processing of ceramics offer many advantages in terms of control and reproducibility, with respect to the conventional ceramics processing. Results are reported about the chemical processing of perovskite-type oxides for gas sensors and about the novel humidity-sensitive electrical properties of sol-gel processed alkali-doped titania films. The structural and morphological characterization of these materials permits the understanding of the sensitive electrical properties of the ceramics (71 refs.)

Mycoflora assessment, growth and toxigenic features of patulin-producers in kiwifruit in China.

Science.gov (United States)

Wang, Yuan; Feng, Kewei; Liu, Bin; Zhang, Zhiwei; Wei, Jianping; Yuan, Yahong; Yue, Tianli

2018-05-01

Fungal development in agricultural products may cause mycotoxin contamination, which is a significant threat to food safety. Patulin (PAT) and PAT-producer contamination has been established as a worldwide problem. The present study aimed to investigate the mycoflora and PAT-producers present in kiwifruits and environmental samples collected from orchards and processing plants in Shaanxi Province, China. Variations in mycoflora were observed in different samples, with penicillia and aspergilli as the predominant genera. Approximately 42.86% of dropped fruits were contaminated with PAT-producers, which harbored the 6-methylsalicylic acid synthase and the isoepoxydon dehydrogenase genes that are involved in PAT biosynthesis. The growth of Penicillium expansum, Penicillium griseofulvum and Penicillium paneum in kiwi puree agar (KPA) medium and kiwi juice well fitted the modified Gompertz and Baranyi and Roberts models (R 2 ≥ 0.95). A significant positive correlation between colony diameter and PAT content in KPA medium of P. expansum and P. griseofulvum was observed (P < 0.05). The present study analyzed the mycofloral composition and the potential risk for PAT and PAT-producer contamination in kiwifruit, which may be utilized in the establishment of proper management practices in the kiwifruit industry. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Biopitch produced from eucalyptus wood pyrolysis liquids as a renewable binder for carbon electrode manufacture

Directory of Open Access Journals (Sweden)

Rocha J.D.

2002-01-01

Full Text Available Interest in biomass as a clean source of fuel, chemicals and materials is growing fast. What is attractive about biomass is its renewability and that it is CO2 balanced and sulfur-free. Biomass pyrolysis produces charcoal, bio-oil and gases in different proportions, depending on the technology and raw material used. In this study biopitch, a substitute for fossil pitches in electrodes, was produced from bio-oil distillation in bench-scale equipment. Biopitch and charcoal were mixed and thermically modified to give prebaked electrodes. The physico-chemical and mechanical properties of the biopitch and final electrodes were measured and compared with those of coal tar and petroleum materials. Despite their similar application, biomaterials are structurally and chemically different from minerals. The oxygen content in biopitch is ca 20 wt% and in mineral pitches it is no more than 2 wt%. Characterization experiments for electrode samples measured electrical resistivity, Young's modulus, rupture strength, density, porosity and proximate analysis.

Potency of Amylase-producing Bacteria and Optimization Amylase Activities

Science.gov (United States)

Indriati, G.; Megahati, R. R. P.; Rosba, E.

2018-04-01

Enzymes are capable to act as biocatalyst for a wide variety of chemical reactions. Amylase have potential biotechnological applications in a wide range of industrial processes and account for nearly 30% of the world’s enzyme market. Amylase are extracellular enzymes that catalyze the hydrolysis of internal α-1,4-glycosidic linkages in starch to dextrin, and other small carbohydrate molecules constituted of glucose units. Although enzymes are produced from animal and plant sources, the microbial sources are generally the most suitable for commercial applications. Bacteria from hot springs is widely used as a source of various enzymes, such as amylase. But the amount of amylase-producing bacteria is still very limited. Therefore it is necessary to search sources of amylase-producing bacteria new, such as from hot springs Pariangan. The purpose of this study was to isolation of amylase-producing bacteria from Pariangan hot spring, West Sumatera and amylase activity optimization. The results were obtained 12 isolates of thermophilic bacteria and 5 isolates of amyalse-producing bacteria with the largest amylolytic index of 3.38 mm. The highest amylase activity was obtained at 50°C and pH 7.5.

Chemical signaling between plants and plant-pathogenic bacteria.

Science.gov (United States)

Venturi, Vittorio; Fuqua, Clay

2013-01-01

Studies of chemical signaling between plants and bacteria in the past have been largely confined to two models: the rhizobial-legume symbiotic association and pathogenesis between agrobacteria and their host plants. Recent studies are beginning to provide evidence that many plant-associated bacteria undergo chemical signaling with the plant host via low-molecular-weight compounds. Plant-produced compounds interact with bacterial regulatory proteins that then affect gene expression. Similarly, bacterial quorum-sensing signals result in a range of functional responses in plants. This review attempts to highlight current knowledge in chemical signaling that takes place between pathogenic bacteria and plants. This chemical communication between plant and bacteria, also referred to as interkingdom signaling, will likely become a major research field in the future, as it allows the design of specific strategies to create plants that are resistant to plant pathogens.

Status summary of chemical processing development in plutonium-238 supply program

Energy Technology Data Exchange (ETDEWEB)

Collins, Emory D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Benker, Dennis [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wham, Robert M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); DePaoli, David W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Delmau, Laetitia Helene [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sherman, Steven R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-10-01

This document summarizes the status of development of chemical processing in the Plutonium-238 Supply Program (PSP) near the end of Demonstration 1. The objective of the PSP is “to develop, demonstrate, and document a production process that meets program objectives and to prepare for its operation” (Frazier et al. 2016). Success in the effort includes establishing capability using the current infrastructure to produce Np targets for irradiation in Department of Energy research reactors, chemically processing the irradiated targets to separate and purify the produced Pu and transferring the PuO₂ product to Los Alamos National Laboratory (LANL) at an average rate of 1.5 kg/y.

Method of producing gaseous products using a downflow reactor

Science.gov (United States)

Cortright, Randy D; Rozmiarek, Robert T; Hornemann, Charles C

2014-09-16

Reactor systems and methods are provided for the catalytic conversion of liquid feedstocks to synthesis gases and other noncondensable gaseous products. The reactor systems include a heat exchange reactor configured to allow the liquid feedstock and gas product to flow concurrently in a downflow direction. The reactor systems and methods are particularly useful for producing hydrogen and light hydrocarbons from biomass-derived oxygenated hydrocarbons using aqueous phase reforming. The generated gases may find used as a fuel source for energy generation via PEM fuel cells, solid-oxide fuel cells, internal combustion engines, or gas turbine gensets, or used in other chemical processes to produce additional products. The gaseous products may also be collected for later use or distribution.

Surface chemical problems in coal flotation

Science.gov (United States)

Taylor, S. R.; Miller, K. J.; Deurbrouck, A. W.

1981-02-01

As the use of coal increases and more fine material is produced by mining and processing, the need for improved methods of coal beneficiation increases. While flotation techniques can help meet these needs, the technique is beset with many problems. These problems involve surface chemical and interfacial properties of the coal-mineral-water slurry systems used in coal flotation. The problems associated with coal flotation include non-selectivity, inefficient reagent utilization, and excessive variablity of results. These problems can be broadely classified as a lack of predictability. The present knowledge of coal flotation is not sufficient, in terms of surface chemical parameters, to allow prediction of the flotation response of a given coal. In this paper, some of the surface chemical properties of coal and coal minerals that need to be defined will be discussed in terms of the problems noted above and their impact on coal cleaning.

How to tackle chemical communication? Relative proportions versus semiquantitative determination of compounds in lizard chemical secretions.

Science.gov (United States)

García-Roa, Roberto; Sáiz, Jorge; Gómara, Belén; López, Pilar; Martín, José

2018-02-01

Knowledge about chemical communication in some vertebrates is still relatively limited. Squamates are a glaring example of this, even when recent evidences indicate that scents are involved in social and sexual interactions. In lizards, where our understanding of chemical communication has considerably progressed in the last few years, many questions about chemical interactions remain unanswered. A potential reason for this is the inherent complexity and technical limitations that some methodologies embody when analyzing the compounds used to convey information. We provide here a straightforward procedure to analyze lizard chemical secretions based on gas chromatography coupled to mass spectrometry that uses an internal standard for the semiquantification of compounds. We compare the results of this method with those obtained by the traditional procedure of calculating relative proportions of compounds. For such purpose, we designed two experiments to investigate if these procedures allowed revealing changes in chemical secretions 1) when lizards received previously a vitamin dietary supplementation or 2) when the chemical secretions were exposed to high temperatures. Our results show that the procedure based on relative proportions is useful to describe the overall chemical profile, or changes in it, at population or species levels. On the other hand, the use of the procedure based on semiquantitative determination can be applied when the target of study is the variation in one or more particular compounds of the sample, as it has proved more accurate detecting quantitative variations in the secretions. This method would reveal new aspects produced by, for example, the effects of different physiological and climatic factors that the traditional method does not show.

Potential of Palm Olein as Green Lubricant Source: Lubrication Analysis and Chemical Characterisation

International Nuclear Information System (INIS)

Darfizzi Derawi; Jumat Salimon

2014-01-01

Palm olein (PO o ) is widely used as edible oil in tropical countries. The lubrication properties and chemical compositions of PO o being considered to be used as renewable raw material for bio lubricant synthesis. PO o is suitable to be used directly as bio lubricant for medium temperature industrial applications. Palm olein has good viscosity index, oxidative stability, flash and fire point as a lubricant source. PO o contains unsaturated triacylglycerols (TAG): Palmitin-Olein-Olein, POO (33.3 %), Palmitin-Olein-Palmitin, POP (29.6 %), which are very important to produce good lubricant properties. This unsaturated bond is preferable in chemical modification to produce bio lubricant. The chemical compositions of PO o were tested by using high performance liquid chromatography (HPLC) and gas chromatography (GC) techniques. (author)

Direct aerosol chemical composition measurements to evaluate the physicochemical differences between controlled sea spray aerosol generation schemes

Directory of Open Access Journals (Sweden)

D. B. Collins

2014-11-01

Full Text Available Controlled laboratory studies of the physical and chemical properties of sea spray aerosol (SSA must be under-pinned by a physically and chemically accurate representation of the bubble-mediated production of nascent SSA particles. Bubble bursting is sensitive to the physico-chemical properties of seawater. For a sample of seawater, any important differences in the SSA production mechanism are projected into the composition of the aerosol particles produced. Using direct chemical measurements of SSA at the single-particle level, this study presents an intercomparison of three laboratory-based, bubble-mediated SSA production schemes: gas forced through submerged sintered glass filters ("frits", a pulsed plunging-waterfall apparatus, and breaking waves in a wave channel filled with natural seawater. The size-resolved chemical composition of SSA particles produced by breaking waves is more similar to particles produced by the plunging waterfall than those produced by sintered glass filters. Aerosol generated by disintegrating foam produced by sintered glass filters contained a larger fraction of organic-enriched particles and a different size-resolved elemental composition, especially in the 0.8–2 μm dry diameter range. Interestingly, chemical differences between the methods only emerged when the particles were chemically analyzed at the single-particle level as a function of size; averaging the elemental composition of all particles across all sizes masked the differences between the SSA samples. When dried, SSA generated by the sintered glass filters had the highest fraction of particles with spherical morphology compared to the more cubic structure expected for pure NaCl particles produced when the particle contains relatively little organic carbon. In addition to an intercomparison of three SSA production methods, the role of the episodic or "pulsed" nature of the waterfall method on SSA composition was under-taken. In organic

Waste management and chemical inventories

Energy Technology Data Exchange (ETDEWEB)

Gleckler, B.P.

1995-06-01

This section of the 1994 Hanford Site Environmental Report summarizes the classification and handling of waste at the Hanford Site. Waste produced at the Hanford Site is classified as either radioactive, nonradioactive, or mixed waste. Radioactive wastes are further categorized as transuranic, high-level, and low-level. Mixed waste may contain both radioactive and hazardous nonradioactive substances. This section describes waste management practices and chemical inventories at the site.

Waste management and chemical inventories

International Nuclear Information System (INIS)

Gleckler, B.P.

1995-01-01

This section of the 1994 Hanford Site Environmental Report summarizes the classification and handling of waste at the Hanford Site. Waste produced at the Hanford Site is classified as either radioactive, nonradioactive, or mixed waste. Radioactive wastes are further categorized as transuranic, high-level, and low-level. Mixed waste may contain both radioactive and hazardous nonradioactive substances. This section describes waste management practices and chemical inventories at the site

Microstructure and chemical bonding of DLC films deposited on ACM rubber by PACVD

NARCIS (Netherlands)

Martinez-Martinez, D.; Schenkel, M.; Pei, Y.T.; Sánchez-López, J.C.; Hosson, J.Th.M. De

2011-01-01

The microstructure and chemical bonding of DLC films prepared by plasma assisted chemical vapor deposition on acrylic rubber (ACM) are studied in this paper. The temperature variation produced by the ion impingement during plasma cleaning and subsequent film deposition was used to modify the film

Chemical ecology of insects and tritrophic interactions

International Nuclear Information System (INIS)

Ahmad, F.; Aslam, M.; Razaq, M.

2004-01-01

This paper reviews the chemical ecology of insects to explain the role of semiochemicals in plant-herbivore, herbivore-carnivore and plant-carnivore interactions. The semiochemical, mediating tritrophic interactions may be produced by plants, herbivores or their natural enemies (carnivores). Some semiochemicals attract the herbivores and carnivores and mediate interaction among them, while on the other hand some repel them. The semiochemicals are used by heribivores, parasites and predators as cues to locate food, host or prey. The same chemicals are also used for defensive purpose by some herbivores against their natural enemies as they are sequestered through their bodies. (author)

Utilization of inulin-containing waste in industrial fermentations to produce biofuels and bio-based chemicals.

Science.gov (United States)

Hughes, Stephen R; Qureshi, Nasib; López-Núñez, Juan Carlos; Jones, Marjorie A; Jarodsky, Joshua M; Galindo-Leva, Luz Ángela; Lindquist, Mitchell R

2017-04-01

Inulins are polysaccharides that belong to an important class of carbohydrates known as fructans and are used by many plants as a means of storing energy. Inulins contain 20 to several thousand fructose units joined by β-2,1 glycosidic bonds, typically with a terminal glucose unit. Plants with high concentrations of inulin include: agave, asparagus, coffee, chicory, dahlia, dandelion, garlic, globe artichoke, Jerusalem artichoke, jicama, onion, wild yam, and yacón. To utilize inulin as its carbon and energy source directly, a microorganism requires an extracellular inulinase to hydrolyze the glycosidic bonds to release fermentable monosaccharides. Inulinase is produced by many microorganisms, including species of Aspergillus, Kluyveromyces, Penicillium, and Pseudomonas. We review various inulinase-producing microorganisms and inulin feedstocks with potential for industrial application as well as biotechnological efforts underway to develop sustainable practices for the disposal of residues from processing inulin-containing crops. A multi-stage biorefinery concept is proposed to convert cellulosic and inulin-containing waste produced at crop processing operations to valuable biofuels and bioproducts using Kluyveromyces marxianus, Yarrowia lipolytica, Rhodotorula glutinis, and Saccharomyces cerevisiae as well as thermochemical treatments.

Brain levels of N-acylethanolamine phospholipids in mice during pentylenetetrazol-induced seizure

DEFF Research Database (Denmark)

Moesgaard, B.; Hansen, H.H.; Petersen, G.

2003-01-01

occur in response to seizure activity. Therefore, we investigated the effect of pentylenetetrazol (PTZ)-induced seizures in PTZ-kindled mice on the level of NAPE in the brain. Male NMRI mice were kindled with PTZ injections 3 times/wk, thereby developing clonic seizures in response to PTZ. Mice were...... killed within 30 min after the clonic seizure on the test day (12th injection) and the brains were collected. Eight species of NAPE were analyzed as the glycerophospho-N-acylethanolamines by high-performance liquid chromatography-coupled electrospray ionization mass spectrometry. No effect of the PTZ...... accumulate during seizure....

Chemical regulation of body feather microbiota in a wild bird.

Science.gov (United States)

Jacob, Staffan; Sallé, Louis; Zinger, Lucie; Chaine, Alexis S; Ducamp, Christine; Boutault, Léa; Russell, Andrew F; Heeb, Philipp

2018-04-01

The microbiota has a broad range of impacts on host physiology and behaviour, pointing out the need to improve our comprehension of the drivers of host-microbiota composition. Of particular interest is whether the microbiota is acquired passively, or whether and to what extent hosts themselves shape the acquisition and maintenance of their microbiota. In birds, the uropygial gland produces oily secretions used to coat feathers that have been suggested to act as an antimicrobial defence mechanism regulating body feather microbiota. However, our comprehension of this process is still limited. In this study, we for the first time coupled high-throughput sequencing of the microbiota of both body feathers and the direct environment (i.e., the nest) in great tits with chemical analyses of the composition of uropygial gland secretions to examine whether host chemicals have either specific effects on some bacteria or nonspecific broad-spectrum effects on the body feather microbiota. Using a network approach investigating the patterns of co-occurrence or co-exclusions between chemicals and bacteria within the body feather microbiota, we found no evidence for specific promicrobial or antimicrobial effects of uropygial gland chemicals. However, we found that one group of chemicals was negatively correlated to bacterial richness on body feathers, and a higher production of these chemicals was associated with a poorer body feather bacterial richness compared to the nest microbiota. Our study provides evidence that chemicals produced by the host might function as a nonspecific broad-spectrum antimicrobial defence mechanism limiting colonization and/or maintenance of bacteria on body feathers, providing new insight about the drivers of the host's microbiota composition in wild organisms. © 2018 John Wiley & Sons Ltd.

Converting chemical energy into electricity through a functionally cooperating device with diving-surfacing cycles.

Science.gov (United States)

Song, Mengmeng; Cheng, Mengjiao; Ju, Guannan; Zhang, Yajun; Shi, Feng

2014-11-05

A smart device that can dive or surface in aqueous medium has been developed by combining a pH-responsive surface with acid-responsive magnesium. The diving-surfacing cycles can be used to convert chemical energy into electricity. During the diving-surfacing motion, the smart device cuts magnetic flux lines and produces a current, demonstrating that motional energy can be realized by consuming chemical energy of magnesium, thus producing electricity. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Facts about food irradiation: Chemical changes in irradiated foods

International Nuclear Information System (INIS)

1991-01-01

This fact sheet addresses the safety of irradiated food. The irradiation process produces very little chemical change in food, and laboratory experiments have shown no harmful effects in animals fed with irradiated milk powder. 3 refs

Volume 10 No. 2 February 2010 2124 CHEMICAL COMPOSITION ...

African Journals Online (AJOL)

2010-02-02

Feb 2, 2010 ... Dept of Food Science and Post Harvest Technology, University of Hawassa, Ethiopia. 2. Department of Chemical ... Wine is an alcoholic beverage produced by the fermentation of the ..... Management, 2nd edition. Gaitherburg ...

Radioactivity in produced water from Norwegian oil and gas installations - concentrations, bioavailability and doses to marine biota

Energy Technology Data Exchange (ETDEWEB)

Sidhu, R.; Eriksen, D. Oe.; Straalberg, E.; Iden, K. I.; Rye, H.; Hylland, K.; Ruus, A.; Roeyset, O.; Berntssen, M. H. G.

2006-03-15

Substantial amounts of produced water, containing elevated levels of radionuclides (mainly 226Ra and 228Ra) are discharged to the sea as a result of oil and gas production on the Norwegian Continental Shelf. So far no study has assessed the potential radiological effects on marine biota in connection with radionuclide discharges to the North Sea. The main objective of the project is to establish radiological safe discharge limits for radium, lead and polonium associated with other components in produced water from oil and gas installations on the Norwegian continental shelf. Preliminary results indicate that presence of added chemicals such as scale inhibitors in the produced water has a marked influence on the formation of radium and barium sulphates when produced water is mixed with sea water. Thus, the mobility and bio-availability of radium (and barium) may be larger than anticipated. Also, the bio-availability of radium may be increased due to presence of such chemicals, and this is presently being studied. (author) (tk)

Photoluminescence of nc-Si:Er thin films obtained by physical and chemical vapour deposition techniques: The effects of microstructure and chemical composition

Energy Technology Data Exchange (ETDEWEB)

Cerqueira, M.F., E-mail: fcerqueira@fisica.uminho.p [Departamento de Fisica, Universidade do Minho, Campus de Gualtar 4710-057 Braga (Portugal); Losurdo, M. [Institute of Inorganic Methodologies and of Plasmas, IMIP-CNR, Via Orabona n.4-70126 Bari (Italy); Stepikhova, M. [Institute for Physics of Microstructures RAS, 603600 Nizhnij Novgorod GSP-105 (Russian Federation); Alpuim, P.; Andres, G. [Departamento de Fisica, Universidade do Minho, Campus de Gualtar 4710-057 Braga (Portugal); Kozanecki, A. [Polish Academy of Sciences, Institute of Physics, PL-02668, Warsaw (Poland); Soares, M.J.; Peres, M. [Departamento de Fisica, Universidade de Aveiro, Campus de Santiago, 3700 Aveiro (Portugal)

2009-08-31

Erbium doped nanocrystalline silicon (nc-Si:Er) thin films were produced by reactive magnetron rf sputtering and by Er ion implantation into chemical vapor deposited Si films. The structure and chemical composition of films obtained by the two approaches were studied by micro-Raman scattering, spectroscopic ellipsometry and Rutherford backscattering techniques. Variation of deposition parameters was used to deposit films with different crystalline fraction and crystallite size. Photoluminescence measurements revealed a correlation between film microstructure and the Er{sup 3+} photoluminescence efficiency.

Radiation treatment of toxic chemicals

International Nuclear Information System (INIS)

Lee, M.J.; Jung, I.H.; Jo, S.K.

2010-01-01

Polychlorinated biphenyls (PCBs) were commercially produced from 1920s as complex mixtures containing multiple isomers for a variety of applications. They are very toxic, chemically stable and resist microbial, photochemical, chemical, and thermal degradation. The public, legal, and scientific concerns about PCBs arose from research indicating they were environmental contaminants that had a potential to adversely impact the environment, and, therefore, were undesirable as commercial products. Eventually, most producers reduced or stopped production of PCBs in the 1970s. Stockholm convention on POPs (Persistent Organic Pollutants), which was effective on May 2004 and 151 nations including Korea were joined on June 2005, asked to dispose of PCBs by 2028 with environmental friendly methods. Korean government also has declared to conduct by 2015. According to the Environmental law of Korea, over 2 ppm of PCBs has to be decomposed by legal methods of incineration and thermal destruction. But those are inapplicable owing to the environmental groups. KAERI(Korea Atomic Energy Research Institute) has recently developed a remarkable technology for radiation treatment of toxic chemicals including chlorides using an electron beam accelerator. Electron beam accelerator of 2.5 MeV energy and 100 kW power capacity was used to decompose of PCBs having been used as a commercial transformer oil for more than 30 years. The oil were irradiated with ∼ 0.1 percent of TEA (Triethyl Amin) to make chloride ion aparted off from the PCBs into precipitate at the conditions of normal temperature and pressure. The concentrations of PCBs were measured by GC (Gas Chromatography) with ECD (Electron Capture Detector) following the KS (Korean Standard) test procedure. Electron beam should be a useful tool for environmental conservation. Residual concentrations of PCBs after irradiation were depended on the absorption dose of electron beam energy. Advantages comparing to other methods such as

Chemical scissors cut phosphorene nanostructures

International Nuclear Information System (INIS)

Peng, Xihong; Wei, Qun

2014-01-01

Phosphorene, a recently fabricated two-dimensional puckered honeycomb structure of phosphorus, showed promising properties for applications in nano-electronics. In this work, we report a chemical scissors effect on phosphorene, using first-principles method. It was found that chemical species, such as H, OH, F, and Cl, can act as scissors to cut phosphorene. Phosphorus nanochains and nanoribbons can be obtained. The scissors effect results from the strong bonding between the chemical species and phosphorus atoms. Other species such as O, S and Se fail to cut phosphorene nanostructures due to their weak bonding with phosphorus. The electronic structures of the produced P-chains reveal that the hydrogenated chain is an insulator while the pristine chain is a one-dimensional Dirac material, in which the charge carriers are massless fermions travelling at an effective speed of light ∼8 × 10 5 m s −1 . The obtained zigzag phosphorene nanoribbons show either metallic or semiconducting behaviors, depending on the treatment of the edge phosphorus atoms. (paper)

Biocatalysis for Biobased Chemicals

Science.gov (United States)

de Regil, Rubén; Sandoval, Georgina

2013-01-01

The design and development of greener processes that are safe and friendly is an irreversible trend that is driven by sustainable and economic issues. The use of Biocatalysis as part of a manufacturing process fits well in this trend as enzymes are themselves biodegradable, require mild conditions to work and are highly specific and well suited to carry out complex reactions in a simple way. The growth of computational capabilities in the last decades has allowed Biocatalysis to develop sophisticated tools to understand better enzymatic phenomena and to have the power to control not only process conditions but also the enzyme’s own nature. Nowadays, Biocatalysis is behind some important products in the pharmaceutical, cosmetic, food and bulk chemicals industry. In this review we want to present some of the most representative examples of industrial chemicals produced in vitro through enzymatic catalysis. PMID:24970192

Imaging Molecular Motion: Femtosecond X-Ray Scattering of an Electrocyclic Chemical Reaction

Science.gov (United States)

Minitti, M. P.; Budarz, J. M.; Kirrander, A.; Robinson, J. S.; Ratner, D.; Lane, T. J.; Zhu, D.; Glownia, J. M.; Kozina, M.; Lemke, H. T.; Sikorski, M.; Feng, Y.; Nelson, S.; Saita, K.; Stankus, B.; Northey, T.; Hastings, J. B.; Weber, P. M.

2015-06-01

Structural rearrangements within single molecules occur on ultrafast time scales. Many aspects of molecular dynamics, such as the energy flow through excited states, have been studied using spectroscopic techniques, yet the goal to watch molecules evolve their geometrical structure in real time remains challenging. By mapping nuclear motions using femtosecond x-ray pulses, we have created real-space representations of the evolving dynamics during a well-known chemical reaction and show a series of time-sorted structural snapshots produced by ultrafast time-resolved hard x-ray scattering. A computational analysis optimally matches the series of scattering patterns produced by the x rays to a multitude of potential reaction paths. In so doing, we have made a critical step toward the goal of viewing chemical reactions on femtosecond time scales, opening a new direction in studies of ultrafast chemical reactions in the gas phase.

Chemical leasing in the context of sustainable chemistry.

Science.gov (United States)

Moser, Frank; Karavezyris, Vassilios; Blum, Christopher

2015-05-01

Chemical leasing is a new and innovative approach of selling chemicals. It aims at reducing the risks emanating from hazardous substances and ensuring long-term economic success within a global system of producing and using chemicals. This paper explores how, through chemical leasing, the consumption of chemicals, energy, resources and the generation of related wastes can be reduced. It also analyses the substitution of hazardous chemicals as a tool to protect environmental, health and safety and hence ensure compliance with sustainability criteria. For this, we are proposing an evaluation methodology that seeks to provide an answer to the following research questions: (1) Does the application of chemical leasing promote sustainability in comparison to an existing chemicals production and management system? 2. If various chemical leasing project types are envisaged, which is the most promising in terms of sustainability? The proposed methodology includes a number of basic goals and sub-goals to assess the sustainability for eight different chemical leasing case studies that have been implemented both at the local and the national levels. The assessment is limited to the relative assessment of specific case studies and allows the comparisons of different projects in terms of their relative contribution to sustainable chemistry. The findings of our assessment demonstrate that chemical leasing can be regarded as promoting sustainable chemistry in five case studies with certainty. However, on the grounds of our assessment, we cannot conclude with certainty that chemical leasing has equivalent contribution to sustainable chemistry in respect of three further case studies.

The Dialectic: Not just the Absolute Recoil, but the World’s Living Fire that Extinguishes and Kindles Itself. Reflections on Slavoj Žižek’s Version of Dialectical Philosophy in "Absolute Recoil: Towards a New Foundation of Dialectical Materialism".

Directory of Open Access Journals (Sweden)

Christian Fuchs

2014-10-01

Full Text Available Slavoj Žižek shows in his book Absolute Recoil (and previous Hegelian works such as Less than Nothing the importance of repeating Hegel’s dialectical philosophy in contemporary capitalism. Žižek contributes especially to a reconceptualisation of dialectical logic and based on it the dialectic of history. The reflections in this paper stress that the dialectic is only the absolute recoil, a sublation that posits its own presuppositions, by working as a living fire that extinguishes and kindles itself. I point out that a new foundation of dialectical materialism needs a proper Heraclitusian foundation. I discuss Žižek’s version of the dialectic that stresses the absolute recoil and the logic of retroactivity and point out its implications for the concept of history as well as Žižek’s own theoretical ambiguities that oscillate between postmodern relativism and mechanical materialism. I argue that Žižek’s version of the dialectic should be brought into a dialogue with the dialectical philosophies of the German Marxists Hans Heinz Holz and Herbert Hörz. Žižek’s achievement is that he helps keeping alive the fire of dialectical materialism in the 21st century. Such a dialectical fire is needed for a proper revolutionary theory.

MRI of chemical reactions and processes.

Science.gov (United States)

Britton, Melanie M

2017-08-01

As magnetic resonance imaging (MRI) can spatially resolve a wealth of molecular information available from nuclear magnetic resonance (NMR), it is able to non-invasively visualise the composition, properties and reactions of a broad range of spatially-heterogeneous molecular systems. Hence, MRI is increasingly finding applications in the study of chemical reactions and processes in a diverse range of environments and technologies. This article will explain the basic principles of MRI and how it can be used to visualise chemical composition and molecular properties, providing an overview of the variety of information available. Examples are drawn from the disciplines of chemistry, chemical engineering, environmental science, physics, electrochemistry and materials science. The review introduces a range of techniques used to produce image contrast, along with the chemical and molecular insight accessible through them. Methods for mapping the distribution of chemical species, using chemical shift imaging or spatially-resolved spectroscopy, are reviewed, as well as methods for visualising physical state, temperature, current density, flow velocities and molecular diffusion. Strategies for imaging materials with low signal intensity, such as those containing gases or low sensitivity nuclei, using compressed sensing, para-hydrogen or polarisation transfer, are discussed. Systems are presented which encapsulate the diversity of chemical and physical parameters observable by MRI, including one- and two-phase flow in porous media, chemical pattern formation, phase transformations and hydrodynamic (fingering) instabilities. Lastly, the emerging area of electrochemical MRI is discussed, with studies presented on the visualisation of electrochemical deposition and dissolution processes during corrosion and the operation of batteries, supercapacitors and fuel cells. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

Laser studies of chemical reaction and collision processes

Energy Technology Data Exchange (ETDEWEB)

Flynn, G. [Columbia Univ., New York, NY (United States)

1993-12-01

This work has concentrated on several interrelated projects in the area of laser photochemistry and photophysics which impinge on a variety of questions in combustion chemistry and general chemical kinetics. Infrared diode laser probes of the quenching of molecules with {open_quotes}chemically significant{close_quotes} amounts of energy in which the energy transferred to the quencher has, for the first time, been separated into its vibrational, rotational, and translational components. Probes of quantum state distributions and velocity profiles for atomic fragments produced in photodissociation reactions have been explored for iodine chloride.

Journal of Chemical Sciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Journal of Chemical Sciences; Volume 123; Issue 5 ... to study the decay of the excited states and the fast reactions of photo produced ... Ruthenium(II) carbonyl complexes containing chalconates and triphenylphosphine/arsine ..... Diversity in electrochemical oxidation of dihydroxybenzenes in the presence ...

Excavation research with chemical explosives

Energy Technology Data Exchange (ETDEWEB)

Vandenberg, William E; Day, Walter C [U.S. Army Engineer Nuclear Cratering Group, Lawrence Radiation Laboratory, Livermore, CA (United States)

1970-05-01

The US Army Engineer Nuclear Cratering Group (NCG) is located at the Lawrence Radiation Laboratory in Livermore, California. NCG was established in 1962 and assigned responsibility for technical program direction of the Corps of Engineers Nuclear Excavation Research Program. The major part of the experimental program has been the execution of chemical explosive excavation experiments. In the past these experiments were preliminary to planned nuclear excavation experiments. The experience gained and technology developed in accomplishing these experiments has led to an expansion of NCG's research mission. The overall research and development mission now includes the development of chemical explosive excavation technology to enable the Corps of Engineers to more economically accomplish Civil Works Construction projects of intermediate size. The current and future chemical explosive excavation experiments conducted by NCG will be planned so as to provide data that can be used in the development of both chemical and nuclear excavation technology. In addition, whenever possible, the experiments will be conducted at the specific sites of authorized Civil Works Construction Projects and will be designed to provide a useful portion of the engineering structures planned in that project. Currently, the emphasis in the chemical explosive excavation program is on the development of design techniques for producing specific crater geometries in a variety of media. Preliminary results of two such experiments are described in this paper; Project Pre-GONDOLA III, Phase III, Reservoir Connection Experiment; and a Safety Calibration Series for Project TUGBOAT, a small boat harbor excavation experiment.

Excavation research with chemical explosives

International Nuclear Information System (INIS)

Vandenberg, William E.; Day, Walter C.

1970-01-01

The US Army Engineer Nuclear Cratering Group (NCG) is located at the Lawrence Radiation Laboratory in Livermore, California. NCG was established in 1962 and assigned responsibility for technical program direction of the Corps of Engineers Nuclear Excavation Research Program. The major part of the experimental program has been the execution of chemical explosive excavation experiments. In the past these experiments were preliminary to planned nuclear excavation experiments. The experience gained and technology developed in accomplishing these experiments has led to an expansion of NCG's research mission. The overall research and development mission now includes the development of chemical explosive excavation technology to enable the Corps of Engineers to more economically accomplish Civil Works Construction projects of intermediate size. The current and future chemical explosive excavation experiments conducted by NCG will be planned so as to provide data that can be used in the development of both chemical and nuclear excavation technology. In addition, whenever possible, the experiments will be conducted at the specific sites of authorized Civil Works Construction Projects and will be designed to provide a useful portion of the engineering structures planned in that project. Currently, the emphasis in the chemical explosive excavation program is on the development of design techniques for producing specific crater geometries in a variety of media. Preliminary results of two such experiments are described in this paper; Project Pre-GONDOLA III, Phase III, Reservoir Connection Experiment; and a Safety Calibration Series for Project TUGBOAT, a small boat harbor excavation experiment

Synthesis of graphene platelets by chemical and electrochemical route

Energy Technology Data Exchange (ETDEWEB)

Ramachandran, Rajendran; Felix, Sathiyanathan [Centre for Nanotechnology Research, VIT University, Vellore 632014, Tamil Nadu (India); Joshi, Girish M. [Materials Physics Division, School of Advanced Sciences, VIT University, Vellore 632014, Tamil Nadu (India); Raghupathy, Bala P.C., E-mail: balapraveen2000@yahoo.com [Centre for Nanotechnology Research, VIT University, Vellore 632014, Tamil Nadu (India); Research and Advanced Engineering Division (Materials), Renault Nissan Technology and Business Center India (P) Ltd., Chennai, Tamil Nadu (India); Jeong, Soon Kwan, E-mail: jeongsk@kier.re.kr [Climate Change Technology Research Division, Korea Institute of Energy Research, Yuseong-gu, Daejeon 305-343 (Korea, Republic of); Grace, Andrews Nirmala, E-mail: anirmalagrace@vit.ac.in [Centre for Nanotechnology Research, VIT University, Vellore 632014, Tamil Nadu (India); Climate Change Technology Research Division, Korea Institute of Energy Research, Yuseong-gu, Daejeon 305-343 (Korea, Republic of)

2013-10-15

Graphical abstract: A schematic showing the overall reduction process of graphite to reduced graphene platelets by chemical and electrochemical route. - Highlights: • Graphene was prepared by diverse routes viz. chemical and electrochemical methods. • NaBH{sub 4} was effective for removing oxygen functional groups from graphene oxide. • Sodium borohydride reduced graphene oxide (SRGO) showed high specific capacitance. • Electrochemical rendered a cheap route for production of graphene in powder form. - Abstract: Graphene platelets were synthesized from graphene oxide by chemical and electrochemical route. Under the chemical method, sodium borohydride and hydrazine chloride were used as reductants to produce graphene. In this paper, a novel and cost effective electrochemical method, which can simplify the process of reduction on a larger scale, is demonstrated. The electrochemical method proposed in this paper produces graphene in powder form with good yield. The atomic force microscopic images confirmed that the graphene samples prepared by all the routes have multilayers of graphene. The electrochemical process provided a new route to make relatively larger area graphene sheets, which will have interest for further patterning applications. Attempt was made to quantify the quantum of reduction using cyclic voltammetry and choronopotentiometry techniques on reduced graphene samples. As a measure in reading the specific capacitance values, a maximum specific capacitance value of 265.3 F/g was obtained in sodium borohydride reduced graphene oxide.

Synthesis of graphene platelets by chemical and electrochemical route

International Nuclear Information System (INIS)

Ramachandran, Rajendran; Felix, Sathiyanathan; Joshi, Girish M.; Raghupathy, Bala P.C.; Jeong, Soon Kwan; Grace, Andrews Nirmala

2013-01-01

Graphical abstract: A schematic showing the overall reduction process of graphite to reduced graphene platelets by chemical and electrochemical route. - Highlights: • Graphene was prepared by diverse routes viz. chemical and electrochemical methods. • NaBH 4 was effective for removing oxygen functional groups from graphene oxide. • Sodium borohydride reduced graphene oxide (SRGO) showed high specific capacitance. • Electrochemical rendered a cheap route for production of graphene in powder form. - Abstract: Graphene platelets were synthesized from graphene oxide by chemical and electrochemical route. Under the chemical method, sodium borohydride and hydrazine chloride were used as reductants to produce graphene. In this paper, a novel and cost effective electrochemical method, which can simplify the process of reduction on a larger scale, is demonstrated. The electrochemical method proposed in this paper produces graphene in powder form with good yield. The atomic force microscopic images confirmed that the graphene samples prepared by all the routes have multilayers of graphene. The electrochemical process provided a new route to make relatively larger area graphene sheets, which will have interest for further patterning applications. Attempt was made to quantify the quantum of reduction using cyclic voltammetry and choronopotentiometry techniques on reduced graphene samples. As a measure in reading the specific capacitance values, a maximum specific capacitance value of 265.3 F/g was obtained in sodium borohydride reduced graphene oxide

DOMESTIC BUTANOL-PRODUCING STRAINS OF THE Clostridium GENUS

Directory of Open Access Journals (Sweden)

O. O. Tigunova

2017-02-01

Full Text Available The aim of the work was to summarize the results of own research concerning obtaining butanol producing strains of Clostridium genus, to identify them by physiological, morphological and genetic methods. Further study of characteristics and biological features of the strains, and various approaches in biotechnological process of butanol production are discussed. The work includes methods to increase butanol accumulation by producer strains. Perspectives of using chemical mutagenesis in Clostridia as a method of increasing butanol production are considered. The feasibility of using non-food raw material as a substrate for fermentation is discussed. Different methods of pretreatment and their impact on the accumulation of butanol in the liquid medium are compared. Butanol accumulation is shown to increase significantly if the synthesis precursors are added as components of enzymatic medium, and the “reverse bard” is used to reduce waste production without affecting the level of butanol synthesis. The problem of conservation of producing strains is given, and protective medium for microorganisms during the freeze-drying is defined.

Chemical reactivities of some interstellar molecules

Energy Technology Data Exchange (ETDEWEB)

Chadha, M S

1980-01-01

Work in the area of chemical evolution during the last 25 years has revealed the formation of a large number of biologically important molecules produced from simple starting materials under relatively simple experimental conditions. Much of this work has resulted from studies under atmospheres simulating that of the primitive earth or other planets. During the last decade, progress has also been made in the identification of chemical constituents of interstellar medium. A number of these molecules are the same as those identified in laboratory experiments. Even though the conditions of the laboratory experiments are vastly different from those of the cool, low-density interstellar medium, some of the similarities in composition are too obvious to go unnoticed. The present paper highlights some of the similarities in the composition of prebiotic molecules and those discovered in the interstellar medium. Also the chemical reactions which some of the common molecules e.g., NH3, HCN, H2CO, HC(triple bond)-C-CN etc. can undergo are surveyed.

Training small producers in Good Manufacturing Practices for the development of goat milk cheese

Directory of Open Access Journals (Sweden)

Adriana Noemí RAMÓN

Full Text Available Abstract Training in Good Manufacturing Practices enhances quality during food processing. This paper evaluates GMP training aimed at improving the chemical, sensory and microbiological quality of goat milk cheese. We worked with 26 families that produce cheese as their main source of income. Semi-structured interviews and observation were conducted to select relevant topics. The manufacturing processes were compared and samples were analyzed before and after GMP training. We trained 80% of the producers. Before receiving training, they used to make cheese from raw milk in unhygienic conditions and with little equipment. The products obtained had bad sensory characteristics, cracks, eyes on the pasta, a high number of aerobic mesophilic bacteria and total coliforms. After training, the producers pasteurized the milk and standardized processing procedures, resulting in final products that contained higher protein and calcium content, suitable sensory characteristics, and a significant reduction in microorganisms, with total coliforms falling to ≤ 5.103 UFC/g. Therefore, this study shows that the manufacturing process and the chemical, sensory and microbiological parameters of goat milk cheese improved after GMP training.

Social context influences chemical communication in D. melanogaster males.

Science.gov (United States)

Kent, Clement; Azanchi, Reza; Smith, Ben; Formosa, Amanda; Levine, Joel D

2008-09-23

Chemical communication mediates social interactions in insects. For the fruit fly, D. melanogaster, the chemical display is a key fitness trait because it leads to mating. An exchange of cues that resembles a dialogue between males and females is enacted by pheromones, chemical signals that pass between individual flies to alter physiology and behavior. Chemical signals also affect the timing of locomotor activity and sleep. We investigated genetic and environmental determinants of chemical communication. To evaluate the role of the social environment, we extracted a chemical blend from individual males selected from groups composed of one genotype and compared these extracts to those from groups of mixed genotypes. To evaluate the role of the physical environment, these comparisons were performed under a light-dark cycle or in constant darkness. Here, we show that chemical signaling is affected by the social environment, light-dark cycle, and genotype as well as the complex interplay of these variables. Gene-by-environment interactions produce highly significant effects on chemical signaling. We also examined individual responses within the groups. Strikingly, the response of one wild-type fly to another is modulated by the genotypic composition of his neighbors. Chemical signaling in D. melanogaster may be a "fickle" trait that depends on the individual's social background.

Development of Green and Sustainable Chemical Reactions

DEFF Research Database (Denmark)

Taarning, Esben

Abstract This thesis entitled Development of Green and Sustainable Chemical Reactions is divided into six chapters involving topics and projects related to green and sustainable chemistry. The chapters can be read independently, however a few concepts and some background information is introduced...... as well as the possibility for establishing a renewable chemical industry is discussed. The development of a procedure for using unsaturated aldehydes as olefin synthons in the Diels- Alder reaction is described in chapter three. This procedure affords good yields of the desired Diels- Alder adducts...... in chapter one and two which can be helpful to know when reading the subsequent chapters. The first chapter is an introduction into the fundamentals of green and sustainable chemistry. The second chapter gives an overview of some of the most promising methods to produce value added chemicals from biomass...

Hypothalamic digoxin, hemispheric chemical dominance, and eating behavior.

Science.gov (United States)

Kurup, Ravi Kumar; Kurup, Parameswara Achutha

2003-08-01

The isoprenoid pathway produces an endogenous membrane Na+-K+ ATPase inhibitor, digoxin, which can regulate neurotransmitter and amino acid transport. Digoxin synthesis and neurotransmitter patterns were assessed in eating disorders. The patterns were compared in those with right hemispheric and left hemispheric dominance. The serum HMG CoA reductase activity, RBC membrane Na+-K+ ATPase activity, serum digoxin, magnesium, tryptophan catabolites (serotonin, quinolinic acid, strychnine, and nicotine), and tyrosine catabolites (morphine, dopamine, and noradrenaline) were measured in anorexia nervosa, bulimia nervosa, right hemispheric dominant, left hemispheric dominant, and bihemispheric dominant individuals. Digoxin synthesis was increased with upregulated tryptophan catabolism and downregulated tyrosine catabolism in those with anorexia nervosa and right hemispheric chemical dominance. Digoxin synthesis was reduced with downregulated tryptophan catabolism and upregulated tyrosine catabolism in those with bulimia nervosa and left hemispheric chemical dominance. The membrane Na+-K+ ATPase activity and serum magnesium were decreased in anorexia nervosa and right hemispheric chemical dominance while they were increased in bulimia nervosa and left hemispheric chemical dominance. Hypothalamic digoxin and hemispheric chemical dominance play a central role in the regulation of eating behavior. Anorexia nervosa represents the right hemispheric chemically dominant/hyperdigoxinemic state and bulimia nervosa the left hemispheric chemically dominant/hypodigoxinemic state.

Bigger, Brighter, Bluer-Better?Current light-emitting devices- adverse sleep properties and preventative strategies.

Directory of Open Access Journals (Sweden)

Paul eGringras

2015-10-01

Full Text Available ObjectiveIn an effort to enhance the efficiency, brightness and contrast of light-emitting (LE devices during the day, displays often generate substantial short-wavelength (blue-enriched light emissions that can adversely affect sleep. We set out to verify the extent of such short-wavelength emissions, produced by a tablet (iPad Air, e-reader (Kindle Paperwhite 1st generation and smartphone (iPhone 5s and to determine the impact of strategies designed to reduce these light emissions. SettingUniversity of Surrey dedicated chronobiology facility.MethodsFirstly, the spectral power of all the light-emitting (LE devices was assessed when displaying identical text. Secondly, we compared the text output with that of ‘Angry Birds’-a popular top 100 ‘App Store’ game. Finally we measured the impact of two strategies that attempt to reduce the output of short-wavelength light emissions. The first strategy employed an inexpensive commercially available pair of orange-tinted ‘blue-blocking’ glasses. The second tested an app designed to be ‘sleep-aware’ whose designers deliberately attempted to reduce blue-enriched light emissions.ResultsAll the LE devices shared very similar enhanced blue-light peaks when displaying text. This included the output from the backlit Kindle Paperwhite device. The spectra when comparing text to the Angry Birds game were also very similar, although the

Low-frequency electromagnetic measurements as a zero-time discriminant of nuclear and chemical explosions - OSI research final report

International Nuclear Information System (INIS)

Sweeney, J.J.

1996-12-01

This is the final report on a series of investigations of low frequency (1-40 Hz) electromagnetic signals produced by above ground and underground chemical explosions and their use for confidence building under the Comprehensive Test-Ban Treaty. I conclude that low frequency electromagnetic measurements can be a very powerful tool for zero-time discrimination of chemical and nuclear explosions for yields of 1 Kt or greater, provided that sensors can be placed within 1-2 km of the suspected detonation point in a tamper-proof, low noise environment. The report includes descriptions and analyses of low frequency electromagnetic measurements associated with chemical explosions carried out in a variety of settings (shallow borehole, open pit mining, underground mining). I examine cavity pressure data from the Non-Proliferation Experiment (underground chemical explosion) and present the hypothesis that electromagnetic signals produced by underground chemical explosions could be produced during rock fracturing. I also review low frequency electromagnetic data from underground nuclear explosions acquired by Lawrence Livermore National Laboratory during the late 1980s. (author)

Chemical evaluation of chars produced by thermochemical conversion (gasification, pyrolysis and hydrothermal carbonization) of agro-industrial biomass on a commercial scale

International Nuclear Information System (INIS)

Wiedner, Katja; Rumpel, Cornelia; Steiner, Christoph; Pozzi, Alessandro; Maas, Robert; Glaser, Bruno

2013-01-01

Technologies for agro-industrial feedstock utilization such as pyrolysis, gasification and hydrothermal carbonization at industrial scale develop rapidly. The thermochemically converted biomasses of these production technologies have fundamentally different properties controlled by the production technology. This is reflected by general properties such as pH or elemental composition. The 13 C NMR spectroscopy, scanning electron microscopy and energy-dispersive X-ray spectroscopy and black carbon results confirmed these observations showing that hydrochars have lower proportions of aromatic compounds than biochars (less stable) but are rich in functional groups (higher cation exchange capacity) than biochars. Analyses of pollutants indicate that polycyclic aromatic hydrocarbons as well as dioxin contents of most samples were under the threshold values recommended by International Biochar Initiative and European Biochar Certificate. In conclusion, biochars and hydrochars are entirely different from each other and these materials will probably have a complementary reaction in a soil environment. -- Highlights: • Production technologies influences fundamentally chemical properties of chars. • Carbonized materials have different behaviour in soil environment. • Environmental risk of chars is low with respect to PAH and dioxin contents. • Certification standard for biochars is not suitable for hydrochars. • Commercial scale reactors are able to produce high quality biochars according to the regulations of the EBC or IBI

Insulin-producing Cells from Adult Human Bone Marrow Mesenchymal Stromal Cells Could Control Chemically Induced Diabetes in Dogs: A Preliminary Study.

Science.gov (United States)

Gabr, Mahmoud M; Zakaria, Mahmoud M; Refaie, Ayman F; Ismail, Amani M; Khater, Sherry M; Ashamallah, Sylvia A; Azzam, Maha M; Ghoneim, Mohamed A

2018-01-01

Ten mongrel dogs were used in this study. Diabetes was chemically induced in 7 dogs, and 3 dogs served as normal controls. For each diabetic dog, 5 million human bone marrow-derived mesenchymal stem cells/kg were differentiated to form insulin-producing cells using a trichostatin-based protocol. Cells were then loaded in 2 TheraCyte capsules which were transplanted under the rectus sheath. One dog died 4 d postoperatively from pneumonia. Six dogs were followed up with for 6 to 18 mo. Euglycemia was achieved in 4 dogs. Their glucose tolerance curves exhibited a normal pattern demonstrating that the encapsulated cells were glucose sensitive and insulin responsive. In the remaining 2 dogs, the fasting blood sugar levels were reduced but did not reach normal values. The sera of all transplanted dogs contained human insulin and C-peptide with a negligible amount of canine insulin. Removal of the transplanted capsules was followed by prompt return of diabetes. Intracytoplasmic insulin granules were seen by immunofluorescence in cells from the harvested capsules. Furthermore, all pancreatic endocrine genes were expressed. This study demonstrated that the TheraCyte capsule or a similar device can provide adequate immunoisolation, an important issue when stem cells are considered for the treatment of type 1 diabetes mellitus.

Chemical reactor for converting a first material into a second material

Science.gov (United States)

Kong, Peter C

2012-10-16

A chemical reactor and method for converting a first material into a second material is disclosed and wherein the chemical reactor is provided with a feed stream of a first material which is to be converted into a second material; and wherein the first material is combusted in the chemical reactor to produce a combustion flame, and a resulting gas; and an electrical arc is provided which is passed through or superimposed upon the combustion flame and the resulting gas to facilitate the production of the second material.

pyJac: Analytical Jacobian generator for chemical kinetics

Science.gov (United States)

Niemeyer, Kyle E.; Curtis, Nicholas J.; Sung, Chih-Jen

2017-06-01

Accurate simulations of combustion phenomena require the use of detailed chemical kinetics in order to capture limit phenomena such as ignition and extinction as well as predict pollutant formation. However, the chemical kinetic models for hydrocarbon fuels of practical interest typically have large numbers of species and reactions and exhibit high levels of mathematical stiffness in the governing differential equations, particularly for larger fuel molecules. In order to integrate the stiff equations governing chemical kinetics, generally reactive-flow simulations rely on implicit algorithms that require frequent Jacobian matrix evaluations. Some in situ and a posteriori computational diagnostics methods also require accurate Jacobian matrices, including computational singular perturbation and chemical explosive mode analysis. Typically, finite differences numerically approximate these, but for larger chemical kinetic models this poses significant computational demands since the number of chemical source term evaluations scales with the square of species count. Furthermore, existing analytical Jacobian tools do not optimize evaluations or support emerging SIMD processors such as GPUs. Here we introduce pyJac, a Python-based open-source program that generates analytical Jacobian matrices for use in chemical kinetics modeling and analysis. In addition to producing the necessary customized source code for evaluating reaction rates (including all modern reaction rate formulations), the chemical source terms, and the Jacobian matrix, pyJac uses an optimized evaluation order to minimize computational and memory operations. As a demonstration, we first establish the correctness of the Jacobian matrices for kinetic models of hydrogen, methane, ethylene, and isopentanol oxidation (number of species ranging 13-360) by showing agreement within 0.001% of matrices obtained via automatic differentiation. We then demonstrate the performance achievable on CPUs and GPUs using py

EVALUATION OF CEMENT-BONDED PARTICLE BOARD PRODUCED FROM AFZELIA AFRICANA WOOD RESIDUES

Directory of Open Access Journals (Sweden)

OLUFEMI A. SOTANNDE

2012-12-01

Full Text Available The study was design to evaluate the physical and mechanical properties of cement-bonded particleboards produced from Afzelia africana wood residues. The production variables investigated were three wood particle types (flakes, flake-sawdust mix and sawdust, three chemical accelerators (CaCl2, MgCl2 and AlCl3 and four wood-cement ratios (1:2.0, 1:2.5, 1:3.0 and 1:3.5. The accelerators were based on 2% by weight of cement used. The boards produced were subjected to physical tests such as density, percentage water absorption and thickness swelling. Mechanical properties evaluated were modulus of rupture, internal bonding strength and compressive strength. The results revealed that the type of particle used, wood-cement ratio and chemical additives had a marked influence on the physical and mechanical properties of the boards (p < 0.05. From quality view point, flake-sawdust composite ranked best while flake boards ranked least. Similarly, CaCl2 had the best influence on the setting of the boards followed by MgCl2 and AlCl3. Finally, it has been shown that particle boards that satisfied the BISON type HZ requirement and ISO 8335 can be produced from Afzelia africana particularly at wood-cement of 1:2.5 and above.

Chemical production from waste carbon monoxide: its potential for energy conservation

Energy Technology Data Exchange (ETDEWEB)

Rohrmann, C.A.; Schiefelbein, G.F.; Molton, P.M.; Li, C.T.; Elliott, D.C.; Baker, E.G.

1977-11-01

Results of a study of the potential for energy conservation by producing chemicals from by-product or waste carbon monoxide (CO) from industrial sources are summarized. Extensive compilations of both industrial sources and uses for carbon monoxide were developed and included. Reviews of carbon monoxide purification and concentration technology and preliminary economic evaluations of carbon monoxide concentration, pipeline transportation and utilization of CO in the synthesis of ammonia and methanol are included. Preliminary technical and economic feasibility studies were made of producing ammonia and methanol from the by-product CO produced by a typical elemental phosphorus plant. Methanol synthesis appears to be more attractive than ammonia synthesis when using CO feedstock because of reduced water gas shift and carbon dioxide removal requirements. The economic studies indicate that methanol synthesis from CO appears to be competitive with conventional technology when the price of natural gas exceeds $0.82/million Btu, while ammonia synthesis from CO is probably not competitive until the price of natural gas exceeds $1.90/million Btu. It is concluded that there appears to be considerable potential for energy conservation in the chemical industry, by collecting CO rather than flaring it, and using it to make major chemicals such as ammonia and methanol.

Chemical behaviour of plutonium in aqueous chloride solutions

International Nuclear Information System (INIS)

Bueppelmann, K.; Kim, J.I.

1988-06-01

The chemical behaviour of Plutonium has been investigated in concentrated NaCl solutions in the neutral pH range. The α-radiation induced radiolysis reactions oxidize the Cl - -ion to Cl 2 , HClO, ClO - and other species, which produce a strongly oxidizing medium. Under these conditions the Pu ions of lower oxidation states are readily oxidized to Pu(VI), which then undergo depending on the pH of the solution, various chemical reactions to produce PuO 2 Cl n , PuO 2 (ClO) m or PuO 2 (OH) x species. In addition to primary radiolysis reactions taking place in NaCl solutions, the reactions leading to the PuO 2 (Cl) n and PuO 2 (ClO) m species have been characterized and quantified systematically by spectroscopic and thermodynamic evaluation. The redox and complexation reactions of Pu ions under varying NaCl concentration, specific α-activity and pH are discussed. (orig.) [de

Assessing chemical exposure and ecological impacts of environmental surface waters using cell culture-based metabolomic

Science.gov (United States)

Waste water treatment plants (WWTPs), as well as industrial and agricultural operations release complex mixtures of anthropogenic chemicals that negatively affect surface water quality. Previous studies have shown that exposure to such complex chemical mixtures can produce adver...

Predicting allergic contact dermatitis: a hierarchical structure activity relationship (SAR) approach to chemical classification using topological and quantum chemical descriptors

Science.gov (United States)

Basak, Subhash C.; Mills, Denise; Hawkins, Douglas M.

2008-06-01

A hierarchical classification study was carried out based on a set of 70 chemicals—35 which produce allergic contact dermatitis (ACD) and 35 which do not. This approach was implemented using a regular ridge regression computer code, followed by conversion of regression output to binary data values. The hierarchical descriptor classes used in the modeling include topostructural (TS), topochemical (TC), and quantum chemical (QC), all of which are based solely on chemical structure. The concordance, sensitivity, and specificity are reported. The model based on the TC descriptors was found to be the best, while the TS model was extremely poor.

Process Design and Evaluation for Chemicals Based on Renewable Resources

DEFF Research Database (Denmark)

Fu, Wenjing

. In addition, another characteristic of chemicals based on renewable feedstocks is that many alternative technologies and possible routes exist, resulting in many possible process flowsheets. The challenge for process engineers is then to choose between possible process routes and alternative technologies...... development of chemicals based on renewable feedstocks. As an example, this thesis especially focuses on applying the methodology in process design and evaluation of the synthesis of 5-hydroxymethylfurfural (HMF) from the renewable feedstock glucose/fructose. The selected example is part of the chemoenzymatic......One of the key steps in process design is choosing between alternative technologies, especially for processes producing bulk and commodity chemicals. Recently, driven by the increasing oil prices and diminishing reserves, the production of bulk and commodity chemicals from renewable feedstocks has...

Identification and structural characterization of serobactins, a suite of lipopeptide siderophores produced by the grass endophyte Herbaspirillum seropedicae.

Science.gov (United States)

Rosconi, Federico; Davyt, Danilo; Martínez, Verónica; Martínez, Marcela; Abin-Carriquiry, Juan Andrés; Zane, Hannah; Butler, Alison; de Souza, Emanuel M; Fabiano, Elena

2013-03-01

Herbaspirillum seropedicae Z67 is a diazotrophic endophyte able to colonize the interior of many economically relevant crops such as rice, wheat, corn and sorghum. Structures of siderophores produced by bacterial endophytes have not yet been elucidated. The aim of this work was to identify and characterize the siderophores produced by this bacterium. In a screening for mutants unable to produce siderophores we found a mutant that had a transposon insertion in a non-ribosomal peptide synthase (NRPS) gene coding for a putative siderophore biosynthetic enzyme. The chemical structure of the siderophore was predicted using computational genomic tools. The predicted structure was confirmed by chemical analysis. We found that siderophores produced by H. seropedicae Z67 are a suite of amphiphilic lipopeptides, named serobactin A, B and C, which vary by the length of the fatty acid chain. We also demonstrated the biological activity of serobactins as nutritional iron sources for H. seropedicae. These are the first structurally described siderophores produced by endophytic bacteria. © 2012 Society for Applied Microbiology and Blackwell Publishing Ltd.

Portable, low-cost NMR with laser-lathe lithography produced microcoils.

Science.gov (United States)

Demas, Vasiliki; Herberg, Julie L; Malba, Vince; Bernhardt, Anthony; Evans, Lee; Harvey, Christopher; Chinn, Sarah C; Maxwell, Robert S; Reimer, Jeffrey

2007-11-01

Nuclear Magnetic Resonance (NMR) is unsurpassed in its ability to non-destructively probe chemical identity. Portable, low-cost NMR sensors would enable on-site identification of potentially hazardous substances, as well as the study of samples in a variety of industrial applications. Recent developments in RF microcoil construction (i.e. coils much smaller than the standard 5mm NMR RF coils), have dramatically increased NMR sensitivity and decreased the limits-of-detection (LOD). We are using advances in laser pantographic microfabrication techniques, unique to LLNL, to produce RF microcoils for field deployable, high sensitivity NMR-based detectors. This same fabrication technique can be used to produce imaging coils for MRI as well as for standard hardware shimming or "ex-situ" shimming of field inhomogeneities typically associated with inexpensive magnets. This paper describes a portable NMR system based on the use of a 2 kg hand-held permanent magnet, laser-fabricated microcoils, and a compact spectrometer. The main limitations for such a system are the low resolution and sensitivity associated with the low field values and quality of small permanent magnets, as well as the lack of large amounts of sample of interest in most cases. The focus of the paper is on the setting up of this system, initial results, sensitivity measurements, discussion of the limitations and future plans. The results, even though preliminary, are promising and provide the foundation for developing a portable, inexpensive NMR system for chemical analysis. Such a system will be ideal for chemical identification of trace substances on site.

The production of fuels and chemicals from food processing wastes & cellulosics. Final research report

Energy Technology Data Exchange (ETDEWEB)

Dale, M.C.; Okos, M.; Burgos, N. [and others

1997-06-15

High strength food wastes of about 15-20 billion pounds solids are produced annually by US food producers. Low strength food wastes of 5-10 billion pounds/yr. are produced. Estimates of the various components of these waste streams are shown in Table 1. Waste paper/lignocellulosic crops could produce 2 to 5 billion gallons of ethanol per year or other valuable chemicals. Current oil imports cost the US about $60 billion dollars/yr. in out-going balance of trade costs. Many organic chemicals that are currently derived from petroleum can be produced through fermentation processes. Petroleum based processes have been preferred over biotechnology processes because they were typically cheaper, easier, and more efficient. The technologies developed during the course of this project are designed to allow fermentation based chemicals and fuels to compete favorably with petroleum based chemicals. Our goals in this project have been to: (1) develop continuous fermentation processes as compared to batch operations; (2) combine separation of the product with the fermentation, thus accomplishing the twin goals of achieving a purified product from a fermentation broth and speeding the conversion of substrate to product in the fermentation broth; (3) utilize food or cellulosic waste streams which pose a current cost or disposal problem as compared to high cost grains or sugar substrates; (4) develop low energy recovery methods for fermentation products; and finally (5) demonstrate successful lab scale technologies on a pilot/production scale and try to commercialize the processes. The scale of the wastes force consideration of {open_quotes}bulk commodity{close_quotes} type products if a high fraction of the wastes are to be utilized.

Calorimetric studies and lessons on fires and explosions of a chemical plant producing CHP and DCPO

International Nuclear Information System (INIS)

Hsu, Jing-Ming; Su, Mao-Sheng; Huang, Chiao-Ying; Duh, Yih-Shing

2012-01-01

Highlights: ► We analyzed fire and explosion incidents in a plant producing CHP and DCPO. ► Data from calorimeters reveal causes and phenomena associated with the incidents. ► The credible worst scenario was thermal explosion. ► Incidents may be avoided by implementing DIERS methodology. - Abstract: Cumene hydroperoxide (CHP) has been used in producing phenol, dicumyl peroxide (DCPO) and as an initiator for synthesizing acrylonitrile–butadiene–styrene (ABS) resin by copolymerization in Taiwan. Four incidents of fire and explosion induced by thermal runaway reactions were occurred in a same plant producing CHP, DCPO and bis-(tert-butylperoxy isopropyl) benzene peroxide (BIBP). The fourth fire and explosion occurred in the CHP reactor that resulted in a catastrophic damage in reaction region and even spread throughout storage area. Descriptions on the occurrences of these incidents were assessed by the features of processes, reaction schemes and unexpected side reactions. Calorimetric data on thermokinetics and pressure were used for explaining the practical consequences or which the worst cases encountered in this kind of plant. Acceptable risk associated with emergency relief system design is vital for a plant producing organic peroxide. These basic data for designing an inherently safer plant can be conducted from adiabatic calorimetry. An encouraging deduction has been drawn here, these incidents may be avoided by the implementation of API RP 520, API RP 521, DIERS technology, OSHA 1910.119 and AIChE's CCPS recommended PSM elements.

SiO2 coating of silver nanoparticles by photoinduced chemical vapor deposition

International Nuclear Information System (INIS)

Boies, Adam M; Girshick, Steven L; Roberts, Jeffrey T; Zhang Bin; Nakamura, Toshitaka; Mochizuki, Amane

2009-01-01

Gas-phase silver nanoparticles were coated with silicon dioxide (SiO 2 ) by photoinduced chemical vapor deposition (photo-CVD). Silver nanoparticles, produced by inert gas condensation, and a SiO 2 precursor, tetraethylorthosilicate (TEOS), were exposed to vacuum ultraviolet (VUV) radiation at atmospheric pressure and varying temperatures. The VUV photons dissociate the TEOS precursor, initiating a chemical reaction that forms SiO 2 coatings on the particle surfaces. Coating thicknesses were measured for a variety of operation parameters using tandem differential mobility analysis and transmission electron microscopy. The chemical composition of the particle coatings was analyzed using energy dispersive x-ray spectrometry and Fourier transform infrared spectroscopy. The highest purity films were produced at 300-400 0 C with low flow rates of additional oxygen. The photo-CVD coating technique was shown to effectively coat nanoparticles and limit core particle agglomeration at concentrations up to 10 7 particles cm -3 .

Short-Term Dosage Regimen for Stimulation-Induced Long-Lasting Desynchronization

Directory of Open Access Journals (Sweden)

Thanos Manos

2018-04-01

Full Text Available In this paper, we computationally generate hypotheses for dose-finding studies in the context of desynchronizing neuromodulation techniques. Abnormally strong neuronal synchronization is a hallmark of several brain disorders. Coordinated Reset (CR stimulation is a spatio-temporally patterned stimulation technique that specifically aims at disrupting abnormal neuronal synchrony. In networks with spike-timing-dependent plasticity CR stimulation may ultimately cause an anti-kindling, i.e., an unlearning of abnormal synaptic connectivity and neuronal synchrony. This long-lasting desynchronization was theoretically predicted and verified in several pre-clinical and clinical studies. We have shown that CR stimulation with rapidly varying sequences (RVS robustly induces an anti-kindling at low intensities e.g., if the CR stimulation frequency (i.e., stimulus pattern repetition rate is in the range of the frequency of the neuronal oscillation. In contrast, CR stimulation with slowly varying sequences (SVS turned out to induce an anti-kindling more strongly, but less robustly with respect to variations of the CR stimulation frequency. Motivated by clinical constraints and inspired by the spacing principle of learning theory, in this computational study we propose a short-term dosage regimen that enables a robust anti-kindling effect of both RVS and SVS CR stimulation, also for those parameter values where RVS and SVS CR stimulation previously turned out to be ineffective. Intriguingly, for the vast majority of parameter values tested, spaced multishot CR stimulation with demand-controlled variation of stimulation frequency and intensity caused a robust and pronounced anti-kindling. In contrast, spaced CR stimulation with fixed stimulation parameters as well as singleshot CR stimulation of equal integral duration failed to improve the stimulation outcome. In the model network under consideration, our short-term dosage regimen enables to robustly induce

Short-Term Dosage Regimen for Stimulation-Induced Long-Lasting Desynchronization.

Science.gov (United States)

Manos, Thanos; Zeitler, Magteld; Tass, Peter A

2018-01-01

In this paper, we computationally generate hypotheses for dose-finding studies in the context of desynchronizing neuromodulation techniques. Abnormally strong neuronal synchronization is a hallmark of several brain disorders. Coordinated Reset (CR) stimulation is a spatio-temporally patterned stimulation technique that specifically aims at disrupting abnormal neuronal synchrony. In networks with spike-timing-dependent plasticity CR stimulation may ultimately cause an anti-kindling, i.e., an unlearning of abnormal synaptic connectivity and neuronal synchrony. This long-lasting desynchronization was theoretically predicted and verified in several pre-clinical and clinical studies. We have shown that CR stimulation with rapidly varying sequences (RVS) robustly induces an anti-kindling at low intensities e.g., if the CR stimulation frequency (i.e., stimulus pattern repetition rate) is in the range of the frequency of the neuronal oscillation. In contrast, CR stimulation with slowly varying sequences (SVS) turned out to induce an anti-kindling more strongly, but less robustly with respect to variations of the CR stimulation frequency. Motivated by clinical constraints and inspired by the spacing principle of learning theory, in this computational study we propose a short-term dosage regimen that enables a robust anti-kindling effect of both RVS and SVS CR stimulation, also for those parameter values where RVS and SVS CR stimulation previously turned out to be ineffective. Intriguingly, for the vast majority of parameter values tested, spaced multishot CR stimulation with demand-controlled variation of stimulation frequency and intensity caused a robust and pronounced anti-kindling. In contrast, spaced CR stimulation with fixed stimulation parameters as well as singleshot CR stimulation of equal integral duration failed to improve the stimulation outcome. In the model network under consideration, our short-term dosage regimen enables to robustly induce long

Investigating quality of life and self-stigma in Hong Kong children with specific learning disabilities.

Science.gov (United States)

Chan, Yi; Chan, Yim Yuk; Cheng, Sui Lam; Chow, Man Yin; Tsang, Yau Wai; Lee, Clara; Lin, Chung-Ying

2017-09-01

Children with specific learning disabilities (SpLD) are likely to develop self-stigma and have a poor quality of life (QoL) because of their poor academic performance. Although both self-stigma and poor QoL issues are likely to be found in low academic achievers without SpLD, children with SpLD have worse situation because their diagnosis of SpLD suggests that their learning struggles are biological and permanent. Specifically, students' perception of own capabilities may be affected more by the diagnosis of SpLD than their own actual performance. We examined the self-stigma and QoL of children with SpLD in Hong Kong, a region with an academics-focused culture. Children with SpLD (n=49,M age ±SD=9.55±1.21; SpLD group) and typically developing children (n=32,M age ±SD=9.81±1.40; TD group) completed a Kid-KINDL to measure QoL and a Modified Self-Stigma Scale to measure self-stigma. All parents completed a parallel Kid-KINDL to measure QoL of their children. Compared with the TD group, the SpLD group had a higher level of self-stigma (p=0.027) and lower QoL (child-reported Kid-KINDL: p=0.001; parent-reported Kid-KINDL: plearning process of children with SpLD may be designed to overcome self-stigma and to improve QoL. In addition, the program may involve parents of the children with SpLD or other people (e.g., the peer of the children with SpLD) for improving their understanding and perceptions of SpLD. Copyright © 2017 Elsevier Ltd. All rights reserved.

Physico-chemical composition of unripe (green) plantain and ...

African Journals Online (AJOL)

Post harvest characteristics are important selection criteria in the genetic improvement of starchy staple food crops. This study aimed at determining the proximate chemical constituents of thirteen clones of new plantain and banana hybrids at harvest. Flour was produced and analysed for starch and sugar contents. The pulp ...

Microbiological and physical-chemical characteristics of honeys from the bee Melipona fasciculata produced in two regions of Brazil

Directory of Open Access Journals (Sweden)

Rachel Torquato Fernandes

2018-05-01

Full Text Available ABSTRACT: The honey from Tiúba bees (Melipona fasciculata is commercially important in the Brazilian state of Maranhão. However, the absence of any specific legislation for this kind of honey is an obstacle to its increased production and commercialization. Determining the microbiological and physical-chemical characteristics of different Tiúba honey can inform the elaboration of specific legislation. Thus, honey samples from two Water Catchment Areas in Maranhão (Munim and Pericumã, sample size 20 for each were collected and submitted for microbiological analysis (total coliforms, thermotolerant coliforms, molds and yeasts, Clostridium sulfite reducers and Salmonella sp. and physical-chemical analysis (moisture content, reducing and non-reducing sugars, insoluble and soluble solids, ash content, acidity and pH. Most of honeys sampled were suitable for human consumption, except for one sample from Pericumã. Honeys from the two water catchment areas presented differences in some physicochemical characteristics, which can be attributed to the botanic, soil and climatic diversity of the two areas. Still, these Tiúba honey samples did not fall within the Brazilian legislation for Apis mellifera honey for some of the physical-chemical characteristics, and so is not properly regulated, thus reinforcing the need for specific legislation for this type of honey.

Challenges to studying the health effects of early life environmental chemical exposures on children's health.

Science.gov (United States)

Braun, Joseph M; Gray, Kimberly

2017-12-01

Epidemiological studies play an important role in quantifying how early life environmental chemical exposures influence the risk of childhood diseases. These studies face at least four major challenges that can produce noise when trying to identify signals of associations between chemical exposure and childhood health. Challenges include accurately estimating chemical exposure, confounding from causes of both exposure and disease, identifying periods of heightened vulnerability to chemical exposures, and determining the effects of chemical mixtures. We provide recommendations that will aid in identifying these signals with more precision.

Chemical degradation of pentachlorophenol

International Nuclear Information System (INIS)

Shukla, S.S.; Shukla, A.; Chandrasekharaiah, M.S.

1992-01-01

Industry produces a large volume of hazardous wastes containing pentachlorophenol, a U.S. EPA priority hazardous organic material. The environmentally safe disposal of these PCP-contaminated wastes is a serious problem for the waste management authorities as the current treatment processes are unsatisfactory. In this paper, the results of a feasibility study of chemical degradation and/or solidification methods for PCP-containing wastes. The photochemical decomposition of the PCP in a microemulsion or in micellar media obtained with the help of SDS or CTAB show the greatest promise

Inverse metal-assisted chemical etching produces smooth high aspect ratio InP nanostructures.

Science.gov (United States)

Kim, Seung Hyun; Mohseni, Parsian K; Song, Yi; Ishihara, Tatsumi; Li, Xiuling

2015-01-14

Creating high aspect ratio (AR) nanostructures by top-down fabrication without surface damage remains challenging for III-V semiconductors. Here, we demonstrate uniform, array-based InP nanostructures with lateral dimensions as small as sub-20 nm and AR > 35 using inverse metal-assisted chemical etching (I-MacEtch) in hydrogen peroxide (H2O2) and sulfuric acid (H2SO4), a purely solution-based yet anisotropic etching method. The mechanism of I-MacEtch, in contrast to regular MacEtch, is explored through surface characterization. Unique to I-MacEtch, the sidewall etching profile is remarkably smooth, independent of metal pattern edge roughness. The capability of this simple method to create various InP nanostructures, including high AR fins, can potentially enable the aggressive scaling of InP based transistors and optoelectronic devices with better performance and at lower cost than conventional etching methods.

Physical chemical properties of sludges of a chemical treatment of boilers feed water and ways of their utilization

Directory of Open Access Journals (Sweden)

T. Krasnenko

2013-03-01

Full Text Available Water is a necessary process for TPP power plant operation. To the power station, in the production of electricity and heat as a result of the preparation of large amounts of water to compensate for losses associated with the release of process steam for production, produce large quantities of waste water treatment - water treatment chemical sludge (WTCS.

Characterization of Ceramic Material Produced From a Cold Crucible Induction Melter Test

Energy Technology Data Exchange (ETDEWEB)

Amoroso, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Marra, J. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2015-04-30

This report summarizes the results from characterization of samples from a melt processed surrogate ceramic waste form. Completed in October of 2014, the first scaled proof of principle cold crucible induction melter (CCIM) test was conducted to process a Fe-hollandite-rich titanate ceramic for treatment of high level nuclear waste. X-ray diffraction, electron microscopy, inductively coupled plasma-atomic emission spectroscopy (and inductively coupled plasma-mass spectroscopy for Cs), and product consistency tests were used to characterize the CCIM material produced. Core samples at various radial locations from the center of the CCIM were taken. These samples were also sectioned and analyzed vertically. Together, the various samples were intended to provide an indication of the homogeneity throughout the CCIM with respect to phase assemblage, chemical composition, and chemical durability. Characterization analyses confirmed that a crystalline ceramic with desirable phase assemblage was produced from a melt using a CCIM. Hollandite and zirconolite were identified in addition to possible highly-substituted pyrochlore and perovskite. Minor phases rich in Fe, Al, or Cs were also identified. Remarkably only minor differences were observed vertically or radially in the CCIM material with respect to chemical composition, phase assemblage, and durability. This recent CCIM test and the resulting characterization in conjunction with demonstrated compositional improvements support continuation of CCIM testing with an improved feed composition and improved melter system.

Recycling produced water for algal cultivation for biofuels

Energy Technology Data Exchange (ETDEWEB)

Neal, Justin N. [Los Alamos National Laboratory; Sullivan, Enid J. [Los Alamos National Laboratory; Dean, Cynthia A. [Los Alamos National Laboratory; Steichen, Seth A. [Los Alamos National Laboratory

2012-08-09

Algal growth demands a continuous source of water of appropriate salinity and nutritional content. Fresh water sources are scarce in the deserts of the Southwestern United States, hence, salt water algae species are being investigated as a renewable biofuel source. The use of produced water from oil wells (PW) could offset the demand for fresh water in cultivation. Produced water can contain various concentrations of dissolved solids, metals and organic contaminants and often requires treatment beyond oil/water separation to make it suitable for algae cultivation. The produced water used in this study was taken from an oil well in Jal, New Mexico. An F/2-Si (minus silica) growth media commonly used to cultivate Nannochloropsis salina 1776 (NS 1776) was prepared using the produced water (F/2-Si PW) taking into account the metals and salts already present in the water. NS 1776 was seeded into a bioreactor containing 5L of the (F/2-Si PW) media. After eleven days the optical density at 750 nm (an indicator of algal growth) increased from 0 to 2.52. These results indicate algae are able to grow, though inhibited when compared with non-PW media, in the complex chemical conditions found in produced water. Savings from using nutrients present in the PW, such as P, K, and HCO{sub 3}{sup -}, results in a 44.38% cost savings over fresh water to mix the F/2-Si media.

Calorimetric studies and lessons on fires and explosions of a chemical plant producing CHP and DCPO

Energy Technology Data Exchange (ETDEWEB)

Hsu, Jing-Ming; Su, Mao-Sheng; Huang, Chiao-Ying [Department of Occupational Safety and Health, Chia Nan University of Pharmacy and Science, Tainan, Taiwan, ROC (China); Duh, Yih-Shing, E-mail: yihshingduh@yahoo.com.tw [Department of Safety, Health and Environmental Engineering, National United University, No. 1 Lien-Da, Miaoli, Taiwan, ROC (China)

2012-05-30

Highlights: Black-Right-Pointing-Pointer We analyzed fire and explosion incidents in a plant producing CHP and DCPO. Black-Right-Pointing-Pointer Data from calorimeters reveal causes and phenomena associated with the incidents. Black-Right-Pointing-Pointer The credible worst scenario was thermal explosion. Black-Right-Pointing-Pointer Incidents may be avoided by implementing DIERS methodology. - Abstract: Cumene hydroperoxide (CHP) has been used in producing phenol, dicumyl peroxide (DCPO) and as an initiator for synthesizing acrylonitrile-butadiene-styrene (ABS) resin by copolymerization in Taiwan. Four incidents of fire and explosion induced by thermal runaway reactions were occurred in a same plant producing CHP, DCPO and bis-(tert-butylperoxy isopropyl) benzene peroxide (BIBP). The fourth fire and explosion occurred in the CHP reactor that resulted in a catastrophic damage in reaction region and even spread throughout storage area. Descriptions on the occurrences of these incidents were assessed by the features of processes, reaction schemes and unexpected side reactions. Calorimetric data on thermokinetics and pressure were used for explaining the practical consequences or which the worst cases encountered in this kind of plant. Acceptable risk associated with emergency relief system design is vital for a plant producing organic peroxide. These basic data for designing an inherently safer plant can be conducted from adiabatic calorimetry. An encouraging deduction has been drawn here, these incidents may be avoided by the implementation of API RP 520, API RP 521, DIERS technology, OSHA 1910.119 and AIChE's CCPS recommended PSM elements.

Preparation of carbon dioxide adsorbents from the chemical activation of urea-formaldehyde and melamine-formaldehyde resins

Energy Technology Data Exchange (ETDEWEB)

T.C. Drage; A. Arenillas; K.M. Smith; C. Pevida; S. Piippo; C.E. Snape [University of Nottingham, Nottingham (United Kingdom). Nottingham Fuel and Energy Centre, School of Chemical, Environmental and Mining Engineering

2007-01-15

Adsorption is considered to be one of the more promising technologies for the capture of CO{sub 2} from flue gases. In general, nitrogen enrichment is reported to be effective in enhancing the specific adsorbent-adsorbate interaction for CO{sub 2}. Nitrogen enriched carbons were produced from urea-formaldehyde and melamine-formaldehyde resins polymerised in the presence of K{sub 2}CO{sub 3} as a chemical activation agent, with activation undertaken over a range of temperatures. CO{sub 2} adsorption capacity was determined to be dependent upon both textural properties and more importantly nitrogen functionality. Adsorbents capable of capturing above 8 wt.% CO{sub 2} at 25{sup o}C were produced from the chemical activation of urea-formaldehyde resin at 500{sup o}C. Chemical activation seems to produce more effective adsorbents than CO{sub 2} activation. 29 refs., 4 figs., 3 tabs.

Apparatus and method for enhanced chemical processing in high pressure and atmospheric plasmas produced by high frequency electromagnetic waves

Science.gov (United States)

Efthimion, Philip C.; Helfritch, Dennis J.

1989-11-28

An apparatus and method for creating high temperature plasmas for enhanced chemical processing of gaseous fluids, toxic chemicals, and the like, at a wide range of pressures, especially at atmospheric and high pressures includes an electro-magnetic resonator cavity, preferably a reentrant cavity, and a wave guiding structure which connects an electro-magnetic source to the cavity. The cavity includes an intake port and an exhaust port, each having apertures in the conductive walls of the cavity sufficient for the intake of the gaseous fluids and for the discharge of the processed gaseous fluids. The apertures are sufficiently small to prevent the leakage of the electro-magnetic radiation from the cavity. Gaseous fluid flowing from the direction of the electro-magnetic source through the guiding wave structure and into the cavity acts on the plasma to push it away from the guiding wave structure and the electro-magnetic source. The gaseous fluid flow confines the high temperature plasma inside the cavity and allows complete chemical processing of the gaseous fluids at a wide range of pressures.

[Formation mechanism and chemical safety of nonintentional chemical substances present in chlorinated drinking water and wastewater].

Science.gov (United States)

Onodera, Sukeo

2010-09-01

This paper reviews the formation mechanism and chemical safety of nonintentional chemical substances (NICS) present in chlorine-treated water containing organic contaminants. Undesirable compounds, i.e., NICS, may be formed under certain conditions when chlorine reacts with organic matter. The rate and extent of chlorine consumption with organics are strongly dependent on their chemical structures, particularly whether double bonds or sulfur and nitrogen atoms occur in the molecules. Organothiophosphorus pesticides (P=S type) are easily oxidized to their phosphorus compounds (P=O type) in chlorinated water containing HOCl as little as 0.5 mg/l, resulting in an increase in cholinesterase-inhibitory activity. Chlorination of phenols in water also produces a series of highly chlorinated compounds, including chlorophenols, chloroquinones, chlorinated carboxylic acids, and polychlorinated phenoxyphenols (PCPPs). In some of these chloroquinones, 2,6-dichloroalkylsemiquinones exhibit a strong mutagenic response as do positive controls used in the Ames test. 2-phenoxyphenols in these PCPPs are particularly interesting, as they are present in the chlorine-treated phenol solution and they are also precursors (predioxins) of the highly toxic chlorinated dioxins. Polynuclear aromatic hydrocarbons (PAHs) were found to undergo chemical changes due to hypochlorite reactions to give chloro-substituted PAHs, oxygenated (quinones) and hydroxylated (phenols) compounds, but they exhibit a lower mutagenic response. In addition, field work was performed in river water and drinking water to obtain information on chemical distribution and their safety, and the results are compared with those obtained in the model chlorination experiments.

Physico-chemical analysis and sensory evaluation of bread ...

African Journals Online (AJOL)

This study carried out the physico-chemical analysis and sensory evaluation of bread produced using different indigenous yeast isolates in order to offer an insight into the overall quality of the bread. Four (4) different yeast species were isolated from sweet orange, pineapple and palm wine. The yeasts were characterized ...

Egg Production Constrains Chemical Defenses in a Neotropical Arachnid.

Directory of Open Access Journals (Sweden)

Taís M Nazareth

Full Text Available Female investment in large eggs increases the demand for fatty acids, which are allocated for yolk production. Since the biosynthetic pathway leading to fatty acids uses the same precursors used in the formation of polyketides, allocation trade-offs are expected to emerge. Therefore, egg production should constrain the investment in chemical defenses based on polyketides, such as benzoquinones. We tested this hypothesis using the harvestman Acutiosoma longipes, which produces large eggs and releases benzoquinones as chemical defense. We predicted that the amount of secretion released by ovigerous females (OFs would be smaller than that of non-ovigerous females (NOF. We also conducted a series of bioassays in the field and in the laboratory to test whether egg production renders OFs more vulnerable to predation. OFs produce less secretion than NOFs, which is congruent with the hypothesis that egg production constrains the investment in chemical defenses. Results of the bioassays show that the secretion released by OFs is less effective in deterring potential predators (ants and spiders than the secretion released by NOFs. In conclusion, females allocate resources to chemical defenses in a way that preserves a primary biological function related to reproduction. However, the trade-off between egg and secretion production makes OFs vulnerable to predators. We suggest that egg production is a critical moment in the life of harvestman females, representing perhaps the highest cost of reproduction in the group.

Functional, genetic and chemical characterization of biosurfactants produced by plant growth-promoting Pseudomonas putida 267

NARCIS (Netherlands)

Kruijt, M.; Tran, H.; Raaijmakers, J.M.

2009-01-01

Aims: Plant growth-promoting Pseudomonas putida strain 267, originally isolated from the rhizosphere of black pepper, produces biosurfactants that cause lysis of zoospores of the oomycete pathogen Phytophthora capsici. The biosurfactants were characterized, the biosynthesis gene(s) partially

Method for producing components with internal architectures, such as micro-channel reactors, via diffusion bonding sheets

Science.gov (United States)

Alman, David E [Corvallis, OR; Wilson, Rick D [Corvallis, OR; Davis, Daniel L [Albany, OR

2011-03-08