32 CFR 1904.3 - Procedures governing acceptance of service of process.

Science.gov (United States)

2010-07-01

... INTELLIGENCE AGENCY PROCEDURES GOVERNING ACCEPTANCE OF SERVICE OF PROCESS § 1904.3 Procedures governing acceptance of service of process. (a) Service of Process Upon the CIA or a CIA Employee in An Official..., personal service of process may be accepted only by attorneys of the Office of General Counsel at CIA...

32 CFR 1702.3 - Procedures governing acceptance of service of process.

Science.gov (United States)

2010-07-01

... THE DIRECTOR OF NATIONAL INTELLIGENCE PROCEDURES GOVERNING THE ACCEPTANCE OF SERVICE OF PROCESS § 1702.3 Procedures governing acceptance of service of process. (a) Service of process upon the ODNI or an... authorized by the General Counsel, personal service of process upon the ODNI or an ODNI employee in the...

38 CFR 36.4350 - Servicing procedures for holders.

Science.gov (United States)

2010-07-01

... and counseling delinquent borrowers to advise borrowers how to cure delinquencies, protect their...) Procedural guidelines for individual analysis of each delinquency; (4) Instructions and appropriate controls... servicing histories and evaluating repayment proposals; (5) Management review procedures for evaluating...

38 CFR 36.4318 - Servicer tier ranking-temporary procedures.

Science.gov (United States)

2010-07-01

... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Servicer tier ranking... § 36.4318 Servicer tier ranking—temporary procedures. (a) The Secretary shall assign to each servicer a “Tier Ranking” based upon the servicer's performance in servicing guaranteed loans. There shall be four...

Requirements Engineering for Pervasive Services

NARCIS (Netherlands)

Kolos, L.; Poulisse, Gert-Jan; van Eck, Pascal; Videira lopes, C.; Schaefer, S.; Clarke, S.; Elrad, T.; Jahnke, J.

2005-01-01

Developing pervasive mobile services for a mass market of end customers entails large up-front investments and therefore a good understanding of customer requirements is of paramount importance. This paper presents an approach for developing requirements engineering method that takes distinguishing

Advances in through-life engineering services

CERN Document Server

Roy, Rajkumar; Shaw, Andy

2017-01-01

This edited book offers further advances, new perspectives, and developments from world leaders in the field of through-life engineering services (TES). It builds up on the earlier book by the same authors entitled: “Through-life Engineering Services: Motivation, Theory and Practice.” This compendium introduces and discusses further, the developments in workshop-based and 'in situ' maintenance and support of high-value engineering products, as well as the application of drone technology for autonomous and self-healing product support. The links between ‘integrated planning’ and planned obsolescence, risk and cost modelling are also examined. The role of data, information, and knowledge management relative to component and system degradation and failure is also presented. This is supported by consideration of the effects upon the maintenance and support decision by the presence of 'No Fault Found' error signals within system data. Further to this the role of diagnostics and prognostics is also discusse...

40 CFR 1051.501 - What procedures must I use to test my vehicles or engines?

Science.gov (United States)

2010-07-01

... vehicles or engines? 1051.501 Section 1051.501 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES Test Procedures § 1051.501 What procedures must I use to test my vehicles or engines? This section describes test...

Correction of engineering servicing regularity of transporttechnological machines in operational process

Science.gov (United States)

Makarova, A. N.; Makarov, E. I.; Zakharov, N. S.

2018-03-01

In the article, the issue of correcting engineering servicing regularity on the basis of actual dependability data of cars in operation is considered. The purpose of the conducted research is to increase dependability of transport-technological machines by correcting engineering servicing regularity. The subject of the research is the mechanism of engineering servicing regularity influence on reliability measure. On the basis of the analysis of researches carried out before, a method of nonparametric estimation of car failure measure according to actual time-to-failure data was chosen. A possibility of describing the failure measure dependence on engineering servicing regularity by various mathematical models is considered. It is proven that the exponential model is the most appropriate for that purpose. The obtained results can be used as a separate method of engineering servicing regularity correction with certain operational conditions taken into account, as well as for the technical-economical and economical-stochastic methods improvement. Thus, on the basis of the conducted researches, a method of engineering servicing regularity correction of transport-technological machines in the operational process was developed. The use of that method will allow decreasing the number of failures.

[The Engineering and Technical Services Directorate at the Glenn Research Center

Science.gov (United States)

Moon, James

2004-01-01

My name is James Moon and I am a senior at Tennessee State University where my major is Aeronautical and Industrial Technology with a concentration in industrial electronics. I am currently serving my internship in the Engineering and Technical Services Directorate at the Glenn Research Center (GRC). The Engineering and Technical Service Directorate provides the services and infrastructure for the Glenn Research Center to take research concepts to reality. They provide a full range of integrated services including engineering, advanced prototyping and testing, facility management, and information technology for NASA, industry, and academia. Engineering and Technical Services contains the core knowledge in Information Technology (IT). This includes data systems and analysis, inter and intranet based systems design and data security. Including the design and development of embedded real-time s o h a r e applications for flight and supporting ground systems, Engineering and Technical Services provide a wide range of IT services and products specific to the Glenn Research Center research and engineering community. In the 7000 Directorate I work directly in the 7611 organization. This organization is known as the Aviation Environments Technical Branch. My mentor is Vincent Satterwhite who is also the Branch Chief of the Aviation Environments Technical Branch. In this branch, I serve as the Assistant program manager of the Engineering Technology Program. The Engineering Technology Program (ETP) is one of three components of the High School L.E.R.C.I.P. This is an Agency-sponsored, eight-week research-based apprenticeship program designed to attract traditionally underrepresented high school students that demonstrate an aptitude for and interest in mathematics, science, engineering, and technology.

Systems engineering implementation plan for the liquid effluents services program

International Nuclear Information System (INIS)

Lowe, S.S.

1995-01-01

A graded approach is being taken by the Liquid Effluents Services Program in implementing systems engineering because of the advanced state of the program. The approach is cost-effective and takes credit for related work already completed, yet retains the benefits of systems engineering. This plan describes how the Liquid Effluents Services Program will implement systems engineering so there is a common understanding. Systems engineering work to be performed and the products of that work are identified. The relation to the current planning process and integration with the sitewide systems engineering effort is described

49 CFR Appendix B to Part 599 - Engine Disablement Procedures for the CARS Program

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Engine Disablement Procedures for the CARS Program B Appendix B to Part 599 Transportation Other Regulations Relating to Transportation (Continued...—Engine Disablement Procedures for the CARS Program ER29JY09.006 ...

ITER diagnostics ex-vessel engineering services

Energy Technology Data Exchange (ETDEWEB)

Arumugam, A.P., E-mail: arun.prakash@iter.org; Walker, C.I.; Andrew, P.; Barnsley, R.; Beltran, D.; Bertalot, L.; Dammann, A.; Direz, M.F.; Drevon, J.M.; Encheva, A.; Giacomin, T.; Hourtoule, J.; Kuehn, I.; Lanza, R.; Levesy, B.; Maquet, P.; Patel, K.M.; Patisson, L.; Pitcher, C.S.; Portales, M.; and others

2013-10-15

Highlights: • This paper describes about the ITER diagnostics ex-vessel engineering services. • It describes various diagnostics systems, its location and its environment. • Diagnostics interfaces with other services such as the buildings, HVAC, electrical services, cooling water, vacuum, liquid and gas distribution. • All the interfaces with these services are identified and defined. • Buildings services for diagnostics, such as penetrations, local shielding, embedment and temperature control are discussed. -- Abstract: Extensive diagnostics systems will be installed on the ITER machine to provide the measurements necessary to control, evaluate and optimize plasma performance in ITER and to further the understanding of plasma physics. These include measurements of temperature, density, impurity concentration, and particle and energy confinement times. ITER diagnostic systems extend from the center of the Tokamak to the various diagnostic areas, where they are controlled and acquired data is processed. This mainly includes the areas such as ports, port cells, gallery, diagnostics enclosures and cubicle areas. The diagnostics port plugs encloses the front end of the diagnostic systems and the diagnostics building houses the diagnostics equipment, instrumentation and control cubicles. There are several systems providing services to diagnostics. These mainly include ITER buildings, electrical power services, cooling water services, Heating Ventilation and Air Conditioning (HVAC), vacuum services, liquid and gas distribution services, cable engineering, de-tritiation systems, control cubicles, etc. Requirements of these service systems have to be defined, even though many of the diagnostics are at an early stage of development. It is a real challenge to define and to design diagnostics systems considering the constraints imposed by these service systems. This paper summarizes the provision of these services to the individual diagnostics and diagnostics areas

ITER diagnostics ex-vessel engineering services

International Nuclear Information System (INIS)

Arumugam, A.P.; Walker, C.I.; Andrew, P.; Barnsley, R.; Beltran, D.; Bertalot, L.; Dammann, A.; Direz, M.F.; Drevon, J.M.; Encheva, A.; Giacomin, T.; Hourtoule, J.; Kuehn, I.; Lanza, R.; Levesy, B.; Maquet, P.; Patel, K.M.; Patisson, L.; Pitcher, C.S.; Portales, M.

2013-01-01

Highlights: • This paper describes about the ITER diagnostics ex-vessel engineering services. • It describes various diagnostics systems, its location and its environment. • Diagnostics interfaces with other services such as the buildings, HVAC, electrical services, cooling water, vacuum, liquid and gas distribution. • All the interfaces with these services are identified and defined. • Buildings services for diagnostics, such as penetrations, local shielding, embedment and temperature control are discussed. -- Abstract: Extensive diagnostics systems will be installed on the ITER machine to provide the measurements necessary to control, evaluate and optimize plasma performance in ITER and to further the understanding of plasma physics. These include measurements of temperature, density, impurity concentration, and particle and energy confinement times. ITER diagnostic systems extend from the center of the Tokamak to the various diagnostic areas, where they are controlled and acquired data is processed. This mainly includes the areas such as ports, port cells, gallery, diagnostics enclosures and cubicle areas. The diagnostics port plugs encloses the front end of the diagnostic systems and the diagnostics building houses the diagnostics equipment, instrumentation and control cubicles. There are several systems providing services to diagnostics. These mainly include ITER buildings, electrical power services, cooling water services, Heating Ventilation and Air Conditioning (HVAC), vacuum services, liquid and gas distribution services, cable engineering, de-tritiation systems, control cubicles, etc. Requirements of these service systems have to be defined, even though many of the diagnostics are at an early stage of development. It is a real challenge to define and to design diagnostics systems considering the constraints imposed by these service systems. This paper summarizes the provision of these services to the individual diagnostics and diagnostics areas

Business aspects and cost advantages of partnering for fossil engineering services

International Nuclear Information System (INIS)

Featham, M.D.; Sensenig, R.G.

1995-01-01

In today's environment where utility companies are attempting to reduce costs, alternative cost competitive approaches are being adopted to traditional fossil power plant engineering. One approach is to utilize Partnering of multiple organizations to provide cost competitive and quality engineering services. An approach to Partnering that involves Florida Power Corporation Partnering with multiple architect/engineers to provide the fossil plant engineering services is described in this paper

76 FR 58155 - Defense Federal Acquisition Regulation Supplement; Construction and Architect-Engineer Services...

Science.gov (United States)

2011-09-20

... Federal Acquisition Regulation Supplement; Construction and Architect-Engineer Services Performance... performance evaluations for construction and architect-engineer services. DATES: Effective Date: September 20... past performance for construction and Architect- Engineer services. On April 19, 2011, DoD published a...

Model-driven Service Engineering with SoaML

Science.gov (United States)

Elvesæter, Brian; Carrez, Cyril; Mohagheghi, Parastoo; Berre, Arne-Jørgen; Johnsen, Svein G.; Solberg, Arnor

This chapter presents a model-driven service engineering (MDSE) methodology that uses OMG MDA specifications such as BMM, BPMN and SoaML to identify and specify services within a service-oriented architecture. The methodology takes advantage of business modelling practices and provides a guide to service modelling with SoaML. The presentation is case-driven and illuminated using the telecommunication example. The chapter focuses in particular on the use of the SoaML modelling language as a means for expressing service specifications that are aligned with business models and can be realized in different platform technologies.

Service Engineering as an Approach to Designing Industrial Product Service Systems

OpenAIRE

Schuh, G.; Gudergan, G.

2009-01-01

Organised by: Cranfield University Unique customer solutions which integrate products and services into a high value offering have the potential to successfully differentiate from competition even prices are dictating product markets. However, companies face tremendous challenges to develop customer solutions. Service engineering is considered to be the scientific discipline which supports the design task of intangible offerings and thus a foundation for solution design. We enh...

22 CFR 228.39 - Special source rules for construction and engineering services.

Science.gov (United States)

2010-04-01

... engineering services. 228.39 Section 228.39 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT RULES ON SOURCE, ORIGIN AND NATIONALITY FOR COMMODITIES AND SERVICES FINANCED BY USAID Conditions Governing the... engineering services. Advanced developing countries, eligible under Geographic Code 941, which have attained a...

Research and development related to the services engineering

International Nuclear Information System (INIS)

Rembado, J. L.

2000-01-01

In the present paper it is clarified what is understood by the expression R and D, Research and Development in the Servicie Engineering's which support the nuclear power plants exploitation, being more appropriated to talk about Innovation and Technological Development. In this paper it is analysed the need to have an innovation as per the marketing needs and to have a technological development to maintain an independence to let us to keep and increase the company's activity. It is described how the Services Engineering's with technological development turn to equipment suppliers which can be supplied to the nuclear sector as well as to other industrial sectors. Finally, it is described the innovation and technological development evolution, the technological polities objectives and the action lines of Tecnatom, S. A. as a Services Engineering's. (Author)

Engineering Consultancy: An Assessment of IT-enabled International Delivery of Services

DEFF Research Database (Denmark)

Baark, Erik

1999-01-01

The delivery of engineering consultancy services in global markets has been dominated by a small group of firms located in Europe and the US. Like many other service industries, engineering consultants have depended on the movement of highly qualified people and establishment of local affiliates...... services in arms-length transactions across national borders does not appear to have been significantly exploited. Nevertheless, IT-enabled delivery of engineering consultancy services opens up possibilities for business process reengineering that may provide some firms new competitive advantages in global...... markets and lead to further integration of design and construction in partnerships or project consortia, or in the strengthening of design-build approaches in project execution....

Challenges faced by engineering services group in meeting nuclear power project targets

International Nuclear Information System (INIS)

Phanse, N.R.

2001-01-01

Nuclear Power Corporation of India Ltd. (NPCIL) is an organisation building and operating nuclear power stations for which a number of different types of engineering services/activities are necessary. All these services are provided by Engineering Services Group of NPCIL. The activities and responsibilities of the group are discussed

48 CFR 52.244-4 - Subcontractors and outside associates and consultants (Architect-engineer services).

Science.gov (United States)

2010-10-01

... associates and consultants (Architect-engineer services). 52.244-4 Section 52.244-4 Federal Acquisition... consultants (Architect-engineer services). As prescribed in 44.204(b), insert the following clause: Subcontractors and Outside Associates and Consultants (Architect-Engineer Services) (AUG 1998) Any subcontractors...

Virtual Reference Services through Web Search Engines: Study of Academic Libraries in Pakistan

Directory of Open Access Journals (Sweden)

Rubia Khan

2017-03-01

Full Text Available Web search engines (WSE are powerful and popular tools in the field of information service management. This study is an attempt to examine the impact and usefulness of web search engines in providing virtual reference services (VRS within academic libraries in Pakistan. The study also attempts to investigate the relevant expertise and skills of library professionals in providing digital reference services (DRS efficiently using web search engines. Methodology used in this study is quantitative in nature. The data was collected from fifty public and private sector universities in Pakistan using a structured questionnaire. Microsoft Excel and SPSS were used for data analysis. The study concludes that web search engines are commonly used by librarians to help users (especially research scholars by providing digital reference services. The study also finds a positive correlation between use of web search engines and quality of digital reference services provided to library users. It is concluded that although search engines have increased the expectations of users and are really big competitors to a library’s reference desk, they are however not an alternative to reference service. Findings reveal that search engines pose numerous challenges for librarians and the study also attempts to bring together possible remedial measures. This study is useful for library professionals to understand the importance of search engines in providing VRS. The study also provides an intellectual comparison among different search engines, their capabilities, limitations, challenges and opportunities to provide VRS effectively in libraries.

48 CFR 36.702 - Forms for use in contracting for architect-engineer services.

Science.gov (United States)

2010-10-01

... contracting for architect-engineer services. 36.702 Section 36.702 Federal Acquisition Regulations System FEDERAL ACQUISITION REGULATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Standard and Optional Forms for Contracting for Construction, Architect-Engineer Services, and...

Office-based deep sedation for pediatric ophthalmologic procedures using a sedation service model.

Science.gov (United States)

Lalwani, Kirk; Tomlinson, Matthew; Koh, Jeffrey; Wheeler, David

2012-01-01

Aims. (1) To assess the efficacy and safety of pediatric office-based sedation for ophthalmologic procedures using a pediatric sedation service model. (2) To assess the reduction in hospital charges of this model of care delivery compared to the operating room (OR) setting for similar procedures. Background. Sedation is used to facilitate pediatric procedures and to immobilize patients for imaging and examination. We believe that the pediatric sedation service model can be used to facilitate office-based deep sedation for brief ophthalmologic procedures and examinations. Methods. After IRB approval, all children who underwent office-based ophthalmologic procedures at our institution between January 1, 2000 and July 31, 2008 were identified using the sedation service database and the electronic health record. A comparison of hospital charges between similar procedures in the operating room was performed. Results. A total of 855 procedures were reviewed. Procedure completion rate was 100% (C.I. 99.62-100). There were no serious complications or unanticipated admissions. Our analysis showed a significant reduction in hospital charges (average of $1287 per patient) as a result of absent OR and recovery unit charges. Conclusions. Pediatric ophthalmologic minor procedures can be performed using a sedation service model with significant reductions in hospital charges.

Office-Based Deep Sedation for Pediatric Ophthalmologic Procedures Using a Sedation Service Model

Directory of Open Access Journals (Sweden)

Kirk Lalwani

2012-01-01

Full Text Available Aims. (1 To assess the efficacy and safety of pediatric office-based sedation for ophthalmologic procedures using a pediatric sedation service model. (2 To assess the reduction in hospital charges of this model of care delivery compared to the operating room (OR setting for similar procedures. Background. Sedation is used to facilitate pediatric procedures and to immobilize patients for imaging and examination. We believe that the pediatric sedation service model can be used to facilitate office-based deep sedation for brief ophthalmologic procedures and examinations. Methods. After IRB approval, all children who underwent office-based ophthalmologic procedures at our institution between January 1, 2000 and July 31, 2008 were identified using the sedation service database and the electronic health record. A comparison of hospital charges between similar procedures in the operating room was performed. Results. A total of 855 procedures were reviewed. Procedure completion rate was 100% (C.I. 99.62–100. There were no serious complications or unanticipated admissions. Our analysis showed a significant reduction in hospital charges (average of $1287 per patient as a result of absent OR and recovery unit charges. Conclusions. Pediatric ophthalmologic minor procedures can be performed using a sedation service model with significant reductions in hospital charges.

7 CFR 1753.18 - Engineer and architect contract closeout certifications.

Science.gov (United States)

2010-01-01

... 7 Agriculture 11 2010-01-01 2010-01-01 false Engineer and architect contract closeout... PROCEDURES Engineering Services § 1753.18 Engineer and architect contract closeout certifications. A... accordance with accepted professional engineering and architectural practice, by the engineer or architect...

APPLICATION FRAMEWORK IN ENGINEERING SERVICE ORIENTED ARCHITECTURE SYSTEM SERVICE

Directory of Open Access Journals (Sweden)

Ade Hodijah

2017-03-01

Full Text Available The Service Engineering (SE is understood as a framework to create innovative services in application development of information technology approach to Service Oriented Architecture (SOA. Implementing SOA is required methodology to identify services that can be used again in the application and organization of a company. in this research, software development model used is object-oriented methodologies, SOA itself is a collection consisting of tools, technologies, frameworks, and best practices that facilitate the implementation of a service quickly. in a study this uses the tools of Business Process Management System (BPMS to support the implementation of service-oriented software. the purpose of this study is to produce a model of activities and artifacts of the application software development models of the SE with a case study Rate Loans. Validation to the design of the model is done through testing of the software produced. The results showed that the application of the SE in the development of service-oriented software can use the object-oriented methodology by providing additional value-added analysis and redesign of business processes to be implemented on a BPMS. BPMS usage of the application of the SE on the SOA has the advantage of visualization in the management of business processes.

Services performed by an engineering consultant

International Nuclear Information System (INIS)

Seyffert, L.

1984-01-01

In the near future, services for the nuclear power plants in operation will become particularly important. Already at the present stage, engineering firms contribute to the planning of revisions and repair work, to the design, procurement and project management of new components and subsystems, respectively; they delegate supporting engineering personnel for the execution of in-plant measures, create special EDP software, develop quality assurance systems and work on quality control. This enumeration presents a rough outline of the field of activities, although it is far from complete. Also, the lines are drawn rather artibrarily, leaving out, for instance, the extensive activities in the fields of waste management and fuel management. These are main activities of specialized engineering firms which will be the subject of a future report. (orig.) [de

7 CFR 1724.20 - Borrowers' requirements-architectural services.

Science.gov (United States)

2010-01-01

... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE ELECTRIC ENGINEERING, ARCHITECTURAL SERVICES AND DESIGN POLICIES AND PROCEDURES Architectural Services § 1724.20 Borrowers' requirements—architectural services... 7 Agriculture 11 2010-01-01 2010-01-01 false Borrowers' requirements-architectural services. 1724...

HIGH SERVE '90 - nuclear engineering services

International Nuclear Information System (INIS)

Bauer, K.G.

1991-01-01

Nuclear engineering services do not start only with maintenance or repair, but already with the early detection of imminent problems long before they become problems. Services concerning the decommissioning of plants also belong to it. A selection of the extraordinary services rendered nowadays is presented in more than 20 papers in this booklet. These papers may roughly be divided into three groups of subjects: monitoring and operational management; maintenance, repair and improvements; radioactive waste treatment and management. The first group of subjects, in particular, covers papers dealing with early detection, monitoring and diagnosing systems, using highly advanced hard- and software technologies. Modernization of instrumentation and control systems and exchange of process computer systems is another task this service has to accomplish. Process computers of the past have developed into high performance process information systems. (orig./DG) [de

Service order execution procedure (in terms of labour law

Directory of Open Access Journals (Sweden)

Ana VIDAT

2015-06-01

Full Text Available From the perspective of labor law, it is understood that the execution of the order of service, the essence of labor discipline, has in principle lawful purpose and, consequently, can not attract liability. It requires, however, the regulation mechanism by which theoretical assertions regarding order execution service materializes from a procedural standpoint.

BPELPower—A BPEL execution engine for geospatial web services

Science.gov (United States)

Yu, Genong (Eugene); Zhao, Peisheng; Di, Liping; Chen, Aijun; Deng, Meixia; Bai, Yuqi

2012-10-01

The Business Process Execution Language (BPEL) has become a popular choice for orchestrating and executing workflows in the Web environment. As one special kind of scientific workflow, geospatial Web processing workflows are data-intensive, deal with complex structures in data and geographic features, and execute automatically with limited human intervention. To enable the proper execution and coordination of geospatial workflows, a specially enhanced BPEL execution engine is required. BPELPower was designed, developed, and implemented as a generic BPEL execution engine with enhancements for executing geospatial workflows. The enhancements are especially in its capabilities in handling Geography Markup Language (GML) and standard geospatial Web services, such as the Web Processing Service (WPS) and the Web Feature Service (WFS). BPELPower has been used in several demonstrations over the decade. Two scenarios were discussed in detail to demonstrate the capabilities of BPELPower. That study showed a standard-compliant, Web-based approach for properly supporting geospatial processing, with the only enhancement at the implementation level. Pattern-based evaluation and performance improvement of the engine are discussed: BPELPower directly supports 22 workflow control patterns and 17 workflow data patterns. In the future, the engine will be enhanced with high performance parallel processing and broad Web paradigms.

Re-engineering pre-employment check-up systems: a model for improving health services.

Science.gov (United States)

Rateb, Said Abdel Hakim; El Nouman, Azza Abdel Razek; Rateb, Moshira Abdel Hakim; Asar, Mohamed Naguib; El Amin, Ayman Mohammed; Gad, Saad abdel Aziz; Mohamed, Mohamed Salah Eldin

2011-01-01

The purpose of this paper is to develop a model for improving health services provided by the pre-employment medical fitness check-up system affiliated to Egypt's Health Insurance Organization (HIO). Operations research, notably system re-engineering, is used in six randomly selected centers and findings before and after re-engineering are compared. The re-engineering model follows a systems approach, focusing on three areas: structure, process and outcome. The model is based on six main components: electronic booking, standardized check-up processes, protected medical documents, advanced archiving through an electronic content management (ECM) system, infrastructure development, and capacity building. The model originates mainly from customer needs and expectations. The centers' monthly customer flow increased significantly after re-engineering. The mean time spent per customer cycle improved after re-engineering--18.3 +/- 5.5 minutes as compared to 48.8 +/- 14.5 minutes before. Appointment delay was also significantly decreased from an average 18 to 6.2 days. Both beneficiaries and service providers were significantly more satisfied with the services after re-engineering. The model proves that re-engineering program costs are exceeded by increased revenue. Re-engineering in this study involved multiple structure and process elements. The literature review did not reveal similar re-engineering healthcare packages. Therefore, each element was compared separately. This model is highly recommended for improving service effectiveness and efficiency. This research is the first in Egypt to apply the re-engineering approach to public health systems. Developing user-friendly models for service improvement is an added value.

Engineering and service activities in the Cogema group

International Nuclear Information System (INIS)

1998-03-01

This short document presents the engineering and service daughter companies of the Cogema group: SGN (nuclear engineering, fuel cycle, wastes and spent fuels management, decontamination and dismantling); Euriware group (advice, expertise and information systems in nuclear, pharmacy, petroleum, automotive and steel making industries); Game group (industrial maintenance in nuclear, chemistry, petroleum, automotive and steel making industries); Eurisys Mesures (nuclear measurements, instrumentation, radiation protection and nuclear imaging); SICN (mechanics); STMI and Socodei (nuclear cleansing and management of low level radioactive wastes); Krebs/Speichim (chemical engineering, divisions of SGN and Technip). (J.S.)

The use of "mixing" procedure of mixed methods in health services research.

Science.gov (United States)

Zhang, Wanqing; Creswell, John

2013-08-01

Mixed methods research has emerged alongside qualitative and quantitative approaches as an important tool for health services researchers. Despite growing interest, among health services researchers, in using mixed methods designs, little has been done to identify the procedural aspects of doing so. To describe how mixed methods researchers mix the qualitative and quantitative aspects of their studies in health services research. We searched the PubMed for articles, using mixed methods in health services research, published between January 1, 2006 and December 30, 2010. We identified and reviewed 30 published health services research articles on studies in which mixed methods had been used. We selected 3 articles as illustrations to help health services researcher conceptualize the type of mixing procedures that they were using. Three main "mixing" procedures have been applied within these studies: (1) the researchers analyzed the 2 types of data at the same time but separately and integrated the results during interpretation; (2) the researchers connected the qualitative and quantitative portions in phases in such a way that 1 approach was built upon the findings of the other approach; and (3) the researchers mixed the 2 data types by embedding the analysis of 1 data type within the other. "Mixing" in mixed methods is more than just the combination of 2 independent components of the quantitative and qualitative data. The use of "mixing" procedure in health services research involves the integration, connection, and embedding of these 2 data components.

Brookhaven National Laboratory meteorological services instrument calibration plan and procedures

Energy Technology Data Exchange (ETDEWEB)

Heiser, John [Brookhaven National Lab. (BNL), Upton, NY (United States)

2013-02-16

This document describes the Meteorological Services (Met Services) Calibration and Maintenance Schedule and Procedures, The purpose is to establish the frequency and mechanism for the calibration and maintenance of the network of meteorological instrumentation operated by Met Services. The goal is to maintain the network in a manner that will result in accurate, precise and reliable readings from the instrumentation.

Integration of emergency action levels with Combustion Engineering Emergency Operating Procedures

International Nuclear Information System (INIS)

Faletti, D.W.; Jamison, J.D.

1985-09-01

This report documents the development of a method for integrating Emergency Action Levels (EALs) with plant-specific Emergency Operating Procedures (EOPs) using the Combustion Engineering Owners' Group Emergency Operating Procedure Technical Guidelines (CEOG EOPTFs). EALs are discrete conditions or values of plant operating parameters which, if exceeded, require declaration of an appropriate level of emergency. At most operating plants, the EALs and event classification procedures are totally separate from the Emergency Operating Procedures used by the plant staff to control the plant during abnormal conditions. Control room personnel using the EOPs to deal with abnormal plant conditions must recognize when plant safety is sufficiently degraded that an emergency declaration may be warranted, and then enter a separate classification procedure containing EALs for a number of plant conditions and parameters. The operator then compares the existing plant conditions to the EALs and makes an emergency declaration accordingly. Using the Combustion Engineering Owners' Group Technical Guidelines document, a set of emergency class definitions and criteria were developed based on the status of the three main fission product barriers (fuel cladding, primary coolant system and containment). The EOPTGs were then annotated with suggested guidance to a procedure writer. The proposed method was tested by applying it to the reactor accident sequences that were shown in the reactor safety study to dominate accident risk. The object of the test was to determine if an EAL set linked to the EOP annotations would produce timely and accurate classification of the risk-dominant sequences. 6 refs., 13 figs., 31 tabs

Mechanical property tests in hot gas environment for evaluation of life expectancy of aero-engine turbine blades and for assessment of procedures for prolonging service life. Mechanische Pruefung unter Heissgasatmosphaere zur Ermittlung der Lebenserwartung von Fluggasturbinenschaufeln und zur Bewertung von Verfahren zur Lebensdauerverlaengerung

Energy Technology Data Exchange (ETDEWEB)

Peichl, L

1984-01-01

The aim of this programme was the determination and optimization of mechanical testing procedures in order to enable a service life prediction for turbine blades as well as to measure the life consumption of blades which have already been in service. Under these testing conditions procedures were to be investigated which lead to a prolongation of the service life of the blades. The results have shown that the rig test at constant values of load and temperature, which are typical for service conditions, is sufficient for the laboratory simulation. The life consumption of blades run in the engine can be determined by measuring the residual creep life in the rig test. Using the resulting data the life consumption of a particular blade run in the engine can be estimated by the non-destructive measurement of its elongation. The precision of residual life prediction is raised by respecting the master heat and porosity of the blades. From the investigation of high-temperature corrosion resistant coatings it follows that IN 100 can be protected against the attack of sea salt over its whole creep life by coating with a precious metal modified aluminide or by LPPS- or EB-PVD-MCrAlY-coatings. By aluminising, the cooling channels of turbine blades can be protected against oxidation over more than 700 h in the temperature/load cycling test. However, the coating technique used is only applicable under laboratory conditions. In contrary, internal coating by pulse aluminising, which is compatible to production conditions, showed less oxidation resistance.

Changing the Teaching/Learning Procedures in Physics for Agricultural Engineering. A Case Study

Science.gov (United States)

Mulero, Angel; Parra, M. Isabel; Cachadina, Isidro

2012-01-01

The subject "Physical Fundamentals of Engineering" for agricultural engineers in the University of Extremadura has long had high rates of students not attending classes, not presenting for examinations and, finally, failing the subject. During the 2007 and 2008 courses, the teaching/learning procedures were strongly modified. Analysis of the…

ON THE THREAT OF SUPPLIERS FOR THE ENGINEERING CONSULTING AND DESIGN SERVICES FIRMS

Directory of Open Access Journals (Sweden)

Gabriel Sorin STROE

2014-06-01

Full Text Available In the case of companies from engineering consulting and design services industry the classic models of analysis (e.g. Porter's five forces for structural analysis exhibit interesting aspects in comparison with the situation when applied to traditional services or industrial production firms, due to the distinctive characteristics of the industry. The purpose of this paper is to present a general overview of the engineering consulting and design industry also analyze different facets of the suppliers concept and their force and threat for the engineering services firms. The paper aims at analyzing the dual strategic role of aspecial type of suppliers for the engineering companies.

Advanced medical life support procedures in vitally compromised children by a helicopter emergency medical service.

NARCIS (Netherlands)

Gerritse, B.M.; Schalkwijk, A.; Pelzer, B.J.; Scheffer, G.J.; Draaisma, J.M.T.

2010-01-01

BACKGROUND: To determine the advanced life support procedures provided by an Emergency Medical Service (EMS) and a Helicopter Emergency Medical Service (HEMS) for vitally compromised children. Incidence and success rate of several procedures were studied, with a distinction made between procedures

ETICS: the international software engineering service for the grid

Energy Technology Data Exchange (ETDEWEB)

Meglio, A D; Begin, M-E [CERN (Switzerland); Couvares, P [University of Wisconsin-Madison (United States); Ronchieri, E [INFN CNAF (Italy); Takacs, E [4D SOFT Ltd (Hungary)], E-mail: alberto.di.meglio@cern.ch

2008-07-15

The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects are using the software engineering services to build, validate and distribute their software. Finally a number of significant use and test cases will be described to show how ETICS can be used in particular to perform interoperability tests of grid middleware using the grid itself.

ETICS: the international software engineering service for the grid

Science.gov (United States)

Meglio, A. D.; Bégin, M.-E.; Couvares, P.; Ronchieri, E.; Takacs, E.

2008-07-01

The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects are using the software engineering services to build, validate and distribute their software. Finally a number of significant use and test cases will be described to show how ETICS can be used in particular to perform interoperability tests of grid middleware using the grid itself.

ETICS: the international software engineering service for the grid

International Nuclear Information System (INIS)

Meglio, A D; Begin, M-E; Couvares, P; Ronchieri, E; Takacs, E

2008-01-01

The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects are using the software engineering services to build, validate and distribute their software. Finally a number of significant use and test cases will be described to show how ETICS can be used in particular to perform interoperability tests of grid middleware using the grid itself

Outsourced design services lessons learned from LHC civil engineering

CERN Document Server

Watson, T

2003-01-01

In April 1996 CERN awarded three contracts for the provision of civil engineering design and site supervision services associated with the LHC Project. These three contracts with an average value at signature of 12MCHF were placed using the “two envelope” award system. Eight firms from six member states were integrated into three Joint Ventures. For Projects prior to the LHC, CERN would have carried out the design and supervision using in-house staff. The change to out-sourced services represented a major step for CERN. After seven years, the contracts are now coming to their conclusion. This paper aims to discuss the reasons why these contracts were originally implemented, the lessons than have been learnt over the last seven years and conclusions on how CERN could approach the need for civil engineering design services in the future.

Global polar geospatial information service retrieval based on search engine and ontology reasoning

Science.gov (United States)

Chen, Nengcheng; E, Dongcheng; Di, Liping; Gong, Jianya; Chen, Zeqiang

2007-01-01

In order to improve the access precision of polar geospatial information service on web, a new methodology for retrieving global spatial information services based on geospatial service search and ontology reasoning is proposed, the geospatial service search is implemented to find the coarse service from web, the ontology reasoning is designed to find the refined service from the coarse service. The proposed framework includes standardized distributed geospatial web services, a geospatial service search engine, an extended UDDI registry, and a multi-protocol geospatial information service client. Some key technologies addressed include service discovery based on search engine and service ontology modeling and reasoning in the Antarctic geospatial context. Finally, an Antarctica multi protocol OWS portal prototype based on the proposed methodology is introduced.

48 CFR 53.236-2 - Architect-engineer services (SF's 252 and 330).

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 2 2010-10-01 2010-10-01 false Architect-engineer... ACQUISITION REGULATION (CONTINUED) CLAUSES AND FORMS FORMS Prescription of Forms 53.236-2 Architect-engineer...-engineer and related services: (a) SF 252 (Rev. 10/83), Architect-Engineer Contract. SF 252 is prescribed...

Power Product Equipment Technician: Outboard-Engine Systems and Service. Teacher Edition [and] Student Edition.

Science.gov (United States)

Hilley, Robert

This curriculum guide contains teacher and student materials for a course on outboard-engine boat systems and service for power product equipment technician occupations. The course contains the following four units of instruction: (1) Outboard-Engine Design and Identification; (2) Operation and Service of Engine-Support Systems; (3) Operation and…

Towards Trust Engineering for Opportunistic Cloud Services

DEFF Research Database (Denmark)

Kuada, Eric

2014-01-01

The systematic review methodology has been employed to review trust related studies in cloud computing. It was observed that trusted computing technologies and reputation based approaches are the main approaches to trust engineering in cloud computing. Also, trusted third party approaches...... and the deployment model play a significant role in enhancing trust between service providers and consumers. It was observed that the concept of trust is used loosely without any formal specification in cloud computing discussions and trust engineering in general. As a first step towards addressing this problem, we...... have contextualized the formal trust specification in multi-agent environments for cloud computing....

Evaluating a Service-Oriented Architecture

Science.gov (United States)

2007-09-01

See the description on page 13. SaaS Software as a service ( SaaS ) is a software delivery model where customers don’t own a copy of the application... serviceability REST Representational State Transfer RIA rich internet application RPC remote procedure call SaaS software as a service SAML Security...Evaluating a Service -Oriented Architecture Phil Bianco, Software Engineering Institute Rick Kotermanski, Summa Technologies Paulo Merson

46 CFR 11.518 - Service requirements for chief engineer (limited oceans) of steam and/or motor vessels.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Service requirements for chief engineer (limited oceans... Requirements for Engineer Officer § 11.518 Service requirements for chief engineer (limited oceans) of steam... engineer (limited oceans) of steam and/or motor vessels is five years total service in the engineroom of...

SemMat: Federated Semantic Services Platform for Open materials Science and Engineering

Science.gov (United States)

2017-01-01

SEMMAT: FEDERATED SEMANTIC SERVICES PLATFORM FOR OPEN MATERIALS SCIENCE AND ENGINEERING WRIGHT STATE UNIVERSITY JANUARY 2017 FINAL TECHNICAL...COVERED (From - To) JUL 2013 – JUN 2016 4. TITLE AND SUBTITLE SemMat: FEDERATED SEMANTIC SERVICES PLATFORM FOR OPEN MATERIALS SCIENCE AND ENGINEERING...models to represent materials data. This provides a data exchange scheme for materials science , which also includes provenance information to promote

Motivation and reward systems in service provision: exploring motivators for people providing engineering services

DEFF Research Database (Denmark)

Kreye, Melanie; Nandrup-Bus, Troels

2015-01-01

It is becoming a distinctive feature for manufacturing firms to compete strategically through service provision. In relation to reward systems the aim of this thesis is to investigate what motivates employees of servitized manufacturing firms when providing engineering services and why. Through...... quantitative and qualitative data collection with an international company within the European healthcare sector, the findings show that key motivating factors were to “delight” the customer and being able to take responsibility and accountability for ones work. Service employees were found to feel proud...

Engineering factors influencing Corbicula fouling in nuclear-service water systems

International Nuclear Information System (INIS)

Henager, C.H.; Johnson, K.I.; Page, T.L.

1983-06-01

Corbicula fouling is a continuing problem in nuclear-service water systems. More knowledge of biological and engineering factors is needed to develop effective detection and control methods. A data base on Corbicula fouling was compiled from nuclear and non-nuclear power stations and industries using raw water. This data base was used in an analysis to identify systems and components which are conducive to fouling by Corbicula. Bounds on several engineering parameters such as velocity and temperature which support Corbicula growth are given. Service water systems found in BWR and PWR reactors are listed and those that show fouling are identified. Possible safety implications of Corbicula fouling are discussed for specific service water systems. Several effective control methods in current use include backflushing with heated water, centrifugal strainers, and continuous chlorination during spawning seasons

Exploring, Documenting, and Improving Humanitarian Service Learning through Engineers Without Borders USA

OpenAIRE

Buchanan, Elizabeth; Berg, Devin; Lee, Tina; Buchanan, Elizabeth; Lacksonen, Tom

2017-01-01

Exploring, Documenting, and Improving Humanitarian Service Learning through Engineers without Borders-USA is a four-year project exploring a variety of challenges and opportunities in university-based service learning programs. Specifically, this project looks holistically at the inception and evolution of a new Engineers Without Borders USA chapter, while analyzing characteristics, values, and demographics of individuals involved in EWB community-based humanitarian projects in multiple chapt...

76 FR 54528 - Standard Operating Procedures (SOP) of the Aircraft Certification Service (AIR) Process for the...

Science.gov (United States)

2011-09-01

...) of the Aircraft Certification Service (AIR) Process for the Sequencing of Certification and... on the Aircraft Certification Service (AIR) standard operating procedure (SOP) describing the process... comments on the SOP : AIR-100-001; Standard Operating Procedure--Aircraft Certification Service Project...

First approval procedure of the TL dosimetric service of the NPP in Slovenia

International Nuclear Information System (INIS)

Janzekovic, H.; Krizman, M.; Pucelj, B.; Stuhec, M.; Zdesar, U.

2001-01-01

The individual dosimetry of exposed workers in a NPP is one of the essential parts which demonstrates the radiation protection standards achieved in a facility. According to the current legislation the Ministry of Health of the Republic of Slovenia has the authority to grant approvals to personal dosimetric services which perform the dosimetric monitoring of workers in Slovenia. Due to the fact that the detailed approval procedure is not given in national regulations, the Ministry of Health in 2000 established a group of experts with the task to prepare technical and organising requirements for such approval. Based on international documents [1,2,3] the Approval procedure for the thermoluminescence dosimetric (TL) services was created. Following this procedure the assessment of the TL dosimetric service in the NPP was performed. The problems related to the technical and organising requirements with the emphasise on the QA/QC criteria of the TL dosimetric service will be discussed.(author)

Motivation and reward systems in service provision: exploring motivators for people providing engineering services

OpenAIRE

Kreye, Melanie; Nandrup-Bus, Troels

2015-01-01

It is becoming a distinctive feature for manufacturing firms to compete strategically through service provision. In relation to reward systems the aim of this thesis is to investigate what motivates employees of servitized manufacturing firms when providing engineering services and why. Through quantitative and qualitative data collection with an international company within the European healthcare sector, the findings show that key motivating factors were to “delight” the customer and being ...

47 CFR 64.401 - Policies and procedures for provisioning and restoring certain telecommunications services in...

Science.gov (United States)

2010-10-01

... 47 Telecommunication 3 2010-10-01 2010-10-01 false Policies and procedures for provisioning and restoring certain telecommunications services in emergencies. 64.401 Section 64.401 Telecommunication... procedures for provisioning and restoring certain telecommunications services in emergencies. The...

DIESEL ENGINE SYSTEMS. AGRICULTURAL MACHINERY--SERVICE OCCUPATIONS, MODULE NUMBER 15.

Science.gov (United States)

Ohio State Univ., Columbus. Center for Vocational and Technical Education.

ONE OF A SERIES DESIGNED TO HELP TEACHERS PREPARE POSTSECONDARY STUDENTS FOR AGRICULTURAL MACHINERY SERVICE OCCUPATIONS AS PARTS MEN, MECHANICS, MECHANIC'S HELPERS, AND SERVICE SUPERVISORS, THIS GUIDE AIMS TO DEVELOP STUDENT UNDERSTANDING OF THE CONSTRUCTION AND OPERATING PRINCIPLES OF DIESEL ENGINES. IT WAS DEVELOPED BY A NATIONAL TASK FORCE ON…

Business process re-engineering in service operations

International Nuclear Information System (INIS)

McClintock, J.W.

1995-01-01

The concept of business process re-engineering, and how it was applied to the operations of the Consumers Gas Company were discussed. Business process re-engineering was defined as the improvement of the efficiency of the customer-service process, and the overall improvement of practices and operations. The re-engineering project was said to involve a thorough analysis of information technology, current limitations, and business operational needs, undertaken on an enterprise-wide basis. Viewed generically,a re-engineering project was said to have six major components: (1) business drivers (i.e. the articulation of the Company's strategic issues); (2) benchmark measures; (3) future state process models; (4) cost/benefit analysis; (5) a change management plan; and (6) a development plan. Business improvements expected to result from the project include reduced cost of operation, reduction of waste, and a substantially complete re-design of the business process. Management of the project involved a team approach, and help of a consultant to identify the scope of the re-design, its limitations, and future state. A life expectancy of approximately 10 years was given for the re-engineering plan, with annual benefits (in terms of cost reduction) of $4.6 million by the year 2000

Web Services as Product Experience Augmenters and the Implications for Requirements Engineering: A Position Paper

NARCIS (Netherlands)

van Eck, Pascal; Nijholt, Antinus; Wieringa, Roelf J.

There is currently little insight into what requirement engineering for web services is and in which context it will be carried out. In this position paper, we investigate requirements engineering for a special kind of web services, namely web services that are used to augment the perceived value of

An overview of game-based learning in building services engineering education

Science.gov (United States)

Alanne, Kari

2016-03-01

To ensure proper competence development and short graduation times for engineering students, it is essential that the study motivation is encouraged by new learning methods. In game-based learning, the learner's engagement is increased and learning is made meaningful by applying game-like features such as competition and rewarding through virtual promotions or achievement badges. In this paper, the state of the art of game-based learning in building services engineering education at university level is reviewed and discussed. A systematic literature review indicates that educational games have been reported in the field of related disciplines, such as mechanical and civil engineering. The development of system-level educational games that realistically simulate work life in building services engineering is still in its infancy. Novel rewarding practices and more comprehensive approaches entailing the state-of-the-art information tools such as building information modelling, geographic information systems, building management systems and augmented reality are needed in the future.

Engineering Compensations in Web Service Environment

DEFF Research Database (Denmark)

Schäfer, Micahel; Dolog, Peter; Nejdl, Wolfgang

2007-01-01

Business to business integration has recently been performed by employing Web service environments. Moreover, such environments are being provided by major players on the technology markets. Those environments are based on open specifications for transaction coordination. When a failure in such a......Business to business integration has recently been performed by employing Web service environments. Moreover, such environments are being provided by major players on the technology markets. Those environments are based on open specifications for transaction coordination. When a failure...... in such an environment occurs, a compensation can be initiated to recover from the failure. However, current environments have only limited capabilities for compensations, and are usually based on backward recovery. In this paper, we introduce an engineering approach and an environment to deal with advanced...... compensations based on forward recovery principles. We extend the existing Web service transaction coordination architecture and infrastructure in order to support flexible compensation operations. A contract-based approach is being used, which allows the specification of permitted compensations at runtime. We...

Deployment of e-health services - a business model engineering strategy.

Science.gov (United States)

Kijl, Björn; Nieuwenhuis, Lambert J M; Huis in 't Veld, Rianne M H A; Hermens, Hermie J; Vollenbroek-Hutten, Miriam M R

2010-01-01

We designed a business model for deploying a myofeedback-based teletreatment service. An iterative and combined qualitative and quantitative action design approach was used for developing the business model and the related value network. Insights from surveys, desk research, expert interviews, workshops and quantitative modelling were combined to produce the first business model and then to refine it in three design cycles. The business model engineering strategy provided important insights which led to an improved, more viable and feasible business model and related value network design. Based on this experience, we conclude that the process of early stage business model engineering reduces risk and produces substantial savings in costs and resources related to service deployment.

Experience in accident liquidation at the Chernobyl' NPP and problems of organization of the emergency-engineering service

International Nuclear Information System (INIS)

Andreev, Yu.B.; Samojlenko, Yu.N.

1989-01-01

The efficiency of measures realized in order to eliminate the Chernobyl' accident effects is estimated. The principles of organization of the emergency-engineering service for accident elimination in nuclear power engineering are described. The automated information safety system should from the technical basis for this service. The information system structure is determined. The list of main directions of research and design works realized in the emergency-engineering service interests is given. It is noted that all parts of the emergency-engineering service must prepare the plants of works together with the USSR civil defense service, and they should interact in the process of accident elimination basing on coordinated organizational and technical solutions

Advanced medical life support procedures in vitally compromised children by a helicopter emergency medical service

Directory of Open Access Journals (Sweden)

Scheffer Gert J

2010-03-01

Full Text Available Abstract Background To determine the advanced life support procedures provided by an Emergency Medical Service (EMS and a Helicopter Emergency Medical Service (HEMS for vitally compromised children. Incidence and success rate of several procedures were studied, with a distinction made between procedures restricted to the HEMS-physician and procedures for which the HEMS is more experienced than the EMS. Methods Prospective study of a consecutive group of children examined and treated by the HEMS of the eastern region of the Netherlands. Data regarding type of emergency, physiological parameters, NACA scores, treatment, and 24-hour survival were collected and subsequently analysed. Results Of the 558 children examined and treated by the HEMS on scene, 79% had a NACA score of IV-VII. 65% of the children had one or more advanced life support procedures restricted to the HEMS and 78% of the children had one or more procedures for which the HEMS is more experienced than the EMS. The HEMS intubated 38% of all children, and 23% of the children intubated and ventilated by the EMS needed emergency correction because of potentially lethal complications. The HEMS provided the greater part of intraosseous access, as the EMS paramedics almost exclusively reserved this procedure for children in cardiopulmonary resuscitation. The EMS provided pain management only to children older than four years of age, but a larger group was in need of analgesia upon arrival of the HEMS, and was subsequently treated by the HEMS. Conclusions The Helicopter Emergency Medical Service of the eastern region of the Netherlands brings essential medical expertise in the field not provided by the emergency medical service. The Emergency Medical Service does not provide a significant quantity of procedures obviously needed by the paediatric patient.

Monitoring techniques and alarm procedures for CMS Services and Sites in WLCG

International Nuclear Information System (INIS)

Molina-Perez, J; Sciabà, A; Magini, N; Bonacorsi, D; Gutsche, O; Flix, J; Kreuzer, P; Fajardo, E; Boccali, T; Klute, M; Gomes, D; Kaselis, R; Butenas, I; Du, R; Wang, W

2012-01-01

The CMS offline computing system is composed of roughly 80 sites (including most experienced T3s) and a number of central services to distribute, process and analyze data worldwide. A high level of stability and reliability is required from the underlying infrastructure and services, partially covered by local or automated monitoring and alarming systems such as Lemon and SLS; the former collects metrics from sensors installed on computing nodes and triggers alarms when values are out of range, the latter measures the quality of service and warns managers when service is affected. CMS has established computing shift procedures with personnel operating worldwide from remote Computing Centers, under the supervision of the Computing Run Coordinator at CERN. This dedicated 24/7 computing shift personnel is contributing to detect and react timely on any unexpected error and hence ensure that CMS workflows are carried out efficiently and in a sustained manner. Synergy among all the involved actors is exploited to ensure the 24/7 monitoring, alarming and troubleshooting of the CMS computing sites and services. We review the deployment of the monitoring and alarming procedures, and report on the experience gained throughout the first two years of LHC operation. We describe the efficiency of the communication tools employed, the coherent monitoring framework, the proactive alarming systems and the proficient troubleshooting procedures that helped the CMS Computing facilities and infrastructure to operate at high reliability levels.

Monitoring techniques and alarm procedures for CMS services and sites in WLCG

Energy Technology Data Exchange (ETDEWEB)

Molina-Perez, J. [UC, San Diego; Bonacorsi, D. [Bologna U.; Gutsche, O. [Fermilab; Sciaba, A. [CERN; Flix, J. [Madrid, CIEMAT; Kreuzer, P. [CERN; Fajardo, E. [Andes U., Bogota; Boccali, T. [INFN, Pisa; Klute, M. [MIT; Gomes, D. [Rio de Janeiro State U.; Kaselis, R. [Vilnius U.; Du, R. [Beijing, Inst. High Energy Phys.; Magini, N. [CERN; Butenas, I. [Vilnius U.; Wang, W. [Beijing, Inst. High Energy Phys.

2012-01-01

The CMS offline computing system is composed of roughly 80 sites (including most experienced T3s) and a number of central services to distribute, process and analyze data worldwide. A high level of stability and reliability is required from the underlying infrastructure and services, partially covered by local or automated monitoring and alarming systems such as Lemon and SLS, the former collects metrics from sensors installed on computing nodes and triggers alarms when values are out of range, the latter measures the quality of service and warns managers when service is affected. CMS has established computing shift procedures with personnel operating worldwide from remote Computing Centers, under the supervision of the Computing Run Coordinator at CERN. This dedicated 24/7 computing shift personnel is contributing to detect and react timely on any unexpected error and hence ensure that CMS workflows are carried out efficiently and in a sustained manner. Synergy among all the involved actors is exploited to ensure the 24/7 monitoring, alarming and troubleshooting of the CMS computing sites and services. We review the deployment of the monitoring and alarming procedures, and report on the experience gained throughout the first two years of LHC operation. We describe the efficiency of the communication tools employed, the coherent monitoring framework, the proactive alarming systems and the proficient troubleshooting procedures that helped the CMS Computing facilities and infrastructure to operate at high reliability levels.

Agile Service Development: A Rule-Based Method Engineering Approach

NARCIS (Netherlands)

dr. Martijn Zoet; Stijn Hoppenbrouwers; Inge van de Weerd; Johan Versendaal

2011-01-01

Agile software development has evolved into an increasingly mature software development approach and has been applied successfully in many software vendors’ development departments. In this position paper, we address the broader agile service development. Based on method engineering principles we

Information needs of engineers. The methodology developed by the WFEO Committee on Engineering Information and the use of value analysis for improving information services

International Nuclear Information System (INIS)

Darjoto, S.W.; Martono, A.; Michel, J.

1990-05-01

The World Federation of Engineering Organizations - WFEO - through the work of its Committee on Engineering Information, aims at improving the efficiency of engineers and particularly at developing new attitudes and practices concerning the specialized information mastering. One important part of the WFEO/CEI programme of activities during the last years and for the next years was and is devoted to a better understanding of the information needs of engineers. But also, it seems now essential to WFEO/CEI to better evaluate information services in order to correctly adapt them to the identified needs of engineers. The following communication will emphasize these two main and related perspectives: identifying the information needs of engineers; developing Value Analysis approaches for engineering information services. (author). 3 refs

Information needs of engineers. The methodology developed by the WFEO Committee on Engineering Information and the use of value analysis for improving information services

Energy Technology Data Exchange (ETDEWEB)

Darjoto, S W [Indonesian Inst. of Sciences, Bandung (Indonesia); Martono, A [Indonesian Inst. of Engineers, Jakarta (Indonesia); Michel, J [Ecole Nationale des Ponts et Chaussees, Paris (France)

1990-05-01

The World Federation of Engineering Organizations - WFEO - through the work of its Committee on Engineering Information, aims at improving the efficiency of engineers and particularly at developing new attitudes and practices concerning the specialized information mastering. One important part of the WFEO/CEI programme of activities during the last years and for the next years was and is devoted to a better understanding of the information needs of engineers. But also, it seems now essential to WFEO/CEI to better evaluate information services in order to correctly adapt them to the identified needs of engineers. The following communication will emphasize these two main and related perspectives: identifying the information needs of engineers; developing Value Analysis approaches for engineering information services. (author). 3 refs.

Powertrain Test Procedure Development for EPA GHG Certification of Medium- and Heavy-Duty Engines and Vehicles

Energy Technology Data Exchange (ETDEWEB)

Chambon, Paul H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Deter, Dean D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-07-01

xiii ABSTRACT The goal of this project is to develop and evaluate powertrain test procedures that can accurately simulate real-world operating conditions, and to determine greenhouse gas (GHG) emissions of advanced medium- and heavy-duty engine and vehicle technologies. ORNL used their Vehicle System Integration Laboratory to evaluate test procedures on a stand-alone engine as well as two powertrains. Those components where subjected to various drive cycles and vehicle conditions to evaluate the validity of the results over a broad range of test conditions. Overall, more than 1000 tests were performed. The data are compiled and analyzed in this report.

ETICS the international software engineering service for the grid

CERN Document Server

Di Meglio, A; Couvares, P; Ronchieri, E; Takács, E

2008-01-01

The ETICS system is a distributed software configuration, build and test system designed to fulfil the needs of improving the quality, reliability and interoperability of distributed software in general and grid software in particular. The ETICS project is a consortium of five partners (CERN, INFN, Engineering Ingegneria Informatica, 4D Soft and the University of Wisconsin-Madison). The ETICS service consists of a build and test job execution system based on the Metronome software and an integrated set of web services and software engineering tools to design, maintain and control build and test scenarios. The ETICS system allows taking into account complex dependencies among applications and middleware components and provides a rich environment to perform static and dynamic analysis of the software and execute deployment, system and interoperability tests. This paper gives an overview of the system architecture and functionality set and then describes how the EC-funded EGEE, DILIGENT and OMII-Europe projects ...

An IMP interaction approach to modelling business-to-business professional service quality: the case of Hong Kong consulting engineering service

OpenAIRE

Woo, Ka-shing

2001-01-01

In the domain of services marketing, the most researched area is in service quality. Since the pioneering stage of service quality research in the early 1980s, most of the studies have been conducted in the context of consumer services and consumer professional services. The purpose of this study is to bridge the gap in the existing literature to measure service quality of a particular business-to-business professional service industry (i.e., Hong Kong consulting engineering industry). I...

46 CFR 11.522 - Service requirements for assistant engineer (limited oceans) of steam and/or motor vessels.

Science.gov (United States)

2010-10-01

... oceans) of steam and/or motor vessels. 11.522 Section 11.522 Shipping COAST GUARD, DEPARTMENT OF HOMELAND... Requirements for Engineer Officer § 11.522 Service requirements for assistant engineer (limited oceans) of... assistant engineer (limited oceans) of steam and/or motor vessels is three years of service in the...

Performance-based service acquisition (PBSA) of TRIDENT strategic weapons systems (SWS) technical engineering support (TES) services

OpenAIRE

Arcidiacono, William J.

2003-01-01

CIVINS (Civilian Institutions) Thesis document Approved for public release ; distribution is unlimited The objective of this thesis is to determine whether the Strategic Systems Programs (SSP) should apply the concepts of Performance-Based Service Acquisition (PBSA) to Strategic Weapons Systems (SWS) Technical Engineering Support (TES) Services. This thesis provides a Department of Defense (DoD), Department of the Navy (DON), and SSP SWS program acquisition and PBSA history background, ...

40 CFR 90.116 - Certification procedure-determining engine displacement, engine class, and engine families.

Science.gov (United States)

2010-07-01

... engine displacement, engine class, and engine families. 90.116 Section 90.116 Protection of Environment...-IGNITION ENGINES AT OR BELOW 19 KILOWATTS Emission Standards and Certification Provisions § 90.116 Certification procedure—determining engine displacement, engine class, and engine families. (a) Engine...

UFISA: electric facility engineering for the service of emergy market

International Nuclear Information System (INIS)

Gutierrez Zapico, A.

1997-01-01

UFISA is the engineering company with the experience of UNION ELECTRICA FENOSA S.A. It activity began in 1990. This company offers to national and international markets the services for energy consumers and for the electricity costumers. (Author)

Multiple Learning Strategies Project. Small Engine Repair Service. Regular Vocational. [Vol. 1.

Science.gov (United States)

Pitts, Jim; And Others

This instructional package is one of two designed for use by regular vocational students in the vocational area of small engine repair service. Contained in this document are forty-four learning modules organized into ten units: engine block; air cleaner; starters; fuel tanks; lines, filters, and pumps; carburetors; electrical; magneto systems;…

Computerized system for hospital engineering service management

International Nuclear Information System (INIS)

Centeno, C A; Gonzalez, E A; Cagnolo, F J; Olmos, C E

2007-01-01

When a Hospital Engineering Service (HES) is implemented within a health care environment, the idea is to improve service conditions and costs as well as to provide timely responses to equipment preventive maintenance and infrastructure requirements. An HES must, within the shortest possible period of time, meet the above requirements at the cost necessary to provide the service quality sought. In many cases there is a lack of minimal materials and staff who are qualified to attain the objectives that have been set. Therefore, external assistance becomes necessary. In this context, actions are often taken which, because they are not recorded, cannot be assessed in order to evaluate the HES. Since all action taken is appraised from the purely economic point of view, in the final analysis the contributions from staff remain invisible. This situation works against the possibility of quantifying the convenience of possessing an internal HES. The software support system we have developed here is oriented toward providing all the necessary data to address this issue

An analysis on the marketing of engineering services for the cement manufacturing industry in Sub-Saharan Africa

CSIR Research Space (South Africa)

Meyer, JAM

2017-09-01

Full Text Available South African organisations that offer engineering services to the local and foreign market contribute significantly towards South Africa’s overall Gross Domestic Product (GDP). The importance of engineering services in South Africa motivates...

Applied Ontology Engineering in Cloud Services, Networks and Management Systems

CERN Document Server

Serrano Orozco, J Martín

2012-01-01

Metadata standards in today’s ICT sector are proliferating at unprecedented levels, while automated information management systems collect and process exponentially increasing quantities of data. With interoperability and knowledge exchange identified as a core challenge in the sector, this book examines the role ontology engineering can play in providing solutions to the problems of information interoperability and linked data. At the same time as introducing basic concepts of ontology engineering, the book discusses methodological approaches to formal representation of data and information models, thus facilitating information interoperability between heterogeneous, complex and distributed communication systems. In doing so, the text advocates the advantages of using ontology engineering in telecommunications systems. In addition, it offers a wealth of guidance and best-practice techniques for instances in which ontology engineering is applied in cloud services, computer networks and management systems. �...

Service Cart For Engines

Science.gov (United States)

Ng, Gim Shek

1995-01-01

Cart supports rear-mounted air-cooled engine from Volkswagen or Porsche automobile. One person removes, repairs, tests, and reinstalls engine of car, van, or home-built airplane. Consists of framework of wood, steel, and aluminum components supported by four wheels. Engine lifted from vehicle by hydraulic jack and gently lowered onto waiting cart. Jack removed from under engine. Rear of vehicle raised just enough that engine can be rolled out from under it. Cart easily supports 200-lb engine. Also used to hold transmission. With removable sheet-metal top, cart used as portable seat.

The prevalence of mental health problems among users of NHS stop smoking services: effects of implementing a routine screening procedure

Directory of Open Access Journals (Sweden)

Ratschen Elena

2011-08-01

Full Text Available Abstract Background Tobacco dependence among people with mental health problems is an issue that deserves attention both from a clinical and from a public health perspective. Research suggests that Stop Smoking Services often fail to ask clients about underlying mental health problems and thus fail to put in place the treatment adaptations and liaison procedures often required to meet the needs of clients with a mental health condition who want to stop smoking. This study assesses the recording of mental health problems in a large NHS stop smoking service in England and examines the effect of implementing a short screening procedure on recording mental health conditions. Methods Treatment records from the Stop Smoking Service covering a period of 13 months were audited. The prevalence of reported mental health problems in the six month period before the implementation of the mental health screening procedure was compared with that of the six month period following implementation. The screening procedure was only implemented in the support services directly provided by the Stop Smoking Service. Comparisons were also made with third-party sections of the service where no such screening procedure was introduced. Results The prevalence of reported mental health problems among a total of n = 4999 clients rose from less than 1% before implementation of the screening procedure to nearly 12% in the period following implementation, with the change being statistically significant. No significant rise was observed over the same period in the sections of the service where no screening procedure was implemented. Conclusions The absence of standard procedures to record mental health problems among service users in many stop smoking services is currently likely to prevent the detection of co morbidity. Implementing a simple screening procedure appears suitable to increase the routine recording of mental health problems in a stop smoking service, which is an

39 CFR 230.26 - Do these rules affect the service of process requirements of the Federal Rules of Civil Procedure...

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Do these rules affect the service of process....26 Do these rules affect the service of process requirements of the Federal Rules of Civil Procedure... Rules of Civil Procedure regarding service of process. ...

After-sales service of engineering industrial assets a reference framework for warranty management

CERN Document Server

González-Prida Díaz, Vicente

2014-01-01

This book explores the practical implementation of an advanced after-sales management framework devoted to warranty management. The framework is intended for companies producing either standardized or customized products, and such a management tool will facilitate organizational improvement and support innovative decision making processes for technical assistance in after-sales services.  “After–sales Service of Engineering Industrial Assets” comprises a proposal for a warranty management framework, with an account of the different methods that can be used to improve decision making in the different stages of the after-sales service management process, and strategies for strengthening the structure and foundations of the framework. A review of the fundamental issues and current research topics in warranty management and after sales services is also provided, which is exemplified by a case study. This book is intended for postgraduates, researchers and engineers who are interested in aftersales manageme...

Engine Tune-Up Service. Unit 4: Secondary Circuit. Posttests. Automotive Mechanics Curriculum.

Science.gov (United States)

Morse, David T.

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 4, Secondary Circuit, available separately as CE 031 214. Focus of the posttests is testing and servicing the secondary ignition circuit. One multiple choice posttest is provided that covers the seven performance objectives contained in the unit. (No…

40 CFR 1048.401 - What testing requirements apply to my engines that have gone into service?

Science.gov (United States)

2010-07-01

... engines that have gone into service? 1048.401 Section 1048.401 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR POLLUTION CONTROLS CONTROL OF EMISSIONS FROM NEW, LARGE NONROAD SPARK-IGNITION ENGINES Testing In-use Engines § 1048.401 What testing requirements apply to my engines that have...

Application of Value Engineering to Improve upon Customer Services Performance in Mazandaran Water and Sewage Company

Directory of Open Access Journals (Sweden)

Reza Tavakkoli-Mogahddam

2007-06-01

Full Text Available Over the course of producing and marketing goods and services, it appears that industry faces a new challenge in which information and science form the basis for any organizational movement. In this regard, the competitive preference of the organization concentrates on customer and value creation in the organization. Value engineering recognizes product/service functions and produces those with the maximum value at the lowest cost without the loss of production or service quality and safety. In this paper, using value engineering based on the international job plan of the SAVE (Society of American Value Engineering, various alternatives are proposed to improve upon the performance of Customer Services of Water and Sewage Co. The results indicate possible savings of about 714 Million Rials for the water authority in the city of Sari and 4860 Million Rials across Mazandaran Province.

An integrative fuzzy Kansei engineering and Kano model for logistics services

Science.gov (United States)

Hartono, M.; Chuan, T. K.; Prayogo, D. N.; Santoso, A.

2017-11-01

Nowadays, customer emotional needs (known as Kansei) in product and especially in services become a major concern. One of the emerging services is the logistics services. In obtaining a global competitive advantage, logistics services should understand and satisfy their customer affective impressions (Kansei). How to capture, model and analyze the customer emotions has been well structured by Kansei Engineering, equipped with Kano model to strengthen its methodology. However, its methodology lacks of the dynamics of customer perception. More specifically, there is a criticism of perceived scores on user preferences, in both perceived service quality and Kansei response, whether they represent an exact numerical value. Thus, this paper is proposed to discuss an approach of fuzzy Kansei in logistics service experiences. A case study in IT-based logistics services involving 100 subjects has been conducted. Its findings including the service gaps accompanied with prioritized improvement initiatives are discussed.

NVESTIGATION OF INTERNATIONAL ENGINEERING LICENSURE SYSTEMS

Directory of Open Access Journals (Sweden)

Selim BARADAN

2009-01-01

Full Text Available In many countries, engineers are legally required to register to a "licensure" system, which is founded on education and experience criteria and administered by a government body, to use the "engineer" title and offer professional services to the public. In today's globalized world, international alliances such as FEANI, APEC and EMF award engineers with European, APEC and International Professional engineer titles within a framework of mutual recognition of qualifications enabling them to practice outside their own country. This article examines such international licensure systems, particularly their administration processes and registration criteria, and discusses how current licensure procedures in Turkey should be revamped in case of joining an international alliance such as European Union.

42 CFR 413.122 - Payment for hospital outpatient radiology services and other diagnostic procedures.

Science.gov (United States)

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Payment for hospital outpatient radiology services... radiology services and other diagnostic procedures. (a) Basis and purpose. (1) This section implements section 1833(n) of the Act and establishes the method for determining Medicare payments for radiology...

Small Engine Repair Modules (Workbook) = Reparacion de Motores Pequenos (Guia de Trabajo)

Science.gov (United States)

New York State Dept. of Correctional Services, Albany.

This package contains an English-Language set of task procedure sheets dealing with small-engine repair and a Spanish translation of the same material. Addressed in the individual sections of the manual are the following aspects of engine tune-up, reconditioning, and troubleshooting: servicing air cleaners; cleaning gas tanks, fuel lines, and fuel…

Studies on Experimental Ontology and Knowledge Service Development in Bio-Environmental Engineering

Science.gov (United States)

Zhang, Yunliang

2018-01-01

The existing domain-related ontology and information service patterns are analyzed, and the main problems faced by the experimental scheme knowledge service were clarified. The ontology framework model for knowledge service of Bio-environmental Engineering was proposed from the aspects of experimental materials, experimental conditions and experimental instruments, and this ontology will be combined with existing knowledge organization systems to organize scientific and technological literatures, data and experimental schemes. With the similarity and priority calculation, it can improve the related domain research.

Engine Tune-up Service. Unit 6: Emission Control Systems. Posttests. Automotive Mechanics Curriculum.

Science.gov (United States)

Morse, David T.; May, Theodore R.

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 6, Emission Control Systems, available separately as CE 031 220. Focus of the posttests is inspecting, testing, and servicing emission control systems. One multiple choice posttest is provided that covers the seven performance objectives contained in…

How the Kano model contributes to Kansei engineering in services.

Science.gov (United States)

Hartono, Markus; Chuan, Tan Kay

2011-11-01

Recent studies show that products and services hold great appeal if they are attractively designed to elicit emotional feelings from customers. Kansei engineering (KE) has good potential to provide a competitive advantage to those able to read and translate customer affect and emotion in actual product and services. This study introduces an integrative framework of the Kano model and KE, applied to services. The Kano model was used and inserted into KE to exhibit the relationship between service attribute performance and customer emotional response. Essentially, the Kano model categorises service attribute quality into three major groups (must-be [M], one-dimensional [O] and attractive [A]). The findings of a case study that involved 100 tourists who stayed in luxury 4- and 5-star hotels are presented. As a practical matter, this research provides insight on which service attributes deserve more attention with regard to their significant impact on customer emotional needs. STATEMENT OF RELEVANCE: Apart from cognitive evaluation, emotions and hedonism play a big role in service encounters. Through a focus on delighting qualities of service attributes, this research enables service providers and managers to establish the extent to which they prioritise their improvement efforts and to always satisfy their customer emotions beyond expectation.

Procedures | College of Engineering & Applied Science

Science.gov (United States)

Biomedical Engineering Industry Advisory Council Civil & Environmental Engineering Civil & . pirating software, music, movies or hacking) will be referred directly to the University Police. I feel I

Engine Tune-Up Service. Unit 4: Secondary Circuit. Student Guide. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This student guide is for Unit 4, Secondary Circuit, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with how to test and service the secondary ignition circuit. A companion review exercise book and posttests are available separately as CE 031 215-216. An introduction tells how this unit fits into the total…

Engine Tune-up Service. Unit 2: Charging System. Student Guide. Automotive Mechanics Curriculum.

Science.gov (United States)

Richardson, Roger L.; Bacon, E. Miles

This student guide is for Unit 2, Charging System, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with how to test the charging system. A companion review exercise book and posttests are available separately as CE 031 209-210. An introduction tells how this unit fits into the total tune-up service, defines…

Application of diagnostic system for diesel engine

International Nuclear Information System (INIS)

Yoshinaga, Takeshi; Hayashi, Haruji; Usui, Hiromi; Tsuruzono, Atsuya; Matsuda, Takafumi

2008-01-01

The Japan Atomic Power Company (JAPC) began to implement Condition Based Maintenance (CBM) for rotating components (pumps, fans and electric motors) from 1999 and, also has begun to apply diesel engine diagnostic techniques at our three nuclear power plants since 2004. This paper provides a description of the CBM methods used for diesel engines in nuclear standby service, a summary of the procedures to introduce these diagnostic techniques to our nuclear power plants, and experience with the application of these methods to JAPC nuclear power plants. (author)

A procedure for estimation of pipe break probabilities due to IGSCC

International Nuclear Information System (INIS)

Bergman, M.; Brickstad, B.; Nilsson, F.

1998-06-01

A procedure has been developed for estimation of the failure probability of welds joints in nuclear piping susceptible to intergranular stress corrosion cracking. The procedure aims at a robust and rapid estimate of the failure probability for a specific weld with known stress state. Random properties are taken into account of the crack initiation rate, the initial crack length, the in-service inspection efficiency and the leak rate. A computer realization of the procedure has been developed for user friendly applications by design engineers. Some examples are considered to investigate the sensitivity of the failure probability to different input quantities. (au)

Procedure for the training of workers of facilities of service of the trade retailer.

Directory of Open Access Journals (Sweden)

Tania Ivón Sosa Ibarra

2011-09-01

Full Text Available The benefit of the services transforms quickly. To improve this activity is vital to reach the excellence and a fundamental element is the human factor that should be motivated and highly qualified to satisfy the necessities of the clients, of there the importance of its superación. In this investigation a training procedure is designed for workers of facilities of service of the trade that it facilitates, starting from an appropriate detection of the training necessities, to execute actions to achieve an improvement in the benefit of the services. These transformations in the superación of the workers impact significantly in their conceptions, in order to achieve the formation of a professional of the sector from the much more competent and adjusted services to the demands that it demands the current moment. The procedure is feasible of applying in all the establishments of the commercial net and it contemplates four moments: diagnostic, projection, execution and the control. It constitutes a novel experience, to the being a proposal of change and innovation in the environment of the training and the benefit of the services in the sector of the trade and it can favor the development of work values.

47 CFR 1.824 - Random selection procedures for Multichannel Multipoint Distribution Service and Multipoint...

Science.gov (United States)

2010-10-01

... an ownership interest of more than 50 percent in the media of mass communication whose service areas... Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL PRACTICE AND PROCEDURE Complaints, Applications, Tariffs...

Soil Conservation Service Curve Number method: How to mend a wrong soil moisture accounting procedure?

Science.gov (United States)

Michel, Claude; Andréassian, Vazken; Perrin, Charles

2005-02-01

This paper unveils major inconsistencies in the age-old and yet efficient Soil Conservation Service Curve Number (SCS-CN) procedure. Our findings are based on an analysis of the continuous soil moisture accounting procedure implied by the SCS-CN equation. It is shown that several flaws plague the original SCS-CN procedure, the most important one being a confusion between intrinsic parameter and initial condition. A change of parameterization and a more complete assessment of the initial condition lead to a renewed SCS-CN procedure, while keeping the acknowledged efficiency of the original method.

EIIS: An Educational Information Intelligent Search Engine Supported by Semantic Services

Science.gov (United States)

Huang, Chang-Qin; Duan, Ru-Lin; Tang, Yong; Zhu, Zhi-Ting; Yan, Yong-Jian; Guo, Yu-Qing

2011-01-01

The semantic web brings a new opportunity for efficient information organization and search. To meet the special requirements of the educational field, this paper proposes an intelligent search engine enabled by educational semantic support service, where three kinds of searches are integrated into Educational Information Intelligent Search (EIIS)…

Engine Tune-Up Service. Unit 3: Primary Circuit. Student Guide. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This student guide is for Unit 3, Primary Circuit, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with how to test the primary ignition circuit. A companion review exercise book and posttests are available separately as CE 031 212-213. An introduction tells how this unit fits into the total tune-up service,…

Establishing the Overall Service Quality of Engineering Education: Fuzzy Logic Approach

Science.gov (United States)

Shekhar, N. Chandra; Venkatasubbaiah, K.; Kandukuria, N. R.

2012-01-01

Measuring overall service quality (OSQ) is gaining prominence in higher education due to the increased competition among engineering education institutions (EEIs) and growing awareness about value for money among the public. Determination of OSQ on certain institutional aspects is done by various agencies throughout the world. Each system uses a…

A Process for Capturing the Art of Systems Engineering

Science.gov (United States)

Owens, Clark V., III; Sekeres, Carrie; Roumie, Yasmeen

2016-01-01

There is both an art and a science to systems engineering. The science of systems engineering is effectively captured in processes and procedures, but the art is much more elusive. We propose that there is six step process that can be applied to any systems engineering organization to create an environment from which the "art" of that organization can be captured, be allowed to evolve collaboratively and be shared with all members of the organization. This paper details this process as it was applied to NASA Launch Services Program (LSP) Integration Engineering Branch during a pilot program of Confluence, a Commercial Off The Shelf (COTS) wiki tool.

Anesthesia Service Use During Outpatient Gastroenterology Procedures Continued to Increase From 2010 to 2013 and Potentially Discretionary Spending Remained High.

Science.gov (United States)

Predmore, Zachary; Nie, Xiaoyu; Main, Regan; Mattke, Soeren; Liu, Hangsheng

2017-02-01

Previous studies have identified an increasing number of gastroenterology (GI) procedures using anesthesia services to provide sedation, with a majority of these services delivered to low-risk patients. The aim of this study was to update these trends with the most recent years of data. We used Medicare and commercial claims data from 2010 to 2013 to identify GI procedures and anesthesia services based on CPT codes, which were linked together using patient identifiers and dates of service. We defined low-risk patients as those who were classified as ASA (American Society of Anesthesiologists) physical status class I or II. For those patients without an ASA class listed on the claim, we used a prediction algorithm to impute an ASA physical status. Over 6.6 million patients in our sample had a GI procedure between 2010 and 2013. GI procedures involving anesthesia service accounted for 33.7% in 2010 and 47.6% in 2013 in Medicare patients, and 38.3% in 2010 and 53.0% in 2013 in commercially insured patients. Overall, as more patients used anesthesia services, total anesthesia service use in low-risk patients increased 14%, from 27,191 to 33,181 per million Medicare enrollees. Similarly, we observed a nearly identical uptick in commercially insured patients from 15,871 to 22,247 per million, an increase of almost 15%. During 2010-2013, spending associated with anesthesia services in low-risk patients increased from US$3.14 million to US$3.45 million per million Medicare enrollees and from US$7.69 million to US$10.66 million per million commercially insured patients. During 2010 to 2013, anesthesia service use in GI procedures continued to increase and the proportion of these services rendered for low-risk patients remained high.

Human factoring administrative procedures

International Nuclear Information System (INIS)

Grider, D.A.; Sturdivant, M.H.

1991-01-01

In nonnuclear business, administrative procedures bring to mind such mundane topics as filing correspondence and scheduling vacation time. In the nuclear industry, on the other hand, administrative procedures play a vital role in assuring the safe operation of a facility. For some time now, industry focus has been on improving technical procedures. Significant efforts are under way to produce technical procedure requires that a validated technical, regulatory, and administrative basis be developed and that the technical process be established for each procedure. Producing usable technical procedures requires that procedure presentation be engineered to the same human factors principles used in control room design. The vital safety role of administrative procedures requires that they be just as sound, just a rigorously formulated, and documented as technical procedures. Procedure programs at the Tennessee Valley Authority and at Boston Edison's Pilgrim Station demonstrate that human factors engineering techniques can be applied effectively to technical procedures. With a few modifications, those same techniques can be used to produce more effective administrative procedures. Efforts are under way at the US Department of Energy Nuclear Weapons Complex and at some utilities (Boston Edison, for instance) to apply human factors engineering to administrative procedures: The techniques being adapted include the following

Factors that Influence First-Career Choice of Undergraduate Engineers in Software Services Companies: A South Indian Experience

Science.gov (United States)

Gokuladas, V. K.

2010-01-01

Purpose: The purpose of this paper is to identify how undergraduate engineering students differ in their perception about software services companies in India based on variables like gender, locations of the college and branches of engineering. Design/methodology/approach: Data obtained from 560 undergraduate engineering students who had the…

Engine Tune-up Service. Unit 4: Secondary Circuit. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 4, Secondary Circuit, available separately as CE 031 214. Focus of the exercises and pretests is testing and servicing the secondary ignition circuit. Pretests and performance checklists are provided for each of the seven…

Engine Tune-up Service. Unit 6: Emission Control Systems. Student Guide. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This student guide is for Unit 6, Emission Control Systems, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with inspecting, testing, and servicing an emission control system. A companion review exercise book and posttests are available separately as CE 031 221-222. An introduction tells how this unit fits…

Engine Tune-Up Service. Unit 5: Fuel and Carburetion Systems. Posttests. Automotive Mechanics Curriculum.

Science.gov (United States)

Morse, David T.

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 5, Fuel and Carburetion Systems; available separately as CE 031 217. Focus of the posttests is the inspecting and servicing of the fuel and carburetion systems. One multiple choice posttest is provided that covers the 10 performance objectives…

Plant-specific evaluations of Transamerica Delaval diesel engines for nuclear service

International Nuclear Information System (INIS)

Dingee, D.A.; Laity, W.W.; Nesbitt, J.F.

1985-03-01

This paper discusses the approach taken to evlauate the readiness of Transamerica Delaval, Inc. (TDI) diesel generators for nuclear service at five power plants: Catawba, Comanche Peak, Grand Gulf, San Onofre, and Shoreham. TDI engines in these and other nuclear power plants have been the subject of a coordinated effort by 13 nuclear utilities to address reliability and quality issues. The utilities formed the TDI Diesel Generator Owners' Group and prepared a comprehensive plan for requalifying the engines as emergency power sources. Prior to full implementation of the plan by the Owners' Group and final review of the findings by the US Nuclear Regulatory Commission, several member plants became candidates for operating licenses. The TDI engines in those plants, including the five listed above, were evaluated on a case-by-case basis, taking into consideration the factors discussed in this paper. 2 refs

A Quantitative Analysis of the Relationship between Medicare Payment and Service Volume for Glaucoma Procedures from 2005 through 2009.

Science.gov (United States)

Gong, Dan; Jun, Lin; Tsai, James C

2015-05-01

To calculate the association between Medicare payment and service volume for 6 commonly performed glaucoma procedures. Retrospective, longitudinal database study. A 100% dataset of all glaucoma procedures performed on Medicare Part B beneficiaries within the United States from 2005 to 2009. Fixed-effects regression model using Medicare Part B carrier data for all 50 states and the District of Columbia, controlling for time-invariant carrier-specific characteristics, national trends in glaucoma service volume, Medicare beneficiary population, number of ophthalmologists, and income per capita. Payment-volume elasticities, defined as the percent change in service volume per 1% change in Medicare payment, for laser trabeculoplasty (Current Procedural Terminology [CPT] code 65855), trabeculectomy without previous surgery (CPT code 66170), trabeculectomy with previous surgery (CPT code 66172), aqueous shunt to reservoir (CPT code 66180), laser iridotomy (CPT code 66761), and scleral reinforcement with graft (CPT code 67255). The payment-volume elasticity was nonsignificant for 4 of 6 procedures studied: laser trabeculoplasty (elasticity, -0.27; 95% confidence interval [CI], -1.31 to 0.77; P = 0.61), trabeculectomy without previous surgery (elasticity, -0.42; 95% CI, -0.85 to 0.01; P = 0.053), trabeculectomy with previous surgery (elasticity, -0.28; 95% CI, -0.83 to 0.28; P = 0.32), and aqueous shunt to reservoir (elasticity, -0.47; 95% CI, -3.32 to 2.37; P = 0.74). Two procedures yielded significant associations between Medicare payment and service volume. For laser iridotomy, the payment-volume elasticity was -1.06 (95% CI, -1.39 to -0.72; P payment, laser iridotomy service volume increased by 1.06%. For scleral reinforcement with graft, the payment-volume elasticity was -2.92 (95% CI, -5.72 to -0.12; P = 0.041): for every 1% decrease in CPT code 67255 payment, scleral reinforcement with graft service volume increased by 2.92%. This study calculated the association

Technical engineering services in support of the Nike-Tomahawk sounding rocket vehicle system

Science.gov (United States)

1972-01-01

Task assignments in support of the Nike-Tomahawk vehicles, which were completed from May, 1970 through November 1972 are reported. The services reported include: analytical, design and drafting, fabrication and modification, and field engineering.

Execution techniques for high level radioactive waste disposal. 4. Design and manufacturing procedure of engineered barriers

International Nuclear Information System (INIS)

Ogata, Nobuhide; Kosaki, Akio; Ueda, Hiroyoshi; Asano, Hidekazu; Takao, Hajime

1999-01-01

Ensuring the physical integrity of engineered barriers for an extremely long time period is necessary for geological disposal of high-level radioactive wastes. This report describes the design process and the designed configurations of both overpack and buffer as engineered barriers. Manufacturing procedure, quality control and inspection methods are also summarized. Carbon steel was selected as a structural material of the overpack and the specification of the overpack was determined assuming disposal in the depths of 1000 m below surface of crystalline rock site. The mixture of bentonite and sand (80% sodium bentonite and 20% silica sand by mass) was selected as material for a buffer from mainly its permeability and characteristics of self-sealing of a gap occurred in construction work. Welding method of a lid onto the main body of the overpack, uniting method of a corrosion-resistance layer and the structural component in the case of a composite overpack and manufacturing procedures of both blocks-type and monolithic-type buffers are also investigated. (author)

Distance Support In-Service Engineering for the High Energy Laser

Science.gov (United States)

2015-03-01

FEL only) o Isoplanatic angle (if available) o Fried coherence length o Object distance o Dwell time o Laser spot size While many of the items...system and the HEL system. Acquisition Sensor Laser Subsystem Beam Shaping Sensor Suile . Range Finder -. Coarse Tracker . Fine Tracker Optical...distribution is unlimited DISTANCE SUPPORT IN-SERVICE ENGINEERING FOR THE HIGH ENERGY LASER by Team Raising HEL from a Distance Cohort 311-133O March

Monitoring techniques and alarm procedures for CMS services and sites in WLCG

CERN Document Server

Molina-Perez, Jorge Amando

2012-01-01

The CMS offline computing system is composed of roughly 80 sites (including most experienced T3s) and a number of central services to distribute, process and analyze data worldwide. A high level of stability and reliability is required from the underlying infrastructure and services, partially covered by local or automated monitoring and alarming systems such as Lemon and SLS; the former collects metrics from sensors installed on computing nodes and triggers alarms when values are out of range, the latter measures the quality of service and warns managers when service is affected. CMS has established computing shift procedures with personnel operating worldwide from remote Computing Centers, under the supervision of the Computing Run Coordinator on duty at CERN. This dedicated 24/7 computing shift personnel is contributing to detect and react timely on any unexpected error and hence ensure that CMS workflows are carried out efficiently and in a sustained manner. Synergy among all the involved actors is explo...

Engineering a plant community to deliver multiple ecosystem services.

Science.gov (United States)

Storkey, Jonathan; Döring, Thomas; Baddeley, John; Collins, Rosemary; Roderick, Stephen; Jones, Hannah; Watson, Christine

2015-06-01

The sustainable delivery of multiple ecosystem services requires the management of functionally diverse biological communities. In an agricultural context, an emphasis on food production has often led to a loss of biodiversity to the detriment of other ecosystem services such as the maintenance of soil health and pest regulation. In scenarios where multiple species can be grown together, it may be possible to better balance environmental and agronomic services through the targeted selection of companion species. We used the case study of legume-based cover crops to engineer a plant community that delivered the optimal balance of six ecosystem services: early productivity, regrowth following mowing, weed suppression, support of invertebrates, soil fertility building (measured as yield of following crop), and conservation of nutrients in the soil. An experimental species pool of 12 cultivated legume species was screened for a range of functional traits and ecosystem services at five sites across a geographical gradient in the United Kingdom. All possible species combinations were then analyzed, using a process-based model of plant competition, to identify the community that delivered the best balance of services at each site. In our system, low to intermediate levels of species richness (one to four species) that exploited functional contrasts in growth habit and phenology were identified as being optimal. The optimal solution was determined largely by the number of species and functional diversity represented by the starting species pool, emphasizing the importance of the initial selection of species for the screening experiments. The approach of using relationships between functional traits and ecosystem services to design multifunctional biological communities has the potential to inform the design of agricultural systems that better balance agronomic and environmental services and meet the current objective of European agricultural policy to maintain viable food

Perm State University HPC-hardware and software services: capabilities for aircraft engine aeroacoustics problems solving

Science.gov (United States)

Demenev, A. G.

2018-02-01

The present work is devoted to analyze high-performance computing (HPC) infrastructure capabilities for aircraft engine aeroacoustics problems solving at Perm State University. We explore here the ability to develop new computational aeroacoustics methods/solvers for computer-aided engineering (CAE) systems to handle complicated industrial problems of engine noise prediction. Leading aircraft engine engineering company, including “UEC-Aviadvigatel” JSC (our industrial partners in Perm, Russia), require that methods/solvers to optimize geometry of aircraft engine for fan noise reduction. We analysed Perm State University HPC-hardware resources and software services to use efficiently. The performed results demonstrate that Perm State University HPC-infrastructure are mature enough to face out industrial-like problems of development CAE-system with HPC-method and CFD-solvers.

Hand washing frequencies and procedures used in retail food services.

Science.gov (United States)

Strohbehn, Catherine; Sneed, Jeannie; Paez, Paola; Meyer, Janell

2008-08-01

Transmission of viruses, bacteria, and parasites to food by way of improperly washed hands is a major contributing factor in the spread of foodborne illnesses. Field observers have assessed compliance with hand washing regulations, yet few studies have included consideration of frequency and methods used by sectors of the food service industry or have included benchmarks for hand washing. Five 3-h observation periods of employee (n = 80) hand washing behaviors during menu production, service, and cleaning were conducted in 16 food service operations for a total of 240 h of direct observation. Four operations from each of four sectors of the retail food service industry participated in the study: assisted living for the elderly, childcare, restaurants, and schools. A validated observation form, based on 2005 Food Code guidelines, was used by two trained researchers. Researchers noted when hands should have been washed, when hands were washed, and how hands were washed. Overall compliance with Food Code recommendations for frequency during production, service, and cleaning phases ranged from 5% in restaurants to 33% in assisted living facilities. Procedural compliance rates also were low. Proposed benchmarks for the number of times hand washing should occur by each employee for each sector of food service during each phase of operation are seven times per hour for assisted living, nine times per hour for childcare, 29 times per hour for restaurants, and 11 times per hour for schools. These benchmarks are high, especially for restaurant employees. Implementation would mean lost productivity and potential for dermatitis; thus, active managerial control over work assignments is needed. These benchmarks can be used for training and to guide employee hand washing behaviors.

Development of quantitative evaluation procedure of in-service materials degradation

International Nuclear Information System (INIS)

Takahashi, Hideaki

1992-01-01

The quantitative nondestructive evaluation procedure for detecting in-service materials degradation of low alloy structural steels by both small punch test and the electrochemical method has been developed. The static and dynamic small punch test method have been developed in order to apply this technique to R and D study for fusion reactor material development, such as 14 MeV irradiation damage evaluation. The characteristic changes in polarization curves attributed to IGC have an excellent correlation with shifts in FATT caused by temper embrittlement for Cr-Mo and Cr-Mo-V steels. (author)

Human Engineering Procedures Guide

Science.gov (United States)

1981-09-01

Research Laboratory AFETR Air Force Eastern Test Range AFFTC Air Force Flight Test Center AFHRL Air Force Human Resources Laboratory AFR Air Force...performance requirements through the most effective use of man’s performance capability. 13 Human Engineering is one of five elements in the Human...applied judiciously and tailored to fit * the program or program phase and the acquisition strategy to achieve cost effective acquisition and life cycle

Applying industrial engineering practices to radiology.

Science.gov (United States)

Rosen, Len

2004-01-01

Seven hospitals in Oregon and Washington have successfully adopted the Toyota Production System (TPS). Developed by Taiichi Ohno, TPS focuses on finding efficiencies and cost savings in manufacturing processes. A similar effort has occurred in Canada, where Toronto's Hospital for Sick Children has developed a database for its diagnostic imaging department built on the principles of TPS applied to patient encounters. Developed over the last 5 years, the database currently manages all interventional patient procedures for quality assurance, inventory, equipment, and labor. By applying industrial engineering methodology to manufacturing processes, it is possible to manage these constraints, eliminate the obstacles to achieving streamlined processes, and keep the cost of delivering products and services under control. Industrial engineering methodology has encouraged all stakeholders in manufacturing plants to become participants in dealing with constraints. It has empowered those on the shop floor as well as management to become partners in the change process. Using a manufacturing process model to organize patient procedures enables imaging department and imaging centers to generate reports that can help them understand utilization of labor, materials, equipment, and rooms. Administrators can determine the cost of individual procedures as well as the total and average cost of specific procedure types. When Toronto's Hospital for Sick Children first implemented industrial engineering methodology to medical imaging interventional radiology patient encounters, it focused on materials management. Early in the process, the return on investment became apparent as the department improved its management of more than 500,000 dollars of inventory. The calculated accumulated savings over 4 years for 10,000 interventional procedures alone amounted to more than 140,000 dollars. The medical imaging department in this hospital is only now beginning to apply what it has learned to

Engine Tune-up Service. Unit 6: Emission Control Systems. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 6, Emission Control Systems, available separately as CE 031 220. Focus of the exercises and pretests is inspecting, testing, and servicing emission control systems. Pretests and performance checklists are provided for each of the…

76 FR 21851 - Defense Federal Acquisition Regulation Supplement; Construction and Architect-Engineer Services...

Science.gov (United States)

2011-04-19

...://regulations.gov , including any personal information provided. To confirm receipt of your comment, please... impacts, and equity). Executive Order 13563 emphasizes the importance of quantifying both costs and... terminated for default regardless of contract value. For Architect and Engineer (A&E) services, past...

New Procedure for Account Operations at the CERN Service Desk

CERN Multimedia

The Computer Security Team

2011-01-01

Who can activate your computing account? Who can unblock it? And who can reset your password if you've forgotten it? Until recently, users who addressed such problems to the Service Desk were asked a set of questions...   The corresponding answers were designed to properly verify the requestor’s identity such that only the real owner could activate/unblock/reset his computing account. However, it turned out that the answers were easily obtainable (and that there is no better set of questions to ask). Therefore, in order to ensure optimal protection of your account, this procedure will be replaced on 28 November 2011. From that date on, users will be asked to produce a physical ID when requesting the Service Desk to perform operations like computer account activation, account unblocking or password resets. This physical ID can either be a passport/ID card or the CERN access card. If you need to activate/unblock/reset your computing account, you will either have to produ...

Engine Tune-Up Service. Unit 5: Fuel and Carburetion Systems. Student Guide. Automotive Mechanics Curriculum.

Science.gov (United States)

Goodson, Ludy

This student guide is for Unit 5, Fuel and Carburetion Systems, in the Engine Tune-Up Service portion of the Automotive Mechanics Curriculum. It deals with inspecting and servicing the fuel and carburetion systems. A companion review exercise book and posttests are available separately as CE 031 218-219. An introduction tells how this unit fits…

Using Participatory and Service Design to Identify Emerging Needs and Perceptions of Library Services among Science and Engineering Researchers Based at a Satellite Campus

Science.gov (United States)

Johnson, Andrew; Kuglitsch, Rebecca; Bresnahan, Megan

2015-01-01

This study used participatory and service design methods to identify emerging research needs and existing perceptions of library services among science and engineering faculty, post-graduate, and graduate student researchers based at a satellite campus at the University of Colorado Boulder. These methods, and the results of the study, allowed us…

Industrial applications of radioisotopes: techniques and procedures of (NTIS) Nuclear Techniques Industrial Service

International Nuclear Information System (INIS)

Smith, S.W.; Kruger, J.

1985-06-01

Radioisotope handling procedures followed by personnel of the Nuclear Techniques Industrial Service (NTIS) during the conduction of investigations in industry are described. Possible radiological implications as a result of the various measuring techniques and different types of plants are discussed. Conditions under which permanent authorization has been granted for the use of radioisotopes are mentioned

Engine Tune-Up Service. Unit 3: Primary Circuit. Posttests. Automotive Mechanics Curriculum.

Science.gov (United States)

Morse, David T.

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 3, Primary Circuit, available separately as CE 031 211. Focus of the posttests is setting the primary ignition circuit. One multiple choice posttest is provided, covering the eight performance objectives contained in the unit. (No answer key is…

Experimentally Validated Combustion and Piston Fatigue Life Evaluation Procedures for the Bi-Fuel Engines, Using an Integral-Type Fatigue Criterion

Directory of Open Access Journals (Sweden)

M. Shariyat

Full Text Available Abstract A relatively complete procedure for high cycle fatigue life assessment of the engine components is outlined in the present paper. The piston is examined as a typical component of the engine. In this regard, combustion process and transient heat transfer simulations, determination of the instantaneous variations of the pressure and temperature in the combustion chamber, kinematic and dynamic analyses of the moving parts of the engine, thermoelastic stress analyses, and fatigue life analyses are accomplished. Results of the simulation are compared with the test data to verify the results. The heat transfer results are validated by the experimental results measured by the Templugs. The nonlinear multipoint contact constraints are modeled accurately. Results of the more accurate available fatigue criteria are compared with those of a fatigue criterion recently proposed by the first author. These results are also evaluated by comparing them with the experimental durability tests. The presented procedure may be used, e.g., to decide whether it is suitable to convert a gasoline-based engine to a bi-fuel one. Results of the various thermomechanical fatigue analyses performed reveal that the piston life decreases considerably when natural gas is used instead of gasoline.

Fueling Chemical Engineering Concepts with Biodiesel Production: A Professional Development Experience for High School Pre-Service Teachers

Science.gov (United States)

Gupta, Anju

2015-01-01

This one-day workshop for pre-service teachers was aimed at implementing a uniquely designed and ready-to-implement chemical engineering curriculum in high school coursework. This educational and professional development opportunity introduced: 1) chemical engineering curriculum and career opportunities, 2) basic industrial processes and flow…

Marketing health services: the engineering of satisfaction.

Science.gov (United States)

MacStravic, R S

1984-12-01

Service marketing is the engineering of satisfaction, and the key to success is to identify and influence potential customers' expectations and then to fulfill those expectations. Patient satisfaction largely determines both a program's revenues and expenditures and the effectiveness of care received by patients. A program's ability to satisfy patients rests upon three basic elements: research, design, and communication. Research should be on two levels. The first is basic market assessment and analysis, and should reveal overall market potential by focusing on consumers' expectations, unmet needs, and level of satisfaction. From this stage of research, the organization should be able to identify current programs that are secure and stable, those which have significant growth potential, those which are threatened by competition, and those which have little future. This research also should indicate the potential for new programs and for new markets for existing programs. The second level of research focuses on a specific program (whether current or proposed) and is the basis for program design. The organization can tailor the program to consumers' expectations in everything from services provided to price of parking and other amenities. Research also provides a basis for communications. Not only can communications influence a potential customer to try a provider, but also care providers can use communications during and after the service experience to reinforce what might have been a casual decision. Ideally, all communication that occurs between patients and providers should serve marketing as well as diagnostic and therapeutic purposes. It can shape patients' expectations, reinforce satisfaction when those expectations have been fulfilled, and convey the provider's caring and concern.

78 FR 22490 - Administrative Practice and Procedure; Postal Service; Review of Price Cap Rules

Science.gov (United States)

2013-04-16

...] Administrative Practice and Procedure; Postal Service; Review of Price Cap Rules AGENCY: Postal Regulatory Commission. ACTION: Proposed rule. SUMMARY: The Commission is initiating a review of its Price Cap Rules. The... implemented without a price cap calculation. Docket No. R2011-5, Order Approving Market Dominant Price...

Engine Tune-up Service. Unit 2: Charging System. Posttests. Automotive Mechanics Curriculum.

Science.gov (United States)

Richardson, Roger L.; Bacon, E. Miles

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 2, Charging System, available separately as CE 031 208. Focus of the posttest is on the testing of the charging system. One multiple choice posttest is provided, that covers the three performance objectives contained in the unit. (No answer key is…

Corporate Services | College of Engineering & Applied Science

Science.gov (United States)

Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

Payment Procedures for Electronic Government Services

OpenAIRE

Pousttchi, Key; Wiedemann, Dietmar Georg

2005-01-01

In this paper, we analyse payment procedures for their suitability for electronic government. We provide an overview of the payment procedures currently available on the market, compare the situation in electronic government with the situation in electronic commerce and analyze what we can transfer. Based on functional requirements we propose a scheme that allows public agencies to examine the appropriateness of any given payment procedure for electronic government.

GENERATION OF MULTI-LOD 3D CITY MODELS IN CITYGML WITH THE PROCEDURAL MODELLING ENGINE RANDOM3DCITY

Directory of Open Access Journals (Sweden)

F. Biljecki

2016-09-01

Full Text Available The production and dissemination of semantic 3D city models is rapidly increasing benefiting a growing number of use cases. However, their availability in multiple LODs and in the CityGML format is still problematic in practice. This hinders applications and experiments where multi-LOD datasets are required as input, for instance, to determine the performance of different LODs in a spatial analysis. An alternative approach to obtain 3D city models is to generate them with procedural modelling, which is – as we discuss in this paper – well suited as a method to source multi-LOD datasets useful for a number of applications. However, procedural modelling has not yet been employed for this purpose. Therefore, we have developed RANDOM3DCITY, an experimental procedural modelling engine for generating synthetic datasets of buildings and other urban features. The engine is designed to produce models in CityGML and does so in multiple LODs. Besides the generation of multiple geometric LODs, we implement the realisation of multiple levels of spatiosemantic coherence, geometric reference variants, and indoor representations. As a result of their permutations, each building can be generated in 392 different CityGML representations, an unprecedented number of modelling variants of the same feature. The datasets produced by RANDOM3DCITY are suited for several applications, as we show in this paper with documented uses. The developed engine is available under an open-source licence at Github at http://github.com/tudelft3d/Random3Dcity.

Green Turning Brown - Domain Engineering for Social and Health Services in Finland.

Science.gov (United States)

Suomi, Reima; Nykänen, Pirkko; Vepsäläinen, Tapio; Hiltunen, Riina

2017-01-01

Being able to design information systems to an untouched domain, without the burden of existing information systems, especially legacy systems, is often seen as a dream of most information system professionals. Uncharted domains are anyway scarce, and often such greenfield projects turn into brownfield projects, also to projects where existing structures severely constrain the development of new systems. In this article we discuss the concepts of greenfield and brownfield domain engineering and software development, and reflect their possible messages to the re-engineering of the Finnish health- and social care ecosystem currently under way. In our fieldwork we could identify a lot of need and wish for greenfield domain engineering in the Finnish health and social services delivery. As well we found a lot of brownfield elements inhibiting change. Our proposal for the future is a ecosystem approach, where new and established elements could live together in a self-governed balance.

Servant leadership, procedural justice climate, service climate, employee attitudes, and organizational citizenship behavior: a cross-level investigation.

Science.gov (United States)

Walumbwa, Fred O; Hartnell, Chad A; Oke, Adegoke

2010-05-01

This study tests the influence of servant leadership on 2 group climates, employee attitudes, and organizational citizenship behavior. Results from a sample of 815 employees and 123 immediate supervisors revealed that commitment to the supervisor, self-efficacy, procedural justice climate, and service climate partially mediated the relationship between servant leadership and organizational citizenship behavior. Cross-level interaction results revealed that procedural justice climate and positive service climate amplified the influence of commitment to the supervisor on organizational citizenship behavior. Implications of these results for theory and practice and directions for future research are discussed. PsycINFO Database Record (c) 2010 APA, all rights reserved.

Technology and Engineering Education Accommodation Service Profile: An Ex Post Facto Research Design

Science.gov (United States)

Ernst, Jeremy V.; Williams, Thomas O., Jr.

2014-01-01

Technology and engineering educators have an opportunity to serve a vital role in contributing to or assisting in the guidance of educational programming for students qualifying for accommodation services. Within this article, students referred to as at-risk were from two specific special populations within this group: individuals with…

Critical needs for piston engine overhaul centre in Malaysia

Science.gov (United States)

Khairuddin, M. H.; Yahya, M. Y.; Johari, M. K.

2017-12-01

Piston engine overhaul centre (PEOC) is the branch of aviation Maintenance, Repair and Overhaul (MRO) providers, which plays a pivotal role in maintaining the fleet of business and commercial aircraft in the world. The centre typically offers three main MRO capabilities: airframe, engine and component services. Companies holding a PEOC(s) are all subjected to stringent procedures and conditions regulated and audited by the International Civil Aviation Organization. Currently, piston engine maintenance and repair for Asian countries is conducted only in Singapore. The focus of this study is to establish the needs for a PEOC in Malaysia, which will cater almost all small local aircraft companies such as transport and flying school companies.

Providing engineering services to counties.

Science.gov (United States)

2008-09-01

An engineer is required by law to safeguard the health, safety and welfare of the public. The current Kansas : statute state, The Board of County Commissioners of each county shall appoint a licensed professional : engineer, whose title shall be c...

Professional Service innovations at Consulting Engineering - how change stay flat in project Organisations

DEFF Research Database (Denmark)

Koch, Christian; Bendixen, Mads

understood through a practicebased theory approach using predominantly Actor Network Theory (Latour 2005). The paper focus on attempts to innovate service products, within projects and the remaining organisation. A seven-year cooperation with a consulting engineering, now employing the one of the authors has...... production. One relates to the formation of a building envelope group and a design of a building with a double glass facade, the other to client counselling on realising a public private partnership, a 30 year contract of a public service, where the initial programming was followed. The analysis follows...

[Management of chemical burns and inhalation poisonings in acute medical care procedures of the State Fire Service].

Science.gov (United States)

Chomoncik, Mariusz; Nitecki, Jacek; Ogonowska, Dorota; Cisoń-Apanasewicz, Urszula; Potok, Halina

2013-01-01

Emergency Medical Services (EMS) were founded by the government to perform tasks aimed at providing people with help in life-threatening conditions. The system comprises two constituent parts. The first one is public administrative bodies which are to organise, plan, coordinate and supervise the completion of the tasks. The other constituent is EMS units which keep people, resources and units in readiness. Supportive services, which include: the State Fire Service (SFS) and the National Firefighting and Rescue System (NFRS), are of great importance for EMS because they are eligible for providing acute medical care (professional first aid). Acute medical care covers actions performed by rescue workers to help people in life-threatening conditions. Rescue workers provide acute medical care in situations when EMS are not present on the spot and the injured party can be accessed only with the use of professional equipment by trained workers of NFRS. Whenever necessary, workers of supportive services can assist paramedics' actions. Cooperation of all units of EMS and NFRS is very important for rescue operations in the integrated rescue system. Time is a key aspect in delivering first aid to a person in life-threatening conditions. Fast and efficient first aid given by the accident's witness, as well as acute medical care performed by a rescue worker can prevent death and minimise negative effects of an injury or intoxication. It is essential that people delivering first aid and acute medical care should act according to acknowledged and standardised procedures because only in this way can the process of decision making be sped up and consequently, the number of possible complications following accidents decreased. The present paper presents an analysis of legal regulations concerning the management of chemical burn and inhalant intoxication in acute medical care procedures of the State Fire Service. It was observed that the procedures for rescue workers entitled to

Establishing sustainable strategies in urban underground engineering.

Science.gov (United States)

Curiel-Esparza, Jorge; Canto-Perello, Julian; Calvo, Maria A

2004-07-01

Growth of urban areas, the corresponding increased demand for utility services and the possibility of new types of utility systems are overcrowding near surface underground space with urban utilities. Available subsurface space will continue to diminish to the point where utilidors (utility tunnels) may become inevitable. Establishing future sustainable strategies in urban underground engineering consists of the ability to lessen the use of traditional trenching. There is an increasing interest in utility tunnels for urban areas as a sustainable technique to avoid congestion of the subsurface. One of the principal advantages of utility tunnels is the substantially lower environmental impact compared with common trenches. Implementing these underground facilities is retarded most by the initial cost and management procedures. The habitual procedure is to meet problems as they arise in current practice. The moral imperative of sustainable strategies fails to confront the economic and political conflicts of interest. Municipal engineers should act as a key enabler in urban underground sustainable development.

39 CFR 5.2 - Committee procedure.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Committee procedure. 5.2 Section 5.2 Postal Service UNITED STATES POSTAL SERVICE THE BOARD OF GOVERNORS OF THE U.S. POSTAL SERVICE COMMITTEES (ARTICLE V) § 5.2 Committee procedure. Each committee establishes its own rules of procedure, consistent with...

Technical procedures for utilities and solid waste: Environmental Field Program, Deaf Smith County site, Texas: Final draft

International Nuclear Information System (INIS)

1987-08-01

The evaluation of environmental issues and concerns and the addressing of statutory requirements are fundamental parts in the characterization of the site in Deaf Smith County, Texas for the US Department of Energy's Salt Repository Project (SRP). To ensure that the environmental field program comprehensively addresses the issues and requirements of the project, a site study plan (SSP) has been prepared for Utilities and Solid Waste considerations. This technical procedure (TP) has been developed to implement the field program described in the Utilities and Solid Waste Site Study Plan. The purpose and scope of the Utilities and Solid Waste Technical Procedure is to develop and implement a data collection procedure to fulfill the data base needs of the Utilities and Solid Waste SSP. The procedure describes a method of obtaining, assessing and verifying the capabilities of the regional service utilities and disposal contractors. This data base can be used to identify a preferred service source for the engineering contractor. The technical procedure was produced under the guidelines established in Technical Administrative Procedure No. 1.0, Preparation, Review and Approval of Technical Procedures

AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT VII, ENGINE TUNE-UP--DETROIT DIESEL ENGINE.

Science.gov (United States)

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF TUNE-UP PROCEDURES FOR DIESEL ENGINES. TOPICS ARE SCHEDULING TUNE-UPS, AND TUNE-UP PROCEDURES. THE MODULE CONSISTS OF A SELF-INSTRUCTIONAL BRANCH PROGRAMED TRAINING FILM "ENGINE TUNE-UP--DETROIT DIESEL ENGINE" AND OTHER MATERIALS. SEE VT 005 655 FOR FURTHER INFORMATION.…

Aging and service wear of diesel engines used for emergency power at nuclear power stations

International Nuclear Information System (INIS)

Dingee, P.A.; Johnson, A.B.

1985-01-01

Aging and wear problems associated with emergency standby diesel generators are under study as part of the US Nuclear Regulatory Commission Nuclear Plant Aging Research program. Aging/wear factors identified in this study to date include chemical, mechanical, electrochemical, and bacterial mechanisms. The study also examines the potential of excessive engine testing as a cause of premature wear. To date, the results of this effort are not conclusive. An assessment of current wear mitigation measures such as engine maintenance and surveillance procedures suggests the need for their further development within the nuclear industry

Effectiveness of a multidevice 3D virtual environment application to train car service maintenance procedures

NARCIS (Netherlands)

Borsci, Simone; Lawson, Glyn; Jha, Bhavna; Burges, Mark; Salanitri, Davide

2016-01-01

This paper reports a study which demonstrates the advantages of using virtual-reality-based systems for training automotive assembly tasks. Sixty participants were randomly assigned to one of the following three training experiences to learn a car service procedure: (1) observational training

Using Student Video Cases to Assess Pre-service Elementary Teachers' Engineering Teaching Responsiveness

Science.gov (United States)

Dalvi, Tejaswini; Wendell, Kristen

2017-10-01

Our study addresses the need for new approaches to prepare novice elementary teachers to teach both science and engineering, and for new tools to measure how well those approaches are working. This in particular would inform the teacher educators of the extent to which novice teachers are developing expertise in facilitating their students' engineering design work. One important dimension to measure is novice teachers' abilities to notice the substance of student thinking and to respond in productive ways. This teacher noticing is particularly important in science and engineering education, where students' initial, idiosyncratic ideas and practices influence the likelihood that particular instructional strategies will help them learn. This paper describes evidence of validity and reliability for the Video Case Diagnosis (VCD) task, a new instrument for measuring pre-service elementary teachers' engineering teaching responsiveness. To complete the VCD, participants view a 6-min video episode of children solving an engineering design problem, describe in writing what they notice about the students' science ideas and engineering practices, and propose how a teacher could productively respond to the students. The rubric for scoring VCD responses allowed two independent scorers to achieve inter-rater reliability. Content analysis of the video episode, systematic review of literature on science and engineering practices, and solicitation of external expert educator responses establish content validity for VCD. Field test results with three different participant groups who have different levels of engineering education experience offer evidence of construct validity.

Engine Tune-Up Service. Unit 5: Fuel and Carburetion Systems. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Goodson, Ludy

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 5, Fuel and Carburetion Systems, available separately as CE 031 217. Focus of the exercises and pretests is inspecting and servicing the fuel and carburetion systems. Pretests and performance checklists are provided for each of the…

77 FR 65823 - Control of Air Pollution From Aircraft and Aircraft Engines; Emission Standards and Test Procedures

Science.gov (United States)

2012-10-31

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Parts 87 [EPA-HQ-OAR-2010-0687; FRL-9678-1] RIN 2060-AO70 Control of Air Pollution From Aircraft and Aircraft Engines; Emission Standards and Test Procedures Correction In rule document 2012-13828 appearing on pages 36341-36386 in the issue of Monday, June 18, 2012, make the following corrections: Sec. 87.2...

Rehabilitation Engineering Service Evaluation: A Follow-Up Survey of Device Effectiveness and Patient Acceptance.

Science.gov (United States)

Caudrey, David J.; Seeger, Barry R.

1983-01-01

A study was undertaken to determine the extent to which a rehabilitation engineering service met the needs and expectations of 100 patients (or parents of child patients). The patients were interviewed an average of 16 weeks after a new piece of equipment was supplied. (Author)

Implementation of the Orbital Maneuvering Systems Engine and Thrust Vector Control for the European Service Module

Science.gov (United States)

Millard, Jon

2014-01-01

The European Space Agency (ESA) has entered into a partnership with the National Aeronautics and Space Administration (NASA) to develop and provide the Service Module (SM) for the Orion Multipurpose Crew Vehicle (MPCV) Program. The European Service Module (ESM) will provide main engine thrust by utilizing the Space Shuttle Program Orbital Maneuvering System Engine (OMS-E). Thrust Vector Control (TVC) of the OMS-E will be provided by the Orbital Maneuvering System (OMS) TVC, also used during the Space Shuttle Program. NASA will be providing the OMS-E and OMS TVC to ESA as Government Furnished Equipment (GFE) to integrate into the ESM. This presentation will describe the OMS-E and OMS TVC and discuss the implementation of the hardware for the ESM.

Development of residual stress analysis procedure for fitness-for-service assessment of welded structure

International Nuclear Information System (INIS)

Kim, Jong Sung; Jin, Tae Eun; Dong, P.; Prager, M.

2003-01-01

In this study, a state of art review of existing residual stress analysis techniques and representative solutions is presented in order to develop the residual stress analysis procedure for Fitness-For-Service(FFS) assessment of welded structure. Critical issues associated with existing residual stress solutions and their treatments in performing FFS are discussed. It should be recognized that detailed residual stress evolution is an extremely complicated phenomenon that typically involves material-specific thermomechanical/metallurgical response, welding process physics, and structural interactions within a component being welded. As a result, computational procedures can vary significantly from highly complicated numerical techniques intended only to elucidate a small part of the process physics to cost-effective procedures that are deemed adequate for capturing some of the important features in a final residual stress distribution. Residual stress analysis procedure for FFS purposes belongs to the latter category. With this in mind, both residual stress analysis techniques and their adequacy for FFS are assessed based on both literature data and analyses performed in this investigation

Radiological engineering services for the design of special contamination containments. Final report

International Nuclear Information System (INIS)

1996-01-01

The purpose of this study was to provide radiological engineering services for the design of special contamination containments. These containments were to be used during the replacement of leaking and damaged gaskets on the glove boxes in Technical Area-55 (TA-55). The damaged gaskets involved 18 windows and 5 interconnecting spool pieces in fuel processing glove boxes. The work scope included the design and manufacture of special contamination containment enclosures (containments), the preparation of procedures and tool lists to support gasket replacement while using the containments, and the training of appropriate TA-55 personnel in the proper installation, operation and removal of the containments. It was originally anticipated that two basic containment designs would be required, one for the windows and one for spool pieces. Upon examination of the glove boxes it was evident that the individual space envelopes and interferences associated with each glove box would require uniquely designed containments for effective gasket replacement. This resulted in 13 individual containment designs that accommodated the interferences and allowed gasket replacement within the containment. Successful use of the containments for glove box gasket replacement was a significant accomplishment. The operation has proven that a properly managed containment program can enhance routine maintenance of the glove boxes while preventing a contamination release. The ability to perform these operations in containments reduces costs by preventing a contaminant release and eliminating the associated cleanup expenses, reduced radioactive waste and fuel processing down time

Career Services | College of Engineering & Applied Science

Science.gov (United States)

@ 10:00 am - 2:00 pm Wisconsin Room, UWM Student Union Register today! Engineering Careers Careers in Engineering Concentration on Ergonomics M.S. Program in Computer Science Interdisciplinary Concentration on Energy Doctoral Programs in Engineering Non-Degree Candidate Departments Biomedical Engineering

The Use of Online Current Awareness Services by Natural Sciences and Engineering Faculty at Western Michigan University

Science.gov (United States)

Leatherman, Carrie C.; Eckel, Edward J.

2012-01-01

Nearly every commercial database that covers natural sciences and engineering offers some type of current awareness (CA) service that provides regular updates to users on current literature in a selected field of interest. Current awareness services include e-mail alerts, tables of contents, and RSS feeds. This study was designed to find out what…

Educating the humanitarian engineer.

Science.gov (United States)

Passino, Kevin M

2009-12-01

The creation of new technologies that serve humanity holds the potential to help end global poverty. Unfortunately, relatively little is done in engineering education to support engineers' humanitarian efforts. Here, various strategies are introduced to augment the teaching of engineering ethics with the goal of encouraging engineers to serve as effective volunteers for community service. First, codes of ethics, moral frameworks, and comparative analysis of professional service standards lay the foundation for expectations for voluntary service in the engineering profession. Second, standard coverage of global issues in engineering ethics educates humanitarian engineers about aspects of the community that influence technical design constraints encountered in practice. Sample assignments on volunteerism are provided, including a prototypical design problem that integrates community constraints into a technical design problem in a novel way. Third, it is shown how extracurricular engineering organizations can provide a theory-practice approach to education in volunteerism. Sample completed projects are described for both undergraduates and graduate students. The student organization approach is contrasted with the service-learning approach. Finally, long-term goals for establishing better infrastructure are identified for educating the humanitarian engineer in the university, and supporting life-long activities of humanitarian engineers.

Experience within the CERN Civil Engineering Group with Outsourced Design Services

CERN Document Server

Watson, T

1998-01-01

In April 1996, CERN awarded three contracts for civil engineering design services associated with the LHC project. The three contracts were awarded to three different joint ventures of firms from five member states. The total bid price for these services was in excess of 35 MCHF and the contracts will run for up to seven years. This paper aims to discuss and analyze the experience gained to date in the management of these contracts. In particular, the paper will address the issues of conditions of contract and specification for this form of contract. Current experience with each of the three consultants will be presented with the areas of difficulty highlighted. Conclusions will be made regarding future use of such contracts and in particular the way in which CERN must change in order to work efficiently with external designers.

Semantic Service Search, Service Evaluation and Ranking in Service Oriented Environment

Science.gov (United States)

Dong, Hai; Hussain, Farookh Khadeer; Chang, Elizabeth

The theory of Service Oriented Environment (SOE) emerges with advanced connectivity of the Internet technologies, openness of business environment and prosperousness of business activities. Service, as a critical object impenetrating every corner of SOE, is a hot research topic in many research domains. Software Engineering (SE), as a subject in engineering field, its researchers pay more attention to supporting advanced technologies for promoting service activities in SOE. In this paper, we draw the position in the research field of semantic service search, service evaluation and ranking in SOE. By means of the case study and literature review research approach, we discover the research motivations and research issues in this field.

28 CFR Appendix C to Part 61 - Immigration and Naturalization Service Procedures Relating to the Implementation of the National...

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Immigration and Naturalization Service... ENVIRONMENTAL POLICY ACT Pt. 61, App. C Appendix C to Part 61—Immigration and Naturalization Service Procedures..., construction, and maintenance of new and existing INS facilities. All activities concerning the Immigration and...

Medical Virtual Public Services

Directory of Open Access Journals (Sweden)

Iulia SURUGIU

2008-01-01

Full Text Available The healthcare enterprises are very disconnected. This paper intends to propose a solution that will provide citizens, businesses and medical enterprises with improved access to medical virtual public services. Referred medical services are based on existing national medical Web services and which support medically required services provided by physicians and supplementary health care practitioners, laboratory services and diagnostic procedures, clinics and hospitals’ services. Requirements and specific rules of these medical services are considered, and personalization of user preferences will to be supported. The architecture is based on adaptable process management technologies, allowing for virtual services which are dynamically combined from existing national medical services. In this way, a comprehensive workflow process is set up, allowing for service-level agreements, an audit trail and explanation of the process to the end user. The process engine operates on top of a virtual repository, providing a high-level semantic view of information retrieved from heterogeneous information sources, such as national sources of medical services. The system relies on a security framework to ensure all high-level security requirements are met. System’s architecture is business oriented: it focuses on Service Oriented Architecture - SOA concepts, asynchronously combining Web services, Business Process Management – BPM rules and BPEL standards.

Engineering and management of IT-based service systems an intelligent decision-making support systems approach

CERN Document Server

Gomez, Jorge; Garrido, Leonardo; Perez, Francisco

2014-01-01

Intelligent Decision-Making Support Systems (i-DMSS) are specialized IT-based systems that support some or several phases of the individual, team, organizational or inter-organizational decision making process by deploying some or several intelligent mechanisms. This book pursues the following academic aims: (i) generate a compendium of quality theoretical and applied contributions in Intelligent Decision-Making Support Systems (i-DMSS) for engineering and management IT-based service systems (ITSS); (ii)  diffuse scarce knowledge about foundations, architectures and effective and efficient methods and strategies for successfully planning, designing, building, operating, and evaluating i-DMSS for ITSS, and (iii) create an awareness of, and a bridge between ITSS and i-DMSS academicians and practitioners in the current complex and dynamic engineering and management ITSS organizational. The book presents a collection of 11 chapters referring to relevant topics for both IT service systems and i-DMSS including: pr...

Propagation Engineering in Wireless Communications

CERN Document Server

Ghasemi, Abdollah; Ghasemi, Farshid

2012-01-01

Wireless communications has seen explosive growth in recent decades, in a realm that is both broad and rapidly expanding to include satellite services, navigational aids, remote sensing, telemetering, audio and video broadcasting, high-speed data communications, mobile radio systems and much more. Propagation Engineering in Wireless Communications deals with the basic principles of radiowaves propagation for frequency bands used in radio-communications, offering descriptions of new achievements and newly developed propagation models. The book bridges the gap between theoretical calculations and approaches, and applied procedures needed for advanced radio links design. The primary objective of this two-volume set is to demonstrate the fundamentals, and to introduce propagation phenomena and mechanisms that engineers are likely to encounter in the design and evaluation of radio links of a given type and operating frequency. Volume one covers basic principles, along with tropospheric and ionospheric propagation,...

A Numerical Model for Estimation of Service Life of Tribological Systems of the Piston Engine

Directory of Open Access Journals (Sweden)

K. Gavrilov

2017-09-01

Full Text Available This article describes, develops and applies approach of the interaction of rough surfaces for one of the tasks of simulation of tribological systems of the piston engine. In this paper we described the general approach to building a model of interaction between rough surfaces, leading to the analysis of the Markov process. Given the initial data and the method of calculating the trajectory of movable elements on the lubricating layer, we determined the tribological parameters defining the service life of tribological systems of the piston engine on the example of crankshaft bearings.

Stirling engine design manual

Science.gov (United States)

Martini, W. R.

1978-01-01

This manual is intended to serve both as an introduction to Stirling engine analysis methods and as a key to the open literature on Stirling engines. Over 800 references are listed and these are cross referenced by date of publication, author and subject. Engine analysis is treated starting from elementary principles and working through cycles analysis. Analysis methodologies are classified as first, second or third order depending upon degree of complexity and probable application; first order for preliminary engine studies, second order for performance prediction and engine optimization, and third order for detailed hardware evaluation and engine research. A few comparisons between theory and experiment are made. A second order design procedure is documented step by step with calculation sheets and a worked out example to follow. Current high power engines are briefly described and a directory of companies and individuals who are active in Stirling engine development is included. Much remains to be done. Some of the more complicated and potentially very useful design procedures are now only referred to. Future support will enable a more thorough job of comparing all available design procedures against experimental data which should soon be available.

Methodologic model to scheduling on service systems: a software engineering approach

Directory of Open Access Journals (Sweden)

Eduyn Ramiro Lopez-Santana

2016-06-01

Full Text Available This paper presents an approach of software engineering to a research proposal to make an Expert System to scheduling on service systems using methodologies and processes of software development. We use the adaptive software development as methodology for the software architecture based on the description as a software metaprocess that characterizes the research process. We make UML’s diagrams (Unified Modeling Language to provide a visual modeling that describes the research methodology in order to identify the actors, elements and interactions in the research process.

Engine Tune-Up Service. Unit 3: Primary Circuit. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Bacon, E. Miles

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 3, Primary Circuit, available separately as CE 031 211. Focus of the exercises and pretests is testing the primary ignition circuit. Pretests and performance checklists are provided for each of the eight performance objectives…

Engine Tune-up Service. Unit 2: Charging System. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Richardson, Roger L.; Bacon, E. Miles

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 2, Charging System, available separately as CE 031 208. Focus of the exercises and pretests is testing the charging system. Pretests and performance checklists are provided for each of the three performance objectives contained in…

The Improvement of Kansei Engineering by Using the Repertory Grid Technique

Directory of Open Access Journals (Sweden)

Steinberg Falk

2015-09-01

Full Text Available A customer-oriented approach to product development with particular consideration of emotions is represented by Kansei Engineering. Developed by Mitsuo Nagamachi, Kansei Engineering is characterized by the possibility to capture customer perceptions and to translate them into product features. In order to assess these perceptions, a semantic space is generated. For this purpose it is necessary to identify Kansei words that are gathered up through research in marketing concepts, scientific journals and service reports. This procedure though displays the disadvantage of not being able to identify all emotions referring to the investigated product.

Evaluating the Performance Diagnostic Checklist-Human Services to Assess Incorrect Error-Correction Procedures by Preschool Paraprofessionals

Science.gov (United States)

Bowe, Melissa; Sellers, Tyra P.

2018-01-01

The Performance Diagnostic Checklist-Human Services (PDC-HS) has been used to assess variables contributing to undesirable staff performance. In this study, three preschool teachers completed the PDC-HS to identify the factors contributing to four paraprofessionals' inaccurate implementation of error-correction procedures during discrete trial…

77 FR 72237 - Policies To Promote Rural Radio Service and To Streamline Allotment and Assignment Procedures

Science.gov (United States)

2012-12-05

...) (section 307(b)) for new AM construction permits, as well as new FM allotments, in already well- served... petitioners argued that the new procedures ``ignore current marketplace realities,'' causing radio stations to..., whether ``potential services,'' such as vacant FM allotments or granted but unbuilt construction permits...

SNF project engineering process improvement plan

International Nuclear Information System (INIS)

KELMENSON, R.L.

1999-01-01

This Engineering Process Improvement Plan documents the activities and plans to be taken by the SNF Project (the Project) to support its engineering process and to produce a consolidated set of engineering procedures that are fully compliant with the requirements of HNF-PRO-1819 (1819). These requirements are imposed on all engineering activities performed for the Project and apply to all life-cycle stages of the Project's systems, structures and components (SSCs). This Plan describes the steps that will be taken by the Project during the transition period to ensure that new procedures are effectively integrated into the Project's work process as these procedures are issued. The consolidated procedures will be issued and implemented by September 30, 1999

Engine Tune-Up Service. Unit 1: Battery and Cranking System. Posttests. Automotive Mechanics Curriculum.

Science.gov (United States)

Goodson-Roberts, Ludy; And Others

This book of posttests is designed to accompany the Engine Tune-Up Service Student Guide for Unit 1, Battery and Cranking System. Focus of the posttests is the testing of the battery and cranking system. Four multiple choice posttests are provided, one for each of the performance objectives contained in the unit. (No answer keys are provided.)…

Site systems engineering: Systems engineering management plan

Energy Technology Data Exchange (ETDEWEB)

Grygiel, M.L. [Westinghouse Hanford Co., Richland, WA (United States)

1996-05-03

The Site Systems Engineering Management Plan (SEMP) is the Westinghouse Hanford Company (WHC) implementation document for the Hanford Site Systems Engineering Policy, (RLPD 430.1) and Systems Engineering Criteria Document and Implementing Directive, (RLID 430.1). These documents define the US Department of Energy (DOE), Richland Operations Office (RL) processes and products to be used at Hanford to implement the systems engineering process at the site level. This SEMP describes the products being provided by the site systems engineering activity in fiscal year (FY) 1996 and the associated schedule. It also includes the procedural approach being taken by the site level systems engineering activity in the development of these products and the intended uses for the products in the integrated planning process in response to the DOE policy and implementing directives. The scope of the systems engineering process is to define a set of activities and products to be used at the site level during FY 1996 or until the successful Project Hanford Management Contractor (PHMC) is onsite as a result of contract award from Request For Proposal DE-RP06-96RL13200. Following installation of the new contractor, a long-term set of systems engineering procedures and products will be defined for management of the Hanford Project. The extent to which each project applies the systems engineering process and the specific tools used are determined by the project`s management.

Design of the measurements validation procedure and the expert system architecture for a cogeneration internal combustion engine

International Nuclear Information System (INIS)

Barelli, L.; Bidini, G.

2005-01-01

A research activity has been initiated to study the development of a diagnostic methodology, for the optimization of energy efficiency and the maximization of the operational time in those conditions, based on artificial intelligence (AI) techniques such as artificial neural network (ANN) and fuzzy logic. The diagnostic procedure, developed specifically for the cogeneration plant located at the Engineering Department of the University of Perugia, must be characterized by a modular architecture to obtain a flexible architecture applicable to different systems. The first part of the study deals with the identifying the principal modules and the corresponding variables necessary to evaluate the module 'health state'. Also the consequent upgrade of the monitoring system is described in this paper. Moreover it describes the structure proposed for the diagnostic procedure, consisting of a procedure for measurement validation and a fuzzy logic-based inference system. The first reveals the presence of abnormal conditions and localizes their source distinguishing between system failure and instrumentation malfunctions. The second provides an evaluation of module health state and the classification of the failures which have possibly occurred. The procedure was implemented in C++

32 CFR Appendix A to Part 57 - Procedures for the Provision of Early Intervention Services for Infants and Toddlers With...

Science.gov (United States)

2010-07-01

... developmental areas: (i) Cognitive development. (ii) Physical development, including vision and hearing. (iii... Intervention Services for Infants and Toddlers With Disabilities and Their Families A Appendix A to Part 57... Appendix A to Part 57—Procedures for the Provision of Early Intervention Services for Infants and Toddlers...

Compliance with focused antenatal care services: do health workers in rural Burkina Faso, Uganda and Tanzania perform all ANC procedures?

Science.gov (United States)

Conrad, Paul; Schmid, Gerhrd; Tientrebeogo, Justin; Moses, Arinaitwe; Kirenga, Silvia; Neuhann, Florian; Müller, Olaf; Sarker, Malabika

2012-03-01

To assess health workers' compliance with the procedures set in the focused antenatal care (ANC) guidelines in rural Uganda, Tanzania and Burkina Faso; to compare the compliance within and among the three study sites; and to appraise the logistic and supply of the respective health facilities (HF). The cross-sectional study was conducted in the rural HF in three African countries. This descriptive observational study took place in HF in Nouna, Burkina Faso (5), Iganga, Uganda (6) and Rufiji, Tanzania (7). In total, 788 ANC sessions and service provisions were observed, the duration of each ANC service provision was calculated, and the infrastructures of the respective HF were assessed. Health workers in all HF performed most of the procedures but also omitted certain practices stipulated in the focused ANC guidelines. There was a substantial variation in provision of ANC services among HF within and among the country sites. The findings also revealed that the duration of first visits was ANC guidelines were often out of stock in most facilities. Health workers in all three country sites failed to perform all procedures stipulated in the focused ANC guideline; this could not be always explained by the lack of supplies. It is crucial to point out the necessity of the core procedures of ANC repeatedly. © 2011 Blackwell Publishing Ltd.

Balkanized research in ecological engineering revealed by a bibliometric analysis of earthworms and ecosystem services.

Science.gov (United States)

Blouin, Manuel; Sery, Nicolas; Cluzeau, Daniel; Brun, Jean-Jacques; Bédécarrats, Alain

2013-08-01

Energy crisis, climate changes, and biodiversity losses have reinforced the drive for more ecologically-based approaches for environmental management. Such approaches are characterized by the use of organisms rather than energy-consuming technologies. Although earthworms are believed to be potentially useful organisms for managing ecosystem services, there is actually no quantification of such a trend in literature. This bibliometric analysis aimed to measure the evolution of the association of "earthworms" and other terms such as ecosystem services (primary production, nutrient cycling, carbon sequestration, soil structure, and pollution remediation), "ecological engineering" or "biodiversity," to assess their convergence or divergence through time. In this aim, we calculated the similarity index, an indicator of the paradigmatic proximity defined in applied epistemology, for each year between 1900 and 2009. We documented the scientific fields and the geographical origins of the studies, as well as the land uses, and compare these characteristics with a 25 years old review on earthworm management. The association of earthworm related keywords with ecosystem services related keywords was increasing with time, reflecting the growing interest in earthworm use in biodiversity and ecosystem services management. Conversely, no significant increase in the association between earthworms and disciplines such as ecological engineering or restoration ecology was observed. This demonstrated that general ecologically-based approaches have yet to emerge and that there is little exchange of knowledge, methods or concepts among balkanized application realms. Nevertheless, there is a strong need for crossing the frontiers between fields of application and for developing an umbrella discipline to provide a framework for the use of organisms to manage ecosystem services.

Collaborative Science Using Web Services and the SciFlo Grid Dataflow Engine

Science.gov (United States)

Wilson, B. D.; Manipon, G.; Xing, Z.; Yunck, T.

2006-12-01

The General Earth Science Investigation Suite (GENESIS) project is a NASA-sponsored partnership between the Jet Propulsion Laboratory, academia, and NASA data centers to develop a new suite of Web Services tools to facilitate multi-sensor investigations in Earth System Science. The goal of GENESIS is to enable large-scale, multi-instrument atmospheric science using combined datasets from the AIRS, MODIS, MISR, and GPS sensors. Investigations include cross-comparison of spaceborne climate sensors, cloud spectral analysis, study of upper troposphere-stratosphere water transport, study of the aerosol indirect cloud effect, and global climate model validation. The challenges are to bring together very large datasets, reformat and understand the individual instrument retrievals, co-register or re-grid the retrieved physical parameters, perform computationally-intensive data fusion and data mining operations, and accumulate complex statistics over months to years of data. To meet these challenges, we have developed a Grid computing and dataflow framework, named SciFlo, in which we are deploying a set of versatile and reusable operators for data access, subsetting, registration, mining, fusion, compression, and advanced statistical analysis. SciFlo leverages remote Web Services, called via Simple Object Access Protocol (SOAP) or REST (one-line) URLs, and the Grid Computing standards (WS-* &Globus Alliance toolkits), and enables scientists to do multi-instrument Earth Science by assembling reusable Web Services and native executables into a distributed computing flow (tree of operators). The SciFlo client &server engines optimize the execution of such distributed data flows and allow the user to transparently find and use datasets and operators without worrying about the actual location of the Grid resources. In particular, SciFlo exploits the wealth of datasets accessible by OpenGIS Consortium (OGC) Web Mapping Servers & Web Coverage Servers (WMS/WCS), and by Open Data

Clinical Engineering: Experiences of assisted professional practices

International Nuclear Information System (INIS)

Langone, Luis; Vanetta, Marcos; Vazquez, Marcelo; Rotger, Viviana I; Olivera, Juan Manuel

2007-01-01

In the curricula of the Biomedical Engineering career of the Facultad de Ciencias Exactas y TecnologIa of the Universidad Nacional de Tucuman, Argenitna, there are the Assisted Professional Practices. Within this framework, the students have the possibility of performing practices in the clinic Sanatorio 9 de Julio. One of the objectives of these practices is to apply the concepts, methods and procedures studied along the career in the field work under real work conditions. From the point of view of the host institution, the objective is to improve the performance of the different services and areas applying the tools of Biomedical Engineering. The present work shows an example of such practices where an equipment preliminary analysis was made, its use and maintenance corresponding to the surgical unit of the clinic

Vibration aging of diesel-engine mounted electrical equipment

International Nuclear Information System (INIS)

Lee, B.J.; Morton, W.C.

1994-01-01

The Emergency Diesel Generator (EDG) in a Nuclear Power Plant is considered to be a component which is essential to safe plant operation. Failures of auxiliary equipment directly mounted on the EDG creates costly repairs, and compromises the engine's availability and reliability. Although IEEE-323 requires addressing of safety-related components due to mechanically induced vibration, very few guidelines exist in the nuclear industry to show how this may be accounted for. Most engine vendors rely on the empirical experience data as the basis of their evaluation for vibration. Upgrade of engine controls, addition of monitoring devices and other engine modifications require design and installation of new equipment to be mounted directly on the engine. This necessitates the evaluation for engine-induced vibration which is considered to be one of the most severe design parameters. This paper discusses the engine vibration characteristics, and the acquisition of extensive field vibration data on the diesel engine under operating conditions. The data is then used to develop life cycle vibration qualification test profiles that can be applied with confidence in a laboratory environment to qualify engine-mounted equipment. The intent is to validate a product's ability to survive under worst case, extended service on-engine conditions. This paper describes the procedures and approaches used to achieve those goals, and provides developed profile examples and test results

Activities with regard to research and development of technics for SNR 300 reactor vessel in-service inspection procedures

International Nuclear Information System (INIS)

Hoeller, K.; Kirchner, G.; Menck, J.

1980-01-01

During the development of SNR 300 in-service inspection equipment, several branches were tested by experiment. In this report special steps for testing of manipulation systems and additional engineering equipment for control systems, such as coupling fluid circuit or camera cooling system are considered more in detail

SNF project engineering process improvement plan

International Nuclear Information System (INIS)

DESAI, S.P.

1999-01-01

This Engineering Process Improvement Plan documents the activities and plans to be taken by the SNF Project to support its engineering process and to produce a consolidated set of engineering procedures that are fully compliant with the requirements of HNF-PRO-1819. All new procedures will be issued and implemented by September 30, 1999

40 CFR 91.607 - Test procedures.

Science.gov (United States)

2010-07-01

... weekends or holidays. (iii) If the manufacturer's service or target is less than the minimum rate specified... target. (3) Service accumulation must be completed on a sufficient number of test engines during... nonroad engine sales for the United States market for the applicable year of 7,500 or greater must...

In-service inspection of nuclear power-plant pressure components

International Nuclear Information System (INIS)

Lautzenheiser, C.E.

1976-01-01

The early light-water-reactor systems for production of commercial power were designed and fabricated in accordance with the codes then being used for fossil-fired power-generating stations with some design changes for increased inspectability during fabrication. Over the past few years, major strides have been made in in-service inspection technology. Work has been under way to determine the reliability of nondestructive testing methods and to develop formal inspection programs throughout the world. The major problems associated with in-service inspection are the scarcity of qualified personnel, the variability in procedures and data recording between inspection agencies, and exposure of inspection personnel to radiation. Further work will be required to more completely mechanize piping inspections to reduce radiation exposure and to standardize inspection procedures, equipment, and certification of personnel. Worldwide attention to the requirements of the American Society of Mechanical Engineers' Boiler and Pressure Vessel Code, the size and integrity of inspection agencies, and efforts such as the development of personnel qualification and certification guides emphasize the importance of in-service inspection to nuclear safety

Interim Service ISDN Satellite (ISIS) simulator development for advanced satellite designs and experiments

Science.gov (United States)

Pepin, Gerard R.

1992-01-01

The simulation development associated with the network models of both the Interim Service Integrated Services Digital Network (ISDN) Satellite (ISIS) and the Full Service ISDN Satellite (FSIS) architectures is documented. The ISIS Network Model design represents satellite systems like the Advanced Communications Technology Satellite (ACTS) orbiting switch. The FSIS architecture, the ultimate aim of this element of the Satellite Communications Applications Research (SCAR) Program, moves all control and switching functions on-board the next generation ISDN communications satellite. The technical and operational parameters for the advanced ISDN communications satellite design will be obtained from the simulation of ISIS and FSIS engineering software models for their major subsystems. Discrete event simulation experiments will be performed with these models using various traffic scenarios, design parameters, and operational procedures. The data from these simulations will be used to determine the engineering parameters for the advanced ISDN communications satellite.

Photovoltaic engineering handbook

Energy Technology Data Exchange (ETDEWEB)

Lasnier, F; Ang, T G [Asian Institute of Technolgoy, Bangkok (TH)

1990-01-01

The Photovoltaic Engineering Handbook is a comprehensive 'nuts and bolts' guide to photovoltaic technology and systems engineering aimed at engineers and designers in the field. It is the first book to look closely at the practical problems involved in evaluating and setting up a PV power system. The authors' comprehensive insight into the different procedures and decisions that a designer needs to make. The book is unique in its coverage and the technical information is presented in a concise and simple way to enable engineers from a wide range of backgrounds to initiate, assess, analyse and design a PV system. Energy planners making decisions on the most appropriate system for specific needs will also benefit from reading this book. Topics covered include technological processes, including solar cell technology, the photovoltaic generator, photovoltaic systems engineering; characterization and testing methods, sizing procedure; economic analysis and instrumentation. (author).

The Application of Tissue Engineering Procedures to Repair the Larynx

Science.gov (United States)

Ringel, Robert L.; Kahane, Joel C.; Hillsamer, Peter J.; Lee, Annie S.; Badylak, Stephen F.

2006-01-01

The field of tissue engineering/regenerative medicine combines the quantitative principles of engineering with the principles of the life sciences toward the goal of reconstituting structurally and functionally normal tissues and organs. There has been relatively little application of tissue engineering efforts toward the organs of speech, voice,…

Programming Google App Engine

CERN Document Server

Sanderson, Dan

2010-01-01

As one of today's cloud computing services, Google App Engine does more than provide access to a large system of servers. It also offers you a simple model for building applications that scale automatically to accommodate millions of users. With Programming Google App Engine, you'll get expert practical guidance that will help you make the best use of this powerful platform. Google engineer Dan Sanderson shows you how to design your applications for scalability, including ways to perform common development tasks using App Engine's APIs and scalable services. You'll learn about App Engine's a

Content Analysis of Vomit and Diarrhea Cleanup Procedures To Prevent Norovirus Infections in Retail and Food Service Operations.

Science.gov (United States)

Chao, Morgan G; Dubé, Anne-Julie; Leone, Cortney M; Moore, Christina M; Fraser, Angela M

2016-11-01

Human noroviruses are the leading cause of foodborne disease in the United States, sickening 19 to 21 million Americans each year. Vomit and diarrhea are both highly concentrated sources of norovirus particles. For this reason, establishing appropriate cleanup procedures for these two substances is critical. Food service establishments in states that have adopted the 2009 or 2013 U.S. Food and Drug Administration Food Code are required to have a program detailing specific cleanup procedures. The aim of our study was to determine the alignment of existing vomit and diarrhea cleanup procedures with the 11 elements recommended in Annex 3 of the 2011 Supplement to the 2009 Food Code and to determine their readability and clarity of presentation. In July 2015, we located vomit and diarrhea cleanup procedures by asking Norovirus Collaborative for Outreach, Research, and Education stakeholders for procedures used by their constituency groups and by conducting a Google Advanced Search of the World Wide Web. We performed content analysis to determine alignment with the recommendations in Annex 3. Readability and clarity of presentation were also assessed. A total of 38 artifacts were analyzed. The mean alignment score was 7.0 ± 1.7 of 11 points; the mean clarity score was 6.7 ± 2.5 of 17 points. Only nine artifacts were classified as high clarity, high alignment. Vomit and diarrhea cleanup procedures should align with Annex 3 in the Food Code and should, as well, be clearly presented; yet, none of the artifacts completely met both conditions. To reduce the spread of norovirus infections in food service establishments, editable guidelines are needed that are aligned with Annex 3 and are clearly written, into which authors could insert their facility-specific information.

Engineering hydro's future

International Nuclear Information System (INIS)

Anderson, J.L.

1992-01-01

In this challenging hydropower market, hydropower engineering services are in high demand. The number of new hydropower projects entering the pipeline may have slowed in recent years but that does not mean work is not being done. Independent developers, utilities and municipalities are carrying out a considerable amount of hydropower activity. Whatever the work involves - preliminary planning, licensing and relicensing, environmental mitigation, plant rehabilitation or new-plant startup - engineering firms are finding a brisk market for their services. The complexity of the regulatory framework makes hydropower facility and other water resource work more important then ever. Executives of three engineering firms - Acres International, Harza Engineering and Black and Veatch - active in these areas discuss their views on the future of the hydropower engineering market

SNF Project Engineering Process Improvement Plan

International Nuclear Information System (INIS)

DESAI, S.P.

2000-01-01

This plan documents the SNF Project activities and plans to support its engineering process. It describes five SNF Project Engineering initiatives: new engineering procedures, qualification cards process; configuration management, engineering self assessments, and integrated schedule for engineering activities

Hand-held electronic data collection and procedure environment

International Nuclear Information System (INIS)

Kennedy, E.; Doniz, K.

1996-01-01

As part of a CANDU Owners Group project, AECL has developed a hand-held electronic data collection and procedure environment. Integral to this environment is the C omputerized Procedure Engine . The development of the CPE allows operators, maintainers, and technical support staff to execute virtually any type of station procedure on a general-purpose PC-compatible hand-held computer. There are several advantages to using the computerized procedures: less paper use and handling, reduction in human error, reduction in rework in the field, an increase in procedural compliance, and immediate availability of data to download to databases and plant information systems. The paper describes: the advantages of using computerized procedures, why early forms of computerized procedures were inadequate, the features that the C omputerized Procedure Engine o ffers to the user, the streamlined life cycle of a computerized procedure, and field experience. The paper concludes that computerized procedures are ready for pilot applications at stations. (author)

The Impact of Ict on Business Models for Delivery Of ConsultancyServices - The Case Of Technical Engineering

DEFF Research Database (Denmark)

Falch, Morten; Nicolajsen, Hanne Westh

2009-01-01

This paper analyses the impact of the use of ICT in production and delivery of technical engineering consultancy services on business structures with regard to industry convergence and transaction costs. The paper takes an empirical study on the introduction of 3D-modelling tools in the building...... section in a Scandinavian engineering consultancy firm as its point of departure. The discussion identifies three different structural aspects, which all are affected by the use of ICT: Internationalisation vs. Local markets, Outsourcing vs. Structural integration, and Division of work between actors...

Engineering, Analysis and Technology FY 1995 Site Support Program Plan

International Nuclear Information System (INIS)

Suyama, R.M.

1994-09-01

The vision of the Engineering, Analysis and Technology organization is to be recognized as the cost-effective supplier of specialized, integrated, multi-disciplined engineering teams to support Hanford missions. The mission of the Engineering, Analysis and Technology organization is to provide centralized engineering services. These services are focused on supplying technical design, analytical engineering and related support services that support Hanford's environmental restoration mission. These services include engineering analysis, design and development of systems and engineered equipment, supplying multi-disciplined engineering teams to all Hanford programs and project organizations, engineering document release, and site-wide leadership in the development and implementation of engineering standards, engineering practices, and configuration management processes

Identifying the Gaps of Fourth Year Degree Pre-Service Teachers' Pedagogical Content Knowledge in Teaching Engineering Graphics and Design

Science.gov (United States)

Khoza, Samuel Dumazi

2017-01-01

Engineering Graphics and Design is a technological subject which is offered in the Bachelor of Education degree from third to fourth year of the degree course. Fourth year pre-service teachers find EGD difficult to teach because of various reasons. Therefore the aim of the paper was to investigate fourth year pre-service teachers' pedagogical…

Emotional engineering

CERN Document Server

In an age of increasing complexity, diversification and change, customers expect services that cater to their needs and to their tastes. Emotional Engineering vol 2. describes how their expectations can be satisfied and managed throughout the product life cycle, if producers focus their attention more on emotion. Emotional engineering provides the means to integrate products to create a new social framework and develops services beyond product realization to create of value across a full lifetime.  14 chapters cover a wide range of topics that can be applied to product, process and industry development, with special attention paid to the increasing importance of sensing in the age of extensive and frequent changes, including: • Multisensory stimulation and user experience  • Physiological measurement • Tactile sensation • Emotional quality management • Mental model • Kansei engineering.   Emotional Engineering vol 2 builds on Dr Fukuda’s previous book, Emotional Engineering, and provides read...

Is There Variation in Procedural Utilization for Lumbar Spine Disorders Between a Fee-for-Service and Salaried Healthcare System?

Science.gov (United States)

Schoenfeld, Andrew J; Makanji, Heeren; Jiang, Wei; Koehlmoos, Tracey; Bono, Christopher M; Haider, Adil H

2017-12-01

Whether compensation for professional services drives the use of those services is an important question that has not been answered in a robust manner. Specifically, there is a growing concern that spine care practitioners may preferentially choose more costly or invasive procedures in a fee-for-service system, irrespective of the underlying lumbar disorder being treated. (1) Were proportions of interbody fusions higher in the fee-for-service setting as opposed to the salaried Department of Defense setting? (2) Were the odds of interbody fusion increased in a fee-for-service setting after controlling for indications for surgery? Patients surgically treated for lumbar disc herniation, spinal stenosis, and spondylolisthesis (2006-2014) were identified. Patients were divided into two groups based on whether the surgery was performed in the fee-for-service setting (beneficiaries receive care at a civilian facility with expenses covered by TRICARE insurance) or at a Department of Defense facility (direct care). There were 28,344 patients in the entire study, 21,290 treated in fee-for-service and 7054 treated in Department of Defense facilities. Differences in the rates of fusion-based procedures, discectomy, and decompression between both healthcare settings were assessed using multinomial logistic regression to adjust for differences in case-mix and surgical indication. TRICARE beneficiaries treated for lumbar spinal disorders in the fee-for-service setting had higher odds of receiving interbody fusions (fee-for-service: 7267 of 21,290 [34%], direct care: 1539 of 7054 [22%], odds ratio [OR]: 1.25 [95% confidence interval 1.20-1.30], p fee-for-service setting irrespective of the underlying diagnosis. These results speak to the existence of provider inducement within the field of spine surgery. This reality portends poor performance for surgical practices and hospitals in Accountable Care Organizations and bundled payment programs in which provider inducement is allowed

Substantive and procedural contexts of engineering design

NARCIS (Netherlands)

Zwart, S.D.; Kroes, P.A.; Hyldgaard, C.; Newberry, B.; Meganck, M.; Didier, C.

2015-01-01

Kroes and Van de Poel (Problematizing the notion of social context of technology. In S. H. Christensen, B. Delahousse, & M. Meganck (Eds.), Engineering in context (pp. 61–74). Aarhus: Academica, 2009) maintain that distinguishing between technology and its social (intentional) context is impossible,

Framatome's ''SAF'' engineering simulator: a first step toward defining the engineer's simulation tool of the year 2000

International Nuclear Information System (INIS)

Constantieux, T.

1986-01-01

Among the techniques available to engineers today, computerized simulation is taking on an ever-growing importance. The ''SAF'' simulator, designed by Framatome for the use of its own engineers, has been in service since 1985. The SAF simulator provides continuous assistance to the engineer, from the preliminary design stage to the precise definition of operating procedures, including safety analysis and sizing computations. For the engineer of the year 2000, who will be used to dialoguing with the computer from a very young age, the SAF represents a first step toward a comprehensive simulation tool. Interactive and thus ''alive'', the SAF combines both extensive programming and data processing capabilities. Its simulation domain can still be considerably extended. Highly modular and equipped with easy-to-use compilers, the SAF can be readily modified and reconfigured by the user, to enable testing new models or new systems, in the complex and detailed environment of the nuclear unit being analysed. Employing the advanced computer programs used in project design, the SAF simulator is a particularly high-performance tool for simulating and analysing complex accident scenarios, including multiple equipment failures and possible operator errors, which may extend to complete draining of the reactor vessel and the release of radioactive fission products within the containment structure

Software Engineering Guidebook

Science.gov (United States)

Connell, John; Wenneson, Greg

1993-01-01

The Software Engineering Guidebook describes SEPG (Software Engineering Process Group) supported processes and techniques for engineering quality software in NASA environments. Three process models are supported: structured, object-oriented, and evolutionary rapid-prototyping. The guidebook covers software life-cycles, engineering, assurance, and configuration management. The guidebook is written for managers and engineers who manage, develop, enhance, and/or maintain software under the Computer Software Services Contract.

Field services experiences

International Nuclear Information System (INIS)

Colflesh, J.A.; Kruse, P.W.; Merluzzi, R.A.

1985-01-01

Combustion Engineering (C-E) is a large diversified manufacturer of products and services for the energy field. At this time, C-E has supplied the nuclear steam supply systems for eleven operating nuclear power plants with two additional units currently undergoing start-up testing. The focus of C-E's commitment in the nuclear power plant services area is the Nuclear Services organization within the Nuclear Power Systems Division. The Nuclear Services organization provides services on a timely cost efficient basis; and dedicates resources to developing new products and services which are truly responsive to the needs of operating power plants world wide. In the paper, C-E's capabilities and experience in the field of nuclear services are described. Highlighted are our capabilities in the areas of transition management services, operating services and engineering services

EMP protection procedure for electrical/electronic systems

International Nuclear Information System (INIS)

Latorre, V.R.

1976-01-01

This paper presents a procedure for the protection engineer to follow in assessing a system with respect to its susceptibility to an electromagnetic pulse (EMP), and in determining whether the system requires protection. If the system is determined to be vulnerable to EMP, the procedure also indicates how to decide upon the most suitable protection scheme. The discussion centers on two flow charts, which illustrate the step-by-step procedure which utilizes the necessary ingredients of EMP protection engineering discussed in a previous paper. The description of the protection procedure is divided into two parts: the first dealing with issues on the macroscopic or large-scale system level, while the second is concerned with operations on the subsystem level or lower

Engine Tune-Up Service. Unit 1: Battery and Cranking System. Review Exercise Book. Automotive Mechanics Curriculum.

Science.gov (United States)

Goodson-Roberts, Ludy; And Others

This book of pretests and review exercises is designed to accompany the Engine Tune-Up Service Student Guide for Unit 1, Battery and Cranking System. Focus of the exercises and pretests is testing the battery and cranking system. Pretests and performance checklists are provided for each of the four performance objectives contained in the unit.…

RTOD-photo operations and procedures manual

Energy Technology Data Exchange (ETDEWEB)

1966-03-15

This document presents a survey of the EG&G NRDS photographic operation in four major sections and includes the work scope, procedures, some technical backgrounding and operational information. Two sections, Instrumentation and Photo Systems, include the areas of direct responsibilities while a section on Film Handling and Coordination and a section covering special information, pertinent to the project, are included to adequately complete this survey. The photographic group is housed in two trailers within the control point area at NRDS and from these trailers provides photographic support at a number of locations. Four camera bunkers, three camera towers, a kinescope system, a microfilm system and remote camera controls comprise the facilities that the group maintains and operates outside these trailers. The work load includes major items such as: motion picture coverage of the nuclear rocket engine tests, data record microfilming, kinescope recording, and documentary coverage of the company related operational responsibilities. In addition, a number of minor photographic services are extended, when required. The nature of the work, because of its importance within the research and development efforts at NRDS, requires optimum quality and efficiency throughout. The many procedures outlined here have been designed to satisfy these requirements.

Paired peer learning through engineering education outreach

Science.gov (United States)

Fogg-Rogers, Laura; Lewis, Fay; Edmonds, Juliet

2017-01-01

Undergraduate education incorporating active learning and vicarious experience through education outreach presents a critical opportunity to influence future engineering teaching and practice capabilities. Engineering education outreach activities have been shown to have multiple benefits; increasing interest and engagement with science and engineering for school children, providing teachers with expert contributions to engineering subject knowledge, and developing professional generic skills for engineers such as communication and teamwork. This pilot intervention paired 10 pre-service teachers and 11 student engineers to enact engineering outreach in primary schools, reaching 269 children. A longitudinal mixed methods design was employed to measure change in attitudes and Education Outreach Self-Efficacy in student engineers; alongside attitudes, Teaching Engineering Self-Efficacy and Engineering Subject Knowledge Confidence in pre-service teachers. Highly significant improvements were noted in the pre-service teachers' confidence and self-efficacy, while both the teachers and engineers qualitatively described benefits arising from the paired peer mentor model.

Supporting interoperability of collaborative networks through engineering of a service-based Mediation Information System (MISE 2.0)

Science.gov (United States)

Benaben, Frederick; Mu, Wenxin; Boissel-Dallier, Nicolas; Barthe-Delanoe, Anne-Marie; Zribi, Sarah; Pingaud, Herve

2015-08-01

The Mediation Information System Engineering project is currently finishing its second iteration (MISE 2.0). The main objective of this scientific project is to provide any emerging collaborative situation with methods and tools to deploy a Mediation Information System (MIS). MISE 2.0 aims at defining and designing a service-based platform, dedicated to initiating and supporting the interoperability of collaborative situations among potential partners. This MISE 2.0 platform implements a model-driven engineering approach to the design of a service-oriented MIS dedicated to supporting the collaborative situation. This approach is structured in three layers, each providing their own key innovative points: (i) the gathering of individual and collaborative knowledge to provide appropriate collaborative business behaviour (key point: knowledge management, including semantics, exploitation and capitalisation), (ii) deployment of a mediation information system able to computerise the previously deduced collaborative processes (key point: the automatic generation of collaborative workflows, including connection with existing devices or services) (iii) the management of the agility of the obtained collaborative network of organisations (key point: supervision of collaborative situations and relevant exploitation of the gathered data). MISE covers business issues (through BPM), technical issues (through an SOA) and agility issues of collaborative situations (through EDA).

The construction of life prediction models for the design of Stirling engine heater components

Science.gov (United States)

Petrovich, A.; Bright, A.; Cronin, M.; Arnold, S.

1983-01-01

The service life of Stirling-engine heater structures of Fe-based high-temperature alloys is predicted using a numerical model based on a linear-damage approach and published test data (engine test data for a Co-based alloy and tensile-test results for both the Co-based and the Fe-based alloys). The operating principle of the automotive Stirling engine is reviewed; the economic and technical factors affecting the choice of heater material are surveyed; the test results are summarized in tables and graphs; the engine environment and automotive duty cycle are characterized; and the modeling procedure is explained. It is found that the statistical scatter of the fatigue properties of the heater components needs to be reduced (by decreasing the porosity of the cast material or employing wrought material in fatigue-prone locations) before the accuracy of life predictions can be improved.

Statement of work for architect-engineer services, initial pretreatment module

International Nuclear Information System (INIS)

Sowa, K.B.

1994-01-01

This Statement of Work describes the Architect-Engineer services to be provided by Raytheon/BNFL in providing a conceptual design (Contract TGW-SVV-063869) for the Initial Pretreatment Module (IPM), Project W-236B, at the Hanford site, Richland, Washington. The IPM Project, a radiochemical process facility, will be designed and constructed for an initial phase of waste pretreatment, which will be for the removal of cesium from supernatant wastes to produce a Low-level waste (LLW) stream to a vitrification facility. The design shall also accommodate side streams of High-Level Waste (HLW) fractions that will be directed to suitable, existing storage tanks where they will be recombined with an additional high-activity waste fraction generated from pretreatment of the tank waste sludges and solids. This combined high-activity waste fraction will be immobilized as glass and disposed in a geological repository

ANALYSIS OF EFFECTIVENESS OF METHODOLOGICAL SYSTEM FOR PROBABILITY AND STOCHASTIC PROCESSES COMPUTER-BASED LEARNING FOR PRE-SERVICE ENGINEERS

Directory of Open Access Journals (Sweden)

E. Chumak

2015-04-01

Full Text Available The author substantiates that only methodological training systems of mathematical disciplines with implementation of information and communication technologies (ICT can meet the requirements of modern educational paradigm and make possible to increase the educational efficiency. Due to this fact, the necessity of developing the methodology of theory of probability and stochastic processes computer-based learning for pre-service engineers is underlined in the paper. The results of the experimental study for analysis of the efficiency of methodological system of theory of probability and stochastic processes computer-based learning for pre-service engineers are shown. The analysis includes three main stages: ascertaining, searching and forming. The key criteria of the efficiency of designed methodological system are the level of probabilistic and stochastic skills of students and their learning motivation. The effect of implementing the methodological system of probability theory and stochastic processes computer-based learning on the level of students’ IT literacy is shown in the paper. The expanding of the range of objectives of ICT applying by students is described by author. The level of formation of students’ learning motivation on the ascertaining and forming stages of the experiment is analyzed. The level of intrinsic learning motivation for pre-service engineers is defined on these stages of the experiment. For this purpose, the methodology of testing the students’ learning motivation in the chosen specialty is presented in the paper. The increasing of intrinsic learning motivation of the experimental group students (E group against the control group students (C group is demonstrated.

Power reactor services provided by the Penn State Radiation Science and Engineering Center

International Nuclear Information System (INIS)

Voth, M.H.; Jester, W.A.

1993-01-01

The power reactor industry emerged from extensive research and development performed at nonpower reactors (NPRs). As the industry matures, NPRs continue to support and enhance power reactor technology. With the closure of many government and private industry NPRS, there is an increasing call for the 33 universities with operating research reactors to provide the needed services. The Penn State Radiation Science and Engineering Center (RSEC) includes a 1-MW pool-type pulsing TRIGA reactor, a neutron beam laboratory with real-time neutron radiography equipment, hot cells with master-slave manipulators for remote handling of radioactive materials, a gamma-ray irradiation pool, a low-level radiation monitoring laboratory, and extensive equipment for radiation monitoring, dosimetry, and material properties determination. While equipment is heavily utilized in the instructional and academic research programs, significant time remains available for service work. Cost recovery for service work generates income for personnel, equipment maintenance, and facility improvements. With decreasing federal and state funding for educational programs, it is increasingly important that facilities be fully utilized to generate supplementary revenue. The following are examples of such work performed at the RSEC

Service engineers in change: count your words : A case study into professional discourse and culture within three Dutch organizations

NARCIS (Netherlands)

Drs Jos Pieterse

2014-01-01

This doctoral thesis describes three case studies of service engineers participating in organizational change, interacting with managers and consultants. The study investigates the role of differences in professional discourse and culture when these three professional groups interact in

Design, Implementation and Analysis of Learner-Centered Guided In-Service Programme for Technical Teacher Education

Directory of Open Access Journals (Sweden)

Tiia Rüütmann

2014-03-01

Full Text Available The design of learner-centered guided in-service program for technical teacher education has been launched at Estonian Centre for Engineering Pedagogy at Tallinn University of Technology. The aim of the program has been facilitating the initial in-service teaching experience, involving mentoring, peer support and cognitive apprenticeship. The emphasis has been on teaching for knowledge application, including the choice of content and processes, motivation, reflection, problem-solving, choice of educational technology, effective teaching methods, teaching models and strategies ཿ concepts, tools and procedures of the field of engineering, organized in ways enabling teachers to formulate real world problems, apply and solve them. The program has been implemented since 2012 and covers IGIP curriculum requirements. In the present article the designed program is described and analyzed.

Development of in-service inspection system for core support graphite structures in the high temperature engineering test reactor (HTTR)

Energy Technology Data Exchange (ETDEWEB)

Sumita, Junya; Hanawa, Satoshi; Kikuchi, Takayuki; Ishihara, Masahiro [Japan Atomic Energy Research Inst., Oarai, Ibaraki (Japan). Oarai Research Establishment

2003-03-01

Visual inspection of core support graphite structures using TV camera as in-service inspection and measurement of material characteristics using surveillance test specimens are planned in the High Temperature Engineering Test Reactor (HTTR) to confirm structural integrity of the core support graphite structures. For the visual inspection, in-service inspection system developed from September 1996 to June 1998, and pre-service inspection using the system was carried out. As the result of the pre-service inspection, it was validated that high quality of visual inspection with TV camera can be carried out, and also structural integrity of the core support graphite structures at the initial stage of the HTTR operation was confirmed. (author)

Transfer and Reuse of Knowledge from the Service Phase of Complex Products

DEFF Research Database (Denmark)

Vianello, Giovanna

industry. Knowledge generated during the service phase was analysed from the point of view of service engineers and engineering designers. Furthermore, the mechanisms involved in the transfer of knowledge within the service phase and between service and design were investigated. Both service engineers....... The study showed that knowledge transfer between the service and design departments was not systematic and consisted primarily of knowledge pushed by service engineers to engineering designers. The issues that posed a barrier to a systematic reuse of service knowledge were taken into consideration whilst...... and engineering designers were interested in knowledge about changes, issues and improvements generated during service; however, engineering designers were more orientated towards knowledge of the equipment at a component level while service engineers were interested in obtaining an overview of the systems...

40 CFR 1065.130 - Engine exhaust.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Engine exhaust. 1065.130 Section 1065... ENGINE-TESTING PROCEDURES Equipment Specifications § 1065.130 Engine exhaust. (a) General. Use the exhaust system installed with the engine or one that represents a typical in-use configuration. This...

40 CFR 89.508 - Test procedures.

Science.gov (United States)

2010-07-01

... rate does not apply on weekends or holidays. (iii) If the manufacturer's service or target is less than... the manufacturer's service target. (3) Service accumulation must be completed on a sufficient number... the Administrator. (1) A manufacturer with projected nonroad engine sales for the United States market...

39 CFR 7.4 - Procedure for closing a meeting.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Procedure for closing a meeting. 7.4 Section 7.4 Postal Service UNITED STATES POSTAL SERVICE THE BOARD OF GOVERNORS OF THE U.S. POSTAL SERVICE PUBLIC OBSERVATION (ARTICLE VII) § 7.4 Procedure for closing a meeting. (a) A majority of the entire membership of...

Usability Evaluation Methods for Special Interest Internet Information Services

Directory of Open Access Journals (Sweden)

Eva-Maria Schön

2014-06-01

Full Text Available The internet provides a wide range of scientific information for different areas of research, used by the related scientific communities. Often the design or architecture of these web pages does not correspond to the mental model of their users. As a result the wanted information is difficult to find. Methods established by Usability Engineering and User Experience can help to increase the appeal of scientific internet information services by analyzing the users’ requirements. This paper describes a procedure to analyze and optimize scientific internet information services that can be accomplished with relatively low effort. It consists of a combination of methods that already have been successfully applied to practice: Personas, usability inspections, Online Questionnaire, Kano model and Web Analytics.

Terminal Procedures Publication/Airport Diagrams - Aeronautical Information Services Digital Products

Data.gov (United States)

Department of Transportation — The U.S. Terminal Procedure Publications (TPPs) is a 26 volume set of printed paper books containing Instrument Approach Procedure charts (IAP), Departure Procedure...

Managing online service recovery : procedures, justice and customer satisfaction

OpenAIRE

Singh, Jaywant; Crisafulli, Benedetta

2016-01-01

Purpose The Internet has changed the way services are delivered and has created new forms of customer-firm interactions. Whilst online service failures remain inevitable, the Internet offers opportunities for delivering efficient service recovery through the online channel. Notwithstanding, research evidence on how firms can deliver online service recovery remains scarce. This study investigates the impact of two online service recovery strategies - online information and te...

Painting with polygons: a procedural watercolor engine.

Science.gov (United States)

DiVerdi, Stephen; Krishnaswamy, Aravind; Měch, Radomír; Ito, Daichi

2013-05-01

Existing natural media painting simulations have produced high-quality results, but have required powerful compute hardware and have been limited to screen resolutions. Digital artists would like to be able to use watercolor-like painting tools, but at print resolutions and on lower end hardware such as laptops or even slates. We present a procedural algorithm for generating watercolor-like dynamic paint behaviors in a lightweight manner. Our goal is not to exactly duplicate watercolor painting, but to create a range of dynamic behaviors that allow users to achieve a similar style of process and result, while at the same time having a unique character of its own. Our stroke representation is vector based, allowing for rendering at arbitrary resolutions, and our procedural pigment advection algorithm is fast enough to support painting on slate devices. We demonstrate our technique in a commercially available slate application used by professional artists. Finally, we present a detailed analysis of the different vector-rendering technologies available.

A model for reusing service knowledge based on an empirical case

DEFF Research Database (Denmark)

Ahmed-Kristensen, Saeema; Vianello, Giovanna

2015-01-01

between the service and design phases. Interviews with engineering designers and service engineers were conducted. Knowledge arising from servicing the drilling equipment that was identified as relevant for service engineers was compared to that relevant for engineering designers. Furthermore......, the mechanisms involved in the transfer of knowledge between service and design were investigated. Knowledge about changes, issues and improvements generated during service was found to be relevant to both groups; however, engineering designers were interested in knowledge of equipment at a component level...

Applying Modeling Tools to Ground System Procedures

Science.gov (United States)

Di Pasquale, Peter

2012-01-01

As part of a long-term effort to revitalize the Ground Systems (GS) Engineering Section practices, Systems Modeling Language (SysML) and Business Process Model and Notation (BPMN) have been used to model existing GS products and the procedures GS engineers use to produce them.

A procedure for building product models

DEFF Research Database (Denmark)

Hvam, Lars; Riis, Jesper; Malis, Martin

2001-01-01

This article presents a procedure for building product models to support the specification processes dealing with sales, design of product variants and production preparation. The procedure includes, as the first phase, an analysis and redesign of the business processes, which are to be supported...... with product models. The next phase includes an analysis of the product assortment, and the set up of a so-called product master. Finally the product model is designed and implemented using object oriented modelling. The procedure is developed in order to ensure that the product models constructed are fit...... for the business processes they support, and properly structured and documented, in order to facilitate that the systems can be maintained continually and further developed. The research has been carried out at the Centre for Industrialisation of Engineering, Department of Manufacturing Engineering, Technical...

Software Service Engineering : Tenets and Challenges

NARCIS (Netherlands)

Heuvel, Willem-Jan van den; Zimmermann, Olaf; Leymann, Frank; Lago, Patricia; Schieferdecker, Ina; Zdun, Uwe; Avgeriou, Paris

2009-01-01

Service-Oriented Architecture (SOA) constitutes a modern, standards-based and technology-independent paradigm and architectural style for distributed enterprise computing. The SOA style promotes the publishing, discovery, and binding of loosely-coupled, network-accessible software services. With SOA

THE COMPUTER SYSTEM PROVIDES A SIMPLER QUALITY SERVICES IN THE CUSTOMS PROCEDURE

Directory of Open Access Journals (Sweden)

Stanka Preskar

2013-10-01

Full Text Available With Slovenia joining the EU the need for higher quality and faster transit transport of goods through customs procedures has increased. This paper presents the recent logistics approach, which allows a better link between transportation and freight forwarding. Modern computer programs used by forwarding companies have contributed to this. Forwarder companies may have a role of organizer or a place using the transport services of customs clearance of goods at the entry / exit to / from the European Union. Each type of transport has a role to play, but gets even stronger when combined under one category. This is a multimodal transport. As an example we use logistic work in a logistic company. Here the work is divided in to transit of goods, customs clearance of goods, but also touching the law and the ranking of goods by tariff codes.

32 CFR Appendix A to Part 80 - Procedures for the Provision of Early Intervention Services for Infants and Toddlers With...

Science.gov (United States)

2010-07-01

... toddler's present levels of physical development, cognitive development, communication development, social... the development of the infant or toddler with a disability. b. A mechanism to develop, for each infant... development of procedures to ensure that services are provided to infants and toddlers with disabilities and...

The 1991 Department of the Army Service Response Force exercise: Procedural Guide SRFX-91

Energy Technology Data Exchange (ETDEWEB)

Madore, M.A.; Thomson, R.S.; Haffenden, R.A.; Baldwin, T.E.; Meleski, S.A.

1991-09-01

This procedural guide was written to assist the US Army in planning for a chemical emergency exercise at Tooele Army Depot in Utah. The roles of various members of the emergency response community are described for various accident scenarios, and the relationships between the various responders are identified. For the June 1991 exercise at Tooele, the emergency response community includes the command structure at Tooele Army Depot; the US Army Service Response Force and other Department of Defense agencies; emergency response personnel from Tooele, Salt Lake, and Utah counties and municipal governments; the Utah Comprehensive Emergency Management Agency and other state agencies; and various federal agencies.

Electromechanical Engineering Technology Curriculum.

Science.gov (United States)

Georgia State Univ., Atlanta. Dept. of Vocational and Career Development.

This guide offers information and procedures necessary to train electromechanical engineering technicians. Discussed first are the rationale and objectives of the curriculum. The occupational field of electromechanical engineering technology is described. Next, a curriculum model is set forth that contains information on the standard…

Disciplinary Literacy in Engineering

Science.gov (United States)

Wilson-Lopez, Amy; Minichiello, Angela

2017-01-01

People who practice engineering can make a difference through designing products, procedures, and systems that improve people's quality of life. Literacy, including the interpretation, evaluation, critique, and production of texts and representations, is important throughout the engineering design process. In this commentary, the authors outline…

"The Invisible Staff": A Qualitative Analysis of Environmental Service Workers' Perceptions of the VA Clostridium difficile Prevention Bundle Using a Human Factors Engineering Approach.

Science.gov (United States)

Yanke, Eric; Moriarty, Helene; Carayon, Pascale; Safdar, Nasia

2018-06-11

Using a novel human factors engineering approach, the Systems Engineering Initiative for Patient Safety model, we evaluated environmental service workers' (ESWs) perceptions of barriers and facilitators influencing adherence to the nationally mandated Department of Veterans Affairs Clostridium difficile infection (CDI) prevention bundle. A focus group of ESWs was conducted. Qualitative analysis was performed employing a visual matrix display to identify barrier/facilitator themes related to Department of Veterans Affairs CDI bundle adherence using the Systems Engineering Initiative for Patient Safety work system as a framework. Environmental service workers reported adequate cleaning supplies/equipment and displayed excellent knowledge of CDI hand hygiene requirements. Environmental service workers described current supervisory practices as providing an acceptable amount of time to clean CDI rooms, although other healthcare workers often pressured ESWs to clean rooms more quickly. Environmental service workers reported significant concern for CDI patients' family members as well as suggesting uncertainty regarding the need for family members to follow infection prevention practices. Small and cluttered patient rooms made cleaning tasks more difficult, and ESW cleaning tasks were often interrupted by other healthcare workers. Environmental service workers did not feel comfortable asking physicians for more time to finish cleaning a room nor did ESWs feel comfortable pointing out lapses in physician hand hygiene. Multiple work system components serve as barriers to and facilitators of ESW adherence to the nationally mandated Department of Veterans Affairs CDI bundle. Environmental service workers may represent an underappreciated resource for hospital infection prevention, and further efforts should be made to engage ESWs as members of the health care team.

25 CFR 143.3 - Procedures.

Science.gov (United States)

2010-04-01

... AFFAIRS, DEPARTMENT OF THE INTERIOR FINANCIAL ACTIVITIES CHARGES FOR GOODS AND SERVICES PROVIDED TO NON-FEDERAL USERS § 143.3 Procedures. (a) All non-Federal users who receive the above listed goods/services... agreement shall contain the following statement: “Application for _____ (specify good(s)/service(s)) is...

40 CFR 90.508 - Test procedures.

Science.gov (United States)

2010-07-01

... service or target is less than the minimum rate specified (12 hours per day), then the minimum daily accumulation rate shall be equal to the manufacturer's service target. (3) Service accumulation shall be... nonroad engine sales for the United States market for the applicable year of 7,500 or greater shall...

Sound Search Engine Concept

DEFF Research Database (Denmark)

2006-01-01

Sound search is provided by the major search engines, however, indexing is text based, not sound based. We will establish a dedicated sound search services with based on sound feature indexing. The current demo shows the concept of the sound search engine. The first engine will be realased June...

Software life after in-service

International Nuclear Information System (INIS)

Tseng, M.; Eng, P.

1993-01-01

Software engineers and designers tend to conclude a software project at the in-service milestone of the software life cycle. But the reality is that the 'life after in-service' is significantly longer than other phases of the life cycle, typically 20 years or more depending on the maintainability of the hardware platform and the designed life of the plant. During this period, the software asset (as with other physical assets in the plant) continues to be upgraded to correct deficiencies, meet new requirements, cope with obsolescence of equipment and so on. The software life cycle ends with a migration of the software to a different platform. It is typical in a software development project to put a great deal of emphasis on design methodologies, techniques, tools, development environment, standard procedures, and project management to ensure quality product is delivered on schedule and within budget. More often than not, a disproportion of emphasis is placed on the issues and needs of the in-service phase. Once the software is in-service, the designers move on to other projects, while the maintenance and support staff must manage the software. This paper examines the issues in three steps. First it presents a view of software from maintenance and support staff perspectives, including complexity of software, suitability of documentation, configuration management, training, difficulties and risks associated with making changes, required skills and knowledge. Second, it identifies the concerns raised from these viewpoints, including costs of maintaining the software, ability to meet additional requirements, availability of support tools, length of time required to engineer and install changes, and a strategy for the migration of software asset. Finally it discusses some approaches to deal with the concerns. (Author) 5 refs., fig

Unexpected effects of computer presented procedures

International Nuclear Information System (INIS)

Blackman, H.S.; Nelson, W.R.

1988-01-01

Results from experiments conducted at the Idaho National Engineering Laboratory have been presented regarding the computer presentation of procedural information. The results come from the experimental evaluation of an expert system which presented procedural instructions to be performed by a nuclear power plant operator. Lessons learned and implications from the study are discussed as well as design issues that should be considered to avoid some of the pitfalls in computer presented or selected procedures

Selected Readings in Genetic Engineering

Science.gov (United States)

Mertens, Thomas R.; Robinson, Sandra K.

1973-01-01

Describes different sources of readings for understanding issues and concepts of genetic engineering. Broad categories of reading materials are: concerns about genetic engineering; its background; procedures; and social, ethical and legal issues. References are listed. (PS)

On the additive splitting procedures and their computer realization

DEFF Research Database (Denmark)

Farago, I.; Thomsen, Per Grove; Zlatev, Z.

2008-01-01

Two additive splitting procedures are defined and studied in this paper. It is shown that these splitting procedures have good stability properties. Some other splitting procedures, which are traditionally used in mathematical models used in many scientific and engineering fields, are sketched. All...

DECA -- The design change assistant: An application of expert systems concepts to procedure automation

International Nuclear Information System (INIS)

Brtis, J.S.

1993-01-01

Proceduralized engineering reviews required for nuclear power stations result in significant O ampersand M cost's. A method of streamlining procedural reviews (while improving their quality) is to computerize the procedures and associated checklists. DECA, the Design Change Assistant, is an expert system based program that is specifically designed for computerizing procedures. This program improves the effectiveness of engineers in performing engineering design reviews. DECA is a development shell, which allows the computerization of most types of engineering reviews. In addition to computerizing the decision making process, DECA makes it possible to call on electronic information, such as databases or text files, and makes them available to the user to assist in a review. DECA clearly demonstrates the benefits that can accrue by applying expert system technologies to engineering reviews. It results in the following: a well defined process, reduced user training in the use of procedures, improved quality of reviews, a streamlining of the review process through elimination of questions that are not applicable, and high quality documentation of reviews. DECA has been successfully applied to Commonwealth Edison's engineering design review checklists, and is currently in use by Commonwealth Edison

UNC Nuclear Industries' human-factored approach to the operating or maintenance procedure

International Nuclear Information System (INIS)

Nelson, A.A.; Clark, J.E.

1982-01-01

The development of Human Factors Engineering (HFE) and UNC Nuclear Industries' (UNC) commitment to minimizing the potential for human error in the performance of operating or maintenance procedures have lead to a procedure upgrade program. Human-factored procedures were developed using information from many sources including, but not limited to, operators, a human factors specialist, engineers and supervisors. This has resulted in the Job Performance Aid (JPA). This paper presents UNC's approach to providing human-factored operating and maintenance procedures

Evaluation procedure for Service Level C and D upper shelf toughness criteria for Linde 80 weld material

International Nuclear Information System (INIS)

Gamble, R.M.

1993-09-01

Procedures have been defined to evaluate the upper shelf toughness criteria recently defined by ASME Section XI Subgroup on Evaluation Standards for ASME Service Level C and D conditions. These procedures and the ASME criteria were applied to assess the upper toughness requirements for axial Linde 80 welds in a typical PWR reactor pressure vessel beltline geometry. Because there is a wide spectrum of possible Level C and D events, the evaluation was performed for a bounding thermal transient and results were obtained to determine allowable pressure versus upper shelf energy. The allowable pressure for the bounding thermal transient was found to be above normal operating pressure for upper shelf energies equal to and greater than 40 ft-lb. Because a bounding thermal transient was used, the allowable pressures determined in this work should be minimum values. The results from this work provide a screening criterion to quickly identify limiting transients that may require more detailed analysis and an analysis procedure to assess compliance with ASME upper shelf energy criteria for Service Level C and D events. For events with significant thermal transients, such as those evaluated in this work, the transient pressure typically decreases rapidly from normal operating pressure to 1,500 psi or less before the maximum thermal K I , is reached. Comparing this pressure range with the allowable pressure versus upper shelf energy curves determined in this work indicates that the transient pressures are significantly less than the allowables computed for Level C and D events; consequently, Level A/B conditions will likely dictate the upper shelf requirements for most applications

Risk Analysis in Civil Engineering

DEFF Research Database (Denmark)

Thoft-Christensen, Palle

Until fairly recently there has been a tendency for structural engineering to be dominated by deterministic thinking, characterised in design calculations by the use of specified minimum material properties, specified load intensities and by prescribed procedures for computing stresses and deflec......Until fairly recently there has been a tendency for structural engineering to be dominated by deterministic thinking, characterised in design calculations by the use of specified minimum material properties, specified load intensities and by prescribed procedures for computing stresses...

Central Laboratories Services

Data.gov (United States)

Federal Laboratory Consortium — The TVA Central Laboratories Services is a comprehensive technical support center, offering you a complete range of scientific, engineering, and technical services....

Diesel Technology: Engines. [Teacher and Student Editions.

Science.gov (United States)

Barbieri, Dave; Miller, Roger; Kellum, Mary

Competency-based teacher and student materials on diesel engines are provided for a diesel technology curriculum. Seventeen units of instruction cover the following topics: introduction to engine principles and procedures; engine systems and components; fuel systems; engine diagnosis and maintenance. The materials are based on the…

47 CFR 73.333 - Engineering charts.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Engineering charts. 73.333 Section 73.333 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES FM Broadcast Stations § 73.333 Engineering charts. This section consists of the following Figures 1, 1a, 2, and...

Research on Operating Procedure Development in View of RCM Theory

International Nuclear Information System (INIS)

Shi, J.

2015-01-01

The operation of NPPs (nuclear power plants) is closely related to SSCs (Structure, System and Component) function implementations and failure recoveries, and strictly follows operating procedure. The philosophy of RCM (Reliability Centered Maintenance) which is a widely-used systematic engineering approach in industry focusing on likewise facility functions and effectiveness of maintenance is accepted in relative analysis of NPPs operation in this paper. Based on the theory of RCM, the paper will discuss general logic of operating procedure development and framework optimization as well combining NPPs engineering design. Since the quality of operating procedures has a significant impact on the safe and reliable operation of NPPs, the paper provides a proposed operating procedure development logic diagramme for reference for the procedure optimization task ahead. (author)

Gap analysis methodology for business service engineering

NARCIS (Netherlands)

Nguyen, D.K.; van den Heuvel, W.J.A.M.; Papazoglou, M.; de Castro, V.; Marcos, E.; Hofreiter, B.; Werthner, H.

2009-01-01

Many of today’s service analysis and design techniques rely on ad-hoc and experience-based identification of value-creating business services and implicitly assume a “green-field” situation focusing on the development of completely new services while offering very limited support for discovering

Unexpected effects of computer presented procedures

International Nuclear Information System (INIS)

Blackman, H.S.; Nelson, W.R.

1988-01-01

Results from experiments conducted at the Idaho National Engineering Laboratory will be presented regarding the computer presentation of procedural information. The results come from the experimental evaluation of an expert system which presented procedural instructions to be performed by a nuclear power plant operator. Lessons learned and implications from the study will be discussed as well as design issues that should be considered to avoid some of the pitfalls in computer presented or selected procedures. 1 ref., 1 fig

Business service modeling for the service-oriented enterprise

NARCIS (Netherlands)

Jayasinghe Arachchig, J.; Weigand, H.; Jeusfeld, M.A.

2012-01-01

Service-oriented architectures are the upcoming business standard for realizing enterprise information systems, thus creating a need for analysis and design methods that are truly service-oriented. Most research on this topic so far takes a strict software engineering perspective. For a proper

Cummins Engine Company B5.9 Propane Engine Development, Certification, and Demonstration Project

Energy Technology Data Exchange (ETDEWEB)

The ADEPT Group, Inc. (Los Angeles, California)

1998-12-18

The objective of this project was to successfuly develop and certify an LPG-dedicated medium-duty original equipment manufacturer (OEM) engine that could be put into production. The engine was launched into production in 1994, and more than 800 B5.9G engines are now in service in the United States and abroad. This engine is now offered by more than 30 bus and truck OEMs.

Da "Search engines" a "Shop engines"

OpenAIRE

Lupi, Mauro

2001-01-01

The change occuring related to “search engines” is going towards e-commerce, transforming all the main search engines into information and commercial suggestion conveying means, basing their businnes on this activity. In a next future we will find two main series of search engines: from one side, the portals that will offer a general orientation guide being convoying means for services and to-buy products; from the other side, vertical portals able to offer information and products on specifi...

48 CFR 536.602 - Selection of firms for architect-engineer contracts.

Science.gov (United States)

2010-10-01

... architect-engineer contracts. 536.602 Section 536.602 Federal Acquisition Regulations System GENERAL SERVICES ADMINISTRATION SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 536.602 Selection of firms for architect-engineer contracts. ...

Automotive engineering partners

Energy Technology Data Exchange (ETDEWEB)

Liebl, Johannes; Siebenpfeiffer, Wolfgang (eds.)

2012-05-15

The brochure under consideration consists of contributions to the following aspects: (1) the ATZ ranking of the Top 75 of the companies providing development service; (2) Challenges and opportunities of hybrid vehicles: (3) Localization of sound sources; (4) Sectoral index engineering services.

Enterprise 3.0 in Engineering Education

Science.gov (United States)

Ahrens, Andreas; Zascerinska, Jelena

2011-01-01

Enterprise 3.0 offers potential solutions for the quality, maintenance and sustainable development of services. The synergy between Enterprise 3.0 and engineering education advances the development of innovative products, processes and services in the European economy. Aim of the research is to analyze student engineers' use of Enterprise 3.0…

32 CFR 168a.4 - Policy and procedures.

Science.gov (United States)

2010-07-01

... to pursue graduate degrees in science, engineering, or other fields of study that are designated, in... DEFENSE SCIENCE AND ENGINEERING GRADUATE FELLOWSHIPS § 168a.4 Policy and procedures. (a) Sponsoring... nationwide competition in which all appropriate actions have been taken to encourage applications from...

40 CFR 90.410 - Engine test cycle.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine test cycle. 90.410 Section 90... Procedures § 90.410 Engine test cycle. (a) Follow the appropriate 6-mode test cycle for Class I, I-B and II engines and 2-mode test cycle for Class I-A, III, IV, and V engines when testing spark-ignition engines...

Object oriented development of engineering software using CLIPS

Science.gov (United States)

Yoon, C. John

1991-01-01

Engineering applications involve numeric complexity and manipulations of a large amount of data. Traditionally, numeric computation has been the concern in developing an engineering software. As engineering application software became larger and more complex, management of resources such as data, rather than the numeric complexity, has become the major software design problem. Object oriented design and implementation methodologies can improve the reliability, flexibility, and maintainability of the resulting software; however, some tasks are better solved with the traditional procedural paradigm. The C Language Integrated Production System (CLIPS), with deffunction and defgeneric constructs, supports the procedural paradigm. The natural blending of object oriented and procedural paradigms has been cited as the reason for the popularity of the C++ language. The CLIPS Object Oriented Language's (COOL) object oriented features are more versatile than C++'s. A software design methodology based on object oriented and procedural approaches appropriate for engineering software, and to be implemented in CLIPS was outlined. A method for sensor placement for Space Station Freedom is being implemented in COOL as a sample problem.

42 CFR 408.84 - Billing and payment procedures.

Science.gov (United States)

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Billing and payment procedures. 408.84 Section 408.84 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Billing and payment procedures. (a) Initial premium notice. (1) CMS or its agent always sends the initial...

47 CFR 73.699 - TV engineering charts.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false TV engineering charts. 73.699 Section 73.699 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Television Broadcast Stations § 73.699 TV engineering charts. This section consists of the following Figures...

5 CFR 317.302 - Conversion procedures.

Science.gov (United States)

2010-01-01

... conversion. (2) Pay. Upon conversion to the Senior Executive Service, an employee's SES rate will be... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Conversion procedures. 317.302 Section... IN THE SENIOR EXECUTIVE SERVICE Conversion to the Senior Executive Service § 317.302 Conversion...

Cyber-Informed Engineering

Energy Technology Data Exchange (ETDEWEB)

Anderson, Robert S. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Benjamin, Jacob [Idaho National Lab. (INL), Idaho Falls, ID (United States); Wright, Virginia L. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Quinones, Luis [Idaho National Lab. (INL), Idaho Falls, ID (United States); Paz, Jonathan [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2017-03-01

A continuing challenge for engineers who utilize digital systems is to understand the impact of cyber-attacks across the entire product and program lifecycle. This is a challenge due to the evolving nature of cyber threats that may impact the design, development, deployment, and operational phases of all systems. Cyber Informed Engineering is the process by which engineers are made aware of both how to use their engineering knowledge to positively impact the cyber security in the processes by which they architect and design components and the services and security of the components themselves.

Cyber-Informed Engineering

International Nuclear Information System (INIS)

Anderson, Robert S.; Benjamin, Jacob; Wright, Virginia L.; Quinones, Luis; Paz, Jonathan

2017-01-01

A continuing challenge for engineers who utilize digital systems is to understand the impact of cyber-attacks across the entire product and program lifecycle. This is a challenge due to the evolving nature of cyber threats that may impact the design, development, deployment, and operational phases of all systems. Cyber Informed Engineering is the process by which engineers are made aware of both how to use their engineering knowledge to positively impact the cyber security in the processes by which they architect and design components and the services and security of the components themselves.

Understanding engineering professionalism: a reflection on the rights of engineers.

Science.gov (United States)

Stieb, James A

2011-03-01

Engineering societies such as the National Society of Professional Engineers (NSPE) and associated entities have defined engineering and professionalism in such a way as to require the benefit of humanity (NSPE 2009a, Engineering Education Resource Document. NSPE Position Statements. Governmental Relations). This requirement has been an unnecessary and unfortunate "add-on." The trend of the profession to favor the idea of requiring the benefit of humanity for professionalism violates an engineer's rights. It applies political pressure that dissuades from inquiry, approaches to new knowledge and technologies, and the presentation, publication, and use of designs and research findings. Moreover, a more politically neutral definition of engineering and/or professionalism devoid of required service or benefit to mankind does not violate adherence to strong ethical standards.

Development and evaluation of Standard Operating Procedures (SOPs) for quality control tests and radiological protection activities in a Nuclear Medicine Service

Energy Technology Data Exchange (ETDEWEB)

Krempser, Alexandre R., E-mail: krempser@peb.ufrj.br [Universidade Federal do Rio de Janeiro (PEB/COPPE/UFRJ), RJ (Brazil). Programa de Engenharia Biomedica; Soares, Alexandre B. [Universidade Federal do Rio de Janeiro (IF/UFRJ), Rio de Janeiro, RJ (Brazil). Inst. de Fisica; Corbo, Rossana [Universidade Federal do Rio de Janeiro (FM/UFRJ), Rio de Janeiro, RJ (Brazil). Dept. de Radiologia

2011-07-01

The quality management in Nuclear Medicine Services is a requirement of national and international standards. The Brazilian regulatory agency in health surveillance, the Agencia Nacional de Vigilancia Sanitaria (ANVISA), in its Resolucao de Diretoria Colegiada (Collegiate Directory Resolution) no. 38, requires the elaboration of documents describing the technical and clinical routine activities. This study aimed to elaborate, implement and evaluate Standard Operating Procedures (SOPs) for quality control tests and radiological protection activities in the Nuclear Medicine Service of a university hospital. Eighteen SOPs were developed, involving tasks related to dose calibrator, gamma camera, Geiger-Muller detectors and radiological protection activities. The performance of its application was evaluated for a period of six months. It was observed a reduction in 75% of reported operational errors and 42% of the number of reported incidents with contamination by radioactive material. The SOPs were adequate and successful in its application. New procedures involving clinical activities will also be developed and evaluated. (author)

Procurement of Architectural and Engineering Services for Sustainable Buildings: A Guide for Federal Project Managers

Energy Technology Data Exchange (ETDEWEB)

2004-06-01

This guide was prepared to be a resource for federal construction project managers and others who want to integrate the principles of sustainable design into the procurement of professional building design and consulting services. To economize on energy costs and improve the safety, comfort, and health of building occupants, building design teams can incorporate daylighting, energy efficiency, renewable energy, and passive solar design into all projects in which these elements are technically and economically feasible. The information presented here will help project leaders begin the process and manage the inclusion of sustainable design in the procurement process. The section on establishing selection criteria contains key elements to consider before selecting an architectural and engineering (A/E) firm. The section on preparing the statement of work discusses the broad spectrum of sustainable design services that an A/E firm can provide. Several helpful checklists are included.

Medical Engineering and Microneurosurgery: Application and Future.

Science.gov (United States)

Morita, Akio; Sora, Shigeo; Nakatomi, Hirofumi; Harada, Kanako; Sugita, Naohiko; Saito, Nobuhito; Mitsuishi, Mamoru

2016-10-15

Robotics and medical engineering can convert traditional surgery into digital and scientific procedures. Here, we describe our work to develop microsurgical robotic systems and apply engineering technology to assess microsurgical skills. With the collaboration of neurosurgeons and an engineering team, we have developed two types of microsurgical robotic systems. The first, the deep surgical systems, enable delicate surgical procedures such as vessel suturing in a deep and narrow space. The second type allows for super-fine surgical procedures such as anastomosing artificial vessels of 0.3 mm in diameter. Both systems are constructed with master and slave manipulator robots connected to local area networks. Robotic systems allowed for secure and accurate procedures in a deep surgical field. In cadaveric models, these systems showed a good potential of being useful in actual human surgeries, but mechanical refinements in thickness and durability are necessary for them to be established as clinical systems. The super-fine robotic system made the very intricate surgery possible and will be applied in clinical trials. Another trial included the digitization of surgical technique and scientific analysis of surgical skills. Robotic and human hand motions were analyzed in numerical fashion as we tried to define surgical skillfulness in a digital format. Engineered skill assessment is also feasible and should be useful for microsurgical training. Robotics and medical engineering should bring science into the surgical field and training of surgeons. Active collaboration between medical and engineering teams and academic and industry groups is mandatory to establish such medical systems to improve patient care.

78 FR 54970 - Cotton Futures Classification: Optional Classification Procedure

Science.gov (United States)

2013-09-09

... Service 7 CFR Part 27 [AMS-CN-13-0043] RIN 0581-AD33 Cotton Futures Classification: Optional Classification Procedure AGENCY: Agricultural Marketing Service, USDA. ACTION: Proposed rule. SUMMARY: The... optional cotton futures classification procedure--identified and known as ``registration'' by the U.S...

Civil Engineering in Primary Schools

Science.gov (United States)

Brown, Martin; Strong, Alan

2010-01-01

For many children of primary school age, an engineer is the man who comes to service the central heating system or who fixes the family car when it breaks down. Most have never met a "real" professional engineer, and have no idea of what is involved in the exciting world of engineering. Most assume that engineers are men. To try to…

14 CFR 151.121 - Procedures: Offer; sponsor assurances.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Procedures: Offer; sponsor assurances. 151.121 Section 151.121 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF... Engineering Proposals § 151.121 Procedures: Offer; sponsor assurances. Each sponsor must adopt the following...

23 CFR 668.215 - Programming and project procedures.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Programming and project procedures. 668.215 Section 668.215 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS EMERGENCY RELIEF PROGRAM Procedures for Federal Agencies for Federal Roads § 668.215 Programming...

STAFF TRAINING FOR SERVICE INDUSTRY

Directory of Open Access Journals (Sweden)

O. Petrenko

2015-03-01

Full Text Available In all countries across the world macroeconomic shift from the production of physical things (agriculture and manufactured goods to execution of the service of public service. In headmost countries more than 70% of GDP forms by service industry, in which over half of mankind is working today (according to the information of International Labor Organization. The science of services that occurred recently upon an initiative of IBM firm, designed to explore the main principles of functioning complex services systems, ways of creation, scaling and improving such systems. In this paper considered the questions of penetration the services in engineering systems (particularly, in software structures capabilities of the engineering and staffing processes of creating and maintaining of system services.

Force Measurement Services at Kebs: AN Overview of Equipment, Procedures and Uncertainty

Science.gov (United States)

Bangi, J. O.; Maranga, S. M.; Nganga, S. P.; Mutuli, S. M.

This paper describes the facilities, instrumentation and procedures currently used in the force laboratory at the Kenya Bureau of Standards (KEBS) for force measurement services. The laboratory uses the Force Calibration Machine (FCM) to calibrate force-measuring instruments. The FCM derives its traceability via comparisons using reference transfer force transducers calibrated by the Force Standard Machines (FSM) of a National Metrology Institute (NMI). The force laboratory is accredited to ISO/IEC 17025 by the Germany Accreditation Body (DAkkS). The accredited measurement scope of the laboratory is 1 MN to calibrate force transducers in both compression and tension modes. ISO 376 procedures are used while calibrating force transducers. The KEBS reference transfer standards have capacities of 10, 50, 300 and 1000 kN to cover the full range of the FCM. The uncertainty in the forces measured by the FCM were reviewed and determined in accordance to the new EURAMET calibration guide. The relative expanded uncertainty of force W realized by FCM was evaluated in a range from 10 kN-1 MN, and was found to be 5.0 × 10-4 with the coverage factor k being equal to 2. The overall normalized error (En) of the comparison results was also found to be less than 1. The accredited Calibration and Measurement Capability (CMC) of the KEBS force laboratory was based on the results of those intercomparisons. The FCM enables KEBS to provide traceability for the calibration of class ‘1’ force instruments as per the ISO 376.

A web service for controlling the quality of measurements of global solar irradiation

Energy Technology Data Exchange (ETDEWEB)

Geiger, M.; Menard, L.; Wald, L. [Ecole des Mines, Paris (France). Centre d' Energetique; Diabate, L. [UFAE/GCMI, Bamako (Mali)

2002-12-01

The control of the quality of irradiation data is often a prerequisite to their further processing. Though data are usually controlled by meteorological offices, the sources are so numerous that the user often faces time-series of measurements containing questionable values. As customers of irradiation data, we established our own procedures to screen time-series of measurements. Since this problem of quality control is of concern to many researchers and engineers and since it is often a lengthy and tedious task, we decided to make this screening procedure available to everyone as a web service. This service is the purpose of this paper. The objective is not to perform a precise and fine control, an objective out of reach without details on the site and instruments, but to perform a likelihood control of the data and to check their plausibility. This is achieved by comparing observations with some expectations based upon the extraterrestrial irradiation and a simulation of the irradiation for clear skies. This service is available to everyone on the Web site www.helioclim.net. It offers a very convenient means to check time-series of irradiation: data are input in a HTML page by a copy and paste procedure and the return is also a HTML page that can be analyzed in detail for the data flagged as suspicious. (author)

Discharge communication from inpatient care: an audit of written medical discharge summary procedure against the new National Health Service Standard for clinical handover.

Science.gov (United States)

Reid, Daniel Brooks; Parsons, Shaun R; Gill, Stephen D; Hughes, Andrew J

2015-04-01

To audit written medical discharge summary procedure and practice against Standard Six (clinical handover) of the Australian National Safety and Quality Health Service Standards at a major regional Victorian health service. Department heads were invited to complete a questionnaire about departmental discharge summary practices. Twenty-seven (82%) department heads completed the questionnaire. Seven (26%) departments had a documented discharge summary procedure. Fourteen (52%) departments monitored discharge summary completion and 13 (48%) departments monitored the timeliness of completion. Seven (26%) departments informed the patient of the content of the discharge summary and six (22%) departments provided the patient with a copy. Seven (26%) departments provided training for staff members on how to complete discharge summaries. Completing discharge summaries was usually delegated to the medical intern. The introduction of the National Service Standards prompted an organisation-wide audit of discharge summary practices against the external criterion. There was substantial variation in the organisation's practices. The Standards and the current audit results highlight an opportunity for the organisation to enhance and standardise discharge summary practices and improve communication with general practice.

Medicare Preventive Services Quick Reference Tool

Data.gov (United States)

U.S. Department of Health & Human Services — This educational tool provides the following information on Medicare preventive services Healthcare Common Procedure Coding System (HCPCS)-Current Procedural...

46 CFR 15.820 - Chief engineer.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Chief engineer. 15.820 Section 15.820 Shipping COAST... Computations § 15.820 Chief engineer. (a) There must be an individual holding an MMC or license endorsed as chief engineer or other credential authorizing service as chief engineer employed on board the following...

Engineering Documentation and Data Control

Science.gov (United States)

Matteson, Michael J.; Bramley, Craig; Ciaruffoli, Veronica

2001-01-01

Mississippi Space Services (MSS) the facility services contractor for NASA's John C. Stennis Space Center (SSC), is utilizing technology to improve engineering documentation and data control. Two identified improvement areas, labor intensive documentation research and outdated drafting standards, were targeted as top priority. MSS selected AutoManager(R) WorkFlow from Cyco software to manage engineering documentation. The software is currently installed on over 150 desctops. The outdated SSC drafting standard was written for pre-CADD drafting methods, in other words, board drafting. Implementation of COTS software solutions to manage engineering documentation and update the drafting standard resulted in significant increases in productivity by reducing the time spent searching for documents.

40 CFR 7.90 - Grievance procedures.

Science.gov (United States)

2010-07-01

...) Exception. Recipients with fewer than fifteen (15) full-time employees need not comply with this section... Recipients § 7.90 Grievance procedures. (a) Requirements. Each recipient shall adopt grievance procedures... significantly impair the recipient's ability to provide benefits or services. ...

5 CFR 179.304 - Notification procedures.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Notification procedures. 179.304 Section 179.304 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS CLAIMS COLLECTION STANDARDS Administrative Offset § 179.304 Notification procedures. Before collecting any debt...

Design procedures for heat-straightening repair : an engineering guide.

Science.gov (United States)

1992-12-01

This report summarizes over four years of research on heat-straightening repairs and provides a prototype engineering guide for the application of heat-straightening to bridge structures. It is based on the research results detailed in a companion re...

47 CFR 80.319 - Radiotelegraph distress call and message transmission procedure.

Science.gov (United States)

2010-10-01

...) SAFETY AND SPECIAL RADIO SERVICES STATIONS IN THE MARITIME SERVICES Safety Watch Requirements and Procedures Distress, Alarm, Urgency and Safety Procedures § 80.319 Radiotelegraph distress call and message...

Characteristics of Mobile Payment Procedures

OpenAIRE

Kreyer, Nina; Pousttchi, Key; Turowski, Klaus

2002-01-01

Companies are not going to invest into the development of innovative applications or services unless these can be charged for appropriately. Thus, the existence of standardized and widely accepted mobile payment procedures is crucial for successful business-to-customer mobile commerce. The acceptance of mobile payment procedures depends on costs, security and convenience issues. For the latter, it is important that a procedure can be used over the different payment scenarios mobile commerce, ...

Cross-cultural opening in German outpatient mental healthcare service: an exploratory study of structural and procedural aspects.

Science.gov (United States)

Mösko, Mike-Oliver; Gil-Martinez, Fernanda; Schulz, Holger

2013-01-01

Mental healthcare services need to be sensitive towards the cultural needs of patients. Cross-cultural opening is an organizational process to fulfil these needs. This study aims to provide representative structural and procedural data regarding the use of German outpatient mental healthcare services by allochthonous patients, the diversity of psychotherapists in outpatient mental healthcare service, the cross-cultural encounters of therapists and the cross-cultural sensitivity of psychotherapists working in this healthcare area. Of all public outpatient psychotherapists in Hamburg, 81% (n = 485) participated in this survey. Regarding the distribution of the population in this metropolis, allochthonous therapists were underrepresented. Unlike the overall distribution of foreign inhabitants, the largest groups of immigrant therapists came from England, German-speaking countries and other countries within the European Union. The proportion of allochthonous patients in outpatient mental healthcare service was almost half of the proportion of the allochthonous in the general population. Psychotherapists with a migration background regarded themselves as having a higher level of cross-cultural sensitivity than their native colleagues, especially those who have had fewer cross-cultural encounters. Overall, psychotherapists named different challenges in providing cross-cultural treatment. For the German outpatient mental healthcare service to be more accessible to immigrants and their descendants, a greater number of bilingual psychotherapists must gain access to the mental healthcare service, and more advanced cross-cultural sensitivity training and supervision should be provided. German outpatient psychotherapists are culturally and linguistically diverse. Nevertheless, psychotherapists with a migration background are underrepresented in outpatient mental healthcare services. Patients with a migration background are also underrepresented in the German outpatient mental

47 CFR 73.599 - NCE-FM engineering charts.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false NCE-FM engineering charts. 73.599 Section 73.599 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES RADIO BROADCAST SERVICES Noncommercial Educational FM Broadcast Stations § 73.599 NCE-FM engineering charts. This...

Current procedural terminology; a primer.

Science.gov (United States)

Hirsch, Joshua A; Leslie-Mazwi, Thabele M; Nicola, Gregory N; Barr, Robert M; Bello, Jacqueline A; Donovan, William D; Tu, Raymond; Alson, Mark D; Manchikanti, Laxmaiah

2015-04-01

In 1966, The American Medical Association (AMA) working with multiple major medical specialty societies developed an iterative coding system for describing medical procedures and services using uniform language, the Current Procedural Terminology (CPT) system. The current code set, CPT IV, forms the basis of reporting most of the services performed by healthcare providers, physicians and non-physicians as well as facilities allowing effective, reliable communication among physician and other providers, third parties and patients. This coding system and its maintenance has evolved significantly since its inception, and now goes well beyond its readily perceived role in reimbursement. Additional roles include administrative management, tracking new and investigational procedures, and evolving aspects of 'pay for performance'. The system also allows for local, regional and national utilization comparisons for medical education and research. Neurointerventional specialists use CPT category I codes regularly--for example, 36,215 for first-order cerebrovascular angiography, 36,216 for second-order vessels, and 37,184 for acute stroke treatment by mechanical means. Additionally, physicians add relevant modifiers to the CPT codes, such as '-26' to indicate 'professional charge only,' or '-59' to indicate a distinct procedural service performed on the same day. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Engineering IT-enabled sustainable electricity services the tale of two low-cost green Azores Islands

CERN Document Server

Xie, Le; Liu, Qixing

2013-01-01

Engineering IT-Enabled Electricity Services: The Tale of Two Low-Cost Green Azores Islands covers sustainable energy services to customers - a balanced choice and coordination of energy generated by traditional and alternative sources. The “Green Islands” project represents a decade of work by over a dozen researchers who have developed a model designed to utilize the potential of distributed clean resources. The key is the proper use of Information Technology (IT).  Sited on two islands in the Azores, the project developed the model of careful forecasting of demand and supply, down to the minute, coordinating the output of conventional power plants, wind energy, fly wheels, hydroelectricity, demand reduction, and even plug-in electric vehicles to take full advantage of the clean resources available. This contributed volume presents methods for predicting variable resources, such as wind power generation, and analyzes the achievable accuracy of these predictions. Throughout this book, contributors sho...

An engineering assessment methodology for non-sharp defects in steel structures – Part I: Procedure development

International Nuclear Information System (INIS)

Horn, A.J.; Sherry, A.H.

2012-01-01

This Part I paper describes a new engineering assessment methodology for ferritic steel structures containing non-sharp defects within the context of a Failure Assessment Diagram (FAD) approach. Although the modification of the FAD for non-sharp defects can be applied whether the initiating failure mechanism is cleavage or ductile tearing, this paper focuses on cleavage fracture. The parameters describing the sensitivity of the material toughness to the notch effect can either be measured by testing notched specimens of the same thickness as the structure, or for cleavage fracture they can be obtained using look-up tables generated using the Weibull stress toughness scaling model. The other parameters in the procedure can either be conservatively estimated using simple equations or they can be determined more accurately using finite element analysis. Validation of the new method is presented in the companion Part II paper: this shows that assessments of U-notched SE(B) specimens have significantly reduced conservatism when using the new assessment methodology compared to the standard FAD approach for sharp cracks. - Highlights: ► Development of a new procedure for predicting failure from non-sharp defects. ► Based on a modification of the Failure Assessment Diagram (FAD) approach. ► Applicable to cleavage and ductile tearing initiation although paper focuses on cleavage. ► Validation provided in a companion Part II paper.

Cloud Engineering Principles and Technology Enablers for Medical Image Processing-as-a-Service.

Science.gov (United States)

Bao, Shunxing; Plassard, Andrew J; Landman, Bennett A; Gokhale, Aniruddha

2017-04-01

Traditional in-house, laboratory-based medical imaging studies use hierarchical data structures (e.g., NFS file stores) or databases (e.g., COINS, XNAT) for storage and retrieval. The resulting performance from these approaches is, however, impeded by standard network switches since they can saturate network bandwidth during transfer from storage to processing nodes for even moderate-sized studies. To that end, a cloud-based "medical image processing-as-a-service" offers promise in utilizing the ecosystem of Apache Hadoop, which is a flexible framework providing distributed, scalable, fault tolerant storage and parallel computational modules, and HBase, which is a NoSQL database built atop Hadoop's distributed file system. Despite this promise, HBase's load distribution strategy of region split and merge is detrimental to the hierarchical organization of imaging data (e.g., project, subject, session, scan, slice). This paper makes two contributions to address these concerns by describing key cloud engineering principles and technology enhancements we made to the Apache Hadoop ecosystem for medical imaging applications. First, we propose a row-key design for HBase, which is a necessary step that is driven by the hierarchical organization of imaging data. Second, we propose a novel data allocation policy within HBase to strongly enforce collocation of hierarchically related imaging data. The proposed enhancements accelerate data processing by minimizing network usage and localizing processing to machines where the data already exist. Moreover, our approach is amenable to the traditional scan, subject, and project-level analysis procedures, and is compatible with standard command line/scriptable image processing software. Experimental results for an illustrative sample of imaging data reveals that our new HBase policy results in a three-fold time improvement in conversion of classic DICOM to NiFTI file formats when compared with the default HBase region split policy

AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT XIX, I--ENGINE TUNE-UP--CUMMINS DIESEL ENGINE, II--FRONT END SUSPENSION AND AXLES.

Science.gov (United States)

Minnesota State Dept. of Education, St. Paul. Div. of Vocational and Technical Education.

THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF DIESEL ENGINE TUNE-UP PROCEDURES AND THE DESIGN OF FRONT END SUSPENSION AND AXLES USED ON DIESEL ENGINE EQUIPMENT. TOPICS ARE (1) PRE-TUNE-UP CHECKS, (2) TIMING THE ENGINE, (3) INJECTOR PLUNGER AND VALVE ADJUSTMENTS, (4) FUEL PUMP ADJUSTMENTS ON THE ENGINE (PTR AND PTG),…

Procedure for implementing the system of quality management in the testing laboratory of the Center for Genetic Engineering and Biotechnology in Sancti Spiritus.

Directory of Open Access Journals (Sweden)

Lídice Peraza Cruz

2014-03-01

Full Text Available Implementation of Quality Management System in testing laboratories offers the possibility of its accreditation and a frame for cooperation with other organizations, supporting information and experience exchange, as well as standards and procedures harmonization. To improve the performance of the Center for Genetic Engineering and Biotechnology of Sancti Spíritus testing laboratory, assuring technically valid data and results which promote technical competence and credibility of in vitro diagnostics and biological reagents products, a procedure was designed to implement a Quality Management System. This procedure applies Deming´s Quality Cycle and considers all relevant requirements in NC ISO/IEC 17025:2006 “General requirements for the competence of testing and calibration laboratories” and Regulation No. 20 2004 “Good Manufacturing Practices for in vitro Diagnostics” of Center for State Control of Drugs, Equipment and Medical Devices. We recommend an auto evaluation method, designed by authors, to verify quality management system accomplishment.

5 CFR 179.308 - Accelerated procedures.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Accelerated procedures. 179.308 Section 179.308 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS CLAIMS COLLECTION STANDARDS Administrative Offset § 179.308 Accelerated procedures. OPM may make an administrative...

New Services Development

Directory of Open Access Journals (Sweden)

Peter Ciganek

2004-01-01

Full Text Available Dynamic changes in traditional technologies and rising of new technologies call for development of new services. If service providers want to stay on information technologies market, they must keep track with this trend and adjust their services to customer requirements or develop new services. New applications will mainly depend on communication bandwidth and end users ability to handle it. If network providers will be able to ensure necessary bandwidth, there will be nothing that can stop service providers and developers in new service development. People know about growing necessity of new service and ask for them, but they hardly understand that the most important thing for service providers is merchantability and economic return of resources they gave to the developmentand implementation. By the lack of flexible development environment that is able to develop, test and provide final service for operation, new service development is not easy. There are different new service design procedures for various technological and user areas. This is the reason why this paper provides brief description of new service development procedure from technological and administrative point of view.

40 CFR 1065.405 - Test engine preparation and maintenance.

Science.gov (United States)

2010-07-01

... has undergone a stabilization step (or in-use operation). If the engine has not already been... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Test engine preparation and...) AIR POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Engine Selection, Preparation, and Maintenance § 1065...

Driving and engine cycles

CERN Document Server

Giakoumis, Evangelos G

2017-01-01

This book presents in detail the most important driving and engine cycles used for the certification and testing of new vehicles and engines around the world. It covers chassis and engine-dynamometer cycles for passenger cars, light-duty vans, heavy-duty engines, non-road engines and motorcycles, offering detailed historical information and critical review. The book also provides detailed examples from SI and diesel engines and vehicles operating during various cycles, with a focus on how the engine behaves during transients and how this is reflected in emitted pollutants, CO2 and after-treatment systems operation. It describes the measurement methods for the testing of new vehicles and essential information on the procedure for creating a driving cycle. Lastly, it presents detailed technical specifications on the most important chassis-dynamometer cycles around the world, together with a direct comparison of those cycles.

42 CFR 50.404 - What disputes are covered by these procedures?

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false What disputes are covered by these procedures? 50.404 Section 50.404 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS POLICIES OF GENERAL APPLICABILITY Public Health Service Grant Appeals Procedure § 50.404 What disputes are...

Reliability and safety engineering

CERN Document Server

Verma, Ajit Kumar; Karanki, Durga Rao

2016-01-01

Reliability and safety are core issues that must be addressed throughout the life cycle of engineering systems. Reliability and Safety Engineering presents an overview of the basic concepts, together with simple and practical illustrations. The authors present reliability terminology in various engineering fields, viz.,electronics engineering, software engineering, mechanical engineering, structural engineering and power systems engineering. The book describes the latest applications in the area of probabilistic safety assessment, such as technical specification optimization, risk monitoring and risk informed in-service inspection. Reliability and safety studies must, inevitably, deal with uncertainty, so the book includes uncertainty propagation methods: Monte Carlo simulation, fuzzy arithmetic, Dempster-Shafer theory and probability bounds. Reliability and Safety Engineering also highlights advances in system reliability and safety assessment including dynamic system modeling and uncertainty management. Cas...

Causes and risk factors for fatal accidents in non-commercial twin engine piston general aviation aircraft.

Science.gov (United States)

Boyd, Douglas D

2015-04-01

Accidents in twin-engine aircraft carry a higher risk of fatality compared with single engine aircraft and constitute 9% of all general aviation accidents. The different flight profile (higher airspeed, service ceiling, increased fuel load, and aircraft yaw in engine failure) may make comparable studies on single-engine aircraft accident causes less relevant. The objective of this study was to identify the accident causes for non-commercial operations in twin engine aircraft. A NTSB accident database query for accidents in twin piston engine airplanes of 4-8 seat capacity with a maximum certified weight of 3000-8000lbs. operating under 14CFR Part 91 for the period spanning 2002 and 2012 returned 376 accidents. Accident causes and contributing factors were as per the NTSB final report categories. Total annual flight hour data for the twin engine piston aircraft fleet were obtained from the FAA. Statistical analyses employed Chi Square, Fisher's Exact and logistic regression analysis. Neither the combined fatal/non-fatal accident nor the fatal accident rate declined over the period spanning 2002-2012. Under visual weather conditions, the largest number, n=27, (27%) of fatal accidents was attributed to malfunction with a failure to follow single engine procedures representing the most common contributing factor. In degraded visibility, poor instrument approach procedures resulted in the greatest proportion of fatal crashes. Encountering thunderstorms was the most lethal of all accident causes with all occupants sustaining fatal injuries. At night, a failure to maintain obstacle/terrain clearance was the most common accident cause leading to 36% of fatal crashes. The results of logistic regression showed that operations at night (OR 3.7), off airport landings (OR 14.8) and post-impact fire (OR 7.2) all carried an excess risk of a fatal flight. This study indicates training areas that should receive increased emphasis for twin-engine training/recency. First, increased

46 CFR 15.915 - Engineer Officer Endorsements.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Engineer Officer Endorsements. 15.915 Section 15.915... REQUIREMENTS Equivalents § 15.915 Engineer Officer Endorsements. The following licenses and MMC officer... designated duty engineer license or endorsement authorizes service as chief or assistant engineer on vessels...

Beyond procedures: team reflection in a rail control centre to enhance resilience

NARCIS (Netherlands)

Siegel, A.W.; Schraagen, Johannes Martinus Cornelis

2017-01-01

Resilience engineering concepts can complement proceduralization of complex sociotechnical systems (STS). Proceduralization aims at defining precise and quantified system objectives, and at defining a process that describes and prescribes how to achieve those objectives. Although proceduralization

Beyond procedures : Team reflection in a rail control centre to enhance resilience

NARCIS (Netherlands)

Siegel, A.W.; Schraagen, J.M.C.

2017-01-01

Resilience engineering concepts can complement proceduralization of complex sociotechnical systems (STS). Proceduralization aims at defining precise and quantified system objectives, and at defining a process that describes and prescribes how to achieve those objectives. Although proceduralization

Demarcation of the licensing and supervisory procedures for nuclear engineering installations

International Nuclear Information System (INIS)

Schattke, H.

1986-01-01

The remarks can be summed up under 12 points: 1) The protective purpose outlined in Paragraph 1 No. 2 of the Atomic Energy Law is the top priority for both licensing and regulatory authorities. 2) Both authorities must aim at the best possible prevention of hazards and precautions against risks. 3) The licensing procedures cover applications for licenses, the regulatory procedures check and supervise actual activities. 4) The licensing procedures take precedence in chronology and in substance over the regulatory procedure. 5) The licensing procedure is a preliminary check on the intention to carry out nuclear activities before the event; whereas the regulatory procedure controls the licensee after the event to ensure that the latter's activities really do conform to the framework laid down in the license. 6) The licensing procedure must be verified by state supervision with regard to its prognostic activity. 7) The examination criteria are largely identical for both the authorites. 8) The examination tools for the licensing and regulatory authorities also coincide to a large extent. Legal differences in the possible means of enforcement have no effect in practice. 9) Decisions made by either authority can be either in the licensee's favour or to its disadvantage. Nevertheless, the contents of decisions differ widely between the two authorities. 10) The regulatory authorities execute and prepare the decisions of the licensing authorites. 11) Licensing decisions can be designated static/prognostic, whereas regulatory measures accompany the actual performance of the plant and the operating personnel in a dynamic/controlling manner. 12) Regulatory instructions are usually of a temporary nature, whereas licensing actions are permanent as a rule. (orig.) [de

KNOVEL: A NEW SERVICE FOR THE ENGINEERING COMMUNITY

CERN Multimedia

2001-01-01

Electronic books available on trial at CERN Electronic preprints and journals have become tools used on a daily basis, but so far the CERN Library did not provide a significant collection of electronic books. This is now about to change, so searching for scientific information, and in particular engineering-related references, is now easier than ever before. CERN has access to the electronic book collection via Knovel on a trial base until Xmas. Knovel has a database of some of the leading engineering reference handbooks and conference proceedings, published by Reed Elsevier, ASME, ASM, Butterworth, CRC Press, McGraw-Hill and others. The full-text of all e-books can be searched simultaneously. Another Knovel feature allows users to search for data (materials properties) across the whole digital collection. The Web search engine and display interface has been developed to support a wide range of information and file types: text, tables, equations, graphics, figures. This new resource is linked to from the Libr...

CDMA systems capacity engineering

CERN Document Server

Kim, Kiseon

2004-01-01

This new hands-on resource tackles capacity planning and engineering issues that are crucial to optimizing wireless communication systems performance. Going beyond the system physical level and investigating CDMA system capacity at the service level, this volume is the single-source for engineering and analyzing systems capacity and resources.

A production system for computerized emergency procedures tracking

International Nuclear Information System (INIS)

Petrick, W.; Ng, K.; Stuart, C.; Cain, D.

1988-01-01

This paper describes a methodology used to implement a computerized Emergency Operating Procedures (EOP) tracking system based on artificial intelligence (AI) technologies. In AI parlance, the system is a production system in which the knowledge representation is a set of productions (IF-THEN rules) which are interpreted by an inference engine or rule interpreter. The inference engine looks for pattern matches in the rule premises which lead to a conclusion. This inferred conclusion is subsequently used in further pattern matches. By separating the knowledge representation from the inference engine, the system can readily accommodate changes to the written procedures. The system is written in the C language and is co-resident on the same computer as the Safety Parameter Display System (SPDS). The plant EOPs have been written in about 250 rules which are evaluated in less than one second using about 10-20% of the CPU. The conclusions are available to multiple users within seconds after a parameter value changes. The benefits achieved with this production rule system include compatibility with the written procedures used as the knowledge source, compatibility with control room instrumentation, compatibility with the SPDS, realtime performance, and efficient computer usage

Jacobs Engineering Group Inc. receives architectural and engineering design contract from Stanford Linear Accelerator Centre

CERN Multimedia

2004-01-01

"Jacobs Engineering Group Inc. announced that a subsidiary company won a contract from Stanford Linear Accelerator Center (SLAC), to provide architectural and engineering design services for the Linac Coherent Light Source (LCLS) conventional facilities" (1/2 page)

[Exposure to electrocution by automotive ignition system in the work environment of car service employees].

Science.gov (United States)

Fryśkowski, Bernard; Swiatek-Fryśkowska, Dorota

2014-01-01

Automotive ignition system diagnostic procedures involve a specific kind of action due to the presence of high voltage pulses rated of roughly several dozen kilovolts. Therefore, the repairers employed at car service coming into direct contact with electrical equipment of ignition systems are exposed to risk of electric shock. Typically, the electric discharge energy of automotive ignition systems is not high enough to cause fibrillation due to the electric effect on the heart. Nevertheless, there are drivers and car service employees who use electronic cardiac pacemakers susceptible to high voltage pulses. The influence of high-voltage ignition systems on the human body, especially in case of electric injury, has not been comprehensively elucidated. Therefore, relatively few scientific papers address this problem. The aim of this paper is to consider the electrical injury danger from automotive ignition systems, especially in people suffering from cardiac diseases. Some examples of the methods to reduce electric shock probability during diagnostic procedures of spark-ignition combustion engines are presented and discussed.

UPS fellowships support creative engineering research

OpenAIRE

Crumbley, Liz

2007-01-01

A new $40,000 grant marks the 11th anniversary of support from the United Parcel Service (UPS) Foundation for doctoral fellowships in the Human Factors and Safety Engineering Graduate Program in the Grado Department of Industrial and Systems Engineering (ISE) in the College of Engineering.

Global Software Engineering

DEFF Research Database (Denmark)

Ebert, Christof; Kuhrmann, Marco; Prikladnicki, Rafael

2016-01-01

Professional software products and IT systems and services today are developed mostly by globally distributed teams, projects, and companies. Successfully orchestrating Global Software Engineering (GSE) has become the major success factor both for organizations and practitioners. Yet, more than...... and experience reported at the IEEE International Conference on Software Engineering (ICGSE) series. The outcomes of our analysis show GSE as a field highly attached to industry and, thus, a considerable share of ICGSE papers address the transfer of Software Engineering concepts and solutions to the global stage...

Design and drafting document control procedures for CPRF/ZTH experiment

International Nuclear Information System (INIS)

Pollat, L.L.; Kewish, R.W.

1989-01-01

This paper will present, in general, the control procedures for design approval, review, changes, and release of engineering documents. It will also discuss interface control for tasks so that possible design interference does not occur. A document control procedure to insure that design criteria are met and technical specifications translate into workable drawings was instituted to support the Confinement Physics Research Facility (CPRF/ZTH) construction program. Our goal, to eliminate any conflicts that might arise between various tasks as the final designs are developed, required tight control and up-to-date design information. Detailed procedure for reviews were instituted, since circumventing the process of design and drafting anywhere might have proven disastrous to the CPRF/ZTH program. Design is a process of translating technical requirements, according to established standards, into drawings that are usable for fabrication and assembly. Both the designer and engineer are responsible for adhering to standards that have been established by the Mechanical Engineering Section for the CPRF/ZTH program. 6 refs., 5 figs

Acquisition Policy and Procedures Program

National Research Council Canada - National Science Library

2001-01-01

This Instruction establishes policies, responsibilities, and procedures for the procurement of goods and services to include supplies, equipment, publications, furniture, and information technology...

Tokamak engineering mechanics

International Nuclear Information System (INIS)

Song, Yuntao; Wu, Weiyue; Du, Shijun

2014-01-01

Provides a systematic introduction to tokamaks in engineering mechanics. Includes design guides based on full mechanical analysis, which makes it possible to accurately predict load capacity and temperature increases. Presents comprehensive information on important design factors involving materials. Covers the latest advances in and up-to-date references on tokamak devices. Numerous examples reinforce the understanding of concepts and provide procedures for design. Tokamak Engineering Mechanics offers concise and thorough coverage of engineering mechanics theory and application for tokamaks, and the material is reinforced by numerous examples. Chapter topics include general principles, static mechanics, dynamic mechanics, thermal fluid mechanics and multiphysics structural mechanics of tokamak structure analysis. The theoretical principle of the design and the methods of the analysis for various components and load conditions are presented, while the latest engineering technologies are also introduced. The book will provide readers involved in the study of mechanical/fusion engineering with a general understanding of tokamak engineering mechanics.

Rock engineering applications, 1991

International Nuclear Information System (INIS)

Franklin, J.A.; Dusseault, M.B.

1991-01-01

This book demonstrates how to apply the theories and principles of rock engineering to actual engineering and construction tasks. It features insights on geology for mining and tunnelling applications. It is practical resource that focuses on the latest technological innovation and examines up-to-date procedures used by engineers for coping with complex rock conditions. The authors also discuss question related to underground space, from design approaches to underground housing and storage. And they cover the monitoring of storage caverns for liquid and gaseous products or toxic and radioactive wastes

40 CFR 91.410 - Engine test cycle.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine test cycle. 91.410 Section 91...) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Gaseous Exhaust Test Procedures § 91.410 Engine test cycle. (a) The 5-mode cycle specified in Table 2 in appendix A to this subpart shall be followed...

48 CFR 17.504 - Ordering procedures.

Science.gov (United States)

2010-10-01

... METHODS AND CONTRACT TYPES SPECIAL CONTRACTING METHODS Interagency Acquisitions Under the Economy Act 17.504 Ordering procedures. (a) Before placing an Economy Act order for supplies or services with another...; see also 6.302 for procedures to follow where using other than full and open competition.) The...

8 CFR 270.2 - Enforcement procedures.

Science.gov (United States)

2010-01-01

... Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS PENALTIES FOR DOCUMENT FRAUD § 270.2 Enforcement procedures. (a) Procedures for the filing of complaints. Any person or entity... charges for document fraud committed by refugees at the time of entry. The Service shall not issue a...

9 CFR 381.311 - Recall procedure.

Science.gov (United States)

2010-01-01

... CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Canning and Canned Products § 381.311 Recall procedure... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Recall procedure. 381.311 Section 381.311 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY...

Developing excellence awareness at Davis-Besse through engineering quality management

International Nuclear Information System (INIS)

Gaudette, M.R.; Lash, J.H.; Haiman, D.L.

1989-01-01

At Davis-Besse nuclear power station engineering quality management includes a variety of chartered functions whose ultimate objective is to improve product and service quality and process efficiency. These functions were assigned in late 1988 to engineering assurance personnel, a section of the engineering department which reports directly to the engineering director but is independent of design activities. This independence ensures objectivity and allows the improvement process to span functional areas so that changes made in one engineering section do not negatively impact the activities of another section. The engineering quality management functions performed by the engineering assurance group are summarized. Engineering quality management at Davis-Besse has increased the degree of excellence evident in engineering products and services

Fatigue in engineering structures. A three fold analysis approach

International Nuclear Information System (INIS)

Malik, Afzaal M.; Qureshi, Ejaz M.; Dar, Naeem Ullah; Khan, Iqbal

2007-01-01

The integrity in most of the engineering structures in influenced by the presence of cracks or crack like defects. These structures fail, even catastrophically if a crack greater than a critically safe size exist. Although most of the optimal designed structures are initially free from critical cracks, sub-critical cracks can lead to failures under cyclic loadings, called fatigue crack growth. It is nearly impractical to prevent sub-critical crack growth in engineering structures particularly in crack sensitive structures like most of the structures in nuclear, aerospace and aeronautical domains. However, it is essential to predict the fatigue crack growth for these structures to preclude the in service failures causing loss of assets. The present research presents an automatic procedure for the prediction of fatigue crack growth in three dimensional engineering structures and the key data for the fracture mechanics based design: the stress intensity factors. Three fold analysis procedures are adopted to investigate the effects of repetitive (cyclic) loadings on the fatigue life of different geometries of aluminum alloy 2219-O. A general purpose Finite Element (FE) Code ANSYS-8.0 is used to predict/estimate the fatigue life of the geometries. Computer codes utilizing the Green's Function are developed to calculate the stress intensity factors. Another code based on superposition technique presented by Shivakumara and Foreman is developed to calculate the fatigue crack growth rate, fatigue life (No. of loading cycles are developed to validate the results and finally full scale laboratory tests are conducted for the comparison of the results. The results showing a close co-relation between the different techniques employed gives the promising feature of the analysis approach for the future work. (author)

Sampling programs for pre-service and in-service inspection

International Nuclear Information System (INIS)

Goodman, J.

1987-01-01

The paper outlines methods for practising engineers and statisticians: 1) Classification of sampling procedures and methods; 2) choice of sampling method; 3) criteria of acceptable quality; 4) evaluation of biased samples and nonuniform populations. (HP)

Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Waste Disposal Facility

Energy Technology Data Exchange (ETDEWEB)

Ansley, Shannon Leigh

2002-02-01

The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist.

Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Wastewater Discharge Facility

International Nuclear Information System (INIS)

Ansley, Shannon L.

2002-01-01

The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist

Risk analysis procedure for post-wildfire natural hazards in British Columbia

Science.gov (United States)

Jordan, Peter

2010-05-01

Following a severe wildfire season in 2003, and several subsequent damaging debris flow and flood events, the British Columbia Forest Service developed a procedure for analysing risks to public safety and infrastructure from such events. At the same time, the Forest Service undertook a research program to determine the extent of post-wildfire hazards, and examine the hydrologic and geomorphic processes contributing to the hazards. The risk analysis procedure follows the Canadian Standards Association decision-making framework for risk management (which in turn is based on international standards). This has several steps: identification of risk, risk analysis and estimation, evaluation of risk tolerability, developing control or mitigation strategies, and acting on these strategies. The Forest Service procedure deals only with the first two steps. The results are passed on to authorities such as the Provincial Emergency Program and local government, who are responsible for evaluating risks, warning residents, and applying mitigation strategies if appropriate. The objective of the procedure is to identify and analyse risks to public safety and infrastructure. The procedure is loosely based on the BAER (burned area emergency response) program in the USA, with some important differences. Our procedure focuses on identifying risks and warning affected parties, not on mitigation activities such as broadcast erosion control measures. Partly this is due to limited staff and financial resources. Also, our procedure is not multi-agency, but is limited to wildfires on provincial forest land; in British Columbia about 95% of forest land is in the publicly-owned provincial forest. Each fire season, wildfires are screened by size and proximity to values at risk such as populated areas. For selected fires, when the fire is largely contained, the procedure begins with an aerial reconnaissance of the fire, and photography with a hand-held camera, which can be used to make a

40 CFR 86.347-79 - Alternative calculations for diesel engines.

Science.gov (United States)

2010-07-01

... Emission Regulations for New Gasoline-Fueled and Diesel-Fueled Heavy-Duty Engines; Gaseous Exhaust Test Procedures § 86.347-79 Alternative calculations for diesel engines. (a) This section applies to Diesel engines only. Gasoline-fueled engines must use the calculations in § 86.345. (b) For Diesel engines, the...

An engineering approach to common mode failure analysis

International Nuclear Information System (INIS)

Gangloff, W.C.; Franke, T.H.

1975-01-01

Safety systems for nuclear reactors can be designed using standard reliability engineering techniques such that system failure due to random component faults is extremely unlikely. However, the common-mode failure where several components fail together from a common cause is not susceptible to prevention by the usual tactics. In systems where a high degree of redundancy has been employed, the actual reliability of the system in service may be limited by common-mode failures. A methodical and thorough procedure for evaluation of system vulnerability to common-mode failures is presented. This procedure was developed for use in nuclear reactor safety systems and has been applied specifically to reactor protection. The method offers a qualitative assessment of a system whereby weak points can be identified and the resistance to common-mode failure can be judged. It takes into account all factors influencing system performance including design, manufacturing, installation, operation, testing, and maintenance. It is not a guarantee or sure solution, but rather a practical tool which can provide good assurance that the probability of common-mode protection failure has been made acceptably low. (author)

40 CFR 89.410 - Engine test cycle.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine test cycle. 89.410 Section 89... Procedures § 89.410 Engine test cycle. (a) Emissions shall be measured using one of the test cycles specified...) through (a)(4) of this section. These cycles shall be used to test engines on a dynamometer. (1) The 8...

Auditing Search Engines for Differential Satisfaction Across Demographics

OpenAIRE

Mehrotra, R.; Anderson, A.; Diaz, F.; Sharma, A.; Wallach, H. M.; Yilmaz, E.

2017-01-01

Many online services, such as search engines, social media platforms, and digital marketplaces, are advertised as being available to any user, regardless of their age, gender, or other demographic factors. However, there are growing concerns that these services may systematically underserve some groups of users. In this paper, we present a framework for internally auditing such services for differences in user satisfaction across demographic groups, using search engines as a case study. We fi...

Environmental Impact Assessment: A Procedure.

Science.gov (United States)

Stover, Lloyd V.

Prepared by a firm of consulting engineers, this booklet outlines the procedural "whys and hows" of assessing environmental impact, particularly for the construction industry. Section I explores the need for environmental assessment and evaluation to determine environmental impact. It utilizes a review of the National Environmental Policy Act and…

Web services foundations

CERN Document Server

Bouguettaya, Athman; Daniel, Florian

2013-01-01

Web services and Service-Oriented Computing (SOC) have become thriving areas of academic research, joint university/industry research projects, and novel IT products on the market. SOC is the computing paradigm that uses Web services as building blocks for the engineering of composite, distributed applications out of the reusable application logic encapsulated by Web services. Web services could be considered the best-known and most standardized technology in use today for distributed computing over the Internet.Web Services Foundations is the first installment of a two-book collection coverin

Detecting A Botnet By Reverse Engineering

Directory of Open Access Journals (Sweden)

Oesman Hendra Kelana

2013-06-01

Full Text Available Abstract— Botnet malware is a malicious program. Botnet that infects computers, called bots, will be controlled by a botmaster to do various things such as: spamming, phishing, keylogging Distributed Denial of Service (DDoS and other activities that are generally profitable to the owner of the bot (botmaster or those who use botnet services. The problem is that many computers have been controlled by botnets without the knowledge of the computer owner.  There are many ways to examine botnets, for example by studying the traffic from the botnet network, studying how botnets communicate to each, studying how each robot receives orders to do something, and so forth. Of the many methods, the most frequently and commonly used is the reverse engineering, where researchers study how a botnet works by botnet debugging. In this study the author tries to understand or research botnets by taking a type of botnet, namely Agobot, using reverse engineering.  One of the result of the research is that malware program files in general and in particular botnet has a technique to obscure the way that research using reverse engineering. Another result also shows that the botnet Agobot runs on computers by using the Windows service, and by changing the Windows registry so that every time the computer starts, Agobot always actively works in the computer memory. Keywords— Malware, Bot, Botnet, Botmaster, Agobot, Spam, Distributed Denial of Services, Identity Theft, Computer Security, Reverse Engineering, Debug, Windows Service, the Registry.

Matcom 86: Engineering materials in South Africa

International Nuclear Information System (INIS)

1986-01-01

The Symposium MATCOM '86 represents a significant departure from the usual format of scientific and engineering conferences. It provides a unique opportunity for industrialists, economists, the engineering and scientific communities, and research and development establishments to be briefed on critical issues relating to engineering materials and the effect of these materials on the manufacturing, service, health, strategic and minerals industries. Profitability and productivity in industry can often be linked to engineering materials and their in-service performance. Major surveys conducted in South Africa and developed countries have revealed the significance of losses to industry due to materials degradation problems such as fracture, wear, corrosion etc. One of the papers delivered at this symposium focus on the nuclear engineering industry, namely the application of materials in the field of uranium enrichment

5 CFR 5502.105 - Agency procedures.

Science.gov (United States)

2010-01-01

....105 Administrative Personnel DEPARTMENT OF HEALTH AND HUMAN SERVICES SUPPLEMENTAL FINANCIAL DISCLOSURE REQUIREMENTS FOR EMPLOYEES OF THE DEPARTMENT OF HEALTH AND HUMAN SERVICES § 5502.105 Agency procedures. (a) The designated agency ethics official or, with the concurrence of the designated agency ethics official, each of...

Product with service, technology with business model

DEFF Research Database (Denmark)

Sakao, Tomohiko; McAloone, Tim C.

2011-01-01

Looking back over the last decade, the importance of an expanded understanding of engineering design has been shared within the engineering design community. Presented concepts and methods to support such expansion include Functional Product Development, Service Engineering, and Product/Service-S...... promising concept beyond PSS design; via an integrated development of technology and business model. This can be of particular interest for further research, especially due to its high freedom for designers....

Systems engineering: A problem of perception

Energy Technology Data Exchange (ETDEWEB)

Senglaub, M.

1995-08-01

The characterization of systems engineering as a discipline, process, procedure or a set of heuristics will have an impact on the implementation strategy, the training methodology, and operational environment. The systems engineering upgrade activities in the New Mexico Weapons Development Center and a search of systems engineering related information provides evidence of a degree of ambiguity in this characterization of systems engineering. A case is made in this article for systems engineering being the engineering discipline applied to the science of complexity. Implications of this characterization and some generic issues are delineated with the goal of providing an enterprise with a starting point for developing its business environment.

Service Providers’ Willingness to Change as Innovation Inductor in Services: Validating a Scale

Directory of Open Access Journals (Sweden)

Marina Figueiredo Moreir

2016-12-01

Full Text Available This study explores the willingness of service providers to incorporate changes suggested by clients altering previously planned services during its delivery, hereby named Willingness to Change in Services [WCS]. We apply qualitative research techniques to map seven dimensions related to this phenomenon: Client relationship management; Organizational conditions for change; Software characteristics and development; Conditions affecting teams; Administrative procedures and decision-making conditions; Entrepreneurial behavior; Interaction with supporting organizations. These dimensions have been converted into variables composing a WCS scale later submitted to theoretical and semantic validations. A scale with 26 variables resulted from such procedures was applied on a large survey carried out with 351 typical Brazilian software development service companies operating all over the country. Data from our sample have been submitted to multivariate statistical analysis to provide validation for the scale. After factorial analysis procedures, 24 items have been validated and assigned to three factors representative of WCS: Organizational Routines and Values – 12 variables; Organizational Structure for Change – 6 variables; and Service Specificities – 6 variables. As future contributions, we expect to see further testing for the WCS scale on alternative service activities to provide evidence about its limits and contributions to general service innovation theory.

48 CFR 836.606-71 - Architect-engineer's proposal.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Architect-engineer's... AFFAIRS SPECIAL CATEGORIES OF CONTRACTING CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS Architect-Engineer Services 836.606-71 Architect-engineer's proposal. (a) When the contract price is estimated to be $50,000...

50 CFR 85.21 - Application procedures.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Application procedures. 85.21 Section 85... Application for Grants § 85.21 Application procedures. (a) Eligible applicants will submit their proposals to..., Missouri, Ohio, and Wisconsin Division of Federal Aid, U.S. Fish and Wildlife Service, Bishop Henry Whipple...

New procedure for departure formalities

CERN Multimedia

HR & GS Departments

2011-01-01

As part of the process of simplifying procedures and rationalising administrative processes, the HR and GS Departments have introduced new personalised departure formalities on EDH. These new formalities have applied to students leaving CERN since last year and from 17 October 2011 this procedure will be extended to the following categories of CERN personnel: Staff members, Fellows and Associates. It is planned to extend this electronic procedure to the users in due course. What purpose do departure formalities serve? The departure formalities are designed to ensure that members of the personnel contact all the relevant services in order to return any necessary items (equipment, cards, keys, dosimeter, electronic equipment, books, etc.) and are aware of all the benefits to which they are entitled on termination of their contract. The new departure formalities on EDH have the advantage of tailoring the list of services that each member of the personnel must visit to suit his individual contractual and p...

5 CFR 179.309 - Additional administrative procedures.

Science.gov (United States)

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Additional administrative procedures. 179.309 Section 179.309 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS CLAIMS COLLECTION STANDARDS Administrative Offset § 179.309 Additional administrative procedures. Nothing...

Engineering department annual progress report 1 January -31 December 1978

International Nuclear Information System (INIS)

1979-07-01

A representative survey of the activities of the Engineering Department during 1978 is given followed by brief presentation of selected activities. Main activity areas are structural mechanics, engineering services, and technical support service and logistics. (author)

Proposal for the increase of the contract amounts for LHC civil engineering construction and civil engineering consultancy contracts

CERN Document Server

2001-01-01

This document concerns the increase of the contract amounts for LHC civil engineering construction contracts and civil engineering consultancy contracts. The Finance Committee is invited to agree to the increase of the contract amounts with: - the joint venture TEERAG-ASDAG (AT), C. BARESEL (DE) and LOCHER (CH) for civil engineering construction, package 1, for a revised total amount of 91 500 000 Swiss francs, subject to revision; - the joint venture EDF (FR) and KNIGHT&PIESOLD (GB) for the provision of civil engineering consultancy services, package 1, for a revised total amount of 14 400 000 Swiss francs, subject to revision; - the joint venture TAYLOR WOODROW (GB), AMEC (GB) and SPIE BATIGNOLLES (FR) for civil engineering construction, package 3a, for a revised total amount of 118 000 000 Swiss francs, subject to revision; - the joint venture BROWN&ROOT (GB), INTECSA (ES) and HIDROTECNICA (PT) for the provision of civil engineering consultancy services, package 3, for a revised total amount of 14 ...

AUTOMOTIVE DIESEL MAINTENANCE 1. UNIT XI, PART I--MAINTAINING THE FUEL SYSTEM (PART I), CUMMINS DIESEL ENGINES, PART II--UNIT REPLACEMENT (ENGINE).

Science.gov (United States)

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF DIFFERENCES BETWEEN TWO AND FOUR CYCLE ENGINES, THE OPERATION AND MAINTENANCE OF THE DIESEL ENGINE FUEL SYSTEM, AND THE PROCEDURES FOR DIESEL ENGINE REMOVAL. TOPICS ARE (1) REVIEW OF TWO CYCLE AND FOUR CYCLE CONCEPT, (2) SOME BASIC CHARACTERISTICS OF FOUR CYCLE ENGINES,…

Engineer: The Professional Bulletin of Army Engineers, Jan-Apr 2010

Science.gov (United States)

2010-04-01

Dornstadter 51 Transformation in Korea By Major Rafael Pazos and Captain Miguel Uc Headquarters, Department of the ArmyVolume 40 PB 5-10-1...States with an By Major Rafael Pazos and Captain Miguel Uc January-April 201052 Engineer initial grant of 205 acres at USAG–Humphreys, allowing the...the quality of life of our Service members. Major Pazos is the deputy commander of the United States Army Corps of Engineers (USACE), Gulf Region

Comparison between Famous Game Engines and Eminent Games

Directory of Open Access Journals (Sweden)

Prerna Mishra

2016-09-01

Full Text Available Nowadays game engines are imperative for building 3D applications and games. This is for the reason that the engines appreciably reduce resources for employing obligatory but intricate utilities. This paper elucidates about a game engine, popular games developed by these engines and its foremost elements. It portrays a number of special kinds of contemporary game developed by engines in the way of their aspects, procedure and deliberates their stipulations with comparison.

Beyond the gats: Implicit engines in services RTAs

Directory of Open Access Journals (Sweden)

Daniltsev Alexander

2015-01-01

Full Text Available In the last 15 years the reciprocity of regional trade agreements on services has become a global phenomenon. Whereas main provisions regulating access to the services market are fixed by specific obligations under the General Agreement on Trade in Services, RTAs have been considered a flexible means for liberalization and an expedient to protect national service providers. This article explores the role of the GATS and other agreements, both under and not under the mandate of the World Trade Organization, in trade blocs. The econometric model developed by the authors shows that the removal of restrictions for foreign suppliers under domestic regulation (consumer protection, regulation of labor market and the elimination of discriminatory measures on foreign investments that affect trade in goods are likely to be more important for the expansion of services trade on a preferential basis than the GATS-type liberalization.

Coding for urologic office procedures.

Science.gov (United States)

Dowling, Robert A; Painter, Mark

2013-11-01

This article summarizes current best practices for documenting, coding, and billing common office-based urologic procedures. Topics covered include general principles, basic and advanced urologic coding, creation of medical records that support compliant coding practices, bundled codes and unbundling, global periods, modifiers for procedure codes, when to bill for evaluation and management services during the same visit, coding for supplies, and laboratory and radiology procedures pertinent to urology practice. Detailed information is included for the most common urology office procedures, and suggested resources and references are provided. This information is of value to physicians, office managers, and their coding staff. Copyright © 2013 Elsevier Inc. All rights reserved.

45 CFR 1326.23 - Hearing procedures.

Science.gov (United States)

2010-10-01

..., DEPARTMENT OF HEALTH AND HUMAN SERVICES THE ADMINISTRATION ON AGING, OLDER AMERICANS PROGRAMS GRANTS TO INDIAN TRIBES FOR SUPPORT AND NUTRITION SERVICES § 1326.23 Hearing procedures. In meeting the... Administration on Aging; (3) Present written evidence prior to and at the hearing, and present oral evidence at...

Evaluation of Current Automated Civil Engineer System Non-Appropriated Funds Project Programming Procedures

National Research Council Canada - National Science Library

Ligday, Joshua

2004-01-01

...) to support the changing needs of the organization. The Air Force civil engineering organization is no exception since they have drastically improved their Automated Civil Engineer System (ACES...

42 CFR 50.403 - What is the policy basis for these procedures?

Science.gov (United States)

2010-10-01

... 42 Public Health 1 2010-10-01 2010-10-01 false What is the policy basis for these procedures? 50.403 Section 50.403 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS POLICIES OF GENERAL APPLICABILITY Public Health Service Grant Appeals Procedure § 50.403 What is the policy...

Appropriate levels of service

CSIR Research Space (South Africa)

Wall, K

2010-02-01

Full Text Available The term "services", as used in this article, broadly refers to infrastructure (in particular, civil and electrical engineering infrastructure), and also the infrastructure elements such as schools, clinics and halls. The term "basic services...

47 CFR 2.947 - Measurement procedure.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Measurement procedure. 2.947 Section 2.947 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL FREQUENCY ALLOCATIONS AND RADIO TREATY MATTERS; GENERAL... Commission and published by national engineering societies such as the Electronic Industries Association, the...

Multimedia Software Laboratory | College of Engineering & Applied Science

Science.gov (United States)

Support Milwaukee Engineering Research Conference 2018 Poster Competition Business Corporate Partners Engineer Research Collaborations Corporate Services Product Realization Business Tour Give Entrepreneurship -oriented methods, and performance analysis. Research Message from the Associate Dean Milwaukee Engineerâ

Introduction to biomedical engineering

CERN Document Server

Enderle, John D; Blanchard, Susan M

2005-01-01

Under the direction of John Enderle, Susan Blanchard and Joe Bronzino, leaders in the field have contributed chapters on the most relevant subjects for biomedical engineering students. These chapters coincide with courses offered in all biomedical engineering programs so that it can be used at different levels for a variety of courses of this evolving field. Introduction to Biomedical Engineering, Second Edition provides a historical perspective of the major developments in the biomedical field. Also contained within are the fundamental principles underlying biomedical engineering design, analysis, and modeling procedures. The numerous examples, drill problems and exercises are used to reinforce concepts and develop problem-solving skills making this book an invaluable tool for all biomedical students and engineers. New to this edition: Computational Biology, Medical Imaging, Genomics and Bioinformatics. * 60% update from first edition to reflect the developing field of biomedical engineering * New chapters o...

40 CFR 91.409 - Engine dynamometer test run.

Science.gov (United States)

2010-07-01

... at rated speed and maximum power for 25 to 30 minutes; (iv) Option. For four-stroke engines, where... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine dynamometer test run. 91.409... (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Gaseous Exhaust Test Procedures § 91.409...

46 CFR 160.151-57 - Servicing procedure.

Science.gov (United States)

2010-10-01

... pressure-relief valves. (2) Gradually raise the pressure to the lesser of 2 times the design working... liferaft on its outside canopy, or on a servicing-record panel on an interior portion of one of its... year of expiration superimposed over a background color that corresponds to the colors specified for...

Simultaneous engineering; Simultaneous Engineering bei der Entwicklung der Motorenbaureihen

Energy Technology Data Exchange (ETDEWEB)

Reifenscheid, O. [Entwicklung Kommerzielle Motoren, MTU, Friedrichshafen (Germany)

1997-10-01

At a time when the German industry is faced with world-wide competition and the recent recession has not been fully overcome, the subject of simultaneous engineering is very popular. A series of punch words such as Lean Management, TQM, (Total Quality Management), Lean Production, KVP, Kaizen, Value Management, etc. are considered as synonyms for strategies by which product development is to be made more efficient and production more economical, faster and more flexible. In this respect the co-ordination between market, company the human element, procedure and structure play a major role. The present paper describes Simultaneous Enginering (SE) from the standpoint of the research engineer; provides information regarding the degree of implementation of SE at MTU and presents some of the author`s personal thoughts and experiences for discussion. (orig.)

Foundations of Blueprint for Cloud-based Service Engineering

OpenAIRE

Nguyen, D.K.

2011-01-01

Current cloud-based service offerings are often provided as one-size-fits-all solution and give little or no room for customization. This limits the ability for application developers to pick and choose offerings from multiple software, platform and infrastructure service providers and configure them dynamically and in an optimal fashion to address their application requirements. Furthermore, combining different independent cloud-based services necessitates a uniform description format that f...

Value-based service modeling and design : Toward a unified view of services

NARCIS (Netherlands)

Weigand, H.; Johannesson, P.; Andersson, B.; Bergholtz, M.; van Eck, P.; Gordijn, J.; Wierenga, R.J.

2009-01-01

Service-oriented architectures are the upcoming business standard for realizing enterprise information systems, thus creating a need for analysis and design methods that are truly service-oriented. Most research on this topic so far takes a software engineering perspective. For a proper alignment

[Costing nuclear medicine diagnostic procedures].

Science.gov (United States)

Markou, Pavlos

2005-01-01

To the Editor: Referring to a recent special report about the cost analysis of twenty-nine nuclear medicine procedures, I would like to clarify some basic aspects for determining costs of nuclear medicine procedure with various costing methodologies. Activity Based Costing (ABC) method, is a new approach in imaging services costing that can provide the most accurate cost data, but is difficult to perform in nuclear medicine diagnostic procedures. That is because ABC requires determining and analyzing all direct and indirect costs of each procedure, according all its activities. Traditional costing methods, like those for estimating incomes and expenses per procedure or fixed and variable costs per procedure, which are widely used in break-even point analysis and the method of ratio-of-costs-to-charges per procedure may be easily performed in nuclear medicine departments, to evaluate the variability and differences between costs and reimbursement - charges.

76 FR 51431 - Ericsson Services, Inc., Currently Known as Ericsson, Inc., Service Assurance, Deployment and...

Science.gov (United States)

2011-08-18

... Services, Inc., Currently Known as Ericsson, Inc., Service Assurance, Deployment and Integration, and... Known as Ericsson, Inc., Service Assurance, Deployment and Integration, and Engineering and IS/IT... Regarding Eligibility To Apply for Worker Adjustment Assistance In accordance with Section 223 of the Trade...

Engineering study of riser equipment contamination

International Nuclear Information System (INIS)

BOGER, R.M.

1999-01-01

This Engineering Study was to evaluate the current equipment and operating procedures to determine if changes could be made to improve ALARA and evaluate the feasibility of implementing the proposed solutions. As part of this study input from the cognizant characterization engineers and operating sampling crews was obtained and evaluated for ALARA improvements

Over-servicing

African Journals Online (AJOL)

The definition of 'over-servicing' in the Guidelines can assist in defining a meaning for ... As South Africa (SA) has no ethical guidelines for practitioners defining ... principle applies to referrals to another healthcare practitioner for a service or a procedure ... 'Underservicing' generally means failing to provide a patient with.

Advanced web services

CERN Document Server

Bouguettaya, Athman; Daniel, Florian

2013-01-01

Web services and Service-Oriented Computing (SOC) have become thriving areas of academic research, joint university/industry research projects, and novel IT products on the market. SOC is the computing paradigm that uses Web services as building blocks for the engineering of composite, distributed applications out of the reusable application logic encapsulated by Web services. Web services could be considered the best-known and most standardized technology in use today for distributed computing over the Internet. This book is the second installment of a two-book collection covering the state-o

Teaching sustainability in engineering solutions with Campus Service as case

DEFF Research Database (Denmark)

Olsen, Stig Irving; McAloone, Tim C.; Nielsen, Susanne Balslev

2014-01-01

Engineers potentially influence the sustainability of technological solutions significantly. At DTU Management Engineering we aim to address sustainability to all engineering students at DTU. One of the means to address students throughout DTU is the establishment of a course aimed at bachelor...... students on all study lines. The objectives of the course is for the participants to acquire an understanding of the basic concept of sustainability and its three dimensions as well as getting an overview of a number of tools for analysis and synthesis of solutions that are sustainable throughout...... their life cycle and acquire the skills to use the most central of the tools. Furthermore, they should understand the engineer's role and responsibility in the development of sustainable solutions. Examples of learning outcomes are: Explain that each sustainability dimension is multifactorial and that trade...

Innovation in Extraterrestrial Service Systems - A Challenge for Service Science

Science.gov (United States)

Bergner, David

2010-01-01

This presentation was prepared at the invitation of Professor Yukio Ohsawa, Department of Systems Innovation, School of Engineering, The University of Tokyo, for delivery at the International Workshop on Innovating Service Systems, sponsored by the Japanese Society of Artificial Intelligence (JSAI) as part of the JSAI Internation Symposium on AI, 2010. It offers several challenges for Service Science and Service Innovation. the goal of the presentation is to stimulate thinking about how service systems viII evolve in the future, as human society advances from its terrestrial base toward a permanent presence in space. First we will consider the complexity of the International Space Station (ISS) as it is today, with particular emphasis of its research facilities, and focus on a current challenge - to maximize the utilization of ISS research facilities for the benefit of society. After briefly reviewing the basic principles of Service Science, we will discuss the potential application of Service Innovation methodology to this challenge. Then we viII consider how game-changing technologies - in particular Synthetic Biology - could accelerate the pace of sociocultural evolution and consequently, the progression of human society into space. We will use this provocative vision to advance thinking about how the emerging field of Service Science, Management, and Engineering (SSME) might help us anticipate and better handle the challenges of this inevitable evolutionary process.

Ontology-based Semantic Search Engine for Healthcare Services

OpenAIRE

Jotsna Molly Rajan; M. Deepa Lakshmi

2012-01-01

With the development of Web Services, the retrieval of relevant services has become a challenge. The keyword-based discovery mechanism using UDDI and WSDL is insufficient due to the retrievalof a large amount of irrelevant information. Also, keywords are insufficient in expressing semantic concepts since a single concept can be referred using syntactically different terms. Hence, service capabilities need to be manually analyzed, which lead to the development of the Semantic Web for automatic...

Propagation engineering in radio links design

CERN Document Server

Ghasemi, Abdollah; Ghasemi, Farshid

2013-01-01

Propagation Engineering in Radio Link Design covers the basic principles of radiowaves propagation in a practical manner.  This fundamental understanding enables the readers to design radio links efficiently. This book elaborates on new achievements as well as recently developed propagation models.  This is in addition to a comprehensive overview of fundamentals of propagation in various scenarios. It examines theoretical calculations, approaches and applied procedures needed for radio links design. The authors study and analysis of the main propagation phenomena and its mechanisms based on the recommendations of International Telecommunications Union, (ITU). The book has been organized in 9 chapters and examines the role of antennas and passive reflectors in radio services, propagation mechanisms related to radar, satellite, short distance, broadcasting and trans-horizon radio links, with two chapters devoted to radio noise and main  parameters of radio link design. The book presents some 278 illustration...

40 CFR 86.536-78 - Engine starting and restarting.

Science.gov (United States)

2010-07-01

... equipped with automatic chokes shall be operated according to the instructions in the manufacturer's... transmission shall be placed in gear 15 seconds after the engine is started. If necessary, braking may be... starting procedure, the engine (automatic and manual choke engines) shall be started by opening the...

Management services

International Nuclear Information System (INIS)

Adkins, S.K.; Alford, D.R.; Barnette, A.B.

1979-01-01

The Management Services Section provides coordinated professional administrative services to the Fusion Energy Division (FED), allowing the work of technical professionals to be more fully concentrated in their areas of specialty. Services are provided in general administration, personnel, financial management, communications (including text and graphics generation), management information, library, safety, quality assurance, and nonprogrammatic engineering services. Highlights of the past year included adoption of the Procurement Module in the FED Management Information System (MIS) for use by the entire Laboratory, completion of the Personnel Module of the MIS, greatly increased personnel recruiting activity, and increased industrial subcontracting activity

Engineering Parameters in Bioreactor's Design: A Critical Aspect in Tissue Engineering

Science.gov (United States)

Amoabediny, Ghassem; Pouran, Behdad; Tabesh, Hadi; Shokrgozar, Mohammad Ali; Haghighipour, Nooshin; Khatibi, Nahid; Mottaghy, Khosrow; Zandieh-Doulabi, Behrouz

2013-01-01

Bioreactors are important inevitable part of any tissue engineering (TE) strategy as they aid the construction of three-dimensional functional tissues. Since the ultimate aim of a bioreactor is to create a biological product, the engineering parameters, for example, internal and external mass transfer, fluid velocity, shear stress, electrical current distribution, and so forth, are worth to be thoroughly investigated. The effects of such engineering parameters on biological cultures have been addressed in only a few preceding studies. Furthermore, it would be highly inefficient to determine the optimal engineering parameters by trial and error method. A solution is provided by emerging modeling and computational tools and by analyzing oxygen, carbon dioxide, and nutrient and metabolism waste material transports, which can simulate and predict the experimental results. Discovering the optimal engineering parameters is crucial not only to reduce the cost and time of experiments, but also to enhance efficacy and functionality of the tissue construct. This review intends to provide an inclusive package of the engineering parameters together with their calculation procedure in addition to the modeling techniques in TE bioreactors. PMID:24000327

Engineering parameters in bioreactor's design: a critical aspect in tissue engineering.

Science.gov (United States)

Salehi-Nik, Nasim; Amoabediny, Ghassem; Pouran, Behdad; Tabesh, Hadi; Shokrgozar, Mohammad Ali; Haghighipour, Nooshin; Khatibi, Nahid; Anisi, Fatemeh; Mottaghy, Khosrow; Zandieh-Doulabi, Behrouz

2013-01-01

Bioreactors are important inevitable part of any tissue engineering (TE) strategy as they aid the construction of three-dimensional functional tissues. Since the ultimate aim of a bioreactor is to create a biological product, the engineering parameters, for example, internal and external mass transfer, fluid velocity, shear stress, electrical current distribution, and so forth, are worth to be thoroughly investigated. The effects of such engineering parameters on biological cultures have been addressed in only a few preceding studies. Furthermore, it would be highly inefficient to determine the optimal engineering parameters by trial and error method. A solution is provided by emerging modeling and computational tools and by analyzing oxygen, carbon dioxide, and nutrient and metabolism waste material transports, which can simulate and predict the experimental results. Discovering the optimal engineering parameters is crucial not only to reduce the cost and time of experiments, but also to enhance efficacy and functionality of the tissue construct. This review intends to provide an inclusive package of the engineering parameters together with their calculation procedure in addition to the modeling techniques in TE bioreactors.

Enhancement of equipment services for Kozloduy NPP

International Nuclear Information System (INIS)

Schultz, Christophe

2013-01-01

Conclusion After 5 years of maintenance services, KNPP and AREVA have continuously intensified their partnership Close cooperation between KNPP, AREVA Local Office Engineers and OEM experts Involvement of sophisticated tools for diagnostics and condition monitoring Performance of engineering services and obsolescence evaluation Possibilities to perform equipment modernization of Electrical and IC equipment in future

National association of broadcasters engineering handbook NAB engineering handbook

CERN Document Server

Jones, Graham A; Osenkowsky, Thomas G; Williams, Edmund A

2013-01-01

The NAB Engineering Handbook provides detailed information on virtually every aspect of the broadcast chain, from news gathering, program production and postproduction through master control and distribution links to transmission, antennas, RF propagation, cable and satellite. Hot topics covered include HD Radio, HDTV, 2 GHz broadcast auxiliary services, EAS, workflow, metadata, digital asset management, advanced video and audio compression, audio and video over IP, and Internet broadcasting. A wide range of related topics that engineers and managers need to understand are also covered, includ

Public health engineering education in India: current scenario, opportunities and challenges.

Science.gov (United States)

Hussain, Mohammad Akhtar; Sharma, Kavya; Zodpey, Sanjay

2011-01-01

Public health engineering can play an important and significant role in solving environmental health issues. In order to confront public health challenges emerging out of environmental problems we need adequately trained public health engineers / environmental engineers. Considering the current burden of disease attributable to environmental factors and expansion in scope of applications of public health / environmental engineering science, it is essential to understand the present scenario of teaching, training and capacity building programs in these areas. Against this background the present research was carried out to know the current teaching and training programs in public health engineering and related disciplines in India and to understand the potential opportunities and challenges available. A systematic, predefined approach was used to collect and assemble the data related to various teaching and training programs in public health engineering / environmental engineering in India. Public health engineering / environmental engineering education and training in the country is mainly offered through engineering institutions, as pre-service and in-service training. Pre-service programs include diploma, degree (graduate) and post-graduate courses affiliated to various state technical boards, institutes and universities, whereas in-service training is mainly provided by Government of India recognized engineering and public health training institutes. Though trainees of these programs acquire skills related to engineering sciences, they significantly lack in public health skills. The teaching and training of public health engineering / environmental engineering is limited as a part of public health programs (MD Community Medicine, MPH, DPH) in India. There is need for developing teaching and training of public health engineering or environmental engineering as an interdisciplinary subject. Public health institutes can play an important and significant role in this

ARVIKA - Augmented Reality in Entwicklung, Produktion und Service: Anbindung eines mobilen Augmented Reality Systems an eine stationäre Infrastruktur. Schlussbericht

OpenAIRE

Wichert, R.; Balfanz, D.

2003-01-01

ARVIKA uses augmented reality (AR) technologies to research and create a user-oriented and system-driven support of operation procedures. It focuses on the development, production, and service of complex technical products and systems. Augmented-reality technologies improve working environments by merging real objects with computer-generated virtual objects to allow for detailed engineering and processing instructions. Augmented reality is a novel approach to the interaction between human and...

Expert system to produce a welding procedure specification

International Nuclear Information System (INIS)

Fukuda, S.; Morita, H.; Yamauchi, Y.; Tsuji, S.

1993-01-01

This paper describes the outline of the expert system for producing a welding procedure specification for a pressure vessel which has been developed in the 5 year project of Nagasaki Prefecture financially supported by MITI (Ministry of International Trade and Industry). The aim of this project is to reduce the burden of welding engineers because requirements are betting more and more severe and products are getting more and more complicated and diversified. In order to reduce the burden of a welding engineer, the Project has shown that the following facts must be taken into account in addition to the usual procedures of developing an expert system. The inference must be processed in accordance with the lines of reasoning of a welding engineer. It must be remembered that these lines differ from engineer to engineer. Thus, a very flexible inference mechanism is called for. The constraints are propagated in any direction. The mechanism to deal with this kind of constraint propagation is called for. The user wishes not only to follow the lines of reasoning but also to get the whole perspective during the reasoning process. The search space must be made visible to the user. Thus, the range must be clearly shown in the spreadsheet and in the graphics. And their correspondence must be established. Hierarchical inference mechanism is preferred

ENGINEERING OF UNIVERSITY INTELLIGENT LEARNING SYSTEMS

Directory of Open Access Journals (Sweden)

Vasiliy M. Trembach

2016-01-01

Full Text Available In the article issues of engineering intelligent tutoring systems of University with adaptation are considered. The article also dwells on some modern approaches to engineering of information systems. It shows the role of engineering e-learning devices (systems in system engineering. The article describes the basic principles of system engineering and these principles are expanded regarding to intelligent information systems. The structure of intelligent learning systems with adaptation of the individual learning environments based on services is represented in the article.

76 FR 64291 - Airworthiness Directives; General Electric Company (GE) Turbofan Engines

Science.gov (United States)

2011-10-18

... shop visit, but not later than 5,500 cycles-in-service (CIS) since the last engine shop visit where the... next engine shop visit, but not later than 5,500 cycles-in- service (CIS) since the last engine shop... than a ``CORRECT FLOW'' packing using paragraph 3.A.(1).(b) of the Accomplishment Instructions of SB No...

The end of meta search engines in Europe?

NARCIS (Netherlands)

Husovec, Martin

2015-01-01

The technology behind the meta search engines supports countless number of Internet services ranging from the price and quality comparison websites to more sophisticated traffic connection finders and general search engines like Google. Meta search engines generally increase market transparency,

Influencing Student Beliefs about the Role of the Civil Engineer in Society

Science.gov (United States)

Nesbit, Susan E.; Sianchuk, Robert; Aleksejuniene, Jolanta; Kindiak, Rebecca

2012-01-01

This study suggests that community service learning experiences facilitate the reconstruction of civil engineering student beliefs about both the type of work performed by civil engineers and the broad impact of civil engineering knowledge. Further, the service learning experiences highlight for students 1) the importance of relationships between…

DIC-CAM recipe for reverse engineering

Science.gov (United States)

Romero-Carrillo, P.; Lopez-Alba, E.; Dorado, R.; Diaz-Garrido, F. A.

2012-04-01

Reverse engineering (RE) tries to model and manufacture an object from measurements one of a reference object. Modern optical measurement systems and computer aided engineering software have improved reverse engineering procedures. We detail the main RE steps from 3D digitalization by Digital Image Correlation to manufacturing. The previous description is complemented with an application example, which portrays the performance of RE. The differences between original and manufactured objects are less than 2 mm (close to the tool radius).

7 CFR 1900.55 - Adverse action procedures.

Science.gov (United States)

2010-01-01

... 7 Agriculture 12 2010-01-01 2010-01-01 false Adverse action procedures. 1900.55 Section 1900.55 Agriculture Regulations of the Department of Agriculture (Continued) RURAL HOUSING SERVICE, RURAL BUSINESS... REGULATIONS GENERAL Adverse Decisions and Administrative Appeals § 1900.55 Adverse action procedures. (a) If...

40 CFR 86.136-90 - Engine starting and restarting.

Science.gov (United States)

2010-07-01

... automatic chokes shall be operated according to the manufacturer's operating instructions in the owner's...) The transmission shall be placed in gear 15 seconds after the engine is started. If necessary, braking... instructions in the owner's manual do not specify a warm engine starting procedure, the engine (automatic and...

An Engineering Research Program for High School Science Teachers: Year Two Changes and Results

Science.gov (United States)

DeJong, Brian P.; Yelamarthi, Kumar; Kaya, Tolga

2016-01-01

The research experiences for teachers program at Central Michigan University was initiated to team in-service and pre-service teachers with undergraduate engineering students and engineering faculty, in an engineering research setting. During the six-week program, teachers learn engineering concepts and develop high-school instructional material…

Web-based Analysis Services Report

CERN Document Server

AUTHOR|(CDS)2108758; Canali, Luca; Grancher, Eric; Lamanna, Massimo; McCance, Gavin; Mato Vila, Pere; Piparo, Danilo; Moscicki, Jakub; Pace, Alberto; Brito Da Rocha, Ricardo; Simko, Tibor; Smith, Tim; Tejedor Saavedra, Enric; CERN. Geneva. IT Department

2017-01-01

Web-based services (cloud services) is an important trend to innovate end-user services while optimising the service operational costs. CERN users are constantly proposing new approaches (inspired from services existing on the web, tools used in education or other science or based on their experience in using existing computing services). In addition, industry and open source communities have recently made available a large number of powerful and attractive tools and platforms that enable large scale data processing. “Big Data” software stacks notably provide solutions for scalable storage, distributed compute and data analysis engines, data streaming, web-based interfaces (notebooks). Some of those platforms and tools, typically available as open source products, are experiencing a very fast adoption in industry and science such that they are becoming “de facto” references in several areas of data engineering, data science and machine learning. In parallel to users' requests, WLCG is considering to c...

Developing, adopting and adapting operating procedures

International Nuclear Information System (INIS)

Rabouhams, J.

1986-01-01

This lecture specifies all the dispositions which have been taken by EDF Nuclear and Fossil Generation Department - according to the fact that availability and safety largely depend on the quality of the procedures and their easy handling - in order to develop, adopt and adapt the operating procedures. The following points are treated: General organization of procedures for plant operation during normal and abnormal conditions; Personnel and extend of responsibility involved into the development of procedures (research center, training center, specialized services, nuclear station, etc.); Validation of the procedures by means of full-scope simulators; Modifications of the procedures taking into account operation experience in material and human fields; Development of simulation softs in order to perform the procedures in abnormal situations; Evolution of operating technics and future skills. (orig.)

Role of support services in Jaduguda mine

International Nuclear Information System (INIS)

Roy, Pinaki; Bannerjee, S.N.; Srinivasan, M.N.; Radhakrishnan, V.N.; Khanwalkar, S.D.

1991-01-01

This paper highlights the role of the supporting services which are divided into two main groups. Group A consists of services rendered by survey, planning, geology and physics sub-groups. The survey sub-group enforces the directional controls of the various lay-outs, the underground geology sub-group establishes the parameters for the development of drives and stop blocks while the physics section supplies the data regarding grade and thickness and exercises the ore quality control. The techniques evolved in giving these supports to the production system is described. Diamond drilling of holes through rock formation have been successfully used for transporting stowing sand and for draining accumulated water in the levels to respective sumps besides its normal use for underground exploration. Group B consists of engineering services. With limited mining machinery in the early sixties, the mechanical engineering services have taken significant strides for servicing today's equipments consisting of drill jumbos, hydro-pneumatic trackless loaders. Alimak raises climbers, diesel locomotives and mechanised ore transfer systems besides servicing the vital area of modern koepe system of friction winding where Jaduguda has already been a fore-runner in the country. Electrical engineering services basically maintain the electrical systems and equipments both permanent and extensions as mining areas progress in depth. Indigenisation of imported equipments and spares for them and modernisation in certain key areas has been attempted successfully over the years. Civil engineering services are mostly confined to strengthening support system for mine tunnels and construction of ore transfer passes for stopping. (author). 3 figs

Talking about Customer Service.

Science.gov (United States)

Talley, Mary; Axelroth, Joan

2001-01-01

Discusses customer service in information centers and how to define it. Topics include the effects of competition, that give customers more choices; defining customers, and defining services; communications; physical environment; change, in customers and in technology; measuring customer service; and evaluating policies and procedures. (LRW)

Preoperational Subsurface Conditions at the Idaho Nuclear Technology and Engineering Center Service Wastewater Discharge Facility; TOPICAL

International Nuclear Information System (INIS)

Ansley, Shannon L.

2002-01-01

The Idaho Nuclear Technology and Engineering Center (INTEC) Service Wastewater Discharge Facility replaces the existing percolation ponds as a disposal facility for the INTEC Service Waste Stream. A preferred alternative for helping decrease water content in the subsurface near INTEC, closure of the existing ponds is required by the INTEC Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) Record of Decision (ROD) for Waste Area Group 3 Operable Unit 3-13 (DOE-ID 1999a). By August 2002, the replacement facility was constructed approximately 2 miles southwest of INTEC, near the Big Lost River channel. Because groundwater beneath the Idaho National Engineering and Environmental Laboratory (INEEL) is protected under Federal and State of Idaho regulations from degradation due to INEEL activities, preoperational data required by U.S. Department of Energy (DOE) Order 5400.1 were collected. These data include preexisting physical, chemical, and biological conditions that could be affected by the discharge; background levels of radioactive and chemical components; pertinent environmental and ecological parameters; and potential pathways for human exposure or environmental impact. This document presents specific data collected in support of DOE Order 5400.1, including: four quarters of groundwater sampling and analysis of chemical and radiological parameters; general facility description; site specific geology, stratigraphy, soils, and hydrology; perched water discussions; and general regulatory requirements. However, in order to avoid duplication of previous information, the reader is directed to other referenced publications for more detailed information. Documents that are not readily available are compiled in this publication as appendices. These documents include well and borehole completion reports, a perched water evaluation letter report, the draft INEEL Wellhead Protection Program Plan, and the Environmental Checklist

AUTOMOTIVE DIESEL MAINTENANCE L. UNIT XII, PART I--MAINTAINING THE FUEL SYSTEM (PART II), CUMMINS DIESEL ENGINE, PART II--UNIT INSTALLATION (ENGINE).

Science.gov (United States)

Human Engineering Inst., Cleveland, OH.

THIS MODULE OF A 30-MODULE COURSE IS DESIGNED TO DEVELOP AN UNDERSTANDING OF THE OPERATION AND MAINTENANCE OF THE DIESEL ENGINE FUEL SYSTEM AND THE PROCEDURES FOR DIESEL ENGINE INSTALLATION. TOPICS ARE FUEL FLOW CHARACTERISTICS, PTG FUEL PUMP, PREPARATION FOR INSTALLATION, AND INSTALLING ENGINE. THE MODULE CONSISTS OF A SELF-INSTRUCTIONAL BRANCH…

Analysis and optimization of blood-testing procedures.

NARCIS (Netherlands)

Bar-Lev, S.K.; Boxma, O.J.; Perry, D.; Vastazos, L.P.

2017-01-01

This paper is devoted to the performance analysis and optimization of blood testing procedures. We present a queueing model of two queues in series, representing the two stages of a blood-testing procedure. Service (testing) in stage 1 is performed in batches, whereas it is done individually in

23 CFR 650.411 - Procedures for bridge replacement and rehabilitation projects.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Procedures for bridge replacement and rehabilitation... ENGINEERING AND TRAFFIC OPERATIONS BRIDGES, STRUCTURES, AND HYDRAULICS Highway Bridge Replacement and Rehabilitation Program § 650.411 Procedures for bridge replacement and rehabilitation projects. (a) Consideration...

Exposure to electrocution by automotive ignition system in the work environment of car service employees

Directory of Open Access Journals (Sweden)

Bernard Fryśkowski

2014-06-01

Full Text Available Automotive ignition system diagnostic procedures involve a specific kind of action due to the presence of high voltage pulses rated of roughly several dozen kilovolts. Therefore, the repairers employed at car service coming into direct contact with electrical equipment of ignition systems are exposed to risk of electric shock. Typically, the electric discharge energy of automotive ignition systems is not high enough to cause fibrillation due to the electric effect on the heart. Nevertheless, there are drivers and car service employees who use electronic cardiac pacemakers susceptible to high voltage pulses. The influence of high-voltage ignition systems on the human body, especially in case of electric injury, has not been comprehensively elucidated. Therefore, relatively few scientific papers address this problem. The aim of this paper is to consider the electrical injury danger from automotive ignition systems, especially in people suffering from cardiac diseases. Some examples of the methods to reduce electric shock probability during diagnostic procedures of spark-ignition combustion engines are presented and discussed. Med Pr 2014;65(3:419–427

KEK Engineering Department -activity report FY 2003

International Nuclear Information System (INIS)

2005-03-01

This report includes all kinds of activities of the Engineering Department of KEK from 2002 to 2003 FY. There are fourteen chapters, which contain KEK Prize for engineering, KEK meeting of engineering technologies, Engineering Seminar, COACK (Component Oriented Advanced Control Kernel) for cooperation R and D project, Forum on engineering technologies from 1998 to 2003 FY, Engineering Department Symposium, service trainings, Engineering Department research study, English training, training for professional worker, training for technical expert, report on joint training for technical expert, training for middle school students, and the Engineering Department system and the main events from 1971 to 2003. (S.Y. )

23 CFR 630.1012 - Project-level procedures.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Project-level procedures. 630.1012 Section 630.1012 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC OPERATIONS... agencies/operators, transit providers, freight movers, utility suppliers, police, fire, emergency medical...

48 CFR 31.201-7 - Construction and architect-engineer contracts.

Science.gov (United States)

2010-10-01

...-engineer contracts. 31.201-7 Section 31.201-7 Federal Acquisition Regulations System FEDERAL ACQUISITION... Organizations 31.201-7 Construction and architect-engineer contracts. Specific principles and procedures for... architect-engineer contracts related to construction projects, are in 31.105. The applicability of these...

Requirements engineering: foundation for software quality

NARCIS (Netherlands)

Daneva, Maia; Pastor, Oscar

2016-01-01

Welcome to the proceedings of the 22nd edition of REFSQ: the International Working Conference on Requirements Engineering – Foundation for Software Quality! Requirements engineering (RE) has been recognized as a critical factor that impacts the quality of software, systems, and services. Since the

Feature-based engineering of compensations in web service environment

DEFF Research Database (Denmark)

Schaefer, Michael; Dolog, Peter

2009-01-01

In this paper, we introduce a product line approach for developing Web services with extended compensation capabilities. We adopt a feature modelling approach in order to describe variable and common compensation properties of Web service variants, as well as service consumer application...

40 CFR 90.1204 - Maintenance, aging and testing of engines.

Science.gov (United States)

2010-07-01

... engines. 90.1204 Section 90.1204 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... sample unless that engine experiences catastrophic mechanical failure or safety concerns requiring major... for engines with the amount of service and age of the test engine. (d) After aging each engine to at...

Engineering Parameters in Bioreactor’s Design: A Critical Aspect in Tissue Engineering

Directory of Open Access Journals (Sweden)

Nasim Salehi-Nik

2013-01-01

Full Text Available Bioreactors are important inevitable part of any tissue engineering (TE strategy as they aid the construction of three-dimensional functional tissues. Since the ultimate aim of a bioreactor is to create a biological product, the engineering parameters, for example, internal and external mass transfer, fluid velocity, shear stress, electrical current distribution, and so forth, are worth to be thoroughly investigated. The effects of such engineering parameters on biological cultures have been addressed in only a few preceding studies. Furthermore, it would be highly inefficient to determine the optimal engineering parameters by trial and error method. A solution is provided by emerging modeling and computational tools and by analyzing oxygen, carbon dioxide, and nutrient and metabolism waste material transports, which can simulate and predict the experimental results. Discovering the optimal engineering parameters is crucial not only to reduce the cost and time of experiments, but also to enhance efficacy and functionality of the tissue construct. This review intends to provide an inclusive package of the engineering parameters together with their calculation procedure in addition to the modeling techniques in TE bioreactors.

Blueprint template support for engineering cloud-based services

NARCIS (Netherlands)

Nguyen, D.K.; Lelli, F.; Taher, Y.; Parkin, M.S.; Papazoglou, M.; van den Heuvel, W.J.A.M.; Abramowicz, W.; Martín Llorente, I.; Surridge, M.; Zisman, A.; Vayssière, J.

2011-01-01

Current cloud-based service offerings are often provided as one-size-fits-all solutions and give little or no room for customization. This limits the ability for application developers to pick and choose offerings from multiple software, platform, infrastructure service providers and configure them

Foundations of Blueprint for Cloud-based Service Engineering

NARCIS (Netherlands)

Nguyen, D.K.

2011-01-01

Current cloud-based service offerings are often provided as one-size-fits-all solution and give little or no room for customization. This limits the ability for application developers to pick and choose offerings from multiple software, platform and infrastructure service providers and configure

Engineering change management report 2011

DEFF Research Database (Denmark)

Maier, Anja; Langer, Stefan

Changes or modifications have always been a fundamental part of product- and service design, yet they are often costly and potentially decrease overall development efficiency and effectiveness. How Danish manufacturing firms are able to improve engineering change management practice is a decisive......, challenges, and strategies for improved engineering change management of more than 90 engineering firms from different industry sectors and sizes in Denmark. In particular, the report presents an overview of current practice of engineering change management in Denmark, shows the extent to which engineering...... implementation, with software use in comparison being surprisingly low. The biggest problems listed range from engineering change process support to internal and external communication and the need for company-internal awareness and competence training for better engineering change management. The biggest need...

Engineering Task Plan for Preparing the Type 4 In Situ Vapor Samplers (ISVS) for Use

International Nuclear Information System (INIS)

BOGER, R.M.

2000-01-01

The DOE has identified a need to sample vapor space and exhaust ducts of several waste tanks The In-Situ Vapor Sampling (ISVS) Type IV vapor sampling cart has been identified as the appropriate monitoring tool. The ISVS carts have been out of service for a number of years. This ETP outlines the work to be performed to ready the type IV gas sampler for operation Characterization Engineering will evaluate the Type IV gas sampler carts to determine their state of readiness and will proceed to update procedures and equipment documentation to make the sampler operationally acceptable

Monitoring fuel consumption for reciprocating engines

International Nuclear Information System (INIS)

Zebelean, D.C.

1991-01-01

This paper reports that Northwest Pipeline Corp. has experienced substantial fuel cost savings through a program that provides continuous monitoring of predicted consumption against actual usage for reciprocating engines. With the continuous monitoring program, the company can gauge specific fuel consumption, flag inefficient engines and determine possible problems with computer software or hardware used to measure engine operations. The plan was initiated as part of an overall effort to reduce pipe line operating cost to remain market competitive by reducing cost of services to the customer. One of the factors in determining Northwest Pipeline's cost of service is the cost of fueling engines to transport natural gas. In 1990, Northwest consumed approximately 9,600,000 MMBtu in engine fuel. Fuel gas always has been accounted for and measured. However, the thermal efficiency of the fuel gas consumed was never quantified. Engineering management set a goal in 1989 to audit fuel consumption monthly on the basis of actual fuel consumed compared to the manufacturer's predicted consumption curves. The fuel consumption comparison between actual consumption with manufacturer's predicted consumption decreased 4% in six months after the first report was published. Unbalanced engines, faulty spark plugs, fuel valves, engines requiring overhauls, and even computer software and hardware problems were found, based on this report. Total decrease in the comparison of 4% was not all realized. Approximately 1.5% of the decrease was due to revising the manufacturer's fuel consumption curves to correctly predict Northwest's vintage of engine

Role of testing in requalifying Transamerica Delaval, Inc., engines for nuclear service

International Nuclear Information System (INIS)

Nesbitt, J.F.; Dingee, D.A.; Laity, W.W.

1985-03-01

This paper discusses the role of testing in requalifying Transamerica Delaval, Inc. (TDI) diesel generators for use as emergency standby power sources at nuclear power plants. ''Lead'' engine tests (to confirm the design adequacy of key engine components under conditions that could induce high-cycle fatigue) and ''following'' engine tests (for engines of the same model and equipped with the same components as the ''lead'' engine) have been conducted at several nuclear power plants. The tests conducted by Duke Power Company (Catawba Nuclear Station Unit 1) and Long Island Lighting Company (Shoreham Nuclear Power Station Unit 1) are discussed. 2 refs

Food Production, Management and Services: Service. Teacher Edition. Second Edition.

Science.gov (United States)

Palan, Earl

This food production, management, and services teacher guide contains nine units: (1) orientation; (2) types of service; (3) table settings; (4) dining room personnel; (5) dining room procedures; (6) side work; (7) guest/employee relationships; (8) sales techniques; and (9) safety and sanitation. Suggestions are included to increase reinforcement…

Environmental risk assessment for plant pests: a procedure to evaluate their impacts on ecosystem services.

Science.gov (United States)

Gilioli, G; Schrader, G; Baker, R H A; Ceglarska, E; Kertész, V K; Lövei, G; Navajas, M; Rossi, V; Tramontini, S; van Lenteren, J C

2014-01-15

The current methods to assess the environmental impacts of plant pests differ in their approaches and there is a lack of the standardized procedures necessary to provide accurate and consistent results, demonstrating the complexity of developing a commonly accepted scheme for this purpose. By including both the structural and functional components of the environment threatened by invasive alien species (IAS), in particular plant pests, we propose an environmental risk assessment scheme that addresses this complexity. Structural components are investigated by evaluating the impacts of the plant pest on genetic, species and landscape diversity. Functional components are evaluated by estimating how plant pests modify ecosystem services in order to determine the extent to which an IAS changes the functional traits that influence ecosystem services. A scenario study at a defined spatial and temporal resolution is then used to explore how an IAS, as an exogenous driving force, may trigger modifications in the target environment. The method presented here provides a standardized approach to generate comparable and reproducible results for environmental risk assessment as a component of Pest Risk Analysis. The method enables the assessment of overall environmental risk which integrates the impacts on different components of the environment and their probabilities of occurrence. The application of the proposed scheme is illustrated by evaluating the environmental impacts of the invasive citrus long-horn beetle, Anoplophora chinensis. © 2013.

The EBI search engine: EBI search as a service-making biological data accessible for all.

Science.gov (United States)

Park, Young M; Squizzato, Silvano; Buso, Nicola; Gur, Tamer; Lopez, Rodrigo

2017-07-03

We present an update of the EBI Search engine, an easy-to-use fast text search and indexing system with powerful data navigation and retrieval capabilities. The interconnectivity that exists between data resources at EMBL-EBI provides easy, quick and precise navigation and a better understanding of the relationship between different data types that include nucleotide and protein sequences, genes, gene products, proteins, protein domains, protein families, enzymes and macromolecular structures, as well as the life science literature. EBI Search provides a powerful RESTful API that enables its integration into third-party portals, thus providing 'Search as a Service' capabilities, which are the main topic of this article. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

40 CFR 90.114 - Requirement of certification-engine information label.

Science.gov (United States)

2010-07-01

... nomenclature and abbreviations provided in the Society of Automotive Engineers procedure J1930, “Electrical... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Requirement of certification-engine...) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM NONROAD SPARK-IGNITION ENGINES AT OR BELOW 19...

Creation of an emergency surgery service concentrates resident training in general surgical procedures.

Science.gov (United States)

Ahmed, Hesham M; Gale, Stephen C; Tinti, Meredith S; Shiroff, Adam M; Macias, Aitor C; Rhodes, Stancie C; Defreese, Marissa A; Gracias, Vicente H

2012-09-01

Emergency general surgery (EGS) is increasingly being provided by academic trauma surgeons in an acute care surgery model. Our tertiary care hospital recently changed from a model where all staff surgeons (private, subspecialty academic, and trauma academic) were assigned EGS call to one in which an emergency surgery service (ESS), staffed by academic trauma faculty, cares for all EGS patients. In the previous model, many surgeries were "not covered" by residents because of work-hour restrictions, conflicting needs, or private surgeon preference. The ESS was separate from the trauma service. We hypothesize that by creating a separate ESS, residents can accumulate needed and concentrated operative experience in a well-supervised academic environment. A prospectively accrued EGS database was retrospectively queried for the 18-month period: July 2010 to June 2011. The Accreditation Council for Graduate Medical Education (ACGME) databases were queried for operative numbers for our residency program and for national resident data for 2 years before and after creating the ESS. The ACGME operative requirements were tabulated from online sources. ACGME requirements were compared with surgical cases performed. During the 18-month period, 816 ESS operations were performed. Of these, 307 (38%) were laparoscopy. Laparoscopic cholecystectomy and appendectomy were most common (138 and 145, respectively) plus 24 additional laparoscopic surgeries. Each resident performed, on average, 34 basic laparoscopic cases during their 2-month rotation, which is 56% of their ACGME basic laparoscopic requirement. A diverse mixture of 70 other general surgical operations was recorded for the remaining 509 surgical cases, including reoperative surgery, complex laparoscopy, multispecialty procedures, and seldom-performed operations such as surgery for perforated ulcer disease. Before the ESS, the classes of 2008 and 2009 reported that only 48% and 50% of cases were performed at the main academic

EXPERIMENTAL DETERMINATION OF DOUBLE VIBE FUNCTION PARAMETERS IN DIESEL ENGINES WITH BIODIESEL

Directory of Open Access Journals (Sweden)

Radivoje B Pešić

2010-01-01

Full Text Available A zero-dimensional, one zone model of engine cycle for steady-state regimes of engines and a simplified procedure for indicator diagrams analysis have been developed at the Laboratory for internal combustion engines, fuels and lubricants of the Faculty of Mechanical Engineering in Kragujevac. In addition to experimental research, thermodynamic modeling of working process of diesel engine with direct injection has been presented in this paper. The simplified procedure for indicator diagrams analysis has been applied, also. The basic problem, a selection of shape parameters of double Vibe function used for modeling the engine operation process, has been solved. The influence of biodiesel fuel and engine working regimes on the start of combustion, combustion duration and shape parameter of double Vibe was determined by a least square fit of experimental heat release curve.

Home | Society of Women Engineers

Science.gov (United States)

Public Policy sweSwag History International Member Services Event Funding I AM WITH SWE Governance img a fellow woman engineer's growth and success. Donate Now img Join Join SWE Today! I AM WITH SWE When Engineers 05/07/18 Year of the Woman - Back to the Future in 2018? 04/27/18 SWE Magazine: Shaping Tomorrow's

A serviceability approach for carbon steel piping to intermittent high temperatures

International Nuclear Information System (INIS)

Ratiu, M.D.; Moisidis, N.T.

1996-01-01

Carbon steel piping (e.g., ASME SA-106, SA-53), is installed in many industrial applications (i.e. diesel generator at NPP) where the internal gas flow subjects the piping to successive short time exposures at elevated temperatures up to 1,100 F. A typical design of this piping without consideration for creep-fatigue cumulative damage is at least incomplete if not inappropriate. Also, a design for creep-fatigue, usually employed for long-term exposure to elevated temperatures, would be too conservative and will impose replacement of the carbon steel piping with heat-resistant CrMo steel piping. The existing ASME Standard procedures do not explicitly provide acceptance criteria for the design qualification to withstand these intermittent exposures to elevated temperatures. The serviceability qualification proposed is based on the evaluation of equivalent full temperature cycles which are presumed/expected to be experienced by the exhaust piping during the design operating life of the diesel engine. The proposed serviceability analysis consists of: (a) determination of the permissible stress at elevated temperatures, and (b) estimation of creep-fatigue damage for the total expected cycles of elevated temperature exposures following the procedure provided in ASME Code Cases N-253-6 and N-47-28

39 CFR 761.8 - Servicing book-entry Postal Service securities; payment of interest, payment at maturity or upon...

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Servicing book-entry Postal Service securities... POSTAL SERVICE POSTAL SERVICE DEBT OBLIGATIONS; DISBURSEMENT POSTAL MONEY ORDERS BOOK-ENTRY PROCEDURES § 761.8 Servicing book-entry Postal Service securities; payment of interest, payment at maturity or upon...

7 CFR 1210.325 - Procedure.

Science.gov (United States)

2010-01-01

... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE WATERMELON RESEARCH AND PROMOTION PLAN Watermelon Research and Promotion Plan National Watermelon Promotion Board § 1210.325 Procedure...

7 CFR 1780.54 - Technical services.

Science.gov (United States)