WorldWideScience

Sample records for prevalent thermal indices

  1. Comparison of UTCI to selected thermal indices

    Science.gov (United States)

    Blazejczyk, Krzysztof; Epstein, Yoram; Jendritzky, Gerd; Staiger, Henning; Tinz, Birger

    2012-05-01

    Over the past century more than 100 indices have been developed and used to assess bioclimatic conditions for human beings. The majority of these indices are used sporadically or for specific purposes. Some are based on generalized results of measurements (wind chill, cooling power, wet bulb temperature) and some on the empirically observed reactions of the human body to thermal stress (physiological strain, effective temperature). Those indices that are based on human heat balance considerations are referred to as "rational indices". Several simple human heat balance models are known and are used in research and practice. This paper presents a comparative analysis of the newly developed Universal Thermal Climate Index (UTCI), and some of the more prevalent thermal indices. The analysis is based on three groups of data: global data-set, synoptic datasets from Europe, and local scale data from special measurement campaigns of COST Action 730. We found the present indices to express bioclimatic conditions reasonably only under specific meteorological situations, while the UTCI represents specific climates, weather, and locations much better. Furthermore, similar to the human body, the UTCI is very sensitive to changes in ambient stimuli: temperature, solar radiation, wind and humidity. UTCI depicts temporal variability of thermal conditions better than other indices. The UTCI scale is able to express even slight differences in the intensity of meteorological stimuli.

  2. Prevalence of raised body mass indices and the association with ...

    African Journals Online (AJOL)

    2013-06-11

    Jun 11, 2013 ... prevalence rate from age < 20 to the age group 50-59 year-olds. High BP prevalence rates remained high when overweight and hyperglycaemia prevalence rates decreased from the age of 60. Prevalence rate relationships between age, obesity, total high BP and hyperglycaemia for females are indicated ...

  3. [Prevalence of asthma and determination of symptoms as risk indicators].

    Science.gov (United States)

    Mancilla-Hernández, Eleazar; Medina-Ávalos, Miguel Alejandro; Barnica-Alvarado, Raúl Humberto; Soto-Candia, Diego; Guerrero-Venegas, Rosario; Zecua-Nájera, Yahvéh

    2015-01-01

    Asthma is a chronic inflammatory airway disease whose prevalence has increased, especially in developed countries; the results of studies of asthma prevalence vary in different populations and even within the same country; in Mexico we observed fluctuations in prevalence of asthma from 7% to 33%. To determine the prevalence of asthma and severity of symptoms as risk indicators in school population in cities in various states of Mexico. A descriptive study of detection of asthma prevalence and analytical-comparative observational study of determination of symptoms of asthma. The surveys were applied to preschool, elementary, middle and high school population, in the cities of Puebla, Puebla; Tulancingo, Hidalgo; Tlaxcala, Tlaxcala, and Cancún, Quintana Roo; new validated questionnaire was used as instrument: Asthma Diagnostic Questionnaire for Epidemiologic Studies, consisting of eight questions with summation value for diagnosis. 8,754 surveys showed a 14% prevalence in Puebla, 17% in Tulancingo, 7% in Tlaxcala, and 14% in Cancún; average in four cities surveyed was 13%; the strength of association with asthma symptoms in descending order with significant odds ratio were: recurrent wheezing, breathlessness, chest tightness, recurrent cough, cough cold, recurrent cold symptoms, predominantly nocturnal cough, cough that increases with exercise. The average prevalence of asthma in the surveyed cities was 13% and the main symptoms indicators of risk of asthma in school children were: recurrent wheezing, breathlessness, chest tightness and recurrent cough.

  4. Prevalence of metabolic syndrome using weight and weight indices ...

    African Journals Online (AJOL)

    McRoy

    Prevalence of metabolic syndrome using weight and weight indices in an apparently healthy Nigerian ... ABSTRACT. Background: Notions about the metabolic syndrome (MS) emphasized the importance of obesity. This may ..... from The Third National Health and Nutrition Examination. Survey. Archives of Internal Medicine ...

  5. Prevalence, Indications, Levels and Outcome Limb amputations at ...

    African Journals Online (AJOL)

    Prevalence, Indications, Levels and Outcome Limb amputations at University Teaching Hospital-Butare in Rwanda. ... Results: Out of 3466 operated cases in Surgery Department, there were 107 limb amputations accounting for 3.08% of all operations performed during the study period. Females accounted for 29.9% cases.

  6. A comprehensive catalogue and classification of human thermal climate indices

    Science.gov (United States)

    de Freitas, C. R.; Grigorieva, E. A.

    2015-01-01

    The very large number of human thermal climate indices that have been proposed over the past 100 years or so is a manifestation of the perceived importance within the scientific community of the thermal environment and the desire to quantify it. Schemes used differ in approach according to the number of variables taken into account, the rationale employed, the relative sophistication of the underlying body-atmosphere heat exchange theory and the particular design for application. They also vary considerably in type and quality, as well as in several other aspects. Reviews appear in the literature, but they cover a limited number of indices. A project that produces a comprehensive documentation, classification and overall evaluation of the full range of existing human thermal climate indices has never been attempted. This paper deals with documentation and classification. A subsequent report will focus on evaluation. Here a comprehensive register of 162 thermal indices is assembled and a sorting scheme devised that groups them according to eight primary classification classes. It is the first stage in a project to organise and evaluate the full range of all human thermal climate indices. The work, when completed, will make it easier for users to reflect on the merits of all available thermal indices. It will be simpler to locate and compare indices and decide which is most appropriate for a particular application or investigation.

  7. Lipid biomarkers in Symbiodinium dinoflagellates: new indicators of thermal stress

    KAUST Repository

    Kneeland, J.

    2013-08-30

    Lipid content and fatty acid profiles of corals and their dinoflagellate endosymbionts are known to vary in response to high-temperature stress. To better understand the heat-stress response in these symbionts, we investigated cultures of Symbiodinium goreauii type C1 and Symbiodinium sp. clade subtype D1 grown under a range of temperatures and durations. The predominant lipids produced by Symbiodinium are palmitic (C16) and stearic (C18) saturated fatty acids and their unsaturated analogs, the polyunsaturated fatty acid docosahexaenoic acid (C22:6, n-3; DHA), and a variety of sterols. Prolonged exposure to high temperature causes the relative amount of unsaturated acids within the C18 fatty acids in Symbiodinium tissue to decrease. Thermal stress also causes a decrease in abundance of fatty acids relative to sterols, as well as the more specific ratio of DHA to an algal 4-methyl sterol. These shifts in fatty acid unsaturation and fatty acid-to-sterol ratios are common to both types C1 and D1, but the apparent thermal threshold of lipid changes is lower for type C1. This work indicates that ratios among free fatty acids and sterols in Symbiodinium can be used as sensitive indicators of thermal stress. If the Symbiodinium lipid stress response is unchanged in hospite, the algal heat-stress biomarkers we have identified could be measured to detect thermal stress within the coral holobiont. These results provide new insights into the potential role of lipids in the overall Symbiodinium thermal stress response. © 2013 Springer-Verlag Berlin Heidelberg.

  8. Thermal environment assessment reliability using temperature--humidity indices.

    Science.gov (United States)

    d'Ambrosio Alfano, Francesca Romana; Palella, Boris Igor; Riccio, Giuseppe

    2011-01-01

    A reliable assessment of the thermal environment should take into account the whole of the six parameters affecting the thermal sensation (air temperature, air velocity, humidity, mean radiant temperature, metabolic rate and thermo-physical properties of clothing). Anyway, the need of a quick evaluation based on few measurements and calculations has leaded to like best temperature-humidity indices instead of rational methods based on the heat balance on the human body. Among these, Canadian Humidex, preliminarily used only for weather forecasts, is becoming more and more widespread for a generalized assessment of both outdoor and indoor thermal environments. This custom arouses great controversies since using an index validated in outdoor conditions does not assure its indoor reliability. Moreover is it really possible to carry out the thermal environment assessment ignoring some of variables involved in the physiological response of the human body? Aiming to give a clear answer to these questions, this paper deals with a comparison between the assessment carried out according to the rational methods suggested by International Standards in force and the Humidex index. This combined analysis under hot stress situations (indoor and outdoor) has been preliminarily carried out; in a second phase the study deals with the indoor comfort prediction. Obtained results show that Humidex index very often leads to the underestimation of the workplace dangerousness and a poor reliability of comfort prediction when it is used in indoor situations.

  9. How reliable are geometry-based building indices as thermal performance indicators?

    International Nuclear Information System (INIS)

    Rodrigues, Eugénio; Amaral, Ana Rita; Gaspar, Adélio Rodrigues; Gomes, Álvaro

    2015-01-01

    Highlights: • Geometry-based building indices are tested in different European climate regions. • Building design programs are used to randomly generate sets of simulation models. • Some indices correlate in specific climates and design programs. • Shape-based Relative Compactness presented the best correlation of all indices. • Window-to-Surface Ratio was the window-based index with best correlation. - Abstract: Architects and urban planners have been relying on geometry-based indices to design more energy efficient buildings for years. The advantage of such indices is their ease of use and capability to capture the relation of a few geometric variables with the building’s performance. However, such relation is usually found using only a few simple building models and considering only a few climate regions. This paper presents the analysis of six geometry-based building indices to determine their adequacy in eight different climate regions in Europe. For each location, three residential building design programs were used as building specifications. Two algorithms were employed to randomly generate and assess the thermal performance of three sets of 500 alternative building models. The results show that geometry-based indices only correlate with the buildings’ thermal performance according to specific climate regions and building design programs

  10. The Prevalence of Obesity as Indicated by BMI and Waist ...

    African Journals Online (AJOL)

    Background: The prevalence of overweight and obesity in most developed countries and in urban areas of many less developed countries has been increasing markedly over the past twenty years. This study\\'s aims were to determine the prevalence of obesity using BMI and waist circumference among Nigerian adults ...

  11. Prevalence and hematological indices of pigs naturally infested with ...

    African Journals Online (AJOL)

    Prevalence and hematological studies of pigs naturally infested with mange in the Federal University of Technology Owerri, Nigeria piggery farm was investigated. Out of 66 pigs in the farm, 33(50%) of them were of Large White breed, 28(42.4%) Indigenous and 5(7.6%) crossbred respectively. Of these breeds of pigs, ...

  12. Local thermal energy as a structural indicator in glasses.

    Science.gov (United States)

    Zylberg, Jacques; Lerner, Edan; Bar-Sinai, Yohai; Bouchbinder, Eran

    2017-07-11

    Identifying heterogeneous structures in glasses-such as localized soft spots-and understanding structure-dynamics relations in these systems remain major scientific challenges. Here, we derive an exact expression for the local thermal energy of interacting particles (the mean local potential energy change caused by thermal fluctuations) in glassy systems by a systematic low-temperature expansion. We show that the local thermal energy can attain anomalously large values, inversely related to the degree of softness of localized structures in a glass, determined by a coupling between internal stresses-an intrinsic signature of glassy frustration-anharmonicity and low-frequency vibrational modes. These anomalously large values follow a fat-tailed distribution, with a universal exponent related to the recently observed universal [Formula: see text] density of states of quasilocalized low-frequency vibrational modes. When the spatial thermal energy field-a "softness field"-is considered, this power law tail manifests itself by highly localized spots, which are significantly softer than their surroundings. These soft spots are shown to be susceptible to plastic rearrangements under external driving forces, having predictive powers that surpass those of the normal modes-based approach. These results offer a general, system/model-independent, physical/observable-based approach to identify structural properties of quiescent glasses and relate them to glassy dynamics.

  13. Local thermal energy as a structural indicator in glasses

    Science.gov (United States)

    Zylberg, Jacques; Lerner, Edan; Bar-Sinai, Yohai; Bouchbinder, Eran

    2017-07-01

    Identifying heterogeneous structures in glasses—such as localized soft spots—and understanding structure-dynamics relations in these systems remain major scientific challenges. Here, we derive an exact expression for the local thermal energy of interacting particles (the mean local potential energy change caused by thermal fluctuations) in glassy systems by a systematic low-temperature expansion. We show that the local thermal energy can attain anomalously large values, inversely related to the degree of softness of localized structures in a glass, determined by a coupling between internal stresses—an intrinsic signature of glassy frustration—anharmonicity and low-frequency vibrational modes. These anomalously large values follow a fat-tailed distribution, with a universal exponent related to the recently observed universal ω4ω4 density of states of quasilocalized low-frequency vibrational modes. When the spatial thermal energy field—a “softness field”—is considered, this power law tail manifests itself by highly localized spots, which are significantly softer than their surroundings. These soft spots are shown to be susceptible to plastic rearrangements under external driving forces, having predictive powers that surpass those of the normal modes-based approach. These results offer a general, system/model-independent, physical/observable-based approach to identify structural properties of quiescent glasses and relate them to glassy dynamics.

  14. Prevalence of Overweight and Obesity among Chinese Adults: Role of Adiposity Indicators and Age.

    Science.gov (United States)

    Xu, Weili; Zhang, Hua; Paillard-Borg, Stephanie; Zhu, Hong; Qi, Xiuying; Rizzuto, Debora

    2016-01-01

    The role of different body fat indicators and age in assessing the prevalence of obesity is unclear. We aimed to examine to what extent different body fat indicators including BMI, waist circumference (WC) and waist-to-hip ratio (WHR) affect the prevalence of overweight and obesity among Chinese adults taking age into account. This population-based cross-sectional study included a random sample of 7,603 adults aged 20-79 years across entire Tianjin, China. BMI, WC, and WHR were used to define overweight and obesity following standard criteria. Prevalence rates were calculated and standardized using local age- and gender-specific census data. Logistic regression was used in data analysis. Using the combination of BMI, WC, and WHR, the prevalence of overweight and obesity was 69.8%, and increased with age till the age of 60 and a decline thereafter. The prevalence of overweight assessed by BMI was higher than that assessed by WC and WHR, while the prevalence of obesity defined by BMI was much lower than that defined by WC or WHR. The prevalence of overweight and obesity is about 70% among Chinese adults. Adiposity indicators and age play an important role in the prevalence of overweight and obesity. © 2016 S. Karger GmbH, Freiburg.

  15. Epithermal and Thermal Spectrum Indices in Heavy Water Lattices

    International Nuclear Information System (INIS)

    Sokolowski, E.K.; Jonsson, A.

    1967-05-01

    Spectral indices have been measured by foil activation technique in a number of different D 2 O-moderated lattices in the Swedish zero power reactor R0 and the pressurized exponential assembly TZ. In most cases the fuel was in the form of single rods, distributed uniformly in the lattice. Parameters in these cases were lattice pitch and fuel composition. A 31-rod cluster lattice was also investigated, with the moderator temperature varying up to 210 deg C. On the basis of these measurements, as well as measurements on cluster lattices, reported by other investigators, it has been possible to derive simple correlations for the spectral indices, which seem to be of fairly general validity for D 2 O lattices. The experimental results have also been compared to calculations with the multigroup collision probability program FLEF

  16. Estimating Prevalence of Coronary Heart Disease for Small Areas Using Collateral Indicators of Morbidity

    Directory of Open Access Journals (Sweden)

    Peter Congdon

    2010-01-01

    Full Text Available Different indicators of morbidity for chronic disease may not necessarily be available at a disaggregated spatial scale (e.g., for small areas with populations under 10 thousand. Instead certain indicators may only be available at a more highly aggregated spatial scale; for example, deaths may be recorded for small areas, but disease prevalence only at a considerably higher spatial scale. Nevertheless prevalence estimates at small area level are important for assessing health need. An instance is provided by England where deaths and hospital admissions for coronary heart disease are available for small areas known as wards, but prevalence is only available for relatively large health authority areas. To estimate CHD prevalence at small area level in such a situation, a shared random effect method is proposed that pools information regarding spatial morbidity contrasts over different indicators (deaths, hospitalizations, prevalence. The shared random effect approach also incorporates differences between small areas in known risk factors (e.g., income, ethnic structure. A Poisson-multinomial equivalence may be used to ensure small area prevalence estimates sum to the known higher area total. An illustration is provided by data for London using hospital admissions and CHD deaths at ward level, together with CHD prevalence totals for considerably larger local health authority areas. The shared random effect involved a spatially correlated common factor, that accounts for clustering in latent risk factors, and also provides a summary measure of small area CHD morbidity.

  17. Spatially Interpolated Disease Prevalence Estimation Using Collateral Indicators of Morbidity and Ecological Risk

    Directory of Open Access Journals (Sweden)

    Peter Congdon

    2013-10-01

    Full Text Available This paper considers estimation of disease prevalence for small areas (neighbourhoods when the available observations on prevalence are for an alternative partition of a region, such as service areas. Interpolation to neighbourhoods uses a kernel method extended to take account of two types of collateral information. The first is morbidity and service use data, such as hospital admissions, observed for neighbourhoods. Variations in morbidity and service use are expected to reflect prevalence. The second type of collateral information is ecological risk factors (e.g., pollution indices that are expected to explain variability in prevalence in service areas, but are typically observed only for neighbourhoods. An application involves estimating neighbourhood asthma prevalence in a London health region involving 562 neighbourhoods and 189 service (primary care areas.

  18. Spatially interpolated disease prevalence estimation using collateral indicators of morbidity and ecological risk.

    Science.gov (United States)

    Congdon, Peter

    2013-10-14

    This paper considers estimation of disease prevalence for small areas (neighbourhoods) when the available observations on prevalence are for an alternative partition of a region, such as service areas. Interpolation to neighbourhoods uses a kernel method extended to take account of two types of collateral information. The first is morbidity and service use data, such as hospital admissions, observed for neighbourhoods. Variations in morbidity and service use are expected to reflect prevalence. The second type of collateral information is ecological risk factors (e.g., pollution indices) that are expected to explain variability in prevalence in service areas, but are typically observed only for neighbourhoods. An application involves estimating neighbourhood asthma prevalence in a London health region involving 562 neighbourhoods and 189 service (primary care) areas.

  19. Prevalence and risk indicators of depression in elderly nursing home patients : the AGED study

    NARCIS (Netherlands)

    Jongenelis, K; Eisses, AMH; Beekman, ATF; Kluiter, H; Ribbe, MW

    2004-01-01

    Background: Depression is a common and disabling psychiatric disorder in later life. Particular frail nursing home patients seem to be at increased risk. Nursing home-based studies on risk indicators of depression are scarce. Methods: Prevalence and risk indicators of depression were assessed in 333

  20. Energy indicators impact in multi-criteria sustainability analyse of thermal power plant unit

    OpenAIRE

    Škobalj Predrag D.; Kijevčanin Mirjana Lj.; Jovanović Marina P.; Afgan Naim H.; Erić Milić D.

    2017-01-01

    This paper presents method for sustainability assessment of thermal power plant unit using multi-criteria analysis with aim to create base for business decision. Seven options of possible status of thermal power plant „Kolubara A” unit No. 2 with energy indicators of sustainable development were shown. Energy indicators of sustainable development consists of sets of resource preservation, economic, environmental, and social indicators. Sustainability assessment often fails to account for soci...

  1. 76 FR 81363 - Temperature-Indicating Devices; Thermally Processed Low-Acid Foods Packaged in Hermetically...

    Science.gov (United States)

    2011-12-28

    ... amended FDA's regulations for thermally processed low-acid foods packaged in hermetically sealed... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration 21 CFR Part 113 [Docket No. FDA-2007-N-0265] (formerly 2007N-0026) Temperature-Indicating Devices; Thermally Processed Low-Acid...

  2. Body image perception in women: prevalence and association with anthropometric indicators.

    Directory of Open Access Journals (Sweden)

    Andreia Pelegrini

    2013-12-01

    Full Text Available DOI: http://dx.doi.org/10.5007/1980-0037.2014v16n1p58 The aim of this study was to investigate the prevalence of body image perception and its association with anthropometric indicators (body mass index, waist circumference, waist-height ratio, and conicity index in women undergoing cervical cancer screening at an institution in Florianópolis, Santa Catarina. The study included 736 women (≥ 18 years. Anthropometric variables (weight, height, waist circumference were collected for the determination of body mass index, waist-height ratio, and conicity index. Body image perception was evaluated using a nine-body silhouette scale. The prevalence of body image dissatisfaction was 73% (dissatisfaction due to excess weight = 67.4%; dissatisfaction due to thinness = 5.6%. Overweight women (PR=1.34; 95%CI=1.23-2.49, p<0.001 and women with an inadequate conicity index (PR=1.12; 95%CI =1.02-1.24, p=0.016 presented a higher prevalence of body image dissatisfaction. The prevalence of body image dissatisfaction is high and the proportion of inadequate anthropometric indicators requires attention. Moreover, body dissatisfaction was more prevalent among overweight women and women with an inadequate conicity index. These results indicate the need for interventions and for the implementation of programs designed to control body weight and to reduce cardiovascular risk factors and body image dissatisfaction in women attending primary health care centers, such as cancer screening services.

  3. High prevalence of biofilm synergy among bacterial soil isolates in cocultures indicates bacterial interspecific cooperation

    DEFF Research Database (Denmark)

    Ren, Dawei; Madsen, Jonas Stenløkke; Sørensen, Søren Johannes

    2015-01-01

    of single-species biofilms, indicating that all the individual strains benefit from inclusion in the multispecies community. Our results show a high prevalence of synergy in biofilm formation in multispecies consortia isolated from a natural bacterial habitat and suggest that interspecific cooperation...

  4. A comparison and appraisal of a comprehensive range of human thermal climate indices.

    Science.gov (United States)

    de Freitas, C R; Grigorieva, E A

    2017-03-01

    Numerous human thermal climate indices have been proposed. It is a manifestation of the perceived importance of the thermal environment within the scientific community and a desire to quantify it. Schemes used differ in approach according to the number of variables taken into account, the rationale employed, and the particular design for application. They also vary considerably in type and quality, method used to express output, as well as in several other aspects. In light of this, a three-stage project was undertaken to deliver a comprehensive documentation, classification, and overall evaluation of the full range of existing human thermal climate indices. The first stage of the project produced a comprehensive register of as many thermal indices as could be found, 165 in all. The second stage devised a sorting scheme of these human thermal climate indices that grouped them according to eight primary classification categories. This, the third stage of the project, evaluates the indices. Six evaluation criteria, namely validity, usability, transparency, sophistication, completeness, and scope, are used collectively as evaluation criteria to rate each index scheme. The evaluation criteria are used to assign a score that varies between 1 and 5, 5 being the highest. The indices with the highest in each of the eight primary classification categories are discussed. The work is the final stage of a study of the all human thermal climatic indices that could be found in literature. Others have considered the topic, but this study is the first detailed, genuinely comprehensive, and systematic comparison. The results make it simpler to locate and compare indices. It is now easier for users to reflect on the merits of all available thermal indices and decide which is most suitable for a particular application or investigation.

  5. Thermal Perception in the Mediterranean Area: Comparing the Mediterranean Outdoor Comfort Index (MOCI to Other Outdoor Thermal Comfort Indices

    Directory of Open Access Journals (Sweden)

    Iacopo Golasi

    2016-07-01

    Full Text Available Outdoor thermal comfort is an essential factor of people’s everyday life and deeply affects the habitability of outdoor spaces. However the indices used for its evaluation were usually developed for indoor environments assuming still air conditions and absence of solar radiation and were only later adapted to outdoor spaces. For this reason, in a previous study the Mediterranean Outdoor Comfort Index (MOCI was developed, which is an empirical index able to estimate the thermal perception of people living in the Mediterranean area. In this study it was compared numerically (by using the data obtained through a field survey with other selected thermal indices. This comparison, performed in terms of Spearman’s rho correlation coefficient, association Gamma, percentage of correct predictions and cross-tabulation analysis, led to identify the MOCI as the most suitable index to examine outdoor thermal comfort in the interested area. As a matter of fact it showed a total percentage of correct predictions of 35.5%. Good performances were reported even in thermophysiological indices as the Physiological Equivalent Temperature (PET and Predicted Mean Vote (PMV. Moreover it was revealed that adaptation and acclimatization phenomena tend to have a certain influence as well.

  6. Constraining the thermal history of the North American Midcontinent Rift System using carbonate clumped isotopes and organic thermal maturity indices

    Science.gov (United States)

    Gallagher, Timothy M.; Sheldon, Nathan D.; Mauk, Jeffrey L.; Petersen, Sierra V.; Gueneli, Nur; Brocks, Jochen J.

    2017-01-01

    The Midcontinent Rift System (MRS) is a Late Mesoproterozoic (∼1.1 Ga) sequence of volcanic and sedimentary rocks exposed in the Lake Superior Region of North America. The MRS continues to be the focus of much research due to its economic mineral deposits as well as its archive of Precambrian life and tectonic processes. In order to constrain the post-depositional thermal history of the MRS, samples were analyzed for carbonate clumped isotope composition and organic thermal maturity. Clumped isotope values from sedimentary/early-diagenetic samples were partially reset during burial to temperatures between 68 and 75 °C. Solid-state reordering models indicate that maximum burial temperatures of 125–155 °C would reset the clumped isotope values to the observed temperature range prior to the onset of regional cooling and uplift. Clumped isotope results from late-stage veins in the White Pine Mine encompass a greater temperature range (49–116 °C), indicative of spatially variable hydrothermal activity and vein emplacement after burial temperatures fell below 100 °C during regional cooling and uplift. Clumped isotope and organic thermal maturity data do not indicate significant spatial differences in thermal history along the MRS. Observed variability in bulk organic matter composition and biomarker indices are therefore more likely a result of shifts in primary productivity or early-degradation processes. These results demonstrate that the MRS experienced a spatially consistent, relatively mild thermal history (125–155 °C) and is therefore a valuable archive for understanding the Late Mesoproterozoic environment.

  7. Prevalence and risk indicators for attachment loss in an urban population of South India.

    Science.gov (United States)

    Rao, Suresh Ranga; Thanikachalam, S; Sathiyasekaran, B W C S; Vamsi, Lavu; Balaji, Thodur Madapusi; Jagannathan, Raghunathan

    2014-03-01

    To estimate the prevalence and severity of attachment loss in an urban population of South India and to determine related risk indicators. This population based cross sectional study used a subset of data from a large survey representative of urban population from Chennai city. The sample consisted of 900 subjects in the age range of 17 years to 87 years. Participants were interviewed using a structured proforma and subjected to a full mouth clinical examination of six sites per tooth. The prevalence of clinical attachment level (CAL) and association with various risk indicators was assessed. Out of the 900 subjects examined, 868 (96.4%) had CAL <5 mm and 32 (3.6%) had CAL ≥ 5 mm. Age, smoking, poor oral hygiene were found to be independent risk indicators for CAL (p<0.05). Smoking (pack years) was found to exhibit a dose response effect with CAL (Kendall's Tau coefficient = 0.098) (p<0.05). In this urban population, a low prevalence of CAL ≥ 5 mm was observed. Amongst the risk indicators evaluated, age, smoking and poor oral hygiene contribute significantly to attachment loss.

  8. Cross-sectional study on the prevalence and risk indicators of peri-implant diseases.

    Science.gov (United States)

    Konstantinidis, Ioannis K; Kotsakis, Georgios A; Gerdes, Sebastian; Walter, Michael Horst

    2015-01-01

    To evaluate the prevalence of peri-implant diseases in a university patient sample and to analyse possible risk variables associated with their occurrence. One hundred and eighty-six patients with 597 implants were examined clinically and radiographically. The mean period of function was 5.5 years (range 1 to 16.5 years). A subgroup analysis was performed for implants with a minimum function time of 5 years. Outcome measures were implant failures, prevalence and risk indicators of peri-implant diseases. In order to identify statistically significant risk indicators of peri-implant mucositis and peri-implantitis multi-level logistic regression models were constructed. The prevalence of peri-implantitis and peri-implant mucositis on patient levels were 12.9% (13.3% for ≥ 5 years) and 64.5% (64.4% for ≥ 5 years), respectively. Multi-level analysis showed that a high plaque score (OR = 1.365; 95% CI: 1.18 to 1.57, P history of periodontal disease was the most significant risk indicator for peri-implantitis and the level of oral hygiene was significantly associated with peri-implant mucositis.

  9. Prevalence

    Directory of Open Access Journals (Sweden)

    Mohammed Al-Darwish

    2014-07-01

    Conclusion: Results indicated that dental caries prevalence among school children in Qatar has reached critical levels, and is influenced by socio-demographic factors. The mean decayed, missing, and filled teeth values obtained in this study were the second highest detected in the Eastern Mediterranean region.

  10. INDICATION OF CARIES FREE PREVALENCE AMONG 12 YEARS OLD STUDENTS IN IZEH CITY

    Directory of Open Access Journals (Sweden)

    M MOUSAVINASAB

    2003-09-01

    Full Text Available Introduction: Caries is a factor of teeth missing and its prevalence and also its expenditure are very light in Iran. Treatment ways need a lot of time, but they have little success, so it is important to prevent caries. Now if we want to have a successful model, having person's statistics is important and useful for our Research purposes. This research was done to detect caries free prevalence in students twelve year of age in Izeh city and it contained 2groups of girls and boys. It was done to indicate the connection between caries free prevalence and individual oral hygiene with brushing times, numbers during 24 hours. Methods: This research is a kind of epidemiological and descriptive study. It was done in Izeh city in 78-79 educational years. Its only document, was selection the 12 years old students. Informations collected by clinical inspections and interrogatory J method Sample volume was 400 students according to this formula N=Z2(1-p/ d2. We use Chi-square statistics test and also its soft disk (SPSS or statitistics program was about social science. Conclusion: Caries free prevalence within the whole sample was 16.5%and it was 17.5% within the girls and 15-5% within boys. According to brushing times numbers, 25% brushed once a day, 47% brushed twice and 5.5% brushed three time a day and 22.5% never brushed their teeth. Discussin and conclusion: According to the obtained dates, caries prevalence related to sex difference was meaningless and they had no connection with each other there was a meaningful connection between brushing times, numbers and oral hygiene situation which caries free developed by increasing anyone of them.

  11. Mucosal prevalence and interactions with the epithelium indicate commensalism of Sutterella spp.

    Directory of Open Access Journals (Sweden)

    Kaisa Hiippala

    2016-10-01

    Full Text Available Sutterella species have been frequently associated with human diseases, such as autism, Down syndrome and inflammatory bowel disease (IBD, but the impact of these bacteria on health still remains unclear. Especially the interactions of Sutterella spp. with the host are largely unknown, despite of the species being highly prevalent. In this study, we addressed the interaction of three known species of Sutterella with the intestinal epithelium and examined their adhesion properties, the effect on intestinal barrier function and the pro-inflammatory capacity in vitro. We also studied the relative abundance and prevalence of the genus Sutterella and S. wadsworthensis in intestinal biopsies of healthy individuals and patients with celiac disease (CeD or IBD. Our results show that Sutterella spp. are abundant in the duodenum of healthy adults with a decreasing gradient towards the colon. No difference was detected in the prevalence of Sutterella between the pediatric IBD or CeD patients and the healthy controls. Sutterella parvirubra adhered better than the two other Sutterella spp. to differentiated Caco-2 cells and was capable of decreasing the adherence of S. wadsworthensis, which preferably bound to mucus and human extracellular matrix (ECM proteins. Furthermore, only S. wadsworthensis induced an interleukin-8 (IL-8 production in enterocytes, which could be due to different lipopolysaccharide (LPS structures between the species. However, its pro-inflammatory activity was modest as compared to non-pathogenic Escherichia coli. Sutterella spp. had no effect on the enterocyte monolayer integrity in vitro. Our findings indicate that the members of genus Sutterella are widely prevalent commensals with mild pro-inflammatory capacity in the human gastrointestinal tract and do not contribute significantly to the disrupted epithelial homeostasis associated with microbiota dysbiosis and increase of Proteobacteria. The ability of Sutterella spp. to adhere to

  12. Exploring changes in open defecation prevalence in sub-Saharan Africa based on national level indices.

    Science.gov (United States)

    Galan, Deise I; Kim, Seung-Sup; Graham, Jay P

    2013-05-30

    In sub-Saharan Africa, it is estimated that 215 million people continue to engage in open defecation. This practice facilitates the transmission of diarrheal diseases - one of the leading causes of mortality in children under 5 in sub-Saharan Africa. The main purpose of this study is to: estimate changes in open defecation prevalence between 2005 and 2010 across countries in sub-Saharan Africa; examine the association between national level indices and changes in open defecation prevalence; and assess how many countries can achieve 'open defecation free status' by 2015. After applying selection criteria, this study analyzed country-level data for 34 sub-Saharan African countries. Seven country-level indices were collected: 1) presence of a national sanitation policy; 2) budget line for sanitation; 3) budget allocated to sanitation; 4) annual per capita GDP; 5) GDP growth; 6) implementation of total sanitation approaches; and 7) per capita aid disbursement for water supply and sanitation. The relationships between these country-level indices and the change in open defecation from 2005 to 2010 were investigated using Wilcoxon Signed-Rank test and Spearman's rank correlation test. Only 3 countries (i.e. Ethiopia, Angola and Sao Tome and Principe) decreased open defecation by 10% or more between 2005 and 2010. No significant associations were observed between the change in open defecation prevalence and all of national level indices except per capita aid disbursement. Per capita aid disbursement for water and sanitation was positively associated with a reduction in open defecation (p-value = 0.02) for a subset of 29 low-income countries from 2005 to 2010. Only one country in our analysis, Angola, is on track to end open defecation by 2015 based on their performance between 2000 and 2010. Most of the national level indices, including a country's economic status, were not associated with the change in the open defecation prevalence. Based on current trends, the goal

  13. Trends in thermal discomfort indices over western coastal cities of India

    Science.gov (United States)

    Desai, Manasi S.; Dhorde, Amit G.

    2018-02-01

    The present research aimed at analyzing temporal trends in thermal discomfort indices for a period of 46 years from 1969 to 2014 over western coastal region of India for seven urban centers during the months of pre-monsoon and monsoon seasons. Direct thermal discomfort indices employed for this purpose were thermo-hygrometric index (THI) and heat index (HI). Statistical techniques applied for obtaining temporal trends were linear regression model and Mann-Kendall (MK) rank test. Statistical significance of the obtained trends was evaluated at 95% confidence level. Sequential MK (SQ-MK) test was used for change point detection. To investigate actual incidences of thermal discomfort, daily index values were averaged for standard meteorological weeks (SMWs) over the study period and decadal percentage of thermal discomfort during SMWs was estimated. Trend analysis of selected meteorological parameters such as dry bulb temperature (DBT), wet bulb temperature (WBT), relative humidity (RH), and wind speed (WS) were investigated, which might be responsible for variation in thermal discomfort over the period. The results obtained depicted significant increase in thermal discomfort over the cities located on the southern part of west coast, while significant increase was observed during monsoon season months compared to pre-monsoon season. Decadal variation in percentage of SMWs falling in various discomfort categories was studied. At majority of the stations, moderate and high-risk SMWs have increased over the last two decades. The results of change point detection for THI and HI denoted significant increase at most of the stations after 1990s. The study validates increase in thermal discomfort vulnerability, particularly at thriving urban centers of western coastal region of India.

  14. Annoyance and Worry in a Petrochemical Industrial Area—Prevalence, Time Trends and Risk Indicators

    Directory of Open Access Journals (Sweden)

    Lars Barregard

    2013-04-01

    Full Text Available In 1992, 1998, and 2006, questionnaires were sent to stratified samples of residents aged 18–75 years living near petrochemical industries (n = 600–800 people on each occasion and in a control area (n = 200–1,000. The aims were to estimate the long-term prevalence and change over time of annoyance caused by industrial odour, industrial noise, and worries about possible health effects, and to identify risk indicators. In 2006, 20% were annoyed by industrial odour, 27% by industrial noise (1–4% in the control area, and 40–50% were worried about health effects or industrial accidents (10–20% in the control area. Multiple logistic regression analyses revealed significantly lower prevalence of odour annoyance in 1998 and 2006 than in 1992, while industrial noise annoyance increased significantly over time. The prevalence of worry remained constant. Risk of odour annoyance increased with female sex, worry of health effects, annoyance by motor vehicle exhausts and industrial noise. Industrial noise annoyance was associated with traffic noise annoyance and worry of health effects of traffic. Health-risk worry due to industrial air pollution was associated with female sex, having children, annoyance due to dust/soot in the air, and worry of traffic air pollution.

  15. Energy indicators impact in multi-criteria sustainability analyse of thermal power plant unit

    Directory of Open Access Journals (Sweden)

    Škobalj Predrag D.

    2017-01-01

    Full Text Available This paper presents method for sustainability assessment of thermal power plant unit using multi-criteria analysis with aim to create base for business decision. Seven options of possible status of thermal power plant „Kolubara A” unit No. 2 with energy indicators of sustainable development were shown. Energy indicators of sustainable development consists of sets of resource preservation, economic, environmental, and social indicators. Sustainability assessment often fails to account for social influence on energy system. Considering to this, special focus will be on social indicators, their definition, forming, and impact on multi-criteria sustainability analysis. Analysis of quality of the selected options (energy systems in respect to sustainable development by compare of their general index of sustainability is presented. Methodology of multi-criteria analyse of thermal power plant unit can show decision makers how to find best available options when the social indicators impact is leading. The aim of this paper is to choose the criteria for the evaluation of the available options, determine the relative importance of specific criteria and present methodology of multi-criteria analysis in the decision-making process.

  16. [THERMAL STABILITY AS A PROGNOSTIC INDICATOR OF CONSERVATION OF LIVE EMBRYONIC SMALLPOX VACCINE (TEOVAC) DURING STORAGE].

    Science.gov (United States)

    Zhukov, V A; Kokorev, S V; Rogozhkina, S V; Melnikov, D G; Terentiev, A I; Kovalchuk, E A; Vakhnov, E Yu; Borisevich, S V

    2016-01-01

    Determination of values of coefficients of thermal stability of TEOVac for prognosis of conservation of the vaccine (specific biological activity) during the process of warranty period storage. TEOVac (masticatory tablets) in primary packaging was kept at increased temperature (accelerated and stress-tests) and at the conditions established by PAP for the preparation (long-term tests). Biological activity of the vaccine was determined by titration on 12-day chicken embryos. A correlation between the value of coefficients of thermal stability and conservation of the prepared series of the condition preparation at the final date of storage was experimentally established. Coefficients of thermal stability could be used as a prognostic indicator of quality of the produced pelleted formulation of the preparation for evaluation of conservation of the vaccine during warranty period storage.

  17. Differential scanning calorimetry thermal properties and oxidative stability indices of microwave heated extra virgin olive oils.

    Science.gov (United States)

    Chiavaro, Emma; Rodriguez-Estrada, Maria Teresa; Bendini, Alessandra; Rinaldi, Massimiliano; Cerretani, Lorenzo

    2011-01-30

    The use of differential scanning calorimetry (DSC) for assessing the deterioration effect of microwave heating on vegetable oils, and on olive oils in particular, has been partially explored in literature. The aim of this work was to evaluate the potential of DSC to discriminate among microwaved extra virgin olive oils (EvOo from different olive cultivar and origin), according to changes on thermal properties (upon cooling and heating) and traditional oxidative stability indices (peroxide, p-anisidine and TOTOX values). An elevated value of lipid oxidation was reached by the most unsaturated EvOo sample (9.5% of linoleic acid) at 6 min of microwave treatment. Free acidity significantly increased (0.42%) only for the oil sample with the highest water content (874 mg kg(-1) oil) at the longest time of treatment. Crystallisation enthalpies significantly decreased and the major exothermic peak shifted towards lower temperature, leading to enlargement of the transition range in all samples due to the formation of weak and mixed crystals among triacylglycerols and lipid degradation products. On the contrary, thermal properties upon heating appeared to similarly vary among samples. The analysis of DSC thermal properties upon cooling seemed to clearly discriminate among different EvOo samples after microwaving. The relation between changes of thermal properties and oxidation parameters should be further studied using additional oxidative stability indices on a larger set of oil samples, due to the complexity of EvOo composition. 2010 Society of Chemical Industry.

  18. Prevalence of antibiotic residues in commercial milk and its variation by season and thermal processing methods

    Directory of Open Access Journals (Sweden)

    Fathollah Aalipour

    2013-01-01

    Full Text Available Aims: In this study, the prevalence of antibiotic residues in pasteurized and sterilized commercial milk available in Shahre-kourd, Iran, was investigated. In addition, the influence of seasonal temperature changes on the prevalence of contamination was studied. Materials and Methods: Commercial milk samples of 187, including 154 pasteurized and 33 sterilized, milk samples were collected from the market between early January 2012 and late July of the same year. The presence of antibiotic residues was detected using the microbiological detection test kit, Eclipse 100, as a semi-quantitative method. Results: The results showed that 37 of the samples (19.8% have contained antibiotic residues above the European Union Maximum Residues Limits (EU-MRLs, of which 28 samples (14.97% were found to be contaminated but at the concentrations below the EU-MRLs. There was no significant difference between the contamination rate of pasteurized and Ultra High Temperature (UHT-sterilized samples. Similarly, variation of weather temperature with seasons had no effect on the contamination prevalence of milk samples ( P > 0.05. Conclusion: Based on the result of this study, antibiotics residues were present in the majority of milk samples. Neither the season nor the type of thermal processing of the commercial milks had noticeable impact on the prevalence level of the milk samples. However, an increasing trend of prevalence level for antibiotic residues was observed with increasing the temperature through the warm season.

  19. Do structural quality indicators of nutritional care influence malnutrition prevalence in Dutch, German, and Austrian nursing homes?

    Science.gov (United States)

    van Nie, Noémi C; Meijers, Judith M M; Schols, Jos M G A; Lohrmann, Christa; Spreeuwenberg, Marieke; Halfens, Ruud J G

    2014-01-01

    The aim of this study was to explore whether structural quality indicators for nutritional care influence malnutrition prevalence in the Netherlands, Germany, and Austria. Furthermore, differences in malnutrition prevalence and structural quality indicators for nutritional care nursing homes in the three countries were examined. This was a cross-sectional, multicenter study using a standardized questionnaire at the patient, ward, and institutional levels. Malnutrition was assessed by low body mass index, undesired weight loss, and reduced intake. Structural quality indicators of nutritional care were measured at the ward and institutional levels. The prevalence of malnutrition differed significantly between the three countries (Netherlands 18%, Germany 20%, and Austria 22.7%). Structural quality indicators related to nutritional care as having a guideline of prevention and treatment of malnutrition were related to malnutrition and explained malnutrition prevalence variance between the Netherlands and Germany. Differences between the Netherlands and Austria in malnutrition prevalence still existed after controlling for these quality structural indicators. Structural quality indicators of nutritional care are important in explaining malnutrition variance between the Netherlands and Germany. However, they did not explain the difference in malnutrition prevalence between the Netherlands and Austria. Investigating the role of process indicators may provide insight in the role of structural quality indicators of nutritional care in explaining the malnutrition prevalence differences between the Netherlands and Austria. Copyright © 2014 Elsevier Inc. All rights reserved.

  20. Thermal comfort indices of female Murrah buffaloes reared in the Eastern Amazon

    Science.gov (United States)

    da Silva, Jamile Andréa Rodrigues; de Araújo, Airton Alencar; Lourenço Júnior, José de Brito; dos Santos, Núbia de Fátima Alves; Garcia, Alexandre Rossetto; de Oliveira, Raimundo Parente

    2015-09-01

    The study aimed to develop new and more specific thermal comfort indices for buffaloes reared in the Amazon region. Twenty female Murrah buffaloes were studied for a year. The animals were fed in pasture with drinking water and mineral supplementation ad libitum. The following parameters were measured twice a week in the morning (7 AM) and afternoon (1 PM): air temperature (AT), relative air humidity (RH), dew point temperature (DPT), wet bulb temperature (WBT), black globe temperature (BGT), rectal temperature (RT), respiratory rate (RR), and body surface temperature (BST). The temperature and humidity index (THI), globe temperature and humidity index (GTHI), Benezra's comfort index (BTCI), and Ibéria's heat tolerance index (IHTI) were calculated so they could be compared to the new indices. Multivariate regression analyses were carried out using the canonical correlation model, and all indices were correlated with the physiological and climatic variables. Three pairs of indices (general, effective, and practical) were determined comprising the buffalo comfort climatic condition index (BCCCI) and the buffalo environmental comfort index (BECI). The indices were validated and a great agreement was found among the BCCCIs (general, effective, and practical), with 98.3 % between general and effective a.nd 92.6 % between general and practical. A significant correlation ( P physiological and climatic variables, which indicated that these may be used in pairs to diagnose thermal stress in buffaloes reared in the Amazon.

  1. Prevalence, and early childhood caries risk indicators in preschool children in suburban Nigeria.

    Science.gov (United States)

    Folayan, Morenike O; Kolawole, Kikelomo A; Oziegbe, Elizabeth O; Oyedele, Titus; Oshomoji, Olusegun V; Chukwumah, Nneka M; Onyejaka, Nneka

    2015-06-30

    Early Childhood Caries (ECC) is defined as the presence of caries lesion in an primary tooth in children below the age of 71 months. It is a significant public health problem with consequences for the growth and development of affected children. The objective of this study was to determine the prevalence and ECC risk indicators in a suburban population in Nigeria. The data of 497 children aged 6 months to 71 months who were recruited through a household survey conducted in Ile-Ife, Nigeria was analysed for prevalence of ECC and risk indicators. Information on children's ages, sex, socioeconomic status, tooth brushing habits, sugary snacks consumption, use of fluoridated toothpaste, birth rank, infant-feeding practices, breastfeeding practices, maternal age at childbirth, and maternal knowledge of oral health was obtained. Children's oral hygiene and caries status was also determined. Risk factors associated with ECC were determined using logistic regression analysis. Thirty-three (6.6%) children had ECC. Four (0.8%) had severe ECC. The four risk indicators for ECC were the child's gender, mothers' knowledge of oral health, consumption of sugary snacks in between meals more than three times a day, and the child's oral hygiene status. Females (PR: -0.06; 95% CI: -0.01- -0.01; p = 0.02), and children with mothers who had good knowledge of oral health (PR: -0.06; 95% CI: -0.11--0.008; p = 0.02) were less likely to have ECC. Children who consumed sugary snacks in between meals three times a day or more (PR: 0.05; CI: 0.003 - 0.01; P = 0.04) and children with fair oral hygiene (PR: 0.05; 95% CI: 0.005-0.10; p = 0.03) were more likely to have ECC. The prevalence of ECC in the study population was low. Promoting good oral hygiene practices and enhancing mothers' knowledge of oral health may help reduce further, the risk for ECC in the study population.

  2. Prevalence, risk indicators and outcomes of bullying among on-reserve First Nations youth.

    Science.gov (United States)

    Lemstra, Mark; Rogers, Marla; Redgate, Lauren; Garner, Meghan; Moraros, John

    2011-01-01

    Bullying is common and multifaceted. There is no published literature focusing on bullying in First Nations youth on-reserve in Canada. The purpose of this paper is to examine the prevalence, risk indicators and impact of bullying within a First Nations youth population currently living on-reserve. Students in grades 5 through 8 (age 10 to 16 years) within the Saskatoon Tribal Council were asked to complete a youth health survey. Among the seven schools, 271 students were eligible to participate. 204 youth completed the eight-stage consent protocol and the school survey for a response rate of 75.3%. Overall, 35.8% of youth reported being physically bullied, 59.3% verbally bullied, 47.5% socially bullied and 30.3% electronically bullied at least once or twice in the previous four weeks. After regression analysis, having a father who works in a professional occupation, doing well in school, and having the perception that parents expect too much from them were found to be independent risk indicators of being bullied. Irrespective of the type of bullying, youth who were bullied were at least twice as likely to suffer from depressed mood. We have found that bullying is more common for First Nations youth living on-reserve, compared to other Canadian youth. Given that the independent risk indicators also appear to be different, we hope that this new information can aid in the design of effective bullying strategies.

  3. Prevalence of intersex in eelpout (Zoarces viviparus) as an ecosystem status indicator

    DEFF Research Database (Denmark)

    Tomkiewicz, Jonna; Strand, Jakob

    exhibited the highest intersex prevalence at contaminated marine stations, but also occurred at sites with apparently little pollution. Severity of abnormality was not proportional to prevalence. The findings suggest that feminized male fish were exposed to endocrine disrupting substances...

  4. Consumption of thermally oxidized palm oil diets alters biochemical indices in rats

    Directory of Open Access Journals (Sweden)

    Ayodeji Osmund Falade

    2015-06-01

    Full Text Available Palm oil is thermally oxidized to increase its palatability and this has been a usual practice in most homes. This study sought to assess the biochemical responses of rats to thermally oxidized palm oil diets. Therefore, Wistar strain albino rats (Rattus norveigicus were fed with fresh palm oil (control and thermally oxidized palm oil (test groups diets and water ad libitum for 30 days. Then, the malondialdehyde (MDA contents and total protein of the plasma and liver were determined. Subsequently, the plasma liver function markers [alanine transaminase (ALT, aspartate transaminase (AST, alkaline phosphatase (ALP, albumin (ALB and total bilirubin (TBIL ] and the lipid profile [triglyceride (TRIG, total cholesterol (T-CHOL, high density lipoprotein (HDL-CHOL and low density lipoprotein (LDL-CHOL ] were assayed. The results of the study revealed that there was a significant decrease (P < 0.05 in the plasma and liver total protein, ALB, TRIG and HDL-CHOL of the test groups when compared with the control. Conversely, there was a significant increase (P < 0.05 in the activities of ALT, AST and ALP, TBIL, T-CHOL, LDL-CHOL and plasma/liver MDA of the test groups when compared with the control. These effects were most pronounced in rats fed with 20 min-thermally oxidized palm oil diet. Hence, consumption of thermally oxidized palm oil diets had deleterious effects on biochemical indices in rats. Therefore, cooking with and/or consumption of palm oil subjected to heat treatment for several long periods of time should be discouraged in our homes as this might have deleterious effects on human health.

  5. Prevalence of indicator and pathogenic bacteria in a tropical river of Western Ghats, India

    Science.gov (United States)

    Vincy, M. V.; Brilliant, R.; Pradeepkumar, A. P.

    2017-05-01

    The Meenachil, the only river that flows through the heart of the Kottayam district of Kerala state, India was selected for the study. The present study has been carried out with an objective to systematically examine the prevalence of indicator and pathogenic microorganisms and to compare the microbiological quality of the river water during the pre-monsoon and post-monsoon seasons. Water samples from 44 different sites during pre-monsoon and post-monsoon seasons were collected for the analysis. During the pre-monsoon period, the faecal coliform count ranged from 230 to 110,000 MPN/100 ml while there was a variation from 200 to 4600 MPN/100 ml during the post-monsoon period. When the faecal streptococci count was analysed, it ranged from 140 to 110,000 MPN/100 ml during the pre-monsoon and 70 to 4600 MPN/100 ml during the post-monsoon seasons, respectively. All the samples collected were found to have total viable count (TVC) higher than those prescribed by Bureau of Indian Standards (ISI 1991). Total viable counts were found in the range of 1.1 × 102 to 32 × 102 cfu/ml in the pre-monsoon and 1.0 × 102 to 26 × 102 cfu/ml in the post-monsoon. The presence of faecal indicator bacteria, Escherichia coli and potentially pathogenic bacteria, Vibrio cholerae, Vibrio parahaemolyticus and Salmonella enterica in the Meenachil River indicates that the bacteriological quality of the Meenachil River is poor. Moreover, it sheds light to the fact that raw sewage is being dumped into the Meenachil River. Urban runoffs and effluents of rubber factories appear to be the important sources of faecal contamination in the river. From this study, we conclude that these water bodies pose significant public health hazards. Adequate sanitary infrastructure will help in preventing source water contamination. Besides this, public health education aimed at improving personal, household and community hygiene is urgent.

  6. Evaluating the Indicators of Financial Status of the Enterprises of Thermal Power Industry in Ukraine

    Directory of Open Access Journals (Sweden)

    Abakumenko Olha V.

    2017-07-01

    Full Text Available The article is aimed at identifying general trends and problems in the development of part of the energy generating segment of the electric power sector of Ukraine, namely – thermal power generation companies. Changes in the energy sector of Ukraine, as a result of the political developments of 2013-2015, increased the relevance of modernization in electric power generation. However, the elaboration of proposals for improving the energy sector in Ukraine should be based on an understanding of the existing characteristics and problems of its functioning. In the publications of recent years, the problems of micro-level have been overlooked by researchers, although characteristics and problems of the enterprises’ activities are being largely embossed by the industry-wide turmoil. The data of financial statements of the domestic thermal power industry indicate heterogeneity of their development. The carried out analysis allows to make findings of the general problem as to development of Ukrainian thermal power generation enterprises, which is inefficient management, resulting in a gradual loss of the industry’s productive capacity of the industry sector in the face of high production costs for the population.

  7. Social-structural indices and between-nation differences in HIV prevalence

    OpenAIRE

    Tan, Judy Y; Earnshaw, Valerie A; Pratto, Felicia; Rosenthal, Lisa; Kalichman, Seth

    2014-01-01

    Research emphasises the role that social structures play in shaping national HIV prevalence. This study examined how social, economic, and political contexts that may represent the confluence of individual capabilities and environmental affordances or constraints are associated with national HIV prevalence. Based on social-ecological perspectives, we examined social-structural dimensions in relation to national HIV prevalence. The study identified six publicly available nation-level social, p...

  8. Using prevalence indices to aid interpretation and comparison of agreement ratings between two or more observers.

    Science.gov (United States)

    Burn, Charlotte C; Weir, Alex A S

    2011-05-01

    Veterinary clinical and epidemiological investigations demand observer reliability. Kappa (κ) statistics are often used to adjust the observed percentage agreement according to that expected by chance. In highly homogenous populations, κ ratings can be poor, despite percentage agreements being high, because the probability of chance agreement is also high. Veterinary researchers are often unsure how to interpret these ambiguous results. It is suggested that prevalence indices (PIs), reflecting the homogeneity of the sample, should be reported alongside percentage agreements and κ values. Here, a published PI calculation is extended, permitting extrapolation to situations involving three or more observers. A process is proposed for classifying results into those that do and do not attain clinically useful ratings, and those tested on excessively homogenous populations and which are therefore inconclusive. Pre-selection of balanced populations, or adjustment of scoring thresholds, can help reduce population homogeneity. Reporting PIs in observer reliability studies in veterinary science and other disciplines enables reliability to be interpreted usefully and allows results to be compared between studies. Copyright © 2010 Elsevier Ltd. All rights reserved.

  9. Chronic fatigue syndrome and fibromyalgia in Canada: prevalence and associations with six health status indicators

    Directory of Open Access Journals (Sweden)

    C. Rusu

    2015-03-01

    Full Text Available Introduction: Few studies have considered the factors independently associated with chronic fatigue syndrome (CFS and/or fibromyalgia (FM or considered the impact of these conditions on health status using population-based data. Methods: We used data from the nationally representative 2010 Canadian Community Health Survey (n= 59 101 to describe self-reported health professional-diagnosed CFS and/or FM, and their associations with 6 health status indicators. Results: In 2010, diagnosed CFS and FM are reported by 1.4% (95% confidence interval [CI]: 1.3%–1.6% and 1.5% (1.4%–1.7%, respectively, of the Canadian household population aged 12 years and over, with comorbid CFS and FM affecting 0.3% (0.3%–0.4% of that population. Prevalent CFS and/or FM were more common among women, adults aged 40 years and over, those with lowest income, and those with certain risk factors for chronic disease (i.e. obesity, physical inactivity and smoking. After controlling for differences between the groups, people with CFS and/or FM reported poorer health status than those with neither condition on 5 indicators of health status, but not on the measure of fair/poor mental health. Having both CFS and FM and having multiple comorbid conditions was associated with poorer health status. Conclusion: Co-occurrence of CFS and FM and having other chronic conditions were strongly related to poorer health status and accounted for much of the differences in health status. Understanding factors contributing to improved quality of life in people with CFS and/or FM, particularly in those with both conditions and other comorbidities, may be an important area for future research.

  10. Predicting Antimicrobial Resistance Prevalence and Incidence from Indicators of Antimicrobial Use: What Is the Most Accurate Indicator for Surveillance in Intensive Care Units?

    Directory of Open Access Journals (Sweden)

    Élise Fortin

    Full Text Available The optimal way to measure antimicrobial use in hospital populations, as a complement to surveillance of resistance is still unclear. Using respiratory isolates and antimicrobial prescriptions of nine intensive care units (ICUs, this study aimed to identify the indicator of antimicrobial use that predicted prevalence and incidence rates of resistance with the best accuracy.Retrospective cohort study including all patients admitted to three neonatal (NICU, two pediatric (PICU and four adult ICUs between April 2006 and March 2010. Ten different resistance/antimicrobial use combinations were studied. After adjustment for ICU type, indicators of antimicrobial use were successively tested in regression models, to predict resistance prevalence and incidence rates, per 4-week time period, per ICU. Binomial regression and Poisson regression were used to model prevalence and incidence rates, respectively. Multiplicative and additive models were tested, as well as no time lag and a one 4-week-period time lag. For each model, the mean absolute error (MAE in prediction of resistance was computed. The most accurate indicator was compared to other indicators using t-tests.Results for all indicators were equivalent, except for 1/20 scenarios studied. In this scenario, where prevalence of carbapenem-resistant Pseudomonas sp. was predicted with carbapenem use, recommended daily doses per 100 admissions were less accurate than courses per 100 patient-days (p = 0.0006.A single best indicator to predict antimicrobial resistance might not exist. Feasibility considerations such as ease of computation or potential external comparisons could be decisive in the choice of an indicator for surveillance of healthcare antimicrobial use.

  11. Field Measurements Indicate Unexpected, Serious Underestimation of Mussel Heart Rates and Thermal Tolerance by Laboratory Studies.

    Directory of Open Access Journals (Sweden)

    Morgana Tagliarolo

    Full Text Available Attempts to predict the response of species to long-term environmental change are generally based on extrapolations from laboratory experiments that inevitably simplify the complex interacting effects that occur in the field. We recorded heart rates of two genetic lineages of the brown mussel Perna perna over a full tidal cycle in-situ at two different sites in order to evaluate the cardiac responses of the two genetic lineages present on the South African coast to temperature and the immersion/emersion cycle. "Robomussel" temperature loggers were used to monitor thermal conditions at the two sites over one year. Comparison with live animals showed that robomussels provided a good estimate of mussel body temperatures. A significant difference in estimated body temperatures was observed between the sites and the results showed that, under natural conditions, temperatures regularly approach or exceed the thermal limits of P. perna identified in the laboratory. The two P. perna lineages showed similar tidal and diel patterns of heart rate, with higher cardiac activity during daytime immersion and minimal values during daytime emersion. Comparison of the heart rates measured in the field with data previously measured in the laboratory indicates that laboratory results seriously underestimate heart rate activity, by as much as 75%, especially during immersion. Unexpectedly, field estimates of body temperatures indicated an ability to tolerate temperatures considered lethal on the basis of laboratory measurements. This suggests that the interaction of abiotic conditions in the field does not necessarily raise vulnerability to high temperatures.

  12. ORGANIZATIONAL AND LEGAL RESEARCH OF INDICATORS OF INCIDENCE AND PREVALENCE OF DIABETES MELLITUS IN COUNTRYSIDE AREAS

    Directory of Open Access Journals (Sweden)

    Zbrozhek SI

    2017-03-01

    legal framework for the organization of pharmacy of the healthcare system in countryside areas; forensic and pharmaceutical practice concerning the complaints on countryside accessibility for their antidiabetic drugs; regional statistics of incidence and prevalence of diabetes mellitus. In conducting the research used the following methods: legal, documentary, bibliography, comparative, forensic and pharmaceutical, graphical analysis. Results and discussion. In the limited funding of the healthcare system and low pharmaceutical ensuring of patients with diabetes mellitus in countryside areas, the question of the optimal use of funds to avoid negative consequences, as evidenced presented in the article on an example of forensic and pharmaceutical practice. Among the possible reasons for such organizations to ensure pharmaceutical provision for privileged categories of citizens can point to the constant rise in prices for antidiabetic drugs and delay in timely registration of wholesale prices for these drugs. Also during the study was a comparative analysis of incidence and prevalence of diabetes at the regional level by the example of Kharkov region. The increase in the prevalence of diabetes is due to various factors, including stress, obesity, aging population, quality of food and life. The increase in the prevalence of the disease may indicate a lack of financing health systems, insufficient qualifications and training of medical personnel, the remoteness of rural health facilities and inadequate organization providing pharmaceutical rural antidiabetic drugs passivity farmers regarding preventive examinations, treatment their health, compliance with recommendations and a low level in the chain of relations "doctor - patient with diabetes mellitus - pharmacist." Conclusions. Diabetes mellitus treatment should be based on the principles of pharmaceutical law provided in Art. 4 of the Law of Ukraine "On the basis of legislation of Ukraine on healthcare" from the state

  13. Thermal Field Indicator for Identifying Active Faults and its Instability From Laboratory Experiments

    Science.gov (United States)

    Ma, J.; Liu, L.; Liu, P.; Ma, S.

    2007-12-01

    The relationship between the thermal filed and strain field during deformation of faults is the physical basis to clarify whether satellite infrared information and the ground temperature field can be used to study fault activity. This study attempts to discuss these problems by experiments in the laboratory. The two-direction servo-control system was used to load on the samples with compressional and extensional en echelon faults. An infrared thermal image system and a contact-type thermometer recorded synchronously variations of the bright temperature field of infrared radiation and temperature field during deformation of the rock specimens. A digital CCD camera and a soft ware based on the digital speckle correlation method (DSCM) was utilized to capture images and to analyze them, yielding processes of displacement and strain fields. The experimental result shows as follows: 1 The temperature is highest at the jog area of the compressional en echelon faults, whereas that is lowest at the extensional en echelon faults prior to failure of the jog area. The record by DSCM displays that the mean strain of the jog area is largest for the compressional en echelon faults, while that is smallest for the extensional en echelon faults. These mean that the temperature field has clear responses to the opposite stress states at the jog areas of two kinds of en echelon faults, providing an indicator for determining whether the fault segment has slid. 2 The en echelon faults experience two deformation stages from stress building up and fault propagating at the jog area to unstable sliding along the fault. Correspondingly the mechanism of heating-up is turned from strain heating into frictional heating. Three kinds of phenomena have been observed at the jog area and its vicinity during the stage of transformation. They are temperature drop, fast fluctuation of temperature, and pulses of temperature rising, respectively. Mechanism of these phenomena is discussed. 3 These

  14. Changes in the distribution of South Korean forest vegetation simulated using thermal gradient indices.

    Science.gov (United States)

    Choi, Sungho; Lee, Woo-Kyun; Son, Yowhan; Yoo, Seongjin; Lim, Jong-Hwan

    2010-07-01

    To predict changes in South Korean vegetation distribution, the Warmth Index (WI) and the Minimum Temperature of the Coldest Month Index (MTCI) were used. Historical climate data of the past 30 years, from 1971 to 2000, was obtained from the Korea Meteorological Administration. The Fifth-Generation National Center for Atmospheric Research (NCAR) /Penn State Mesoscale Model (MM5) was used as a source for future climatic data under the A1B scenario from the Special Report on Emission Scenario (SRES) of the Intergovernmental Panel on Climate Change (IPCC). To simulate future vegetation distribution due to climate change, the optimal habitat ranges of Korean tree species were delimited by the thermal gradient indices, such as WI and MTCI. To categorize the Thermal Analogy Groups (TAGs) for the tree species, the WI and MTCI were orthogonally plotted on a two-dimensional grid map. The TAGs were then designated by the analogue composition of tree species belonging to the optimal WI and MTCI ranges. As a result of the clustering process, 22 TAGs were generated to explain the forest vegetation distribution in Korea. The primary change in distribution for these TAGs will likely be in the shrinkage of areas for the TAGs related to Pinus densiflora and P. koraiensis, and in the expansion of the other TAG areas, mainly occupied by evergreen broad-leaved trees, such as Camellia japonica, Cyclobalanopsis glauca, and Schima superba. Using the TAGs to explain the effects of climate change on vegetation distribution on a more regional scale resulted in greater detail than previously used global or continental scale vegetation models.

  15. The prevalence of obesity as indicated by body mass index among ...

    African Journals Online (AJOL)

    The aim of this study is to determine the prevalence of obesity using BMI and to assess the relative associations with some cardiovascular risk factors (CVD). Subjects for this study were apparently healthy volunteers who willingly granted their informed consent. They reported at the various study zones of the town after an ...

  16. Plasma Viral miRNAs Indicate a High Prevalence of Occult Viral Infections

    Directory of Open Access Journals (Sweden)

    Enrique Fuentes-Mattei

    2017-06-01

    Full Text Available Prevalence of Kaposi sarcoma-associated herpesvirus (KSHV/HHV-8 varies greatly in different populations. We hypothesized that the actual prevalence of KSHV/HHV8 infection in humans is underestimated by the currently available serological tests. We analyzed four independent patient cohorts with post-surgical or post-chemotherapy sepsis, chronic lymphocytic leukemia and post-surgical patients with abdominal surgical interventions. Levels of specific KSHV-encoded miRNAs were measured by reverse transcription-quantitative polymerase chain reaction (RT-qPCR, and KSHV/HHV-8 IgG were measured by immunoassay. We also measured specific miRNAs from Epstein Barr Virus (EBV, a virus closely related to KSHV/HHV-8, and determined the EBV serological status by ELISA for Epstein-Barr nuclear antigen 1 (EBNA-1 IgG. Finally, we identified the viral miRNAs by in situ hybridization (ISH in bone marrow cells. In training/validation settings using independent multi-institutional cohorts of 300 plasma samples, we identified in 78.50% of the samples detectable expression of at least one of the three tested KSHV-miRNAs by RT-qPCR, while only 27.57% of samples were found to be seropositive for KSHV/HHV-8 IgG (P < 0.001. The prevalence of KSHV infection based on miRNAs qPCR is significantly higher than the prevalence determined by seropositivity, and this is more obvious for immuno-depressed patients. Plasma viral miRNAs quantification proved that EBV infection is ubiquitous. Measurement of viral miRNAs by qPCR has the potential to become the “gold” standard method to detect certain viral infections in clinical practice.

  17. Prevalence of periodontal disease by recorded indices among low income discount dental school patients.

    Science.gov (United States)

    Famili, Pouran; Shaya, Mandana M

    2014-01-01

    The purpose of this study was to evaluate the prevalence of periodontal disease among the patient population at the University of Pittsburgh who receive the Low Income Discount (LID) financial obligation reduction based on family income in relation to federal poverty guidelines. This was a retrospective study examining the Electronic Health Record at the University of Pittsburgh School of Dental Medicine (axiUm, Exan Group) from August 2008 to April 2013 (N = 7936). Records of the complete periodontal examination, income, age, gender, race, and other variables were collected and analyzed. Logistic regressions were performed, controlling for patients' age, ethnicity, smoking status, BMI, and diabetes. The odds of having periodontal disease for patients receiving the low income discount (LID) was higher (1.055), but the difference was not statistically significant (P = 0.35). Patients receiving the low income discount did not have a higher prevalence of periodontal disease. Factors other than income appear to be more important to predict greater prevalence of periodontal disease, but this insight requires further investigation.

  18. Prevalence of rape-related pregnancy as an indication for abortion at two urban family planning clinics.

    Science.gov (United States)

    Perry, Rachel; Zimmerman, Lindsay; Al-Saden, Iman; Fatima, Aisha; Cowett, Allison; Patel, Ashlesha

    2015-05-01

    We sought to estimate the prevalence of rape-related pregnancy as an indication for abortion at two public Chicago facilities and to describe demographic and clinical correlates of women who terminated rape-related pregnancies. We performed a cross-sectional study of women obtaining abortion at the Center for Reproductive Health (CRH) at University of Illinois Health Sciences Center and Reproductive Health Services (RHS) at John H. Stroger, Jr. Hospital between August 2009 and August 2013. Gestational age limits at CRH and RHS were 23+6 and 13+6weeks, respectively. We estimated the prevalence of rape-related pregnancy based on billing code (CRH) or data from an administrative database (RHS), and examined relationships between rape-related pregnancy and demographic and clinical variables. Included were 19,465 visits for abortion. The majority of patients were Black (85.6%). Prevalence of abortion for rape-related pregnancy was 1.9%, and was higher at CRH (6.9%) than RHS (1.5%). Later gestational age was associated with abortion for rape-related pregnancy (median 12days, prape-related pregnancy at CRH only (prape-related pregnancy than among those terminating for other indications. Rape-related pregnancy as an indication for abortion had a low, but clinically significant prevalence at two urban Chicago family planning centers. Later gestational age was associated with abortion for rape-related pregnancy. Rape-related pregnancy may occur with higher prevalence among some subgroups of women seeking abortion than others. Efforts to address rape-related pregnancy in the abortion care setting are needed. Copyright © 2015 Elsevier Inc. All rights reserved.

  19. Prevalence of High Risk Indications for Influenza Vaccine Varies by Age, Race, and Income

    Science.gov (United States)

    Zimmerman, Richard K.; Lauderdale, Diane S.; Tan, Sylvia M.; Wagener, Diane K.

    2010-01-01

    Estimates of the proportions of the population who are at high risk of influenza complications because of prior health status or who are likely to have decreased vaccination response because of immunocompromising conditions would enhance public health planning and model-based projections. We estimate these proportions and how they vary by population subgroups using national data systems for 2006-2008. The proportion of individuals at increased risk of influenza complications because of health conditions varied 10-fold by age (4.2% of children 64 years). Age-specific prevalence differed substantially by gender, by racial/ethnic groups (with African Americans highest in all age groups) and by income. Individuals living in families with less than 200% of federal poverty level (FPL) were significantly more likely to have at least one of these health conditions, compared to individuals with 400% FPL or more (3-fold greater among 64 years). Among children, there were significantly elevated proportions in all regions compared to the West. The estimated prevalence of immunocompromising conditions ranged from 0.02% in young children to 6.14% older adults. However, national data on race/ethnicity and income are not available for most immunocompromising conditions, nor is it possible to fully identify the degree of overlap between persons with high-risk health conditions and with immunocompromising conditions. Modifications to current national data collection systems would enhance the value of these data for public health programs and influenza modeling. PMID:20674882

  20. Prevalence

    Directory of Open Access Journals (Sweden)

    Ahmed E. Mansour

    2013-07-01

    Conclusion: The prevalence of spontaneous bacterial pleuritis in the studied group of patients with hepatic hydrothorax was 14.3%. Patients with advanced liver disease, low pleural fluid protein, or SBP are at risk for spontaneous bacterial pleuritis.

  1. Anomalous Radon Levels in Thermal Water as an Indicator of Seismic Activity

    International Nuclear Information System (INIS)

    Zmazek, B.; Gregoric, A.; Vaupotic, J.; Kobal, I.

    2008-01-01

    Radon can be transported effectively from deep layers of the Earth to the surface by carrier gases and by water. This transport is affected by phenomena accompanying seismic events. If radon is therefore monitored shortly before or during an earthquake, at a thermal water spring, an anomaly, i. e. a sudden increase or decrease in radon level, may be observed. Thermal springs and ground waters in Slovenia have therefore been systematically surveyed for radon. The work presented here is a continuation of our previous radon monitoring related to seismic activity carried out on weekly analyses during 1981-82 in thermal waters of the Ljubljana basin. In this paper, we focus on radon anomalies in thermal springs at Hotavlje and Bled in the period from October 2005 to September 2007

  2. Analysis of the indices of thermal comfort for the conditions of the Mexican Republic; Analisis de los indices de confort termico para las condiciones de la republica mexicana

    Energy Technology Data Exchange (ETDEWEB)

    Fuentes Freixanet, Victor; Rodriguez Viqueira, Manuel [Universidad Autonoma Metropolitana - Unidad Azcapotzalco (Mexico)

    2009-07-15

    The objective of this article is to analyze different indices of thermal comfort for the Mexican Republic. Among them the Fanger (PMV and PPD) physiological methods of comfort and the new effective temperature index are included. The standard effective temperature (SET), as well as the adaptive methods of Humphreys and Nicol, Auliciems, De Dear and Brager. A comparative analysis is done of the different indices through thematic maps determined by interpolation, using a climatic data base of 700 cities obtained from the observatories and stations of the National Meteorological Service. This article pretends to establish general criteria of the thermal comfort to later define design strategies for each one of the climatic regions of the Mexican Republic. [Spanish] El objetivo de este articulo es analizar distintos indices de confort termico para la Republica Mexicana. Entre ellos se incluyen los metodos fisiologicos de confort de Fanger (PMV y PPD), el indice de nueva temperatura efectiva. La temperatura efectiva estandar (SET), asi como los metodos adaptativos de Humphreys y Nicol, Auliciems, De Dear y Brager. Se hace un analisis comparativo de los distintos indices a traves de mapas tematicos determinados por interpolacion, usando una base de datos climaticos de 700 ciudades obtenidos de los observatorios y estaciones del Servicio Meteorologico Nacional. Este articulo presenta establecer criterios generales del confort termico para posteriormente definir estrategias de diseno para cada una de las regiones climaticas de la Republica Mexicana.

  3. Combining several thermal indices to generate a unique heat comfort assessment methodology

    OpenAIRE

    Wissam EL Hachem; Joseph Khoury; Ramy Harik

    2015-01-01

    Purpose: The proposed methodology hopes to provide a systematic multi-disciplinary approach to assess the thermal environment while minimizing unneeded efforts. Design/methodology/approach: Different factors affect the perception of the human thermal experience: metabolic rate (biology), surrounding temperatures (heat balance and environmental factors) and cognitive treatment (physiology).This paper proposes a combination of different multidisciplinary variables to generate a unique heat comf...

  4. Does Cyberbullying Prevalence Among Adolescents Relate With Country Socioeconomic and Development Indicators? An Ecological Study of 31 Countries.

    Science.gov (United States)

    Soares, Sara; Brochado, Sandra; Barros, Henrique; Fraga, Sílvia

    2017-10-01

    In addition to individual characteristics, it is also important to evaluate how the environment may influence the dynamics of cyberbullying. We aim to study the correlation between cyberbullying prevalence among adolescents and selected country-level indicators. We used two different data sources: data from a previously published literature review, to identify information on cyberbullying prevalence across countries, and data from the World Bank databases, to extract information on country-level indicators. A correlation matrix was used to present the association between the selected country-level indicators and the prevalence of cyberbullying. We observed a statistically significant negative correlation between cyberbullying victimization (cybervictims and cyberbully-victims, respectively) and gross domestic product (r = -.474 and -.842), gross national income (r = -.485 and -.758), enrollment in secondary (r = -.446 and -.898) and tertiary education (r = -.222 and -.881), the number of secure Internet servers (r = -.118 and -.794), and the number of Internet users (r = -.190 and -.818). A country's educational level seems to be an important contributor to the occurrence of cyberbullying.

  5. Identifying Indicators of Progress in Thermal Spray Research Using Bibliometrics Analysis

    Science.gov (United States)

    Li, R.-T.; Khor, K. A.; Yu, L.-G.

    2016-12-01

    We investigated the research publications on thermal spray in the period of 1985-2015 using the data from Web of Science, Scopus and SciVal®. Bibliometrics analysis was employed to elucidate the country and institution distribution in various thermal spray research areas and to characterize the trends of topic change and technology progress. Results show that China, USA, Japan, Germany, India and France were the top countries in thermal spray research, and Xi'an Jiaotong University, Universite de Technologie Belfort-Montbeliard, Shanghai Institute of Ceramics, ETH Zurich, National Research Council of Canada, University of Limoges were among the top institutions that had high scholarly research output during 2005-2015. The terms of the titles, keywords and abstracts of the publications were analyzed by the Latent Dirichlet Allocation model and visually mapped using the VOSviewer software to reveal the progress of thermal spray technology. It is found that thermal barrier coating was consistently the main research area in thermal spray, and high-velocity oxy-fuel spray and cold spray developed rapidly in the last 10 years.

  6. Prevalence and hematological indicators of G6PD deficiency in malaria-infected patients.

    Science.gov (United States)

    Kotepui, Manas; Uthaisar, Kwuntida; PhunPhuech, Bhukdee; Phiwklam, Nuoil

    2016-04-25

    This study aimed to evaluate the prevalence and alteration of hematological parameters in malaria patients with a glucose-6-phosphate dehydrogenase (G6PD) deficiency, in the western region of Thailand, an endemic region for malaria. Data about patients with malaria hospitalized between 2013 and 2015 were collected. Clinical and sociodemographic characteristics such as age and gender, diagnosis on admission, and parasitological results were mined from medical records of the laboratory unit of the Phop Phra Hospital in Tak Province, Thailand. Venous blood samples were collected at the time of admission to hospital to determine G6PD deficiency by fluorescence spot test and detect malaria parasites by thick and thin film examination. Other data such as complete blood count and parasite density were also collected and analyzed. Among the 245 malaria cases, 28 (11.4 %) were diagnosed as Plasmodium falciparum infections and 217 cases (88.6 %) were diagnosed as P. vivax infections. Seventeen (6.9 %) patients had a G6PD deficiency and 228 (93.1 %) patients did not have a G6PD deficiency. Prevalence of male patients with G6PD deficiency was higher than that of female patients (P G6PD deficiency, two (11.8 %) were infected with P. falciparum, while the remaining were infected with P. vivax. Malaria patients with a G6PD deficiency have higher monocyte counts (0.6 × 10(3)/μL) than those without a G6PD deficiency (0.33 × 10(3)/μL) (P G6PD deficiency have high monocyte counts. The association between G6PD status and monocyte counts was independent of age, gender, nationality, Plasmodium species, and parasite density (P G6PD deficiency in a malaria-endemic area. This study also supported the assertion that patients with G6PD-deficient red blood cells had no protection against the P. falciparum infection. In addition, malaria patients with a G6PD deficiency had higher monocyte counts than those without a G6PD deficiency. These findings will help to recognize and

  7. The prevalence and risk indicators of symptoms of common mental disorders among current and former Dutch elite athletes.

    Science.gov (United States)

    Gouttebarge, Vincent; Jonkers, Ruud; Moen, Maarten; Verhagen, Evert; Wylleman, Paul; Kerkhoffs, Gino

    2017-11-01

    The aim of the study was to determine the prevalence and comorbidity of symptoms of common mental disorders (distress, anxiety/depression, sleep disturbance, eating disorders, adverse alcohol use) among current and former Dutch elite athletes, and to explore the inference between potential risk indicators (severe injury, surgery, life events, sport career dissatisfaction, social support) and the outcomes measures under investigation. Cross-sectional analyses were conducted on baseline questionnaires from an ongoing prospective cohort study among 203 current and 282 former elite Dutch athletes (response rate: 28% among current athletes and 95% among former athletes). Based on validated scales, an electronic questionnaire was set up and distributed. Prevalence (4-week) ranged from 6% for adverse alcohol use to 45% for anxiety/depression among current elite athletes, and from 18% for distress to 29% for anxiety/depression among former elite athletes. A higher number of past severe injuries, higher number of past surgeries, higher number of recent life events, higher level of career dissatisfaction and lower level of social support were related to the occurrence of symptoms of common mental disorders among both current and former elite athletes. On average, the 4-week prevalence of common mental disorders as shown in our study among current and former Dutch elite athletes were similar to the ones found among athletes from other sports disciplines and does compare with the lifetime prevalence estimates in the general population of the Netherlands.

  8. Combining several thermal indices to generate a unique heat comfort assessment methodology

    Directory of Open Access Journals (Sweden)

    Wissam EL Hachem

    2015-11-01

    Full Text Available Purpose: The proposed methodology hopes to provide a systematic multi-disciplinary approach to assess the thermal environment while minimizing unneeded efforts. Design/methodology/approach: Different factors affect the perception of the human thermal experience: metabolic rate (biology, surrounding temperatures (heat balance and environmental factors and cognitive treatment (physiology.This paper proposes a combination of different multidisciplinary variables to generate a unique heat comfort assessment methodology. The variables at stake are physiological, biological, and environmental. Our own heat analysis is thoroughly presented and all relevant equations are described. Findings: Most companies are oblivious about potential dangers of heat stress accidents and thus about methods to monitor and prevent them. This methodology enables the company or the concerned individual to conduct a preliminary assessment with minimal wasted resources and time in unnecessary steps whilst providing a guideline for a detailed study with minimal error rates if needed. More so, thermal comfort is an integral part of sound ergonomics practices, which in turn are decisive for the success of any lean six sigma initiative. Research limitations/implications: This methodology requires several full implementations to finalize its design. Originality/value: Most used heat comfort models are inherently uncertain and tiresome to apply. An extensive literature review confirms the need for a uniform assessment methodology that combines the different thermal comfort models such as the Fanger comfort model (PMV, PPD and WGBT since high error rates coupled with tiresome calculations often hinder the thermal assessment process.

  9. Proteogenomic analyses indicate bacterial methylotrophy and archaeal heterotrophy are prevalent below the grass root zone

    Directory of Open Access Journals (Sweden)

    Cristina N. Butterfield

    2016-11-01

    Full Text Available Annually, half of all plant-derived carbon is added to soil where it is microbially respired to CO2. However, understanding of the microbiology of this process is limited because most culture-independent methods cannot link metabolic processes to the organisms present, and this link to causative agents is necessary to predict the results of perturbations on the system. We collected soil samples at two sub-root depths (10–20 cm and 30–40 cm before and after a rainfall-driven nutrient perturbation event in a Northern California grassland that experiences a Mediterranean climate. From ten samples, we reconstructed 198 metagenome-assembled genomes that represent all major phylotypes. We also quantified 6,835 proteins and 175 metabolites and showed that after the rain event the concentrations of many sugars and amino acids approach zero at the base of the soil profile. Unexpectedly, the genomes of novel members of the Gemmatimonadetes and Candidate Phylum Rokubacteria phyla encode pathways for methylotrophy. We infer that these abundant organisms contribute substantially to carbon turnover in the soil, given that methylotrophy proteins were among the most abundant proteins in the proteome. Previously undescribed Bathyarchaeota and Thermoplasmatales archaea are abundant in deeper soil horizons and are inferred to contribute appreciably to aromatic amino acid degradation. Many of the other bacteria appear to breakdown other components of plant biomass, as evidenced by the prevalence of various sugar and amino acid transporters and corresponding hydrolyzing machinery in the proteome. Overall, our work provides organism-resolved insight into the spatial distribution of bacteria and archaea whose activities combine to degrade plant-derived organics, limiting the transport of methanol, amino acids and sugars into underlying weathered rock. The new insights into the soil carbon cycle during an intense period of carbon turnover, including

  10. Prevalence

    Directory of Open Access Journals (Sweden)

    Jeanesse Scerri

    2013-09-01

    Full Text Available Methicillin-resistant Staphylococcus aureus (MRSA is a major nosocomial pathogen worldwide. Malta is one of the countries with the highest MRSA prevalence in Europe, as identified from hospital blood cultures [1]. However, community prevalence of MRSA has never previously been investigated. This study aimed at establishing the prevalence of community MRSA nasal colonization in Maltese individuals and identifying the clonal characteristics of the detected isolates. Nasal swabs were collected from 329 healthy individuals who were also asked to complete a brief questionnaire about risk factors commonly associated with MRSA carriage and infection. The swabs were transported and enriched in a nutrient broth supplemented with NaCl. The presence of MRSA was then determined by culturing on MRSA Select chromogenic agar and then confirming by several assays, including catalase, coagulase and PBP2a agglutination tests. The isolates were assayed for antibiotic susceptibilities and typed by microarray analysis to determine the clonal characteristics of each strain. The prevalence of MRSA nasal colonization in the healthy Maltese population was found to be 8.81% (95% confidence interval [CI], 5.75–11.87%, much higher than that found in other studies carried out in several countries. No statistical association was found between MRSA carriage and demographics or risk factors; however, this was hindered by the small sample size. Almost all the isolates were fusidic-acid resistant. The majority were found to belong to a local endemic clone (CC5 which seems to be replacing the previously prevalent European clone UK-EMRSA-15 in the country. A new clone (CC50-MRSA-V was also characterized. The presence of such a significant community reservoir of MRSA increases the burdens already faced by the local healthcare system to control the MRSA epidemic. Colonization of MRSA in otherwise healthy individuals may represent a risk for endogenous infection and transmission to

  11. Risk/prevention indicators for the prevalence of dental caries in schoolchildren: results from the Italian OHSAR Survey.

    Science.gov (United States)

    Perinetti, G; Caputi, S; Varvara, G

    2005-01-01

    The Italian Oral Health of Schoolchildren of the Abruzzo Region (OHSAR) Survey was designed to assess indicators associated with the prevalence of caries in both the primary and permanent dentitions in the same schoolchildren, and it comprised a representative sample of 5,938 7-, 9- and 11-year-old schoolchildren from three provinces within the region of Abruzzo, Italy, a low fluoride concentration area. Gender, age, geographic location, socioeconomic level, dietary and oral hygiene habits, and the use of F supplements were all considered as indicators. The subsequent multivariate analyses showed that the socioeconomic level, snack consumption frequency, consumption of sweets and the use of F supplements were mostly associated with caries prevalence in both dentitions. Other indicators, such as gender, age, geographic location, between-meal snack consumption frequency, consumption of sweet drinks, toothbrushing frequency and onset of regular toothbrushing habits also showed some significant associations with dental caries across the age groups and/or dentitions. Of interest, the consumption of commercial bottled mineral water was also seen to be a preventive indicator for dental caries of the primary dentition, particularly in the 7-year-old group. The consumption of sweet snacks, use of interdental floss and kind of toothbrush mainly used (manual or electric) did not show any relevant association with the outcomes. The strong effect of the geographic location, socioeconomical level and the preventive effects of commercial bottled mineral water are worth further investigation. Copyright 2005 S. Karger AG, Basel.

  12. Relationships between Irritable Bowel Syndrome Pain, Skin Temperature Indices of Autonomic Dysregulation, and Sensitivity to Thermal Cutaneous Stimulation

    Directory of Open Access Journals (Sweden)

    Fong Wong

    2010-01-01

    Full Text Available This study evaluated relationships between irritable bowel syndrome (IBS pain, sympathetic dysregulation, and thermal pain sensitivity. Eight female patients with diarrhea-predominant IBS and ten healthy female controls were tested for sensitivity to thermal stimulation of the left palm. A new method of response-dependent thermal stimulation was used to maintain pain intensity at a predetermined level (35% by adjusting thermal stimulus intensity as a function of pain ratings. Clinical pain levels were assessed prior to each testing session. Skin temperatures were recorded before and after pain sensitivity testing. The temperature of palmar skin dropped (1.5∘C when the corresponding location on the opposite hand of control subjects was subjected to prolonged thermal stimulation, but this response was absent for IBS pain patients. The patients also required significantly lower stimulus temperatures than controls to maintain a 35% pain rating. Baseline skin temperatures of patients were significantly correlated with thermode temperatures required to maintain 35% pain ratings. IBS pain intensity was not significantly correlated with skin temperature or pain sensitivity. The method of response-dependent stimulation revealed thermal hyperalgesia and increased sympathetic tone for chronic pain patients, relative to controls. Similarly, a significant correlation between resting skin temperatures and thermal pain sensitivity for IBS but not control subjects indicates that tonic sympathetic activation and a thermal hyperalgesia were generated by the chronic presence of visceral pain. However, lack of a significant relationship between sympathetic tone and ratings of IBS pain casts doubt on propositions that the magnitude of IBS pain is determined by psychological stress.

  13. Malnutrition in Dutch health care: prevalence, prevention, treatment, and quality indicators.

    Science.gov (United States)

    Meijers, Judith M M; Halfens, Ruud J G; van Bokhorst-de van der Schueren, Marian A E; Dassen, Theo; Schols, Jos M G A

    2009-05-01

    In most health care organizations there is still insufficient awareness for recognizing and treating malnourished patients. To gain more insight into nutritional care policies in Dutch health care organizations, this study investigated screening, treatment, and other quality indicators of nutritional care. In 2007 a cross-sectional multicenter study was performed that included 20 255 patients (hospitals, n = 6021; nursing homes, n = 11 902; home care, n = 2332). A standardized questionnaire was used to study nutritional screening and treatment at the patient level and quality indicators at institutional and ward levels (e.g., malnutrition guidelines/protocols, nutritional education, and weighing policy). Nutritional screening was performed more often in nursing homes (60.2%) than in hospitals (40.3%) and home care (13.9%, P hospitals, and home care. At ward level nursing homes focused more on the quality of nutritional care than did hospitals and home care, especially with respect to controlling the use of nutritional guidelines (54.6%, P malnutrition is still a considerable problem in one of every five patients in all participating health care settings. It furthermore demonstrates that recognizing and treating malnutrition continues to be problematic. To target the problem of malnutrition adequately, more awareness is needed of the importance of nutritional screening, appropriate treatment, and other nutritional quality indicators.

  14. Vaccine shot-limiting: Estimating the prevalence, indicators, and impact on vaccination status - Michigan, 2012.

    Science.gov (United States)

    Weinberg, Meghan; Dietz, Stephanie; Potter, Rachel; Swanson, Robert; Miller, Corinne; McFadden, Jevon

    2017-02-15

    Concerns regarding vaccine safety and pain have prompted certain parents to limit the number of shots their child receives per visit. We estimated the prevalence of shot-limited children in Michigan, described their characteristics, assessed whether shot-limited children were up-to-date on recommended vaccinations, and investigated possible intervention points for vaccination education. We analyzed vaccination registry and birth record data of children born in Michigan during 2012 who had ⩾2 vaccination visits, with ⩾1 visits after age 5months. Shot-limited was defined as receiving ⩽2 shots at all visits through age 24months. Nonlimited children received >2 shots at ⩾1 visits. Up-to-date vaccination was based on receipt of a seven-vaccine series and was determined at ages 24months and 35months. Risk ratios (RR) were calculated using risk regression. Of 101,443 children, a total of 2,967 (3%) children were shot-limited. Mothers of shot-limited children were more likely to be white (RR: 1.2; 95% confidence interval [CI]: 1.2-1.2), college graduate (RR: 1.9; 95% CI: 1.9-2.0), and married (RR: 1.5; 95% CI: 1.5-1.5). Compared with nonlimited children, shot-limited children were more likely to be born in a nonhospital setting (RR: 11.7; 95% CI: 9.4-14.6) and have a midwife attendant (RR: 1.9; 95% CI: 1.7-2.1). Shot-limited children were less likely to be up-to-date on recommended vaccinations (RR: 0.2; 95% CI: 0.2-0.3); this association was stronger for those with a midwife birth attendant (RR: 0.1; 95% CI: 0.1-0.2) rather than a medical doctor (RR: 0.3; 95% CI: 0.2-0.3). Shot-limited children are less likely to be up-to-date on vaccinations, possibly leading to increased risk for vaccine-preventable diseases. This association was stronger for those with a midwife birth attendant. This analysis should prompt targeted education, such as to midwives, concerning risks associated with shot-limiting behavior. Published by Elsevier Ltd.

  15. Prevalence of Heart Failure and Adherence to Process Indicators: Which Socio-Demographic Determinants are Involved?

    Directory of Open Access Journals (Sweden)

    Alessandra Buja

    2016-02-01

    Full Text Available Interest in chronic conditions reflects their role as the first cause of death and disability in developed countries; improving the management of these conditions is a priority for health care services. The aim of this study was to establish which sociodemographic factors influence adherence to standards of care for chronic heart failure (CHF. A generalized multilevel structural equation model was developed and applied to a sample of patients with CHF obtained from administrative data flows in six Italian regions to ascertain any associations between adherence to standards of care for CHF and sociodemographic variables. Indicators of compliance were adherence to beta-blocker therapy (BB-A and Angiotensin Convertin Enzime inhibitor/Angiotensin Receptor Blocker therapy (ACE-A, and creatinine and electrolyte testing (CNK-T. All indicators were computed over a one-year follow-up. Among a cohort of 24,997 patients, the BB-A rate was 40.4%, the ACE-A rate 61.1%, and the CNK-T rate 57.0%. Factors found associated with adherence were gender, age, and citizenship. Our study shows an inadequate adherence to standards of care for CHF, particularly associated with certain sociodemographic characteristics. This suggests the need to improve the role of primary care in managing this chronic condition. The measures considered only apply to patients with a reduced Left Ventricular Ejection Fraction, hence a limitation of this analysis is the lack of information on left ventricular ejection.

  16. Thermal inertia as an indicator of rockiness variegation on near-Earth asteroid surfaces

    Science.gov (United States)

    Ali-Lagoa, Victor; Delbo, Marco; Hanus, Josef

    2016-10-01

    Determining key physical properties of asteroids such as sizes and albedos or reflectance spectra is crucial to understand their origins and the processes that they have undergone during their evolution. In particular, one of the aims of NEOShield-2 project, funded by the European Union's Horizon 2020 Research and Innovation programme, is to physically characterize small near Earth asteroids (NEA) in an effort to determine effective mitigation strategies in case of impact with our planet [Harris et al. 2013 2013AcAau,90,80H].We performed thermophysical modelling of NEAs, such as (1685) Toro, and potentially hazardous asteroids (PHAs), such as (33342) 1998 WT24. In addition to size, thermophysical models (TPM) of asteroids can constrain the surface thermal inertia, which is related to the material composition and physical nature, namely its "rockiness" or typical size of the particles on its surface. These have observable effects on the surface temperature distribution as a function of time and thus on the thermal infrared fluxes we observe, to which we can fit our model.In the case of WT24, its thermal inertia has been previously constrained to be in the range 100-300 SI units [Harris et al. 2007, Icarus 188, 414H]. But this was based on a spherical shape model approximation since no shape model was available by the time. Such a low thermal inertia value seems in disagreement with a relatively high metal content of the enstatite chondrites, the meteorite type to which WT24, classified as an E-type [Lazzarin et al. 2004 A&A 425L, 25L], has been spectrally associated. Using a three-dimensional model and spin vector based on radar observations [Busch et al. 2008 Icarus 197, 375B], our TPM produces a higher best-fitting value of the thermal inertia. We also find the intriguing possibility that the hemisphere of WT24 dominated by concave terrains, possibly be the result of an impact crater, has a higher thermal inertia. This would be similar to the case of our Moon

  17. New analysis indicates no thermal inversion in the atmosphere of HD 209458b

    International Nuclear Information System (INIS)

    Diamond-Lowe, Hannah; Stevenson, Kevin B.; Bean, Jacob L.; Line, Michael R.; Fortney, Jonathan J.

    2014-01-01

    An important focus of exoplanet research is the determination of the atmospheric temperature structure of strongly irradiated gas giant planets, or hot Jupiters. HD 209458b is the prototypical exoplanet for atmospheric thermal inversions, but this assertion does not take into account recently obtained data or newer data reduction techniques. We reexamine this claim by investigating all publicly available Spitzer Space Telescope secondary-eclipse photometric data of HD 209458b and performing a self-consistent analysis. We employ data reduction techniques that minimize stellar centroid variations, apply sophisticated models to known Spitzer systematics, and account for time-correlated noise in the data. We derive new secondary-eclipse depths of 0.119% ± 0.007%, 0.123% ± 0.006%, 0.134% ± 0.035%, and 0.215% ± 0.008% in the 3.6, 4.5, 5.8, and 8.0 μm bandpasses, respectively. We feed these results into a Bayesian atmospheric retrieval analysis and determine that it is unnecessary to invoke a thermal inversion to explain our secondary-eclipse depths. The data are well fitted by a temperature model that decreases monotonically between pressure levels of 1 and 0.01 bars. We conclude that there is no evidence for a thermal inversion in the atmosphere of HD 209458b.

  18. [Prevalence of malnutrition, interventions and quality indicators in German nursing homes - first results of a nationwide pilot study].

    Science.gov (United States)

    Bartholomeyczik, S; Reuther, S; Luft, L; van Nie, N; Meijers, J; Schols, J; Halfens, R

    2010-12-01

    The aims of this study were to test the transfer and feasibility of a Dutch annual survey on malnutrition into German nursing homes and to gather first data about the prevalence of malnutrition, treatment and quality indicators in German resident homes. A cross-sectional multicentre study, using a standardised multilevel instrument (observation, questionnaire) developed in the University of Maastricht was applied. Variables are indicators for malnutrition and its risks, quality indicators, care dependency and treatment initiatives. The sample consisted of 32 nursing homes with 2,444 participating residents. 26% of the residents show indicators of malnutrition, a risk of malnutrition can be found in another 28%. Only one quarter of the nursing homes use a standardised nutritional screening instrument. Significantly more people with dementia have indicators of malnutrition. Most facilities provide a protocol or a guideline for the prevention and treatment of malnutrition. Also most are training their staff regularly in questions of malnutrition, half the institutions employ dieticians or nutritionists. Special treatment was initiated in half of all residents having indicators of malnutrition or showing a risk. The Dutch instrument is applicable in German nursing homes. Its utilisation shows that malnutrition is still a problem in German nursing homes. The standardised assessment of nutritional status is the exception; the interventions carried out should be improved.

  19. Prevalence of Invalid Performance on Baseline Testing for Sport-Related Concussion by Age and Validity Indicator.

    Science.gov (United States)

    Abeare, Christopher A; Messa, Isabelle; Zuccato, Brandon G; Merker, Bradley; Erdodi, Laszlo

    2018-03-12

    Estimated base rates of invalid performance on baseline testing (base rates of failure) for the management of sport-related concussion range from 6.1% to 40.0%, depending on the validity indicator used. The instability of this key measure represents a challenge in the clinical interpretation of test results that could undermine the utility of baseline testing. To determine the prevalence of invalid performance on baseline testing and to assess whether the prevalence varies as a function of age and validity indicator. This retrospective, cross-sectional study included data collected between January 1, 2012, and December 31, 2016, from a clinical referral center in the Midwestern United States. Participants included 7897 consecutively tested, equivalently proportioned male and female athletes aged 10 to 21 years, who completed baseline neurocognitive testing for the purpose of concussion management. Baseline assessment was conducted with the Immediate Postconcussion Assessment and Cognitive Testing (ImPACT), a computerized neurocognitive test designed for assessment of concussion. Base rates of failure on published ImPACT validity indicators were compared within and across age groups. Hypotheses were developed after data collection but prior to analyses. Of the 7897 study participants, 4086 (51.7%) were male, mean (SD) age was 14.71 (1.78) years, 7820 (99.0%) were primarily English speaking, and the mean (SD) educational level was 8.79 (1.68) years. The base rate of failure ranged from 6.4% to 47.6% across individual indicators. Most of the sample (55.7%) failed at least 1 of 4 validity indicators. The base rate of failure varied considerably across age groups (117 of 140 [83.6%] for those aged 10 years to 14 of 48 [29.2%] for those aged 21 years), representing a risk ratio of 2.86 (95% CI, 2.60-3.16; P validity indicator and the age of the examinee. The strong age association, with 3 of 4 participants aged 10 to 12 years failing validity indicators, suggests that

  20. Evaluating the impact of the carbon dioxide capturing process on the indices of economic efficiency in thermal power plants

    International Nuclear Information System (INIS)

    Marukhyan, V.Z.; Elbakyan, S.H.

    2017-01-01

    Taking into account the input of carbon dioxide as a greenhouse gas in the global warming process, the technological solutions of its capturing, and the implementation possibilities in environmentally safe thermal power plants are considered. In power plants equipped with effective systems for cleaning the fuel gas and the coal gasification, the influence of the CO 2 reduction and realization of quotes on the indices of economic efficiency is estimated

  1. Serum antibodies and DNA indicate a high prevalence of equine papillomavirus 2 (EcPV2) among horses in Switzerland.

    Science.gov (United States)

    Fischer, Nina M; Favrot, Claude; Birkmann, Katharina; Jackson, Michele; Schwarzwald, Colin C; Müller, Martin; Tobler, Kurt; Geisseler, Marco; Lange, Christian E

    2014-06-01

    The DNA of equine papillomavirus type 2 (EcPV2) is consistently found in equine papillomas and squamous cell carcinomas, indicating a causal association of EcPV2 in the pathogenesis of these tumours; however, little is known about the prevalence of this virus. The aim of this study was to determine the geno- and seroprevalence of EcPV2 in clinically healthy horses in Switzerland. Fifty horses presented to the equine department of the university clinic, displaying no skin or mucous membrane lesions or severe signs of other diseases, were sampled. Cytobrush samples from the penis or vulva and serum samples were collected. To determine the genoprevalence of EcPV2, DNA was extracted from cytobrush samples and tested for viral DNA with a PCR assay amplifying a 338 bp fragment of the E7/E1 region of the viral genome. Seroprevalence was tested using an enzyme-linked immunosorbent assay aimed to detect antibodies against the major capsid protein (L1) of EcPV2. In five of 50 horses (10%), EcPV2-specific DNA was amplified but no antibodies could be detected, whereas in 14 of 50 horses (28%), antibodies against EcPV2 but no DNA were demonstrated. Both antibodies and viral DNA were detected in four of 50 horses (8%). Neither antibodies nor viral DNA were found in 27 of 50 horses (54%). The seroprevalence suggests that EcPV2 is prevalent in the Swiss equine population, while the genoprevalence indicates that currently ongoing infections are less common. The discrepancy between geno- and seroprevalence probably indicates different stages of infection in the tested cohort. © 2014 ESVD and ACVD.

  2. The prevalence of weight – controlling attitude and eating disorders and their association with anthropometric indices in female adolescent students

    Directory of Open Access Journals (Sweden)

    mohamad hasan Eftekhari

    2015-01-01

    Full Text Available Background : Adolescence is one of the most critical growth periods in the human's life. Eating disorder is one of the most common nutritional-psychological disorders in this period, which can lead to acute and chronic physical and mental problems. Therefore, regarding the importance of the topic, the present study was designed to determine the prevalence of weight – controlling attitude and eating disorders, and their association with anthropometric indices in female adolescent school students. Materials and Methods: The present study was a cross-sectional descriptive analytical study. 594 high school adolescent girls were selected using multi-stage random sampling method. Nutritional attitude was assessed by use of a nutritional attitude questionnaire. Another specific questionnaire was used to gather demographic and anthropometric information. Data analysis was done using SPSS software, independent t- test and Chi-square (P˂0.05. Results: The information shows that 80% of the studied population are at risk of eating disorders. The number of the obese , over weight and underweight students were significantly more in the group with nutritional attitude disorders. Conclusion: Due to the high prevalence of eating disorders in adolescent girls, and the concomitant obesity and underweight with these disorders, the correction of these attitude could be mentioned as a health priority in this city

  3. Thermal input control and enhancement for laser based residual stress measurements using liquid temperature indicating coatings

    Science.gov (United States)

    Pechersky, Martin J.

    1999-01-01

    An improved method for measuring residual stress in a material comprising the steps of applying a spot of temperature indicating coating to the surface to be studied, establishing a speckle pattern surrounds the spot of coating with a first laser then heating the spot of coating with a far infrared laser until the surface plastically deforms. Comparing the speckle patterns before and after deformation by subtracting one pattern from the other will produce a fringe pattern that serves as a visual and quantitative indication of the degree to which the plasticized surface responded to the stress during heating and enables calculation of the stress.

  4. Thermal comfort in Quebec City, Canada: sensitivity analysis of the UTCI and other popular thermal comfort indices in a mid-latitude continental city.

    Science.gov (United States)

    Provençal, Simon; Bergeron, Onil; Leduc, Richard; Barrette, Nathalie

    2016-04-01

    The newly developed Universal Thermal Climate Index (UTCI), along with the physiological equivalent temperature (PET), the humidex (HX) and the wind chill index (WC), was calculated in Quebec City, Canada, a city with a strong seasonal climatic variability, over a 1-year period. The objective of this study is twofold: evaluate the operational benefits of implementing the UTCI for a climate monitoring program of public comfort and health awareness as opposed to relying on traditional and simple indices, and determine whether thermal comfort monitoring specific to dense urban neighborhoods is necessary to adequately fulfill the goals of the program. In order to do so, an analysis is performed to evaluate each of these indices' sensitivity to the meteorological variables that regulate them in different environments. Overall, the UTCI was found to be slightly more sensitive to mean radiant temperature, moderately more sensitive to humidity and much more sensitive to wind speed than the PET. This dynamic changed slightly depending on the environment and the season. In hot weather, the PET was found to be more sensitive to mean radiant temperature and therefore reached high values that could potentially be hazardous more frequently than the UTCI and the HX. In turn, the UTCI's stronger sensitivity to wind speed makes it a superior index to identify potentially hazardous weather in winter compared to the PET and the WC. Adopting the UTCI broadly would be an improvement over the traditionally popular HX and WC indices. The urban environment produced favorable conditions to sustain heat stress conditions, where the indices reached high values more frequently there than in suburban locations, which advocates for weather monitoring specific to denser urban areas.

  5. A probabilistic modeling approach in thermal inactivation: estimation of postprocess Bacillus cereus spore prevalence and concentration

    NARCIS (Netherlands)

    Membre, J.M.; Amezquita, A.; Bassett, J.; Giavedoni, P.; Blackburn, W.; Gorris, L.G.M.

    2006-01-01

    The survival of spore-forming bacteria is linked to the safety and stability of refrigerated processed foods of extended durability (REPFEDs). A probabilistic modeling approach was used to assess the prevalence and concentration of Bacillus cereus spores surviving heat treatment for a semiliquid

  6. Acceptance, Prevalence and Indications for Robot-Assisted Laparoscopy - Results of a Survey Among Urologists in Germany, Austria and Switzerland.

    Science.gov (United States)

    Imkamp, Florian; Herrmann, Thomas R W; Tolkach, Yuri; Dziuba, Sebastian; Stolzenburg, Jens U; Rassweiler, Jens; Sulser, Tullio; Zimmermann, Uwe; Merseburger, Axel S; Kuczyk, Markus A; Burchardt, Martin

    2015-01-01

    Robotic-assisted laparoscopy (RAL) is being widely accepted in the field of urology as a replacement for conventional laparoscopy (CL). Nevertheless, the process of its integration in clinical routines has been rather spontaneous. To determine the prevalence of robotic systems (RS) in urological clinics in Germany, Austria and Switzerland, the acceptance of RAL among urologists as a replacement for CL and its current use for 25 different urological indications. To elucidate the practice patterns of RAL, a survey at hospitals in Germany, Austria and Switzerland was conducted. All surgically active urology departments in Germany (303), Austria (37) and Switzerland (84) received a questionnaire with questions related to the one-year period prior to the survey. The response rate was 63%. Among the participants, 43% were universities, 45% were tertiary care centres, and 8% were secondary care hospitals. A total of 60 RS (Germany 35, Austria 8, Switzerland 17) were available, and the majority (68%) were operated under public ownership. The perception of RAL and the anticipated superiority of RAL significantly differed between robotic and non-robotic surgeons. For only two urologic indications were more than 50% of the procedures performed using RAL: pyeloplasty (58%) and transperitoneal radical prostatectomy (75%). On average, 35% of robotic surgeons and only 14% of non-robotic surgeons anticipated RAL superiority in some of the 25 indications. This survey provides a detailed insight into RAL implementation in Germany, Austria and Switzerland. RAL is currently limited to a few urological indications with a small number of high-volume robotic centres. These results might suggest that a saturation of clinics using RS has been achieved but that the existing robotic capacities are being utilized ineffectively. The possible reasons for this finding are discussed, and certain strategies to solve these problems are offered. © 2015 S. Karger AG, Basel.

  7. CHANGES OF SELECTED PHYSIOLOGICAL INDICES IN MEN UNDER THE INFLUENCE OF THERMAL HEATING AND COOLING

    Directory of Open Access Journals (Sweden)

    Prystupa Tetyana

    2010-01-01

    Full Text Available The research objective is defining the influence of exposure to heat during the Finnish sauna treatment in the morning hours on selected physiological indices in men, who were monitored during a series of three sauna treatments in a row. 74 healthy men took part in the studies. Body weight and its composition was diagnosed with the help of TANITA BODY COMPOSITION ANALYZER TBF-300 based on bioelectrical impedance analysis. The conducted research confirm the hypothesis about the positive effect of the Finnish sauna on the body mass components, such as body mass, BMI, TBW (kg and % body fat.

  8. Aging Mechanisms and Nondestructive Aging Indicator of Filled Cross-linked Polyethylene (XLPE) Exposed to Simultaneous Thermal and Gamma Radiation

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Shuaishuai; Fifield, Leonard S.; Bowler, Nicola

    2018-04-11

    Aging mechanisms and a nondestructive aging indicator of filled cross-linked polyethylene (XLPE) cable insulation material used in nuclear power plants (NPPs) are studied. Using various material characterization techniques, likely candidates and functions for the main additives in a commercial filled-XLPE insulation material have been identified. These include decabromodiphenyl ether and Sb2O3 as flame retardants, ZnS as white pigment and polymerized 1,2-dihydro-2,2,4-trimethylquinoline as antioxidant. Gas chromatography-mass spectrometry, differential scanning calorimetry, oxidation induction time and measurements of dielectric loss tangent are utilized to monitor property changes as a function of thermal and radiation exposure of the cable material. Small-molecular-weight hydrocarbons are evolve with gamma radiation aging at 90 °C. The level of antioxidant decreases with aging by volatilization and chemical reaction with free radicals. Thermal aging at 90 °C for 25 days or less causes no observable change to the cross-linked polymer structure. Gamma radiation causes damage to crystalline polymer regions and introduces defects. Dielectric loss tangent is shown to be an effective and reliable nondestructive indicator of the aging severity of the filled-XLPE insulation material.

  9. Feasibility and validity of animal-based indicators for on-farm welfare assessment of thermal stress in dairy goats

    Science.gov (United States)

    Battini, Monica; Barbieri, Sara; Fioni, Luna; Mattiello, Silvana

    2016-02-01

    This investigation tested the feasibility and validity of indicators of cold and heat stress in dairy goats for on-farm welfare assessment protocols. The study was performed on two intensive dairy farms in Italy. Two different 3-point scale (0-2) scoring systems were applied to assess cold and heat stress. Cold and heat stress scores were visually assessed from outside the pen in the morning, afternoon and evening in January-February, April-May and July 2013 for a total of nine sessions of observations/farm. Temperature (°C), relative humidity (%) and wind speed (km/h) were recorded and Thermal Heat Index (THI) was calculated. The sessions were allocated to three climatic seasons, depending on THI ranges: cold (65). Score 2 was rarely assessed; therefore, scores 1 and 2 were aggregated for statistical analysis. The amount of goats suffering from cold stress was significantly higher in the cold season than in neutral ( P < 0.01) and hot ( P < 0.001) seasons. Signs of heat stress were recorded only in the hot season ( P < 0.001). The visual assessment from outside the pen confirms the on-farm feasibility of both indicators: No constraint was found and time required was less than 10 min. Our results show that cold and heat stress scores are valid indicators to detect thermal stress in intensively managed dairy goats. The use of a binary scoring system (presence/absence), merging scores 1 and 2, may be a further refinement to improve the feasibility. This study also allows the prediction of optimal ranges of THI for dairy goat breeds in intensive husbandry systems, setting a comfort zone included into 55 and 70.

  10. The prevalence and risk indicators of uncorrected refractive error and unmet refractive need in Latinos: the Los AngelesLatino Eye Study.

    Science.gov (United States)

    Varma, Rohit; Wang, Michelle Y; Ying-Lai, Mei; Donofrio, Jill; Azen, Stanley P

    2008-12-01

    To determine the age- and sex-specific prevalence and risk indicators of uncorrected refractive error and unmet refractive need among a population-based sample of Latino adults. Self-identified Latinos 40 years of age and older (n = 6129) from six census tracts in La Puente, California, underwent a complete ophthalmic examination, and a home-administered questionnaire provided self-reported data on potential risk indicators. Uncorrected refractive error was defined as a >or=2-line improvement with refraction in the better seeing eye. Unmet refractive need was defined as having or=20/40 after refraction (definition 1) or having or=2-line improvement with refraction (definition 2). Sex- and age-specific prevalence and significant risk indicators for uncorrected refractive error and unmet refractive need were calculated. The overall prevalence of uncorrected refractive error was 15.1% (n = 926). The overall prevalence of unmet refractive need was 8.9% (n = 213, definition 1) and 9.6% (n = 218, definition 2). The prevalence of uncorrected refractive error and either definition of unmet refractive need increased with age (P refractive error and unmet refractive need. The data suggest that the prevalence of uncorrected refractive error and unmet refractive need is high in Latinos of primarily Mexican ancestry. Better education and access to care in older Latinos are likely to decrease the burden of uncorrected refractive error in Latinos.

  11. Sex Differences in Prevalence and Risk Indicators of Geriatric Depression: The Shih-Pai Community-based Survey

    Directory of Open Access Journals (Sweden)

    Jiunn-Kae Wang

    2010-05-01

    Conclusion: Women have a higher prevalence of geriatric depression than men. Our data support the differential exposure hypothesis and the differential vulnerability hypothesis of sex difference in geriatric depression.

  12. Prevalence of obesity, central obesity, and associated socio-demographic variables in Syrian women using different anthropometric indicators

    OpenAIRE

    Bakir M Adel; Hammad Kholoud; Mohammad Loreen

    2017-01-01

    The prevalence of overweight and obesity is increasing globally in both developing and developed countries, especially, those with rapid cultural and social changes. The aims of current study were twofold: (a) to examine, for the first time in Syria, the prevalence of overweight, obesity and central obesity in Syrian women and obesity-related socio-demographic determinants, and (b) to establish a base line data about obesity related determinants needed to develop appropriate treatment and pre...

  13. Prevalence, incidence, indication, and choice of antidepressants in patients with and without chronic kidney disease: a matched cohort study in UK Clinical Practice Research Datalink.

    Science.gov (United States)

    Iwagami, Masao; Tomlinson, Laurie A; Mansfield, Kathryn E; McDonald, Helen I; Smeeth, Liam; Nitsch, Dorothea

    2017-07-01

    People with chronic kidney disease (CKD) have an increased prevalence of depression, anxiety, and neuropathic pain. We examined prevalence, incidence, indication for, and choice of antidepressants among patients with and without CKD. Using the UK Clinical Practice Research Datalink, we identified patients with CKD (two measurements of estimated glomerular filtration rate antidepressant prescribing in the six months prior to index date (prevalence), the first prescription after index date among non-prevalent users (incidence), and recorded diagnoses (indication). We compared antidepressant choice between patients with and without CKD among patients with a diagnosis of depression. There were 242 349 matched patients (median age 76 [interquartile range 70-82], male 39.3%) with and without CKD. Prevalence of antidepressant prescribing was 16.3 and 11.9%, and incidence was 57.2 and 42.4/1000 person-years, in patients with and without CKD, respectively. After adjusting for confounders, CKD remained associated with higher prevalence and incidence of antidepressant prescription. Regardless of CKD status, selective serotonin reuptake inhibitors were predominantly prescribed for depression or anxiety, while tricyclic antidepressants were prescribed for neuropathic pain or other reasons. Antidepressant choice was similar in depressed patients with and without CKD. The rate of antidepressant prescribing was nearly one and a half times higher among people with CKD than in the general population. © 2017 The Authors. Pharmacoepidemiology & Drug Safety Published by John Wiley & Sons Ltd. © 2017 The Authors. Pharmacoepidemiology & Drug Safety Published by John Wiley & Sons Ltd.

  14. The prevalence and risk indicators of symptoms of common mental disorders among current and former Dutch elite athletes

    NARCIS (Netherlands)

    Gouttebarge, Vincent; Jonkers, Ruud; Moen, Maarten; Verhagen, Evert; Wylleman, Paul; Kerkhoffs, Gino

    2017-01-01

    The aim of the study was to determine the prevalence and comorbidity of symptoms of common mental disorders (distress, anxiety/depression, sleep disturbance, eating disorders, adverse alcohol use) among current and former Dutch elite athletes, and to explore the inference between potential risk

  15. Prevalence of signs and symptoms indicative of temporomandibular disorders and headaches in 35-, 50-, 65- and 75-year-olds living in Västerbotten, Sweden.

    Science.gov (United States)

    Yekkalam, Negin; Wänman, Anders

    2014-08-01

    The aim of this study was to analyze and compare prevalence of signs and frequently occurring symptoms indicative of temporomandibular disorder (TMD) and headaches in 35-, 50-, 65- and 75-year-old men and women in Västerbotten County, Sweden. From a total target population of 11 324 subjects living in Västerbotten County in the year 2002, 300 individuals in each age group were randomly selected. Of these, 998 (82% response rate) answered and returned a postal questionnaire and 779 (65% response rate) individuals accepted a clinical examination. The prevalence of frequent TMD symptoms peaked among 50-year-old women and then declined. Women at this age reported significantly higher prevalence compared to men for all TMD symptoms except temporomandibular joint locking. In the 65- and 75-year-olds, the prevalence was practically equal between men and women as well as between these ages. Frequent headaches showed the highest prevalence among 35- and 50-year-old women, with a statistically significant difference between men and women of 50 years of age (p temporomandibular joint sounds (p headaches showed a similar pattern, with higher prevalence among the 35- and 50-year-old, as compared to the 65- and 75-year-old, participants. The pattern may be related to biological, psychosocial or generation-related factors.

  16. New Indices of Endothelial Function Measured by Digital Thermal Monitoring of Vascular Reactivity: Data from 6084 Patients Registry

    Directory of Open Access Journals (Sweden)

    Morteza Naghavi

    2016-01-01

    Full Text Available Background. Endothelial function is viewed as a barometer of cardiovascular health and plays a central role in vascular reactivity. Several studies showed digital thermal monitoring (DTM as a simple noninvasive method to measure vascular reactivity that is correlated with atherosclerosis risk factors and coronary artery disease. Objectives. To further evaluate the relations between patient characteristics and DTM indices in a large patient registry. Methods. DTM measures were correlated with age, sex, heart rate, and systolic and diastolic blood pressure in 6084 patients from 18 clinics. Results. DTM vascular reactivity index (VRI was normally distributed and inversely correlated with age (r=-0.21, p<0.0001. Thirteen percent of VRI tests were categorized as poor vascular reactivity (VRI < 1.0, 70 percent as intermediate (1.0 ≤ VRI < 2.0, and 17 percent as good (VRI ≥ 2.0. Poor VRI (<1.0 was noted in 6% of <50 y, 10% of 50–70 y, and 18% of ≥70 y. In multiple linear regression analyses, age, sex, and diastolic blood pressure were significant but weak predictors of VRI. Conclusions. As the largest database of finger-based vascular reactivity measurement, this report adds to prior findings that VRI is a meaningful physiological marker and reflects a high level of residual risk found in patients currently under care.

  17. Colorimetric Detection of Caspase 3 Activity and Reactive Oxygen Derivatives: Potential Early Indicators of Thermal Stress in Corals

    Directory of Open Access Journals (Sweden)

    Mickael Ros

    2016-01-01

    Full Text Available There is an urgent need to develop and implement rapid assessments of coral health to allow effective adaptive management in response to coastal development and global change. There is now increasing evidence that activation of caspase-dependent apoptosis plays a key role during coral bleaching and subsequent mortality. In this study, a “clinical” approach was used to assess coral health by measuring the activity of caspase 3 using a commercial kit. This method was first applied while inducing thermal bleaching in two coral species, Acropora millepora and Pocillopora damicornis. The latter species was then chosen to undergo further studies combining the detection of oxidative stress-related compounds (catalase activity and glutathione concentrations as well as caspase activity during both stress and recovery phases. Zooxanthellae photosystem II (PSII efficiency and cell density were measured in parallel to assess symbiont health. Our results demonstrate that the increased caspase 3 activity in the coral host could be detected before observing any significant decrease in the photochemical efficiency of PSII in the algal symbionts and/or their expulsion from the host. This study highlights the potential of host caspase 3 and reactive oxygen species scavenging activities as early indicators of stress in individual coral colonies.

  18. Soft and Hard Textured Wheat Differ in Starch Properties as Indicated by Trimodal Distribution, Morphology, Thermal and Crystalline Properties.

    Directory of Open Access Journals (Sweden)

    Rohit Kumar

    Full Text Available Starch and proteins are major components in the wheat endosperm that affect its end product quality. Between the two textural classes of wheat i.e. hard and soft, starch granules are loosely bound with the lipids and proteins in soft wheat due to higher expression of interfering grain softness proteins. It might have impact on starch granules properties. In this work for the first time the physiochemical and structural properties of different sized starch granules (A-, B- and C-granules were studied to understand the differences in starches with respect to soft and hard wheat. A-, B- and C-type granules were separated with >95% purity. Average number and proportion of A-, B-, and C-type granules was 18%, 56%, 26% and 76%, 19%, 5% respectively. All had symmetrical birefringence pattern with varied intensity. All displayed typical A-type crystallites. A-type granules also showed V-type crystallinity that is indicative of starch complexes with lipids and proteins. Granules differing in gelatinization temperature (ΔH and transition temperature (ΔT, showed different enthalpy changes during heating. Substitution analysis indicated differences in relative substitution pattern of different starch granules. Birefringence, percentage crystallinity, transmittance, gelatinization enthalpy and substitution decreased in order of A>B>C being higher in hard wheat than soft wheat. Amylose content decreased in order of A>B>C being higher in soft wheat than hard wheat. Reconstitution experiment showed that starch properties could be manipulated by changing the composition of starch granules. Addition of A-granules to total starch significantly affected its thermal properties. Effect of A-granule addition was higher than B- and C-granules. Transmittance of the starch granules paste showed that starch granules of hard wheat formed clear paste. These results suggested that in addition to differences in protein concentration, hard and soft wheat lines have

  19. Primary productivity, heterotrophy, metabolic indicators of stress and interactions in algal-bacterial mat communities affected by a fluctuating thermal regime

    International Nuclear Information System (INIS)

    Tison, D.L.

    1980-01-01

    Thermal habitats in effluent cooling waters from production nuclear reactors at the Savannah River Plant are unlike natural thermal habitats in that reactor operations are periodically halted, exposing the organisms growing in these thermal habitats to ambient temperatures for unpredictable lengths of time. Rates of primary production, glucose heterotrophy, and the composition of algal-bacterial mat communities growing along a thermal gradient from about 50 to 35 0 C during periods of reactor operation were studied. Cyanobacteria were the only photoautotrophs in mat communities above 40 0 C while cyanobacteria and eucaryotic algae comprised the photoautotrophic component of mat communities below 40 0 C. The heterotrophic component of these communities above 40 0 C was made up of stenothermic and eurythermic thermophilic bacteria while both eurythermic thermophiles and mesophilic bacteria were found in communities below 40 0 C. Net CO 2 -fixation rates during thermal conditions dropped after initial exposure to ambient temperatures. After prolonged exposure of the thermal communities to ambient temperatures, adaptation and colonization by mesophilic algae occurred. Rates of glucose utilization under varying degrees of thermal influence suggested that the heterotrophic component may not have been optimally adapted to thermal conditions. During periods of changing thermal conditions, an increase in the percentage extracellular release of photosynthetically fixed 14 CO 2 by cyanobacteria and algae and an increase in the percentage of glucose mineralized (respired) by the heterotrophic component of the mat communities was observed. Results of temperature shift experiments indicated that the short-term response of the photoautotrophic component of these communities to thermal stress was an increase in the percentage of photosynthate released extracellularly

  20. Geostatistical modelling of malaria indicator survey data to assess the effects of interventions on the geographical distribution of malaria prevalence in children less than 5 years in Uganda.

    Science.gov (United States)

    Ssempiira, Julius; Nambuusi, Betty; Kissa, John; Agaba, Bosco; Makumbi, Fredrick; Kasasa, Simon; Vounatsou, Penelope

    2017-01-01

    Malaria burden in Uganda has declined disproportionately among regions despite overall high intervention coverage across all regions. The Uganda Malaria Indicator Survey (MIS) 2014-15 was the second nationally representative survey conducted to provide estimates of malaria prevalence among children less than 5 years, and to track the progress of control interventions in the country. In this present study, 2014-15 MIS data were analysed to assess intervention effects on malaria prevalence in Uganda among children less than 5 years, assess intervention effects at regional level, and estimate geographical distribution of malaria prevalence in the country. Bayesian geostatistical models with spatially varying coefficients were used to determine the effect of interventions on malaria prevalence at national and regional levels. Spike-and-slab variable selection was used to identify the most important predictors and forms. Bayesian kriging was used to predict malaria prevalence at unsampled locations. Indoor Residual Spraying (IRS) and Insecticide Treated Nets (ITN) ownership had a significant but varying protective effect on malaria prevalence. However, no effect was observed for Artemisinin Combination-based Therapies (ACTs). Environmental factors, namely, land cover, rainfall, day and night land surface temperature, and area type were significantly associated with malaria prevalence. Malaria prevalence was higher in rural areas, increased with the child's age, and decreased with higher household socioeconomic status and higher level of mother's education. The highest prevalence of malaria in children less than 5 years was predicted for regions of East Central, North East and West Nile, whereas the lowest was predicted in Kampala and South Western regions, and in the mountainous areas in Mid-Western and Mid-Eastern regions. IRS and ITN ownership are important interventions against malaria prevalence in children less than 5 years in Uganda. The varying effects of the

  1. Geostatistical modelling of malaria indicator survey data to assess the effects of interventions on the geographical distribution of malaria prevalence in children less than 5 years in Uganda.

    Directory of Open Access Journals (Sweden)

    Julius Ssempiira

    Full Text Available Malaria burden in Uganda has declined disproportionately among regions despite overall high intervention coverage across all regions. The Uganda Malaria Indicator Survey (MIS 2014-15 was the second nationally representative survey conducted to provide estimates of malaria prevalence among children less than 5 years, and to track the progress of control interventions in the country. In this present study, 2014-15 MIS data were analysed to assess intervention effects on malaria prevalence in Uganda among children less than 5 years, assess intervention effects at regional level, and estimate geographical distribution of malaria prevalence in the country.Bayesian geostatistical models with spatially varying coefficients were used to determine the effect of interventions on malaria prevalence at national and regional levels. Spike-and-slab variable selection was used to identify the most important predictors and forms. Bayesian kriging was used to predict malaria prevalence at unsampled locations.Indoor Residual Spraying (IRS and Insecticide Treated Nets (ITN ownership had a significant but varying protective effect on malaria prevalence. However, no effect was observed for Artemisinin Combination-based Therapies (ACTs. Environmental factors, namely, land cover, rainfall, day and night land surface temperature, and area type were significantly associated with malaria prevalence. Malaria prevalence was higher in rural areas, increased with the child's age, and decreased with higher household socioeconomic status and higher level of mother's education. The highest prevalence of malaria in children less than 5 years was predicted for regions of East Central, North East and West Nile, whereas the lowest was predicted in Kampala and South Western regions, and in the mountainous areas in Mid-Western and Mid-Eastern regions.IRS and ITN ownership are important interventions against malaria prevalence in children less than 5 years in Uganda. The varying

  2. Prevalence and risk indicators of gingivitis and periodontitis in a multi-centre study in North Jordan: a cross sectional study.

    Science.gov (United States)

    Ababneh, Khansa Taha; Abu Hwaij, Zafer Mohammad Faisal; Khader, Yousef S

    2012-01-03

    There are limited data about the epidemiology and risk factors/indicators of gingivitis, aggressive periodontitis (AgP) and chronic periodontitis (CP) in Jordan. The aim of this study was to assess the prevalence and risk indicators of gingivitis, AgP and CP. A sample of 595 subjects was randomly selected from subjects escorting out-patients attending a Medical Center, a Dental Teaching Hospital, and 2 private dental clinics. The socio-demographic variables, oral hygiene habits, income, smoking and Body Mass Index (BMI) were recorded. Full mouth periodontal examination was performed, and radiographs were taken for sites with probing depth > 3 mm. About 76% had gingivitis, 2.2% had AgP and 5.5% had CP. Periodontitis was more frequent among males than females with a M: F ratio of 1.6:1 and the prevalence increased with age. Subjects who reported not using a tooth brush, smokers and subjects with BMI > 30 kg/m2 had significantly higher prevalence of periodontitis. The risk for periodontitis was greater among subjects who reported positive family history and subjects with ≤ 12 years of education. This is the first study to report on the prevalence of gingivitis, CP and AgP in North Jordanian. Age, low education, low frequency of tooth brushing and family history were significantly associated with increased risk of periodontitis.

  3. Prevalence and risk indicators of gingivitis and periodontitis in a Multi-Centre study in North Jordan: a cross sectional study

    Science.gov (United States)

    2012-01-01

    Background There are limited data about the epidemiology and risk factors/indicators of gingivitis, aggressive periodontitis (AgP) and chronic periodontitis (CP) in Jordan. The aim of this study was to assess the prevalence and risk indicators of gingivitis, AgP and CP. Methods A sample of 595 subjects was randomly selected from subjects escorting out-patients attending a Medical Center, a Dental Teaching Hospital, and 2 private dental clinics. The socio-demographic variables, oral hygiene habits, income, smoking and Body Mass Index (BMI) were recorded. Full mouth periodontal examination was performed, and radiographs were taken for sites with probing depth > 3 mm. Results About 76% had gingivitis, 2.2% had AgP and 5.5% had CP. Periodontitis was more frequent among males than females with a M: F ratio of 1.6:1 and the prevalence increased with age. Subjects who reported not using a tooth brush, smokers and subjects with BMI > 30 kg/m2 had significantly higher prevalence of periodontitis. The risk for periodontitis was greater among subjects who reported positive family history and subjects with ≤ 12 years of education. Conclusions This is the first study to report on the prevalence of gingivitis, CP and AgP in North Jordanian. Age, low education, low frequency of tooth brushing and family history were significantly associated with increased risk of periodontitis. PMID:22214223

  4. Prevalence of key care indicators of pressure injuries, incontinence, malnutrition, and falls among older adults living in nursing homes in New Zealand.

    Science.gov (United States)

    Carryer, Jenny; Weststrate, Jan; Yeung, Polly; Rodgers, Vivien; Towers, Andy; Jones, Mark

    2017-12-01

    Pressure injuries, incontinence, malnutrition, and falls are important indicators of the quality of care in healthcare settings, particularly among older people, but there is limited information on their prevalence in New Zealand (NZ). The aim of this study was to establish the prevalence of these four problems among older people in nursing home facilities. The cross-sectional study was an analysis of data collected on a single day for the 2016 National Care Indicators Programme-New Zealand (NCIP-NZ). The sample included 276 people ages 65 and older who were residents in 13 nursing home facilities in a geographically diverse area of central NZ. Data were analyzed with descriptive statistics. Prevalence rates in these nursing home settings was pressure injuries 8%; urinary incontinence 57%; fecal incontinence 26%; malnutrition 20%, and falls 13%, of which half resulted in injuries. As people age, complex health issues can lead to increasing care dependency and more debilitating and costly health problems. Measuring the prevalence of basic care problems in NZ healthcare organizations and contributing to a NZ database can enable monitoring of the effectiveness of national and international guidelines. © 2017 Wiley Periodicals, Inc.

  5. Noninvasive Warning Indicator of the Red Zone of Potential Thermal Injury and Performance Impairment: A Pilot Study

    National Research Council Canada - National Science Library

    Yokota, Miyo; Moran, Daniel; Berglund, Larry; Stephenson, Lou; Kolka, Margaret

    2005-01-01

    The guidelines for assessing worker's level of heat strain in order to prevent thermal injury and performance impairment has been widely adapted in industries to promote workers' health and safety. Core temperature (Tcore...

  6. Prevalence of key breastfeeding indicators in 29 sub-Saharan African countries: a meta-analysis of demographic and health surveys (2010–2015)

    Science.gov (United States)

    Issaka, Abukari Ibrahim; Agho, Kingsley Emwinyore; Renzaho, Andre MN

    2017-01-01

    Objectives To carry out a meta-analysis to assess the prevalence of four key breastfeeding indicators in four subregions of 29 sub-Saharan African countries. Design, settings and participants The 29 countries were categorised into four subregions, and using cross-sectional data from the most recent Demographic and Health Surveys (2010–2015) of these countries prevalence of each of four key breastfeeding indicators was estimated for each of the subregions by carrying out a meta-analysis. Due to the presence of significant heterogeneity among the various surveys (I2>50%), a random-effect analytic model was used, and sensitivity analysis was performed to examine the effects of outliers. Main outcome variables Early initiation of breast feeding, exclusive breast feeding, predominant breast feeding and bottle feeding. Results The overall prevalence of early initiation of breast feeding varied between a lowest of 37.84% (95% CI 24.62 to 51.05) in Central Africa to a highest of 69.31% (95% CI 67.65 to 70.97) in Southern Africa; the overall prevalence of exclusive breast feeding ranged between a lowest of 23.70% (95% CI 5.37 to 42.03) in Central Africa to a highest of 56.57% (95% CI 53.50 to 59.95) in Southern Africa; the overall prevalence of predominant breast feeding ranged between a lowest of 17.63% (95% CI 12.70 to 22.55) in East Africa and a highest of 46.37% (95% CI 37.22 to 55.52) in West Africa; while the prevalence of bottle feeding varied between a lowest of 8.17% (95% CI 5.51 to 10.84) in West Africa and a highest of 30.05% (95% CI 28.42 to 31.69) in Southern Africa. Conclusions West Africa and Central Africa recorded lower overall prevalence of early initiation of breast feeding and exclusive breast feeding than the WHO’s recommended target of 50% by the year 2025. Intervention for improved breastfeeding practices in sub-Saharan Africa should target West and Central Africa, while intervention to minimise bottle feeding should target Southern Africa. PMID

  7. Evaluating the behaviour of different thermal indices by investigating various outdoor urban environments in the hot dry city of Damascus, Syria.

    Science.gov (United States)

    Yahia, Moohammed Wasim; Johansson, Erik

    2013-07-01

    Consideration of urban microclimate and thermal comfort is an absolute neccessity in urban development, and a set of guidelines for every type of climate must be elaborated. However, to develop guidelines, thermal comfort ranges need to be defined. The aim of this study was to evaluate the behaviour of different thermal indices by investigating different thermal environments in Damascus during summer and winter. A second aim was to define the lower and upper limits of the thermal comfort range for some of these indices. The study was based on comprehensive micrometeorological measurements combined with questionnaires. It was found that the thermal conditions of different outdoor environments vary considerably. In general, Old Damascus, with its deep canyons, is more comfortable in summer than modern Damascus where there is a lack of shade. Conversely, residential areas and parks in modern Damascus are more comfortable in winter due to more solar access. The neutral temperatures of both the physiologically equivalent temperature (PET) and the outdoor standard effective temperature (OUT_SET*) were found to be lower in summer than in winter. At 80 % acceptability, the study defined the lower comfort limit in winter to 21.0 °C and the upper limit in summer to 31.3 °C for PET. For OUT_SET*, the corresponding lower and upper limits were 27.6 °C and 31.3 °C respectively. OUT_SET* showed a better correlation with the thermal sensation votes than PET. The study also highlighted the influence of culture and traditions on people's clothing as well as the influence of air conditioning on physical adaptation.

  8. Using GAMM to examine inter-individual heterogeneity in thermal performance curves for Natrix natrix indicates bet hedging strategy by mothers.

    Science.gov (United States)

    Vickers, Mathew J; Aubret, Fabien; Coulon, Aurélie

    2017-01-01

    The thermal performance curve (TPC) illustrates the dependence on body- and therefore environmental- temperature of many fitness-related aspects of ectotherm ecology and biology including foraging, growth, predator avoidance, and reproduction. The typical thermal performance curve model is linear in its parameters despite the well-known, strong, non-linearity of the response of performance to temperature. In addition, it is usual to consider a single model based on few individuals as descriptive of a species-level response to temperature. To overcome these issues, we used generalized additive mixed modeling (GAMM) to estimate thermal performance curves for 73 individual hatchling Natrix natrix grass snakes from seven clutches, taking advantage of the structure of GAMM to demonstrate that almost 16% of the deviance in thermal performance curves is attributed to inter-individual variation, while only 1.3% is attributable to variation amongst clutches. GAMM allows precise estimation of curve characteristics, which we used to test hypotheses on tradeoffs thought to constrain the thermal performance curve: hotter is better, the specialist-generalist trade off, and resource allocation/acquisition. We observed a negative relationship between maximum performance and performance breadth, indicating a specialist-generalist tradeoff, and a positive relationship between thermal optimum and maximum performance, suggesting "hotter is better". There was a significant difference among matrilines in the relationship between Area Under the Curve and maximum performance - relationship that is an indicator of evenness in acquisition or allocation of resources. As we used unfed hatchlings, the observed matriline effect indicates divergent breeding strategies among mothers, with some mothers provisioning eggs unequally resulting in some offspring being better than others, while other mothers provisioned the eggs more evenly, resulting in even performance throughout the clutch. This

  9. The prevalence and distribution of indicators of fecal contamination in the sand from beaches of Oran coast

    Science.gov (United States)

    Messaoui, N.; Matallah-Boutiba, A.; Boutiba, Z.

    2017-02-01

    The microbiological quality of water at public bathing beaches is regularly monitored using fecal indicator bacteria (FIB) as a surrogate for the presence of human sewage and pathogens. The common feature of all these routine screening procedures is that the primary analysis is for indicator organisms rather than the pathogens that might cause concern. Indicator organisms are bacteria such as non-specific coliforms, Escherichia coli and Pseudomonas aeruginosa that are very commonly found in the human or animal gut and which, if detected, may suggest the presence of sewage. Indicator organisms are used because even when a person is infected with more pathogenic bacteria, they will still be excreting many millions times more indicator organisms than pathogens. It is therefore reasonable to surmise that if indicator organism levels are low, then pathogen levels will be very much lower or absent. Judgments as to suitability of water for use are based on very extensive precedents and relate to the probability of any sample population of bacteria being able to be infective at a reasonable statistical level of confidence. Exposure to FIB and associated pathogens may also occur through contact with contaminated beach sand, but no standards limiting levels of microbes in sand or required monitoring program has been established. As a result, the factors affecting FIB and pathogen survival/persistence in sand remain largely unstudied. A possible contamination of the sand by bacterial communities could be a source of transmission of certain pathogenic bacteria. The goal of this study was to look for a presence of certain bacteria that could be a source of illness to swimmers and compare the different levels of contamination between beach sand and sea water in four sites along the Western Oranian coast. First analysis were made during the dry season and rainy season from December 2010 to June 2012 to estimate fecal coliforms, Pseudomonas spp and total germs levels. E.coli and

  10. Experiment Study on Elastic Indicator of Thermal Shock Ceramic Materials——Implementation of Students’ Innovative Research Project of Shandong University of Science and Technology

    Directory of Open Access Journals (Sweden)

    Wang Yanxia

    2017-01-01

    Full Text Available In order to improve the quality of undergraduate education and combine theory and practice, Shandong University of science and technology organized innovative research activities project for undergraduates. Combined with the characteristics of engineering mechanics course, teachers of engineering mechanics teaching and research section guided students to take an active part in scientific research and innovation practice teaching, which has obtained a good teaching effect. This paper introduces the concrete implement process of the college students’ innovative scientific research project “Experiment Study on Elastic Indicator of Thermal Shock Ceramic Materials”, which measures elastic indicator of ceramics using the ultrasonic method. This paper studies elastic indicator change rule of the mullite ceramic samples under different factors such as temperature difference, thermal shock times and so on. Studies have shown that in the condition of air-cooling, with the increase of thermal shock temperature difference and thermal shock times, the elastic modulus value, shear modulus and Poisson’s ratio are in a falling trend. The project implementation have proved that implement undergraduate innovation research projects could effectively arouse students’ learning enthusiasm, cultivate students’ scientific research innovation and analytical abilities to solve practical scientific research problems.

  11. ANN multiscale model of anti-HIV drugs activity vs AIDS prevalence in the US at county level based on information indices of molecular graphs and social networks.

    Science.gov (United States)

    González-Díaz, Humberto; Herrera-Ibatá, Diana María; Duardo-Sánchez, Aliuska; Munteanu, Cristian R; Orbegozo-Medina, Ricardo Alfredo; Pazos, Alejandro

    2014-03-24

    This work is aimed at describing the workflow for a methodology that combines chemoinformatics and pharmacoepidemiology methods and at reporting the first predictive model developed with this methodology. The new model is able to predict complex networks of AIDS prevalence in the US counties, taking into consideration the social determinants and activity/structure of anti-HIV drugs in preclinical assays. We trained different Artificial Neural Networks (ANNs) using as input information indices of social networks and molecular graphs. We used a Shannon information index based on the Gini coefficient to quantify the effect of income inequality in the social network. We obtained the data on AIDS prevalence and the Gini coefficient from the AIDSVu database of Emory University. We also used the Balaban information indices to quantify changes in the chemical structure of anti-HIV drugs. We obtained the data on anti-HIV drug activity and structure (SMILE codes) from the ChEMBL database. Last, we used Box-Jenkins moving average operators to quantify information about the deviations of drugs with respect to data subsets of reference (targets, organisms, experimental parameters, protocols). The best model found was a Linear Neural Network (LNN) with values of Accuracy, Specificity, and Sensitivity above 0.76 and AUROC > 0.80 in training and external validation series. This model generates a complex network of AIDS prevalence in the US at county level with respect to the preclinical activity of anti-HIV drugs in preclinical assays. To train/validate the model and predict the complex network we needed to analyze 43,249 data points including values of AIDS prevalence in 2,310 counties in the US vs ChEMBL results for 21,582 unique drugs, 9 viral or human protein targets, 4,856 protocols, and 10 possible experimental measures.

  12. Prevalence and risk indicators of peri-implantitis in Korean patients with a history of periodontal disease: a cross-sectional study.

    Science.gov (United States)

    Goh, Mi-Seon; Hong, Eun-Jin; Chang, Moontaek

    2017-08-01

    The aim of this study was to analyze the prevalence and risk indicators of peri-implantitis in Korean patients with history of periodontal disease. A total of 444 patients with 1,485 implants were selected from patients who had been treated at the Department of Periodontology, Chonbuk National University Dental Hospital between July 2014 and June 2015. A group with a history of peri-implantitis (HP) (370 patients with 1,189 implants) and a group with a current peri-implantitis (CP) (318 patients with 1,004 implants) were created based on the radiographic and clinical assessments of implants. The prevalence of peri-implantitis was calculated at both the patient and implant levels. The influence of risk variables on the occurrence of peri-implantitis was analyzed using generalized estimating equations analysis. The prevalence of peri-implantitis in the HP and CP groups ranged from 6.7% to 19.7%. The cumulative peri-implantitis rate in the HP group estimated with the Kaplan-Meier method was higher than that in the CP group over the follow-up period. Among the patient-related risk variables, supportive periodontal therapy (SPT) was the only significant risk indicator for the occurrence of peri-implantitis in both groups. In the analysis of implant-related variables, implants supporting fixed dental prosthesis (FDP) and implants with subjective discomfort were associated with a higher prevalence of peri-implantitis than single implants and implants without subjective discomfort in the HP group. The presence of subjective discomfort was the only significant implant-related variable predictive of peri-implantitis in the CP group. Within the limitations of this study, the prevalence of peri-implantitis in Korean patients with a history of periodontal disease was similar to that reported in other population samples. Regular SPT was important for preventing peri-implantitis. Single implants were found to be less susceptible to peri-implantitis than those supporting FDP

  13. Proxy indicators for identifying iron deficiency among anemic vegetarians in an area prevalent for thalassemia and hemoglobinopathies.

    Science.gov (United States)

    Wongprachum, Kasama; Sanchaisuriya, Kanokwan; Sanchaisuriya, Pattara; Siridamrongvattana, Sirivara; Manpeun, Suwanna; Schlep, Frank P

    2012-01-01

    The study aimed to determine the proportion of iron deficiency (ID) anemia (IDA) among vegans in northeast Thailand and to explore whether mathematical formulas derived from red blood cell (RBC) indices are applicable for IDA screening in the study population. Blood samples from 234 individuals (age 6-45 years) living in a vegan community were taken. Complete blood cell count, serum ferritin, hemoglobin profiles and DNA analysis for α-thalassemia were determined. Anemia was defined using the WHO criteria adjusted for age and sex. Serum ferritin thalassemia and hemoglobinopathies was 56.4% (95% CI = 49.8-62.9%). Of the anemic participants, 45.4% had ID. Based on the receiver-operating characteristic curve analysis, 4 formulas were applicable for predicting ID among anemic individuals (highest sensitivity of 86.4%). The proposed formulas might be used as proxy indicators for the identification of ID among anemic children and adult vegans if more sophisticated laboratory determinations are not available due to limited financial resources. Copyright © 2012 S. Karger AG, Basel.

  14. Carbohydrates and thermal properties indicate a decrease in stable aggregate carbon following forest colonization of mountain grassland

    DEFF Research Database (Denmark)

    Guidi, Claudia; Cannella, David; Leifeld, Jens

    2015-01-01

    In mountainous areas of Europe, the abandonment of grasslands followed by forest expansion is the dominant land-use change. Labile (i.e. easily decomposable) litter represents the major source for soil microbial products, which promote soil aggregation and long-term C stabilization. Our objective......-use gradient in the Southern Alps (Italy) following analysis of carbohydrate monomers and thermal analysis of mineral soil and physical soil fractions. The land-use gradient comprised managed grassland, two transitional phases in which grassland abandonment led to colonization by Picea abies (L.) Karst......., and an old forest dominated by Fagus sylvatica L. and P. abies.Grassland abandoned for 10years tended to have higher levels of carbohydrate and thermally labile soil C than managed grassland and old forest, presumably caused by differences in the quality and amount of litter input. Carbohydrates...

  15. Prevalence of hepatitis A and B markers and vaccine indication in cirrhotic patients evaluated for liver transplantation in Spain.

    Science.gov (United States)

    Aoufi, S; Pascasio, J M; Sousa, J M; Sayago, M; Ferrer, M T; Gómez-Delgado, E; De la Cruz, M D; Alamo, J M; Gómez-Bravo, M A; Bernardos, A; Márquez, J L

    2008-11-01

    Vaccination against hepatitis A virus (HAV) and hepatitis B virus (HBV) is generally recommended for patients with chronic liver disease and those evaluated for liver transplantation in the absence of immunity. HAV and HBV infections after liver transplantation are frequent and associated with a worse prognosis. The data suggest that the number of patients with chronic liver disease without naturally acquired immunity against HAV and HBV is substantial, and that new vaccination strategies are needed. The aim of this study was to determine the level of immunity from hepatitis A and B infections and the need for HBV and HAV vaccination among cirrhotic patients evaluated for liver transplantation. We studied HBV and HAV serological markers (HbsAg, anti-HBc, anti-HBs, IgG anti-HAV) in 451 cirrhotic patients evaluated for liver transplantation to investigate the association with gender, age, and etiology of cirrhosis. Negative HBV markers were observed in 57% of patients with 43% displaying one positive HBV marker: HBsAg (+), 9.5%; anti-HBc (+)/anti-HBs (-), 11.5%; anti-HBc (-)/anti-HBs(+), 4.2%; anti-HBc(+)/anti-HBs(+), 17.7%. HBV vaccine indication established in 68.5% of patients was greater among women and hepatitis C virus-negative patients. No differences were observed in age or cause of cirrhosis. HAV vaccination indicated in 6.7% of patients (IgG anti-HVA-negative) was greater among patients with negative HBV markers (9.3% vs 3.3%, P = .018) and younger patients (25.3% of patients liver transplantation, as is time for HAV vaccine, especially among patients younger than 45 years of age.

  16. Prevalence and risk indicators of peri-implantitis in Korean patients with a history of periodontal disease: a cross-sectional study

    OpenAIRE

    Goh, Mi-Seon; Hong, Eun-Jin; Chang, Moontaek

    2017-01-01

    Purpose The aim of this study was to analyze the prevalence and risk indicators of peri-implantitis in Korean patients with history of periodontal disease. Methods A total of 444 patients with 1,485 implants were selected from patients who had been treated at the Department of Periodontology, Chonbuk National University Dental Hospital between July 2014 and June 2015. A group with a history of peri-implantitis (HP) (370 patients with 1,189 implants) and a group with a current peri-implantitis...

  17. Evidences of +896 A/G TLR4 Polymorphism as an Indicative of Prevalence of Complications in T2DM Patients

    Directory of Open Access Journals (Sweden)

    Carmela Rita Balistreri

    2014-01-01

    Full Text Available T2DM is today considered as world-wide health problem, with complications responsible of an enhanced mortality and morbidity. Thus, new strategies for its prevention and therapy are necessary. For this reason, the research interest has focused its attention on TLR4 and its polymorphisms, particularly the rs4986790. However, no conclusive findings have been reported until now about the role of this polymorphism in development of T2DM and its complications, even if a recent meta-analysis showed its T2DM association in Caucasians. In this study, we sought to evaluate the weight of rs4986790 polymorphism in the risk of the major T2DM complications, including 367 T2DM patients complicated for the 55.6%. Patients with A/A and A/G TLR4 genotypes showed significant differences in complication’s prevalence. In particular, AG carriers had higher risk prevalence for neuropathy (P=0.026, lower limb arteriopathy (P=0.013, and the major cardiovascular pathologies (P=0.017. Their cumulative risk was significant (P=0.01, with a threefold risk to develop neuropathy, lower limb arteriopathy, and major cardiovascular events in AG cases compared to AA cases. The adjusted OR for the confounding variables was 3.788 (95% CI: 1.642–8.741. Thus, the rs4986790 polymorphism may be an indicative of prevalence of complications in T2DM patients.

  18. Prevalence of carcass bruises as an indicator of welfare in beef cattle and the relation to the economic impact.

    Science.gov (United States)

    Huertas, Stella M; van Eerdenburg, Frank; Gil, Andrés; Piaggio, José

    2015-07-01

    The objective of this work was to characterize bruises in bovine carcasses in Uruguay and to evaluate the economic impact. Thirteen abattoirs were visited during 2 years and bruises were identified, classified, and quantified by zone and degree (depth and size). One hundred carcasses were separated and bruises were cut out and weighed separately. From a total of 15 157 carcasses observed, 60.0% had at least one bruise; 42.0% of these had bruises on both sides. The expensive butt zone was the most damaged, followed by rib, shoulder and loin, respectively. The mean weight and standard error of the condemned trimmed meat was 1602 ± 212 g. It suppose a loss of 899 g per animal slaugtered in Uruguay. In a country sending 2.5 million heads of cattle to be slaughter yearly, this indicates an important financial loss. Improving transport conditions and personnel skills will probably result in a better welfare for the animals as well as better financial profit.

  19. Increasing prevalence of macrosomia in Flanders, Belgium: an indicator of population health and a burden for the future

    Science.gov (United States)

    Gyselaers, W.; Martens, G.

    2012-01-01

    Macrosomia, defined as birth weight > 4 kg, increased in Flanders from 7.3% (4899/67143) in 1991 to 8.63% (6034/69924) in 2010 (p  25 kg/m²), and 12% are obese (BMI > 30 kg/m²). From these data, rate and increase of macrosomia can be considered indirect indicators of general public health. Next to the risks for obstetrical complications, neonates > 4 kg are at risk for development of adult obesity and type 2 diabetes with related diseases, such as hypertension and metabolic syndrome. As adults, they also tend to deliver macrosomic baby’s themselves. As such, macrosomia at birth is a burden for a community’s future health status, health care and related costs. Prenatal health care workers should be aware of the relevance to prevent macrosomia in the first generation by implementing guidelines on nutrition, physical activity and appropriate weight gain into routine preconceptional and prenatal care, screening for gestational diabetes with strict monitoring of blood sugar levels in affected individuals, and promotion of breastfeeding. PMID:24753901

  20. Prevalence of Pathogens and Indicator Organisms in Home Kitchens and Correlation with Unsafe Food Handling Practices and Conditions.

    Science.gov (United States)

    Borrusso, Patricia A; Quinlan, Jennifer J

    2017-04-01

    Despite education efforts, consumers often practice unsafe food handling and storage behaviors. Little is known about how these unsafe practices contribute to contamination of the home kitchen with foodborne pathogens. In addition, only a limited number of studies have examined the role of the kitchen as a reservoir for pathogens. The purpose of this study was to characterize microbial contamination and foodborne pathogens found in home kitchens and determine whether contamination was significantly associated with unsafe or unsanitary conditions observed in the kitchen. Swab samples were collected from food contact and preparation surfaces in homes (n = 100) in Philadelphia, PA. The samples were tested for coliforms, fecal coliforms, Escherichia coli , Staphylococcus aureus , Salmonella, Campylobacter, and Listeria. Fecal coliforms were found in 44% of homes (most often in samples from kitchen sinks, sponges, and dishcloths), and E. coli was found in 15% of homes (mostly in samples from kitchen sinks). Nearly half (45%) of the homes tested positive for a foodborne pathogen, and 12% had multiple pathogens present in the kitchen. S. aureus was isolated from 39% of homes, most often from countertops and refrigerator door handles. Listeria spp., including L. monocytogenes and L. innocua , were present in 15% of homes, most often in samples from refrigerator meat drawers. C. jejuni was isolated from 3% of homes. Contamination with Listeria was significantly associated with higher refrigerator temperatures. The contamination of surfaces with fecal coliforms and S. aureus was significantly associated with a lack of cleaning materials: dish soap and paper or cloth towels in the kitchen, and any type of towel in the nearest bathroom. The contamination of a sponge or dishcloth with either fecal coliforms or S. aureus was predictive of other surfaces in the kitchen having the same contamination, indicating that sponges and dishcloths are both reservoirs and vectors for

  1. Prevalence, knowledge, attitudes and practices towards body art in university students: body art as an indicator of risk taking behaviours?

    Directory of Open Access Journals (Sweden)

    Enza Sidoti

    2010-12-01

    having no consequences for infections and/or disease.

    Conclusions: Body art was associated with unhealthy ifestyles and may be considered an indicator of risk taking behaviours. Individuals had no accurate idea of the consequences for their health and body, apart from a generic risk of infections. Education is a necessary tool for the modification of lifestyles and as a form of prevention ensuring the correct understanding and assessment of the health risk involved.

  2. Nutritional mitigation of winter thermal stress in gilthead seabream associated metabolic pathways and potential indicators of nutritional state

    DEFF Research Database (Denmark)

    Richard, Nadege; Silva, Tomé S.; Wulff, Tune

    2016-01-01

    A trial was carried out with gilthead seabream juveniles, aiming to investigate the ability of an enhanced dietary formulation (diet Winter Feed, WF, containing a higher proportion of marine-derived protein sources and supplemented in phospholipids, vitamin C, vitamin E and taurine) to assist fis...... and metabolic profiling purposes. Intragroup variability and co-measured information were also used to pinpoint which proteins displayed a stronger relation with fish nutritional state....... in coping with winter thermal stress, compared to a low-cost commercial diet (diet CTRL). In order to identify the metabolic pathways affected by WF diet, a comparative two dimensional differential in-gel electrophoresis (2D-DIGE) analysis of fish liver proteome (pH 4–7) was undertaken at the end of winter...

  3. Expression times for hsp27 and hsp70 as an indicator of thermal stress during death due to fire.

    Science.gov (United States)

    Doberentz, E; Genneper, L; Wagner, R; Madea, B

    2017-11-01

    The expression of heat shock proteins (hsps) increases in cases of hyperthermal cellular stress in order to protect cellular structures. Hsps can be visualized with immunohistochemical staining. We examined 48 cases of death from fire and excessive heat and a control group of 100 deaths without any perimortem thermal stress, measuring both the hsp27 and hsp70 expressions in myocardial, pulmonary, and renal tissues. The results revealed a correlation between hsp expression and survival time. Hsps are expressed rapidly within seconds or minutes after exposure to heat stress. In particular, hsp27 is expressed fast in high levels, whereas hsp70 expression is higher in the pulmonary and renal tissue of long-term survivors. In the myocardial tissue, hsp27 expression dominated in both short- and long-term survival. The expression pattern is strongly dependent on the organ structure and the survival time, which should be considered in future postmortem studies on hsps.

  4. Prevalence of foot disorders in captive Sardinian partridges (Alectoris barbara barbara Bonnaterre, 1790) as useful indicators of fitness to natural environment.

    Science.gov (United States)

    Cappai, M G; Abd El-Wahab, A; Arru, G; Muzzeddu, M; Pinna, W

    2018-04-01

    Foot health represents an issue in wild avifauna breeding practices. In particular, prevalence of digital ulceration (DU) and foot pad dermatitis (FPD) are valid indicators of welfare in wildlife conservation centres and may be interpreted as to fitness for bird's reintroduction into the wild. This study meant to test the effects of raising practices on foot pad health in captive Sardinian partridges (Alectoris barbara barbara Bonnaterre, 1790) reared for biodiversity conservation, to assess welfare and fitness to reintroduction into nature. A total of 22 couples were allotted into two experimental groups. In one group, 10 couples were housed in 10 cages for breeding partridges, consisting of two animals each, with metal wire flooring system, above trays where droppings were collected. The remaining 12 couples were housed in six aviaries, consisting of four animals each, on natural (earth and stones) ground. In both groups, partridges were fed identical diets. No significant differences of food pad scoring were found between birds housed in cages (2.3 ± 0.4) and those reared in aviaries on natural ground (2.5 ± 0.6). Moreover, scores of male foot pads for both groups (2.4 ± 0.6) had no significant differences in comparison with female foot pads, independently on housing (2.5 ± 0.4). Body mass (BM) was higher (+4.36%) than average BM reported for wild Sardinian partridges. Digital ulceration was found in the 20% of females, exclusively from the cage group. Body mass of females in cages with metal wire flooring appeared to be significantly (p < .001) and negatively correlated (r = -.528) with DU prevalence. These results suggest that housing conditions impacts differently on behaviour of females and males in one same couple, and this relates to foot health, in particular as to DU prevalence. © 2017 Blackwell Verlag GmbH.

  5. The relationships between environmental and physiological heat stress indices in Muslim women under the controlled thermal conditions

    Directory of Open Access Journals (Sweden)

    Peymaneh Habibi

    2015-01-01

    Full Text Available Aims: The aim of this study was to evaluate the relationship between environmental and physiological heat stress indices based on heart rate (HR, oral temperature for the estimation of heat strain, in veiled women in hot-dry condition in the climate chamber. Materials and Methods: The experimental study was carried out on 36 healthy Muslim women in hot-dry climatic conditions (wet bulb globe temperature (WBGT = 22-32°C in low workload for 2 h. The HR, oral temperature and WBGT index were measured. The obtained data were analyzed using descriptive statistics and Pearson correlation tests. Results: The results of the Pearson test indicated that physiological strain index was a high correlation (r = 0.975 with WBGT index (P < 0.05. Also, there was a good correlation among WBGT and HR (r = 0.779 and oral temperature (r = 0.981. Conclusion: The findings of this study illustrated that there is a good correlation between environmental and physiological heat stress indices in veiled women with Islamic clothing at the low workload over the action limit (WBGT = 31°C. So that it can be concluded that the WBGT 22-32°C is a good indicator of the heat strain in veiled women with Islamic clothing.

  6. Short-term effects of air quality and thermal stress on non-accidental morbidity-a multivariate meta-analysis comparing indices to single measures.

    Science.gov (United States)

    Lokys, Hanna Leona; Junk, Jürgen; Krein, Andreas

    2018-01-01

    Air quality and thermal stress lead to increased morbidity and mortality. Studies on morbidity and the combined impact of air pollution and thermal stress are still rare. To analyse the correlations between air quality, thermal stress and morbidity, we used a two-stage meta-analysis approach, consisting of a Poisson regression model combined with distributed lag non-linear models (DLNMs) and a meta-analysis investigating whether latitude or the number of inhabitants significantly influence the correlations. We used air pollution, meteorological and hospital admission data from 28 administrative districts along a north-south gradient in western Germany from 2001 to 2011. We compared the performance of the single measure particulate matter (PM10) and air temperature to air quality indices (MPI and CAQI) and the biometeorological index UTCI. Based on the Akaike information criterion (AIC), it can be shown that using air quality indices instead of single measures increases the model strength. However, using the UTCI in the model does not give additional information compared to mean air temperature. Interaction between the 3-day average of air quality (max PM10, max CAQI and max MPI) and meteorology (mean air temperature and mean UTCI) did not improve the models. Using the mean air temperature, we found immediate effects of heat stress (RR 1.0013, 95% CI: 0.9983-1.0043) and by 3 days delayed effects of cold stress (RR: 1.0184, 95% CI: 1.0117-1.0252). The results for air quality differ between both air quality indices and PM10. CAQI and MPI show a delayed impact on morbidity with a maximum RR after 2 days (MPI 1.0058, 95% CI: 1.0013-1.0102; CAQI 1.0068, 95% CI: 1.0030-1.0107). Latitude was identified as a significant meta-variable, whereas the number of inhabitants was not significant in the model.

  7. Short-term effects of air quality and thermal stress on non-accidental morbidity—a multivariate meta-analysis comparing indices to single measures

    Science.gov (United States)

    Lokys, Hanna Leona; Junk, Jürgen; Krein, Andreas

    2018-01-01

    Air quality and thermal stress lead to increased morbidity and mortality. Studies on morbidity and the combined impact of air pollution and thermal stress are still rare. To analyse the correlations between air quality, thermal stress and morbidity, we used a two-stage meta-analysis approach, consisting of a Poisson regression model combined with distributed lag non-linear models (DLNMs) and a meta-analysis investigating whether latitude or the number of inhabitants significantly influence the correlations. We used air pollution, meteorological and hospital admission data from 28 administrative districts along a north-south gradient in western Germany from 2001 to 2011. We compared the performance of the single measure particulate matter (PM10) and air temperature to air quality indices (MPI and CAQI) and the biometeorological index UTCI. Based on the Akaike information criterion (AIC), it can be shown that using air quality indices instead of single measures increases the model strength. However, using the UTCI in the model does not give additional information compared to mean air temperature. Interaction between the 3-day average of air quality (max PM10, max CAQI and max MPI) and meteorology (mean air temperature and mean UTCI) did not improve the models. Using the mean air temperature, we found immediate effects of heat stress (RR 1.0013, 95% CI: 0.9983-1.0043) and by 3 days delayed effects of cold stress (RR: 1.0184, 95% CI: 1.0117-1.0252). The results for air quality differ between both air quality indices and PM10. CAQI and MPI show a delayed impact on morbidity with a maximum RR after 2 days (MPI 1.0058, 95% CI: 1.0013-1.0102; CAQI 1.0068, 95% CI: 1.0030-1.0107). Latitude was identified as a significant meta-variable, whereas the number of inhabitants was not significant in the model.

  8. Prevalence and Predictive Value of BI-RADS 3, 4, and 5 Lesions Detected on Breast MRI: Correlation with Study Indication.

    Science.gov (United States)

    Chikarmane, Sona A; Tai, Ryan; Meyer, Jack E; Giess, Catherine S

    2017-04-01

    This study aims to determine the prevalence and predictive value of Breast Imaging Reporting and Data System (BI-RADS) 3, 4, and 5 findings on breast magnetic resonance imaging (MRI) and to evaluate the impact of study indication on the predictive value of BI-RADS categories. This institutional review board approved, Health Insurance Portability and Accountability Act (HIPAA) compliant retrospective review of our breast MRI database from 2009 to 2011, of 5778 contrast-enhanced studies in 3360 patients was performed. At our institution, each breast receives an individual BI-RADS assessment. Breast MRI reports and electronic medical records were reviewed to obtain BI-RADS assessment, patient demographics, and outcomes. Univariate analysis was performed with Fisher exact and chi-square tests. A total of 9216 BI-RADS assessments were assigned during the study period: 7879 (85.5%) BI-RADS 1 and 2, 567 (6.2%) BI-RADS 3, 715 (7.8%) BI-RADS 4, and 55 (0.6%) BI-RADS 5 assessments. The frequency of BI-RADS 3, 4, and 5 assessments was higher in studies performed for diagnostic (7.8%, 14.6%, 1.6%, respectively) than screening (5.2%, 4.0%, 0.1%) indications (P BI-RADS 4 and 5 lesions were biopsied with 209 (31.5%) malignant and 454 (68.5%) benign outcomes. The overall cancer rate for BI-RADS 3 findings was 1.9% (11 of 567) with no difference observed by study indication (diagnostic, 1.6%; screening, 2.3%; P = 0.76). The positive predictive value (PPV2) of BI-RADS 4 and 5 was higher for diagnostic (29.1%, 154 of 530) than for screening (22.9%, 55 of 240) indications. Abnormal interpretation rates and PPV2 for MRIs performed for diagnostic indications are higher than for screening indications. Similar to mammography, breast MRI audits should be separated by study indication. Copyright © 2017 The Association of University Radiologists. Published by Elsevier Inc. All rights reserved.

  9. Frontal brain activity and behavioral indicators of affective states are weakly affected by thermal stimuli in sheep living in different housing conditions

    Directory of Open Access Journals (Sweden)

    Sabine eVögeli

    2015-05-01

    Full Text Available Many stimuli evoke short-term emotional reactions. These reactions may play an important role in assessing how a subject perceives a stimulus. Additionally, long-term mood may modulate the emotional reactions but it is still unclear in what way. The question seems to be important in terms of animal welfare, as a negative mood may taint emotional reactions. In the present study with sheep, we investigated the effects of thermal stimuli on emotional reactions and the potential modulating effect of mood induced by manipulations of the housing conditions. We assume that unpredictable, stimulus-poor conditions lead to a negative and predictable, stimulus-rich conditions to a positive mood state. The thermal stimuli were applied to the upper breast during warm ambient temperatures: hot (as presumably negative, intermediate, and cold (as presumably positive. We recorded cortical activity by functional near-infrared spectroscopy, restlessness behavior (e.g. locomotor activity, aversive behaviors and ear postures as indicators of emotional reactions. The strongest hemodynamic reaction was found during a stimulus of intermediate valence independent of the animal’s housing conditions, whereas locomotor activity, ear movements and aversive behaviors were seen most in sheep from the unpredictable, stimulus-poor housing conditions, independent of stimulus valence. We conclude that, sheep perceived the thermal stimuli and differentiated between some of them. An adequate interpretation of the neuronal activity pattern remains difficult, though. The effects of housing conditions were small indicating that the induction of mood was only modestly efficacious. Therefore, a modulating effect of mood on the emotional reaction was not found.

  10. Kinetics study of metaxalone degradation under hydrolytic, oxidative and thermal stress conditions using stability-indicating HPLC method

    Directory of Open Access Journals (Sweden)

    Vamsi Krishna Marothu

    2012-12-01

    Full Text Available An isocratic stability indicating RP-HPLC–UV method is presented for the determination of metaxalone (MET in the presence of its degradation products. The method uses Dr. Maisch C18 column (250 mm×4.6 mm, 5 μm with mobile phase consisting of acetonitrile–potassium dihydrogen orthophosphate buffer with 4 mL of 0.4% triethyl amine (pH 3.0; 10 mM (58:42, v/v at a flow rate of 1.0 mL/min. pH of the buffer was adjusted with o-phosphoric acid. UV detection was performed at 225 nm. The method was validated for specificity, linearity, precision, accuracy, limit of detection, limit of quantification and robustness. The calibration plot was linear over the concentration range of 1–100 μg/mL having a correlation coefficient (r2 of 0.999. Limits of detection and quantification were 0.3 and 1 μg/mL, respectively. Intra-day and inter-day precision (% RSD was 0.65 and 0.79 respectively. The proposed method was used to investigate the degradation kinetics of MET under different stress conditions employed. Degradation of MET followed a pseudo-first-order kinetics, and rate constant (K, time left for 50% potency (t1/2, and time left for 90% potency (t90 were calculated. Keywords: Metaxalone, Degradation kinetics, RP-HPLC–UV

  11. Prevalência de indicadores de risco para surdez em neonatos em uma maternidade paulista Prevalence of deafness risk indicators in newborns in a São Paulo' upcountry materninty hospital

    Directory of Open Access Journals (Sweden)

    Bárbara Carolina Teixeira Amado

    2009-01-01

    Full Text Available OBJETIVO: identificar os indicadores de risco para perda auditiva em recém-nascidos de um hospital da rede pública de Campinas - São Paulo, no período de julho de 2007 a janeiro de 2008. MÉTODOS: a amostra foi composta por 589 protocolos de neonatos avaliados no Programa de Triagem Auditiva Neonatal Universal, no período. RESULTADOS: do total de protocolos estudados, 152 (25,8% evidenciaram presença de indicadores de risco para surdez em neonatos. Dentre eles, os mais prevalentes, em ordem decrescente, foram: antecedentes familiares (26,3%, boletim Apgar de 0 a 4 no primeiro minuto (23,6%, uso de medicamentos ototóxicos (23,6%, permanência em incubadora (22,3%, hiperbilirrubinemia (21,7% e permanência em Unidade de Terapia Intensiva Neonatal (18,4%. CONCLUSÃO: o número de indicadores de risco encontrados por neonato variou de um a seis. Dentre os neonatos com indicadores de risco, apenas um bebê falhou nas três avaliações realizadas na triagem auditiva, sendo que, de acordo com seu protocolo, ele apresentava três indicadores de risco para surdez.PURPOSE: to identify the hearing loss risk indicators in newborns at a public hospital facility in Campinas - São Paulo, in the period from July 2007 to January 2008. METHODS: sample composed of 589 protocols of newborns evaluated in the Program of Universal Hearing Screening during the considered period. RESULTS: 152 protocols (25.8% showed hearing loss risk indicators. Among them, the most prevalent were, in decreasing order: family antecedents (26.3 %; Apgar index from 0 to 4 in the first minute (23.6%; ototoxic drug use (23.6 %, incubator permanence (22.3%, hyperbilirubinemia of the newborn (21.7% and permanence in Neonatal Intensive Care Unit (18.4%. CONCLUSION: the number of risk indicators found per newborn ranged from 1 to 6. Among the newborns with hearing loss risk indicators, just one baby failed in the three evaluations conducted in the hearing screening program. This baby

  12. Prevalence of malnutrition and relationship between dietary intake and sociodemographic characteristics with anthropometric indicators among Malaysian children below five years old

    International Nuclear Information System (INIS)

    Poh, Bee Koon; Nguyen, Thu Ha; Wee, Bee Suan; Wong, Jyh Eiin; Lee, Shoo Thien; Nik Shanita, Safii; Ruzita, Abd Talib; Norimah, A Karim

    2014-01-01

    Full text: Malnutrition, a condition marked by deficiencies of energy, protein, fats, vitamins and minerals, can pose a great risk to the health of a child. This paper aims to determine the nutritional status and the relationship between sociodemographic characteristics, nutrient and energy intake with anthropometric indicators among children below five years old. This study is part of the Nutrition Survey of Malaysian Children, which is part of the four-country South East Asian Nutrition Surveys (SEANUTS). This nationwide cross sectional study recruited a total of 880 (48.2% boys, 51.8% girls) children aged between 0.5 months to 5 years through stratified random sampling. Anthropometric measurements comprised weight and height, and body mass index (BMI) was calculated. Dietary intake was assessed by food frequency questionnaires developed and validated for Malaysian children. WHO Child Growth Standards 2006 was used to determine z-scores for height-for-age (HAZ), weight-for-age (WAZ), weight-for-height (WHZ) and BMI-for-age (BAZ). Overall, 7.5% of the children were underweight, 13.3% stunted, 3.2% wasted and 2.6% thin with the highest prevalence in children aged below one year. The prevalence of underweight (8.6% vs 6.3%), stunted (16.8% vs 9.7%) and wasting (4.0% vs 2.3%) was found to be higher among boys; while thinness was higher among girls (3.5% vs 1.6%). WHZ (R2 = 0.296), HAZ (R2 = 0.291) and BAZ (R2 = 0.265) were found to have positive and significant relationships with intake of energy, calcium and vitamin C. Statistically significant linear dependence of the mean of WAZ on all nutrient variables was found (R2 = 0.448). Other factors influencing anthropometric outcomes were sex, locality of residence, household income and ethnicity. In conclusion, malnutrition is still a health concern among children under five in Malaysia. Stunting and underweight is the predominant nutritional problem among children below one year old. Problems of malnutrition need to be

  13. Analysis of changes in thermal growing season indices (tGSI) and their relations with some selected atmospheric teleconnection patterns (ATPs) over the northwest of Iran.

    Science.gov (United States)

    Sabziparvar, Ali Akbar; Jahromi, Fatemeh Khoshhal

    2018-02-15

    The daily minimum air temperature data from 18 stations located in the northwest of Iran during the period 1986-2015 was used to analyse the inter-annual variations and trends of thermal growing season indices (tGSI) and their relations with different atmospheric teleconnection patterns (ATPs). To analyze the changes in tGSI, tGSS (thermal growing season start), tGSE (thermal growing season end), and tGSL, the time period between tGSS and tGSE were considered. Using non-parametric Mann-Kendall and Spearman tests, the existence of a significant trend for time series of the tGSI and the correlation between ATPs and tGSI was evaluated. For eliminating the effect of serial correlation on test results, the trend-free pre-whitening approach was applied. Furthermore, residual bootstrap method was used to estimate the standard deviation of the Spearman correlation coefficient between tGSI and ATPs. The climate-based results showed the maximum tGSL increase (13.3 days per decade) for SA-C-M climate. For SH-K-W climate, the maximum significant trends for tGSS and tGSE were 9.6 (earlier start) and 10.8 (delay) days per decade, respectively. In general, in all statistically significant cases, the main cause of the extended tGSL was both earlier tGSS and delayed tGSE. In regional scale, it was found that the most effective teleconnection pattern on tGSS and tGSE are MEI (positive correlation), occurring during late winter and spring, and PDO index (negative correlation) in the summer, respectively. Moreover, the tGSL demonstrated the highest correlation (negative) with PDO with 1-month delay. The findings highlight that the inter-annual variations of tGSI in northwest of Iran can be attributed to the influence of certain atmospheric teleconnection patterns such as MEI, PDO, NAO, AO, EA, and AMO.

  14. Dental health awareness, attitude, and dental health-care seeking practices as risk indicators for the prevalence of periodontal disease among 15–17-year-old school children in Kozhikode district, Kerala, India

    Directory of Open Access Journals (Sweden)

    Uma Mohan Das

    2017-01-01

    Full Text Available Background: Periodontal disease prevalence in children is an indicator of future disease burden in the adult population. Knowledge about the prevalence and risk status of periodontal disease in children can prove instrumental in the initiation of appropriate preventive and therapeutic measures. Aim: This school-based cross-sectional survey estimated the prevalence and severity of periodontal disease among 15–17-year-old children in Kozhikode district and assessed the risk factors. Materials and Methods: Multistage stratified random sampling and randomized cluster sampling were used in the selection of schools and study participants, respectively, in three educational districts of Kozhikode. Periodontal disease was assessed among 2000 school children aged 15–17 years, by community periodontal index. A content validated questionnaire was used to evaluate the sociodemographic characteristics and other risk factors. Results: The prevalence of periodontal disease was estimated as 75% (72% gingivitis and 3% mild periodontitis. The prevalence was higher in urban population (P = 0.049 and males had significantly (P = 0.001 higher prevalence. Lower socioeconomic strata experienced slightly more periodontal disease burden. Satisfactory oral hygiene practices (material and frequency were observed, but oral hygiene techniques were erroneous. Unhealthy dental treatment-seeking practices and unfavorable attitude toward dental treatment (ATDT significantly influenced periodontal health status. Overall awareness about dental treatment was poor in this study population. Conclusion: The prevalence of periodontal disease among 15–17-year-old school children in Kozhikode district is 75% and is influenced by sociodemographic characteristics. Other risk factors identified were unhealthy dental treatment-seeking practices and unfavorable ATDT. Implementation of well-formulated oral health education programs is thus mandatory.

  15. Dental health awareness, attitude, and dental health-care seeking practices as risk indicators for the prevalence of periodontal disease among 15–17-year-old school children in Kozhikode district, Kerala, India

    Science.gov (United States)

    Das, Uma Mohan; Vadakkekuttical, Rosamma Joseph; Kanakkath, Harikumar; Shankunni, Smitha Pathiyari

    2017-01-01

    Background: Periodontal disease prevalence in children is an indicator of future disease burden in the adult population. Knowledge about the prevalence and risk status of periodontal disease in children can prove instrumental in the initiation of appropriate preventive and therapeutic measures. Aim: This school-based cross-sectional survey estimated the prevalence and severity of periodontal disease among 15–17-year-old children in Kozhikode district and assessed the risk factors. Materials and Methods: Multistage stratified random sampling and randomized cluster sampling were used in the selection of schools and study participants, respectively, in three educational districts of Kozhikode. Periodontal disease was assessed among 2000 school children aged 15–17 years, by community periodontal index. A content validated questionnaire was used to evaluate the sociodemographic characteristics and other risk factors. Results: The prevalence of periodontal disease was estimated as 75% (72% gingivitis and 3% mild periodontitis). The prevalence was higher in urban population (P = 0.049) and males had significantly (P = 0.001) higher prevalence. Lower socioeconomic strata experienced slightly more periodontal disease burden. Satisfactory oral hygiene practices (material and frequency) were observed, but oral hygiene techniques were erroneous. Unhealthy dental treatment-seeking practices and unfavorable attitude toward dental treatment (ATDT) significantly influenced periodontal health status. Overall awareness about dental treatment was poor in this study population. Conclusion: The prevalence of periodontal disease among 15–17-year-old school children in Kozhikode district is 75% and is influenced by sociodemographic characteristics. Other risk factors identified were unhealthy dental treatment-seeking practices and unfavorable ATDT. Implementation of well-formulated oral health education programs is thus mandatory. PMID:29398860

  16. The prevalence of musculoskeletal disorders and occupational risk factors in Kashan SAIPA automobile industry workers by key indicator method (KIM, 1390

    Directory of Open Access Journals (Sweden)

    2012-05-01

    Full Text Available Introduction: work related musculoskeletal disorders are the most wide spread type of occupational diseases among workers. Awkward body postures during work and manual material handling are among the most important risk factors of musculoskeletal disorders in different jobs. Due to importance of recognizing these factors prevalence and risk factor of work related musculoskeletal disorders, this research was aimed to study the among employees of Kashan City’s Saipa automobile industry in 2011. .Material and Method: This study is a descriptive-cross sectional study conducted among workers with manual material handling 37 activities and 84 work duties. To recognize musculoskeletal disorders, body map questionnaire was applied and occupational risk factors were evaluated using Key Index Method (KIM. Data was analyzed using SPSS and Excel software. .Result: Highest prevalence of musculoskeletal disorders was in low and upper back region (%92. Based on the results from KIM, workers in the installing the tire, shuttle-aided fitting of seat, and engine work station had higher risk level with the scores of 66, 52 and 52, respectively. Risk level among three individuals (%3.6 was at 1, 40 (%47.6 at 2, 38 (%45.2 risk level 3, and 3 (%3.6 at 4. .Conclusion: Awkward body posture, improper twisting and flexion of low back were major risk factor among worker doing manual material handling tasks. Regarding the high prevalence of musculoskeletal disorders, appropriate ergonomic interventions such as engineering and organization interactions can reduce this risk factors (posture, heavy load, duration, workplace conditions as much as the risk level reach to an acceptable level.

  17. Prevalência e fatores associados a indicadores negativos de saúde mental em adolescentes estudantes do ensino médio em Pernambuco, Brasil The prevalence of and factors associated with negative mental health indicators in adolescents attending high school in the Brazilian State of Pernambuco

    Directory of Open Access Journals (Sweden)

    Priscila Diniz de Carvalho

    2011-09-01

    Full Text Available OBJETIVOS: identificar a prevalência e fatores associados a indicadores negativos de saúde mental em adolescentes. MÉTODOS: utilizou-se um questionário previamente validado para coletar dados de 4.207 adolescentes (14-19 anos estudantes do ensino médio, selecionados através de amostragem por conglomerados em dois estágios. RESULTADOS: as prevalências de tristeza, sentimento de solidão, pensamento de suicídio, dificuldade para dormir devido à preocupação e planos de suicídio foram, respectivamente, 29,7%, 15,8%, 11,2%, 10,0% e 7,8%. A prevalência de todos os indicadores foi superior entre as moças, sendo a tristeza o indicador mais prevalente. Identificou-se que a cor da pele não foi um fator associado à ocorrência dos indicadores negativos de saúde mental, enquanto não morar com os pais apresentou associação significativa com sentimento de solidão e pensamento em suicídio. CONCLUSÕES: a prevalência de sentimento de solidão e de tristeza é alta e as moças representam um subgrupo de maior risco em relação a todos os indicadores negativos de saúde mental.OBJECTIVES: to identify the prevalence of and factors associated with negative mental health indicators among adolescents. METHODS: a previously validated questionnaire was used to gather data on 4,207 adolescents (aged between 14 and 19 years attending high school, selected by way of conglomerate sampling in two stages. RESULTS: the prevalence of sadness, feelings of loneliness, thoughts of suicide, difficulty sleeping because of anxiety, and plans to commit suicide was 29.7%, 15.8%, 11.2%, 10.0% and 7.8% respectively. The prevalence for all indicators was higher among girls, with sadness being the most prevalent indicator. It was identified that skin-color was not a factor associated with the occurrence of negative mental health indicators, while not living with parents showed a significant degree of association with feeling of loneliness and thoughts of suicide

  18. Is deciduousness a key to climate resilience among iconic California savanna oak species? Relating phenological habits to seasonal indicators of tree physiological and water stress across field, hyperspectral, drone (UAS)-based multispectral and thermal image data

    Science.gov (United States)

    Mayes, M. T.; Caylor, K. K.; Ehlmann, B. L.; Greenberger, R. N.; Estes, L. D.

    2017-12-01

    In California (CA) savannas, oak trees (genus Quercus) play keystone roles in water and nutrient cycling, support biodiversity and many land-use activities. Declines in oak basal area of up to 25% from the 1930s-2000s, which have occurred alongside climate trends such as increasing variability of rainfall and prevalence of hotter droughts, threaten the services and ecological functions these trees provide. It is particularly unclear how climate relates to productivity and stress across oak species. Past work has found that seedling recruitment has varied inversely with "deciduousness." That is, evergreen oaks (e.g. Quercus agrifola. Coast Live Oak) are reproducing more successfully than drought-deciduous (e.g. Quercus douglassi, Blue Oak), which in turn are more successful than fully deciduous species (e.g. Quercus lobata, Valley Oak). However, there is poor understanding of how these ecological trends by species, corresponding with phenological habit, relate to physiological and ecohydrological processes such as carbon assimilation, water or nutrient use efficiency in mature tree stands. This limits predictive capability for which species will be most resilient to harsher future growing conditions, and, how to monitor stress and productivity in long-lived mature oak communities across landscapes via tools including remotely sensed data. This project explores how ecophysiological variables (e.g. stomatal conductance) relate to phenological habits across three oak species (Coast Live, Blue and Valley) over a seasonal dry-down period in Santa Barbara County, CA. Our goal is to probe if deciduousness is a key to resilience in productivity and water stress across iconic oak species. We test relationships between leaf and canopy-level field data, and indicators from multiple new sources of remotely sensed data, including ground hyperspectral, drone (UAS)-based multi-spectral and thermal image data, as means of monitoring tree physiological and water stress from scales

  19. Disparities in prevalence and risk indicators of loneliness between rural empty nest and non-empty nest older adults in Chizhou, China.

    Science.gov (United States)

    Cheng, Pan; Jin, Yu; Sun, Hongmin; Tang, Zhenhai; Zhang, Chi; Chen, Yuanjing; Zhang, Qian; Zhang, Qinghe; Huang, Fen

    2015-03-01

    The goal of the present study was to determine the disparities in prevalence and risk factors of loneliness between rural empty nest and non-empty nest older adults in Chizhou, China. A sample of 730 participants (381 empty nest older adults and 349 non-empty nest older adults) were surveyed using the University of California at Los Angeles-Loneliness Scale, the 30-item Geriatric Depression Scale (GDS-30), the Pittsburgh Sleep Quality Index, the Social Support Rate Scale, the Perceived Social Support from Family Scale and the World Health Organization Quality of Life questionnaire abbreviated version. The present study showed that the mean level of loneliness did significantly differ between empty nest older adults and non-empty nest older adults (41.52 ± 6.98 vs 39.46 ± 7.38). Empty nesters had significantly higher GDS scores; by contrast, they received lower objective, subjective and family support. Family support, objective support and social interaction were associated significantly with loneliness, which was more pronounced in empty nest older adults, excluding subjective support and psychological domain. The GDS scores (β = 0.237, P loneliness in empty nest older adults. Loneliness obviously prevails among empty nest older adults than non-empty nest older adults. Depressive symptoms showed a stronger risk of empty nest older adults being lonely. Family support was suggested as a protective factor for loneliness in both groups. These findings should be considered when developing intervention strategies to reduce loneliness. © 2014 Japan Geriatrics Society.

  20. Comparison of UTCI with other thermal indices in the assessment of heat and cold effects on cardiovascular mortality in the Czech Republic

    Czech Academy of Sciences Publication Activity Database

    Urban, Aleš; Kyselý, Jan

    2014-01-01

    Roč. 11, č. 1 (2014), s. 952-967 ISSN 1660-4601 R&D Projects: GA ČR(CZ) GAP209/11/1985 Institutional support: RVO:68378289 Keywords : UTCI * human thermal comfort * mortality * cardiovascular diseases * heat stress * cold stress Subject RIV: DG - Athmosphere Sciences, Meteorology Impact factor: 2.063, year: 2014 http://www.mdpi.com/1660-4601/11/1/952

  1. Adaptive capability as indicated by endocrine and biochemical responses of Malpura ewes subjected to combined stresses (thermal and nutritional) in a semi-arid tropical environment

    Science.gov (United States)

    Sejian, Veerasamy; Maurya, Vijai P.; Naqvi, Sayeed M. K.

    2010-11-01

    A study was conducted to assess the effect of combined stresses (thermal and nutritional) on endocrine and biochemical responses in Malpura ewes. Twenty eight adult Malpura ewes (average body weight 33.56 kg) were used in the present study. The ewes were divided into four groups viz., GI ( n = 7; control), GII ( n = 7; thermal stress), GIII ( n = 7; nutritional stress) and GIV ( n = 7; combined stress). The animals were stall fed with a diet consisting of 60% roughage and 40% concentrate. GI and GII ewes were provided with ad libitum feeding while GIII and GIV ewes were provided with restricted feed (30% intake of GI ewes) to induce nutritional stress. GII and GIV ewes were kept in climatic chamber at 40°C and 55% RH for 6 h a day between 1000 hours and 1600 hours to induce thermal stress. The study was conducted for a period of two estrus cycles. The parameters studied were Hb, PCV, glucose, total protein, total cholesterol, ACP, ALP, cortisol, T4, T3, and insulin. Combined stress significantly ( P ewes. It can be concluded from this study that two stressors occurring simultaneously may impact severely on the biological functions necessary to maintain homeostasis in sheep.

  2. Red cell indices and discriminant functions in the detection of beta-thalassaemia trait in a population with high prevalence of iron deficiency anaemia.

    Science.gov (United States)

    Madan, N; Sikka, M; Sharma, S; Rusia, U; Kela, K

    1999-01-01

    Red cell indices and discriminant functions were studied in 463 heterozygous beta-thalassaemics (337 without iron deficiency, 126 with iron deficiency) and 195 patients of iron deficiency anaemia (IDA) to ascertain their utility in the detection of betathalassaemia trait (BTT). Majority of traits in both groups had an elevated RBC count (> or = 5.0 x 10(12)/L). The counts were significantly higher than of patients with IDA, only 4.6% of whom had this degree of erythrocytosis. Mean Hb concentration was significantly higher in traits as compared to iron deficient subjects (p < 0.0001). Mean MCV and MCH were significantly (p < 0.0001) lower in traits more so in those with ID as compared to patients of IDA. MCV < 80 fl and MCH < 27 pg were found to be sensitive markers in the detection of traits even in the presence of ID. Of the four discriminant functions studied MCSQ was found to be most sensitive in detection of BTT and it identified 97.9% traits. DF of England and Fraser was most specific for BTT being < 8.4 in only 6.2% patients with IDA. Detection of erythrocytosis especially in the presence of mild anaemia and calculation of discriminant functions derived from red cell indices were found to play an important role in screening for BTT even in the presence of ID and helped identify those patients who required further laboratory evaluation.

  3. [Prevalence of iron deficiency anemia and risk indicators in children from 12 to 18 months attended at the outpatient clinic of Instituto de Puericultura e Pediatria Martagão Gesteira].

    Science.gov (United States)

    Rodrigues, C R; Motta, S S; Cordeiro, A A; Lacerda, E M; Reichenheim, M E

    1997-01-01

    The prevalence of iron deficiency anemia and the associated risk indicators were studied in children from 12 to 18 months at the outpatient unit of IPPMG, in order to evaluate and monitor the service. This is a cross-sectional descriptive study of 288 children seen at the outpatient unit of IPPMG, from January to December 1993. Anemia was diagnosed by dosage of seric hemoglobin. The studied risk indicators were: prenatal care, birth weight, pediatric follow-up, socio-economic aspects, breast-feeding pattern, nutritional status, and iron prescription. Data were computerized and analyzed by EPIINFO and EGRET softwares. Statistical analysis was performed by Pearson chi(2), and breast-feeding pattern was analyzed by the Kaplan-Meier survival curves. Fifty percent of all children had anemia and 13.2% had severe anemia. Children had an early entry to follow-up at the clinic, and the number of consultations was adequate, according to the recommendations of the Ministry of Health. Only 27% of families had a "per capita" income above one minimum salary, although most had adequate housing and environmental conditions. The median duration of breast-feeding was 7.8 and of exclusive breast-feeding was 3.2 months. No association between anemia and income, early weaning, low-birth weight or undernutrition was found. The prevalence of anemia was extremely high, indicating the need for a specific monitoring system for the occurrence of iron deficiency anemia in this service.

  4. Development of laser Raman and x-ray photoelectron spectroscopic parameters as an additional thermal maturity indicator to the conodont alteration index

    International Nuclear Information System (INIS)

    Marshall, C.P.; Wilson, M.A.

    1999-01-01

    Full text: Laser Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) was applied in an attempt to quantify and elucidate the chemical transformations of the conodont alteration index (CAI) in artificially matured conodonts. Coniform elements of the genus Drepanodus from the Ordovician Emanuel Formation and pectiniform elements of the genus Polygnathus from the Devonian Napier Formation, both from the Canning Basin were used in this investigation. Samples where specifically chosen to study the effects of genus, element morphology, geological age, lithology and depositional environment upon the CAI. The first order Raman spectra (900-1800 cm-1) of both sets of conodonts show three bands. These are assigned to apatite at 965 cm-1, D band (defects present in the structural units and disorder) at 1345 cm-1 and the G band (carbon-carbon in plane stretching vibration or structural ordered carbon) at 1600 cm-1. The Raman spectra recorded for both sample sets, CAI range of 1-7 are characteristic of poorly/ highly disordered carbon within the conodont organic matter. Further more, the D band becomes progressively narrower and more intense the higher the thermal treatment. The G band becomes narrower until CAI 4 and after that has no systematic change apart from the intensity decreasing with temperature. The most noteworthy spectral characteristic in relation to thermal maturity is the clearly defined linear trend of decreasing D band line-width with increasing rank. The carbon 1s photoelectron regions acquired from both sample sets contain three peaks. These peaks are assigned to carbon bonded to sp3 and sp2 hybridized carbon (284.7 eV), alcohol (287.2 eV) and carboxyl (288.3 eV) functional groups. With increasing thermal treatment all the carbon constituents show a linear decrease in abundance. The poorly/ highly disordered carbon shows no progressive ordering with increasing thermal treatment. This is also in agreement with the XPS results, in which the aliphatic

  5. Algorithms for striking material and energy balances in calculating the technical-and-economic indicators of thermal power plant equipment based on the ill-posed problem regularization method

    Science.gov (United States)

    Leduhovsky, G. V.; Zhukov, V. P.; Barochkin, E. V.; Zimin, A. P.; Razinkov, A. A.

    2015-08-01

    The problem of striking material and energy balances from the data received by thermal power plant computerized automation systems from the technical accounting systems with the accuracy determined by the metrological characteristics of serviceable calibrated instruments is formulated using the mathematical apparatus of ridge regression method. A graph theory based matrix model of material and energy flows in systems having an intricate structure is proposed, using which it is possible to formalize the solution of a particular practical problem at the stage of constructing the system model. The problem of striking material and energy balances is formulated taking into account different degrees of trustworthiness with which the initial flow rates of coolants and their thermophysical parameters were determined, as well as process constraints expressed in terms of balance correlations on mass and energy for individual system nodes or for any combination thereof. Analytic and numerical solutions of the problem are proposed in different versions of its statement differing from each other in the adopted assumptions and considered constraints. It is shown how the procedure for striking material and energy balances from the results of measuring the flows of feed water and steam in the thermal process circuit of a combined heat and power plant affects the calculation accuracy of specific fuel rates for supplying heat and electricity. It has been revealed that the nominal values of indicators and the fuel saving or overexpenditure values associated with these indicators are the most dependent parameters. In calculating these quantities using different balance striking procedures, an error may arise the value of which is commensurable with the power plant thermal efficiency margin stipulated by the regulatory-technical documents on using fuel. The study results were used for substantiating the choice of stating the problem of striking material and fuel balances, as well as

  6. Abrupt hydrographic changes in the equatorial Pacific and subtropical Atlantic from foraminiferal Mg/Ca indicate greenhouse origin for the thermal maximum at the Paleocene-Eocene Boundary

    Science.gov (United States)

    Tripati, Aradhna K.; Elderfield, Henry

    2004-02-01

    The Paleocene-Eocene Boundary (PEB) was marked by an extraordinary climatic event, hypothesized to originate from a large perturbation to the carbon cycle which fueled global warming, the rapid dissociation of oceanic methane hydrates. The pattern of surface warming interpreted from existing sea surface temperature records is not consistent with a greenhouse origin for this event, which would have fueled sea surface warming globally. Although oxygen isotope (δ18O)-based reconstructions indicate polar warming, results for the tropics and subtropics are ambiguous because of uncertainties associated with interpreting planktonic foraminiferal δ18O. To remedy this, we have constructed high-resolution temperature records based on Mg/Ca of multiple species of both surface and thermocline-dwelling planktonic foraminifera across the PEB in the equatorial Pacific and subtropical Atlantic. During the carbon isotope excursion (CIE), surface temperatures increased by 3.5°-4°C and thermocline temperatures warmed by 3°C. Estimates of surface water and thermocline salinity based on paired Mg/Ca and δ18O data indicate a pattern of hydrographic changes in the equatorial and subtropical oceans that is different from previously proposed, with a more vigorous hydrologic cycle during warming. The pattern of warming and salinity changes are consistent with this being a greenhouse-induced global warming event, and the timing of hydrographic changes relative to the CIE supports the hypothesis that gradual warming of intermediate/deep waters triggered methane hydrate dissociation.

  7. Absolute refractive indices and thermal coefficients of CaF2, SrF2, BaF2, and LiF near 157 nm.

    Science.gov (United States)

    Burnett, John H; Gupta, Rajeev; Griesmann, Ulf

    2002-05-01

    We present high-accuracy measurements for wavelengths near 157 nm of the absolute index of refraction, the index dispersion, and the temperature dependence of the index for the ultraviolet optical materials with cubic symmetry: CaF2, SrF2, BaF2, and LiF. Accurate values of these quantities for these materials are needed for designs of the lens systems for F2 excimer-laser-based exposure tools for 157-nm photolithography. These tools are expected to use CaF2 as the primary optical material and possibly one of the others to correct for chromatic aberrations. These optical properties were measured by the minimum deviation method. Absolute refractive indices were obtained with an absolute accuracy of 5 x 10(-6) to 6 x 10(-6).

  8. Matching indices taking the dynamic hybrid electrical and thermal grids information into account for the decision-making of nZEB on-site renewable energy systems

    International Nuclear Information System (INIS)

    Cao, Sunliang; Sirén, Kai

    2015-01-01

    Highlights: • Use dynamic hourly-based grid information (PEF/CEF/tariffs) in nZEB control. • Hourly dynamic primary energy factor, CO 2 factor and tariffs for hybrid grids. • Methodology which links the on-site matching with dynamic grid information. • Multi-objective control indicators reflects both matching and grid information. • The influence of the dynamic grid information on the energy/environment/cost. - Abstract: Future nearly-zero energy buildings (nZEBs) will be involved with the twofold problem of on-site matching and hybrid–grid interactions. Theoretically, the hybrid grids’ information is dynamic, such as primary energy factors, equivalent CO 2 emission factors, and grid tariffs. Regarding primary energy consumption, equivalent CO 2 emissions or the grid cost of the nZEB, the significance of specific aspects of the matching capability, such as on-site energy faction (OEF) and on-site energy matching (OEM), will also become dynamic and variable with respect to the evolution of the grid information. Therefore, the primary goal is to develop a methodology as a multi-objective control criterion for the nZEB energy system, which can reflect both the on-site matching capability and dynamic grid information of environmental or economic impacts. The developed methodology is to quantitatively link the dynamic grid information with the weighting factors of the weighted matching index (WMI), following the monotone relationships between the extended matching indices and grid information. The methodology is implemented in this study to control an nZEB energy system with hybrid grid connections. The results show that the developed methodology can seek an optimised balance between the objectives of maximising the matching capability and minimising the environmental/economic load

  9. A Deviation-Time-Space-Thermal (DTS-T Method for Global Earth Observation System of Systems (GEOSS-Based Earthquake Anomaly Recognition: Criterions and Quantify Indices

    Directory of Open Access Journals (Sweden)

    Shanjun Liu

    2013-10-01

    Full Text Available The particular process of LCA (Lithosphere-Coversphere-Atmosphere coupling referring to local tectonic structures and coversphere conditions is very important for understanding seismic anomaly from GEOSS (Global Earth Observation System of Systems. The LCA coupling based multiple-parameters analysis should be the foundation for earthquake prewarning. Three improved criterions: deviation notable enough, time quasi-synchronism, and space geo-adjacency, plus their quantify indices are defined for earthquake anomaly recognition, and applied to thermal parameters as a DTS-T (Deviation-Time-Space-Thermal method. A normalized reliability index is preliminarily defined considering three quantify indices for deviation-time-space criterions. As an example, the DTS-T method is applied to the Ms 7.1 Yushu earthquake of 14 April 2010 in China. Furthermore, combining with the previous analysis of six recent significant earthquakes in the world, the statistical results regarding effective parameters, the occurrence of anomaly before the main shocks and a reliability index for each earthquake are introduced. It shows that the DTS-T method is reasonable and can be applied for routine monitoring and prewarning in the tectonic seismicity region.

  10. Thermal conductivity of zirconia thermal barrier coatings

    Science.gov (United States)

    Dinwiddie, R. B.; Beecher, S. C.; Nagaraj, B. A.; Moore, C. S.

    1995-01-01

    Thermal barrier coatings (TBC's) applied to the hot gas components of turbine engines lead to enhanced fuel efficiency and component reliability. Understanding the mechanisms which control the thermal transport behavior of the TBC's is of primary importance. Physical vapor deposition (PVD) and plasma spraying (PS) are the two most commonly used coating techniques. These techniques produce coatings with unique microstructures which control their performance and stability. The PS coatings were applied with either standard powder or hollow sphere particles. The hollow sphere particles yielded a lower density and lower thermal conductivity coating. The thermal conductivity of both fully and partially stabilized zirconia, before and after thermal aging, will be compared. The thermal conductivity of the coatings permanently increases upon exposed to high temperatures. These increases are attributed to microstructural changes within the coatings. Sintering of the as-fabricated plasma sprayed lamellar structure is observed by scanning electron microscopy of coatings isothermally heat treated at temperatures greater than 1100 C. During this sintering process the planar porosity between lamella is converted to a series of small spherical pores. The change in pore morphology is the primary reason for the observed increase in thermal conductivity. This increase in thermal conductivity can be modeled using a relationship which depends on both the temperature and time of exposure. Although the PVD coatings are less susceptible to thermal aging effects, preliminary results suggest that they have a higher thermal conductivity than PS coatings, both before and after thermal aging. The increases in thermal conductivity due to thermal aging for partially stabilized plasma sprayed zirconia have been found to be less than for fully stabilized plasma sprayed zirconia coatings. The high temperature thermal diffusivity data indicate that if these coatings reach a temperature above 1100 C

  11. The reciprocal links between synaptophysin serum levels and the prevalence of metabolic syndrome according to selected low-grade inflammation indices and age-related androgen serum level changes in men.

    Science.gov (United States)

    Herman, Waldemar Adam; Wójcicka, Marlena; Kołodziejczak, Barbara; Losy, Jacek; Łącka, Katarzyna

    2016-01-01

    The correlations between synaptophysin (SYP) plasma levels and the brain neurotransmission activity are still not strictly identified. However, the efficiency of neurotransmission depends, inter alia, on the age, hormonal status, and coexistence of a low-grade systemic inflammation (LGSI) which is regarded as a pathogenic link with obesity and insulin resistance, atherogenesis and aging per se. The aim of this study was to investigate the associations between synaptophysin serum levels and age, LGSI indices, homocysteine and selected hormonal parameters (dehydroepiandrosterone and its sulfate, free-testosterone, SHBG) and the prevalence of metabolic syndrome (MS) in men over the age of 40. After randomization, 157 male volunteers aged 40-80 years were included in a retrospective study. MS was diagnosed according to the International Diabetes Federation criteria. For the diagnosis of late-onset hypogonadism (LOH) we adopted the criteria proposed by the European Male Aging Study (EMAS). Synaptophysin plasma concentrations in respondents decreased with age, but only between the ages of 40 to 70 years. There were no differences in SYP plasma concentrations in men suffering from MS compared to healthy subjects (p=0.845). Men suffering from MS demonstrated while higher hs-CRP (high sensitive C - reactive protein) levels than healthy (p=0.019), contrary to the α1-antichymotrypsin and transferrin. A positive monotonic correlation between synaptophysin and hs-CRP was demonstrated (r=0.235; p=0.003). No statistically significant relationships between SYP and homocysteine plasma levels were presented (r=0.047; p=0.562), although in men diagnosed with MS higher homocysteine levels compared to healthy subjects were demonstrated. No correlations between synaptophysin and free testosterone (r=-0.036; p=0.651), DHEA (r=-0.122; p=0.128) and its sulphate (r=-0.024; p=0.764) as well as SHBG (r=-0.088; p=0.288) were demonstrated. Although the correlations between synaptophysin plasma

  12. Empirical Productivity Indices and Indicators

    NARCIS (Netherlands)

    B.M. Balk (Bert)

    2016-01-01

    textabstractThe empirical measurement of productivity change (or difference) by means of indices and indicators starts with the ex post profit/loss accounts of a production unit. Key concepts are profit, leading to indicators, and profitability, leading to indices. The main task for the productivity

  13. Waste indicators

    International Nuclear Information System (INIS)

    Dall, O.; Lassen, C.; Hansen, E.

    2003-01-01

    The Waste Indicator Project focuses on methods to evaluate the efficiency of waste management. The project proposes the use of three indicators for resource consumption, primary energy and landfill requirements, based on the life-cycle principles applied in the EDIP Project. Trial runs are made With the indicators on paper, glass packaging and aluminium, and two models are identified for mapping the Danish waste management, of which the least extensive focuses on real and potential savings. (au)

  14. Waste indicators

    Energy Technology Data Exchange (ETDEWEB)

    Dall, O.; Lassen, C.; Hansen, E. [Cowi A/S, Lyngby (Denmark)

    2003-07-01

    The Waste Indicator Project focuses on methods to evaluate the efficiency of waste management. The project proposes the use of three indicators for resource consumption, primary energy and landfill requirements, based on the life-cycle principles applied in the EDIP Project. Trial runs are made With the indicators on paper, glass packaging and aluminium, and two models are identified for mapping the Danish waste management, of which the least extensive focuses on real and potential savings. (au)

  15. Quality indicators

    DEFF Research Database (Denmark)

    Hjorth-Andersen, Christian

    1991-01-01

    In recent literature it has been suggested that consumers need have no knowledge of product quality as a number of quality indicators (or signals) may be used as substitutes. Very little attention has been paid to the empirical verification of these studies. The present paper is devoted...... to the issue of how well these indicators perform, using market data provided by consumer magazines from 3 countries. The results strongly indicate that price is a poor quality indicator. The paper also presents some evidence which suggests that seller reputation and easily observable characteristics are also...

  16. Indicadores básicos de saúde infantil em área urbana no extremo sul do Brasil: estimando prevalências e avaliando diferenciais Basic indicators of child health in an urban area in southern Brazil: estimating prevalence rates and evaluating differentials

    Directory of Open Access Journals (Sweden)

    Juraci A. Cesar

    2006-12-01

    Full Text Available OBJETIVO: Avaliar e comparar indicadores básicos de saúde infantil entre menores de 5 anos residentes na área urbana do município de Rio Grande (RS em 1995 e 2004. MÉTODOS: Foram realizados dois estudos transversais de base populacional nessa cidade. Entrevistadores previamente treinados aplicaram questionários padronizados em domicílios com crianças menores de 5 anos. Foram investigados: renda familiar, escolaridade materna, tipo de construção da moradia, disponibilidade de sanitário, água encanada, rede de esgotos e eletrodomésticos. Sobre as crianças, investigou-se número de consultas e idade de início do pré-natal, tipo e atendimento ao parto, padrão de amamentação e dieta, morbidade e utilização de serviços de saúde. As crianças foram pesadas e medidas para altura/comprimento. A comparação de freqüências nos dois estudos foi feita através do teste do qui-quadrado. RESULTADOS: Foram estudadas 395 crianças em 1995 e 384 em 2004. Nesse período, houve melhorias no tipo de construção de moradia, na presença de sanitário com descarga, na disponibilidade de água encanada e no padrão e duração da amamentação. A ocorrência de diarréia diminuiu, enquanto as taxas de cobertura vacinal básica, monitoração do crescimento, posse do cartão de saúde e de notificação do peso ao nascer aumentaram. Houve piora no poder aquisitivo das famílias e no número médio de consultas pré-natais realizadas. A prevalência de obesidade infantil aumentou em 92%, enquanto a ocorrência de desnutrição praticamente não se modificou. CONCLUSÕES: A comparação dos indicadores de saúde no período entre os dois estudos mostrou, além de melhorias na maioria dos indicadores avaliados, substancial aumento na prevalência de obesidade infantil.OBJECTIVE: To evaluate and compare basic indicators of the health of children under 5 years old in the urban area of Rio Grande, RS, Brazil, for 1995 and 2004. METHODS: Two cross

  17. Solar Indices

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  18. Geographical Indications

    OpenAIRE

    Anechitoae Constantin; Grigoru? Lavinia-Maria

    2011-01-01

    “The denomination of origin” may be the name of a region, a specific place or country used to describe an agricultural or food product. "The geographical indication" may be the name of a region, a specific place or a country, used to describe an agricultural or food product. The indication of provenance and the denomination of origin serve to identify the source and origin of goods or services.

  19. Operational indicators

    International Nuclear Information System (INIS)

    2010-01-01

    The chapter presents the operational indicators related to budget, travel costs and tickets, the evolution of the annual program for regulatory inspection, the scientific production, requested patents and the numbers related to the production of the services offered by the Institution

  20. Anthropometric indices

    DEFF Research Database (Denmark)

    Oguoma, V. M.; Nwose, E. U.; Skinner, T. C.

    2016-01-01

    BACKGROUND: The current anthropometric indices used for diagnosis of cardio-metabolic syndrome (CMS) in sub-Saharan Africa are those widely validated in the western world. We hereby aim to compare the sensitivity and specificity of these tools in identifying risk factors for CMS. METHOD: The study...

  1. Measuring corruption indicators and indices

    OpenAIRE

    MALITO, Debora Valentina

    2014-01-01

    This Working Paper is a background paper delivered to frame the workshop ‘Global Governance by Indicators: Measuring corruption and corruption indicators’ convened by the Global Governance Programme of the European University Institute in Florence on 17 and 18 October 2013. Successively it was developed further in EUI RSCAS WP 2014/37 - http://hdl.handle.net/1814/30582 The development of more sophisticated corruption measures has been stimulated by consistent and compelling demands for mor...

  2. Thermal comfort

    CSIR Research Space (South Africa)

    Osburn, L

    2010-01-01

    Full Text Available wider range of temperature limits, saving energy while still satisfying the majority of building occupants. It is also noted that thermal comfort varies significantly between individuals and it is generally not possible to provide a thermal environment...

  3. HIV indicator condition-guided testing to reduce the number of undiagnosed patients and prevent late presentation in a high-prevalence area: a case-control study in primary care

    NARCIS (Netherlands)

    Joore, Ivo K.; Arts, Derk L.; Kruijer, Marjan J. P.; Moll van Charante, Eric P.; Geerlings, Suzanne E.; Prins, Jan M.; van Bergen, Jan Eam

    2015-01-01

    Recent guidelines advocate accelerated provider-initiated HIV testing by general practitioners (GPs). We aimed to identify the number of patient consultations in six general practices in the South-East of Amsterdam, and the incidence of HIV indicator conditions reported in their medical files prior

  4. ThermalTracker Software

    Energy Technology Data Exchange (ETDEWEB)

    2016-08-10

    The software processes recorded thermal video and detects the flight tracks of birds and bats that passed through the camera's field of view. The output is a set of images that show complete flight tracks for any detections, with the direction of travel indicated and the thermal image of the animal delineated. A report of the descriptive features of each detected track is also output in the form of a comma-separated value text file.

  5. Thermal Stress

    Science.gov (United States)

    2011-01-01

    and Science in Sports and Exercise 37: 1328--1334. Coris EE, Ramirez AM, and Van Durme DJ (2004) Heat illness in athletes : The dangerous combination...of heat, humidity and exercise. Sports Medicine 34: 9--16. Gordon CJ and Leon LR (2005) Thermal stress and the physiological response to environmental...code) 2011 Book Chapter-Enc. of Environmental Health Thermal Stress L.R. Leon, C.J. Gordon Thermal and Mountain Medicine Division U.S. Research

  6. Thermal conductivity and thermal diffusivity

    International Nuclear Information System (INIS)

    Hust, J.G.

    1983-01-01

    This chapter examines the heat transfer properties of solids, with emphasis on the behavior of pure metals and alloys. Topics considered include electronic conduction, magnetic field effects, lattice conduction, measuring methods, specimen size, uncertainty, thermal anchoring, radial heat loss, thermal conductivity apparatus, thermal diffusivity apparatus, empirical correlations, the Wiedemann-Franz-Lorenz law, Matthiessen's rule, low-temperature correlation, predictive techniques, crystalline dielectrics, and disordered dielectrics. The materials examined include copper, aluminium, binary alloys, structural alloys, and structural composites

  7. Measurement of thermal conductance

    International Nuclear Information System (INIS)

    Kuchnir, M.

    1977-01-01

    The 6-m long, 45-kG, warm-iron superconducting magnets envisioned for the Energy Doubler stage of the Fermilab accelerator require stiff supports with minimized thermal conductances in order to keep the refrigeration power reasonable. The large number of supports involved in the system required a careful study of their heat conduction from the room temperature wall to the intercepting refrigeration at 20 0 K and to the liquid helium. For this purpose the thermal conductance of this support was measured by comparing it with the thermal conductance of a copper strap of known geometry. An association of steady-state thermal analysis and experimental thermal conductivity techniques forms the basis of this method. An important advantage is the automatic simulation of the 20 0 K refrigeration intercept by the copper strap, which simplifies the apparatus considerably. This relative resistance technique, which uses electrical analogy as a guideline, is applicable with no restrictions for materials with temperature-independent thermal conductivity. For other materials the results obtained are functions of the specific temperature interval involved in the measurements. A comprehensive review of the literature on thermal conductivity indicates that this approach has not been used before. A demonstration of its self-consistency is stressed here rather than results obtained for different supports

  8. Thermal insulation

    International Nuclear Information System (INIS)

    Pinsky, G.P.

    1977-01-01

    Thermal insulation for vessels and piping within the reactor containment area of nuclear power plants is disclosed. The thermal insulation of this invention can be readily removed and replaced from the vessels and piping for inservice inspection, can withstand repeated wettings and dryings, and can resist high temperatures for long periods of time. 4 claims, 3 figures

  9. Thermal behaviour of Anopheles stephensi in response to infection with malaria and fungal entomopathogens

    Directory of Open Access Journals (Sweden)

    Read Andrew F

    2009-04-01

    Full Text Available Abstract Background Temperature is a critical determinant of the development of malaria parasites in mosquitoes, and hence the geographic distribution of malaria risk, but little is known about the thermal preferences of Anopheles. A number of other insects modify their thermal behaviour in response to infection. These alterations can be beneficial for the insect or for the infectious agent. Given current interest in developing fungal biopesticides for control of mosquitoes, Anopheles stephensi were examined to test whether mosquitoes showed thermally-mediated behaviour in response to infection with fungal entomopathogens and the rodent malaria, Plasmodium yoelii. Methods Over two experiments, groups of An. stephensi were infected with one of three entomopathogenic fungi, and/or P. yoelii. Infected and uninfected mosquitoes were released on to a thermal gradient (14 – 38°C for "snapshot" assessments of thermal preference during the first five days post-infection. Mosquito survival was monitored for eight days and, where appropriate, oocyst prevalence and intensity was assessed. Results and conclusion Both infected and uninfected An. stephensi showed a non-random distribution on the gradient, indicating some capacity to behaviourally thermoregulate. However, chosen resting temperatures were not altered by any of the infections. There is thus no evidence that thermally-mediated behaviours play a role in determining malaria prevalence or that they will influence the performance of fungal biopesticides against adult Anopheles.

  10. Thermal comfort indices in individual shelters for dairy calves with different types of roofs Ambiente térmico no interior de abrigos individuais para bezerros com a utilização de diferentes tipos de coberturas

    Directory of Open Access Journals (Sweden)

    Patrícia C. de F Fonseca

    2011-12-01

    Full Text Available Among the building materials used in rural facilities, roofs are noteworthy for being largely responsible for thermal comfort, influencing the thermal balance within the shelter. This study aimed to evaluate the influence of roof on the Enthalpy (H, Thermal Load of Radiation (TLR, and Black Globe Temperature and Humidity Index (BGHI in individual shelters for dairy calves. The design was completely randomized with three treatments: Z - zinc tile, AC - asbestos-cement tile and ACW - asbestos-cement tile painted white on the upper side. The averages were compared by the Scott Knott test at 1% probability. The results showed no statistical difference between treatments (PDentre os materiais de construção utilizados nas instalações rurais, merecem destaque as coberturas, pois são grandes responsáveis pelo conforto térmico, influenciando no balanço térmico no interior das instalações. Este trabalho objetivou avaliar a influência das coberturas sobre a entalpia (H, Carga Térmica Radiante (CTR e no Índice de Temperatura de Globo Negro e Umidade (ITGU, em abrigos individuais para bezerros leiteiros. O delineamento foi o inteiramente casualizado com três tratamentos: Z - telha de zinco; CA - telha de cimento amianto, e CAB - telha de cimento amianto pintada de branco na face superior. As médias foram comparadas pelo teste de Scott Knott, a 1% de probabilidade. Os resultados mostraram que não houve diferença estatística entre os tratamentos (P<0,01 e o ambiente externo, para a H. Para a CTR, houve diferença estatística entre todos os tratamentos, em que CAB demonstrou menor CTR, 489,28 W m-², seguido do tratamento CA, 506,72 W m-², e Z com maior valor de CTR, 523,55 W m-². Para o ITGU, observaram-se menores valores para CAB (76,8 e CA (77,4, diferindo-se, significativamente do Z, que obteve maior valor (81,6. As telhas com pintura branca em sua face superior promoveram menor CTR e menor ITGU, favorecendo o ambiente térmico da

  11. Thermal springs of Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    Breckenridge, R.M.; Hinckley, B.S.

    1978-01-01

    This bulletin attempts, first, to provide a comprehensive inventory of the thermal springs of Wyoming; second, to explore the geologic and hydrologic factors producing these springs; and, third, to analyze the springs collectively as an indicator of the geothermal resources of the state. A general discussion of the state's geology and the mechanisms of thermal spring production, along with a brief comparison of Wyoming's springs with worldwide thermal features are included. A discussion of geothermal energy resources, a guide for visitors, and an analysis of the flora of Wyoming's springs follow the spring inventory. The listing and analysis of Wyoming's thermal springs are arranged alphabetically by county. Tabulated data are given on elevation, ownership, access, water temperature, and flow rate. Each spring system is described and its history, general characteristics and uses, geology, hydrology, and chemistry are discussed. (MHR)

  12. Thermal imaging in medicine

    Directory of Open Access Journals (Sweden)

    Jaka Ogorevc

    2015-12-01

    Full Text Available AbstractIntroduction: Body temperature monitoring is one of the oldest and still one of the most basic diagnostic methods in medicine. In recent years thermal imaging has been increasingly used in measurements of body temperature for diagnostic purposes. Thermal imaging is non-invasive, non-contact method for measuring surface body temperature. Method is quick, painless and patient is not exposed to ionizing radiation or any other body burden.Application of thermal imaging in medicine: Pathological conditions can be indicated as hyper- or hypothermic patterns in many cases. Thermal imaging is presented as a diagnostic method, which can detect such thermal anomalies. This article provides an overview of the thermal imaging applications in various fields of medicine. Thermal imaging has proven to be a suitable method for human febrile temperature screening, for the detection of sites of fractures and infections, a reliable diagnostic tool in the detection of breast cancer and determining the type of skin cancer tumour. It is useful in monitoring the course of a therapy after spinal cord injury, in the detection of food allergies and detecting complications at hemodialysis and is also very effective at the course of treatment of breast reconstruction after mastectomy. With thermal imaging is possible to determine the degrees of burns and early detection of osteomyelitis in diabetic foot phenomenon. The most common and the oldest application of thermal imaging in medicine is the field of rheumatology.Recommendations for use and standards: Essential performance of a thermal imaging camera, measurement method, preparation of a patient and environmental conditions are very important for proper interpretation of measurement results in medical applications of thermal imaging. Standard for screening thermographs was formed for the human febrile temperature screening application.Conclusion: Based on presented examples it is shown that thermal imaging can

  13. Vesta surface thermal properties map

    Science.gov (United States)

    Capria, Maria Teresa; Tosi, F.; De Santis, Maria Cristina; Capaccioni, F.; Ammannito, E.; Frigeri, A.; Zambon, F; Fonte, S.; Palomba, E.; Turrini, D.; Titus, T.N.; Schroder, S.E.; Toplis, M.J.; Liu, J.Y.; Combe, J.-P.; Raymond, C.A.; Russell, C.T.

    2014-01-01

    The first ever regional thermal properties map of Vesta has been derived from the temperatures retrieved by infrared data by the mission Dawn. The low average value of thermal inertia, 30 ± 10 J m−2 s−0.5 K−1, indicates a surface covered by a fine regolith. A range of thermal inertia values suggesting terrains with different physical properties has been determined. The lower thermal inertia of the regions north of the equator suggests that they are covered by an older, more processed surface. A few specific areas have higher than average thermal inertia values, indicative of a more compact material. The highest thermal inertia value has been determined on the Marcia crater, known for its pitted terrain and the presence of hydroxyl in the ejecta. Our results suggest that this type of terrain can be the result of soil compaction following the degassing of a local subsurface reservoir of volatiles.

  14. Variation in thermally induced taste response across thermal tasters.

    Science.gov (United States)

    Skinner, Martha; Eldeghaidy, Sally; Ford, Rebecca; Giesbrecht, Timo; Thomas, Anna; Francis, Susan; Hort, Joanne

    2018-02-01

    Thermal tasters (TTs) perceive thermally induced taste (thermal taste) sensations when the tongue is stimulated with temperature in the absence of gustatory stimuli, while thermal non tasters (TnTs) only perceive temperature. This is the first study to explore detailed differences in thermal taste responses across TTs. Using thermal taster status phenotyping, 37 TTs were recruited, and the temporal characteristics of thermal taste responses collected during repeat exposure to temperature stimulation. Phenotyping found sweet most frequently reported during warming stimulation, and bitter and sour when cooling, but a range of other sensations were stated. The taste quality, intensity, and number of tastes reported greatly varied. Furthermore, the temperature range when thermal taste was perceived differed across TTs and taste qualities, with some TTs perceiving a taste for a small temperature range, and others the whole trial. The onset of thermal sweet taste ranged between 22 and 38°C during temperature increase. This supports the hypothesis that TRPM5 may be involved in thermal sweet taste perception as TRPM5 is temperature activated between 15 and 35°C, and involved in sweet taste transduction. These findings also raised questions concerning the phenotyping protocol and classification currently used, thus indicating the need to review practices for future testing. This study has highlighted the hitherto unknown variation that exists in thermal taste response across TTs, provides some insights into possible mechanisms, and importantly emphasises the need for more research into this sensory phenomenon. Copyright © 2018. Published by Elsevier Inc.

  15. A geospatial risk assessment model for leprosy in Ethiopia based on environmental thermal-hydrological regime analysis

    Directory of Open Access Journals (Sweden)

    Azeb Tadesse Argaw

    2006-11-01

    Full Text Available Geospatial methods were used to study the associations of the environmental thermal-hydrological regime with leprosy prevalence in the Oromia and Amhara regions of Ethiopia. Prediction models were developed that indicated leprosy prevalence was related to: (i long-term normal climate grid data on temperature and moisture balance (rain/potential evapo-transpiration; (ii satellite surveillance data on the Normalized Difference Vegetation Index (NDVI and daytime earth surface temperature (Tmax from the Advanced Very High Resolution Radiometer (AVHRR; and (iii a Genetic Algorithm Rule-Set Prediction (GARP model based on NDVI and Tmax data in relation to leprosy prevalence data. Our results suggest that vertical transmission is not the only means of acquiring leprosy and support earlier reports that a major factor that governs transmission of leprosy is the viability of Mycobacterium leprae outside the human body which is related to the thermal-hydrologic regime of the environment.

  16. The relationship between anthropometric indices and ...

    African Journals Online (AJOL)

    The relationship between anthropometric indices and gastrointestinal helminth infection in primary school children of Batagarawa Local Government Area, Katsina ... poor personal hygiene and lack of knowledge favoured increase in the prevalence of infection, disease prevalence may have an effect the BMI of the children.

  17. NOHSS Adult Indicators - 2010 And Prior BRFSS

    Data.gov (United States)

    U.S. Department of Health & Human Services — Data from BRFSS for indicators of adult oral health for 1999 and even years from 2002 through 2010. National estimates are represented by the median prevalence among...

  18. Prevalence and indicators of HIV and AIDS among adults admitted ...

    African Journals Online (AJOL)

    Despite high seroprevalence there are few recent studies of the effect of HIV on hospitals in sub-Saharan Africa. We examined 1226 consecutive patients admitted during two 2-week periods in October 1999 and January 2000. 70% medical patients were HIV positive, and 45% had AIDS. 36% surgical patients were HIV ...

  19. Thermal comfort

    DEFF Research Database (Denmark)

    d’Ambrosio Alfano, Francesca Romana; Olesen, Bjarne W.; Palella, Boris Igor

    2014-01-01

    Thermal comfort is one of the most important aspects of the indoor environmental quality due to its effects on well-being, people's performance and building energy requirements. Its attainment is not an easy task requiring advanced design and operation of building and HVAC systems, taking...... and operators to navigate the complex and varied world of standards in the field of thermal environment for improving indoor environmental quality and energy saving. The examples discussed in the paper will also be useful for the standardization, leading to harmonized documents more readable for all users....... into account all parameters involved. Even though thermal comfort fundamentals are consolidated topics for more than forty years, often designers seem to ignore or apply them in a wrong way. Design input values from standards are often considered as universal values rather than recommended values to be used...

  20. Matrix thermalization

    Energy Technology Data Exchange (ETDEWEB)

    Craps, Ben [Theoretische Natuurkunde, Vrije Universiteit Brussel (VUB), and International Solvay Institutes, Pleinlaan 2, B-1050 Brussels (Belgium); Evnin, Oleg [Department of Physics, Faculty of Science, Chulalongkorn University, Thanon Phayathai, Pathumwan, Bangkok 10330 (Thailand); Theoretische Natuurkunde, Vrije Universiteit Brussel (VUB), and International Solvay Institutes, Pleinlaan 2, B-1050 Brussels (Belgium); Nguyen, Kévin [Theoretische Natuurkunde, Vrije Universiteit Brussel (VUB), and International Solvay Institutes, Pleinlaan 2, B-1050 Brussels (Belgium)

    2017-02-08

    Matrix quantum mechanics offers an attractive environment for discussing gravitational holography, in which both sides of the holographic duality are well-defined. Similarly to higher-dimensional implementations of holography, collapsing shell solutions in the gravitational bulk correspond in this setting to thermalization processes in the dual quantum mechanical theory. We construct an explicit, fully nonlinear supergravity solution describing a generic collapsing dilaton shell, specify the holographic renormalization prescriptions necessary for computing the relevant boundary observables, and apply them to evaluating thermalizing two-point correlation functions in the dual matrix theory.

  1. Thermal Arc Spray Overview

    Science.gov (United States)

    Hafiz Abd Malek, Muhamad; Hayati Saad, Nor; Kiyai Abas, Sunhaji; Mohd Shah, Noriyati

    2013-06-01

    Usage of protective coating for corrosion protection was on highly demand during the past decade; and thermal spray coating played a major part during that time. In recent years, the thermal arc spray coating becomes a popular coating. Many big players in oil and gas such as PETRONAS, EXXON MOBIL and SHELL in Malaysia tend to use the coating on steel structure as a corrosion protection. Further developments in coating processes, the devices, and raw materials have led to expansion of functional coatings and applications scope from conventional coating to specialized industries. It is widely used because of its ability to withstand high process temperature, offer advantages in efficiency, lower cost and acts as a corrosion protection. Previous research also indicated that the thermal arc spray offers better coating properties compared to other methods of spray. This paper reviews some critical area of thermal spray coating by discussing the process/parameter of thermal arc spray technology and quality control of coating. Coating performance against corrosion, wear and special characteristic of coating are also described. The field application of arc spray technology are demonstrated and reviewed.

  2. Determination of delta9-tetrahydrocannabinol in indoor air as an indicator of marijuana cigarette smoking using adsorbent sampling and in-injector thermal desorption gas chromatography-mass spectrometry.

    Science.gov (United States)

    Chou, Su-Lien; Ling, Yong-Chien; Yang, Mo-Hsiung; Pai, Chung-Yen

    2007-08-13

    The marijuana leaves are usually mixed with tobaccos and smoked at amusement places in Taiwan. Recently, for investigation-legal purposes, the police asked if we can identify the marijuana smoke in a KTV stateroom (a private room at the entertainment spot for singing, smoking, alcohol drinking, etc.) without marijuana residues. A personal air-sampler pump fitted with the GC liner-tube packed with Tenax-TA adsorbent was used for air sampling. The GC-adsorbent tube was placed in the GC injector port and desorbed directly, followed by GC-MS analysis for the determination of delta9-tetrahydrocannabinol (delta9-THC) in indoor air. The average desorption efficiency and limit of detection for delta9-THC were 89% and 0.1 microg m(-3), respectively, approximately needing 1.09 mg of marijuana leaves smoked in an unventilated closed room (3.0 m x 2.4 m x 2.7 m) to reach this level. The mean delta9-THC contained in the 15 marijuana plants seized from diverse locations was measured to be 0.32%. The delta9-THC in room air can be successfully identified from mock marijuana cigarettes, mixtures of marijuana and tobacco, and an actual case. The characteristic delta9-THC peak in chromatogram can serve as the indicator of marijuana. Positive result suggests marijuana smoking at the specific scene in the recent past, facilitating the formulation of further investigation.

  3. Detecting thermally driven cyclic deformation of an exfoliation sheet with lidar and radar

    Science.gov (United States)

    Collins, Brian D.; Stock, Greg M.

    2014-01-01

    Rock falls from steep, exfoliating cliffs are common in many landscapes. Of the many mechanisms known to trigger rock falls, thermally driven deformation is among the least quantified, despite potentially being a prevalent trigger due to its occurrence at all times of year. Here we present the results of a field-based monitoring program using instrumentation, ground-based lidar, and ground-based radar to investigate the process of thermally driven deformation of an exfoliation sheet, and the ability of remote sensing tools to capture cyclic expansion and contraction patterns. Our results indicate that thermally driven exfoliation occurs on diurnal cycles and can be measured at the submillimeter to centimeter scale using high-resolution strain gauges, short-range (2 km) radar interfer-ometry.

  4. Thermal Clothing

    Science.gov (United States)

    1997-01-01

    Gateway Technologies, Inc. is marketing and developing textile insulation technology originally developed by Triangle Research and Development Corporation. The enhanced thermal insulation stems from Small Business Innovation Research contracts from NASA's Johnson Space Center and the U.S. Air Force. The effectiveness of the insulation comes from the microencapsulated phase-change materials originally made to keep astronauts gloved hands warm. The applications for the product range from outer wear, housing insulation, and blankets to protective firefighting gear and scuba diving suits. Gateway has developed and begun marketing thermal regulating products under the trademark, OUTLAST. Products made from OUTLAST are already on the market, including boot and shoe liners, winter headgear, hats and caps for hunting and other outdoor sports, and a variety of men's and women's ski gloves.

  5. Solar thermal

    International Nuclear Information System (INIS)

    Jones, J.

    2006-01-01

    While wind power is widely acknowledged as the most developed of the 'new' renewables, the number two technology, in terms of installed capacity functioning worldwide, is solar heating, or solar thermal. The author has investigated recent industry reports on how these markets are developing. The authors of an International Energy Agency (IEA) survey studied 41 countries in depth at the end of 2004, revealing that 141 million m 3 - corresponding to an installed capacity of 98.4 GWth - were installed in the sample countries (these nations represent 3.74 billion people, about 57% of the world's population). The installed capacity within the areas studied represents approximately 85%-90% of the solar thermal market worldwide. The use of solar heating varies greatly between countries - even close neighbours - and between economic regions. Its uptake often has more to do with policy than solar resource. There is also different uptake of technology. In China, Europe and Japan, plants with flat-plate and evacuated tube collectors are used, mainly to heat water and for space heating. Unglazed plastic collectors, used mainly for swimming pool heating, meanwhile, dominate the North American markets. Though the majority of solar heating installations today are installed on domestic rooftops, the larger-scale installations should not be overlooked. One important part of the market is the hotel sector - in particular hotels in locations that serve the seasonal summer holiday market, where solar is extremely effective. Likewise hospitals and residential homes, multi-family apartment blocks and sports centres are all good examples of places where solar thermal can deliver results. There are also a growing number of industrial applications, where solar thermal can meet the hot water needs (and possibly more) of a range of industries, such as food processing and agriculture. The ability of solar to provide a heat source for cooling is expected to become increasingly important as

  6. Thermal countercurrents in centrifuges

    International Nuclear Information System (INIS)

    Soubbaramayer

    1975-06-01

    A linear theory is assumed for the thermal countercurrent in a gas centrifuge. Some approximations about the viscous forces are made, and it is shown that the problem reduces to that of searching for the eigenvalues and eigenfunctions of a fourth order linear differential operator. Calculations indicate that zero axial velocity occurs at 87 per cent of the radius. It is also shown that the efficiency K is 85 per cent. (author)

  7. Thermal Performance Benchmarking: Annual Report

    Energy Technology Data Exchange (ETDEWEB)

    Feng, Xuhui [National Renewable Energy Laboratory (NREL), Golden, CO (United States). Transportation and Hydrogen Systems Center

    2017-10-19

    In FY16, the thermal performance of the 2014 Honda Accord Hybrid power electronics thermal management systems were benchmarked. Both experiments and numerical simulation were utilized to thoroughly study the thermal resistances and temperature distribution in the power module. Experimental results obtained from the water-ethylene glycol tests provided the junction-to-liquid thermal resistance. The finite element analysis (FEA) and computational fluid dynamics (CFD) models were found to yield a good match with experimental results. Both experimental and modeling results demonstrate that the passive stack is the dominant thermal resistance for both the motor and power electronics systems. The 2014 Accord power electronics systems yield steady-state thermal resistance values around 42- 50 mm to the 2nd power K/W, depending on the flow rates. At a typical flow rate of 10 liters per minute, the thermal resistance of the Accord system was found to be about 44 percent lower than that of the 2012 Nissan LEAF system that was benchmarked in FY15. The main reason for the difference is that the Accord power module used a metalized-ceramic substrate and eliminated the thermal interface material layers. FEA models were developed to study the transient performance of 2012 Nissan LEAF, 2014 Accord, and two other systems that feature conventional power module designs. The simulation results indicate that the 2012 LEAF power module has lowest thermal impedance at a time scale less than one second. This is probably due to moving low thermally conductive materials further away from the heat source and enhancing the heat spreading effect from the copper-molybdenum plate close to the insulated gate bipolar transistors. When approaching steady state, the Honda system shows lower thermal impedance. Measurement results of the thermal resistance of the 2015 BMW i3 power electronic system indicate that the i3 insulated gate bipolar transistor module has significantly lower junction

  8. Thermally stimulated properties of amber

    International Nuclear Information System (INIS)

    Bowlt, C.

    1983-01-01

    Thermoelectrets yielded thermally stimulated currents but radioelectrets could not be produced even following exposures of 16000 R of ionising radiation. It is concluded that the thermally stimulated currents are due to the depolarisation of dipoles, with activation energy of 1.4 +- 0.1 eV, rather than to discharge of trapped charge carriers. Amber exhibits thermal luminescence following exposure to light of lambda < 500 nm but not to ionising radiation after exposures up to 5500 R, indicating localised impurity/trap/recombination complexes in the specimen surface, with a trap depth of 1.5 +- 0.1 eV. (author)

  9. Thermal properties

    Science.gov (United States)

    Roger M. Rowell

    2005-01-01

    The traditional question at the start of a class on thermal properties of wood is, “Does wood burn?” The students have all been warmed in front of a wood-burning fire before, so they are sure the answer is yes—but since the professor asked the question, there must be some hidden trick to the obvious answer. Going with their experience, their answer is “yes, wood burns...

  10. Thermal insulator

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, R.; Asada, Y.; Matsuo, Y.; Mikoda, M.

    1985-07-16

    A thermal insulator comprises an expanded resin body having embedded therein an evacuated powder insulation portion which consists of fine powder and a container of film-like plastics or a film-like composite of plastics and metal for enclosing the powder. The resin body has been expanded by a Freon gas as a blowing agent. Since a Freon gas has a larger molecular diameter than the constituent gases of air, it is less likely to permeate through the container than air. Thus present invention provides a novel composite insulator which fully utilizes the benefits of vacuum insulation without necessitating a strong and costly material for a vacuum container.

  11. Heat transfer and thermal stress analysis in grooved tubes

    Indian Academy of Sciences (India)

    The maximum thermal stress ratio positions inside the tube have been indicated as MX for all investigated cases. In the light of the thermal stress values, various designs can be applied to reduce thermal stress in grooved tubes. Keywords. Heat transfer; thermal stress; grooved tubes. 1. Introduction. Heat transfer in pipe flow ...

  12. Effects of thermal fluctuations on thermal inflation

    OpenAIRE

    Hiramatsu, Takashi; Miyamoto, Yuhei; Yokoyama, Jun'ichi

    2014-01-01

    The mechanism of thermal inflation, a relatively short period of accelerated expansion after primordial inflation, is a desirable ingredient for a certain class of particle physics models if they are not to be in contention with the cosmology of the early Universe. Though thermal inflation is most simply described in terms of a thermal effective potential, a thermal environment also gives rise to thermal fluctuations that must be taken into account. We numerically study the effects of these ...

  13. Thermal energy storage apparatus, controllers and thermal energy storage control methods

    Science.gov (United States)

    Hammerstrom, Donald J.

    2016-05-03

    Thermal energy storage apparatus, controllers and thermal energy storage control methods are described. According to one aspect, a thermal energy storage apparatus controller includes processing circuitry configured to access first information which is indicative of surpluses and deficiencies of electrical energy upon an electrical power system at a plurality of moments in time, access second information which is indicative of temperature of a thermal energy storage medium at a plurality of moments in time, and use the first and second information to control an amount of electrical energy which is utilized by a heating element to heat the thermal energy storage medium at a plurality of moments in time.

  14. Thermalization through parton transport

    International Nuclear Information System (INIS)

    Zhang Bin

    2010-01-01

    A radiative transport model is used to study kinetic equilibration during the early stage of a relativistic heavy ion collision. The parton system is found to be able to overcome expansion and move toward thermalization via parton collisions. Scaling behaviors show up in both the pressure anisotropy and the energy density evolutions. In particular, the pressure anisotropy evolution shows an approximate α s scaling when radiative processes are included. It approaches an asymptotic time evolution on a time scale of 1 to 2 fm/c. The energy density evolution shows an asymptotic time evolution that decreases slower than the ideal hydro evolution. These observations indicate that partial thermalization can be achieved and viscosity is important for the evolution during the early longitudinal expansion stage of a relativistic heavy ion collision.

  15. Eutectic mixtures of some fatty acids for latent heat storage: Thermal properties and thermal reliability with respect to thermal cycling

    Energy Technology Data Exchange (ETDEWEB)

    Sari, Ahmet [Department of Chemistry, Gaziosmanpasa University, 60240 Tokat (Turkey)]. E-mail: asari@gop.edu.tr

    2006-06-15

    Accelerated thermal cycle tests have been conducted to study the change in melting temperatures and latent heats of fusion of the eutectic mixtures of lauric acid (LA)-myristic acid (MA), lauric acid (LA)-palmitic acid (PA) and myristic acid (MA)-stearic acid (SA) as latent heat storage materials. The thermal properties of these materials were determined by the differential scanning calorimetry (DSC) analysis method. The thermal reliability of the eutectic mixtures after melt/freeze cycles of 720, 1080 and 1460 was also evaluated using the DSC curves. The accelerated thermal cycle tests indicate that the melting temperatures usually tend to decrease, and the variations in the latent heats of fusion are irregular with increasing number of thermal cycles. Moreover, the probable reasons for the change in thermal properties of the eutectic mixtures after repeated thermal cycles were investigated. Fourier Transform Infrared (FT-IR) spectroscopic analysis indicates that the accelerated melt/freeze processes do not cause any degradation in the chemical structure of the mixtures. The change in thermal properties of the eutectic mixtures with increasing number of thermal cycles is only because of the presence of certain amounts of impurities in the fatty acids used in their preparation. It is concluded that the tested eutectic mixtures have reasonable thermal properties and thermal reliability as phase change materials (PCMs) for latent heat storage in any solar heating applications that include a four year utilization period.

  16. Eutectic mixtures of some fatty acids for latent heat storage: Thermal properties and thermal reliability with respect to thermal cycling

    International Nuclear Information System (INIS)

    Sari, Ahmet

    2006-01-01

    Accelerated thermal cycle tests have been conducted to study the change in melting temperatures and latent heats of fusion of the eutectic mixtures of lauric acid (LA)-myristic acid (MA), lauric acid (LA)-palmitic acid (PA) and myristic acid (MA)-stearic acid (SA) as latent heat storage materials. The thermal properties of these materials were determined by the differential scanning calorimetry (DSC) analysis method. The thermal reliability of the eutectic mixtures after melt/freeze cycles of 720, 1080 and 1460 was also evaluated using the DSC curves. The accelerated thermal cycle tests indicate that the melting temperatures usually tend to decrease, and the variations in the latent heats of fusion are irregular with increasing number of thermal cycles. Moreover, the probable reasons for the change in thermal properties of the eutectic mixtures after repeated thermal cycles were investigated. Fourier Transform Infrared (FT-IR) spectroscopic analysis indicates that the accelerated melt/freeze processes do not cause any degradation in the chemical structure of the mixtures. The change in thermal properties of the eutectic mixtures with increasing number of thermal cycles is only because of the presence of certain amounts of impurities in the fatty acids used in their preparation. It is concluded that the tested eutectic mixtures have reasonable thermal properties and thermal reliability as phase change materials (PCMs) for latent heat storage in any solar heating applications that include a four year utilization period

  17. Single-electron thermal noise.

    Science.gov (United States)

    Nishiguchi, Katsuhiko; Ono, Yukinori; Fujiwara, Akira

    2014-07-11

    We report the observation of thermal noise in the motion of single electrons in an ultimately small dynamic random access memory (DRAM). The nanometer-scale transistors that compose the DRAM resolve the thermal noise in single-electron motion. A complete set of fundamental tests conducted on this single-electron thermal noise shows that the noise perfectly follows all the aspects predicted by statistical mechanics, which include the occupation probability, the law of equipartition, a detailed balance, and the law of kT/C. In addition, the counting statistics on the directional motion (i.e., the current) of the single-electron thermal noise indicate that the individual electron motion follows the Poisson process, as it does in shot noise.

  18. The prevalence of known diabetes in eight European countries.

    NARCIS (Netherlands)

    Fleming, D.M.; Schellevis, F.G.; Casteren, V. van

    2004-01-01

    The prevalence of diabetes has been proposed as a European Community Health Indicator. The prevalence of diabetes known to general practitioners (GPs) in different European countries has been investigated and the usefulness of sentinel practice networks in delivering prevalence data on diabetes has

  19. Geomagnetic Indices Bulletin (GIB)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Geomagnetic Indices Bulletin is a one page sheet containing the magnetic indices Kp, Ap, Cp, An, As, Am and the provisional aa indices. The bulletin is published...

  20. Seasonal thermal energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Allen, R.D.; Kannberg, L.D.; Raymond, J.R.

    1984-05-01

    This report describes the following: (1) the US Department of Energy Seasonal Thermal Energy Storage Program, (2) aquifer thermal energy storage technology, (3) alternative STES technology, (4) foreign studies in seasonal thermal energy storage, and (5) economic assessment.

  1. Characterization of pool thermal stratification in the San Joaquin River system

    Science.gov (United States)

    Butler, N. L.; Hunt, J. R.

    2013-12-01

    Temperature is a critical water quality parameter for Chinook salmon (Oncorhynchus tshawystcha) and is a potentially limiting factor for the successful reintroduction of Chinook into the San Joaquin River system. When ambient stream water temperatures exceed salmon thermal tolerances, salmon seek out cooler water in pools as thermal refuge. While current models of the San Joaquin River can estimate ambient surface water temperature, vertical variations in pool temperature are unknown and not modeled. This study measured river pool thermal stratification in the San Joaquin River system to assess available thermal refuge and identify the key drivers of thermal stratification in this system. During July 2012, daytime vertical water temperature profiles were measured in 53 river pools to survey the prevalence of thermal stratification in the San Joaquin River system from the Mariposa Bypass to the its confluence with the Merced River. Between September and November 2012 six of the pools that exhibited thermal stratification during July were instrumented with water temperature sensor arrays and piezometers. The water temperature sensor arrays were constructed by attaching sensors at regular intervals to the exterior of a PVC pipe to measure the vertical water temperature in the pool and into the sediment. Additionally, piezometers determined pool water head along with pressure head at two different depths into the sediment. Sensor arrays were setup for a minimum of two weeks at each site with sensors recording data every 15 minutes. Thermal stratification occurred in 82% of the 53 pools surveyed in the San Joaquin River during July. Pool depths ranged from 0.64 m to 6.37 m with an average depth of 2.09 m. Differences in vertical water temperature ranged from less than 3 °C to 11.4 °C with an average water temperature difference of 4.2 °C. Vertical water temperature differences did not correlate with pool depth. In the six pools instrumented for two weeks, thermal

  2. Graphene Thermal Properties: Applications in Thermal Management and Energy Storage

    Directory of Open Access Journals (Sweden)

    Jackie D. Renteria

    2014-11-01

    Full Text Available We review the thermal properties of graphene, few-layer graphene and graphene nanoribbons, and discuss practical applications of graphene in thermal management and energy storage. The first part of the review describes the state-of-the-art in the graphene thermal field focusing on recently reported experimental and theoretical data for heat conduction in graphene and graphene nanoribbons. The effects of the sample size, shape, quality, strain distribution, isotope composition, and point-defect concentration are included in the summary. The second part of the review outlines thermal properties of graphene-enhanced phase change materials used in energy storage. It is shown that the use of liquid-phase-exfoliated graphene as filler material in phase change materials is promising for thermal management of high-power-density battery parks. The reported experimental and modeling results indicate that graphene has the potential to outperform metal nanoparticles, carbon nanotubes, and other carbon allotropes as filler in thermal management materials.

  3. Natural selection on thermal performance in a novel thermal environment.

    Science.gov (United States)

    Logan, Michael L; Cox, Robert M; Calsbeek, Ryan

    2014-09-30

    Tropical ectotherms are thought to be especially vulnerable to climate change because they are adapted to relatively stable temperature regimes, such that even small increases in environmental temperature may lead to large decreases in physiological performance. One way in which tropical organisms may mitigate the detrimental effects of warming is through evolutionary change in thermal physiology. The speed and magnitude of this response depend, in part, on the strength of climate-driven selection. However, many ectotherms use behavioral adjustments to maintain preferred body temperatures in the face of environmental variation. These behaviors may shelter individuals from natural selection, preventing evolutionary adaptation to changing conditions. Here, we mimic the effects of climate change by experimentally transplanting a population of Anolis sagrei lizards to a novel thermal environment. Transplanted lizards experienced warmer and more thermally variable conditions, which resulted in strong directional selection on thermal performance traits. These same traits were not under selection in a reference population studied in a less thermally stressful environment. Our results indicate that climate change can exert strong natural selection on tropical ectotherms, despite their ability to thermoregulate behaviorally. To the extent that thermal performance traits are heritable, populations may be capable of rapid adaptation to anthropogenic warming.

  4. Worldwide prevalence of hypospadias.

    Science.gov (United States)

    Springer, A; van den Heijkant, M; Baumann, S

    2016-06-01

    Hypospadias is a common congenital malformation. Surgical repair and management of the long-term consequences require a substantial amount of socioeconomic resources. It is generally accepted that genetic and environmental factors play a major role in the etiology of hypospadias. There have been contradictory reports on rising hypospadias rates, and regional and ethnical differences. The exact prevalence of hypospadias is of major interest for healthcare providers, clinical medicine, and research. To review the literature regarding the worldwide prevalence of hypospadias. Pubmed, EMBASE and Google were systematically screened for: hypospadias, congenital malformation, anomaly, incidence, prevalence, and epidemiology. Exclusion criteria were surgical and risk-factor studies. To give an additional comprehensive overview, prevalence data were harvested from the Annual Report of the International Clearinghouse Centre for Birth Defects Surveillance and Research. Prevalence was reported as per 10,000 live births. Data were available from 1910 to 2013. The median study period was 9 years (range: 1-36 years). Approximately 90,255,200 births have been screened in all studies. The mean prevalence were: Europe 19.9 (range: 1-464), North America 34.2 (6-129.8), South America 5.2 (2.8-110), Asia 0.6-69, Africa 5.9 (1.9-110), and Australia 17.1-34.8. There were major geographical, regional, and ethnical differences, with an extreme heterogeneity of published studies. Numerous studies showed an increasing prevalence; on the other hand, there were a lot of contradictory data on the prevalence of hypospadias. The summary table shows contradictory data from the five largest international studies available. There was huge literature available on the prevalence of hypospadias. Most data derived from Europe and North America. Many methodological factors influenced the calculation of an accurate prevalence, and even more of the true changes in prevalence over time (no generally accepted

  5. CREDIT Performance Indicator Framework

    DEFF Research Database (Denmark)

    Frandsen, Anne Kathrine; Bertelsen, Niels Haldor; Haugbølle, Kim

    2010-01-01

    was a framework of indicators relevant in building and real estate and applicable in the Nordic and Baltic countries as well as a proposal for a set of key indicators. The study resulting in CREDIT Performance Indicator Framework has been based on 28 case studies of evaluation practises in the building and real...... regulations in the countries participating in CREDIT. The Performance Indicator Framework encompassed 187 indicators grouped in 7 main groups of indicators and 42 sub-groups. Based on the CREDIT case studies it was concluded that there neither is link between certain indicators and specific building types...

  6. Thermal decomposition of natural dolomite

    Indian Academy of Sciences (India)

    TECS

    SEM observation of the heat-treated samples at 950°C shows cluster of grains, indicating the structural transformation. Keywords. TGA–DTA; FTIR; X-ray diffraction; dolomite. 1. Introduction. Dolomite typically occurs as the major constituent of sedimentary formations in association with calcite. Thermal analysis might offer ...

  7. Pain prevalence in hospitalized children

    DEFF Research Database (Denmark)

    Walther-Larsen, S; Pedersen, M T; Friis, S M

    2017-01-01

    BACKGROUND: Pain management in hospitalized children is often inadequate. The prevalence and main sources of pain in Danish university hospitals is unknown. METHODS: This prospective mixed-method cross-sectional survey took place at four university hospitals in Denmark. We enrolled 570 pediatric...... patients who we asked to report their pain experience and its management during the previous 24 hours. For patients identified as having moderate to severe pain, patient characteristics and analgesia regimes were reviewed. RESULTS: Two hundred and thirteen children (37%) responded that they had experienced...... pain in the previous 24 hours. One hundred and thirty four (24%) indicated moderate to severe pain and 43% would have preferred an intervention to alleviate the pain. In children hospitalized for more than 24 hours, the prevalence of moderate/severe pain was significantly higher compared to children...

  8. Thermal Ignition

    Science.gov (United States)

    Boettcher, Philipp Andreas

    Accidental ignition of flammable gases is a critical safety concern in many industrial applications. Particularly in the aviation industry, the main areas of concern on an aircraft are the fuel tank and adjoining regions, where spilled fuel has a high likelihood of creating a flammable mixture. To this end, a fundamental understanding of the ignition phenomenon is necessary in order to develop more accurate test methods and standards as a means of designing safer air vehicles. The focus of this work is thermal ignition, particularly auto-ignition with emphasis on the effect of heating rate, hot surface ignition and flame propagation, and puffing flames. Combustion of hydrocarbon fuels is traditionally separated into slow reaction, cool flame, and ignition regimes based on pressure and temperature. Standard tests, such as the ASTM E659, are used to determine the lowest temperature required to ignite a specific fuel mixed with air at atmospheric pressure. It is expected that the initial pressure and the rate at which the mixture is heated also influences the limiting temperature and the type of combustion. This study investigates the effect of heating rate, between 4 and 15 K/min, and initial pressure, in the range of 25 to 100 kPa, on ignition of n-hexane air mixtures. Mixtures with equivalence ratio ranging from 0.6 to 1.2 were investigated. The problem is also modeled computationally using an extension of Semenov's classical auto-ignition theory with a detailed chemical mechanism. Experiments and simulations both show that in the same reactor either a slow reaction or an ignition event can take place depending on the heating rate. Analysis of the detailed chemistry demonstrates that a mixture which approaches the ignition region slowly undergoes a significant modification of its composition. This change in composition induces a progressive shift of the explosion limit until the mixture is no longer flammable. A mixture that approaches the ignition region

  9. A thermal engine for underwater glider driven by ocean thermal energy

    International Nuclear Information System (INIS)

    Yang, Yanan; Wang, Yanhui; Ma, Zhesong; Wang, Shuxin

    2016-01-01

    Highlights: • Thermal engine with a double-tube structure is developed for underwater glider. • Isostatic pressing technology is effective to increase volumetric change rate. • Actual volumetric change rate reaches 89.2% of the theoretical value. • Long term sailing of 677 km and 27 days is achieved by thermal underwater glider. - Graphical Abstract: - Abstract: Underwater glider is one of the most popular platforms for long term ocean observation. Underwater glider driven by ocean thermal energy extends the duration and range of underwater glider powered by battery. Thermal engine is the core device of underwater glider to harvest ocean thermal energy. In this paper, (1) model of thermal engine was raised by thermodynamics method and the performance of thermal engine was investigated, (2) thermal engine with a double-tube structure was developed and isostatic pressing technology was applied to improve the performance for buoyancy driven, referencing powder pressing theory, (3) wall thickness of thermal engine was optimized to reduce the overall weight of thermal engine, (4) material selection and dimension determination were discussed for a faster heat transfer design, by thermal resistance analysis, (5) laboratory test and long term sea trail were carried out to test the performance of thermal engine. The study shows that volumetric change rate is the most important indicator to evaluating buoyancy-driven performance of a thermal engine, isostatic pressing technology is effective to improve volumetric change rate, actual volumetric change rate can reach 89.2% of the theoretical value and the average power is about 124 W in a typical diving profile. Thermal engine developed by Tianjin University is a superior thermal energy conversion device for underwater glider. Additionally, application of thermal engine provides a new solution for miniaturization of ocean thermal energy conversion.

  10. UV "Indices"-What Do They Indicate?

    Science.gov (United States)

    Moshammer, Hanns; Simic, Stana; Haluza, Daniela

    2016-10-24

    Ultra-Violet (UV) radiation covers the spectrum of wavelengths from 100 to 400 nm. The potency and biological activity for a variety of endpoints differ by wavelength. For monitoring and communication purposes, different UV action spectra have been developed. These spectra use different weighting functions. The action spectrum for erythemal dose is the most widely used one. This erythemal dose per time or dose-rate has been further simplified into a "UV index". Following this example, in our review we use the term "index" or (plural) "indices" in a more general description for all simplified single-value measures for any biologically effective UV dose, e.g., for human non-melanoma skin cancer and for previtamin D production rate. Ongoing discussion about the existence of an increased melanoma risk due to UV-A exposure underscores the uncertainties inherent in current weighting functions. Thus, we performed an online literature search to review the data basis for these indices, to understand their relevance for an individual, and to assess the applicability of the indices for a range of exposure scenarios. Even for natural (solar) UV, the spectral composition varies spatially and temporally. Artificial UV sources and personal protection introduce further variation to the spectral composition. Many biological effects are proposed for UV radiation. Only few endpoints have been studied sufficiently to estimate a reliable index. Weighting functions for chronic effects and most importantly for cancer endpoints have been developed in animal models, and often for proxy endpoints only. Epidemiological studies on biological effects of UV radiation should not only depend on single-value weighted UV dose estimates (indexes) but should strive for a more detailed description of the individual exposure. A better understanding of the adverse and beneficial effects of UV radiation by wavelength would also improve medical counseling and health communication regarding individual

  11. Climate Change or Land Use Dynamics: Do We Know What Climate Change Indicators Indicate?

    OpenAIRE

    Clavero, Miguel; Villero, Daniel; Brotons, Lluís

    2011-01-01

    Different components of global change can have interacting effects on biodiversity and this may influence our ability to detect the specific consequences of climate change through biodiversity indicators. Here, we analyze whether climate change indicators can be affected by land use dynamics that are not directly determined by climate change. To this aim, we analyzed three community-level indicators of climate change impacts that are based on the optimal thermal environment and average latitu...

  12. Preparation, thermal properties and thermal reliability of microencapsulated n-eicosane as novel phase change material for thermal energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Alkan, Cemil; Sari, Ahmet; Karaipekli, Ali [Department of Chemistry, Gaziosmanpasa University, 60240 Tokat (Turkey)

    2011-01-15

    This study deals with preparation, characterization, thermal properties and thermal reliability of n-eicosane microcapsules as novel phase change material (PCM) for thermal energy storage. The microcapsulated PCMs were prepared by coating n-eicosane with polymethylmethacrylate (PMMA) shell. Fourier transform infrared (FT-IR), scanning electron microscope (SEM) and particle size distribution (PSD) analysis were used to characterize the PMMA/eicosane microcapsules as microcapsulated PCMs. The PSD analysis indicated that the average diameter of microcapsules was found to be 0.70 {mu}m under the stirring speed of 2000 rpm. Thermal properties and thermal reliability of the microcapsules were determined using differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA) methods. From DSC analysis, the melting and freezing temperatures and the latent heats of the microcapsules were measured as 35.2 C and 34.9 C, 84.2 and -87.5 J/g, respectively. TGA analysis indicated that PMMA/eicosane microcapsules degrade in three steps at considerably high temperatures. Accelerated thermal cycling tests have been also applied to show the thermal reliability of the microcapsules. All results showed that thermal properties make the PMMA/eicosane microcapsules potential PCM for thermal energy storage. (author)

  13. Amblyopia risk factor prevalence.

    Science.gov (United States)

    Arnold, Robert W

    2013-01-01

    In 2003, the American Association for Pediatric Ophthalmology and Strabismus (AAPOS) published a set of risk factors for amblyopia. The intent was to promote uniformity of reporting and development in screening. Because this prevalence is not yet known, this meta-analysis is an attempt to estimate it. Major community preschool eye examination studies were reviewed and AAPOS cut-offs estimated. The approximate prevalence of anisometropia is 1.2%, hyperopia is 6%, astigmatism is 15%, myopia is 0.6%, strabismus is 2.5%, and visual acuity less than 20/40 is 6%. The mean combined prevalence is 21% ± 2% compared to a prevalence of amblyopia 20/40 and worse of 2.5%. Knowing risk factor prevalence simplifies validation efforts. Amblyopia screening with a risk factor sensitivity less than 100% is expected and desirable. Copyright 2013, SLACK Incorporated.

  14. Geomagnetic aa Indices

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The geomagnetic aa indices are the continuation of the series beginning in the year 1868. A full description of these indices is given in the International...

  15. Prevalencia de fisura labiopalatina e indicadores de riesgo: Estudio de la población atendida en el Hospital Clínico Félix Bulnes de Santiago de Chile Prevalence of cleft lip and palate and risk indicators: Study of the reference population of Felix Bulnes University Hospital, Santiago de Chile

    Directory of Open Access Journals (Sweden)

    G. Sepúlveda Troncoso

    2008-02-01

    Full Text Available Introducción. El estudio de la prevalencia de fisuras labiopalatinas y la determinación de indicadores de riesgo ayuda a prevenir su ocurrencia mejorando las condiciones durante la concepción o gestación. También favorece diagnósticos precoces que atenúan el impacto emocional favoreciendo el apego madre-hijo y mejorando la respuesta materna al tratamiento. Ambas situaciones permiten optimizar y focalizar los recursos sanitarios disponibles. Material y Método. Se determinó la incidencia de fisuras labiopalatinas y la asociación a factores de riesgo en los RNV beneficiarios del Hospital Clínico Félix Bulnes de Santiago de Chile entre enero del año 1998 y junio del 2005. Se estudió además condiciones y exposición maternas a agentes ambientales asociados a fisura labial y/o palatina. Resultados. Sobre un total de 36.041 RNV consecutivos, se registraron 51 casos de fisurados, obteniéndose una tasa de 1,42 x 1000 RNV. Conclusiones. Los indicadores de riesgo identificados correspondieron a edad materna menor a veinte años asociado al primer embarazo; alto grado de etnicidad amerindia e historia familiar positiva para este tipo de malformación. Nuestro estudio apoya la teoría de herencia multifactorial de la susceptibilidad a las fisuras labiopalatinas.Introduction. The study of the prevalence of cleft lip and palate and the identification of risk groups helps to improve the treatment of this condition. Occurrence may be prevented by improving environmental conditions during pregnancy and ensuring early diagnosis, thus lessening the emotional impact on the family and reinforcing the early mother-child bond. The aim of this study was to improve prevention levels and thus enhance health resources. Material and Method. The frequency of cleft lip and palate and its association with risk factors was studied in live births of the Felix Bulnes University Hospital in Santiago between January 1998 and June 2005. Maternal conditions and

  16. environmental stress indicators system

    African Journals Online (AJOL)

    EJIRO

    TESs =TELd/As = (DMI+DPO+2HF-I)/As. (7). From the above-mentioned calculated Formulas (4) (5) (7), it can be observed that TESg, TESn and TESs can help construct a country's total carried environmental stress via the material flow indicators. Ecological footprint intensity indicators and ecological overshoot indicators.

  17. NRC performance indicator program

    International Nuclear Information System (INIS)

    Singh, R.N.

    1987-01-01

    The performance indicator development work of the US Nuclear Regulatory Commission (NRC) interoffice task group involved several major activities that included selection of candidate indicators for a trial program, data collection and review, validation of the trial indicators, display method development, interactions with the industry, and selection of an optimum set of indicators for the program. After evaluating 27 potential indicators against certain ideal attributes, the task group selected 17 for the trial program. The pertinent data for these indicators were then collected from 50 plants at 30 sites. The validation of the indicators consisted of two primary processes: logical validity and statistical analysis. The six indicators currently in the program are scrams, safety system actuations, significant events, safety system failures, forced outage rate, and equipment forced outages per 100 critical hours. A report containing data on the six performance indicators and some supplemental information is issued on a quarterly basis. The NRC staff is also working on refinements of existing indicators and development of additional indicators as directed by the commission

  18. CREDIT Performance Indicator Framework

    DEFF Research Database (Denmark)

    Frandsen, Anne Kathrine; Bertelsen, Niels Haldor; Haugbølle, Kim

    2010-01-01

    was a framework of indicators relevant in building and real estate and applicable in the Nordic and Baltic countries as well as a proposal for a set of key indicators. The study resulting in CREDIT Performance Indicator Framework has been based on 28 case studies of evaluation practises in the building and real...... estate sector each addressing three interlinked levels: building/ projects level, company or enterprise level and benchmarking system level. Additionally it has been based on dialogue with researchers and professional organisation, international research and standardisation work and national building...... regulations in the countries participating in CREDIT. The Performance Indicator Framework encompassed 187 indicators grouped in 7 main groups of indicators and 42 sub-groups. Based on the CREDIT case studies it was concluded that there neither is link between certain indicators and specific building types...

  19. Thermal ecology program

    International Nuclear Information System (INIS)

    Murphy, J.C.; Esch, G.W.; Gentry, J.B.

    1975-01-01

    Progress is reported in the following areas of research: effects of thermal effluents on body condition, species diversity, reproduction, growth, and parasitism of fish; fish diversity in post-thermal habitats; effects of thermal effluents on snails and aquatic insects; distribution of macrophyte communities along a shore-line temperature gradient; growth and genetic variation in cattail in thermally altered environments; and population dynamics of thermally resistant plants in a swamp receiving reactor effluent. (U.S.)

  20. Studies on thermal degradation kinetics of thermal and UV cured N-(4-hydroxy phenyl) maleimide derivatives

    International Nuclear Information System (INIS)

    Pitchaimari, G.; Vijayakumar, C.T.

    2014-01-01

    Graphical abstract: - Highlights: • UV cure materials are more thermally stable than the thermally cured materials. • Cyanate ester functionalization offers better thermal stability. • The Ea values for Poly NVPs are low compared to other materials investigated. • The UV cured materials showed higher Ea values than the thermally cured materials. - Abstract: The results of the studies concerning the thermal and photo initiated copolymerization of N-(4-acryloyloxy phenyl) maleimide (AX), N-(4-methacryloyloxy phenyl) maleimide (MAX) and N-(4-cyanato phenyl) maleimide (CNX) with N-vinyl-2-pyrrolidone (NVP) were presented. The structures of all the copolymers prepared were confirmed by FTIR studies. The thermogravimetric studies of both the thermal and UV cured materials indicated that the UV cured materials were comparatively thermally more stable than the thermally polymerized materials during thermal degradation. Of all the materials investigated, liquid composition having NVP and CNX cured by UV irradiation showed better thermal stability. The degradation kinetic studies using Flynn–Wall–Ozawa, Vyazovkin and Friedman methods showed that the activation energies (Ea) for the thermal degradation of polymeric materials cured by UV irradiation were slightly higher than the Ea values calculated for the thermally polymerized materials

  1. Thermal Flow Sensors for Harsh Environments

    Science.gov (United States)

    Dinh, Toan; Dao, Dzung Viet

    2017-01-01

    Flow sensing in hostile environments is of increasing interest for applications in the automotive, aerospace, and chemical and resource industries. There are thermal and non-thermal approaches for high-temperature flow measurement. Compared to their non-thermal counterparts, thermal flow sensors have recently attracted a great deal of interest due to the ease of fabrication, lack of moving parts and higher sensitivity. In recent years, various thermal flow sensors have been developed to operate at temperatures above 500 °C. Microelectronic technologies such as silicon-on-insulator (SOI), and complementary metal-oxide semiconductor (CMOS) have been used to make thermal flow sensors. Thermal sensors with various heating and sensing materials such as metals, semiconductors, polymers and ceramics can be selected according to the targeted working temperature. The performance of these thermal flow sensors is evaluated based on parameters such as thermal response time, flow sensitivity. The data from thermal flow sensors reviewed in this paper indicate that the sensing principle is suitable for the operation under harsh environments. Finally, the paper discusses the packaging of the sensor, which is the most important aspect of any high-temperature sensing application. Other than the conventional wire-bonding, various novel packaging techniques have been developed for high-temperature application. PMID:28885595

  2. Thermal Flow Sensors for Harsh Environments

    Directory of Open Access Journals (Sweden)

    Vivekananthan Balakrishnan

    2017-09-01

    Full Text Available Flow sensing in hostile environments is of increasing interest for applications in the automotive, aerospace, and chemical and resource industries. There are thermal and non-thermal approaches for high-temperature flow measurement. Compared to their non-thermal counterparts, thermal flow sensors have recently attracted a great deal of interest due to the ease of fabrication, lack of moving parts and higher sensitivity. In recent years, various thermal flow sensors have been developed to operate at temperatures above 500 °C. Microelectronic technologies such as silicon-on-insulator (SOI, and complementary metal-oxide semiconductor (CMOS have been used to make thermal flow sensors. Thermal sensors with various heating and sensing materials such as metals, semiconductors, polymers and ceramics can be selected according to the targeted working temperature. The performance of these thermal flow sensors is evaluated based on parameters such as thermal response time, flow sensitivity. The data from thermal flow sensors reviewed in this paper indicate that the sensing principle is suitable for the operation under harsh environments. Finally, the paper discusses the packaging of the sensor, which is the most important aspect of any high-temperature sensing application. Other than the conventional wire-bonding, various novel packaging techniques have been developed for high-temperature application.

  3. Thermal Flow Sensors for Harsh Environments.

    Science.gov (United States)

    Balakrishnan, Vivekananthan; Phan, Hoang-Phuong; Dinh, Toan; Dao, Dzung Viet; Nguyen, Nam-Trung

    2017-09-08

    Flow sensing in hostile environments is of increasing interest for applications in the automotive, aerospace, and chemical and resource industries. There are thermal and non-thermal approaches for high-temperature flow measurement. Compared to their non-thermal counterparts, thermal flow sensors have recently attracted a great deal of interest due to the ease of fabrication, lack of moving parts and higher sensitivity. In recent years, various thermal flow sensors have been developed to operate at temperatures above 500 °C. Microelectronic technologies such as silicon-on-insulator (SOI), and complementary metal-oxide semiconductor (CMOS) have been used to make thermal flow sensors. Thermal sensors with various heating and sensing materials such as metals, semiconductors, polymers and ceramics can be selected according to the targeted working temperature. The performance of these thermal flow sensors is evaluated based on parameters such as thermal response time, flow sensitivity. The data from thermal flow sensors reviewed in this paper indicate that the sensing principle is suitable for the operation under harsh environments. Finally, the paper discusses the packaging of the sensor, which is the most important aspect of any high-temperature sensing application. Other than the conventional wire-bonding, various novel packaging techniques have been developed for high-temperature application.

  4. Thermal energy storage and transport

    Science.gov (United States)

    Hausz, W.

    1980-01-01

    The extraction of thermal energy from large LWR and coal fired plants for long distance transport to industrial and residential/commercial users is analyzed. Transport of thermal energy as high temperature water is shown to be considerably cheaper than transport as steam, hot oil, or molten salt over a wide temperature range. The delivered heat is competitive with user-generated heat from oil, coal, or electrode boilers at distances well over 50 km when the pipeline operates at high capacity factor. Results indicate that thermal energy storage makes meeting of even very low capacity factor heat demands economic and feasible and gives the utility flexibility to meet coincident electricity and heat demands effectively.

  5. Prevalence of obesity in Denmark

    DEFF Research Database (Denmark)

    Due, P; Heitmann, B L; Sørensen, T I A

    2007-01-01

    There has been a pronounced, distinctive increase of the prevalence of obesity within almost all age groups of the Danish population, during the last 25-30 years. The largest increase has been documented in studies based on objective data from total populations and the latest data show the increase...... will continue. The Danish studies show heterogeneity in the development of the obesity epidemic. A close association with birth cohorts indicates a need for further aetiological research, not only into behavioural factors, but also into early life factors that may explain some of this developmental pattern....

  6. Climate Change Indicators

    Science.gov (United States)

    Presents information, charts and graphs showing measured climate changes across 40 indicators related to greenhouse gases, weather and climate, oceans, snow and ice, heath and society, and ecosystems.

  7. Chemical calcium indicators.

    Science.gov (United States)

    Paredes, R Madelaine; Etzler, Julie C; Watts, Lora Talley; Zheng, Wei; Lechleiter, James D

    2008-11-01

    Our understanding of the underlying mechanisms of Ca2+ signaling as well as our appreciation for its ubiquitous role in cellular processes has been rapidly advanced, in large part, due to the development of fluorescent Ca2+ indicators. In this chapter, we discuss some of the most common chemical Ca2+ indicators that are widely used for the investigation of intracellular Ca2+ signaling. Advantages, limitations and relevant procedures will be presented for each dye including their spectral qualities, dissociation constants, chemical forms, loading methods and equipment for optimal imaging. Chemical indicators now available allow for intracellular Ca2+ detection over a very large range (50 microM). High affinity indicators can be used to quantify Ca2+ levels in the cytosol while lower affinity indicators can be optimized for measuring Ca2+ in subcellular compartments with higher concentrations. Indicators can be classified into either single wavelength or ratiometric dyes. Both classes require specific lasers, filters, and/or detection methods that are dependent upon their spectral properties and both classes have advantages and limitations. Single wavelength indicators are generally very bright and optimal for Ca2+ detection when more than one fluorophore is being imaged. Ratiometric indicators can be calibrated very precisely and they minimize the most common problems associated with chemical Ca2+ indicators including uneven dye loading, leakage, photobleaching, and changes in cell volume. Recent technical advances that permit in vivo Ca2+ measurements will also be discussed.

  8. Development and integration of programmatic performance indicators

    International Nuclear Information System (INIS)

    Modarres, M.; Wrethall, J.; Appignani, P.L.

    1989-01-01

    This paper describes the results of an evaluation of maintenance-related programmatic performance indicators, and summarizes the direction being taken in a new project to integrate indirect performance indicators for nuclear power plants. Programmatic indicators allow NRC to monitor, at a distance, trends in functional activities before a significant impact appears on safety. Previously presented work described the selection of candidate performance indicators associated with maintenance for continued analysis. This evaluation focused on two aspects of the selected indicators: (1) an evaluation of the state of maintenance programs in the narrative text of SALP reports versus the frequencies of inadvertent ESF actuations from test and maintenance errors; and (2) an evaluation of alternative methods for analyzing the thermal performance of plants as an integral indicator of maintenance program effectiveness. 1 ref., 1 fig

  9. Global thermal coal trade outlook

    International Nuclear Information System (INIS)

    Ewart, E.

    2008-01-01

    Wood Mackenzie operates coal consulting offices in several cities around the world and is the number one consulting company in terms of global coal coverage. The company offers a unique mine-by-mine research methodology, and owns a proprietary modeling system for coal and power market forecasting. This presentation provided an overview of global thermal markets as well as recent market trends. Seaborne markets have an impact on price far greater than the volume of trade would imply. Research has also demonstrated that the global thermal coal market is divided between the Pacific and Atlantic Basins. The current status of several major coal exporting countries such as Canada, the United States, Venezuela, Colombia, Indonesia, Australia, China, South Africa, and Russia was displayed in an illustration. The presentation included several graphs indicating that the seaborne thermal coal market is highly concentrated; traditional coal flow and pricing trends shift as Asian demand growth and supply constraints lead to chronic under supply; coal prices have risen to historic highs in recent times; and, the Asian power sector demand is a major driver of future growth. The correlation between oil and gas markets to thermal coal was illustrated along with two scenarios of coal use in the United States in a carbon-constrained world. The impact of carbon legislation on coal demand from selected coal regions in the United States was also discussed. Wood Mackenzie forecasts a very strong growth in global thermal coal demand, driven largely by emerging Asian economies. tabs., figs

  10. Indicators of sustainable tourism

    Directory of Open Access Journals (Sweden)

    Jovičić Dobrica

    2010-01-01

    Full Text Available The indicators, precisely describing the linkages between tourism and the environment, social and cultural base, are not easily available. How ever, some relevant organizations (WTO, EU, OECD, etc., institutions and experts, have been hardly working to create the indicators of sustainable tourism. Whereas the economic objectives are easily defined by the use of the traditional indicators used in national and business economics, it is very difficult to identify widely applicable environmental, social and cultural indicators. In order to stimulate and alleviate the process of sustainable tourism development, EU created the list of comparative indicators of sustainable tourism. In preparing this list, special attention is paid to identification of valid indicators of real tourism impacts on the social and cultural environment (the entire set of traditions, customs, history, hospitality and culture that characterize a given area, that is a very complex task. Assuming the fact that the related indicators have been analyzed in many European countries, this paper is focused on applying the related indicators in research of tourism development in villages of the Kosjerić community. .

  11. eHealth indicators

    DEFF Research Database (Denmark)

    HYPPÖNEN, Hannele; AMMENWERTH, Elske; Nøhr, Christian

    2012-01-01

    eHealth indicators are needed to measure defined aspects of national eHealth implementations. However, until now, eHealth indicators are ambiguous or unclear. Therefore, an expert workshop "Towards an International Minimum Dataset for Monitoring National Health Information System Implementations...... in management of eHealth systems....

  12. Key performance indicators

    NARCIS (Netherlands)

    Zwetsloot, G.I.J.M.

    2014-01-01

    This paper addresses how organisations can use OSH performance indicators. This is an important way to mainstream OSH into business management. Key performance indicators (KPIs) should provide objective data on the OSH situation. It is often said that ‘what gets measured gets managed’. Without

  13. Quality indicators in radiotherapy

    International Nuclear Information System (INIS)

    Cionini, Luca; Gardani, Gianstefano; Gabriele, Pietro; Magri, Secondo; Morosini, Pier Luigi; Rosi, Antonella; Viti, Vincenza

    2007-01-01

    Background and purpose: There is a widespread and increasing tendency to develop hospital performance indicators in the field of accreditation/certification systems and quality benchmarking. A study has been undertaken to develop a set of performance indicators for a typical radiotherapy Centre and to evaluate their ability to provide a continuous quality improvement. Materials and methods: A working group consisting of radiation oncologists, medical physicists and radiation technologists under the coordination of experts in health technology assessment has elaborated a set of general indicators able to monitor performances and the quality level of a typical radiotherapy Centre. The work has been carried out through four steps: a preliminary set of indicators was selected; data on these indicators were collected in a number of Italian radiotherapy Centres and medical physics Services; problems in collection and analysis of data were discussed; a final set of indicators was developed. Results: A final set of 13 indicators is here presented. They concern general structural and/or operational features, health physics activities and accuracy and technical complexity of the treatment. Conclusions: The indicators tested in a few Italian Centres of radiotherapy and medical physics Services are now ready to be utilized by a larger community

  14. Indications for colonoscopy

    African Journals Online (AJOL)

    the procedure and the diagnostic yield, and to evaluate the suitability of colonoscopy for each indication. The seven major indications were rectal bleeding, iron deficiency anaemia, cancer follow-up, polyp follow-up, abdominal pain, abnormal bowel habit and 'other'. Four hundred and forty-eight procedures were included ...

  15. VP Ellipsis without Indices

    DEFF Research Database (Denmark)

    Hardt, Daniel; Asher, Nicholas; Hunter, Julie

    2013-01-01

    . On the process view, an index is not a syntactic object at all, but rather, an indication of the output of a resolution process.In this paper we argue that a recent body of data provides a clear empirical basis for distinguishing between these two views of indices. We argue that cases of sloppy VP ellipsis pose...

  16. Diagnostic indices for vertiginous diseases

    Directory of Open Access Journals (Sweden)

    Warninghoff Jan-Christian

    2010-10-01

    Full Text Available Abstract Background Vertigo and dizziness are symptoms which are reported frequently in clinical practice. We aimed to develop diagnostic indices for four prevalent vertiginous diseases: benign paroxysmal positional vertigo (BPPV, Menière's disease (MD, vestibular migraine (VM, and phobic postural vertigo (PPV. Methods Based on a detailed questionnaire handed out to consecutive patients presenting for the first time in our dizziness clinic we preselected a set of seven questions with desirable diagnostic properties when compared with the final diagnosis after medical workup. Using exact logistic regression analysis diagnostic scores, each comprising of four to six items that can simply be added up, were built for each of the four diagnoses. Results Of 193 patients 131 questionnaires were left after excluding those with missing consent or data. Applying the suggested cut-off points, sensitivity and specificity were 87.5 and 93.5% for BPPV, 100 and 87.4% for MD, 92.3 and 83.7% for VM, 73.7 and 84.1% for PPV, respectively. By changing the cut-off points sensitivity and specificity can be adjusted to meet diagnostic needs. Conclusions The diagnostic indices showed promising diagnostic properties. Once further validated, they could provide an ease to use and yet flexible tool for screening vertigo in clinical practice and epidemiological research.

  17. Diagnostic indices for vertiginous diseases

    Science.gov (United States)

    2010-01-01

    Background Vertigo and dizziness are symptoms which are reported frequently in clinical practice. We aimed to develop diagnostic indices for four prevalent vertiginous diseases: benign paroxysmal positional vertigo (BPPV), Menière's disease (MD), vestibular migraine (VM), and phobic postural vertigo (PPV). Methods Based on a detailed questionnaire handed out to consecutive patients presenting for the first time in our dizziness clinic we preselected a set of seven questions with desirable diagnostic properties when compared with the final diagnosis after medical workup. Using exact logistic regression analysis diagnostic scores, each comprising of four to six items that can simply be added up, were built for each of the four diagnoses. Results Of 193 patients 131 questionnaires were left after excluding those with missing consent or data. Applying the suggested cut-off points, sensitivity and specificity were 87.5 and 93.5% for BPPV, 100 and 87.4% for MD, 92.3 and 83.7% for VM, 73.7 and 84.1% for PPV, respectively. By changing the cut-off points sensitivity and specificity can be adjusted to meet diagnostic needs. Conclusions The diagnostic indices showed promising diagnostic properties. Once further validated, they could provide an ease to use and yet flexible tool for screening vertigo in clinical practice and epidemiological research. PMID:20973968

  18. Sustainability, Indicators, and Institutions of Higher Education. Chapter 42

    Science.gov (United States)

    Indicators of commitment to sustainability commonly applied to institutions of higher education provide no estimate of the actual effects that these institutions have on the persistence or prevalence of the socioecological systems that encompass them. Emergy methodology provides ...

  19. Thermal diffusivity effect in opto-thermal skin measurements

    International Nuclear Information System (INIS)

    Xiao, P; Imhof, R E; Cui, Y; Ciortea, L I; Berg, E P

    2010-01-01

    We present our latest study on the thermal diffusivity effect in opto-thermal skin measurements. We discuss how thermal diffusivity affects the shape of opto-thermal signal, and how to measure thermal diffusivity in opto-thermal measurements of arbitrary sample surfaces. We also present a mathematical model for a thermally gradient material, and its corresponding opto-thermal signal. Finally, we show some of our latest experimental results of this thermal diffusivity effect study.

  20. Evaluating Living Standard Indicators

    Directory of Open Access Journals (Sweden)

    Birčiaková Naďa

    2015-09-01

    Full Text Available This paper deals with the evaluation of selected available indicators of living standards, divided into three groups, namely economic, environmental, and social. We have selected six countries of the European Union for analysis: Bulgaria, the Czech Republic, Hungary, Luxembourg, France, and Great Britain. The aim of this paper is to evaluate indicators measuring living standards and suggest the most important factors which should be included in the final measurement. We have tried to determine what factors influence each indicator and what factors affect living standards. We have chosen regression analysis as our main method. From the study of factors, we can deduce their impact on living standards, and thus the value of indicators of living standards. Indicators with a high degree of reliability include the following factors: size and density of population, health care and spending on education. Emissions of carbon dioxide in the atmosphere also have a certain lower degree of reliability.

  1. Indicators and their functions

    DEFF Research Database (Denmark)

    Gudmundsson, Henrik; Joumard, Robert; Aschemann, Ralf

    2010-01-01

    This report is the final report of the action COST 356 'EST - Towards the definition of a measurable environmentally sustainable transport'. It tries to answer the following questions: How can environmental impacts of transport be measured? How can measurements be transformed into operational...... indicators? How can several indicators be jointly considered? And how can indicators be used in planning and decision making? Firstly we provide definition of 'indicator of environmental sustainability in transport'. The functions, strengths and weaknesses of indicators as measurement tools, and as decision...... support tools are discussed. We define what "environmental sustainability in transport" may mean through the transport system, the concepts of sustainable development and of environment. The concept of 'chain of causality' between a source and a final target is developed, as a common reference...

  2. Thermal stress mitigation by Active Thermal Control

    DEFF Research Database (Denmark)

    Soldati, Alessandro; Dossena, Fabrizio; Pietrini, Giorgio

    2017-01-01

    This work proposes an Active Thermal Control (ATC) of power switches. Leveraging on the fact that thermal stress has wide impact on the system reliability, controlling thermal transients is supposed to lengthen the lifetime of electronic conversion systems. Indeed in some environments......, such as transportation, reliability and lifetime are still obstacles to widespread adoption of electric and electronic actuators, despite a general trend of electrification spreading in many different areas of interest. Active thermal control is attained leaving the electric parameters of load untouched, while acting...... results of control schemes are presented, together with evaluation of the proposed loss models. Experimental proof of the ability of the proposed control to reduce thermal swing and related stress on the device is presented, too....

  3. Brazilian laboratory indicators program.

    Science.gov (United States)

    Shcolnik, Wilson; de Oliveira, Carla Albuquerque; de São José, Adriana Sá; de Oliveira Galoro, César Alex; Plebani, Mario; Burnett, David

    2012-11-01

    This paper describes the evolution, structure, operation and some outcomes of the Brazilian Laboratory Indicators Program created by the Brazilian Society of Clinical Pathology/Laboratory Medicine (Sociedade Brasileira de Patologia Clínica/Medicina Laboratorial, or SBPC/ML), in partnership with ControlLab, a Brazilian Company that provides services for proficiency testing, internal control, calibration, and training indicators for clinical laboratories. This web-based program is confidential for all participants. It contains 61 indicators categorized into three groups. Program operation and data analysis methods are described and indicators are reported in box plot format, with grouping varying in accordance with the profiles of the participating laboratories. Three indicators were selected as examples of program effectiveness in 2011: hemolysis, blood re-collection and productivity. Participants profile, examples of three indicators for the year 2011 (hemolysis, blood re-collection and productivity) and exploratory research conducted in 2012 on the implementation of the program are presented. Data related to laboratories participating in the program from 2006 to 2011 were collected and graphically represented. The Brazilian Laboratory Indicators Program brings important benefits for participants, contributing to the improvement of existing health systems in Brazil.

  4. Core damage risk indicators

    International Nuclear Information System (INIS)

    Szikszai, T.

    1994-01-01

    The purpose of this document is to show a method for the fast recalculation of the PSA. To avoid the information loose, it is necessary to simplify the PSA models, or at least reorganize them. The method, introduced in this document, require that preparation, so we try to show, how to do that. This document is an introduction. This is the starting point of the work related to the development of the risk indicators. In the future, with the application of this method, we are going to show an everyday use of the PSA results to produce the indicators of the core damage risk. There are two different indicators of the plant safety performance, related to the core damage risk. The first is the core damage frequency indicator (CDFI), and the second is the core damage probability indicator (CDPI). Of course, we cannot describe all of the possible ways to use these indicators, rather we will try to introduce the requirements to establish such an indicator system and the calculation process

  5. Thermal conductivity enhancement in thermal grease containing different CuO structures.

    Science.gov (United States)

    Yu, Wei; Zhao, Junchang; Wang, Mingzhu; Hu, Yiheng; Chen, Lifei; Xie, Huaqing

    2015-01-01

    Different cupric oxide (CuO) structures have attracted intensive interest because of their promising applications in various fields. In this study, three kinds of CuO structures, namely, CuO microdisks, CuO nanoblocks, and CuO microspheres, are synthesized by solution-based synthetic methods. The morphologies and crystal structures of these CuO structures are characterized by field-emission scanning electron microscope and X-ray diffractometer, respectively. They are used as thermal conductive fillers to prepare silicone-based thermal greases, giving rise to great enhancement in thermal conductivity. Compared with pure silicone base, the thermal conductivities of thermal greases with CuO microdisks, CuO nanoblocks, and CuO microspheres are 0.283, 0256, and 0.239 W/mK, respectively, at filler loading of 9 vol.%, which increases 139%, 116%, and 99%, respectively. These thermal greases present a slight descendent tendency in thermal conductivity at elevated temperatures. These experimental data are compared with Nan's model prediction, indicating that the shape factor has a great influence on thermal conductivity improvement of thermal greases with different CuO structures. Meanwhile, due to large aspect ratio of CuO microdisks, they can form thermal networks more effectively than the other two structures, resulting in higher thermal conductivity enhancement.

  6. Envisioning, quantifying, and managing thermal regimes on river networks

    Science.gov (United States)

    Steel, E. Ashley; Beechie, Timothy J.; Torgersen, Christian; Fullerton, Aimee H.

    2017-01-01

    Water temperatures fluctuate in time and space, creating diverse thermal regimes on river networks. Temporal variability in these thermal landscapes has important biological and ecological consequences because of nonlinearities in physiological reactions; spatial diversity in thermal landscapes provides aquatic organisms with options to maximize growth and survival. However, human activities and climate change threaten to alter the dynamics of riverine thermal regimes. New data and tools can identify particular facets of the thermal landscape that describe ecological and management concerns and that are linked to human actions. The emerging complexity of thermal landscapes demands innovations in communication, opens the door to exciting research opportunities on the human impacts to and biological consequences of thermal variability, suggests improvements in monitoring programs to better capture empirical patterns, provides a framework for suites of actions to restore and protect the natural processes that drive thermal complexity, and indicates opportunities for better managing thermal landscapes.

  7. Safety performance indicators program

    International Nuclear Information System (INIS)

    Vidal, Patricia G.

    2004-01-01

    In 1997 the Nuclear Regulatory Authority (ARN) initiated a program to define and implement a Safety Performance Indicators System for the two operating nuclear power plants, Atucha I and Embalse. The objective of the program was to incorporate a set of safety performance indicators to be used as a new regulatory tool providing an additional view of the operational performance of the nuclear power plants, improving the ability to detect degradation on safety related areas. A set of twenty-four safety performance indicators was developed and improved throughout pilot implementation initiated in July 1998. This paper summarises the program development, the main criteria applied in each stage and the results obtained. (author)

  8. Indicators for environmental sustainability

    DEFF Research Database (Denmark)

    Dong, Yan; Hauschild, Michael Zwicky

    2017-01-01

    Decision making on sustainable consumption and production requires scientifically based information on sustainability. Different environmental sustainability targets exist for specific decision problems. To observe how well these targets are met, relevant environmental indicators are needed...

  9. NOHSS Child Indicators

    Data.gov (United States)

    U.S. Department of Health & Human Services — Data for School year-end 1994 through year-end 2016. State oral health surveys are the data sources for these indicators. States periodically conduct independent...

  10. NOHSS Child Indicators

    Data.gov (United States)

    U.S. Department of Health & Human Services — Data for School year-end 1994 through year-end 2017. State oral health surveys are the data sources for these indicators. States periodically conduct independent...

  11. Fishery Performance Indicators

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Performance indicators for landings, effort, revenue and distribution of revenue are collected for various fisheries nation-wide. The fisheries include catch and...

  12. NOHSS Adult Indicators

    Data.gov (United States)

    U.S. Department of Health & Human Services — 2012-2014 (even years). Data from BRFSS for indicators of adult oral health for even years from 2012 through 2014. National estimates are represented by the median...

  13. Indicators: Sediment Enzymes

    Science.gov (United States)

    Sediment enzymes are proteins that are produced by microorganisms living in the sediment or soil. They are indicators of key ecosystem processes and can help determine which nutrients are affecting the biological community of a waterbody.

  14. Solar Indices - Sunspot Numbers

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  15. Science and Technical Indicators

    Czech Academy of Sciences Publication Activity Database

    Laiblová Kadlecová, Ivana; Lhoták, Martin; Mika, Pavel

    -, č. 3 (2014) E-ISSN 1805-2800 Keywords : bibliometrics Subject RIV: AF - Documentation, Lib rarianship, Information Studies http://www. lib .cas.cz/casopis-informace/science-and-technical-indicators/

  16. Environmental indicators for buildings

    DEFF Research Database (Denmark)

    Dammann, Sven

    2004-01-01

    Environmental Indicators for Buildings are studied using two different perspectives: with a technological, environmental scientific departing point and with a social scientific departing point. Different relevant groups in the building sector are identified and analysed, using the Social...

  17. Environmental indicators for buildings

    DEFF Research Database (Denmark)

    Dammann, Sven

    Environmental Indicators for Buildings are studied using two different perspectives: with a technological, environmental scientific departing point and with a social scientific departing point. Different relevant groups in the building sector are identified and analysed, using the Social...

  18. Indicators and SEA

    DEFF Research Database (Denmark)

    Gao, Jingjing; Kørnøv, Lone; Christensen, Per

    Abstract: Indicators are widely used in SEA to measure, communicate and monitor impacts from a proposed policy, plan or programme, and can improve the effectiveness for the SEA by simplifying the complexity of both assessment and presentation. Indicators can be seen as part of the implementation...... process helping to understand, communicate and, integrate important environmental issues in planning and decision-making. On the other hand, use of indicators can also limit SEA effectiveness, if the ones chosen are biased or limited, if the aggregation gives incorrect interpretation...... and if the information requirement for different target groups is not addressed. Indicators are widely used in SEA to measure, communicate and monitor impacts from a proposed policy, plan or programme, and can improve the effectiveness for the SEA by simplifying the complexity of both assessment and presentation...

  19. Indicators of Training Readiness

    National Research Council Canada - National Science Library

    Orlansky, Jesse

    1997-01-01

    ... officials in the Department of Defense. Although SORTS includes some subjective and potentially unreliable information, indicators of the amounts of training conducted, such as number of flying hours and steaming days, are robust...

  20. Indicators: Benthic Macroinvertebrates

    Science.gov (United States)

    Benthic (meaning “bottom-dwelling”) macroinvertebrates are small aquatic animals and the aquatic larval stages of insects. Benthic macroinvertebrates are commonly used as indicators of the biological condition of waterbodies.

  1. Solar Indices Bulletin

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Solar Indices Bulletin is a prompt monthly information product that is distributed within two weeks after the observation month closes. For the month just ended,...

  2. Solar Indices - Solar Irradiance

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  3. Solar Indices - Solar Ultraviolet

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  4. Solar Indices - Plage Regions

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  5. Solar Indices - Solar Corona

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  6. Solar Indices - Solar Flares

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Collection includes a variety of indices related to solar activity contributed by a number of national and private solar observatories located worldwide. This...

  7. Índíces de conforto térmico e concentração de gases em galpões avícolas no semiárido Paraibano Indices of thermal comfort and gases concentration in broilers houses in the semiarid region, Brazil

    Directory of Open Access Journals (Sweden)

    Dermeval A. Furtado

    2010-12-01

    , during the day, which is 24º C. None of the chicken broilers showed concentrations of gases that offer an unhealthy ambient to the birds and to the workers. Although the Twater and the index of thermal comfort are elevate during the hottest days, the production indices were within the established for the Brazilian poultry industry.

  8. Ouellette Thermal Test Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Thermal Test Facility is a joint Army/Navy state-of-the-art facility (8,100 ft2) that was designed to:Evaluate and characterize the effect of flame and thermal...

  9. Solar Thermal Energy Technology

    Energy Technology Data Exchange (ETDEWEB)

    Cason, D.L.; Pitsenbarger, J. [eds.

    1996-02-01

    Solar Thermal Energy Technology (PST) announces on a bimonthly basis the current worldwide research and development information that would expand the technology base required for the advancement of solar thermal systems as a significant energy resource.

  10. Financial Soundness Indicators

    OpenAIRE

    Daniela Zapodeanu; Mihail-Ioan Cociuba

    2010-01-01

    Following the financial-economic crisis the financial systems worldwide have been subjected to enormous pressure, which called into question the need for financial system stability in general and in particular the one of the banking system. We overview the most important indicators in financial stability and we analyze the evolution of the main indicators of financial health for the Romanian banking system as a whole and for two banks, respectively BRD and Transylvania Bank . We find that ban...

  11. Monetary Conditions Indicators

    OpenAIRE

    Martin Èihák; Tomáš Holub

    2000-01-01

    Monetary Conditions IndicatorsMartin CIHAK ? International Monetary Fund, Washington, D.C.Tomas HOLUB ? Czech National Bank; Faculty of Social Sciences, Charles University, PragueThe article provides an overview of foreign-language (non-Czech) literature on monetary conditions indices. The authors also discuss the issues involved in the construction of a monetary conditions index for the Czech Republic. They argue that if a monetary conditions index is to have any use for practical monetary p...

  12. Summarizing multiple deprivation indicators

    OpenAIRE

    Cappellari, Lorenzo; Jenkins, Stephen P.

    2006-01-01

    Deprivation scales derived from multiple, typically dichotomous, indicators, are widely used to monitor households’ standards of living, and to complement measures of living standards based on income. We use an item response modelling (IRM) framework to address several issues concerning the derivation of deprivation scales in general and the use of sum-score deprivation indices in particular. Although we favour the IRM approach over the sum-score one in principle, we find in an illustrative...

  13. Thermal Remote Anemometer Device

    Science.gov (United States)

    Heyman, Joseph S.; Heath, D. Michele; Winfree, William P.; Miller, William E.; Welch, Christopher S.

    1988-01-01

    Thermal Remote Anemometer Device developed for remote, noncontacting, passive measurement of thermal properties of sample. Model heated locally by scanning laser beam and cooled by wind in tunnel. Thermal image of model analyzed to deduce pattern of airflow around model. For materials applications, system used for evaluation of thin films and determination of thermal diffusivity and adhesive-layer contact. For medical applications, measures perfusion through skin to characterize blood flow and used to determine viabilities of grafts and to characterize tissues.

  14. Air quality indicators

    International Nuclear Information System (INIS)

    Clench-Aas, Jocelyn; Guerreiro, Cristina; Bartonova, Alena

    1999-06-01

    This report proposes and describes in detail several air quality indicators that may be used to describe population exposure. The suggested indicators account for temporal and spatial patterns of pollution and movements of individuals between different micro-environments. The Air Quality Indicator /AQI) should represent both the spatial and temporal aspects of pollution exposure that may have important effects on health. Two indicators are needed, the Population Air Quality Indicator and the Individual Air Quality Indicator. Mean concentrations, 98th percentile and maximum values are the traditional indicators for estimating exposure. the temporal variability of PM-10 and NO 2 , however, is here described by means of: 1) The rate of change of pollution as the difference between two consecutive hourly values and of 2) episodes, described in terms of number, duration and winter episode period, maximum concentration in the episode and integrated episode exposure (episode AOT50/100). The spatial variation of AQIs can be described in several ways, e.g.: 1) Concentrations in neighbouring grid squares can be compared as an indication of spatial variation and 2) point estimates can be compared to grid values for a description of variation within a grid. Both methods are presented here. A test of the representativity of static point estimates for pollution exposure is to compare them to an estimate of air pollution exposure accounting for movements between different locations, obtained using diaries. The ultimate aim of AQIs is to describe the population exposure to ambient pollution. This is done by estimating the number of people exposed using different characteristics of AQIs. The data used to describe these indicators originates from dispersion modelling of short-term air pollution concentrations in Oslo. Two series of data are used. One represents hour-for hour concentrations in the 1 km 2 grid system covering the city of Oslo, winter 1994/95, calculated by the grid

  15. Electric Motor Thermal Management

    Energy Technology Data Exchange (ETDEWEB)

    Bennion, Kevin S [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-01

    Thermal management enables more efficient and cost-effective motors. This Annual Merit Review presentation describes the technical accomplishments and progress in electric motor thermal management R&D over the last year. This project supports a broad industry demand for data, analysis methods, and experimental techniques to improve and better understand motor thermal management.

  16. Thermal conductivity probe

    Science.gov (United States)

    Navickas, J.

    1969-01-01

    Low-mass probe accurately measures the thermal conductivity of polyurethane foam /and other thermal insulating materials/ while exposed to either hydrogen of helium permeation in temperature ranges from ambient to cryogenic. The thermal conductivity of a specimen is determined from an experimentally determined increase in temperature.

  17. Prevalence and temporal distribution of Schistosoma haematobium ...

    African Journals Online (AJOL)

    Jane

    2010-10-18

    Oct 18, 2010 ... (2003 and 2004). Occurrence of S. haematobium among hospital patients, university students and primary school children. The analysis of the urine samples collected from the hospitals indicated even higher prevalence of schisto- somiasis among out-patients visiting the hospitals for urinary tract infections.

  18. TABLE PREVALENCE OF GIT NEMATODES IN CATTLE

    African Journals Online (AJOL)

    User

    A study was carried out on the prevalence of gastrointestinal (GI) nematodes infection in naturally infected cattle in Ogbomoso area of Oyo State using standard parasitological techniques. The results indicated that out of the 1000 cattle examined, 30(3%) were infected and parasites identified were Haemonchus contortus.

  19. Minimum risk trigger indices

    International Nuclear Information System (INIS)

    Tingey, F.H.

    1979-01-01

    A viable safeguards system includes among other things the development and use of indices which trigger various courses of action. The usual limit of error calculation provides such an index. The classical approach is one of constructing tests which, under certain assumptions, make the likelihood of a false alarm small. Of concern also is the test's failure to indicate a loss (diversion) when in fact one has occurred. Since false alarms are usually costly and losses both costly and of extreme strategic sinificance, there remains the task of balancing the probability of false alarm and its consequences against the probability of undetected loss and its consequences. The application of other than classical hypothesis testing procedures are considered in this paper. Using various consequence models, trigger indices are derived which have certain optimum properties. Application of the techniques would enhance the material control function

  20. Myopia: Prevalence and Progression

    Science.gov (United States)

    1989-01-01

    D~ L LL Myopia Prevalence and Progression DTIC ELECTE ! SEP 19 1989 C _ _ ’ l A 9 ,3 /5i MYOPIA: PREVALENCE AND PROGRESSION Working Group on Myopia... WALLMAN , Department of Biology, City University of New York AC"esiOf) For NTtSCF& DTjC T;,jE 0 ey ____ (:3 1U: or iii COMMITTEE ON VISION ANTHONY J. ADAMS...provided by Carol Metcalf and Gora P. Lerma, for which the working group is grateful. Christine L . McShane, editor of the Commission on Behavioral and

  1. The logarithmic hypervolume indicator

    DEFF Research Database (Denmark)

    Friedrich, Tobias; Bringmann, Karl; Voß, Thomas

    2011-01-01

    It was recently proven that sets of points maximizing the hypervolume indicator do not give a good multiplicative approximation of the Pareto front. We introduce a new “logarithmic hypervolume indicator” and prove that it achieves a close-to-optimal multiplicative approximation ratio. This is exp......It was recently proven that sets of points maximizing the hypervolume indicator do not give a good multiplicative approximation of the Pareto front. We introduce a new “logarithmic hypervolume indicator” and prove that it achieves a close-to-optimal multiplicative approximation ratio...

  2. Terminologie des indices boursiers

    OpenAIRE

    Van der Yeught, Michel

    2013-01-01

    Les indices boursiers sont omniprésents en anglais financier. Les plus importants sont universellement familiers mais leur nature et leur fonctionnement restent largement méconnus. Des distinctions (average/index, narrow index/broad index, price-weighted/market value-weighted, all share/ composite/ subindex) permettront à l’angliciste de spécialité d’adapter à chaque indice la terminologie française ou anglaise qui lui correspond. Des remarques sur des erreurs courantes, un mini-glossaire, un...

  3. Key health indicators database.

    Science.gov (United States)

    Menic, J L

    1990-01-01

    A new database developed by the Canadian Centre for Health Information (CCHI) contains 40 key health indicators and lets users select a range of disaggregations, categories and variables. The database can be accessed through CANSIM, Statistics Canada's electronic database and retrieval system, or through a package for personal computers. This package includes the database on diskettes, as well as software for retrieving and manipulating data and for producing graphics. A data dictionary, a user's guide and tables and graphs that highlight aspects of each indicator are also included.

  4. Temperature indicating device

    International Nuclear Information System (INIS)

    Angus, J.P.; Salt, D.

    1988-01-01

    A temperature indicating device comprises a plurality of planar elements some undergoing a reversible change in appearance at a given temperature the remainder undergoing an irreversible change in appearance at a given temperature. The device is useful in indicating the temperature which an object has achieved as well as its actual temperature. The reversible change is produced by liquid crystal devices. The irreversible change is produced by an absorbent surface carrying substances e.g. waxes which melt at predetermined temperatures and are absorbed by the surface; alternatively paints may be used. The device is used for monitoring processes of encapsulation of radio active waste. (author)

  5. Thermal human biometeorological conditions and subjective thermal sensation in pedestrian streets in Chengdu, China

    Science.gov (United States)

    Zeng, YuLang; Dong, Liang

    2015-01-01

    The outdoor thermal environment of a public space is highly relevant to the thermal perception of individuals, thereby affecting the use of space. This study aims to connect thermal human biometeorological conditions and subjective thermal sensation in hot and humid regions and to find its influence on street use. We performed a thermal comfort survey at three locations in a pedestrian precinct of Chengdu, China. Meteorological measurements and questionnaire surveys were used to assess the thermal sensation of respondents. The number of people visiting the streets was counted. Meanwhile, mean radiant temperature ( T mrt) and the physiological equivalent temperature (PET) index were used to evaluate the thermal environment. Analytical results reveal that weather and street design drive the trend of diurnal micrometeorological conditions of the street. With the same geometry and orientation, a street with no trees had wider ranges of meteorological parameters and a longer period of discomfort. The neutral temperature in Chengdu (24.4 °C PET) is similar to that in Taiwan, demonstrating substantial human tolerance to hot conditions in hot and humid regions. Visitors' thermal sensation votes showed the strongest positive relationships with air temperature. Overall comfort level was strongly related to every corresponding meteorological parameter, indicating the complexity of people's comfort in outdoor environments. In major alleys with multiple functions, the number of people in the street decreased as thermal indices increased; T mrt and PET had significant negative correlations with the number of people. This study aids in understanding pedestrian street use in hot and humid regions.

  6. Solar thermal barometer

    International Nuclear Information System (INIS)

    Anon.

    2004-01-01

    After the bad year of 2002, the european solar thermal market returned to double-digit growth rate in 2003: 22%. Nevertheless, the sector still has not recovered the growth rate it had in the early 2000 and European Commission targets are still far from being reached. This paper presents the thermal solar industry barometer. Data on the evolution of annually installed surfaces in the european union since 1993, the cumulated capacity of thermal collectors installed in the European Union, the estimation of the annual energy production associated to european solar thermal capacities and the main companies of the European Union thermal solar sector are presented and discussed. (A.L.B.)

  7. Prevalence and growth of Listeria monocytogenes in naturally contaminated seafood

    DEFF Research Database (Denmark)

    Jørgensen, Lasse Vigel; Huss, Hans Henrik

    1998-01-01

    Listeria monocytogenes contamination of seafood varies with product category. The highest prevalence was found in cold- smoked fish (34-60%), while the lowest was found in heat- treated and cured seafood (4-12%). The prevalence of L. monocytogenes differed greatly in cold-smoked salmon between...... production sites, ranging from repeated sampling. The results indicate that it is possible to produce cold-smoked salmon with a low prevalence of L. monocytogenes. The organism showed moderate growth...

  8. A novel technique to monitor thermal discharges using thermal infrared imaging.

    Science.gov (United States)

    Muthulakshmi, A L; Natesan, Usha; Ferrer, Vincent A; Deepthi, K; Venugopalan, V P; Narasimhan, S V

    2013-09-01

    Coastal temperature is an important indicator of water quality, particularly in regions where delicate ecosystems sensitive to water temperature are present. Remote sensing methods are highly reliable for assessing the thermal dispersion. The plume dispersion from the thermal outfall of the nuclear power plant at Kalpakkam, on the southeast coast of India, was investigated from March to December 2011 using thermal infrared images along with field measurements. The absolute temperature as provided by the thermal infrared (TIR) images is used in the Arc GIS environment for generating a spatial pattern of the plume movement. Good correlation of the temperature measured by the TIR camera with the field data (r(2) = 0.89) make it a reliable method for the thermal monitoring of the power plant effluents. The study portrays that the remote sensing technique provides an effective means of monitoring the thermal distribution pattern in coastal waters.

  9. Thermal Management and Thermal Protection Systems

    Science.gov (United States)

    Hasnain, Aqib

    2016-01-01

    During my internship in the Thermal Design Branch (ES3), I contributed to two main projects: i) novel passive thermal management system for future human exploration, ii) AVCOAT undercut thermal analysis. i) As NASA prepares to further expand human and robotic presence in space, it is well known that spacecraft architectures will be challenged with unprecedented thermal environments. Future exploration activities will have the need of thermal management systems that can provide higher reliability, mass and power reduction and increased performance. In an effort to start addressing the current technical gaps the NASA Johnson Space Center Passive Thermal Discipline has engaged in technology development activities. One of these activities was done through an in-house Passive Thermal Management System (PTMS) design for a lunar lander. The proposed PTMS, functional in both microgravity and gravity environments, consists of three main components: a heat spreader, a novel hybrid wick Variable Conductance Heat Pipe (VCHP), and a radiator. The aim of this PTMS is to keep electronics on a vehicle within their temperature limits (0 and 50 C for the current design) during all mission phases including multiple lunar day/night cycles. The VCHP was tested to verify its thermal performance. I created a thermal math model using Thermal Desktop (TD) and analyzed it to predict the PTMS performance. After testing, the test data provided a means to correlate the thermal math model. This correlation took into account conduction and convection heat transfer, representing the actual benchtop test. Since this PTMS is proposed for space missions, a vacuum test will be taking place to provide confidence that the system is functional in space environments. Therefore, the model was modified to include a vacuum chamber with a liquid nitrogen shroud while taking into account conduction and radiation heat transfer. Infrared Lamps were modelled and introduced into the model to simulate the sun

  10. Thermal neutron moderating device

    International Nuclear Information System (INIS)

    Takigami, Hiroyuki.

    1995-01-01

    In a thermal neutron moderating device, superconductive coils for generating magnetic fields capable of applying magnetic fields vertical to the longitudinal direction of a thermal neutron passing tube, and superconductive coils for magnetic field gradient for causing magnetic field gradient in the longitudinal direction of the thermal neutron passing tube are disposed being stacked at the outside of the thermal neutron passing tube. When magnetic field gradient is present vertically to the direction of a magnetic moment, thermal neutrons undergo forces in the direction of the magnetic field gradient in proportion to the magnetic moment. Then, the magnetic moment of the thermal neutrons is aligned with the direction vertical to the passing direction of the thermal neutrons, to cause the magnetic field gradient in the passing direction of the thermal neutrons. The speed of the thermal neutrons can be optionally selected and the wavelength can freely be changed by applying forces to the thermal neutrons and changing the extent and direction of the magnetic field gradient. Superconductive coils are used as the coils for generating magnetic fields and the magnetic field gradient in order to change extremely high energy of the thermal neutrons. (N.H.)

  11. Maslov indices and monodromy

    International Nuclear Information System (INIS)

    Dullin, H R; Robbins, J M; Waalkens, H; Creagh, S C; Tanner, G

    2005-01-01

    We prove that for a Hamiltonian system on a cotangent bundle that is Liouville-integrable and has monodromy the vector of Maslov indices is an eigenvector of the monodromy matrix with eigenvalue 1. As a corollary, the resulting restrictions on the monodromy matrix are derived. (letter to the editor)

  12. Lichen indicator [Section 4

    Science.gov (United States)

    Paul L. Patterson; Susan Will-Wolf; Marie T. Trest

    2009-01-01

    Lichens are very responsive to environmental stressors in forests, including changes in forest structure, air quality, and climate. Each lichen species on a plot is an indicator of how lichen communities respond to ecological conditions. Individual lichen species occur erratically and even common species are often absent from plots with suitable habitat. The combined...

  13. Science & Engineering Indicators--1989.

    Science.gov (United States)

    National Science Foundation, Washington, DC. National Science Board.

    This volume is the ninth in the biennial "Science Indicators" series initiated by the National Science Board. The series provides a broad base of quantitative information about the structure and function of United States science and technology and comparisons with other advanced industrial countries. An overview of science and technology…

  14. Publication point indicators

    DEFF Research Database (Denmark)

    Elleby, Anita; Ingwersen, Peter

    2010-01-01

    with novel publication point indicators (PPIs) that are formalized and exemplified. Two diachronic citation windows are applied: 2006-07 and 2006-08. Web of Science (WoS) as well as Google Scholar (GS) are applied to observe the cite delay and citedness for the different document types published by DIIS...

  15. Models and Indicators.

    Science.gov (United States)

    Land, Kenneth C.

    2001-01-01

    Examines the definition, construction, and interpretation of social indicators. Shows how standard classes of formalisms used to construct models in contemporary sociology are derived from the general theory of models. Reviews recent model building and evaluation related to active life expectancy among the elderly, fertility rates, and indicators…

  16. [Indications for retrosternal esophagocoloplasty].

    Science.gov (United States)

    Králík, J; Tomsů, M; Král, V

    1989-04-01

    The authors define, based on experience with 55 retrosternal oesophagocoloplasties, the indications for this operation. They divide the indications into three groups and describe them as 1. the most suitable operation, 2. as the only possible replacement of the oesophagus, 3. as a palliative operation in an otherwise insolvable disphagia due to an inoperable tumour. They emphasize the wide range of indications for the operation which can be implemented without influencing the basic disease of the oesophagus and which makes it possible to apply combined treatment. The operation, though pretentious and time consuming, has the advantage of an extrathoracic approach. As to technical aspects, the authors emphasize the importance to select a portion of the gut with an adequate blood supply. This demand is usually met by the transverse colon on a vascular pedicle of the vasa colica sin.; they also mention the conditions of safe deposition of the gut in the retrosternal tunnel. The paper is supplemented by several case-histories of particularly interesting and difficult situations. If the indication range of the operation and its technical principles are respected and the surgeon is experienced, the failures of the operation are proportional to the severity of the basic disease.

  17. Grassroots indicators for desertification

    International Development Research Centre (IDRC) Digital Library (Canada)

    Reports based on remote sensing data and agricultural forecasts had claimed that there was no famine in the North. But the people at the grassroots, using their own indicators and knowledge of the environment and food resources in their region, had denied this report. Indeed, remote sensing data had failed to take note of ...

  18. Quantum Thermal Transistor.

    Science.gov (United States)

    Joulain, Karl; Drevillon, Jérémie; Ezzahri, Younès; Ordonez-Miranda, Jose

    2016-05-20

    We demonstrate that a thermal transistor can be made up with a quantum system of three interacting subsystems, coupled to a thermal reservoir each. This thermal transistor is analogous to an electronic bipolar one with the ability to control the thermal currents at the collector and at the emitter with the imposed thermal current at the base. This is achieved by determining the heat fluxes by means of the strong-coupling formalism. For the case of three interacting spins, in which one of them is coupled to the other two, that are not directly coupled, it is shown that high amplification can be obtained in a wide range of energy parameters and temperatures. The proposed quantum transistor could, in principle, be used to develop devices such as a thermal modulator and a thermal amplifier in nanosystems.

  19. Malaria prevalence in endemic districts of Bangladesh.

    Directory of Open Access Journals (Sweden)

    Ubydul Haque

    Full Text Available BACKGROUND: Following the 1971 ban of DDT in Bangladesh, malaria cases have increased steadily. Malaria persists as a major health problem in the thirteen south-eastern and north-eastern districts of Bangladesh. At present the national malaria control program, largely supported by the Global Fund for AIDS, Tuberculosis and Malaria (GFATM, provides interventions including advocacy at community level, Insecticide Treated Net (ITN distribution, introduction of Rapid Diagnostic Tests (RDT and combination therapy with Coartem. It is imperative, therefore, that baseline data on malaria prevalence and other malaria indicators are collected to assess the effectiveness of the interventions and rationalize the prevention and control efforts. The objective of this study was to obtain this baseline on the prevalence of malaria and bed net use in the thirteen malaria endemic districts of Bangladesh. METHODS AND PRINCIPAL FINDINGS: In 2007, BRAC and ICDDR,B carried out a malaria prevalence survey in thirteen malaria endemic districts of Bangladesh. A multi-stage cluster sampling technique was used and 9750 blood samples were collected. Rapid Diagnostic Tests (RDT were used for the diagnosis of malaria. The weighted average malaria prevalence in the thirteen endemic districts was 3.97%. In five south-eastern districts weighted average malaria prevalence rate was 6.00% and in the eight north-eastern districts weighted average malaria prevalence rate was (0.40%. The highest malaria prevalence was observed in Khagrachari district. The majority of the cases (90.18% were P. falciparum infections. Malaria morbidity rates in five south-eastern districts was 2.94%. In eight north-eastern districts, morbidity was 0.07%. CONCLUSION AND SIGNIFICANCE: Bangladesh has hypoendemic malaria with P. falciparum the dominant parasite species. The malaria situation in the five north-eastern districts of Bangladesh in particular warrants urgent attention. Detailed maps of the

  20. prevalence and risk

    African Journals Online (AJOL)

    owner

    2012-12-26

    Dec 26, 2012 ... increase the frequency of occurrence of hypoglycaemia. Hypoglycaemia is a ... not only in increased frequency of falciparum malaria, but also .... of illness before presentation. Table 3: Prevalence of hypoglycaemia according to time of last meal. Table 4, shows the higher the parasite density the greater.

  1. Prevalence. Ascice. faotic dogs.

    African Journals Online (AJOL)

    BSN

    reproduction. body weight evaluation and other existing ph}siological and pathological condn1ons. REFERE:\\CES. Datong. P. G. (2003). Seasonal Prevalence of Ascites in Dogs. '\\atonal Diploma project in. Animal I lealth and production Technology. FCAHPT. I'\\\\ RI. Vom .. Plateau State Pp 1-. 28. Gourley. I. M., and Vasseur ...

  2. Prevalence of Esophageal Adenocarcinoma

    African Journals Online (AJOL)

    multiruka1

    esophagus. It is not known whether the trend is similar locally. Objective: To describe the prevalence and clinicopathological characteristics of adenocarcinoma of .... which is in keeping with trends observed in other regions of the world. Most of the patients present late with severe degrees of dysphagia, with wasting seen in.

  3. Perspectives for solar thermal applications in Taiwan

    International Nuclear Information System (INIS)

    Chang, Keh-Chin; Lin, Wei-Min; Leu, Tzong-Shyng; Chung, Kung-Ming

    2016-01-01

    Taiwan has long depended on imported fossil energy. The government is thus actively promoting the use of renewable energy. Since 2000, domestic installations of solar water heaters have increased substantially because of the long-term subsidies provided for such systems. However, data on the annual installation area of solar collectors in recent years indicated that the solar thermal industry in Taiwan has reached a bottleneck. The long-term policy providing subsidies must thus be revised. It is proposed that future thermal applications in Taiwan should focus on building-integrated solar thermal, photovoltaic/thermal, and industrial heating processes. Regarding building-integrated solar thermal systems, the current subsidy model can be continued (according to area of solar collectors); nevertheless, the application of photovoltaic/thermal and industrial heating systems must be determined according to the thermal output of such systems. - Highlights: •The long-term subsidization for solar water heaters has lost effectiveness. •Solar thermal applications include BIST, PV/T and industrial heating process. •A performance-based subsidy policy should be implemented.

  4. Lichens as bio indicators

    International Nuclear Information System (INIS)

    2003-01-01

    This publication discusses the use of lichens as biological indicators. Perennial growth, long life, efficient take-up of mineral nutrients from air and rain and small loss of nutrition are properties that make lichens suitable as biological indicators. In surveys and monitoring, species diversity and coverage by organisms that live as epiphytes on tree trunks have been the most commonly used parameters. A decline in the occurrence of this type of lichen is often related to the content of sulphur compounds in the air and it has been demonstrated that many species are sensitive to sulphur dioxide. It is also known that the growth of many types of lichens increases with a moderate increase in available nitrogen. In South Norway, pollution sensitive species such as Bryoria spp. have advanced strongly, which is probably due to less sulphur in the rain and a higher content of nutrition in the form of nitrate and ammonium

  5. LEADING WITH LEADING INDICATORS

    International Nuclear Information System (INIS)

    PREVETTE, S.S.

    2005-01-01

    This paper documents Fluor Hanford's use of Leading Indicators, management leadership, and statistical methodology in order to improve safe performance of work. By applying these methods, Fluor Hanford achieved a significant reduction in injury rates in 2003 and 2004, and the improvement continues today. The integration of data, leadership, and teamwork pays off with improved safety performance and credibility with the customer. The use of Statistical Process Control, Pareto Charts, and Systems Thinking and their effect on management decisions and employee involvement are discussed. Included are practical examples of choosing leading indicators. A statistically based color coded dashboard presentation system methodology is provided. These tools, management theories and methods, coupled with involved leadership and employee efforts, directly led to significant improvements in worker safety and health, and environmental protection and restoration at one of the nation's largest nuclear cleanup sites

  6. 15. Basic economic indicators

    International Nuclear Information System (INIS)

    Carless, J.; Dow, B.; Farivari, R.; O'Connor, J.; Fox, T.; Tunstall, D.; Mentzingen, M.

    1992-01-01

    The clear value of economic data and analysis to decisionmakers has motivated them to mandate the creation of extensive global economic data sets. This chapter contains a set of these basic economic data, which provides the context for understanding the causes and the consequences of many of the decisions that affect the world's resources. Many traditional economic indicators fail to account for the depletion or deterioration of natural resources, the long-term consequences of such depletion, the equitable distribution of income within a country, or the sustainability of current economic practices. The type of measurement shown here, however, is still useful in showing the great differences between the wealthiest and the poorest countries. Tables are given on the following: Gross national product and official development assistance 1969-89; External debt indicators 1979-89; Central government expenditures; and World commodity indexes and prices 1975-89

  7. Prevalence of modifiable cardiovascular risk factors among tea garden and general population in Dibrugarh, Assam, India

    Directory of Open Access Journals (Sweden)

    Tulika G. Mahanta

    2013-09-01

    Conclusion: High prevalence of modifiable risk factors like tobacco consumption, high salt intake and high prevalence of hypertension indicates the need for early implementation of preventive actions in this population.

  8. The prevalence of exercise-induced asthma among school children ...

    African Journals Online (AJOL)

    Exercise-induced asthma (EIA) is one of the major factors that affect optimal performance in sport. The prevalence of EIA is reported to be on the increase among school children worldwide. The aim of this study was to indicate EIA prevalence among primary-school children in South Africa. A field study determined the ...

  9. Stress analysis in multilayered FGM plates under thermal shock

    Energy Technology Data Exchange (ETDEWEB)

    Jin, G.; Nishikawa, T.; Honda, S.; Awaji, H. [Dept. of Material Science and Engineering, Nagoya Inst. of Tech. (Japan)

    2003-07-01

    In this study, one-dimensional calculation was employed to evaluate the steady-state and transient temperature/stress distributions in a multilayered functionally graded ceramic-metal composite materials. The residual thermal stress raised from fabrication process because of the macroscopic variation of constituent across the thickness was also evaluated. The alumina/nickel FGM disks were fabricated using a powder stacking method and a pulse electric current sintering technique. The thermal shock tests on the fabricated FGM disks were performed and the stress distributions in the FGM plates under thermal shock were calculated using a critical temperature difference where cracks appeared on the ceramic surface. Then the thermal shock properties of FGM plates were evaluated under the consideration of both the thermal stress and the residual thermal stress distribution. It was indicated that the thermal shock properties of the multilayered alumina-nickel FGM plate were strongly influenced by the residual thermal stress distribution on the alumina surface. (orig.)

  10. Prevalence of Autism Spectrum Disorders: data review

    Directory of Open Access Journals (Sweden)

    Francisco ALCANTUD MARÍN

    2017-10-01

    Full Text Available Published data on the prevalence of autism spectrum disorders point to a significant increase in this indicator. This increase is being studied in numerous publications of analysis, meta-analysis and systematic reviews. The prevalence indicates the proportion of people who suffer at a given time or are diagnosed with a disease. The consequences of the increasing prevalence are relevant from the point of health, social and educational, but especially relevant when as is the case, the cause of the disorder is unknown. It is in this sense that the prevalence study gains importance in order to delimit various circumstances that may give clues to the possible cause or causes that generate disorder. This article reviews studies, summarizes the last data, and reflects on them and possible causes that justify the increased reporting. It looks like these epidemiological indicators can or are influenced by possible methodological flaws behind, which can explain the variations between studies and others. It concludes by stating the need population studies and monitoring that allows us to know the reality of the evolution of these disorders in order to provide reliable information to those responsible for the institutions involved in the detection and treatment of ASD.

  11. Health indicators 1991.

    Science.gov (United States)

    Dawson, N

    1991-01-01

    This is the second edition of a database developed by the Canadian Centre for Health Information (CCHI). It features 49 health indicators, under one cover containing the most recent data available from a variety of national surveys. This information may be used to establish health goals for the population and to offer objective measures of their success. The database can be accessed through CANSIM, Statistics Canada's socio-economic electronic database and retrieval system, or through a personal computer package which enables the user to retrieve and analyze the 1.2 million data points in the system.

  12. Main economics indicators

    International Nuclear Information System (INIS)

    1995-11-01

    This monthly publication, based on the most up-to-date techniques of tabular and graphical presentation, is designed to provide at a glance a picture of the most recent changes in the economies of the OECD countries, and a collection of international statistics on the economic developments which have affected the OECD area in the past few years. The indicators selected cover national accounts, industrial production, business surveys, deliveries, stocks and orders, construction, internal trade, labour, wages, prices, domestic and foreign finance, interest rates, trade and payments. (author)

  13. Catalytic thermal barrier coatings

    Science.gov (United States)

    Kulkarni, Anand A.; Campbell, Christian X.; Subramanian, Ramesh

    2009-06-02

    A catalyst element (30) for high temperature applications such as a gas turbine engine. The catalyst element includes a metal substrate such as a tube (32) having a layer of ceramic thermal barrier coating material (34) disposed on the substrate for thermally insulating the metal substrate from a high temperature fuel/air mixture. The ceramic thermal barrier coating material is formed of a crystal structure populated with base elements but with selected sites of the crystal structure being populated by substitute ions selected to allow the ceramic thermal barrier coating material to catalytically react the fuel-air mixture at a higher rate than would the base compound without the ionic substitutions. Precious metal crystallites may be disposed within the crystal structure to allow the ceramic thermal barrier coating material to catalytically react the fuel-air mixture at a lower light-off temperature than would the ceramic thermal barrier coating material without the precious metal crystallites.

  14. Negative thermal expansion materials

    International Nuclear Information System (INIS)

    Evans, J.S.O.

    1997-01-01

    The recent discovery of negative thermal expansion over an unprecedented temperature range in ZrW 2 O 8 (which contracts continuously on warming from below 2 K to above 1000 K) has stimulated considerable interest in this unusual phenomenon. Negative and low thermal expansion materials have a number of important potential uses in ceramic, optical and electronic applications. We have now found negative thermal expansion in a large new family of materials with the general formula A 2 (MO 4 ) 3 . Chemical substitution dramatically influences the thermal expansion properties of these materials allowing the production of ceramics with negative, positive or zero coefficients of thermal expansion, with the potential to control other important materials properties such as refractive index and dielectric constant. The mechanism of negative thermal expansion and the phase transitions exhibited by this important new class of low-expansion materials will be discussed. (orig.)

  15. Josephson Thermal Memory

    Science.gov (United States)

    Guarcello, Claudio; Solinas, Paolo; Braggio, Alessandro; Di Ventra, Massimiliano; Giazotto, Francesco

    2018-01-01

    We propose a superconducting thermal memory device that exploits the thermal hysteresis in a flux-controlled temperature-biased superconducting quantum-interference device (SQUID). This system reveals a flux-controllable temperature bistability, which can be used to define two well-distinguishable thermal logic states. We discuss a suitable writing-reading procedure for these memory states. The time of the memory writing operation is expected to be on the order of approximately 0.2 ns for a Nb-based SQUID in thermal contact with a phonon bath at 4.2 K. We suggest a noninvasive readout scheme for the memory states based on the measurement of the effective resonance frequency of a tank circuit inductively coupled to the SQUID. The proposed device paves the way for a practical implementation of thermal logic and computation. The advantage of this proposal is that it represents also an example of harvesting thermal energy in superconducting circuits.

  16. Tamper indicating packaging

    International Nuclear Information System (INIS)

    Baumann, M.J.; Bartberger, J.C.; Welch, T.D.

    1994-01-01

    Protecting sensitive items from undetected tampering in an unattended environment is crucial to the success of non-proliferation efforts relying on the verification of critical activities. Tamper Indicating Packaging (TIP) technologies are applied to containers, packages, and equipment that require an indication of a tamper attempt. Examples include: the transportation and storage of nuclear material, the operation and shipment of surveillance equipment and monitoring sensors, and the retail storage of medicine and food products. The spectrum of adversarial tampering ranges from attempted concealment of a pin-hole sized penetration to the complete container replacement, which would involve counterfeiting efforts of various degrees. Sandia National Laboratories (SNL) has developed a technology base for advanced TIP materials, sensors, designs, and processes which can be adapted to various future monitoring systems. The purpose of this technology base is to investigate potential new technologies, and to perform basic research of advanced technologies. This paper will describe the theory of TIP technologies and recent investigations of TIP technologies at SNL

  17. Interpretation of thermal infrared data: The heat capacity mapping mission

    Energy Technology Data Exchange (ETDEWEB)

    Price, J.

    1985-01-01

    This book describes the measurement and analysis of global infrared radiation. Topics considered include remote sensing in the thermal infrared, regional-scale estimates of surface moisture availability and thermal inertia using remote thermal measurements, the influenced geography on local environment as inferred from night thermal infrared imagery, surface temperature as an indicator of evapotransipration and soil, association among surface temperatures sensed by satellite and agriculturally related variables, the role of remotely sensed data in studies of the thermal bar, and HCMM satellite data calibration and atmospheric corrections.

  18. Disordered Gambling Prevalence

    DEFF Research Database (Denmark)

    Harrison, Glenn W.; Jessen, Lasse J.; Lau, Morten

    2018-01-01

    of detectable risk with these corrections, since gambling behavior is positively correlated with the decision to participate in gambling surveys. We also find that imposing a threshold gambling history leads to underestimation of the prevalence of gambling problems.......We study Danish adult gambling behavior with an emphasis on discovering patterns relevant to public health forecasting and economic welfare assessment of policy. Methodological innovations include measurement of formative in addition to reflective constructs, estimation of prospective risk...... for developing gambling disorder rather than risk of being falsely negatively diagnosed, analysis with attention to sample weights and correction for sample selection bias, estimation of the impact of trigger questions on prevalence estimates and sample characteristics, and distinguishing between total...

  19. Preparation, characterization, and thermal properties of microencapsulated phase change material for thermal energy storage

    Energy Technology Data Exchange (ETDEWEB)

    Alkan, Cemil; Sari, Ahmet; Karaipekli, Ali [Department of Chemistry, Gaziosmanpasa University, 60240 Tokat (Turkey); Uzun, Orhan [Department of Physics, Gaziosmanpasa University, 60240 Tokat (Turkey)

    2009-01-15

    This study is focused on the preparation, characterization, and determination of thermal properties of microencapsulated docosane with polymethylmethacrylate (PMMA) as phase change material for thermal energy storage. Microencapsulation of docosane has been carried out by emulsion polymerization. The microencapsulated phase change material (MEPCM) was characterized using scanning electron microscopy (SEM) and Fourier transform infrared (FT-IR) spectroscopy. Thermal properties and thermal stability of MEPCM were measured by differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). DSC analysis indicated that the docosane in the microcapsules melts at 41.0 C and crystallizes at 40.6 C. It has latent heats of 54.6 and -48.7 J/g for melting and crystallization, respectively. TGA showed that the MEPCM degraded in three distinguishable steps and had good chemical stability. Accelerated thermal cycling tests also indicated that the MEPCM had good thermal reliability. Based on all these results, it can be concluded that the microencapsulated docosane as MEPCMs have good potential for thermal energy storage purposes such as solar space heating applications. (author)

  20. Solar Thermal Reactor Materials Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Lichty, P. R.; Scott, A. M.; Perkins, C. M.; Bingham, C.; Weimer, A. W.

    2008-03-01

    Current research into hydrogen production through high temperature metal oxide water splitting cycles has created a need for robust high temperature materials. Such cycles are further enhanced by the use of concentrated solar energy as a power source. However, samples subjected to concentrated solar radiation exhibited lifetimes much shorter than expected. Characterization of the power and flux distributions representative of the High Flux Solar Furnace(HFSF) at the National Renewable Energy Laboratory(NREL) were compared to ray trace modeling of the facility. In addition, samples of candidate reactor materials were thermally cycled at the HFSF and tensile failure testing was performed to quantify material degradation. Thermal cycling tests have been completed on super alloy Haynes 214 samples and results indicate that maximum temperature plays a significant role in reduction of strength. The number of cycles was too small to establish long term failure trends for this material due to the high ductility of the material.

  1. Parasites and Morphometric Indices of Frozen Fish Sold in Nsukka ...

    African Journals Online (AJOL)

    The parasites and morphometric indices of frozen fish sold in Nsukka Urban Market in Nsukka Local Government Area of Enugu State, Nigeria were investigated between June and December 2008 to determine the parasite prevalence, mean intensity and abundance and some morphometric indices associated with ...

  2. Theory of thermal stresses

    CERN Document Server

    Boley, Bruno A

    1997-01-01

    Highly regarded text presents detailed discussion of fundamental aspects of theory, background, problems with detailed solutions. Basics of thermoelasticity, heat transfer theory, thermal stress analysis, more. 1985 edition.

  3. Mars Thermal Inertia

    Science.gov (United States)

    2001-01-01

    This image shows the global thermal inertia of the Martian surface as measured by the Thermal Emission Spectrometer (TES) instrument on the Mars Global Surveyor. The data were acquired during the first 5000 orbits of the MGS mapping mission. The pattern of inertia variations observed by TES agrees well with the thermal inertia maps made by the Viking Infrared Thermal Mapper experiment, but the TES data shown here are at significantly higher spatial resolution (15 km versus 60 km).The TES instrument was built by Santa Barbara Remote Sensing and is operated by Philip R. Christensen, of Arizona State University, Tempe, AZ.

  4. Building Thermal Models

    Science.gov (United States)

    Peabody, Hume L.

    2017-01-01

    This presentation is meant to be an overview of the model building process It is based on typical techniques (Monte Carlo Ray Tracing for radiation exchange, Lumped Parameter, Finite Difference for thermal solution) used by the aerospace industry This is not intended to be a "How to Use ThermalDesktop" course. It is intended to be a "How to Build Thermal Models" course and the techniques will be demonstrated using the capabilities of ThermalDesktop (TD). Other codes may or may not have similar capabilities. The General Model Building Process can be broken into four top level steps: 1. Build Model; 2. Check Model; 3. Execute Model; 4. Verify Results.

  5. Space thermal control development

    Science.gov (United States)

    Hoover, M. J.; Grodzka, P. G.; Oneill, M. J.

    1971-01-01

    The results of experimental investigations on a number of various phase change materials (PCMs) and PCMs in combination with metals and other materials are reported. The evaluations include the following PCM system performance characteristics: PCM and PCM/filler thermal diffusivities, the effects of long-term thermal cycling, PCM-container compatibility, and catalyst effectiveness and stability. Three PCMs demonstrated performance acceptable enough to be considered for use in prototype aluminum thermal control devices. These three PCMs are lithium nitrate trihydrate with zinc hydroxy nitrate catalyst, acetamide, and myristic acid. Of the fillers tested, aluminum honeycomb filler was found to offer the most increase in system thermal diffusivity.

  6. Thermal decomposition of pyrite

    International Nuclear Information System (INIS)

    Music, S.; Ristic, M.; Popovic, S.

    1992-01-01

    Thermal decomposition of natural pyrite (cubic, FeS 2 ) has been investigated using X-ray diffraction and 57 Fe Moessbauer spectroscopy. X-ray diffraction analysis of pyrite ore from different sources showed the presence of associated minerals, such as quartz, szomolnokite, stilbite or stellerite, micas and hematite. Hematite, maghemite and pyrrhotite were detected as thermal decomposition products of natural pyrite. The phase composition of the thermal decomposition products depends on the terature, time of heating and starting size of pyrite chrystals. Hematite is the end product of the thermal decomposition of natural pyrite. (author) 24 refs.; 6 figs.; 2 tabs

  7. Thermal conductivity distributed from a Thermal Response Test (TRT in a borehole heat exchanger (BHE

    Directory of Open Access Journals (Sweden)

    A. Blasi

    2012-12-01

    Full Text Available The Thermal Response Test (TRT is the most versatile tool to determine the thermal propriety of the underground for designing and sizing of the borehole heat exchangers (BHE. The TRT permits to get the average thermal conductivity (λ across the whole stratigraphy, the thermal resistance (Rb of the borehole / grout / rocks and the undisturbed temperature of the soil (Tg. The ground temperature is influenced by climate, topographical, geological and hydrological factors. Vertical temperature changes allows to get the relationships with the lithology and especially with the groundwater. Vertical temperature log, acquired during and after the TRT, permits to calculate the distributed thermal conductivity over each stratigraphic interval. This method permits to verify how the different lithologies and the groundwater contribute to the heat exchange in the borehole/ground system, so called geoexchange. The experimental site test indicates that the marls and clayed-marls levels show a higher thermal inertia than the sandstone ones and then lower values of thermal conducivity. The sandstones have a higher thermal conductivity with a rapid cooling and they provide the main contribution to the ground heat exchange. The distributed thermal conductivity is an useful tool for designing the BHE with the best performance, a better economic return and with low environmental impacts.

  8. Prevalence of asthma in college student population

    Directory of Open Access Journals (Sweden)

    Stojanović-Ristić Snežana

    2006-01-01

    Full Text Available Introduction: Bronchial asthma is common chronic disease among young people and prevalence of this condition has been constantly growing over past two decades throughout the world. Objective: To establish the prevalence of asthma in student population of Belgrade University and to determine the frequency distribution in regard to their permanent residence. Method: Data obtained from annual physical examinations of 118 342 students (age 19-23 years treated at the Student’s Health Care Institute between 1996-2001 were analyzed. Affirmative answer to the question: "Are you currently treated", or "Have you ever been treated for asthma" indicated diagnosis of asthma. Data on student’s age, gender, permanent residence, and smoking habits were collected. Results: The prevalence of asthma was 3680/100.000 and mildly growing trend was noted over the last several years (from 2.96% to 4.05% (F=42.427; df=4; p<0.01. Asthma was more prevalent in females (57% than among males (43% (χ2=91.189; df=1; p<0.01. Several regions with increased asthma incidence were identified and the causes of such findings still need to be clarified. Cigarette smoking was common in students (χ2=236.781; df=1; p<0.01, but also among asthmatics [one out of three students was a smoker (χ2=8.141; df=1; p<0.01]. Conclusion: The prevalence of asthma in student population is 3.68% with mildly growing trend over the last years. The disease is more prevalent in females. Cigarette smoking is common in students as well as among asthmatics. To our knowledge, this is the first study on prevalence of asthma in young adult population in our country.

  9. Teriparatide - Indications beyond osteoporosis

    Directory of Open Access Journals (Sweden)

    Marilyn Lee Cheng

    2012-01-01

    Full Text Available Osteoporosis is a condition of impaired bone strength that results in an increased risk of fracture. The current and most popular pharmacological options for the treatment of osteoporosis include antiresorptive therapy, in particular, oral bisphosphonates (alendronate, risedronate, ibandronate. Anabolic agents like teriparatide have widened our therapeutic options. They act by directly stimulating bone formation and improving bone mass quantity and quality. Two forms of recombinant human parathyroid hormone (PTH are available : full-length PTH (PTH 1-84; approved in the EU only and the 1-34 N-terminal active fragment of PTH (teriparatide, US FDA approved. This review aims to discuss the benefits of teriparatide beyond the currently licensed indications like fracture healing, dental stability, osteonecrosis of jaw, hypoparathyroidism, and hypocalcemia.

  10. Environmental indicators for buildings

    DEFF Research Database (Denmark)

    Dammann, S.

    Whenever we shop, the products we consider buying are labelled with the economical price we have to pay if we want to purchase them - an important parameter in our decisions as purchasers. The increrasing awareness for environmental limits and backlashes of human activities also in the building...... sector have fostered the wish to define 'the ecological price' of a building as a help for environmental conscious decision-making. In a social constructivist approach this Ph.D. thesis looks across and beyond the manifold existing approaches for environmental indicators for buildings. It acknowledges...... that among the relevant actors in the building sector the scientific view is only one perspective among others. This study combines natural-scientific knowledge with social-scientific knowledge, obtained in a close co-operation with actors in the building sector in Denmark and a research period...

  11. International energy indicators

    International Nuclear Information System (INIS)

    Rossi, E. Jr.

    1981-12-01

    Data are tabulated and graphically represented on international energy indicators. The following are presented: world crude oil production, 1974 to October 1981; OPEC crude oil productive capacity; world crude oil and refined product inventory levels, 1975 to October, 1981; oil consumption in OECD countries, 1975 to October 1981; USSR crude oil production and exports, 1975 to October, 1981; free world and US nuclear electricity generation, 1973 to December, 1981 and current capacity. Specific US data presented are: US domestic oil supply, 1977 to June, 1981; US gross imports of crude oil and products, 1973 to October, 1981; landed cost of Saudi crude current and 1974 dollars; US coal trade, 1975 to September, 1981; US natural gas trade, 1975 to October, 1981; summary of US merchandise trade, 1977 to October, 1981; and energy/GNP ratio

  12. Prevalence of food allergies in South Asia.

    Science.gov (United States)

    Arakali, Schweta R; Green, Todd D; Dinakar, Chitra

    2017-01-01

    To evaluate the published medical literature on the prevalence and types of food allergies in South Asia. A PubMed search was performed using the keywords India and food allergy, Asia and food allergy, and South Asia and food allergy for any period. Articles cited in selected studies were reviewed for their appropriateness of inclusion into this review. Publications were included that were original research and fit the topic of food allergy and South Asia. South Asia is defined as region inclusive of India, Pakistan, Bangladesh, and Sri Lanka. A total of 169 articles were initially identified, and 47 were reviewed in detail for inclusion in this review. The primary focus was placed on 10 studies that consisted of case reports of newly reported or documented food allergy, survey studies that investigated food allergy prevalence in specific demographics, and prospective and cross-sectional studies with case controls, all of which investigated food allergy prevalence by allergy testing in a selected population. The medical literature on the prevalence and types of food allergy in South Asia indicates that there is a variety of unusual and unique allergens and an overall low incidence of food allergy. There is also an association of increased food allergy prevalence in individuals who live in metropolitan regions or who migrate to communities that have adopted westernization. Copyright © 2016 American College of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

  13. The Thermal Waters of Jordan

    Science.gov (United States)

    Sass, I.; Schäffer, R.

    2012-04-01

    In a recent field campaign all known natural hot spring areas of Jordan were investigated. Their hydrochemical properties including some fundamental isotopes were measured. Jordan's thermal springs can be classified into four thermal provinces (Nahr Al-Urdun, Hammamat Ma'in, Zara and Wadi Araba province), with similar hydrochemical and geologicalsettings. Thermal springs of Hammamat Ma'in and Zara province are situated on prominent faults. Reservoir temperature estimation with the Mg-corrected Na-K-Ca geothermometer indicates temperatures between 61 °C and 82 °C. Even taking into account the increased geothermal gradient at Dead Sea's east coast, the water's origin has to be considered mainly in deeper formations. Carbon dioxide, emitted by tertiary basalts situated close to the springs, may be responsible for gas lift. Mineralisation and δ18O-values indicate, that the spring water's origin is mostly fossil, i.e. not part of the global water cycle. It is shown, that ground water mining led to a shift within δ18O-ratio during the last 30 years due to a reduction of shallow water portion in addition to a dislocation of the catchment area. Ground water mining will impact the thermal spring productivity and quality anyway in the future. Present-day precipitation rates and catchment areas in Dead Sea region are by far not sufficient to explain relative high discharge. For the Hammamat Ma'in Province is documented, that discharge and maximal spring water temperatures are constant during the last 50 years, showing marginal seasonal oscillation and negligible influence by short-term climatic changes. The water characteristics of Hammamat Ma'in and Zara province are related. However, Zara waters feature systematically less ion concentration and lower temperatures due to a stronger influence of vadose water. The springs of Nahr Al-Urdun province are recharged mainly by shallow groundwater. Thus temperature and mineralisation is lower than at the springs at the Dead Sea

  14. Temperature-dependent thermal properties of ex vivo liver undergoing thermal ablation.

    Science.gov (United States)

    Guntur, Sitaramanjaneya Reddy; Lee, Kang Il; Paeng, Dong-Guk; Coleman, Andrew John; Choi, Min Joo

    2013-10-01

    Thermotherapy uses a heat source that raises temperatures in the target tissue, and the temperature rise depends on the thermal properties of the tissue. Little is known about the temperature-dependent thermal properties of tissue, which prevents us from accurately predicting the temperature distribution of the target tissue undergoing thermotherapy. The present study reports the key thermal parameters (specific heat capacity, thermal conductivity and heat diffusivity) measured in ex vivo porcine liver while being heated from 20 ° C to 90 ° C and then naturally cooled down to 20 ° C. The study indicates that as the tissue was heated, all the thermal parameters resulted in plots with asymmetric quasi-parabolic curves with temperature, being convex downward with their minima at the turning temperature of 35-40 ° C. The largest change was observed for thermal conductivity, which decreased by 9.6% from its initial value (at 20 ° C) at the turning temperature (35 ° C) and rose by 45% at 90 ° C from its minimum (at 35 ° C). The minima were 3.567 mJ/(m(3) ∙ K) for specific heat capacity, 0.520 W/(m.K) for thermal conductivity and 0.141 mm(2)/s for thermal diffusivity. The minimum at the turning temperature was unique, and it is suggested that it be taken as a characteristic value of the thermal parameter of the tissue. On the other hand, the thermal parameters were insensitive to temperature and remained almost unchanged when the tissue cooled down, indicating that their variations with temperature were irreversible. The rate of the irreversible rise at 35 ° C was 18% in specific heat capacity, 40% in thermal conductivity and 38.3% in thermal diffusivity. The study indicates that the key thermal parameters of ex vivo porcine liver vary largely with temperature when heated, as described by asymmetric quasi-parabolic curves of the thermal parameters with temperature, and therefore, substantial influence on the temperature distribution of the tissue undergoing

  15. [Monitoring the prevalence of obesity

    DEFF Research Database (Denmark)

    Sørensen, Thorkild I.A.; Due, P.; Hansen, B.

    2008-01-01

    The Danish Fitness and Nutrition Council has proposed a model to monitor the prevalence of overweight and obesity in Denmark. The model should make it possible to assess whether different initiatives reduce the prevalence of obesity and to gain knowledge on how to prevent obesity. The prevalence...

  16. Ergodicity of financial indices

    Science.gov (United States)

    Kolesnikov, A. V.; Rühl, T.

    2010-05-01

    We introduce the concept of the ensemble averaging for financial markets. We address the question of equality of ensemble and time averaging in their sequence and investigate if these averagings are equivalent for large amount of equity indices and branches. We start with the model of Gaussian-distributed returns, equal-weighted stocks in each index and absence of correlations within a single day and show that even this oversimplified model captures already the run of the corresponding index reasonably well due to its self-averaging properties. We introduce the concept of the instant cross-sectional volatility and discuss its relation to the ordinary time-resolved counterpart. The role of the cross-sectional volatility for the description of the corresponding index as well as the role of correlations between the single stocks and the role of non-Gaussianity of stock distributions is briefly discussed. Our model reveals quickly and efficiently some anomalies or bubbles in a particular financial market and gives an estimate of how large these effects can be and how quickly they disappear.

  17. Thermal Analysis of Sintered Silver Nanoparticles Film

    Directory of Open Access Journals (Sweden)

    M. Keikhaie

    2014-07-01

    Full Text Available Thin bonded films have many applications in antireflection and reflection coating, insulating and conducting films and semiconductor industries. Thermal conductivity is one of the most important parameter for power packaging since the thermal resistance of the interconnections is directly related to the heat removal capability and thermal management of the power package. The defects in materials play very important role on the effective thermal conductivity. In this paper, finite element method (FEM was utilized to simulate the effect of pores on the effective thermal conductivity of sintered silver nanoparticles film. The simulation results indicate that the effective thermal conductivity of film is different at different directions and would be enhanced when the pore angle is 90. The simulation results will help us to further understand the heat transfer process across highly porous structures and will provide us a powerful guide to design coating with high thermal insulation or conductor property. Because of there is no similar experimental data for this simulation results, this paper is a comparative work among three different models.

  18. Thermal responses of Symbiodinium photosynthetic carbon assimilation

    Science.gov (United States)

    Oakley, Clinton A.; Schmidt, Gregory W.; Hopkinson, Brian M.

    2014-06-01

    The symbiosis between hermatypic corals and their dinoflagellate endosymbionts, genus Symbiodinium, is based on carbon exchange. This symbiosis is disrupted by thermally induced coral bleaching, a stress response in which the coral host expels its algal symbionts as they become physiologically impaired. The disruption of the dissolved inorganic carbon (DIC) supply or the thermal inactivation of Rubisco have been proposed as sites of initial thermal damage that leads to the bleaching response. Symbiodinium possesses a highly unusual Form II ribulose bisphosphate carboxylase/oxygenase (Rubisco), which exhibits a lower CO2:O2 specificity and may be more thermally unstable than the Form I Rubiscos of other algae and land plants. Components of the CO2 concentrating mechanism (CCM), which supplies inorganic carbon for photosynthesis, may also be temperature sensitive. Here, we examine the ability of four cultured Symbiodinium strains to acquire and fix DIC across a temperature gradient. Surprisingly, the half-saturation constant of photosynthesis with respect to DIC concentration ( K P), an index of CCM function, declined with increasing temperature in three of the four strains, indicating a greater potential for photosynthetic carbon acquisition at elevated temperatures. In the fourth strain, there was no effect of temperature on K P. Finding no evidence for thermal inhibition of the CCM, we conclude that CCM components are not likely to be the primary sites of thermal damage. Reduced photosynthetic quantum yields, a hallmark of thermal bleaching, were observed at low DIC concentrations, leaving open the possibility that reduced inorganic carbon availability is involved in bleaching.

  19. Passive thermal management using phase change materials

    Science.gov (United States)

    Ganatra, Yash Yogesh

    The trend of enhanced functionality and reducing thickness of mobile devices has. led to a rapid increase in power density and a potential thermal bottleneck since. thermal limits of components remain unchanged. Active cooling mechanisms are not. feasible due to size, weight and cost constraints. This work explores the feasibility. of a passive cooling system based on Phase Change Materials (PCMs) for thermal. management of mobile devices. PCMs stabilize temperatures due to the latent heat. of phase change thus increasing the operating time of the device before threshold. temperatures are exceeded. The primary contribution of this work is the identification. of key parameters which influence the design of a PCM based thermal management. system from both the experiments and the numerical models. This work first identifies strategies for integrating PCMs in an electronic device. A. detailed review of past research, including experimental techniques and computational. models, yields key material properties and metrics to evaluate the performance of. PCMs. Subsequently, a miniaturized version of a conventional thermal conductivity. measurement technique is developed to characterize thermal resistance of PCMs. Further, latent heat and transition temperatures are also characterized for a wide. range of PCMs. In-situ measurements with PCMs placed on the processor indicate that some. PCMs can extend the operating time of the device by as much as a factor of 2.48. relative to baseline tests (with no PCMs). This increase in operating time is investigated. by computational thermal models that explore various integration locations, both at the package and device level.

  20. Thermal Characterizations of Exponential Fin Systems

    Directory of Open Access Journals (Sweden)

    A.-R. A. Khaled

    2010-01-01

    Full Text Available Exponential fins are mathematically analyzed in this paper. Two types are considered: (i straight exponential fins and (ii pin exponential fins. The possibility of having increasing or decreasing cross-sectional areas is considered. Different thermal performance indicators are derived. The maximum ratio between the thermal efficiency of the exponential straight fin to that of the rectangular fin is found to be 1.58 at an effective thermal length of 2.0. This ratio is even larger when exponential fins are compared with triangular and parabolic straight fins. Moreover, the maximum ratio between the thermal efficiency of the exponential pin fin to that of the rectangular pin fin is found to be 1.17 at an effective thermal length of 1.5. However, exponential pin fins thermal efficiencies are found to be lower than those of triangular and parabolic pin fins. Moreover, exponential joint-fins may transfer more heat than rectangular joint-fins especially when differences between their senders and receivers portions dimensionless indices are very large. Finally, it is found that increasing the joint-fin exponential index may cause straight exponential joint-fins to transfer more heat than rectangular joint-fins.

  1. Development of Mental Health Indicators in Korea

    Science.gov (United States)

    Han, Hyeree; Ahn, Dong Hyun; Song, Jinhee; Hwang, Tae Yeon

    2012-01-01

    Objective Promoting mental health and preventing mental health problems are important tasks for international organizations and nations. Such goals entail the establishment of active information networks and effective systems and indicators to assess the mental health of populations. This being said, there is a need in Korea develop ways to measure the state of mental health in Korea. Methods This paper reviews the mental health indicator development policies and practices of seven organizations, countries, and regions: WHO, OECD, EU, United States, Australia, UK, and Scotland. Using Delphi method, we conducted two surveys of mental health indicators for experts in the field of mental health. The survey questionnaire included 5 domains: mental health status, mental health factor, mental health system, mental health service, and quality of mental health services. We considered 124 potential mental health indicators out of more than 600 from indicators of international organizations and foreign countries. Results We obtained the top 30 mental health indicators from the surveys. Among them, 10 indicators belong to the mental health system. The most important five mental health indicators are suicide rate, rate of increase in mental disorder treatment, burden caused by mental disorders, adequacy of identifying problems of mental health projects and deriving solutions, and annual prevalence of mental disorders. Conclusion Our study provides information about the process for indicator development and the use of survey results to measure the mental health status of the Korean population. The aim of mental health indicator development is to improve the mental health system by better grasping the current situation. We suggest these mental health indicators can monitor progress in efforts to implement reform policies, provide community services, and involve users, families and other stakeholders in mental health promotion, prevention, care and rehabilitation. PMID:23251193

  2. High Thermal Conductivity Materials

    CERN Document Server

    Shinde, Subhash L

    2006-01-01

    Thermal management has become a ‘hot’ field in recent years due to a need to obtain high performance levels in many devices used in such diverse areas as space science, mainframe and desktop computers, optoelectronics and even Formula One racing cars! Thermal solutions require not just taking care of very high thermal flux, but also ‘hot spots’, where the flux densities can exceed 200 W/cm2. High thermal conductivity materials play an important role in addressing thermal management issues. This volume provides readers a basic understanding of the thermal conduction mechanisms in these materials and discusses how the thermal conductivity may be related to their crystal structures as well as microstructures developed as a result of their processing history. The techniques for accurate measurement of these properties on large as well as small scales have been reviewed. Detailed information on the thermal conductivity of diverse materials including aluminum nitride (AlN), silicon carbide (SiC), diamond, a...

  3. Thermal Transport in Phosphorene.

    Science.gov (United States)

    Qin, Guangzhao; Hu, Ming

    2018-02-02

    Phosphorene, a novel elemental 2D semiconductor, possesses fascinating chemical and physical properties which are distinctively different from other 2D materials. The rapidly growing applications of phosphorene in nano/optoelectronics and thermoelectrics call for comprehensive studies of thermal transport properties. In this Review, based on the theoretical and experimental progresses, the thermal transport properties of single-layer phosphorene, multilayer phosphorene (nanofilms), and bulk black phosphorus are summarized to give a general view of the overall thermal conductivity trend from single-layer to bulk form. The mechanism underlying the discrepancy in the reported thermal conductivity of phosphorene is discussed by reviewing the effect of different functionals and cutoff distances on the thermal transport evaluations. This Review then provides fundamental insight into the thermal transport in phosphorene by reviewing the role of resonant bonding in driving giant phonon anharmonicity and long-range interactions. In addition, the extrinsic thermal conductivity of phosphorene is reviewed by discussing the effects of strain and substrate, together with phosphorene based heterostructures and nanoribbons. This Review summarizes the progress of thermal transport in phosphorene from both theoretical calculations and experimental measurements, which would be of significance to the design and development of efficient phosphorene based nanoelectronics. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Thermal diffusion (1963)

    International Nuclear Information System (INIS)

    Lemarechal, A.

    1963-01-01

    This report brings together the essential principles of thermal diffusion in the liquid and gaseous phases. The macroscopic and molecular aspects of the thermal diffusion constant are reviewed, as well as the various measurement method; the most important developments however concern the operation of the CLUSIUS and DICKEL thermo-gravitational column and its applications. (author) [fr

  5. Conceptual thermal design

    NARCIS (Netherlands)

    Strijk, R.

    2008-01-01

    Present thermal design tools and methods insufficiently support the development of structural concepts engaged by typical practicing designers. Research described in this thesis identifies the main thermal design problems in practice. In addition, models and methods are developed that support an

  6. Power Electronics Thermal Management

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, Gilberto [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-07

    Thermal modeling was conducted to evaluate and develop thermal management strategies for high-temperature wide-bandgap (WBG)-based power electronics systems. WBG device temperatures of 175 degrees C to 250 degrees C were modeled under various under-hood temperature environments. Modeling result were used to identify the most effective capacitor cooling strategies under high device temperature conditions.

  7. Thermal flow micro sensors

    NARCIS (Netherlands)

    Elwenspoek, Michael Curt

    1999-01-01

    A review is given on sensors fabricated by silicon micromachining technology using the thermal domain for the measurement of fluid flow. Attention is paid especially to performance and geometry of the sensors. Three basic types of thermal flow sensors are discussed: anemometers, calorimetric flow

  8. Paradoxes of Thermal Radiation

    Science.gov (United States)

    Besson, U.

    2009-01-01

    This paper presents an analysis of the thermal behaviour of objects exposed to a solar-type flux of thermal radiation. It aims to clarify certain apparent inconsistencies between theory and observation, and to give a detailed exposition of some critical points that physics textbooks usually treat in an insufficient or incorrect way. In particular,…

  9. Thermal Activated Envelope

    DEFF Research Database (Denmark)

    Foged, Isak Worre; Pasold, Anke

    2015-01-01

    search procedure, the combination of materials and their bonding temperature is found in relation to the envelope effect on a thermal environment inside a defined space. This allows the designer to articulate dynamic composites with time-based thermal functionality, related to the material dynamics...

  10. Reticulocyte maturity indices in iron deficiency anemia

    Directory of Open Access Journals (Sweden)

    Muriel Wollmann

    2014-01-01

    Full Text Available Objective: The aim of this study was to analyze the reticulocyte maturity indices (low, medium, and high fluorescence ratios in iron deficient 1- to 6-year-old children, and identify the prevalence of iron deficiency anemia in this population. Methods: The present study included 39 subjects, divided into two groups: control subjects (n = 33, and subjects with iron deficiency anemia (n = 6. The results were analyzed by Student's t-test for comparison of means. Differences were considered significant when two-tailed p-value < 0.05. Results: Subjects with iron deficiency anemia presented increases in the proportion of mean (10.3 ± 4.7% vs. 6.0 ± 3.4%; p-value = 0.003, and high fluorescence reticulocytes (2.3 ± 0.87% vs. 0.9 ± 0.9%; p-value = 0.03 compared to the control group. The prevalence of anemia in this population was 15% (n = 6. Conclusion: The indices related to immaturity of reticulocytes are higher in the presence of iron deficiency, thus demonstrating a deficiency in the raw material to form hemoglobin and are, therefore, possible early markers of iron deficiency and anemia. We emphasize the need to standardize these indices for use in clinical practice and lab test results.

  11. Solar thermal aircraft

    Science.gov (United States)

    Bennett, Charles L.

    2007-09-18

    A solar thermal powered aircraft powered by heat energy from the sun. A heat engine, such as a Stirling engine, is carried by the aircraft body for producing power for a propulsion mechanism, such as a propeller. The heat engine has a thermal battery in thermal contact with it so that heat is supplied from the thermal battery. A solar concentrator, such as reflective parabolic trough, is movably connected to an optically transparent section of the aircraft body for receiving and concentrating solar energy from within the aircraft. Concentrated solar energy is collected by a heat collection and transport conduit, and heat transported to the thermal battery. A solar tracker includes a heliostat for determining optimal alignment with the sun, and a drive motor actuating the solar concentrator into optimal alignment with the sun based on a determination by the heliostat.

  12. Battery Pack Thermal Design

    Energy Technology Data Exchange (ETDEWEB)

    Pesaran, Ahmad

    2016-06-14

    This presentation describes the thermal design of battery packs at the National Renewable Energy Laboratory. A battery thermal management system essential for xEVs for both normal operation during daily driving (achieving life and performance) and off-normal operation during abuse conditions (achieving safety). The battery thermal management system needs to be optimized with the right tools for the lowest cost. Experimental tools such as NREL's isothermal battery calorimeter, thermal imaging, and heat transfer setups are needed. Thermal models and computer-aided engineering tools are useful for robust designs. During abuse conditions, designs should prevent cell-to-cell propagation in a module/pack (i.e., keep the fire small and manageable). NREL's battery ISC device can be used for evaluating the robustness of a module/pack to cell-to-cell propagation.

  13. Thermal treatment wall

    Science.gov (United States)

    Aines, Roger D.; Newmark, Robin L.; Knauss, Kevin G.

    2000-01-01

    A thermal treatment wall emplaced to perform in-situ destruction of contaminants in groundwater. Thermal destruction of specific contaminants occurs by hydrous pyrolysis/oxidation at temperatures achievable by existing thermal remediation techniques (electrical heating or steam injection) in the presence of oxygen or soil mineral oxidants, such as MnO.sub.2. The thermal treatment wall can be installed in a variety of configurations depending on the specific objectives, and can be used for groundwater cleanup, wherein in-situ destruction of contaminants is carried out rather than extracting contaminated fluids to the surface, where they are to be cleaned. In addition, the thermal treatment wall can be used for both plume interdiction and near-wellhead in-situ groundwater treatment. Thus, this technique can be utilized for a variety of groundwater contamination problems.

  14. Solitonic Josephson Thermal Transport

    Science.gov (United States)

    Guarcello, Claudio; Solinas, Paolo; Braggio, Alessandro; Giazotto, Francesco

    2018-03-01

    We explore the coherent thermal transport sustained by solitons through a long Josephson junction as a thermal gradient across the system is established. We observe that a soliton causes the heat current through the system to increase. Correspondingly, the junction warms up in conjunction with the soliton, with temperature peaks up to, e.g., approximately 56 mK for a realistic Nb-based proposed setup at a bath temperature Tbath=4.2 K . The thermal effects on the dynamics of the soliton are also discussed. Markedly, this system inherits the topological robustness of the solitons. In view of these results, the proposed device can effectively find an application as a superconducting thermal router in which the thermal transport can be locally mastered through solitonic excitations, whose positions can be externally controlled through a magnetic field and a bias current.

  15. Thermal Conductivity in Nanocrystalline Ceria Thin Films

    Energy Technology Data Exchange (ETDEWEB)

    Marat Khafizov; In-Wook Park; Aleksandr Chernatynskiy; Lingfeng He; Jianliang Lin; John J. Moore; David Swank; Thomas Lillo; Simon R. Phillpot; Anter El-Azab; David H. Hurley

    2014-02-01

    The thermal conductivity of nanocrystalline ceria films grown by unbalanced magnetron sputtering is determined as a function of temperature using laser-based modulated thermoreflectance. The films exhibit significantly reduced conductivity compared with stoichiometric bulk CeO2. A variety of microstructure imaging techniques including X-ray diffraction, scanning and transmission electron microscopy, X-ray photoelectron analysis, and electron energy loss spectroscopy indicate that the thermal conductivity is influenced by grain boundaries, dislocations, and oxygen vacancies. The temperature dependence of the thermal conductivity is analyzed using an analytical solution of the Boltzmann transport equation. The conclusion of this study is that oxygen vacancies pose a smaller impediment to thermal transport when they segregate along grain boundaries.

  16. Low Thermal Conductivity Thermal Barrier Coatings Developed

    Science.gov (United States)

    Zhu, Dongming

    2003-01-01

    Thermal barrier coatings (TBCs) are used extensively in modern gas turbine engines to thermally insulate air-cooled metallic components from the hot gases in the engine. These coatings typically consist of a zirconia-yttria ceramic that has been applied by either plasma spraying or physical vapor deposition. Future engines will rely even more heavily on TBCs and will require materials that have even higher temperature capability with improved insulation (i.e., lower thermal conductivity even after many hours at high temperature). This report discusses new TBCs that have been developed with these future requirements in mind. The Ultra-Efficient Engine Technology Program at the NASA Glenn Research Center is funding this effort, which has been conducted primarily at Glenn with contractor support (GE and Howmet) for physical vapor deposition. As stated, the new TBC not only had to be more insulating but the insulation had to persist even after many hours of exposure-that is, the new TBC had to have both lower conductivity and improved sintering resistance. A new type of test rig was developed for this task. This new test approach used a laser to deliver a known high heat flux in an essentially uniform pattern to the surface of the coating, thereby establishing a realistic thermal gradient across its thickness. This gradient was determined from surface and backside pyrometry; and since the heat flux and coating thickness are known, this permitted continuous monitoring of thermal conductivity. Thus, this laser rig allowed very efficient screening of candidate low-conductivity, sinter-resistant TBCs. The coating-design approach selected for these new low-conductivity TBCs was to identify oxide dopants that had the potential to promote the formation of relatively large and stable groupings of defects known as defect clusters. This approach was used because it was felt that such clusters would reduce conductivity while enhancing stability. The approach proved to be

  17. Prevalence of Congenital Malformations

    Directory of Open Access Journals (Sweden)

    Akhavan Karbasi Sedighah

    2009-05-01

    Full Text Available Congenital malformation (CM will begin to emerge as one of the major childhood health problems .Treatment and rehabilitation of children with congenital malformations are costly and complete recovery is usually impossible. The aim of this study was to determine frequency of CM in Yazd central city of the Islamic Republic of Iran to find out if there has been any difference in the rate and types of CM in this area. This descriptive-observational study carried on 4800 births delivered at all maternity hospitals in Yazd from October 2003 to June 2004. Prevalence of CM was 2.83% (2.86 % in male and 2.68 % in female out of the 136 cases 69(51.88% were males and 64 (48.12% were females and 3 with ambiguous genitalia. Positive family history of CM in sibling was in only 6 cases (4.41%.Overall, musculoskeletal (0.83%, central nerv-ous system (0.47% and genital system (0.37% were accounted as the most common. Frequency of CM was more seen in still birth (12.5% as in comparison to live birth (2.71%. There was not statistical difference be-tween prevalence of CM and neonatal's gender, gestational age, birth order and mother's age, drug ingestion, illness and parental consanguinity. In this study the overall prevalence of congenital malformation among the newborn was higher than those previous reported in Iran and determining the causes of this difference needs more extensive studies.

  18. Thermal Analysis of Filler Reinforced Polymeric Composites

    Science.gov (United States)

    Ghadge, Mahesh Devidas

    Improving heat dissipating property of composite materials is becoming increasingly important in domains ranging from the automotive industry, electronic devices to aeronautical industry. Effective heat dissipation is required especially in aircraft and racing tires to guarantee high performance and good service life [1]. The present study is focused on improving the thermal conductivity of Emulsion-styrene butadiene rubber (ESBR) which is a cheap alternative to other rubber composites. The disadvantages of ESBR are low thermal conductivity and high heat generation. Adding fillers with high thermal conductivity to ESBR is proposed as a technique for improving the thermal conductivity of ESBR. The purpose of the research is to predict the thermal conductivity of ESBR when filled with fillers of much higher thermal conductivity and also to find out to what extent the filler properties affect the heat transfer capabilities of the composite matrix. The influence of different filler shapes i.e. spherical, cylindrical and platelets on the overall thermal capability of composite matrix is studied, the finite element modelings are conducted using Abaqus. Three-dimensional and two-dimensional models are created in Abaqus to simulate the microstructure of the composite matrix filled with fillers. Results indicate that the overall thermal conductivity increases with increasing filler loading i.e. for a filler volume fraction of 0.27, the conductivity increased by around 50%. Filler shapes, orientation angle, and aspect ratio of the fillers significantly influences the thermal conductivity. Conductivity increases with increasing aspect ratio (length/diameter) of the cylindrical fillers since longer conductive chains are able to form at the same volume percentage as compared to spherical fillers. The composite matrix reaches maximum thermal conductivity when the cylindrical fillers are oriented in the direction of heat flow. The heat conductivity predicted by FEM for ESBR is

  19. Apollo telescope mount thermal systems unit thermal vacuum test

    Science.gov (United States)

    Trucks, H. F.; Hueter, U.; Wise, J. H.; Bachtel, F. D.

    1971-01-01

    The Apollo Telescope Mount's thermal systems unit was utilized to conduct a full-scale thermal vacuum test to verify the thermal design and the analytical techniques used to develop the thermal mathematical models. Thermal vacuum test philosophy, test objectives configuration, test monitoring, environment simulation, vehicle test performance, and data correlation are discussed. Emphasis is placed on planning and execution of the thermal vacuum test with particular attention on problems encountered in conducting a test of this maguitude.

  20. Experimental study of thermal rectification in suspended monolayer graphene

    Science.gov (United States)

    Wang, Haidong; Hu, Shiqian; Takahashi, Koji; Zhang, Xing; Takamatsu, Hiroshi; Chen, Jie

    2017-06-01

    Thermal rectification is a fundamental phenomenon for active heat flow control. Significant thermal rectification is expected to exist in the asymmetric nanostructures, such as nanowires and thin films. As a one-atom-thick membrane, graphene has attracted much attention for realizing thermal rectification as shown by many molecular dynamics simulations. Here, we experimentally demonstrate thermal rectification in various asymmetric monolayer graphene nanostructures. A large thermal rectification factor of 26% is achieved in a defect-engineered monolayer graphene with nanopores on one side. A thermal rectification factor of 10% is achieved in a pristine monolayer graphene with nanoparticles deposited on one side or with a tapered width. The results indicate that the monolayer graphene has great potential to be used for designing high-performance thermal rectifiers for heat flow control and energy harvesting.

  1. Thermal conductivity of silicon nanocrystals and polystyrene nanocomposite thin films

    International Nuclear Information System (INIS)

    Juangsa, Firman Bagja; Muroya, Yoshiki; Nozaki, Tomohiro; Ryu, Meguya; Morikawa, Junko

    2016-01-01

    Silicon nanocrystals (SiNCs) are well known for their size-dependent optical and electronic properties; they also have the potential for low yet controllable thermal properties. As a silicon-based low-thermal conductivity material is required in microdevice applications, SiNCs can be utilized for thermal insulation. In this paper, SiNCs and polymer nanocomposites were produced, and their thermal conductivity, including the density and specific heat, was measured. Measurement results were compared with thermal conductivity models for composite materials, and the comparison shows a decreasing value of the thermal conductivity, indicating the effect of the size and presence of the nanostructure on the thermal conductivity. Moreover, employing silicon inks at room temperature during the fabrication process enables a low cost of fabrication and preserves the unique properties of SiNCs. (paper)

  2. Thermal comfort assessment of buildings

    CERN Document Server

    Carlucci, Salvatore

    2013-01-01

    A number of metrics for assessing human thermal response to climatic conditions have been proposed in scientific literature over the last decades. They aim at describing human thermal perception of the thermal environment to which an individual or a group of people is exposed. More recently, a new type of “discomfort index” has been proposed for describing, in a synthetic way, long-term phenomena. Starting from a systematic review of a number of long-term global discomfort indices, they are then contrasted and compared on a reference case study in order to identify their similarities and differences and strengths and weaknesses. Based on this analysis, a new short-term local discomfort index is proposed for the American Adaptive comfort model. Finally, a new and reliable long-term general discomfort index is presented. It is delivered in three versions and each of them is suitable to be respectively coupled with the Fanger, the European Adaptive and the American Adaptive comfort models.

  3. NASA's Nuclear Thermal Propulsion Project

    Science.gov (United States)

    Houts, Michael G.; Mitchell, Doyce P.; Kim, Tony; Emrich, William J.; Hickman, Robert R.; Gerrish, Harold P.; Doughty, Glen; Belvin, Anthony; Clement, Steven; Borowski, Stanley K.; hide

    2015-01-01

    The fundamental capability of Nuclear Thermal Propulsion (NTP) is game changing for space exploration. A first generation NTP system could provide high thrust at a specific impulse above 900 s, roughly double that of state of the art chemical engines. Characteristics of fission and NTP indicate that useful first generation systems will provide a foundation for future systems with extremely high performance. The role of a first generation NTP in the development of advanced nuclear propulsion systems could be analogous to the role of the DC- 3 in the development of advanced aviation. Progress made under the NTP project could also help enable high performance fission power systems and Nuclear Electric Propulsion (NEP).

  4. THERMAL CONDUCTIVITY ANALYSIS OF GASES

    Science.gov (United States)

    Clark, W.J.

    1949-06-01

    This patent describes apparatus for the quantitative analysis of a gaseous mixture at subatmospheric pressure by measurement of its thermal conductivity. A heated wire forms one leg of a bridge circuit, while the gas under test is passed about the wire at a constant rate. The bridge unbalance will be a measure of the change in composition of the gas, if compensation is made for the effect due to gas pressure change. The apparatus provides a voltage varying with fluctuations of pressure in series with the indicating device placed across the bridge, to counterbalance the voltage change caused by fluctuations in the pressure of the gaseous mixture.

  5. Prevalence of smoking in Cambodia.

    Science.gov (United States)

    Smith, M; Umenai, T; Radford, C

    1998-06-01

    To evaluate the prevalence of cigarette smoking in Cambodia and identify prevailing knowledge, attitudes and practices (KAP). Information on tobacco smoking and KAP was collected using the 30-cluster survey design wherein 10-15 males (age over 15 years) were interviewed from each of 30 randomly-selected population clusters in Phnom Penh (herein referred to as 'urban') and Siem Reap (herein referred to as 'rural') for a total of 601 interviews. Findings show that 65% of urban respondents and 86% of rural respondents smoke. Rural men start smoking at an earlier age, but the average urban smoker spends more. 17% of an urban smoker's personal cash income is spent on tobacco, whereas his rural counterpart spends 8%. This discrepancy is partly due to extensive tobacco brandname promotion in urban areas which has resulted in the average price of a pack of cigarettes being four times higher than that of rural. Other findings show an inverse correlation between incidence of smoking and levels of education/income. Concerning smoking cessation, 66% of urban smokers and 86% of rural smokers interviewed indicated they would attend a program in their area to stop smoking if such a program were available. The high prevalence of smoking in Cambodia, and the health impact it has and will increasingly have on its people is significant. The high cash expenditure for tobacco, especially in urban, is an important factor contributing to Cambodia's impoverished economy. Education, regulatory policies, and smoking cessation are important measures to be considered for effective tobacco control planning and implementation.

  6. Reliability and usability of tourism climate indices

    Directory of Open Access Journals (Sweden)

    Ghislain Dubois

    2016-04-01

    Full Text Available Abstract Tourism climate indices (TCI are commonly used to describe the climate conditions suitable for tourism activities, from the planning, investment or daily operations perspectives. A substantial amount of research has been carried out, in particular with respect to new indices formulae adapted to specific tourism products, and parameters and their weighting, taking into account surveys on the stated preferences of tourists, especially in terms of comfort. This paper illustrates another field of research, which seeks to better understand the different sources of uncertainty associated with indices. Indeed, slight differences in formula thresholds, variations in computation methods, and also the use of multimodel ensembles create nuances that affect the ways in which indices projections are usually presented. Firstly, we assess the impact of differences in preference surveys on the definition of indices thresholds, in particular for thermal comfort. Secondly, we compare computation methods for France, showing the need to better specify detailed data sources and their use to ensure the comparability of results. Thirdly, using multimodel ensembles for the Mediterranean basin, we assess the uncertainty inherent in long-term projections, which are used in modelling the economic impact of climate change. This paper argues in favour of a more cautious use of tourism comfort indices, with more consideration given to the robustness of data (validation, debiasing, uncertainty assessment, etc. and users’ needs, from the climate services perspective.

  7. Prevalence of congenital amusia.

    Science.gov (United States)

    Peretz, Isabelle; Vuvan, Dominique T

    2017-05-01

    Congenital amusia (commonly known as tone deafness) is a lifelong musical disorder that affects 4% of the population according to a single estimate based on a single test from 1980. Here we present the first large-based measure of prevalence with a sample of 20 000 participants, which does not rely on self-referral. On the basis of three objective tests and a questionnaire, we show that (a) the prevalence of congenital amusia is only 1.5%, with slightly more females than males, unlike other developmental disorders where males often predominate; (b) self-disclosure is a reliable index of congenital amusia, which suggests that congenital amusia is hereditary, with 46% first-degree relatives similarly affected; (c) the deficit is not attenuated by musical training and (d) it emerges in relative isolation from other cognitive disorder, except for spatial orientation problems. Hence, we suggest that congenital amusia is likely to result from genetic variations that affect musical abilities specifically.

  8. Thermal and Alignment Analysis of the Instrument-Level ATLAS Thermal Vacuum Test

    Science.gov (United States)

    Bradshaw, Heather

    2012-01-01

    This paper describes the thermal analysis and test design performed in preparation for the ATLAS thermal vacuum test. NASA's Advanced Topographic Laser Altimeter System (ATLAS) will be flown as the sole instrument aboard the Ice, Cloud, and land Elevation Satellite-2 (ICESat-2). It will be used to take measurements of topography and ice thickness for Arctic and Antarctic regions, providing crucial data used to predict future changes in worldwide sea levels. Due to the precise measurements ATLAS is taking, the laser altimeter has very tight pointing requirements. Therefore, the instrument is very sensitive to temperature-induced thermal distortions. For this reason, it is necessary to perform a Structural, Thermal, Optical Performance (STOP) analysis not only for flight, but also to ensure performance requirements can be operationally met during instrument-level thermal vacuum testing. This paper describes the thermal model created for the chamber setup, which was used to generate inputs for the environmental STOP analysis. This paper also presents the results of the STOP analysis, which indicate that the test predictions adequately replicate the thermal distortions predicted for flight. This is a new application of an existing process, as STOP analyses are generally performed to predict flight behavior only. Another novel aspect of this test is that it presents the opportunity to verify pointing results of a STOP model, which is not generally done. It is possible in this case, however, because the actual pointing will be measured using flight hardware during thermal vacuum testing and can be compared to STOP predictions.

  9. Passenger thermal perceptions, thermal comfort requirements, and adaptations in short- and long-haul vehicles.

    Science.gov (United States)

    Lin, Tzu-Ping; Hwang, Ruey-Lung; Huang, Kuo-Tsang; Sun, Chen-Yi; Huang, Ying-Che

    2010-05-01

    While thermal comfort in mass transportation vehicles is relevant to service quality and energy consumption, benchmarks for such comfort that reflect the thermal adaptations of passengers are currently lacking. This study reports a field experiment involving simultaneous physical measurements and a questionnaire survey, collecting data from 2,129 respondents, that evaluated thermal comfort in short- and long-haul buses and trains. Experimental results indicate that high air temperature, strong solar radiation, and low air movement explain why passengers feel thermally uncomfortable. The overall insulation of clothing worn by passengers and thermal adaptive behaviour in vehicles differ from those in their living and working spaces. Passengers in short-haul vehicles habitually adjust the air outlets to increase thermal comfort, while passengers in long-haul vehicles prefer to draw the drapes to reduce discomfort from extended exposure to solar radiation. The neutral temperatures for short- and long-haul vehicles are 26.2 degrees C and 27.4 degrees C, while the comfort zones are 22.4-28.9 degrees C and 22.4-30.1 degrees C, respectively. The results of this study provide a valuable reference for practitioners involved in determining the adequate control and management of in-vehicle thermal environments, as well as facilitating design of buses and trains, ultimately contributing to efforts to achieve a balance between the thermal comfort satisfaction of passengers and energy conserving measures for air-conditioning in mass transportation vehicles.

  10. [Prevalence of arterial hypertension in Cushing's syndrome].

    Science.gov (United States)

    Rodrigues, D; Barros, L; Ruas, L; Gomes, L; Geraldes, E; Ruas, M C

    1997-11-01

    To determine the prevalence of hypertension (HT) in patients with Cushing's syndrome. We studied 23 patients with Cushing's syndrome, 17 women (mean +/- SD age = 42.8 +/- 15.6 years) and 6 men (mean +/- SD age = 34.8 +/- 10.2 years). The etiologies were: 16-Cushing's disease, 3-suprarenal adenoma, 2-suprarenal carcinoma and 2-iatrogenic. Blood pressure (BP) was measured at least three times and we consider hypertension when systolic BP > or = 140 mmHg and/or diastolic BP > or = 90 mmHg. The prevalence of HT, at diagnosis, was 73.9% (64.7% in women and 100% in men) and the mean BP was 163 +/- 25/100 +/- 16 mmHg (158 +/- 26/97 +/- 15 mmHg in women and 182 +/- 5/114 +/- 10 mmHg in men). From the 16 patients with Cushing's disease, 13 (81%) had HT; all the patients (n = 3) with suprarenal adenoma had HT; none with suprarenal carcinoma (n = 2) had HT and only 1 of the 2 patients with iatrogenic Cushing's syndrome had HT. After treatment, 14 patients entered remission, 6 persisted with active disease and 1 was missed during the follow-up. In the group of patients that entered remission, the prevalence of HT at diagnosis was 78.5% (n = 11), 57.1% (n = 8) being after treatment. In this study, we found a high prevalence of HT at diagnosis (73.9%). After treatment and in the patients that entered remission, the prevalence of HT remained high (78.5% vs 57.1%). The high prevalence of HT in Cushing's syndrome, suggests its importance as a morbidity factor and also as an important diagnostic indicator, when present.

  11. Thermalized axion inflation

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Ricardo Z.; Notari, Alessio, E-mail: rferreira@icc.ub.edu, E-mail: notari@ub.edu [Departament de Física Quàntica i Astrofísica i Institut de Ciències del Cosmos (ICCUB), Universitat de Barcelona, Martí i Franquès, 1, E-08028, Barcelona (Spain)

    2017-09-01

    We analyze the dynamics of inflationary models with a coupling of the inflaton φ to gauge fields of the form φ F F-tilde / f , as in the case of axions. It is known that this leads to an instability, with exponential amplification of gauge fields, controlled by the parameter ξ= φ-dot /(2 fH ), which can strongly affect the generation of cosmological perturbations and even the background. We show that scattering rates involving gauge fields can become larger than the expansion rate H , due to the very large occupation numbers, and create a thermal bath of particles of temperature T during inflation. In the thermal regime, energy is transferred to smaller scales, radically modifying the predictions of this scenario. We thus argue that previous constraints on ξ are alleviated. If the gauge fields have Standard Model interactions, which naturally provides reheating, they thermalize already at ξ∼>2.9, before perturbativity constraints and also before backreaction takes place. In absence of SM interactions (i.e. for a dark photon), we find that gauge fields and inflaton perturbations thermalize if ξ∼>3.4; however, observations require ξ∼>6, which is above the perturbativity and backreaction bounds and so a dedicated study is required. After thermalization, though, the system should evolve non-trivially due to the competition between the instability and the gauge field thermal mass. If the thermal mass and the instabilities equilibrate, we expect an equilibrium temperature of T {sub eq} ≅ ξ H / g-bar where g-bar is the effective gauge coupling. Finally, we estimate the spectrum of perturbations if φ is thermal and find that the tensor to scalar ratio is suppressed by H /(2 T ), if tensors do not thermalize.

  12. Thermally promoted addition of undecylenic acid on thermally hydrocarbonized porous silicon optical reflectors

    OpenAIRE

    Jalkanen, Tero; Mäkilä, Ermei; Sakka, Tetsuo; Salonen, Jarno; Ogata, Yukio H

    2012-01-01

    Thermally promoted addition of undecylenic acid is studied as a method for modifying porous silicon optical reflectors that have been pre-treated with thermal hydrocarbonization. Successful derivatization of undecylenic acid is demonstrated and confirmed with Fourier transform infrared and X-ray photoelectron spectroscopies. The results indicate that the hydrocarbonization pre-treatment considerably improves stability against oxidation and chemical dissolution in basic environments. The two-s...

  13. Advanced thermal management materials

    CERN Document Server

    Jiang, Guosheng; Kuang, Ken

    2012-01-01

    ""Advanced Thermal Management Materials"" provides a comprehensive and hands-on treatise on the importance of thermal packaging in high performance systems. These systems, ranging from active electronically-scanned radar arrays to web servers, require components that can dissipate heat efficiently. This requires materials capable of dissipating heat and maintaining compatibility with the packaging and dye. Its coverage includes all aspects of thermal management materials, both traditional and non-traditional, with an emphasis on metal based materials. An in-depth discussion of properties and m

  14. Environmental thermal stress.

    Science.gov (United States)

    Keim, Samuel M; Guisto, John A; Sullivan, John B

    2002-01-01

    Thermal stress from cold and heat can affect health and productivity in a wide range of environmental and workload conditions. Health risks typically occur in the outer zones of heat and cold stress, but are also related to workload. Environmental factors related to thermal stress are reviewed. Individuals undergo thermoregulatory physiologic changes to adapt and these changes are reviewed. Heat and cold related illnesses are reviewed as well as their appropriate therapy. Published standards, thresholds and recommendations regarding work practices, personal protection and types of thermal loads are reviewed.

  15. Negative thermal expansion

    International Nuclear Information System (INIS)

    Barrera, G D; Bruno, J A O; Barron, T H K; Allan, N L

    2005-01-01

    There has been substantial renewed interest in negative thermal expansion following the discovery that cubic ZrW 2 O 8 contracts over a temperature range in excess of 1000 K. Substances of many different kinds show negative thermal expansion, especially at low temperatures. In this article we review the underlying thermodynamics, emphasizing the roles of thermal stress and elasticity. We also discuss vibrational and non-vibrational mechanisms operating on the atomic scale that are responsible for negative expansion, both isotropic and anisotropic, in a wide range of materials. (topical review)

  16. Thermal energy storage

    Science.gov (United States)

    Grodzka, P. G.; Picklesimer, E. A.

    1978-01-01

    The general scope of study on thermal energy storage development includes: (1) survey and review possible concepts for storing thermal energy; (2) evaluate the potentials of the surveyed concepts for practical applications in the low and high temperature ranges for thermal control and storage, with particular emphasis on the low temperature range, and designate the most promising concepts; and (3) determine the nature of further studies required to expeditiously convert the most promising concept(s) to practical applications. Cryogenic temperature control by means of energy storage materials was also included.

  17. Alternatives to eigenstate thermalization.

    Science.gov (United States)

    Rigol, Marcos; Srednicki, Mark

    2012-03-16

    An isolated quantum many-body system in an initial pure state will come to thermal equilibrium if it satisfies the eigenstate thermalization hypothesis (ETH). We consider alternatives to ETH that have been proposed. We first show that von Neumann's quantum ergodic theorem relies on an assumption that is essentially equivalent to ETH. We also investigate whether, following a sudden quench, special classes of pure states can lead to thermal behavior in systems that do not obey ETH, namely, integrable systems. We find examples of this, but only for initial states that obeyed ETH before the quench.

  18. High-Resolution Thermal Inertia Mapping from the Mars Global Surveyor Thermal Emission Spectrometer

    Science.gov (United States)

    Mellon, M.T.; Jakosky, B.M.; Kieffer, H.H.; Christensen, P.R.

    2000-01-01

    High-resolution thermal inertia mapping results are presented, derived from Mars Global Surveyor (MGS) Thermal Emission Spectrometer (TES) observations of the surface temperature of Mars obtained during the early portion of the MGS mapping mission. Thermal inertia is the key property controlling the diurnal surface temperature variations, and is dependent on the physical character of the top few centimeters of the surface. It represents a complex combination of particle size, rock abundance, exposures of bedrock, and degree of induration. In this work we describe the derivation of thermal inertia from TES data, present global scale analysis, and place these results into context with earlier work. A global map of nighttime thermal-bolometer-based thermal inertia is presented at 14?? per pixel resolution, with approximately 63% coverage between 50??S and 70??N latitude. Global analysis shows a similar pattern of high and low thermal inertia as seen in previous Viking low-resolution mapping. Significantly more detail is present in the high-resolution TES thermal inertia. This detail represents horizontal small-scale variability in the nature of the surface. Correlation with albedo indicates the presence of a previously undiscovered surface unit of moderate-to-high thermal inertia and intermediate albedo. This new unit has a modal peak thermal inertia of 180-250 J m-2 K-1 s-12 and a narrow range of albedo near 0.24. The unit, covering a significant fraction of the surface, typically surrounds the low thermal inertia regions and may comprise a deposit of indurated fine material. Local 3-km-resolution maps are also presented as examples of eolian, fluvial, and volcanic geology. Some impact crater rims and intracrater dunes show higher thermal inertias than the surrounding terrain; thermal inertia of aeolian deposits such as intracrater dunes may be related to average particle size. Outflow channels and valleys consistently show higher thermal inertias than the

  19. Impact of thermal stress on evolutionary trajectories of pathogen resistance in three-spined stickleback (Gasterosteus aculeatus).

    Science.gov (United States)

    Schade, Franziska M; Shama, Lisa N S; Wegner, K Mathias

    2014-07-26

    Pathogens are a major regulatory force for host populations, especially under stressful conditions. Elevated temperatures may enhance the development of pathogens, increase the number of transmission stages, and can negatively influence host susceptibility depending on host thermal tolerance. As a net result, this can lead to a higher prevalence of epidemics during summer months. These conditions also apply to marine ecosystems, where possible ecological impacts and the population-specific potential for evolutionary responses to changing environments and increasing disease prevalence are, however, less known. Therefore, we investigated the influence of thermal stress on the evolutionary trajectories of disease resistance in three marine populations of three-spined sticklebacks Gasterosteus aculeatus by combining the effects of elevated temperature and infection with a bacterial strain of Vibrio sp. using a common garden experiment. We found that thermal stress had an impact on fish weight and especially on survival after infection after only short periods of thermal acclimation. Environmental stress reduced genetic differentiation (QST) between populations by releasing cryptic within-population variation. While life history traits displayed positive genetic correlations across environments with relatively weak genotype by environment interactions (GxE), environmental stress led to negative genetic correlations across environments in pathogen resistance. This reversal of genetic effects governing resistance is probably attributable to changing environment-dependent virulence mechanisms of the pathogen interacting differently with host genotypes, i.e. GPathogenxGHostxE or (GPathogenxE)x(GHostxE) interactions, rather than to pure host genetic effects, i.e. GHostxE interactions. To cope with climatic changes and the associated increase in pathogen virulence, host species require wide thermal tolerances and pathogen-resistant genotypes. The higher resistance we found

  20. Compliant thermal microactuators

    DEFF Research Database (Denmark)

    Jonsmann, Jacques; Sigmund, Ole; Bouwstra, Siebe

    1999-01-01

    Two dimensional compliant metallic thermal microactuators are designed using topology optimisation, and microfabricated using rapid prototyping techniques. Structures are characterised using advanced image analysis, yielding a very high precision. Characterised structures behave in a way which can...

  1. Thermal hyperbolic metamaterials.

    Science.gov (United States)

    Guo, Yu; Jacob, Zubin

    2013-06-17

    We explore the near-field radiative thermal energy transfer properties of hyperbolic metamaterials. The presence of unique electromagnetic states in a broad bandwidth leads to super-planckian thermal energy transfer between metamaterials separated by a nano-gap. We consider practical phonon-polaritonic metamaterials for thermal engineering in the mid-infrared range and show that the effect exists in spite of the losses, absorption and finite unit cell size. For thermophotovoltaic energy conversion applications requiring energy transfer in the near-infrared range we introduce high temperature hyperbolic metamaterials based on plasmonic materials with a high melting point. Our work paves the way for practical high temperature radiative thermal energy transfer applications of hyperbolic metamaterials.

  2. GAPCON-THERMAL-3

    International Nuclear Information System (INIS)

    Mohr, C.L.; Lanning, D.D.; Panisko, F.E.

    1979-01-01

    The fuel performance code GAPCON-THERMAL-3 has been expanded to include recent transient material deformation constitutive relations and the FLECHT heat transfer correlation. The modifications make it possible to compute the thermal and mechanical response of nuclear fuel to postulated Loss of Coolant Accidents (LOCA). The numerical formulation has the capability of predicting both steady state and transient behavior of a fuel rod using a single analytical procedure. GAPCON-THERMAL-3 (G-T-3) uses a specialized finite element procedure for mechanics predictions and the method of weighted residuals and finite difference techniques to compute temperature and thermal behavior. Fuel behavior, gas release models, gas conductance models, and stored energy calculations are applicable to both steady state and transient conditions. The code has been used to perform scoping analysis for in-reactor LOCA simulation testing. (orig.)

  3. Thermal Properties Measurement Report

    Energy Technology Data Exchange (ETDEWEB)

    Carmack, Jon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Braase, Lori [Idaho National Lab. (INL), Idaho Falls, ID (United States); Papesch, Cynthia [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hurley, David [Idaho National Lab. (INL), Idaho Falls, ID (United States); Tonks, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Zhang, Yongfeng [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gofryk, Krzysztof [Idaho National Lab. (INL), Idaho Falls, ID (United States); Harp, Jason [Idaho National Lab. (INL), Idaho Falls, ID (United States); Fielding, Randy [Idaho National Lab. (INL), Idaho Falls, ID (United States); Knight, Collin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Meyer, Mitch [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-08-01

    The Thermal Properties Measurement Report summarizes the research, development, installation, and initial use of significant experimental thermal property characterization capabilities at the INL in FY 2015. These new capabilities were used to characterize a U3Si2 (candidate Accident Tolerant) fuel sample fabricated at the INL. The ability to perform measurements at various length scales is important and provides additional data that is not currently in the literature. However, the real value of the data will be in accomplishing a phenomenological understanding of the thermal conductivity in fuels and the ties to predictive modeling. Thus, the MARMOT advanced modeling and simulation capability was utilized to illustrate how the microstructural data can be modeled and compared with bulk characterization data. A scientific method was established for thermal property measurement capability on irradiated nuclear fuel samples, which will be installed in the Irradiated Material Characterization Laboratory (IMCL).

  4. Thermal Acoustic Fatigue Apparatus

    Data.gov (United States)

    Federal Laboratory Consortium — The Thermal Acoustic Fatigue Apparatus (TAFA) is a progressive wave tube test facility that is used to test structures for dynamic response and sonic fatigue due to...

  5. Controlled Thermal Expansion Alloys

    Data.gov (United States)

    National Aeronautics and Space Administration — There has always been a need for controlled thermal expansion alloys suitable for mounting optics and detectors in spacecraft applications.  These alloys help...

  6. Nanoscale thermal transport

    Science.gov (United States)

    Cahill, David G.; Ford, Wayne K.; Goodson, Kenneth E.; Mahan, Gerald D.; Majumdar, Arun; Maris, Humphrey J.; Merlin, Roberto; Phillpot, Simon R.

    2003-01-01

    Rapid progress in the synthesis and processing of materials with structure on nanometer length scales has created a demand for greater scientific understanding of thermal transport in nanoscale devices, individual nanostructures, and nanostructured materials. This review emphasizes developments in experiment, theory, and computation that have occurred in the past ten years and summarizes the present status of the field. Interfaces between materials become increasingly important on small length scales. The thermal conductance of many solid-solid interfaces have been studied experimentally but the range of observed interface properties is much smaller than predicted by simple theory. Classical molecular dynamics simulations are emerging as a powerful tool for calculations of thermal conductance and phonon scattering, and may provide for a lively interplay of experiment and theory in the near term. Fundamental issues remain concerning the correct definitions of temperature in nonequilibrium nanoscale systems. Modern Si microelectronics are now firmly in the nanoscale regime—experiments have demonstrated that the close proximity of interfaces and the extremely small volume of heat dissipation strongly modifies thermal transport, thereby aggravating problems of thermal management. Microelectronic devices are too large to yield to atomic-level simulation in the foreseeable future and, therefore, calculations of thermal transport must rely on solutions of the Boltzmann transport equation; microscopic phonon scattering rates needed for predictive models are, even for Si, poorly known. Low-dimensional nanostructures, such as carbon nanotubes, are predicted to have novel transport properties; the first quantitative experiments of the thermal conductivity of nanotubes have recently been achieved using microfabricated measurement systems. Nanoscale porosity decreases the permittivity of amorphous dielectrics but porosity also strongly decreases the thermal conductivity. The

  7. ERICA: smoking prevalence in Brazilian adolescents

    Directory of Open Access Journals (Sweden)

    Valeska Carvalho Figueiredo

    2016-02-01

    Full Text Available ABSTRACT OBJECTIVE To estimate the prevalences of tobacco use, tobacco experimentation, and frequent smoking among Brazilian adolescents. METHODS We evaluated participants of the cross-sectional, nation-wide, school-based Study of Cardiovascular Risks in Adolescents (ERICA, which included 12- to 17-year-old adolescents from municipalities of over 100 thousand inhabitants. The study sample had a clustered, stratified design and was representative of the whole country, its geographical regions, and all 27 state capitals. The information was obtained with self-administered questionnaires. Tobacco experimentation was defined as having tried cigarettes at least once in life. Adolescents who had smoked on at least one day over the previous 30 days were considered current cigarette smokers. Having smoked cigarettes for at least seven consecutive days was an indicator for regular consumption of tobacco. Considering the complex sampling design, prevalences and 95% confidence intervals were estimated according to sociodemographic and socio-environmental characteristics. RESULTS We evaluated 74,589 adolescents. Among these, 18.5% (95%CI 17.7-19.4 had smoked at least once in life, 5.7% (95%CI 5.3-6.2 smoked at the time of the research, and 2.5% (95%CI 2.2-2.8 smoked often. Adolescents aged 15 to 17 years had higher prevalences for all indicators than those aged 12 to 14 years. The prevalences did not differ significantly between sexes. The highest prevalences were found in the South region and the lowest ones, in the Northeast region. Regardless of sex, the prevalences were found to be higher for adolescents who had had paid jobs, who lived with only one parent, and who reported having been in contact with smokers either inside or outside their homes. Female public school adolescents were found to smoke more than the ones from private schools. CONCLUSIONS Tobacco use among adolescents is still a challenge. Intending to reduce the prevalence of tobacco use

  8. ERICA: smoking prevalence in Brazilian adolescents

    Science.gov (United States)

    Figueiredo, Valeska Carvalho; Szklo, André Salem; Costa, Letícia Casado; Kuschnir, Maria Cristina C; da Silva, Thiago Luiz Nogueira; Bloch, Katia Vergetti; Szklo, Moyses

    2016-01-01

    ABSTRACT OBJECTIVE To estimate the prevalences of tobacco use, tobacco experimentation, and frequent smoking among Brazilian adolescents. METHODS We evaluated participants of the cross-sectional, nation-wide, school-based Study of Cardiovascular Risks in Adolescents (ERICA), which included 12- to 17-year-old adolescents from municipalities of over 100 thousand inhabitants. The study sample had a clustered, stratified design and was representative of the whole country, its geographical regions, and all 27 state capitals. The information was obtained with self-administered questionnaires. Tobacco experimentation was defined as having tried cigarettes at least once in life. Adolescents who had smoked on at least one day over the previous 30 days were considered current cigarette smokers. Having smoked cigarettes for at least seven consecutive days was an indicator for regular consumption of tobacco. Considering the complex sampling design, prevalences and 95% confidence intervals were estimated according to sociodemographic and socio-environmental characteristics. RESULTS We evaluated 74,589 adolescents. Among these, 18.5% (95%CI 17.7-19.4) had smoked at least once in life, 5.7% (95%CI 5.3-6.2) smoked at the time of the research, and 2.5% (95%CI 2.2-2.8) smoked often. Adolescents aged 15 to 17 years had higher prevalences for all indicators than those aged 12 to 14 years. The prevalences did not differ significantly between sexes. The highest prevalences were found in the South region and the lowest ones, in the Northeast region. Regardless of sex, the prevalences were found to be higher for adolescents who had had paid jobs, who lived with only one parent, and who reported having been in contact with smokers either inside or outside their homes. Female public school adolescents were found to smoke more than the ones from private schools. CONCLUSIONS Tobacco use among adolescents is still a challenge. Intending to reduce the prevalence of tobacco use among young

  9. Parametric optimization of daylight and thermal performance ...

    African Journals Online (AJOL)

    The results of the paper show that there are meaningful optimum parameters which may help for better thermal performance through louvers in hot and dry climate of Tehran. The results indicate impressive efficiency in building industry in contemporary architecture of developing countries especially in Iran and west of Asia.

  10. Thermal Anemometry Grid Sensor

    OpenAIRE

    Arlit, Martin; Schleicher, Eckhard; Hampel, Uwe

    2017-01-01

    A novel thermal anemometry grid sensor was developed for the simultaneous measurement of cross-sectional temperature and axial velocity distribution in a fluid flow. The sensor consists of a set of platinum resistors arranged in a regular grid. Each platinum resistor allows the simultaneous measurement of fluid temperature via electrical resistance and flow velocity via constant voltage thermal anemometry. Cross-sectional measurement was enabled by applying a special multiplexing-excitation s...

  11. Thermal decomposition process of silver behenate

    International Nuclear Information System (INIS)

    Liu Xianhao; Lu Shuxia; Zhang Jingchang; Cao Weiliang

    2006-01-01

    The thermal decomposition processes of silver behenate have been studied by infrared spectroscopy (IR), X-ray diffraction (XRD), combined thermogravimetry-differential thermal analysis-mass spectrometry (TG-DTA-MS), transmission electron microscopy (TEM) and UV-vis spectroscopy. The TG-DTA and the higher temperature IR and XRD measurements indicated that complicated structural changes took place while heating silver behenate, but there were two distinct thermal transitions. During the first transition at 138 deg. C, the alkyl chains of silver behenate were transformed from an ordered into a disordered state. During the second transition at about 231 deg. C, a structural change took place for silver behenate, which was the decomposition of silver behenate. The major products of the thermal decomposition of silver behenate were metallic silver and behenic acid. Upon heating up to 500 deg. C, the final product of the thermal decomposition was metallic silver. The combined TG-MS analysis showed that the gas products of the thermal decomposition of silver behenate were carbon dioxide, water, hydrogen, acetylene and some small molecule alkenes. TEM and UV-vis spectroscopy were used to investigate the process of the formation and growth of metallic silver nanoparticles

  12. Method and apparatus for measuring thermal neutron characteristics

    International Nuclear Information System (INIS)

    Jacobson, L.A.; Johnstone, C.M.

    1980-01-01

    A system of measuring the thermal neutron decay characteristics of an earth formation is described. The method consists of detecting indications of the thermal neutron concentration in the formation during a selected set of two measurement intervals following irradiation of the formation with a burst of fast neutrons. (U.K.)

  13. Space Shuttle Orbiter thermal protection system design and flight experience

    Science.gov (United States)

    Curry, Donald M.

    1993-01-01

    The Space Shuttle Orbiter Thermal Protection System materials, design approaches associated with each material, and the operational performance experienced during fifty-five successful flights are described. The flights to date indicate that the thermal and structural design requirements were met and that the overall performance was outstanding.

  14. Nanoscale thermal probing

    Directory of Open Access Journals (Sweden)

    Yanan Yue

    2012-03-01

    Full Text Available Nanoscale novel devices have raised the demand for nanoscale thermal characterization that is critical for evaluating the device performance and durability. Achieving nanoscale spatial resolution and high accuracy in temperature measurement is very challenging due to the limitation of measurement pathways. In this review, we discuss four methodologies currently developed in nanoscale surface imaging and temperature measurement. To overcome the restriction of the conventional methods, the scanning thermal microscopy technique is widely used. From the perspective of measuring target, the optical feature size method can be applied by using either Raman or fluorescence thermometry. The near-field optical method that measures nanoscale temperature by focusing the optical field to a nano-sized region provides a non-contact and non-destructive way for nanoscale thermal probing. Although the resistance thermometry based on nano-sized thermal sensors is possible for nanoscale thermal probing, significant effort is still needed to reduce the size of the current sensors by using advanced fabrication techniques. At the same time, the development of nanoscale imaging techniques, such as fluorescence imaging, provides a great potential solution to resolve the nanoscale thermal probing problem.

  15. Battery Thermal Characterization

    Energy Technology Data Exchange (ETDEWEB)

    Keyser, Matthew A [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-08

    The operating temperature is critical in achieving the right balance between performance, cost, and life for both Li-ion batteries and ultracapacitors. The chemistries of advanced energy-storage devices - such as lithium-based batteries - are very sensitive to operating temperature. High temperatures degrade batteries faster while low temperatures decrease their power and capacity, affecting vehicle range, performance, and cost. Understanding heat generation in battery systems - from the individual cells within a module, to the inter-connects between the cells, and across the entire battery system - is imperative for designing effective thermal-management systems and battery packs. At NREL, we have developed unique capabilities to measure the thermal properties of cells and evaluate thermal performance of battery packs (air or liquid cooled). We also use our electro-thermal finite element models to analyze the thermal performance of battery systems in order to aid battery developers with improved thermal designs. NREL's tools are used to meet the weight, life, cost, and volume goals set by the U.S. Department of Energy for electric drive vehicles.

  16. Local Thermal Insulating Materials For Thermal Energy Storage ...

    African Journals Online (AJOL)

    Thermal insulation is one of the most important components of a thermal energy storage system. In this paper the thermal properties of selected potential local materials which can be used for high temperature insulation are presented. Thermal properties of seven different samples were measured. Samples consisted of: ...

  17. Effects of water and sawdust additives on thermal effusivity, thermal ...

    African Journals Online (AJOL)

    The effects of water and sawdust additives on the thermal effusivity (e), thermal conductivity (λ), and durability of cement-stabilized laterites were investigated. The thermal effusivity (e) and conductivity(λ) have direct influ-ence on heat transfer and thermal insulation in buildings, and the parameters were determined by hot ...

  18. Thermal analysis and structural characterization of chitinous exoskeleton from two marine invertebrates

    Energy Technology Data Exchange (ETDEWEB)

    Juárez-de la Rosa, B.A., E-mail: balej05@yahoo.com.mx [Laboratory of Natural Polymers, CIAD – Coordinación Guaymas, Carretera al Varadero Nacional km. 6.6, Col. Las Playitas, 85480 Guaymas, Sonora (Mexico); Applied Physics Department, CINVESTAV-IPN Unidad Mérida, Carretera antigua a Progreso, km. 6. Apdo, Postal 73, Cordemex, 97310 Mérida, Yucatan (Mexico); May-Crespo, J.; Quintana-Owen, P.; Gónzalez-Gómez, W.S. [Applied Physics Department, CINVESTAV-IPN Unidad Mérida, Carretera antigua a Progreso, km. 6. Apdo, Postal 73, Cordemex, 97310 Mérida, Yucatan (Mexico); Yañez-Limón, J.M. [Materials and Engineering Science, CINVESTAV-IPN, Unidad Querétaro, Libramiento Norponiente No. 2000, Fracc. Real de Juriquilla, 76230 Santiago de Querétaro, Querétaro (Mexico); Alvarado-Gil, J.J., E-mail: jjag@mda.cinvestav.mx [Applied Physics Department, CINVESTAV-IPN Unidad Mérida, Carretera antigua a Progreso, km. 6. Apdo, Postal 73, Cordemex, 97310 Mérida, Yucatan (Mexico)

    2015-06-20

    Highlights: • Thermal analysis of exoskeletons: Antipathes caribbeana and Limulus polyphemus. • DMTA revealed Limulus has a stronger structure with a stepper glass transition. • DSC measurements exhibited a much larger water holding capacity in Antipathes. • X-ray diffraction analysis shows a higher crystallinity index in Limulus • FTIR showed α-chitin structures and high temperature C–N groups prevalence. - ABSTRACT: Thermomechanical and structural properties of two marine species exoskeletons, Antipathes caribbeana (black coral) and Limulus polyphemus (xiphosure), were studied using dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). DMTA curves indicate the viscoelastic behavior and glass transition around 255 °C, black coral presented a second transition (175 °C) associated to the acetamide group attached to the α-chitin chain. DSC measurements showed a endothermic peak around 100 °C, with enthalpies of 4.02 and 118.04 J/g, indicating strong differences between exoskeletons respect to their water holding capacity and strength water–polymer interaction. A comparative analysis involving DSC and X-ray diffraction showed that lower values ΔH in xiphosure correspond to a material with a higher crystallinity (30), in contrast black coral exhibits higher values ΔH and a lower crystallinity (19). FTIR confirmed α-chitin based structure, at higher temperature diminishes the amide bands and a new one appears, related to C–N groups.

  19. Thermal Properties of Oxides With Magnetoplumbite Structure for Advanced Thermal Barrier Coatings

    Science.gov (United States)

    Bansal, Narottam P.; Zhu, Dongming; Eslamloo-Grami, Maryam

    2007-01-01

    Oxides having magnetoplumbite structure are promising candidate materials for applications as high temperature thermal barrier coatings because of their high thermal stability, high thermal expansion, and low thermal conductivity. In this study, powders of LaMgAl11O19, GdMgAl11O19, SmMgAl11O19, and Gd0.7Yb0.3MgAl11O19 magnetoplumbite oxides were synthesized by citric acid sol-gel method and hot pressed into disk specimens. The thermal expansion coefficients (CTE) of these oxide materials were measured from room temperature to 1500 C. The average CTE value was found to be approx.9.6x10(exp -6)/C. Thermal conductivity of these magnetoplumbite-based oxide materials was also evaluated using steady-state laser heat flux test method. The effects of doping on thermal properties were also examined. Thermal conductivity of the doped Gd0.7Yb0.3MgAl11O19 composition was found to be lower than that of the undoped GdMgAl11O19. In contrast, thermal expansion coefficient was found to be independent of the oxide composition and appears to be controlled by the magnetoplumbite crystal structure. Thermal conductivity testing of LaMgAl11O19 and LaMnAl11O19 magnetoplumbite oxide coatings plasma sprayed on NiCrAlY/Rene N5 superalloy substrates indicated resistance of these coatings to sintering even at temperatures as high as 1600 C.

  20. Should researchers use single indicators, best indicators, or multiple indicators in structural equation models?

    Directory of Open Access Journals (Sweden)

    Hayduk Leslie A

    2012-10-01

    Full Text Available Abstract Background Structural equation modeling developed as a statistical melding of path analysis and factor analysis that obscured a fundamental tension between a factor preference for multiple indicators and path modeling’s openness to fewer indicators. Discussion Multiple indicators hamper theory by unnecessarily restricting the number of modeled latents. Using the few best indicators – possibly even the single best indicator of each latent – encourages development of theoretically sophisticated models. Additional latent variables permit stronger statistical control of potential confounders, and encourage detailed investigation of mediating causal mechanisms. Summary We recommend the use of the few best indicators. One or two indicators are often sufficient, but three indicators may occasionally be helpful. More than three indicators are rarely warranted because additional redundant indicators provide less research benefit than single indicators of additional latent variables. Scales created from multiple indicators can introduce additional problems, and are prone to being less desirable than either single or multiple indicators.

  1. Thermal and hydraulic analyses of the System 81 cold traps

    Energy Technology Data Exchange (ETDEWEB)

    Kim, K.

    1977-06-15

    Thermal and hydraulic analyses of the System 81 Type I and II cold traps were completed except for thermal transients analysis. Results are evaluated, discussed, and reported. Analytical models were developed to determine the physical dimensions of the cold traps and to predict the performance. The FFTF cold trap crystallizer performances were simulated using the thermal model. This simulation shows that the analytical model developed predicts reasonably conservative temperatures. Pressure drop and sodium residence time calculations indicate that the present design will meet the requirements specified in the E-Specification. Steady state temperature data for the critical regions were generated to assess the magnitude of the thermal stress.

  2. Microwave Thermal Propulsion

    Science.gov (United States)

    Parkin, Kevin L. G.; Lambot, Thomas

    2017-01-01

    We have conducted research in microwave thermal propulsion as part of the space exploration access technologies (SEAT) research program, a cooperative agreement (NNX09AF52A) between NASA and Carnegie Mellon University. The SEAT program commenced on the 19th of February 2009 and concluded on the 30th of September 2015. The DARPA/NASA Millimeter-wave Thermal Launch System (MTLS) project subsumed the SEAT program from May 2012 to March 2014 and one of us (Parkin) served as its principal investigator and chief engineer. The MTLS project had no final report of its own, so we have included the MTLS work in this report and incorporate its conclusions here. In the six years from 2009 until 2015 there has been significant progress in millimeter-wave thermal rocketry (a subset of microwave thermal rocketry), most of which has been made under the auspices of the SEAT and MTLS programs. This final report is intended for multiple audiences. For researchers, we present techniques that we have developed to simplify and quantify the performance of thermal rockets and their constituent technologies. For program managers, we detail the facilities that we have built and the outcomes of experiments that were conducted using them. We also include incomplete and unfruitful lines of research. For decision-makers, we introduce the millimeter-wave thermal rocket in historical context. Considering the economic significance of space launch, we present a brief but significant cost-benefit analysis, for the first time showing that there is a compelling economic case for replacing conventional rockets with millimeter-wave thermal rockets.

  3. Landsat and Thermal Infrared Imaging

    Science.gov (United States)

    Arvidson, Terry; Barsi, Julia; Jhabvala, Murzy; Reuter, Dennis

    2012-01-01

    The purpose of this chapter is to describe the collection of thermal images by Landsat sensors already on orbit and to introduce the new thermal sensor to be launched in 2013. The chapter describes the thematic mapper (TM) and enhanced thematic mapper plus (ETM+) sensors, the calibration of their thermal bands, and the design and prelaunch calibration of the new thermal infrared sensor (TIRS).

  4. Comparação das estimativas de prevalência de indicadores de saúde no Município de Campinas, São Paulo, Brasil, nos anos de 2001/2002 (ISA-SP e 2008/2009 (ISA-Camp Comparación de las estimaciones de prevalencia en los indicadores de salud en Campinas, São Paulo, Brasil, durante los años 2001/2002 (ISA-SP y 2008/2009 (ISA-Camp Comparison of prevalence estimates for health indicators in Campinas, São Paulo State, Brazil, in 2001-2002 (ISA-SP and 2008-2009 (ISA-Camp

    Directory of Open Access Journals (Sweden)

    Chester Luis Galvão César

    2013-06-01

    de los indicadores de salud, a través de encuestas repetidas en la misma población, puede facilitar el seguimiento de las metas y objetivos y contribuir a la planificación de acciones de salud.The aim of the study was to compare prevalence estimates of health indicators for adults living in Campinas, São Paulo State, using data from two household surveys (ISA-SP 2001-2002 and ISA-Camp 2008-2009, analyzing data from 941 and 2,637 individuals 18 years and older, respectively. Socio-demographic variables were used to characterize the study population. Prevalence rates and 95% confidence intervals were estimated, and comparisons were performed by prevalence ratios adjusted for sex, age, and education, obtained by Poisson regression with robust variance. Statistically significant differences were observed for prevalence of morbidity, medication, smoking, and lifetime Pap smear and mammogram. Surveillance of health indicators by repeated surveys in the same population can facilitate monitoring goals and objectives by providing support to plan public health interventions.

  5. Response of thermal ions to electromagnetic ion cyclotron waves

    Science.gov (United States)

    Anderson, B. J.; Fuselier, S. A.

    1994-01-01

    Electromagnetic ion cyclotron waves generated by 10 - 50 keV protons in the Earth's equatorial magnetosphere will interact with the ambient low-energy ions also found in this region. We examine H(+) and He(+) distribution functions from approx. equals 1 to 160 eV using the Hot Plasma Composition Experiment instrument on AMPTE/CCE to investigate the thermal ion response to the waves. A total of 48 intervals were chosen on the basis of electromagnetic ion cyclotron (EMIC) wave activity: 24 with prevalent EMIC waves and 24 with no EMIC waves observed on the orbit. There is a close correlation between EMIC waves and perpendicular heated ion distributions. For protons the perpendicular temperature increase is modest, about 5 eV, and is always observed at 90 deg pitch angles. This is consistent with a nonresonant interaction near the equator. By contrast, He(+) temperatures during EMIC wave events averaged 35 eV and sometimes exceeded 100 eV, indicating stronger interaction with the waves. Furthermore, heated He(+) ions have X-type distributions with maximum fluxes occurring at pitch angles intermediate between field-aligned and perpendicular directions. The X-type He(+) distributions are consistent with a gyroresonant interaction off the equator. The concentration of He(+) relative to H(+) is found to correlate with EMIC wave activity, but it is suggested that the preferential heating of He(+) accounts for the apparent increase in relative He(+) concentration by increasing the proportion of He(+) detected by the ion instrument.

  6. Teens' distracted driving behavior: Prevalence and predictors.

    Science.gov (United States)

    Gershon, Pnina; Zhu, Chunming; Klauer, Sheila G; Dingus, Tom; Simons-Morton, Bruce

    2017-12-01

    Teen drivers' over-involvement in crashes has been attributed to a variety of factors, including distracted driving. With the rapid development of in-vehicle systems and portable electronic devices, the burden associated with distracted driving is expected to increase. The current study identifies predictors of secondary task engagement among teenage drivers and provides basis for interventions to reduce distracted driving behavior. We described the prevalence of secondary tasks by type and driving conditions and evaluated the associations between the prevalence of secondary task engagement, driving conditions, and selected psychosocial factors. The private vehicles of 83 newly-licensed teenage drivers were equipped with Data Acquisition Systems (DAS), which documented driving performance measures, including secondary task engagement and driving environment characteristics. Surveys administered at licensure provided psychosocial measures. Overall, teens engaged in a potentially distracting secondary task in 58% of sampled road clips. The most prevalent types of secondary tasks were interaction with a passenger, talking/singing (no passenger), external distraction, and texting/dialing the cell phone. Secondary task engagement was more prevalent among those with primary vehicle access and when driving alone. Social norms, friends' risky driving behaviors, and parental limitations were significantly associated with secondary task prevalence. In contrast, environmental attributes, including lighting and road surface conditions, were not associated with teens' engagement in secondary tasks. Our findings indicated that teens engaged in secondary tasks frequently and poorly regulate their driving behavior relative to environmental conditions. Practical applications: Peer and parent influences on secondary task engagement provide valuable objectives for countermeasures to reduce distracted driving among teenage drivers. Copyright © 2017 National Safety Council and

  7. Values of Kp Indices, Ap Indices, Cp Indices, C9 Indices, Sunspot Number, and 10.7 cm Flux

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data file consists of Kp indices, Ap indices, Cp indices, C9 indices, sunspot number, and 10.7 cm flux. The most often requested parameter of this file are the...

  8. Comparison of antioxidants for combined radiation and thermal aging and superposition of radiation and thermal aging for EPR and XLPE

    Science.gov (United States)

    Reynolds, A. B.; Wlodkowski, P. A.

    Thermal and combined thermal and radiation aging of low voltage EPR and XLPE cable insulation with Agerite MA antioxidant and with the ZMTI/Aminox antioxidant system was examined to compare the relative effectiveness of the antioxidant and polymer systems. All provided significant stability with no clear choice of any particular combination being superior to the others. A comparison of degradation from thermal and radiation aging with degradation from combined thermal/radiation aging showed that the damage from the individual aging effects was superposable. This indicates that synergistic effects have little importance for the EPRs and XLPEs tested under the aging conditions observed.

  9. Direct thermal dyes

    Science.gov (United States)

    Ehlinger, Edward

    1990-07-01

    Direct thermal dyes are members of a class of compounds referred to in the imaging industry as color formers or leuco dyes. The oldest members of that class have simple triarylmethane structures, and have been employed for years in various dyeing applications. More complex triarylmethane compounds, such as phthalides and fluorans, are now used in various imaging systems to produce color. Color is derived from all of these compounds via the same mechanism, on a molecular level. That is, an event of activation produces a highly resonating cationic system whose interaction with incident light produces reflected light of a specific color. The activation event in the case of a direct thermal system is the creation of a melt on the paper involving dye and an acidic developer. The three major performance parameters in a thermal system are background color, image density, and image stability. The three major dye physical parameters affecting thermal performance are chemical constituency, purity, and particle size. Those dyes having the best combination of characteristics which can also be manufactured economically dominate the marketplace. Manufacturing high performance dyes for the thermal market involves multi-step, convergent reaction sequences performed on large scale. Intermediates must be manufactured at the right time, and at the right quality to be useful.

  10. Thermal Lens Microscope

    Science.gov (United States)

    Uchiyama, Kenji; Hibara, Akihide; Kimura, Hiroko; Sawada, Tsuguo; Kitamori, Takehiko

    2000-09-01

    We developed a novel laser microscope based on the thermal lens effect induced by a coaxial beam comprised of excitation and probe beams. The signal generation mechanism was confirmed to be an authentic thermal lens effect from the measurement of signal and phase dependences on optical configurations between the sample and the probe beam focus, and therefore, the thermal lens effect theory could be applied. Two-point spatial resolution was determined by the spot size of the excitation beam, not by the thermal diffusion length. Sensitivity was quite high, and the detection ability, evaluated using a submicron microparticle containing dye molecules, was 0.8 zmol/μm2, hence a distribution image of trace chemical species could be obtained quantitatively. In addition, analytes are not restricted to fluorescent species, therefore, the thermal lens microscope is a promising analytical microscope. A two-dimensional image of a histamine molecule distribution, which was produced in mast cells at the femtomole level in a human nasal mucous polyp, was obtained.

  11. Thermal Magnifier and Minifier

    Science.gov (United States)

    Shen, Xiang-Ying; Chen, Yi-Xuan; Huang, Ji-Ping

    2016-03-01

    For thermal conduction cases, one can detect the size of an object explicitly by measuring the temperature distribution around it. If the temperature is the only signature we can obtain, we will give an incorrect judgment on the shape or size of the object by disturbing the distribution of it. According to this principle, in this article, we develop a transformation method and design a dual-functional thermal device, which can create a thermal illusion that the object inside it “seems” to appear bigger or smaller than its original size. This device can functionally switch among magnifier and minifier at will. The proposed device consists of two layers: the cloak and the complementary material. A thermal cloak can make the internal region thermally “invisible” while the complementary layer offsets this effect. The combination leads to the illusion of magnification and minification. As a result of finite element simulations, the performances of the illusions are confirmed. Support by the National Natural Science Foundation of China under Grant No. 11222544, by the Fok Ying Tung Education Foundation under Grant No. 131008, by the Program for New Century Excellent Talents in University (NCET-12-0121), and by the Chinese National Key Basic Research Special Fund under Grant No. 2011CB922004

  12. Thermal surveillance of volcanoes

    Science.gov (United States)

    Friedman, J. D. (Principal Investigator)

    1972-01-01

    The author has identified the following significant results. A systematic aircraft program to monitor changes in the thermal emission from volcanoes of the Cascade Range has been initiated and is being carried out in conjunction with ERTS-1 thermal surveillance experiments. Night overflights by aircraft equipped with thermal infrared scanners sensitive to terrestrial emission in the 4-5.5 and 8-14 micron bands are currently being carried out at intervals of a few months. Preliminary results confirm that Mount Rainier, Mount Baker, Mount Saint Helens, Mount Shasta, and the Lassen area continue to be thermally active, although with the exception of Lassen which erupted between 1914 and 1917, and Mount Saint Helens which had a series of eruptions between 1831 and 1834, there has been no recent eruptive activity. Excellent quality infrared images recorded over Mount Rainier, as recently as April, 1972, show similar thermal patterns to those reported in 1964-1966. Infrared images of Mount Baker recorded in November 1970 and again in April 1972 revealed a distinct array of anomalies 1000 feet below the crater rim and associated with fumaroles or structures permitting convective heat transfer to the surface.

  13. Indications for Blood Transfusion among Children in a Tertiary ...

    African Journals Online (AJOL)

    Background: Anaemia is prevalent among children in our environment, often necessitating blood transfusions. Knowledge of the common reasons for blood transfusion and institution of preventive measures is likely to reduce transfusion rate in the region. We undertook a review of indications for blood transfusion in children ...

  14. Erythrocyte indices of iron status in children with cyanotic congenital ...

    African Journals Online (AJOL)

    Background Iron (Fe) deficiency is a known feature of cyanotic congenital heart disease (CCHD) and may worsen symptoms. The prevalence of iron deficiency among children with CCHD at the University College Hospital (UCH), Ibadan is unknown. Erythrocyte indices of iron status are easier and less expensive to ...

  15. Indications, Complications and Mortality of Nephrectomy in Tikur ...

    African Journals Online (AJOL)

    Background: Nephrectomy is a standard therapeutic urological procedure for malignancy of kidneys and upper urinary tract, and for damaged kidneys with little or no contribution to the overall renal function. There are geographical variations in indications for nephrectomy as certain urological diseases are more prevalent in ...

  16. Thermal turbulent convection: thermal plumes and fluctuations

    International Nuclear Information System (INIS)

    Gibert, M.

    2007-10-01

    In this study we investigate the phenomenon of thermal turbulent convection in new and unprecedented ways. The first system we studied experimentally is an infinite vertical channel, where a constant vertical mean gradient of temperature exists. Inside this channel the average mass flux is null. The results obtained from our measurements reveal that the flow is mainly inertial; indeed the dissipative coefficients (here the viscosity) play a role only to define a coherence length L. This length is the distance over which the thermal plumes can be considered as 'free falling' objects. The horizontal transport, of heat and momentum, is entirely due to fluctuations. The associated 'mixing length' is small compared to the channel width. In the other hand, the vertical heat transport is due to coherent structures: the heat plumes. Those objects were also investigated in a Lagrangian study of the flow in the bulk of a Rayleigh-Benard cell. The probe, which has the same density as the fluid used in this experiment, is a sphere of 2 cm in diameter with embarked thermometers and radio-emitter. The heat plumes transport it, which allows a statistical study of such objects. (author)

  17. Holographic thermalization in noncommutative geometry

    Directory of Open Access Journals (Sweden)

    Xiao-Xiong Zeng

    2015-05-01

    Full Text Available Gravitational collapse of a shell of dust in noncommutative geometry is probed by the renormalized geodesic length, which is dual to probe the thermalization by the two-point correlation function in the dual conformal field theory. We find that the larger the noncommutative parameter is, the longer the thermalization time is, which implies that the large noncommutative parameter delays the thermalization process. We also investigate how the noncommutative parameter affects the thermalization velocity and thermalization acceleration.

  18. Article for thermal energy storage

    Science.gov (United States)

    Salyer, Ival O.

    2000-06-27

    A thermal energy storage composition is provided which is in the form of a gel. The composition includes a phase change material and silica particles, where the phase change material may comprise a linear alkyl hydrocarbon, water/urea, or water. The thermal energy storage composition has a high thermal conductivity, high thermal energy storage, and may be used in a variety of applications such as in thermal shipping containers and gel packs.

  19. Prevalence of schizophrenia: recent developments

    African Journals Online (AJOL)

    The long held view that schizophrenia affects about 1% of the population has been shown to be an overestimate and in fact derived from incorrect data.1 Also, for many years, it was believed that the prevalence of schizophrenia varied little between sites.2,3 It is in fact the case that the estimates of the prevalence of ...

  20. Prevalence of COPD in Copenhagen

    DEFF Research Database (Denmark)

    Fabricius, Peder; Løkke, Anders; Marott, Jacob Louis

    2011-01-01

    INTRODUCTION: COPD is a leading cause of death worldwide; however, prevalence estimates have varied considerably in previous studies. This study aimed to determine the prevalence and severity of COPD in Copenhagen using data from the 4th examination of The Copenhagen City Heart Study, to investig...

  1. Prevalence of COPD in Copenhagen

    DEFF Research Database (Denmark)

    Fabricius, Peder; Løkke, Anders; Marott, Jacob Louis

    2011-01-01

    COPD is a leading cause of death worldwide; however, prevalence estimates have varied considerably in previous studies. This study aimed to determine the prevalence and severity of COPD in Copenhagen using data from the 4th examination of The Copenhagen City Heart Study, to investigate...

  2. OBSERVED ASTEROID SURFACE AREA IN THE THERMAL INFRARED

    Energy Technology Data Exchange (ETDEWEB)

    Nugent, C. R. [Infrared Processing and Analysis Center, California Institute of Technology, Pasadena, CA 91125 (United States); Mainzer, A.; Masiero, J.; Bauer, J.; Kramer, E.; Sonnett, S. [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States); Wright, E. L. [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States); Grav, T. [Planetary Science Institute, Tucson, AZ (United States)

    2017-02-01

    The rapid accumulation of thermal infrared observations and shape models of asteroids has led to increased interest in thermophysical modeling. Most of these infrared observations are unresolved. We consider what fraction of an asteroid’s surface area contributes the bulk of the emitted thermal flux for two model asteroids of different shapes over a range of thermal parameters. The resulting observed surface in the infrared is generally more fragmented than the area observed in visible wavelengths, indicating high sensitivity to shape. For objects with low values of the thermal parameter, small fractions of the surface contribute the majority of thermally emitted flux. Calculating observed areas could enable the production of spatially resolved thermal inertia maps from non-resolved observations of asteroids.

  3. Thermal Properties of Asphalt Mixtures Modified with Conductive Fillers

    Directory of Open Access Journals (Sweden)

    Byong Chol Bai

    2015-01-01

    Full Text Available This paper investigates the thermal properties of asphalt mixtures modified with conductive fillers used for snow melting and solar harvesting pavements. Two different mixing processes were adopted to mold asphalt mixtures, dry- and wet-mixing, and two conductive fillers were used in this study, graphite and carbon black. The thermal conductivity was compared to investigate the effects of asphalt mixture preparing methods, the quantity, and the distribution of conductive filler on thermal properties. The combination of conductive filler with carbon fiber in asphalt mixture was evaluated. Also, rheological properties of modified asphalt binders with conductive fillers were measured using dynamic shear rheometer and bending beam rheometer at grade-specific temperatures. Based on rheological testing, the conductive fillers improve rutting resistance and decrease thermal cracking resistance. Thermal testing indicated that graphite and carbon black improve the thermal properties of asphalt mixes and the combined conductive fillers are more effective than the single filler.

  4. Thermal conductivity of disordered two-dimensional binary alloys.

    Science.gov (United States)

    Zhou, Yang; Guo, Zhi-Xin; Cao, Hai-Yuan; Chen, Shi-You; Xiang, Hong-Jun; Gong, Xin-Gao

    2016-10-20

    Using non-equilibrium molecular dynamics simulations, we have studied the effect of disorder on the thermal conductivity of two-dimensional (2D) C 1-x N x alloys. We find that the thermal conductivity not only depends on the substitution concentration of nitrogen, but also strongly depends on the disorder distribution. A general linear relationship is revealed between the thermal conductivity and the participation ratio of phonons in 2D alloys. Localization mode analysis further indicates that the thermal conductivity variation in the ordered alloys can be attributed to the number of inequivalent atoms. As for the disordered alloys, we find that the thermal conductivity variation can be described by a simple linear formula with the disorder degree and the substitution concentration. The present study suggests some general guidance for phonon manipulation and thermal engineering in low dimensional alloys.

  5. Thermal transport properties of antimonene: an ab initio study.

    Science.gov (United States)

    Wang, Shudong; Wang, Wenhua; Zhao, Guojun

    2016-11-16

    Searching for low thermal conductivity materials is crucial for thermoelectric devices. Here we report on the phonon transport properties of recently fabricated single layer antimony, antimonene [Ares, et al., Adv. Mater., 2016, 28, 6332]. Ab initio calculations in combination with the Boltzmann transport equation (BTE) for phonons show that antimonene has a low lattice thermal conductivity (15.1 W m -1 K -1 at 300 K), indicating its potential thermoelectric applications. The low lattice thermal conductivity is due to its small group velocity, low Debye temperature and large buckling height. We also investigate in detail the mode contributions to total thermal conductivity and find at low frequency that the longitudinal acoustic (LA) branch dominates the thermal conductivity. Moreover, we show that the lattice thermal conductivity of antimonene can further be reduced by minimizing the sample size. Our findings open the field for thermoelectric applications based on antimonene.

  6. Factors affecting thermal infrared images at selected field sites

    International Nuclear Information System (INIS)

    Sisson, J.B.; Ferguson, J.S.

    1993-07-01

    A thermal infrared (TIR) survey was conducted to locate surface ordnance in and around the Naval Ordnance Disposal Area, and a thermal anomaly was found. This report documents studies conducted to identify the position of cause of the thermal anomaly. Also included are results of a long path Fourier transform infrared survey, soil sampling activities, soil gas surveys, and buried heater studies. The results of these studies indicated that the thermal anomaly was caused by a gravel pad, which had thermal properties different than those of the surrounding soil. Results from this investigation suggest that TIR is useful for locating surface objects having a high thermal inertia compared to the surrounding terrain, but TIR is of very limited use for characterizing buried waste or other similar buried objects at the INEL

  7. The effects of thermal cycling on the thermal deformation of graphite-polyimide

    Science.gov (United States)

    Hyer, M. W.; Hagaman, J. A.

    1979-01-01

    The effects of repetitive thermal cycling on the thermal deformation of graphite-fiber-reinforced polyimide laminates are investigated. Unsymmetric and unidirectional laminate specimens were cycled in an oven between room temperature and 180 or 315 C five times, and temperature and deformation were recorded as a function of time in order to measure thermal deformation. The results of the lower temperature cycling reveal a hysteresis-like effect in the temperature-thermal deformation relation for a single cycle, while no differences are detected from one cycle to the next. The response of an eight-layer curved specimen is found to agree well with predictions based on a piecewise-linear lamination theory, however, four-layer laminate response could not be explained. The results of the high-temperature tests also indicate a dependence of the strain on whether the specimen was being heated or cooled, however quantitative results are considered unreliable, due to strain gage difficulties.

  8. Prevalence of Food Additive Intolerance

    DEFF Research Database (Denmark)

    Madsen, Charlotte Bernhard

    1994-01-01

    1 The existing prevalence estimates of food additive intolerance(1-4) are being reviewed. 2 In the EEC report the estimated frequency of food additive intolerance is 0.03% to 0.15% based on data from patient groups. 3 The British population study results in a prevalence estimate of 0...... The prevalence estimates vary with a factor 100. As the results vary so do the study populations. 6 If the different study populations are accounted for, a common conclusion can be drawn: Food additive intolerance is found in adults with atopic symptoms from the respiratory tract and skin. The prevalence...... estimates are questionable but may be less than 0.15%. In adults and children with reproducible, and with more subjective symptoms, such as headache and behavioural/mood change the prevalence is even lower (0.026%). Food additive intolerance is primarily found in atopic children with cutaneous symptoms...

  9. How prevalent is 'food addiction'?

    Directory of Open Access Journals (Sweden)

    Adrian eMeule

    2011-11-01

    Full Text Available Increasing evidence suggests that binge eating-related disorders could be related to addiction-like eating patterns due to the addictive potential of hyperpalatable foods. Subsequently, important implications have been derived for treatment of those disorders and even political actions. However, studies on the prevalence of food addiction are rare. Few recent studies investigated addictive eating in children, adolescents, and adults. This mini-review presents these first attempts to assess addictive eating and how prevalent addictive eating patterns were in the respective studies. It is concluded that the prevalence of food addiction is increased in obese individuals and even more so in obese patients with binge eating disorder. However, prevalence of food addiction is not sufficient to account for the obesity epidemic. Conversely, an arguably high prevalence of food addiction can also be found in under-, normal-, and overweight individuals. Future studies may investigate which factors are associated with addictive eating in non-obese individuals.

  10. Comparison of mechanical fatigue with thermal fatigue in ceramics

    International Nuclear Information System (INIS)

    Wilson, B.A.; Case, E.D.

    1993-01-01

    Thermal fatigue studies have shown a saturation of damage accumulation with cycling. Similar damage saturation has been observed for mechanical fatigue. This study compares damage saturation behavior for mechanical fatigue with thermal fatigue in ceramics. Studies of thermal fatigue of ceramics show that the accumulation of thermal shock cycling damage depends on the magnitude of the thermal shock, ΔΤ (where ΔΤ is the temperature change of the specimen from the initial temperature to the temperature of the quenching medium). Three distinct regimes of damage accumulation exist depending on the magnitude of ΔΤ. For the first regime where the thermal shock cycling is below ΔΤ c , a critical thermal shock value, there is no thermal damage detected. In the second regime where ΔΤ is higher than ΔΤ c but lower than ΔΤ 1 , the accumulating microcrack damage initially induces a rapid change in material property P. As the number of cycles increases a steady state value of properties is reached. For the third regime ΔΤ is higher than ΔΤ 1 and rapid crack growth results in fracture of the specimen. Each regime depends on ΔΤ since, for a given specimen and quenching medium, the maximum thermal shock stress is proportional to ΔΤ. So characterization of each regime by ΔΤ is indicative of the maximum stress applied by the thermal shock

  11. Assessment of nursing care using indicators generated by software

    OpenAIRE

    Lima,Ana Paula Souza; Chianca,Tânia Couto Machado; Tannure,Meire Chucre

    2015-01-01

    OBJECTIVE: to analyze the efficacy of the Nursing Process in an Intensive Care Unit using indicators generated by software. METHOD: cross-sectional study using data collected for four months. RNs and students daily registered patients, took history (at admission), performed physical assessments, and established nursing diagnoses, nursing plans/prescriptions, and assessed care delivered to 17 patients using software. Indicators concerning the incidence and prevalence of nursing diagnoses, rate...

  12. Electrical and Thermal Conductivity

    Science.gov (United States)

    Ventura, Guglielmo; Perfetti, Mauro

    After a Sect. 1.1 devoted to electrical conductivity and a section that deals with magnetic and dielectric losses ( 1.2 ), this chapter explores the theory of thermal conduction in solids. The examined categories of solids are: metals Sect. 1.3.2 , Dielectrics Sects. 1.3.3 and 1.3.4 and Nanocomposites Sect. 1.3.5 . In Sect. 1.3.6 the problem of thermal and electrical contact between materials is considered because contact resistance occurring at conductor joints in magnets or other high power applications can lead to undesirable electrical losses. At low temperature, thermal contact is also critical in the mounting of temperature sensors, where bad contacts can lead to erroneous results, in particular when superconductivity phenomena are involved.

  13. Thermal stress and seismogenesis

    International Nuclear Information System (INIS)

    Zhou Huilan; Wei Dongping

    1989-05-01

    In this paper, the Fourier stress method was applied to deal with the problem of plane thermal stress, and a computing formula was given. As an example, we set up a variate temperature field to describe the uplifted upper mantle in Bozhong area of China, and the computing results shows that the maximum value of thermal plane shear stress is up to nearly 7x10 7 P α in two regions of this area. Since the Bohai earthquake (18 July, 1969, M s = 7.4) occurred at the edge of one of them and Tangshan earthquake (28 July, 1976, M s = 7.8) within another, their occurrences can be related reasonably to the thermal stress. (author). 15 refs, 7 figs

  14. Thermally actuated linkage arrangement

    International Nuclear Information System (INIS)

    Anderson, P.M.

    1981-01-01

    A reusable thermally actuated linkage arrangement includes a first link member having a longitudinal bore therein adapted to receive at least a portion of a second link member therein, the first and second members being sized to effect an interference fit preventing relative movement there-between at a temperature below a predetermined temperature. The link members have different coefficients of thermal expansion so that when the linkage is selectively heated by heating element to a temperature above the predetermined temperature, relative longitudinal and/or rotational movement between the first and second link members is enabled. Two embodiments of a thermally activated linkage are disclosed which find particular application in actuators for a grapple head positioning arm in a nuclear reactor fuel handling mechanism to facilitate back-up safety retraction of the grapple head independently from the primary fuel handling mechanism drive system. (author)

  15. Thermal Responsive Envelope

    DEFF Research Database (Denmark)

    Foged, Isak Worre; Pasold, Anke

    2015-01-01

    The paper presents an architectural computational method and model, which, through additive and subtractive processes, create composite elements with bending behaviour based on thermal variations in the surrounding climatic environment. The present effort is focused on the manipulation of assembly...... composite layers and their relative layer lengths thereby embedding the merged material effect to create a responsive behavioural architectural envelope. Copper and polypropylene are used as base materials for the composite structure due to their high differences in thermal expansion, surface emissivity...... alterations, their respective durability and copper’s architectural (visual and transformative) aesthetic qualities. Through the use of an evolutionary solver, the composite structure of the elements are organised to find the bending behaviour specified by and for the thermal environments. The entire model...

  16. Concepts in Thermal Physics

    CERN Document Server

    Blundell, Stephen J

    2006-01-01

    This modern introduction to thermal physics contains a step-by-step presentation of the key concepts. The text is copiously illustrated and each chapter contains several worked examples. - ;An understanding of thermal physics is crucial to much of modern physics, chemistry and engineering. This book provides a modern introduction to the main principles that are foundational to thermal physics, thermodynamics, and statistical mechanics. The key concepts are carefully presented in a clear way, and new ideas are illustrated with copious worked examples as well as a description of the historical background to their discovery. Applications are presented to subjects as. diverse as stellar astrophysics, information and communication theory, condensed matter physics, and climate change. Each chapter concludes with detailed exercises. -

  17. Prevalence of ataxia in children

    Science.gov (United States)

    Stoyanov, Cristina T.; Marasigan, Rhul; Jenkins, Mary E.; Konczak, Jürgen; Morton, Susanne M.; Bastian, Amy J.

    2014-01-01

    Objective: To estimate the prevalence of childhood ataxia resulting from both genetic and acquired causes. Methods: A systematic review was conducted following the PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-analyses) statement. Five databases were searched for articles reporting a frequency measure (e.g., prevalence, incidence) of ataxia in children. Included articles were first grouped according to the World Health Organization (WHO) regions and subsequently classified according to etiology (genetic, acquired, or mixed). Each article was assessed for its risk of bias on the domains of sampling, measurement, and analysis. Incidence values were converted to prevalence estimates whenever possible. European prevalence estimates for different etiologies of ataxia were summed to gauge the overall prevalence of childhood ataxia. Results: One hundred fifteen articles were included in the review. More than 50% of the data originated from the Europe WHO region. Data from this region also showed the least susceptibility to bias. Little data were available for Africa and Southeast Asia. The prevalence of acquired ataxias was found to vary more greatly across regions than the genetic ataxias. Ataxic cerebral palsy was found to be a significant contributor to the overall prevalence of childhood ataxia across WHO regions. The prevalence of childhood ataxias in Europe was estimated to be ∼26/100,000 children and likely reflects a minimum prevalence worldwide. Conclusions: The findings show that ataxia is a common childhood motor disorder with a higher prevalence than previously assumed. More research concerning the epidemiology, assessment, and treatment of childhood ataxia is warranted. PMID:24285620

  18. Determination of thermal conductivity from specific heat and thermal diffusivity measurements of plasma-sprayed cermets

    International Nuclear Information System (INIS)

    Roth, E.P.; Smith, M.F.

    1986-01-01

    The thermal conductivities of three plasma-sprayed cermets have been determined over the temperature range 23-630 degrees C from the measurement of the specific heat, thermal diffusivity, and density. These cermets are mixtures of Al and SiC prepared by plasma spray deposition and are being considered for various applications in magnetic confinement fusion devices. The samples consisted of three compositions: 61 vol% Al/39 vol% SiC, 74 vol% Al/26 vol% SiC, and 83 vol% Al/17 vol% SiC. The specific heat was determined by differential scanning calorimetry through the Al melt transition up to 720 0 C, while the thermal diffusivity was determined using the laser flash technique up to 630 0 C. The linear thermal expansion was measured and used to correct the diffusivity and density values. The thermal diffusivity showed a significant increase after thermal cycling due to a reduction in the intergrain contact resistance, increasing from 0.4 to 0.6 cm /SUP 2./ S -1 at 160 0 C. However, effective medium theory calculations indicated that the thermal conductivities of both the Al and the SiC were below the ideal defect-free limit even after high-temperature cycling. The specific heat measurements showed suppressed melting points in the plasmasprayed cermets. The 39 vol% SiC began a melt endotherm at 577 0 C, which peaked in the 640-650 0 C range depending on the sample thermal history. Chemical and X-ray diffraction analysis indicated the presence of free silicon in the cermet and in the SiC powder, which resulted in a eutectic Al/Si alloy

  19. Thermal energy storage material

    Science.gov (United States)

    Leifer, Leslie

    1976-01-01

    A thermal energy storage material which is stable at atmospheric temperature and pressure and has a melting point higher than 32.degree.F. is prepared by dissolving a specific class of clathrate forming compounds, such as tetra n-propyl or tetra n-butyl ammonium fluoride, in water to form a substantially solid clathrate. The resultant thermal energy storage material is capable of absorbing heat from or releasing heat to a given region as it transforms between solid and liquid states in response to temperature changes in the region above and below its melting point.

  20. Thermal Anemometry Grid Sensor.

    Science.gov (United States)

    Arlit, Martin; Schleicher, Eckhard; Hampel, Uwe

    2017-07-19

    A novel thermal anemometry grid sensor was developed for the simultaneous measurement of cross-sectional temperature and axial velocity distribution in a fluid flow. The sensor consists of a set of platinum resistors arranged in a regular grid. Each platinum resistor allows the simultaneous measurement of fluid temperature via electrical resistance and flow velocity via constant voltage thermal anemometry. Cross-sectional measurement was enabled by applying a special multiplexing-excitation scheme. In this paper, we present the design and characterization of a prototypical sensor for measurements in a range of very low velocities.

  1. Thermal test options

    International Nuclear Information System (INIS)

    Koski, J.A.; Keltner, N.R.; Sobolik, K.B.

    1993-02-01

    Shipping containers for radioactive materials must be qualified to meet a thermal accident environment specified in regulations, such at Title 10, Code of Federal Regulations, Part 71. Aimed primarily at the shipping container design, this report discusses the thermal testing options available for meeting the regulatory requirements, and states the advantages and disadvantages of each approach. The principal options considered are testing with radiant heat, furnaces, and open pool fires. The report also identifies some of the facilities available and current contacts. Finally, the report makes some recommendations on the appropriate use of these different testing methods

  2. Thermal Nanosystems and Nanomaterials

    CERN Document Server

    Volz, Sebastian

    2009-01-01

    Heat transfer laws for conduction, radiation and convection change when the dimensions of the systems in question shrink. The altered behaviours can be used efficiently in energy conversion, respectively bio- and high-performance materials to control microelectronic devices. To understand and model those thermal mechanisms, specific metrologies have to be established. This book provides an overview of actual devices and materials involving micro-nanoscale heat transfer mechanisms. These are clearly explained and exemplified by a large spectrum of relevant physical models, while the most advanced nanoscale thermal metrologies are presented.

  3. Thermal and nonthermal motions in dense cores

    Energy Technology Data Exchange (ETDEWEB)

    Myers, P.C.; Ladd, E.F.; Fuller, G.A. (Harvard-Smithsonian Center for Astrophysics, Cambridge, MA (USA))

    1991-05-01

    Kinetic temperature and NH3 line width data for 61 dense cores with embedded IRAS sources show that the nonthermal component of the core motions increases with source luminosity more rapidly than does the thermal component. The trends cross in the luminosity range 7-22 solar luminosities, which divides the regimes of thermal and nonthermal motions. Maps of line widths in dense cores and their surrounding clouds indicate that nonthermal line broadening is due not only to stellar winds, but also to gas properties independent of the star. The 'initial conditions' for motions in cores forming lower-mass stars are primarily thermal, while those in cores forming higher mass stars are probably primarily nonthermal. These differences in core properties may arise from differences in the relative proportion of magnetic and gravitational energy in the condensing core. 30 refs.

  4. Thermal response in van der Waals heterostructures

    KAUST Repository

    Gandi, Appala

    2016-11-21

    We solve numerically the Boltzmann transport equations of the phonons and electrons to understand the thermoelectric response in heterostructures of M2CO2 (M: Ti, Zr, Hf) MXenes with transition metal dichalcogenide monolayers. Low frequency optical phonons are found to occur as a consequence of the van der Waals bonding, contribute significantly to the thermal transport, and compensate for the reduced contributions of the acoustic phonons (increased scattering cross-sections in heterostructures), such that the thermal conductivities turn out to be similar to those of the bare MXenes. Our results indicate that the important superlattice design approach of thermoelectrics (to reduce the thermal conductivity) may be effective for two-dimensional van der Waals materials when used in conjunction with intercalation. © 2016 IOP Publishing Ltd.

  5. Anisotropic thermal expansion in flexible materials

    Science.gov (United States)

    Romao, Carl P.

    2017-10-01

    A definition of the Grüneisen parameters for anisotropic materials is derived based on the response of phonon frequencies to uniaxial stress perturbations. This Grüneisen model relates the thermal expansion in a given direction (αi i) to one element of the elastic compliance tensor, which corresponds to the Young's modulus in that direction (Yi i). The model is tested through ab initio prediction of thermal expansion in zinc, graphite, and calcite using density functional perturbation theory, indicating that it could lead to increased accuracy for structurally complex systems. The direct dependence of αi i on Yi i suggests that materials which are flexible along their principal axes but rigid in other directions will generally display both positive and negative thermal expansion.

  6. Thermal conductivity at different humidity conditions

    DEFF Research Database (Denmark)

    Kristiansen, Finn Harken; Rode, Carsten

    1999-01-01

    The thermal conductivity (the l-value) of several alternative insulation products and a traditional product is determined under different humidity conditions in a specially constructed hot plate apparatus.The hot plate apparatus is constructed with an air gap on each side of the test specimen where...... humidified air can pass. Thus, it is possible to build up different degrees of moisture on each side of the test specimen.The thermal conductivity is determined for the following types of alternative insulation: sheep's wool, flax, paper insulation, perlite and mineral wool. The insulation products were......, with and without affection of moisture, which were 0-20% higher than expected for the materials used. The measurements of the existing investigation should therefore not be considered giving real absolute values of the thermal conductivity. They can, however, indicate the relative significance of the moisture...

  7. Integration of thermal energy and seawater desalination

    Energy Technology Data Exchange (ETDEWEB)

    Deng, Runya; Lin, Hu [Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100080 (China); Graduate School of Chinese Academy of Sciences, Beijing 100039 (China); Xie, Lixin; Liu, Jie [School of Chemical Engineering and technology, Tianjin University, Tianjin 300072 (China); Han, Wei [Institute of Engineering Thermophysics, Chinese Academy of Sciences, Beijing 100080 (China)

    2010-11-15

    Energy and freshwater shortage are the bottlenecks restricting China's economic development. The integration of energy utilization system and seawater desalination is considered as an innovative technology enabling efficient simultaneous use of middle or low temperature thermal energy and supply freshwater. Three feasible approaches to integrate seawater desalination with energy utilization system are presented in this paper, including combinations of the desalination process with a Combined Cooling Heating and Power system (CCHP), a power plant, or a solar thermal utilization system. In addition, the feasibility and advantages of a seawater desalination system combined with a power plant are described. The findings indicate that combining seawater desalination with industrial processes is a feasible and promising way to solve the problems of the lack of freshwater and low efficient use of low temperature thermal energy in coastland areas. (author)

  8. Thermal management for LED applications

    CERN Document Server

    Poppe, András

    2014-01-01

    Thermal Management for LED Applications provides state-of-the-art information on recent developments in thermal management as it relates to LEDs and LED-based systems and their applications. Coverage begins with an overview of the basics of thermal management including thermal design for LEDs, thermal characterization and testing of LEDs, and issues related to failure mechanisms and reliability and performance in harsh environments. Advances and recent developments in thermal management round out the book with discussions on advances in TIMs (thermal interface materials) for LED applications, advances in forced convection cooling of LEDs, and advances in heat sinks for LED assemblies. This book also: Presents a comprehensive overview of the basics of thermal management as it relates to LEDs and LED-based systems Discusses both design and thermal management considerations when manufacturing LEDs and LED-based systems Covers reliability and performance of LEDs in harsh environments Has a hands-on applications a...

  9. Shape memory thermal conduction switch

    Science.gov (United States)

    Vaidyanathan, Rajan (Inventor); Krishnan, Vinu (Inventor); Notardonato, William U. (Inventor)

    2010-01-01

    A thermal conduction switch includes a thermally-conductive first member having a first thermal contacting structure for securing the first member as a stationary member to a thermally regulated body or a body requiring thermal regulation. A movable thermally-conductive second member has a second thermal contacting surface. A thermally conductive coupler is interposed between the first member and the second member for thermally coupling the first member to the second member. At least one control spring is coupled between the first member and the second member. The control spring includes a NiTiFe comprising shape memory (SM) material that provides a phase change temperature <273 K, a transformation range <40 K, and a hysteresis of <10 K. A bias spring is between the first member and the second member. At the phase change the switch provides a distance change (displacement) between first and second member by at least 1 mm, such as 2 to 4 mm.

  10. Shallow Drilling In The Salton Sea Region, The Thermal Anomaly

    Energy Technology Data Exchange (ETDEWEB)

    Newmark, R. L.; Kasameyer, P. W.; Younker, L. W.

    1987-01-01

    During two shallow thermal drilling programs, thermal measurements were obtained in 56 shallow (76.2 m) and one intermediate (457.3 m) depth holes located both onshore and offshore along the southern margin of the Salton Sea in the Imperial Valley, California. These data complete the surficial coverage of the thermal anomaly, revealing the shape and lateral extent of the hydrothermal system. The thermal data show the region of high thermal gradients to extend only a short distance offshore to the north of the Quaternary volcanic domes which are exposed along the southern shore of the Salton Sea. The thermal anomaly has an arcuate shape, about 4 km wide and 12 km long. Across the center of the anomaly, the transition zone between locations exhibiting high thermal gradients and those exhibiting regional thermal gradients is quite narrow. Thermal gradients rise from near regional (0.09 C/m) to extreme (0.83 C/m) in only 2.4 km. The heat flow in the central part of the anomaly is >600 mW/m{sup 2} and in some areas exceeds 1200 mW/m{sup 2}. The shape of the thermal anomaly is asymmetric with respect to the line of volcanoes previously thought to represent the center of the field, with its center line offset south of the volcanic buttes. There is no broad thermal anomaly associated with the magnetic high that extends offshore to the northeast from the volcanic domes. These observations of the thermal anomaly provide important constraints for models of the circulation of the hydrothermal system. Thermal budgets based on a simple model for this hydrothermal system indicate that the heat influx rate for local ''hot spots'' in the region may be large enough to account for the rate of heat flux from the entire Salton Trough.

  11. Edible Acid-Base Indicators.

    Science.gov (United States)

    Mebane, Robert C.; Rybolt, Thomas R.

    1985-01-01

    Reports on the colors observed during titrations of 15 natural indicators obtained from common fruits and vegetables. These edible indicators can be used for a variety of teacher demonstrations or for simple student experiments. (JN)

  12. Indicators of sustainable urban mobility

    OpenAIRE

    Вороніна, Роксолана; Маргіта, Наталія

    2015-01-01

    The article describes indicators of urban mobility. Problems of transport demand are discussed. Traffic planning and integrated urban planning in accordance with sustainable development and improving urban mobility are analyzed. Sustainable urban mobility indicator characteristics are presented.

  13. Thermal Reactor Safety

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    Information is presented concerning fire risk and protection; transient thermal-hydraulic analysis and experiments; class 9 accidents and containment; diagnostics and in-service inspection; risk and cost comparison of alternative electric energy sources; fuel behavior and experiments on core cooling in LOCAs; reactor event reporting analysis; equipment qualification; post facts analysis of the TMI-2 accident; and computational methods.

  14. Thermal Reactor Safety

    International Nuclear Information System (INIS)

    1980-06-01

    Information is presented concerning fire risk and protection; transient thermal-hydraulic analysis and experiments; class 9 accidents and containment; diagnostics and in-service inspection; risk and cost comparison of alternative electric energy sources; fuel behavior and experiments on core cooling in LOCAs; reactor event reporting analysis; equipment qualification; post facts analysis of the TMI-2 accident; and computational methods

  15. Ocean Thermal Energy.

    Science.gov (United States)

    Berkovsky, Boris

    1987-01-01

    Describes Ocean Thermal Energy Conservation (OTEC) as a method for exploiting the temperature difference between warm surface waters of the sea and its cold depths. Argues for full-scale demonstrations of the technique for producing energy for coastal regions. (TW)

  16. Next generation thermal imaging

    International Nuclear Information System (INIS)

    Marche, P.P.

    1988-01-01

    The best design of high performance thermal imagers for the 1990s will use horizontal quasi-linear arrays with focal plane processing associated with a simple vertical mechanical scanner. These imagers will have performance that is greatly improved compared to that of present-day devices (50 to 100 percent range and resolution improvement). 5 references

  17. Solar thermal barometer

    International Nuclear Information System (INIS)

    Anon.

    2010-01-01

    In 2008, the European solar thermal market put on a strong spurt only to mark time in 2009 with about 4.2 million m 2 installed, which is 450000 m 2 less year-on-year. The main reasons of the decrease is the financial crisis and the low oil price, other reasons more specific to the country exist, for instance the property crisis has dragged the Spanish market down. In 2009, the solar thermal collector surface area in service in the European Union is of the magnitude of 32.6 million m 2 , equivalent to a capacity of 22.8 GWTh. The solar thermal sector is one of the renewable sectors that creates the highest number of jobs and wealth, partly because the vast majority of the system components sold in Europe are produced in Europe and partly because the sale, installation fitting and maintenance are labour-intensive. In 2009, there were 50000 direct or indirect jobs in the European solar thermal sector. The main European actors in this sector are GREENoneTEC, Bosch-Thermotechnik, Viessmann, Vaillant and Solvis. No clear recovery is expected before 2011. (A.C.)

  18. Thermal Cameras and Applications

    DEFF Research Database (Denmark)

    Gade, Rikke; Moeslund, Thomas B.

    2014-01-01

    Thermal cameras are passive sensors that capture the infrared radiation emitted by all objects with a temperature above absolute zero. This type of camera was originally developed as a surveillance and night vision tool for the military, but recently the price has dropped, significantly opening up...

  19. Solar Thermal Power.

    Science.gov (United States)

    McDaniels, David K.

    The different approaches to the generation of power from solar energy may be roughly divided into five categories: distributed collectors; central receivers; biomass; ocean thermal energy conversion; and photovoltaic devices. The first approach (distributed collectors) is the subject of this module. The material presented is designed to…

  20. Solar thermal power plants

    International Nuclear Information System (INIS)

    Schnatbaum, L.

    2009-01-01

    The solar thermal power plant technology, the opportunities it presents and the developments in the market are outlined. The focus is on the technology of parabolic trough power plants, a proven technology for solar power generation on a large scale. In a parabolic trough power plant, trough-shaped mirrors concentrate the solar irradiation onto a pipe in the focal line of the collector. The thermal energy thus generated is used for electricity generation in a steam turbine. Parabolic trough plants can be combined with thermal storage and fossil or biomass fired heat exchangers to generate electricity even when the sun is not shining. Solar Millennium AG in Erlangen has developed the first power plant of this kind in Europe. After two years of construction the plant started operation in Southern Spain in 2008. This one and its sister projects are important steps leading the way for the whole market. The paper also covers the technological challenges, the key components used and the research and development activities concerning this technology. Solar thermal power plants are ideal for covering peak and medium loads in power grids. In hybrid operation they can also cover base-load. The Solar Chimney power plant, another striking technology for the conversion of solar into electric energy, is described briefly. The paper concludes with a look at the future - the import of solar energy from the deserts of North Africa to central Europe. (author)

  1. Low-temperature thermal expansion

    International Nuclear Information System (INIS)

    Collings, E.W.

    1986-01-01

    This chapter discusses the thermal expansion of insulators and metals. Harmonicity and anharmonicity in thermal expansion are examined. The electronic, magnetic, an other contributions to low temperature thermal expansion are analyzed. The thermodynamics of the Debye isotropic continuum, the lattice-dynamical approach, and the thermal expansion of metals are discussed. Relative linear expansion at low temperatures is reviewed and further calculations of the electronic thermal expansion coefficient are given. Thermal expansions are given for Cu, Al and Ti. Phenomenologic thermodynamic relationships are also discussed

  2. Thermal Testing Measurements Report

    Energy Technology Data Exchange (ETDEWEB)

    R. Wagner

    2002-09-26

    The purpose of the Thermal Testing Measurements Report (Scientific Analysis Report) is to document, in one report, the comprehensive set of measurements taken within the Yucca Mountain Project Thermal Testing Program since its inception in 1996. Currently, the testing performed and measurements collected are either scattered in many level 3 and level 4 milestone reports or, in the case of the ongoing Drift Scale Test, mostly documented in eight informal progress reports. Documentation in existing reports is uneven in level of detail and quality. Furthermore, while all the data collected within the Yucca Mountain Site Characterization Project (YMP) Thermal Testing Program have been submitted periodically to the Technical Data Management System (TDMS), the data structure--several incremental submittals, and documentation formats--are such that the data are often not user-friendly except to those who acquired and processed the data. The documentation in this report is intended to make data collected within the YMP Thermal Testing Program readily usable to end users, such as those representing the Performance Assessment Project, Repository Design Project, and Engineered Systems Sub-Project. Since either detailed level 3 and level 4 reports exist or the measurements are straightforward, only brief discussions are provided for each data set. These brief discussions for different data sets are intended to impart a clear sense of applicability of data, so that they will be used properly within the context of measurement uncertainty. This approach also keeps this report to a manageable size, an important consideration because the report encompasses nearly all measurements for three long-term thermal tests. As appropriate, thermal testing data currently residing in the TDMS have been reorganized and reformatted from cumbersome, user-unfriendly Input-Data Tracking Numbers (DTNs) into a new set of Output-DTNs. These Output-DTNs provide a readily usable data structure

  3. Wedge Heat-Flux Indicators for Flash Thermography

    Science.gov (United States)

    Koshti, Ajay M.

    2003-01-01

    Wedge indicators have been proposed for measuring thermal radiation that impinges on specimens illuminated by flash lamps for thermographic inspection. Heat fluxes measured by use of these indicators would be used, along with known thermal, radiative, and geometric properties of the specimens, to estimate peak flash temperatures on the specimen surfaces. These indicators would be inexpensive alternatives to high-speed infrared pyrometers, which would otherwise be needed for measuring peak flash surface temperatures. The wedge is made from any suitable homogenous material such as plastic. The choice of material is governed by the equation given. One side of the wedge is covered by a temperature sensitive compound that decomposes irreversibly when its temperature exceeds a rated temperature (T-rated). The uncoated side would be positioned alongside or in place of the specimen and exposed to the flash, then the wedge thickness at the boundary between the white and blackened portions measured.

  4. Anomalous thermal properties of glasses at low temperatures

    International Nuclear Information System (INIS)

    Salinger, G.L.

    1976-01-01

    It is shown that specific heat measurements above 0.1 K indicate a distribution of local modes independent of energy; ultrasonic attenuation at low powers indicate that the local mode systems can have at most a few levels; ultrasonic velocity measurements give information about phonon-local mode coupling parameters; the measured thermal conductivity agrees with that calculated from the above information assuming that the energy independent distribution of modes observed in the specific heat is responsible for phonon scattering; thermal expansion and far infrared experiments indicate a phonon assisted tunneling model; several experiments, however, indicate that the modes observed in the specific heat measurements may not all scatter phonons

  5. Nordic eHealth Indicators

    DEFF Research Database (Denmark)

    Hyppönen, Hannele; Faxvaag, Arild; Gilstad, Heidi

    2013-01-01

    eHealth indicator and benchmarking activities are rapidly increasing nationally and internationally. The work is rarely based on a transparent methodology for indicator definition. This article describes first results of testing an indicator methodology for defining eHealth indicators, which...... was reported at the Medical Informatics Europe conference in 2012. The core elements of the methodology are illustrated, demonstrating validation of each of them in the context of Nordic eHealth Indicator work. Validation proved the importance of conducting each of the steps of the methodology, with several...

  6. Determination of Zinc Status in Humans: Which Indicator Should We Use?

    Directory of Open Access Journals (Sweden)

    Frank T. Wieringa

    2015-05-01

    Full Text Available Zinc deficiency has serious wide-ranging health consequences and is thought to be one of the most prevalent micronutrient deficiencies in the world. However, reliable indicators or biomarkers to assess zinc status are not available at present. Indirect indicators such as the prevalence of stunting or anemia, iron deficiency, as well as more direct indicators such as plasma zinc concentrations are being used at present to estimate the prevalence of zinc deficiency in populations. However, as this paper shows by using data from a recent national micronutrient survey in Vietnam, the estimates of the prevalence of zinc deficiency using these different indicators can vary widely, leading to inconsistencies. In this paper, zinc deficiency among children is four times more prevalent than iron deficiency and 2.3 times more than stunting prevalence for example. This can lead not only to confusion concerning the real extent of the prevalence of zinc deficiency in populations, but also makes it hard to inform policy on whether action is needed or not. Moreover, evaluation of programs is hampered by the lack of a clear indicator. Efforts should be made to identify the most suitable indicator to evaluate the impact of programs aimed at improving zinc status and health of populations.

  7. Radiant heat and thermal comfort in vehicles.

    Science.gov (United States)

    Devonshire, Joel M; Sayer, James R

    2005-01-01

    Infrared-reflective (IRR) treatment of automotive glass has been shown to reduce air temperature in vehicle cabins, thereby increasing fuel economy and occupant comfort. Its effect on radiant heat, however, may augment these benefits. In this study, the hypothesis that radiant heat affects subjective comfort ratings in a vehicle was tested. IRR films were systematically applied to the driver-side window of an outdoor stationary vehicle. In Phase 1, cabin air temperature was controlled while participants rated their thermal comfort. In Phase 2, air temperature was adjusted according to participants' responses. Results in Phase 1 showed that the IRR treatment improved thermal comfort on the left forearm, which was exposed to direct solar irradiance, but not whole-body thermal comfort. In Phase 2, participants indicated that they were comfortable at a higher air temperature (mean of 2.5 degrees F [1.4 degrees C]) with the IRR treatment than in the untreated condition. The results indicate that reducing radiant heat via IRR treatment affects subjective assessments of thermal comfort and allows occupants to maintain the same level of comfort in a warmer vehicle cabin. Applications of this research include future implementations of IRR treatment on automotive glass that may lead to greater fuel economy savings and occupant comfort than have previously been estimated.

  8. The thermal evolution of sporopollenin

    Energy Technology Data Exchange (ETDEWEB)

    Yule, B.L.; Roberts, S.; Marshall, J.E.A.

    2000-07-01

    Micro Fourier-Transform Infrared (FT-IR) spectroscopy in combination with transmitted and reflected light microspectrophotometry relates the chemical and physical properties of sporopollenin during thermal maturation. During maturation, sporopollenin exhibits a wide range of colours before there are any significant changes in the reflectance R{sub sp}. The immature phase is characterised by subtle colour changes through a series of progressively darkening yellows. This coincides with a reduction in the relative proportion of C=O groups and an increase in the relative proportion of aliphatic CH{sub 2} and CH{sub 3} groups. During the mature phase, functional groups within spores and pollen are thermally cracked to generate hydrocarbons. Their colours change rapidly through orange and brown and the FT-IR data indicate the loss of a considerable portion of the aliphatic groups and increases in the C=C content associated with aromatic rings. Significant structural reorganisation during the spore 'oil-window' results in the formation of isolated aromatic rings. A further increase in maturity yields little change in colour but a rapid increase in reflectivity. This is caused by the formation of multi-ring aromatic units from isolated aromatic units. The size of these polyaromatic units increases with rank. Investigation of artificially matured samples of Lycopodium clavatum spores indicates considerable chemical differences in C=O, C=C and aromatic skeletal structure, in comparison to fossil palynomorphs, although they progress through a similar series of colours. Only the behavior of the aliphatic CH{sub 2}, CH{sub 3} groups, in artificially heated samples replicates that seen in samples matured naturally, under geological conditions.

  9. Preliminary requirements for thermal storage subsystems in solar thermal applications

    Energy Technology Data Exchange (ETDEWEB)

    Copeland, R.J.

    1980-04-01

    Methodologies for the analysis of value and comparing thermal storage concepts are presented. Value is a measure of worth and is determined by the cost of conventional fuel systems. Value data for thermal storage in large solar thermal electric power applications are presented. Thermal storage concepts must be compared when all are performing the same mission. A method for doing that analysis, called the ranking index, is derived. Necessary data to use the methodology are included.

  10. Hepatitis B prevalence in Denmark

    DEFF Research Database (Denmark)

    Hansen, N; Hay, G; Cowan, S

    2013-01-01

    The prevalence of chronic hepatitis B virus (HBV) infection in Denmark is not clear. The primary aim of this study was to estimate the prevalence of chronic HBV infection in Denmark. The capture–recapture method was used to estimate the total population diagnosed with chronic HBV infection...... in Denmark using four nationwide registers. The population with undiagnosed chronic HBV infection was estimated by incorporating data from a two-year nationwide HBsAg screening programme in pregnant women. We identified 4,466 individuals with chronic HBV infection in the four registers until the end of 2007...... alive with HBV infection was 10,668 (95% CI: 10,224–16,164), corresponding to a prevalence of 0.24% (95% CI: 0.23–0.37%) in the Danish population older than 15 years. The estimated prevalence of chronic HBV infection among adults in Denmark was lower than reported from other northern European countries...

  11. Prevalence of Food Additive Intolerance

    DEFF Research Database (Denmark)

    Madsen, Charlotte Bernhard

    1994-01-01

    estimates are questionable but may be less than 0.15%. In adults and children with reproducible, and with more subjective symptoms, such as headache and behavioural/mood change the prevalence is even lower (0.026%). Food additive intolerance is primarily found in atopic children with cutaneous symptoms......1 The existing prevalence estimates of food additive intolerance(1-4) are being reviewed. 2 In the EEC report the estimated frequency of food additive intolerance is 0.03% to 0.15% based on data from patient groups. 3 The British population study results in a prevalence estimate of 0.......026%. The challenged population is 81 children and adults with a history of reproducible clinical symptoms after ingestion of food additives. 4 In the Danish population study a prevalence of 1-2% is found in children age 5-16. In this study a total of 606 children mainly with atopic disease have been challenged. 5...

  12. Quantum thermal rectification to design thermal diodes and transistors

    Energy Technology Data Exchange (ETDEWEB)

    Joulain, Karl; Ezzahri, Younes; Ordonez-Miranda, Jose [Univ. de Poitiers, Futuroscope Chasseneuil (France). Inst. Pprime, CNRS

    2017-05-01

    We study in this article how heat can be exchanged between two-level systems, each of them being coupled to a thermal reservoir. Calculations are performed solving a master equation for the density matrix using the Born-Markov approximation. We analyse the conditions for which a thermal diode and a thermal transistor can be obtained as well as their optimisation.

  13. Prevalence of supernumerary teeth based on panoramic radiographs revisited.

    Science.gov (United States)

    Anthonappa, Robert P; King, Nigel M; Rabie, A Bakr M

    2013-01-01

    The purposes of this study were to: (1) identify, within the literature, reports on the prevalence of supernumerary teeth that have used panoramic radiographs (PRs) as a diagnostic tool; and (2) reanalyze the prevalence data based on the current sensitivity figures for PRs in identifying supernumerary teeth. A comprehensive literature search in three databases identified 16 potential studies, of which seven were included in the final analysis. Based on the recent sensitivity data for PRs in identifying supernumerary teeth, the equation "P=r/q" was derived to reanalyze the prevalence data. Multiple regression analysis and paired t test were employed for the statistical analysis. The prevalence figure ranged from 1.2 percent to three percent, and, subsequent to the application of the adjustment factor, it increased to range from 2.4 percent to six percent. The prevalence figures for males was significantly higher than for females (RR=1.37). Furthermore, due to insufficient studies, statistical analysis was unable to elicit ethnical differences in the prevalence figures. The prevalence of supernumerary teeth is higher than indicated in the published reports and ranges from 2.4 percent to six percent or possibly even higher.

  14. Comparative analyses on dynamic performances of photovoltaic–thermal solar collectors integrated with phase change materials

    International Nuclear Information System (INIS)

    Su, Di; Jia, Yuting; Alva, Guruprasad; Liu, Lingkun; Fang, Guiyin

    2017-01-01

    Highlights: • The dynamic model of photovoltaic–thermal collector with phase change material was developed. • The performances of photovoltaic–thermal collector are performed comparative analyses. • The performances of photovoltaic–thermal collector with phase change material were evaluated. • Upper phase change material mode can improve performances of photovoltaic–thermal collector. - Abstract: The operating conditions (especially temperature) of photovoltaic–thermal solar collectors have significant influence on dynamic performance of the hybrid photovoltaic–thermal solar collectors. Only a small percentage of incoming solar radiation can be converted into electricity, and the rest is converted into heat. This heat leads to a decrease in efficiency of the photovoltaic module. In order to improve the performance of the hybrid photovoltaic–thermal solar collector, we performed comparative analyses on a hybrid photovoltaic–thermal solar collector integrated with phase change material. Electrical and thermal parameters like solar cell temperature, outlet temperature of air, electrical power, thermal power, electrical efficiency, thermal efficiency and overall efficiency are simulated and analyzed to evaluate the dynamic performance of the hybrid photovoltaic–thermal collector. It is found that the position of phase change material layer in the photovoltaic–thermal collector has a significant effect on the performance of the photovoltaic–thermal collector. The results indicate that upper phase change material mode in the photovoltaic–thermal collector can significantly improve the thermal and electrical performance of photovoltaic–thermal collector. It is found that overall efficiency of photovoltaic–thermal collector in ‘upper phase change material’ mode is 10.7% higher than that in ‘no phase change material’ mode. Further, for a photovoltaic–thermal collector with upper phase change material, it is verified that 3 cm

  15. Prevalence of COPD in Copenhagen

    DEFF Research Database (Denmark)

    Fabricius, Peder; Løkke, Anders; Marott, Jacob Louis

    2011-01-01

    COPD is a leading cause of death worldwide; however, prevalence estimates have varied considerably in previous studies. This study aimed to determine the prevalence and severity of COPD in Copenhagen using data from the 4th examination of The Copenhagen City Heart Study, to investigate...... the relationship between tobacco consumption and COPD, and to characterize the subjects with COPD with regard to BMI, dyspnoea, treatment with respiratory medication and co-morbidities....

  16. Thermal effluents from nuclear power plant influences species distribution and thermal tolerance of fishes in reservoirs

    International Nuclear Information System (INIS)

    Pal, A.K.; Das, T.; Dalvi, R.S.; Bagchi, S.; Manush, S.M.; Ayyappan, S.; Chandrachoodan, P.P.; Apte, S.K.; Ravi, P.M.

    2007-01-01

    During electricity generation water bodies like reservoir act as a heat sink for thermal effluent discharges from nuclear power plant. We hypothesized that the fish fauna gets distributed according to their temperature preference in the thermal gradient. In a simulated environment using critical thermal methodology (CTM), we assessed thermal tolerance and metabolic profile of fishes (Puntius filamentosus, Parluciosoma daniconius, Ompok malabaricus, Mastacembelus armatus, Labeo calbasu, Horabragrus brachysoma, Etroplus suratensis, Danio aequipinnatus and Gonoproktopterus curmuca) collected from Kadra reservoir in Karnataka state. Results of CTM tests agrees with the species abundance as per the temperature gradient formed in the reservoir due to thermal effluent discharge. E. suratensis and H. brachysoma) appear to be adapted to high temperature (with high CTMax and CTMin values) and are in abundance at point of thermal discharge. Similarly, P. daniconius, appear to be adapted to cold (low CTM values) is in abundance in lower stretches of Kadra reservoir. Overall results indicate that discharge form nuclear power plant influences the species biodiversity in enclosed water bodies. (author)

  17. Probing the heat sources during thermal runaway process by thermal analysis of different battery chemistries

    Science.gov (United States)

    Zheng, Siqi; Wang, Li; Feng, Xuning; He, Xiangming

    2018-02-01

    Safety issue is very important for the lithium ion battery used in electric vehicle or other applications. This paper probes the heat sources in the thermal runaway processes of lithium ion batteries composed of different chemistries using accelerating rate calorimetry (ARC) and differential scanning calorimetry (DSC). The adiabatic thermal runaway features for the 4 types of commercial lithium ion batteries are tested using ARC, whereas the reaction characteristics of the component materials, including the cathode, the anode and the separator, inside the 4 types of batteries are measured using DSC. The peaks and valleys of the critical component reactions measured by DSC can match the fluctuations in the temperature rise rate measured by ARC, therefore the relevance between the DSC curves and the ARC curves is utilized to probe the heat source in the thermal runaway process and reveal the thermal runaway mechanisms. The results and analysis indicate that internal short circuit is not the only way to thermal runaway, but can lead to extra electrical heat, which is comparable with the heat released by chemical reactions. The analytical approach of the thermal runaway mechanisms in this paper can guide the safety design of commercial lithium ion batteries.

  18. Performance indicators of work activity.

    Science.gov (United States)

    Lahoz, Manoela de Assis; Camarotto, João Alberto

    2012-01-01

    The measurement of performance is a current topic in the management of people in companies, used as a parameter of effectiveness of processes and operations of production. The methods and models of the indicators of current use in the production have concentrated in the assessment of people's performance as determinative resource of the organizational success in the search for the competitiveness. Associated with the classic indicators of performance assessment of the production proceeding, other indicators are used in the assessment of risks and hazards, however with methods focused in the tasks, without connection with the real work activity. The present article explores literature on the models of performance measurement in use in companies and a field research to understand how companies interpret and use indicators that relate health and work, to direct future studies on the subject. Regarding the literature review, one can see that health indicators can be basically divided into two major groups: the legal and managerial indicators. When conducting case studies, it can be realized that companies do not have precisely the concept of health indicator, or were unable to define which of the indicators could be considered indicators of health, considering that absenteeism was the indicator mentioned by the four companies.

  19. Prevalence and pattern of asymptomatic bacteriuria among ...

    African Journals Online (AJOL)

    Most of the cultured organism (89%) were sensitive to Nitrofurantoin. Conclusion: The prevalence of asymptomatic bacteriuria among pregnant women at the UPTH is high. The most prevalent organism was Klebsiella. Keywords: Asymptomatic bacteriuria, Prevalence, Pattern, Klebsiella, Nitrofurantion, Morbidity ...

  20. Anemia do lactente: etiologia e prevalência Anemia in infancy: etiology and prevalence

    Directory of Open Access Journals (Sweden)

    Maria Claret C.M. Hadler

    2002-01-01

    Full Text Available Objetivo: verificar a prevalência de anemia, anemia ferropriva e deficiência de ferro em lactentes, de unidade pública de saúde, no município de Goiânia, Brasil, analisar e correlacionar as variáveis bioquímicas e hematológicas. Métodos: realizou-se estudo transversal. De 120 mães entrevistadas, foram incluídos 110 lactentes de 6 a 12 meses de idade, a termo e não gemelares. Dados socioeconômicos e hematológicos foram obtidos. Colheu-se sangue venoso dos lactentes em jejum para realização do hemograma completo por contagem eletrônica, ferro sérico, ferritina sérica e proteína C-reativa, os quais foram utilizados na avaliação da etiologia ferropriva nos anêmicos. Crianças com hemoglobina Objective: To verify the prevalence of anemia, iron deficiency anemia and iron deficiency in infants, at a Public Health Unit in the city of Goiânia - Brazil; to analyze and to correlate the hematologic and biochemical variables. Methods: A cross-sectional study was carried out. One hundred and ten full-term infants of the 120 mothers interviewed were included. The infants aged between six and twelve months and there were not twins. Socioeconomic and hematologic data was obtained. Venous blood was taken from fasting infants in order to carry out a complete hemogram through electronic cell counting, serum iron, serum ferritin and C-reactive protein, which were used in the evaluation of the etiology of iron deficiency in the anemic infants. Children with hemoglobin < 11g/dL were considered anemic. Results: The prevalence of anemia was 60.9%. In the diagnosis of the iron deficiency etiology in infants without an inflammation process, when considering the alteration of hemoglobin plus two more indices among mean corpuscular volume (MCV or mean corpuscular hemoglobin (MCH or serum ferritin or serum iron, the prevalence of the iron deficiency was 87%. Nevertheless, when red cell distribution width (RDW was included in the indices, the

  1. Thermal Field Theory in Equilibrium

    OpenAIRE

    Andersen, Jens O.

    2000-01-01

    In this talk, I review recent developments in equilibrium thermal field theory. Screened perturbation theory and hard-thermal-loop perturbation theory are discussed. A self-consistent $\\Phi$-derivable approach is also briefly reviewed.

  2. Thermal Conductivity of Coated Paper

    Science.gov (United States)

    Kerr, Lei L.; Pan, Yun-Long; Dinwiddie, Ralph B.; Wang, Hsin; Peterson, Robert C.

    2009-04-01

    In this article, a method for measuring the thermal conductivity of paper using a hot disk system is introduced. To the best of our knowledge, few publications are found discussing the thermal conductivity of a coated paper, although it is important to various forms of today’s digital printing where heat is used for imaging, as well as for toner fusing. This motivated an investigation of the thermal conductivity of paper coating. This study demonstrates that the thermal conductivity is affected by the coating mass and the changes in the thermal conductivity affect toner gloss and density. As the coating mass increases, the thermal conductivity increases. Both the toner gloss and density decrease as the thermal conductivity increases. The toner gloss appears to be more sensitive to the changes in the thermal conductivity.

  3. Thermally Actuated Hydraulic Pumps

    Science.gov (United States)

    Jones, Jack; Ross, Ronald; Chao, Yi

    2008-01-01

    Thermally actuated hydraulic pumps have been proposed for diverse applications in which direct electrical or mechanical actuation is undesirable and the relative slowness of thermal actuation can be tolerated. The proposed pumps would not contain any sliding (wearing) parts in their compressors and, hence, could have long operational lifetimes. The basic principle of a pump according to the proposal is to utilize the thermal expansion and contraction of a wax or other phase-change material in contact with a hydraulic fluid in a rigid chamber. Heating the chamber and its contents from below to above the melting temperature of the phase-change material would cause the material to expand significantly, thus causing a substantial increase in hydraulic pressure and/or a substantial displacement of hydraulic fluid out of the chamber. Similarly, cooling the chamber and its contents from above to below the melting temperature of the phase-change material would cause the material to contract significantly, thus causing a substantial decrease in hydraulic pressure and/or a substantial displacement of hydraulic fluid into the chamber. The displacement of the hydraulic fluid could be used to drive a piston. The figure illustrates a simple example of a hydraulic jack driven by a thermally actuated hydraulic pump. The pump chamber would be a cylinder containing encapsulated wax pellets and containing radial fins to facilitate transfer of heat to and from the wax. The plastic encapsulation would serve as an oil/wax barrier and the remaining interior space could be filled with hydraulic oil. A filter would retain the encapsulated wax particles in the pump chamber while allowing the hydraulic oil to flow into and out of the chamber. In one important class of potential applications, thermally actuated hydraulic pumps, exploiting vertical ocean temperature gradients for heating and cooling as needed, would be used to vary hydraulic pressures to control buoyancy in undersea research

  4. Predictors of Echinococcus multilocularis prevalence in definitive and intermediate hosts

    DEFF Research Database (Denmark)

    Takeuchi-Storm, Nao; Woolsey, Ian David; Jensen, Per Moestrup

    2015-01-01

    Echinococcus multilocularis (EM) is a pathogenic and potentially fatal cestode causing human alveolar echinococcosis (AE). A meta-analysis was conducted using a generalized estimation equation approach (GEE) to assess the effect of taxonomic, environmental and diagnostic variables on EM prevalence...... in different hosts. Red foxes (Vulpes vulpes) had significantly higher prevalence of EM than domestic dogs (Canis lupus familiaris), with the diagnostic method playing an important factor in assessing prevalence. For intermediate hosts genera was significantly associated with EM prevalence although...... there was some indication of publication bias in this dataset. This study also highlights the possible importance of temperature and precipitation to EM transmission. This implies the possibility of a changing climate affecting the future distribution of the parasite....

  5. Prevalence of gestational diabetes mellitus among women born in Greenland

    DEFF Research Database (Denmark)

    Jacobsen, Jytte Lindskov; Jørgensen, Marit Eika

    2010-01-01

    OBJECTIVES: To estimate the prevalence of gestational diabetes mellitus (GDM) among Greenlanders and to evaluate the quality of the current screening procedure for gestational diabetes. STUDY DESIGN: Observational retrospective study of consecutive birth-log data and medical records on pregnant....... However, only 54% of those women were screened. The prevalence of gestational diabetes was calculated to be 4.3% among high-risk Greenlandic pregnant women (2/46) (95% CI 0-10.0%). CONCLUSIONS: Despite a suboptimal screening rate, the prevalence of GDM among Greenlanders seems to be relatively low...... to find and treat all women with GDM. The number of screened women compared to the number of births occurring annually could be used as an indicator of screening efficacy. Diabetes prevention initiatives should be given high priority to avoid high rates of GDM in the future, as increasing prevalence...

  6. Prevalence of intimate partner violence and its relationship to physical and psychological health indicators

    Directory of Open Access Journals (Sweden)

    Sara Ulla Díez

    2009-01-01

    Full Text Available La violencia contra la pareja es un grave problema que afecta a todos los países, culturas y niveles sociales. Los centros de Atención Primaria y unidades de urgencias tienen un papel esencial para proporcionar asistencia cuando las víctimas son severamente golpeadas, y ante posibles consecuencias sobre su salud a medio o largo plazo. El objetivo de este estudio ex post facto fue analizar la prevalencia de los distintos tipos de violencia en el seno de la pareja (física, psicológica y sexual y su relación con indicadores físicos y psicológicos. Siguiendo un diseño transversal, se entrevistó a una muestra aleatoria de 333 mujeres mediante el Woman Abuse Screening Tool y un listado de síntomas e indicadores de salud. El 18% de la muestra informó sufrir algún tipo de violencia por parte de sus parejas. El abuso estaba relacionado significativamente con las migrañas, dolor de cabeza, problemas respiratorios, dolor abdominal, falta de apetito, ingesta de alcohol, consumo de antidepresivos, hipersomnia, y dificultades para la concentración y para tomar decisiones. La violencia contra la pareja es un factor de riesgo para la salud, por lo que es importante reforzar el papel que juegan los centros de Atención Primaria para su detección.

  7. Angular kyphosis as an indicator of the prevalence of Pott's disease ...

    African Journals Online (AJOL)

    Less frequent aetiologies included fractures (2), osteoporosis (1), congenital malformation (1) and kyphosis of unknown origin (2). Eleven of the kyphotic patients were seeking care for unrelated problems and were asymptomatic in respect of their kyphoses. As a subset, the asymptomatic individuals demonstrated a similar ...

  8. Angular kyphosis as an indicator of the prevalence of Pott's disease ...

    African Journals Online (AJOL)

    'rounded' or 'angular'. Rounded kyphosis is common and includes physiological, osteoporotic, postural and. Scheuermann's kyphoses. Angular kyphosis, in contrast, is characterised by an abrupt increase in the dorsal angulation of the spine within the span of a few vertebrae. Angular. Division of Orthopaedics, University of ...

  9. the prevalence of obesity as indicated by body mass index among ...

    African Journals Online (AJOL)

    Uwaifoh

    2012-03-30

    Mar 30, 2012 ... Many Nigerian cities like Aba, have witnessed an increase in the number of fast food outlets as well as information technology revolution, both of which have greatly influenced the way we live. The BMI in this study is. 28.98kg/m2 and is in keeping with overweight. This is similar to 28.76 +5.9kg/m2 observed ...

  10. Thermal Analysis of Pure Uranium Metal, UMo and UMoSi Alloys Using a Differential Thermal Analyzer

    International Nuclear Information System (INIS)

    Yanlinastuti; Sutri Indaryati; Rahmiati

    2010-01-01

    Thermal analysis of pure uranium metal, U-7%Mo and U-7%Mo-1%Si alloys have been done using a Differential Thermal Analyzer (DTA). The experiments are conducted in order to measure the thermal stability, thermochemical properties of elevated temperature and enthalpy of the specimens. From the analysis results it is showed that uranium metal will transform from α to β phases at temperature of 667.16°C and enthalpy of 2.3034 cal/g and from β to γ phases at temperature of 773.05 °C and enthalpy of 2.8725 cal/g and start melting at temperature of 1125.26 °C and enthalpy of 2.1316 cal/g. The U-7%Mo shows its thermal stability up to temperature of 650 °C and its thermal changes at temperature of 673.75 °C indicated by the formation of an endothermic peak and enthalpy of 0.0257 cal/g. The U-7%Mo-1%Si alloys shows its thermal stability up to temperature of 550 °C and its thermal changes at temperature of 574.18 °C indicated by the formation of an endothermic peak and enthalpy of 0.613 cal/g. From the three specimens it is showed that they have a good thermal stability at temperature up to 550 °C. (author)

  11. Study of thermal behavior of phytic acid

    Directory of Open Access Journals (Sweden)

    André Luis Máximo Daneluti

    2013-06-01

    Full Text Available Phytic acid is a natural compound widely used as depigmenting agent in galenic cosmetic emulsions. However, we have observed experimentally that phytic acid, when heated to 150 ºC for around one hour, shows evidence of thermal decomposition. Few studies investigating this substance alone with regard to its stability are available in the literature. This fact prompted the present study to characterize this species and its thermal behavior using thermal analysis (TG/DTG and DSC and to associate the results of these techniques with those obtained by elemental analysis (EA and absorption spectroscopy in the infrared region. The TG/DTG and DSC curves allowed evaluation of the thermal behavior of the sample of phytic acid and enabled use of the non-isothermal thermogravimetric method to study the kinetics of the three main mass-loss events: dehydration I, dehydration II and thermal decomposition. The combination of infrared absorption spectroscopy and elemental analysis techniques allowed evaluation of the intermediate products of the thermal decomposition of phytic acid. The infrared spectra of samples taken during the heating process revealed a reduction in the intensity of the absorption band related to O-H stretching as a result of the dehydration process. Furthermore, elemental analysis results showed an increase in the carbon content and a decrease in the hydrogen content at temperatures of 95, 150, 263 and 380 °C. Visually, darkening of the material was observed at 150 °C, indicating that the thermal decomposition of the material started at this temperature. At a temperature of 380 °C, thermal decomposition progressed, leading to a decrease in carbon and hydrogen. The results of thermogravimetry coupled with those of elemental analysis allow us to conclude that there was agreement between the percentages of phytic acid found in aqueous solution. The kinetic study by the non-isothermal thermogravimetric method showed that the dehydration

  12. Adaptive thermal comfort for buildings in Portugal based on occupants' thermal perception

    Energy Technology Data Exchange (ETDEWEB)

    Matias, L.; Pina Santos, C.; Rebelo, M. [LNEC National Laboratory for Civil Engineering, Lisbon (Portugal); Almeida, S. [FCT Foundation for Science and Technology, Lisbon (Portugal); Correia Guedes, M. [IST Higher Technical Inst., Lisbon (Portugal)

    2009-07-01

    The use of air conditioning systems in Portugal has increased in recent years. Most new service buildings are equipped with mechanical air conditioning systems, either due to commercial reasons, productivity, or due to high internal thermal loads, and solar gains through windows. However, a large percentage of older service buildings are still naturally ventilated. In ASHRAE 55 thermal comfort standard, an adaptive model was adopted as an optional method for determining acceptable thermal conditions in naturally conditioned spaces. Recently, Portugal's National Laboratory for Civil Engineering (LNEC) initiated an interdisciplinary research study in this field. The research team of physicists, social scientists, and civil engineers developed better modeling of adaptive thermal strategies. This paper described the adaptive approach that defined indoor thermal comfort requirements applicable to Portuguese buildings. The study focused on assessing, in real use conditions, indoor environments and the response of occupants of office and educational buildings, and homes for the elderly. The results were obtained from 285 field surveys carried out on 40 buildings and a set of 2367 questionnaires completed by occupants. Field surveys assessed and measured the main indoor environmental parameters during summer, winter and mid-season. This paper included the results of the analysis to the occupants' thermal perception and expectation, by relating them to both measured and collected indoor thermal environments and outdoor climate. The relation between the occupants' thermal sensation and preference was analysed for different types of activities, throughout different seasons. Results showed that occupants may tolerate broader temperature ranges than those indicated in current standards, particularly in the heating season. 10 refs., 3 tabs., 9 figs.

  13. Craniometric Indices of Nigeria Skulls

    OpenAIRE

    Orish CN; Ibeachu PC

    2016-01-01

    Introduction: Craniometric indices show the percentage relationship between different dimensions. It is an important parameter for classification of race and sex of individuals of unknown identity. This study was undertaken to determine the craniometric indices of gnathic, palatal, orbital, cranial and nasal indices of Nigerian skulls. Materials and Methods: One hundred adult dry skulls, (78 males, and 22 females) free from damage and deformities from eleven Departments of Anatomy in Nige...

  14. The politics of SEA indicators

    DEFF Research Database (Denmark)

    Gao, Jingjing; Kørnøv, Lone; Christensen, Per

    2013-01-01

    The use of indicators is not only technical and science-led, but also a value-laden social process, and thus concerns public participation, political judgment and decision-making. This article approaches the Chinese SEA indicator system from a science-policy interface and aims at: 1) contributing...... guidance, and a weak explicit recognition that policy plays a role in choosing and using indicators. Recent development, however, indicates a growing recognition of the politics involved and thus also leads to more involvement of stakeholders....

  15. Proposal of indicators to evaluate complementary feeding based on World Health Organization indicators.

    Science.gov (United States)

    Saldan, Paula Chuproski; Venancio, Sonia Isoyama; Saldiva, Silvia Regina Dias Medici; de Mello, Débora Falleiros

    2016-09-01

    This study compares complementary feeding World Health Organization (WHO) indicators with those built in accordance with Brazilian recommendations (Ten Steps to Healthy Feeding). A cross-sectional study was carried out during the National Immunization Campaign against Poliomyelitis in Guarapuava-Paraná, Brazil, in 2012. Feeding data from 1,355 children aged 6-23 months were obtained through the 24 h diet recall. Based on five indicators, the proportion of adequacy was evaluated: introduction of solid, semi-solid, or soft foods; minimum dietary diversity; meal frequency; acceptable diet; and consumption of iron-rich foods. Complementary feeding showed adequacy higher than 85% in most WHO indicators, while review by the Ten Steps assessment method showed a less favorable circumstance and a high intake of unhealthy foods. WHO indicators may not reflect the complementary feeding conditions of children in countries with low malnutrition rates and an increased prevalence of overweight/obesity. The use of indicators according to the Ten Steps can be useful to identify problems and redirect actions aimed at promoting complementary feeding. © 2016 John Wiley & Sons Australia, Ltd.

  16. Thermal comfort: research and practice

    NARCIS (Netherlands)

    Ir. Joost van Hoof; Mitja Mazej; Jan Hensen

    2010-01-01

    Thermal comfort -the state of mind, which expresses satisfaction with the thermal environment- is an important aspect of the building design process as modern man spends most of the day indoors. This paper reviews the developments in indoor thermal comfort research and practice since the second half

  17. Thermal Stabilization Blend Plan

    Energy Technology Data Exchange (ETDEWEB)

    RISENMAY, H.R.

    2000-05-02

    This Blend Plan documents the feed material items that are stored in 2736-2 vaults, the 2736-ZB 638 cage, the 192C vault, and the 225 vault that will be processed through the thermal stabilization furnaces. The purpose of thermal stabilization is to heat the material to 1000 degrees Celsius to drive off all water and leave the plutonium and/or uranium as oxides. The stabilized material will be sampled to determine the Loss On Ignition (LOI) or percent water. The stabilized material must meet water content or LOI of less than 0.5% to be acceptable for storage under DOE-STD-3013-99 specifications. Out of specification material will be recycled through the furnaces until the water or LOI limits are met.

  18. Encyclopedia of thermal stresses

    CERN Document Server

    2014-01-01

    The Encyclopedia of Thermal Stresses is an important interdisciplinary reference work.  In addition to topics on thermal stresses, it contains entries on related topics, such as the theory of elasticity, heat conduction, thermodynamics, appropriate topics on applied mathematics, and topics on numerical methods. The Encyclopedia is aimed at undergraduate and graduate students, researchers and engineers. It brings together well established knowledge and recently received results. All entries were prepared  by leading experts from all over the world, and are presented in an easily accessible format. The work is lavishly illustrated, examples and applications are given where appropriate, ideas for further development abound, and the work will challenge many students and researchers to pursue new results of their own. This work can also serve as a one-stop resource for all who need succinct, concise, reliable and up to date information in short encyclopedic entries, while the extensive references will be of inte...

  19. Underground Coal Thermal Treatment

    Energy Technology Data Exchange (ETDEWEB)

    Smith, P. [Univ. of Utah, Salt Lake City, UT (United States); Deo, M. [Univ. of Utah, Salt Lake City, UT (United States); Eddings, E. [Univ. of Utah, Salt Lake City, UT (United States); Sarofim, A. [Univ. of Utah, Salt Lake City, UT (United States); Gueishen, K. [Univ. of Utah, Salt Lake City, UT (United States); Hradisky, M. [Univ. of Utah, Salt Lake City, UT (United States); Kelly, K. [Univ. of Utah, Salt Lake City, UT (United States); Mandalaparty, P. [Univ. of Utah, Salt Lake City, UT (United States); Zhang, H. [Univ. of Utah, Salt Lake City, UT (United States)

    2012-01-11

    The long-term objective of this work is to develop a transformational energy production technology by insitu thermal treatment of a coal seam for the production of substitute natural gas (SNG) while leaving much of the coal's carbon in the ground. This process converts coal to a high-efficiency, low-GHG emitting gas fuel. It holds the potential of providing environmentally acceptable access to previously unusable coal resources. This topical report discusses the development of experimental capabilities, the collection of available data, and the development of simulation tools to obtain process thermo-chemical and geo-thermal parameters in preparation for the eventual demonstration in a coal seam. It also includes experimental and modeling studies of CO2 sequestration.

  20. Thermal effects in supercapacitors

    CERN Document Server

    Xiong, Guoping; Fisher, Timothy S

    2015-01-01

    This Brief reviews contemporary research conducted in university and industry laboratories on thermal management in electrochemical energy storage systems (capacitors and batteries) that have been widely used as power sources in many practical applications, such as automobiles, hybrid transport, renewable energy installations, power backup and electronic devices. Placing a particular emphasis on supercapacitors, the authors discuss how supercapacitors, or ultra capacitors, are complementing and  replacing, batteries because of their faster power delivery, longer life cycle and higher coulombic efficiency, while providing higher energy density than conventional electrolytic capacitors. Recent advances in both macro- and micro capacitor technologies are covered. The work facilitates systematic understanding of thermal transport in such devices that can help develop better power management systems.