Piping design and analysis: Comparison between the Belgian applications of French and American rules

International Nuclear Information System (INIS)

Daoust, P.H.; Geraets, L.H.; Lafaille, J.P.

1987-01-01

In the process of a feasibility study of a new nuclear power plant in Belgium, the French and American rules for piping design have been compared. The Belgian method rests on the American nuclear set of rules and uses the ASME code. French rules were initially based on the American rules (1978). Subsequent individual development led to a differentiation of the rules. Presently the mechanical part of the French rules is mainly contained in the RCC-P ('Regles de Conception et de Construction relatives aux Procedes') and the RCC-M ('Regles de Conception et de Construction des Materiels Mecaniques'). This paper compares the piping design rules from a general point of view; examples of applications allow to identify benefits or drawbacks of the use of ASME or RCCM codes. (orig.)

Piping design and analysis: comparison between the Belgian applications of French and American rules

International Nuclear Information System (INIS)

Daoust, Ph.; Geraets, L.H.; Lafaille, J.P.

1989-01-01

In the process of a feasibility study of a new nuclear power plant in Belgium, the French and American rules for piping design have been compared. The Belgian method rests on the American nuclear set of rules and uses the ASME code. French rules were initially based on the American rules (1978). Subsequent individual development led to a differentiation of the rules. Presently, the mechanical part of the French rules is mainly contained in the RCCP ('Regles de Conception et de Construction relatives aux Procedes') and the RCCM ('Regles de Conception et de Construction des materiels Mecaniques'). This paper compares the piping design rules from a general point of view; examples of applications allow benefits or drawbacks of the use of ASME or RCCM codes to identified. (author)

Online Rule Generation Software Process Model

OpenAIRE

Sudeep Marwaha; Alka Aroa; Satma M C; Rajni Jain; R C Goyal

2013-01-01

For production systems like expert systems, a rule generation software can facilitate the faster deployment. The software process model for rule generation using decision tree classifier refers to the various steps required to be executed for the development of a web based software model for decision rule generation. The Royce’s final waterfall model has been used in this paper to explain the software development process. The paper presents the specific output of various steps of modified wat...

Implementing XML Schema Naming and Design Rules

Energy Technology Data Exchange (ETDEWEB)

Lubell, Joshua [National Institute of Standards and Technology (NIST); Kulvatunyou, Boonserm [ORNL; Morris, Katherine [National Institute of Standards and Technology (NIST); Harvey, Betty [Electronic Commerce Connection, Inc.

2006-08-01

We are building a methodology and tool kit for encoding XML schema Naming and Design Rules (NDRs) in a computer-interpretable fashion, enabling automated rule enforcement and improving schema quality. Through our experience implementing rules from various NDR specifications, we discuss some issues and offer practical guidance to organizations grappling with NDR development.

Report on design rules of μ-tools for standard insert

DEFF Research Database (Denmark)

Tosello, Guido; Esmoris, Josa Ignacio; Quadroni, A.

2011-01-01

-effectively, especially for micro injection moulding. This particular deliverable has the objective to present the design rules for high performance μ-tools and inserts manufacture based on the new standard manufacturing process chains established during the WP 2.2 work. In particular, the achievable features, surfaces......Tooling is one of the critical stages of the process chain for polymer micro products manufacture and in particular for the COTECH process chain. Therefore, within the scope of SP2 “Tooling”, the WP 2.2 “New tool-making solutions for μ-IM and HE” is designed to investigate, develop and standardize...

Report on design rules of μ-tools for hybrid tooling

DEFF Research Database (Denmark)

Esmoris, Jose Ignacio; Azcarate, S.; Tosello, Guido

2011-01-01

-effectively, especially for micro injection moulding. This particular deliverable has the objective to present the design rules for high performance μ-tools and inserts manufacture based on the new standard manufacturing process chains established during the WP 2.2 work. In particular, the achievable features, surfaces......Tooling is one of the critical stages of the process chain for polymer micro products manufacture and in particular for the COTECH process chain. Therefore, within the scope of SP2 “Tooling”, the WP 2.2 “New tool-making solutions for μ-IM and HE” is designed to investigate, develop and standardize...

Risk Importance Determination Process of CANDU Maintenance Rule Function

International Nuclear Information System (INIS)

Seo, Mi Ro; Jo, Ha Yan; Hwang, Mi Jeong

2009-01-01

In Korea, Maintenance Rule (MR) programs development for all PWR were completed. However, in case of PHWR (CANDU type, Wolsong Unit 1,2,3,4), the study of MR program was delayed, since the design concepts and operating experiences are different from those of PWR. This paper describes the process and results for the risk importance determination process of functions in scope. The risk importance was determined by PSA Basic Event Mapping and Delphi method. For Delphi evaluation, Delphi evaluation item for CANDU need to be developed because the design and normal operation functions are different from PWR

Sum rules for collisional processes

International Nuclear Information System (INIS)

Oreg, J.; Goldstein, W.H.; Bar-Shalom, A.; Klapisch, M.

1991-01-01

We derive level-to-configuration sum rules for dielectronic capture and for collisional excitation and ionization. These sum rules give the total transition rate from a detailed atomic level to an atomic configuration. For each process, we show that it is possible to factor out the dependence on continuum-electron wave functions. The remaining explicit level dependence of each rate is then obtained from the matrix element of an effective operator acting on the bound orbitals only. In a large class of cases, the effective operator reduces to a one-electron monopole whose matrix element is proportional to the statistical weight of the level. We show that even in these cases, nonstatistical level dependence enters through the dependence of radial integrals on continuum orbitals. For each process, explicit analytic expressions for the level-to-configuration sum rules are given for all possible cases. Together with the well-known J-file sum rule for radiative rates [E. U. Condon and G. H. Shortley, The Theory of Atomic Spectra (University Press, Cambridge, 1935)], the sum rules offer a systematic and efficient procedure for collapsing high-multiplicity configurations into ''effective'' levels for the purpose of modeling the population kinetics of ionized heavy atoms in plasma

Enhancing collaborative rule-making on global sustainability concerns through Participatory Design

DEFF Research Database (Denmark)

Buhmann, Karin

This short paper outlines the background and prospects for a potential research agenda of Participatory Design (PD) in the area of collaborative transnational rule-making on global sustainability concerns. The paper adopts a pragmatic approach to interdisciplinary work, identifying new...... with opportunities to involve a global citizenry in the evolution of norms of conduct that may affect the lives and futures of individuals. The paper describes research potential for PD towards enhancing information technology assisted inclusion of views, needs and concerns of individuals in transnational rule......-making. It does so by drawing on the process that led to the 2011 United Nations Guiding Principles on Business and Human Rights. This process exemplifies challenges in collaborative and inclusive global rule-making that that may be assisted by increased and informed deployment of IT in order to enhance broad...

A design rule about thermal ratcheting

International Nuclear Information System (INIS)

Clement, G.; Lebey, J.; Roche, R.L.

1984-01-01

The purpose of this paper is to present an analysis of thermal ratcheting, and to give a practical design rule aimed at avoiding its detrimental effects. A practical method will thus be available to designers for dealing with one of the adverse effects of computed thermal stresses

Quality and rules for mechanical aspects of tangible interaction design

NARCIS (Netherlands)

Broekhuijsen, M.J.; Delbressine, F.L.M.; Feijs, L.M.G.

2011-01-01

This paper describes the application of Exact Kinematic Constraint Design to designs meant for tangible interaction with users. The paper gives rules for generating high quality mechanical designs for tangible interactions. Each rule is explained using examples made in LEGO and real world examples.

Sizing rules for the pressure design of pump casings

International Nuclear Information System (INIS)

Aflalo, C.; Barbarulo, R.; Courcot, M.; Marolles, M. de; Douarin, M.; Grandemange, J.M.; Martin, R.

1987-01-01

The paper presents the theoretical and experimental studies undertaken by AFCEN (French Society for Design and Construction Rules for nuclear island components) and SCP (French Union of Pump Manufacturers) in order to develop sizing rules for the pressure design of radially split pump casings. Shape factors used in simplified design formulas have been developed for different configurations using results of finite element analyses and experimental extensometric analyses. (orig.)

RCC-M - Design and Conception Rules for Mechanical Components of PWR Nuclear Islands

International Nuclear Information System (INIS)

2007-01-01

The design and construction rules applicable to mechanical components of PWR Nuclear Islands (RCC-M) are a part of the collection of design and construction rules for nuclear power plants. It covers the rules applicable to the design and manufacture of pressure boundaries of mechanical equipment of pressurized water reactors (PWR). The pressure components subject to the RCC-M are specified in A 4000. They include the reactor fluid systems (primary, secondary and auxiliary systems) and other components which are not subject to pressure: vessel internals, supports for pressure components subject to the RCC-M, nuclear island storage tanks. When a pressure equipment is subject to the RCC-M, all its elements subject to pressure are also, in accordance with the provisions of A 4000, and these elements are the same class as the component. In this case all the provisions of the RCC-M are applicable: design, procurement, manufacture, inspection and pressure testing. Elements which are not subject to pressure and which are subject to the RCC-M may be covered within the Code by limited specific provisions (procurement of materials for example). The other rules applicable to this equipment must be in contractual form. The assemblies comprising pressure equipment assembled by a manufacturer to constitute an integrated and functional whole, shall be subject to the rules indicated in this Code. Main objectives of Code Requirements are to ensure the integrity and mechanical stability over the equipment design life. Function ability and operability of equipment are not directly addressed in the Code. The RCC-M contributes to ensuring compliance with regulatory requirements. These requirements depend on the applicable regulatory context. The RCC-M is representative of the state of the art as concerns the design and manufacture of PWR components, ensuring an overall safety level tested through experience. The RCC-M consists of five sections, which provide rules for the design and

Extraction of design rules from multi-objective design exploration (MODE) using rough set theory

International Nuclear Information System (INIS)

Obayashi, Shigeru

2011-01-01

Multi-objective design exploration (MODE) and its application for design rule extraction are presented. MODE reveals the structure of design space from the trade-off information. The self-organizing map (SOM) is incorporated into MODE as a visual data-mining tool for design space. SOM divides the design space into clusters with specific design features. The sufficient conditions for belonging to a cluster of interest are extracted using rough set theory. The resulting MODE was applied to the multidisciplinary wing design problem, which revealed a cluster of good designs, and we extracted the design rules of such designs successfully.

Automatic generation of optimal business processes from business rules

NARCIS (Netherlands)

Steen, B.; Ferreira Pires, Luis; Iacob, Maria Eugenia

2010-01-01

In recent years, business process models are increasingly being used as a means for business process improvement. Business rules can be seen as requirements for business processes, in that they describe the constraints that must hold for business processes that implement these business rules.

49 CFR 106.10 - Process for issuing rules.

Science.gov (United States)

2010-10-01

... filing written comments or making oral presentations). (4) Whom to call if you have questions about the... 49 Transportation 2 2010-10-01 2010-10-01 false Process for issuing rules. 106.10 Section 106.10... PHMSA Rulemaking Documents § 106.10 Process for issuing rules. (a) PHMSA (“we”) uses informal rulemaking...

39 CFR 230.26 - Do these rules affect the service of process requirements of the Federal Rules of Civil Procedure...

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Do these rules affect the service of process....26 Do these rules affect the service of process requirements of the Federal Rules of Civil Procedure... Rules of Civil Procedure regarding service of process. ...

A Hybrid Genetic Programming Algorithm for Automated Design of Dispatching Rules.

Science.gov (United States)

Nguyen, Su; Mei, Yi; Xue, Bing; Zhang, Mengjie

2018-06-04

Designing effective dispatching rules for production systems is a difficult and timeconsuming task if it is done manually. In the last decade, the growth of computing power, advanced machine learning, and optimisation techniques has made the automated design of dispatching rules possible and automatically discovered rules are competitive or outperform existing rules developed by researchers. Genetic programming is one of the most popular approaches to discovering dispatching rules in the literature, especially for complex production systems. However, the large heuristic search space may restrict genetic programming from finding near optimal dispatching rules. This paper develops a new hybrid genetic programming algorithm for dynamic job shop scheduling based on a new representation, a new local search heuristic, and efficient fitness evaluators. Experiments show that the new method is effective regarding the quality of evolved rules. Moreover, evolved rules are also significantly smaller and contain more relevant attributes.

RCC-F: Design and construction rules for PWR fire protection systems

International Nuclear Information System (INIS)

2013-01-01

The RCC-F code defines the rules for designing, building and installing the fire protection systems used to manage the nuclear hazards inherent in the outbreak of a fire inside the facility and thereby control the fundamental nuclear functions. The code provides fire protection recommendations in terms of: the industrial risk (loss of assets and/or operation), personnel safety, the environment. The code is divided into five main sections: generalities, design safety principles, fire protection design bases, construction provisions, rules for installing the fire protection components and equipment. The RCC-F code is available as an ETC-F version specifically for EPR projects (European pressurized reactor). Contents of the 2013 edition of the ETC-F code: Volume A - Generalities: Structure of ETC-F general points, documentation (in progress), chapter (provision) quality assurance; Volume B - Design safety principles: design nuclear safety principles; Volume C - Fire protection design bases: fire protection design bases; Volume D - Construction provisions: construction provisions; Volume E - Installation rules for fire protection: rules for installing the fire protection, components and equipment

Identification and sensitivity analysis of a correlated ground rule system (design arc)

Science.gov (United States)

Eastman, Eric; Chidambarrao, Dureseti; Rausch, Werner; Topaloglu, Rasit O.; Shao, Dongbing; Ramachandran, Ravikumar; Angyal, Matthew

2017-04-01

We demonstrate a tool which can function as an interface between VLSI designers and process-technology engineers throughout the Design-Technology Co-optimization (DTCO) process. This tool uses a Monte Carlo algorithm on the output of lithography simulations to model the frequency of fail mechanisms on wafer. Fail mechanisms are defined according to process integration flow: by Boolean operations and measurements between original and derived shapes. Another feature of this design rule optimization methodology is the use of a Markov-Chain-based algorithm to perform a sensitivity analysis, the output of which may be used by process engineers to target key process-induced variabilities for improvement. This tool is used to analyze multiple Middle-Of-Line fail mechanisms in a 10nm inverter design and identify key process assumptions that will most strongly affect the yield of the structures. This tool and the underlying algorithm are also shown to be scalable to arbitrarily complex geometries in three dimensions. Such a characteristic which is becoming more important with the introduction of novel patterning technologies and more complex 3-D on-wafer structures.

Implementation of hierarchical design for manufacture rules in manufacturing processes

OpenAIRE

Parvez, Masud

2008-01-01

In order to shorten the product development cycle time, minimise overall cost and smooth transition into production, early consideration of manufacturing processes is important. Design for Manufacture (DFM) is the practice of designing products with manufacturing issues using an intelligent system, which translates 3D solid models into manufacturable features. Many existing and potential applications, particularly in the field of manufacturing, require various aspects of features technology. ...

Comparative analysis of business rules and business process modeling languages

Directory of Open Access Journals (Sweden)

Audrius Rima

2013-03-01

Full Text Available During developing an information system is important to create clear models and choose suitable modeling languages. The article analyzes the SRML, SBVR, PRR, SWRL, OCL rules specifying language and UML, DFD, CPN, EPC and IDEF3 BPMN business process modeling language. The article presents business rules and business process modeling languages theoretical comparison. The article according to selected modeling aspects of the comparison between different business process modeling languages ​​and business rules representation languages sets. Also, it is selected the best fit of language set for three layer framework for business rule based software modeling.

14 CFR 11.31 - How does FAA process direct final rules?

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false How does FAA process direct final rules? 11... PROCEDURAL RULES GENERAL RULEMAKING PROCEDURES Rulemaking Procedures General § 11.31 How does FAA process direct final rules? (a) A direct final rule will take effect on a specified date unless FAA receives an...

Design rules for superconducting analog-digital transducers; Entwurfsregeln fuer Supraleitende Analog-Digital-Wandler

Energy Technology Data Exchange (ETDEWEB)

Haddad, Taghrid

2015-05-29

This Thesis is a contribution for dimensioning aspects of circuits designs in superconductor electronics. Mainly superconductor comparators inclusive Josephson comparators as well as QOJS-Comparators are investigated. Both types were investigated in terms of speed and sensitivity. The influence of the thermal noise on the decision process of the comparators represent in so called gray zone, which is analysed in this thesis. Thereby, different relations between design parameters were derived. A circuit model of the Josephson comparator was verified by experiments. Concepts of superconductor analog-to-digital converters, which are based on above called comparators, were investigated in detail. From the comparator design rules, new rules for AD-converters were derived. Because of the reduced switching energy, the signal to noise ratio (SNR) of the circuits is affected and therefore the reliability of the decision-process is affected. For special applications with very demanding requirements in terms of the speed and accuracy superconductor analog-to-digital converters offer an excellent performance. This thesis provides relations between different design paramenters and shows resulting trade-offs, This method is transparent and easy to transfer to other circuit topologies. As a main result, a highly predictive tool for dimensioning of superconducting ADC's is proved.

Impact of polymer film thickness and cavity size on polymer flow during embossing : towards process design rules for nanoimprint lithography.

Energy Technology Data Exchange (ETDEWEB)

Schunk, Peter Randall; King, William P. (Georgia Institute of Technology, Atlanta, GA); Sun, Amy Cha-Tien; Rowland, Harry D. (Georgia Institute of Technology, Atlanta, GA)

2006-08-01

This paper presents continuum simulations of polymer flow during nanoimprint lithography (NIL). The simulations capture the underlying physics of polymer flow from the nanometer to millimeter length scale and examine geometry and thermophysical process quantities affecting cavity filling. Variations in embossing tool geometry and polymer film thickness during viscous flow distinguish different flow driving mechanisms. Three parameters can predict polymer deformation mode: cavity width to polymer thickness ratio, polymer supply ratio, and Capillary number. The ratio of cavity width to initial polymer film thickness determines vertically or laterally dominant deformation. The ratio of indenter width to residual film thickness measures polymer supply beneath the indenter which determines Stokes or squeeze flow. The local geometry ratios can predict a fill time based on laminar flow between plates, Stokes flow, or squeeze flow. Characteristic NIL capillary number based on geometry-dependent fill time distinguishes between capillary or viscous driven flows. The three parameters predict filling modes observed in published studies of NIL deformation over nanometer to millimeter length scales. The work seeks to establish process design rules for NIL and to provide tools for the rational design of NIL master templates, resist polymers, and process parameters.

An expert system design to diagnose cancer by using a new method reduced rule base.

Science.gov (United States)

Başçiftçi, Fatih; Avuçlu, Emre

2018-04-01

A Medical Expert System (MES) was developed which uses Reduced Rule Base to diagnose cancer risk according to the symptoms in an individual. A total of 13 symptoms were used. With the new MES, the reduced rules are controlled instead of all possibilities (2 13 = 8192 different possibilities occur). By controlling reduced rules, results are found more quickly. The method of two-level simplification of Boolean functions was used to obtain Reduced Rule Base. Thanks to the developed application with the number of dynamic inputs and outputs on different platforms, anyone can easily test their own cancer easily. More accurate results were obtained considering all the possibilities related to cancer. Thirteen different risk factors were determined to determine the type of cancer. The truth table produced in our study has 13 inputs and 4 outputs. The Boolean Function Minimization method is used to obtain less situations by simplifying logical functions. Diagnosis of cancer quickly thanks to control of the simplified 4 output functions. Diagnosis made with the 4 output values obtained using Reduced Rule Base was found to be quicker than diagnosis made by screening all 2 13 = 8192 possibilities. With the improved MES, more probabilities were added to the process and more accurate diagnostic results were obtained. As a result of the simplification process in breast and renal cancer diagnosis 100% diagnosis speed gain, in cervical cancer and lung cancer diagnosis rate gain of 99% was obtained. With Boolean function minimization, less number of rules is evaluated instead of evaluating a large number of rules. Reducing the number of rules allows the designed system to work more efficiently and to save time, and facilitates to transfer the rules to the designed Expert systems. Interfaces were developed in different software platforms to enable users to test the accuracy of the application. Any one is able to diagnose the cancer itself using determinative risk factors. Thereby

Multi-arm group sequential designs with a simultaneous stopping rule.

Science.gov (United States)

Urach, S; Posch, M

2016-12-30

Multi-arm group sequential clinical trials are efficient designs to compare multiple treatments to a control. They allow one to test for treatment effects already in interim analyses and can have a lower average sample number than fixed sample designs. Their operating characteristics depend on the stopping rule: We consider simultaneous stopping, where the whole trial is stopped as soon as for any of the arms the null hypothesis of no treatment effect can be rejected, and separate stopping, where only recruitment to arms for which a significant treatment effect could be demonstrated is stopped, but the other arms are continued. For both stopping rules, the family-wise error rate can be controlled by the closed testing procedure applied to group sequential tests of intersection and elementary hypotheses. The group sequential boundaries for the separate stopping rule also control the family-wise error rate if the simultaneous stopping rule is applied. However, we show that for the simultaneous stopping rule, one can apply improved, less conservative stopping boundaries for local tests of elementary hypotheses. We derive corresponding improved Pocock and O'Brien type boundaries as well as optimized boundaries to maximize the power or average sample number and investigate the operating characteristics and small sample properties of the resulting designs. To control the power to reject at least one null hypothesis, the simultaneous stopping rule requires a lower average sample number than the separate stopping rule. This comes at the cost of a lower power to reject all null hypotheses. Some of this loss in power can be regained by applying the improved stopping boundaries for the simultaneous stopping rule. The procedures are illustrated with clinical trials in systemic sclerosis and narcolepsy. © 2016 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd. © 2016 The Authors. Statistics in Medicine Published by John Wiley & Sons Ltd.

Verifying Architectural Design Rules of the Flight Software Product Line

Science.gov (United States)

Ganesan, Dharmalingam; Lindvall, Mikael; Ackermann, Chris; McComas, David; Bartholomew, Maureen

2009-01-01

This paper presents experiences of verifying architectural design rules of the NASA Core Flight Software (CFS) product line implementation. The goal of the verification is to check whether the implementation is consistent with the CFS architectural rules derived from the developer's guide. The results indicate that consistency checking helps a) identifying architecturally significant deviations that were eluded during code reviews, b) clarifying the design rules to the team, and c) assessing the overall implementation quality. Furthermore, it helps connecting business goals to architectural principles, and to the implementation. This paper is the first step in the definition of a method for analyzing and evaluating product line implementations from an architecture-centric perspective.

Knowledge Flow Rules of Modern Design under Distributed Resource Environment

Directory of Open Access Journals (Sweden)

Junning Li

2013-01-01

Full Text Available The process of modern design under the distributed resource environment is interpreted as the process of knowledge flow and integration. As the acquisition of new knowledge strongly depends on resources, knowledge flow can be influenced by technical, economic, and social relation factors, and so forth. In order to achieve greater efficiency of knowledge flow and make the product more competitive, the root causes of the above factors should be acquired first. In this paper, the authors attempt to reveal the nature of design knowledge flow from the perspectives of fluid dynamics and energy. The knowledge field effect and knowledge agglomeration effect are analyzed, respectively, in which the knowledge field effect model considering single task node and the single knowledge energy model in the knowledge flow are established, then the general expression of knowledge energy conservation with consideration of the kinetic energy and potential energy of knowledge is built. Then, the knowledge flow rules and their influential factors including complete transfer and incomplete transfer of design knowledge are studied. Finally, the coupling knowledge flows in the knowledge service platform for modern design are analyzed to certify the feasibility of the research work.

A survey of the French creep-fatigue design rules for LMFBR

International Nuclear Information System (INIS)

Tribout, J.; Cordier, G.; Moulin, D.

1987-01-01

The paper provides a survey of the creep-fatigue design rules for the LMFBR in France. These rules are the ones currently implemented in French component manufacturing. The background of each item is discussed and the trends for improvements currently investigated are described. The creep-fatigue rules apply to elastic analysis only. (orig.)

Design and Analysis of Decision Rules via Dynamic Programming

KAUST Repository

Amin, Talha M.

2017-04-24

The areas of machine learning, data mining, and knowledge representation have many different formats used to represent information. Decision rules, amongst these formats, are the most expressive and easily-understood by humans. In this thesis, we use dynamic programming to design decision rules and analyze them. The use of dynamic programming allows us to work with decision rules in ways that were previously only possible for brute force methods. Our algorithms allow us to describe the set of all rules for a given decision table. Further, we can perform multi-stage optimization by repeatedly reducing this set to only contain rules that are optimal with respect to selected criteria. One way that we apply this study is to generate small systems with short rules by simulating a greedy algorithm for the set cover problem. We also compare maximum path lengths (depth) of deterministic and non-deterministic decision trees (a non-deterministic decision tree is effectively a complete system of decision rules) with regards to Boolean functions. Another area of advancement is the presentation of algorithms for constructing Pareto optimal points for rules and rule systems. This allows us to study the existence of “totally optimal” decision rules (rules that are simultaneously optimal with regards to multiple criteria). We also utilize Pareto optimal points to compare and rate greedy heuristics with regards to two criteria at once. Another application of Pareto optimal points is the study of trade-offs between cost and uncertainty which allows us to find reasonable systems of decision rules that strike a balance between length and accuracy.

Method for innovative synthesis-design of chemical process flowsheets

DEFF Research Database (Denmark)

Kumar Tula, Anjan; Gani, Rafiqul

Chemical process synthesis-design involve the identification of the processing route to reach a desired product from a specified set of raw materials, design of the operations involved in the processing route, the calculations of utility requirements, the calculations of waste and emission...... to the surrounding and many more. Different methods (knowledge-based [1], mathematical programming [2], hybrid, etc.) have been proposed and are also currently employed to solve these synthesis-design problems. D’ Anterroches [3] proposed a group contribution based approach to solve the synthesis-design problem...... of chemical processes, where, chemical process flowsheets could be synthesized in the same way as atoms or groups of atoms are synthesized to form molecules in computer aided molecular design (CAMD) techniques [4]. That, from a library of building blocks (functional process-groups) and a set of rules to join...

Examining the Rule of Thumb of Not Using Multilevel Modeling: The "Design Effect Smaller than Two" Rule

Science.gov (United States)

Lai, Mark H. C.; Kwok, Oi-man

2015-01-01

Educational researchers commonly use the rule of thumb of "design effect smaller than 2" as the justification of not accounting for the multilevel or clustered structure in their data. The rule, however, has not yet been systematically studied in previous research. In the present study, we generated data from three different models…

Performance Indicators for Business Rule Management

NARCIS (Netherlands)

Eline de Haan; dr. Martijn Zoet; Koen Smit

2016-01-01

From the article: With increasing investments in business rules management (BRM), organizations are searching for ways to value and benchmark their processes to elicitate, design, accept, deploy and execute business rules. To realize valuation and benchmarking of previously mentioned processes,

Why Rules Matter in Complex Event Processing...and Vice Versa

Science.gov (United States)

Vincent, Paul

Many commercial and research CEP solutions are moving beyond simple stream query languages to more complete definitions of "process" and thence to "decisions" and "actions". And as capabilities increase in event processing capabilities, there is an increasing realization that the humble "rule" is as relevant to the event cloud as it is to specific services. Less obvious is how much event processing has to offer the process and rule execution and management technologies. Does event processing change the way we should manage businesses, processes and services, together with their embedded (and hopefully managed) rulesets?

Design rules for piping: Plastic stability of straight parts under level D loadings

International Nuclear Information System (INIS)

Touboul, F.; Ben Djidia, M.; Acker, D.

1989-01-01

Design rules for piping, elaborated for Fast Breeder Reactors, are based on analysis performed for Pressure Water Reactors. Interpretation of largely diversified straight parts tests, enable us to validate and improve existing rules and to propose a more suitable formula. Design rules for piping appear to be non conservative for austenitic thin tubes in bending or torsion. By introducing a B 2 coefficient, geometrically dependent, the gap between thin and thick tubes may be withheld. Conservatism of rules can be ensured by considering the allowable stress defined by ASME, Section III, Appendix F

Codification of design rules applying to fitting organs of PWR cooling circuits

International Nuclear Information System (INIS)

Grandemange, J.M.; Cereser, W.

1983-01-01

The present paper deals with the presentation of the design rules of fitting organs to be codified within the RCC-M. This presentation concerns level 1 fitting organs which are the most important for the safety of the installation. The conception rules of these materials are codified in the volume B of the tome I of the RCC-M dealing with level 1 materials, chapter B 3000: design, sub-chapter B 3500: fitting organ design. This paper presents the general approach considered, for the establishment of the design rules of the RCC-M. It includes four parts dealing with: historical recall; presentation of aims and of the sense in which the codification works have been undertaken; presentation of the B.3500 structure; discussion about the technical points of this sub-chapter [fr

Transforming process models : executable rewrite rules versus a formalized Java program

NARCIS (Netherlands)

Van Gorp, P.M.E.; Eshuis, H.; Petriu, D.C.; Rouquette, N.

2010-01-01

In the business process management community, transformations for process models are usually programmed using imperative languages (such as Java). The underlying mapping rules tend to be documented using informal visual rules whereas they tend to be formalized using mathematical set constructs. In

Transforming process models : executable rewrite rules versus a formalized Java program

NARCIS (Netherlands)

Van Gorp, P.M.E.; Eshuis, H.

2010-01-01

In the business process management community, transformations for process models are usually programmed using imperative languages. The underlying mapping rules tend to be documented using informal visual rules whereas they tend to be formalized using mathematical set constructs. In the Graph and

Rule-Based Design of Plant Expression Vectors Using GenoCAD.

Science.gov (United States)

Coll, Anna; Wilson, Mandy L; Gruden, Kristina; Peccoud, Jean

2015-01-01

Plant synthetic biology requires software tools to assist on the design of complex multi-genic expression plasmids. Here a vector design strategy to express genes in plants is formalized and implemented as a grammar in GenoCAD, a Computer-Aided Design software for synthetic biology. It includes a library of plant biological parts organized in structural categories and a set of rules describing how to assemble these parts into large constructs. Rules developed here are organized and divided into three main subsections according to the aim of the final construct: protein localization studies, promoter analysis and protein-protein interaction experiments. The GenoCAD plant grammar guides the user through the design while allowing users to customize vectors according to their needs. Therefore the plant grammar implemented in GenoCAD will help plant biologists take advantage of methods from synthetic biology to design expression vectors supporting their research projects.

Attribute Index and Uniform Design Based Multiobjective Association Rule Mining with Evolutionary Algorithm

Directory of Open Access Journals (Sweden)

Jie Zhang

2013-01-01

Full Text Available In association rule mining, evaluating an association rule needs to repeatedly scan database to compare the whole database with the antecedent, consequent of a rule and the whole rule. In order to decrease the number of comparisons and time consuming, we present an attribute index strategy. It only needs to scan database once to create the attribute index of each attribute. Then all metrics values to evaluate an association rule do not need to scan database any further, but acquire data only by means of the attribute indices. The paper visualizes association rule mining as a multiobjective problem rather than a single objective one. In order to make the acquired solutions scatter uniformly toward the Pareto frontier in the objective space, elitism policy and uniform design are introduced. The paper presents the algorithm of attribute index and uniform design based multiobjective association rule mining with evolutionary algorithm, abbreviated as IUARMMEA. It does not require the user-specified minimum support and minimum confidence anymore, but uses a simple attribute index. It uses a well-designed real encoding so as to extend its application scope. Experiments performed on several databases demonstrate that the proposed algorithm has excellent performance, and it can significantly reduce the number of comparisons and time consumption.

Attribute index and uniform design based multiobjective association rule mining with evolutionary algorithm.

Science.gov (United States)

Zhang, Jie; Wang, Yuping; Feng, Junhong

2013-01-01

In association rule mining, evaluating an association rule needs to repeatedly scan database to compare the whole database with the antecedent, consequent of a rule and the whole rule. In order to decrease the number of comparisons and time consuming, we present an attribute index strategy. It only needs to scan database once to create the attribute index of each attribute. Then all metrics values to evaluate an association rule do not need to scan database any further, but acquire data only by means of the attribute indices. The paper visualizes association rule mining as a multiobjective problem rather than a single objective one. In order to make the acquired solutions scatter uniformly toward the Pareto frontier in the objective space, elitism policy and uniform design are introduced. The paper presents the algorithm of attribute index and uniform design based multiobjective association rule mining with evolutionary algorithm, abbreviated as IUARMMEA. It does not require the user-specified minimum support and minimum confidence anymore, but uses a simple attribute index. It uses a well-designed real encoding so as to extend its application scope. Experiments performed on several databases demonstrate that the proposed algorithm has excellent performance, and it can significantly reduce the number of comparisons and time consumption.

Design rules for phase-change materials in data storage applications

Energy Technology Data Exchange (ETDEWEB)

Lencer, Dominic; Salinga, Martin [I. Physikalisches Institut IA, RWTH Aachen University, 52056 Aachen (Germany); Wuttig, Matthias [I. Physikalisches Institut IA, RWTH Aachen University, 52056 Aachen (Germany); Juelich-Aachen Research Alliance, Section Fundamentals of Future Information Technology (JARA-FIT), 52056 Aachen (Germany)

2011-05-10

Phase-change materials can rapidly and reversibly be switched between an amorphous and a crystalline phase. Since both phases are characterized by very different optical and electrical properties, these materials can be employed for rewritable optical and electrical data storage. Hence, there are considerable efforts to identify suitable materials, and to optimize them with respect to specific applications. Design rules that can explain why the materials identified so far enable phase-change based devices would hence be very beneficial. This article describes materials that have been successfully employed and discusses common features regarding both typical structures and bonding mechanisms. It is shown that typical structural motifs and electronic properties can be found in the crystalline state that are indicative for resonant bonding, from which the employed contrast originates. The occurence of resonance is linked to the composition, thus providing a design rule for phase-change materials. This understanding helps to unravel characteristic properties such as electrical and thermal conductivity which are discussed in the subsequent section. Then, turning to the transition kinetics between the phases, the current understanding and modeling of the processes of amorphization and crystallization are discussed. Finally, present approaches for improved high-capacity optical discs and fast non-volatile electrical memories, that hold the potential to succeed present-day's Flash memory, are presented. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Design rules for phase-change materials in data storage applications.

Science.gov (United States)

Lencer, Dominic; Salinga, Martin; Wuttig, Matthias

2011-05-10

Phase-change materials can rapidly and reversibly be switched between an amorphous and a crystalline phase. Since both phases are characterized by very different optical and electrical properties, these materials can be employed for rewritable optical and electrical data storage. Hence, there are considerable efforts to identify suitable materials, and to optimize them with respect to specific applications. Design rules that can explain why the materials identified so far enable phase-change based devices would hence be very beneficial. This article describes materials that have been successfully employed and dicusses common features regarding both typical structures and bonding mechanisms. It is shown that typical structural motifs and electronic properties can be found in the crystalline state that are indicative for resonant bonding, from which the employed contrast originates. The occurence of resonance is linked to the composition, thus providing a design rule for phase-change materials. This understanding helps to unravel characteristic properties such as electrical and thermal conductivity which are discussed in the subsequent section. Then, turning to the transition kinetics between the phases, the current understanding and modeling of the processes of amorphization and crystallization are discussed. Finally, present approaches for improved high-capacity optical discs and fast non-volatile electrical memories, that hold the potential to succeed present-day's Flash memory, are presented. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Approach to design neural cryptography: a generalized architecture and a heuristic rule.

Science.gov (United States)

Mu, Nankun; Liao, Xiaofeng; Huang, Tingwen

2013-06-01

Neural cryptography, a type of public key exchange protocol, is widely considered as an effective method for sharing a common secret key between two neural networks on public channels. How to design neural cryptography remains a great challenge. In this paper, in order to provide an approach to solve this challenge, a generalized network architecture and a significant heuristic rule are designed. The proposed generic framework is named as tree state classification machine (TSCM), which extends and unifies the existing structures, i.e., tree parity machine (TPM) and tree committee machine (TCM). Furthermore, we carefully study and find that the heuristic rule can improve the security of TSCM-based neural cryptography. Therefore, TSCM and the heuristic rule can guide us to designing a great deal of effective neural cryptography candidates, in which it is possible to achieve the more secure instances. Significantly, in the light of TSCM and the heuristic rule, we further expound that our designed neural cryptography outperforms TPM (the most secure model at present) on security. Finally, a series of numerical simulation experiments are provided to verify validity and applicability of our results.

Consideration of creep in design rules of AFCEN RCC-MRx 2012 code

International Nuclear Information System (INIS)

Lebarbe, T.; Petesch, C.; Lejeail, Y.; Lamagnere, P.; Dubiez-Le Goff, S.

2014-01-01

The 2012 edition of the RCC-MRx Code has been issued in French and English versions by AFCEN (Association Francaise pour les regles de Conception et de Construction des Materiels des Chaudieres Electro-nucleaires). This Code is the result of the merger of the RCC-MX 2008 developed in the context of the research reactor Jules Horowitz Reactor project, in the RCC-MR 2007 which set up rules applicable to the design of components operating at high temperature and to the Vacuum Vessel of ITER. This new edition is the opportunity to publish also the background of the rules. This paper is one illustration of what may be such a document, on a dedicated example, the creep rules. It contains an overview of the design rules associated to the creep damage and explains the purpose and the origins of these rules. This type of exercise is going to be generalized to all the parts of the code in AFCEN technical publications, the criteria. (authors)

Heuristic rules analysis on the fuel cells design using greedy search

International Nuclear Information System (INIS)

Ortiz, J. J.; Castillo, J. A.; Montes, J. L.; Hernandez, J. L.

2009-10-01

This work approaches the study of one of the heuristic rules of fuel cells design for boiling water nuclear reactors. This rule requires that the minor uranium enrichment is placed in the corners of the fuel cell. Also the search greedy is applied for the fuel cells design where explicitly does not take in count this rule, allowing the possibility to place any uranium enrichment with the condition that it does not contain gadolinium. Results are shown in the quality of the obtained cell by search greedy when it considers the rule and when not. The cell quality is measured with the value of the power pick factor obtained, as well as of the neutrons multiplication factor in an infinite medium. Cells were analyzed with 1 and 2 gadolinium concentrations low operation conditions at 120% of the nominal power of the reactors of the nuclear power plant of Laguna Verde. The results show that not to consider the rule in cells with a single gadolinium concentration, it has as repercussion that the greedy search has a minor performance. On the other hand with cells of two gadolinium concentrations, the performance of the greedy search was better. (Author)

Player Experiences and Behaviors in a Multiplayer Game: designing game rules to change interdependent behavior

Directory of Open Access Journals (Sweden)

Niko Vegt

2016-12-01

Full Text Available Serious gaming is used as a means for improving organizational teamwork, yet little is known about the effect of individual game elements constituting serious games. This paper presents a game design experiment aimed at generating knowledge on designing game elements for teamwork. In previous work, we suggested that interaction- and goal-driven rules could guide interdependence and teamwork strategies. Based on this finding, for the present experiment we developed two versions of multiplayer Breakout, varying in rule-sets, designed to elicit player strategies of either dependent competition or dependent cooperation. Results showed that the two rule-sets could generate distinct reported player experiences and observable distinct player behaviors that could be further discriminated into four patterns: expected patterns of helping and ignoring, and unexpected patterns of agreeing and obstructing. Classic game theory was applied to understand the four behavior patterns and made us conclude that goal-driven rules steered players towards competition and cooperation. Interaction rules, in contrast, mainly stimulated dependent competitive behavior, e.g. obstructing each other. Since different types of rules thus led to different player behavior, discriminating in game design between interaction- and goal-driven rules seems relevant. Moreover, our research showed that game theory proved to be useful for understanding goal-driven rules.

Design methodology for the physical protection upgrade rule requirements for fixed sites. Technical report

International Nuclear Information System (INIS)

Evans, L.J. Jr.; Allen, T.

1980-06-01

This Design Methodology document aids the licensee in understanding how the fixed site requirements of the Physical Protection Upgrade Rule affect the design of physical protection systems for fuel processing plants, fuel manufacturing plants, or other fixed site special nuclear material operations involving possession or use of formula quantities of strategic special nuclear material. The document consists of three major elements: Logic Trees, Safeguards Jobs and Component Matrices, and Effectiveness Test Questionnaires. The work is based upon a previous study conducted by Sandia Laboratories for the Nuclear Regulatory Commission

Austenitic stainless steels, status of the properties database and design rule development

Energy Technology Data Exchange (ETDEWEB)

Tavassoli, A.-A. [Commissariat a l`Energie Atomique, CEA-Saclay, Gif-sur Yvette (France). CEREM; Touboul, F. [DMT, Commissariat a l`Energie Atomique, CEA Saclay, Gif-sur-Yvette (France)

1996-10-01

In parallel with the new tasks initiated to substantiate the existing database for the reference structural material (type 316LN-IG) of ITER, interim design criteria are being developed to guide subsequent design stages. The French RCC-MR codes for fast breeder reactors, incorporating rules from other ITER partner codes and those needed to meet specific fusion requirements, are used for this purpose. This paper presents the current status of materials data and design rules for type 316LN-IG steel and describes how the irradiation effects are taken into account. (orig.).

Understanding the Canadian adult CT head rule trial: use of the theoretical domains framework for process evaluation

Directory of Open Access Journals (Sweden)

Curran Janet A

2013-02-01

Full Text Available Abstract Background The Canadian CT Head Rule was prospectively derived and validated to assist clinicians with diagnostic decision-making regarding the use of computed tomography (CT in adult patients with minor head injury. A recent intervention trial failed to demonstrate a decrease in the rate of head CTs following implementation of the rule in Canadian emergency departments. Yet, the same intervention, which included a one-hour educational session and reminders at the point of requisition, was successful in reducing cervical spine imaging rates in the same emergency departments. The reason for the varied effect of the intervention across these two behaviours is unclear. There is an increasing appreciation for the use of theory to conduct process evaluations to better understand how strategies are linked with outcomes in implementation trials. The Theoretical Domains Framework (TDF has been used to explore health professional behaviour and to design behaviour change interventions but, to date, has not been used to guide a theory-based process evaluation. In this proof of concept study, we explored whether the TDF could be used to guide a retrospective process evaluation to better understand emergency physicians’ responses to the interventions employed in the Canadian CT Head Rule trial. Methods A semi-structured interview guide, based on the 12 domains from the TDF, was used to conduct telephone interviews with project leads and physician participants from the intervention sites in the Canadian CT Head Rule trial. Two reviewers independently coded the anonymised interview transcripts using the TDF as a coding framework. Relevant domains were identified by: the presence of conflicting beliefs within a domain; the frequency of beliefs; and the likely strength of the impact of a belief on the behaviour. Results Eight physicians from four of the intervention sites in the Canadian CT Head Rule trial participated in the interviews. Barriers

Systematic construction of qualitative physics-based rules for process diagnostics

International Nuclear Information System (INIS)

Reifman, J.; Wei, T.Y.C.

1995-01-01

A novel first-principles-based expert system is proposed for on-line detection and identification of faulty component candidates during incipient off-normal process operations. The system performs function-oriented diagnostics and can be reused for diagnosing single-component failures in different processes and different plants through the provision of the appropriate process schematics information. The function-oriented and process-independent diagnostic features of the proposed expert system are achieved by constructing a knowledge base containing three distinct types of information, qualitative balance equation rules, functional classification of process components, and the process piping and instrumentation diagram. The various types of qualitative balance equation rules for processes utilizing single-phase liquids are derived and their usage is illustrated through simulation results of a realistic process in a nuclear power plant

Design and construction rules for electrical equipments of nuclear islands. 3. ed.

International Nuclear Information System (INIS)

1993-01-01

The French design and construction for electrical equipments of nuclear islands (RCC-E) deals with equipments of which the failure may have consequences on the safety of persons or appreciable effects on the availability of the power plant. This book presents the rules concerning (1) qualification procedure, (2) the design of functional units, (3) the installation (environmental conditions, protection rules), (4) the constituent elements of equipments, (5) the control and testing methods

Electromagnetic compatibility design and cabling system rules; Regles de conception et de cablage des systemes electroniques

Energy Technology Data Exchange (ETDEWEB)

Raimbourg, J.

2009-07-01

This report is devoted to establish EMC (Electromagnetic Compatibility) design and cabling system rules. It is intended for hardware designers in charge of designing electronic maps or integrating existing materials into a comprehensive system. It is a practical guide. The rules described in this document do not require enhanced knowledge of advanced mathematical or physical concepts. The key point is to understand phenomena with a pragmatic approach to highlight the design and protection rules. (author)

RCC-MRx: Design and construction rules for mechanical components in high-temperature structures, experimental reactors and fusion reactors

International Nuclear Information System (INIS)

2015-01-01

The RCC-MRx code was developed for sodium-cooled fast reactors (SFR), research reactors (RR) and fusion reactors (FR-ITER). It provides the rules for designing and building mechanical components involved in areas subject to significant creep and/or significant irradiation. In particular, it incorporates an extensive range of materials (aluminum and zirconium alloys in response to the need for transparency to neutrons), sizing rules for thin shells and box structures, and new modern welding processes: electron beam, laser beam, diffusion and brazing. The RCC-MR code was used to design and build the prototype Fast Breeder Reactor (PFBR) developed by IGCAR in India and the ITER Vacuum Vessel. The RCC-Mx code is being used in the current construction of the RJH experimental reactor (Jules Horowitz reactor). The RCC-MRx code is serving as a reference for the design of the ASTRID project (Advanced Sodium Technological Reactor for Industrial Demonstration), for the design of the primary circuit in MYRRHA (Multi-purpose hybrid Research Reactor for High-tech Applications) and the design of the target station of the ESS project (European Spallation Source). Contents of the 2015 edition of the RCC-MRx code: Section I General provisions; Section II Additional requirements and special provisions; Section III Rules for nuclear installation mechanical components: Volume I: Design and construction rules: Volume A (RA): General provisions and entrance keys, Volume B (RB): Class 1 components and supports, Volume C (RC): Class 2 components and supports, Volume D (RD): Class 3 components and supports, Volume K (RK): Examination, handling or drive mechanisms, Volume L (RL): Irradiation devices, Volume Z (Ai): Technical appendices; Volume II: Materials; Volume III: Examinations methods; Volume IV: Welding; Volume V: Manufacturing operations; Volume VI: Probationary phase rules

Process synthesis, design and analysis using a process-group contribution method

DEFF Research Database (Denmark)

Kumar Tula, Anjan; Eden, Mario R.; Gani, Rafiqul

2015-01-01

) techniques. The fundamental pillars of this framework are the definition and use of functional process-groups (building blocks) representing a wide range of process operations, flowsheet connectivity rules to join the process-groups to generate all the feasible flowsheet alternatives and flowsheet property...... models like energy consumption, atom efficiency, environmental impact to evaluate the performance of the generated alternatives. In this way, a list of feasible flowsheets are quickly generated, screened and selected for further analysis. Since the flowsheet is synthesized and the operations......This paper describes the development and application of a process-group contribution method to model, simulate and synthesize chemical processes. Process flowsheets are generated in the same way as atoms or groups of atoms are combined to form molecules in computer aided molecular design (CAMD...

Surrogate-Assisted Genetic Programming With Simplified Models for Automated Design of Dispatching Rules.

Science.gov (United States)

Nguyen, Su; Zhang, Mengjie; Tan, Kay Chen

2017-09-01

Automated design of dispatching rules for production systems has been an interesting research topic over the last several years. Machine learning, especially genetic programming (GP), has been a powerful approach to dealing with this design problem. However, intensive computational requirements, accuracy and interpretability are still its limitations. This paper aims at developing a new surrogate assisted GP to help improving the quality of the evolved rules without significant computational costs. The experiments have verified the effectiveness and efficiency of the proposed algorithms as compared to those in the literature. Furthermore, new simplification and visualisation approaches have also been developed to improve the interpretability of the evolved rules. These approaches have shown great potentials and proved to be a critical part of the automated design system.

Formulation of the verbal thought process based on generative rules

Energy Technology Data Exchange (ETDEWEB)

Suehiro, N; Fujisaki, H

1984-01-01

As assumption is made on the generative nature of the verbal thought process, based on an analogy between language use and verbal thought. A procedure is then presented for acquiring the set of generative rules from a given set of concept strings, leading to an efficient representation of verbal knowledge. The non-terminal symbols derived in the acquisition process are found to correspond to concepts and superordinate concepts in the human process of verbal thought. The validity of the formulation and the efficiency of knowledge representation is demonstrated by an example in which knowledge of biological properties of animals is reorganized into a set of generative rules. The process of inductive inference is then defined as a generalization of the acquired knowledge, and the principle of maximum simplicity of rules is proposed as a possible criterion for such generalization. The proposal is also tested by an example in which only a small part of a systematic body of knowledge is utilized to make interferences on the unknown parts of the system. 6 references.

Effect of Linked Rules on Business Process Model Understanding

DEFF Research Database (Denmark)

Wang, Wei; Indulska, Marta; Sadiq, Shazia

2017-01-01

Business process models are widely used in organizations by information systems analysts to represent complex business requirements and by business users to understand business operations and constraints. This understanding is extracted from graphical process models as well as business rules. Prior...

Verification of design rules for EUROFER under TBM operating conditions

International Nuclear Information System (INIS)

Sunyk, R.; Aktaa, J.

2007-01-01

The aim of the activity presented in this work is, firstly, an evaluation of existing design rules considered for austenitic steels exhibiting cycle-by-cycle hardening, in contrast to the reduced-activation ferritic-martensitic steels (RAFM), which soften under cyclic loading. Secondly, we are aimed in a definition of the range of operating temperatures and loads for the current design of the test blanket module (TBM). Results of cycling tests of the EUROFER 97 have been thereby used to adjust material parameters needed for an ABAQUS-own combined non-linear isotropic-kinematic hardening model. Furthermore, a visco-plastic material model considering material damage and implemented recently as an ABAQUS user material (UMAT) has been also applied for simulations. Some important design rules within the elastic route have been evaluated and their predictions have been compared to results of cyclic simulations using the advanced material models mentioned above

75 FR 52860 - Final Airworthiness Design Standards for Acceptance Under the Primary Category Rule; Orlando...

Science.gov (United States)

2010-08-30

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 21 Final Airworthiness Design Standards for Acceptance Under the Primary Category Rule; Orlando Helicopter Airways (OHA), Inc... Existence of Proposed Airworthiness Design Standards for Acceptance Under the Primary Category Rule; Orlando...

Development of rules for design at elevated temperatures (the RAMSES-group)

International Nuclear Information System (INIS)

Schaller, K.H.; Jakubowicz, H.; Petrequin, P.; Roche, R.; Weisz, M.

1977-01-01

The design of structures of liquid-metal-cooled fast breeder reactors of the pool-type in France has to correspond to the national regulations and takes into account the rules adopted by other countries, essentially the U.S. ASME-CODE Ill and the CODE CASE 1592 for elevated temperatures. The existing rules need complements or modifications for the following reasons: the materials employed are not covered exactly by the specifications; the properties given are not necessarily equivalent; the simplified rules (normally on the base of an elastic calculation) are often penalizing as are not valid for the type of loads considered (an example are the ratcheting rules); the use of some rules, for example the creep-fatigue interaction tends to overestimate the safety-coefficients really obtained (long tensile-hold-time followed by a transient in compression is the best example for the austenitic-type steels); the environmental effects are excluded. The French Atomic Energy Commission has founded, for the reasons mentioned above, a working group, the RAMSES-GROUP (Regles d'Analyse Mecanique des Structures), in order to codify the information needed, taking into account the experience obtained in more than ten years of fast-reactor operation. The group, including experts of three departments (DMECN, DEMT, DRNR) has adopted a number of recommendations; projects of recommendations and basic experimental work are on going. The final scope is to obtain a coherent network of rules for the design of structures in the elevated-temperature range. The already adopted recommendations codify the characteristics of the materials mainly employed in the primary system ready for use in finite element computer programs and the procedures to follow for analysis. As inelastic stress-and strain-evaluations have become possible economically by use of programs of the CEASEMT-SYSTEM, the problem of simplified rules based on elastic computations can be very often avoided

31 CFR 501.703 - Overview of civil penalty process and construction of rules.

Science.gov (United States)

2010-07-01

... process and construction of rules. (a) The administrative process for enforcing TWEA sanctions programs... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Overview of civil penalty process and construction of rules. 501.703 Section 501.703 Money and Finance: Treasury Regulations Relating to Money and...

EPE fundamentals and impact of EUV: Will traditional design-rule calculations work in the era of EUV?

Science.gov (United States)

Gabor, Allen H.; Brendler, Andrew C.; Brunner, Timothy A.; Chen, Xuemei; Culp, James A.; Levinson, Harry J.

2018-03-01

The relationship between edge placement error, semiconductor design-rule determination and predicted yield in the era of EUV lithography is examined. This paper starts with the basics of edge placement error and then builds up to design-rule calculations. We show that edge placement error (EPE) definitions can be used as the building blocks for design-rule equations but that in the last several years the term "EPE" has been used in the literature to refer to many patterning errors that are not EPE. We then explore the concept of "Good Fields"1 and use it predict the n-sigma value needed for design-rule determination. Specifically, fundamental yield calculations based on the failure opportunities per chip are used to determine at what n-sigma "value" design-rules need to be tested to ensure high yield. The "value" can be a space between two features, an intersect area between two features, a minimum area of a feature, etc. It is shown that across chip variation of design-rule important values needs to be tested at sigma values between seven and eight which is much higher than the four-sigma values traditionally used for design-rule determination. After recommending new statistics be used for design-rule calculations the paper examines the impact of EUV lithography on sources of variation important for design-rule calculations. We show that stochastics can be treated as an effective dose variation that is fully sampled across every chip. Combining the increased within chip variation from EUV with the understanding that across chip variation of design-rule important values needs to not cause a yield loss at significantly higher sigma values than have traditionally been looked at, the conclusion is reached that across-wafer, wafer-to-wafer and lot-to-lot variation will have to overscale for any technology introducing EUV lithography where stochastic noise is a significant fraction of the effective dose variation. We will emphasize stochastic effects on edge placement

On the design of design processes in architecture and engineering : technological rules and the principle of minimal specification

NARCIS (Netherlands)

Aken, van J.E.

2003-01-01

As complexity and scale of design processes in architecture and in engineering increase, as well as the demands on these processes with respect to costs, throughput time and quality, traditional approaches to organise and plan these processes may no longer suffice. In this conceptual article it is

Process-based organization design and hospital efficiency.

Science.gov (United States)

Vera, Antonio; Kuntz, Ludwig

2007-01-01

The central idea of process-based organization design is that organizing a firm around core business processes leads to cost reductions and quality improvements. We investigated theoretically and empirically whether the implementation of a process-based organization design is advisable in hospitals. The data came from a database compiled by the Statistical Office of the German federal state of Rheinland-Pfalz and from a written questionnaire, which was sent to the chief executive officers (CEOs) of all 92 hospitals in this federal state. We used data envelopment analysis (DEA) to measure hospital efficiency, and factor analysis and regression analysis to test our hypothesis. Our principal finding is that a high degree of process-based organization has a moderate but significant positive effect on the efficiency of hospitals. The main implication is that hospitals should implement a process-based organization to improve their efficiency. However, to actually achieve positive effects on efficiency, it is of paramount importance to observe some implementation rules, in particular to mobilize physician participation and to create an adequate organizational culture.

Design issues of a reinforcement-based self-learning fuzzy controller for petrochemical process control

Science.gov (United States)

Yen, John; Wang, Haojin; Daugherity, Walter C.

1992-01-01

Fuzzy logic controllers have some often-cited advantages over conventional techniques such as PID control, including easier implementation, accommodation to natural language, and the ability to cover a wider range of operating conditions. One major obstacle that hinders the broader application of fuzzy logic controllers is the lack of a systematic way to develop and modify their rules; as a result the creation and modification of fuzzy rules often depends on trial and error or pure experimentation. One of the proposed approaches to address this issue is a self-learning fuzzy logic controller (SFLC) that uses reinforcement learning techniques to learn the desirability of states and to adjust the consequent part of its fuzzy control rules accordingly. Due to the different dynamics of the controlled processes, the performance of a self-learning fuzzy controller is highly contingent on its design. The design issue has not received sufficient attention. The issues related to the design of a SFLC for application to a petrochemical process are discussed, and its performance is compared with that of a PID and a self-tuning fuzzy logic controller.

Scaling Rule for Very Shallow Trench IGBT toward CMOS Process Compatibility

OpenAIRE

Tanaka, Masahiro; Omura, Ichiro

2012-01-01

Deep trench gate is used for latest IGBT to improve device performance. By large difference from deep submicron CMOS structure, there is no process compatibility among CMOS device and trench gate IGBT. We propose IGBT scaling rule for shrinking IGBT cell structure both horizontally and vertically. The scaling rule is theoretically delivered by structure based equations. Device performance improvement was also predicted by TCAD simulations even with very shallow trench gate. The rule enables t...

Design of a Fuzzy Rule Base Expert System to Predict and Classify ...

African Journals Online (AJOL)

The main objective of design of a rule base expert system using fuzzy logic approach is to predict and forecast the risk level of cardiac patients to avoid sudden death. In this proposed system, uncertainty is captured using rule base and classification using fuzzy c-means clustering is discussed to overcome the risk level, ...

Design rules to prevent from elasto-plastic bucking

International Nuclear Information System (INIS)

Autrusson, B.; Acker, D.

1986-10-01

The development of fast neutron reactors requires the construction of mechanical structures which are subject to thermal transients. These structures being thin, there is a risk of important buckling. Studies developed in the general framework of dimensioning propose a simplified method. This method is based on the determination of the elastic critical load of the perfect structure and its correction by a reduction coefficient which takes into account the effect of tolerances, plasticity and a possible instable post-critical behavior. This paper presents this method and its experimental validation, as also a comparison with the rules proposed by the CODAP 80 (C4 41) for structures subject to an external pressure load. This method has been introduced in the French Rules of design and construction of fast neutron reactor mechanical components (RCC-MR) [fr

Presentation of the RCC-M design and construction rule

International Nuclear Information System (INIS)

Quero, J.R.

1983-03-01

Presentation of the French rules for design and construction of nuclear power plant components: stress resistance, material choice, fabrication and quality control, control methodology etc... covering equipments such as pressurized components (tanks, exchangers, pipes, pumps, valves and fittings), internal and support reactor elements and non pressurized small devices [fr

Learning CAD at University through Summaries of the Rules of Design Intent

Science.gov (United States)

Barbero, Basilio Ramos; Pedrosa, Carlos Melgosa; Samperio, Raúl Zamora

2017-01-01

The ease with which 3D CAD models may be modified and reused are two key aspects that improve the design-intent variable and that can significantly shorten the development timelines of a product. A set of rules are gathered from various authors that take different 3D modelling strategies into account. These rules are then applied to CAD…

Guidelines for the design of the working rules of the guarantee and quality control in radiotherapy commission

International Nuclear Information System (INIS)

Pardo, J.; Galmes, M.A.; Font, J.; Caro, J.; Serra, J.; Mata, F.; Bertan, S.; Biete, A.; Carceller, J.A.; Esco, R.; Palacios, A.; Veiras, C.; Vazquez, M.G.

2001-01-01

The 1566/1988 Royal Decree stated on July 17 th , focused on Quality Criteria in Radiation Therapy, was published in the Official Spanish Gazette on August 28 th . Its publication began a self-analysis process in all the Spanish Radiation Oncology Departments due to the fact that it implies the guidelines elaboration of each step of the radiation therapy process, including the patient post-treatment follow up and the equipment quality control. The Royal Decree orders the managers of the hospitals and facilities that have a radiation oncology department to create the Guarantee and Quality Control in Radiotherapy Commission. According to the Spanish law regulations, every single commission must have its own working rules based on the Chapter II, focused in 'Organos Colegiados', of the 30/1992 Law stated on November 27 th about Public Administration Legal Rules. The Guidelines for the design of the Guarantee and Quality Control in Radiotherapy Commission Working Rules here presented, have been done by consensus in Son Dureta University Hospital and afterwards sent to all Radiation Oncology Departments by the Spanish Society for Radiotherapy and Oncology. (author)

Stabilization and analytical tuning rule of double-loop control scheme for unstable dead-time process

Science.gov (United States)

Ugon, B.; Nandong, J.; Zang, Z.

2017-06-01

The presence of unstable dead-time systems in process plants often leads to a daunting challenge in the design of standard PID controllers, which are not only intended to provide close-loop stability but also to give good performance-robustness overall. In this paper, we conduct stability analysis on a double-loop control scheme based on the Routh-Hurwitz stability criteria. We propose to use this unstable double-loop control scheme which employs two P/PID controllers to control first-order or second-order unstable dead-time processes typically found in process industries. Based on the Routh-Hurwitz stability necessary and sufficient criteria, we establish several stability regions which enclose within them the P/PID parameter values that guarantee close-loop stability of the double-loop control scheme. A systematic tuning rule is developed for the purpose of obtaining the optimal P/PID parameter values within the established regions. The effectiveness of the proposed tuning rule is demonstrated using several numerical examples and the result are compared with some well-established tuning methods reported in the literature.

Conformance Testing: Measurement Decision Rules

Science.gov (United States)

Mimbs, Scott M.

2010-01-01

The goal of a Quality Management System (QMS) as specified in ISO 9001 and AS9100 is to provide assurance to the customer that end products meet specifications. Measuring devices, often called measuring and test equipment (MTE), are used to provide the evidence of product conformity to specified requirements. Unfortunately, processes that employ MTE can become a weak link to the overall QMS if proper attention is not given to the measurement process design, capability, and implementation. Documented "decision rules" establish the requirements to ensure measurement processes provide the measurement data that supports the needs of the QMS. Measurement data are used to make the decisions that impact all areas of technology. Whether measurements support research, design, production, or maintenance, ensuring the data supports the decision is crucial. Measurement data quality can be critical to the resulting consequences of measurement-based decisions. Historically, most industries required simplistic, one-size-fits-all decision rules for measurements. One-size-fits-all rules in some cases are not rigorous enough to provide adequate measurement results, while in other cases are overly conservative and too costly to implement. Ideally, decision rules should be rigorous enough to match the criticality of the parameter being measured, while being flexible enough to be cost effective. The goal of a decision rule is to ensure that measurement processes provide data with a sufficient level of quality to support the decisions being made - no more, no less. This paper discusses the basic concepts of providing measurement-based evidence that end products meet specifications. Although relevant to all measurement-based conformance tests, the target audience is the MTE end-user, which is anyone using MTE other than calibration service providers. Topics include measurement fundamentals, the associated decision risks, verifying conformance to specifications, and basic measurement

Final Rule for Industrial Process Cooling Towers: Fact Sheet

Science.gov (United States)

Fact sheet concerning a final rule to reduce air toxics emissions from industrial process cooling towers. Air toxics are those pollutants known or suspected of causing cancer or other serious health effects.

Rules and procedures for the design and operation of hazardous research equipment

International Nuclear Information System (INIS)

1978-12-01

The manual has been prepared for use by research personnel involved in experiments at the Lawrence Berkeley Laboratory. It contains rules and procedures for the design, test, installation, and operation of hazardous research equipment. Sect. I contains such information as responsibility of experimenters for safety, descriptions of the various Laboratory safety organizations, and enumeration of various services available to experimenters at the Laboratory. Sect. II describes specific rules for the setup and operation of experimental equipment at the Laboratory. Sect. III gives detailed design criteria and procedures for equipment frequently encountered in the high energy physics laboratory

Basis of the tubesheet heat exchanger design rules used in the French pressure vessel code

International Nuclear Information System (INIS)

Osweiller, F.

1990-01-01

For about 40 years most tubesheet heat exchangers have been designed according to the standards of TEMA. Partly due to their simplicity, these rules do not assure a safe heat-exchangers design in all cases. This is the main reason why new tubesheet design rules were developed in 1981 in France for the French pressure vessel code CODAP. For fixed tubesheet heat exchangers the new rules account for the elastic rotational restraint of the shell and channel at the outer edge of the tubesheet. For floating-head and U- tube exchangers an approach was selected with some modifications. In both cases the tubesheet is replaced by an equivalent solid plate with adequate effective elastic constants, and the tube bundle is simulated by an elastic foundation. The elastic restraint at the edge of the tubesheet due the shell and channel is accounted for in different ways in the two types of heat exchangers. The purpose of the paper is to present the main basis of these rules and to compare them to TEMA rules

A New Trend-Following Indicator: Using SSA to Design Trading Rules

Science.gov (United States)

Leles, Michel Carlo Rodrigues; Mozelli, Leonardo Amaral; Guimarães, Homero Nogueira

Singular Spectrum Analysis (SSA) is a non-parametric approach that can be used to decompose a time-series as trends, oscillations and noise. Trend-following strategies rely on the principle that financial markets move in trends for an extended period of time. Moving Averages (MAs) are the standard indicator to design such strategies. In this study, SSA is used as an alternative method to enhance trend resolution in comparison with the traditional MA. New trading rules using SSA as indicator are proposed. This paper shows that for the Down Jones Industrial Average (DJIA) and Shangai Securities Composite Index (SSCI) time-series the SSA trading rules provided, in general, better results in comparison to MA trading rules.

Hadronic final states and sum rules in deep inelastic processes

International Nuclear Information System (INIS)

Pal, B.K.

1977-01-01

In order to get maximum information on the hadronic final states and sum rules in deep inelastic processes, Regge phenomenology and quarks parton model have been used. The unified picture for the production of hadrons of type i as a function of Bjorken and Feyman variables with only one adjustable parameter is formulated. The results of neutrino experiments and the production of charm particles are discussed in sum rules. (author)

Generative design visualize, program, and create with processing

CERN Document Server

Bohnacker, Hartmut; Laub, Julia; Lazzeroni, Claudius

2012-01-01

Generative design is a revolutionary new method of creating artwork, models, and animations from sets of rules, or algorithms. By using accessible programming languages such as Processing, artists and designers are producing extravagant, crystalline structures that can form the basis of anything from patterned textiles and typography to lighting, scientific diagrams, sculptures, films, and even fantastical buildings. Opening with a gallery of thirty-five illustrated case studies, Generative Design takes users through specific, practical instructions on how to create their own visual experiments by combining simple-to-use programming codes with basic design principles. A detailed handbook of advanced strategies provides visual artists with all the tools to achieve proficiency. Both a how-to manual and a showcase for recent work in this exciting new field, Generative Design is the definitive study and reference book that designers have been waiting for.

Multi-Criteria Approach in Multifunctional Building Design Process

Science.gov (United States)

Gerigk, Mateusz

2017-10-01

The paper presents new approach in multifunctional building design process. Publication defines problems related to the design of complex multifunctional buildings. Currently, contemporary urban areas are characterized by very intensive use of space. Today, buildings are being built bigger and contain more diverse functions to meet the needs of a large number of users in one capacity. The trends show the need for recognition of design objects in an organized structure, which must meet current design criteria. The design process in terms of the complex system is a theoretical model, which is the basis for optimization solutions for the entire life cycle of the building. From the concept phase through exploitation phase to disposal phase multipurpose spaces should guarantee aesthetics, functionality, system efficiency, system safety and environmental protection in the best possible way. The result of the analysis of the design process is presented as a theoretical model of the multifunctional structure. Recognition of multi-criteria model in the form of Cartesian product allows to create a holistic representation of the designed building in the form of a graph model. The proposed network is the theoretical base that can be used in the design process of complex engineering systems. The systematic multi-criteria approach makes possible to maintain control over the entire design process and to provide the best possible performance. With respect to current design requirements, there are no established design rules for multifunctional buildings in relation to their operating phase. Enrichment of the basic criteria with functional flexibility criterion makes it possible to extend the exploitation phase which brings advantages on many levels.

Incorporation of negative rules and evolution of a fuzzy controller for yeast fermentation process.

Science.gov (United States)

Birle, Stephan; Hussein, Mohamed Ahmed; Becker, Thomas

2016-08-01

The control of bioprocesses can be very challenging due to the fact that these kinds of processes are highly affected by various sources of uncertainty like the intrinsic behavior of the used microorganisms. Due to the reason that these kinds of process uncertainties are not directly measureable in most cases, the overall control is either done manually because of the experience of the operator or intelligent expert systems are applied, e.g., on the basis of fuzzy logic theory. In the latter case, however, the control concept is mainly represented by using merely positive rules, e.g., "If A then do B". As this is not straightforward with respect to the semantics of the human decision-making process that also includes negative experience in form of constraints or prohibitions, the incorporation of negative rules for process control based on fuzzy logic is emphasized. In this work, an approach of fuzzy logic control of the yeast propagation process based on a combination of positive and negative rules is presented. The process is guided along a reference trajectory for yeast cell concentration by alternating the process temperature. The incorporation of negative rules leads to a much more stable and accurate control of the process as the root mean squared error of reference trajectory and system response could be reduced by an average of 62.8 % compared to the controller using only positive rules.

From rule to response: neuronal processes in the premotor and prefrontal cortex.

Science.gov (United States)

Wallis, Jonathan D; Miller, Earl K

2003-09-01

The ability to use abstract rules or principles allows behavior to generalize from specific circumstances (e.g., rules learned in a specific restaurant can subsequently be applied to any dining experience). Neurons in the prefrontal cortex (PFC) encode such rules. However, to guide behavior, rules must be linked to motor responses. We investigated the neuronal mechanisms underlying this process by recording from the PFC and the premotor cortex (PMC) of monkeys trained to use two abstract rules: "same" or "different." The monkeys had to either hold or release a lever, depending on whether two successively presented pictures were the same or different, and depending on which rule was in effect. The abstract rules were represented in both regions, although they were more prevalent and were encoded earlier and more strongly in the PMC. There was a perceptual bias in the PFC, relative to the PMC, with more PFC neurons encoding the presented pictures. In contrast, neurons encoding the behavioral response were more prevalent in the PMC, and the selectivity was stronger and appeared earlier in the PMC than in the PFC.

Pattern centric design based sensitive patterns and process monitor in manufacturing

Science.gov (United States)

Hsiang, Chingyun; Cheng, Guojie; Wu, Kechih

2017-03-01

When design rule is mitigating to smaller dimension, process variation requirement is tighter than ever and challenges the limits of device yield. Masks, lithography, etching and other processes have to meet very tight specifications in order to keep defect and CD within the margins of the process window. Conventionally, Inspection and metrology equipments are utilized to monitor and control wafer quality in-line. In high throughput optical inspection, nuisance and review-classification become a tedious labor intensive job in manufacturing. Certain high-resolution SEM images are taken to validate defects after optical inspection. These high resolution SEM images catch not only optical inspection highlighted point, also its surrounding patterns. However, this pattern information is not well utilized in conventional quality control method. Using this complementary design based pattern monitor not only monitors and analyzes the variation of patterns sensitivity but also reduce nuisance and highlight defective patterns or killer defects. After grouping in either single or multiple layers, systematic defects can be identified quickly in this flow. In this paper, we applied design based pattern monitor in different layers to monitor process variation impacts on all kinds of patterns. First, the contour of high resolutions SEM image is extracted and aligned to design with offset adjustment and fine alignment [1]. Second, specified pattern rules can be applied on design clip area, the same size as SEM image, and form POI (pattern of interest) areas. Third, the discrepancy of contour and design measurement at different pattern types in measurement blocks. Fourth, defective patterns are reported by discrepancy detection criteria and pattern grouping [4]. Meanwhile, reported pattern defects are ranked by number and severity by discrepancy. In this step, process sensitive high repeatable systematic defects can be identified quickly Through this design based process pattern

The Human Factors Engineering in Process Design Modifications CNAT

International Nuclear Information System (INIS)

Foronda Delgado, A.; Almeida Parra, P.; Bote Moreno, J.

2013-01-01

This contribution presents the process followed at the Almaraz and Trillo Nuclear Power Plants in order to integrate Human Factors Engineering (HFE) in the Design Modifications. This includes the applicable rules and regulations, the classification criteria used to categorize the modification, the activities that are to be carried out in each case, as well as recent examples where the full HFE program model was applied at Almaraz (Alternate Shutdown Panel) and Trillo (Primary Bleed and Feed).

Towards the development of mechanistically based design rules for corrosion fatigue in ductile steels

International Nuclear Information System (INIS)

Johnson, R.; McMinn, A.; Tomkins, B.

1980-08-01

Design curves for nuclear pressure vessels and off-shore structures are based on air endurance curves that have had a safety factor applied to account for effects such as corrosive environments, frequency and mean stress. These are supported by a limited number of endurance tests on actual pressure vessels, and on welded joints under service conditions. These data-based rules are limited in their ability to cope with environmental effects and as the time dependencies of fatigue and corrosion processes are so different, no sound basis exists for the extrapolation of data to long component lifetimes. The crack-growth behaviour of materials used in nuclear pressure vessels and off-shore structures is examined with a view to determining how it may be used to re-assess the design curves. Even simple integration of crack-growth laws can be seen to be within reasonable agreement with present design curves; with improved methods of stress analysis, etc. this approach could potentially improve these curves. Mechanistic studies are also seen to offer a means of examining and assessing time-dependent process interactions and so, potentially, to form the basis of new guidelines. Finally the areas where further work would be needed to substantiate any changes in design curves are indicated. (author)

Bringing Agility to Business Process Management: Rules Deployment in an SOA

Science.gov (United States)

El Kharbili, Marwane; Keil, Tobias

Business process management (BPM) has emerged as paradigm for integrating business strategies and enterprise architecture (EA). In this context, BPM implementation on top of web-service-based service oriented architectures is an accepted approach as shown by great amount of literature. One concern in this regard is how-to make BPs reactive to change. Our approach to the problem is the integration of business rule management (BRM) and BPM by allowing modeling of decisions hard-coded in BPs as separate business rules (BRs). These BRs become EA assets and need to be exploited when executing BPs. We motivate why BPM needs agility and discuss what requirements on BPM this poses. This paper presents prototyping work conducted at a BP modeling and analysis vendor which weeks to showcase how using business rule management (BRM) as a mean for modeling decisions can help achieve a much sought-after agility to BPM. This prototype relies on the integrated modeling of business rules (BRs) and BPs, and rule deployment as web services part of an SOA.

Buckling rules in design codes: state of the art and future developments

Energy Technology Data Exchange (ETDEWEB)

Turbat, A. [FRAMATOME ANP, 69 - Lyon (France); Meziere, Y. [Electricite de France (EDF SEPTEN), 69 - Villeurbanne (France)

2001-07-01

Buckling, which can affect structures like bars, beams and shells when they are submitted to compressive stresses, can lead to unacceptable deformations and ruptures. Consequently, main Design Codes, especially those used in nuclear industry, include rules and analysis methods in order to prevent this phenomenon. In this paper, a review of buckling rules and/or analysis methods existing in ASME, RCC-M, RCC-MR and European Recommendations is performed. Then, these rules and methods are applied to the case of a cylinder filled with water and submitted to a seismic loading and results are compared. In the last part, current developments of methods to analyse creep buckling and dynamic buckling which should come and complete RCC-MR soon are presented. (author)

Buckling rules in design codes: state of the art and future developments

International Nuclear Information System (INIS)

Turbat, A.; Meziere, Y.

2001-01-01

Buckling, which can affect structures like bars, beams and shells when they are submitted to compressive stresses, can lead to unacceptable deformations and ruptures. Consequently, main Design Codes, especially those used in nuclear industry, include rules and analysis methods in order to prevent this phenomenon. In this paper, a review of buckling rules and/or analysis methods existing in ASME, RCC-M, RCC-MR and European Recommendations is performed. Then, these rules and methods are applied to the case of a cylinder filled with water and submitted to a seismic loading and results are compared. In the last part, current developments of methods to analyse creep buckling and dynamic buckling which should come and complete RCC-MR soon are presented. (author)

Using business critical design rules to frame new architecture introduction in multi-architecture portfolios

DEFF Research Database (Denmark)

Løkkegaard, Martin; Mortensen, Niels Henrik; Hvam, Lars

2018-01-01

component sharing, or sharing critical design principles. This alignment is not trivial, as extensive design knowledge is needed to overview a portfolio with many, often highly different products and manufacturing lines. In this paper, we suggest establishing a frame of reference for new......When introducing new architectures to an industrial portfolio, counting multiple existing product and manufacturing solutions, time-to-market and investments in manufacturing equipment can be significantly reduced if new concepts are aligned with the existing portfolio. This can be done through......-product introduction based on several ‘game rules’, or Business Critical Design Rules (BCDRs), which denote the most critical features of the product and manufacturing architectures, and should be considered an obligatory reference for design when introducing new architectures. BCDRs are derived from the portfolio...

RCC-M: Design and construction rules for mechanical components of PWR nuclear islands

International Nuclear Information System (INIS)

2017-01-01

AFCEN's RCC-M code concerns the mechanical components designed and manufactured for pressurized water reactors (PWR). It applies to pressure equipment in nuclear islands in safety classes 1, 2 and 3, and certain non-pressure components, such as vessel internals, supporting structures for safety class components, storage tanks and containment penetrations. RCC-M covers the following technical subjects: sizing and design, choice of materials and procurement. Fabrication and control, including: associated qualification requirements (procedures, welders and operators, etc.), control methods to be implemented, acceptance criteria for detected defects, documentation associated with the different activities covered, and quality assurance. The design, manufacture and inspection rules defined in RCC-M leverage the results of the research and development work pioneered in France, Europe and worldwide, and which have been successfully used by industry to design and build PWR nuclear islands. AFCEN's rules incorporate the resulting feedback. Use: France's last 16 nuclear units (P'4 and N4); 4 CP1 reactors in South Africa (2) and Korea (2); 44 M310 (4), CPR-1000 (28), CPR-600 (6), HPR-1000 (4) and EPR (2) reactors in service or undergoing construction in China; 4 EPR reactors in Europe: Finland (1), France (1) and UK (2). Content: Section I - nuclear island components, subsection 'A': general rules, subsection 'B': class 1 components, subsection 'C': class 2 components, subsection 'D': class 3 components, subsection 'E': small components, subsection 'G': core support structures, subsection 'H': supports, subsection 'J': low pressure or atmospheric storage tanks, subsection 'P': containment penetration, subsection 'Q': qualification of active mechanical components, subsection 'Z': technical appendices; section II - materials; section III - examination

Shortcomings of lawmaking process in Romania. Their influence on the rule of law

Directory of Open Access Journals (Sweden)

Verginia Vedinaş

2016-12-01

Full Text Available The study aims to analyze the main shortcomings that are found in lawmaking process in Romania. It will be structured in four sections, in which will be addressed, in succession, the requirements drawn from constitutional regulations in matters of lawmaking process in Romania, then the rules and principles drawn from the legislation of rules regarding the legislative technique. Further, reporting to the ideas expressed in the first two sections, there will be highlighted the worst shortcomings, by the content and consequences, and in the last part of the study will be revealed the negative effects they produce in the rule of law and, implicitly, on businesses environment. Also, there will be outlined several possible solutions and recommendations that should be considered in the future.

Investigating decision rules with a new experimental design: the EXACT paradigm

Science.gov (United States)

Biscione, Valerio; Harris, Christopher M.

2015-01-01

In the decision-making field, it is important to distinguish between the perceptual process (how information is collected) and the decision rule (the strategy governing decision-making). We propose a new paradigm, called EXogenous ACcumulation Task (EXACT) to disentangle these two components. The paradigm consists of showing a horizontal gauge that represents the probability of receiving a reward at time t and increases with time. The participant is asked to press a button when they want to request a reward. Thus, the perceptual mechanism is hard-coded and does not need to be inferred from the data. Based on this paradigm, we compared four decision rules (Bayes Risk, Reward Rate, Reward/Accuracy, and Modified Reward Rate) and found that participants appeared to behave according to the Modified Reward Rate. We propose a new way of analysing the data by using the accuracy of responses, which can only be inferred in classic RT tasks. Our analysis suggests that several experimental findings such as RT distribution and its relationship with experimental conditions, usually deemed to be the result of a rise-to-threshold process, may be simply explained by the effect of the decision rule employed. PMID:26578916

Knowledge Assisted Integrated Design of a Component and Its Manufacturing Process

Science.gov (United States)

Gautham, B. P.; Kulkarni, Nagesh; Khan, Danish; Zagade, Pramod; Reddy, Sreedhar; Uppaluri, Rohith

Integrated design of a product and its manufacturing processes would significantly reduce the total cost of the products as well as the cost of its development. However this would only be possible if we have a platform that allows us to link together simulations tools used for product design, performance evaluation and its manufacturing processes in a closed loop. In addition to that having a comprehensive knowledgebase that provides systematic knowledge guided assistance to product or process designers who may not possess in-depth design knowledge or in-depth knowledge of the simulation tools, would significantly speed up the end-to-end design process. In this paper, we propose a process and illustrate a case for achieving an integrated product and manufacturing process design assisted by knowledge support for the user to make decisions at various stages. We take transmission component design as an example. The example illustrates the design of a gear for its geometry, material selection and its manufacturing processes, particularly, carburizing-quenching and tempering, and feeding the material properties predicted during heat treatment into performance estimation in a closed loop. It also identifies and illustrates various decision stages in the integrated life cycle and discusses the use of knowledge engineering tools such as rule-based guidance, to assist the designer make informed decisions. Simulation tools developed on various commercial, open-source platforms as well as in-house tools along with knowledge engineering tools are linked to build a framework with appropriate navigation through user-friendly interfaces. This is illustrated through examples in this paper.

Rule induction performance in amnestic mild cognitive impairment and Alzheimer's dementia: examining the role of simple and biconditional rule learning processes.

Science.gov (United States)

Oosterman, Joukje M; Heringa, Sophie M; Kessels, Roy P C; Biessels, Geert Jan; Koek, Huiberdina L; Maes, Joseph H R; van den Berg, Esther

2017-04-01

Rule induction tests such as the Wisconsin Card Sorting Test require executive control processes, but also the learning and memorization of simple stimulus-response rules. In this study, we examined the contribution of diminished learning and memorization of simple rules to complex rule induction test performance in patients with amnestic mild cognitive impairment (aMCI) or Alzheimer's dementia (AD). Twenty-six aMCI patients, 39 AD patients, and 32 control participants were included. A task was used in which the memory load and the complexity of the rules were independently manipulated. This task consisted of three conditions: a simple two-rule learning condition (Condition 1), a simple four-rule learning condition (inducing an increase in memory load, Condition 2), and a complex biconditional four-rule learning condition-inducing an increase in complexity and, hence, executive control load (Condition 3). Performance of AD patients declined disproportionately when the number of simple rules that had to be memorized increased (from Condition 1 to 2). An additional increment in complexity (from Condition 2 to 3) did not, however, disproportionately affect performance of the patients. Performance of the aMCI patients did not differ from that of the control participants. In the patient group, correlation analysis showed that memory performance correlated with Condition 1 performance, whereas executive task performance correlated with Condition 2 performance. These results indicate that the reduced learning and memorization of underlying task rules explains a significant part of the diminished complex rule induction performance commonly reported in AD, although results from the correlation analysis suggest involvement of executive control functions as well. Taken together, these findings suggest that care is needed when interpreting rule induction task performance in terms of executive function deficits in these patients.

Rules for design of Alloy 617 nuclear components to very high temperatures

International Nuclear Information System (INIS)

Corum, J.M.; Blass, J.J.

1991-01-01

Very-high-temperature gas-cooled reactors provide attractive options for electric power generation using a direct gas-turbine cycle and for process-heat applications. For the latter, temperatures of at least 950 degree C (1742 degree F) are desirable. As a first step to providing rules for the design of nuclear components operating at very high temperatures, a draft ASME Boiler and Pressure Vessel Code Case has been prepared by an ad hoc Code task force. The Case, which is patterned after the high-temperature nuclear Code Case N-47, covers Ni-Cr-Co-Mo Alloy 617 for temperatures to 982 degree C (1800 degree F). The purpose of this paper is to provide a synopsis of the draft Case and the significant differences between it and Case N-47. Particular emphasis is placed on the material behavior and allowables. The paper also recommends some materials and structures development activities that are needed to place the design methodology on a sound and defensible footing. 4 refs., 9 figs., 1 tab

Using pattern enumeration to accelerate process development and ramp yield

Science.gov (United States)

Zhuang, Linda; Pang, Jenny; Xu, Jessy; Tsai, Mengfeng; Wang, Amy; Zhang, Yifan; Sweis, Jason; Lai, Ya-Chieh; Ding, Hua

2016-03-01

During a new technology node process setup phase, foundries do not initially have enough product chip designs to conduct exhaustive process development. Different operational teams use manually designed simple test keys to set up their process flows and recipes. When the very first version of the design rule manual (DRM) is ready, foundries enter the process development phase where new experiment design data is manually created based on these design rules. However, these IP/test keys contain very uniform or simple design structures. This kind of design normally does not contain critical design structures or process unfriendly design patterns that pass design rule checks but are found to be less manufacturable. It is desired to have a method to generate exhaustive test patterns allowed by design rules at development stage to verify the gap of design rule and process. This paper presents a novel method of how to generate test key patterns which contain known problematic patterns as well as any constructs which designers could possibly draw based on current design rules. The enumerated test key patterns will contain the most critical design structures which are allowed by any particular design rule. A layout profiling method is used to do design chip analysis in order to find potential weak points on new incoming products so fab can take preemptive action to avoid yield loss. It can be achieved by comparing different products and leveraging the knowledge learned from previous manufactured chips to find possible yield detractors.

Rule-based decision making model

International Nuclear Information System (INIS)

Sirola, Miki

1998-01-01

A rule-based decision making model is designed in G2 environment. A theoretical and methodological frame for the model is composed and motivated. The rule-based decision making model is based on object-oriented modelling, knowledge engineering and decision theory. The idea of safety objective tree is utilized. Advanced rule-based methodologies are applied. A general decision making model 'decision element' is constructed. The strategy planning of the decision element is based on e.g. value theory and utility theory. A hypothetical process model is built to give input data for the decision element. The basic principle of the object model in decision making is division in tasks. Probability models are used in characterizing component availabilities. Bayes' theorem is used to recalculate the probability figures when new information is got. The model includes simple learning features to save the solution path. A decision analytic interpretation is given to the decision making process. (author)

SP-100 shield design automation process using expert system and heuristic search techniques

International Nuclear Information System (INIS)

Marcille, T.F.; Protsik, R.; Deane, N.A.; Hoover, D.G.

1993-01-01

The SP-100 shield subsystem design process has been modified to utilize the GE Corporate Reserch and Development program, ENGINEOUS (Tong 1990). ENGINEOUS is a software system that automates the use of Computer Aided Engineering (CAE) analysis programs in the engineering design process. The shield subsystem design process incorporates a nuclear subsystems design and performance code, a two-dimensional neutral particle transport code, several input processors and two general purpose neutronic output processors. Coupling these programs within ENGINEOUS provides automatic transition paths between applications, with no source code modifications. ENGINEOUS captures human design knowledge, as well as information about the specific CAE applications and stores this information in knowledge base files. The knowledge base information is used by the ENGINEOUS expert system to drive knowledge directed and knowledge supplemented search modules to find an optimum shield design for a given reactor definition, ensuring that specified constraints are satisfied. Alternate designs, not accommodated in the optimization design rules, can readily be explored through the use of a parametric study capability

Simplified design rule for ratcheting analysis

International Nuclear Information System (INIS)

Cousseran, P.; Clement, G.; Lebey, J.; Roche, R.L.

1982-07-01

Ratcheting in the creep range is the magnification of primary stress effects caused by cyclic straining. Computation results do not agree with experimental results due to the complexity of the real material behavior. From the results of experimental tests a design rule based on the concept of effective primary stress Psub(eff) is proposed. The effective primary stress is a fictitious primary stress giving the same effect that the real loading i.e. the same effect that the combination of an applied primary stress P and a cyclic straining quoted by the range Qsub(R) of secondary stress variation. Determination of an upper bound value of Psub(eff) is made with the help of an efficiency diagram. More precisely the efficiency diagram include a curve giving a conservative value of an efficiency index V = P/Psub(eff) as a function of the secondarity quotient SQ = Qsub(R)/P. Finally limitation of Psub(eff) intensity is discussed in regard with the current practice

78 FR 23827 - Designation of Eighteen Individuals Pursuant to the Sergei Magnitsky Rule of Law Accountability...

Science.gov (United States)

2013-04-22

... DEPARTMENT OF THE TREASURY Office of Foreign Assets Control Designation of Eighteen Individuals Pursuant to the Sergei Magnitsky Rule of Law Accountability Act of 2012 AGENCY: Office of Foreign Assets... blocked pursuant to the Sergei Magnitsky Rule of Law Accountability Act of 2012 (Pub. L. 112-208, December...

A formalized design process for bacterial consortia that perform logic computing.

Directory of Open Access Journals (Sweden)

Weiyue Ji

Full Text Available The concept of microbial consortia is of great attractiveness in synthetic biology. Despite of all its benefits, however, there are still problems remaining for large-scaled multicellular gene circuits, for example, how to reliably design and distribute the circuits in microbial consortia with limited number of well-behaved genetic modules and wiring quorum-sensing molecules. To manage such problem, here we propose a formalized design process: (i determine the basic logic units (AND, OR and NOT gates based on mathematical and biological considerations; (ii establish rules to search and distribute simplest logic design; (iii assemble assigned basic logic units in each logic operating cell; and (iv fine-tune the circuiting interface between logic operators. We in silico analyzed gene circuits with inputs ranging from two to four, comparing our method with the pre-existing ones. Results showed that this formalized design process is more feasible concerning numbers of cells required. Furthermore, as a proof of principle, an Escherichia coli consortium that performs XOR function, a typical complex computing operation, was designed. The construction and characterization of logic operators is independent of "wiring" and provides predictive information for fine-tuning. This formalized design process provides guidance for the design of microbial consortia that perform distributed biological computation.

Synthesizing Service Composition Models on the Basis of Temporal Business Rules

Institute of Scientific and Technical Information of China (English)

Jian Yu; Yan-Bo Han; Jun Han; Yan Jin; Paolo Falcarin; Maurizio Morisio

2008-01-01

Transformational approaches to generating design and implementation models from requirements can bring effectiveness and quality to software development. In this paper we present a framework and associated techniques to generate the process model of a service composition from a set of temporal business rules. Dedicated techniques including pathfinding, branching structure identification and parallel structure identification are used for semi-automatically synthesizing the process model from the semantics-equivalent Finite State Automata of the rules. These process models naturally satisfy the prescribed behavioral constraints of the rules. With the domain knowledge encoded in the temporal business rules,an executable service composition program, e.g., a BPEL program, can be further generated from the process models. A running example in the e-business domain is used for illustrating our approach throughout this paper.

Design Processes

DEFF Research Database (Denmark)

Ovesen, Nis

2009-01-01

Inspiration for most research and optimisations on design processes still seem to focus within the narrow field of the traditional design practise. The focus in this study turns to associated businesses of the design professions in order to learn from their development processes. Through interviews...... and emerging production methods....

Creep-fatigue damage rules for advanced fast reactor design. Proceedings of a technical committee meeting

International Nuclear Information System (INIS)

1997-03-01

The IAEA, following the recommendations of the International Working Group on Fast Reactors, convened a Technical Committee Meeting on Creep-Fatigue Damage Rules to be used in Fast Reactor Design. The objective of the meeting was to review developments in design rules for creep-fatigue conditions and to identify any areas in which further work would be desirable. The meeting was hosted by AEA Technology, Risley, and held in Manchester, United Kingdom, 11-13 June 1996. It was attended by experts from the European Commission, France, India, Japan, the Republic of Korea, the Russian Federation and the United Kingdom. Refs, figs, tabs

A Rule Based Approach to ISS Interior Volume Control and Layout

Science.gov (United States)

Peacock, Brian; Maida, Jim; Fitts, David; Dory, Jonathan

2001-01-01

Traditional human factors design involves the development of human factors requirements based on a desire to accommodate a certain percentage of the intended user population. As the product is developed human factors evaluation involves comparison between the resulting design and the specifications. Sometimes performance metrics are involved that allow leniency in the design requirements given that the human performance result is satisfactory. Clearly such approaches may work but they give rise to uncertainty and negotiation. An alternative approach is to adopt human factors design rules that articulate a range of each design continuum over which there are varying outcome expectations and interactions with other variables, including time. These rules are based on a consensus of human factors specialists, designers, managers and customers. The International Space Station faces exactly this challenge in interior volume control, which is based on anthropometric, performance and subjective preference criteria. This paper describes the traditional approach and then proposes a rule-based alternative. The proposed rules involve spatial, temporal and importance dimensions. If successful this rule-based concept could be applied to many traditional human factors design variables and could lead to a more effective and efficient contribution of human factors input to the design process.

Exact substitute processes for diffusion-reaction systems with local complete exclusion rules

International Nuclear Information System (INIS)

Schulz, Michael; Reineker, Peter

2005-01-01

Lattice systems with one species diffusion-reaction processes under local complete exclusion rules are studied analytically starting from the usual master equations with discrete variables and their corresponding representation in a Fock space. On this basis, a formulation of the transition probability as a Grassmann path integral is derived in a straightforward manner. It will be demonstrated that this Grassmann path integral is equivalent to a set of Ito stochastic differential equations. Averages of arbitrary variables and correlation functions of the underlying diffusion-reaction system can be expressed as weighted averages over all solutions of the system of stochastic differential equations. Furthermore, these differential equations are equivalent to a Fokker-Planck equation describing the probability distribution of the actual Ito solutions. This probability distribution depends on continuous variables in contrast to the original master equation, and their stochastic dynamics may be interpreted as a substitute process which is completely equivalent to the original lattice dynamics. Especially, averages and correlation functions of the continuous variables are connected to the corresponding lattice quantities by simple relations. Although the substitute process for diffusion-reaction systems with exclusion rules has some similarities to the well-known substitute process for the same system without exclusion rules, there exists a set of remarkable differences. The given approach is not only valid for the discussed single-species processes. We give sufficient arguments to show that arbitrary combinations of unimolecular and bimolecular lattice reactions under complete local exclusions may be described in terms of our approach

The MSFC Collaborative Engineering Process for Preliminary Design and Concept Definition Studies

Science.gov (United States)

Mulqueen, Jack; Jones, David; Hopkins, Randy

2011-01-01

This paper describes a collaborative engineering process developed by the Marshall Space Flight Center's Advanced Concepts Office for performing rapid preliminary design and mission concept definition studies for potential future NASA missions. The process has been developed and demonstrated for a broad range of mission studies including human space exploration missions, space transportation system studies and in-space science missions. The paper will describe the design team structure and specialized analytical tools that have been developed to enable a unique rapid design process. The collaborative engineering process consists of integrated analysis approach for mission definition, vehicle definition and system engineering. The relevance of the collaborative process elements to the standard NASA NPR 7120.1 system engineering process will be demonstrated. The study definition process flow for each study discipline will be will be outlined beginning with the study planning process, followed by definition of ground rules and assumptions, definition of study trades, mission analysis and subsystem analyses leading to a standardized set of mission concept study products. The flexibility of the collaborative engineering design process to accommodate a wide range of study objectives from technology definition and requirements definition to preliminary design studies will be addressed. The paper will also describe the applicability of the collaborative engineering process to include an integrated systems analysis approach for evaluating the functional requirements of evolving system technologies and capabilities needed to meet the needs of future NASA programs.

Mechanisms of rule acquisition and rule following in inductive reasoning.

Science.gov (United States)

Crescentini, Cristiano; Seyed-Allaei, Shima; De Pisapia, Nicola; Jovicich, Jorge; Amati, Daniele; Shallice, Tim

2011-05-25

Despite the recent interest in the neuroanatomy of inductive reasoning processes, the regional specificity within prefrontal cortex (PFC) for the different mechanisms involved in induction tasks remains to be determined. In this study, we used fMRI to investigate the contribution of PFC regions to rule acquisition (rule search and rule discovery) and rule following. Twenty-six healthy young adult participants were presented with a series of images of cards, each consisting of a set of circles numbered in sequence with one colored blue. Participants had to predict the position of the blue circle on the next card. The rules that had to be acquired pertained to the relationship among succeeding stimuli. Responses given by subjects were categorized in a series of phases either tapping rule acquisition (responses given up to and including rule discovery) or rule following (correct responses after rule acquisition). Mid-dorsolateral PFC (mid-DLPFC) was active during rule search and remained active until successful rule acquisition. By contrast, rule following was associated with activation in temporal, motor, and medial/anterior prefrontal cortex. Moreover, frontopolar cortex (FPC) was active throughout the rule acquisition and rule following phases before a rule became familiar. We attributed activation in mid-DLPFC to hypothesis generation and in FPC to integration of multiple separate inferences. The present study provides evidence that brain activation during inductive reasoning involves a complex network of frontal processes and that different subregions respond during rule acquisition and rule following phases.

Design rules for high temperature plant - the implications of recent research in relation to current practice

International Nuclear Information System (INIS)

Townley, C.H.A.

1977-01-01

An historical summary is presented of design rules for high temperature plant, leading to the rules applicable to high temperature reactors, particularly the liquid metal fast breeder reactor. Special attention is given to creep rupture properties of ferritic and austenitic materials used for the construction of components such as boilers and pressure vessels. (author)

Licensing process for future applications of advanced-design nuclear reactors

International Nuclear Information System (INIS)

Miller, C.L.

1990-01-01

The existing 10CFR50 two-step licensing process in the Code of Federal Regulations can continue to be a viable licensing vehicle for future applications, at least for the near future. The US Nuclear Regulatory Commission (NRC) Commissioners and staff, the public, and the utilities (along with supporting architect/engineers and nuclear steam supply system vendors) have a vast body of experience and knowledge of the existing part 50 licensing process. All these participants are familiar with their respective roles in this process, and history shows this process to be a workable licensing vehicle. Nevertheless, the use of 10CFR52 should be encouraged for future applications. This proposed new rule is intended to achieve the early resolution of licensing issues, to reduce the complexity and uncertainty of the licensing process, and enhance the safety and reliability of nuclear power plants. Part 52's overall purpose is to improve reactor safety and streamline the licensing process by encouraging the use of standard reactor designs and by allowing the early resolution of site environmental and reactor safety issues. The public should be afforded an earlier entry into the licensing process as a result of design certification rulemaking process and combined construction permit/operating license hearings

Design and Analysis of Decision Rules via Dynamic Programming

KAUST Repository

Amin, Talha M.

2017-01-01

Another area of advancement is the presentation of algorithms for constructing Pareto optimal points for rules and rule systems. This allows us to study the existence of “totally optimal” decision rules

RCC-CW - Rules for design and construction of PWR nuclear civil works

International Nuclear Information System (INIS)

2016-01-01

RCC-CW describes the rules for designing, building and testing civil engineering works in PWR reactors. It explains the principles and requirements for the safety, serviceability and durability of concrete and metal frame structures, based on Eurocode design principles (European standards for the structural design of construction works) combined with specific measures for safety-class buildings. The code is produced as part of the RCC-CW Subcommittee, which includes all the parties involved in civil engineering works in the nuclear sector: clients, contractors, general and specialized firms, consultancies and inspection offices. The code covers the following areas relating to the design and construction of civil engineering works that play an important safety role: geotechnical aspects, reinforced concrete structures and galleries, pre-stressed containments with metal liner, metal containment and pool liners, metal frames, anchors, concrete cylinder pipes, containment leak tests. The RCC-CW code is available as an ETC-C version specific to EPR projects (European pressurized reactor). Contents of the 2016 edition of the RCC-CW Code: Part G - General: scope, standards, notations, quality management, general principles; Part D - Design: actions and combinations of actions, geotechnical aspects, pre-stressed or reinforced concrete structures, metal containment liners, metal pool liners, metal frames, anchors; Part C - Construction: geotechnical aspects, concrete, surface finish and formwork, reinforcement for reinforced concrete, pre-stressing processes, prefabricated concrete elements, metal containment liners, metal pool liners, metal frames, anchors, embedded pipelines, joint sealing, survey networks and tolerances; Part M - Maintenance and monitoring: containment integrity and rate tests

ECO DESIGN IN DESIGN PROCESS

Directory of Open Access Journals (Sweden)

PRALEA Jeni

2014-05-01

Full Text Available Eco-design is a new domain, required by the new trends and existing concerns worldwide, generated by the necessity of adopting new design principles. New design principles require the designer to provide a friendly relationship between concept created, environment and consume. This "friendly" relationship should be valid both at present and in the future, generating new opportunities for product, product components or materials from which it was made. Awareness, by the designer, the importance of this new trend, permits the establishment of concepts that have as their objective the protection of present values and ensuring the legacy of future generations. Ecodesig, by its principles, is involved in the design process, from early stage, the stage of product design. Priority objective of the designers will consist in reducing the negative effects on the environment through the entire life cycle and after it is taken out of use. The main aspects of the eco-design will consider extending product exploitation, make better use of materials, reduction of emission of waste. The design process in the "eco"domein must be started by selecting the function of the concept, materials and technological processes, causing the shape of macro and micro geometric of the product through an analysis that involves optimizing and streamlining the product. This paper presents the design process of a cross-sports footwear concept, built on the basis of the principles of ecodesign

A new intuitionistic fuzzy rule-based decision-making system for an operating system process scheduler.

Science.gov (United States)

Butt, Muhammad Arif; Akram, Muhammad

2016-01-01

We present a new intuitionistic fuzzy rule-based decision-making system based on intuitionistic fuzzy sets for a process scheduler of a batch operating system. Our proposed intuitionistic fuzzy scheduling algorithm, inputs the nice value and burst time of all available processes in the ready queue, intuitionistically fuzzify the input values, triggers appropriate rules of our intuitionistic fuzzy inference engine and finally calculates the dynamic priority (dp) of all the processes in the ready queue. Once the dp of every process is calculated the ready queue is sorted in decreasing order of dp of every process. The process with maximum dp value is sent to the central processing unit for execution. Finally, we show complete working of our algorithm on two different data sets and give comparisons with some standard non-preemptive process schedulers.

Process identification through modular neural networks and rule extraction (extended abstract)

NARCIS (Netherlands)

van der Zwaag, B.J.; Slump, Cornelis H.; Spaanenburg, L.; Blockeel, Hendrik; Denecker, Marc

2002-01-01

Monolithic neural networks may be trained from measured data to establish knowledge about the process. Unfortunately, this knowledge is not guaranteed to be found and – if at all – hard to extract. Modular neural networks are better suited for this purpose. Domain-ordered by topology, rule

Rule - Governed Behavior as a Psychological Process

Science.gov (United States)

Segal, Erwin M.; Stacy, E. Webb, Jr.

1975-01-01

Some descriptive criteria for identifying rule-governed behavior are identified from the perspective of cognitive psychology. It is suggested that the concept of explanation in psychology be modified from a specification in terms of physical properties of the antecedent events in a causal sequence to a mapping of rules onto behavior or behavior…

Adaptive clinical trial designs with pre-specified rules for modifying the sample size: understanding efficient types of adaptation.

Science.gov (United States)

Levin, Gregory P; Emerson, Sarah C; Emerson, Scott S

2013-04-15

Adaptive clinical trial design has been proposed as a promising new approach that may improve the drug discovery process. Proponents of adaptive sample size re-estimation promote its ability to avoid 'up-front' commitment of resources, better address the complicated decisions faced by data monitoring committees, and minimize accrual to studies having delayed ascertainment of outcomes. We investigate aspects of adaptation rules, such as timing of the adaptation analysis and magnitude of sample size adjustment, that lead to greater or lesser statistical efficiency. Owing in part to the recent Food and Drug Administration guidance that promotes the use of pre-specified sampling plans, we evaluate alternative approaches in the context of well-defined, pre-specified adaptation. We quantify the relative costs and benefits of fixed sample, group sequential, and pre-specified adaptive designs with respect to standard operating characteristics such as type I error, maximal sample size, power, and expected sample size under a range of alternatives. Our results build on others' prior research by demonstrating in realistic settings that simple and easily implemented pre-specified adaptive designs provide only very small efficiency gains over group sequential designs with the same number of analyses. In addition, we describe optimal rules for modifying the sample size, providing efficient adaptation boundaries on a variety of scales for the interim test statistic for adaptation analyses occurring at several different stages of the trial. We thus provide insight into what are good and bad choices of adaptive sampling plans when the added flexibility of adaptive designs is desired. Copyright © 2012 John Wiley & Sons, Ltd.

Designing Fuzzy Rule Based Expert System for Cyber Security

OpenAIRE

Goztepe, Kerim

2016-01-01

The state of cyber security has begun to attract more attention and interest outside the community of computer security experts. Cyber security is not a single problem, but rather a group of highly different problems involving different sets of threats. Fuzzy Rule based system for cyber security is a system consists of a rule depository and a mechanism for accessing and running the rules. The depository is usually constructed with a collection of related rule sets. The aim of this study is to...

Methodological approaches based on business rules

OpenAIRE

Anca Ioana ANDREESCU; Adina UTA

2008-01-01

Business rules and business processes are essential artifacts in defining the requirements of a software system. Business processes capture business behavior, while rules connect processes and thus control processes and business behavior. Traditionally, rules are scattered inside application code. This approach makes it very difficult to change rules and shorten the life cycle of the software system. Because rules change more quickly than the application itself, it is desirable to externalize...

Downdraught assessment during design : experimental and numerical evaluation of a rule of thumb

NARCIS (Netherlands)

Schellen, L.; Timmers, S.; Loomans, M.G.L.C.; Nelissen, E.S.M.; Hensen, J.L.M.; Marken Lichtenbelt, van W.D.

2012-01-01

Large glass façades are popular architectural features in building design nowadays. However, these façades can result in interior downdraught during periods with low outdoor temperatures. A rule of thumb exists to assess the downdraught risk, based on window height and window temperature [1]. In

The semi-Markov process. Generalizations and calculation rules for application in the analysis of systems

International Nuclear Information System (INIS)

Hirschmann, H.

1983-06-01

The consequences of the basic assumptions of the semi-Markov process as defined from a homogeneous renewal process with a stationary Markov condition are reviewed. The notion of the semi-Markov process is generalized by its redefinition from a nonstationary Markov renewal process. For both the nongeneralized and the generalized case a representation of the first order conditional state probabilities is derived in terms of the transition probabilities of the Markov renewal process. Some useful calculation rules (regeneration rules) are derived for the conditional state probabilities of the semi-Markov process. Compared to the semi-Markov process in its usual definition the generalized process allows the analysis of a larger class of systems. For instance systems with arbitrarily distributed lifetimes of their components can be described. There is also a chance to describe systems which are modified during time by forces or manipulations from outside. (Auth.)

Experimental design rules for implementing biconically tapered single mode optical fibre displacement sensors

Science.gov (United States)

Arregui, Francisco J.; Matias, Ignacio R.; Bariain, Candido; Lopez-Amo, Manuel

1998-06-01

Tapered optical fibers are used to design couplers, wavelength division multiplexers, near field scanning optical microscopy, just to mention a few. Moreover, and due to its strong transmission dependence to external medium the tapered fiber may also be used to sense distinct parameters such as temperature, humidity, PH, etc. In this work bending effects in tapers are exploited to achieved displacement sensors and to present design rules for implementing these sensors according to the desired both range and sensitivity.

Methodological approaches based on business rules

Directory of Open Access Journals (Sweden)

Anca Ioana ANDREESCU

2008-01-01

Full Text Available Business rules and business processes are essential artifacts in defining the requirements of a software system. Business processes capture business behavior, while rules connect processes and thus control processes and business behavior. Traditionally, rules are scattered inside application code. This approach makes it very difficult to change rules and shorten the life cycle of the software system. Because rules change more quickly than the application itself, it is desirable to externalize the rules and move them outside the application. This paper analyzes and evaluates three well-known business rules approaches. It also outlines some critical factors that have to be taken into account in the decision to introduce business rules facilities in a software system. Based on the concept of explicit manipulation of business rules in a software system, the need for a general approach based on business rules is discussed.

In-camera automation of photographic composition rules.

Science.gov (United States)

Banerjee, Serene; Evans, Brian L

2007-07-01

At the time of image acquisition, professional photographers apply many rules of thumb to improve the composition of their photographs. This paper develops a joint optical-digital processing framework for automating composition rules during image acquisition for photographs with one main subject. Within the framework, we automate three photographic composition rules: repositioning the main subject, making the main subject more prominent, and making objects that merge with the main subject less prominent. The idea is to provide to the user alternate pictures obtained by applying photographic composition rules in addition to the original picture taken by the user. The proposed algorithms do not depend on prior knowledge of the indoor/outdoor setting or scene content. The proposed algorithms are also designed to be amenable to software implementation on fixed-point programmable digital signal processors available in digital still cameras.

Decision mining revisited - Discovering overlapping rules

NARCIS (Netherlands)

Mannhardt, Felix; De Leoni, Massimiliano; Reijers, Hajo A.; Van Der Aalst, Wil M P

2016-01-01

Decision mining enriches process models with rules underlying decisions in processes using historical process execution data. Choices between multiple activities are specified through rules defined over process data. Existing decision mining methods focus on discovering mutually-exclusive rules,

Decision Mining Revisited - Discovering Overlapping Rules

NARCIS (Netherlands)

Mannhardt, F.; De Leoni, M.; Reijers, H.A.; van der Aalst, W.M.P.; Nurcan, S.; Soffer, P.; Bajec, M.; Eder, J.

2016-01-01

Decision mining enriches process models with rules underlying decisions in processes using historical process execution data. Choices between multiple activities are specified through rules defined over process data. Existing decision mining methods focus on discovering mutually-exclusive rules,

Ratchetting in PWR: on use of numerical simulations to reduce the conservatism of design rules

International Nuclear Information System (INIS)

Geyer, P.; Meziere, Y.; Taheri, S.

1996-01-01

The French design Code (RCC-M Code) for pressurised water nuclear power plants includes criteria with regard to the risk of progressive deformation. With the new operating conditions, some components no longer check this criteria. Therefore, R and D actions were initiated in 1991 by EDF, CEA and FRAMATOME with the aim of putting forward more suitable design criteria that the present rules, which seem to be too conservative. In the two first parts, this paper presents the RCC-M design rules with regard to the risk progressive deformation, the components that don't check the criteria, and the alternative solutions proposed by FRAMATOME. In the two last parts, we focus on one R and D study to show the theoretical and experimental ways used to solve the problem. Numerical simulations become necessary to model experimental results. But constitutive equations for cyclic plasticity derived from Chaboche model appear inadequate to get accurate predictions. (authors)

Impact of constraints and rules of user-involvement methods for IS concept creation and specification

DEFF Research Database (Denmark)

Jensen, Mika Yasuoka; Ohno, Takehiko; Nakatani, Momoko

2015-01-01

ideas. In this paper, by exemplifying our user-involvement method with game elements, ICT Service Design Game, in comparison with conventional brainstorming, we show the impact of constraints and rules in user-involvement methods when creating service concepts and specifications for information systems....... The analysis is based on a comparative experiment on two design methods and shows that the constraints and rules of our game approach fostered innovative idea generation in spite of participants’ limited knowledge of and experience with design processes. Although our analysis is still in a preliminary stage......, it indicates some positive impact of constraints and rules in design methods, especially when the methods are used by non-design professionals....

Introduction and user's information for the fixed site physical protection upgrade rule guidance compendium

International Nuclear Information System (INIS)

Evans, L.J. Jr.; Allen, T.

1980-06-01

Licensees at fixed sites who possess, use, process, or handle strategic special nuclear material are required to design a physical security system to protect this material. This report suggests an orderly process for using guidance, with special emphasis on two regulatory guides and two NUREG series documents that comprise a compendium, to aid in the design of a physical security system that meets the requirements of the final Physical Protection Upgrade Rule. The rule was published November 28, 1979 (44 FR 68184), and became effective March 25, 1980

Methodology for balancing design and process tradeoffs for deep-subwavelength technologies

Science.gov (United States)

Graur, Ioana; Wagner, Tina; Ryan, Deborah; Chidambarrao, Dureseti; Kumaraswamy, Anand; Bickford, Jeanne; Styduhar, Mark; Wang, Lee

2011-04-01

For process development of deep-subwavelength technologies, it has become accepted practice to use model-based simulation to predict systematic and parametric failures. Increasingly, these techniques are being used by designers to ensure layout manufacturability, as an alternative to, or complement to, restrictive design rules. The benefit of model-based simulation tools in the design environment is that manufacturability problems are addressed in a design-aware way by making appropriate trade-offs, e.g., between overall chip density and manufacturing cost and yield. The paper shows how library elements and the full ASIC design flow benefit from eliminating hot spots and improving design robustness early in the design cycle. It demonstrates a path to yield optimization and first time right designs implemented in leading edge technologies. The approach described herein identifies those areas in the design that could benefit from being fixed early, leading to design updates and avoiding later design churn by careful selection of design sensitivities. This paper shows how to achieve this goal by using simulation tools incorporating various models from sparse to rigorously physical, pattern detection and pattern matching, checking and validating failure thresholds.

Model-Based Integrated Process Design and Controller Design of Chemical Processes

DEFF Research Database (Denmark)

Abd Hamid, Mohd Kamaruddin Bin

that is typically formulated as a mathematical programming (optimization with constraints) problem is solved by the so-called reverse approach by decomposing it into four sequential hierarchical sub-problems: (i) pre-analysis, (ii) design analysis, (iii) controller design analysis, and (iv) final selection......This thesis describes the development and application of a new systematic modelbased methodology for performing integrated process design and controller design (IPDC) of chemical processes. The new methodology is simple to apply, easy to visualize and efficient to solve. Here, the IPDC problem...... are ordered according to the defined performance criteria (objective function). The final selected design is then verified through rigorous simulation. In the pre-analysis sub-problem, the concepts of attainable region and driving force are used to locate the optimal process-controller design solution...

RuleMaDrone: A Web-Interface to Visualise Space Usage Rules for Drones

OpenAIRE

Trippaers, Aäron

2015-01-01

RuleMaDrone, an application developed within this thesis, is presented as a solution to communicate the rules and regulations to drone operators. To provide the solution a framework for drone safety was designed which consists of the rules and regulations, the drone properties and the environmental factors. RuleMaDrone is developed with this framework and thus will provide drone operators with an application which they can use to find a safe and legal fly zone. RuleMaDrone u...

Convention on nuclear safety. Rules of procedure and financial rules

International Nuclear Information System (INIS)

1998-01-01

The document presents the Rules of Procedure and Financial Rules that apply mutatis mutandis to any meeting of the Contracting Parties to the Convention on Nuclear Safety (INFCIRC/449) convened in accordance with Chapter 3 of the Convention. It includes four parts: General provisions, Preparatory process for review meetings, Review meetings, and Amendment and interpretation of rules

Learning the Rules of the Game

Science.gov (United States)

Smith, Donald A.

2018-03-01

Games have often been used in the classroom to teach physics ideas and concepts, but there has been less published on games that can be used to teach scientific thinking. D. Maloney and M. Masters describe an activity in which students attempt to infer rules to a game from a history of moves, but the students don't actually play the game. Giving the list of moves allows the instructor to emphasize the important fact that nature usually gives us incomplete data sets, but it does make the activity less immersive. E. Kimmel suggested letting students attempt to figure out the rules to Reversi by playing it, but this game only has two players, which makes it difficult to apply in a classroom setting. Kimmel himself admits the choice of Reversi is somewhat arbitrary. There are games, however, that are designed to make the process of figuring out the rules an integral aspect of play. These games involve more people and require only a deck or two of cards. I present here an activity constructed around the card game Mao, which can be used to help students recognize aspects of scientific thinking. The game is particularly good at illustrating the importance of falsification tests (questions designed to elicit a negative answer) over verification tests (examples that confirm what is already suspected) for illuminating the underlying rules.

Creep design rules in french ''RCC-MR'' code

International Nuclear Information System (INIS)

Roche, H.

1986-04-01

In this paper, four points enlightening the originality of the ''RCC-MR'' analysis rules in the creep range will be discussed. The three first points will concern elastic analysis, the fourth one materials data. The rules given in this paper are applicable for class 1 components and level A conditions. They are given by way of illustration in a simplified form

The Influence of Game Design on the Collaborative Problem Solving Process: A Cross-Case Study of Multi-Player Collaborative Gameplay Analysis

Science.gov (United States)

Yildirim, Nilay

2013-01-01

This cross-case study examines the relationships between game design attributes and collaborative problem solving process in the context of multi-player video games. The following game design attributes: sensory stimuli elements, level of challenge, and presentation of game goals and rules were examined to determine their influence on game…

Design and application of process control charting methodologies to gamma irradiation practices

Science.gov (United States)

Saylor, M. C.; Connaghan, J. P.; Yeadon, S. C.; Herring, C. M.; Jordan, T. M.

2002-12-01

The relationship between the contract irradiation facility and the customer has historically been based upon a "PASS/FAIL" approach with little or no quality metrics used to gage the control of the irradiation process. Application of process control charts, designed in coordination with mathematical simulation of routine radiation processing, can provide a basis for understanding irradiation events. By using tools that simulate the physical rules associated with the irradiation process, end-users can explore process-related boundaries and the effects of process changes. Consequently, the relationship between contractor and customer can evolve based on the derived knowledge. The resulting level of mutual understanding of the irradiation process and its resultant control benefits both the customer and contract operation, and provides necessary assurances to regulators. In this article we examine the complementary nature of theoretical (point kernel) and experimental (dosimetric) process evaluation, and the resulting by-product of improved understanding, communication and control generated through the implementation of effective process control charting strategies.

Service without a Smile: Comparing the Consequences of Neutral and Positive Display Rules

Science.gov (United States)

Trougakos, John P.; Jackson, Christine L.; Beal, Daniel J.

2011-01-01

We used an experimental design to examine the intrapersonal and interpersonal processes through which neutral display rules, compared to positive display rules, influence objective task performance of poll workers and ratings provided by survey respondents of the poll workers. Student participants (N = 140) were trained to adhere to 1 of the 2…

Decision Mining Revisited – Discovering Overlapping Rules

NARCIS (Netherlands)

Mannhardt, F.; de Leoni, M.; Reijers, H.A.; van der Aalst, W.M.P.

2016-01-01

Decision mining enriches process models with rules underlying decisions in processes using historical process execution data. Choices between multiple activities are specified through rules defined over process data. Existing decision mining methods focus on discovering mutually-exclusive rules,

Looking for exceptions on knowledge rules induced from HIV cleavage data set

Directory of Open Access Journals (Sweden)

Ronaldo Cristiano Prati

2004-01-01

Full Text Available The aim of data mining is to find useful knowledge inout of databases. In order to extract such knowledge, several methods can be used, among them machine learning (ML algorithms. In this work we focus on ML algorithms that express the extracted knowledge in a symbolic form, such as rules. This representation may allow us to ''explain'' the data. Rule learning algorithms are mainly designed to induce classification rules that can predict new cases with high accuracy. However, these sorts of rules generally express common sense knowledge, resulting in many interesting and useful rules not being discovered. Furthermore, the domain independent biases, especially those related to the language used to express the induced knowledge, could induce rules that are difficult to understand. Exceptions might be used in order to overcome these drawbacks. Exceptions are defined as rules that contradict common believebeliefs. This kind of rules can play an important role in the process of understanding the underlying data as well as in making critical decisions. By contradicting the user's common beliefves, exceptions are bound to be interesting. This work proposes a method to find exceptions. In order to illustrate the potential of our approach, we apply the method in a real world data set to discover rules and exceptions in the HIV virus protein cleavage process. A good understanding of the process that generates this data plays an important role oin the research of cleavage inhibitors. We consider believe that the proposed approach may help the domain expert to further understand this process.

Design consideration on hydrogen production demonstration plant of thermochemical IS process

International Nuclear Information System (INIS)

Iwatsuki, Jin; Noguchi, Hiroki; Terada, Atsuhiko; Kubo, Shinji; Sakaba, Nariaki; Onuki, Kaoru; Hino, Ryutaro

2009-03-01

Preliminary design study was carried out on the hydrogen production demonstration plant of thermochemical IS process. In the pilot test, hydrogen production will be examined under prototypical condition using an apparatus made of industrial materials, which is driven by the sensible heat of helium gas heated by an electric heater that simulates the High Temperature Engineering Test Reactor (HTTR). Tentative system condition was defined considering the HTTR specification and the experience on the construction and the operation of the mock-up test facility using methane reforming for hydrogen production. The process condition and the system flow diagram were discussed to meet the system condition. Based on the defined process condition, types of the main components were discussed taking the corrosion resistance of the structural materials into consideration. Applicable rules and regulations were also surveyed regarding the plant construction and operation. (author)

Designing for elevated temperature

International Nuclear Information System (INIS)

Boer, G.A. de

1982-01-01

The reasons for the application of higher process temperatures are explained. The properties of stainless steel are compared with those of other materials such as molybdenum. Factors influencing the choice of the material such as availability of material data at high temperature, controllability, and strength of heat-affected zone are discussed. The process of designing a structure for safe and economic high-temperature application is outlined: design-by-analysis in contrast to the design-by-rule which is general practice for low-temperature applications. The rules laid down in the ASME Pressure Vessel Code Case N47 are explained as well as the procedure for inelastic stress calculations. (author)

Design and Construction Rules for Mechanical equipments of FBR nuclear islands: RCC-MR. Tome 1, Volume Z: Other technical appendixes

International Nuclear Information System (INIS)

1985-06-01

This book is the 7th of a whole set of 12 which constitute the present edition of the RCC-MR. The technical appendixes of this volume deal with the following characteristics and rules: calculation of screwed assemblies, analysis taking into account creep, welded joint characteristics, elastoplastic analysis of a structure under cyclic loads, elasto-visco-plastic analysis under cyclic loads, calculation rules of revolution shells under external presure and of cylinders under axial compression, design rules of linear supports, calculation rules of convex bottoms under internal pressure [fr

Biology Teachers Designing Context-Based Lessons for Their Classroom Practice--The Importance of Rules-of-Thumb

Science.gov (United States)

Wieringa, Nienke; Janssen, Fred J. J. M.; Van Driel, Jan H.

2011-01-01

In science education in the Netherlands new, context-based, curricula are being developed. As in any innovation, the outcome will largely depend on the teachers who design and implement lessons. Central to the study presented here is the idea that teachers, when designing lessons, use rules-of-thumb: notions of what a lesson should look like if…

Expression regulation of design process gene in product design

DEFF Research Database (Denmark)

Li, Bo; Fang, Lusheng; Li, Bo

2011-01-01

To improve the design process efficiency, this paper proposes the principle and methodology that design process gene controls the characteristics of design process under the framework of design process reuse and optimization based on design process gene. First, the concept of design process gene...... is proposed and analyzed, as well as its three categories i.e., the operator gene, the structural gene and the regulator gene. Second, the trigger mechanism that design objectives and constraints trigger the operator gene is constructed. Third, the expression principle of structural gene is analyzed...... with the example of design management gene. Last, the regulation mode that the regulator gene regulates the expression of the structural gene is established and it is illustrated by taking the design process management gene as an example. © (2011) Trans Tech Publications....

Medical Examination of Aliens--Revisions to Medical Screening Process. Final rule.

Science.gov (United States)

2016-01-26

The Centers for Disease Control and Prevention (CDC), within the Department of Health and Human Services (HHS), is issuing this final rule (FR) to amend its regulations governing medical examinations that aliens must undergo before they may be admitted to the United States. Based on public comment received, HHS/CDC did not make changes from the NPRM published on June 23, 2015. Accordingly, this FR will: Revise the definition of communicable disease of public health significance by removing chancroid, granuloma inguinale, and lymphogranuloma venereum as inadmissible health-related conditions for aliens seeking admission to the United States; update the notification of the health-related grounds of inadmissibility to include proof of vaccinations to align with existing requirements established by the Immigration and Nationality Act (INA); revise the definitions and evaluation criteria for mental disorders, drug abuse and drug addiction; clarify and revise the evaluation requirements for tuberculosis; clarify and revise the process for the HHS/CDC-appointed medical review board that convenes to reexamine the determination of a Class A medical condition based on an appeal; and update the titles and designations of federal agencies within the text of the regulation.

77 FR 41248 - Disaster Designation Process

Science.gov (United States)

2012-07-13

... more of at least one crop (not property or things included in the rule's definition of physical losses... done to ensure that will not happen with the new process? Response: The general drought authority will... production losses are removed from the definition section. Does that mean that the lack of getting a lender...

78 FR 28654 - Self-Regulatory Organizations; NASDAQ OMX PHLX LLC; Notice of Filing of Proposed Rule Change, as...

Science.gov (United States)

2013-05-15

...-CBOE-2011-114) (order granting approval of a proposed rule change relating to Complex Order processing... rule change relating to Complex Order processing in CBOE's Hybrid 3.0 classes). \\10\\ The Exchange notes... Auction (``DNA'') designation for Complex Orders; (iii) add a definition of conforming ratio; \\8\\ (iv...

Fatigue assessment by the RCC-MR design rules: remarks on the elastic analysis

International Nuclear Information System (INIS)

Taleb, L.; Sidoroff, F.

1999-01-01

According to RCC--MR (French rules for mechanical engineering design of FBR), fatigue life assessment is based on the evaluation of the equivalent elastoplastic strain range resulting from a given cyclic loading. Two methods can be used according to whether an elastoplastic or an elastic structure analysis is performed. The elastic analysis is of course more attractive for it avoids a heavy iterative elastoplastic analysis and an expensive identification of the material behavior from mechanical tests. On the other hand it relies on some empirical extrapolation rules from the elastic to the real case. The purpose of the present paper is to draw attention to some limitations of this procedure. In particular attention will be focused on two points: 1, the classification of the applied stress into primary and secondary parts is essential and it is shown that the thermal stresses which are often considered as secondary may in some cases play a primary role; 2. the Neuber's rule which is used to evaluate the plastic strain from the elastic stress will be shown to be significantly wrong for some special configurations. This is in fact essentially related to situations where the elastic follow up effect is important. (authors)

Integrated layout based Monte-Carlo simulation for design arc optimization

Science.gov (United States)

Shao, Dongbing; Clevenger, Larry; Zhuang, Lei; Liebmann, Lars; Wong, Robert; Culp, James

2016-03-01

Design rules are created considering a wafer fail mechanism with the relevant design levels under various design cases, and the values are set to cover the worst scenario. Because of the simplification and generalization, design rule hinders, rather than helps, dense device scaling. As an example, SRAM designs always need extensive ground rule waivers. Furthermore, dense design also often involves "design arc", a collection of design rules, the sum of which equals critical pitch defined by technology. In design arc, a single rule change can lead to chain reaction of other rule violations. In this talk we present a methodology using Layout Based Monte-Carlo Simulation (LBMCS) with integrated multiple ground rule checks. We apply this methodology on SRAM word line contact, and the result is a layout that has balanced wafer fail risks based on Process Assumptions (PAs). This work was performed at the IBM Microelectronics Div, Semiconductor Research and Development Center, Hopewell Junction, NY 12533

Simple rules for design of exhaust mufflers and a comparison with four-pole and FEM calculations

DEFF Research Database (Denmark)

Jensen, Morten Skaarup; Ødegaard, John

1999-01-01

For good muffler design it is advisable to use an advanced computational method such as four-pole theory or FEM or BEM. To get a starting points for these methods and to suggest adjustments to the geometry and materials it is useful to have some simple rules of thumb. This paper presents a number...... of such "rules", and illustrates their reliability and limitations by comparing with results using some of the advanced computational methods. At the same time, this investigation also gives a comparison between four-pole theory and BEM....

Microscopic processes ruling the bioavailability of Zn to roots of Euphorbia pithyusa L. pioneer plant.

Science.gov (United States)

Medas, Daniela; De Giudici, Giovanni; Casu, Maria Antonietta; Musu, Elodia; Gianoncelli, Alessandra; Iadecola, Antonella; Meneghini, Carlo; Tamburini, Elena; Sprocati, Anna Rosa; Turnau, Katarzyna; Lattanzi, Pierfranco

2015-02-03

Euphorbia pithyusa L. was used in a plant growth-promoting assisted field trial experiment. To unravel the microscopic processes at the interface, thin slices of E. pithyusa roots were investigated by micro-X-ray fluorescence mapping. Roots and rhizosphere materials were examined by X-ray absorption spectroscopy at the Zn K-edge, X-ray diffraction, and scanning electron microscopy. Results indicate some features common to all the investigated samples. (i) In the rhizosphere of E. pithyusa, Zn was found to exist in different phases. (ii) Si and Al are mainly concentrated in a rim at the epidermis of the roots. (iii) Zn is mostly stored in root epidermis and does not appear to be coordinated to organic molecules but mainly occurs in mineral phases such as Zn silicates. We interpreted that roots of E. pithyusa significantly promote mineral evolution in the rhizosphere. Concomitantly, the plant uses Si and Al extracted by soil minerals to build a biomineralization rim, which can capture Zn. This Zn silicate biomineralization has relevant implications for phytoremediation techniques and for further biotechnology development, which can be better designed and developed after specific knowledge of molecular processes ruling mineral evolution and biomineralization processes has been gained.

"Chaos Rules" Revisited

Science.gov (United States)

Murphy, David

2011-01-01

About 20 years ago, while lost in the midst of his PhD research, the author mused over proposed titles for his thesis. He was pretty pleased with himself when he came up with "Chaos Rules" (the implied double meaning was deliberate), or more completely, "Chaos Rules: An Exploration of the Work of Instructional Designers in Distance Education." He…

Design and Optimization of Composite Automotive Hatchback Using Integrated Material-Structure-Process-Performance Method

Science.gov (United States)

Yang, Xudong; Sun, Lingyu; Zhang, Cheng; Li, Lijun; Dai, Zongmiao; Xiong, Zhenkai

2018-03-01

The application of polymer composites as a substitution of metal is an effective approach to reduce vehicle weight. However, the final performance of composite structures is determined not only by the material types, structural designs and manufacturing process, but also by their mutual restrict. Hence, an integrated "material-structure-process-performance" method is proposed for the conceptual and detail design of composite components. The material selection is based on the principle of composite mechanics such as rule of mixture for laminate. The design of component geometry, dimension and stacking sequence is determined by parametric modeling and size optimization. The selection of process parameters are based on multi-physical field simulation. The stiffness and modal constraint conditions were obtained from the numerical analysis of metal benchmark under typical load conditions. The optimal design was found by multi-discipline optimization. Finally, the proposed method was validated by an application case of automotive hatchback using carbon fiber reinforced polymer. Compared with the metal benchmark, the weight of composite one reduces 38.8%, simultaneously, its torsion and bending stiffness increases 3.75% and 33.23%, respectively, and the first frequency also increases 44.78%.

Compensatory Processing During Rule-Based Category Learning in Older Adults

Science.gov (United States)

Bharani, Krishna L.; Paller, Ken A.; Reber, Paul J.; Weintraub, Sandra; Yanar, Jorge; Morrison, Robert G.

2016-01-01

Healthy older adults typically perform worse than younger adults at rule-based category learning, but better than patients with Alzheimer's or Parkinson's disease. To further investigate aging's effect on rule-based category learning, we monitored event-related potentials (ERPs) while younger and neuropsychologically typical older adults performed a visual category-learning task with a rule-based category structure and trial-by-trial feedback. Using these procedures, we previously identified ERPs sensitive to categorization strategy and accuracy in young participants. In addition, previous studies have demonstrated the importance of neural processing in the prefrontal cortex and the medial temporal lobe for this task. In this study, older adults showed lower accuracy and longer response times than younger adults, but there were two distinct subgroups of older adults. One subgroup showed near-chance performance throughout the procedure, never categorizing accurately. The other subgroup reached asymptotic accuracy that was equivalent to that in younger adults, although they categorized more slowly. These two subgroups were further distinguished via ERPs. Consistent with the compensation theory of cognitive aging, older adults who successfully learned showed larger frontal ERPs when compared with younger adults. Recruitment of prefrontal resources may have improved performance while slowing response times. Additionally, correlations of feedback-locked P300 amplitudes with category-learning accuracy differentiated successful younger and older adults. Overall, the results suggest that the ability to adapt one's behavior in response to feedback during learning varies across older individuals, and that the failure of some to adapt their behavior may reflect inadequate engagement of prefrontal cortex. PMID:26422522

Critical examination of valve design according to sub-section B 3500 of the French design and construction rules for mechanical components of PWR nuclear islands (RCCM January 1985 edition)

International Nuclear Information System (INIS)

Huet, J.; Dabrowski, J.F.; Maurin, N.; Quere, M.

1989-01-01

The RCCM design rules for class 1 valves (sub-section B 3500), which apply to Pressurized Water Reactor components, are reviewed and the agreement between the principle of sub-section B 3200 and the rules of sub-section B 3600 concerning piping design is examined. The equations used in the code are examined with respect to their origin, their justification and their conservatism. The applicability of the body shape rules and their relationship with fatigue strength reduction factors are also discussed. A parametric analysis is presented to show the influence of transition radii under different loads, including thermal shock. The study specifically examines the stress concentration factors obtained from a 3D finite element analysis of a tee shaped valve under mechanical loading (pressure, bending, etc.). The objective of this study is to understand and improve the existing rules so that ultimately a program can be written which will allow the stress calculations to be confirmed quickly using a microcomputer. (author)

The Critical Design Process

DEFF Research Database (Denmark)

Brunsgaard, Camilla; Knudstrup, Mary-Ann; Heiselberg, Per

2014-01-01

within Danish tradition of architecture and construction. The objective of the research presented in this paper, is to compare the different design processes behind the making of passive houses in a Danish context. We evaluated the process with regard to the integrated and traditional design process....... Data analysis showed that the majority of the consortiums worked in an integrated manner; though there was room for improvment. Additionally, the paper discusses the challanges of implementing the integrated design process in practice and suggests ways of overcomming some of the barriers . In doing so...

Reduced softening of EUROFER 97 under thermo-mechanical and multiaxial fatigue loading and its impact on the design rules

International Nuclear Information System (INIS)

Aktaa, J.; Weick, M.; Petersen, C.

2007-01-01

Full text of publication follows: Toward test blanket module (TBM) in ITER and DEMO fusion power plants design rules for components built from EUROFER 97 get more and more in the midpoint of interest. One of the specific characteristic of EUROFER 97 as a ferritic-martensitic steel is its cyclic softening yielding to lower stresses under strain controlled fatigue loading and thus longer lifetimes. However our thermo-mechanical and multiaxial fatigue tests showed lifetimes remarkably lower than those expected on the base of isothermal uniaxial fatigue tests. Reduced cyclic softening observed in these experiments is believed as one of the reasons of the shorter fatigue lifetimes. When applying the design rules, derived for EUROFER 97 on the base of isothermal uniaxial data considering the recommendations in the ASME and RCC-MR code, to our thermo-mechanical and multiaxial fatigue tests for verification strong loss in their conservatism has been found. The lifetimes observed in a part of the multiaxial experiments are even lower than the design lifetimes supposed to be sufficiently conservative. To overcome this problem new design rules are proposed among others on the base of damage and lifetime prediction model developed lately for EUROFER 97. In this paper the experimental findings as well as the new design approaches will be presented and discussed. (authors)

RCC-C: Design and construction rules for fuel assemblies of PWR nuclear power plants

International Nuclear Information System (INIS)

2015-01-01

The RCC-C code contains all the requirements for the design, fabrication and inspection of nuclear fuel assemblies and the different types of core components (rod cluster control assemblies, burnable poison rod assemblies, primary and secondary source assemblies and thimble plug assemblies). The design, fabrication and inspection rules defined in RCC-C leverage the results of the research and development work pioneered in France, Europe and worldwide, and which have been successfully used by industry to design and build nuclear fuel assemblies and incorporate the resulting feedback. The code's scope covers: fuel system design, especially for assemblies, the fuel rod and associated core components, the characteristics to be checked for products and parts, fabrication methods and associated inspection methods. The RCC-C code is used by the operator of the PWR nuclear power plants in France as a reference when sourcing fuel from the world's top two suppliers in the PWR market, given that the French operator is the world's largest buyer of PWR fuel. Fuel for EPR projects is manufactured according to the provisions of the RCC-C code. The code is available in French and English. The 2005 edition has been translated into Chinese. Contents of the 2015 edition of the RCC-C code: Chapter 1 - General provisions: 1.1 Purpose of the RCC-C, 1.2 Definitions, 1.3 Applicable standards, 1.4 Equipment subject to the RCC-C, 1.5 Management system, 1.6 Processing of non-conformances; Chapter 2 - Description of the equipment subject to the RCC-C: 2.1 Fuel assembly, 2.2 Core components; Chapter 3 - Design: Safety functions, operating functions and environment of fuel assemblies and core components, design and safety principles; Chapter 4 - Manufacturing: 4.1 Materials and part characteristics, 4.2 Assembly requirements, 4.3 Manufacturing and inspection processes, 4.4 Inspection methods, 4.5 Certification of NDT inspectors, 4.6 Characteristics to be inspected for the

Chemical process hazards analysis

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-02-01

The Office of Worker Health and Safety (EH-5) under the Assistant Secretary for the Environment, Safety and Health of the US Department (DOE) has published two handbooks for use by DOE contractors managing facilities and processes covered by the Occupational Safety and Health Administration (OSHA) Rule for Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119), herein referred to as the PSM Rule. The PSM Rule contains an integrated set of chemical process safety management elements designed to prevent chemical releases that can lead to catastrophic fires, explosions, or toxic exposures. The purpose of the two handbooks, ``Process Safety Management for Highly Hazardous Chemicals`` and ``Chemical Process Hazards Analysis,`` is to facilitate implementation of the provisions of the PSM Rule within the DOE. The purpose of this handbook ``Chemical Process Hazards Analysis,`` is to facilitate, within the DOE, the performance of chemical process hazards analyses (PrHAs) as required under the PSM Rule. It provides basic information for the performance of PrHAs, and should not be considered a complete resource on PrHA methods. Likewise, to determine if a facility is covered by the PSM rule, the reader should refer to the handbook, ``Process Safety Management for Highly Hazardous Chemicals`` (DOE- HDBK-1101-96). Promulgation of the PSM Rule has heightened the awareness of chemical safety management issues within the DOE. This handbook is intended for use by DOE facilities and processes covered by the PSM rule to facilitate contractor implementation of the PrHA element of the PSM Rule. However, contractors whose facilities and processes not covered by the PSM Rule may also use this handbook as a basis for conducting process hazards analyses as part of their good management practices. This handbook explains the minimum requirements for PrHAs outlined in the PSM Rule. Nowhere have requirements been added beyond what is specifically required by the rule.

Hadronic processes with large transfer momenta and quark counting rules in multiparticle dual amplitude

International Nuclear Information System (INIS)

Akkelin, S.V.; Kobylinskij, N.A.; Martynov, E.S.

1989-01-01

A dual N-particle amplitude satisfying the quark counting rules for the processes with large transfer momenta is constructed. The multiparticle channels are shown to give an essential contribution to the amplitude decreasing power in a hard kinematic limit. 19 refs.; 9 figs

Ecological Interface Design

DEFF Research Database (Denmark)

Vicente, Kim J.; Rasmussen, Jens

1992-01-01

A theoretical framework for designing interfaces for complex human-machine systems is proposed. The framework, called ecological interface design (EID), is based on the skills, rules, knowledge taxonomy of cognitive control. The basic goal of EID is twofold: first, not to force processing...

Behavioural design: A process for integrating behaviour change and design

DEFF Research Database (Denmark)

Cash, Philip; Hartlev, Charlotte Gram; Durazo, Christine Boysen

2017-01-01

Nudge, persuasion, and the influencing of human behaviour through design are increasingly important topics in design research and in the wider public consciousness. However, current theoretical approaches to behaviour change have yet to be operationalized this in design process support....... Specifically, there are few empirically grounded processes supporting designers in realising behaviour change projects. In response to this, 20 design projects from a case company are analysed in order to distil a core process for behavioural design. Results show a number of process stages and activities...... associated with project success, pointing to a new perspective on the traditional design process, and allowing designers to integrate key insights from behaviour change theory. Using this foundation we propose the Behavioural Design process....

Action Rules Mining

CERN Document Server

Dardzinska, Agnieszka

2013-01-01

We are surrounded by data, numerical, categorical and otherwise, which must to be analyzed and processed to convert it into information that instructs, answers or aids understanding and decision making. Data analysts in many disciplines such as business, education or medicine, are frequently asked to analyze new data sets which are often composed of numerous tables possessing different properties. They try to find completely new correlations between attributes and show new possibilities for users.   Action rules mining discusses some of data mining and knowledge discovery principles and then describe representative concepts, methods and algorithms connected with action. The author introduces the formal definition of action rule, notion of a simple association action rule and a representative action rule, the cost of association action rule, and gives a strategy how to construct simple association action rules of a lowest cost. A new approach for generating action rules from datasets with numerical attributes...

Experiments towards establishing of design rules for R2R-UV-NIL with polymer working shims

Science.gov (United States)

Nees, Dieter; Ruttloff, Stephan; Palfinger, Ursula; Stadlober, Barbara

2016-03-01

Roll-to-Roll-UV-nanoimprint lithography (R2R-UV-NIL) enables high resolution large area patterning of flexible substrates and is therefore of increasing industrial interest. We have set up a custom-made R2R-UV-NIL pilot machine which is able to convert 10 inch wide web with velocities of up to 30 m/min. In addition, we have developed self-replicable UV-curable resins with tunable surface energy and Young's modulus for UV-imprint material as well as for polymer working stamp/shim manufacturing. Now we have designed test patterns for the evaluation of the impact of structure shape, critical dimension, pitch, depth, side wall angle and orientation relative to the web movement onto the imprint fidelity and working shim life time. We have used female (recessed structures) silicon masters of that design with critical dimensions between CD = 200 nm and 1600 nm, and structure depths of d = 500 nm and 1000 nm - all with vertical as well as inclined side walls. These entire master patterns have been transferred onto single male (protruding structures) R2R polymer working shims. The polymer working shims have been used for R2R-UV-NIL runs of several hundred meters and the imprint fidelity and process stability of the various test patterns have been compared. This study is intended as a first step towards establishing of design rules and developing of nanoimprint proximity correction strategies for industrial R2R-UV-NIL processes using polymer working shims.

Design Process-System and Methodology of Design Research

Science.gov (United States)

Bashier, Fathi

2017-10-01

Studies have recognized the failure of the traditional design approach both in practice and in the studio. They showed that design problems today are too complex for the traditional approach to cope with and reflected a new interest in a better quality design services in order to meet the challenges of our time. In the mid-1970s and early 1980s, there has been a significant shift in focus within the field of design research towards the aim of creating a ‘design discipline’. The problem, as will be discussed, is the lack of an integrated theory of design knowledge that can explicitly describe the design process in a coherent way. As a consequence, the traditional approach fails to operate systematically, in a disciplinary manner. Addressing this problem is the primary goal of the research study in the design process currently being conducted in the research-based master studio at Wollega University, Ethiopia. The research study seeks to make a contribution towards a disciplinary approach, through proper understanding the mechanism of knowledge development within design process systems. This is the task of the ‘theory of design knowledge’. In this article the research project is introduced, and a model of the design process-system is developed in the studio as a research plan and a tool of design research at the same time. Based on data drawn from students’ research projects, the theory of design knowledge is developed and empirically verified through the research project.

Rules Extraction with an Immune Algorithm

Directory of Open Access Journals (Sweden)

Deqin Yan

2007-12-01

Full Text Available In this paper, a method of extracting rules with immune algorithms from information systems is proposed. Designing an immune algorithm is based on a sharing mechanism to extract rules. The principle of sharing and competing resources in the sharing mechanism is consistent with the relationship of sharing and rivalry among rules. In order to extract rules efficiently, a new concept of flexible confidence and rule measurement is introduced. Experiments demonstrate that the proposed method is effective.

Knowledge Representation and Inference for Analysis and Design of Database and Tabular Rule-Based Systems

Directory of Open Access Journals (Sweden)

Antoni Ligeza

2001-01-01

Full Text Available Rulebased systems constitute a powerful tool for specification of knowledge in design and implementation of knowledge based systems. They provide also a universal programming paradigm for domains such as intelligent control, decision support, situation classification and operational knowledge encoding. In order to assure safe and reliable performance, such system should satisfy certain formal requirements, including completeness and consistency. This paper addresses the issue of analysis and verification of selected properties of a class of such system in a systematic way. A uniform, tabular scheme of single-level rule-based systems is considered. Such systems can be applied as a generalized form of databases for specification of data pattern (unconditional knowledge, or can be used for defining attributive decision tables (conditional knowledge in form of rules. They can also serve as lower-level components of a hierarchical multi-level control and decision support knowledge-based systems. An algebraic knowledge representation paradigm using extended tabular representation, similar to relational database tables is presented and algebraic bases for system analysis, verification and design support are outlined.

Installations of in-vivo nuclear medicine: Minimal technical rules of design, operation and maintenance. Guide Nr 32 - Release of the 2017/05/24

International Nuclear Information System (INIS)

2017-01-01

After having evoked the regulatory context, this document details the different articles contained by a decision taken by the ASN in October 2014 to define the minimal technical rules of design, operation and maintenance of installations dedicated to in-vivo nuclear medicine. It is therefore written for the different professions involved in nuclear medicine, and its content is to be reflected by modifications introduced in the French labour code and public health code. The following issues and aspects are addressed: general principles adopted for the decision, design rules (for premises, for equipments and for premises ventilation), operation rules (general and specific rules), and various and transient measures. For each of these issues, the texts of concerned articles are indicated and their content is then explained in a detailed way

Strategy as simple rules.

Science.gov (United States)

Eisenhardt, K M; Sull, D N

2001-01-01

The success of Yahoo!, eBay, Enron, and other companies that have become adept at morphing to meet the demands of changing markets can't be explained using traditional thinking about competitive strategy. These companies have succeeded by pursuing constantly evolving strategies in market spaces that were considered unattractive according to traditional measures. In this article--the third in an HBR series by Kathleen Eisenhardt and Donald Sull on strategy in the new economy--the authors ask, what are the sources of competitive advantage in high-velocity markets? The secret, they say, is strategy as simple rules. The companies know that the greatest opportunities for competitive advantage lie in market confusion, but they recognize the need for a few crucial strategic processes and a few simple rules. In traditional strategy, advantage comes from exploiting resources or stable market positions. In strategy as simple rules, advantage comes from successfully seizing fleeting opportunities. Key strategic processes, such as product innovation, partnering, or spinout creation, place the company where the flow of opportunities is greatest. Simple rules then provide the guidelines within which managers can pursue such opportunities. Simple rules, which grow out of experience, fall into five broad categories: how- to rules, boundary conditions, priority rules, timing rules, and exit rules. Companies with simple-rules strategies must follow the rules religiously and avoid the temptation to change them too frequently. A consistent strategy helps managers sort through opportunities and gain short-term advantage by exploiting the attractive ones. In stable markets, managers rely on complicated strategies built on detailed predictions of the future. But when business is complicated, strategy should be simple.

Horizontal and Vertical Rule Bases Method in Fuzzy Controllers

OpenAIRE

Aminifar, Sadegh; bin Marzuki, Arjuna

2013-01-01

Concept of horizontal and vertical rule bases is introduced. Using this method enables the designers to look for main behaviors of system and describes them with greater approximations. The rules which describe the system in first stage are called horizontal rule base. In the second stage, the designer modulates the obtained surface by describing needed changes on first surface for handling real behaviors of system. The rules used in the second stage are called vertical rule base. Horizontal...

RISMA: A Rule-based Interval State Machine Algorithm for Alerts Generation, Performance Analysis and Monitoring Real-Time Data Processing

Science.gov (United States)

Laban, Shaban; El-Desouky, Aly

2013-04-01

The monitoring of real-time systems is a challenging and complicated process. So, there is a continuous need to improve the monitoring process through the use of new intelligent techniques and algorithms for detecting exceptions, anomalous behaviours and generating the necessary alerts during the workflow monitoring of such systems. The interval-based or period-based theorems have been discussed, analysed, and used by many researches in Artificial Intelligence (AI), philosophy, and linguistics. As explained by Allen, there are 13 relations between any two intervals. Also, there have also been many studies of interval-based temporal reasoning and logics over the past decades. Interval-based theorems can be used for monitoring real-time interval-based data processing. However, increasing the number of processed intervals makes the implementation of such theorems a complex and time consuming process as the relationships between such intervals are increasing exponentially. To overcome the previous problem, this paper presents a Rule-based Interval State Machine Algorithm (RISMA) for processing, monitoring, and analysing the behaviour of interval-based data, received from real-time sensors. The proposed intelligent algorithm uses the Interval State Machine (ISM) approach to model any number of interval-based data into well-defined states as well as inferring them. An interval-based state transition model and methodology are presented to identify the relationships between the different states of the proposed algorithm. By using such model, the unlimited number of relationships between similar large numbers of intervals can be reduced to only 18 direct relationships using the proposed well-defined states. For testing the proposed algorithm, necessary inference rules and code have been designed and applied to the continuous data received in near real-time from the stations of International Monitoring System (IMS) by the International Data Centre (IDC) of the Preparatory

Run charts revisited: a simulation study of run chart rules for detection of non-random variation in health care processes.

Science.gov (United States)

Anhøj, Jacob; Olesen, Anne Vingaard

2014-01-01

A run chart is a line graph of a measure plotted over time with the median as a horizontal line. The main purpose of the run chart is to identify process improvement or degradation, which may be detected by statistical tests for non-random patterns in the data sequence. We studied the sensitivity to shifts and linear drifts in simulated processes using the shift, crossings and trend rules for detecting non-random variation in run charts. The shift and crossings rules are effective in detecting shifts and drifts in process centre over time while keeping the false signal rate constant around 5% and independent of the number of data points in the chart. The trend rule is virtually useless for detection of linear drift over time, the purpose it was intended for.

Designing future learning. A posthumanist approach to researching design processes

DEFF Research Database (Denmark)

Juelskjær, Malou

I investigate how a design process – leading up to the design of a new education building - enact, transform and highlight tacit everyday practices and experiences in an education setting, whereby becoming an art of managing. I apply a post-humanist performative perspective, highlighting entangled...... agencies rather than focusing on human agency. I focus on the design process rather than the designer. The design process accelerated and performed past and future experiences of schooling, learning, teaching. This called for analytical attention to agential forces of not only the material but also...... and temporalities matter in design processes. Furthermore, the analysis emphasise how design translate affective economies and that attention to those affective economies are vital for the result of the design process....

Multi-objective LQR with optimum weight selection to design FOPID controllers for delayed fractional order processes.

Science.gov (United States)

Das, Saptarshi; Pan, Indranil; Das, Shantanu

2015-09-01

An optimal trade-off design for fractional order (FO)-PID controller is proposed with a Linear Quadratic Regulator (LQR) based technique using two conflicting time domain objectives. A class of delayed FO systems with single non-integer order element, exhibiting both sluggish and oscillatory open loop responses, have been controlled here. The FO time delay processes are handled within a multi-objective optimization (MOO) formalism of LQR based FOPID design. A comparison is made between two contemporary approaches of stabilizing time-delay systems withinLQR. The MOO control design methodology yields the Pareto optimal trade-off solutions between the tracking performance and total variation (TV) of the control signal. Tuning rules are formed for the optimal LQR-FOPID controller parameters, using median of the non-dominated Pareto solutions to handle delayed FO processes. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Reengineering the Project Design Process

Science.gov (United States)

Casani, E.; Metzger, R.

1994-01-01

In response to NASA's goal of working faster, better and cheaper, JPL has developed extensive plans to minimize cost, maximize customer and employee satisfaction, and implement small- and moderate-size missions. These plans include improved management structures and processes, enhanced technical design processes, the incorporation of new technology, and the development of more economical space- and ground-system designs. The Laboratory's new Flight Projects Implementation Office has been chartered to oversee these innovations and the reengineering of JPL's project design process, including establishment of the Project Design Center and the Flight System Testbed. Reengineering at JPL implies a cultural change whereby the character of its design process will change from sequential to concurrent and from hierarchical to parallel. The Project Design Center will support missions offering high science return, design to cost, demonstrations of new technology, and rapid development. Its computer-supported environment will foster high-fidelity project life-cycle development and cost estimating.

Do Fiscal Rules Matter?

DEFF Research Database (Denmark)

Grembi, Veronica; Nannicini, Tommaso; Troiano, Ugo

2016-01-01

, the central government imposed fiscal rules on municipal governments, and in 2001 relaxed them below 5,000 inhabitants. We exploit the before/after and discontinuous policy variation, and show that relaxing fiscal rules increases deficits and lowers taxes. The effect is larger if the mayor can be reelected......Fiscal rules are laws aimed at reducing the incentive to accumulate debt, and many countries adopt them to discipline local governments. Yet, their effectiveness is disputed because of commitment and enforcement problems. We study their impact applying a quasi-experimental design in Italy. In 1999...

Design Thinking in Elementary Students' Collaborative Lamp Designing Process

Science.gov (United States)

Kangas, Kaiju; Seitamaa-Hakkarainen, Pirita; Hakkarainen, Kai

2013-01-01

Design and Technology education is potentially a rich environment for successful learning, if the management of the whole design process is emphasised, and students' design thinking is promoted. The aim of the present study was to unfold the collaborative design process of one team of elementary students, in order to understand their multimodal…

Designing driver assistance systems with crossmodal signals: multisensory integration rules for saccadic reaction times apply.

Directory of Open Access Journals (Sweden)

Rike Steenken

Full Text Available Modern driver assistance systems make increasing use of auditory and tactile signals in order to reduce the driver's visual information load. This entails potential crossmodal interaction effects that need to be taken into account in designing an optimal system. Here we show that saccadic reaction times to visual targets (cockpit or outside mirror, presented in a driving simulator environment and accompanied by auditory or tactile accessories, follow some well-known spatiotemporal rules of multisensory integration, usually found under confined laboratory conditions. Auditory nontargets speed up reaction time by about 80 ms. The effect tends to be maximal when the nontarget is presented 50 ms before the target and when target and nontarget are spatially coincident. The effect of a tactile nontarget (vibrating steering wheel was less pronounced and not spatially specific. It is shown that the average reaction times are well-described by the stochastic "time window of integration" model for multisensory integration developed by the authors. This two-stage model postulates that crossmodal interaction occurs only if the peripheral processes from the different sensory modalities terminate within a fixed temporal interval, and that the amount of crossmodal interaction manifests itself in an increase or decrease of second stage processing time. A qualitative test is consistent with the model prediction that the probability of interaction, but not the amount of crossmodal interaction, depends on target-nontarget onset asynchrony. A quantitative model fit yields estimates of individual participants' parameters, including the size of the time window. Some consequences for the design of driver assistance systems are discussed.

Valid knowledge for the professional design of large and complex design processes

NARCIS (Netherlands)

Aken, van J.E.

2004-01-01

The organization and planning of design processes, which we may regard as design process design, is an important issue. Especially for large and complex design-processes traditional approaches to process design may no longer suffice. The design literature gives quite some design process models. As

Business model for business rules

NARCIS (Netherlands)

Eline Haan; Martin Zoet; Koen Smit

2014-01-01

Business rule models are widely applied, standalone and embedded in smart objects. They have become segregated from information technology and they are now a valuable asset in their own right. As more business rule models are becoming assets, business models to monetize these assets are designed.

Recent evolutions of French design and construction rules

Energy Technology Data Exchange (ETDEWEB)

Lambs, R.; Grandemange, J.M. [Framatome ANP GmbH - NBTT, Erlangen (Germany); Paris, D.; Faidy, C. [Electricite de France (EDF), 75 - Paris (France)

2001-07-01

This paper summarises the studies and evaluations made in order to support the recent evolutions of the French Design and Construction Rules, with the objective to improve the competitiveness of nuclear power plants. To this aim, an inquiry was conducted with Suppliers, in order to identify the topics corresponding to cost reduction potentials. Following this inquiry, the RCC-M construction code provisions which may be improved in order to reduce the cost were identified and highlighted compared to the others cost-intensive requirements falling outside the code scope. In parallel, other non-nuclear codes, such as CODAP and CODETI in France for Vessels, heat exchangers and piping, and ASME VIII were analysed in order to evaluate the possibility to refer to more standard alternatives for safety related mechanical components. In such a case, eventual complementary requirements should be specified, and some exercises of application were conducted with the suppliers on typical examples. In order to finalize the overview, return of operating experience was addressed and discussed with the Safety Authority, leading to complementary precautions, in particular on fatigue and fast fracture prevention. The corresponding revisions have been included in the 2000 edition of the RCC-M construction code. (author)

Recent evolutions of French design and construction rules

International Nuclear Information System (INIS)

Lambs, R.; Grandemange, J.M.; Paris, D.; Faidy, C.

2001-01-01

This paper summarises the studies and evaluations made in order to support the recent evolutions of the French Design and Construction Rules, with the objective to improve the competitiveness of nuclear power plants. To this aim, an inquiry was conducted with Suppliers, in order to identify the topics corresponding to cost reduction potentials. Following this inquiry, the RCC-M construction code provisions which may be improved in order to reduce the cost were identified and highlighted compared to the others cost-intensive requirements falling outside the code scope. In parallel, other non-nuclear codes, such as CODAP and CODETI in France for Vessels, heat exchangers and piping, and ASME VIII were analysed in order to evaluate the possibility to refer to more standard alternatives for safety related mechanical components. In such a case, eventual complementary requirements should be specified, and some exercises of application were conducted with the suppliers on typical examples. In order to finalize the overview, return of operating experience was addressed and discussed with the Safety Authority, leading to complementary precautions, in particular on fatigue and fast fracture prevention. The corresponding revisions have been included in the 2000 edition of the RCC-M construction code. (author)

A performance benchmark over semantic rule checking approaches in construction industry

NARCIS (Netherlands)

Pauwels, P.; de Farias, T.; Zhang, C.; Roxin, A.; Beetz, J.; De Roo, J.; Nicolle, C.

2017-01-01

As more and more architectural design and construction data is represented using the Resource Description Framework (RDF) data model, it makes sense to take advantage of the logical basis of RDF and implement a semantic rule checking process as it is currently not available in the architectural

A Rule-Based Local Search Algorithm for General Shift Design Problems in Airport Ground Handling

DEFF Research Database (Denmark)

Clausen, Tommy

We consider a generalized version of the shift design problem where shifts are created to cover a multiskilled demand and fit the parameters of the workforce. We present a collection of constraints and objectives for the generalized shift design problem. A local search solution framework with mul......We consider a generalized version of the shift design problem where shifts are created to cover a multiskilled demand and fit the parameters of the workforce. We present a collection of constraints and objectives for the generalized shift design problem. A local search solution framework...... with multiple neighborhoods and a loosely coupled rule engine based on simulated annealing is presented. Computational experiments on real-life data from various airport ground handling organization show the performance and flexibility of the proposed algorithm....

Permanent certification program for health information technology; revisions to ONC-Approved Accreditor processes. Final rule.

Science.gov (United States)

2011-11-25

Under the authority granted to the National Coordinator for Health Information Technology by section 3001(c)(5) of the Public Health Service Act (PHSA) as added by the Health Information Technology for Economic and Clinical Health (HITECH) Act, this final rule establishes a process for addressing instances where the ONC-Approved Accreditor (ONC-AA) engages in improper conduct or does not perform its responsibilities under the permanent certification program. This rule also addresses the status of ONC-Authorized Certification Bodies (ONC-ACBs) in instances where there may be a change in the accreditation organization serving as the ONC-AA and clarifies the responsibilities of the new ONC-AA.

Designing adaptive operating rules for a large multi-purpose reservoir

Science.gov (United States)

Geressu, Robel; Rougé, Charles; Harou, Julien

2017-04-01

Reservoirs whose live storage capacity is large compared with annual inflow have "memory", i.e., their storage levels contain information about past inflows and reservoir operations. Such "long-memory" reservoirs can be found in basins in dry regions such as the Nile River Basin in Africa, the Colorado River Basin in the US, or river basins in Western and Central Asia. There the effects of a dry year have the potential to impact reservoir levels and downstream releases for several subsequent years, prompting tensions in transboundary basins. Yet, current reservoir operation rules in those reservoirs do not reflect this by integrating past climate history and release decisions among the factors that influence operating decisions. This work proposes and demonstrates an adaptive reservoir operating rule that explicitly accounts for the recent history of release decisions, and not only current storage level and near-term inflow forecasts. This implies adding long-term (e.g., multiyear) objectives to the existing short-term (e.g., annual) ones. We apply these operating rules to the Grand Ethiopian Renaissance Dam, a large reservoir under construction on the Blue Nile River. Energy generation has to be balanced with the imperative of releasing enough water in low flow years (e.g., the minimum 1, 2 or 3 year cumulative flow) to avoid tensions with downstream countries, Sudan and Egypt. Maximizing the minimum multi-year releases could be of interest for the Nile problem to minimize the impact on performance of the large High Aswan Dam in Egypt. Objectives include maximizing the average and minimum annual energy generation and maximizing the minimum annual, two year and three year cumulative releases. The system model is tested using 30 stochastically generated streamflow series. One can then derive adaptive release rules depending on the value of one- and two-year total releases with respect to thresholds. Then, there are 3 sets of release rules for the reservoir depending

Application of Safeguards-by-Design to a Reactor Design Process

International Nuclear Information System (INIS)

Whitlock, J.J.

2010-01-01

The application of 'Safeguards-by-Design' (SBD) to a reactor design process is described. The SBD concept seeks to improve the efficiency and effectiveness of IAEA safeguards by incorporating the needs of safeguards at an early stage of reactor design. Understanding and accommodating safeguards in the design process requires a set of 'design requirements for safeguards'; however, such requirements (a) do not traditionally exist, and (b) must exist alongside other more traditional design requirements based upon compliance and operational goals. In the absence of design requirements, a 'Design Guide' for safeguards was created, consisting of recommendations based on best practices. To acquire an understanding of safeguards requirements at the design level, a systematic accounting of diversion pathways was required. However, because of the crowded field of other design requirements, this process needed a methodology that was also flexible in interpretation. The GenIV Proliferation Resistance and Physical Protection (PR and PP) methodology (Rev.5, 2005) was chosen for this exercise. The PR and PP methodology is a general approach and therefore it was necessary to restrict its application; in effect, turning 'off' various options so as to simplify the process. The results of this exercise were used to stimulate discussions with the design team and initiate changes that accommodate safeguards without negatively impacting other design requirements. The process yielded insights into the effective application of SBD, and highlighted issues that must be resolved for effective incorporation of an 'SBD culture' within the design process. (author)

Can complex cellular processes be governed by simple linear rules?

Science.gov (United States)

Selvarajoo, Kumar; Tomita, Masaru; Tsuchiya, Masa

2009-02-01

Complex living systems have shown remarkably well-orchestrated, self-organized, robust, and stable behavior under a wide range of perturbations. However, despite the recent generation of high-throughput experimental datasets, basic cellular processes such as division, differentiation, and apoptosis still remain elusive. One of the key reasons is the lack of understanding of the governing principles of complex living systems. Here, we have reviewed the success of perturbation-response approaches, where without the requirement of detailed in vivo physiological parameters, the analysis of temporal concentration or activation response unravels biological network features such as causal relationships of reactant species, regulatory motifs, etc. Our review shows that simple linear rules govern the response behavior of biological networks in an ensemble of cells. It is daunting to know why such simplicity could hold in a complex heterogeneous environment. Provided physical reasons can be explained for these phenomena, major advancement in the understanding of basic cellular processes could be achieved.

The Design and Implementation of the Ariel Active Database Rule System

Science.gov (United States)

1991-10-01

but only as a main-memory prototype. The POSTGRES rule system (PRS) [SHP88, SRH90] and the Starburst rule system (SRS) [WCL91, HCL+90] have been...query language of POSTGRES for specifying data definition commands, queries and updates [SRH90]. POSTQUEL commands retrieve, append, delete, and replace...placed on an arbitrary attribute (e.g., one without an index) ( POSTGRES rule system [SHP88, SHP89, SR1I90], HiPAC [C+891, DIPS [SLR89], Alert [SPAM91

Example process hazard analysis of a Department of Energy water chlorination process

Energy Technology Data Exchange (ETDEWEB)

1993-09-01

On February 24, 1992, the Occupational Safety and Health Administration (OSHA) released a revised version of Section 29 Code of Federal Regulations CFR Part 1910 that added Section 1910.119, entitled ``Process Safety Management of Highly Hazardous Chemicals`` (the PSM Rule). Because US Department of Energy (DOE) Orders 5480.4 and 5483.1A prescribe OSHA 29 CFR 1910 as a standard in DOE, the PSM Rule is mandatory in the DOE complex. A major element in the PSM Rule is the process hazard analysis (PrHA), which is required for all chemical processes covered by the PSM Rule. The PrHA element of the PSM Rule requires the selection and application of appropriate hazard analysis methods to systematically identify hazards and potential accident scenarios associated with processes involving highly hazardous chemicals (HHCs). The analysis in this report is an example PrHA performed to meet the requirements of the PSM Rule. The PrHA method used in this example is the hazard and operability (HAZOP) study, and the process studied is the new Hanford 300-Area Water Treatment Facility chlorination process, which is currently in the design stage. The HAZOP study was conducted on May 18--21, 1993, by a team from the Westinghouse Hanford Company (WHC), Battelle-Columbus, the DOE, and Pacific Northwest Laboratory (PNL). The chlorination process was chosen as the example process because it is common to many DOE sites, and because quantities of chlorine at those sites generally exceed the OSHA threshold quantities (TQs).

Effects of surveillance on the rule of law, due process and the presumption of innocence

NARCIS (Netherlands)

Galetta, Antonella; de Hert, Paul; Wright, D.; Kreissl, R.

2015-01-01

This contribution focuses on the impact of surveillance on the rule of law, due process and the presumption of innocence, key values and principles of a democratic order. It illustrates how they are implemented and enforced in contemporary surveillance societies, while referring to European law and

Business Rules Definition for Decision Support System Using Matrix Grammar

Directory of Open Access Journals (Sweden)

Eva Zámečníková

2016-06-01

Full Text Available This paper deals with formalization of business rules by formal grammars. In our work we focus on methods for high frequency data processing. We process data by using complex event platforms (CEP which allow to process high volume of data in nearly real time. Decision making process is contained by one level of processing of CEP. Business rules are used for decision making process description. For the business rules formalization we chose matrix grammar. The use of formal grammars is quite natural as the structure of rules and its rewriting is very similar both for the business rules and for formal grammar. In addition the matrix grammar allows to simulate dependencies and correlations between the rules. The result of this work is a model for data processing of knowledge-based decision support system described by the rules of formal grammar. This system will support the decision making in CEP. This solution may contribute to the speedup of decision making process in complex event processing and also to the formal verification of these systems.

Consensus states of local majority rule in stochastic process

Energy Technology Data Exchange (ETDEWEB)

Luo, Yu-Pin [Department of Electronic Engineering, National Formosa University, Huwei, 63201, Taiwan (China); Tang, Chia-Wei; Xu, Hong-Yuan [Department of Physics, Chung-Yuan Christian University, Chungli, 32023, Taiwan (China); Wu, Jinn-Wen [Department of Applied Mathematics, Chung-Yuan Christian University, Chungli, 32023, Taiwan (China); Huang, Ming-Chang, E-mail: mchuang@cycu.edu.tw [Center for Theoretical Science and Department of Physics, Chung-Yuan Christian University, Chungli, 32023, Taiwan (China)

2015-04-03

A sufficient condition for a network system to reach a consensus state of the local majority rule is shown. The influence of interpersonal environment on the occurrence probability of consensus states for Watts–Strogatz and scale-free networks with random initial states is analyzed by numerical method. We also propose a stochastic local majority rule to study the mean first passage time from a random state to a consensus and the escape rate from a consensus state for systems in a noisy environment. Our numerical results show that there exists a window of fluctuation strengths for which the mean first passage time from a random to a consensus state reduces greatly, and the escape rate of consensus states obeys the Arrhenius equation in the window. - Highlights: • A sufficient condition for reaching a consensus. • The relation between the geometry of networks and the reachability of a consensus. • Stochastic local majority rule. • The mean first-passage time and the escape rate of consensus states.

Consensus states of local majority rule in stochastic process

International Nuclear Information System (INIS)

Luo, Yu-Pin; Tang, Chia-Wei; Xu, Hong-Yuan; Wu, Jinn-Wen; Huang, Ming-Chang

2015-01-01

A sufficient condition for a network system to reach a consensus state of the local majority rule is shown. The influence of interpersonal environment on the occurrence probability of consensus states for Watts–Strogatz and scale-free networks with random initial states is analyzed by numerical method. We also propose a stochastic local majority rule to study the mean first passage time from a random state to a consensus and the escape rate from a consensus state for systems in a noisy environment. Our numerical results show that there exists a window of fluctuation strengths for which the mean first passage time from a random to a consensus state reduces greatly, and the escape rate of consensus states obeys the Arrhenius equation in the window. - Highlights: • A sufficient condition for reaching a consensus. • The relation between the geometry of networks and the reachability of a consensus. • Stochastic local majority rule. • The mean first-passage time and the escape rate of consensus states

Rule based deterioration identification and management system

International Nuclear Information System (INIS)

Kataoka, S.; Pavinich, W.; Lapides, M.

1993-01-01

Under the sponsorship of IHI and EPRI, a rule-based screening system has been developed that can be used by utility engineers to determine which deterioration mechanisms are acting on specific LWR components, and to evaluate the efficacy of an age-related deterioration management program. The screening system was developed using the rule-based shell, NEXPERT, which provides traceability to the data sources used in the logic development. The system addresses all the deterioration mechanisms of specific metals encountered in either BWRs or PWRs. Deterioration mechanisms are listed with reasons why they may occur during the design life of LWRs, considering the plant environment, manufacturing process, service history, material chemical composition, etc. of components in a specific location of a LWR. To eliminate the evaluation of inactive deterioration quickly, a tier structure is applied to the rules. The reasons why deterioration will occur are extracted automatically by backward chaining. To reduce the amount of user input, plant environmental data are stored in files as default environmental data. (author)

Reengineering the project design process

Science.gov (United States)

Kane Casani, E.; Metzger, Robert M.

1995-01-01

In response to the National Aeronautics and Space Administration's goal of working faster, better, and cheaper, the Jet Propulsion Laboratory (JPL) has developed extensive plans to minimize cost, maximize customer and employee satisfaction, and implement small- and moderate-size missions. These plans include improved management structures and processes, enhanced technical design processes, the incorporation of new technology, and the development of more economical space- and ground-system designs. The Laboratory's new Flight Projects Implementation Development Office has been chartered to oversee these innovations and the reengineering of JPL's project design process, including establishment of the Project Design Center (PDC) and the Flight System Testbed (FST). Reengineering at JPL implies a cultural change whereby the character of the Laboratory's design process will change from sequential to concurrent and from hierarchical to parallel. The Project Design Center will support missions offering high science return, design to cost, demonstrations of new technology, and rapid development. Its computer-supported environment will foster high-fidelity project life-cycle development and more accurate cost estimating. These improvements signal JPL's commitment to meeting the challenges of space exploration in the next century.

The Digital Design Process - Reflections on a Single Design Case

NARCIS (Netherlands)

Achten, H.H.; Joosen, G.; Dokonal, W.; Hirschberg, U.

2003-01-01

CAD tools are increasing their expressive and geometric power to enable a design process in which the computer model can be used throughout the whole design process for realizing the design. Such a process, in which other media such as physical scale models or drawings are no longer required by

78 FR 33456 - Self-Regulatory Organizations; Fixed Income Clearing Corporation; Notice of Filing Proposed Rule...

Science.gov (United States)

2013-06-04

... certain locked- in trade sources in the future based on volumes and processing costs. \\9\\ Designated...-Regulatory Organizations; Fixed Income Clearing Corporation; Notice of Filing Proposed Rule Change to Include trueEX LLC as a Designated Locked-In Trade Source Pursuant to the Rulebook of the Government Securities...

Promoting Changes in Children's Predictive Rules about Natural Phenomena: The Role of Computer-Based Modelling Strategies. Technical Report.

Science.gov (United States)

Frenette, Micheline

Trying to change the predictive rule for the sinking and floating phenomena, students have a great difficulty in understanding density and they are insensitive to empirical counter-examples designed to challenge their own rule. The purpose of this study is to examine the process whereby students from sixth and seventh grades relinquish their…

Imperfect Information in Software Design Processes

NARCIS (Netherlands)

Noppen, J.A.R.

2007-01-01

The process of designing high-quality software systems is one of the major issues in software engineering research. Over the years, this has resulted in numerous design methods, each with specific qualities and drawbacks. For example, the Rational Unified Process is a comprehensive design process,

PROPOSAL OF SPATIAL OPTIMIZATION OF PRODUCTION PROCESS IN PROCESS DESIGNER

Directory of Open Access Journals (Sweden)

Peter Malega

2015-03-01

Full Text Available This contribution is focused on optimizing the use of space in the production process using software Process Designer. The aim of this contribution is to suggest possible improvements to the existing layout of the selected production process. Production process was analysed in terms of inputs, outputs and course of actions. Nowadays there are many software solutions aimed at optimizing the use of space. One of these software products is the Process Designer, which belongs to the product line Tecnomatix. This software is primarily aimed at production planning. With Process Designer is possible to design the layout of production and subsequently to analyse the production or to change according to the current needs of the company.

European utility requirements: common rules to design next LWR plants in an open electricity market

International Nuclear Information System (INIS)

Berbey, Pierre; Ingemarsson, Karl-Fredrik

2004-01-01

The major European electricity producers want to keep able to build new nuclear power plants and they believe 3. generation LWRs would be the most adapted response to their needs in the first decades of this century. Producing a common European Utility Requirement (EUR) document has been one of the basic tasks towards this objective. In this common frame, standardized and competitive LWR NPPs could be developed and offered to the investors. This idea is now well supported by all the other actors on the European electricity market: vendors, regulators, grid managers, administrations although in the competitive and unified European electricity market that is emerging, the electricity producers' stakes are more and more different from the other electricity business actors'. The next term objectives of the electricity producers involved in EUR are focused on negotiating common rules of the game together with the regulators. This covers the nuclear safety approaches, the conditions requested to connect a plant to a HV grid, as well as the design standards. Discussions are going on between the EUR organization and all the corresponding bodies to develop stabilized and predictable design rules that would meet the constraints of nuclear electricity generation in this new environment. Finally there cannot be competition without competitors. The EUR organization has proven to be the right place to establish trustful relationship between the vendors and their potential customers, through fair assessment of the proposed designs performance vs. the utility needs. This will be continued and developed with the main vendors present in Europe, so as to keep alive a list of 4 to 6 designs 'qualified', i.e. showing an acceptable score of non-compliance vs. EUR. (authors)

Classifiers based on optimal decision rules

KAUST Repository

Amin, Talha

2013-11-25

Based on dynamic programming approach we design algorithms for sequential optimization of exact and approximate decision rules relative to the length and coverage [3, 4]. In this paper, we use optimal rules to construct classifiers, and study two questions: (i) which rules are better from the point of view of classification-exact or approximate; and (ii) which order of optimization gives better results of classifier work: length, length+coverage, coverage, or coverage+length. Experimental results show that, on average, classifiers based on exact rules are better than classifiers based on approximate rules, and sequential optimization (length+coverage or coverage+length) is better than the ordinary optimization (length or coverage).

Classifiers based on optimal decision rules

KAUST Repository

Amin, Talha M.; Chikalov, Igor; Moshkov, Mikhail; Zielosko, Beata

2013-01-01

Based on dynamic programming approach we design algorithms for sequential optimization of exact and approximate decision rules relative to the length and coverage [3, 4]. In this paper, we use optimal rules to construct classifiers, and study two questions: (i) which rules are better from the point of view of classification-exact or approximate; and (ii) which order of optimization gives better results of classifier work: length, length+coverage, coverage, or coverage+length. Experimental results show that, on average, classifiers based on exact rules are better than classifiers based on approximate rules, and sequential optimization (length+coverage or coverage+length) is better than the ordinary optimization (length or coverage).

A Process Algebraic Approach to Software Architecture Design

Science.gov (United States)

Aldini, Alessandro; Bernardo, Marco; Corradini, Flavio

Process algebra is a formal tool for the specification and the verification of concurrent and distributed systems. It supports compositional modeling through a set of operators able to express concepts like sequential composition, alternative composition, and parallel composition of action-based descriptions. It also supports mathematical reasoning via a two-level semantics, which formalizes the behavior of a description by means of an abstract machine obtained from the application of structural operational rules and then introduces behavioral equivalences able to relate descriptions that are syntactically different. In this chapter, we present the typical behavioral operators and operational semantic rules for a process calculus in which no notion of time, probability, or priority is associated with actions. Then, we discuss the three most studied approaches to the definition of behavioral equivalences - bisimulation, testing, and trace - and we illustrate their congruence properties, sound and complete axiomatizations, modal logic characterizations, and verification algorithms. Finally, we show how these behavioral equivalences and some of their variants are related to each other on the basis of their discriminating power.

Engineering design: A cognitive process approach

Science.gov (United States)

Strimel, Greg Joseph

The intent of this dissertation was to identify the cognitive processes used by advanced pre-engineering students to solve complex engineering design problems. Students in technology and engineering education classrooms are often taught to use an ideal engineering design process that has been generated mostly by educators and curriculum developers. However, the review of literature showed that it is unclear as to how advanced pre-engineering students cognitively navigate solving a complex and multifaceted problem from beginning to end. Additionally, it was unclear how a student thinks and acts throughout their design process and how this affects the viability of their solution. Therefore, Research Objective 1 was to identify the fundamental cognitive processes students use to design, construct, and evaluate operational solutions to engineering design problems. Research Objective 2 was to determine identifiers within student cognitive processes for monitoring aptitude to successfully design, construct, and evaluate technological solutions. Lastly, Research Objective 3 was to create a conceptual technological and engineering problem-solving model integrating student cognitive processes for the improved development of problem-solving abilities. The methodology of this study included multiple forms of data collection. The participants were first given a survey to determine their prior experience with engineering and to provide a description of the subjects being studied. The participants were then presented an engineering design challenge to solve individually. While they completed the challenge, the participants verbalized their thoughts using an established "think aloud" method. These verbalizations were captured along with participant observational recordings using point-of-view camera technology. Additionally, the participant design journals, design artifacts, solution effectiveness data, and teacher evaluations were collected for analysis to help achieve the

Exploiting deterministic maintenance opportunity windows created by conservative engineering design rules that result in free time locked into large high-speed coupled production lines with finite buffers

Directory of Open Access Journals (Sweden)

Durandt, Casper

2016-08-01

Full Text Available Conservative engineering design rules for large serial coupled production processes result in machines having locked-in free time (also called ‘critical downtime’ or ‘maintenance opportunity windows’, which cause idle time if not used. Operators are not able to assess a large production process holistically, and so may not be aware that they form the current bottleneck – or that they have free time available due to interruptions elsewhere. A real-time method is developed to accurately calculate and display free time in location and magnitude, and efficiency improvements are demonstrated in large-scale production runs.

Horizontal and Vertical Rule Bases Method in Fuzzy Controllers

Directory of Open Access Journals (Sweden)

Sadegh Aminifar

2013-01-01

Full Text Available Concept of horizontal and vertical rule bases is introduced. Using this method enables the designers to look for main behaviors of system and describes them with greater approximations. The rules which describe the system in first stage are called horizontal rule base. In the second stage, the designer modulates the obtained surface by describing needed changes on first surface for handling real behaviors of system. The rules used in the second stage are called vertical rule base. Horizontal and vertical rule bases method has a great roll in easing of extracting the optimum control surface by using too lesser rules than traditional fuzzy systems. This research involves with control of a system with high nonlinearity and in difficulty to model it with classical methods. As a case study for testing proposed method in real condition, the designed controller is applied to steaming room with uncertain data and variable parameters. A comparison between PID and traditional fuzzy counterpart and our proposed system shows that our proposed system outperforms PID and traditional fuzzy systems in point of view of number of valve switching and better surface following. The evaluations have done both with model simulation and DSP implementation.

A complex process - transforming scientific research into regulatory rules for environmental protection

International Nuclear Information System (INIS)

Yan, J.J.; Goss, D.; Huffman, A.

2002-01-01

The protection of isolated wetlands from consumptive use withdrawals has been a policy in the South Florida Water Management District (SFWMD) for over 15 years. A guideline for protecting isolated wetlands was established in the mid-1980's for the consumptive water use permitting program administered by the SFWMD. The guideline specifies groundwater drawdown criteria associated with well field pumpage. In 1994, the SFWMD convened a panel of wetland scientists to review the existing groundwater drawdown criteria. The panel concluded there was insufficient information to determine if the criteria were either too restrictive or insufficient in protecting wetlands. The panel recommended that the SFWMD conduct research to answer related questions. Since that time, staff at the SFWMD have developed a research plan, selected 38 isolated wetland monitoring sites in seven study areas, collected over four years of data, and developed an integrated surface water and groundwater simulation model. However, the staff at the SFWMD has had difficulties in transforming the research results into regulatory rules. The nature of an isolated wetland is quite complicated. Its setting changes significantly from time to time depending on the variation of rainfall, hydro-geological conditions, and human activities. A regulatory rule requires simple and more easily measurable criteria. The regulatory staff need simple tools to evaluate many permit applications within a limited time frame. The tools used in the research process are often complicated and time consuming. This paper describes the wetland research, and the difficulties of transforming research results into regulatory rules. (author)

Performance based regulation - The maintenance rule

Energy Technology Data Exchange (ETDEWEB)

Correia, Richard P. [NRR/DOTS/TQMP, U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, M/S OWFN 10A19, Washington, D.C. 20555 (United States)

1997-07-01

The U.S. Nuclear Regulatory Commission has begun a transition from 'process-oriented' to 'results-oriented' regulations. The maintenance rule is a results-oriented rule that mandates consideration of risk and plant performance. The Maintenance Rule allows licensees to devise the most effective and efficient means of achieving the results described in the rule including the use of Probabilistic Risk (or Safety) Assessments. The NRC staff conducted a series of site visits to evaluate implementation of the Rule. Conclusions from the site visits indicated that the results-oriented Maintenance Rule can be successfully implemented and enforced. (author)

Performance based regulation - The maintenance rule

International Nuclear Information System (INIS)

Correia, Richard P.

1997-01-01

The U.S. Nuclear Regulatory Commission has begun a transition from 'process-oriented' to 'results-oriented' regulations. The maintenance rule is a results-oriented rule that mandates consideration of risk and plant performance. The Maintenance Rule allows licensees to devise the most effective and efficient means of achieving the results described in the rule including the use of Probabilistic Risk (or Safety) Assessments. The NRC staff conducted a series of site visits to evaluate implementation of the Rule. Conclusions from the site visits indicated that the results-oriented Maintenance Rule can be successfully implemented and enforced. (author)

Design technology co-optimization for 14/10nm metal1 double patterning layer

Science.gov (United States)

Duan, Yingli; Su, Xiaojing; Chen, Ying; Su, Yajuan; Shao, Feng; Zhang, Recco; Lei, Junjiang; Wei, Yayi

2016-03-01

Design and technology co-optimization (DTCO) can satisfy the needs of the design, generate robust design rule, and avoid unfriendly patterns at the early stage of design to ensure a high level of manufacturability of the product by the technical capability of the present process. The DTCO methodology in this paper includes design rule translation, layout analysis, model validation, hotspots classification and design rule optimization mainly. The correlation of the DTCO and double patterning (DPT) can optimize the related design rule and generate friendlier layout which meets the requirement of the 14/10nm technology node. The experiment demonstrates the methodology of DPT-compliant DTCO which is applied to a metal1 layer from the 14/10nm node. The DTCO workflow proposed in our job is an efficient solution for optimizing the design rules for 14/10 nm tech node Metal1 layer. And the paper also discussed and did the verification about how to tune the design rule of the U-shape and L-shape structures in a DPT-aware metal layer.

Checking Flight Rules with TraceContract: Application of a Scala DSL for Trace Analysis

Science.gov (United States)

Barringer, Howard; Havelund, Klaus; Morris, Robert A.

2011-01-01

Typically during the design and development of a NASA space mission, rules and constraints are identified to help reduce reasons for failure during operations. These flight rules are usually captured in a set of indexed tables, containing rule descriptions, rationales for the rules, and other information. Flight rules can be part of manual operations procedures carried out by humans. However, they can also be automated, and either implemented as on-board monitors, or as ground based monitors that are part of a ground data system. In the case of automated flight rules, one considerable expense to be addressed for any mission is the extensive process by which system engineers express flight rules in prose, software developers translate these requirements into code, and then both experts verify that the resulting application is correct. This paper explores the potential benefits of using an internal Scala DSL for general trace analysis, named TRACECONTRACT, to write executable specifications of flight rules. TRACECONTRACT can generally be applied to analysis of for example log files or for monitoring executing systems online.

Materials in Participatory Design Processes

DEFF Research Database (Denmark)

Hansen, Nicolai Brodersen

This dissertation presents three years of academic inquiry into the question of what role materials play in interaction design and participatory design processes. The dissertation aims at developing conceptual tools, based on Deweys pragmatism, for understanding how materials aid design reflection....... It has been developed using a research-through-design approach in which the author has conducted practical design work in order to investigate and experiment with using materials to scaffold design inquiry. The results of the PhD work is submitted as seven separate papers, submitted to esteemed journals...... and conferences within the field of interaction design and HCI. The work is motivated both by the growing interest in materials in interaction design and HCI and the interest in design processes and collaboration within those fields. At the core of the dissertation lies an interest in the many different materials...

External designers in product design processes of small manufacturing firms

NARCIS (Netherlands)

Berends, Hans; Reymen, Isabelle; Stultiëns, Rutger G L; Peutz, Murk

Small manufacturing firms often fail to reap the benefits of good design practices. This study investigates how the involvement of external designers influences the evolution of product design processes in small manufacturing firms. Qualitative and quantitative process research methods were used to

Oil palm fresh fruit bunch ripeness classification based on rule- based expert system of ROI image processing technique results

International Nuclear Information System (INIS)

Alfatni, M S M; Shariff, A R M; Marhaban, M H; Shafie, S B; Saaed, O M B; Abdullah, M Z; BAmiruddin, M D

2014-01-01

There is a processing need for a fast, easy and accurate classification system for oil palm fruit ripeness. Such a system will be invaluable to farmers and plantation managers who need to sell their oil palm fresh fruit bunch (FFB) for the mill as this will avoid disputes. In this paper,a new approach was developed under the name of expert rules-based systembased on the image processing techniques results of thethree different oil palm FFB region of interests (ROIs), namely; ROI1 (300x300 pixels), ROI2 (50x50 pixels) and ROI3 (100x100 pixels). The results show that the best rule-based ROIs for statistical colour feature extraction with k-nearest neighbors (KNN) classifier at 94% were chosen as well as the ROIs that indicated results higher than the rule-based outcome, such as the ROIs of statistical colour feature extraction with artificial neural network (ANN) classifier at 94%, were selected for further FFB ripeness inspection system

Biomimetic design processes in architecture: morphogenetic and evolutionary computational design

International Nuclear Information System (INIS)

Menges, Achim

2012-01-01

Design computation has profound impact on architectural design methods. This paper explains how computational design enables the development of biomimetic design processes specific to architecture, and how they need to be significantly different from established biomimetic processes in engineering disciplines. The paper first explains the fundamental difference between computer-aided and computational design in architecture, as the understanding of this distinction is of critical importance for the research presented. Thereafter, the conceptual relation and possible transfer of principles from natural morphogenesis to design computation are introduced and the related developments of generative, feature-based, constraint-based, process-based and feedback-based computational design methods are presented. This morphogenetic design research is then related to exploratory evolutionary computation, followed by the presentation of two case studies focusing on the exemplary development of spatial envelope morphologies and urban block morphologies. (paper)

Formal analysis of design process dynamics

NARCIS (Netherlands)

Bosse, T.; Jonker, C.M.; Treur, J.

2010-01-01

This paper presents a formal analysis of design process dynamics. Such a formal analysis is a prerequisite to come to a formal theory of design and for the development of automated support for the dynamics of design processes. The analysis was geared toward the identification of dynamic design

Formal Analysis of Design Process Dynamics

NARCIS (Netherlands)

Bosse, T.; Jonker, C.M.; Treur, J.

2010-01-01

This paper presents a formal analysis of design process dynamics. Such a formal analysis is a prerequisite to come to a formal theory of design and for the development of automated support for the dynamics of design processes. The analysis was geared toward the identification of dynamic design

BICYCLE HELMET DESIGN AND THE VIRTUAL VALIDATION OF THE IMPACT, AERODYNAMICS AND PRODUCTION PROCESS

Directory of Open Access Journals (Sweden)

Bojan Boshevski

2017-12-01

Full Text Available This paper presents the development process of a bicycle helmet through individual research, creation, presentation and analysis of the results of the most important product development stages. The quality of the development and manufacturing process of the protective equipment for extreme sports is an imperative for a successful product and its flawless function. The design of the bicycle helmet is made following the rules of the design in order to create a well-founded and functional product. After creating design sketches, a virtual prototype was developed in "SolidWorks" using the required ergonomic dimensions. 3D printed model of the human head with adapted ergonomic dimensions and the designed bicycle helmet was developed in order to verify the applied ergonomic measures. The virtual model will be used as an input in the finite element analysis of the helmet impact test based on the EN1078 standard and the aerodynamic simulations executed in "SolidWorks Simulation and Flow Simulation", for verification of the impact and aerodynamic properties. Virtual testing of aerodynamic features and the ability of the bicycle helmet to allow ventilation of the user's head indicate that the helmet performs its function in the desired way. Also, the virtual prototype will be used for the production process simulation in "SolidWorks Plastics" in order to analyze the production of the bicycle helmet. The polycarbonate helmet outer shell is subject to a number of simulations for the sake of analyzing the production process in order to obtain the desired characteristics of the polycarbonate outer shell and to avoid the disadvantages that occur in the manufacturing process. The main goal of this paper is to develop a safety bicycle helmet with improved ergonomic, validation of impact, aerodynamic characteristics and production process in order to produce a high quality product for mass use.

Business rules management principles in the Dutch governmental context

NARCIS (Netherlands)

dr. Martijn Zoet; Koen Smit

2016-01-01

From the article: Abstract Since more and more business rules management solutions are utilized, organizations search for guidance to design such solutions. Principles are often applied to guide the design of information systems in general. Scientific research on principles for business rules

Model-based Systems Engineering: Creation and Implementation of Model Validation Rules for MOS 2.0

Science.gov (United States)

Schmidt, Conrad K.

2013-01-01

Model-based Systems Engineering (MBSE) is an emerging modeling application that is used to enhance the system development process. MBSE allows for the centralization of project and system information that would otherwise be stored in extraneous locations, yielding better communication, expedited document generation and increased knowledge capture. Based on MBSE concepts and the employment of the Systems Modeling Language (SysML), extremely large and complex systems can be modeled from conceptual design through all system lifecycles. The Operations Revitalization Initiative (OpsRev) seeks to leverage MBSE to modernize the aging Advanced Multi-Mission Operations Systems (AMMOS) into the Mission Operations System 2.0 (MOS 2.0). The MOS 2.0 will be delivered in a series of conceptual and design models and documents built using the modeling tool MagicDraw. To ensure model completeness and cohesiveness, it is imperative that the MOS 2.0 models adhere to the specifications, patterns and profiles of the Mission Service Architecture Framework, thus leading to the use of validation rules. This paper outlines the process by which validation rules are identified, designed, implemented and tested. Ultimately, these rules provide the ability to maintain model correctness and synchronization in a simple, quick and effective manner, thus allowing the continuation of project and system progress.

Implementing The Safeguards-By-Design Process

International Nuclear Information System (INIS)

Whitaker, J. Michael; McGinnis, Brent; Laughter, Mark D.; Morgan, Jim; Bjornard, Trond; Bean, Robert; Durst, Phillip; Hockert, John; DeMuth, Scott; Lockwood, Dunbar

2010-01-01

The Safeguards-by-Design (SBD) approach incorporates safeguards into the design and construction of nuclear facilities at the very beginning of the design process. It is a systematic and structured approach for fully integrating international and national safeguards for material control and accountability (MC and A), physical protection, and other proliferation barriers into the design and construction process for nuclear facilities. Implementing SBD is primarily a project management or project coordination challenge. This paper focuses specifically on the design process; the planning, definition, organization, coordination, scheduling and interaction of the safeguards experts and stakeholders as they participate in the design and construction of a nuclear facility. It delineates the steps in a nuclear facility design and construction project in order to provide the project context within which the safeguards design activities take place, describes the involvement of the safeguards experts in the design process, the nature of their analyses, interactions and decisions, and describes the documents created and how they are used. This report highlights the project context of safeguards activities, and identifies the safeguards community (nuclear facility operator, designer/builder, state regulator, SSAC and IAEA) must accomplish in order to implement SBD within the project.

Initial design process of the repository

International Nuclear Information System (INIS)

Osmanlioglu, A.E.

2001-01-01

The concept of the final disposal of high level wastes is to isolate the waste from the biosphere for extremely long periods of time by emplacement of wastes into deep stable geological formations. Several geological formations have been considered as candidate host environments for high level waste disposal and several techniques have been developed for repository design. In this study, interrelationships of main parameters of a general repository design have been defined and effective parameters are shown at each step. Initial design process is based on the long term stability of underground openings as disposal galleries. For this reason, this design process includes two main analyses: mechanical analysis and thermal analysis. Each of the analysis systems is directly related to each other by technical precautions. As a result of this design process, general information about the acceptable depth of the repository, layout and emplacement pattern can be taken. Final design study can be established on the result of initial design process. (author)

Conceptual Chemical Process Design for Sustainability.

Science.gov (United States)

This chapter examines the sustainable design of chemical processes, with a focus on conceptual design, hierarchical and short-cut methods, and analyses of process sustainability for alternatives. The chapter describes a methodology for incorporating process sustainability analyse...

Practicing universal design to actual hand tool design process.

Science.gov (United States)

Lin, Kai-Chieh; Wu, Chih-Fu

2015-09-01

UD evaluation principles are difficult to implement in product design. This study proposes a methodology for implementing UD in the design process through user participation. The original UD principles and user experience are used to develop the evaluation items. Difference of product types was considered. Factor analysis and Quantification theory type I were used to eliminate considered inappropriate evaluation items and to examine the relationship between evaluation items and product design factors. Product design specifications were established for verification. The results showed that converting user evaluation into crucial design verification factors by the generalized evaluation scale based on product attributes as well as the design factors applications in product design can improve users' UD evaluation. The design process of this study is expected to contribute to user-centered UD application. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Process Variations and Probabilistic Integrated Circuit Design

CERN Document Server

Haase, Joachim

2012-01-01

Uncertainty in key parameters within a chip and between different chips in the deep sub micron era plays a more and more important role. As a result, manufacturing process spreads need to be considered during the design process.  Quantitative methodology is needed to ensure faultless functionality, despite existing process variations within given bounds, during product development.   This book presents the technological, physical, and mathematical fundamentals for a design paradigm shift, from a deterministic process to a probability-orientated design process for microelectronic circuits.  Readers will learn to evaluate the different sources of variations in the design flow in order to establish different design variants, while applying appropriate methods and tools to evaluate and optimize their design.  Trains IC designers to recognize problems caused by parameter variations during manufacturing and to choose the best methods available to mitigate these issues during the design process; Offers both qual...

Sensitivity study on heuristic rules applied to the neutronic optimization of cells for BWR

International Nuclear Information System (INIS)

Gonzalez C, J.; Martin del Campo M, C.; Francois L, J.L.

2004-01-01

The objective of this work is to verify the validity of the heuristic rules that have been applied in the processes of radial optimization of fuel cells. It was examined the rule with respect to the accommodation of fuel in the corners of the cell and it became special attention on the influence of the position and concentration of those pellets with gadolinium in the reactivity of the cell and the safety parameters. The evaluation behaved on designed cells violating the heuristic rules. For both cases the cells were analyzed between infinite using the HELIOS code. Additionally, for the second case, it was behaved a stage more exhaustive where it was used one of the studied cells that it completed those safety parameters and of reactivity to generate the design of an assemble that was used to calculate with CM-PRESTO the behavior of the nucleus during three operation cycles. (Author)

Improving the anesthetic process by a fuzzy rule based medical decision system.

Science.gov (United States)

Mendez, Juan Albino; Leon, Ana; Marrero, Ayoze; Gonzalez-Cava, Jose M; Reboso, Jose Antonio; Estevez, Jose Ignacio; Gomez-Gonzalez, José F

2018-01-01

The main objective of this research is the design and implementation of a new fuzzy logic tool for automatic drug delivery in patients undergoing general anesthesia. The aim is to adjust the drug dose to the real patient needs using heuristic knowledge provided by clinicians. A two-level computer decision system is proposed. The idea is to release the clinician from routine tasks so that he can focus on other variables of the patient. The controller uses the Bispectral Index (BIS) to assess the hypnotic state of the patient. Fuzzy controller was included in a closed-loop system to reach the BIS target and reject disturbances. BIS was measured using a BIS VISTA monitor, a device capable of calculating the hypnosis level of the patient through EEG information. An infusion pump with propofol 1% is used to supply the drug to the patient. The inputs to the fuzzy inference system are BIS error and BIS rate. The output is infusion rate increment. The mapping of the input information and the appropriate output is given by a rule-base based on knowledge of clinicians. To evaluate the performance of the fuzzy closed-loop system proposed, an observational study was carried out. Eighty one patients scheduled for ambulatory surgery were randomly distributed in 2 groups: one group using a fuzzy logic based closed-loop system (FCL) to automate the administration of propofol (42 cases); the second group using manual delivering of the drug (39 cases). In both groups, the BIS target was 50. The FCL, designed with intuitive logic rules based on the clinician experience, performed satisfactorily and outperformed the manual administration in patients in terms of accuracy through the maintenance stage. Copyright © 2018 Elsevier B.V. All rights reserved.

Atomic Energy (factories) rules: 1988

International Nuclear Information System (INIS)

1988-01-01

These rules are made by the Central Government under the Factories Act, 1948 and extend to all factories engaged in carrying out the purposes of the Atomic Energy Act, 1962. The rules cover the requirements of inspecting staff, health aspects, personnel safety, personnel welfare, working hours, employment of young persons, special provisions in case of dangerous manufacturing processes or operations, supplemental rules for administrative aspects and special powers of competent authority. (M.G.B.)

Fusion reactor design studies: standard unit costs and cost scaling rules

International Nuclear Information System (INIS)

Schulte, S.C.; Bickford, W.E.; Willingham, C.E.; Ghose, S.K.; Walker, M.G.

1979-09-01

This report establishes standard unit costs and scaling rules for estimating costs of material, equipment, land, and labor components used in magnetic confinement fusion reactor plant construction and operation. Use of the standard unit costs and scaling rules will add uniformity to cost estimates, and thus allow valid comparison of the economic characteristics of various reactor concepts

Ergonomics approaches to sociotechnical design processes

DEFF Research Database (Denmark)

Broberg, Ole

2003-01-01

A five-year design process of a continuous process wok has been studied with the aim of elucidating the conditions for integrating work environment aspects. The design process was seen as a network building activity and as a social shaping process of the artefact. A work environment log is sugges...

Streamling the Change Management with Business Rules

Science.gov (United States)

Savela, Christopher

2015-01-01

Will discuss how their organization is trying to streamline workflows and the change management process with business rules. In looking for ways to make things more efficient and save money one way is to reduce the work the workflow task approvers have to do when reviewing affected items. Will share the technical details of the business rules, how to implement them, how to speed up the development process by using the API to demonstrate the rules in action.

A design method for process design kit based on an SMIC 65 nm process

International Nuclear Information System (INIS)

Luo Haiyan; Chen Lan; Yin Minghui

2010-01-01

The frame structure of a process design kit (PDK) is described in detail, and a practical design method for PDK is presented. Based on this method, a useful SMIC 65 nm PDK has been successfully designed and realized, which is applicable to native EDA software of Zeni. The design process and difficulties of PDK are introduced by developing and analyzing these parameterized cell (Pcell) devices (MOS, resistor, etc.). A structured design method was proposed to implement Pcell, which makes thousands upon thousands of source codes of Pcell concise, readable, easy-to-upkeep and transplantable. Moreover, a Pcase library for each Pcell is designed to verify the Pcell in batches. By this approach, the Pcell can be verified efficiently and the PDK will be more reliable and steady. In addition, the component description format parameters and layouts of the Pcell are optimized by adding flexibility and improving performance, which benefits analog and custom IC designers to satisfy the demand of design. Finally, the SMIC 65 nm PDK was applied to IC design. The results indicate that the SMIC 65 nm PDK is competent to support IC design. (semiconductor integrated circuits)

Critical Evaluation of Validation Rules Automated Extraction from Data

Directory of Open Access Journals (Sweden)

David Pejcoch

2014-10-01

Full Text Available The goal of this article is to critically evaluate a possibility of automatic extraction of such kind of rules which could be later used within a Data Quality Management process for validation of records newly incoming to Information System. For practical demonstration the 4FT-Miner procedure implemented in LISpMiner System was chosen. A motivation for this task is the potential simplification of projects focused on Data Quality Management. Initially, this article is going to critically evaluate a possibility of fully automated extraction with the aim to identify strengths and weaknesses of this approach in comparison to its alternative, when at least some a priori knowledge is available. As a result of practical implementation, this article provides design of recommended process which would be used as a guideline for future projects. Also the question of how to store and maintain extracted rules and how to integrate them with existing tools supporting Data Quality Management is discussed

A test of a design process scale

NARCIS (Netherlands)

Marinakis, Yorgos; Harms, Rainer; Walsh, Steven Thomas

2015-01-01

Design is a type of innovation that focuses on creating new product and service meanings. Models of the design process are important because they can help firms manage their product and service design processes to obtain competitive advantage. Empirically-based models of the design process are

Designing rules and probabilistic weighting for fast materials discovery in the Perovskite structure

DEFF Research Database (Denmark)

Castelli, Ivano Eligio; Jacobsen, Karsten Wedel

2014-01-01

High-throughput electronic-structure calculations are becoming increasingly popular in materials science and in the design of new compounds. Electronic-structure theory, for example, in the form of density-functional theory, can be used to calculate stabilities and electronic properties as bandgaps...... of new compounds. However, in practice, the methods are often limited to rather small atomic-scale systems or periodic crystals with only a limited number of atoms in the unit cell. It is therefore of interest to be able to derive generally useful information from simple systems to be applied in other...... and layered perovskite structure, respectively. These rules allow a saving in computer time of around 80%....

The formal logic of business rules

Directory of Open Access Journals (Sweden)

Ivana Rábová

2007-01-01

Full Text Available Identification of improvement areas and utilization of information and communication technologies have gained value and priority in our knowledge driven society. Rules define constraints, conditions and policies of how the business processes are to be performed but they also affect the behavior of the resource and facilitate strategic business goals achieving. They control the business and represent business knowledge. The research works about business rules show how to specify and classify business rules from the business perspective and to establish an approach to managing them that will enable faster change in business processes and other business concepts in all areas of the business. In concrete this paper deals with four approaches to business rules formalization, i. e. notation of OCL, inference rules, decision table and predicate logic and with their general evaluation. The article shows also the advantages and disadvantages of these approaches of formalization. They are the example of every mentioned approach.

Dependency Grammar in Lithuanian Language Processing

OpenAIRE

Grigonytė, Gintarė

2006-01-01

Lithuanian language is quite in an early stage of language processing. And therefore has a high demand on automated tools like taggers, parsers, word sense disambiguators etc. During the last 10 years only a few researchers were attempting to create a parser for Lithuanian language. However none of them are used in practices nowadays. The process of designing and implementing rule based parser for Lithuanian language is presented in this paper. Rules and constraints of the formal grammar foll...

Designing for Communities

CERN Multimedia

CERN. Geneva

2011-01-01

In 2008, Mark Boulton's small design firm won the project to redesign drupal.org home to the Drupal open source content management project and its community of over 400,000 users and developers. Designing for open source communities has its challenges: it is a developer-centric environment where discussion, debate and consensus rules and where design processes are often viewed sceptically. To help dispel some misconceptions behind the design process, Mark's team worked completely openly with the Drupal community - and broader the web design community - throughout the project. This talk will walk through some of the challenges and solutions for designing for large communities. Mark will share the successes - and the horror stories - of how a traditional design process was challenged every step of the way and how the Drupal community became an integral part of that new process. Mark and his team will be working with the Communication Group on an open project to r...

Comparative EMP design practices

International Nuclear Information System (INIS)

Martin, L.C.

1975-01-01

A large amount of effort is devoted to the hardening of systems against various effects. The nuclear electromagnetic pulse (EMP) creates potentially severe protection problems in hardening against electromagnetic effects. Each hardening effort is usually supported through development or application of sets of rules, practices, constraints, etc., which aid in decision-making throughout the design process. Several excerpts from a few sets of EMP design rules and practices taken from relatively independent sources are presented for comparison of essential features and mode of expression. A general objective is to clarify some of the EMP practices present in general EMC work and to encourage further interchange of relevant information. (auth)

Teaching Process Design through Integrated Process Synthesis

Science.gov (United States)

Metzger, Matthew J.; Glasser, Benjamin J.; Patel, Bilal; Hildebrandt, Diane; Glasser, David

2012-01-01

The design course is an integral part of chemical engineering education. A novel approach to the design course was recently introduced at the University of the Witwatersrand, Johannesburg, South Africa. The course aimed to introduce students to systematic tools and techniques for setting and evaluating performance targets for processes, as well as…

Information-Processing Models and Curriculum Design

Science.gov (United States)

Calfee, Robert C.

1970-01-01

"This paper consists of three sections--(a) the relation of theoretical analyses of learning to curriculum design, (b) the role of information-processing models in analyses of learning processes, and (c) selected examples of the application of information-processing models to curriculum design problems." (Author)

Heuristic rules analysis on the fuel cells design using greedy search;Analisis de reglas heuristicas en el diseno de celdas de combustible usando busqueda greedy

Energy Technology Data Exchange (ETDEWEB)

Ortiz, J. J.; Castillo, J. A.; Montes, J. L.; Hernandez, J. L., E-mail: juanjose.ortiz@inin.gob.m [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

2009-10-15

This work approaches the study of one of the heuristic rules of fuel cells design for boiling water nuclear reactors. This rule requires that the minor uranium enrichment is placed in the corners of the fuel cell. Also the search greedy is applied for the fuel cells design where explicitly does not take in count this rule, allowing the possibility to place any uranium enrichment with the condition that it does not contain gadolinium. Results are shown in the quality of the obtained cell by search greedy when it considers the rule and when not. The cell quality is measured with the value of the power pick factor obtained, as well as of the neutrons multiplication factor in an infinite medium. Cells were analyzed with 1 and 2 gadolinium concentrations low operation conditions at 120% of the nominal power of the reactors of the nuclear power plant of Laguna Verde. The results show that not to consider the rule in cells with a single gadolinium concentration, it has as repercussion that the greedy search has a minor performance. On the other hand with cells of two gadolinium concentrations, the performance of the greedy search was better. (Author)

Artificial intelligence in process design and operation

International Nuclear Information System (INIS)

Sudduth, A.L.

1988-01-01

Artificial Intelligence (AI) has recently become prominent in the discussion of computer applications in the utility business. In order to assess this technology, a research project was performed to determine whether software development techniques based on AI could be used to facilitate management of information associated with the design of a generating station. The approach taken was the development of an expert system, using a relatively simple set of rules acting on a more complex knowledge base. A successful prototype for the application was developed and its potential extension to a production environment demonstrated. During the course of prototype development, other possible applications of AI in design engineering were discovered, and areas of particular interest selected for further investigation. A plan for AI R and D was formulated. That plan and other possible future work in AI are discussed

Process heat transfer principles, applications and rules of thumb

CERN Document Server

Serth, Robert W

2014-01-01

Process Heat Transfer is a reference on the design and implementation of industrial heat exchangers. It provides the background needed to understand and master the commercial software packages used by professional engineers in the design and analysis of heat exchangers. This book focuses on types of heat exchangers most widely used by industry: shell-and-tube exchangers (including condensers, reboilers and vaporizers), air-cooled heat exchangers and double-pipe (hairpin) exchangers. It provides a substantial introduction to the design of heat exchanger networks using pinch technology, the mos

Rationale, design, and implementation protocol of an electronic health record integrated clinical prediction rule (iCPR randomized trial in primary care

Directory of Open Access Journals (Sweden)

Wisnivesky Juan

2011-09-01

Full Text Available Abstract Background Clinical prediction rules (CPRs represent well-validated but underutilized evidence-based medicine tools at the point-of-care. To date, an inability to integrate these rules into an electronic health record (EHR has been a major limitation and we are not aware of a study demonstrating the use of CPR's in an ambulatory EHR setting. The integrated clinical prediction rule (iCPR trial integrates two CPR's in an EHR and assesses both the usability and the effect on evidence-based practice in the primary care setting. Methods A multi-disciplinary design team was assembled to develop a prototype iCPR for validated streptococcal pharyngitis and bacterial pneumonia CPRs. The iCPR tool was built as an active Clinical Decision Support (CDS tool that can be triggered by user action during typical workflow. Using the EHR CDS toolkit, the iCPR risk score calculator was linked to tailored ordered sets, documentation, and patient instructions. The team subsequently conducted two levels of 'real world' usability testing with eight providers per group. Usability data were used to refine and create a production tool. Participating primary care providers (n = 149 were randomized and intervention providers were trained in the use of the new iCPR tool. Rates of iCPR tool triggering in the intervention and control (simulated groups are monitored and subsequent use of the various components of the iCPR tool among intervention encounters is also tracked. The primary outcome is the difference in antibiotic prescribing rates (strep and pneumonia iCPR's encounters and chest x-rays (pneumonia iCPR only between intervention and control providers. Discussion Using iterative usability testing and development paired with provider training, the iCPR CDS tool leverages user-centered design principles to overcome pervasive underutilization of EBM and support evidence-based practice at the point-of-care. The ongoing trial will determine if this collaborative

A rule-based approach for process discovery : Dealing with noise and imbalance in process logs

NARCIS (Netherlands)

Maruster, L; Weijters, AJMM; Van der Aalst, WMP; Bosch, Antal van den

Effective information systems require the existence of explicit process models. A completely specified process design needs to be developed in order to enact a given business process. This development is time consuming and often subjective and incomplete. We propose a method that constructs the

A rule-based approach for process discovery: dealing with noise and imbalance in process logs

NARCIS (Netherlands)

Maruster, L.; Weijters, A.J.M.M.; Aalst, van der W.M.P.; Bosch, van den A.P.J.

2006-01-01

Effective information systems require the existence of explicit process models. A completely specified process design needs to be developed in order to enact a given business process. This development is time consuming and often subjective and incomplete. We propose a method that constructs the

Facilitating Teamwork in the Design Process

DEFF Research Database (Denmark)

Bang, Anne Louise; Nissen, Kirsten

2009-01-01

By approaching the Repertory Grid as an exploratory design game and drawing on insight in diagrammatic reasoning we argue that this approach is useful in supporting team work in the design process. In this paper we draw on two courses inviting textile design students to contribute to the developm......By approaching the Repertory Grid as an exploratory design game and drawing on insight in diagrammatic reasoning we argue that this approach is useful in supporting team work in the design process. In this paper we draw on two courses inviting textile design students to contribute...

Rules of performance in the nursing home: A grounded theory of nurse-CNA communication.

Science.gov (United States)

Madden, Connie; Clayton, Margaret; Canary, Heather E; Towsley, Gail; Cloyes, Kristin; Lund, Dale

This study offers an initial theoretical understanding of nurse-CNA communication processes from the perspectives of nurses and CNAs who are providing direct care to residents in nursing homes. A grounded theory approach provided an understanding of nurse-CNA communication process within the complexities of the nursing home setting. Four themes (maintaining information flow, following procedure, fostering collegiality, and showing respect) describe the "rules of performance" that intertwine in nuanced relationships to guide nurse-CNA communication processes. Understanding how these rules of performance guide nurse-CNA communication processes, and how they are positively and negatively influenced, suggests that nurse-CNA communication during direct care of nursing home residents could be improved through policy and education that is specifically designed to be relevant and applicable to direct care providers in the nursing home environment. Copyright © 2016 Elsevier Inc. All rights reserved.

Integrating ergonomic knowledge into engineering design processes

DEFF Research Database (Denmark)

Hall-Andersen, Lene Bjerg

Integrating ergonomic knowledge into engineering design processes has been shown to contribute to healthy and effective designs of workplaces. However, it is also well-recognized that, in practice, ergonomists often have difficulties gaining access to and impacting engineering design processes...... employed in the same company, constituted a supporting factor for the possibilities to integrate ergonomic knowledge into the engineering design processes. However, the integration activities remained discrete and only happened in some of the design projects. A major barrier was related to the business...... to the ergonomic ambitions of the clients. The ergonomists’ ability to navigate, act strategically, and compromise on ergonomic inputs is also important in relation to having an impact in the engineering design processes. Familiarity with the engineering design terminology and the setup of design projects seems...

Autonomous Rule Creation for Intrusion Detection

Energy Technology Data Exchange (ETDEWEB)

Todd Vollmer; Jim Alves-Foss; Milos Manic

2011-04-01

Many computational intelligence techniques for anomaly based network intrusion detection can be found in literature. Translating a newly discovered intrusion recognition criteria into a distributable rule can be a human intensive effort. This paper explores a multi-modal genetic algorithm solution for autonomous rule creation. This algorithm focuses on the process of creating rules once an intrusion has been identified, rather than the evolution of rules to provide a solution for intrusion detection. The algorithm was demonstrated on anomalous ICMP network packets (input) and Snort rules (output of the algorithm). Output rules were sorted according to a fitness value and any duplicates were removed. The experimental results on ten test cases demonstrated a 100 percent rule alert rate. Out of 33,804 test packets 3 produced false positives. Each test case produced a minimum of three rule variations that could be used as candidates for a production system.

76 FR 10781 - Amendments to Adjudicatory Process Rules and Related Requirements

Science.gov (United States)

2011-02-28

... Commission noted that ``it would be a rare case where we would excuse a non-timely petition absent good cause...: Public comments and supporting materials related to this proposed rule can be found at http://www... effective date of the final rule (e.g., a presiding officer order in response to a petition or motion), nor...

Patients' feelings about ward nursing regimes and involvement in rule construction.

Science.gov (United States)

Alexander, J

2006-10-01

This study compared two acute psychiatric ward nursing regimes, focusing on ward rules as a means of investigating the relationship between the flexibility/inflexibility of the regimes and patient outcomes. Previous studies identified an association between ward rules and patient aggression. A link between absconding and nurses' attitudes towards rule enforcement has also been explored. However, an in-depth exploration of ward rules from the perspective of nurses and patients had not been undertaken previously. The study aimed to discover the content of rules within acute psychiatric wards; to explore patients' responses to the rules; to evaluate the impact of rules and rule enforcement on nurse-patient relationships and on ward events; and to investigate the relationship between ward rules, ward atmosphere and ward design. The relevance of sociological theory emerged from the data analysis. During this process, the results were moved up to another conceptual level to represent the meaning of lived experience at the level of theory. For example, nurses' descriptions of their feelings in relation to rule enforcement were merged as role ambivalence. This concept was supported by examples from the transcripts. Other possible explanations for the data and the connections between them were checked by returning to each text unit in the cluster and ensuring that it fitted with the emergent theory. The design centred on a comparative interview study of 30 patients and 30 nurses within two acute psychiatric wards in different hospitals. Non-participant observations provided a context for the interview data. Measures of the Ward Atmosphere Scale, the Hospital-Hostel Practices Profile, ward incidents and levels of as required (PRN) medication were obtained. The analysis of the quantitative data was assisted by spss, and the qualitative analysis by QSR *NUDIST. Thematic and interpretative phenomenological methods were used in the analysis of the qualitative data. A series of

Evolving fuzzy rules for relaxed-criteria negotiation.

Science.gov (United States)

Sim, Kwang Mong

2008-12-01

In the literature on automated negotiation, very few negotiation agents are designed with the flexibility to slightly relax their negotiation criteria to reach a consensus more rapidly and with more certainty. Furthermore, these relaxed-criteria negotiation agents were not equipped with the ability to enhance their performance by learning and evolving their relaxed-criteria negotiation rules. The impetus of this work is designing market-driven negotiation agents (MDAs) that not only have the flexibility of relaxing bargaining criteria using fuzzy rules, but can also evolve their structures by learning new relaxed-criteria fuzzy rules to improve their negotiation outcomes as they participate in negotiations in more e-markets. To this end, an evolutionary algorithm for adapting and evolving relaxed-criteria fuzzy rules was developed. Implementing the idea in a testbed, two kinds of experiments for evaluating and comparing EvEMDAs (MDAs with relaxed-criteria rules that are evolved using the evolutionary algorithm) and EMDAs (MDAs with relaxed-criteria rules that are manually constructed) were carried out through stochastic simulations. Empirical results show that: 1) EvEMDAs generally outperformed EMDAs in different types of e-markets and 2) the negotiation outcomes of EvEMDAs generally improved as they negotiated in more e-markets.

Design rules and reality check for carbon-based ultracapacitors

Science.gov (United States)

Eisenmann, Erhard T.

1995-04-01

Design criteria for carbon-based Ultracapacitors have been determined for specified energy and power requirements, using the geometry of the components and such material properties as density, porosity and conductivity as parameters, while also considering chemical compatibility. This analysis shows that the weights of active and inactive components of the capacitor structure must be carefully balanced for maximum energy and power density. When applied to nonaqueous electrolytes, the design rules for a 5 Wh/kg device call for porous carbon with a specific capacitance of about 30 F/cu cm. This performance is not achievable with pure, electrostatic double layer capacitance. Double layer capacitance is only 5 to 30% of that observed in aqueous electrolyte. Tests also showed that nonaqueous electrolytes have a diminished capability to access micropores in activated carbon, in one case yielding a capacitance of less than 1 F/cu cm for carbon that had 100 F/cu cm in aqueous electrolyte. With negative results on nonaqueous electrolytes dominating the present study, the obvious conclusion is to concentrate on aqueous systems. Only aqueous double layer capacitors offer adequate electrostatic charging characteristics which is the basis for high power performance. There arc many opportunities for further advancing aqueous double layer capacitors, one being the use of highly activated carbon films, as opposed to powders, fibers and foams. While the manufacture of carbon films is still costly, and while the energy and power density of the resulting devices may not meet the optimistic goals that have been proposed, this technology could produce true double layer capacitors with significantly improved performance and large commercial potential.

An Integrated Design Process

DEFF Research Database (Denmark)

Petersen, Mads Dines; Knudstrup, Mary-Ann

2010-01-01

Present paper is placed in the discussion about how sustainable measures are integrated in the design process by architectural offices. It presents results from interviews with four leading Danish architectural offices working with sustainable architecture and their experiences with it, as well...... as the requirements they meet in terms of how to approach the design process – especially focused on the early stages like a competition. The interviews focus on their experiences with working in multidisciplinary teams and using digital tools to support their work with sustainable issues. The interviews show...... the environmental measures cannot be discarded due to extra costs....

Conceptual Design of Industrial Process Displays

DEFF Research Database (Denmark)

Pedersen, C.R.; Lind, Morten

1999-01-01

discusses aspects of process display design taking into account both the designer's and the operator's points of view. Three aspects are emphasized: the operator tasks, the display content and the display form. The distinction between these three aspects is the basis for proposing an outline for a display......Today, process displays used in industry are often designed on the basis of piping and instrumentation diagrams without any method of ensuring that the needs of the operators are fulfilled. Therefore, a method for a systematic approach to the design of process displays is needed. This paper...... by a simple example from a plant with batch processes. Later the method is applied to develop a supervisory display for a condenser system in a nuclear power plant. The differences between the continuous plant domain of power production and the batch processes from the example are analysed and broad...

Integrating Thermal Tools Into the Mechanical Design Process

Science.gov (United States)

Tsuyuki, Glenn T.; Siebes, Georg; Novak, Keith S.; Kinsella, Gary M.

1999-01-01

The intent of mechanical design is to deliver a hardware product that meets or exceeds customer expectations, while reducing cycle time and cost. To this end, an integrated mechanical design process enables the idea of parallel development (concurrent engineering). This represents a shift from the traditional mechanical design process. With such a concurrent process, there are significant issues that have to be identified and addressed before re-engineering the mechanical design process to facilitate concurrent engineering. These issues also assist in the integration and re-engineering of the thermal design sub-process since it resides within the entire mechanical design process. With these issues in mind, a thermal design sub-process can be re-defined in a manner that has a higher probability of acceptance, thus enabling an integrated mechanical design process. However, the actual implementation is not always problem-free. Experience in applying the thermal design sub-process to actual situations provides the evidence for improvement, but more importantly, for judging the viability and feasibility of the sub-process.

A computer-aided approach for achieving sustainable process design by process intensification

DEFF Research Database (Denmark)

Anantasarn, Nateetorn; Suriyapraphadilok, Uthaiporn; Babi, Deenesh Kavi

2017-01-01

to generate flowsheet alternatives that satisfy the design targets thereby, minimizing and/or eliminating the process hot-spots. The application of the framework is highlighted through the production of para-xylene via toluene methylation where more sustainable flowsheet alternatives that consist of hybrid......Process intensification can be applied to achieve sustainable process design. In this paper, a systematic, 3-stage synthesis-intensification framework is applied to achieve more sustainable design. In stage 1, the synthesis stage, an objective function and design constraints are defined and a base...... case is synthesized. In stage 2, the design and analysis stage, the base case is analyzed using economic and environmental analyses to identify process hot-spots that are translated into design targets. In stage 3, the innovation design stage, phenomena-based process intensification is performed...

A unified approach to the design of advanced proportional-integral-derivative controllers for time-delay processes

Energy Technology Data Exchange (ETDEWEB)

Lee, Moonyong [Yeungnam University, Gyeongsan (Korea, Republic of); Vu, Truong Nguyen Luan [University of Technical Education of Ho Chi Minh City, Ho Chi Minh (China)

2013-03-15

A unified approach for the design of proportional-integral-derivative (PID) controllers cascaded with first-order lead-lag filters is proposed for various time-delay processes. The proposed controller’s tuning rules are directly derived using the Padé approximation on the basis of internal model control (IMC) for enhanced stability against disturbances. A two-degrees-of-freedom (2DOF) control scheme is employed to cope with both regulatory and servo problems. Simulation is conducted for a broad range of stable, integrating, and unstable processes with time delays. Each simulated controller is tuned to have the same degree of robustness in terms of maximum sensitivity (Ms). The results demonstrate that the proposed controller provides superior disturbance rejection and set-point tracking when compared with recently published PID-type controllers. Controllers’ robustness is investigated through the simultaneous introduction of perturbation uncertainties to all process parameters to obtain worst-case process-model mismatch. The process-model mismatch simulation results demonstrate that the proposed method consistently affords superior robustness.

POSSIBILITIES OF APPLICATION OF THE HACCP SYSTEM RULES IN THE PROCESS OF IMPROVING THE QUALITY OF EDUCATION IN AGRICULTURAL SECONDARY SCHOOLS

Directory of Open Access Journals (Sweden)

Maria Kaczmarek

2014-09-01

Full Text Available The paper presents theoretical issues concerning the possibilities of application of the HACCP system rules in the process of improving the quality of education in secondary schools. The carried out analysis show that it is possible to apply the HACCP system rules in secondary schools. Implementation of the HACCP system rules in schools can be beneficial in four areas: economically-financial, organisational, educational and social. Moreover, the education security would increase, the intellectual loss and failure of students would be diminished and on the educational market an increase of competitiveness and trust to school and its graduates would be observed.

An Efficient Compiler for Weighted Rewrite Rules

OpenAIRE

Mohri, Mehryar; Sproat, Richard

1996-01-01

Context-dependent rewrite rules are used in many areas of natural language and speech processing. Work in computational phonology has demonstrated that, given certain conditions, such rewrite rules can be represented as finite-state transducers (FSTs). We describe a new algorithm for compiling rewrite rules into FSTs. We show the algorithm to be simpler and more efficient than existing algorithms. Further, many of our applications demand the ability to compile weighted rules into weighted FST...

FUZZY MODELING BY SUCCESSIVE ESTIMATION OF RULES ...

African Journals Online (AJOL)

This paper presents an algorithm for automatically deriving fuzzy rules directly from a set of input-output data of a process for the purpose of modeling. The rules are extracted by a method termed successive estimation. This method is used to generate a model without truncating the number of fired rules, to within user ...

Hybrid tree-rule firewall for high speed data transmission

NARCIS (Netherlands)

Chomsiri, Thawatchai; He, Xiangjian; Nanda, Priyadarsi; Tan, Zhiyuan

2017-01-01

Traditional firewalls employ listed rules in both configuration and process phases to regulate network traffic. However, configuring a firewall with listed rules may create rule conflicts, and slows down the firewall. To overcome this problem, we have proposed a Tree-rule firewall in our previous

Human Integration Design Processes (HIDP)

Science.gov (United States)

Boyer, Jennifer

2014-01-01

The purpose of the Human Integration Design Processes (HIDP) document is to provide human-systems integration design processes, including methodologies and best practices that NASA has used to meet human systems and human rating requirements for developing crewed spacecraft. HIDP content is framed around human-centered design methodologies and processes in support of human-system integration requirements and human rating. NASA-STD-3001, Space Flight Human-System Standard, is a two-volume set of National Aeronautics and Space Administration (NASA) Agency-level standards established by the Office of the Chief Health and Medical Officer, directed at minimizing health and performance risks for flight crews in human space flight programs. Volume 1 of NASA-STD-3001, Crew Health, sets standards for fitness for duty, space flight permissible exposure limits, permissible outcome limits, levels of medical care, medical diagnosis, intervention, treatment and care, and countermeasures. Volume 2 of NASASTD- 3001, Human Factors, Habitability, and Environmental Health, focuses on human physical and cognitive capabilities and limitations and defines standards for spacecraft (including orbiters, habitats, and suits), internal environments, facilities, payloads, and related equipment, hardware, and software with which the crew interfaces during space operations. The NASA Procedural Requirements (NPR) 8705.2B, Human-Rating Requirements for Space Systems, specifies the Agency's human-rating processes, procedures, and requirements. The HIDP was written to share NASA's knowledge of processes directed toward achieving human certification of a spacecraft through implementation of human-systems integration requirements. Although the HIDP speaks directly to implementation of NASA-STD-3001 and NPR 8705.2B requirements, the human-centered design, evaluation, and design processes described in this document can be applied to any set of human-systems requirements and are independent of reference

New Vistas in Chemical Product and Process Design

DEFF Research Database (Denmark)

Zhang, Lei; Babi, Deenesh Kavi; Gani, Rafiqul

2016-01-01

Design of chemicals-based products is broadly classified into those that are process centered and those that are product centered. In this article, the designs of both classes of products are reviewed from a process systems point of view; developments related to the design of the chemical product......, its corresponding process, and its integration are highlighted. Although significant advances have been made in the development of systematic model-based techniques for process design (also for optimization, operation, and control), much work is needed to reach the same level for product design....... Timeline diagrams illustrating key contributions in product design, process design, and integrated product-process design are presented. The search for novel, innovative, and sustainable solutions must be matched by consideration of issues related to the multidisciplinary nature of problems, the lack...

Solar hydrogen project - Thermochemical process design

Energy Technology Data Exchange (ETDEWEB)

Allen, D.J.; Ng, L.F.; Rao, M.S.M.; Wu, S.F.; Zoschak, R.J.

1984-08-01

The thermochemical decomposition of water using solar energy offers an elegant way of combining solar and chemical technologies to produce a high quality fuel. The DOE has sponsored Foster Wheeler to develop a process design for a solar water-splitting process based on the sulfuric acid/iodine cycle. The study has centered around the design of a sulfuric acid decomposition reactor and the central receiver. Materials' properties impose severe constraints upon the design of decomposition reactor. In this paper, the constraints imposed on the design are specified and a reactor and receiver design is presented together with a preliminary design of the balance of plant.

Transfer between local and global processing levels by pigeons (Columba livia) and humans (Homo sapiens) in exemplar- and rule-based categorization tasks.

Science.gov (United States)

Aust, Ulrike; Braunöder, Elisabeth

2015-02-01

The present experiment investigated pigeons' and humans' processing styles-local or global-in an exemplar-based visual categorization task in which category membership of every stimulus had to be learned individually, and in a rule-based task in which category membership was defined by a perceptual rule. Group Intact was trained with the original pictures (providing both intact local and global information), Group Scrambled was trained with scrambled versions of the same pictures (impairing global information), and Group Blurred was trained with blurred versions (impairing local information). Subsequently, all subjects were tested for transfer to the 2 untrained presentation modes. Humans outperformed pigeons regarding learning speed and accuracy as well as transfer performance and showed good learning irrespective of group assignment, whereas the pigeons of Group Blurred needed longer to learn the training tasks than the pigeons of Groups Intact and Scrambled. Also, whereas humans generalized equally well to any novel presentation mode, pigeons' transfer from and to blurred stimuli was impaired. Both species showed faster learning and, for the most part, better transfer in the rule-based than in the exemplar-based task, but there was no evidence of the used processing mode depending on the type of task (exemplar- or rule-based). Whereas pigeons relied on local information throughout, humans did not show a preference for either processing level. Additional tests with grayscale versions of the training stimuli, with versions that were both blurred and scrambled, and with novel instances of the rule-based task confirmed and further extended these findings. PsycINFO Database Record (c) 2015 APA, all rights reserved.

Fundamentals of piping design

CERN Document Server

Smith, Peter

2013-01-01

Written for the piping engineer and designer in the field, this two-part series helps to fill a void in piping literature,since the Rip Weaver books of the '90s were taken out of print at the advent of the Computer Aid Design(CAD) era. Technology may have changed, however the fundamentals of piping rules still apply in the digitalrepresentation of process piping systems. The Fundamentals of Piping Design is an introduction to the designof piping systems, various processes and the layout of pipe work connecting the major items of equipment forthe new hire, the engineering student and the vetera

Rule Making and Rule Breaking: Game Development and the Governance of Emergent Behaviour

Directory of Open Access Journals (Sweden)

Jennifer R. Whitson

2010-07-01

Full Text Available Discussions of ‘control’ in games often center on players and their myriad attempts to push back upon the systems that seek to constrain them. The fact that players resist the constraints imposed upon them is not surprising, nor is it surprising that counterplay and control are such rich topics for game studies academics. In this article, I argue that players are invited by games to bend the rules. It is in the very nature of play to find the movement between the rules, and for many players the ‘fun’ in play is the inherent challenge of attempting to master, defeat, or remake games’ formal structures. These rationalities of play preclude blind obedience to the rules and have distinct implications for how games are governed. While there have been numerous studies of players who bend or break the rules (Consalvo, 2007; Foo and Koivisto, 2004; Dibbell, 1998; Kolko and Reid, 1998; Williams, 2006; Mnookin, 1997 and players who alter and re-make the rules in their role of co-producers (Sotamaa, 2009; Kücklich, 2005; Humphreys, 2005; Taylor, 2006b, there is little research on game development companies and their attempts to harness these rationalities of play and uphold the rules beyond the reflexive writings of game designers themselves (Curtis, 1992; Morningstar and Farmer, 1991; Koster, 2002.

The design process seen through the eyes of a type designer

DEFF Research Database (Denmark)

Beier, Sofie

2015-01-01

To understand how the design process works, the paper takes the outset in the work of one of the first innovating type designers: the English printer and typefounder John Baskerville (1706-1775). By comparing his way of working with a model for a contemporary design process, the paper reflects upon...

Data breaches. Final rule.

Science.gov (United States)

2008-04-11

This document adopts, without change, the interim final rule that was published in the Federal Register on June 22, 2007, addressing data breaches of sensitive personal information that is processed or maintained by the Department of Veterans Affairs (VA). This final rule implements certain provisions of the Veterans Benefits, Health Care, and Information Technology Act of 2006. The regulations prescribe the mechanisms for taking action in response to a data breach of sensitive personal information.

Practices and rules applied for the design of large dry PWR-containments within EC countries

International Nuclear Information System (INIS)

Karwat, H.

1989-01-01

The containment system is an essential component of nuclear power plants and its behaviour plays an important role in the evaluation of accident consequences of pressurized water reactors. The present report illuminates the analytical methods for the simulation of the thermohydraulic loads and the experimental background to support these methods. The national rules and practices applied within the EC member countries to determine the local and global design loads were compared. For thermohydraulic load prediction only small differences have been found, particularly in the required safety addition factors covering the uncertainties of the predictive analytical simulation procedures. Comparison of design loads shows in general that analytical methods are comparable throughout the EC member countries and, with regard to their determination, warrant to a large extent an equal degree of conservatism

Implicit and Explicit Instruction of Spelling Rules

Science.gov (United States)

Kemper, M. J.; Verhoeven, L.; Bosman, A. M. T.

2012-01-01

The study aimed to compare the differential effectiveness of explicit and implicit instruction of two Dutch spelling rules. Students with and without spelling disabilities were instructed a spelling rule either implicitly or explicitly in two experiments. Effects were tested in a pretest-intervention-posttest control group design. Experiment 1…

Failure Models of Thin-walled Steel Sheeting and Structural-spatial Design Process

NARCIS (Netherlands)

Hofmeyer, H.

2009-01-01

This presentation is the first on 20 years of research on the failure mechanisms of sheeting subjected to combined concentrated load and bending moment, performed at Technische Universiteit Eindhoven. The aim of this research is to develop accurate, insight providing design rules using simple

Assessment and Development of Engineering Design Processes

DEFF Research Database (Denmark)

Ulrikkeholm, Jeppe Bjerrum

, the engineering companies need to have efficient engineering design processes in place, so they can design customised product variants faster and more efficiently. It is however not an easy task to model and develop such processes. To conduct engineering design is often a highly iterative, illdefined and complex...... the process can be fully understood and eventually improved. Taking its starting point in this proposition, the outcome of the research is an operational 5-phased procedure for assessing and developing engineering design processes through integrated modelling of product and process, designated IPPM......, and eventually the results are discussed, overall conclusions are made and future research is proposed. The results produced throughout the research project are developed in close collaboration with the Marine Low Speed business unit within the company MAN Diesel & Turbo. The business unit is the world market...

Designing with video focusing the user-centred design process

CERN Document Server

Ylirisku, Salu Pekka

2007-01-01

Digital video for user-centered co-design is an emerging field of design, gaining increasing interest in both industry and academia. It merges the techniques and approaches of design ethnography, participatory design, interaction analysis, scenario-based design, and usability studies. This book covers the complete user-centered design project. It illustrates in detail how digital video can be utilized throughout the design process, from early user studies to making sense of video content and envisioning the future with video scenarios to provoking change with video artifacts. The text includes

Isospin sum rules for inclusive cross-sections

NARCIS (Netherlands)

Rotelli, P.; Suttorp, L.G.

1972-01-01

A systematic analysis of isospin sum rules is presented for the distribution functions of strong, electromagnetic weak inclusive processes. The general expression for these sum rules is given and some new examples are presented.

Computer-based Creativity Enhanced Conceptual Design Model for Non-routine Design of Mechanical Systems

Institute of Scientific and Technical Information of China (English)

LI Yutong; WANG Yuxin; DUFFY Alex H B

2014-01-01

Computer-based conceptual design for routine design has made great strides, yet non-routine design has not been given due attention, and it is still poorly automated. Considering that the function-behavior-structure(FBS) model is widely used for modeling the conceptual design process, a computer-based creativity enhanced conceptual design model(CECD) for non-routine design of mechanical systems is presented. In the model, the leaf functions in the FBS model are decomposed into and represented with fine-grain basic operation actions(BOA), and the corresponding BOA set in the function domain is then constructed. Choosing building blocks from the database, and expressing their multiple functions with BOAs, the BOA set in the structure domain is formed. Through rule-based dynamic partition of the BOA set in the function domain, many variants of regenerated functional schemes are generated. For enhancing the capability to introduce new design variables into the conceptual design process, and dig out more innovative physical structure schemes, the indirect function-structure matching strategy based on reconstructing the combined structure schemes is adopted. By adjusting the tightness of the partition rules and the granularity of the divided BOA subsets, and making full use of the main function and secondary functions of each basic structure in the process of reconstructing of the physical structures, new design variables and variants are introduced into the physical structure scheme reconstructing process, and a great number of simpler physical structure schemes to accomplish the overall function organically are figured out. The creativity enhanced conceptual design model presented has a dominant capability in introducing new deign variables in function domain and digging out simpler physical structures to accomplish the overall function, therefore it can be utilized to solve non-routine conceptual design problem.

Computer-based creativity enhanced conceptual design model for non-routine design of mechanical systems

Science.gov (United States)

Li, Yutong; Wang, Yuxin; Duffy, Alex H. B.

2014-11-01

Computer-based conceptual design for routine design has made great strides, yet non-routine design has not been given due attention, and it is still poorly automated. Considering that the function-behavior-structure(FBS) model is widely used for modeling the conceptual design process, a computer-based creativity enhanced conceptual design model(CECD) for non-routine design of mechanical systems is presented. In the model, the leaf functions in the FBS model are decomposed into and represented with fine-grain basic operation actions(BOA), and the corresponding BOA set in the function domain is then constructed. Choosing building blocks from the database, and expressing their multiple functions with BOAs, the BOA set in the structure domain is formed. Through rule-based dynamic partition of the BOA set in the function domain, many variants of regenerated functional schemes are generated. For enhancing the capability to introduce new design variables into the conceptual design process, and dig out more innovative physical structure schemes, the indirect function-structure matching strategy based on reconstructing the combined structure schemes is adopted. By adjusting the tightness of the partition rules and the granularity of the divided BOA subsets, and making full use of the main function and secondary functions of each basic structure in the process of reconstructing of the physical structures, new design variables and variants are introduced into the physical structure scheme reconstructing process, and a great number of simpler physical structure schemes to accomplish the overall function organically are figured out. The creativity enhanced conceptual design model presented has a dominant capability in introducing new deign variables in function domain and digging out simpler physical structures to accomplish the overall function, therefore it can be utilized to solve non-routine conceptual design problem.

What do information reuse and automated processing require in engineering design? Semantic process

Directory of Open Access Journals (Sweden)

Ossi Nykänen

2011-12-01

Full Text Available Purpose: The purpose of this study is to characterize, analyze, and demonstrate machine-understandable semantic process for validating, integrating, and processing technical design information. This establishes both a vision and tools for information reuse and semi-automatic processing in engineering design projects, including virtual machine laboratory applications with generated components.Design/methodology/approach: The process model has been developed iteratively in terms of action research, constrained by the existing technical design practices and assumptions (design documents, expert feedback, available technologies (pre-studies and experiments with scripting and pipeline tools, benchmarking with other process models and methods (notably the RUP and DITA, and formal requirements (computability and the critical information paths for the generated applications. In practice, the work includes both quantitative and qualitative components.Findings: Technical design processes may be greatly enhanced in terms of semantic process thinking, by enriching design information, and automating information validation and transformation tasks. Contemporary design information, however, is mainly intended for human consumption, and needs to be explicitly enriched with the currently missing data and interfaces. In practice, this may require acknowledging the role of technical information or knowledge engineer, to lead the development of the semantic design information process in a design organization. There is also a trade-off between machine-readability and system complexity that needs to be studied further, both empirically and in theory.Research limitations/implications: The conceptualization of the semantic process is essentially an abstraction based on the idea of progressive design. While this effectively allows implementing semantic processes with, e.g., pipeline technologies, the abstraction is valid only when technical design is organized into

RIGHTS, RULES, AND DEMOCRACY

Directory of Open Access Journals (Sweden)

Richard S. Kay, University of Connecticut-School of Law, Estados Unidos

2012-11-01

Full Text Available Abstract: Democracy require protection of certain fundamental rights, but can we expect courts to follow rules? There seems little escape from the proposition that substantive constitutional review by an unelected judiciary is a presumptive abridgement of democratic decision-making. Once we have accepted the proposition that there exist human rights that ought to be protected, this should hardly surprise us. No one thinks courts are perfect translators of the rules invoked before them on every occasion. But it is equally clear that rules sometimes do decide cases. In modern legal systems the relative roles of courts and legislators with respect to the rules of the system is a commonplace. Legislatures make rules. Courts apply them in particular disputes. When we are talking about human rights, however, that assumption must be clarified in at least one way. The defense of the practice of constitutional review in this article assumes courts can and do enforce rules. This article also makes clear what is the meaning of “following rules”. Preference for judicial over legislative interpretation of rights, therefore, seems to hang on the question of whether or not judges are capable of subordinating their own judgment to that incorporated in the rules by their makers. This article maintains that, in general, entrenched constitutional rules (and not just constitutional courts can and do constrain public conduct and protect human rights. The article concludes that the value judgments will depend on our estimate of the benefits we derive from the process of representative self-government. Against those benefits we will have to measure the importance we place on being able to live our lives with the security created by a regime of human rights protected by the rule of law. Keywords: Democracy. Human Rights. Rules. Judicial Review.

Rule-based modeling: a computational approach for studying biomolecular site dynamics in cell signaling systems

Science.gov (United States)

Chylek, Lily A.; Harris, Leonard A.; Tung, Chang-Shung; Faeder, James R.; Lopez, Carlos F.

2013-01-01

Rule-based modeling was developed to address the limitations of traditional approaches for modeling chemical kinetics in cell signaling systems. These systems consist of multiple interacting biomolecules (e.g., proteins), which themselves consist of multiple parts (e.g., domains, linear motifs, and sites of phosphorylation). Consequently, biomolecules that mediate information processing generally have the potential to interact in multiple ways, with the number of possible complexes and post-translational modification states tending to grow exponentially with the number of binary interactions considered. As a result, only large reaction networks capture all possible consequences of the molecular interactions that occur in a cell signaling system, which is problematic because traditional modeling approaches for chemical kinetics (e.g., ordinary differential equations) require explicit network specification. This problem is circumvented through representation of interactions in terms of local rules. With this approach, network specification is implicit and model specification is concise. Concise representation results in a coarse graining of chemical kinetics, which is introduced because all reactions implied by a rule inherit the rate law associated with that rule. Coarse graining can be appropriate if interactions are modular, and the coarseness of a model can be adjusted as needed. Rules can be specified using specialized model-specification languages, and recently developed tools designed for specification of rule-based models allow one to leverage powerful software engineering capabilities. A rule-based model comprises a set of rules, which can be processed by general-purpose simulation and analysis tools to achieve different objectives (e.g., to perform either a deterministic or stochastic simulation). PMID:24123887

Rule-based modeling: a computational approach for studying biomolecular site dynamics in cell signaling systems.

Science.gov (United States)

Chylek, Lily A; Harris, Leonard A; Tung, Chang-Shung; Faeder, James R; Lopez, Carlos F; Hlavacek, William S

2014-01-01

Rule-based modeling was developed to address the limitations of traditional approaches for modeling chemical kinetics in cell signaling systems. These systems consist of multiple interacting biomolecules (e.g., proteins), which themselves consist of multiple parts (e.g., domains, linear motifs, and sites of phosphorylation). Consequently, biomolecules that mediate information processing generally have the potential to interact in multiple ways, with the number of possible complexes and posttranslational modification states tending to grow exponentially with the number of binary interactions considered. As a result, only large reaction networks capture all possible consequences of the molecular interactions that occur in a cell signaling system, which is problematic because traditional modeling approaches for chemical kinetics (e.g., ordinary differential equations) require explicit network specification. This problem is circumvented through representation of interactions in terms of local rules. With this approach, network specification is implicit and model specification is concise. Concise representation results in a coarse graining of chemical kinetics, which is introduced because all reactions implied by a rule inherit the rate law associated with that rule. Coarse graining can be appropriate if interactions are modular, and the coarseness of a model can be adjusted as needed. Rules can be specified using specialized model-specification languages, and recently developed tools designed for specification of rule-based models allow one to leverage powerful software engineering capabilities. A rule-based model comprises a set of rules, which can be processed by general-purpose simulation and analysis tools to achieve different objectives (e.g., to perform either a deterministic or stochastic simulation). © 2013 Wiley Periodicals, Inc.

Design rules for piping: experimental validation of flexibility and elastic stress indices for elbows under bending

International Nuclear Information System (INIS)

Touboul, F.; Ben Jdidia, M.; Acker, D.

1989-01-01

Design rules for class 1 piping components are based on stress indices (B, C, K) and flexibility factors (k). For elbows, adjacent straight parts and internal pressure inhibit ovalization of the cross-section, so reducing the sub-mentioned indices. Published theoretical works and experimental results allow for improvement of coded values. End effect may be represented by a suitable function of the elbow angle. The favourable effect of pressure on C 2 , for fatigue damage evaluation, can be taken into account

A study on the optimal fuel loading pattern design in pressurized water reactor using the artificial neural network and the fuzzy rule based system

International Nuclear Information System (INIS)

Kim, Han Gon; Chang, Soon Heung; Lee, Byung

2004-01-01

The Optimal Fuel Shuffling System (OFSS) is developed for optimal design of PWR fuel loading pattern. In this paper, an optimal loading pattern is defined that the local power peaking factor is lower than predetermined value during one cycle and the effective multiplication factor is maximized in order to extract maximum energy. OFSS is a hybrid system that a rule based system, a fuzzy logic, and an artificial neural network are connected each other. The rule based system classifies loading patterns into two classes using several heuristic rules and a fuzzy rule. A fuzzy rule is introduced to achieve more effective and fast searching. Its membership function is automatically updated in accordance with the prediction results. The artificial neural network predicts core parameters for the patterns generated from the rule based system. The back-propagation network is used for fast prediction of core parameters. The artificial neural network and the fuzzy logic can be used as the tool for improvement of existing algorithm's capabilities. OFSS was demonstrated and validated for cycle 1 of Kori unit 1 PWR. (author)

A study on the optimal fuel loading pattern design in pressurized water reactor using the artificial neural network and the fuzzy rule based system

Energy Technology Data Exchange (ETDEWEB)

Kim, Han Gon; Chang, Soon Heung; Lee, Byung [Department of Nuclear Engineering, Korea Advanced Institute of Science and Technology, Yusong-gu, Taejon (Korea, Republic of)

2004-07-01

The Optimal Fuel Shuffling System (OFSS) is developed for optimal design of PWR fuel loading pattern. In this paper, an optimal loading pattern is defined that the local power peaking factor is lower than predetermined value during one cycle and the effective multiplication factor is maximized in order to extract maximum energy. OFSS is a hybrid system that a rule based system, a fuzzy logic, and an artificial neural network are connected each other. The rule based system classifies loading patterns into two classes using several heuristic rules and a fuzzy rule. A fuzzy rule is introduced to achieve more effective and fast searching. Its membership function is automatically updated in accordance with the prediction results. The artificial neural network predicts core parameters for the patterns generated from the rule based system. The back-propagation network is used for fast prediction of core parameters. The artificial neural network and the fuzzy logic can be used as the tool for improvement of existing algorithm's capabilities. OFSS was demonstrated and validated for cycle 1 of Kori unit 1 PWR. (author)

On-the-fly auditing of business processes

NARCIS (Netherlands)

Hee, van K.M.; Hidders, A.J.H.; Houben, G.J.P.M.; Paredaens, J.; Thiran, P.A.P.; Jensen, K.; Donatelli, S.; Koutny, M.

2010-01-01

Information systems supporting business processes are usually very complex. If we have to ensure that certain business rules are enforced in a business process, it is often easier to design a separate system, called a monitor, that collects the events of the business processes and verifies whether

Design rules against buckling of dished heads

International Nuclear Information System (INIS)

Roche, R.L.; Alix, M.; Autrusson, B.

1984-01-01

The aim of this paper is to present the validation of the rules of the French code of presure vessels CODAP. First, it is shown that the theories of buckling cannot give alone a sufficient base of validation and that the experimental justification is necessary. Then, the admissible pressure values corresponding to the CODAP formules are compared with the experimental results. This comparison furnishes the safety margins given by the CODAP formules. Finally, buckling tests of torispherical shells carried out at the CEA Saclay (France) are presented. The results obtained can be represented by a simple semi-empiric formula [fr

Computational Chemical Synthesis Analysis and Pathway Design

Directory of Open Access Journals (Sweden)

Fan Feng

2018-06-01

Full Text Available With the idea of retrosynthetic analysis, which was raised in the 1960s, chemical synthesis analysis and pathway design have been transformed from a complex problem to a regular process of structural simplification. This review aims to summarize the developments of computer-assisted synthetic analysis and design in recent years, and how machine-learning algorithms contributed to them. LHASA system started the pioneering work of designing semi-empirical reaction modes in computers, with its following rule-based and network-searching work not only expanding the databases, but also building new approaches to indicating reaction rules. Programs like ARChem Route Designer replaced hand-coded reaction modes with automatically-extracted rules, and programs like Chematica changed traditional designing into network searching. Afterward, with the help of machine learning, two-step models which combine reaction rules and statistical methods became the main stream. Recently, fully data-driven learning methods using deep neural networks which even do not require any prior knowledge, were applied into this field. Up to now, however, these methods still cannot replace experienced human organic chemists due to their relatively low accuracies. Future new algorithms with the aid of powerful computational hardware will make this topic promising and with good prospects.

New Vistas in Chemical Product and Process Design.

Science.gov (United States)

Zhang, Lei; Babi, Deenesh K; Gani, Rafiqul

2016-06-07

Design of chemicals-based products is broadly classified into those that are process centered and those that are product centered. In this article, the designs of both classes of products are reviewed from a process systems point of view; developments related to the design of the chemical product, its corresponding process, and its integration are highlighted. Although significant advances have been made in the development of systematic model-based techniques for process design (also for optimization, operation, and control), much work is needed to reach the same level for product design. Timeline diagrams illustrating key contributions in product design, process design, and integrated product-process design are presented. The search for novel, innovative, and sustainable solutions must be matched by consideration of issues related to the multidisciplinary nature of problems, the lack of data needed for model development, solution strategies that incorporate multiscale options, and reliability versus predictive power. The need for an integrated model-experiment-based design approach is discussed together with benefits of employing a systematic computer-aided framework with built-in design templates.

SOLVING GLOBAL PROBLEMS USING COLLABORATIVE DESIGN PROCESSES

DEFF Research Database (Denmark)

Lenau, Torben Anker; Mejborn, Christina Okai

2011-01-01

In this paper we argue that use of collaborative design processes is a powerful means of bringing together different stakeholders and generating ideas in complex design situations. The collaborative design process was used in a workshop with international participants where the goal was to propos...

On-the-fly auditing of business processes

NARCIS (Netherlands)

Hee, van K.M.; Hidders, A.J.H.; Houben, G.J.P.M.; Paredaens, J.; Thiran, P.A.P.

2009-01-01

Information systems supporting business process are mostly very complex. If we have to ensure that certain business rules are enforced in a business process, it is often easier to design a separate system, called a monitor, that collects the events of the business processes and verifies whether the

Design and pitfalls of Basel's new liquidity rules

OpenAIRE

König, Philipp; Pothier, David

2016-01-01

Following the financial crisis of 2008/09, the Basel Committee on Banking Supervision introduced a new framework for banking regulation, commonly known as Basel III. For the first time since the inception of global banking regulation in 1988, Basel III contains explicit mandatory rules for liquidity regulation. The cornerstones of the new liquidity regulation are two balance sheet ratios that seek to reduce banks' liquidity transformation. While regulation addressing liquidity risk in the ban...

Decision support system for triage management: A hybrid approach using rule-based reasoning and fuzzy logic.

Science.gov (United States)

Dehghani Soufi, Mahsa; Samad-Soltani, Taha; Shams Vahdati, Samad; Rezaei-Hachesu, Peyman

2018-06-01

Fast and accurate patient triage for the response process is a critical first step in emergency situations. This process is often performed using a paper-based mode, which intensifies workload and difficulty, wastes time, and is at risk of human errors. This study aims to design and evaluate a decision support system (DSS) to determine the triage level. A combination of the Rule-Based Reasoning (RBR) and Fuzzy Logic Classifier (FLC) approaches were used to predict the triage level of patients according to the triage specialist's opinions and Emergency Severity Index (ESI) guidelines. RBR was applied for modeling the first to fourth decision points of the ESI algorithm. The data relating to vital signs were used as input variables and modeled using fuzzy logic. Narrative knowledge was converted to If-Then rules using XML. The extracted rules were then used to create the rule-based engine and predict the triage levels. Fourteen RBR and 27 fuzzy rules were extracted and used in the rule-based engine. The performance of the system was evaluated using three methods with real triage data. The accuracy of the clinical decision support systems (CDSSs; in the test data) was 99.44%. The evaluation of the error rate revealed that, when using the traditional method, 13.4% of the patients were miss-triaged, which is statically significant. The completeness of the documentation also improved from 76.72% to 98.5%. Designed system was effective in determining the triage level of patients and it proved helpful for nurses as they made decisions, generated nursing diagnoses based on triage guidelines. The hybrid approach can reduce triage misdiagnosis in a highly accurate manner and improve the triage outcomes. Copyright © 2018 Elsevier B.V. All rights reserved.

Driver's various information process and multi-ruled decision-making mechanism: a fundamental of intelligent driving shaping model

Directory of Open Access Journals (Sweden)

Wuhong Wang

2011-05-01

Full Text Available The most difficult but important problem in advance driver assistance system development is how to measure and model the behavioral response of drivers with focusing on the cognition process. This paper describes driver's deceleration and acceleration behavior based on driving situation awareness in the car-following process, and then presents several driving models for analysis of driver's safety approaching behavior in traffic operation. The emphasis of our work is placed on the research of driver's various information process and multi-ruled decisionmaking mechanism by considering the complicated control process of driving; the results will be able to provide a theoretical basis for intelligent driving shaping model.

Hidden realities inside PBL design processes

DEFF Research Database (Denmark)

Pihl, Ole Verner

2015-01-01

Design Process, but is a group-based architecture and design education better than that which is individually based? How does PBL affect space, form, and creative processes? Hans Kiib, professor and one of the founders of the Department of Architecture and Design in Aalborg, describes his intentions...... are passing from a complex world into one based on super complexity? Could Gaston Bachelard (1958), who writes in his book The Poetic of Space "that poets and artists are born phenomenologists," help architecture and design students in their journey to find his/her own professional expression? This paper...

Graphic Design in Libraries: A Conceptual Process

Science.gov (United States)

Ruiz, Miguel

2014-01-01

Providing successful library services requires efficient and effective communication with users; therefore, it is important that content creators who develop visual materials understand key components of design and, specifically, develop a holistic graphic design process. Graphic design, as a form of visual communication, is the process of…

EPR design tools. Integrated data processing tools

International Nuclear Information System (INIS)

Kern, R.

1997-01-01

In all technical areas, planning and design have been supported by electronic data processing for many years. New data processing tools had to be developed for the European Pressurized Water Reactor (EPR). The work to be performed was split between KWU and Framatome and laid down in the Basic Design contract. The entire plant was reduced to a logical data structure; the circuit diagrams and flowsheets of the systems were drafted, the central data pool was established, the outlines of building structures were defined, the layout of plant components was planned, and the electrical systems were documented. Also building construction engineering was supported by data processing. The tasks laid down in the Basic Design were completed as so-called milestones. Additional data processing tools also based on the central data pool are required for the phases following after the Basic Design phase, i.e Basic Design Optimization; Detailed Design; Management; Construction, and Commissioning. (orig.) [de

Conceptual design of distillation-based hybrid separation processes.

Science.gov (United States)

Skiborowski, Mirko; Harwardt, Andreas; Marquardt, Wolfgang

2013-01-01

Hybrid separation processes combine different separation principles and constitute a promising design option for the separation of complex mixtures. Particularly, the integration of distillation with other unit operations can significantly improve the separation of close-boiling or azeotropic mixtures. Although the design of single-unit operations is well understood and supported by computational methods, the optimal design of flowsheets of hybrid separation processes is still a challenging task. The large number of operational and design degrees of freedom requires a systematic and optimization-based design approach. To this end, a structured approach, the so-called process synthesis framework, is proposed. This article reviews available computational methods for the conceptual design of distillation-based hybrid processes for the separation of liquid mixtures. Open problems are identified that must be addressed to finally establish a structured process synthesis framework for such processes.

Algorithmic Mechanism Design of Evolutionary Computation.

Science.gov (United States)

Pei, Yan

2015-01-01

We consider algorithmic design, enhancement, and improvement of evolutionary computation as a mechanism design problem. All individuals or several groups of individuals can be considered as self-interested agents. The individuals in evolutionary computation can manipulate parameter settings and operations by satisfying their own preferences, which are defined by an evolutionary computation algorithm designer, rather than by following a fixed algorithm rule. Evolutionary computation algorithm designers or self-adaptive methods should construct proper rules and mechanisms for all agents (individuals) to conduct their evolution behaviour correctly in order to definitely achieve the desired and preset objective(s). As a case study, we propose a formal framework on parameter setting, strategy selection, and algorithmic design of evolutionary computation by considering the Nash strategy equilibrium of a mechanism design in the search process. The evaluation results present the efficiency of the framework. This primary principle can be implemented in any evolutionary computation algorithm that needs to consider strategy selection issues in its optimization process. The final objective of our work is to solve evolutionary computation design as an algorithmic mechanism design problem and establish its fundamental aspect by taking this perspective. This paper is the first step towards achieving this objective by implementing a strategy equilibrium solution (such as Nash equilibrium) in evolutionary computation algorithm.

The Role(s) of Process Models in Design Practice

DEFF Research Database (Denmark)

Iversen, Søren; Jensen, Mads Kunø Nyegaard; Vistisen, Peter

2018-01-01

This paper investigates how design process models are implemented and used in design-driven organisations. The archetypical theoretical framing of process models, describe their primary role as guiding the design process, and assign roles and deliverables throughout the process. We hypothesise...... that the process models also take more communicative roles in practice, both in terms of creating an internal design rationale, as well as demystifying the black box of design thinking to external stakeholders. We investigate this hypothesis through an interview study of four major danish design......-driven organisations, and analyse the different roles their archetypical process models take in their organisations. The main contribution is the identification of three, often overlapping roles, which design process models showed to assume in design-driven organisations: process guidance, adding transparency...

Governing the Rule-Making of Organic Agriculture

DEFF Research Database (Denmark)

Linneberg, Mai Skjøtt

of Denmark and Sweden. Although the cases illustrate two modes of governance: in the former, rule-making is formally internalized in the State and in the latter, in a private-interest organization, a similar set of stakeholders participate in the actual rule-making processes. The analysis provides...... an interesting avenue into understanding the relationship between local and supranational rule-makers, and how local rule-makers may act to secure local circumstances and demands from supranational legislators concurrently. Moreover, the analysis offers suggestions as to possible consequences of striving...

Experimental design of high energy electron gun by means of scaling rules

International Nuclear Information System (INIS)

Wojcicki, S.

1996-01-01

The possibility of the design of a new family of electron guns by means of scaling theory of electron-optical devices (EOD) is presented. According to the theory, EOD with a relatively big space charge, as in high energy Pierce type electron guns used in technological equipment, generally cannot be scaled, because of their nonlinear space charge nature. Therefore, the scaling rules are applied here only to the anode zone of the gun, where the electron beam perveance is small, and the cathode lens of gun with considerable space charge remains unchanged. The procedure for scaling a 25 kV and 150 mA gun with cylindrical electron beam into a high voltage 75 kV and 150 mA electron system is given. An experimental investigation proved the high technological quality of a high voltage gun constructed according to the above conception. (author)

A Robust Process Analytical Technology (PAT) System Design for Crystallization Processes

DEFF Research Database (Denmark)

Abdul Samad, Noor Asma Fazli Bin; Sin, Gürkan; Gernaey, Krist

2013-01-01

A generic computer-aided framework for systematic design of a process monitoring and control system for crystallization processes has been developed to study various aspects of crystallization operations. The design framework contains a generic multidimensional modelling framework, a tool for gen...

Model based process-product design and analysis

DEFF Research Database (Denmark)

Gani, Rafiqul

This paper gives a perspective on modelling and the important role it has within product-process design and analysis. Different modelling issues related to development and application of systematic model-based solution approaches for product-process design is discussed and the need for a hybrid...... model-based framework is highlighted. This framework should be able to manage knowledge-data, models, and associated methods and tools integrated with design work-flows and data-flows for specific product-process design problems. In particular, the framework needs to manage models of different types......, forms and complexity, together with their associated parameters. An example of a model-based system for design of chemicals based formulated products is also given....

Leaving room for improvisation: towards a design approach for open-ended play.

NARCIS (Netherlands)

Valk, de L.C.T.; Bekker, M.M.; Eggen, J.H.

2013-01-01

Open-ended play with interactive objects provides children with the freedom to construct their own rules, goals and meaning. Instead of games with strict rules, open-ended play designs offer interaction opportunities as a trigger for creating personalized games. The process of developing these

Information processing theory in the early design stages

DEFF Research Database (Denmark)

Cash, Philip; Kreye, Melanie

2014-01-01

suggestions for improvements and support. One theory that may be particularly applicable to the early design stages is Information Processing Theory (IPT) as it is linked to the design process with regard to the key concepts considered. IPT states that designers search for information if they perceive......, the new knowledge is shared between the design team to reduce ambiguity with regards to its meaning and to build a shared understanding – reducing perceived uncertainty. Thus, we propose that Information-Processing Theory is suitable to describe designer activity in the early design stages...... uncertainty with regard to the knowledge necessary to solve a design challenge. They then process this information and compare if the new knowledge they have gained covers the previous knowledge gap. In engineering design, uncertainty plays a key role, particularly in the early design stages which has been...

Fuzzy-Rule-Based Object Identification Methodology for NAVI System

Directory of Open Access Journals (Sweden)

Yaacob Sazali

2005-01-01

Full Text Available We present an object identification methodology applied in a navigation assistance for visually impaired (NAVI system. The NAVI has a single board processing system (SBPS, a digital video camera mounted headgear, and a pair of stereo earphones. The captured image from the camera is processed by the SBPS to generate a specially structured stereo sound suitable for vision impaired people in understanding the presence of objects/obstacles in front of them. The image processing stage is designed to identify the objects in the captured image. Edge detection and edge-linking procedures are applied in the processing of image. A concept of object preference is included in the image processing scheme and this concept is realized using a fuzzy-rule base. The blind users are trained with the stereo sound produced by NAVI for achieving a collision-free autonomous navigation.

Fuzzy-Rule-Based Object Identification Methodology for NAVI System

Science.gov (United States)

Nagarajan, R.; Sainarayanan, G.; Yaacob, Sazali; Porle, Rosalyn R.

2005-12-01

We present an object identification methodology applied in a navigation assistance for visually impaired (NAVI) system. The NAVI has a single board processing system (SBPS), a digital video camera mounted headgear, and a pair of stereo earphones. The captured image from the camera is processed by the SBPS to generate a specially structured stereo sound suitable for vision impaired people in understanding the presence of objects/obstacles in front of them. The image processing stage is designed to identify the objects in the captured image. Edge detection and edge-linking procedures are applied in the processing of image. A concept of object preference is included in the image processing scheme and this concept is realized using a fuzzy-rule base. The blind users are trained with the stereo sound produced by NAVI for achieving a collision-free autonomous navigation.

Fuzzy Rule Suram for Wood Drying

Science.gov (United States)

Situmorang, Zakarias

2017-12-01

Implemented of fuzzy rule must used a look-up table as defuzzification analysis. Look-up table is the actuator plant to doing the value of fuzzification. Rule suram based of fuzzy logic with variables of weather is temperature ambient and humidity ambient, it implemented for wood drying process. The membership function of variable of state represented in error value and change error with typical map of triangle and map of trapezium. Result of analysis to reach 4 fuzzy rule in 81 conditions to control the output system can be constructed in a number of way of weather and conditions of air. It used to minimum of the consumption of electric energy by heater. One cycle of schedule drying is a serial of condition of chamber to process as use as a wood species.

78 FR 9987 - Social Security Ruling, SSR 13-1p; Titles II and XVI: Agency Processes for Addressing Allegations...

Science.gov (United States)

2013-02-12

... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA-2012-0071] Social Security Ruling, SSR 13-1p; Titles II and XVI: Agency Processes for Addressing Allegations of Unfairness, Prejudice, Partiality, Bias, Misconduct, or Discrimination by Administrative Law Judges (ALJs); Correction AGENCY: Social Security...

78 FR 22361 - Social Security Ruling, SSR 13-1p; Titles II and XVI: Agency Processes for Addressing Allegations...

Science.gov (United States)

2013-04-15

... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA-2012-0071] Social Security Ruling, SSR 13-1p; Titles II and XVI: Agency Processes for Addressing Allegations of Unfairness, Prejudice, Partiality, Bias, Misconduct, or Discrimination by Administrative Law Judges (ALJs); Correction AGENCY: Social Security...

On Intelligent Design and Planning Method of Process Route Based on Gun Breech Machining Process

Science.gov (United States)

Hongzhi, Zhao; Jian, Zhang

2018-03-01

The paper states an approach of intelligent design and planning of process route based on gun breech machining process, against several problems, such as complex machining process of gun breech, tedious route design and long period of its traditional unmanageable process route. Based on gun breech machining process, intelligent design and planning system of process route are developed by virtue of DEST and VC++. The system includes two functional modules--process route intelligent design and its planning. The process route intelligent design module, through the analysis of gun breech machining process, summarizes breech process knowledge so as to complete the design of knowledge base and inference engine. And then gun breech process route intelligently output. On the basis of intelligent route design module, the final process route is made, edited and managed in the process route planning module.

Design of plutonium processing facilities

International Nuclear Information System (INIS)

Derbyshire, W.; Sills, R.J.

1982-01-01

Five considerations for the design of plutonium processing facilities are identified. These are: Toxicity, Radiation, Criticality, Containment and Remote Operation. They are examined with reference to reprocessing spent nuclear fuel and application is detailed both for liquid and dry processes. (author)

Flanged joints with contact outside the bolt circle: ASME Part B design rules

International Nuclear Information System (INIS)

Rodabaugh, E.C.; Moore, S.E.

1976-05-01

The ASME Boiler and Pressure Vessel Code, Section VIII, Division 1, gives rules which are subdivided into ''Part A'' and ''Part B''. Part A covers flanged joints where contact between flanges occurs through a gasket located inside the bolt holes. Part B covers flanged joints with contact outside the bolt holes. This report (a) summarizes the theory for Part B flanged joints, (b) presents examples which show the significant differences between Part A flanged joints and Part B flanged joints, (c) presents the available test data relevant to the characteristics of Part B flanged joints, (d) gives listings of two computer programs which can be used to evaluate the characteristics of Part B flanged joints, and (e) gives recommendations for Code revisions and other aspects of Part B flanged-joint design

Codification of LMFBR rules and comparison of codes

International Nuclear Information System (INIS)

Faure, O.; Debaene, J.P.

1993-01-01

The first part of this report presents the basic RCC-MR (regles de conception et de construction des materiels mecaniques des ilots nucleaires, reacteurs a neutrons rapides) design rules and their purpose. The second part is a qualitative comparison between RCC-MR, Code case N47 (ASME) and ETSDG Guide (MONJU Guide), made on the following topics: negligible creep test, ratcheting, creep fatigue, buckling, piping rules. An outline is given on improvements to RCC-MR rules now in progress

Logical-rules and the classification of integral dimensions: Individual differences in the processing of arbitrary dimensions

Directory of Open Access Journals (Sweden)

Anthea G. Blunden

2015-01-01

Full Text Available A variety of converging operations demonstrate key differences between separable dimensions, which can be analyzed independently, and integral dimensions, which are processed in a non-analytic fashion. A recent investigation of response time distributions, applying a set of logical rule-based models, demonstrated that integral dimensions are pooled into a single coactive processing channel, in contrast to separable dimensions, which are processed in multiple, independent processing channels. This paper examines the claim that arbitrary dimensions created by factorially morphing four faces are processed in an integral manner (i.e., coactively. In two experiments, sixteen participants completed a categorization task in which either upright or inverted morph stimuli were classified in a speeded fashion. Analyses focused on contrasting different assumptions about the psychological representation of the stimuli, perceptual and decisional separability, and the processing architecture. We report consistent individual differences which demonstrate a mixture of some observers who demonstrate coactive processing with other observers who process the dimensions in a parallel self-terminating manner.

A Systematic Synthesis Framework for Extractive Distillation Processes

DEFF Research Database (Denmark)

Kossack, S.; Kraemer, K.; Gani, Rafiqul

2008-01-01

An effective extractive distillation process depends on the choice of the extractive agent. in this contribution, heuristic rules for entrainer selection and the design of entrainers through computer-aided molecular design are reviewed. The potential of the generated alternatives is then evaluated...

Drivers of Changes in Product Development Rules

DEFF Research Database (Denmark)

Christiansen, John K.; Varnes, Claus J.

2015-01-01

regimes. However, the analysis here indicates that there are different drivers, both internal and external, that cause companies to adopt new rules or modify their existing ones, such as changes in organizational structures, organizational conflicts, and changes in ownership or strategy. In addition......Purpose: - The purpose of this research is to investigate the drivers that induce companies to change their rules for managing product development. Most companies use a form of rule-based management approach, but surprisingly little is known about what makes companies change these rules...... 10 years based on three rounds of interviews with 40 managers. Findings: - Previous research has assumed that the dynamics of product development rules are based on internal learning processes, and that increasingly competent management will stimulate the implementation of newer and more complex rule...

Modeling and simulation for process and safeguards system design

International Nuclear Information System (INIS)

Gutmacher, R.G.; Kern, E.A.; Duncan, D.R.; Benecke, M.W.

1983-01-01

A computer modeling and simulation approach that meets the needs of both the process and safeguards system designers is described. The results have been useful to Westinghouse Hanford Company process designers in optimizing the process scenario and operating scheme of the Secure Automated Fabrication line. The combined process/measurements model will serve as the basis for design of the safeguards system. Integration of the process design and the safeguards system design should result in a smoothly operating process that is easier to safeguard

A Template for Design for eXcellence (DfX) methods

NARCIS (Netherlands)

Jauregui Becker, Juan Manuel; Wits, Wessel Willems; Abramovici, Michael; Stark, Rainer

2013-01-01

Design for eXcellence (DfX) entails a wide range of goal specific design methods targeting different phases of a product’s lifecycle. These methods are often not standardized and sometimes even have contradicting rules among them. As a consequence, design processes experience an increase in

Design of object processing systems

NARCIS (Netherlands)

Grigoras, D.R.; Hoede, C.

Object processing systems are met rather often in every day life, in industry, tourism, commerce, etc. When designing such a system, many problems can be posed and considered, depending on the scope and purpose of design. We give here a general approach which involves graph theory, and which can

Choice Rules and Accumulator Networks

Science.gov (United States)

2015-01-01

This article presents a preference accumulation model that can be used to implement a number of different multi-attribute heuristic choice rules, including the lexicographic rule, the majority of confirming dimensions (tallying) rule and the equal weights rule. The proposed model differs from existing accumulators in terms of attribute representation: Leakage and competition, typically applied only to preference accumulation, are also assumed to be involved in processing attribute values. This allows the model to perform a range of sophisticated attribute-wise comparisons, including comparisons that compute relative rank. The ability of a preference accumulation model composed of leaky competitive networks to mimic symbolic models of heuristic choice suggests that these 2 approaches are not incompatible, and that a unitary cognitive model of preferential choice, based on insights from both these approaches, may be feasible. PMID:28670592

Targeted training of the decision rule benefits rule-guided behavior in Parkinson's disease.

Science.gov (United States)

Ell, Shawn W

2013-12-01

The impact of Parkinson's disease (PD) on rule-guided behavior has received considerable attention in cognitive neuroscience. The majority of research has used PD as a model of dysfunction in frontostriatal networks, but very few attempts have been made to investigate the possibility of adapting common experimental techniques in an effort to identify the conditions that are most likely to facilitate successful performance. The present study investigated a targeted training paradigm designed to facilitate rule learning and application using rule-based categorization as a model task. Participants received targeted training in which there was no selective-attention demand (i.e., stimuli varied along a single, relevant dimension) or nontargeted training in which there was selective-attention demand (i.e., stimuli varied along a relevant dimension as well as an irrelevant dimension). Following training, all participants were tested on a rule-based task with selective-attention demand. During the test phase, PD patients who received targeted training performed similarly to control participants and outperformed patients who did not receive targeted training. As a preliminary test of the generalizability of the benefit of targeted training, a subset of the PD patients were tested on the Wisconsin card sorting task (WCST). PD patients who received targeted training outperformed PD patients who did not receive targeted training on several WCST performance measures. These data further characterize the contribution of frontostriatal circuitry to rule-guided behavior. Importantly, these data also suggest that PD patient impairment, on selective-attention-demanding tasks of rule-guided behavior, is not inevitable and highlight the potential benefit of targeted training.

Sociotechnical design processes and working environment: The case of a continuous process wok

DEFF Research Database (Denmark)

Broberg, Ole

2000-01-01

A five-year design process of a continuous process wok has been studied with the aim of elucidating the conditions for integrating working environment aspects. The design process is seen as a network building activity and as a social shaping process of the artefact. A working environment log...... is suggested as a tool designers can use to integrate considerations of future operators' working environment....

Integrated Process Design and Control of Multi-element Reactive Distillation Processes

DEFF Research Database (Denmark)

Mansouri, Seyed Soheil; Sales-Cruz, Mauricio; Huusom, Jakob Kjøbsted

2016-01-01

In this work, integrated process design and control of reactive distillation processes involving multi-elements is presented. The reactive distillation column is designed using methods and tools which are similar in concept to non-reactive distillation design methods, such as driving force approach....... The methods employed in this work are based on equivalent element concept. This concept facilitates the representation of a multi-element reactive system as equivalent binary light and heavy key elements. First, the reactive distillation column is designed at the maximum driving force where through steady...

Unified patterns to transform business rules into an event coordination mechanism

OpenAIRE

De Roover, Willem; Vanthienen, Jan

2011-01-01

Business rules define and constrain various aspects of the business, such as vocabulary, behavior and organizational issues. Enforcing the rules of the business in information systems is however not straightforward, because different mechanisms exist for the (semi-)automatic transformation of various business constraints and rules. In this paper, we examine if and how business rules, not only data rules, but also process rules, timing rules, authorization rules, etc., can be expressed i...

Implementasi Rule Based Expert Systems untuk Realtime Monitoring Penyelesaian Perkara Pidana Menggunakan Teknologi Radio Frequency Identification

Directory of Open Access Journals (Sweden)

Mar Fuah

2017-05-01

Full Text Available One of the problems in the criminal case completions is that the difficulty of making decision to estimate when the settlement of the case file will be fulfilled. It is caused by the number of case files handled and detention time changing. Therefore, the fast and accurate information is needed. The research aims to develop a monitoring system tracking and tracking of scheduling rules using Rule Based Expert Systems method with 17 rules, and supported by Radio Frequency Identification technology (RFID in the form of computer applications. Based on the output of the system, an analysis is performed in the criminal case settlement process with a set of IF-THEN rules. The RFID reader read the data of case files through radio wave signals emitted by the antenna toward active-Tag attached in the criminal case file. The system is designed to monitor the tracking and tracing of RFID-based scheduling rules in realtime way that was built in the form of computer application in accordance with the system design. This study results in no failure in reading active tags by the RFID reader to detect criminal case files that had been examined. There were many case files handled in three different location, they were the constabulary, prosecutor, and judges of district court and RFID was able to identify them simultaneously. So, RFID supports the implementation of Rule Based Expert Systems very much for realtime monitoring in criminal case accomplishment.

At Home with Sustainability: From Green Default Rules to Sustainable Consumption

Directory of Open Access Journals (Sweden)

Lara Anne Hale

2018-01-01

Full Text Available Although it is often assumed that default rules affect change without awareness, this paper suggests that contrast with the default and transition into conscious adoption of the default design may be the starting point to establish long-term changes in consumer behavior. Despite the rooting of default rules in subconscious decision-making, this research finds that, ultimately, awareness drives the demand necessary for the creation of sustainable consumption. Whereas direct appeal to individuals has a disappointing level of influence on sustainability choices, it is understood that green consumers do come from somewhere. Green default rules offer interesting prospects for sidestepping the drawbacks of direct marketing to individuals. Under green default rules, behavior is guided by a default, such as utilities automatically sending customers renewables-sourced instead of fossil-fuel-based energy. To act otherwise requires additional effort and is less likely. Motivated by a need to understand how defaults might bridge standards and sustainable consumption, I investigate how organizational processes potentially lead from standardized green default rules to individual awareness that can spread and facilitate sustainable consumption. This paper examines the Active House sustainable building demonstrations in Europe in order to understand how (1 communications and market creation and (2 responsible, user-centered experimentation are organized to move from defaults to sustainable consumption.

Documenting the Engineering Design Process

Science.gov (United States)

Hollers, Brent

2017-01-01

Documentation of ideas and the engineering design process is a critical, daily component of a professional engineer's job. While patent protection is often cited as the primary rationale for documentation, it can also benefit the engineer, the team, company, and stakeholders through creating a more rigorously designed and purposeful solution.…

Adaptive Conflict-Free Optimization of Rule Sets for Network Security Packet Filtering Devices

Directory of Open Access Journals (Sweden)

Andrea Baiocchi

2015-01-01

Full Text Available Packet filtering and processing rules management in firewalls and security gateways has become commonplace in increasingly complex networks. On one side there is a need to maintain the logic of high level policies, which requires administrators to implement and update a large amount of filtering rules while keeping them conflict-free, that is, avoiding security inconsistencies. On the other side, traffic adaptive optimization of large rule lists is useful for general purpose computers used as filtering devices, without specific designed hardware, to face growing link speeds and to harden filtering devices against DoS and DDoS attacks. Our work joins the two issues in an innovative way and defines a traffic adaptive algorithm to find conflict-free optimized rule sets, by relying on information gathered with traffic logs. The proposed approach suits current technology architectures and exploits available features, like traffic log databases, to minimize the impact of ACO development on the packet filtering devices. We demonstrate the benefit entailed by the proposed algorithm through measurements on a test bed made up of real-life, commercial packet filtering devices.

Evaluation of the influence of dominance rules for the assembly line design problem under consideration of product design alternatives

Science.gov (United States)

Oesterle, Jonathan; Lionel, Amodeo

2018-06-01

The current competitive situation increases the importance of realistically estimating product costs during the early phases of product and assembly line planning projects. In this article, several multi-objective algorithms using difference dominance rules are proposed to solve the problem associated with the selection of the most effective combination of product and assembly lines. The list of developed algorithms includes variants of ant colony algorithms, evolutionary algorithms and imperialist competitive algorithms. The performance of each algorithm and dominance rule is analysed by five multi-objective quality indicators and fifty problem instances. The algorithms and dominance rules are ranked using a non-parametric statistical test.

Rules-based analysis with JBoss Drools: adding intelligence to automation

International Nuclear Information System (INIS)

Ley, E. de; Jacobs, D.

2012-01-01

Rule engines are specialized software systems for applying conditional actions (if/then rules) on data. They are also known as 'production rule systems'. Rules engines are less-known as software technology than the traditional procedural, object-oriented, scripting or dynamic development languages. This is a pity, as their usage may offer an important enrichment to a development toolbox. JBoss Drools is an open-source rules engine that can easily be embedded in any Java application. Through an integration in our Passerelle process automation suite, we have been able to provide advanced solutions for intelligent process automation, complex event processing, system monitoring and alarming, automated repair etc. This platform has been proven for many years as an automated diagnosis and repair engine for Belgium's largest telecom provider, and it is being piloted at Synchrotron Soleil for device monitoring and alarming. After an introduction to rules engines in general and JBoss Drools in particular, we will present its integration in a solution platform, some important principles and a practical use case. (authors)

Symmetry in quantum system theory: Rules for quantum architecture design

Energy Technology Data Exchange (ETDEWEB)

Schulte-Herbrueggen, Thomas; Sander, Uwe [Technical University of Munich, Garching (Germany). Dept. Chem.

2010-07-01

We investigate universality in the sense of controllability and observability, of multi-qubit systems in architectures of various symmetries of coupling type and topology. By determining the respective dynamic system Lie algebras, explicit reachability sets under symmetry constraints are provided. Thus for a given (possibly symmetric) experimental coupling architecture several decision problems can be solved in a unified way: (i) can a target Hamiltonian be simulated? (ii) can a target gate be synthesised? (iii) to which extent is the system observable by a given set of detection operators? and, as a special case of the latter, (iv) can an underlying system Hamiltonian be identified with a given set of detection operators? Finally, in turn, the absence of symmetry provides a convenient necessary condition for full controllability. Though often easier to assess than the well-established Lie-algebra rank condition, this is not sufficient unless the candidate dynamic simple Lie algebra can be pre-identified uniquely. Thus for architectures with various Ising and Heisenberg coupling types we give design rules sufficient to ensure full controllability. In view of follow-up studies, we relate the unification of necessary and sufficient conditions for universality to filtering simple Lie subalgebras of su(N) comprising classical and exceptional types.

An evaluation and implementation of rule-based Home Energy Management System using the Rete algorithm.

Science.gov (United States)

Kawakami, Tomoya; Fujita, Naotaka; Yoshihisa, Tomoki; Tsukamoto, Masahiko

2014-01-01

In recent years, sensors become popular and Home Energy Management System (HEMS) takes an important role in saving energy without decrease in QoL (Quality of Life). Currently, many rule-based HEMSs have been proposed and almost all of them assume "IF-THEN" rules. The Rete algorithm is a typical pattern matching algorithm for IF-THEN rules. Currently, we have proposed a rule-based Home Energy Management System (HEMS) using the Rete algorithm. In the proposed system, rules for managing energy are processed by smart taps in network, and the loads for processing rules and collecting data are distributed to smart taps. In addition, the number of processes and collecting data are reduced by processing rules based on the Rete algorithm. In this paper, we evaluated the proposed system by simulation. In the simulation environment, rules are processed by a smart tap that relates to the action part of each rule. In addition, we implemented the proposed system as HEMS using smart taps.

THE APPLICATION PROCESS OF HAMBURG RULES, GIVEN THE CONTEXT OF THE EMERGENCE AND ENTRY INTO FORCE OF THE NEW ROMANIAN CIVIL CODE

Directory of Open Access Journals (Sweden)

Adriana Elena Belu

2013-11-01

Full Text Available The paper aims to conduct a comparative analysis and tries to offer an objective point of view regarding a number of questions arisen in practice, related to the applicability of the 1978 Hamburg Rules and keeping public order of Romanian private international law, such as those that aim at: agreeing upon the applicability of the foreign law by the Romanian parties; applicability of the Hamburg Rules; public nuisance of the Romanian private international law; character of public policy rule of the Hamburg Rules. In the application process of the Hamburg Rules, given the context of the emergence and entry into force of the New Civil Code, obviously, the provisions of the Romanian Civil Code shall apply in addition, where the international convention lacks. Therefore, in order to apply the logic of the provisions of the Civil Code in full compliance with the international standards, though giving priority to the latter rules, a rigorous analysis is required, analysis which becomes more complex given the fact that, in accordance with Art. 230 of Law no. 71/2011 to implement Law no. 287/2009 on the Civil Code, Book II "About Maritime Trade and Sailing" of the Commercial Code, will be abolished upon the entry into force of the Maritime Code, as those provisions remain in force, being applied with priority to the rules of the Civil Code.

Design rules for vertical interconnections by reverse offset printing

Science.gov (United States)

Kusaka, Yasuyuki; Kanazawa, Shusuke; Ushijima, Hirobumi

2018-03-01

Formation of vertical interconnections by reverse offset printing was investigated, particularly focusing on the transfer step, in which an ink pattern is transferred from a polydimethylsiloxane (PDMS) sheet for the step coverage of contact holes. We systematically examined the coverage of contact holes made of a tapered photoresist layer by varying the hole size, the hole depth, PDMS elasticity, PDMS thickness, printing speed, and printing indentation depth. Successful ink filling was achieved when the PDMS was softer, and the optimal PDMS thickness varied depending on the size of the contact holes. This behaviour is related to the bell-type uplift deformation of incompressible PDMS, which can be described by contact mechanics numerical simulations. Based on direct observation of PDMS/resist-hole contact behaviour, the step coverage of contact holes typically involves two steps of contact area growth: (i) the PDMS first touches the bottom of the holes and then (ii) the contact area gradually and radially widens toward the tapered sidewall. From an engineering perspective, it is pointed out that mechanical synchronisation mismatch in the roll-to-sheet type printing invokes the cracking of ink layers at the edges of contact holes. According to the above design rule, ink filling into a contact hole with thickness of 2.5 µm and radius of 10 µm was achieved. Contact chain patterns with 1386 points of vertical interconnections with the square hole size of up to 10 µm successfully demonstrated the validity of the technique presented herein.

Simulation-based optimization for product and process design

NARCIS (Netherlands)

Driessen, L.

2006-01-01

The design of products and processes has gradually shifted from a purely physical process towards a process that heavily relies on computer simulations (virtual prototyping). To optimize this virtual design process in terms of speed and final product quality, statistical methods and mathematical

Systematic Integrated Process Design and Control of Binary Element Reactive Distillation Processes

DEFF Research Database (Denmark)

Mansouri, Seyed Soheil; Sales-Cruz, Mauricio; Huusom, Jakob Kjøbsted

2016-01-01

In this work, integrated process design and control of reactive distillation processes is considered through a computer-aided framework. First, a set of simple design methods for reactive distillation column that are similar in concept to non-reactive distillation design methods are extended...... to design-control of reactive distillation columns. These methods are based on the element concept where the reacting system of compounds is represented as elements. When only two elements are needed to represent the reacting system of more than two compounds, a binary element system is identified....... It is shown that the same design-control principles that apply to a non-reacting binary system of compounds are also valid for a reactive binary system of elements for distillation columns. Application of this framework shows that designing the reactive distillation process at the maximum driving force...

  Border Carbon Adjustments, the UNFCCC and WTO Rules

DEFF Research Database (Denmark)

Nielsen, Laura

2010-01-01

  My presentation on Trade and Climate Change concludes that border carbon adjustments can be consistent with both the climate change and WTO rules - depending of course on their design - but that they are not necessarily attractive. ......  My presentation on Trade and Climate Change concludes that border carbon adjustments can be consistent with both the climate change and WTO rules - depending of course on their design - but that they are not necessarily attractive. ...

The rules of unruly product design

NARCIS (Netherlands)

Eggink, Wouter; Roozenburg, N.; Chen, L.L.; Stappers, P.J.

2011-01-01

This paper is part of a research into the history of unruly design, which aims at finding theoretical background for the design of everyday things in a postmodern society. Unruly design is defined in this research as: all objects that are designed with the intention to undermine the existing

Process design (exterior – interior design)

OpenAIRE

Sandeva, Vaska; Despot, Katerina

2013-01-01

The design is a complex process of spatial organization and creative problem object. It switched to the study of complex natural conditions (analysis and evaluation) and the development of compositional solution structure of the object. Construction and shaping of all buildings whether it is exterior or interior, be it street, Square apartment building, park or greater forest massif, public facility (administrative buildings, hospitals, schools, galleries etc.), residential object (garsion...

Design of remote handled process assemblies for the process facility modifications project

International Nuclear Information System (INIS)

Smets, J.L.; Ajifu, D.A.

1987-01-01

The modular design philosophy for the process facility modification project utilizes an integrated design of components to facilitate operations and maintenance of nuclear fuel reprocessing equipment in a hot cell environment. The utilization of a matrix of remoteable base frames combines with process equipment designed as remote assemblies and sub-assemblies has simplified the overall design. Modularity will allow future flexibility while providing advantages for construction and maintenance in the initial installation

Facilitating Teamwork in the Design Process

DEFF Research Database (Denmark)

Bang, Anne Louise; Nissen, Kirsten

2009-01-01

By approaching the Repertory Grid as an exploratory design game and drawing on insight in diagrammatic reasoning we argue that this approach is useful in supporting team work in the design process. In this paper we draw on two courses inviting textile design students to contribute to the developm...

REVERSING THE CO-DESIGN PROCESS

DEFF Research Database (Denmark)

Lundsgaard, Christina

2011-01-01

a traditional codesign process the POE looks back on the process in order to adjust or redesign the building. The paper argues that co-design tools can be an instrument to make architects and other stakeholders reflect on the project once again in order to see it from a different perspective....

Sum rules in classical scattering

International Nuclear Information System (INIS)

Bolle, D.; Osborn, T.A.

1981-01-01

This paper derives sum rules associated with the classical scattering of two particles. These sum rules are the analogs of Levinson's theorem in quantum mechanics which provides a relationship between the number of bound-state wavefunctions and the energy integral of the time delay of the scattering process. The associated classical relation is an identity involving classical time delay and an integral over the classical bound-state density. We show that equalities between the Nth-order energy moment of the classical time delay and the Nth-order energy moment of the classical bound-state density hold in both a local and a global form. Local sum rules involve the time delay defined on a finite but otherwise arbitrary coordinate space volume S and the bound-state density associated with this same region. Global sum rules are those that obtain when S is the whole coordinate space. Both the local and global sum rules are derived for potentials of arbitrary shape and for scattering in any space dimension. Finally the set of classical sum rules, together with the known quantum mechanical analogs, are shown to provide a unified method of obtaining the high-temperature expansion of the classical, respectively the quantum-mechanical, virial coefficients

Design variables and constraints in fashion store design processes

DEFF Research Database (Denmark)

Haug, Anders; Borch Münster, Mia

2015-01-01

is to identify the most important store design variables, organise these variables into categories, understand the design constraints between categories, and determine the most influential stakeholders. Design/methodology/approach: – Based on a discussion of existing literature, the paper defines a framework...... into categories, provides an understanding of constraints between categories of variables, and identifies the most influential stakeholders. The paper demonstrates that the fashion store design task can be understood through a system perspective, implying that the store design task becomes a matter of defining......Purpose: – Several frameworks of retail store environment variables exist, but as shown by this paper, they are not particularly well-suited for supporting fashion store design processes. Thus, in order to provide an improved understanding of fashion store design, the purpose of this paper...

Lot-Order Assignment Applying Priority Rules for the Single-Machine Total Tardiness Scheduling with Nonnegative Time-Dependent Processing Times

Directory of Open Access Journals (Sweden)

Jae-Gon Kim

2015-01-01

Full Text Available Lot-order assignment is to assign items in lots being processed to orders to fulfill the orders. It is usually performed periodically for meeting the due dates of orders especially in a manufacturing industry with a long production cycle time such as the semiconductor manufacturing industry. In this paper, we consider the lot-order assignment problem (LOAP with the objective of minimizing the total tardiness of the orders with distinct due dates. We show that we can solve the LOAP optimally by finding an optimal sequence for the single-machine total tardiness scheduling problem with nonnegative time-dependent processing times (SMTTSP-NNTDPT. Also, we address how the priority rules for the SMTTSP can be modified to those for the SMTTSP-NNTDPT to solve the LOAP. In computational experiments, we discuss the performances of the suggested priority rules and show the result of the proposed approach outperforms that of the commercial optimization software package.

78 FR 45551 - Rebuild by Design-Competition and Registration

Science.gov (United States)

2013-07-29

.... Design Teams will engage with local political leadership in order to identify specific sites and... successfully working through a public process. 3. Clarity, style, and thoroughness of proposal Rules and...

Integrating rock mechanics issues with repository design through design process principles and methodology

International Nuclear Information System (INIS)

Bieniawski, Z.T.

1996-01-01

A good designer needs not only knowledge for designing (technical know-how that is used to generate alternative design solutions) but also must have knowledge about designing (appropriate principles and systematic methodology to follow). Concepts such as open-quotes design for manufactureclose quotes or open-quotes concurrent engineeringclose quotes are widely used in the industry. In the field of rock engineering, only limited attention has been paid to the design process because design of structures in rock masses presents unique challenges to the designers as a result of the uncertainties inherent in characterization of geologic media. However, a stage has now been reached where we are be able to sufficiently characterize rock masses for engineering purposes and identify the rock mechanics issues involved but are still lacking engineering design principles and methodology to maximize our design performance. This paper discusses the principles and methodology of the engineering design process directed to integrating site characterization activities with design, construction and performance of an underground repository. Using the latest information from the Yucca Mountain Project on geology, rock mechanics and starter tunnel design, the current lack of integration is pointed out and it is shown how rock mechanics issues can be effectively interwoven with repository design through a systematic design process methodology leading to improved repository performance. In essence, the design process is seen as the use of design principles within an integrating design methodology, leading to innovative problem solving. In particular, a new concept of open-quotes Design for Constructibility and Performanceclose quotes is introduced. This is discussed with respect to ten rock mechanics issues identified for repository design and performance

Rule-violations sensitise towards negative and authority-related stimuli.

Science.gov (United States)

Wirth, Robert; Foerster, Anna; Rendel, Hannah; Kunde, Wilfried; Pfister, Roland

2018-05-01

Rule violations have usually been studied from a third-person perspective, identifying situational factors that render violations more or less likely. A first-person perspective of the agent that actively violates the rules, on the other hand, is only just beginning to emerge. Here we show that committing a rule violation sensitises towards subsequent negative stimuli as well as subsequent authority-related stimuli. In a Prime-Probe design, we used an instructed rule-violation task as the Prime and a word categorisation task as the Probe. Also, we employed a control condition that used a rule inversion task as the Prime (instead of rule violations). Probe targets were categorised faster after a violation relative to after a rule-based response if they related to either, negative valence or authority. Inversions, however, primed only negative stimuli and did not accelerate the categorisation of authority-related stimuli. A heightened sensitivity towards authority-related targets thus seems to be specific to rule violations. A control experiment showed that these effects cannot be explained in terms of semantic priming. Therefore, we propose that rule violations necessarily activate authority-related representations that make rule violations qualitatively different from simple rule inversions.

On nonstationarity-related errors in modal combination rules of the response spectrum method

Science.gov (United States)

Pathak, Shashank; Gupta, Vinay K.

2017-10-01

Characterization of seismic hazard via (elastic) design spectra and the estimation of linear peak response of a given structure from this characterization continue to form the basis of earthquake-resistant design philosophy in various codes of practice all over the world. Since the direct use of design spectrum ordinates is a preferred option for the practicing engineers, modal combination rules play central role in the peak response estimation. Most of the available modal combination rules are however based on the assumption that nonstationarity affects the structural response alike at the modal and overall response levels. This study considers those situations where this assumption may cause significant errors in the peak response estimation, and preliminary models are proposed for the estimation of the extents to which nonstationarity affects the modal and total system responses, when the ground acceleration process is assumed to be a stationary process. It is shown through numerical examples in the context of complete-quadratic-combination (CQC) method that the nonstationarity-related errors in the estimation of peak base shear may be significant, when strong-motion duration of the excitation is too small compared to the period of the system and/or the response is distributed comparably in several modes. It is also shown that these errors are reduced marginally with the use of the proposed nonstationarity factor models.

Optimal control of a CSTR process

Directory of Open Access Journals (Sweden)

A. Soukkou

2008-12-01

Full Text Available Designing an effective criterion and learning algorithm for find the best structure is a major problem in the control design process. In this paper, the fuzzy optimal control methodology is applied to the design of the feedback loops of an Exothermic Continuous Stirred Tank Reactor system. The objective of design process is to find an optimal structure/gains of the Robust and Optimal Takagi Sugeno Fuzzy Controller (ROFLC. The control signal thus obtained will minimize a performance index, which is a function of the tracking/regulating errors, the quantity of the energy of the control signal applied to the system, and the number of fuzzy rules. The genetic learning is proposed for constructing the ROFLC. The chromosome genes are arranged into two parts, the binary-coded part contains the control genes and the real-coded part contains the genes parameters representing the fuzzy knowledge base. The effectiveness of this chromosome formulation enables the fuzzy sets and rules to be optimally reduced. The performances of the ROFLC are compared to these found by the traditional PD controller with Genetic Optimization (PD_GO. Simulations demonstrate that the proposed ROFLC and PD_GO has successfully met the design specifications.

Rule-governed behavior and behavioral anthropology.

Science.gov (United States)

Malott, R W

1988-01-01

According to cultural materialism, cultural practices result from the materialistic outcomes of those practices, not from sociobiological, mentalistic, or mystical predispositions (e.g., Hindus worship cows because, in the long run, that worship results in more food, not less food). However, according to behavior analysis, such materialistic outcomes do not reinforce or punish the cultural practices, because such outcomes are too delayed, too improbable, or individually too small to directly reinforce or punish the cultural practices (e.g., the food increase is too delayed to reinforce the cow worship). Therefore, the molar, materialistic contingencies need the support of molecular, behavioral contingencies. And according to the present theory of rule-governed behavior, the statement of rules describing those molar, materialistic contingencies can establish the needed molecular contingencies. Given the proper behavioral history, such rule statements combine with noncompliance to produce a learned aversive condition (often labeled fear, anxiety, or guilt). The termination of this aversive condition reinforces compliance, just as its presentation punishes noncompliance (e.g., the termination of guilt reinforces the tending to a sick cow). In addition, supernatural rules often supplement these materialistic rules. Furthermore, the production of both materialistic and supernatural rules needs cultural designers who understand the molar, materialistic contingencies.

Sum rules in the response function method

International Nuclear Information System (INIS)

Takayanagi, Kazuo

1990-01-01

Sum rules in the response function method are studied in detail. A sum rule can be obtained theoretically by integrating the imaginary part of the response function over the excitation energy with a corresponding energy weight. Generally, the response function is calculated perturbatively in terms of the residual interaction, and the expansion can be described by diagrammatic methods. In this paper, we present a classification of the diagrams so as to clarify which diagram has what contribution to which sum rule. This will allow us to get insight into the contributions to the sum rules of all the processes expressed by Goldstone diagrams. (orig.)

Involving business users in business rules lifecycle

OpenAIRE

Thorževskij, Sašo

2010-01-01

Organizations operate in dynamic environments, which require continuous modifications of business policies. The latter also implies changes in business informatics, the basis for effective and prosperous operation. To answer to the constant need for modifications and adaptations, a new approach to information systems design and implementation has been developed, based on separating business rules from the rest of the information system. In such solutions, business rule execution is entrusted ...

Definition of Business Rules Using Business Vocabulary and Semantics

Directory of Open Access Journals (Sweden)

Roman Hypský

2017-12-01

Full Text Available This paper discusses the definition of business rules using business vocabulary and semantics. At the beginning business rules, business vocabulary and semantics of business rules are specified. There is also outlined the current state of research on this topic. Then the definition and formalization of business rules using semantics and business vocabulary is described. Based on these proposed procedures was created a tool that implements and simulate these processes. The main advantage of this tool is “Business Rules Layer”, which implements business rules into the system but is separated from this system. Source code of the rules and the system are not mixed together. Finally, the results are evaluated and future development is suggested.

32 CFR 536.51 - Collateral source rule.

Science.gov (United States)

2010-07-01

... 32 National Defense 3 2010-07-01 2010-07-01 true Collateral source rule. 536.51 Section 536.51... AGAINST THE UNITED STATES Investigation and Processing of Claims § 536.51 Collateral source rule. Where permitted by applicable state or maritime law, damages recovered from collateral sources are payable under...

THE RULE OF TRANSPARENCY: as an element of democratization in the journalism production process

Directory of Open Access Journals (Sweden)

Marta Regina Maia

2008-12-01

Full Text Available This article´s purpose is to discuss the need for improving theknowledge of readers, listeners, TV spectators and people whouse the Internet, mainly of the information process, focusing onthe communication media in Brazil. Among the possibilities, itis important to understand information production behind thescenes, which is possible with a Rule of Transparency, one of theintellectual principles of the science of reporting called “Disciplineof Verification” by journalists Bill Kovach and Tom Rosenstiel. The existence of a place that officially relates the making of, through books, blogs, or other means of communication, contributes to the democratization of the access to the process used by journalists who are most of the time unable to speak out and publish their ideas because of the editorial demands or even due to the lack of time and space.

A C++ Class for Rule-Base Objects

Directory of Open Access Journals (Sweden)

William J. Grenney

1992-01-01

Full Text Available A C++ class, called Tripod, was created as a tool to assist with the development of rule-base decision support systems. The Tripod class contains data structures for the rule-base and member functions for operating on the data. The rule-base is defined by three ASCII files. These files are translated by a preprocessor into a single file that is located when a rule-base object is instantiated. The Tripod class was tested as part of a proto-type decision support system (DSS for winter highway maintenance in the Intermountain West. The DSS is composed of two principal modules: the main program, called the wrapper, and a Tripod rule-base object. The wrapper is a procedural module that interfaces with remote sensors and an external meterological database. The rule-base contains the logic for advising an inexperienced user and for assisting with the decision making process.

Creativity Processes of Students in the Design Studio

Science.gov (United States)

Huber, Amy Mattingly; Leigh, Katharine E.; Tremblay, Kenneth R., Jr.

2012-01-01

The creative process is a multifaceted and dynamic path of thinking required to execute a project in design-based disciplines. The goal of this research was to test a model outlining the creative design process by investigating student experiences in a design project assignment. The study used an exploratory design to collect data from student…

The OZI rule and nucleons

International Nuclear Information System (INIS)

Lipkin, H.J.

1991-11-01

The title of this lecture series raises two questions: (1) what is the OZI rule? (2) what is a nucleon. In the lectures both questions were addressed in parallel and the material moved back and forth between them. In a written version it seems more appropriate to treat the two question separately, begining with trying to understand the structure of the nucleon. Experimental evidence for the symmetry and quark structure of hadrons is reviewed with a historical introduction and updated by presenting constituent quark model relation for hadron masses and magnetic moments.Three definitions of the OZI rule are presented, all which forbid decay like φ->ρπ but making different selection rules for more complicate reactions. All suffer from the higer order paradox that a forbidden process can take place via two-step transition in which each step is allowed; e.g. φ-> KK-bar -> ρπ. No prescription is given for estimating the strength of forbidden processes. The role of cancellations between different higer order diagrams is discussed. (author)

Ensemble learning with trees and rules: supervised, semi-supervised, unsupervised

Science.gov (United States)

In this article, we propose several new approaches for post processing a large ensemble of conjunctive rules for supervised and semi-supervised learning problems. We show with various examples that for high dimensional regression problems the models constructed by the post processing the rules with ...

The codification of the design and construction rules in nuclear industry ensuring its success in France and for French export activity

International Nuclear Information System (INIS)

Boiron, P.; Menjon, G.

1980-10-01

The codification of the design and construction rules (DCR) for nuclear power stations is presented. In part I, The DCR codifying undertaking is explained. In part II, the DCR-M is presented as is also the significant change that its application entails in contractual practice and the application of the regulations [fr

Optimizing human-system interface automation design based on a skill-rule-knowledge framework

International Nuclear Information System (INIS)

Lin, Chiuhsiang Joe; Yenn, T.-C.; Yang, C.-W.

2010-01-01

This study considers the technological change that has occurred in complex systems within the past 30 years. The role of human operators in controlling and interacting with complex systems following the technological change was also investigated. Modernization of instrumentation and control systems and components leads to a new issue of human-automation interaction, in which human operational performance must be considered in automated systems. The human-automation interaction can differ in its types and levels. A system design issue is usually realized: given these technical capabilities, which system functions should be automated and to what extent? A good automation design can be achieved by making an appropriate human-automation function allocation. To our knowledge, only a few studies have been published on how to achieve appropriate automation design with a systematic procedure. Further, there is a surprising lack of information on examining and validating the influences of levels of automation (LOAs) on instrumentation and control systems in the advanced control room (ACR). The study we present in this paper proposed a systematic framework to help in making an appropriate decision towards types of automation (TOA) and LOAs based on a 'Skill-Rule-Knowledge' (SRK) model. From the evaluating results, it was shown that the use of either automatic mode or semiautomatic mode is insufficient to prevent human errors. For preventing the occurrences of human errors and ensuring the safety in ACR, the proposed framework can be valuable for making decisions in human-automation allocation.

78 FR 8217 - Social Security Ruling, SSR 13-1p; Titles II and XVI: Agency Processes for Addressing Allegations...

Science.gov (United States)

2013-02-05

... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA-2012-0071] Social Security Ruling, SSR 13-1p; Titles II and XVI: Agency Processes for Addressing Allegations of Unfairness, Prejudice, Partiality, Bias... the third column, the fourth line under the ``Summary'' heading, change ``SSR-13-Xp'' to ``SSR-13-1p...

Safety rule evolution for future LMFBRs

International Nuclear Information System (INIS)

Justin, F.; Wiesner

1986-06-01

After safety rules for operating reactors and for built reactors in France and Germany, this report presents the main points of the safety rules for future reactors. It is generally agreed that future LMFBRs will have to show the same safety level as other commercial nuclear power plants. The demonstration is to be partly based on deterministic criteria, or ''safety rules'', and partly on risk considerations, for rare events. In that respect, a high effort on preventive measures, especially to reinforce the reliability of essential safety functions (shutdown, decay heat removal) could be sufficient, if all conditions are considered. So the containment of a hypothetical core disruptive accident is no longer required. Nevertheless, low probability events gave some feedback on the SPX.2 design

The design process and the use of computerized tools in control room design

International Nuclear Information System (INIS)

Wahlstroem, B.; Heinonen, R.; Ranta, J.; Haarla, J.

1985-09-01

Control room design has proven an important component when the safety and availability of a complex industrial process plant are considered. Many control room deficiencies can be traced back to oversights and other errors during the design process. The introduction of powerful computers and software for computer-aided design (CAD) offers one possibility when tools for improving the quality of design are being selected. The report gives a broad assessment of problems of design and the benefits of using computer-aided design. One proposal for a structure of a computer-aided design system is considered in more detail. In this system special emphasis has been laid on dealing with requirements during design process. A demonstration system has been built and sample system user dialogues are described. The report is the final report of the LIT3.1 project of the Nordic cooperation on human reliability in the energy production field. (author)

Integrated Design Process in Problem-Based Learning

DEFF Research Database (Denmark)

Knudstrup, Mary-Ann

2004-01-01

This article reports and reflects on the learning achievements and the educational experiences in connection with the first years of the curriculum in Architecture at Aalborg University ?s Civil Engineer Education in Architecture & Design. In the article I will focus on the learning activity and ...... the students need in order to concentrate, mobilize creativity and find the personal design language which is a precondition for making good architecture....... and the method that are developed during the semester when working with an Integrated Design Process combining architecture, design, functional aspects, energy consumption, indoor environment, technology, and construction. I will emphasize the importance of working with different tools in the design process, e...

The molecular basis of speciation: from patterns to processes, rules ...

Indian Academy of Sciences (India)

male; large X-effect; meiotic drive; genomic conflict. Abstract. The empirical study of speciation has brought us closer to unlocking the origins of life's vast diversity. By examining recently formed species, a number of general patterns, or rules, ...

Application of core structural design guidelines in conceptual fuel pin design

International Nuclear Information System (INIS)

Patel, M.R.; Stephen, J.D.

1979-01-01

The paper describes an application of the Draft RDT Standards F9-7, -8, and -9 to conceptual design of Fast Breeder Reactor (FBR) fuel pins. The Standards are being developed to provide guidelines for structural analysis and design of the FBR core components which have limited ductility at high fluences and are not addressed by the prevalent codes. The development is guided by a national working group sponsored by the Division of Reactor Researcch and Technology of the Department of Energy. The development program summarized in the paper includes establishment of design margins consistent with the test data and component performance requirements, and application of the design rules in various design activities. The application program insures that the quantities required for proper application of the design rules are available from the analysis methods and test data, and that the use of the same design rules in different analysis tools used at different stages of a component design producees consistent results. This is illustrated in the paper by application of the design rules in the analysis methods developed for conceptual and more detailed designs of an FBR fuel pin

THEORETICAL FRAMES FOR DESIGNING REVERSE LOGISTICS PROCESSES

OpenAIRE

Janusz K. Grabara; Sebastian Kot

2009-01-01

Logistics processes of return flow became more and more important in present business practice. Because of better customer satisfaction, environmental and financial aspects many enterprises deal with reverse logistics performance. The paper is a literature review focused on the design principles of reverse logistics processes Keywords: reverse logistics, designing.

Knowledge and Processes in Design. DPS Final Report.

Science.gov (United States)

Pirolli, Peter

Four papers from a project concerning information-processing characterizations of the knowledge and processes involved in design are presented. The project collected and analyzed verbal protocols from instructional designers, architects, and mechanical engineers. A framework was developed for characterizing the problem spaces of design that…

describing a collaborative clothing design process between

African Journals Online (AJOL)

user

ISSN 0378-5254 Journal of Family Ecology and Consumer Sciences, Vol 43, 2015. Designing success: describing a ... PROCESS BETWEEN APPRENTICE DESIGNERS AND EXPERT DESIGN .... 5 Evaluation and decisions. (a) Outcomes.