WorldWideScience

Sample records for preparing cut flowers

  1. Preferences of cut flowers consumers

    Directory of Open Access Journals (Sweden)

    Sylwia Kierczyńska

    2010-01-01

    Full Text Available The results of interviews suggest that majority of the cut flowers’ consumers has favourite kind of flower, among which most frequently pointed one was the rose. More than half of the interviewed favour the uniform colour of cut flowers and red colour was the most favourite one. The subtle smell of flowers was the most preferable one but the intensive fragrance was favoured for more consumers than odourless flowers. The data from selected florists’ confirm the information from interviews – in spite of the occasion, roses were the most demanded cut flowers.

  2. Postharvest: Cut flowers and potted plants

    Science.gov (United States)

    In the past fifty years, the cut flower market has changed dramatically, from a local market with growers located on city outskirts, to a global one; flowers and cut foliage sourced from throughout the world are sold as bunches or combined into arrangements and bouquets in the major target markets. ...

  3. 7 CFR 318.13-23 - Cut flowers from Hawaii.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 5 2010-01-01 2010-01-01 false Cut flowers from Hawaii. 318.13-23 Section 318.13-23... SERVICE, DEPARTMENT OF AGRICULTURE STATE OF HAWAII AND TERRITORIES QUARANTINE NOTICES Regulated Articles From Hawaii and the Territories § 318.13-23 Cut flowers from Hawaii. (a) Except for cut blooms and leis...

  4. Respiration rate of gamma irradiation carnation cut flowers

    International Nuclear Information System (INIS)

    Kikuchi, Olivia Kimiko; Wiendl, Frederico Maximiliano; Todoriki, Setsuko; Nakahara, Kazuhiko; Haysahi, Toru

    1996-01-01

    The present paper presents the CO 2 production of the carnation cut flowers gamma-irradiated with a single dose of 750 Gy. The cut flowers were soaked in preservative solutions, containing germicides or germicides plus 2% sucrose. The irradiation did not change the CO 2 production and did not cause any visible flower damage. The sucrose exogenous supply extended the vase-life of both irradiated and non-irradiated carnations. These results indicated that Nora carnation cut flower can be irradiated with 750 Gy without commercial viability loss and that it is possible to use the radiation to disinfect this fresh product. (author)

  5. Water relations and keeping-quality of cut Gerbera flowers

    OpenAIRE

    Meeteren, van, U.

    1980-01-01

    The aim of the present investigation is to study the internal water relations,of ageing Gerbera inflorescences and their consequence on keepingquality of cut inflorescences. As in all parts of this paper, the term "flower" will be used to describe an inflorescence with its supporting stem.A great problem during vase-life of cut Gerbera flowers is ',stem break", a sudden bending of the stem. As described in part 1, this phenomenon was caused by a water shortage in the flower. The water-stress ...

  6. Effects of electron beam irradiation on cut flowers and mites

    International Nuclear Information System (INIS)

    Dohino, Toshiyuki; Tanabe, Kazuo

    1994-01-01

    Two spotted spider mite, Tetranychus urticae KOCH were irradiated with electron beams (2.5MeV) to develop an alternative quarantine treatment for imported cut flowers. The tolerance of eggs increased with age (1-5-day-old). Immature stages (larva-teleiochrysalis) irradiated at 0.4-0.8kGy increased tolerance with their development. Mated mature females irradiated at 0.4kGy or higher did not produce viable eggs, although temporary recovery was observed at 0.2kGy. Adult males were sterilized at 0.4kGy because non-irradiated virgin females mated with yielded female progeny malformed and sterilized. Various effects of electron beam irradiation were observed when nine species of cut flowers were irradiated in 5MeV Dynamitron accelerator. Chrysanthemum and rose were most sensitive among cut flowers. (author)

  7. Effects of irradiation on freshkeeping of rose cut-flower

    International Nuclear Information System (INIS)

    Ding Zengcheng; Li Chuntao; Tang Fei; Xu Hongqing; Shi Dan

    2003-01-01

    Effects of irradiation treatment on the freshkeeping of rose cut-flower were studied. The result showed that respiratory rate, Pro, MDA and colour of rose changed after irradiated with 0, 50, 100, 200 and 300 Gy treatments, and the florescence period was prolonged with 200 and 300 Gy treatments

  8. Tolerance of cut flowers to gamma-radiation

    International Nuclear Information System (INIS)

    Kikuchi, O.K.; Wiendl, F.M.; Arthur, V.

    1999-01-01

    Cut flowers were gamma-irradiated with doses of 0, 200, 400, 600, and 1000 Gy. Dianthuscaryophyllus (Caryophyllaceae), Gypsophila paniculata (Caryophyllaceae), Freesia sp (Iridaceae), Limonium sinuatum Mill. (Plumbaginaceae), L. latifolium Kuntze (Plumbaginaceae), Narcissus tazetta L. (Amaryllidaceae), Helichrysum bracteatum Andr. (Compositae) and Rhodanthe manglesii Lindl (Compositae) were tolerant up to 1000 Gy, without visible negative changes after irradiation and during the vase-life. Callistephus chinensis (Compositae) and Lilium longiflorum Thunb. (Liliaceae) were moderately tolerant, but were modified by high doses. Anthurium sp (Araceae), Strelitzia sp (Musaceae), Matthiola incana R. Br. (Cruciferae), Aechmea distichanta (Bromeliaceae), Consolida ajacis Niew (Ranunculaceae), Ranunculus sp (Ranunculaceae), Dendrobium phalenopsis (Orchidaceae) and Gerbera sp (Compositae) were not tolerant to a dose of 200 Gy. The most adequate flowers to be submitted to irradiation treatment for disinfestation purpose were those of the Caryophillaceae family and those which can be used as dried flowers, such as members of the Rhodanthe, Helichrysum and Limmonium genera. (author)

  9. Current Situation of Turkey’s Cut Flower Production and Trade, Problems and Offered Solutions

    Directory of Open Access Journals (Sweden)

    Nuran Tapkı

    2018-03-01

    Full Text Available Nowadays, cut flower production has become an income-generating activity branch. Global cut flower production area was 609.000 ha in 2014 which was 39% of total indoor plants production area. Primary continents in cut flower production are; Asia, Pacific and America, and primary countries are; USA, Japan, Italy, Holland, Ecuador, Colombia and Kenya. Europe has a 63% of share and American Continent has 29% of share in global cut flower export. The biggest cut flower exporters in the world are; Holland (56%, Colombia (17% and Ecuador (11%, and the biggest cut flower importers are; USA (18%, Germany (15% and Holland (14%. Due to geographical location and climate conditions, Turkey has an advantage in cut flower production. In terms of production area size, cut flowers take a 26% of share among the indoor plants area in Turkey. According to Turkish Statistical Institute (TSI data, total cut flower production area in Turkey was 1.195 ha by 2016, and it has a 68% of share in indoor plants production. Mediterranean region comes first that has a 46% of share in cut flower production area in Turkey with 5.095 da. In terms of production area, İzmir has the largest share (41.25%. Turkey’s indoor plants export volume is 81.5 million USD which is 26th in the world. Among product groups, cut flower has a 34% of share in export with 27.7 million USD, and Holland is the country that Turkey exports cut flower most (19.29%. Among the cut flowers, carnation is produced and exported most in Turkey. Cut flower sector is open for improvement, therefore taking actions towards market demands, and product diversification would be beneficial for the sector improvement.

  10. Labour Management on Contemporary Kenyan Cut Flower Farms

    DEFF Research Database (Denmark)

    Riisgaard, Lone; Gibbon, Peter

    2014-01-01

    This paper describes the labour management system applied since around 2005 on farms accounting for the bulk of the output of the Kenyan cut flower sector, and provides an analysis of the foundations of this system. Using categories drawn from convention theory, this system is characterized...... in terms of specific approaches to hiring, training and promotion; labour retention; work organization and worker deployment; payment systems and supervision, as well as to collective bargaining. In convention theory terms, the combination of approaches identified in Kenya embodies a mixture of ‘industrial...

  11. Effect of growth conditions on post harvest rehydration ability of cut chrysanthemum flowers

    NARCIS (Netherlands)

    Meeteren, van U.; Gelder, van H.; Ieperen, van W.

    2005-01-01

    Different batches of cut chrysanthemum flowers showed substantial variability in restoring their fresh weight after a moderate water loss. Cutting height strongly affected the rehydration ability of cut flowers, and the hydraulic conductance of the stem and its restoration after air aspiration.

  12. Pesticide Residues on Three Cut Flower Species and Potential Exposure of Florists in Belgium

    Directory of Open Access Journals (Sweden)

    Khaoula Toumi

    2016-09-01

    survey that, despite being exposed to high deposits of residues, florists usually do not protect themselves from contact with residues even if they spend several hours handling cut flowers and preparing bouquets (from 2 to 6 h/day, depending on the time of year and/or selling periods daily. Bad habits (eating, drinking, or smoking at work and absence of personal protective equipment of most florists also increase the risk of contact with pesticide residues.

  13. Psidium guajava and Piper betle leaf extracts prolong vase life of cut carnation (Dianthus caryophyllus) flowers.

    Science.gov (United States)

    Rahman, M M; Ahmad, S H; Lgu, K S

    2012-01-01

    The effect of leaf extracts of Psidium guajava and Piper betle on prolonging vase life of cut carnation flowers was studied. "Carola" and "Pallas Orange" carnation flowers, at bud stage, were pulsed 24 hours with a floral preservative. Then, flowers were placed in a vase solution containing sprite and a "germicide" (leaf extracts of P. guajava and P. betle, 8-HQC, or a copper coin). Flowers treated with 8-HQC, copper coin, and leaf extracts had longer vase life, larger flower diameter, and higher rate of water uptake compared to control (tap water). The leaf extracts of P. guajava and P. betle showed highest antibacterial and antifungal activities compared to the other treatments. Both showed similar effects on flower quality as the synthetic germicide, 8-HQC. Therefore, these extracts are likely natural germicides to prolong vase life of cut flowers.

  14. Psidium guajava and Piper betle Leaf Extracts Prolong Vase Life of Cut Carnation (Dianthus caryophyllus Flowers

    Directory of Open Access Journals (Sweden)

    M. M. Rahman

    2012-01-01

    Full Text Available The effect of leaf extracts of Psidium guajava and Piper betle on prolonging vase life of cut carnation flowers was studied. “Carola” and “Pallas Orange” carnation flowers, at bud stage, were pulsed 24 hours with a floral preservative. Then, flowers were placed in a vase solution containing sprite and a “germicide” (leaf extracts of P. guajava and P. betle, 8-HQC, or a copper coin. Flowers treated with 8-HQC, copper coin, and leaf extracts had longer vase life, larger flower diameter, and higher rate of water uptake compared to control (tap water. The leaf extracts of P. guajava and P. betle showed highest antibacterial and antifungal activities compared to the other treatments. Both showed similar effects on flower quality as the synthetic germicide, 8-HQC. Therefore, these extracts are likely natural germicides to prolong vase life of cut flowers.

  15. Psidium guajava and Piper betle Leaf Extracts Prolong Vase Life of Cut Carnation (Dianthus caryophyllus) Flowers

    OpenAIRE

    Rahman, M. M.; Ahmad, S. H.; Lgu, K. S.

    2012-01-01

    The effect of leaf extracts of Psidium guajava and Piper betle on prolonging vase life of cut carnation flowers was studied. “Carola” and “Pallas Orange” carnation flowers, at bud stage, were pulsed 24 hours with a floral preservative. Then, flowers were placed in a vase solution containing sprite and a “germicide” (leaf extracts of P. guajava and P. betle, 8-HQC, or a copper coin). Flowers treated with 8-HQC, copper coin, and leaf extracts had longer vase life, larger flower diameter, and hi...

  16. Leaves Of Cut Rose Flower Convert Exogenously Applied Glucose To Sucrose And Translocate It To Petals

    Directory of Open Access Journals (Sweden)

    Horibe Takanori

    2014-12-01

    Full Text Available To understand the role that the leaves play in the translocation of soluble carbohydrates in cut rose flowers, we first evaluated the effect of leaf removal on flower quality and the sugar content in petals. Cut rose flowers with leaves had higher soluble sugar content in petals compared with cut flower without leaves. Next, we treated cut flowers with radioactive glucose to clarify translocation routes of exogenously applied sugar. There was no significant difference between the specific radioactivity of sucrose and glucose in leaves, but specific radioactivity of sucrose in petals was much higher than that of glucose. These results suggested that most of the exogenously applied glucose first moved to the leaves, where it was converted into sucrose and then the synthesised sucrose was translocated to the petals. Our results showed that the leaves of cut rose flowers play an important role in the metabolism and transportation of exogenously applied soluble carbohydrates toward the petals, thus contributing to sustaining the post-harvest quality.

  17. Processes and xylem anatomical properties involved in rehydration dynamics of cut flowers

    NARCIS (Netherlands)

    Meeteren, van U.; Ieperen, van W.; Nijsse, J.; Scheenen, T.W.J.; As, van H.; Keijzer, C.J.

    2001-01-01

    In cut flowers, which are harvested in air and transported dry, all cut xylem vessels in the basal part of the stem contain air instead of water. These air-emboli initially block water transport at the start of vase life, but usually (partly) disappear during the first hours of vase life, resulting

  18. Cut flowers disinfestation by ionizing radiation, 3: preservative solution treatment of roses

    International Nuclear Information System (INIS)

    Kikuchi, O.K.; Mastro, N.L. del; Wiendl, F.M.

    1995-01-01

    This paper presents the results from laboratorial gamma irradiation processing of some mini-rose varieties, normally traded in Brazil. Rosebuds were irradiated in a Gammacell 220 with a single dose of 900 Gy. As the irradiation can accelerate flowers and leaves senescence and inhibit buds opening, conventional preservative solutions of aluminum or hydroxyquinoline sulfate were administered to the cut flowers. The irradiated buds did not open and the preservative solutions failed to promote opening, although the stems were soaked before and after irradiation. The preservative treated flowers maintained the vigor for a period longer than that for the controls and the irradiated ones. (author). 9 refs, 1 fig

  19. Employment in the Ecuadorian cut-flower industry and the risk of spontaneous abortion

    Directory of Open Access Journals (Sweden)

    Harlow Sioban D

    2009-10-01

    Full Text Available Abstract Background Research on the potentially adverse effects of occupational pesticide exposure on risk of spontaneous abortion (SAB is limited, particularly among female agricultural workers residing in developing countries. Methods Reproductive histories were obtained from 217 Ecuadorian mothers participating in a study focusing on occupational pesticide exposure and children's neurobehavioral development. Only women with 2+ pregnancies were included in this study (n = 153. Gravidity, parity and frequency of SAB were compared between women with and without a history of working in the cut-flower industry in the previous 6 years. Logistic regression analysis was conducted to assess the relation between SAB and employment in the flower industry adjusting for maternal age. Results In comparison to women not working in the flower industry, women working in the flower industry were significantly younger (27 versus 32 years and of lower gravidity (3.3 versus 4.5 and reported more pregnancy losses. A 2.6 (95% CI: 1.03-6.7 fold increase in the odds of pregnancy loss among exposed women was observed after adjusting for age. Odds of reporting an SAB increased with duration of flower employment, increasing to 3.4 (95% CI: 1.3, 8.8 among women working 4 to 6 years in the flower industry compared to women who did not work in the flower industry. Conclusion This exploratory analysis suggests a potential adverse association between employment in the cut-flower industry and SAB. Study limitations include the absence of a temporal relation between exposure and SAB, no quantification of specific pesticides, and residual confounding such as physical stressors (i.e., standing. Considering that approximately half of the Ecuadorian flower laborers are women, our results emphasize the need for an evaluating the reproductive health effects of employment in the flower industry on reproductive health in this population.

  20. Effect of Various Management Methods of Apical Flower Bud on Cut Flower Quality in Three Cultivars of Greenhouse Roses

    Directory of Open Access Journals (Sweden)

    mansour matloobi

    2017-02-01

    Full Text Available Introduction: In greenhouse roses, canopy management has been highly noted and emphasized during the past decades. It was recognized that improving canopy shape by implementing some techniques such as stem bending and flower bud removing can highly affect the marketable quality of cut roses. For most growers, the best method of flower bud treatment has not yet been described and determined physiologically. This experiment was designed to answer some questions related to this problem. Materials and Methods: A plastic commercial cut rose greenhouse was selected to carry out the trial. Three greenhouse rose cultivars, namely Eros, Cherry Brandy and Dancing Queen, were selected as the first factor, and three methods of flower bud treatment along with bending types were chosen as the second factor. Cuttings were taken from mother plants and rooted under mist conditions. The first shoot emerging from the cutting was treated at pea bud stage by one of the following methods: shoot bending at stem base with intact bud, immediate shoot bending at stem base after removing flower bud and shoot bending at stem base two weeks after flower bud removal. Some marketable stem properties including stem length, diameter and weight, and characteristics related to bud growth potential were measured, and then the data were subjected to statistical analysis. Results and Discussion: Analysis of variance showed that cultivars differ in their marketable features. Cherry Brandy produced longer cut flowers with higher stem diameter compared to the two other cultivars. This cultivar was also good in stem weight trait; however its difference from Eros was not significant. Dancing Queen did not perform well in producing high quality stems on the whole. Regarding number of days until bud release and growth, Cherry Brandy’s buds spent fewest days until growing. In many studies, the effect of cultivar on rose shoot growth quality has been documented and explained. For instance

  1. Effect of Various Management Methods of Apical Flower Bud on Cut Flower Quality in Three Cultivars of Greenhouse Roses

    Directory of Open Access Journals (Sweden)

    mansour matloobi

    2017-09-01

    Full Text Available Introduction: In greenhouse roses, canopy management has been highly noted and emphasized during the past decades. It was recognized that improving canopy shape by implementing some techniques such as stem bending and flower bud removing can highly affect the marketable quality of cut roses. For most growers, the best method of flower bud treatment has not yet been described and determined physiologically. This experiment was designed to answer some questions related to this problem. Materials and Methods: A plastic commercial cut rose greenhouse was selected to carry out the trial. Three greenhouse rose cultivars, namely Eros, Cherry Brandy and Dancing Queen, were selected as the first factor, and three methods of flower bud treatment along with bending types were chosen as the second factor. Cuttings were taken from mother plants and rooted under mist conditions. The first shoot emerging from the cutting was treated at pea bud stage by one of the following methods: shoot bending at stem base with intact bud, immediate shoot bending at stem base after removing flower bud and shoot bending at stem base two weeks after flower bud removal. Some marketable stem properties including stem length, diameter and weight, and characteristics related to bud growth potential were measured, and then the data were subjected to statistical analysis. Results and Discussion: Analysis of variance showed that cultivars differ in their marketable features. Cherry Brandy produced longer cut flowers with higher stem diameter compared to the two other cultivars. This cultivar was also good in stem weight trait; however its difference from Eros was not significant. Dancing Queen did not perform well in producing high quality stems on the whole. Regarding number of days until bud release and growth, Cherry Brandy’s buds spent fewest days until growing. In many studies, the effect of cultivar on rose shoot growth quality has been documented and explained. For instance

  2. Governance of agro-pesticide through private environmental and social standards in the global cut flower chain from Ethiopia

    NARCIS (Netherlands)

    Mengistie, B.T.; Mol, A.P.J.; Oosterveer, P.J.M.

    2017-01-01

    The international cut flower industry is strongly criticized because of its environmental impacts and unsafe working conditions. Increasing certification of cut flowers is used to improve the growers’ environmental and social performance. But what is the impact of this private governance instrument

  3. Mitigating the Water Footprint of Export Cut Flowers from the Lake Naivasha Basin, Kenya

    NARCIS (Netherlands)

    Mekonnen, Mesfin; Hoekstra, Arjen Ysbert; Becht, R.

    2012-01-01

    Kenya’s cut-flower industry has been praised as an economic success as it contributed an annual average of US$ 141 million foreign exchange (7% of Kenyan export value) over the period 1996–2005 and about US$ 352 million in 2005 alone. The industry also provides employment, income and infrastructure

  4. Post harvest controlling of orchid thrips on cut flowers by irradiation

    International Nuclear Information System (INIS)

    Bansiddhi, K.; Siriphontangmun, S.

    1999-01-01

    Post-harvest controlling of orchid thrips, Thrips palmi Karny on cut flowers by irradiation was conducted during October 1992 to September 1997 at the Thai Irradiation Centre (TIC) and Division of Entomology and Zoology, Department of Agriculture, Thailand. The studies were carried out by conducting experiments on irradiation of cut flowers for controlling thrips with doses ranging from 0.1 to 1 kGy. The vase-life of radiated cut flowers was evaluated. Colonies of thrips were established in the laboratory in order to determine radiation sensitivity of various development stages of thrips and also to assess the occurrence of natural infestations by examining commercial market quality flowers from growers where management practices can be identified. Results from five years of research on post harvest control of thrips on orchids and cut flowers by irradiation showed that despite intensive investigation, difficulty in permanent establishment of a laboratory colony of Thrips palmi Karny for bioassays continued. The snap bean rearing method for rearing large number of thrips has bean developed, although it is less satisfactory than desirable. It has given sufficient numbers for testing in the 6th experiment. The maximum dose tolerated by Dendrobium orchid flowers at ambient temperature (25-30 deg. C) was below 0.5 kGy, but at a pre- and post irradiation temperature 15-18 deg. C, the maximum dose tolerated approached 0.75-0.8 kGy. The effective dose for control Thrips palmi Karny, however, was higher than 0.75 kGy. (author)

  5. Integrating drivers influencing the detection of plant pests carried in the international cut flower trade.

    Science.gov (United States)

    Areal, F J; Touza, J; MacLeod, A; Dehnen-Schmutz, K; Perrings, C; Palmieri, M G; Spence, N J

    2008-12-01

    This paper analyses the cut flower market as an example of an invasion pathway along which species of non-indigenous plant pests can travel to reach new areas. The paper examines the probability of pest detection by assessing information on pest detection and detection effort associated with the import of cut flowers. We test the link between the probability of plant pest arrivals, as a precursor to potential invasion, and volume of traded flowers using count data regression models. The analysis is applied to the UK import of specific genera of cut flowers from Kenya between 1996 and 2004. There is a link between pest detection and the Genus of cut flower imported. Hence, pest detection efforts should focus on identifying and targeting those imported plants with a high risk of carrying pest species. For most of the plants studied, efforts allocated to inspection have a significant influence on the probability of pest detection. However, by better targeting inspection efforts, it is shown that plant inspection effort could be reduced without increasing the risk of pest entry. Similarly, for most of the plants analysed, an increase in volume traded will not necessarily lead to an increase in the number of pests entering the UK. For some species, such as Carthamus and Veronica, the volume of flowers traded has a significant and positive impact on the likelihood of pest detection. We conclude that analysis at the rank of plant Genus is important both to understand the effectiveness of plant pest detection efforts and consequently to manage the risk of introduction of non-indigenous species.

  6. Characteristics of pendent heliconia for use in landscape and as cut flower

    Directory of Open Access Journals (Sweden)

    Vivian Loges

    2016-10-01

    Full Text Available The Heliconia species with pendent inflorescences and colorful bracts is a good option for landscaping in tropical gardens and cut flowers market. In Brazil only a few species of Heliconia are commercially produced eg. H. rostrata, H. rauliniana and H. chartacea. Aiming to increase the use of outstanding native plants and the knowledge of these products for enthusiasts of tropical flowers, this work was carried out to characterize H. chartacea, H. collinsiana, H. magnifica, H. pendula, H. platystachys, H. pogonantha, H. rostrata, H. rauliniana and H. vellerigera for use in landscaping and as cut flower. The evaluations were performed on plants belonging to the Germplasm Collection of the Instituto Agronômico (IAC, in Ubatuba Unit of Research and Development, located in Ubatuba, São Paulo State, growing in partial shade conditions. Qualitative and quantitative characteristics related to clump and flower stem aspects were analyzed. A point scoring system was used to determine the species most suitable as landscape plant or as cut flower. The plant height range from 2.3 (H. rostrata to 7.0 m (H. pogonantha, having inflorescence with vibrant and different colors, varying between yellow, orange, red, pink, green and two color combinations. The inflorescences from most of the species were visible in the clump and remain in good conditions for two (H. platystachys to five months (H. magnifica, H. rostrata and H. pogonantha and present six (H. platystachys and H. pendula to 40 (H. pogonantha open bracts. White wax in leaves or inflorescences were observed in H. collinsiana, H. chartacea, H. pendula and H. platystachys. On the other hand, H. magnifica, H. rostrata, H. pogonantha and H. vellerigera exhibit a hairy surface, pubescent to lanuginose. The postharvest durability longer than 10 days was observed only in H. platystachys, H. rostrata, H. chartacea, and H. rauliniana. This characterization and scoring system were important to indicate and

  7. Influence of vernalization and bulb size on the production of lily cut flowers and lily bulbs

    Directory of Open Access Journals (Sweden)

    Diogo Brito de Almeida

    2017-08-01

    Full Text Available Exposure of bulbs to cold, a physiological phenomenon called vernalization, and bulb size are important factors in the production of lily bulbs and flowers. This study aimed to verify the influence of vernalization of bulbs on flowering cut lily plants, as well as the impact of size and shape of harvest on the production and quality of flowers and bulbs. In turn, the way the stems of the plants used for cut-flower production are cropped is of higher importance for the production of new flower bulbs. In this sense, the experiment was conducted in Viçosa, MG, in a greenhouse in a randomized block design, in split splot scheme with three replications, in which the vernalization periods (25, 35 and 45 days at 4 ± 1 C constituted the plots; bulb sizes (diameters of 3.2-3.8 cm; 2.5-3.2 cm 1.9- and 2.5 cm, subplots and ways to harvest (full harvest of the stem at the required length for the commercial harvest of the flower, commercial stem harvest at the commercial length, maintaining 10cm of stem in the soil; removal of the floral buds as soon as their appearance is observed and harvest at the end of the season, the sub subplots. The bulbs were planted in beds, with 15 x 20 cm spacing. It was evaluated the number of plants that flowered and the number of flowers, the length and the diameter of the floral buds, fresh and dry weights, diameter and plant height as well as number, perimeter and amount of fresh and dry bulbs. There was a decrease in the plant height with the increase of the vernalization period and a reduction of the diameter of the planted bulbs, as well as of the number and the fresh and dry weights of the produced buds. The production of flowers and buds in number, size and weight was directly proportional to the size of the planted bulbs, while the form of harvest with removal of flower buds increased the number, the perimeter and the fresh and dry weights of the buds. Bulbs with diameter between 3.2 - 3.8 cm, stored for 25 days in

  8. Growth and Flowering Responses of Cut Chrysanthemum Grown under Restricted Root Volume to Irrigation Frequency

    Directory of Open Access Journals (Sweden)

    Viyachai Taweesak

    2014-01-01

    Full Text Available Influences of irrigation frequency on the growth and flowering of chrysanthemum grown under restricted root volume were tested. Chrysanthemum cuttings (Chrysanthemum morifolium “Reagan White” were grown in seedling tray which contained coconut peat in volumes of 73 and 140 cm3. Plants were irrigated with drip irrigation at irrigation frequencies of 4 (266 mL, 6 (400 mL, and 8 (533 mL times/day to observe their growth and flowering performances. There was interaction between irrigation frequency and substrate volume on plant height of chrysanthemum. Plants grown in 140 cm3 substrates and irrigated 6 times/day produced the tallest plant of 109.25 cm. Plants irrigated 6 and 8 times/day had significantly higher level of phosphorus content in their leaves than those plants irrigated 4 times/day. The total leaf area, number of internodes, leaf length, and leaf width of chrysanthemums grown in 140 cm3 substrate were significantly higher than those grown in 73 cm3 substrate. The numbers of flowers were affected by both irrigation frequencies and substrate volumes. Chrysanthemums irrigated 8 times/day had an average of 19.56 flowers while those irrigated 4 times/day had an average of 16.63 flowers. Increasing irrigation frequency can improve the growth and flowering of chrysanthemums in small substrate volumes.

  9. Governance of agro-pesticide through private environmental and social standards in the global cut flower chain from Ethiopia.

    Science.gov (United States)

    Mengistie, Belay T; Mol, Arthur P J; Oosterveer, Peter

    2017-11-01

    The international cut flower industry is strongly criticized because of its environmental impacts and unsafe working conditions. Increasing certification of cut flowers is used to improve the growers' environmental and social performance. But what is the impact of this private governance instrument on regulating the use of pesticides? This paper assesses the potential of private certification on governing the environmental and social problems from pesticide use along the global cut flower supply chain. We use detailed farm-level data to analyse the environmental and social impacts of flower certification in Ethiopia by comparing different national and international certification schemes. Our analysis does not show significant differences between these different private standards for most environmental and health and safety variables. The Ethiopian cut flower industry remains far from improving its sustainability performance through private certification. However, certification schemes may enable farmers to have access to international markets and keep up their reputation.

  10. Vase-life of Gerbera jamesonii Bolus cut flowers depending upon; media, mineral nutrition, their morphological attributes and treatment with flower preservative

    Directory of Open Access Journals (Sweden)

    R. M. Rudnicki

    2015-06-01

    Full Text Available The correlations among different media, mineral nutrition and morphological features of gerbera flowers in relation to their vase-life period investigated. The bast medium for longevity of cut gerbera flowers was the mixture of composted pine bark and peat moss fertilized with N – 250 mg/1 and Mg – 150 mg/1. It was found that cut gerberas lasted longer when they were the Alkemade type, i.e. with wide petals. Yellow flowers remained fresh longer than red and pink ones. It was also found that the vase-life period of gerberas directly correlated with the length of floral stalk, its ability to grow and the inflorescence diameter. The solution of flower preservative Proflovit-72 was effective 'in extending life at room temperature and improved the quality and longevity of flowers which were previously in coldstorage for 1 to 3 weeks.

  11. Effect of Silver Nanoparticles and Sodium Silicate on Vase Life and Quality of Cut Chrysanthemum Dendranthema grandiflorum L. (Flower

    Directory of Open Access Journals (Sweden)

    S. Kazemipour

    2016-02-01

    Full Text Available Dendranthema grandiflorum L. is one of the widely cultivated flowers around the world for producing of cut flowers. Nanometer-sized silver particles are used in various applications as an anti-microbial compound. This experiment was carried out to study the effects of silver nanoparticles (0, 5, 10 and 20 mg/L and sodium silicate (0, 50, 100 and 150 mg/L on longevity and quality of cut chrysanthemum (Dendranthema grandiflorum L. flowers. A factorial experiment was conducted based on randomized complete block design with 16 treatments, 3 replications, 48 plots and 192 cut flowers. The cut flowers were pulsed for 24 h with pulse solutions and then transported to 300 mg L-1 8-hidroxy quinoline sulfate and 3% sucrose. The characteristics such as vase life, loss of fresh weight, number of bacterial colonies in stem, lipid peroxidation, and activity of superoxide dismutase (SOD were measured. Results showed that all treatments had positive effects on the vase life of flowers. Pulse solution with 10 mg/L silver nanoparticles and 100 mg/L sodium silicate and interaction between them, increased vase life compared to the control (3.21, 4.46 and 8.50 days, respectively. In addition, the flowers pulsed with silver nanoparticles and sodium silicate exhibited higher activity of SOD, compared to control. The present study showed that using proper concentrations of silver nanoparticles and sodium silicate can enhance the vase life of cut chrysanthemum flowers.

  12. Gamma radiation use as a quarantine treatment alternative for cut flowers

    International Nuclear Information System (INIS)

    Kikuchi, Olivia Kimiko

    1999-01-01

    Methyl bromide is a broad spectrum pesticide to control insects, nematodes, weeds, pathogens and rodents It is effective to commodity treatment designed for exportation/importation, but is also toxic for human being. Besides, it is an ozone layer depleting substance and many countries are interested in finding other less damaging alternatives. The methyl bromide shall be banned until 2015 and one promising alternative is the radiation. It can be effective for some vegetables, like fresh cut flowers. The tolerance to gamma radiation was observed in some cut flowers. Dianthus (Caryophyllaceae), Gypsophyla (Caryophyllaceae), Gomphrena (Amarantaceae), Celosia (Amarantaceae) and Narcissus (Amaryllidaceae) were tolerant to 750 Gy. Heliconia and Strelitzia (Musaceae) were not tolerant, presenting a severe browning of the colored sepals. Anthurium (Araceae) was also sensitive to 750 Gy, presenting browning of the spike, discoloration and black spots on the sepals. The radiation inhibited the bud opening of Hemerocallis (Liliaceae) and Gladiolus (Iridaceae). Gerbera (Compositae) and Callistemon (Myrtaceae) wilted before the control flowers. Helianthus (Compositae) leaves wilted before the flowers because of the radiation. (author)

  13. Genetic divergence of Etlingera elatior based on agro-morphological features for cut flowers

    Directory of Open Access Journals (Sweden)

    Charleston Gonçalves

    2014-09-01

    Full Text Available Despite the wide acceptability Torch Ginger (Etlingera elatior by the consumer market and its cultivation are still restrict­ed due to the high mass of inflorescences (over 1 kg, which complicates the process of harvesting, handling, packaging and transportation. The objective of this work was to characterize agromorphological and estimate the genetic divergence among Etlingera elatior ( Jack R.M. Sm. with standard cut flower. A stand of 75 genotypes resulting from crosses between genotypes at random from the collection of germplasm with variability inflorescences of commercial interest, they keep on growing in the Research and Development of Ubatuba. Seventeen descriptors were evaluated on the leaf, inflorescence and infrutescence. The inflorescence mass, length and diameter of the flowering stem, height and flower diameter were selected as the most important descriptors for selecting accessions with standard marketing as cut flower. We selected 12 promising accessions, with characteristics appropriate to the market and with good combination of shapes and coloring bracts.

  14. Possibility in application of electron beam irradiation to plant quarantine of cut flowers

    International Nuclear Information System (INIS)

    Tanabe, Kazuo

    1994-01-01

    For the purpose of developing new quarantine procedure alternative to fumigation, electron beam irradiation was examined in the disinfestation of arthroped pests that infest cut flowers. Immature and adult two-spotted spider mites, Tetranychus urticae, which is a typical pest in horticulture due to high fertility, parthenogenesis and chemical resistance, were irradiated at a Van de graaf electron accelerator (2.5 MeV) at 0.2 - 1.4 kGy. They decreased radiosensitivity with aging. Female was much more tolerant than male throughout their life. Irradiation controlled the fertility of both sexes, and also feeding and behavioral activities. Cut flowers irradiated with the Dynamitron accelerator (5 MeV) showed various responses according to species, cultivars and tissues of plants. Carnations, tulips and gladioluses were tolerant in disinfesting or sterilizing, but some cultivars of chrysanthemum and rose showed the symptom of injury, in which flowering was delayed at low dose, and the failure of flowering and the chlorosis of leaves occurred at high dose. Floral organs were much more sensitive to radiation than others. Sensitive plants also showed the reduced production of ethylene. (K.I.)

  15. Effects of some preservative solutions on vase life and keeping quality of snapdragon (Antirrhinum majus L. cut flowers

    Directory of Open Access Journals (Sweden)

    Abdul-Wasea A. Asrar

    2012-01-01

    Full Text Available The effect of selected chemical agents used as preservative solutions to improve the keeping quality of cut snapdragon (Antirrhinum majus L. cv. Yellow Butterfly flowers had been studied. These preservative solutions (treatments were: 2% sucrose, 200 ppm 8-hydroxyquinoline sulfate (8-HQS, pulsing treatment with 200 ppm 8-HQS in combination with 2% sucrose for 12 h, pulsing the spikes with 0.2 mM silver thiosulfate (STS for 1 h, pulsing with 0.2 mM STS for 1 h followed by 2% sucrose solution, or distilled water used as control. The results showed that all treatments had improved the keeping quality and vase life of the cut flowers comparing to control ones. Among all these treatments, the 8-HQS plus 2% sucrose treatment showed best water uptake, water balance, percentage of maximum increase in fresh weight of the cut flower stem and vase life which was extended up to 18 days. Moreover, this keeping solution treatment retarded the degradation of chlorophyll as well as carbohydrate of the cut flowers during their postharvest life. It has been concluded that 200 ppm 8-HQS combined with 2% sucrose solution has the potential to be used as a commercial cut flower preservative solution to delay flower senescence, enhance post-harvest quality and prolong the vase life of cut snapdragon flowers.

  16. Effects of Nanosilver Treatments on Vase Life of Cut Flowers of Carnation (Dianthus caryophyllus cv. 'White Liberty’

    Directory of Open Access Journals (Sweden)

    Hossein Zarei

    2011-04-01

    Full Text Available Carnation (Dianthus caryophyllus is one of the most cultivated flowers around the world for producing of cut flowers. This paper assessed the efficacy of nanosilver (NS as an antibactericidal agent in extending the vase-life of cut flowers of carnation (Dianthus caryophyllus L.. Vase solutions were consisting of NS concentrations in 5, 10, 20, 40 and 80 ppm included sucrose 6 percent added in all treatments. Results showed that all NS treatments were combined with sugar extended the vase life of carnation flowers significantly compared with control. Observations indicated that NS treatments inhibited the growth of microorganisms in vase solution and considerably extend the vase-life of cut flowers of carnation.

  17. The role of silver nano-particles and silver thiosulfate on the longevity of cut carnation (Dianthus caryophyllus) flowers.

    Science.gov (United States)

    Hashemabadi, Davood

    2014-07-01

    The purpose of this study was to evaluate the efficacy of silver nano-particles (SNP) and silver thiosulfate (STS) in extending the vase life of cut carnation (Dianthus caryophyllus L. cv. 'Tempo') flowers. Pulse treatments of SNP @ 0, 5, 10 and 15 mg l(-1) and STS @ 0, 0.1, 0.2 and 0.3 mM were administered to carnation flowers for 24 hr. The longest vase life (16.1 days) was observed in flowers treated with 15 mg l(-1) of SNP + 0.2 mM STS. The least chlorophyll was destroyed in flowers treated with 15 mg I(-1) of SNP + 0.3 mM STS. Our findings showed that the 15 mg l(-1) SNP treatment inhibited bacterial growth in the preservative solution. The control flowers bloomed faster than the treated flowers. The maximum peroxidase activity and the minimum lipid peroxidation were obtained in cut flowers that were treated with 15 mg l(-1) of SNP and 0.3 mM STS. Overall, results of the study revealed that SNP and STS treatment extended the longevity of cut carnation 'Tempo' flowers by reducing oxidative stress, improving anti-oxidant system, reducing bacterial populations and delaying flowering.

  18. Oxygenated Phosphine Fumigation for Control of Light Brown Apple Moth (Lepidoptera: Tortricidae) Eggs on Cut-Flowers.

    Science.gov (United States)

    Liu, Samuel S; Liu, Yong-Biao; Simmons, Gregory S

    2015-08-01

    Light brown apple moth, Epiphyas postvittana (Walker), eggs were subjected to oxygenated phosphine fumigation treatments under 70% oxygen on cut flowers to determine efficacy and safety. Five cut flower species: roses, lilies, tulips, gerbera daisy, and pompon chrysanthemums, were fumigated in separate groups with 2,500 ppm phosphine for 72 h at 5°C. Egg mortality and postharvest quality of cut flowers were determined after fumigation. Egg mortalities of 99.7-100% were achieved among the cut flower species. The treatment was safe to all cut flowers except gerbera daisy. A 96-h fumigation treatment with 2,200 ppm phosphine of eggs on chrysanthemums cut flowers also did not achieve complete control of light brown apple moth eggs. A simulation of fumigation in hermetically sealed fumigation chambers with gerbera daisy showed significant accumulations of carbon dioxide and ethylene by the end of 72-h sealing. However, oxygenated phosphine fumigations with carbon dioxide and ethylene absorbents did not reduce the injury to gerbera daisy, indicating that it is likely that phosphine may directly cause the injury to gerbera daisy cut flowers. The study demonstrated that oxygenated phosphine fumigation is effective against light brown apple moth eggs. However, it may not be able to achieve the probit9 quarantine level of control and the treatment was safe to most of the cut flower species. Published by Oxford University Press on behalf of Entomological Society of America 2015. This work is written by US Government employees and is in the public domain in the US.

  19. Clonal evaluation of new ornamental pineapple hybrids to use as cut flowers

    Directory of Open Access Journals (Sweden)

    Davi Silva Costa Junior

    2016-09-01

    Full Text Available Embrapa Cassava and Fruits has developed ornamental pineapple hybrids for several categories of ornamental use including cut flowers, potted plants and landscaping. The objective of this study was to carry out a clonal evaluation of two ornamental hybrids using quantitative and qualitative morphological descriptors to recommend these hybrids as new ornamental pineapple cultivars. Twenty plants of each hybrid (PL01 and PL04 were evaluated regarding the response to floral induction as well as the stability and homogeneity of the clones in two production cycles. The descriptive statistics were calculated and analyzed to determine the genetic distance based on the Gower algorithm. Four groups were formed, two using parental data and the other two containing the different hybrids that were evaluated in the two growing cycles. In the floral evaluation, the time from field planting to harvest of the stem as a cut flower was determined to be as long as 17 months in the first cycle and 13.5 months in the second cycle for both hybrids. They were characterized as a novelty in the flower market; they showed genetic stability and homogeneity and can be recommended as new cultivars of ornamental pineapple because they exhibit satisfactory quality and meet the market requirements.

  20. Commissioning a hobby cutting device for radiochromic film preparation.

    Science.gov (United States)

    Zolfaghari, Somayeh; Francis, Kirby E; Kairn, Tanya; Crowe, Scott B

    2017-06-01

    In addition to a high spatial resolution and well characterised dose response, one of the major advantages of radiochromic film as a dosimeter is that sheets of film can be cut into pieces suitable for use as calibration films, and for in vivo and phantom measurements. The cutting of film is typically done using scissors or a guillotine, and this process can be time-consuming, limited in precision, requires extensive handling and does not allow holes to be cut from the film without cutting from an existing edge. This study investigated the use of a Brother ScanNCut hobby cutting system for EBT3 film preparation. The optimal operating parameters (blade size, pressure, speed) that resulted in precise cuts with minimal delamination at cut edges were identified using test cutting patterns. These parameters were then used to cut a large film insert for a stereotactic head phantom for comparison against an insert cut with scissors. While the hobby cutting system caused a wider region of delamination at the film edge (1.8 mm) compared to scissors (1 mm), the hobby cutting system was found to be able to produce reproducible cuts more efficiently and more accurately than scissors. The use of the hobby cutting system is recommended for complex phantom inserts (containing sharp corners or holes for alignment rods) or in situations where large numbers of film pieces need to be prepared.

  1. Improving the Keeping Quality and Vase Life of Cut Alstroemeria Flowers by Pre and Post-harvest Salicylic Acid Treatments

    Directory of Open Access Journals (Sweden)

    Elnaz SOLEIMANY-FARD

    2013-08-01

    Full Text Available Keeping quality and length of vase life are important factors for evaluation of cut flowers quality, for both domestic and export markets. Studding the effect of pre- and post-harvest salicylic acid applications on keeping quality and vase life of cut alstroemeria flowers during vase period is the approach taken. Aqueous solutions of salicylic acid at 0.0 (with distilled water, 1, 2 and 3 mM were sprayed to run-off (approximately 500 mL per plant, about two weeks before flowers harvest. The cut flowers were harvested in the early morning and both of cut flowers treated (sprayed and untreated were kept in vase solutions containing salicylic acid at 0.0 (with distilled water, 1, 2 and 3 mM. Sucrose at 4% was added to all treatments as a base solution. The changes in relative fresh weight, water uptake, water loss, water balance, total chlorophyll content and vase life were estimated during vase period. The results showed that the relative fresh weight, water uptake, water balance, total chlorophyll content and vase life decreased significantly while the water loss increased significantly during experiment for all treatments. A significant difference between salicylic acid and control treatments in all measured parameters is observed. During vase period, the salicylic acid treatments maintained significantly a more favourable relative fresh weight, water uptake, water balance, total chlorophyll content and supressed significantly water loss, as compared to control treatment. Also, the results showed that the using salicylic acid increased significantly the vase life cut alstroemeria flowers, over control. The highest values of measured parameters were found when plants were treated by pre + post-harvest application of salicylic acid at 3 mM. The result revealed that the quality attributes and vase life of cut alstroemeria flowers were improved by the use of salicylic acid treatment.

  2. Use of 1-methylcyclopropene for the control of Botrytis cinerea on cut flowers

    Directory of Open Access Journals (Sweden)

    L. Seglie

    2009-09-01

    Full Text Available Cut flowers are marketed for their ornamental characteristics making post-harvest flower life an important determinant of crop value. Botrytis cinerea is one of the most significant post-harvest fungal pathogens causing losses in ornamental plants. Disease caused by this fungus seems to be enhanced by the presence of a ethylene hormone, that both the plant and the fungus are known to synthesize. The aim of the experiment was to determine if 1-methylcyclopropene (1-MCP, an ethylene antagonist, could be used to reduce B. cinerea damage to cut flowers. Six cultivars of four ornamental species: Dianthus caryophyllus ‘Idra di Muraglia’, Rosa × hybrida ‘White Dew’ and ‘Ritz’, Ranunculus asiaticus ‘Saigon’ and ‘Green’, and Cyclamen persicum line ‘Halios Bianco Puro Compatto’ were given three concentrations of 1-MCP (0.38 μl L-1, 1.14 μL L-1, and 3.62 μL L-1 for 24 hours. Subsequently, 10 petals per cultivar were treated with a B. cinerea conidial suspension (5×103 conidia cm-2 and stored in air-tight vases. To evaluate B. cinerea development an arbitrary damage scale (1–7 was used. A high concentration of 1-MCP significantly reduced B. cinerea damage on D. caryophyllus ‘Idra di Muraglia’ and C. persicum ‘Halios White Pure Compact’ petals. In carnation, 1-MCP treatment slowed B. cinerea infection; its threshold level was reached three days after that of the control. In cyclamen, treated petals and control petals remained aesthetically good until day 53 and day 28 respectively. At low concentrations, 1-MCP slowed grey mould on R. × hybrida ‘Ritz’ for up to three days beyond the control. On the two buttercup cultivars ‘Green’ and ‘Saigon’, 1-MCP treatments were not effective. In conclusion, 1-MCP limited pathogen development; its effect depended on the species and the 1-MCP concentration. Further investigations will be performed to improve methods to reduce B. cinerea development on the petals of cut

  3. Gamma irradiation a potential quarantine treatment against mites on cut flowers

    International Nuclear Information System (INIS)

    Hamidah Sulaiman; Mohd Shamsudin Osman; Zainon Othman; Mohd Ridzuan Ismail

    2002-01-01

    Cut flower, an important export commodity of Malaysia in international trade, is often subjected to infestation by various pests such as mites, scales and thrips. The use of low ionizing radiation has been suggested as an alternative to methyl bromide fumigation, the current pest disinfestations treatment for cut flower but which is being phased out due to environmental concerns. The criterion for efficacy of radiation as a quarantine treatment will be inability of treated mites to reproduce at a new location rather than causing immediate mortality. A dose of 200 Gy prevented reproduction in female adult of Tetranychus piercie by inducing sterility while a much higher dose of 5 kGy is required to produce instant mortality. Based on the results obtained gamma irradiation of dose range 300-500 Gy may be applied as a quarantine treatment for Tetranycus piercie. However, this dose range is only suitable for chrysanthemum (in 4% sucrose solution) but not roses, carnations and orchids which showed phytotoxic symptoms at dose range of 100-400 Gy. (Author)

  4. Gamma irradiation as a quarantine treatment against mite (Tetranychidae) on cut flowers

    International Nuclear Information System (INIS)

    Zainon Othman; Mohd Ridzuan Ismail; Hamidah Sulaiman; Mohd Shamsudin Osman

    2000-01-01

    Cut flower, an important export commodity of Malaysia in international trade, is often subjected to infestation by various pests such as mites, scales and thrips. The use of low ionising radiation has been suggested as an alternative to methyl bromide fumigation, the current pest disinfestation treatment for cut flower but which is being phased out due to environmental concerns. The criterion for efficacy of radiation as a quarantine treatment will be the inability of treated mites to reproduce at a new location rather than causing immediate mortality. Irradiating red spider mite Tetranychus piercie at a dose of 300 and 400 Gy produced sterile female adults from irradiated protonymph and deutonymph respectively. A lower dose of 200 Gy induced sterility in female adults developed from the less immature stages of irradiated egg and larva. Deteriorating effects caused by irradiation treatment were reflected in immatures by their reduced emergence rate/mortality in subsequent developmental stages. A dose of 240 Gy prevented reproduction in female adult of T piercie by inducing sterility while a much higher dose of 5 kGy is required to produce instant mortality. Based on the results obtained gamma irradiation of dose range 300-400 Gy may be applied as a quarantine treatment against Tetranychus piercie. However, this dose range is only suitable for chrysanthemum (in 4% sucrose solution) but not roses, carnations and orchids which showed phytotoxic symptoms at dose range of 100-300 Gy

  5. IMPROVING POSTHARVEST VASE-LIFE AND QUALITY OF CUT GERBERA FLOWERS USING NATURAL AND CHEMICAL PRESERVATIVES

    Directory of Open Access Journals (Sweden)

    Mehrdad Jafarpour

    2015-06-01

    Full Text Available Gerbera is one of ten popular cut flowers in the world which occupies the forth place according to the global trends in floriculture. Hence, this study aimed to investigate the effects of chemical, hormonal and essential oil substances in preservative solutions to improve its postharvest qualitative characteristics. Two pulse treatments including distilled water (pulse1 and 4% CaCl2 + 3% sucrose (pulse2 for 24 hour were applied before long-time treatments. Long-time treatments were comprised of (1 Hormonal treatments: 0, 25, 30 mg*l-1 Gibberellic acid, 0, 150, 250 mg*l-1 Benzyl adenine and 0, 100, 200 mg*l-1 5-Sulfosalicylic acid (2 Chemical treatments: 0, 0.4, 0.8 mM Silver thiosulphate, 0, 5, 10 mg*l-1 Nano-silver particles, 0, 4, 6 mM Aminooxy acetic acid and 0, 200 and 400 mg*l-1 8-hydroxyquinoline sulphate (3 Essential oils: Thymus essential oil and Stevia essential oils (0, 0.1 and 0.2 mg*l-1. Data were subjected to analysis of variance based on the factorial experiment model in the layout completely randomized design. Mean comparison was performed using the Duncan’s multiple range test. Parameters of fresh weight, stem bending, capitulum diameter, carotenoid pigments of petal and vase-life longevity were evaluated during 12 days. The highest fresh weight was obtained when cut flowers were held in a solution containing pulse1 + 250 mg*l-1 BA. Among all treatments, 8-HQS treatment showed the best effects on preventing stem bending, increasing capitulum diameter and also on prolonging of vase-life, but nonetheless, the effects of pulse treatments and 8-HQS concentrations were insignificant. To conclude, 200 mg*l-1 8-HQS without pulse treatment has the potential to be used as a commercial preservative solution to improve the keeping quality and vase-life of this important cut flower.

  6. Effectiveness of electron irradiation as a quarantine treatment of cut flowers

    International Nuclear Information System (INIS)

    Hayashi, T.; Todoriki, S.; Nakakita, H.; Dohino, T.; Tanabe, K.

    1999-01-01

    The effects of electron beams on spider mite (Tetranychus urticae) and flour beetle (Tribolium freemani) were slightly smaller than those of gamma-rays. 'Soft-electrons' (low-energy electrons) at an energy of 170 keV inactivated eggs, larvae, pupae, and adults of the flour beetle. Electron beams at doses up to 400 Gy killed or sterilized all the pests for cut flowers tested; spider mite (Tetranychus urticae), mealybug (Pseudococcus comstocki), leaf miner (Liriomyza trifolii), thrips (Thrips palmi, Thrips tabaci), cutworm (Spodoptera litura), and aphid (Myzus persicae). Carnation, alstromeria, gladiolus, tulip, statice, stock, dendrobium, prairie gentian, oncidium, campanula, gloriosa, fern, gypsophila, freesia, lobelia, triteleia, and gerbera were resistant to radiation, while chrysanthemum, rose, lily, calla, antherium, sweet pea, and iris were sensitive. Radiation-induced deterioration of chrysanthemum could be prevented by post-irradiation treatment with commercial preservative solutions or sugar solutions. (author)

  7. Irradiation as a quarantine treatment of cut flowers, ginger and turmeric against mites, thrips and nematodes

    International Nuclear Information System (INIS)

    Bhuiya, A.D.; Majumder, M.Z.R.; Hahar, G.; Shahjahan, R.M.; Khan, M.

    1999-01-01

    Effect of radiation on different developmental stages of mites, thrips, and nematodes were observed to determine their sterility doses and to develop a method for detection of irradiated and unirradiated specimens. A brief survey on cut-flower and tuber associated pests, and their biological study along with the tolerance level of host products were conducted. Mites Oligonychus biharensis (Hirst) and Tetranychus sp., as well as four species of thrips viz. Retithrips syriacus (Mayet), Haplothrips gowdeyi Franklin, Frankliniella intonsa Tribom, and Microcephalothrips abdominalis Crowford were recognized as common pests damaging plants and cut-flowers. Common species of nematodes infesting ginger and turmeric were Meloidogyne spp. and Ditylenchus spp. Results indicated that a dose 0.2 kGy and above caused complete sterility of male and female mites and insects. Various pre-adult developmental stages required less irradiation dose (0.05-0.1 kGy) for sterilization. Variation of melanization in treated and untreated life stages of mites and thrips could not be observed even at 0.2 kGy with the 2-methyl DOPA spot test. Inhibition of melanization in irradiated pupal stages of thrips were observed at doses above 0.4 kGy. Both irradiated and unirradiated thrips were identical in their protein banding pattern. Virtually no protein bands were observed in irradiated and unirradiated nematodes when samples were run on 5% PAGE in TBE. Tube rose and marigold treated with higher dose (0.3 to 0.5 kGy) caused no remarkable morphological degradation for 7-8 days after irradiation. Nematodes were resistant to radiation. Complete elimination and abnormalities of J 2 stages of Meloidogyne spp. and Ditylenchus spp. were not observed even at 4.0 kGy although significant weight loss and spoilage of tubers were recorded after 14 days of radiation exposure. (author)

  8. Consumer choice of cut flowers and pot plants : a study based on consumer panel data of households in the Netherlands

    NARCIS (Netherlands)

    Tilburg, van A.

    1984-01-01

    The objectives of the study were to relate aspects of consumer behaviour on cut flowers and pot plants to marketing variables and characteristics of households, to determine whether market segments could be found, and to determine the applicability of methods and models developed to the

  9. Application of arbuscular mycorrhizal fungi on the production of cut flower roses under commercial-like conditions

    Energy Technology Data Exchange (ETDEWEB)

    Garmendia, I.; Mangas, V. J.

    2012-11-01

    The objective of this work was to study the influence of two arbuscular mycorrhizal fungi (AMF) Glomus mosseae (Nicol. and Gerd.) Gerd. and Trappe, and G. intraradices (Schenck and Smith) on cut flower yield of rose (Rosa hybrida L. cv. Grand Gala) under commercial-like greenhouse conditions. Flower production was positively influenced by G. mosseae inoculation. Both inocula tested caused low levels of mycorrhizal root colonization, with higher percentages in Rosa associated with G. mosseae. Significant improvement of plant biomass, leaf nutritional status or flower quality was not detected in inoculated plants probably due to the low symbiosis establishment. However, G. mosseae reduced by one month the time needed for 80% of the plants to flower and slightly increased number of cut flowers relative to non-mycorrhizal controls on the fourth, sixth and eighth months after transplanting. It is suggested that an altered carbohydrate metabolism could contribute to this positive effect. Low colonization of rose roots supports the idea that more effort is required to ensure successful application of AMF in ornamental production systems. (Author) 40 refs.

  10. Green manure affects cut flower yield and quality of ‘Vegas’ rose bushes

    Directory of Open Access Journals (Sweden)

    Elka Fabiana Aparecida Almeida

    2017-01-01

    Full Text Available Rose cultivation requires many inputs for satisfactory production, making the process expensive. Nowadays, alternative practices have been used for sustainable crop production. Green manure is an agricultural practice that aims to maintain or improve soil fertility, increasing its yielding capacity. The objective of this research was to evaluate the effect of green manure with legumes on the yield and quality of ‘Vegas’ roses. Grafted rose seedlings were cultivated in open field for 30 months. Legumes used as green manure and planted intercropped with rose bushes were forage peanut (Arachis pintoi and jack bean (Canavalia ensiformis. Pigeon pea (Cajanus cajan was grown in a separate area, cut, macerated, and applied in the rows between rose bushes every 3 months. Plants of control group received no green manure, only mineral fertilizer and cattle manure, as in all other treatments. The experimental design was randomized block with four treatments (three green manure species plus the control and seven replications. The highest yield and quality of flower stems in ‘Vegas’ occurred with addition of pigeon pea on the soil surface or chemically treated (control. Forage peanut and jack bean are not suitable for intercropping with ‘Vegas’ rose bushes due to possible nutrient and water competition.

  11. Governance restructuring in the cut flower trade in France and its impacts on the producers in developing countries

    OpenAIRE

    Pedroza Filho, Manoel Xavier

    2009-01-01

    The objective of the paper is to examine how retailers play a powerful role in shaping the governance in cut flower trade in France. Global Value Chain analysis has been used to explain why a distribution system originally based on spot markets has been replaced by tightly integrated supply chains. It allowed an exploration of the consequences of these changes on the structure of the value chain and the inclusion and exclusion of different agents in the chain. Fieldwork were carried out betwe...

  12. Opening of cut Iris x hollandica flowers as affected by temperature, dry storage, and light

    NARCIS (Netherlands)

    Doorn, van W.G.; Dole, I.; Celikel, F.G.; Harkema, H.

    2014-01-01

    Flower opening in Iris (Iris x hollandica) depends on elongation of the pedicel + ovary. This elongation lifts the bud above the point where the sheath leaves no longer mechanically inhibit lateral tepal movement. We here report on the effects on flower opening of storage at various temperatures, of

  13. Identification of early flowering mutants from the cut chrysanthemum variety 'Jinba' and research on the physiological characteristics

    International Nuclear Information System (INIS)

    Cai Haiyan; Wen Lizhu; Zheng Chengshu; Sun Xia; Li Yingying

    2013-01-01

    In this study, the morphological characteristics the early flower mutants induced by EMS from the cut chrysanthemum variety 'Jinba' were characterized, and ISSR-PCR was used for molecular identification of mutants. The photosynthetic characteristics, stomatal and vascular bundle cross-section for the mutants were also measured. The florescence of mutants appeared about 59 days earlier than that of controls. The plant height, leaves and flower diameter were all smaller than those of controls, but they grew well. From the PCR amplification, the differences between the mutants and the control were in the present or absent of the amplified bands. The photosynthetic characteristics, such as the net photosynthetic rate (Pn), stomatal conductance (Gs), transpiration rate (Tr) and intercellular CO_2 concentration were all significantly lower than the controls. The number of mutant's stomata significantly reduced, and some stomatas appeared variation. The vascular bundles including primary phloem and primary xylem displayed difference in the size and shape. All these work lays a foundation for breeding the early flowering of excellent chrysanthemum and further characterization of the early flowering genes. (authors)

  14. Effect of Mentha pulegium extract and 8-hydroxy quinoline sulphate to extend the quality and vase life of rose (Rosa hybrid) cut flower.

    Science.gov (United States)

    Hashemabadi, Davood; Torkashvand, Ali Mohammadi; Kaviani, Behzad; Bagherzadeh, Maryam; Rezaalipour, Mohaddeseh; Zarchini, Mohammad

    2015-01-01

    Rose is an ornamental plant which contains one of the world's top cut flowers. Vase life of cut rose flower is short. Extracts of Mentha pulegium and 8-hydroxy quinoline sulphate (8-HQS) were used as two preservative solutions, aiming to extend the vase life of cut rose (Rosa hybrid L.) flowers. Rose flowers were treated with a vase solution containing the extract of M. pulegium, at concentrations of 0, 10, 20 and 30%, in combination with 8-HQS at concentrations of 0, 200, 400 and 600 mg l(-1). Longevity of cut roses flowers was determined on the basis of wilting and chlorophyll retention. Cut roses flowers were kept at room temperature (20 ± 2 degrees C) under normal day light and natural ventilation. The vase life of cut flowers studied was prolonged by all 8-HQS and extract treatments. The best concentration of 8-HQS and extractwere 400 mg l(-1) and 10%, respectively. Our results indicated that the flowers treated with the extract and 8-HQS had longer vase life, higher rate of solution uptake and lower SPAD value (total chlorophyll) compared to the control. Also, cut flowers treated with the extract and 8-HQS had least bacterial colonies. The greatest longevity of vase life by 11.20 and 10.25 days was related to 400 mg I(-1) 8-HQS and 10% of extract, respectively. These treatments improved cut vase life more than the control treatment. The maximum solution uptake (1.85 ml g(-1) f.wt.) and minimum SPAD value (2.19) were calculated in 30% extract along with 200 mg l(-1) 8-HQS, and 200 mg l(-1) 8-HQS, respectively. The lowest number of bacterial colonies (55.75) was obtained in treatment of 600 mg l(-1) 8-HQS. Flower quality of specimens treated with extract and 8-HQS was better than those of the control. The experiments were repeated three times with three replicates and a completely randomized design had been used. The present study concludes that it would be possible to use preservative solutions containing extract of M. pulegium L. and 8-HQS to extend vase

  15. The Study of Controlling the Bacterial Growth in the Cut Stem Rose (Rosa Hybrida L.‘Dolce Vita’ Flowers with Preservative Compounds

    Directory of Open Access Journals (Sweden)

    A. Oraee

    2015-01-01

    Full Text Available Due to the economic importance of longevity of cut flowers, this study was conducted to evaluate the effect of nano-silver, silver thiosulfate, hydroxyl quinoline and a natural compound, thymol, on vase life and number of bacteria in cut stem ends of Rose flowers cv. Dolce vita. Cut flowers were transferred to laboratory at 22 ± 1ºC temperature and 60 ± 5% relative humidity. Cut flowers were pulse-treated with 2.5, 5 and 10 mg L-1 nano-silver, 0.5,1 and 2 mM silver thiosulfate, 50, 100 and 200 mg L-1 hydroxy quinoline and 50, 100, 200 mg L-1 thymol with 5% sucrose. Experiment was conducted in a completely randomized design with 8 replications and one flower in each experimental unit. Based on the results, all of the treatments showed positive effects on the vase life of flowers and number of bacteria in cut stem ends during the vase period, and no bacteria were found in 5 and 10 mg L-1 SNP treatments. The nano-silver (5 and 10 mg L-1 treatments showed the greatest mean longevity (19 days. Considering the results and economical and functional aspects of the tested materials, nano-silver treatment can be used for increasing the vase life of ‘Dolce vita’rose.

  16. Flower-shaped gold nanoparticles: Preparation, characterization, and electro

    Directory of Open Access Journals (Sweden)

    Islam M. Al-Akraa

    2017-09-01

    Full Text Available The modification of a glassy carbon electrode with gold nanoparticles was pursued, characterized, and examined for electrocatalytic applications. The fabrication process of this electrode involved assembling the gold nanoparticles atop of amino group grafted glassy carbon electrode. The scanning electron microscopy indicated the deposition of gold nanoparticles in flower-shaped nanostructures with an average particle size of ca. 150 nm. Interestingly, the electrode exhibited outstanding enhancement in the electrocatalytic activity toward the oxygen evolution reaction, which reflected from the large negative shift (ca. 0.8 V in its onset potential, in comparison with that observed at the bulk unmodified glassy carbon and gold electrodes. Alternatively, the Tafel plot of the modified electrode revealed a significant increase (∼one order of magnitude in the apparent exchange current density of the oxygen evolution reaction upon the modification, which infers a faster charge transfer. Kinetically, gold nanoparticles are believed to facilitate a favorable adsorption of OH− (fundamental step in oxygen evolution reaction, which allows the charge transfer at reasonably lower anodic polarizations.

  17. Combined preharvest and postharvest treatments affect rapid leaf wilting in Bouvardia cut flowers

    NARCIS (Netherlands)

    Schouten, Rob E.; Dien, van Luka; Shahin, Arwa; Heimovaara, Sjoukje; Meeteren, van Uulke; Verdonk, Julian C.

    2018-01-01

    Bouvardia is an ornamental shrub, commercially cultivated as flowering stem. Occasionally, negative water balance, which leads to rapid leaf wilting, ends vase life immediately. This work studies the effect of preharvest and postharvest conditions on vase life, water uptake and transpiration.

  18. Effects of cut flower shape and content of sugars in flower organs on the longevity of vase life in standard type carnation [Dianthus] and relationships between the longevity and temperature and solar radiation during the growing period

    International Nuclear Information System (INIS)

    Miura, Y.; Ozawa, Y.; Takahashi, M.; Igarashi, D.; Inoue, T.; Uematsu, H.; Imai, K.; Matsuyama, A.; Soga, A.; Yoshida, M.

    2002-01-01

    We obtained carnation cut flowers 'Fransisco' from a greenhouse on the first Monday every month in February to June, and investigated the relationship between vase life and content of sugars in the cut flowers. Correlations between the longevity of vase life and temperatures in the greenhouse and amount of solar radiation during the growing period were also investigated. 1. Fresh weight and stem diameter of the cut flowers were highest in February and March, and decreased from April to June. Mean vase life was shortest in March (4.5 days) and longest in May (5.9 days). 2. Fructose and glucose contents in petals were highest in May (10.0 mg and 6.5 mg ¥ 100 mg -1 DW) and lowest in March (6.0 mg and 4.8 mg ¥ 100 mg -1 DW). 3. The vase life of carnation was highly correlated with day-time or night-time mean temperatures in 20 days to harvest, and it was estimated that the optimum growing temperature for long vase life of the cut flower was around 22°C in day-time and 14°C in night-time. (author)

  19. The Effect of Thyme and Savory Essential Oils on Quality and Vase life of Cut Narcissus Flowers (Narcissus tazetta L. cv. Shahla

    Directory of Open Access Journals (Sweden)

    iman baninaeim

    2017-09-01

    Full Text Available Introduction: Narcissus is a genus of hardy, spring-blooming, bulbous plants in the family Amaryllidaceae. Numerous studies have demonstrated positive effects of various chemical additives (e.g. biocides, surfactants, ethylene inhibitors, wound healing enzyme inhibitors on the postharvest, water relations and longevity of cut flowers. Cut flowers can have limited commercial value because of their dehydrating during vase life that decreased water uptake. Petal senescence is part of a developmental continuum in cut flowers and proceeded by tissue differentiation, growth and development of seeds and coordinated by plant hormones. Senescence can be studied at cellular, tissue, organ or organization level as a genetically programmed event. The vase life of cut narcissus flowers is often very short. The development of senescence symptoms is caused by vascular occlusion, which inhibits water supply to the flowers. Petal senescence was marked by the loss of turgor in petal tissue followed by complete wilting. The development of occlusions is thought to be caused by various factors, such as bacteria, air emboli and physiological responses of stems to cutting. However, despite anecdotal evidence of positive effects, improving postharvest water relations of cut flowers by various physical stem-end treatments is little researched. Materials and Methods: The Narcissus flowers harvested from Khafr city of Fars province, in February 2015. The Thyme plants harvested in September 2014 and Savory plants harvested in December 2014 and then submitted to hydrodistillation in a Clevenger-type apparatus for 3 hours. This study was carried out in a completely randomized design with 3 replications. The treatments included control (distilled water, two levels of Savory essential oil (50 and 100 ppm and two levels of Thyme essential oil (100 and 200 ppm. 2% sucrose were added to control and other of treatments . The cut flowers were also kept at temperature of 20±2 º

  20. Inhibition of water uptake after dry storage of cut flowers: Role of aspired air and wound-induced processes in Chrysanthemum

    NARCIS (Netherlands)

    Meeteren, van U.; Arévalo-Galarza, L.; Doorn, van W.G.

    2006-01-01

    We investigated the relative role of aspired air and a plant-induced reaction in the vascular occlusion of dry-stored cv. Cassa chrysanthemum flowers (Chrysanthemum × morifolium Ramat). Measurements of hydraulic capacity showed that the air that is aspired directly after cutting (into the opened

  1. Cutting

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Cutting KidsHealth / For Teens / Cutting What's in this article? ... Getting Help Print en español Cortarse What Is Cutting? Emma's mom first noticed the cuts when Emma ...

  2. Preparation of flower-like CuS by solvothermal method and its photodegradation and UV protection

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Xiao-Sai; Shen, Yong, E-mail: shenyong@sues.edu.cn; Xu, Li-Hui; Wang, Li-Ming; Xing, Ya-Jun

    2016-07-25

    The flower-like CuS with hierarchical structures were synthesized by a solvothermal method. X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, UV–vis optical absorption spectroscopy and thermogravimetric analysis (TGA) and ultraviolet transmittance analyzer labsphere were used to characterize the as-prepared products. The results of photocatalytic degradation of Methylene blue (MB) demonstrated that the as-prepared flower-like CuS possessed high photocatalytic performance in UV and visible range and its band gap was 1.45 eV. The degradation rate of MB by CuS with the absence of H{sub 2}O{sub 2} was 98.23% and 100% under xenon lamp and Mercury tungsten blended lamp for 30 min, respectively. And a new approach for ultraviolet (UV) protection of cotton fabrics treated by flower-like CuS microspheres was innovatively investigated and the results showed that flower-like CuS was a good UV resistant material. - Highlights: • The flower-like CuS was prepared via solvothermal method. • The as-prepared CuS showed better photodegradation of MB solution under visible region. • The cotton fabric treated by the obtained flower-like CuS was proved to have a potential application in anti-UV field.

  3. Degradation in the fatigue strength of dentin by diamond bur preparations: Importance of cutting direction.

    Science.gov (United States)

    Majd, B; Majd, H; Porter, J A; Romberg, E; Arola, D

    2016-01-01

    The objectives of this investigation were to evaluate the degradation in fatigue strength of dentin by diamond bur preparations and to identify the importance of cutting direction. Three groups of coronal dentin specimens were prepared from unrestored third molars, including a flaw free "control," and two groups that received a diamond bur cutting treatment performed parallel or perpendicular to the specimen length. The specimens were subjected to static or cyclic flexural loading to failure and the results were compared with data for carbide bur cutting. Under static loading diamond bur cutting resulted in significantly lower flexure strength (p ≤ 0.05) than the control for both cutting directions (from 154 to ∼124 MPa). However, there was no significant difference in the strength between the control and carbide bur treated specimens. Similarly, the fatigue strength of the diamond bur treated specimens was significantly lower (p ≤ 0.0001) than that of the control for both cutting directions. Cutting in the perpendicular direction resulted in nearly 60% reduction to the endurance limit (from 44 to 19 MPa). Based on the results, diamond bur cutting of cavity preparations causes a reduction in the fatigue strength of dentin, regardless of the cutting direction. To maintain the durability of dentin, cavity preparations introduced using diamond burs must be performed with appropriate cutting direction and followed by a finishing pass. © 2014 Wiley Periodicals, Inc.

  4. The Effect of Irrigation Cut-off in Flowering Stage and Foliar Application of Spermidine on Essential Oil Quantity and Quality of Three Ecotypes of Cumin

    Directory of Open Access Journals (Sweden)

    Sarah Bakhtari

    2017-08-01

    Full Text Available Introduction Cumin (Cuminum cyminum L. is an annual plant that commonly cultivated in arid and semiarid regions of Iran. The crop has a wide range of uses including medicinal, cosmetic and food industry. Cumin occupies about 26% of total area devoted to medicinal plants in Iran. However, cumin is seriously affected by the Fusarium wilt and blight diseases. The diseases usually increase under warm and wet conditions. Control of the diseases incidence is a crucial factor for cumin production. Limited control of the diseases is provided by seed pre-sowing with certain fungicides such as benlate. Soil fumigation with methyle bromide can provide a control measure against the disease but may be limited application value for large scale production systems in the open field. In addition, methyle bromide is considered an ozone-depleting compound and has potential risk on the living environment and human health. Considering the environmental limitations of chemical fungicides, it seems appropriate to search for a supplemental control strategy .It was demonstrated that peak of the diseases incidence is occurred at flowering stage and irrigation cut-off in this time may be reduced the diseases density. Materials and methods This experiment was conducted in a split-split-plot arrangement in randomized complete block design with three replications in research farm of Shahid Bahonar University of Kerman at 2014. The experimental treatments were irrigation (complete irrigation and cut-off the irrigation in flowering stage assigned to main plots, foliar application of spermidine (0, 1 and 2 Mm as subplot and cumin ecotypes (Kerman, Khorasan and Esfahan that was randomized in sub-subplot. The seedbed preparation was made based on common practices at the location. Plots size under the trial was 4 m×3 m so as to get 50 cm inter row spacing in six rows. The ideal density of the crops was considered as 120 plant.m-2. As soon as the seeds were sown, irrigation

  5. Preparation and characterization of flower-like gold nanomaterials and iron oxide/gold composite nanomaterials

    International Nuclear Information System (INIS)

    Yang Zusing; Lin, Z H; Tang, C-Y; Chang, H-T

    2007-01-01

    We have successfully synthesized flower-like gold nanomaterials and Fe 3 O 4 /Au composite nanomaterials through the use of wet chemical methods in aqueous solution. In the presence of 0.5 mM citrate, 0.313 mM poly(ethylene glycol), and 109.72 mM sodium acetate (NaOAc), we prepared Au nanoflowers (NFs) having diameters ranging from 300 to 400 nm in aqueous solution after the reduction of Au ions at room temperature for 10 min. In the presence of spherical Fe 3 O 4 nanomaterials, we applied a similar synthetic method to prepare Fe 3 O 4 /Au composite nanomaterials, including nanowires (NWs) that have a length of 1.58 μm and a width of 28.3 nm. We conducted energy-dispersive x-ray analysis, scanning electron microscopy, transmission electron microscopy (TEM), ultraviolet-visible (UV-vis) absorption, and x-ray powder diffraction measurements to characterize the as-prepared flower-like Au nanomaterials and Fe 3 O 4 /Au composite nanomaterials. From time-evolution TEM measurements, we suggested that Au atoms that were bound to the Fe 3 O 4 nanomaterials grew to form Fe 3 O 4 /Au composite nanomaterials. The as-prepared Au NFs absorbed light strongly in the visible-near-infrared (Vis-NIR) region (500-1200 nm). The Fe 3 O 4 /Au composite nanomaterials had electronic conductivities greater than 100 nA at an applied voltage of 20 mV, which induced a temperature increase of 20.5 ± 0.5 deg. C under an alternating magnetic field (62 μT)

  6. Preparation of flower-like CuS by solvothermal method for photocatalytic, UV protection and EMI shielding applications

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Xiao-Sai; Shen, Yong, E-mail: shenyong@sues.edu.cn; Xu, Li-Hui; Wang, Li-Ming; Lu, Li-sha; Zhang, Ya-ting

    2016-11-01

    Highlights: • The flower-like CuS was synthesized by a facil solvothermal method. • The as-prepared flower-like CuS showed better solar light-driven photocatalytic activity. • The as-prepared CuS could act as a novel UV blocker. • The flower-like CuS potentially hold promise as electromagnetic shielding material. - Abstract: The flower-like CuS hierarchical structures were synthesized by solvothermal method. The as-prepared products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared(FTIR) spectroscopy, UV–vis optical absorption spectroscopy and thermogravimetric analysis (TGA). The results demonstrated that the as-prepared flower-like CuS with the diameter of 1–5 um was pure hexagonal phase CuS and had well-defined flower-like structures. (1) The as-prepared CuS was proved to possess high photocatalytic performance with band gap of 1.45 eV. The degradation rate of Methylene blue (MB) was up to, 98.26%, 100% after 30 min under UV and visible irradiation. (2)The UPF of cotton fabric treated with CuS reached up to 174 compared with the original untreated fabric with the UPF 20.62. (3) The electromagnetic interference shielding effectiveness (EMI SE) of CuS coating was up to 27–31 dB when the content of CuS increased to 28.6%wt in the frequency of 300 KHz–3 GHz. Furthermore, the influence of reaction conditions on the morphology of the as-prepared CuS was investigated systematically and the possible formation mechanism of the CuS hierarchical structure was also proposed.

  7. Preparation of flower-like CdS with SDBS as surfactant by hydrothermal method and its optical properties

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yongqian, E-mail: cugwyq@126.com [Faculty of Material Science and Chemistry, China University of Geosciences, Wuhan 430074 (China); Yang, Xiande; Ma, Qun; Kong, Junhan; Jia, Hanxiang; Wang, Zhengshu [Faculty of Material Science and Chemistry, China University of Geosciences, Wuhan 430074 (China); Yu, Meihua [School of Materials Science and Engineering, Guangxi University, Nanning 530004 (China)

    2015-06-15

    Graphical abstract: FESEM image of the CdS obtained by 0.01 mol Cd(NO{sub 3}){sub 2}·4H{sub 2}O, 0.03 mol thiourea and 0.5 g SDBS at 160 °C for 24 h. - Highlights: • The role of SDBS is to assemble CdS crystals together to form flower-like structures. • Both reaction time and temperature affect the morphology of flower-like structures. • The growth mechanism of flower-like structures is reasonable, clear and concise. • Its optical energy band gap is 2.50 eV, and it has absorption in visible region. • PL result of flower-like structures shows the max emission wavelength is 508.6 nm. - Abstract: In this article, the flower-like CdS have been prepared by hydrothermal method with thiourea as sulfur source and SDBS as surfactant. The effects of different experimental conditions on the morphology of CdS have been investigated. The performances of CdS have been analyzed by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), room temperature photoluminescence (PL) and UV–vis. The result of XRD indicates that CdS we prepared are highly crystallized, which are of hexagonal phase. The FE-SEM results indicate that the main role of SDBS is to make the CdS crystals assemble together to form the flower-like structures, and the reaction time affects the morphology of CdS, and the suitable reaction temperature is 160 °C. Its optical energy band gap is observed at 2.50 eV. The fluorescence spectrum shows that the flower-like CdS have a broad absorption peak and the max emission wavelength is 508.6 nm. The growth mechanism for the formation of CdS with flower-like structures is also described.

  8. Effect of Irrigation CutOff on Flowering Stage and Foliar Application of Spermidine on Some Quantitative and Qualitative Characteristics of Various Ecotypes of Cumin

    Directory of Open Access Journals (Sweden)

    Sarah Bakhtari

    2017-02-01

    plants and proline contents were assessed. The results showed that irrigation treatment had a significant effect on all the studied traits except number of branches and umbels per plant. The irrigation cutoff at flowering stage caused a significant increase in seeds per umbel, infected plants and seed yield per plant and hectare Whereas harvest index, essential oil percentage and yield and proline contents were higher in irrigation cutoff treatment compared to completely irrigated treatment. The value of decrease in seed yield per hectare as affected by irrigation cutoff was so lower than that per plant; because more infected plants were observed in completely irrigatedtreatment in comparison with cutoff irrigated treatment. Decreasing the value of the seed yield per plant and hectare affected by irrigation cut-off were 58 and 15%, respectively. Proline contents in irrigation cut-off treatment were about two times more than completely irrigatedtreatment. Khorasan and Kerman ecotypes had higher value in comparison with Esfahan in all studied traits.. Seed yield per hectare for Kerman, Khorasan and Esfahan ecotypes were 525, 306 and 525 kg, respectively. The highest essential oil yield (14.92 kg ha-1 was gained in 1 Mm spermidine for Khorasan ecotype and the lowest (6.87 kg ha-1 was observed in 0 Mm spermidine for Esfahan ecotype. There was no significant difference between foliar application levels in terms of the studied traits such as…. Conclusion: Irrigation cutoff at flowering stage caused a significant increase in seeds per umbel, infected plants and seed yield per plant and hectare Whereas harvest index, essential oil percentage and yield and proline contents were higher in irrigation cutoff treatment compared to completely irrigated treatment. Khorasan and Kerman ecotypes achieved higher potential for cultivation in Kerman climate condition compared to Esfahan ecotype.

  9. Improving the Vase life of Cut Carnation ‘Tempo’ (Dianthus carryophyllusL. Flower by Silver Thiosulphate and Silver Nano-Particles

    Directory of Open Access Journals (Sweden)

    D. Hashemabadi

    2014-08-01

    Full Text Available Nanometer-sized silver particle can be act as an anti-microbial compound. Thus, in this research, the efficacy of silver thiosulphate and silver nano-particles as antimicrobial agents in extending the vase-life of cut carnation flowers was evaluated. A factorial experiment carried out based on randomized completely blocks design with two factors: silver thiosulphate (0, 0.1, 0.2 and 0.3 mM and silver nano-particles (0, 5, 10 and 15 mg/L. Mean comparison of the data showed that the combined treatments of 0.3 mM silver thiosulphate + 15 mg/L silver nano-particles had the highest vase life, water uptake and super oxide dismutase enzyme. Thus, the mentioned above treatment was proposed to increase prolong vase life and improvement of water relations and control of stem end blockage. Based to results of this study, silver thiosulphate and silver nano-particles can be used for increasing postharvest longevity of cut carnation "Tempo".

  10. ACTIVITY OF LEAF-CUTTING ANT Atta sexdens piriventris SUBMITED TO HIGH DILUTION HOMEOPATHIC PREPARATIONS

    Directory of Open Access Journals (Sweden)

    Alexandre Giesel

    2013-02-01

    Full Text Available The effect of high dilution preparations on the movement and foraging activities of Atta sexdens piriventris was evaluated. Five colonies of ants were located on each of the five experimental areas using a randomized complete block design. Three main forage trails from each colony were selected from where evaluations were made. Ten mL of high dilution preparation of Atta sexdens piriventris nosodes and Belladonna homeopathy solution were sprayed over 0.5 m of each selected trail, 1.0 m far from the nest. The controls were pure water and non treated trails. Applications were made daily during 10 days. The total number of ants moving on each trail one meter away from the nest, carrying or not plant fragments, were assessed before the daily application. Dilution preparations at 30CH (thirtieth centesimal Hahnemannian dilution of A. sexdens piriventris nosodes and Belladonna reduced the activities of ants from the fifth day after the first application. The treatment effect lasted more than 20 days after the last application. The use of preparation at 30CH dilution order to reduce the foraging activity of leaf-cutting ants is a potential non residual method to manage leaf-cutting ants.

  11. Electron-beam irradiation as a quarantine treatment against red mite on exported cut flower of Chrysanthemum

    International Nuclear Information System (INIS)

    Doan Thi The; Nguyen Thi Ly; Vo Thi Kim Lang; Cao Van Chung

    2016-01-01

    Utilization of phytosanitary irradiation as a potential treatment to disinfest agricultural commodities in trade has expanded rapidly in the recent years. In this study, red mites (Tetranychus sp) isolated from cut Chrysanthemums were treated by electron beam irradiation at doses of 100, 200, 300 and 400 Gy. After irradiation, they were kept at room temperature to determine the effects of electron beam irradiation on red mite at different developmental stages (eggs, nymphs and adults) and the reproduction of female adults. The results showed that the pattern of tolerance to irradiation in red mite was eggs < 2nd instars < adults, in which the adults were the most tolerance stage. The number of eggs laid by the irradiated female mites and the hatching rate significantly decreased when the irradiation dose increased. The hatching rate of eggs at 300 Gy was 4.25% and no larvae F_1 survived during observation time. It could be concluded that 300 Gy is the effective quarantine dose for red mite infesting on cut chrysanthemums. (author)

  12. The effects of different irrigation levels on flowering and flower ...

    African Journals Online (AJOL)

    ajl yemi

    2011-10-26

    Oct 26, 2011 ... important export production in cut flower is carnation and it consists of 89% of cut flower export. ... irrigation management in arid and semi-arid regions will shift from emphasizing ..... Handbook of Plant and Crop. Stress (Ed: M.

  13. Effect of Ethanol and Essential Oils on Extending Vase-life of Carnation Cut Flower (Dianthus caryophyllus cv. �Yellow Candy�

    Directory of Open Access Journals (Sweden)

    Hassan BAYAT

    2011-11-01

    Full Text Available The aim of the present study was to evaluate the effects of ethanol and essential oils of three medicinal plants namely Thyme (Thymus vulgaris L., Summer savory (Satureja hortensis L. and Ajwain (Carum copticum L. on extending carnation (Dianthus caryophyllus vase-life. For this purpose three individual trials were conducted using a completely randomized block design with three replications. In the first trial, the effect of 4% ethanol (v/v as a continuous or pulse treatment was determined. The results showed that although both application methods increased vase-life and marketability of carnation, it was statistically non significant. In the second trial, the effects of selected essential oils at the concentration of 100, 150 and 200 ppm were investigated. All essential oils prolonged carnation vase-life. Summer savory essential oil (100 ppm showed the highest effect (increasing 4.4 days in comparison to the control. In the third trial, the interaction between ethanol and the essential oils was studied. Results showed there is no significant difference between application of essential oils alone and in combination with ethanol. The highest fresh weight was observed in cut flowers treated with Summer savory essential oil at 100 ppm after 6 days which was double compared to the control. According to the results of this research it is concluded that essential oils, (natural, safe and biodegradable compounds as novel alternative materials are suitable for prolongation of carnation vase-life.

  14. Cutting efficiency of apical preparation using ultrasonic tips with microprojections: confocal laser scanning microscopy study

    Directory of Open Access Journals (Sweden)

    Sang-Won Kwak

    2014-11-01

    Full Text Available Objectives The purpose of this study was to compare the cutting efficiency of a newly developed microprojection tip and a diamond-coated tip under two different engine powers. Materials and Methods The apical 3-mm of each root was resected, and root-end preparation was performed with upward and downward pressure using one of the ultrasonic tips, KIS-1D (Obtura Spartan or JT-5B (B&L Biotech Ltd.. The ultrasonic engine was set to power-1 or -4. Forty teeth were randomly divided into four groups: K1 (KIS-1D / Power-1, J1 (JT-5B / Power-1, K4 (KIS-1D / Power-4, and J4 (JT-5B / Power-4. The total time required for root-end preparation was recorded. All teeth were resected and the apical parts were evaluated for the number and length of cracks using a confocal scanning micrscope. The size of the root-end cavity and the width of the remaining dentin were recorded. The data were statistically analyzed using two-way analysis of variance and a Mann-Whitney test. Results There was no significant difference in the time required between the instrument groups, but the power-4 groups showed reduced preparation time for both instrument groups (p < 0.05. The K4 and J4 groups with a power-4 showed a significantly higher crack formation and a longer crack irrespective of the instruments. There was no significant difference in the remaining dentin thickness or any of the parameters after preparation. Conclusions Ultrasonic tips with microprojections would be an option to substitute for the conventional ultrasonic tips with a diamond coating with the same clinical efficiency.

  15. Cutting efficiency of apical preparation using ultrasonic tips with microprojections: confocal laser scanning microscopy study.

    Science.gov (United States)

    Kwak, Sang-Won; Moon, Young-Mi; Yoo, Yeon-Jee; Baek, Seung-Ho; Lee, WooCheol; Kim, Hyeon-Cheol

    2014-11-01

    The purpose of this study was to compare the cutting efficiency of a newly developed microprojection tip and a diamond-coated tip under two different engine powers. The apical 3-mm of each root was resected, and root-end preparation was performed with upward and downward pressure using one of the ultrasonic tips, KIS-1D (Obtura Spartan) or JT-5B (B&L Biotech Ltd.). The ultrasonic engine was set to power-1 or -4. Forty teeth were randomly divided into four groups: K1 (KIS-1D / Power-1), J1 (JT-5B / Power-1), K4 (KIS-1D / Power-4), and J4 (JT-5B / Power-4). The total time required for root-end preparation was recorded. All teeth were resected and the apical parts were evaluated for the number and length of cracks using a confocal scanning micrscope. The size of the root-end cavity and the width of the remaining dentin were recorded. The data were statistically analyzed using two-way analysis of variance and a Mann-Whitney test. There was no significant difference in the time required between the instrument groups, but the power-4 groups showed reduced preparation time for both instrument groups (p < 0.05). The K4 and J4 groups with a power-4 showed a significantly higher crack formation and a longer crack irrespective of the instruments. There was no significant difference in the remaining dentin thickness or any of the parameters after preparation. Ultrasonic tips with microprojections would be an option to substitute for the conventional ultrasonic tips with a diamond coating with the same clinical efficiency.

  16. Specimen preparation by ion beam slope cutting for characterization of ductile damage by scanning electron microscopy.

    Science.gov (United States)

    Besserer, Hans-Bernward; Gerstein, Gregory; Maier, Hans Jürgen; Nürnberger, Florian

    2016-04-01

    To investigate ductile damage in parts made by cold sheet-bulk metal forming a suited specimen preparation is required to observe the microstructure and defects such as voids by electron microscopy. By means of ion beam slope cutting both a targeted material removal can be applied and mechanical or thermal influences during preparation avoided. In combination with scanning electron microscopy this method allows to examine voids in the submicron range and thus to analyze early stages of ductile damage. In addition, a relief structure is formed by the selectivity of the ion bombardment, which depends on grain orientation and microstructural defects. The formation of these relief structures is studied using scanning electron microscopy and electron backscatter diffraction and the use of this side effect to interpret the microstructural mechanisms of voids formation by plastic deformation is discussed. A comprehensive investigation of the suitability of ion beam milling to analyze ductile damage is given at the examples of a ferritic deep drawing steel and a dual phase steel. © 2016 Wiley Periodicals, Inc.

  17. Application of gamma irradiation on eggs, active and quiescence stages of Tetranychus urticae Koch as a quarantine treatment of cut flowers

    International Nuclear Information System (INIS)

    Osouli, Sh.; Ziaie, F.; Haddad Irani Nejad, K.; Moghaddam, M.

    2013-01-01

    Tetranychus urticae Koch (Tetranychidae) is amongst the most serious pests of cut flowers and ornamentals. In this research the effects of gamma irradiation on different biological stages (including quiescent stages) of this pest have been studied. Irradiation at the doses of 250, 250, 200, 250, 200, 350 and 300 Gy causes sterility of females who were able to reach to adult stage from eggs, larva, protochrysalis, protonymph, deutochrysalis, deutonymph and teliochrysalis stages, respectively. The irradiation caused a decrease in percentage of mites entering the adult stage, developed the adult mite‘s longevity, number of laid eggs per adult female emerged from irradiated immature stages, and finally a retardation of embryonic and post-embryonic development. The sex ratio of the adult mites resulted from irradiated immature stages was biased towards females through increase of dose. The adult mites developed from irradiated two-day old eggs, three-day old eggs, larva, protochrysalis and deutochrysalis at 100, 350, 300, 350 and 350 Gy, respectively, were 100% females. In general the females resulted from irradiated quiescent stages have shown a high sensitivity to characteristics like eggs hatchability percentage and the emerged adult's sex ratio. On the other hand with regard to percentage of immature mites developed to adult stages, longevity of adult males and females, number of eggs laid by females and the time needed to complete their development, teliochrysalis has been the most tolerant stage. Also a 300 Gy dose could cause sterility in females irradiated at deutonymph stage and mated with adult males irradiated before mating and prevent their eggs to be hatched. In conclusion the most tolerance stages of this mite for most of characteristics was generally the most developed ones and a dose of around 300 Gy could be a phytosanitary irradiation treatment for Tetranychus urticae Koch. - Highlights: • The effects of γ-radiation on embryonic stages of

  18. Volatility-dependent 2D IR correlation analysis of traditional Chinese medicine ‘Red Flower Oil’ preparation from different manufacturers

    Science.gov (United States)

    Wu, Yan-Wen; Sun, Su-Qin; Zhou, Qun; Tao, Jia-Xun; Noda, Isao

    2008-06-01

    As a traditional Chinese medicine (TCM), 'Red Flower Oil' preparation is widely used as a household remedy in China and Southeast Asia. Usually, the preparation is a mixture of several plant essential oils with different volatile features, such as wintergreen oil, turpentine oil and clove oil. The proportions of these plant essential oils in 'Red Flower Oil' vary from different manufacturers. Thus, it is important to develop a simple and rapid evaluation method for quality assurance of the preparations. Fourier transform infrared (FT-IR) was applied and two-dimensional correlation infrared spectroscopy (2D IR) based on the volatile characteristic of samples was used to enhance the resolution of FT-IR spectra. 2D IR technique could, not only easily provide the composition and their volatile sequences in 'Red flower Oil' preparations, but also rapidly discriminate the subtle differences in products from different manufacturers. Therefore, FT-IR combined with volatility-dependent 2D IR correlation analysis provides a very fast and effective method for the quality control of essential oil mixtures in TCM.

  19. The effects of different irrigation levels on flowering and flower ...

    African Journals Online (AJOL)

    Water usage is a vital issue for all agricultural crops as well as for ornamental crops. To obtain high quality flowers, it is essential to supply water when it is required. A problem which is common with cut flower growers are determining when to irrigate and the amount of water to apply. The effect of two irrigation intervals (I1: ...

  20. Differential effects of NAA and 2,4-D in reducing floret abscission in cestrum (Cestrum elegans) cut flowers are associated with their differential activation of Aux/IAA homologous genes.

    Science.gov (United States)

    Abebie, Bekele; Lers, Amnon; Philosoph-Hadas, Sonia; Goren, Raphael; Riov, Joseph; Meir, Shimon

    2008-01-01

    A previous study showed that the relative effectiveness of 2,4-dichlorophenoxyacetic acid (2,4-D) compared with that of 1-naphthaleneacetic acid (NAA) in reducing floret bud abscission in cestrum (Cestrum elegans) cut flowers was due to its acropetal transport. The aim of the present study was to examine if the differential effect of these auxins on floret abscission is reflected in the expression of Aux/IAA genes in the floret abscission zone (AZ). cDNAs were isolated by PCR-based cloning from the floret AZ of auxin-treated cut flowers. The expression patterns of the cDNAs in various tissues and the effect of indole-3-acetic acid (IAA), applied with or without cycloheximide, on their expression in the floret AZ were examined by northern blot analysis. The regulation of transcript accumulation in the floret AZ in response to NAA or 2,4-D was measured by real-time PCR during auxin pulsing of cut flowers and vase life, concomitantly with floret abscission. Six isolated cDNAs were identified to represent Aux/IAA homologous genes, designated as Cestrum elegans (Ce)-IAA1 to Ce-IAA6. Four Ce-IAA genes were characterized as early auxin-responsive genes (ARGs), and two (Ce-IAA1 and Ce-IAA5) as late ARGs. Only Ce-IAA5 was AZ-specific in floret buds. A temporal regulation of Ce-IAA transcript levels in the floret AZ was found, with 2,4-D inducing higher expression levels than NAA in floret buds. These Ce-IAA expression levels were negatively correlated with floret abscission. The differential transport characteristics of NAA and 2,4-D in cestrum cut flowers were reflected in differential activation of the Ce-IAA genes identified in the floret AZ. Therefore, Aux/IAA genes can be used as molecular markers to measure auxin activity, which reflects free auxin level in the AZ. Two of the identified genes, Ce-IAA1 and Ce-IAA5, may also have a regulatory role in abscission.

  1. Modeling transfer of Escherichia coli O157:H7 and Listeria monocytogenes during preparation of fresh-cut salads: impact of cutting and shredding practices.

    Science.gov (United States)

    Zilelidou, Evangelia A; Tsourou, Virginia; Poimenidou, Sofia; Loukou, Anneza; Skandamis, Panagiotis N

    2015-02-01

    Cutting and shredding of leafy vegetables increases the risk of cross contamination in household settings. The distribution of Escherichia coli O157:H7 and Listeria monocytogenes transfer rates (Tr) between cutting knives and lettuce leaves was investigated and a semi-mechanistic model describing the bacterial transfer during consecutive cuts of leafy vegetables was developed. For both pathogens the distribution of log10Trs from lettuce to knife was towards low values. Conversely log10Trs from knife to lettuce ranged from -2.1 to -0.1 for E. coli O157:H7 and -2.0 to 0 for L. monocytogenes, and indicated a more variable phenomenon. Regarding consecutive cuts, a rapid initial transfer was followed by an asymptotic tail at low populations moving to lettuce or residing on knife. E. coli O157:H7 was transferred at slower rates than L. monocytogenes. These trends were sufficiently described by the transfer-model, with RMSE values of 0.426-0.613 and 0.531-0.908 for L. monocytogenes and E. coli O157:H7, respectively. The model showed good performance in validation trials but underestimated bacterial transfer during extrapolation experiments. The results of the study can provide information regarding cross contamination events in a common household. The constructed model could be a useful tool for the risk-assessment during preparation of leafy-green salads. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Flowering T Flowering Trees

    Indian Academy of Sciences (India)

    Adansonia digitata L. ( The Baobab Tree) of Bombacaceae is a tree with swollen trunk that attains a dia. of 10m. Leaves are digitately compound with leaflets up to 18cm. long. Flowers are large, solitary, waxy white, and open at dusk. They open in 30 seconds and are bat pollinated. Stamens are many. Fruit is about 30 cm ...

  3. Preparation of Road Cuts by Usage of Drilling and Blasting Works

    OpenAIRE

    Dambov, Risto; Mijoski, Goran; Karanakova Stefanovska, Radmila

    2011-01-01

    This paper shows the basic methods of blasting in the construction of the (one-sided and double sided) road cuts in hilly terrain with different inclinations. By applying of these methods we get stable slopes of manufactured road cuts, minimal (or no) damage of the rest solid rocks. It is important to emphasize that the stable and undeformed slopes of the road cuts, to avoid the additional work of restoration and protection of slopes from landslides on the road. The application of these...

  4. Preparation of pre-cut corneas from fresh donated whole globes for Descemet's stripping automated keratoplasty: 3-year results at the Central Eye Bank of Iran.

    Science.gov (United States)

    Kanavi, Mozhgan Rezaei; Javadi, Mohammad Ali; Javadi, Fatemeh; Chamani, Tahereh

    2014-09-01

    To describe the technique and the results of the preparation of pre-cut corneas for Descemet's stripping automated endothelial keratoplasty (DSAEK) during a 3-year period at the Central Eye Bank of Iran (CEBI). The method of preparation of pre-cut corneas from donated whole globes at the CEBI is described and the frequency and percentage of pre-cut corneas prepared for DSAEK, between April 2009 and March 2012, are specified. Moreover, post-operative reports are reviewed for any complaints about using pre-cut tissues for DSAEK. Out of the 1,518 donated whole globes appropriate for DSAEK, 1,478 (97.4 %) pre-cut corneas were successfully prepared. The method of preparation failed in 40 (2.6 %) cases. Based on the eye bank post-operative reports, thickness of pre-cut tissues for DSAEK was deemed unacceptable in only 6 (0.4 %) cases prior to surgery; five of these were too thick and one was too thin. Preparation of pre-cut corneas, for DSAEK from donated whole globes, in the CEBI is a safe and easy method, with very good preservation of endothelial cells after the preparation of the pre-cut corneas and reduced risks from corneal manipulation.

  5. Preparation of CuIn1-xGaxS2 (x = 0.5) flowers consisting of nanoflakes via a solvothermal method

    International Nuclear Information System (INIS)

    Liang Xiaojuan; Zhong Jiasong; Yang Fan; Hua Wei; Jin Huaidong; Liu Haitao; Sun Juncai; Xiang Weidong

    2011-01-01

    Highlights: → We report for the first time a small biomolecule-assisted route using L-cysteine as sulfur source and complexing agent to synthesis CuIn 0.5 Ga 0.5 S 2 crystals. → The possible mechanisms leading to CuIn 0.5 Ga 0.5 S 2 flowers consisting of nanoflakes were proposed. → In addition, the morphology, structure, and phase composition of the as-prepared CuIn 0.5 Ga 0.5 S 2 products were investigated in detail by XRD, FESEM, EDS, XPS, TEM (HRTEM) and SAED. - Abstract: CuIn 1-x Ga x S 2 (x = 0.5) flowers consisting of nanoflakes were successfully prepared by a biomolecule-assisted solvothermal route at 220 deg. C for 10 h, employing copper chloride, gallium chloride, indium chloride and L-cysteine as precursors. The biomolecule L-cysteine acting as sulfur source was found to play a very important role in the formation of the final product. The diameter of the CuIn 0.5 Ga 0.5 S 2 flowers was 1-2 μm, and the thickness of the flakes was about 15 nm. The obtained products were characterized by X-ray diffraction (XRD), energy dispersion spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction spectroscopy (SAED), and UV-vis absorption spectroscopy. The influences of the reaction temperature, reaction time, sulfur source and the molar ratio of Cu-to-L-cysteine (reactants) on the formation of the target compound were investigated. The formation mechanism of the CuIn 0.5 Ga 0.5 S 2 flowers consisting of flakes was discussed.

  6. Structural, optical and photocatalytic properties of flower-like ZnO nanostructures prepared by a facile wet chemical method

    Directory of Open Access Journals (Sweden)

    Sini Kuriakose

    2013-11-01

    Full Text Available Flower-like ZnO nanostructures were synthesized by a facile wet chemical method. Structural, optical and photocatalytic properties of these nanostructures have been studied by X-ray diffraction (XRD, scanning electron microscopy (SEM, transmission electron microscopy (TEM, photoluminescence (PL and UV–vis absorption spectroscopy. SEM and TEM studies revealed flower-like structures consisting of nanosheets, formed due to oriented attachment of ZnO nanoparticles. Flower-like ZnO structures showed enhanced photocatalytic activity towards sun-light driven photodegradation of methylene blue dye (MB as compared to ZnO nanoparticles. XRD, UV–vis absorption, PL, FTIR and TEM studies revealed the formation of Zn(OH2 surface layer on ZnO nanostructures upon ageing. We demonstrate that the formation of a passivating Zn(OH2 surface layer on the ZnO nanostructures upon ageing deteriorates their efficiency to photocatalytically degrade of MB.

  7. Blob Flowers.

    Science.gov (United States)

    Canfield, Elaine

    2003-01-01

    Describes an art project called blob flowers in which fifth-grade students created pictures of flowers using watercolor and markers. Explains that the lesson incorporates ideas from art and science. Discusses in detail how the students created their flowers. (CMK)

  8. Flowering Trees

    Indian Academy of Sciences (India)

    IAS Admin

    Flowering Trees. Ailanthus excelsa Roxb. (INDIAN TREE OF. HEAVEN) of Simaroubaceae is a lofty tree with large pinnately compound alternate leaves, which are ... inflorescences, unisexual and greenish-yellow. Fruits are winged, wings many-nerved. Wood is used in making match sticks. 1. Male flower; 2. Female flower.

  9. Flowering Trees

    Indian Academy of Sciences (India)

    user

    Flowering Trees. Gliricidia sepium(Jacq.) Kunta ex Walp. (Quickstick) of Fabaceae is a small deciduous tree with. Pinnately compound leaves. Flower are prroduced in large number in early summer on terminal racemes. They are attractive, pinkish-white and typically like bean flowers. Fruit is a few-seeded flat pod.

  10. Flowering Trees

    Indian Academy of Sciences (India)

    More Details Fulltext PDF. Volume 8 Issue 8 August 2003 pp 112-112 Flowering Trees. Zizyphus jujuba Lam. of Rhamnaceae · More Details Fulltext PDF. Volume 8 Issue 9 September 2003 pp 97-97 Flowering Trees. Moringa oleifera · More Details Fulltext PDF. Volume 8 Issue 10 October 2003 pp 100-100 Flowering Trees.

  11. Functional anatomy of the water transport system in cut chrysanthemum

    NARCIS (Netherlands)

    Nijsse, J.

    2001-01-01

    Cut flowers show a wide variance of keepability. The market demands more and more a guaranteed quality. Therefore, methods must be developed to predict vase life of cut flowers. Chrysanthemum ( Dendranthema x grandiflorum Tzvelev) and some other cut flowers suffer from

  12. Using a cut-paste method to prepare a carbon nanotube fur electrode

    International Nuclear Information System (INIS)

    Zhang, H; Cao, G P; Yang, Y S

    2007-01-01

    We describe and realize an aligned carbon nanotube array based 'carbon nanotube fur (CNTF)' electrode. We removed an 800 μm long aligned carbon nanotube array from the silica substrate, and then pasted the array on a nickel foam current collector to obtain a CNTF electrode. CNTF's characteristics and electrochemical properties were studied systemically in this paper. The cut-paste method is simple, and does not damage the microstructure of the aligned carbon nanotube array. The CNTF electrode obtained a specific capacitance of 14.1 F g -1 and excellent rate capability

  13. Preparation of CuIn{sub 1-x}Ga{sub x}S{sub 2} (x = 0.5) flowers consisting of nanoflakes via a solvothermal method

    Energy Technology Data Exchange (ETDEWEB)

    Liang Xiaojuan [College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang Province 325035 (China); Institute of Materials and Technology, Dalian Maritime University, Dalian 116026 (China); Zhong Jiasong; Yang Fan; Hua Wei; Jin Huaidong [College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang Province 325035 (China); Liu Haitao, E-mail: lht@wzu.edu.cn [College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang Province 325035 (China); Sun Juncai [Institute of Materials and Technology, Dalian Maritime University, Dalian 116026 (China); Xiang Weidong, E-mail: weidongxiang@yahoo.com.cn [College of Chemistry and Materials Engineering, Wenzhou University, Wenzhou, Zhejiang Province 325035 (China)

    2011-05-26

    Highlights: > We report for the first time a small biomolecule-assisted route using L-cysteine as sulfur source and complexing agent to synthesis CuIn{sub 0.5}Ga{sub 0.5}S{sub 2} crystals. > The possible mechanisms leading to CuIn{sub 0.5}Ga{sub 0.5}S{sub 2} flowers consisting of nanoflakes were proposed. > In addition, the morphology, structure, and phase composition of the as-prepared CuIn{sub 0.5}Ga{sub 0.5}S{sub 2} products were investigated in detail by XRD, FESEM, EDS, XPS, TEM (HRTEM) and SAED. - Abstract: CuIn{sub 1-x}Ga{sub x}S{sub 2} (x = 0.5) flowers consisting of nanoflakes were successfully prepared by a biomolecule-assisted solvothermal route at 220 deg. C for 10 h, employing copper chloride, gallium chloride, indium chloride and L-cysteine as precursors. The biomolecule L-cysteine acting as sulfur source was found to play a very important role in the formation of the final product. The diameter of the CuIn{sub 0.5}Ga{sub 0.5}S{sub 2} flowers was 1-2 {mu}m, and the thickness of the flakes was about 15 nm. The obtained products were characterized by X-ray diffraction (XRD), energy dispersion spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction spectroscopy (SAED), and UV-vis absorption spectroscopy. The influences of the reaction temperature, reaction time, sulfur source and the molar ratio of Cu-to-L-cysteine (reactants) on the formation of the target compound were investigated. The formation mechanism of the CuIn{sub 0.5}Ga{sub 0.5}S{sub 2} flowers consisting of flakes was discussed.

  14. Assessment of the internal quality of stored flower bulbs using magnetic resonance imaging

    NARCIS (Netherlands)

    Kilsdonk, Maria Gerarda van

    2002-01-01

    Many flower bulbs have a life cycle of a year or more, flowering either in spring or in summer. Nevertheless, year-round production of cut flowers has become common practice in horticulture. To control flowering, which is necessary for the year-round production of flowers, bulbs are exposed to

  15. Flowering Trees

    Indian Academy of Sciences (India)

    Canthium parviflorum Lam. of Rubiaceae is a large shrub that often grows into a small tree with conspicuous spines. Leaves are simple, in pairs at each node and are shiny. Inflorescence is an axillary few-flowered cymose fascicle. Flowers are small (less than 1 cm across), 4-merous and greenish-white. Fruit is ellipsoid ...

  16. Flowering Trees

    Indian Academy of Sciences (India)

    mid-sized slow-growing evergreen tree with spreading branches that form a dense crown. The bark is smooth, thick, dark and flakes off in large shreds. Leaves are thick, oblong, leathery and bright red when young. The female flowers are drooping and are larger than male flowers. Fruit is large, red in color and velvety.

  17. Flowering Trees

    Indian Academy of Sciences (India)

    narrow towards base. Flowers are large and attrac- tive, but emit unpleasant foetid smell. They appear in small numbers on erect terminal clusters and open at night. Stamens are numerous, pink or white. Style is slender and long, terminating in a small stigma. Fruit is green, ovoid and indistinctly lobed. Flowering Trees.

  18. Flowering Trees

    Indian Academy of Sciences (India)

    Flowering Trees. Gyrocarpus americanus Jacq. (Helicopter Tree) of Hernandiaceae is a moderate size deciduous tree that grows to about 12 m in height with a smooth, shining, greenish-white bark. The leaves are ovate, rarely irregularly ... flowers which are unpleasant smelling. Fruit is a woody nut with two long thin wings.

  19. Flowering Trees

    Indian Academy of Sciences (India)

    Flowering Trees. Acrocarpus fraxinifolius Wight & Arn. (PINK CEDAR, AUSTRALIAN ASH) of. Caesalpiniaceae is a lofty unarmed deciduous native tree that attains a height of 30–60m with buttresses. Bark is thin and light grey. Leaves are compound and bright red when young. Flowers in dense, erect, axillary racemes.

  20. Preparation of flower-like TiO{sub 2} sphere/reduced graphene oxide composites for photocatalytic degradation of organic pollutants

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Tae-Woong [Department of Chemistry, Inha University, 100 Inharo, Incheon 402-751 (Korea, Republic of); Park, Mira [Department of Organic Materials and Fiber Engineering, Chonbuk National University, Jeonju 561-756 (Korea, Republic of); Kim, Hak Yong [Department of BIN Convergence technology, Chonbuk National University, Jeonju 561-756 (Korea, Republic of); Park, Soo-Jin, E-mail: sjpark@inha.ac.kr [Department of Chemistry, Inha University, 100 Inharo, Incheon 402-751 (Korea, Republic of)

    2016-07-15

    In this study, novel flower-like TiO{sub 2} sphere (FTS)/reduced graphene oxide (rGO) composites (FTS-G) were synthesized via a hydrothermal method. The photocatalytic performance of the FTS-G composites was evaluated through the photodegradation of rhodamine B (Rh B) and trichloroethylene (TCE) under simulated solar light irradiation. The rGO to FTS ratio in the composites significantly affected photocatalytic activity. The photocatalytic activities of FTS-Gs in the degradation of Rh B and TCE were superior to that of pure FTS. Of all the FTS-G composites tested, FTS-G with 1 wt% rGO (FTS-G-1) had the greatest photocatalytic activity, while FTS-G composites with rGO contents over 1 wt% had lower photocatalytic activities. Additionally, it is expected that the synthesis of FTS with a high specific surface area and well-developed pore structure and simultaneous conversion of GO to graphene-like rGO without the use of strong reducing agents could be a promising strategy to prepare other carbon-based flower-like TiO{sub 2} sphere composite photocatalysts. - Graphical abstract: Schematic illustration of high photocatalytic activity for FTS-G composites. Display Omitted.

  1. Dye sensitized photoelectrochemical immunosensor for the tumor marker CEA by using a flower-like 3D architecture prepared from graphene oxide and MoS2.

    Science.gov (United States)

    Song, Kaijing; Ding, Chuanmin; Zhang, Bing; Chang, Honghong; Zhao, Zhihuan; Wei, Wenlong; Wang, Junwen

    2018-06-01

    The authors describe a dye-sensitized photoelectrochemical immunoassay for the tumor marker carcinoembryonic antigen (CEA). The method employs the rhodamine dye Rh123 with red color and absorption maximum at 500 nm for spectral sensitization, and a 3D nanocomposite prepared from graphene oxide and MoS 2 acting as the photoelectric conversion layer. The nanocomposite with flower-like 3D architectures was characterized by transmission electron microscopy, scanning electron microscopy, X-ray powder diffraction, and UV-vis diffuse reflectometry. A photoelectrochemical sandwich immunoassay was developed that is based on the use of the nanocomposite and based on the specific binding of antibody and antigen, and by using a secondary antibody labeled with Rh123 and CdS (Ab 2 -Rh123@CdS). Under optimal conditions and at a typical working voltage of 0 V (vs. Hg/HgCl 2 ), the photocurrent increases linearly 10 pg mL -1 to 80 ng mL -1 CEA concentration range, with a 3.2 pg mL -1 detection limit. Graphical abstract Flower-like GO-MoS 2 complex with high efficiency of electron transport was synthesized to construct photoelectrochemical platform. The sandwich-type immunoassay was built on this platform based on specific binding of antigen and antibody. Carcinoembryonic antigen in sample was detected sensitively by using sensitization of rhodamine dye Rh123 as signal amplification strategy.

  2. The effect of flowering on adventitious root-formation

    NARCIS (Netherlands)

    Selim, H.H.A.

    1956-01-01

    The rooting of cuttings from day-neutral tomato was not influenced by flower development, nor by SD or LD treatments of them or of the mother plants. In cuttings of the SD plant Perilla crispa flower initiation and development severely inhibited rooting. Leaves produced about 61 %

  3. Flower morphology of Dendrobium Sonia mutants

    International Nuclear Information System (INIS)

    Sakinah Ariffin; Azhar Mohamad; Affrida Abu Hassan; Zaiton Ahmad; Mohd Nazir Basiran

    2010-01-01

    Dendrobium Sonia is a commercial hybrid which is popular as cut flower and potted plant in Malaysia. Variability in flower is important for new variety to generate more demands and choices in selection. Mutation induction is a tool in creating variability for new flower color and shape. In vitro cultures of protocorm-like bodies (PLBs) were exposed to gamma ray at dose 35 Gy. Phenotypic characteristics of the flower were observed at fully bloomed flower with emphasis on shape and color. Approximately 2000 regenerated irradiated plants were observed and after subsequent flowering, 100 plants were finally selected for further evaluation. Most of the color and shape changes are expressed in different combinations of petal, sepal and lip of the flower. In this work, 11 stable mutants were found different at flower phenotype as compared to control. Amongst these, four mutant varieties with commercial potential has been named as Dendrobium 'SoniaKeenaOval', Dendrobium 'SoniaKeenaRadiant', Dendrobium 'SoniaKeenaHiengDing' and Dendrobium 'Sonia KeenaAhmadSobri'. In this paper, variations in flower morphology and flower color were discussed, giving emphasis on variations in flower petal shape. (author)

  4. Analysis of the learning curve for pre-cut corneal specimens in preparation for lamellar transplantation: a prospective, single-centre, consecutive case series prepared at the Lions New South Wales Eye Bank.

    Science.gov (United States)

    Martin, Aifric Isabel; Devasahayam, Rajnesh; Hodge, Christopher; Cooper, Simon; Sutton, Gerard L

    2017-09-01

    This study is the first paper to establish a learning curve by a single technician. Preparation of pre-cut corneal endothelial grafts commenced at Lions New South Wales Eye Bank in December 2014. The primary objective of this study was to review the safety and reliability of the preparation method during the first year of production. This is a hospital-based, prospective case series. There were 234 consecutive donor corneal lenticules. Donor lenticules were prepared by a single operator using a linear cutting microkeratome. Immediately prior to cutting, central corneal thickness values were recorded. Measurements of the corneal bed were taken immediately following lenticule preparation. Outcomes were separated by blade sizes, and intended thickness was compared to actual thickness for each setting. Early specimens were compared to later ones to assess for a learning curve within the technique. The main parameter measured is the mean difference from intended lamellar cut thickness. The mean final cut thickness was 122.36 ± 20.35 μm, and the mean difference from intended cut was 30.17 ± 37.45 μm. No significant difference was found between results achieved with early specimens versus those achieved with later specimens (P = 0.425). Thin, reproducible endothelial grafts can routinely be produced by trained technicians at their respective eye banks without significant concerns for an extended learning curve. This service can reduce perioperative surgical complexity, required surgical paraphernalia and theatre times. The consistent preparation of single-pass, ultrathin pre-cut corneas may have additional advantages for surgeons seeking to introduce lamellar techniques. © 2017 Royal Australian and New Zealand College of Ophthalmologists.

  5. Flowering Trees

    Indian Academy of Sciences (India)

    deciduous tree with irregularly-shaped trunk, greyish-white scaly bark and milky latex. Leaves in opposite pairs are simple, oblong and whitish beneath. Flowers that occur in branched inflorescence are white, 2–. 3cm across and fragrant. Calyx is glandular inside. Petals bear numerous linear white scales, the corollary.

  6. Flowering Trees

    Indian Academy of Sciences (India)

    Flowering Trees. Boswellia serrata Roxb. ex Colebr. (Indian Frankincense tree) of Burseraceae is a large-sized deciduous tree that is native to India. Bark is thin, greenish-ash-coloured that exfoliates into smooth papery flakes. Stem exudes pinkish resin ... Fruit is a three-valved capsule. A green gum-resin exudes from the ...

  7. Flowering Trees

    Indian Academy of Sciences (India)

    Berrya cordifolia (Willd.) Burret (Syn. B. ammonilla Roxb.) – Trincomali Wood of Tiliaceae is a tall evergreen tree with straight trunk, smooth brownish-grey bark and simple broad leaves. Inflorescence is much branched with white flowers. Stamens are many with golden yellow anthers. Fruit is a capsule with six spreading ...

  8. Flowering Trees

    Indian Academy of Sciences (India)

    sriranga

    Hook.f. ex Brandis (Yellow. Cadamba) of Rubiaceae is a large and handsome deciduous tree. Leaves are simple, large, orbicular, and drawn abruptly at the apex. Flowers are small, yellowish and aggregate into small spherical heads. The corolla is funnel-shaped with five stamens inserted at its mouth. Fruit is a capsule.

  9. Flowering Trees

    Indian Academy of Sciences (India)

    Celtis tetrandra Roxb. of Ulmaceae is a moderately large handsome deciduous tree with green branchlets and grayish-brown bark. Leaves are simple with three to four secondary veins running parallel to the mid vein. Flowers are solitary, male, female and bisexual and inconspicuous. Fruit is berry-like, small and globose ...

  10. Flowering Trees

    Indian Academy of Sciences (India)

    IAS Admin

    Aglaia elaeagnoidea (A.Juss.) Benth. of Meliaceae is a small-sized evergreen tree of both moist and dry deciduous forests. The leaves are alternate and pinnately compound, terminating in a single leaflet. Leaflets are more or less elliptic with entire margin. Flowers are small on branched inflorescence. Fruit is a globose ...

  11. Flowering Trees

    Indian Academy of Sciences (India)

    user

    Flowers are borne on stiff bunches terminally on short shoots. They are 2-3 cm across, white, sweet-scented with light-brown hairy sepals and many stamens. Loquat fruits are round or pear-shaped, 3-5 cm long and are edible. A native of China, Loquat tree is grown in parks as an ornamental and also for its fruits.

  12. Flowering Trees

    Indian Academy of Sciences (India)

    medium-sized handsome tree with a straight bole that branches at the top. Leaves are once pinnate, with two to three pairs of leaflets. Young parts of the tree are velvety. Inflorescence is a branched raceme borne at the branch ends. Flowers are large, white, attractive, and fragrant. Corolla is funnel-shaped. Fruit is an ...

  13. Flowering Trees

    Indian Academy of Sciences (India)

    Cassia siamia Lamk. (Siamese tree senna) of Caesalpiniaceae is a small or medium size handsome tree. Leaves are alternate, pinnately compound and glandular, upto 18 cm long with 8–12 pairs of leaflets. Inflorescence is axillary or terminal and branched. Flowering lasts for a long period from March to February. Fruit is ...

  14. Flowering Trees

    Indian Academy of Sciences (India)

    Andira inermis (wright) DC. , Dog Almond of Fabaceae is a handsome lofty evergreen tree. Leaves are alternate and pinnately compound with 4–7 pairs of leaflets. Flowers are fragrant and are borne on compact branched inflorescences. Fruit is ellipsoidal one-seeded drupe that is peculiar to members of this family.

  15. Flowering Trees

    Indian Academy of Sciences (India)

    Flowering Trees. Cerbera manghasL. (SEA MANGO) of Apocynaceae is a medium-sized evergreen coastal tree with milky latex. The bark is grey-brown, thick and ... Fruit is large. (5–10 cm long), oval containing two flattened seeds and resembles a mango, hence the name Mangas or. Manghas. Leaves and fruits contain ...

  16. Flowering Trees

    Indian Academy of Sciences (India)

    Muntingia calabura L. (Singapore cherry) of. Elaeocarpaceae is a medium size handsome ever- green tree. Leaves are simple and alternate with sticky hairs. Flowers are bisexual, bear numerous stamens, white in colour and arise in the leaf axils. Fruit is a berry, edible with several small seeds embedded in a fleshy pulp ...

  17. Flowering Trees

    Indian Academy of Sciences (India)

    Srimath

    Grevillea robusta A. Cunn. ex R. Br. (Sil- ver Oak) of Proteaceae is a daintily lacy ornamental tree while young and growing into a mighty tree (45 m). Young shoots are silvery grey and the leaves are fern- like. Flowers are golden-yellow in one- sided racemes (10 cm). Fruit is a boat- shaped, woody follicle.

  18. Flowering Trees

    Indian Academy of Sciences (India)

    stems and handsome foliage. Leaves are 8–10 cm long, dull green, the two thin leathery halves of the lamina fusing or the cleft between them extending beyond the middle. Flowers are gorgeous, axillary with dark purple stamens. The pod is more or less flat. B. alba is often named as B. variegate var. alba by botanists.

  19. Flowering Trees

    Indian Academy of Sciences (India)

    Guaiacum officinale L. (LIGNUM-VITAE) of Zygophyllaceae is a dense-crowned, squat, knobbly, rough and twisted medium-sized ev- ergreen tree with mottled bark. The wood is very hard and resinous. Leaves are compound. The leaflets are smooth, leathery, ovate-ellipti- cal and appear in two pairs. Flowers (about 1.5.

  20. Genetic and physiological aspects of postharvest flower longevity in Asiatic hybrid lilies (Lilium L.)

    NARCIS (Netherlands)

    Meulen-Muisers, van der J.J.M.

    2000-01-01

    In The Netherlands Lilium is economically the fourth overall flower crop for cut flower production. Longevity is a main quality characteristic for cut flowers. During postharvest handling of Asiatic hybrid lilies pretreatment with chemical solutions containing silver is

  1. Microbial safety and overall quality of cantaloupe fresh-cut pieces prepared from whole cantaloupe after wet steam treatment

    Science.gov (United States)

    Fresh-cut cantaloupes have been associated with outbreaks of Salmonelosis disease and the minimally processed fresh-cut fruits have a limited shelf life because of deterioration caused by spoilage microflora and physiological processes. In this study, we evaluated the effect of minimal wet steam t...

  2. Microbial safety and overall quality of cantaloupe fresh-cut pieces prepared from whole fruit after wet steam treatment

    Science.gov (United States)

    Fresh-cut cantaloupes have been associated with outbreaks of Salmonellosis. Minimally processed fresh-cut fruits have a limited shelf life because of deterioration caused by spoilage microflora and physiological processes. The objectives of this study were to use a wet steam process to 1) reduce ind...

  3. Silver ion chromatography for peak resolution enhancement: Application to the preparative separation of two sesquiterpenes using online heart-cutting LC-LC technique.

    Science.gov (United States)

    Yang, Yang; Zhang, Yongmin; Wei, Chong; Li, Jing; Sun, Wenji

    2018-09-01

    Silver ion chromatography, utilizing columns packed with silver ions bonded to silica gel, has proved to be an invaluable technique for the analysis of some positional isomers. In this work, silver ion chromatography by combination with online heart-cutting LC-LC technique for the preparative separation of two sesquiterpenes positional isomers from a natural product was investigated. On the basis of the evaluation that silver ion content impacts on the separation, the laboratory-made silver ion columns, utilizing silica gel impregnated with 15% silver nitrate as column packing materials, were used for peak resolution improvement of these two isomers and the preparative separation of them in heart-cutting LC-LC. The relationship among the maximal sample load, flow rate and peak resolution in the silver ion column were optimized, and the performance of the silver ion column was compared with conventional C 18 column and silica gel column. Based on the developed chromatographic conditions, online heart-cutting LC-LC chromatographic separation system in combination with a silica gel column and a silver ion column that was applied to preparative separation of these two isomers from a traditional Chinese medicine, Inula racemosa Hook.f., was established. The results showed that the online heart-cutting LC-LC technique by combination of a silica gel column and a silver ion column for the preparative separation of these two positional isomers from this natural plant was superior to the preparative separation performed on a single-column system with C 18 column or silica gel column. Copyright © 2018 Elsevier B.V. All rights reserved.

  4. Effect of cutting edge preparation on tool performance in hard-turning of DF-3 tool steel with ceramic tools

    International Nuclear Information System (INIS)

    Davoudinejad, A.; Noordin, M. Y.

    2014-01-01

    This study presents an experimental investigation on turning hardened DF-3 tool steel (∼ 58HRC) with PVD-TiN coated mixed ceramic. We focused on the effect of chamfer and honed edge geometry on tool wear, tool life, cutting forces and surface finish of the machined work piece. The effects of the process parameters on performance characteristics were investigated using ANOVA. It was found that longer tool life was recorded with chamfered edge geometry at various cutting conditions. The typical damage observed as flank and crater wear for ceramic tools and abrasive wear was found as the main mechanism.The optimal cutting speed was 155 m/min, with which a tolerable tool life and volume of material removal was obtained for both edges geometry. Finer machined surface was left by chamfered tool with feeds and speeds in the range of 0.125-0.05 mm/rev and 155-210 m/min, respectively; also, cutting forces decrease with increased cutting speed. The obtained consequence of cutting forces shows that tool wear has a considerable effect on cutting forces and greater forces values recorded with honed tools.

  5. Effect of cutting edge preparation on tool performance in hard-turning of DF-3 tool steel with ceramic tools

    Energy Technology Data Exchange (ETDEWEB)

    Davoudinejad, A.; Noordin, M. Y. [Universiti Teknologi Malaysia, Skudai (Malaysia)

    2014-11-15

    This study presents an experimental investigation on turning hardened DF-3 tool steel (∼ 58HRC) with PVD-TiN coated mixed ceramic. We focused on the effect of chamfer and honed edge geometry on tool wear, tool life, cutting forces and surface finish of the machined work piece. The effects of the process parameters on performance characteristics were investigated using ANOVA. It was found that longer tool life was recorded with chamfered edge geometry at various cutting conditions. The typical damage observed as flank and crater wear for ceramic tools and abrasive wear was found as the main mechanism.The optimal cutting speed was 155 m/min, with which a tolerable tool life and volume of material removal was obtained for both edges geometry. Finer machined surface was left by chamfered tool with feeds and speeds in the range of 0.125-0.05 mm/rev and 155-210 m/min, respectively; also, cutting forces decrease with increased cutting speed. The obtained consequence of cutting forces shows that tool wear has a considerable effect on cutting forces and greater forces values recorded with honed tools.

  6. Zingiber zerumbet flower stem postharvest characterization

    Directory of Open Access Journals (Sweden)

    Charleston Gonçalves

    2017-05-01

    Full Text Available About the Zingiber zerumbet little is known about its cut flower postharvest and market, despite its high ornamental potential. The inflorescences, which resemble a compact cone, emerge from the base of the plants and start with green color changing to red with the age. This study objective was to characterize floral stem of ornamental ginger in two cultivate conditions and to evaluate the longevity of those submitted to post-harvest treatments. Flower stems were harvest from clumps cultivated under full sun and partial shade area, and were submitted to the postharvest treatments: complete flower immersion in tap water (CFI or only the base stem immersion (BSI. The flower stems harvested from clumps at partial shade presented higher fresh weight, length and diameter of the inflorescences compared to flower stems harvested from clumps at full sun area. The flower stem bracts cultivated in full sun area changed the color from green to red 10.69 and 11.94 days after BSI and CFI postharvest treatments, and the vase life were 22.94 and 28.19 days, respectively. Flower stem harvest in partial shade area change the color only after 18.94 and 18.43 days and the vase life durability was 27.56 and 31.81, respectively. The complete immersion of the flower stem increase the vase life durability in 5.25 and 4.25 days compared to flowers kept with the stem base immersed only, in flower stems harvested from clumps cultivated in full sun area and partial shade area, respectively. Flower stems harvested from clumps cultivated in partial shade area and completely immerse in tap water during 3 hours increase the vase life durability in 8.87 days compared to flowers harvested from clumps cultivated in full sun area and base immersed only.

  7. Quantification of Campylobacter jejuni cross-contamination via hands, cutlery, and cutting board during preparation of a chicken fruit salad

    NARCIS (Netherlands)

    Verhoeff-Bakkenes, L.; Beumer, R.R.; Jonge, de R.; Leusden, van F.M.; Jong, de A.E.I.

    2008-01-01

    Using artificially contaminated chicken, the quantitative overall effect of Campylobacter jejuni cross-contamination, either via cutlery, cutting board, or hands, on the microbiological quality of a chicken salad was tested to identify the most critical transfer route. The end contamination level of

  8. Flowers and Landscape by Serendipity.

    Science.gov (United States)

    Pippin, Sandi

    2003-01-01

    Describes an art lesson in which students sketch drawings of flowers and use watercolor paper and other materials to paint a landscape. Explains that the students also learn about impressionism in this lesson. Discusses how the students prepare the paper and create their artwork. (CMK)

  9. Vase life of cut Lilium pumilum inflorescences with salicylic acid

    OpenAIRE

    Mirelle Nayana Santos; Márcia Martins Tolentino; Ana Maria Mapeli

    2018-01-01

    The demand for flowers and ornamental plants has significantly increased in recent years. However, in most cases, the production of such species is accompanied by inappropriate postharvest handling, which is responsible for significant losses of marketed flowers. Lilium pumilum, a member of the family Liliaceae, is one of the ornamental species with economic potential as potted or cut flower, which features long stalks containing orange inflorescences with several flower buds and numerous smo...

  10. Induced mutation altering flower colour in Chrysanthemum

    Energy Technology Data Exchange (ETDEWEB)

    Datta, S K [National Botanical Research Institute, Lucknow (India)

    1989-01-01

    Full text: 'Flirt' is a double Korean type, small flowered Chrysanthemum of red colour. Rooted cuttings were treated with 1.5-2.5 krad gamma rays. A chimeral flower colour mutant was detected after 1.5 krad treatment. After purification through repeated cuttings a mutant clone was developed and released as commercial cultivar 'Man Bhawan'. It produces bi-coloured flower-heads: yellow and red at full bloom stage becoming completely yellow later on. By chromatography, 6 pigment spots could be identified in the variety 'Flirt' but only 5 in the mutant, violet (hRf 69.83) being absent. Spectrophotometric analysis of petal extracts showed presence of three peaks in both 'Flirt' and 'Man Bhawan' at full bloom stage but only two in 'Man Bhawan' at fading stage. (author)

  11. Orchid flowers tolerance to gamma-radiation

    International Nuclear Information System (INIS)

    Kikuchi, Olivia Kimiko

    2000-01-01

    Cut flowers are fresh goods that may be treated with fumigants such as methyl bromide to meet the needs of the quarantine requirements of importing countries. Irradiation is a non-chemical alternative to substitute the methyl bromide treatment of fresh products. In this research, different cut orchids were irradiated to examine their tolerance to gamma-rays. A 200 Gy dose did inhibit the Dendrobium palenopsis buds from opening, but did not cause visible damage to opened flowers. Doses of 800 and 1000 Gy were damaging because they provoked the flowers to drop from the stem. Cattleya irradiated with 750 Gy did not show any damage, and were therefore eligible for the radiation treatment. Cymbidium tolerated up to 300 Gy and above this dose dropped prematurely. On the other hand, Oncydium did not tolerate doses above 150 Gy.(author)

  12. Orchid flowers tolerance to gamma-radiation

    Energy Technology Data Exchange (ETDEWEB)

    Kikuchi, Olivia Kimiko E-mail: okikuchi@net.ipen.br

    2000-03-01

    Cut flowers are fresh goods that may be treated with fumigants such as methyl bromide to meet the needs of the quarantine requirements of importing countries. Irradiation is a non-chemical alternative to substitute the methyl bromide treatment of fresh products. In this research, different cut orchids were irradiated to examine their tolerance to gamma-rays. A 200 Gy dose did inhibit the Dendrobium palenopsis buds from opening, but did not cause visible damage to opened flowers. Doses of 800 and 1000 Gy were damaging because they provoked the flowers to drop from the stem. Cattleya irradiated with 750 Gy did not show any damage, and were therefore eligible for the radiation treatment. Cymbidium tolerated up to 300 Gy and above this dose dropped prematurely. On the other hand, Oncydium did not tolerate doses above 150 Gy.(author)

  13. Internet log service for flower supply chains

    NARCIS (Netherlands)

    Thors, M.

    2004-01-01

    This summer has seen the completion of a project to develop quality tracking and tracing for cut flowers. Sponsored by the Dutch product board for horticulture, available technology was tested and integrated by researchers at the Agrotechnology and Food Innovations, WUR, into a system to

  14. Temperature affects Chrysanthemum flower characteristics differently during three phases of the cultivation period

    NARCIS (Netherlands)

    Carvalho, S.M.P.; Abi-Tarabay, H.; Heuvelink, E.

    2005-01-01

    The sensitivity to temperature of the number of flowers per plant including flower buds (NFPP), flower size, position and colour was investigated in cut chrysanthemum (Chrysanthemum morifolium cv. `Reagan Improved¿). Plants were grown either in a glasshouse at constant 24 h mean temperatures

  15. Cultivo hidropônico de lisianto para flor de corte em sistema de fluxo laminar de nutrientes Hydroponic growth of lisianthus as cut flower under nutrient film technique

    Directory of Open Access Journals (Sweden)

    Fernanda Alice Antonello Londero Backes

    2007-11-01

    Full Text Available O objetivo deste trabalho foi avaliar as características produtivas e comerciais do cultivo de quatro cultivares de lisianto (Eustoma grandiflorum em três soluções nutritivas em sistema de fluxo laminar de nutrientes (NFT. Utilizou-se o delineamento em blocos casualizados, em esquema fatorial 4x3, com três repetições. Os tratamentos foram compostos de quatro cultivares (Echo Champagne, Mariachi Pure White, Balboa Yellow e Ávila Blue Rim e três soluções nutritivas (Teste, Steiner modificada e Barbosa. O sistema NFT é uma alternativa viável para o cultivo de lisianto nas soluções Barbosa e Teste. A cultivar Echo Champagne foi superior quanto ao ciclo, período em produção, altura da haste floral, número de folhas, diâmetro de botão e produção de massa fresca e seca, enquanto a cultivar Mariachi Pure White se destacou quanto ao período em produção. A cultivar Ávila Blue Rim apresentou maior período de produção, número de flores e produção de massa de matéria fresca e seca, enquanto a cultivar Balboa Yellow apresentou maior período em produção e diâmetro de botão.The objective of this work was to evaluate yield and commercial traits of lisianthus (Eustoma grandiflorum flowers growth in nutrient film technique (NFT. The experimental design was in randomized blocks, in factorial scheme (4x3, with three replicates. The treatments were four cultivars (Echo Champagne, Mariachi Pure White, Balboa Yellow and Ávila Blue Rim and three nutrient solutions (Test, modified Steiner and Barbosa. The NFT system is a feasible alternative for the growth of lisianthus in Barbosa and Test solutions. The cultivar Echo Champagne was superior for cycle, length of production, height of flower stem, number of leaves, diameter of the bud flower and fresh and dry weight production, while the cultivar Mariachi Pure White was superior for length of production. The cultivar Ávila Blue Rim showed good length of production, number of flowers

  16. Design a Hummingbird Flower.

    Science.gov (United States)

    Bailey, Kim

    2002-01-01

    Presents an activity that engages students in designing and making an artificial flower adapted for pollination by hummingbirds. Students work in teams to design flowers that maximize the benefit from attracting hummingbirds. Examines characteristics of real flowers adapted to pollination by hummingbirds. (DLH)

  17. Investigating Micro-Tensile Bond Strength of Silorane Based Composite in Enamel Surfaces Prepared by Er:YAG Laser vs. Bur-Cut

    Directory of Open Access Journals (Sweden)

    AR Daneshkazemi

    2014-10-01

    Full Text Available Introduction: Recently, Er:YAG laser has been used for tooth preparations and silorane-based composites have been introduced to dentistry, though investigating this type of composites has received scant attention. Therefore, the aim of this study was to compare microtensile bond strength (MTBS of silorane- based composite (Filtek P90 3M/USA to enamel sufaces, prepared by Er:YAG laser irradiation versus bur cut. Methods:Same sized cavities were prepared by ER:YAG laser and bur on the enamel of 20 extracted teeth which were randomly divided into 4 groups:E1 laser + acid etching, E2: laser, E3: bur + acid etching, E4: bur. Then primer, adhesive and P60 resin composite were utilized according to the manufacturer instructions. After thermocycling, 20 samples were created in the form of an hour glass model with 1 mm2 slices in each group, and were tested by SD Mechatronic MTD 500 (Germany machine with cross head speed of 1mm/min to create the fracture. The failure mode was assessed under stereomicroscope (ZTX-3E, Zhejiang/China, and the study data were analysed by ANOVA test. Results: The study results revealed that highest and lowest microtensile bond strength belonged to E3 and E2 group respectively. No significant differences were observed between the tested groups(p= 0.213. Highest and lowest modes of failure were adhesive and cohesive respectively. ANOVA results did not demonstrate any significant differences between groups(p=0.845. Conclusion: Laser-prepared or bur-prepared cavities with or without etching and silorane based composite could not significantly affect MTBS in order to enamel.

  18. Preparation of 3D flower-like NiO hierarchical architectures and their electrochemical properties in lithium-ion batteries

    International Nuclear Information System (INIS)

    Li, Qing; Chen, Yuejiao; Yang, Ting; Lei, Danni; Zhang, Guanhua; Mei, Lin; Chen, Libao; Li, Qiuhong; Wang, Taihong

    2013-01-01

    3D flower-like NiO hierarchical architectures have been synthesized by a simple ethanolamine (EA)-mediated self-assembly route and subsequent calcination process. The synthesized β-Ni(OH) 2 precursors annealed at 300, 400 and 500 °C exhibit similar morphology by scanning electron microscopy and different crystallinity, surface area, and pore distribution via X-ray diffraction, Fourier transform infrared spectroscopy and nitrogen adsorption/desorption isotherms. The electrochemical properties indicate that the synthesized NiO hierarchical architectures annealed at 300 °C show the best electrochemical performance, which presents a reversible specific capacity of 713 mAh g −1 at a current density of 100 mA g −1 after 40 cycles. With varying the rate from 100 to 1000 mA g −1 , the capacity still remains 580 mAh g −1 at 500 mA g −1 after 18 cycles and resumes to 470 mAh g −1 at the same rate after 30 cycles. The above results indicate that the 3D flower-like NiO hierarchical architectures are promising anode materials for lithium ion batteries

  19. The fate of murine norovirus and hepatitis A virus during preparation of fresh produce by cutting and grating.

    Science.gov (United States)

    Wang, Qing; Erickson, Marilyn; Ortega, Ynes R; Cannon, Jennifer L

    2013-03-01

    Human noroviruses and hepatitis A virus (HAV) are commonly associated with outbreaks occurring in restaurant establishments and catered events. Food handlers are major contributing factors to foodborne illnesses initiated in the kitchen setting. In this study, transfer of HAV and murine norovirus (MNV-1), a human norovirus surrogate, between produce (cucumbers, strawberries, tomatoes, cantaloupes, carrots, and honeydew melons) and common kitchen utensils (graters and knives) was investigated. The extent of virus transfer to produce during utensil application, in the presence and the absence of food residue, and the impact of knife surface properties (sharp, dull, serrated) was also investigated. Transfer of MNV-1 and HAV from produce items, initially contaminated with ~5.5 log PFU, to knives and graters during application ranged from 0.9 to 5.1 log PFU. MNV-1 transfer to knives was the greatest for cucumbers, strawberries, and tomatoes, and the least for honeydew melons, while transfer of HAV to knives was greater for tomatoes and honeydew melons than strawberries, cantaloupes, and cucumbers. After preparation of a contaminated produce item, knife cross-contamination easily occurred as viruses were detected on almost all of the seven produce items successively prepared. Produce residues on utensils often resulted in less virus transfer when compared to utensils without residue accumulation. Knife surface properties did not impact virus transfer. The ease of virus transfer between produce and utensils demonstrated by the current study highlights the importance of efforts aimed toward preventing cross-contamination in the kitchen environment.

  20. Preparative Separation of Phenolic Compounds from Chimonanthus praecox Flowers by High-Speed Counter-Current Chromatography Using a Stepwise Elution Mode

    Directory of Open Access Journals (Sweden)

    Huaizhi Li

    2016-08-01

    Full Text Available High-speed counter-current chromatography (HSCCC has been successfully used for the separation of eight compounds from Chimonanthus praecox flowers. Firstly, the crude extract of Chimonanthus praecox flowers was dissolved in a two-phase solvent system composed of petroleum ether–ethyl acetate–methanol–H2O (5:5:3:7, v/v and divided into two parts: the upper phase (part I and the lower phase (part II. Then, HSCCC was applied to separate the phenolic acids from part I and part II, respectively. Considering the broad polarity range of target compounds in part I, a stepwise elution mode was established. Two optimal solvent systems of petroleum ether–ethyl acetate–methanol–H2O–formic acid (FA (5:5:3:7:0.02, 5:5:4.3:5.7:0.02, v/v were employed in this separation. Five phenylpropanoids and two flavonoids were successfully separated from 280 mg of part I, including 8.7 mg of 3,4-dihydroxy benzoic acid (a, 95.3% purity, 10.9 mg of protocatechualdehyde (b, 96.8% purity, 11.3 mg of p-coumaric acid (c, 98.9% purity, 12.2 mg of p-hydroxybenzaldehyde (d, 95.9% purity, 24.7 mg of quercetin (e, 97.3% purity, 33.8 mg of kaempferol (f, 96.8% purity, and 24.6 mg of 4-hydroxylcinnamic aldehyde (g, 98.0% purity. From 300 mg of part II, 65.7 mg of rutin (h, 98.2% purity, 7.5 mg of 3,4-dihydroxy benzoic acid (a, 77.4% purity, and 4.7 mg of protocatechualdehyde (b, 81.6% purity were obtained using the solvent system EtOAc–n-butanol (n-BuOH–FA–H2O (4:1:0.5:5, v/v. The structures of the eight pure compounds were confirmed by electrospray ionization-mass spectrometry (ESI-MS, 1H-NMR and 13C-NMR. To the best of our knowledge, compounds a–d and f were the first separated and reported from the Chimonanthus praecox flower extract.

  1. Heredity of flake- and stripe-variegated traits and their introduction into Japanese day-neutral winter-flowering sweet pea (Lathyrus odoratus L.) cultivars.

    Science.gov (United States)

    Yagishita, Yoshimi; Hara, Yasuhide; Nakayama, Masayoshi

    2018-01-01

    Sweet pea ( Lathyrus odoratus L.) is a major cut flower in Japan, generally grown in greenhouses in winter to spring. The wild-type sweet pea is a long-day summer-flowering plant. The day-neutral winter-flowering ability, which allows cut-flower production in Japan, is a recessive phenotype that emerged by spontaneous mutation. Although Japanese winter-flowering cultivars and additionally spring-flowering cultivars, which have semi-long-day flowering ability generated by crossing the winter- and summer-flowering cultivars, have superior phenotypes for cut flowers, they have limited variation in color and fragrance. In particular, variegated phenotypes do not appear in modern winter- and spring-flowering cultivars, only in summer-flowering cultivars. We try to expand the phenotypic diversity of Japanese cut flower cultivars. In the processes, we introduced the variegated phenotypes by crossing with summer-flowering cultivars, and succeeded in breeding some excellent cultivars. During breeding, we analyzed the segregation ratios and revealed the heredity of the phenotypes. Here we review the heredity of these variegated phenotypes and winter-flowering phenotypes and their related genes. We also describe how we introduced the trait into winter-flowering cultivars, tracing their pedigrees to show both phenotypes and genotypes of the progeny at each generation. This knowledge is useful for the efficient breeding of new variegated cultivars.

  2. Effects of types of media and NPK fertilizer on the rooting capacity of chrysanthemum cuttings

    NARCIS (Netherlands)

    Budiarto, K.; Sulyo, Y.; Dwi, E.; Maaswinkel, R.H.M.

    2006-01-01

    Physiological status of chrysanthemum cuttings during rooting process highly influences plant growth and flower production. Amongst other aspects, rooting capacity of the cuttings is the most important. Rooting capacity is influenced by environmental conditions such as growing medium and nutrition.

  3. An Apology for Flowers

    OpenAIRE

    Mehdi Aghamohammadi

    2017-01-01

    Prompting critical reflection on the common claim that flowers are always symbolic of female sexuality, the present article intends to explore symbolic roles of flowers in Persian literature and provide examples, mainly from Persian poetry, with the aim of refuting the claim. The writer, in fact, attempts to highlight overshadowed facets of flower symbolism by overshadowing carnal and ignoble readings of it. The reason why Persian literature has come into the focus of this study is that flowe...

  4. Quality management of cut carnation 'Tempo' with 1- MCP

    African Journals Online (AJOL)

    STORAGESEVER

    2009-10-19

    Oct 19, 2009 ... carnation 'Tempo' which is an ethylene-sensitive flower, were evaluated. The effects of 1-MCP .... rolling of the petals. Water uptake rate (ml g-1 .... The studies of Chamani (2006) on Rosa 'First red' cut flowers revealed that ...

  5. Cutting cleaner

    International Nuclear Information System (INIS)

    Elsen, R.P.H. van; Smits, M.

    1991-01-01

    This paper presents the results of a long term field test of the Cutting Cleaner, which is used for the treatment of wet oil contaminated cuttings (WOCC) produced when drilling with Oil Based Mud (OBM). It was concluded that it is possible to reduce the oil content of cuttings to an average of 1 - 2%. The recovered base oil can be reused to make new oil based mud

  6. Growth modes and epitaxy of FeAl thin films on a-cut sapphire prepared by pulsed laser and ion beam assisted deposition

    Energy Technology Data Exchange (ETDEWEB)

    Yao, Xiang; Trautvetter, Moritz; Ziemann, Paul [Institut für Festkörperphysik, Universität Ulm, Albert-Einstein-Allee 11, 89069 Ulm (Germany); Wiedwald, Ulf [Institut für Festkörperphysik, Universität Ulm, Albert-Einstein-Allee 11, 89069 Ulm (Germany); Fakultät für Physik, Universität Duisburg-Essen, Lotharstraße 1, 47057 Duisburg (Germany)

    2014-01-14

    FeAl films around equiatomic composition are grown on a-cut (112{sup ¯}0) sapphire substrates by ion beam assisted deposition (IBAD) and pulsed laser deposition (PLD) at ambient temperature. Subsequent successive annealing is used to establish chemical order and crystallographic orientation of the films with respect to the substrate. We find a strongly [110]-textured growth for both deposition techniques. Pole figures prove the successful preparation of high quality epitaxial films by PLD with a single in-plane orientation. IBAD-grown films, however, exhibit three in-plane orientations, all of them with broad angular distributions. The difference of the two growth modes is attributed to the existence of a metastable intermediate crystalline orientation as concluded from nonassisted sputter depositions at different substrate temperatures. The formation of the chemically ordered crystalline B2 phase is accompanied by the expected transition from ferromagnetic to paramagnetic behavior of the films. In accordance with the different thermally induced structural recovery, we find a step-like magnetic transition to paramagnetic behavior after annealing for 1 h at T{sub A} = 300 °C for IBAD deposition, while PLD-grown films show a gradual decrease of ferromagnetic signals with rising annealing temperatures.

  7. Paper Cuts.

    Science.gov (United States)

    Greene, Lisa A.

    1990-01-01

    Describes how to create paper cuts and suggests the most appropriate materials for young children that give good quality results. Describes the methods the author, a professional artist, uses to assemble her own paper cuts and how these can be adopted by older students. (KM)

  8. The Cutting Process, Chips and Cutting Forces in Machining CFRP

    DEFF Research Database (Denmark)

    Koplev, A.; Lystrup, Aage; Vorm, T.

    1983-01-01

    The cutting of unidirectional CFRP, perpendicular as well as parallel to the fibre orientation, is examined. Shaping experiments, ‘quick-stop’ experiments, and a new chip preparation technique are used for the investigation. The formation of the chips, and the quality of the machined surface...... is discussed. The cutting forces parallel and perpendicular to the cutting direction are measured for various parameters, and the results correlated to the formation of chips and the wear of the tool....

  9. Translating BPEL to FLOWer

    DEFF Research Database (Denmark)

    Lassen, Kristian Bisgaard

    FLOWer is a case handling tool made by Pallas-Athena for process management in the service industry. BPEL on the other hand is a language for web service orchestration, and has become a de facto standard, because of its popularity, for specifying workflow processes even though that was not its...... original purpose. This paper describe an approach translating BPLE to FLOWer, or more precisely form BPEL to CHIP. where CHIP is the interchange language that FLOWer import from and export to. The aim of the translation scheme that I give is to derive a CHIP specification that is behaviorally equivalent...

  10. Wet cutting

    Energy Technology Data Exchange (ETDEWEB)

    Hole, B. [IMC Technical Services (United Kingdom)

    1999-08-01

    Continuous miners create dust and methane problems in underground coal mining. Control has usually been achieved using ventilation techniques as experiments with water based suppression have led to flooding and electrical problems. Recent experience in the US has led to renewed interest in wet head systems. This paper describes tests of the Hydraphase system by IMC Technologies. Ventilation around the cutting zone, quenching of hot ignition sources, dust suppression, the surface trial gallery tests, the performance of the cutting bed, and flow of air and methane around the cutting head are reviewed. 1 ref., 2 figs., 2 photos.

  11. Cutting assembly

    Science.gov (United States)

    Racki, Daniel J.; Swenson, Clark E.; Bencloski, William A.; Wineman, Arthur L.

    1984-01-01

    A cutting apparatus includes a support table mounted for movement toward and away from a workpiece and carrying a mirror which directs a cutting laser beam onto the workpiece. A carrier is rotatably and pivotally mounted on the support table between the mirror and workpiece and supports a conduit discharging gas toward the point of impingement of the laser beam on the workpiece. Means are provided for rotating the carrier relative to the support table to place the gas discharging conduit in the proper positions for cuts made in different directions on the workpiece.

  12. Fertilization in Flowering Plants

    Indian Academy of Sciences (India)

    IAS Admin

    Ecology and the Environ- ment, Bengaluru as ... remaining plants, it is an abiotic agent (abiotic pollination), .... tion was slow until the origin of flowering plants and evolution of ..... Although pollination is generally a mutual interaction in a major-.

  13. Fertilization in Flowering Plants

    Indian Academy of Sciences (India)

    Ecology and the. Environment ... agents (pollinators), the next step before fertilization is to se- .... the embryo sac are referred to as pollen-pistil interaction and play ..... evolutionary success of flowering plants when compared to other groups of ...

  14. Petal abscission in rose flowers: effects of water potential, light intensity and light quality

    NARCIS (Netherlands)

    Doorn, van W.G.; Vojinovic, A.

    1996-01-01

    Petal abscission was studied in roses (Rosa hybrida L.), cvs. Korflapei (trade name Frisco), Sweet Promise (Sonia) and Cara Mia (trade name as officially registered cultivar name). Unlike flowers on plants in greenhouses, cut flowers placed in water in the greenhouse produced visible symptoms of

  15. Stars and Flowers, Flowers and Stars

    Science.gov (United States)

    Minti, Hari

    2012-12-01

    The author, a graduated from the Bucharest University (1964), actually living and working in Israel, concerns his book to variable stars and flowers, two domains of his interest. The analogies includes double stars, eclipsing double stars, eclipses, Big Bang. The book contains 34 chapters, each of which concerns various relations between astronomy and other sciences and pseudosciences such as Psychology, Religion, Geology, Computers and Astrology (to which the author is not an adherent). A special part of the book is dedicated to archeoastronomy and ethnoastronomy, as well as to history of astronomy. Between the main points of interest of these parts: ancient sanctuaries in Sarmizegetusa (Dacia), Stone Henge(UK) and other. The last chapter of the book is dedicated to flowers. The book is richly illustrated. It is designed for a wide circle of readers.

  16. The Gesso Cut for Printmaking

    Science.gov (United States)

    Kelly, Perry; Sarvis, Alva

    1969-01-01

    Directions are given for the preparation, cutting, and printing of a gesso board. A gesso cut is defined as a board coated with gesso into which a design has been impressed. The process is similar to the woodcut, but offers greater textural possibilities. (BF)

  17. IN VITRO FLOWERING OF INDONESIAN Phalaenopsis amabilis (L. Blume

    Directory of Open Access Journals (Sweden)

    Ixora Sartika Mercuriani

    2014-02-01

    Full Text Available Flowering is very important in orchid cultivation. However, the long vegetative phase to be able to bloom of the plant becomes an important problem. The orchid needs three up to five years after sowing to bloom. In this study, flowering induction is done in the early growth stages of plants. At six months after sowing (mas, plants were sub-cultured on New Phalaenopsis (NP medium witha half Nitrogen(N concentration of NP (1/2NP, with or without Benzyl Adenine (BA, concentration variations of Phosphor/P (1,5 mM and 3 mM, and with or without roots cutting. In vitro flowering of Indonesian Phalaenopsisamabilis (P. amabilis can induced on medium that contain 22.2 µM BA and 3 mM P with roots cutting at 18 mas.

  18. Fast neutron induced increase of flowering in portulaca grandiflora linn

    International Nuclear Information System (INIS)

    Abraham, V.; Desai, B.M.

    1975-01-01

    Unbranched cuttings were exposed to fast neutron doses of 71-284 rads and planted along with unirradiated controls. There was a significant increase in the numbers of flowers in the treated populations due to the increased production of primary and secondary branches. (MG) [de

  19. Symmetric metamaterials based on flower-shaped structure

    International Nuclear Information System (INIS)

    Tuong, P.V.; Park, J.W.; Rhee, J.Y.; Kim, K.W.; Cheong, H.; Jang, W.H.; Lee, Y.P.

    2013-01-01

    We proposed new models of metamaterials (MMs) based on a flower-shaped structure (FSS), whose “meta-atoms” consist of two flower-shaped metallic parts separated by a dielectric layer. Like the non-symmetric MMs based on cut-wire-pairs or electric ring resonators, the symmetrical FSS demonstrates the negative permeability at GHz frequencies. Employing the results, we designed a symmetric negative-refractive-index MM [a symmetric combined structure (SCS)], which is composed of FSSs and cross continuous wires. The MM properties of the FSS and the SCS are presented numerically and experimentally. - Highlights: • A new designed of sub-wavelength metamaterial, flower-shaped structure was proposed. • Flower-shaped meta-atom illustrated effective negative permeability. • Based on the meta-atom, negative refractive index was conventionally gained. • Negative refractive index was demonstrated with symmetric properties for electromagnetic wave. • Dimensional parameters were studied under normal electromagnetic wave

  20. Cutting Cosmos

    DEFF Research Database (Denmark)

    Mikkelsen, Henrik Hvenegaard

    For the first time in over 30 years, a new ethnographic study emerges on the Bugkalot tribe, more widely known as the Ilongot of the northern Philippines. Exploring the notion of masculinity among the Bugkalot, Cutting Cosmos is not only an experimental, anthropological study of the paradoxes...... around which Bugkalot society revolves, but also a reflection on anthropological theory and writing. Focusing on the transgressive acts through which masculinity is performed, this book explores the idea of the cosmic cut, the ritual act that enables the Bugkalot man to momentarily hold still the chaotic...

  1. Diagnosis of the retail flower market of Santa Maria, RS

    Directory of Open Access Journals (Sweden)

    Janine Farias Menegaes

    2015-12-01

    Full Text Available The present study aimed to diagnose the flowers retail market and ornamental plants in Santa Maria, RS, Brazil, by means of a research in loco, from January to June of 2013, based on questionnaires and interviews applied to the managers of the establishment, as well as of an application of a visual and phytosanitary scale to other establishments that sell flowers and ornamental plants, such as agricultural shops, fairs of horticultural products, supermarkets and providers of funeral services - cemeteries and funeral homes. The diagnosis aims to know the steps of the dynamics observed from the market of flowers until the final consumer, and to segment the types of floricultures, distinguishing them according to the commercial focus — floricultures of arrangements and bouquets, and producing flowers and landscape floricultures. Based on the diagnosis it can be concluded that the Santa Maria retail flowers and ornamental plants follows the national trend of floral arrangements and bouquets shops, with the increase of the companies focused on landscaping and gardening. Among the most marketed plants are the rose as the best-selling cut flower, the begonia as potted flower, the fern for foliage arrangements, the cactus as potted plant, the raffia as garden plant and the pansy as the best-selling plant in boxes.

  2. Seed Germination and Cuttings Growth of Piper Aduncum

    Science.gov (United States)

    Susanto, D.; Sudrajat; Suwinarti, W.; Amirta, R.

    2018-04-01

    Sirih hutan (Piper aduncum L) is one of group shurbs tropical species, has potential to be developed as raw material of biomass based electricity. The aim of this research was to know seed germination and cuttings growth of P. aduncum plant as the first step in cultivation of this plant. Observation of flowers and fruits were done in secondary forest, while seed germination and growth of shoot cuttings were done in the laboratory. The results showed that P. aduncum seeds can be germinated in a relatively short time of 17 to 25 days with a fairly high germination percentage of 90 ± 8.16% and germination rate of 4.7 ± 0.34%. The growth of seedlings at 2 months old was 4.78 ± 0.42 cm, plant height 3.97 ± 0.27 cm, and relative growth rate 0.33 ± 0.14%. The treatment of synthetic growth regulator had significant effect on shoot growth and root number on the plant stem cuttings. Preparation of seedlings ready to plant in a generative and vegetative for cultivation of these plants in the experimental plot.

  3. Flowering in Xanthium strumarium

    Science.gov (United States)

    Leonard, Maggy; Kinet, Jean-Marie; Bodson, Monique; Havelange, Andrée; Jacqmard, Annie; Bernier, Georges

    1981-01-01

    Vegetative plants of Xanthium strumarium L. grown in long days were induced to flower by exposure to one or several 16-hour dark periods. The distribution of male and female inflorescences on the flowering shoot was described, and a scoring system was designed to assess the development of the female inflorescences. The time of movement of the floral stimulus out of the induced leaf and the timing of action of high temperature were shown to be similar for both the apical male and lateral female inflorescences. Strong photoperiodic induction of the plants favored female sex expression, while maleness was enhanced by exogenous gibberellic acid. The problem of the control of sex expression in Xanthium is discussed in relation to the distribution pattern of male and female inflorescences on the flowering shoot and to the state of the meristem at the time of the arrival of the floral stimulus. Images PMID:16661844

  4. Effect of Packaging on Shelf-life and Lutein Content of Marigold (Tagetes erecta L.) Flowers.

    Science.gov (United States)

    Pal, Sayani; Ghosh, Probir Kumar; Bhattacharjee, Paramita

    2016-01-01

    African marigold (Tagetes erecta L.) flowers are highly valued for their ornamental appeal as well as medicinal properties. However, their short shelf lives cause high post-harvest loss and limit their export potential. The review of patents and research articles revealed that different types of packaging designs/materials have been successfully employed for extension of shelf lives of cut flowers. The current work focuses on designing of different packaging configurations and selection of best configuration for preservation of marigold cut flowers. Ten packaging configurations, composed of four different packaging materials i.e., low density polyethylene (LDPE), polyethylene terephthalate, glassine paper and cellophane paper, were designed. Each pack, consisting of 20 ± 1 g of marigold flowers along with non-packaged control set were stored at 23 ± 2°C, 80% R.H., in an environmental chamber and the flowers were evaluated for their sensory attributes, phytochemical characteristics and physicochemical parameters of senescence to determine their shelf lives. Flowers packed in LDPE bag showed highest shelf life of 8 days with a lead of 4 days compared to control (shelf life - 4 days). This study also established for the first time the phenomenon of carotenogenesis in marigold cut flowers with significantly (Pshelf lives. This economically viable packaging can not only boost the export potential of this ornamental flower, but also allow utilization of nutraceutical potency of lutein.

  5. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mengjiao Yu; Ramadan Ahmed; Mark Pickell; Len Volk; Lei Zhou; Zhu Chen; Aimee Washington; Crystal Redden

    2003-09-30

    The Quarter began with installing the new drill pipe, hooking up the new hydraulic power unit, completing the pipe rotation system (Task 4 has been completed), and making the SWACO choke operational. Detailed design and procurement work is proceeding on a system to elevate the drill-string section. The prototype Foam Generator Cell has been completed by Temco and delivered. Work is currently underway to calibrate the system. Literature review and preliminary model development for cuttings transportation with polymer foam under EPET conditions are in progress. Preparations for preliminary cuttings transport experiments with polymer foam have been completed. Two nuclear densitometers were re-calibrated. Drill pipe rotation system was tested up to 250 RPM. Water flow tests were conducted while rotating the drill pipe up to 100 RPM. The accuracy of weight measurements for cuttings in the annulus was evaluated. Additional modifications of the cuttings collection system are being considered in order to obtain the desired accurate measurement of cuttings weight in the annular test section. Cutting transport experiments with aerated fluids are being conducted at EPET, and analyses of the collected data are in progress. The printed circuit board is functioning with acceptable noise level to measure cuttings concentration at static condition using ultrasonic method. We were able to conduct several tests using a standard low pass filter to eliminate high frequency noise. We tested to verify that we can distinguish between different depths of sand in a static bed of sand. We tested with water, air and a mix of the two mediums. Major modifications to the DTF have almost been completed. A stop-flow cell is being designed for the DTF, the ACTF and Foam Generator/Viscometer which will allow us to capture bubble images without the need for ultra fast shutter speeds or microsecond flash system.

  6. THE EFFECT OF ETHREL ON THE DURATION OF FLOWERING OF MALE FLOWERS SQUASH PLANTS WITH DIFFERENT GENETIC EXPRESSIVENESS OF FLOWER GENDER IN THE KRASNODAR REGION CONDITION

    Directory of Open Access Journals (Sweden)

    R. A. Gish

    2016-01-01

    Full Text Available Depending on the genotype of monoecious plants Cucurbitaceae family may have different gender expressions: predominantly female, mixed and predominantlymale type of flowering. However, the degree of sexual differentiation can be changedunder the influence of abiotic and endogenous factors. Among the chemicals that affect the level of female flowering in pumpkin crops, preparations based on 2-chloroethylphosphonic acid (Ethephon or Etrelle are the most promising for hybrid seed production. Study of plant response of squash Cucurbita pepo var. giromontina with varying sex expressions on the treatments with Etrelle revealed common conformities and specificities of preparation action in the condition of Krasnodar region. It is shown the use of treatment once is not effective even if the high concentration range, 500-1100 mg/L, was taken. On gender switch was effectively influenced successive plant treatments with Etrelle at stages of 3-5 true leaves in a wide concentration range from 250 to 700 mg /L., where the restraining was that the start of male flower blossoming was 14-25 days after female flower blossoming. K69 line with predominantly female flowering was more responsive to the variation of concentration and frequency of treatments whereas the line K49 with male flowering was less responsive to the frequency of treatments. It is shown that in the range of effective concentrations, Etrelle may have phytotoxic effects on the growth and development of squash plants at the time of restraining flowering of male flowers. It is important to  ake that into account when choosing a regime of preparation treatments for chemical castration of maternal forms in hybrid seed production of this crop.

  7. Effect of silver thiosulphate preservative on the physiology of cut carnations

    International Nuclear Information System (INIS)

    Ducasse, P.B.; Van Staden, J.

    1981-01-01

    This investigation attempted to determine the effect of silver thiosulphate on the carbohydrate status of cut carnation flowers. Labelled [ 14 C] sucrose was applied by microsyringe to two of the outer petals of each flower. At fixed intervals flowers were withdrawn from the different solutions and separated into labelled petals, untreated petals, gynoecia, and shoots. Paper chromatographic techniques were used to determine whether any detected radioactivity was associated with sucrose or its breakdown products. The vase life of flowers was extended by silver thiosulphate treatment and decreased by Ethrel application. Ethrel application enhanced carbohydrate utilization and also accelerated transport of labelled compounds from the treated petals to the rest of the flower

  8. Fertilization in Flowering Plants

    Indian Academy of Sciences (India)

    ... for the right pollen,the pistil imposes a tough competition amongst them, comparableto a swayamvara of Indian mythology, to select the bestavailable pollen. Flowering plants have evolved into a matriarchalsociety. The selection of the male partner is totally theprerogative of the mother (pistil); the boy (pollen grain) andthe ...

  9. Cutting Itch

    OpenAIRE

    Zellweger, Christoph

    2015-01-01

    Cutting Itch” is a curatorial project by artists-duo Baltensperger-Siepert. An exhibition project about the essential need of art to be an active system that reflects, investigates social, cultural and political issues. It is about an existential necessity to shape ones environment, to think about relations, regulating structures and about how we can locate ourselves in a more and more globalised world. (from press material). \\ud \\ud Baltensperger & Siepert identified seven artists from Mexi...

  10. Design, construction and evaluation of a row singulator for saffron flowers

    Directory of Open Access Journals (Sweden)

    hamed bakhshi

    2017-12-01

    Full Text Available Separation of stigma from petals is one of the required tasks in saffron production. The mechanical separation of saffron flowers may be performed through the following steps: I singulation of the flowers ii aligning the flowers iii cutting the style (Konje and iv separating the stigma from the petals. Because of the importance of saffron flower separation, a prototype device was constructed in this project for singulating and aligning of saffron flowers, prior to the cutting operation. This device can also be installed to work with other cutting and separating equipment and produce on an industrial scale. A pickup vacuum cylinder was used for singulating the flowers and an inclined V-shaped surface was employed for aligning of saffron flowers. The constructed apparatus was evaluated from the standpoint of singling efficiency and losses. For this purpose, three types of saffron flowers (buds, open short tail and long tail, three rotational speeds of pickup cylinder (6, 12 and 21.5 rpm, three levels of suction (30, 70 and 100 mm Hg, and four different inner diameters of finger’s nozzle (2, 3, 4 and 5 mm were used with three replications. The results of analysis on the constructed device showed that the highest efficiency (75% is observed for short tailopen saffron flowers with 5 mm inner diameter of sucking nozzles, suction of 100 mm Hg and the rotational speed of 6 rpm. To evaluate the performance of flower aligning, 100 saffron flowers with an average length of 5 cm were selected and tested with 5 replications. The average aligning with the correct direction obtained was equal to 84%.

  11. Some aspects of mineral nutrition and flowering

    NARCIS (Netherlands)

    Hinnawy, El E.I.

    1956-01-01

    In mustard N deficiency accelerated flower initiation and particularly flower bud development. Excess N delayed flowering but increased number of flowers. Of other elements Ca influenced flowering most.

    Dill developed its flowers most rapidly with normal or high rates of N. N deficiency retarded

  12. Chemical control of flowering time

    DEFF Research Database (Denmark)

    Ionescu, Irina Alexandra; Møller, Birger Lindberg; Sánchez Pérez, Raquel

    2017-01-01

    Flowering at the right time is of great importance; it secures seed production and therefore species survival and crop yield. In addition to the genetic network controlling flowering time, there are a number of much less studied metabolites and exogenously applied chemicals that may influence...... on the genetic aspects of flowering time regulation in annuals, but less so in perennials. An alternative to plant breeding approaches is to engineer flowering time chemically via the external application of flower-inducing compounds. This review discusses a variety of exogenously applied compounds used in fruit...

  13. Female genital cutting.

    Science.gov (United States)

    Perron, Liette; Senikas, Vyta; Burnett, Margaret; Davis, Victoria

    2013-11-01

    To strengthen the national framework for care of adolescents and women affected by female genital cutting (FGC) in Canada by providing health care professionals with: (1) information intended to strengthen their knowledge and understanding of the practice; (2) directions with regard to the legal issues related to the practice; (3) clinical guidelines for the management of obstetric and gynaecological care, including FGC related complications; and (4) guidance on the provision of culturally competent care to adolescents and women with FGC. Published literature was retrieved through searches of PubMed, CINAHL, and The Cochrane Library in September 2010 using appropriate controlled vocabulary (e.g., Circumcision, Female) and keywords (e.g., female genital mutilation, clitoridectomy, infibulation). We also searched Social Science Abstracts, Sociological Abstracts, Gender Studies Database, and ProQuest Dissertations and Theses in 2010 and 2011. There were no date or language restrictions. Searches were updated on a regular basis and incorporated in the guideline to December 2011. Grey (unpublished) literature was identified through searching the websites of health technology assessment and health technology-related agencies, clinical practice guideline collections, clinical trial registries, and national and international medical specialty societies. The quality of evidence in this document was rated using the criteria described in the Report of the Canadian Task Force on Preventive Health Care (Table 1). Summary Statements 1. Female genital cutting is internationally recognized as a harmful practice and a violation of girls' and women's rights to life, physical integrity, and health. (II-3) 2. The immediate and long-term health risks and complications of female genital cutting can be serious and life threatening. (II-3) 3. Female genital cutting continues to be practised in many countries, particularly in sub-Saharan Africa, Egypt, and Sudan. (II-3) 4. Global migration

  14. Patterns of MADS-box gene expression mark flower-type development in Gerbera hybrida (Asteraceae

    Directory of Open Access Journals (Sweden)

    Teeri Teemu H

    2006-06-01

    Full Text Available Abstract Background The inflorescence of the cut-flower crop Gerbera hybrida (Asteraceae consists of two principal flower types, ray and disc, which form a tightly packed head, or capitulum. Despite great interest in plant morphological evolution and the tractability of the gerbera system, very little is known regarding genetic mechanisms involved in flower type specification. Here, we provide comparative staging of ray and disc flower development and microarray screening for differentially expressed genes, accomplished via microdissection of hundreds of coordinately developing flower primordia. Results Using a 9K gerbera cDNA microarray we identified a number of genes with putative specificity to individual flower types. Intrestingly, several of these encode homologs of MADS-box transcription factors otherwise known to regulate flower organ development. From these and previously obtained data, we hypothesize the functions and protein-protein interactions of several gerbera MADS-box factors. Conclusion Our RNA expression results suggest that flower-type specific MADS protein complexes may play a central role in differential development of ray and disc flowers across the gerbera capitulum, and that some commonality is shared with known protein functions in floral organ determination. These findings support the intriguing conjecture that the gerbera flowering head is more than a mere floral analog at the level of gene regulation.

  15. Let the flowers grow…

    CERN Multimedia

    CERN Bulletin

    2011-01-01

    The Environmental part of CERN Safety policy is represented by a flower whose petals are the various domains of its application. The Environment Services section within the Occupational Health and Safety and Environmental Protection Unit is in charge of monitoring the impact of the Laboratory on the environment. You are called on to make every effort to reduce this impact as much as reasonably achievable. Read why and how…   A physics Laboratory occupying a territory of the size of a small village, with sites scattered across an even larger area, has a considerable potential impact on the environment. Energy and water consumption, waste management... these are all aspects of the same problem or, in the representation, petals of the same flower. Each one should be carefully studied and dealt with. The nine members of the Environment Services section deal with matters that concern these and other aspects of the CERN's policy for the protection of the environment. “...

  16. Two-dimensional multi-heart cutting centrifugal partition chromatography-liquid chromatography for the preparative isolation of antioxidants from Edelweiss plant.

    Science.gov (United States)

    Marlot, Léa; Batteau, Magali; Escofet, Marie-Claire; Nuccio, Sylvie; Coquoin, Véronique; De Vaumas, René; Faure, Karine

    2017-06-30

    The Edelweiss plant has been recognized as a very valuable source of anti-aging principles due to its composition of antioxidants compounds: leontopodic acid A and 3,5-dicaffeoylquinic acid. In this work, off-line multi-heart cutting CPC-LC separation was set up at industrial scale in order to isolate and produce new high quality reference material of these two antioxidants from Edelweiss. For this purpose, CPC and HPLC methods were developed and optimized at laboratory scale and a comprehensive CPCxHPLC analysis of the crude extract was established. Thereby, the CPC method led to a first separation of the target compounds according to their partition coefficient in the solvent system and the HPLC method was performed on the recovered fractions to lead to a second separation. A 2D CPCxHPLC plot was established in order to know the fractions to select at the industrial scale. Then, the CPC and HPLC methods were transferred at industrial scale and the multi-heart cutting CPC-LC was performed in off-line mode. Using CPC with methyl ter-butyl ether-water 1:1 (v/v) solvent system and LC with Denali C18 column, 2g of crude extract sample were injected and leontopodic acid A and 3,5-dicaffeoylquinic acid were recovered with purity over 97%. The compounds were identified by MS and NMR. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Eating flowers? Exploring attitudes and consumers' representation of edible flowers.

    Science.gov (United States)

    Rodrigues, H; Cielo, D P; Goméz-Corona, C; Silveira, A A S; Marchesan, T A; Galmarini, M V; Richards, N S P S

    2017-10-01

    Edible flowers have gained more attention in recent years thanks to their perceived health benefits. Despite this attention, it seems that edible flowers are not popularized for consumption in South America, being considered unfamiliar for some cultures from this continent. In this context, the general goal of the present study was to investigate the three dimensions of social representation theory, the representational field, the information and the attitude of the two conditions of edible flowers: a more general "food made with flowers" and more directional product "yoghurt made with flowers", using Brazilian consumers. To achieve this goal, a free word association task was applied. A total of 549 consumers participated in this study. Participants were divided into two conditions, in which the inductor expressions for the free word association task changed: (a) food products made with flowers and (b) yoghurt made with flowers. Results showed a very positive attitude to both situations, and consumers associated Food products made with flowers to "health care" while the central core of yoghurt made with flowers reflected the innovative condition of this product, supported here by their unpredictable character (information generated). Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Influence of simulated acid rain on the flowering dogwood (Cornus florida) leaf surface

    Energy Technology Data Exchange (ETDEWEB)

    Brown, D.A. (Auburn Univ., AL (United States)); Windham, M.T.; Trigiano, R.N. (Tennessee Univ., Knoxville, TN (United States)); Anderson, R.L. (United States Dept. of Agriculture, Asheville, NC (United States))

    1994-01-01

    Acidic rainfall has the potential to influence anthracnose incidence and severity in flowering dogwood (Cornus florida L.) of the eastern United States. One-year-old, nursery-grown flowering dogwood seedlings were exposed to 1 cm of simulated rain 10 times over a 42-day period in 1990. Simulated rains were composed of a mixture of salts typical of ambient rainfall in the eastern United States and pH was adjusted to 5.5, 4.5, 3.5, and 2.5 with sulfuric and nitric acids. Samples were cut from the leaf tip, margin, and midvein of rain-treated trees and prepared for scanning electron microscopy. Cuticular cracking, desiccation, and erosion of trichrome surfaces were observed with decreasing pH for all samples. Cuticular erosion due to acid rain has the potential to predispose dogwoods in the eastern United States to anthracnose caused by Discula destructiva sp.nov. (Red.) and an unnamed Discula sp. 25 refs., 4 figs.

  19. Epigenetic regulation of photoperiodic flowering

    OpenAIRE

    Takeno, Kiyotoshi

    2010-01-01

    The cytidine analogue 5-azacytidine, which causes DNA demethylation, induced flowering in the non-vernalization-requiring plants Perilla frutescens var. crispa, Silene armeria and Pharbitis nil (synonym Ipomoea nil) under non-inductive photoperiodic conditions, suggesting that the expression of photoperiodic flowering-related genes is regulated epigenetically by DNA methylation. The flowering state induced by DNA demethylation was not heritable. Changes in the genome-wide methylation state we...

  20. Efecto de inhibidores de etileno en la longevidad floral del clavel (Dianthus caryophyllus L. como probables sustitutos del tiosulfato de plata (STS Effect of ethylene inhibitors in extending the vase life of camation iDianthus caryophyllus L. cut flowers as substitutes of silver thiosulfate (STS

    Directory of Open Access Journals (Sweden)

    Cubillos Eliberto

    2001-12-01

    Chrysal EVB presentaron resultados similares a los compuestos que contenían dicho ion y, por lo tanto, pueden ser eficientes en el reemplazo del STS, que es potencialmente un contaminante ambiental.
    In Colombia the sector of cut flower exportation has great
    economic importance. However, high production costs and low
    prices have reduced the profitability off flowers in the last years. With the objective of compared the response of traditional products in postharvest, whose main ingredient is the Ag+ ion, with other products of more degradability, a research was carried out with standard carnation variety 'Nelson'. The floral stalks were harvested in a crop under greenhouse conditions in a commercial production farm ofthe Bogotá plateau. Flowers were graded and treated with different postharvest solutions in order to pro long vase life. Later on, they were kept in simulated transport conditions during a period of ten days; then, postharvest measurements were made in the Laboratory of Plant Physiology of the National University of Colombia, Bogotá. In the laboratory stems were kept in distilled water, under photoperiod conditions of 12 h (artificial light from 6 a.m. to 6 p.m. and with ventilation of 30 min in the morning hours to avoid ethylene accumulation. Environmental conditions of the laboratory were 19°C and relative humidity of 75%. The commercial preservative products used were: Silver Thiosulfate (STS elaborated in the farm, 1- Methylcyclopropene (I-MCP, Chrysal AVB, Chrysal EVB,
    Florissima 125, Florissima 135 and Florissant 100. The best
    results in florallongevity were obtained with the combination
    of l-MCP + Florissima 135 (22 days, Florissima 125 (21,7 days and STS (21,5 days. It was proven that sorne products that not contain the Ag ' ion (Florissima 135 and Chrysal EVB
    presented similar results as compared to the compounds that
    contained the Ag+ ion. Therefore, Florissima 135 and Chrysal
    EVB can be efficient in

  1. Occurrence of blockage in cut stems of Clematis L.

    Directory of Open Access Journals (Sweden)

    Agata Jędrzejuk

    2013-04-01

    Full Text Available During vase life of cut flowers obstructions in stem xylem vessels develop. Such obstructions may restrict water uptake in stems and its transport towards flowers, thus lowering their ornamental value and longevity. Clematis is a very attractive plant which can be used as a cut flower in floral compositions. However, nothing is known about the histochemical or cytolo- gical nature of xylem blockages occurring in cut stems of this plant. Observations carried out on Clematis cv. 'Solidarność' proved that tyloses appeared as a principal source of xylem blockage in cut stems. The preservative composed of 200 mg × dm-3 8-HQC (8-hydroxyquinolin citrate and 2% sucrose arre-sted development of xylem blockage, while the vessels in stems kept in water were filled with tyloses or an amorphic substance. PAS reaction proved that polysaccharides were present in the xylem occlusions, whereas no homogalacturonans were immunolocalized in tyloses using JIM 5 and JIM 7 antibodies. The present study provides new information on the origin of xylem occlusions in clematis and their development in two different vase solutions. Such information can be useful to develop pro- per postharvest treatments aiming to improve keeping qualities of this new cut flower.

  2. 7 CFR 58.413 - Cutting and packaging rooms.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Cutting and packaging rooms. 58.413 Section 58.413....413 Cutting and packaging rooms. When small packages of cheese are cut and wrapped, separate rooms shall be provided for the cleaning and preparation of the bulk cheese and for the cutting and wrapping...

  3. The role of the style as a sense-organ in relation to wilting of the flower.

    Science.gov (United States)

    Gilissen, L J

    1976-01-01

    Pollen tube growth in the style (Petunia ♀xNicotiana ♂) accelerated wilting. Pollination and germination on the stigmatic surface (Petunia ♀xAtropa ♂) did not change the stage of flowering in comparison with unpollinated flowers. Wilting of the corolla was accelerated by cutting off the stigma or cutting the style half-way down. Removal of the entire style also brought about an acceleration, however, to a lesser extent. The role of the style as a sense-organ with regard to the transmission of information from stigma and style to other flower organs is discussed.

  4. Composition of Carotenoids and Flavonoids in Narcissus Cultivars and their Relationship with Flower Color.

    Directory of Open Access Journals (Sweden)

    Xin Li

    Full Text Available Narcissus is widely used for cut flowers and potted plants, and is one of the most important commercial bulbous flowers in the floricultural industry. In this study, ten carotenoid and eighteen flavonoid compounds from the perianths and coronas of fifteen narcissus cultivars were measured by HPLC-APCI-MS/MS and UPLC-Q-TOF-MS/MS. Among these, six carotenoids, a total of seventeen flavonols and chlorogenic acid were identified in narcissus for the first time. A multivariate analysis was used to explore the relationship between flower color and pigment composition. We found that all-trans-violaxanthin and total carotenoid content were the main factors that affected flower color. These investigations could provide a global view of flower color formation and a theoretical basis for hybridization breeding in narcissus.

  5. Evaluation of HACCP system implementation on the quality of mixed fresh-cut salad prepared in a university canteen: a case study.

    Science.gov (United States)

    Osimani, Andrea; Aquilanti, Lucia; Clementi, Francesca

    2015-01-01

    The increasing awareness that foods can represent vehicles for health risk factors has caused scientists and public authorities to multiply their efforts to reduce these risks to within acceptable limits. Nevertheless, some challenging issues still remain unsolved and new ones have recently emerged, such as the increase in outbreaks of foodborne diseases originating from the consumption of meals at catering facilities. The study described in this article was aimed at evaluating the microbiological quality of mixed fresh-cut salads at an Italian university canteen operating in conformity with the hazard analysis and critical control point (HACCP) system. The effectiveness of the preventive and corrective measures taken was also assessed with respect to the frequency of unsatisfactory salad samples. During the investigation, E. coli, Salmonella spp., and Listeria monocytogenes were never detected. By contrast, a high number of samples exceeded the mandatory or suggested limits for food processing hygiene (in terms of mesophilic aerobes, coliforms, Staphylococcus aureus, Bacillus cereus, and sulfite-reducing clostridia counts). Despite the introduction of a series of preventive and corrective actions, the results were only partially satisfactory; this was most likely due to the impossibility of having available an adequate level of human resources that are indispensable to correctly putting the HACCP procedures into daily practice.

  6. Stop and Paint the Flowers.

    Science.gov (United States)

    Phillips, Shelley

    2002-01-01

    Describes an art lesson where students used watercolors to paint a flower bouquet arranged in a vase. Explains that the students viewed examples of flower bouquets by artists such as Vincent van Gogh and Odilon Redon. Discusses, in detail, the process of creating the artworks. (CMK)

  7. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Ergun Kuru; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira; Neelima Godugu

    2000-07-30

    ACTS flow loop is now operational under elevated pressure and temperature. Currently, experiments with synthetic based drilling fluids under pressure and temperature are being conducted. Based on the analysis of Fann 70 data, empirical correlations defining the shear stress as a function of temperature, pressure and the shear rate have been developed for Petrobras synthetic drilling fluids. PVT equipment has been modified for testing Synthetic oil base drilling fluids. PVT tests with Petrobras Synthetic base mud have been conducted and results are being analyzed Foam flow experiments have been conducted and the analysis of the data has been carried out to characterize the rheology of the foam. Comparison of pressure loss prediction from the available foam hydraulic models and the test results has been made. Cuttings transport experiments in horizontal annulus section have been conducted using air, water and cuttings. Currently, cuttings transport tests in inclined test section are being conducted. Foam PVT analysis tests have been conducted. Foam stability experiments have also been conducted. Effects of salt and oil concentration on the foam stability have been investigated. Design of ACTS flow loop modification for foam and aerated mud flow has been completed. A flow loop operation procedure for conducting foam flow experiments under EPET conditions has been prepared Design of the lab-scale flow loop for dynamic foam characterization and cuttings monitoring instrumentation tests has been completed. The construction of the test loop is underway. As part of the technology transport efforts, Advisory Board Meeting with ACTS-JIP industry members has been organized on May 13, 2000.

  8. Preparation and optimization of thermoelectric properties of Bi2Te3 based alloys using the waste particles as raw materials from the cutting process of the zone melting crystal rods

    Science.gov (United States)

    Xiang, Qiusheng; Fan, Xi'an; Han, Xuewu; Zhang, Chengcheng; Hu, Jie; Feng, Bo; Jiang, Chengpeng; Li, Guangqiang; Li, Yawei; He, Zhu

    2017-12-01

    The p-type Bi2Te3 alloys were prepared using the waste particles from the cutting process of the zone melting crystal rods as the main raw materials by impurity removal process including washing, carbon monoxide reduction and vacuum metallurgical process. The thermoelectric properties of the Bi2Te3 based bulk materials were optimized by component adjustment, second smelting and resistance pressing sintering (RPS) process. All evidences confirmed that most of impurities from the line cutting process and the oxidation such as Sb2O3, Bi2O3 and Bi2Te4O11 could be removed by carbon monoxide reduction and vacuum metallurgical process adopted in this work, and the recycling yield was higher than 97%. Appropriate component adjustment treatment was used to optimize the carrier content and corresponding thermoelectric properties. Lastly, a Bi0.36Sb1.64Te3 bulk was obtained and its power factor (PF) could reach 4.24 mW m-1 K-2 at 300 K and the average PF value was over 3.2 mW m-1 K-2 from 300 K to 470 K, which was equivalent with the thermoelectric performance of the zone melting products from high purity elements Bi, Te and Sb. It was worth mentioning that the recovery process introduced here was a simple, low-cost, high recovery rate and green recycling technology.

  9. Plasma arc cutting: speed and cut quality

    International Nuclear Information System (INIS)

    Nemchinsky, V A; Severance, W S

    2009-01-01

    When cutting metal with plasma arc cutting, the walls of the cut are narrower at the bottom than at the top. This lack of squareness increases as the cutting speed increases. A model of this phenomenon, affecting cut quality, is suggested. A thin liquid layer, which separates the plasma from the solid metal to be melted, plays a key role in the suggested model. This layer decreases heat transfer from the plasma to the solid metal; the decrease is more pronounced the higher the speed and the thicker the liquid metal layer. Since the layer is thicker at the bottom of the cut, the heat transfer effectiveness is lower at the bottom. The decrease in heat transfer effectiveness is compensated by the narrowness of the cut. The suggested model allows one to calculate the profile of the cut. The result of the calculations of the cutting speeds for plates of various thicknesses, at which the squareness of the cut is acceptable, agrees well with the speeds recommended by manufacturers. The second effect considered in the paper is the deflection of the plasma jet from the vertical at a high cutting speed. A qualitative explanation of this phenomenon is given. We believe the considerations of this paper are pertinent to other types of cutting with moving heat sources.

  10. Breeding Cut Roses for Better Keeping Quality: First Steps

    NARCIS (Netherlands)

    Fanourakis, D.; Carvalho, D.R.A.; Gitonga, V.W.; Heusden, van A.W.; Almeida, D.P.F.; Heuvelink, E.; Carvalho, S.M.P.

    2012-01-01

    Water stress is one of the most common postharvest quality problems, resulting in shorter vase life of cut flowers. Since vase life is a key factor for the consumers’ satisfaction, breeding for better control of water loss is an important goal. In this study, we evaluated the stomatal responses to

  11. Diversity of fungi colonizing leaves of Rhododendron (Rhododendron L. cuttings

    Directory of Open Access Journals (Sweden)

    Barbara Kierpiec-Baran

    2014-04-01

    Full Text Available Rhododendrons (Rhododendron L. are shrubs whose attractiveness is determined by their multi-coloured flowers and evergreen leaves. Necroses visible on the leaves of rhododendron cuttings diminish the suitability of nursery material for marketing. These symptoms are most frequently caused by fungi. The investigations were conducted in 2010–2011 in an ornamental shrub nursery to identify fungi colonizing the phyllosphere of rhododendron cuttings and causing leaf necroses. The material for analysis consisted of leaves of 11 rhododendron cultivars. 550 leaves were collected from 110 half-year-old cuttings for mycological analysis. Over 350 fungal colonies belonging to 15 species were isolated from the leaves of rhododendron cuttings. The dominants included: Pestalotiopsis sydowiana, Trichoderma koningii and Alternaria alternata. The influents included: Aspergillus brasiliensis, Mucor hiemalis f. hiemalis, Epicoccum nigrum, Sordaria fimicola and Umbelopsis isabellina. A large majority of the fungi preferred the phyllosphere environment of Yakushima rhododendron (R. yakushimanum cultivars ‘Sneezy’ and ‘Golden Torch’ as well as of the large-flowered cultivars ‘Flautando’, ‘Dominik’, and ‘Simona’. The phyllosphere of the large-flowered cultivars ‘Bernstein’, ‘Nova Zembla’, and ‘Goldbuckett’ was a reservoir for many fungal colonies and fungi species. The cultivars less susceptible to colonization by fungi and the most promising for planting in green areas and home gardens are the large-flowered cultivars ‘Bernstein’, ‘Nova Zembla’, ‘Goldbuckett’, ‘Rasputin’, and ‘Roseum Elegans’.

  12. The structure of flower visitation webs : how morphology and abundance affect interaction patterns between flowers and flower visitors

    NARCIS (Netherlands)

    Stang, Martina

    2007-01-01

    Interaction patterns between plants and flower visitors in a Mediterranean flower visitation web can be explained surprisingly well by the combination of two simple mechanisms. Firstly, the size threshold that the nectar tube depth of flowers puts on the tongue length of potential flower visitors;

  13. Say it with flowers: Flowering acceleration by root communication.

    Science.gov (United States)

    Falik, Omer; Hoffmann, Ishay; Novoplansky, Ariel

    2014-01-01

    The timing of reproduction is a critical determinant of fitness, especially in organisms inhabiting seasonal environments. Increasing evidence suggests that inter-plant communication plays important roles in plant functioning. Here, we tested the hypothesis that flowering coordination can involve communication between neighboring plants. We show that soil leachates from Brassica rapa plants growing under long-day conditions accelerated flowering and decreased allocation to vegetative organs in target plants growing under non-inductive short-day conditions. The results suggest that besides endogenous signaling and external abiotic cues, flowering timing may involve inter-plant communication, mediated by root exudates. The study of flowering communication is expected to illuminate neglected aspects of plant reproductive interactions and to provide novel opportunities for controlling the timing of plant reproduction in agricultural settings.

  14. Say it with flowers: Flowering acceleration by root communication

    OpenAIRE

    Falik, Omer; Hoffmann, Ishay; Novoplansky, Ariel

    2014-01-01

    The timing of reproduction is a critical determinant of fitness, especially in organisms inhabiting seasonal environments. Increasing evidence suggests that inter-plant communication plays important roles in plant functioning. Here, we tested the hypothesis that flowering coordination can involve communication between neighboring plants. We show that soil leachates from Brassica rapa plants growing under long-day conditions accelerated flowering and decreased allocation to vegetative organs i...

  15. High floral bud abscission and lack of open flower abscission in Dendrobium cv. Miss Teen: rapid reduction of ethylene sensitivity in the abscission zone

    NARCIS (Netherlands)

    Bunya-atichart, K.; Ketsa, S.; Doorn, van W.G.

    2006-01-01

    We studied the abscission of floral buds and open flowers in cut Dendrobium inflorescences. Abscission of floral buds was high and sensitive to ethylene in all cultivars studied. Many open flowers abscised in most cultivars, but cv. Willie exhibited only small amount of floral fall and cv. Miss Teen

  16. Multibeam Fibre Laser Cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    The appearance of the high power high brilliance fibre laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating cutting laser, the CO2-laser. However, quality problems in fibre......-laser cutting have until now limited its application in metal cutting. In this paper the first results of proof-of-principle studies applying a new approach (patent pending) for laser cutting with high brightness short wavelength lasers will be presented. In the approach, multi beam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from 2 single mode fibre lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W of single...

  17. Multibeam fiber laser cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove; Hansen, Klaus Schütt; Nielsen, Jakob Skov

    2009-01-01

    The appearance of the high power high brilliance fiber laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating Cutting laser, the CO2 laser. However, quality problems in fiber......-laser cutting have until now limited its application to metal cutting. In this paper the first results of proof-of-principle Studies applying a new approach (patent pending) for laser cutting with high brightness and short wavelength lasers will be presented. In the approach, multibeam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from two single mode fiber lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W...

  18. Recent Progress of Flower Colour Modification by Biotechnology

    Directory of Open Access Journals (Sweden)

    Steve Chandler

    2009-12-01

    Full Text Available Genetically-modified, colour-altered varieties of the important cut-flower crop carnation have now been commercially available for nearly ten years. In this review we describe the manipulation of the anthocyanin biosynthesis pathway that has lead to the development of these varieties and how similar manipulations have been successfully applied to both pot plants and another cut-flower species, the rose. From this experience it is clear that down- and up-regulation of the flavonoid and anthocyanin pathway is both possible and predictable. The major commercial benefit of the application of this technology has so far been the development of novel flower colours through the development of transgenic varieties that produce, uniquely for the target species, anthocyanins derived from delphinidin. These anthocyanins are ubiquitous in nature, and occur in both ornamental plants and common food plants. Through the extensive regulatory approval processes that must occur for the commercialization of genetically modified organisms, we have accumulated considerable experimental and trial data to show the accumulation of delphinidin based anthocyanins in the transgenic plants poses no environmental or health risk.

  19. Dynamics of flowering of artichoke globe (Cynara scolymus L. plants in depending on cultivation method

    Directory of Open Access Journals (Sweden)

    Andrzej Sałata

    2012-12-01

    Full Text Available The study was carried out in the years 2001-2002 in the Felin Research Center in Lublin. The differences in growth dynamics and morphology of flowering shoots were investigated with regards to a method of cultivation of artichoke. In the year 2001 flowering shoots and flowers occurred the earliest in the year 2001 on artichoke plants cultivated from crowns. In the year 2002 plants cultivated from crowns and transplants produced flowering shoots in the same time. Artichoke plants cultivated from transplants produced flowers earlier than those obtained from crowns. Plants grown from seeds sown in the ground did not produce flowering shoots. They remained as leaves through the whole vegetation period. Definitely more anthodiums produced plants those cultivated from crowns in comparison with obtained from transplants and seeds. Anthodiums which developed on shoots of plants cultivated from transplants and cuttings characterized bigger average height and diameter than anthodiums of plants cultivated from crowns. Artichoke plants differed in the number of leaves. More leaves of smaller length produced plants cultivated from transplants than plants obtained from cuttings and crowns.

  20. Bioactive compounds in edible flowers processed by radiation

    International Nuclear Information System (INIS)

    Koike, Amanda Cristina Ramos

    2015-01-01

    Edible flowers are increasingly being used in culinary preparations, being also recognized for their potential valuable effects in human health, which require new approaches to improve their conservation and safety. These highly perishable products should be grown without using any pesticide. Irradiation treatment might be the answer to these problems, ensuring food quality, increasing shelf-life and disinfestation of foods. Irradiation treatment might be the answer to these problems, to ensure food quality, to increase shelf-life and disinfestation of foods. Tropaeolum majus L. (nasturtium) and Viola tricolor L. (johnny-jump-up) flowers are widely used in culinary preparations, being also acknowledged for their antioxidant properties and high content of phenolics. The purpose of this study was to evaluate the dose-dependent effects of gamma and electron beam irradiation (doses of 0, 0.5, 0.8 and 1 kGy) on the antioxidant activity, phenolic compounds, physical aspects and antiproliferative potential of edible flowers. Kaempferol-O-hexoside-O-hexoside was the most abundant compound in all samples of Tropaeolum majus flower while pelargonidin-3-O-sophoroside was the major anthocyanin. In general, irradiated samples gave higher antioxidant activity, probably due to their higher amounts of phenolic compounds, which were also favored by the 1.0 kGy dose, regardless of the source . The Viola tricolor samples displayed flavonols as the most abundant phenolic compounds, particularly those derived from quercetin. In general, gamma-irradiated samples, independently of the applied dose, showed higher amounts in phenolic compounds, which were also favored by the 1.0 kGy dose, regardless of the source. The antioxidant activity was also higher among irradiated samples. The two species of edible flowers have not provided the samples did not show potential antiproliferative and cytotoxicity. Accordingly, the applied irradiation treatments seemed to represent a feasible technology

  1. Cutting state identification

    International Nuclear Information System (INIS)

    Berger, B.S.; Minis, I.; Rokni, M.

    1997-01-01

    Cutting states associated with the orthogonal cutting of stiff cylinders are identified through an analysis of the singular values of a Toeplitz matrix of third order cumulants of acceleration measurements. The ratio of the two pairs of largest singular values is shown to differentiate between light cutting, medium cutting, pre-chatter and chatter states. Sequences of cutting experiments were performed in which either depth of cut or turning frequency was varied. Two sequences of experiments with variable turning frequency and five with variable depth of cut, 42 cutting experiments in all, provided a database for the calculation of third order cumulants. Ratios of singular values of cumulant matrices find application in the analysis of control of orthogonal cutting

  2. Flexible Laser Metal Cutting

    DEFF Research Database (Denmark)

    Villumsen, Sigurd; Jørgensen, Steffen Nordahl; Kristiansen, Morten

    2014-01-01

    This paper describes a new flexible and fast approach to laser cutting called ROBOCUT. Combined with CAD/CAM technology, laser cutting of metal provides the flexibility to perform one-of-a-kind cutting and hereby realises mass production of customised products. Today’s laser cutting techniques...... possess, despite their wide use in industry, limitations regarding speed and geometry. Research trends point towards remote laser cutting techniques which can improve speed and geometrical freedom and hereby the competitiveness of laser cutting compared to fixed-tool-based cutting technology...... such as punching. This paper presents the concepts and preliminary test results of the ROBOCUT laser cutting technology, a technology which potentially can revolutionise laser cutting....

  3. Ethylene biosynthesis genes are differentially expressed during carnation (Dianthus caryophyllus L.) flower senescence.

    NARCIS (Netherlands)

    Have, ten A.; Woltering, E.J.

    1997-01-01

    Ethylene production and expression patterns of an 1-aminocyclopropane-1-carboxylic acid (ACC) oxidase (CARAO1) and of two ACC synthase (EC 4.4.1.14) genes (CARACC3 and CARAS1) were studied in floral organs of cut carnation flowers (Dianthus caryophyllus L.) cv. White Sim. During the vase life and

  4. Effect of the different timing of AMF inoculation on plant growth and flower quality of chrysanthemum

    NARCIS (Netherlands)

    Sohn, B.K.; Kim, K.Y.; Chung, S.J.; Kim, W.S.; Park, S.M.; Kang, J.G.; Rim, Y.S.; Cho, J.S.; Kim, T.H.; Lee, J.H.

    2003-01-01

    Plant growth and flower quality of an ornamental plant (Chrysanthemum morifolium Ramat) var. Baekgwang in response to the different timing of arbuscular mycorrhizal fungi (AMF) inoculation were examined. To evaluate the effects of AMF inoculation timing on growth of chrysanthemum cuttings, AMF was

  5. Development of a molecular test to ensure good flowering of Viburnum Opulus Var. Roseum

    NARCIS (Netherlands)

    Kromwijk, J.A.M.; Noort, van F.R.; Verhoef, N.; Balk, P.; Wordragen, van M.F.

    2013-01-01

    During wintertime Viburnum opulus var. roseum (snowball) shrubs are forced in warm greenhouses to harvest early cut flowers. Early forcing is occasionally unsuccessful. This is probably due to a lack of hours with low temperatures that is needed to break bud dormancy. To gain more insight about the

  6. Flower opening and vase life of gladiolus cultivars: the sensitivity to ethylene and the carbohydrate content

    Directory of Open Access Journals (Sweden)

    Lucas Cavalcante da Costa

    2016-08-01

    Full Text Available Vase life is one of the most important characteristics in the quality of cut flowers. The carbohydrate content of petals from each cultivar can be a decisive factor to vase life of gladiolus flowers. Despite exposure to ethylene does not affect the life of open florets of gladiolus flowers, it may reduce the flower’s commercial life due the occurrence of flower buds abortion. This study thus aimed to evaluate the flower opening and the vase life of gladiolus flowers according to ethylene sensitivity and carbohydrate content of each cultivar. The gladiolus cultivars used in Experiment I were  ‘Amsterdam’, ‘Blue Frost’, ‘Gold Field’, ‘Green Star’, ‘Jester’, ‘Lavender’, ‘Red Beauty’, ‘Rose Supreme’, ‘Traderhorn’, and ‘Verônica’. Stems were stored in airtight chambers and exposed to the ethylene concentrations of 0, 0.1, 1.0, 10, 100, and 1000 μL L−1 for 24 h. Subsequently, flower stem were placed in a test tube with distilled water when were evaluated for percentage of flower opening and vase life. In Experiment II, three cultivars (‘Amsterdam’, ‘Red Beauty’, and ‘Verônica’ were chosen based on the lowest, medium, and highest vase life in Experiment I, respectively. Total soluble sugars, reducing sugars, and starch contents were evaluated in five flower developmental stages. No effect of ethylene on the flower opening or alterations in flower opening between cultivars. The vase life of gladiolus flowers differed between cultivars regardless of ethylene action. ‘Verônica’ and ‘Amsterdam’, which had the highest and lowest vase life, respectively, differed as to the total soluble sugar content. Ethylene does not influence the flower opening or vase life of the gladiolus cultivars studied. In these cultivars, the maintenance of flower opening is attributed to total soluble sugars content, which, in turn, is a major determinant of the vase life.

  7. Tolerance of edible flowers to gamma irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Koike, Amanda C.R.; Araujo, Michel M.; Costa, Helbert S.F.; Almeida, Mariana C.; Villavicencio, Anna Lucia C.H., E-mail: ackoike@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP) Sao Paulo, SP (Brazil)

    2011-07-01

    People have been eating flowers and using them in culinary creations for hundreds of years. Edible flowers are increasingly being used in meals as an ingredient in salads or garnish, entrees, drinks and desserts. The irradiation process is an alternative method that can be used in disinfestation of food and flowers, using doses that do not damage the product. The sensitivity of flowers to irradiation varies from species to species. In the present research was irradiated with doses up to 1 kGy some edible flowers to examine their physical tolerance to gamma-rays. Furthermore, high doses gamma irradiation causes petal withering, browning process and injury in edible flowers. (author)

  8. Tolerance of edible flowers to gamma irradiation

    International Nuclear Information System (INIS)

    Koike, Amanda C.R.; Araujo, Michel M.; Costa, Helbert S.F.; Almeida, Mariana C.; Villavicencio, Anna Lucia C.H.

    2011-01-01

    People have been eating flowers and using them in culinary creations for hundreds of years. Edible flowers are increasingly being used in meals as an ingredient in salads or garnish, entrees, drinks and desserts. The irradiation process is an alternative method that can be used in disinfestation of food and flowers, using doses that do not damage the product. The sensitivity of flowers to irradiation varies from species to species. In the present research was irradiated with doses up to 1 kGy some edible flowers to examine their physical tolerance to gamma-rays. Furthermore, high doses gamma irradiation causes petal withering, browning process and injury in edible flowers. (author)

  9. ANALYSIS OF CUTTING FORCES ON CNC LATHES EXPERIMENTAL APPROACH

    Directory of Open Access Journals (Sweden)

    Erdem Koç

    1996-01-01

    Full Text Available Objective of this study is to make use easy programming of CNC lathes and to achieve the optimization of part program prepared considering the limiting parameters of the machine. In the present study, a BOXFORD 250 B CNC lathe has been used for experiment and optimization process. The measurement of cutting forces exerted on the cutting tool of CNC lathe has been performed. The cutting forces occurring during the turning operation have been determined for different depth of" cut, feed rate and cutting speed as well as different cutting tools and related data base has been obtained.

  10. Welding and cutting

    International Nuclear Information System (INIS)

    Drews, P.; Schulze Frielinghaus, W.

    1978-01-01

    This is a survey, with 198 literature references, of the papers published in the fields of welding and cutting within the last three years. The subjects dealt with are: weldability of the materials - Welding methods - Thermal cutting - Shaping and calculation of welded joints - Environmental protection in welding and cutting. (orig.) [de

  11. Reduction of Allergenicity of Litchi chinensis Flowers Pollen Protein Conjugated with Polysaccharide by Maillard Reaction

    Directory of Open Access Journals (Sweden)

    Ranajit Kumar Shaha

    2012-04-01

    Full Text Available Background: Allergy to pollen from gymnosperms is well documented in the west. The objective was to define the allergologic protein from Litchi chinensis (Litchi pollen and conjugate the protein with polysaccharides by Maillard reaction to reduce the allergic effect of that protein. Methods: Total soluble proteins were extracted from the pollen of Litchi flower pollen and subjected to ammonium sulphate precipitation at 80% saturation. Pollen antigen from Litchi chinensis (Litchi was prepared by gel cutting method and characterized by biochemical and designated by LFPP. The homogeneity of this protein was demonstrated by a single band on SDS-PAGE. The protein then conjugated with galactomannan through Maillard Reaction. The resulting purified pollen protein and conjugated protein were administered to the Swiss albino mice as amount of 5.8mg/kg body weight. Results: The total protein was then separated on a 12% SDS-Polyacrylamide gel which revealed 5 bands between molecular weight range of 29kDa and 69kDa. Each band was recovered from the gel by electroelution and sent for skin tests. 28kDa proteins was the only allergenic protein while others were not shown reactivity in patients. Intraperitoneal injection of the purified protein (LFPP caused a significant rise in the levels of neutrophils (38-81% and eosinophils (3-14% compared to control (P < 0.001 whereas conjugated protein caused only a 2% increase of both neutrophils and eosinophils level. On the other hand treatment with LFPP-galactomannan conjugate causes no such change in physical appearance with eosinophils and neutrophils level. Conclusion: The present study demonstrates that the protein extracted and purified from Litchi flowers pollen has been recognized as a new allergen from Bangladesh for the first time and the allergic effects can be reduced by conjugation with polysaccharides.

  12. Induction of single flower mutant in Hibiscus cv. 'Alipur Beauty'

    International Nuclear Information System (INIS)

    Banerji, B.K.; Datta, S.K.

    1986-01-01

    Stem cuttings of Hibicus cv. 'Alipur Beauty' were irradiated with 0, 1.0, 2.0 Krad of gamma rays in 60 Co source and planted just after irradiation. Data were recorded on days to sprout, number of sprouts, sprouting percentage, survival, plant height, leaf number and size, abnormal leaves and plants, floral abnormalities and induction of somatic mutations in flower colour/form. Some of the characters like plant height, leaf number, abnormal leaves and plants and leaf size were recorded after 60 and 120 days. 7 refs. (author)

  13. The effect of gamma irradiation on the growth and flowering of stem chrysanthemum (chrysanthemum morifolium ramat.) cv. pink fiji

    International Nuclear Information System (INIS)

    Ita Dwimahyani

    2007-01-01

    Rooted shoot cuttings have been irradiated by gamma rays with 0, 10, 15, 20 and 25 Gy doses, and then planted in green house on Gadog, Ciawi. Plant growth from each doses proved to be varied, both in height and flowering process. Plants with dose 15 Gy and higher had shown late flowering time and dwarfing. The optimal dose for chrysanthemum cv. Pink Fiji irradiation is suggested to be 10-15 Gy. The highest mutation frequency shown on flower color is yellow, followed by orange, white, dark pink and light pink. (author)

  14. The effect of homeopathic preparations on the activity level of Acromyrmex leaf-cutting ants=Atividade de formigas cortadeiras Acromyrmex spp. submetidas a preparações homeopáticas

    Directory of Open Access Journals (Sweden)

    Pedro Boff

    2012-10-01

    Full Text Available The effect of homeopathic preparations on the activities of the leaf-cutting ants Acromyrmex spp. was studied. A field experiment involving ant nests in six experimental areas was performed using a randomised complete block design. Within each block, every ant nest was considered to represent one repetition. The treatments consisted of the following: Belladonna homeopathic preparations of macerated or triturated Acromyrmex spp. adults, homeopathic preparations of macerated or triturated ant nest fungus (Leucoagaricus gongylophorus collected from Acromyrmex laticeps and Acromyrmex heyeri nests, a homeopathy Belladonna, and dynamised water. All of the homeopathic treatments were tested at the 30 CH (thirtieth centesimal Hahnemannian dynamisation. An untreated nest served as the control. The total number of ants from each trail was counted, including both those carrying or not-carrying green plant fragments, immediately before the daily homeopathic applications. All of the tested homeopathic preparations, except for the water, significantly reduced the activity level of Acromyrmex spp. The homeopathic preparations of Belladonna and the macerated nosodes of Acromyrmex spp. reduced the activity level of the ants beginning with the sixth day after the first treatment application; the activity level reduction effect lasted more than 20 days after the last application.O efeito de preparados homeopáticos sobre as atividades de formigas cortadeiras Acromyrmex spp. foi estudado. O experimento foi realizado no campo, utilizando formigueiros distribuídos em seis diferentes áreas. Em cada área cada, formigueiro foi considerado uma repetição. Os tratamentos consistiram de preparados homeopáticos obtidos da tintura-mãe dos triturados e macerados de adultos de Acromyrmex spp. e do fungo Leucoagaricus gongylophorus de formigueiros de Acromyrmex laticeps e Acromyrmex heyeri. A homeopatia Belladonna e água dinamizada também foram testados. Todos os

  15. Device for cutting protrusions

    Science.gov (United States)

    Bzorgi, Fariborz M [Knoxville, TN

    2011-07-05

    An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

  16. Thrips (Thysanoptera) of coffee flowers

    Science.gov (United States)

    A survey of thrips (Thysanoptera) associated with coffee flowers was conducted in coffee plantations in Chiapas, Mexico. The main objectives were to identify them and to determine whether they were carrying coffee pollen grains. A total of 40 thrips species in 22 genera were identified. The most com...

  17. Pyrethrum flowers and pyrethroid insecticides.

    OpenAIRE

    Casida, J E

    1980-01-01

    The natural pyrethrins from the daisy-like flower, Tanacetum or Chrysanthemum cinerariifolium, are nonpersistent insecticides of low toxicity to mammals. Synthetic analogs or pyrethroids, evolved from the natural compounds by successive isosteric modifications, are more potent and stable and are the newest important class of crop protection chemicals. They retain many of the favorable properties of the pyrethrins.

  18. Notes on collecting flower-visiting insects

    NARCIS (Netherlands)

    Willemstein, S.C.

    1974-01-01

    Flower-visiting insects may play a role in the pollination of the flowers they visit. An important indication for this is the pollen they carry on their body. The transport of pollen does not prove pollination without observations of the behaviour of the insects on the flowers, but at least it

  19. Colorimetric analysis of edible flower of Tropaeolum majus processed by ionizing radiation

    Energy Technology Data Exchange (ETDEWEB)

    Koike, Amanda Cristina Ramos; Rodrigues, Flavio Thihara; Villavicencio, Anna Lucia Casanas Haasis, E-mail: ackoike@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    Edible flowers are increasingly being used in culinary preparations. These highly perishable products should be grown without using any chemical pesticide. Irradiation treatment might be the answer to these problems, ensuring food quality, increasing shelf-life and disinfestation of foods. Tropaeolum majus L. (nasturtium) flowers are widely used in culinary preparations, The purpose of this study was to evaluate the dose-dependent effects of gamma and electron beam irradiation (doses of 0, 0.5, 0.8 and 1 kGy) on edible flowers using colorimeter (Konica Minolta Chroma Meter CR-400), were used samples of T.majus in orange, the petals of the flowers were used for the chromaticity value. The samples of irradiated processed showed no significantly difference when compared to the control sample. (author)

  20. Colorimetric analysis of edible flower of Tropaeolum majus processed by ionizing radiation

    International Nuclear Information System (INIS)

    Koike, Amanda Cristina Ramos; Rodrigues, Flavio Thihara; Villavicencio, Anna Lucia Casanas Haasis

    2015-01-01

    Edible flowers are increasingly being used in culinary preparations. These highly perishable products should be grown without using any chemical pesticide. Irradiation treatment might be the answer to these problems, ensuring food quality, increasing shelf-life and disinfestation of foods. Tropaeolum majus L. (nasturtium) flowers are widely used in culinary preparations, The purpose of this study was to evaluate the dose-dependent effects of gamma and electron beam irradiation (doses of 0, 0.5, 0.8 and 1 kGy) on edible flowers using colorimeter (Konica Minolta Chroma Meter CR-400), were used samples of T.majus in orange, the petals of the flowers were used for the chromaticity value. The samples of irradiated processed showed no significantly difference when compared to the control sample. (author)

  1. INVESTIGATION OF DIURETIC ACTIVITY OF PHYTOPREPARATIONS OF CALENDULA OFFICINALIS L. FLOWERS

    OpenAIRE

    V. A. Kurkin; A. V. Kurkina; E. N. Zaitсeva; A. V. Dubishchev; P. V. Afanasyeva

    2016-01-01

    The flowers of the pot marigold (Calendula officinalis L.) are part of combination herbal medicinal preparations which applied in the treatment of diseases of the hepatobiliary system, gastrointestinal tract, diseases of kidneys and the urinary tract, such as «Fitonephrol» («Urological tea»). Calendula flowers make a contribution in the total therapeutic activity of «Urological tea» as a component which has anti-inflammatory and reparative properties. As is widely known that phytopharmaceutic...

  2. Wild bees preferentially visit Rudbeckia flower heads with exaggerated ultraviolet absorbing floral guides.

    Science.gov (United States)

    Horth, Lisa; Campbell, Laura; Bray, Rebecca

    2014-03-15

    Here, we report on the results of an experimental study that assessed the visitation frequency of wild bees to conspecific flowers with different sized floral guides. UV absorbent floral guides are ubiquitous in Angiosperms, yet surprisingly little is known about conspecific variation in these guides and very few studies have evaluated pollinator response to UV guide manipulation. This is true despite our rich understanding about learning and color preferences in bees. Historical dogma indicates that flower color serves as an important long-range visual signal allowing pollinators to detect the flowers, while floral guides function as close-range signals that direct pollinators to a reward. We initiated the work presented here by first assessing the population level variation in UV absorbent floral guides for conspecific flowers. We assessed two species, Rudbeckia hirta and R. fulgida. We then used several petal cut-and-paste experiments to test whether UV floral guides can also function to attract visitors. We manipulated floral guide size and evaluated visitation frequency. In all experiments, pollinator visitation rates were clearly associated with floral guide size. Diminished floral guides recruited relatively few insect visitors. Exaggerated floral guides recruited more visitors than smaller or average sized guides. Thus, UV floral guides play an important role in pollinator recruitment and in determining the relative attractiveness of conspecific flower heads. Consideration of floral guides is therefore important when evaluating the overall conspicuousness of flower heads relative to background coloration. This work raises the issue of whether floral guides serve as honest indicators of reward, since guide size varies in nature for conspecific flowers at the same developmental stage and since preferences for larger guides were found. To our knowledge, these are the first cut-and-paste experiments conducted to examine whether UV absorbent floral guides affect

  3. Wild bees preferentially visit Rudbeckia flower heads with exaggerated ultraviolet absorbing floral guides

    Directory of Open Access Journals (Sweden)

    Lisa Horth

    2014-07-01

    Full Text Available Here, we report on the results of an experimental study that assessed the visitation frequency of wild bees to conspecific flowers with different sized floral guides. UV absorbent floral guides are ubiquitous in Angiosperms, yet surprisingly little is known about conspecific variation in these guides and very few studies have evaluated pollinator response to UV guide manipulation. This is true despite our rich understanding about learning and color preferences in bees. Historical dogma indicates that flower color serves as an important long-range visual signal allowing pollinators to detect the flowers, while floral guides function as close-range signals that direct pollinators to a reward. We initiated the work presented here by first assessing the population level variation in UV absorbent floral guides for conspecific flowers. We assessed two species, Rudbeckia hirta and R. fulgida. We then used several petal cut-and-paste experiments to test whether UV floral guides can also function to attract visitors. We manipulated floral guide size and evaluated visitation frequency. In all experiments, pollinator visitation rates were clearly associated with floral guide size. Diminished floral guides recruited relatively few insect visitors. Exaggerated floral guides recruited more visitors than smaller or average sized guides. Thus, UV floral guides play an important role in pollinator recruitment and in determining the relative attractiveness of conspecific flower heads. Consideration of floral guides is therefore important when evaluating the overall conspicuousness of flower heads relative to background coloration. This work raises the issue of whether floral guides serve as honest indicators of reward, since guide size varies in nature for conspecific flowers at the same developmental stage and since preferences for larger guides were found. To our knowledge, these are the first cut-and-paste experiments conducted to examine whether UV absorbent

  4. Extension without Cut

    OpenAIRE

    Straßburger , Lutz

    2012-01-01

    International audience; In proof theory one distinguishes sequent proofs with cut and cut-free sequent proofs, while for proof complexity one distinguishes Frege-systems and extended Frege-systems. In this paper we show how deep inference can provide a uniform treatment for both classifications, such that we can define cut-free systems with extension, which is neither possible with Frege-systems, nor with the sequent calculus. We show that the propositional pigeon-hole principle admits polyno...

  5. Underwater cutting techniques developments

    International Nuclear Information System (INIS)

    Bach, F.-W.

    1990-01-01

    The primary circuit structures of different nuclear powerplants are constructed out of stainless steels, ferritic steels, plated ferritic steels and alloys of aluminium. According to the level of the specific radiation of these structures, it is necessary for dismantling to work with remote controlled cutting techniques. The most successful way to protect the working crew against exposure of radiation is to operate underwater in different depths. The following thermal cutting processes are more or less developed to work under water: For ferritic steels only - flame cutting; For ferritic steels, stainless steels, cladded steels and aluminium alloys - oxy-arc-cutting, arc-waterjet-cutting with a consumable electrode, arc-saw-cutting, plasma-arc-cutting and plasma-arc-saw. The flame cutting is a burning process, all the other processes are melt-cutting processes. This paper explains the different techniques, giving a short introduction of the theory, a discussion of the possibilities with the advantages and disadvantages of these processes giving a view into the further research work in this interesting field. (author)

  6. Effects of flowering phenology and synchrony on the reproductive success of a long-flowering shrub

    Science.gov (United States)

    Rodríguez-Pérez, Javier; Traveset, Anna

    2016-01-01

    Flowering phenology and synchrony with biotic and abiotic resources are crucial traits determining the reproductive success in insect-pollinated plants. In seasonal climates, plants flowering for long periods should assure reproductive success when resources are more predictable. In this work, we evaluated the relationship between flowering phenology and synchrony and reproductive success in Hypericum balearicum, a shrub flowering all year round but mainly during spring and summer. We studied two contrasting localities (differing mostly in rainfall) during 3 years, and at different biological scales spanning from localities to individual flowers and fruits. We first monitored (monthly) flowering phenology and reproductive success (fruit and seed set) of plants, and assessed whether in the locality with higher rainfall plants had longer flowering phenology and synchrony and relatively higher reproductive success within or outside the flowering peak. Secondly, we censused pollinators on H. balearicum individuals and measured reproductive success along the flowering peak of each locality to test for an association between (i) richness and abundance of pollinators and (ii) fruit and seed set, and seed weight. We found that most flowers (∼90 %) and the highest fruit set (∼70 %) were produced during the flowering peak of each locality. Contrary to expectations, plants in the locality with lower rainfall showed more relaxed flowering phenology and synchrony and set more fruits outside the flowering peak. During the flowering peak of each locality, the reproductive success of early-flowering individuals depended on a combination of both pollinator richness and abundance and rainfall; by contrast, reproductive success of late-flowering individuals was most dependent on rainfall. Plant species flowering for long periods in seasonal climates, thus, appear to be ideal organisms to understand how flowering phenology and synchrony match with biotic and abiotic resources, and

  7. Cutting Method of the CAD model of the Nuclear facility for Dismantling Simulation

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ikjune; Choi, ByungSeon; Hyun, Dongjun; Jeong, KwanSeong; Kim, GeunHo; Lee, Jonghwan [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    Current methods for process simulation cannot simulate the cutting operation flexibly. As is, to simulate a cutting operation, user needs to prepare the result models of cutting operation based on pre-define cutting path, depth and thickness with respect to a dismantle scenario in advance. And those preparations should be built again as scenario changes. To be, user can change parameters and scenarios dynamically within a simulation configuration process so that the user saves time and efforts to simulate cutting operations. This study presents the methodology of cutting operation which can be applied to all the procedure in the simulation of dismantling of nuclear facilities. We developed the cutting simulation module for cutting operation in the dismantling of the nuclear facilities based on proposed cutting methodology. We defined the requirement of model cutting methodology based on the requirement of the dismantling of nuclear facilities. And we implemented cutting simulation module based on API of the commercial CAD system.

  8. Behavior of piles and indolbutyric or homeopathic prepared acid Arnica montana spread of false-erica

    Directory of Open Access Journals (Sweden)

    Darcieli Aparecida Cassol

    2017-06-01

    Full Text Available The market for flowers and ornamental plants is growing. Since the false-érica (Cuphea gracilis is a plant with many uses in the landscape, adapting to partial shade or full sun can be used for ground covers or chromatic combinations with other plants. Usually, the false-erica is propagated by seeds or by cuttings. The objective of this study was to evaluate the size of stakes and the concentration of IBA (indole butyric acid and prepared homeopathic base of Arnica montana in rooting false-erica stakes. The collection of cuttings was carried out in arrays plants grown in gardens in standard sizes 6 and 12 cm in length, and were treated with IBA at concentrations of 0; 1.000 and 2.000 mg L-1 in addition to the homeopathic preparation A. montana 12 CH. The experiment was conducted in a completely randomized design in a 2x4 factorial [length x stake stimulant treatment], with 4 replications of 10 cuttings per plot. After 45 days, they were evaluated percentage of rooted and dead cuttings, root length (cm, number of shoots and number of leaves. The concentrations of AIB, and the application of homeopathy stimulated the adventitious rooting processes of this kind.

  9. Efikasi Chitosan untuk Memperpanjang Flower Longevity Bunga Anggrek Dendrobium Hibrida dalam Pot (Potted Flower

    Directory of Open Access Journals (Sweden)

    I MADE SUKEWIJAYA

    2015-09-01

    Full Text Available Effication of Chitosan on Lengthening The Flower Longevity of Potted Orchid ofDendrobium Hybrid. The aim of the current research is to investigate general effects of Chitosantreatment on the flowering of Dendrobium orchid and to find out the optimum concentration of Chitosanin lengthening flower longevity of potted orchid of Dendrobium hybrid. Results of the research showedthat Chitosan application significantly affected variables of the number of flower per-plant, the length ofindividual flower, period of time to get full blooming, and the flower longevity. The best results for thoseof variables was achieved with Chitosan concentration of 0.15%.

  10. Flowers and Wild Megachilid Bees Share Microbes.

    Science.gov (United States)

    McFrederick, Quinn S; Thomas, Jason M; Neff, John L; Vuong, Hoang Q; Russell, Kaleigh A; Hale, Amanda R; Mueller, Ulrich G

    2017-01-01

    Transmission pathways have fundamental influence on microbial symbiont persistence and evolution. For example, the core gut microbiome of honey bees is transmitted socially and via hive surfaces, but some non-core bacteria associated with honey bees are also found on flowers, and these bacteria may therefore be transmitted indirectly between bees via flowers. Here, we test whether multiple flower and wild megachilid bee species share microbes, which would suggest that flowers may act as hubs of microbial transmission. We sampled the microbiomes of flowers (either bagged to exclude bees or open to allow bee visitation), adults, and larvae of seven megachilid bee species and their pollen provisions. We found a Lactobacillus operational taxonomic unit (OTU) in all samples but in the highest relative and absolute abundances in adult and larval bee guts and pollen provisions. The presence of the same bacterial types in open and bagged flowers, pollen provisions, and bees supports the hypothesis that flowers act as hubs of transmission of these bacteria between bees. The presence of bee-associated bacteria in flowers that have not been visited by bees suggests that these bacteria may also be transmitted to flowers via plant surfaces, the air, or minute insect vectors such as thrips. Phylogenetic analyses of nearly full-length 16S rRNA gene sequences indicated that the Lactobacillus OTU dominating in flower- and megachilid-associated microbiomes is monophyletic, and we propose the name Lactobacillus micheneri sp. nov. for this bacterium.

  11. Cutting Class Harms Grades

    Science.gov (United States)

    Taylor, Lewis A., III

    2012-01-01

    An accessible business school population of undergraduate students was investigated in three independent, but related studies to determine effects on grades due to cutting class and failing to take advantage of optional reviews and study quizzes. It was hypothesized that cutting classes harms exam scores, attending preexam reviews helps exam…

  12. Fundamentals of cutting.

    Science.gov (United States)

    Williams, J G; Patel, Y

    2016-06-06

    The process of cutting is analysed in fracture mechanics terms with a view to quantifying the various parameters involved. The model used is that of orthogonal cutting with a wedge removing a layer of material or chip. The behaviour of the chip is governed by its thickness and for large radii of curvature the chip is elastic and smooth cutting occurs. For smaller thicknesses, there is a transition, first to plastic bending and then to plastic shear for small thicknesses and smooth chips are formed. The governing parameters are tool geometry, which is principally the wedge angle, and the material properties of elastic modulus, yield stress and fracture toughness. Friction can also be important. It is demonstrated that the cutting process may be quantified via these parameters, which could be useful in the study of cutting in biology.

  13. Flower, fruit phenology and flower traits in Cordia boissieri (Boraginaceae from northeastern Mexico

    Directory of Open Access Journals (Sweden)

    Cristian Adrian Martínez-Adriano

    2016-05-01

    Full Text Available We characterized variations in Cordia boissieri flowers and established if these variations occur between plants or between flowering events. Flowering and fruiting was measured for 256 plants. A GLM test was used to determine the relationship between flowering and fruit set processes and rainfall. We performed measurements of floral traits to detect variations within the population and between flowering events. The position of the anthers with respect to the ovary was determined in 1,500 flowers. Three out of four flowering events of >80% C. boissieri plants occurred after rainfall events. Only one flowering event occurred in a drought. Most plants flowered at least twice a year. The overlapping of flowering and fruiting only occurred after rainfall. Anthesis lasted three-to-five days, and there were two flower morphs. Half of the plants had longistylus and half had brevistylus flowers. Anacahuita flower in our study had 1–4 styles; 2–9 stamens; 6.5–41.5 mm long corolla; sepals from 4.5–29.5 mm in length; a total length from 15.5–59 mm; a corolla diameter from 10.5–77 mm. The nectar guide had a diameter from 5–30.5 mm; 4–9 lobes; and 5 distinguishable nectar guide colors. The highest variation of phenotypic expression was observed between plants.

  14. Flower, fruit phenology and flower traits in Cordia boissieri (Boraginaceae) from northeastern Mexico.

    Science.gov (United States)

    Martínez-Adriano, Cristian Adrian; Jurado, Enrique; Flores, Joel; González-Rodríguez, Humberto; Cuéllar-Rodríguez, Gerardo

    2016-01-01

    We characterized variations in Cordia boissieri flowers and established if these variations occur between plants or between flowering events. Flowering and fruiting was measured for 256 plants. A GLM test was used to determine the relationship between flowering and fruit set processes and rainfall. We performed measurements of floral traits to detect variations within the population and between flowering events. The position of the anthers with respect to the ovary was determined in 1,500 flowers. Three out of four flowering events of >80% C. boissieri plants occurred after rainfall events. Only one flowering event occurred in a drought. Most plants flowered at least twice a year. The overlapping of flowering and fruiting only occurred after rainfall. Anthesis lasted three-to-five days, and there were two flower morphs. Half of the plants had longistylus and half had brevistylus flowers. Anacahuita flower in our study had 1-4 styles; 2-9 stamens; 6.5-41.5 mm long corolla; sepals from 4.5-29.5 mm in length; a total length from 15.5-59 mm; a corolla diameter from 10.5-77 mm. The nectar guide had a diameter from 5-30.5 mm; 4-9 lobes; and 5 distinguishable nectar guide colors. The highest variation of phenotypic expression was observed between plants.

  15. Frost flowers on young Arctic sea ice: The climatic, chemical, and microbial significance of an emerging ice type

    Science.gov (United States)

    Barber, D. G.; Ehn, J. K.; Pućko, M.; Rysgaard, S.; Deming, J. W.; Bowman, J. S.; Papakyriakou, T.; Galley, R. J.; Søgaard, D. H.

    2014-10-01

    Ongoing changes in Arctic sea ice are increasing the spatial and temporal range of young sea ice types over which frost flowers can occur, yet the significance of frost flowers to ocean-sea ice-atmosphere exchange processes remains poorly understood. Frost flowers form when moisture from seawater becomes available to a cold atmosphere and surface winds are low, allowing for supersaturation of the near-surface boundary layer. Ice grown in a pond cut in young ice at the mouth of Young Sound, NE Greenland, in March 2012, showed that expanding frost flower clusters began forming as soon as the ice formed. The new ice and frost flowers dramatically changed the radiative and thermal environment. The frost flowers were about 5°C colder than the brine surface, with an approximately linear temperature gradient from their base to their upper tips. Salinity and δ18O values indicated that frost flowers primarily originated from the surface brine skim. Ikaite crystals were observed to form within an hour in both frost flowers and the thin pond ice. Average ikaite concentrations were 1013 µmol kg-1 in frost flowers and 1061 µmol kg-1 in the surface slush layer. Chamber flux measurements confirmed an efflux of CO2 at the brine-wetted sea ice surface, in line with expectations from the brine chemistry. Bacteria concentrations generally increased with salinity in frost flowers and the surface slush layer. Bacterial densities and taxa indicated that a selective process occurred at the ice surface and confirmed the general pattern of primary oceanic origin versus negligible atmospheric deposition.

  16. Analysis on antioxidant activity by orac method in Viola tricolor l. flowers processed by ionizing radiation

    Energy Technology Data Exchange (ETDEWEB)

    Koike, Amanda Cristina Ramos; Silva, Pamela Galo da; Villavicencio, Anna Lucia Casanas Haasis, E-mail: amandaramos@usp.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil); Rodrigues, Flávio Thihara, E-mail: flaviot@ymail.com [Instituto Federal de Góias (IFG), Inhumas, GO (Brazil); Alencar, Severino Matias de, E-mail: smalencar@usp.br [Escola Superior de Agricultura Luiz de Queiroz (ESALQ/USP), Piracicaba, SP (Brazil)

    2017-07-01

    Edible flowers are increasingly being used in gastronomy, being also recognized for their potential valuable effects beneficial to human health. Viola tricolor L. (johnny-jump-up) flowers represents one of the most popular and are widely used in culinary preparations, being also acknowledged for their antioxidant properties. To improve the conservation and safety of flowers the new approaches can be used as ionizing radiation. Radiation treatment contribute to the improve the safety, quality and extends the shelf life of foods by disinfestation insects and reducing or eliminating pathogenic microorganisms. The purpose of this study was to evaluate the dose-dependent effects of electron beam and gamma irradiation in the doses of 0.5, 0.8, 1.0 kGy and control (non-irradiated) on the antioxidant activity of Viola tricolor L.by the Oxygen Radical Absorbance Capacity assay (ORAC). Therefore, the ionizing radiation did not affect the antioxidant activity of the flowers. (author)

  17. Analysis on antioxidant activity by orac method in Viola tricolor l. flowers processed by ionizing radiation

    International Nuclear Information System (INIS)

    Koike, Amanda Cristina Ramos; Silva, Pamela Galo da; Villavicencio, Anna Lucia Casanas Haasis; Rodrigues, Flávio Thihara; Alencar, Severino Matias de

    2017-01-01

    Edible flowers are increasingly being used in gastronomy, being also recognized for their potential valuable effects beneficial to human health. Viola tricolor L. (johnny-jump-up) flowers represents one of the most popular and are widely used in culinary preparations, being also acknowledged for their antioxidant properties. To improve the conservation and safety of flowers the new approaches can be used as ionizing radiation. Radiation treatment contribute to the improve the safety, quality and extends the shelf life of foods by disinfestation insects and reducing or eliminating pathogenic microorganisms. The purpose of this study was to evaluate the dose-dependent effects of electron beam and gamma irradiation in the doses of 0.5, 0.8, 1.0 kGy and control (non-irradiated) on the antioxidant activity of Viola tricolor L.by the Oxygen Radical Absorbance Capacity assay (ORAC). Therefore, the ionizing radiation did not affect the antioxidant activity of the flowers. (author)

  18. Flower-like SnO2/graphene composite for high-capacity lithium storage

    International Nuclear Information System (INIS)

    Liu Hongdong; Huang Jiamu; Li Xinlu; Liu Jia; Zhang Yuxin; Du Kun

    2012-01-01

    Flower-like SnO 2 /graphene composite is synthesized by a simple hydrothermal method for high-capacity lithium storage. The as-prepared products are characterized by XRD, FTIR, FESEM, TGA and Nitrogen adsorption/desorption. The electrochemical performance of the flower-like SnO 2 /graphene composite is measured by cyclic voltammetry and galvanostatic charge/discharge cycling. The results show that the flower-like SnO 2 nanorod clusters are 800 nm in size and homogeneously adhere on graphene sheets. The flower-like SnO 2 /graphene composite displays superior Li-battery performance with large reversible capacity, excellent cyclic performance and good rate capability.

  19. Advanced cutting techniques: laser and fissuration cutting

    International Nuclear Information System (INIS)

    Migliorati, B.; Gay, P.

    1984-01-01

    Experimental tests have been performed using CO 2 laser with output power 1 to 15 kW to evaluate the effect of varying the following parameters: material (carbon steel Fe 42 C, stainless steel AISI 304, concrete), laser power, beam characteristics, work piece velocity, gas type and distribution on the laser interaction zone. In the case of concrete, drilling depths of 80 mm were obtained in a few seconds using a 10 kW laser beam. Moreover pieces of 160 mm were cut at 0.01 meters per minute. Results with carbon steel indicated maximum thicknesses of 110 mm, cut at 0.01 meters per minute with 10 kW, depths about 20% lower were obtained with the AISI 304 stainless steel. A parallel investigation was aimed at characterizing particulate emission during the laser cutting process. At the end of the research it was possible to elaborate a preliminary proposal concerning a laser based dismantling system for the application to a typical Nuclear Power Station. (author)

  20. Flower-like Ag/AgCl microcrystals: Synthesis and photocatalytic activity

    International Nuclear Information System (INIS)

    Daupor, Hasan; Wongnawa, Sumpun

    2015-01-01

    Silver/silver chloride (Ag/AgCl) composites with a novel flower-like morphology were prepared via a hot precipitation assisted by the vinyl acetate monomer (VAM) route. An aqueous solution of AlCl 3 was mixed with the vinyl acetate monomer and acetic acid before adding a AgNO 3 solution at a temperature of 100 °C. The octapod shaped flower-like Ag/AgCl particles (or “flower-like Ag/AgCl” hereinafter) has eight petals each of which was about 7–11 μm in length. The flower-like octapods were formed by preferential overgrowth along the <111> directions of the cubic seeds. Detailed studies of the growth process at different AlCl 3 concentrations revealed that the concave cube developed into a Rubik's cube where eight corners grew further into the flower-like structures. The VAM and acetic acid concentration strongly affected the growth of the Ag/AgCl to the flower-like structure and their optimum concentrations were determined. The morphologies of these particles were carefully examined by scanning electron microscopy (SEM). The crystal structures and orientation relationship were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and UV–visible diffused reflectance spectroscopy (DRS). The flower-like Ag/AgCl microcrystals were tested for their photocatalytic degradation of orange G dye (OG) catalyzed by visible light. From comparative test runs, the flower-like Ag/AgCl exhibited better photocatalytic activity than simple and commercial Ag/AgCl particles. - Highlights: • Interesting transformation of microcrystals Ag/AgCl from concave cube via Rubik's cube to flower-like shape. • The first to use VAM as morphology control reagent. • High photocatalytic activity under visible light irradiation

  1. Laser Cutting, Development Trends

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    1999-01-01

    In this paper a short review of the development trends in laser cutting will be given.The technology, which is the fastest expanding industrial production technology will develop in both its core market segment: Flat bed cutting of sheet metal, as it will expand in heavy industry and in cutting...... of 3-dimensional shapes.The CO2-laser will also in the near future be the dominating laser source in the market, although the new developments in ND-YAG-lasers opens for new possibilities for this laser type....

  2. Vesicles between plasma membrane and cell wall prior to visible senescence of Iris and Dendrobium flowers.

    Science.gov (United States)

    Kamdee, Channatika; Kirasak, Kanjana; Ketsa, Saichol; van Doorn, Wouter G

    2015-09-01

    Cut Iris flowers (Iris x hollandica, cv. Blue Magic) show visible senescence about two days after full opening. Epidermal cells of the outer tepals collapse due to programmed cell death (PCD). Transmission electron microscopy (TEM) showed irregular swelling of the cell walls, starting prior to cell collapse. Compared to cells in flowers that had just opened, wall thickness increased up to tenfold prior to cell death. Fibrils were visible in the swollen walls. After cell death very little of the cell wall remained. Prior to and during visible wall swelling, vesicles (paramural bodies) were observed between the plasma membrane and the cell walls. The vesicles were also found in groups and were accompanied by amorphous substance. They usually showed a single membrane, and had a variety of diameters and electron densities. Cut Dendrobium hybrid cv. Lucky Duan flowers exhibited visible senescence about 14 days after full flower opening. Paramural bodies were also found in Dendrobium tepal epidermis and mesophyll cells, related to wall swelling and degradation. Although alternative explanations are well possible, it is hypothesized that paramural bodies carry enzymes involved in cell wall breakdown. The literature has not yet reported such bodies in association with senescence/PCD. Copyright © 2015 Elsevier GmbH. All rights reserved.

  3. Experimental testing of exchangeable cutting inserts cutting ability

    OpenAIRE

    Čep, Robert; Janásek, Adam; Čepová, Lenka; Petrů, Jana; Hlavatý, Ivo; Car, Zlatan; Hatala, Michal

    2013-01-01

    The article deals with experimental testing of the cutting ability of exchangeable cutting inserts. Eleven types of exchangeable cutting inserts from five different manufacturers were tested. The tested cutting inserts were of the same shape and were different especially in material and coating types. The main aim was both to select a suitable test for determination of the cutting ability of exchangeable cutting inserts and to design such testing procedure that could make it possible...

  4. flowers

    African Journals Online (AJOL)

    Administrator

    2011-06-08

    Jun 8, 2011 ... the formation and asymmetrical collapse of microcavities in the vicinity of cell walls leading to the generation of microjets rupturing the cells in plant. The aim of this paper was to explore the optimum ultrasonic extraction condition of flavonoids and phenolics and provide some theoretical basis for integrative ...

  5. Investigation of cutting-induced damage in CMC bend bars

    Directory of Open Access Journals (Sweden)

    Neubrand A.

    2015-01-01

    Full Text Available Ceramic matrix composites (“CMC” with a strong fibre-matrix interface can be made damage-tolerant by introducing a highly porous matrix. Such composites typically have only a low interlaminar shear strength, which can potentially promote damage when preparing specimens or components by cutting. In order to investigate the damage induced by different cutting methods, waterjet cutting with and without abrasives, laser-cutting, wire eroding and cutoff grinding were used to cut plates of two different CMCs with a matrix porosity up to 35 vol.-%. For each combination of cutting method and composite, the flexural and interlaminar shear strength of the resulting specimens was determined. Additionally, the integrity of the regions near the cut surfaces was investigated by high-resolution x-ray computer tomography. It could be shown that the geometrical quality of the cut is strongly affected by the cutting method employed. Laser cut and waterjet cut specimens showed damage and delaminations near the cut surface leading to a reduced interlaminar shear strength of short bend bars in extreme cases.

  6. Using Cooking, Baking, and Cutting Terms. Learning Activity Pack and Instructor's Guide 5.1a. Commercial Foods and Culinary Arts Competency-Based Series. Section 5: Basic Food Preparation.

    Science.gov (United States)

    Florida State Univ., Tallahassee. Center for Studies in Vocational Education.

    This document consists of a learning activity packet (LAP) for the student and an instructor's guide for the teacher. The LAP is intended to acquaint occupational home economics students with some of the terms used in recipes. Illustrated information sheets and learning activities are provided on important cooking, baking, and cutting terms. The…

  7. Potential use of ionizing radiation as quarantine treatment for fresh fruits, vegetables and flowers in Ecuador

    International Nuclear Information System (INIS)

    Munoz, Ricardo

    1990-01-01

    It is presented a brief description of the investigations Technology. Considering the potentiality of the country, to export non traditional and exotic fresh fruits, fresh vegetables, and ornamental fresh cut flowers, studies ares initiated to use ionizing radiation as quarantine treatments. This paper reports the initial data obtained with two species of fruit fly of high incidence in the fruit producer zones of Ecuador, whose stable and permanent microclimates allow to produce a sort of fruits along all year

  8. Cut without Killing.

    Science.gov (United States)

    Black, Susan

    1991-01-01

    The zero-based curriculum model can help school boards and administrators make decisions about what to keep and what to cut. All instructional programs are ranked and judged in categories ranging from required to optional. (MLF)

  9. Short-cut math

    CERN Document Server

    Kelly, Gerard W

    1984-01-01

    Clear, concise compendium of about 150 time-saving math short-cuts features faster, easier ways to add, subtract, multiply, and divide. Each problem includes an explanation of the method. No special math ability needed.

  10. Benefits of explosive cutting for nuclear-facility applications

    International Nuclear Information System (INIS)

    Hazelton, R.F.; Lundgren, R.A.; Allen, R.P.

    1981-06-01

    The study discussed in this report was a cost/benefit analysis to determine: (1) whether explosive cutting is cost effective in comparison with alternative metal sectioning methods and (2) whether explosive cutting would reduce radiation exposure or provide other benefits. Two separate approaches were pursued. The first was to qualitatively assess cutting methods and factors involved in typical sectioning cases and then compare the results for the cutting methods. The second was to prepare estimates of work schedules and potential radiation exposures for candidate sectioning methods for two hypothetical, but typical, sectioning tasks. The analysis shows that explosive cutting would be cost effective and would also reduce radiation exposure when used for typical nuclear facility sectioning tasks. These results indicate that explosive cutting should be one of the principal cutting methods considered whenever steel or similar metal structures or equipment in a nuclear facility are to be sectioned for repair or decommissioning. 13 figures, 7 tables

  11. Effects of planting date and plant density on crop growth of cut chrysanthemum

    NARCIS (Netherlands)

    Lee, J.H.; Heuvelink, E.; Challa, H.

    2002-01-01

    The effects of planting date (season) and plant density (32, 48 or 64 plants m-2) on growth of cut chrysanthemum (Chrysanthemum (Indicum group)) were investigated in six greenhouse experiments, applying the expolinear growth equation. Final plant fresh and dry mass and number of flowers per plant

  12. Laser cutting system

    Science.gov (United States)

    Dougherty, Thomas J

    2015-03-03

    A workpiece cutting apparatus includes a laser source, a first suction system, and a first finger configured to guide a workpiece as it moves past the laser source. The first finger includes a first end provided adjacent a point where a laser from the laser source cuts the workpiece, and the first end of the first finger includes an aperture in fluid communication with the first suction system.

  13. How Can I Stop Cutting?

    Science.gov (United States)

    ... Educators Search English Español How Can I Stop Cutting? KidsHealth / For Teens / How Can I Stop Cutting? ... in a soft, cozy blanket Substitutes for the Cutting Sensation You'll notice that all the tips ...

  14. Cutting and Self-Harm

    Science.gov (United States)

    ... Your feelings Feeling sad Cutting and self-harm Cutting and self-harm Self-harm, sometimes called self- ... There are many types of self-injury, and cutting is one type that you may have heard ...

  15. Comparative Genomic Analysis of Soybean Flowering Genes

    Science.gov (United States)

    Jung, Chol-Hee; Wong, Chui E.; Singh, Mohan B.; Bhalla, Prem L.

    2012-01-01

    Flowering is an important agronomic trait that determines crop yield. Soybean is a major oilseed legume crop used for human and animal feed. Legumes have unique vegetative and floral complexities. Our understanding of the molecular basis of flower initiation and development in legumes is limited. Here, we address this by using a computational approach to examine flowering regulatory genes in the soybean genome in comparison to the most studied model plant, Arabidopsis. For this comparison, a genome-wide analysis of orthologue groups was performed, followed by an in silico gene expression analysis of the identified soybean flowering genes. Phylogenetic analyses of the gene families highlighted the evolutionary relationships among these candidates. Our study identified key flowering genes in soybean and indicates that the vernalisation and the ambient-temperature pathways seem to be the most variant in soybean. A comparison of the orthologue groups containing flowering genes indicated that, on average, each Arabidopsis flowering gene has 2-3 orthologous copies in soybean. Our analysis highlighted that the CDF3, VRN1, SVP, AP3 and PIF3 genes are paralogue-rich genes in soybean. Furthermore, the genome mapping of the soybean flowering genes showed that these genes are scattered randomly across the genome. A paralogue comparison indicated that the soybean genes comprising the largest orthologue group are clustered in a 1.4 Mb region on chromosome 16 of soybean. Furthermore, a comparison with the undomesticated soybean (Glycine soja) revealed that there are hundreds of SNPs that are associated with putative soybean flowering genes and that there are structural variants that may affect the genes of the light-signalling and ambient-temperature pathways in soybean. Our study provides a framework for the soybean flowering pathway and insights into the relationship and evolution of flowering genes between a short-day soybean and the long-day plant, Arabidopsis. PMID:22679494

  16. Flux cutting in superconductors

    International Nuclear Information System (INIS)

    Campbell, A M

    2011-01-01

    This paper describes experiments and theories of flux cutting in superconductors. The use of the flux line picture in free space is discussed. In superconductors cutting can either be by means of flux at an angle to other layers of flux, as in longitudinal current experiments, or due to shearing of the vortex lattice as in grain boundaries in YBCO. Experiments on longitudinal currents can be interpreted in terms of flux rings penetrating axial lines. More physical models of flux cutting are discussed but all predict much larger flux cutting forces than are observed. Also, cutting is occurring at angles between vortices of about one millidegree which is hard to explain. The double critical state model and its developments are discussed in relation to experiments on crossed and rotating fields. A new experiment suggested by Clem gives more direct information. It shows that an elliptical yield surface of the critical state works well, but none of the theoretical proposals for determining the direction of E are universally applicable. It appears that, as soon as any flux flow takes place, cutting also occurs. The conclusion is that new theories are required. (perspective)

  17. Fertilization Mechanisms in Flowering Plants.

    Science.gov (United States)

    Dresselhaus, Thomas; Sprunck, Stefanie; Wessel, Gary M

    2016-02-08

    Compared with the animal kingdom, fertilization is particularly complex in flowering plants (angiosperms). Sperm cells of angiosperms have lost their motility and require transportation as a passive cargo by the pollen tube cell to the egg apparatus (egg cell and accessory synergid cells). Sperm cell release from the pollen tube occurs after intensive communication between the pollen tube cell and the receptive synergid, culminating in the lysis of both interaction partners. Following release of the two sperm cells, they interact and fuse with two dimorphic female gametes (the egg and the central cell) forming the major seed components embryo and endosperm, respectively. This process is known as double fertilization. Here, we review the current understanding of the processes of sperm cell reception, gamete interaction, their pre-fertilization activation and fusion, as well as the mechanisms plants use to prevent the fusion of egg cells with multiple sperm cells. The role of Ca(2+) is highlighted in these various processes and comparisons are drawn between fertilization mechanisms in flowering plants and other eukaryotes, including mammals. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. On Permuting Cut with Contraction

    OpenAIRE

    Borisavljevic, Mirjana; Dosen, Kosta; Petric, Zoran

    1999-01-01

    The paper presents a cut-elimination procedure for intuitionistic propositional logic in which cut is eliminated directly, without introducing the multiple-cut rule mix, and in which pushing cut above contraction is one of the reduction steps. The presentation of this procedure is preceded by an analysis of Gentzen's mix-elimination procedure, made in the perspective of permuting cut with contraction. It is also shown that in the absence of implication, pushing cut above contraction doesn't p...

  19. rainfall and temperature effects on flowering and pollen productions ...

    African Journals Online (AJOL)

    RAINFALL AND TEMPERATURE EFFECTS ON FLOWERING AND POLLEN. PRODUCTIONS IN COCOA ... chocolate or for extracting cocoa butter. Although, all cultivated .... healthy flowers of the selected clones. These flowers were stored in ...

  20. An Environmental Approach to Positive Emotion: Flowers

    Directory of Open Access Journals (Sweden)

    Jeannette Haviland-Jones

    2005-01-01

    Full Text Available For more than 5000 years, people have cultivated flowers although there is no known reward for this costly behavior. In three different studies we show that flowers are a powerful positive emotion “inducer”. In Study 1, flowers, upon presentation to women, always elicited the Duchenne or true smile. Women who received flowers reported more positive moods 3 days later. In Study 2, a flower given to men or women in an elevator elicited more positive social behavior than other stimuli. In Study 3, flowers presented to elderly participants (55+ age elicited positive mood reports and improved episodic memory. Flowers have immediate and long-term effects on emotional reactions, mood, social behaviors and even memory for both males and females. There is little existing theory in any discipline that explains these findings. We suggest that cultivated flowers are rewarding because they have evolved to rapidly induce positive emotion in humans, just as other plants have evolved to induce varying behavioral responses in a wide variety of species leading to the dispersal or propagation of the plants.

  1. Flower pigment analysis of Melastoma malabathricum | Janna ...

    African Journals Online (AJOL)

    The objective of this study is to analyse the colour pigment, anthocyanin, that can be detected in flower and their stability in extracted form. All the analysed results will be used in the next study for the production of new food colouring material. From the observation, it shows that S3 flower developmental stage contains the ...

  2. A new method for promoting lily flowering

    African Journals Online (AJOL)

    Jane

    2011-08-08

    Aug 8, 2011 ... FT is thought to be the florigen in plants. In this research, a new method for promoting lily flowering was introduced. The function of FT gene cloned from Arabidopsis on promoting lily flowering was analyzed. pET-30a-FT vector was constructed to indicate the expression of FT:eGFP fuse protein in.

  3. Symbolic Dynamics, Flower Automata and Infinite Traces

    Science.gov (United States)

    Foryś, Wit; Oprocha, Piotr; Bakalarski, Slawomir

    Considering a finite alphabet as a set of allowed instructions, we can identify finite words with basic actions or programs. Hence infinite paths on a flower automaton can represent order in which these programs are executed and a flower shift related with it represents list of instructions to be executed at some mid-point of the computation.

  4. Genetic control of flowering time in legumes

    Directory of Open Access Journals (Sweden)

    James L Weller

    2015-04-01

    Full Text Available The timing of flowering, and in particular the degree to which it is responsive to the environment, is a key factor in the adaptation of a given species to various eco-geographic locations and agricultural practices. Flowering time variation has been documented in many crop legumes, and selection for specific variants has permitted significant expansion and improvement in cultivation, from prehistoric times to the present day. Recent advances in legume genomics have accelerated the process of gene identification and functional analysis, and opened up new prospects for a molecular understanding of flowering time adaptation in this important crop group. Within the legumes, two species have been prominent in flowering time studies; the vernalization-responsive long-day species pea (Pisum sativum and the warm-season short-day plant soybean (Glycine max. Analysis of flowering in these species is now being complemented by reverse genetics capabilities in the model legumes Medicago truncatula and Lotus japonicus, and the emergence of genome-scale resources in a range of other legumes. This review will outline the insights gained from detailed forward genetic analysis of flowering time in pea and soybean, highlighting the importance of light perception, the circadian clock and the FT family of flowering integrators. It discusses the current state of knowledge on genetic mechanisms for photoperiod and vernalization response, and concludes with a broader discussion of flowering time adaptation across legumes generally.

  5. Influence of gamma irradiation, cold storage and pulsing on post harvest life and respiration rate of 'golden gate' cut roses

    International Nuclear Information System (INIS)

    Palanikumar, S.; Vinod Kumar; Bhattacharjee, S.K.; Pal, Madan

    2003-01-01

    Gamma irradiation at 0.025 kGy increased the respiration rate of 'Golden Gate' cut roses. The irradiation followed by cold storage (at 4 deg C) brought down the respiration rate after storage duration of 3 days. The respiration rate was found maximum in the sucrose (3% ) pulsed flowers immediately after pulsing. However, the rate of respiration is decreased in all the treatments. The irradiated flowers recorded lowest amount of respiration at senescence and the vase life was maximum in these flowers. (author)

  6. In vitro flowering ofDendrobium candidum.

    Science.gov (United States)

    Wang, G; Xu, Z; Chia, T F; Chua, N H

    1997-02-01

    Dendrobium candidum, a wild orchid species from China, normally requires three to four years of cultivation before it can produce flowers. The effects of plant hormones and polyamines on flower initiation of this species in tissue culture were investigated. The addition of spermidine, or BA, or the combination of NAA and BA to the culture medium can induce protocorms or shoots to flower within three to six months with a frequency of 31.6%-45.8%. The flowering frequency can be further increased to 82.8 % on the average by pre-treatment of protocorms in an ABA-containing medium followed by transfer onto MS medium with BA. The induction of precocious flowering depends on the developmental stage of the experimental materials (protocorms, shoots and plantlets) used, and usually occurs only when mt formation is inhibited.

  7. The Variation of Oncidium Rosy Sunset Flower Volatiles with Daily Rhythm, Flowering Period, and Flower Parts

    Directory of Open Access Journals (Sweden)

    Yi-Tien Chiu

    2017-09-01

    Full Text Available Oncidium is an important ornamental crop worldwide, and in recent years, the characteristics of the flower aroma have become a concern for breeders. This study used headspace solid-phase microextraction (HS-SPME and gas chromatography/mass spectrometry (GC-MS analysis of the volatile compounds to study the aroma characteristics of Onc. Rosy Sunset. A total of 45 compounds were identified, with the major compound being linalool. Onc. Rosy Sunset had the highest odor concentration from 10:00 to 12:00 and lowest from 20:00 to 24:00. The inflorescence emitted the highest quantities of volatile compounds during stages 3–6, which then decreased with the aging of the flowers. In Onc. Rosy Sunset, the sepals and petals were the major parts for the floral fragrance emission, in which linalool content was the highest, whereas the lip and column had a different composition of major volatile compounds, of which benzaldehyde, β-myrcene, and β-caryophyllene dominated.

  8. Improved cutting performance in high power laser cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    2003-01-01

    Recent results in high power laser cutting especially with focus on cutting of mild grade steel types for shipbuilding are described.......Recent results in high power laser cutting especially with focus on cutting of mild grade steel types for shipbuilding are described....

  9. Determination of cut front position in laser cutting

    International Nuclear Information System (INIS)

    Pereira, M; Thombansen, U

    2016-01-01

    Laser cutting has a huge importance to manufacturing industry. Laser cutting machines operate with fixed technological parameters and this does not guarantee the best productivity. The adjustment of the cutting parameters during operation can improve the machine performance. Based on a coaxial measuring device it is possible to identify the cut front position during the cutting process. This paper describes the data analysis approach used to determine the cut front position for different feed rates. The cut front position was determined with good resolution, but improvements are needed to make the whole process more stable. (paper)

  10. Determination of cut front position in laser cutting

    Science.gov (United States)

    Pereira, M.; Thombansen, U.

    2016-07-01

    Laser cutting has a huge importance to manufacturing industry. Laser cutting machines operate with fixed technological parameters and this does not guarantee the best productivity. The adjustment of the cutting parameters during operation can improve the machine performance. Based on a coaxial measuring device it is possible to identify the cut front position during the cutting process. This paper describes the data analysis approach used to determine the cut front position for different feed rates. The cut front position was determined with good resolution, but improvements are needed to make the whole process more stable.

  11. Template-free sonochemical synthesis of flower-like ZnO nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Huawa [State Key Laboratory of Solidification Processing, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi' an 710072 (China); School of Science, Xi' an Polytechnic University, Xi' an 710048 (China); Fan, Huiqing, E-mail: hqfan3@163.com [State Key Laboratory of Solidification Processing, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi' an 710072 (China); Wang, Xin [Shaanxi Province Thin Film Technology and Optical Test Open Key Laboratory, School of Photoelectrical Engineering, Xi' an Technological University, Xi' an 710032 (China); Wang, Jing [State Key Laboratory of Solidification Processing, School of Materials Science and Engineering, Northwestern Polytechnical University, Xi' an 710072 (China); Cheng, Pengfei; Zhang, Xiaojun [School of Science, Xi' an Polytechnic University, Xi' an 710048 (China)

    2014-10-03

    Flower-like ZnO nanostructures have been successfully synthesized via a facile and template-free sonochemical method, using zinc acetate and potassium hydroxide as reactants only. The as-synthesized flower-like ZnO nanostructures were composed of nanorods with the width of ∼300–400 nm and the length of ∼2–3 μm. The structures, morphologies and optical properties of the as-prepared products were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscopy, UV-Vis spectrophotometry and Raman-scattering spectroscopy. A plausible formation mechanism of flower-like ZnO nanostructures was studied by SEM which monitors an intermediate morphology transformation of the product at the different ultrasonic time (t=80,90,95,105, and 120 min). - Highlights: • A facile and template-free sonochemical method to fabricate flower-like ZnO nanostructures was proposed. • The flower-like ZnO nanostructures follow the ingrowth of ZnO from the matrix of Zn(OH){sub 2} crystals. • The flower-like ZnO nanostructures are also expected to explore their application in the field of nano-electronic devices.

  12. Template-free sonochemical synthesis of flower-like ZnO nanostructures

    International Nuclear Information System (INIS)

    Yu, Huawa; Fan, Huiqing; Wang, Xin; Wang, Jing; Cheng, Pengfei; Zhang, Xiaojun

    2014-01-01

    Flower-like ZnO nanostructures have been successfully synthesized via a facile and template-free sonochemical method, using zinc acetate and potassium hydroxide as reactants only. The as-synthesized flower-like ZnO nanostructures were composed of nanorods with the width of ∼300–400 nm and the length of ∼2–3 μm. The structures, morphologies and optical properties of the as-prepared products were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscopy, UV-Vis spectrophotometry and Raman-scattering spectroscopy. A plausible formation mechanism of flower-like ZnO nanostructures was studied by SEM which monitors an intermediate morphology transformation of the product at the different ultrasonic time (t=80,90,95,105, and 120 min). - Highlights: • A facile and template-free sonochemical method to fabricate flower-like ZnO nanostructures was proposed. • The flower-like ZnO nanostructures follow the ingrowth of ZnO from the matrix of Zn(OH) 2 crystals. • The flower-like ZnO nanostructures are also expected to explore their application in the field of nano-electronic devices

  13. The negotiation of fair trade standards within Ecuadorian flower plantations

    Directory of Open Access Journals (Sweden)

    Angus Lyall

    2014-03-01

    Full Text Available Fairtrade International (FLO applies requirements or “standards” for certification in agroindustries in order to channel resources to workers, improve their conditions, and “empower” them, even requiring freedom of association. Researchers have signaled a “dilution” (Jaffee, 2012 of standards in recent years. I take into account the case of the Ecuadorian cut-flower industry to show that FLO’s impacts on power relations ought to be analyzed not in terms of the standards, but rather in terms of the local negotiation of standards within territorial power relations. For this case, I point out that before FLO’s criticisms of conventional market mechanisms, standards generate better conditions, but also facilitate the re-consolidation of labor control.   

  14. Laser beam machining of polycrystalline diamond for cutting tool manufacturing

    Science.gov (United States)

    Wyszyński, Dominik; Ostrowski, Robert; Zwolak, Marek; Bryk, Witold

    2017-10-01

    The paper concerns application of DPSS Nd: YAG 532nm pulse laser source for machining of polycrystalline WC based diamond inserts (PCD). The goal of the research was to determine optimal laser cutting parameters for cutting tool shaping. Basic criteria to reach the goal was cutting edge quality (minimalization of finishing operations), material removal rate (time and cost efficiency), choice of laser beam characteristics (polarization, power, focused beam diameter). The research was planned and realised and analysed according to design of experiment rules (DOE). The analysis of the cutting edge was prepared with use of Alicona Infinite Focus measurement system.

  15. Underwater plasma arc cutting

    International Nuclear Information System (INIS)

    Leautier, R.; Pilot, G.

    1991-01-01

    This report describes the work done to develop underwater plasma arc cutting techniques, to characterise aerosols from cutting operations on radioactive and non-radioactive work-pieces, and to develop suitable ventilation and filtration techniques. The work has been carried out in the framework of a contract between CEA-CEN Cadarache and the Commission of European Communities. Furthermore, this work has been carried out in close cooperation with CEA-CEN Saclay mainly for secondary emissions and radioactive analysis. The contract started in May 1986 and was completed in December 1988 by a supplementary agreement. This report has been compiled from several progress reports submitted during the work period, contains the main findings of the work and encloses the results of comparative tests on plasma arc cutting

  16. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira; Lei Zhou

    2000-01-30

    This is the second quarterly progress report for Year 2 of the ACTS project. It includes a review of progress made in Flow Loop development and research during the period of time between Oct 1, 2000 and December 31, 2000. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 2: Addition of a foam generation and breaker system), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 7): ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (d) Research project (Task 8): ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (e) Research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (g) Research on instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), and Foam properties while transporting cuttings. (Task 12), (h) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (i) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members. The tasks Completed During This Quarter are Task 7 and Task 8.

  17. Theoretical Models for Orthogonal Cutting

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo

    This review of simple models for orthogonal cutting was extracted from: “L. De Chiffre: Metal Cutting Mechanics and Applications, D.Sc. Thesis, Technical University of Denmark, 1990.”......This review of simple models for orthogonal cutting was extracted from: “L. De Chiffre: Metal Cutting Mechanics and Applications, D.Sc. Thesis, Technical University of Denmark, 1990.”...

  18. Effects of Cutting Edge Microgeometry on Residual Stress in Orthogonal Cutting of Inconel 718 by FEM.

    Science.gov (United States)

    Shen, Qi; Liu, Zhanqiang; Hua, Yang; Zhao, Jinfu; Lv, Woyun; Mohsan, Aziz Ul Hassan

    2018-06-14

    Service performance of components such as fatigue life are dramatically influenced by the machined surface and subsurface residual stresses. This paper aims at achieving a better understanding of the influence of cutting edge microgeometry on machined surface residual stresses during orthogonal dry cutting of Inconel 718. Numerical and experimental investigations have been conducted in this research. The cutting edge microgeometry factors of average cutting edge radius S¯, form-factor K , and chamfer were investigated. An increasing trend for the magnitudes of both tensile and compressive residual stresses was observed by using larger S¯ or introducing a chamfer on the cutting edges. The ploughing depth has been predicted based on the stagnation zone. The increase of ploughing depth means that more material was ironed on the workpiece subsurface, which resulted in an increase in the compressive residual stress. The thermal loads were leading factors that affected the surface tensile residual stress. For the unsymmetrical honed cutting edge with K = 2, the friction between tool and workpiece and tensile residual stress tended to be high, while for the unsymmetrical honed cutting edge with K = 0.5, the high ploughing depth led to a higher compressive residual stress. This paper provides guidance for regulating machine-induced residual stress by edge preparation.

  19. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Stefan Miska; Troy Reed; Ergun Kuru

    2004-09-30

    The Advanced Cuttings Transport Study (ACTS) was a 5-year JIP project undertaken at the University of Tulsa (TU). The project was sponsored by the U.S. Department of Energy (DOE) and JIP member companies. The objectives of the project were: (1) to develop and construct a new research facility that would allow three-phase (gas, liquid and cuttings) flow experiments under ambient and EPET (elevated pressure and temperature) conditions, and at different angle of inclinations and drill pipe rotation speeds; (2) to conduct experiments and develop a data base for the industry and academia; and (3) to develop mechanistic models for optimization of drilling hydraulics and cuttings transport. This project consisted of research studies, flow loop construction and instrumentation development. Following a one-year period for basic flow loop construction, a proposal was submitted by TU to the DOE for a five-year project that was organized in such a manner as to provide a logical progression of research experiments as well as additions to the basic flow loop. The flow loop additions and improvements included: (1) elevated temperature capability; (2) two-phase (gas and liquid, foam etc.) capability; (3) cuttings injection and removal system; (4) drill pipe rotation system; and (5) drilling section elevation system. In parallel with the flow loop construction, hydraulics and cuttings transport studies were preformed using drilling foams and aerated muds. In addition, hydraulics and rheology of synthetic drilling fluids were investigated. The studies were performed under ambient and EPET conditions. The effects of temperature and pressure on the hydraulics and cuttings transport were investigated. Mechanistic models were developed to predict frictional pressure loss and cuttings transport in horizontal and near-horizontal configurations. Model predictions were compared with the measured data. Predominantly, model predictions show satisfactory agreements with the measured data. As a

  20. Synthesis, characterization and magnetic property of 3D flower-like ...

    Indian Academy of Sciences (India)

    Three-dimensional (3D) flower-like cubic Ni3S4 nanoplates with single crystalline nature were successfully prepared through decomposing bis(thiourea) nickel(II) chloride crystals (BTNC). The samples were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope, selected area ...

  1. Flowering schedule in a perennial plant

    DEFF Research Database (Denmark)

    Ehrlén, Johan; Raabova, Jana; Dahlgren, Johan

    2015-01-01

    Optimal timing of reproduction within a season may be influenced by several abiotic and biotic factors. These factors sometimes affect different components of fitness, making assessments of net selection difficult. We used estimates of offspring fitness to examine how pre-dispersal seed predation...... from early flowers. Reproductive values of early and late flowers balanced at a predation intensity of 63%. Across 15 natural populations, the strength of selection for allocation to late flowers was positively correlated with mean seed predation intensity. Our results suggest that the optimal shape...

  2. Skin Cut Construction

    DEFF Research Database (Denmark)

    2017-01-01

    of the exhibition is to create a connection between the artistic and technological development through Danish rms and researchers who represent the newest technology in concrete treatment. The rst part exhibition (skin) will focus on the surface treatment of concrete (’graphical concrete’), the second (cut...

  3. Cutting Cakes Carefully

    Science.gov (United States)

    Hill, Theodore P.; Morrison, Kent E.

    2010-01-01

    This paper surveys the fascinating mathematics of fair division, and provides a suite of examples using basic ideas from algebra, calculus, and probability which can be used to examine and test new and sometimes complex mathematical theories and claims involving fair division. Conversely, the classical cut-and-choose and moving-knife algorithms…

  4. Classroom Cut Ups

    Science.gov (United States)

    Lord, Stacy

    2011-01-01

    Discovering identity can be a lifelong challenge for some people, while others seem to figure it out right away. During the middle school years, finding one's identity can be a daunting task. Most students will spend a considerable amount of time during these middle years looking for it. This lesson on cut-paper self-portraits lets students delve…

  5. Abrasive water jet cutting

    International Nuclear Information System (INIS)

    Leist, K.J.; Funnell, G.J.

    1988-01-01

    In the process of selecting a failed equipment cut-up tool for the process facility modifications (PFM) project, a system using an abrasive water jet (AWJ) was developed and tested for remote disassembly of failed equipment. It is presented in this paper

  6. After the Ribbon Cutting

    DEFF Research Database (Denmark)

    Hodge, Graeme A.; Boulot, Emille; Duffield, Colin

    2017-01-01

    Much attention has gone towards ‘up-front’ processes when delivering infrastructure public–private partnerships (PPPs), but less on how to best govern after the ribbon is cut and the infrastructure built. This paper identifies the primary contractual and institutional governance challenges arising...

  7. Simultaneous Cake Cutting

    DEFF Research Database (Denmark)

    Balkanski, Eric; Branzei, Simina; Kurokawa, David

    2014-01-01

    We introduce the simultaneous model for cake cutting (the fair allocation of a divisible good), in which agents simultaneously send messages containing a sketch of their preferences over the cake. We show that this model enables the computation of divisions that satisfy proportionality — a popular...

  8. Increasing Hermaphrodite Flowers using Plant Growth Regulators in Andromonoecious Jatropha curcas

    Directory of Open Access Journals (Sweden)

    DASUMIATI

    2014-09-01

    Full Text Available Jatropha curcas (JC is a crop with potential for use in biodiesel. Production of biodiesel requires plant seed as raw material, so the viability of JC for use in biodiesel will dependent greatly on the plant's production of flowers. Generally, this plant is monoecious, meaning it has both male and female flowers. However, very rarely JC plants may be andromonoecious. Andromonoecious specimens of JC produce hermaphrodite and male flowers in the same plant. The number of hermaphrodite flowers per inflorescence is generally low compared to the number of male flowers. The aim of this study was to increase the proportion of hermaphrodite flowers by using plant growth regulators (PGRs in andromonoecious JC. Our experiment was conducted in Randomized Block Design (RBD with 9 treatments, namely kinetin, GA3, and IAA with concentrations of 0 ppm as a control, 50 and 100 ppm of each PGRs. The treatments were applied to stem cuttings from each plant and repeated 4 times. PGRs were applied by spraying the leaves within the buds of each plant. Applications took place weekly beginning when the plants entered flower initiating phase, until inflorescence produced. Observations were conducted during the treatment period (10 weeks. Results showed that plants treated with IAA, GA3, and kinetin at 50 and 100 ppm produced increased inflorescence per plant. The increases measured were 155.4 and 92.9% of (IAA, 120.4 and 151% (GA3, 96.6 and 51.7% (kinetin respectively. In addition, we found that application and GA3 at concentrations of 50 and 100 ppm, and kinetin at 50 ppm, increased the number of hermaphrodite flowers per inflorescence by 50%, and increased the number of hermaphrodite flowers per plant by 275.6 and 183.1% (IAA, 219.5 and 254.1% (GA3, 162.9 and 103.1% (kinetin respectively. As would be expected, the number of fruit per plant increased in those specimens treated with IAA, GA3, and kinetin at 50 and 100 ppm. The increases measured were 301.7 and 167

  9. Flowering, nectar production and insects visits in two cultivars of Cucurbita maxima Duch. flowers

    Directory of Open Access Journals (Sweden)

    Marta Dmitruk

    2012-12-01

    Full Text Available The study was conducted on experimental plots in the conditions of Lublin. In the years 1998-2000 flowering, nectar secretion and insect visitation of male and female flowers of two winter squash (Cucurbita maxima Duch. cultivars: 'Ambar' and 'Amazonka', were studied. The plants flowered from July to October. The flower life span was within the range of 7-10 hours. Female flowers of cv. Ambar were marked by the most abundant nectar secretion (129 mg. The nectar sugar content can be estimated as average (25%-35%. Winter squash nectar contained 84% of sucrose as well as 8-9% of fructose and 7%-8% of glucose. Flowers of the studied taxa were frequently foraged by the honey bee (66%-98% of total insects and bumblebees (1%-30%.

  10. Experimental study of the process of cutting of sugarcane bagasse

    International Nuclear Information System (INIS)

    Arzolaa, Nelson; Garcia, Joyner

    2015-01-01

    Biomass densification has encouraged significant interest around the world as a technique for utilization of agro and forest residues as an energy source, and pellets/briquettes production has grown rapidly in last few years. The cutting process is one of the most important steps for biomass preparation prior densification. This stage helps to homogenize the raw material and therefore facilitate handling, feeding and filling in the briquetting equipment. The aim of this work was to study the behavior of sugarcane bagasse submitted to cutting, as a function of its moisture content, angle of the blade edge and cutting speed. The specific cutting energy and peak cutting force were measure using an experimental facility developed for this series of experiments. An analysis of the results of the full factorial experimental design using a statistical analysis of variance (ANOVA) was performed. The response surfaces and empirical models for the specific cutting energy and peak cutting force were obtained using statistical analysis system software. Low angle of the blade edge and low moisture content are, in this order, the most important experimental factors in determining a low specific cutting energy and a low peak cutting force respectively. The best cutting conditions are achieved for an angle of blade edge of 20.8° and a moisture content of 10% w. b. The results of this work could contribute to the optimal design of sugarcane bagasse pre-treatment systems. (full text)

  11. Core Cutting Test with Vertical Rock Cutting Rig (VRCR)

    Science.gov (United States)

    Yasar, Serdar; Osman Yilmaz, Ali

    2017-12-01

    Roadheaders are frequently used machines in mining and tunnelling, and performance prediction of roadheaders is important for project economics and stability. Several methods were proposed so far for this purpose and, rock cutting tests are the best choice. Rock cutting tests are generally divided into two groups which are namely, full scale rock cutting tests and small scale rock cutting tests. These two tests have some superiorities and deficiencies over themselves. However, in many cases, where rock sampling becomes problematic, small scale rock cutting test (core cutting test) is preferred for performance prediction, since small block samples and core samples can be conducted to rock cutting testing. Common problem for rock cutting tests are that they can be found in very limited research centres. In this study, a new mobile rock cutting testing equipment, vertical rock cutting rig (VRCR) was introduced. Standard testing procedure was conducted on seven rock samples which were the part of a former study on cutting rocks with another small scale rock cutting test. Results showed that core cutting test can be realized successfully with VRCR with the validation of paired samples t-test.

  12. USING BACH FLOWER IN HOLISTIC PSYCHOTHERAPY

    Directory of Open Access Journals (Sweden)

    Vagner Ferreira do Nascimento

    2017-05-01

    Full Text Available This is a narrative review from scientific literature that aimed to describe concepts and approaches for indications of the therapeutic use of Bach flower remedies in holistic psychotherapy. The review was developed in February 2016 from books, official documents and articles indexed in Lilacs and Scielo databases. Bach flower remedies is a therapeutic method that aims to restore the balance of human being, restoring its vital energy through holistic care. Because the flower essences act on psychic and emotional dimension of individual, when employed in holistic psychotherapy can provide greater autonomy, self-care and effectiveness compared to other alternative methods. The literature indicated that flower essence therapy is a safe practice and can be used in a complementary to health care, but should be performed by qualified professionals. It has also shown to be a promising and important area for nursing professional, but it still requires greater investment in research in the area to support the practice.

  13. Phylogeny determines flower size-dependent sex allocation at flowering in a hermaphroditic family.

    Science.gov (United States)

    Teixido, A L; Guzmán, B; Staggemeier, V G; Valladares, F

    2017-11-01

    In animal-pollinated hermaphroditic plants, optimal floral allocation determines relative investment into sexes, which is ultimately dependent on flower size. Larger flowers disproportionally increase maleness whereas smaller and less rewarding flowers favour female function. Although floral traits are considered strongly conserved, phylogenetic relationships in the interspecific patterns of resource allocation to floral sex remain overlooked. We investigated these patterns in Cistaceae, a hermaphroditic family. We reconstructed phylogenetic relationships among Cistaceae species and quantified phylogenetic signal for flower size, dry mass and nutrient allocation to floral structures in 23 Mediterranean species using Blomberg's K-statistic. Lastly, phylogenetically-controlled correlational and regression analyses were applied to examine flower size-based allometry in resource allocation to floral structures. Sepals received the highest dry mass allocation, followed by petals, whereas sexual structures increased nutrient allocation. Flower size and resource allocation to floral structures, except for carpels, showed a strong phylogenetic signal. Larger-flowered species allometrically allocated more resources to maleness, by increasing allocation to corollas and stamens. Our results suggest a major role of phylogeny in determining interspecific changes in flower size and subsequent floral sex allocation. This implies that flower size balances the male-female function over the evolutionary history of Cistaceae. While allometric resource investment in maleness is inherited across species diversification, allocation to the female function seems a labile trait that varies among closely related species that have diversified into different ecological niches. © 2017 German Botanical Society and The Royal Botanical Society of the Netherlands.

  14. Facile synthesis and optical property of SnO2 flower-like architectures

    International Nuclear Information System (INIS)

    Zhao Qingrui; Li Zhengquan; Wu Changzheng; Bai Xue; Xie Yi

    2006-01-01

    Two-dimensional (2D) hierarchical tin dioxide (SnO 2 ) flower-like architectures consisting of sheet-like nanoparticles have been successfully prepared by a simply mild hydrothermal method based on the reaction between tin foil, NaOH and KBrO 3 . The photoluminescence (PL) spectrum exhibit that the flower-like architectures of SnO 2 have strong PL emission, which suggest its possible applications in nanoscaled optoelectronic devices. The formation process of SnO 2 architectures is investigated and the corresponding mechanism is also proposed

  15. Phytochrome, plant growth and flowering

    Science.gov (United States)

    King, R. W.; Bagnall, D. J.

    1994-01-01

    Attempts to use artificially lit cabinets to grow plants identical to those growing in sunlight have provided compelling evidence of the importance of light quality for plant growth. Changing the balance of red (R) to far-red (FR) radiation, but with a fixed photosynthetic input can shift the phytochrome photoequilibrium in a plant and generate large differences in plant growth. With FR enrichment the plants elongate, and may produce more leaf area and dry matter. Similar morphogenic responses are also obtained when light quality is altered only briefly (15-30 min) at the end-of-the-day. Conversely, for plants grown in natural conditions the response of plant form to selective spectral filtering has again shown that red and far-red wavebands are important as found by Kasperbauer and coworkers. Also, where photosynthetic photon flux densities (PPFD) of sunlight have been held constant, the removal of far-red alone alters plant growth. With FR depletion plants grown in sunlight are small, more branched and darker green. Here we examine the implications for plant growth and flowering when the far-red composition of incident radiation in plant growth chambers is manipulated.

  16. Phytochrome, plant growth and flowering

    Energy Technology Data Exchange (ETDEWEB)

    King, R.W.; Bagnall, D.J. [CSIRO, Canberra (Australia)

    1994-12-31

    Attempts to use artificially lit cabinets to grow plants identical to those growing in sunlight have provided compelling evidence of the importance of light quality for plant growth. Changing the balance of red (R) to far-red (FR) radiation, but with a fixed photosynthetic input can shift the phytochrome photoequilibrium in a plant and generate large differences in plant growth. With FR enrichment the plants elongate, and may produce more leaf area and dry matter. Similar morphogenic responses are also obtained when light quality is altered only briefly (15-30 min) at the end-of-the-day. Conversely, for plants grown in natural conditions the response of plant form to selective spectral filtering has again shown that red and far-red wavebands are important as found by Kasperbauer and coworkers. Also, where photosynthetic photon flux densities (PPFD) of sunlight have been held constant, the removal of far-red alone alters plant growth. As shown for chrysanthemum, with FR depletion plants grown in sunlight are small, more branched and darker green. We examine the implications for plant growth and flowering when the far-red composition of incident radiation in plant growth chambers is manipulated.

  17. Red Anthocyanins and Yellow Carotenoids Form the Color of Orange-Flower Gentian (Gentiana lutea L. var. aurantiaca)

    Science.gov (United States)

    Gómez Gómez, Lourdes; Veiga, Tania; Ni, Xiuzhen; Farré, Gemma; Capell, Teresa; Guitián, Javier; Guitián, Pablo; Sandmann, Gerhard; Christou, Paul

    2016-01-01

    Flower color is an important characteristic that determines the commercial value of ornamental plants. Gentian flowers occur in a limited range of colors because this species is not widely cultivated as a cut flower. Gentiana lutea L. var. aurantiaca (abbr, aurantiaca) is characterized by its orange flowers, but the specific pigments responsible for this coloration are unknown. We therefore investigated the carotenoid and flavonoid composition of petals during flower development in the orange-flowered gentian variety of aurantiaca and the yellow-flowered variety of G. lutea L. var. lutea (abbr, lutea). We observed minor varietal differences in the concentration of carotenoids at the early and final stages, but only aurantiaca petals accumulated pelargonidin glycosides, whereas these compounds were not found in lutea petals. We cloned and sequenced the anthocyanin biosynthetic gene fragments from petals, and analyzed the expression of these genes in the petals of both varieties to determine the molecular mechanisms responsible for the differences in petal color. Comparisons of deduced amino acid sequences encoded by the isolated anthocyanin cDNA fragments indicated that chalcone synthase (CHS), chalcone isomerase (CHI), anthocyanidin synthase 1 (ANS1) and ANS2 are identical in both aurantiaca and lutea varieties whereas minor amino acid differences of the deduced flavonone 3-hydroxylase (F3H) and dihydroflavonol 4-reductase (DFR) between both varieties were observed. The aurantiaca petals expressed substantially higher levels of transcripts representing CHS, F3H, DFR, ANS and UDP-glucose:flavonoid-3-O-glucosyltransferase genes, compared to lutea petals. Pelargonidin glycoside synthesis in aurantiaca petals therefore appears to reflect the higher steady-state levels of pelargonidin synthesis transcripts. Moreover, possible changes in the substrate specificity of DFR enzymes may represent additional mechanisms for producing red pelargonidin glycosides in petals of

  18. Red Anthocyanins and Yellow Carotenoids Form the Color of Orange-Flower Gentian (Gentiana lutea L. var. aurantiaca.

    Directory of Open Access Journals (Sweden)

    Judit Berman

    Full Text Available Flower color is an important characteristic that determines the commercial value of ornamental plants. Gentian flowers occur in a limited range of colors because this species is not widely cultivated as a cut flower. Gentiana lutea L. var. aurantiaca (abbr, aurantiaca is characterized by its orange flowers, but the specific pigments responsible for this coloration are unknown. We therefore investigated the carotenoid and flavonoid composition of petals during flower development in the orange-flowered gentian variety of aurantiaca and the yellow-flowered variety of G. lutea L. var. lutea (abbr, lutea. We observed minor varietal differences in the concentration of carotenoids at the early and final stages, but only aurantiaca petals accumulated pelargonidin glycosides, whereas these compounds were not found in lutea petals. We cloned and sequenced the anthocyanin biosynthetic gene fragments from petals, and analyzed the expression of these genes in the petals of both varieties to determine the molecular mechanisms responsible for the differences in petal color. Comparisons of deduced amino acid sequences encoded by the isolated anthocyanin cDNA fragments indicated that chalcone synthase (CHS, chalcone isomerase (CHI, anthocyanidin synthase 1 (ANS1 and ANS2 are identical in both aurantiaca and lutea varieties whereas minor amino acid differences of the deduced flavonone 3-hydroxylase (F3H and dihydroflavonol 4-reductase (DFR between both varieties were observed. The aurantiaca petals expressed substantially higher levels of transcripts representing CHS, F3H, DFR, ANS and UDP-glucose:flavonoid-3-O-glucosyltransferase genes, compared to lutea petals. Pelargonidin glycoside synthesis in aurantiaca petals therefore appears to reflect the higher steady-state levels of pelargonidin synthesis transcripts. Moreover, possible changes in the substrate specificity of DFR enzymes may represent additional mechanisms for producing red pelargonidin glycosides in

  19. Red Anthocyanins and Yellow Carotenoids Form the Color of Orange-Flower Gentian (Gentiana lutea L. var. aurantiaca).

    Science.gov (United States)

    Berman, Judit; Sheng, Yanmin; Gómez Gómez, Lourdes; Veiga, Tania; Ni, Xiuzhen; Farré, Gemma; Capell, Teresa; Guitián, Javier; Guitián, Pablo; Sandmann, Gerhard; Christou, Paul; Zhu, Changfu

    2016-01-01

    Flower color is an important characteristic that determines the commercial value of ornamental plants. Gentian flowers occur in a limited range of colors because this species is not widely cultivated as a cut flower. Gentiana lutea L. var. aurantiaca (abbr, aurantiaca) is characterized by its orange flowers, but the specific pigments responsible for this coloration are unknown. We therefore investigated the carotenoid and flavonoid composition of petals during flower development in the orange-flowered gentian variety of aurantiaca and the yellow-flowered variety of G. lutea L. var. lutea (abbr, lutea). We observed minor varietal differences in the concentration of carotenoids at the early and final stages, but only aurantiaca petals accumulated pelargonidin glycosides, whereas these compounds were not found in lutea petals. We cloned and sequenced the anthocyanin biosynthetic gene fragments from petals, and analyzed the expression of these genes in the petals of both varieties to determine the molecular mechanisms responsible for the differences in petal color. Comparisons of deduced amino acid sequences encoded by the isolated anthocyanin cDNA fragments indicated that chalcone synthase (CHS), chalcone isomerase (CHI), anthocyanidin synthase 1 (ANS1) and ANS2 are identical in both aurantiaca and lutea varieties whereas minor amino acid differences of the deduced flavonone 3-hydroxylase (F3H) and dihydroflavonol 4-reductase (DFR) between both varieties were observed. The aurantiaca petals expressed substantially higher levels of transcripts representing CHS, F3H, DFR, ANS and UDP-glucose:flavonoid-3-O-glucosyltransferase genes, compared to lutea petals. Pelargonidin glycoside synthesis in aurantiaca petals therefore appears to reflect the higher steady-state levels of pelargonidin synthesis transcripts. Moreover, possible changes in the substrate specificity of DFR enzymes may represent additional mechanisms for producing red pelargonidin glycosides in petals of

  20. Biology of flower-infecting fungi.

    Science.gov (United States)

    Ngugi, Henry K; Scherm, Harald

    2006-01-01

    The ability to infect host flowers offers important ecological benefits to plant-parasitic fungi; not surprisingly, therefore, numerous fungal species from a wide range of taxonomic groups have adopted a life style that involves flower infection. Although flower-infecting fungi are very diverse, they can be classified readily into three major groups: opportunistic, unspecialized pathogens causing necrotic symptoms such as blossom blights (group 1), and specialist flower pathogens which infect inflorescences either through the gynoecium (group 2) or systemically through the apical meristem (group 3). This three-tier system is supported by life history attributes such as host range, mode of spore transmission, degree of host sterilization as a result of infection, and whether or not the fungus undergoes an obligate sexual cycle, produces resting spores in affected inflorescences, and is r- or K-selected. Across the three groups, the flower as an infection court poses important challenges for disease management. Ecologically and evolutionarily, terms and concepts borrowed from the study of venereal (sexually transmitted) diseases of animals do not adequately capture the range of strategies employed by fungi that infect flowers.

  1. Pollination Services of Mango Flower Pollinators

    Science.gov (United States)

    Huda, A. Nurul; Salmah, M. R. Che; Hassan, A. Abu; Hamdan, A.; Razak, M. N. Abdul

    2015-01-01

    Measuring wild pollinator services in agricultural production is very important in the context of sustainable management. In this study, we estimated the contribution of native pollinators to mango fruit set production of two mango cultivars Mangifera indica (L). cv. ‘Sala’ and ‘Chok Anan’. Visitation rates of pollinators on mango flowers and number of pollen grains adhering to their bodies determined pollinator efficiency for reproductive success of the crop. Chok Anan failed to produce any fruit set in the absence of pollinators. In natural condition, we found that Sala produced 4.8% fruit set per hermaphrodite flower while Chok Anan produced 3.1% per flower. Hand pollination tremendously increased fruit set of naturally pollinated flower for Sala (>100%), but only 33% for Chok Anan. Pollinator contribution to mango fruit set was estimated at 53% of total fruit set production. Our results highlighted the importance of insect pollinations in mango production. Large size flies Eristalinus spp. and Chrysomya spp. were found to be effective pollen carriers and visited more mango flowers compared with other flower visitors. PMID:26246439

  2. Some possibilities for determining cutting data when using laser cutting:

    OpenAIRE

    Radovanović, Miroslav

    2006-01-01

    The technological problems faced in the field of the application of laser-cutting machines lie in insufficient knowledge of the laser technique and the absence of both sufficiently reliable practical data and knowledge about the parameters affecting the work process itself. A significant parameter that is necessary to determine and to enter in an NC-program is the cutting speed. Various authors analyze the laser-cutting process and give mathematical models where laser cutting is modeled by us...

  3. Cutting to the chase

    International Nuclear Information System (INIS)

    Snieckus, D.

    2001-01-01

    This article reports on the development of the cost effective abrasive cutting Sabre system which came as a result of UWG's work on the decommissioning of the Phillips' Maureen wells and adds to UWG's 'total severance solution' tools. The advantages of the system are highlighted and include the ability to operate from a platform or diving support vessel, to cut internal cases, and to eliminate the use of environmentally damaging explosives and the need to operate from a rig. The new Mark II version of the Sabre designed to work at greater depths of water, the range of the severance tools, UWG's well abandonment hole assembly system, and its aim to enter the Gulf of Mexico market are discussed. Details are given of the decommissioning of the Schwedeneck-See platforms in Kiel Bay off Germany and the Phillips' UK decommissioning plans for the Maureen platform

  4. EFFECTS OF TYPES OF MEDIA AND NPK FERTILIZER ON THE ROOTING CAPACITY OF CHRYSANTHEMUM CUTTINGS

    Directory of Open Access Journals (Sweden)

    K. Budiarto

    2016-10-01

    Full Text Available Physiological status of chrysanthemum cuttings during rooting process highly influences plant growth and flower production. Amongst other aspects, rooting capacity of the cuttings is the most important. Rooting capacity is influenced by environmental conditions such as growing medium and nutrition. The study was aimed to analyze the effects of different types of media, fertilizer concentration, and frequency of fertilizer application on the rooting capacity of chrysanthemum cuttings. The experiment was conducted at the Segunung Experimental Station of the Indonesian Ornamental Crops Research Institute from February to May 2005. The treatments consisted of four different rooting media, i.e. carbonized rice husk, coco peat, perlite, and mixture of perlite and vermiculite (1:1 v/v; two concentrations of NPK (25:7:7 fertilizers, i.e. 1.75 and 2.5 g 1-l; and four frequencies of fertilizer application, i.e. every 1 day, 2 days, 3 days, and 4 days. The experiment was designed in a completely randomized block with four replications. Parameters observed were rooting capacity and cutting performances such as cutting height, cutting diameter, number of leaves, number of visible roots, and root length at 16 days after planting. The results showed that chrysanthemum cuttings rooted in carbonized rice husk had better performance than those rooted in coco peat, vermiculite, and mixture of perlite + vermiculite. Higher concentration of fertilizer solution up to 2.5 g l-1 also gave significant effect on the root formation and further root growth of cuttings. However, the rooting capacity of cuttings was not affected by the frequency of fertilizer application. This study implied that carbonized rice husk growing medium supplemented with NPK (2.5 g l-l every 4 days during rooting period is the choice for traditional chrysanthemum growers to increase the perform-ance and quality of the cut flowers.

  5. Making the cut

    Energy Technology Data Exchange (ETDEWEB)

    Mcshannon, G. [Hydra Mining Tools International Ltd. (United Kingdom)

    2006-04-15

    The paper explains how coal mines around the world can benefit from the use of cowless, radial shearer drums. Hydra Mining has designed and manufactured a range of shearer drums to combat problems ranging from dust, frictional ignitions, geological problems or low production rates. This allows the mine operator to maximise production efficiency. The company tailor-makes shearer drums for each longwall face to optimise the cutting performance of every installation. 8 figs.

  6. Cutting Out Continuations

    DEFF Research Database (Denmark)

    Bahr, Patrick; Hutton, Graham

    2016-01-01

    In the field of program transformation, one often transforms programs into continuation-passing style to make their flow of control explicit, and then immediately removes the resulting continuations using defunctionalisation to make the programs first-order. In this article, we show how these two...... transformations can be fused together into a single transformation step that cuts out the need to first introduce and then eliminate continuations. Our approach is calculational, uses standard equational reasoning techniques, and is widely applicable....

  7. Cutting forces during turning with variable depth of cut

    Directory of Open Access Journals (Sweden)

    M. Sadílek

    2016-03-01

    The proposed research for the paper is an experimental work – measuring cutting forces and monitoring of the tool wear on the cutting edge. It compares the turning where standard roughing cycle is used and the turning where the proposed roughing cycle with variable depth of cut is applied.

  8. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Ergun Kuru; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Len Volk; Mark Pickell; Evren Ozbayoglu; Barkim Demirdal; Paco Vieira; Affonso Lourenco

    1999-10-15

    This report includes a review of the progress made in ACTF Flow Loop development and research during 90 days pre-award period (May 15-July 14, 1999) and the following three months after the project approval date (July15-October 15, 1999) The report presents information on the following specific subjects; (a) Progress in Advanced Cuttings Transport Facility design and development, (b) Progress report on the research project ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (c) Progress report on the research project ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (d) Progress report on the research project ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (e) Progress report on the research project ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Progress report on the instrumentation tasks (Tasks 11 and 12) (g) Activities towards technology transfer and developing contacts with oil and service company members.

  9. Vortex cutting in superconductors

    Science.gov (United States)

    Vlasko-Vlasov, Vitalii K.; Koshelev, Alexei E.; Glatz, Andreas; Welp, Ulrich; Kwok, Wai-K.

    2015-03-01

    Unlike illusive magnetic field lines in vacuum, magnetic vortices in superconductors are real physical strings, which interact with the sample surface, crystal structure defects, and with each other. We address the complex and poorly understood process of vortex cutting via a comprehensive set of magneto-optic experiments which allow us to visualize vortex patterns at magnetization of a nearly twin-free YBCO crystal by crossing magnetic fields of different orientations. We observe a pronounced anisotropy in the flux dynamics under crossing fields and the filamentation of induced supercurrents associated with the staircase vortex structure expected in layered cuprates, flux cutting effects, and angular vortex instabilities predicted for anisotropic superconductors. At some field angles, we find formation of the vortex domains following a type-I phase transition in the vortex state accompanied by an abrupt change in the vortex orientation. To clarify the vortex cutting scenario we performed time-dependent Ginzburg-Landau simulations, which confirmed formation of sharp vortex fronts observed in the experiment and revealed a left-handed helical instability responsible for the rotation of vortices. This work was supported by the U.S. Department of Energy, Office of Science, Materials Sciences and Engineering Division.

  10. The role of N-lauroylethanolamine in the regulation of senescence of cut carnations (Dianthus caryophyllus).

    Science.gov (United States)

    Zhang, Yun; Guo, Wei-ming; Chen, Su-mei; Han, Liang; Li, Zheng-ming

    2007-08-01

    N-acylethanolamines (NAEs) are a group of lipid mediators that play important roles in mammals, but not much is known about their precise function in plants. In this work, we analyzed the possible involvement of N-lauroylethanolamine [NAE(12:0)] in the regulation of cut-flower senescence. In cut carnation flowers of cv. Red Barbara, the pulse treatment with 5 microM NAE(12:0) slowed senescence by delaying the onset of initial wilting. Ion leakage, which is a reliable indicator of membrane integrity, was postponed in NAE(12:0)-treated flowers. The lipid peroxidation increased in carnation petals with time, in parallel to the development in activity of lipoxygenase and superoxide anion production rate, and these increases were both delayed by NAE(12:0) supplementation. The activities of four enzymes (superoxide dismutase, catalase, glutathione reductase and ascorbate peroxidase) that are implicated in antioxidant defense were also upregulated in the cut carnations that had been treated with NAE(12:0). These data indicate that NAE(12:0)-induced delays in cut-carnation senescence involve the protection of the integrity of membranes via suppressing oxidative damage and enhancing antioxidant defense. We propose that the stage from the end of blooming to the onset of wilting is a critical period for NAE(12:0) action.

  11. Performance Testing of Cutting Fluids

    DEFF Research Database (Denmark)

    Belluco, Walter

    The importance of cutting fluid performance testing has increased with documentation requirements of new cutting fluid formulations based on more sustainable products, as well as cutting with minimum quantity of lubrication and dry cutting. Two sub-problems have to be solved: i) which machining...... tests feature repeatability, reproducibility and sensitivity to cutting fluids, and ii) to what extent results of one test ensure relevance to a wider set of machining situations. The present work is aimed at assessing the range of validity of the different testing methods, investigating correlation...... within the whole range of operations, materials, cutting fluids, operating conditions, etc. Cutting fluid performance was evaluated in turning, drilling, reaming and tapping, and with respect to tool life, cutting forces, chip formation and product quality (dimensional accuracy and surface integrity...

  12. CALCULATION OF LASER CUTTING COSTS

    OpenAIRE

    Bogdan Nedic; Milan Eric; Marijana Aleksijevic

    2016-01-01

    The paper presents description methods of metal cutting and calculation of treatment costs based on model that is developed on Faculty of mechanical engineering in Kragujevac. Based on systematization and analysis of large number of calculation models of cutting with unconventional methods, mathematical model is derived, which is used for creating a software for calculation costs of metal cutting. Software solution enables resolving the problem of calculating the cost of laser cutting, compar...

  13. Remote Laser Cutting of CFRP: Improvements in the Cut Surface

    Science.gov (United States)

    Stock, Johannes; Zaeh, Michael F.; Conrad, Markus

    In the automotive industry carbon fibre reinforced plastics (CFRP) are considered as a future key material to reduce the weight of the vehicle. Therefore, capable production techniques are required to process this material in mass industry. E.g., state of the art methods for cutting are limited by the high tool wear or the feasible feed rate. Laser cutting processes are still under investigation. This paper presents detailed new studies on remote laser cutting of CFRP focusing on the influence of the material properties and the quality of the cut surface. By adding light absorbing soot particles to the resin of the matrix, the cutting process is improved and fewer defects emerge.

  14. Mapping of genes for flower-related traits and QTLs for flowering ...

    Indian Academy of Sciences (India)

    Mapping of genes for flower-related traits and QTLs for flowering time ... which would greatly enhance the use of G. darwinii-specific desirable genes in ... used to determine all linkage groups, the order of groups on the same ... age groups.

  15. Mapping of genes for flower-related traits and QTLs for flowering ...

    Indian Academy of Sciences (India)

    Mapping of genes for flower-related traits and QTLs for flowering time in an interspecific population of Gossypium hirsutum × G. darwinii. Shuwen Zhang, Qianqian Lan, Xiang Gao, Biao Yang, Caiping Cai, Tianzhen Zhang and Baoliang Zhou. J. Genet. 95, 197–201. Table 1. Loci composition and recombination distances of ...

  16. Cytotoxic and bioactive properties of different color tulip flowers and degradation kinetic of tulip flower anthocyanins.

    Science.gov (United States)

    Sagdic, Osman; Ekici, Lutfiye; Ozturk, Ismet; Tekinay, Turgay; Polat, Busra; Tastemur, Bilge; Bayram, Okan; Senturk, Berna

    2013-08-01

    This study was conducted to determine the potential use of anthocyanin-based extracts (ABEs) of wasted tulip flowers as food/drug colorants. For this aim, wasted tulip flowers were samples and analyzed for their bioactive properties and cytotoxicity. Total phenolic contents of the extracts of the claret red (126.55 mg of gallic acid equivalent (GAE)/g dry extract) and orange-red (113.76 mg GAE/g dry extract) flowers were the higher than those of the other tulip flowers. Total anthocyanin levels of the violet, orange-red, claret red and pink tulip flower extracts were determined as 265.04, 236.49, 839.08 and 404.45 mg pelargonidin 3-glucoside/kg dry extract, respectively and these levels were higher than those of the other flowers. The extracts were more effective for the inhibition of Listeria monocytogenes, Staphylococcus aureus and Yersinia enterocolitica compared to other tested bacteria. Additionally, the cytotoxic effects of five different tulip flower extracts on human breast adenocarcinoma (MCF-7) cell line were investigated. The results showed that the orange red, pink and violet extracts had no cytotoxic activity against MCF-7 cell lines while yellow and claret red extracts appeared to be toxic for the cells. Overall, the extracts of tulip flowers with different colors possess remarkable bioactive and cytotoxic properties. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. Cutting agents for special metals

    International Nuclear Information System (INIS)

    Sugito, Seiji; Sakakibara, Fumi

    1979-01-01

    The quantity of use of special metals has increased year after year in the Plasma Research Institute, Nagoya University, with the development of researches on plasma and nuclear fusion. Most of these special metals are hard to cut, and in order to secure the surface smoothness and dimensional accuracy, considerable efforts are required. The method of experiment is as follows: cutting agents salt water and acetone, rape-seed oil, sulfide and chloride oil and water soluble cutting oil W grade 3; metals to be cut niobium, molybdenum, tantalum, titanium and tungsten; cutting conditions cutting speed 4.7 to 90 m/min, feed 0.07 to 0.2 mm/rev, depth of cut 0.1 to 0.4 mm, tool cemented carbide bit. Chemicals such as tetrachloromethane and trichloroethane give excellent cutting performance, but the toxicity is intense and the stimulative odor exists, accordingly they are hard to use practically. Cutting was easier when the salt water added with acetone was used than the case of rape-seed oil, but salt water is corrosive. Recently, the machining of molybdenum has been often carried out, and the water soluble cutting oil was the best. It is also good for cutting stainless steel, and its lubricating property is improved by adding some additives such as sulfur, chlorine, phosphorus and molybdenum disulfide. However after cutting with it, washing is required. (Kako, I.)

  18. Bioactive compounds in edible flowers processed by radiation; Compostos bioativos em flores comestiveis processadas por radiacao

    Energy Technology Data Exchange (ETDEWEB)

    Koike, Amanda Cristina Ramos

    2015-07-01

    Edible flowers are increasingly being used in culinary preparations, being also recognized for their potential valuable effects in human health, which require new approaches to improve their conservation and safety. These highly perishable products should be grown without using any pesticide. Irradiation treatment might be the answer to these problems, ensuring food quality, increasing shelf-life and disinfestation of foods. Irradiation treatment might be the answer to these problems, to ensure food quality, to increase shelf-life and disinfestation of foods. Tropaeolum majus L. (nasturtium) and Viola tricolor L. (johnny-jump-up) flowers are widely used in culinary preparations, being also acknowledged for their antioxidant properties and high content of phenolics. The purpose of this study was to evaluate the dose-dependent effects of gamma and electron beam irradiation (doses of 0, 0.5, 0.8 and 1 kGy) on the antioxidant activity, phenolic compounds, physical aspects and antiproliferative potential of edible flowers. Kaempferol-O-hexoside-O-hexoside was the most abundant compound in all samples of Tropaeolum majus flower while pelargonidin-3-O-sophoroside was the major anthocyanin. In general, irradiated samples gave higher antioxidant activity, probably due to their higher amounts of phenolic compounds, which were also favored by the 1.0 kGy dose, regardless of the source . The Viola tricolor samples displayed flavonols as the most abundant phenolic compounds, particularly those derived from quercetin. In general, gamma-irradiated samples, independently of the applied dose, showed higher amounts in phenolic compounds, which were also favored by the 1.0 kGy dose, regardless of the source. The antioxidant activity was also higher among irradiated samples. The two species of edible flowers have not provided the samples did not show potential antiproliferative and cytotoxicity. Accordingly, the applied irradiation treatments seemed to represent a feasible technology

  19. Dietary fiber content and associated antioxidant compounds in Roselle flower (Hibiscus sabdariffa L.) beverage.

    Science.gov (United States)

    Sáyago-Ayerdi, Sonia G; Arranz, Sara; Serrano, José; Goñi, Isabel

    2007-09-19

    The beverage of Hibiscus sabdariffa flowers is widely consumed in Mexico. Polyphenols contained in plant foods are frequently associated with dietary fiber. The aim of this work is to quantify the dietary fiber, associated polyphenols, and antioxidant capacity of the Roselle flower and the beverage traditionally prepared from it and its contribution to the Mexican diet. Roselle flower contained dietary fiber as the largest component (33.9%) and was rich in phenolic compounds (6.13%). Soluble dietary fiber was 0.66 g/L in beverage, and 66% of total extractable polyphenols contained in Roselle flower passed to the beverage and showed an antioxidant capacity of 335 micromoL trolox equivalents/100 mL beverage measured by ABTS. These data suggest that Roselle flower beverage intake in the Mexican diet may contribute around 166 and 165 mg/per serving to the intake of dietary fiber and polyphenols, respectively. The health benefits from consumption of Hibiscus beverage could be of considerable benefit to the whole population.

  20. Flower volatiles, crop varieties and bee responses.

    Directory of Open Access Journals (Sweden)

    Björn K Klatt

    Full Text Available Pollination contributes to an estimated one third of global food production, through both the improvement of the yield and the quality of crops. Volatile compounds emitted by crop flowers mediate plant-pollinator interactions, but differences between crop varieties are still little explored. We investigated whether the visitation of crop flowers is determined by variety-specific flower volatiles using strawberry varieties (Fragaria x ananassa Duchesne and how this affects the pollination services of the wild bee Osmia bicornis L. Flower volatile compounds of three strawberry varieties were measured via headspace collection. Gas chromatography showed that the three strawberry varieties produced the same volatile compounds but with quantitative differences of the total amount of volatiles and between distinct compounds. Electroantennographic recordings showed that inexperienced females of Osmia bicornis had higher antennal responses to all volatile compounds than to controls of air and paraffin oil, however responses differed between compounds. The variety Sonata was found to emit a total higher level of volatiles and also higher levels of most of the compounds that evoked antennal responses compared with the other varieties Honeoye and Darselect. Sonata also received more flower visits from Osmia bicornis females under field conditions, compared with Honeoye. Our results suggest that differences in the emission of flower volatile compounds among strawberry varieties mediate their attractiveness to females of Osmia bicornis. Since quality and quantity of marketable fruits depend on optimal pollination, a better understanding of the role of flower volatiles in crop production is required and should be considered more closely in crop-variety breeding.

  1. Flower power: tree flowering phenology as a settlement cue for migrating birds.

    Science.gov (United States)

    McGrath, Laura J; van Riper, Charles; Fontaine, Joseph J

    2009-01-01

    1. Neotropical migrant birds show a clear preference for stopover habitats with ample food supplies; yet, the proximate cues underlying these decisions remain unclear. 2. For insectivorous migrants, cues associated with vegetative phenology (e.g. flowering, leaf flush, and leaf loss) may reliably predict the availability of herbivorous arthropods. Here we examined whether migrants use the phenology of five tree species to choose stopover locations, and whether phenology accurately predicts food availability. 3. Using a combination of experimental and observational evidence, we show migrant populations closely track tree phenology, particularly the flowering phenology of honey mesquite (Prosopis glandulosa), and preferentially forage in trees with more flowers. Furthermore, the flowering phenology of honey mesquite reliably predicts overall arthropod abundance as well as the arthropods preferred by migrants for food. 4. Together, these results suggest that honey mesquite flowering phenology is an important cue used by migrants to assess food availability quickly and reliably, while in transit during spring migration.

  2. Kaempferol glycosides in the flowers of carnation and their contribution to the creamy white flower color.

    Science.gov (United States)

    Iwashina, Tsukasa; Yamaguchi, Masa-atsu; Nakayama, Masayoshi; Onozaki, Takashi; Yoshida, Hiroyuki; Kawanobu, Shuji; Onoe, Hiroshi; Okamura, Masachika

    2010-12-01

    Three flavonol glycosides were isolated from the flowers of carnation cultivars 'White Wink' and 'Honey Moon'. They were identified from their UV, MS, 1H and 13C NMR spectra as kaempferol 3-O-neohesperidoside, kaempferol 3-O-sophoroside and kaempferol 3-O-glucosyl-(1 --> 2)-[rhamnosyl-(1 --> 6)-glucoside]. Referring to previous reports, flavonols occurring in carnation flowers are characterized as kaempferol 3-O-glucosides with additional sugars binding at the 2 and/or 6-positions of the glucose. The kaempferol glycoside contents of a nearly pure white flower and some creamy white flower lines were compared. Although the major glycoside was different in each line, the total kaempferol contents of the creamy white lines were from 5.9 to 20.9 times higher than the pure white line. Thus, in carnations, kaempferol glycosides surely contribute to the creamy tone of white flowers.

  3. A simulation study on the interactive effects of radiation and plant density on growth of cut chrysanthemum

    NARCIS (Netherlands)

    Lee, J.H.; Heuvelink, E.; Challa, H.

    2002-01-01

    In the present study, we used a photosynthesis-driven crop growth model to determine acceptable plant densities for cut chrysanthemum throughout the year at different intensities of supplementary light. Dry matter partitioning between leaves, stems, and flowers was simulated as a function of crop

  4. A functional-structural plant model for cut roses - new techniques for modelling manipulation of plant structure

    NARCIS (Netherlands)

    Buck-Sorlin, G.H.; Burema, B.S.; Vos, J.; Lieth, J.H.; Heuvelink, E.; Visser, de P.H.B.; Marcelis, L.F.M.

    2011-01-01

    Experience is the main guide for cut rose growers to make decisions on crop management and climate control. Because of continuous change in cultivar characteristics and technology there is a need for a general theory, capturing how the number of flower shoots produced and their quality depend on the

  5. Can You Cut It?

    DEFF Research Database (Denmark)

    Kjær, Tina; Lillelund, Christoffer Bredo; Moth-Poulsen, Mie

    2017-01-01

    The advent of affordable virtual reality (VR) displays and 360◦ video cameras has sparked an interest in bringing cinematic experiences from the screen and into VR. However, it remains uncertain whether traditional approaches to filmmaking can be directly applied to cinematic VR. Historically......’ sense of disorientation and their ability to follow the story, during exposure to fictional 360◦ films experienced using a head-mounted display. The results revealed no effects of increased cut frequency which leads us to conclude that editing need not pose a problem in relation to cinematic VR, as long...

  6. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Stefan Miska; Nicholas Takach; Kaveh Ashenayi

    2004-07-31

    We have tested the loop elevation system. We raised the mast to approximately 25 to 30 degrees from horizontal. All went well. However, while lowering the mast, it moved laterally a couple of degrees. Upon visual inspection, severe spalling of the concrete on the face of the support pillar, and deformation of the steel support structure was observed. At this time, the facility is ready for testing in the horizontal position. A new air compressor has been received and set in place for the ACTS test loop. A new laboratory has been built near the ACTS test loop Roughened cups and rotors for the viscometer (RS300) were obtained. Rheologies of aqueous foams were measured using three different cup-rotor assemblies that have different surface roughness. The relationship between surface roughness and foam rheology was investigated. Re-calibration of nuclear densitometers has been finished. The re-calibration was also performed with 1% surfactant foam. A new cuttings injection system was installed at the bottom of the injection tower. It replaced the previous injection auger. A mechanistic model for cuttings transport with aerated mud has been developed. Cuttings transport mechanisms with aerated water at various conditions were experimentally investigated. A total of 39 tests were performed. Comparisons between the model predictions and experimental measurements show a satisfactory agreement. Results from the ultrasonic monitoring system indicated that we could distinguish between different sand levels. We also have devised ways to achieve consistency of performance by securing the sensors in the caps in exactly the same manner as long as the sensors are not removed from the caps. A preliminary test was conducted on the main flow loop at 100 gpm flow rate and 20 lb/min cuttings injection rate. The measured bed thickness using the ultrasonic method showed a satisfactory agreement with nuclear densitometer readings. Thirty different data points were collected after the test

  7. Cutting the Cord-2

    Science.gov (United States)

    2004-01-01

    This animation shows the view from the rear hazard avoidance cameras on the Mars Exploration Rover Spirit as the rover turns 45 degrees clockwise. This maneuver is the first step in a 3-point turn that will rotate the rover 115 degrees to face west. The rover must make this turn before rolling off the lander because airbags are blocking it from exiting from the front lander petal. Before this crucial turn took place, engineers instructed the rover to cut the final cord linking it to the lander. The turn took around 30 minutes to complete.

  8. Cutting the Cord

    Science.gov (United States)

    2004-01-01

    This animation shows the view from the front hazard avoidance cameras on the Mars Exploration Rover Spirit as the rover turns 45 degrees clockwise. This maneuver is the first step in a 3-point turn that will rotate the rover 115 degrees to face west. The rover must make this turn before rolling off the lander because airbags are blocking it from exiting off the front lander petal. Before this crucial turn could take place, engineers instructed the rover to cut the final cord linking it to the lander. The turn took around 30 minutes to complete.

  9. Urea assisted electrochemical synthesis of flower-like platinum arrays with high electrocatalytic activity

    International Nuclear Information System (INIS)

    Zhang, Ming; Lv, Jing-Jing; Li, Fang-Fang; Bao, Ning; Wang, Ai-Jun; Feng, Jiu-Ju; Zhou, Dan-Ling

    2014-01-01

    Graphical abstract: A simple, facile, and controllable method was developed for preparation of well-defined flower-like Pt arrays via one-step electrodeposition, assisted with urea as a growth directing agent. The as-prepared Pt nanocrystals have a larger electroactive surface area and higher electrocatalytic activity toward ethylene glycol and methanol oxidation in acid media, compared with Pt nanoparticles and commercial Pt black catalysts. - Highlights: • Well-defined flower-like Pt arrays were prepared via one-step electrodeposition, assisted with urea as a growth directing agent. • This method is simple, facile, and controllable, without using any template, seed or surfactant. • The Pt arrays show an enhanced electrocatalytic activity toward ethylene glycol and methanol oxidation. - Abstract: In this paper, well-defined flower-like Pt arrays were prepared on the glassy carbon electrode by one-step electrodeposition at–0.3 V for 600 s in 0.5 M H 2 SO 4 containing 5 mM H 2 PtCl 6 and 150 mM urea. This method is simple, facile, and controllable, without using any template, seed or surfactant. The experimental parameters were investigated and found urea acted as a growth directing agent. The as-prepared Pt nanocrystals were preferentially growing along the (111) directions, which were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy dispersive X-ray (EDX). Moreover, the flower-like Pt nanoarrays exhibited a large effective surface area (EASA) and enhanced performance toward the oxidation of ethylene glycol and methanol in acid media, compared with Pt nanoparticles and commercial Pt black catalysts. This strategy can be extended to prepare other noble metal nanostructures as good electrocatalysts in fuel cells

  10. Flowering time control in European winter wheat

    Directory of Open Access Journals (Sweden)

    Simon Martin Langer

    2014-10-01

    Full Text Available Flowering time is an important trait in wheat breeding as it affects adaptation and yield potential. The aim of this study was to investigate the genetic architecture of flowering time in European winter bread wheat cultivars. To this end a population of 410 winter wheat varieties was evaluated in multi-location field trials and genotyped by a genotyping-by-sequencing approach and candidate gene markers. Our analyses revealed that the photoperiod regulator Ppd-D1 is the major factor affecting flowering time in this germplasm set, explaining 58% of the genotypic variance. Copy number variation at the Ppd-B1 locus was present but explains only 3.2% and thus a comparably small proportion of genotypic variance. By contrast, the plant height loci Rht-B1 and Rht-D1 had no effect on flowering time. The genome-wide scan identified six QTL which each explain only a small proportion of genotypic variance and in addition we identified a number of epistatic QTL, also with small effects. Taken together, our results show that flowering time in European winter bread wheat cultivars is mainly controlled by Ppd-D1 while the fine tuning to local climatic conditions is achieved through Ppd-B1 copy number variation and a larger number of QTL with small effects.

  11. Tiger cubs and little flowers.

    Science.gov (United States)

    1993-01-01

    Short vignettes are related to show the conditions for girls and women in Morocco. Descriptions are given for child labor, literacy, the government's education campaign, youth group efforts to enhance family planning (FP) knowledge, the impact of FP outreach in rural areas, and unmarried mothers. In Morocco's cities, young boys can be seen hawking cigarettes and working in market stalls; in the countryside, boys herd goats or do other farm work. In rural areas girls are hidden by having them perform work around the house or on the farm primarily indoors. Women are supervised by women. 54% work as maids and 39% are apprentices in carpet factories. Parents prefer to have their daughters working and consider it protection from mischief as well as needed income. Only 60% of girls are enrolled in primary school vs. 80% of the boys. In rural areas, only 44% of girls are enrolled, and 20% stay to complete their primary education, while 76% of boys enroll and 63% complete primary school. Literacy of women has an effect on the ability to accurately take birth control pills. All ages of women gather at schools in the evening for lessons in reading and writing in a program supported by the King. Women are pleased with their success in just learning how to write their own names. Television advertisements promote sending children to school, as another part of the Ministry of Education's campaign to increase girl's educational status. There are still not enough schools; many schools are double shift, and communities are building their own schools. Youth clubs, which refer to boys as "tiger cubs" and girls as "little flowers," try to familiarize young people with some basic information about contraception. A traditional midwife relates some problems with girl's education: costs for clothing and supplies, worry about male teachers, and poor role models. In some remote areas, farm families do not send their children to school, because of the distance to schools and the need for

  12. Leptogenesis: The other cuts

    International Nuclear Information System (INIS)

    Garbrecht, Bjoern

    2011-01-01

    For standard leptogenesis from the decay of singlet right-handed neutrinos, we derive source terms for the lepton asymmetry that are present in a finite density background but absent in the vacuum. These arise from cuts through the vertex correction to the decay asymmetry, where in the loop either the Higgs boson and the right-handed neutrino or the left-handed lepton and the right-handed neutrino are simultaneously on-shell. We evaluate the source terms numerically and use them to calculate the lepton asymmetry for illustrative points in parameter space, where we consider only two right-handed neutrinos for simplicity. Compared to calculations where only the standard cut through the propagators of left-handed lepton and Higgs boson is included, sizable corrections arise when the masses of the right-handed neutrinos are of the same order, but the new sources are found to be most relevant when the decaying right-handed neutrino is heavier than the one in the loop. In that situation, they can yield the dominant contribution to the lepton asymmetry.

  13. CO2 laser cutting

    CERN Document Server

    Powell, John

    1998-01-01

    The laser has given manufacturing industry a new tool. When the laser beam is focused it can generate one of the world's most intense energy sources, more intense than flames and arcs, though similar to an electron beam. In fact the intensity is such that it can vaporise most known materials. The laser material processing industry has been growing swiftly as the quality, speed and new manufacturing possibilities become better understood. In the fore of these new technologies is the process of laser cutting. Laser cutting leads because it is a direct process substitu­ tion and the laser can usually do the job with greater flexibility, speed and quality than its competitors. However, to achieve these high speeds with high quality con­ siderable know how and experience is required. This information is usually carefully guarded by the businesses concerned and has to be gained by hard experience and technical understanding. Yet in this book John Powell explains in lucid and almost non­ technical language many o...

  14. Antioxidant activity of Dianthus chinensis L. flowers processed by ionizing radiation

    International Nuclear Information System (INIS)

    Koike, Amanda C.R.; Villavicencio, Anna L.C.H.; Barros, Lillian; Antonio, Amilcar L.; Ferreira, Isabel C.F.R.

    2017-01-01

    Edible flowers are increasingly used in culinary preparations, which require new approaches to improve their conservation and safety. Irradiation treatment is safe and an effective alternative for food conservation, guaranteeing food quality, increasing shelf-life and disinfestation. This technology offers a versatile way to get good quality food while reducing post-harvest losses. Dianthus chinensis L. flowers, popularly known as Chinese pink, are widely used in culinary preparations, being also acknowledged for their bioactive components and antioxidant properties. The purpose of this study was to evaluate the antioxidant activity of D. chinensis flowers submitted to electron beam and gamma irradiation at 0, 0.5, 0.8 and 1 kGy. The antioxidant properties were evaluated through the 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity, reducing power and β-carotene bleaching inhibition assays. Total phenolics were determined by the Folin-Ciocalteu assay. The antioxidant activity was higher for irradiated samples, especially those treated with 0.5 and 0.8 kGy, independently of the radiation source, which showed the highest capacity to inhibit β-carotene bleaching inhibition. Accordingly, the applied irradiation treatments seemed to represent feasible technology to preserve the quality of edible flower petals, being able to improve the antioxidant activity. (author)

  15. Antioxidant activity of Dianthus chinensis L. flowers processed by ionizing radiation

    Energy Technology Data Exchange (ETDEWEB)

    Koike, Amanda C.R.; Villavicencio, Anna L.C.H., E-mail: amandaramos@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNE-SP), Sao Paulo, SP (Brazil); Barros, Lillian; Antonio, Amilcar L.; Ferreira, Isabel C.F.R., E-mail: iferreira@ipb.pt [Centro de Investigação de Montanha (CIMO) - ESA, Instituto Politécnico de Bragança (Portugal)

    2017-07-01

    Edible flowers are increasingly used in culinary preparations, which require new approaches to improve their conservation and safety. Irradiation treatment is safe and an effective alternative for food conservation, guaranteeing food quality, increasing shelf-life and disinfestation. This technology offers a versatile way to get good quality food while reducing post-harvest losses. Dianthus chinensis L. flowers, popularly known as Chinese pink, are widely used in culinary preparations, being also acknowledged for their bioactive components and antioxidant properties. The purpose of this study was to evaluate the antioxidant activity of D. chinensis flowers submitted to electron beam and gamma irradiation at 0, 0.5, 0.8 and 1 kGy. The antioxidant properties were evaluated through the 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging activity, reducing power and β-carotene bleaching inhibition assays. Total phenolics were determined by the Folin-Ciocalteu assay. The antioxidant activity was higher for irradiated samples, especially those treated with 0.5 and 0.8 kGy, independently of the radiation source, which showed the highest capacity to inhibit β-carotene bleaching inhibition. Accordingly, the applied irradiation treatments seemed to represent feasible technology to preserve the quality of edible flower petals, being able to improve the antioxidant activity. (author)

  16. Flower development: open questions and future directions.

    Science.gov (United States)

    Wellmer, Frank; Bowman, John L; Davies, Brendan; Ferrándiz, Cristina; Fletcher, Jennifer C; Franks, Robert G; Graciet, Emmanuelle; Gregis, Veronica; Ito, Toshiro; Jack, Thomas P; Jiao, Yuling; Kater, Martin M; Ma, Hong; Meyerowitz, Elliot M; Prunet, Nathanaël; Riechmann, José Luis

    2014-01-01

    Almost three decades of genetic and molecular analyses have resulted in detailed insights into many of the processes that take place during flower development and in the identification of a large number of key regulatory genes that control these processes. Despite this impressive progress, many questions about how flower development is controlled in different angiosperm species remain unanswered. In this chapter, we discuss some of these open questions and the experimental strategies with which they could be addressed. Specifically, we focus on the areas of floral meristem development and patterning, floral organ specification and differentiation, as well as on the molecular mechanisms underlying the evolutionary changes that have led to the astounding variations in flower size and architecture among extant and extinct angiosperms.

  17. Flower Constancy, Insect Psychology, and Plant Evolution

    Science.gov (United States)

    Chittka, Lars; Thomson, James D.; Waser, Nickolas M.

    Individuals of some species of pollinating insects tend to restrict their visits to only a few of the available plant species, in the process bypassing valuable food sources. The question of why this flower constancy exists is a rich and important one with implications for the organization of natural communities of plants, floral evolution, and our understanding of the learning processes involved in finding food. Some scientists have assumed that flower constancy is adaptive per se. Others argued that constancy occurs because memory capacity for floral features in insects is limited, but attempts to identify the limitations often remained rather simplistic. We elucidate now different sensory and motor memories from natural foraging tasks are stored and retrieved, using concepts from modern learning science and visual search, and conclude that flower constancy is likely to have multiple causes. Possible constraints favoring constancy are interference sensitivity of short-term memory, and temporal limitations on retrieving information from long-term memory as rapidly as from short-term memory, but further empirical evidence is needed to substantiate these possibilities. In addition, retrieving memories may be slower and more prone to errors when there are several options than when an insect copes with only a single task. In addition to memory limitations, we also point out alternative explanations for flower constancy. We then consider the way in which floral parameters, such as interplant distances, nectar rewards, flower morphology, and floral color (as seen through bees' eyes) affect constancy. Finally, we discuss the implications of pollinator constancy for plant evolution. To date there is no evidence that flowers have diverged to favor constancy, although the appropriate tests may not have yet been conducted. However, there is good evidence against the notion that pollinator constancy is involved in speciation or maintenance of plant species integrity.

  18. Species interactions in an Andean bird–flowering plant network: phenology is more important than abundance or morphology

    Directory of Open Access Journals (Sweden)

    Oscar Gonzalez

    2016-12-01

    Full Text Available Biological constraints and neutral processes have been proposed to explain the properties of plant–pollinator networks. Using interactions between nectarivorous birds (hummingbirds and flowerpiercers and flowering plants in high elevation forests (i.e., “elfin” forests of the Andes, we explore the importance of biological constraints and neutral processes (random interactions to explain the observed species interactions and network metrics, such as connectance, specialization, nestedness and asymmetry. In cold environments of elfin forests, which are located at the top of the tropical montane forest zone, many plants are adapted for pollination by birds, making this an ideal system to study plant–pollinator networks. To build the network of interactions between birds and plants, we used direct field observations. We measured abundance of birds using mist-nets and flower abundance using transects, and phenology by scoring presence of birds and flowers over time. We compared the length of birds’ bills to flower length to identify “forbidden interactions”—those interactions that could not result in legitimate floral visits based on mis-match in morphology. Diglossa flowerpiercers, which are characterized as “illegitimate” flower visitors, were relatively abundant. We found that the elfin forest network was nested with phenology being the factor that best explained interaction frequencies and nestedness, providing support for biological constraints hypothesis. We did not find morphological constraints to be important in explaining observed interaction frequencies and network metrics. Other network metrics (connectance, evenness and asymmetry, however, were better predicted by abundance (neutral process models. Flowerpiercers, which cut holes and access flowers at their base and, consequently, facilitate nectar access for other hummingbirds, explain why morphological mis-matches were relatively unimportant in this system. Future

  19. Flowering of Woody Bamboo in Tissue Culture Systems

    Directory of Open Access Journals (Sweden)

    Jin-Ling Yuan

    2017-09-01

    Full Text Available Flowering and subsequent seed set are not only normal activities in the life of most plants, but constitute the very reason for their existence. Woody bamboos can take a long time to flower, even over 100 years. This makes it difficult to breed bamboo, since flowering time cannot be predicted and passing through each generation takes too long. Another unique characteristic of woody bamboo is that a bamboo stand will often flower synchronously, both disrupting the supply chain within the bamboo industry and affecting local ecology. Therefore, an understanding of the mechanism that initiates bamboo flowering is important not only for biology research, but also for the bamboo industry. Induction of flowering in vitro is an effective way to both shorten the flowering period and control the flowering time, and has been shown for several species of bamboo. The use of controlled tissue culture systems allows investigation into the mechanism of bamboo flowering and facilitates selective breeding. Here, after a brief introduction of flowering in bamboo, we review the research on in vitro flowering of bamboo, including our current understanding of the effects of plant growth regulators and medium components on flower induction and how in vitro bamboo flowers can be used in research.

  20. Genetic markers for flowering in perennial ryegrass

    DEFF Research Database (Denmark)

    Paina, Cristiana; Byrne, Stephen; Andersen, Jeppe Reitan

    2011-01-01

    Perennial ryegrass (Lolium perenne L.) is the principal forage grass utilized in Danish agriculture and underpins the beef and dairy sectors. It is characterized as having high digestibility, high nutritional value, and high productivity during vegetative growth. However, at the reproductive growth...... genes will be converted to molecular markers and mapped in an existing mapping population previously characterized for flowering time and vernalization response. References: Amasino, R.M., Michaels S.D. (2010). The Timing of Flowering. Plant Physiology 154: 516–520 Greenup, A., W. Peacock, W.J., Dennis...

  1. Pollination in avocado flowers (Persea Americana Mill.)

    OpenAIRE

    Malerbo-Souza, Darclet Teresinha; Faculdade de Agronomia Dr. Francisco Maeda; Toledo, Vagner de Alencar Arnaut de; UEM; Silva, Simone Rodrigues da; Faculdade de Agronomia Dr. Francisco Maeda; Sousa, Francisco Fábio; Faculdade de Agronomia Dr. Francisco Maeda

    2008-01-01

    The experiment aimed to study the frequency, nectar and/or pollen and hoarding time of bees in avocado flowers and verify the effect of their visits on fruit production. Six inflorescences (three covered and three uncovered) with two replications were marked to evaluate the effect of cross pollination on fruition percentage. The honey bees showed two peaks of hoarding (by 11 to 12 a.m. and 5 p.m.) following the flowers opening of different avocado groups (groups A and B), as much for nectar a...

  2. Refuges, flower strips, biodiversity and agronomic interest.

    Science.gov (United States)

    Roy, Grégory; Wateau, Karine; Legrand, Mickaël; Oste, Sandrine

    2008-01-01

    Several arthropods are natural predators of pests, and they are able to reduce and control their population development. FREDON Nord Pas-de-Calais (Federation Regionate de Defense contre les Organismes Nuisibles = Regional Federation for Pest Control) has begun for a long time to form farmers to the recognition of beneficial arthropods and to show them their usefulness. These beneficial insects or arachnids are present everywhere, in orchards and even in fields which are areas relatively poor in biodiversity. Adults feed in the flower strips instead larvae and some adults feed on preys such as aphids or caterpillars. Most of the time, beneficial insects can regulate pest but sometimes, in agricultural area, they can't make it early enough and efficiently. Their action begin too late and there biodiversity and number are too low. It's possible to enhance their action by manipulating the ecological infrastructures, like sewing flower strips or installing refuges. Flower strips increase the density of natural enemies and make them be present earlier in the field in order to control pests. Refuges permit beneficial's to spend winter on the spot. So they're able to be active and to grow in number earlier. From 2004 to 2007, on the one hand, FREDON Nord Pas-de-Calais has developed a research program. Its purpose was to inventory practices and also tools and means available and to judge the advisability of using such or such beneficial refuge in orchards. On the second hand, it studied the impact in orchard of refuges on population of beneficial's and the difference there were between manufactured refuges and homemade refuges. Interesting prospects were obtained with some of them. Otherwise, since 2003, FREDON has studied flower strips influence on beneficial population and their impact on pest control. In cabbage fields, results of trials have shown that flower strips lead to a reduction of aphid number under acceptable economic level, up to 50 meters from flower strips

  3. Aerodynamic Interactions During Laser Cutting

    Science.gov (United States)

    Fieret, J.; Terry, M. J.; Ward, B. A.

    1986-11-01

    Most laser cutting systems utilise a gas jet to remove molten or vaporised material from the kerf. The speed, economy and quality of the cut can be strongly dependent on the aerodynamic conditions created by the nozzle, workpiece proximity and kerf shape. Adverse conditions can be established that may lead to an unwelcome lack of reproducibility of cut quality. Relatively low gas nozzle pressures can result in supersonic flow in the jet with its associated shock fronts. When the nozzle is placed at conventional distances (1-2mm) above the workpiece, the force exerted by the gas on the workpiece and the cut products (the cutting pressure) can be significantly less than the nozzle pressure. Higher cutting pressures can be achieved by increasing the height of the nozzle above the workpiece, to a more damage resistant zone, provided that the shock structure of the jet is taken into account. Conventional conical nozzles with circular exits can be operated with conditions that will result in cutting pressures up to 3 Bar (g) in the more distant zone. At higher pressures in circular tipped nozzles the cutting pressure in this zone decays to inadequate levels. Investigations of a large number of non-circular nozzle tip shapes have resulted in the selection of a few specific shapes that can provide cutting pressures in excess of 6 Bar(g) at distances of 4 to 7mm from the nozzle tip. Since there is a strong correlation between cutting pressure and the speed and quality of laser cutting, the paper describes the aerodynamic requirements for achieving the above effects and reports the cutting results arising from the different nozzle designs and conditions. The results of the work of other investigators, who report anomalous laser cutting results, will be examined and reviewed in the light of the above work.

  4. The effect of ethylene on sucrose-uptake by senescing petunia flowers.

    OpenAIRE

    2008-01-01

    The influence of sucrose as an important factor in the vase-life of cut flowers has been dually noted. Sucrose is actively transported across the cell membrane via a symport system and the membrane-imbedded ATPase enzyme generates the required energy and proton gradient for the process. The activity of this enzyme decreases during the senescence of Petunia petals, concomitant with a decrease in sucrose-uptake in the post-climacteric phase. However, ATP does not appear to be limiting, indicati...

  5. 7 CFR 319.74-2 - Conditions governing the entry of cut flowers.

    Science.gov (United States)

    2010-01-01

    .... imported from Colombia or the Dominican Republic because of the finding of agromyzids, when such agromyzids..., Brazil, Brunei, Canary Islands, Chile, China, Colombia, Croatia, Ecuador, Iceland, Japan, Korea... the inspector, they cannot be cleaned or treated, or if they contain soil or other prohibited...

  6. Elegant lady a pink longiflorum lily cultivar suitable for cut flower forcing

    NARCIS (Netherlands)

    Lim Ki-Byung,; Tuyl, van J.M.

    2004-01-01

    A new pink longiflorum (Lilium longiflorum x (L. longiforum x L. rubellum)) lily cultivar was obtained by integrated intersectional hybridization techniques. The F1 intersectional hybrid was obtained by crossing between L. longiflorum 'Gelria' and wild type L. rubellum. Since the F1 hybrid was

  7. Environmental governance of pesticides in Ethiopian vegetable and cut flower production

    NARCIS (Netherlands)

    Mengistie, Belay

    2016-01-01

    Pesticides are intensively used in agriculture across the globe to prevent or control pests, diseases, and weeds. In this process, improper pesticide registration, distribution and use has become more serious, which has resulted in heavy environmental and human health risks in many parts of the

  8. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Stefan Miska; Nicholas Takach; Kaveh Ashenayi

    2004-01-31

    Final design of the mast was completed (Task 5). The mast is consisting of two welded plate girders, set next to each other, and spaced 14-inches apart. Fabrication of the boom will be completed in two parts solely for ease of transportation. The end pivot connection will be made through a single 2-inch diameter x 4 feet-8 inch long 316 SS bar. During installation, hard piping make-ups using Chiksan joints will connect the annular section and 4-inch return line to allow full movement of the mast from horizontal to vertical. Additionally, flexible hoses and piping will be installed to isolate both towers from piping loads and allow recycling operations respectively. Calibration of the prototype Foam Generator Cell has been completed and experiments are now being conducted. We were able to generate up to 95% quality foam. Work is currently underway to attach the Thermo-Haake RS300 viscometer and install a view port with a microscope to measure foam bubble size and bubble size distribution. Foam rheology tests (Task 13) were carried out to evaluate the rheological properties of the proposed foam formulation. After successful completion of the first foam test, two sets of rheological tests were conducted at different foam flow rates while keeping other parameters constant (100 psig, 70F, 80% quality). The results from these tests are generally in agreement with the previous foam tests done previously during Task 9. However, an unanticipated observation during these tests was that in both cases, the frictional pressure drop in 2 inch pipe was lower than that in the 3 inch and 4 inch pipes. We also conducted the first foam cuttings transport test during this quarter. Experiments on aerated fluids without cuttings have been completed in ACTF (Task 10). Gas and liquid were injected at different flow rates. Two different sets of experiments were carried out, where the only difference was the temperature. Another set of tests was performed, which covered a wide range of

  9. Skin Cut Construction

    DEFF Research Database (Denmark)

    2017-01-01

    projects - among others - from ARC are included: Soft Structures builds upon of a series of experimental use of EPS hot wire cutting, where the EPS eventually act as formwork for concrete casting. The processing of the EPS is distinct and delimited by the behaviour and form of both the robot and tool...... of steel and concrete makes it a reliable approach to many challenges in the realisation of buildings. Rebar Inside Out attempts to rethink the possibilities of the reinforced concrete composite starting from its inside. This means starting with the reinforcing steel, the production and shaping of this......, and then through that process build a workflow for the production of the concrete composite. It also means letting the steel out of the concrete, thereby positioning the two materials in a transnational relationship between steel construction and concrete composite....

  10. Influence of pulsing biocides on vase life of cut roses ( Rosa hybrida ...

    African Journals Online (AJOL)

    The results depicted that treatments comprised NaOCl and HQS were able to prolong the vase life of the cut flower stalks up to 15.80 and 15.40 days respectively while Al2(SO4)3 did not offer statistically significant advantage over the use of ordinary tap water. Spectrometric analysis on solution turbidity of the vase solutions ...

  11. Growth, flowering and fruiting in vitro pineapple (Ananas comosus L ...

    African Journals Online (AJOL)

    pc star

    2013-04-10

    Apr 10, 2013 ... ... under natural conditions is favoured by shortened day-length and cool night temperatures (Van Overbeek and Cruzado, 1948; ..... pineapple plants after acclimatization b) flower of formation c) growth flower d) formation fruit ...

  12. Glyphosate and Dicamba Inhibit Flowering of Native Willamette Valley Plants

    Science.gov (United States)

    Successful flowering is essential for reproduction of native plants and production of food for herbivores. It is also an important alternative endpoint for assessment of ecological risks from chemical stressors such as herbicides. We evaluated flowering phenology after herbicide...

  13. Simulated Acid Rain-induced Alterations in Flowering, Leaf ...

    African Journals Online (AJOL)

    Evaluation of SAR effects on budding, flowering, leaf abscission and pollen development revealed that ... Keywords: Simulated acid rain, Helianthus annuus, flowering, leaf abscission, pollen germination, sunflower. ... HOW TO USE AJOL.

  14. A specific bioassay for the inhibition of flowering.

    Science.gov (United States)

    Blake, J

    1972-06-01

    A bioassay for the inhibition of flowering involving the in vitro culture of excised, partially-induced, apices of Viscaria candida is described. This bioassay has been used to detect flowering inhibition in extracts from Kalanchoe blossfeldiana.

  15. Increasing of the cutting power at inserts for application in the area of power industry

    Energy Technology Data Exchange (ETDEWEB)

    Fulemova, Jaroslava; Janda, Zdenek [University of West Bohemia in Pilsen, Faculty of mechanical engineering, Department of Machining technology, Plzen (Czech Republic)

    2013-07-01

    This article deals with the influence of cutting edge preparation on tool life, cutting forces and the roughness of machined surface. The cutting edge preparation was done on the inserts with wiper geometry which are used during machining of dividing plane at a steam turbine casing. This cutting inserts were prepared by the technology of drag finishing on the edge radius 5, 10 and 15 µ m. The work piece material was ferritic – martensitic steel with the content of 9%Mo and 1%Cr and the material of cutting inserts was submicron sintered carbide. There was used only one cutting insert in the milling cutter. Key words: edge radius, milling, tool life, roughness, forces.

  16. Seed yield of radish as affected by uprooting time and root cutting

    Directory of Open Access Journals (Sweden)

    A. H. M. Shohidul Hoque

    2015-08-01

    Full Text Available The experiment was conducted at the Bangabandhu Sheikh Mujibur Rahman Agricultural University (BSMRAU, Gazipur, Bangladesh during November 2005 to April 2006 to study the seed production potentiality of BSMRAU developed open pollinated radish varieties (viz., BU Mula 1 and BU Mula 2 under two levels of root cutting (viz., one third and no cutup and three levels of uprooting namely 30, 40 and 50 days after sowing (DAS. Results revealed that both root cutting and uprooting days significantly influenced most of the characters pertaining to seed yield per plant. Root cutting delayed the flowering, pod initiation, maturation of siliqua and reduced plant height, number of branches per plant, number of siliqua per plant, and number of seeds per siliqua. The yields were also impaired by root cutting. In general, the entire yield components and seed yield were highly affected with the one third root cutting. Various uprooting days also had influenced these characters. In case of treatment combination of no cut and 30 days of uprooting there was a significant difference between the varieties. The variety BU Mula 2 produced better seed yield per plot than BU Mula 1. Also in both the varieties the 1/3rd cut treatment with 30 or 50 days uprooting sequence showed unsatisfied number of seeds per siliqua in comparison to the no cut treatment except 40 days uprooting.

  17. Extraction method for high free radical scavenging activity of Siamese neem tree flowers

    Directory of Open Access Journals (Sweden)

    Worarat Chaisawangwong

    2009-10-01

    Full Text Available Siamese neem tree (Azadirachta indica A. Juss. var. siamensis Valeton is a medicinal plant found in Thailand. Youngleaves and young flowers of this plant are commonly consumed as a bitter tonic vegetable. The flowers are also used fortreatment of fever. The flower extract has been reported to exhibit in vitro free radical scavenging activity and can inhibitlipid peroxidation of bronchogenic cancer cell line. Active compounds in the flowers are flavonoids such as rutin andquercetin. The content of these compounds in the crude extract depends on the method of extraction. Therefore, the appropriateextraction method promoting high yield of total flavonoids and high free radical scavenging activity was investigated inthis study. Six different extraction methods, i.e. maceration, percolation, decoction, soxhlet extraction, ultrasonic extraction(UE, and microwave assisted extraction (MA were carried out for extracting dried powder of Siamese neem tree young flowers. The solvent used for maceration, percolation, and soxhlet extraction was 50% ethanol, while distilled water was used for decoction and MA, and both solvents were used for UE. The content of crude extract, free radical scavenging activity, and total flavonoids content of each extract were investigated and compared. Comparing the various extraction methods, decoction provided an extract containing a high amount of total flavonoids (17.54 mgRE/g extract and promoting the highest scavenging activity at EC50 11.36 g/ml. Decoction is also simple, cheap, and convenient and could be used in developing countries. Thus, it should be the recommended extraction method for the flowers of Siamese neem tree for furtherdevelopment of antioxidant pharmaceutical preparations.

  18. Semantic Versus Syntactic Cutting Planes

    OpenAIRE

    Filmus, Yuval; Hrubeš, Pavel; Lauria, Massimo

    2016-01-01

    In this paper, we compare the strength of the semantic and syntactic version of the cutting planes proof system. First, we show that the lower bound technique of Pudlák applies also to semantic cutting planes: the proof system has feasible interpolation via monotone real circuits, which gives an exponential lower bound on lengths of semantic cutting planes refutations. Second, we show that semantic refutations are stronger than syntactic ones. In particular, we give a formula for whic...

  19. Laser Cutting of Different Materials

    Directory of Open Access Journals (Sweden)

    Kadir ÇAVDAR

    2013-08-01

    Full Text Available In this paper; in general potential developments and trends of a particular machining field by extensively evaluating present studies of laser beam machining have been discussed. As it is indicated below, technical literatures have been subsumed under five major headlines: Experimental studies, reviews, optimization researches of the cutting parameters, theoretical modelling studies of laser beam cutting and academic studies relating to laser cutting

  20. Latest development of laser cutting

    OpenAIRE

    Wetzig, Andreas; Herwig, Patrick; Hauptmann, Jan; Goppold, Cindy; Baumann, Robert; Fürst, Andreas; Rose, Michael; Pinder, Thomas; Mahrle, Achim; Beyer, Eckhard

    2016-01-01

    Laser cutting was one of the first applications of laser material processing. Today, laser cutting is the most widespread application among laser material processing besides laser marking. Meanwhile, nearly each material can be cut by means of a laser, in particular since ultra short pulse lasers are available in the power range of up to 100 W. The to be cut material can come with thicknesses from a few microns till tens of millimeters as flat stock or as free form shapes. The paper will conc...

  1. CALCULATION OF LASER CUTTING COSTS

    Directory of Open Access Journals (Sweden)

    Bogdan Nedic

    2016-09-01

    Full Text Available The paper presents description methods of metal cutting and calculation of treatment costs based on model that is developed on Faculty of mechanical engineering in Kragujevac. Based on systematization and analysis of large number of calculation models of cutting with unconventional methods, mathematical model is derived, which is used for creating a software for calculation costs of metal cutting. Software solution enables resolving the problem of calculating the cost of laser cutting, comparison' of costs made by other unconventional methods and provides documentation that consists of reports on estimated costs.

  2. [Historical consideration of tea trees and tea flowers, especially regarding the use of tea flowers as food].

    Science.gov (United States)

    Harima, Shoichi; Yoshikawa, Masayuki; Tokuoka, Kiyoshi

    2008-01-01

    Not only tea leaves, but also many kinds of plants have been used as tea, even those plants not belonging to Camellia sinensis, and they should be called "tea out of tea" in the Lucidophyllous forest zone. Generally, the tea leaf is drank after being decocted (almost boiled). The growth distribution of tea ranges in a belt-like zone of 30-40 degrees north latitude. Therefore, tea might have grown wild as "YAMACHA (mountain tea)" from ancient times in Japan as well as China. The first recored of tea drinking in Japan is the ceremony of "GYOUCHA" at the Imperial Court of the Emperor SHOUMU in 729. On the other hand, the oldest book about tea in China (CHAKYOU) was written in 770. Therefore, it seems that tea drinking started at nearly the same time in both countries. Tea was dispensed as medical supplies by Chinese medicinal prescription (SENKYUCHACHOUSAN) in Japan, but in China, tea was used as powdered medicine for drinking (SEICHA). However, the leaf of a certain plant used as "tea out of tea," was applied as a galenical preparation for traditional Chinese medicinal constitution. However, it is not possible to judge whether or not there was adaptability in Chinese medicine theory. In Japan, when tea was first consumed as a food, other than a few exceptions tea leaves were used as a coarse tea (BANCHA) until the latter half of the Meiji period. Mixing in air by stirring a tea solution, and at the same time, letting tea match with hot water. It was wisdom to improve the taste. As a result, in order to make bubble well, both of the condition and technique were devised. One of the approaches was to add the dried plant of Leguminosae (saponin) or tea flower (saponin), when "BANCHA" was decorted. And also tools such as a bamboo tea whisk (CHASEN) as well as bowl (GOROHACHI-CHAWAN), were conceived. "FURICHA" was served as a medicine by KUUYASHOUNIN in Japan in 951. Afterwards, the prayer ceremonies at shrines and temples used CHARAZU," showing the custom to serve tea in

  3. The Early Flowers and Angiosperm Evolution

    DEFF Research Database (Denmark)

    Friis, Else Marie; Crane, P.R.; Pedersen, Kaj Raunsgaard

    of the evolutionary history of flowering plants from their earliest phases in obscurity to their dominance in modern vegetation. The discussion provides comprehensive biological and geological background information, before moving on to summarise the fossil record in detail. Including previously unpublished results...

  4. Nauriaq Aglagvinmi (The Flower in the Classroom).

    Science.gov (United States)

    Pope, Mary L.; And Others

    This elementary language text is designed for children in bilingual Inupiat-English programs in the Alaskan villages of Ambler, Kobuk, Kiana, Noorvik, and Shungnak. It contains a story about a flower that begins to grow in a rug in a classroom. Each page of text is illustrated with a black-and-white drawing. The English equivalent is given at the…

  5. Functional optics of glossy buttercup flowers

    NARCIS (Netherlands)

    van der Kooi, Casper J; Elzenga, J Theo M; Dijksterhuis, Jan; Stavenga, Doekele G

    2017-01-01

    Buttercup (Ranunculus spp.) flowers are exceptional because they feature a distinct gloss (mirror-like reflection) in addition to their matte-yellow coloration. We investigated the optical properties of yellow petals of several Ranunculus and related species using (micro)spectrophotometry and

  6. Teaching Art with Art: Flowers in Art.

    Science.gov (United States)

    Hubbard, Guy

    1998-01-01

    Justifies examining still-life pictures of flowers to provide students with an opportunity to learn how one distinguishes between deeply artistic pictures full of emotion and pictures lacking this quality. Claims that students will develop their own artistic expression. Offers pictures by Diego Rivera, Watanabe Shiko, Consuelo Kanaga, and Rachel…

  7. Divergence of flowering genes in soybean

    Indian Academy of Sciences (India)

    2012-10-15

    Oct 15, 2012 ... and the production of dry matter in crops (Cockram et al. 2007). Thus ..... is repressed by AP1 in emerging flower primordia (Liu et al. 2007). ..... conserved QTLs for disease resistance and seed size (Kim et al. 2009b).

  8. Flower opening and closure: a review

    NARCIS (Netherlands)

    Doorn, van W.G.; Meeteren, van U.

    2003-01-01

    Flower opening and closure are traits of a reproductive syndrome, as it allows pollen removal and/or pollination. Various types of opening can be distinguished such as nocturnal and diurnal and single or repetitive. Opening is generally due to cell expansion. Osmotic solute levels increase by the

  9. Interspecific hybridization of flower bulbs: a review

    NARCIS (Netherlands)

    Tuyl, van J.M.

    1997-01-01

    In order to introduce new characters such as resistances, flower shape and colour, from wild species into the cultivar assortment of lily it is necessary to overcome interspecific crossing barriers.. Several techniques have been used for wide interspecific lily crosses with species and cultivars

  10. Shortening the juvenile phase for flowering

    NARCIS (Netherlands)

    Higazy, M.K.M.T.

    1962-01-01

    Higazy tried to determine whether the duration of the juvenile phase for flowering was a fixed character or whether it could be influenced by external growth factors.

    Lunaria biennis was chosen as a cold-requiring biennial, Silene armeria as a long-day plant and Salvia

  11. Tuhar pulse flowers corroding by corrosive pollutants | Singh ...

    African Journals Online (AJOL)

    These acids in turn develop micro electrochemical cell with flower of Tuhar pulse which destroy flowering of arhar pulse. Other factors are acid rain, global warming and depletion of ozone layer affecting the production of arhar pulse. Key words: Tuhar (Arhar) pulse flowers, pollutants, particulates, micro electrochemical cell, ...

  12. Flowering and sex expression in Acer L. : a biosystematic study

    NARCIS (Netherlands)

    Jong, de P.C.

    1976-01-01

    A review and an analysis is given of flowering and sex expression in Acer. The process of sex differentiation was studied in physiological experiments and could be influenced by accelerated flowering and by removal of female.gif flower buds just after bud break. The

  13. Phenolic Profiles, Phytchemicals and Mineral Content of Decoction and Infusion of Opuntia ficus-indica Flowers.

    Science.gov (United States)

    Ammar, Imene; Ennouri, Monia; Bouaziz, Mohamed; Ben Amira, Amal; Attia, Hamadi

    2015-12-01

    Opuntia flowers are a natural source of biologically active compounds and they have been used as medicinal plant for a long time. Despite the various uses reported for the decoction and infusion of these flowers, their characterization has been discarded. In this study, the decoction and infusion prepared from Opuntia ficus-indica were analyzed with respect to their content in minerals and phytochemicals in order to evaluate its nutritional characteristics. The obtained data proved that these preparations are a rich source of minerals mainly K and Ca. Moreover, the phytochemical analysis revealed that they have important polyphenols, flavonoids and tannins contents with the infusion that presented the highest polyphenol levels. LC-MS analyses of decoction and infusion allowed the characterization of 20 phenolic compounds. It is mainly identified by the presence of flavonols glycosides.

  14. Combined effect of gamma irradiation methods and in vitro explant sources on mutation induction of flower color in Chrysanthemum morifoliun Ramat

    International Nuclear Information System (INIS)

    Nagatomi, Shigeki; Miyahira, Eiken; Degi, Konosuke

    1997-01-01

    Effective radiation breeding method was searched by establishing an effective exposure method to induce a mutation involved in flower color of chrysanthemum and clarifying the effects of its combined use with cultured explants. A chrysanthemum 'Taihei', a variety suitable for cut-flower use was used as the subject, which was irradiated at a dose ranging from 0.25-1.5 Gy/day for 20 days. The floral petals, buds and leaves were used as the explants for callus induction culture. The flower color was evaluated using Japanese Standard Color chart for Horticultural Plants. The color spectrum of the adaxial surface of a petal was recorded by spectro-photometer TC-1800 MK-2. Thus, six mutants of flower color were registered as new varieties. Either of these mutants was derived from chronic irradiation. Three varieties from petal culture, two from bud one and one from cutting culture were obtained, showing that the combined method of chronic irradiation and organ culture is useful in practice for mutation breeding of flower species. Further, this method is applicable for production of non-chimeric mutants, enhancement of the mutation rate and widening the mutation spectra in vegetatively propagated plants. (M.N.)

  15. Successful treatment of sodium oxalate induced urolithiasis with Helichrysum flowers.

    Science.gov (United States)

    Onaran, Metin; Orhan, Nilüfer; Farahvash, Amirali; Ekin, Hasya Nazlı; Kocabıyık, Murat; Gönül, İpek Işık; Şen, İlker; Aslan, Mustafa

    2016-06-20

    Helichrysum (Asteraceae) flowers, known as "altın otu, yayla çiçeği, kudama çiçeği" , are widely used to remove kidney stones and for their diuretic properties in Turkey. To determine the curative effect of infusions prepared from capitulums of Helichrysum graveolens (M. Bieb.) Sweet (HG) and H. stoechas ssp. barellieri (Ten.) Nyman (HS) on sodium oxalate induced kidney stones. Infusions prepared from the capitulums of HG and HS were tested for their curative effect on calcium oxalate deposition induced by sodium oxalate (70mg/kg i.p.). Following the injection of sodium oxalate for 5 days, plant extracts were administered to rats at two different doses. Potassium citrate was used as positive control. Water intake, urine volume, body, liver and kidney weights were measured; biochemical and hematological analyses were conducted on urine and blood samples. Additionally, histopathological examinations were done on kidney samples. H. stoechas extract showed prominent effect at 156mg/kg dose (stone formation score: 0.33), whereas number of kidney stones was maximum in sodium oxalate group (stone formation score: 2.33). The reduction in the uric acid and oxalate levels of urine samples and the elevation in the urine citrate levels are significant and promising in extract groups. Some hematological, biochemical and enzymatic markers are also ameliorated by the extracts. This is the first report on the curative effect of immortal flowers. Our preliminary study indicated that Helichrysum extracts may be used for treatment of urolithiasis and Helichrysum extracts are an alternative therapy to potassium citrate for patients suffering from kidney stones. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  16. Flower colour and cytochromes P450.

    Science.gov (United States)

    Tanaka, Yoshikazu; Brugliera, Filippa

    2013-02-19

    Cytochromes P450 play important roles in biosynthesis of flavonoids and their coloured class of compounds, anthocyanins, both of which are major floral pigments. The number of hydroxyl groups on the B-ring of anthocyanidins (the chromophores and precursors of anthocyanins) impact the anthocyanin colour, the more the bluer. The hydroxylation pattern is determined by two cytochromes P450, flavonoid 3'-hydroxylase (F3'H) and flavonoid 3',5'-hydroxylase (F3'5'H) and thus they play a crucial role in the determination of flower colour. F3'H and F3'5'H mostly belong to CYP75B and CYP75A, respectively, except for the F3'5'Hs in Compositae that were derived from gene duplication of CYP75B and neofunctionalization. Roses and carnations lack blue/violet flower colours owing to the deficiency of F3'5'H and therefore lack the B-ring-trihydroxylated anthocyanins based upon delphinidin. Successful redirection of the anthocyanin biosynthesis pathway to delphinidin was achieved by expressing F3'5'H coding regions resulting in carnations and roses with novel blue hues that have been commercialized. Suppression of F3'5'H and F3'H in delphinidin-producing plants reduced the number of hydroxyl groups on the anthocyanidin B-ring resulting in the production of monohydroxylated anthocyanins based on pelargonidin with a shift in flower colour to orange/red. Pelargonidin biosynthesis is enhanced by additional expression of a dihydroflavonol 4-reductase that can use the monohydroxylated dihydrokaempferol (the pelargonidin precursor). Flavone synthase II (FNSII)-catalysing flavone biosynthesis from flavanones is also a P450 (CYP93B) and contributes to flower colour, because flavones act as co-pigments to anthocyanins and can cause blueing and darkening of colour. However, transgenic plants expression of a FNSII gene yielded paler flowers owing to a reduction of anthocyanins because flavanones are precursors of anthocyanins and flavones.

  17. Cyanogenic Glucosides and Derivatives in Almond and Sweet Cherry Flower Buds from Dormancy to Flowering

    Directory of Open Access Journals (Sweden)

    Jorge Del Cueto

    2017-05-01

    Full Text Available Almond and sweet cherry are two economically important species of the Prunus genus. They both produce the cyanogenic glucosides prunasin and amygdalin. As part of a two-component defense system, prunasin and amygdalin release toxic hydrogen cyanide upon cell disruption. In this study, we investigated the potential role within prunasin and amygdalin and some of its derivatives in endodormancy release of these two Prunus species. The content of prunasin and of endogenous prunasin turnover products in the course of flower development was examined in five almond cultivars – differing from very early to extra-late in flowering time – and in one sweet early cherry cultivar. In all cultivars, prunasin began to accumulate in the flower buds shortly after dormancy release and the levels dropped again just before flowering time. In almond and sweet cherry, the turnover of prunasin coincided with increased levels of prunasin amide whereas prunasin anitrile pentoside and β-D-glucose-1-benzoate were abundant in almond and cherry flower buds at certain developmental stages. These findings indicate a role for the turnover of cyanogenic glucosides in controlling flower development in Prunus species.

  18. Design and analysis of gasket cutting machine

    Directory of Open Access Journals (Sweden)

    Vipin V. Gopal

    2016-03-01

    Full Text Available Paper is about the design and analysis of the optimized gasket cutting machine which can be provide to the companies where there is use of gaskets at a certain interval of time. The paper contain the cost optimized machine which is provide at a much lower cost as compared to the machines presently available in the market. This machine can be specifically used for the boiler and refrigeration companies where the gaskets are used to avoid the leakage due to the joining of two different diametric pipes. Inspite of giving a large order of gaskets, they can prepare the same at small rate whenever needed at the location.

  19. A cutting fluid

    Energy Technology Data Exchange (ETDEWEB)

    Kajdas, C.; Dominiak, M.; Kozinski, R.; Misterkiewicz, B.; Polowniak, J.; Szczepaniak, S.

    1982-06-30

    The cutting fluid (SOZh) contains 0.5 to 10 percent vegetable or animal fats, selectively sulfurized in the presence of a catalyst (Kt): 0.1 to 10 percent chlorinated C2O to C3O paraffins, which contain 10 to 50 percent Chlorine in a molecule, and 0.001 to 0.5 percent dialkyldithiocarbamic or alkylen-bis-(dithiocarbamic) acids or their salts or derivatives of the form (R(R')NC(S)SRn'', (CH2)n(NHC(S)S)2R'' or R(R')NC(S)SnC(S)(R)R', where R and R' are alkyl or cycloalkyl of the C1 to C6 fractions, R'' is Hydrogen, a metal, or aliphatic or heterocyclic amine, n = 2 to 6 and 0.001 to 0.3 percent of heterocyclic mercaptanes or disulfides of the cited formula, where A is Nitrogen or Sulfur, and up to 100 percent petroleum oil with a kinematic viscosity of 5 to 50 square millimeters per second at 323K.

  20. 76 FR 4278 - Notice of Availability of Pest Risk Analyses for the Importation of Fresh Edible Flowers of Izote...

    Science.gov (United States)

    2011-01-25

    ...] Notice of Availability of Pest Risk Analyses for the Importation of Fresh Edible Flowers of Izote... prepared pest risk analyses that evaluate the risks associated with the importation into the continental... risks of introducing or disseminating plant pests or noxious weeds via the importation of fresh edible...

  1. Shearer drums - the cutting edge

    Energy Technology Data Exchange (ETDEWEB)

    O' Neill, M.; Wright, C.

    2004-09-15

    The paper discusses continuous miner and shearer cutters. It claims cutting drum require the same level of engineering know-how and technical expertise as do the machines driving them, and that the cutting drum, whether on a longwall shearer or continuous miner, comprises, the steel, pedestals, bit holders and the bits.

  2. Water-Cut Sensor System

    KAUST Repository

    Karimi, Muhammad Akram; Shamim, Atif; Arsalan, Muhammad

    2018-01-01

    Provided in some embodiments is a method of manufacturing a pipe conformable water-cut sensors system. Provided in some embodiments is method for manufacturing a water-cut sensor system that includes providing a helical T-resonator, a helical ground

  3. Tubing and cable cutting tool

    Science.gov (United States)

    Mcsmith, D. D.; Richardson, J. I. (Inventor)

    1984-01-01

    A hand held hydraulic cutting tool was developed which is particularly useful in deactivating ejection seats in military aircraft rescue operations. The tool consists primarily of a hydraulic system composed of a fluid reservoir, a pumping piston, and an actuator piston. Mechanical cutting jaws are attached to the actuator piston rod. The hydraulic system is controlled by a pump handle. As the pump handle is operated the actuator piston rod is forced outward and thus the cutting jaws are forced together. The frame of the device is a flexible metal tubing which permits easy positioning of the tool cutting jaws in remote and normally inaccessible locations. Bifurcated cutting edges ensure removal of a section of the tubing or cable to thereby reduce the possibility of accidental reactivation of the tubing or cable being severed.

  4. Cutting method and device underwater

    International Nuclear Information System (INIS)

    Takano, Genta; Kamei, Hiromasa; Beppu, Seiji

    1998-01-01

    A place of material to be cut is surrounded by an openable/closable box. The material to be cut is cut underwater, and materials generated in this case are removed from the cut portion by a pressurized water jet. The removed materials are sucked and recovered together with water in the box. Among the materials caused by the cutting underwater, solid materials not floating on water are caused to stay in the midway of a sucking and recovering channel. A large sucking force might be required for the entire region of the sucking and recovering channel when sucking and recovering large sized solid materials not floating on water, but even large sized materials can be recovered easily according to the present invention since they are recovered after being sucked and stayed in the midway of the sucking and recovering channel. (N.H.)

  5. Cutting concrete with abrasion jet

    International Nuclear Information System (INIS)

    Yie, G.G.

    1982-01-01

    Fluidyne Corporation has developed a unique process and apparatus that allow selected abrasives to be introduced into high-speed waterjet to produce abrasive-entrained waterjet that has high material-cutting capabilities, which is termed by Fluidyne as the Abrasion Jet. Such Abrasion Jet has demonstrated capability in cutting hard rock and concrete at a modest pressure of less than 1360 bars (20,000 psi) and a power input of less than 45 kW (60 horsepower). Abrasion Jet cutting of concrete is characterized by its high rate of cutting, flexible operation, good cut quality, and relatively low costs. This paper presents a general description of this technology together with discussions of recent test results and how it could be applied to nuclear decontamination and decommissioning work. 8 references

  6. Sinuous Flow in Cutting of Metals

    Science.gov (United States)

    Yeung, Ho; Viswanathan, Koushik; Udupa, Anirudh; Mahato, Anirban; Chandrasekar, Srinivasan

    2017-11-01

    Using in situ high-speed imaging, we unveil details of a highly unsteady plastic flow mode in the cutting of annealed and highly strain-hardening metals. This mesoscopic flow mode, termed sinuous flow, is characterized by repeated material folding, large rotation, and energy dissipation. Sinuous flow effects a very large shape transformation, with local strains of ten or more, and results in a characteristic mushroomlike surface morphology that is quite distinct from the well-known morphologies of metal-cutting chips. Importantly, the attributes of this unsteady flow are also fundamentally different from other well-established unsteady plastic flows in large-strain deformation, like adiabatic shear bands. The nucleation and development of sinuous flow, its dependence on material properties, and its manifestation across material systems are demonstrated. Plastic buckling and grain-scale heterogeneity are found to play key roles in triggering this flow at surfaces. Implications for modeling and understanding flow stability in large-strain plastic deformation, surface quality, and preparation of near-strain-free surfaces by cutting are discussed. The results point to the inadequacy of the widely used shear-zone models, even for ductile metals.

  7. Effects of different petal thickness on gas sensing properties of flower-like WO3·H2O hierarchical architectures

    International Nuclear Information System (INIS)

    Zeng, Wen; Zhang, He; Wang, Zhongchang

    2015-01-01

    Graphical abstract: In this work, we prepare four different petal thicknesses of hierarchical WO 3 ·H 2 O architectures via a simple hydrothermal process, and systematically report their formation mechanisms and gas-sensing properties. - Highlights: • Flower-like WO 3 ·H 2 O architectures with different petal thickness were reported. • The WO 3 ·H 2 O sheet-flower sensor shows a significantly enhanced gas response. • A possible growth mechanism for the flower-like architectures is proposed. - Abstract: Hierarchical architectures consisting of two-dimensional (2D) nanostructures are of great interest for potential use in recent year. Here, we report the successful synthesis of four hierarchical tungsten oxide flower-like architectures via a simple yet facile hydrothermal method. The as-prepared WO 3 ·H 2 O hierarchical architectures are in fact assembled with numerous nanosheets or nanoplates. Through a comprehensive characterization of microstructures and morphologies of the as-prepared products, we find that petal thickness is a key factor for affecting gas-sensing performances. We further propose a possible growth mechanism for the four flower-like architectures. Moreover, gas-sensing measurements showed that the well-defined sheet-flower WO 3 ·H 2 O hierarchical architectures exhibited the excellent gas-sensing properties to ethanol owing to their largest amount of thin petal structures and pores

  8. Transcriptomic Analysis of Flower Bud Differentiation in Magnolia sinostellata

    Directory of Open Access Journals (Sweden)

    Lijie Fan

    2018-04-01

    Full Text Available Magnolias are widely cultivated for their beautiful flowers, but despite their popularity, the molecular mechanisms regulating flower bud differentiation have not been elucidated. Here, we used paraffin sections and RNA-seq to study the process of flower bud differentiation in Magnolia sinostellata. Flower bud development occurred between 28 April and 30 May 2017 and was divided into five stages: undifferentiated, early flower bud differentiation, petal primordium differentiation, stamen primordium differentiation, and pistil primordium differentiation. A total of 52,441 expressed genes were identified, of which 11,592 were significantly differentially expressed in the five bud development stages. Of these, 82 genes were involved in the flowering. In addition, MADS-box and AP2 family genes play critical roles in the formation of flower organs and 20 differentially expressed genes associated with flower bud differentiation were identified in M. sinostellata. A qRT-PCR analysis verified that the MADS-box and AP2 family genes were expressed at high levels during flower bud differentiation. Consequently, this study provides a theoretical basis for the genetic regulation of flowering in M. sinostellata, which lays a foundation for further research into flowering genes and may facilitate the development of new cultivars.

  9. Mobile Application to Identify Indonesian Flowers on Android Platform

    Directory of Open Access Journals (Sweden)

    Tita Karlita

    2013-12-01

    Full Text Available Although many people love flowers, they do not know their name. Especially, many people do not recognize local flowers. To find the flower image, we can use search engine such as Google, but it does not give much help to find the name of local flower. Sometimes, Google cannotshow the correct name of local flowers. This study proposes an application to identify Indonesian flowers that runs on the Android platform for easy use anywhere. Flower recognition is based on the color features using the Hue-Index, shape feature using Centroid Contour Distance (CCD, and the similarity measurement using Entropy calculations. The outputs of this application are information about inputted flower image including Latinname, local name, description, distribution and ecology. Based on tests performed on 44 types of flowers with 181 images in the database, the best similarity percentage is 97.72%. With this application, people will be expected to know more about Indonesia flowers. Keywords: Indonesian flowers, android, hue-index, CCD, entropy

  10. Explaining the apparent paradox of persistent selection for early flowering.

    Science.gov (United States)

    Austen, Emily J; Rowe, Locke; Stinchcombe, John R; Forrest, Jessica R K

    2017-08-01

    Decades of observation in natural plant populations have revealed pervasive phenotypic selection for early flowering onset. This consistent pattern seems at odds with life-history theory, which predicts stabilizing selection on age and size at reproduction. Why is selection for later flowering rare? Moreover, extensive evidence demonstrates that flowering time can and does evolve. What maintains ongoing directional selection for early flowering? Several non-mutually exclusive processes can help to reconcile the apparent paradox of selection for early flowering. We outline four: selection through other fitness components may counter observed fecundity selection for early flowering; asymmetry in the flowering-time-fitness function may make selection for later flowering hard to detect; flowering time and fitness may be condition-dependent; and selection on flowering duration is largely unaccounted for. In this Viewpoint, we develop these four mechanisms, and highlight areas where further study will improve our understanding of flowering-time evolution. © 2017 The Authors. New Phytologist © 2017 New Phytologist Trust.

  11. When can stress facilitate divergence by altering time to flowering?

    Science.gov (United States)

    Jordan, Crispin Y; Ally, Dilara; Hodgins, Kathryn A

    2015-12-01

    Stressors and heterogeneity are ubiquitous features of natural environments, and theory suggests that when environmental qualities alter flowering schedules through phenotypic plasticity, assortative mating can result that promotes evolutionary divergence. Therefore, it is important to determine whether common ecological stressors induce similar changes in flowering time. We review previous studies to determine whether two important stressors, water restriction and herbivory, induce consistent flowering time responses among species; for example, how often do water restriction and herbivory both delay flowering? We focus on the direction of change in flowering time, which affects the potential for divergence in heterogeneous environments. We also tested whether these stressors influenced time to flowering and nonphenology traits using Mimulus guttatus. The literature review suggests that water restriction has variable effects on flowering time, whereas herbivory delays flowering with exceptional consistency. In the Mimulus experiment, low water and herbivory advanced and delayed flowering, respectively. Overall, our results temper theoretical predictions for evolutionary divergence due to habitat-induced changes in flowering time; in particular, we discuss how accounting for variation in the direction of change in flowering time can either increase or decrease the potential for divergence. In addition, we caution against adaptive interpretations of stress-induced phenology shifts.

  12. Large and abundant flowers increase indirect costs of corollas: a study of coflowering sympatric Mediterranean species of contrasting flower size.

    Science.gov (United States)

    Teixido, Alberto L; Valladares, Fernando

    2013-09-01

    Large floral displays receive more pollinator visits but involve higher production and maintenance costs. This can result in indirect costs which may negatively affect functions like reproductive output. In this study, we explored the relationship between floral display and indirect costs in two pairs of coflowering sympatric Mediterranean Cistus of contrasting flower size. We hypothesized that: (1) corolla production entails direct costs in dry mass, N and P, (2) corollas entail significant indirect costs in terms of fruit set and seed production, (3) indirect costs increase with floral display, (4) indirect costs are greater in larger-flowered sympatric species, and (5) local climatic conditions influence indirect costs. We compared fruit set and seed production of petal-removed flowers and unmanipulated control flowers and evaluated the influence of mean flower number and mean flower size on relative fruit and seed gain of petal-removed and control flowers. Fruit set and seed production were significantly higher in petal-removed flowers in all the studied species. A positive relationship was found between relative fruit gain and mean individual flower size within species. In one pair of species, fruit gain was higher in the large-flowered species, as was the correlation between fruit gain and mean number of open flowers. In the other pair, the correlation between fruit gain and mean flower size was also higher in the large-flowered species. These results reveal that Mediterranean environments impose significant constraints on floral display, counteracting advantages of large flowers from the pollination point of view with increased indirect costs of such flowers.

  13. Colorimetric analysis of edible flower of Dendranthema grandiflorum processed by ionizing radiation

    Energy Technology Data Exchange (ETDEWEB)

    Koike, Amanda C. Ramos; Rodrigues, Flavio Thihara; Fanaro, Gustavo Bernardes; Villavicencio, Anna Lucia C.H., E-mail: amandaramosk@gmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2013-07-01

    Edible flowers can be used to add flavor, color, taste and visual appeal to culinary preparations as salads, soups, desserts and drinks. There are many edible flowers rich in minerals, vitamins, pollen, nectar and other essential nutrients that are important for human nutrition. Food irradiation is a viable technology for disinfestation of insect, to increase extending the shelf life of perishable products and improving the hygienic quality of food. The irradiation technology is a good alternative method to replace chemical fumigation of pest insects present in foods and flowers. The purpose of this study was evaluate the color of Dendranthema grandiflorum exposed low-dose ionizing radiation: 0.3 kGy, 0.4 kGy, 0.5 kGy, 0.6 kGy, 0.7 kGy, and 0.8 kGy of {sup 60}Co using colorimeter (Konica Minolta Chroma Meter CR-400), were used samples of chrysanthemum in yellow, white and red. The petals of the flowers were used for the chromaticity value. The samples of irradiated chrysanthemum (white, yellow and red) processed with 0.3 to 0.6 kGy haven't shown significantly difference when compared to the control sample, the dose of 0.3 kGy, dose it is necessary to sterilize. (author)

  14. Colorimetric analysis of edible flower of Dendranthema grandiflorum processed by ionizing radiation

    International Nuclear Information System (INIS)

    Koike, Amanda C. Ramos; Rodrigues, Flavio Thihara; Fanaro, Gustavo Bernardes; Villavicencio, Anna Lucia C.H.

    2013-01-01

    Edible flowers can be used to add flavor, color, taste and visual appeal to culinary preparations as salads, soups, desserts and drinks. There are many edible flowers rich in minerals, vitamins, pollen, nectar and other essential nutrients that are important for human nutrition. Food irradiation is a viable technology for disinfestation of insect, to increase extending the shelf life of perishable products and improving the hygienic quality of food. The irradiation technology is a good alternative method to replace chemical fumigation of pest insects present in foods and flowers. The purpose of this study was evaluate the color of Dendranthema grandiflorum exposed low-dose ionizing radiation: 0.3 kGy, 0.4 kGy, 0.5 kGy, 0.6 kGy, 0.7 kGy, and 0.8 kGy of 60 Co using colorimeter (Konica Minolta Chroma Meter CR-400), were used samples of chrysanthemum in yellow, white and red. The petals of the flowers were used for the chromaticity value. The samples of irradiated chrysanthemum (white, yellow and red) processed with 0.3 to 0.6 kGy haven't shown significantly difference when compared to the control sample, the dose of 0.3 kGy, dose it is necessary to sterilize. (author)

  15. Flower colour modification of chrysanthemum by suppression of F3'H and overexpression of the exogenous Senecio cruentus F3'5'H gene.

    Directory of Open Access Journals (Sweden)

    Huang He

    Full Text Available Chrysanthemum (Chrysanthemum × morifolium is one of the most important ornamental plants in the world. They are typically used as cut flowers or potted plants. Chrysanthemum can exhibit red, purple, pink, yellow and white flowers, but lack bright red and blue flowers. In this study, we identified two chrysanthemum cultivars, C × morifolium 'LPi' and C × morifolium 'LPu', that only accumulate flavonoids in their ligulate flowers. Next, we isolated seven anthocyanin biosynthesis genes, namely CmCHS, CmF3H, CmF3'H, CmDFR, CmANS, CmCHI and Cm3GT in these cultivars. RT-PCR and qRT-PCR analyses showed that CmF3'H was the most important enzyme required for cyanidin biosynthsis. To rebuild the delphinidin pathway, we downregulated CmF3'H using RNAi and overexpressed the Senecio cruentus F3'5'H (PCFH gene in chrysanthemum. The resultant chrysanthemum demonstrated a significantly increased content of cyanidin and brighter red flower petals but did not accumulate delphinidin. These results indicated that CmF3'H in chrysanthemum is important for anthocyanin accumulation, and Senecio cruentus F3'5'H only exhibited F3'H activity in chrysanthemum but did not rebuild the delphinidin pathway to form blue flower chrysanthemum.

  16. Flower colour modification of chrysanthemum by suppression of F3'H and overexpression of the exogenous Senecio cruentus F3'5'H gene.

    Science.gov (United States)

    He, Huang; Ke, Hu; Keting, Han; Qiaoyan, Xiang; Silan, Dai

    2013-01-01

    Chrysanthemum (Chrysanthemum × morifolium) is one of the most important ornamental plants in the world. They are typically used as cut flowers or potted plants. Chrysanthemum can exhibit red, purple, pink, yellow and white flowers, but lack bright red and blue flowers. In this study, we identified two chrysanthemum cultivars, C × morifolium 'LPi' and C × morifolium 'LPu', that only accumulate flavonoids in their ligulate flowers. Next, we isolated seven anthocyanin biosynthesis genes, namely CmCHS, CmF3H, CmF3'H, CmDFR, CmANS, CmCHI and Cm3GT in these cultivars. RT-PCR and qRT-PCR analyses showed that CmF3'H was the most important enzyme required for cyanidin biosynthsis. To rebuild the delphinidin pathway, we downregulated CmF3'H using RNAi and overexpressed the Senecio cruentus F3'5'H (PCFH) gene in chrysanthemum. The resultant chrysanthemum demonstrated a significantly increased content of cyanidin and brighter red flower petals but did not accumulate delphinidin. These results indicated that CmF3'H in chrysanthemum is important for anthocyanin accumulation, and Senecio cruentus F3'5'H only exhibited F3'H activity in chrysanthemum but did not rebuild the delphinidin pathway to form blue flower chrysanthemum.

  17. Proteomics of red and white corolla limbs in petunia reveals a novel function of the anthocyanin regulator ANTHOCYANIN1 in determining flower longevity.

    Science.gov (United States)

    Prinsi, Bhakti; Negri, Alfredo S; Quattrocchio, Francesca M; Koes, Ronald E; Espen, Luca

    2016-01-10

    The Petunia hybrida ANTHOCYANIN1 (AN1) gene encodes a transcription factor that regulates both the expression of genes involved in anthocyanin synthesis and the acidification of the vacuolar lumen in corolla epidermal cells. In this work, the comparison between the red flowers of the R27 line with the white flowers of the isogenic an1 mutant line W225 showed that the AN1 gene has further pleiotropic effects on flavonoid biosynthesis as well as on distant physiological traits. The proteomic profiling showed that the an1 mutation was associated to changes in accumulation of several proteins, affecting both anthocyanin synthesis and primary metabolism. The flavonoid composition study confirmed that the an1 mutation provoked a broad attenuation of the entire flavonoid pathway, probably by indirect biochemical events. Moreover, proteomic changes and variation of biochemical parameters revealed that the an1 mutation induced a delay in the onset of flower senescence in W225, as supported by the enhanced longevity of the W225 flowers in planta and the loss of sensitivity of cut flowers to sugar. This study suggests that AN1 is possibly involved in the perception and/or transduction of ethylene signal during flower senescence. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. Flowering does not decrease vegetative competitiveness of Lolium perenne

    DEFF Research Database (Denmark)

    Thiele, Jan; Bagger Jørgensen, Rikke; Hauser, Thure Pavlo

    2009-01-01

    as reduced flowering could free resources and increase productivity. But if so, less-flowering cultivars might be more competitive and invade natural swards. We tested for costs of sexual reproduction on vegetative propagation and competitiveness of the perennial grass Lolium perenne, one of the most...... treatments were successful in producing clones with largely differing degrees of flowering. However, we found no negative correlation between flowering and vegetative propagation and competitiveness. Early and strongly flowering southern provenances showed less clonal growth and higher mortality, but within...... provenances the response of clone diameter to flowering was positive or neutral. We conclude that investment of resources into flowering has no measurable costs on vegetative propagation and competitiveness of L. perenne. The apparent lack of costs of sexual reproduction could be explained by bet...

  19. Clonal multiplication of guava through softwood cuttings under mist conditions

    International Nuclear Information System (INIS)

    Kareem, A.; Jaskkani, M.J.; Fatima, B.; Sadia, B.

    2012-01-01

    Guava (psidium guajava l.) is a luscious and important tropical fruit crop. the objective of the study was to develop vegetative propagation system to avoid clonal degradation in guava fruit plants. softwood cuttings from five year old gola accession were prepared from the shoot tops of current season growth, measuring 12 cm in length and carrying 2 to 4 nodes. iba and naa (0, 2000, 4000, 6000, 8000 ppm) were selected to treat cuttings for root induction. cuttings were planted under mist conditions by maintaining temperature at 25 degree c and 85% relative humidity for 25 days. maximum survival percentage (92.17%) of plants at transplanting was noted with 4000 ppm concentration followed by 2000 ppm (85.50%). In general iba 4000 ppm concentration performed better as compared to naa for all parameters studied. This study revealed the potential of clonal propagation of guava through softwood cuttings treated with auxins. (author)

  20. Natural variation of the RICE FLOWERING LOCUS T 1 contributes to flowering time divergence in rice.

    Directory of Open Access Journals (Sweden)

    Eri Ogiso-Tanaka

    Full Text Available In rice (Oryza sativa L., there is a diversity in flowering time that is strictly genetically regulated. Some indica cultivars show extremely late flowering under long-day conditions, but little is known about the gene(s involved. Here, we demonstrate that functional defects in the florigen gene RFT1 are the main cause of late flowering in an indica cultivar, Nona Bokra. Mapping and complementation studies revealed that sequence polymorphisms in the RFT1 regulatory and coding regions are likely to cause late flowering under long-day conditions. We detected polymorphisms in the promoter region that lead to reduced expression levels of RFT1. We also identified an amino acid substitution (E105K that leads to a functional defect in Nona Bokra RFT1. Sequencing of the RFT1 region in rice accessions from a global collection showed that the E105K mutation is found only in indica, and indicated a strong association between the RFT1 haplotype and extremely late flowering in a functional Hd1 background. Furthermore, SNPs in the regulatory region of RFT1 and the E105K substitution in 1,397 accessions show strong linkage disequilibrium with a flowering time-associated SNP. Although the defective E105K allele of RFT1 (but not of another florigen gene, Hd3a is found in many cultivars, relative rate tests revealed no evidence for differential rate of evolution of these genes. The ratios of nonsynonymous to synonymous substitutions suggest that the E105K mutation resulting in the defect in RFT1 occurred relatively recently. These findings indicate that natural mutations in RFT1 provide flowering time divergence under long-day conditions.

  1. Flower symbolism and the cult of relics in medieval Serbia

    Directory of Open Access Journals (Sweden)

    Popović Danica

    2008-01-01

    Full Text Available The Life of archbishop Eustathios I [Jevstatije] (1279-1286, deserving head of the medieval Serbian Church and a saint, is a very interesting source for studying the cult of relics with the Serbs. This is not surprising considering that the Life was penned by one of the most illustrious of Eustathios' successors on the church throne, Daniel II [Danilo], a learned Athonite and unquestionable master of the hagiographie literary genre. In his account of the life of his distinguished predecessor, Daniel describes extensively the events constituting the key stage in the glorification of a saint, namely Eustathios' death and posthumous occurrences at his grave. As most holy men, Eustathios foresaw his own death, and he departed from this world serenely. He was buried, with due honours, in the 'marble grave' he had prepared for himself in the cathedral church of Holy Saviour at Žiča. In keeping with the well-established saint-making process, a few years after the funeral 'extraordinary signs' began to occur at the archbishop's grave, in this particular case, candlelight and a multitude of murmuring voices followed by the miraculous cure of an incurably ill person. These occurrences preceded the great miracle which, to the best of my knowledge, is unparalleled in the medieval Serbian practice of relic veneration. Namely, 'one day they found growing from his marble grave three flowers endowed with wondrous beauty and impossible to liken to anything else. For, indeed, they were not of earthly humidity or of union with flowers that grow from earth; but, o wonder, how a dry stone standing for so long in the church could send forth fragrant flowers, to the renewal of the sanctified one's body'. Flower metaphors occur in the Service to the holy archbishop Eustathios, yet another piece penned by Daniel II, notably in his paraphrases of Psalm 92, 12-14 ('The righteous shall flourish like the palm tree: he shall grow like a cedar in Lebanon. These that be

  2. Is Bumblebee Foraging Efficiency Mediated by Morphological Correspondence to Flowers?

    Directory of Open Access Journals (Sweden)

    Ikumi Dohzono

    2011-01-01

    Full Text Available Preference for certain types of flowers in bee species may be an adaptation for efficient foraging, and they often prefer flowers whose shape fits their mouthparts. However, it is unclear whether such flowers are truly beneficial for them. We address this issue by experimentally measuring foraging efficiency of bumblebees, the volume of sucrose solution consumed over handling time (μL/second, using long-tongued Bombus diversus Smith and short-tongued B. honshuensis Tkalcu that visit Clematis stans Siebold et Zuccarini. The corolla tube length of C. stans decreases during a flowering period, and male flowers are longer than female flowers. Long- and short-tongued bumblebees frequently visited longer and shorter flowers, respectively. Based on these preferences, we hypothesized that bumblebee foraging efficiency is higher when visiting flowers that show a good morphological fit between the proboscis and the corolla tube. Foraging efficiency of bumblebees was estimated using flowers for which nectar quality and quantity were controlled, in an experimental enclosure. We show that 1 the foraging efficiency of B. diversus was enhanced when visiting younger, longer flowers, and that 2 the foraging efficiency of B. honshuensis was higher when visiting shorter female flowers. This suggests that morphological correspondence between insects and flowers is important for insect foraging efficiency. However, in contradiction to our prediction, 3 short-tongued bumblebees B. honshuensis sucked nectar more efficiently when visiting younger, longer flowers, and 4 there was no significant difference in the foraging efficiency of B. diversus between flower sexes. These results suggest that morphological fit between the proboscis and the corolla tube is not a sole determinant of foraging efficiency. Bumblebees may adjust their sucking behavior in response to available rewards, and competition over rewards between bumblebee species might change visitation patterns

  3. Water relations in calla lily flower stems harvested at different opening stages(

    Directory of Open Access Journals (Sweden)

    Thais Silva Sales

    2015-12-01

    Full Text Available Cut flowers are a well established product and require conservation techniques that help keep postharvest quality for marketing. In this context, the objective of this study was to evaluate different opening stages of calla lily (Zantedeschia aethiopica cut stems and their influence on posthaverst. Calla lily stems were harvested in the morning, according to the following opening stages: closed spathe, semi-closed spathe (1/3 open, semi-open spathe (2/3 open and fully open spathe. Once selected and standardized, stems were placed in a controlled room at 21 ± 2 °C and relative humidity of 75 ± 5%, for eight days. The evaluations were conducted daily, observing water pH, commercial quality analysis, width and length of the spathe, fresh weight of stem, water absorption and transpiration. The experimental design was completely randomized, with four treatments (opening stages, five replicates and two stems by plot. The model used was split plot in time, with harvest stages as plots, and evaluation days as subplots. Calla lily harvested at closed spathe and semi-closed spathe (1/3 open, showed spathe opening, although it did not achieve fully spathe expansion, had higher water uptake and hydration of flower stems, and increased water retention capacity by floral tissues until saturation, followed by a period of weight reduction caused by transpiration rates greater than absorption.

  4. Dormancy release and flowering time in Ziziphus jujuba Mill., a "direct flowering" fruit tree, has a facultative requirement for chilling.

    Science.gov (United States)

    Meir, Michal; Ransbotyn, Vanessa; Raveh, Eran; Barak, Simon; Tel-Zur, Noemi; Zaccai, Michele

    2016-03-15

    In deciduous fruit trees, the effect of chilling on flowering has mostly been investigated in the "indirect flowering" group, characterized by a period of rest between flower bud formation and blooming. In the present study, we explored the effects of chilling and chilling deprivation on the flowering of Ziziphus jujuba, a temperate deciduous fruit tree belonging to the "direct flowering" group, in which flower bud differentiation, blooming and fruit development occur after dormancy release, during a single growing season. Dormancy release, vegetative growth and flowering time in Z. jujuba cv. Ben-Li were assessed following several treatments of chilling. Chilling treatments quantitatively decreased the timing of vegetative bud dormancy release, thereby accelerating flowering, but had no effect on the time from dormancy release to flowering. Trees grown at a constant temperature of 25°C, without chilling, broke dormancy and flowered, indicating the facultative character of chilling in this species. We measured the expression of Z. jujuba LFY and AP1 homologues (ZjLFY and ZjAP1). Chilling decreased ZjLFY expression in dormant vegetative buds but had no effect on ZjAP1expression, which reached peak expression before dormancy release and at anthesis. In conclusion, chilling is not obligatory for dormancy release of Z. jujuba cv. Ben-Li vegetative buds. However, the exposure to chilling during dormancy does accelerate vegetative bud dormancy release and flowering. Copyright © 2016 Elsevier GmbH. All rights reserved.

  5. Testing hypotheses for excess flower production and low fruit-to-flower ratios in a pollinating seed-consuming mutualism

    Science.gov (United States)

    Holland, J. Nathaniel; Bronstein, Judith L.; DeAngelis, Donald L.

    2004-01-01

    Pollinator attraction, pollen limitation, resource limitation, pollen donation and selective fruit abortion have all been proposed as processes explaining why hermaphroditic plants commonly produce many more flowers than mature fruit. We conducted a series of experiments in Arizona to investigate low fruit-to-flower ratios in senita cacti, which rely exclusively on pollinating seed-consumers. Selective abortion of fruit based on seed predators is of particular interest in this case because plants relying on pollinating seed-consumers are predicted to have such a mechanism to minimize seed loss. Pollinator attraction and pollen dispersal increased with flower number, but fruit set did not, refuting the hypothesis that excess flowers increase fruit set by attracting more pollinators. Fruit set of natural- and hand-pollinated flowers were not different, supporting the resource, rather than pollen, limitation hypothesis. Senita did abort fruit, but not selectively based on pollen quantity, pollen donors, or seed predators. Collectively, these results are consistent with sex allocation theory in that resource allocation to excess flower production can increase pollen dispersal and the male fitness function of flowers, but consequently results in reduced resources available for fruit set. Inconsistent with sex allocation theory, however, fruit production and the female fitness function of flowers may actually increase with flower production. This is because excess flower production lowers pollinator-to-flower ratios and results in fruit abortion, both of which limit the abundance and hence oviposition rates, of pre-dispersal seed predators.

  6. What flowers do we like? The influence of shape and color on the rating of flower beauty

    Directory of Open Access Journals (Sweden)

    Martin Hůla

    2016-06-01

    Full Text Available There is no doubt that people find flowers beautiful. Surprisingly, we know very little about the actual properties which make flowers so appealing to humans. Although the evolutionary aesthetics provides some theories concerning generally preferred flower traits, empirical evidence is largely missing. In this study, we used an online survey in which residents of the Czech Republic (n = 2006 rated the perceived beauty of 52 flower stimuli of diverse shapes and colors. Colored flowers were preferred over their uncolored versions. When controlling for flower shape, we found an unequal preference for different flower colors, blue being the most and yellow the least preferred. In the overall assessment of beauty, shape was more important than color. Prototypical flowers, i.e., radially symmetrical flowers with low complexity, were rated as the most beautiful. We also found a positive effect of sharp flower contours and blue color on the overall rating of flower beauty. The results may serve as a basis for further studies in some areas of the people-plant interaction research.

  7. What flowers do we like? The influence of shape and color on the rating of flower beauty

    Science.gov (United States)

    Flegr, Jaroslav

    2016-01-01

    There is no doubt that people find flowers beautiful. Surprisingly, we know very little about the actual properties which make flowers so appealing to humans. Although the evolutionary aesthetics provides some theories concerning generally preferred flower traits, empirical evidence is largely missing. In this study, we used an online survey in which residents of the Czech Republic (n = 2006) rated the perceived beauty of 52 flower stimuli of diverse shapes and colors. Colored flowers were preferred over their uncolored versions. When controlling for flower shape, we found an unequal preference for different flower colors, blue being the most and yellow the least preferred. In the overall assessment of beauty, shape was more important than color. Prototypical flowers, i.e., radially symmetrical flowers with low complexity, were rated as the most beautiful. We also found a positive effect of sharp flower contours and blue color on the overall rating of flower beauty. The results may serve as a basis for further studies in some areas of the people-plant interaction research. PMID:27330863

  8. Sugars, the clock and transition to flowering

    Directory of Open Access Journals (Sweden)

    Mohammad Reza eBolouri Moghaddam

    2013-02-01

    Full Text Available Sugars do not only act as source of energy, but they also act as signals in plants. This mini review summarizes the emerging links between sucrose-mediated signaling and the cellular networks involved in flowering time control and defense. Cross-talks with gibberellin (GA and jasmonate (JA signaling pathways are highlighted. The circadian clock fulfills a crucial role at the heart of cellular networks and the bilateral relation between sugar signaling and the clock is discussed. It is proposed that important factors controlling plant growth (DELLAs, PIFs, invertases and trehalose- 6-phosphate or T6P might fulfill central roles in the transition to flowering as well. The emerging concept of ‘sweet immunity’, modulated by the clock, might at least partly rely on a sucrose-specific signaling pathway that needs further exploration.

  9. Deterministic diffusion in flower-shaped billiards.

    Science.gov (United States)

    Harayama, Takahisa; Klages, Rainer; Gaspard, Pierre

    2002-08-01

    We propose a flower-shaped billiard in order to study the irregular parameter dependence of chaotic normal diffusion. Our model is an open system consisting of periodically distributed obstacles in the shape of a flower, and it is strongly chaotic for almost all parameter values. We compute the parameter dependent diffusion coefficient of this model from computer simulations and analyze its functional form using different schemes, all generalizing the simple random walk approximation of Machta and Zwanzig. The improved methods we use are based either on heuristic higher-order corrections to the simple random walk model, on lattice gas simulation methods, or they start from a suitable Green-Kubo formula for diffusion. We show that dynamical correlations, or memory effects, are of crucial importance in reproducing the precise parameter dependence of the diffusion coefficent.

  10. Flower-petal mode converter for NLC

    International Nuclear Information System (INIS)

    Hoag, H.A.; Tantawi, S.G.; Callin, R.; Deruyter, H.; Farkas, Z.D.; Ko, K.; Kroll, N.; Lavine, T.L.; Menegat, A.; Vlieks, A.E.

    1993-01-01

    It is important to minimize power loss in the waveguide system connecting klystron, pulse-compressor, and accelerator in an X-Band NLC. However, existing designs of klystron output cavity circuits and accelerator input couplers utilize rectangular waveguide which has relatively high transmission loss. It is therefore necessary to convert to and from the low-loss mode in circulator waveguide at each end of the system. A description is given of development work on high-power, high-vacuum open-quote flower-petal close-quote transducers, which convert the TE 10 mode in rectangular guide to the TE 01 mode in circular guide. A three-port modification of the flower petal device, which can be used as either a power combiner at the klystron or a power divider at the accelerator is also described

  11. Flower-petal mode converter for NLC

    International Nuclear Information System (INIS)

    Hoag, H.A.; Tantawi, S.G.; Callin, R.

    1993-04-01

    It is important to minimize power loss in the waveguide system connecting klystron, pulse-compressor, and accelerator in an X-Band NLC. However, existing designs of klystron output cavity circuits and accelerator input couplers utilize rectangular waveguide which has relatively high transmission loss. It is therefore necessary to convert to and from the low-loss mode in circular waveguide at each end of the system. A description is given of development work on high-power, high-vacuum 'flower-petal' transducers, which convert the TE 10 mode in rectangular guide to the TE 01 mode in circular guide. A three-port modification of the flower petal device, which can be used as either a power combiner at the klystron or a power divider at the accelerator is also described

  12. Flowering and fruiting intensity of small - sized tomato, due to the regulation of the quantity of light reaching the plant top

    Directory of Open Access Journals (Sweden)

    Renata Dobromilska

    2012-12-01

    Full Text Available The experiments were carried out in 2001-2003 in a high unheated plastic tunnel. The influence of reduction of leaves and application of reflection matter on flowering and fruiting of small-sized tomato was studied. The experiment focused on the following factors: methods of increasing the amount of light in plant tops (reflection matter, cutting leaves, reflection matter + cutting leaves and cultivars of small sized tomato ('Conchita F1', 'Picolino F1'. The cutting of leaves and reflection matter mulching resulted in the increase of the intensity of radiation reaching plant tops and the reflected radiation. The above measures increasing the light access to plant tops significantly increased the number of flowers, germs and fruits. The reflection matter mulching along with cutting leaves resulted in the substantial growth of early yield of small-sized tomato. The 'Conchita F1' cultivar set a relatively greater number of flowers and fruits on a plant and in cluster than 'Picolino F1'.

  13. Selection of sugarcane mutants with resistance to red-rot disease, water-logging and delayed/non-flowering

    Energy Technology Data Exchange (ETDEWEB)

    Shaikh, M A.Q.; Shamsuzzaman, K M; Majid, M A; Howlider, M A.R.; Islam, M M [Institute of Nuclear Agriculture, Mymensingh (Bangladesh)

    1997-07-01

    Three batches of sugarcane cuttings were irradiated with gamma-rays in three different years for isolating mutants for delayed flowering, resistance to red-rot disease and water-logged conditions. In the first batch cuttings of cvs. `Isd-2/54`, `Latarijaba` and `Nagarbari` were irradiated with 20-40 Gy gamma-rays. In M{sub 1} V{sub 4} generation, 2,114 canes selected from inoculated M{sub 1}V{sub 3} generation, were re-inoculated with red-hot pathogen. Of these, four canes were resistant and 64 canes were moderately resistant to the disease. The M{sub 1}V{sub 5} generation of the selected clones was grown at two locations for selection. In the second batch, cuttings of cvs. `Isd-16`, `Isd-2/54`, `Nagarbari` and `Latarijaba` were irradiated with 20-60 Gy gamma-rays. The irradiated material was divided into three lots and each lot was put under different selection pressure. For isolating mutants with resistance to red-rot disease, 15,104 canes were artificially inoculated in the M{sub 1}V{sub 3}. Among these, one clone was resistant and 16 were moderately resistant. Of the 10,000 M{sub 1}V{sub 3} canes, grown under water-logged condition and selected for greenness of leaf at harvest, 38 canes were reasonably tolerant. For selecting late flowering mutants, about 8,500 canes were left in a field for a month after normal harvest; of these five showed late flowering. These mutants were grown for further selection in the M{sub 1}V{sub 4}. To screen out non-flowering canes, cvs. `I-291/87`, an early flowering types, and `I525/85`, a late flowering type were irradiated with 20-40 Gy gamma rays. M{sub 1}V{sub 3} generation has been grown in the field. (author). 13 refs, 6 tabs.

  14. New Service Development in Flower Retail

    OpenAIRE

    Abdigali, Alikhan

    2010-01-01

    My research will focus on the practical dimension of new service development in flower retail in Kazakhstan. Our group project, the business plan, investigated the issue from an entrepreneur perspective without going into detail in theoretical part. I will try to come up with a set of recommendations to entrepreneurs who want to develop a customer oriented service, based on theories drawn from service development literature. The product and service mix development is a difficult task, and I h...

  15. Plants and colour: Flowers and pollination

    Science.gov (United States)

    Miller, Renee; Owens, Simon J.; Rørslett, Bjørn

    2011-03-01

    While there is a range of colours found in plants the predominant colour is green. Pigments in plants have several roles e.g. photosynthesis and signalling. If colour is to be used as a signal then it must stand out from green. However, one should be aware that there are also coloured compounds where we have not yet fully investigated the role of colour in their functions—they may have roles in, for example, defence or heat exchange. In this paper, we will describe the basic chemistry of the major pigments found in plants and especially floral pigments. We will then discuss their locations in parts of the flower (such as sepals, petals, pollen and nectar), the cells in which they are found and their sub-cellular locations. Floral pigments have a large role to play in pollination of flowers by animals. They can and are modified in many ways during the development of flowers in nature, for example, at emergence and post-pollination. There are a range of biochemical mechanisms of colour change both within flowers and in isolated pigments. Some of the factors influencing colour are temperature, co-pigments, pH, metals, sugars, anthocyanin stacking and cell shape. There is a renewed interest in analysing floral pigments and how they are modified partly because of advances in recombinant DNA technologies, but also because of pollinators and their significance to biodiversity and for evolutionary studies. There is continued strong interest from the horticultural industry for the introduction of new colours e.g. the blue rose and for the exploitation of natural dyes. Funding in this area may impact future research in a potentially beneficial way but it must not deflect us from science-based conservation.

  16. Flower Retail in Kazakhstan: Business Plan

    OpenAIRE

    Talgat, Baidauletov; Alikhan, Abdigali

    2010-01-01

    Executive summary Flower retail industry in Kazakhstan is estimated to be around USD $80-100 million. Current market environment allows for entrance of a new player, focused on highly lucrative part segment of the market. Our business will differentiate itself by offering exceptional level of service while retaining competitive market prices. This business plan describes a way to turn USD $204,000 into a business with a turnover above $ 7 million in four years by capturing premium 10% o...

  17. Effect of gamma irradiation and its convergent treatment for control of postharvest Botrytis cinerea of cut roses

    International Nuclear Information System (INIS)

    Chu, Eun-Hee; Shin, Eun-Jung; Park, Hae-Jun; Jeong, Rae-Dong

    2015-01-01

    Postharvest diseases cause considerable losses to harvested crops. Among them, gray mold (Botrytis cinerea) is a major problem of exporting to cut rose flowers into Korea. Irradiation treatment is an alternative to phytosanitary purposes and a useful nonchemical approach to the control of postharvest diseases. Gamma irradiation was evaluated for its in vitro and in vivo antifungal activity against B. cinerea on cut rose varieties, ‘Shooting Star’ and ‘Babe’. The irradiating dose required to reduce the population by 90%, D 10 , was 0.99 kGy. Gamma irradiation showed complete inhibition of spore germination and mycelial growth of B. cinerea, especially 4.0 kGy in vitro. Antifungal activity of gamma irradiation on rose B. cinerea is a dose-dependent manner. A significant phytotoxicity such as bent neck in cut rose quality was shown from gamma irradiation at over 0.4 kGy (p<0.05) in both varieties. Although there is no significant difference in both varieties for fresh weight, in the case of flower rate, ‘Babe’ shows more sensitivity than ‘Shooting Star’. In vivo assays demonstrated that established doses in in vitro, over 4 kGy, could completely inactive fungal pathogens, but such high doses can cause severe flowers damage. Thus, to eliminate negative impact on their quality, gamma irradiation was evaluated at lower doses in combination with an eco-friendly chemical, sodium dichloroisocyanurate (NaDCC) to examine the inhibition of B. cinerea. Intriguingly, only the combined treatment with 0.2 kGy of gamma irradiation and 70 ppm of NaDCC exhibited significant synergistic antifungal activity against blue mold decay in both varieties. Together, these results suggest that a synergistic effect of the combined treatment with gamma irradiation and NaDCC can be efficiently used to control the postharvest diseases in cut rose flowers, and will provide a promising technology for horticulture products for exportation. - Highlights: • Gamma irradiation and Na

  18. Regge cuts in inclusive reactions

    International Nuclear Information System (INIS)

    Paige, F.E.; Trueman, T.L.

    1975-01-01

    The contribution of Regge cuts to single-particle inclusive processes is analyzed using the techniques of Gribov. The dependence of these contributions on the polarization state of the target is emphasized. A general formula is obtained and certain contributions to it are calculated. It is not possible, however, to reduce this to a simple, powerful formula expressing the total cut contribution in terms of other measurable quantities, as can be done for the cut contribution to the total cross section. The reasons for this are discussed in detail. The single-particle intermediate states, analogous to the absorption model for elastic scattering, are explicitly calculated as an illustration

  19. Laser cutting of Kevlar laminates

    Energy Technology Data Exchange (ETDEWEB)

    VanCleave, R.A.

    1977-09-01

    An investigation has been conducted of the use of laser energy for cutting contours, diameters, and holes in flat and shaped Kevlar 49 fiber-reinforced epoxy laminates as an alternate to conventional machining. The investigation has shown that flat laminates 6.35 mm thick may be cut without backup by using a high-powered (1000-watt) continuous wave CO/sub 2/ laser at high feedrates (33.87 mm per second). The cut produced was free of the burrs and delaminations resulting from conventional machining methods without intimate contact backup. In addition, the process cycle time was greatly reduced.

  20. Flowers of Çoruh Valley

    Directory of Open Access Journals (Sweden)

    Ramazan Çakmakçı

    2018-01-01

    Full Text Available Coruh valley has an important biological diversity in term of plants, flora-fauna, wildlife and ecosystems. These regions contain the landraces, wild and weedy relatives, other wild, herbaceous and flowering trees, herbaceous flowering plants, medicinal and aromatic and flowering and ornamental shrubs plants species which are especially economically important plant for floriculture, eco-tourism, botanical tourism and nature tourism. Many important medicinal and aromatic and ornamental plants species are found in this region and naturally grow. It is considered that Acantholimon, Achillea, Alkanna, Allium, Amygdalus, Angelica, Anemone, Anthemis, Arabis, Arctium, Artemisia, Asparagus, Asperula, Astragalus, Calamintha, Calendula, Calutea, Campanula, Capparis, Cardamine, Centaurea, Cephalanthera, Cephalaria, Chelidonium, Chenopodium, Chysanthemum, Colchicum, Consolida, Coriandrum, Cornus, Coronilla, Cerasus, Cotoneaster, Crataegus, Crocus, Cyclamen, Dactylorhiza, Digitalis, Dianthus, Draba, Echinops, Equisetum, Ferula, Filipendula, Fritillaria, Fumaria, Gagea, Galanthus, Galium, Genista, Gentiana, Geranium, Geum, Gladiolus, Glychirrza, Helichrysum, Hesperis, Hypericum, İnula, İris, Isatis, Juniperus, Lilium, Linaria, Linum, lysimachia, Malus, Malva, Marrubium, Melissa, Mentha, Micromeria, Morina, Muscari, Mysotis, Narcissus, Neotchichatchewia, Nepeta, Onobrychis, Orchis, Ornithogalum, Origanum, Paeonia, Papaver, Pedicularis, Peganum, Phelypaea, Platanthera, Plantago, Pilosella, Pelargonium, Potentilla, Polygonum, Polygala, Primula, Punica, Prunus, Pyrus, Ranunculus, Rhamnus, Rhododendron, Rhus, Rosa, Rubia, Rubus, Rumex, Salvia, Sambucus, Satureja, Scilla, Scorzonera, Scutellaria, Sedum, Sempervivum, Sideritis, Sophora, Sorbus, Stachys, Tanecetum, Teucrium, Thymus, Trigonella, Tulipa, Tussilago, Uechtriitzia, Vaccinium, Verbascum, Verbena, Veronica, Viburnum and Ziziphora species commonly found in the region may be may be evaluated economically.

  1. Is the flower fluorescence relevant in biocommunication?

    Science.gov (United States)

    Iriel, Analía; Lagorio, María Gabriela

    2010-10-01

    Flower fluorescence has been previously proposed as a potential visual signal to attract pollinators. In this work, this point was addressed by quantitatively measuring the fluorescence quantum yield ( Φ f) for flowers of Bellis perennis (white, yellow, pink, and purple), Ornithogalum thyrsoides (petals and ovaries), Limonium sinuatum (white and yellow), Lampranthus productus (yellow), Petunia nyctaginiflora (white), Bougainvillea spectabilis (white and yellow), Antirrhinum majus (white and yellow), Eustoma grandiflorum (white and blue), Citrus aurantium (petals and stigma), and Portulaca grandiflora (yellow). The highest values were obtained for the ovaries of O. thyrsoides ( Φ f = 0.030) and for Citrus aurantium petals ( Φ f = 0.014) and stigma ( Φ f = 0.013). Emitted photons as fluorescence were compared with reflected photons. It was concluded that the fluorescence emission is negligible compared to the reflected light, even for the most fluorescent samples, and it may not be considered as an optical signal in biocommunication. The work was complemented with the calculation of quantum catches for each studied flower species to describe the visual sensitization of eye photoreceptors.

  2. Carbohydrate Status of Tulip Bulbs during Cold-Induced Flower Stalk Elongation and Flowering.

    Science.gov (United States)

    Lambrechts, H.; Rook, F.; Kolloffel, C.

    1994-01-01

    The effect of a cold treatment on the carbohydrate status of the scales and flower stalk of Tulipa gesneriana L. cv Apeldoorn bulbs during growth after planting was studied and compared with bulbs not given cold treatment. Bulbs were stored dry for 12 weeks at 5[deg]C (precooled) or 17[deg]C (noncooled). Only the 5[deg]C treatment led to rapid flower stalk elongation and flowering following planting at higher temperatures. Precooling enhanced mobilization of starch, fructans, and sucrose in the scales. The cold-stimulated starch breakdown was initially accompanied by increased [alpha]-amylase activity per scale. In noncooled bulbs, [alpha]-amylase activity slightly decreased or remained more or less constant. Cold-induced flower stalk elongation was partially accompanied by a decrease in the sucrose content and an increase in the glucose content and invertase activity per g dry weight. The starch content in internodes initially decreased and subsequently increased; [alpha]-amylase activity per g dry weight of the lowermost internode showed a peak pattern during starch breakdown and increased thereafter. The internodes of noncooled bulbs, on the contrary, accumulated sucrose. Their glucose content and invertase activity per g dry weight remained low. Starch breakdown was not found and [alpha]-amylase activity per g dry weight of the lowermost internode remained at a low level. Precooling of tulip bulbs thus favors reserve mobilization in the scales and flower stalk and glucose accumulation in the elongating internodes. PMID:12232100

  3. Preventive treatment of calcium oxalate crystal deposition with immortal flowers.

    Science.gov (United States)

    Orhan, Nilüfer; Onaran, Metin; Şen, İlker; Işık Gönül, İpek; Aslan, Mustafa

    2015-04-02

    A number of medicinal plants are used for their diuretic, urolithiatic and anti-inflammatory effects on urinary system problems in Turkey and the most common traditional remedy for kidney stones is the tea of immortal flowers. The aim of this study is to evaluate the preventive effect of infusions prepared from capitulums of Helichrysum graveolens (M.Bieb.) Sweet (HG) and Helichrysum stoechas ssp. barellieri (Ten.) Nyman (HS) on formation of kidney stones. Sodium oxalate (Ox-70mg/kg intraperitoneally) was used to induce kidney stones on Wistar albino rats. At the same time, two different doses of the plant extracts (HG: 62.5 and 125mg/kg; HS: 78 and 156mg/kg) were dissolved in the drinking water and administered to animals for 5 days. Potassium citrate was used as positive control in the experiments. During the experiment, water intake, urine volume and body weights of the animals were recorded. At the end of the experiments, liver, kidney and body weights of the animals were determined; biochemical analysis were conducted on urine, blood and plasma samples. Histopathological changes in kidney tissues were examined and statistical analysis were evaluated. HS extract showed the highest preventive effect at 156mg/kg dose (stone formation score: 1.16), whereas a number of kidney stones were maximum in sodium oxalate group (stone formation score: 2.66). Helichrysum extracts decreased urine oxalate and uric acid levels and increased citrate levels significantly. In addition, Helichrysum extracts regulated the negative changes in biochemical and hematological parameters occurred after Ox injection. We conclude that Helichrysum extracts could reduce the formation and growth of kidney stones in Ox-induced urolithiasis and can be beneficial for patients with recurrent stones. In addition, this is the first study on the preventive effect of immortal flowers. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  4. Effect of Cut Quality on Hybrid Laser Arc Welding of Thick Section Steels

    Science.gov (United States)

    Farrokhi, F.; Nielsen, S. E.; Schmidt, R. H.; Pedersen, S. S.; Kristiansen, M.

    From an industrial point of view, in a laser cutting-welding production chain, it is of great importance to know the influence of the attainable laser cut quality on the subsequent hybrid laser arc welding process. Many studies have been carried out in the literature to obtain lower surface roughness values on the laser cut edge. However, in practice, the cost and reliability of the cutting process is crucial and it does not always comply with obtaining the highest surface quality. In this study, a number of experiments on 25 mm steel plates were carried out to evaluate the influence of cut surface quality on the final quality of the subsequent hybrid laser welded joints. The different cut surfaces were obtained by different industrial cutting methods including laser cutting, abrasive water cutting, plasma cutting, and milling. It was found that the mentioned cutting methods could be used as preparation processes for the subsequent hybrid laser arc welding. However, cut quality could determine the choice of process parameters of the following hybrid laser arc welding.

  5. Regge cuts: A general approach

    International Nuclear Information System (INIS)

    Weis, J.H.

    1976-01-01

    We discuss an approach to the calculation of Regge-cut contributions to scattering amplitudes which relies only on the general structure of the physical Reggeon couplings. It thus allows a unified treatment of disparate models [such as the Feynman (Mandelstam) graph model and the dual model] and a general derivation of the Abramovskii--Gribov--Kancheli (AGK) rules. The structure of the Reggeon couplings is expressed through integrals over complex helicity. The Regge-cut amplitude can then be obtained, and its s-channel discontinuity, taken; there results a direct derivation of a set of ''cutting rules'' which express the total discontinuity as a sum of terms involving various discontinuities of the Reggeon couplings. The equality of these discontinuities follows directly if the singularities in complex helicity are the usual ones. Thus the AGK rules are seen to be quite model independent. Here we study in detail the simplest example: the Reggeon-particle cut in the four-particle amplitude

  6. Materials selection for cutting tools

    International Nuclear Information System (INIS)

    Burkhis, Adel M.

    2008-01-01

    The selection of proper tool steel for a given application is a difficult task. So; the most important selection factors in choosing cutting tool materials are based on their tool material requirements, cutting tool design and service conditions which is mainly considered as functional requirements. The processability requirements concerns in heat treat ability of the material tool. The classification of these tool materials were discussed with their properties requirement and percent of alloying element which is added to give best properties with a little increase in cost that highly appear in comparison of the selection. The cutting tool materials were evaluated based on two cases; The first was in case of rough surface; the high speed steels is the best material and the other was the ceramic material is the highest performance in cutting of soft or high rate of metal removal. (author)

  7. Study on the effect of innovative leaching solvent on the oil removal for oily drilling cuttings

    Science.gov (United States)

    Li, Long; Ma, Cha; Hao, Weiwei; Li, Mu; Huang, Zhao; Liu, Yushuang

    2018-02-01

    A new type of leaching solvent for oily drilling cuttings was developed, and the effect of leaching solvent on the oil removal for oily cuttings was investigated. The results indicated that the leaching solvent had good capacity of oil removal for oily cuttings, and the oil content of treated cuttings is less than 0.6%. The leaching solvent could be separated from the oil phase through distillation, and the recyclable solvent could be reused to treat other cuttings. Moreover, oil resources adsorbed on the oily cuttings could be recycled and reused to prepare new drilling fluids, so the drilling cost could be reduced greatly. As a result, the leaching solvent could treat the oily cuttings effectively, and recycle and reuse oil resources, and thus produce great economic benefits. It can play an essential role in safe drilling jobs and improvement of drilling efficiency in the future.

  8. Seismic characteristics and identification of negative flower structures, positive flower structures, and positive structural inversion

    Energy Technology Data Exchange (ETDEWEB)

    Harding, T.P.

    1985-04-01

    Negative and positive flower structures and positive inverted structures imply specific modes of formation, and their distinctive characteristics make them important criteria for the identification of certain structural styles. A negative flower structure from the Andaman Sea consists of a shallow synform bounded by upward-spreading strands of a wrench fault that have mostly normal separations. Paralleling monoclines and oblique, en echelon normal faults flank the divergent wrench fault. A positive flower structure from the Ardmore basin, Oklahoma, consists of a shallow antiform displaced by the upward diverging strands of a wrench fault that have mostly reverse separations. En echelon folds are present on either side of this convergent wrench fault. Positive structural inversion at the Rambutan oil field, South Sumatra basin, has formed a shallow anticlinorium and has partly uplifted the underlying graben. Deeper fault segments bounding the graben have retained their normal fault profiles, but at shallow levels some of these faults have reverse separations.

  9. Laser Cutting Tool Path Optimization

    OpenAIRE

    Dewil, Reginald; Cattrysse, Dirk; Vansteenwegen, Pieter

    2011-01-01

    Given a set of irregular parts nested on a metal sheet, minimize the total non- cutting time for the cutter head, cutting all the required elements and returning to the starting location. The problem is modeled as a generalized traveling sales- person problem with special precedence constraints. An initial feasible solution is generated and improved by local moves embedded in a tabu search framework. The proposed algorithm shows promising results in comparison with a commercial...

  10. Economic technology of laser cutting

    Science.gov (United States)

    Fedin, Alexander V.; Shilov, Igor V.; Vassiliev, Vladimir V.; Malov, Dmitri V.; Peskov, Vladimir N.

    2000-02-01

    The laser cutting of color metals and alloys by a thickness more than 2 mm has significant difficulties due to high reflective ability and large thermal conduction. We made it possible to raise energy efficiency and quality of laser cutting by using a laser processing system (LPS) consisting both of the YAG:Nd laser with passive Q-switching on base of LiF:F2- crystals and the CO2 laser. A distinctive feature of the LPS is that the radiation of different lasers incorporated in a coaxial beam has simultaneously high level of peak power (more than 400 kW in a TEM00 mode) and significant level of average power (up to 800 W in a TEM01 mode of the CO2 laser). The application of combined radiation for cutting of an aluminum alloy of D16 type made it possible to decrease the cutting energy threshold in 1.7 times, to increase depth of treatment from 2 up to 4 mm, and velocity from 0.015 up to 0.7 m/min, and also to eliminate application of absorptive coatings. At cutting of steels the velocity of treatment was doubled, and also an oxygen flow was eliminated from the technological process and replaced by the air. The obtained raise of energy efficiency and quality of cutting is explained by an essential size reducing of a formed penetration channel and by the shifting of a thermal cutting mode from melting to evaporation. The evaluation of interaction efficiency of a combined radiation was produced on the basis of non-stationary thermal-hydrodynamic model of a heating source moving as in the cutting direction, and also into the depth of material.

  11. Postharvest quality of cut roses following electron-beam irradiation

    International Nuclear Information System (INIS)

    Chang, A.Y.; Gladon, R.J.; Gleason, M.L.; Parker, S.K.; Agnew, N.H.; Olson, D.G.

    1997-01-01

    Cut Rosa x hybrida L. 'Royalty' flowers were used to determine the efficacy of electron-beam irradiation for increasing postharvest quality and decreasing petal infection by Botrytis cinerea Pers. In an experiment for determining the injury threshold, roses received electron-beam irradiation of 0, 0.5, 1, 2, and 4 kGy. Irradiation dosages greater than or equal to 4 kGy caused necrosis on petal tissue and decreased postharvest life at 20 degrees C. In a second experiment to evaluate postharvest quality, roses were irradiated at 0, 0.25, 0.5, 0.75, and 1 kGy. Dosages of 0.25 and 0.5 kGy slowed the rate of flower bud opening for 2 days but did not decrease postharvest quality when compared with nonirradiated roses. Roses that received irradiation dosages of 0.75 and 1 kGy showed unacceptable quality. In a third experiment, roses that had or had not been inoculated with B. cinerea were irradiated at 0, 0.25, 0.5, and 0.75 kGy. Irradiation did not control B. cinerea populations, and rose quality decreased as dosage increased. In a fourth experiment to determine the effect of irradiation on B. cinerea, conidia on water-agar plates exposed to dosages less than or equal to 1, 2, and 4 kGy germinated at rates of approximately 90%, 33%, and 2%, respectively, within 24 h

  12. TiO2 micro-flowers composed of nanotubes and their application to dye-sensitized solar cells

    Science.gov (United States)

    Kim, Woong-Rae; Park, Hun; Choi, Won-Youl

    2014-02-01

    TiO2 micro-flowers were made to bloom on Ti foil by the anodic oxidation of Ti-protruding dots with a cylindrical shape. Arrays of the Ti-protruding dots were prepared by photolithography, which consisted of coating the photoresists, attaching a patterned mask, illuminating with UV light, etching the Ti surface by reactive ion etching (RIE), and stripping the photoresist on the Ti foil. The procedure for the blooming of the TiO2 micro-flowers was analyzed by field emission scanning electron microscopy (FESEM) as the anodizing time was increased. Photoelectrodes of dye-sensitized solar cells (DSCs) were fabricated using TiO2 micro-flowers. Bare TiO2 nanotube arrays were used for reference samples. The short-circuit current ( J sc) and the power conversion efficiency of the DSCs based on the TiO2 micro-flowers were 4.340 mA/cm2 and 1.517%, respectively. These values of DSCs based on TiO2 micro-flowers were higher than those of bare samples. The TiO2 micro-flowers had a larger surface area for dye adsorption compared to bare TiO2 nanotube arrays, resulting in improved J sc characteristics. The structure of the TiO2 micro-flowers allowed it to adsorb dyes very effectively, also demonstrating the potential to achieve higher power conversion efficiency levels for DSCs compared to a bare TiO2 nanotube array structure and the conventional TiO2 nanoparticle structure.

  13. Yield in almond is related more to the abundance of flowers than the relative number of flowers that set fruit

    Directory of Open Access Journals (Sweden)

    Sergio Tombesi

    2016-11-01

    Full Text Available Almond tree yield is a function of the number of flowers on a tree and the percentage of flowers that set fruit. Almonds are borne on spurs (short proleptic shoots that can have both leaves and flowers. Almond tree spur dynamics research has documented that previous year spur leaf area is a predictive parameter for year-to-year spur survival, spur flowering and to a lesser extent spur fruiting, while previous year fruit bearing has a negative impact on subsequent year flowering. However, a question remained about whether yields are more dependent on flower numbers or relative fruit set of the flowers that are present. The aim of the present work was to compare the importance of flower abundance with that of relative fruit set in determining the productivity of a population of tagged spurs in almond trees over a 6-year period. Overall tree yield among years was more sensitive to total number of flowers on a tree rather than relative fruit set. These results emphasize the importance of maintaining large populations of healthy flowering spurs for sustained high production in almond orchards.

  14. Twice cutting method reduces tibial cutting error in unicompartmental knee arthroplasty.

    Science.gov (United States)

    Inui, Hiroshi; Taketomi, Shuji; Yamagami, Ryota; Sanada, Takaki; Tanaka, Sakae

    2016-01-01

    Bone cutting error can be one of the causes of malalignment in unicompartmental knee arthroplasty (UKA). The amount of cutting error in total knee arthroplasty has been reported. However, none have investigated cutting error in UKA. The purpose of this study was to reveal the amount of cutting error in UKA when open cutting guide was used and clarify whether cutting the tibia horizontally twice using the same cutting guide reduced the cutting errors in UKA. We measured the alignment of the tibial cutting guides, the first-cut cutting surfaces and the second cut cutting surfaces using the navigation system in 50 UKAs. Cutting error was defined as the angular difference between the cutting guide and cutting surface. The mean absolute first-cut cutting error was 1.9° (1.1° varus) in the coronal plane and 1.1° (0.6° anterior slope) in the sagittal plane, whereas the mean absolute second-cut cutting error was 1.1° (0.6° varus) in the coronal plane and 1.1° (0.4° anterior slope) in the sagittal plane. Cutting the tibia horizontally twice reduced the cutting errors in the coronal plane significantly (Pcutting the tibia horizontally twice using the same cutting guide reduced cutting error in the coronal plane. Copyright © 2014 Elsevier B.V. All rights reserved.

  15. Cutting efficiency of diamond burs operated with electric high-speed dental handpiece on zirconia.

    Science.gov (United States)

    Nakamura, Keisuke; Katsuda, Yusuke; Ankyu, Shuhei; Harada, Akio; Tenkumo, Taichi; Kanno, Taro; Niwano, Yoshimi; Egusa, Hiroshi; Milleding, Percy; Örtengren, Ulf

    2015-10-01

    Zirconia-based dental restorations are becoming used more commonly. However, limited attention has been given to the difficulties experienced, concerning cutting, in removing the restorations when needed. The aim of the present study was to compare the cutting efficiency of diamond burs, operated using an electric high-speed dental handpiece, on zirconia (Zir) with those on lithium disilicate glass-ceramic (LD) and leucite glass-ceramic (L). In addition, evaluation of the cutting efficiency of diamond burs on Zir of different thicknesses was performed. Specimens of Zir were prepared with thicknesses of 0.5, 1.0, 2.0, and 4.0 mm, and specimens of LD and L were prepared with a thickness of 1.0 mm. Cutting tests were performed using diamond burs with super coarse (SC) and coarse (C) grains. The handpiece was operated at 150,000 rpm with a cutting force of 0.9 N. The results demonstrated that cutting of Zir took about 1.5- and 7-fold longer than cutting of LD and L, respectively. The SC grains showed significantly higher cutting efficiency on Zir than the C grains. However, when the thickness of Zir increased, the cutting depth was significantly decreased. As it is suggested that cutting of zirconia is time consuming, this should be taken into consideration in advance when working with zirconia restorations. © 2015 Eur J Oral Sci.

  16. Control of the first flowering in forest trees

    Energy Technology Data Exchange (ETDEWEB)

    Chalupka, W. [Inst. od Dendrology, Kornik (Poland); Cecich, R.A. [U.S.D.A.-Forest Service, Columbia, MO (United States). North Central Forest Experiment Station

    1997-04-01

    Precocious flowering provides opportunities to shorten a breeding cycle. A tree may flower for the first time when sufficient crown development has occurred and there are enough meristems to support both vegetative and reproductive buds. Precocious flowering can be promoted through the use of cultural techniques, such as photoperiod, accelerated growth, gibberellins and water stress. The length of the juvenile phase is dependent on genetic and environmental variables that affect achievement of a minimum size, and is positively correlated with the height of the plants within a family. Selection pressure can be applied successfully to the precocious flowering character, and crossed or inbred lines of precocious flowering progeny can be developed. Various levels and amounts of genetic control have been implicated in the control of precocious flowering. 90 refs, 1 tab

  17. Synthesis and Characterization of Flower-Like Bundles of ZnO Nanosheets by a Surfactant-Free Hydrothermal Process

    Directory of Open Access Journals (Sweden)

    Jijun Qiu

    2014-01-01

    Full Text Available Flower-like bundles of ZnO nanosheets have been prepared by using preheating hydrothermal process without any surfactants. The flower-like bundles consist of many thin and uniform hexagonal-structured ZnO nanosheets, with a thickness of 50 nm. The selected area electronic diffraction (SAED and high-resolution transmission electron microscope (HRTEM images indicate that the ZnO nanosheets are single crystal in nature. The growth mechanism of the flower-like bundles of ZnO nanosheets is discussed based on the morphology evolution with growth times and reaction conditions. It is believed that the formation of flower-like bundles of ZnO nanosheets is related to the shielding effect of OH− ions and the self-assembly process, which is dominated by a preheating time. Room temperature photoluminescence spectra results show that the annealing atmosphere strongly affects the visible emission band, which is sensitive to intrinsic and surface defects, especially oxygen interstitials, in flower-like bundles of ZnO nanosheets.

  18. Determination of total lipids and characterization of marigold flower extracts (Calendula officinalis

    Directory of Open Access Journals (Sweden)

    Novković Vesna M.

    2005-01-01

    Full Text Available Bioactive extracts from marigold flower are important ingredients for parapharmaceutical and cosmetic preparations. Their antiflogistic holeretic.antimicrobic, antidermatic and anticancer effects are due to the presence of flavonoids, carotenoids, etheric oils, and terpenoids. This study presents the results of spectrophotometric investigation for the overall carotene content calculated as (3-caroten (442 nm, visual and physico-chemical characteristics according to Ph.Jug. V in oil extracts of marigold flower obtained by maceration (room temperature and 70°C and percolation (room temperature with olive oil and sunflower oil by original procedures.The largest content of (3-carotene (57.5 mg/kg of oil extracts is in the oil extract obtained by maceration for 72 hours with olive oil (solvomodulus 1:5 m/m at room temperature.

  19. Sweetpotato Stem Cuttings Database in Preparation for Flight

    Science.gov (United States)

    Mortley, Desmond G.

    2002-01-01

    Since 1985, Tuskegee University has been engaged in research that addresses NASA's mission to achieve long-duration human space exploration on the moon and Mars. The successful research of Dr. George Washington Carver, the beginning of our long history of working with crops for food and industrial uses, is well known. This history and contemporary technical expertise in food/industrial crops, and our interest in pursuing new, interdisciplinary approaches to education and research led us to submit a proposal to NASA in 1985 to pursue the hydroponic production of sweetpotato for food for astronaut-explorers on future long-term, distant space missions. As a carbohydrate and dual vegetable (edible leaves), the versatile sweetpotato has the potential to be a key crop as a main source of energy and other nutrients such as beta-carotene, calcium and potassium. Sweetpotato is a crop very suited to space, as was documented in a monograph published by our scientists in 1984.

  20. Repellency of Lantana camara (Verbenaceae) flowers against Aedes mosquitoes.

    Science.gov (United States)

    Dua, V K; Gupta, N C; Pandey, A C; Sharma, V P

    1996-09-01

    The repellent effect of Lantana camara flowers was evaluated against Aedes mosquitoes. Lantana flower extract in coconut oil provided 94.5% protection from Aedes albopictus and Ae. aegypti. The mean protection time was 1.9 h. One application of Lantana flower can provide more than 50% protection up to 4 h against the possible bites of Aedes mosquitoes. No adverse effects of the human volunteers were observed through 3 months after the application.

  1. Analysis on Structure of Flower Market in Beijing

    OpenAIRE

    SUN, Xi; ZHANG, Yingying

    2015-01-01

    With the socio-economic development and people’s living condition improvement, the requirement for environment is higher and higher and the mental demand is also more and more. For this, Beijing Municipal Bureau of Landscape and Forestry listed survey programs of consumption demands of flower market in Beijing in 2014, and provided several recommendations in line with current situations, problems and environment of the flower industry, for future reference of flower decision making of Beiji...

  2. Transcriptomic analysis of flower development in wintersweet (Chimonanthus praecox).

    Science.gov (United States)

    Liu, Daofeng; Sui, Shunzhao; Ma, Jing; Li, Zhineng; Guo, Yulong; Luo, Dengpan; Yang, Jianfeng; Li, Mingyang

    2014-01-01

    Wintersweet (Chimonanthus praecox) is familiar as a garden plant and woody ornamental flower. On account of its unique flowering time and strong fragrance, it has a high ornamental and economic value. Despite a long history of human cultivation, our understanding of wintersweet genetics and molecular biology remains scant, reflecting a lack of basic genomic and transcriptomic data. In this study, we assembled three cDNA libraries, from three successive stages in flower development, designated as the flower bud with displayed petal, open flower and senescing flower stages. Using the Illumina RNA-Seq method, we obtained 21,412,928, 26,950,404, 24,912,954 qualified Illumina reads, respectively, for the three successive stages. The pooled reads from all three libraries were then assembled into 106,995 transcripts, 51,793 of which were annotated in the NCBI non-redundant protein database. Of these annotated sequences, 32,649 and 21,893 transcripts were assigned to gene ontology categories and clusters of orthologous groups, respectively. We could map 15,587 transcripts onto 312 pathways using the Kyoto Encyclopedia of Genes and Genomes pathway database. Based on these transcriptomic data, we obtained a large number of candidate genes that were differentially expressed at the open flower and senescing flower stages. An analysis of differentially expressed genes involved in plant hormone signal transduction pathways indicated that although flower opening and senescence may be independent of the ethylene signaling pathway in wintersweet, salicylic acid may be involved in the regulation of flower senescence. We also succeeded in isolating key genes of floral scent biosynthesis and proposed a biosynthetic pathway for monoterpenes and sesquiterpenes in wintersweet flowers, based on the annotated sequences. This comprehensive transcriptomic analysis presents fundamental information on the genes and pathways which are involved in flower development in wintersweet. And our data

  3. Photosynthetic utilization of radiant energy by CAM Dendrobium flowers

    International Nuclear Information System (INIS)

    Khoo, G.H.; Hew, C.S.; He, J.

    1997-01-01

    14 CO 2 fixation was observed in orchid Dendrobium flowers; its rate decreased with the flower development. Chlorophyll (Chl) fluorescence in different developmental stages of flowers was compared to other green plant parts (leaf, inflorescence stalk, and fruit capsule). The photochemical efficiency of photosystem 2 (PS2) (Fv/Fm) of a leaf was 14-21 % higher than that of a mature flower perianth (sepal, petal, and labellum) which had a much lower total Chl content and Chl a/b ratio. A higher quantum yield of PS2 (ΦPS2) than in the mature flowers was observed in all green parts. Flower sepals had higher Chl content, Chl a/b ratio, and Fv/Fm values than the petal and labellum. During flower development the Chl content, Chl a/b ratio, Fv/Fm, and qN decreased while ΦPS2 and qP remained constant. An exposure of developing flowers to irradiances above 50 µmol m -2 s -1 resulted in a very drastic drop of ΦPS2 and qP, and a coherent increase of qN as compared to other green plant organs. A low saturation irradiance (PFD of 100 µmol m -2 s -1 ) and the increase in qN in the flower indicate that irradiation stress may occur since there is no further protection when the flower is exposed to irradiances above 100 µmol m -2 s -1 . A low Chl/carotenoid ratio in mature flower perianth as a consequence of Chl content reduction in the course of flower development suggests a relief of irradiation stress via this mean. (author)

  4. Goethe and the ABC model of flower development.

    Science.gov (United States)

    Coen, E

    2001-06-01

    About 10 years ago, the ABC model for the genetic control of flower development was proposed. This model was initially based on the analysis of mutant flowers but has subsequently been confirmed by molecular analysis. This paper describes the 200-year history behind this model, from the late 18th century when Goethe arrived at his idea of plant metamorphosis, to the genetic studies on flower mutants carried out on Arabidopsis and Antirrhinum in the late 20th century.

  5. Effect of method of sample preparation on ruminal in situ ...

    African Journals Online (AJOL)

    Midmar) was harvested at three and four weeks after cutting and fertilizing with 200 kg nitrogen (N)/ha. Freshly cut herbage was used to investigate the following four sample preparation methods. In trial 1, herbage was (1) chopped with a paper-cutting guillotine into 5-10 mm lengths, representing fresh (FR) herbage; ...

  6. Endogenous auxin regulates the sensitivity of Dendrobium (cv. Miss Teen) flower pedicel abscission to ethylene

    NARCIS (Netherlands)

    Rungruchkanont, K.; Ketsa, S.; Chatchawankanphanich, O.; Doorn, van W.G.

    2007-01-01

    Dendrobium flower buds and flowers have an abscission zone at the base of the pedicel (flower stalk). Ethylene treatment of cv. Miss Teen inflorescences induced high rates of abscission in flower buds but did not affect abscission once the flowers had opened. It is not known if auxin is a regulator

  7. Phenolic compounds and antioxidant activity of edible flowers

    Directory of Open Access Journals (Sweden)

    Marta Natalia Skrajda

    2017-08-01

    Full Text Available Introduction: Edible flowers has been used for thousands of years. They increase aesthetic appearance of food, but more often they are mentioned in connection with biologically active substances. The main ingredient of the flowers is water, which accounts for more than 80%. In small amounts, there are also proteins, fat, carbohydrates, fiber and minerals. Bioactive substances such as carotenoids and phenolic compounds determine the functional properties of edible flowers. Aim: The aim of this work was to characterize the phenolic compounds found in edible flowers and compare their antioxidant activity. Results: This review summarizes current knowledge about the usage of edible flowers for human nutrition. The work describes the antioxidant activity and phenolic compounds of some edible flowers. Based on literature data there is a significant difference both in content of phenolic compounds and antioxidant activity between edible flowers. These difference reaches up to 3075-fold in case of antioxidant potential. Among described edible flowers the most distinguishable are roses, peonies, osmanthus fragans and sambuco nero. Conclusions: Edible flowers are the new source of nutraceuticals due to nutritional and antioxidant values.

  8. Pollinator effectiveness varies with experimental shifts in flowering time.

    Science.gov (United States)

    Rafferty, Nicole E; Ives, Anthony R

    2012-04-01

    The earlier flowering times exhibited by many plant species are a conspicuous sign of climate change. Altered phenologies have caused concern that species could suffer population declines if they flower at times when effective pollinators are unavailable. For two perennial wildflowers, Tradescantia ohiensis and Asclepias incarnata, we used an experimental approach to explore how changing phenology affects the taxonomic composition of the pollinator assemblage and the effectiveness of individual pollinator taxa. After finding in the previous year that fruit set varied with flowering time, we manipulated flowering onset in greenhouses, placed plants in the field over the span of five weeks, and measured pollinator effectiveness as the number of seeds produced after a single visit to a flower. The average effectiveness of pollinators and the expected rates of pollination success were lower for plants of both species flowering earlier than for plants flowering at historical times, suggesting there could be reproductive costs to earlier flowering. Whereas for A. incarnata, differences in average seed set among weeks were due primarily to changes in the composition of the pollinator assemblage, the differences for T. ohiensis were driven by the combined effects of compositional changes and increases over time in the effectiveness of some pollinator taxa. Both species face the possibility of temporal mismatch between the availability of the most effective pollinators and the onset of flowering, and changes in the effectiveness of individual pollinator taxa through time may add an unexpected element to the reproductive consequences of such mismatches.

  9. Ozone and infection of geranium flowers by Botrytis cinerea

    Energy Technology Data Exchange (ETDEWEB)

    Manning, W.J.; Feder, W.A.; Perkins, I.

    1970-01-01

    Flowering plants of geranium cultivars were exposed to 0.2, 0.35, and 0.55 ppm ozone for 4-hr periods at 20/sup 0/C in a greenhouse fumigation chamber. Three fully-opened flower heads were sprayed with a spore suspension of Botrytis cinerea at 2000, 1000, or 500 spores/ml immediately before exposure to ozone began. Sterile distilled water was sprayed on noninoculated flower heads. All flowers were examined for evidence of infection 24 hr after the end of the ozone-exposure periods. All flower heads were then removed and placed in wet, loosely tied plastic bags and incubated at 20/sup 0/C for 72 hr, with examination at 24-hr intervals for evidence of infection. Ozone at 0.2 ppm did not injure the plants or prevent or inhibit flower infection by B. cinerea at all inoculum levels. Natural infection also occurred on some noninoculated flowers. Ozone at 0.35 ppm did not injure the plants or prevent infection, but did inhibit pathogenesis at the 500-spore/ml inoculum level and on noninoculated flowers. Ozone at 0.55 ppm caused moderate injury on all plants. Ozone at this level did not prevent infection, but did restrict pathogenesis on all inoculated and noninoculated flowers.

  10. Profile and behavior of flower consumer: subsidies for marketing actions

    Directory of Open Access Journals (Sweden)

    Adilson Anacleto

    Full Text Available ABSTRACT The growth of per capita consumption of flowers in Brazil is still low when compared with other countries. Among several factors that may be linked to this growth gap, the establishment of few or ineffective marketing strategies was cited. In this context, we present the results of the profile and behavior of flower consumer, aiming to subsidize marketing actions for the retail segment of flower supply chain. The study was conducted through interviews with 300 people of both genders at the moment they were buying flowers at 22 flower shops in the Paraná coast. This region was selected due to its potential for flower production and commercialization, which is similar to other Brazilian regions and other countries where the flower market has economic relevance. The female gender was identified as the major consumer (n = 62.7%, with tendency of increase in consumption as education level advanced (Spearman correlation coefficient, p < 0.05 = for own use r = 0.122; p = 0.039; for gift r = 0.174; p = 0.003. The acquisition average of 4.4 ± 1.9 times per year was registered, with preferential consumption of orchids (n = 36.3% for own use and roses (n = 86.7%, for gift. The flower retail trade did not meet the expectations of consumers, especially in relation to price, promotions, and production quality. The male gender and the elderly consumer class may represent important alternatives to increase the current consumption of flowers.

  11. ANTIMICROBIAL ACTIVITY OF ROSA CANINA FLOWERS AGAINST SELECTED MICROORGANISMS

    Directory of Open Access Journals (Sweden)

    Katarína Rovná

    2015-02-01

    Full Text Available Rosa canina flowers were screened against various plant pathogenic microbial strains to study the antimicrobial properties of the plant. Ethanolic and methanolic extracts of flowers were screened applying agar well diffusion method against two Gram-negative bacteria including Escherichia coli CCM 3988 and Pseudomonas aeruginosa CCM 1960 and three microscopic filamentous fungi strains Aspergillus niger, Fusarium culmorum and Alternaria alternata, respectively. The best antimicrobial effect of ethanolic extract of Rosa canina flowers was found against Pseudomonas aeruginosa and the best antimicrobial effect of methanolic extract of Rosa canina flowers was found against Escherichia coli.

  12. Medicinal flowers. XXX. Eight new glycosides, everlastosides F-M, from the flowers of Helichrysum arenarium.

    Science.gov (United States)

    Morikawa, Toshio; Wang, Li-Bo; Ninomiya, Kiyofumi; Nakamura, Seikou; Matsuda, Hisashi; Muraoka, Osamu; Wu, Li-Jun; Yoshikawa, Masayuki

    2009-08-01

    Eight new glycosides, everlastosides F (1), G (2), H (3), I (4), J (5), K (6), L (7), and M (8), were isolated from the methanolic extract of the flowers of Helichrysum arenarium. Their structures were elucidated on the basis of chemical and physicochemical evidence.

  13. Earlier flowering did not alter pollen limitation in an early flowering shrub under short-term experimental warming

    OpenAIRE

    Pan, Cheng-Chen; Feng, Qi; Zhao, Ha-Lin; Liu, Lin-De; Li, Yu-Lin; Li, Yu-Qiang; Zhang, Tong-Hui; Yu, Xiao-Ya

    2017-01-01

    In animal pollinated plants, phenological shifts caused by climate change may have important ecological consequences. However, no empirical evidence exists at present on the consequences that flowering phenology shifts have on the strength of pollen limitation under experimental warming. Here, we investigated the effects of experimental warming on flowering phenology, flower density, reproductive success, and pollen limitation intensity in Caragana microphylla and evaluated whether earlier fl...

  14. Equilibrium Analysis in Cake Cutting

    DEFF Research Database (Denmark)

    Branzei, Simina; Miltersen, Peter Bro

    2013-01-01

    Cake cutting is a fundamental model in fair division; it represents the problem of fairly allocating a heterogeneous divisible good among agents with different preferences. The central criteria of fairness are proportionality and envy-freeness, and many of the existing protocols are designed...... to guarantee proportional or envy-free allocations, when the participating agents follow the protocol. However, typically, all agents following the protocol is not guaranteed to result in a Nash equilibrium. In this paper, we initiate the study of equilibria of classical cake cutting protocols. We consider one...... of the simplest and most elegant continuous algorithms -- the Dubins-Spanier procedure, which guarantees a proportional allocation of the cake -- and study its equilibria when the agents use simple threshold strategies. We show that given a cake cutting instance with strictly positive value density functions...

  15. Identification of Xylem Occlusions Occurring in Cut Clematis (Clematis L., fam. Ranunculaceae Juss. Stems during Their Vase Life

    Directory of Open Access Journals (Sweden)

    Agata Jedrzejuk

    2012-01-01

    Full Text Available During the vase life of cut stems obstruction of xylem vessels occurs due to microbial growth, formation of tyloses, deposition of materials in the lumen of xylem vessels and the presence of air emboli in the vascular system. Such obstructions may restrict water uptake and its transport towards upwards thus lowering their ornamental value and longevity of cut flowers. Clematis is a very attractive plant material which may be used as cut flower in floral compositions. Nothing is known about the histochemical or cytological nature of xylem blockages occurring in cut stems of this plant. This study shows that in clematis, tyloses are the main source of occlusions, although bacteria and some amorphic substances may also appear inside the vessels. A preservative composed of 200 mg dm−3 8-HQC (8-hydroxyquinolin citrate and 2% sucrose arrested bacterial development and the growth of tyloses. This information can be helpful in the development of new treatments to improve keeping qualities of cut clematis stems.

  16. TiO2 flower-like nanostructures decorated with CdS/PbS nanoparticles

    International Nuclear Information System (INIS)

    Trenczek-Zajac, Anita; Kusior, Anna; Lacz, Agnieszka; Radecka, Marta; Zakrzewska, Katarzyna

    2014-01-01

    Highlights: • TiO 2 flower-like nanostructures were prepared with the use of Ti foil and 30% H 2 O 2 . • QDs of CdS and PbS were deposited using the SILAR method. • The SILAR method makes it possible to control the size of QDs. • Band gap energy of CdS was found to be 2.35 eV. • Sensitization of TiO 2 with CdS or PbS improves the photoelectrochemical properties. - Abstract: Flower-like nanostructures of TiO 2 were prepared by immersing Ti foil in 30% H 2 O 2 at 80 °C for times varying from 15 to 240 min. Upon annealing at 450 °C in an Ar atmosphere, the received amorphous samples crystallized in an anatase structure with rutile as a minority phase. SEM images revealed that partially formed flowers were present at the surface of the prepared samples as early as after 15 min of immersion. The size of the individual flowers increased from 400–800 nm after 15 min of reaction to 2.5–6.0 μm after 240 min. It was also found that surface is very rough and surface development is considerable. After 45 min of immersion, the nanoflowers were sensitized with CdS and PbS quantum dots (QDs-CdS/QDs-PbS) deposited using the SILAR method from water- and methanol-based precursor solutions at different concentrations (0.001–0.1 M). QDs-CdS crystallized in the hawleyite structure, while QDs-PbS in the galena form. SEM analysis showed the tendency of quantum dots to agglomerate at high concentrations of the precursor in water-based solutions. QDs obtained from methanol-based solutions were uniformly distributed. The produced QDs-PbS were smaller than QDs-CdS. Based on the optical reflectance spectra, the band-gap energies of TiO 2 nanostructures with and without QDs were calculated to be 3.32 eV for flower-like TiO 2 nanostructures and 2.35 eV for QDs-CdS. The photoelectrochemical behaviour of nanoflowers was found to improve significantly after the deposition of QDs-CdS

  17. Document segmentation via oblique cuts

    Science.gov (United States)

    Svendsen, Jeremy; Branzan-Albu, Alexandra

    2013-01-01

    This paper presents a novel solution for the layout segmentation of graphical elements in Business Intelligence documents. We propose a generalization of the recursive X-Y cut algorithm, which allows for cutting along arbitrary oblique directions. An intermediate processing step consisting of line and solid region removal is also necessary due to presence of decorative elements. The output of the proposed segmentation is a hierarchical structure which allows for the identification of primitives in pie and bar charts. The algorithm was tested on a database composed of charts from business documents. Results are very promising.

  18. Correlation methods in cutting arcs

    Energy Technology Data Exchange (ETDEWEB)

    Prevosto, L; Kelly, H, E-mail: prevosto@waycom.com.ar [Grupo de Descargas Electricas, Departamento Ing. Electromecanica, Universidad Tecnologica Nacional, Regional Venado Tuerto, Laprida 651, Venado Tuerto (2600), Santa Fe (Argentina)

    2011-05-01

    The present work applies similarity theory to the plasma emanating from transferred arc, gas-vortex stabilized plasma cutting torches, to analyze the existing correlation between the arc temperature and the physical parameters of such torches. It has been found that the enthalpy number significantly influence the temperature of the electric arc. The obtained correlation shows an average deviation of 3% from the temperature data points. Such correlation can be used, for instance, to predict changes in the peak value of the arc temperature at the nozzle exit of a geometrically similar cutting torch due to changes in its operation parameters.

  19. Correlation methods in cutting arcs

    International Nuclear Information System (INIS)

    Prevosto, L; Kelly, H

    2011-01-01

    The present work applies similarity theory to the plasma emanating from transferred arc, gas-vortex stabilized plasma cutting torches, to analyze the existing correlation between the arc temperature and the physical parameters of such torches. It has been found that the enthalpy number significantly influence the temperature of the electric arc. The obtained correlation shows an average deviation of 3% from the temperature data points. Such correlation can be used, for instance, to predict changes in the peak value of the arc temperature at the nozzle exit of a geometrically similar cutting torch due to changes in its operation parameters.

  20. Antigenotoxic spinasterol from Cucurbita maxima flowers.

    Science.gov (United States)

    Villaseñor, I M; Lemon, P; Palileo, A; Bremner, J B

    1996-06-10

    The antigenotoxic constituent of squash flowers was isolated by solvent partitioning and repeated vacuum liquid chromatography. The micronucleus test, an in vivo method, was used to monitor the antigenotoxicity of the various fractions during the isolation process. Isolate SQFwB2D from the chloroform extract of squash flowers is the most antigenotoxic isolate. It decreased the mutagenicity of tetracycline by 64.7% at a dosage of 100 mg/kg mouse. Statistical analysis using Kruskall Wallis one-way analysis of variance by Ranks showed that SQFw2D is different from the control group (tetracycline + corn oil) at alpha = 0.001. GC-MSD of isolate SQFwB2D shows 2 peaks at Rt = 19.860 (SQFwB2D-1) and 20.242 min (SQFwB2D-2) with relative peak heights of 16:1, respectively. Spectral analyses show that SQFwB2D-1 is 24 alpha-ethyl-5 alpha-cholesta-7,trans-22-dien-3 beta-ol or spinasterol.

  1. Antioxidant activity of Rafflesia kerrii flower extract.

    Science.gov (United States)

    Puttipan, Rinrampai; Okonogi, Siriporn

    2014-02-01

    Rafflesia kerrii has been used in Thai traditional remedies for treatment of several diseases. However, scientific data particularly on biological activities of this plant is very rare. The present study explores an antioxidant activity of R. kerrii flower (RKF). Extracting solvent and extraction procedure were found to play an important role on the activity of RKF extract. The extract obtained from water-ethanol system showed higher antioxidant activity than that from water-propylene glycol system. Fractionated extraction using different solvents revealed that methanol fractionated extract (RM) possessed the highest antioxidant activity with Trolox equivalent antioxidant capacity (TEAC) and inhibitory concentration of 50% inhibition (IC50) values of approximately 39 mM/mg and 3 μg/mL, respectively. Phytochemical assays demonstrated that RM contained extremely high quantity of phenolic content with gallic antioxidant equivalent (GAE) and quercetin equivalent (QE) values of approximately 312 mg/g and 16 mg/g, respectively. Ultraviolet-visible spectroscopy (UV- VIS) and high-pressure liquid chromatography (HPLC) indicated that gallic acid was a major component. RM which was stored at 40°C, 75% RH for 4 months showed slightly significant change (p antioxidant activity with zero order degradation. The results of this study could be concluded that R. kerrii flower was a promising natural source of strong antioxidant compounds.

  2. Cutting temperature measurement and material machinability

    Directory of Open Access Journals (Sweden)

    Nedić Bogdan P.

    2014-01-01

    Full Text Available Cutting temperature is very important parameter of cutting process. Around 90% of heat generated during cutting process is then away by sawdust, and the rest is transferred to the tool and workpiece. In this research cutting temperature was measured with artificial thermocouples and question of investigation of metal machinability from aspect of cutting temperature was analyzed. For investigation of material machinability during turning artificial thermocouple was placed just below the cutting top of insert, and for drilling thermocouples were placed through screw holes on the face surface. In this way was obtained simple, reliable, economic and accurate method for investigation of cutting machinability.

  3. Stresses in ultrasonically assisted bone cutting

    International Nuclear Information System (INIS)

    Alam, K; Mitrofanov, A V; Silberschmidt, V V; Baeker, M

    2009-01-01

    Bone cutting is a frequently used procedure in the orthopaedic surgery. Modern cutting techniques, such as ultrasonic assisted drilling, enable surgeons to perform precision operations in facial and spinal surgeries. Advanced understanding of the mechanics of bone cutting assisted by ultrasonic vibration is required to minimise bone fractures and to optimise the technique performance. The paper presents results of finite element simulations on ultrasonic and conventional bone cutting analysing the effects of ultrasonic vibration on cutting forces and stress distribution. The developed model is used to study the effects of cutting and vibration parameters (e.g. amplitude and frequency) on the stress distributions in the cutting region.

  4. Cutting system for burnable poison rod

    International Nuclear Information System (INIS)

    Shiina, Atsushi; Toyama, Norihide; Koshino, Yasuo; Fujii, Toshio

    1989-01-01

    Burnable poison rods attached to spent fuels are contained in a containing box and transported to a receiving pool. The burnable poison rod-containing box is provisionally situated by the operation to a handling device to a provisional setting rack in a cutting pool and attached to a cutting guide of a cutting device upon cutting. The burnable poison rod is cut only in a cutting pool water and tritium generated upon cutting is dissolved into the cutting pool water. Diffusion of tritium is thus restricted. Further, the cutting pool is isolated by a partition device from the receiving pool during cutting of the burnable poison rod. Accordingly, water in which tritium is dissolved is inhibited from moving to the receiving pool and prevail of tritium contamination can be avoided. (T.M.)

  5. Effect of nano-silver and boric acid on extending the vase life of cut rose (Rosa hybrida L.).

    Science.gov (United States)

    Hashemabadi, Davood; Liavali, Mahbanoo Hoseinzadeh; Kaviani, Behzad; Mousavi, Meysam; Keyghobadi, Saghi; Zahiri, Samaneh

    2014-09-01

    Silver nano-particles (2-5 nm diam.), as antimicrobial agent and boric acid, as ethylene production inhibitor are used for enhancing the quality and vase life of cut flowers. In the present study the effects of a preservative solution containing nano-silver and boric acid on some traits of cut rose (Rosa hybrida L. cv. Yellow Island) including vase life, ethylene production, dry weight percentage, chlorophyll content, flower opening index, beta-carotene of petals and the number of basal stem end bacteria were investigated. The results showed that the effect of nano-silver and boric acid as either solitary or in combination with each other were significant (p rose treated with 100 mg l(-1) boric acid along with 5 mg l(-1) nano-silver. The lowest number of bacteria in the end of stem was calculated in cut flowers treated with the highest concentrations of boric acid (300 mg l(-1)) and nano-silver (20 mg l(-1)).

  6. How to perform RT-qPCR accurately in plant species? A case study on flower colour gene expression in an azalea (Rhododendron simsii hybrids) mapping population.

    Science.gov (United States)

    De Keyser, Ellen; Desmet, Laurence; Van Bockstaele, Erik; De Riek, Jan

    2013-06-24

    Flower colour variation is one of the most crucial selection criteria in the breeding of a flowering pot plant, as is also the case for azalea (Rhododendron simsii hybrids). Flavonoid biosynthesis was studied intensively in several species. In azalea, flower colour can be described by means of a 3-gene model. However, this model does not clarify pink-coloration. The last decade gene expression studies have been implemented widely for studying flower colour. However, the methods used were often only semi-quantitative or quantification was not done according to the MIQE-guidelines. We aimed to develop an accurate protocol for RT-qPCR and to validate the protocol to study flower colour in an azalea mapping population. An accurate RT-qPCR protocol had to be established. RNA quality was evaluated in a combined approach by means of different techniques e.g. SPUD-assay and Experion-analysis. We demonstrated the importance of testing noRT-samples for all genes under study to detect contaminating DNA. In spite of the limited sequence information available, we prepared a set of 11 reference genes which was validated in flower petals; a combination of three reference genes was most optimal. Finally we also used plasmids for the construction of standard curves. This allowed us to calculate gene-specific PCR efficiencies for every gene to assure an accurate quantification. The validity of the protocol was demonstrated by means of the study of six genes of the flavonoid biosynthesis pathway. No correlations were found between flower colour and the individual expression profiles. However, the combination of early pathway genes (CHS, F3H, F3'H and FLS) is clearly related to co-pigmentation with flavonols. The late pathway genes DFR and ANS are to a minor extent involved in differentiating between coloured and white flowers. Concerning pink coloration, we could demonstrate that the lower intensity in this type of flowers is correlated to the expression of F3'H. Currently in plant

  7. Flowering in the wild olive ( Olea europaea L.) tree (oleaster ...

    African Journals Online (AJOL)

    flowers with absence or reduced stamens and flowers with absence of pistil) are frequently observed and may reduce fruit set. This study investigates the phenology evolution and the male and female abortion of the oleaster tree (or the wild olive ...

  8. Organic Flower Bulbs From Holland - Outlook for the French Market

    NARCIS (Netherlands)

    Kamphuis, Elise

    2002-01-01

    The Netherlands is a major exporter of flower bulbs in the world. France is amongst the top10 of the biggest importers of Dutch flower bulbs. However, the growing of bulbs is very damaging to the environment. With the use of 1,5 million kilograms of pesticide and 16 million kilograms of artificial

  9. Polyploidy levels of Chinese large-flower chrysanthemum ...

    African Journals Online (AJOL)

    user

    2012-04-17

    Apr 17, 2012 ... color, and is regarded as one of two flower spectacle in the world (Chen, 2001). However, their genetic backgrounds as well as genetic relationships are lack of knowledge. Large-flower chrysanthemum has been cultivated for more than 1, 600 years (Zhao et al., 2009). It experienced long-term arti-.

  10. Does 2,4-dichlorophenoxyacetic acid induce flowering in sweet ...

    African Journals Online (AJOL)

    Most sweet potato cultivars grown in Zimbabwe are poor in agronomic and quality traits and require improvement through breeding. However, most cultivars rarely flower yet the flowers are crucial in genetic improvements. The aim of this study was to determine the effects of different levels of 2, 4- dichlorophenoxyacetic acid ...

  11. Effects of rainfall, competition and grazing on flowering of ...

    African Journals Online (AJOL)

    Birds, hares and small antelope consumed 10-50% of the flowers. Size-class distributions indicated that little recent recruitment had taken place on a ranch where palatable plants were scarce and where O. sinuatum flower production was severely depressed by grazing sheep.Language: English. Keywords: Asteraceae ...

  12. Cytokinin treatment and flower quality in Phalaenopsis orchids ...

    African Journals Online (AJOL)

    Yomi

    2012-01-24

    Jan 24, 2012 ... We previously documented an N-6-benzyladenine (BA) protocol to increase spike and flower number in. Phalaenopsis .... Sigma) at dusk. The powders of BA, Kin, and 2-. iP were each dissolved in 1 N NaOH and diluted for spraying. The duration to anthesis, spike and flower number, spike length. (from the ...

  13. When can stress facilitate divergence by altering time to flowering?

    OpenAIRE

    Jordan, Crispin Y.; Ally, Dilara; Hodgins, Kathryn A.

    2015-01-01

    Abstract Stressors and heterogeneity are ubiquitous features of natural environments, and theory suggests that when environmental qualities alter flowering schedules through phenotypic plasticity, assortative mating can result that promotes evolutionary divergence. Therefore, it is important to determine whether common ecological stressors induce similar changes in flowering time. We review previous studies to determine whether two important stressors, water restriction and herbivory, induce ...

  14. Getting More Power from Your Flowers: Multi-Functional Flower Strips Enhance Pollinators and Pest Control Agents in Apple Orchards.

    Science.gov (United States)

    Campbell, Alistair John; Wilby, Andrew; Sutton, Peter; Wäckers, Felix

    2017-09-20

    Flower strips are commonly recommended to boost biodiversity and multiple ecosystem services (e.g., pollination and pest control) on farmland. However, significant knowledge gaps remain regards the extent to which they deliver on these aims. Here, we tested the efficacy of flower strips that targeted different subsets of beneficial arthropods (pollinators and natural enemies) and their ecosystem services in cider apple orchards. Treatments included mixes that specifically targeted: (1) pollinators ('concealed-nectar plants'); (2) natural enemies ('open-nectar plants'); or (3) both groups concurrently (i.e., 'multi-functional' mix). Flower strips were established in alleyways of four orchards and compared to control alleyways (no flowers). Pollinator (e.g., bees) and natural enemy (e.g., parasitoid wasps, predatory flies and beetles) visitation to flower strips, alongside measures of pest control (aphid colony densities, sentinel prey predation), and fruit production, were monitored in orchards over two consecutive growing seasons. Targeted flower strips attracted either pollinators or natural enemies, whereas mixed flower strips attracted both groups in similar abundance to targeted mixes. Natural enemy densities on apple trees were higher in plots containing open-nectar plants compared to other treatments, but effects were stronger for non-aphidophagous taxa. Predation of sentinel prey was enhanced in all flowering plots compared to controls but pest aphid densities and fruit yield were unaffected by flower strips. We conclude that 'multi-functional' flower strips that contain flowering plant species with opposing floral traits can provide nectar and pollen for both pollinators and natural enemies, but further work is required to understand their potential for improving pest control services and yield in cider apple orchards.

  15. CuCo_2O_4 flowers/Ni-foam architecture as a battery type positive electrode for high performance hybrid supercapacitor applications

    International Nuclear Information System (INIS)

    Vijayakumar, Subbukalai; Nagamuthu, Sadayappan; Ryu, Kwang-Sun

    2017-01-01

    Graphical abstract: The Ni- foam supported CuCo_2O_4 flowers exhibits a high specific capacity with superior long term cyclic stability. - Highlights: • This paper reports the hydrothermal preparation of CuCo_2O_4 flowers on Ni-foam. • The CuCo_2O_4 flowers exhibits maximum specific capacity of 645.1C g"−"1. • After 2000 cycles, 109% of the initial specific capacity was retained. - Abstract: The battery type CuCo_2O_4 electrode was evaluated as a positive electrode material for its hybrid supercapacitor applications. CuCo_2O_4 flowers were prepared on Ni-foam through a simple hydrothermal process and post calcination treatment. The structure and morphology of the CuCo_2O_4 flowers/Ni-foam was characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and high resolution transmission electron microscopy. FESEM clearly revealed the flower-like morphology, which was composed of large number of petals. The length and width of the petals ranged from approximately 5–8 μm and approximately 50–150 nm, respectively. The CuCo_2O_4 flowers/Ni-foam electrode was employed for electrochemical characterization for hybrid supercapacitor applications. The specific capacity of the CuCo_2O_4 flower-like electrode was 692.4C g"−"1 (192.3 mA h g"−"1) at a scan rate of 5 mV s"−"1. The flower-like CuCo_2O_4 electrode exhibited a maximum specific capacity of 645.1C g"−"1 (179.2 mA h g"−"1) at a specific current of 1 A g"−"1 and good long term cyclic stability. The high specific capacity, good cyclic stability, and low internal and charge transfer resistance of the CuCo_2O_4 flowers/Ni-foam electrode confirmed the suitability of the prepared material as a positive electrode for hybrid supercapacitor applications.

  16. Wedge cutting of mild steel by CO 2 laser and cut-quality assessment in relation to normal cutting

    Science.gov (United States)

    Yilbas, B. S.; Karatas, C.; Uslan, I.; Keles, O.; Usta, Y.; Yilbas, Z.; Ahsan, M.

    2008-10-01

    In some applications, laser cutting of wedge surfaces cannot be avoided in sheet metal processing and the quality of the end product defines the applicability of the laser-cutting process in such situations. In the present study, CO 2 laser cutting of the wedge surfaces as well as normal surfaces (normal to laser beam axis) is considered and the end product quality is assessed using the international standards for thermal cutting. The cut surfaces are examined by the optical microscopy and geometric features of the cut edges such as out of flatness and dross height are measured from the micrographs. A neural network is introduced to classify the striation patterns of the cut surfaces. It is found that the dross height and out of flatness are influenced significantly by the laser output power, particularly for wedge-cutting situation. Moreover, the cut quality improves at certain value of the laser power intensity.

  17. Chip & Cut Tests an Elastomeren

    OpenAIRE

    Euchler, Eric; Heinrich, Gert; Michael, Hannes; Gehde, Michael; Stocek, Radek; Kratina, Ondrej; Kipscholl, Reinhold

    2016-01-01

    Dieser Vortrag stellt einen neuartigen Prüfstand vor, mit welchem das Chip & Cut Verhalten von Elastomeren charakterisiert werden kann. Sowohl theoretischer Hintergrund als auch praktische Erkenntnisse werden diskutiert. Die Vorstellung der Praxisrelevanz dieser Untersuchungen steht im Fokus des Vortrags.

  18. The Cutting-Edge Challenge

    Science.gov (United States)

    Share, Joani

    2005-01-01

    In a time of educational budget cuts, the arts seem to take the major brunt of the financial ax. Fine arts programs are often pitted against one another for survival. The music industry and supporting corporations, such as American Express, campaign to have instruments donated or purchased to keep educational programs alive. The visual arts do not…

  19. Why I like power cuts...

    CERN Multimedia

    Computer Security Team

    2012-01-01

    Accidental power cuts - a permanent nuisance when running accelerators or computing services, since it takes a lot of time to recover from them. While I feel very sorry for those who are under pressure to get their service running again and deeply regret the loss of down-time and availability, I must admit that I like power cuts: power cuts make computers reboot! And rebooting computers at CERN means all the pending software patches are automatically applied.   But don’t think I am egotistic enough to endorse power cuts. Not necessarily! I am already happy if you regularly patch your computer(s) yourself, where regularly means at least once a month: · If you run a centrally or locally managed Windows computer, give that small orange blinking “CMF” icon in the taskbar a chance in the evening to apply all the pending patches. Also, let it initiate a reboot at the end! · If you have a personal computer with your own Windows operating system, ...

  20. The regulation of seasonal flowering in the Rosaceae.

    Science.gov (United States)

    Kurokura, Takeshi; Mimida, Naozumi; Battey, Nicholas H; Hytönen, Timo

    2013-11-01

    Molecular mechanisms regulating the flowering process have been extensively studied in model annual plants; in perennials, however, understanding of the molecular mechanisms controlling flowering has just started to emerge. Here we review the current state of flowering research in perennial plants of the rose family (Rosaceae), which is one of the most economically important families of horticultural plants. Strawberry (Fragaria spp.), raspberry (Rubus spp.), rose (Rosa spp.), and apple (Malus spp.) are used to illustrate how photoperiod and temperature control seasonal flowering in rosaceous crops. We highlight recent molecular studies which have revealed homologues of terminal flower1 (TFL1) to be major regulators of both the juvenile to adult, and the vegetative to reproductive transitions in various rosaceous species. Additionally, recent advances in understanding of the regulation of TFL1 are discussed.

  1. Pistil Development in 2 Types of Flowers of Xanthoceras sorbifolia

    Institute of Scientific and Technical Information of China (English)

    Hu Qing; Gao Shumin; Li Fenglan

    2004-01-01

    In order to investigate flower development and female abortion during sex differentiation of Xanthoceras sorbifolia, anatomical observations and comparative study on differential proteins were carried out in different developmental stages of two types of flowers of this species. It was found that the selective abortion happened in male flower before the formation of megasporocyte. Special proteins related to the female abortion were found through 2-dimensional electrophoretic analysis. Protein A1 (14.2 kD) only existed in florescence of male flower, while B1 (13.7 kD) and B2 (18.2 kD) disappeared in that stage of male flower. They were all considered to be relative to pistil abortion of Xanthoceras sorbifolia.

  2. Analysis of changes in paper cutting forces during the cutting cycle in single-knife guillotine

    OpenAIRE

    Rusin, Agnieszka; Petriaszwili, Georgij

    2013-01-01

    Paper presents the results of changes in the three components of cutting forces of paper stacks cutting during the cutting cycle in single-knife guillotine. The changes of the three components of cutting force at different stages of cutting cycle were analyzed.

  3. Chemistry Inspired by the Colors of Fruits, Flowers and Wine

    Directory of Open Access Journals (Sweden)

    FRANK H. QUINA

    Full Text Available ABSTRACT An overview is provided of the status of research at the frontiers of investigation of the chemistry and photochemistry of two classes of natural plant pigments, the anthocyanins and the betalains, as well as of the pyranoanthocyanin pigments formed from anthocyanins during the maturation of red wine. Together, anthocyanins and betalains are responsible for almost all of the red, purple and blue colors of fruits and flowers and anthocyanins and pyranoanthocyanins are major contributors to the color of red wines. All three types of pigments are cationic below about pH 3, highly colored, non-toxic, reasonably soluble in water or alcohol and fairly stable to light. They exhibit good antioxidant or antiradical activity and, as part of our diet, confer a number of important health benefits. Systematic studies of model compounds containing the basic chromophoric groups of these three types of pigments are providing a deeper understanding of the often complex chemistry and photochemistry of these pigments and their relationship to the roles in vivo of these pigments in plants. These natural pigments are currently being exploited as starting materials for the preparation of novel semi-synthetic dyes, pigments and fluorescence probes.

  4. Evaluation of Biologically Active Compounds from Calendula officinalis Flowers using Spectrophotometry

    Directory of Open Access Journals (Sweden)

    Butnariu Monica

    2012-04-01

    Full Text Available Abstract Background This study aimed to quantify the active biological compounds in C. officinalis flowers. Based on the active principles and biological properties of marigolds flowers reported in the literature, we sought to obtain and characterize the molecular composition of extracts prepared using different solvents. The antioxidant capacities of extracts were assessed by using spectrophotometry to measure both absorbance of the colorimetric free radical scavenger 2,2-diphenyl-1-picrylhydrazyl (DPPH as well as the total antioxidant potential, using the ferric reducing power (FRAP assay. Results Spectrophotometric assays in the ultraviolet-visible (UV-VIS region enabled identification and characterization of the full range of phenolic and flavonoids acids, and high-performance liquid chromatography (HPLC was used to identify and quantify phenolic compounds (depending on the method of extraction. Methanol ensured more efficient extraction of flavonoids than the other solvents tested. Antioxidant activity in methanolic extracts was correlated with the polyphenol content. Conclusions The UV-VIS spectra of assimilator pigments (e.g. chlorophylls, polyphenols and flavonoids extracted from the C. officinalis flowers consisted in quantitative evaluation of compounds which absorb to wavelengths broader than 360 nm.

  5. Nonrandom Composition of Flower Colors in a Plant Community: Mutually Different Co-Flowering Natives and Disturbance by Aliens

    Science.gov (United States)

    Makino, Takashi T.; Yokoyama, Jun

    2015-01-01

    When pollinators use flower color to locate food sources, a distinct color can serve as a reproductive barrier against co-flowering species. This anti-interference function of flower color may result in a community assembly of plant species displaying mutually different flower colors. However, such color dispersion is not ubiquitous, suggesting a variable selection across communities and existence of some opposing factors. We conducted a 30-week study in a plant community and measured the floral reflectances of 244 species. The reflectances were evaluated in insect color spaces (bees, swallowtails, and flies), and the dispersion was compared with random expectations. We found that co-existing colors were overdispersed for each analyzed pollinator type, and this overdispersion was statistically significant for bees. Furthermore, we showed that exclusion of 32 aliens from the analysis significantly increased the color dispersion of native flowers in every color space. This result indicated that aliens disturbed a native plant–pollinator network via similarly colored flowers. Our results demonstrate the masking effects of aliens in the detection of color dispersion of native flowers and that variations in pollinator vision yield different outcomes. Our results also support the hypothesis that co-flowering species are one of the drivers of color diversification and affect the community assembly. PMID:26650121

  6. Nonrandom Composition of Flower Colors in a Plant Community: Mutually Different Co-Flowering Natives and Disturbance by Aliens.

    Directory of Open Access Journals (Sweden)

    Takashi T Makino

    Full Text Available When pollinators use flower color to locate food sources, a distinct color can serve as a reproductive barrier against co-flowering species. This anti-interference function of flower color may result in a community assembly of plant species displaying mutually different flower colors. However, such color dispersion is not ubiquitous, suggesting a variable selection across communities and existence of some opposing factors. We conducted a 30-week study in a plant community and measured the floral reflectances of 244 species. The reflectances were evaluated in insect color spaces (bees, swallowtails, and flies, and the dispersion was compared with random expectations. We found that co-existing colors were overdispersed for each analyzed pollinator type, and this overdispersion was statistically significant for bees. Furthermore, we showed that exclusion of 32 aliens from the analysis significantly increased the color dispersion of native flowers in every color space. This result indicated that aliens disturbed a native plant-pollinator network via similarly colored flowers. Our results demonstrate the masking effects of aliens in the detection of color dispersion of native flowers and that variations in pollinator vision yield different outcomes. Our results also support the hypothesis that co-flowering species are one of the drivers of color diversification and affect the community assembly.

  7. Nutrient analysis of the Beef Alternative Merchandising cuts.

    Science.gov (United States)

    Desimone, T L; Acheson, R A; Woerner, D R; Engle, T E; Douglass, L W; Belk, K E

    2013-03-01

    The objective of this study was to generate raw and cooked nutrient composition data to identify Quality Grade differences in proximate values for eight Beef Alternative Merchandising (BAM) cuts. The data generated will be used to update the nutrient data in the USDA National Nutrient Database for Standard Reference (SR). Beef Rib, Oven-Prepared, Beef Loin, Strip Loin, and Beef Loin, Top Sirloin Butt subprimals were collected from a total of 24 carcasses from four packing plants. The carcasses were a combination of USDA Yield Grades 2 (n=12) and 3 (n=12), USDA Quality Grades upper two-thirds Choice (n=8), low Choice (n=8), and Select (n=8), and two genders, steer (n=16) and heifer (n=8). After aging, subprimals were fabricated into the BAM cuts, dissected, and nutrient analysis was performed. Sample homogenates from each animal were homogenized and composited for analysis of the following: proximate analysis, long chain and trans-fatty acids, conjugated linoleic acid, total cholesterol, vitamin B-12, and selenium. This study identified seven BAM cuts from all three Quality Grades that qualify for USDA Lean; seven Select cuts that qualify for USDA Extra Lean; and three Select cuts that qualify for the American Heart Association's Heart Healthy Check. Copyright © 2012 Elsevier Ltd. All rights reserved.

  8. Optimisation of supercritical carbon dioxide extraction of essential oil of flowers of tea (Camellia sinensis L.) plants and its antioxidative activity.

    Science.gov (United States)

    Chen, Zhenchun; Mei, Xin; Jin, Yuxia; Kim, Eun-Hye; Yang, Ziyin; Tu, Youying

    2014-01-30

    To extract natural volatile compounds from tea (Camellia sinensis) flowers without thermal degradation and residue of organic solvents, supercritical fluid extraction (SFE) using carbon dioxide was employed to prepare essential oil of tea flowers in the present study. Four important parameters--pressure, temperature, static extraction time, and dynamic extraction time--were selected as independent variables in the SFE. The optimum extraction conditions were the pressure of 30 MPa, temperature of 50°C, static time of 10 min, and dynamic time of 90 min. Based on gas chromatography-mass spectrometry analysis, 59 compounds, including alkanes (45.4%), esters (10.5%), ketones (7.1%), aldehydes (3.7%), terpenes (3.7%), acids (2.1%), alcohols (1.6%), ethers (1.3%) and others (10.3%) were identified in the essential oil of tea flowers. Moreover, the essential oil of tea flowers showed relatively stronger DPPH radical scavenging activity than essential oils of geranium and peppermint, although its antioxidative activity was weaker than those of essential oil of clove, ascorbic acid, tert-butylhydroquinone, and butylated hydroxyanisole. Essential oil of tea flowers using SFE contained many types of volatile compounds and showed considerable DPPH scavenging activity. The information will contribute to the future application of tea flowers as raw materials in health-care food and food flavour industries. © 2013 Society of Chemical Industry.

  9. Identification, determination, and study of antioxidative activities of hesperetin and gallic acid in hydro-alcoholic extract from flowers of Eriobotrya japonica (Lindl.

    Directory of Open Access Journals (Sweden)

    Amir Hossein Esmaeili

    2014-06-01

    Full Text Available Objectives: Eriobotrya japonica belongs to the Rosaceae. Studies have shown that the flowers of this plant are rich in phenolic and flavonoid compounds. Accorrdingly, the evaluation of antioxidative effects of Eriobotrya japonica Flower Extract (EJFE have been performed in vitro. Material and Methods: In this study, to investigate the influences of components of EJFE on its antioxidative activity, extract was prepared using hydro-alcoholic (25:75 V/V solvent and the antioxidative activity of the extract was evaluated based on the scavenging of various radicals (DPPH and H2O2 by spectrophotometric method and chelating of ferrous ions by ferrozine reagent. Results: HPLC analysis of the Eriobotrya japonica Flower Extract (EJFE revealed hesperetin and gallic acid as the major antioxidants. When the content of total flavonoid and polyphenolic compounds in the flower extract of this plant was examined, a significantly higher level of total polyphenols was found in Eriobotrya japonica flower extract. Conclusion: Results demonstrate that the high ability to scavenge free radicals, reducing power, and Fe+2chelating activity exerted by the EJFE were due to the high content of hesperetin and gallic acid in the flowers.

  10. Deformation of products cut on AWJ x-y tables and its suppression

    Science.gov (United States)

    Hlaváč, L. M.; Hlaváčová, I. M.; Plančár, Š.; Krenický, T.; Geryk, V.

    2018-02-01

    The aim of this study is namely investigation of the abrasive water jet (AWJ) cutting of column pieces on commercial x-y cutting machines with AWJ. The shape deformation in curved and/or stepped parts of cutting trajectories caused by both the trailback (declination angle) and the taper (inclination of cut walls) can be calculated from submitted analytical model. Some of the results were compared with data measured on samples cut on two types of commercial tables. The main motivation of this investigation is determination of the percentage difference between predicted and real distortion of cutting product, i.e. accuracy of prepared analytical model. Subsequently, the possibility of reduction of the distortion can be studied through implementation of the theoretical model into the control systems of the cutting machines with the system for cutting head tilting. Despite some limitations of the used AWJ machines the comparison of calculated dimensions with the real ones shows very good correlation of model and experimental data lying within the range of measurement uncertainty. Results on special device demonstrated that the shape deformation in curved parts of the cutting trajectory can be substantially reduced through tilting of the cutting head.

  11. Rhipsalis grandiflora Haw. (Cactaceae propagation by setem cuttings

    Directory of Open Access Journals (Sweden)

    Stancato Giulio Cesare

    2003-01-01

    Full Text Available The genus Rhipsalis is being cultivated as a potted plant since the view of the pendant branches with coloured flowers and fruit is very appreciated. Considering that there is no information about the production of rooted propagules of these species, the goal of this work was to evaluate the development of stem cuttings, stimulated by the application of plant growth regulators. The indolebutyric acid (IBA was tested at 0; 4.07; 5.81, and 11.63 mmol L-1 and the naphthaleneacetic acid (NAA at 0; 4.53; 6.47, and 12.94 mmol L-1 for their activity in promoting roots on apical stem segments of Rhipsalis grandiflora Raw. The base of stem cuttings was dipped into auxin solutions mixed with talc and each one was partially embedded in fir bark (Pinus sp and fern fiber (1:1 in polystyrene propagation flats, placed throughout the rooting period in a greenhouse (50% shading, at 60-90% of relative humidity and temperatures from 20 to 25ºC. The experimental design was a completely randomised with eight treatments (twelve replicates, with samplings at 0; 20; 50; 80, and 150 days. The results indicate no differences between IBA and NAA regarding the dry mass of roots, but an increase in for concentrations of 0 and 4.07 mmol L-1 of IBA and 0 and 4.53 mmol L-1 of NAA, in relation to treatments with auxins. Stem cuttings treated with 4.07 mmol L-1 of IBA and 4.53 mmol L-1 of NAA, had greater dry mass of shoot bud differentiation in relation to those treated with 0 mmol L-1.

  12. Model for Reggeon-Pomeranchukon cuts

    International Nuclear Information System (INIS)

    Chia, S.

    1977-01-01

    A model is presented for calculating Reggeon-Pomeranchukon cuts, making use explicitly of the Mandelstam diagram. External spins are treated in a natural way. Calculation for the general case is outlined and it is shown that in practical application the cut can be calculated in a standard way. Cuts associated with the exchanges of π, rho, B, and A 2 are considered, and characteristics of the RP cuts, as well as the structure functions, are extracted and discussed. It is found that the model differs considerably from the absorption model. Two suppression schemes are operative which control the magnitudes of cut contributions to amplitudes with ''naturality'' opposite to the Reggeon. The πP cut is found to be a unique case because of the smallness of the pion mass. In general, the RP cuts are self-conspiratorial. At very high energies, all cuts, except πP cut, exhibit quasifactorization

  13. Development of underwater laser cutting technology

    International Nuclear Information System (INIS)

    Sato, Seiichi; Inaba, Takanori; Inose, Koutarou; Matsumoto, Naoyuki; Sakakibara, Yuji

    2015-01-01

    In is desirable to use remote underwater device for the decommissioning work of highly radioactive components such as the nuclear internals from a view point of reducing the ranitidine exposure to the worker. Underwater laser cutting technology has advantages. First advantage in underwater laser cutting technology is that low reaction force during cutting, namely, remote operability is superior. Second point is that underwater laser cutting generates a little amount of secondary waste, because cutting kerf size is very small. Third point is that underwater laser cutting has low risk of the process delay, because device trouble is hard to happen. While underwater laser cutting has many advantages, the careful consideration in the safe treatment of the offgas which underwater laser cutting generates is necessary. This paper describes outline of underwater laser cutting technology developed by IHI Corporation (IHI) and that this technology is effective in various dismantling works in water. (author)

  14. Quality Analysis of Cutting Steel Using Laser

    Directory of Open Access Journals (Sweden)

    Vladislav Markovič

    2013-02-01

    Full Text Available The article explores the quality dependence of the edge surface of steel C45 LST EN 10083-1 obtained cutting the material using laser on different cutting regimes and variations in the thickness of trial steel. The paper presents the influence of the main modes of laser cutting equipment Trulaser 3030, including cutting speed, pressure, angle and the thickness of the surface on the quality characteristics of the sample. The quality of the edge after laser cutting is the most important indicator influencing such technological spread in industry worldwide. Laser cutting is the most popular method of material cutting. Therefore, the article focuses on cutting equipment, cutting defects and methods of analysis. Research on microstructure, roughness and micro-toughness has been performed with reference to edge samples. At the end of the publication, conclusions are drawn.Article in Lithuanian

  15. Quality Analysis of Cutting Steel Using Laser

    Directory of Open Access Journals (Sweden)

    Vladislav Markovič

    2012-12-01

    Full Text Available The article explores the quality dependence of the edge surface of steel C45 LST EN 10083-1 obtained cutting the material using laser on different cutting regimes and variations in the thickness of trial steel. The paper presents the influence of the main modes of laser cutting equipment Trulaser 3030, including cutting speed, pressure, angle and the thickness of the surface on the quality characteristics of the sample. The quality of the edge after laser cutting is the most important indicator influencing such technological spread in industry worldwide. Laser cutting is the most popular method of material cutting. Therefore, the article focuses on cutting equipment, cutting defects and methods of analysis. Research on microstructure, roughness and micro-toughness has been performed with reference to edge samples. At the end of the publication, conclusions are drawn.Article in Lithuanian

  16. Diterpenoids from the flowers of Rhododendron molle.

    Science.gov (United States)

    Zhou, Shuai-Zhen; Yao, Sheng; Tang, Chunping; Ke, Changqiang; Li, Lu; Lin, Ge; Ye, Yang

    2014-05-23

    A new seco-kalmane-type diterpenoid, seco-rhodomollone (1), five new grayanane-type diterpenoids, rhodomollein XXI (2), 6-O-acetylrhodomollein XXI (3), 6,14-di-O-acetylrhodomollein XXI (4), rhodomollein XXII (5), and 2-O-methylrhodomollein XI (6), and two new kalmane-type diterpenoids, rhodomolleins XXIII (7) and XXIV (8), together with seven known compounds, were isolated from the flowers of Rhododendron molle collected in Guangxi Province, China. The absolute configurations of 1 and 3 were defined by single-crystal X-ray diffraction experiments. Compound 1 possesses an unprecedented 1,5-seco-kalmane skeleton presumably derived by cleavage of the C-1-C-5 bond of the kalmane skeleton. Compounds 2-4 represent the first examples from a natural source of grayanane-type diterpenoids with a chlorine substituent.

  17. Microclimate and Individual Variation in Pollinators: Flowering Plants are More than Their Flowers

    OpenAIRE

    Herrera, Carlos M.

    1995-01-01

    Variation in pollinator composition at the individual plant level is an important prerequisite for plant specialization on pollinators that does not seem to have been investigated previously. I studied variation in pollinator composition in a southeastern Spanish population of the insect-pollinated shrub Lavandula latifolia (Labiatae) and examined its correlates, with particular reference to the distinction between factors intrinsic (flower morphology, nectar standing crop, size of floral dis...

  18. Effect of ion beam irradiation on morphological and flowering characteristics of chrysanthemum

    International Nuclear Information System (INIS)

    Shakinah Salleh; Zaiton Ahmad; Affrida Abu Hassan; Thohiroh Lee Abdullah

    2012-01-01

    Chrysanthemum morifolium is an important temperate cut flower for Malaysian floriculture industry and the lack of new local owned varieties led to this mutation breeding research. The objective of this study was to compare the effectiveness of ion beam irradiation in generating mutations on ray florets and nodal explants of Chrysanthemum morifolium cv. Reagan Red. Ion beams has become a new physical mutagens for mutation breeding. The ray florets and nodal explants were irradiated with ion beam at doses 0, 0.5, 1.0, 2.0, 3.0, 5.0, 8.0, 10, 15, 20 and 30 Gy. The 50 % of in vitro shoot regeneration (RD 50 ) for ray florets explants was 2.0 Gy and for nodal explants was 4.0 Gy. Thus, relative biological effectiveness (RBE) for ray florets was found 2.0 times higher than the nodal explants. The regenerated plant lets were planted in the greenhouse at MARDI, Cameron Highlands for morphological screening. Overall performance of survival plant lets derived from in vitro nodal and ray florets explants was recorded. The characters studied include plant morphology and flowering characteristic. The ray florets explants were found to be more sensitive to ion beam irradiation and generated more mutations as compared to nodal explants. (author)

  19. Fibre laser cutting stainless steel: Fluid dynamics and cut front morphology

    Science.gov (United States)

    Pocorni, Jetro; Powell, John; Deichsel, Eckard; Frostevarg, Jan; Kaplan, Alexander F. H.

    2017-01-01

    In this paper the morphology of the laser cut front generated by fibre lasers was investigated by observation of the 'frozen' cut front, additionally high speed imaging (HSI) was employed to study the fluid dynamics on the cut front while cutting. During laser cutting the morphology and flow properties of the melt film on the cut front affect cut quality parameters such as cut edge roughness and dross (residual melt attached to the bottom of the cut edge). HSI observation of melt flow down a laser cutting front using standard cutting parameters is experimentally problematic because the cut front is narrow and surrounded by the kerf walls. To compensate for this, artificial parameters are usually chosen to obtain wide cut fronts which are unrepresentative of the actual industrial process. This paper presents a new experimental cutting geometry which permits HSI of the laser cut front using standard, commercial parameters. These results suggest that the cut front produced when cutting medium section (10 mm thick) stainless steel with a fibre laser and a nitrogen assist gas is covered in humps which themselves are covered by a thin layer of liquid. HSI observation and theoretical analysis reveal that under these conditions the humps move down the cut front at an average speed of approximately 0.4 m/s while the covering liquid flows at an average speed of approximately 1.1 m/s, with an average melt depth at the bottom of the cut zone of approximately 0.17 mm.

  20. Grapevine fruiting cuttings: validation of an experimental system to study grapevine physiology. I. Main vegetative characteristics

    Directory of Open Access Journals (Sweden)

    Nathalie Ollat

    1998-03-01

    Full Text Available A method for producing fruiting cuttings of grapevine cv. Cabernet Sauvignon is described. The main developmental features of these cuttings are presented. The clusters reach maturity after 5 months and the period of cluster development is not shortened. Before flowering, a careful control of stem and leaf growth improves the partitioning of stored carbon towards the roots and the cluster. Vegetative growth occurs mainly between fruit set and veraison. During ripening, the leaf to fruit ratio is between 20 and 30 cm2 of leaf area per gram of fruit. In the cuttings as well as in grapevines from the vineyard, free polyamine content in the leafblade does not change during development. Conjugate polyamine content does not evolve in the same way. It peaks at veraison for vineyard leaves but decreases continuously for cuttings. A proper nutrient solution provides a minerai composition in accordance with viticultural requirements. The cuttings also behave like vineyard plants in response to different levels of potassium in the nutrient solution.