WorldWideScience

Sample records for preprint final version

  1. search.bioPreprint: a discovery tool for cutting edge, preprint biomedical research articles [version 2; referees: 2 approved

    Directory of Open Access Journals (Sweden)

    Carrie L. Iwema

    2016-07-01

    Full Text Available The time it takes for a completed manuscript to be published traditionally can be extremely lengthy. Article publication delay, which occurs in part due to constraints associated with peer review, can prevent the timely dissemination of critical and actionable data associated with new information on rare diseases or developing health concerns such as Zika virus. Preprint servers are open access online repositories housing preprint research articles that enable authors (1 to make their research immediately and freely available and (2 to receive commentary and peer review prior to journal submission. There is a growing movement of preprint advocates aiming to change the current journal publication and peer review system, proposing that preprints catalyze biomedical discovery, support career advancement, and improve scientific communication. While the number of articles submitted to and hosted by preprint servers are gradually increasing, there has been no simple way to identify biomedical research published in a preprint format, as they are not typically indexed and are only discoverable by directly searching the specific preprint server websites. To address this issue, we created a search engine that quickly compiles preprints from disparate host repositories and provides a one-stop search solution. Additionally, we developed a web application that bolsters the discovery of preprints by enabling each and every word or phrase appearing on any web site to be integrated with articles from preprint servers. This tool, search.bioPreprint, is publicly available at http://www.hsls.pitt.edu/resources/preprint.

  2. Preprints, Impact Factors, and Unethical Behavior, but also Lots of Good News.

    Science.gov (United States)

    Gölitz, Peter

    2016-10-24

    Preprints as well? There is already the Accepted Article (published directly after refereeing and author revision), the Early-View/ASAP-Version (after refereeing, editing and proofing), and the final Version of Record. The problems with preprints are discussed in this Editorial along with the undeclared resubmission of previously rejected manuscripts: publication times, color costs, and Angewandte Symposia are further topics.

  3. Electronic Preprints

    Science.gov (United States)

    Hanisch, R.

    1999-12-01

    Despite the tremendous advances in electronic publications and the increasing rapidity with which papers are now moving from acceptance into ``print,'' preprints continue to be an important mode of communication within the astronomy community. The Los Alamos e-preprint service, astro-ph, provides for rapid and cost-free (to authors and readers) dissemination of manuscripts. As the use of astro-ph has increased the number of paper preprints in circulation to libraries has decreased, and institutional preprint series appear to be waning. It is unfortunate, however, that astro-ph does not function in collaboration with the refereed publications. For example, there is no systematic tracking of manuscripts from preprint to their final, published form, and as a centralized archive it is difficult to distribute the tracking and maintenance functions. It retains documents that have been superseded or have become obsolete. We are currently developing a distributed preprint and document management system which can support both distributed collections of preprints (e.g., traditional institutional preprint series), can link to the LANL collections, can index other documents in the ``grey'' literature (observatory reports, telescope and instrument user's manuals, calls for proposals, etc.), and can function as a manuscript submission tool for the refereed journals. This system is being developed to work cooperatively with the refereed literature so that, for example, links to preprints are updated to links to the final published papers.

  4. Incorporating Electronic Preprints into an Effective Publishing System

    Science.gov (United States)

    Hanisch, R. J.; Payne, H. E.; Huizinga, J. E.; Stevens-Rayburn, S.; Bouton, E. N.; Eichhorn, G.; Boyce, P. B.

    Preprints continue to play an important role in the astronomical literature, both for rapid dissemination of new results and for establishing institutional benchmarks for quality and productivity. Electronic preprint services have become a popular alternative to paper preprint distribution. As centralized services, however, they ignore the importance of preprints in defining an organization's scientific profile. Moreover, the existing electronic preprint services are far from comprehensive in content (relying totally on author contributions), and there is no systematic tracking of the preprint into the refereed literature. We are now implementing a distributed electronic preprint service which will provide a common index to preprint databases located at separate astronomy institutions. Because maintenance of the preprint databases is distributed, our expectation is that the contents will be much more complete than is the case for the existing services. A key element of our approach is to assign unique identifiers to preprints as they are entered into the system, and to use these identifiers to track the preprint into the refereed literature. Once a preprint is published users of the preprint database will be directed to the published version, with the preprint version deleted from the system. We are also developing simple, portable tools for maintaining a local preprint database. Both these tools and the distributed preprint system infrastructure will be extensible to other ``gray literature'' documents, such as observatory and instrumentation manuals and technical reports.

  5. Preprinting Microbiology

    Science.gov (United States)

    2017-01-01

    ABSTRACT The field of microbiology has experienced significant growth due to transformative advances in technology and the influx of scientists driven by a curiosity to understand how microbes sustain myriad biochemical processes that maintain Earth. With this explosion in scientific output, a significant bottleneck has been the ability to rapidly disseminate new knowledge to peers and the public. Preprints have emerged as a tool that a growing number of microbiologists are using to overcome this bottleneck. Posting preprints can help to transparently recruit a more diverse pool of reviewers prior to submitting to a journal for formal peer review. Although the use of preprints is still limited in the biological sciences, early indications are that preprints are a robust tool that can complement and enhance peer-reviewed publications. As publishing moves to embrace advances in Internet technology, there are many opportunities for preprints and peer-reviewed journals to coexist in the same ecosystem. PMID:28536284

  6. Aquarius Salinity Retrieval Algorithm: Final Pre-Launch Version

    Science.gov (United States)

    Wentz, Frank J.; Le Vine, David M.

    2011-01-01

    This document provides the theoretical basis for the Aquarius salinity retrieval algorithm. The inputs to the algorithm are the Aquarius antenna temperature (T(sub A)) measurements along with a number of NCEP operational products and pre-computed tables of space radiation coming from the galaxy and sun. The output is sea-surface salinity and many intermediate variables required for the salinity calculation. This revision of the Algorithm Theoretical Basis Document (ATBD) is intended to be the final pre-launch version.

  7. 150--9 Dec 2009.indd [Final version].indd

    African Journals Online (AJOL)

    2009-12-09

    Dec 9, 2009 ... version of the tales in a children's Bible is analysed to show in what way violence serves as ... connected in many cases to the holiness of God (Snyman 2007:69). ..... Daniel continued to pray by kneeling at a window facing.

  8. The Distributed Astronomical Preprint Service

    Science.gov (United States)

    Huizinga, J. E.; Hanisch, Robert J.; Payne, H. E.; Williamson, R. L.

    We have developed a prototype distributed preprint service. The system is hierarchical, with identical software at each node. Site maintenance tools written in Java allow information providers to enter new preprint metadata and to update them when preprints are published. A web site at each node is built on-the-fly from the metadata, allowing both browsing and searching. Parent servers can gather metadata from child servers, allowing the central server to index everything, and to notice new entries. Queries return preprint identifiers (``prepcodes'') which resolve to on-line journals in the case of published preprints.

  9. search.bioPreprint: a discovery tool for cutting edge, preprint biomedical research articles.

    Science.gov (United States)

    Iwema, Carrie L; LaDue, John; Zack, Angela; Chattopadhyay, Ansuman

    2016-01-01

    The time it takes for a completed manuscript to be published traditionally can be extremely lengthy. Article publication delay, which occurs in part due to constraints associated with peer review, can prevent the timely dissemination of critical and actionable data associated with new information on rare diseases or developing health concerns such as Zika virus. Preprint servers are open access online repositories housing preprint research articles that enable authors (1) to make their research immediately and freely available and (2) to receive commentary and peer review prior to journal submission. There is a growing movement of preprint advocates aiming to change the current journal publication and peer review system, proposing that preprints catalyze biomedical discovery, support career advancement, and improve scientific communication. While the number of articles submitted to and hosted by preprint servers are gradually increasing, there has been no simple way to identify biomedical research published in a preprint format, as they are not typically indexed and are only discoverable by directly searching the specific preprint server websites. To address this issue, we created a search engine that quickly compiles preprints from disparate host repositories and provides a one-stop search solution. Additionally, we developed a web application that bolsters the discovery of preprints by enabling each and every word or phrase appearing on any web site to be integrated with articles from preprint servers. This tool, search.bioPreprint, is publicly available at http://www.hsls.pitt.edu/resources/preprint.

  10. Incentives for an adequate, economic and reliable Swiss transmission grid. Final version

    Energy Technology Data Exchange (ETDEWEB)

    Twomey, P.; Neuhoff, K.; Newbery, D.

    2006-11-15

    This comprehensive final report for the Swiss Federal Office of Energy (SFOE) discusses incentives necessary for the implementation of an adequate, economic and reliable Swiss electricity transmission grid. As Switzerland moves towards a more liberalised and competitive electricity market, an essential task of policy makers will be to ensure that incentives are in place for the construction, maintenance and operation of adequate, economic and reliable transmission infrastructure. As well as continuing to serve the domestic market, the location of Switzerland at the centre of Europe also means that policy should embrace opportunities in servicing the developing European Internal Market by providing transit and other services. Topics discussed include the economic evaluation of transmission investment proposals, regulated transmission investment, investments in transmission lines by power merchants, power auctions and congestion management as well as inter-TSO compensation mechanisms. European regulations and practice are discussed as are access questions and transmission charges. Developments in interconnection management and harmonisation are examined. The particular characteristics of the Swiss energy system, its prices and its legal frameworks are discussed. Cross-border trading and security of supply are also discussed

  11. Collide Geneva - Final presentation by artist Cassandre Poirier-Simon (short version)

    CERN Multimedia

    2017-01-01

    On 25 April, 2017, Arts at CERN invited people to the Centre d'Art Contemporain Genève, for the final Presentation of the artist Cassandre Poirier-Simon, winner of the Collide Geneva Award. Established in 2011, Arts at CERN is the official arts programme engaging with art at the cutting edge of scientific research. It offers a whole series of activities around arts and science at CERN, with a clear focus on four artistic research residencies and 3 special visits per year (Collide, Accelerate and Guest Artists). Cassandre Poirier-Simon won the prize Collide Geneva 2016 with Arts at CERN and did her residency from November 2016 to January 2017. She is a designer working in the field of digital writing. During her residency at CERN she was supported with the guide and partnership of Maria Dimou, CERN IT Department, as scientific partner. Also, during this period the Arts at CERN team curated and coordinated visits to experiments, encounters and conversations with scientists, engineers and staff at CERN. The COL...

  12. Independent Verification and Validation SAPHIRE Version 8 Final Report Project Number: N6423 U.S. Nuclear Regulatory Commission

    Energy Technology Data Exchange (ETDEWEB)

    Kent Norris

    2010-04-01

    This report provides an evaluation of the SAPHIRE version 8 software product. SAPHIRE version 8 is being developed with a phased or cyclic iterative rapid application development methodology. Due to this approach, a similar approach has been taken for the IV&V activities on each vital software object. IV&V and Software Quality Assurance (SQA) activities occur throughout the entire development life cycle and therefore, will be required through the full development of SAPHIRE version 8. Later phases of the software life cycle, the operation and maintenance phases, are not applicable in this effort since the IV&V is being done prior to releasing Version 8.

  13. Manual risk zoning wind turbines. Final version. 3rd updated version May 2013. 3 ed.; Handboek risicozonering windturbines. Eindversie. 3e geactualiseerde versie mei 2013

    Energy Technology Data Exchange (ETDEWEB)

    Faasen, C.J.; Franck, P.A.L.; Taris, A.M.H.W. [DNV KEMA, Arnhem (Netherlands)

    2013-05-15

    The title manual has been drafted to be able to quickly inventory the safety risks of wind turbines, which can speed up the licensing procedures for the installation of wind turbines. Attention is paid to the following categories: building areas, roads, waterways, railroads, industrial areas, underground cables and mains, aboveground cables, power transmission lines, dikes and dams, and telecommunication. For each of these categories the risks are calculated. This is an updated version of the manual which was first published in 2000 and updated in 2005 [Dutch] Dit is een actualisatie van het Handboek uit 2005. Het oorspronkelijke Handboek is in 2000 opgesteld. Het in 2000 verschenen Handboek is door ECN samengesteld in opdracht van Novem (nu: Agentschap NL) met als doel een uniforme methode te bieden voor het uitvoeren van kwantitatieve risicoanalyses en voor het toetsen van de resultaten aan acceptatiecriteria. Dit Handboek bood antwoord op de vraag van zowel projectontwikkelaars als overheden naar een algemeen geldende methode om veiligheidsrisico's van windturbines te berekenen voor diverse omgevingsaspecten. In 2005 is een actualisatie van het Handboek uitgebracht door ECN en KEMA in opdracht van SenterNovem (nu onderdeel van Agentschap NL). Daarin is verder ingegaan op turbines met grotere vermogens en is het Handboek aangevuld met rekenvoorbeelden. Vanwege de verdere ontwikkeling van de windturbinetechnologie, aangepaste wetgeving, het feit dat rekenmodellen verouderd waren en dat diverse infrastructuur steeds vaker gebundeld of geclusterd met windturbines wordt gerealiseerd, is het wenselijk / noodzakelijk de eventuele risico's op een consistente en eenduidige wijze in kaart te brengen. Daarom heeft Agentschap NL in 2012 opdracht gegeven aan DNV KEMA om het Handboek opnieuw te actualiseren. Hierbij zijn de resultaten van het rapport: 'Rekenmethodiek zonering windturbines in relatie tot gas- en elektrische infrastructuur' (2012), dat in

  14. Preprint server seeks way to halt plagiarists

    CERN Document Server

    Giles, J

    2003-01-01

    "An unusual case of plagiarism has struck ArXiv, the popular physics preprint server at Cornell University in Ithaca, New York, resulting in the withdrawal of 22 papers...The plagiarism case traces its origins to June 2002, when Yasushi Watanabe, a high-energy physicist at the Tokyo Insitute of Technology, was contacted by Ramy Noboulsi, who said he was a mathematical physicist" (1 page)

  15. Finite Element Modeling for Ultrasonic Transducers (Preprint)

    Science.gov (United States)

    1998-02-27

    virtual prototyping of transducers . Fig. 18 shows a 3D model of a Tonpilz device for low frequency sensing in air. This classical design is usually used...coupled Tonpilz transducer . A thick, flexible matching layer is bonded to the face of the conical head-mass. 7. CONCLUSIONS This paper was intended as a...This is a preprint of a paper published in Proc. SPIE Int. Symp. Medical Imaging 1998, San Diego, Feb 21-27, 1998 Ultrasonic Transducer Engineering

  16. Tunable Wavelength Soft Photoionization of Ionic Liquid Vapors (Preprint)

    Science.gov (United States)

    2009-11-18

    empirical methods to predict the physical properties of ionic liquids: An overview of recent developments. Zeitschrift Fur Physikalische Chemie...calculations. Zeitschrift Fur Physikalische Chemie- Preprint Distribution A: Approved for public release; distribution unlimited 13 International

  17. Los Alamos loses physics archive as preprint pioneer heads east

    CERN Multimedia

    Butler, D

    2001-01-01

    The Los Alamos preprint server is to move to Cornell University. Paul Ginsparg who created the server cites a lack of enthusiasm among senior staff at LANL as a major reason for his departure (1/2 page).

  18. Final Results from U.S. FCEV Learning Demonstration: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wipke, K.; Sprik, S.; Kurtz, J.; Ramsden, T.; Ainscough, C.; Saur, G.

    2012-04-01

    The 'Controlled Hydrogen Fleet and Infrastructure Demonstration and Validation Project,' also known as the National Fuel Cell Electric Vehicle Learning Demonstration, is a U.S. Department of Energy (DOE) project started in 2004 and concluded in late 2011. The purpose of this project was to conduct an integrated field validation that simultaneously examined the performance of fuel cell vehicles and the supporting hydrogen fueling infrastructure. The DOE's National Renewable Energy Laboratory (NREL) received and analyzed all of the raw technical data collected by the industry partners through their participation in the project over its seven-year duration. This paper reviews highlights from the project and draws conclusions about the demonstrated status of the fuel cell vehicle and hydrogen fueling infrastructure technology.

  19. [Software version and medical device software supervision].

    Science.gov (United States)

    Peng, Liang; Liu, Xiaoyan

    2015-01-01

    The importance of software version in the medical device software supervision does not cause enough attention at present. First of all, the effect of software version in the medical device software supervision is discussed, and then the necessity of software version in the medical device software supervision is analyzed based on the discussion of the misunderstanding of software version. Finally the concrete suggestions on software version naming rules, software version supervision for the software in medical devices, and software version supervision scheme are proposed.

  20. The cost of installing central heating. Comparison of Norway and Sweden. Final version; Kostnader ved installasjon av vannbaaren varme. Sammenlikning av Norge og Sverige. Endelig versjon

    Energy Technology Data Exchange (ETDEWEB)

    Haarberg, Karl Johan; Elnan, Kaare; Essen, Jan von; Hovden, Agnete; Ekvall, Thomas; Melbaeck, Johan

    2010-10-22

    The objective of the cost study is to examine costs and cost differences associated with the installation of various technical solutions for water heating in various buildings in Norway and Sweden - regionally and nationally. In addition, the cost study intended to point out any barriers to the increased prevalence of central heating, as well as proposals for measures to remove such. Finally, the cost study in general and in particular barriers placed in a larger environment and climate perspective. (AG)

  1. On the Stern sequence and its twisted version

    CERN Document Server

    Allouche, Jean-Paul

    2012-01-01

    In a recent preprint on ArXiv, Bacher introduced a twisted version of the Stern sequence. His paper contains in particular three conjectures relating the generating series for the Stern sequence and for the twisted Stern sequence. Soon afterwards Coons published two papers in {\\it Integers}: first he proved these conjectures, second he used his result to obtain a correlation-type identity for the Stern sequence. We recall here a simple result of Reznick and we state a similar result for the twisted Stern sequence. We deduce an easy proof of Coons' identity, and a simple proof of Bacher's conjectures. Furthermore we prove identities similar to Coons' for variations on the Stern sequence that include Bacher's sequence.

  2. Wastes = Resources. Summary (public version). Final report. January 2011 - January 2012; Afval = Grondstof. Samenvatting (publieksversie). Eindrapport. Periode Januari 2011 - Januari 2012

    Energy Technology Data Exchange (ETDEWEB)

    Haffmans, S.; De Lint, S.; Karsch, P. [Partners for Innovation, Amsterdam (Netherlands)

    2012-02-15

    The aim of the project 'Waste = Resource' is to give a boost to efficient and high-quality (re)use of raw materials and waste streams in the business sector of the harbor area of Amsterdam/Zaanstad, Netherlands. The objective was to set up at least four projects in the period 1 February 2011-31 January 2012. This final report summarizes the work performed, findings and results [Dutch] Het doel van het project 'Afval = Grondstof' is een impuls te geven aan een efficient en hoogwaardig (her)gebruik van grondstoffen en reststromen in het bedrijfsleven in de havenregio Amsterdam/Zaanstad. De doelstelling was om gedurende de projectperiode (1 februari 2011 - 31 januari 2012) minimaal vier projecten op te zetten, die passen binnen de doelstellingen van het programma en waarvan er minimaal twee met de realisatie gestart zijn. Dit eindrapport geeft een overzicht van de uitgevoerde werkzaamheden, bevindingen en de resultaten tot aan de einddatum van het project (eind januari 2012)

  3. Transparent Conducting Oxides for Infrared Plasmonic Waveguides: ZnO (Preprint)

    Science.gov (United States)

    2014-01-15

    AFRL-RY-WP-TP-2014-0009 TRANSPARENT CONDUCTING OXIDES FOR INFRARED PLASMONIC WAVEGUIDES: ZnO (PREPRINT) Monica Allen, Jeffery Allen...CONDUCTING OXIDES FOR INFRARED PLASMONIC WAVEGUIDES: ZnO (PREPRINT) 5a. CONTRACT NUMBER In-house 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER N...for plasmonic waveguiding applications with an emphasis on highly conducting ZnO . In addition, the paper contains analysis of a set of thin Al-doped

  4. Quasiperiodic Strain Bursts and Self-Organization in Crystal Microplasticity (PREPRINT)

    Science.gov (United States)

    2012-03-01

    AFRL-RX-WP-TP-2012-0249 QUASIPERIODIC STRAIN BURSTS AND SELF- ORGANIZATION IN CRYSTAL MICROPLASTICITY (PREPRINT) D.M. Dimiduk Metals...2012 4. TITLE AND SUBTITLE QUASIPERIODIC STRAIN BURSTS AND SELF-ORGANIZATION IN CRYSTAL MICROPLASTICITY (PREPRINT) 5a. CONTRACT NUMBER In-house...18 Quasiperiodic strain bursts and self-organization in crystal microplasticity S. Papanikolaou,1,2∗ D. M. Dimiduk,3 W. Choi4, J. P. Sethna4, M. D

  5. Scalable SiC Power Switches for Applications in More Electric Vehicles (Preprint)

    Science.gov (United States)

    2007-06-01

    AFRL-PR-WP-TP-2007-237 SCALABLE SiC POWER SWITCHES FOR APPLICATIONS IN MORE ELECTRIC VEHICLES (PREPRINT) Michael S. Mazzola, Douglas Seale...SWITCHES FOR APPLICATIONS IN MORE ELECTRIC VEHICLES (PREPRINT) 5c. PROGRAM ELEMENT NUMBER 63175C 5d. PROJECT NUMBER 1168 5e. TASK NUMBER 13 6...Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39-18 1 Scalable SiC Power Switches for Applications in More Electric Vehicles Abstract

  6. PVWatts Version 5 Manual

    Energy Technology Data Exchange (ETDEWEB)

    Dobos, A. P.

    2014-09-01

    The NREL PVWatts calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes includes several built-in parameters that are hidden from the user. This technical reference describes the sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimate. This reference is applicable to the significantly revised version of PVWatts released by NREL in 2014.

  7. Transformational Element Level Arrays (TELA) Testbed (Preprint)

    Science.gov (United States)

    2007-09-01

    filtered out. For a more detailed discussion of receiver chain analysis see [ Pozar ]6. Once a sufficient level of modeling accuracy has been achieved...Conference Proceedings, March 2006. [6] Pozar , David M., Microwave Engineering, 3rd Edition, Wiley, 2005. [7] Syscalc Version 6.1.8, Arden Technologies

  8. Optimizing the design of preprinted orders for ambulatory chemotherapy: combining oncology, human factors, and graphic design.

    Science.gov (United States)

    Jeon, Jennifer; White, Rachel E; Hunt, Richard G; Cassano-Piché, Andrea L; Easty, Anthony C

    2012-03-01

    To establish a set of guidelines for developing ambulatory chemotherapy preprinted orders. Multiple methods were used to develop the preprinted order guidelines. These included (A) a comprehensive literature review and an environmental scan; (B) analyses of field study observations and incident reports; (C) critical review of evidence from the literature and the field study observation analyses; (D) review of the draft guidelines by a clinical advisory group; and (E) collaboration with graphic designers to develop sample preprinted orders, refine the design guidelines, and format the resulting content. The Guidelines for Developing Ambulatory Chemotherapy Preprinted Orders, which consist of guidance on the design process, content, and graphic design elements of ambulatory chemotherapy preprinted orders, have been established. Health care is a safety critical, dynamic, and complex sociotechnical system. Identifying safety risks in such a system and effectively addressing them often require the expertise of multiple disciplines. This study illustrates how human factors professionals, clinicians, and designers can leverage each other's expertise to uncover commonly overlooked patient safety hazards and to provide health care professionals with innovative, practical, and user-centered tools to minimize those hazards.

  9. Audit of Physicians’ Adherence to a Preprinted Order Set for Community-Acquired Pneumonia

    Science.gov (United States)

    Fowkes, Curt T; Gee, Carol; Bluemink, Tammy; Cole, Dana; Falkner, Barbara L; Hamour, Abu A

    2010-01-01

    Background: Community-acquired pneumonia is the seventh leading cause of death in Canada. Previous studies have shown reductions in both mortality rate and length of hospital stay with the use of guideline-concordant empiric therapy and standardized preprinted orders. Objectives: The primary objective was to determine adherence to the preprinted order for community-acquired pneumonia at the University Hospital of Northern British Columbia (UHNBC). The study also had the following secondary objectives: to assess the appropriateness of prescribing of levofloxacin in relation to institutional recommendations; to determine adherence with recent guidelines from the Infectious Diseases Society of America (IDSA) and the American Thoracic Society (ATS) for the treatment of community-acquired pneumonia; and to determine all-cause mortality, duration of IV antibiotic therapy, and length of stay for the various regimens reviewed. Methods: A retrospective observational chart review was conducted of patients with community-acquired pneumonia who were admitted between November 2007 and February 2008. Exclusion criteria were designed to eliminate patients who did not have this condition. Descriptive statistics were used to assess adherence with the preprinted order. Secondary outcomes were analyzed with the Pearson χ2 test, t tests, and analysis of variance. Results: In total, the charts for 113 patients were reviewed, and 58 patients were included in the study. The preprinted order for community-acquired pneumonia was used for 25 (43%) of the 58 patients; however, for only 4 (7%) of these admissions were all sections of the preprinted order used correctly. No statistically significant differences in length of stay were found for any of the antibiotic combinations assessed. However, the proportion of patients treated according to the IDSA–ATS guidelines was significantly greater when the preprinted order was used (p = 0.012). In addition, use of the preprinted order encouraged

  10. Detection of Localized Heat Damage in a Polymer Matrix Composite by Thermo-Elastic Method (Preprint)

    Science.gov (United States)

    2007-02-01

    AFRL-ML-WP-TP-2007-437 DETECTION OF LOCALIZED HEAT DAMAGE IN A POLYMER MATRIX COMPOSITE BY THERMO-ELASTIC METHOD (PREPRINT) John Welter...GRANT NUMBER 4. TITLE AND SUBTITLE DETECTION OF LOCALIZED HEAT DAMAGE IN A POLYMER MATRIX COMPOSITE BY THERMO-ELASTIC METHOD (PREPRINT) 5c...Include Area Code) N/A Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39-18 1 DETECTION OF LOCALIZED HEAT DAMAGE IN A POLYMER MATRIX COMPOSITE BY

  11. Microstructure Evolution during Friction Stir Welding of Mill-Annealed Ti-6Al-4V (Preprint)

    Science.gov (United States)

    2011-05-01

    AFRL-RX-WP-TP-2011-4300 MICROSTRUCTURE EVOLUTION DURING FRICTION STIR WELDING OF MILL-ANNEALED Ti-6Al-4V (Preprint) A.L. Pilchak...DURING FRICTION STIR WELDING OF MILL-ANNEALED Ti-6Al-4V (Preprint) 5a. CONTRACT NUMBER In-House 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER...Transactions A. Document contains color. 14. ABSTRACT In this study, mill-annealed Ti-6Al-4V plates were successfully friction stir welded over a

  12. Online Information Searching Strategy Inventory (OISSI): A Quick Version and a Complete Version

    Science.gov (United States)

    Tsai, Meng-Jung

    2009-01-01

    This study developed an instrument to evaluate student online information searching strategies based on a framework comprising three domains and seven aspects. Two versions of the Online Information Searching Strategies Inventory (OISSI), including both quick and complete versions, were finally established and exhibited good validities and…

  13. Is there any measurable benefit in publishing preprints in the arXiv section Quantitative Biology?

    CERN Document Server

    Aman, Valeria

    2014-01-01

    A public preprint server such as arXiv allows authors to publish their manuscripts before submitting them to journals for peer review. It offers the chance to establish priority by making the results available upon completion. This article presents the arXiv section Quantitative Biology and investigates the advantages of preprint publications in terms of reception, which can be measured by means of citations. This paper focuses on the publication and citation delay, citation counts and the authors publishing their e-prints on arXiv. Moreover, the paper discusses the benefit for scientists as well as publishers. The results that are based on 12 selected journals show that submitting preprints to arXiv has become more common in the past few years, but the number of papers submitted to Quantitative Biology is still small and represents only a fraction of the total research output in biology. An immense advantage of arXiv is to overcome the long publication delay resulting from peer review. Although preprints are...

  14. Calibration and Rating of Photovoltaics: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Emery, K.

    2012-06-01

    Rating the performance of photovoltaic (PV) modules is critical to determining the cost per watt, and efficiency is useful to assess the relative progress among PV concepts. Procedures for determining the efficiency for PV technologies from 1-sun to low concentration to high concentration are discussed. We also discuss the state of the art in primary and secondary calibration of PV reference cells used by calibration laboratories around the world. Finally, we consider challenges to rating PV technologies and areas for improvement.

  15. Major Upgrades to the AIRS Version-6 Ozone Profile Methodology

    Science.gov (United States)

    Susskind, Joel; Blaisdell, John; Iredell, Lena

    2015-01-01

    This research is a continuation of part of what was shown at the last AIRS Science Team Meeting in the talk Improved Water Vapor and Ozone Profiles in SRT AIRS Version-6.X and the AIRS February 11, 2015 NetMeeting Further improvements in water vapor and ozone profiles compared to Version-6.AIRS Version-6 was finalized in late 2012 and is now operational. Version-6 contained many significant improvements in retrieval methodology compared to Version-5. However, Version-6 retrieval methodology used for the water vapor profile q(p) and ozone profile O3(p) retrievals is basically unchanged from Version-5, or even from Version-4. Subsequent research has made significant improvements in both water vapor and O3 profiles compared to Version-6. This talk will concentrate on O3 profile retrievals. Improvements in water vapor profile retrievals are given in a separate presentation.

  16. Versions Of Care Technology

    Directory of Open Access Journals (Sweden)

    Sampsa Hyysalo

    2007-01-01

    Full Text Available The importance of users for innovation has been increasingly emphasized in the literatures on design and management of technology. However, less attention has been given to how people shape technology-in-use. This paper first provides a review of literature on technology use in the social and cultural studies of technology. It then moves to examine empirically how a novel alarm and monitoring appliance was appropriated in the work of home-care nurses and in the everyday living of elderly people. Analysis shows that even these technically unsavvy users shaped the technology considerably by various, even if mundane, acts of adapting it materially, as well as by attributing different meanings to it. However, the paper goes on to argue that such commonplace phrasing of the findings obscures their significance and interrelations. Consequently, the final section of the paper reframes the key findings of this study using the concepts of practice, enactment, and versions of technology to reach a more adequate description.

  17. Mixed-Precision Spectral Deferred Correction: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Grout, Ray W. S.

    2015-09-02

    Convergence of spectral deferred correction (SDC), where low-order time integration methods are used to construct higher-order methods through iterative refinement, can be accelerated in terms of computational effort by using mixed-precision methods. Using ideas from multi-level SDC (in turn based on FAS multigrid ideas), some of the SDC correction sweeps can use function values computed in reduced precision without adversely impacting the accuracy of the final solution. This is particularly beneficial for the performance of combustion solvers such as S3D [6] which require double precision accuracy but are performance limited by the cost of data motion.

  18. Online Cake Cutting (published version)

    CERN Document Server

    Walsh, Toby

    2011-01-01

    We propose an online form of the cake cutting problem. This models situations where agents arrive and depart during the process of dividing a resource. We show that well known fair division procedures like cut-and-choose and the Dubins-Spanier moving knife procedure can be adapted to apply to such online problems. We propose some fairness properties that online cake cutting procedures can possess like online forms of proportionality and envy-freeness. We also consider the impact of collusion between agents. Finally, we study theoretically and empirically the competitive ratio of these online cake cutting procedures. Based on its resistance to collusion, and its good performance in practice, our results favour the online version of the cut-and-choose procedure over the online version of the moving knife procedure.

  19. On Final Version of Translation from the Perspective of Inter-subjectivity---A Case Study of Bible' s Translation%从主体间性看翻译有无“定本”--以《圣经》翻译为例

    Institute of Scientific and Technical Information of China (English)

    王晓燕; 徐晓娜

    2015-01-01

    主体间性本是一个哲学术语,但现已被应用到翻译学研究中,为翻译研究提供了一个新的研究视角。本文以《圣经》的翻译为例,探讨了翻译领域出现的有无“定本”问题。翻译无“定本”,不同译本的出现有其存在的必然性和必要性。复译对于翻译实践和翻译理论研究都有着积极的意义。%Inter-subjectivity, originally a philosophical has been applied in the study of translation, providing a new perspective for translation study. With Bible’s translation as a case, the topic that whether translation has final version is investigated. The authors point out that translation does not have a final version, and the emergences of dif-ferent translation versions have their inevitability and necessity of existence. At the same time, retranslation is of great significance to translation practice and translation theory research.

  20. Measuring Library Stability Through Historical Version Analysis

    NARCIS (Netherlands)

    Raemaekers, S.B.A.; Van Deursen, A.; Visser, J.

    2012-01-01

    Preprint of paper published in: ICSM 2012 - Proceedings of the IEEE International Conference on Software Maintenance, 23-28 September 2012; doi:10.1109/ICSM.2012.6405296 Backward compatibility is a major concern for any library developer. In this paper, we evaluate how stable a set of frequently us

  1. Versioning Complex Data

    Energy Technology Data Exchange (ETDEWEB)

    Macduff, Matt C.; Lee, Benno; Beus, Sherman J.

    2014-06-29

    Using the history of ARM data files, we designed and demonstrated a data versioning paradigm that is feasible. Assigning versions to sets of files that are modified with some special assumptions and domain specific rules was effective in the case of ARM data, which has more than 5000 datastreams and 500TB of data.

  2. Evaluating Tilt for Wind Farms: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Annoni, Jennifer; Scholbrock, Andrew; Churchfield, Matthew; Fleming, Paul

    2017-06-29

    The objective of this work is to demonstrate the feasibility of tilt in a wind plant. Tilt control, much like other wind plant control strategies, has the potential to improve the performance of a wind plant. Tilt control uses the tilt angle of the turbine to direct the wake above or below the downstream turbines. This paper presents a study of tilt in two- and threeturbine arrays. Specifically, the authors show that the power production of a two-turbine array can be increased by tilting turbines in a specific orientation. When adding more turbines, as is shown with the three-turbine array, the overall percentage of power gain increases. This outcome deviates from some of the results seen in typical wind plant control strategies. Finally, we discuss the impact this type of control strategy has on the aerodynamics in a wind plant. This analysis demonstrates that a good understanding of wake characteristics is necessary to improve the plant's performance. A tilt strategy such as the one presented in this paper may have implications for future control/optimization studies including optimization of hub heights in a wind plant and analysis of deep array effects.

  3. Error Quantification and Confidence Assessment of Aerothermal Model Predictions for Hypersonic Aircraft (Preprint)

    Science.gov (United States)

    2013-09-01

    88ABW-2012-1703; Clearance Date: 26 Mar 2012. This paper contains color . The final version of this conference paper was published in the...for Q4 are associated with Eckert’s reference temperature method, which is expected to consistently over-predict the true value due to the calorically

  4. Dictionaries for learners of English

    OpenAIRE

    Lew, Robert

    2016-01-01

    Author’s Original (Preprint) version of: Lew, Robert. 2016. “Dictionaries for learners of English”, Language Teaching 49, 2: 291–294. This version is more substantial than the final published version (which was cut down due to space budget constraints), so I recommend this version.

  5. Beams of Particles and Papers. The Role of Preprint Archives in High Energy Physics

    CERN Document Server

    Delfanti, Alessandro

    2016-01-01

    In high energy physics scholarly papers circulate primarily through online preprint archives based on a centralized repository, arXiv.org, that physicists simply refer to as 'the archive.' This is not a tool for preservation and memory, but rather a space of flows where written objects are detected and then disappear, and their authors made available for scrutiny. In this work I analyse the reading and publishing practices of two subsets of particle physicists, theorists and experimentalists. In order to be recognized as legitimate and productive members of their community, physicists need to abide by the temporalities and authorial practices structured by the archive. Theorists live in a state of accelerated time that shapes their reading and publishing practices around a 24 hour cycle. Experimentalists resolve to tactics that allow them to circumvent the slowed-down time and invisibility they experience as members of large collaborations. As digital archives for the exchange of preprint articles emerge in o...

  6. Version pressure feedback mechanisms for speculative versioning caches

    Science.gov (United States)

    Eichenberger, Alexandre E.; Gara, Alan; O& #x27; Brien, Kathryn M.; Ohmacht, Martin; Zhuang, Xiaotong

    2013-03-12

    Mechanisms are provided for controlling version pressure on a speculative versioning cache. Raw version pressure data is collected based on one or more threads accessing cache lines of the speculative versioning cache. One or more statistical measures of version pressure are generated based on the collected raw version pressure data. A determination is made as to whether one or more modifications to an operation of a data processing system are to be performed based on the one or more statistical measures of version pressure, the one or more modifications affecting version pressure exerted on the speculative versioning cache. An operation of the data processing system is modified based on the one or more determined modifications, in response to a determination that one or more modifications to the operation of the data processing system are to be performed, to affect the version pressure exerted on the speculative versioning cache.

  7. Safety: Special Effects of Thermal Runaway Chapter Heading for Encyclopedia of Electrochemical Power Sources (PREPRINT)

    Science.gov (United States)

    2007-11-09

    Safety: Special Effects of Thermal Runaway Chapter Heading for Encyclopedia of Electrochemical Power Sources Henry A. Catherino U.S. Army... Power Sources (PREPRINT) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Henry A. Catherino 5d. PROJECT NUMBER 5e...Electrochemical Power Sources ", The original document contains color images. 14. ABSTRACT Any system that stores energy has the potential of becoming a

  8. A Model for Estimating Nonlinear Deformation and Damage in Ceramic Matrix Composites (Preprint)

    Science.gov (United States)

    2011-07-01

    AFRL-RX-WP-TP-2011-4232 A MODEL FOR ESTIMATING NONLINEAR DEFORMATION AND DAMAGE IN CERAMIC MATRIX COMPOSITES (PREPRINT) Unni Santhosh and...5a. CONTRACT NUMBER In-house 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 62102F 6. AUTHOR(S) Unni Santhosh and Jalees Ahmad 5d. PROJECT...Composite Materials, 2010 A Model for Estimating Nonlinear Deformation and Damage in Ceramic Matrix Composites Unni Santhosh and Jalees Ahmad Research

  9. Thermo-Elastic Nondestructive Evaluation of Fatigue Damage in PMR-15 Resin (Preprint)

    Science.gov (United States)

    2011-11-01

    AFRL-RX-WP-TP-2011-4365 THERMO-ELASTIC NONDESTRUCTIVE EVALUATION OF FATIGUE DAMAGE IN PMR -15 RESIN (PREPRINT) J.T. Welter and E.A...Technical Paper 1 November 2011 – 1 November 2011 4. TITLE AND SUBTITLE THERMO-ELASTIC NONDESTRUCTIVE EVALUATION OF FATIGUE DAMAGE IN PMR -15 RESIN...largely been overlooked. In this paper we present studies of nondestructive evaluation of fatigue damage in a thermoset polyimide resin, PMR -15, performed

  10. Automated Identification and Characterization of Secondary & Tertiary gamma’ Precipitates in Nickel-Based Superalloys (PREPRINT)

    Science.gov (United States)

    2010-01-01

    METHODOLOGY A nickel-based superalloy sample (Rene88DT) was cut from a forged disc developed under a Defense Advanced Research Projects Agency funded...AFRL-RX-WP-TP-2010-4064 AUTOMATED IDENTIFICATION AND CHARACTERIZATION OF SECONDARY & TERTIARY γ’ PRECIPITATES IN NICKEL-BASED SUPERALLOYS ...AUTOMATED IDENTIFICATION AND CHARACTERIZATION OF SECONDARY & TERTIARY γ’ PRECIPITATES IN NICKEL-BASED SUPERALLOYS (PREPRINT) 5a. CONTRACT NUMBER In

  11. The virtual library in action: Collaborative international control of high-energy physics pre-print

    Energy Technology Data Exchange (ETDEWEB)

    Kreitz, P.A.; Addis, L.; Galic, H.; Johnson, T.

    1996-02-01

    This paper will discuss how control of the grey literature in high-energy physics pre-prints developed through a collaborative effort of librarians and physicists. It will highlight the critical steps in the development process and describe one model of a rapidly evolving virtual library for high-energy physics information. In conclusion, this paper will extend this physics model to other areas of grey literature management.

  12. Progress Towards AIRS Science Team Version-7 at SRT

    Science.gov (United States)

    Susskind, Joel; Blaisdell, John; Iredell, Lena; Kouvaris, Louis

    2016-01-01

    The AIRS Science Team Version-6 retrieval algorithm is currently producing level-3 Climate Data Records (CDRs) from AIRS that have been proven useful to scientists in understanding climate processes. CDRs are gridded level-3 products which include all cases passing AIRS Climate QC. SRT has made significant further improvements to AIRS Version-6. At the last Science Team Meeting, we described results using SRT AIRS Version-6.22. SRT Version-6.22 is now an official build at JPL called 6.2.4. Version-6.22 results are significantly improved compared to Version-6, especially with regard to water vapor and ozone profiles. We have adapted AIRS Version-6.22 to run with CrIS/ATMS, at the Sounder SIPS which processed CrIS/ATMS data for August 2014. JPL AIRS Version-6.22 uses the Version-6 AIRS tuning coefficients. AIRS Version-6.22 has at least two limitations which must be improved before finalization of Version-7: Version-6.22 total O3 has spurious high values in the presence of Saharan dust over the ocean; and Version-6.22 retrieved upper stratospheric temperatures are very poor in polar winter. SRT Version-6.28 addresses the first concern. John Blaisdell ran the analog of AIRS Version-6.28 in his own sandbox at JPL for the 14th and 15th of every month in 2014 and all of July and October for 2014. AIRS Version-6.28a is hot off the presses and addresses the second concern.

  13. RepoTREND. The program package for the integrated long term safety analysis of final repository systems. Version 4.5 (State March 2016); RepoTREND. Das Programmpaket zur integrierten Langzeitsicherheitsanalyse von Endlagersystemen. Version 4.5 (Stand Maerz 2016)

    Energy Technology Data Exchange (ETDEWEB)

    Reiche, Tatiana

    2016-04-15

    The long-term safety analysis is the analysis of final repository behavior after closure includes the spreading of pollutants into the biosphere (mobilization and release of pollutants into the near field, radionuclide migration through the geosphere, radiation exposure in the biosphere) and the radiological consequences. The report describes the program package RepoTREND, the respective modules (near field, GeoTREND, BioTREND and probabilistic analyses), sequencing and postprocessing and the quality management.

  14. Transfinite Version of Welter's Game

    OpenAIRE

    Abuku, Tomoaki

    2017-01-01

    We study the transfinite version of Welter's Game, a combinatorial game, which is played on the belt divided into squares with general ordinal numbers extended from natural numbers. In particular, we obtain a straight-forward solution for the transfinite version based on those of the transfinite version of Nim and the original version of Welter's Game.

  15. Enigma Version 12

    Science.gov (United States)

    Shores, David; Goza, Sharon P.; McKeegan, Cheyenne; Easley, Rick; Way, Janet; Everett, Shonn; Guerra, Mark; Kraesig, Ray; Leu, William

    2013-01-01

    Enigma Version 12 software combines model building, animation, and engineering visualization into one concise software package. Enigma employs a versatile user interface to allow average users access to even the most complex pieces of the application. Using Enigma eliminates the need to buy and learn several software packages to create an engineering visualization. Models can be created and/or modified within Enigma down to the polygon level. Textures and materials can be applied for additional realism. Within Enigma, these models can be combined to create systems of models that have a hierarchical relationship to one another, such as a robotic arm. Then these systems can be animated within the program or controlled by an external application programming interface (API). In addition, Enigma provides the ability to use plug-ins. Plugins allow the user to create custom code for a specific application and access the Enigma model and system data, but still use the Enigma drawing functionality. CAD files can be imported into Enigma and combined to create systems of computer graphics models that can be manipulated with constraints. An API is available so that an engineer can write a simulation and drive the computer graphics models with no knowledge of computer graphics. An animation editor allows an engineer to set up sequences of animations generated by simulations or by conceptual trajectories in order to record these to highquality media for presentation. Enigma Version 12 Lyndon B. Johnson Space Center, Houston, Texas 28 NASA Tech Briefs, September 2013 Planetary Protection Bioburden Analysis Program NASA's Jet Propulsion Laboratory, Pasadena, California This program is a Microsoft Access program that performed statistical analysis of the colony counts from assays performed on the Mars Science Laboratory (MSL) spacecraft to determine the bioburden density, 3-sigma biodensity, and the total bioburdens required for the MSL prelaunch reports. It also contains numerous

  16. AERONET Version 3 processing

    Science.gov (United States)

    Holben, B. N.; Slutsker, I.; Giles, D. M.; Eck, T. F.; Smirnov, A.; Sinyuk, A.; Schafer, J.; Rodriguez, J.

    2014-12-01

    The Aerosol Robotic Network (AERONET) database has evolved in measurement accuracy, data quality products, availability to the scientific community over the course of 21 years with the support of NASA, PHOTONS and all federated partners. This evolution is periodically manifested as a new data version release by carefully reprocessing the entire database with the most current algorithms that fundamentally change the database and ultimately the data products used by the community. The newest processing, Version 3, will be released in 2015 after the entire database is reprocessed and real-time data processing becomes operational. All V 3 algorithms have been developed, individually vetted and represent four main categories: aerosol optical depth (AOD) processing, inversion processing, database management and new products. The primary trigger for release of V 3 lies with cloud screening of the direct sun observations and computation of AOD that will fundamentally change all data available for analysis and all subsequent retrieval products. This presentation will illustrate the innovative approach used for cloud screening and assesses the elements of V3 AOD relative to the current version. We will also present the advances in the inversion product processing with emphasis on the random and systematic uncertainty estimates. This processing will be applied to the new hybrid measurement scenario intended to provide inversion retrievals for all solar zenith angles. We will introduce automatic quality assurance criteria that will allow near real time quality assured aerosol products necessary for real time satellite and model validation and assimilation. Last we will introduce the new management structure that will improve access to the data database. The current version 2 will be supported for at least two years after the initial release of V3 to maintain continuity for on going investigations.

  17. To check or not to check? An exploratory study on source checking by Dutch journalists. : [Preprint version

    NARCIS (Netherlands)

    Diekerhof, Els; Bakker, Piet

    2012-01-01

    Verifying information is one of the core activities of journalism. However, recent research shows that many stories derive from unchecked information from news agencies and PR material. That being said, reporters who do not use this pre-packaged material, but who instead produce original stories bas

  18. Nuflood, Version 1.x

    Energy Technology Data Exchange (ETDEWEB)

    2016-07-29

    NUFLOOD Version 1.x is a surface-water hydrodynamic package designed for the simulation of overland flow of fluids. It consists of various routines to address a wide range of applications (e.g., rainfall-runoff, tsunami, storm surge) and real time, interactive visualization tools. NUFLOOD has been designed for general-purpose computers and workstations containing multi-core processors and/or graphics processing units. The software is easy to use and extensible, constructed in mind for instructors, students, and practicing engineers. NUFLOOD is intended to assist the water resource community in planning against water-related natural disasters.

  19. TOGAF version 9

    CERN Document Server

    Group, The Open

    2010-01-01

    This is the official Open Group Pocket Guide for TOGAF Version 9 Enterprise Edition. This pocket guide is published by Van Haren Publishing on behalf of The Open Group.TOGAF, The Open Group Architectural Framework is a fast growing, worldwide accepted standard that can help organisations build their own Enterprise Architecture in a standardised way. This book explains why the in?s and out?s of TOGAF in a concise manner.This book explains how TOGAF can help to make an Enterprise Architecture. Enterprise Architecture is an approach that can help management to understand this growing complexity.

  20. Polyhedral Oligomeric Silsesquioxane (POSS) Polyimides as Space-Survivable Materials (Preprint)

    Science.gov (United States)

    2006-07-27

    Survivable Materials (Preprint) 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER Sandra J. Tomczak (AFRL/PRSM...Multiple samples of Kapton H®, 8.75 % Si8O11 MC-POSS PI, and silica-coated Kapton HN® (provided by Astral Technology Unlimited, Inc. Lot No. 00625-007...self-passivation experiment. (a.) Kapton H®, (b.) SiO2 coated Kapton HN® (Provided by Astral Industries Inc.), and (c.) 8.75 wt % Si8O11 cage MC

  1. Optical Manipulation and Defect Creation in a Liquid Crystal on a Photo Responsive Surface (Preprint)

    Science.gov (United States)

    2017-01-25

    optical tweezers . Optics Express. 19, 24320 (2011). 7. M. Carrascosa, A. García-Cabañes, M. Jubera, J. B. Ramiro, F. Agulló-López, LiNbO3: A photovoltaic...AFRL-RX-WP-JA-2017-0236 OPTICAL MANIPULATION AND DEFECT CREATION IN A LIQUID CRYSTAL ON A PHOTO RESPONSIVE SURFACE (PREPRINT...December 2016 Interim 26 October 2015 – 16 November 2016 4. TITLE AND SUBTITLE OPTICAL MANIPULATION AND DEFECT CREATION IN A LIQUID CRYSTAL ON A

  2. URGENCES NOUVELLE VERSION

    CERN Multimedia

    Medical Service

    2002-01-01

    The table of emergency numbers that appeared in Bulletin 10/2002 is out of date. The updated version provided by the Medical Service appears on the following page. Please disregard the previous version. URGENT NEED OF A DOCTOR GENEVAPATIENT NOT FIT TO BE MOVED: Call your family doctor Or SOS MEDECINS (24H/24H) 748 49 50 Or ASSOC. OF GENEVA DOCTORS (7H-23H) 322 20 20 PATIENT CAN BE MOVED: HOPITAL CANTONAL 24 Micheli du Crest 372 33 11 382 33 11 CHILDREN'S HOSPITAL 6 rue Willy Donzé 382 68 18 382 45 55 MATERNITY 24 Micheli du Crest 382 68 16 382 33 11 OPHTALMOLOGY 22 Alcide Jentzer 382 84 00 HOPITAL DE LA TOUR Meyrin 719 61 11 CENTRE MEDICAL DE MEYRIN Champs Fréchets 719 74 00 URGENCES : FIRE BRIGADE 118 FIRE BRIGADE CERN 767 44 44 BESOIN URGENT D'AMBULANCE (GENEVE ET VAUD) : 144 POLICE 117 ANTI-POISON CENTRE 24H/24H 01 251 51 510 EUROPEAN EMERGENCY CALL: 112 FRANCE PATIENT NOT FIT TO BE MOVED: call your family doctor PATIENT CAN BE MOVED: ST. JULIE...

  3. 280---14 Dec 2009 [Final version].indd

    African Journals Online (AJOL)

    2009-12-14

    Dec 14, 2009 ... how the WARC has taken the lead in the ecumenical movement by engaging a ... the covenant as a 'treaty of allegiance' and argues that these social and ... future is articulated as follows: 'But if the world is to be changed,.

  4. 434-20 July 2009.indd [Final version].indd

    African Journals Online (AJOL)

    2009-07-20

    Jul 20, 2009 ... ... integral components. This strategy has taken the form of complex real and/or ... environments where integration of theory and practice should occur. According to ... This demand has led to a paradigm shift in nursing education from the ..... I think it should be done with all the subjects especially Midwifery;.

  5. 321--14 Dec 2009. [final VERSION].indd

    African Journals Online (AJOL)

    2009-12-14

    Dec 14, 2009 ... excellence', and 'the resistance to any hierarchy that oppresses unjustly' ...... a change of conventional hierarchies that favour the privileged. It restores the lost dignity ... economic policies that serve self-interest. To those who ...

  6. 305---14Dec .indd [ final version].indd

    African Journals Online (AJOL)

    2007-01-19

    Jan 19, 2007 ... He was standing right where he had closed his eyes, but the shack was gone . ... “Truly,” came the voice of Sarayu from out of the light. “Now, ... “We are not only able to see the uniqueness of one another in color and light, but ...

  7. 281-- 14 Dec 2009--[ Final VERSION].indd

    African Journals Online (AJOL)

    2009-12-14

    Dec 14, 2009 ... example is the role of Bonhoeffer in the resistance against Hitler which resulted in an ethical ... causes of the misery as well as possible strategies to overcome .... On the level of the state such assessment and change do take.

  8. 325-- 11 Dec 2009 [ Final version].indd

    African Journals Online (AJOL)

    2009-12-11

    Dec 11, 2009 ... both to humanity and to the rest of creation, so that we may all achieve fullness of life. This .... This then involves a system of governance/regulation of the ... also regulates body temperature; carries nutrients and oxygen.

  9. DMP: Simple, Scalable, and Submerged; FINAL TECHNICAL REPORT (REDACTED VERSION)

    Energy Technology Data Exchange (ETDEWEB)

    Morrow, Mike; Delos-Reyes, Michael; McNatt, Cameron; Ozkan-Haller, Tuba; Klure, Justin; Kopf, Steven; Ai, Zhuan; Cleary, Casey; Goold, Caitlin; Vanithbuncha, Phattharawan

    2012-02-08

    At the start of work by M3 Wave under the current DOE funding, the DMP technology was nominally at TRL2 with some physical model testing completed. With DOE and OWET funding, much progress was made on several fronts including: cost of energy modeling, 1:50 scale model testing, numerical modeling, site evaluation, cost of mooring, construction, operations and maintenance, regulatory, and power take off. Since the technology is stationary on the ocean floor, arrays can be very dense. Even though overall efficiency is lower than buoys, the total power per acre of the technology looks to be at least twice the output per acre of known buoy WEC technologies. If the assumptions and inputs are correct, then DMP ocean power devices could be commercially competitive with other offshore renewable energy resources, such as off-shore wind power. Leveraging the data, analysis, and engineering conducted on this project, larger 1:6 scale testing was recently completed under separate funding. All aspects tested at 1:6 suggest that the DMP is a viable and disruptive technology, leading M3 Wave to continue development of the DMP.

  10. 464---07 Oct 2009 [Final version].indd

    African Journals Online (AJOL)

    2009-10-07

    Oct 7, 2009 ... timeously, according to priorities potentially disabling injuries ... The Cape Triage Score (algorithm or assessment tool) uses the following colour codes: ... determine the core competencies of the nurse in the triage. • of patients ..... assessed/referred faster, nurses' unbalanced workloads, unsafe. TABLE 1.

  11. 454--03 aug 2009.indd (final version).indd

    African Journals Online (AJOL)

    2009-08-03

    Aug 3, 2009 ... Activities such as this are important in heightening awareness of obesity in ... lifestyles characterised by over-nutrition and reduced physical activity, culminating in a positive energy ... The rapid worldwide increase in childhood obesity is a challenge ..... one in independent schools (South Africa.info 2006).

  12. 161---8 Dec 2009.indd [final version].indd

    African Journals Online (AJOL)

    2009-12-08

    Dec 8, 2009 ... (page number not for citation purposes) ... the one hand, extraverts are orientated toward the outer world: they are ... possibilities of a situation, perceiving meanings and relationships. ... dominant intuitives may struggle with sensing; dominant .... judging process is concerned with evaluating information and.

  13. FINAL VERSION OF CAPITALIZM: ECONOMIC INTELLIGENCE IN KNOWLEDGE ECONOMY

    OpenAIRE

    2015-01-01

    Today’s advanced economies which became a knowledge economy have witnessed to important structural variations since the recent past and pioneer sectors of economic activities create basic characteristics of this change. In this process, industrial economy based on natural resources and labor force has switched over agricultural economy accepted as a main production factor and knowledge based economy has taken its place by means of becoming knowledge a major factor among production factors. Kn...

  14. 186---07 Sep 2009 [Final version].indd

    African Journals Online (AJOL)

    2009-09-07

    Sep 7, 2009 ... because of its excessive relativism, which sees everything as relational. ..... metaphysics is a product of the will to power and arises from the human 'desire to own one's ... possibility to falsify, remains an option that people can exercise and that affirms the ..... Death is neither hard nor bad. Only the dying ...

  15. 466-Sabelo-28 Aug 2009.indd [Final version].indd

    African Journals Online (AJOL)

    2009-08-28

    Aug 28, 2009 ... Persons with ART-resistant strains of HIV can spread these to other people, requiring ... patients' ART adherence was influenced by service-related and patient-related factors. ..... process of analysis, two major data categories, namely patient- ... had completed HIV/AIDS training and 10 (62.6%) nurses had.

  16. 275---11 Dec 2009 [Final version].indd

    African Journals Online (AJOL)

    11 Des 2009 ... Alfred R. Brunsdon1. Affiliation: ... Alfred R. Brunsdon e-mail: ... (Kübler-Ross 1969; Spiegel 1977), of as naasbestaandes nie meer patologiese rou toon nie. ..... (Beasley-Murray 1999:190), maar hulle vervul ongetwyfeld 'n.

  17. 283---14 Dec 2009 [ Final version].indd

    African Journals Online (AJOL)

    2009-12-14

    Dec 14, 2009 ... of the power imbalances in these institutions, rules are made that ... unemployment as a social problem but rather as a beneficial ... admitted this when she said the following about challenges facing ... advancement as the factors driving globalisation while ..... Elite theory proposes that not only are liberal.

  18. 136 --7 Dec 2009.indd [FINAL VERSION].indd

    African Journals Online (AJOL)

    7 Des 2009 ... Die Ou Testament bevat aanduidings van teregstelling op die. Oosterse manier ...... How to interpret the Bible: A do-it-yourself manual, pp. 127–142 ... The new international dictionary of the New Testament theology, vol. 1, pp.

  19. Final Evaluation Report of Top Secret Version 3.0,

    Science.gov (United States)

    2008-03-21

    evaluation is an in-depth examination of design plans . As with the preliminary assessment, no "hands- on" testing is required for a developmental...real storage location is fetch protected, the key in sto.age is compared to the key associated w1th the request and the resulting accion is dependent...Documentation Requirement: The system developer shall provide to the evaluators a docua;ent that describes the test plan and results of the security

  20. 150--9 Dec 2009.indd [Final version].indd

    African Journals Online (AJOL)

    2009-12-09

    Dec 9, 2009 ... Robberies in businesses increased by 47,4% to 9 862 cases.2. It should not be .... political science, ethics, philosophy and social work (Wellman. 1975:5). ..... Moore, S. et al., 1995, The postmodern Bible. The Bible and.

  1. Amyris, Inc. Integrated Biorefinery Project Summary Final Report - Public Version

    Energy Technology Data Exchange (ETDEWEB)

    Gray, David; Sato, Suzanne; Garcia, Fernando; Eppler, Ross; Cherry, Joel

    2014-03-12

    The Amyris pilot-scale Integrated Biorefinery (IBR) leveraged Amyris synthetic biology and process technology experience to upgrade Amyris’s existing Emeryville, California pilot plant and fermentation labs to enable development of US-based production capabilities for renewable diesel fuel and alternative chemical products. These products were derived semi-synthetically from high-impact biomass feedstocks via microbial fermentation to the 15-carbon intermediate farnesene, with subsequent chemical finishing to farnesane. The Amyris IBR team tested and provided methods for production of diesel and alternative chemical products from sweet sorghum, and other high-impact lignocellulosic feedstocks, at pilot scale. This enabled robust techno-economic analysis (TEA), regulatory approvals, and a basis for full-scale manufacturing processes and facility design.

  2. 151---8 Dec 2009.indd [ Final version].indd

    African Journals Online (AJOL)

    2009-12-08

    Dec 8, 2009 ... Matthew's treatment of (1) the disciples, (2) James and the relatives of Jesus, (3). Peter and (4) anti-Pauline ... While I agree with. Sim to an extent, ..... parable about the children and dogs (15:24, 26), she acknowledged her ...

  3. 308 --- 16 Dec 2009 [ final version].indd

    African Journals Online (AJOL)

    2009-12-16

    Dec 16, 2009 ... (page number not for citation purposes). INTERPRETING THE ... This article proposes a methodology for interpreting the parables of Jesus. ... is argued that social-scientific criticism presents itself as the obvious line of approach. Operating ..... structures of the parables in the process of interpretation? Can.

  4. 309 ----10 Dec 2009 [Final version].indd

    African Journals Online (AJOL)

    2009-12-10

    Dec 10, 2009 ... (page number not for citation purposes) ... This article presents a social-scientific interpretation of the parable of ... How to cite this article: ...... This structure preserves the unity of the dialogue, a unity that is evidenced by the.

  5. 319----14 Dec 2009.indd [Final version].indd

    African Journals Online (AJOL)

    2009-12-14

    Dec 14, 2009 ... are merely current illustrations of an ongoing and global reality. Furthermore, the .... sit on Moses' seat; therefore, do whatever they teach you and follow it . ...... a framing device that forms a virtual but penultimate 'inclusio'.

  6. Cry from Inspiration, Close to Isolation A Phonetic Rhetoric Analysis on the First and the Final Sentence in the Rabassa ’ s English Version of One Hundred Years of Solitude%神来呼唤,孤寂而去--《百年孤独》拉巴萨英译本首尾句语音修辞的妙用

    Institute of Scientific and Technical Information of China (English)

    欧燕

    2016-01-01

    《百年孤独》是一部绝世经典之作,其首尾句的拉巴萨英译本妙笔生花,精致唯美,蕴含着独特乐感和情感,颇令人称道,极具文学价值。运用文体学理论,聚焦这一英译本首尾句音韵妙用和由其衍生的情意展现,分析其绝妙的语音修辞感染力。%"One Hundred Years of Solitude"is a classic masterpiece written by the most famous Latin A-merican novelist Garcia Marquez , which recently drastically catch people ’ s eyes shortly after the writer ’ s death.The first and the final sentences of this novel in the Rabassa ’ s English Version are very delicate and elegant with its apt and smart writing skills and unique in both pronunciation and emotion , which receives wide popularity and its literary value deserves researches .Based on the theory of stylistics , this paper focuses on the phonetic rhetoric of the two sentences to analyze how the phonological features and emotions derived from the features rise up the splendid expressiveness .

  7. Generating Version Convertors for Domain-Specific Languages

    NARCIS (Netherlands)

    De Geest, G.; Vermolen, S.D.; Van Deursen, A.; Visser, E.

    2008-01-01

    Preprint of paper published in: WCRE 2008 - 15th Working Conference on Reverse Engineering, 15-18 October 2008; doi:10.1109/WCRE.2008.50 Domain-specific languages (DSLs) improve programmer productivity by providing high-level abstractions for the development of applications in a particular domain.

  8. Cryptanalysis of Achterbahn-Version 1 and -Version 2

    Institute of Scientific and Technical Information of China (English)

    Xiao-Li Huang; Chuan-Kun Wu

    2007-01-01

    Achterbahn is one of the candidate stream ciphers submitted to the eSTREAM, which is the ECRYPT StreamCipher Project. The cipher Achterbahn uses a new structure which is based on several nonlinear feedback shift registers(NLFSR) and a nonlinear combining output Boolean function. This paper proposes distinguishing attacks on Achterbahn-Version 1 and -Version 2 on the reduced mode and the full mode. These distinguishing attacks are based on linear approxi-mations of the output functions. On the basis of these linear approximations and the periods of the registers, parity checkswith noticeable biases are found. Then distinguishing attacks can be achieved through these biased parity checks. As toAchterbahn-Version 1, three cases that the output function has three possibilities are analyzed. Achterbahn-Version 2, themodification version of Achterbahn-Version 1, is designed to avert attacks based on approximations of the output Booleanfunction. Our attack with even much lower complexities on Achterbahn-Version 2 shows that Achterbahn-Version 2 cannotprevent attacks based on linear approximations.

  9. GNU Octave Manual Version 3

    DEFF Research Database (Denmark)

    W. Eaton, John; Bateman, David; Hauberg, Søren

    This manual is the definitive guide to GNU Octave, an interactive environment for numerical computation. The manual covers the new version 3 of GNU Octave.......This manual is the definitive guide to GNU Octave, an interactive environment for numerical computation. The manual covers the new version 3 of GNU Octave....

  10. On the Effect of Antimony Segregation to the Electronic Properties of InAs/InAsSb Superlattices (Preprint)

    Science.gov (United States)

    2017-01-03

    AFRL-RX-WP-JA-2017-0231 ON THE EFFECT OF ANTIMONY SEGREGATION TO THE ELECTRONIC PROPERTIES OF INAS/INASSB SUPERLATTICES (PREPRINT...December 2016 Interim 11 September 2013 – 12 November 2016 4. TITLE AND SUBTITLE ON THE EFFECT OF ANTIMONY SEGREGATION TO THE ELECTRONIC ...AUTHOR(S) H. J. Haugan, F. Szmulowicz, J. J. Hudgins, L. E. Cordonnier, and G. J. Brown - AFRL/RX 5d. PROJECT NUMBER 4348 5e. TASK

  11. brulilo, Version 0.x

    Energy Technology Data Exchange (ETDEWEB)

    2015-04-16

    effectively remove some of the stiffness and allow for efficient explicit integration techniques to be used. The original intent of brulilo was to implement these stiffness-alleviating techniques with explicit integrators and compare the performance to traditional implicit integrations of the full stiff system. This is still underway, as the code is very much in an alpha-release state. Furthermore, explicit integrators are often much easier to parallelize than their implicit counterparts. brulilo will implement parallelization of these techniques, leveraging both the Python implementation of MPI, mpi4py, as well as highly parallelized versions targeted at GPUs with PyOpenCL and/or PyCUDA.

  12. EPICS Version 4 - Implementing Complex Data Types

    Energy Technology Data Exchange (ETDEWEB)

    Marty Kraimer,; John dalesio

    2012-11-27

    Through phase 1 and phase 2 SBIR grants, s fully functional I/O Controller and communication protocol for version 4 of EPICS is completed. This new software architecture provides a flexible and extendible architecture. Version 4 is implemented fully in Java. The performance metrics look promising. The final portion of phase 2 is to optimize the communication mechanisms. Subsequent work on different aspects of this are required to provide a viable solutions in various areas. Version 3 of EPICS is able to provide a platform for implementing channel based control, because the channel and attributes for time stamping, alarm, display and control were narrow, well defined, and complete. To extend EPICS functionality beyond this, it is necessary to define attributes needed for archive data, array, image data, and directory services. The proper handling of several array types enables the development of middle layer servers such as orbit and bump control in accelerators. Phase 1 should produce a well defined, reviewed, and agreed upon definition of the metadata required for these services. A Phase 2 grant would provide tools that implemented archiving, general array, imaging, and directory applications.

  13. Note on: Considering the Case for Biodiversity Cycles: Reexamining the Evidence for Periodicity in the Fossil Record, by Lieberman and Melott, arXiv preprint 0704.2896

    CERN Document Server

    Omerbashich, M

    2007-01-01

    Lieberman and Melott built their recent arXiv preprint 0704.2896 on my published paper and (a preprint of) a subsequent comment by Liebermans associate Cornette. But had this group waited for the Cornette comment to actually appear in print together with the expected Reply, they would have learned that his comment exposes Cornettes confusion that likely was due to journal misprint of my figure. Thus 0704.2896 is baseless. Despite receiving the extended Reply with Errata, these authors still fail to recognize that detrending of paleontological records-which they erroneously promote as a must-is an arbitrary rather than a universal operation.

  14. Agile Thermal Management STT-RX. Catalytic Influence of Ni-based Additives on the Dehydrogentation Properties of Ball Milled MgH2 (PREPRINT)

    Science.gov (United States)

    2011-12-01

    milled MgH2 (PREPRINT) Patrick J. Shamberger, Jonathan E. Spowart, and Andrey A. Voevodin Thermal Sciences & Materials Branch Placidus B...the dehydrogentation properties of ball milled MgH2 (PREPRINT) 5a. CONTRACT NUMBER In-house 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 62102F...LaNi5 on the dehydrogenation properties of milled MgH2 , was investigated. MgH2 milled in the presence of Ni (5wt%) and Zr2Ni5 (5wt%) catalysts for 2 h

  15. MULTIPLE PROJECTIONS SYSTEM (MPS) - USER'S MANUAL VERSION 1.0

    Science.gov (United States)

    The report is a user's manual for version 1.0 of the Multiple Projections Systems (MPS), a computer system that can perform "what if" scenario analysis and report the final results (i.e., Rate of Further Progress - ROP - inventories) to EPA (i.e., the Aerometric Information Retri...

  16. Version Description and Installation Guide Kernel Version 3.0

    Science.gov (United States)

    1989-12-01

    approved for publication. FOR THE COMMANDER Karl H. Shingler SEI Joint Program Office This work is sponsored by the U.S. Department of Defense. Copyright...8217version’ * $ append/new-version tcl .lis,tc2. lise ,t3 .lis,tc4.lis - [dark -cm. dcc. vdiq]contents -of -’version’ $ delete tcl.lis;,tc2.lis;,tc3.lis...INOIVIOUAL 22b. TELEPHONE NUMBER 22c. OFFICE SYMBOL KARL H. SHINGLER (include A’a Code) 1, 412 268-7630 SEI JPO 00 FORM 1473.83 APR EITION OF JAN 73 IS OBSOLETE. I i SECURITY CLASSIFICATION OF THIS PAGE

  17. GENII Version 2 Users’ Guide

    Energy Technology Data Exchange (ETDEWEB)

    Napier, Bruce A.

    2004-03-08

    The GENII Version 2 computer code was developed for the Environmental Protection Agency (EPA) at Pacific Northwest National Laboratory (PNNL) to incorporate the internal dosimetry models recommended by the International Commission on Radiological Protection (ICRP) and the radiological risk estimating procedures of Federal Guidance Report 13 into updated versions of existing environmental pathway analysis models. The resulting environmental dosimetry computer codes are compiled in the GENII Environmental Dosimetry System. The GENII system was developed to provide a state-of-the-art, technically peer-reviewed, documented set of programs for calculating radiation dose and risk from radionuclides released to the environment. The codes were designed with the flexibility to accommodate input parameters for a wide variety of generic sites. Operation of a new version of the codes, GENII Version 2, is described in this report. Two versions of the GENII Version 2 code system are available, a full-featured version and a version specifically designed for demonstrating compliance with the dose limits specified in 40 CFR 61.93(a), the National Emission Standards for Hazardous Air Pollutants (NESHAPS) for radionuclides. The only differences lie in the limitation of the capabilities of the user to change specific parameters in the NESHAPS version. This report describes the data entry, accomplished via interactive, menu-driven user interfaces. Default exposure and consumption parameters are provided for both the average (population) and maximum individual; however, these may be modified by the user. Source term information may be entered as radionuclide release quantities for transport scenarios, or as basic radionuclide concentrations in environmental media (air, water, soil). For input of basic or derived concentrations, decay of parent radionuclides and ingrowth of radioactive decay products prior to the start of the exposure scenario may be considered. A single code run can

  18. Twenty-Fifth Annual Audio-Visual Aids Conference, Wednesday 9th to Friday 11th July 1975, Whitelands College, Putney SW15. Conference Preprints.

    Science.gov (United States)

    National Committee for Audio-Visual Aids in Education, London (England).

    Preprints of papers to be presented at the 25th annual Audio-Visual Aids Conference are collected along with the conference program. Papers include official messages, a review of the conference's history, and presentations on photography in education, using school broadcasts, flexibility in the use of television, the "communications generation,"…

  19. Results from CrIS/ATMS Obtained Using an AIRS "Version-6 like" Retrieval Algorithm

    Science.gov (United States)

    Susskind, Joel; Kouvaris, Louis; Iredell, Lena

    2015-01-01

    We tested and evaluated Version-6.22 AIRS and Version-6.22 CrIS products on a single day, December 4, 2013, and compared results to those derived using AIRS Version-6. AIRS and CrIS Version-6.22 O3(p) and q(p) products are both superior to those of AIRS Version-6All AIRS and CrIS products agree reasonably well with each other. CrIS Version-6.22 T(p) and q(p) results are slightly poorer than AIRS over land, especially under very cloudy conditions. Both AIRS and CrIS Version-6.22 run now at JPL. Our short term plans are to analyze many common months at JPL in the near future using Version-6.22 or a further improved algorithm to assess the compatibility of AIRS and CrIS monthly mean products and their interannual differences. Updates to the calibration of both CrIS and ATMS are still being finalized. JPL plans, in collaboration with the Goddard DISC, to reprocess all AIRS data using a still to be finalized Version-7 retrieval algorithm, and to reprocess all recalibrated CrISATMS data using Version-7 as well.

  20. Brazilian version of the Berg balance scale

    Directory of Open Access Journals (Sweden)

    Miyamoto S.T.

    2004-01-01

    Full Text Available The purpose of the present study was to translate and adapt the Berg balance scale, an instrument for functional balance assessment, to Brazilian-Portuguese and to determine the reliability of scores obtained with the Brazilian adaptation. Two persons proficient in English independently translated the original scale into Brazilian-Portuguese and a consensus version was generated. Two translators performed a back translation. Discrepancies were discussed and solved by a panel. Forty patients older than 65 years and 40 therapists were included in the cultural adaptation phase. If more than 15% of therapists or patients reported difficulty in understanding an item, that item was reformulated and reapplied. The final Brazilian version was then tested on 36 elderly patients (over age 65. The average age was 72 years. Reliability of the measure was assessed twice by one physical therapist (1-week interval between assessments and once by one independent physical therapist. Descriptive analysis was used to characterize the patients. The intraclass correlation coefficient (ICC and Pearson's correlation coefficient were computed to assess intra- and interobserver reliability. Six questions were modified during the translation stage and cultural adaptation phase. The ICC for intra- and interobserver reliability was 0.99 (P < 0.001 and 0.98 (P < 0.001, respectively. The Pearson correlation coefficient for intra- and interobserver reliability was 0.98 (P < 0.001 and 0.97 (P < 0.001, respectively. We conclude that the Brazilian version of the Berg balance scale is a reliable instrument to be used in balance assessment of elderly Brazilian patients.

  1. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Gurney, Kevin R

    2015-01-12

    This document constitutes the final report under DOE grant DE-FG-08ER64649. The organization of this document is as follows: first, I will review the original scope of the proposed research. Second, I will present the current draft of a paper nearing submission to Nature Climate Change on the initial results of this funded effort. Finally, I will present the last phase of the research under this grant which has supported a Ph.D. student. To that end, I will present the graduate student’s proposed research, a portion of which is completed and reflected in the paper nearing submission. This final work phase will be completed in the next 12 months. This final workphase will likely result in 1-2 additional publications and we consider the results (as exemplified by the current paper) high quality. The continuing results will acknowledge the funding provided by DOE grant DE-FG-08ER64649.

  2. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    DeTar, Carleton [P.I.

    2012-12-10

    This document constitutes the Final Report for award DE-FC02-06ER41446 as required by the Office of Science. It summarizes accomplishments and provides copies of scientific publications with significant contribution from this award.

  3. Brazilian version of the Berg balance scale.

    Science.gov (United States)

    Miyamoto, S T; Lombardi Junior, I; Berg, K O; Ramos, L R; Natour, J

    2004-09-01

    The purpose of the present study was to translate and adapt the Berg balance scale, an instrument for functional balance assessment, to Brazilian-Portuguese and to determine the reliability of scores obtained with the Brazilian adaptation. Two persons proficient in English independently translated the original scale into Brazilian-Portuguese and a consensus version was generated. Two translators performed a back translation. Discrepancies were discussed and solved by a panel. Forty patients older than 65 years and 40 therapists were included in the cultural adaptation phase. If more than 15% of therapists or patients reported difficulty in understanding an item, that item was reformulated and reapplied. The final Brazilian version was then tested on 36 elderly patients (over age 65). The average age was 72 years. Reliability of the measure was assessed twice by one physical therapist (1-week interval between assessments) and once by one independent physical therapist. Descriptive analysis was used to characterize the patients. The intraclass correlation coefficient (ICC) and Pearson's correlation coefficient were computed to assess intra- and interobserver reliability. Six questions were modified during the translation stage and cultural adaptation phase. The ICC for intra- and interobserver reliability was 0.99 (P Berg balance scale is a reliable instrument to be used in balance assessment of elderly Brazilian patients.

  4. Converge, Version 3.0

    Directory of Open Access Journals (Sweden)

    Lotfi Tadj

    1993-01-01

    Full Text Available Although intended for college teachers/students, Converge presents a feature that may interest all scientists: it allows an easy export of graphic files to most known word processors, specifically to the ℙ, Version 2.1, a powerful WYSIWYG mathematical word processor.

  5. Final Report

    DEFF Research Database (Denmark)

    Heiselberg, Per; Brohus, Henrik; Nielsen, Peter V.

    This final report for the Hybrid Ventilation Centre at Aalborg University describes the activities and research achievement in the project period from August 2001 to August 2006. The report summarises the work performed and the results achieved with reference to articles and reports published...

  6. Constructive version of Boolean algebra

    CERN Document Server

    Ciraulo, Francesco; Toto, Paola

    2012-01-01

    The notion of overlap algebra introduced by G. Sambin provides a constructive version of complete Boolean algebra. Here we first show some properties concerning overlap algebras: we prove that the notion of overlap morphism corresponds classically to that of map preserving arbitrary joins; we provide a description of atomic set-based overlap algebras in the language of formal topology, thus giving a predicative characterization of discrete locales; we show that the power-collection of a set is the free overlap algebra join-generated from the set. Then, we generalize the concept of overlap algebra and overlap morphism in various ways to provide constructive versions of the category of Boolean algebras with maps preserving arbitrary existing joins.

  7. Major Upgrades to the AIRS Version-6 Water Vapor Profile Methodology

    Science.gov (United States)

    Susskind, Joel; Blaisdell, John; Iredell, Lena; Lee, Jae N.

    2015-01-01

    Additional changes in Version-6.19 include all previous updates made to the q(p) retrieval since Version-6: Modified Neural-Net q0(p) guess above the tropopause Linearly tapers the neural net guess to match climatology at 70 mb, not at the top of the atmosphereChanged the 11 trapezoid q(p) perturbation functions used in Version-6 so as to match the 24 functions used in T(p) retrieval step. These modifications resulted in improved water vapor profiles in Version-6.19 compared to Version-6.Version-6.19 is tested for all of August 2013 and August 2014, as well for select other days. Before finalized and operational in 2016, the V-6.19 can be acquired upon request for limited time intervals.

  8. Systematic Approach to Better Understanding Integration Costs: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Stark, Gregory B.

    2015-09-28

    When someone mentions integration costs, thoughts of the costs of integrating renewable generation into an existing system come to mind. We think about how variability and uncertainty can increase power system cycling costs as increasing amounts of wind or solar generation are incorporated into the generation mix. However, seldom do we think about what happens to system costs when new baseload generation is added to an existing system or when generation self-schedules. What happens when a highly flexible combined-cycle plant is added? Do system costs go up, or do they go down? Are other, non-cycling, maintenance costs impacted? In this paper we investigate six technologies and operating practices--including VG, baseload generation, generation mix, gas prices, self-scheduling, and fast-start generation--and how changes in these areas can impact a system's operating costs. This paper provides a working definition of integration costs and four components of variable costs. It describes the study approach and how a production cost modeling-based method was used to determine the cost effects, and, as a part of the study approach section, it describes the test system and data used for the comparisons. Finally, it presents the research findings, and, in closing, suggests three areas for future work.

  9. Development and Validation of a New Blade Element Momentum Skewed-Wake Model within AeroDyn: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Ning, S. A.; Hayman, G.; Damiani, R.; Jonkman, J.

    2014-12-01

    Blade element momentum methods, though conceptually simple, are highly useful for analyzing wind turbines aerodynamics and are widely used in many design and analysis applications. A new version of AeroDyn is being developed to take advantage of new robust solution methodologies, conform to a new modularization framework for National Renewable Energy Laboratory's FAST, utilize advanced skewed-wake analysis methods, fix limitations with previous implementations, and to enable modeling of highly flexible and nonstraight blades. This paper reviews blade element momentum theory and several of the options available for analyzing skewed inflow. AeroDyn implementation details are described for the benefit of users and developers. These new options are compared to solutions from the previous version of AeroDyn and to experimental data. Finally, recommendations are given on how one might select from the various available solution approaches.

  10. Life Prediction Model for Grid-Connected Li-ion Battery Energy Storage System: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Kandler A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Saxon, Aron R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Keyser, Matthew A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Lundstrom, Blake R [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-25

    Life Prediction Model for Grid-Connected Li-ion Battery Energy Storage System: Preprint Lithium-ion (Li-ion) batteries are being deployed on the electrical grid for a variety of purposes, such as to smooth fluctuations in solar renewable power generation. The lifetime of these batteries will vary depending on their thermal environment and how they are charged and discharged. To optimal utilization of a battery over its lifetime requires characterization of its performance degradation under different storage and cycling conditions. Aging tests were conducted on commercial graphite/nickel-manganese-cobalt (NMC) Li-ion cells. A general lifetime prognostic model framework is applied to model changes in capacity and resistance as the battery degrades. Across 9 aging test conditions from 0oC to 55oC, the model predicts capacity fade with 1.4 percent RMS error and resistance growth with 15 percent RMS error. The model, recast in state variable form with 8 states representing separate fade mechanisms, is used to extrapolate lifetime for example applications of the energy storage system integrated with renewable photovoltaic (PV) power generation.

  11. Structural Loads Analysis for Wave Energy Converters: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    van Rij, Jennifer A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Yu, Yi-Hsiang [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Guo, Yi [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-09

    This study explores and verifies the generalized body-modes method for evaluating the structural loads on a wave energy converter (WEC). Historically, WEC design methodologies have focused primarily on accurately evaluating hydrodynamic loads, while methodologies for evaluating structural loads have yet to be fully considered and incorporated into the WEC design process. As wave energy technologies continue to advance, however, it has become increasingly evident that an accurate evaluation of the structural loads will enable an optimized structural design, as well as the potential utilization of composites and flexible materials, and hence reduce WEC costs. Although there are many computational fluid dynamics, structural analyses and fluid-structure-interaction (FSI) codes available, the application of these codes is typically too computationally intensive to be practical in the early stages of the WEC design process. The generalized body-modes method, however, is a reduced order, linearized, frequency-domain FSI approach, performed in conjunction with the linear hydrodynamic analysis, with computation times that could realistically be incorporated into the WEC design process. The objective of this study is to verify the generalized body-modes approach in comparison to high-fidelity FSI simulations to accurately predict structural deflections and stress loads in a WEC. Two verification cases are considered, a free-floating barge and a fixed-bottom column. Details for both the generalized body-modes models and FSI models are first provided. Results for each of the models are then compared and discussed. Finally, based on the verification results obtained, future plans for incorporating the generalized body-modes method into the WEC simulation tool, WEC-Sim, and the overall WEC design process are discussed.

  12. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Stinis, Panos [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-08-07

    This is the final report for the work conducted at the University of Minnesota (during the period 12/01/12-09/18/14) by PI Panos Stinis as part of the "Collaboratory on Mathematics for Mesoscopic Modeling of Materials" (CM4). CM4 is a multi-institution DOE-funded project whose aim is to conduct basic and applied research in the emerging field of mesoscopic modeling of materials.

  13. Neutrino Mass Seesaw Version 3: Recent Developments

    CERN Document Server

    Ma, Ernest

    2009-01-01

    The origin of neutrino mass is usually attributed to a seesaw mechanism, either through a heavy Majorana fermion singlet (version 1) or a heavy scalar triplet (version 2). Recently, the idea of using a heavy Majorana fermion triplet (version 3) has gained some attention. This is a review of the basic idea involved, its U(1) gauge extension, and some recent developments.

  14. DISFRAC Version 2.0 Users Guide

    Energy Technology Data Exchange (ETDEWEB)

    Cochran, Kristine B [ORNL; Erickson, Marjorie A [ORNL; Williams, Paul T [ORNL; Klasky, Hilda B [ORNL; Bass, Bennett Richard [ORNL

    2013-01-01

    DISFRAC is the implementation of a theoretical, multi-scale model for the prediction of fracture toughness in the ductile-to-brittle transition temperature (DBTT) region of ferritic steels. Empirically-derived models of the DBTT region cannot legitimately be extrapolated beyond the range of existing fracture toughness data. DISFRAC requires only tensile properties and microstructural information as input, and thus allows for a wider range of application than empirical, toughness data dependent models. DISFRAC is also a framework for investigating the roles of various microstructural and macroscopic effects on fracture behavior, including carbide particle sizes, grain sizes, strain rates, and material condition. DISFRAC s novel approach is to assess the interaction effects of macroscopic conditions (geometry, loading conditions) with variable microstructural features on cleavage crack initiation and propagation. The model addresses all stages of the fracture process, from microcrack initiation within a carbide particle, to propagation of that crack through grains and across grain boundaries, finally to catastrophic failure of the material. The DISFRAC procedure repeatedly performs a deterministic analysis of microcrack initiation and propagation within a macroscopic crack plastic zone to calculate a critical fracture toughness value for each microstructural geometry set. The current version of DISFRAC, version 2.0, is a research code for developing and testing models related to cleavage fracture and transition toughness. The various models and computations have evolved significantly over the course of development and are expected to continue to evolve as testing and data collection continue. This document serves as a guide to the usage and theoretical foundations of DISFRAC v2.0. Feedback is welcomed and encouraged.

  15. Embrittlement data base, version 1

    Energy Technology Data Exchange (ETDEWEB)

    Wang, J.A.

    1997-08-01

    The aging and degradation of light-water-reactor (LWR) pressure vessels is of particular concern because of their relevance to plant integrity and the magnitude of the expected irradiation embrittlement. The radiation embrittlement of reactor pressure vessel (RPV) materials depends on many different factors such as flux, fluence, fluence spectrum, irradiation temperature, and preirradiation material history and chemical compositions. These factors must be considered to reliably predict pressure vessel embrittlement and to ensure the safe operation of the reactor. Based on embrittlement predictions, decisions must be made concerning operating parameters and issues such as low-leakage-fuel management, possible life extension, and the need for annealing the pressure vessel. Large amounts of data from surveillance capsules and test reactor experiments, comprising many different materials and different irradiation conditions, are needed to develop generally applicable damage prediction models that can be used for industry standards and regulatory guides. Version 1 of the Embrittlement Data Base (EDB) is such a comprehensive collection of data resulting from merging version 2 of the Power Reactor Embrittlement Data Base (PR-EDB). Fracture toughness data were also integrated into Version 1 of the EDB. For power reactor data, the current EDB lists the 1,029 Charpy transition-temperature shift data points, which include 321 from plates, 125 from forgoings, 115 from correlation monitor materials, 246 from welds, and 222 from heat-affected-zone (HAZ) materials that were irradiated in 271 capsules from 101 commercial power reactors. For test reactor data, information is available for 1,308 different irradiated sets (352 from plates, 186 from forgoings, 303 from correlation monitor materials, 396 from welds and 71 from HAZs) and 268 different irradiated plus annealed data sets.

  16. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    R Paul Drake

    2004-01-12

    OAK-B135 This is the final report from the project Hydrodynamics by High-Energy-Density Plasma Flow and Hydrodynamics and Radiation Hydrodynamics with Astrophysical Applications. This project supported a group at the University of Michigan in the invention, design, performance, and analysis of experiments using high-energy-density research facilities. The experiments explored compressible nonlinear hydrodynamics, in particular at decelerating interfaces, and the radiation hydrodynamics of strong shock waves. It has application to supernovae, astrophysical jets, shock-cloud interactions, and radiative shock waves.

  17. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Jarillo-Herrero, Pablo [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States)

    2017-02-07

    This is the final report of our research program on electronic transport experiments on Topological Insulator (TI) devices, funded by the DOE Office of Basic Energy Sciences. TIbased electronic devices are attractive as platforms for spintronic applications, and for detection of emergent properties such as Majorana excitations , electron-hole condensates , and the topological magneto-electric effect . Most theoretical proposals envision geometries consisting of a planar TI device integrated with materials of distinctly different physical phases (such as ferromagnets and superconductors). Experimental realization of physics tied to the surface states is a challenge due to the ubiquitous presence of bulk carriers in most TI compounds as well as degradation during device fabrication.

  18. Importance of sieve size in deep-sea macrobenthic studies

    Digital Repository Service at National Institute of Oceanography (India)

    Pavithran, S.; Ingole, B.S.; Nanajkar, M.; Goltekar, R.C.

    was sampled more effectively with the smaller mesh sieve. Our results show a significant reduction in the Author version: Mar. Biol. Res.: 5(4); 2009; 391-398 The final and definitive form of the preprint has been published in the "Marine Biology Research... food limited environment, the advantages of having either large or small body size is explained by Thiel (1975). He suggests that, although the cost of maintaining a given biomass of smaller organisms is The final and definitive form of the preprint...

  19. Efficient Management of Biomedical Ontology Versions

    Science.gov (United States)

    Kirsten, Toralf; Hartung, Michael; Groß, Anika; Rahm, Erhard

    Ontologies have become very popular in life sciences and other domains. They mostly undergo continuous changes and new ontology versions are frequently released. However, current analysis studies do not consider the ontology changes reflected in different versions but typically limit themselves to a specific ontology version which may quickly become obsolete. To allow applications easy access to different ontology versions we propose a central and uniform management of the versions of different biomedical ontologies. The proposed database approach takes concept and structural changes of succeeding ontology versions into account thereby supporting different kinds of change analysis. Furthermore, it is very space-efficient by avoiding redundant storage of ontology components which remain unchanged in different versions. We evaluate the storage requirements and query performance of the proposed approach for the Gene Ontology.

  20. On the XeF+/H2O System: Synthesis and Characterization of the Xenon (II) Oxide Fluoride Cation, FXeOXeFXeF+ (PREPRINT)

    Science.gov (United States)

    2009-06-30

    11 fluoride plays a two-fold role in influencing this equilibrium. There is the obvious mass effect expected from the Le Chatelier Principle ...the Xenon (II) Oxide Fluoride Cation, FXeOXeFXeF + (Preprint) 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR( S ) M. Gerken...AFRL/RZSP) 5e. TASK NUMBER 5f. WORK UNIT NUMBER 50260541 7. PERFORMING ORGANIZATION NAME( S ) AND ADDRESS(ES) AND ADDRESS(ES) 8. PERFORMING

  1. Reduciblity, Arrhenius plots and the Uroboros Dragon, a reply to the preprint "Correlations in Nuclear Arrhenius-Type Plots" by M.B. Tsang and P. Danielewicz

    CERN Document Server

    Moretto, L G; Phair, L; Wozniak, G J

    1997-01-01

    In a recent preprint by Tsang and Danielewicz, the authors attempt to give alternative or trivial explanations for the reducible and "thermal" nature of the intermediate mass fragment excitation functions reported previously (Phys. Rev. Lett. 74, 1530 (1995), Phys. Lett B 361, 25 (1995), Phys. Rep. 287, 249 (1997)). We demonstrate that their proposed "self-correlation" explanation for linear Arrhenius plots is based upon a flawed autocorrelation analysis involving circular reasoning.

  2. Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Webb, Robert C. [Texas A& M University; Kamon, Teruki [Texas A& M University; Toback, David [Texas A& M University; Safonov, Alexei [Texas A& M University; Dutta, Bhaskar [Texas A& M University; Dimitri, Nanopoulos [Texas A& M University; Pope, Christopher [Texas A& M University; White, James [Texas A& M University

    2013-11-18

    Overview The High Energy Physics Group at Texas A&M University is submitting this final report for our grant number DE-FG02-95ER40917. This grant has supported our wide range of research activities for over a decade. The reports contained here summarize the latest work done by our research team. Task A (Collider Physics Program): CMS & CDF Profs. T. Kamon, A. Safonov, and D. Toback co-lead the Texas A&M (TAMU) collider program focusing on CDF and CMS experiments. Task D: Particle Physics Theory Our particle physics theory task is the combined effort of Profs. B. Dutta, D. Nanopoulos, and C. Pope. Task E (Underground Physics): LUX & NEXT Profs. R. Webb and J. White(deceased) lead the Xenon-based underground research program consisting of two main thrusts: the first, participation in the LUX two-phase xenon dark matter search experiment and the second, detector R&D primarily aimed at developing future detectors for underground physics (e.g. NEXT and LZ).

  3. Versions in the lifecycle of academic papers user requirements and guidelins fo digital repositories

    CERN Document Server

    CERN. Geneva

    2005-01-01

    An academic research paper evolves through various stages during its lifecycle, for example from early conference presentation through working paper to final published refereed journal article. Different versions can co-exist in publicly available electronic form. Finding out researchers’ attitudes towards storing, labelling and making accessible these different versions, both of their own and of their peers’ work is at the heart of the VERSIONS Project, funded by the JISC under the Digital Repositories Programme. The project addresses the issues and uncertainties relating to versions of academic papers in digital repositories. By including a user requirements study, the project will clarify the needs of researchers and other stakeholders for deposit, storage and accessibility of different versions in the lifecycle of a digital resource. In addition to looking at user needs, the project will analyse researchers’ current practice in terms of retention of author copies of their own material. This investig...

  4. Results from CrIS/ATMS Obtained Using an "AIRS Version-6 Like" Retrieval Algorithm

    Science.gov (United States)

    Susskind, Joel; Kouvaris, Louis; Iredell, Lena; Blaisdell, John

    2015-01-01

    AIRS and CrIS Version-6.22 O3(p) and q(p) products are both superior to those of AIRS Version-6.Monthly mean August 2014 Version-6.22 AIRS and CrIS products agree reasonably well with OMPS, CERES, and witheach other. JPL plans to process AIRS and CrIS for many months and compare interannual differences. Updates to thecalibration of both CrIS and ATMS are still being finalized. We are also working with JPL to develop a joint AIRS/CrISlevel-1 to level-3 processing system using a still to be finalized Version-7 retrieval algorithm. The NASA Goddard DISCwill eventually use this system to reprocess all AIRS and recalibrated CrIS/ATMS. .

  5. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Weissman, Jon B

    2006-04-30

    High performance computational science and engineering simulations have become an increasingly important part of the scientist's problem solving toolset. A key reason is the development of widely used codes and libraries that support these applications, for example, Netlib, a collection of numerical libraries [33]. The term community codes refers to those libraries or applications that have achieved some critical level of acceptance by a user community. Many of these applications are on the high-end in terms of required resources: computation, storage, and communication. Recently, there has been considerable interest in putting such applications on-line and packaging them as network services to make them available to a wider user base. Applications such as data mining [22], theorem proving and logic [14], parallel numerical computation [8][32] are example services that are all going on-line. Transforming applications into services has been made possible by advances in packaging and interface technologies including component systems [2][6][13][28][37], proposed communication standards [34], and newer Web technologies such as Web Services [38]. Network services allow the user to focus on their application and obtain remote service when needed by simply invoking the service across the network. The user can be assured that the most recent version of the code or service is always provided and they do not need to install, maintain, and manage significant infrastructure to access the service. For high performance applications in particular, the user is still often required to install a code base (e.g. MPI), and therefore become involved with the tedious details of infrastructure management. In the network service model, the service provider is responsible for all of these activities and not the user. The user need not become an expert in high performance computing. An additional advantage of high-end network services is that the user need not have specialized

  6. On $k$-gonal loci in Severi varieties on general $K3$ surfaces and rational curves on hyperk\\"ahler manifolds (improved version)

    CERN Document Server

    Ciliberto, Ciro

    2012-01-01

    In this paper we study the gonality of the normalizations of curves in the linear system $|H|$ of a general primitively polarized complex $K3$ surface $(S,H)$ of genus $p$. We prove two main results. First we give a necessary condition on $p, g, r, d$ for the existence of a curve in $|H|$ with geometric genus $g$ whose normalization has a $g^ r_d$. Secondly we prove that for all numerical cases compatible with the above necessary condition, there is a family of \\emph{nodal} curves in $|H|$ of genus $g$ carrying a $g^1_k$ and of dimension equal to the \\emph{expected dimension} $\\min\\{2(k-1),g\\}$. Relations with the Mori cone of the hyperk\\"ahler manifold $\\Hilb^ k(S)$ and with conjectures by Hassett-Tschinkel and by Huybrechts-Sawon are discussed. This is an improved version of the preprint arXiv:1202.2701 with stronger main result and simplified degeneration argument.

  7. FCC Official Brochure - German version

    CERN Multimedia

    Charitos, Panagiotis

    2017-01-01

    The FCC brochure describes the main scope of the study and give more information about the main scenarios explored under the study. It also highlights the ongoing R&D efforts launched by the FCC study. Finally, it offers more information about the collaboration and a list of useful contact details.

  8. FCC Official Brochure - French Version

    CERN Multimedia

    Charitos, Panagiotis

    2017-01-01

    The FCC brochure describes the main scope of the study and give more information about the main scenarios explored under the study. It also highlights the ongoing R&D efforts launched by the FCC study. Finally, it offers more information about the collaboration and a list of useful contact details.

  9. DF-224 Version 8.0 FS Installation

    Science.gov (United States)

    Boyce, Leslye

    1990-12-01

    DF-224 Version 8.0 will implement the final phase of the 3 Logical Memory Unit Contingency Plan described in LMSC,EM SPS640. It focuses on new capabilities, implementing a spin stabilized safemode, correcting the integral calculation in Momentum Management Law and other miscellaneous command changes geared at enhancing acquistions and science. Due to the complexity of the installation, dedicated space-craft time is required to minimize risk. In summary, this proposal requests 7 orbits of dedicated spacecraft time for installation, regression testing and contingency back-out time for DF-224 Flight Software (FS) Version 8.0 for the week of April 27,(SMS118). No dedicated time is requested for the pre-load of the FS.

  10. The limits of mathematics alternative version

    CERN Document Server

    Chaitin, G J

    1994-01-01

    This is an alternative version of the course notes in chao-dyn/9407003. The previous version is based on measuring the size of lisp s-expressions. This version is based on measuring the size of what I call lisp m-expressions, which are lisp s-expressions with most parentheses omitted. This formulation of algorithmic information theory is harder to understand than the one that was presented in chao-dyn/9407003, but the constants obtained in all theorems are now less than half the size that they were before. It is not clear to me which version of algorithmic information theory is to be preferred.

  11. FTP-Server for exchange, interpretation, and database-search of ion mobility spectra, literature, preprints and software

    Science.gov (United States)

    Baumbach, J. I.; Vonirmer, A.

    1995-01-01

    To assist current discussion in the field of ion mobility spectrometry, at the Institut fur Spectrochemie und angewandte Spektroskopie, Dortmund, start with 4th of December, 1994 work of an FTP-Server, available for all research groups at univerisities, institutes and research worker in industry. We support the exchange, interpretation, and database-search of ion mobility spectra through data format JCAMP-DS (Joint Committee on Atomic and Molecular Physical Data) as well as literature retrieval, pre-print, notice, and discussion board. We describe in general lines the entrance conditions, local addresses, and main code words. For further details, a monthly news report will be prepared for all common users. Internet email address for subscribing is included in document.

  12. MCNP(TM) Version 5.

    Energy Technology Data Exchange (ETDEWEB)

    Cox, L. J. (Lawrence J.); Barrett, R. F. (Richard F.); Booth, Thomas Edward; Briesmeister, Judith F.; Brown, F. B. (Forrest B.); Bull, J. S. (Jeffrey S.); Giesler, G. C. (Gregg Carl); Goorley, J. T. (John T.); Mosteller, R. D. (Russell D.); Forster, R. A. (R. Arthur); Post, S. E. (Susan E.); Prael, R. E. (Richard E.); Selcow, Elizabeth Carol,; Sood, A. (Avneet)

    2002-01-01

    The Monte Carlo transport workhorse, MCNP, is undergoing a massive renovation at Los Alamos National Laboratory (LANL) in support of the Eolus Project of the Advanced Simulation and Computing (ASCI) Program. MCNP Version 5 (V5) (expected to be released to RSICC in Spring, 2002) will consist of a major restructuring from FORTRAN-77 (with extensions) to ANSI-standard FORTRAN-90 with support for all of the features available in the present release (MCNP-4C2/4C3). To most users, the look-and-feel of MCNP will not change much except for the improvements (improved graphics, easier installation, better online documentation). For example, even with the major format change, full support for incremental patching will still be provided. In addition to the language and style updates, MCNP V5 will have various new user features. These include improved photon physics, neutral particle radiography, enhancements and additions to variance reduction methods, new source options, and improved parallelism support (PVM, MPI, OpenMP).

  13. Global Historical Climatology Network - Daily (GHCN-Daily), Version 2 (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, this dataset has been superseded by a newer version (see below). Users should not use this version except in rare cases (e.g., when reproducing previous...

  14. Tiger LDRD final report

    Energy Technology Data Exchange (ETDEWEB)

    Steich, D J; Brugger, S T; Kallman, J S; White, D A

    2000-02-01

    This final report describes our efforts on the Three-Dimensional Massively Parallel CEM Technologies LDRD project (97-ERD-009). Significant need exists for more advanced time domain computational electromagnetics modeling. Bookkeeping details and modifying inflexible software constitute a vast majority of the effort required to address such needs. The required effort escalates rapidly as problem complexity increases. For example, hybrid meshes requiring hybrid numerics on massively parallel platforms (MPPs). This project attempts to alleviate the above limitations by investigating flexible abstractions for these numerical algorithms on MPPs using object-oriented methods, providing a programming environment insulating physics from bookkeeping. The three major design iterations during the project, known as TIGER-I to TIGER-III, are discussed. Each version of TIGER is briefly discussed along with lessons learned during the development and implementation. An Application Programming Interface (API) of the object-oriented interface for Tiger-III is included in three appendices. The three appendices contain the Utilities, Entity-Attribute, and Mesh libraries developed during the project. The API libraries represent a snapshot of our latest attempt at insulated the physics from the bookkeeping.

  15. A Comparative Study on the Two Chinese Versions of Gone with the Wind:from the Social Linguistic Perspective

    Institute of Scientific and Technical Information of China (English)

    李华; 林巍

    2015-01-01

    This thesis uses social linguistics as its theoretical framework and makes a comparative study on the two Chinese versions of Gone with the Wind.And the author of the thesis discusses the translation methods used in the two Chinese versions and also analyzes the possible explanation.Finally the result shows that there are obvious differences in choice of words, sentence structures, description of female psychological features and appearances between two versions.The author expects that this thesis can make some contributions to the comparative studies on translated versions of Gone with the Wind and gender difference studies.

  16. A Comparative Study on the Two Chinese Versions of Gone with the Wind: from the Social Linguistic Perspective

    Institute of Scientific and Technical Information of China (English)

    李华; 林巍

    2015-01-01

    This thesis uses social linguistics as its theoretical framework and makes a comparative study on the two Chinese versions of Gone with the Wind.And the author of the thesis discusses the translation methods used in the two Chinese versions and also analyzes the possible explanation.Finally the result shows that there are obvious differences in choice of words,sentence structures,description of female psychological features and appearances between two versions.The author expects that this thesis can make some contributions to the comparative studies on translated versions of Gone with the Wind and gender difference studies.

  17. Texts in multiple versions: histories of editions

    NARCIS (Netherlands)

    Giuliani, L.; Brinkman, H.; Lernout, G.; Mathijsen, M.

    2006-01-01

    Texts in multiple versions constitute the core problem of textual scholarship. For texts from antiquity and the medieval period, the many versions may be the result of manuscript transmission, requiring editors and readers to discriminate between levels of authority in variant readings produced

  18. Schema Versioning for Multitemporal Relational Databases.

    Science.gov (United States)

    De Castro, Cristina; Grandi, Fabio; Scalas, Maria Rita

    1997-01-01

    Investigates new design options for extended schema versioning support for multitemporal relational databases. Discusses the improved functionalities they may provide. Outlines options and basic motivations for the new design solutions, as well as techniques for the management of proposed schema versioning solutions, includes algorithms and…

  19. Distributed Version Control and Library Metadata

    Directory of Open Access Journals (Sweden)

    Galen M. Charlton

    2008-06-01

    Full Text Available Distributed version control systems (DVCSs are effective tools for managing source code and other artifacts produced by software projects with multiple contributors. This article describes DVCSs and compares them with traditional centralized version control systems, then describes extending the DVCS model to improve the exchange of library metadata.

  20. UPGRADES TO Monteburns, VERSION 3.0

    Energy Technology Data Exchange (ETDEWEB)

    Galloway, Jack D [Los Alamos National Laboratory; Trellue, Holly R [Los Alamos National Laboratory

    2012-06-22

    Monteburns VERSION 3.0 is an upgrade of the existing Monteburns code available through RSICC. The new version includes modern programming style, increased parallel computing, more accurate capture gamma calculations and an automated input generator. This capability was demonstrated through a small PWR core simulation.

  1. Texts in multiple versions: histories of editions

    NARCIS (Netherlands)

    L. Giuliani; H. Brinkman; G. Lernout; M. Mathijsen

    2006-01-01

    Texts in multiple versions constitute the core problem of textual scholarship. For texts from antiquity and the medieval period, the many versions may be the result of manuscript transmission, requiring editors and readers to discriminate between levels of authority in variant readings produced alon

  2. PVWatts Version 1 Technical Reference

    Energy Technology Data Exchange (ETDEWEB)

    Dobos, A. P.

    2013-10-01

    The NREL PVWatts(TM) calculator is a web application developed by the National Renewable Energy Laboratory (NREL) that estimates the electricity production of a grid-connected photovoltaic system based on a few simple inputs. PVWatts combines a number of sub-models to predict overall system performance, and makes several hidden assumptions about performance parameters. This technical reference details the individual sub-models, documents assumptions and hidden parameters, and explains the sequence of calculations that yield the final system performance estimation.

  3. 5 CFR 470.311 - Final project approval.

    Science.gov (United States)

    2010-01-01

    ... Projects § 470.311 Final project approval. (a) The Office of Personnel Management will consider all timely...) The Office of Personnel Management shall provide a copy of the final version of the project plan to... 470.311 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PERSONNEL...

  4. SLR-PLUS version 1.0 user's manual

    Science.gov (United States)

    Hill, J. M.

    1982-11-01

    Version 1.0 of Solar Load Ratio heating plus cooling (SLR-PLUS), developed as an advanced passive solar system design and evaluation tool, is discussed. SLR-PLUS maintains the friendly user interface structure developed for the active solar system FCHART program. Users familiar with the FCHART programs and the FCHART/SLR program will find the operation of the SLR-PLUS program very familiar SLR-PLUS differs significantly from its parent program in three major ways. First, SLR-PLUS is strictly for the evaluation of passive solar energy systems. Second, the latest correlations from the Los Alamos National Laboratory serve as the basis to the passive heating analysis used by SLR-PLUS. Finally, SLR-PLUS includes cooling loads imposed by passive systems in the form of an annual cooling load for the building modelled and for the individual passive systems. The present version was developed on an Hewlett-Packard 1000 minicomputer using an RTE-IVB operating system. The present version requires approximately 22K 16-bit words of core with overlays to run. The FORTRAN source code will compile with minor changes on any FORTRAN 77 compiler.

  5. Project GICC-Rhone revised final report - short version february 2005; Projet GICC-Rhone rapport final revise - version courte fevrier 2005

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The GICC-Rhone project concerns the impacts on the french part of the Rhone basin, in the case of a climatic change which double the atmospheric CO{sub 2}. This situation is possible for the year 2050. The document precises the place of the project in the general scientifical context, the planning and the engaged teams, the experimental methodology, the used and developed simulation, a discussion on the data uncertainties and the obtained results. (A.L.B.)

  6. The limits of mathematics third version

    CERN Document Server

    Chaitin, G J

    1994-01-01

    This is yet another version of the course notes in chao-dyn/9407003. Here we change the universal Turing machine that is used to measure program-size complexity so that the constants in our information-theoretic incompleteness theorems are further reduced. This is done by inventing a more complicated version of lisp in which the parentheses associating defined functions with their arguments can be omitted. This is the third and last version of my course notes. It is not clear to me which is to be preferred, so all three have been made available for comment.

  7. Translation and Validation of Modified Dental Anxiety Scale: The Nepali Version

    Science.gov (United States)

    Pokharel, Prabhat Ranjan; Bhattarai, Bhushan

    2017-01-01

    Introduction. For proper management of anxious dental patients it is imperative to assess their levels of dental anxiety before treatment. Modified Dental Anxiety Scale (MDAS) is the most commonly used questionnaire to assess dental anxiety. But a Nepali version of MDAS is still lacking. Hence, the objective of this study was to develop a reliable and valid Nepali version of MDAS. Materials and Methods. The English version of the MDAS was translated into Nepali following a forward and backward translation process. Following pretesting and cognitive interviewing a final version of Nepali questionnaire was obtained. One hundred and fifty patients attending Department of Orthodontics completed the Nepali version of MDAS questionnaire at their convenience. Also, patients were asked to rate their overall anxiety on a 100 mm visual analog scale (VAS). A test-retest of the questionnaire was performed with 30 patients after 2 weeks. Results. Cronbach's alpha value of the Nepali version of MDAS was 0.775. The Intraclass Correlation Coefficient between test and retest was 0.872. Spearman's correlation coefficient between the total MDAS score and VAS score was 0.838. Conclusion. The translated Nepali version of MDAS is a reliable and valid instrument to measure the dental anxiety of Nepali patients.

  8. The Moab Design for Digital Object Versioning

    Directory of Open Access Journals (Sweden)

    Richard Anderson

    2013-07-01

    Full Text Available The Stanford Digital Repository has adopted the "Moab" design for versioned archiving of digital objects--a locally developed approach that optimizes data transfer, storage, and replication while providing efficient single file retrieval or full object reconstruction for any version of an object. This paper includes a review of various versioning strategies including forward-delta, reverse-delta and content-addressable mechanisms, the pro's and cons of each, and highlights the relative advantages of the Moab design. In our approach, the fixity information of a file manifestation is used as its primary identifier and the filename is treated as metadata. Storage and retrieval of an object's files is faciliated by mapping between a virtual version inventory and the physical location via a file signature catalog.

  9. VNI version 4.1. Simulation of high-energy particle collisions in QCD: Space-time evolution of e{sup +}e{sup {minus}}...A + B collisions with parton-cascades, cluster-hadronization, final-state hadron cascades

    Energy Technology Data Exchange (ETDEWEB)

    Geiger, K.; Longacre, R. [Brookhaven National Lab., Upton, NY (United States). Physics Dept.; Srivastava, D.K. [Variable Energy Cyclotron Centre, Calcutta (India)

    1999-02-01

    VNI is a general-purpose Monte-Carlo event-generator, which includes the simulation of lepton-lepton, lepton-hadron, lepton-nucleus, hadron-hadron, hadron-nucleus, and nucleus-nucleus collisions. It uses the real-time evolution of parton cascades in conjunction with a self-consistent hadronization scheme, as well as the development of hadron cascades after hadronization. The causal evolution from a specific initial state (determined by the colliding beam particles) is followed by the time-development of the phase-space densities of partons, pre-hadronic parton clusters, and final-state hadrons, in position-space, momentum-space and color-space. The parton-evolution is described in terms of a space-time generalization of the familiar momentum-space description of multiple (semi)hard interactions in QCD, involving 2 {r_arrow} 2 parton collisions, 2 {r_arrow} 1 parton fusion processes, and 1 {r_arrow} 2 radiation processes. The formation of color-singlet pre-hadronic clusters and their decays into hadrons, on the other hand, is treated by using a spatial criterion motivated by confinement and a non-perturbative model for hadronization. Finally, the cascading of produced prehadronic clusters and of hadrons includes a multitude of 2 {r_arrow} n processes, and is modeled in parallel to the parton cascade description. This paper gives a brief review of the physics underlying VNI, as well as a detailed description of the program itself. The latter program description emphasizes easy-to-use pragmatism and explains how to use the program (including simple examples), annotates input and control parameters, and discusses output data provided by it.

  10. A kernel version of multivariate alteration detection

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg; Vestergaard, Jacob Schack

    2013-01-01

    Based on the established methods kernel canonical correlation analysis and multivariate alteration detection we introduce a kernel version of multivariate alteration detection. A case study with SPOT HRV data shows that the kMAD variates focus on extreme change observations.......Based on the established methods kernel canonical correlation analysis and multivariate alteration detection we introduce a kernel version of multivariate alteration detection. A case study with SPOT HRV data shows that the kMAD variates focus on extreme change observations....

  11. Ecodesign Directive version 2.0

    DEFF Research Database (Denmark)

    This present report reports on the main findings of the project Ecodesign Directive version 2.0 - from Energy Efficiency to Resource Efficiency. The project is financed by the Danish Environmental Protection Agency and ran from December 2012 to June 2014.......This present report reports on the main findings of the project Ecodesign Directive version 2.0 - from Energy Efficiency to Resource Efficiency. The project is financed by the Danish Environmental Protection Agency and ran from December 2012 to June 2014....

  12. Cubical version of combinatorial differential forms

    DEFF Research Database (Denmark)

    Kock, Anders

    2010-01-01

    The theory of combinatorial differential forms is usually presented in simplicial terms. We present here a cubical version; it depends on the possibility of forming affine combinations of mutual neighbour points in a manifold, in the context of synthetic differential geometry.......The theory of combinatorial differential forms is usually presented in simplicial terms. We present here a cubical version; it depends on the possibility of forming affine combinations of mutual neighbour points in a manifold, in the context of synthetic differential geometry....

  13. PCATool-ADULT-BRAZIL: a reduced version

    Directory of Open Access Journals (Sweden)

    Mônica Maria Celestina de Oliveira

    2013-09-01

    Full Text Available The reorganization of the Brazilian health system brings the need for on-going evaluation of the services offered to the population. The Primary Care Assessment Tool (PCATool-Brazil version for adult users, validated for the Brazilian context, adequately measures the presence and extent of attributes of primary health care (PHC services. A reduced version of this instrument is required to optimize the process of implementation and use of the results in strategic actions. This article aims to present a reduced version of the PCATool-Brazil for adult users and analyze its suitability. The instrument was applied to 2404 adult residents of areas covered by primary health care (PHC units in Porto Alegre, Rio Grande do Sul state. By the two-parameter logistic model of Item Response Theory (ML-2, 23 items that presented discrimination classified as moderate to strong, contemplating the seven attributes of PHC, were selected. As a measure of consistency, the results obtained with this version were compared with the complete version, revealing consistent PHC scores. These findings indicate that the PCATool-Brazil reduced version for adult users presents adequate validity and reliability, and it can be adopted as a rapid assessment tool to evaluate PHC in Brazilian services, permitting decision making guided by evidence in the development of actions to improve the quality of care offered to the population.

  14. A Computer Adaptive Testing Version of the Addiction Severity Index-Multimedia Version (ASI-MV): The Addiction Severity CAT.

    Science.gov (United States)

    Butler, Stephen F; Black, Ryan A; McCaffrey, Stacey A; Ainscough, Jessica; Doucette, Ann M

    2017-02-23

    The purpose of this study was to develop and validate a computer adaptive testing (CAT) version of the Addiction Severity Index-Multimedia Version (ASI-MV), the Addiction Severity CAT. This goal was accomplished in 4 steps. First, new candidate items for Addiction Severity CAT domains were evaluated after brainstorming sessions with experts in substance abuse treatment. Next, this new item bank was psychometrically evaluated on a large nonclinical (n = 4,419) and substance abuse treatment (n = 845) sample. Based on these results, final items were selected and calibrated for the creation of the Addiction Severity CAT algorithms. Once the algorithms were developed for the entire assessment, a fully functioning prototype of an Addiction Severity CAT was created. CAT simulations were conducted, and optimal termination criteria were selected for the Addiction Severity CAT algorithms. Finally, construct validity of the CAT algorithms was evaluated by examining convergent and discriminant validity and sensitivity to change. The Addiction Severity CAT was determined to be valid, sensitive to change, and reliable. Further, the Addiction Severity CAT's time of completion was found to be significantly less than the average time of completion for the ASI-MV composite scores. This study represents the initial validation of an Addiction Severity CAT based on item response theory, and further exploration of the Addiction Severity CAT is needed. (PsycINFO Database Record

  15. Final Report, “Exploiting Global View for Resilience”

    Energy Technology Data Exchange (ETDEWEB)

    Chien, Andrew [University of Chicago

    2017-03-29

    Final technical report for the "Exploiting Global View for Resilience" project. The GVR project aims to create a new approach to portable, resilient applications. The GVR approach builds on a global view data model,, adding versioning (multi-version), user control of timing and rate (multi-stream), and flexible cross layer error signalling and recovery. With a versioned array as a portable abstraction, GVR enables application programmers to exploit deep scientific and application code insights to manage resilience (and its overhead) in a flexible, portable fashion.

  16. International Spinal Cord Injury Core Data Set (version 2.0)-including standardization of reporting

    NARCIS (Netherlands)

    Biering-Sorensen, F.; DeVivo, M. J.; Charlifue, S.; Chen, Y.; New, P. W.; Noonan, V.; Post, M. W. M.; Vogel, L.

    2017-01-01

    Study design: The study design includes expert opinion, feedback, revisions and final consensus. Objectives: The objective of the study was to present the new knowledge obtained since the International Spinal Cord Injury (SCI) Core Data Set (Version 1.0) published in 2006, and describe the adjustmen

  17. COPAT - towards a recommended model version of COSMO-CLM

    Science.gov (United States)

    Anders, Ivonne; Brienen, Susanne; Eduardo, Bucchignani; Ferrone, Andrew; Geyer, Beate; Keuler, Klaus; Lüthi, Daniel; Mertens, Mariano; Panitz, Hans-Jürgen; Saeed, Sajjad; Schulz, Jan-Peter; Wouters, Hendrik

    2016-04-01

    The regional climate model COSMO-CLM is a community model (www.clm-community.com). In close collaboration with the COSMO-consortium the model is further developed by the community members for climate applications. One of the tasks of the community is to give a recommendation on the model version and to evaluate the models performance. The COPAT (Coordinated Parameter Testing) is a voluntary community effort to allow different institutions to carry out model simulations systematically by different institutions in order to test new model options and to find a satisfactory model setup for hydrostatic climate simulations over Europe. We will present the COPAT method used to achieve the latest recommended model version of COSMO-CLM (COSMO5.0_clm6). The simulations cover the EURO-CORDEX domain at two spatial resolutions 0.44° and 0.11°. They used ERAinterim forcing data for the time period of 1979-2000. Interpolated forcing data has been prepared once to ensure that all participating groups used identical forcing. The evaluation of each individual run has been performed for the time period 1981-2000 by using ETOOL and ETOOL-VIS. These tools have been developed within the community to evaluate standard COSMO-CLM output in comparison to observations provided by EOBS and CRU. COPAT was structured in three phases. In Phase 1 all participating institutions performed a reference run on their individual computing platforms and tested the influence of single model options on the results afterwards. Derived from the results of Phase 1 the most promising options were used in combinations in the second phase (Phase 2). These first two phases of COPAT consist of more than 100 simulations with a spatial resolution of 0.44°. Based on the best setup identified in Phase 2 a calibration of eight tuning parameters has been carried out following Bellbrat et al. (2012) in Phase 3. A final simulation with the calibrated parameters has been set up at a higher resolution of 0.11°. The

  18. A Fast and Accurate Algorithm for l1 Minimization Problems in Compressive Sampling (Preprint)

    Science.gov (United States)

    2013-01-22

    performance of algorithms in terms of various error metrics, speed, and robustness to noise. All the experiments are performed in Matlab 7.11 on...online version available, (2011). [17] J.-J. Moreau, Fonctions convexes duales et points proximaux dans un espace hilbertien, C.R. Acad. Sci. Paris Sér

  19. Spanish version of Colquitt's Organizational Justice Scale.

    Science.gov (United States)

    Díaz-Gracia, Liliana; Barbaranelli, Claudio; Moreno-Jiménez, Bernardo

    2014-01-01

    Organizational justice (OJ) is an important predictor of different work attitudes and behaviors. Colquitt's Organizational Justice Scale (COJS) was designed to assess employees' perceptions of fairness. This scale has four dimensions: distributive, procedural, informational, and interpersonal justice. The objective of this study is to validate it in a Spanish sample. The scale was administered to 460 Spanish employees from the service sector. 40.4% were men and 59.6% women. The Confirmatory Factor Analysis (CFA) supported the four dimensions structure for Spanish version of COJS. This model showed a better fit to data that the others models tested. Cronbach's alpha obtained for subscales ranged between .88 and .95. Correlations of the Spanish version of COJS with measures of incivility and job satisfaction were statistically significant and had a moderate to high magnitude, indicating a reasonable degree of construct validity. The Spanish version of COJS has adequate psychometric properties and may be of value in assessing OJ in Spanish setting.

  20. A kernel version of spatial factor analysis

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg

    2009-01-01

    . Schölkopf et al. introduce kernel PCA. Shawe-Taylor and Cristianini is an excellent reference for kernel methods in general. Bishop and Press et al. describe kernel methods among many other subjects. Nielsen and Canty use kernel PCA to detect change in univariate airborne digital camera images. The kernel...... version of PCA handles nonlinearities by implicitly transforming data into high (even infinite) dimensional feature space via the kernel function and then performing a linear analysis in that space. In this paper we shall apply kernel versions of PCA, maximum autocorrelation factor (MAF) analysis...

  1. Self-consciousness Scale: a Brazilian version.

    Science.gov (United States)

    Teixeira, M A; Gomes, W B

    1995-10-01

    The aim of this study was to examine the applicability of a Brazilian version of the Self-consciousness Scale to university students. Factorial structure, subscale intercorrelations, and normative data obtained with 182 subjects are reported. These results suggest that the proposed model of self-consciousness is applicable in the Brazilian culture, although some significant sex differences were found for two of the scales. Reliability tests and the factorial validity of the scale showed that this version still needs refinement to be used as a reliable research tool.

  2. Concepts of incremental updating and versioning

    CSIR Research Space (South Africa)

    Cooper, Antony K

    2004-07-01

    Full Text Available . BACKGROUND TO THE PROBLEM OF INCREMENTAL UPDATING AND VERSIONING As well as a number of Commissions, the International Cartographic Association (ICA) had one Working Group, on Incremental Updating and Versioning, and this presentation describes some... of the work undertaken recently by the Working Group (WG). The WG was voted for a Commission by the General Assembly held at the 21st ICC in Durban, South Africa. The basic problem being addressed by the Commission is that a user compiles their data base...

  3. Using Versions of Literary Texts to Improve Comprehension.

    Science.gov (United States)

    Samuel, Moses

    1995-01-01

    Discusses the use of the original text of Shakespeare's "Macbeth," a simplified version, and a comic-book version of the play in a college-level English-as-a-Second-Language (ESL) course. The results indicate that multiple versions of a text can help offset the shortcomings of using only the original text or a simplified version. (three…

  4. Construct Validation of the Portuguese Version of the Restraint Scale

    Directory of Open Access Journals (Sweden)

    João Carvalho

    2016-08-01

    Full Text Available AimThe main purpose of this study was to adapt the Restraint Scale (RS to Portuguese and examine its psychometric properties, specifically its construct validity.MethodIn this study, 238 normal-weight adults (82% women; Mean age = 36.6, SD = 15.0 participated in an online survey containing measures of Restraint Scale, Three Factor Eating Questionnaire, Dutch Eating Behaviour Questionnaire, and Body Dissatisfaction and Drive for Thinness scales.ResultsExploratory factor analyses corroborated the two-factors structure found in previous studies, in particular when three items without clear factorial assignment and low correlation were excluded. A final two-factors version of the RS containing seven items presented a very good fit to the measurement model and good internal consistency. Confirmatory factor analysis of the 7-items RS in relation to a three-factor model of overeating, dieting and body dissatisfaction measures revealed that the RS was the only restraint measure loading in all three factors.ConclusionThis suggests that the 7-items Portuguese version of the RS has good psychometric properties and unique features that lend it appropriate to identify and study unsuccessful chronic dieters.

  5. ICRAF Species Switchboard. Version 1.2

    DEFF Research Database (Denmark)

    Kindt, R.; Ordonez, J.; Smith, E.;

    2015-01-01

    The current version of the Agroforestry Species Switchboard documents the presence of a total of 26,135 plant species (33,813 species including synonyms) across 19 web-based databases. When available, hyperlinks to information on the selected species in particular databases are provided. In total...

  6. Version Control in Project-Based Learning

    Science.gov (United States)

    Milentijevic, Ivan; Ciric, Vladimir; Vojinovic, Oliver

    2008-01-01

    This paper deals with the development of a generalized model for version control systems application as a support in a range of project-based learning methods. The model is given as UML sequence diagram and described in detail. The proposed model encompasses a wide range of different project-based learning approaches by assigning a supervisory…

  7. UGV Control Interoperability Profile (IOP), Version 0

    Science.gov (United States)

    2011-12-21

    sections provide best practice information (articles, papers , website, etc.) 5.1.1 OCU Physical Attributes 5.1.1.1 Standards Number Document...information (articles, papers , website, etc.). In future versions of this document, additional tables will be developed, containing standards and guidelines...Mounted Display ICD Interface Control Document IEC International Electrotechnical Commission IMS Intelligent Munitions Systems IOP Interoperability

  8. ICRAF Species Switchboard. Version 1.2

    DEFF Research Database (Denmark)

    Kindt, R.; Ordonez, J.; Smith, E.

    2015-01-01

    The current version of the Agroforestry Species Switchboard documents the presence of a total of 26,135 plant species (33,813 species including synonyms) across 19 web-based databases. When available, hyperlinks to information on the selected species in particular databases are provided. In total...

  9. Development of a Spanish Version of the Xerox Tagger

    CERN Document Server

    Sánchez-León, F; Nieto, F; León, Fernando Sánchez; Serrano, Amalio F. Nieto

    1995-01-01

    This paper describes work performed withing the CRATER ({\\em C}orpus {\\em R}esources {\\em A}nd {\\em T}erminology {\\em E}xt{\\em R}action, MLAP-93/20) project, funded by the Commission of the European Communities. In particular, it addresses the issue of adapting the Xerox Tagger to Spanish in order to tag the Spanish version of the ITU (International Telecommunications Union) corpus. The model implemented by this tagger is briefly presented along with some modifications performed on it in order to use some parameters not probabilistically estimated. Initial decisions, like the tagset, the lexicon and the training corpus are also discussed. Finally, results are presented and the benefits of the {\\em mixed model} justified.

  10. 75 FR 1359 - Notice of Availability of Final Environmental Impact Statement for the Proposed Construction of...

    Science.gov (United States)

    2010-01-11

    ... Department of the Army; Corps of Engineers Notice of Availability of Final Environmental Impact Statement for...: Notice; extension of comment period. SUMMARY: The comment period for the Final Environmental Impact... Web version of the Final Environmental Impact Statement had problems with the Web links. The...

  11. Improved Temperature Sounding and Quality Control Methodology Using AIRS/AMSU Data: The AIRS Science Team Version 5 Retrieval Algorithm

    Science.gov (United States)

    Susskind, Joel; Blaisdell, John M.; Iredell, Lena; Keita, Fricky

    2009-01-01

    This paper describes the AIRS Science Team Version 5 retrieval algorithm in terms of its three most significant improvements over the methodology used in the AIRS Science Team Version 4 retrieval algorithm. Improved physics in Version 5 allows for use of AIRS clear column radiances in the entire 4.3 micron CO2 absorption band in the retrieval of temperature profiles T(p) during both day and night. Tropospheric sounding 15 micron CO2 observations are now used primarily in the generation of clear column radiances .R(sub i) for all channels. This new approach allows for the generation of more accurate values of .R(sub i) and T(p) under most cloud conditions. Secondly, Version 5 contains a new methodology to provide accurate case-by-case error estimates for retrieved geophysical parameters and for channel-by-channel clear column radiances. Thresholds of these error estimates are used in a new approach for Quality Control. Finally, Version 5 also contains for the first time an approach to provide AIRS soundings in partially cloudy conditions that does not require use of any microwave data. This new AIRS Only sounding methodology, referred to as AIRS Version 5 AO, was developed as a backup to AIRS Version 5 should the AMSU-A instrument fail. Results are shown comparing the relative performance of the AIRS Version 4, Version 5, and Version 5 AO for the single day, January 25, 2003. The Goddard DISC is now generating and distributing products derived using the AIRS Science Team Version 5 retrieval algorithm. This paper also described the Quality Control flags contained in the DISC AIRS/AMSU retrieval products and their intended use for scientific research purposes.

  12. Heat Transfer Modeling of a Charring Material Using Isoconversional Kinetics (Pre-Print)

    Science.gov (United States)

    2016-09-28

    Composite for Open Testing (TACOT) [9], and it corresponds to a lightweight ablative composite . Properties required for typical ablation heat transfer...considered a test case that has been defined to support discussion in the open literature. In this test case, a 3-cm slab of the charring TACOT material...Biochemical Engineering Quarterly, vol. 23, no. 4, pp. 493–496, 2009. 9. Theoretical Ablative Composite for Open Testing (TACOT), Version 2.2, 5th

  13. Versioning for CMIP6 in the Earth System Grid Federation

    Science.gov (United States)

    Weigel, Tobias; Kindermann, Stephan; Lautenschlager, Michael

    2015-04-01

    The Earth System Grid Federation (ESGF) has been used as the e-infrastructure to provide access to CMIP5 data and is expected to serve CMIP6 data as well. 2015 marks the year of continued planning and preparation where new concepts can still be implemented for the operational phase of CMIP6. A particular concern within ESGF operations is the versioning and automated replication of data. From CMIP5 experience we know that the pathway between initial submission of modelling data to the ESGF data space and quality-controlled long-term archival of the final products is long and far from linear. Data may be retracted, amended and updated, and metadata may accumulate at different stages. It is unrealistic to assume that a simple and straightforward process can be used as a role model to build ESGF services around the different stages data will pass through during the active phase of CMIP6. Nonetheless, at the technical level ESGF requires some form of automated control and management. At the same time, the accountability of data products must be made transparent to guard against misinterpretation, increase user experience and promote open and reproducible science. To address the challenges, first some essential versioning policies must be agreed upon and enforced through technical means and organizational processes. The volatile readiness state of CMIP data cannot be changed as it is given by the users; however its management can be improved. A promising approach is to embed persistent identifiers in all CMIP6 data objects and register them so they can be globally resolved by any user and used as reference points within ESGF management processes. A specific conceptual interpretation and management of such identifiers can ensure that they remain valid and useful even if the data objects change or become unavailable. For this, identifiers must be assigned to individual versions and aggregations, connected with each other and integrated in the existing ESGF publication

  14. Adaptation and cross-cultural validation of the Brazilian version of the Warwick-Edinburgh mental well-being scale

    Directory of Open Access Journals (Sweden)

    Jefferson Jovelino Amaral dos Santos

    2015-06-01

    Full Text Available Summary Objective: the Warwick-Edinburgh mental well-being scale (WEMWBS was designed to assess the level of mental well-being of a population or specific groups. The scale consists of 14 items covering functional psychological aspects, as well as well-being. The final score is calculated by adding up the response of each item, ranging from 1 to 5, obtaining a result from 14 to 70 points. Methods: the procedure was developed in accordance with the protocol recommended by the World Health Organization covering translation, back translation, semantic equivalence, expert evaluation of the previous steps, pre-test and final version of the instrument. Following, the final version was applied to a sample of 122 individuals and the data were subjected to descriptive statistical analysis, factor analysis, internal consistency and correlation with other validated instruments. Results: we performed the instrument's adaptation to the Portuguese spoken in Brazil, replacing terms to approximate the language to expressions of everyday life. The final version showed similar results to those from the original version, demonstrated by factor analysis, internal consistency (Cronbach's alpha: 0.89 and positive correlation with instruments validated to the Portuguese language. Conclusion: the Brazilian version of the WEMWBS proved to be easy to use and understand, showed high internal consistency and construct validity similar to the original instrument.

  15. ms2: A molecular simulation tool for thermodynamic properties, new version release

    CERN Document Server

    Glass, Colin W; Rutkai, Gábor; Deublein, Stephan; Köster, Andreas; Carrión, Gabriela Guevara; Wafai, Amer; Horsch, Martin; Bernreuther, Martin F; Windmann, Thorsten; Hasse, Hans; Vrabec, Jadran

    2015-01-01

    A new version release (2.0) of the molecular simulation tool ms2 [S. Deublein et al., Comput. Phys. Commun. 182 (2011) 2350] is presented. Version 2.0 of ms2 features a hybrid parallelization based on MPI and OpenMP for molecular dynamics simulation to achieve higher scalability. Furthermore, the formalism by Lustig [R. Lustig, Mol. Phys. 110 (2012) 3041] is implemented, allowing for a systematic sampling of Massieu potential derivatives in a single simulation run. Moreover, the Green-Kubo formalism is extended for the sampling of the electric conductivity and the residence time. To remove the restriction of the preceding version to electro-neutral molecules, Ewald summation is implemented to consider ionic long range interactions. Finally, the sampling of the radial distribution function is added.

  16. Preliminary Validation of a Brazilian Version of the Sport Motivation Scale

    Directory of Open Access Journals (Sweden)

    Mauricio Bara Filho

    2011-05-01

    Full Text Available The Sport Motivation Scale was firstly developed in French and later translated into English and validated by Pelletier et al. (1995. It is based on the principles of self-determination theory. The present study translated the English version into Portuguese to access and validate it with Brazilian athletes using a sample of 419 athletes (127 women and 292 men from ten sports. The Brazilian version of the scale showed satisfactory levels of internal consistency and temporal stability over a four-week period. The results of a confirmatory factor analysis partially supported the seven-factor structure. Finally, gender differences were found in all subscales. Taken together, these findings support the use of the Brazilian version of the scale for the assessment of motivation in sport.

  17. Psychometric properties of the Hebrew short version of the Zimbardo Time Perspective Inventory.

    Science.gov (United States)

    Orkibi, Hod

    2015-06-01

    The purpose of this study was to develop a short Hebrew version of the Zimbardo Time Perspective Inventory that can be easily administered by health professionals in research, therapy, and counseling. First, the empirical links of time perspective (TP) to subjective well-being and health protective and health risk behaviors are reviewed. Then, a brief account of the instrument's previous modifications is provided. Results of confirmatory factor analysis (N = 572) verified the five-factor structure of the short version and yielded acceptable internal consistency reliability for each factor. The correlation coefficients between the five subscales of the short (20 items) and the original (56 items) instruments were all above .79, indicating the suitability of the short version for assessing the five TP factors. Support for the discriminant and concurrent validity was also achieved, largely in agreement with previous findings. Finally, limitations and future directions are addressed, and potential applications in therapy and counseling are offered.

  18. Social and Emotional Competencies Evaluation Questionnaire-Teacher's Version: Validation of a Short Form.

    Science.gov (United States)

    Coelho, Vitor A; Sousa, Vanda; Marchante, Marta

    2016-08-01

    The Social and Emotional Competencies Evaluation Questionnaire-Teacher's version, Short Form (QACSE-P-SF) allows teachers to assess their students' social and emotional competencies, having been designed for program evaluation. Thirty-nine teachers completed the QACSE-P-SF, regarding 657 students (fourth to ninth grades). Factor analyses supported a six-factor structure with acceptable internal consistency. Sex differences were found with teachers reporting girls as having higher scores on Self-Control, Social Awareness, Relationship Skills, and Responsible Decision Making. Developmental differences were also found with fourth-grade students presenting higher levels of Social Awareness and Relationship Skills than older students. The final version of the QACSE-P-SF is composed by 30 items, organized into six scales and less time consuming than the previous version for teachers who need to assess full classes.

  19. GHCN Version 3 Land Temperature and Version 2 Land Precipitation Dataset

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains gridded mean temperature anomalies from the Global Historical Climatology Network-Monthly (GHCN-M) version 3.3.0 temperature data set. The...

  20. AF-GEOSPACE Version 2.1

    Science.gov (United States)

    Hilmer, R. V.; Ginet, G. P.; Hall, T.; Holeman, E.; Madden, D.; Tautz, M.; Roth, C.

    2004-05-01

    AF-GEOSpace is a graphics-intensive software program with space environment models and applications developed and distributed by the Space Weather Center of Excellence at AFRL. A review of current (Version 2.0) and planned (Version 2.1) AF-GEOSpace capabilities will be given. A wide range of physical domains is represented enabling the software to address such things as solar disturbance propagation, radiation belt configuration, and ionospheric auroral particle precipitation and scintillation. The software is currently being used to aid with the design, operation, and simulation of a wide variety of communications, navigation, and surveillance systems. Building on the success of previous releases, AF-GEOSpace has become a platform for the rapid prototyping of automated operational and simulation space weather visualization products and helps with a variety of tasks, including: orbit specification for radiation hazard avoidance; satellite design assessment and post-event anomaly analysis; solar disturbance effects forecasting; frequency and antenna management for radar and HF communications; determination of link outage regions for active ionospheric conditions; scientific model validation and comparison, physics research, and education. Version 2.0 provided a simplified graphical user interface, improved science and application modules, and significantly enhanced graphical performance. Common input data archive sets, application modules, and 1-D, 2-D, and 3-D visualization tools are provided to all models. Dynamic capabilities permit multiple environments to be generated at user-specified time intervals while animation tools enable displays such as satellite orbits and environment data together as a function of time. Building on the existing Version 2.0 software architecture, AF-GEOSpace Version 2.1 is currently under development and will include a host of new modules to provide, for example, geosynchronous charged particle fluxes, neutral atmosphere densities

  1. A version management model of PDM system and its realization

    Institute of Scientific and Technical Information of China (English)

    ZHONG Shi-sheng; LI Tao

    2008-01-01

    Based on the key function of version management in PDM system, this paper discusses the function and the realization of version management and the transitions of version states with a workflow. A directed acy-clic graph is used to describe a version model. Three storage modes of the directed acyclic graph version model in the database, the bumping block and the PDM working memory are presented and the conversion principle of these three modes is given. The study indicates that building a dynamic product structure configuration model based on versions is the key to resolve the problem. Thus a version model of single product object is built. Then the version management model in product structure configuration is built and the apphcation of version manage-ment of PDM syste' is presented as a case.

  2. Reliability and validity of the Thai version of the PHQ-9

    Directory of Open Access Journals (Sweden)

    Saipanish Ratana

    2008-06-01

    Full Text Available Abstract Background Most depression screening tools in Thailand are lengthy. The long process makes them impractical for routine use in primary care. This study aims to examine the reliability and validity of a Thai version Patient Health Questionnaire (PHQ-9 as a screening tool for major depression in primary care patients. Methods The English language PHQ-9 was translated into Thai. The process involved back-translation, cross-cultural adaptation, field testing of the pre-final version, as well as final adjustments. The PHQ-9 was then administered among 1,000 patients in family practice clinic. Of these 1,000 patients, 300 were further assessed by the Thai version of the Mini International Neuropsychiatric Interview (MINI and the Thai version of the Hamilton Rating Scale for Depression (HAM-D. These tools served as gold-standards for diagnosing depression and for assessing symptom severity, respectively. In the assessment, reliability and validity analyses, and receiver operating characteristic curve analysis were performed. Results Complete data were obtained from 924 participants and 279 interviewed respondents. The mean age of the participants was 45.0 years (SD = 14.3 and 73.7% of them were females. The mean PHQ-9 score was 4.93 (SD = 3.75. The Thai version of the PHQ-9 had satisfactory internal consistency (Cronbach's alpha = 0.79 and showed moderate convergent validity with the HAM-D (r = 0.56; P Conclusion The Thai version of the PHQ-9 has acceptable psychometric properties for screening for major depression in general practice with a recommended cut-off score of nine or greater.

  3. International Towing Tank Conference ITTC Symbols and Terminology List. Final Version 1996

    Science.gov (United States)

    2007-11-02

    Manoeuvring 40 1.4.2 Seakeeping 48 2 Special Craft 50 2.1 Planing and Semi-Displacement Vessels 50 2.2 Multi-Hull Vessels 56 2.3 Hydrofoil Boats 59 2.4 ACV...mWBK keels 2 c CH Chord length of an aerofoil m or a hydrofoil c CHME Mean chord length A / S mm RT c CHRT Chord length at the root mr c CHTP Chord...length at the tip mt f FM Camber of an aerofoil or a Maximum separation of m hydrofoil median and nose-tail line L LF Length of flap or wedge Measured

  4. Twenty-Two Hispanic Leaders Discuss Poverty: Results from the Hispanic Leaders Study. Final Version.

    Science.gov (United States)

    Quiroz, Julia Teresa

    This study examines the perceptions of 22 national Hispanic American leaders about poverty among Hispanics. Eleven of the leaders were Mexican American; five were Puerto Rican; four were Cuban American; one was Central American; and one was South American. Twelve of the leaders were heads of public interest organizations; six were members of…

  5. DOE-INES New Planet Bioenergy Technical Report Final Public Version 7-22-16

    Energy Technology Data Exchange (ETDEWEB)

    Niederschulte, Mark [INEOS New Planet BioEnergy LLC, Vero Beach, FL (United States); Russell, Kelly [INEOS New Planet BioEnergy LLC, Vero Beach, FL (United States); Connors, Keith [INEOS New Planet BioEnergy LLC, Vero Beach, FL (United States)

    2016-07-22

    INEOS Bio and New Planet Energy Florida formed a joint venture company called INEOS New Planet BioEnergy (“INPB”) in 2009. This venture’s intent was to demonstrate at commercial scale INEOS Bio’s third-generation technology (the “Bio Process”) that converts a variety of lignocellulosic feedstocks into bioethanol and renewable electricity. INPB applied for and was awarded a $50,000,000 Department of Energy (“DOE”) grant in 2009 to support the construction of the commercial demonstration plant. The grant was a cost-sharing arrangement requiring at least 50% equity participation by the grantee. INPB completed construction of the Indian River BioEnergy Center in Vero Beach, Florida in June, 2012. The facility is designed to produce 8 million gallons per year of fuel-grade bioethanol and 6MW of electrical power, with upwards of 2MW exported to the electrical grid. Construction of the Indian River BioEnergy Center was completed on-time and within its capital budget of $121 million.

  6. Final Screening Program, Third and Fourth Quarters, Version 3.1, Task 4. Volume 2

    Science.gov (United States)

    1988-05-01

    5155.1 26142 5221.6 66.4 5155.2 26146 5170.4 32.2 5138.2 26147 5169.5 34.4 5135.1 27002 5134.2 39.5 5094.7 27003 5144.2 46.4 5097.8 27004 5125.6 32.2...54.9 5166.7 26141 5221.6 66.5 5155.1 26142 5221.6 66.4 5155.2 26143 5220.9 44.9 5176.0 26146 5170.4 32.5 5137.9 26147 5169.5 34.6 5134.9 27002 5134.2...qf5 6a.40P.4 ssv~ v 4A I I- 9u I S -a- * to zaa Ja aa a a . iso .. o o .’ o o 4.oo ..- @4.-a. c ~ *- r"I ".3. 1-~ j~r ci S~ Waej lraC a a vvL N

  7. Reducing Hispanic Teenage Pregnancy and Family Poverty: A Replication Guide. Final Version.

    Science.gov (United States)

    Perez, Sonia M.; Duany, Luis A.

    This guide was designed to help Hispanic American community-based organizations develop and establish a teenage pregnancy prevention or teenage parenting program for Hispanic American adolescents. The guide does not assume prior knowledge of the scope of the teenage pregnancy problem in the United States, but it does underscore the critical role…

  8. Final versions of the initial package of classroom materials and guidelines

    NARCIS (Netherlands)

    Doorman, Michiel; Jonker, Vincent

    2014-01-01

    The main aim of the mascil Work Package 3 ‘classroom materials’ is to present guidelines and an online collection of teaching materials that encourage and support teachers to design their own classroom materials that connect IBL and the WoW in mathematics and science education.The collection present

  9. Final Environmental Impact Statement (EIS) for the Space Nuclear Thermal Propulsion (SNTP) Program. Sanitized Version. Appendices

    Science.gov (United States)

    1991-09-19

    Kinglet Regulus calendula Blue Gray Gnatcatcher Polioptila caerulea Black Tailed Gnatcatcher Polioptila melanusa West=rn Bluebird Sialia mexicana ...east of the roac should be collected. A 1 x 2 meter test pit is also recomended as this large site ,as the potential of containing subsurface culturA ... Cultura .. Resources along ’he Mid Valley Access Boad between Mine Mountain Junction and 16-02 Road. Date: 26 November 1983 Tvelve sites along the Mid

  10. Conduct of the Persian Gulf War: Final Report to Congress. Appendices A- S. Sanitized Version

    Science.gov (United States)

    1992-04-01

    introduced into both live-fire and force-on-force training. The live-fire target is a robotic M1Al. In maneuver training, an M1A1 moves from an out-of-sector...equipment and 30 days of supplies for a Marine Expeditionary Brigade [Navy, USMC] MRE - meal, ready-to-eat MRS - Mobility Requirements Study MRSA

  11. Final Environmental Impact Statement (EIS) for the Space Nuclear Thermal Propulsion (SNTP) Program. Sanitized Version

    Science.gov (United States)

    1991-09-19

    sources. Additional sources of background radiation are medical and dental diagnosis, nuclear weapons test fallout, consumer and industrial products...radiation from cosmic, te i, and internal body sources. Additional sources of background radiation are medical and dental diagnosis, nuclear weapons test...kilomer (50 mile) radius from the rference point used for the radiological analyses. Radiologia Imp= (U) (U) The region of influence for pM t

  12. Twenty-Two Hispanic Leaders Discuss Poverty: Results from the Hispanic Leaders Study. Final Version.

    Science.gov (United States)

    Quiroz, Julia Teresa

    This study examines the perceptions of 22 national Hispanic American leaders about poverty among Hispanics. Eleven of the leaders were Mexican American; five were Puerto Rican; four were Cuban American; one was Central American; and one was South American. Twelve of the leaders were heads of public interest organizations; six were members of…

  13. Conduct of the Persian Gulf War: Final Report to Congress. Chapters 1 through 8. Sanitized Version

    Science.gov (United States)

    1992-04-01

    Marines) Infantry Battalion (Senegal) 6th Mech Infantry Regiment ( Moroccan Forces) JFC-E Troops Qatar Mech Infantry Battalion 1st East Bengal INF BN...ground receiver [GPS] SMCM - surface mine countermeasures [Navy] SME - Squadron Medical Element [USAF] SMESA-Special Middle East Sealift

  14. version finale_PDF 23(3)_YABILE KR.xps

    African Journals Online (AJOL)

    HP Pro 2000

    ... new food self sufficiency campaign and asses to what extend the food crop promotion could be the engine of the ivorian economic growth. ... maintain the expansion of agricultural exports, both strategies are combined, in order .... avantages socio-économiques ; (5) enfin, une ..... donnera naissance à un cycle positif, avec.

  15. Demonstration of Heavy Hybrid Diesel Fleet Vehicles Final Report Version 2

    Science.gov (United States)

    2016-03-29

    maintained to avoid losses due to uneven pavement , and representative of most installations. • Track Weather Station: ATC setup equipment to measure and...driver, he felt that the conventional utility truck provide a better, more rigid ride. Acceleration of the vehicle is very poor. The vehicles

  16. ASC Computational Environment (ACE) requirements version 8.0 final report.

    Energy Technology Data Exchange (ETDEWEB)

    Larzelere, Alex R. (Exagrid Engineering, Alexandria, VA); Sturtevant, Judith E.

    2006-11-01

    A decision was made early in the Tri-Lab Usage Model process, that the collection of the user requirements be separated from the document describing capabilities of the user environment. The purpose in developing the requirements as a separate document was to allow the requirements to take on a higher-level view of user requirements for ASC platforms in general. In other words, a separate ASC user requirement document could capture requirements in a way that was not focused on ''how'' the requirements would be fulfilled. The intent of doing this was to create a set of user requirements that were not linked to any particular computational platform. The idea was that user requirements would endure from one ASC platform user environment to another. The hope was that capturing the requirements in this way would assist in creating stable user environments even though the particular platforms would be evolving and changing. In order to clearly make the separation, the Tri-lab S&CS program decided to create a new title for the requirements. The user requirements became known as the ASC Computational Environment (ACE) Requirements.

  17. Validation of the Italian version of the Non-Communicating Children's Pain Checklist-Postoperative Version.

    Science.gov (United States)

    Zanchi, C; Massaro, M; Ferrara, G; Montico, M; D'Osualdo, F; Rutigliano, R; Taddio, A; Vecchi Brumatti, L; Cozzi, G; Barbi, E

    2017-08-22

    This study evaluated the validity and reliability of the Italian version of the Non-Communicating Children's Pain Checklist-Postoperative version (I-NCCPC-PV). The original NCCPC-PV version was translated into Italian following the guidelines for "the translation, adaptation, and validation of instruments or scales for cross-cultural healthcare research". We tested the Italian NCCPC-PV version (I-NCCPC-PV) in 40 children (3-18 years of age) with severe to profound Intellectual Disability and no verbal communication. Each child's behavior was observed by a parent or caregiver and by an external observer in a quiet situation and a painful one. They independently assessed the child's level of pain using the translated Italian version of the NCCPCPV (I-NCCPC-PV). The results from 80 assessments showed that children's behavioral signs differed significantly between painful and calm situations (p Italian version of the NCCPC-PV (I-NCCPC-PV) can be used for pain assessment in children with Intellectual Disability who lack verbal communication.

  18. BUSI 330 Final Examcomplete solutions correct answers key Liberty University

    OpenAIRE

    Laynebaril

    2017-01-01

    BUSI 330 Final Examcomplete solutions correct answers key Liberty University Click Link Below To Buy:   http://hwcampus.com/shop/busi-330-final-exm-complete/             Or Visit www.hwcampus.com   More than two versions Anexpanded marketing mixforservicesthatincludesthefourPs(product,price, promotion,andplaceordistribution)aswellaspeople,physicalenvironment,andprocess, isreferredtoasthe Figure10­5aboveshowsthesequentialprocessofbuildingbrandequity.Thethirdstep...

  19. Kernel versions of some orthogonal transformations

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg

    Kernel versions of orthogonal transformations such as principal components are based on a dual formulation also termed Q-mode analysis in which the data enter into the analysis via inner products in the Gram matrix only. In the kernel version the inner products of the original data are replaced...... by inner products between nonlinear mappings into higher dimensional feature space. Via kernel substitution also known as the kernel trick these inner products between the mappings are in turn replaced by a kernel function and all quantities needed in the analysis are expressed in terms of this kernel...... function. This means that we need not know the nonlinear mappings explicitly. Kernel principal component analysis (PCA) and kernel minimum noise fraction (MNF) analyses handle nonlinearities by implicitly transforming data into high (even infinite) dimensional feature space via the kernel function...

  20. A kernel version of spatial factor analysis

    DEFF Research Database (Denmark)

    Nielsen, Allan Aasbjerg

    2009-01-01

    of PCA and related techniques. An interesting dilemma in reduction of dimensionality of data is the desire to obtain simplicity for better understanding, visualization and interpretation of the data on the one hand, and the desire to retain sufficient detail for adequate representation on the other hand......Based on work by Pearson in 1901, Hotelling in 1933 introduced principal component analysis (PCA). PCA is often used for general feature generation and linear orthogonalization or compression by dimensionality reduction of correlated multivariate data, see Jolliffe for a comprehensive description...... version of PCA handles nonlinearities by implicitly transforming data into high (even infinite) dimensional feature space via the kernel function and then performing a linear analysis in that space. In this paper we shall apply kernel versions of PCA, maximum autocorrelation factor (MAF) analysis...

  1. Disability assessment scale for dementia – long version (DADL-BR

    Directory of Open Access Journals (Sweden)

    Mariana Boaro Fernandez Canon

    2016-04-01

    Full Text Available Introduction: There are no functional assessment tools for elderly with dementia available in the literature that will assess all occupations. Objective: To develop a Long Version of Disability Assessment for Dementia Scale (DADL-Br, covering all occupations provided by the American Association of Occupational Therapy (AOTA and the activities that compose them and evaluate its content validity. Method: With the permission of the original version main author (DAD, Isabelle Gélinas PhD, the new items of the Long Version (DADL-Br were developed based on the classification proposed by AOTA for occupations, considering the gaps in the original instrument. We reviewed the Cultural and Conceptual Equivalence by the Expert Committee and Multidisciplinary Committee. The suggestions of the Committees were accepted and the process followed for the pre-test and author analysis. Results: The first version of the instrument received 10 new fields and 64 new items, which after seven reviews of Cultural Equivalence (average concordance 89.2%, six reviews of Conceptual Equivalence (average concordance 81.2%, tree pre-tests and analysis of the original version main author, has resulted in the development of five versions, addition of twelve items and exclusion of seven items, and the final version consists of 20 fields and 109 items, being 10 new fields and 69 new items. Conclusion: This process conferred the content validity of DADL-Br, which includes all occupations proposed by AOTA and can be a useful tool to evaluate the profile of occupational performance of elderly with dementia.

  2. International Spinal Cord Injury Core Data Set (version 2.0)-including standardization of reporting.

    Science.gov (United States)

    Biering-Sørensen, F; DeVivo, M J; Charlifue, S; Chen, Y; New, P W; Noonan, V; Post, M W M; Vogel, L

    2017-08-01

    The study design includes expert opinion, feedback, revisions and final consensus. The objective of the study was to present the new knowledge obtained since the International Spinal Cord Injury (SCI) Core Data Set (Version 1.0) published in 2006, and describe the adjustments made in Version 2.0, including standardization of data reporting. International. Comments received from the SCI community were discussed in a working group (WG); suggestions from the WG were reviewed and revisions were made. All suggested revisions were considered, and a final version was circulated for final approval. The International SCI Core Data Set (Version 2.0) consists of 25 variables. Changes made to this version include the deletion of one variable 'Total Days Hospitalized' and addition of two variables 'Date of Rehabilitation Admission' and 'Date of Death.' The variable 'Injury Etiology' was extended with six non-traumatic categories, and corresponding 'Date of Injury' for non-traumatic cases, was defined as the date of first physician visit for symptoms related to spinal cord dysfunction. A category reflecting transgender was added. A response category was added to the variable on utilization of ventilatory assistance to document the use of continuous positive airway pressure for sleep apnea. Other clarifications were made to the text. The reporting of the pediatric SCI population was updated as age groups 0-5, 6-12, 13-14, 15-17 and 18-21. Collection of the core data set should be a basic requirement of all studies of SCI to facilitate accurate descriptions of patient populations and comparison of results across published studies from around the world.

  3. New Version of the COCO Program

    Directory of Open Access Journals (Sweden)

    F. Fencl

    1994-09-01

    Full Text Available The new version of the COCO program enables the analysis of linear circuits in symbolical, symbolic numerical or in semi-symbolical form. Simple synthesis problems can also be solved with the aid of this program. Several examples illustrate the use of the program for circuit analysis and synthesis. Modern network elements (trans-impedance operational amplifier, current conveyors are built in the program.

  4. The limits of mathematics tutorial version

    CERN Document Server

    Chaitin, G J

    1995-01-01

    The latest in a series of reports presenting the information-theoretic incompleteness theorems of algorithmic information theory via algorithms written in specially designed versions of LISP. Previously in this LISP code only one-character identifiers were allowed, and arithmetic had to be programmed out. Now identifiers can be many characters long, and arithmetic with arbitrarily large unsigned decimal integers is built in. This and many other changes in the software have made this material much easier to understand and to use.

  5. Spanish version of the Mayer-Salovey-Caruso Emotional Intelligence Test (MSCEIT). Version 2.0: reliabilities, age and gender differences.

    Science.gov (United States)

    Extremera, Natalio; Fernández-Berrocal, Pablo; Salovey, Peter

    2006-01-01

    This study examined the reliability of the Spanish version of the MSCEIT, with a sample of 946 college and high school students (426 males, 520 females) ranging from 16 to 58 years old. After the translation and back-translation process, the objectives of this study were: 1) to examine the reliability of the Spanish version of the MSCEIT v.2.0 at the total scale, area, branch and subscale levels; 2) to analyze the correlations between the methods of scoring in the Spanish version of the MSCEIT v.2.0 at the total scale, area, branch and subscale levels; 3) to examine possible gender differences on MSCEIT scores; and 4) to examine the relationship between age and MSCEIT scores. These analyses revealed good reliability and internal consistency for the Spanish version of the MSCEIT; a high level of convergence between scoring methods; and higher scores obtained by women on overall scale and branches scores than scores obtained by men. A positive correlation between the scores on MSCEIT and age was found. Finally, these results are discussed in light of the limitations of the present study, the implications of the use of this new instrument, and the need for future research on emotional intelligence.

  6. Mission Data System Java Edition Version 7

    Science.gov (United States)

    Reinholtz, William K.; Wagner, David A.

    2013-01-01

    The Mission Data System framework defines closed-loop control system abstractions from State Analysis including interfaces for state variables, goals, estimators, and controllers that can be adapted to implement a goal-oriented control system. The framework further provides an execution environment that includes a goal scheduler, execution engine, and fault monitor that support the expression of goal network activity plans. Using these frameworks, adapters can build a goal-oriented control system where activity coordination is verified before execution begins (plan time), and continually during execution. Plan failures including violations of safety constraints expressed in the plan can be handled through automatic re-planning. This version optimizes a number of key interfaces and features to minimize dependencies, performance overhead, and improve reliability. Fault diagnosis and real-time projection capabilities are incorporated. This version enhances earlier versions primarily through optimizations and quality improvements that raise the technology readiness level. Goals explicitly constrain system states over explicit time intervals to eliminate ambiguity about intent, as compared to command-oriented control that only implies persistent intent until another command is sent. A goal network scheduling and verification process ensures that all goals in the plan are achievable before starting execution. Goal failures at runtime can be detected (including predicted failures) and handled by adapted response logic. Responses can include plan repairs (try an alternate tactic to achieve the same goal), goal shedding, ignoring the fault, cancelling the plan, or safing the system.

  7. Merged Sounding VAP Version 2.0

    Energy Technology Data Exchange (ETDEWEB)

    Troyan, D.; Jensen, M.; Turner, D.; Miloshevich, L.

    2010-03-15

    The Merged Sounding Value-Added Product (VAP) has been in the ARM and ASR pipeline since 2001. Output data streams have been added to the Evaluation Products section of the ARM website for the past five years. Currently, there are data for all of the ACRF fixed sites and all deployments of the Mobile Facility. Fifty-three years of Merged Sounding data is available as an evaluation product. The process of moving all to the ARM Data Archive has been started and will be completed shortly. A second version of the Merged Sounding VAP was developed to address several concerns: (1) Vaisala radiosondes have inherent problems obtaining an accurate measurement of relative humidity, (2) the profile can be extended from 20 km to 60 km above ground level based upon the height achieved by ECMWF profiles, and (3) ECMWF temperatures require adjustments at high altitude (between 1mb and 100 mb). Solutions to these issues have been incorporated in the new version of this VAP. Along with producing that second version of Merged Sounding, a secondary data stream - Sonde Adjust - was created. This VAP incorporates any humidity corrections to the Vaisala RS-80, RS-90, and RS-92 radiosondes. The algorithms used to perform these corrections are documented by Wang et. al. (2002), Turner et. al. (2003), and Miloshevich et. al. (2004, 2009).

  8. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Schuur, Edward [Northern Arizona Univ., Flagstaff, AZ (United States); Luo, Yiqi [Univ. of Oklahoma, Norman, OK (United States)

    2016-12-01

    This final grant report is a continuation of the final grant report submitted for DE-SC0006982 as the Principle Investigator (Schuur) relocated from the University of Florida to Northern Arizona University. This report summarizes the original project goals, as well as includes new project activities that were completed in the final period of the project.

  9. Translation and validation of the Farsi version of Rome III diagnostic questionnaire for the adult functional gastrointestinal disorders.

    Science.gov (United States)

    Toghiani, Ali; Maleki, Iradj; Afshar, Hamid; Kazemian, Amirhossein

    2016-01-01

    The aim of this study was to validate the Farsi version of Rome III modular questionnaire which contains all functional gastrointestinal disorders (FGIDs). We used Rome foundation guidelines for translation of English version into Farsi, and all the steps were performed. In the first step, 2 forward translations into Farsi were completed by two authors separately, and then translators, who participated in Step 1, together with our monitor, compared the two target-language versions and made some changes. The product of Phase 2 was translated back into English by an American-Iranian physician. The final step was comparison of the two English versions and validation of the translation. In this step, we compared the final version item by item, and also we used focus groups of patients after pretesting. Our results showed that FGIDs questionnaire diagnosed 153 patients among 169 patients who were diagnosed to have different types of FGIDs. The sensitivity of this questionnaire was 90.5%. It was determined that the odd questions' values of Cronbach's alpha was 0.77 (very reliable), and it was 0.71 (very reliable) in other sections. The split-half test reliability of whole items value was 0.72, which is statistically significant. Our findings showed that the Farsi version of Rome III diagnostic questionnaire for the adult functional gastrointestinal disorders demonstrated good validity and reliability and could be used in clinical studies.

  10. Translation and validation of the Farsi version of Rome III diagnostic questionnaire for the adult functional gastrointestinal disorders

    Directory of Open Access Journals (Sweden)

    Ali Toghiani

    2016-01-01

    Full Text Available Background: The aim of this study was to validate the Farsi version of Rome III modular questionnaire which contains all functional gastrointestinal disorders (FGIDs. Materials and Methods: We used Rome foundation guidelines for translation of English version into Farsi, and all the steps were performed. In the first step, 2 forward translations into Farsi were completed by two authors separately, and then translators, who participated in Step 1, together with our monitor, compared the two target-language versions and made some changes. The product of Phase 2 was translated back into English by an American-Iranian physician. The final step was comparison of the two English versions and validation of the translation. In this step, we compared the final version item by item, and also we used focus groups of patients after pretesting. Results: Our results showed that FGIDs questionnaire diagnosed 153 patients among 169 patients who were diagnosed to have different types of FGIDs. The sensitivity of this questionnaire was 90.5%. It was determined that the odd questions' values of Cronbach's alpha was 0.77 (very reliable, and it was 0.71 (very reliable in other sections. The split-half test reliability of whole items value was 0.72, which is statistically significant. Conclusion: Our findings showed that the Farsi version of Rome III diagnostic questionnaire for the adult functional gastrointestinal disorders demonstrated good validity and reliability and could be used in clinical studies.

  11. Reliability and validity of the Japanese version of the Resilience Scale and its short version

    Directory of Open Access Journals (Sweden)

    Kondo Maki

    2010-11-01

    Full Text Available Abstract Background The clinical relevance of resilience has received considerable attention in recent years. The aim of this study is to demonstrate the reliability and validity of the Japanese version of the Resilience Scale (RS and short version of the RS (RS-14. Findings The original English version of RS was translated to Japanese and the Japanese version was confirmed by back-translation. Participants were 430 nursing and university psychology students. The RS, Center for Epidemiologic Studies Depression Scale (CES-D, Rosenberg Self-Esteem Scale (RSES, Social Support Questionnaire (SSQ, Perceived Stress Scale (PSS, and Sheehan Disability Scale (SDS were administered. Internal consistency, convergent validity and factor loadings were assessed at initial assessment. Test-retest reliability was assessed using data collected from 107 students at 3 months after baseline. Mean score on the RS was 111.19. Cronbach's alpha coefficients for the RS and RS-14 were 0.90 and 0.88, respectively. The test-retest correlation coefficients for the RS and RS-14 were 0.83 and 0.84, respectively. Both the RS and RS-14 were negatively correlated with the CES-D and SDS, and positively correlated with the RSES, SSQ and PSS (all p Conclusions This study demonstrates that the Japanese version of RS has psychometric properties with high degrees of internal consistency, high test-retest reliability, and relatively low concurrent validity. RS-14 was equivalent to the RS in internal consistency, test-retest reliability, and concurrent validity. Low scores on the RS, a positive correlation between the RS and perceived stress, and a relatively low correlation between the RS and depressive symptoms in this study suggest that validity of the Japanese version of the RS might be relatively low compared with the original English version.

  12. Final Focus Test Stand final report

    CERN Document Server

    Jeremie, A; Burrows, P

    2013-01-01

    Future Linear colliders will need particle beam sizes in the nanometre range. The beam also needs to be stable all along the beam line and especially at the Final Focus section. A dedicated Final Focus test stand has been used for this study and is comprised of several sub-parts. First there is the Stabilisation/Isolation system with sensors and actuators stabilizing down to sub-nanometre level. Then the Magnet itself needs to comply with very specific design constraints. In addition to the mechanical items, the beam can be stabilized acting on the trajectory directly and Beam-based controls have been developed and tested on different accelerator facilities.

  13. Interactive tag cloud visualization of software version control repositories

    CSIR Research Space (South Africa)

    Greene, GJ

    2015-09-01

    Full Text Available Visualization of Software: Version Control Repositories Gillian J. Greene and Bernd Fischer Abstract: Version control repositories contain a wealth of implicit information that can be used to answer many questions about a project’s development process...

  14. Global Historical Climatology Network - Monthly (GHCN-M), Version 2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Please note, the temperature portion of this dataset has been superseded by a newer version. Users should not use this version except in rare cases (e.g., when...

  15. National Land Cover Database 2001 Version 2: 1985-2006

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The National Land Cover Database 2001 Version 2 (NLCD 2001 Version 2) is being compiled across all 50 states and Puerto Rico as a cooperative mapping effort of the...

  16. National Land Cover Database 2001 Version 2: 1985-2006

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The National Land Cover Database 2001 Version 2 (NLCD 2001 Version 2) is being compiled across all 50 states and Puerto Rico as a cooperative mapping effort of the...

  17. Retranslation Studies on Three Chinese Versions of The Dead from the Perspective of Literary Stylistics

    Institute of Scientific and Technical Information of China (English)

    ZHOU Lei

    2015-01-01

    Literary stylistics, based on linguistics and literary criticism has developed into a new discipline, which is one important method to analyze the fiction translation. The study on retranslation in the perspective of literary stylistics is new. The Dead is the final and best-known story of Dubliners. This paper aims to analyze three Chinese versions of The Dead in the perspective of liter⁃ary stylistics in order to test the validity of retranslation hypothesis.

  18. Translation, cross-cultural adaptation, and reproducibility of the Brazilian portuguese-language version of the Wisconsin Smoking Withdrawal Scale.

    Science.gov (United States)

    Oliveira Junior, Boanerges Lopes de; Jardim, José Roberto; Nascimento, Oliver Augusto; Souza, George Márcio da Costa e; Baker, Timothy B; Santoro, Ilka Lopes

    2012-01-01

    To cross-culturally adapt the Wisconsin Smoking Withdrawal Scale (WSWS) for use in Brazil and evaluate the reproducibility of the new (Brazilian Portuguese-language) version. The original English version of the WSWS was translated into Brazilian Portuguese. For cross-cultural adaptation, the Brazilian Portuguese-language version of the WSWS was administered to eight volunteers, all of whom were smokers. After adjustments had been made, the WSWS version was back-translated into English. The Brazilian Portuguese-language version was thereby found to be accurate. The final Brazilian Portuguese-language version of the WSWS was applied to 75 smokers at three distinct times. For the assessment of interobserver reproducibility, it was applied twice within a 30-min interval by two different interviewers. For the assessment of intraobserver reproducibility, it was applied again 15 days later by one of the interviewers. Intraclass correlation coefficients (ICCs) were used in order to test the concordance of the answers. The significance level was set at p Portuguese-language version of the WSWS is reproducible, fast, and simple. It can therefore be used as a tool for assessing the severity of the symptoms of nicotine withdrawal syndrome.

  19. Design of a Modular E-Core Flux Concentrating Axial Flux Machine: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Husain, Tausif; Sozer, Yilmaz; Husain, Iqbal; Muljadi, Eduard

    2015-08-24

    In this paper a novel E-Core axial flux machine is proposed. The machine has a double-stator, single-rotor configuration with flux-concentrating ferrite magnets and pole windings across each leg of an E-Core stator. E-Core stators with the proposed flux-concentrating rotor arrangement result in better magnet utilization and higher torque density. The machine also has a modular structure facilitating simpler construction. This paper presents a single-phase and a three-phase version of the E-Core machine. Case studies for a 1.1-kW, 400-rpm machine for both the single-phase and three-phase axial flux machines are presented. The results are verified through 3D finite element analysis. facilitating simpler construction. This paper presents a single-phase and a three-phase version of the E-Core machine. Case studies for a 1.1-kW, 400-rpm machine for both the single-phase and three-phase axial flux machines are presented. The results are verified through 3D finite element analysis.

  20. Cassini's Grand Finale: The Final Orbits

    Science.gov (United States)

    Spilker, Linda; Edgington, Scott

    2016-04-01

    The Cassini-Huygens mission, a joint collaboration between NASA, ESA and the Italian Space Agency, is approaching its last year of operations after nearly 12 years in orbit around Saturn. Cassini will send back its final bits of unique data on September 15th, 2017 as it plunges into Saturn's atmosphere, vaporizing and satisfying planetary protection requirements. Before that time Cassini will continue its legacy of exploration and discovery with 12 close flybys of Titan in 2016 and 2017 that will return new science data as well as sculpt the inclinations and periods of the final orbits. Even though all of our close icy satellite flybys, including those of Enceladus, are now completed, numerous Voyager-class flybys (summer solstice approaches. In November 2016 Cassini will transition to a series of orbits with peripases just outside Saturn's F ring. These 20 orbits will include close flybys of some tiny ring moons and excellent views of the F ring and outer A ring. The 126th and final close flyby of Titan will propel Cassini across Saturn's main rings and into its final orbits. Cassini's Grand Finale, starting in April 2017, is comprised of 22 orbits at an inclination of 63 degrees. Cassini will repeatedly dive between the innermost rings and the upper atmosphere of the planet providing insights into fundamental questions unattainable during the rest of the mission. Cassini will be the first spacecraft to explore this region. These close orbits provide the highest resolution observations of both the rings and Saturn, and direct in situ sampling of the ring particles, composition, plasma, Saturn's exosphere and the innermost radiation belts. Saturn's gravitational field will be measured to unprecedented accuracy, providing information on the interior structure of the planet, winds in the outer layers of Saturn's atmosphere, and the mass distribution in the rings. Probing the magnetic field will give insight into the nature of the magnetic dynamo, telling us: why the

  1. 16 CFR 460.7 - Which test version to use.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Which test version to use. 460.7 Section 460.7 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES LABELING AND ADVERTISING OF HOME INSULATION § 460.7 Which test version to use. Use the version of the ASTM test method that was...

  2. The Lagrangian particle dispersion model FLEXPART version 10

    Science.gov (United States)

    Pisso, Ignacio; Sollum, Espen; Grythe, Henrik; Kristiansen, Nina; Cassiani, Massimo; Eckhardt, Sabine; Thompson, Rona; Groot Zwaaftnik, Christine; Evangeliou, Nikolaos; Hamburger, Thomas; Sodemann, Harald; Haimberger, Leopold; Henne, Stephan; Brunner, Dominik; Burkhart, John; Fouilloux, Anne; Fang, Xuekun; Phillip, Anne; Seibert, Petra; Stohl, Andreas

    2017-04-01

    The Lagrangian particle dispersion model FLEXPART was in its first original release in 1998 designed for calculating the long-range and mesoscale dispersion of air pollutants from point sources, such as after an accident in a nuclear power plant. The model has now evolved into a comprehensive tool for atmospheric transport modelling and analysis. Its application fields are extended to a range of atmospheric transport processes for both atmospheric gases and aerosols, e.g. greenhouse gases, short-lived climate forces like black carbon, volcanic ash and gases as well as studies of the water cycle. We present the newest release, FLEXPART version 10. Since the last publication fully describing FLEXPART (version 6.2), the model code has been parallelised in order to allow for the possibility to speed up computation. A new, more detailed gravitational settling parametrisation for aerosols was implemented, and the wet deposition scheme for aerosols has been heavily modified and updated to provide a more accurate representation of this physical process. In addition, an optional new turbulence scheme for the convective boundary layer is available, that considers the skewness in the vertical velocity distribution. Also, temporal variation and temperature dependence of the OH-reaction are included. Finally, user input files are updated to a more convenient and user-friendly namelist format, and the option to produce the output-files in netCDF-format instead of binary format is implemented. We present these new developments and show recent model applications. Moreover, we also introduce some tools for the preparation of the meteorological input data, as well as for the processing of FLEXPART output data.

  3. Fuzzy Versions of Epistemic and Deontic Logic

    Science.gov (United States)

    Gounder, Ramasamy S.; Esterline, Albert C.

    1998-01-01

    Epistemic and deontic logics are modal logics, respectively, of knowledge and of the normative concepts of obligation, permission, and prohibition. Epistemic logic is useful in formalizing systems of communicating processes and knowledge and belief in AI (Artificial Intelligence). Deontic logic is useful in computer science wherever we must distinguish between actual and ideal behavior, as in fault tolerance and database integrity constraints. We here discuss fuzzy versions of these logics. In the crisp versions, various axioms correspond to various properties of the structures used in defining the semantics of the logics. Thus, any axiomatic theory will be characterized not only by its axioms but also by the set of properties holding of the corresponding semantic structures. Fuzzy logic does not proceed with axiomatic systems, but fuzzy versions of the semantic properties exist and can be shown to correspond to some of the axioms for the crisp systems in special ways that support dependency networks among assertions in a modal domain. This in turn allows one to implement truth maintenance systems. For the technical development of epistemic logic, and for that of deontic logic. To our knowledge, we are the first to address fuzzy epistemic and fuzzy deontic logic explicitly and to consider the different systems and semantic properties available. We give the syntax and semantics of epistemic logic and discuss the correspondence between axioms of epistemic logic and properties of semantic structures. The same topics are covered for deontic logic. Fuzzy epistemic and fuzzy deontic logic discusses the relationship between axioms and semantic properties for these logics. Our results can be exploited in truth maintenance systems.

  4. Data Identifiers, Versioning, and Micro-citation

    Science.gov (United States)

    Parsons, M. A.; Duerr, R. E.

    2012-12-01

    Data citation, especially using Digital Object Identifiers (DOIs), is an increasingly accepted scientific practice. For example, the AGU Council asserts that data "publications" should "be credited and cited like the products of any other scientific activity," and Thomson Reuters has recently announced a data citation index built from DOIs assigned to data sets. Correspondingly, formal guidelines for how to cite a data set (using DOIs or similar identifiers/locators) have recently emerged, notably those from the international DataCite consortium, the UK Digital Curation Centre, and the US Federation of Earth Science Information Partners. These different data citation guidelines are largely congruent. They agree on the basic practice and elements of data citation, especially for relatively static, whole data collections. There is less agreement on some of the more subtle nuances of data citation. They define different methods for handling different data set versions, especially for the very dynamic, growing data sets that are common in Earth Sciences. They also differ in how people should cite specific, arbitrarily large elements, "passages," or subsets of a larger data collection, i.e., the precise data records actually used in a study. This detailed "micro-citation", and careful reference to exact versions of data are essential to ensure scientific reproducibility. Identifiers such as DOIs are necessary but not sufficient for the precise, detailed, references necessary. Careful practice must be coupled with the use of curated identifiers. In this paper we review the pros and cons of different approaches to versioning and micro-citation. We suggest a workable solution for most existing Earth science data and suggest a more rigorous path forward for the future.

  5. UQTk version 2.0 user manual.

    Energy Technology Data Exchange (ETDEWEB)

    Debusschere, Bert J.; Sargsyan, Khachik; Safta, Cosmin

    2013-10-01

    The UQ Toolkit (UQTk) is a collection of libraries and tools for the quanti cation of uncer- tainty in numerical model predictions. Version 2.0 o ers intrusive and non-intrusive methods for propagating input uncertainties through computational models, tools for sensitivity anal- ysis, methods for sparse surrogate construction, and Bayesian inference tools for inferring parameters from experimental data. This manual discusses the download and installation process for UQTk, provides pointers to the UQ methods used in the toolkit, and describes some of the examples provided with the toolkit.

  6. A GENERALIZED VERSION OF PLAY FAIR CIPHER

    Directory of Open Access Journals (Sweden)

    Jitendra Choudhary

    2013-06-01

    Full Text Available In this paper, we have generalized and modified the play fair cipher. We have introduced confusion and diffusion. The cryptanalysis carried out in this analysis has shown that the proposed play fair cipher is a strong one. The role of cryptography in today’s world is increasing day by day. Information is flowing from are place to another on the network. One most common cryptography technique is substitution cipher. Play fair is most common substitution cipher. In this paper, we present a generalized version of play fair ciphers. Encryption/decryption is a very popular task. We also explain the fundamentals of sequential cryptography.

  7. ALT-3 Target & CMU Version 4

    Energy Technology Data Exchange (ETDEWEB)

    Griego, Jeffrey R [Los Alamos National Laboratory; Atchison, Walter L. [Los Alamos National Laboratory; Holtkamp, David [Los Alamos National Laboratory; Oro, David M. [Los Alamos National Laboratory; Reinovsky, Robert E. [Los Alamos National Laboratory; Rousculp, Christopher L. [Los Alamos National Laboratory; Tabaka, Leonard J. [Los Alamos National Laboratory

    2012-06-11

    The third Advance Liner Technology (ALT-3) experiment is the next in a long tradition of collaborations between LANL and RFNC/VNIIEF in high-explosive pulsed-power. Here a VNIIEF provided Disk Explosive Magnetic Generator (DEMG) will drive a LANL provided experimental load and diagnostic package. The objective of the experiment is to explore the use of a cylindrical liner-ontarget in tera-Pascal equation of state measurement. This presentation will discuss version 4 of the experimental target and central measuring unit (CMU) along with R & D already performed in fabrication of the target.

  8. Python pocket reference, version 2.4

    CERN Document Server

    Lutz, Mark

    2005-01-01

    Python is optimized for quality, productivity, portability, and integration. Hundreds of thousands of Python developers around the world rely on Python for general-purpose tasks, Internet scripting, systems programming, user interfaces, and product customization. Available on all major computing platforms, including commercial versions of Unix, Linux, Windows, and Mac OS X, Python is portable, powerful and remarkable easy to use. With its convenient, quick-reference format, Python Pocket Reference, 3rd Edition is the perfect on-the-job reference. More importantly, it's now been refreshed

  9. A Functional Version of the ARCH Model

    CERN Document Server

    Hormann, Siegfried; Reeder, Ron

    2011-01-01

    Improvements in data acquisition and processing techniques have lead to an almost continuous flow of information for financial data. High resolution tick data are available and can be quite conveniently described by a continuous time process. It is therefore natural to ask for possible extensions of financial time series models to a functional setup. In this paper we propose a functional version of the popular ARCH model. We will establish conditions for the existence of a strictly stationary solution, derive weak dependence and moment conditions, show consistency of the estimators and perform a small empirical study demonstrating how our model matches with real data.

  10. An Introduction to Version Control Using GitHub Desktop

    Directory of Open Access Journals (Sweden)

    Daniel van Strien

    2016-06-01

    Full Text Available In this lesson you will be introduced to the basics of version control, understand why it is useful and implement basic version control for a plain text document using GitHub Desktop. By the end of this lesson you should understand: * what version control is and why it can be useful * the differences between Git and GitHub * how to implement version control using ‘GitHub Desktop,’ a Graphical User Interface for GitHub * be aware of other resources that will help you implement version control in your academic writing

  11. Two Mathematically Equivalent Versions of Maxwell's Equations

    Science.gov (United States)

    Gill, Tepper L.; Zachary, Woodford W.

    2011-01-01

    This paper is a review of the canonical proper-time approach to relativistic mechanics and classical electrodynamics. The purpose is to provide a physically complete classical background for a new approach to relativistic quantum theory. Here, we first show that there are two versions of Maxwell's equations. The new version fixes the clock of the field source for all inertial observers. However now, the (natural definition of the effective) speed of light is no longer an invariant for all observers, but depends on the motion of the source. This approach allows us to account for radiation reaction without the Lorentz-Dirac equation, self-energy (divergence), advanced potentials or any assumptions about the structure of the source. The theory provides a new invariance group which, in general, is a nonlinear and nonlocal representation of the Lorentz group. This approach also provides a natural (and unique) definition of simultaneity for all observers. The corresponding particle theory is independent of particle number, noninvariant under time reversal (arrow of time), compatible with quantum mechanics and has a corresponding positive definite canonical Hamiltonian associated with the clock of the source. We also provide a brief review of our work on the foundational aspects of the corresponding relativistic quantum theory. Here, we show that the standard square-root and Dirac equations are actually two distinct spin- 1/2 particle equations.

  12. Large Format Additively Manufactured Tooling for Out of Autoclave Aerospace Composites (Preprint)

    Science.gov (United States)

    2017-02-23

    final print. The efficiency in arriving at successful prints allowed both the LCAAT leading edge tool and the Navy tool to be printed using the PS/CF2...following organizations for their financial support of this effort: America Makes, Ohio Third Frontier , Ohio Federal Research Network, and the United

  13. On the Search for Transits of the Planets Orbiting GL 876 [PREPRINT

    Science.gov (United States)

    2006-08-13

    their radii would also give clues to their interior structure (see Charbon - neau et al. 2006). Finally, the Gl 876 system with its strongly gravita...work supported by the National Aeronautics and Space Administration under Grant NNG04GN30G issued through the Origins of So- lar Systems Program to GL

  14. [French version of TASTE (test for the ability and evaluation)].

    Science.gov (United States)

    Masson, A M; Cadot, M; Pereira, A M; Depreeuw, E; Ansseau, M

    2001-01-01

    student's profiles. The French version of 5 factors finally gives results in agreement with the original. The items (10 per factor) are selected according to their highest specificity and after elimination of redundancy. Validity remains in the short version, making it more useful in clinical practice.

  15. LIP: The Livermore Interpolation Package, Version 1.4

    Energy Technology Data Exchange (ETDEWEB)

    Fritsch, F N

    2011-07-06

    to functions that interpolate or invert the interpolant at an arbitrary number of points. The first section of this report describes the overall design of the package, including both forward and inverse interpolation. Sections 2-6 describe each interpolation method in detail. The software that implements this design is summarized function-by-function in Section 7. For a complete example of package usage, refer to Section 8. The report concludes with a few brief notes on possible software enhancements. For guidance on adding other functional forms to LIP, refer to Appendix B. The reader who is primarily interested in using LIP to solve a problem should skim Section 1, then skip to Sections 7.1-4. Finally, jump ahead to Section 8 and study the example. The remaining sections can be referred to in case more details are desired. Changes since version 1.1 of this document include the new Section 3.2.1 that discusses derivative estimation and new Section 6 that discusses the birational interpolation method. Section numbers following the latter have been modified accordingly.

  16. Psychometric Validation of the Bangla Version of the Patient-Doctor Relationship Questionnaire

    Directory of Open Access Journals (Sweden)

    S. M. Yasir Arafat

    2016-01-01

    Full Text Available Background. The patient-doctor relationship is an important issue in health care as it is linked to patient satisfaction, treatment adherence, and treatment outcome. The PDRQ-9 is brief instrument which has an excellent overall internal consistency to measure it. Objective. It was aimed at developing a culturally adapted and validated Bangla version of Patient-Doctor Relationship Questionnaire (PDRQ-9. Method. Data were collected during the period of May 2015 to July 2015 from 50 patients by interviewing with the final Bangla version of PDRQ-9 obtained by ideal translation-back translation procedure with nonprobability purposive consecutive sampling and analyzed by Statistical Package of Social Science (SPSS 16.0 and Microsoft Excel 2007 version software. Result. The internal consistency of Bangla PDRQ-9 was measured by Cronbach’s α which was 0.97. Only one factor was extracted from varimax rotation factor analysis with high commonalities between the items. Conclusion. Bangla version of PDRQ-9 is valid, accepted, and widely applicable in clinical practice, research, public health, and primary health care in Bangladesh.

  17. Cross-cultural adaptation of the Brazilian version of the Eating Assessment Tool - EAT-10.

    Science.gov (United States)

    Gonçalves, Maria Inês Rebelo; Remaili, Carla Bogossian; Behlau, Mara

    2013-12-16

    The Eating Assessment Tool (EAT-10) was conceptually developed in the United States from data collected from 482 patients, for use as a self-administered survey regarding risk identification of dysphagia and symptoms related to clinical response to treatment. The purpose of this study is to present the cultural equivalence of the Brazilian version of the EAT-10. The process followed the Scientific Advisory Committee of Medical Outcome Trust (SACMOT). The questionnaire was translated by two Brazilian bilingual speech-language pathologists, aware of the purpose of this study. A back translation was performed by a third Brazilian speech-language pathologist, bilingual and English teacher that had not participated in the previous stage. After comparing both translations, a final version of the questionnaire was produced and called Instrumento de Autoavaliação da Alimentação (EAT-10). It was administered to 107 adult inpatients of the Hospital São Paulo, cwith request for bedside clinical evaluation of swallow. During the process of translation and cultural adaptation, no item was modified and/or suppressed. The EAT-10 maintained the same structure as the original American English version with ten questions, of which three of functional domain, three of emotional domain and four of physical symptoms domain. The cultural equivalence of the Brazilian version of the EAT-10 was demonstrated, being a score of three points or above it the cutoff for dysphagia risk, also for the Brazilian population.

  18. Validation of the Malay Version of the Inventory of Functional Status after Childbirth Questionnaire

    Directory of Open Access Journals (Sweden)

    Norhayati Mohd Noor

    2015-01-01

    Full Text Available Objective. This study was designed to examine the psychometric properties of Malay version of the Inventory of Functional Status after Childbirth (IFSAC. Design. A cross-sectional study. Materials and Methods. A total of 108 postpartum mothers attending Obstetrics and Gynaecology Clinic, in a tertiary teaching hospital in Malaysia, were involved. Construct validity and internal consistency were performed after the translation, content validity, and face validity process. The data were analyzed using Analysis of Moment Structure version 18 and Statistical Packages for the Social Sciences version 20. Results. The final model consists of four constructs, namely, infant care, personal care, household activities, and social and community activities, with 18 items demonstrating acceptable factor loadings, domain to domain correlation, and best fit (Chi-squared/degree of freedom = 1.678; Tucker-Lewis index = 0.923; comparative fit index = 0.936; and root mean square error of approximation = 0.080. Composite reliability and average variance extracted of the domains ranged from 0.659 to 0.921 and from 0.499 to 0.628, respectively. Conclusion. The study suggested that the four-factor model with 18 items of the Malay version of IFSAC was acceptable to be used to measure functional status after childbirth because it is valid, reliable, and simple.

  19. TOUGH2-GRS version 1. User manual

    Energy Technology Data Exchange (ETDEWEB)

    Navarro, Martin; Eckel, Jens

    2016-07-15

    TOUGH2 is a code for the simulation of multi-phase flow processes in porous media that has been developed by the Lawrence Berkeley National Laboratory, California, USA. Since 1991, GRS has been using the code for process analyses and safety assessments for deep geological repositories and has extended the code by several processes that are relevant for repository systems. The TOUGH2 source code that has been developed further by GRS is referred to as TOUGH2-GRS. The present report presents code version 1.1.g, which was developed in project UM13 A 03400 sponsored by the German Federal Ministry for the Environment, Nature Conservation, Building and Nuclear Safety (BMUB).

  20. FLEXAN (version 2.0) user's guide

    Science.gov (United States)

    Stallcup, Scott S.

    1989-01-01

    The FLEXAN (Flexible Animation) computer program, Version 2.0 is described. FLEXAN animates 3-D wireframe structural dynamics on the Evans and Sutherland PS300 graphics workstation with a VAX/VMS host computer. Animation options include: unconstrained vibrational modes, mode time histories (multiple modes), delta time histories (modal and/or nonmodal deformations), color time histories (elements of the structure change colors through time), and rotational time histories (parts of the structure rotate through time). Concurrent color, mode, delta, and rotation, time history animations are supported. FLEXAN does not model structures or calculate the dynamics of structures; it only animates data from other computer programs. FLEXAN was developed to aid in the study of the structural dynamics of spacecraft.

  1. Forsmark - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  2. An approximate version of Sidorenko's conjecture

    CERN Document Server

    Conlon, David; Sudakov, Benny

    2010-01-01

    A beautiful conjecture of Erd\\H{o}s-Simonovits and Sidorenko states that if H is a bipartite graph, then the random graph with edge density p has in expectation asymptotically the minimum number of copies of H over all graphs of the same order and edge density. This conjecture also has an equivalent analytic form and has connections to a broad range of topics, such as matrix theory, Markov chains, graph limits, and quasirandomness. Here we prove the conjecture if H has a vertex complete to the other part, and deduce an approximate version of the conjecture for all H. Furthermore, for a large class of bipartite graphs, we prove a stronger stability result which answers a question of Chung, Graham, and Wilson on quasirandomness for these graphs.

  3. The Classical Version of Stokes' Theorem Revisited

    DEFF Research Database (Denmark)

    Markvorsen, Steen

    2005-01-01

    Using only fairly simple and elementary considerations - essentially from first year undergraduate mathematics - we prove that the classical Stokes' theorem for any given surface and vector field in $\\mathbb{R}^{3}$ follows from an application of Gauss' divergence theorem to a suitable modification...... of the vector field in a tubular shell around the given surface. The intuitive appeal of the divergence theorem is thus applied to bootstrap a corresponding intuition for Stokes' theorem. The two stated classical theorems are (like the fundamental theorem of calculus) nothing but shadows of the general version...... to above. Our proof that Stokes' theorem follows from Gauss' divergence theorem goes via a well known and often used exercise, which simply relates the concepts of divergence and curl on the local differential level. The rest of the paper uses only integration in $1$, $2$, and $3$ variables together...

  4. The classical version of Stokes' Theorem revisited

    DEFF Research Database (Denmark)

    Markvorsen, Steen

    2008-01-01

    Using only fairly simple and elementary considerations - essentially from first year undergraduate mathematics - we show how the classical Stokes' theorem for any given surface and vector field in $\\mathbb{R}^{3}$ follows from an application of Gauss' divergence theorem to a suitable modification...... of the vector field in a tubular shell around the given surface. The two stated classical theorems are (like the fundamental theorem of calculus) nothing but shadows of the general version of Stokes' theorem for differential forms on manifolds. The main points in the present paper, however, is firstly...... exercise, which simply relates the concepts of divergence and curl on the local differential level. The rest of the paper uses only integration in $1$, $2$, and $3$ variables together with a 'fattening' technique for surfaces and the inverse function theorem....

  5. The Turkish version of Maternal Attachment Inventory

    Directory of Open Access Journals (Sweden)

    Oya Kavlak

    2009-01-01

    Full Text Available Objective: The research has been designed as methodological with purpose of the validity and the reliability of the Turkish language version of Maternal Attachment Inventory on mothers within one and four months postpartum. Method: This study was carried out with mothers registered at 19 Health Clinics and three Maternal-Child Health and Family Planning Clinics in which connected to Bornova Health Presidency in Izmir. The sample of research has been composed three clinics in which determined with the purposive sampling technique. First stage, the research was studied on 165 mothers when their babies were approximately 30-40 days old in these registered clinics.At the second stage of research has been interviewed again with 78 mothers when their babies were approximately 90-105 days old.Results: It is determined that experts consensuses about content of items as a result of analysis (Kendall’s W=0.274, p=0.001

  6. Children's Sleep Habits Questionnaire - Infant Version.

    Science.gov (United States)

    Dias, Cláudia Castro; Figueiredo, Bárbara; Pinto, Tiago Miguel

    2017-08-23

    This study proposed a version of the Children's Sleep Habits Questionnaire for infants under 12 months (CSHQ-I). The sample was comprised of 299 infants, aged between 2 weeks and 12 months. Exploratory factor analysis revealed four subscales: Bedtime Resistance, Sleep Anxiety, Positive Sleep Habits, and Daytime Sleepiness. The CSHQ-I total scale presented good test-retest reliability and internal consistency. The CSHQ-I also showed good concurrent validity, with significant associations found between the CSHQ-I total scale and subscales and a measure of infant sleep-wake behaviors. The present study suggested the CSHQ-I as a reliable instrument to assess sleep problems in infants during the first year of life. Copyright © 2017 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

  7. Zgoubi user`s guide. Version 4

    Energy Technology Data Exchange (ETDEWEB)

    Meot, F. [Fermi National Accelerator Lab., Batavia, IL (United States). Dept. of Physics; Valero, S. [CEA, Gif-sur-Yvette (France)

    1997-10-15

    The computer code Zgoubi calculates trajectories of charged particles in magnetic and electric fields. At the origin specially adapted to the definition and adjustment of beam lines and magnetic spectrometers, it has so-evolved that it allows the study of systems including complex sequences of optical elements such as dipoles, quadrupoles, arbitrary multipoles and other magnetic or electric devices, and is able as well to handle periodic structures. Compared to other codes, it presents several peculiarities: (1) a numerical method for integrating the Lorentz equation, based on Taylor series, which optimizes computing time and provides high accuracy and strong symplecticity, (2) spin tracking, using the same numerical method as for the Lorentz equation, (3) calculation of the synchrotron radiation electric field and spectra in arbitrary magnetic fields, from the ray-tracing outcomes, (4) the possibility of using a mesh, which allows ray-tracing from simulated or measured (1-D, 2-D or 3-D) field maps, (5) Monte Carlo procedures: unlimited number of trajectories, in-flight decay, etc. (6) built-in fitting procedure, (7) multiturn tracking in circular accelerators including many features proper to machine parameter calculation and survey, and also the simulation of time-varying power supplies. The initial version of the Code, dedicated to the ray-tracing in magnetic fields, was developed by D. Garreta and J.C. Faivre at CEN-Saclay in the early 1970`s. It was perfected for the purpose of studying the four spectrometers (SPES I, II, III, IV) at the Laboratoire National Saturne (CEA-Saclay, France), and SPEG at Ganil (Caen, France). It is now in use in several national and foreign laboratories. This manual is intended only to describe the details of the most recent version of Zogoubi, which is far from being a {open_quotes}finished product{close_quotes}.

  8. World Digital Magnetic Anomaly Map version 2 (WDMAM v.2) - released for research and education

    Science.gov (United States)

    CHOI-Dyment, Y.; Lesur, V.; Dyment, J.; Hamoudi, M.; Thebault, E.; Catalan, M.

    2015-12-01

    The World Digital Magnetic Anomaly Map is an international initiative carried out under the auspices of the International Association of Geomagnetism and Aeronomy (IAGA) and the Commission for the Geological Map of the World (CGMW). A first version of the map has been published and distributed eight years ago (WDMAM v1; Korhonen et al., 2007). We have produced a candidate which has been accepted as the second version of this map (WDMAM v2) at the International Union of Geophysics and Geodesy in Prag, in June 2015. On land, we adopted an alternative approach avoiding any unnecessary processing on existing aeromagnetic compilations. When available, we used the original aeromagnetic data. As a result the final compilation remains an acceptable representation of the national and international data grids. Over oceanic areas the marine data have been extended. In areas of insufficient data coverage, a model has been computed based on a modified digital grid of the oceanic lithosphere age, considering plate motions in the determination of magnetization vector directions. This model has been further adjusted to the available data, resulting in a better representation of the anomalies. The final grid will be periodically upgraded. Version 2.0 has been released and is available at wdmam.org to support both research and education projects. Colleagues willing to contribute data for future releases (and become a co-author of the map) should contact any of the authors or Jerome Dyment (chair of the WDMAM Task Force) at jdy@ipgp.fr .

  9. Version 3 of the GEOMAGIA50 Paleomagnetic Database

    Science.gov (United States)

    Brown, M. C.; Donadini, F.; Nilsson, A.; Korte, M. C.; Panovska, S.; Frank, U.; Korhonen, K.; Lodge, A.; Lengyel, S. N.; Schuberth, M.; Constable, C.

    2015-12-01

    Version 3 of GEOMAGIA50 is the product of an international collaboration to develop a comprehensive online database that allows easy access to published paleomagnetic and chronological data from the past 50 ka. The overarching scientific goal is to improve our understanding of changes in the geomagnetic field, with applications ranging from the deep Earth, to past environments and climate, to the interaction of the geomagnetic field with the space environment. We present the large range of modifications made to the database since its initial release in 2006. The most significant is the addition of paleomagnetic, rock magnetic and chronological data obtained from lake and marine sediments. An emphasis has been placed on geochronological data from sediments and the database includes comprehensive radiocarbon age data, oxygen isotope data, varve ages and tephra ages. In the archeomagnetic and volcanic database, the amount of declination, inclination and paleointensity data has been increased greatly and now exceeds 15,000. In addition, a number of new metadata fields have been added, e.g., more specific information about the archaeological or volcanic sites the data were obtained from. Finally, the web interface has been updated. This includes a new query form for the sediment database and improved functionality of the archeomagnetic and volcanic query form. The webpage can be found at found at http://geomagia.gfz-potsdam.de.

  10. Brazilian version of the Body Dysmorphic Disorder Examination

    Directory of Open Access Journals (Sweden)

    Renata Trajano Borges Jorge

    Full Text Available CONTEXT AND OBJECTIVE: Body image improvement is considered to be the main reason for undergoing plastic surgery. The objective was to translate the Body Dysmorphic Disorder Examination (BDDE into Brazilian Portuguese and to adapt and validate this questionnaire for use in Brazil. DESIGN AND SETTING: Cross-sectional survey, at the Department of Plastic Surgery of Universidade Federal de São Paulo. METHODS: The BDDE was first translated into Portuguese and then back-translated into English. These translations were then discussed by healthcare professionals in order to establish the final Brazilian version. In a second stage, the validity and reliability of the BDDE were assessed. For this, patients were initially interviewed by two interviewers and subsequently, by only one of these interviewers. On the first occasion, in addition to the BDDE, the body shape questionnaire (BSQ and the Rosenberg self-esteem scale were also applied. These questionnaires were applied to 90 patients. RESULTS: Six questions were modified during the assessment of cultural equivalence. Cronbach's alpha was 0.89 and the intraclass correlation coefficients for interobserver and test-retest reliability were 0.91 and 0.87, respectively. Pearson's coefficient showed no correlation between the BDDE and the Rosenberg self-esteem scale (0.22, whereas there was a moderate correlation between the BDDE and the BSQ (0.64. CONCLUSIONS: The BDDE was successfully translated and adapted, with good internal consistency, reliability and construct validity.

  11. [SURPS French version validation in a Quebec adolescent population].

    Science.gov (United States)

    Castonguay-Jolin, Laura; Perrier-Ménard, Eveline; Castellanos-Ryan, Natalie; Parent, Sophie; Vitaro, Frank; Tremblay, Richard E; Garel, Patricia; Séguin, Jean R; Conrod, Patricia J

    2013-09-01

    Objective: The Substance Use Risk Profile Scale (SURPS) has been developed to screen personality risk factors for substance misuse. This scale assesses 4 high-risk personality traits using a 23-item, self-report questionnaire. SURPS helps guiding targeted approaches to prevention of substance abuse and misuse. It has been validated in the United Kingdom, English Canada, Sri Lanka, and China. This study aims to validate this scale in a sample of French-speaking adolescents from Quebec as well as its sensitivity in a clinical sample of adolescents. Method: Two hundred two 15-year-old youths from a community sample completed a French version of SURPS as well as other measures of personality and substance use. This study reports the internal consistency and concurrent validity of the scale, as well as a factor analysis of items. Further, 40 youths (mean age 15.7 years) from a clinical population completed SURPS and their scores were compared with those of the community sample. Results: SURPS French translation has good internal consistency and demonstrated a 4-factor structure very similar to the original scale. The 4 subscales show good concurrent validity, and 3 of the subscales were found to correlate with measures of substance use. Finally, 95% of the clinical sample was identified at high risk for substance misuse according to SURPS cut-off scores. Conclusion: SURPS French translation seems to be a valid and sensitive scale that can be used in a French-speaking adolescent population from Quebec.

  12. OSIRIS 4.0: new version of the OSIRIS framework

    Science.gov (United States)

    Fonseca, Ricardo; Tableman, Adam; Vieira, Jorge; Decyk, Viktor; Mori, Warren; Silva, LuíS.

    2016-10-01

    OSIRIS is a state of the art, fully relativistic massively parallel particle in cell code, that is widely used in kinetic plasma modeling for many astrophysical and laboratory scenarios. Over the years the code has been continuously improved, adding new features and algorithms, resulting in a large and complex code base with the inherent difficulties on maintenance and development. We report on the new version of the OSIRIS framework, focusing on the new structure of the code that leverages on the object oriented features of Fortran 2003, that are now widely supported by available compilers. Details on the new object-oriented structure, that allows for the encapsulation of specific features, and better collaboration between the development team, are given. We also focus on the new strategy for run-time selection of simulation mode, that allows for a single binary to be used with all code features, and report on the template based code generation for multiple interpolation levels. Finally, we report on our experience on implementing these features with multiple compilers, and the code changes required to ensure a wide compiler support. This work was partially supported by NSF ACI 1339893 and PTDC/FIS-PLA/2940/2014.

  13. Using EnergyPlus to Perform Dehumidification Analysis on Building America Homes: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Fang, X.; Winkler, J.; Christensen, D.

    2011-03-01

    A parametric study was conducted using EnergyPlus version 6.0 to investigate humidity issues on a typical mid-1990s reference home, a 2006 International Energy Conservation Code home, and a high-performance home in a hot-humid climate. The impacts of various dehumidification equipment and controls are analyzed on the high performance home. The study examined the combined effects of infiltration and mechanical ventilation with balanced and unbalanced mechanical ventilation systems. Indoor relative humidity excursions were examined; specifically, the number of excursions, average excursion length, and maximum excursion length. Space relative humidity, thermal comfort, and whole-house source energy consumption were analyzed for indoor relative humidity set points of 50%, 55%, and 60%. The study showed and explained why similar trends of high humidity were observed in all three homes regardless of energy efficiency, and why humidity problems are not necessarily unique in high-performance homes. Thermal comfort analysis indicated that occupants are unlikely to notice indoor humidity problems. The study confirmed that supplemental dehumidification should be provided to maintain space relative humidity below 60% in a hot-humid climate.

  14. Modeling of Uncertainties in Major Drivers in U.S. Electricity Markets: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Short, W.; Ferguson, T.; Leifman, M.

    2006-09-01

    This paper presents information on the Stochastic Energy Deployment System (SEDS) model. DOE and NREL are developing this new model, intended to address many of the shortcomings of the current suite of energy models. Once fully built, the salient qualities of SEDS will include full probabilistic treatment of the major uncertainties in national energy forecasts; code compactness for desktop application; user-friendly interface for a reasonably trained analyst; run-time within limits acceptable for quick-response analysis; choice of detailed or aggregate representations; and transparency of design, code, and assumptions. Moreover, SEDS development will be increasingly collaborative, as DOE and NREL will be coordinating with multiple national laboratories and other institutions, making SEDS nearly an 'open source' project. The collaboration will utilize the best expertise on specific sectors and problems, and also allow constant examination and review of the model. This paper outlines the rationale for this project and a description of its alpha version, as well as some example results. It also describes some of the expected development efforts in SEDS.

  15. Gradient-Based Optimization of Wind Farms with Different Turbine Heights: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Stanley, Andrew P. J.; Thomas, Jared; Ning, Andrew; Annoni, Jennifer; Dykes, Katherine; Fleming, Paul

    2017-05-08

    Turbine wakes reduce power production in a wind farm. Current wind farms are generally built with turbines that are all the same height, but if wind farms included turbines with different tower heights, the cost of energy (COE) may be reduced. We used gradient-based optimization to demonstrate a method to optimize wind farms with varied hub heights. Our study includes a modified version of the FLORIS wake model that accommodates three-dimensional wakes integrated with a tower structural model. Our purpose was to design a process to minimize the COE of a wind farm through layout optimization and varying turbine hub heights. Results indicate that when a farm is optimized for layout and height with two separate height groups, COE can be lowered by as much as 5%-9%, compared to a similar layout and height optimization where all the towers are the same. The COE has the best improvement in farms with high turbine density and a low wind shear exponent.

  16. Detailed Physical Trough Model for NREL's Solar Advisor Model: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wagner, M. J.; Blair, N.; Dobos, A.

    2010-10-01

    Solar Advisor Model (SAM) is a free software package made available by the National Renewable Energy Laboratory (NREL), Sandia National Laboratory, and the US Department of Energy. SAM contains hourly system performance and economic models for concentrating solar power (CSP) systems, photovoltaic, solar hot-water, and generic fuel-use technologies. Versions of SAM prior to 2010 included only the parabolic trough model based on Excelergy. This model uses top-level empirical performance curves to characterize plant behavior, and thus is limited in predictive capability for new technologies or component configurations. To address this and other functionality challenges, a new trough model; derived from physical first principles was commissioned to supplement the Excelergy-based empirical model. This new 'physical model' approaches the task of characterizing the performance of the whole parabolic trough plant by replacing empirical curve-fit relationships with more detailed calculations where practical. The resulting model matches the annual performance of the SAM empirical model (which has been previously verified with plant data) while maintaining run-times compatible with parametric analysis, adding additional flexibility in modeled system configurations, and providing more detailed performance calculations in the solar field, power block, piping, and storage subsystems.

  17. Influence of the Electron Seed Properties on the Discharge Characteristics of a Pseudospark (Preprint)

    Science.gov (United States)

    2007-11-04

    referred to as the backlighted- thyratron (BLT). Experiments have shown that the number 8 of seed electrons needed to initiate a discharge is of the...followed by rapid ionization avalanche and electron beam formation, and finally a super-emissive state. The physical model for the latter phase (also...called “super-dense glow”) is not yet well understood, albeit likely to involve a self-sustained sputtering 16, and is not being modeled here; our

  18. Insulation Coordination and Failure Mitigation Concerns for Roust Dc Electrical Power Systems (Preprint)

    Science.gov (United States)

    2014-05-01

    because of its inclusion of a reasonable range of altitudes. For design of printed circuit boards, IPC - 2221A was also considered important because...Technology Equipment – Safety – Part 1: General Requirements, second edition, 2007. [6] IPC -9592, Performance Parameters for Power Conversion Devices...Final Draft, April 2007. [7] IPC -2221A, Generic Standard on Printed Board Design, IPC - Association Connecting Electronics Industries, May 2003. [8

  19. WMO Marine Final Reports

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Final reports of the World Meteorological Organization (WMO) Commission for Marine Meteorology, Commission for Synoptic Meteorology, and Commission for Basic...

  20. Transacsys PLC - Final Results

    CERN Multimedia

    2002-01-01

    Final results from Transacsys PLC. A subsidary of this company was set up to develop the CERN EDH system into a commercial product but incurred too much financial loss so the project was cancelled (1/2 page).

  1. Aurora final report

    Energy Technology Data Exchange (ETDEWEB)

    Robert, Dross; Amedeo, Conti

    2013-12-06

    Final Technical report detailing the work done by Nuvera and its partners to fulfill the goals of the program "Transport Studies Enabling Efficiency Optimization of Cost-Competitive Fuel Cell Stacks" (a.k.a. AURORA)

  2. Final focus test beam

    Energy Technology Data Exchange (ETDEWEB)

    1991-03-01

    This report discusses the following: the Final Focus Test Beam Project; optical design; magnets; instrumentation; magnetic measurement and BPM calibration; mechanical alignment and stabilization; vacuum system; power supplies; control system; radiation shielding and personnel protection; infrastructure; and administration.

  3. CLIC Final Focus Studies

    CERN Document Server

    Tomás, R; Schulte, Daniel; Zimmermann, Frank

    2006-01-01

    The CLIC final focus system has been designed based on the local compensation scheme proposed by P. Raimondi and A. Seryi. However, there exist important chromatic aberrations that deteriorate the performance of the system. This paper studies the optimization of the final focus based on the computation of the higher orders of the map using MAD-X and PTC. The use of octupole tail folding to reduce the size of the halo in the locations with aperture limitations is also discussed.

  4. Data breaches. Final rule.

    Science.gov (United States)

    2008-04-11

    This document adopts, without change, the interim final rule that was published in the Federal Register on June 22, 2007, addressing data breaches of sensitive personal information that is processed or maintained by the Department of Veterans Affairs (VA). This final rule implements certain provisions of the Veterans Benefits, Health Care, and Information Technology Act of 2006. The regulations prescribe the mechanisms for taking action in response to a data breach of sensitive personal information.

  5. Danish Translation and Cultural Adaption of the 9-Item Shared Decision Making Questionnaire (SDM-Q-9) patient version

    DEFF Research Database (Denmark)

    Hulbæk, Mette; Jørgensen, Marianne Johansson; Primdahl, Jette

    2017-01-01

    to the context of Danish women with pelvic organ prolapse and patients with cruciate ligament injuries in the Outpatient Gynecology Clinic and the Department of Sports Traumatology. A brief description of methods In accordance with and acceptance of the German authors the original SDM-Q-9, patient version....... Minor changes to the first Danish draft was made based on results from a cognitive pretest among six women with pelvic organ prolapse and five patients with knee injuries recruited from the outpatient clinics. The final Danish version was approved by the German author. Conclusion A Danish translated...

  6. Simpevarp - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

  7. Psychometric properties of the Norwegian version of the Dysfunctional Attitude Scale (Form A).

    Science.gov (United States)

    Chioqueta, Andrea P; Stiles, Tore C

    2004-01-01

    The present study reports the reliability and validity of the Norwegian version of the Dysfunctional Attitude Scale in non-clinical and clinical populations. The participants were 344 young male military recruits, 41 healthy controls and 142 psychiatric outpatients. All the participants completed the Dysfunctional Attitude Scale, the Beck Depression Inventory and the Automatic Thoughts Questionnaire. The analysis of the Dysfunctional Attitude Scale revealed a Cronbach's alpha of 0.85, indicating satisfactory reliability. Evidence for the construct validity was obtained by the correlation between the Dysfunctional Attitude Scale and the Beck Depression Inventory (r = 0.47) and the Dysfunctional Attitude Scale and the Automatic Thoughts Questionnaire (r = 0.47). Finally, the Dysfunctional Attitude Scale significantly discriminated between clinically depressed, non-depressed psychiatric patients and healthy controls. The results showed that the Norwegian version of the Dysfunctional Attitude Scale possess satisfactory psychometric properties suggesting that this instrument is appropriate for use as a cognitive measure in a Norwegian cultural context.

  8. Verification of RESRAD-RDD. (Version 2.01)

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Jing-Jy [Argonne National Lab. (ANL), Argonne, IL (United States); Flood, Paul E. [Argonne National Lab. (ANL), Argonne, IL (United States); LePoire, David [Argonne National Lab. (ANL), Argonne, IL (United States); Kamboj, Sunita [Argonne National Lab. (ANL), Argonne, IL (United States); Yu, Charley [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-09-01

    In this report, the results generated by RESRAD-RDD version 2.01 are compared with those produced by RESRAD-RDD version 1.7 for different scenarios with different sets of input parameters. RESRAD-RDD version 1.7 is spreadsheet-driven, performing calculations with Microsoft Excel spreadsheets. RESRAD-RDD version 2.01 revamped version 1.7 by using command-driven programs designed with Visual Basic.NET to direct calculations with data saved in Microsoft Access database, and re-facing the graphical user interface (GUI) to provide more flexibility and choices in guideline derivation. Because version 1.7 and version 2.01 perform the same calculations, the comparison of their results serves as verification of both versions. The verification covered calculation results for 11 radionuclides included in both versions: Am-241, Cf-252, Cm-244, Co-60, Cs-137, Ir-192, Po-210, Pu-238, Pu-239, Ra-226, and Sr-90. At first, all nuclidespecific data used in both versions were compared to ensure that they are identical. Then generic operational guidelines and measurement-based radiation doses or stay times associated with a specific operational guideline group were calculated with both versions using different sets of input parameters, and the results obtained with the same set of input parameters were compared. A total of 12 sets of input parameters were used for the verification, and the comparison was performed for each operational guideline group, from A to G, sequentially. The verification shows that RESRAD-RDD version 1.7 and RESRAD-RDD version 2.01 generate almost identical results; the slight differences could be attributed to differences in numerical precision with Microsoft Excel and Visual Basic.NET. RESRAD-RDD version 2.01 allows the selection of different units for use in reporting calculation results. The results of SI units were obtained and compared with the base results (in traditional units) used for comparison with version 1.7. The comparison shows that RESRAD

  9. An Introduction to Version Control Using GitHub Desktop

    OpenAIRE

    Daniel van Strien

    2016-01-01

    In this lesson you will be introduced to the basics of version control, understand why it is useful and implement basic version control for a plain text document using GitHub Desktop. By the end of this lesson you should understand: * what version control is and why it can be useful * the differences between Git and GitHub * how to implement version control using ‘GitHub Desktop,’ a Graphical User Interface for GitHub * be aware of other resources that will help you imple...

  10. Low-Altitude Airbursts and the Impact Threat - Final LDRD Report.

    Energy Technology Data Exchange (ETDEWEB)

    Boslough, Mark B.; Crawford, David A.

    2007-12-01

    The purpose of this nine-week project was to advance the understanding of low-altitude airbursts by developing the means to model them at extremely high resolution in order to span the scales of entry physics as well as blast wave and plume formation. Small asteroid impacts on Earth are a recognized hazard, but the full nature of the threat is still not well understood. We used shock physics codes to discover emergent phenomena associated with low-altitude airbursts such as the Siberian Tunguska event of 1908 and the Egyptian glass-forming event 29 million years ago. The planetary defense community is beginning to recognize the significant threat from such airbursts. Low-altitude airbursts are the only class of impacts that have a significant probability of occurring within a planning time horizon. There is roughly a 10% chance of a megaton-scale low-altitude airburst event in the next decade.The first part of this LDRD final project report is a preprint of our proceedings paper associated with the plenary presentation at the Hypervelocity Impact Society 2007 Symposium in Williamsburg, Virginia (International Journal of Impact Engineering, in press). The paper summarizes discoveries associated with a series of 2D axially-symmetric CTH simulations. The second part of the report contains slides from an invited presentation at the American Geophysical Union Fall 2007 meeting in San Francisco. The presentation summarizes the results of a series of 3D oblique impact simulations of the 1908 Tunguska explosion. Because of the brevity of this late-start project, the 3D results have not yet been written up for a peer-reviewed publication. We anticipate the opportunity to eventually run simulations that include the actual topography at Tunguska, at which time these results will be published.3

  11. SPAM- SPECTRAL ANALYSIS MANAGER (UNIX VERSION)

    Science.gov (United States)

    Solomon, J. E.

    1994-01-01

    machine environments. There is a DEC VAX/VMS version with a central memory requirement of approximately 242K of 8 bit bytes and a machine independent UNIX 4.2 version. The display device currently supported is the Raster Technologies display processor. Other 512 x 512 resolution color display devices, such as De Anza, may be added with minor code modifications. This program was developed in 1986.

  12. Comparison of the Accuracy and Speed of Transient Mobile A/C System Simulation Models: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Kiss, T.; Lustbader, J.

    2014-03-01

    The operation of air conditioning (A/C) systems is a significant contributor to the total amount of fuel used by light- and heavy-duty vehicles. Therefore, continued improvement of the efficiency of these mobile A/C systems is important. Numerical simulation has been used to reduce the system development time and to improve the electronic controls, but numerical models that include highly detailed physics run slower than desired for carrying out vehicle-focused drive cycle-based system optimization. Therefore, faster models are needed even if some accuracy is sacrificed. In this study, a validated model with highly detailed physics, the 'Fully-Detailed' model, and two models with different levels of simplification, the 'Quasi-Transient' and the 'Mapped- Component' models, are compared. The Quasi-Transient model applies some simplifications compared to the Fully-Detailed model to allow faster model execution speeds. The Mapped-Component model is similar to the Quasi-Transient model except instead of detailed flow and heat transfer calculations in the heat exchangers, it uses lookup tables created with the Quasi-Transient model. All three models are set up to represent the same physical A/C system and the same electronic controls. Speed and results of the three model versions are compared for steady state and transient operation. Steady state simulated data are also compared to measured data. The results show that the Quasi-Transient and Mapped-Component models ran much faster than the Fully-Detailed model, on the order of 10- and 100-fold, respectively. They also adequately approach the results of the Fully-Detailed model for steady-state operation, and for drive cycle-based efficiency predictions

  13. Planetary Load Sharing in Three-Point- Mounted Wind Turbine Gearboxes: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Yi [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Keller, Jonathan A [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-15

    Wind turbine gearboxes do not achieve their expected design life. The cost of gearbox replacements and rebuilds and the downtime associated with these failures increase the cost of wind energy. In 2007, the U.S. Department of Energy established the National Renewable Energy Laboratory (NREL) Gearbox Reliability Collaborative (GRC). Its goals are to understand the root causes of premature gearbox failures and improve their reliability. To date, the GRC has focused on a 750-kW drivetrain with a three-stage, three-point-mounted gearbox. A nonproprietary version of the gearbox containing CRBs with C3 clearances in the planetary stage was customized. Two of these gearboxes, GB1 and GB2, were manufactured and then tested in the National Wind Technology Center's 2.5-MW dynamometer and in the field. Major GRC findings include the detrimental effect of rotor moments on planetary load sharing and predicted fatigue, and the risk of bearing sliding in low-torque conditions for three-point configuration drivetrains. Based on the knowledge gained from testing and analysis of the original design, the GRC gearbox was redesigned to improve its load-sharing characteristics and predicted fatigue. This new gearbox is named GB3. As shown in Figure 1, its key improvement is the incorporation of preloaded TRBs that support the planet carrier and planets. Roller loads can be optimized and bearing life maximized with a small preload [4]. These preloaded bearings, along with interference-fitted planet pins, improve alignments and load-sharing characteristics. A semi-integrated planet bearing design also increases capacity and eliminates outer race fretting. Romax Technology, with Powertrain Engineers and the Timken Company (Timken), completed the redesign. Timken manufactured and instrumented the planet gears and bearings. Brad Foote Gearing manufactured the other gearing and assembled the gearbox.

  14. Cassini's Grand Finale

    Science.gov (United States)

    Spilker, L. J.; Edgington, S. G.; Altobelli, N.

    2016-12-01

    After more than 12 years in Saturn orbit, the Cassini-Huygens mission has entered its final year of data collection. Cassini will return its final bits of unique data on 15 September 2017 as it plunges into Saturn's atmosphere, vaporizing and satisfying planetary protection requirements. Since early 2016 Cassini's orbital inclination was slowly increased towards its final inclination. In November Cassini transitioned to a series of 20 orbits with peripases just outside Saturn's F ring that include some of the closest flybys of the tiny ring moons and excellent views of the F ring and outer A ring. Cassini's final close flyby of Titan will propel it across Saturn's main rings and into its final orbits. Cassini's Grand Finale begins in April 2017 and is comprised of 22 orbits at an inclination of 63 degrees. Cassini will repeatedly dive between the innermost ring and Saturn's upper atmosphere providing insights into fundamental questions unattainable during the rest of the mission. It will be the first spacecraft to explore this region. These close orbits provide the highest resolution observations of both the rings and Saturn, and direct in situ sampling of the ring particles' composition, plasma, Saturn's exosphere and the innermost radiation belts. Saturn's gravitational field will be measured to unprecedented accuracy, providing information on Saturn's interior structure and mass distribution in the rings. Probing the magnetic field will give insight into the nature of the magnetic dynamo and the true rotation rate of Saturn's interior. The ion and neutral mass spectrometer will sniff the exosphere and upper atmosphere and examine water-based molecules originating from the rings. The cosmic dust analyzer will sample particle composition from different parts of the main rings. Recent science highlights and science objectives from Cassini's final orbits will be discussed. This work was carried out in part at the Jet Propulsion Laboratory, California Institute of

  15. Development and validation of a Greek language version of the Manchester Foot Pain and Disability Index

    Directory of Open Access Journals (Sweden)

    Menz Hylton B

    2008-06-01

    Full Text Available Abstract Background The Manchester Foot Pain and Disability Index (MFPDI is a 19 item questionnaire used to assess the severity and impact of foot pain. The aim of this study was to develop a Greek-language version of the MFPDI and to assess the instrument's psychometric properties. Methods The MFPDI was translated into Greek by three bilingual content experts and two bilingual language experts, and then back-translated into English to assess for equivalence. The final Greek version was administered, along with a questionnaire consisting medical history and the Medical Outcomes Study Short Form 36 (SF-36, to 104 Greek-speaking, community-dwelling people (64 female, 40 male, aged between 64 and 90 years (mean 73.00, SD 5.26 with disabling foot pain. Results The Greek translation of the MFPDI was found to have high internal consistency (Cronbach's α= 0.89, and item-total correlation coefficients from 0.33 to 0.72. Principal components analysis revealed a four-factor structure representing the constructs of functional limitation, pain intensity, concern with appearance and activity restriction, which explained 60.8% of the variance, with 38.9% of the variance explained by the first construct (functional limitation. Six items demonstrated different factor loadings to the original English version. Conclusion The Greek-language version of the MFPDI appears to be a valid tool in assessing foot pain in Greek-speaking older people. The total MFPDI scores are comparable between the Greek and English version, however due to differences in the factor loadings of some items, between-language comparisons of MFPDI should be undertaken with some caution.

  16. Improved Determination of Surface and Atmospheric Temperatures Using Only Shortwave AIRS Channels: The AIRS Version 6 Retrieval Algorithm

    Science.gov (United States)

    Susskind, Joel; Blaisdell, John; Iredell, Lena

    2010-01-01

    AIRS was launched on EOS Aqua on May 4, 2002 together with ASMU-A and HSB to form a next generation polar orbiting infrared and microwave atmosphere sounding system (Pagano et al 2003). The theoretical approach used to analyze AIRS/AMSU/HSB data in the presence of clouds in the AIRS Science Team Version 3 at-launch algorithm, and that used in the Version 4 post-launch algorithm, have been published previously. Significant theoretical and practical improvements have been made in the analysis of AIRS/AMSU data since the Version 4 algorithm. Most of these have already been incorporated in the AIRS Science Team Version 5 algorithm (Susskind et al 2010), now being used operationally at the Goddard DISC. The AIRS Version 5 retrieval algorithm contains three significant improvements over Version 4. Improved physics in Version 5 allowed for use of AIRS clear column radiances (R(sub i)) in the entire 4.3 micron CO2 absorption band in the retrieval of temperature profiles T(p) during both day and night. Tropospheric sounding 15 micron CO2 observations were used primarily in the generation of clear column radiances (R(sub i)) for all channels. This new approach allowed for the generation of accurate Quality Controlled values of R(sub i) and T(p) under more stressing cloud conditions. Secondly, Version 5 contained a new methodology to provide accurate case-by-case error estimates for retrieved geophysical parameters and for channel-by-channel clear column radiances. Thresholds of these error estimates are used in a new approach for Quality Control. Finally, Version 5 contained for the first time an approach to provide AIRS soundings in partially cloudy conditions that does not require use of any microwave data. This new AIRS Only sounding methodology was developed as a backup to AIRS Version 5 should the AMSU-A instrument fail. Susskind et al 2010 shows that Version 5 AIRS Only sounding are only slightly degraded from the AIRS/AMSU soundings, even at large fractional cloud

  17. Forsmark - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  18. dfnWorks, Version 2.0

    Energy Technology Data Exchange (ETDEWEB)

    2017-01-19

    DFNWorks is a suite of software for generating and solving flow and transport physics on a Discrete Fracture Network (DFN). The suite is composed of three components: DFNGen: Stochastic fracture generation, mesh generation, model setup DFNFlow: Flow solution using PFLOTRAN or FEHM control volume formulation solver DFNTrans: Particle tracking transport DFNGen Algorithm Description: This is a workflow that uses C++ software version for fracture generation, Python scripts written by the authors and the LaGriT software to generate computational mesh. DFNFlow The solution of flow in porous media is accomplished by coupling DFNGen output with the existing software packages FEHM and PFLOTRAN. The DFNWorks workflow involves modules and scripts that translate DFNGen output to formats compatible with FEHM and PFLOTRAN input. FEHM LA-CC-2012-083 PFLOTRAN LA-CC-09-047 LaGriT LA-CC-07-38 DFNTrans Stand-alone particle tracking algorithm that takes FEHM/PFLOTRAN flow solution as output and computes velocity field and advects particles.

  19. Version 1 of the Hubble Source Catalog

    CERN Document Server

    Whitmore, Bradley C; Budavari, Tamas; Casertano, Stefano; Downes, Ronald A; Donaldson, Thomas; Fall, S Michael; Lubow, Stephen H; Quick, Lee; Strolger, Louis-Gregory; Wallace, Geoff; White, Richard L

    2016-01-01

    The Hubble Source Catalog is designed to help optimize science from the Hubble Space Telescope by combining the tens of thousands of visit-based source lists in the Hubble Legacy Archive into a single master catalog. Version 1 of the Hubble Source Catalog includes WFPC2, ACS/WFC, WFC3/UVIS, and WFC3/IR photometric data generated using SExtractor software to produce the individual source lists. The catalog includes roughly 80 million detections of 30 million objects involving 112 different detector/filter combinations, and about 160 thousand HST exposures. Source lists from Data Release 8 of the Hubble Legacy Archive are matched using an algorithm developed by Budavari & Lubow (2012). The mean photometric accuracy for the catalog as a whole is better than 0.10 mag, with relative accuracy as good as 0.02 mag in certain circumstances (e.g., bright isolated stars). The relative astrometric residuals are typically within 10 mas, with a value for the mode (i.e., most common value) of 2.3 mas. The absolute astro...

  20. The Conformal Version of Black Hole Thermodynamics

    CERN Document Server

    Wu, S Q

    2004-01-01

    The conformal thermodynamics of rotating charged black holes in general relativity and string theory is proposed by considering the first laws of thermodynamics for a pair of systems made up of the two horizons of a Kerr-Newman or Kerr-Sen black hole. These two systems are constructed by only demanding their ``horizon areas'' to be the sum and difference of that of the outer and inner horizons of their prototype. The thermodynamics present here is a ``conformal version'' of black hole thermodynamics, since it is closely related to the near-horizon conformal symmetry of black holes. The concept of non-quasinormal modes recently proposed by D. Birmingham and S. Carlip [7] is compatible with this ``conformal thermodynamics'', rather than the usual ``horizon thermodynamics''. In addition, we show that this conformal thermodynamics resembles to the thermodynamics of effective string or D-brane models, since the two newly-constructed systems bear a striking resemblance to the right- and left-movers in string theory...

  1. Curiosity rover LEGO® version could land soon

    Science.gov (United States)

    Showstack, Randy

    2012-09-01

    Now that NASA's Curiosity rover has landed on Mars, a smaller LEGO® plastic brick construction version could be landing in toy stores. Less than 2 weeks after Curiosity set down on 5 August, a LEGO® set concept model designed by a mechanical and aerospace engineer who worked on the real rover garnered its 10,000th supporter on the Web site of CUUSOO, a Japanese partner of the LEGO® group. That milestone triggered a company review that began in September 2012 to test the model's “playability, safety, and ft with the LEGO® brand,” according to a congratulatory statement from the company to designer Stephen Pakbaz. Pakbaz told Eos that he has been an avid LEGO® and space exploration fan for most of his life. “For me, creating a LEGO® model of Curiosity using my firsthand knowledge of the rover was inevitable. What I enjoyed most was being able to faithfully replicate and subsequently demonstrate the rocker-bogie suspension system to friends, family, and coworkers,” he noted, referring to the suspension system that allows the rover to climb over obstacles while keeping its wheels on the ground. Pakbaz, who is currently with Orbital Sciences Corporation, was involved with aspects of the rover while working at the Jet Propulsion Laboratory from 2007 to 2011 as a mechanical engineer.

  2. Final Report of the Simulation Optimization Task Force

    CERN Document Server

    Rimoldi, A; Dell'Acqua, A; Froidevaux, D; Gianotti, F; Guyot, C; Hinchliffe, I; Jakobs, K; Marshall, Z; Nisati, A; Quarrie, D; Unal, G; Young, C

    2009-01-01

    This is the final report of the ATLAS Simulation Optimization Task Force, established in June of 2007. This note justifies the selected Geant4 version, physics list, and range cuts to be used by the default ATLAS simulation for initial data taking and beyond. The current status of several projects, including detector description, simulation validation, studies of additional Geant4 parameters, and cavern background, are reported.

  3. Nonlinear Legendre Spectral Finite Elements for Wind Turbine Blade Dynamics: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Q.; Sprague, M. A.; Jonkman, J.; Johnson, N.

    2014-01-01

    This paper presents a numerical implementation and examination of new wind turbine blade finite element model based on Geometrically Exact Beam Theory (GEBT) and a high-order spectral finite element method. The displacement-based GEBT is presented, which includes the coupling effects that exist in composite structures and geometric nonlinearity. Legendre spectral finite elements (LSFEs) are high-order finite elements with nodes located at the Gauss-Legendre-Lobatto points. LSFEs can be an order of magnitude more efficient that low-order finite elements for a given accuracy level. Interpolation of the three-dimensional rotation, a major technical barrier in large-deformation simulation, is discussed in the context of LSFEs. It is shown, by numerical example, that the high-order LSFEs, where weak forms are evaluated with nodal quadrature, do not suffer from a drawback that exists in low-order finite elements where the tangent-stiffness matrix is calculated at the Gauss points. Finally, the new LSFE code is implemented in the new FAST Modularization Framework for dynamic simulation of highly flexible composite-material wind turbine blades. The framework allows for fully interactive simulations of turbine blades in operating conditions. Numerical examples showing validation and LSFE performance will be provided in the final paper.

  4. Validation of the National Solar Radiation Database (NSRDB) (2005-2012): Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Sengupta, Manajit; Weekley, Andrew; Habte, Aron; Lopez, Anthony; Molling, Christine

    2015-09-15

    PWV, temperature, and pressure data are also combined with the MMAC model to simulate solar radiation under clear-sky conditions. The current NSRDB update is based on a 4-km x 4-km resolution at a 30-minute time interval, which has a higher temporal and spatial resolution. This paper demonstrates the evaluation of the data set using ground-measured data and detailed evaluation statistics. The result of the comparison shows a good correlation to the NSRDB data set. Further, an outline of the new version of the NSRDB and future plans for enhancement and improvement are provided.

  5. Performing the processing required for automatically get a PDF/A version of the CERN Library documentation

    CERN Document Server

    Molina Garcia-Retamero, Antonio

    2015-01-01

    The aim of the project was to perform the processing required for automatically get a PDF/A version of the CERN Library documentation. For this, it is necessary to extract as much metadata as possible from the sources files, inject the required data into the original source files creating new ones ready for being compiled with all related dependencies. Besides, I’ve proposed the creation of a HTML version consistent with the PDF and navigable for easy access, I’ve been trying to perform some Natural Language Processing for extracting metadata, I’ve proposed the injection of the cern library documentation into the HTML version of the long writeups where it is referenced (for instance, when a CERN Library function is referenced in a sample code) Finally, I’ve designed and implemented a Graphical User Interface in order to simplify the process for the user.

  6. Translation and cross-cultural adaptation of the Brazilian Portuguese version of the Driving Behavior Survey (DBS

    Directory of Open Access Journals (Sweden)

    Jessye Almeida Cantini

    2013-12-01

    Full Text Available BACKGROUND: Fear of driving has been recognized as a complex diagnostic entity. For this reason, the use of psychometric instruments is fundamental to advancing research in this area. Psychometric instruments are also necessary for clinical care, as they can help conceptualize the disorder and plan adequate treatment. OBJECTIVE: To describe the cross-cultural adaptation of a Brazilian version of the Driving Behavior Survey (DBS. Methods: The process consisted of: 1 two translations and back-translations carried out by independent evaluators; 2 development of a brief version by four bilingual experts in mental health; 3 experimental application; and 4 investigation of operational equivalence. RESULTS: The adaptation process is described and a final Brazilian version of the DBS is presented. CONCLUSION: A new instrument is now available to assess the driving behaviors of the Brazilian population, facilitating research in this field.

  7. Meson Properties in a renormalizable version of the NJL model

    CERN Document Server

    Mota, A L; Hiller, B; Walliser, H; Mota, Andre L.; Hiller, Brigitte; Walliser, Hans

    1999-01-01

    In the present paper we implement a non-trivial and renormalizable extension of the NJL model. We discuss the advantages and shortcomings of this extended model compared to a usual effective Pauli-Villars regularized version. We show that both versions become equivalent in the case of a large cutoff. Various relevant mesonic observables are calculated and compared.

  8. Changes of ocular version with aging in normal Korean population.

    Science.gov (United States)

    Kang, Nam-Yeo

    2009-08-01

    The purpose of this study is to estimate normative values of maximum versions in healthy Koreans and investigate age-associated changes in eye movement, using lateral and vertical version light-reflex (LVR) test. Two hundred forty normal healthy subjects whose corrected visual acuity was better than 20/50 in both eyes, from 4 to 79 yr old (30 subjects in each decade) were studied. Maximum sustained values of dextroversion, levoversion, supraversion, and infraversion in each eye were measured using LVR test. Changes of versions according to age were analyzed. Mean normal value of dextroversion, levoversion, supraversion, and infraversion in normal Koreans was 7.7 mm, 41.6 degrees, 33.9 degrees, and 7.7 mm respectively. Contrary to values of Caucasians, levoversion (adductive movement) was more excessive and infraversion (depression) was smaller in Koreans. All versions were decreased with aging (Paging compared with other versions (Page than levoversion (Paging but the ranges of ocular movements in Koreans were different with Caucasians as version least affected and most affected by age was infraversion and levoversion in Koreans. The study standardized normal maximal versions and aging changes of versions in Koreans.

  9. Development of the Gerotranscendence Scale Type 2: Japanese Version

    Science.gov (United States)

    Hoshino, Kazumi; Zarit, Steven H.; Nakayama, Makoto

    2012-01-01

    This study developed the Japanese version of the Gerotranscendence Scale Type 2 (the GST2) and examined reliability and validity of the scale. In Japan, 525 community-dwelling older adults (Male = 260, Female = 265) answered a questionnaire. An exploratory factor analysis of the Japanese version of the GST2 revealed the same three-factor structure…

  10. Validation of a Portuguese Version of the Children's Hope Scale

    Science.gov (United States)

    Marques, Susana C.; Pais-Ribeiro, J. L.; Lopez, Shane J.

    2009-01-01

    The article describes the development of the Portuguese version of the Children's Hope Scale and the examination of its psychometric properties. A sample of 367 Portuguese students completed the Portuguese-language versions of the Children's Hope Scale (CHS; Snyder et al., 1997), Students' Life Satisfaction Scale (SLSS; Huebner, 1991), Global…

  11. Trace contaminant control simulation computer program, version 8.1

    Science.gov (United States)

    Perry, J. L.

    1994-01-01

    The Trace Contaminant Control Simulation computer program is a tool for assessing the performance of various process technologies for removing trace chemical contamination from a spacecraft cabin atmosphere. Included in the simulation are chemical and physical adsorption by activated charcoal, chemical adsorption by lithium hydroxide, absorption by humidity condensate, and low- and high-temperature catalytic oxidation. Means are provided for simulating regenerable as well as nonregenerable systems. The program provides an overall mass balance of chemical contaminants in a spacecraft cabin given specified generation rates. Removal rates are based on device flow rates specified by the user and calculated removal efficiencies based on cabin concentration and removal technology experimental data. Versions 1.0 through 8.0 are documented in NASA TM-108409. TM-108409 also contains a source file listing for version 8.0. Changes to version 8.0 are documented in this technical memorandum and a source file listing for the modified version, version 8.1, is provided. Detailed descriptions for the computer program subprograms are extracted from TM-108409 and modified as necessary to reflect version 8.1. Version 8.1 supersedes version 8.0. Information on a separate user's guide is available from the author.

  12. The Gaia Framework: Version Support In Web Based Open Hypermedia

    DEFF Research Database (Denmark)

    Kejser, Thomas; Grønbæk, Kaj

    2003-01-01

    The GAIA framework prototype, described herein, explores the possibilities and problems that arise when combining versioning and open hypermedia paradigms. It will be argued that it - by adding versioning as a separate service in the hypermedia architecture - is possible to build consistent versi...

  13. Evaluation of Psychometric Properties of the Malay Version ...

    African Journals Online (AJOL)

    The 10-item version of Perceived Stress Scale (PSS-10) is ... [1-6]. There is a need to investigate the psychometric properties of the Malay version of ... 2015, IP: 41.135.175.131] || Click here to download free Android application for this journal ...

  14. GEM Building Taxonomy (Version 2.0)

    Science.gov (United States)

    Brzev, S.; Scawthorn, C.; Charleson, A.W.; Allen, L.; Greene, M.; Jaiswal, Kishor; Silva, V.

    2013-01-01

    This report documents the development and applications of the Building Taxonomy for the Global Earthquake Model (GEM). The purpose of the GEM Building Taxonomy is to describe and classify buildings in a uniform manner as a key step towards assessing their seismic risk, Criteria for development of the GEM Building Taxonomy were that the Taxonomy be relevant to seismic performance of different construction types; be comprehensive yet simple; be collapsible; adhere to principles that are familiar to the range of users; and ultimately be extensible to non-buildings and other hazards. The taxonomy was developed in conjunction with other GEM researchers and builds on the knowledge base from other taxonomies, including the EERI and IAEE World Housing Encyclopedia, PAGER-STR, and HAZUS. The taxonomy is organized as a series of expandable tables, which contain information pertaining to various building attributes. Each attribute describes a specific characteristic of an individual building or a class of buildings that could potentially affect their seismic performance. The following 13 attributes have been included in the GEM Building Taxonomy Version 2.0 (v2.0): 1.) direction, 2.)material of the lateral load-resisting system, 3.) lateral load-resisting system, 4.) height, 5.) date of construction of retrofit, 6.) occupancy, 7.) building position within a block, 8.) shape of the building plan, 9.) structural irregularity, 10.) exterior walls, 11.) roof, 12.) floor, 13.) foundation system. The report illustrates the pratical use of the GEM Building Taxonomy by discussing example case studies, in which the building-specific characteristics are mapped directly using GEM taxonomic attributes and the corresponding taxonomic string is constructed for that building, with "/" slash marks separating attributes. For example, for the building shown to the right, the GEM Taxonomy string is: DX1/MUR+CLBRS+MOCL2/LWAL3/

  15. Space Images for NASA JPL Android Version

    Science.gov (United States)

    Nelson, Jon D.; Gutheinz, Sandy C.; Strom, Joshua R.; Arca, Jeremy M.; Perez, Martin; Boggs, Karen; Stanboli, Alice

    2013-01-01

    This software addresses the demand for easily accessible NASA JPL images and videos by providing a user friendly and simple graphical user interface that can be run via the Android platform from any location where Internet connection is available. This app is complementary to the iPhone version of the application. A backend infrastructure stores, tracks, and retrieves space images from the JPL Photojournal and Institutional Communications Web server, and catalogs the information into a streamlined rating infrastructure. This system consists of four distinguishing components: image repository, database, server-side logic, and Android mobile application. The image repository contains images from various JPL flight projects. The database stores the image information as well as the user rating. The server-side logic retrieves the image information from the database and categorizes each image for display. The Android mobile application is an interfacing delivery system that retrieves the image information from the server for each Android mobile device user. Also created is a reporting and tracking system for charting and monitoring usage. Unlike other Android mobile image applications, this system uses the latest emerging technologies to produce image listings based directly on user input. This allows for countless combinations of images returned. The backend infrastructure uses industry-standard coding and database methods, enabling future software improvement and technology updates. The flexibility of the system design framework permits multiple levels of display possibilities and provides integration capabilities. Unique features of the software include image/video retrieval from a selected set of categories, image Web links that can be shared among e-mail users, sharing to Facebook/Twitter, marking as user's favorites, and image metadata searchable for instant results.

  16. GENII Version 2 Software Design Document

    Energy Technology Data Exchange (ETDEWEB)

    Napier, Bruce A.; Strenge, Dennis L.; Ramsdell, James V.; Eslinger, Paul W.; Fosmire, Christian J.

    2004-03-08

    appropriate risk factors to the effective dose equivalent or organ dose. In addition, Version 2 uses cancer risk factors from Federal Guidance Report 13 to estimate risk to specific organs or tissues.

  17. The Warburg effect version 2.0

    Science.gov (United States)

    Menendez, Javier A.; Joven, Jorge; Cufí, Sílvia; Corominas-Faja, Bruna; Oliveras-Ferraros, Cristina; Cuyàs, Elisabet; Martin-Castillo, Begoña; López-Bonet, Eugeni; Alarcón, Tomás; Vazquez-Martin, Alejandro

    2013-01-01

    When fighting cancer, knowledge on metabolism has always been important. Today, it matters more than ever. The restricted cataloging of cancer genomes is quite unlikely to achieve the task of curing cancer, unless it is integrated into metabolic networks that respond to and influence the constantly evolving cancer stem cell (CSC) cellular states. Once the genomic era of carcinogenesis had pushed the 1920s Otto Warburg’s metabolic cancer hypothesis into obscurity for decades, the most recent studies begin to support a new developing paradigm, in which the molecular logic behind the conversion of non-CSCs into CSCs can be better understood in terms of the “metabolic facilitators” and “metabolic impediments” that operate as proximate openings and roadblocks, respectively, for the transcriptional events and signal transduction programs that ultimately orchestrate the intrinsic and/or microenvironmental paths to CSC cellular states. Here we propose that a profound understanding of how human carcinomas install a proper “Warburg effect version 2.0” allowing them to “run” the CSCs’ “software” programs should guide a new era of metabolo-genomic-personalized cancer medicine. By viewing metabolic reprogramming of CSCs as an essential characteristic that allows dynamic, multidimensional and evolving cancer populations to compete successfully for their expansion on the organism, we now argue that CSCs bioenergetics might be another cancer hallmark. A definitive understanding of metabolic reprogramming in CSCs may complement or to some extent replace, the 30-y-old paradigm of targeting oncogenes to treat human carcinomas, because it can be possible to metabolically create non-permissive or “hostile” metabotypes to prevent the occurrence of CSC cellular states with tumor- and metastasis-initiating capacity. PMID:23549172

  18. Defect-Band Emission Photoluminescence Imaging on Multi-Crystalline Si Solar Cells: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Yan, F.; Johnston, S.; Zaunbrecher, K.; Al-Jassim, M.; Sidelkheir, O.; Blosse, A.

    2011-07-01

    Defect-band photoluminescence (PL) imaging with an InGaAs camera was applied to multicrystalline silicon (mc-Si) wafers, which were taken from different heights of different Si bricks. Neighboring wafers were picked at six different processing steps, from as-cut to post-metallization. By using different cut-off filters, we were able to separate the band-to-band emission images from the defect-band emission images. On the defect-band emission images, the bright regions that originate from the grain boundaries and defect clusters were extracted from the PL images. The area fraction percentage of these regions at various processing stages shows a correlation with the final cell electrical parameters.

  19. Analyzing the Impacts of Increased Wind Power on Generation Revenue Sufficiency: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Qin; Wu, Hongyu; Tan, Jin; Hodge, Bri-Mathias; Li, Wanning; Luo, Cheng

    2016-08-01

    The Revenue Sufficiency Guarantee (RSG), as part of make-whole (or uplift) payments in electricity markets, is designed to recover the generation resources' offer-based production costs that are not otherwise covered by their market revenues. Increased penetrations of wind power will bring significant impacts to the RSG payments in the markets. However, literature related to this topic is sparse. This paper first reviews the industrial practices of implementing RSG in major U.S. independent system operators (ISOs) and regional transmission operators (RTOs) and then develops a general RSG calculation method. Finally, an 18-bus test system is adopted to demonstrate the impacts of increased wind power on RSG payments.

  20. SPLICER - A GENETIC ALGORITHM TOOL FOR SEARCH AND OPTIMIZATION, VERSION 1.0 (MACINTOSH VERSION)

    Science.gov (United States)

    Wang, L.

    1994-01-01

    representation scheme. The SPLICER tool provides representation libraries for binary strings and for permutations. These libraries contain functions for the definition, creation, and decoding of genetic strings, as well as multiple crossover and mutation operators. Furthermore, the SPLICER tool defines the appropriate interfaces to allow users to create new representation libraries. Fitness modules are the only component of the SPLICER system a user will normally need to create or alter to solve a particular problem. Fitness functions are defined and stored in interchangeable fitness modules which must be created using C language. Within a fitness module, a user can create a fitness (or scoring) function, set the initial values for various SPLICER control parameters (e.g., population size), create a function which graphically displays the best solutions as they are found, and provide descriptive information about the problem. The tool comes with several example fitness modules, while the process of developing a fitness module is fully discussed in the accompanying documentation. The user interface is event-driven and provides graphic output in windows. SPLICER is written in Think C for Apple Macintosh computers running System 6.0.3 or later and Sun series workstations running SunOS. The UNIX version is easily ported to other UNIX platforms and requires MIT's X Window System, Version 11 Revision 4 or 5, MIT's Athena Widget Set, and the Xw Widget Set. Example executables and source code are included for each machine version. The standard distribution media for the Macintosh version is a set of three 3.5 inch Macintosh format diskettes. The standard distribution medium for the UNIX version is a .25 inch streaming magnetic tape cartridge in UNIX tar format. For the UNIX version, alternate distribution media and formats are available upon request. SPLICER was developed in 1991.

  1. SPLICER - A GENETIC ALGORITHM TOOL FOR SEARCH AND OPTIMIZATION, VERSION 1.0 (MACINTOSH VERSION)

    Science.gov (United States)

    Wang, L.

    1994-01-01

    representation scheme. The SPLICER tool provides representation libraries for binary strings and for permutations. These libraries contain functions for the definition, creation, and decoding of genetic strings, as well as multiple crossover and mutation operators. Furthermore, the SPLICER tool defines the appropriate interfaces to allow users to create new representation libraries. Fitness modules are the only component of the SPLICER system a user will normally need to create or alter to solve a particular problem. Fitness functions are defined and stored in interchangeable fitness modules which must be created using C language. Within a fitness module, a user can create a fitness (or scoring) function, set the initial values for various SPLICER control parameters (e.g., population size), create a function which graphically displays the best solutions as they are found, and provide descriptive information about the problem. The tool comes with several example fitness modules, while the process of developing a fitness module is fully discussed in the accompanying documentation. The user interface is event-driven and provides graphic output in windows. SPLICER is written in Think C for Apple Macintosh computers running System 6.0.3 or later and Sun series workstations running SunOS. The UNIX version is easily ported to other UNIX platforms and requires MIT's X Window System, Version 11 Revision 4 or 5, MIT's Athena Widget Set, and the Xw Widget Set. Example executables and source code are included for each machine version. The standard distribution media for the Macintosh version is a set of three 3.5 inch Macintosh format diskettes. The standard distribution medium for the UNIX version is a .25 inch streaming magnetic tape cartridge in UNIX tar format. For the UNIX version, alternate distribution media and formats are available upon request. SPLICER was developed in 1991.

  2. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Gilbert, Chris [Altamont Environmental, Inc.

    2014-11-13

    The project, Capital Investment to Fund Equipment Purchases and Facility Modifications to Create a Sustainable Future for EnergyXchange served to replace landfill gas energy with alternative energy resources, primarily solar and wood waste. This is the final project closeout report.

  3. CAFE Project : final report

    NARCIS (Netherlands)

    A. Weber; R. Carter; C.J. Stanford; A. Weber

    2003-01-01

    textabstract[MAS E-0302] This is the final public report of the CAFE project (ESPRIT 7023). CAFE developed a secure conditional access architecture and implemented a multi-currency electronic purse system based on smart cards and infrared wallets. The electronic purse was tested in user trials at

  4. CAFE Project : final report

    NARCIS (Netherlands)

    Weber, A.; Carter, R.; Stanford, C.J.; Weber, A.

    2003-01-01

    [MAS E-0302] This is the final public report of the CAFE project (ESPRIT 7023). CAFE developed a secure conditional access architecture and implemented a multi-currency electronic purse system based on smart cards and infrared wallets. The electronic purse was tested in user trials at the European C

  5. GCFM Users Guide Revision for Model Version 5.0

    Energy Technology Data Exchange (ETDEWEB)

    Keimig, Mark A.; Blake, Coleman

    1981-08-10

    This paper documents alterations made to the MITRE/DOE Geothermal Cash Flow Model (GCFM) in the period of September 1980 through September 1981. Version 4.0 of GCFM was installed on the computer at the DOE San Francisco Operations Office in August 1980. This Version has also been distributed to about a dozen geothermal industry firms, for examination and potential use. During late 1980 and 1981, a few errors detected in the Version 4.0 code were corrected, resulting in Version 4.1. If you are currently using GCFM Version 4.0, it is suggested that you make the changes to your code that are described in Section 2.0. User's manual changes listed in Section 3.0 and Section 4.0 should then also be made.

  6. Simpevarp - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

  7. Psychometric Properties of the Persian Version of the God Locus of Health Control (GLHC): A Study on Muslim Pilgrims.

    Science.gov (United States)

    Nabipour, Amir Reza; Nakhaee, Nouzar; Khanjani, Narges; Soltani, Maryam; Moradlou, Hossein Zirak; Soltani, Zahrasadat

    2016-12-28

    God Locus of Health Control (GHLC) scale is an instrument for assessing to what extent one believes that God controls his/her health or disease. The aim of this study was to describe the cultural adaptation of this scale and to investigate the psychometric properties of Persian version. At first, the scale was forward-translated to Persian, and then, backward-translation was conducted. Finally, the synthesized back-translated version was prepared and compared to the draft Persian-language version of the GLHC. In the next step, in order to test cognitive debriefing, the Persian-language version of the questionnaire was completed by 20 pilgrims. Final version of Persian GHLC scale was answered by 600 pilgrims attending religious holy places. Mean age of respondents was 33.15 (±11.04) years. There was a positive correlation between six items of GLHC scale and inter-item correlation coefficients. The Cronbach's alpha coefficient was 0.84. Exploratory factor analysis showed that the G LHC scale had a one-factor structure. The factor loadings for all items ranged from 0.57 to 0.77. Residual correlations of all items were between -0.2 and +0.2. The people with lower income had significantly higher score of GLHC scale. GLHC scale score had a significant positive correlation with DUREL subscale and MHLC Chance Externality subscale score. There was no a significant correlation between GLHC scale score and Multidimensional Health Locus of Control (MHLC) Internality and Powerful subscales scores. The results of the present study showed that the Persian version of GHLC scale has acceptable factorial validity and internal consistency reliability.

  8. Pythia version 7-0.0 - a proof-of-concept version

    CERN Document Server

    Bertini, M; Sjöstrand, Torbjörn; Bertini, Marc; Lonnblad, Leif; Sjostrand, Torbjorn

    2001-01-01

    This document describes the first proof-of-concept version of the Pythia7 program. Pythia7 is a complete re-write of the Pythia program in C++. It is mainly intended to be a replacement for the `Lund' family of event generators, but is also a toolkit with a structure suitable for implementing any event generator model. In this document, the structure of the program is presented both from the user and the developer point of view. It is not intended to be a complete manual, but together with the documentation provided in the distribution, it should be sufficient to start working with the program.

  9. Cross-cultural adaptation and validation of the Danish version of the 19-item return-to-work self-efficacy (RTWSE-19) questionnaire

    DEFF Research Database (Denmark)

    Hedeager Momsen, Anne-Mette; Rosbjerg, Rikke; Stapelfeldt, Christina Malmose;

    2016-01-01

    OBJECTIVES: The aim of this study was to perform a cross-cultural adaptation of the return-to-work self-efficacy (RTWSE-19) scale into Danish and test the reliability, validity and responsiveness of the final version. METHODS: The adaptation process followed standard guidelines and the pretest...... was confirmed. High baseline RTWSE-19 level was associated with being at work after ten weeks odds ratio (OR) 3.24, 95% confidence interval (95% CI) 1.48-7.07. CONCLUSIONS: The RTWSE-19 cross-cultural translation to Danish was performed satisfactorily. A modified final version was produced, and the test...

  10. Unique device identification system. Final rule.

    Science.gov (United States)

    2013-09-24

    The Food and Drug Administration (FDA) is issuing a final rule to establish a system to adequately identify devices through distribution and use. This rule requires the label of medical devices to include a unique device identifier (UDI), except where the rule provides for an exception or alternative placement. The labeler must submit product information concerning devices to FDA's Global Unique Device Identification Database (GUDID), unless subject to an exception or alternative. The system established by this rule requires the label and device package of each medical device to include a UDI and requires that each UDI be provided in a plain-text version and in a form that uses automatic identification and data capture (AIDC) technology. The UDI will be required to be directly marked on the device itself if the device is intended to be used more than once and intended to be reprocessed before each use.

  11. Assessment of radionuclide databases in CAP88 mainframe version 1.0 and Windows-based version 3.0.

    Science.gov (United States)

    LaBone, Elizabeth D; Farfán, Eduardo B; Lee, Patricia L; Jannik, G Timothy; Donnelly, Elizabeth H; Foley, Trevor Q

    2009-09-01

    In this study the radionuclide databases for two versions of the Clean Air Act Assessment Package-1988 (CAP88) computer model were assessed in detail. CAP88 estimates radiation dose and the risk of health effects to human populations from radionuclide emissions to air. This program is used by several U.S. Department of Energy (DOE) facilities to comply with National Emission Standards for Hazardous Air Pollutants regulations. CAP88 Mainframe, referred to as version 1.0 on the U.S. Environmental Protection Agency Web site (http://www.epa.gov/radiation/assessment/CAP88/), was the very first CAP88 version released in 1988. Some DOE facilities including the Savannah River Site still employ this version (1.0) while others use the more user-friendly personal computer Windows-based version 3.0 released in December 2007. Version 1.0 uses the program RADRISK based on International Commission on Radiological Protection Publication 30 as its radionuclide database. Version 3.0 uses half-life, dose, and risk factor values based on Federal Guidance Report 13. Differences in these values could cause different results for the same input exposure data (same scenario), depending on which version of CAP88 is used. Consequently, the differences between the two versions are being assessed in detail at Savannah River National Laboratory. The version 1.0 and 3.0 database files contain 496 and 838 radionuclides, respectively, and though one would expect the newer version to include all the 496 radionuclides, 35 radionuclides are listed in version 1.0 that are not included in version 3.0. The majority of these has either extremely short or long half-lives or is no longer in production; however, some of the short-lived radionuclides might produce progeny of great interest at DOE sites. In addition, 122 radionuclides were found to have different half-lives in the two versions, with 21 over 3 percent different and 12 over 10 percent different.

  12. ASSESSMENT OF RADIONUCLIDES DATABASES IN CAP88 MAINFRAME VERSION 1.0 AND WINDOWS-BASED VERSION 3.0

    Energy Technology Data Exchange (ETDEWEB)

    Farfan, E.; Lee, P.; Jannik, T.; Donnelly, E.

    2008-09-16

    In this study the radionuclide databases for two versions of the Clean Air Act Assessment Package-1988 (CAP88) computer model were assessed in detail. CAP88 estimates radiation dose and the risk of health effects to human populations from radionuclide emissions to air. This program is used by several Department of Energy (DOE) facilities to comply with National Emission Standards for Hazardous Air Pollutants (NESHAP) regulations. CAP88 Mainframe, referred to as Version 1.0 on the Environmental Protection Agency (EPA) website (http://www.epa.gov/radiation/assessment/CAP88/), was the very first CAP88 version released in 1988. Some DOE facilities including the Savannah River Site still employ this version (1.0) while others use the more user-friendly personal computer Windows-based Version 3.0 released in December 2007. Version 1.0 uses the program RADRISK based on International Commission on Radiological Protection (ICRP) Publication 30 as its radionuclide database. Version 3.0 uses half-life, dose and risk factor values based on Federal Guidance Report 13. Differences in these values could cause different results for the same input exposure data (same scenario), depending on which version of CAP88 is used. Consequently, the differences between the two versions are being assessed in detail at Savannah River National Laboratory. The version 1.0 and 3.0 database files contain 496 and 838 radionuclides, respectively, and though one would expect the newer version to include all the 496 radionuclides, thirty-five radionuclides are listed in version 1.0 that are not included in version 3.0. The majority of these has either extremely short or long half-lives or is no longer in production; however, some of the short-lived radionuclides might produce progeny of great interest at DOE sites. In addition, one hundred and twenty-two radionuclides were found to have different half-lives in the two versions, with 21 over 3 percent different and 12 over 10 percent different.

  13. Re-evaluation of Predictive Models in Light of New Data: Sunspot Number Version 2.0

    Science.gov (United States)

    Gkana, A.; Zachilas, L.

    2016-10-01

    The original version of the Zürich sunspot number (Sunspot Number Version 1.0) has been revised by an entirely new series (Sunspot Number Version 2.0). We re-evaluate the performance of our previously proposed models for predicting solar activity in the light of the revised data. We perform new monthly and yearly predictions using the Sunspot Number Version 2.0 as input data and compare them with our original predictions (using the Sunspot Number Version 1.0 series as input data). We show that our previously proposed models are still able to produce quite accurate solar-activity predictions despite the full revision of the Zürich Sunspot Number, indicating that there is no significant degradation in their performance. Extending our new monthly predictions (July 2013 - August 2015) by 50 time-steps (months) ahead in time (from September 2015 to October 2019), we provide evidence that we are heading into a period of dramatically low solar activity. Finally, our new future long-term predictions endorse our previous claim that a prolonged solar activity minimum is expected to occur, lasting up to the year ≈ 2100.

  14. Korean version of the functional assessment of cancer therapy (FACT)-vanderbilt cystectomy index (VCI): translation and linguistic.

    Science.gov (United States)

    Kim, Myong; Lee, Hahn Ey; Kim, Sung Han; Cho, Sung Yong; Jeong, Seong Jin; Oh, Seung June; Cookson, Michael S; Ku, Ja Hyeon

    2014-11-30

    To develop a Korean version of the Functional Assessment of Cancer Therapy (FACT)-Vanderbilt Cystectomy Index (VCI) from the original English version, with subsequent linguistic validation in Korean patients who underwent radical cystectomy with urinary diversion. Translation and linguistic validation were carried out between January and May of 2013, which consisted of the following stages:(1) permission for translation;(2) forward translation;(3) reconciliation;(4) backward translation;(5) cognitive debriefing and(6) final proof-reading. During the forward translation phases,word as such as "bother","spend time", "support", "coping" and "concern" were adjusted to be more comprehensible to the target population. There conciled Korean version was accepted without certain objections because the original version and the backward translation were almost congruent except for minor differences in a subset of questions. The translation was tested using 5 Korean-speaking subjects. The subjects took an average of 8.2 minutes to complete the questionnaire, without difficulty and found the questionnaire clear and easy to understand. The panel discussed each of the issues raised by subjects and most terms were judged by the panel as to not require further changes because the overall comprehension levels were relatively high and because the translated terms were accurately rendered in the target languages. This report has demonstrated that despite translation difficulties, the linguistic validation of the FACT-VCI in the Korean language was successful. The next step is to assess the psychometric properties of the Korean version of FACT-VCI.

  15. Managing EHS of PV-Related Equipment at the National Renewable Energy Laboratory: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    McCuskey, T.; Nelson, B. P.

    2012-06-01

    Managing environment, health, and safety (EHS) risks at a national laboratory, or university, can be intimidating to a researcher who is focused on research results. Laboratory research and development (R&D) operations are often driven by scientists with limited engineering support and lack well-refined equipment development resources. To add to the burden for a researcher, there is a plethora of codes, standards, and regulations that govern the safe installation and operation of photovoltaic-related R&D equipment -- especially those involving hazardous production materials. To help guide the researcher through the vast list of requirements, the EHS office at NREL has taken a variety of steps. Organizationally, the office has developed hazard-specific laboratory-level procedures to govern particular activities. These procedures are a distillation of appropriate international codes, fire agencies, SEMI standards, U.S. Department of Energy orders, and other industry standards to those necessary and sufficient to govern the safe operation of a given activity. The EHS office works proactively with researchers after a concept for a new R&D capability is conceived to help guide the safe design, acquisition, installation, and operation of the equipment. It starts with a safety assessment at the early stages such that requirements are implemented to determine the level of risk and degree of complexity presented by the activity so appropriate controls can be put in place to manage the risk. As the equipment requirements and design are refined, appropriate equipment standards are applied. Before the 'to-build' specifications are finalized, a process hazard analysis is performed to ensure that no single-point failure presents an unacceptable risk. Finally, as the tool goes through construction and installation stages, reviews are performed at logical times to ensure that the requisite engineering controls and design are in place and operational. Authorization to

  16. Users guide for ENVSTD program Version 2. 0 and LTGSTD program Version 2. 0

    Energy Technology Data Exchange (ETDEWEB)

    Crawley, D.B.; Riesen, P.K.; Briggs, R.S.

    1989-02-01

    On January 30, 1989, the US Department of Energy (DOE) promulgated 10 CFR Part 435, Subpart A, an Interim Rule entitled ''Energy Conservation Voluntary Performance Standards for New Commercial and Multi-Family High Rise Residential Buildings; Mandatory for New Federal Buildings.'' As a consequence, federal agencies must design all future federal commercial and multifamily high rise residential buildings in accordance with the Standards, or show that their current standards already meet or exceed the energy-efficiency requirements of the Standards. Although these newly enacted Standards do not regulate the design of nonfederal buildings, DOE recommends that all design professionals use the Standards as guidelines for designing energy-conserving buildings. To encourage private sector use, the Standards were presented in the January 30, 1989, Federal Register in the format typical of commercial standards rather than a federal regulation. As a further help, DOE supported the development of various microcomputer programs to ease the use of the Standards. Two of these programs/emdash/ENVSTD (Version 2.0) and LTGSTD (Version 2.0)/emdash/are detailed in this users guide and provided on the accompanying diskette. This package, developed by Pacific Northwest Laboratory (PNL), is intended to facilitate the designer's use of the Standards dealing specifically with a building's envelope and lighting system designs. Using these programs will greatly simplify the designer's task of performing the sometimes complex calculations needed to determine a design's compliance with the Standards. 3 refs., 6 figs.

  17. APEX version 2.0: latest version of the cross-platform analysis program for EXAFS.

    Science.gov (United States)

    Dimakis, N; Bunker, G

    2001-03-01

    This report describes recent progress on APEX, a free, open source, cross platform set of EXAFS data analysis software. In a previous report we described APEX 1.0 (Dimakis, N. and Bunker, G., 1999), a free and open source code suite of basic X-Ray Absorption Fine Structure (XAFS) data analysis programs for classical data reduction and single scattering analysis. The first version of APEX was the only cross platform (linux/irix/windows/MacOS) EXAFS analysis program to our knowledge, but it lacked important features like multiple scattering fitting, generic format conversion from ASCII to University of Washington (UW) binary-type files, and user friendly interactive graphics. In the enhanced version described here we have added cross-platform interactive graphics based on the BLT package, which is an extension to TCL/TK. Some of the utilities have been rewritten in native TCL/TK, allowing for faster and more integrated functionality with the main package. The package also has been ported to SunOS. APEX 2.0 in its current form is suitable for routine data analysis and training. Addition of more advanced methods of data analysis are planned.

  18. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Mike, J., P.E.

    2012-08-30

    The STI product is the Final Technical Report from ReliOn, Inc. for contract award DE-EE0000487: Recovery Act PEM Fuel Cell Systems Providing Emergency Reserve and Backup Power. The program covered the turnkey deployment of 431 ReliOn fuel cell systems at 189 individual sites for AT&T and PG&E with ReliOn functioning as the primary equipment supplier and the project manager. The Final Technical Report provides an executive level summary, a comparison of the actual accomplishments vs. the goals and objectives of the project, as well as a summary of the project activity from the contract award date of August 1, 2009 through the contract expiration date of December 31, 2011. Two photos are included in the body of the report which show hydrogen storage and bulk hydrogen refueling technologies developed as a result of this program.

  19. Inflow Characterization and Aerodynamics Measurements on a SWT-2.3-101 Wind Turbine: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Medina, P.; Singh, M.; Johansen, J.; Jove, A.; Fingersh, L.; Schreck, S.

    2012-01-01

    Post processing techniques for aerodynamic data acquired from a Siemens SWT-2.3-101 turbine have been developed and applied in this paper. The turbine is installed at the National Wind Technology Center (NWTC) as part of Cooperative Research And Development Agreement between Siemens Wind Power and the National Renewable Energy Laboratory (NREL) under U.S. Department of Energy (DOE) sponsorship. The results indicate that the use of these corrections is essential for accurate analysis of the data. An example of local inflow angles, velocities, and inflow velocity over the rotor plane derived from measurements from a 5-hole probe is also presented. Finally the pressure measurements are used to characterize unsteady phenomenon, namely, rotational augmentation and dynamic stall on an inboard station. The results show that the rotational augmentation can considerably increase the attached flow regime compared to the 2D CFD results. The dynamic stall event was seen to significantly delay the stall. Furthermore, the nondimensionalized vortex convection derived from the dynamic stall event was found to agree well with results from others studies.

  20. Metastable Electrical Characteristics of Polycrystalline Thin-Film Photovoltaic Modules upon Exposure and Stabilization: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Deline, C. A.; del Cueto, J. A.; Albin, D. S.; Rummel, S. R.

    2011-09-01

    The significant features of a series of stabilization experiments conducted at the National Renewable Energy Laboratory (NREL) between May 2009 and the present are reported. These experiments evaluated a procedure to stabilize the measured performance of thin-film polycrystalline cadmium telluride (CdTe) and copper indium gallium diselenide (CIGS) thin-film photovoltaic (PV) modules. The current-voltage (I-V) characteristics of CdTe and CIGS thin-film PV devices and modules exhibit transitory changes in electrical performance after thermal exposure in the dark and/or bias and light exposures. We present the results of our case studies of module performance versus exposure: light-soaked at 65 degrees C; exposed in the dark under forward bias at 65 degrees C; and, finally, longer-term outdoor exposure. We find that stabilization can be achieved to varying degrees using either light-soaking or dark bias methods and that the existing IEC 61646 light-soaking interval may be appropriate for CdTe and CIGS modules with one caveat: it is likely that at least three exposure intervals are required for stabilization.

  1. Developing an Instrumentation Package for in-Water Testing of Marine Hydrokinetic Energy Devices: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, E.

    2010-08-01

    The ocean-energy industry is still in its infancy and device developers have provided their own equipment and procedures for testing. Currently, no testing standards exist for ocean energy devices in the United States. Furthermore, as prototype devices move from the test tank to in-water testing, the logistical challenges and costs grow exponentially. Development of a common instrumentation package that can be moved from device to device is one means of reducing testing costs and providing normalized data to the industry as a whole. As a first step, the U.S. National Renewable Energy Laboratory (NREL) has initiated an effort to develop an instrumentation package to provide a tool to allow common measurements across various ocean energy devices. The effort is summarized in this paper. First, we present the current status of ocean energy devices. We then review the experiences of the wind industry in its development of the instrumentation package and discuss how they can be applied in the ocean environment. Next, the challenges that will be addressed in the development of the ocean instrumentation package are discussed. For example, the instrument package must be highly adaptable to fit a large array of devices but still conduct common measurements. Finally, some possible system configurations are outlined followed by input from the industry regarding its measurement needs, lessons learned from prior testing, and other ideas.

  2. Network Reduction Algorithm for Developing Distribution Feeders for Real-Time Simulators: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Nagarajan, Adarsh; Nelson, Austin; Prabakar, Kumaraguru; Hoke, Andy; Asano, Marc; Ueda, Reid; Nepal, Shaili

    2017-06-15

    As advanced grid-support functions (AGF) become more widely used in grid-connected photovoltaic (PV) inverters, utilities are increasingly interested in their impacts when implemented in the field. These effects can be understood by modeling feeders in real-time systems and testing PV inverters using power hardware-in-the-loop (PHIL) techniques. This paper presents a novel feeder model reduction algorithm using a Monte Carlo method that enables large feeders to be solved and operated on real-time computing platforms. Two Hawaiian Electric feeder models in Synergi Electric's load flow software were converted to reduced order models in OpenDSS, and subsequently implemented in the OPAL-RT real-time digital testing platform. Smart PV inverters were added to the real-time model with AGF responses modeled after characterizing commercially available hardware inverters. Finally, hardware inverters were tested in conjunction with the real-time model using PHIL techniques so that the effects of AGFs on the choice feeders could be analyzed.

  3. Design and Analysis for a Floating Oscillating Surge Wave Energy Converter: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Y. H.; Li, Y.; Hallett, K.; Hotimsky, C.

    2014-03-01

    This paper presents a recent study on the design and analysis of an oscillating surge wave energy converter. A successful wave energy conversion design requires the balance between the design performance and cost. The cost of energy is often used as the metric to judge the design of the wave energy conversion system. It is often determined based on the device power performance, the cost for manufacturing, deployment, operation and maintenance, as well as the effort to ensure the environmental compliance. The objective of this study is to demonstrate the importance of a cost driven design strategy and how it can affect a WEC design. Three oscillating surge wave energy converter (OSWEC) designs were used as the example. The power generation performance of the design was modeled using a time-domain numerical simulation tool, and the mass properties of the design were determined based on a simple structure analysis. The results of those power performance simulations, the structure analysis and a simple economic assessment were then used to determine the cost-efficiency of selected OSWEC designs. Finally, a discussion on the environmental barrier, integrated design strategy and the key areas that need further investigation is also presented.

  4. Electrical Power Conversion of a River and Tidal Power Generator: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Muljadi, Eduard; Gevorgian, Vahan; Wright, Alan; Donegan, James; Marnagh, Cian; McEntee, Jarlath

    2016-09-01

    As renewable generation has become less expensive during recent decades, and it becomes more accepted by the global population, the focus on renewable generation has expanded to include new types with promising future applications, such as river and tidal generation. Although the utilization of power electronics and electric machines in industry is phenomenal, the emphasis on system design is different for various sectors of industry. In precision control, robotics, and weaponry, the design emphasis is on accuracy and reliability with less concern for the cost of the final product. In energy generation, the cost of energy is the prime concern; thus, capital expenditures (CAPEX) and operations and maintenance expenditures (OPEX) are the major design objectives. This paper describes the electrical power conversion aspects of river and tidal generation. Although modern power converter control is available to control the generation side, the design was chosen on the bases of minimizing the CAPEX and OPEX; thus, the architecture is simple and modular for ease of replacement and maintenance. The power conversion is simplified by considering a simple diode bridge and a DC-DC power converter to take advantage of abundant and low-cost photovoltaic inverters that have well-proven grid integration characteristics (i.e., the capability to produce energy with good power quality and control real power and voltage on the grid side).

  5. SERA: Simulation Environment for Radiotherapy Applications - Users Manual Version 1CO

    Energy Technology Data Exchange (ETDEWEB)

    Venhuizen, James Robert; Wessol, Daniel Edward; Wemple, Charles Alan; Wheeler, Floyd J; Harkin, G. J.; Frandsen, M. W.; Albright, C. L.; Cohen, M.T.; Rossmeier, M.; Cogliati, J.J.

    2002-06-01

    This document is the user manual for the Simulation Environment for Radiotherapy Applications (SERA) software program developed for boron-neutron capture therapy (BNCT) patient treatment planning by researchers at the Idaho National Engineering and Environmental Laboratory (INEEL) and students and faculty at Montana State University (MSU) Computer Science Department. This manual corresponds to the final release of the program, Version 1C0, developed to run under the RedHat Linux Operating System (version 7.2 or newer) or the Solaris™ Operating System (version 2.6 or newer). SERA is a suite of command line or interactively launched software modules, including graphical, geometric reconstruction, and execution interface modules for developing BNCT treatment plans. The program allows the user to develop geometric models of the patient as derived from Computed Tomography (CT) and Magnetic Resonance Imaging (MRI) images, perform dose computation for these geometric models, and display the computed doses on overlays of the original images as three dimensional representations. This manual provides a guide to the practical use of SERA, but is not an exhaustive treatment of each feature of the code.

  6. Reliability and Validity of the Reduced Spanish Version of the Iowa Infant Feeding Attitude Scale.

    Science.gov (United States)

    Tomás-Almarcha, Rosa; Oliver-Roig, Antonio; Richart-Martinez, Miguel

    2016-01-01

    To translate the Iowa Infant Feeding Scale (IIFAS) into Spanish, to test its psychometric properties, and to explore item reduction for the Spanish version. Instrumental study. Six hospitals in eastern Spain. A convenience sample of 1,354 pregnant women was recruited. The IIFAS was translated using forward and back translation. Dimensional structure, internal consistency, and construct validity of the Spanish IIFAS version were assessed. Criteria to improve the reliability of the scale and the predictive power of the items were used to reduce the scale. Statistics on the psychometric properties suggested the need for item reduction. Cronbach's alpha coefficient of the nine-item final version of the Spanish IIFAS (IIFAS-S) was 0.792. The confirmatory factor analysis showed a unidimensional structure. Demographic response patterns and correlations with the IIFAS-S scale provided further evidence of construct validity. Pregnancy IIFAS-S scores significantly predicted breastfeeding rates and exclusivity. The results of this study indicated that the Spanish translation of the IIFAS is a valid and reliable measure of women's attitudes toward breastfeeding. Copyright © 2016 AWHONN, the Association of Women’s Health, Obstetric and Neonatal Nurses. Published by Elsevier Inc. All rights reserved.

  7. Development of the self-report version of the Zanarini Rating Scale for Borderline Personality Disorder.

    Science.gov (United States)

    Zanarini, Mary C; Weingeroff, Jolie L; Frankenburg, Frances R; Fitzmaurice, Garrett M

    2015-11-01

    The purpose of this study was to assess the psychometric properties of the self-report version of the Zanarini Rating Scale for Borderline Personality Disorder (ZAN-BPD). The measure covers a 1-week time frame, and each of the nine criteria for BPD is rated on a five-point anchored rating scale of 0-4. Seventy-five subjects meeting DSM-IV criteria for BPD were recruited from the community. The convergent validity of the interview and self-report versions of the ZAN-BPD was found to be high (with a median value of 0.70). In terms of reliability, the internal consistency of the nine criteria scores of the ZAN-BPD was found to be good (Cronbach's alpha = 0.84). In addition, 13 of 14 intraclass correlations for same-day test-retest reliability were in the excellent range (> 0.75). Finally, the sensitivity of both versions of the ZAN-BPD to change was assessed 7-10 days after they were first administered and found to be adequate (e.g. r = 0.66 for total score of ZAN-BPD). Taken together, the results of this study suggest that the self-report ZAN-BPD is a promising self-report scale for the assessment of change in the severity of borderline psychopathology over time.

  8. CMS Is Finally Completed

    CERN Multimedia

    2008-01-01

    Yet another step in the completion of the Large Hadron Collider was taken yesterday morning, as the final element of the Compact Muon Solenoid was lowered nearly 100 meters bellow ground. After more than eight years of work at the world's most powerful particle accelerator, scientists hope that they will be able to start initial experiments with the LHC until the end of this year.

  9. Geolocation Technologies Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Magnoli, D E

    2003-06-02

    This paper is the final report for LL998 In Situ Sensing Subtask 7 (Geo-location) undertaken for NNSA NA-22 enabling technologies R&D for Counterproliferation Detection. A few state-of-the-art resolution parameters are presented for accelerometers, indoor and outdoor GPS (Global Positioning Satellite) systems, and INSs (Inertial Navigation Systems). New technologies are described, including one which has demonstrated the ability to track within a building to a resolution of under a foot.

  10. CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (IBM PC VERSION)

    Science.gov (United States)

    Riley, G.

    1994-01-01

    The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh

  11. CLIPS - C LANGUAGE INTEGRATED PRODUCTION SYSTEM (MACINTOSH VERSION)

    Science.gov (United States)

    Culbert, C.

    1994-01-01

    The C Language Integrated Production System, CLIPS, is a shell for developing expert systems. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. The primary design goals for CLIPS are portability, efficiency, and functionality. For these reasons, the program is written in C. CLIPS meets or outperforms most micro- and minicomputer based artificial intelligence tools. CLIPS is a forward chaining rule-based language. The program contains an inference engine and a language syntax that provide a framework for the construction of an expert system. It also includes tools for debugging an application. CLIPS is based on the Rete algorithm, which enables very efficient pattern matching. The collection of conditions and actions to be taken if the conditions are met is constructed into a rule network. As facts are asserted either prior to or during a session, CLIPS pattern-matches the number of fields. Wildcards and variables are supported for both single and multiple fields. CLIPS syntax allows the inclusion of externally defined functions (outside functions which are written in a language other than CLIPS). CLIPS itself can be embedded in a program such that the expert system is available as a simple subroutine call. Advanced features found in CLIPS version 4.3 include an integrated microEMACS editor, the ability to generate C source code from a CLIPS rule base to produce a dedicated executable, binary load and save capabilities for CLIPS rule bases, and the utility program CRSV (Cross-Reference, Style, and Verification) designed to facilitate the development and maintenance of large rule bases. Five machine versions are available. Each machine version includes the source and the executable for that machine. The UNIX version includes the source and binaries for IBM RS/6000, Sun3 series, and Sun4 series computers. The UNIX, DEC VAX, and DEC RISC Workstation versions are line oriented. The PC version and the Macintosh

  12. An HTTP-Based Versioning Mechanism for Linked Data

    CERN Document Server

    Van de Sompel, Herbert; Nelson, Michael L; Balakireva, Lyudmila L; Shankar, Harihar; Ainsworth, Scott

    2010-01-01

    Dereferencing a URI returns a representation of the current state of the resource identified by that URI. But, on the Web representations of prior states of a resource are also available, for example, as resource versions in Content Management Systems or archival resources in Web Archives such as the Internet Archive. This paper introduces a resource versioning mechanism that is fully based on HTTP and uses datetime as a global version indicator. The approach allows "follow your nose" style navigation both from the current time-generic resource to associated time-specific version resources as well as among version resources. The proposed versioning mechanism is congruent with the Architecture of the World Wide Web, and is based on the Memento framework that extends HTTP with transparent content negotiation in the datetime dimension. The paper shows how the versioning approach applies to Linked Data, and by means of a demonstrator built for DBpedia, it also illustrates how it can be used to conduct a time-seri...

  13. Catarse e Final Feliz

    Directory of Open Access Journals (Sweden)

    Myriam Ávila

    2001-12-01

    Full Text Available Resumo: É a certeza de que nada mais – ou nada importante – pode acontecer após o final de um conto que permite o acontecimento da catarse. Se na maioria das narrativas existe algum tipo de dénouement, em algumas delas isso acontece de maneira especialmente satisfatória e afirmativa. O conto de fadas é uma dessas formas narrativas onde o efeito catártico é extremo e preenche objetivos específicos, de acordo com Bruno Bettelheim. Hollywood mimetizou essa forma como estratégia de sedução, iniciando a tradição do final feliz no cinema. A partir do conto de fadas Cinderela, em diferentes versões, juntamente com a animação homônima da Disney e ainda duas versões do filme Sabrina, será traçada aqui uma relação entre a catarse e o final feliz nos contos de fada, bem como seu uso pela indústria cultural. Palavras-chave: catarse, contos de fada, Hollywood

  14. Dialogue is bliss (Italian original version

    Directory of Open Access Journals (Sweden)

    Giancarlo Sturloni

    2008-03-01

    Full Text Available The practice of dialogue does not erase the conflicts that can be found upon solid diverging interests. But conflicts are not forcedly a trauma. More then an impossible abolition of diversity, it is important to promote a practice that helps everybody to express their own point of view looking for socially sustainable solution between the parts. But according to Sturloni, «Even in that case: not a dialogue meant to achieve a utopian unitary view able to level all divergences, but to allow the expression of different perspectives and of legitimate interests. The final aim should be to make a choice shared as much as possible within the legal system of a democratic country».

  15. Two versions of Nakayama lemma for multiplication modules

    Directory of Open Access Journals (Sweden)

    Reza Ameri

    2004-01-01

    Full Text Available The aim of this note is to generalize the Nakayama lemma to a class of multiplication modules over commutative rings with identity. In this note, by considering the notion of multiplication modules and the product of submodules of them, we state and prove two versions of Nakayama lemma for such modules. In the first version we give some equivalent conditions for faithful finitely generated multiplication modules, and in the second version we give them for faithful multiplication modules with a minimal generating set.

  16. Model Adequacy Analysis of Matching Record Versions in Nosql Databases

    Directory of Open Access Journals (Sweden)

    E. V. Tsviashchenko

    2015-01-01

    Full Text Available The article investigates a model of matching record versions. The goal of this work is to analyse the model adequacy. This model allows estimating a user’s processing time distribution of the record versions and a distribution of the record versions count. The second option of the model was used, according to which, for a client the time to process record versions depends explicitly on the number of updates, performed by the other users between the sequential updates performed by a current client. In order to prove the model adequacy the real experiment was conducted in the cloud cluster. The cluster contains 10 virtual nodes, provided by DigitalOcean Company. The Ubuntu Server 14.04 was used as an operating system (OS. The NoSQL system Riak was chosen for experiments. In the Riak 2.0 version and later provide “dotted vector versions” (DVV option, which is an extension of the classic vector clock. Their use guarantees, that the versions count, simultaneously stored in DB, will not exceed the count of clients, operating in parallel with a record. This is very important while conducting experiments. For developing the application the java library, provided by Riak, was used. The processes run directly on the nodes. In experiment two records were used. They are: Z – the record, versions of which are handled by clients; RZ – service record, which contains record update counters. The application algorithm can be briefly described as follows: every client reads versions of the record Z, processes its updates using the RZ record counters, and saves treated record in database while old versions are deleted form DB. Then, a client rereads the RZ record and increments counters of updates for the other clients. After that, a client rereads the Z record, saves necessary statistics, and deliberates the results of processing. In the case of emerging conflict because of simultaneous updates of the RZ record, the client obtains all versions of that

  17. Verification of BModes: Rotary Beam and Tower Modal Analysis Code; Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Bir, G.

    2010-04-01

    This paper describes verification of BModes, a finite-element code developed to provide coupled modes for the blades and tower of a wind turbine. The blades, which may be rotating or non-rotating, and the towers, whether onshore or offshore, are modeled using specialized 15-dof beam finite elements. Both blade and tower models allow a tip attachment, which is assumed to be rigid body with six moments of inertia, and a mass centroid that may be offset from the blade or tower axis. Examples of tip attachments are aerodynamic brakes for blades and nacelle-rotor subassembly for towers. BModes modeling allows for tower supports including tension wires, floating platforms, and monopiles on elastic foundations. Coupled modes (implying coupling of flap, lag, axial, and torsional motions) are required for modeling major flexible components in a modal-based, aeroelastic code such as FAST1. These are also required for validation of turbine models using experimental data, modal-based fatigue analysis, controls design, and understanding aeroelastic-stability behavior of turbines. Verification studies began with uniform tower models, with and without tip inertia, and progressed to realistic towers. For the floating turbine, we accounted for the effects of hydrodynamic inertia, hydrostatic restoring, and mooring lines stiffness. For the monopole-supported tower, we accounted for distributed hydrodynamic mass on the submerged part of the tower and for distributed foundation stiffness. Finally, we verified a model of a blade carrying tip mass and rotating at different speeds (verifications of other blade models, rotating or non-rotating, have been reported in another paper.) Verifications were performed by comparing BModes-generated modes with analytical results, if available, or with MSC.ADAMS results. All results in general show excellent agreement.

  18. A Fast Version of LASG/IAP Climate System Model and Its 1000-year Control Integration

    Institute of Scientific and Technical Information of China (English)

    ZHOU Tianjun; WU Bo; WEN Xinyu; LI Lijuan; WANG Bin

    2008-01-01

    A fast version of the State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geo- physical Fluid Dynamics (LASG)/Institute of Atmospheric Physics (IAP) climate system model is briefly documented. The fast coupled model employs a low resolution version of the atmospheric component Grid Atmospheric Model of IAP/LASG (GAMIL), with the other parts of the model, namely an oceanic com- ponent LASG/IAP Climate Ocean Model (LICOM), land component Common Land Model (CLM), and sea ice component from National Center for Atmospheric Research Community Climate System Model (NCAR CCSM2), as the same as in the standard version of LASG/IAP Flexible Global Ocean Atmosphere Land System model (FGOALS_g). The parameterizatious of physical and dynamical processes of the at- mospheric component in the fast version are identical to the standard version, although some parameter values are different. However, by virtue of reduced horizontal resolution and increased time-step of the most time-consuming atmospheric component, it runs faster by a factor of 3 and can serve as a useful tool for long- term and large-ensemble integrations. A 1000-year control simulation of the present-day climate has been completed without flux adjustments. The final 600 years of this simulation has virtually no trends in global mean sea surface temperatures and is recommended for internal variability studies. Several aspects of the control simulation's mean climate and variability axe evaluated against the observational or reanalysis data. The strengths and weaknesses of the control simulation are evaluated. The mean atmospheric circulation is well simulated, except in high latitudes. The Asian-Australian monsoonal meridional cell shows realistic features, however, an artificial rainfall center is located to the eastern periphery of the Tibetan Plateau persists throughout the year. The mean bias of SST resembles that of the standard version, appearing as a "double ITCZ" (Inter

  19. Schedulability Analysis for Java Finalizers

    DEFF Research Database (Denmark)

    Bøgholm, Thomas; Hansen, Rene Rydhof; Ravn, Anders P.;

    2010-01-01

    Java finalizers perform clean-up and finalisation of objects at garbage collection time. In real-time Java profiles the use of finalizers is either discouraged (RTSJ, Ravenscar Java) or even disallowed (JSR-302), mainly because of the unpredictability of finalizers and in particular their impact ...... programs. Finally, we extend the SARTS tool for automated schedulability analysis of Java bytecode programs to handle finalizers in a fully automated way.......Java finalizers perform clean-up and finalisation of objects at garbage collection time. In real-time Java profiles the use of finalizers is either discouraged (RTSJ, Ravenscar Java) or even disallowed (JSR-302), mainly because of the unpredictability of finalizers and in particular their impact...... on the schedulability analysis. In this paper we show that a controlled scoped memory model results in a structured and predictable execution of finalizers, more reminiscent of C++ destructors than Java finalizers. Furthermore, we incorporate finalizers into a (conservative) schedulability analysis for Predictable Java...

  20. The propagation effect of paper version and the iPad version for periodicals

    Directory of Open Access Journals (Sweden)

    Cong Zhang

    2015-04-01

    Full Text Available Purpose: Digital journal created a new development pattern. We use journal APP as an example to analyze how to migrate the journal content to Internet and other kind of media. Based on the case study of GQ and other fashion magazines, through text analysis, control experiments, in-depth interviews and other research methods, the authors analyzed the differences and connections between the iPad App and print edition of magazines, discussed the approaches towards operation of new media, offered the tendency of mobile device platform development for China’s periodical publications. Design/methodology/approach: control experiment. Findings: The authors give a stance that the print edition of periodical publication will being alive still, and conclude that journal APP and printed version can be mutually beneficial and achieve a win-win state. And we believe that the journal APP is good at advertising propagation, which will accelerate the development of journal APP in such the information age, and such kind of media can integrate many information with variety of media forms. Research limitations/implications: Because of the limitation of technology, the authors only have the experiment on fashion magazine, which might to some degree simplify the issue under discussion. Practical implications: According to the conclusion of a series of experiments, we can imply the future of the media, and give the suggestion of both paper version and ipad version of the journal. Social implications: Since people can not live without media and media has to develope with the help of public, we have to give the new way of both sunrise media and sunset media. Originality/value: Based on the case study of GQ and other fashion magazines, through text analysis, control experiments, in-depth interviews and other research methods, the authors analyzed the differences and connections between the iPad App and print edition of magazines, discussed the approaches towards

  1. Validation of the traditional Chinese version of the Menopausal Rating Scale with WHOQOL-BREF.

    Science.gov (United States)

    Wu, H-c; Wen, S-h; Hwang, J-s; Huang, S-c

    2015-10-01

    Objective To assess the criterion validity, construct validity and test-retest reliability of the traditional Chinese language version of the Menopause Rating Scale (MRS-TC version). Methods This was an observational, cross-sectional study covering hospital and community samples of 317 women aged 39-62 years. Two questionnaires were administered, namely, the MRS-TC version, made up of 11 items in three dimensions, and the World Health Organization Quality of Life-BREF (WHOQOL-BREF). The intraclass correlation coefficient was used to examine the test-retest reliability of the questionnaire on two separate occasions, 2 weeks apart. The internal consistency was assessed with Cronbach's α. To evaluate criterion validity, the relationship between the individual items and dimension scores of both instruments was estimated. Pearson's correlation was used to assess convergent and discriminant validity; construct validity was evaluated by comparing the mean scores of menopausal and non-menopausal women for each of the MRS dimensions. Results The final questionnaire comprised 11 items in three dimensions. The intra-class correlation (ICC) for the test-retest reliability ranged from 0.83 to 0.93; values of Cronbach's α for psychological, somatic, and urogenital symptom domains were 0.88, 0.68, and 0.59, respectively. For the convergent and discriminant validity, the correlations between the individual questionnaire and the WHOQOL-BREF were significant; those with the MRS dimensions were significantly negatively associated for the physical, psychological, social and environmental domains. Conclusion The MRS-TC version using the traditional Chinese language is a reliable and valid questionnaire for assessing menopausal symptoms and global quality of life in climacteric women.

  2. Genre Analysis:Comparison between the Original Version of The Won-derful Wizard of Oz and One Version of Its Abridgements

    Institute of Scientific and Technical Information of China (English)

    律琳琳

    2014-01-01

    The Wonderful Wizard of Oz is a world-renowned novel . This essay compares the original version and one abridged version. The abridged version keeps the main plot of the original version and easy to read, but loses the embedded message and decreases pleasure of reading. It may help varied readers choose literary works and induct ELS teachers to arrange reading lists for students.

  3. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Sobecky, Patricia A; Taillefert, Martial

    2013-03-29

    This final technical report describes results and findings from a research project to examine the role of microbial phosphohydrolase enzymes in naturally occurring subsurface microorganisms for the purpose of promoting the immobilization of the radionuclide uranium through the production of insoluble uranium phosphate minerals. The research project investigated the microbial mechanisms and the physical and chemical processes promoting uranium biomineralization and sequestration in oxygenated subsurface soils. Uranium biomineralization under aerobic conditions can provide a secondary biobarrier strategy to immobilize radionuclides should the metal precipitates formed by microbial dissimilatory mechanisms remobilize due to a change in redox state.

  4. Service dogs. Final rule.

    Science.gov (United States)

    2012-09-05

    The Department of Veterans Affairs (VA) amends its regulations concerning veterans in need of service dogs. Under this final rule, VA will provide to veterans with visual, hearing, or mobility impairments benefits to support the use of a service dog as part of the management of such impairments. The benefits include assistance with veterinary care, travel benefits associated with obtaining and training a dog, and the provision, maintenance, and replacement of hardware required for the dog to perform the tasks necessary to assist such veterans.

  5. Prometheus Project final report

    Science.gov (United States)

    Taylor, Randall

    2005-01-01

    This Final Report serves as an executive summary of the Prometheus Project's activities and deliverables from November 2002 through September 2005. It focuses on the challenges from a technical and management perspective, what was different and innovative about this project, and identifies the major options, decisions, and accomplishments of the Project team as a whole. However, the details of the activities performed by DOE NR and its contractors will be documented separately in accordance with closeout requirements of the DOE NR and consistent with agreements between NASA and NR.

  6. Procedure guideline for radioiodine test (version 3); Verfahrensanweisung zum Radioiodtest (Version 3)

    Energy Technology Data Exchange (ETDEWEB)

    Dietlein, M.; Schicha, H. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Koeln Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin; Dressler, J. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Nuklearmedizinische Klinik der Henriettenstiftung, Hannover (Germany); Eschner, W. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Deutsche Gesellschaft fuer Medizinische Physik (DGMP) (Germany); Koeln Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin; Lassmann, M. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Deutsche Gesellschaft fuer Medizinische Physik (DGMP) (Germany); Wuerzburg Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin; Leisner, B. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Allgemeines Krankenhaus St. Georg, Hamburg (Germany). Abt. fuer Nuklearmedizin; Reiners, C. [Deutsche Gesellschaft fuer Nuklearmedizin (DGN) (Germany); Wuerzburg Univ. (Germany). Klinik und Poliklinik fuer Nuklearmedizin

    2007-07-01

    The version 3 of the procedure guideline for radioiodine test is an update of the guideline previously published in 2003. The procedure guideline discusses the pros and cons of a single measurement or of repeated measurements of the iodine-131 uptake and their optimal timing. Different formulas are described when one, two or three values of the radioiodine kinetic are available. The probe with a sodium-iodine crystal, alternatively or additionally the gamma camera using the ROI-technique are instrumentations for the measurement of iodine-131 uptake. A possible source of error is an inappropriate measurement (sonography) of the target volume. The patients' preparation includes the withdrawal of antithyroid drugs 2-3 days before radioiodine administration. The patient has to avoid iodine-containing medication and the possibility of additives of iodine in vitamin- and electrolyte-supplementation has to be considered. (orig.)

  7. Original Research Psychometric evaluation of the Shona version of ...

    African Journals Online (AJOL)

    were performed to assess the structural validity of the MSPSS-Shona version. Reliability was assessed .... term conditions like diabetes, HIV/AIDS among others were similarly excluded ..... Given the high literacy level of the study participants,.

  8. U.S. Climate Divisional Dataset (Version Superseded)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data has been superseded by a newer version of the dataset. Please refer to NOAA's Climate Divisional Database for more information. The U.S. Climate Divisional...

  9. ARROW (Version 2) Commercial Software Validation and Configuration Control

    Energy Technology Data Exchange (ETDEWEB)

    HEARD, F.J.

    2000-02-10

    ARROW (Version 2), a compressible flow piping network modeling and analysis computer program from Applied Flow Technology, was installed for use at the U.S. Department of Energy Hanford Site near Richland, Washington.

  10. Climate Forecast System Version 2 (CFSv2) Operational Forecasts

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Climate Forecast System Version 2 (CFSv2) produced by the NOAA National Centers for Environmental Prediction (NCEP) is a fully coupled model representing the...

  11. Global Historical Climatology Network - Daily (GHCN-Daily), Version 3

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Global Historical Climatology Network - Daily (GHCN-Daily) dataset integrates daily climate observations from approximately 30 different data sources. Version 3...

  12. Geostationary Surface and Insolation Products (GSIP), Version 3

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Geostationary Surface and Insolation Products (GSIP) Version 3 contains upwelling and downwelling shortwave (0.2-4.0 um) and visible (0.4-0.7 um) radiative...

  13. Global Precipitation Climatology Project (GPCP) - Pentad, Version 2.2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Global Precipitation Climatology Project (GPCP) comprises a total of 27 products. The Version 2.2 Pentad product covers the period January 1979 to the present,...

  14. Industrial Waste Management Evaluation Model Version 3.1

    Science.gov (United States)

    IWEM is a screening level ground water model designed to simulate contaminant fate and transport. IWEM v3.1 is the latest version of the IWEM software, which includes additional tools to evaluate the beneficial use of industrial materials

  15. Measurable versions of the LS category on laminations

    CERN Document Server

    Meniño, Carlos

    2011-01-01

    We give two new versions of the LS category for the set-up of measurable laminations defined by Berm\\'udez. Both of these versions must be considered as "tangential categories". The first one, simply called (LS) category, is the direct analogue for measurable laminations of the tangential category of (topological) laminations introduced by Colman Vale and Mac\\'ias Virg\\'os. For the measurable lamination that underlies any lamination, our measurable tangential category is a lower bound of the tangential category. The second version, called the measured category, depends on the choice of a transverse invariant measure. We show that both of these "tangential categories" satisfy appropriate versions of some well known properties of the classical category: the homotopy invariance, a dimensional upper bound, a cohomological lower bound (cup length), and an upper bound given by the critical points of a smooth function.

  16. Climate Forecast System Version 2 (CFSv2) Operational Analysis

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Climate Forecast System Version 2 (CFSv2) produced by the NOAA National Centers for Environmental Prediction (NCEP) is a fully coupled model representing the...

  17. Multiclass Classification Based on the Analytical Center of Version Space

    Institute of Scientific and Technical Information of China (English)

    ZENGFanzi; QIUZhengding; YUEJianhai; LIXiangqian

    2005-01-01

    Analytical center machine, based on the analytical center of version space, outperforms support vector machine, especially when the version space is elongated or asymmetric. While analytical center machine for binary classification is well understood, little is known about corresponding multiclass classification.Moreover, considering that the current multiclass classification method: “one versus all” needs repeatedly constructing classifiers to separate a single class from all the others, which leads to daunting computation and low efficiency of classification, and that though multiclass support vector machine corresponds to a simple quadratic optimization, it is not very effective when the version spaceis asymmetric or elongated, Thus, the multiclass classification approach based on the analytical center of version space is proposed to address the above problems. Experiments on wine recognition and glass identification dataset demonstrate validity of the approach proposed.

  18. Acetabular fracture types vary with different acetabular version

    National Research Council Canada - National Science Library

    Werner, Clément M. L; Copeland, Carol E; Ruckstuhl, Thomas; Stromberg, Jeff; Turen, Clifford H; Bouaicha, Samy

    2012-01-01

    .... While several investigations figured out what role femoral position during impact plays in distinct fracture patterns, no data exists on the influence of acetabular version on the fracture type...

  19. Global Precipitation Climatology Project (GPCP) - Daily, Version 1.2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Global Precipitation Climatology Project (GPCP) comprises a total of 27 products. The Version 1.2 Daily product covers the period October 1998 to the present,...

  20. Nuclear Criticality Safety Handbook, Version 2. English translation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-08-01

    The Nuclear Criticality Safety Handbook, Version 2 essentially includes the description of the Supplement Report to the Nuclear Criticality Safety Handbook, released in 1995, into the first version of the Nuclear Criticality Safety Handbook, published in 1988. The following two points are new: (1) exemplifying safety margins related to modeled dissolution and extraction processes, (2) describing evaluation methods and alarm system for criticality accidents. Revision has been made based on previous studies for the chapter that treats modeling the fuel system: e.g., the fuel grain size that the system can be regarded as homogeneous, non-uniformity effect of fuel solution, an burnup credit. This revision has solved the inconsistencies found in the first version between the evaluation of errors found in JACS code system and the criticality condition data that were calculated based on the evaluation. This report is an English translation of the Nuclear Criticality Safety Handbook, Version 2, originally published in Japanese as JAERI 1340 in 1999. (author)

  1. TAE+ 5.1 - TRANSPORTABLE APPLICATIONS ENVIRONMENT PLUS, VERSION 5.1 (SUN3 VERSION)

    Science.gov (United States)

    TAE SUPPORT OFFICE

    1994-01-01

    workbench-generated resource files during each execution, details such as color, font, location, and object type remain independent from the application code, allowing changes to the user interface without recompiling and relinking. The Silicon Graphics version of TAE Plus now has a font caching scheme and a color caching scheme to make color allocation more efficient. In addition to WPTs, TAE Plus can control interaction of objects from the interpreted TAE Command Language. TCL provides an extremely powerful means for the more experienced developer to quickly prototype an application's use of TAE Plus interaction objects and add programming logic without the overhead of compiling or linking. TAE Plus requires MIT's X Window System, Version 11 Release 4, and the Open Software Foundation's Motif Toolkit 1.1 or 1.1.1. The Workbench and WPTs are written in C++ and the remaining code is written in C. TAE Plus is available by license for an unlimited time period. The licensed program product includes the TAE Plus source code and one set of supporting documentation. Additional documentation may be purchased separately at the price indicated below. The amount of disk space required to load the TAE Plus tar format tape is between 35Mb and 67Mb depending on the machine version. The recommended minimum memory is 12Mb. Each TAE Plus platform delivery tape includes pre-built libraries and executable binary code for that particular machine, as well as source code, so users do not have to do an installation. Users wishing to recompile the source will need both a C compiler and either GNU's C++ Version 1.39 or later, or a C++ compiler based on AT&T 2.0 cfront. TAE Plus comes with InterViews and idraw, two software packages developed by Stanford University and integrated in TAE Plus. TAE Plus was developed in 1989 and version 5.1 was released in 1991. TAE Plus is currently available on media suitable for eight different machine platforms: 1) DEC VAX computers running VMS 5.3 or higher (TK

  2. TAE+ 5.1 - TRANSPORTABLE APPLICATIONS ENVIRONMENT PLUS, VERSION 5.1 (DEC VAX ULTRIX VERSION)

    Science.gov (United States)

    TAE SUPPORT OFFICE

    1994-01-01

    workbench-generated resource files during each execution, details such as color, font, location, and object type remain independent from the application code, allowing changes to the user interface without recompiling and relinking. The Silicon Graphics version of TAE Plus now has a font caching scheme and a color caching scheme to make color allocation more efficient. In addition to WPTs, TAE Plus can control interaction of objects from the interpreted TAE Command Language. TCL provides an extremely powerful means for the more experienced developer to quickly prototype an application's use of TAE Plus interaction objects and add programming logic without the overhead of compiling or linking. TAE Plus requires MIT's X Window System, Version 11 Release 4, and the Open Software Foundation's Motif Toolkit 1.1 or 1.1.1. The Workbench and WPTs are written in C++ and the remaining code is written in C. TAE Plus is available by license for an unlimited time period. The licensed program product includes the TAE Plus source code and one set of supporting documentation. Additional documentation may be purchased separately at the price indicated below. The amount of disk space required to load the TAE Plus tar format tape is between 35Mb and 67Mb depending on the machine version. The recommended minimum memory is 12Mb. Each TAE Plus platform delivery tape includes pre-built libraries and executable binary code for that particular machine, as well as source code, so users do not have to do an installation. Users wishing to recompile the source will need both a C compiler and either GNU's C++ Version 1.39 or later, or a C++ compiler based on AT&T 2.0 cfront. TAE Plus comes with InterViews and idraw, two software packages developed by Stanford University and integrated in TAE Plus. TAE Plus was developed in 1989 and version 5.1 was released in 1991. TAE Plus is currently available on media suitable for eight different machine platforms: 1) DEC VAX computers running VMS 5.3 or higher (TK

  3. The Swedish P-CAT: modification and exploration of psychometric properties of two different versions.

    Science.gov (United States)

    Selan, Denis; Jakobsson, Ulf; Condelius, Anna

    2016-08-08

    The aim of this study was to further investigate the psychometric properties (with focus on construct validity and scale function) of the Swedish version of the Person-centred Care Assessment Tool (P-CAT) in a sample consisting of staff working in elderly care units (N = 142). The aim was also to further develop and psychometrically test a modified, noncontext-specific version of the instrument (mP-CAT) in a sample consisting of staff working in primary health care or within home care for older people (N = 182). Principal component analysis with varimax rotation initially suggested a three-factor solution for the P-CAT, explaining 55.96% of variance. Item 13 solely represented one factor wherefore this solution was rejected. A final 2-factor solution, without item 13, had a cumulative explained variance of 50.03%. All communalities were satisfactory (>0.3), and alpha values for both first factor (items 1-6, 11) and second factor (items 7-10, 12) were found to be acceptable. Principal component analysis with varimax rotation suggested a final 2-factor solution for the mP-CAT explaining 46.15% of the total variance with communalities ranging from 0.263 to 0.712. Cronbach's α for both factors was found to be acceptable (>0.7). This study suggests a 2-factor structure for the P-CAT and an exclusion of item 13. The results indicated that the modified noncontext-specific version, mP-CAT, seems to be a valid measure. Further psychometric testing of the mP-CAT is however needed in order to establish the instrument's validity and reliability in various contexts.

  4. The Nordic version of working poor

    DEFF Research Database (Denmark)

    Ilsøe, Anna

    identified new segments of workers in private services at the bottom of the labour market like the ‘emergent service workers’ or the ‘precariat’ in the UK or the ‘working poor’ in the US and Germany (Klein & Rones 1989; Palier & Thelen 2010; Savage et al. 2013; Standing 2011). Although the incidence of low......-wage service work is somewhat lower in the Nordic countries than in the rest of Europe (Bosch & Lehndorff 2005), it is increasingly addressed and debated (Tryggstad et al. 2011; Andersen & Felbo-Kolding 2013; Nergaard 2013; Ilsøe & Felbo-Kolding 2014). Employees find it hard to make a living from their wages....../restaurants, as the majority of low-wage private service workers in Denmark, Norway and Sweden work in these sectors (Bosch & Lehndorff 2005). We compare developments in the three countries to identify similar and different segments that have emerged over the past 15 years. Finally, the paper discusses findings in relation...

  5. CODEX: exploration of semantic changes between ontology versions.

    Science.gov (United States)

    Hartung, Michael; Gross, Anika; Rahm, Erhard

    2012-03-15

    Life science ontologies substantially change over time to meet the requirements of their users and to include the newest domain knowledge. Thus, an important task is to know what has been modified between two versions of an ontology (diff). This diff should contain all performed changes as compact and understandable as possible. We present CODEX (Complex Ontology Diff Explorer), a tool that allows determining semantic changes between two versions of an ontology, which users can interactively analyze in multiple ways.

  6. An all-FORTRAN version of NASTRAN for the VAX

    Science.gov (United States)

    Purves, L.

    1981-01-01

    All FORTRAN version of NASA structural analysis program NASATRAN is implemented on DEC VAX-series computer. Applications of NASATRAN extend to almost every type of linear structure and construction. Two special features are available in VAX version; program is executed from terminal in manner permitting use of VAX interactive debugger, and links are interactively restarted when desired by first making copy of all NASATRAN work files.

  7. Cosmology Without Finality

    Science.gov (United States)

    Mahootian, F.

    2009-12-01

    The rapid convergence of advancing sensor technology, computational power, and knowledge discovery techniques over the past decade has brought unprecedented volumes of astronomical data together with unprecedented capabilities of data assimilation and analysis. A key result is that a new, data-driven "observational-inductive'' framework for scientific inquiry is taking shape and proving viable. The anticipated rise in data flow and processing power will have profound effects, e.g., confirmations and disconfirmations of existing theoretical claims both for and against the big bang model. But beyond enabling new discoveries can new data-driven frameworks of scientific inquiry reshape the epistemic ideals of science? The history of physics offers a comparison. The Bohr-Einstein debate over the "completeness'' of quantum mechanics centered on a question of ideals: what counts as science? We briefly examine lessons from that episode and pose questions about their applicability to cosmology. If the history of 20th century physics is any indication, the abandonment of absolutes (e.g., space, time, simultaneity, continuity, determinacy) can produce fundamental changes in understanding. The classical ideal of science, operative in both physics and cosmology, descends from the European Enlightenment. This ideal has for over 200 years guided science to seek the ultimate order of nature, to pursue the absolute theory, the "theory of everything.'' But now that we have new models of scientific inquiry powered by new technologies and driven more by data than by theory, it is time, finally, to relinquish dreams of a "final'' theory.

  8. The final cool down

    CERN Multimedia

    Thursday 29th May, the cool-down of the final sector (sector 4-5) of LHC has begun, one week after the start of the cool-down of sector 1-2. It will take five weeks for the sectors to be cooled from room temperature to 5 K and a further two weeks to complete the cool down to 1.9 K and the commissioning of cryogenic instrumentation, as well as to fine tune the cryogenic plants and the cooling loops of cryostats.Nearly a year and half has passed since sector 7-8 was cooled for the first time in January 2007. For Laurent Tavian, AT/CRG Group Leader, reaching the final phase of the cool down is an important milestone, confirming the basic design of the cryogenic system and the ability to operate complete sectors. “All the sectors have to operate at the same time otherwise we cannot inject the beam into the machine. The stability and reliability of the cryogenic system and its utilities are now very important. That will be the new challenge for the coming months,” he explains. The status of the cool down of ...

  9. A Performance Comparison for Two Versions of the Vulcan Photometer

    Science.gov (United States)

    Borucki, W. J.; Caldwell, D. A.; Koch, D. G.; Jenkins, J. M.; Showen, R. L.

    2001-01-01

    Analysis of the images produced by the first version (V1) of the Vulcan photometer indicated that two major sources of noise were sky brightness and image motion. To reduce the effect of the sky brightness, a second version (V2) with a longer focal length and a larger format detector was developed and tested. The first version consisted of 15-centimeter (cm) focal length, F/1.5 Aerojet Delft reconnaissance lens, and a 2048 x 2048 format front-illuminated charged coupled device (CCD) with 9 microns micropixels (Mpixels). The second version used a 30-cm focal length, F/2.5 Kodak AeroEktar lens, and a 4096 x 4096 format CCD with 9 micro pixels. Both have a 49-square-degree field of view (FOV) but the area of the sky subtended by each pixel in the V2 version is one-fourth that of the V1 version. This modification substantially reduces the shot noise due to the sky background and allows fainter stars to be monitored for planetary transits. To remove the data gap and consequent signal-level change caused by flipping the photometer around the declination axis and to reduce image movement on the detector, several other modifications were incorporated. These include modifying the mount and stiffening the photometer and autoguider structures to reduce flexure. This paper compares the performance characteristics of each photometer and discusses tests to identify sources of systematic noise.

  10. Validation of a Persian version of the OIDP index

    Directory of Open Access Journals (Sweden)

    Sheiham Aubrey

    2007-01-01

    Full Text Available Abstract Background Measuring the impacts of oral conditions on quality of life is an important part of oral health needs assessment. For this purpose a variety of oral health-related quality of life instruments have been developed. To use a scale in a new context or with a different groups of people, it is necessary to re-establish its psychometric properties. The objectives of this study are to develop and test the reliability and validity of the Persian version of Oral Impacts on Daily Performances (OIDP index. Methods The Persian version of OIDP index was developed through a linguistic translation exercise. The psychometric properties of the Persian version of OIDP were evaluated in terms of face, content, construct and criterion validity in addition to internal and test-retest reliability. A convenience sample of 285 working adults aged 20–50 living in Mashad was recruited (91% response rate to evaluate the Persian version. Results The Persian version of OIDP had excellent validity and reliability charactersitics. Weighted Kappa was 0.91. Cronbachs alpha coefficient was 0.79. The index showed significant associations with self-rated oral and general health status, as well as perceived dental treatment needs, satisfaction with mouth and prevalence of pain in mouth (P Conclusion The Persian version of OIDP index is a valid and reliable measure for use in 20 to 50 year old working Iranians.

  11. Special population planner, version 4.0.

    Energy Technology Data Exchange (ETDEWEB)

    Kuiper, J.; Tanzman, E.; Metz, W.

    2007-03-26

    Emergencies happen every day. Many are caused by storms or auto accidents and can be planned for, if not predicted. Emergencies resulting from natural hazards often affect a large number of people, and planning for them can be difficult, since knowledge of the needs of the people involved is generally unavailable. Emergencies resulting from accidents at industrial and military facilities can also be large scale in nature if people must be evacuated or sheltered in place. Federal planning for large scale emergencies is the responsibility of the Federal Emergency Management Agency (FEMA), which provides assistance to various emergency management agencies at the national, state and local level. More information about FEMA is available at http://www.fema.gov/. The purpose of the Special Population Planner (SPP) is to help emergency planners address the needs of persons with special needs. The exact definition of 'special population' is a policy decision. Policymakers have included a variety of groups in this term, such as persons with disabilities, those who do not have vehicles with which to evacuate, children who are unattended at times (latchkey children), and many others. The SPP was developed initially for the Alabama Emergency Management Agency as part of its Chemical Stockpile Emergency Preparedness Program (CSEPP), which aids emergency planning and preparedness in communities surrounding military installations across the United States where chemical weapons are stored pending their destruction under federal law. Like that specialized application, this open-source version contains a set of specialized Geographic Information System (GIS) tools to facilitate emergency planning on behalf of persons with special needs, regardless of how the term is defined. While the original SPP system was developed for emergency planning relating to chemical hazards, it can be applied to other threats as well. It is apparent from Hurricane Katrina and other natural and

  12. Physics-Based GOES Satellite Product for Use in NREL's National Solar Radiation Database: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Sengupta, M.; Habte, A.; Gotseff, P.; Weekley, A.; Lopez, A.; Molling, C.; Heidinger, A.

    2014-07-01

    The National Renewable Energy Laboratory (NREL), University of Wisconsin, and National Oceanic Atmospheric Administration are collaborating to investigate the integration of the Satellite Algorithm for Shortwave Radiation Budget (SASRAB) products into future versions of NREL's 4-km by 4-km gridded National Solar Radiation Database (NSRDB). This paper describes a method to select an improved clear-sky model that could replace the current SASRAB global horizontal irradiance and direct normal irradiances reported during clear-sky conditions.

  13. A Comparative Review Of Internet Protocol Version 4 (IPv4) and Internet Protocol Version 6 (IPv6)

    OpenAIRE

    Babatunde, Olabenjo; Al-Debagy, Omar

    2014-01-01

    Many computers and devices are becoming more connected to the internet in recent years; the use of the Internet Protocol (IP) has made the connectivity and identification of these devices possible in large scale. In this paper, we will discuss the evolution of Internet Protocol version 4 (IPv4), its features, issues and limitations and how Internet Protocol version 6 (IPv6) tends to solve some of these issues including the differences and transition between these two protocols.

  14. Measuring Mentalizing Ability: A Within-Subject Comparison between an Explicit and Implicit Version of a Ball Detection Task

    Science.gov (United States)

    Nijhof, Annabel D.; Brass, Marcel; Bardi, Lara; Wiersema, Jan R.

    2016-01-01

    The concept of mentalizing has been widely studied, but almost exclusively through tasks with explicit instructions. Recent studies suggest that people also mentalize on a more implicit level. However, to our knowledge, no study to date has directly contrasted the effects of implicit and explicit mentalizing processes on an implicit dependent measure within-subjects. We implemented this by using two versions of an object detection task, differing only on secondary catch questions. We hypothesized that if explicit mentalizing relies on complementary processes beyond those underlying implicit mentalizing, this would be reflected in enhanced belief effects in the explicit version. Twenty-eight healthy adults watched movies in which, during the first phase, both they themselves and another agent formed a belief about the location of a ball, and although irrelevant, these beliefs could influence their ball detection reaction times in the second phase. After this response phase, there were occasional catch questions that were different for the explicit and implicit task version. Finally, self-report measures of autism spectrum disorder (ASD) symptomatology were included, as the literature suggests that ASD is related to a specific deficit in implicit mentalizing. Both in the explicit and implicit version, belief conditions had a significant effect on reaction times, with responses being slower when neither the participant nor the other agent expected the ball to be present compared to all other conditions. Importantly, after the implicit version, participants reported no explicit mentalizing awareness. In our neurotypical sample, ASD symptoms were not found to correlate with either explicit or implicit mentalizing. In conclusion, the reaction time patterns in the explicit and implicit version of the task show strikingly similar effects of mentalizing, indicating that participants processed beliefs to the same extent regardless of whether they mentalized explicitly or

  15. Translation, cross-cultural adaptation, and validity of the Korean version of the pain sensitivity questionnaire in chronic pain patients.

    Science.gov (United States)

    Kim, Ho-Joong; Ruscheweyh, Ruth; Yeo, Ji-Hyun; Cho, Hyeon-Guk; Yi, Je-Min; Chang, Bong-Soon; Lee, Choon-Ki; Yeom, Jin S

    2014-11-01

    The purpose of this study was to translate pain sensitivity questionnaires (PSQ) into the Korean language, perform a cross-cultural adaption of the PSQ, and validate the Korean version of PSQ in patients with degenerative spinal disease. The PSQ was translated forward and backward, cross-culturally adapted by 2 independent translators, and approved by an expert committee. The final Korean version of the PSQ was tested on 72 patients with degenerative spinal disease. Test-retest reliability was evaluated for 60 patients (83%) who completed the second assessment in an interval of 4 weeks. The mean PSQ-minor, PSQ-moderate, and PSQ-total (standard deviation [SD]) were 5.40 (2.02), 6.46 (1.98), and 5.93 (1.93), respectively. The PSQ-total, PSQ-minor, and PSQ-moderate of the Korean version showed very good internal consistencies determined by the Cronbach's α of 0.926, 0.869, and 0.877, respectively. For convergent validity, the PSQ scores of the Korean version showed significant correlations with pain catastrophizing scale (PCS) (r = 0.377, P = 0.002; r = 0.365, P = 0.003; r = 0.362, P = 0.003 for PSQ-total, PSQ-minor, and PSQ-moderate of the Korean version, respectively). For test-retest reliability, the intraclass correlation coefficients were 0.782 for PSQ-total, 0.752 for PSQ-minor, and 0.793 for PSQ-moderate. In conclusion, the validated Korean version of PSQ is a transculturally equivalent, reliable, and valid tool to assess individual pain sensitivity. © 2013 World Institute of Pain.

  16. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    John Tanis

    2005-11-25

    This document comprises the final technical report for atomic collisions research supported by DOE grant No. DE-FG02-87ER13778 from September 1, 2001 through August 31, 2004. The research involved the experimental investigation of excitation and charge-changing processes occurring in ion-atom and ion-molecule collisions. Major emphases of the study were: (1) interference effects resulting from coherent electron emission in H2, (2) production of doubly vacant K-shell (hollow ion) states due to electron correlation, and (3) formation of long-lived metastable states in electron transfer processes. During the period of the grant, this research resulted in 23 publications, 12 invited presentations, and 39 contributed presentations at national and international meetings and other institutions. Brief summaries of the completed research are presented below.

  17. Final Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Josef Michl

    2011-10-31

    In this project we have established guidelines for the design on organic chromophores suitable for producing high triplet yields via singlet fission. We have proven their utility by identifying a chromophore of a structural class that had never been examined for singlet fission before, 1,3-diphenylisobenzofuran, and demonstrating in two independent ways that a thin layer of this material produces a triplet yield of 200% within experimental error. We have also designed a second chromophore of a very different type, again of a structural class that had not been examined for singlet fission before, and found that in a thin layer it produces a 70% triplet yield. Finally, we have enhanced the theoretical understanding of the quantum mechanical nature of the singlet fission process.

  18. Final technical report

    DEFF Research Database (Denmark)

    Juhl, Thomas Winther; Nielsen, Jakob Skov

    This project entails research with the goal to extend laser cutting of steel based metals to thickness above 20 mm and laser powers in the 10 kW range, with adequate accuracy and economically viable cutting speeds. The technical approach is to develop mirror based cutting heads with truly coaxial....... Phase 2: Development of mirror based test cutting heads. Phase 3: Test and evaluation of the cutting heads on high power CO2 laser sources in the 6-12 kW power range. The test phase concentrates on cutting steels, applied in the heavy industry. In the first part of the project fundamental studies have...... gas jet chamber and laser beam path from the final focusing mirror. The project consists of three phases: Phase 1: Fundamental studies of cutting front mechanisms, beam propagation, nozzle design and chemical reactions in the cut kerf with special emphasize on high laser powers and thick sections...

  19. Final technical report

    DEFF Research Database (Denmark)

    Juhl, Thomas Winther; Nielsen, Jakob Skov

    . Phase 2: Development of mirror based test cutting heads. Phase 3: Test and evaluation of the cutting heads on high power CO2 laser sources in the 6-12 kW power range. The test phase concentrates on cutting steels, applied in the heavy industry. In the first part of the project fundamental studies have......This project entails research with the goal to extend laser cutting of steel based metals to thickness above 20 mm and laser powers in the 10 kW range, with adequate accuracy and economically viable cutting speeds. The technical approach is to develop mirror based cutting heads with truly coaxial...... gas jet chamber and laser beam path from the final focusing mirror. The project consists of three phases: Phase 1: Fundamental studies of cutting front mechanisms, beam propagation, nozzle design and chemical reactions in the cut kerf with special emphasize on high laser powers and thick sections...

  20. FINAL/ SCIENTIFIC TECHNICAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, Henry; Singh, Suminderpal

    2006-08-28

    The overall objective of the Chattanooga fuel cell demonstrations project was to develop and demonstrate a prototype 5-kW grid-parallel, solid oxide fuel cell (SOFC) system that co-produces hydrogen, based on Ion America’s technology. The commercial viability of the 5kW SOFC system was tested by transporting, installing and commissioning the SOFC system at the Alternative Energy Laboratory at the University of Tennessee – Chattanooga. The system also demonstrated the efficiency and the reliability of the system running on natural gas. This project successfully contributed to the achievement of DOE technology validation milestones from the Technology Validation section of the Hydrogen, Fuel Cells and Infrastructure Technologies Program Multi-Year Research, Development and Demonstration Plan. Results of the project can be found in the final technical report.

  1. DEWPOINT. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Riddle, R.A.

    1994-09-01

    The DEWPOINT (Directed Energy POwer INTegration) program was aimed at providing the large amounts of electric power required for a laser or accelerator based in space, or on an aircraft or satellite platform. This is our final report on our efforts as a part of this program which was cancelled before completion. This report summarizes the entire scope of effort funded by this program. It also includes some related information on cryogenically cooled microchannel heatsinks which was funded internally by LLNL. Specifically, the DEWPOINT program was to provide the electrical power for the proposed Neutral Particle Beam weapon system of the Strategic Defense Initiative. The Neutral Particle Beam called for a space-based accelerator driven by radio frequency power sources. The radio frequency solid-state power amplifiers generate waste heat which must be dissipated.

  2. AIPM Final Report

    Energy Technology Data Exchange (ETDEWEB)

    John Mookken

    2006-06-30

    The final AIPM project report consists of six sections. Each section includes information on the original AIPM project and extension work on the high temperature design. The first section (1) provides an overview of the program and highlights the significant targets to meet at the end of the program. The next section (2) summarizes the significant technical accomplishments by the SEMIKRON AIPM team during the course of the project. Greater technical details are provided in a collection of all the quarterly reports which can be found in the appendix. Section three (3) presents some the more significant technical data collected from technology demonstrators. Section four (4) analyzes the manufacturing cost or economic aspects of producing 100,000 units/yr. Section five (5) describes the commercialization efforts of the AIPM technology into the automotive market. The last section (6) recommends follow on work that will build on the efforts and achievements of the AIPM program.

  3. The PHENIX final texts

    Energy Technology Data Exchange (ETDEWEB)

    Vasile, A.; Fontaine, B.; Vanier, M.; Gauthe, P.; Pascal, V.; Prulhiere, G.; Jaecki, P.; Martin, L. [CEA Cadarache, 13 - Saint Paul lez Durance (France); Tenchine, D. [CEA Grenoble, 38 (France); Sauvage, J.F. [Electricite de France (EDF/SEPTEN), 69 - Villeurbanne (France); Dupraz, R.; Woaye Hune, A. [AREVA NP, 75 - Paris (France)

    2010-11-15

    The 250 MWe (140 MWe since 1993) PHENIX sodium cooled fast reactor was shut down on March 6, 2009. Before decommissioning, a final set of tests was performed during May 2009 - January 2010. These tests covered core physics, fuel behaviour and thermal-hydraulics areas. Detailed analysis of the tests results is ongoing. It will be used for the extension of the validation of ERANOS and DARWIN codes for core physics, TRIO{sub U} and CATHARE for thermal-hydraulics and GERMINAL for fuel behaviour. In addition, the program included 2 tests related to the comprehension of the four negative reactivity transients (AURN) experienced during the reactor operation in 1989 and 1990 and not yet fully explained. This was also a great opportunity to involve young engineers in the different processes like the design of the tests, their carrying out and the analysis of the results. The standard instrumentation of the reactor was completed by specifically designed devices. (authors)

  4. Final cook temperature monitoring

    Science.gov (United States)

    Stewart, John; Matthews, Michael; Glasco, Marc

    2006-04-01

    Fully cooked, ready-to-eat products represent one of the fastest growing markets in the meat and poultry industries. Modern meat cooking facilities typically cook chicken strips and nuggets at rates of 6000 lbs per hour, and it is a critical food safety issue to ensure the products on these lines are indeed fully cooked. Common practice now employs oven technicians to constantly measure final cook temperature with insertion-type thermocouple probes. Prior research has demonstrated that thermal imagery of chicken breasts and other products can be used to predict core temperature of products leaving an oven. In practice, implementation of a system to monitor core temperature can be difficult for several reasons. First, a wide variety of products are typically produced on the same production line and the system must adapt to all products. Second, the products can be often hard to find because they often leave the process in random order and may be touching or even overlapping. Another issue is finite measurement time which is typically only a few seconds. Finally, the system is subjected to a rigorous sanitation cycle and must hold up under wash down conditions. To address these problems, a calibrated 320x240 micro-bolometer camera was used to monitor the temperature of formed, breaded poultry products on a fully cooked production line for a period of one year. The study addressed the installation and operation of the system as well as the development of algorithms used to identify the product on a cluttered conveyor belt. It also compared the oven tech insertion probe measurements to the non-contact monitoring system performance.

  5. FAST v8 Verification and Validation for a Megawatt-Scale Wind Turbine with Aeroelastically Tailored Blades: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Guntur, Sirnivas; Jonkman, Jason; Schreck, Scott; Jonkman, Bonnie; Wang, Qi; Sprague, Michael; Hind, Michael; Sievers, Ryan

    2016-01-27

    This paper presents findings from a verification and validation exercise on the latest version of the U.S. Department of Energy/National Renewable Energy Laboratory's in-house wind turbine aeroelastic design code FAST v8. Results from a set of 1141 FAST simulations were compared to those from Siemens' BHawC design code results, as well as experimental data from a heavily instrumented 2.3-MW Siemens wind turbine located at the National Wind Technology Center. The code validation was performed following the IEC-61400-13 standard, where a set of select quantities of interest from simulations at various wind speed and atmospheric turbulence conditions were used for a three-way comparison between FAST, BHawC, and the measurements. Results highlight many improvements of the latest version of FAST over its previous versions. This paper also provides comments from the authors on the data quality, and avenues for potential future work using these results.

  6. The comparison of CAP88-PC version 2.0 versus CAP88-PC version 1.0

    Energy Technology Data Exchange (ETDEWEB)

    Yakubovich, B.A.; Klee, K.O.; Palmer, C.R.; Spotts, P.B.

    1997-12-01

    40 CFR Part 61 (Subpart H of the NESHAP) requires DOE facilities to use approved sampling procedures, computer models, or other approved procedures when calculating Effective Dose Equivalent (EDE) values to members of the public. Currently version 1.0 of the approved computer model CAP88-PC is used to calculate EDE values. The DOE has upgraded the CAP88-PC software to version 2.0. This version provides simplified data entry, better printing characteristics, the use of a mouse, and other features. The DOE has developed and released version 2.0 for testing and comment. This new software is a WINDOWS based application that offers a new graphical user interface with new utilities for preparing and managing population and weather data, and several new decay chains. The program also allows the user to view results before printing. This document describes a test that confirmed CAP88-PC version 2.0 generates results comparable to the original version of the CAP88-PC program.

  7. SINDA'85/FLUINT - SYSTEMS IMPROVED NUMERICAL DIFFERENCING ANALYZER AND FLUID INTEGRATOR (CONVEX VERSION)

    Science.gov (United States)

    Cullimore, B.

    1994-01-01

    SINDA, the Systems Improved Numerical Differencing Analyzer, is a software system for solving lumped parameter representations of physical problems governed by diffusion-type equations. SINDA was originally designed for analyzing thermal systems represented in electrical analog, lumped parameter form, although its use may be extended to include other classes of physical systems which can be modeled in this form. As a thermal analyzer, SINDA can handle such interrelated phenomena as sublimation, diffuse radiation within enclosures, transport delay effects, and sensitivity analysis. FLUINT, the FLUid INTegrator, is an advanced one-dimensional fluid analysis program that solves arbitrary fluid flow networks. The working fluids can be single phase vapor, single phase liquid, or two phase. The SINDA'85/FLUINT system permits the mutual influences of thermal and fluid problems to be analyzed. The SINDA system consists of a programming language, a preprocessor, and a subroutine library. The SINDA language is designed for working with lumped parameter representations and finite difference solution techniques. The preprocessor accepts programs written in the SINDA language and converts them into standard FORTRAN. The SINDA library consists of a large number of FORTRAN subroutines that perform a variety of commonly needed actions. The use of these subroutines can greatly reduce the programming effort required to solve many problems. A complete run of a SINDA'85/FLUINT model is a four step process. First, the user's desired model is run through the preprocessor which writes out data files for the processor to read and translates the user's program code. Second, the translated code is compiled. The third step requires linking the user's code with the processor library. Finally, the processor is executed. SINDA'85/FLUINT program features include 20,000 nodes, 100,000 conductors, 100 thermal submodels, and 10 fluid submodels. SINDA'85/FLUINT can also model two phase flow

  8. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Aristos Aristidou Natureworks); Robert Kean (NatureWorks); Tom Schechinger (IronHorse Farms, Mat); Stuart Birrell (Iowa State); Jill Euken (Wallace Foundation & Iowa State)

    2007-10-01

    The two main objectives of this project were: 1) to develop and test technologies to harvest, transport, store, and separate corn stover to supply a clean raw material to the bioproducts industry, and 2) engineer fermentation systems to meet performance targets for lactic acid and ethanol manufacturers. Significant progress was made in testing methods to harvest corn stover in a “single pass” harvest mode (collect corn grain and stover at the same time). This is technically feasible on small scale, but additional equipment refinements will be needed to facilitate cost effective harvest on a larger scale. Transportation models were developed, which indicate that at a corn stover yield of 2.8 tons/acre and purchase price of $35/ton stover, it would be unprofitable to transport stover more than about 25 miles; thus suggesting the development of many regional collection centers. Therefore, collection centers should be located within about 30 miles of the farm, to keep transportation costs to an acceptable level. These collection centers could then potentially do some preprocessing (to fractionate or increase bulk density) and/or ship the biomass by rail or barge to the final customers. Wet storage of stover via ensilage was tested, but no clear economic advantages were evident. Wet storage eliminates fire risk, but increases the complexity of component separation and may result in a small loss of carbohydrate content (fermentation potential). A study of possible supplier-producer relationships, concluded that a “quasi-vertical” integration model would be best suited for new bioproducts industries based on stover. In this model, the relationship would involve a multiyear supply contract (processor with purchase guarantees, producer group with supply guarantees). Price will likely be fixed or calculated based on some formula (possibly a cost plus). Initial quality requirements will be specified (but subject to refinement).Producers would invest in harvest

  9. Final Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Hood, Elizabeth E

    2017-03-27

    The purpose of this project was to develop technology that would facilitate production of sugars from agricultural residues to enable biofuels and biobased product manufacturing. Our primary technology is to use genetic engineering to put bacterial and fungal cellulase genes into corn kernels, using the grain as the production system for the enzymes. At the beginning of this DoE funded program, we were producing two cellulases—E1 endocellulase from a bacterium found in a hot spring at Yellowstone National Park, and CBH I exocellulase from a wood rot fungus. Our team developed several new regulatory sequences (promoters) that increased enzyme protein accumulation in two kernel compartments (embryo and endosperm). We were also able to capitalize on the diverse genetics of corn to increase protein accumulation. High oil germplasm in particular was instrumental in this increase. A second task in the program was to produce enzymes and proteins that enhanced the activity of the E1 and CBH I enzymes. Our team produced CBH II, from the same wood rot fungus at a level that enabled highly enhanced deconstruction activity of E1 and CBH I in a synergistic manner. We analyzed an additional protein, expansin from cucumber that was expressed in the maize grain expression system. This protein had been previously shown to enhance cellulase activity (D. Cosgrove, Penn State University), and required a large-scale production platform. Our team showed that the corn production system allows industrial amounts of active expansin to be harvested from the grain. One of the challenges of any new production system is to maximize recovery of active ingredient from the raw materials at a cost compatible with its final use. Our team showed that low pH extraction of grain solubilized the enzymes without contamination of native corn protein and active product could be concentrated through ultrafiltration. The final outcomes of this project were the following: 3 cellulase enzymes and the

  10. 75 FR 16424 - Proposed Information Collection; Comment Request; Census Coverage Measurement Final Housing Unit...

    Science.gov (United States)

    2010-04-01

    ... will be conducted independent of and not influence the 2010 Census operations. CCM will be conducted to... English language version of the Final Housing Unit Followup form and will be used to collect data and to conduct Quality Control for addresses in CCM stateside sample areas. The D- 1340PR is the Spanish...

  11. 78 FR 26058 - Notice of Issuance of Final Determination Concerning Generation II Military Energizer Flashlights

    Science.gov (United States)

    2013-05-03

    ... invisible to the naked eye, but useful for signaling in military situations. The previous versions of the... transformed. See also, 19 C.F.R. Sec. 177.22(a). In rendering advisory rulings and final determinations for... with the Federal Acquisition Regulations. See 19 C.F.R. Sec. 177.21. In this regard, CBP recognizes...

  12. Digital elevation models for site investigation programme in Oskarshamn. Site description version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Brydsten, Lars; Stroemgren, Maarten [Umeaa Univ. (Sweden). Dept. of Biology and Environmental Science

    2005-06-01

    In the Oskarshamn area, a digital elevation model has been produced using elevation data from many elevation sources on both land and sea. Many elevation model users are only interested in elevation models over land, so the model has been designed in three versions: Version 1 describes land surface, lake water surface, and sea bottom. Version 2 describes land surface, sediment levels at lake bottoms, and sea bottoms. Version 3 describes land surface, sediment levels at lake bottoms, and sea surface. In cases where the different sources of data were not in point form 'such as existing elevation models of land or depth lines from nautical charts' they have been converted to point values using GIS software. Because data from some sources often overlaps with data from other sources, several tests were conducted to determine if both sources of data or only one source would be included in the dataset used for the interpolation procedure. The tests resulted in the decision to use only the source judged to be of highest quality for most areas with overlapping data sources. All data were combined into a database of approximately 3.3 million points unevenly spread over an area of about 800 km{sup 2}. The large number of data points made it difficult to construct the model with a single interpolation procedure, the area was divided into 28 sub-models that were processed one by one and finally merged together into one single model. The software ArcGis 8.3 and its extension Geostatistical Analysis were used for the interpolation. The Ordinary Kriging method was used for interpolation. This method allows both a cross validation and a validation before the interpolation is conducted. Cross validation with different Kriging parameters were performed and the model with the most reasonable statistics was chosen. Finally, a validation with the most appropriate Kriging parameters was performed in order to verify that the model fit unmeasured localities. Since both the

  13. Update of the European Landslide Susceptibility Map (ELSUS Version 2)

    Science.gov (United States)

    Wilde, Martina; Günther, Andreas; Malet, Jean-Philippe; Reichenbach, Paola; Hervás, Javier

    2015-04-01

    We present an update of the initial version of the European Landslide Susceptibility Map (ELSUS Version 1) that was released in 2012 through the EU Joint Research Centre (JRC) European Soil Data Centre (ESDAC). The susceptibility evaluation methodology employed for the updated map ELSUS Version 2 presented in this paper is identical to the previous approach, and comprises the differentiation of the analyzed European area into seven climate-physiographical model zones, the use of a reduced set of spatial susceptibility predictors (shallow subsurface lithology, slope angle, and land cover), and model zone-specific heuristic spatial multicriteria evaluations (SMCE) for susceptibility mapping. The most important improvement for ELSUS version 2 is the replacement of the original "lithology" data set consisting of soil parent material information derived from the European Soil Database (ESDB) by new information derived from the digital version of the International Hydrogeological Map of Europe at scale 1 : 1.5 Million (IHME 1500). IHME lithology describes both consolidated and unconsolidated shallow geological materials over Europe and can be shown to have a higher significance for landslide susceptibility evaluation than the soil parent material derived from ESDB. Other improvements consist in the change of the mapping unit from 1 km to 200 m grid size and the incorporation of terrains not covered by ELSUS version 1 (e.g., Iceland, the Faroers, the Shetlands, and Cyprus). Additionally, the new ELSUS version 2 was calibrated and validated with an updated pan-European landslide inventory now containing more than 155,000 landslides (30% more than used for ELSUS version 1). The enhanced and updated landslide inventory and the higher quality of the "lithology" data enabled us to establish more consistent SMCE-schemes for the individual model zones. The enhancements of ELSUS Version 2 result in an overall increase of the predictive power of the map for about 10%, as indicated

  14. MOPAC Manual (Version 3.10) a General Molecular Orbital Package -- IBM-PC Version.

    Science.gov (United States)

    1986-08-20

    DCART DEBUG - DEBUG OPTION TURNED ON DEBUGPULAY PRINT DETAILS OF WORKING IN PULAY DENOUT - DENSITY MATRIX OUTPUT (CHANNEL 10) DENSITY - FINAL DENSITY...This is useful in debugging ITER. DEBUG can also increase the amount of output produced when a key-word is used, e.g. COMPFG. DENOUT The density...occurs during the current run then DENOUT is invoked automatically. (see RESTART) DENSITY At the end of a job, when the results are being printed, the

  15. MOPAC Manual (Version 3.10) A General Molecular Orbital Package -- Cray- XMP Version

    Science.gov (United States)

    1986-06-01

    PRINT DETAILS OF WORKING IN PULAY DENOUT - DENSITY MATRIX OUTPUT (CHANNEL 10) DENSITY - FINAL DENSITY MATRIX TO BE PRINTED DEP - GENERATE...the amount of output produced when a key-word Is used, e.g. COMPFG. - 15 - KEY-MORDS Page 2-8 DENOUT The density matrix at the end of the...then DENOUT Is Invoked automatically, (see RESTART) DENSITY At the end of a job. when the results are being printed, the density matrix Is also

  16. Schedulability Analysis for Java Finalizers

    DEFF Research Database (Denmark)

    Bøgholm, Thomas; Hansen, Rene Rydhof; Søndergaard, Hans

    2010-01-01

    Java finalizers perform clean-up and finalisation of objects at garbage collection time. In real-time Java profiles the use of finalizers is either discouraged (RTSJ, Ravenscar Java) or even disallowed (JSR-302), mainly because of the unpredictability of finalizers and in particular their impact...... on the schedulability analysis. In this paper we show that a controlled scoped memory model results in a structured and predictable execution of finalizers, more reminiscent of C++ destructors than Java finalizers. Furthermore, we incorporate finalizers into a (conservative) schedulability analysis for Predictable Java...... programs. Finally, we extend the SARTS tool for automated schedulability analysis of Java bytecode programs to handle finalizers in a fully automated way....

  17. AIMES Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Katz, Daniel S [Univ. of Illinois, Urbana-Champaign, IL (United States). National Center for Supercomputing Applications (NCSA); Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States); Weissman, Jon [Univ. of Minnesota, Minneapolis, MN (United States); Turilli, Matteo [Rutgers Univ., New Brunswick, NJ (United States)

    2017-01-31

    This is the final technical report for the AIMES project. Many important advances in science and engineering are due to large-scale distributed computing. Notwithstanding this reliance, we are still learning how to design and deploy large-scale production Distributed Computing Infrastructures (DCI). This is evidenced by missing design principles for DCI, and an absence of generally acceptable and usable distributed computing abstractions. The AIMES project was conceived against this backdrop, following on the heels of a comprehensive survey of scientific distributed applications. AIMES laid the foundations to address the tripartite challenge of dynamic resource management, integrating information, and portable and interoperable distributed applications. Four abstractions were defined and implemented: skeleton, resource bundle, pilot, and execution strategy. The four abstractions were implemented into software modules and then aggregated into the AIMES middleware. This middleware successfully integrates information across the application layer (skeletons) and resource layer (Bundles), derives a suitable execution strategy for the given skeleton and enacts its execution by means of pilots on one or more resources, depending on the application requirements, and resource availabilities and capabilities.

  18. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Velasco, Mayda [Northwestern University

    2013-11-01

    This work is focused on the design and construction of novel beam diagnostic and instrumentation for charged particle accelerators required for the next generation of linear colliders. Our main interest is in non-invasive techniques. The Northwestern group of Velasco has been a member of the CLIC Test Facility 3 (CTF3) collaboration since 2003, and the beam instrumentation work is developed mostly at this facility1. This 4 kW electron beam facility has a 25-170 MeV electron LINAC. CTF3 performed a set of dedicated measurements to finalize the development of our RF-Pickup bunch length detectors. The RF-pickup based on mixers was fully commissioned in 2009 and the RF-pickup based on diodes was finished in time for the 2010-11 data taking. The analysis of all the data taken in by the summer of 2010 was finish in time and presented at the main conference of the year, LINAC 2010 in Japan.

  19. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Alexander Fridman

    2005-06-01

    This DOE project DE-FC36-04GO14052 ''Plasma Pilot Plant Test for Treating VOC Emissions from Wood Products Plants'' was conducted by Drexel University in cooperation with Georgia-Pacific (G-P) and Kurchatov Institute (KI). The objective of this project was to test the Plasma Pilot Plant capabilities in wood industry. The final goal of the project was to replace the current state-of-the-art, regenerative thermal oxidation (RTO) technology by Low-Temperature Plasma Technology (LTPT) in paper and wood industry for Volatile Organic Components (VOC) destruction in High Volume Low Concentration (HVLC) vent emissions. MetPro Corporation joined the team as an industrial partner from the environmental control business and a potential leader for commercialization. Concurrent Technology Corporation (CTC) has a separate contract with DOE for this technology evaluation. They prepared questionnaires for comparison of this technology and RTO, and made this comparison. These data are presented in this report along with the description of the technology itself. Experiments with the pilot plant were performed with average plasma power up to 3.6 kW. Different design of the laboratory and pilot plant pulsed coronas, as well as different analytical methods revealed many new peculiarities of the VOC abatement process. The work reported herein describes the experimental results for the VOCs removal efficiency with respect to energy consumption, residence time, water effect and initial concentration.

  20. Final Report to DOE

    Energy Technology Data Exchange (ETDEWEB)

    Ismail Gultepe

    2012-05-15

    This final report summarizes the accomplished goals and provide a list of the publications and presentations made during the project. The goals of the project were accomplished through the various publications submitted to Journals and presentations done at the DOE and international meetings and conferences. The 8 journal articles related to the goals of this project were accepted or submitted. The 23 presentations related to goals of the project were presented at the meetings. There were some minor changes regarding to project goals because of issues encountered during the analysis of the data. For example, a total water probe sensor mounted on the Convair-580 that can be used for defining mixed phase conditions and parameterization, had some problems to estimate magnitude of total water mass, and this resulted in issues providing an accurate parameterization for cloud fraction. Variability related aerosol number concentrations and their composition for direct and indirect effects were studied and published. Results were given to explain aerosol and ice microphysical effects on climate change studies. It is suggested that developed parameterizations should consider the variability in aerosol and ice parameters over the Arctic regions.

  1. MIXMETER - the final steps

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, P.S. [Melverley Consultants Ltd (United Kingdom); Parry, S.J. [Imperial College, London (United Kingdom). Dept. of Chemical Engineering and Chemical Technology; Shires, G.L. [Imperial College, London (United Kingdom). TH Huxley School of Environment

    1999-07-01

    The MIXMETER multiphase flow meter has been in development since 1992 by Imperial College, London, through a project sponsored by the UK Offshore Supplies Office (OSO) and a consortium of oil companies. During the final stage of this development in 1997 a 3 inch (75mm) Production Prototype meter was built by the licensees, Jiskoot Autocontrol Ltd, and has since been tested under The National Engineering Laboratory (NEL) 'Multiflow' programme. Tests in the vertical orientation (upward flow) have also been performed together with heavy oil tests at the Texaco Flow Facility in Humble, Texas. Key aspects of these tests are discussed. An important element of the NEL tests was to assess the performance of the meter when salt concentration of the water phase varies. These results are discussed together with a novel technique for enhancement of the dual energy gamma system to allow salt concentration to be measured and the necessary corrections to be performed without the need for additional equipment. (author)

  2. Voyager Approaches Final Frontier

    Science.gov (United States)

    2003-01-01

    An artist's concept illustrates the positions of the Voyager spacecraft in relation to structures formed around our Sun by the solar wind. Also illustrated is the termination shock, a violent region the spacecraft must pass through before reaching the outer limits of the solar system. At the termination shock, the supersonic solar wind abruptly slows from an average speed of 400 kilometers per second to less than 100 kilometer per second (900,000 to less than 225,000 miles per hour). Beyond the termination shock is the solar system's final frontier, the heliosheath, a vast region where the turbulent and hot solar wind is compressed as it presses outward against the interstellar wind that is beyond the heliopause. A bow shock likely forms as the interstellar wind approaches and is deflected around the heliosphere, forcing it into a teardrop-shaped structure with a long, comet-like tail.The exact location of the termination shock is unknown, and it originally was thought to be closer to the Sun than Voyager 1 currently is. As Voyager 1 cruised ever farther from the Sun, it confirmed that all the planets are inside an immense bubble blown by the solar wind and the termination shock was much more distant.

  3. Omega, the final multiplier

    Science.gov (United States)

    Buckley, T. N.

    2008-12-01

    The application of optimisation theory to vegetation processes has rarely extended beyond the context of diurnal to intra-annual gas exchange of individual leaves and crowns. One reason is that the Lagrange multipliers in the leaf-scale solutions, which are marginal products for allocatable photosynthetic resource inputs (water and nitrogen), are mysterious in origin, and their numerical values are difficult to measure -- let alone to predict or interpret in concrete physiological or ecological terms. These difficulties disappear, however, when the optimisation paradigm itself is extended to encompass carbon allocation and growth at the lifespan scale. The trajectories of leaf (and canopy) level marginal products are then implicit in the trajectory of plant and stand structure predicted by optimal carbon allocation. Furthermore, because the input and product are the same resource -- carbon -- in the whole plant optimisation, the product in one time step defines the input constraint, and hence implicitly the marginal product for carbon, in the next time step. This effectively converts the problem from a constrained optimisation of a definite integral, in which the multipliers are undetermined, to an unconstrained maximisation of a state, in which the multipliers are all implicit. This talk will explore how the marginal products for photosynthetic inputs as well as the marginal product for carbon -- i.e., the 'final multiplier,' omega -- are predicted to vary over time and in relation to environmental change during tree growth.

  4. The Phenix final tests

    Energy Technology Data Exchange (ETDEWEB)

    Vasile, A.; Fontaine, B.; Vanier, M.; Gauthe, P.; Pascal, V.; Prulhiere, G.; Jaecki, P. [CEA Cadarache, BP 1, 13108 St Paul Lez Durance (France); Tenchine, D. [CEA Grenoble (France); Martin, L. [Centrale Phenix - CEA Marcoule (France); Sauvage, J.F. [EDF / SEPTEN - 12 av. Dutrievoz 69628 Villeurbanne (France); Dupraz, R.; Woaye-Hune, A. [AREVA NP - 10 rue Juliette Recamier 69456 LYON Cedex (France)

    2010-07-01

    The 250 MWe (140 MWe since 1993) Phenix sodium cooled fast reactor was shut down on March 6, 2009. Before decommissioning, a final set of tests were performed during the May 2009 - January 2010 period covering core physics, fuel behaviour and thermal-hydraulics areas. Detailed analysis of the tests results is ongoing. It will be used for the extension of the validation of ERANOS and DARWIN codes for core physics, TRIO-U and CATHARE for Thermal-hydraulics and GERMINAL for fuel behaviour. In addition, the program included two tests related to the comprehension of the four negative reactivity transients (AURN in French acronym) experienced during the reactor operation in '89 and '90 and not yet fully explained. This was also a great opportunity to involve young engineers in the different processes like the design of the tests, their carrying out, and the analysis of the results. The standard instrumentation of the reactor was completed by specifically designed devises. (authors)

  5. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Dmitriy Y. Anistratov; Marvin L. Adams; Todd S. Palmer; Kord S. Smith; Kevin Clarno; Hikaru Hiruta; Razvan Nes

    2003-08-04

    OAK B202 Final Technical Report. The present generation of reactor analysis methods uses few-group nodal diffusion approximations to calculate full-core eigenvalues and power distributions. The cross sections, diffusion coefficients, and discontinuity factors (collectively called ''group constants'') in the nodal diffusion equations are parameterized as functions of many variables, ranging from the obvious (temperature, boron concentration, etc.) to the more obscure (spectral index, moderator temperature history, etc.). These group constants, and their variations as functions of the many variables, are calculated by assembly-level transport codes. The current methodology has two main weaknesses that this project addressed. The first weakness is the diffusion approximation in the full-core calculation; this can be significantly inaccurate at interfaces between different assemblies. This project used the nodal diffusion framework to implement nodal quasidiffusion equations, which can capture transport effects to an arbitrary degree of accuracy. The second weakness is in the parameterization of the group constants; current models do not always perform well, especially at interfaces between unlike assemblies. The project developed a theoretical foundation for parameterization and homogenization models and used that theory to devise improved models. The new models were extended to tabulate information that the nodal quasidiffusion equations can use to capture transport effects in full-core calculations.

  6. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Held, Isaac [Princeton Univ., NJ (United States); Balaji, V. [Princeton Univ., NJ (United States); Fueglistaler, Stephan [Princeton Univ., NJ (United States)

    2016-09-19

    We have constructed and analyzed a series of idealized models of tropical convection interacting with large-scale circulations, with 25-50km resolution and with 1-2km cloud resolving resolution to set the stage for rigorous tests of convection closure schemes in high resolution global climate models. Much of the focus has been on the climatology of tropical cyclogenesis in rotating systems and the related problem of the spontaneous aggregation of convection in non-rotating systems. The PI (Held) will be delivering the honorary Bjerknes lecture at the Fall 2016 AGU meeting in December on this work. We have also provided new analyses of long-standing issues related to the interaction between convection and the large-scale circulation: Kelvin waves in the upper troposphere and lower stratosphere, water vapor transport into the stratosphere, and upper tropospheric temperature trends. The results of these analyses help to improve our understanding of processes, and provide tests for future high resolution global modeling. Our final goal of testing new convections schemes in next-generation global atmospheric models at GFDL has been left for future work due to the complexity of the idealized model results meant as tests for these models uncovered in this work and to computational resource limitations. 11 papers have been published with support from this grant, 2 are in review, and another major summary paper is in preparation.

  7. Elaboration of reduced versions of Measurement tools: A practical Perspective

    Directory of Open Access Journals (Sweden)

    Nekane Balluerka

    2012-01-01

    Full Text Available The aim of the present study is to show, from a practical perspective, the guidelines that may be followed to create a reduced version of a measurement tool. Therefore, it describes in detail the process of creating the reduced Basque version of the CDS scale (Children's Depression Scale; Lang and Tisher, 1978, which measures depression in children and adolescents. In a first study, the items that make up the reduced version of the CDS (CDS-R are selected from a set of analysis conducted on a sample of 886 children and adolescents who were administered the extensive version of the CDS adapted to the Basque language (Balluerka, Gorostiaga, and Haranburu, 2012. Subsequently, the CDS-R is validated on a sample of 2,165 participants. This second study examines the factorial structure, the internal consistency and the temporal stability of the instrument, as well as the relationship between its dimensions and gender, academic performance, emotional intelligence and attachment. Thus, evidence is obtained on the reliability and validity of the reduced version of the instrument, which guarantees suitable evaluation of the construct the instrument is intended to measure.

  8. Itil version 3 at a glance information quick reference

    CERN Document Server

    Long, John

    2008-01-01

    ITILA(R) Version 3 At a Glance takes a graphical approach to consolidating the information of ITILA(R) version 3. ITILA(R) is an internationally-recognized set of best practices for providing IT service management. IT organizations worldwide are implementing ITILA(R) as a vehicle for improving IT service quality and improve return on investment for IT services. The desk referencea (TM)s unique graphical approach will take otherwise complex textual descriptions and make the information accessible in a series of consistent, simple diagrams. ITILA(R) Version 3 At a Glance will be of interest to organizations looking to train their staffs in a consistent and cost-effective way. Further, this book is ideal for anyone involved in planning consulting, implementing, or testing an ITILA(R) Version 3 implementation. Each chapter in ITILA(R) Version 3 at a Glance summarizes one of the ITILA(R) v3 books in the following consistent structure: - Brief Description of the Stage - Overview Diagram of the Stage - Key Concepts ...

  9. Validation of the Italian version of the HSE Indicator Tool.

    Science.gov (United States)

    Magnavita, N

    2012-06-01

    An Italian version of the Health & Safety Executive's (HSE) Management Standards Revised Indicator Tool (MS-RIT) has been used to monitor the working conditions that may lead to stress. To initially examine the factor structure of the Italian version of the MS-RIT, in comparison with the original UK tool, and to investigate its validity and reliability; second, to study the association between occupational stress and psychological distress. Workers from 17 companies self-completed the MS-RIT and the General Health Questionnaire used to measure the psychological distress while they waited for their periodic examination at the workplace. Factor analysis was employed to ascertain whether the Italian version maintained the original subdivision into seven scales. Odds ratios were calculated to estimate the risk of impairment associated with exposure to stress at the workplace. In total, 748 workers participated; the response rate was 91%. The factor structure of the Italian MS-RIT corresponded partially to the original UK version. The 'demand', 'control', 'role', ' relationship' and 'colleague-support' scales were equivalent to the UK ones. A principal factor, termed ' elasticity', incorporated the UK 'management-support' and 'change' scales. Reliability analysis of the sub-scales revealed Cronbach's alpha values ranging from 0.75 to 0.86. Our findings confirmed the usefulness of the Italian version of the HSE MS-RIT in stress control.

  10. Del papel a las tablas: el proceso transductivo de Cinco horas con Mario, de Delibes (Novela, versiones, representaciones teatrales

    Directory of Open Access Journals (Sweden)

    Valles Calatrava, José R.

    2004-12-01

    Full Text Available The main objective of this article takes the task of carrying out a comparative analysis between the novel Cinco horas con Mario by Miguel Delibes, two drama script versions written in 1979 and 2001 and finally two theatrical plays based in the previous ones and performed in 1979 and 2003. From a methodological point of view, we first take into consideration the dramatic potential or adaptability of the novel. We then study the text changes implemented to the two drama versions in comparison with novel, as well as the internal similarities and differences. Lastly, we analyze the specifics in communication and performance of the theatrical plays, comparing them to their respective previous written texts.La finalidad de este artículo consiste en realizar un análisis comparativo entre la novela de Miguel Delibes Cinco horas con Mario, sus dos versiones dramáticas realizadas en 1979 y 2001 y dos de las representaciones teatrales basadas en las anteriores y efectuadas en 1979 y 2003. Metodológicamente, se examinan primero las potencialidades teatrales o valores de «adaptabilidad» de la novela; se estudian después las alteraciones textuales generadas con respecto a la obra narrativa por las dos versiones dramáticas, así como sus similitudes y diferencias internas; se acaban analizando por último las especificidades tanto comunicativas como escénicas aportadas por las citadas representaciones teatrales frente a sus distintos antetextos escritos.

  11. Validity and reliability of an adapted Thai version of Scoliosis Research Society-22 questionnaire for adolescent idiopathic scoliosis.

    Science.gov (United States)

    Sathira-Angkura, Vera; Pithankuakul, Kongkit; Sakulpipatana, Susana; Piyaskulkaew, Chaiwat; Kunakornsawat, Sombat

    2012-04-20

    Cross-sectional observational study to investigate psychometric properties of an adapted Thai version of the refined Scoliosis Research Society-22 (SRS-22) questionnaire. To evaluate the reliability and validity of the adapted Thai version of the refined SRS-22 questionnaire. The SRS-22 questionnaire is a valid instrument for assessing the health-related quality of life for patients with adolescent idiopathic scoliosis. Recently, the questionnaire has been translated and validated in many languages for non-English-speaking countries. Translation/retranslation of the English version of the SRS-22 was conducted, and the cross-cultural adaptation process was performed. The Thai version SRS-22 and previously validated Thai version Short-Form survey version 2.0 (SF-36V2) questionnaires were administered to 77 patients with adolescent idiopathic scoliosis who had surgical treatment. Fifty-eight patients (52 adolescent girls) had filled out the first set of questionnaires. Thirty patients of the first-time responders completed the second set of questionnaires. The mean age at the time of operation was 14.6 years and the mean age at the time of the final follow-up was 18.7 years. The mean preoperative scoliosis curve magnitude was 55.4° (range, 30°-95°) and postoperative curve magnitude was 20.1° (range, 0°-60°). Internal consistency was determined with Cronbach α coefficient. Intraclass correlation coefficient was used for test-retest reliability. Concurrent validity was evaluated by comparing SRS-22 domains with relevant domains in the SF-36V2 questionnaire, using the Pearson correlation coefficient. The mean overall Cronbach α coefficient of the adapted Thai version SRS-22 was 0.76. The 2 of corresponding domains (mental health = 0.80 and self-image = 0.83) had satisfactory internal consistency and the remaining domains (pain = 0.78; function/activity = 0.74; and satisfaction = 0.76) were good. The intraclass correlation coefficient for 5 domains was ranged from

  12. Vecinos y Rehabilitation: Assessing the Needs of Indigenous People with Disabilities in Mexico. Final Report [English Version] = Vecinos y Rehabilitation: Evaluacion de las Necesidades de los Indigenas con Discapacidades en Mexico. Reporte Final [Version en Espanol].

    Science.gov (United States)

    Marshall, Catherine A.; And Others

    Available in English and Spanish, this document reports on a survey of the circumstances and needs of disabled indigenous people in Oaxaca state, Mexico. Assisted by a Oaxaca disabilities consumer organization and an advisory committee of government officials, health care educators, community service providers, and indigenous people with…

  13. MTX final report

    Energy Technology Data Exchange (ETDEWEB)

    Hooper, E.B. [ed.; Allen, S.L.; Brown, M.D.; Byers, J.A.; Casper, T.A.; Cohen, B.I.; Cohen, R.H.; Fenstermacher, M.E.; Foote, J.H.; Hoshino, K. [and others

    1994-01-01

    The MTX experiment was proposed in 1986 to apply high frequency microwaves generated by a free-electron laser (FEL) to electron cyclotron resonance heating (ECRH) in a high field, high density tokamak. As the absorption of microwaves at the electron cyclotron resonance requires high frequencies, the opportunity of applying a free-electron laser has appeal as the device is not limited to frequencies in the microwave or long millimeter wavelength regions, in contrast to many other sources. In addition, the FEL is inherently a high power source of microwaves, which would permit single units of 10 MW or more, optimum for reactors. Finally, it was recognized early in the study of the application of the FEL based on the induction linear accelerator, that the nonlinear effects associated with the intense pulses of microwaves naturally generated would offer several unique opportunities to apply ECRH to current drive, MHD control, and other plasma effects. It was consequently decided to adapt the induction accelerator based FEL to heating and controlling the tokamak, and to conduct experiments on the associated physics. To this end, the Alcator C tokamak was moved from the Massachusetts Institute of Technology (MIT) to the Lawrence Livermore National Laboratory where it was installed in Building 431 and operated from March, 1989, until the conclusion of the experiment in October, 1992. The FEL, based on the ETA-11 accelerator and IMP wiggler was brought into operation by the LLNL Electron Beam Group and power injected into the tokamak during an experimental run in the Fall, 1989. Following an upgrade by the MTX group, a second experimental run was made lasting from the Winter, 1992 through the end of the experiment. Significant contributions to the ECRH experiments were made by the Japan Atomic Energy Research Institute (JAERI).

  14. DF-224 Version 7.3 FS Installation

    Science.gov (United States)

    Boyce, Leslye

    1990-12-01

    Version 7.3 will implement a three logical memory unit contingency plan. It removes under utilized DF-224 code to recover memory margins and restructures code. The installation of DF-224, version 7.3 will be broken into a Installation, Regression test, and Contingency Back-out time. In addition, it eliminates the 10 and 300 second processing rate. It is highly desirable to implement the version of the flight software ASAP. Due to the complexity of the installation, dedicated spacecraft time is required to minimize spacecraft risk In summary, this proposal requests 14 orbits of dedicated spacecraft time for installation, regression test, and contingency back_out time for DF-224 FS V7.3 to be scheduled in the first few days of SMS 054.

  15. MR evaluation of femoral neck version and tibial torsion

    Energy Technology Data Exchange (ETDEWEB)

    Koenig, James Karl; Dwek, Jerry R. [University of California, San Diego, Children' s Hospital and Health Center, Department of Radiology, San Diego, CA (United States); Pring, Maya E. [Rady Children' s Hospital, Department of Pediatric Orthopedic Surgery, San Diego, CA (United States)

    2012-01-15

    Abnormalities of femoral neck version have been associated with a number of hip abnormalities in children, including slipped capital femoral epiphysis, proximal femoral focal deficiency, coxa vara, a deep acetabulum and, rarely, developmental dysplasia of the hip. Orthopedic surgeons also are interested in quantifying the femoral neck anteversion or retroversion in children especially to plan derotational osteotomies. Historically, the angle of femoral version and tibial torsion has been measured with the use of radiography and later by CT. Both methods carry with them the risks associated with ionizing radiation. Techniques that utilize MR are used less often because of the associated lengthy imaging times. This article describes a technique using MRI to determine femoral neck version and tibial torsion with total scan times of approximately 10 min. (orig.)

  16. Correction, improvement and model verification of CARE 3, version 3

    Science.gov (United States)

    Rose, D. M.; Manke, J. W.; Altschul, R. E.; Nelson, D. L.

    1987-01-01

    An independent verification of the CARE 3 mathematical model and computer code was conducted and reported in NASA Contractor Report 166096, Review and Verification of CARE 3 Mathematical Model and Code: Interim Report. The study uncovered some implementation errors that were corrected and are reported in this document. The corrected CARE 3 program is called version 4. Thus the document, correction. improvement, and model verification of CARE 3, version 3 was written in April 1984. It is being published now as it has been determined to contain a more accurate representation of CARE 3 than the preceding document of April 1983. This edition supercedes NASA-CR-166122 entitled, 'Correction and Improvement of CARE 3,' version 3, April 1983.

  17. [Validation of the Spanish version of the Severe Impairment Battery].

    Science.gov (United States)

    Llinàs Reglá, J; Lozano Gallego, M; López, O L; Gudayol Portabella, M; López-Pousa, S; Vilalta Franch, J; Saxton, J

    1995-01-01

    We examine the cognitive ability of 58 demented patients who were evaluated with the Spanish version of the Severe Impairment Battery (SIB). The SIB is composed of multiple simple subtests for memory, language, orientation, attention, visual perception and ability to construct. The battery also assesses social skills, praxis and the ability to respond appropriately to name. The mean SIB scores (72.55 +/- 17.99; range 8-99) correlated with mean scores (10.76 +/- 6.41; range 0-31) on the Spanish version of Folstein's Mini-Mental State Examination (MMSE). The SIB detected deterioration in the nine cognitive areas examined, even in the most severely impaired patients (MMSE = 0-6). These results indicate that the Spanish version of the SIB is a useful instrument for examining severely demented patients.

  18. Update on external cephalic version performed at term.

    Science.gov (United States)

    Stine, L E; Phelan, J P; Wallace, R; Eglinton, G S; van Dorsten, J P; Schifrin, B S

    1985-05-01

    External cephalic version under tocolysis at term was investigated during a prospective study at the Los Angeles County/University of Southern California Medical Center from October 1, 1979 to March 16, 1983. Two hundred twelve patients were considered for attempted version. Forty-one patients were excluded, and 23 patients as previously reported were randomized to the control group. The procedure was successful in 73% (108 of 148). Of the 102 successful versions observed until delivery (six lost to follow-up), 93% (95 of 102) presented in labor with a vertex presentation; seven fetuses reverted to abnormal lies. The cesarean section rate in the success group with a vertex presentation was 24% (23 of 95).

  19. Trigonometric version of quantum-classical duality in integrable systems

    CERN Document Server

    Beketov, M; Zabrodin, A; Zotov, A

    2015-01-01

    We extend the quantum-classical duality to the trigonometric (hyperbolic) case. The duality establishes an explicit relationship between the classical N-body trigonometric Ruijsenaars-Schneider model and the inhomogeneous twisted XXZ spin chain on N sites. Similarly to the rational version, the spin chain data fixes a certain Lagrangian submanifold in the phase space of the classical integrable system. The inhomogeneity parameters are equal to the coordinates of particles while the velocities of classical particles are proportional to the eigenvalues of the spin chain Hamiltonians (residues of the properly normalized transfer matrix). In the rational version of the duality, the action variables of the Ruijsenaars-Schneider model are equal to the twist parameters with some multiplicities defined by quantum (occupation) numbers. In contrast to the rational version, in the trigonometric case there is a splitting of the spectrum of action variables (eigenvalues of the classical Lax matrix). The limit correspondin...

  20. The Revised Version of Class I Methanol Maser Catalog

    CERN Document Server

    Val'tts, I E; Bayandina, O S

    2010-01-01

    The revised version of the class I methanol maser catalog is presented. It contains 182 sources - new class I methanol masers detected in the direction of EGOs were added to the previous number (~160 sources have been published in the first version of this catalog - see reference in the text). Electronic version has been generated in the form of html file - http://www.asc.rssi.ru/MMI. A statistical analysis was carried out within 2' around a maser position to find an identification of class I methanol masers with any objects typical for star-forming regions - UCHII regions, IRAS sources, bipolar outflows, CS lines as of dense gas tracer, masers (class II methanol masers, OH and H2O) and EGO. None of the bipolar outflow, already registered in the direction of class I methanol maser, did not coincide with EGO. The result is submitted in a form of a diagram.

  1. An Open Platform for Processing IFC Model Versions

    Institute of Scientific and Technical Information of China (English)

    Mohamed Nour; Karl Beucke

    2008-01-01

    The IFC initiative from the International Alliance of Interoperability has been developing since the mid-nineties through several versions.This paper addresses the problem of binding the growing number of IFC versions and their EXPRESS definitions to programming environments (Java and.NET).The solution developed in this paper automates the process of generating early binding classes,whenever a new version of the IFC model is released.Furthermore, a runtime instantiation of the generated eady binding classes takes place by importing IFC-STEP ISO 10303-P21 models.The user can navigate the IFC STEP model with relevance to the defining EXPRESS-schema,modify,deletem,and create new instances.These func-tionalities are considered to be a basis for any IFC based implementation.It enables researchers to experi-ment the IFC model independently from any software application.

  2. The uncertainty principle - A simplified review of the four versions

    Science.gov (United States)

    Jijnasu, Vasudeva

    2016-08-01

    The complexity of the historical confusions around different versions of the uncertainty principle, in addition to the increasing technicality of physics in general, has made its affairs predominantly accessible only to specialists. Consequently, the clarity that has dawned upon physicists over the decades regarding quantum uncertainty remains mostly imperceptible for general readers, students, philosophers and even non-expert scientists. In an attempt to weaken this barrier, the article presents a summary of this technical subject, focussing at the prime case of the position-momentum pair, as modestly and informatively as possible. This includes a crisp analysis of the historical as well as of the latest developments. In the process the article provides arguments to show that the usually sidelined version of uncertainty-the intrinsic 'unsharpness' or 'indeterminacy'-forms the basis for all the other three versions, and subsequently presents its hard philosophical implications.

  3. [Development of a Japanese version of the TALE scale].

    Science.gov (United States)

    Ochiai, Tsutomu; Oguchi, Takashi

    2013-12-01

    The Thinking About Life Experiences (TALE) Scale (Bluck & Alea, 2011) has three subscales that assess the self, social, and directive functions of autobiographical memory. This study constructs a Japanese version of the TALE Scale and examines its reliability and validity. Fifteen items that assess the three functions of autobiographical memory were translated into Japanese. We conducted an online investigation with 600 men and women between 20-59 years of age. In Study 1, exploratory and confirmatory factor analysis identified that the three-factor structure of the Japanese version of the TALE Scale was the same as the original TALE Scale. Sufficient internal consistency of the scale was found, and the construct validity of the scale was supported by correlation analysis. Study 2 confirmed that the test-retest reliabilities of the three subscales were sufficient. Thus, this Japanese version of the TALE Scale is useful to assess autobiographical memory functions in Japan.

  4. 76 FR 55351 - Artist Canvas from the People's Republic of China: Final Results of the Expedited First Sunset...

    Science.gov (United States)

    2011-09-07

    ... have been primed/coated, whether or not made from cotton, whether or not archival, whether bleached or... woven prepared painting and/or printing surfaces. Artist canvas and stretcher strips (whether or not... order is dispositive. \\1\\ Artist canvases with a non-copyrighted preprinted outline, pattern, or...

  5. Twenty Years On!: Updating the IEA BESTEST Building Thermal Fabric Test Cases for ASHRAE Standard 140: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Judkoff, R.; Neymark, J.

    2013-07-01

    ANSI/ASHRAE Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs applies the IEA BESTEST building thermal fabric test cases and example simulation results originally published in 1995. These software accuracy test cases and their example simulation results, which comprise the first test suite adapted for the initial 2001 version of Standard 140, are approaching their 20th anniversary. In response to the evolution of the state of the art in building thermal fabric modeling since the test cases and example simulation results were developed, work is commencing to update the normative test specification and the informative example results.

  6. Versiones y traducciones de los cuentos de los hermanos Grimm

    OpenAIRE

    Moya Herrera, Sergio

    2015-01-01

    Versiones y traducciones de los cuentos de los hermanos Grimm es un trabajo que pretende investigar el trasfondo de los cuentos de los hermanos Grimm, «Blancanieves», «Cenicienta», «Rapunzel» y «Hansel y Gretel», para entender qué esconden las narraciones. El trabajo incluye un análisis comparativo de dos versiones en alemán de los cuentos, la primera y la última, y también un estudio de dos traducciones al español para conocer cómo se tradujeron varios elementos culturales, nombres de person...

  7. Comparing Danish and Swedish versions of PISA scientific literacy

    DEFF Research Database (Denmark)

    Serder, Malmø University, Margareta; Sørensen, Helene

    This paper presents a comparison between the Swedish, Danish, English, and French versions of three scientific literacy test-units from the released PISA items 2006. More specifically it compares how different words and concepts have been translated in the Swedish and Danish tests, compared...... with these three PISA units. In the paper we claim that in spite of detailed and strongly controlled methods for achieving translations of high standard used by the PISA, important and perhaps even decisive, differences between the four versions exist....

  8. Danish version of 'The COPD self-efficacy scale'

    DEFF Research Database (Denmark)

    Emme, Christina; Mortensen, Erik L; Rydahl-Hansen, Susan

    2012-01-01

    Scand J Caring Sci; 2012; 26; 615-623 Danish version of 'The COPD self-efficacy scale': translation and psychometric properties The aim of the study was to translate 'The COPD self-efficacy scale' (CSES) into Danish and to evaluate the psychometric properties of the Danish version (CSES-DK). CSES...... enables assessment of self-efficacy in individuals with chronic obstructive pulmonary disease (COPD). The scale consists of 34 items, describing situations which may cause dyspnoea in patients with COPD. The CSES was translated into Danish using a standard forward-backward translation procedure...

  9. Development of the unified version of COBRA/RELAP5

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, J. J.; Ha, K. S.; Chung, B. D.; Lee, W. J.; Sim, S. K. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-12-31

    The COBRA/RELAP5 code, an integrated version of the COBRA-TF and RELAP5/MOD3 codes, has been developed for the realistic simulations of complicated, multi-dimensional, two-phase, thermal-hydraulic system transients in light water reactors. Recently, KAERI developed an unified version of the COBRA/RELAP5 code, which can run in serial mode on both workstations and personal computers. This paper provides the brief overview of the code integration scheme, the recent code modifications, the developmental assessments, and the future development plan. 13 refs., 5 figs., 2 tabs. (Author)

  10. SAGE Version 7.0 Algorithm: Application to SAGE II

    Science.gov (United States)

    Damadeo, R. P; Zawodny, J. M.; Thomason, L. W.; Iyer, N.

    2013-01-01

    This paper details the Stratospheric Aerosol and Gas Experiments (SAGE) version 7.0 algorithm and how it is applied to SAGE II. Changes made between the previous (v6.2) and current (v7.0) versions are described and their impacts on the data products explained for both coincident event comparisons and time-series analysis. Users of the data will notice a general improvement in all of the SAGE II data products, which are now in better agreement with more modern data sets (e.g. SAGE III) and more robust for use with trend studies.

  11. Solar Advisor Model User Guide for Version 2.0

    Energy Technology Data Exchange (ETDEWEB)

    Gilman, P.; Blair, N.; Mehos, M.; Christensen, C.; Janzou, S.; Cameron, C.

    2008-08-01

    The Solar Advisor Model (SAM) provides a consistent framework for analyzing and comparing power system costs and performance across the range of solar technologies and markets, from photovoltaic systems for residential and commercial markets to concentrating solar power and large photovoltaic systems for utility markets. This manual describes Version 2.0 of the software, which can model photovoltaic and concentrating solar power technologies for electric applications for several markets. The current version of the Solar Advisor Model does not model solar heating and lighting technologies.

  12. Tinnitus functional index: validation of the German version for Switzerland.

    Science.gov (United States)

    Peter, Nicole; Kleinjung, Tobias; Jeker, Raphael; Meyer, Martin; Klaghofer, Richard; Weidt, Steffi

    2017-05-05

    Different standardized questionnaires are used to assess tinnitus severity, making comparisons across studies difficult. These questionnaires are also used to measure treatment-related changes in tinnitus although they were not designed for this purpose. To solve these problems, a new questionnaire - the Tinnitus Functional Index (TFI) - has been established. The TFI is highly responsive to treatment-related change and promises to be the new gold standard in tinnitus evaluation. The aim of the current study was to validate a German version of the TFI for a German-speaking population in Switzerland. At the ENT department of the University Hospital Zurich, 264 subjects completed an online survey including the German version for Switzerland of TFI, Tinnitus Handicap Inventory (THI), Beck Depression Inventory (BDI), Beck Anxiety Inventory (BAI) and sociodemographic variables. Internal consistency of the TFI was calculated with Cronbach's alpha coefficient. Pearson correlation coefficients were used for the test-retest reliability of the TFI and to investigate convergent and discriminant validity between the THI and the BDI and BAI, respectively. Factor analysis was assessed using a principal component analysis with oblique rotation. The different factors extracted were then compared with the original questionnaire. The German version of the TFI for Switzerland showed an excellent internal consistency (Cronbach's alpha of 0.97) and an excellent test-retest reliability of 0.91. The convergent validity with THI was high (r = 0.86). The discriminant validity with BAI and BDI showed moderate results (BAI: r = 0.60 and BDI: r = 0.65). In the factor analysis only five factors with one main factor could be extracted instead of eight factors as described in the original version. Nevertheless, relations to the original eight subscales could be demonstrated. The German version of the TFI for Switzerland is a suitable instrument for measuring the impact of tinnitus

  13. Comparing Danish and Swedish versions of PISA scientific literacy

    DEFF Research Database (Denmark)

    Serder, Malmø University, Margareta; Sørensen, Helene

    This paper presents a comparison between the Swedish, Danish, English, and French versions of three scientific literacy test-units from the released PISA items 2006. More specifically it compares how different words and concepts have been translated in the Swedish and Danish tests, compared...... to the English and French original versions. Differences that occur as a result of the translation process concerning words’ meaning are demonstrated. The possible consequences of such differences are exemplified by an excerpt from a situation in which Swedish 15-year-old students collaboratively worked...

  14. Versiones y traducciones de los cuentos de los hermanos Grimm

    OpenAIRE

    Moya Herrera, Sergio

    2015-01-01

    Versiones y traducciones de los cuentos de los hermanos Grimm es un trabajo que pretende investigar el trasfondo de los cuentos de los hermanos Grimm, «Blancanieves», «Cenicienta», «Rapunzel» y «Hansel y Gretel», para entender qué esconden las narraciones. El trabajo incluye un análisis comparativo de dos versiones en alemán de los cuentos, la primera y la última, y también un estudio de dos traducciones al español para conocer cómo se tradujeron varios elementos culturales, nombres de person...

  15. Final state interactions in two-particle interferometry

    CERN Document Server

    Anchishkin, D V; Renk, P

    1998-01-01

    We reconsider the influence of two-particle final state interactions (FSI) on two-particle Bose-Einstein interferometry. We concentrate in particular on the problem of particle emission at different times. Assuming chaoticity of the source, we derive a new general expression for the symmetrized two-particle cross section. We discuss the approximations needed to derive from the general result the Koonin-Pratt formula. Introducing a less stringent version of the so-called smoothness approximation we also derive a more accurate formula. It can be implemented into classical event generators and allows to calculate FSI corrected two-particle correlation functions via modified Bose-Einstein "weights".

  16. Photovoltaic Degradation Risk: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, D. C.; Kurtz, S. R.

    2012-04-01

    The ability to accurately predict power delivery over the course of time is of vital importance to the growth of the photovoltaic (PV) industry. Important cost drivers include the efficiency with which sunlight is converted into power, how this relationship changes over time, and the uncertainty in this prediction. An accurate quantification of power decline over time, also known as degradation rate, is essential to all stakeholders - utility companies, integrators, investors, and researchers alike. In this paper we use a statistical approach based on historical data to quantify degradation rates, discern trends and quantify risks related to measurement uncertainties, number of measurements and methodologies.

  17. Ultraviolet Background Radiation (Preprint)

    Science.gov (United States)

    1991-03-01

    importance is that the sky may be truly outstandingly black in the far ultraviolet, offering a "dark site " that is unprecedented in astronomy...Estimated spectral energy distribution of the night-sky background near the zenith at an excellent ground-based site on a moonless night and in a...1977. Ap. J. Suppl. 33:451 31. Henry, R. C. 1981. Ap. J. Lett. 244: L69 32. Henry, R. C. 1981. 16th Rencontre de Moriond, ed. J. Tran Thanh Van, p

  18. ASEDRA Evaluation Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Dean J; Detwiler, Dr. Rebecca; Sjoden, Dr, Glenn E.

    2008-09-01

    The performance of the Advanced Synthetically Enhanced Detector Resolution Algorithm (ASEDRA) was evaluated by performing a blind test of 29 sets of gamma-ray spectra that were provided by DNDO. ASEDRA is a post-processing algorithm developed at the Florida Institute of Nuclear Detection and Security at the University of Florida (UF/FINDS) that extracts char-acteristic peaks in gamma-ray spectra. The QuickID algorithm, also developed at UF/FINDS, was then used to identify nuclides based on the characteristic peaks generated by ASEDRA that are inferred from the spectra. The ASEDRA/QuickID analysis results were evaluated with respect to the performance of the DHSIsotopeID algorithm, which is a mature analysis tool that is part of the Gamma Detector Response and Analysis Software (GADRAS). Data that were used for the blind test were intended to be challenging, and the radiation sources included thick shields around the radioactive materials as well as cargo containing naturally occurring radio-active materials, which masked emission from special nuclear materials and industrial isotopes. Evaluation of the analysis results with respect to the ground truth information (which was provided after the analyses were finalized) showed that neither ASEDRA/QuickID nor GADRAS could identify all of the radiation sources correctly. Overall, the purpose of this effort was primarily to evaluate ASEDRA, and GADRAS was used as a standard against which ASEDRA was compared. Although GADRAS was somewhat more accurate on average, the performance of ASEDRA exceeded that of GADRAS for some of the unknowns. The fact that GADRAS also failed to identify many of the radiation sources attests to the difficulty of analyzing the blind-test data that were used as a basis for the evaluation. This evaluation identified strengths and weaknesses of the two analysis approaches. The importance of good calibration data was also clear because the performance of both analysis methods was impeded by the

  19. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Bohdan W. Oppenheim; Rudolf Marloth

    2007-10-26

    Executive Summary The document contains Final Technical Report on the Industrial Assessment Center Program at Loyola Marymount University in Los Angeles, covering the contract period of 9/1/2002 to 11/30/2006, under the contract DE-FC36-02GO 12073. The Report describes six required program tasks, as follows: TASK 1 is a summary of the assessments performed over the life of the award: 77 assessments were performed, 595 AR were recommended, covering a very broad range of manufacturing plants. TASK 2 is a description of the efforts to promote and increase the adoption of assessment recommendations and employ innovative methods to assist in accomplishing these goals. The LMU IAC has been very successful in accomplishing the program goals, including implemented savings of $5,141,895 in energy, $10,045,411 in productivity and $30,719 in waste, for a total of $15,218,025. This represents 44% of the recommended savings of $34,896,392. TASK 3 is a description of the efforts promoting the IAC Program and enhancing recruitment efforts for new clients and expanded geographic coverage. LMU IAC has been very successful recruiting new clients covering Southern California. Every year, the intended number of clients was recruited. TASK 4 describes the educational opportunities, training, and other related activities for IAC students. A total of 38 students graduated from the program, including 2-3 graduate students every semester, and the remainder undergraduate students, mostly from the Mechanical Engineering Department. The students received formal weekly training in energy (75%) and productivity (25). All students underwent extensive safety training. All students praised the IAC experience very highly. TASK 5 describes the coordination and integration of the Center activities with other Center and IAC Program activities, and DOE programs. LMU IAC worked closely with MIT, and SDSU IAC and SFSU IAC, and enthusiastically supported the SEN activities. TASK 6 describes other tasks

  20. Ocean Model, Analysis and Prediction System version 3: operational global ocean forecasting

    Science.gov (United States)

    Brassington, Gary; Sandery, Paul; Sakov, Pavel; Freeman, Justin; Divakaran, Prasanth; Beckett, Duan

    2017-04-01

    The Ocean Model, Analysis and Prediction System version 3 (OceanMAPSv3) is a near-global (75S-75N; no sea-ice), uniform horizontal resolution (0.1°x0.1°), 51 vertical level ocean forecast system producing daily analyses and 7 day forecasts. This system was declared operational at the Bureau of Meteorology in April 2016 and subsequently upgraded to include ACCESS-G APS2 in June 2016 and finally ported to the Bureau's new supercomputer in Sep 2016. This system realises the original vision of the BLUElink projects (2003-2015) to provide global forecasts of the ocean geostrophic turbulence (eddies and fronts) in support of Naval operations as well as other national services. The analysis system has retained an ensemble-based optimal interpolation method with 144 stationary ensemble members derived from a multi-year hindcast. However, the BODAS code has been upgraded to a new code base ENKF-C. A new strategy for initialisation has been introduced leading to greater retention of analysis increments and reduced shock. The analysis cycle has been optimised for a 3-cycle system with 3 day observation windows retaining an advantage as a multi-cycle time-lagged ensemble. The sea surface temperature and sea surface height anomaly analysis errors in the Australian region are 0.34 degC and 6.2 cm respectively an improvement of 10% and 20% respectively over version 2. In addition, the RMSE of the 7 day forecast has lower error than the 1 day forecast from the previous system (version 2). International intercomparisons have shown that this system is comparable in performance with the two leading systems and is often the leading performer for surface temperature and upper ocean temperature. We present an overview of the system, the data assimilation and initialisation, demonstrate the performance and outline future directions.

  1. Confirmatory Factor Analysis of the French Version of the Anticipatory and Consummatory Interpersonal Pleasure Scale

    Directory of Open Access Journals (Sweden)

    Joséphine Chaix

    2017-07-01

    Full Text Available The Anticipatory and Consummatory Interpersonal Pleasure Scale (ACIPS, a measure specifically designed to assess hedonic capacity for social and interpersonal pleasure, was used to evaluate the presence of social anhedonia in patients as well as the general population. The first goal of this study was to validate the structure of the French version of the ACIPS. The second objective was to verify whether a one, two or three factor solution is most appropriate for the ACIPS scale. The French version of the ACIPS was tested on 263 French-speaking pre-graduate students or professional volunteers. For the confirmatory factor analysis, data were treated as categorical ordinal and all the models were estimated using a robust weighted least squares estimator with adjustments for the mean and variance. Three models were estimated. A one-factor model representing a general undifferentiated “pleasure” latent construct was first tested on the 17 ACIPS items. A two-factor model distinguishing anticipatory-pleasure and consummatory-pleasure was tested next. Finally, a three-factor model including subdomains of intimate social interactions, group social interactions, and social bonding was tested. The one and two-factor models showed a somewhat poor fit to the data. However, the goodness of fit of the three factor model was adequate. These results suggest that individuals who enjoyed interaction in one of these three subdomains were more likely to enjoy doing so in the two other domains. However, on the basis of the comparison between the one and three factor models, these three types of interactions may not be considered as indistinguishable. Rather, they represent distinct and theoretically meaningful dimensions. These results show the French version of the ACIPS is a useful and valid scale to measure the capacity of savoring different kinds of social relationships.

  2. Validation of the Spanish version of the Amsterdam Preoperative Anxiety and Information Scale (APAIS).

    Science.gov (United States)

    Vergara-Romero, Manuel; Morales-Asencio, José Miguel; Morales-Fernández, Angelines; Canca-Sanchez, Jose Carlos; Rivas-Ruiz, Francisco; Reinaldo-Lapuerta, Jose Antonio

    2017-06-07

    Preoperative anxiety is a frequent and challenging problem with deleterious effects on the development of surgical procedures and postoperative outcomes. To prevent and treat preoperative anxiety effectively, the level of anxiety of patients needs to be assessed through valid and reliable measuring instruments. One such measurement tool is the Amsterdam Preoperative Anxiety and Information Scale (APAIS), of which a Spanish version has not been validated yet. To perform a Spanish cultural adaptation and empirical validation of the APAIS for assessing preoperative anxiety in the Spanish population. A two-step forward/back translation of the APAIS scale was performed to ensure a reliable Spanish cultural adaptation. The final Spanish version of the APAIS questionnaire was administered to 529 patients between the ages of 18 to 70 undergoing elective surgery at hospitals of the Agencia Sanitaria Costa del Sol (Spain). Cronbach's alpha, homogeneity index, intra-class correlation coefficient, and confirmatory factor analysis were calculated to assess internal consistency and criteria and construct validity. Confirmatory factor analysis showed that a one-factor model was better fitted than a two-factor model, with good fitting patterns (root mean square error of approximation: 0.05, normed-fit index: 0.99, goodness-of-fit statistic: 0.99). The questionnaire showed high internal consistency (Cronbach's alpha: 0.84) and a good correlation with the Goldberg Anxiety Scale (CCI: 0.62 (95% CI: 0.55 to 0.68). The Spanish version of the APAIS is a valid and reliable preoperative anxiety measurement tool and shows psychometric properties similar to those obtained by similar previous studies.

  3. MinFinder v2.0: An improved version of MinFinder

    Science.gov (United States)

    Tsoulos, Ioannis G.; Lagaris, Isaac E.

    2008-10-01

    and a gradient criterion, is used to decide from which points a local search should be started. Further searching is terminated when all the local minima inside the search domain are thought to be found. This is accomplished via three stopping rules: the "double-box" stopping rule, the "observables" stopping rule and the "expected minimizers" stopping rule. Reasons for the new version: The link procedure for source code in Fortran 77 is enhanced, two additional stopping rules are implemented and a new criterion for accepting-start points, that economizes on function and gradient calls, is introduced. Summary of revisions:Addition of command line parameters to the utility program make_program. Augmentation of the link process for Fortran 77 subprograms, by linking the final executable with the g2c library. Addition of two probabilistic stopping rules. Introduction of a rejection mechanism to the Checking step of the original method, that reduces the number of gradient evaluations. Additional comments: A technical report describing the revisions, experiments and test runs is packaged with the source code. Running time: Depending on the objective function.

  4. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Brizard, Alain J

    2009-12-31

    Final Technical Report for U.S. Department of Energy Grant No. DE-FG02-09ER55005 Nonlinear FLR Effects in Reduced Fluid Models Alain J. Brizard, Saint Michael's College The above-mentioned DoE grant was used to support research activities by the PI during a sabbatical leave from Saint Michael's College in 2009. The major focus of the work was the role played by guiding-center and gyrocenter (linear and nonlinear) polarization and magnetization effects in understanding transport processes in turbulent magnetized plasmas. The theoretical tools used for this work include Lie-transform perturbation methods and Lagrangian (variational) methods developed by the PI in previous work. The present final technical report lists (I) the peer-reviewed publications that were written based on work funded by the Grant; (II) invited and contributed conference presentations during the period funded by the Grant; and (III) seminars presented during the period funded by the Grant. I. Peer-reviewed Publications A.J. Brizard and N. Tronko, 2011, Exact momentum conservation for the gyrokinetic Vlasov- Poisson equations, Physics of Plasmas 18 , 082307:1-14 [http://dx.doi.org/10.1063/1.3625554 ]. J. Decker, Y. Peysson, A.J. Brizard, and F.-X. Duthoit, 2010, Orbit-averaged guiding-center Fokker-Planck operator for numerical applications, Physics of Plasmas 17, 112513:1-12 [http://dx.doi.org/10.1063/1.3519514]. A.J. Brizard, 2010, Noether derivation of exact conservation laws for dissipationless reduced fluid models, Physics of Plasmas 17, 112503:1-8 [http://dx.doi.org/10.1063/1.3515303]. F.-X. Duthoit, A.J. Brizard, Y. Peysson, and J. Decker, 2010, Perturbation analysis of trapped particle dynamics in axisymmetric dipole geometry, Physics of Plasmas 17, 102903:1-9 [http://dx.doi.org/10.1063/1.3486554]. A.J. Brizard, 2010, Exact energy conservation laws for full and truncated nonlinear gyrokinetic equations, Physics of Plasmas 17, 042303:1-11 [http://dx.doi.org/10.1063/1.3374428]. A

  5. Aircraft noise prediction program propeller analysis system IBM-PC version user's manual version 2.0

    Science.gov (United States)

    Nolan, Sandra K.

    1988-01-01

    The IBM-PC version of the Aircraft Noise Prediction Program (ANOPP) Propeller Analysis System (PAS) is a set of computational programs for predicting the aerodynamics, performance, and noise of propellers. The ANOPP-PAS is a subset of a larger version of ANOPP which can be executed on CDC or VAX computers. This manual provides a description of the IBM-PC version of the ANOPP-PAS and its prediction capabilities, and instructions on how to use the system on an IBM-XT or IBM-AT personal computer. Sections within the manual document installation, system design, ANOPP-PAS usage, data entry preprocessors, and ANOPP-PAS functional modules and procedures. Appendices to the manual include a glossary of ANOPP terms and information on error diagnostics and recovery techniques.

  6. Discourse Power and Translator's Style——on a reason behind different styles of two English versions of Hong Lou Meng

    Institute of Scientific and Technical Information of China (English)

    张俊

    2009-01-01

    Style is the core of literary translation whose ultimate destination is the successful conveying of the style of must be their pursue. However, anyone whoever studies the two versions of Hong Lou Meng, must find the striking dif-ference between the Yang's style and that of Hawks'. What caused such differences between versions of the same nov-el? From the perspective of the power of discourse over translator, this study aims to explore one reason molding trans-lator's style and finally finds that, the obvious differences are partly due to the translators' different power of discourse in manipulating the souree text.

  7. Comprehensive Monitoring Program. Final Air Quality Data Assessment Report for 1989, Version 2.1. Volume 3

    Science.gov (United States)

    1990-06-01

    CITY , CO., 11. SUPPLEMENTARY NOTES 12a. DISTRIBUTION /AVAILABILITY STATEMENT 12b. DISTRIBUTION CODE APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS...ROUTINE SEASONAL BASELINE MONITORING OF PM-10, VOC, SVOC, 3P, OTSP, ASBEST , AND METALS 2. "HIGH EVENT" MONITORING DURING SPECIFIED METEOROLOGICAL

  8. Comprehensive Monitoring Program, Final Air Quality Data Assessment Report for 1989, Version 2.1. Volume 4

    Science.gov (United States)

    1990-06-01

    LIMIlD: TSP - Total Suspended Particulates CD - Cadmim ZN - Zinc AS - Arsenic Ck - Chromium RG - mercury PB - Lead CO - Copper N13 - Amonia 3 BASIN F...LIEDM: TSP - Total Suspended Particulates CD - Cadmim ZI - Zinc AS - hreenic CI - ChrovivU HG - Mercury PB - Lead CU - Copper 113 - Amonia I TSP, WIrLS

  9. Comprehensive Monitoring Program: Final Air Quality Data Assessment Report for FY90, Version 3.1 Volume 3

    Science.gov (United States)

    1991-09-01

    Geometric Means by Phase for CMP- Figure 4.2-10 TSF Results for 9/24/88 Figure 4.2- I1 TSP Results for 9/26/90 0 jIjI- xii - i’"AIR-90.’rOC S S * * LIST...northeast during the early hours of the day, then to the east (toward the Arsenal) at midday. Tabla 6.2-1 provides a continuous record of criteria

  10. The effect of building regulations on energy consumption in single-family houses in Denmark. Final version

    Energy Technology Data Exchange (ETDEWEB)

    Hansen Kjaerbye, V. (Roskilde Univ.. Dept. of Environmental, Social and Spatial Change, Roskilde (Denmark)); AKF (Danish Institute of Governmental Research, Copenhagen (Denmark)); Larsen, Anders E. (Roskilde Univ.. Dept. of Society and Globalisation, Roskilde (Denmark)); Togeby, M (Ea Energy Analyses, Copenhagen (Denmark))

    2010-04-15

    This paper explores how changes in regulatory requirements for energy efficiency in buildings (in the US also known as building energy codes) affect household energy consumption. The focus in this paper is on natural gas consumption by Danish single-family owner-occupied houses. Unlike most other papers investigating household energy consumption this paper uses a unique panel data set constructed by merging several administrative data bases. The data set describes house and household characteristics, outdoor temperature and actual metered natural gas consumption over 6 years (1998-2003). Applying advanced econometric methods we examine differences in heating energy consumption due to different building regulation requirements at the time of house construction. As for the effect of the building regulation, we find that changes in Danish building regulations have led to significant reductions in energy used for heating. The latest revision of the Danish building regulation covered by this paper is that of 1998. This revision has resulted in a 7 percent reduction in natural gas consumption. (Author)

  11. OIFITS 2: the 2nd version of the Data Exchange Standard for Optical (Visible/IR) Interferometry

    CERN Document Server

    Duvert, Gilles; Hummel, Christian

    2015-01-01

    This paper describes version 2 of the OI Exchange Format (OIFITS), the standard for exchanging calibrated data from optical (visible/infrared) interferometers. This IAU-endorsed standard has been in use for 10 years at most of the past and current optical interferometer projects, including COAST, NPOI, IOTA, CHARA, VLTI, PTI and the Keck interferometer. Software is available for reading, writing and merging OI Exchange Format files. This version 2 provides definitions of additional data tables (e.g. for polarisation measurements), addressing the needs of future interferometric instruments. Also included are data columns for a more rigorous description of measurement errors and their correlations. In that, this document is a step towards the design of a common data model for optical interferometry. Finally, the main OIFITS header is expanded with several new keywords summarising the content to allow data base searches.

  12. Final Performance Progress Report

    Energy Technology Data Exchange (ETDEWEB)

    Houldin, Joseph [Delaware Valley Industrial Resource Center, Philadelphia, PA (United States); Saboor, Veronica [Delaware Valley Industrial Resource Center, Philadelphia, PA (United States)

    2016-03-30

    about assessing a company’s technical assets, broadening our view of the business to go beyond what they make or what NAICS code they have…to better understand their capacity, capability, and expertise, and to learn more about THEIR customers. Knowing more about the markets they serve can often provide insight into their level of technical knowledge and sophistication. Finally, in the spirit of realizing the intent of the Accelerator we strove to align and integrate the work and activities supported by the five funding agencies to leverage each effort. To that end, we include in the Integrated Work Plan a graphic that illustrates that integration. What follows is our summary report of the project, aggregated from prior reports.

  13. OIFITS 2: the 2nd version of the data exchange standard for optical interferometry

    Science.gov (United States)

    Duvert, Gilles; Young, John; Hummel, Christian A.

    2017-01-01

    This paper describes version 2 of the Optical Interferometry exchange Format (OIFITS), the standard for exchanging calibrated data from optical (visible or infrared) interferometers. This IAU-endorsed standard has been in use for 10 years at most of the past and current optical interferometer projects, including COAST, NPOI, IOTA, CHARA, VLTI, PTI and the Keck interferometer. Software is available for reading, writing and merging OIFITS files. This version 2 provides definitions of additional data tables (for example for polarisation measurements), addressing the needs of future interferometric instruments. Also included are data columns for a more rigorous description of measurement errors and their correlations. In that, this document is a step towards the design of a common data model for optical interferometry. Finally, the main OIFITS header is expanded with several new keywords summarising the content to allow doing data base searches. We request that comments and suggestions related to OIFITS be directed to the OLBIN email list. (See http://www.jmmc.fr/olbin-forum for information on how to subscribe and post to the list.)

  14. Cross-cultural adaptation of the Quality of Life Index Spinal Cord Injury - Version III

    Directory of Open Access Journals (Sweden)

    Priscila Alencar Mendes Reis

    2015-06-01

    Full Text Available OBJECTIVE To translate and culturally adapt to Portuguese the Ferrans and Powers Quality of Life Index Spinal Cord Injury - Version III and characterize the sample in relation to sociodemographic and clinical aspects. METHOD A methodological study with view to cross-cultural adaptation, following the particular steps of this method: initial translation, translation synthesis, back-translation (translation back to the original language, review by a committee of judges and pretest of the final version. The pretest was carried out with 30 patients with spinal cord injury. RESULTS An index of 74 items divided into two parts (satisfaction/importance was obtained. The criteria of semantic equivalence were evaluated as very adequate translation, higher than 87%, and vocabulary and were grammar higher than 86%. Idiomatic equivalence was higher than 74%, experimental greater than 78% and conceptual was greater than 70%. CONCLUSION After cross-cultural adaptation, the instrument proved semantic, idiomatic, experimental and conceptual adequacy, in addition to helping the evaluation of the quality of life of people with spinal cord injury.

  15. A Portuguese version of the student-teacher relationship scale - short form.

    Science.gov (United States)

    Patrício, Joana Nunes; Barata, M Clara; Calheiros, M Manuela; Graça, João

    2015-05-20

    Research consistently demonstrates that positive student-teacher relationships are fundamental to the healthy development of all students. However, we lack a Portuguese-validated measure of student-teacher relationships. In this article we present the adaptation procedures and the psychometric properties of a Portuguese version of the Student-Teacher Relationship Scale - Short Form (Pianta, 1992). Five hundred and thirty five teachers from 127 schools completed the STRS-SF. The results demonstrate that this adapted version of the STRS-SF has good psychometric properties, namely high reliability (α = .84 to .87) and expected construct validity, which were tested through exploratory and confirmatory factor analyses (χ2/df = 1.65, CFI = .96, GFI = .93, RMSEA = 0.05). This study also showed that the correlations of student-teacher relationship with students' demographic variables are consistent with the evidence in the literature about this construct. Finally, the study indicated that female teachers reported more closeness, t(530) = 4.06, p student-teacher relationships, t(530) = 4.90, p < .001. In the discussion, we analyze the implications of these results.

  16. Quantitative version of Kipnis-Varadhan's theorem and Monte-Carlo approximation of homogenized coefficients

    CERN Document Server

    Gloria, Antoine

    2011-01-01

    This article is devoted to the analysis of a Monte-Carlo method to approximate effective coefficients in stochastic homogenization of discrete elliptic equations. We consider the case of independent and identically distributed coefficients, and adopt the point of view of the random walk in a random environment. Given some final time t > 0, a natural approximation of the homogenized coefficients is given by the empirical average of the final squared positions rescaled by t of n independent random walks in n independent environments. Relying on a new quantitative version of Kipnis-Varadhan's theorem (which is of independent interest), we first give a sharp estimate of the error between the homogenized coefficients and the expectation of the rescaled final position of the random walk in terms of t. We then complete the error analysis by quantifying the fluctuations of the empirical average in terms of n and t, and prove a large-deviation estimate. Compared to other numerical strategies, this Monte-Carlo approach...

  17. An Internet Version of the Diagnostic Interview Schedule for Children (DISC-IV) : Correspondence of the ADHD Section With the Paper-and-Pencil Version

    NARCIS (Netherlands)

    Steenhuis, Mark-Peter; Serra, Marike; Minderaa, Rudolf Boudewijn; Hartman, Catharina Annette

    2009-01-01

    The authors recently developed an Internet version of the Diagnostic Interview Schedule for Children-Version 4 (DISC-IV), parent version (D. Shaffer, P. Fisher, C. P. Lucas, M. K. Dulcan, & M. E. Schwab-Stone, 2000), with the main purpose of using it at home without an interviewer. This offers many

  18. The Brazilian version of STarT Back Screening Tool - translation, cross-cultural adaptation and reliability

    Directory of Open Access Journals (Sweden)

    Bruna Pilz

    2014-10-01

    Full Text Available Background: Psychosocial factors are not routinely identified in physical therapy assessments, although they can influence the prognosis of patients with low back pain. The "STarT Back Screening Tool" (SBST questionnaire aids in screening such patients for poor prognosis in the primary care setting and classifies them as high, medium, or low risk based on physical and psychosocial factors. Objectives: This study sought to translate and cross-culturally adapt the SBST to the Brazilian Portuguese language and test the reliability of the Brazilian version. Method: The first stage of the study consisted of the translation, synthesis, and back-translation of the original version of the STSB, including revision by the Translation Group, pretest of the translated version, and assessment by an expert panel. The pre-final Brazilian version was applied to 2 samples comprising 52 patients with low back pain; these patients were of both genders and older than 18 years of age. To assess the instrument's reliability, an additional sample comprising 50 patients was subjected to 2 interviews, and the results were assessed using the quadratic weighted kappa value. The instrument's internal consistency was assessed using Cronbach's alpha (n=105, and the standard error of measurement was also calculated (n=50. Results: Translation and back-translation attained consensus, and only item 6 required changes; the reformulated version was applied to an additional sample comprising 52 individuals who did not report any doubts related to this item. The reliability of the SBST-Brazil was 0.79 (95% confidence interval: 0.63-0.95, the internal consistency was 0.74 for the total score and 0.72 for the psychosocial subscale, and the standard error of measurement was 1.9%. Conclusion: The translated and cross-culturally adapted SBST-Brazil proved to be reliable for screening patients according to their risk of poor prognosis and the presence of psychosocial factors.

  19. International versions of the Menopause Rating Scale (MRS

    Directory of Open Access Journals (Sweden)

    Schneider Hermann PG

    2003-07-01

    Full Text Available Abstract Background Symptom scales for aging women have clinically been used for years and the interest in measuring health-related quality of life (HRQoL has increased in recent years. The Menopause Rating Scale (MRS is a formally validated scale according to the requirements for quality of life instruments. The aim of this paper is to review the current state of the instrument particularly concerning versions of the scale in different languages. MRS versions available The translations were performed following international methodological recommendations for the linguistic & cultural adaptation of HRQoL instruments. The first translation was done from the German original scale into English (UK & USA. The English version was used as the source language for the translations into French, Spanish, Swedish, Mexican/Argentine, Brazilian, Turkish, and Indonesian languages (attached as additional PDF files. Conclusion The MRS scale is obviously a valuable tool for assessing health related quality of life of women in the menopausal transition and is used worldwide. The currently available 9 language versions have been translated following international standards for the linguistic and cultural translation of quality of life scales. Assistance is offered to help interested parties in the translation process.

  20. A Quantum Version of Wigner's Transition State Theory

    NARCIS (Netherlands)

    Schubert, R.; Waalkens, H.; Wiggins, S.

    2009-01-01

    A quantum version of a recent realization of Wigner's transition state theory in phase space is presented. The theory developed builds on a quantum normal form which locally decouples the quantum dynamics near the transition state to any desired order in (h) over bar. This leads to an explicit algor

  1. A Quantum Version of Wigner’s Transition State Theory

    NARCIS (Netherlands)

    Schubert, R.; Waalkens, H.; Wiggins, S.

    2009-01-01

    A quantum version of a recent realization of Wigner’s transition state theory in phase space is presented. The theory developed builds on a quantum normal form which locally decouples the quantum dynamics near the transition state to any desired order in ħ. This leads to an explicit algorithm to com

  2. GOES Surface and Insolation Products (GSIP), Version 2

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Version 2 of the GOES Surface and Insolation Products (GSIP) is a high spatial resolution (1/8 x 1/8 degrees) solar radiation product estimated from the GOES-East...

  3. GENII Version 2 Software Design Document, PNNL-14584, Revision 3

    Energy Technology Data Exchange (ETDEWEB)

    Napier, B. A. [US Environmental Protection Agency (EPA), Washington, DC (United States); Strenge, D. L. [US Environmental Protection Agency (EPA), Washington, DC (United States); Ramsdell, Jr., J. V. [US Environmental Protection Agency (EPA), Washington, DC (United States); Eslinger, P. W. [US Environmental Protection Agency (EPA), Washington, DC (United States); Fosmire, C. [US Environmental Protection Agency (EPA), Washington, DC (United States)

    2009-12-01

    This report describes the mathematical formulations and implementation structure for version 2 of the GENII software product (GENII-V2). The following sections define the purpose and scope of this report, the framework operating structure for GENII-V2, and definitions and acronyms used in this report.

  4. Fraudulent Versions of Botox Found in the United States

    Science.gov (United States)

    ... to U.S. medical practices. The outer carton is counterfeit, while the vial inside is labeled as a foreign version of Botox, which is not FDA-approved for sale in the United States. These products are being sold by unlicensed suppliers who are ...

  5. Accuracy of the Danish version of the 'distress thermometer'

    DEFF Research Database (Denmark)

    Bidstrup, Pernille Envold; Mertz, Birgitte; Dalton, Susanne Oksbjerg

    2012-01-01

    Objective: Short screening instruments have been suggested to improve the detection of psychological symptoms. We examined the accuracy of the Danish version of the 'Distress Thermometer'. Methods: Between October 2008 and October 2009, 426 women with newly diagnosed primary breast cancer who wer...... © 2011 John Wiley & Sons, Ltd....

  6. Rock Visualization System. Technical description (RVS version 3.8)

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, P.; Elfstroem, M.; Markstroem, I. [Golder Associates AB (Sweden)

    2007-06-15

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 4.0. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carry out a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

  7. Rock Visualization System. Technical description (RVS version 3.8)

    Energy Technology Data Exchange (ETDEWEB)

    Curtis, P.; Elfstroem, M.; Markstroem, I. [FB Engineering, Goeteborg (Sweden)

    2005-04-01

    The Rock Visualization System (RVS) has been developed by SKB for use in visualizing geological and engineering data in 3D. The purpose of this report is to provide a technical description of RVS aimed at potential program users and interested parties as well as fulfilling the function of a more general RVS reference that can be cited when writing other technical reports. The report describes RVS version 3.8. Updated versions of this report or addenda will be made available following further development of RVS and the release of subsequent versions of the program. The report covers the following main items: Technical description of the program with illustrations and examples. Limitations of the program and of functionality. For most RVS functions step-by-step tutorials are available describing how a particular function can be used to carryout a specific task. A complete set of updated tutorials is issued with each new version release of the RVS program. However, the tutorials do not cover all the possible uses of all the individual functions but rather give an overall view of their functionality. A detailed description of every RVS function and how it can be used is included in the RVS online Help system.

  8. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (MACINTOSH VERSION)

    Science.gov (United States)

    Rogers, J. L.

    1994-01-01

    effects of an output with respect to a change in a particular input. The second method traces backward to determine what modules must be re-executed if the output of a module must be recomputed. DeMAID is available in three machine versions: a Macintosh version which is written in Symantec's Think C 3.01, a Sun version, and an SGI IRIS version, both of which are written in C language. The Macintosh version requires system software 6.0.2 or later and CLIPS 4.3. The source code for the Macintosh version will not compile under version 4.0 of Think C; however, a sample executable is provided on the distribution media. QuickDraw is required for plotting. The Sun version requires GKS 4.1 graphics libraries, OpenWindows 3, and CLIPS 4.3. The SGI IRIS version requires CLIPS 4.3. Since DeMAID is not compatible with CLIPS 5.0 or later, the source code for CLIPS 4.3 is included on the distribution media; however, the documentation for CLIPS 4.3 is not included in the documentation package for DeMAID. It is available from COSMIC separately as the documentation for MSC-21208. The standard distribution medium for the Macintosh version of DeMAID is a set of four 3.5 inch 800K Macintosh format diskettes. The standard distribution medium for the Sun version of DeMAID is a .25 inch streaming magnetic tape cartridge (QIC-24) in UNIX tar format. The standard distribution medium for the IRIS version is a .25 inch IRIX compatible streaming magnetic tape cartridge in UNIX tar format. All versions include sample input. DeMAID was originally developed for use on VAX VMS computers in 1989. The Macintosh version of DeMAID was released in 1991 and updated in 1992. The Sun version of DeMAID was released in 1992 and updated in 1993. The SGI IRIS version was released in 1993.

  9. DEMAID - A DESIGN MANAGER'S AID FOR INTELLIGENT DECOMPOSITION (SUN VERSION)

    Science.gov (United States)

    Rogers, J. L.

    1994-01-01

    effects of an output with respect to a change in a particular input. The second method traces backward to determine what modules must be re-executed if the output of a module must be recomputed. DeMAID is available in three machine versions: a Macintosh version which is written in Symantec's Think C 3.01, a Sun version, and an SGI IRIS version, both of which are written in C language. The Macintosh version requires system software 6.0.2 or later and CLIPS 4.3. The source code for the Macintosh version will not compile under version 4.0 of Think C; however, a sample executable is provided on the distribution media. QuickDraw is required for plotting. The Sun version requires GKS 4.1 graphics libraries, OpenWindows 3, and CLIPS 4.3. The SGI IRIS version requires CLIPS 4.3. Since DeMAID is not compatible with CLIPS 5.0 or later, the source code for CLIPS 4.3 is included on the distribution media; however, the documentation for CLIPS 4.3 is not included in the documentation package for DeMAID. It is available from COSMIC separately as the documentation for MSC-21208. The standard distribution medium for the Macintosh version of DeMAID is a set of four 3.5 inch 800K Macintosh format diskettes. The standard distribution medium for the Sun version of DeMAID is a .25 inch streaming magnetic tape cartridge (QIC-24) in UNIX tar format. The standard distribution medium for the IRIS version is a .25 inch IRIX compatible streaming magnetic tape cartridge in UNIX tar format. All versions include sample input. DeMAID was originally developed for use on VAX VMS computers in 1989. The Macintosh version of DeMAID was released in 1991 and updated in 1992. The Sun version of DeMAID was released in 1992 and updated in 1993. The SGI IRIS version was released in 1993.

  10. Africa Soil Profiles Database, Version 1.0

    NARCIS (Netherlands)

    Leenaars, J.G.B.

    2014-01-01

    The Africa Soil Profiles Database, Version 1.0, was compiled by ISRIC - World Soil Information as a project activity for the Globally integrated- Africa Soil Information Service (AfSIS) project (www.africasoils.net/data/legacyprofile). The Africa Soil Profiles Database is a compilation of georeferen

  11. A parametrised version of Moser's modifying terms theorem

    NARCIS (Netherlands)

    Wagener, F.

    2009-01-01

    A sharpened version of Moser's `modifying terms' KAM theorem is derived, and it is shown how this theorem can be used to investigate the persistence of invariant tori in general situations, including those where some of the Floquet exponents of the invariant torus may vanish. The result is `structur

  12. A parametrised version of Moser's modifying terms theorem

    NARCIS (Netherlands)

    Wagener, F.

    2010-01-01

    A sharpened version of Moser's 'modifying terms' KAM theorem is derived, and it is shown how this theorem can be used to investigate the persistence of invariant tori in general situations, including those where some of the Floquet exponents of the invariant torus may vanish. The result is 'structur

  13. MULTIPLE PROJECTIONS SYSTEM (MPS): USER'S MANUAL VERSION 2.0

    Science.gov (United States)

    The document is a user's manual for Multiple Projections System (MPS) Version 2.0, based on the 3% reasonable further progress (RFP) tracking system that was developed in FY92/FY93. The 3% RFP tracking system is a Windows application, and enhancements to convert the 3% RFP track...

  14. Psychometric Evaluation of the Simplified Chinese Version of Flourishing Scale

    Science.gov (United States)

    Tang, Xiaoqing; Duan, Wenjie; Wang, Zhizhang; Liu, Tianyuan

    2016-01-01

    Objectives: The Flourishing Scale (FS) was developed to measure psychological well-being from the eudaimonic perspective, highlighting the flourishing of human functioning. This article evaluated the psychometric characteristics of the simplified Chinese version of FS among a Chinese community population. Method: A total of 433 participants from…

  15. Transformation or Transformism: Engestrom's Version of Activity Theory?

    Science.gov (United States)

    Avis, James

    2009-01-01

    The paper examines Engestrom's version of activity theory. It seeks to locate this within the socio-economic and theoretical context in which notions of co-configuration and knotworking are set. Although this theoretical approach offers radical possibilities it is limited by its neglect of the wider social context in which activity systems are…

  16. Requirement analysis and sensor specifications – First version

    NARCIS (Netherlands)

    Sharma, Puneet; Wild, Fridolin; Klemke, Roland; Helin, Kaj; Azam, Tre

    2017-01-01

    In this first version of the deliverable, we make the following contributions: to design the WEKIT capturing platform and the associated experience capturing API, we use a methodology for system engineering that is relevant for different domains such as: aviation, space, and medical and different

  17. A Generalized and Refined Perturbed Version of Ostrowski Type Inequalities

    Directory of Open Access Journals (Sweden)

    M. Z. Sarikaya

    2017-01-01

    Full Text Available In this paper, we first obtain a new identity for twice differentiable mappings. Then, we establish generalized and improved perturbed version of Ostrowski type inequalities for functions whose derivatives are of bounded variation or second derivatives are either bounded or Lipschitzian.

  18. On a discrete version of Tanaka's theorem for maximal functions

    CERN Document Server

    Bober, Jonathan; Hughes, Kevin; Pierce, Lillian B

    2010-01-01

    In this paper we prove a discrete version of Tanaka's Theorem \\cite{Ta} for the Hardy-Littlewood maximal operator in dimension $n=1$, both in the non-centered and centered cases. For the discrete non-centered maximal operator $\\wM $ we prove that, given a function $f: \\Z \\to \\R$ of bounded variation,

  19. On Weakly Singular Versions of Discrete Nonlinear Inequalities and Applications

    Directory of Open Access Journals (Sweden)

    Kelong Cheng

    2014-01-01

    Full Text Available Some new weakly singular versions of discrete nonlinear inequalities are established, which generalize some existing weakly singular inequalities and can be used in the analysis of nonlinear Volterra type difference equations with weakly singular kernels. A few applications to the upper bound and the uniqueness of solutions of nonlinear difference equations are also involved.

  20. HAMLET. LITERATURE CURRICULUM VI, TEACHER AND STUDENT VERSIONS.

    Science.gov (United States)

    KITZHABER, ALBERT R.

    THIS CULMINATING UNIT OF THE 12TH-GRADE OREGON LITERATURE CURRICULUM IS BASED UPON ONE WORK, "HAMLET." THE TEACHER VERSION INCLUDES DISCUSSIONS OF (1) THE RELEVANCE OF HAMLET'S CHARACTER TO MODERN TIMES, (2) THE PROBLEMS IN THE CHARACTERIZATIONS OF THE GHOST, CLAUDIUS, AND HAMLET, (3) THE PLAY'S THREE-PHASE STRUCTURE, (4) THE PLAY'S…

  1. Reliability and Validity of a Turkish Version of the DELES

    Science.gov (United States)

    Ozkok, Alev; Walker, Scott L.; Buyukozturk, Sener

    2009-01-01

    The primary aim of this study was to examine the reliability and validity of a Turkish version of the Distance Education Learning Environment Survey (DELES) in post-secondary distance education. The second aim was to investigate empirically the conceptualisation of the distance education learning environment as a singular latent construct, within…

  2. UPC Language and Library Specifications, Version 1.3

    Energy Technology Data Exchange (ETDEWEB)

    UPC Consortium; Bonachea, Dan; Funck, Gary

    2013-11-16

    UPC is an explicitly parallel extension to the ISO C 99 Standard. UPC follows the partitioned global address space programming model. This document is the formal specification for the UPC language and library syntax and semantics, and supersedes prior specification version 1.2 (LBNL-59208).

  3. IDC Use Case Model Survey Version 1.1.

    Energy Technology Data Exchange (ETDEWEB)

    Harris, James Mark [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Carr, Dorthe B. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2015-02-01

    This document contains the brief descriptions for the actors and use cases contained in the IDC Use Case Model. REVISIONS Version Date Author/Team Revision Description Authorized by V1.0 12/2014 SNL IDC Reengineering Project Team Initial delivery M. Harris V1.1 2/2015 SNL IDC Reengineering Project Team Iteration I2 Review Comments M. Harris

  4. Factor Structure of Japanese Versions of Two Emotional Intelligence Scales

    Science.gov (United States)

    Fukuda, Eriko; Saklofske, Donald H.; Tamaoka, Katsuo; Fung, Tak Shing; Miyaoka, Yayoi; Kiyama, Sachiko

    2011-01-01

    This article reports the psychometric properties of two emotional intelligence measures translated into Japanese. Confirmatory factor analysis (CFA) was conducted to examine the factor structure of a Japanese version of the Wong and Law Emotional Intelligence Scale (WLEIS) completed by 310 Japanese university students. A second study employed CFA…

  5. User's Manual for LEWICE Version 3.2

    Science.gov (United States)

    Wright, William

    2008-01-01

    A research project is underway at NASA Glenn to produce a computer code which can accurately predict ice growth under a wide range of meteorological conditions for any aircraft surface. This report will present a description of the code inputs and outputs from version 3.2 of this software, which is called LEWICE. This version differs from release 2.0 due to the addition of advanced thermal analysis capabilities for de-icing and anti-icing applications using electrothermal heaters or bleed air applications, the addition of automated Navier-Stokes analysis, an empirical model for supercooled large droplets (SLD) and a pneumatic boot option. An extensive effort was also undertaken to compare the results against the database of electrothermal results which have been generated in the NASA Glenn Icing Research Tunnel (IRT) as was performed for the validation effort for version 2.0. This report will primarily describe the features of the software related to the use of the program. Appendix A has been included to list some of the inner workings of the software or the physical models used. This information is also available in the form of several unpublished documents internal to NASA. This report is intended as a replacement for all previous user manuals of LEWICE. In addition to describing the changes and improvements made for this version, information from previous manuals may be duplicated so that the user will not need to consult previous manuals to use this software.

  6. X-ray Photoelectron Spectroscopy Database (Version 4.1)

    Science.gov (United States)

    SRD 20 X-ray Photoelectron Spectroscopy Database (Version 4.1) (Web, free access)   The NIST XPS Database gives access to energies of many photoelectron and Auger-electron spectral lines. The database contains over 22,000 line positions, chemical shifts, doublet splittings, and energy separations of photoelectron and Auger-electron lines.

  7. IDC Use Case Model Survey Version 1.0.

    Energy Technology Data Exchange (ETDEWEB)

    Carr, Dorthe B.; Harris, James M.

    2014-12-01

    This document contains the brief descriptions for the actors and use cases contained in the IDC Use Case Model Survey. REVISIONS Version Date Author/Team Revision Description Authorized by V1.0 12/2014 IDC Re- engineering Project Team Initial delivery M. Harris

  8. New features in McStas, version 1.5

    DEFF Research Database (Denmark)

    Åstrand, P.O.; Lefmann, K.; Farhi, E.

    2002-01-01

    The neutron ray-tracing simulation package McStas has attracted numerous users, and the development of the package continues with version 1.5 released at the ICNS 2001 conference. New features include: support for neutron polarisation, labelling of neutrons, realistic source and sample components...

  9. The Eysenck Personality Questionnaire Brief Version: factor structure and reliability.

    Science.gov (United States)

    Sato, Toru

    2005-11-01

    The short scale of the Eysenck Personality Questionnaire-Revised (EPQR-S; H. J. Eysenck & S. B. G. Eysenck, 1992) is a 48-item personality questionnaire primarily designed to measure an individual's level of extraversion (vs. introversion) and neuroticism. Although L. J. Francis, L. B. Brown, and R. Philipchalk (1992) created the Eysenck Personality Questionnaire Revised-Abbreviated (EPQR-A), an even briefer version of the EPQR-S, the reliability coefficients of some of the measures have been less than satisfactory (S. Forrest, C. A. Lewis, & M. Shevlin, 2000). Because brevity and reliability are both extremely important, the author of the present study created a briefer version of the EPQR-S, more reliable than the EPQR-A, by making slight alterations in the item content as well as the response format of the EPQR-S. Two hundred and sixty eight participants completed the original EPQR-S and the 24-item newly revised briefer version of the EPQR-S (EPQ-BV) twice. The findings revealed that the EPQ-BV has good internal consistency, test-retest reliability, and concurrent validity. A principal component analysis revealed a solution with factor loadings that accurately reflected the primary measures of the EPQR-S. These findings are discussed in relation to the psychometric properties of the EPQR-A and the original version of the EPQR-S.

  10. A Multi-threaded Version of Field II

    DEFF Research Database (Denmark)

    Jensen, Jørgen Arendt

    2014-01-01

    in a plane of 20 x 50 mm (width x depth) with random Gaussian amplitudes were simulated using the command calc scat . Dual Intel Xeon CPU E5-2630 2.60 GHz CPUs were used under Ubuntu Linux 10.02 and Matlab version 2013b. Each CPU holds 6 cores with hyper-threading, corresponding to a total of 24 hyper...

  11. Engestrom's Version of Activity Theory: A Conservative Praxis?

    Science.gov (United States)

    Avis, James

    2007-01-01

    This article examines Engestrom's version of activity theory, one rooted in Marxism. It is argued that whilst this approach holds progressive possibilities, its radicalism is undermined by a restricted conceptualisation of transformation and the marginalisation of a politicised notion of social antagonism. As a consequence, this approach to…

  12. EPEC-O Self-Study - Original Version

    Science.gov (United States)

    The EPEC-O (Education in Palliative and End-of-Life Care for Oncology) Self-Study Original Version is a free comprehensive multimedia curricula for health professionals caring for persons with cancer and their families. The curricula is available as an online Self-Study Section and as a CD-ROM you can order.

  13. NetCDF structure versioning on the ARM program

    Science.gov (United States)

    Macduff, M.; Beus, S.; Ermold, B.; Sivaraman, C.

    2011-12-01

    The DOE ARM program has produced netcdf data for more than 600 instruments (and more than 100 unique types) since 1994. In addition to instrument changes over time, the software processes have gone through several iterations. So, while the data is in a common netcdf format, some significant variability has occurred over time. Processes that use long-time ranges of these data are forced to deal with these unannounced changes and determine their relevance. In 2006 the ARM program adopted a definition for the structure of a netcdf data file. Using this definition, libraries, a database and management tools were developed to create, store, review, use and enforce changes to the structure of the netcdf files. These are stored as discrete versions allowing for clarity and consistency over time. ARM recently completed the migration of most of the active instruments into this new system and has more than 200 versions created. Having these versions is an important tool for communicating and planning data reprocessing and especially for higher order products to use as a reference of known, documented change. This paper discusses the implementation of structure versioning on ARM, the benefits we foresee and its limitations.

  14. Africa Soil Profiles Database, Version 1.0

    NARCIS (Netherlands)

    Leenaars, J.G.B.

    2012-01-01

    The Africa Soil Profiles Database, Version 1.0, was compiled by ISRIC - World Soil Information as a project activity for the Globally integrated- Africa Soil Information Service (AfSIS) project (www.africasoils.net/data/legacyprofile). The Africa Soil Profiles Database is a compilation of georeferen

  15. Validation of the Korean Version of the Scale for Outcomes in Parkinson’s Disease-Autonomic

    Directory of Open Access Journals (Sweden)

    Ji-Young Kim

    2017-01-01

    Full Text Available Objective Autonomic symptoms are commonly observed in patients with Parkinson’s disease (PD and often limit the activities of daily living. The Scale for Outcomes in Parkinson’s disease-Autonomic (SCOPA-AUT was developed to evaluate and quantify autonomic symptoms in PD. The goal of this study was to translate the original SCOPA-AUT, which was written in English, into Korean and to evaluate its reliability and validity for Korean PD patients. Methods For the translation, the following processes were performed: forward translation, backward translation, expert review, pretest of the pre-final version and development of the final Korean version of SCOPA-AUT (K-SCOPA-AUT. In total, 127 patients with PD from 31 movement disorder clinics of university-affiliated hospitals in Korea were enrolled in this study. All patients were assessed using the K-SCOPA-AUT and other motor, non-motor, and quality of life scores. Test-retest reliability for the K-SCOPA-AUT was assessed over a time interval of 10−14 days. Results The internal consistency and reliability of the K-SCOPA-AUT was 0.727 as measured by the mean Cronbach’s α-coefficient. The test-retest correlation reliability was 0.859 by the Guttman split-half coefficient. The total K-SCOPA-AUT score showed a positive correlation with other non-motor symptoms [the Korean version of non-motor symptom scale (K-NMSS], activities of daily living (Unified Parkinson’s Disease Rating Scale part II and quality of life [the Korean version of Parkinson’s Disease Quality of Life 39 (K-PDQ39]. Conclusion The K-SCOPA-AUT had good reliability and validity for the assessment of autonomic dysfunction in Korean PD patients. Autonomic symptom severities were associated with many other motor and non-motor impairments and influenced quality of life.

  16. Validation of the Korean Version of the Scale for Outcomes in Parkinson’s Disease-Autonomic

    Science.gov (United States)

    Kim, Ji-Young; Song, In-Uk; Koh, Seong-Beom; Ahn, Tae-Beom; Kim, Sang Jin; Cheon, Sang-Myung; Cho, Jin Whan; Kim, Yun Joong; Ma, Hyeo-Il; Park, Mee-Young; Baik, Jong Sam; Lee, Phil Hyu; Chung, Sun Ju; Kim, Jong-Min; Kim, Han-Joon; Sung, Young-Hee; Kwon, Do Young; Lee, Jae-Hyeok; Lee, Jee-Young; Kim, Ji Sun; Yun, Ji Young; Kim, Hee Jin; Hong, Jin Young; Kim, Mi-Jung; Youn, Jinyoung; Kim, Ji Seon; Oh, Eung Seok; Yang, Hui-Jun; Yoon, Won Tae; You, Sooyeoun; Kwon, Kyum-Yil; Park, Hyung-Eun; Lee, Su-Yun; Kim, Younsoo; Kim, Hee-Tae; Kim, Joong-Seok

    2017-01-01

    Objective Autonomic symptoms are commonly observed in patients with Parkinson’s disease (PD) and often limit the activities of daily living. The Scale for Outcomes in Parkinson’s disease-Autonomic (SCOPA-AUT) was developed to evaluate and quantify autonomic symptoms in PD. The goal of this study was to translate the original SCOPA-AUT, which was written in English, into Korean and to evaluate its reliability and validity for Korean PD patients. Methods For the translation, the following processes were performed: forward translation, backward translation, expert review, pretest of the pre-final version and development of the final Korean version of SCOPA-AUT (K-SCOPA-AUT). In total, 127 patients with PD from 31 movement disorder clinics of university-affiliated hospitals in Korea were enrolled in this study. All patients were assessed using the K-SCOPA-AUT and other motor, non-motor, and quality of life scores. Test-retest reliability for the K-SCOPA-AUT was assessed over a time interval of 10−14 days. Results The internal consistency and reliability of the K-SCOPA-AUT was 0.727 as measured by the mean Cronbach’s α-coefficient. The test-retest correlation reliability was 0.859 by the Guttman split-half coefficient. The total K-SCOPA-AUT score showed a positive correlation with other non-motor symptoms [the Korean version of non-motor symptom scale (K-NMSS)], activities of daily living (Unified Parkinson’s Disease Rating Scale part II) and quality of life [the Korean version of Parkinson’s Disease Quality of Life 39 (K-PDQ39)]. Conclusion The K-SCOPA-AUT had good reliability and validity for the assessment of autonomic dysfunction in Korean PD patients. Autonomic symptom severities were associated with many other motor and non-motor impairments and influenced quality of life. PMID:28122431

  17. MueLu User's Guid for Trilinos Version 11.12.

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Jonathan Joseph; Prokopenko, Andrey; Wiesner, Tobias A.; Siefert, Christopher; Tuminaro, Raymond S.

    2014-10-01

    This is the official user guide for the M UE L U multigrid library in Trilinos version 11.12. This guide provides an overview of M UE L U , its capabilities, and instructions for new users who want to start using M UE L U with a minimum of effort. Detailed information is given on how to drive M UE L U through its XML interface. Links to more advanced use cases are given. This guide gives information on how to achieve good parallel performance, as well as how to introduce new algorithms. Finally, readers will find a comprehensive listing of available M UE L U options. Any options not documented in this manual should be considered strictly experimental.

  18. Non-linear Vibrations of Deep Cylindrical Shells by the p-Version Finite Element Method

    Directory of Open Access Journals (Sweden)

    Pedro Ribeiro

    2010-01-01

    Full Text Available A p-version shell finite element based on the so-called shallow shell theory is for the first time employed to study vibrations of deep cylindrical shells. The finite element formulation for deep shells is presented and the linear natural frequencies of different shells, with various boundary conditions, are computed. These linear natural frequencies are compared with published results and with results obtained using a commercial software finite element package; good agreement is found. External forces are applied and the displacements in the geometrically non-linear regime computed with the p-model are found to be close to the ones computed using a commercial FE package. In all numerical tests the p-FE model requires far fewer degrees of freedom than the regular FE models. A numerical study on the dynamic behaviour of deep shells is finally carried out.

  19. IMG 4 version of the integrated microbial genomes comparative analysis system

    Energy Technology Data Exchange (ETDEWEB)

    Markowitz, Victor M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Chen, I-Min A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Palaniappan, Krishna [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Chu, Ken [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Szeto, Ernest [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Pillay, Manoj [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Ratner, Anna [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Huang, Jinghua [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Biological Data Management and Technology Center. Computational Research Division; Woyke, Tanja [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Huntemann, Marcel [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Anderson, Iain [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Billis, Konstantinos [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Varghese, Neha [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Mavromatis, Konstantinos [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Pati, Amrita [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Ivanova, Natalia N. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program; Kyrpides, Nikos C. [USDOE Joint Genome Institute (JGI), Walnut Creek, CA (United States). Microbial Genome and Metagenome Program

    2013-10-27

    The Integrated Microbial Genomes (IMG) data warehouse integrates genomes from all three domains of life, as well as plasmids, viruses and genome fragments. IMG provides tools for analyzing and reviewing the structural and functional annotations of genomes in a comparative context. IMG’s data content and analytical capabilities have increased continuously since its first version released in 2005. Since the last report published in the 2012 NAR Database Issue, IMG’s annotation and data integration pipelines have evolved while new tools have been added for recording and analyzing single cell genomes, RNA Seq and biosynthetic cluster data. Finally, different IMG datamarts provide support for the analysis of publicly available genomes (IMG/W: http://img.jgi.doe.gov/w), expert review of genome annotations (IMG/ER: http://img.jgi.doe.gov/er) and teaching and training in the area of microbial genome analysis (IMG/EDU: http://img.jgi.doe.gov/edu).

  20. Statistical properties of a discrete version of the Ornstein-Uhlenbeck process.

    Science.gov (United States)

    Larralde, Hernán

    2004-02-01

    A discrete version of the Ornstein-Uhlenbeck process is discussed which arises from a simple generalization of the master equation of the random walk. The calculation of the statistical properties of the free propagator for this process can be obtained using essentially the same formalism as for simple random walks. These calculations are carried out in some detail for the one-dimensional case. The usual equation for the evolution of the probability distribution of the Ornstein-Uhlenbeck process is recovered in the continuum limit if the jump distribution has a finite variance. However, the discrete process is also well defined for long tailed jump distributions and, thus, can be used to describe a Lèvy walk under the effect of a harmonic potential. Finally, a brief discussion of the generalization of this process to describe random walks in general potentials is presented and briefly compared with results arising from the fractional diffusion approach.