WorldWideScience

Sample records for prepare propyne c3h4

  1. Quantitative mid-infrared spectra of allene and propyne from room to high temperatures

    KAUST Repository

    Es-sebbar, Et-touhami

    2014-11-01

    Allene (a-C3H4; CH2CCH2) and propyne (p-C3H4; CH3C2H) have attracted much interest because of their relevance to the photochemistry in astrophysical environments as well as in combustion processes. Both allene and propyne have strong absorption in the infrared region. In the present work, infrared spectra of a-C3H4 and p-C3H4 are measured in the gas phase at temperatures ranging from 296 to 510 K. The spectra are measured over the 580-3400 cm-1 spectral region at resolutions of 0.08 and 0.25 cm-1 using Fourier Transform Infrared spectroscopy. Absolute integrated intensities of the main infrared bands are determined at room temperature and compared with values derived from literature for both molecules. Integrated band intensities are also determined as a function of temperature in various spectral regions.

  2. Determination of molecular line parameters for acrolein (C(3)H(4)O) using infrared tunable diode laser absorption spectroscopy.

    Science.gov (United States)

    Harward, Charles N; Thweatt, W David; Baren, Randall E; Parrish, Milton E

    2006-04-01

    Acrolein (C(3)H(4)O) molecular line parameters, including infrared (IR) absorption positions, strengths, and nitrogen broadened half-widths, must be determined since they are not included in the high resolution transmission (HITRAN) molecular absorption database of spectral lines. These parameters are required for developing a quantitative analytical method for measuring acrolein in a single puff of cigarette smoke using tunable diode laser absorption spectroscopy (TDLAS). The task is complex since acrolein has many highly overlapping infrared absorption lines in the room temperature spectrum and the cigarette smoke matrix contains thousands of compounds. This work describes the procedure for estimating the molecular line parameters for these overlapping absorption lines in the wavenumber range (958.7-958.9 cm(-1)) using quantitative reference spectra taken with the infrared lead-salt TDLAS instrument at different pressures and concentrations. The nitrogen broadened half-width for acrolein is 0.0937 cm(-1)atm(-1) and to our knowledge, is the first time it has been reported in the literature.

  3. Rate Coefficients of the Reaction of OH with Allene and Propyne at High Temperatures

    KAUST Repository

    Es-Sebbar, Et Touhami

    2016-09-28

    Allene (H2C═C═CH2; a-C3H4) and propyne (CH3C≡CH; p-C3H4) are important species in various chemical environments. In combustion processes, the reactions of hydroxyl radicals with a-C3H4 and p-C3H4 are critical in the overall fuel oxidation system. In this work, rate coefficients of OH radicals with allene (OH + H2C═C═CH2 → products) and propyne (OH + CH3C≡CH → products) were measured behind reflected shock waves over the temperature range of 843–1352 K and pressures near 1.5 atm. Hydroxyl radicals were generated by rapid thermal decomposition of tert-butyl hydroperoxide ((CH3)3–CO–OH), and monitored by narrow line width laser absorption of the well-characterized R1(5) electronic transition of the OH A–X (0,0) electronic system near 306.7 nm. Results show that allene reacts faster with OH radicals than propyne over the temperature range of this study. Measured rate coefficients can be expressed in Arrhenius form as follows: kallene+OH(T) = 8.51(±0.03) × 10–22T3.05 exp(2215(±3)/T), T = 843–1352 K; kpropyne+OH(T) = 1.30(±0.07) × 10–21T3.01 exp(1140(±6)/T), T = 846–1335 K.

  4. Titan's stratospheric C 2N 2, C 3H 4, and C 4H 2 abundances from Cassini/CIRS far-infrared spectra

    Science.gov (United States)

    Teanby, N. A.; Irwin, P. G. J.; de Kok, R.; Jolly, A.; Bézard, B.; Nixon, C. A.; Calcutt, S. B.

    2009-08-01

    Far-IR (25-50 μm, 200-400 cm -1) nadir and limb spectra measured during Cassini's four year prime mission by the Composite InfraRed Spectrometer (CIRS) instrument have been used to determine the abundances of cyanogen (C 2N 2), methylacetylene (C 3H 4), and diacetylene (C 4H 2) in Titan's stratosphere as a function of latitude. All three gases are enriched at northern latitudes, consistent with north polar subsidence. C 4H 2 abundances agree with those derived previously from mid-IR data, but C 3H 4 abundances are about 2 times lower, suggesting a vertical gradient or incorrect band intensities in the C 3H 4 spectroscopic data. For the first time C 2N 2 was detected at southern and equatorial latitudes with an average volume mixing ratio of 5.5±1.4×10 derived from limb data ( >3-σ significance). This limb result is also corroborated by nadir data, which give a C 2N 2 volume mixing ratio of 6±3×10 (2- σ significance) or alternatively a 3- σ upper limit of 17×10. Comparing these figures with photochemical models suggests that galactic cosmic rays may be an important source of N 2 dissociation in Titan's stratosphere. Like other nitriles (HCN, HC 3N), C 2N 2 displays greater north polar relative enrichment than hydrocarbons with similar photochemical lifetimes, suggesting an additional loss mechanism for all three of Titan's main nitrile species. Previous studies have suggested that HCN requires an additional sink process such as incorporation into hazes. This study suggests that such a sink may also be required for Titan's other nitrile species.

  5. Space Group of Aquaimidazolemaleatozinc, [(H2O)(C3H4N2)(O2CCH=CHCO2Zn)]n

    Institute of Scientific and Technical Information of China (English)

    NG Seik Weng

    2005-01-01

    The space group of [(H2O)(C3H4N2)(O2CCH=CHCO2Zn)]n, which was originally described in the acentric Pc space group (Liu et al., Chin. J. Struct. Chem. 2004, 23, 160~163), is re-described in the centric P21/c space group.The crystal structure of (H2O)(C3H4N2)O2C-CH=CHCO2Zn was refined in the acentric Pc space group on 266 variables to R = 0.037 for the 1926 of the 2067 obeying the I > 2σ criterion[1]. The structure is better described in the centric P21/c space group (Table 1) as the two indepen-dent formula units are related by a center of symmetry. The 21 screw axis is must be pre-sent, as noted from the systematically absent 0k0 (k = 2n + 1) reflections in the 3302 reflections that were simulated[2, 3] from the published cell dimensions and atomic coordinates. Crystallo-graphica[4] estimates the hemisphere of reflections to be 3302, so that only a little more than the minimum monoclinic data must have been collec-ted in the study. A revision from Pc to P21/c is not particularly common[5] as the P21/c space group is uniquely determined from systematic absences. The polymeric chain propagates linearly along the c-axis of the unit cell (Fig. 1).

  6. Rich methane premixed laminar flames doped by light unsaturated hydrocarbons - Part I : allene and propyne

    CERN Document Server

    Gueniche, Hadj-Ali; Dayma, Guillaume; Fournet, Ren{é}; Battin-Leclerc, Fr{é}d{é}rique

    2006-01-01

    The structure of three laminar premixed rich flames has been investigated: a pure methane flame and two methane flames doped by allene and propyne, respectively. The gases of the three flames contain 20.9% (molar) of methane and 33.4% of oxygen, corresponding to an equivalence ratio of 1.25 for the pure methane flame. In both doped flames, 2.49% of C3H4 was added, corresponding to a ratio C3H4/CH4 of 12% and an equivalence ratio of 1.55. The three flames have been stabilized on a burner at a pressure of 6.7 kPa using argon as dilutant, with a gas velocity at the burner of 36 cm/s at 333 K. The concentration profiles of stable species were measured by gas chromatography after sampling with a quartz microprobe. Quantified species included carbon monoxide and dioxide, methane, oxygen, hydrogen, ethane, ethylene, acetylene, propyne, allene, propene, propane, 1,2-butadiene, 1,3-butadiene, 1-butene, isobutene, 1-butyne, vinylacetylene, and benzene. The temperature was measured using a PtRh (6%)-PtRh (30%) thermocou...

  7. Control of branch formation in ethylene polymerization by a [Ni(h3-2-MeC3H4(diimine] PF6 / DEAC catalyst system

    Directory of Open Access Journals (Sweden)

    Escher Fernanda F. N.

    2001-01-01

    Full Text Available The polymerization of ethylene mediated by [Ni(eta³-2-MeC3H4{ArN=C(HC(H=NAr}] PF6, Ar = 2,6-C6H3iPr2 /DEAC catalyst precursor under mild reaction conditions (reaction temperature between -10 ºC and 25 ºC and ethylene pressure between 109 and 1520 kPa yields high molecular weight branched polyethylene. The degree of branching was modulated by a careful choice of reaction conditions. Thus, at 0 ºC and 109 kPa, the branching degree was 17 branches/1000 backbone carbon atoms and at 25 ºC, it went up to 90 branches/1000 backbone carbon atoms. The nature of the observed branches (methyl, ethyl and longer, their quantity and distribution along the polymer backbone chain can be rationalized in terms of a chain walking process and control of the extend of isomerization by the steric hindrance of the growing chain.

  8. GAS PERMEABILITY OF COPOLY(1-TRIMETHYL-SILYL -1- PROPYNE-PENTAMETHYL-DISILYL-1-PROPYNE ) MEMBRANE

    Institute of Scientific and Technical Information of China (English)

    ZHENG Guodong; T. Nakagawa; A. Higuchi; K. Nagai

    1992-01-01

    The permeability of copoly(1-trimethylsilyl-1-propyne-pentamethyldisilyl-1-propyne) membrane for twelve gases (O2, N2, CO2, H2, D2, He, Ar, CH4, C2H4, C2H6, C3H6 and C3H8) was examined.The basic laws of solution and diffusion of the gases in the membrane were expounded preliminarily.It was found that a linear relationship between logarithm of diffusion coefficient (D) and critical molar volume (Vc) of the gases. The permeation characteristics of the gases in the copoly (1-trimethylsilyl-1-propyne-pentamethyldisilyl-l-propyne) membrane was also discussed.

  9. 16-. mu. m laser oscillation in propyne

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, T.A.; Wittig, C.

    1981-07-01

    An optically pumped propyne laser with tunable output in the 609--637-cm/sup -1/ region is reported. The pump source is a transverse electric atmosphere CO/sub 2/ laser, and 16-..mu..m laser energies as high as 6 mJ are obtained.

  10. Rotameric transformations in the photochemistry of TpM(CO)2(η(3)-C3H4R), where Tp = tris(pyrazolyl)borate, M = Mo or W, and R = H or Me.

    Science.gov (United States)

    Thornley, Wyatt A; Bitterwolf, Thomas E

    2015-05-01

    Low energy photolysis of TpM(CO)2(η(3)-C3H4R), where Tp = tris(pyrazolyl)borate, M = Mo or W, and R = 2-H or 2-Me in PVC matrices at 85 K results in exo/gauche isomerism of the allyl ligand. This transformation comes in contrast to the behaviour observed in cyclopentadienyl analogues which undergo exo/endo isomerism. DFT computations reveal an η(3) → η(1)* → η(3) mechanism for the allyl rotameric interconversion where the η(1)*-allyl intermediate is generated upon MLCT excitation.

  11. Seasonal evolution of C2N2, C3H4, and C4H2 in Titan's lower stratosphere, inferred from Cassini/CIRS far-IR observations

    Science.gov (United States)

    Sylvestre, Melody; Teanby, Nicholas A.; Vinatier, Sandrine; Irwin, Patrick Gerard Joseph

    2016-10-01

    Due to its obliquity (26.7°), Titan's atmosphere undergoes significant seasonal variations of insolation, which are expected to affect significantly its photochemistry and large-scale dynamics. The duration of the Cassini mission enables us to monitor these changes and to better understand the atmospheric processes at play.Here, we study the seasonal evolution of the composition of Titan's lower stratosphere (10 mbar). We analyse nadir and limb high resolution (0.5 cm-1) spectra from Cassini/CIRS (Composite InfraRed Spectrometer) in the far infrared (200-400 cm-1), in order to retrieve the abundances of three photochemical species: C2N2 (cyanogen), C4H2 (diacetylene), and C3H4 (methylacetylene). These data span all the latitudes and were acquired from 2004 to 2015. Consequently, they provide a good overview of the seasonal evolution of the meridional distributions of C2N2, C4H2, and C3H4, from northern winter to mid-spring. For instance, these measurements show a strong enrichment in these three species at the South pole in the lower stratosphere, consistent with previous observations (Coustenis et al., 2016 ; Vinatier et al., 2015 ; Teanby et al., 2012). In contrast, other latitudes present much less variations in the mixing ratios of these gases, especially at the North Pole. These vertical and meridional abundances profiles and their comparison with previous studies provide constraints on the photochemical processes in Titan's atmosphere. We also use these measurements to monitor the seasonal evolution of atmospheric circulation in the lower stratosphere.

  12. Synthesis and Crystal Structure of Hexakis(imidazole) Cobalt(Ⅱ) Dicinnamate [Co(C3H4N2)6](PhCHCHCOO)2%咪唑配合物[Co(C3H4N2)6](PhCHCHCOO)2的合成及晶体结构

    Institute of Scientific and Technical Information of China (English)

    赵朴素; 建方方

    2000-01-01

    The complex [Co(Im)6](Cin)2 (Im=imidazole,Cin=cinnamate) was prepared by reaction of Co(PhCHCHCOO)2 with imidazole in ethanol. It has been determined by single crystal X-ray analyses. The crystals are triclinic, space group P, with a=9.7601(3),b=10.5935(3),c=11.3269(2)(A),α =69.948(1),β =71.027(1),γ =62.803(1)°, and Z=1. The crystal structure of the title complex consists of monomeric [Co(Im)6]2+ cations and cinnamate anions in which the cobalt(Ⅱ) ion assumes a centrosymmetric octahedral geometry with the CoN6 chromophore. In the solid state, the complex forms a three dimensional network through N-H… O hydrogen bonds, the intermolecular hydrogen bonds connect the [Co(Im)6]2+ cations and cinnamate anions.The cinnamate anions are nearly planar.

  13. Quarternization of 3-azido-1-propyne oligomers obtained by copper(I-catalyzed azide–alkyne cycloaddition polymerization

    Directory of Open Access Journals (Sweden)

    Shun Nakano

    2015-06-01

    Full Text Available 3-Azido-1-propyne oligomer (oligoAP samples, prepared by copper(I-catalyzed azide–alkyne cycloaddition (CuAAC polymerization, were quarternized quantitatively with methyl iodide in sulfolane at 60 °C to obtain soluble oligomers. The conformation of the quarternized oligoAP in dilute DMSO-d6 solution was examined by pulse-field-gradient spin-echo NMR based on the touched bead model.

  14. Imidazole Coordinated Sandwich-type Antimony Polyoxotungstates Na9[{Na(H2O)2}3{M(C3H4N2)}3(SbW9O33)2]·xH2O(M=NiⅡ, CoⅡ, ZnⅡ, MnⅡ)

    Institute of Scientific and Technical Information of China (English)

    CUI Rui-Rui; WANG Hu-Lin; YANG Xin-Yu; REN Shu-Hu; HU Huai-Ming; FU Feng; WANG Ji-Wu; XUE Gang-Lin

    2007-01-01

    The imidazole covalently coordinated sandwich-type heteropolytungstates Na9[{Na(H2O)2}3{M(C3H4N2)}3-(SbW9O33)2]·xH2O (M=NiⅡ, x=32; M=CoⅡ, x=32; M=ZnⅡ, x=33; M=MnⅡ, x=34) were obtained by the reaction of Na2WO4·2H2O, SbCl3·6H2O, NiCl2·6H2O [MnSO4·H2O, Co(NO3)2·6H2O, ZnSO4·7H2O] and imidazole at pH≈7.5. The structure of Na9[{Na(H2O)2}3{Ni(C3H4N2)}3(SbW9O33)2]·32H2O was determined by single crystal X-ray diffraction. Polyanion [{Na(H2O)2}3{Ni(C3H4N2)}3(SbW9O33)2}3]9- has approximate C3v symmetry, imidazole coordinated six-nuclear cluster [{Na(H2O)2}3{Ni(C3H4N2)}3]9+ is encapsulated between two (α-SbW9O33)9-,the three rings of imidazole in the polyanion are perpendicular to the horizontal plane formed by six metals (Na-Ni-Na-Ni-Na-Ni) in the central belt, and π-stacking interactions exist between imidazoles of neighboring polyanions with dihedral angel of 60°. The compounds were also characterized by IR, UV-Vis spectra, TG and DSC, and the thermal decomposition mechanism of the four compounds was suggested by TG curves.

  15. High-resolution photoabsorption spectrum of jet-cooled propyne

    Energy Technology Data Exchange (ETDEWEB)

    Jacovella, U. [Laboratorium für Physikalische Chemie, ETH Zürich, 8093 Zürich (Switzerland); Holland, D. M. P. [STFC, Daresbury Laboratory, Daresbury, Warrington, Cheshire WA4 4AD (United Kingdom); Boyé-Péronne, S. [Institut des Sciences Moléculaires d’Orsay, UMR 8214, CNRS and Univ. Paris-Sud, F-91405 Orsay (France); Joyeux, D.; Archer, L. E.; Oliveira, N. de; Nahon, L. [Synchrotron Soleil, L’Orme des Merisiers, F-91192 Gif-sur-Yvette (France); Lucchese, R. R. [Department of Chemistry, Texas A and M University, College Station, Texas 77843 (United States); Xu, Hong; Pratt, S. T. [Argonne National Laboratory, Argonne, Illinois 60439 (United States)

    2014-09-21

    The absolute photoabsorption cross section of propyne was recorded between 62 000 and 88 000 cm{sup −1} by using the vacuum-ultraviolet, Fourier-transform spectrometer at the Synchrotron Soleil. This cross section spans the region including the lowest Rydberg bands and extends above the Franck-Condon envelope for ionization to the ground electronic state of the propyne cation, X{sup ~+}. Room-temperature spectra were recorded in a flowing cell at 0.9 cm{sup −1} resolution, and jet-cooled spectra were recorded at 1.8 cm{sup −1} resolution and a rotational temperature of ∼100 K. The reduced widths of the rotational band envelopes in the latter spectra reveal new structure and simplify a number of assignments. Although nf Rydberg series have not been assigned previously in the photoabsorption spectrum of propyne, arguments are presented for their potential importance, and the assignment of one nf series is proposed. As expected from previous photoelectron spectra, Rydberg series are also observed above the adiabatic ionization threshold that converge to the v{sub 3}{sup +} = 1 and 2 levels of the C≡C stretching vibration.

  16. XPS STUDIES ON SURFACE MODIFIED POLY[1-(TRIMETHYLSILYL)-1-PROPYNE] MEMBRANES Ⅱ SURFACE MODIFICATION BY BROMINE VAPOR

    Institute of Scientific and Technical Information of China (English)

    XU Guanfan; SUN Xiaoguang; QIU Xuepeng; ZHANG Jinlan; ZHENG Guodong

    1994-01-01

    Surface modification of poly [ 1-(trimethylsilyl )-1-propyne ] ( PTMSP ) membranes by bromine vapor has been studied. It is shown that Br/C atomic ratio at the surfacesincreased with the time of bromination until about 60 min, then it reached a plateau. The results of XPS and IR studies indicated that the addition of bromine to double bonds and the replacement of H on CH3 by bromine had taken place so that a new peak at 286.0 eV (C-Br)in C1sspectra and some new bands, e. g. at 1220 and 580cm-1,in IR spectra were formed. The fact, Po2, permeability of oxygen, decreased and αO2/N2, separation factor of oxygen relative to nitrogen, increased with bromination time, shows that surface modification of PTMSP by bromine may be an efficient approachto prepare PTMSP membranes used for practical gas separations.

  17. Homogeneous Gold Catalysis through Relativistic Effects: Addition of Water to Propyne

    CERN Document Server

    Lein, Matthias; Schwerdtfeger, Peter

    2009-01-01

    In the catalytic addition of water to propyne the Au(III) catalyst is not stable under non-relativistic conditions and dissociates into a Au(I) compound and Cl2. This implies that one link in the chain of events in the catalytic cycle is broken and relativity may well be seen as the reason why Au(III) compounds are effective catalysts.

  18. Microwave Spectroscopic Investigations of the C-H\\cdotsπ Containing Complexes CH_2F_2\\cdotsPROPYNE and CH_2ClF\\cdotsPROPYNE

    Science.gov (United States)

    Peebles, Rebecca A.; Peebles, Sean A.; Christenholz, Cori L.; Ernst, Anthony A.; Dhahir, Yasser J.

    2013-06-01

    The spectra of the CH_2F_2\\cdotspropyne and CH_2ClF\\cdotspropyne complexes have been studied by chirped-pulse and resonant cavity Fourier-transform microwave spectroscopy and by ab initio calculations at the MP2/6-311++G(2d,2p) level. Both complexes contain C-H\\cdotsπ contacts, with the halogen atoms angled towards the methyl group end of the propyne. While CH_2F_2\\cdotspropyne has C_s symmetry, CH_2ClF\\cdotspropyne has C_1 symmetry, with the fluorine and chlorine atoms straddling the propyne. Investigation of four single ^{13}C and the DC≡CCH_3 isotopologues in CH_2F_2\\cdotspropyne has allowed a detailed structural determination, while only the ^{35}Cl and ^{37}Cl isotopologues have so far been assigned for CH_2ClF\\cdotspropyne. Experimental data will be compared with ab initio results and with the analogous acetylene complexes, both of which have C_s symmetry structures, with double C-H\\cdotsπ interactions.

  19. Macrochain configuration, stucture of free volume and transport properties of poly(1-trimethylsilyl-1-propyne) and poly(1-trimethylgermyl-1-propyne)

    KAUST Repository

    Matson, Samira M.

    2012-08-01

    The relationship between poly(1-trimethylsilyl-1-propyne) (PTMSP) and poly(1-trimethylger- myl-1-propyne) (PTMGP) microstructure, gas permeability and structure of free volume is reported. n-Butane/methane mixed-gas permeation properties of PTMSP and PTMGP membranes with different cis-/trans-composition have been investigated. The n-butane/methane selectivities for mixed gas are by an order higher than the selectivities calculated from pure gas measurements (the mixed-gas n-butane/methane selectivities are 20-40 for PTMSP and 22-35 for PTMGP). Gas permeability and n-butane/methane selec- tivity essentially differ in polymers with different cis-/trans-composition. Positron annihilation lifetime spec- troscopy investigation of PTMSP and PTMGP with different microstructure has determined distinctions in total amount and structure of free volume, i.e. distribution of free volume elements. The correlation between total amount of free volume and gas transport parameters is established: PTMSP and PTMGP with bigger free volume exhibit higher n-butane permeability and mixed-gas n-butane/methane selectivity. Such behav- ior is discussed in relation to the submolecular structure of polymers with different microstructure and sorp- tion of n-butane in polymers with different free volume. © Pleiades Publishing, Ltd., 2012.

  20. Microwave Assisted Enzymatic Kinetic Resolution of (±-1-Phenyl-2-propyn-1-ol in Nonaqueous Media

    Directory of Open Access Journals (Sweden)

    Saravanan Devendran

    2014-01-01

    Full Text Available Kinetic resolution of 1-phenyl-2-propyn-1-ol, an important chiral synthon, was studied through trans-esterification with acyl acetate to investigate synergism between microwave irradiation and enzyme catalysis. Lipases from different microbial origins were employed for the kinetic resolution of (R/S-1-phenyl-2-propyn-1-ol, among which Candida antarctica lipase B, immobilized on acrylic resin (Novozym 435, was found to be the best catalyst in n-hexane as solvent. Vinyl acetate was the most effective among different acyl esters studied. The effect of various parameters was studied in a systematic manner. Definite synergism between microwave and enzyme was observed. The initial rate was improved around 1.28 times under microwave irradiation than conventional heating. Under optimum conditions, maximum conversion (48.78% and high enantiomeric excess (93.25% were obtained in 2 h. From modeling studies, it is concluded that the reaction follows the Ping-Pong bi-bi mechanism with dead end alcohol inhibition. Kinetic parameters were obtained by using nonlinear regression. This process is green, clean, and easily scalable as compared to the chemical process.

  1. SYNTHESIS, CHARACTERIZATION AND OPTICAL PROPERTIES OF THE COPOLYMERS OF C60 AND 1-PHENYL-1-PROPYNE

    Institute of Scientific and Technical Information of China (English)

    Hong-yao Xu; Ben-zhong Tang

    1999-01-01

    While WCl6-Ph4Sn fails to polymerize 1-phenyl-1-propyne (PP) at room temperature, high molecular weight (Mw up to 410×103) polymers are obtained in high yields (up to 80%) when the polymerizations of PP are carried out in the presence of C60 using the W catalyst under the same conditions.The polymers are soluble in common organic solvents such as THF, chloroform, and toluene. Molecular structures of the polymers are characterized by FT-IR, UV, NMR, GPC and XRD, and it is found that C60 is copolymerized with PP. Thus C60 plays the dual roles of comonomer and cocatalyst in the polymerization reaction. C60 contents of the copolymers can be easily changed by varying the C60 amounts in the feed mixtures. The copolymers effectively limit strong 532 nm laser pulses, whose limiting performance is superior to that of parent C60.

  2. Chirped Pulse Microwave Spectroscopy in Pulsed Uniform Supersonic Flows: Observation of K-Dependent Rates in the CL + Propyne Reaction

    Science.gov (United States)

    Ariyasingha, Nuwandi M.; Broderick, Bernadette M.; Thompson, James O. F.; Suits, Arthur

    2016-06-01

    Chirped-Pulse Fourier-transform microwave spectroscopy in uniform supersonic flows (CPUF) has been applied to study the reaction of Cl atoms with propyne. The approach utilizes broad-band microwave spectroscopy to extract structural information with MHz resolution and near universal detection, in conjunction with a Laval flow system, which offers thermalized conditions at low temperatures and high number densities. Our previous studies have exploited this approach to obtain multichannel product branching fractions in a number of polyatomic systems, with isomer and often vibrational level specificity. This report highlights an additional capability of the CPUF technique: here, the state-specific reactant depletion is directly monitored on a microsecond timescale. In doing so, a clear dependence on the rotational quantum number K in the rate of the reaction between Cl atoms and propyne is revealed. Future prospects for the technique will be discussed.

  3. 1-Phenyl-1-propyne on Cu(111): TOFMS TPD, XPS, UPS, and 2PPE Studies.

    Science.gov (United States)

    Sohn, Youngku; Wei, Wei; White, John M

    2007-11-20

    The bonding properties of 1-phenyl-1-propyne (PP, C6H5CCCH3) on Cu(111) at 100 K have been studied using temperature-programmed desorption (TPD), and X-ray, ultraviolet, and two-photon photoemission spectroscopies (XPS, UPS, and 2PPE). In TPD, there is no evidence for dissociation. Multilayer desorption occurs at 187 K, and monolayer desorption occurs at 320 (83.5 kJ/mol) and 390 K (102.4 kJ/mol), with the latter dominating. Based on the calibrated C(1s) XPS, the saturation monolayer coverage is one PP per four surface Cu atoms. The broad and asymmetric C(1s) intensity profile of the monolayer can be resolved into three symmetric components, with peaks at 283.6, 284.5, and 285.2 eV and intensities of 2:6:1, respectively. These are attributed, respectively, to acetylenic carbons bound to Cu, phenyl, and methyl carbons. The monolayer valence band ultraviolet photoemission spectrum profile contains four resonances attributable to PP perturbed by interactions with the Cu(111) substrate. With the exception of the highest occupied molecular orbital (HOMO) that is shifted by 0.4 eV, these are uniformly shifted by 1 eV further from the Fermi level for the multilayer. Calculated electron density plots of the occupied orbitals coupled with UPS profiles suggest a spectator role for the phenyl group and bonding to Cu via the acetylenic carbons. The adsorption of 1.0 monolayer (ML) of PP on Cu(111) lowers the work function by 0.85 eV. Using 2PPE, two unoccupied orbitals were identified at 1.0 (U1*-LUMO) and 0.6 eV (U2*-image state) below the vacuum level. A chemisorption model consistent with these spectroscopic results and the major chemisorption peak in TPD involve di-sigma-bonding of the acetylenic carbons to a pair of second-nearest neighbor surface Cu atoms (cross-bridge).

  4. Exploiting the gate opening effect in a flexible MOF for selective adsorption of propyne from C1/C2/C3 hydrocarbons

    NARCIS (Netherlands)

    Li, L.; Krishna, R.; Wang, Y.; Yang, J.; Wang, X.; Li, J.

    2016-01-01

    The separation of propyne from light hydrocarbon mixtures is of technological importance but poses considerable technical challenges. This article reports on the potential of a flexible metal-organic framework [Cu(dhbc)(2)(4,4'-bipy)], with gate-opening characteristics, that exhibits adsorption

  5. Consecutive Three-Component Synthesis of 3-(HeteroAryl-1H-pyrazoles with Propynal Diethylacetal as a Three-Carbon Building Block

    Directory of Open Access Journals (Sweden)

    Thomas J. J. Müller

    2011-11-01

    Full Text Available A novel consecutive three-component synthesis of 3-(heteroaryl-1H-pyrazoles via room temperature Sonogashira arylation of propynal diethylacetal used as a propargyl aldehyde synthetic equivalent has been disclosed. The final acetal cleavage-cyclocondensation with hydrazine hydrochloride at 80 °C rapidly furnishes the title compounds in a one-pot fashion.

  6. A theoretical study of hydrogen complexes of the XH-pi type between propyne and HF, HCL or HCN.

    Science.gov (United States)

    Tavares, Alessandra M; da Silva, Washington L V; Lopes, Kelson C; Ventura, Elizete; Araújo, Regiane C M U; do Monte, Silmar A; da Silva, João Bosco P; Ramos, Mozart N

    2006-05-15

    The present manuscript reports a systematic investigation of the basis set dependence of some properties of hydrogen-bonded (pi type) complexes formed by propyne and a HX molecule, where X=F, Cl and CN. The calculations have been performed at Hartree-Fock, MP2 and B3LYP levels. Geometries, H-bond energies and vibrational have been considered. The more pronounced effects on the structural parameters of the isolated molecules, as a result of complexation, are verified on RCtriple bondC and HX bond lengths. As compared to double-zeta (6-31G**), triple-zeta (6-311G**) basis set leads to an increase of RCtriple bondC bond distance, at all three computational levels. In the case where diffuse functions are added to both hydrogen and 'heavy' atoms, the effect is more pronounced. The propyne-HX structural parameters are quite similar to the corresponding parameters of acetylene-HX complexes, at all levels. The largest difference is obtained for hydrogen bond distance, RH, with a smaller value for propyne-HX complex, indicating a stronger bond. Concerning the electronic properties, the results yield the following ordering for H-bond energies, DeltaE: propynecdots, three dots, centeredHF>propynecdots, three dots, centeredHCl>propynecdots, three dots, centeredHCN. It is also important to point out that the inclusion of BSSE and zero-point energies (ZPE) corrections cause significant changes on DeltaE. The smaller effect of ZPE is obtained for propynecdots, three dots, centeredHCN at HF/6-311++G** level, while the greatest difference is obtained at MP2/6-31G** level for propynecdots, three dots, centeredHF system. Concerning the IR vibrational it was obtained that larger shift can be associated with stronger hydrogen bonds. The more pronounced effect on the normal modes of the isolated molecule after the complexation is obtained for HX stretching frequency, which is shifted downward.

  7. Reaction Dynamics of O((3)P) + Propyne: I. Primary Products, Branching Ratios, and Role of Intersystem Crossing from Crossed Molecular Beam Experiments.

    Science.gov (United States)

    Vanuzzo, Gianmarco; Balucani, Nadia; Leonori, Francesca; Stranges, Domenico; Nevrly, Vaclav; Falcinelli, Stefano; Bergeat, Astrid; Casavecchia, Piergiorgio; Cavallotti, Carlo

    2016-07-14

    We performed synergic experimental/theoretical studies on the mechanism of the O((3)P) + propyne reaction by combining crossed molecular beams experiments with mass-spectrometric detection and time-of-flight analysis at 9.2 kcal/mol collision energy (Ec) with ab initio electronic structure calculations at a high level of theory of the relevant triplet and singlet potential energy surfaces (PESs) and statistical calculations of branching ratios (BRs) taking into account intersystem crossing (ISC). In this paper (I) we report the results of the experimental investigation, while the accompanying paper (II) shows results of the theoretical investigation with comparison to experimental results. By exploiting soft electron ionization detection to suppress/mitigate the effects of the dissociative ionization of reactants, products, and background gases, product angular and velocity distributions at different charge-to-mass ratios were measured. From the laboratory data angular and translational energy distributions in the center-of-mass system were obtained for the five competing most important product channels, and product BRs were derived. The reactive interaction of O((3)P) with propyne under single collision conditions is mainly leading to the rupture of the three-carbon atom chain, with production of the radical products methylketenyl + atomic hydrogen (BR = 0.04), methyl + ketenyl (BR = 0.10), and vinyl + formyl (BR = 0.11) and the molecular products ethylidene/ethylene + carbon monoxide (BR = 0.74) and propandienal + molecular hydrogen (BR = 0.01). Because some of the products can only be formed via ISC from the entrance triplet to the low-lying singlet PES, we infer from their BRs an amount of ISC larger than 80%. This value is dramatically large when compared to the negligible ISC reported for the O((3)P) reaction with the simplest alkyne, acetylene. At the same time, it is much larger than that (∼20%) recently observed in the related reaction of the three

  8. Preparation

    Directory of Open Access Journals (Sweden)

    M.M. Dardir

    2014-03-01

    Full Text Available Some hexanamide-mono and di-linoleniate esters were prepared by the reaction of linolenic acid and hexanamide (derived from the reaction of hexanoic acid and diethanolamine. The chemical structure for the newly prepared hexanamide-mono and di-linoleniate esters were elucidated using elemental analysis, (FTIR, H 1NMR and chemical ionization mass spectra (CI/Ms spectroscopic techniques. The results of the spectroscopic analysis indicated that they were prepared through the right method and they have high purity. The new prepared esters have high biodegradability and lower toxicity (environmentally friendly so they were evaluated as a synthetic-based mud (ester-based mud for oil-well drilling fluids. The evaluation included study of the rheological properties, filtration and thermal properties of the ester based-muds formulated with the newly prepared esters compared to the reference commercial synthetic-based mud.

  9. Phase transitions and dielectric properties of a hexagonal ABX3 perovskite-type organic-inorganic hybrid compound: [C3H4NS][CdBr3].

    Science.gov (United States)

    Liao, Wei-Qiang; Ye, Heng-Yun; Zhang, Yi; Xiong, Ren-Gen

    2015-06-21

    A new organic-inorganic hexagonal perovskite-type compound with the formula ABX3, thiazolium tribromocadmate(ii) (1), in which thiazolium cations are situated in the space between the one-dimensional chains of face-sharing CdBr(6) octahedra, has been successfully synthesized. Systematic characterizations including differential scanning calorimetry measurements, variable-temperature structural analyses, and dielectric measurements reveal that it undergoes two structural phase transitions, at 180 and 146 K. These phase transitions are accompanied by remarkable dielectric relaxation and anisotropy. The thiazolium cations remain orientationally disordered during the two phase transition processes. The origins of the phase transitions at 180 and 146 K are ascribed to the slowing down and reorientation of the molecular motions of the cations, respectively. Moreover, the dielectric relaxation process well described by the Cole-Cole equation and the prominent dielectric anisotropy are also connected with the dynamics of the dipolar thiazolium cations.

  10. Crystal structure, magnetic and photoelectric properties of coordination polymer[Co2(C3H4N2)4(C10H2O8)]n

    Institute of Scientific and Technical Information of China (English)

    NIU Shuyun; FAN Hongtao; JIN Jing; JIN Xianglin; YANG Zhongzhi

    2004-01-01

    A novel Co(Ⅱ) coordination polymer bridged by 1,2,4,5-benzene-tetracarboxylate is solvothermally synthesized, which possesses one-dimensional chain structure.The complex crystallizes in the triclinic crystal system, P1space group, a = 0.9610(1) nm, b = 0.9684(1) nm, c = 0.7924(1)nm, a = 96.695(9)°, β= 102.741(6)°, γ= 116.551(5)°, V = 0.6236(2) nm3, Z = 2, R1 = 0.0342, wR2 = 0.0990. The surface photovoltage spectra measurement shows that the title complex exhibits obvious photovoltage response in the 300-800 nm regions. The variable temperature susceptibility reveals that the complex possesses weak antiferromagnetic property.

  11. 3-[3-(3-florophenyl-2-propyn-1-ylthio)-1, 2, 5-thiadiazol-4-yl]-1, 2, 5, 6-tetrahydro-1- methylpyridine oxalate, a novel xanomeline derivative, improves neural cells proliferation and survival in adult mice

    Institute of Scientific and Technical Information of China (English)

    Xiaoliang Zhang; Qiang Gong; Shuang Zhang; Lin Wang; Yinghe Hu; Haiming Shen; Suzhen Dong

    2012-01-01

    The present study analyzed the influence of 3-[3-(3-florophenyl-2-propyn-1-ylthio)-1, 2, 5-thiadiazol-4-yl]-1, 2, 5, 6-tetrahydro-1-methylpyridine oxalate (EUK1001), a novel xanomeline derivative of the M1/M4 receptor agonist, on hippocampal neurogenesis in adult C57BL6 mice. Results showed that 15-day EUK1001 treatment via intraperitoneal injection promoted neural cell proliferation in the dentate gyrus, although cell differentiation did not change. The majority of bromodeoxyuridine-positive cells co-expressed the immature neuronal marker doublecortin. In addition, the level of neurogenesis in the subventricular zone was not altered. Brain-derived neurotrophic factor mRNA expression was up-regulated following EUK1001 treatment, but no change was observed in expression of camp-responsive element binding protein 1, paired box gene 6, vascular endothelial growth factor alpha, neurogenic differentiation factor 1, and wingless-related mouse mammary tumor virus integration site 3A mRNA. These experimental findings indicated that EUK1001 enhanced proliferation and survival of hippocampal cells, possibly by increasing brain-derived neurotrophic factor expression.

  12. Effects of Inorganic Anions on UV-Fe(Ⅲ)-C3 H4 O4 System%无机阴离子对 UV-铁(Ⅲ)-丙二酸体系的影响

    Institute of Scientific and Technical Information of China (English)

    李晓; 景伟文; 李晓芳; 李万茸

    2015-01-01

    In this paper,the effects of three kinds of common inorganic anions (SO 2 -4 、Cl- 、NO -3 )on the conversion of iron,the degradation of DMP and the mutual mechanism were observed in the system of UV-iron (Ⅲ)-malonic acid.The condition of photodegradation was conducted when the pH=3,the ratio of Iron (Ⅲ)perchlorate hydrate and malonic acid is 1∶10.The results showed that in the system of UV-iron (Ⅲ)-malonic acid,inorganic anions not only have a significant impact on the conversion of iron but also have some impact on the degradation of DMP.When exploring the effects of inorganic anions on the conversion of iron,whether there were DMP or there no the two conditions between the discussions.Experimental re-sults showed that the degradation of inorganic anions on DMP:SO 2 -4 and NO -3 have a weak role in promo-ting the degradation rate of DMP,while Cl- has no significant impact on the degradation rate of DMP in studying the impact of inorganic anions on the DMP experiments.%分析了3种常见的无机阴离子(SO 2-4、Cl-、NO -3)对 UV-铁(Ⅲ)-丙二酸体系中铁价态转化和邻苯二甲酸二甲酯(DMP)降解率的影响以及两者之间的机理联系。在 pH=3、高氯酸铁与丙二酸配比为1∶10的条件下进行光降解。结果表明,在 UV-铁(Ⅲ)-丙二酸体系中,无机阴离子不但对铁价态之间的转化有显著影响,而且对DMP 的降解也有一定影响。在探讨无机阴离子对铁价态之间的转化影响的研究中,分别以存在与不存在 DMP 两种条件下进行讨论。在探讨无机阴离子对 DMP 的影响研究中,结果表明,无机阴离子对 DMP 的降解作用表现为:SO 2-4和 NO -3对 DMP 的降解率有微弱的促进作用,而 Cl-对 DMP 的降解率无显著影响。

  13. Syntheses and Crystal Structures of Two New Compounds Containing Triarylamineand Benzoic Hydrazide Units [Zn(μ-O2CCH=CHCO2)(C3H4N2)(H2O)]n

    Institute of Scientific and Technical Information of China (English)

    邹武新; 于海涛; 郭辉; 孟继本

    2004-01-01

    Two new compounds containing triarylamine and benzoic hydrazide units, 4-[N,N-di(4-toyl)amino]benzaldehyde-N-(4-ethoxylphenyl)-formyl hydrazone 3a and 4-[N,N-di(4-toyl) amino]benzaldehyde-N-(2-ethoxylphenyl)-formyl hydrazone 3b, have been synthesized and their crystal structures (C30H29N3O2, Mr = 463.56) were interpreted by a combination technique of 1HNMR, IR, elemental analysis, mass spectra, UV-Vis spectra and X-ray crystallography, respec- tively. The crystal of 3a belongs to monoclinic, space group P21/n with a = 9.321(3) A, b = 11.046(4) A, c = 24.335(9) A, β=92.649(7)°, V = 2502.7(16) A3, Z = 4,μ =0.078 mm-1, Dc =1.230 g/cm3, F(000) = 984, the final R = 0.0590 and wR = 0.1316 for 4367observed reflections with I > 2σ(I). The crystal of 3b belongs to monoclinic, space group P21/c with a = 10.637(4) A, b = 24.138(10) A, c = 10.398(4) A, β= 104.913(8)°, V= 2579.8(17) A3, Z = 4,μ = 0.075 mm-1, Dc = 1.194 g/cm3, F(000) = 984, the final R =0.0631 and wR =0.1006 for 4463 observed reflections with I > 2σ(I). X-ray crystallography revealed that the nitrogen atom in the triarylamine moiety is of sp2 hybridization with the three phenyl rings twisted to each other.

  14. Simple preparation of new [(18) F]F-labeled synthetic amino acid derivatives with two click reactions in one-pot and SPE purification.

    Science.gov (United States)

    Yook, Cheol-Min; Lee, Sang Ju; Oh, Seung Jun; Ha, Hyun-Joon; Lee, Jong Jin

    2015-06-30

    New [(18) F]fluorinated 1,2,3-triazolyl amino acid derivatives were efficiently prepared from Huisgen 1,3-dipolar cycloaddition reactions, well known as click reaction. We developed two simultaneous click reactions in one-pot with a simple solid-phase extraction (SPE) purification method. [(18) F]fluoro-1-propyne was obtained at a 45% non-decay corrected radiochemical yield based on the [(18) F]fluoride ion. The one-pot and simultaneous two click reactions were performed with unprotected azido-alkyl amino acid, [(18) F]fluoro-1-propyne, and lipophilic additive alkyne to produce three synthetic amino acid derivatives, AMC-101 ([(18) F]-6a), AMC-102 ([(18) F]-6b), and AMC-103 ([(18) F]-6c) with 29%, 28%, and 24% of non-decay corrected radiochemical yields, respectively. All radiotracers indicated that radiochemical purities were >95% without any residual organic solvent. Our new method involving two click reactions in one-pot showed high radiochemical and chemical purity by easy removal of the residual precursor from the simultaneous two click reactions. Copyright © 2015 John Wiley & Sons, Ltd.

  15. Reaction Dynamics of O((3)P) + Propyne: II. Primary Products, Branching Ratios, and Role of Intersystem Crossing from Ab Initio Coupled Triplet/Singlet Potential Energy Surfaces and Statistical Calculations.

    Science.gov (United States)

    Gimondi, Ilaria; Cavallotti, Carlo; Vanuzzo, Gianmarco; Balucani, Nadia; Casavecchia, Piergiorgio

    2016-07-14

    The mechanism of the O((3)P) + CH3CCH reaction was investigated using a combined experimental/theoretical approach. Experimentally the reaction dynamics was studied using crossed molecular beams (CMB) with mass-spectrometric detection and time-of-flight analysis at 9.2 kcal/mol collision energy. Theoretically master equation (ME) simulations were performed on a potential energy surface (PES) determined using high-level ab initio electronic structure calculations. In this paper (II) the theoretical results are described and compared with experiments, while in paper (I) are reported and discussed the results of the experimental study. The PES was investigated by determining structures and vibrational frequencies of wells and transition states at the CASPT2/aug-cc-pVTZ level using a minimal active space. Energies were then determined at the CASPT2 level increasing systematically the active space and at the CCSD(T) level extrapolating to the complete basis set limit. Two separate portions of the triplet PES were investigated, as O((3)P) can add either on the terminal or the central carbon of the unsaturated propyne bond. Minimum energy crossing points (MECPs) between the triplet and singlet PESs were searched at the CASPT2 level. The calculated spin-orbit coupling constants between the T1 and S0 electronic surfaces were ∼25 cm(-1) for both PESs. The portions of the singlet PES that can be accessed from the MECPs were investigated at the same level of theory. The system reactivity was predicted integrating stochastically the one-dimensional ME using Rice-Ramsperger-Kassel-Marcus theory to determine rate constants on the full T1/S0 PESs, accounting explicitly for intersystem crossing (ISC) using the Landau-Zener model. The computational results are compared both with the branching ratios (BRs) determined experimentally in the companion paper (I) and with those estimated in a recent kinetic study at 298 K. The ME results allow to interpret the main system reactivity: CH

  16. Reaction Mechanism and Regioselectivity of Cu(I)-Catalyzed Hydrocarboxylation of 1-Phenyl-propyne with Carbon Dioxide%铜催化CO2和1-苯基丙炔的氢羧基化反应机理及区域选择性

    Institute of Scientific and Technical Information of China (English)

    赵义; 刘永军; 禚淑萍

    2015-01-01

    Density functional theory (DFT) calculations have been used to conduct a detailed study of the mechanism involved the copper(I)-catalyzed hydrocarboxylation of 1-phenyl-propyne using CO2 and hydrosilane. Theoretical calculations suggested that the activated catalyst Cl2IPrCuH is initial y generated in situ by the reaction of Cl2IPrCuF with (EtO)3SiH, and that the entire catalytic reaction involves three steps, including (1) the addition of Cl2IPrCuH to 1-phenyl-propyne to afford two isomeric copper alkenyl intermediates, which lead to the formation of the corresponding finalα,β-unsaturated carboxylic acid derivatives;(2) CO2 insertion to give the corresponding copper carboxylate intermediate; and (3) σ-bond metathesis of the copper carboxylate intermediate with a hydrosilane to provide the corresponding silyl ester with the regeneration of the active catalyst. The results of our calculations show that the rate-limiting steps for the two paths leading to the twoα,β-unsaturated carboxylic acid derivatives are different. In Path a, the alkyne and CO2 insertion steps were both identified as possible rate-limiting steps, with free energy barriers of 68.6 and 67.8 kJ∙mol-1, respectively. However, in Path b, the alkyne insertion step was identified as the only possible rate-limiting step with an energy barrier of 78.7 kJ∙mol-1. These results were in agreement with the experimental observations. It was also found that the alkyne insertion step control ed the regioselectivity of the products, and that electronic effects were responsible for the experimentally observed regioselectivity.%采用密度泛函理论(DFT)方法研究了在还原剂(EtO)3SiH存在下,铜(I)(Cl2IPrCuF)催化CO2插入1-苯基丙炔生成α,β不饱和羧酸的反应机理.计算结果表明, Cl2IPrCuF首先与(EtO)3SiH生成活性催化剂Cl2IPrCuH,然后经历三个步骤完成催化反应:(1) Cl2IPrCuH与1-苯基丙炔加成生成烯基铜中间体.由于炔烃的不对称性,烯基铜

  17. Solution preparation

    Energy Technology Data Exchange (ETDEWEB)

    Seitz, M.G.

    1982-01-01

    Reviewed in this statement are methods of preparing solutions to be used in laboratory experiments to examine technical issues related to the safe disposal of nuclear waste from power generation. Each approach currently used to prepare solutions has advantages and any one approach may be preferred over the others in particular situations, depending upon the goals of the experimental program. These advantages are highlighted herein for three approaches to solution preparation that are currently used most in studies of nuclear waste disposal. Discussion of the disadvantages of each approach is presented to help a user select a preparation method for his particular studies. Also presented in this statement are general observations regarding solution preparation. These observations are used as examples of the types of concerns that need to be addressed regarding solution preparation. As shown by these examples, prior to experimentation or chemical analyses, laboratory techniques based on scientific knowledge of solutions can be applied to solutions, often resulting in great improvement in the usefulness of results.

  18. Difluoromethane preparation

    NARCIS (Netherlands)

    Wiersma, A.; Sandt, E.J.A.; Van Bekkum, H.; Makkee, M.; Moulijn, J.A.

    1996-01-01

    Abstract of NL 9401574 (A) The invention relates to a method for preparing difluoromethane, wherein dichlorodifluoromethane or monochlorodifluoromethane is brought into contact with hydrogen in the presence of palladium on activated carbon, wherein the loading of the palladium on the activated c

  19. How Prepared is Prepared Enough?

    Science.gov (United States)

    Porter-Levy; Macleod; Rickert

    1996-10-01

    A 17-year-old female was in the final stage in treatment of right unilateral cleft lip and palate. She had undergone a number of previous surgeries. Hearing and speech were good on evaluation, and her social and family situation were deemed excellent. After preparatory orthodontics she underwent a Lefort I maxillary advancement. Surgery was successful and she was admitted into postoperative recovery. However, the lack of adequate preoperative preparation caused traumatic reaction from the patient and her parents: anxiety over appearance, crying, refusal of oral fluids and oral care, refusal of analgesia, and refusal to mobilize. The patience and persistence of hospital staff slowly overcame all adversities and the patient moved on to full and successful recovery, but this case prompted changes in preoperative procedures and involvement of patients and their families in postoperative meal selection, planing, and preparation.

  20. Preparing for Surgery

    Science.gov (United States)

    ... Events Advocacy For Patients About ACOG Preparing for Surgery Home For Patients Search FAQs Preparing for Surgery ... Surgery FAQ080, August 2011 PDF Format Preparing for Surgery Gynecologic Problems What is the difference between outpatient ...

  1. Preparing for Surgery

    Science.gov (United States)

    ... Events Advocacy For Patients About ACOG Preparing for Surgery Home For Patients Search FAQs Preparing for Surgery ... Surgery FAQ080, August 2011 PDF Format Preparing for Surgery Gynecologic Problems What is the difference between outpatient ...

  2. Preparing for Multiple Births

    Science.gov (United States)

    ... Video Games, and the Internet Preparing for Multiple Births KidsHealth > For Parents > Preparing for Multiple Births Print ... a combination of both. The Risks of Multiple Births The most common risk involved with multiple births ...

  3. Thesis Preparation Manual

    OpenAIRE

    1999-01-01

    "This Thesis Preparation Manual has been written to provide you with format and procedure guidance for preparing and processing your thesis at the Naval Postgraduate School. It covers both unclassified and classified theses. All theses and thesis technical reports must be prepared in accordance with these guidelines. Please note that this manual is not written in the thesis format." form the Foreword

  4. International perspectives on coal preparation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-31

    The report consists of the vugraphs from the presentations which covered the following topics: Summaries of the US Department of Energy`s coal preparation research programs; Preparation trends in Russia; South African coal preparation developments; Trends in hard coal preparation in Germany; Application of coal preparation technology to oil sands extraction; Developments in coal preparation in China; and Coal preparation in Australia.

  5. [Aesthetic surgery, psychic preparation].

    Science.gov (United States)

    Feiss, R

    2003-10-01

    The aesthetic surgery impacts the psychological picture of the body. The candidate must be prepared to this change in appearance. If not, the surgeon must suggest the psychological preparation, evaluating the risk of dissatisfaction, in order to allow the surgical and narcissistic success of his operation. The author, a psychiatric, beneficiary in a strong experience of a surgical assistance, develops the interest of such a preparation upon a period of about 15 years (1988-2002).

  6. Materials Preparation Center

    Data.gov (United States)

    Federal Laboratory Consortium — MPC is recognized throughout the worldwide research community for its unique capabilities in purification, preparation, and characterization of: rare earth metals,...

  7. Materials Preparation Center

    Data.gov (United States)

    Federal Laboratory Consortium — MPC is recognized throughout the worldwide research community for its unique capabilities in purification, preparation, and characterization of: rare earth metals,...

  8. Thyroid preparation overdose

    Science.gov (United States)

    Thyroid preparations are medicines used to treat thyroid gland disorders. Overdose occurs when someone takes more than the normal or recommended amount of this medicine. This can be by accident or ...

  9. Access cavity preparation.

    Science.gov (United States)

    Adams, N; Tomson, P L

    2014-03-01

    Each stage of root canal treatment should be carried out to the highest possible standard. The access cavity is arguably the most important technical stage, as subsequent preparation of the root canal(s) can be severely comprised if this is not well executed. Inadequate access can lead to canals being left untreated, poorly disinfected, difficult to shape and obturate, and may ultimately lead to the failure of the treatment. This paper highlights common features in root canal anatomy and outlines basic principles for locating root canals and producing a good access cavity. It also explores each phase of the preparation in detail and offers suggestions of instruments that have been specifically designed to overcome potential difficulties in the process. Good access design and preparation will result in an operative environment which will facilitate cleaning, shaping and obturation of the root canal system in order to maximise success.

  10. Preparation of hydrophobic coatings

    Science.gov (United States)

    Branson, Eric D.; Shah, Pratik B.; Singh, Seema; Brinker, C. Jeffrey

    2009-02-03

    A method for preparing a hydrophobic coating by preparing a precursor sol comprising a metal alkoxide, a solvent, a basic catalyst, a fluoroalkyl compound and water, depositing the precursor sol as a film onto a surface, such as a substrate or a pipe, heating, the film and exposing the film to a hydrophobic silane compound to form a hydrophobic coating with a contact angle greater than approximately 150.degree.. The contact angle of the film can be controlled by exposure to ultraviolet radiation to reduce the contact angle and subsequent exposure to a hydrophobic silane compound to increase the contact angle.

  11. Sperm preparation for fertilization

    NARCIS (Netherlands)

    Gadella, B.M.

    2014-01-01

    Description This book contains 19 chapters that discuss theoretical and applied andrology for domestic, zoo and wild animals. Topics include semen and its constituents; sperm production and harvest; determinants of sperm morphology; sperm preparation for fertilization; practical aspects of semen cry

  12. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2009-01-01

    The Human Resources Department is organizing a preparation for retirement seminar, which will take place on the afternoons of the 11, 13, 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members below 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to availability of places. Registration: In view of the number of people concerned and the limited capacity of the main auditorium, you are requested to register in advance via ...

  13. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2009-01-01

    The Human Resources Department is organizing a preparation for retirement seminar, which will take place in the afternoons of 11, 13, 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members below 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to the availability of places. Registration: In view of the number of people concerned and the limited capacity of the Main Auditorium, you are requested to register in advance via Ind...

  14. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2009-01-01

    The Human Resources Department is organizing a preparation for retirement seminar, which will take place on the afternoons of the 11, 13, 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members below 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to the availability of places. Registration: In view of the number of people concerned and the limited capacity of the Main Auditorium, you are requested to register in advance ...

  15. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2009-01-01

    The Human Resources Department is organizing a preparation for retirement seminar, which will take place on the afternoons of the 11, 13, 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members under the age of 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to the availability of places. Registration: In view of the number of people concerned and the limited capacity of the Main Auditorium, you are requested to register ...

  16. Preparations, models, and simulations.

    Science.gov (United States)

    Rheinberger, Hans-Jörg

    2015-01-01

    This paper proposes an outline for a typology of the different forms that scientific objects can take in the life sciences. The first section discusses preparations (or specimens)--a form of scientific object that accompanied the development of modern biology in different guises from the seventeenth century to the present: as anatomical-morphological specimens, as microscopic cuts, and as biochemical preparations. In the second section, the characteristics of models in biology are discussed. They became prominent from the end of the nineteenth century onwards. Some remarks on the role of simulations--characterising the life sciences of the turn from the twentieth to the twenty-first century--conclude the paper.

  17. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2009-01-01

    The Human Resources Department is organizing a preparation for retirement seminar, which will take place on the afternoons of the 11, 13, 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members under the age of 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to the availability of places. Registration: In view of the number of people concerned and the limited capacity of the Main Auditorium, you are requested to register ...

  18. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2009-01-01

    The Human Resources Department is organizing a preparation for retirement seminar, which will take place on the afternoons of the 11, 13, 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members below 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to the availability of places. Registration: In view of the number of people concerned and the limited capacity of the Main Auditorium, you are requested to register in advance ...

  19. Preparation of mullite fiber

    Energy Technology Data Exchange (ETDEWEB)

    Chen, L.; Wang, B.; Liu, S.; Yan, Y. [Xiamen Univ. (China). Dept. of Chemistry

    1996-06-01

    Transparent mullite fibers have been prepared using aluminum carboxylates (ACs) and tetraethyl orthosilicate (TEOS) as starting materials. The ACs are derived from the catalyzed dissolution of elemental aluminum in a mixture of formic acid and acetic acid. The solubility of aluminum in the acids is influenced by the concentrations of the acids, water, and additives and the preparation temperature. A 1:4:3:24 molar ratio of aluminum, formic acid, acetic acid, and water dissolves the aluminum completely to give a colorless, clear solution suitable for fiber synthesis. The mixture of the ACs and TEOS, in the presence of ethyl alcohol as a mutual solvent at 50--60 C, is concentrated to give a spinnable dope, from which mullite precursor fibers can be drawn. Heat treatment of the precursor at 1,250 C yields crystallized and transparent mullite fibers.

  20. Preparation for Physics Redux

    Science.gov (United States)

    Adelson, Edward

    2006-12-01

    The textbook for our preparation for physics course has been rewritten ab initio. Like its predecessor, it adapts a spiral approach to dealing with preconceptions, but this version encourages work at higher levels in Bloom's taxonomy and makes students sensitive to how p-prims affect their understanding. As its title: "All in Proportion: Preparation for Physics" indicates, it emphasizes how far proportional reasoning will take the student. Classwork is mainly group work, and various techniques are used to encourage students to complete the learning cycle on material that has not been mastered. Both the FCI and the Lawson "Classroom Test of Scientific Reasoning" have been given to gauge student progress. Preliminary results will be reported and sample materials will be shown.

  1. [Microflora of spiruline preparations].

    Science.gov (United States)

    Jacquet, J

    1975-01-01

    A study, by direct microscopic examination and cultures, shows that the microflore which accompanies the spirulines preparations, varies as the origin and the technologie treatment quality. The main species are bacillacees; then, come faecal streptococcus which are the best contaminations indicators; enterobacteries, yeasts, moulds spores, are exceptional. Dry products as getting old, entail a great decrease of all the species, the anaerobies being more resistant.

  2. The Preparation of Graphene

    Institute of Scientific and Technical Information of China (English)

    Chen Yanyan

    2015-01-01

    Graphene has unique structure and possesses excellent physical and chemical properties, and it has received a great deal of attention in related research fields. The quality, quantity and application of graphene are related to its preparation methods. At present the bottleneck of graphene research is that both high-quality and large quantity of graphene could not be obtained simultaneously and the reason is that the basic mechanism of graphene formation has mot been wel understood.

  3. Preparation of chitosan gel

    Directory of Open Access Journals (Sweden)

    Lagerge S.

    2012-06-01

    Full Text Available Aerogel conditioning of the chitosan makes it possible to prepare porous solids of significant specific surface. The increase in the chitosan concentration or the degree of acetylation decreases the specific surface of the synthesized chitosan gel. Whereas drying with supercritical CO2 more effectively makes it possible to preserve the volume of the spheres of gel and to have a more significant specific surface in comparison with evaporative drying.

  4. Physiologic effects of bowel preparation

    DEFF Research Database (Denmark)

    Holte, Kathrine; Nielsen, Kristine Grubbe; Madsen, Jan Lysgård;

    2004-01-01

    as increased phosphate and urea concentrations, whereas calcium and potassium concentrations decreased significantly after bowel preparation. No differences in plasma or extracellular volumes were seen. Orthostatic tolerance and balance function did not change after bowel preparation. CONCLUSIONS: Bowel...

  5. Preparing for Emergency Situations

    Science.gov (United States)

    Asproth, Viveca; Amcoff Nyström, Christina

    2010-11-01

    Disaster relief can be seen as a dynamic multi actor process with actors both joining and leaving the relief work during the help and rescue phase after the disaster has occurred. Actors may be governmental agencies, non profit voluntary organisations or spontaneous helpers comprised of individual citizens or temporal groups of citizens. Hence, they will vary widely in agility, competence, resources, and endurance. To prepare for for disasters a net based Agora with simulation of emergency situations for mutual preparation, training, and organisational learning is suggested. Such an Agora will ensure future security by: -Rising awareness and preparedness of potential disaster responders by help of the components and resources in the netAgora environment; -Improving cooperation and coordination between responders; -Improving competence and performance of organisations involved in security issues; -Bridging cultural differences between responders from different organizations and different backgrounds. The developed models are intended to reflect intelligent anticipatory systems for human operator anticipation of future consequences. As a way to catch what should be included in this netbased Agora and to join the split pictures that is present, Team Syntegrity could be a helpful tool. The purpose of Team Syntegrity is to stimulate collaboration and incite cross fertilization and creativity. The difference between syntegration and other group work is that the participants are evenly and uniquely distributed and will collectively have the means, the knowledge, the experience, the perspectives, and the expertise, to deal with the topic. In this paper the possibilities with using Team Syntegrity in preparation for the development of a netbased Agora is discussed. We have identified that Team Syntegrity could be useful in the steps User Integration, Designing the netAgora environment, developing Test Scenarios, and assessment of netAgora environment.

  6. Preparation of tungsten oxide

    Science.gov (United States)

    Bulian, Christopher J.; Dye, Robert C.; Son, Steven F.; Jorgensen, Betty S.; Perry, W. Lee

    2009-09-22

    Tungsten trioxide hydrate (WO.sub.3.H.sub.2O) was prepared from a precursor solution of ammonium paratungstate in concentrated aqueous hydrochloric acid. The precursor solution was rapidly added to water, resulting in the crash precipitation of a yellow white powder identified as WO.sub.3.H.sub.2O nanosized platelets by x-ray diffraction and scanning electron microscopy. Annealing of the powder at 200.degree. C. provided cubic phase WO.sub.3 nanopowder, and at 400.degree. C. provided WO.sub.3 nanopowder as a mixture of monoclinic and orthorhombic phases.

  7. End-preparation assessments and tests for compounded sterile preparations.

    Science.gov (United States)

    McElhiney, Linda F

    2013-01-01

    Outsourcing has become a necessity to obtain sterile products that are currently on backorder. Because of the expense of outsourcing sterile compounding, pharmacy leadership in health systems are now considering the option of insourcing and batch preparing compounded sterile preparations, which can be a viable option for a health system. It can significantly decrease drug-spending costs, and the pharmacy has a complete record of the compounding process. The key to preparing high-quality, safe, sterile preparations and meeting United States Pharmacopeia standards is end-preparation assessments and tests.

  8. Prepare Healthy Foods with Toddlers

    Science.gov (United States)

    Izumi-Taylor, Satomi; Rike, Cheryl

    2011-01-01

    Toddlers--from about 16 to 36 months--can learn a variety of skills as they prepare food and follow recipes in developmentally appropriate ways. Early childhood teachers are encouraged to support young children's healthy eating habits by offering simple food preparation experiences. When toddlers--and preschoolers--safely prepare healthy snacks,…

  9. Why Specialized Preparation is Critical.

    Science.gov (United States)

    McEwin, C. Kenneth; Dickinson, Thomas S.; Smith, Tracy W.

    2003-01-01

    Asserts that mandating specific teacher preparation programs may be necessary to ensure that teachers are adequately prepared for the unique challenges and rewards of teaching young adolescents, discussing: the desirability of teacher young adolescents, important elements of teacher preparation, the need for tighter licensure requirements, and the…

  10. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2007-01-01

    The Department of Human Resources is organising a preparation for retirement seminar which will take place on the four successive afternoons of 2 to 5 October 2007. Similar seminars in the past have always proved highly successful. Retirement marks the end of one’s working life and the start of a new period of life. This period of transition and change is experienced differently from one individual to another. In any case, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above as well as those who have retired during the year have been sent a personal invitation to attend. Spouses are welcome. Staff members below 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to availability of places. Registration: In view of the number of people concerned and the limited capacity of th...

  11. Preparation for retirement seminar

    CERN Multimedia

    HR Department

      The Human Resources Department is organizing a preparation for retirement seminar, which will take place on the afternoons of the 25 and 27 November 2009. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members under the age of 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to the availability of places. Registration: In view of the number of people concerned and the limited capacity of the Main Auditorium, you are requested to register in advance via Indico. &a...

  12. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2011-01-01

    The Human Resources Department is organizing a Preparation for Retirement Seminar, which will take place on 18 and 21 October 2011 in the afternoon in the Main Auditorium and on 19 October and 15 and 16 November 2011 in the afternoon in the Council Chamber. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members under the age of 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to availability of places. Registration: In view of the number of people concerned, you are ...

  13. Preparation for Retirement Seminar

    CERN Multimedia

    HR Department

    2011-01-01

    The Human Resources Department is organizing a Preparation for Retirement Seminar, which will take place on 18 and 21 October 2011 in the afternoon in the Main Auditorium and on 19 October and 15 and 16 November 2011 in the afternoon in the Council Chamber. Similar seminars in the past have always proved highly successful. Retirement marks the end of a person’s working life and the start of a new chapter. This period of transition is experienced differently from one individual to another. In all cases, being well-informed and prepared greatly facilitates the change in lifestyle. We would like to draw your attention to the following information: Staff concerned: All staff members aged 58 and above have been sent a personal invitation to attend. Spouses are welcome. Staff members under the age of 58 who are interested in attending the seminar may also apply. Their applications will be accepted subject to availability of places. Registration: In view of the number of people concerned, you are r...

  14. PREPARATION FOR RETIREMENT PROGRAMME

    CERN Multimedia

    Human Resources Division

    2001-01-01

    27 March 2001 from 2.00 p.m. to 5.30 p.m. 28 March 2001 from 2.00 p.m. to 5.30 p.m. 29 March 2001 from 2.00 p.m. to 5.30 p.m. 30 March 2001 from 2.00 p.m. to 4.45 p.m. Auditorium (Main Building) After the success of the preparation seminars held in recent years, it has been decided that the programme should continue. The forthcoming seminar has been prepared in close collaboration with the CERN Pensioners' Association. The programme will be organised over several half-day sessions. Once again this year, a special session will be devoted to the 10th revision of the Swiss state pension scheme, the 'AVS' (Assurance-Vieillesse et Survivants), and the consequences for international civil servants. A talk will be given by Mrs Danièle Siebold, Director of the Caisse Cantonale Genevoise de Compensation, aimed mainly at those residing in or intending to move to Switzerland, or who worked in Switzerland before joining CERN. To enable Mrs Siebold to respond to your concerns as effectively as possible, please ...

  15. Data Breach Preparation

    Energy Technology Data Exchange (ETDEWEB)

    Belangia, David Warren [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-03-13

    The Home Depot Data Breach is the second largest data breach on record. It has or will affect up to 56 million debit or credit cards. A trusted vendor account, coupled with the use of a previously unknown variant of malware that allowed the establishment of a foothold, was the entry point into the Home Depot network. Once inside the perimeter, privilege escalation provided an avenue to obtain the desired information. Home Depot did, however, learn some lessons from Target. Home Depot certainly communicated better than Target, procured insurance, and instituted as secure an environment as possible. There are specific measures an institution should undertake to prepare for a data breach, and everyone can learn from this breach. Publicly available information about the Home Depot Data Breach provides insight into the attack, an old malware variant with a new twist.While the malware was modified as to be unrecognizable with tools, it probably should have been detected. There are also concerns with Home Depot’s insurance and the insurance provider’s apparent lack of fully reimbursing Home Depot for their losses. The effect on shareholders and Home Depot’s stock price was short lived. This story is still evolving but provides interesting lessons learned concerning how an organization should prepare for it inevitable breach.

  16. Preparing Students for Globalization

    DEFF Research Database (Denmark)

    Friesel, Anna

    2010-01-01

    : USA, China, Korea, Mexico, Chile and others. We describe our experiences of working on industrial projects with international teams and analyse the development and trends in student mobility. The growing popularity of these programmes and the increasing number of the students joining our international......A. Friesel. Preparing Students for Globalization Working with International Teams with Projects // Electronics and Electrical Engineering. - Kaunas: Technologija, 2019. - No. 6(102). - P. 111-114. This paper summarizes the activities, contents and overall outcomes of our experiences...... with international students studying at the Copenhagen University College of Engineering (in short - IHK); in particular students coming for one semester exchange program under Erasmus-programme. IHK's participation in EU-supported programmes like EIE-Surveyor and ELLEIEC, both ERASMUS thematic networks, have...

  17. Preparing for faster filling

    CERN Multimedia

    CERN Bulletin

    2010-01-01

    Following the programmed technical stop last week, operators focussed on preparing the machine for faster filling, which includes multibunch injection and a faster pre-cycle phase.   The LHC1 screen shot during the first multibunch injection operation. The LHC operational schedule incorporates a technical stop for preventive maintenance roughly every six weeks of stable operation, during which several interventions on the various machines are carried out. Last week these included the replacement of a faulty magnet in the SPS pre-accelerator, which required the subsequent re-setting of the system of particle extraction and transfer to the LHC. At the end of last week, all the machines were handed back for operation and work could start on accommodating all the changes made into the complex systems in order for normal operation to be resumed. These ‘recovery’ operations continued through the weekend and into this week. At the beginning of this week, operators succeeded in pro...

  18. Method to prepare Semtex

    Energy Technology Data Exchange (ETDEWEB)

    Alcaraz, A; Dougan, A

    2006-11-26

    This procedure requires the binder and uncoated RDX be prepared in separate steps, see Figure 1: (1) The binder and dye are mixed by agitation with a water-insoluble organic solvent (e.g., toluene), I; (2) The RDX/PETN is agitated thoroughly with water, II; (3) The binder solution I is added to the RDX/water mixture at II with thorough mixing to form a slurry III; (4) In the next step the solvent is distilled off at IV leaving resulting granules; (5) The next step is followed by filtration at V, which may be done by vacuum; (6) The composition is then dried at VI to a dough-like consistency.

  19. Premedication, preparation, and surveillance.

    Science.gov (United States)

    Bell, G D

    2002-01-01

    peppermint oil, as well as the value of variable-stiffness colonoscopes, in reducing the need for intravenous sedation is discussed. Case reports of hyponatraemic encephalopathy and hypocalcaemic tetany as complications of oral bowel preparation are presented, as is the challenge associated with adequate bowel preparation in diabetic patients.

  20. Psychological preparation in sport shooting

    OpenAIRE

    Ledecká, Kateřina

    2013-01-01

    Title: Psychological preparation in sport shooting Objectives: The objective of this thesis is usage of psychological preparation by sport shooting representation team in Czech Republic. How they are informed about psychological preparation. What it means to them. Which types of regulation they use and how they behave before and after a competition. Methods: A Questionnaire was used as a method for data obtaining. The questionnaire was compiled for the purposes of this Thesis. The researched ...

  1. Preoperative preparation of children

    Directory of Open Access Journals (Sweden)

    Priya Reshma Aranha

    2017-01-01

    Full Text Available Surgery is a stressful and anxiety provoking experience for children. Millions of children undergo surgery every year. The majority of children experience significant preoperative anxiety which intern can affect their recovery. Preoperative anxiety may bring about physical and physiological changes in children, which can be particularly evident in terms of increased heart rate and blood pressure. To identify various strategies used to minimize the preoperative anxiety of children and update their clinical effectiveness among children undergoing surgery, the authors searched PubMed, MEDLINE, CINAHL, ScienceDirect, Google Scholar, Scopus, and Cochrane Library for identifying the relevant studies and retrieved available literature. It is concluded that utilization of the strategies available to reduce the preoperative anxiety of children will be a promising intervention to reduce anxiety, to promote relaxation, satisfaction, and speedy recovery. Many of these techniques are simple, cost-effective and can be easily carried out by nurses. It is essential to use the age appropriate and individualized methods in preparing children for surgery. Further research is required to strengthen the evidence.

  2. Preparation for retirement seminar

    CERN Multimedia

    HR Department

    2010-01-01

    (Health insurance and wealth and succession planning) During the preparation for retirement seminar in November 2009, the sessions on health insurance in Switzerland and in France unfortunately had to be postponed. Participants in the seminar also expressed interest in an information session on “How to manage your wealth and organize your succession”. The sessions on health insurance will be held on 16 March 2010 and those on managing wealth and succession on 18 March 2010. Programme for Tuesday 16 March 2010 (TH Theory Conference Room, Building 4/3-006): 09:00 Health insurance in Switzerland by Mr. Sandro Breitenstein, Service de l'Assurance Maladie du Canton de Genève 10:00 Coffee break 10:20 Health insurance in France by Mr. Dominique Curtiaud, Caisse Primaire d'Assurance Maladie de l'Ain Programme for Thursday 18 March 2010 (TH Theory Conference Room, Building 4/3-006): 09:00 How to manage your wealth and organize your succession in Switzerland by Mr. Jean-Marc W...

  3. Preparing for the future

    CERN Multimedia

    Panos Charitos

    2016-01-01

    The second annual meeting of the Future Circular Collider (FCC) design study took place from 11 to 15 April in Rome.   The participants in the second annual meeting of the FCC design study. (Photo: Vinicio Tullio/INFN) More than 450 scientists, researchers and leaders of high-tech industry gathered in Rome to review the progress of the Future Circular Collider (FCC) design study. The study was kicked off in 2014 as a response to a statement in the European Strategy for Particle Physics, and today embraces 74 institutes from 26 countries. With the LHC programme well under way, particle physicists are at an exciting juncture. New results from the 13 TeV run could show that we are on the threshold of an eye-opening era that presents new challenges and calls for developments. “To prepare for its future, CERN should continue to develop a vibrant R&D programme that should take advantage of its strengths and uniqueness, pursue design studies for...

  4. Prepared for internship?

    LENUS (Irish Health Repository)

    Abuhusain, H

    2009-03-01

    Preparedness of medical school graduates for the intern year is one of the emphasised objectives of undergraduate medical training. We have evaluated the perceived preparedness of graduates undertaking the intern year in the Republic of Ireland. A 9-page questionnaire was mailed to all 497 interns in Ireland following commencement of the intern year in July 2005. Data obtained included demographics, perceived preparedness and assessment of perceived clinical skills (four sub-domains: core competencies, communication, emergencies, and educational environment). Information on intern induction was also collected. 99 questionnaires were returned (19.9%). Most of the cohort were Irish and worked in large medical school teaching hospitals. The majority of interns felt \\'unprepared\\' for the intern year. Interns perceived themselves \\'poor\\' in all areas of clinical skills assessed. Intern induction was attended by the majority and most stated it was too short. Medical schools are actively seeking innovative methods, through early patient contact and sub-internships, to better prepare undergraduates for the intern year. The deficiencies identified in this study are significant and emphasise the need for continued reform in the undergraduate curriculum.

  5. Deterministic joint remote state preparation

    Energy Technology Data Exchange (ETDEWEB)

    An, Nguyen Ba, E-mail: nban@iop.vast.ac.vn [Center for Theoretical Physics, Institute of Physics, 10 Dao Tan, Ba Dinh, Hanoi (Viet Nam); Bich, Cao Thi [Center for Theoretical Physics, Institute of Physics, 10 Dao Tan, Ba Dinh, Hanoi (Viet Nam); Physics Department, University of Education No. 1, 136 Xuan Thuy, Cau Giay, Hanoi (Viet Nam); Don, Nung Van [Center for Theoretical Physics, Institute of Physics, 10 Dao Tan, Ba Dinh, Hanoi (Viet Nam); Physics Department, Hanoi National University, 334 Nguyen Trai, Thanh Xuan, Hanoi (Viet Nam)

    2011-09-26

    We put forward a new nontrivial three-step strategy to execute joint remote state preparation via Einstein-Podolsky-Rosen pairs deterministically. At variance with all existing protocols, in ours the receiver contributes actively in both preparation and reconstruction steps, although he knows nothing about the quantum state to be prepared. -- Highlights: → Deterministic joint remote state preparation via EPR pairs is proposed. → Both general single- and two-qubit states are studied. → Differently from all existing protocols, in ours the receiver participates actively. → This is for the first time such a strategy is adopted.

  6. Cavity preparation machine for the standardization of in vitro preparations

    Directory of Open Access Journals (Sweden)

    Carlos José Soares

    2008-09-01

    Full Text Available Several in vitro studies employ the confection of cavity preparations that are difficult to standardize by means of manual high speed handpieces. This study presents the development of a cavity preparation machine designed to standardize in vitro cavity preparations. A metal base of 25 mm x 25 mm x 4 mm (length x width x height was coupled to a small mobile table which was designed to be able to move by means of two precision micrometers (0.01-mm accuracy in the horizontal directions (right-left, and back-front. A high speed handpiece was coupled to a metallic connecting rod which had an accurate dial indicator enabling control of the vertical movement. The high speed handpiece is also able to move 180° around its longitudinal axis and 360° around its transversal axis. The suggested cavity preparation machine precisely helps in the standardization of cavity preparations for in vitro studies.

  7. Cavity preparation machine for the standardization of in vitro preparations.

    Science.gov (United States)

    Soares, Carlos José; Fonseca, Rodrigo Borges; Gomide, Henner Alberto; Correr-Sobrinho, Lourenço

    2008-01-01

    Several in vitro studies employ the confection of cavity preparations that are difficult to standardize by means of manual high speed handpieces. This study presents the development of a cavity preparation machine designed to standardize in vitro cavity preparations. A metal base of 25 mm x 25 mm x 4 mm (length x width x height) was coupled to a small mobile table which was designed to be able to move by means of two precision micrometers (0.01-mm accuracy) in the horizontal directions (right-left, and back-front). A high speed handpiece was coupled to a metallic connecting rod which had an accurate dial indicator enabling control of the vertical movement. The high speed handpiece is also able to move 180 degrees around its longitudinal axis and 360 degrees around its transversal axis. The suggested cavity preparation machine precisely helps in the standardization of cavity preparations for in vitro studies.

  8. Coal preparation. Energy program report

    Energy Technology Data Exchange (ETDEWEB)

    Anastas, M.Y.

    1975-06-01

    This is one of several special reports prepared in conjunction with a broad state-of-the-art study on underground coal mining. This report is essentially a review of the current technology of coal preparation and future research needs in this field. (GRA)

  9. Preparing Students for Romantic Relationships

    Science.gov (United States)

    Weissbourd, Richard; Peterson, Amelia; Weinstein, Emily

    2014-01-01

    One of the most important aspects in our lives is learning how to have mutual, caring romantic relationships. Yet while schools and many other industries in this country devote tremendous attention and resources to preparing the young for work, they do remarkably little to prepare them for generous, self-respecting sex and love. Educators and…

  10. Recent advances in preparative electrophoresis

    Science.gov (United States)

    Mosher, Richard A.; Thormann, Wolfgang; Egen, Ned B.; Couasnon, Pascal; Sammons, David W.

    1987-01-01

    Various approaches for preparative electrophoresis, and three new instruments for preparative electrophoresis are discussed. Consideration is given to isoelectric focusing, isotachophoresis, and zone electrophoresis, three gel-based electrophoresis methods. The design, functions, and performance of the Elphor VaP 21 device of Hannig (1982), the shear-stabilized BIOSTREAM separator of Thompson (1983), and the recycling isoelectric focusing device are described.

  11. Teacher Preparation and Student Achievement

    Science.gov (United States)

    Boyd, Donald J.; Grossman, Pamela L.; Lankford, Hamilton; Loeb, Susanna; Wyckoff, James

    2009-01-01

    There are fierce debates over the best way to prepare teachers. Some argue that easing entry into teaching is necessary to attract strong candidates, whereas others argue that investing in high quality teacher preparation is the most promising approach. Most agree, however, that we lack a strong research basis for understanding how to prepare…

  12. A Simple Preparation of Hexadeuteriocholesterol

    DEFF Research Database (Denmark)

    Holm, Torkil; Crossland, Ingolf

    1996-01-01

    26,26,26,27,27,27 Hxadeuterio cholesterol has been prepared in 9 stages from pregnenolone and hexadeuterio acetone with an overall yield of 7 %.......26,26,26,27,27,27 Hxadeuterio cholesterol has been prepared in 9 stages from pregnenolone and hexadeuterio acetone with an overall yield of 7 %....

  13. Preparing for climate change.

    Science.gov (United States)

    Holdgate, M

    1989-01-01

    chlorofluorocarbons (CFCs) have been released in great quantities through their use in aerosol sprays, refrigerator fluids, and insulating foams. We can get rid of CFCs and curb the pollutants generating ozone, but it will be difficult to put the brake on either methane or nitrous oxide. And the reduction in carbon dioxide emissions will demand major changes in energy policy as well as action to slow deforestation. It appears that we are already committed to rising temperatures and sea levels. The question is by how much, in which areas? A number of things can be done to prepare for these changes: Governments must recognize that there is a problem; Better models must be worked out, especially to define where the greatest impacts from climate change and sea level rise will hit; Reference scenarios must be developed to see what the impacts are likely to be in ecological, agricultural, social and economic terms; Every country should develop "avoidance strategies" to minimize risk (for example, by not building on land likely to be flooded); We must cut down on the amount of greenhouse gases released into the atmosphere from human activities, by eliminating CFCs and adopting energy conservation programs and other measures to minimize CO2 release; Global agreements to protect the atmosphere are needed.

  14. Beer as colon lavage preparation

    Energy Technology Data Exchange (ETDEWEB)

    Kinnunen, J.; Linden, H.; Pietilae, J.; Juutilainen, T.

    1987-09-01

    Six patients received beer preparation prior to double contrast barium enema. The beer group scored slightly better (though not statistically significantly) both in the cleanliness and in the mucosal coating of the bowel than the control group with standard preparation. The fluid balance was unaltered. The patients in the beer group felt surprisingly well, likely due to the good fluid and energy balance provided by the beer. The beer preparation could be used in cases, when the patients are ready to intake beer and want to maintain a good nutritional status.

  15. Adolescent test or procedure preparation

    Science.gov (United States)

    ... imagery Trying other distractions, such as listening to music through headphones, if allowed When possible, let your ... MA, Chorney JM, Mayes L. Web-based tailored intervention for preparation of parents and children for outpatient ...

  16. Preparation of large monodisperse vesicles.

    Directory of Open Access Journals (Sweden)

    Ting F Zhu

    Full Text Available Preparation of monodisperse vesicles is important both for research purposes and for practical applications. While the extrusion of vesicles through small pores (approximately 100 nm in diameter results in relatively uniform populations of vesicles, extrusion to larger sizes results in very heterogeneous populations of vesicles. Here we report a simple method for preparing large monodisperse multilamellar vesicles through a combination of extrusion and large-pore dialysis. For example, extrusion of polydisperse vesicles through 5-microm-diameter pores eliminates vesicles larger than 5 microm in diameter. Dialysis of extruded vesicles against 3-microm-pore-size polycarbonate membranes eliminates vesicles smaller than 3 microm in diameter, leaving behind a population of monodisperse vesicles with a mean diameter of approximately 4 microm. The simplicity of this method makes it an effective tool for laboratory vesicle preparation with potential applications in preparing large monodisperse liposomes for drug delivery.

  17. Preparing for Assisted Reproductive Technology

    Science.gov (United States)

    ... CDC Cancel Submit Search The CDC Assisted Reproductive Technology (ART) Note: Javascript is disabled or is not ... visit this page: About CDC.gov . Assisted Reproductive Technology (ART) What Is ART Patient Resources Preparing for ...

  18. Preparing for Breast Reconstruction Surgery

    Science.gov (United States)

    ... Cancer Breast Reconstruction Surgery Preparing for Breast Reconstruction Surgery Your surgeon can help you know what to ... The plan for follow-up Costs Understanding your surgery costs Health insurance policies often cover most or ...

  19. Remote preparation of quantum states

    CERN Document Server

    Bennett, C H; Leung, D W; Shor, P W; Winter, A; Bennett, Charles H; Hayden, Patrick; Leung, Debbie W.; Shor, Peter W.; Winter, Andreas

    2003-01-01

    Remote state preparation is the variant of quantum state teleportation in which the sender knows the quantum state to be communicated. The original paper introducing teleportation established minimal requirements for classical communication and entanglement but the corresponding limits for remote state preparation have remained unknown until now: previous work has shown, however, that it not only requires less classical communication but also gives rise to a trade-off between these two resources in the appropriate setting. We discuss this problem from first principles, including the various choices one may follow in the definitions of the actual resources. Our main result is a general method of remote state preparation for arbitrary states of many qubits, at a cost of 1 bit of classical communication and 1 bit of entanglement per qubit sent. In this "universal" formulation, these ebit and cbit requirements are shown to be simultaneously optimal by exhibiting a dichotomy. This then yields the exact trade-off c...

  20. Preparing for retirement - new seminars

    CERN Multimedia

    Human Resources Department

    2015-01-01

    We would like to take the opportunity to inform you about a new programme related to retirement, organised by the Human Resources Department. Retirement marks the end of a career and the start of a new chapter in life.  In all cases, being well-informed and prepared is necessary to cope successfully with this transition. The programme has been developed for staff members and consists of two seminars: Leaving CERN (half day seminar): short presentations by internal speakers, focusing on what options CERN offers at the end of your career: organised once per year, next session scheduled on 24 November 2015, in the afternoon, enrolment and more information on Indico.   Preparation for retirement (2-day seminar): interactive workshop (in small groups) delivered by external experts, focusing on how to prepare psychologically as well as practically to cope with all the changes retirement brings: organised regularly in 2016, in English or ...

  1. Preparation of semisynthetic (+)-tubocurarine chloride.

    Science.gov (United States)

    Naghaway, J; Soine, T O

    1979-05-01

    Semisynthetic (+)-tubocurarine chloride (II) was prepared by monoquaternization of (+)-tubocurine. The method involved treating (+)-tubocurine with a 0.5 M equivalent of hydrochloric acid prior to quaternization with methyl iodide, followed by neutralization and iodide-chloride ion-exchange. Column chromatography and crystallization procedures were utilized for pure semisynthetic II preparation. The neuromuscular junction blocking activities of the semisynthetic and commercial II were determined by the in vivo cat hypoglossal nerve-tongue muscle preparation. No delectable differences among physical constants, spectral data, and neuromuscular junction blocking activities were noted between the commercial product and the semisynthetic II. This result substantiates the chemical and biological data for the well-accepted new formula for II. The unexplained M + n14 mass spectral peaks shown by the curare-type bases are characteristic of the molecular species rather than a result of contaminants.

  2. Weierstrass preparation and algebraic invariants

    CERN Document Server

    Harbater, David; Krashen, Daniel

    2011-01-01

    We prove a form of the Weierstrass Preparation Theorem for normal algebraic curves over complete discrete valuation rings. While the more traditional algebraic form of Weierstrass Preparation applies just to the projective line over a base, our version allows more general curves. This result is then used to obtain applications concerning the values of u-invariants, and on the period-index problem for division algebras, over fraction fields of complete two-dimensional rings. Our approach uses patching methods and matrix factorization results that can be viewed as analogs of Cartan's Lemma.

  3. EFFECTIVE PROCEDURES FOR EXECUTIVE'S PREPARATION

    Directory of Open Access Journals (Sweden)

    Elisabet Martínez Mondéjar

    2014-05-01

    The aim of this article is to present methodological procedure that facilitates the executives  work with teachers that are preparing themselves to by promoting post from their  workplace from  a manual directed towards counseling executives  on how to develop the focalization, the selection and the evaluation and promotion of its teachers that are preparing themselves to by promoting post  from the work system itself  of the different levels of management from the University of Pedagogical Sciences " Felix Varela Morales " of Villa Clara.

  4. Preparation of Hydrogenated Nitrile Rubber

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Hydrogenated nitrile rubber is an oil and solvent resistant rubber and particularly give more resistant to heat, ozone, light. It is generally prepared from nitrile rubber by selective hydrogenation using a suitable catalyst system. In the present work a prepared method was adapted for the hydrogenation reaction of nitrile rubber using homogeneous tris(tri-phenlphosphine)chlorhodium(I) catalyst (RhCl(PPh3)) system. The hydrogenation reaction was carriedout at different temperature, pressure, time and catalyst concentration, the concentration, the conditions of hydrogenation are stated in table 1.

  5. Preparation of Hydrogenated Nitrile Rubber

    Institute of Scientific and Technical Information of China (English)

    LIU; ZhiCai

    2001-01-01

    Hydrogenated nitrile rubber is an oil and solvent resistant rubber and particularly give more resistant to heat, ozone, light. It is generally prepared from nitrile rubber by selective hydrogenation using a suitable catalyst system. In the present work a prepared method was adapted for the hydrogenation reaction of nitrile rubber using homogeneous tris(tri-phenlphosphine)chlorhodium(I) catalyst (RhCl(PPh3)) system.  The hydrogenation reaction was carriedout at different temperature, pressure, time and catalyst concentration, the concentration, the conditions of hydrogenation are stated in table 1.  ……

  6. Preparation and Characterization of Graphene

    Directory of Open Access Journals (Sweden)

    Xu Man

    2015-01-01

    Full Text Available The homogeneous-dispersed graphene oxide was prepared by the improved Hummers method, which would be reduced to graphene with the reducing agent called hydrazine hydrate. The X-ray diffraction, Infrared spectroscopy, Raman spectra and Transmission electron microscopy were used to analysis the phase, morphology and structure of the graphene and graphene oxide. The results show that the graphene oxide and reduced graphene oxide prepared via this method, whose degree of oxidation and reduction are high; Also obtained a higher well-disperses and less structural imperfection of the graphene that was manufactured in the reducing system that added ammonia reduction

  7. Preparing Your Child for Surgery

    Science.gov (United States)

    ... Child What Kids Say About: Handling Stress Anxiety, Fears, and Phobias Community Service: A Family's Guide to Getting Involved Teaching Kids to Be Smart About Social Media Preparing Your Child for Surgery ... Questions Explain the Problem Handle Fears Relieve Guilt Explaining What Will Happen Pre-Operative ...

  8. Professional Preparation in Health Promotion.

    Science.gov (United States)

    Hill, Charles E.; Fisher, Shirley P.

    1992-01-01

    Colleges and universities must develop curricula to prepare health promotion specialists to work with persons of all ages. Program core should include self-care, consumer awareness, nutrition, weight control, stress management, and substance abuse. Health and physical educators should learn to facilitate change of negative health behaviors into…

  9. Preparing Foster Children for School

    Science.gov (United States)

    Antoine, Karla; Fisher, Philip A.

    2006-01-01

    Preparing foster children for school entry by focusing on the skills necessary to succeed in kindergarten calls for early intervention. However, existing programs to enhance school readiness have not been tailored to meet the educational, emotional, and psychological needs of foster children. This is the rationale behind development of the…

  10. Transforming Principal Preparation. ERIC Digest.

    Science.gov (United States)

    Lashway, Larry

    In the current climate of accountability, the responsibilities of principals have increased. The new role of principals requires new forms of training, and standards-based reform is generating major changes in principal-preparation programs. This digest examines some of those changes. First, it looks at the effectiveness of principal-preparation…

  11. Preparing Teachers for Parent Involvement.

    Science.gov (United States)

    Safran, Daniel

    This paper examines the potential impact of parent involvement in the formal education of their children and suggests ways that teacher education can be restructured to prepare teachers to work with parents. This paper attempts to answer five questions: (1) Why should parents be involved in the formal education of their children? (2) Why should…

  12. Attracting and Preparing Worthy Teachers.

    Science.gov (United States)

    Shiina, Mankichi; Chonan, Mitsuo

    1993-01-01

    Attracting worthy teachers to the compulsory education system in Japan requires attention to three issues: teacher salaries, strengthening initial teacher preparation, and expansion and systemization of teacher training. The one-year beginning teachers' inservice training program began in 1989 in response to the third issue. (IAH)

  13. Standards for Art Teacher Preparation.

    Science.gov (United States)

    Henry, Carole; Banks, Sam; Day, Michael; Dunn, Phil; Fergus, Victoria; Foster, Mary Sue; Galbraith, Lynn; Hatfield, Thomas A.; Hansen, Mark; Young, Bernard

    Colleges and universities engaged in the preparation of art teachers address a broad range of issues. Questions concerning specific education requirements leading to certification, approaches to curriculum development and assessment, opportunities for clinical experiences, and exposure to teaching methodologies and classroom management strategies…

  14. Preparation from Co-cities

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ At the latest conference press held in mid of April, it is released by Chinese government officials that preparations for the Beijing Olympic Games in co-host cities are progressing well and most of the facilities are already in place.

  15. Standards for Art Teacher Preparation

    Science.gov (United States)

    National Art Education Association, 2009

    2009-01-01

    The National Art Education Association (NAEA) is committed to ensuring student access to a highly qualified, certified visual arts educator in every K-12 public school across the United States, recognizing that effective arts instruction is a core component to a 21st-century education. "Standards for Art Teacher Preparation" represents the…

  16. Preparing Student Mobility through Telecollaboration

    Science.gov (United States)

    Giralt, Marta; Jeanneau, Catherine

    2016-01-01

    In recent years, going to a foreign country has become all the more significant for Higher Education (HE) students, as concepts such as internationalisation and intercultural competencies have gained a more prominent role in HE. For students to fully benefit from this experience, it is paramount to prepare them for their stay in a foreign country…

  17. Preparing Engineers for Social Responsibility

    Science.gov (United States)

    Zandvoort, H.

    2008-01-01

    In this paper I introduce the contributions to a special section of the journal: one devoted to the question of how engineering curricula can or should contribute to the preparation of graduates for socially responsible decision making and conduct. The special section is motivated by the circumstance that, although there is broad agreement that…

  18. Preparing Students for Studying Abroad

    Science.gov (United States)

    Goldoni, Federica

    2015-01-01

    This study is situated in the fields of language education, study abroad (SA) and intercultural communication. The interest in SA is increasing on the part of students, administrators, educators, and business companies for the learning opportunities that it offers. However, SA students are not always prepared to maximize their learning…

  19. Preparing Slide Presentations on Computers.

    Science.gov (United States)

    Elberfeld, John K.

    1982-01-01

    Suggest use of well-organized slide presentation as effective way to introduce computers to large audiences and discusses how to get started--state objective, analyze audience, outline presentation, prepare slides--and equipment needed to obtain slides from television screens, miniature components, and book illustrations. References and sources…

  20. Preparation of a tritiated ginkgolide

    DEFF Research Database (Denmark)

    Strømgaard, Kristian; Suehiro, Makiko; Nakanishi, Koji

    2004-01-01

    Ginkgolide B, a constituent of the tree Ginkgo biloba, was radiolabeled with the beta-emitter tritium ([(3)H]) in two steps from ginkgolide C. First, a triflate precursor was prepared utilizing the selective reactivity of 7-OH in ginkgolide C; the triflate was then reduced with sodium borotritide...

  1. Preparation methods of alginate nanoparticles

    NARCIS (Netherlands)

    Paques, J.P.; Linden, van der E.; Rijn, van C.J.M.; Sagis, L.M.C.

    2014-01-01

    This article reviews available methods for the formation of alginate nano-aggregates, nanocapsules and nanospheres. Primarily, alginate nanoparticles are being prepared by two methods. In the “complexation method”, complex formation on the interface of an oil droplet is used to form alginate

  2. Preparation methods of alginate nanoparticles

    NARCIS (Netherlands)

    Paques, J.P.; Linden, van der E.; Rijn, van C.J.M.; Sagis, L.M.C.

    2014-01-01

    This article reviews available methods for the formation of alginate nano-aggregates, nanocapsules and nanospheres. Primarily, alginate nanoparticles are being prepared by two methods. In the “complexation method”, complex formation on the interface of an oil droplet is used to form alginate nanocap

  3. Handbook for Preparing Job Classifications.

    Science.gov (United States)

    Thomas, John C.

    To assist local governments in their responsibility for eliminating and preventing discrimination in employment based on race, color, religion, sex, or national origin as specified by the Equal Employment Opportunity Act of 1972, the handbook provides guidelines for analyzing jobs and preparing job classifications (defining; listing duties…

  4. Preparing Engineers for Social Responsibility

    Science.gov (United States)

    Zandvoort, H.

    2008-01-01

    In this paper I introduce the contributions to a special section of the journal: one devoted to the question of how engineering curricula can or should contribute to the preparation of graduates for socially responsible decision making and conduct. The special section is motivated by the circumstance that, although there is broad agreement that…

  5. Practicing Improvisation: Preparing Multicultural Educators

    Science.gov (United States)

    Hull, Karla

    2015-01-01

    Preparing competent multicultural educators involves a dynamic process requiring constant self-reflection and assisting pre-service teachers to sharpen their cultural vision as they learn to be responsive educators. Reflections on lessons learned as a teacher educator are shared through personal experiences that are identified as keys to prepare…

  6. Integrated Work Management: Preparer, Course 31883

    Energy Technology Data Exchange (ETDEWEB)

    Simpson, Lewis Edward [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-08-07

    The preparer (also called the “planner”) plays a key role in the integrated work management (IWM) process at Los Alamos National Laboratory (LANL). This course, Integrated Work Management: Preparer (COURSE 31883), describes the IWM roles and responsibilities of the preparer. This course also discusses IWM requirements that must be met by the preparer.

  7. 21 CFR 864.4400 - Enzyme preparations.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Enzyme preparations. 864.4400 Section 864.4400...) MEDICAL DEVICES HEMATOLOGY AND PATHOLOGY DEVICES Specimen Preparation Reagents § 864.4400 Enzyme preparations. (a) Identification. Enzyme preparations are products that are used in the...

  8. Abundances of C3Hx Hydrocarbons in Titan's Stratosphere from Cassini CIRS

    Science.gov (United States)

    Nixon, C. A.; Jennings, D. E.; Bezard, B.; Vinatier, S.; Teanby, N. A.; Sung, K.; Ansty, T. M.; Irwin, P. G.; Gorius, N.; Cottini, V.; Coustenis, A.; Flasar, F. M.

    2014-12-01

    During the ten years since entry into Saturn orbit in 2004, the Cassini spacecraft has made more than 100 close flybys of Titan, measuring the properties of the atmosphere by both in situ and remote sensing techniques. Cassini's Composite Infrared Spectrometer (CIRS) senses the infrared spectrum from 7-1000 μm (1400-10 cm-1), a region which exhibits the vibrational emissions of many different molecular species. CIRS has therefore been able to map the spatial distributions and temporal variations of hydrocarbons, nitriles and other gas species in Titan's atmosphere, yielding information about the chemistry and dynamics. Recently, Nixon et al. (2013) made the first detection of a new stratospheric gas species from Cassini using CIRS - the C3H6 molecule (propene). This filled in a long-time missing link in the chemical picture of Titan's lower atmosphere, since the C3H4 (propyne) and C3H8 (propane) molecules had been detected in 1981 by Voyager 1 IRIS. The inferred abundance of C3H6 is less than both C3H8 and C3H4, and this pattern is repeated also in the C2Hx molecules where C2H4 is less abundant than C2H2 and C2H6. Therefore a pattern emerges whereby: alkanes > alkynes > alkenes within the C2Hx and C3Hx chemical families in the lower stratosphere. We comment on how this trend compares to published photochemical model predictions, and also give updates on the search for C3Hx isomers (allene: CH2CCH2, and cyclopropane: c-C3H6) and C4Hx species using CIRS.

  9. Optimal preparation of graph states

    CERN Document Server

    Cabello, Adan; Lopez-Tarrida, Antonio J; Portillo, Jose R

    2010-01-01

    We show how to prepare any graph state of up to 12 qubits with: (a) the minimum number of controlled-Z gates, and (b) the minimum preparation depth. We assume only one-qubit and controlled-Z gates. The method exploits the fact that any graph state belongs to an equivalence class under local Clifford operations. We extend up to 12 qubits the classification of graph states according to their entanglement properties, and identify each class using only a reduced set of invariants. For any state, we provide a circuit with both properties (a) and (b), if it does exist, or, if it does not, one circuit with property (a) and one with property (b), including the explicit one-qubit gates needed.

  10. One-Pot Synthesis of 1,2,3-Triazoles using Polymer-Supported Propyne in Aqueous Solution

    Institute of Scientific and Technical Information of China (English)

    SHANG,Yong-Jia; REN,Lian-Bing; WANG,Dong-Mei

    2007-01-01

    A practical and efficient liquid-phase synthesis of 1,2,3-triazoles using poly(ethylene glycol) as support in aqueous solution was described. The title compounds, 1,2,3-triazoles 5 were obtained by a one-pot three-component 1,3-dipolar cycloaddition reaction in middle yields. In addition, a series of unexpected products 7 of Sonogashira reaction were also formed under the same condition.

  11. Pomegranate liquor preparation and analysis

    OpenAIRE

    Galego, Ludovina; Estevinho, Leticia M.; Silva, José Paulo

    2012-01-01

    The pomegranate (Punica granatum L.) liquor has been produced for several centuries in the south of Portugal, mainly in the mountain areas. The “Assaria” variety is the preferred cultivar due to its organoleptic properties and high arils to peel ratio. Wild pomegranates are also widely distributed but, despite the health benefits that have been associated to the fruits, they continue to be unappreciated for consumption. Liquor preparation is a very good alternative for wild pomegranate fruits...

  12. Method for preparing ceramic composite

    Science.gov (United States)

    Alexander, Kathleen B.; Tiegs, Terry N.; Becher, Paul F.; Waters, Shirley B.

    1996-01-01

    A process for preparing ceramic composite comprising blending TiC particulates, Al.sub.2 O.sub.3 particulates and nickle aluminide and consolidating the mixture at a temperature and pressure sufficient to produce a densified ceramic composite having fracture toughness equal to or greater than 7 MPa m.sup.1/2, a hardness equal to or greater than 18 GPa.

  13. Sample preparation and biopharmaceutical analysis

    OpenAIRE

    Farrelly, Gillian

    1998-01-01

    In chapter 1, an overview is given of sample preparation methods and analytical techniques in use today. Each one is discussed, and relevant examples are given. In chapter 2, the development of a method for the HPLC analysis of taurine in human plasma using acetonitrile precipitation and pre-column derivatisation with fluorescamine is presented. This procedure was found to be faster and easier to use than previous taurine assays. In chapter 3, the evaluation of novel aspirin derivativ...

  14. Ceramic veneers with minimum preparation

    OpenAIRE

    da Cunha, Leonardo Fernandes; Reis, Rachelle; Santana, Lino; Romanini, Jose Carlos; de CARVALHO, Ricardo Marins; Furuse, Adilson Yoshio

    2013-01-01

    The aim of this article is to describe the possibility of improving dental esthetics with low-thickness glass ceramics without major tooth preparation for patients with small to moderate anterior dental wear and little discoloration. For this purpose, a carefully defined treatment planning and a good communication between the clinician and the dental technician helped to maximize enamel preservation, and offered a good treatment option. Moreover, besides restoring esthetics, the restorative t...

  15. Radiation sterilization of pancreatin preparation

    Energy Technology Data Exchange (ETDEWEB)

    Kimura, Syojiro (Osaka Coll. of Pharmacy, Matsubara (Japan)); Sako, Michiyo; Kanbashi, Toshitaka; Jo, Hisanobu; Koide, Hiroaki

    1984-11-01

    The enzymatic activities (in detail, amylase-, lipase- and protease-activity) of ..gamma..-irradiated pancreatin powder preparation decrease to 50 - 95% at doses range of 50 kR - 8 MR. The dose-inactivation relation-ships vary depending on every different manufactory lot. In the case of higher moisture content preparation as irradiation sample, amylase activities are more stable, the other side, protease activities are less stable. On the variation of these activities by ..gamma..-irradiation, there are no difference between room temperature and lower temperature (-70/sup 0/C) as irradiation condition. The D/sub 10/ values of contained bacteria and fungus (contamination number: about 1 x 10/sup 3/ cells/g and 9 x 10/sup 2/ spores/g) of a pancreatin preparation are 74C/kg (280 kR) and 60 C/kg(230 kR). Then, these values are corresponded to 645 C/kg (2.5 MR) and 540 C/kg (2.1 MR) as perfect sterilization.

  16. Preparing for a dermatopathology quiz

    Directory of Open Access Journals (Sweden)

    Biju Vasudevan

    2014-01-01

    Full Text Available Dermatopathology is one of the key aspects in dermatological diagnosis and is of immense value to the practicing dermatologist as well as residents pursuing dermatology as a career. It is a visual medium of understanding the subject, and is therefore ideal to be tested similarly. Dermatopathology quiz has become a part and parcel of most scientific deliberations, and is therefore an essential requirement of the postgraduate curriculum. Preparing for a dermatopathology quiz is tougher than preparing for a normal clinical quiz because of the lesser importance given for it in the syllabus of postgraduation and also due to the lack of resources either in getting microscopic sessions arranged or due to lack of flair of the subject compared to cosmetology or dermatosurgery. This review was done with the purpose of educating both the students and quizmasters as to how to prepare for a dermatopathology quiz. It is a unique proposal and, therefore, is gathered from more of personal experience, experience gained from watching quizzes conducted by experienced quizmasters, and also from the advice gained from masters of the subject in relation to the quiz.

  17. PREPARATION FOR RETIREMENT - AVS SEMINAR

    CERN Multimedia

    Social Service

    2001-01-01

    The 500 or so participants in the fifth Preparation for Retirement seminar held at the end of March were unfortunately deprived of the planned session on the AVS due to the unavailability of the Director of the Caisse Cantonale Genevoise de Compensation (CCGC). We have since had formal confirmation that because of an extra workload due to important changes in the Swiss tax and social legislation and the implementation this summer of the maternity insurance in Geneva, the CCGC has suspended its participation in preparation for retirement seminars in the international organisations for the time being. Conscious of the necessity of offering a session dedicated to the AVS, it is with pleasure that we can inform you that one of our legal advisers, Mr Lorenz Stampfli, has accepted to lead this session. In order to allow for adequate preparation we have reserved the following date: Wednesday 26 September from 14.00 to 16.00 in the Main Amphitheatre The session will be open to all people already registered and any o...

  18. Rationale for designing cavity preparations.

    Science.gov (United States)

    Laswell, H R; Welk, D A

    1985-04-01

    Increased resistance to caries, increased dental awareness, superior diagnostic capabilities, better illumination, optical aids that significantly enhance vision, improved and standardized materials for restoration, and a deeper understanding of the caries process enable a far more conservative approach to tooth preparation. The dentist can concentrate on preserving as much sound tooth structure as possible with less attention being devoted to resistance and retention form that previously demanded in bulk restorations and massive channels and locks that are no longer appropriate. Although caries inhibitory effects have been shown with materials such as silicate cement, glass ionomers, and resins that leach fluoride, in general, dentists should not rely on restorative materials to inhibit the development of future decay. Characteristics of the carious lesion are unique for each tooth according to many factors centering around the plaque pattern for that tooth and not according to zones of natural susceptibility or immunity strictly dictated by morphology. Therefore, no single cavity preparation duplicated from a textbook is likely to be satisfactory for an individual tooth. Furthermore, novices learning the subject of cavity preparation often leave decalcified enamel when they attempt to replicate under clinical conditions that which they have learned in technique courses. This is the major invitation to future caries reappearing adjacent to restorations. Also, failure to duplicate the exact morphology of the tooth surface that has been replaced is likely to alter the pattern of plaque accumulation and create other caries prone areas.(ABSTRACT TRUNCATED AT 250 WORDS)

  19. Sample Preparation for Bioanalytical and Pharmaceutical Analysis.

    Science.gov (United States)

    Clark, Kevin D; Zhang, Cheng; Anderson, Jared L

    2016-12-06

    Biological and pharmaceutical samples represent formidable challenges in sample preparation that hold important consequences for bioanalysis and genotoxic impurity quantification. This Feature will emphasize significant advances toward the development of rapid, sensitive, and selective sample preparation methods.

  20. A Simple Preparation Method for Diphosphoimidazole

    DEFF Research Database (Denmark)

    Rosenberg, T.

    1964-01-01

    A simple method for the preparation of diphosphoimidazole is presented that involves direct phosphorylation of imidazole by phosphorus oxychloride in alkaline aqueous solution. Details are given on the use of diphosphoimidazole in preparing sodium phosphoramidate and certain phosphorylated amino...

  1. Preparation and characterization of antigenic properties of ...

    African Journals Online (AJOL)

    PRECIOUS

    2009-12-15

    Dec 15, 2009 ... A rapid, simple and low cost procedure for preparing hapten-protein conjugates was developed using .... using a GS-800 Calibrated Densitometer (Bio-rad, USA). .... is to develop a method to prepare effective immunogens.

  2. Method of surface preparation of niobium

    Science.gov (United States)

    Srinivasan-Rao, Triveni; Schill, John F.

    2003-01-01

    The present invention is for a method of preparing a surface of niobium. The preparation method includes polishing, cleaning, baking and irradiating the niobium surface whereby the resulting niobium surface has a high quantum efficiency.

  3. FFTF operations procedures preparation guide. Revision 2

    Energy Technology Data Exchange (ETDEWEB)

    1976-12-01

    The Guide is intended to provide guidelines for the initial preparation of FFTF Operating Procedures. The Procedures Preparation Guide was developed from the plan presented and approved in the FFTF Reactor Plant Procedures Plan, PC-1, Revision 3.

  4. 40 CFR 1502.6 - Interdisciplinary preparation.

    Science.gov (United States)

    2010-07-01

    ... § 1502.6 Interdisciplinary preparation. Environmental impact statements shall be prepared using an inter-disciplinary approach which will insure the integrated use of the natural and social sciences and...

  5. Rhenium Nanochemistry for Catalyst Preparation

    Directory of Open Access Journals (Sweden)

    Vadim G. Kessler

    2012-08-01

    Full Text Available The review presents synthetic approaches to modern rhenium-based catalysts. Creation of an active center is considered as a process of obtaining a nanoparticle or a molecule, immobilized within a matrix of the substrate. Selective chemical routes to preparation of particles of rhenium alloys, rhenium oxides and the molecules of alkyltrioxorhenium, and their insertion into porous structure of zeolites, ordered mesoporous MCM matrices, anodic mesoporous alumina, and porous transition metal oxides are considered. Structure-property relationships are traced for these catalysts in relation to such processes as alkylation and isomerization, olefin metathesis, selective oxidation of olefins, methanol to formaldehyde conversion, etc.

  6. STS Interventions: Preparing, Defending, Learning

    Directory of Open Access Journals (Sweden)

    Brian Martin

    2016-06-01

    Full Text Available Intervening in the Australian vaccination debate, I found that STS perspectives helped me understand the controversy but gave little guidance on how to defend against attacks. Max Liboiron comments that preparation, including support networks, should precede interventions. I was well supported in my involvement in the vaccination debate, but those who openly advocate a stigmatized view may have difficulty gaining support. Teun Zuiderent-Jerak asks what is being learned when interventions reinforce existing categories. Controversy participants can learn by being exposed to STS perspectives; controversy researchers, when attacked, can gain new information and develop new research ideas.

  7. [CORPSE CONSERVATION: ATTILIO MAGGIA'S PREPARATIONS].

    Science.gov (United States)

    Porro, Alessandro; Franchini, Antonia Francesca; Galimberti, Paolo M; Lorusso, Lorenzo; Falconi, Bruno

    2015-01-01

    The authors analyze Attilio Maggia's method of corpse conservation. His method was based on development of formaline vapours and preservation of corpse into a hermetically closed coffin (U.S.Patent 1150688 - Aug. 17, 1915). The corpses preserved could also be hardened after the treatment, exposing them to the air. Attilio Maggia (1864-1945) treated the corpse of italian writer Giovanni Verga (1840-1922). Some Maggia's preparations were preserved into obstetrical museum at Milan University: they are lost, but some records remain (an old inventory register) and attest us the industry of this physician.

  8. Preparation of Manganese Oxide Nanobelts

    Institute of Scientific and Technical Information of China (English)

    Jisen WANG; Jinquan SUN; Ying BAO; Xiufang BIAN

    2003-01-01

    Oriented nanobelts of manganese oxide have been firstly and successfully prepared by a microemulsion techniqueunder controlled circumstances. The samples were characterized by X-ray diffraction (XRD), transmission electronmicroscope (TEM). Influences of sodium chloride and annealed temperature on the synthesis of Mn3O4 nanobeltswere investigated. It was found that NaCl is the key factor to synthesize oriented Mn3O4 nanobelts and 827 K isoptimum temperature to produce fine nanobelts. Oriented growth mechanism of Mn3O4 nanobelts was discussed.

  9. Trends in mask data preparation

    Science.gov (United States)

    Fujimura, Aki; Pang, Liyong; Su, Bo; Choi, Yohan

    2014-10-01

    Whether for VSB mask writing or for multibeam mask writing, the shapes we need to write on masks are increasingly complex, increasingly curvilinear, and smaller in minimum width and space. The overwhelming trend in mask data preparation (MDP) is the shift from deterministic, rule-based, geometric, context-independent, shape-modulated, rectangular processing to statistical, simulation-based, context-dependent, dose- and shape-modulated any-shape processing. The paper briefly surveys the history of MDP, and explains through a simulation-based study that 50nm line and space is the tipping point where rule-based processing gives away to simulation-based processing.

  10. Carbonaceous Chondrite Thin Section Preparation

    Science.gov (United States)

    Harrington, R.; Righter, K.

    2017-01-01

    Carbonaceous chondrite meteorites have long posed a challenge for thin section makers. The variability in sample hardness among the different types, and sometimes within individual sections, creates the need for an adaptable approach at each step of the thin section making process. This poster will share some of the procedural adjustments that have proven to be successful at the NASA JSC Meteorite Thin Section Laboratory. These adjustments are modifications of preparation methods that have been in use for decades and therefore do not require investment in new technology or materials.

  11. Ceramic veneers with minimum preparation.

    Science.gov (United States)

    da Cunha, Leonardo Fernandes; Reis, Rachelle; Santana, Lino; Romanini, Jose Carlos; Carvalho, Ricardo Marins; Furuse, Adilson Yoshio

    2013-10-01

    The aim of this article is to describe the possibility of improving dental esthetics with low-thickness glass ceramics without major tooth preparation for patients with small to moderate anterior dental wear and little discoloration. For this purpose, a carefully defined treatment planning and a good communication between the clinician and the dental technician helped to maximize enamel preservation, and offered a good treatment option. Moreover, besides restoring esthetics, the restorative treatment also improved the function of the anterior guidance. It can be concluded that the conservative use of minimum thickness ceramic laminate veneers may provide satisfactory esthetic outcomes while preserving the dental structure.

  12. Dissipative preparation of entanglement in optical cavities

    DEFF Research Database (Denmark)

    Kastoryano, Michael James; Reiter, Florentin; Sørensen, Anders Søndberg

    2011-01-01

    We propose a novel scheme for the preparation of a maximally entangled state of two atoms in an optical cavity. Starting from an arbitrary initial state, a singlet state is prepared as the unique fixed point of a dissipative quantum dynamical process. In our scheme, cavity decay is no longer...... as compared to preparation protocols based on coherent unitary dynamics...

  13. Preparation for your Foreign Learning Experience

    NARCIS (Netherlands)

    Jos Walenkamp; Manuela Hernandez

    2012-01-01

    It is a well-known fact that a good preparation in the pre-departure stage can maximize the chances of a succesful foreign experience. But what is meant by a good preparation? And what are the expected results of such a preparation? This course focuses in internship and study abroad (pre-departure)

  14. Preparation for your Foreign Learning Experience

    NARCIS (Netherlands)

    Manuela Hernandez; Jos Walenkamp

    2015-01-01

    It is a well-known fact that a good preparation in the pre-departure stage can maximize the chances of a succesful foreign experience. But what is meant by a good preparation? And what are the expected results of such a preparation? This course focuses in internship and study abroad (pre-departure)

  15. How to select BCAA preparations.

    Science.gov (United States)

    Kato, Akinobu; Suzuki, Kazuyuki

    2004-12-01

    In Japan, oral branched-chain amino acid (BCAA) preparations are used in nutritional therapy for correcting disorders of protein and amino acid metabolism in patients with liver cirrhosis. There are two forms of oral BCAA preparations: enteral nutrition products for liver failure (or elemental nutrition products for liver cirrhosis) and oral BCAA granular products. Granular products are indicated for patients with uncompensated liver cirrhosis who have no dietary restriction and hypoproteinemia. Enteral nutrition products are indicated for patients who have a history of hepatic encephalopathy and exhibit protein intolerance. In clinical practice, the existence of protein intolerance in patients with uncompensated liver cirrhosis should be determined based on a history of hepatic encephalopathy and blood ammonia concentration. When patients exhibit protein intolerance, they are given a low protein diet (approximately 0.5-1.0g/kg/day) with enteral nutrition products for liver failure. However, when patients consume adequate amounts of a well-balanced diet and ammonia concentration does not increase, it is possible to control their condition with granular products. However, when patients cannot achieve an adequate dietary intake, it is recommended that enteral nutrition products should be used in order to improve nutritional status, even if these patients do not have a history of encephalopathy.

  16. Preparation and Crystallization of Riboswitches.

    Science.gov (United States)

    Peselis, Alla; Gao, Ang; Serganov, Alexander

    2016-01-01

    Recent studies have revealed that the majority of biological processes are controlled by noncoding RNAs. Among many classes of noncoding RNAs, metabolite-sensing segments of mRNAs called riboswitches are unique. Discovered over a decade ago in all three kingdoms of life, riboswitches specifically and directly interact with various metabolites and regulate expression of multiple genes, often associated with metabolism and transport of small molecules. Thus, riboswitches do not depend on proteins for binding to small molecules and play a role as both metabolite sensors and effectors of gene control. Riboswitches are typically located in the untranslated regions of mRNAs where they form alternative structures in the presence and absence of the ligand and modulate expression of genes through the formation of regulatory elements. To understand the mechanism of the riboswitch-driven gene control, it is important to elucidate how riboswitches interact with cognate and discriminate against non-cognate ligands. Here we outline the methodology to synthesize riboswitch RNAs and prepare riboswitch-ligand complexes for crystallographic and biochemical studies. The chapter describes how to design, prepare, and conduct crystallization screening of riboswitch-ligand complexes. The methodology was refined on crystallographic studies of several riboswitches and can be employed for other types of RNA molecules.

  17. MUET Preparation Language Learning Strategies

    Directory of Open Access Journals (Sweden)

    Yoong Li Kuen

    2012-01-01

    Full Text Available The main objective of the study was to examine the English language learning strategies (LLS used by Lower Six students in secondary schools who are sitting for their MUET test. It analyzed the language learning strategies that students use in order to prepare for the MUET test. Data were collected using a survey questionnaire with 300 students. The instrument used in this study called “MUET Preparation Language Strategy Use Inventory” is an adapted and bilingual questionnaire designed by Cohen, Oxford and Chi (2005 known as Language Strategy Use Inventory. Forty items were analyzed and they comprised of the four skills tested in MUET which is listening, speaking, reading and writing. Data were analyzed by performing frequency analysis. The findings revealed that the listening skill is the most frequently used, while the writing skill is the least frequently used. Only the listening skill has high frequency of use, while the reading, speaking and writing skills fall under the range of moderate frequency of use. There were variations in responses with regard to the use of LLS among Form Six students in secondary schools. The findings had practical implications.

  18. Preparation of hydrophobic organic aeorgels

    Science.gov (United States)

    Baumann, Theodore F.; Satcher, Jr., Joe H.; Gash, Alexander E.

    2007-11-06

    Synthetic methods for the preparation of hydrophobic organics aerogels. One method involves the sol-gel polymerization of 1,3-dimethoxybenzene or 1,3,5-trimethoxybenzene with formaldehyde in non-aqueous solvents. Using a procedure analogous to the preparation of resorcinol-formaldehyde (RF) aerogels, this approach generates wet gels that can be dried using either supercritical solvent extraction to generate the new organic aerogels or air dried to produce an xerogel. Other methods involve the sol-gel polymerization of 1,3,5 trihydroxy benzene (phloroglucinol) or 1,3 dihydroxy benzene (resorcinol) and various aldehydes in non-aqueous solvents. These methods use a procedure analogous to the one-step base and two-step base/acid catalyzed polycondensation of phloroglucinol and formaldehyde, but the base catalyst used is triethylamine. These methods can be applied to a variety of other sol-gel precursors and solvent systems. These hydrophobic organics aerogels have numerous application potentials in the field of material absorbers and water-proof insulation.

  19. Preparing Mathematical Equations in a Document Preparation Environment

    Institute of Scientific and Technical Information of China (English)

    郑民; 卢金鑫

    1994-01-01

    WITS-Math is a mathematical equation formatting tool in WITS,a multilingual document preparation environment.WITS-Math includes a library manager and an equation formatter.The main task of WITS-Math is to format diversities of mathematical equations and organize them into an equation library used by other tools in the WITS environment.WITS-Math is a direct manipulation mathematics editor.It uses syntax directed markup language as the internal representation,and provides an interactive WYSI-WYG interface for users to format equations.WITS-Math provides an equation access mechanism.Other tools can access equations in a library br cross-reference from a source file or through data exchange without knowing the structure of equation libraries.The common data structure and the rendering object in the WITS platform ensure that the formatted equations can be directly used by other tools.

  20. Preparation of Bauxite Ceramic Microsphere

    Institute of Scientific and Technical Information of China (English)

    CHENG Xiaosu; LIU Pingan; LI Xiuyan; SHUI Anze; ZENG Lingke

    2007-01-01

    Ceramic microspheres were prepared by using Chinese bauxite as raw materials through the centrifugal spray drying method. The control technology of microsphere size, degree of sphericity was researched. The ceramic microspheres were sintered by a double sintering process. The microstructure and composition of ceramic microsphere were investigated by X-ray diffraction (XRD), scanning electron microscopy (SEM) and X-ray energy spectroscopy. The results show that the degree of sphericity of the ceramic microsphere was good and the particle size was 10-100 μm. The XRD analysis reveals that the main crystalline phase of the ceramic microsphere was α- Al2O3 and mullite (3Al2O3·2SiO2). The product can be used as reinforced material for composite material, especially for antiskid and hard wearing aluminum alloy coating.

  1. Preparation of High Shrinkage Polypropylene

    Institute of Scientific and Technical Information of China (English)

    吕文军; 王华平; 李建梅; 张玉梅

    2001-01-01

    The common PP chips have been used to prepare high shrinkage PP fibers with shrinkage in boiling water higher than 50%. Meanwhile, the process conditions on fiber structure and properties have been discussed in detail. With the increase of drawing temperature, the shrinkage in boiling water of the fiber increases at first,and then decreases in the temperature range from 70℃ to 100℃. The better drawing temperature is from 75℃ to 85℃ according to the melt index of the PP material. The shrinkage in boiling water of PP fiber increases with the increase of pump delivery. The orientation factor and crystallinity increase with the increase of drawing temperature. With an increase in drawing temperature,unit-cell numbers and monomer unit numbers in every crystal nucleus tend to increase, but unit volume crystal nucleus tend to reduce.

  2. Microfluidic Sample Preparation for Immunoassays

    Energy Technology Data Exchange (ETDEWEB)

    Visuri, S; Benett, W; Bettencourt, K; Chang, J; Fisher, K; Hamilton, J; Krulevitch, P; Park, C; Stockton, C; Tarte, L; Wang, A; Wilson, T

    2001-08-09

    Researchers at Lawrence Livermore National Laboratory are developing means to collect and identify fluid-based biological pathogens in the forms of proteins, viruses, and bacteria. to support detection instruments, they are developing a flexible fluidic sample preparation unit. The overall goal of this Microfluidic Module is to input a fluid sample, containing background particulates and potentially target compounds, and deliver a processed sample for detection. They are developing techniques for sample purification, mixing, and filtration that would be useful to many applications including immunologic and nucleic acid assays. Many of these fluidic functions are accomplished with acoustic radiation pressure or dielectrophoresis. They are integrating these technologies into packaged systems with pumps and valves to control fluid flow through the fluidic circuit.

  3. Preparation of uncladded YBCO wires

    Science.gov (United States)

    Grader, G.; Cadoche, L.; Shter, G.

    1993-04-01

    Wires of YBCO, 1-5 mm in diameter, have been obtained by extrusion of an oxalate derived powder mixed with polyvinyl butyral (PVB) and two phthalate plasticizers. The densification and transport properties of the wires were investigated at various organic loading conditions. For YBCO powder prepared by oxalate coprecipitation and calcined at 930°C, the maximal strength, relative density and Jc were 20MPa, 92% and 400A/cm 2, respectively. Results show that after a 4-hour sintering at 955°C the tensile strength, density, and Jc are all maximized at a binder content of 3-4 wt.%. The loading of up to 10 wt.% dibutyl phthalate (DBP) plasticizer (in the binder) has little effect on the properties. Beyond this loading a drastic drop in Jc is observed. The densification was very poor for sinterings below 950°C, which was reflected by a lower critical current.

  4. Aerosol preparation of intact lipoproteins

    Energy Technology Data Exchange (ETDEWEB)

    Benner, W. Henry (Danville, CA); Krauss, Ronald M (Berkeley, CA); Blanche, Patricia J (Berkeley, CA)

    2012-01-17

    A medical diagnostic method and instrumentation system for analyzing noncovalently bonded agglomerated biological particles is described. The method and system comprises: a method of preparation for the biological particles; an electrospray generator; an alpha particle radiation source; a differential mobility analyzer; a particle counter; and data acquisition and analysis means. The medical device is useful for the assessment of human diseases, such as cardiac disease risk and hyperlipidemia, by rapid quantitative analysis of lipoprotein fraction densities. Initially, purification procedures are described to reduce an initial blood sample to an analytical input to the instrument. The measured sizes from the analytical sample are correlated with densities, resulting in a spectrum of lipoprotein densities. The lipoprotein density distribution can then be used to characterize cardiac and other lipid-related health risks.

  5. Preparing Physicists for Paperless Pedagogy

    Science.gov (United States)

    Fuller, Robert G.

    1996-11-01

    Electronic databases, CD-ROMs and the World Wide Web are making large amounts of physics information in electronic form available to physics faculty members. As we seek to educate the next generation of physicists we need to explore the positive and negative aspects of teaching without using paper. We are preparing to offer a experimental version of calculus-based physics that will use a CD-ROM instead of a printed text. The homework and examinations will be done electronically. The laboratory experiments will be microcomputer-based activities and will include multimedia. This presentation will examine the positive and negative features of print as well as introduce the promises and pitfalls of the electronic teaching of physics. Some time for discussion will be left at the end of the presentation. Members of the audience will surely have comments and suggestions overlooked by the author.

  6. Sonochemical Preparation of Polymer Nanocomposites

    Directory of Open Access Journals (Sweden)

    Hyoung Jin Choi

    2009-06-01

    Full Text Available Thisreview covers sonochemical fabrication of polymer nanocomposites. In addition to its application to the synthesis of various polymeric systems, due to its powerful efficiency, sonochemistry has been widely used not only as the assistant of dispersion for nanomaterials such as carbon nanotubes (CNT and organophillic clay, but also as a special initiator to enhance polymerization for fabrication of polymer nanocomposites with CNT and metallic nanoparticles. Recent developments in the preparation of multi-walled carbon nanotube/polymer nanocomposites with polystyrene and PMMA, magnetic particle/CNT composites and polymer/clay nanocomposites along with their physical characteristics and potential engineering applications will be introduced. Physical characterizations include morphological, thermal, and rheological properties under either an applied electric or magnetic field.

  7. [Bifidogenic factors as drug preparations].

    Science.gov (United States)

    Murashova, A O; Lisitsin, O B; Abramov, N A

    1999-01-01

    The review of new data on the study of bifidobacterial factors of different origin and the probable mechanisms of their favorable action on the microflora of the intestinal tract if presented. The main emphasis is made on the analysis of data on the use of oligosaccharides, including fructo-oligosaccharides, as compounds stimulating the growth and development of bifidobacteria both in pure cultures and in intestinal microflora. Methods for the treatment of natural compounds with a view to enhancing their bifidogenic effect are presented. The possibilities and/or advantages of using bifidogenic factors in vivo and in vitro as medicinal preparations either alone or incorporated in probiotic compositions are evaluated. Suggestion has been made that the choice of the method for using bifidogenic factors may depend on the kind and severity of disturbances in indigenous microflora.

  8. Recent RN graduate perceptions of educational preparation.

    Science.gov (United States)

    Candela, Lori; Bowles, Cheryl

    2008-01-01

    Nursing education programs strive to deliver curricula that prepare and transition graduates not just to survive but to truly thrive in any workplace environment. It is therefore important to reach out to those who have recently entered the nursing workforce to understand their views on educational preparation for practice. The purpose of this descriptive survey was to examine the perceptions of recent nurse graduates with regard to how well their educational programs prepared them for practice in their first jobs as registered nurses. Three hundred fifty-two nurses registered in the state of Nevada who graduated from a basic nursing program within the past five years completed the Survey of Nurses' Perceptions of Educational Preparation. Respondents perceived they were inadequately prepared in pharmacology, clinical practice, leadership/management, and the use of patient electronic medical records. In addition, respondents felt their programs prepared them more for success on the NCLEX-RN than for practice. Recommendations for addressing these issues are offered.

  9. METALLOGRAPHIC SAMPLE PREPARATION STATION-CONSTRUCTIVE CONCEPT

    Directory of Open Access Journals (Sweden)

    AVRAM Florin Timotei

    2016-11-01

    Full Text Available In this paper we propose to present the issues involved in the case of the constructive conception of a station for metallographic sample preparation. This station is destined for laboratory work. The metallographic station is composed of a robot ABB IRB1600, a metallographic microscope, a gripping device, a manipulator, a laboratory grinding and polishing machine. The robot will be used for manipulation of the sample preparation and the manipulator take the sample preparation for processing.

  10. Laboratory evaluation of commercial interferon preparations

    Energy Technology Data Exchange (ETDEWEB)

    Schoub, B.D.; Lyons, S.F.; Crespi, M.; Chiu, M.N. (University of the Witwatersrand, Johannesburg (South Africa). Dept. of Virology); Lomnitzer, R. (University of the Witwatersrand, Johannesburg (South Africa). Dept. of Immunology)

    1983-01-08

    The antiviral, antiproliferative and natural killer-cell (NKC) stimulatory activities of four commercial therapeutic interferon preparations were assayed in a laboratory. The antiviral and antiproliferative activities of each preparation were relatively similar, but an unexpectedly high NKC stimulatory activity was found in one of them. In-house determination of antiviral activity and evaluation of the antiproliferative and NKC stimulation potential of interferon preparations are essential before rational clinical trials of this agent are carried out.

  11. Dynamized Preparations in Cell Culture

    Directory of Open Access Journals (Sweden)

    Ellanzhiyil Surendran Sunila

    2009-01-01

    Full Text Available Although reports on the efficacy of homeopathic medicines in animal models are limited, there are even fewer reports on the in vitro action of these dynamized preparations. We have evaluated the cytotoxic activity of 30C and 200C potencies of ten dynamized medicines against Dalton's Lymphoma Ascites, Ehrlich's Ascites Carcinoma, lung fibroblast (L929 and Chinese Hamster Ovary (CHO cell lines and compared activity with their mother tinctures during short-term and long-term cell culture. The effect of dynamized medicines to induce apoptosis was also evaluated and we studied how dynamized medicines affected genes expressed during apoptosis. Mother tinctures as well as some dynamized medicines showed significant cytotoxicity to cells during short and long-term incubation. Potentiated alcohol control did not produce any cytotoxicity at concentrations studied. The dynamized medicines were found to inhibit CHO cell colony formation and thymidine uptake in L929 cells and those of Thuja, Hydrastis and Carcinosinum were found to induce apoptosis in DLA cells. Moreover, dynamized Carcinosinum was found to induce the expression of p53 while dynamized Thuja produced characteristic laddering pattern in agarose gel electrophoresis of DNA. These results indicate that dynamized medicines possess cytotoxic as well as apoptosis-inducing properties.

  12. LHC Report: Restart preparations continue

    CERN Multimedia

    Katy Foraz for the LHC team and Julia Trummer for the RP Group

    2012-01-01

    Maintenance and consolidation work has been progressing well in both the machine and the experiments in preparation for the March restart.   A sample material is attached to the LHC (the white bag taped to the green line), to measure the radiation doses. Additional work was required around Point 5 due to the discovery and repair of a problem with the RF fingers at the connection of two beam vacuum chambers in CMS. The repair has been completed successfully and the sector is now under vacuum. In order to avoid rushing the delicate final operations required for closing the detector, the restart of the machine has been postponed by one week, from 7 March to 14 March. In the machine, the first cool-down to 1.9 K has started in several sectors ,and the cool-down of the whole machine is still planned to be finished by 21 February. The time window between 22 February and 14 March will be dedicated to powering and cryogenic tests. Since 12 December, the Radiation Protection (RP) group has been deep...

  13. CMS prepares for new challenges

    CERN Multimedia

    Antonella Del Rosso

    2014-01-01

    One of the world’s largest physics experiments has just had a change in leadership. This is a chance for the collaboration to take stock of the tremendous work done for LS1 and to prepare for the challenges that lie ahead.   From left to right: Kerstin Borras, Tiziano Camporesi and Paris Sphicas. “The keyword is teamwork. That’s the only way you can effectively manage a large number of extremely talented and motivated people,” says Tiziano Camporesi who took the reins of the CMS collaboration at the beginning of the year. The recipe might seem easier on paper than in practice. However, given his 28 years at CERN, two of which he spent as the head of the DELPHI collaboration, Camporesi has extensive experience in managing large scientific collaborations and success in this respect is well within his reach: “I have learned many lessons from the past and I believe that building consensus is instrumental to successful leadership.” The C...

  14. Preparing Citizens for the Future

    Science.gov (United States)

    Kubinec, W.

    1995-05-01

    Introductory astronomy courses are heavily utilized by non-science majors to check off a general degree requirement in science. For a large portion of this population, this course will be their only academic encounter with science. Many of these students have not had successful preparatory experiences. Some individuals exhibit a math/science learned helplessness. These facts coupled with the need for science literacy are proper concerns in designing the educational experience called introductory astronomy. My course has been converted largely to a collaborative environment. A unique feature is an emphasis on science policy and the utilization of structured controversy. I use lecture and some video excerpts to introduce science policy and strategic planning. A specific controversial policy related to astronomy is posed. The students prepare pro and con arguments, debate the issue formally in class and engage in small-group discussions to discover common values and solutions. Personal beliefs and the views of various majors provide fuel for lively discourse. Structured controversy develops social responsibility, intellectual competence, conflict resolution skills and personal confidence. These attributes are essential for the techno-political future.

  15. [Bioequivalence studies of pharmaceutical preparations].

    Science.gov (United States)

    Vetchý, D; Frýbortová, K; Rabisková, M; Danecková, H

    2007-01-01

    Bioequivalence studies are very important for the development of a pharmaceutical preparation in the pharmaceutical industry. Their rationale is the monitoring of pharmacokinetic and pharmacodynamic parameters after the administration of tested drugs. The target of such study is to evaluate the therapeutic compatibility of tested drugs (pharmaceutical equivalents or pharmaceutical alternatives). The importance of bioequivalence studies is increasing also due to the large growth of the production and consumption of generic products. Generic products represent approximately 50 % of the whole consumption in many European countries and USA. The search output of bioequivalence study is together with the pharmaceutical quality data of medical product one of the main part of the registration file submitted to a national regulatory authorities. The registration of generic products does not demand complicated and expensive clinical study contrary to original product. The comparison of the original and the generic product via bioequivalence study is suggested as sufficient. The aim of this article is to provide to a medical public a summary about the types of bioequivalence studies, their range, rules of their practise and let them gain their own attitude to this question.

  16. Personality Development during Teacher Preparation

    Science.gov (United States)

    Corcoran, Roisin P.; O’Flaherty, Joanne

    2016-01-01

    Objective: The purpose of this 3-year longitudinal study was to examine pre-service teachers’ personality trajectories as measured by the IPIP Big-Five factor markers during teacher preparation. The relationship between students’ personality traits, social desirability, and prior academic attainment was also examined. Method: This 3-year longitudinal study invited participants from the first year of a 4-year undergraduate (UG) pre-service teacher education program, the class of 2017. The sample consisted of 305 students. Results: The results suggest that extraversion, agreeableness, conscientiousness, emotional stability, and openness to experience were best represented by a non-significant longitudinal change in means. Results also suggest that social desirability predicts agreeableness and emotional stability with small to moderate effect sizes. Conclusion: The study concludes that no value is added to pre-service teachers’ personality traits during 3 years of tertiary education. Furthermore, the data presented does not support the view that academic attainment is a good predictor of personality traits. Implications for educational research, theory, and practice are considered. PMID:27877143

  17. Electrocatalysts Prepared by Galvanic Replacement

    Directory of Open Access Journals (Sweden)

    Athanasios Papaderakis

    2017-03-01

    Full Text Available Galvanic replacement is the spontaneous replacement of surface layers of a metal, M, by a more noble metal, Mnoble, when the former is treated with a solution containing the latter in ionic form, according to the general replacement reaction: nM + mMnoblen+ → nMm+ + mMnoble. The reaction is driven by the difference in the equilibrium potential of the two metal/metal ion redox couples and, to avoid parasitic cathodic processes such as oxygen reduction and (in some cases hydrogen evolution too, both oxygen levels and the pH must be optimized. The resulting bimetallic material can in principle have a Mnoble-rich shell and M-rich core (denoted as Mnoble(M leading to a possible decrease in noble metal loading and the modification of its properties by the underlying metal M. This paper reviews a number of bimetallic or ternary electrocatalytic materials prepared by galvanic replacement for fuel cell, electrolysis and electrosynthesis reactions. These include oxygen reduction, methanol, formic acid and ethanol oxidation, hydrogen evolution and oxidation, oxygen evolution, borohydride oxidation, and halide reduction. Methods for depositing the precursor metal M on the support material (electrodeposition, electroless deposition, photodeposition as well as the various options for the support are also reviewed.

  18. Fuels Preparation Department monthly report, January 1958

    Energy Technology Data Exchange (ETDEWEB)

    1958-02-28

    This report describes the operation of the fuels preparation department for the month of January, 1958. Manufacturing, employee relations, process development, plant improvements, and financial operations are described.

  19. Fuels Preparation Department monthly report, October 1960

    Energy Technology Data Exchange (ETDEWEB)

    1960-11-07

    This report describes the operation of the fuels preparation department for the month of October, 1960. Manufacturing, process development, employee relations, financial operations, and plant improvements are discussed.

  20. Preparation of some compounded soup powders

    Directory of Open Access Journals (Sweden)

    B. S. Bhatia

    1961-01-01

    Full Text Available Recipes for the preparation of some compounded soup powders from tomatoes, potatoes, carrots, green peas, dried peas, chicken and mutton using components like corn starch, skim milk powder, hydrogenated groundnut oil, common salt, mixed spices (black pepper, caraway and ginger and monosodium glutamate have been developed. Pretreatment and drying conditions for the preparation of pre-cooked dry bases from tomatoes, potatoes, carrots, green peas, dried peas, chicken and mutton have been determined. Except for tomatoes where vacuum drier is necessary, other bases can be easily prepared in a simple cross flow hot air cabinet drier and used subsequently in the preparation of soup powders.

  1. STRUCTURAL ANALYSIS OF CONDITIONAL PREPARATION IN JUDO

    Directory of Open Access Journals (Sweden)

    Slavko Obadov

    2006-06-01

    Full Text Available Conditional preparation is a constituent part of overall sports preparation. Conditional training might be defined as a process of improvement of a sportsman’s functional and motor abilities, morphological characteristics, health, as well as the required motor knowledge. Conditional preparation can be might be classified as: general, basic and situational conditional preparation. Programs of the conditional training might be classified as: developing, resuming, recovering, preventive and recovering ones. High level of the general physical preparation enables maximum demonstration of the physical abilities of a sportsman during the stage of improvement of the specific motor abilities. Good general preparation of a sportsman enables him to push beyond his functional limits in order to cope with heavy loads easier, which subsequently enables him to achieve top performance level. Basic conditional preparation assumes the development of the most important judo abilities. Specific conditional preparation is related directly to the execution of different structural elements under the conditional requirements. Situational conditional preparation enables integration of the tactical and conditional training.

  2. Pathfinder - flight preparation on lakebed

    Science.gov (United States)

    1995-01-01

    AeroVironment, Inc., crew members prepare the Pathfinder solar-powered aircraft for its first flight on Rogers Dry Lake at NASA's Dryden Flight Research Center, Edwards, California, after its configuration was shanged from 8 electric motors to 6. Bob Curtin of AeroVironment is in the foreground of the photo. Pathfinder was a lightweight, solar-powered, remotely piloted flying wing aircraft used to demonstrate the use of solar power for long-duration, high-altitude flight. Its name denotes its mission as the 'Pathfinder' or first in a series of solar-powered aircraft that will be able to remain airborne for weeks or months on scientific sampling and imaging missions. Solar arrays covered most of the upper wing surface of the Pathfinder aircraft. These arrays provided up to 8,000 watts of power at high noon on a clear summer day. That power fed the aircraft's six electric motors as well as its avionics, communications, and other electrical systems. Pathfinder also had a backup battery system that could provide power for two to five hours, allowing for limited-duration flight after dark. Pathfinder flew at airspeeds of only 15 to 20 mph. Pitch control was maintained by using tiny elevators on the trailing edge of the wing while turns and yaw control were accomplished by slowing down or speeding up the motors on the outboard sections of the wing. On September 11, 1995, Pathfinder set a new altitude record for solar-powered aircraft of 50,567 feet above Edwards Air Force Base, California, on a 12-hour flight. On July 7, 1997, it set another, unofficial record of 71,500 feet at the Pacific Missile Range Facility, Kauai, Hawaii. In 1998, Pathfinder was modified into the longer-winged Pathfinder Plus configuration. (See the Pathfinder Plus photos and project description.)

  3. Preparing and correcting extracted BRITE observations

    CERN Document Server

    Buysschaert, B; Neiner, C

    2016-01-01

    Extracted BRITE lightcurves must be carefully prepared and corrected for instrumental effects before a scientific analysis can be performed. Therefore, we have created a suite of Python routines to prepare and correct the lightcurves, which is publicly available. In this paper we describe the method and successive steps performed by these routines.

  4. Effective Preparation Program Features: A Literature Review

    Science.gov (United States)

    Crow, Gary M.; Whiteman, Rodney S.

    2016-01-01

    This article is a summary of a report prepared for the University Council for Educational Administration Program Improvement Project for the Wallace Foundation. This explores the research base for educational leadership preparation programs, specifically examining literature on program features. The review covers context, candidates, faculty,…

  5. Praxis and Poiesis in Piano Repertoire Preparation

    Science.gov (United States)

    Dos Santos, Regina Antunes Teixeira; Hentschke, Liane

    2011-01-01

    The piano repertoire preparation of three undergraduate students at three different academic levels--the first, fifth and eighth semesters--was followed during an academic semester. A phenomenological approach was used to collect data in three stages: an introductory interview, observations of the repertoire under preparation and a final…

  6. The Preparation of Human Service Professionals.

    Science.gov (United States)

    Gartner, Alan

    New forms of preparing workers in the human services have the potential of changing and improving those services. A central feature of the new forms of preparation is that they must both be preparatory for the services and be characteristic of them (for example, if the services are participatory in nature, the training should also be so). There is…

  7. Substrate preparation by contactless mechanochemical polish

    Science.gov (United States)

    Rotter, S.; Lachish, U.; El-Hanany, U.

    1985-10-01

    A simple, yet effective, polishing technique for substrate preparation is presented. It is contactless chemical polish which does not introduce any defects into the substrate during the process. The method can be readily adopted in all cases where chemical polishing is practical for substrate preparation. Results similar to those obtained by the more sophisticated hydroplaning method can be achieved.

  8. Preparation of Spirocyclic β-Proline Esters

    DEFF Research Database (Denmark)

    Fjelbye, Kasper; Marigo, Mauro; Clausen, Rasmus Prætorius

    2017-01-01

    A series of novel N-Bn-protected spirocyclic β-proline esters were prepared using [3+2] cycloaddition and subsequently converted into their corresponding aldehydes. In addition, two novel N-Cbz-protected spirocyclic β-proline esters were prepared using intramolecular cyclization starting from...

  9. Leading Leadership Preparation: 21st Century Designs

    Science.gov (United States)

    Farmer, Tod Allen

    2010-01-01

    As political accountability and economic reality increasingly influence higher education, many leadership preparation programs are seeking cost effective instructional delivery systems that yield highly effective results. Simultaneously, large numbers of graduate students are seeking quality leadership preparation programs that provide both…

  10. Praxis and Poiesis in Piano Repertoire Preparation

    Science.gov (United States)

    Dos Santos, Regina Antunes Teixeira; Hentschke, Liane

    2011-01-01

    The piano repertoire preparation of three undergraduate students at three different academic levels--the first, fifth and eighth semesters--was followed during an academic semester. A phenomenological approach was used to collect data in three stages: an introductory interview, observations of the repertoire under preparation and a final…

  11. Perfect Solutions for Wearing Preparation in India

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    @@ Presentation of KARL MAYER's reorganised warp preparation business unit during a series of symposia held in India on the 19, 21 and 23 January. KARL MAYER's Warp Preparation Section continues to focus on providing an excellent customer service, and has recently been reorganised to make it even more efficient.

  12. Perfect Solutions for Weaving Preparation in india

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Presentation of KARL MAYER’s reorganised warp preparation business unit during a series of symposia held in India on the 19,21 and 23 January. KARL MAYER’s Warp Preparation Section continues to focus on providing an excellent customer service,and has recently been reorganised to make it even more efficient.Its operations were presented during the

  13. Preparing Instructional Objectives: Agony or Ecstasy?

    Science.gov (United States)

    Roberts, Wesley K.

    This paper 1) discusses the problems encountered in preparing objectives for instructional programs; 2) describes an informal research project in which seven instructional designers working on the same project attempted to determine agreement on an objective; and 3) suggests how to prepare objectives so that difficulties can be minimized. One…

  14. Final Report BW Sample Collection& Preparation Device

    Energy Technology Data Exchange (ETDEWEB)

    Koopman, R P; Belgrader, P; Meyer, G; Benett, W J; Richards, J B; Hadley, D R; Stratton, P L; Milanovich, F P

    2002-01-31

    The objective of this project was to develop the technique needed to prepare a field collected sample for laboratory analysis and build a portable integrated biological detection instrument with new miniaturized and automated sample purification capabilities. The device will prepare bacterial spores, bacterial vegetative cells, and viral particles for PCR amplification.

  15. Modular microfluidic system for biological sample preparation

    Energy Technology Data Exchange (ETDEWEB)

    Rose, Klint A.; Mariella, Jr., Raymond P.; Bailey, Christopher G.; Ness, Kevin Dean

    2015-09-29

    A reconfigurable modular microfluidic system for preparation of a biological sample including a series of reconfigurable modules for automated sample preparation adapted to selectively include a) a microfluidic acoustic focusing filter module, b) a dielectrophoresis bacteria filter module, c) a dielectrophoresis virus filter module, d) an isotachophoresis nucleic acid filter module, e) a lyses module, and f) an isotachophoresis-based nucleic acid filter.

  16. 30 CFR 57.6303 - Initiation preparation.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Initiation preparation. 57.6303 Section 57.6303 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... Transportation-Surface and Underground § 57.6303 Initiation preparation. (a) Primers shall be made up only at the...

  17. 30 CFR 56.6303 - Initiation preparation.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Initiation preparation. 56.6303 Section 56.6303 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE... Initiation preparation. (a) Primers shall be made up only at the time of use and as close to the blast site...

  18. Grasping Preparation Enhances Orientation Change Detection

    NARCIS (Netherlands)

    Gutteling, T.P.; Kenemans, J.L.; Neggers, S.F.W.

    2011-01-01

    Preparing a goal directed movement often requires detailed analysis of our environment. When picking up an object, its orientation, size and relative distance are relevant parameters when preparing a successful grasp. It would therefore be beneficial if the motor system is able to influence early pe

  19. Intestinal preparation prior to capsule endoscopy administration

    Institute of Scientific and Technical Information of China (English)

    Vicente Pons Beltrán; Cristina Carretero; Bego(n)a Gonzalez-Suárez; I(n)aqui Fernández-Urien; Miguel Mu(n)oz Navas

    2008-01-01

    In order to have an adequate view of the whole small intestine during capsule endoscopy,the preparation recommended consists of a clear liquid diet and an overnight fast.However,visualization of the small bowel during video capsule endoscopy can be impaired by intestinal contents.To improve mucosal visualization,some authors have evaluated different regimens of preparation.There is no consensus about the necessity of intestinal preparation for capsule endoscopy and it should be interesting to develop adequate guidelines to improve its efficacy and tolerability.Moreover,the effect of preparation type (purgative) on intestinal transit time is not clear.Since a bowel preparation cannot definitively improve its visibility (and theoretically the yield of the test),it is not routinely recommended.

  20. Pre-operative antiseptic skin preparation.

    Science.gov (United States)

    Murkin, Claire Elizabeth

    Theatre nurses use antiseptic skin preparation products every day, but little thought seems to be given as to why a surgeon has a particular preference for one antiseptic skin preparation over another - whether it is for its efficacy, safety or application properties. Woodhead et al (2004) states that nurses still work in a ritualistic environment. Rituals are 'any action performed according to custom, without understanding the reasons why it is being practised'. Nursing practice should be evidence-based; nurses should understand the rationale behind the choice of a particular antiseptic, and be knowledgable about the clinical effectiveness of antiseptic's use pre-operatively, to achieve optimum results. This article focuses on the main types of antiseptic skin preparation while highlighting each product's activity and the relevant considerations for choosing the appropriate product for each patient. Theatre staff need to emphasize the importance of skin preparation and the correct application techniques, while educating the scrub team and surgeons with respect to skin preparation.

  1. Optimal Bowel Preparation for Video Capsule Endoscopy

    Directory of Open Access Journals (Sweden)

    Hyun Joo Song

    2016-01-01

    Full Text Available During video capsule endoscopy (VCE, several factors, such as air bubbles, food material in the small bowel, and delayed gastric and small bowel transit time, influence diagnostic yield, small bowel visualization quality, and cecal completion rate. Therefore, bowel preparation before VCE is as essential as bowel preparation before colonoscopy. To date, there have been many comparative studies, consensus, and guidelines regarding different kinds of bowel cleansing agents in bowel preparation for small bowel VCE. Presently, polyethylene glycol- (PEG- based regimens are given primary recommendation. Sodium picosulphate-based regimens are secondarily recommended, as their cleansing efficacy is less than that of PEG-based regimens. Sodium phosphate as well as complementary simethicone and prokinetics use are considered. In this paper, we reviewed previous studies regarding bowel preparation for small bowel VCE and suggested optimal bowel preparation of VCE.

  2. Preparation for Family Life. The CCC's Project No. 1: "Preparation for Life."

    Science.gov (United States)

    Schleicher, Klaus

    Part of the Council of Europe's Project Number 1, "Preparation for Life," this report analyzes developments in Austria, Finland, the Federal Republic of Germany, and England in the area of preparation for family life. Specifically, the report (1) explains the growing concern in the above countries for the preparation for family life; (2)…

  3. Preparation and Reactions of Octasilsesquioxanes

    Institute of Scientific and Technical Information of China (English)

    Liu Ling-Kang

    2004-01-01

    Because of the length scales involved, nanocomposite materials incorporate extensive interracial interactions that can result in non-linear changes in the composite property. Chemists often start from polymerizable inorganic and organic constituents in the molecule to build organic/inorganic hybrids that combine advantageous properties of disparate components.Silsesquioxanes (RSiO1.5)n, derived from e.g. RSiCl3 or RSi(OEt)3 by hydrolysis/condensation in a sol-gel process, are a class of silicate framework where each Si-atom is linked covalently to an organic radical R that chemically modifies the silicates. In addition to incompletely condensed silsesquioxanes is the completely condensed octasilsesquioxane. These octameric silsesquioxanes are in transition between small molecules and macroscopic materials with skeletal frameworks found in crystalline forms of silica and zeolites. SisO12(CH=CH2)8 1 has a cubic silica like core and 8 olefin functionalities as known for a long time yet with very few reactivity reports. The acidic hydrolytic polycondensation of (vinyl)Si(OEt)3 in the literature, leading to only less than 20% of 1,also suggests a large room for improvement. We have found that the H NMR spectra of mixtures containing 1 and either the Schrock's catalyst or the Grubbs' catalyst never exhibit vinylic 1H peaks attributable to the formation of products from self-metathesis. With a Pt/C catalyst, the H-Si bond of HSiMe2Cl adds to the vinylic double bond of 1, forming 2 that reacts with sufficient CH2=CHCH2OH to give 3. Upon treatment of the Grubbs' catalyst, a ring-closing metathesis occurs on the surface of the cubic Si8O12 framework. The results exhibit a strong proximity effect with which 3 transforms itself to 4. Alternatively 5 has been prepared.The Gmbbs' catalyst allows 5 to isomerize from Z- to E-configuration to produce 4 independentiy, thus demonstrating the ring-closing metathesis reactions of densely populated terminal olefins on Si8O12 surface.

  4. Reach preparation enhances visual performance and appearance.

    Science.gov (United States)

    Rolfs, Martin; Lawrence, Bonnie M; Carrasco, Marisa

    2013-10-19

    We investigated the impact of the preparation of reach movements on visual perception by simultaneously quantifying both an objective measure of visual sensitivity and the subjective experience of apparent contrast. Using a two-by-two alternative forced choice task, observers compared the orientation (clockwise or counterclockwise) and the contrast (higher or lower) of a Standard Gabor and a Test Gabor, the latter of which was presented during reach preparation, at the reach target location or the opposite location. Discrimination performance was better overall at the reach target than at the opposite location. Perceived contrast increased continuously at the target relative to the opposite location during reach preparation, that is, after the onset of the cue indicating the reach target. The finding that performance and appearance do not evolve in parallel during reach preparation points to a distinction with saccade preparation, for which we have shown previously there is a parallel temporal evolution of performance and appearance. Yet akin to saccade preparation, this study reveals that overall reach preparation enhances both visual performance and appearance.

  5. Preparation and Characterization of Magnetic Chitosan Microcapsules

    Directory of Open Access Journals (Sweden)

    Xiaopeng Xiong

    2013-01-01

    Full Text Available By dispersing aqueous precipitant in liquid paraffin to prepare a W/O emulsion then adding chitosan (CS solution, CS microcapsules have been successfully prepared. It is a facile way to prepare polymer microcapsules by using aqueous precipitant or nonsolvent as template, which avoids the removal of template and would free from the necessity to cross-link the microcapsule as usual methods to directly form dense shell. The hollow feature of the obtained materials is revealed. The diameter of the microcapsules ranges from several μm to over 100 μm. Magnetic CS microcapsules have been prepared in this way when Fe3+ and Fe2+ were mixed with CS to prepare a mixture starting solution. The appearance and microstructure of the composite microcapsules were studied. The results indicate that the formed Fe3O4 nanoparticles are embedded in the CS matrix evenly due to strong interaction between the Fe3O4 nanoparticles and the CS molecules. The Fe3O4 content and the magnetic properties of the composite microcapsule were measured. The composite microcapsules were calcined in air at 700°C to prepare pure inorganic hollow microspheres. It is general to prepare hollow polymeric or composite particles by using this method.

  6. Molecularly imprinted polymers for bioanalytical sample preparation.

    Science.gov (United States)

    Gama, Mariana Roberto; Bottoli, Carla Beatriz Grespan

    2017-02-01

    Molecularly imprinted polymers (MIP) are stable polymers with molecular recognition abilities, provided by the presence of a template during their synthesis, and are excellent materials with high selectivity for sample preparation in bioanalytical methods. This short review discusses aspects of MIP preparation and its applications as a sorbent material in pharmaceutical and biomedical analysis. MIP in different extraction configurations, including classical solid-phase extraction, solid-phase microextraction, magnetic molecularly imprinted solid-phase extraction, microextraction by packed sorbent and solid-phase extraction in pipette tips, are used to illustrate the good performance of this type of sorbent for sample preparation procedures of complex matrices, especially prior to bioanalytical approaches.

  7. Modern Endodontic Principles Part 3: Preparation.

    Science.gov (United States)

    Darcey, James; Taylor, Carly; Roudsari, Reza Vahid; Jawad, Sarra; Hunter, Mark

    2015-11-01

    The purpose of instrumentation is to facilitate irrigation and allow controlled obturation. This article will revisit methods of instrumentation of the root canal system with consideration given to length determination, apical preparation and the concept of patency filing. It will discuss hand instrumentation and rotary preparation looking at emerging technology such as reciprocating systems and the self-adjusting file. CPD/CLINICAL RELEVANCE: Mechanical preparation of the root canal system is of fundamental importance in achieving success, creating a more easily managed environment from a biological perspective.

  8. TRIZ theory in NEA photocathode preparation system

    Science.gov (United States)

    Qiao, Jianliang; Huang, Dayong; Li, Xiangjiang; Gao, Youtang

    2016-09-01

    The solutions to the engineering problems were provided according to the innovation principle based on the theory of TRIZ. The ultra high vacuum test and evaluation system for the preparation of negative electron affinity (NEA) photocathode has the characteristics of complex structure and powerful functions. Segmentation principle, advance function principle, curved surface principle, dynamic characteristics principle and nested principle adopted by the design of ultra high vacuum test and evaluation system for cathode preparation were analyzed. The applications of the physical contradiction and the substance-field analysis method of the theory of TRIZ in the cathode preparation ultra high vacuum test and evaluation system were discussed.

  9. Standard operating procedure to prepare agar phantoms

    Science.gov (United States)

    Souza, R. M.; Santos, T. Q.; Oliveira, D. P.; Souza, R. M.; Alvarenga, A. V.; Costa-Felix, R. P. B.

    2016-07-01

    Agar phantoms are widely used as soft tissue mimics and some preparation techniques are described in the literature. There are also standards that describe the recipe of a soft tissue mimicking material (TMM). However some details of manufacture process are not clearly defined. The standardization of the phantom's preparation can produce a metrological impact on the results of the acoustic properties measured. In this direction, this paper presents a standard operating procedure (SOP) to prepare the agar TMM described on the IEC 60601-237.

  10. Probabilistic remote state preparation by W states

    Institute of Scientific and Technical Information of China (English)

    Liu Jin-Ming; Wang Yu-Zhu

    2004-01-01

    In this paper we consider a scheme for probabilistic remote state preparation of a general qubit by using W states. The scheme consists of the sender, Alice, and two remote receivers Bob and Carol. Alice performs a projective measurement on her qubit in the basis spanned by the state she wants to prepare and its orthocomplement. This allows either Bob or Carol to reconstruct the state with finite success probability. It is shown that for some special ensembles of qubits, the remote state preparation scheme requires only two classical bits, unlike the case in the scheme of quantum teleportation where three classical bits are needed.

  11. Techniques for the Preparation of Porous Metals

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Porous metals have been developed greatly and swiftly in recent years. In this paper, main types of these materials are described briefly, and their preparation methods are related primarily, with the purpose offering some clues for optimizing the producing technology.

  12. Preparation Of Charcoal Using Agricultural Wastes | Bogale ...

    African Journals Online (AJOL)

    Preparation Of Charcoal Using Agricultural Wastes. ... alternative to wood charcoal using agricultural wastes (dry leaves, coffee husk, sugarcane trash, ... produced from agricultural wastes are economical, environmentally friendly, healthy (no ...

  13. Deterministic remote preparation via the Brown state

    Science.gov (United States)

    Ma, Song-Ya; Gao, Cong; Zhang, Pei; Qu, Zhi-Guo

    2017-04-01

    We propose two deterministic remote state preparation (DRSP) schemes by using the Brown state as the entangled channel. Firstly, the remote preparation of an arbitrary two-qubit state is considered. It is worth mentioning that the construction of measurement bases plays a key role in our scheme. Then, the remote preparation of an arbitrary three-qubit state is investigated. The proposed schemes can be extended to controlled remote state preparation (CRSP) with unit success probabilities. At variance with the existing CRSP schemes via the Brown state, the derived schemes have no restriction on the coefficients, while the success probabilities can reach 100%. It means the success probabilities are greatly improved. Moreover, we pay attention to the DRSP in noisy environments under two important decoherence models, the amplitude-damping noise and phase-damping noise.

  14. Semen preparation techniques for intrauterine insemination

    NARCIS (Netherlands)

    Boomsma, Carolien M.; Heineman, M. J.; Cohlen, B. J.; Farquhar, C.

    2007-01-01

    Background Semen preparation techniques for assisted reproduction, including intrauterine insemination (IUI), were developed to separate the motile morphological normal spermatozoa. Leucocytes, bacteria and dead spermatozoa produce oxygen radicals that negatively influence the ability to fertilize

  15. PREPARATION OF LEUCITE-BASED COMPOSITES

    Directory of Open Access Journals (Sweden)

    Alexandra Kloužková

    2012-12-01

    Full Text Available The aim of this study was to prepare leucite dental composites from two separately synthesized components - tetragonal leucite and glassy matrix. The newly developed procedure is based on the preparation of crystalline tetragonal leucite powder by relatively low temperature synthesis under hydrothermal conditions. Matrix powder was prepared by a classical melting process and subsequent milling of the quenched glass. The dental composites were prepared by mixing of 10 wt. %, 20 wt. % and 30 wt. % of synthesized tetragonal leucite with glass powder followed by pressing and firing. The sintering process was observed by optical microscope and the optimal firing temperature for each composite was determined. Optical and electron microscopy was used to characterise the microstructure of the composites, especially the distribution of the leucite particles in the matrix. Dilatometric measurements proved that the coefficient of thermal expansion of the composites increased up to 44 % in comparison with the basic matrix.

  16. Progress involving new techniques for liposome preparation

    Directory of Open Access Journals (Sweden)

    Zhenjun Huang

    2014-08-01

    Full Text Available The article presents a review of new techniques being used for the preparation of liposomes. A total of 28 publications were examined. In addition to the theories, characteristics and problems associated with traditional methods, the advantages and drawbacks of the latest techniques were reviewed. In the light of developments in many relevant areas, a variety of new techniques are being used for liposome preparation and each of these new technique has particular advantages over conventional preparation methods. However, there are still some problems associated with these new techniques that could hinder their applications and further improvements are needed. Generally speaking, due to the introduction of these latest techniques, liposome preparation is now an improved procedure. These applications promote not only advances in liposome research but also the methods for their production on an industrial scale.

  17. Sample preparation in biological mass spectrometry

    CERN Document Server

    Ivanov, Alexander R

    2011-01-01

    The aim of this book is to provide the researcher with important sample preparation strategies in a wide variety of analyte molecules, specimens, methods, and biological applications requiring mass spectrometric analysis as a detection end-point.

  18. Preparation of genomic DNA from bacteria.

    Science.gov (United States)

    Andreou, Lefkothea-Vasiliki

    2013-01-01

    The purpose of this protocol is the isolation of bulk cellular DNA from bacteria (alternatively see Preparation of genomic DNA from Saccharomyces cerevisiae or Isolation of Genomic DNA from Mammalian Cells protocols). Copyright © 2013 Elsevier Inc. All rights reserved.

  19. Preparing teachers: building evidence for sound policy

    National Research Council Canada - National Science Library

    Committee on the Study of Teacher Preparation Programs in the United States; National Research Council

    2010-01-01

    "Teachers make a difference. The success of any plan for improving educational outcomes depends on the teachers who carry it out and thus on the abilities of those attracted to the field and their preparation...

  20. Infant Formula - Buying, Preparing, Storing, and Feeding

    Science.gov (United States)

    ... 000806.htm Infant Formula – Buying, Preparing, Storing, and Feeding To use the sharing features on this page, ... brush to get at hard-to-reach places. Feeding Formula to Baby Here is a guide to ...

  1. 29 CFR 780.913 - Nonexempt preparation.

    Science.gov (United States)

    2010-07-01

    ..., PROCESSING OF AGRICULTURAL COMMODITIES, AND RELATED SUBJECTS UNDER THE FAIR LABOR STANDARDS ACT Employment in... performed on the farm in preparation for market (such as ripening, cleaning, grading, or sorting)...

  2. Porcelain veneers - preparation design: A retrospective review

    Directory of Open Access Journals (Sweden)

    Obradović-Đuričić Kosovka B.

    2014-01-01

    Full Text Available This paper discusses the preparation of tooth design for porcelain veneers. It follows the literature more than three decades back in the past. From the very beginning, porcelain veneers were placed to no/minimally prepared tooth substance, showing different problems in clinical use. Later, the technique of etching the porcelain and controlling the reduction of tooth structure, presented the great steps forward in porcelain veneers accepting. A special accent concerning the preparative design was placed on variations of incisal edge preparation - the problem, which is still present in current practice. Additionally, the paper emphasizes the extremely demanding protocols in making the porcelain veneers as well as their expanded clinical indications.

  3. Preparation of aluminium lakes by electrocoagulation

    OpenAIRE

    Prapai Pradabkham

    2008-01-01

    Aluminium lakes have been prepared by electrocoagulation employing aluminium as electrodes. The electrocoagulation is conducted in an aqueous alcoholic solution and is completed within one hour. The dye content in the lake ranges approximately between 4-32%.

  4. Preoperative antiseptic skin preparations and reducing SSI.

    Science.gov (United States)

    Al Maqbali, Mohammed Abdullah

    Surgical site infection (SSI) can affect the quality of care and increase the morbidity and mortality rate in after-surgical procedure. The use of an antiseptic skin preparation agent before the procedure can reduce the pathogens in the skin surface around the incision. Indicating the type of skin antiseptic preparation could prevent the infection and contamination of the wound. The most commonly used types of skin preparations are chlorhexidine and povidone iodine. However, the antiseptic solutions of both agents are strengthened with alcohol to prevent postoperative wound infection. The aim of this paper is to identify the best antiseptic agent in terms of skin preparation by evaluating the evidence in the literature. The factors associated with choosing the antiseptic skin agent, such as patients' allergies, skin condition and environmental risk, are also taken into account. This review suggests that cholorhexdine with alcohol may be the most effective in terms of reducing SSI.

  5. Preparing Teachers to Learn From Teaching

    Institute of Scientific and Technical Information of China (English)

    马悦

    2012-01-01

    A teacher preparation program is needed to help prospective teacher learn how to teach from studying teaching. The program is composed of four skills. The program is more realistic and brings more promising set of beginning teacher competencies.

  6. Preparing manuscript: Scientific writing for publication

    Science.gov (United States)

    Bajwa, Sukhminder Jit Singh; Sawhney, Chhavi

    2016-01-01

    Publication has become a burning issue among Indian medical fraternity owing to certain academic and professional necessities. The large number of submissions to the anaesthesia journals has resulted in accumulation of too much below average scientific material. A properly written manuscript is the dream of every editor and reviewer. The art of preparing a manuscript can be acquired only by following certain basic rules and technical aspects, besides knowledge and skills. Before preparing the manuscript, a target journal should be considered. All the instructions to the authors pertaining to that particular journal should be followed meticulously before preparing the manuscript for submission. The basic structure of the manuscript to be followed can be summarised by the acronym IMRaD (introduction, methods, results and discussion). The current review article aims to highlight all those mandatory and desirable features which should be kept in consideration while preparing a scientific manuscript for publication. PMID:27729696

  7. Preparing for the next flu pandemic

    Institute of Scientific and Technical Information of China (English)

    吴行

    2005-01-01

    There has not been a worldwide outbreak of in-fluenza (流感) since 1968.Experts say there should have been another by now. They hope to be prepared to limit the effects when the nextone finally happens.

  8. Time Well Spent: Preparation for Impromptu Speaking.

    Science.gov (United States)

    Dean, Kevin W.

    1987-01-01

    Asserts that impromptu speaking should be viewed as an event which develops students' organizational ability, creative thinking, audience analysis, and delivery skills. Presents various techniques to aid students and coaches in pre-tournament preparation for impromptu speaking. (MM)

  9. Preparing Students for the Electronic Cottage.

    Science.gov (United States)

    Navin, Sally L.; Burdin, Joel

    1986-01-01

    Focuses on Alvin Toffler's "electronic cottage" concept as a way of helping counselors become aware of futuristic thinking patterns, changing work roles and patterns in society, and techniques for preparing students for these changes. (Author/ABB)

  10. 21 CFR 184.1538 - Nisin preparation.

    Science.gov (United States)

    2010-04-01

    ... preparation contains nisin (CAS Reg. No. 1414-45-5), a group of related peptides with antibiotic activity. (b... million. (5) Copper, zinc plus copper not more than 50 parts per million. (6) Total plate count, not...

  11. Semen preparation techniques for intrauterine insemination

    NARCIS (Netherlands)

    Boomsma, C. M.; Heineman, M. J.; Cohlen, B. J.; Farquhar, C.

    2007-01-01

    Background Semen preparation techniques for assisted reproduction, including intrauterine insemination (IUI), were developed to separate the motile morphological normal spermatozoa. Leucocytes, bacteria and dead spermatozoa produce oxygen radicals that negatively influence the ability to fertilize t

  12. Carbon membranes precursor, preparation, and funtionalization

    NARCIS (Netherlands)

    Barsema, Jonathan Nathaniel

    2004-01-01

    In this thesis we study the preparation of Carbon Molecular Sieve (CMS) membranes for the separation of gases. The gases are separated based on their size difference and affinity for the membrane material.

  13. Preparation and characteristics of porous ceramics

    Institute of Scientific and Technical Information of China (English)

    Dongmei SHAO; Peiping ZHANG; Liyan MA; Juanjuan LIU

    2007-01-01

    Pyrophyllite is always used for making porous ceramics. In order to design the preparation technics of porous ceramics with pyrophyllite reasonably we must know the classifications, characteristics, properties and applications of porous ceramics. The classification and characteristics of porous ceramics are reviewed in this article; and several common preparations with their advantages and disadvantages are also introduced. The authors discussed the problems existing in researching and developing process for porous ceramics, and forecasted the development prospect of porous ceramics.

  14. Return on investment (ROI) proposal preparation guide

    Energy Technology Data Exchange (ETDEWEB)

    Renner, J.C., Westinghouse Hanford

    1997-01-21

    The ROI Proposal Preparation Guide is a tool to assist Hanford waste generators in preparing ROI proposal forms for submittal to RL. The guide describes the requirements for submitting an ROI proposal and provides examples of completed ROI forms. The intent is to assist waste generators in identifying projects that meet the criteria, provide information necessary complete the ROI forms with all of the required information, and submit a proposal that is eligible to receive funding.

  15. Catalytic Cracking of Heptane Using Prepared Zeolite

    OpenAIRE

    Mohammed Nsaif; Ahmed Abdulhaq; Ali Farhan; Safa Neamat

    2012-01-01

    This investigation was conducted to study the potential of type Y-zeolite prepared locally from Iraqi Rice Husk (IRH) (which considered as a type of agricultural waste that difficult to discard it in conventional methods in Iraq) on the removal of one heavy metals pollutant which was divalent zinc (Zn+2) ions from industrial wastewater using different design parameters by adsorption process. The design parameters studied to remove (Zn+2) ions using zeolite prepared locally from (IRH) as an ad...

  16. The Importance of Psychological Preparation in Football

    OpenAIRE

    Catalin Octavian MANESCU

    2013-01-01

    The psychological preparation plays a particularly important role, being meant to group the player’s resources and skills that allow him to process the information, select the answers and apply his tactic thinking, according to the game plan and game strategy formulated by the coach. The planning of the mental preparation is enforced by concretely establishing the objectives, actions, achievement means, responsible factors, related duties and by a current and periodical control of the results...

  17. Raman Scattering in Coherently Prepared Atomic System

    Institute of Scientific and Technical Information of China (English)

    LIN Fu-Cheng(林福成); Yongjoo Rhee; Jonghoon Yi; Hyunmin Park

    2001-01-01

    Atoms in the coherent superposition state prepared by a pulse pair are used as a novel optical memory material where a single interrogation pulse will produce a new pulse pair preserving the relative amplitudes and phases of the preparing pulse pair. Such a coherent superposition state can also be specially tailored along the propagation path to generate Raman scattering in a relatively short distance with very high efficiency.

  18. PREPARATION OF POLYALKYLCYANOACRYLATE NANOPARTICLES WITH VARIOUS MORPHOLOGIES

    Institute of Scientific and Technical Information of China (English)

    Qing-lin Xu; He-xian Li; Guo-chang Wang

    2011-01-01

    The effects of various reaction conditions on the preparation of polyalkylcyanoacrylate (PACA) nanoparticles are studied. The PACA nanoparticles with different crosslinking degrees and morphology are prepared. Addition of crosslinkers can not only adjust the particle size, but also change the morphology of PACA nanoparticles. Moreover, the loose network structure of the PACA nanoparticles with “core/shell-like” morphology is investigated by AFM and TEM in detail.

  19. Does explicit expectation really affect preparation?

    Science.gov (United States)

    Umbach, Valentin J; Schwager, Sabine; Frensch, Peter A; Gaschler, Robert

    2012-01-01

    Expectation enables preparation for an upcoming event and supports performance if the anticipated situation occurs, as manifested in behavioral effects (e.g., decreased RT). However, demonstrating coincidence between expectation and preparation is not sufficient for attributing a causal role to the former. The content of explicit expectation may simply reflect the present preparation state. We targeted this issue by experimentally teasing apart demands for preparation and explicit expectations. Expectations often originate from our experience: we expect that events occurring with a high frequency in the past are more likely to occur again. In addition to expectation, other task demands can feed into action preparation. In four experiments, frequency-based expectation was pitted against a selective response deadline. In a three-choice reaction time task, participants responded to stimuli that appeared with varying frequency (60, 30, 10%). Trial-by-trial stimulus expectations were either captured via verbal predictions or induced by visual cues. Predictions as well as response times quickly conformed to the variation in stimulus frequency. After two (of five) experimental blocks we forced participants by selective time pressure to respond faster to a less frequent stimulus. Therefore, participants had to prepare for one stimulus (medium frequency) while often explicitly expecting a different one (high frequency). Response times for the less frequent stimulus decreased immediately, while explicit expectations continued to indicate the (unchanged) presentation frequencies. Explicit expectations were thus not just reflecting preparation. In fact, participants responded faster when the stimulus matched the trial-wise expectations, even when task demands discouraged their use. In conclusion, we argue that explicit expectation feeds into preparatory processes instead of being a mere by-product.

  20. Stability of extemporaneously prepared rosuvastatin oral suspension.

    Science.gov (United States)

    Zaid, Abdel Naser; Shtayah, Rania; Qadumi, Ayman; Ghanem, Mashour; Qedan, Rawan; Daibes, Marah; Awwad, Somud Abu; Jaradat, Nidal; Kittana, Naim

    2017-10-01

    The stability of an extemporaneously prepared rosuvastatin suspension stored over 30 days under various storage conditions was evaluated. Rosuvastatin suspension was extemporaneously prepared using commercial rosuvastatin tablets as the source of active pharmaceutical ingredient. The organoleptic properties, dissolution profile, and stability of the formulation were investigated. For the stability studies, samples of the suspension were stored under 2 storage conditions, room temperature (25 °C and 60% relative humidity) and accelerated stability chambers (40 °C and 75% relative humidity). Viscosity, pH, organoleptic properties, and microbial contamination were evaluated according to the approved specifications. High-performance liquid chromatography was used for the analysis and quantification of rosuvastatin in selected samples. Microbiological investigations were also conducted. The prepared suspension showed acceptable organoleptic properties. It showed complete release of rosuvastatin within 15 minutes. The pH of the suspension was 9.8, which remained unchanged during the stability studies. The microbiological investigations demonstrated that the preparation was free of any microbial contamination. In addition, the suspension showed stability within at least the period of use of a 100-mL rosuvastatin bottle. Extemporaneously prepared rosuvastatin 20-mg/mL suspension was stable for 30 days when stored at room temperature. Copyright © 2017 by the American Society of Health-System Pharmacists, Inc. All rights reserved.

  1. Everyday meal preparation for people with dementia

    DEFF Research Database (Denmark)

    Iversen, Mette Kathrine Friis; Nejsum, Hanne Lindberg; Bendtsen, Trine Vase

    2016-01-01

    When people are diagnosed with dementia everyday activities like meal preparation will gradually become more difficult. A recipe is a support for meal preparation but as dementia develops, it seems that following a recipe can be a challenge. In Denmark health professionals often use meal preparat......When people are diagnosed with dementia everyday activities like meal preparation will gradually become more difficult. A recipe is a support for meal preparation but as dementia develops, it seems that following a recipe can be a challenge. In Denmark health professionals often use meal...... in everyday life. Furthermore getting the appropriate and nutritious food will be a step in the right direction regarding prevention of malnutrition. The aim of this project is to develop a guide to increase the possibility for people with dementia to continue everyday life through participating in meal...... preparation. The guide includes ideas for constructing recipes, methods for planning and guiding the process and examples of utensils that can increase the ability to cook in the persons own home or in an institutionalized setting. This supports the person with dementia both nutritionally, cognitively...

  2. Intelligent assistance in scientific data preparation

    Science.gov (United States)

    Chien, Steve; Kandt, R. Kirk; Roden, Joseph; Doyle, Richard J.; Burleigh, Scott; King, Todd; Joy, Steve

    1993-01-01

    Scientific data preparation is the process of extracting usable scientific data from raw instrument data. This task involves noise detection (and subsequent noise classification and flagging or removal), extracting data from compressed forms, and construction of derivative or aggregate data (e.g. spectral densities or running averages). A software system called PIPE provides intelligent assistance to users developing scientific data preparation plans using a programming language called Master Plumber. PIPE provides this assistance capability by using a process description to create a dependency model of the scientific data preparation plan. This dependency model can then be used to verify syntactic and semantic constraints on processing steps to perform limited plan validation. PIPE also provides capabilities for using this model to assist in debugging faulty data preparation plans. In this case, the process model is used to focus the developer's attention upon those processing steps and data elements that were used in computing the faulty output values. Finally, the dependency model of a plan can be used to perform plan optimization and run time estimation. These capabilities allow scientists to spend less time developing data preparation procedures and more time on scientific analysis tasks.

  3. The Pharmacokinetics and Pharmacodynamics of Iron Preparations

    Directory of Open Access Journals (Sweden)

    Susanna Burckhardt

    2011-01-01

    Full Text Available Standard approaches are not appropriate when assessing pharmacokinetics of iron supplements due to the ubiquity of endogenous iron, its compartmentalized sites of action, and the complexity of the iron metabolism. The primary site of action of iron is the erythrocyte, and, in contrast to conventional drugs, no drug-receptor interaction takes place. Notably, the process of erythropoiesis, i.e., formation of new erythrocytes, takes 3−4 weeks. Accordingly, serum iron concentration and area under the curve (AUC are clinically irrelevant for assessing iron utilization. Iron can be administered intravenously in the form of polynuclear iron(III-hydroxide complexes with carbohydrate ligands or orally as iron(II (ferrous salts or iron(III (ferric complexes. Several approaches have been employed to study the pharmacodynamics of iron after oral administration. Quantification of iron uptake from radiolabeled preparations by the whole body or the erythrocytes is optimal, but alternatively total iron transfer can be calculated based on known elimination rates and the intrinsic reactivity of individual preparations. Degradation kinetics, and thus the safety, of parenteral iron preparations are directly related to the molecular weight and the stability of the complex. High oral iron doses or rapid release of iron from intravenous iron preparations can saturate the iron transport system, resulting in oxidative stress with adverse clinical and subclinical consequences. Appropriate pharmacokinetics and pharmacodynamics analyses will greatly assist our understanding of the likely contribution of novel preparations to the management of anemia.

  4. The pharmacokinetics and pharmacodynamics of iron preparations.

    Science.gov (United States)

    Geisser, Peter; Burckhardt, Susanna

    2011-01-04

    Standard approaches are not appropriate when assessing pharmacokinetics of iron supplements due to the ubiquity of endogenous iron, its compartmentalized sites of action, and the complexity of the iron metabolism. The primary site of action of iron is the erythrocyte, and, in contrast to conventional drugs, no drug-receptor interaction takes place. Notably, the process of erythropoiesis, i.e., formation of new erythrocytes, takes 3-4 weeks. Accordingly, serum iron concentration and area under the curve (AUC) are clinically irrelevant for assessing iron utilization. Iron can be administered intravenously in the form of polynuclear iron(III)-hydroxide complexes with carbohydrate ligands or orally as iron(II) (ferrous) salts or iron(III) (ferric) complexes. Several approaches have been employed to study the pharmacodynamics of iron after oral administration. Quantification of iron uptake from radiolabeled preparations by the whole body or the erythrocytes is optimal, but alternatively total iron transfer can be calculated based on known elimination rates and the intrinsic reactivity of individual preparations. Degradation kinetics, and thus the safety, of parenteral iron preparations are directly related to the molecular weight and the stability of the complex. High oral iron doses or rapid release of iron from intravenous iron preparations can saturate the iron transport system, resulting in oxidative stress with adverse clinical and subclinical consequences. Appropriate pharmacokinetics and pharmacodynamics analyses will greatly assist our understanding of the likely contribution of novel preparations to the management of anemia.

  5. Remote state preparation of spatial qubits

    Energy Technology Data Exchange (ETDEWEB)

    Solis-Prosser, M. A.; Neves, L. [Center for Optics and Photonics, Universidad de Concepcion, Casilla 4016, Concepcion (Chile) and Departamento de Fisica, Universidad de Concepcion, Casilla 160-C, Concepcion (Chile)

    2011-07-15

    We study the quantum communication protocol of remote state preparation (RSP) for pure states of qubits encoded in single photons transmitted through a double slit, the so-called spatial qubits. Two measurement strategies that one can adopt to remotely prepare the states are discussed. The first strategy is the well-known spatial postselection, where a single-pixel detector measures the transverse position of the photon between the focal and the image plane of a lens. The second strategy, proposed by ourselves, is a generalized measurement divided into two steps: the implementation of a two-outcome positive operator-valued measurement (POVM) followed by the spatial postselection at the focal plane of the lens by a two-pixel detector in each output of the POVM. In both cases we analyze the effects of the finite spatial resolution of the detectors over three figures of merit of the protocol, namely, the probability of preparation, the fidelity, and purity of the remotely prepared states. It is shown that our strategy improves these figures compared with spatial postselection, at the expense of increasing the classical communication cost as well as the required experimental resources. In addition, we present a modified version of our strategy for RSP of spatial qudits which is able to prepare arbitrary pure states, unlike spatial postselection alone. We expect that our study may also be extended for RSP of the angular spectrum of a single-photon field as an alternative for quantum teleportation which requires very inefficient nonlinear interactions.

  6. Preparing entangled states by Lyapunov control

    Science.gov (United States)

    Shi, Z. C.; Wang, L. C.; Yi, X. X.

    2016-09-01

    By Lyapunov control, we present a protocol to prepare entangled states such as Bell states in the context of cavity QED system. The advantage of our method is of threefold. Firstly, we can only control the phase of classical fields to complete the preparation process. Secondly, the evolution time is sharply shortened when compared to adiabatic control. Thirdly, the final state is steady after removing control fields. The influence of decoherence caused by the atomic spontaneous emission and the cavity decay is discussed. The numerical results show that the control scheme is immune to decoherence, especially for the atomic spontaneous emission from |2rangle to |1rangle . This can be understood as the state staying in an invariant subspace. Finally, we generalize this method in preparation of W state.

  7. Arsenic Release from Foodstuffs upon Food Preparation.

    Science.gov (United States)

    Cheyns, Karlien; Waegeneers, Nadia; Van de Wiele, Tom; Ruttens, Ann

    2017-03-22

    In this study the concentration of total arsenic (As) and arsenic species (inorganic As, arsenobetaine, dimethylarsinate, and methylarsonate) was monitored in different foodstuffs (rice, vegetables, algae, fish, crustacean, molluscs) before and after preparation using common kitchen practices. By measuring the water content of the foodstuff and by reporting arsenic concentrations on a dry weight base, we were able to distinguish between As release effects due to food preparation and As decrease due to changes in moisture content upon food preparation. Arsenic species were released to the broth during boiling, steaming, frying, or soaking of the food. Concentrations declined with maxima of 57% for total arsenic, 65% for inorganic As, and 32% for arsenobetaine. On the basis of a combination of our own results and literature data, we conclude that the extent of this release of arsenic species is species specific, with inorganic arsenic species being released most easily, followed by the small organic As species and the large organic As species.

  8. Preparing entangled states by Lyapunov control

    Science.gov (United States)

    Shi, Z. C.; Wang, L. C.; Yi, X. X.

    2016-12-01

    By Lyapunov control, we present a protocol to prepare entangled states such as Bell states in the context of cavity QED system. The advantage of our method is of threefold. Firstly, we can only control the phase of classical fields to complete the preparation process. Secondly, the evolution time is sharply shortened when compared to adiabatic control. Thirdly, the final state is steady after removing control fields. The influence of decoherence caused by the atomic spontaneous emission and the cavity decay is discussed. The numerical results show that the control scheme is immune to decoherence, especially for the atomic spontaneous emission from |2rangle to |1rangle . This can be understood as the state staying in an invariant subspace. Finally, we generalize this method in preparation of W state.

  9. Antioxidant potential of selected Spirulina platensis preparations.

    Science.gov (United States)

    Dartsch, Peter C

    2008-05-01

    Recent studies suggest that Spirulina, a unicellular blue-green alga, may have a variety of health benefits and therapeutic properties and is also capable of acting as an antioxidant and antiinflammatory agent. In this study, a cell-free and a cell-based test assay were used to examine the antioxidant and antiinflammatory properties of four selected Spirulina platensis preparations: (1) Biospirulina, (2) SpiruComplex, a preparation with naturally bound selenium, chromium and zinc, (3) SpiruZink, a preparation with naturally bound zinc, (4) Zinkspirulina + Acerola, a preparation with naturally bound zinc and acerola powder. The cell-free test assay used potassium superoxide as a donor for superoxide radicals, whereas the cell-based test assay used the formation of intracellular superoxide radicals of functional neutrophils upon stimulation by phorbol-12-myristate-13-acetate as a model to investigate the potential of Spirulina preparations to inactivate superoxide radicals. In accordance with the recommended daily dosage, test concentrations ranging from 50 to 1000 microg/mL were chosen. The results showed a dose-dependent inactivation of free superoxide radicals (antioxidant effect) as well as an antiinflammatory effect characterized by a dose-dependent reduction of the metabolic activity of functional neutrophils and a dose-dependent inactivation of superoxide radicals generated during an oxidative burst. The results demonstrate that the tested Spirulina preparations have a high antioxidant and antiinflammatory potential. Especially SpiruZink and Zinkspirulina + Acerola might be useful as a supportive therapeutic approach for reducing oxidative stress and/or the generation of oxygen radicals in the course of inflammatory processes.

  10. Preparation for Adoptive Parenthood with a Special-Needs Child: Role of Agency Preparation Tasks.

    Science.gov (United States)

    Sar, Bibhuti K.

    2000-01-01

    Examined tasks mothers of adopted special-needs children undertook to prepare for parenthood. Found mothers engaged in tasks related to learning about the child and participating in training. Overall preparedness was positively associated with assessment of child and family functioning. Findings pose implications for adoption preparation programs.…

  11. Preparation Methods: past and Potential Methods of Food Preparation for Space

    Science.gov (United States)

    Huber, C. S.

    1985-01-01

    The logical progression of development of space food systems during the Mercury, Gemini, Apollo, Skylab and Shuttle programs is outlined. The preparation methods which include no preparation to heating, cooling and freezing are reviewed. The introduction of some new and exciting technological advances is proposed, which should result in a system providing crew members with appetizing, safe, nutritious and convenient food.

  12. Specialized Preparation for Middle Level Teachers: A National Review of Teacher Preparation Programs

    Science.gov (United States)

    Howell, Penny B.; Faulkner, Shawn A.; Cook, Chris M.; Miller, Nicole C.; Thompson, Nicole L.

    2016-01-01

    Since William Alexander's (1963, 1995) call for attention to the need for specialized middle level teacher preparation in 1963, 45 states have created requirements for middle level certification, licensure, or endorsement (Association for Middle Level Education [AMLE], 2014) which have led to institutions of teacher preparation creating routes…

  13. Preparation of silver powder through glycerol process

    Indian Academy of Sciences (India)

    Amit Sinha; B P Sharma

    2005-06-01

    High purity fine silver powder with uniform particle morphology was prepared through glycerol process. The process involves reduction of silver nitrate by glycerol under atmospheric conditions at a temperature below 175°C. Glycerol, in this process, acts as a solvent as well as a reducing agent. The powders prepared through this process were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and chemical analysis. The powders were well crystalline and contained oxygen, carbon and hydrogen as impurities. Overall purity was better than 99.9%. The yield of silver powder was better than 99%.

  14. Preparation modifications for damaged vital posterior teeth.

    Science.gov (United States)

    Shillingburg, H T; Jacobi, R; Brackett, S E

    1985-04-01

    The preservation of a severely damaged tooth with a cast restoration requires that the preparation be modified to make use of remaining tooth structure. Preexisting preparation features, such as boxes and isthmuses, and new ones, such as boxes, grooves, and pin holes, are employed to provide adequate retention and resistance. When destruction of coronal tooth structure exceeds one-half of the clinical crown, a pin-retained amalgam or composite resin core should be used to build up the tooth to receive a cast restoration.

  15. Preparation of zeolite covered cellulose fibers

    Energy Technology Data Exchange (ETDEWEB)

    Mintova, S.; Valtchev, V. [Institute of Applied Mineralogy, Sofia (Bulgaria)

    1995-12-01

    Membrane separation has proved to be an important technology in chemical industry. That is why the design of different type of zeolite containing membranes has received much attention during the last decade. Zeolite containing filters and membranes were prepared by embedding zeolite crystals with adhesive substances in the cellulose matrix. This communication discussed the preparation of zeolite containing cellulose materials by in situ crystallization. Discussed axe: (1) the effect of the vegetal fiber structure and chemical composition (2) the effect of the type of the zeolite coating; (3) the effect of the mechanical and chemical treatment of the fibers on the process of the fiber zeolite coating.

  16. Bone preparation at the KCCAMS laboratory

    Science.gov (United States)

    Beaumont, Will; Beverly, Robert; Southon, John; Taylor, R. E.

    2010-04-01

    Collagen purification by ultrafiltration [1] is becoming widely accepted as a superior 14C sample preparation method for removing environmental contamination from archaeological bone. We present an overview of bone sample preparation methods used at the KCCAMS laboratory, UC Irvine. Methods development data are also discussed, including results of tests of gelatinization temperature, evaluation of 10 kDa vs. 30 kDa molecular weight (MW) ultrafiltration, improvements to ultrafilter cleaning methods, tests of ultrafilter memory, and ultrafilter glycerin contamination. These tests were not intended to be exhaustive, but rather to show how standard procedures can be validated and improved with relatively little effort.

  17. Preservation and storage of prepared ballistic gelatine.

    Science.gov (United States)

    Mattijssen, E J A T; Alberink, I; Jacobs, B; van den Boogaard, Y

    2016-02-01

    The use of ballistic gelatine, generally accepted as a human muscle tissue simulant in wound ballistic studies, might be improved by adding a preservative (Methyl 4-hydroxybenzoate) which inhibits microbial growth. This study shows that replacing a part of the gelatine powder by the preservative does not significantly alter the penetration depth of projectiles. Storing prepared blocks of ballistic gelatine over time decreased the penetration depth of projectiles. Storage of prepared gelatine for 4 week already showed a significant effect on the penetration depth of projectiles.

  18. Bimetallic nanoparticles: Preparation, properties, and biomedical applications.

    Science.gov (United States)

    Nasrabadi, Hamid Tayefi; Abbasi, Elham; Davaran, Soodabeh; Kouhi, Mohammad; Akbarzadeh, Abolfazl

    2016-01-01

    Many studies of non-supported bimetallic nanoparticle (BMNP) dispersions, stabilized by ligands or polymers, and copolymers, were started only about 10 years ago. Several preparative procedures have been proposed, and full characterizations on BMNPs have been approved. Studies on BMNPs received huge attention from both scientific and technological communities because most of the NPs' catalytic activity depends on their structural aspects. In this study, we focus on the preparation, properties, and bio-application of BMNPs and introduction of the recent advance in these NPs.

  19. Preparing for thesis and viva: some practicalities.

    Science.gov (United States)

    Lee, Nancy-Jane

    2010-01-01

    Presenting a thesis and then undertaking the viva is challenging even for the most experienced of researchers. This paper offers stylistic practicalities, reflects on thesis and viva preparation, and discusses the research regulations and submission requirements of higher education institutions (HEIs). Issues such as the use of the first person, how best to locate research in the professional setting, research regulations and codes of practice are discussed, along with some guiding principles to enable effective viva preparation. It is derived from experience as a doctoral student, supervisor and examiner, and focuses on questions most frequently asked by doctoral students.

  20. [Research on the preparative method of Arctigenin].

    Science.gov (United States)

    Zhang, Li-Ying; Yang, Yi-Shun; Zhang, Tong; Ding, Yue; Cai, Zhen-Zhen; Tao, Jian-Sheng

    2012-03-01

    To research on the preparation of Arctigenin in vitro. Took enzyme concentration, time course and substrate concentration as investigation factors, used Box-Behnken design-response surface methodology to optimize the enzyme hydrolysis path of Arctigenin. The best operational path for Arctigenin was as follows: the temperature was 50 degrees C, pH was 4.8, enzyme concentration was 0.44 U/mL, time course was 46.81 min, substrate concentration was 0.29 mg/mL, the conversion rate was 90.94%. This research can be regarded as a referencein preparing Arctigenin in vitro.

  1. Preparation of Reference Material 8504, Transformer Oil

    OpenAIRE

    Poster, Dianne L.; Schantz, Michele M.; Wise, Stephen A.

    2005-01-01

    A new reference material (RM), RM 8504, has been prepared for use as a diluent oil with Aroclors in transformer oil Standard Reference Materials (SRMs) 3075 to 3080 and SRM 3090 when developing and validating methods for the determination of polychlorinated biphenyls (PCBs) as Aroclors in transformer oil or similar matrices. SRMs 3075-3080 and SRM 3090 consist of individual Aroclors in the same transformer oil that was used to prepare RM 8504. A unit of RM 8504 consists of one bottle containi...

  2. Preparation of Reference Material 8504, Transformer Oil.

    Science.gov (United States)

    Poster, Dianne L; Schantz, Michele M; Wise, Stephen A

    2005-01-01

    A new reference material (RM), RM 8504, has been prepared for use as a diluent oil with Aroclors in transformer oil Standard Reference Materials (SRMs) 3075 to 3080 and SRM 3090 when developing and validating methods for the determination of polychlorinated biphenyls (PCBs) as Aroclors in transformer oil or similar matrices. SRMs 3075-3080 and SRM 3090 consist of individual Aroclors in the same transformer oil that was used to prepare RM 8504. A unit of RM 8504 consists of one bottle containing approximately 100 mL of transformer oil. No additional constituents have been added to the oil.

  3. Bone preparation at the KCCAMS laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Beaumont, Will, E-mail: wbeaumon@uci.ed [Earth System Science Dept., University of California, B321 Croul Hall, Irvine, CA 92697-3100 (United States); Beverly, Robert; Southon, John [Earth System Science Dept., University of California, B321 Croul Hall, Irvine, CA 92697-3100 (United States); Taylor, R.E. [Department of Anthropology, University of California, Riverside, CA 92521 (United States)

    2010-04-15

    Collagen purification by ultrafiltration is becoming widely accepted as a superior {sup 14}C sample preparation method for removing environmental contamination from archaeological bone. We present an overview of bone sample preparation methods used at the KCCAMS laboratory, UC Irvine. Methods development data are also discussed, including results of tests of gelatinization temperature, evaluation of 10 kDa vs. 30 kDa molecular weight (MW) ultrafiltration, improvements to ultrafilter cleaning methods, tests of ultrafilter memory, and ultrafilter glycerin contamination. These tests were not intended to be exhaustive, but rather to show how standard procedures can be validated and improved with relatively little effort.

  4. PlayMolecule ProteinPrepare: A Web Application for Protein Preparation for Molecular Dynamics Simulations.

    Science.gov (United States)

    Martínez-Rosell, Gerard; Giorgino, Toni; De Fabritiis, Gianni

    2017-07-24

    Protein preparation is a critical step in molecular simulations that consists of refining a Protein Data Bank (PDB) structure by assigning titration states and optimizing the hydrogen-bonding network. In this application note, we describe ProteinPrepare, a web application designed to interactively support the preparation of protein structures. Users can upload a PDB file, choose the solvent pH value, and inspect the resulting protonated residues and hydrogen-bonding network within a 3D web interface. Protonation states are suggested automatically but can be manually changed using the visual aid of the hydrogen-bonding network. Tables and diagrams provide estimated pKa values and charge states, with visual indication for cases where review is required. We expect the graphical interface to be a useful instrument to assess the validity of the preparation, but nevertheless, a script to execute the preparation offline with the High-Throughput Molecular Dynamics (HTMD) environment is also provided for noninteractive operations.

  5. [Study on the appropriate parameters of automatic full crown tooth preparation for dental tooth preparation robot].

    Science.gov (United States)

    Yuan, F S; Wang, Y; Zhang, Y P; Sun, Y C; Wang, D X; Lyu, P J

    2017-05-09

    Objective: To further study the most suitable parameters for automatic full crown preparation using oral clinical micro robot. Its purpose is to improve the quality of automated tooth preparing for the system and to lay the foundation for clinical application. Methods: Twenty selected artificial resin teeth were used as sample teeth. The micro robot automatic tooth preparation system was used in dental clinic to control the picosecond laser beam to complete two dimensional cutting on the resin tooth sample according to the motion planning path. Using the laser scanning measuring microscope, each layer of cutting depth values was obtained and the average value was calculated. The monolayer cutting depth was determined. The three-dimensional (3D) data of the target resin teeth was obtained using internal scanner, and the CAD data of full-crown tooth preparation was designed by CAD self-develged software. According to the depth of the single layer, 11 complete resin teeth in phantom head were automatically prepared by the robot controlling the laser focused spot in accordance with the layer-cutting way. And the accuracy of resin tooth preparation was evaluated with the software. Using the same method, monolayer cutting depth parameter for cutting dental hard tissue was obtained. Then 15 extracted mandibular and maxillary first molars went through automatic full crown tooth preparation. And the 3D data of tooth preparations were obtained with intra oral scanner. The software was used to evaluate the accuracy of tooth preparation. Results: The results indicated that the single cutting depth of cutting resin teeth and in vitro teeth by picosecond laser were (60.0±2.6) and (45.0±3.6) μm, respectively. Using the tooth preparation robot, 11 artificial resin teeth and 15 complete natural teeth were automatically prepared, and the average time were (13.0±0.7), (17.0±1.8) min respectively. Through software evaluation, the average preparation depth of the occlusal surface

  6. Method of preparing a porous silicon carbide

    NARCIS (Netherlands)

    Moene, R.; Tazelaar, F.W.; Makkee, M.; Moulijn, J.A.

    1994-01-01

    Abstract of NL 9300816 (A) Described is a method of preparing a porous silicon carbide suitable for use as a catalyst or as a catalyst support. Porous carbon is provided with a catalyst which is suitable for catalysing gasification of carbon with hydrogen, and with a catalyst suitable for cataly

  7. Preparation of polyvinylpyrrodione microspheres by dispersion polymerization

    Institute of Scientific and Technical Information of China (English)

    Linfeng ZHAI; Tiejun SHI; Hualin WANG

    2009-01-01

    The preparation of polyvinylpyrrolidone (PVP) microspheres in ethyl acetate by dispersion polymerization with N-vinylpyrrolidone (NVP) as initial monomer, poly(N-vinylpyrrolidone-co-vinyl acetate) (P (NVP-co-VAc)) as dispersant, and 2, 2'-azobisisobutyr-onitrile(AIBN) as initiator is reported. The influences of monomer concentration, dispersant concentration and initiator concentration on the size of PVP microspheres as well as the monomer conversion were studied. The structure and properties of PVP microspheres were analyzed. The results show that the prepared PVP micro-spheres have a mean diameter of 3-4 μm. With an increase in NVP concentration, the size and the molecular weight of the PVP microspheres as well as the monomer conversion all increase. With increasing P(NVP-co-VAc) concentra-tions, the PVP molecular weight and monomer conversion both increase while the size of the microspheres becomes smaller. As the concentration of AIBN increases, the microsphere size and monomer conversion increase whereas the PVP molecular weight decreases. The PVP prepared by dispersion polymerization has a crystal structure, and its molecular weight is lower compared to that prepared by solution polymerization.

  8. Batter and method for preparing a pasta

    NARCIS (Netherlands)

    Wind, P.; Linden, van der E.

    2011-01-01

    This invention describes a batter that is suitable for preparing a pasta. The batter comprises water, a starch and a protein, whereby the weight ratio between the protein and the total amount of starch in the batter is represented by the symbol y and whereby the weight percentage of the total amount

  9. Preparing the Collection for Retrospective Conversion.

    Science.gov (United States)

    Kroll, Carol

    1990-01-01

    Discusses the planning and preparation necessary to ensure a cost-effective and accurate retrospective conversion of school library catalogs. Suggested strategies include heavy weeding, developing accurate standardized shelf lists with an entry for each holding, and standardizing entries within a school district or region. (CLB)

  10. Process for the preparation of purified inulin

    NARCIS (Netherlands)

    Leeuwen, van M.B.; Slaghek, T.M.; Wit, de D.; Kuzee, H.C.; Raaijmakers, H.W.C.

    1997-01-01

    A process is described for the preparation of oligosaccharides, in particular inulin, which are virtually free from mono- and disaccharides, such as glucose, fructose and sucrose, in that the oligosaccharide is subjected to hydrolysis in the presence of a solid acid catalyst, in particular a strongl

  11. Automated sample preparation for CE-SDS.

    Science.gov (United States)

    Le, M Eleanor; Vizel, Alona; Hutterer, Katariina M

    2013-05-01

    Traditionally, CE with SDS (CE-SDS) places many restrictions on sample composition. Requirements include low salt content, known initial sample concentration, and a narrow window of final sample concentration. As these restrictions require buffer exchange for many sample types, sample preparation is often tedious and yields poor sample recoveries. To improve capacity and streamline sample preparation, an automated robotic platform was developed using the PhyNexus Micro-Extractor Automated Instrument (MEA) for both the reduced and nonreduced CE-SDS assays. This automated sample preparation normalizes sample concentration, removes salts and other contaminants, and adds the required CE-SDS reagents, essentially eliminating manual steps during sample preparation. Fc-fusion proteins and monoclonal antibodies were used in this work to demonstrate benefits of this approach when compared to the manual method. With optimized conditions, this application has demonstrated decreased analyst "hands on" time and reduced total assay time. Sample recovery greater than 90% can be achieved, regardless of initial composition and concentration of analyte.

  12. Guidelines for Transitional Education Plan Preparation

    Science.gov (United States)

    Lattanzio, Raphaëlle Martinez; Bethke, Lynne; Haas, Anna; Perrier, Janne Kjaersgaard; De Grauwe, Anton; Sigsgaard, Morten; Bird, Lyndsay; Coury, Diane; Gay, Dorian; MacEwan, Leonora; Seeger, Anna

    2016-01-01

    The "Guidelines for the Transitional Education Plan Preparation" are the result of an extensive consultation process and the product of fruitful guidance and contributions from key partners active in the field of education in emergencies and protracted crises. The new global education agenda 2030 places strong emphasis on countries…

  13. Texas Educational Reform: The Teacher Preparation Aspect.

    Science.gov (United States)

    Lindahl, Ronald A.; Descamps, Jorge

    1988-01-01

    Recent Texas legislation eliminates undergraduate degrees in education and requires academic majors for certification. Intended and unplanned consequences of the legislation are examined. Discussed are implications for teacher shortages, accreditation of teacher preparation institutions, specific areas (e.g., physical education, elementary…

  14. Readiness and Preparation for Beginning Algebra.

    Science.gov (United States)

    Rotman, Jack W.

    Drawing from experience at Lansing Community College (LCC), this paper discusses how to best prepare students for success in a beginning algebra course. First, an overview is presented of LCC's developmental math sequence, which includes Basic Arithmetic (MTH 008), Pre-Algebra (MTH 009), Beginning Algebra (MTH 012), and Intermediate Algebra (MTH…

  15. Process for the preparation of aromatic compounds

    NARCIS (Netherlands)

    Schenk, N.J.; Biesbroek, Arnold; Heeres, André; Heeres, Hero

    2015-01-01

    Aromatic compounds are prepared from a feed stream comprising biomass or a mixture of biomass and synthetic polymer in a process, comprising: a) subjecting the feed stream to a pyrolysis treatment in the presence of a cracking catalyst to yield a vaporous fraction comprising hydrocarbons with

  16. Radappertization of pancreatin preparations by gamma irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Quehl, A.; Leuchtenberger, A.; Schalinatus, E. (Akademie der Wissenschaften der DDR, Bergholz-Rehbruecke. Zentralinstitut fuer Ernaehrung)

    1985-01-01

    The lipase preparation pancreatin was irradiated with doses from 5 to 15 kGy for radappertization. There was a dose-response relationship concerning the number of germs as well as the enzyme activity. As to the germ content a one year storage at 4/sup 0/ C proved to be favorable.

  17. PPT: The Preschool Preparation and Transition Project.

    Science.gov (United States)

    Noonan, Mary Jo; Ratokalau, Nancy B.

    1992-01-01

    The University of Hawaii Department of Special Education conducted the Preschool Preparation and Transition Project, a federally funded demonstration program, to support families and their children with special needs in the transition from infant programs to least restrictive preschool placements. The program addressed this goal through three…

  18. EFFECT OF PREPARATION TEMPERATURE AND IONS DOPING ...

    African Journals Online (AJOL)

    B. S. Chandravanshi

    2015 Chemical Society of Ethiopia ... Co-M-Zr-B (M: Cr, Mo and W) as quaternary catalysts are also prepared in order to ... on chemical and physical properties. ... we have synthesized Co-La-Zr-B quaternary amorphous nano alloy [29], PVP ... A typical catalysis experiment was carried as follows: catalyst (6 mg), NaBH4 ...

  19. Student Preparation for the International Environmental Profession

    Science.gov (United States)

    Thomas, Ian; Meehan, Barry

    2010-01-01

    Many universities have strategies for exposing students to international experiences, but little is reported on their implementation. One example of an implemented activity is the multidisciplinary research project for undergraduate environment students, at RMIT University, that both prepares students to work in the environment profession and…

  20. A Paradigm for EST Materials Preparation.

    Science.gov (United States)

    Carreon, Edwina S.; Balarbar, Corazon V.

    In many countries, suitable English for special purposes (ESP) textbooks and materials are difficult to find. ESP teachers and program coordinators often must develop their own materials, but preparing such materials requires training. One model that has served as a guide to numerous ESP materials projects is the Hutchinson and Waters' model. This…

  1. 21 CFR 113.81 - Product preparation.

    Science.gov (United States)

    2010-04-01

    ... Production and Process Controls § 113.81 Product preparation. (a) Before using raw materials and ingredients susceptible to microbiological contamination, the processor shall ensure that those materials and ingredients... and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR...

  2. (Academic) preparation of/for students

    DEFF Research Database (Denmark)

    Singla, Rashmi; Engstrøm, Emma; Sandermann, Weibke

    of both cases include the methodological empirical approach, emphasis on the process of ‘othering’, ethnocentrism and ethno- racial representations. The first case deals with pre-departure preparation inspired by MUD (memory, understanding and doing) principles, while the second deals with the ongoing in...

  3. Effective Teaching: Preparation and Implementation. Fourth Edition

    Science.gov (United States)

    Hunt, Gilbert H.; Wiseman, Dennis G.; Touzel, Timothy J.

    2009-01-01

    Schools today have transcended from the chalkboard to the whiteboard and are populated by students who are not frightened to use the technology of this new age of learning. During this period of dynamic change, teachers must be ready to meet the challenges of preparing students for a global society characterized by diversity and ever-increasing…

  4. Preparing Teachers to Learn from Teaching

    Science.gov (United States)

    Hiebert, James; Morris, Anne K.; Berk, Dawn; Jansen, Amanda

    2007-01-01

    The authors propose a framework for teacher preparation programs that aims to help prospective teachers learn how to teach from studying teaching. The framework is motivated by their interest in defining a set of competencies that provide a deliberate, systematic path to becoming an effective teacher over time. The framework is composed of four…

  5. Preparation of rough microsomes from rat liver.

    Science.gov (United States)

    Sabatini, David D

    2014-08-01

    This protocol describes how to prepare rat liver rough microsomes that contain undegraded membrane-bound polysomes and can function very well in an in vitro translation system. It uses endogenous ribonuclease inhibitor in all steps, avoiding pelleting rough microsomes in all steps and sacrificing good recovery.

  6. Infusing Preservice Teacher Preparation with Service Learning

    Science.gov (United States)

    Briody, Jennifer

    2005-01-01

    This research targeted the impact of service-learning experiences in one course of a teacher preparation program in an urban, private university. Participants chose either an indirect (food or toy drive) or direct (food pantry or homeless shelter) service-learning experience. Twenty-four undergraduate and graduate education majors participated in…

  7. Translanguaging in English Academic Writing Preparation

    Science.gov (United States)

    Adamson, John; Coulson, David

    2015-01-01

    We investigate translanguaging (i.e. the co-use of first and second languages) in a Content and Language Integrated Learning course, as a pragmatic means to promote the skill of young university students in extended critical academic writing. We aimed to prepare new undergraduate students (n = 180) for courses where partial English-medium…

  8. Temporal Preparation, Response Inhibition and Impulsivity

    Science.gov (United States)

    Correa, Angel; Trivino, Monica; Perez-Duenas, Carolina; Acosta, Alberto; Lupianez, Juan

    2010-01-01

    Temporal preparation and impulsivity involve overlapping neural structures (prefrontal cortex) and cognitive functions (response inhibition and time perception), however, their interrelations had not been investigated. We studied such interrelations by comparing the performance of groups with low vs. high non-clinical trait impulsivity during a…

  9. Wound bed preparation from a clinical perspective

    Directory of Open Access Journals (Sweden)

    A S Halim

    2012-01-01

    Full Text Available Wound bed preparation has been performed for over two decades, and the concept is well accepted. The ′TIME′ acronym, consisting of tissue debridement, i nfection or inflammation, moisture balance and edge effect, has assisted clinicians systematically in wound assessment and management. While the focus has usually been concentrated around the wound, the evolving concept of wound bed preparation promotes the treatment of the patient as a whole. This article discusses wound bed preparation and its clinical management components along with the principles of advanced wound care management at the present time. Management of tissue necrosis can be tailored according to the wound and local expertise. It ranges from simple to modern techniques like wet to dry dressing, enzymatic, biological and surgical debridement. Restoration of the bacterial balance is also an important element in managing chronic wounds that are critically colonized. Achieving a balance moist wound will hasten healing and correct biochemical imbalance by removing the excessive enzymes and growth factors. This can be achieved will multitude of dressing materials. The negative pressure wound therapy being one of the great breakthroughs. The progress and understanding on scientific basis of the wound bed preparation over the last two decades are discussed further in this article in the clinical perspectives.

  10. Vocational Preparation Teacher Manual. Missouri LINC.

    Science.gov (United States)

    Wallace, Steve; And Others

    This document defines the role and responsibilities of Missouri's vocational preparation teachers as they work with disadvantaged and handicapped students in vocational education programs and offers advice on how they can fulfill their role and responsibilities. Following the introduction is the questionnaire used in a survey of vocational…

  11. Interdisciplinary Training: Preparing Counselors for Collaborative Practice

    Science.gov (United States)

    Okech, Jane E. Atieno; Geroski, Anne M.

    2015-01-01

    This article utilizes one counselor education program's experience as a framework for exploring how to prepare counselors to work in interdisciplinary teams. Based on an interdisciplinary training program that involves faculty and graduate students from counseling, social work, nursing, internal medicine and family medicine, the article explores…

  12. Preparation of flat carbon support films

    NARCIS (Netherlands)

    Koning, RI; Oostergetel, GT; Brisson, A

    2003-01-01

    Wrinkling of carbon support films is known to limit the resolution of electron microscopy images of protein two-dimensional crystals. The origin of carbon wrinkling during preparation of the support films was investigated by reflected light microscopy. We observed that carbon films go through severa

  13. Preparing School Personnel: Early Childhood Education.

    Science.gov (United States)

    Poliakoff, Lorraine, Comp.

    This bibliography contains 25 citations of published and unpublished documents ranging in date from 1964 through 1969 on "the means and methods by which school personnel are prepared to work with preschool age children in such settings as Head Start programs and nursery and kindergarten classes." Citations are subsumed under three headings: 1)…

  14. Marriage Preparation: Factors Associated with Consumer Satisfaction.

    Science.gov (United States)

    Russell, Mary N.; Lyster, Rosanne Farnden

    1992-01-01

    Evaluated marriage preparation program to determine overall consumer satisfaction with the program, satisfaction with specific content areas, and extent to which consumer characteristics affected satisfaction ratings. Results of survey of 196 couples revealed high overall satisfaction levels, variability in satisfaction by content area, and…

  15. Impact of Teacher Preparation upon Teacher Efficacy

    Science.gov (United States)

    Redmon, Robert J.

    2007-01-01

    A cohort of students in a teacher preparation program completed questionnaires measuring their feelings of teacher self efficacy at three points in the program. Results suggest that pre-service teachers' feelings of self efficacy do improve as a result of their participation in such programs. (Contains 1 figure and 1 table. Teacher Efficacy…

  16. Preparation of DPPE-Stabilized Gold Nanoparticles

    Science.gov (United States)

    Dungey, Keenan E.; Muller, David P.; Gunter, Tammy

    2005-01-01

    An experiment is presented that introduces students to nanotechnology through the preparation of nanoparticles and their visualization using transmission electron microscopy (TEM). The experiment familiarizes the students with nonaqueous solvents, biphasic reactions, phase-transfer agents, ligands to stabilize growing nanoparticles, and bidentate…

  17. PREPARATION OF HIGH PURITY MULLITE CERAMICS

    OpenAIRE

    Rodrigo, P.; Boch, P.

    1986-01-01

    Preparation of mullite ceramics by reaction-sintering of alumina silica shows the necessity of favoring densification over mullitisation. Different Al2O3/SiO2 ratios have been studied. The influence of additives, iron oxide and zirconium oxide, has been examined.

  18. Preparation, characterisation and application of polyaminesilica ...

    African Journals Online (AJOL)

    template used in the preparation process can be recovered and reused [10]. Interest in ... ethanol and 2.94 mol of deionised water). .... is the occurrence of peaks attributable to residual –OEt groups, peaks that were also observed in supported ...

  19. Methods for preparation of carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Rakov, Eduard G [D.I. Mendeleev Russian University of Chemical Technology, Moscow (Russian Federation)

    2000-01-31

    The most important methods of synthesis and purification of carbon nanotubes, a new form of material, are described. The prospects for increasing the scale of preparation processes and for more extensive application of nanotubes are evaluated. The bibliography includes 282 references.

  20. Method of preparing a porous silicon carbide

    NARCIS (Netherlands)

    Moene, R.; Tazelaar, F.W.; Makkee, M.; Moulijn, J.A.

    1994-01-01

    Abstract of NL 9300816 (A) Described is a method of preparing a porous silicon carbide suitable for use as a catalyst or as a catalyst support. Porous carbon is provided with a catalyst which is suitable for catalysing gasification of carbon with hydrogen, and with a catalyst suitable for cataly

  1. Mechanical site preparation for forest restoration

    Science.gov (United States)

    Magnus Lof; Daniel C. Dey; Rafael M. Navarro; Douglass F. Jacobs

    2012-01-01

    Forest restoration projects have become increasingly common around the world and planting trees is almost always a key component. Low seedling survival and growth may result in restoration failures and various mechanical site preparation techniques for treatment of soils and vegetation are important tools used to help counteract this. In this article, we synthesize the...

  2. Preparation of aluminium lakes by electrocoagulation

    Directory of Open Access Journals (Sweden)

    Prapai Pradabkham

    2008-07-01

    Full Text Available Aluminium lakes have been prepared by electrocoagulation employing aluminium as electrodes. The electrocoagulation is conducted in an aqueous alcoholic solution and is completed within one hour. The dye content in the lake ranges approximately between 4-32%.

  3. Magnetic hyaluronate hydrogels: preparation and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Tóth, Ildikó Y., E-mail: Ildiko.Toth@chem.u-szeged.hu; Veress, Gábor; Szekeres, Márta; Illés, Erzsébet; Tombácz, Etelka, E-mail: tombacz@chem.u-szeged.hu

    2015-04-15

    A novel soft way of hyaluronate (HyA) based magnetic hydrogel preparation was revealed. Magnetite nanoparticles (MNPs) were prepared by co-precipitation. Since the naked MNPs cannot be dispersed homogenously in HyA-gel, their surface was modified with natural and biocompatible chondroitin-sulfate-A (CSA) to obtain CSA-coated MNPs (CSA@MNPs). The aggregation state of MNPs and that loaded with increasing amount of CSA up to 1 mmol/g was measured by dynamic light scattering at pH~6. Only CSA@MNP with ≥0.2 mmol/g CSA content was suitable for magnetic HyA-gel preparation. Rheological studies showed that the presence of CSA@MNP with up to 2 g/L did not affect the hydrogel's rheological behavior significantly. The results suggest that the HyA-based magnetic hydrogels may be promising formulations for future biomedical applications, e.g. as intra-articular injections in the treatment of osteoarthritis. - Highlights: • Novel hyaluronate(HyA)-based biocompatible magnetic hydrogels were prepared. • Chondroitin-sulfate-A coating is needed to disperse magnetite particles in HyA-gel. • Rheological behavior of hydrogels was independent of the magnetite content (<2 g/L). • Gels remained in stable and homogeneously dispersed state even after 90 days storage. • Magnetic HyA-gels are promising candidates for use as intra-articular injection.

  4. Formulation, Preparation, and Characterization of Polyurethane Foams

    Science.gov (United States)

    Pinto, Moises L.

    2010-01-01

    Preparation of laboratory-scale polyurethane foams is described with formulations that are easy to implement in experiments for undergraduate students. Particular attention is given to formulation aspects that are based on the main chemical reactions occurring in polyurethane production. This allows students to develop alternative formulations to…

  5. Preparing English Language Learners for Complex Reading

    Science.gov (United States)

    Silva, Janice; Delleman, Paul; Phesia, Andria

    2013-01-01

    Although the Common Core state standards' goal of ensuring that every student leaves high school prepared to meet the demands of college and career is laudable, it's daunting for teachers who serve English language learners. The authors, educators at a private bilingual school in Mexico, describe how they used short excerpts of longer works giving…

  6. Preparation of Uranous Nitrate by Membrane Electrolysis

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    U(Ⅳ) is a main reductant used in the Purex process. Electrochemical method is a sound way to prepare U(Ⅳ) due to it is easy to control and monitor the produce process and not using other additives. However, in traditional electrochemical method, U(Ⅳ) yield is usually between 60%-70%.

  7. 12 CFR 917.8 - Budget preparation.

    Science.gov (United States)

    2010-01-01

    ... and Banking FEDERAL HOUSING FINANCE BOARD GOVERNANCE AND MANAGEMENT OF THE FEDERAL HOME LOAN BANKS POWERS AND RESPONSIBILITIES OF BANK BOARDS OF DIRECTORS AND SENIOR MANAGEMENT § 917.8 Budget preparation... interest by keeping its costs to an efficient and effective minimum. (b) No delegation of budget...

  8. Deterministic Tripartite Controlled Remote State Preparation

    Science.gov (United States)

    Sang, Ming-huang; Nie, Yi-you

    2017-07-01

    We demonstrate that a seven-qubit entangled state can be used to realize the deterministic tripartite controlled remote state preparation by performing only Pauli operations and single-qubit measurements. In our scheme, three distant senders can simultaneously and deterministically exchange their quantum state with the other senders under the control of the supervisor.

  9. Postbaccalaureate Preparation and Performance in Medical School.

    Science.gov (United States)

    Hojat, Mohammadreza; And Others

    1990-01-01

    A study was conducted of 610 medical students to determine whether postbaccalaureate preparation before matriculation in medical school effected student performance. Results showed lower achievement on some measures of performance in medical school by those who had taken nondegree postbaccalaureate courses. Implications for admission decisions are…

  10. Preparation of Several Tritiated Macromolecular Compounds

    Institute of Scientific and Technical Information of China (English)

    CHEN; Bao-jun; YU; Ning-wen; FAN; Cai-yun

    2015-01-01

    Tritiated compounds are widely used in drug metabolism and pharmacokinetic studies.They play an important role in new drug research.Isotope exchange method is a very effective method for the preparation of tritiated compounds.It is particularly suitable for labeling macromolecule

  11. Professional Preparation: A Process of Discovery.

    Science.gov (United States)

    Wendt, Janice

    Self awareness is a key element in the effectiveness of teacher performance. To a large extent, however, individual psychology and the growth process have been neglected in the preparation of teachers. Four guidelines can aid prospective teachers to gain strengths they will need in the classroom. The first is increasing student teachers' autonomy…

  12. Preparing for a crisis: crisis team development.

    Science.gov (United States)

    Calarco, C

    1999-02-01

    Emergency preparedness in the school setting necessitates the formation and development of a Crisis Team that will be prepared to assume critical roles in the event of a crisis. This paper discusses the school Crisis Team, including member identification and responsibilities, and the relationship of the Crisis Team to the school crisis plan and policies.

  13. Batter and method for preparing a pasta

    NARCIS (Netherlands)

    Wind, P.; Linden, van der E.

    2011-01-01

    This invention describes a batter that is suitable for preparing a pasta. The batter comprises water, a starch and a protein, whereby the weight ratio between the protein and the total amount of starch in the batter is represented by the symbol y and whereby the weight percentage of the total amount

  14. Perylene Nanoparticles Prepared by Reprecipitation Method

    Institute of Scientific and Technical Information of China (English)

    JI,Xue-Hai(纪学海); FU,Hong-Bing(付红兵); XIE,Rui-Min(谢锐敏); XIAO,De-Bao(肖德宝); YAO,Jian-Nian(姚建年)

    2002-01-01

    Perylene nanoparticles with different sizes were prepared by reprecipitation method. It is found that the nanoparticles show size-dependent optical property. Electron diffraction patterns indicate that all the nanoparticles of different sizes are in crystalline state. The rapid growth of the nanoparticles during the agingg process could be slowed down effectively by the addition of cationic or anionic surfactants.

  15. Towards a Philosophy of Music Teacher Preparation.

    Science.gov (United States)

    Parr, N. Carlotta

    1999-01-01

    Summarizes six principles that might serve as a theoretical framework supporting a new vision for the purposes and processes of music teacher preparation. Draws the principles from the conceptions of learning and teaching of Jerome Bruner, Maxine Greene, and Vernon A. Howard. Provides background information on their ideas. (CMK)

  16. Process for the preparation of alkyl glycosides

    NARCIS (Netherlands)

    De Goede, A.T.J.; Van der Leij, I.G.; Van der Heijden, A.M.; Van Rantwijk, F.; Van Bekkum, H.

    1996-01-01

    Abstract of WO 9636640 (A2) The present invention relates to a process for the preparation of alkyl glycosides by reacting an alcohol with a saccharide or a lower-alkyl glycoside in the presence of a catalyst, wherein the catalyst is a mesoporous silica-based molecular sieve material. This proce

  17. Multicultural Education: Teachers' Perceptions and Preparation

    Science.gov (United States)

    Alismail, Halah Ahmed

    2016-01-01

    This paper focuses on theory and practice in multicultural education as it pertains to the preparation of preservice teachers. The literature reviews the history and definition of multiculturalism and investigates multiple theoretical frameworks around the ongoing debate and issues of multicultural education. Teachers' perceptions of multicultural…

  18. Video Verdi: Preparing for an Opera Telecast.

    Science.gov (United States)

    Hostetter, Sarah

    1979-01-01

    Provides specific suggestions to music teachers on preparing their students to view an opera broadcast on television, including use of other teachers or community personnel to provide background information. Approaches are outlined for introducing students to an opera's plot, music, design, costumes, makeup, lighting, and staging. (SJL)

  19. Teaching Dispositions: Shared Understanding for Teacher Preparation

    Science.gov (United States)

    DeMuth, Lynn

    2012-01-01

    This qualitative phenomenological study explored the perceptions of 16 high-performing teachers related to teaching dispositions, effects of dispositions on teaching and learning, and recommendations for assessment of teaching dispositions during teacher preparation. Participants' perceptions were gathered using six guided interview questions…

  20. Method of preparing a porous silicon carbide

    NARCIS (Netherlands)

    Moene, R.; Tazelaar, F.W.; Makkee, M.; Moulijn, J.A.

    1994-01-01

    Abstract of NL 9300816 (A) Described is a method of preparing a porous silicon carbide suitable for use as a catalyst or as a catalyst support. Porous carbon is provided with a catalyst which is suitable for catalysing gasification of carbon with hydrogen, and with a catalyst suitable for

  1. Preparation and evaluation of sulphonamide nonionic surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Ahmed, M. H. M.

    2010-07-01

    Alkyl (octyl, decyl and dodecyl; C{sub 8}, C{sub 1}0 and C{sub 1}2) benzene sulphonyl chloride was used in the preparation of a novel series of nonionic surfactants (IV-VI)a-c, (VII-IX) a-c and (X-XII)a-c. The preparations were completed by reacting each alkyl (C{sub 8}, C{sub 1}0 and C{sub 1}2) benzene sulphonyl chloride with ethanolamine to give (I-III) respectively. The resulting products were reacted separately with ethylene oxide in the presence of different (base KOH, Lewis acid SnCl4 and k10 clay) catalysts to produce different moles of nonionic surfactants (5, 7 and 9) in sequence corresponding to (IV-VI)a-c, (VII-IX) a-c and (X-XII)a-c respectively. The chemical structures of prepared nonionic surfactants were elucidated by IR and 1HNMR spectra. The surface activity, biodegradability and biological activities of the prepared compounds were investigated. The obtained data show that these compounds have good surface and biological activities as well as reasonable biodegradability properties. (Author) 30 refs.

  2. PREPARATION OF PuF$sub 3$

    Science.gov (United States)

    Benz, R.

    1964-03-01

    A process for preparing pure plutonium trifluoride is described in which a refractory plutonium compound is contacted with ammonium fluoride in a closed container at a pressure of at least 10 atmospheres and a temperature of about 550 deg C. (AEC)

  3. 7 CFR 1940.320 - Preparing EISs.

    Science.gov (United States)

    2010-01-01

    ... brief presentation of why they will not have a significant effect on the human environment or providing... impact statement; and (vii) Indicate the relationship between the timing of the preparation of... of the natural and social sciences and the environmental design arts. The disciplines of...

  4. Formulation, Preparation, and Characterization of Polyurethane Foams

    Science.gov (United States)

    Pinto, Moises L.

    2010-01-01

    Preparation of laboratory-scale polyurethane foams is described with formulations that are easy to implement in experiments for undergraduate students. Particular attention is given to formulation aspects that are based on the main chemical reactions occurring in polyurethane production. This allows students to develop alternative formulations to…

  5. The Preparation and Characterization of Materials.

    Science.gov (United States)

    Wold, Aaron

    1980-01-01

    Presents several examples illustrating different aspects of materials problems, including problems associated with solid-solid reactions, sintering and crystal growth, characterization of materials, preparation and characterization of stoichiometric ferrites and chromites, copper-sulfur systems, growth of single crystals by chemical vapor…

  6. Advanced Standards in Gifted Education Teacher Preparation

    Science.gov (United States)

    National Association for Gifted Children, 2013

    2013-01-01

    After mastering initial standards for the preparation of teachers of the gifted, many educators in gifted education continue their professional growth toward mastery of advanced professional standards at the post baccalaureate levels. For some this means deepening their understandings and expertise and adding new responsibilities for leadership…

  7. Towards a Philosophy of Music Teacher Preparation.

    Science.gov (United States)

    Parr, N. Carlotta

    1999-01-01

    Summarizes six principles that might serve as a theoretical framework supporting a new vision for the purposes and processes of music teacher preparation. Draws the principles from the conceptions of learning and teaching of Jerome Bruner, Maxine Greene, and Vernon A. Howard. Provides background information on their ideas. (CMK)

  8. Application of thermotolerant microorganisms for biofertilizer preparation.

    Science.gov (United States)

    Chen, Kuo-Shu; Lin, Yann-Shying; Yang, Shang-Shyng

    2007-12-01

    Intensive agriculture is practised in Taiwan, and compost application is very popular as a means of improving the soil physical properties and supplying plant nutrition. We tested the potential of inoculation with thermotolerant microorganisms to shorten the maturity and improve the quality of biofertilizer prepared by composting. Thermotolerant microorganisms were isolated from compost and reinoculated for the preparation of biofertilizer. The physical, chemical and biological properties of the biofertilizer were determined during composting. The effects of biofertilizer application on the growth and yield of rape were also studied. Among 3823 colonies of thermotolerant microorganisms, Streptomyces thermonitrificans NTU-88, Streptococcus sp. NTU-130 and Aspergillus fumigatus NTU-132 exhibited high growth rates and cellulolytic and proteolytic activities. When a mixture of rice straw and swine manure were inoculated with these isolates and composted for 61 days, substrate temperature increased initially and then decreased gradually during composting. Substrate pH increased from 7.3 to 8.5. Microbial inoculation enhanced the rate of maturity, and increased the content of ash and total and immobilized nitrogen, improved the germination rate of alfalfa seed, and decreased the content of total organic carbon and the carbon/nitrogen ratio. Biofertilizer application increased the growth and yield of rape. Inoculation of thermotolerant and thermophilic microorganisms to agricultural waste for biofertilizer preparation enhances the rate of maturity and improves the quality of the resulting biofertilizer. Inoculation of appropriate microorganisms in biofertilizer preparation might be usefully applied to agricultural situations.

  9. FISHprep: A Novel Integrated Device for Metaphase FISH Sample Preparation

    DEFF Research Database (Denmark)

    Shah, Pranjul Jaykumar; Vedarethinam, Indumathi; Kwasny, Dorota;

    2011-01-01

    We present a novel integrated device for preparing metaphase chromosomes spread slides (FISHprep). The quality of cytogenetic analysis from patient samples greatly relies on the efficiency of sample pre-treatment and/or slide preparation. In cytogenetic slide preparation, cell cultures are routin...... with minimal handling for metaphase FISH slide preparation....

  10. 21 CFR 184.1372 - Insoluble glucose isomerase enzyme preparations.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Insoluble glucose isomerase enzyme preparations... enzyme preparations. (a) Insoluble glucose isomerase enzyme preparations are used in the production of... additional requirements for enzyme preparations in the Food Chemicals Codex, 3d Ed. (1981), p. 107, which...

  11. Case study: Natural bodybuilding contest preparation.

    Science.gov (United States)

    Kistler, Brandon M; Fitschen, Peter J; Ranadive, Sushant M; Fernhall, Bo; Wilund, Kenneth R

    2014-12-01

    The purpose of this study was to document the physiological changes that occur in a natural bodybuilder during prolonged contest preparation for a proqualifying contest. During the 26-week preparation, the athlete undertook a calorically restrictive diet with 2 days of elevated carbohydrate intake per week, increased cardiovascular (CV) training, and attempted to maintain resistance-training load. The athlete was weighed twice a week and body composition was measured monthly by DXA. At baseline and every 2 weeks following CV structure and function was measured using a combination of ultrasound, applanation tonometry, and heart rate variability (HRV). Cardiorespiratory performance was measured by VO(2)peak at baseline, 13 weeks, and 26 weeks. Body weight (88.6 to 73.3 Kg, R(2) = .99) and percent body fat (17.5 to 7.4%) were reduced during preparation. CV measurements including blood pressure (128/61 to 113/54 mmHg), brachial pulse wave velocity (7.9 to 5.8m/s), and measures of wave reflection all improved. Indexed cardiac output was reduced (2.5 to 1.8L/m(2)) primarily due to a reduction in resting heart rate (71 to 44 bpm), and despite an increase in ejection faction (57.9 to 63.9%). Assessment of HRV found a shift in the ratio of low to high frequency (209.2 to 30.9%). Absolute VO2 was minimally reduced despite weight loss resulting in an increase in relative VO2 (41.9 to 47.7 ml/Kg). In general, this prolonged contest preparation technique helped the athlete to improve body composition and resulted in positive CV changes, suggesting that this method of contest preparation appears to be effective in natural male bodybuilders.

  12. Improving adherence to surgical hand preparation.

    Science.gov (United States)

    Kramer, A; Hübner, N; Below, H; Heidecke, C-D; Assadian, O

    2008-10-01

    At present, no universal agreement on detailed practice for surgical hand preparation exists. In order to fill this gap, in 2002 a Franco-German recommendation for surgical hand preparation was published as a first step towards a generally accepted European recommendation. Based on an assessment of the actual literature, a protocol for surgical hand preparation is discussed with the aim to recommend evidence-based standard procedures including prerequisites, washing and disinfection phase, and its practical implementation. In contrast to hygienic hand disinfection, for surgical hand preparation compliance is not an issue, since it mostly is regarded as a ceremony which is carried out without exception. Nevertheless, the following factors influence acceptance and efficacy: skin tolerance, ease of use, duration of procedure, and recommended time), potential for impaired efficacy due to incorrect performance of the procedure, possibility of systemic risks and irritating potential by applied preparations, religious restrictions, ecological aspects, costs and safety. Here, we report our experience with the introduction of a new hand preparation regime in all surgical disciplines in our university hospital based on the above factors. The following statements were evaluated: 1) The immediate efficacy of an alcohol-based hand disinfectant is impaired by a preceding hand wash for up to 10 minutes. Therefore hands should not be routinely washed before the disinfection period unless there is a good reason for it such as visible soiling. 2) A shortened application time (1.5 minutes) is equal to 3 min in terms of efficacy. 3) Hands should be air dried before gloves are put on, otherwise the perforation rate of gloves will increase. 4) The efficacy of alcohol-based disinfectants is significantly higher when hands are allowed to dry for 1 minute after the washing phase and before the disinfection phase. To clarify the above questions before the establishment of the modified

  13. Effect of preparation conditions on physicochemical, surface and catalytic properties of cobalt ferrite prepared by coprecipitation

    Energy Technology Data Exchange (ETDEWEB)

    El-Shobaky, G.A., E-mail: elshobaky@yahoo.co [Physical Chemistry Department, National Research Center, Dokki, Cairo (Egypt); Turky, A.M.; Mostafa, N.Y.; Mohamed, S.K. [Chemistry Department, Faculty of Science, Suez Canal University, Ismailia 41522 (Egypt)

    2010-03-18

    Cobalt ferrite nanoparticles were prepared via thermal treatment of cobalt-iron mixed hydroxides at 400-600 {sup o}C. The mixed hydroxides were coprecipitated from their nitrates solutions using NaOH as precipitating agent. The effects of pH and temperature of coprecipitation and calcination temperature on the physicochemical, surface and catalytic properties of the prepared ferrites were studied. The prepared systems were characterized using TG, DTG, DTA, chemical analysis, atomic absorption spectroscopy (AAS), X-ray diffraction (XRD), energy dispersive X-ray (EDX) as well as surface and texture properties based on nitrogen adsorption-desorption isotherms. The prepared cobalt ferrites were found to be mesoporous materials that have crystallite size ranges between 8 and 45 nm. The surface and catalytic properties of the produced ferrite phase were strongly dependent on coprecipitation conditions of the mixed hydroxides and on their calcination temperature.

  14. Scholarship in nursing: Degree-prepared nurses versus diploma-prepared nurses

    Directory of Open Access Journals (Sweden)

    Lizeth Roets

    2016-12-01

    Conclusion: The global nursing crisis, nor the nursing profession, will benefit by only training more nurses. The profession and the health care sector need more degree prepared nurses to improve scholarship in nursing.

  15. Preparation of amidated derivatives of carboxymethylcellulose.

    Science.gov (United States)

    Taubner, Tomáš; Synytsya, Andriy; Čopíková, Jana

    2015-01-01

    Carboxymethylcellulose (CMC) was selected as substrate for amidation based on previous results described for monocarboxy cellulose (MCC) with the aim to prepare highly substituted products. In comparison with MCC containing uronic carboxyl groups at C-6 position, O-carboxymethyl groups in CMC should be more accessible for reagents because they are more distant from the polysaccharide chain. Two-step way of amidation was based on the esterification of CMC carboxyls by reaction with methanol and further amino-de-alkoxylation (aminolysis) of the obtained methyl ester with amidation reagents (n-alkylamines, hydrazine and hydroxylamine). Purity and substitution degree of the products were monitored by the vibration spectroscopic methods (FTIR and Raman) and organic elemental analysis. Analytical methods confirmed the preparation of highly or moderately substituted N-alkylamides, hydrazide and hydroxamic acid of CMC.

  16. Preparation and nucleation of spherical metallic droplet

    Directory of Open Access Journals (Sweden)

    Bing-ge Zhao

    2015-03-01

    Full Text Available The preparation and solidification of metallic droplets attract more and more attention for their significance in both engineering and scientific fields. In this paper, the preparation and characterization of Sn-based alloy droplets using different methods such as atomization and consumable electrode direct current arc (CDCA technique are reviewed. The morphology and structure of these droplets were determined by optical microscopy, X-ray diffraction (XRD and scanning electron microscopy (SEM. The solidification behavior of single droplet was systematically studied by means of scanning calorimetry (DSC, and the nucleation kinetics was also calculated. In particular, the development of fast scanning calorimetry (FSC made it possible to investigate the evolution of undercooling under ultrafast but controllable heating and cooling conditions. The combination of CDCA technique and FSC measurements opens up a new door for quantitative studies on droplet solidification, which is accessible to demonstrate some theories by experiments.

  17. A novel method for preparing microplastic fibers

    Science.gov (United States)

    Cole, Matthew

    2016-01-01

    Microscopic plastic (microplastic, 0.1 µm–5 mm) is a widespread pollutant impacting upon aquatic ecosystems across the globe. Environmental sampling has revealed synthetic fibers are prevalent in seawater, sediments and biota. However, microplastic fibers are rarely used in laboratory studies as they are unavailable for purchase and existing preparation techniques have limited application. To facilitate the incorporation of environmentally relevant microplastic fibers into future studies, new methods are required. Here, a novel cryotome protocol has been developed. Nylon, polyethylene terephthalate and polypropylene fibers (10–28 μm diameter) were aligned, embedded in water-soluble freezing agent, and sectioned (40–100 μm length) using a cryogenic microtome. Microplastic fibers were prepared to specified lengths (P microplastics, with widths similar to those observed in the natural environment, which could ultimately lead to a better understanding of the biological and ecological effects of microplastic debris in the environment. PMID:27694820

  18. Data preparation for asteroseismology with TESS

    CERN Document Server

    Lund, Mikkel N; Kjeldsen, Hans; Chaplin, William J; Christensen-Dalsgaard, Jørgen

    2016-01-01

    The Transiting Exoplanet Survey Satellite (TESS) is a NASA Astrophysics Explorer mission. Following its scheduled launch in 2017, TESS will focus on detecting exoplanets around the nearest and brightest stars in the sky, for which detailed follow-up observations are possible. TESS will, as the NASA Kepler mission, include a asteroseismic program that will be organized within the TESS Asteroseismic Science Consortium (TASC), building on the success of the Kepler Asteroseismic Science Consortium (KASC). Within TASC data for asteroseismic analysis will be prepared by the TASC Working Group 0 (WG-0), who will facilitate data to the community via the TESS Asteroseismic Science Operations Center (TASOC), again building on the success of the corresponding KASOC platform for Kepler. Here, we give an overview of the steps being taken within WG-0 to prepare for the upcoming TESS mission.

  19. Preparation, characterization and utilization of starch nanoparticles.

    Science.gov (United States)

    Kim, Hee-Young; Park, Sung Soo; Lim, Seung-Taik

    2015-02-01

    Starch is one of the most abundant biopolymers in nature and is typically isolated from plants in the form of micro-scale granules. Recent studies reported that nano-scale starch particles could be readily prepared from starch granules, which have unique physical properties. Because starch is environmentally friendly, starch nanoparticles are suggested as one of the promising biomaterials for novel utilization in foods, cosmetics, medicines as well as various composites. An overview of the most up-to-date information regarding the starch nanoparticles including the preparation processes and physicochemical characterization will be presented in this review. Additionally, the prospects and outlooks for the industrial utilization of starch nanoparticles will be discussed. Copyright © 2014 Elsevier B.V. All rights reserved.

  20. Macroporous Monolithic Polymers: Preparation and Applications

    Directory of Open Access Journals (Sweden)

    Cecilia Inés Alvarez Igarzabal

    2009-12-01

    Full Text Available In the last years, macroporous monolithic materials have been introduced as a new and useful generation of polymers used in different fields. These polymers may be prepared in a simple way from a homogenous mixture into a mold and contain large interconnected pores or channels allowing for high flow rates at moderate pressures. Due to their porous characteristics, they could be used in different processes, such as stationary phases for different types of chromatography, high-throughput bioreactors and in microfluidic chip applications. This review reports the contributions of several groups working in the preparation of different macroporous monoliths and their modification by immobilization of specific ligands on the products for specific purposes.

  1. Preparation and characterization of porous magnesium materials

    Institute of Scientific and Technical Information of China (English)

    LIU Xi-qin; LIU Zi-li; ZHANG Xiao-hong; FENG Jun-dong; YU Ta-xi

    2006-01-01

    The proper spacer material and the preparation technology for biological compatible porous magnesium materials were explored by the powder metallurgy method, and microstructures, porosity and mechanical properties of sintered porous magnesium were investigated. The results show that compared with spacer materials of NH4CO3, NH3Cl and carbamide, NH4CO3 is the best one for preparation of sintered porous magnesium, and the worst one is NH3Cl. The isolated blind pores are formed mainly by the particle interval of the magnesium powders. Adding spacer material favors the formation of open pores, while has little contribution to the formation of blind pores. The overall porosity and porosity of open pore of the sintered porous magnesium increase with the increase of added spacer material, while decrease with the increase of the molding stress. The mechanical properties of sintered porous magnesium increase with decreasing addition of spacer material and increasing molding stress.

  2. Preparation of edge states by shaking boundaries

    Energy Technology Data Exchange (ETDEWEB)

    Shi, Z.C. [Department of Physics, Fuzhou University, Fuzhou 350002 (China); Center for Quantum Sciences and School of Physics, Northeast Normal University, Changchun 130024 (China); Hou, S.C. [Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang, Sichuan (China); Wang, L.C. [School of Physics and Optoelectronic Technology, Dalian University of Technology, Dalian 116024 (China); Yi, X.X., E-mail: yixx@nenu.edu.cn [Center for Quantum Sciences and School of Physics, Northeast Normal University, Changchun 130024 (China)

    2016-10-15

    Preparing topological states of quantum matter, such as edge states, is one of the most important directions in condensed matter physics. In this work, we present a proposal to prepare edge states in Aubry–André–Harper (AAH) model with open boundaries, which takes advantage of Lyapunov control to design operations. We show that edge states can be obtained with almost arbitrary initial states. A numerical optimalization for the control is performed and the dependence of control process on the system size is discussed. The merit of this proposal is that the shaking exerts only on the boundaries of the model. As a by-product, a topological entangled state is achieved by elaborately designing the shaking scheme.

  3. Preparation of edge states by shaking boundaries

    Science.gov (United States)

    Shi, Z. C.; Hou, S. C.; Wang, L. C.; Yi, X. X.

    2016-10-01

    Preparing topological states of quantum matter, such as edge states, is one of the most important directions in condensed matter physics. In this work, we present a proposal to prepare edge states in Aubry-André-Harper (AAH) model with open boundaries, which takes advantage of Lyapunov control to design operations. We show that edge states can be obtained with almost arbitrary initial states. A numerical optimalization for the control is performed and the dependence of control process on the system size is discussed. The merit of this proposal is that the shaking exerts only on the boundaries of the model. As a by-product, a topological entangled state is achieved by elaborately designing the shaking scheme.

  4. Preparing for events for physically challenged athletes.

    Science.gov (United States)

    Simon, Lauren M; Ward, David C

    2014-01-01

    The participation in sports for physically challenged athletes continues to expand in multiple domains from recreational, novice, and competitive to elite competitions such as the Paralympics. Physically challenged athletes have various disabilities such as visual impairments, spinal cord injuries, amputations, cerebral palsy, or other neuromuscular impairments and have different levels of functional ability within these broad categories. The spectrum of medical illnesses and musculoskeletal injuries seen with sports is similar to that of able-bodied athletes; however medical teams caring for athletes with disabilities need to be familiar with medical risks such as skin breakdown, thermoregulation problems, dehydration, autonomic dysreflexia, infections, orthotic and prosthetic issues, and psychiatric comorbidities that may be encountered. The medical team preparation for events involving physically challenged athletes should include obtaining appropriate medical supplies, ensuring disability-compatible access to medical areas, and preparing for emergency extraction from adaptive equipment.

  5. Preparation and Charcterization of Konjac Superabsorbent Polymer

    Institute of Scientific and Technical Information of China (English)

    JIANG Fatang; LI Wanfen; ZHAN Xiaohui; CHEN Guofeng; ZHOU Jun; HUANG Jing; ZHANG Shenghua

    2006-01-01

    A superabsorbent polymer was prepared by grafting sodium acrylate (SA) onto Konjac flour using potassium persulfate (KPS) and N, N'-methylene bis acrylamide (MBA) as an initiator and crosslinker , respectively. The effect of various preparation conditions on its water absorbency was investigated. When the Konjac Flour content was 3.0 g , the acrylic acid ( AA ) content was 30.0 g, the amount of initiator was 0.150 g, the neutralization degree of monomer was 85% , the reaction temperature was 60 ℃ and the amount of crosslinker was 0.025 g, the polymer's absorbency was 750 times in pure water and 279 times in tap water at ambient temperature. It had also high water retention. The graft efficiency reached 67%. The analyses of FT-IR and SEM indicate that sodium acrylate is grafted on the polysaccharides of Konjac flour.

  6. Preparation of coal slurry with organic solvents.

    Science.gov (United States)

    Shin, Yu-Jen; Shen, Yun-Hwei

    2007-06-01

    In this study, various organic solvents were used to prepare coal slurries and the rheological and thermal properties of coal-organic solvent slurries were examined. Solvents with molecules containing unpaired electrons (high basicity) show high extraction power and cause swelling of coal. Therefore, coal-organic solvent slurries usually showed higher viscosities compared to coal-water slurry. In addition, coal slurries prepared by alcohols and cyclohexanone demonstrated lower settling rates but a high specific sedimentation volume presumably because these solvents swelled coal particles well and led to the formation of weak gel structures in the bulk. In addition, ethanol and cyclohexanone are capable of breaking a considerable amount of hydrogen bonds in coal and subsequently opening up the structures. Thus, more surface area is available for combustion and the combustion rate of coal slurries was increased.

  7. Orodispersible tablets of Lamotrigine: preparation and evaluation

    Directory of Open Access Journals (Sweden)

    Anand Patel

    2014-08-01

    Full Text Available The aim of the present research was to prepare orodispersible tablets of Lamotrigine for applications in epilepsy and convulsion related problems. Fast action onset is highly desirable in the control of this type of disease condition. All tablets were prepared by solid dispersion method using mannitol and synthetic superdisintegrants like Explotab, Cross Povidone and Micro Crystalline Cellulose. The different powder blends were evaluated for pre-formulation parameters. Effect of superdisintegrants on wetting, disintegration and dissolution parameters was studied. The tablets were evaluated for various parameters like wetting time, hardness, friability, drug content, disintegration and in vitro dissolution. Tablets with Explotab have shown good disintegrating features, also the dispersion not showing any bitter taste; indicate the capability of Vanilla used, as taste masking agents. Almost more than 99% of drug was released from the formulation(F4 within 27 min. Tablets have shown no appreciable changes with respect to physical appearance, drug content, disintegration time, and dissolution profiles.

  8. Preparation of Hydrochlorothiazide Nanoparticles for Solubility Enhancement

    Directory of Open Access Journals (Sweden)

    Eliska Vaculikova

    2016-08-01

    Full Text Available Nanoparticles can be considered as a useful tool for improving properties of poorly soluble active ingredients. Hydrochlorothiazide (Class IV of the Biopharmaceutical Classification System was chosen as a model compound. Antisolvent precipitation-solvent evaporation and emulsion solvent evaporation methods were used for preparation of 18 samples containing hydrochlorothiazide nanoparticles. Water solutions of surfactants sodium dodecyl sulfate, Tween 80 and carboxymethyl dextran were used in mass concentrations of 1%, 3% and 5%. Acetone and dichloromethane were used as solvents of the model compound. The particle size of the prepared samples was measured by dynamic light scattering. The selected sample of hydrochlorothiazide nanoparticles stabilized with carboxymethyl dextran sodium salt with particle size 2.6 nm was characterized additionally by Fourier transform mid-infrared spectroscopy and scanning electron microscopy. It was found that the solubility of this sample was 6.5-fold higher than that of bulk hydrochlorothiazide.

  9. Controlling air toxics through advanced coal preparation

    Energy Technology Data Exchange (ETDEWEB)

    Straszheim, W.E.; Buttermore, W.H.; Pollard, J.L. [Iowa State Univ., Ames, IA (United States)

    1995-11-01

    This project involves the assessment of advanced coal preparation methods for removing trace elements from coal to reduce the potential for air toxic emissions upon combustion. Scanning electron microscopy-based automated image analysis (SEM-AIA) and advanced washability analyses are being applied with state-of-the-art analytical procedures to predict the removal of elements of concern by advanced column flotation and to confirm the effectiveness of preparation on the quality of quantity of clean coal produced. Specific objectives are to maintain an acceptable recovery of combustible product, while improving the rejection of mineral-associated trace elements. Current work has focused on determining conditions for controlling column flotation system across its operating range and on selection and analysis of samples for determining trace element cleanability.

  10. Preparation a Child for Surgery and Hospitalization

    Directory of Open Access Journals (Sweden)

    Rahim Vakili

    2015-05-01

    Full Text Available Hospitalization and medical experiences can be confusing and stressful for children, teens and their families. It is very common for young people and their families to have many questions when they are scheduled for surgery or hospitalization. When children are given opportunities to cope successfully with medical experiences, they may see themselves as more capable, more in control, and more reassured. This success often leads to a more positive sense of self, as well as a healthier regard for medical procedures in general. Also, previous medical experiences can affect how the child will react to hospitalization. It is important to maintain a normal routine and activities, such as playing and schooling. Family and friend’s child should be encouraged to visit the child patient. The best way to prepare the child for hospitalization is to prepare ourselves by understanding what will occur.

  11. A novel method for preparing microplastic fibers

    Science.gov (United States)

    Cole, Matthew

    2016-10-01

    Microscopic plastic (microplastic, 0.1 µm–5 mm) is a widespread pollutant impacting upon aquatic ecosystems across the globe. Environmental sampling has revealed synthetic fibers are prevalent in seawater, sediments and biota. However, microplastic fibers are rarely used in laboratory studies as they are unavailable for purchase and existing preparation techniques have limited application. To facilitate the incorporation of environmentally relevant microplastic fibers into future studies, new methods are required. Here, a novel cryotome protocol has been developed. Nylon, polyethylene terephthalate and polypropylene fibers (10–28 μm diameter) were aligned, embedded in water-soluble freezing agent, and sectioned (40–100 μm length) using a cryogenic microtome. Microplastic fibers were prepared to specified lengths (P microplastics, with widths similar to those observed in the natural environment, which could ultimately lead to a better understanding of the biological and ecological effects of microplastic debris in the environment.

  12. Preparing Teachers for Anti-oppressive Education

    DEFF Research Database (Denmark)

    Baber, Sikunder Ali

    2004-01-01

    While theories and recommendations continue to proliferate in the educational research literature on what it means to teach towards social justice and to prepare teachers for such teaching, so do concerns that these theories and recommendations fail to account for the ways that the contexts...... of teaching cultural contexts, national contexts, political contexts always affect teaching in idiosyncratic, unpredictable and even contradictory ways. Given that much educational research fails to trouble the US-centric nature of prevailing conceptions of social justice and teacher education......, it is important to learn about the unique as well as shared challenges facing teacher educators around the globe. In this article, teacher educators from Asia, Africa, North America and South America offer a sampling of initiatives in anti-oppressive teacher education; that is, initiatives to prepare teachers...

  13. IT disaster recovery: are you prepared?

    Science.gov (United States)

    Donley, Elizabeth

    2007-10-01

    New Web technologies provide new opportunities but also include new risks. In an article in the May 2003 edition of Harvard Business Review, Editor Nicolas G. Carr said, "executives need to shift their attention from IT opportunities to IT risks-from offense to defense." That's probably a bit extreme. A better approach is to look at IT the same way you look at any business proposition. Every decision should be an informed decision. You should weigh the opportunities against the risks in order to select the best option. Then, once you have made your decision, take the necessary steps to minimize and prepare for the risks. This includes preparing for whatever disaster may come your way.

  14. Mechanical bowel preparation for elective colorectal surgery

    DEFF Research Database (Denmark)

    Guenaga, Katia K F G; Matos, Delcio; Wille-Jørgensen, Peer

    2009-01-01

    BACKGROUND: The presence of bowel contents during surgery has been related to anastomotic leakage, but the belief that mechanical bowel preparation (MBP) is an efficient agent against leakage and infectious complications is based on observational data and expert opinions only. OBJECTIVES: To dete......BACKGROUND: The presence of bowel contents during surgery has been related to anastomotic leakage, but the belief that mechanical bowel preparation (MBP) is an efficient agent against leakage and infectious complications is based on observational data and expert opinions only. OBJECTIVES...... with no MBP. Primary outcomes included anastomosis leakage - both rectal and colonic - and combined figures. Secondary outcomes included mortality, peritonitis, reoperation, wound infection, extra-abdominal complications, and overall surgical site infections. DATA COLLECTION AND ANALYSIS: Data were...

  15. Remote State Preparation of Mental Information

    CERN Document Server

    Tressoldi, Patrizio E

    2012-01-01

    The aim of this paper is to define in theoretical terms and summarise the available experimental evidence that physical and mental "objects", if considered "information units", may present similar classical and quantum models of communication beyond their specific characteristics. Starting with the Remote State Preparation protocol, a variant of the Teleportation protocol, for which formal models and experimental evidence are already available in quantum mechanics, we outline a formal model applied to mental information we defined Remote State Preparation of Mental Information (RSPMI), and we summarise the experimental evidence supporting the feasibility of a RSPMI protocol. The available experimental evidence offers strong support to the possibility of real communication at distance of mental information promoting the integration between disciplines that have as their object of knowledge different aspects of reality, both physical and the mental, leading to a significant paradigm shift in cognitive and infor...

  16. Galactose oxidase nanoaggregates: Preparation and characterization

    OpenAIRE

    Mamta Sharma; Minakshi Sharma

    2016-01-01

    Galctose oxidase nanoaggregates have been prepared by chemical desolvation method involving the crosslinkng agent glutaraldehyde. These enzyme nanoagregates have been characterized by transmission electron microscopy(TEM), UV visible spectroscopy, Fourier transform infrared spectroscopy (FTIR). TEM reveals the globular spherical nanostructured form upto the range of 20nm. UV visible spectroscopy of galactose oxidase nanoaggregates shows maximum absorption peak at 237nm. FTIR spectra obtaine...

  17. Preparation and characterization of aluminum stearate

    Directory of Open Access Journals (Sweden)

    Lončar Eva S.

    2003-01-01

    Full Text Available Preparation of aluminum stearate by the precipitation method was examined under various conditions of stearic acid saponification with sodium hydroxide. It was proved that the most favorable ratio of acid/alkali was 1:1.5 and that the obtained soap was very similar to the commercial product. Endothermic effects determined by differential scanning calorimetry and also the other parameters showed that the soaps consisted mono-, di-, tristearates and non-reacted substances, where distearate was the dominant form.

  18. Mechanical bowel preparation for elective colorectal surgery

    DEFF Research Database (Denmark)

    Güenaga, Katia F; Matos, Delcio; Wille-Jørgensen, Peer

    2011-01-01

    The presence of bowel contents during colorectal surgery has been related to anastomotic leakage, but the belief that mechanical bowel preparation (MBP) is an efficient agent against leakage and infectious complications is based on observational data and expert opinions only.An enema before...... the rectal surgery to clean the rectum and facilitate the manipulation for the mechanical anastomosis is used for many surgeons. This is analysed separately...

  19. Preparation of Rodent Testis Co-Cultures

    OpenAIRE

    Wegner, Susanna; Hong, Sungwoo; Yu, Xiaozhong; Faustman, Elaine M.

    2013-01-01

    Male reproductive development is a complex process that is sensitive to disruption by a range of toxicants. There is a great need for in vitro models that can evaluate potential male reproductive toxicants. The current unit presents a protocol for preparation of a three-dimensional in vitro model of male reproductive development that reduces the number of animals required for evaluation of toxicants. A Matrigel overlay provides a three-dimensional extracellular matrix that improves cell attac...

  20. Preparation of 2-deoxyaldoses from aldose phenylhydrazones

    DEFF Research Database (Denmark)

    Jørgensen, Christel Thea; Pedersen, Christian

    1997-01-01

    Acetylation of D-mannose phenylhydrazone gives acetylated D-arabino-1-phenyl-azo-1-(E)-hexene. Subsequent reduction with sodium borohydride produces 2-deoxy-D-arabino-hexose phenylhydrazone which, on hydrolysis, gives 2-deoxy-D-arabino-hexose. By a similar procedure 2-deoxy-D-lyxo-hexose, 2,6-did......,6-dideoxy-L-arabino-hexose, and 2-deoxy-D-erythropentose can be prepared from D-galactose, L-rhamnose, and D-arabinose, respectively....

  1. The Galatia preparation plant expands throughput

    Energy Technology Data Exchange (ETDEWEB)

    Reed, S.R.; Campbell, J.A.L.; Riffey, R.L. [Kerr-McGee Coal, Oklahoma City, OK (United States)

    1995-04-01

    Profiles the Kerr-McGee`s Galatia coal preparation plant, located on the Galatia Mine complex near Marian (Illinois). The plant, first opened in 1984, originally consisted of a coarse heavy-media vessel circuit, dual heavy-media cyclone circuits, and split fine-coal flotation. In 1994 the plant was expanded adding new technology whilst retaining the original design concepts. New technology installed included new spirals and fiberglass replacement components to overcome corrosion. 3 figs.

  2. Preparation of double-walled carbon nanotubes

    Institute of Scientific and Technical Information of China (English)

    JIANG Bin; WEI Jinquan; CI Lijie; WU Dehai

    2004-01-01

    Double-walled carbon nanotubes were prepared using the floating chemical vapor deposition with methane as carbon source and adding small amount of sulfur into the ferrocene catalyst. The optimized technological parameters are: the reaction temperature is 1200℃; the catalyst vapor temperature is 80℃; the flow rate of argon is 2000 SCCM; the flow rate of methane is 5 SCCM. The purified DWNTs under these optimized technological parameters have high purity above 90 wt%.

  3. Preparing to perform: periodization and dance.

    Science.gov (United States)

    Wyon, Matthew

    2010-01-01

    This article reviews the historical and current literature on periodization in sport before applying the concept to dance from scientific and anecdotal points of view. Preparing the dancer through the use of a periodization model, in a professional or vocational setting, will potentially help prevent overtraining and its link to injury, while improving the dancer's readiness to perform optimally. Practical examples of tapering and periodization of training are discussed for companies and vocational schools.

  4. Preparation of iron oxides and oxihydroxides

    Directory of Open Access Journals (Sweden)

    Iveta Štyriaková

    2006-12-01

    Full Text Available Iron oxides are common minerals that occur in the environment, either naturally or as a result of human activities.The most common Fe(III-hydroxides and -oxides include ferrihydrite (Fe5HO8 .4H2O that transforms to hematite (a-Fe2O3 and/or goethite (a-FeOOH.That depends on the solution composition, temperature and pH. Depending on the composition of the solid and solution, oxidation can transform the green rust (a product formed by a metal corrosion to lepidocrocite (γ -FeOOH or magnetite (Fe(IIFe(III 2O4 . Weathering can degrade magnetite to maghemite (γ –Fe2O3 and all of the Fe-oxides are subject to an attack and dissolution by organic acids and ligands that are formed during the breakdown of biological material. Iron oxides can be prepared by hydrolysis of acidic Fe3+ solutions or by controlled oxidation of Fe2+ solutions. Goethite, lepidocrocite and magnetite were prepared by oxidation of Fe2+ solutions under slightly different values of pH, Fe concentrations and rates of oxidation. Maghemite was prepared by a thermal transformation from synthetic lepidocrocite heated in a furnace at 250 °C for 2h. Hematite was prepared by forced hydrolysis of Fe3+ solution from a chlorine system (FeCl3 at the temperature close to 100 °C under strongly acidic conditions (pH 1-2. Main mineral phases were confirmed by the RTG diffraction and IR spectroscopy method. Iron oxides are excellent, renewable adsorbents, and often control free metals through adsorption reaction.

  5. A Primer on Wound Bed Preparation

    OpenAIRE

    Gokoo, Chuck

    2009-01-01

    Successful wound closure and healing are a major concern for today's clinician. Determining if the wound will progress or not relies on a comprehensive assessment, recognition of wound characteristics that will promote or impede the healing process and preparing the wound bed such that pathological features are removed allowing the healing cascade to occur. When complications are no longer a roadblock the wound will achieve a stable microenvironment and progress through the normal repairative...

  6. Remote State Preparation of Mental Information

    OpenAIRE

    Tressoldi, Patrizio E.; Khrennikov, Andrei

    2012-01-01

    The aim of this paper is to define in theoretical terms and summarise the available experimental evidence that physical and mental "objects", if considered "information units", may present similar classical and quantum models of communication beyond their specific characteristics. Starting with the Remote State Preparation protocol, a variant of the Teleportation protocol, for which formal models and experimental evidence are already available in quantum mechanics, we outline a formal model a...

  7. Sample preparation for SEM of plant surfaces

    OpenAIRE

    A.K. Pathan; Bond, J.; R.E. Gaskin

    2010-01-01

    Plant tissues must be dehydrated for observation in most electron microscopes. Although a number of sample processing techniques have been developed for preserving plant tissues in their original form and structure, none of them are guaranteed artefact-free. The current paper reviews common scanning electron microscopy techniques and the sample preparation methods employed for visualisation of leaves under specific types of electron microscopes. Common artefacts introduced by specific techniq...

  8. Anticipating Serendipity. Preparing for the Unexpected.

    Directory of Open Access Journals (Sweden)

    Marlowe Thomas J.

    2014-08-01

    Full Text Available Serendipity—using "fortunate accidents" for learning or discovery—is a valued if too infrequent route to progress. Although serendipity cannot be scheduled or relied upon, one can develop skills, flexibility and habits of mind that make the recognition and incorporation of serendipitous discoveries more likely. This paper overviews at a high level a program of activities and concepts aimed at preparing modern professionals and communities to leverage the fortunate occurrences they encounter.

  9. Purity of targets prepared on Cu substrates

    Science.gov (United States)

    Méens, A.; Rossini, I.; Sens, J. C.

    1993-09-01

    The purity of several elemental self-supporting targets usually prepared by evaporation onto soluble Cu substrates has been studied. The targets were analysed by Rutherford backscattering and instrumental neutron activation analysis. Because of the high percentage of Cu observed in some Si targets, further measurements, including transmission electron microscopy, have been performed on Si targets deposited by e-gun bombardment onto Cu and ion-beam sputtering onto betaine.

  10. Oedipus king: preparing man for the polis

    OpenAIRE

    José Joaquim Pereira Melo; Renan Willian Fernandes Gomes

    2013-01-01

    Having Sophoclean play Oedipus King as a frame of reference, the purpose of this paper is to discuss the educative proposal conceived to the Greek Man as preparation for life in the polis. Although not intentionally, Sophocles pointed out an ideal of Man which, in his perspective, would fulfill Greek societal demands of that time. Such society was divided between myth and rationality and, as a result, Man found Himself in conflict and lacking direction for His life. Given that, Oedipus’ chara...

  11. Grasping preparation enhances orientation change detection.

    Directory of Open Access Journals (Sweden)

    Tjerk P Gutteling

    Full Text Available Preparing a goal directed movement often requires detailed analysis of our environment. When picking up an object, its orientation, size and relative distance are relevant parameters when preparing a successful grasp. It would therefore be beneficial if the motor system is able to influence early perception such that information processing needs for action control are met at the earliest possible stage. However, only a few studies reported (indirect evidence for action-induced visual perception improvements. We therefore aimed to provide direct evidence for a feature-specific perceptual modulation during the planning phase of a grasping action. Human subjects were instructed to either grasp or point to a bar while simultaneously performing an orientation discrimination task. The bar could slightly change its orientation during grasping preparation. By analyzing discrimination response probabilities, we found increased perceptual sensitivity to orientation changes when subjects were instructed to grasp the bar, rather than point to it. As a control experiment, the same experiment was repeated using bar luminance changes, a feature that is not relevant for either grasping or pointing. Here, no differences in visual sensitivity between grasping and pointing were found. The present results constitute first direct evidence for increased perceptual sensitivity to a visual feature that is relevant for a certain skeletomotor act during the movement preparation phase. We speculate that such action-induced perception improvements are controlled by neuronal feedback mechanisms from cortical motor planning areas to early visual cortex, similar to what was recently established for spatial perception improvements shortly before eye movements.

  12. Sample preparation method for scanning force microscopy

    CERN Document Server

    Jankov, I R; Szente, R N; Carreno, M N P; Swart, J W; Landers, R

    2001-01-01

    We present a method of sample preparation for studies of ion implantation on metal surfaces. The method, employing a mechanical mask, is specially adapted for samples analysed by Scanning Force Microscopy. It was successfully tested on polycrystalline copper substrates implanted with phosphorus ions at an acceleration voltage of 39 keV. The changes of the electrical properties of the surface were measured by Kelvin Probe Force Microscopy and the surface composition was analysed by Auger Electron Spectroscopy.

  13. Materials, preparation, and characterization in thermoelectrics

    CERN Document Server

    Rowe, David Michael

    2012-01-01

    This book includes updated theoretical considerations which provide an insight into avenues of research most likely to result in further improvements in material performance. It details the latest techniques for the preparation of thermoelectric materials employed in energy harvesting, together with advances in the thermoelectric characterisation of nanoscale material. The book reviews the use of neutron beams to investigate phonons, whose behaviour govern the lattice thermal conductivity and includes a chapter on patents.

  14. Projector slides - preparation, construction and use.

    Science.gov (United States)

    Galer, I A

    1976-12-01

    Projector slides are used widely as visual aids in lectures and meetings. However, they are often difficult to read and to interpret, and can bring about more confusion than illumination to an audience. A framework is offered for the non-specialist in graphic design, within which the preparation, construction and presentation of projector slides may be placed in a systematic fashion. Summary recommendations are also given.

  15. PREPARATION OF SPHERICAL URANIUM DIOXIDE PARTICLES

    Science.gov (United States)

    Levey, R.P. Jr.; Smith, A.E.

    1963-04-30

    This patent relates to the preparation of high-density, spherical UO/sub 2/ particles 80 to 150 microns in diameter. Sinterable UO/sub 2/ powder is wetted with 3 to 5 weight per cent water and tumbled for at least 48 hours. The resulting spherical particles are then sintered. The sintered particles are useful in dispersion-type fuel elements for nuclear reactors. (AEC)

  16. Preparation of the Superconductor Substrate: Strontium Titanate

    Science.gov (United States)

    1988-09-01

    single crystals of strontium titanate is derived from the original method developed by Verneuil . 16 The general procedure for the growth of single... crystals growth are reported. The growth direction was determined to be 5 degrees away from the [2111 direction. ICP-emission spectroscopy irdicates... Growth of Strontium Titanate Crystals 5 2.4 Preparation of Substrates 8 3. RESULTS AND CONCLUSIONS 8 REFERENCES 13 Illustrations 1. Schematic Diagram

  17. Mechanical bowel preparation for elective colorectal surgery

    DEFF Research Database (Denmark)

    Güenaga, Katia F; Matos, Delcio; Wille-Jørgensen, Peer

    2011-01-01

    The presence of bowel contents during colorectal surgery has been related to anastomotic leakage, but the belief that mechanical bowel preparation (MBP) is an efficient agent against leakage and infectious complications is based on observational data and expert opinions only.An enema before the r...... the rectal surgery to clean the rectum and facilitate the manipulation for the mechanical anastomosis is used for many surgeons. This is analysed separately...

  18. PREPARATION AND CHARACTERIZATION OF BAMBOO NANOCRYSTALLINE CELLULOSE

    Directory of Open Access Journals (Sweden)

    Mengjiao Yu,

    2012-02-01

    Full Text Available Nanocrystalline cellulose (NCC has many potential applications because of its special properties. In this paper, NCC was prepared from bamboo pulp. Bamboo pulp was first pretreated with sodium hydroxide, followed by hydrolysis with sulfuric acid. The concentration of sulfuric acid and the hydrolysis time on the yield of NCC were studied. The results showed that sulfuric acid concentration had larger influence than the hydrolysis time on the yield of NCC. When the temperature was 50oC, the concentration of sulfuric acid was 48wt% and the reaction time was 30 minutes, a high quality of nanocrystalline cellulose was obtained; under these conditions, the length of the nanocrystalline cellulose ranged from 200 nm to 500 nm, the diameter was less than 20 nm, the yield was 15.67wt%, and the crystallinity was 71.98%, which is not only higher than those of cellulose nanocrystals prepared from some non-wood materials, but also higher than bamboo cellulose nanocrystals prepared by other methods.

  19. PREPARATION AND PHYSICOCHEMICAL ANALYSIS OF HINGULIYA MANIKYARASA

    Directory of Open Access Journals (Sweden)

    Inamdar Mahesh Prabhakar

    2013-12-01

    Full Text Available Rasashastra deals with the preparation of medicines mainly with the help of Mercury, minerals, metals and other herbs. It is our prime duty to develop basic standards at every step of drug preparation. The aim of the present research work was to study pharmaceutical and analytical aspect of Hinguliya Manikyarasa. For Pharmaceutical study the method used was the observations regarding time, temperature, cardinal stages, finished product and consumption of fuel. Temperature range for Hinguliya Manikyarasa was also studied. For Physicochemical study Crystallographic study, NPS test along with Chemical analysis of the same drug was done. The Result obtained as Hinguliya Manikyarasa requires 94 hours for preparation and the average temperature recorded for Mrudu Agni was 132.230C, for Madhyamagni was 303.660C and that for Tivra Agni was 499.830C. All the parameters like Time, Temperature and the amount of fuel used as parameters for standardization of Hinguliya Manikyarasa. The Nambury Phased Spot Test was used to identify and establish spot standards for the samples of Hinguliya Manikyarasa. The crystallographic study suggests that the compound Hinguliya Manikyarasa is a mixture of Sulphur, Arsenic Sulphide and Mercuric Sulphide. Another observation was As2S3 was found converted to AsS irreversibly.

  20. Preparation of composite electroheat carbon film

    Institute of Scientific and Technical Information of China (English)

    XIA Jin-tong; TU Chuan-jun; LI Yan; HU Li-min; DENG Jiu-hua

    2005-01-01

    A kind of conductive and heating unit, which can reach a high surface electroheat temperature at a low voltage, was developed in view of the traditional electroheat coating which has a low surface electroheat temperature and an insufficient heat resistance of its binder. The coating molded electroheat carbon film(CMECF) was prepared by carbonizing the coating which was prepared by adding modified resin into flake graphite and carbon fiber, coating molded onto the surface of the heat resisting matrix after dried, while the hot pressing molded electroheat thick carbon film(HPMETCF) was prepared by carbonizing the bodies whose powders were hot pressing molded directly.The surface and inner microstructure of the carbon film was characterized and analyzed by SEM and DSC/TG, while electroheat property was tested by voltage-current volume resistivity tester and electrical parameter tester. The results show that, close-packed carbon network configuration is formed within the composite electroheat carbon film film after anti-oxidizable treatment reaches a higher surface electroheat temperature than that of the existing electroheat coatings at a low voltage, and has excellent electroheat property, high thermal efficiency as well as stable physicochemical property. It is found that, at room temperature(19± 2 ℃) and 22 V for 5 min, the surface electroheat temperature of the self-produced CMECF (mfiller/mresin = 1. 8/1) reaches 112 ℃ while HPMETCF (mfiller/mresin = 3. 6/1) reaches 265 ℃.

  1. Improving educational preparation for transcultural health care.

    Science.gov (United States)

    Le Var, R M

    1998-10-01

    There is increasing evidence that the health care needs of people from black and ethnic minority groups in England are not being met. A growing number of initiatives are being undertaken to remedy the situation. Many of them are focused on health care delivery at local and national levels. However, unless the preparation of health care professionals in the area of multi-cultural health care is appropriate and effective, a great deal of corrective action will continue to have to be taken. Despite 1997 having been the European Year Against Racism, it is still necessary to consider what educational preparation should be like. The article draws on identified inadequacies in health care provision as well as examples of initiatives taken to improve care provision. The author identifies deficiencies in educational preparation and proposes a range of actions to be taken. The article is focused on nursing, midwifery and health visiting education in England, but is deemed to be relevant to all health care professionals not only in Europe but other continents, as they become increasingly international and multi-ethnic.

  2. Facile preparation of super durable superhydrophobic materials.

    Science.gov (United States)

    Wu, Lei; Zhang, Junping; Li, Bucheng; Fan, Ling; Li, Lingxiao; Wang, Aiqin

    2014-10-15

    The low stability, complicated and expensive fabrication procedures seriously hinder practical applications of superhydrophobic materials. Here we report an extremely simple method for preparing super durable superhydrophobic materials, e.g., textiles and sponges, by dip coating in fluoropolymers (FPs). The morphology, surface chemical composition, mechanical, chemical and environmental stabilities of the superhydrophobic textiles were investigated. The results show how simple the preparation of super durable superhydrophobic textiles can be! The superhydrophobic textiles outperform their natural counterparts and most of the state-of-the-art synthetic superhydrophobic materials in stability. The intensive mechanical abrasion, long time immersion in various liquids and repeated washing have no obvious influence on the superhydrophobicity. Water drops are spherical in shape on the samples and could easily roll off after these harsh stability tests. In addition, this simple dip coating approach is applicable to various synthetic and natural textiles and can be easily scaled up. Furthermore, the results prove that a two-tier roughness is helpful but not essential with regard to the creation of super durable superhydrophobic textiles. The combination of microscale roughness of textiles and materials with very low surface tension is enough to form super durable superhydrophobic textiles. According to the same procedure, superhydrophobic polyurethane sponges can be prepared, which show high oil absorbency, oil/water separation efficiency and stability. Copyright © 2014 Elsevier Inc. All rights reserved.

  3. Nanostructured antireflective bilayers: Optical design and preparation

    Energy Technology Data Exchange (ETDEWEB)

    Detrich, Ádám [Budapest University of Technology and Economics, Department of Physical Chemistry and Materials Science, Centre for Colloid Chemistry, H-1521 Budapest (Hungary); Nagy, Norbert [Research Centre for Natural Sciences (MTA TTK), Institute for Technical Physics and Materials Science (MFA), P.O. Box 49, H-1525 Budapest (Hungary); Nyári, Mária; Albert, Emőke; Zámbó, Dániel [Budapest University of Technology and Economics, Department of Physical Chemistry and Materials Science, Centre for Colloid Chemistry, H-1521 Budapest (Hungary); Hórvölgyi, Zoltán, E-mail: zhorvolgyi@mail.bme.hu [Budapest University of Technology and Economics, Department of Physical Chemistry and Materials Science, Centre for Colloid Chemistry, H-1521 Budapest (Hungary)

    2014-05-01

    We show different methods for tailoring and fabrication of various cost-effective antireflective nanocoatings on transparent and non-transparent substrates. The main purpose was to prepare coatings with decreased reflectance in the full visible wavelength range using simple wet layer deposition techniques. Structure of coatings was designed by optical simulations applying simplified calculations. The refractive index of substrates was also considered for the calculations. The advantageous optical properties were achieved by bilayered structures combining compact and porous sol–gel derived oxide layers and nanoparticulate films. The bilayered structures enhance the flexibility of design by not only the selection of the layer thicknesses but also by different ways of adjusting the effective refractive index of the layers. Furthermore, chemical stability of the coatings was also investigated. The optical and structural properties of prepared films and bilayered coatings were studied by UV–vis spectroscopy and scanning electron microscopy, respectively. The transmittance of coated glass substrates was above 97.5%, while the reflectance of coated silicon substrates was below 4% between 450 nm and 900 nm. - Highlights: • Designed antireflective bilayered coatings on glass and silicon. • Simple, colloid chemical approaches to preparation. • Favorable optical properties by combining compact and porous oxide layers. • Different ways for adjusting the effective refractive index. • Strong chemical resistance against acidic effects.

  4. Preparing to perform an awake fiberoptic intubation.

    LENUS (Irish Health Repository)

    Walsh, M E

    2012-02-03

    Fiberoptically guided tracheal intubation represents one of the most important advances in airway management to occur in the past thirty years. Perhaps its most important role is in management of the anticipated difficult airway. This is a situation in which the dangers of encountering the life-threatening "can\\'t intubate, can\\'t ventilate" situation can be avoided by placement of an endotracheal tube while the patient is awake. Although skill at the procedure of endoscopy is obviously necessary in this setting, these authors hold that success or failure of the technique frequently depends on the adequacy of preparation. These measures include 1) pre-operative assessment of the patient; 2) careful explanation of what lies in store; 3) "setting the stage"; 4) preparing the equipment to be used; and 5) preparing the patient (antisialogue, sedation, application of topical anesthesia to the upper airway). If these preparatory measures are carried out meticulously, the likelihood of performing a successful and comfortable awake fiberoptic tracheal intubation is greatly increased.

  5. Preparation and application of streptavidin magnetic particles

    Institute of Scientific and Technical Information of China (English)

    ZHANG ZhiFeng; ZHU HongLi; TANG YiTong; CUI Ting; GENG TingTing; CHEN Chao; CUI YaLi

    2007-01-01

    Two kinds of streptavidin magnetic particles, namely streptavidin GoldMag particles and streptavidin amino terminal particles were prepared by the methods of physical adsorption and covalent interaction respectively. The streptavidin coated on magnetic particle surface, crucial to many applications, was greatly influenced by the choice of the different buffer. Compared with Dynalbeads(r)M-270 streptavidin, the binding capacity for biotin of different streptavidin magnetic particles was determined by enzyme inhibition method, and the coupling capacity and activity of biotinylated oligonucleotide on their surface were also analyzed. The results indicated that the streptavidin GoldMag particle prepared by physical adsorption was stable in STE (NaCl-Tris-EDTA) buffer that was frequently used in nucleic acid hybridization and detection. The streptavidin amino terminal particles prepared by covalent interaction could be used both in STE buffer and PBS (phosphate buffered saline) buffer. The biotin binding capacity for 1 mg of streptavidin GoldMag particles and streptavidin amino terminal particles was 4950 and 5115 pmol respectively. The capacity of biotinylated oligonucleotide (24 bp) coupled on 1 mg of GoldMag and amino terminal magnetic particles was 2839 and 2978 pmol separately. These data were about 6-7 times higher than those of Dynabeads(r)M-270 streptavidin. The hybridization results with FITC-labeled complementary probe on magnetic particle surface demonstrated that the oligonucleotide coupled on streptavidin magnetic particles had high biological activity.

  6. An edible gintonin preparation from ginseng.

    Science.gov (United States)

    Choi, Sun-Hye; Shin, Tae-Joon; Lee, Byung-Hwan; Hwang, Sung Hee; Kang, Jiyeon; Kim, Hyun-Joong; Park, Chan-Woo; Nah, Seung-Yeol

    2011-11-01

    Ginseng, the root of Panax ginseng, is one of the oldest herbal medicines. It has a variety of physiological and pharmacological effects. Recently, we isolated a subset of glycolipoproteins that we designated gintonin, and demonstrated that it induced transient change in intracellular calcium concentration ([Ca(2+)]i) in cells via G-protein-coupled receptor signaling pathway(s). The previous method for gintonin isolation included multiple steps using methanol, butanol, and other organic solvents. In the present study, we developed a much simple method for the preparation of gintonin from ginseng root using 80% ethanol extraction. The extracted fraction was designated edible gintonin. This method produced a high yield of gintonin (0.20%). The chemical characteristics of gintonin such as molecular weight and the composition of the extract product were almost identical as the gintonin prepared using the previous extraction regimen involving various organic solvents. We also examined the physiological effects of edible gintonin on endogenous Ca(2+)-activated Cl(-) channel activity of Xenopus oocytes. The 50% effective dose was 1.03±0.3 μg/mL. Finally, since gintonin preparation through ethanol extraction is easily reproducible, gintonin could be commercially applied for ginseng-derived functional health food and/or drug following the confirmations of in vitro and in vivo physiological and pharmacological effects of gintonin.

  7. [The bioequivalence of two oral propafenone preparations].

    Science.gov (United States)

    Koytchev, R; Alken, R G; Mayer, O; Böhm, R; Ellrich, A; Waldner-Kölblin, R G

    1995-05-01

    The bioequivalence of two oral racemic propafenone (CAS 54063-53-5) preparations was tested in an open, randomised, crossover trial with administration of single doses of 300 mg on two different occasions with a washout period of 7 days. 24 healthy, male volunteers, all proved to be rapid hydroxylators of debrisoquine, were enrolled in the trial. The concentrations of R(+)-, S(-)-propafenone and 5-hydroxypropafenone (5-OH-propafenone) were measured up to 12 h after administration by means of a sensitive and specific HPLC method that allowed the simultaneous quantification of all three substances in plasma. The results of 23 volunteers were evaluated pharmacokinetically. Main target parameters were AUC0-infinity and Cmax of both enantiomers of propafenone. Secondary target parameters were AUC0-infinity and Cmax of 5-OH-propafenone as well as tmax for R(+)- and S(-)-propafenone. The 90% confidence intervals for AUC0-infinity for R(+)-, S(-)-, and 5-OH-propafenone were 0.85-1.07, 0.83-1.10 and 0.84-1.05, respectively. The confidence intervals for Cmax were 0.81-1.12, 0.82-1.17 and 0.87-1.09 for R-, S-, and 5-OH-propafenone, respectively. The concentration maxima of both enantiomers were registered on average 15 min earlier after administration of the test preparation. This difference is of no clinical relevance. Both preparations are bioequivalent according to the criteria of the Committee for Proprietary Medicinal Products (CPMP).

  8. Preparation of gasification feedstock from leafy biomass.

    Science.gov (United States)

    Shone, C M; Jothi, T J S

    2016-05-01

    Dried leaves are a potential source of energy although these are not commonly used beside to satisfy daily energy demands in rural areas. This paper aims at preparing a leafy biomass feedstock in the form of briquettes which can be directly used for combustion or to extract the combustible gas using a gasifier. Teak (Tectona grandis) and rubber (Hevea brasiliensis) leaves are considered for the present study. A binder-assisted briquetting technique with tapioca starch as binder is adopted. Properties of these leafy biomass briquettes such as moisture content, calorific value, compressive strength, and shatter index are determined. From the study, briquettes with biomass-to-binder ratio of 3:5 are found to be stable. Higher mass percentage of binder is considered for preparation of briquettes due to the fact that leafy biomasses do not adhere well on densification with lower binder content. Ultimate analysis test is conducted to analyze the gasification potential of the briquettes. Results show that the leafy biomass prepared from teak and rubber leaves has calorific values of 17.5 and 17.8 MJ/kg, respectively, which are comparable with those of existing biomass feedstock made of sawdust, rice husk, and rice straw.

  9. Preparation and application of streptavidin magnetic particles

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Two kinds of streptavidin magnetic particles,namely streptavidin GoldMag particles and streptavidin amino terminal particles were prepared by the methods of physical adsorption and covalent interaction respectively.The streptavidin coated on magnetic particle surface,crucial to many applications,was greatly influenced by the choice of the different buffer.Compared with DynalbeadsM-270 streptavidin, the binding capacity for biotin of different streptavidin magnetic particles was determined by enzyme inhibition method,and the coupling capacity and activity of biotinylated oligonucleotide on their sur- face were also analyzed.The results indicated that the streptavidin GoldMag particle prepared by physical adsorption was stable in STE(NaCl-Tris-EDTA)buffer that was frequently used in nucleic acid hybridization and detection.The streptavidin amino terminal particles prepared by covalent interaction could be used both in STE buffer and PBS(phosphate buffered saline)buffer.The biotin binding ca- pacity for 1 mg of streptavidin GoldMag particles and streptavidin amino terminal particles was 4950 and 5115 pmol respectively.The capacity of biotinylated oligonucleotide(24 bp)coupled on 1 mg of GoldMag and amino terminal magnetic particles was 2839 and 2978 pmol separately.These data were about 6-7 times higher than those of DynabeadsM-270 streptavidin.The hybridization results with FITC-labeled complementary probe on magnetic particle surface demonstrated that the oligonucleotide coupled on streptavidin magnetic particles had high biological activity.

  10. Preparation Calcium Oxide From Chicken Eggshells

    Directory of Open Access Journals (Sweden)

    Risfidian Mohadi

    2016-08-01

    Full Text Available The preparation of metal oxide CaO from chicken eggshell has been carried out by decomposition at various temperatures 600, 700, 800, 900, and 1000oC. The metal oxide CaO was characterized using XRD. Furthermore, The optimum temperature for preparation of CaO was determined based on the XRD pattern, then the characterization of CaO was extended using FT-IR spectrophotometer and BET analysis. The results show that the optimum temperature for preparation of CaO from chicken eggshell is 900oC with peak of 2Ө at 32.3o, 37.4o, 53.9o, 64.2o and 67.5o, respectively. The FT-IR spectrums show the unique vibration for Ca-O at 393 cm-1. The BET analysis show that CaO has surface area 68 m2/g with pore volume 1.65 cm3/g and pore size 6.6 nm which can be classified as mesoporous.

  11. Use of antacid preparations with HAART

    Directory of Open Access Journals (Sweden)

    S Vekeria

    2012-11-01

    Full Text Available Background: Concurrent prescription and consumption of antacid and ulcer healing preparations can affect the absorption of some antiretrovirals (ARV due to increases in intra-gastric pH and should therefore be avoided in drugs dependent on gastric pH for absorption. Methods: Questionnaires were given to consecutive consenting patients presenting to outpatient pharmacy who were receiving antiretroviral therapy (ART which consisted of either atazanavir (TAZ, darunavir (DRV or efavirenz (EFV for greater than 1 year. All patients receiving TAZ are routinely advised on the need for caution with co-administration of antacid preparations when they commence the drug. Information was gathered on the awareness of potential interactions between ARVs and antacid/ulcer healing medication and the use of such preparations over the past year. Viral load (VL data was observed for each patient and any VL blips in the preceding year recorded. Results: A total of 215 patients were questioned, of whom 30% were aware of interactions between ART and antacids/ulcer healing medication; 38% of patients receiving TAZ, 30% on DRV and 25% and on EFV were aware of the drug interaction. 62% of individuals receiving TAZ were therefore unaware of the need not to receive antacid preparations with this drug. 30% (n=66 of patients had either been prescribed or bought antacid/ulcer healing medication in the previous year. 16 out of the 215 patients were recorded as having at least one VL blip in the last year; 9 on TAZ, 6 on DRV and 1 on EFV. 7 of these patients had either bought or been prescribed antacids in the previous year. Four of the patients with viral blips on TAZ had taken antacid preparations. Conclusion: The majority of patients are unaware of potential interactions between ARVs and antacids. However, few patients developed a positive viral load during the period studied. Patients receiving TAZ were not more aware of the potential drug interaction than those receiving

  12. Preparing Your Child for Visits to the Doctor

    Science.gov (United States)

    ... Old Preparing Your Child for Visits to the Doctor KidsHealth > For Parents > Preparing Your Child for Visits ... vital to making an informed diagnosis. Choose a Doctor Who Relates Well to Kids Because your doctor ...

  13. Multilingualism and Teacher Preparation for the Universal Basic ...

    African Journals Online (AJOL)

    Multilingualism and Teacher Preparation for the Universal Basic Education ... materials and personnel in the languages and a general apathy in studying the ... A paradigm for language development and teacher preparation was presented.

  14. At Arbitration Hearings, Justice Favors the Well Prepared.

    Science.gov (United States)

    Neal, Richard G.

    1988-01-01

    Arbitration can be a way to settle employee grievances efficiently and fairly. Count on spending five or six hours in preparation for each hour spent with the arbitrator. Presents strategies for meticulous preparation. (MLF)

  15. Islamic Teacher Preparation in Nigeria: Challenges and Prospects ...

    African Journals Online (AJOL)

    Islamic Teacher Preparation in Nigeria: Challenges and Prospects. ... practicability of the objectives of Islamic Teacher Education and suggests systems or models for its ... Keywords: Teacher Preparation; Islamic Teacher; In- Service Training.

  16. PRACTICAL PREPARATION OF RESVERATROL 3-O-β-D-GLUCURONIDE

    OpenAIRE

    Jungong, Christian S.; Novikov, Alexei V.

    2012-01-01

    A practical synthesis of resveratrol 3-O-β-D-glucuronide, suitable for preparation of large quantities, was developed using selective deacetylation of resveratrol triacetate with ammonium acetate. A simplified procedure for large scale preparation of resveratrol is also reported.

  17. PRACTICAL PREPARATION OF RESVERATROL 3-O-β-D-GLUCURONIDE

    OpenAIRE

    Jungong, Christian S.; Novikov, Alexei V.

    2012-01-01

    A practical synthesis of resveratrol 3-O-β-D-glucuronide, suitable for preparation of large quantities, was developed using selective deacetylation of resveratrol triacetate with ammonium acetate. A simplified procedure for large scale preparation of resveratrol is also reported.

  18. Congener Production in Blood Samples During Preparation and Storage

    DEFF Research Database (Denmark)

    Felby, Søren; Nielsen, Erik

    1995-01-01

    Retsmedicin, congener production, preparation, head space GC, acetone, isobutanol, storage, blood samples, n-propanol, methanol, methylethylketone......Retsmedicin, congener production, preparation, head space GC, acetone, isobutanol, storage, blood samples, n-propanol, methanol, methylethylketone...

  19. PREPARATION AND NUCLEOPHILIC SUBSTITUTION OF THE 2,4 ...

    African Journals Online (AJOL)

    Mgina

    ABSTRACT. Three methods for preparation of D-amino acids by nucleophilic substitution on derivatives of ... In recent years, the preparation of non- ... 1998). DME and THF were distilled under ... methanol/dichloromethane) to yield a white.

  20. A Sequential Preparation of Organic Compounds for Senior Chemistry Classes

    Science.gov (United States)

    Merrigan, Cecilia; Crotty, Patricia

    1971-01-01

    Describes procedures suitable for student preparation of benzaldehyde, benzoic acid, and ethyl benzoate sequentially from benzyl alcohol. Preparation for benzyl chloride also given. All reagents except benzyl alcohol are common inorganic chemicals. (AL)

  1. Orion Ammonia Boiler System Preflight Test Preparations

    Science.gov (United States)

    Levitt, Julia L.

    2017-01-01

    The Environmental Controls and Life Support Systems (ECLSS) branch at Kennedy Space Center (KSC) is currently undergoing preparations for ground testing of the Orion Multi-Purpose Crew Vehicle (MPCV) to prepare its subsystems for EM-1 (Exploration Mission-1). EM-1, Orions second unmanned flight, is a three-week long lunar mission during which the vehicle will complete a 6-day retrograde lunar orbit before returning to Earth. This paper focuses on the work done during the authors 16-week internship with the Mechanical Engineering Branch of KSCs Engineering Directorate. The authors project involved assisting with the preparations for testing the Orion MPCVs ammonia boiler system. The purpose of the ammonia boiler system is to keep the spacecraft sufficiently cool during the reentry portion of its mission, from service module (SM) separation to post-landing. This system is critical for keeping both the spacecraft (avionics and electronics) and crew alive during reentry, thus a successful test of the system is essential to the success of EM-1. XXXX The author was able to draft a detailed outline of the procedure for the ammonia system functional test. More work will need to be done on the vehicle power-up and power-down portions of the procedure, but the ammonia system testing portion of the procedure is thorough and includes vehicle test configurations, vehicle commands, and GSE. The author was able to compile a substantial list of questions regarding the ammonia system functional test with the help of her mentors. A significant number of these questions were answered in the teleconferences with Lockheed Martin.

  2. Preparation and Characterization of Calcium Carbonate Nanoparticles

    Science.gov (United States)

    Hassim, Aqilah; Rachmawati, Heni

    2010-10-01

    Taking calcium supplements can reduce the risk of developing osteoporosis, but they are not readily absorbed in the gastrointestinal tract. Nanotechnology is expected to resolve this problem. In this study, we prepared and characterized calcium carbonate nanoparticle to improve the solubility by using bottom-up method. The experiment was done by titrating calcium chloride with sodium carbonate with the addition of polyvinylpyrrolidone (PVP) as stabilizer, using ultra-turrax. Various concentrations of calcium chloride and sodium carbonate as well as various speed of stirring were used to prepare the calcium carbonate nanoparticles. Evaluations studied were including particle size, polydispersity index (PI) and zeta potential with particle analyzer, surface morphology with scanning electron microscope, and saturated solubility. In addition, to test the ability of PVP to prevent particles growth, short stability study was performed by storing nano CaCO3 suspension at room temperature for 2 weeks. Results show that using 8000 rpm speed of stirring, the particle size tends to be bigger with the range of 500-600 nm (PI between 0.2-0.4) whereas with stirring speed of 4000 rpm, the particle size tends to be smaller with 300-400 nm (PI between 0.2-0.4). Stirring speed of 6000 rpm produced particle size within the range of 400-500 nm (PI between 0.2-0.4). SEM photograph shows that particles are monodisperse confirming that particles were physically stable without any agglomeration within 2 weeks storage. Taken together, nano CaCO3 is successfully prepared by bottom-up method and PVP is a good stabilizer to prevent the particle growth.

  3. Development of radioisotope preparation and application technology

    Energy Technology Data Exchange (ETDEWEB)

    Han, Hyon Soo; Park, K. B.; Bang, H. S. [and others

    2000-04-01

    The purpose of this project is to develop RI production technology utility 'HANARO' and to construct a sound infra-structure for mass production and supply to domestic users. The developed contents and results are as follows: two types of rig for irradiation in reactor core were designed and manufactured. The safety of OR rig during irradiation was identified through various test and it is used for RI production. The prepared IR rig will be used to performance tests for safety. We prepared two welders and welding jigs for production of sealed sources, and equipments for quality control of the welded materials. Production processes and apparatus Cr-51, P-32, I-125 and Sr-89, were developed. Developed results would be used for routine production and supply of radioisotopes. The automatic Tc-99m extraction apparatus was supplied to Libya under IAEA support. For approval on special form radioactive material of the developed Ir-192 source assembly and projector documents were prepared and submitted to MOST. The high dose rate Ir-192 source(diameter 1.1 mm, length 5.2 mm) for RALS and the laser welding system for its fabrication were developed. Production technologies of Ir-192 sources for destructive test and medical therapy were transferred to private company for commercial supply. The chemical immobilization method based on the self-assemble monolayer of {omega}-functionalized thiol and the sensing scheme based on the beta-emitter labeling method were developed for the fabrication radioimmuno-sensors. Results of this study will be applied to mass production of radioisotopes 'HANARO' and are to contribute the advance of domestic medicine and industry related to radioisotopes.

  4. Spectrofluorimetric determination of fluoroquinolones in pharmaceutical preparations

    Science.gov (United States)

    Ulu, Sevgi Tatar

    2009-02-01

    Simple, rapid and highly sensitive spectrofluorimetric method is presented for the determination of four fluoroquinolone (FQ) drugs, ciprofloxacin, enoxacin, norfloxacin and moxifloxacin in pharmaceutical preparations. Proposed method is based on the derivatization of FQ with 4-chloro-7-nitrobenzofurazan (NBD-Cl) in borate buffer of pH 9.0 to yield a yellow product. The optimum experimental conditions have been studied carefully. Beer's law is obeyed over the concentration range of 23.5-500 ng mL -1 for ciprofloxacin, 28.5-700 ng mL -1 for enoxacin, 29.5-800 ng mL -1 for norfloxacin and 33.5-1000 ng mL -1 for moxifloxacin using NBD-Cl reagent, respectively. The detection limits were found to be 7.0 ng mL -1 for ciprofloxacin, 8.5 ng mL -1 for enoxacin, 9.2 ng mL -1 for norfloxacin and 9.98 ng mL -1 for moxifloxacin, respectively. Intra-day and inter-day relative standard deviation and relative mean error values at three different concentrations were determined. The low relative standard deviation values indicate good precision and high recovery values indicate accuracy of the proposed methods. The method is highly sensitive and specific. The results obtained are in good agreement with those obtained by the official and reference method. The results presented in this report show that the applied spectrofluorimetric method is acceptable for the determination of the four FQ in the pharmaceutical preparations. Common excipients used as additives in pharmaceutical preparations do not interfere with the proposed method.

  5. Chitin nanofibers: preparations, modifications, and applications

    Science.gov (United States)

    Ifuku, Shinsuke; Saimoto, Hiroyuki

    2012-05-01

    Chitin nanofibers are prepared from the exoskeletons of crabs and prawns by a simple mechanical treatment after the removal of proteins and minerals. The obtained nanofibers have fine nanofiber networks with a uniform width of approximately 10-20 nm and a high aspect ratio. The method used for chitin-nanofiber isolation is also successfully applied to the cell walls of mushrooms. They form a complex with glucans on the fiber surface. A grinder, a Star Burst atomization system, and a high speed blender are all used in the mechanical treatment to convert chitin to nanofibers. Mechanical treatment under acidic conditions is the key to facilitate fibrillation. At pH 3-4, the cationization of amino groups on the fiber surface assists nano-fibrillation by electrostatic repulsive force. By applying this finding, we also prepared chitin nanofibers from dry chitin powder. Chitin nanofibers are acetylated to modify their surfaces. The acetyl DS can be controlled from 1 to 3 by changing the reaction time. An acetyl group is introduced heterogeneously from the surface to the core. Nanofiber morphology is maintained even in the case of high acetyl DS. Optically transparent chitin nanofiber composites are prepared with 11 different types of acrylic resins. Due to the nano-sized structure, all of the composites are highly transparent. Chitin nanofibers significantly increase the Young's moduli and the tensile strengths and decrease the thermal expansion of all acrylic resins due to the reinforcement effect of chitin nanofibers. Chitin nanofibers show chiral separation ability. The chitin nanofiber membrane transports the d-isomer of glutamic acid, phenylalanine, and lysine from the corresponding racemic amino acid mixtures faster than the corresponding l-isomer. The chitin nanofibers improve clinical symptoms and suppress ulcerative colitis in a DSS-induced mouse model of acute ulcerative colitis. Moreover, chitin nanofibers suppress myeloperoxidase activation in the colon and

  6. Preparation of Porous Calcium Phosphate Bioceramic

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    Porous calcium phosphate ceramics were prepared by slip casting and molding method respectively. By these two different methods, different microstructures can be got. By slip casting method, the pore size was 100- 350μm and 20- 80μm; pores were opened, interconnected and ball-like; the grain size was 2- 4 μm.By molding method, the pore size was 100-500 μm and 1-10μm; the grain size was 2-8μm. By slip casting method regular and interconnected pores can be got. By molding method the porosity and strength can be adjusted easily.

  7. Preparation of Spherical Microfinc Silicon Powder

    Institute of Scientific and Technical Information of China (English)

    SHENG Yong; Zou Jun; LI Bing; TU Mingjing

    2008-01-01

    Under certain conditions of proper temperature and pH value,sodium silicate was hydrolyzed in liquid ammonia chloride,and spherical microfine SiO2 powder in micrometer-size was prepared.In this experiment,the relationship between needed time and proper pH value,temperature,density ofthe solution.and its current capacity were found.The optimum conditions are pH 8.5,70℃,and the concentration of sodium silicate is O.6 mol/L for the density ofthe solution.The structure of spherical microfine silicon was charactetized by SEM andXRD.

  8. Preparation of rodent testis co-cultures.

    Science.gov (United States)

    Wegner, Susanna; Hong, Sungwoo; Yu, Xiaozhong; Faustman, Elaine M

    2013-02-01

    Male reproductive development is a complex process that is sensitive to disruption by a range of toxicants. There is a great need for in vitro models that can evaluate potential male reproductive toxicants. The current unit presents a protocol for preparation of a three-dimensional in vitro model of male reproductive development that reduces the number of animals required for evaluation of toxicants. A Matrigel overlay provides a three-dimensional extracellular matrix that improves cell attachment, viability, and communication, and makes the model more reflective of in vivo environments. © 2013 by John Wiley & Sons, Inc.

  9. Preparation and Characterization of Acylated Chitosan

    Institute of Scientific and Technical Information of China (English)

    LI Ming-chun; LIU Chao; XIN Mei-hua; ZHAO Huang; WANG Min; FENG Zhen; SUN Xiao-li

    2005-01-01

    Fully acylated chitosan and N, N-diacyl chitosan were prepared. The products were characterized by elemental analysis, FTIR and 1H NMR. The experimental results indicate that the average degree of acylation depends on the volume ratio of pyridine to chloroform in the reaction medium, the chain length of the acylation agent used, and the molecular weight of chitosan raw materials. The XRD measurements were carried out for pure chitosan, fully acylated chitosan and N, N-diacyl chitosan to verify the crystallinity change caused by the acylation.

  10. Silica Microcapsules Prepared by Interfacial Reaction Methods

    Institute of Scientific and Technical Information of China (English)

    M; Fujiwara; K; Shiokawa; Y; Nakahara

    2007-01-01

    1 Results Silica spherical particles with hollow structure are directly prepared by interfacial reaction methods using W/O/W emulsion (schematic diagram in Fig.1)[1].Fig.1 Silica microcapsule formationThe mixing of W/O emulsion consisting of sodium silicate solution (inner water phase) and n-hexane solution (oil phase) to outer water phase dissolving NH4HCO3 or other salts affords silica microcapsules.The critical feature of this method is the direct formation of hollow structure.Therefore,the core com...

  11. Stability of extemporaneously prepared rufinamide oral suspensions.

    Science.gov (United States)

    Hutchinson, David J; Liou, Yayin; Best, Robert; Zhao, Fang

    2010-03-01

    Rufinamide is an oral antiepileptic drug indicated for adjunctive therapy in treating generalized seizures associated with Lennox-Gastaut syndrome. Currently, rufinamide is available as 200-mg and 400-mg tablets. A liquid dosage form does not exist at the present time. Lack of a suspension formulation may present an administration problem for many children and adults who are unable to swallow tablets. The availability of a liquid dosage form will provide an easy and accurate way to measure and administer the medication. To determine the stability of both sugar-containing and sugar-free rufinamide suspensions over a 90-day period. A suspension of rufinamide 40 mg/mL was prepared by grinding twelve 400-mg tablets of rufinamide tablets in a glass mortar. Sixty milliliters of Ora-Plus and 60 mL of either Ora-Sweet or Ora-Sweet SF (sugar free) were mixed and added to the powder to make a final volume of 120 mL. Three identical samples of each formulation were prepared and placed in 60-mL amber plastic bottles and were stored at room temperature. A 1-mL sample was withdrawn from each of the 6 bottles with a micropipette immediately after preparation and at 7, 14, 28, 56, and 90 days. After further dilution to an expected concentration of 0.4 mg/mL, the samples were assayed using high-performance liquid chromatography. Stability was defined as the retention of at least 90% of the initial concentration. At least 90% of the initial rufinamide concentration remained throughout the 90-day study period in both preparations. There were no detectable changes in color, odor, taste, and pH and no visible microbial growth. Extemporaneously compounded suspensions of rufinamide 40 mg/mL in a 1:1 mixture of Ora-Plus and Ora-Sweet or Ora-Sweet SF were stable for at least 90 days when stored in 59-mL amber polypropylene plastic bottles at room temperature.

  12. Preparation of Impact and Weather Resistant Copolymer

    Institute of Scientific and Technical Information of China (English)

    LIANG Tao

    2001-01-01

    @@ Synthesis method of the resin is that crosslinked polybutyl acrylate latex is used as base latex. Styrene (St) and acrylonitrile (AN) are grafted onto polybutyl acrylate latex particle and turn into core-shell copolymer. The resin is a good resin's impact modifier. There are study of influence regularity about additive emulsifier, initiator, monomer concentration, the ratio of St to AN, chain transfer to graft polymerization. A kind of core-shell resin used as impact modifier is obtained. (A) Preparation of Crosslinked Butyl Acrylate Rubber Latex

  13. Preparation of Impact and Weather Resistant Copolymer

    Institute of Scientific and Technical Information of China (English)

    LIANG; Tao

    2001-01-01

    Synthesis method of the resin is that crosslinked polybutyl acrylate latex is used as base latex. Styrene (St) and acrylonitrile (AN) are grafted onto polybutyl acrylate latex particle and turn into core-shell copolymer. The resin is a good resin's impact modifier. There are study of influence regularity about additive emulsifier, initiator, monomer concentration, the ratio of St to AN, chain transfer to graft polymerization. A kind of core-shell resin used as impact modifier is obtained. (A) Preparation of Crosslinked Butyl Acrylate Rubber Latex  ……

  14. Resin catalysts and method of preparation

    Science.gov (United States)

    Smith, L.A. Jr.

    1986-12-16

    Heat stabilized catalyst compositions are prepared from nuclear sulfonic acid, for example, macroporous crosslinked polyvinyl aromatic compounds containing sulfonic acid groups are neutralized with a metal of Al, Fe, Zn, Cu, Ni, ions or mixtures and alkali, alkaline earth metals or ammonium ions by contacting the resin containing the sulfonic acid with aqueous solutions of the metals salts and alkali, alkaline earth metal or ammonium salts. The catalysts have at least 50% of the sulfonic acid groups neutralized with metal ions and the balance of the sulfonic acid groups neutralized with alkali, alkaline earth ions or ammonium ions.

  15. Preparing Apigenin from Leaves of Adinandra nitida

    Directory of Open Access Journals (Sweden)

    Zhengxiang Ning

    2008-01-01

    Full Text Available Leaves of Adinandra nitida were used as raw material, and a new industrially significant method of preparing apigenin was established by hydrolyzing a water extract and recrystallizing it with ethanol in order to obtain a new source for the production of this flavone. A yield of about 2.5 % (dry mass was obtained with the purity of 93.05 %, determined by high performance liquid chromatography (HPLC. Moreover, the main flavonoids in leaves of Adinandra nitida and the product after acid hydrolysis were identified as camellianin A and apigenin, respectively, by ultraviolet-visible spectrometry (UV/VIS and electrospray ionization mass spectrometry (ESI-MS.

  16. ATLAS Data Preparation in Run 2

    CERN Document Server

    Laycock, Paul; The ATLAS collaboration

    2017-01-01

    In this contribution, the data preparation workflows for Run 2 are presented. The challenges posed by the excellent performance and high live time fraction of the LHC are discussed, and the solutions implemented by ATLAS are described. The prompt calibration loop procedures are described and examples are given. Several levels of data quality assessment are used to quickly spot problems in the control room and prevent data loss, and to provide the final selection used for physics analysis. Finally the data quality efficiency for physics analysis is shown.

  17. Preparation of porous lanthanum phosphate with templates

    Energy Technology Data Exchange (ETDEWEB)

    Onoda, Hiroaki, E-mail: onoda@kpu.ac.jp [Department of Informatics and Environmental Sciences, Faculty of Life and Environmental Sciences, Kyoto Prefectural University, 1-5, Shimogamo Nakaragi-cyo, Sakyo-ku, Kyoto 606-8522 (Japan); Ishima, Yuya [Department of Applied Chemistry, Faculty of Life Sciences, Ritsumeikan University, 1-1-1, Nojihigashi, Kusatsu, Shiga 525-8577 (Japan); Takenaka, Atsushi [Department of Materials Science, Yonago National College of Technology, 4448, Hikona-cho, Yonago, Tottori 683-8502 (Japan); Tanaka, Isao [Department of Materials Science and Engineering, Faculty of Engineering, Kyoto University, Yoshida-Honmachi, Sakyo-ku, Kyoto 606-8501 (Japan)

    2009-08-05

    Malonic acid, propionic acid, glycine, n-butylamine, and urea were added to the preparation of lanthanum phosphate from lanthanum nitrate and phosphoric acid solutions. All additives were taken into lanthanum phosphate particles. The additives that have a basic site were easy to contain in precipitates. The addition of templates improved the specific surface area of lanthanum phosphate. The amount of pore, with radius smaller than 4 nm, increased with the addition of templates. The remained additives had influence on the acidic properties of lanthanum phosphate.

  18. Remote State Preparation with Genuine Multipartite Entanglement

    Institute of Scientific and Technical Information of China (English)

    MA Yi-Cong; ZHANG Yong-Sheng; GUO Guang-Can

    2007-01-01

    Enlightened by the work of Yeo and Chua [Phys. Rev. Lett. 96 (2006) 060502] for teleportation and dense coding with genuine multipartite entanglement, we present an explicit protocol for faithful remote state preparation in a real coefficient case by using the same four-particle entangled state which is not reducible to pair of Bell states.It is shown that any complex coefficient case can be changed to a real coefficient case. With this protocol, the state can play an analogous role to Einstein-Podolsky-Rosen pairs in the theory of multipartite entanglement.

  19. Preparation of Thin Metal Layers on Polymers

    Directory of Open Access Journals (Sweden)

    J. Siegel

    2007-01-01

    Full Text Available Continuous gold layers of increasing thickness were prepared by the vacuum deposition method on pristine and plasma modified sheets of  PE, PET and PTFE. Various surface profiles were obtained. The surface morphology was studied using atomic force microscopy (AFM. The continuity of the metal layer on the polymer surface was validated by measuring its electrical resistance. Changes in the wettability of the plasma treated polymers were evaluated by measuring the aging curves. These were obtained as the dependence of contact angle on ageing time. 

  20. Preparation and characterization of nano hydroxyapatite sol

    Institute of Scientific and Technical Information of China (English)

    王友法; 闫玉华; 任卫; 曹献英; 李世普

    2004-01-01

    Nano hydroxyapatite has special biological effects when it interacts with cells. The method of preparation of nano hydroxyapatite crystals in water and the stability of hydroxyapatite sol are reported. Nanometer sized hydroxyapatite crystals were synthesized by precipitation with monocalcium phosphate and calcium hydroxide. The size of the crystals is 30 - 50 nm as determined by laser light scattering and transmission electron microscopy (TEM). The shape of the crystals particles is either sphere or rod-shaped. Beijing Synchrotron Radiation Facility (BSRF) micro-probe X-ray fluorescence analysis and TEM analysis reveal that hydroxyapatite crystals can pass human liver cancer cell membrane in the form of particles.

  1. Preparing and evaluating delivery systems for proteins

    DEFF Research Database (Denmark)

    Jorgensen, L; Moeller, E H; van de Weert, M

    2006-01-01

    From a formulation perspective proteins are complex and therefore challenging molecules to develop drug delivery systems for. The success of a formulation depends on the ability of the protein to maintain the native structure and activity during preparation and delivery as well as during shipping...... and long-term storage of the formulation. Therefore, the development and evaluation of successful and promising drug delivery systems is essential. In the present review, some of the particulate drug delivery systems for parenteral delivery of protein are presented and discussed. The challenge...... for incorporation of protein in particulate delivery systems is exemplified by water-in-oil emulsions....

  2. Preparation of chitosan nanofiber tube by electrospinning.

    Science.gov (United States)

    Matsuda, Atsushi; Kagata, Go; Kino, Rikako; Tanaka, Junzo

    2007-03-01

    Water-insoluble chitosan nanofiber sheets and tubes coated with chitosan-cast film were prepared by electrospinning. When as-spun chitosan nanofiber sheets and tubes were immersed in 28% ammonium aqueous solution, they became insoluble in water and showed nanofiber structures confirmed by SEM micrography. Mechanical properties of chitosan nanofiber sheets and tubes were improved by coating with chitosan-cast film, which gave them a compressive strength higher than that of crab-tendon chitosan, demonstrating that chitosan nanofiber tubes coated with chitosan-cast film are usable as nerve-regenerative guide tubes.

  3. Study on the preparation of Pt nanocapsules

    Science.gov (United States)

    Zhang, Yi-fan; Ji, Zhen; Chen, Ke; Liu, Bo-wen; Jia, Cheng-chang; Yang, Shan-wu

    2017-01-01

    Ag@Pt core-shell nanoparticles (Ag@Pt NPs) were prepared by a co-reduction method. Pt nanocapsules with diameters of less than 10 nm were obtained by an electrochemical method. Cyclic voltammetry (CV) scanning was used to cavitate the Ag@Pt NPs, and the morphology, structure, and cavitation conditions were studied. The results indicate that the effective cavitation conditions to obtain Pt nanoparticles from Ag@Pt NPs are a scanning voltage of 0 to 0.8 V and continuous CV scanning over 2 h. This cavitation method is also applicable for the syntheses of Ir, Ru, and Ru-Pt nanocapsules.

  4. Preparation and analysis of zirconia oxygen sensors

    Institute of Scientific and Technical Information of China (English)

    LUO Zhi-an; XIAO Jian-zhong; XIA Feng

    2006-01-01

    Thimble zirconia oxygen sensors were prepared with yttria stabilized zirconia(YSZ). The surfaces of the electrode,electrolyte and their interface were observed by scanning electron microscope(SEM). The sensor was examined with engine bench test to evaluate the essential performance. The results show that the oxygen sensor has good performance,which can meet the demand of practical applications. Chemical equilibrium theory was introduced to explain electromotive force of the sensors and the influence of temperature on the signals. The educed theoretical model of electromotive force agrees well with testing results.

  5. Preparation of deglycosylated egg white avidin.

    Science.gov (United States)

    Bayer, E A; De Meester, F; Kulik, T; Wilchek, M

    1995-04-01

    A simple procedure for the preparation of deglycosylated avidin is described. Commercially obtained avidin was treated with a mixed microbial culture. The cells were capable of growing on the oligosaccharide residues, but generally ignored the polypeptide portion of the egg white glycoprotein. The resultant deglycosylated avidin retained its biotin-binding characteristics. The major bacterial strain (strain BECH080), responsible for the deglycosylation, was isolated. On the basis of elementary biochemical tests, fatty acid, and phenotypic analyses, the isolate was identified as a strain of Flavobacterium meningosepticum. The primary enzymatic activity that caused the removal of the oligosaccharide residues of avidin appeared to be similar to endoglycosidase F.

  6. Process for preparation of MR contrast agents

    DEFF Research Database (Denmark)

    2002-01-01

    The present invention provides a process for the preparation of an MR contrast agent, said process comprising: i) obtaining a solution in a solvent of a hydrogenatable, unsaturated substrate compound and a catalyst for the hydrogenation of said substrate compound; ii) introducing said solution...... in droplet form into a chamber containing hydrogen gas (H2) enriched in para-hydrogen (p-1H2) and/or ortho-deuterium (o-2H2) whereby to hydrogenate said substrate to form a hydrogenated imaging agent; iii) optionally subjecting said hydrogenated imaging agent to a magnetic field having a field strength below...

  7. Preparation of some new coumarin dyes

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Series of coumarins containing heterocyclic substituent in 3-position were prepared.Sulfonyl chloride, a reactive group, was drawn into the heterocycle, and further condensed withamines to give series of new compounds that contain N-alkyl sulfamide. The spectral propertiesand dyeing character of these new dyes are discussed. A bathochromic shift (10 nm), enhancedfastness in light and sublimation (1-2 grade) and larger molar extinction coefficient (increase 104L ·mol-1 ·cm-1) are apparent with these new compounds. In the meantime, larger solubility appearswith these new compounds.

  8. Preparation and Conductivity of Triheteropoly Tungstozincoaluminic Acid

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The ternary undecatungstozincoaluminic heteropoly acid H7[Al(H2O)ZnW11O39]·12H2O was prepared by the ion exchanging-cooling method. The optimal proportion of solutions of the component elements and the pH of the synthesis reaction were given. The product was characterized by chemical analysis, potentiometric titration, IR, UV, XRD and TG-DTA. AC impedance measurement results show that its proton conductivity is S/cm at 18℃.

  9. Preparation and Properties of Polyaniline Composite Films

    Institute of Scientific and Technical Information of China (English)

    ZHANG Qing-hua

    2002-01-01

    Polyaniline (PAn) was synthesized by chemical oxidation polymerization. The conductive polymer doped by camphor sulfonic acid (CSA) and a matrix polymer,polyamide- 66, polyamide - 1010 or polyamide- 11, were dissolved in m-cresol and the blend solution was cast in a glass and dried for preparing polyaniline composite films.Conductivity was from 10 -6 to 10 0Ω-1·cm-1 with different weight fraction of PAn-CSA. The crystallizttion of the films was studied by means of differential scanning calorimeter (DSC). The treatment of the composite films in different pH value solution would result in decrease of conductivity, especially in an alkaline solution.

  10. Preparation of counterion stabilized concentrated silver sols.

    Science.gov (United States)

    LaPlante, Sylas; Halaciuga, Ionel; Goia, Dan V

    2011-07-01

    A strategy for obtaining stable concentrated silver dispersions without dedicated stabilizing agents is presented. This approach consists of rapidly mixing aqueous solutions of silver salicylate and ascorbic acid. By using salicylate as Ag(+) counterion, it is possible to prepare stable sols with metal concentrations up to two orders of magnitude higher than with silver nitrate. The stabilizing effect of the counterion is the result of a decreased ionic strength due to salicylate protonation and its adsorption on the surface of silver. Both effects increase the range of the electrostatic repulsive forces by expanding the electrical double layer. Copyright © 2011 Elsevier Inc. All rights reserved.

  11. Preparation and evaluation of sulphonamide nonionic surfactants

    Directory of Open Access Journals (Sweden)

    Ahmed, M. H. M.

    2010-03-01

    Full Text Available Alkyl (octyl, decyl and dodecyl; C8,C10 and C12 benzene sulphonyl chloride was used in the preparation of a novel series of nonionic surfactants (IV-VIa-c, (VII-IX a-c and (X-XIIa-c. The preparations were completed by reacting each alkyl (C8,C10 and C12 benzene sulphonyl chloride with ethanolamine to give (I-III respectively. The resulting products were reacted separately with ethylene oxide in the presence of different (base KOH, Lewis acid SnCl4 and k10 clay catalysts to produce different moles of nonionic surfactants (5, 7 and 9 in sequence corresponding to (IV-VIa-c, (VII-IX a-c and (X-XIIa-c respectively. The chemical structures of prepared nonionic surfactants were elucidated by IR and 1HNMR spectra. The surface activity, biodegradability and biological activities of the prepared compounds were investigated. The obtained data show that these compounds have good surface and biological activities as well as reasonable biodegradability properties.Cloruros de sulfonilbenceno alquilados (octil, decil, dodecil; C8, C10 y C12 fueron usados en la preparación de una nueva serie de surfactantes no iónicos (IV-VIa-c, (VII-IX a-c and (X-XIIa-c. Las preparaciones fueron completadas por reacción de cada cloruro de sulfonilbenceno alquilado (C8, C10 y C12 con etanolamina para dar los compuestos (IIII, respectivamente. Los anteriores productos reaccionaron separadamente con óxido de etileno en presencia de diferentes catalizadores (la base KOH, el ácido de Lewis SnCl4 y la arcilla k10 para producir secuencialmente diferentes surfactantes no iónicos con distintos moles de óxido de etileno (5, 7 y 9: (IV-VIa-c, (VII-IXa-c and (X-XIIa-c, respectivamente. La estructura química de los surfactantes no iónicos preparados fueron elucidadas mediante sus espectros de IR y 1H RMN. Las propiedades tensoactivas, biodegradabilidad y actividad biológica de los compuestos preparados fueron investigados. Los datos obtenidos muestran que estos compuestos tienen

  12. Functional Ag porous films prepared by electrospinning

    Science.gov (United States)

    Dong, Guoping; Xiao, Xiudi; Liu, Xiaofeng; Qian, Bin; Liao, Yang; Wang, Chen; Chen, Danping; Qiu, Jianrong

    2009-06-01

    Face-centered cubic Ag porous films have been prepared directly from the heat treatment of AgNO 3-doped poly(vinyl alcohol) (PVA) electrospun nanofibers. Using Rhodamine B (RB) as the probing molecule, the surface-enhanced Raman scattering (SERS) effect of Ag porous films was demonstrated. The antibacterial activity of Ag porous films was also studied in this work. The propagation and biological activity of yeast cells were effectively inhibited by Ag porous films. These functional Ag porous films were expected to be applied in many fields, such as catalysis, diagnostics, sensors and antibacterial, etc.

  13. Gerontological nursing. Faculty preparation for teaching.

    Science.gov (United States)

    Yurchuck, E R; Kee, C C

    1991-10-01

    1. As the number of older adults in the US increases, nurse educators must be prepared to teach gerontological nursing to their students. A 3-year project addresses the need for faculty development in gerontological nursing. 2. A major objective of the project is to provide basic knowledge of gerontological nursing to regional nursing faculty through a series of 1-week workshops that include didactic content and clinical observation experiences. 3. All 1990 workshops were filled to capacity, with participants exhibiting wide variation in their gerontological knowledge base.

  14. Preparing Teachers for Anti-oppressive Education

    DEFF Research Database (Denmark)

    Baber, Sikunder Ali

    2004-01-01

    While theories and recommendations continue to proliferate in the educational research literature on what it means to teach towards social justice and to prepare teachers for such teaching, so do concerns that these theories and recommendations fail to account for the ways that the contexts...... of teaching cultural contexts, national contexts, political contexts always affect teaching in idiosyncratic, unpredictable and even contradictory ways. Given that much educational research fails to trouble the US-centric nature of prevailing conceptions of social justice and teacher education...

  15. Conductive ceramic composition and method of preparation

    Science.gov (United States)

    Smith, J.L.; Kucera, E.H.

    1991-04-16

    A ceramic anode composition is formed of a multivalent metal oxide or oxygenate such as an alkali metal, transition metal oxygenate. The anode is prepared as a non-stoichiometric crystalline structure by reaction and conditioning in a hydrogen gas cover containing minor proportions of carbon dioxide and water vapor. The structure exhibits a single phase and substantially enhanced electrical conductivity over that of the corresponding stoichiometric structure. Unexpectedly, such oxides and oxygenates are found to be stable in the reducing anode fuel gas of a molten carbonate fuel cell. 4 figures.

  16. Biosurfactants for microbubble preparation and application.

    Science.gov (United States)

    Xu, Qingyi; Nakajima, Mitsutoshi; Liu, Zengshe; Shiina, Takeo

    2011-01-17

    Biosurfactants can be classified by their chemical composition and their origin. This review briefly describes various classes of biosurfactants based on their origin and introduces a few of the most widely used biosurfactants. The current status and future trends in biosurfactant production are discussed, with an emphasis on those derived from plants. Following a brief introduction of the properties of microbubbles, recent progress in the application of microbubble technology to molecular imaging, wastewater treatment, and aerobic fermentation are presented. Several studies on the preparation, characterization and applications of biosurfactant-based microbubbles are reviewed.

  17. Method to prepare nanoparticles on porous mediums

    Science.gov (United States)

    Vieth, Gabriel M [Knoxville, TN; Dudney, Nancy J [Oak Ridge, TN; Dai, Sheng [Knoxville, TN

    2010-08-10

    A method to prepare porous medium decorated with nanoparticles involves contacting a suspension of nanoparticles in an ionic liquid with a porous medium such that the particles diffuse into the pores of the medium followed by heating the resulting composition to a temperature equal to or greater than the thermal decomposition temperature of the ionic liquid resulting in the removal of the liquid portion of the suspension. The nanoparticles can be a metal, an alloy, or a metal compound. The resulting compositions can be used as catalysts, sensors, or separators.

  18. Preparation, Characterization, and Application of Antiharpinxoo Antibody

    Institute of Scientific and Technical Information of China (English)

    SHAO Min; LI Ming; PAN Xiao-mei; WANG Jin-sheng

    2006-01-01

    Polyclonal antiharpinxoo rabbit antibody has been prepared successfully using purified harpinxoo protein as an immunogen.The ELISA titer of the antiserum against harpinxoo was about 1:2 000. Western blot analysis showed that the antiserum could bind to the expression harpinxoo protein in particular. hrf1, encoding harpinxoo, is an expression in transgenic rice,detected by antiharpinxoo rabbit antibody. The rabbit antibody against harpinxoo can be used to study further about the biological function, harpinxoo localization, and hrf1 gene expression in other plants.

  19. Method of 14C Sample Preparation for AMS Measurement

    Directory of Open Access Journals (Sweden)

    YANG Xu-ran

    2015-02-01

    Full Text Available In order to carry out the application research of 14C by accelerator mass spectrometry (AMS, the principle of sample preparation were systematically studied and more attention was paid to improve the preparation process efficiently. The set of integrated system of sample preparation was built up on the research. The experimental results showed that the sample preparation scheme was able to meet the demand of AMS measurement.

  20. Preparation and evaluation of veterinary 20% injectable solution of tylosin

    OpenAIRE

    2010-01-01

    A veterinary injectable aqueous solution of the antibiotic tylosin at a concentration of 20% was prepared under aseptic conditions in dark glass bottles each containing 100 ml. The preparation was intended for animal use only. It contained 200 g tylosin tartrate, 500 ml propylene glycol, benzyl alcohol 40 ml as a preservative and water for injection up to 1000 ml. The preparation was clear yellow viscous aqueous solution free from undesired particles. The preparation complied with the require...

  1. Evolution of Hydrogen Storage Alloys Prepared by Special Methods

    Institute of Scientific and Technical Information of China (English)

    Guo Hong; Zhang Ximin; Jing Hai; Li Chengdong; Xu Jun

    2004-01-01

    Microstructure characteristics and electrochemical properties of hydrogen storage alloys prepared by gas atomization, melt spinning and strip casting respectively were outlined.The advantages, disadvantages and research development of the above methods for preparing hydrogen storage alloys were explained.The strip casting is a new special means for preparing AB5 rare earth hydrogen storage alloys of high performance and low cost, and the study of the strip casting for preparing hydrogen storage alloys is presented specially.

  2. Methods of preparation of Swazi traditional fermented foods

    Directory of Open Access Journals (Sweden)

    Protus Simatende

    2015-09-01

    Conclusion: Umcombotsi, emahewu, buganu, and emasi were the fermented foods commonly prepared at a household level in the Hhohho region, Swaziland. The main ingredient used for preparing umcombotsi and emahewu was maize meal. Unmilled sorghum malt was also added during preparation of umcombotsi. However, typically no malt was added during the preparation of emahewu. Buganu and emasi also play an important role in the diet and socioeconomic activities of the population in Swaziland.

  3. Fracture Resistance of Composite Veneers with Different Preparation Designs

    OpenAIRE

    Zlatanovska, Katerina; Guguvcevski, Ljuben; Popovski, Risto; Dimova, Cena; Minovska, Ana; Mijoska, Aneta

    2016-01-01

    Background: The aim of this in vitro study was to examine the fracture load of composite veneers using three different preparation designs. Material and methods: Fifteen extracted, intact, human maxillary central incisors were selected. Teeth were divided into three groups with different preparation design: 1) feather preparation, 2) bevel preparation, and 3) incisal overlap- palatal chamfer. Teeth were restored with composite veneers, and the specimens were loaded to failure. The localizatio...

  4. [Preparation of ferulic acid, senkyunolide I and senkyunolide H from Ligusticum chuanxiong by preparative HPLC].

    Science.gov (United States)

    Xiong, Yao-Kun; Liang, Shuang; Hong, Yan-Long; Yang, Xiu-Juan; Shen, Lan; Du, Yan; Feng, Yi

    2013-06-01

    Preparative HPLC was used to prepare ferulic acid, senkyunolide I and senkyunolide H from Ligusticum chuanxiong. The separation was conducted on a Shim-Pack Prep-ODS (20.0 mm x 250 mm, 5 microm) column with the mobile phase of methanol-0.2% glacial acetic acid (50:50)at the flow rate of 5 mL x min(-1). The detection wavelength was 278 nm, and the purity of each compound was detected by HPLC analysis. Spectral data analyses including UV, ESI-MS and NMR were used to identify their structures. This method is simple, fast, which is suitable for preparation of standard reference of ferulic acid, senkyunolide I and senkyunolide H from L. chuanxiong and can meet the requirement of new drug research and development.

  5. Establishing Instructional Technology Benchmarks for Teacher Preparation Programs.

    Science.gov (United States)

    Northrup, Pamela Taylor; Little, Wesley

    1996-01-01

    Examines technology use in teacher preparation, emerging state and national standards for educators and technology, and benchmarks for teacher preparation programs (including faculty preparation), and notes the importance of creating school-business partnerships to help finance this costly venture. (SM)

  6. Predicting Marital Success with PREPARE: A Predictive Validity Study.

    Science.gov (United States)

    Fowers, Blaine J.; Olson, David H.

    1986-01-01

    Assessed the utility of the premarital inventory, PREPARE, in predicting marital success. Conducted a three-year follow-up study with couples (N=164) who took PREPARE during their engagement. Found that the PREPARE scores from three months before marriage could predict with 80-90% accuracy which couples were separated and divorced from those that…

  7. 7 CFR 905.8 - Prepare for market.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Prepare for market. 905.8 Section 905.8 Agriculture... TANGELOS GROWN IN FLORIDA Order Regulating Handling Definitions § 905.8 Prepare for market. Prepare for market means to wash, grade, size, or place fruit (whether or not wrapped) into any container...

  8. Preparation and Photocatalytic Characterization of Nanoporous TiO2

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Nanoporous TiO2 photocatalysts were prepared by use of controlled drying method with surfactants. The surface area and porous properties are dependent on the chain length of incorporated surfactant cation. The TiO2 materials prepared in the presence of surfactant molecules during the gel formation exhibit much higher photocatalytic activity than that prepared in the absence of surfactants.

  9. 48 CFR 315.372 - Preparation of negotiation memorandum.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Preparation of negotiation... CONTRACTING METHODS AND CONTRACT TYPES CONTRACTING BY NEGOTIATION Source Selection 315.372 Preparation of negotiation memorandum. The Contracting Officer shall prepare a negotiation memorandum, or summary...

  10. Teachers' Preparation Needs for Integrating Technology in the Classroom

    Science.gov (United States)

    Jackson, Barcus C.

    2013-01-01

    School districts across the country are charged with preparing the next generation for competing in a global economy and have spent billions of dollars on technology acquisition and Internet use. However, teachers do not feel prepared to integrate technology in the classroom. To prepare teachers for technology integration, the most common approach…

  11. Teachers' Preparation Needs for Integrating Technology in the Classroom

    Science.gov (United States)

    Jackson, Barcus C.

    2013-01-01

    School districts across the country are charged with preparing the next generation for competing in a global economy and have spent billions of dollars on technology acquisition and Internet use. However, teachers do not feel prepared to integrate technology in the classroom. To prepare teachers for technology integration, the most common approach…

  12. 9 CFR 108.5 - Preparation of legends.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Preparation of legends. 108.5 Section... LICENSED ESTABLISHMENTS § 108.5 Preparation of legends. A brief description of the activities performed in each room or area shall be prepared as provided in this section and shall be referred to as a...

  13. Preparing for Remarriage: Anticipating the Issues, Seeking Solutions.

    Science.gov (United States)

    Ganong, Lawrence H.; Coleman, Marilyn

    1989-01-01

    Examined the ways remarried adults with children prepared for remarriage. Asked 100 men and 105 women about their methods of preparing, pre-remarriage concerns, and issues discussed prior to marriage. Primary way subjects prepared for remarriage was by cohabitation. Living together appeared to be more effective for men than for women. (Author/NB)

  14. 76 FR 78816 - Tax Return Preparer Penalties Under Section 6695

    Science.gov (United States)

    2011-12-20

    ... Internal Revenue Service 26 CFR Part 1 RIN 1545-BK16 Tax Return Preparer Penalties Under Section 6695... contains final regulations that modify existing regulations related to the tax return preparer penalties... and to improve compliance with the tax return preparer due diligence requirements of section...

  15. Encouraging Autonomy and Preparing for IELTS: Mutually Exclusive Goals?

    Science.gov (United States)

    Barrett-Lennard, Siri

    1997-01-01

    Suggests foreign students in Australia may not be getting preparation needed to integrate successfully into university study. Research is reviewed that indicates these students not only need help preparing for the International English Language Testing System (IELTS) but also with learning at an Australian university. Academic preparation courses…

  16. Absent Audiences: Youth Identity Formation in Preparations for Performance

    Science.gov (United States)

    Thompson, Carol C.

    2011-01-01

    This article explores the use of audiences in preparation for public presentation by an urban youth organization in Camden, New Jersey (U.S.). Camden is an impoverished city with few opportunities for youth. The organization, a hybrid of youth development, technology, business, and college preparation, prepared youth for good jobs or college.…

  17. Preparing for Remarriage: Anticipating the Issues, Seeking Solutions.

    Science.gov (United States)

    Ganong, Lawrence H.; Coleman, Marilyn

    1989-01-01

    Examined the ways remarried adults with children prepared for remarriage. Asked 100 men and 105 women about their methods of preparing, pre-remarriage concerns, and issues discussed prior to marriage. Primary way subjects prepared for remarriage was by cohabitation. Living together appeared to be more effective for men than for women. (Author/NB)

  18. Preparing Elementary Prospective Teachers to Teach Early Algebra

    Science.gov (United States)

    Hohensee, Charles

    2017-01-01

    Researchers have argued that integrating early algebra into elementary grades will better prepare students for algebra. However, currently little research exists to guide teacher preparation programs on how to prepare prospective elementary teachers to teach early algebra. This study examines the insights and challenges that prospective teachers…

  19. How do medical students prepare for flipped classrooms?

    NARCIS (Netherlands)

    Bouwmeester, RAM; de Kleijn, R.A.M.; ten Cate, TJ; van Rijen, HVM; Westerveld, HE

    A flipped classroom, an approach abandoning traditional lectures and having students come together to apply acquired knowledge, requires students to come to class well prepared. The nature of this preparation is currently being debated. Watching web lectures as a preparation has typically been

  20. Evaluation and optimisation of preparative semi-automated electrophoresis systems for Illumina library preparation.

    Science.gov (United States)

    Quail, Michael A; Gu, Yong; Swerdlow, Harold; Mayho, Matthew

    2012-12-01

    Size selection can be a critical step in preparation of next-generation sequencing libraries. Traditional methods employing gel electrophoresis lack reproducibility, are labour intensive, do not scale well and employ hazardous interchelating dyes. In a high-throughput setting, solid-phase reversible immobilisation beads are commonly used for size-selection, but result in quite a broad fragment size range. We have evaluated and optimised the use of two semi-automated preparative DNA electrophoresis systems, the Caliper Labchip XT and the Sage Science Pippin Prep, for size selection of Illumina sequencing libraries.

  1. PREPARATION, CHARACTERIZATION, AND PHARMACEUTICAL APPLICATION OF LINEAR DEXTRINS .1. PREPARATION AND CHARACTERIZATION OF AMYLODEXTRIN, METASTABLE AMYLODEXTRINS, AND METASTABLE AMYLOSE

    NARCIS (Netherlands)

    WIERIK, GHPT; EISSENS, AC; BESEMER, AC; LERK, CF

    The linear dextrin amylodextrin was prepared by enzymatic hydrolysis from waxy maize. Four metastable amylodextrins were prepared by complexation with different volatile organic compounds. All products showed partial dissolution into water at room temperature, because of dissolution of molecules

  2. Toxicity of ionic liquids prepared from biomaterials.

    Science.gov (United States)

    Gouveia, W; Jorge, T F; Martins, S; Meireles, M; Carolino, M; Cruz, C; Almeida, T V; Araújo, M E M

    2014-06-01

    In search of environmentally-friendly ionic liquids (ILs), 14 were prepared based on the imidazolium, pyridinium and choline cations, with bromide and several amino acids as anions. Good yields were obtained in the synthesis of pyridinium ILs and those prepared from choline and amino acids. Four of the ILs synthesized from choline and the amino acids arginine, glutamine, glutamic acid and cystine are described here for the first time. The toxicity of the synthesized ILs was checked against organisms of various levels of organization: the crustacean Artemia salina; Human cell HeLa (cervical carcinoma); and bacteria with different types of cell wall, Bacillus subtilis and Escherichia coli. The toxicity was observed to depend on both the cation and anion. Choline-amino acid ILs showed a remarkable low toxicity to A. salina and HeLa cell culture, ten times less than imidazolium and pyridinium ILs. None of ionic liquids exhibited marked toxicity to bacteria, and the effect was 2-3 orders of magnitude smaller than that of the antibiotic chloramphenicol. Copyright © 2013 Elsevier Ltd. All rights reserved.

  3. Going digital: image preparation for biomedical publishing.

    Science.gov (United States)

    Schenk, M P; Manning, R J; Paalman, M H

    1999-08-15

    Authors are more often being held responsible for readying their own data figures for digital publication by scanning them at the proper resolution and preparing them for presentation in both print and on-line journals. In this manner, the visuals can be printed at the highest quality the publisher can provide and be ready for rapid electronic distribution on the Internet. Therefore, authors must become knowledgeable in the visual preparation process in order to generate electronic images that will be as true a representation of the original image as possible. Perfecting this procedure can be a learning experience and often requires some experimentation. When accomplished, the author will have more control of exactly how the images will look before they are published. In addition to the scan resolution, the type of digital scanner and software applications used are very important, and instruction manuals should be followed closely so as to understand the full potential of the digitizing equipment. Anat Rec (New Anat): 257:128-136, 1999.

  4. Preparation and Properties of Cornstarch Adhesives

    Directory of Open Access Journals (Sweden)

    Li Yang

    2013-08-01

    Full Text Available The main goal of this study was to use cornstarch in the production of environmentally sound adhesives. ‘Three-formaldehyde glue’ pollutes the environment and harms to human health strongly, which widely used for wood-based panels preparation. Environment-friendly cornstarch adhesives were prepared using method of oxidation-gelatinization, insteading of the three formaldehyde glue. The effects of the quality ratio of starch and water, temperature and shear rate on the apparent viscosity of the adhesive were studied. The rheological eigenvalue of apparent viscosity was studied through nonlinear regression. The results showed that the apparent viscosity of cornstarch adhesives increased and then decreased with the increasing of temperature and the maximum value was obtained at 10oC; the apparent viscosity decreased slowly with the increasing of rotor speed; the phenomenon of shear thinning appeared wither cornstarch adhesives which was pseudo-plastic fluids. Cornstarch adhesives with characteristics of non-toxic, no smell and pollution could be applied in interior and upscale packaging.

  5. Preparation of biomimetic photoresponsive polymer springs.

    Science.gov (United States)

    Iamsaard, Supitchaya; Villemin, Elise; Lancia, Federico; Aβhoff, Sarah-Jane; Fletcher, Stephen P; Katsonis, Nathalie

    2016-10-01

    Polymer springs that twist under irradiation with light, in a manner that mimics how plant tendrils twist and turn under the effect of differential expansion in different sections of the plant, show potential for soft robotics and the development of artificial muscles. The soft springs prepared using this protocol are typically 1 mm wide, 50 μm thick and up to 10 cm long. They are made from liquid crystal polymer networks in which an azobenzene derivative is introduced covalently as a molecular photo-switch. The polymer network is prepared by irradiation of a twist cell filled with a mixture of shape-persistent liquid crystals, liquid crystals having reactive end groups, molecular photo-switches, some chiral dopant and a small amount of photoinitiator. After postcuring, the soft polymer film is removed and cut into springs, the geometry of which is determined by the angle of cut. The material composing the springs is characterized by optical microscopy, scanning electron microscopy and tensile strength measurements. The springs operate at ambient temperature, by mimicking the orthogonal contraction mechanism that is at the origin of plant coiling. They shape-shift under irradiation with UV light and can be pre-programmed to either wind or unwind, as encoded in their geometry. Once illumination is stopped, the springs return to their initial shape. Irradiation with visible light accelerates the shape reversion.

  6. Preparation of nanoporous titania spherical nanoparticles

    Science.gov (United States)

    Shiba, Kota; Sato, Soh; Matsushita, Takayuki; Ogawa, Makoto

    2013-03-01

    Preparation of nanoporous titania particles from well-defined titania-octadecylamine (titania-ODA) hybrid spherical particles with 450 nm in size, which were prepared by the method reported previously (Chem. Commun., 2009, pp. 6851-6853 [39]; RSC Adv., 2012, vol. 2, pp. 1343-1349 [40]), was studied. ODA was removed by solvent extraction with acidic ethanol to obtain nanoporous titania particles and subsequent calcination led to the formation of nanoporous titania particles with the nanopore size ranging from 2 to 4 nm depending on the calcination temperature. The as-synthesized titania was amorphous and was transformed into anatase (at around 300 °C) and rutile (at around 600 °C) by the heat treatment. The phase transition behavior was discussed in comparison with that of as-synthesized titania-ODA particles without ODA removal. Spherical particles of titania-ODA hybrids with 70 nm in size were also transformed into nanoporous titania particles composed of anatase crystallites by the washing and calcination at 500 °C for 1 h.

  7. Preparation and Characterization of Polypropylene / MWCNT Dispersions

    Science.gov (United States)

    Pujari, Saswati; Burghardt, Wesley; Ramanathan, Thillaiyan; Brinson, L. Catherine; Kasimatis, Kosmas; Torkelson, John

    2008-03-01

    Dispersions of multiwall carbon nanotubes in polypropylene are prepared via melt batch mixing and solid-state shear pulverization, and characterized via linear viscoelastic measurements, SEM, polypropylene crystallization kinetics, electrical conductivity and dynamic mechanical analysis. Increasing the intensity or duration of the melt mixing leads to higher dispersion, evidenced by increases in a low-frequency elastic plateau and accelerated PP crystallization kinetics attributed to more effective heterogeneous nucleation. The sample prepared by pulverization exhibits faster crystallization kinetics than any of the melt blended samples, but in contrast shows no measurable low frequency elastic plateau. Electrical conductivity measurements similarly show higher conductivity in melt blended samples. This may be attributable to scission of the nanotubes during pulverization, such that even well dispersed tubes cannot form an entangled network at a given concentration. At the same time, pulverized composites show marked increase in stiffness at low loadings, indicating that tube scission due to pulverization is not catastrophic. Conversely, long mixing times required in melt blending cause substantial thermal degradation of the polymer matrix with a corresponding loss of mechanical properties.

  8. Inorganic nanolayers: structure, preparation, and biomedical applications

    Science.gov (United States)

    Saifullah, Bullo; Hussein, Mohd Zobir B

    2015-01-01

    Hydrotalcite-like compounds are two-dimensional inorganic nanolayers also known as clay minerals or anionic clays or layered double hydroxides/layered hydroxy salts, and have emerged as a single type of material with numerous biomedical applications, such as drug delivery, gene delivery, cosmetics, and biosensing. Inorganic nanolayers are promising materials due to their fascinating properties, such as ease of preparation, ability to intercalate different type of anions (inorganic, organic, biomolecules, and even genes), high thermal stability, delivery of intercalated anions in a sustained manner, high biocompatibility, and easy biodegradation. Inorganic nanolayers have been the focus for researchers over the last decade, resulting in widening application horizons, especially in the field of biomedical science. These nanolayers have been widely applied in drug and gene delivery. They have also been applied in biosensing technology, and most recently in bioimaging science. The suitability of inorganic nanolayers for application in drug delivery, gene delivery, biosensing technology, and bioimaging science makes them ideal materials to be applied for theranostic purposes. In this paper, we review the structure, methods of preparation, and latest advances made by inorganic nanolayers in such biomedical applications as drug delivery, gene delivery, biosensing, and bioimaging. PMID:26366081

  9. Preparation and Characterization of Graphene Oxide

    Directory of Open Access Journals (Sweden)

    Jianguo Song

    2014-01-01

    Full Text Available Graphene oxide (GO films with two-dimensional structure were successfully prepared via the modified Hummer method. It is proven that redox method is a promising way to synthesize GO films on a large scale. Comprehensive characterizations of the properties of GO films were conducted. TEM and DFM analyses showed that GO sheets prepared in this study had single and double lamellar layer structure and a thickness of 2~3 nm. X-ray diffraction (XRD was selected to measure the crystal structure of GO sheet. Fourier-transform infrared spectra analyzer (FT-IR was used to certify the presence of oxygen-containing functional groups in GO films. The tests of UV-VIS spectrometer and TGA analyzer indicated that GO sheet possessed excellent optical response and outstanding thermal stability. Elemental analyzer (EA and X-ray photoelectron spectroscope (XPS analyzed the components synthetic material. Simultaneously, chemical structure of GO sheet was described in this study. Discussion and references for further research on graphene are provided.

  10. Preparation of the magnet sub-assemblies

    CERN Multimedia

    maximilien Brice

    2001-01-01

    Photo 01: On a rotation bench, preparation of the lower half-yoke with the bus bars and the pre-curved shell. The components are put on a dummy half-yoke in view of being rotated upside down. Photo 02: On a rotation bench, preparation of the lower half-yoke with the bus bars and the pre-curved shell. The components are put on a dummy half-yoke in view of being rotated upside down. Photo 03: The half-yoke assembly is made of short packs that are assembled together and locked with 15-m long tie-rods on a dedicated bench. Photo 04: The collared-coils assembly is equipped with magnetic inserts and special shims on a rotation bench in view of its installation in the yoke, operation that is called "yoking". At that stage of the assembly, the collared-coils assembly is equipped with the end plates and the electrical connections between the poles and between dipole I and dipoe II are made.

  11. Preparing to grasp emotionally laden stimuli.

    Directory of Open Access Journals (Sweden)

    Laura Alice Santos de Oliveira

    Full Text Available BACKGROUND: Contemporary theories of motor control propose that motor planning involves the prediction of the consequences of actions. These predictions include the associated costs as well as the rewarding nature of movements' outcomes. Within the estimation of these costs and rewards would lie the valence, that is, the pleasantness or unpleasantness of a given stimulus with which one is about to interact. The aim of this study was to test if motor preparation encompasses valence. METHODOLOGY/PRINCIPAL FINDINGS: The readiness potential, an electrophysiological marker of motor preparation, was recorded before the grasping of pleasant, neutral and unpleasant stimuli. Items used were balanced in weight and placed inside transparent cylinders to prompt a similar grip among trials. Compared with neutral stimuli, the grasping of pleasant stimuli was preceded by a readiness potential of lower amplitude, whereas that of unpleasant stimuli was associated with a readiness potential of higher amplitude. CONCLUSIONS/SIGNIFICANCE: We show for the first time that the sensorimotor cortex activity preceding the grasping of a stimulus is affected by its valence. Smaller readiness potential amplitudes found for pleasant stimuli could imply in the recruitment of pre-set motor repertoires, whereas higher amplitudes found for unpleasant stimuli would emerge from a discrepancy between the required action and their aversiveness. Our results indicate that the prediction of action outcomes encompasses an estimate of the valence of a stimulus with which one is about to interact.

  12. Preparing to Grasp Emotionally Laden Stimuli

    Science.gov (United States)

    de Oliveira, Laura Alice Santos; Imbiriba, Luís Aureliano; Russo, Maitê Mello; Nogueira-Campos, Anaelli A.; Rodrigues, Erika de C.; Pereira, Mirtes G.; Volchan, Eliane; Vargas, Cláudia Domingues

    2012-01-01

    Background Contemporary theories of motor control propose that motor planning involves the prediction of the consequences of actions. These predictions include the associated costs as well as the rewarding nature of movements’ outcomes. Within the estimation of these costs and rewards would lie the valence, that is, the pleasantness or unpleasantness of a given stimulus with which one is about to interact. The aim of this study was to test if motor preparation encompasses valence. Methodology/Principal Findings The readiness potential, an electrophysiological marker of motor preparation, was recorded before the grasping of pleasant, neutral and unpleasant stimuli. Items used were balanced in weight and placed inside transparent cylinders to prompt a similar grip among trials. Compared with neutral stimuli, the grasping of pleasant stimuli was preceded by a readiness potential of lower amplitude, whereas that of unpleasant stimuli was associated with a readiness potential of higher amplitude. Conclusions/Significance We show for the first time that the sensorimotor cortex activity preceding the grasping of a stimulus is affected by its valence. Smaller readiness potential amplitudes found for pleasant stimuli could imply in the recruitment of pre-set motor repertoires, whereas higher amplitudes found for unpleasant stimuli would emerge from a discrepancy between the required action and their aversiveness. Our results indicate that the prediction of action outcomes encompasses an estimate of the valence of a stimulus with which one is about to interact. PMID:23024811

  13. Ultrasonic Abrasion: An Alternative for Cavity Preparation

    Directory of Open Access Journals (Sweden)

    Áurea Simone Barrôso VIEIRA

    2007-05-01

    Full Text Available Introduction: Restorative dentistry aims to repair damages caused by caries disease. Along the years, researchers have developed effective and less invasive methods with the goal of preserving the teeth from caries destruction. Therefore, the improvement of scientific knowledge, auxiliary diagnostic systems, dental materials, and new instruments has changed the approaches and treatments in this field. In addition to conservative removal of carious tissue, patient’s comfort has also become a concern in modern dentistry.Purpose: Considering that ultrasonic abrasion has attracted great interest of dental professionals, this article discusses an alternative technique for cavity preparation by literature review, addressing its indications, contra-indications, advantages and limitations compared to the conventional high-speed method.Conclusion: There are not many studies on this subject. The available studies have demonstrated several qualities of the ultrasonic abrasion system, but some aspects remain unclear. Therefore, it is important to highlight that laboratorial and clinical studies in primary/permanent teeth should be conducted to elucidate questionable issues, such as time of cavity preparation, topography, presence of smear layer and microleakage, in order to offer safety to the extensive use of this new technology for both the professional and the patient. In this context, the dentist should always be attentive to innovations referring to minimally invasive techniques.

  14. Preparation and Characterization of Phycobiliprotein Mcirocapsule

    Directory of Open Access Journals (Sweden)

    Jiang Zheng

    2014-01-01

    Full Text Available Phycobiliprotein is a kind of bioactive material that is widely used in the fields of food and medicine. However, the usage of phycobiliprotein is limited by its instability. In this study, we firstly developed a kind of phycobiliprotein microcapsulate by chitosan-sodiumalginate encapsulation method. The preparation conditions, stability and controlled release of phycobiliprotein microcapsule were studied and discussed. The results showed that the optimal conditions for preparing the microcapsulates were 3% sodium alginate, 3% CaCl2 and 0.5% chitosan. After encapsulation, the stabilities of phycobiliprotein to heat, acidity and radiation were greatly improved. Phycobiliprotein in microcapsulate was 5-10 times more endurable than in water solution when heated and 7 times when radiated. Stability under acidity was also improved greatly. It was also found that phycobiliprotein microcapsulate had good stability in the mimic gastric juice and had 90% release rate in the mimic intestinal juice. This suggests that phycobiliprotein microcapsulate can have controlled release and dissolution in intestine.

  15. PSYCHOLOGICAL PREPARATION OF COMPETITIVE JUDOKAS - A REVIEW

    Directory of Open Access Journals (Sweden)

    Gal Ziv

    2013-09-01

    Full Text Available The purpose of this article was to review a series of studies (n = 18 on psychological preparation of competitive judokas. These studies were grouped according to the type of study performed - observational, experimental, and case studies. In addition, five psychological categories were identified: (a imagery, (b motivation, (c stress, anxiety, and mood states, (d eating attitudes and weight control, and (e coach/athlete interactions. The main findings of this review are that (a there is a lack of data regarding the use of imagery to improve judo performance; (b goal involvement states of competitive judokas fluctuate and undergo abrupt changes during actual combat, according to the ecological constraints of the situation; (c cortisol levels and somatic and cognitive anxiety tend to increase prior to and during a judo combat; (d weight reduction programs that judokas undergo prior to a judo combat can lead to unpleasant moods, and cultural differences can lead to conflicting results; (e psychological preparation plans should be tailored to each individual judoka, as there can be significant individual differences among the judokas. Based on the findings of our review, a number of research limitations and methodological concerns are discussed

  16. Inorganic nanolayers: structure, preparation, and biomedical applications.

    Science.gov (United States)

    Saifullah, Bullo; Hussein, Mohd Zobir B

    2015-01-01

    Hydrotalcite-like compounds are two-dimensional inorganic nanolayers also known as clay minerals or anionic clays or layered double hydroxides/layered hydroxy salts, and have emerged as a single type of material with numerous biomedical applications, such as drug delivery, gene delivery, cosmetics, and biosensing. Inorganic nanolayers are promising materials due to their fascinating properties, such as ease of preparation, ability to intercalate different type of anions (inorganic, organic, biomolecules, and even genes), high thermal stability, delivery of intercalated anions in a sustained manner, high biocompatibility, and easy biodegradation. Inorganic nanolayers have been the focus for researchers over the last decade, resulting in widening application horizons, especially in the field of biomedical science. These nanolayers have been widely applied in drug and gene delivery. They have also been applied in biosensing technology, and most recently in bioimaging science. The suitability of inorganic nanolayers for application in drug delivery, gene delivery, biosensing technology, and bioimaging science makes them ideal materials to be applied for theranostic purposes. In this paper, we review the structure, methods of preparation, and latest advances made by inorganic nanolayers in such biomedical applications as drug delivery, gene delivery, biosensing, and bioimaging.

  17. An automatic tooth preparation technique: A preliminary study

    Science.gov (United States)

    Yuan, Fusong; Wang, Yong; Zhang, Yaopeng; Sun, Yuchun; Wang, Dangxiao; Lyu, Peijun

    2016-04-01

    The aim of this study is to validate the feasibility and accuracy of a new automatic tooth preparation technique in dental healthcare. An automatic tooth preparation robotic device with three-dimensional motion planning software was developed, which controlled an ultra-short pulse laser (USPL) beam (wavelength 1,064 nm, pulse width 15 ps, output power 30 W, and repeat frequency rate 100 kHz) to complete the tooth preparation process. A total of 15 freshly extracted human intact first molars were collected and fixed into a phantom head, and the target preparation shapes of these molars were designed using customised computer-aided design (CAD) software. The accuracy of tooth preparation was evaluated using the Geomagic Studio and Imageware software, and the preparing time of each tooth was recorded. Compared with the target preparation shape, the average shape error of the 15 prepared molars was 0.05–0.17 mm, the preparation depth error of the occlusal surface was approximately 0.097 mm, and the error of the convergence angle was approximately 1.0°. The average preparation time was 17 minutes. These results validated the accuracy and feasibility of the automatic tooth preparation technique.

  18. Pathways for Preparation: Locating Suicide Education in Preparing Professionals for Encounters with Suicidal Adolescents

    Science.gov (United States)

    Ranahan, Patti

    2013-01-01

    Current suicide prevention strategies often include suicide education based on the premise that education can lead to recognition of those at risk of suicide and others who are prepared can respond and potentially save lives. As suicide is a leading cause of death for young people, it is relevant to explore how suicide education is made available…

  19. Teacher Preparation: Assessing Teacher Quality, Administrative Support, Standards-Based Teacher Preparation.

    Science.gov (United States)

    Poliakoff, Anne Rogers, Ed.

    2002-01-01

    This collection of papers focuses on the preparation of teachers by university-based education programs. The papers are: "The STEPS That Support P-12 Learning and Achievement" (Diana Rigden), which describes the Standards-based Teacher Education Project (STEP) for improving student learning; "The Responsibility for Assessing Beginning Teachers"…

  20. Preparing the Workforce: Early Childhood Teacher Preparation at 2- and 4-year Institutions of Higher Education.

    Science.gov (United States)

    Early, Diane M.; Winton, Pamela J.

    2001-01-01

    Details investigation of characteristics of early childhood teacher preparation programs at 2- and 4-year institutions through a survey of program chairs or directors. Presents findings on faculty characteristics, including racial makeup; course and practica requirements; comparisons between early childhood programs and the institutions as whole…

  1. [Evaluation of the potential mutagenic action of canned fish in oil prepared with Vakhtol' curing preparation].

    Science.gov (United States)

    Karpliuk, I A; Volkova, N A; Gogol', A T

    1980-01-01

    Bone marrow cells from CBA mice who had been given sprats cooked by means of the smoking preparation "Vakhtol" or by smoking over a month were subjected to cytogenetic analysis during the metaphase. No mutagenic changes were found in bone marrow cells.

  2. The Abacus: Teachers' Preparation and Beliefs about Their Abacus Preservice Preparation

    Science.gov (United States)

    Rosenblum, L. Penny; Hong, Sunggye; Amato, Sheila

    2013-01-01

    Introduction: This article reports on a study of 196 teachers who shared their experiences and opinions related to how they were taught to use the Cranmer abacus. Methods: In February and March 2012, the participants completed an online survey to gather information about their preparation in using and beliefs about computation with the Cranmer…

  3. Preparing Youth for the 21st Century Knowledge Economy: Youth Programs and Workforce Preparation

    Science.gov (United States)

    Cochran, Graham R.; Ferrari, Theresa M.

    2009-01-01

    In the 21st century, the idea of preparing youth for the workforce has taken on new meaning. The shift to a knowledge economy has brought widespread concern that young people are entering the workforce without the skills employers value most, such as communication, critical thinking, leadership, and teamwork skills. As youth programs evaluate how…

  4. Behavior and Classroom Management: Are Teacher Preparation Programs Really Preparing Our Teachers?

    Science.gov (United States)

    Flower, Andrea; McKenna, John William; Haring, Christa D.

    2017-01-01

    Research suggests that many teachers are underprepared for the behaviors that their students may bring to the classroom, resulting in challenges to teaching and learning. The purpose of this study was to examine the behavior management content included in preservice teacher preparation programs for general education and special education teachers.…

  5. Preparing Scientists to be Community Partners

    Science.gov (United States)

    Pandya, R. E.

    2012-12-01

    Many students, especially students from historically under-represented communities, leave science majors or avoid choosing them because scientific careers do not offer enough opportunity to contribute to their communities. Citizen science, or public participation in scientific research, may address these challenges. At its most collaborative, it means inviting communities to partner in every step of the scientific process from defining the research question to applying the results to community priorities. In addition to attracting and retaining students, this level of community engagement will help diversify science, ensure the use and usability of our science, help buttress public support of science, and encourage the application of scientific results to policy. It also offers opportunities to tackle scientific questions that can't be accomplished in other way and it is demonstrably effective at helping people learn scientific concepts and methods. In order to learn how to prepare scientists for this kind of intensive community collaboration, we examined several case studies, including a project on disease and public health in Africa and the professionally evaluated experience of two summer interns in Southern Louisiana. In these and other cases, we learned that scientific expertise in a discipline has to be accompanied by a reservoir of humility and respect for other ways of knowing, the ability to work collaboratively with a broad range of disciplines and people, patience and enough career stability to allow that patience, and a willingness to adapt research to a broader set of scientific and non-scientific priorities. To help students achieve this, we found that direct instruction in participatory methods, mentoring by community members and scientists with participatory experience, in-depth training on scientific ethics and communication, explicit articulation of the goal of working with communities, and ample opportunity for personal reflection were essential

  6. Kit preparation of radioiodinated o-iodohippuran

    Energy Technology Data Exchange (ETDEWEB)

    Hinkle, G.H.; Basmadjian, G.P.; Kirschner, A.S.; Ice, R.D.

    1981-03-01

    The purpose of this study was to evaluate a kit preparation for radioiodinated o-iodohippuran (I). All ingredients, excluding the radionuclide, were packaged in a ready-to-use kit for easy, quick formulation. Electrophoresis was utilized to evaluate the radiochemical purity of the labeled product and indicated that the radiolabeling technique provided a product with greater than 95% radiochemical purity. Biodistribution studies in rats and rabbits provided an indication of the tissue distribution and localization of the radiopharmaceutical. Computer-generated renogram curves plotted from gamma-camera images of rabbits showed the equivalency of the 131I-labeled I and 123I-labeled I to the commercially available radiopharmaceutical.

  7. Preparation of Radiopharmaceuticals Labeled with Metal Radionuclides

    Energy Technology Data Exchange (ETDEWEB)

    Welch, M.J.

    2012-02-16

    The overall goal of this project was to develop methods for the production of metal-based radionuclides, to develop metal-based radiopharmaceuticals and in a limited number of cases, to translate these agents to the clinical situation. Initial work concentrated on the application of the radionuclides of Cu, Cu-60, Cu-61 and Cu-64, as well as application of Ga-68 radiopharmaceuticals. Initially Cu-64 was produced at the Missouri University Research Reactor and experiments carried out at Washington University. A limited number of studies were carried out utilizing Cu-62, a generator produced radionuclide produced by Mallinckrodt Inc. (now Covidien). In these studies, copper-62-labeled pyruvaldehyde Bis(N{sup 4}-methylthiosemicarbazonato)-copper(II) was studied as an agent for cerebral myocardial perfusion. A remote system for the production of this radiopharmaceutical was developed and a limited number of patient studies carried out with this agent. Various other copper radiopharmaceuticals were investigated, these included copper labeled blood imaging agents as well as Cu-64 labeled antibodies. Cu-64 labeled antibodies targeting colon cancer were translated to the human situation. Cu-64 was also used to label peptides (Cu-64 octriatide) and this is one of the first applications of a peptide radiolabeled with a positron emitting metal radionuclide. Investigations were then pursued on the preparation of the copper radionuclides on a small biomedical cyclotron. A system for the production of high specific activity Cu-64 was developed and initially the Cu-64 was utilized to study the hypoxic imaging agent Cu-64 ATSM. Utilizing the same target system, other positron emitting metal radionuclides were produced, these were Y-86 and Ga-66. Radiopharmaceuticals were labeled utilizing both of these radionuclides. Many studies were carried out in animal models on the uptake of Cu-ATSM in hypoxic tissue. The hypothesis is that Cu-ATSM retention in vivo is dependent upon the

  8. Preparation of Metallic Isotope 26Mg

    Institute of Scientific and Technical Information of China (English)

    WuXiaolei; ZhangFuming; GanZaiguo; GuoJunsheng; QinZhi

    2003-01-01

    Some special isotope material is usually used in nuclear experiments. It can be served as ion beam or target. When new superheavy nuclide 265Bh (Z=107) is synthesized, a reaction of 243Am target with 26Mg ion beamis selected to produce new isotope 265Bh. The preparation and production of this rare and extremely expensive isotope 26 Mg used for ion beam substance will be a key problem in synthesizing experiment of 265Bh. Theavailable chemical form of isotope 26Mg in commercial product usually is oxide or other compound, which are not required in our experiment. They need to be transformed to metal form as a proper working substance in ion source.

  9. Process for the preparation of calcium superoxide

    Science.gov (United States)

    Ballou, E. V.; Wood, P. C.; Wydeven, T. J.; Spitze, L. A. (Inventor)

    1978-01-01

    Calcium superoxide is prepared in high yields by spreading a quantity of calcium peroxide diperoxyhydrate on the surface of a container, positioning said container in a vacuum chamber on a support structure through which a coolant fluid can be circulated, partially evacuating said vacuum chamber, allowing the temperature of the diperoxyhydrate to reach the range of about 0 to about 40 C; maintaining the temperature selected for a period of time sufficient to complete the disproproriation of the diperoxyhydrate to calcium superoxide, calcium hydroxide, oxygen, and water; constantly and systematically removing the water as it is formed by sweeping the reacting material with a current of dry inert gas and/or by condensation of said water on a cold surface; backfilling the chamber with a dry inert gas; and finally, recovering the calcium superoxide produced.

  10. Preparation and Application of Microencapsulated Disperse Dyes

    Institute of Scientific and Technical Information of China (English)

    罗艳; 陈水林

    2001-01-01

    Microcapsules containing disperse dyes were prepared by means of in-situ polymerization. Polyester fabrics were multiple-transfer printed and color-mix printed using those microencapsulated dyes under different process conditions. By color measurement instrument, it can be seen that the times of multiple-transfer printing are up to ten while under appropriate conditions, especially when the transfer printing time is 50 seconds and the transfer printing temperature is 180°C. On the other hand, the K/S value of each transfer printing can keep almost constant. Meanwhile, the visual effect of color- mix printing with microencapsulated disperse dyes is special in the varicolored exhibiting if compared with conventional disperse dyes.

  11. Preparation of titanium/aluminum alloys

    Energy Technology Data Exchange (ETDEWEB)

    Jecker, G.

    1984-03-20

    Alloys comprising titanium and aluminum, or titanium, aluminum and at least one of the metals M, wherein M is vanadium, zirconium, chromium, niobium, tantalum and/or iron, are facilely prepared by reducing an alkali metal fluotitanate, or coreducing admixture of an alkali metal fluotitanate and at least one halide of a metal M, with aluminum, in the presence of an alkali metal oxide reactive flux, either Na/sub 2/O and/or K/sub 2/O; next solubilizing with water the fluorine compounds of reduction/coreduction which are in admixture of reduction/coreduction with dispersion of the aforesaid metals in metallic state; separating said dispersion of metals in metallic state from said admixture of reduction/coreduction; and then alloying by melting and cooling said separated dispersion of metals in metallic state.

  12. Electrospinning preparation and characterization of polyoxometalate fibers

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Poly(vinyl alcohol)/K7[SiW11O39Co(H3P2- O7)] hybrid fine fiber mats (PVA/SiW11Co-P2O7) were prepared through electrospinning technique. After calcinations of PVA/SiW11Co-P2O7 at 500℃ for 8 h, pure SiW11Co-P2O7 fine fibers were obtained with the Keggin structure keeping unchanged. The fiber mats were characterized by IR, ESR, PXRD and scanning electron microscopy (SEM) methods. The average diameter of the fibers is about 250 nm. The SiW11Co- P2O7 fibers showed color change when absorbing and desorbing moisture.

  13. Preparation of PFS coagulant by sectionalized reactor

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The oxidation rate of ferrous sulfate is investigated for the preparation of polyferric sulfate(PFS) coagulant.It is proved that this reaction is zero order with respect to Fe2 +,first order with respect to NO2 (g),and first order with respect to the interface area between gas phase and liquid phase.According to this mechanism,sectionalized reactor(SR) is used in place of traditional reactor(TR),and the liquid of reaction mixture is recycled by pump.As a result,not only the flow path of reaction liquid is prolonged,but also gas-liquid contact area enlarged,and the reaction distinctly accelerated,compared with traditional reactor.The effects of parameters including temperature,acidity and others on the reaction rate are also discussed.

  14. Preparation and characterization of calcium phosphate biomaterials.

    Science.gov (United States)

    Calafiori, A R; Di Marco, G; Martino, G; Marotta, M

    2007-12-01

    Calcium phosphate cement (CPC) samples have been prepared with a mixture of monocalciumphosphate monohydrate (MCPM) and calcium carbonate (CC) powders, in stechiometric moles ratio 1:2.5 to obtain a Ca/P ratio of about 1.67 typical of hydroxyapatite (HAp), with or without addition of HAp. All specimens are incubated at 30 degrees C in a steam saturated air environment for 3, 6 and 15 days respectively, afterwards dried and stored under nitrogen. The calcium phosphate samples have been characterized by X-ray diffraction (XRD), Vickers hardness test (HV), diametral compression (d.c.), strength compression, and porosity evaluation. MCPM/CC mixture has a 30% HAp final concentration and is characterized by higher porosity (amount 78%) and mechanical properties useful as filler in bone segments without high mechanical stress.

  15. Preparing for lifelong e-learning

    DEFF Research Database (Denmark)

    Andresen, Bent B.

    2010-01-01

    -motivated learning strategy foster personal development, social inclusion, and employability. One spinoff is an increased desire to learn more about the use of digital technologies. Another is an increased desire to learn in general. This approach to digital literacy for adults thus stimulates to and prepares......In this paper, the author examines digital inclusion. The use of interactive tools to locate, make meaning of, and produce digital content in workplace contexts and broader social contexts are analysed based on a definition of inclusion related to social practices. The general scope of the paper...... is lifelong learning. Since information and communication technologies offer new opportunities to adult learners, digital inclusion is considered an important prerequisite for lifelong learning. In the paper, the author presents one strategy for removing barriers to lifelong learning caused by lack...

  16. Preparation and evaluation of antisera to oxytocin

    Energy Technology Data Exchange (ETDEWEB)

    Fingerova, H.; Slaninova, J. (Palackeho Univ., Olomouc (Czechoslovakia). Lekarska Fakulta); Janouskova, M.; Talas, M. (Ceskoslovenska Akademie Ved, Prague. Ustav Organicke Chemie a Biochemie)

    1981-01-01

    In co-operation with the Institute of Organic Chemistry and Biochemistry of the Czechoslovak Academy of Sciences in Prague we attempted to prepare a specific oxytocin antibody. 9 rabbits were immunized using an oxytocin and thyreoglobulin conjugate in two dosages. Only two rabbits responded by sufficient antibody production to the first immunization by intradermal injections. The second immunization was only performed in the said two rabbits, thus obtaining higher titer antisera. In preliminary experiments, in the first sampling in rabbit No.8 cross-reaction was tested with 8-arginine-vasopressin. It was found to be negligible. The standard oxytocin curve was found sensitive within 8 to 1000 pg/tube. The experiments carried out so far show good prospects of introducing sensitive and specific radioimmunological determination of oxytocin using noncommercial substances.

  17. Preparation and integration of nanostructured titanium dioxide

    KAUST Repository

    Zeng, Hua Chun

    2011-10-01

    Titanium dioxide (TiO2) is a chemically stable nontoxic transition-metal oxide associated with a wide range of existing chemical engineering processes. In this short review, recent research endeavors in preparation and integration of nanostructured TiO2 materials system will be featured and discussed for their potential new applications. Because material development always plays pivotal roles in the progress of a particular engineering discipline, the reviewed subjects will provide useful information to stimulate nanoscale research of chemical engineering, linking established fundamentals with practical applications. Some critical issues and challenges regarding further development of this important functional material for nanotechnology will also be addressed. © 2011 Elsevier Ltd. All rights reserved.

  18. Preparation of High Purity Amorphous Boron Powder

    Directory of Open Access Journals (Sweden)

    K.V. Tilekar

    2005-10-01

    Full Text Available Amorphous boron powder of high purity (92-94 % with a particle size of l-2 mm is preferred as a fuel for fuel-rich propellants for integrated rocket ramjets and for igniter formulations. Thispaper describes the studies on process optimisation of two processes, ie, oxidative roasting of boron (roasting boron in air and roasting boron with zinc in an inert medium for preparing high purity boron. Experimental studies reveal that roasting boron with zinc at optimised process conditions yields boron of purity more than 93 per cent, whereas oxidative roasting method yields boron of purity - 92 per cent. Oxidative roasting has comparative edge over the other processes owing to its ease of scale-up and simplicity

  19. Source preparations for alpha and beta measurements

    Energy Technology Data Exchange (ETDEWEB)

    Holm, E. [Risoe National Lab., Roskilde (Denmark)

    2001-01-01

    Regarding alpha particle emitters subject for environmental studies, electrodeposition or co-precipitation as fluorides are the most common methods. For electro deposition stainless steel is generally used as cathode material but also other metals such as Ni, Ag, and Cu showed promising results. The use of other anode material than platinum, such as graphite should be investigated. For other purposes such as optimal resolution other more sophisticated methods are used but often resulting in poorer recovery. For beta particle emitters the type of detection system will decide the source preparation. Similar methods as for alpha particle emitters, electrodeposition or precipitation techniques can be used. Due to the continuous energy distribution of the beta pulse height distribution a high resolution is not required. Thicker sources from the precipitates or a stable isotopic carrier can be accepted but correction for absorption in the source must be done. (au)

  20. Teacher preparation in a constructivist context

    Directory of Open Access Journals (Sweden)

    Rafael Porlán

    2002-09-01

    Full Text Available Teacher change is a major variable in school change. Such a change depends on external and contextual factors (aspects of the teaching position, labor conditions, administrative and organizational conditions, etc. as well as on internal factors related to professional knowledge. In addition, both kind of factors are interdependent and mutually influencing and reinforcing. That is, there will be no generalized change among teachers until their labor conditions are changed, however, this change alone will not guarantee an innovative evolution in their professional practices. Having this in mind, our reserach program has the main of goal the construction of a more rigorous knowledge on teachers' professional knowledge and teacher preparation models that facilitate its evolution.