WorldWideScience

Sample records for preloading produced dose-related

  1. Flumazenil-sensitive dose-related physical dependence in planarians produced by two benzodiazepine and one non-benzodiazepine benzodiazepine-receptor agonists.

    Science.gov (United States)

    Raffa, Robert B; Cavallo, Federica; Capasso, Anna

    2007-06-14

    Two benzodiazepine (midazolam and clorazepate) and one non-benzodiazepine (zolpidem) benzodiazepine-receptor agonists produced dose-related physical dependence, as evidenced by abstinence-induced decrease in planarian locomotor velocity (pLMV) when drug-exposed planarians were placed into drug-free water, but not when they were placed into drug-containing water (i.e., an abstinence-induced withdrawal, since the effect was only obtained in the removal of drug and not in the continued presence of drug). We have previously shown that the decrease in pLMV is associated with specific and transient withdrawal signs. In the present study, the selective benzodiazepine-receptor antagonist flumazenil significantly antagonized (Pbenzodiazepine-receptor agonists, for two different chemical categories, produce dose-related physical dependence manifested as abstinence-induced withdrawal in this simple and convenient model, and (2) in the absence of cloning or radioligand binding literature, suggest a possible specific interaction site (receptor?) for these compounds in planarians.

  2. Preloaded Motorway Embankments

    DEFF Research Database (Denmark)

    Steenfelt, J. S.; Jørgensen, Mogens B.; Jørgensen, P. O.

    1999-01-01

    Road construction, particularly involving soft soil replacement, draws very heavily on the scarce resources of sand and gravel. One environmentally appealing alternative to complete soft soil replacement is preloading where the sand/gravel materials may be re-used along the road alignment...

  3. Preloaded Motorway Embankments

    DEFF Research Database (Denmark)

    Steenfelt, Jørgen S.; Jørgensen, Mogens B.; Jørgensen, P.O.

    Road construction, particularly involving soft soil replacement, draws very heavily on the scarce resources of sand and gravel. One environmentally appealing alternative to complete soft soil replacement is pre-loading where the sand/gravel materials may be re-used along the road alignment...

  4. Monitoring preload performance

    Energy Technology Data Exchange (ETDEWEB)

    Russell, J.B.; Lawrence, C.A.; Paddock, M.W.; Ross, D.

    1999-07-01

    Reconstruction of State Highway 29 (STH 29) in north central Wisconsin was complicated by two separate deposits of compressible peat and organic silt within the highway right-of-way. The deposits ranged from about 3 to 11 meters in thickness over about 900 meters of the reconstruction alignment. Excavation and removal of the peat and organic silt was evaluated, but was determined to be cost prohibitive. Preloading was determined to be a cost effective and environmentally friendly solution, and was implemented at both deposits to induce the expected consolidation and long-term secondary compression of the final highway embankment and pavement sections. This paper presents the design, instrumentation, and rheological modeling procedures used to complete the project.

  5. DLC screw preload. Loosening prevention

    Directory of Open Access Journals (Sweden)

    Ivete Aparecida de Mattias Sartori

    2008-01-01

    Full Text Available The screw loosening is a reason to prosthetic rehabilitation failure. However, the DLC (Diamond-like carbon screw treatment lead thefriction decrease and sliding between the components, which increases the screw preload benefit and decreases the chance of looseningoccurrence. This case shows a clinical indication of the association of the correct preload applied and the DLC screw, which can be considered an optimized protocol to solve screw loosening recidivate of unitary prosthesis in anterior maxillary site.

  6. In vitro axial preload application during spine flexibility testing: towards reduced apparatus-related artefacts.

    Science.gov (United States)

    Cripton, P A; Bruehlmann, S B; Orr, T E; Oxland, T R; Nolte, L P

    2000-12-01

    Presently, there is little consensus about how, or even if, axial preload should be incorporated in spine flexibility tests in order to simulate the compressive loads naturally present in vivo. Some preload application methods are suspected of producing unwanted "artefact" forces as the specimen rotates and, in doing so, influencing the resulting kinematics. The objective of this study was to quantitatively compare four distinct types of preload which have roots in contemporary experimental practice. The specific quantities compared were the reaction moments and forces resulting at the intervertebral disc and specimen kinematics. The preload types incorporated increasing amounts of caudal constraint on the preload application vector ranging from an unconstrained dead-load arrangement to an apparatus that allowed the vector to follow rotations of the specimen. Six human cadaveric spine segments were tested (1-L1/L2, 3-L2/L3, 1-L3/L4 and 1-L4/L5). Pure moments were applied to the specimens with each of the four different types of compressive preload. Kinematic response was measured using an opto-electronic motion analysis system. A six-axis load cell was used to measure reaction forces and moments. Artefact reaction moments and shear forces were significantly affected by preload application method and magnitude. Unconstrained preload methods produced high artefact moments and low artefact shear forces while more constrained methods did the opposite. A mechanical trade-off is suggested by our results, whereby unwanted moment can only be prevented at the cost of shear force production. When comparing spine flexibility studies, caution should be exercised to ensure preload was applied in a similar manner for all studies. Unwanted moments or forces induced as a result of preload application method may render the comparison of two seemingly similar studies inappropriate.

  7. Neural responses to the mechanical parameters of a high velocity, low amplitude spinal manipulation: effect of preload parameters

    Science.gov (United States)

    Reed, William. R.; Long, Cynthia R.; Kawchuk, Gregory N.; Pickar, Joel G.

    2014-01-01

    Objective The purpose of this study was to determine how the preload that precedes a high velocity low amplitude spinal manipulation (HVLA-SM) affects muscle spindle input from lumbar paraspinal muscles both during and after the HVLA-SM. Methods Primary afferent activity from muscle spindles in lumbar paraspinal muscles were recorded from the L6 dorsal root in anesthetized cats. HVLA-SM of the L6 vertebra was preceded either by no preload or by systematic changes in the preload magnitude, duration, and the presence or absence of a downward incisural point (DIP). Immediate effects of preload on muscle spindle responses to the HVLA-SM were determined by comparing mean instantaneous discharge frequencies (MIF) during the HVLA-SM’s thrust phase with baseline. Longer lasting effects of preload on spindle responses to the HVLA-SM were determined by comparing MIF during slow ramp and hold movement of the L6 vertebra before and following the HVLA-SM. Results The smaller compared to the larger preload magnitude and the longer compared to the shorter preload duration significantly increased (P=0.02 and P=0.04) respectively) muscle spindle responses during the HVLA-SM thrust. The absence of preload had the greatest effect on the change in MIF. Interactions between preload magnitude, duration and DIP often produced statistically significant but arguably physiologically modest changes in the passive signaling properties of the muscle spindle following the manipulation. Conclusion Because preload parameters in this animal model were shown to affect neural responses to an HVLA-SM, preload characteristics should be taken into consideration when judging this intervention’s therapeutic benefit in both clinical efficacy studies and in clinical practice. PMID:24387888

  8. Calorie anticipation alters food intake after low-caloric not high-caloric preloads.

    Science.gov (United States)

    Hogenkamp, P S; Cedernaes, J; Chapman, C D; Vogel, H; Hjorth, O C; Zarei, S; Lundberg, L S; Brooks, S J; Dickson, S L; Benedict, C; Schiöth, H B

    2013-08-01

    Cognitive factors and anticipation are known to influence food intake. The current study examined the effect of anticipation and actual consumption of food on hormone (ghrelin, cortisol, and insulin) and glucose levels, appetite and ad libitum intake, to assess whether changes in hormone levels might explain the predicted differences in subsequent food intake. During four breakfast sessions, participants consumed a yogurt preload that was either low caloric (LC: 180 kcal/300 g) or high caloric (HC: 530 kcal/300 g) and was provided with either consistent or inconsistent calorie information (i.e., stating the caloric content of the preload was low or high). Appetite ratings and hormone and glucose levels were measured at baseline (t = 0), after providing the calorie information about the preload (t = 20), after consumption of the preload (t = 40), and just before ad libitum intake (t = 60). Ad libitum intake was lower after HC preloads (as compared to LC preloads; P Intake after LC preloads was higher when provided with (consistent) LC information (467±254 kcal) as compared to (inconsistent) HC information (346±210 kcal), but intake after the HC preloads did not depend on the information provided (LC information: 290±178 kcal, HC information: 333±179 kcal; caloric load*information P = 0.03). Hormone levels did not respond in an anticipatory manner, and the post-prandial responses depended on actual calories consumed. These results suggest that both cognitive and physiological information determine food intake. When actual caloric intake was sufficient to produce physiological satiety, cognitive factors played no role; however, when physiological satiety was limited, cognitively induced satiety reduced intake to comparable levels. Copyright © 2012 The Obesity Society.

  9. Preloading of bolted connections in nuclear reactor component supports

    Energy Technology Data Exchange (ETDEWEB)

    Yahr, G T

    1984-10-01

    A number of failures of threaded fasteners in nuclear reactor component supports have been reported. Many of those failures were attributed to stress corrosion cracking. This report discusses how stress corrosion cracking can be avoided in bolting by controlling the maximum bolt preloads so that the sustained stresses in the bolts are below the level required to cause stress corrosion cracking. This is a basic departure from ordinary bolted joint design where the only limits on preload are on the minimum preload. Emphasis is placed on the importance of detailed analysis to determine the acceptable range of preload and the selection of a method for measuring the preload that is sufficiently accurate to ensure that the preload is actually within the acceptable range. Procedures for determining acceptable preload range are given, and the accuracy of various methods of measuring preload is discussed.

  10. Effect of a preload force on anchor system frequency

    Institute of Scientific and Technical Information of China (English)

    Lu Aihong; Xu Jinhai; Liu Haishun

    2013-01-01

    The interrelationship between preload forces and natural frequencies of anchors was obtained from the structure of an anchor and its mechanical characteristics.We established a numerical model for the dynamic analysis of a bolt support system taking into consideration the working surroundings of the anchor.The natural frequency distribution of the system under various preload forces of the anchor was analyzed with ANSYS.Our results show that each order of the system frequency varied with an increase in preload forces.A single order frequency decreased with an increase in the preload force.A preload force affected low-order frequencies more than high-order frequencies.We obtained a functional relationship by fitting preload forces and fundamental frequencies,which was in agreement with our theoretical considerations.This study provides theoretical support for the detection of preload forces.

  11. Gasification of Nickel-Preloaded Oil Palm Biomass with Air

    Directory of Open Access Journals (Sweden)

    Syed Shatir A. Syed-Hassan

    2016-10-01

    Full Text Available This study experimentally investigates the gasification of nickel-preloaded oil palm biomass as an alternative catalytic approach to produce clean syngas. To eliminate the use of catalyst support, nickel was added directly to the oil palm mesocarp fiber via ion-exchange using an aqueous solution of nickel nitrate. Nickel species was found to disperse very well on the biomass at a nano-scale dispersion. The presence of the finely dispersed nickels on biomass enhanced syngas production and reduced tar content in the producer gas during the air gasification of biomass. It is believed that nickel particles attached on the biomass and its char promote the catalytic cracking of tar on their surface and supply free radicals to the gas phase to enhance the radical-driven gas-phase reactions for the reforming of high molecular weight hydrocarbons. The unconsumed nickel-containing char shows great potential to be re-utilised as a catalyst to further enhance the destruction of tar components in the secondary tar reduction process. Copyright © 2016 BCREC GROUP. All rights reserved Received: 12nd September 2015; Revised: 10th January 2016; Accepted:16th January 2016 How to Cite: Syed-Hassan, S.S.A., Nor-Azemi, S. (2016. Gasification of Nickel-Preloaded Oil Palm Biomass with Air. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (3: 262-272 (doi:10.9767/bcrec.11.3.566.262-272 Permalink/DOI: http://doi.org/10.9767/bcrec.11.3.566.262-272

  12. Experimental study on bearing preload optimum of machine tool spindle

    Science.gov (United States)

    Xu, Tao; Xu, Guanghua; Zhang, Qin; Hua, Cheng; Zhang, Hu; Jiang, Kuosheng

    2012-05-01

    An experimental study is conducted to investigate the possibility and the effect of temperature rise and vibration level of bearing by adjusting axial preloads and radial loads in spindle bearing test rig. The shaft of the test rig is driven by a motorized high speed spindle at the range of 0~20000 rpm. The axial preloads and radial loads on bearings are controlled by using hydraulic pressure which can be adjusted automatically. Temperature rise and radial vibration of test bearings are measured by thermocouples and Polytec portable laser vibrometer PDV100. Experiment shows that the temperature rise of bearings is nonlinear varying with the increase of radial loads, but temperature rise almost increases linearly with the increase of axial preload and rotating speed. In this paper, an alternate axial preload is used for bearings. When the rotating speed passes through the critical speed of the shaft, axial preload of bearings will have a remarkable effect. The low preload could reduce bearing vibration and temperature rise for bearings as well. At the others speed, the high preload could improve the vibration performance of high speed spindle and the bearing temperature was lower than that of the constant pressure preload spindle.

  13. Investigation of multiple spindle characteristics under non-uniform bearing preload

    Directory of Open Access Journals (Sweden)

    Yanfei Zhang

    2016-02-01

    Full Text Available The non-uniform distribution load during machining and assembly process is crucial for spindle system, especially in complex working conditions. The conception of non-uniform preload adjustment approach was proposed and experimentally investigated in this article. Based on the mechanical equivalent principle, the non-uniform preload was theoretically transformed to the combination of uniform preload and an extra moment. Then, the non-uniform preload of rolling bearing was experimentally measured and analyzed via a spacer with 15-µm wear loss on the end face. The spindle performance factors, such as rotation accuracy, temperature rising, acceleration, and vibration, were all monitored. The rotation center of spindle was deviated in different non-uniform preload conditions. Meanwhile, the temperature and vibration performance of non-uniform preload are superior to those of uniform bearing preload.

  14. Effect of compressive follower preload on the flexion-extension response of the human lumbar spine.

    Science.gov (United States)

    Patwardhan, Avinash G; Havey, Robert M; Carandang, Gerard; Simonds, James; Voronov, Leonard I; Ghanayem, Alexander J; Meade, Kevin P; Gavin, Thomas M; Paxinos, Odysseas

    2003-05-01

    Traditional experimental methods are unable to study the kinematics of whole lumbar spine specimens under physiologic compressive preloads because the spine without active musculature buckles under just 120 N of vertical load. However, the lumbar spine can support a compressive load of physiologic magnitude (up to 1200 N) without collapsing if the load is applied along a follower load path. This study tested the hypothesis that the load-displacement response of the lumbar spine in flexion-extension is affected by the magnitude of the follower preload and the follower preload path. Twenty-one fresh human cadaveric lumbar spines were tested in flexion-extension under increasing compressive follower preload applied along two distinctly different optimized preload paths. The first (neutral) preload path was considered optimum if the specimen underwent the least angular change in its lordosis when the full range of preload (0-1200 N) was applied in its neutral posture. The second (flexed) preload path was optimized for an intermediate specimen posture between neutral and full flexion. A twofold increase in flexion stiffness occurred around the neutral posture as the preload was increased from 0 to 1200 N. The preload magnitude (400 N and larger) significantly affected the range of motion (ROM), with a 25% decrease at 1200 N preload applied along the neutral path. When the preload was applied along a path optimized for an intermediate forward-flexed posture, only a 15% decrease in ROM occurred at 1200 N. The results demonstrate that whole lumbar spine specimens can be subjected to compressive follower preloads of in vivo magnitudes while allowing physiologic mobility under flexion-extension moments. The optimized follower preload provides a method to simulate the resultant vector of the muscles that allow the spine to support physiologic compressive loads induced during flexion-extension activities.

  15. Fisher Matrix Preloaded -- Fisher4Cast

    CERN Document Server

    Bassett, Bruce A; Hlozek, Renée; Kotze, Jacques

    2009-01-01

    The Fisher Matrix is the backbone of modern cosmological forecasting. We describe the Fisher4Cast software: a general-purpose, easy-to-use, Fisher Matrix framework. It is open source, rigorously designed and tested and includes a Graphical User Interface (GUI) with automated LATEX file creation capability and point-and-click Fisher ellipse generation. Fisher4Cast was designed for ease of extension and, although written in Matlab, is easily portable to open-source alternatives such as Octave and Scilab. Here we use Fisher4Cast to present new 3-D and 4-D visualisations of the forecasting landscape and to investigate the effects of growth and curvature on future cosmological surveys. Early releases have been available at http://www.cosmology.org.za since May 2008 with 750 downloads in the first year. Version 2.0 is made public with this paper and includes a Quick Start guide and the code used to produce the figures in this paper, in the hope that it will be useful to the cosmology and wider scientific communitie...

  16. Dose-related effects of alcohol on cognitive functioning.

    Directory of Open Access Journals (Sweden)

    Matthew J Dry

    Full Text Available We assessed the suitability of six applied tests of cognitive functioning to provide a single marker for dose-related alcohol intoxication. Numerous studies have demonstrated that alcohol has a deleterious effect on specific areas of cognitive processing but few have compared the effects of alcohol across a wide range of different cognitive processes. Adult participants (N = 56, 32 males, 24 females aged 18-45 years were randomized to control or alcohol treatments within a mixed design experiment involving multiple-dosages at approximately one hour intervals (attained mean blood alcohol concentrations (BACs of 0.00, 0.048, 0.082 and 0.10%, employing a battery of six psychometric tests; the Useful Field of View test (UFOV; processing speed together with directed attention; the Self-Ordered Pointing Task (SOPT; working memory; Inspection Time (IT; speed of processing independent from motor responding; the Traveling Salesperson Problem (TSP; strategic optimization; the Sustained Attention to Response Task (SART; vigilance, response inhibition and psychomotor function; and the Trail-Making Test (TMT; cognitive flexibility and psychomotor function. Results demonstrated that impairment is not uniform across different domains of cognitive processing and that both the size of the alcohol effect and the magnitude of effect change across different dose levels are quantitatively different for different cognitive processes. Only IT met the criteria for a marker for wide-spread application: reliable dose-related decline in a basic process as a function of rising BAC level and easy to use non-invasive task properties.

  17. Modelling and Estimation of Hammerstein System with Preload Nonlinearity

    Directory of Open Access Journals (Sweden)

    Khaled ELLEUCH

    2010-12-01

    Full Text Available This paper deals with modelling and parameter identification of nonlinear systems described by Hammerstein model having asymmetric static nonlinearities known as preload nonlinearity characteristic. The simultaneous use of both an easy decomposition technique and the generalized orthonormal bases leads to a particular form of Hammerstein model containing a minimal parameters number. The employ of orthonormal bases for the description of the linear dynamic block conducts to a linear regressor model, so that least squares techniques can be used for the parameter estimation. Singular Values Decomposition (SVD technique has been applied to separate the coupled parameters. To demonstrate the feasibility of the identification method, an illustrative example is included.

  18. Dose-related Effects of Salvinorin A in Humans: Dissociative, Hallucinogenic, and Memory Effects

    Science.gov (United States)

    MacLean, Katherine A.; Johnson, Matthew W.; Reissig, Chad J.; Prisinzano, Thomas E.; Griffiths, Roland R.

    2012-01-01

    Rationale Salvinorin A is a kappa opioid agonist and the principal psychoactive constituent of the plant Salvia divinorum, which has increased in popularity as a recreational drug over the past decade. Few human studies have examined salvinorin A. Objective This double-blind, placebo-controlled study evaluated the dose-related effects of inhaled salvinorin A in individuals with histories of hallucinogen use. Methods Eight healthy hallucinogen-using adults inhaled up to 16 doses of salvinorin A (0.375 - 21 μg/kg) in ascending order. Physiological, behavioral, and subjective effects were assessed every 2 min for 60 min after administration. Qualitative subjective effects were assessed retrospectively via questionnaires at the end of sessions. Persisting effects were assessed 1 month later. Results Orderly dose-related effects peaked at 2 min and then rapidly dissipated, replicating previous findings. Subjective effects were intense, with maximal drug strength ratings or unresponsiveness frequently observed at high doses. Questionnaires assessing qualitative effects (Hallucinogen Rating Scale, Pharmacological Class Questionnaire) suggested some overlap with serotonergically mediated classic hallucinogens. Salvinorin A also produced dose-related dissociative effects and impairments in recall/recognition memory. At 1-month follow-up, there was no evidence of persisting adverse effects. Participants reported salvinorin A effects were qualitatively different from other drugs. Conclusions Salvinorin A produces a unique profile of subjective and cognitive effects, including strong dissociative effects and memory impairment, which only partially overlap with classic hallucinogen effects. Along with nonhuman studies of salvinorin A, these results are important for understanding the neurobiology of the kappa opioid system and may ultimately have important therapeutic applications. PMID:23135605

  19. Linearity of the Frank-Starling relationship in the intact heart: the concept of preload recruitable stroke work.

    Science.gov (United States)

    Glower, D D; Spratt, J A; Snow, N D; Kabas, J S; Davis, J W; Olsen, C O; Tyson, G S; Sabiston, D C; Rankin, J S

    1985-05-01

    The Frank-Starling relationship generally has been examined with filling pressure as the index of preload, resulting in a curvilinear function that plateaus at higher filling pressures. To investigate this relationship further in the intact heart, 32 dogs were chronically instrumented with left ventricular and pleural micromanometers and with regional (10 dogs) or global (22 dogs) ultrasonic dimension transducers. Seven days after implantation, left ventricular pressure and regional or global dimensions were recorded in the conscious state. After autonomic blockade, preload was varied by vena caval occlusion. Myocardial function was assessed by calculating regional or global stroke work, and preload was measured as end-diastolic segment length or chamber volume. The relationship between stroke work and either end-diastolic segment length or chamber volume (termed the preload recruitable stroke work relationship) was highly linear in every study (mean r = .97) and could be quantified by a slope (MW) and x-intercept (LW). Previous nonlinear relationships between stroke work and filling pressure seemed to reflect the exponential diastolic pressure-volume curve. Over the physiologic range of systolic arterial pressures produced by infusion of nitroprusside or phenylephrine, no significant change was observed in MW or LW in the normal dog. Calcium infusion increased both regional and global MW by 71 +/- 19% and 65 +/- 9%, respectively (p less than .02), with no significant change in LW. To normalize for ventricular geometry and heart rate, stroke work was computed from circumferential stress-strain data and converted to myocardial power output, which was then plotted against end-diastolic circumferential strain. This relationship also was highly linear, and the slope, Mmp (mW/cm3 of myocardium), is proposed as a potential measure of intrinsic myocardial performance independent of loading, geometry, and heart rate.

  20. Dose-related effects of propericiazine in rats

    Directory of Open Access Journals (Sweden)

    Cechin E.M.

    2003-01-01

    Full Text Available We evaluated the effects of the neuroleptic agent propericiazine on animal models of anxiety and memory. Adult male Wistar rats (250 to 350 g received intraperitoneal injections of propericiazine (0.05, 0.075 and 0.1 mg/kg, diazepam (1 mg/kg, saline, or diazepam vehicle (20% propylene glycol and 80% saline 30 min prior to the experimental procedure. Animals (10-15 for each task were tested for step-down inhibitory avoidance (0.3-mA footshock and habituation to an open-field for memory assessment, and submitted to the elevated plus-maze to evaluate the effects of propericiazine in a model of anxiety. Animals treated with 0.075 mg/kg propericiazine showed a reduction in anxiety measures (P0.05 in the elevated plus-maze model of anxiety. Memory was not affected by propericiazine in any of the tests, but was impaired by diazepam. The results indicate a dose-related, inverse U-shaped effect of propericiazine in an anxiety model, but not on memory tasks, perhaps reflecting involvement of the dopaminergic system in the mechanisms of anxiety.

  1. Semantic-preload video model based on VOP coding

    Science.gov (United States)

    Yang, Jianping; Zhang, Jie; Chen, Xiangjun

    2013-03-01

    In recent years, in order to reduce semantic gap which exists between high-level semantics and low-level features of video when the human understanding image or video, people mostly try the method of video annotation where in signal's downstream, namely further (again) attach labels to the content in video-database. Few people focus on the idea that: Use limited interaction and the means of comprehensive segmentation (including optical technologies) from the front-end of collection of video information (i.e. video camera), with video semantics analysis technology and corresponding concepts sets (i.e. ontology) which belong in a certain domain, as well as story shooting script and the task description of scene shooting etc; Apply different-level semantic descriptions to enrich the attributes of video object and the attributes of image region, then forms a new video model which is based on Video Object Plan (VOP) Coding. This model has potential intellectualized features, and carries a large amount of metadata, and embedded intermediate-level semantic concept into every object. This paper focuses on the latter, and presents a framework of a new video model. At present, this new video model is temporarily named "Video Model of Semantic-Preloaded or Semantic-Preload Video Model (simplified into VMoSP or SPVM)". This model mainly researches how to add labeling to video objects and image regions in real time, here video object and image region are usually used intermediate semantic labeling, and this work is placed on signal's upstream (i.e. video capture production stage). Because of the research needs, this paper also tries to analyses the hierarchic structure of video, and divides the hierarchic structure into nine hierarchy semantic levels, of course, this nine hierarchy only involved in video production process. In addition, the paper also point out that here semantic level tagging work (i.e. semantic preloading) only refers to the four middle-level semantic. All in

  2. Dynamic preload indicators fail to predict fluid responsiveness in open-chest conditions

    NARCIS (Netherlands)

    de Waal, Eric E. C.; Rex, Steffen; Kruitwagen, Cas L. J. J.; Kalkman, Cor J.; Buhre, Wolfgang F.

    2009-01-01

    Objective: Dynamic preload indicators like pulse pressure variation (PPV) and stroke volume variation (SVV) are increasingly being used for optimizing cardiac preload since they have been demonstrated to predict fluid responsiveness in a variety of perioperative settings. However, in open-chest cond

  3. Novel approach for determining the optimal axial preload of a simulating rotary table spindle system

    Institute of Scientific and Technical Information of China (English)

    SHAN Xiao-biao; XIE Tao; CHEN Wei-shan

    2007-01-01

    This paper presents a new theoretical model to determine the optimal axial preload ora spindle system, for challenging the traditional method which relies heavily on experience of engineers. The axial preloading stiffness was treated as the sum of the spindle modal stiffness and the framework elastic stiffness, based on a novel concept that magnitude of preloads can be controlled by measuring the resonant frequency of a spindle system. By employing an example of a certain type of aircraft simulating rotary table, the modal stiffness was measured on the Agilent 35670A Dynamic Signal Analyzer by experimental modal analysis. The equivalent elastic stiffness was simulated by both finite element analysis in ANSYS(R) and a curve fitting in MATLAB(R). Results showed that the static preloading stiffness of the spindle was 7.2125×107 N/m, and that the optimal preloading force was 120.0848 N. Practical application proved the feasibility of our method.

  4. Effect of cyclic torsional preloading on cyclic fatigue resistance of ProTaper Next and Mtwo nickel–titanium instruments

    Directory of Open Access Journals (Sweden)

    Eugenio Pedullà

    2015-06-01

    Conclusions: Torsional preloads reduced the cyclic fatigue resistance of M-wire and conventional (as ProTaper Next and Mtwo NiTi rotary instruments except for Mtwo with 25% or 50% of torsional preloading.

  5. Combined and interactive effects of interference fit and preloads on composite joints

    Institute of Scientific and Technical Information of China (English)

    Liu Longquan; Zhang Junqi; Chen Kunkun; Wang Hai

    2014-01-01

    The combined and interactive effects of the bolt-hole fit conditions and the preloads of the fasteners on the load carrying capacity of single-lap composite-to-titanium bolted joints have been investigated both experimentally and numerically. Quasi-static tests of the hybrid joints with different fit conditions are implemented, and a three dimensional finite element progressive failure analysis model is proposed to predict the influences of the bolt-hole fit conditions and fastener’s pre-loads on the mechanical behaviors of the joints. Based on the experimental validated simulation method, a multi-factor, mixed levels orthogonal design table and the analysis of variance method are used to arrange the simulation conditions and to further study the interactive effects of preloads and fit conditions. Through the analysis of the results, for the researched double bolt, single-lap composite-titanium joints, it is found that:the effects of both the interference fit and the preloads change from positive into negative mode with the increase of the interference fit values or preload values; appropriate bolt-hole fit conditions and preloads can improve the bolt-hole contact conditions of the loaded joints, and then retard the fiber failures around the fastener holes, and increase the load carrying capacity of the joints eventually; the interactive effect of the bolt-hole interference fit conditions and preloads cannot be ignored and the parameters need to be considered together and synthetically as the joints are being optimized.

  6. Probability distribution of von Mises stress in the presence of pre-load.

    Energy Technology Data Exchange (ETDEWEB)

    Segalman, Daniel Joseph; Field, Richard V.,; Reese, Garth M.

    2013-04-01

    Random vibration under preload is important in multiple endeavors, including those involving launch and re-entry. There are some methods in the literature to begin to address this problem, but there is nothing that accommodates the existence of preloads and the necessity of making probabilistic statements about the stress levels likely to be encountered. An approach to achieve to this goal is presented along with several simple illustrations.

  7. Preloaded Motorway Embankments:an environmentally sound solution for soft soil areas

    OpenAIRE

    1999-01-01

    Road construction, particularly involving soft soil replacement, draws very heavily on the scarce resources of sand and gravel. One environmentally appealing alternative to complete soft soil replacement is preloading where the sand/gravel materials may be re-used along the road alignment. The paper describes the first application of the method for motorways in connection with the completion of the Danish motorway infrastructure. To validate the feasibility of preloading an instrumented test ...

  8. Influence of pre-load coefficient of TPJBs with even number pads on shaft lateral vibration

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    For a rotating machine with one or more tilting pad journal bearings (TPJBs), it is acommon state that pad-to-journal assembling clearances are uneven in one bearing, or inconsis-tent relationship of assembling clearances are encountered among all the bearings. Consideringthe structural characteristics of a TPJB, a concept named as "pad pair pre-load coefficient" corre-sponding to bearing pre-load coefficient is proposed. Firstly, the influence of bearing pre-load coef-ficient and pad pair pre-load coefficient on shaft vibration in a Jeffcot rotor is analyzed. Then takingNo.1 unit with two TPJBs in Guangzhou pumped storage power plant (GPSP) as an example, theinfluence of inconsistent relationship of the two bearing pre-load coefficients on shaft vibration isanalyzed. The results show that variety of one bearing pre-load coefficient will only influence vibra-tion amplitude, not involving the shape of shaft center orbit. But variety of one or more "pad pairpre-load coefficient" will influence not only vibration amplitude, but also the shape of orbit-whichwill be turned from a circle to an ellipse. By investigating variation characteristics of shape andvibration amplitude of orbits at the TPJBs, some theoretical bases will be supplied for diagnosingthe condition of the unit bearings.

  9. Preload Analysis of Screw Bolt Joints on the First Wall Graphite Tiles in EAST

    Institute of Scientific and Technical Information of China (English)

    曹磊; 宋云涛

    2012-01-01

    The first wall in the Experimental Advanced Superconducting Tokamak (EAST) used graphite tiles to withstand high thermal energy. The graphite tiles are mounted on the heat sink using screw bolts which have been preloaded to produce a clamp force. The clamp force is very important to keep the graphite tiles tightly on the surface of the heat sink so that the heat flux crosses this contacting surface in a small thermal resistor. Without the clamp force, the small gap between the graphite tiles and the heat sink will make it impossible for thermal power to be carried away by cooling water. Some bolts may even fall off with the loss of clamp force. From the mathematical models, the loss process of the clamp force has been studied. Research results explain how the different thermal expansions of three members of the screw joint makes the clamp force decrease to zero under temperature rise and external force, and how the stiffness affects the relation between the clamp force and temperature. The research also gives the critical temperature at which the clamp force can remain above zero. Analysis results indicate that the current screw joints are almost destined to lose their clamp force during the running time of EAST, so the bolt joints should be redesigned in order to improve its reliability.

  10. In vivo release by vagal stimulation of L-/sup 3/Hglutamic acid in the nucleus tractus solitarius preloaded with L-/sup 3/Hglutamine

    Energy Technology Data Exchange (ETDEWEB)

    Granata, A.R.; Sved, A.F.; Reis, D.J.

    1984-01-01

    In anesthetized and paralyzed rats, using a push-pull perfusion technique, we examined the effect of bilateral vagal stimulation on the release of L-/sup 3/Hglutamic acid (L-/sup 3/HGlu) from the nucleus tractus solitarius (NTS), after preloading the tissue either with L-/sup 3/HGlu or L-/sup 3/Hglutamine (L-/sup 3/HGln). Vagal stimulation sufficient to produce a maximum fall of arterial pressure (AP) evoked release of L-/sup 3/HGlu from the NTS when the tissue was preloaded with either /sup 3/H-Glu or /sup 3/H-Gln, and of D-/sup 3/Haspartic acid (D-/sup 3/HAsp) when this stable Glu analogue was used to preloaded with either /sup 3/H-Glu or /sup 3/H-Gln, and of D-/sup 3/H precursor L-Gln is a good marker of the releasable pool of L-Glu in vivo and are consistent with the hypothesis that L-/sup 3/HGlu is a neurotransmitter in the NTS, mediating the vasodepressor response from cardiopulmonary mechanoreceptors.

  11. Females have greater left ventricular twist mechanics than males during acute reductions to preload.

    Science.gov (United States)

    Williams, Alexandra M; Shave, Rob E; Stembridge, Mike; Eves, Neil D

    2016-07-01

    Compared to males, females have smaller left ventricular (LV) dimensions and volumes, higher ejection fractions (EF), and higher LV longitudinal and circumferential strain. LV twist mechanics determine ventricular function and are preload-dependent. Therefore, the sex differences in LV structure and myocardial function may result in different mechanics when preload is altered. This study investigated sex differences in LV mechanics during acute challenges to preload. With the use of conventional and speckle-tracking echocardiography, LV structure and function were assessed in 20 males (24 ± 6.2 yr) and 20 females (23 ± 3.1 yr) at baseline and during progressive levels of lower body negative pressure (LBNP). Fourteen participants (8 males, 6 females) were also assessed following a rapid infusion of saline. LV end-diastolic volume, end-systolic volume, stroke volume (SV), and EF were reduced in both groups during LBNP (P mechanics following saline infusion. Females have larger LV twist and a faster untwisting velocity than males during large reductions to preload, supporting that females have a greater reliance on LV twist mechanics to maintain SV during severe reductions to preload.

  12. A technique for monitoring fast tuner piezoactuator preload forces for superconducting rf cavities

    Energy Technology Data Exchange (ETDEWEB)

    Pischalnikov, Y.; Branlard, J.; Carcagno, R.; Chase, B.; Edwards, H.; Orris, D.; Makulski, A.; McGee, M.; Nehring, R.; Poloubotko, V.; Sylvester, C.; /Fermilab

    2007-06-01

    The technology for mechanically compensating Lorentz Force detuning in superconducting RF cavities has already been developed at DESY. One technique is based on commercial piezoelectric actuators and was successfully demonstrated on TESLA cavities [1]. Piezo actuators for fast tuners can operate in a frequency range up to several kHz; however, it is very important to maintain a constant static force (preload) on the piezo actuator in the range of 10 to 50% of its specified blocking force. Determining the preload force during cool-down, warm-up, or re-tuning of the cavity is difficult without instrumentation, and exceeding the specified range can permanently damage the piezo stack. A technique based on strain gauge technology for superconducting magnets has been applied to fast tuners for monitoring the preload on the piezoelectric assembly. The design and testing of piezo actuator preload sensor technology is discussed. Results from measurements of preload sensors installed on the tuner of the Capture Cavity II (CCII)[2] tested at FNAL are presented. These results include measurements during cool-down, warmup, and cavity tuning along with dynamic Lorentz force compensation.

  13. EVALUATION OF TROQUE VS CLOSURE BOLT PRELOAD FOR A TYPICAL CONTAINMENT VESSEL UNDER SERVICE CONDITIONS

    Energy Technology Data Exchange (ETDEWEB)

    Smith, A.

    2010-02-16

    Radioactive material package containment vessels typically employ bolted closures of various configurations. Closure bolts must retain the lid of a package and must maintain required seal loads, while subjected to internal pressure, impact loads and vibration. The need for insuring that the specified preload is achieved in closure bolts for radioactive materials packagings has been a continual subject of concern for both designers and regulatory reviewers. The extensive literature on threaded fasteners provides sound guidance on design and torque specification for closure bolts. The literature also shows the uncertainty associated with use of torque to establish preload is typically between 10 and 35%. These studies have been performed under controlled, laboratory conditions. The ability to insure required preload in normal service is, consequently, an important question. The study described here investigated the relationship between indicated torque and resulting bolt load for a typical radioactive materials package closure using methods available under normal service conditions.

  14. The Influence of Preload on the Work of Angular Contact Ball Bearings

    Directory of Open Access Journals (Sweden)

    Kaczor Jarosław

    2016-09-01

    Full Text Available Optimum values of preload can be achieved in well-tried constructions and then applied in similar structures. For new structures, it is recommended to calculate the preload force and to test the correctness of calculation by means of experiments. In practice it may be necessary to introduce corrections, because not all real work parameters can be precisely known. Credibility of calculations depends, first of all, on the consistence between the assumptions concerning temperature conditions during work and elastic deformations of cooperating elements – first of all of a holder – and the real work conditions. The aim of the study is to determine how preload influences the work of a system of angular ball bearings, in relation to durability of bearing, moment of friction and rigidity of the bearing.

  15. Does fasting influence preload responsiveness in ASA 1 and 2 volunteers?

    Science.gov (United States)

    Alves, Daniel Rodrigues; Ribeiras, Regina

    Preoperative fasting was long regarded as an important cause of fluid depletion, leading to hemodynamic instability during surgery should replenishment is not promptly instituted. Lately, this traditional point of view has been progressively challenged, and a growing number of authors now propose a more restrictive approach to fluid management, although doubt remains as to the true hemodynamic influence of preoperative fasting. We designed an observational, analytic, prospective, longitudinal study in which 31 ASA 1 and ASA 2 volunteers underwent an echocardiographic examination both before and after a fasting period of at least 6hours (h). Data from both static and dynamic preload indices were obtained on both periods, and subsequently compared. Static preload indices exhibited a markedly variable behaviour with fasting. Dynamic indices, however, were far more consistent with one another, all pointing in the same direction, i.e., evidencing no statistically significant change with the fasting period. We also analysed the reliability of dynamic indices to respond to known, intentional preload changes. Aortic velocity time integral (VTI) variation with the passive leg raise manoeuvre was the only variable that proved to be sensitive enough to consistently signal the presence of preload variation. Fasting does not appear to cause a change in preload of conscious volunteers nor does it significantly alter their position in the Frank-Starling curve, even with longer fasting times than usually recommended. Transaortic VTI variation with the passive leg raise manoeuvre is the most robust dynamic index (of those studied) to evaluate preload responsiveness in spontaneously breathing patients. Copyright © 2016 Sociedade Brasileira de Anestesiologia. Published by Elsevier Editora Ltda. All rights reserved.

  16. Whey protein preloads are more beneficial than soy protein preloads in regulating appetite, calorie intake, anthropometry, and body composition of overweight and obese men.

    Science.gov (United States)

    Tahavorgar, Atefeh; Vafa, Mohammadreza; Shidfar, Farzad; Gohari, Mahmoodreza; Heydari, Iraj

    2014-10-01

    High-protein diets exert beneficial effects on appetite, anthropometry, and body composition; however, the effects of protein preloads depend on the amount, type, and time of consumption. Therefore, we hypothesized that long-term supplemental preloads of whey protein concentrate (WPC) and soy protein isolate (SPI) consumed 30 minutes before the largest meal would decrease appetite, calorie intake (CI), and anthropometry and improve body composition in overweight and obese men in free-living conditions. The subjects included 45 men with a body mass index between 25 and 40 kg/m(2) and who were randomly allocated to either the WPC (n = 26) or SPI (n = 19) groups. For 12 weeks, the subjects consumed 65 g WPC or 60 g SPI that was dissolved in 500 mL water 30 minutes before their ad libitum lunch. Appetite, CI, anthropometry, and body composition were assessed before and after the study and biweekly throughout. After 12 weeks, mean changes between the groups were significant for appetite (P = .032), CI (P = .045), anthropometry (body weight [P = .008], body mass index [P = .006], and waist circumference), and body composition (body fat mass and lean muscle [P < .001]). Relative to baseline, within-group mean changes from WPC were significant for appetite, CI, anthropometry, and body composition (P < .001). In the SPI group, mean changes were significant, relative to baseline, for all variables except lean muscle (P = .37). According to this 12-week study, WPC preloads conducted 30 minutes prior to the ad libitum main meal exerted stronger beneficial effects than did SPI preloads on appetite, CI, anthropometry, and body composition of free-living overweight and obese men.

  17. Stimulation of Methanol Degradation in UASB Reactors: In Situ Versus Pre-Loading Cobalt on Anaerobic Granular Sludge

    NARCIS (Netherlands)

    Zandvoort, M.H.; Gieteling, J.; Lettinga, G.; Lens, P.N.L.

    2004-01-01

    The effect of pre-loading and in situ loading of cobalt onto a cobalt-limited granular sludge on the performance of methanol fed bioreactors was investigated. One upflow anaerobic sludge bed (UASB) reactor was inoculated with cobalt pre-loaded sludge (24h; 30degreesC; 1 mM CoCl2) and a second UASB w

  18. Stimulation of Methanol Degradation in UASB Reactors: In Situ Versus Pre-Loading Cobalt on Anaerobic Granular Sludge

    NARCIS (Netherlands)

    Zandvoort, M.H.; Gieteling, J.; Lettinga, G.; Lens, P.N.L.

    2004-01-01

    The effect of pre-loading and in situ loading of cobalt onto a cobalt-limited granular sludge on the performance of methanol fed bioreactors was investigated. One upflow anaerobic sludge bed (UASB) reactor was inoculated with cobalt pre-loaded sludge (24h; 30degreesC; 1 mM CoCl2) and a second UASB

  19. Dynamic Fracture Properties of Rocks Subjected to Static Pre-load Using Notched Semi-circular Bend Method

    Science.gov (United States)

    Chen, Rong; Li, Kang; Xia, Kaiwen; Lin, Yuliang; Yao, Wei; Lu, Fangyun

    2016-10-01

    A dynamic load superposed on a static pre-load is a key problem in deep underground rock engineering projects. Based on a modified split Hopkinson pressure bar test system, the notched semi-circular bend (NSCB) method is selected to investigate the fracture initiation toughness of rocks subjected to pre-load. In this study, a two-dimensional ANSYS finite element simulation model is developed to calculate the dimensionless stress intensity factor. Three groups of NSCB specimen are tested under a pre-load of 0, 37 and 74 % of the maximum static load and with the loading rate ranging from 0 to 60 GPa m1/2 s-1. The results show that under a given pre-load, the fracture initiation toughness of rock increases with the loading rate, resembling the typical rate dependence of materials. Furthermore, the dynamic rock fracture toughness decreases with the static pre-load at a given loading rate. The total fracture toughness, defined as the sum of the dynamic fracture toughness and initial stress intensity factor calculated from the pre-load, increases with the pre-load at a given loading rate. An empirical equation is used to represent the effect of loading rate and pre-load force, and the results show that this equation can depict the trend of the experimental data.

  20. Effect of preload alternations on a new Doppler echocardiographic index of combined systolic and diastolic performance

    DEFF Research Database (Denmark)

    Møller, J E; Poulsen, S H; Egstrup, K

    1999-01-01

    The objective of the study was to assess the effect of preload alternations on a nongeometric Doppler index of combined systolic and diastolic myocardial performance (MPI). Doppler echocardiography was performed during Valsalva maneuver, passive leg lifting, and after sublingual administration of...

  1. Is the performance of acceleromyography improved with preload and normalization? A comparison with mechanomyography

    DEFF Research Database (Denmark)

    Claudius, Casper; Skovgaard, Lene Theil; Viby-Mogensen, Jørgen

    2009-01-01

    BACKGROUND: Many studies have indicated that acceleromyography and mechanomyography cannot be used interchangeably. To improve the agreement between the two methods, it has been suggested to use a preload and to refer all train-of-four (TOF) ratios to the control TOF (normalization) when using ac...

  2. Prediction of fluid responsiveness by dynamic preload indices in patients undergoing major hepatic resection

    NARCIS (Netherlands)

    Vos, Jaap Jan; Kalmar, A.F.; Struys, Michel; Wietasch, Johann; Hendriks, Herman; Scheeren, Thomas

    2012-01-01

    Background and Goal of the Study:  Dynamic preload indices, based on the arterial pressure waveform (APW; semi-invasive) or on the plethysmographic waveform (PW; non-invasive) are increasingly used to assess fluid responsiveness. We compared the ability of the commercially available APW-based stroke

  3. Prediction of fluid responsiveness by dynamic preload indices in patients undergoing major hepatic resection

    NARCIS (Netherlands)

    Vos, J. J.; Kalmar, A.F.; Struys, M. M. R. F.; Wietasch, J. K. G.; Hendriks, H. G. D.; Scheeren, T. W. L.

    2012-01-01

    Background and Goal of the Study:  Dynamic preload indices, based on the arterial pressure waveform (APW; semi-invasive) or on the plethysmographic waveform (PW; non-invasive) are increasingly used to assess fluid responsiveness. We compared the ability of the commercially available APW-based stroke

  4. A New Method of Combination of Electroosmosis, Vacuum and Surcharge Preloading for Soft Ground Improvement

    Institute of Scientific and Technical Information of China (English)

    刘汉龙; 崔允亮; 沈扬; 丁选明

    2014-01-01

    As-a-rapid-and-effective-ground-improvement-method-is-urgently-required-for-the-booming-land-reclamation-in-China’s-coastal-area,-this-study-proposes-a-new-combined-method-of-electroosmosis,-vacuum-preloading-and-surcharge-preloading.-A-new-type-of-electrical-prefabricated-vertical-drain-(ePVD)-and-a-new-electroosmotic-drainage-system-are-suggested-to-allow-the-application-of-the-new-method.-This-combined-method-is-then-field-tested-and-compared-with-the-conventional-vacuum-combined-with-surcharge-preloading-method.-The-monitoring-and-foundation-test-results-show-that-the-new-method-induces-a-settlement-20%larger-than-that-of-the-conventional-vacuum-combined-with-surcharge-preloading-method-in-the-same-treatment-period,-and-saves-approximately-half-of-the-treatment-time-compared-with-the-vacuum-combined-with-surcharge-preloading-method-according-to-the-finite-element-prediction-of-the-settlement.-The-proposed-method-also-increases-the-vane-shear-strength-of-the-soil-significantly.-The-bearing-capacity-of-the-ground-improved-by-use-of-the-new-proposed-method-raises-118%.-In-comparison,-there-is-only-a-75%rise-when-using-the-vacuum-combined-with-surcharge-preloading-method-during-the-same-reinforcement-period.-All-results-indicate-that-the-proposed-combined-method-is-effective-and-suitable-for-reinforcing-the-soft-clay-ground.-Besides,-the-voltage-applied-between-the-anode-and-cathode-increases-exponentially-versus-treatment-time-when-the-output-current-of-power-supplies-is-kept-constant.-Most-of-the-voltage-potential-in-electroosmosis-is-lost-at-electrodes,-leaving-smaller-than-50%-of-the-voltage-to-be-effectively-transmitted-into-the-soil.

  5. Non-Linear Piezoelectric Actuator with a Preloaded Cantilever Beam

    OpenAIRE

    Yue Wu; Jingshi Dong; Xinbo Li; Zhigang Yang; Qingping Liu

    2015-01-01

    Piezoelectric actuation is widely used for the active vibration control of smart structural systems, and corresponding research has largely focused on linear electromechanical devices. This paper investigates the design and analysis of a novel piezoelectric actuator that uses a piezoelectric cantilever beam with a loading spring to produce displacement outputs. This device has a special nonlinear property relating to converting between kinetic energy and potential energy, and it can be used t...

  6. Potential Risk Analysis of Tailings Dam under Preloading Condition and Its Countermeasures

    Directory of Open Access Journals (Sweden)

    Shuren Wang

    2015-01-01

    Full Text Available It is very important for mine production safety to ensure the stability of the tailings dam. Taking a flatland tailings pond as the background, a threedimensional computational model was built based on a tailings dam under mullock heap preloading condition. Considering the current operating water level conditions, a liquid-solid coupling analysis of the model was conducted.The deformation characteristics of the tailings dam were revealed during successive preloading at the front of the dam. The safety factor and the potential slide face of the tailings dam were calculated under different conditions using the strength reduction method. The results show that the tailings dam in its current condition is basically stable, but if the mullock heap continues to be heightened, the tailings dam will become unstable. Therefore, in order to limit the height of the mullock heap, establishing a monitor and early warning mechanism are put forward to ensure mine production safety.

  7. Static Absolute Force Measurement for Preloaded Piezoelements Used for Active Lorentz Force Detuning System

    CERN Document Server

    Sekalski, S P; Sekalski, S P

    2004-01-01

    To reach high gradients in pulsed operation of superconducting (SC) cavities an active Lorentz force detuning compensation system is needed. For this system a piezoelement can be used as an actuator (other option is a magnetostrictive device). To guarantee the demanded lifetime of the active element, the proper preload force adjustment is necessary. To determine this parameter an absolute force sensor is needed which will be able to operate at cryogenic temperatures. Currently, there is no calibrated commercial available sensor, which will be able to measure the static force in such an environment. The authors propose to use a discovered phenomenon to estimate the preload force applied to the piezoelement. The principle of the proposed solution based on a shape of impedance curve, which changes with the value of applied force. Especially, the position of resonances are monitored. No need of specialized force sensor and measurement in-situ are additional advantages of proposed method.

  8. Automatic control of the preload in adaptive friction drives of chemical production machines

    Science.gov (United States)

    Balakin, P. D.

    2017-08-01

    Being based on the principle of providing the systems with adaptation property to the real parameters and operational condition, the energy effective mechanical system constructed on the base of friction gear with automated preload is offered and this allows keeping mechanical efficiency value adequate transforming drive path to in the terms of multimode operation. This is achieved by integrated control loop, operating on the basis of the laws of motion with the energy of the main power flow by changing automatically the kinematic dimension of the section and, hence, the value of preload in the friction contact. The given ratios of forces and deformations in the control loop are required at the stage of conceptual design to determine design dimensions of power transmission elements with new properties.

  9. Calorie Anticipation Alters Food Intake After Low-Caloric but Not High-Caloric Preloads

    OpenAIRE

    Hogenkamp, Pleunie; Cedernaes, Jonathan; Chapman, Colin; Vogel, Heike; Hjorth, Olof; Zarei, Sanaz; Lundberg, Lina; Brooks, Samantha; Dickson, Suzanne; Benedict, Christian; Schiöth, Helgi

    2013-01-01

    Objective Cognitive factors and anticipation are known to influence food intake. The current study examined the effect of anticipation and actual consumption of food on hormone (ghrelin, cortisol, and insulin) and glucose levels, appetite and ad libitum intake, to assess whether changes in hormone levels might explain the predicted differences in subsequent food intake. Design and Methods During four breakfast sessions, participants consumed a yogurt preload that was either low caloric (LC: 1...

  10. Deconstructing alcohol use on a night out in England: promotions, preloading and consumption.

    Science.gov (United States)

    McClatchley, Kirstie; Shorter, Gillian W; Chalmers, Jenny

    2014-07-01

    To examine alcohol consumed during a drinking event (a single drinking occasion) by those attending public house/on-trade establishments on nights with standard pricing and nights with promotional prices. Data (n = 425) were collected in an ecological momentary assessment over eight nights in two locations (Midlands and London) on both promotional and standard (Saturday) nights. Multiple regression was used to predict event alcohol consumption by sex, age, type of night, alcohol preloading behaviour, marital and employment status, education, Alcohol Use Disorders Identification Test alcohol consumption questions separately or total AUDIT-C and social group size. Mean (UK) units consumed were 11.8 (London) and 14.4 (Midlands). In London, consumption was similar on promotional and standard nights, but in the Midlands, standard night consumption was three units higher. Preloading was reported by 30%; more common on standard nights. Regression analyses revealed being male, preloading and past-year total AUDIT-C were associated with higher event consumption. However, when AUDIT-C questions were added separately, being a standard night was associated with increased event consumption and different AUDIT-C questions were significantly associated with event consumption in each location. Event consumption reflected heavy episodic drinking and was influenced by price. Promotional night consumption either matched standard Saturday night consumption or was slightly lower. In London, there was a significant preference for drinking at least one promotional beverage on promotional nights. On standard nights, consumption was over a wider range of venues, and preloading with off-trade alcohol was more likely. © 2014 Australasian Professional Society on Alcohol and other Drugs.

  11. Comparison of colloid preload versus coload under low dose spinal anesthesia for cesarean delivery

    Science.gov (United States)

    Varshney, Rohit; Jain, Gaurav

    2013-01-01

    Background: Although fluid bolus is considered as a conventional prophylactic measure to prevent spinal-induced hypotension; vasopressors are nevertheless required. Low dose spinal anesthetics could markedly reduce such episodes of hypotension, by minimizing sympathetic blockade. Aims: We chose to compare the relative efficacy of colloid preload versus coload under low dose spinal anesthesia, for elective cesarean delivery. Settings and Design: A prospective, randomized, double-blinded study. Materials and Methods: In total, 42 parturients were randomized to receive a preload (Group P) of hydroxyl ethyl starch (10 ml/kg) over 20 min before initiation of low dose spinal anesthesia (hyperbaric bupivacaine 5.5 mg with fentanyl 25 μg) or coload (Group C) of an identical fluid over 5 min, starting at the time of identification of cerebrospinal fluid. Our primary outcome included hemodynamic parameters and the incidence of hypotension. The neonatal outcome and side-effects were also monitored. Statistical Analysis: Mann-Whitney U test and Fisher's exact/Chi-square test, whichever appropriate. A P < 0.05 was considered to be significant. Results: The incidence of hypotension was lower in Group P (10%) when compared with Group C (25%), though insignificant statistically. The hemodynamic parameters were better in Group P, though intergroup statistical differences were not observed. The time to the first episode of hypotension was longer in the Group P (17 min) as compared with Group C (14 min). No notable side-effects or adverse neonatal outcome was noted. Conclusion: Colloid preload has a clinical advantage over the coload strategy, in reducing hypotensive episodes under low dose spinal anesthesia. Preload is better under large hemodynamic fluctuations while coload is preferable for emergency scenarios. PMID:25885987

  12. Numerical Simulations on Buckling Failure of Preloaded Cylindrical Shell Irradiated by High Power Laser Beam

    Institute of Scientific and Technical Information of China (English)

    王吉; 王肖钧; 王峰; 赵凯

    2004-01-01

    With finite-element software ANSYS 7.0 and simple thermal-mechanical coupling constitutive relations,the buckling failure of preloaded cylindrical shell irradiated by high power laser beam was studied by numerical simulations. The buckling mode and buckling critical loading were analysed for different preloading conditions. The influence of laser intensity, beam irradiation time, preloading conditions and geometric parameters of cylindrical shell on the buckling mode were discussed. The numerical results show that: ① the buckling deformation of the cylindrical shell was concentrated in the area of laser spot and the radial buckling was the main buckling mode, ② a linear relationship between the buckling eigenvalue and the maximum temperature at the center of laser spot was approached, ③ the buckling failure of cylindrical shell was attributed to the coupling effect of the material softening and the radial deformation in the laser spot, and hence to raise the stiffness of the material would enhance the ability for anti-irradiation of structure substantially.

  13. The impact of a preloaded intraocular lens delivery system on operating room efficiency in routine cataract surgery

    Science.gov (United States)

    Jones, Jason J; Chu, Jeffrey; Graham, Jacob; Zaluski, Serge; Rocha, Guillermo

    2016-01-01

    Purpose The aim of this study was to evaluate the operational impact of using preloaded intraocular lens (IOL) delivery systems compared with manually loaded IOL delivery processes during routine cataract surgeries. Methods Time and motion data, staff and surgery schedules, and cost accounting reports were collected across three sites located in the US, France, and Canada. Time and motion data were collected for manually loaded IOL processes and preloaded IOL delivery systems over four surgery days. Staff and surgery schedules and cost accounting reports were collected during the 2 months prior and after introduction of the preloaded IOL delivery system. Results The study included a total of 154 routine cataract surgeries across all three sites. Of these, 77 surgeries were performed using a preloaded IOL delivery system, and the remaining 77 surgeries were performed using a manual IOL delivery process. Across all three sites, use of the preloaded IOL delivery system significantly decreased mean total case time by 6.2%–12.0% (P<0.001 for data from Canada and the US and P<0.05 for data from France). Use of the preloaded delivery system also decreased surgeon lens time, surgeon delays, and eliminated lens touches during IOL preparation. Conclusion Compared to a manual IOL delivery process, use of a preloaded IOL delivery system for cataract surgery reduced total case time, total surgeon lens time, surgeon delays, and eliminated IOL touches. The time savings provided by the preloaded IOL delivery system provide an opportunity for sites to improve routine cataract surgery throughput without impacting surgeon or staff capacity. PMID:27382245

  14. Non-Linear Piezoelectric Actuator with a Preloaded Cantilever Beam

    Directory of Open Access Journals (Sweden)

    Yue Wu

    2015-08-01

    Full Text Available Piezoelectric actuation is widely used for the active vibration control of smart structural systems, and corresponding research has largely focused on linear electromechanical devices. This paper investigates the design and analysis of a novel piezoelectric actuator that uses a piezoelectric cantilever beam with a loading spring to produce displacement outputs. This device has a special nonlinear property relating to converting between kinetic energy and potential energy, and it can be used to increase the output displacement at a lower voltage. The system is analytically modeled with Lagrangian functional and Euler–Lagrange equations, numerically simulated with MATLAB, and experimentally realized to demonstrate its enhanced capabilities. The model is validated using an experimental device with several pretensions of the loading spring, therein representing three interesting cases: a linear system, a low natural frequency system with a pre-buckled beam, and a system with a buckled beam. The motivating hypothesis for the current work is that nonlinear phenomena could be exploited to improve the effectiveness of the piezoelectric actuator’s displacement output. The most practical configuration seems to be the pre-buckled case, in which the proposed system has a low natural frequency, a high tip displacement, and a stable balanced position.

  15. Dose-related Behavioral, Subjective, Endocrine and Psychophysiological Effects Of the Kappa Opioid Agonist Salvinorin A in Humans

    Science.gov (United States)

    Ranganathan, Mohini; Schnakenberg, Ashley; Skosnik, Patrick D.; Cohen, Bruce; Pittman, Brian; Sewell, R. Andrew; D’Souza, Deepak Cyril

    2012-01-01

    Background Salvia divinorum (Salvia) is an increasingly popular recreational drug amongst adolescents and young adults. Its primary active ingredient, Salvinorin A (SA), a highly selective agonist at the kappa opiate receptor (KOR), is believed to be one of the most potent naturally occurring hallucinogens. However, there is little experimental data on the effects of SA in humans. Methods In a 3-day, double-blind, randomized, crossover, counterbalanced study, the behavioral, subjective, cognitive, psychophysiological and endocrine effects of 0 mg, 8 mg and 12 mg of inhaled SA were characterized in 10 healthy individuals who had previously used Salvia. Results SA produced psychotomimetic effects and perceptual alterations including dissociative and somaesthetic effects, increased plasma cortisol and prolactin and reduced resting EEG spectral power. SA administration was associated with a rapid increase of its levels in the blood. SA did not produce euphoria, cognitive deficits or changes in vital signs. The effects were transient and not dose-related. SA administration was very well tolerated without acute or delayed adverse effects. Conclusions SA produced a wide range of transient effects in healthy subjects. The perceptual altering effects and lack of euphoric effects would explain its intermittent use pattern. Such a profile would also suggest a low addictive potential similar to other hallucinogens and consistent with KOR agonism. Further work is warranted to carefully characterize a full spectrum of its effects in humans, to elucidate the underlying mechanisms involved and to explore the basis for individual variability in its effects. PMID:22817868

  16. Cardiac preload responsiveness in children with cardiovascular dysfunction or dilated cardiomyopathy: a multicenter observational study.

    Science.gov (United States)

    de la Oliva, Pedro; Menéndez-Suso, Juan J; Iglesias-Bouzas, Mabel; Álvarez-Rojas, Elena; González-Gómez, José M; Roselló, Patricia; Sánchez-Díaz, Juan I; Jaraba, Susana

    2015-01-01

    To characterize cardiac preload responsiveness in pediatric patients with cardiovascular dysfunction and dilated cardiomyopathy using global end-diastolic volume index, stroke volume index, cardiac index, and extravascular lung water index. Prospective multicenter observational study. Medical/surgical PICUs of seven Spanish University Medical Centers. Seventy-five pediatric patients (42 male, 33 female), median age 36 months (range, 1-207 mo), were divided into three groups: normal cardiovascular status, cardiovascular dysfunction, and dilated cardiomyopathy. All patients received hemodynamic monitoring with PiCCO2 (Pulsion Medical System SE, Munich, Germany). We evaluated 598 transpulmonary thermodilution sets of measurements. In 40 patients, stroke volume index, cardiac index, and global end-diastolic volume index were measured before and after 66 fluid challenges and loadings to test fluid responsiveness at different preload levels. Global end-diastolic volume versus predicted body surface area exhibits a power-law relationship: Global end-diastolic volume = 488.8·predicted body surface area (r = 0.93). Four levels of cardiac preload were established from the resulting "normal" global end-diastolic volume index (= 488.8·predicted body surface area). Stroke volume index and cardiac index versus global end-diastolic volume index/normal global end-diastolic volume index built using a linear mixed model analysis emulated Frank-Starling curves: in cardiovascular dysfunction group, stroke volume index (geometric mean [95% CI]) was 27 mL/m (24-31 mL/m) at "≤ 0.67 times normal global end-diastolic volume index," 37 mL/m (35-40 mL/m) at "> 0.67 ≤ 1.33 times normal global end-diastolic volume index" (Δ stroke volume index = 35%; p 1.33 ≤ 1.51 times normal global end-diastolic volume index" (Δ stroke volume index = 21%; p 1.51 times normal global end-diastolic volume index" (Δ stroke volume index = 4%; p = 1; area under the receiver

  17. Long term ingestion of a preload containing fructo-oligosaccharide or guar gum decreases fat mass but not food intake in mice.

    Science.gov (United States)

    Hadri, Zouheyr; Chaumontet, Catherine; Fromentin, Gilles; Even, Patrick C; Darcel, Nicolas; Bouras, Abdelkader Dilmi; Tomé, Daniel; Rasoamanana, Rojo

    2015-08-01

    Fermentable dietary fibre such as fructo-oligosaccharide and viscous dietary fibers such as guar gum and alginate affect energy homeostasis. The goal of this study was to compare the impact of long term intake of these three dietary fibers on food intake, meal pattern, body weight and fat accumulation in mice. Over a period of 3weeks, the mice were fed daily with a preload containing 32mg of fructo-oligosaccharide or alginate or 13mg of guar gum. Food intake and body weight were monitored weekly, while meal patterns, adiposity and the expression of hypothalamic neuropeptide genes were evaluated at the end of the study period. The 3 dietary fibers produced a similar decrease in total daily food intake (14 to 22%) at the end of the first week, and this effect disappeared over time. The 3 dietary fibers induced a slight variation in satiation parameters. Body weight and expression of hypothalamic neuropeptide genes were not affected by any of the treatment. Preload of fructo-oligosaccharide and guar gum induced a similar and substantial decrease in the development of adiposity (17% and 14%, respectively), while alginate had no effect. Our results demonstrate mainly that the inhibitory effect of dietary fiber on food intake is lost over time, and that guar gum limits fat storage.

  18. The effect of preload/meal energy density on energy intake in a subsequent meal: A systematic review and meta-analysis.

    Science.gov (United States)

    Rouhani, Mohammad Hossein; Surkan, Pamela J; Azadbakht, Leila

    2017-08-01

    To conduct a systematic review and meta-analysis of the effects of preload/meal energy density on energy intake in a subsequent meal(s). Multiple databases were searched for studies published through December 2016 on the effects of preload/meal energy density on energy intake in a subsequent meal(s). We extracted information on mean energy intake in a subsequent meal(s) and on variables that could contribute to between-subject heterogeneity. Forty and Thirty nine eligible studies were identified for our systematic review and meta-analysis, respectively. The meta-analysis showed that preload/meal energy density did not affect energy intake in a subsequent meal(s) (95% CI:-21.21, 21.29). As heterogeneity was remarkable among studies, we stratified the studies by intervention type into "meal" or "preload" classifications. In the "preload" subgroup, studies used either fixed energy or fixed weight preloads. The results reveal that in comparison to a high energy-dense (HED) preload, consuming a low energy-dense (LED) preload with same weight resulted in higher energy intake in a subsequent meal (95% CI: 9.72, 56.19). On the other hand, decreased energy intake was observed after consuming an LED preload compared to after consumption of an HED preload with same energy content (95% CI: -138.71, -57.33). In the "meal" subgroup, studies were categorized by different subsequent meal (i.e., "afternoon or evening", "lunch" and "dinner or post-dinner"). Meta-analysis showed that an LED meal resulted in more energy intake only in afternoon or evening meals (95% CI: 14.82, 31.22). In summary, the current analysis revealed that we can restrict the energy intake by consuming an LED preload. Moreover, consuming an LED preload could favorably affect preload+meal energy intake. Copyright © 2016. Published by Elsevier Ltd.

  19. Hypersensitivity and dose related side effects of phenytoin mimicking critical illness

    Directory of Open Access Journals (Sweden)

    Pillai Lalitha

    2005-01-01

    Full Text Available OBJECTIVE: To describe phenytoin-induced rare hypersensitivity and dose related reactions, emphasizing the importance of early omission of drug to achieve clinical improvement. DESIGN: Case series and review of literature. SETTING: Tertiary level medical intensive care unit. PATIENTS: Three cases, two of whom had hypersensitivity reactions and the third had drug-induced dyskinesia. INTERVENTION: Omission of phenytoin and corticosteroid therapy in two cases. RESULTS: Improvement and discharge. CONCLUSION: A high index of suspicion of drug-induced complications is necessary especially when multiple drugs are being administered to critically ill patients.

  20. Outcomes of Descemet Stripping Endothelial Keratoplasty Using Eye Bank-Prepared Preloaded Grafts.

    Science.gov (United States)

    Palioura, Sotiria; Colby, Kathryn

    2017-01-01

    To evaluate the feasibility of Descemet stripping endothelial keratoplasty using grafts preloaded by an eye bank in a commercially available insertion device. In this retrospective case series, a series of 35 eyes in 34 consecutive patients who underwent Descemet stripping endothelial keratoplasty for Fuchs endothelial dystrophy or previously failed full-thickness grafts at a single tertiary care center from March 2013 to March 2014 was included. The donor tissue had undergone pre-lamellar dissection, trephination, and loading into EndoGlide Ultrathin inserters at the Lions Eye Institute for Transplant and Research (Tampa, FL) and was shipped overnight in Optisol GS to the surgeon (K.C.). Surgery was performed within 24 hours from tissue preparation and loading by the eye bank. Donor and recipient characteristics, endothelial cell density (ECD), best-corrected visual acuity, and central corneal thickness were recorded. The main outcome measures were intraoperative and postoperative complications and ECD loss at 3, 6, and 12 months. One primary graft failure (2.8%), 2 rebubblings (5.7%), and 1 graft rejection (2.8%) occurred. Mean preoperative donor ECD was 2821 ± 199 cells/mm. Six months postoperatively, the mean endothelial cell loss was 25.3% ± 17.2% (n = 32), which remained stable at 1 year (31.5% ± 17.9%, n = 32). Mean best-corrected visual acuity improved from 20/100 preoperatively to 20/25 at a mean follow-up of 1 year (n = 32). Mean central corneal thickness was reduced from 711 ± 110 μm to 638 ± 66 μm at the last follow-up visit. Donor graft tissue preloaded by an eye bank can be used successfully for endothelial keratoplasty. Preloading reduces intraoperative tissue manipulation.

  1. Nitroglycerin reduces augmentation index and central blood pressure independent of effects on cardiac preload

    Institute of Scientific and Technical Information of China (English)

    Mike; Saddon; Karen; McNeil; Philip; Chowienczyk

    2009-01-01

    Objective To determine whether reduction in central pressure augmentation and central systolic blood pressure by nitroglycerine (NTG) results from effects on pre-load or is due to arterial dilation. Methods We compared effects of NTG with those of lower body negative pressure (LBNP). Hemodynamic measurements were made at rest,during LBNP (10,20 and 30 mmHg,each for 15 min) and after NTG (10,30 and 100 μg/min,each dose for 15 min) in ten healthy volunteers. Cardiac pre-load,stroke volume and cardiac output w...

  2. Sugar, perceived healthfulness, and satiety: When does a sugary preload lead people to eat more?

    Science.gov (United States)

    Mandel, Naomi; Brannon, Daniel

    2017-07-01

    In this research, we examine the interplay between physiological and psychological factors that determine whether the sugar level of a preload increases or decreases consumption on a subsequent snack-eating task. In study 1, participants who drank a high-sugar protein shake (which they believed to be healthy) consumed more subsequent snacks than participants who drank a low-sugar protein shake. Study 2 replicated these findings, but only when the shake was labeled as "healthy." When the shake was labeled as "indulgent," the effect was mitigated. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Should we stop using the determination of central venous pressure as a way to estimate cardiac preload?

    Science.gov (United States)

    Muñoz Nañez, Manuel Felipe

    2012-01-01

    Introduction: The determination of the values of central venous pressure has long been used as a guideline for volumetric therapy in the resuscitation of the critical patient, but the performance of such parameter is currently being questioned as an effective measurement of cardiac preload. This has aroused great interest in the search for more accurate parameters to determine cardiac preload and a patient's blood volume. Goals and Methods: Based on literature currently available, we aim to discuss the performance of central venous pressure as an effective parameter to determine cardiac preload. Results and Conclusion: Estimating variables such as end-diastolic ventricular area and global end-diastolic volume have a better performance than central venous pressure in determining cardiac preload. Despite the best performance of these devices, central venous pressure is still considered in our setting as the most practical and most commonly available way to assess the patient's preload. Only dynamic variables such as pulse pressure change are superior in determining an individual's blood volume. PMID:24893061

  4. Early clinical experience with a new preloaded one-piece intraocular lens in paediatric cataract surgery.

    Science.gov (United States)

    Gosling, D B; Chan, T K J

    2016-09-01

    PurposeTo report the clinical experience of using the Tecnis PCB00 (Abbott Medical Optics, Santa Ana, CA, USA) preloaded one-piece intraocular lens (IOL) in the setting of a tertiary referral centre for paediatric cataract.MethodsA retrospective case note review of all paediatric cataract surgeries using the Tecnis PCB00 IOL, at a single UK paediatric ophthalmology department.ResultsNine eyes in seven patients received the IOL between December 2014 and January 2016. All patients underwent lens aspiration and insertion of the IOL 'in the bag.' The indications for surgery included developmental cataract (8/9) and traumatic cataract (1/9). Mean age at the time of surgery was 7 years (range 2-14). The median improvement in logMAR best-corrected visual acuity was 0.475 (range 0.250-1.500). The mean follow-up duration was 5 months (range 1-13). No operative or post-operative complications occurred as a result of using the device.ConclusionThe Tecnis PCB00 preloaded IOL appears to be a safe and effective device in treating paediatric cataract.

  5. Quantification of the fungal fraction released from various preloaded fibrous filters during a simulated ventilation restart.

    Science.gov (United States)

    Morisseau, K; Joubert, A; Le Coq, L; Andres, Y

    2017-05-01

    This study aimed to demonstrate that particles, especially those associated with fungi, could be released from fibrous filters used in the air-handling unit (AHU) of heating, ventilation and air-conditioning (HVAC) systems during ventilation restarts. Quantification of the water retention capacity and SEM pictures of the filters was used to show the potential for fungal proliferation in unused or preloaded filters. Five fibrous filters with various particle collection efficiencies were studied: classes G4, M5, M6, F7, and combined F7 according to European standard EN779:2012. Filters were clogged with micronized rice particles containing the fungus Penicillium chrysogenum and then incubated for three weeks at 25°C and 90% relative humidity. The results indicated that the five clogged tested filters had various fungal growth capacities depending on their water retention capacity. Preloaded filters were subjected to a simulated ventilation restart in a controlled filtration device to quantify that the fraction of particles released was around 1% for the G4, 0.1% for the M5 and the M6, and 0.001% for the F7 and the combined F7 filter. The results indicate that the likelihood of fungal particle release by low efficiency filters is significantly higher than by high efficiency filters. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  6. Boronophenylalanine uptake in C6 glioma model is dramatically increased by L-DOPA preloading

    Energy Technology Data Exchange (ETDEWEB)

    Capuani, S. [CNR-INFM SOFT, Department of Physics, Sapienza University of Rome, Piazzale Aldo Moro 2, Rome (Italy); Enrico Fermi Center, Compendio Viminale, Rome (Italy)], E-mail: silvia.capuani@roma1.infn.it; Gili, T. [CNR-INFM SOFT, Department of Physics, Sapienza University of Rome, Piazzale Aldo Moro 2, Rome (Italy); Enrico Fermi Center, Compendio Viminale, Rome (Italy); Bozzali, M. [Neuroimaging Laboratory, Santa Lucia Foundation, Via Ardeatina 306, Rome (Italy); Russo, S. [Victor Horsley Department of Neurosurgery, National Hospital for Neurology and Neurosurgery, Queen Square, London (United Kingdom); Porcari, P. [CNR-INFM SOFT, Department of Physics, Sapienza University of Rome, Piazzale Aldo Moro 2, Rome (Italy); Cametti, C. [CNR-INFM SOFT, Department of Physics, Sapienza University of Rome, Piazzale Aldo Moro 2, Rome (Italy); Department of Physics, Sapienza University of Rome, Piazzale Aldo Moro 2, Rome (Italy); Muolo, M. [Department of Biological Science, University ' Rome III' , Viale G. Marconi 446, Rome (Italy); D' Amore, E. [Serv. Qual./Sicurezza Sperim. Anim., Istituto Superiore di Sanita, Rome (Italy); Maraviglia, B. [Enrico Fermi Center, Compendio Viminale, Rome (Italy); Neuroimaging Laboratory, Santa Lucia Foundation, Via Ardeatina 306, Rome (Italy); Lazzarino, G. [Laboratory of Biochemistry, Department of Chemical Sciences, University of Catania, Viale A. Doria 6, Catania (Italy); Pastore, F.S. [Department of Neuroscience, Institute of Neurosurgery, University ' Tor Vergata' , Via Montpellier 1, Rome (Italy)

    2009-07-15

    One of the main limitations for BNCT effectiveness is the insufficient intake of {sup 10}B nuclei within tumour cells. This work was aimed at investigating the use of L-DOPA as enhancer for boronophenylalanine (BPA) uptake in the C6 glioma model. The investigation was first performed in vitro, and then extended in vivo to the animal model. BPA accumulation in C6 glioma cells was assessed, using radiowave dielectric spectroscopy (RDS), with and without L-DOPA preloading. C6 glioma cells were also implanted in the brain of 25 rats, randomly assigned to two experimental branches: (1) intra-carotid BPA infusion; (2) intra-carotid BPA infusion after pre-treatment with L-DOPA, administrated 24 h before BPA infusion. All animals were sacrificed, and assessment of BPA concentrations in tumour tissue, normal brain, and blood samples was performed using high performance liquid chromatography (HPLC). L-DOPA preloading induced a massive increase of BPA concentration either in vitro on C6 glioma cells or in vivo in the animal model tumour. Moreover, no significant difference was found in the normal brain and blood samples between the two animal groups. This study suggests the potential use of L-DOPA as enhancer for BPA accumulation in malignant gliomas eligible for BNCT.

  7. Assessing cardiac preload by the Initial Systolic Time Interval obtained from impedance cardiography

    Directory of Open Access Journals (Sweden)

    Jan H Meijer

    2010-01-01

    Full Text Available The Initial Systolic Time Interval (ISTI, obtained from the electrocardiogram (ECG and impedance cardiogram (ICG, is considered to be a measure for the time delay between the electrical and mechanical activity of the heart and reflects an early active period of the cardiac cycle. The clinical relevance of this time interval is subject of study. This paper presents preliminary results of a pilot study investigating the use of ISTI in evaluating and predicting the circulatory response to fluid administration in patients after coronary artery bypass graft surgery, by comparing ISTI with cardiac output (CO responsiveness. Also the use of the pulse transit time (PTT, earlier recommended for this purpose, is investigated. The results show an inverse relationship between ISTI and CO at all moments of fluid administration and also an inverse relationship between the changes ΔISTI and ΔCO before and after full fluid administration. No relationships between PTT and CO or ΔPTT and ΔCO were found. It is concluded that ISTI is dependent upon preload, and that ISTI has the potential to be used as a clinical parameter assessing preload.

  8. Dynamic Measurement of Hemodynamic Parameters and Cardiac Preload in Adults with Dengue: A Prospective Observational Study.

    Directory of Open Access Journals (Sweden)

    Vipa Thanachartwet

    Full Text Available Few previous studies have monitored hemodynamic parameters to determine the physiological process of dengue or examined inferior vena cava (IVC parameters to assess cardiac preload during the clinical phase of dengue. From January 2013 to July 2015, we prospectively studied 162 hospitalized adults with confirmed dengue viral infection using non-invasive cardiac output monitoring and bedside ultrasonography to determine changes in hemodynamic and IVC parameters and identify the types of circulatory shock that occur in patients with dengue. Of 162 patients with dengue, 17 (10.5% experienced dengue shock and 145 (89.5% did not. In patients with shock, the mean arterial pressure was significantly lower on day 6 after fever onset (P = 0.045 and the pulse pressure was significantly lower between days 4 and 7 (P50% between days 4 and 5 (P<0.05. Hypovolemic shock was observed in 9 (52.9% patients and cardiogenic shock in 8 (47.1%, with a median (interquartile range time to shock onset of 6.0 (5.0-6.5 days after fever onset, which was the median day of defervescence. Intravascular hypovolemia occurred before defervescence, whereas myocardial dysfunction occurred on the day of defervescence until 2 weeks after fever onset. Hypovolemic shock and cardiogenic shock each occurred in approximately half of the patients with dengue shock. Therefore, dynamic measures to estimate changes in hemodynamic parameters and preload should be monitored to ensure adequate fluid therapy among patients with dengue, particularly patients with dengue shock.

  9. Numerical study on the influences of preload factor on the properties of three-lobe journal bearing

    Institute of Scientific and Technical Information of China (English)

    YAN Qing-hua; YAN Yong-ming; AN Qi

    2008-01-01

    The influences of preload factor on the characteristics of three-lobe journal beating, such as dimen-sionless load capacity, attitude angle, stiffness coefficients and damping coefficients, were studied by using the numerical calculation. And the influences of eccentricity ratio and wide-to-diameter ratio on the characteristics of journal bearing were investigated as well. The results show that with the increasing of preload factor, eccen-tricity ratio and wide-to-diameter ratio, the dimensionless load capacity and damping coefficients increase; meanwhile, the absolute value of stiffness coefficients increases;and with the increasing of preload factor and eccentricity ratio and the decreasing of wide-to-diameter ratio, the attitude angle decreases. The study offers theoretical base for engineering application of three-lobe journal bearing.

  10. Effects of grapefruit, grapefruit juice and water preloads on energy balance, weight loss, body composition, and cardiometabolic risk in free-living obese adults

    Directory of Open Access Journals (Sweden)

    Niswender Kevin D

    2011-02-01

    Full Text Available Abstract Background Reducing dietary energy density has proven to be an effective strategy to reduce energy intakes and promote weight control. This effect appears most robust when a low energy dense preload is consumed before meals. Yet, much discussion continues regarding the optimal form of a preload. The purpose of the present study was to compare effects of a solid (grapefruit, liquid (grapefruit juice and water preload consumed prior to breakfast, lunch and dinner in the context of caloric restriction. Methods Eighty-five obese adults (BMI 30-39.9 were randomly assigned to (127 g grapefruit (GF, grapefruit juice (GFJ or water preload for 12 weeks after completing a 2-week caloric restriction phase. Preloads were matched for weight, calories, water content, and energy density. Weekly measures included blood pressure, weight, anthropometry and 24-hour dietary intakes. Resting energy expenditure, body composition, physical performance and cardiometabolic risk biomarkers were assessed. Results The total amount (grams of food consumed did not change over time. Yet, after preloads were combined with caloric restriction, average dietary energy density and total energy intakes decreased by 20-29% from baseline values. Subjects experienced 7.1% weight loss overall, with significant decreases in percentage body, trunk, android and gynoid fat, as well as waist circumferences (-4.5 cm. However, differences were not statistically significant among groups. Nevertheless, the amount and direction of change in serum HDL-cholesterol levels in GF (+6.2% and GFJ (+8.2% preload groups was significantly greater than water preload group (-3.7%. Conclusions These data indicate that incorporating consumption of a low energy dense dietary preload in a caloric restricted diet is a highly effective weight loss strategy. But, the form of the preload did not have differential effects on energy balance, weight loss or body composition. It is notable that subjects in GF

  11. Preload-based starling-like control for rotary blood pumps: numerical comparison with pulsatility control and constant speed operation.

    Directory of Open Access Journals (Sweden)

    Mahdi Mansouri

    Full Text Available In this study, we evaluate a preload-based Starling-like controller for implantable rotary blood pumps (IRBPs using left ventricular end-diastolic pressure (PLVED as the feedback variable. Simulations are conducted using a validated mathematical model. The controller emulates the response of the natural left ventricle (LV to changes in PLVED. We report the performance of the preload-based Starling-like controller in comparison with our recently designed pulsatility controller and constant speed operation. In handling the transition from a baseline state to test states, which include vigorous exercise, blood loss and a major reduction in the LV contractility (LVC, the preload controller outperformed pulsatility control and constant speed operation in all three test scenarios. In exercise, preload-control achieved an increase of 54% in mean pump flow ([Formula: see text] with minimum loading on the LV, while pulsatility control achieved only a 5% increase in flow and a decrease in mean pump speed. In a hemorrhage scenario, the preload control maintained the greatest safety margin against LV suction. PLVED for the preload controller was 4.9 mmHg, compared with 0.4 mmHg for the pulsatility controller and 0.2 mmHg for the constant speed mode. This was associated with an adequate mean arterial pressure (MAP of 84 mmHg. In transition to low LVC, [Formula: see text] for preload control remained constant at 5.22 L/min with a PLVED of 8.0 mmHg. With regards to pulsatility control, [Formula: see text] fell to the nonviable level of 2.4 L/min with an associated PLVED of 16 mmHg and a MAP of 55 mmHg. Consequently, pulsatility control was deemed inferior to constant speed mode with a PLVED of 11 mmHg and a [Formula: see text] of 5.13 L/min in low LVC scenario. We conclude that pulsatility control imposes a danger to the patient in the severely reduced LVC scenario, which can be overcome by using a preload-based Starling-like control approach.

  12. DYNAMIC BUCKLING OF STATICALLY PRELOADED RING-STIFFENED CYLINDRICAL SHELLS UNDER AXIAL FLUID-SOLID IMPACT LOADING

    Institute of Scientific and Technical Information of China (English)

    Jiang Songqing; Li Yongchi; Hu Xiuzhang; Zheng Jijia

    2000-01-01

    The Initial Imperfection Amplified Criterion is applied to investigate the geometric nonlinear dynamic buckling of statically preloaded ring-stiffened cylindrical shells under axial fluid-solid impact. Tak ing account of the effects of large deformation and initial geometric imperfection, the governing equations are obtained by the Galerkin method and solved by the Runge-Kutta method. The effects of static preloading (uniform external radial pressure) on the buckling features and the load-carrying ability of ring-stiffened cy lindrical shells against axial impact are discussed.

  13. Extent of utilization of the Frank-Starling mechanism in conscious dogs. [preload effects on myocardial regulation

    Science.gov (United States)

    Boettcher, D. H.; Vatner, S. F.; Heyndrickx, G. R.; Braunwald, E.

    1978-01-01

    The left ventricular end-diastolic pressure-dimension relationships in conscious dogs were studied; the ventricle was stressed to its limit in terms of myocardial preload in order to assess the extent of use of the Frank-Starling mechanism under these conditions. The preload was increased through volume loading with saline infusions, the provocation of global myocardial ischemia by constriction of the left main coronary artery, and infusion of methoxamine. While left ventricular end-diastolic pressure increased substantially in the reclining conscious animals, the left ventricular end-diastolic diameter did not increase, suggesting a minimum role for the Frank-Starling mechanism in this case.

  14. Influence of mass moment of inertia on normal modes of preloaded solar array mast

    Science.gov (United States)

    Armand, Sasan C.; Lin, Paul

    1992-01-01

    Earth-orbiting spacecraft often contain solar arrays or antennas supported by a preloaded mast. Because of weight and cost considerations, the structures supporting the spacecraft appendages are extremely light and flexible; therefore, it is vital to investigate the influence of all physical and structural parameters that may influence the dynamic behavior of the overall structure. The study primarily focuses on the mast for the space station solar arrays, but the formulations and the techniques developed in this study apply to any large and flexible mast in zero gravity. Furthermore, to determine the influence on the circular frequencies, the mass moment of inertia of the mast was incorporated into the governing equation of motion for bending. A finite element technique (MSC/NASTRAN) was used to verify the formulation. Results indicate that when the mast is relatively flexible and long, the mass moment inertia influences the circular frequencies.

  15. Dose related efficacy of gabapentin in acute herpetic neuralgia among geriatric patients

    Directory of Open Access Journals (Sweden)

    Sanjay Kumar Kanodia

    2012-01-01

    Full Text Available Background: Herpes zoster is an intractable painful condition, more severe in elderly patients. The pain during the first 30 days of onset is known as Acute Herpetic Neuralgia. Multiple treatments using non-steroidal anti-inflammatory drugs (NSAIDs, opioids, and tricyclic anti-depressants are available, but their side effects limit their use in geriatric patients. Gabapentin is also used in chronic neuropathic pain; however, its role in acute herpetic neuralgia is less explored. Aim : This study was aimed to determine dose related efficacy and safety of gabapentin in reducing pain of acute herpetic neuralgia in geriatric patients. Materials and Methods: In this placebo-controlled, four-week trial including 56 subjects, 42 patients received gabapentin in the dosage of 300 mg (n=15, 600 mg (n=14, and 900 mg(n=13 per day in divided doses and 14 patients received placebo within 72 hours of onset of herpes zoster. Results: Subjects receiving gabapentin had a statistically significant reduction (P0.05. Conclusion: The results of this study show that gabapentin is effective in acute herpetic neuralgia in different doses with 600 mg/day being the more appropriate dose in terms of safety and efficacy.

  16. A Comparison of Mixed-Method Cooling Interventions on Preloaded Running Performance in the Heat.

    Science.gov (United States)

    Stevens, Christopher J; Bennett, Kyle J M; Sculley, Dean V; Callister, Robin; Taylor, Lee; Dascombe, Ben J

    2017-03-01

    Stevens, CJ, Bennett, KJM, Sculley, DV, Callister, R, Taylor, L, and Dascombe, BJ. A comparison of mixed-method cooling interventions on preloaded running performance in the heat. J Strength Cond Res 31(3): 620-629, 2017-The purpose of this investigation was to assess the effect of combining practical methods to cool the body on endurance running performance and physiology in the heat. Eleven trained male runners completed 4 randomized, preloaded running time trials (20 minutes at 70% V[Combining Dot Above]O2max and a 3 km time trial) on a nonmotorized treadmill in the heat (33° C). Trials consisted of precooling by combined cold-water immersion and ice slurry ingestion (PRE), midcooling by combined facial water spray and menthol mouth rinse (MID), a combination of all methods (ALL), and control (CON). Performance time was significantly faster in MID (13.7 ± 1.2 minutes; p < 0.01) and ALL (13.7 ± 1.4 minutes; p = 0.04) but not PRE (13.9 ± 1.4 minutes; p = 0.24) when compared with CON (14.2 ± 1.2 minutes). Precooling significantly reduced rectal temperature (initially by 0.5 ± 0.2° C), mean skin temperature, heart rate and sweat rate, and increased iEMG activity, whereas midcooling significantly increased expired air volume and respiratory exchange ratio compared with control. Significant decreases in forehead temperature, thermal sensation, and postexercise blood prolactin concentration were observed in all conditions compared with control. Performance was improved with midcooling, whereas precooling had little or no influence. Midcooling may have improved performance through an attenuated inhibitory psychophysiological and endocrine response to the heat.

  17. Efficacy of Sealing Agents on Preload Maintenance of Screw-Retained Implant-Supported Prostheses.

    Science.gov (United States)

    Seloto, Camila Berbel; Strazzi Sahyon, Henrico Badaoui; Dos Santos, Paulo Henrique; Delben, Juliana Aparecida; Assunção, Wirley Gonçalves

    2017-09-22

    The aim of this study was to evaluate the effect of sealing agents on preload maintenance of screw joints. A total of four groups (n = 10 in each group) of abutment/implant systems, including external hexagon implants and antirotational UCLA abutments with a metallic collar in cobalt-chromium alloy, were assessed. In the control group (CG), no sealing agent was used at the abutment screw/implant interface. In the other groups, three different sealing agents were used at the abutment screw/implant interface: anaerobic sealing agent for medium torque (ASMT), anaerobic sealing agent for high torque (ASHT), and cyanoacrylate-based bonding agent (CYAB). All abutments were attached to the implants at 32 ± 1 N.cm. After 48 ± 2 hours of initial tightening, loosing torque (detorque) was measured using a digital torque wrench. Data were analyzed using Shapiro-Wilk, Wilcoxon, and Kruskal-Wallis tests, at 5% level of significance. In the CG and ASMT groups, detorque was lower than the insertion torque (24.6 ± 1.5 N.cm and 24.3 ± 1.1 N.cm, respectively). In the ASHT and CYAB groups, mean detorque increased in comparison to the insertion torque (51.0 ± 7.4 N.cm and 47.7 ± 15.1 N.cm, respectively). The ASHT was more efficient than the other sealing agents, increasing the remaining preload (detorque value) 58.88%. Although the cyanoacrylate-based bonding agent also generated high detorque values, the high standard deviation suggested its lower reliability.

  18. The influence of isometric preload on power expressed during bench press in strength-trained men.

    Science.gov (United States)

    Bartolomei, Sandro; Fukuda, David H; Hoffman, Jay R; Stout, Jeffrey R; Merni, Franco

    2017-03-01

    The purpose of this study was to compare the power expressed during the bench press exercise in resistance-trained men following different pre-activation conditions. Twenty-two trained men (age 24.1 ± 1.7 years, height 178.6 ± 6.1 cm, body mass 81.1 ± 10.6 kg) completed a maximal effort bench press (1-RM) test (100.0 kg ± 8.1 kg). In a subsequent assessment, each participant performed concentric bench press movements with loads of 20%, 30%, 40% and 50% of their 1-RM preceded by either a concentric contraction (CC), a low isometric preload (LIP; 70% 1-RM) or a high isometric preload (HIP; 100% 1-RM) conditions. All movements were performed in a Smith machine with a settable quick-release device. Participants performed all three conditions in randomized fashion. Results indicated that power outputs during the bench press exercise following HIP were significantly (p < 0.05) greater than CC at 20% 1-RM (+9%), 30% 1-RM (+16%) and 40% 1-RM (+14%), and LIP at 20% 1-RM (+4%), 30% 1-RM (+20%) and 40% 1-RM (+15%). No differences were found between conditions at 50% 1-RM. Area under the force-power curve with HIP was greater (p < 0.05) than with CC and LIP. In conclusion, results of this study indicate that the use of a HIP (100% 1-RM) in trained participants results in significantly greater power output during the concentric phase of a multi-joint exercise when compared to standard concentric movement.

  19. Preload-based Starling-like control of rotary blood pumps: An in-vitro evaluation

    Science.gov (United States)

    Gregory, Shaun D.; Salamonsen, Robert F.; Lovell, Nigel H.; Stevens, Michael C.; Pauls, Jo P.; Akmeliawati, Rini; Lim, Einly

    2017-01-01

    Due to a shortage of donor hearts, rotary left ventricular assist devices (LVADs) are used to provide mechanical circulatory support. To address the preload insensitivity of the constant speed controller (CSC) used in conventional LVADs, we developed a preload-based Starling-like controller (SLC). The SLC emulates the Starling law of the heart to maintain mean pump flow (QP¯) with respect to mean left ventricular end diastolic pressure (PLVEDm) as the feedback signal. The SLC and CSC were compared using a mock circulation loop to assess their capacity to increase cardiac output during mild exercise while avoiding ventricular suction (marked by a negative PLVEDm) and maintaining circulatory stability during blood loss and severe reductions in left ventricular contractility (LVC). The root mean squared hemodynamic deviation (RMSHD) metric was used to assess the clinical acceptability of each controller based on pre-defined hemodynamic limits. We also compared the in-silico results from our previously published paper with our in-vitro outcomes. In the exercise simulation, the SLC increased QP¯ by 37%, compared to only 17% with the CSC. During blood loss, the SLC maintained a better safety margin against left ventricular suction with PLVEDm of 2.7 mmHg compared to -0.1 mmHg for CSC. A transition to reduced LVC resulted in decreased mean arterial pressure (MAP) and QP¯ with CSC, whilst the SLC maintained MAP and QP¯. The results were associated with a much lower RMSHD value with SLC (70.3%) compared to CSC (225.5%), demonstrating improved capacity of the SLC to compensate for the varying cardiac demand during profound circulatory changes. In-vitro and in-silico results demonstrated similar trends to the simulated changes in patient state however the magnitude of hemodynamic changes were different, thus justifying the progression to in-vitro evaluation. PMID:28212401

  20. Preload recruitable stroke work in the presence of intact cardiovascular reflexes in rats fed a diet high in unsaturated fats.

    Science.gov (United States)

    Trifunovic, B; Woodiwiss, A J; Norton, G R

    1995-01-15

    A decreased inotropic effect of myocardial beta receptor agonists in animals receiving diets high in unsaturated fats (UNSAT) has been demonstrated. The effect of an UNSAT diet on myocardial systolic performance under different loading conditions, in the presence of intact cardiovascular reflexes, has not been examined. We investigated the effect of an UNSAT diet on preload recruitable stroke work (SW) in the anaesthetised, open chest, ventilated rat. A control (CONTROL, 11% by energy), a high saturated fat (SAT, 37% by energy) and a high UNSAT (37% by energy) diet were fed to three groups of rats. At three months, systolic myocardial performance (stroke work: SW) at increasing left ventricular end diastolic pressures (LVEDP) was measured within a physiological preload range. There were no significant differences in either the slope or the intercept of the LVEDP/SW relation were found between the three diet groups. Systemic vascular resistance and heart rate decreased to the same extent in the three diet groups over the range of preloads examined. This occurred as a consequence of intact baroreceptor reflexes. Hence dietary modulation of unsaturated fats does not influence myocardial contraction over a wide range of physiological preloads in the presence of intact baroreceptor reflexes.

  1. Echocardiographic Measures of Diastolic Function Are Preload Dependent during Triggered Positive Pressure Ventilation: A Controlled Crossover Study in Healthy Subjects

    Directory of Open Access Journals (Sweden)

    Peter Juhl-Olsen

    2012-01-01

    Full Text Available Background. The use of echocardiography in intensive care settings impacts decision making. A prerequisite for the use of echocardiography is relative resistance to changes in volume status and levels of positive pressure ventilation (PPV. Studies on indices of diastolic function report conflicting results with regard to dependence on volume status. Evidence is scarce on PPV. Methods. Ten healthy subjects were exposed to 6 levels of positive end-expiratory pressure (PEEP and pressure support (PS following a baseline reading. All ventilator settings were performed at three positions: horizontal, reverse-Trendelenburg, and Trendelenburg. Echocardiography was performed throughout. Results. During spontaneous breathing, early diastolic transmitral velocity ( changed with positioning (, whereas early diastolic velocity of the mitral annulus ( was independent (. With PPV, and proved preload dependent (. Increases in PEEP, PS, or a combination influenced and in reverse-Trendelenburg- and horizontal positions, but not in the Trendelenburg position. Discussion. The change towards preload dependency of with PPV suggests that PPV increases myocardial preload sensitivity. The susceptibility of and to preload changes during PPV discourages their use in settings of volume shifts or during changes in ventilator settings. Conclusion. Positioning and PPV affect and .

  2. Trunk response to sudden forward perturbations - effects of preload and sudden load magnitudes, posture and abdominal antagonistic activation.

    Science.gov (United States)

    Shahvarpour, Ali; Shirazi-Adl, Aboulfazl; Mecheri, Hakim; Larivière, Christian

    2014-06-01

    Unexpected loading of the spine is a risk factor for low back pain. The trunk neuromuscular and kinematics responses are likely influenced by the perturbation itself as well as initial trunk conditions. The effect of four parameters (preload, sudden load, initial trunk flexed posture, initial abdominal antagonistic activity) on trunk kinematics and back muscles reflex response were evaluated. Twelve asymptomatic subjects participated in sudden forward perturbation tests under six distinct conditions. Preload did not change the reflexive response of back muscles and the trunk displacement; while peak trunk velocity and acceleration as well as the relative load peak decreased. Sudden load increased reflex response of muscles, trunk kinematics and loading variables. When the trunk was initially flexed, back muscles latency was delayed, trunk velocity and acceleration increased; however, reflex amplitude and relative trunk displacement remained unchanged. Abdominal antagonistic preactivation increased reflexive response of muscles but kinematics variables were not affected. Preload, initial flexed posture and abdominal muscles preactivation increased back muscles preactivity. Both velocity and acceleration peaks of the trunk movement decreased with preload despite greater total load. In contrast, they increased in the initial flexed posture and to some extent when abdominal muscles were preactivated demonstrating the distinct effects of pre-perturbation variables on trunk kinematics and risk of injury. Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. Effects of a Protein Preload on Gastric Emptying, Glycemia, and Gut Hormones After a Carbohydrate Meal in Diet-Controlled Type 2 Diabetes

    OpenAIRE

    Ma, Jing; Stevens, Julie E.; Cukier, Kimberly; Maddox, Anne F.; Wishart, Judith M.; Jones, Karen L.; Clifton, Peter M.; Horowitz, Michael; Rayner, Christopher K.

    2009-01-01

    OBJECTIVE We evaluated whether a whey preload could slow gastric emptying, stimulate incretin hormones, and attenuate postprandial glycemia in type 2 diabetes. RESEARCH DESIGN AND METHODS Eight type 2 diabetic patients ingested 350 ml beef soup 30 min before a potato meal; 55 g whey was added to either the soup (whey preload) or potato (whey in meal) or no whey was given. RESULTS Gastric emptying was slowest after the whey preload (P < 0.0005). The incremental area under the blood glucose cur...

  4. Stress Corrosion Cracking of X80 Pipeline Steel in Near-Neutral pH Environment under Constant Load Tests with and without Preload

    Institute of Scientific and Technical Information of China (English)

    Y.Z. Jia; J.Q. Wang; E.H. Han; W. Ke1

    2011-01-01

    Constant load tests in NS4 solution purged with N2-5%CO2 gas mixture were conducted on American Petroleum Institute (API) X80 pipeline steel applied in the 2nd West-East (;as Pipeline project with and without preload. The results show that cracks could initiate and propagate in X80 pipeline steel in near-neutral pH environment under a constant load condition. The life of crack initiation and propagation increased with decreasing applied stress. Preload did not change its corrosion behavior obviously. However, preload reduced the time for crack initiation.

  5. Fluid loading and norepinephrine infusion mask the left ventricular preload decrease induced by pleural effusion.

    Science.gov (United States)

    Wemmelund, Kristian Borup; Ringgård, Viktor Kromann; Vistisen, Simon Tilma; Hyldebrandt, Janus Adler; Sloth, Erik; Juhl-Olsen, Peter

    2017-09-11

    Pleural effusion (PLE) may lead to low blood pressure and reduced cardiac output. Low blood pressure and reduced cardiac output are often treated with fluid loading and vasopressors. This study aimed to determine the impact of fluid loading and norepinephrine infusion on physiologic determinants of cardiac function obtained by ultrasonography during PLE. In this randomised, blinded, controlled laboratory study, 30 piglets (21.9 ± 1.3 kg) had bilateral PLE (75 mL/kg) induced. Subsequently, the piglets were randomised to intervention as follows: fluid loading (80 mL/kg/h for 1.5 h, n = 12), norepinephrine infusion (0.01, 0.03, 0.05, 0.1, 0.2 and 0.3 μg/kg/min (15 min each, n = 12)) or control (n = 6). Main outcome was left ventricular preload measured as left ventricular end-diastolic area. Secondary endpoints included contractility and afterload as well as global measures of circulation. All endpoints were assessed with echocardiography and invasive pressure-flow measurements. PLE decreased left ventricular end-diastolic area, mean arterial pressure and cardiac output (p values  0.05) to baseline. Left ventricular contractility increased with norepinephrine infusion (p = 0.002), but was not affected by fluid loading (p = 0.903). Afterload increased in both active groups (p values > 0.001). Overall, inferior vena cava distensibility remained unchanged during intervention (p values ≥ 0.085). Evacuation of PLE caused numerical increases in left ventricular end-diastolic area, but only significantly so in controls (p = 0.006). PLE significantly reduced left ventricular preload. Both fluid and norepinephrine treatment reverted this effect and normalised global haemodynamic parameters. Inferior vena cava distensibility remained unchanged. The haemodynamic significance of PLE may be underestimated during fluid or norepinephrine administration, potentially masking the presence of PLE.

  6. Nitroglycerin reduces augmentation index and central blood pressure independent of effects on cardiac preload

    Institute of Scientific and Technical Information of China (English)

    Bao-min Liu; Xiao-lin Niu; Ben-yu Jiang; Mike Saddon; Karen McNeil; Philip Chowienczyk

    2009-01-01

    Objective To determine whether reduction In central pressure augmentation and central systolic blood pressure by nitroglycerine (NTG) results from effects on pre-lead or is due to arterial dilation. Methods We compared effects of NTG with these of lower body negative pressure (LBNP). Hemodyunmic measurements were made at rest, during LBNP (10, 20 and 30 mmHg, each for 15 min) and after NTG (10, 30 and 100μg/min, each dose for 15 min) in ten healthy volunteers. Cardiac pre-lead, stroke volume and cardiac output were assessed by echacardiography. Central pressure an mnentation and central systolic pressure were obtained by radial tonometry using a transfer function. Results LBNP (20 mmHg) and NTG (30μg/min) reduced pre-lead (as measured by the peak velocity of the S wave in the superior vena eava) to a similar degree [by (26. 8 ± 3.8) % and (23.9 ± 3. 4) %, respectively]. Compared to LBNP, NTG reduced systemic vascular resistance [by (32. 9 ± 7.5) %, p< 0. 01], decreased peripheral and central pressure augmentation [by (20. 8 ± 3. 4)% units and (12. 9±2. 9)% units, respectively, each P< 0. 01]. Conclusion These results suggest that a reduction in pre-load does not explain reduction in pressure augmentation and central systolic blood pressure by NTG and that these effects are mediated through arterial dilation.

  7. Finite Element Analysis on the Pre-load Structures of the Central Solenoid for the HT-7U Device

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The central solenoid is an important part of the HT-7U device. In this paper, the computational analysis of the stress and the displacement on the pre-load structures of the central solenoid have been made by the finite element analysis system COSMOS/M2.0 under room and/or operating temperature. According to the analytical results, the clip aprons and compression plates are all satisfied with safety design criteria.

  8. Acute effect of alginate-based preload on satiety feelings, energy intake, and gastric emptying rate in healthy subjects.

    Science.gov (United States)

    Georg Jensen, Morten; Kristensen, Mette; Belza, Anita; Knudsen, Jes C; Astrup, Arne

    2012-09-01

    Viscous dietary fibers such as sodium alginate extracted from brown seaweed have received much attention lately for their potential role in energy regulation through the inhibition of energy intake and increase of satiety feelings. The aim of our study was to investigate the effect on postprandial satiety feelings, energy intake, and gastric emptying rate (GER), by the paracetamol method, of two different volumes of an alginate-based preload in normal-weight subjects. In a four-way placebo-controlled, double-blind, crossover trial, 20 subjects (age: 25.9 ± 3.4 years; BMI: 23.5 ± 1.7 kg/m(2)) were randomly assigned to receive a 3% preload concentration of either low volume (LV; 9.9 g alginate in 330 ml) or high volume (HV; 15.0 g alginate in 500 ml) alginate-based beverage, or an iso-volume placebo beverage. The preloads were ingested 30 min before a fixed breakfast and again before an ad libitum lunch. Consumption of LV-alginate preload induced a significantly lower (8.0%) energy intake than the placebo beverage (P = 0.040) at the following lunch meal, without differences in satiety feelings or paracetamol concentrations. The HV alginate significantly increased satiety feelings (P = 0.038), reduced hunger (P = 0.042) and the feeling of prospective food consumption (P = 0.027), and reduced area under the curve (iAUC) paracetamol concentrations compared to the placebo (P = 0.05). However, only a 5.5% reduction in energy intake was observed for HV alginate (P = 0.20). Although they are somewhat contradictory, our results suggest that alginate consumption does affect satiety feelings and energy intake. However, further investigation on the volume of alginate administered is needed before inferring that this fiber has a possible role in short-term energy regulation.

  9. A dynamic model of the windlass mechanism of the foot: evidence for early stance phase preloading of the plantar aponeurosis.

    Science.gov (United States)

    Caravaggi, Paolo; Pataky, Todd; Goulermas, John Y; Savage, Russel; Crompton, Robin

    2009-08-01

    In the present study we have estimated the temporal elongation of the plantar aponeurosis (PA) during normal walking using a subject-specific multi-segment rigid-body model of the foot. As previous studies have suggested that muscular forces at the ankle can pre-load the PA prior to heel-strike, the main purpose of the current study was to test, through modelling, whether there is any tension present in the PA during early stance phase. Reflective markers were attached to bony landmarks to track the kinematics of the calcaneus, metatarsus and toes during barefoot walking. Ultrasonography measurements were performed on three subjects to determine both the location of the origin of the PA on the plantar aspect of the calcaneus, and the radii of the metatarsal heads. Starting with the foot in a neutral, unloaded position, inverse kinematics allowed calculation of the tension in the five slips of the PA during the whole duration of the stance phase. The results show that the PA experienced tension significantly above rest during early stance phase in all subjects (P<0.01), thus providing support for the PA-preloading hypothesis. The amount of preloading and the maximum elongation of the slips of the PA decreased from medial to lateral. The mean maximum tension exerted by the PA was 1.5 BW (body weight) over the three subjects.

  10. Rotordynamic Evaluation of Full Scale Rotor on Tilting Pad Bearings with 0.1 and 0.3 Preload

    Directory of Open Access Journals (Sweden)

    Weimin Wang

    2014-01-01

    Full Text Available A system identification method for rotating machinery stability evaluation is investigated based on sine sweep excitation testing with electromagnetic actuator. The traditional MIMO FRF is transformed into dFRF from real number field to complex field with a transformation matrix, eliminating the influence of forward and backward modal overlap and providing higher accuracy to identify rotor’s first forward modal parameters using the rational polynomial method. The modal parameters are acquired for stability estimation. Furthermore, two sets of bearing with preloads of 0.1 and 0.3 under both load-on-pad (LOP and load-between-pad (LBP conditions are investigated. The effects of oil inlet pressure (1.0 bar–1.75 bar and temperature (43°C–51°C on the stability of rotor are investigated in detail. Results indicate that the stability of rotor will be improved by increasing the oil inlet temperature and pressure. It is found that the rotor is more stable on bearing with 0.1 preload than that of 0.3 preload. Load-on-pad provides more damping to rotor than load-between-pad. The method and outcomes of this paper can provide both theory basis and technology foundation for improving the rotor stability of centrifugal compressors.

  11. An analytical solution for two-dimensional vacuum preloading combined with electro-osmosis consolidation using EKG electrodes.

    Science.gov (United States)

    Shen, Yang; Qiu, Chenchen; Li, Yande; Shi, Wen; Rui, Xiaoxi

    2017-01-01

    China is a country with vast territory, but economic development and population growth have reduced the usable land resources in recent years. Therefore, reclamation by pumping and filling is carried out in eastern coastal regions of China in order to meet the needs of urbanization. However, large areas of reclaimed land need rapid drainage consolidation treatment. Based on past researches on how to improve the treatment efficiency of soft clay using vacuum preloading combined with electro-osmosis, a two-dimensional drainage plane model was proposed according to the Terzaghi and Esrig consolidation theory. However, the analytical solution using two-dimensional plane model was never involved. Current analytical solutions can't have a thorough theoretical analysis of practical engineering and give relevant guidance. Considering the smearing effect and the rectangle arrangement pattern, an analytical solution is derived to describe the behavior of pore-water and the consolidation process by using EKG (electro-kinetic geo synthetics) materials. The functions of EKG materials include drainage, electric conduction and corrosion resistance. Comparison with test results is carried out to verify the analytical solution. It is found that the measured value is larger than the applied vacuum degree because of the stacking effect of the vacuum preloading and electro-osmosis. The trends of the mean measured value and the mean analytical value processes are comparable. Therefore, the consolidation model can accurately assess the change in pore-water pressure and the consolidation process during vacuum preloading combined with electro-osmosis.

  12. Exploring molecular sieve capabilities of activated carbon fibers to reduce the impact of NOM preloading on trichloroethylene adsorption.

    Science.gov (United States)

    Karanfil, Tanju; Dastgheib, Seyed A; Mauldin, Dina

    2006-02-15

    Adsorption of trichloroethylene (TCE) by two activated carbon fibers (ACFs) and two granular activated carbons (GACs) preloaded with hydrophobic and transphilic fractions of natural organic matter (NOM) was examined. ACF10, the most microporous activated carbon used in this study, had over 90% of its pore volume in pores smaller than 10 A. It also had the highest volume in pores 5-8 A, which is the optimum pore size region for TCE adsorption, among the four activated carbons. Adsorption of NOM fractions by ACF10 was, in general, negligible. Therefore, ACF10, functioning as a molecular sieve during preloading, exhibited the least NOM uptake for each fraction, and subsequently the highest TCE adsorption. The other three sorbents had wider pore size distributions, including high volumes in pores larger than 10 A, where NOM molecules can adsorb. As a result, they showed a higher degree of uptake for all NOM fractions, and subsequently lower adsorption capacities for TCE, as compared to ACF10. The results obtained in this study showed that understanding the interplay between the optimum pore size region for the adsorption of target synthetic organic contaminant (SOC) and the pore size region for the adsorption of NOM molecules is important for controlling NOM-SOC competitions. Experiments with different NOM fractions indicated that the degree of NOM loading is important in terms of preloading effects; however the waythatthe carbon pores are filled and loaded by different NOM fractions can be different and may create an additional negative impact on TCE adsorption.

  13. Effects of preload 4 repetition maximum on 100-m sprint times in collegiate women.

    Science.gov (United States)

    Linder, Elizabeth E; Prins, Jan H; Murata, Nathan M; Derenne, Coop; Morgan, Charles F; Solomon, John R

    2010-05-01

    The purpose of this study was to determine the effects of postactivation potentiation (PAP) on track-sprint performance after a preload set of 4 repetition maximum (4RM) parallel back half-squat exercises in collegiate women. All subjects (n = 12) participated in 2 testing sessions over a 3-week period. During the first testing session, subjects performed the Controlled protocol consisting of a 4-minute standardized warm-up, followed by a 4-minute active rest, a 100-m track sprint, a second 4-minute active rest, finalized with a second 100-m sprint. The second testing session, the Treatment protocol, consisted of a 4-minute standardized warm-up, followed by 4-minute active rest, sprint, a second 4-minute active rest, a warm-up of 4RM parallel back half-squat, a third 9-minute active rest, finalized with a second sprint. The results indicated that there was a significant improvement of 0.19 seconds (p sprint was preceded by a 4RM back-squat protocol during Treatment. The standardized effect size, d, was 0.82, indicating a large effect size. Additionally, the results indicated that it would be expected that mean sprint times would increase 0.04-0.34 seconds (p 0.05). The findings suggest that performing a 4RM parallel back half-squat warm-up before a track sprint will have a positive PAP affect on decreased track-sprint times. Track coaches, looking for the "competitive edge" (PAP effect) may re-warm up their sprinters during meets.

  14. Pre-meal video game playing and a glucose preload suppress food intake in normal weight boys.

    Science.gov (United States)

    Branton, Alyson; Akhavan, Tina; Gladanac, Branka; Pollard, Damion; Welch, Jo; Rossiter, Melissa; Bellissimo, Nick

    2014-12-01

    Increased food intake (FI) during television viewing has been reported in children, but it is unknown if this occurs following pre-meal video game playing (VGP). The objective was to determine the effect of pre-meal VGP for 30 min on subjective appetite and emotions, and FI in normal weight (NW) boys after a glucose or control preload. On four test mornings, NW boys (n = 19) received equally sweetened preloads of a non-caloric sucralose control or 50 g glucose in 250 mL of water, with or without VGP for 30 min. Food intake from an ad libitum pizza meal was measured immediately after. Subjective appetite was measured at 0, 15, 30, and 60 min. Subjective emotions were determined by visual analog scale at baseline and immediately before lunch. Both VGP (p = 0.023) and glucose (p decreased FI by 59 and 170 kcal, respectively. Subjective average appetite increased to 30 min (p = 0.003), but was lower after glucose (p = 0.01) in both the VGP and no-VGP conditions compared with the control. Frustration and aggression scores increased after VGP (p <0.05), but did not correlate with FI. However, baseline and pre-meal happiness and excitement scores were inversely associated with FI. In conclusion, both pre-meal VGP and the glucose preload suppressed FI, supporting the roles of both physiologic and environmental factors in the regulation of short-term FI in 9- to 14-year-old NW boys.

  15. RV Myocardial Strain During Pre-Load Augmentation Is Associated With Exercise Capacity in Patients With Chronic HF.

    Science.gov (United States)

    Kusunose, Kenya; Yamada, Hirotsugu; Nishio, Susumu; Ishii, Ayumi; Hirata, Yukina; Seno, Hiromitsu; Saijo, Yoshihito; Ise, Takayuki; Yamaguchi, Koji; Yagi, Shusuke; Soeki, Takeshi; Wakatsuki, Tetsuzo; Sata, Masataka

    2017-07-13

    The aim of this study was to assess the relationship between right ventricular (RV) function during pre-load augmentation and exercise tolerance. Peak oxygen uptake (VO2) is a strong predictor of mortality in chronic heart failure. Cardiac function during pre-load augmentation is an important part of the phenomenon in the evaluation of exercise capacity. We prospectively performed echocardiographic studies in 68 chronic heart failure patients with cardiopulmonary exercise testing (mean age 60 ± 12 years; 69% male). After resting evaluations, echocardiographic parameters were repeated during leg positive pressure (LPP). Exercise capacity was assessed by peak VO2 in all patients (left ventricular ejection fraction: 43 ± 15%). Patients with severely reduced exercise capacity (peak VO2 <14 ml/kg/min) had significantly lower stroke volume index, left ventricular global longitudinal strain and RV strain and higher filling pressure (E/e' and pulmonary arterial systolic pressure) than the remainder. Stroke volume index (β = 0.49), global longitudinal strain (β = -0.61), E/e' (β = -0.32), pulmonary arterial systolic pressure (β = -0.57), and RV strain (β = -0.66) during LPP were independently correlated to peak VO2 (all p < 0.01). RV strain during LPP was the most powerful predictor in identifying patients with severely reduced exercise capacity (cut off value: -17%; sensitivity: 81%; specificity: 88%; areas under the curve: 0.88, p < 0.001) compared with other variables including resting parameters. RV strain during pre-load augmentation correlated independently to peak VO2 and was a powerful predictor in identifying patients with severely reduced exercise capacity. Copyright © 2017 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  16. Effect of Preload Alterations on Left Ventricular Systolic Parameters Including Speckle-Tracking Echocardiography Radial Strain During General Anesthesia.

    Science.gov (United States)

    Weber, Ulrike; Base, Eva; Ristl, Robin; Mora, Bruno

    2015-08-01

    Frequently used parameters for evaluation of left ventricular systolic function are load-sensitive. However, the impact of preload alterations on speckle-tracking echocardiographic parameters during anesthesia has not been validated. Therefore, two-dimensional (2D) speckle-tracking echocardiography radial strain (RS) was assessed during general anesthesia, simulating 3 different preload conditions. Single-center prospective observational study. University hospital. Thirty-three patients with normal left ventricular systolic function undergoing major surgery. Transgastric views of the midpapillary level of the left ventricle were acquired at 3 different positions. Fractional shortening (FS), fractional area change (FAC), and 2D speckle-tracking echocardiography RS were analyzed in the transgastric midpapillary view. Considerable correlation above 0.5 was found for FAC and FS in the zero and Trendelenburg positions (r = 0.629, r = 0.587), and for RS and FAC in the anti-Trendelenburg position (r = 0.518). In the repeated-measures analysis, significant differences among the values measured at the 3 positions were found for FAC and FS. For FAC, there were differences up to 2.8 percentage points between the anti-Trendelenburg position and the other 2 positions. For FS, only the difference between position zero and anti-Trendelenburg was significant, with an observed change of 1.66. Two-dimensional RS was not significantly different at all positions, with observed changes below 1 percentage point. Alterations in preload did not result in clinically relevant changes of RS, FS, or FAC. Observed changes for RS were smallest; however, the variation of RS was larger than that of FS or FAC. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. DOSIS: a Monte Carlo simulation program for dose related studies in mammography.

    Science.gov (United States)

    Delis, H; Spyrou, G; Panayiotakis, G; Tzanakos, G

    2005-06-01

    Dosimetric studies in mammography are addressed by means of a Monte Carlo simulation program. The core of this program (DOSIS: dosimetry simulation studies) is a simulation model developed using FORTRAN 90, enriched with a graphical user interface developed in MS Visual Basic. User defined mammographic technique parameters affecting breast dose are imported to the simulation model and the produced results are provided by means of both absolute (surface dose, exposure at detector plane) and relative quantities (percentage depth dose, isodose curves). The program functionality has been demonstrated in the evaluation of various mammographic examination techniques. Specifically, the influence of tube voltage and filtration on the surface dose and the exposure at detector plane has been studied utilizing a water phantom. Increase of tube voltage from 25 to 30 kVp for a Mo/Mo system resulted in a 42% decrease of the surface dose for a thick breast (6 cm), without changing the exposure at the detector plane. Use of 1.02 mm Al filter for a W anode system operating at 30 kVp resulted in a 19.1% decrease of the surface dose delivered to a 5 cm water equivalent breast. Overall, W/Al systems appear to have improved dosimetric performance, resulting up to a 65% decrease of surface dose compared to Mo/Mo systems, for identical exposures at the detector plane and breast thicknesses.

  18. Direct Laryngoscopy and Endotracheal Intubation Complicated by Anterior Tracheal Laceration Secondary to Protrusion of Preloaded Endotracheal Tube Stylet.

    Science.gov (United States)

    Warner, Matthew A; Fox, Jonathan F

    2016-02-15

    Tracheal wall disruption is a rare complication of endotracheal intubation, typically occurring in the posterior (membranous) trachea lacking cartilaginous support. We present the case of a 68-year-old man who developed an anterior tracheal tear after routine endotracheal intubation, most likely occurring secondary to protrusion of a factory-preloaded stylet beyond the distal orifice of the endotracheal tube. Tracheal disruption should be considered in any patient with subcutaneous emphysema and respiratory distress after tracheal extubation and confirmed with bronchoscopy. Conservative management may be appropriate for those with small tears, hemodynamic stability, and the ability to isolate the tear from positive pressure ventilation.

  19. FE-MODELLING OF A CONTACT LAYER BETWEEN ELEMENTS JOINED IN PRELOADED BOLTED CONNECTIONS FOR THE OPERATIONAL CONDITION

    Directory of Open Access Journals (Sweden)

    Rafał Grzejda

    2014-11-01

    Full Text Available Modelling and calculations of a contact layer between elements joined in a preloaded bolted connection for the operational condition are presented. The physical model of the bolted connection is based on a flexible flange element that is joined with a rigid support by means of the no-bolt model (at the assembly stage or the rigid body bolt model (at the operational stage. The contact layer between joined elements is described as the nonlinear Winkler model. The contact joint model considering an experimental normal elastic characteristic is presented. Examples of normal contact pressure and normal contact deformations distributions are contained.

  20. Dose-related effects of dexamethasone on liver damage due to bile duct ligation in rats

    Institute of Scientific and Technical Information of China (English)

    Halil Eken; Hayrettin Ozturk; Hulya Ozturk; Huseyin Buyukbayram

    2006-01-01

    AIM: To evaluate the effects of dexamethasone on liver damage in rats with bile duct ligation. METHODS: A total of 40 male Sprague-Dawley rats,weighing 165-205 g, were used in this study. Group 1 (sham-control, n = 10) rats underwent laparotomy alone and the bile duct was just dissected from the surrounding tissue. Group 2 rats (untreated, n = 10)were subjected to bile duct ligation (BDL) and no drug was applied. Group 3 rats (low-dose dexa, n = 10)received a daily dose of dexamethasone by orogastric tube for 14 d after BDL. Group 4 rats (high-dose dexa,n = 10) received a daily dose of dexamethasone by orogastric tube for 14 d after BDL. At the end of the twoweek period, biochemical and histological evaluations were processed.RESULTS: The mean serum bilirubin and liver enzyme levels significantly decreased, and superoxide dismutase (SOD), catalase (CAT) and glutathione peroxidase (GSHPx) values were significantly increased in low-dose dexa and high-dose dexa groups when compared to the untreated group. The histopathological score was significantly less in the low-dose and high-dose dexa groups compared to the untreated rats. In the low-dose dexa group, moderate liver damage was seen, while mild liver damage was observed in the high-dose dexa group.CONCLUSION: Corticosteroids reduced liver damage produced by bile duct obstruction. However, the histopathological score was not significantly lower in the high-dose corticosteroid group as compared to the lowdose group. Thus, low-dose corticosteroid provides a significant reduction of liver damage without increased side effects, while high dose is associated not with lower fibrosis but with increased side effects.

  1. An automated method to control preload by compensation for stress relaxation in spontaneously contracting, isometric rat mesenteric lymphatics.

    Science.gov (United States)

    Davis, Michael J; Lane, Megan M; Scallan, Joshua P; Gashev, Anatoliy A; Zawieja, David C

    2007-08-01

    Our objective was to devise a system to automatically correct for stress relaxation of isometric rat mesenteric lymphatics (90-120 microm, ID). Stress relaxation is a particular problem in isometric studies of highly distensible vessels and is evident as a time-dependent, secondary decline in force after an abrupt length increase. Because the phasic contraction pattern of lymphatics is exquisitely sensitive to changes in preload, stress relaxation makes stable contraction patterns difficult to achieve and analyze. A DMT wire myograph was modified to accommodate an Inchworm piezo stack in series with a standard micrometer drive to permit automated control of vessel caliber/force. The force output of the myograph was digitized and computer algorithms were devised to servo control force by changing vessel diameter. The system was tested on passive lymphatics, passive small veins, and lymphatics exhibiting spontaneous force transients. The software was designed to temporarily disable servo control during a spontaneous force transient. For both active and passive lymphatics, stable preloads were very well maintained, indicating that the system was adequately compensating for stress relaxation. The method works well with isometric rat mesenteric lymphatics without disturbing spontaneous activity. It should be applicable to arterial, venous, and lymphatic vessels (80-500 microm in diameter) isolated from other tissues and species.

  2. Analog-Computer Investigation of Effects of Friction and Preload on the Dynamic Longitudinal Characteristics of a Pilot-Airplane Combination

    Science.gov (United States)

    Crane, Harold L.

    1961-01-01

    With an electric analog computer, an investigation has been made of the effects of control frictions and preloads on the transient longitudinal response of a fighter airplane during abrupt small attitude corrections. The simulation included the airplane dynamics, powered control system, feel system, and a simple linearized pseudopilot. Control frictions at the stick pivot and at the servo valve as well as preloads of the stick and valve were considered individually and in combinations. It is believed that the results which are presented in the form of time histories and vector diagrams present a more detailed illustration of the effects of stray forces and compensating forces in the longitudinal control system than has previously been available. Consistent with the results of previous studies, the present results show that any of these four friction and preload forces caused some deterioration of the response. However, even a small amount of valve friction caused an oscillatory pitching response during which the phasing of the valve friction was such that it caused energy to be fed into the pitching oscillation of the air-plane. Of the other friction and preload forces which were considered, it was found that stick preload was close to 180 deg. out of phase with valve friction and thus could compensate in large measure for valve friction as long as the cycling of the stick encompassed the trim point. Either stick friction or valve preload provided a smaller stabilizing effect primarily through a reduction in the amplitude of the resultant force vector acting on the control system. Some data were obtained on the effects of friction when the damping or inertia of the control system or the pilot lag was varied.

  3. An efficient large-scale retroviral transduction method involving preloading the vector into a RetroNectin-coated bag with low-temperature shaking.

    Science.gov (United States)

    Dodo, Katsuyuki; Chono, Hideto; Saito, Naoki; Tanaka, Yoshinori; Tahara, Kenichi; Nukaya, Ikuei; Mineno, Junichi

    2014-01-01

    In retroviral vector-mediated gene transfer, transduction efficiency can be hampered by inhibitory molecules derived from the culture fluid of virus producer cell lines. To remove these inhibitory molecules to enable better gene transduction, we had previously developed a transduction method using a fibronectin fragment-coated vessel (i.e., the RetroNectin-bound virus transduction method). In the present study, we developed a method that combined RetroNectin-bound virus transduction with low-temperature shaking and applied this method in manufacturing autologous retroviral-engineered T cells for adoptive transfer gene therapy in a large-scale closed system. Retroviral vector was preloaded into a RetroNectin-coated bag and incubated at 4°C for 16 h on a reciprocating shaker at 50 rounds per minute. After the supernatant was removed, activated T cells were added to the bag. The bag transduction method has the advantage of increasing transduction efficiency, as simply flipping over the bag during gene transduction facilitates more efficient utilization of the retroviral vector adsorbed on the top and bottom surfaces of the bag. Finally, we performed validation runs of endoribonuclease MazF-modified CD4(+) T cell manufacturing for HIV-1 gene therapy and T cell receptor-modified T cell manufacturing for MAGE-A4 antigen-expressing cancer gene therapy and achieved over 200-fold (≥ 10(10)) and 100-fold (≥ 5 × 10(9)) expansion, respectively. In conclusion, we demonstrated that the large-scale closed transduction system is highly efficient for retroviral vector-based T cell manufacturing for adoptive transfer gene therapy, and this technology is expected to be amenable to automation and improve current clinical gene therapy protocols.

  4. An efficient large-scale retroviral transduction method involving preloading the vector into a RetroNectin-coated bag with low-temperature shaking.

    Directory of Open Access Journals (Sweden)

    Katsuyuki Dodo

    Full Text Available In retroviral vector-mediated gene transfer, transduction efficiency can be hampered by inhibitory molecules derived from the culture fluid of virus producer cell lines. To remove these inhibitory molecules to enable better gene transduction, we had previously developed a transduction method using a fibronectin fragment-coated vessel (i.e., the RetroNectin-bound virus transduction method. In the present study, we developed a method that combined RetroNectin-bound virus transduction with low-temperature shaking and applied this method in manufacturing autologous retroviral-engineered T cells for adoptive transfer gene therapy in a large-scale closed system. Retroviral vector was preloaded into a RetroNectin-coated bag and incubated at 4°C for 16 h on a reciprocating shaker at 50 rounds per minute. After the supernatant was removed, activated T cells were added to the bag. The bag transduction method has the advantage of increasing transduction efficiency, as simply flipping over the bag during gene transduction facilitates more efficient utilization of the retroviral vector adsorbed on the top and bottom surfaces of the bag. Finally, we performed validation runs of endoribonuclease MazF-modified CD4(+ T cell manufacturing for HIV-1 gene therapy and T cell receptor-modified T cell manufacturing for MAGE-A4 antigen-expressing cancer gene therapy and achieved over 200-fold (≥ 10(10 and 100-fold (≥ 5 × 10(9 expansion, respectively. In conclusion, we demonstrated that the large-scale closed transduction system is highly efficient for retroviral vector-based T cell manufacturing for adoptive transfer gene therapy, and this technology is expected to be amenable to automation and improve current clinical gene therapy protocols.

  5. Design, Assembly and Preloading of Ball Bearings for Space Applications- Lessons Learned and Guidelines for Future Success

    Science.gov (United States)

    Videra, E.; Lebreton, C.; Lewis, S. D.; Gaillard, L.

    2013-09-01

    The use of ball bearings in the space industry is commonplace, with a broad range of applications from the most precise pointing mechanisms to extreme long -life and performance-demanding reaction wheels and simpler single-shot devices where precision, performance and life may be less difficult to achieve. Though most application developments are ultimately successful, the lessons learned from the incorrect implementation of ball bearings are, usually for understandable commercial reasons, not widely distributed - but often extremely valuable for industry.The organizations contributing to this paper have an unprecedentedly clear view of numerous spacecraft applications, both successful and otherwise, together with many years of experience in design, handling, lubricating, preloading and testing ball bearings for space applications.In order to help the space community to avoid design or handling errors in future, ESA has mandated bearing manufacturer ADR, and the European Space Tribology Laboratory (ESTL) to create a useful guideline which summarises both best practice and a distillation of the lessons learned from many programs.This paper presents a selection of the more valuable and generally applicable lessons learned by these organizations in the last 30-40 years together with an overview of the recently published guideline document itself [1] which embodies this experience and contains recommendations concerning ball bearing selection, design and conceptual rules and recommendations for assembly, preloading and verification testing.The novelty of this paper comes from the broad range of experiences and applications, both good and bad that the organisations concerned have observed and the publication (for the first time) of guidelines for use by the space mechanisms community in Europe.

  6. A new nonlinear dynamic model of the rotor-bearing system considering preload and varying contact angle of the bearing

    Science.gov (United States)

    Zhang, Xuening; Han, Qinkai; Peng, Zhike; Chu, Fulei

    2015-05-01

    A great deal of research work has been done on the dynamic behaviors of the rotor-bearing system. However, the important effects of load and variation of contact angle on the bearing performance have not been focused on sufficiently. In this paper, a five-degree-of-freedom load distribution model is set up considering the bearing preload and the loads due to the rotor imbalance. Utilizing this model, the variation of the bearing contact angle is investigated thoroughly. The comparisons of the obtained contact angle against the results from literature validate that the proposed load distribution model is effective. With this model, the static ball deformations are obtained considering variation of the contact angle. Through resolving the dynamic displacements of the rotor, the dynamic ball deformations could also be obtained. Then the total restoring forces and moments of the bearings could be formulated. By introducing these nonlinear forces and moments into the rotating system, a new dynamic model considering the preload and the variation of contact angle is set up. The present analyses indicate that the bearing contact angle will be changed remarkably with the effect of bearing load. The deflection vibration of the rotor-bearing system will be underestimated without considering the varying contact angle. With the effect of varying contact angle, the ball passage frequency and its combinations with the shaft rotating frequency become more noticeable. The main resonance regions for the rotor-bearing system shift to the lower speed ranges when the variation of contact angle is taken into account.

  7. The effect of maintaining a constant preload or a constant degree of thumb abduction on the isometric twitch force of the thumb

    NARCIS (Netherlands)

    van Santen, G; Wierda, JMKH

    Objective. To investigate the effects of maintaining a constant preload and of maintaining a constant degree of thumb abduction on the isometric twitch force during mechanomyography of the thumb, we monitored neuromuscular function in patients anaesthetized without the use of a neuromuscular

  8. Research of Preloading Method for Axial Piston Pump with Swash Plate%斜盘式轴向柱塞泵预紧方式研究

    Institute of Scientific and Technical Information of China (English)

    张伟; 吉利科; 朱琳

    2015-01-01

    在斜盘式轴向柱塞泵中,通常采用弹簧对缸体与配油盘进行中心预紧,产生的预压力压紧保持架使柱塞与滑靴回程。目前常见为碟形弹簧及普通螺旋形弹簧,该文对两种弹簧进行比较,同时对使用上述两种弹簧的几种典型中心弹簧预紧方式进行比较、分析,给出在不同场合建议选用的预紧方式。%In general, the cylinder and valve plate is preloaded by spring in axial piston pump with swash plate. Meanwhile the spring can preload the retainer to make the piston and piston shoe back to the swash plate. The structure is widely used in axial piston pump. At present, the disk spring and coil spring are used often. In this paper, several typical preloading methods with the two types of spring above are dis-cussed and analyzed, and the proper preloading method is suggested in different specific applications.

  9. Increase in twitch force of the adductor pollicis muscle with stabilized preload at constant thumb abduction before and after administration of muscle relaxant

    NARCIS (Netherlands)

    van Santen, G; Wierda, JMKH; Fidler, [No Value

    1999-01-01

    Objective. To determine whether the twitch force of the adductor pollicis remains stable when 0.1 Hz single twitch stimulation is started after stabilization of the thumb preload at a constant degree of thumb abduction; also to study any possible increase in twitch force before the onset of and afte

  10. Comparison of arterial pressure and plethysmographic waveform-based dynamic preload variables in assessing fluid responsiveness and dynamic arterial tone in patients undergoing major hepatic resection

    NARCIS (Netherlands)

    Vos, J. J.; Kalmar, A. F.; Struys, M. M. R. F.; Wietasch, J. K. G.; Hendriks, H. G. D.; Scheeren, T. W. L.

    2013-01-01

    Dynamic preload variables to predict fluid responsiveness are based either on the arterial pressure waveform (APW) or on the plethysmographic waveform (PW). We compared the ability of APW-based variations in stroke volume (SVV) and pulse pressure (PPV) and of PW-based plethysmographic variability in

  11. Comparison of arterial pressure and plethysmographic waveform-based dynamic preload variables in assessing fluid responsiveness and dynamic arterial tone in patients undergoing major hepatic resection

    NARCIS (Netherlands)

    Vos, J. J.; Kalmar, A. F.; Struys, M. M. R. F.; Wietasch, J. K. G.; Hendriks, H. G. D.; Scheeren, T. W. L.

    Dynamic preload variables to predict fluid responsiveness are based either on the arterial pressure waveform (APW) or on the plethysmographic waveform (PW). We compared the ability of APW-based variations in stroke volume (SVV) and pulse pressure (PPV) and of PW-based plethysmographic variability

  12. Comparison of arterial pressure and plethysmographic waveform-based dynamic preload variables in assessing fluid responsiveness and dynamic arterial tone in patients undergoing major hepatic resection

    NARCIS (Netherlands)

    Vos, J. J.; Kalmar, A. F.; Struys, M. M. R. F.; Wietasch, J. K. G.; Hendriks, H. G. D.; Scheeren, T. W. L.

    2013-01-01

    Dynamic preload variables to predict fluid responsiveness are based either on the arterial pressure waveform (APW) or on the plethysmographic waveform (PW). We compared the ability of APW-based variations in stroke volume (SVV) and pulse pressure (PPV) and of PW-based plethysmographic variability in

  13. Implications of the center of rotation concept for the reconstruction of anterior column lordosis and axial preloads in spinal deformity surgery.

    Science.gov (United States)

    Koller, Heiko; Mayer, Michael; Zenner, Juliane; Resch, Herbert; Niederberger, Alfred; Fierlbeck, Johann; Hitzl, Wolfgang; Acosta, Frank L

    2012-07-01

    In thoracolumbar deformity surgery, anterior-only approaches are used for reconstruction of anterior column failures. It is generally advised that vertebral body replacements (VBRs) should be preloaded by compression. However, little is known regarding the impact of different techniques for generation of preloads and which surgical principle is best for restoration of lordosis. Therefore, the authors analyzed the effect of different surgical techniques to restore spinal alignment and lordosis as well as the ability to generate axial preloads on VBRs in anterior column reconstructions. The authors performed a laboratory study using 7 fresh-frozen specimens (from T-3 to S-1) to assess the ability for lordosis reconstruction of 5 techniques and their potential for increasing preloads on a modified distractable VBR in a 1-level thoracolumbar corpectomy. The testing protocol was as follows: 1) Radiographs of specimens were obtained. 2) A 1-level corpectomy was performed. 3) In alternating order, lordosis was applied using 1 of the 5 techniques. Then, preloads during insertion and after relaxation using the modified distractable VBR were assessed using a miniature load-cell incorporated in the modified distractable VBR. The modified distractable VBR was inserted into the corpectomy defect after lordosis was applied using 1) a lamina spreader; 2) the modified distractable VBR only; 3) the ArcoFix System (an angular stable plate system enabling in situ reduction); 4) a lordosizer (a customized instrument enabling reduction while replicating the intervertebral center of rotation [COR] according to the COR method); and 5) a lordosizer and top-loading screws ([LZ+TLS], distraction with the lordosizer applied on a 5.5-mm rod linked to 2 top-loading pedicle screws inserted laterally into the vertebra). Changes in the regional kyphosis angle were assessed radiographically using the Cobb method. The bone mineral density of specimens was 0.72 ± 22.6 g/cm(2). The maximum regional

  14. Dose-related carcinogenic effects of water-borne benzo(a)pyrene on livers of two small fish species

    Energy Technology Data Exchange (ETDEWEB)

    Hawkins, W.E.; Walker, W.W.; Overstreet, R.M.; Lytle, T.F.; Lytle, J.S.

    1988-12-01

    Benzo(a)pyrene (BaP) administered by water-borne exposures caused dose-related carcinogenic effects in livers of two small fish species, the Japanese medaka (Oryzias latipes) and the guppy (Poecilia reticulata). Medaka and guppies each were given two 6-h exposures. The first exposure was conducted on 6- to 10-day-old specimens. The second exposure was given 7 days later. The tests incorporated five treatment groups: (1) control, (2) carrier (dimethylformamide) control, (3) low BaP dose (not detectable--4 ppb), (4) intermediate BaP dose (about 8-47 ppb BaP), and (5) high BaP dose (200-270 ppb). Following the high-dose exposure, hepatocellular lesions classified as foci of cellular alteration (altered foci), adenomas, and hepatocellular carcinomas occurred in both species. In medaka, the lesions appeared to develop sequentially with the appearance of altered foci followed by adenomas and then hepatocellular carcinomas. Most lesions in guppies, however, were classified as altered foci although a few adenomas occurred in the early (24-week) sample and hepatocellular carcinomas occurred in the late (52-week) sample. When total lesions were combined, medaka had an 11% incidence at 24 weeks after the initial exposure and 36% incidence at 36 weeks. In guppies, 8% had liver lesions at 24 weeks, 19% at 36 weeks, and 20% at 52 weeks. A single extrahepatic neoplasm, a capillary hemangioma in a gill filament, occurred in a medaka from the 36-week high-dose sample. The results suggest that the medaka and guppy are capable of metabolizing water-borne BaP to carcinogenic metabolites which initiate hepatic tumor development.

  15. Preload dependence of new Doppler techniques limits their utility for left ventricular diastolic function assessment in hemodialysis patients.

    Science.gov (United States)

    Ie, Eric H Y; Vletter, Wim B; ten Cate, Folkert J; Nette, Robert W; Weimar, Willem; Roelandt, Jos R T C; Zietse, Robert

    2003-07-01

    Left ventricular (LV) hypertrophy leads to diastolic dysfunction. Standard Doppler transmitral and pulmonary vein (PV) flow velocity measurements are preload dependent. New techniques such as mitral annulus velocity by Doppler tissue imaging (DTI) and LV inflow propagation velocity measured from color M-mode have been proposed as relatively preload-independent measurements of diastolic function. These parameters were studied before and after hemodialysis (HD) with ultrafiltration to test their potential advantage for LV diastolic function assessment in HD patients. Ten patients (seven with LV hypertrophy) underwent Doppler echocardiography 1 h before, 1 h after, and 1 d after HD. Early (E) and atrial (A) peak transmitral flow velocities, peak PV systolic (s) and diastolic (d) flow velocities, peak e and a mitral annulus velocities in DTI, and early diastolic LV flow propagation velocity (V(p)) were measured. In all patients, the E/A ratio after HD (0.54; 0.37 to 1.02) was lower (P < 0.01) than before HD (0.77; 0.60 to 1.34). E decreased (P < 0.01), whereas A did not. PV s/d after HD (2.15; 1.08 to 3.90) was higher (P < 0.01) than before HD (1.80; 1.25 to 2.68). Tissue e/a after HD (0.40; 0.26 to 0.96) was lower (P < 0.01) than before HD (0.56; 0.40 to 1.05). Tissue e decreased (P < 0.02), whereas a did not. V(p) after HD (30 cm/s; 16 to 47 cm/s) was lower (P < 0.01) than before HD (45 cm/s; 32 to 60 cm/s). Twenty-four hours after the initial measurements values for E/A (0.59; 0.37 to 1.23), PV s/d (1.85; 1.07 to 3.38), e/a (0.41; 0.27 to 1.06), and V(p) (28 cm/s; 23 to 33 cm/s) were similar as those taken 1 h after HD. It is concluded that, even when using the newer Doppler techniques DTI and color M-mode, pseudonormalization, which was due to volume overload before HD, resulted in underestimation of the degree of diastolic dysfunction. Therefore, the advantage of these techniques over conventional parameters for the assessment of LV diastolic function in HD

  16. Dose Relations between Goal Setting, Theory-Based Correlates of Goal Setting and Increases in Physical Activity during a Workplace Trial

    Science.gov (United States)

    Dishman, Rod K.; Vandenberg, Robert J.; Motl, Robert W.; Wilson, Mark G.; DeJoy, David M.

    2010-01-01

    The effectiveness of an intervention depends on its dose and on moderators of dose, which usually are not studied. The purpose of the study is to determine whether goal setting and theory-based moderators of goal setting had dose relations with increases in goal-related physical activity during a successful workplace intervention. A…

  17. Dose Relations between Goal Setting, Theory-Based Correlates of Goal Setting and Increases in Physical Activity during a Workplace Trial

    Science.gov (United States)

    Dishman, Rod K.; Vandenberg, Robert J.; Motl, Robert W.; Wilson, Mark G.; DeJoy, David M.

    2010-01-01

    The effectiveness of an intervention depends on its dose and on moderators of dose, which usually are not studied. The purpose of the study is to determine whether goal setting and theory-based moderators of goal setting had dose relations with increases in goal-related physical activity during a successful workplace intervention. A…

  18. Preloading with L-BPA, L-tyrosine and L-DOPA enhances the uptake of [(18)F]FBPA in human and mouse tumour cell lines.

    Science.gov (United States)

    Wingelhofer, Bettina; Kreis, Katharina; Mairinger, Severin; Muchitsch, Viktoria; Stanek, Johann; Wanek, Thomas; Langer, Oliver; Kuntner, Claudia

    2016-12-01

    Aim of this study was to investigate if cellular [(18)F]FBPA uptake can be increased upon preloading with amino acids. [(18)F]FBPA uptake was assessed in HuH-7, CaCo-2 and B16-F1 cells pretreated with different concentrations or incubation times of L-BPA, L-tyrosine or L-DOPA. Without preloading, highest uptake of [(18)F]FBPA was observed in B16-F1 cells, followed by CaCo-2 cells and HuH-7 cells. In all cell lines higher [(18)F]FBPA accumulation (up to 1.65-fold) was obtained with increasing L-BPA, L-DOPA and L-tyrosine concentrations.

  19. Prevention of altered hemodynamics after spinal anesthesia: A comparison of volume preloading with tetrastarch, succinylated gelatin and ringer lactate solution for the patients undergoing lower segment caesarean section

    Directory of Open Access Journals (Sweden)

    Tapobrata Mitra

    2014-01-01

    Full Text Available Background: Spinal anesthesia has replaced general anesthesia in obstetric practice. Hemodynamic instability is a common, but preventable complication of spinal anesthesia. Preloading the circulation with intravenous fluids is considered a safe and effective method of preventing hypotension following spinal anesthesia. We had conducted a study to compare the hemodynamic stability after volume preloading with either Ringer′s lactate (RL or tetrastarch hydroxyethyl starch (HES or succinylated gelatin (SG in the patients undergoing cesarean section under spinal anesthesia. Materials and Methods: It was a prospective, double-blinded and randomized controlled study. Ninety six ASA-I healthy, nonlaboring parturients were randomly divided in 3 groups HES, SG, RL (n = 32 each and received 10 ml/kg HES 130/0.4; 10 ml/kg SG (4% modified fluid gelatin and 20 ml/kg RL respectively prior to SA scheduled for cesarean section. Heart rate, blood pressure (BP, oxygen saturation was measured. Results: The fall in systolic blood pressure (SBP (<100 mm Hg noted among 5 (15.63%, 12 (37.5% and 14 (43.75% parturients in groups HES, SG, RL respectively. Vasopressor (phenylephrine was used to treat hypotension when SBP <90 mm Hg. Both the results and APGAR scores were comparable in all the groups. Lower preloading volume and less intra-operative vasopressor requirement was noted in HES group for maintaining BP though it has no clinical significance. Conclusion: RL which is cheap, physiological and widely available crystalloid can preload effectively and maintain hemodynamic stability well in cesarean section and any remnant hypotension can easily be manageable with vasopressor.

  20. Shot peening under preloading conditions. Influence on residual stress state and fatigue of components. Festigkeitsstrahlen unter Vorspannung. Auswirkung auf Eigenspannungszustand und Schwingfestigkeit von Bauteilen

    Energy Technology Data Exchange (ETDEWEB)

    Engelmohr, F. (BMW AG, Muenchen (Germany). Hauptabteilung Betriebsfestigkeit); Fiedler, B. (BMW AG, Muenchen (Germany). Hauptabteilung Betriebsfestigkeit)

    1994-10-01

    Lightweight construction of vehicles supports saving of energy. The service life and fatigue strength of certain car components can be improved by shot peening under preloading conditions. Simultaneously the scattering may be reduced. This enables to reduce the weight of those components. This paper deals with the reasons for increasing the fatigue strength and decreasing of its scattering as well as the influence of parameters on these properties for the examples of piston rods and barrel springs. (orig.)

  1. Analysis of the attenuation of railway squeal noise by preloaded rings inserted in wheels.

    Science.gov (United States)

    Brunel, J F; Dufrénoy, P; Charley, J; Demilly, F

    2010-03-01

    Squeal from railway wheels occurring in short radius curves produces a very intense and highly annoying noise in the range 400-8000 Hz. When the excitation, due to lateral forces acting on the wheel, cannot be avoided, additional systems can be added on the wheel to limit acoustic emission. A very economical approach is the use of metal rings inserted into grooves machined in the wheels. Unfortunately the effectiveness of these so called damping rings varies from one wheel to another and for different rings. Because the mechanisms of attenuation are not well understood, these variations have not to date been explained. The aim of this paper is to clarify the attenuation mechanisms for damping rings especially for the first three axial wheel modes, which are the predominant sound radiated ones in curve passage and for which the effectiveness of the treatment is lower. It has been generally assumed that friction between the ring and the groove has been the mechanism for squeal noise attenuation. Here it is shown that the vibration attenuation is due to modal coupling between the wheel and the ring. The validity of this proposed mechanism is investigated using experimental measurements and theoretical and numerical models. The results presented here will provide an avenue for optimization of the damping ring noise control treatment to obtain significant levels of squeal noise attenuation notably for the first three axial modes.

  2. Approximately determining preloading duration considering creep%考虑蠕变时预压期的近似确定方法

    Institute of Scientific and Technical Information of China (English)

    胡亚元

    2012-01-01

    As the secondary consolidation settlement was not taken into account in classical preloading theory and the flaw sometimes happened that the critical consolidation degree was bigger than 100% considering secondary consolidation settlement in Johnson's method, an approximate formula of preloading duration under a single-stage sudden loading was proposed. During the derivation of this approximate formula, Bjerrum's equal-time creep diagram and Yin-Graham equivalent-time rheological model are used and Zeng Guo-xi's approximate formula of consolidation degree is employed. So the approximate formula can be able to avoid the flaw of Johnson's method, and analyze the effects of soft subsoil's consolidation coefficient, creep coefficient, swelling index, surcharge pressure ratio, allowable post-construction settlement and preconsolidation time on preloading duration. Research results show that when surcharge pressure ratio is relatively smaller, preloading duration decays with the power growth of surcharge pressure ratio. An increase in surcharge pressure ratio can obviously make preloading duration short. When surcharge pressure ratio become bigger, preloading duration slowly decays with the growth of surcharge pressure ratio. An increase in surcharge pressure ratio can only make preloading duration a little decrease.%针对经典预压理论无法考虑次固结沉降以及考虑次固结沉降的Johnson法有时会出现临界固结度超过100%的错误,提出预压荷载一次骤然施加完毕后预压持续时间的近似计算公式.在推导该近似公式过程中,利用Bjerrum等时蠕变图和Yin-Graham等效时间线流变模型,采用曾国熙近似固结度计算公式,因此该近似公式能够克服Johnson法的缺陷,分析软基固结系数、蠕变系数、回弹指数、超固结比、工后允许沉降和预固结时间对预压工期的影响.研究表明:当预压超载较小时,预压持续时间随着超载比的增加呈幂函数趋势减少,

  3. Computed tomography to estimate cardiac preload and extravascular lung water. A retrospective analysis in critically ill patients

    Directory of Open Access Journals (Sweden)

    Schmid Roland M

    2011-05-01

    Full Text Available Abstract Background In critically ill patients intravascular volume status and pulmonary edema need to be quantified as soon as possible. Many critically ill patients undergo a computed tomography (CT-scan of the thorax after admission to the intensive care unit (ICU. This study investigates whether CT-based estimation of cardiac preload and pulmonary hydration can accurately assess volume status and can contribute to an early estimation of hemodynamics. Methods Thirty medical ICU patients. Global end-diastolic volume index (GEDVI and extravascular lung water index (EVLWI were assessed using transpulmonary thermodilution (TPTD serving as reference method (with established GEDVI/EVLWI normal values. Central venous pressure (CVP was determined. CT-based estimation of GEDVI/EVLWI/CVP by two different radiologists (R1, R2 without analyzing software. Primary endpoint: predictive capabilities of CT-based estimation of GEDVI/EVLWI/CVP compared to TPTD and measured CVP. Secondary endpoint: interobserver correlation and agreement between R1 and R2. Results Accuracy of CT-estimation of GEDVI ( 800 mL/m2 was 33%(R1/27%(R2. For R1 and R2 sensitivity for diagnosis of low GEDVI (2 was 0% (specificity 100%. Sensitivity for prediction of elevated GEDVI (> 800 mL/m2 was 86%(R1/57%(R2 with a specificity of 57%(R1/39%(R2 (positive predictive value 38%(R1/22%(R2; negative predictive value 93%(R1/75%(R2. Estimated CT-GEDVI and TPTD-GEDVI were significantly different showing an overestimation of GEDVI by the radiologists (R1: mean difference ± standard error (SE: 191 ± 30 mL/m2, p 2, p 10 mL/kg was 30% for R1 and 40% for R2. CT-EVLWI and TPTD-EVLWI were significantly different (R1: mean difference ± SE: 3.3 ± 1.2 mL/kg, p = 0.013; R2: mean difference ± SE: 2.8 ± 1.1 mL/kg, p = 0.021. Again ccc was low with -0.02 (R1; 95% CI: -0.20 to +0.13, BCF = 0.44 and +0.14 (R2; 95% CI: -0.05 to +0.32, BCF = 0.53. GEDVI, EVLWI and CVP estimations of R1 and R2 showed a poor

  4. Comparative study of NMP-preloaded and dip-loaded membranes for guided bone regeneration of rabbit cranial defects.

    Science.gov (United States)

    Karfeld-Sulzer, Lindsay S; Ghayor, Chafik; Siegenthaler, Barbara; Gjoksi, Bebeka; Pohjonen, Timo H; Weber, Franz E

    2017-02-01

    Guided bone regeneration (GBR) has been utilized for several decades for the healing of cranio-maxillofacial bone defects and, particularly in the dental field, by creating space with a barrier membrane to exclude soft tissue and encourage bone growth in the membrane-protected volume. Although the first membranes were non-resorbable, a new generation of GBR membranes aims to biodegrade and provide bioactivity for better overall results. The Inion GTR™ poly(lactide-co-glycolide) (PLGA) membrane is not only resorbable but also bioactive, since it includes N-methylpyrrolidone (NMP), which has been shown to promote bone regeneration. In this study, the effects of loading different amounts of NMP onto the membrane through chemical vapour deposition or dipping have been explored. In vitro release demonstrated that lower levels of NMP led to lower NMP concentrations and slower release, based on total NMP loaded in the membrane. The dipped membrane released almost all of the NMP within 15 min, leading to a high NMP concentration. For the in vivo studies in rabbits, 6 mm calvarial defects were created and left untreated or covered with an ePTFE membrane or PLGA membranes dipped in, or preloaded with, NMP. Evaluation of the bony regeneration revealed that the barrier membranes improved bony healing and that a decrease in NMP content improved the performance. Overall, we have demonstrated the potential of these PLGA membranes with a more favourable NMP release profile and the significance of exploring the effect of NMP on these PLGA membranes with regard to bone ingrowth. Copyright © 2014 John Wiley & Sons, Ltd.

  5. The impact of a pre-loaded multi-ingredient performance supplement on muscle soreness and performance following downhill running.

    Science.gov (United States)

    Ormsbee, Michael J; Ward, Emery G; Bach, Christopher W; Arciero, Paul J; McKune, Andrew J; Panton, Lynn B

    2015-01-01

    The effects of multi-ingredient performance supplements (MIPS) on perceived soreness, strength, flexibility and vertical jump performance following eccentric exercise are unknown. The purpose of this study was to determine the impact of MIPS (NO-Shotgun®) pre-loaded 4 weeks prior to a single bout of downhill running (DHR) on muscle soreness and performance. Trained male runners (n = 20) were stratified by VO2max, strength, and lean mass into two groups; MIPS (n = 10) ingested one serving daily of NO-Shotgun® for 28 days and 30 min prior to all post-testing visits, Control (CON; n = 10) consumed an isocaloric maltodextrin placebo in an identical manner as MIPS. Perceived soreness and performance measurements (strength, flexibility, and jump height) were tested on 6 occasions; 28 days prior to DHR, immediately before DHR (PRE), immediately post (POST) DHR, 24, 48, and 72 hr post-DHR. Perceived soreness significantly increased (p < 0.05) post DHR compared to PRE at all time-points, with no difference between groups. Creatine kinase (CK) and lactate dehydrogenase (LDH) increased over time (p < 0.001) with no group x time interactions (p = 0.236 and p = 0.535, respectively). Significant time effects were measured for strength (p = 0.001), flexibility (p = 0.025) and vertical jump (p < 0.001). There were no group x time interactions for any performance measurements. Consumption of MIPS for 4 weeks prior to a single bout of DHR did not affect perceived soreness, muscle damage, strength, flexibility, or jump performance compared to an isocaloric placebo in trained male runners following a single bout of DHR.

  6. A method for the production of cryopreserved aliquots of antigen-preloaded, mature dendritic cells ready for clinical use.

    Science.gov (United States)

    Feuerstein, B; Berger, T G; Maczek, C; Röder, C; Schreiner, D; Hirsch, U; Haendle, I; Leisgang, W; Glaser, A; Kuss, O; Diepgen, T L; Schuler, G; Schuler-Thurner, B

    2000-11-01

    Dendritic cells (DC) are increasingly used as a vaccine. Unfortunately, a satisfactory cryopreservation of DC in the absence of FCS is not yet available, so that laborious repeated generation of DC from fresh blood or frozen peripheral blood mononuclear cells for each vaccination has been required to date. We now aimed at developing an effective cryopreservation method, and by testing several variables found that it was crucial to combine the most advantageous maturation stimulus with an improved freezing procedure. We generated monocyte-derived DC from leukapheresis products by using GM-CSF and IL-4 and showed that amongst several known maturation stimuli the cocktail consisting of TNF-alpha+IL-1 beta+IL-6+PGE(2) achieved the highest survival of mature DC. We then systematically explored cryopreservation conditions, and found that freezing matured DC at 1 degrees C/min in pure autologous serum+10% DMSO+5% glucose at a cell density of 10x10(6) DC/ml gave the best results. Using this approach 85-100% of the frozen DC could be recovered in a viable state after thawing (Table 1). The morphology, phenotype, survival as well as functional properties (allogeneic mixed leukocyte reaction, induction of influenza matrix or melan A peptide-specific cytotoxic T cells) of these thawed DC were equivalent to freshly prepared ones. The addition of CD40L or TRANCE/RANKL further improved DC survival. Importantly, we demonstrate that DC can effectively be loaded with antigens (such as Tetanus Toxoid, influenza matrix and melan A peptides) before cryopreservation so that it is now possible to generate antigen-preloaded, frozen DC aliquots that after thawing can be used right away. This is an important advance as both the generation of a standardized DC vaccine under GMP conditions and the carrying out of clinical trials are greatly facilitated.

  7. Three-dimensional nonlinear simulation analysis and bearing capacity of preloaded filling spiral case%充水保压蜗壳三维非线性仿真与承载力研究

    Institute of Scientific and Technical Information of China (English)

    刘波; 刘健华; 伍鹤皋

    2013-01-01

    A three-dimensional nonlinear simulation was made for analysis of a preloaded filling steel spiral case and its overload computation on the basis of an elastoplastic damage model for concrete and the contact nonlinear theory. The analysis focuses on the behavior of spiral case under water pressure increasing, including stress and reinforcement, damage range of surrounding concrete, displacement of generator pier, and deformation of stay ring. The results show that the spiral case alone almost bears all the internal water pressure and its stress increases very rapidly before the internal water pressure reaches the design preloading value. When internal pressure reaches the design value, the damage range of surrounding concrete and the stress of reinforcement become very small. If the overload coefficient exceeds 1.1, the damage range and damage degree on the surrounding concrete increase rapidly, and the deformations of generator pier and stay ring are significant. The spiral case structure still has a certain margin of safety, however, even when this coefficient reaches 1.5. Three-dimensional nonlinear algorithm can produce a simulation closer to the real case, and it should be adopted in design and study of preloaded filling spiral case structure.%基于混凝土弹塑性损伤模型和接触非线性理论,采用仿真算法对充水保压蜗壳进行三维非线性仿真分析并对其进行超载计算,研究内水压力上升过程中钢蜗壳和钢筋应力、外围混凝土损伤区、机墩结构位移和座环变形的变化规律以及结构的超载能力.结果表明,内水压力达到保压值以前,钢蜗壳几乎处于单独承载状态,应力增加较快;在设计内水压力作用下,外围混凝土局部有较小范围的损伤,钢筋应力较小;超载系数大于1.1以后,外围混凝土的损伤区域和损伤程度迅速增大,机墩和座环的变形明显;但超载系数达到1.5时,蜗壳结构仍然具备一定的安全裕度.三维非

  8. Tumour targeting and radiation dose of radioimmunotherapy with {sup 90}Y-rituximab in CD20+ B-cell lymphoma as predicted by {sup 89}Zr-rituximab immuno-PET: impact of preloading with unlabelled rituximab

    Energy Technology Data Exchange (ETDEWEB)

    Muylle, Kristoff [Vrije Universiteit Brussel, MIMA Research Group, Brussels (Belgium); Universite Libre de Bruxelles, Department of Nuclear Medicine, Jules Bordet Institute, Brussels (Belgium); Flamen, Patrick; Guiot, Thomas; Ghanem, Ghanem; Meuleman, Nathalie; Bourgeois, Pierre; Vanderlinden, Bruno; Vaes, Melanie; Bron, Dominique [Universite Libre de Bruxelles, Jules Bordet Institute, Brussels (Belgium); Vugts, Danielle J.; Dongen, Guus A.M.S. van [VU University Medical Centre, Amsterdam (Netherlands); Everaert, Hendrik [Vrije Universiteit Brussel, UZ Brussel, Brussels (Belgium); Vrije Universiteit Brussel, MIMA Research Group, Brussels (Belgium)

    2015-07-15

    To compare using immuno-PET/CT the distribution of {sup 89}Zr-labelled rituximab without and with a preload of unlabelled rituximab to assess the impact of preloading with unlabelled rituximab on tumour targeting and radiation dose of subsequent radioimmunotherapy with {sup 90}Y-labelled rituximab in CD20+ B-cell lymphoma. Five patients with CD20+ B-cell lymphoma and progressive disease were prospectively enrolled. All patients underwent three study phases: initial dosimetric phase with baseline {sup 89}Zr-rituximab PET/CT imaging without a cold preload, followed 3 weeks later by a second dosimetric phase with administration of a standard preload (250 mg/m{sup 2}) of unlabelled rituximab followed by injection of {sup 89}Zr-rituximab, and a therapeutic phase 1 week later with administration of unlabelled rituximab followed by {sup 90}Y-rituximab. PET/CT imaging and tracer uptake by organs and lesions were assessed. With a cold rituximab preload, the calculated whole-body dose of {sup 90}Y-rituximab was similar (mean 0.87 mSv/MBq, range 0.82-0.99 mSv/MBq) in all patients. Without a preload, an increase in whole-body dose of 59 % and 87 % was noted in two patients with preserved circulating CD20+ B cells. This increase in radiation dose was primarily due to a 12.4-fold to 15-fold higher dose to the spleen without a preload. No significant change in whole-body dose was noted in the three other patients with B-cell depletion. Without a preload, consistently higher tumour uptake was noticed in patients with B-cell depletion. Administration of the standard preload of unlabelled rituximab impairs radioconjugate tumour targeting in the majority of patients eligible for radioimmunotherapy, that is patients previously treated with rituximab-containing therapeutic regimens. This common practice may need to be reconsidered and further evaluated as the rationale for this high preload has its origin in the ''prerituximab era''. (orig.)

  9. The real-world dose-relativity of sevelamer hydrochloride and lanthanum carbonate monotherapy in patients with end-stage renal disease.

    Science.gov (United States)

    Wilson, Rosamund J; Keith, Michael S; Preston, Peter; Copley, J Brian

    2013-12-01

    Sevelamer hydrochloride (SH) and lanthanum carbonate (LC) are calcium-free phosphate binders used for the management of hyperphosphatemia in patients with end-stage renal disease (ESRD). The objective of this analysis was to evaluate the real-world dose-relativity between SH and LC monotherapy in US patients with ESRD. This was a post hoc analysis of a 16-week, real-world study (Vemuri et al. in BMC Nephrol 12:49, 2011) of the efficacy of conversion to LC monotherapy from other phosphate binders. The SH:LC dose-relativity ratio, based on the mean daily dose, was calculated in the subset of patients from the Vemuri study who converted from SH to LC monotherapy and had available SH and LC dose data. A total of 950 patients converted from SH to LC monotherapy and had recorded dose data. The post hoc analysis population comprised 691 patients with available dose data for both SH at baseline and LC at week 16. The mean (SD) serum phosphate level at baseline was 5.91 (1.66) mg/dL. After conversion to LC monotherapy for 16 weeks, the mean (SD) serum phosphate level was 5.93 (1.85) mg/dL. The mean (SD) daily baseline SH dose was 7,703 (3,642) mg and the mean (SD) daily LC dose at week 16 was 2,800 (939) mg (9.6 versus 2.8 tablets, respectively; P relativity ratio of 2.8. The median individual patient SH:LC dose-relativity ratio was 2.6 (95% CI 2.6-2.8). Across baseline SH dose subgroups (2,400-4,800, >4,800-7,200, >7,200-9,600, and >9,600 mg/day), the mean daily SH dose was 4,051, 7,047, 9,253, and 13,150 mg, respectively. In comparison, the mean daily LC dose was 2,445-3,156 mg. Thus, patients requiring baseline SH doses >7,200 mg/day (41% of the analysis population) had higher SH:LC dose-relativity ratios of 3.1-4.2 (median individual patient ratios 3.1-4.0). In this post hoc analysis of real-world dose-relativity, the overall SH:LC dose-relativity ratio was 2.8 (median individual patient ratio 2.6 (95% CI 2.6-2.8). These findings are consistent with the World Health

  10. Research on Reinforcement Depth for Foundation Treatment by Vacuum Preloading%真空预压地基处理的加固深度研究

    Institute of Scientific and Technical Information of China (English)

    吴迪; 孙田

    2011-01-01

    With the development of economy in coastal areas, the requirement of soft-soil treatment is much larger. As vacuum preloading has greater advantage for the soft-soil treatment, so it is widely used. But the research on the influencing depth of the vacuum preloading is little, and there is no definite conclusion. Here, the stressing conditions of soil are analyzed from microcosm and macrocosm based on 3-dimensional consolidation. The difference of vacuum pressure causes much deeper influence. Combined with engineering examples, the conclusion is got that the influencing depth of the vacuum preloading could reach to the end of plastic drainage board by analysing the monitoring data.%随着沿海经济的发展,软土处理的需求加大,真空预压处理软土有着比较大的优势,被广泛运用。但在真空预压的影响深度方面,目前学术界研究的较少,没有给出一个明确的结论。文章从土体三维固结出发,分析土体受力不但在微观上的等向受力,在宏观上受到真空压力差的影响,而且真空压力差增加了真空度的影响深度。同时结合工程实例,分析现场监测数据,得出真空预压影响深度可以达到排水板底部。

  11. 考虑摩擦特性时过盈量对轴承预紧力的影响%Influence of interference on bearing preload considering frictional properties

    Institute of Scientific and Technical Information of China (English)

    宁峰平; 姚建涛; 安静涛; 孙锟; 赵永生

    2015-01-01

    针对航天机构中轴承轴向预紧力精确确定的问题,基于静力学和弹性力学,在考虑配合尺寸、摩擦特性的基础上,研究了轴承预紧力与拧紧力矩的关系.利用锁紧螺母拧紧力矩与轴向力的关系,确定施加于轴承上的轴向力;根据摩擦力与摩擦特性及装配尺寸的关系,分析摩擦力对轴向力的截留作用;通过轴承力平衡方程组,对实际预紧力进行理论分析.文中研究了配合尺寸及摩擦特性对预紧力的影响,揭示了不同装配下预紧力随拧紧力矩的变化规律.研究结果表明:对轴承71807C预紧力结果进行分析,发现相同拧紧力矩下,过盈量增0.5μm,轴向力中约有123 N的力被截留;且摩擦系数增加0.05,轴向力截留率增大约13%.过盈量越大,轴承与主轴间摩擦力对轴向力的截留作用越大,预紧力对应的拧紧力矩越大;相比加热炉加热,油槽加热降低了配合区域的摩擦系数,加载相同的拧紧力矩时使轴承预紧力较大.经试验验证,该理论分析可以确定施加的预紧力,又可以提高装配质量.该研究建立预紧力测量的理论计算模型,并可用此模型较精确地确定预紧力,为轴承预紧力设计和装配提供参考.%Bearings are a necessary part of mechanism, and have been widely used in various mechanical systems, such as agricultural machinery, engineering machinery, precision machinery, aerospace machinery. The preload of bearings affects bearing stiffness, rotating precision and service life. Meanwhile, precise determination of bearing preload is the guarantee for the high-precision bearing support system. Related determining preloads have already been analyzed, but the literatures don't consider the interception of friction at fitting area. Space bearing works in space environment, and it is essential to accurately determine the preload. If the initial preload is not selected appropriately or accurately, the changes of preload induced by

  12. Real-world dose-relativity, tablet burden, and cost comparison of conversion between sevelamer hydrochloride/carbonate and lanthanum carbonate monotherapies.

    Science.gov (United States)

    Keith, Michael S; Sibbel, Scott; Copley, J Brian; Wilson, Rosamund J; Brunelli, Steven M

    2014-10-01

    Sevelamer hydrochloride/carbonate (SH/C) and lanthanum carbonate (LC) are noncalcium-based phosphate binders used for the management of hyperphosphatemia in patients with end-stage renal disease (ESRD). The objectives of this study were to examine the dose-relativity, tablet burden, and cost difference of bidirectional conversion between SH/C and LC monotherapy in a large cohort of real-world patients with ESRD. This retrospective cohort study included three 30-day preconversion periods (days -90 to -61, -60 to -31, and -30 to -1) followed by three 30-day postconversion periods (days 1 to 30, 31 to 60, and 61 to 90); day 0 was the index date of conversion. The full analysis population (FAP) comprised two cohorts: SH/C to LC (S-L) converters and LC to SH/C (L-S) converters. The SH/C:LC dose-relativity ratio was assessed in the dose-relativity subset, defined as patients whose serum phosphate levels fell within a caliper range of ± 0.5 mg/dL in the final preconversion (days -30 to -1) and postconversion (days 61 to 90) periods. Tablet burden and phosphate binder costs were assessed in the FAP. Phosphate binder costs were based on average wholesale prices. The FAP contained a total of 303 patients, comprising the S-L (128 patients) and L-S (175 patients) converter cohorts. The dose-relativity subset contained 159 patients, 72 from the S-L cohort and 87 from the L-S cohort. The overall mean SH/C:LC dose-relativity ratio was 2.27 (95% CI, 2.04 to 2.52). In SH/C dose strata >800 to 2400, >2400 to 4800, >4800 to 7200, and >7200 mg/d, overall mean dose-relativity ratios were 0.79 (95% CI, 0.57 to 1.10), 1.45 (95% CI, 1.20 to 1.75), 2.05 (95% CI, 1.75 to 2.39), and 3.24 (95% CI, 2.89 to 3.66), respectively. The overall mean tablet burden was 6.6 tablets per day lower with LC monotherapy than with SH/C monotherapy (95% CI, -7.1 to -6.0; P 7800 mg/d was the inflection point at which conversion to LC resulted in mean cost savings. Patients requiring SH/C >7800 mg/d comprised

  13. Numerical Study Of The Effects Of Preloading, Axial Loading And Concrete Shrinkage On Reinforced Concrete Elements Strengthened By Concrete Layers And Jackets

    Science.gov (United States)

    Lampropoulos, A. P.; Dritsos, S. E.

    2008-07-01

    In this study, the technique of seismic strengthening existing reinforced concrete columns and beams using additional concrete layers and jackets is examined. The finite element method and the finite element program ATENA is used in this investigation. When a reinforced jacket or layer is being constructed around a column it is already preloaded due to existing service loads. This effect has been examined for different values of the axial load normalized to the strengthened column. The techniques of strengthening with a concrete jacket or a reinforced concrete layer on the compressive side of the column are examined. Another phenomenon that is examined in this study is the shrinkage of the new concrete of an additional layer used to strengthen an existing member. For this investigation, a simply supported beam with an additional reinforced concrete layer on the tensile side is examined. The results demonstrate that the effect of preloading is important when a reinforced concrete layer is being used with shear connectors between the old and the new reinforcement. It was also found that the shrinkage of the new concrete reduces the strength of the strengthened beam and induces an initial sliding between the old and the new concrete.

  14. 染料预负载树脂对Cu(Ⅱ)的吸附作用特性%ADSORPTION OF Cu(H) ON DYE-PRELOADED RESIN

    Institute of Scientific and Technical Information of China (English)

    凌晨; 刘福强; 陈泰鹏; 龙超; 吴秋原; 李爱民

    2013-01-01

    通过预负载实验,研究了染料预负载超高交联吸附树脂NDA-150对Cu(Ⅱ)的作用持性.研究结果表明,NDA-150负载酸性蓝29的能力很强,但对Cu(U)吸附极弱.预负载酸性蓝29显著提高了NDA-150对Cu(Ⅱ)的吸附能力,而且随染料负载量的增加,Cu(Ⅱ)的吸附量呈阶段性的线性增长,单位增长倍率先增后降呈现两个阶段.FT-IR和XPS的表征结果显示,固相上染料分子中磺酸基、氨基及羟基参与了对Cu(Ⅱ)的吸附,这为染料预负载增强了树脂对Cu(Ⅱ)的吸附亲和力提供了直接证据.通过Ca(Ⅱ)屏蔽位点实验,表明固相中染料分子主要为Cu(Ⅱ)的吸附提供离子交换位点,此外还提供部分螯合位点.由此可见,超高交联吸附树脂NDA-150有可能同时去除废水中染料及共存重金属离子.%The influence of dye preloaded on the adsorption of Cu(Ⅱ) with hypercrosslinked polymeric resin NDA-150 was studied. Acid Blue 29 preloaded markedly enhanced the adsorption capacity of Cu(Ⅱ) on the resin. With the increase of preloading concentration, the adsorption capacity of Cu(Ⅱ) presented a periodically linear growth, while the enhancement amount contributed by per mole AB (ER) increased first and decreased afterwards. Based on the experimental results of FT-IR and XPS, the adsorption of Cu(Ⅱ) was improved by the interaction of Cu(Ⅱ) with -SOaNa, -NH2, and -OH group in the adsorbed dye molecules. The inside enhancement mechanisms were also examined by performing sites pre-shielding experiment and the results demonstrated that interactions between Cu(Ⅱ) and AB were composed of both ion exchange and coordination. NDA-15 resin can simultaneously remove dye and heavy metal ions from wastewater.

  15. 吹填土真空预压工程中孔压计改进埋设方法的研究%Improvement of Laying Pore Water Pressure Gauge for Vacuum Preloading of Dredger Fill

    Institute of Scientific and Technical Information of China (English)

    徐永辉; 汤明礼; 俞炯奇; 王文双

    2014-01-01

    This paper introduced two laying methods of pore water pressure gauge for vacuum preloading of dredger fill , i . e . traditional method of laying by drilling and an improved one of laying by spile machine , and compared monitoring data of the two methods . Results show that the gauge laid by spile machine will produce excess pore water pressure and the dissipation time of this pressure at deep measuring points is longer than that of pressure gauge laid by drilling . For pore water pressure gauge at shallow levels , using spile machine is convenient and cost -effective;while for pore water pressure gauge below 15m , traditional method of laying by drilling should be adopted .%介绍了吹填土真空预压工程中孔隙水压力计(以下简称“孔压计”)的传统钻孔埋设方法和改进埋设方法-插板机埋设,对使用改进埋设方法的监测数据进行了分析,并与钻孔埋设方法的监测数据进行比较。分析表明,采用插板机埋设的孔压计中产生明显超静孔隙水压力,且深部测点超静孔隙水压力消散所需时间较钻孔埋设的长;对于浅层深度的孔压计可采用插板机埋设,节省施工成本,方便快捷,而超过15 m深度的孔压计埋设则需采用常规钻孔。

  16. A framework for organ dose estimation in x-ray angiography and interventional radiology based on dose-related data in DICOM structured reports

    Science.gov (United States)

    Omar, Artur; Bujila, Robert; Fransson, Annette; Andreo, Pedro; Poludniowski, Gavin

    2016-04-01

    Although interventional x-ray angiography (XA) procedures involve relatively high radiation doses that can lead to deterministic tissue reactions in addition to stochastic effects, convenient and accurate estimation of absorbed organ doses has traditionally been out of reach. This has mainly been due to the absence of practical means to access dose-related data that describe the physical context of the numerous exposures during an XA procedure. The present work provides a comprehensive and general framework for the determination of absorbed organ dose, based on non-proprietary access to dose-related data by utilizing widely available DICOM radiation dose structured reports. The framework comprises a straightforward calculation workflow to determine the incident kerma and reconstruction of the geometrical relation between the projected x-ray beam and the patient’s anatomy. The latter is difficult in practice, as the position of the patient on the table top is unknown. A novel patient-specific approach for reconstruction of the patient position on the table is presented. The proposed approach was evaluated for 150 patients by comparing the estimated position of the primary irradiated organs (the target organs) with their position in clinical DICOM images. The approach is shown to locate the target organ position with a mean (max) deviation of 1.3 (4.3), 1.8 (3.6) and 1.4 (2.9) cm for neurovascular, adult and paediatric cardiovascular procedures, respectively. To illustrate the utility of the framework for systematic and automated organ dose estimation in routine clinical practice, a prototype implementation of the framework with Monte Carlo simulations is included.

  17. Mechanism Study of Port Soft Base Reinforced by Vacuum Preloading%真空预压加固港口软土地基的机理研究

    Institute of Scientific and Technical Information of China (English)

    邵旭

    2015-01-01

    自Kjellman于1952年提出真空预压加固软地基以来,真空预压技术在加固软土地基方面得到广泛应用,但对加固机理仍然有不同的见解。本文结合工程监测资料,对天津某港口软土地基加固区的水势的变化、加固前后总应力变化以及真空卸载之后的地表沉降进行分析,得出负压固结理论可以较好的解释真空预压机理,但对卸压后地表继续沉降这一现象却无法很好解释,这一现象值得进一步探究。%Vacuum preloading reinforcement of soft base has been developed and widely used since the technique was put forward by Kjellman in 1952, but there are still various explanations for the mechanism of reinforcement. Relevant monitoring data was used to analyze the changes of water potential, total stress variation before and after consolidation, and surface settlement after vacuum unloading in a soft base reinforced zone of Tianjin port. The research results showed that negative pressure consolidation theory explained vacuum preloading mechanism well, but the theory did not support the phenomena of surface continuous settlement after unloading, which required further study.

  18. Construction Technologies of Vacuum Preloading Foundation Treatment in Tianjin Port%浅析天津港真空预压法地基处理的主要施工技术

    Institute of Scientific and Technical Information of China (English)

    刘云杰

    2012-01-01

    Based on vacuum preloading soft foundation treatment technologies usually used in Tianjin Port, we emphasize conventional vacuum preloading method and the construction technologies of straight-line vacuum preloading soft foundation treatment, analyze the reason why the expected effect has not been reached in the construction of vacuum preloading soft foundation treatment, propose the detailed resolution and relevant technical measures against the above case, which will provide the reference for similar soft foundation treatment construction.%基于目前天津港常用的真空预压软土地基处理技术,介绍常规真空预压法与直排式真空预压法软土地基处理的施工工艺,着重分析真空预压软土地基处理施工过程中未达预期效果的原因,有针对性地提出解决办法和相应的技术措施,可为类似软土地基处理工程的施工提供参考.

  19. Study status of vacuum preloading soft-soil foundation reinforcing theory and technology%真空预压软土地基加固理论和技术研究现状

    Institute of Scientific and Technical Information of China (English)

    王成保; 苌宽; 张玉国

    2016-01-01

    The paper introduces basic working principles of vacuum preloading method,discusses research status of vacuum preloading soft-soil foundation reinforcing theory and construction technology,analyzes problems existing in vacuum preloading soft-soil foundation construction,and finally points out that:the combination of vacuum preloading technology,monitoring technology and information constructing technology will be good for realizing whole-process construction monitoring,so as to improve social and economic benefits of the project.%介绍了真空预压法的基本工作原理,论述了真空预压软土地基加固理论及施工工艺的研究现状,分析了真空预压软土地基施工中存在的问题,指出将真空预压工艺、监测技术与信息化施工技术相结合,有助于实现施工过程的全面监测,从而提高工程的社会经济效益.

  20. Effect analysis of a soft ground reinforced by a combined vacuum preloading and pneumatic fracturing method%劈裂真空法加固软土地基的效果分析

    Institute of Scientific and Technical Information of China (English)

    章定文; 韩文君; 刘松玉; 杜广印

    2012-01-01

    To overcome the problems of traditional vacuum preloading method, vacuum preloading and pneumatic fracturing are combined to reinforce the performance of ground improvement. The mechanism and construction procedures of the combined method are introduced firstly. The reinforcement effect of the combined method is validated through a pilot highway embankment on soft clay in Jiangsu, China. Comparing to the traditional vacuum preloading method, the combined vacuum preloading and pneumatic fracturing method would enhance the transfer efficiency of vacuum into deep soil layers and accelerate the dissipation of excess pore water pressure. Therefore, the strength increase of soft soil layers improved by the combined method is much larger than that of ground reinforced by the traditional vacuum preloading method. The combined method also can reduce the construction period than the traditional vacuum preloading method. The test results of cone penetration tests and engineering properties tests of soft soils also indicate the superior of the combined vacuum preloading and pneumatic fracturing method.%针对常规真空预压法加固软土地基中存在的问题,介绍了最新研制开发的气压劈裂真空预压法及其施工工艺,并通过现场试验段测试结果分析了劈裂真空法加固软土地基的效果.测试结果表明,较常规真空预压法而言,劈裂真空法可以提高真空荷载向深层土体中的传递效率和加速超静孔隙水压力的消散,既可改善深层软土的加固效果又可加速地基固结,缩短工程工期;劈裂真空法加固地基的沉降效率大于常规真空预压法处理地基,沉降易于收敛,有利于工后沉降的控制.通过加固前后孔压静力触探试验测试结果对比和取样室内试验土性参数变化分析,论证了劈裂真空法加固深层软土地基的有效性和优越性.

  1. Producing Presences

    OpenAIRE

    Mandagará, Pedro

    2008-01-01

    Resenha de MENDES, Victor K.; ROCHA, João Cezar de Castro (Eds.). Producing Presences: branching out from Gumbrecht’s work. Dartmouth, Massachusetts: University of Massachusetts Dartmouth, 2007. (Adamastor book series, 2)

  2. Elasto-viscoplastic model and its application to settlement calculation of soft foundation by preloading treatment%弹黏塑性模型及其在预压处理软基沉降计算中的应用

    Institute of Scientific and Technical Information of China (English)

    扈胜霞; 陈育民; 闫竹玲

    2014-01-01

    In order to obtain an accurate calculation of settlement after construction of soft soil foundation by vacuum preloading, surcharge preloading and vacuum combined surcharge preloading method, stress changes of soft foundation reinforced by the different preloading method is analyzed. Elasto-viscoplastic model which the specific stress path of change is weakened represents stress-strain relation of soft clay. Combined with classical Biot consolidation theory, the finite element method of calculation the settlement of the soft clay improved by preloading method is deduced. The proposed method is verified through the concrete example. The outcomes as follows: (1) Reinforcement mechanism and stress paths are not the same for the different preloading methods. Surcharge preloading method is an anisotropic consolidation process under positive pressure. Vacuum preloading method is the isotropic consolidation process under negative pressure. (2) elasto-viscoplastic model is a rheological model not affected either by transient stress or the specific influence of stress paths. It have superiority when applied it to the soft foundation reinforced by the different preloading method that neither need to consider stress paths nor need to consider the primary and secondary consolidation division. (3) In the Biot consolidation theory, using the elasto-viscoplastic model to reflect the physical equations of soft soil, consolidation settlement and settlement after construction of soft foundation could be accurately calculated. (4) The vertical displacement of soft soils is influenced obviously by viscosity parameter/V and plasticity parameter/V of elasto-viscoplastic model.%以准确计算预压荷载作用下软土路基的工后沉降为目的,分析了不同预压法加固软土地基时土体的应力变化。提出了用弱化应力路径变化过程的弹黏塑性模型表示软黏土的应力-应变关系。结合经典比奥固结理论,推导了预压荷载作用

  3. Application of Natural Language Processing and Network Analysis Techniques to Post-market Reports for the Evaluation of Dose-related Anti-Thymocyte Globulin Safety Patterns.

    Science.gov (United States)

    Botsis, Taxiarchis; Foster, Matthew; Arya, Nina; Kreimeyer, Kory; Pandey, Abhishek; Arya, Deepa

    2017-04-26

    To evaluate the feasibility of automated dose and adverse event information retrieval in supporting the identification of safety patterns. We extracted all rabbit Anti-Thymocyte Globulin (rATG) reports submitted to the United States Food and Drug Administration Adverse Event Reporting System (FAERS) from the product's initial licensure in April 16, 1984 through February 8, 2016. We processed the narratives using the Medication Extraction (MedEx) and the Event-based Text-mining of Health Electronic Records (ETHER) systems and retrieved the appropriate medication, clinical, and temporal information. When necessary, the extracted information was manually curated. This process resulted in a high quality dataset that was analyzed with the Pattern-based and Advanced Network Analyzer for Clinical Evaluation and Assessment (PANACEA) to explore the association of rATG dosing with post-transplant lymphoproliferative disorder (PTLD). Although manual curation was necessary to improve the data quality, MedEx and ETHER supported the extraction of the appropriate information. We created a final dataset of 1,380 cases with complete information for rATG dosing and date of administration. Analysis in PANACEA found that PTLD was associated with cumulative doses of rATG >8 mg/kg, even in periods where most of the submissions to FAERS reported low doses of rATG. We demonstrated the feasibility of investigating a dose-related safety pattern for a particular product in FAERS using a set of automated tools.

  4. Analysis and Effect of Projection Welding Preload Changing under Position Control Mode%位控模式下的凸焊预压力变化分析及影响

    Institute of Scientific and Technical Information of China (English)

    曹园园; 沈景凤; 瞿亚浩; 邓新平; 郑乐辉

    2015-01-01

    研究了凸焊设备的位控模式和预压力参数波动原因,量化分析了压力参数变化范围;采用定电流和时间参数改变电极压力参数的方法进行了凸焊实验,使用微电脑拉力试验机测试焊点焊接强度,基于实验结果用MATLAB拟合预压力与焊点强度的高次曲线。基于拟合曲线确定实验电流、时间参数下的最佳预压力,结合实验拟合曲线和量化的压力参数浮动范围得出压力浮动造成的焊点结合强度降低范围;提出转矩控制方式控制预压力,以消除电极压力浮动造成的焊点质量不稳定。%The preload of the automatic projection welding equipment under position control mode changes over time and affects the stability of the welding quality .The position control mode of the welding equipment and the reasons of pressure fluctuations were studied;the range of preload was calculated;with current and time parameters fixed and preload changed , experiments were conducted ,then welding strength was tested by micro tensile testing machine;curves of preload and bonding strength were fitted with MATLAB based on the results of experiments .Under the fixed current and time conditions ,the best welding preload was found according to the fitting curve ,and the reduce of the bonding strength was determined too ;at last ,the torque control mode was proposed to eliminate the unstable welding quality caused by the change of preload .

  5. Comparative analysis of international standards for the fatigue testing of posterior spinal fixation systems: the importance of preload in ISO 12189.

    Science.gov (United States)

    La Barbera, Luigi; Ottardi, Claudia; Villa, Tomaso

    2015-10-01

    compared with the previous model where the precompression was not considered. Neglecting the initial preload due to the assembly of the overall construct according to ISO 12189 standard could lead to an overestimation of the stress on the rods up to 50%. To correctly describe the state of stress on the posterior spinal fixator, tested according to the ISO procedure, it is important to take into account the initial preload due to the assembly of the overall construct. Copyright © 2015 Elsevier Inc. All rights reserved.

  6. A Computational Tool for Testing Dose-related Trend Using an Age-adjusted Bootstrap-based Poly-k Test

    Directory of Open Access Journals (Sweden)

    Hojin Moon

    2006-08-01

    Full Text Available A computational tool for testing for a dose-related trend and/or a pairwise difference in the incidence of an occult tumor via an age-adjusted bootstrap-based poly-k test and the original poly-k test is presented in this paper. The poly-k test (Bailer and Portier 1988 is a survival-adjusted Cochran-Armitage test, which achieves robustness to effects of differential mortality across dose groups. The original poly-k test is asymptotically standard normal under the null hypothesis. However, the asymptotic normality is not valid if there is a deviation from the tumor onset distribution that is assumed in this test. Our age-adjusted bootstrap-based poly-k test assesses the significance of assumed asymptotic normal tests and investigates an empirical distribution of the original poly-k test statistic using an age-adjusted bootstrap method. A tumor of interest is an occult tumor for which the time to onset is not directly observable. Since most of the animal carcinogenicity studies are designed with a single terminal sacrifice, the present tool is applicable to rodent tumorigenicity assays that have a single terminal sacrifice. The present tool takes input information simply from a user screen and reports testing results back to the screen through a user-interface. The computational tool is implemented in C/C++ and is applied to analyze a real data set as an example. Our tool enables the FDA and the pharmaceutical industry to implement a statistical analysis of tumorigenicity data from animal bioassays via our age-adjusted bootstrap-based poly-k test and the original poly-k test which has been adopted by the National Toxicology Program as its standard statistical test.

  7. The central role of vascular extracellular matrix and basement membrane remodeling in metabolic syndrome and type 2 diabetes: the matrix preloaded

    Directory of Open Access Journals (Sweden)

    Tyagi Suresh C

    2005-06-01

    Full Text Available Abstract The vascular endothelial basement membrane and extra cellular matrix is a compilation of different macromolecules organized by physical entanglements, opposing ionic charges, chemical covalent bonding, and cross-linking into a biomechanically active polymer. These matrices provide a gel-like form and scaffolding structure with regional tensile strength provided by collagens, elasticity by elastins, adhesiveness by structural glycoproteins, compressibility by proteoglycans – hyaluronans, and communicability by a family of integrins, which exchanges information between cells and between cells and the extracellular matrix of vascular tissues. Each component of the extracellular matrix and specifically the capillary basement membrane possesses unique structural properties and interactions with one another, which determine the separate and combined roles in the multiple diabetic complications or diabetic opathies. Metabolic syndrome, prediabetes, type 2 diabetes mellitus, and their parallel companion (atheroscleropathy are associated with multiple metabolic toxicities and chronic injurious stimuli. The adaptable quality of a matrix or form genetically preloaded with the necessary information to communicate and respond to an ever-changing environment, which supports the interstitium, capillary and arterial vessel wall is individually examined.

  8. The impact of left ventricular preload reduction on cardiac pulsed doppler indices during hemodialysis and its relation to intra-dialysis hypotension: A pulsed doppler study

    Directory of Open Access Journals (Sweden)

    Alarrayed Sameer

    2009-01-01

    Full Text Available Fluid status in the body plays an important role on left ventricular (LV filling in patients with end-stage renal disease (ESRD on regular hemodialysis (HD, and plays a role in intra-dialysis hemo-dynamic derangement. Fifty-two patients with ESRD on regular HD, including 34 males with a mean age of 45.5 ± 13 years (range 18-72 years, were studied. All patients underwent Echo-pulsed Doppler study before and immediately after a HD session. The Echo Doppler indices noted were: LV cavity dimension and wall thickness, LV ejection fraction (LVEF%, trans-mitral early diastolic filling velocity (E wave, atrial filling diastolic velocity (A wave, E/A ratio, Deceleration Time (DT of E wave, Isovolumic relaxation time (IVRT, Aortic Velocity Integral (AVI and Inferior Vena Cava Diameter (VCD at expiration. Patients were divided into two groups according to the amount of net ultra filtrate loss after HD. Group I comprised of 25 patients with fluid loss of < 2 liters, and Group II had 27 patients with fluid loss > 2 liters. During the HD session, each patient was observed for the development of acute clinical events such as arterial hypotension (systolic BP less than 90 mmHg, chest pain and arrhythmias. There was a significant difference between the two groups in the mean values, pre- and post- HD, of reduction of E wave velocity (p< 0.01, the reduction of E/A ratio (p< 0.05, the increment in DT of E wave (p< 0.05, the reduction in AVI (p< 0.01 and the reduction of VCD (p< 0.05. There was no significant difference between the groups in the reduction of A wave velocity and the reduction of IVRT. Among the study patients, 11 (21% developed systolic hypo-tension during HD. The pre-dialysis mean values of E/A ratio and DT of E wave in patients who developed hypotension compared to those who did not was 0.7 ± 0.2 vs 1.1 ± 0.2.1 (p< 0.001 and 246 ± 40 vs 224 ± 34 msec (p< 0.05, respectively. Our study suggests that preload reduction in patients with ESRD on

  9. Analytical theory of soft ground consolidation under vacuum preloading combined with electro-osmosis%真空预压联合电渗法加固软基的固结方程

    Institute of Scientific and Technical Information of China (English)

    徐伟; 刘斯宏; 王柳江; 汪俊波

    2011-01-01

    An analytical consolidation theory of soft ground under vacuum preloading combined with electro-osmosis was established based on the Terzaghi' s consolidation theory and the Esrig' s electro-osmotic consolidation theory. The analytical solutions of the excess pore water pressure of the soft ground during consolidation process were obtained.Through an example, the development of the excess pore water pressure with the time and its distribution rules between the electrodes induced by the vacuum preloading combined with electro-osmosis were analyzed. Model tests on soil samples under the vacuum preloading combined with electro-osmosis were carried out. The observed water content of the soil samples after tests agree with those derived by means of the analytical solutions of the excess pore water pressure.They have similar distribution rules, indicating that the analytical consolidation theory is rational.%在Terzaghi固结理论和Esring电渗固结理论的基础上推导真空预压联合电渗法加固软基的二维固结方程,给出了真空预压联合电渗加固过程中超静孔隙水压力的解析解.通过算例,分析了真空预压联合电渗引起的土体超静孔隙水压力随时间的发展以及在电极间的分布规律.进行了真空预压联合电渗的模型试验,试验后实测土体含水率与通过超静孔隙水压力解析解推算出的含水率基本吻合,且具有相似的分布规律,表明该固结方程是合理的.

  10. 直排式真空预压法在软基处理工程中的应用%Application of Straight-line Vacuum Preloading Method in Soft Base Reinforcement

    Institute of Scientific and Technical Information of China (English)

    李新召; 王桂松; 张晓杰

    2014-01-01

    The conventional vacuum preloading method is optimized to be straight-line vacuum preloading method in the project,which gives up medium-coarse sand,drain boards and filters are connected to reduce vacuum degree transmission path,decrease energy consumption and reach the planned effect. The theoretical computation and detection result prove that the application of straight-line vacuum preloading method saves cost and realizes reasonable construction period in contrast with the conventional technology. The improved soft base detection results meet the engineering requirements for soft soil compression coefficient,water content,void ratio,consolidation degree,settlement rate and vane-shear strength.%本工程采用的直排式真空预压法,是对传统真空预压工艺的优化。即取消中粗砂,排水板直接连接在滤管上,缩短真空度传递路径,降低能耗,取得预期效果。理论计算和检测均表明:直排式真空预压相对于传统真空预压工艺,可节约成本,工期合理;地基处理后检测结果表明:处理后软土压缩系数、含水率、孔隙比降低,固结度、沉降速率和十字板抗剪强度等均满足要求。

  11. COMPARATIVE STUDY OF 6% HYDROXYETHYL STARCH (450/0 . 7 AND RINGER’S LACTATE AS PRELOADING FLUID FOR PREVENTION OF HYPOTENSION DURING SPINAL ANESTHESIA IN ELECTIVE CESAREAN DELIVERY

    Directory of Open Access Journals (Sweden)

    Javid

    2015-09-01

    Full Text Available We compared the efficacy of volume preloading with Ringer’s Lactate and Hydroxyethyl starch (HEAS 6% 450/0 . 7 on the onset and incidence of spinal - induced hypotension in elective cesarean delivery . 60 healthy parturients scheduled for elective cesarean se ction under spinal anesthesia were selected for the study . Group A was preloaded with 1000ml of RL while as group B preloaded with 500ml of 6% HEAS (450/0 . 7 over a period of 10 minutes just prior to the administration of spinal anaesthesia . Immediately af ter the preloading period, subarachnoid block was instituted with 2 . 5ml of Bupivacaine 0 . 5% (heavy at L3 - L4 or L4 - L5 interspace using 26 Gauge Quinke’s spinal needle in sitting position . The patient were then positioned supine with left lateral tilt . Ade quate block was obtained and height of block was tested by pinprick method using blunt needle . Hypotension following spinal anaesthesia was treated with 6 mg bolus doses of Ephedrine and additional rapid infusion of Ringer’s lactate solution . All were admi nistered supplemental oxygen 5L/min by venturi mask throughout the period of surgery . Intraoperatively, heart rate, systolic blood pressure, diastolic blood pressure and mean arterial pressure were monitored every 2 minutes for the first 20 minutes and eve ry 5 minutes thereafter till the end of surgery . Spo2 and ECG were monitored continuously throughout the period of surgery . In addition, height of the block, amount of blood loss, amount of vasopressor required, and amount of i . v fluids used intraoperative ly and any allergic reactions to i . v fluids were noted . All parturients received 10 IU of oxytocin i . v infusion after delivery of baby . These observations were analyzed to get information on the onset and incidence of hypotension, intraoperative requiremen ts of Ephedrine, and i . v fluids, and incidence of adverse effects like nausea and / or vomiting . The incidence of hypotension in group A was 60

  12. Study on flexural performance of preloaded wood beams strengthened with CFRP sheets%预载作用下碳纤维布加固木梁抗弯性能试验

    Institute of Scientific and Technical Information of China (English)

    张莉; 赵尘; 朱少云

    2011-01-01

    Bending experiments on seven rectangular wood beams were performed in this study. The influence of preload level and carbon-fiber-reinforced-polymer ( CFRP) sheet number on the flexural behavior was evaluated. The flexural behavior was examined in terms of failure characteristics, load-deflection relationship, cross-section strain distribution, and ultimate bearing capacity. Hie results indicated that reinforcement with CFRP sheet was an effective technique. The ultimate bearing capacity of wood beams strengthened with one layer of CFRP sheet increased about 6.2% -12.1% and the effect was more obvious with two layers of CFRP sheet. At the same time, the preload level was found to have a noticeable influence on the ultimate bearing capacity of strengthened wood beams.%通过7组矩形木梁抗弯试验,探讨了不同预载程度和碳纤维布层数对加固效果的影响,研究了木梁的破坏特征、荷载-挠度关系、应变分布和极限承载力.试验结果表明,采用碳纤维布提高木梁抗弯承载力的方法是有效的,粘贴1层碳纤维布的木梁极限承载力提高6.2%~12.1%,粘贴2层的效果更加明显,同时我们发现预载程度对木梁极限承载力的影响不容忽视.

  13. 埋入式微型孔压计在真空预压模型试验中的应用%Application of embedded micro pore water pressure gauges in model tests of vacuum preloading

    Institute of Scientific and Technical Information of China (English)

    韩文君; 刘松玉; 章定文; 朱小丹

    2012-01-01

    孔隙水压力的测量和分析对研究真空预压法具有重要意义。实际工程中的孔隙水压力计已经得到广泛应用,但是由于制造工艺上的限制,目前能用于真空预压室内模型试验的微型孔隙水压力计国内还比较少见。本文介绍了两种埋入式微型孔隙水压力计,利用自行设计和组装的仪器进行孔隙水压力计负压量程的标定,并进行了真空预压室内模型试验,从而评价微型孔隙水压力计的测量效果。标定试验结果表明,两种埋入式微型孔隙水压力计能准确地测量正压,并且对负压的测量结果精度也非常高。应用试验结果表明,排水板中的微型孔隙水压力计测量结果与膜下真空度变化规律一致;利用土体中的孔隙水压力计测量结果计算得到土体的固结度略小于由实测沉降数据计算的固结度,但变化规律一致,这充分说明这两种微型孔隙水压力计能够精确地测量真空预压中的负孔隙水压力。%The measurement and analysis of pore water pressure is of great significance for the studies on the vacuum preloading. In practical engineering, the pore water pressure gauge has been widely used. However, due to restrictions of the manufacturing process, the micro pore water pressure gauge that can be used for vacuum preloading model tests in laboratory is still relatively rare in China. Two kinds of embedded micro-pore water pressure gauges are introduced. The design, fabrication and assembly of a new laboratory apparatus for the investigation of the fundamental behavior of the embedded micro-pore water pressure gauge measuring negative excess pore water pressure are presented in this paper. The results from the calibration tests show that the two kinds of embedded micro-pore water pressure gauges can accurately measure the pressure. The results from the model tests show that in micro-drain pore water the variation of the pressure measured by micro pore water

  14. Brookhaven Linac Isotope Producer

    Data.gov (United States)

    Federal Laboratory Consortium — The Brookhaven Linac Isoptope Producer (BLIP)—positioned at the forefront of research into radioisotopes used in cancer treatment and diagnosis—produces commercially...

  15. Producing Against Poverty

    NARCIS (Netherlands)

    Ypeij, Annelou

    2000-01-01

    Producing against Poverty is an anthropological research on micro-entrepreneurs in Lima, Peru. It analyses the way micro-producers accumulate capital. The anthropological approach of the book starts with an analysis of the daily lives of the micro-producers. Its gender approach makes a comparison be

  16. Preloading Monitoring Methods for Large Oil Tank in Algeria 5 MTPY Condensate Project%阿尔及利亚凝析油项目大型油罐充水预压动态监控方法

    Institute of Scientific and Technical Information of China (English)

    祖兴和; 周旭荣

    2009-01-01

    简要介绍了阿尔及利用亚凝析油项目场区工程地质条件、充水预压的主要特点与充水预压的主要动态监控措施.该工程经充水预压施工与动态监测控制,保证了大型油罐设计与施工的经济合理、安全可靠,避免了重大的建设资金浪费和工期损失.该工程的成果与经验对软土地基上的大型油罐的设计、施工和监测等具有重要的参考意义.%By the dynamic monitoring & controlling for the large oil tanks, the engineering & construction of the tanks is economic, reasonable, safe & reliable in Algeria 5MTPY Condensate roject. Big waste is avoided on construction fund and time in the project. The site engineering geological condition, main characteristics of preloading, main dynamic monitoring & controlling measures are introduced briefly in this paper. The fruit and experience in the project has important reference sense to the engineering, construction & monitoring of large oil tanks in soft soil area.

  17. Study on Soft Roadbed Reinforcement Based on Vacuum Combined Surcharge Preloading Method%基于真空联合堆载预压法的软土路基加固技术问题研究

    Institute of Scientific and Technical Information of China (English)

    李鹏

    2015-01-01

    因软粘土具有高含水量、大孔隙、低强度、高压缩性、低透水性等特点,导致其土层压缩沉降量大,排水固结缓慢,沉降稳定时间很长,地基稳定性差,难以满足工程需要。本文以青岛高新区双高公路工程为例,对真空联合堆载预压法加固公路软基的机理、特点及加固效果进行了深入研究,为工程应用提供参考。%Characterized by high water content、macroporosity、low intensity、high compressibility and low permeabilit-y, the soft clay is easy to lead to big soil compression settlement , slow drainage consolidation, long settlement stable time, poor reliability. It doesn't meet the needs of the engineering. This paper analyzes the mechanism、characteristics and reinforcement effect of vacuum combined surcharge preloading method about the expressway of Qingdao high-tech zone. The results can be referred to for engineering application.

  18. Application of vacuum preloading method in Tianjin coastal soft foundation consolidation%真空预压浅层处理法在天津沿海软基处理中的应用研究

    Institute of Scientific and Technical Information of China (English)

    刘仲军

    2012-01-01

    The comparative analysis of shallow layer approach and conventional deep layer approach of vacuum preloading method were conducted, and the advantages for using shallow layer approach into Tianjin coastal soft foundation were analyzed. Two approaches were applied into soft foundation consolidation of Tianjin Cruise Terminal Project. The results show that:the shallow layer approach is better than conventional deep layer approach for soft foundation consolidation in physical mechanics performance. Therefore, the application of the shallow layer approach into Tianjin coastal soft foundation consolidation is feasible.%通过对比分析真空预压法中的浅层处理方式和常规深层处理方式的特点,分析了浅层处理方式应用于天津沿海软基加固工程中的优势之处,并结合工程实例对2种方式处理天津邮轮码头地基的效果进行了比较研究.研究结果表明:软基加固后土体的物理力学性质方面,浅层处理法要略优于常规处理法.因此,真空预压法浅层处理方式在天津沿海工程淤泥质地基处理中具有可行性.

  19. Influence of Preload and Speed on Dynamic Contact Characteristics of High Speed Angular Contact Ball Bearings%预紧及转速对角接触球轴承动态接触特性的影响*

    Institute of Scientific and Technical Information of China (English)

    罗小百; 肖曙红; 雷枝武; 吴利杰

    2013-01-01

    基于拟动力学、套圈控制理论建立了角接触球轴承的刚度、旋滚比数学模型。以此为基础利用Matlab编程,计算了轴承钢球与套圈的接触角、陀螺力矩、旋滚比和轴承刚度,分析了高速工况下预紧载荷、转速对轴承各接触参数的影响规律。%Based on the sub-dynamics analysis theory and race’ s control theory, this paper introduces the mathematic model of the angular contact bearing rigidity and ratio of revolution and rolling firstly. Then calculates the ball contact angle, gyro moment, ratio of revolution and rolling, and bearing rigidity by programming in Matlab, and the numerical method. Finally analyzes the influence of the preload and rotary speed on the dynamic parameters of high speed angular contact ball bearings.

  20. L-Phenylalanine preloading reduces the (10)B(n, α)(7)Li dose to the normal brain by inhibiting the uptake of boronophenylalanine in boron neutron capture therapy for brain tumours.

    Science.gov (United States)

    Watanabe, Tsubasa; Tanaka, Hiroki; Fukutani, Satoshi; Suzuki, Minoru; Hiraoka, Masahiro; Ono, Koji

    2016-01-01

    Boron neutron capture therapy (BNCT) is a cellular-level particle radiation therapy that combines the selective delivery of boron compounds to tumour tissue with neutron irradiation. Previously, high doses of one of the boron compounds used for BNCT, L-BPA, were found to reduce the boron-derived irradiation dose to the central nervous system. However, injection with a high dose of L-BPA is not feasible in clinical settings. We aimed to find an alternative method to improve the therapeutic efficacy of this therapy. We examined the effects of oral preloading with various analogues of L-BPA in a xenograft tumour model and found that high-dose L-phenylalanine reduced the accumulation of L-BPA in the normal brain relative to tumour tissue. As a result, the maximum irradiation dose in the normal brain was 19.2% lower in the L-phenylalanine group relative to the control group. This study provides a simple strategy to improve the therapeutic efficacy of conventional boron compounds for BNCT for brain tumours and the possibility to widen the indication of BNCT to various kinds of other tumours.

  1. Boosting Farm Produce Supply

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    In the wake of escalating inflation,securing farm produce supply and stablizing grain prices could help to alleviate economic pressure The Chinese Government has pledged to secure a stable supply of farm produce.According to a document released after the annual Central Rural Work Conference held on December 22-23 in Beijing,preventing short supplies of farm produce and avoiding"ex-

  2. Biologically produced sulfur

    NARCIS (Netherlands)

    Kleinjan, W.E.; Keizer, de A.; Janssen, A.J.H.

    2003-01-01

    Sulfur compound oxidizing bacteria produce sulfur as an intermediate in the oxidation of hydrogen sulfide to sulfate. Sulfur produced by these microorganisms can be stored in sulfur globules, located either inside or outside the cell. Excreted sulfur globules are colloidal particles which are stabil

  3. Agricultural Producer Certificates

    Data.gov (United States)

    Montgomery County of Maryland — A Certified Agricultural Producer, or representative thereof, is an individual who wishes to sell regionally-grown products in the public right-of-way. A Certified...

  4. Methods for producing diterpenes

    DEFF Research Database (Denmark)

    2015-01-01

    The present invention discloses that by combining different di TPS enzymes of class I and class II different diterpenes may be produced including diterpenes not identified in nature. Surprisingly it is revealed that a di TPS enzyme of class I of one species may be combined with a di TPS enzyme...... of class II from a different species, resulting in a high diversity of diterpenes, which can be produced....

  5. Three-Dimensional Nonlinear Bearing Capacity Analysis of Preloaded Filling Spiral Case%充水保压蜗壳结构联合承载三维非线性分析

    Institute of Scientific and Technical Information of China (English)

    郭涛; 张立翔; 罗竹梅

    2016-01-01

    In order to analyze the cracking treds of concrete,a three -dimensional nonlinear method base on Drucker-Prager model was applied to calculate the elastoplastic damage distribution of preloade filling spiral case structure.The analysis focuses on the damage range of surrounding concrete under overload.The results show that the damage range of surrounding concrete is very small when the internal water pressure reaches the de-sign preloading value.If the overload coefficient exceeds 1.15,the damage range and damage degree on the con-crete increase rapidly.When the coefficient reaches 1.7,the penetrating crack appeared.The top of stay ring, the roots of turbine pier and the entrance of spiral case is the dangerous position of crack initiation and propaga-tion,which should be given more attention.The Drucker-Prager damage plasticity model can well simulation the cracking trends of concrete,and it is very effective to calculate the bearing capacity of concrete structure.%基于Drucker-Prager的弹塑性混凝土本构模型,采用简化算法对充水保压蜗壳进行三维非线性分析,通过超载计算,研究内水压力上升过程中蜗壳外围混凝土可能发生塑性区的危险部位及其塑性区扩展情况.结果表明,在设计内水压力作用下,外围混凝土仍处于弹性工作状态,结构的强度安全性较高;当超载系数大于1.15以后,混凝土塑性区出现并随着内水压力的增加,塑性区迅速增大,当超载系数达到1.7时,出现大面积贯穿性塑性区.座环上下环板附近、机墩根部与水轮机层交界处,由于混凝土较薄,而且属于应力集中区域,始终是塑性区出现的危险部位,应该给予重点关注.另外,当内水压力增高时,蜗壳进口直管段右侧腰部也是塑性区扩展的薄弱部位.

  6. Experimentally produced calf pneumonia.

    Science.gov (United States)

    Gourlay, R N; Howard, C J; Thomas, L H; Stott, E J

    1976-03-01

    Experimental pneumonia was produced in calves by the endobronchial inoculation of pneumonic lung homogenates. Irradiated homogenates produced minimal pneumonia. Ampicillin treatment of the homogenates and the experimental calves reduced the extent of pneumonia. Treatment with tylosin tartrate prevented experimental pneumonia. These results suggest that the total pneumonia was due to organisms susceptible to tylosin tartrate and that the residual pneumonia remaining after ampicillin treatment was due to organisms susceptible to tylosin tartrate but not to ampicillin. Of the organisms isolated from the lungs, the ones in this latter category most likely to be responsible are Mycoplasma dispar and ureaplasmas (T-mycoplasmas).

  7. Producing CD-ROMs.

    Science.gov (United States)

    Hyams, Peter, Ed.

    1992-01-01

    This issue presents 11 articles that address issues relating to the production of CD-ROMs. Highlights include current uses of CD-ROM; standards; steps involved in producing CD-ROMs, including data capture, conversion, and tagging, product design, and indexing; authoring; selecting indexing and retrieval software; costs; multimedia CD-ROMs; and…

  8. Producing superhydrophobic roof tiles

    Science.gov (United States)

    Carrascosa, Luis A. M.; Facio, Dario S.; Mosquera, Maria J.

    2016-03-01

    Superhydrophobic materials can find promising applications in the field of building. However, their application has been very limited because the synthesis routes involve tedious processes, preventing large-scale application. A second drawback is related to their short-term life under outdoor conditions. A simple and low-cost synthesis route for producing superhydrophobic surfaces on building materials is developed and their effectiveness and their durability on clay roof tiles are evaluated. Specifically, an organic-inorganic hybrid gel containing silica nanoparticles is produced. The nanoparticles create a densely packed coating on the roof tile surface in which air is trapped. This roughness produces a Cassie-Baxter regime, promoting superhydrophobicity. A surfactant, n-octylamine, was also added to the starting sol to catalyze the sol-gel process and to coarsen the pore structure of the gel network, preventing cracking. The application of ultrasound obviates the need to use volatile organic compounds in the synthesis, thereby making a ‘green’ product. It was also demonstrated that a co-condensation process effective between the organic and inorganic species is crucial to obtain durable and effective coatings. After an aging test, high hydrophobicity was maintained and water absorption was completely prevented for the roof tile samples under study. However, a transition from a Cassie-Baxter to a Wenzel state regime was observed as a consequence of the increase in the distance between the roughness pitches produced by the aging of the coating.

  9. Method of producing imines

    Science.gov (United States)

    Sithambaram, Shanthakumar; Son, Young-Chan; Suib, Steven L.

    2008-04-08

    A method for forming an imine comprises reacting a first reactant comprising a hydroxyl functionality, a carbonyl functionality, or both a hydroxyl functionality and a carbonyl functionality with a second reactant having an amine functionality in the presence of ordered porous manganese-based octahedral molecular sieves and an oxygen containing gas at a temperature and for a time sufficient for the imine to be produced.

  10. Acousto-Elastic Fastener Preload Indicator

    Science.gov (United States)

    1978-10-01

    Selection A. R. Robinson, Torque Wrench Integration, Calibration Standard Design W. A. Rogers , Finite Elements Calculations R. A. Carmin, Non Uniform...Waltham, MA 02154. 6. Digital Thickness Gage, Automation Industries, Inc., Sperry Division, Shelter Rock Road, Danbury, CT 06810. 7. Ultrasonic Digital

  11. 复材布约束有预压荷载的型钢混凝土矩形短柱轴压性能试验研究∗%EXPERIMENTAL STUDY OF THE AXIAL COMPRESSIVE PERFORMANCE OF PRELOADED STEEL REINFORCED CONCRETE RECTANGULAR SHORT COLUMNS CONFINED BY CARBON FIBER REINFORCED POLYMER LAMINATES

    Institute of Scientific and Technical Information of China (English)

    高鹏; 殷强; 王健; 宗文; 洪丽

    2016-01-01

    为研究碳纤维布约束型钢混凝土矩形短柱的轴心受压破坏机理和受力性能,对15个试件进行了轴向静力加载试验,考虑了碳纤维布层数和预压荷载水平两个参数。试验结果表明:所有的约束型钢混凝土柱均以碳纤维布断裂为破坏标志,破坏前有明显的预兆。施加在约束柱上的峰值荷载随碳纤维布层数增加而提高,包裹2层布提高了58�36%,3层提高了64�51%;预压荷载的存在会减弱碳纤维布对短柱的约束效果,且随着预压荷载水平的提高,布的有效拉应变不断减小,柱承载能力不断降低。最后建立了碳纤维布有效拉应变与预压荷载水平的关系式,提出了构件轴压承载能力计算式,计算结果与试验结果吻合良好。%In order to study the axial compressive behavior of preloaded steel reinforced concrete ( SRC) rectangular short columns confined by carbon fiber reinforced polymer ( CFRP) laminates, a total of 15 specimens were designed to conduct the experiment that considered two variables including preload level and CFRP layers. The experimental results indicated that all of the confined columns failed directly in the fracture of CFRP laminates, in which there was an obvious sign before the ultimate state. Compared with the unconfined SRC column, the peak load of the confined column with 2 layers of CFRP increased by 58�36%, while by 64�51% with 3 layers. In addition, the preload decreased the effectiveness of confinement, both of the working strain of CFRP and the peak load of columns decreased with the increasing of the preload level. The relationship between the effective circumferential strain of CFRP and preload level was proposed. The theoretical formula of the axial bearing capacities of preloaded SRC rectangular columns confined by CFRP was proposed, and the calculation results agreed well with the test results.

  12. Solutions for Groundwater Level in Effected Zone of Soft Ground Under Vacuum Preloading%真空预压影响区地下水位变化的计算

    Institute of Scientific and Technical Information of China (English)

    张仪萍; 李剑; 严露

    2011-01-01

    The analytical solution for ground water level changes in affected zone of soft ground with vacuum preloading was investigated by using one-dimensional unsteady seepage flow model. Using average groundwater zero pressure line in reinforced zone as the boundary condintion, solution of one-dimensional unsteady seepage flow model was conducted when reducation of water pressure in drainage boundary was changing over time. An example of the calculation based on the analyticalsolution was given to analyze the influence of permeability coefficient in affected zone and drainage rate in reinforcement area on groundwater level in affected zone. The results show that it is necessary to use unsteady seepage flow model to analysis soft clay that permeability is low and the permeability of soil in affected zone was the main factor to influene groundwater level outside reinforcement area. Drainage flow rate in reinforcement area only influence the time from unsteady seepage flow to steady flow but had less impact on flow range.%基于渗流理论,采用一维非稳定渗流模型,阐述了边界为变水头条件下的真空预压影响区地下水位变化的解析方法.利用加固区平均地下水零压线作为边界条件,推导了排水边界上降深随时间变化的一维非稳定渗流,得出影响区土体中地下水位的变化规律.通过算例,分析了影响区渗透系数以及预压区排水速率等因素对影响区地下水位的影响.结果表明,对于渗透性较低的软黏土而言,采用非稳定渗流分析是必要的,影响区渗透系数是区外地下水位变化的主要因素.预压区排水速率只影响区外渗流趋于稳定的时间,对渗流范围的影响较小.

  13. Produce Sanitation System Evaluation

    Science.gov (United States)

    2011-05-01

    the  amount in each product’s case.     Table 2: Produce Packaging  Product   Amount  Tomatoes  25 lb  Broccoli   20 lb  Iceberg lettuce  6 heads...aftertaste through it computer-based cleansing process and use of a citrus-based “green” cleansing product . Microbiologists from CFD performed...several tests of bacteria counts and pathogen log rate reductions of various FF&V products before and after they passed through the sanitizing sink process

  14. Producing Civil Society

    DEFF Research Database (Denmark)

    Feldt, Liv Egholm; Hein Jessen, Mathias

    Since the beginning of the 1990’s, civil society has attracted both scholarly and political interest as the ‘third sphere’ outside the state and the market not only a normatively privileged site of communication and ‘the public sphere’, but also as a resource for democratization processes...... of the century. 2, the laws and strategies of implementing regarding the regulation of civil societal institutions (folkeoplysningsloven) since the 1970’s this paper shows how civil society in 20th century Denmark was produced both conceptually and practically and how this entailed a specific vision and version...

  15. Power Producer Production Valuation

    Directory of Open Access Journals (Sweden)

    M. Kněžek

    2008-01-01

    Full Text Available The ongoing developments in the electricity market, in particular the establishment of the Prague Energy Exchange (PXE and the associated transfer from campaign-driven sale to continuous trading, represent a significant change for power companies.  Power producing companies can now optimize the sale of their production capacities with the objective of maximizing profit from wholesale electricity and supporting services. The Trading Departments measure the success rate of trading activities by the gross margin (GM, calculated by subtracting the realized sales prices from the realized purchase prices and the production cost, and indicate the profit & loss (P&L to be subsequently calculated by the Control Department. The risk management process is set up on the basis of a business strategy defining the volumes of electricity that have to be sold one year and one month before the commencement of delivery. At the same time, this process defines the volume of electricity to remain available for spot trading (trading limits. 

  16. Analysis on Consolidation of Hydraulically Reclaimed Soil under Vacuum Preloading with Change of Permeability%真空预压下考虑渗透系数变化的吹填土地基固结分析

    Institute of Scientific and Technical Information of China (English)

    牛飞; 邱长林; 闫澍旺; 纪玉诚

    2013-01-01

    Hydraulically reclaimed soil's water content is more than 80% with high void ratio. When the hydraulically reclaimed soil is strengthened by vacuum preloading,its void ratio varies greatly,which makes its permeability change greatly. Reclaimed soil's consolidation properties and mechanical parameters under vacuum loading are obtained by laboratory vacuum model test. Using the modified Cambridge model,and taking into account the relation between permeability coefficient and void ratio,Biot's consolidation theory is used to analysis the pore pressure and void ratio of reclaimed soil in the model tank under vacuum loading. Compared with measured results,the calculation results show that this model can well be used to analyze the reclaimed soil's consolidation under vacuum loading. The calculation results also show that the soil close to the prefabricated drains is compacted in a very short time, resulting in the slow consolidation of the reclaimed soil. If the degree of consolidation is calculated by using a model that doesn't consider the change of permeability, the calculated valves will be higher than the calculated results by using a model that considers the change of permeability. Therefore,the consideration of the change of permeability during the consolidation of reclaimed soil foundation is necessary.%  吹填土的含水率高达80%以上,孔隙比大。使用真空预压法加固吹填土,土体孔隙比变化很大,土体的渗透系数也随之发生很大的变化。通过室内真空模型试验获取土样在真空荷载下的固结规律和力学参数。采用修正的剑桥模型,并考虑渗透系数随孔隙比变化的非线性关系,运用比奥固结理论分析模型槽试验中土体在真空荷载下的孔压、孔隙比变化规律。其计算结果与实测值对比表明,该模型能很好地分析吹填土在真空荷载下的固结规律。计算结果显示:贴近排水板的土体在很短时间内被压密,造成

  17. Nonlinear consolidation of subsoil by vacuum preloading based on bi-logarithmic coordinate compression model%基于双对数压缩模型的真空预压非线性固结解

    Institute of Scientific and Technical Information of China (English)

    韩文君; 刘松玉; 章定文; 刘维正

    2013-01-01

    考虑真空荷载实际边界条件,引入对土体压缩曲线线性化的双对数坐标,建立了真空预压砂井地基非线性固结近似解答;利用模型试验结果验证了解答的可靠性,并分析了真空度衰减和土性参数对固结性状的影响。研究结果表明,考虑了真空荷载衰减及双对数坐标的解答计算得到的土体沉降、超静孔压与实测值最为接近。对于超固结土而言,基于变形计算的固结度随着压缩指数与渗透指数比值的增大而减小,随着真空荷载衰减系数的减小而减小;当压缩指数与渗透指数比值大于1时,正常固结状态中基于孔压计算的固结度随真空荷载衰减系数的减小而增大。随着压缩指数与回弹指数比值的增大,地基超静孔压消散速率也随之增加,沉降速率在超固结状态时随之减缓,在正常固结状态时则随之加快,土体由超固结状态进入正常固结状态的时间随之变长。%Based on the bi-logarithmic coordinate compression model and actual vacuum pressure along the drain for normally consolidated and over-consolidated clays, a new analytical solution of the radial consolidation of subsoil by vacuum preloading was derived.The analytical solution was verified by the model test, and the influences of vacuum pressure attenuation and soil parameters on consolidation were analyzed.The results show that the calculated settlement and the excess pore wa-ter pressure are most close to the measured data in model tests.For over-consolidated clays, the con-solidation degree calculated by deformation decreases with the increase of the ratio of the compres-sion index and the permeability index and with the decease of the vacuum pressure attenuation coeffi-cient.When the ratio of the compression index and the permeability index is more than one, the con-solidation degree in normal consolidation state calculated by pore water pressure increases with the decrease of

  18. Methods for producing complex films, and films produced thereby

    Energy Technology Data Exchange (ETDEWEB)

    Duty, Chad E.; Bennett, Charlee J. C.; Moon, Ji -Won; Phelps, Tommy J.; Blue, Craig A.; Dai, Quanqin; Hu, Michael Z.; Ivanov, Ilia N.; Jellison, Jr., Gerald E.; Love, Lonnie J.; Ott, Ronald D.; Parish, Chad M.; Walker, Steven

    2015-11-24

    A method for producing a film, the method comprising melting a layer of precursor particles on a substrate until at least a portion of the melted particles are planarized and merged to produce the film. The invention is also directed to a method for producing a photovoltaic film, the method comprising depositing particles having a photovoltaic or other property onto a substrate, and affixing the particles to the substrate, wherein the particles may or may not be subsequently melted. Also described herein are films produced by these methods, methods for producing a patterned film on a substrate, and methods for producing a multilayer structure.

  19. Producing Runaway Stars

    Science.gov (United States)

    Kohler, Susanna

    2016-07-01

    How are the hypervelocity stars weve observed in our galaxy produced? A recent study suggests that these escapees could be accelerated by a massive black hole in the center of the Large Magellanic Cloud.A Black Hole SlingshotSince their discovery in 2005, weve observed dozens of candidate hypervelocity stars stars whose velocity in the rest frame of our galaxy exceeds the local escape velocity of the Milky Way. These stars present a huge puzzle: how did they attain these enormous velocities?One potential explanation is known as the Hills mechanism. In this process, a stellar binary is disrupted by a close encounter with a massive black hole (like those thought to reside at the center of every galaxy). One member of the binary is flung out of the system as a result of the close encounter, potentially reaching very large velocities.A star-forming region known as LHA 120-N 11, located within the LMC. Some binary star systems within the LMC might experience close encounters with a possible massive black hole at the LMCs center. [ESA/NASA/Hubble]Blame the LMC?Usually, discussions of the Hills mechanism assume that Sagittarius A*, the supermassive black hole at the center of the Milky Way, is the object guilty of accelerating the hypervelocity stars weve observed. But what if the culprit isnt Sgr A*, but a massive black hole at the center of the Large Magellanic Cloud (LMC), one of the Milky Ways satellite galaxies?Though we dont yet have evidence of a massive black hole at the center of the LMC, the dwarf galaxy is large enough to potentially host one as large as 100,000 solar masses. Assuming that it does, two scientists at the University of Cambridge, Douglas Boubert and Wyn Evans, have now modeled how this black hole might tear apart binary star systems and fling hypervelocity stars around the Milky Way.Models for AccelerationBoubert and Evans determined that the LMCs hypothetical black hole could easily eject stars at ~100 km/s, which is the escape velocity of the

  20. Quality of milk produced by small and large dairy producers

    Directory of Open Access Journals (Sweden)

    Jose Carlos Ribeiro Junior

    2015-04-01

    Full Text Available The aim of this study was to compare the microbiological and physicochemical quality of raw milk produced by small and large dairy producers in Paraná, Brazil. Samples of raw milk were collected from small (49 and large (21 dairy producers. Dairy farms were characterized by observation and application of questionnaires. The total bacterial count (TBC was obtained by flow cytometry and Petrifilm® AC, while the somatic cell count (SCC was obtained by only flow cytometry. The content of fat, proteins, lactose, and solids in the mil were determined by infrared. Differences were observed in the techniques employed by small and large dairy producers, which may have influenced the microbiological quality of raw milk. Milk contamination significantly greater in milk produced by small farmers, which is evident from the average TBC of 3.8 × 106 CFU/mL obtained from milk produced by small farmers as compared to the TBC of 1.5 × 104 CFU/mL obtained from larger dairy farms. Twenty-four (49% small diary producers are no-compliant with the current standards for microbiological quality of refrigerated raw milk established by the law, while all larger producers were compliant with the standards. The average SCC of milk obtained from small producers was 2.2 × 105 SC/mL, while that of large milk producers was 3.9 × 105 SC/mL. Milk produced by small producers contained significantly higher fat, protein, lactose, and solids content. Milk produced by larger dairy farmers was mainly composed of lactose. In brief, the microbiological quality of milk from larger producers was higher, and SCC is proportional to the productivity. In addition, milk obtained from small dairy producers has a higher solid content.

  1. High doses of dextromethorphan, an NMDA antagonist, produce effects similar to classic hallucinogens

    Science.gov (United States)

    Carter, Lawrence P.; Johnson, Matthew W.; Mintzer, Miriam Z.; Klinedinst, Margaret A.; Griffiths, Roland R.

    2013-01-01

    Rationale Although reports of dextromethorphan (DXM) abuse have increased recently, few studies have examined the effects of high doses of DXM. Objective This study in humans evaluated the effects of supratherapeutic doses of DXM and triazolam. Methods Single, acute, oral doses of DXM (100, 200, 300, 400, 500, 600, 700, 800 mg/70 kg), triazolam (0.25, 0.5 mg/70kg), and placebo were administered to twelve healthy volunteers with histories of hallucinogen use, under double-blind conditions, using an ascending dose run-up design. Subjective, behavioral, and physiological effects were assessed repeatedly after drug administration for 6 hours. Results Triazolam produced dose-related increases in subject-rated sedation, observer-rated sedation, and behavioral impairment. DXM produced a profile of dose-related physiological and subjective effects differing from triazolam. DXM effects included increases in blood pressure, heart rate, and emesis, increases in observer-rated effects typical of classic hallucinogens (e.g. distance from reality, visual effects with eyes open and closed, joy, anxiety), and participant ratings of stimulation (e.g. jittery, nervous), somatic effects (e.g. tingling, headache), perceptual changes, end-of-session drug liking, and mystical-type experience. After 400 mg/70kg DXM, 11 of 12 participants indicated on a pharmacological class questionnaire that they thought they had received a classic hallucinogen (e.g. psilocybin). Drug effects resolved without significant adverse effects by the end of the session. In a 1-month follow up volunteers attributed increased spirituality and positive changes in attitudes, moods, and behavior to the session experiences. Conclusions High doses of DXM produced effects distinct from triazolam and had characteristics that were similar to the classic hallucinogen psilocybin. PMID:22526529

  2. 考虑真空度衰减及涂抹区渗透系数变化的真空预压固结解析解%Analytical solutions for vacuum preloading consolidation considering vacuum degree attenuation and change of permeability coefficient in smear zones

    Institute of Scientific and Technical Information of China (English)

    吴跃东; 吴鸿昇; 罗如平; 曾垂昌

    2016-01-01

    为更好地将理论计算应用于实际真空预压工程并指导工程实践,假设真空度线性衰减,建立真空预压软基径向固结方程,得出超孔隙水压力的计算公式及固结度。研究了涂抹区渗透系数对固结的影响,分别给出了渗透系数不变和渗透系数线性变化时地基中平均孔压和固结度的解析解,并进行了分析。分析结果表明,真空度衰减系数 k 1与 k2、井阻比 n 及涂抹区半径与排水体半径的比值 s 越小、非扰动区与涂抹区渗透系数比α越趋近 s ,则真空预压效果越好。将考虑真空度线性衰减的固结度解析解和 Hansbo 解与嘉兴港真空预压地基处理的实测数据进行对比,发现前者与实测数据更加吻合,且考虑涂抹区渗透系数线性变化的解更符合工程实际。%For the purpose of application of theoretical calculation to practical vacuum preloading projects and providing guidance in practical application, an equation for soft ground consolidation in the radial direction under vacuum preloading was established by assuming that the vacuum degree attenuated linearly, and formulas for the excess pore pressure and degree of consolidation were developed. Based on study of the effects of the permeability coefficient in smear zones, analytical solutions for the average pore pressure and degree of consolidation were deduced and verified with a constant permeability coefficient and linearly changing permeability coefficient, respectively. Results of analysis show that the smaller the vacuum degree attenuation coefficients, k1 and k2, the well resistance factor, n, and the radius ratio of the smear zone to drainage system, s, and the closer the ratio of the permeability coefficients of the undisturbed zone to the smear zone, α, to s, the better the effect of vacuum preloading. The analytical solutions considering the linear attenuation of the vacuum degree and Hansbo's solutions were compared

  3. English Organic Producer Survey 2013

    OpenAIRE

    Catherine L. Gerrard; Padel, Susanne; Lampkin, Nic

    2014-01-01

    This report summarises the results of a survey carried out with English organic producers in November and December 2013 as part of the Organic Data Network Project. There are approximately 2724 English organic producers and 223 of these participated in the survey, a response rate of just over 8%. The sample is not representative of the total population of English organic producers, see the data collection and analysis section for more details, but gives a snapshot of the situation for...

  4. DOES ELECTRIC CAR PRODUCE EMISSIONS?

    Directory of Open Access Journals (Sweden)

    Vladimír RIEVAJ

    2017-03-01

    Full Text Available This article focuses on the comparison of the amount of emissions produced by vehicles with a combustion engine and electric cars. The comparison, which is based on the LCA factor results, indicates that an electric car produces more emissions than a vehicle with combustion engine. The implementation of electric cars will lead to an increase in the production of greenhouse gases.

  5. Effects of erythropoietin in skin wound healing are dose related.

    Science.gov (United States)

    Sorg, Heiko; Krueger, Christian; Schulz, Torsten; Menger, Michael D; Schmitz, Frank; Vollmar, Brigitte

    2009-09-01

    The hematopoietic growth factor erythropoietin (EPO) attracts attention due to its all-tissue-protective pleiotropic properties. We studied the effect of EPO on dermal regeneration using intravital microscopy in a model of full dermal thickness wounds in the skin-fold chamber of hairless mice. Animals received repetitive low doses or high doses of EPO (RLD-EPO or RHD-EPO) or a single high dose of EPO (SHD-EPO). SHD-EPO accelerated wound epithelialization, reduced wound cellularity, and induced maturation of newly formed microvascular networks. In contrast, RHD-EPO impaired the healing process, as indicated by delayed epithelialization, high wound cellularity, and lack of maturation of microvascular networks. Also, RHD-EPO caused an excessive erythrocyte mass and rheological malfunction, further deteriorating vessel and tissue maturation. Moreover, RHD-EPO altered fibroblast and keratinocyte migration in vitro, while both cell types exposed to RLD-EPO, and, in particular, to SHD-EPO showed accelerated wound scratch closure. In summary, our data show that a single application of a high dose of EPO accelerates and improves skin wound healing.

  6. Dose-related selection of fluoroquinolone-resistant Escherichia coli.

    Science.gov (United States)

    Olofsson, Sara K; Marcusson, Linda L; Strömbäck, Ann; Hughes, Diarmaid; Cars, Otto

    2007-10-01

    To investigate the effects of clinically used doses of norfloxacin, ciprofloxacin and moxifloxacin on survival and selection in Escherichia coli populations containing fluoroquinolone-resistant subpopulations and to measure the value of the pharmacodynamic index AUC/mutant prevention concentration (MPC) that prevents the growth of pre-existing resistant mutants. Mixed cultures of susceptible wild-type and isogenic single (gyrA S83L) or double (gyrA S83L, Delta marR) fluoroquinolone-resistant mutants were exposed to fluoroquinolones for 24 h in an in vitro kinetic model. Antibiotic concentrations modelled pharmacokinetics attained with clinical doses. All tested doses eradicated the susceptible wild-type strain. Norfloxacin 200 mg administered twice daily selected for both single and double mutants. Ciprofloxacin 250 mg administered twice daily eradicated the single mutant, but not the double mutant. For that, 750 mg administered twice daily was required. Moxifloxacin 400 mg once daily eliminated the single mutant, but did not completely remove the double mutant. The MPC of ciprofloxacin was determined and based on those dose simulations that eradicated mutant subpopulations, an AUC/MPC(wild-type) of 35 prevented selection of the single mutant, whereas an AUC/MPC(single mutant) of 14 (equivalent to an AUC/MPC(wild-type) of 105) prevented selection of the double mutant. All tested clinical dosing regimens were effective in eradicating susceptible bacteria, but ciprofloxacin 750 mg twice daily was the only dose that prevented the selection of single- and double-resistant E. coli mutants. Thus, among approved fluoroquinolone dosing regimens, some are significantly more effective than others in exceeding the mutant selection window and preventing the enrichment of resistant mutants.

  7. Neon-20 depth-dose relations in water

    Science.gov (United States)

    Wilson, J. W.; Townsend, L. W.; Bidasaria, H. B.; Schimmerling, W.; Wong, M.; Howard, J.

    1984-01-01

    The dose from heavy ion beams has been calculated using a one-dimensional transport theory and evaluated for 670 MeV/amu 20 Ne beams in water. The result is presented so as to be applicable to arbitrary ions for which the necessary interaction data are known. The present evaluation is based on thar Silberg-Tsao fragmentation parameters augmented with light fragment production from intranuclear cascades, recently calculated nuclear absorption cross sections, and evaluated stopping power data. Comparison with recent experimental data obtained at the Lawrence Berkeley Laboratory reveals the need for more accurate fragmentation data.

  8. [Doses-related effects of lynestrenol on ovulation (author's transl)].

    Science.gov (United States)

    Pizarro, M A; Thomas, K; Ferin, J

    1976-01-01

    8 women, aged 22-28, with normal, ovulatory menstrual cycles, volunteered to take different doses of Lynestrenol to determine its effects on Luteineizing Hormone (LH) secretion, and on plasma progesterone levels. Blood samples were taken in the morning and plasma was immediately separated. Results showed that body temperature varied unpredictably during the cycle, and therefore could not be considered a reliable parameter of ovulation. 0.35 mg of Lynestrenol administered daily was enough to suppress ovulation, as evidenced by the absence of LH during midcycle. Although differences exists in individual reactions, administration of Lynestrenol beyond 0.6 mg. daily always suppresses ovulation because of hypothalamo-pituitary inhibition, while doses below 0.5mg. daily can bring about episodic peaks. It is still not clear how Lynestrenol influences gonadotropins, especially LH, while intermittent bleeding seems to be the only sure side effect.

  9. User producer interaction in context

    NARCIS (Netherlands)

    Nahuis, R.; Moors, E.H.M.; Smits, R.E.H.M.

    2012-01-01

    User producer interaction (UPI) increases chances for successful innovations. It is not always clear, however, what type of interaction is necessary in a particular context. This article identifies seven different types of UPI: constructing linkages, broadening, characterizing users, upstream

  10. Methods of producing transportation fuel

    Science.gov (United States)

    Nair, Vijay; Roes, Augustinus Wilhelmus Maria; Cherrillo, Ralph Anthony; Bauldreay, Joanna M.

    2011-12-27

    Systems, methods, and heaters for treating a subsurface formation are described herein. At least one method for producing transportation fuel is described herein. The method for producing transportation fuel may include providing formation fluid having a boiling range distribution between -5.degree. C. and 350.degree. C. from a subsurface in situ heat treatment process to a subsurface treatment facility. A liquid stream may be separated from the formation fluid. The separated liquid stream may be hydrotreated and then distilled to produce a distilled stream having a boiling range distribution between 150.degree. C. and 350.degree. C. The distilled liquid stream may be combined with one or more additives to produce transportation fuel.

  11. 容量状态对革兰氏阴性杆菌感染性休克患者血液动力学类型及氧代谢的影响%Effect of preload on hemodynamic and oxygen metabolism in septic shock patients

    Institute of Scientific and Technical Information of China (English)

    杨毅; 邱海波; 周韶霞; 陈德昌

    2001-01-01

    目的 探讨容量状态对感染性休克患者血液动力学状态及氧化谢的影响。方法 监测10例感染性休克患者不同容量状态下血液动力学及氧化谢的变化。结果 低血容量时,肺动脉嵌压(PAWP)0.8±0.3kPa,心脏指数(CI)2.0±0.4L.min-1.m-2,体循环阻力指数(SVRI)为3291.9±810.6dyn.s.cm-5.m2,血液动力学呈低排高阻型。通过液体复苏,使患者前负荷接近正常,PAWP达到1.6±0.4kPa时,CI显著升高,达3.9±0.9L.min-1.m-2(P<0.05),SVRI显著降低至1362.2±382.9dyn.s.cm-5.m2(P<0.05),血液动力学状态转化为高排低阻型。与之相对应,在液体复苏前后,氧输送指数(DO2)由284.3±77.0显著升至558.5±131.1ml.min-1.m-2(P<0.05),氧耗指数(VO2)由99.7±52.3上升为140.7±45.0ml.min-1.m-2。结论 容量状态是影响感染性休克患者血液动力学类型的重要因素,液体复苏在感染性休克治疗中有重要意义。%Objective To observe the effect of preload on hemodynamic andoxygen metabolism in patients with septic shock.Methods 10 patients with septic shock induced by gram negative bacteria were admitted to this study group,parameters of hemodynamic and oxygen metabolism in defferent preload were measured.Results By fluid resuscitation,as the pulmonary artery wedge pressure increased from 0.8±0.3 to 1.6±0.4 kPa,cardiac index rose from 2.0±0.4 to 3.9±0.9 L.min-1.m-2,but systemic vascular resistance index decreased from 3 291.9±810.6 to 1 362.2±382.9 dyn.s.cm-5.m2 significantly (P<0.05).Meanwhile,oxygen delivery index rose from 284.3±77.0 to 558.5±131.1 ml.min-1.m-2,and oxygen consumption index also increased from 99.7±52.3 to 140.7±45.0 ml.min-1.m-2 remarkably(P<0.05).Conclusion Hemodynamic classification was decided by cardiac preload,fluid resuscitation is very important in septic shock therapy.

  12. Price satisfaction and producer loyalty

    DEFF Research Database (Denmark)

    Mutonyi, Sarah; Beukel, Karin; Gyau, Amos

    2016-01-01

    Purpose The purpose of this paper is to investigate which dimensions of price satisfaction influence producers’ trust in buyers and assess the mediating role of such trust in the relationship between price satisfaction and producer loyalty in fresh fruit supply chains. Design/methodology/approach......Purpose The purpose of this paper is to investigate which dimensions of price satisfaction influence producers’ trust in buyers and assess the mediating role of such trust in the relationship between price satisfaction and producer loyalty in fresh fruit supply chains. Design...... reliability, and relative price are dimensions of price satisfaction that affect producers’ trust in the buyer. Moreover, trust between the producer and the buyer is found to be a strong mediator between price satisfaction and producer loyalty. The findings support recent studies about trust and its mediating...... between the multi-dimensional nature of price satisfaction and producer loyalty with trust as a mediating variable in the business-to-business (B2B) context. Although B2B relationships have been shown to be of great importance for smallholders in enhancing business performance with their buyers, little...

  13. Producing liquid fuels from biomass

    Science.gov (United States)

    Solantausta, Yrjo; Gust, Steven

    The aim of this survey was to compare, on techno-economic criteria, alternatives of producing liquid fuels from indigenous raw materials in Finland. Another aim was to compare methods under development and prepare a proposal for steering research related to this field. Process concepts were prepared for a number of alternatives, as well as analogous balances and production and investment cost assessments for these balances. Carbon dioxide emissions of the alternatives and the price of CO2 reduction were also studied. All the alternatives for producing liquid fuels from indigenous raw materials are utmost unprofitable. There are great differences between the alternatives. While the production cost of ethanol is 6 to 9 times higher than the market value of the product, the equivalent ratio for substitute fuel oil produced from peat by pyrolysis is 3 to 4. However, it should be borne in mind that the technical uncertainties related to the alternatives are of different magnitude. Production of ethanol from barley is of commercial technology, while biomass pyrolysis is still under development. If the aim is to reach smaller carbon dioxide emissions by using liquid biofuels, the most favorable alternative is pyrolysis oil produced from wood. Fuels produced from cultivated biomass are more expensive ways of reducing CO2 emissions. Their potential of reducing CO2 emissions in Finland is insignificant. Integration of liquid fuel production to some other production line is more profitable.

  14. Shiga Toxin Producing Escherichia coli.

    Science.gov (United States)

    Bryan, Allen; Youngster, Ilan; McAdam, Alexander J

    2015-06-01

    Shiga toxin-producing Escherichia coli (STEC) is among the common causes of foodborne gastroenteritis. STEC is defined by the production of specific toxins, but within this pathotype there is a diverse group of organisms. This diversity has important consequences for understanding the pathogenesis of the organism, as well as for selecting the optimum strategy for diagnostic testing in the clinical laboratory. This review includes discussions of the mechanisms of pathogenesis, the range of manifestations of infection, and the several different methods of laboratory detection of Shiga toxin-producing E coli.

  15. Producing miniature threads. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Gillespie, L.K.; Robb, J.M.

    1981-11-01

    Miniature precision actuators, timers, and switches typically utilize miniature threads to provide convenient assembly, disassembly and adjustment. Thread rolling provides high-quality external threads with greater strength and lower cost than other thread-producing techniques. Tap breakage is a significant problem when 0.5 and 0.6 Unified National Miniature (UNM) threads must be produced in hard materials such as SAE K95100 high-permeability magnetic steel. Aluminum parts can be tapped with no difficulty in these sizes. Stainless steel 0.5 UNM screws break at loads of 21 lb (53 N). Thread failure occurs at thread heights of 62% full thread or lower.

  16. The Top Theological Degree Producers

    Science.gov (United States)

    Diverse: Issues in Higher Education, 2012

    2012-01-01

    Each year, "Diverse: Issues in Higher Education" publishes a list of the Top 100 producers of associate, bachelor's and graduate degrees awarded to minority students based on research conducted by Dr. Victor M. H. Borden, professor of educational leadership and policy studies at Indiana University Bloomington. This year, for the first…

  17. A new producer of mevastatin

    Institute of Scientific and Technical Information of China (English)

    Chu; Yiwen; Yang; Xi

    1999-01-01

    Mevastatin (compactin)was isolated form culture broth of a fungal strain SIIA-F3933,The strain SIIA-F3933 was isolated from a soil sample collected in Putuo mountain,Zhejiang Province,P,R.China,It was identified as Penicillium janczewskii Zaleski based on its cultural and morphological characteristics and was regarded as a new producer of mevastatin,。

  18. Method for producing hydrophobic aerogels

    Science.gov (United States)

    Hrubesh, Lawrence W.; Poco, John F.; Coronado, Paul R.

    1999-01-01

    A method for treating a dried monolithic aerogel containing non-dispersed particles, with an organometallic surface modifying agent to produce hydrophobic aerogels. The dried, porous hydrophobic aerogels contain a protective layer of alkyl groups, such as methyl groups, on the modified surfaces of the pores of the aerogel. The alkyl groups at the aerogel surface typically contain at least one carbon-metal bond per group.

  19. Wall force produced during disruptions

    Science.gov (United States)

    Strauss, H.; Paccagnella, R.; Breslau, J.

    2009-11-01

    The study of disruptions is of great importance for ITER. Previous work on disruptions [1] is extended to compute toroidally asymmetric wall force in ITER, using the M3D code. The disruptions are produced by n = 1 resistive wall modes or external kink modes. A thin wall resistive boundary model is used to calculate the wall forces. The symmetric wall force, produced by a VDE, and the asymmetric wall force, produced by n = 1 modes, are comparable in magnitude. It is found that the asymmetric and axisymmetric forces scale with the growth rate of the instability multiplied by the square of the current divided by magnetic field. A similar scaling was reported for VDEs in JET [2]. Numerically, the study of disruptions is very challenging. In the M3D extended MHD code, dealiasing was applied in the toroidal direction. Advection terms were treated with a numerical upwind method. These techniques provided sufficient numerical stability to simulate entire disruption events. [4pt] [1] R. Paccagnella, H. R. Strauss, and J. Breslau, Nucl. Fusion (2009) 49 035003. [2] V. Riccardo, T. C. Hender, P. J. Lomas, et al., Plasma Phys. Control. Fusion (2004)

  20. Endocrine cells producing regulatory peptides.

    Science.gov (United States)

    Solcia, E; Usellini, L; Buffa, R; Rindi, G; Villani, L; Zampatti, C; Silini, E

    1987-07-15

    Recent data on the immunolocalization of regulatory peptides and related propeptide sequences in endocrine cells and tumors of the gastrointestinal tract, pancreas, lung, thyroid, pituitary (ACTH and opioids), adrenals and paraganglia have been revised and discussed. Gastrin, xenopsin, cholecystokinin (CCK), somatostatin, motilin, secretin, GIP (gastric inhibitory polypeptide), neurotensin, glicentin/glucagon-37 and PYY (peptide tyrosine tyrosine) are the main products of gastrointestinal endocrine cells; glucagon, CRF (corticotropin releasing factor), somatostatin, PP (pancreatic polypeptide) and GRF (growth hormone releasing factor), in addition to insulin, are produced in pancreatic islet cells; bombesin-related peptides are the main markers of pulmonary endocrine cells; calcitonin and CGRP (calcitonin gene-related peptide) occur in thyroid and extrathyroid C cells; ACTH and endorphins in anterior and intermediate lobe pituitary cells, alpha-MSH and CLIP (corticotropin-like intermediate lobe peptide) in intermediate lobe cells; met- and leu-enkephalins and related peptides in adrenal medullary and paraganglionic cells as well as in some gut (enterochromaffin) cells; NPY (neuropeptide Y) in adrenaline-type adrenal medullary cells, etc.. Both tissue-appropriate and tissue-inappropriate regulatory peptides are produced by endocrine tumours, with inappropriate peptides mostly produced by malignant tumours.

  1. Intranasal application of the alpha2-adrenoceptor agonist BHT-920 produces decongestion in the cat.

    Science.gov (United States)

    Mcleod, R L; Erickson, C H; Mingo, G G; Hey, J A

    2001-01-01

    The effect of alpha2-selective adrenoreceptor activation on nasal cavity dimension in an experimental model of congestion has not been defined. Presently, we used acoustic rhinometry to evaluate the decongestant activity of BHT-920, a selective alpha2-adrenergic agonist against nasal congestion produced by intranasal compound 48/80. Administration of the mast cell liberator compound 48/80 (1%) into a nasal passageway decreased ipsilateral volume and minimum cross-sectional area by 73 +/- 4% and 42 +/- 6%, respectively. The congestant effect of compound 48/80 was blocked by topical BHT-920 (0.3 and 1%) in a dose related manner. In addition, the decrease in minimum cross-sectional area produced by compound 48/80 was attenuated after topical BHT-920 treatment. As a comparison we also evaluated the topical decongestant activity effects of the alpha1-adrenergic agonist phenylephrine, and the nonselective alpha-agonist oxymetazoline. Both phenylephrine (0.1-1.0%) and oxymetazoline (0.01-0.3%) produced decongestion. The blood pressure effects of these three drugs also were evaluated. At doses of 0.3 and 1.0%, BHT-920 did not produce hypertension. In contrast, oxymetaZoline (0.01-0.1%) produced a transient hypertension that peaked at 15 minutes and fully recovered 45 minutes after administration. The hypertensive effect of phenylephrine at 0.3 and 1.0% lasted over 60 minutes. The present findings indicate that selective alpha2-agonists may produce decongestant activity with an improved cardiovascular profile compared with current sympathomimetic drugs such as phenylephrine.

  2. Electromagnetic pulses produced by expanding laser-produced Au plasma

    Directory of Open Access Journals (Sweden)

    De Marco Massimo

    2015-06-01

    Full Text Available The interaction of an intense laser pulse with a solid target produces large number of fast free electrons. This emission gives rise to two distinct sources of the electromagnetic pulse (EMP: the pulsed return current through the holder of the target and the outflow of electrons into the vacuum. A relation between the characteristics of laser-produced plasma, the target return current and the EMP emission are presented in the case of a massive Au target irradiated with the intensity of up to 3 × 1016 W/cm2. The emission of the EMP was recorded using a 12 cm diameter Moebius loop antennas, and the target return current was measured using a new type of inductive target probe (T-probe. The simultaneous use of the inductive target probe and the Moebius loop antenna represents a new useful way of diagnosing the laser–matter interaction, which was employed to distinguish between laser-generated ion sources driven by low and high contrast laser pulses.

  3. Method for producing a tube

    Science.gov (United States)

    Peterson, Kenneth A.; Rohde, Steven B.; Pfeifer, Kent B.; Turner, Timothy S.

    2007-01-02

    A method is described for producing tubular substrates having parallel spaced concentric rings of electrical conductors that can be used as the drift tube of an Ion Mobility Spectrometer (IMS). The invention comprises providing electrodes on the inside of a tube that are electrically connected to the outside of the tube through conductors that extend between adjacent plies of substrate that are combined to form the tube. Tubular substrates are formed from flexible polymeric printed wiring board materials, ceramic materials and material compositions of glass and ceramic, commonly known as Low Temperature Co-Fired Ceramic (LTCC). The adjacent plies are sealed together around the electrode.

  4. Producing biofuels using polyketide synthases

    Science.gov (United States)

    Katz, Leonard; Fortman, Jeffrey L; Keasling, Jay D

    2013-04-16

    The present invention provides for a non-naturally occurring polyketide synthase (PKS) capable of synthesizing a carboxylic acid or a lactone, and a composition such that a carboxylic acid or lactone is included. The carboxylic acid or lactone, or derivative thereof, is useful as a biofuel. The present invention also provides for a recombinant nucleic acid or vector that encodes such a PKS, and host cells which also have such a recombinant nucleic acid or vector. The present invention also provides for a method of producing such carboxylic acids or lactones using such a PKS.

  5. Serotonin (5-HT) precursor loading with 5-hydroxy-l-tryptophan (5-HTP) reduces locomotor activation produced by (+)-amphetamine in the rat.

    Science.gov (United States)

    Baumann, Michael H; Williams, Zakia; Zolkowska, Dorota; Rothman, Richard B

    2011-04-01

    Evidence suggests that increases in synaptic serotonin (5-HT) can reduce the stimulant properties of amphetamine-type drugs. Here we tested the hypothesis that administration of the 5-HT precursor 5-hydroxy-l-tryptophan (5-HTP), along with the peripheral decarboxylase inhibitor benserazide, would decrease locomotor effects of (+)-amphetamine. Drug treatments were administered to conscious male rats undergoing in vivo microdialysis in nucleus accumbens. During dialysis sampling, rats were housed in chambers equipped with photobeams to detect forward locomotion (i.e., ambulation) and repetitive movements (i.e., stereotypy). Extracellular concentrations of dopamine (DA) and 5-HT were measured by high-pressure liquid chromatography with electrochemical detection. 5-HTP (10 & 30 mg/kg, i.p.) plus benserazide (30 mg/kg, i.p.) caused dose-related increases in 5-HT but failed to alter other parameters. (+)-Amphetamine (0.3 & 1.0 mg/kg, i.p.) produced dose-related increases in DA, ambulation and stereotypy. Combined administration of 5-HTP and (+)-amphetamine evoked large elevations in extracellular DA and 5-HT, but caused significantly less ambulation than (+)-amphetamine alone (~50% reduction). Our results confirm that 5-HTP can decrease hyperactivity produced by (+)-amphetamine, even in the presence of elevations in dialysate DA. The data suggest that 5-HTP and (+)-amphetamine may be useful to broadly enhance monoamine function in the clinical setting, while reducing undesirable effects of (+)-amphetamine. Published by Elsevier Ireland Ltd.

  6. Serotonin (5-HT) Precursor Loading with 5-Hydroxy-L-tryptophan (5-HTP) Reduces Locomotor Activation Produced by (+)-Amphetamine in the Rat

    Science.gov (United States)

    Baumann, Michael H.; Williams, Zakia; Zolkowska, Dorota; Rothman, Richard B.

    2010-01-01

    Background Evidence suggests that increases in synaptic serotonin (5-HT) can reduce the stimulant properties of amphetamine-type drugs. Here we tested the hypothesis that administration of the 5-HT precursor 5-hydroxy-L-tryptophan (5-HTP), along with the peripheral decarboxylase inhibitor benserazide, would decrease locomotor effects of (+)-amphetamine. Methods Drug treatments were administered to conscious male rats undergoing in vivo microdialysis in nucleus accumbens. During dialysis sampling, rats were housed in chambers equipped with photobeams to detect forward locomotion (i.e., ambulation) and repetitive movements (i.e., stereotypy). Extracellular concentrations of dopamine (DA) and 5-HT were measured by high-pressure liquid chromatography with electrochemical detection. Results 5-HTP (10 & 30 mg/kg, i.p.) plus benserazide (30 mg/kg, i.p.) caused dose-related increases in 5-HT but failed to alter other parameters. (+)-Amphetamine (0.3 & 1.0 mg/kg, i.p.) produced dose-related increases in DA, ambulation and stereotypy. Combined administration of 5-HTP and (+)-amphetamine evoked large elevations in extracellular DA and 5-HT, but caused significantly less ambulation than (+)-amphetamine alone (~50% reduction). Conclusions Our results confirm that 5-HTP can decrease hyperactivity produced by (+)-amphetamine, even in the presence of elevations in dialysate DA. The data suggest that 5-HTP and (+)-amphetamine may be useful to broadly enhance monoamine function in the clinical setting, while reducing undesirable effects of (+)-amphetamine. PMID:21071157

  7. Producing The New Regressive Left

    DEFF Research Database (Denmark)

    Crone, Christine

    to be a committed artist, and how that translates into supporting al-Assad’s rule in Syria; the Ramadan programme Harrir Aqlak’s attempt to relaunch an intellectual renaissance and to promote religious pluralism; and finally, al-Mayadeen’s cooperation with the pan-Latin American TV station TeleSur and its ambitions...... becomes clear from the analytical chapters is the emergence of the new cross-ideological alliance of The New Regressive Left. This emerging coalition between Shia Muslims, religious minorities, parts of the Arab Left, secular cultural producers, and the remnants of the political,strategic resistance...... coalition (Iran, Hizbollah, Syria), capitalises on a series of factors that bring them together in spite of their otherwise diverse worldviews and agendas. The New Regressive Left is united by resistance against the growing influence of Saudi Arabia in the religious, cultural, political, economic...

  8. Soybean biomass produced in Argentina

    DEFF Research Database (Denmark)

    Semino, Stella; Paul, Helena; Tomei, Julia

    Soybean biomass for biodiesel, produced in Argentina amongst other places, is considered by some to reduce greenhouse gas emissions and mitigate climate change when compared with fossil fuel. To ensure that the production of biofuels is ‘sustainable', EU institutions and national governments...... are currently designing certification schemes for the sustainable production of biomass. This paper questions the validity of proposed environmental standards, using the production of Argentine soybean as a case study. The production of soybean production is associated with profound environmental impacts...... generates emissions of N2O. The large quantity of substances, sprayed by terrestrial and aerial means, has negative impacts on biodiversity, water, soil, and human and animal health. The intensive production of soybeans also leads to social impacts, including loss of livelihoods and food sovereignty...

  9. ANTIPROTONS PRODUCED IN SUPERNOVA REMNANTS

    Energy Technology Data Exchange (ETDEWEB)

    Berezhko, E. G.; Ksenofontov, L. T., E-mail: ksenofon@ikfia.sbras.ru [Yu. G. Shafer Institute of Cosmophysical Research and Aeronomy, 31 Lenin Avenue, 677891 Yakutsk (Russian Federation)

    2014-08-20

    We present the energy spectrum of an antiproton cosmic ray (CR) component calculated on the basis of the nonlinear kinetic model of CR production in supernova remnants (SNRs). The model includes the reacceleration of antiprotons already existing in the interstellar medium as well as the creation of antiprotons in nuclear collisions of accelerated protons with gas nuclei and their subsequent acceleration by SNR shocks. It is shown that the production of antiprotons in SNRs produces a considerable effect in their resultant energy spectrum, making it essentially flatter above 10 GeV so that the spectrum at TeV energies increases by a factor of 5. The calculated antiproton spectrum is consistent with the PAMELA data, which correspond to energies below 100 GeV. As a consistency check, we have also calculated within the same model the energy spectra of secondary nuclei and show that the measured boron-to-carbon ratio is consistent with the significant SNR contribution.

  10. Leaf-produced floral signals.

    Science.gov (United States)

    Zeevaart, Jan A D

    2008-10-01

    Florigen is the hypothetical leaf-produced signal that induces floral initiation at the shoot apex. The nature of florigen has remained elusive for more than 70 years. But recent progress toward understanding the regulatory network for flowering in Arabidopsis has led to the suggestion that FLOWERING LOCUS T (FT) or its product is the mobile flower-inducing signal that moves from an induced leaf through the phloem to the shoot apex. In the past year, physical and chemical evidence has shown that it is FT protein, and not FT mRNA, that moves from induced leaves to the apical meristem. These results have established that FT is the main, if not the only, component of the universal florigen.

  11. Selection of phytotoxin producing rhizobacteria

    Directory of Open Access Journals (Sweden)

    Daniel D.C. Carvalho

    2011-09-01

    Full Text Available In order to select phytotoxin producing rhizobacteria to control weed plants, twenty five bacterial strains previously isolated from the rhizospheres of various plants were grown in a liquid medium and, after cell removal by centrifugation, the liquid phases were freeze-dried and the products were extracted with ethyl acetate/methanol. The extracts were concentrated to dryness under vacuum and dissolved in water and sucrose solution to be submitted to in vitro assays of lettuce (Lactuca sativa L. seed germination and wheat (Triticum aestivum L. coleoptile growth. Although most samples affected coleoptile growth, only those from four strains reduced lettuce seed germination. Two strains of Bacillus cereus, one strain of B. pumilus and one of Stenotrophoonas altophilia were the most promising microorganisms for producing phytotoxin and, consequently, for the development of new weed control products.Com o objetivo de selecionar rizobactérias produtoras de fitotoxinas para uso no controle de plantas daninhas, vinte e cinco isolados bacterianos previamente obtidos das rizosferas de diferentes plantas foram cultivados em meio líquido e, após remoção das células por centrifugação, as fases líquidas foram liofilizadas e os resíduos obtidos foram submetidos à extração com acetato de etila/metanol. Os extratos foram concentrados sob vácuo até secura e dissolvidos em água e solução de sacarose para serem submetidos a testes in vitro de germinação de sementes de alface (Lactuca sativa L. e de crescimento de coleóptilos de trigo (Triticum aestivum L.. Embora a maior parte das amostras tenha desfavorecido o crescimento dos coleóptilos de trigo, somente as provenientes de quatro isolados reduziram a germinação das sementes de alface. Dois isolados de Bacillus cereus, um isolado de B. pumilus e um de Stenotrophomonas maltophilia foram os microrganismos mais promissores para a produção de fitotoxinas, com possibilidade de uso no

  12. Yeast: A new oil producer?

    Directory of Open Access Journals (Sweden)

    Beopoulos Athanasios

    2012-01-01

    Full Text Available The increasing demand of plant oils or animal fat for biodiesel and specific lipid derivatives for the oleochemical field (such as lubricants, adhesives or plastics have created price imbalance in both the alimentary and energy field. Moreover, the lack of non-edible oil feedstock has given rise to concerns on land-use practices and on oil production strategies. Recently, much attention has been paid to the exploitation of microbial oils. Most of them present lipid profiles similar in type and composition to plants and could therefore have many advantages as are no competitive with food, have short process cycles and their cultivation is independent of climate factors. Among microorganisms, yeasts seem to be very promising as they can be easily genetically enhanced, are suitable for large-scale fermentation and are devoid of endotoxins. This review will focus on the recent understanding of yeasts lipid metabolism, the succeeding genetic engineering of the lipid pathways and the recent developments on fermentation techniques that pointed out yeasts as promising alternative producers for oil or plastic.

  13. Engineering microbes to produce biofuels.

    Science.gov (United States)

    Wackett, Lawrence P

    2011-06-01

    The current biofuels landscape is chaotic. It is controlled by the rules imposed by economic forces and driven by the necessity of finding new sources of energy, particularly motor fuels. The need is bringing forth great creativity in uncovering new candidate fuel molecules that can be made via metabolic engineering. These next generation fuels include long-chain alcohols, terpenoid hydrocarbons, and diesel-length alkanes. Renewable fuels contain carbon derived from carbon dioxide. The carbon dioxide is derived directly by a photosynthetic fuel-producing organism(s) or via intermediary biomass polymers that were previously derived from carbon dioxide. To use the latter economically, biomass depolymerization processes must improve and this is a very active area of research. There are competitive approaches with some groups using enzyme based methods and others using chemical catalysts. With the former, feedstock and end-product toxicity loom as major problems. Advances chiefly rest on the ability to manipulate biological systems. Computational and modular construction approaches are key. For example, novel metabolic networks have been constructed to make long-chain alcohols and hydrocarbons that have superior fuel properties over ethanol. A particularly exciting approach is to implement a direct utilization of solar energy to make a usable fuel. A number of approaches use the components of current biological systems, but re-engineer them for more direct, efficient production of fuels.

  14. Method for producing diene hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Tsaylingol' d, A.L.; Abayev, G.N.; Mikhaylov, R.K.; Stepanov, G.A.; Troitskiy, A.P.

    1980-04-28

    A method is claimed for producing diene hydrocarbons by oxidational dehydration of paraffin or olefin hydrocarbons in a fluidized bed of a concentrate with circulation of the latter between the zones of the reaction of regeneration with the help of circulation stand pipes. To increase the efectiveness of the process, it is proposed to circulate the concentrate between the zones of reaction and regeneration, sequentially disposed in a common apparatus with a difference in the concentration of the concentrate in the circulation stand pipes disposed in the same apparatus and the zone of the reaction equal to 20-700 kg/m/sup 3/. For example, the process of oxidational dehydration of butane through the proposed system is conducted in an apparatus with a diameter of 1,000 mm, a circulation stand pipe diameter of 500 mm, a linear gas speed in the reaction zone of 0.6 m/s, and in the circulation stand pipe of 0.15 m/s. The concentration of the concentrate in the dehydration zone is 640 kg/m/sup 3/ and in the stand pipe, 970 kg/m/sup 3/. The volumetric ratio of the n-C/sub 4/H/sub 10/:air, air:vapor vapor in the form of a condensate is 1:7.2:4.5:5.5. The output of the butadiene is: in the passed butane, 32.9% and in the broken down butane, 52.5%. The butane conversion is 62.6%. The losses of the concentrate with the contact gas and with the regeneration gases is 1/3 as much for the supplied butane, than in a known method. The method makes it possible to reduce the air expenditure by 60%, to reduce the concentrate losses by 2-3 times and to simplify the industrial system.

  15. Framework for Producing Ecological Nowcasts

    Science.gov (United States)

    Votava, P.; Nemani, R. R.; Michaelis, A.; Milesi, C.; Hashimoto, H.; Ichii, K.; Melton, F.

    2007-12-01

    TOPS is a data and modeling software system designed to seamlessly integrate data from satellite, aircraft and ground sensors, and weather/climate models with application models to quickly and reliably produce operational nowcasts and forecasts of ecological conditions. Through automation of the data retrieval, pre-processing, integration, and modeling steps, TOPS is able to reliably provide data on current and predicted ecosystem conditions, allowing TOPS data products to be used in an operational setting for a range of applications. The core of the system is located and maintained by the Ecocast group at NASA Ames Research Center. We have develop a layered approach where at the lowest level the system interacts with the numerous data providers such as the Distributed Active Archive Centers (DAAC), the National Center for Environmental Predictions (NCEP), the National Weather Service (NWS), NOAA, and others. This subsystem is fully autonomous, gathering data through periodic query to the requesting centers sometimes as often as every 15-minutes. Subsets of our input datasets are also available by subscriptions and are being pushed to us as they become available (Oregon State University direct broadcast feed is an example of such interaction). When the data are obtained, they are archived in the database and then further processed to fit the application needs. Due to significant differences in climate and satellite data processing, we have two separate subsystems to accomplish the task. On the climate side, we merge ground station data with model data and grid these to required resolution together with generation of basic statistics and QA/QC information. The satellite processing subsystem performs spatial data tiling and subsetting, as well as composition of data sets based on the QA/QC information supplied, in order to obtain the highest quality inputs. After the climate and satellite data are processed, they are inserted into a database. The model framework

  16. Environmental risk assessment of alkylphenols from offshore produced water on fish reproduction.

    Science.gov (United States)

    Beyer, Jonny; Myhre, Lars Petter; Sundt, Rolf C; Meier, Sonnich; Tollefsen, Knut-Erik; Vabø, Rune; Klungsøyr, Jarle; Sanni, Steinar

    2012-04-01

    Concern has been raised over whether environmental release of alkylphenols (AP) in produced water (PW) discharges from the offshore oil industry could impose a risk to the reproduction of fish stocks in the North Sea. An environmental risk assessment (ERA) was performed to determine if environmental exposure to PW APs in North Sea fish populations is likely to be high enough to give effects on reproduction endpoints. The DREAM (Dose related Risk and Effect Assessment Model) software was used in the study and the inputs to the ERA model included PW discharge data, fate information of PW plumes, fish distribution information, as well as uptake and elimination information of PW APs. Toxicodynamic data from effect studies with Atlantic cod (Gadus morhua) exposed to APs were used to establish a conservative environmental risk threshold value for AP concentration in seawater. By using the DREAM software to 1) identify the areas of highest potential risk and 2) integrate fish movement and uptake/elimination rates of APs for the chosen areas we found that the environmental exposure of fish to APs from PW is most likely too low to affect reproduction in wild populations of fish in the North Sea. The implications related to risk management of offshore PW and uncertainties in the risk assessment performed are discussed.

  17. Echocardiographic Assessment of Preload Responsiveness in Critically Ill Patients

    Directory of Open Access Journals (Sweden)

    Alexander Levitov

    2012-01-01

    Full Text Available Fluid challenges are considered the cornerstone of resuscitation in critically ill patients. However, clinical studies have demonstrated that only about 50% of hemodynamically unstable patients are volume responsive. Furthermore, increasing evidence suggests that excess fluid resuscitation is associated with increased mortality. It therefore becomes vital to assess a patient's fluid responsiveness prior to embarking on fluid loading. Static pressure (CVP, PAOP and echocardiographic (IVC diameter, LVEDA parameters fails to predict volume responsiveness. However, a number of dynamic echocardiographic parameters which are based on changes in vena-caval dimensions or cardiac function induce by positive pressure ventilation or passive leg raising appear to be highly predictive of volume responsiveness.

  18. 7 CFR 1207.305 - Producer.

    Science.gov (United States)

    2010-01-01

    ... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE POTATO RESEARCH AND PROMOTION PLAN Potato Research and Promotion Plan Definitions § 1207.305 Producer. Producer means any person engaged...

  19. Microbially produced phytotoxins and plant disease management ...

    African Journals Online (AJOL)

    Microbially produced phytotoxins and plant disease management. ... African Journal of Biotechnology ... Pathogenic fungi and bacteria often damage their host (plants) tissues by producing toxic metabolites, which induced various symptoms ...

  20. Bacteriocin producers from traditional food products

    OpenAIRE

    Thonart P.; Destain J.; Tine E.; Ngom A.; Diop MB.; Dubois-Dauphin R.

    2007-01-01

    A total of 220 strains of LAB isolated from 32 samples of traditional fermented food from Senegal were screened for bacteriocin production. Two bacteriocin producers, Lactococcus lactis subsp. lactis and Enterococcus faecium, were identifi ed from 12 bacteriocin-producing isolates on the basis of phenotypic analyses and 16S rDNA sequence. Both bacteriocins produced by new isolates show antimicrobial activity against Listeria monocytogenes and Bacillus coagulans whereas only that produced by L...

  1. Complex Choices: Producers Risk Management Strategies

    OpenAIRE

    Pennings, Joost M.E.; Isengildina, Olga; Irwin, Scott H.; Good, Darrel L.; Garcia, Philip; Frank, Julieta; Kuiper, W. Erno

    2005-01-01

    Producers have a wide variety of risk management instruments available. How do producers make a choice of risk management instruments? Using the recently developed choice bracketing framework, we examine what risk management strategies producers use and identify the factors that drive their risk management decisions. Our results identify that producers use a wide variety of combinations of risk management instruments and that they bracket their choices into sets of alternative risk management...

  2. 血管外肺水和容量指标在感染性休克患者呼吸机撤离中的临床意义%Clinical value of extravascular lung water and preload parameters in weaning of mechanical ventilation in patients with septic shock

    Institute of Scientific and Technical Information of China (English)

    方明; 曾红科; 陈淼; 郑崇伟; 邓医宇; 胡北; 柳学; 黄伟平; 龙怡; 蒋文新

    2013-01-01

    Objective To investigate the values of extravascular lung water and preload parameters of weaning from mechanical ventilation on patients with septic shock.Methods A prospective study was conducted.A total of 52 septic shock patients with mechanical ventilation were enrolled from January 2010 to July 2012.All patients were treated and monitored by pulse induced continuous cardiac output (PiCCO) till they reached weaning criteria,and then spontaneous breathing trial (SBT),weaning,and extubation were performed in turn.The enrolled patients were divided into two groups including successful weaning group (n =38) and weaning failure group (n =14) according to clinical manifestations during 48 hours after weaning.Extravascular lung water index (EVLWI),preload parameters such as global end diastolic volume index (GEDVI) and intra-thoracic blood volume index (ITBVI),pulmonary vascular permeability index (PVPI) and N-terminal pro-B-type natriuretic peptide (NT-proBNP) were compared at the time before weaning,0.5 hour after weaning,0.5 hour after extubation,and time of weaning failure or 48 hours after weaning.The patients in weaning failure group were sub-divided into high PVPI group (PVPI ≥ 1.5 ml/m2) and low PVPI group (PVPI< 1.5 ml/m2),the NT-proBNP and pulmonary blood volume (PBV) were compared between two groups.Results Before weaning,there was no statistical difference in NT-proBNP,volume parameters and EVLWI between two groups.EVLWI,GEDVI,ITBVI,PVPI and log NT-proBNP were gradually increased after weaning and extubation in two groups.The EVLWI (ml/kg),PVPI (ml/m2) and log NT-proBNP were significantly higher at end point of observation in weaning failure group compared with those in successful weaning group (EVLWI:12.81 ± 2.13 vs.8.48 ± 1.53,PVPI:2.79 ± 1.29 vs.2.19 ± 0.94,log NT-proBNP:3.72 ± 0.35 vs.3.44 ± 0.28,P<0.05 or P<0.01).GEDVI (ml/m2),ITBVI (ml/m2) at 0.5 hour after weaning and end point of observation in weaning failure group were

  3. 7 CFR 1032.13 - Producer milk.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Producer milk. 1032.13 Section 1032.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE CENTRAL MARKETING AREA Order Regulating Handling Definitions § 1032.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

  4. 7 CFR 1006.13 - Producer milk.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Producer milk. 1006.13 Section 1006.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE FLORIDA MARKETING AREA Order Regulating Handling Definitions § 1006.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

  5. 7 CFR 1131.13 - Producer milk.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Producer milk. 1131.13 Section 1131.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE ARIZONA MARKETING AREA Order Regulating Handling Definitions § 1131.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

  6. 7 CFR 1001.13 - Producer milk.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Producer milk. 1001.13 Section 1001.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE NORTHEAST MARKETING AREA Order Regulating Handling Definitions § 1001.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

  7. 7 CFR 1126.13 - Producer milk.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Producer milk. 1126.13 Section 1126.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE SOUTHWEST MARKETING AREA Order Regulating Handling Definitions § 1126.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

  8. 7 CFR 1033.13 - Producer milk.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Producer milk. 1033.13 Section 1033.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE MIDEAST MARKETING AREA Order Regulating Handling Definitions § 1033.13 Producer milk. Producer milk means the skim milk (or the skim equivalent of...

  9. 29 CFR 780.213 - Produce business.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Produce business. 780.213 Section 780.213 Labor Regulations... Specific Situations Hatchery Operations § 780.213 Produce business. In some instances, hatcheries also engage in the produce business as such and commingle with the culled eggs and chickens other eggs and...

  10. 7 CFR 1219.20 - Producer.

    Science.gov (United States)

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE HASS AVOCADO PROMOTION, RESEARCH, AND INFORMATION Hass Avocado Promotion, Research, and Information Order Definitions § 1219.20 Producer. Producer means any person who is engaged in the business of producing Hass avocados in the United...

  11. Off shore produced water treatment with pertraction

    NARCIS (Netherlands)

    Klaassen, R.

    2004-01-01

    During the production of oil and gas also water is produced. This produced water contains dispersed and dissolved oil components. The impact of offshore emissions of produced water on the environment and the treatment of technologies for it are currently under discussion. Emission limits tend to bec

  12. 7 CFR 1218.16 - Producer.

    Science.gov (United States)

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE BLUEBERRY PROMOTION, RESEARCH, AND INFORMATION ORDER Blueberry Promotion, Research, and Information Order Definitions § 1218.16 Producer... is engaged in the business of producing, or causing to be produced for any market, blueberries...

  13. Produced Water Reinjection--the Way Out

    Institute of Scientific and Technical Information of China (English)

    Xia Huilan

    1997-01-01

    @@ It is the best way to make comprehensive utilization of produced water, save water and protect environment by treating oily produced water so as to make it meet the quality criteria for the water reinjected into the reservoir. So far, more than 46 produced water treatment stations and 148 reinjection stations have been built at Shengli oilfields.

  14. Dynamics of the Ecological Agroalimentary Produce Market

    Directory of Open Access Journals (Sweden)

    Cornelia Petroman

    2011-10-01

    Full Text Available The market of ecological agroalimentary produce in Romania tends to have a positive evolution, identical with the world market, according to the specialists in the field. The market of ecological produce in Romania is being developed: from the point of view of its life cycle, it is steadily going to the growth period. Since the appearance period passed away, now there is the unsatisfied need of green produce: the first producers able to meet this need have appeared and they have started to meet the needs related to these produce.

  15. Expansão volêmica em raquianestesia para cesariana: comparação entre cristalóide ou colóide Expansión volemica en raquianestesia para cesárea: comparación entre cristaloide y coloide Preload during spinal anesthesia for cesarean section: comparison between crystalloid and colloid solutions

    Directory of Open Access Journals (Sweden)

    Mônica Maria Siaulys Capel Cardoso

    2004-12-01

    media de tres valores sucesivos de presión arterial sistólica (PAS. La PS fue medida a cada minuto y se administró bolus de 0,2 mg de metaraminol, por vía venosa, para disminución de PS mayor que 10% y bolus de 0,4 mg para disminución de PS mayor que 20%. Al nacimiento se evaluó el índice de Apgar y se realizó gasometria de la arteria umbilical. El análisis estadístico fue hecho con los tests t de Student modificado y para igualdad de las variables (p BACKGROUND AND OBJECTIVES: Maternal hypotension is the most common complication following spinal anesthesia for cesarean section. This study aimed at comparing the incidence of hypotension and the need for vasopressors in patients submitted to cesarean section under spinal anesthesia following preload with either crystalloid or colloid (modified fluid gelatin. METHODS: Participated in this prospective study 50 term pregnant patients, physical status ASA I, submitted to cesarean section under spinal anesthesia. Patients were randomly allocated into two groups receiving preload as follows: Crystalloid group, 10 mL.kg-1 lactated Ringer; Colloid group, 10 mL.kg-1 colloid (modified fluid gelatin. Control blood pressure was defined as the mean of three successive systolic blood pressure (SBP values. SBP was measured at 1-minute intervals and 0.2 mg intravenous bolus of metaraminol was administered for SBP decrease above 10% of control blood pressure, and 0.4 mg bolus of the same drug for SBP decrease above 20% of control. Apgar score was evaluated after delivery and umbilical artery blood was sent for analysis. Modified Student's t test was used for statistical analysis and p < 0.05 was considered statistically significant. RESULTS: Hypotension 10% (100% and 100% of patients; hypotension 20% (72% and 72% of patients, nausea (4% and 8% of patients; vasopressor consumption (1.67± 0.89 mg and 1.88 ± 0.74 mg and umbilical artery pH (7.25 ± 0.04 and 7.26 ± 0.04, in Crystalloid and Colloid groups, respectively, were

  16. Inventory transparency for agricultural produce through IOT

    Science.gov (United States)

    Srinivasan, S. P.; Sorna Shanthi, D.; Anand, Aashish V.

    2017-06-01

    Re-structuring the practices of traditional inventory management is becoming more essential to optimize the supply chain transparency and accuracy of agricultural produce. A flexible and transparent inventory management system is becoming the need of any agricultural commodity. It was noticed that the major setback for the farmers who are the suppliers of the farm produce is due to poor supply chain integration. The recent advent technologies and IT explosion can bring up a greater impact in the process of storing, tracking, distributing and monitoring perishable agriculture produce of day to day life. The primary focus of this paper is to integrate IoT into inventory management and other inbound logistics management of agriculture produce. The unique features of agricultural produce like a prediction of supply, demand, the location of warehouses, distribution and tracking of inventory can be integrated through IoT. This paper proposes a conceptual framework for inventory management transparency involved in the supply chain of agriculture produce.

  17. Stable, fertile, high polyhydroxyalkanoate producing plants and methods of producing them

    Energy Technology Data Exchange (ETDEWEB)

    Bohmert-Tatarev, Karen; McAvoy, Susan; Peoples, Oliver P.; Snell, Kristi D.

    2015-08-04

    Transgenic plants that produce high levels of polyhydroxybutyrate and methods of producing them are provided. In a preferred embodiment the transgenic plants are produced using plastid transformation technologies and utilize genes which are codon optimized. Stably transformed plants able to produce greater than 10% dwt PHS in tissues are also provided.

  18. Bioavailability of isoflavones from soy products in equol producers and non-producers in Japanese women

    Directory of Open Access Journals (Sweden)

    Ayako Miura

    2016-12-01

    Conclusions: The results in this study suggest that bioavailability of isoflavones are different between equol producers and non-producers, because the 24 h urinary excretion of equol in the equol producers were significantly lower than those in the equol non-producers.

  19. Understanding producers' motives for adopting sustainable practices

    NARCIS (Netherlands)

    Trujillo-Barrera, Andres; Pennings, Joost M.E.; Hofenk, Dianne

    2016-01-01

    Understanding the motives and risk attitudes of producers to engage in sustainable practices is important for policy-makers who wish to increase the likelihood of adoption and improve the design of incentives. This article examines the underlying motives of producers to adopt sustainable

  20. 7 CFR 1030.13 - Producer milk.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Producer milk. 1030.13 Section 1030.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE UPPER MIDWEST MARKETING AREA Order Regulating Handling Definitions § 1030.13 Producer milk. Except as provided for in paragraph (e) of this section...

  1. 7 CFR 1005.13 - Producer milk.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Producer milk. 1005.13 Section 1005.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE APPALACHIAN MARKETING AREA Order Regulating Handling Definitions § 1005.13 Producer milk. Except as provided for in paragraph (e) of this section...

  2. 7 CFR 1007.13 - Producer milk.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Producer milk. 1007.13 Section 1007.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE SOUTHEAST MARKETING AREA Order Regulating Handling Definitions § 1007.13 Producer milk. Except as provided for in paragraph (e) of this section...

  3. 7 CFR 1124.13 - Producer milk.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Producer milk. 1124.13 Section 1124.13 Agriculture... and Orders; Milk), DEPARTMENT OF AGRICULTURE MILK IN THE PACIFIC NORTHWEST MARKETING AREA Order Regulating Handling Definitions § 1124.13 Producer milk. Except as provided for in paragraph (f) of this...

  4. Taxomyces andreanae : A Presumed Paclitaxel Producer Demystified?

    NARCIS (Netherlands)

    Staniek, Agata; Woerdenbag, Herman J.; Kayser, Oliver

    2009-01-01

    The 1990s brought an abundance of reports on paclitaxel-producing endophytes, initially heralded as a discovery having tremendous implications for cancer therapy. As the vision of large-scale fermentation tanks producing vast quantities of relatively inexpensive paclitaxel and novel taxanes has fade

  5. Automatic produce quality monitoring in Reefer containers

    NARCIS (Netherlands)

    Lukasse, L.J.S.; Sanders, M.G.; Kramer, de J.E.

    2003-01-01

    Current day perishable supply chains require intermediate points for manual produce quality inspection. Over the last decade international seatransport of fruit and vegetables in reefer containers has grown tremendously. Reefer containers may completely close the cold chain only if produce quality

  6. Music Teacher as Writer and Producer

    Science.gov (United States)

    Randles, Clint

    2012-01-01

    In this article I attempt to redefine the role of a music teacher as being more than a director, the more traditional term ascribed to this position. I do this by using descriptions of the role of "writer" and "producer" of student lives borrowed from music education philosophy, screenwriting, and professional music producers. This vision is…

  7. Exopolysaccharides produced by lactic acid bacteria

    NARCIS (Netherlands)

    Caggianiello, Graziano; Kleerebezem, Michiel; Spano, Giuseppe

    2016-01-01

    A wide range of lactic acid bacteria (LAB) is able to produce capsular or extracellular polysaccharides, with various chemical compositions and properties. Polysaccharides produced by LAB alter the rheological properties of the matrix in which they are dispersed, leading to typically viscous and

  8. 7 CFR 1206.16 - Producer.

    Science.gov (United States)

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.16 Producer. Producer means any person who is engaged in the production and sale of mangos in the United States and who owns,...

  9. 7 CFR 1206.8 - Foreign producer.

    Science.gov (United States)

    2010-01-01

    ... AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE MANGO PROMOTION, RESEARCH, AND INFORMATION Mango Promotion, Research, and Information Order Definitions § 1206.8 Foreign producer. Foreign producer means any person: (1) Who is engaged in the production and sale of mangos outside of the...

  10. Particular applications of food irradiation fresh produce

    Science.gov (United States)

    Prakash, Anuradha

    2016-12-01

    On fresh fruits and vegetables, irradiation at low and medium dose levels can effectively reduce microbial counts which can enhance safety, inhibit sprouting to extend shelf-life, and eliminate or sterilize insect pests which can serve to facilitate trade between countries. At the dose levels used for these purposes, the impact on quality is negligible. Despite the fact that regulations in many countries allow the use of irradiation for fresh produce, the technology remains under-utilized, even in the light of an increase in produce related disease outbreaks and the economic benefits of extended shelf life and reduced food waste. Putative concerns about consumer acceptance particularly for produce that is labeled as irradiated have deterred many companies from using irradiation and retailers to carry irradiated produce. This section highlights the commercial use of irradiation for fresh produce, other than phytosanitary irradiation which is covered in supplementary sections.

  11. Factors affecting success of agricultural producers groups

    Directory of Open Access Journals (Sweden)

    Aleksandra Chlebicka

    2011-01-01

    Full Text Available Poor organisation of agricultural markets in Poland remains one of the biggest problems for agricultural sector. There are about 510 agricultural producer groups, but only 2% of Polish farmers selling for market are members. Knowledge on cooperation determinants and different aspects of producer groups performance is crucial to build references for policy makers and producer groups’ managers. The aim of the article was to discuss factors affecting success of producers groups understood as a level of members’ satisfaction. Data for 2006 and 2011 from 30 producers groups in fruit and vegetable sector were analysed using logit model. Three determinants occurred to be statistically important: scope of a group functions, informal cooperation with farmers before starting a formal cooperation and homogeneity of farms.

  12. Mouse bone marrow cytogenetic damage produced by residues of tequila.

    Science.gov (United States)

    Madrigal-Bujaidar, E; Rojas, A; Ramos, A; Rosas, E; Díaz Barriga-Arceo, S

    1990-06-01

    Five concentrations (50-860 mg/kg) of residues obtained after distillation and lyophilization of commercial tequila were injected into mice for evaluation of chromosome aberrations, sister-chromatid exchanges, and proliferation kinetics in mouse bone marrow cells. Appropriate positive and negative controls were included. Our results showed significant dose-related increases of chromosomal aberrations starting at 50 mg/kg and for sister-chromatid exchanges at 430 mg/kg. Cellular proliferation kinetics showed no alterations. With these data we demonstrated that the residues of tequila are genotoxic in vivo.

  13. NEW METHOD OF SHORT-RANGE AND OVER-LOADING VACUUM PRELOADING DYNAMIC DRAINAGE CONSOLIDATION FOR REINFORCING DEEP SILT SOFT SOIL GROUND%短程超载真空预压动力排水固结法加固深厚淤泥软基工研究

    Institute of Scientific and Technical Information of China (English)

    张小龙; 刘宝臣; 吴名江; 李颖

    2012-01-01

    The paper proposes a new method of reinforcing deep and thick silt. The method uses the short-range and over-loading vacuum preloading dynamic drainage consolidation approach. It is based on the conclusion of soft soil drainage consolidation of S-T roundabout regularities. It is developed according to the characteristics of deep and thick silt soft soil in coastal areas and the requirements of engineering construction's substantial results. The approach also demonstrates that the primary consolidation settlement of deep and thick silt soft soil can be accomplished in a short time, under the optional regrouping of vacuum negative pressure and over-loading positive pressure as well as dynamic impact. The silt soft soil consolidation and settlement are capable of improving the intensity of the solid body while the ground surface dredged fill can become over-consolidating hard shell course under the dynamic impact. The consolidation of deep and thick silt soft soil can meet the requirements of ground bearing capacityand effectively control past-construction settlement and uneven settlement. The case study and the analysis as well asthe assessment of the effect of groundwork dealings show the feasibility and validity of this new method. It providesa new way of reinforcing deep and thick silt soft soil groundwork widely spread in coastal areas.%针对沿海地区深厚淤泥软土的特点和工程建设时效性的要求,本文在总结软土排水固结S-T曲线规律的基础上提出应用短程超载真空预压动力排水固结法加固深厚淤泥的方法,发现深厚淤泥软土在真空负压、超载正压和动力冲击三者优化组合的作用下,主固结沉降可在短时间内完成,土体强度提高的同时地表吹填土在动力冲击作用下形成超固结的硬壳层.深厚淤泥软土加固后能够满足地基承载力的要求并且能够有效控制工后沉降和不均匀沉降.并通过工程实例,对地基处理后的效果进行分析

  14. Bacteriocin producers from traditional food products

    Directory of Open Access Journals (Sweden)

    Thonart P.

    2007-01-01

    Full Text Available A total of 220 strains of LAB isolated from 32 samples of traditional fermented food from Senegal were screened for bacteriocin production. Two bacteriocin producers, Lactococcus lactis subsp. lactis and Enterococcus faecium, were identified from 12 bacteriocin-producing isolates on the basis of phenotypic analyses and 16S rDNA sequence. Both bacteriocins produced by new isolates show antimicrobial activity against Listeria monocytogenes and Bacillus coagulans whereas only that produced by Lactococcus lactis has an activity against Bacillus cereus. Bacteriocin-producing Lactococcus lactis strains were found in a variety of traditional foods indicating a high potential of growth of this strain in variable ecological complex environment. Partial 16S rDNA of the two bacteriocin producers obtained in this study has been registered to Genbank databases under the accession number AY971748 for Lactococcus lactis subsp. lactis (named CWBI-B1410 and AY971749 for Enterococcus faecium (named CWBI-B1411. The new bacteriocin-producing Lactococcus lactis subsp. lactis strain has been selected for identification and application of the bacteriocin to food preservation.

  15. Biocorrosion produced by Thiobacillus-like microorganisms.

    Science.gov (United States)

    López, A I; Marín, I; Amils, R

    1994-01-01

    Biocorrosion can be produced by many different microorganisms through diverse mechanisms. The biocorrosion produced by acidophilic microorganisms of the genus Thiobacillus is based on the production of sulfuric acid and ferric ion from pyrites or related mineral structures, as a result of the chemolithotrophic metabolism of these microorganisms. The products of this aerobic respiration are also powerful oxidant elements, which can produce chemical oxidations of other metallic structures. The Tinto River, a very unusual extremophilic habitat (pH around 2, and high concentration of ferric ion), product of the growth of strict chemolithotrophic microorganisms, is discussed as a model case.

  16. [Metabolomics analysis of taxadiene producing yeasts].

    Science.gov (United States)

    Yan, Huifang; Ding, Mingzhu; Yuan, Yingjin

    2014-02-01

    In order to study the inherent difference among terpenes producing yeasts from the point of metabolomics, we selected taxadiene producing yeasts as the model system. The changes of cellular metabolites during fermentation log phase of artificial functional yeasts were determined using metabolomics methods. The results represented that compared to W303-1A as a blank control, the metabolites in glycolysis, tricarboxylic acid cycle (TCA) cycle and several amino acids were influenced. And due to the changes of metabolites, the growth of cells was inhibited to a certain extent. Among the metabolites identified, citric acid content in taxadiene producing yeasts changed the most, the decreasing amplitude reached 90% or more. Therefore, citric acid can be a marker metabolite for the future study of artificial functional yeasts. The metabolomics analysis of taxadiene producing yeasts can provide more information in further studies on optimization of terpenes production in heterologous chassis.

  17. Producing Knowledge to Reduce Rhetorical Distance

    DEFF Research Database (Denmark)

    Kampf, Constance

    Producing Knowledge to Reduce Rhetorical Distance: Extending Identity and Engaging Mainstream Ideology via the Web Constance Kampf, Department of Research Knowledge Communication, Aarhus School of Business, Denmark McLuhan describes technologies as extensions -the wheel being an extension...

  18. An anaerobic mitochondrion that produces hydrogen

    NARCIS (Netherlands)

    Boxma, Brigitte; Graaf, Rob M. de; Staay, Georg W.M. van der; Alen, Theo A. van; Ricard, Guenola; Gabaldón, Toni; Hoek, Angela H.A.M. van; Moon-van der Staay, Seung Yeo; Koopman, Werner J.H.; Hellemond, Jaap J. van; Tielens, Aloysius G.M.; Friedrich, Thorsten; Veenhuis, Marten; Huynen, Martijn A.; Hackstein, Johannes H.P.

    2005-01-01

    Hydrogenosomes are organelles that produce ATP and hydrogen, and are found in various unrelated eukaryotes, such as anaerobic flagellates, chytridiomycete fungi and ciliates. Although all of these organelles generate hydrogen, the hydrogenosomes from these organisms are structurally and metabolicall

  19. Quest II produce quality research overview

    NARCIS (Netherlands)

    Lukasse, L.J.S.; Harkema, H.; Otma, E.C.; Paillart, M.J.M.

    2013-01-01

    The Quest II control algorithm (patent pending), developed by Wageningen UR Food & Biobased Research together with Maersk Line and Carrier Transicold, reduces the energy consumption of reefer containers by approx. 65% without impairing produce quality.

  20. Factors affecting effective performance of rural producers ...

    African Journals Online (AJOL)

    Mo

    Factors affecting effective performance of rural producers' organizations in the ... Linkages are vital for effective achievement of purposes and most RPOs (80%), had established them ..... Success: Learning from Instructive Experiences in Ru-.

  1. Do bacteria, not fish, produce 'fish kairomone'?

    NARCIS (Netherlands)

    Ringelberg, J.; Van Gool, E.

    1998-01-01

    Fish-associated chemicals enhance phototactic downward swimming in Daphnia. If perch were treated with the antibiotic ampicillin, this enhancement was significantly decreased. Therefore, not fish, but bacteria associated with fish, seem to produce this kairomone. [KEYWORDS: Diel vertical migration;

  2. Potential biosurfactant producing endophytic and epiphytic fungi ...

    African Journals Online (AJOL)

    João Marcelo Lima

    L., macrophytes collected from oil-contaminated waters, were studied to assess their potential for producing .... Surface tension is a common metric and direct method for monitoring the production ..... Isolation and purification of a new enamide ...

  3. 9 CFR 114.16 - Producing subsidiaries.

    Science.gov (United States)

    2010-01-01

    ... AGRICULTURE VIRUSES, SERUMS, TOXINS, AND ANALOGOUS PRODUCTS; ORGANISMS AND VECTORS PRODUCTION REQUIREMENTS FOR BIOLOGICAL PRODUCTS § 114.16 Producing subsidiaries. A serial or subserial of a biological product may...

  4. 7 CFR 1280.117 - Producer information.

    Science.gov (United States)

    2010-01-01

    ... AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE LAMB PROMOTION, RESEARCH, AND INFORMATION ORDER Lamb Promotion, Research, and Information Order Definitions § 1280.117 Producer information... information relating to production or marketing efficiencies, development of new markets, program activities...

  5. 7 CFR 926.7 - Producer.

    Science.gov (United States)

    2010-01-01

    ... of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE DATA COLLECTION, REPORTING AND RECORDKEEPING REQUIREMENTS APPLICABLE TO CRANBERRIES NOT SUBJECT TO THE CRANBERRY MARKETING ORDER § 926.7 Producer....

  6. Methods and systems for producing syngas

    Energy Technology Data Exchange (ETDEWEB)

    Hawkes, Grant L; O& #x27; Brien, James E; Stoots, Carl M; Herring, J. Stephen; McKellar, Michael G; Wood, Richard A; Carrington, Robert A; Boardman, Richard D

    2013-02-05

    Methods and systems are provided for producing syngas utilizing heat from thermochemical conversion of a carbonaceous fuel to support decomposition of at least one of water and carbon dioxide using one or more solid-oxide electrolysis cells. Simultaneous decomposition of carbon dioxide and water or steam by one or more solid-oxide electrolysis cells may be employed to produce hydrogen and carbon monoxide. A portion of oxygen produced from at least one of water and carbon dioxide using one or more solid-oxide electrolysis cells is fed at a controlled flow rate in a gasifier or combustor to oxidize the carbonaceous fuel to control the carbon dioxide to carbon monoxide ratio produced.

  7. An anaerobic mitochondrion that produces hydrogen

    NARCIS (Netherlands)

    Boxma, Brigitte; Graaf, Rob M. de; Staay, Georg W.M. van der; Alen, Theo A. van; Ricard, Guenola; Gabaldón, Toni; Hoek, Angela H.A.M. van; Moon-van der Staay, Seung Yeo; Koopman, Werner J.H.; Hellemond, Jaap J. van; Tielens, Aloysius G.M.; Friedrich, Thorsten; Veenhuis, Marten; Huynen, Martijn A.; Hackstein, Johannes H.P.

    2005-01-01

    Hydrogenosomes are organelles that produce ATP and hydrogen, and are found in various unrelated eukaryotes, such as anaerobic flagellates, chytridiomycete fungi and ciliates. Although all of these organelles generate hydrogen, the hydrogenosomes from these organisms are structurally and metabolicall

  8. Produced Water Management and Beneficial Use

    Energy Technology Data Exchange (ETDEWEB)

    Terry Brown; Carol Frost; Thomas Hayes; Leo Heath; Drew Johnson; David Lopez; Demian Saffer; Michael Urynowicz; John Wheaton; Mark Zoback

    2007-10-31

    Large quantities of water are associated with the production of coalbed methane (CBM) in the Powder River Basin (PRB) of Wyoming. The chemistry of co-produced water often makes it unsuitable for subsequent uses such as irrigated agriculture. However, co-produced waters have substantial potential for a variety of beneficial uses. Achieving this potential requires the development of appropriate water management strategies. There are several unique characteristics of co-produced water that make development of such management strategies a challenge. The production of CBM water follows an inverse pattern compared to traditional wells. CBM wells need to maintain low reservoir pressures to promote gas production. This need renders the reinjection of co-produced waters counterproductive. The unique water chemistry of co-produced water can reduce soil permeability, making surface disposal difficult. Unlike traditional petroleum operations where co-produced water is an undesirable by-product, co-produced water in the PRB often is potable, making it a highly valued resource in arid western states. This research project developed and evaluated a number of water management options potentially available to CBM operators. These options, which focus on cost-effective and environmentally-sound practices, fall into five topic areas: Minimization of Produced Water, Surface Disposal, Beneficial Use, Disposal by Injection and Water Treatment. The research project was managed by the Colorado Energy Research Institute (CERI) at the Colorado School of Mines (CSM) and involved personnel located at CERI, CSM, Stanford University, Pennsylvania State University, the University of Wyoming, the Argonne National Laboratory, the Gas Technology Institute, the Montana Bureau of Mining and Geology and PVES Inc., a private firm.

  9. Biologically produced sulfur particles and polysulfide ions

    OpenAIRE

    Kleinjan, W. E.

    2005-01-01

    This thesis deals with the effects of particles of biologically produced sulfur (or 'biosulfur') on a biotechnological process for the removal of hydrogen sulfide from gas streams. Particular emphasis is given to the role of polysulfide ions in such a process. These polysulfide ions are formed from reaction of sulfide with biologically produced sulfur. The basic concepts of this H 2 S removal process were developed at the department of Environmental Technology of Wageningen University and the...

  10. Producing oil wells; A steep downhill road

    Energy Technology Data Exchange (ETDEWEB)

    1990-02-01

    This paper discusses the effects of the drilling collapse of the past few years. Even with improved and relatively stable pricing, the severely impeded drilling climate-coupled with the continued decline of marginal wells-has caused a drop of 3.2{percent} in the total number of producing oil wells. Based on an annual survey of state and regional petroleum agencies, World Oil estimates that 603,365 oil wells are currently producing in the United States.

  11. Use of aflatoxin-producing ability medium to distinguish aflatoxin-producing strains of Aspergillus flavus.

    OpenAIRE

    1981-01-01

    Aflatoxin-producing ability medium was tested for its ability to distinguish aflatoxin-positive from aflatoxin-negative strains of Aspergillus flavus in naturally occurring populations from corn at harvest. All of the aflatoxin-positive strains and some of the aflatoxin-negative strains produced aflatoxins when cultured on cracked corn. Although the data indicate that aflatoxin-producing ability medium is not entirely reliable in distinguishing potential aflatoxin-producing strains of A. flav...

  12. Wintertime Emissions from Produced Water Ponds

    Science.gov (United States)

    Evans, J.; Lyman, S.; Mansfield, M. L.

    2013-12-01

    Every year oil and gas drilling in the U.S. generates billions of barrels of produced water (water brought to the surface during oil or gas production). Efficiently disposing of produced water presents a constant financial challenge for producers. The most noticeable disposal method in eastern Utah's Uintah Basin is the use of evaporation ponds. There are 427 acres of produced water ponds in the Uintah Basin, and these were used to evaporate more than 5 million barrels of produced water in 2012, 6% of all produced water in the Basin. Ozone concentrations exceeding EPA standards have been observed in the Uintah Basin during winter inversion conditions, with daily maximum 8 hour average concentrations at some research sites exceeding 150 parts per billion. Produced water contains ozone-forming volatile organic compounds (VOC) which escape into the atmosphere as the water is evaporated, potentially contributing to air quality problems. No peer-reviewed study of VOC emissions from produced water ponds has been reported, and filling this gap is essential for the development of accurate emissions inventories for the Uintah Basin and other air sheds with oil and gas production. Methane, carbon dioxide, and VOC emissions were measured at three separate pond facilities in the Uintah Basin in February and March of 2013 using a dynamic flux chamber. Pond emissions vary with meteorological conditions, so measurements of VOC emissions were collected during winter to obtain data relevant to periods of high ozone production. Much of the pond area at evaporation facilities was frozen during the study period, but areas that actively received water from trucks remained unfrozen. These areas accounted for 99.2% of total emissions but only 9.5% of the total pond area on average. Ice and snow on frozen ponds served as a cap, prohibiting VOC from being emitted into the atmosphere. Emissions of benzene, toluene, and other aromatic VOCs averaged over 150 mg m-2 h-1 from unfrozen pond

  13. ANAEROBIC BIOLOGICAL TREATMENT OF PRODUCED WATER

    Energy Technology Data Exchange (ETDEWEB)

    John R. Gallagher

    2001-07-31

    During the production of oil and gas, large amounts of water are brought to the surface and must be disposed of in an environmentally sensitive manner. This is an especially difficult problem in offshore production facilities where space is a major constraint. The chief regulatory criterion for produced water is oil and grease. Most facilities have little trouble meeting this criterion using conventional oil-water separation technologies. However, some operations have significant amounts of naphthenic acids in the water that behave as oil and grease but are not well removed by conventional technologies. Aerobic biological treatment of naphthenic acids in simulated-produced water has been demonstrated by others; however, the system was easily overloaded by the large amounts of low-molecular-weight organic acids often found in produced waters. The objective of this research was to determine the ability of an anaerobic biological system to treat these organic acids in a simulated produced water and to examine the potential for biodegradation of the naphthenic acids in the anaerobic environment. A small fixed-film anaerobic biological reactor was constructed and adapted to treat a simulated produced water. The bioreactor was tubular, with a low-density porous glass packing material. The inocula to the reactor was sediment from a produced-water holding pond from a municipal anaerobic digester and two salt-loving methanogenic bacteria. During start-up, the feed to the reactor contained glucose as well as typical produced-water components. When glucose was used, rapid gas production was observed. However, when glucose was eliminated and the major organic component was acetate, little gas was generated. Methane production from acetate may have been inhibited by the high salt concentrations, by sulfide, or because of the lack, despite seeding, of microbes capable of converting acetate to methane. Toluene, a minor component of the produced water (0.1 g/L) was removed in the

  14. Zirconium alloys produced by recycling zircaloy tunings

    Energy Technology Data Exchange (ETDEWEB)

    Gamba, N.S. [Instituto de Investigaciones en Catálisis y Petroquímica, INCAPE (FIQ, UNL–CONICET), Santiago del Estero 2829, 3000 Santa Fe (Argentina); Carbajal-Ramos, I.A. [Centro Atómico Bariloche, CNEA e Instituto Balseiro, Universidad Nacional de Cuyo, Av. Bustillo 9500, 8400 Bariloche (Argentina); Ulla, M.A.; Pierini, B.T. [Instituto de Investigaciones en Catálisis y Petroquímica, INCAPE (FIQ, UNL–CONICET), Santiago del Estero 2829, 3000 Santa Fe (Argentina); Gennari, F.C., E-mail: gennari@cab.cnea.gov.ar [Centro Atómico Bariloche, CNEA e Instituto Balseiro, Universidad Nacional de Cuyo, Av. Bustillo 9500, 8400 Bariloche (Argentina)

    2013-11-25

    Highlights: •Zr–Ti alloys were successfully produced by two-step procedure. •Zircaloy tunings were used as a valuable source of Zr. •Zircaloy tunings and Ti powders was milled under hydrogen to produce hydride powders. •Hydride powders were decomposed by heating at 900 °C to synthesize the Zr-based alloy. •The procedure could be extended to the production of other Zr-based alloys. -- Abstract: Zircaloy chips were recycled to successfully produce Zr–Ti alloys with bcc structure and different compositions. The procedure developed involves two steps. First, the reactive mechanical alloying (RMA) of the zircaloy tunings and Ti powders was performed to produce metal hydride powders, with a high refinement of the microstructure and a Zr–Ti homogeneous composition. Second, the metal hydride powders were thermally decomposed by heating up to 900 °C to synthesize the Zr-based alloy with a selected composition. The change in the nature of the powders from ductile to brittle during milling avoids both cold working phenomena between the metals and the use of a control agent. A minimum milling time is necessary to produce the solid solution with the selected composition. The microstructure and structure of the final alloys obtained was studied. The present procedure could be extended to the production of Zr-based alloys with the addition of other metals different from Ti.

  15. Producer-level benefits of sustainability certification.

    Science.gov (United States)

    Blackman, Allen; Rivera, Jorge

    2011-12-01

    Initiatives certifying that producers of goods and services adhere to defined environmental and social-welfare production standards are increasingly popular. According to proponents, these initiatives create financial incentives for producers to improve their environmental, social, and economic performance. We reviewed the evidence on whether these initiatives have such benefits. We identified peer-reviewed, ex post, producer-level studies in economic sectors in which certification is particularly prevalent (bananas, coffee, fish products, forest products, and tourism operations), classified these studies on the basis of whether their design and methods likely generated credible results, summarized findings from the studies with credible results, and considered how these findings might guide future research. We found 46 relevant studies, most of which focused on coffee and forest products and examined fair-trade and Forest Stewardship Council certification. The methods used in 11 studies likely generated credible results. Of these 11 studies, nine examined the economic effects and two the environmental effects of certification. The results of four of the 11 studies, all of which examined economic effects, showed that certification has producer-level benefits. Hence, the evidence to support the hypothesis that certification benefits the environment or producers is limited. More evidence could be generated by incorporating rigorous, independent evaluation into the design and implementation of projects promoting certification.

  16. Heidrun Testing Produced Water Reinjection (Pwri)

    Energy Technology Data Exchange (ETDEWEB)

    Paltiel, Sten [Statoil, Stavanger (Norway)

    2001-07-01

    On the Heidrun platform in the Norwegian Sea, Statoil is carrying out tests to determine the feasibility of re-injecting produced water into the reservoir. There are two main incentives for the implementation of PWRI: - Environmental gains through reduced discharge to sea, - Provides a source of low sulphate water, which is positive for the reservoir. The production wells on the field need pressure support, and produced water is an alternative to the sea water that is currently used for this purpose. The Heidrun reservoir has a great potential for producing scale due to the high content of barium sulphate. Experience so far shows that if scaling goes unchecked, a large portion of the oil will be non-recoverable. Well treatments also create separation problems when back flowing. This means that maintaining the 40 mg/l limit is a challenge. (author)

  17. Components and Treatments of Oilfield Produced Water

    Directory of Open Access Journals (Sweden)

    Essam Abdul-Jalil Saeed

    2010-01-01

    Full Text Available In this study, a review of variety of processes that are used in the treatment produced water prior to reuse or to responsible disposal are presented with their environmental issues and economical benefits. Samples of produced water from five locations in Rumaila oilfield/in south of Iraq were taken and analyzed for their contents of brine, some heavy metals, total suspended solids and oil and grease. Moreover, two samples of water were treated using reverse osmosis technique which showed its ability to treat such contaminated water. The results showed that the environmental impact of produced water arises from its chemical composition; i.e., its salt content, its heavy metals, and hydrocarbon contents.

  18. Producing Hydrogen by Plasma Pyrolysis of Methane

    Science.gov (United States)

    Atwater, James; Akse, James; Wheeler, Richard

    2010-01-01

    Plasma pyrolysis of methane has been investigated for utility as a process for producing hydrogen. This process was conceived as a means of recovering hydrogen from methane produced as a byproduct of operation of a life-support system aboard a spacecraft. On Earth, this process, when fully developed, could be a means of producing hydrogen (for use as a fuel) from methane in natural gas. The most closely related prior competing process - catalytic pyrolysis of methane - has several disadvantages: a) The reactor used in the process is highly susceptible to fouling and deactivation of the catalyst by carbon deposits, necessitating frequent regeneration or replacement of the catalyst. b) The reactor is highly susceptible to plugging by deposition of carbon within fixed beds, with consequent channeling of flow, high pressure drops, and severe limitations on mass transfer, all contributing to reductions in reactor efficiency. c) Reaction rates are intrinsically low. d) The energy demand of the process is high.

  19. Global Spread of Carbapenemase-producing Enterobacteriaceae

    Science.gov (United States)

    Naas, Thierry; Poirel, Laurent

    2011-01-01

    Carbapenemases increasingly have been reported in Enterobacteriaceae in the past 10 years. Klebsiella pneumoniae carbapenemases have been reported in the United States and then worldwide, with a marked endemicity at least in the United States and Greece. Metallo-enzymes (Verona integron–encoded metallo-β-lactamase, IMP) also have been reported worldwide, with a higher prevalence in southern Europe and Asia. Carbapenemases of the oxacillinase-48 type have been identified mostly in Mediterranean and European countries and in India. Recent identification of New Delhi metallo-β-lactamase-1 producers, originally in the United Kingdom, India, and Pakistan and now worldwide, is worrisome. Detection of infected patients and carriers with carbapenemase producers is necessary for prevention of their spread. Identification of the carbapenemase genes relies mostly on molecular techniques, whereas detection of carriers is possible by using screening culture media. This strategy may help prevent development of nosocomial outbreaks caused by carbapenemase producers, particularly K. pneumoniae. PMID:22000347

  20. Characterization of Soluble Organics in Produced Water

    Energy Technology Data Exchange (ETDEWEB)

    Bostick, D.T.

    2002-01-16

    Soluble organics in produced water and refinery effluents represent treatment problems for the petroleum industry. Neither the chemistry involved in the production of soluble organics nor the impact of these chemicals on total effluent toxicity is well understood. The U.S. Department of Energy provides funding for Oak Ridge National Laboratory (ORNL) to support a collaborative project with Shell, Chevron, Phillips, and Statoil entitled ''Petroleum and Environmental Research Forum project (PERF 9844: Manage Water-Soluble Organics in Produced Water''). The goal of this project, which involves characterization and evaluation of these water-soluble compounds, is aimed at reducing the future production of such contaminants. To determine the effect that various drilling conditions might have on water-soluble organics (WSO) content in produced water, a simulated brine water containing the principal inorganic components normally found in Gulf of Mexico (GOM) brine sources was prepared. The GOM simulant was then contacted with as-received crude oil from a deep well site to study the effects of water cut, produced-water pH, salinity, pressure, temperature, and crude oil sources on the type and content of the WSO in produced water. The identities of individual semivolatile organic compounds (SVOCs) were determined in all as-received crude and actual produced water samples using standard USEPA Method (8270C) protocol. These analyses were supplemented with the more general measurements of total petroleum hydrocarbon (TPH) content in the gas (C{sub 6}-C{sub 10}), diesel (C{sub 10}-C{sub 20}), and oil (C{sub 20}-C{sub 28}) carbon ranges as determined by both gas chromatographic (GC) and infrared (IR) analyses. An open liquid chromatographic procedure was also used to differentiate the saturated hydrocarbon, aromatic hydrocarbon, and polar components within the extractable TPH. Inorganic constituents in the produced water were analyzed by ion

  1. User community vs. producer innovation development efficiency

    DEFF Research Database (Denmark)

    Hienerth, Christoph; von Hippel, Eric; Jensen, Morten Berg

    2014-01-01

    In this paper we report upon a first empirical exploration of the relative efficiency of innovation development by product users vs. product producers. In a study of over 50 years of product innovation in the whitewater kayaking field, we find users in aggregate were approximately 3× more efficient...... at developing important kayaking product innovations than were producers in aggregate. We speculate that this result is driven by what we term “efficiencies of scope” in problem-solving. These can favor an aggregation of many user innovators, each spending a little, over fewer producer innovators benefitting...... from higher economies of scale in product development. We also note that the present study explores only one initial point on what is likely to be a complex efficiency landscape....

  2. Chryseobacterium indologenes, novel mannanase-producing bacteria

    Directory of Open Access Journals (Sweden)

    Surachai Rattanasuk

    2009-10-01

    Full Text Available Mannanase is a mannan degrading enzyme which is produced by microorganisms, including bacteria. This enzyme can be used in many industrial processes as well as for improving the quality of animal feeds. The aim of the present study was toscreen and characterize the mannanase-producing bacteria. Two genera of bacteria were isolated from Thai soil samples,fermented coconut, and fertilizer. Screening was carried out on agar plates containing mannan stained with iodine solution.The bacteria were identified by partial 16S rRNA gene sequence, biochemical test and morphology, respectively. The mannanase activity was determined by zymogram and DNS method. Two strains of bacteria with mannanase activity were identified as Bacillus and Chryseobacterium. This is the first report of mannanase-producing Chryseobacterium.

  3. Salmonella in beef and produce from honduras.

    Science.gov (United States)

    Maradiaga, Martha; Miller, Mark F; Thompson, Leslie; Pond, Ansen; Gragg, Sara E; Echeverry, Alejandro; Garcia, Lyda G; Loneragan, Guy H; Brashears, Mindy M

    2015-03-01

    Salmonella continues to cause a considerable number of foodborne illnesses worldwide. The sources of outbreaks include contaminated meat and produce. The purpose of this study was to establish an initial investigation of the burden of Salmonella in produce and beef from Honduras by sampling retail markets and abattoirs. Retail produce samples (cantaloupes, cilantro, cucumbers, leafy greens, peppers, and tomatoes; n = 573) were purchased in three major cities of Honduras, and retail whole-muscle beef (n = 555) samples were also purchased in four major cities. Additionally, both hide and beef carcass (n = 141) samples were collected from two Honduran abattoirs. Whole-muscle beef samples were obtained using a sponge hydrated with buffered peptone water, and 10 ml of the buffered peptone water rinsate of each produce sample was collected with a dry sponge and placed in a bag to be transported back to the United States. Salmonella was detected using a commercially available, closeplatform PCR system, and positive samples were subjected to culture on selective media to obtain isolates. Overall, the prevalence of Salmonella-positive samples, based on PCR detection in Honduras (n = 555) retail beef was 10.1% (95% confidence interval = 7.8, 12.9), whereas 7.8% (n = 141) of beef carcass and hides samples were positive in both beef plants. The overall Salmonella prevalence for all produce samples (n = 573) collected was 2.1% (95% confidence interval = 1.2, 3.6). The most common serotypes identified in Honduras were Salmonella Typhimurium followed by Derby. These results provide an indication of Salmonella contamination of beef and produce in Honduras. Developing a Salmonella baseline for Latin America through an initial investigation like the one presented here contributes to a broader global understanding of the potential exposure through food, thus providing insight into the needs for control strategies.

  4. Neutrons produced by muons at 25 mwe

    Science.gov (United States)

    Dragić, A.; Aničin, I.; Banjanac, R.; Udovičić, V.; Joković, D.; Maletić, D.; Savić, M.; Veselinović, N.; Puzović, J.

    2013-02-01

    The flux of fast neutrons produced by CR muons in lead at the depth of 25 mwe is measured. Lead is a common shielding material and neutrons produced in it in muon interactions are unavoidable background component, even in sensitive deep underground experiments. A low background gamma spectrometer, equipped with high purity Ge detector in coincidence with muon detector is used for this purpose. Neutrons are identified by the structure at 692 KeV in the spectrum of delayed coincidences, caused by the neutron inelastic scattering on Ge-72 isotope. Preliminary result for the fast neutron rate is 3.1(5) × 10--4n/cm2 · s.

  5. Exceptional Antibodies Produced by Successive Immunizations.

    Directory of Open Access Journals (Sweden)

    Patricia J Gearhart

    2015-12-01

    Full Text Available Antibodies stand between us and pathogens. Viruses mutate quickly to avoid detection, and antibodies mutate at similar rates to hunt them down. This death spiral is fueled by specialized proteins and error-prone polymerases that change DNA sequences. Here, we explore how B lymphocytes stay in the race by expressing activation-induced deaminase, which unleashes a tsunami of mutations in the immunoglobulin loci. This produces random DNA substitutions, followed by selection for the highest affinity antibodies. We may be able to manipulate the process to produce better antibodies by expanding the repertoire of specific B cells through successive vaccinations.

  6. Methods for producing silicon carbide fibers

    Energy Technology Data Exchange (ETDEWEB)

    Garnier, John E.; Griffith, George W.

    2016-03-01

    Methods of producing silicon carbide fibers. The method comprises reacting a continuous carbon fiber material and a silicon-containing gas in a reaction chamber at a temperature ranging from approximately 1500.degree. C. to approximately 2000.degree. C. A partial pressure of oxygen in the reaction chamber is maintained at less than approximately 1.01.times.10.sup.2 Pascal to produce continuous alpha silicon carbide fibers. Continuous alpha silicon carbide fibers and articles formed from the continuous alpha silicon carbide fibers are also disclosed.

  7. Alkaloids produced by endophytic fungi: a review.

    Science.gov (United States)

    Zhang, Yanyan; Han, Ting; Ming, Qianliang; Wu, Lingshang; Rahman, Khalid; Qin, Luping

    2012-07-01

    In recent years, a number of alkaloids have been discovered from endophytic fungi in plants, which exhibited excellent biological properties such as antimicrobial, insecticidal, cytotoxic, and anticancer activities. This review mainly deals with the research progress on endophytic fungi for producing bioactive alkaloids such as quinoline and isoquinoline, amines and amides, indole derivatives, pyridines, and quinazolines. The biological activities and action mechanisms of these alkaloids from endophytic fungi are also introduced. Furthermore, the relationships between alkaloid-producing endophytes and their host plants, as well as their potential applications in the future are discussed.

  8. Methods for producing reinforced carbon nanotubes

    Science.gov (United States)

    Ren, Zhifen; Wen, Jian Guo; Lao, Jing Y.; Li, Wenzhi

    2008-10-28

    Methods for producing reinforced carbon nanotubes having a plurality of microparticulate carbide or oxide materials formed substantially on the surface of such reinforced carbon nanotubes composite materials are disclosed. In particular, the present invention provides reinforced carbon nanotubes (CNTs) having a plurality of boron carbide nanolumps formed substantially on a surface of the reinforced CNTs that provide a reinforcing effect on CNTs, enabling their use as effective reinforcing fillers for matrix materials to give high-strength composites. The present invention also provides methods for producing such carbide reinforced CNTs.

  9. Activation of histamine H3 receptors produces presynaptic inhibition of neurally evoked cat nictitating membrane responses in vivo.

    Science.gov (United States)

    Koss, M C; Hey, J A

    1992-08-01

    This study was undertaken in order to determine the potential role of prejunctional histamine H3 receptors in an in vivo adrenergic model system. Frequency-dependent nictitating membrane responses were elicited by sympathetic nerve stimulation in anesthetized cats. Systemic administration of the selective histamine H3 receptor agonist, (R)-alpha-methylhistamine (R alpha MeHA) produced a dose-related depression of amplitude of the evoked nictitating membrane responses with a threshold of about 10 micrograms/kg and maximal effect (50% depression at the lowest frequency; 0.5 Hz) seen at 100-300 micrograms/kg. Responses obtained with low frequency stimulation were more sensitive to depression by R alpha MeHA than were responses evoked with higher frequencies of stimulation. Larger doses of R alpha MeHA given to the same animals, failed to produce additional inhibition. R alpha MeHA depressed the amplitude of nictitating membrane responses evoked by either pre- or postganglionic nerve stimulation to an equivalent degree. This depressant action of R alpha MeHA was antagonized by pretreatment with the specific histamine H3 antagonist, thioperamide (3 mg/kg), but not by combined pretreatment with histamine H1 and H2 blockers chlorpheniramine (300 micrograms/kg) and cimetidine (5 mg/kg). Intravenous administration of adrenaline (1-30 micrograms/kg) also produced graded nictitating membrane responses that were not altered by subsequent administration of R alpha MeHA. These results suggest that histamine H3 receptors are involved in the modulation of neurally evoked noradrenaline release in the cat nictitating membrane by an inhibitory presynaptic action.(ABSTRACT TRUNCATED AT 250 WORDS)

  10. Earth's Most Important Producers: Meet the Phytoplankton!

    Science.gov (United States)

    Marrero, Meghan E.; Stevens, Nicole

    2011-01-01

    The ocean is home to some of Earth's most important producers. Single-celled organisms in the ocean are responsible for more than half of Earth's productivity, as well as most of its oxygen. Phytoplankton are single-celled, plantlike organisms. That is, they have chloroplasts and perform photosynthesis, but are not true plants, which are typically…

  11. Climate forecasts for corn producer decision making

    Science.gov (United States)

    Corn is the most widely grown crop in the Americas, with annual production in the United States of approximately 332 million metric tons. Improved climate forecasts, together with climate-related decision tools for corn producers based on these improved forecasts, could substantially reduce uncertai...

  12. Urban Stories : Producing news for urban youth

    NARCIS (Netherlands)

    Hermes, Joke; Graaf, Christa de

    2015-01-01

    This paper will query whether a dedicated news platform can attune to young people’s civic needs? That is to ask: can this be a space that follows a social media logic of conversation and ‘give and take’ – with producers and consumers changing roles or even losing the distinction? How could and woul

  13. Transforming business education to produce global managers

    NARCIS (Netherlands)

    Kedia, Ben L.; Englis-Danskin, Paula

    2011-01-01

    In recent years, globalization of businesses has occurred faster than the internationalization of business schools—in terms of faculty, students, and curriculum. Indeed, there is now a disconnect between global economic realities and the ability of business schools to produce global managers. This

  14. Poultry Producer. Ohio's Competency Analysis Profile.

    Science.gov (United States)

    Ohio State Univ., Columbus. Vocational Instructional Materials Lab.

    This Ohio Competency Analysis Profile (OCAP), derived from a modified Developing a Curriculum (DACUM) process, is a comprehensive and verified employer competency list for a poultry producer program. It contains units (with or without subunits), competencies, and competency builders that identify the occupational, academic, and employability…

  15. PV producers must advertise; Werbung wird wichtiger

    Energy Technology Data Exchange (ETDEWEB)

    Seltmann, T.

    2001-01-12

    Producers of current inverters are profiting from the growing PV market. The bigger suppliers are enhancing their advertising and marketing efforts while smaller suppliers opt for high-efficiency technology. [German] Vom kraeftigen Wachstum des Photovoltaik-Marktes profitieren zwangslaeufig auch die Wechselrichter-Hersteller. Die groesseren Anbieter verstaerken Vertrieb und Marketing, waehrend die kleineren versuchen, mit besonders effizienter Technik zu glaenzen. (orig.)

  16. Functionally graded materials produced by laser cladding

    NARCIS (Netherlands)

    Pei, Y.T.; Hosson, J.Th.M. De

    2000-01-01

    AlSi40 functionally graded materials (FGMs) were produced by a one-step laser cladding process on cast Al-alloy substrate as a possible solution for interfacial problems often present in laser coatings. The microstructure of the FGMs consists of a large amount of silicon primary particles surrounded

  17. An anaerobic mitochondrion that produces hydrogen

    NARCIS (Netherlands)

    Boxma, B.; Graaf, de R.M.; Staay, van der G.W.M.; Alen, T.A.; Richard, G.; Gabalon, T.; Hoek, van A.H.A.M.; Moon - van der Staay, S.Y.; Koopman, W.J.H.; Hellemond, van J.J.; Tielens, A.G.M.; Friedrich, T.; Veenhuis, M.; Huynen, M.A.; Hackstein, J.H.P.

    2005-01-01

    Hydrogenosomes are organelles that produce ATP and hydrogen(1), and are found in various unrelated eukaryotes, such as anaerobic flagellates, chytridiomycete fungi and ciliates(2). Although all of these organelles generate hydrogen, the hydrogenosomes from these organisms are structurally and metabo

  18. Chalco:Leading Nonferrous Metal Producer

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ China Aluminum Corporation Limited (Chalco) is an alumina producerand supplier holding the first place in China and the second place in the world. It is also a primary aluminum producer and supplier holding the first place in China and the sixth place in the world.

  19. Boron carbide whiskers produced by vapor deposition

    Science.gov (United States)

    1965-01-01

    Boron carbide whiskers have an excellent combination of properties for use as a reinforcement material. They are produced by vaporizing boron carbide powder and condensing the vapors on a substrate. Certain catalysts promote the growth rate and size of the whiskers.

  20. Producing biodiesel from soybeans in Zambia

    NARCIS (Netherlands)

    Drabik, Dusan; Gorter, de Harry; Timilsina, Govinda R.

    2016-01-01

    Facing a huge fiscal burden due to imports of its entire petroleum demand in the face of ample supply of agricultural land to produce biofuels, Zambia has recently introduced a biofuel mandate. However, a number of questions, particularly those related to the economics of biofuels, have not been

  1. Producing biodiesel from soybeans in Zambia

    NARCIS (Netherlands)

    Drabik, Dusan; Gorter, de Harry; Timilsina, Govinda R.

    2016-01-01

    Facing a huge fiscal burden due to imports of its entire petroleum demand in the face of ample supply of agricultural land to produce biofuels, Zambia has recently introduced a biofuel mandate. However, a number of questions, particularly those related to the economics of biofuels, have not been

  2. Produce Your Own: A Community Gardening Program

    Science.gov (United States)

    Miller, JoLynn; Arnold, Shannon

    2012-01-01

    Many County Extension offices offer an adult Master Gardener Program, which includes advanced gardening training, short courses, newsletters, and conferences. However, with the comprehensive training provided comes a large time commitment. The Produce Your Own program was created to introduce adults to gardening in a similar manner, but with…

  3. Carbapenemase-producing Organism in Food

    Centers for Disease Control (CDC) Podcasts

    2014-08-06

    Dr. Mike Miller reads an abridged version of the article, Carbapenemase-producing Organism in Food.  Created: 8/6/2014 by National Center for Emerging and Zoonotic Infectious Diseases (NCEZID).   Date Released: 8/13/2014.

  4. A reappraisal of fungi producing aflatoxins

    DEFF Research Database (Denmark)

    Varga, János; Frisvad, Jens Christian; Samson, Robert A.

    2009-01-01

    Aflatoxins are decaketide-derived secondary metabolites which are produced by a complex biosynthetic pathway. Aflatoxins are among the economically most important mycotoxins. Aflatoxin B1 exhibits hepatocarcinogenic and hepatotoxic properties, and is frequently referred to as the most potent natu...

  5. Silicon waveguides produced by wafer bonding

    DEFF Research Database (Denmark)

    Poulsen, Mette; Jensen, Flemming; Bunk, Oliver

    2005-01-01

    X-ray waveguides are successfully produced employing standard silicon technology of UV photolithography and wafer bonding. Contrary to theoretical expectations for similar systems even 100 mu m broad guides of less than 80 nm height do not collapse and can be used as one dimensional waveguides...

  6. Functionally graded materials produced by laser cladding

    NARCIS (Netherlands)

    Pei, Y.T.; Hosson, J.Th.M. De

    2000-01-01

    AlSi40 functionally graded materials (FGMs) were produced by a one-step laser cladding process on cast Al-alloy substrate as a possible solution for interfacial problems often present in laser coatings. The microstructure of the FGMs consists of a large amount of silicon primary particles surrounded

  7. Functionally Graded Materials Produced by Laser Cladding

    NARCIS (Netherlands)

    Pei, Y.T.; Hosson, J.Th.M. De

    2000-01-01

    AlSi40 functionally graded materials (FGMs) were produced by a one-step laser cladding process on cast Al-alloy substrate as a possible solution for interfacial problems often present in laser coatings. The microstructure of the FGMs consists of a large amount of silicon primary particles surrounded

  8. Pricing Electricity in Pools With Wind Producers

    DEFF Research Database (Denmark)

    Morales González, Juan Miguel; Conejo, A. J.; Kai Liu

    2012-01-01

    This paper considers an electricity pool that includes a significant number of wind producers and is cleared through a network-constrained auction, one day in advance and on an hourly basis. The hourly auction is formulated as a two-stage stochastic programming problem, where the first stage repr...

  9. Method of producing purified carotenoid compounds

    Science.gov (United States)

    Eggink, Laura (Inventor)

    2007-01-01

    A method of producing a carotenoid in solid form includes culturing a strain of Chlorophyta algae cells in a minimal inorganic medium and separating the algae comprising a solid form of carotenoid. In one embodiment f the invention, the strain of Chlorophyta algae cells includes a strain f Chlamydomonas algae cells.

  10. How Can We Best Produce Courseware?

    Science.gov (United States)

    Hitchens, Howard

    Several models exist for production methods that can be used in the development of instructional materials for use in television- or computer-based instructional programs. These models include the established audiovisual industry that currently produces educational films and similar materials; consortia of educational institutions sharing in the…

  11. Chemicals that produce anosmia in mosquitoes

    Science.gov (United States)

    The United States Department of Agriculture (USDA) has developed repellents and insecticides for the U.S. military since 1942. A small component of this research program has been focused on the discovery of attractants that can be used to produce potent lures for haematophagous arthropods, especial...

  12. CHARACTERIZING THE PSYCHOLOGICAL STATE PRODUCED BY LSD.

    Science.gov (United States)

    KATZ, MARTIN M.; AND OTHERS

    THE DEVELOPMENT AND COMPONENTS OF LYSERGIC ACID DIETHYLAMIDE (LSD) PRODUCED PSYCHOLOGICAL STATES ARE INVESTIGATED. THE SUBJECTS WERE PAID VOLUNTEERS FROM THE PATUXENT INSTITUTION, A TREATMENT CENTER FOR EMOTIONALLY UNSTABLE CRIMINAL OFFENDERS. IN ONE STUDY, GROUPS OF 23 SUBJECTS RECEIVED LSD, AN AMPHETAMINE, OR A PLACEBO. IN THE SECOND STUDY, 11…

  13. Methods of producing continuous boron carbide fibers

    Energy Technology Data Exchange (ETDEWEB)

    Garnier, John E.; Griffith, George W.

    2015-12-01

    Methods of producing continuous boron carbide fibers. The method comprises reacting a continuous carbon fiber material and a boron oxide gas within a temperature range of from approximately 1400.degree. C. to approximately 2200.degree. C. Continuous boron carbide fibers, continuous fibers comprising boron carbide, and articles including at least a boron carbide coating are also disclosed.

  14. Tower Power: Producing Fuels from Solar Energy

    Science.gov (United States)

    Antal, M. J., Jr.

    1976-01-01

    This article examines the use of power tower technologies for the production of synthetic fuels. This process overcomes the limitations of other processes by using a solar furnace to drive endothermic fuel producing reactions and the resulting fuels serve as a medium for storing solar energy. (BT)

  15. Transforming business education to produce global managers

    NARCIS (Netherlands)

    Kedia, Ben L.; Englis, Paula D.

    2011-01-01

    In recent years, globalization of businesses has occurred faster than the internationalization of business schools—in terms of faculty, students, and curriculum. Indeed, there is now a disconnect between global economic realities and the ability of business schools to produce global managers. This a

  16. Producing and Scrounging during Problem Based Learning

    Science.gov (United States)

    Vickery, William L.

    2013-01-01

    When problem based learning occurs in a social context it is open to a common social behaviour, scrounging. In the animal behaviour literature, scroungers do not attempt to find resources themselves but rather exploit resources found by other group members (referred to as producers). We know from studies of animal behaviour (including humans) that…

  17. Secondary Particles Produced by Hadron Therapy

    Directory of Open Access Journals (Sweden)

    Abdolkazem Ansarinejad

    2015-07-01

    Full Text Available Introduction Use of hadron therapy as an advanced radiotherapy technique is increasing. In this method, secondary particles are produced through primary beam interactions with the beam-transport system and the patient’s body. In this study, Monte Carlo simulations were employed to determine the dose of produced secondary particles, particularly neutrons during treatment. Materials and Methods In this study, secondary particles, produced by proton and ion beams, were simulated for a cancer treatment plan. In particular, we evaluated the distribution of secondary neutrons, produced by a 400 MeV/u carbon beam on an electronic crate, which was exposed to radiation field under radioactive conditions. The level of major secondary particles, particularly neutrons, irradiating the target, was evaluated, using FLUKA Monte Carlo code. Results The fluences and radiation doses were applied to determine the shielding efficiency of devices and the probability of radiation damage to nearby electronic systems. According to the results, by using maximum-energy carbon ions (400 MeV/u, electronic devices are exposed to a dose rate of 0.05 µSv/s and an integrated dose of about 34 mSv, each year. Conclusion The simulation results could provide significant information about radiation assessment; they could also be a major help for clinical facilities to meet shielding requirements. Moreover, such simulations are essential for determining the radiation level, which is responsible for radiation-induced damages.

  18. User producer interaction in context: a classification

    NARCIS (Netherlands)

    Nahuis, Roel; Moors, Ellen; Smits, Ruud

    2009-01-01

    Science, Technology and Innovation Studies show that intensified user producer interaction (UPI) increases chances for successful innovations, especially in the case of emerging technology. It is not always clear, however, what type of interaction is necessary in a particular context. This paper pro

  19. Method of producing a chemical hydride

    Science.gov (United States)

    Klingler, Kerry M.; Zollinger, William T.; Wilding, Bruce M.; Bingham, Dennis N.; Wendt, Kraig M.

    2007-11-13

    A method of producing a chemical hydride is described and which includes selecting a composition having chemical bonds and which is capable of forming a chemical hydride; providing a source of a hydrocarbon; and reacting the composition with the source of the hydrocarbon to generate a chemical hydride.

  20. Producing Student Films: Shakespeare on Screen.

    Science.gov (United States)

    Franek, Mark

    1996-01-01

    Makes a case for asking students to produce their own film version of Shakespeare's "A Midsummer Night's Dream." Explains how to manage student filming projects logistically; how to teach students about filming techniques through the study of modern movies; and how filming becomes a lesson in the interpretation of Shakespeare. (TB)

  1. The Top American Indian Degree Producers

    Science.gov (United States)

    Diverse: Issues in Higher Education, 2012

    2012-01-01

    Each year, "Diverse: Issues In Higher Education" publishes lists of the Top 100 producers of associate, bachelor's and graduate degrees awarded to minority students based on research conducted by Dr. Victor M.H. Borden, professor of educational leadership and policy studies at the Indiana University Bloomington. This year, Diverse staff…

  2. Process and apparatus for producing coated particles

    NARCIS (Netherlands)

    Van Ommen, J.R.; Ellis, N.; Yurteri, C.; Marijnissen, J.C.M.

    2010-01-01

    The invention is directed to a process and apparatus for preparing coated particles, in particular a process for preparing particles that are coated with small particles using electrospraying. The coated particles produced according to the present invention find use for instance as catalysts or as

  3. Process for producing a fried foodstuff

    NARCIS (Netherlands)

    Eijck, van P.C.M.; Waele, de E.T.

    1997-01-01

    A process for producing fried starch-containing foodstuffs is described, comprising a thermal treatment resulting in gelatinisation of starch, partial frying, cooling, optional freezing and optional finishing, wherein the foodstuff is subjected to a mechanical surface treatment between said thermal

  4. 7 CFR 955.9 - Producer.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Producer. 955.9 Section 955.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF AGRICULTURE VIDALIA ONIONS GROWN IN GEORGIA...

  5. How to Produce a Small Newspaper.

    Science.gov (United States)

    Miller, Edward; And Others

    A how-to manual for people interested in the mechanics of newspaper production, this book was produced by the editors of a small town newspaper. Chapters about content, printing, typography, pasteup, design and layout, advertising, circulation and distribution, financial matters, and deadlines contain practical discussions of details such as what…

  6. Biologically produced sulfur particles and polysulfide ions

    NARCIS (Netherlands)

    Kleinjan, W.E.

    2005-01-01

    This thesis deals with the effects of particles of biologically produced sulfur (or 'biosulfur') on a biotechnological process for the removal of hydrogen sulfide from gas streams. Particular emphasis is given to the role of polysulfide ions in such a process. These polysul

  7. Process of producing mannitol and homopolysaccharides

    NARCIS (Netherlands)

    Geel-Schutten, Gerritdina Hendrika van; Binnema, Doede J.; van der Maarel, Marc

    2004-01-01

    The present invention relates to a process producing mannitol and one or more homopolysaccharides by bacteria. The bacteria according to the invention express mannitol-2-dehydrogenase activity and one or more sucrase activities. Preferably, the bacteria are lactic acid bacteria and more preferably t

  8. Biologically produced sulfur particles and polysulfide ions

    NARCIS (Netherlands)

    Kleinjan, W.E.

    2005-01-01

    This thesis deals with the effects of particles of biologically produced sulfur (or 'biosulfur') on a biotechnological process for the removal of hydrogen sulfide from gas streams. Particular emphasis is given to the role of polysulfide ions in such a process. These

  9. Beneficial Reuse of San Ardo Produced Water

    Energy Technology Data Exchange (ETDEWEB)

    Robert A. Liske

    2006-07-31

    This DOE funded study was performed to evaluate the potential for treatment and beneficial reuse of produced water from the San Ardo oilfield in Monterey County, CA. The potential benefits of a successful full-scale implementation of this project include improvements in oil production efficiency and additional recoverable oil reserves as well as the addition of a new reclaimed water resource. The overall project was conducted in two Phases. Phase I identified and evaluated potential end uses for the treated produced water, established treated water quality objectives, reviewed regulations related to treatment, transport, storage and use of the treated produced water, and investigated various water treatment technology options. Phase II involved the construction and operation of a small-scale water treatment pilot facility to evaluate the process's performance on produced water from the San Ardo oilfield. Cost estimates for a potential full-scale facility were also developed. Potential end uses identified for the treated water include (1) agricultural use near the oilfield, (2) use by Monterey County Water Resources Agency (MCWRA) for the Salinas Valley Water Project or Castroville Seawater Intrusion Project, (3) industrial or power plant use in King City, and (4) use for wetlands creation in the Salinas Basin. All of these uses were found to have major obstacles that prevent full-scale implementation. An additional option for potential reuse of the treated produced water was subsequently identified. That option involves using the treated produced water to recharge groundwater in the vicinity of the oil field. The recharge option may avoid the limitations that the other reuse options face. The water treatment pilot process utilized: (1) warm precipitation softening to remove hardness and silica, (2) evaporative cooling to meet downstream temperature limitations and facilitate removal of ammonia, and (3) reverse osmosis (RO) for removal of dissolved salts, boron

  10. Characterization of aerosols produced by surgical procedures

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, H.C.; Muggenburg, B.A.; Lundgren, D.L.; Guilmette, R.A.; Snipes, M.B.; Jones, R.K. [Inhalation Toxicology Research Institute, Albuquerque, NM (United States); Turner, R.S. [Lovelace Health Systems, Albuquerque, NM (United States)

    1994-07-01

    In many surgeries, especially orthopedic procedures, power tools such as saws and drills are used. These tools may produce aerosolized blood and other biological material from bone and soft tissues. Surgical lasers and electrocautery tools can also produce aerosols when tissues are vaporized and condensed. Studies have been reported in the literature concerning production of aerosols during surgery, and some of these aerosols may contain infectious material. Garden et al. (1988) reported the presence of papilloma virus DNA in the fumes produced from laser surgery, but the infectivity of the aerosol was not assessed. Moon and Nininger (1989) measured the size distribution and production rate of emissions from laser surgery and found that particles were generally less than 0.5 {mu}m diameter. More recently there has been concern expressed over the production of aerosolized blood during surgical procedures that require power tools. In an in vitro study, the production of an aerosol containing the human immunodeficiency virus (HIV) was reported when power tools were used to cut tissues with blood infected with HIV. Another study measured the size distribution of blood aerosols produced by surgical power tools and found blood-containing particles in a number of size ranges. Health care workers are anxious and concerned about whether surgically produced aerosols are inspirable and can contain viable pathogens such as HIV. Other pathogens such as hepatitis B virus (HBV) are also of concern. The Occupational Safety and Health funded a project at the National Institute for Inhalation Toxicology Research Institute to assess the extent of aerosolization of blood and other tissues during surgical procedures. This document reports details of the experimental and sampling approach, methods, analyses, and results on potential production of blood-associated aerosols from surgical procedures in the laboratory and in the hospital surgical suite.

  11. Dominance of IMP-4-Producing Enterobacter cloacae among Carbapenemase-Producing Enterobacteriaceae in Australia

    Science.gov (United States)

    Townell, Nicola; Nimmo, Graeme R.; George, Narelle M.; Robson, Jennifer; Vohra, Renu; Davis, Louise; Heney, Claire; Paterson, David L.

    2015-01-01

    The prevalence of carbapenemase-producing Enterobacteriaceae (CPE) has been increasing worldwide. blaIMP has been reported to be the predominant carbapenemase-encoding gene within Enterobacteriaceae in Australia. However, there are limited data currently available on CPE from Queensland, Australia. A total of 58 CPE isolates were isolated between July 2009 and March 2014 from Queensland hospitals. The clonality of isolates was determined by Diversilab repetitive sequence-based PCR. The isolates were investigated for the resistance mechanisms carbapenemase, extended-spectrum β-lactamase, and AmpC β-lactamase and for aminoglycoside resistance and plasmid-mediated quinolone resistance genes by PCR. The plasmid types associated with carbapenemase-encoding genes were characterized. The majority of the CPE were Enterobacter cloacae (n = 29). The majority of Queensland CPE isolates were IMP producers and comprised 11 species (n = 48). Nine NDM-producing Enterobacteriaceae were identified. One NDM-producing Klebsiella pneumoniae isolate coproduced OXA-48. One K. pneumoniae isolate was an OXA-181 producer. The incidence of IMP producers increased significantly in 2013. blaIMP-4 was found in all IMP-producing isolates. blaTEM, qnrB, and aacA4 were common among IMP-4 producers. The HI2 (67%) and L/M (21%) replicons were associated with blaIMP-4. All HI2 plasmids were of sequence type 1 (ST1). All but one of the NDM producers possessed blaCTX-M-15. The 16S rRNA methylase genes found among NDM producers were armA, rmtB, rmtC, and rmtF. The substantial increase in the prevalence of CPE in Queensland has been associated mainly with the emergence E. cloacae strains possessing HI2 plasmids carrying blaIMP-4 over the past 2 years. The importation of NDM producers and/or OXA-48-like producers in patients also contributed to the increased emergence of CPE. PMID:25918153

  12. Monetary Shocks in Models with Inattentive Producers.

    Science.gov (United States)

    Alvarez, Fernando E; Lippi, Francesco; Paciello, Luigi

    2016-04-01

    We study models where prices respond slowly to shocks because firms are rationally inattentive. Producers must pay a cost to observe the determinants of the current profit maximizing price, and hence observe them infrequently. To generate large real effects of monetary shocks in such a model the time between observations must be long and/or highly volatile. Previous work on rational inattentiveness has allowed for observation intervals that are either constant-but-long (e.g. Caballero, 1989 or Reis, 2006) or volatile-but-short (e.g. Reis's, 2006 example where observation costs are negligible), but not both. In these models, the real effects of monetary policy are small for realistic values of the duration between observations. We show that non-negligible observation costs produce both of these effects: intervals between observations are infrequent and volatile. This generates large real effects of monetary policy for realistic values of the average time between observations.

  13. Sounds energetic: the radio producer's energy minibook

    Energy Technology Data Exchange (ETDEWEB)

    1980-12-01

    The Minibook will be expanded into the final Radio Producer's Energy Sourcebook. Radio producers and broadcasters are asked to contribute ideas for presenting energy knowledge to the public and to be included in the Sourcebook. Chapter One presents a case study suggesting programming and promotion ideas and sample scripts for a radio campaign that revolves around no-cost or low-cost steps listeners can take to increase their home energy efficiency and save money. A variety of other energy topics and suggestions on ways to approach them are addressed in Chapter Two. Chapter Three contains energy directories for Baltimore, Philadelphia, Pittsburg, and Washington, DC. The directories will be expanded in the Sourcebook and will consist of a selection of local public and private sector energy-related organizations and list local experts and organizations and the best Federal, state, and local government programs that can provide consumers and citizens groups with information, technical assistance, and financial support. (MCW)

  14. Calcitonin produces hypercalcemia in leopard sharks.

    Science.gov (United States)

    Glowacki, J; O'Sullivan, J; Miller, M; Wilkie, D W; Deftos, L J

    1985-02-01

    Calcitonin was detected by RIA in sera from four marine species, leopard sharks (Triakis semifasciata), horn sharks (Heterodontus francisci), thornback rays (Platyrhinoides triseriata), and kelp bass (Paralabrax clathratus). These animals have levels of calcitonin and calcium higher than freshwater and terrestrial species have. The administration of salmon calcitonin to bass (4 micrograms/kg BW) produced hypocalcemia and hypophosphatemia as has been reported for other bony vertebrates. In marked contrast, calcitonin produced a prompt hypercalcemia in sharks; the average was 9.8% increase in serum calcium in nine animals with no attendant change in phosphorus. These findings demonstrate that calcitonin can increase serum calcium in sharks. Because shark skeleton is composed of cartilage, this hypercalcemic effect of calcitonin does not require a bony skeleton.

  15. Bacillus subtilis as potential producer for polyhydroxyalkanoates

    Directory of Open Access Journals (Sweden)

    Patel Sanjay KS

    2009-07-01

    Full Text Available Abstract Polyhydroxyalkanoates (PHAs are biodegradable polymers produced by microbes to overcome environmental stress. Commercial production of PHAs is limited by the high cost of production compared to conventional plastics. Another hindrance is the brittle nature and low strength of polyhydroxybutyrate (PHB, the most widely studied PHA. The needs are to produce PHAs, which have better elastomeric properties suitable for biomedical applications, preferably from inexpensive renewable sources to reduce cost. Certain unique properties of Bacillus subtilis such as lack of the toxic lipo-polysaccharides, expression of self-lysing genes on completion of PHA biosynthetic process – for easy and timely recovery, usage of biowastes as feed enable it to compete as potential candidate for commercial production of PHA.

  16. Characterization of briquettes produced with agroforestry residues

    Directory of Open Access Journals (Sweden)

    Ananias Francisco Dias Júnior

    2014-09-01

    Full Text Available The objective of the present was to characterize the quality of briquettes produced with fines of vegetable coal and bamboo residues, under different formulations. Specific gravity density, bulk density mass, moisture content and speed or rate of thermic degradation were evaluated. Compressive strength and rotation test were applied to the briquettes. Superior and inferior calorific values from briquettes were estimate by adjusted equations. Briquettes produced with the highest percentages of vegetable coal fines presented higher specific gravity, bulk density, ash content and fixed carbon. It also presented resistance to fall and abrasion. Briquettes with higher bamboo residues content presented faster degradation, higher compressive strength, beyond higher volatile matters and calorific value.

  17. Method for producing catalysis from coal

    Science.gov (United States)

    Farcasiu, Malvina; Derbyshire, Frank; Kaufman, Phillip B.; Jagtoyen, Marit

    1998-01-01

    A method for producing catalysts from coal is provided comprising mixing an aqueous alkali solution with the coal, heating the aqueous mixture to treat the coal, drying the now-heated aqueous mixture, reheating the mixture to form carbonized material, cooling the mixture, removing excess alkali from the carbonized material, and recovering the carbonized material, wherein the entire process is carried out in controlled atmospheres, and the carbonized material is a hydrocracking or hydrodehalogenation catalyst for liquid phase reactions. The invention also provides for a one-step method for producing catalysts from coal comprising mixing an aqueous alkali solution with the coal to create a mixture, heating the aqueous mixture from an ambient temperature to a predetermined temperature at a predetermined rate, cooling the mixture, and washing the mixture to remove excess alkali from the treated and carbonized material, wherein the entire process is carried out in a controlled atmosphere.

  18. Rhamnolipid Biosurfactants Produced by Pseudomonas Species

    Directory of Open Access Journals (Sweden)

    Banu Kaskatepe

    Full Text Available ABSTRACT: Surfactants are chemical products widely used in our daily life in toothpaste and other personal hygiene and cosmetic products, and in several industries. Biosurfactants are surfactants of biological origin that can be produced by microorganisms and have many advantages, such as low toxicity and high biodegradability, compared to synthetic counterparts. Unfortunately, high production costs limit the use of biosurfactants. Low-cost production is the most important factor for biosurfactants to be able to compete in the global market place. This review presents general information on rhamnolipid biosurfactant produced by Pseudomonas species, as well as on their production and applications. In addition, industrial products and their wastes used for rhamnolipid production are reviewed in detail based on recent studies.

  19. Genotoxicity of fumes from heated cooking oils produced in Taiwan.

    Science.gov (United States)

    Wu, P F; Chiang, T A; Ko, Y C; Lee, H

    1999-02-01

    Epidemiologic investigations of lung cancer among Taiwanese nonsmoking women have found that exposure to fumes from cooking oils may be an important risk factor. Fume samples from three different commercial cooking oils (lard, soybean, and peanut oils) often used in Taiwan for preparing Chinese meals were collected for genotoxicity analysis in SOS chromotest and sister chromatid exchange (SCE) assays. The induction factors of the SOS chromotest in Escherichia coli PQ 37 were dependent on the concentrations of lard and soybean cooking oil extracts without S9 mix. In addition, when CHO-K1 cells were exposed to condensates of cooking oil fumes for 12 h, SCEs showed a dose-related increase in extracts of lard and soybean oil fumes. This result provides experimental evidence and is in accordance with the findings of epidemiologic studies that women exposed to the emitted fumes of cooking oils are at an increase risk of contracting lung cancer. Copyright 1999 Academic Press.

  20. Microwave Semiconductor Equipment Produced in Poland,

    Science.gov (United States)

    1984-01-20

    lQal signal source in other devices. Microwave Transistors As a result of work in the field of microwave transistors , the technology for pnp ...is now commonly carried out on transistors and microwave subsystems. The results of the labors of the DM section connected with the new devices and...level of employment Illustration 2. Microwave diodes and semiconductor transistors presently produced in the ITE (DM section) The Construction and

  1. Cyanobacteria blooms produce teratogenic retinoic acids.

    Science.gov (United States)

    Wu, Xiaoqin; Jiang, Jieqiong; Wan, Yi; Giesy, John P; Hu, Jianying

    2012-06-12

    Deformed amphibians have been observed in eutrophic habitats, and some clues point to the retinoic acids (RAs) or RA mimics. However, RAs are generally thought of as vertebrate-specific hormones, and there was no evidence that RAs exist in cyanobacteria or algae blooms. By analyzing RAs and their analogs 4-oxo-RAs in natural cyanobacteria blooms and cultures of cyanobacteria and algae, we showed that cyanobacteria blooms could produce RAs, which were powerful animal teratogens. Intracellular RAs and 4-oxo-RAs with concentrations between 0.4 and 4.2 × 10(2) ng/L were detected in all bloom materials, and extracellular concentrations measured in water from Taihu Lake, China, were as great as 2.0 × 10 ng/L, which might pose a risk to wildlife through chronic exposure. Further examination of 39 cyanobacteria and algae species revealed that 32 species could produce RAs and 4-oxo-RAs (1.6-1.4 × 10(3) ng/g dry weight), and the dominant cyanobacteria species in Taihu Lake, Microcystis flos-aquae and Microcystis aeruginosa, produced high amounts of RAs and 4-oxo-RAs with concentrations of 1.4 × 10(3) and 3.7 × 10(2) ng/g dry weight, respectively. Most genera of cyanobacteria that could produce RAs and 4-oxo-RAs, such as Microcystis, Anabaena, and Aphanizomenon, often occur dominantly in blooms. Production of RAs and 4-oxo-RAs by cyanobacteria was associated with species, origin location, and growth stage. These results represent a conclusive demonstration of endogenous production of RAs in freshwater cyanobacteria blooms. The observation of teratogenic RAs in cyanobacteria is evolutionarily and ecologically significant because RAs are vertebrate-specific hormones, and cyanobacteria form extensive and highly visible blooms in many aquatic ecosystems.

  2. Pheromone produced by the myxobacterium Stigmatella aurantiaca.

    OpenAIRE

    Stephens, K.; Hegeman, G D; White, D

    1982-01-01

    An extracellular, diffusible signaling molecule (pheromone) was produced by Stigmatella aurantiaca during fruiting body formation. The pheromone decreased the aggregation period in both the light and the dark and substituted for light in stimulating the maturation of aggregates into fruiting bodies. The cells were more sensitive to lower concentrations of pheromone in the light than in the dark, possibly explaining the stimulation of aggregation and fruiting body formation by light. The phero...

  3. Interference to satellite systems produced by rainscatter

    Science.gov (United States)

    Howell, R. G.; Thompson, P. T.

    1991-10-01

    Data, obtained from eight small dish receivers, placed around the United Kingdom, and designed to detect the scattering by rain of signals from the British Telecom (BT) 11 GHz microwave network, is presented. Fifteen site years of measurements were analyzed to produce cumulative distributions of effective receive antenna noise temperature and, where rainscattered signals were detected, cumulative distributions of transmission loss. The results obtained are compared with those predicted by a BT/University of Essex rainscatter interference prediction model (SCIMP).

  4. Method of producing microchannel and nanochannel articles

    Science.gov (United States)

    D'Urso, Brian R.

    2010-05-04

    A method of making an article having channels therethrough includes the steps of: providing a ductile structure defining at least one macro-channel, the macro-channel containing a salt; drawing the ductile structure in the axial direction of the at least one macro-channel to reduce diameter of the macro-channel; and contacting the salt with a solvent to dissolve the salt to produce an article having at least one microchannel.

  5. Adventures in Laser Produced Plasma Research

    Energy Technology Data Exchange (ETDEWEB)

    Key, M

    2006-01-13

    In the UK the study of laser produced plasmas and their applications began in the universities and evolved to a current system where the research is mainly carried out at the Rutherford Appleton Laboratory Central Laser Facility ( CLF) which is provided to support the universities. My own research work has been closely tied to this evolution and in this review I describe the history with particular reference to my participation in it.

  6. Investigate Nasal Colonize Staphylococcus Species Biofilm Produced

    Directory of Open Access Journals (Sweden)

    Cemil Demir

    2014-03-01

    Full Text Available Aim: 127 S.aureus and 65 CoNS strains were isolated from patients noses%u2019. To produce a biofilm ability was investigated using three different methods. Slime-positive and negative staphylococcies%u2019 resistance were evaluated against different antibiotics. Material and Method: Swap samples puted 7% blood agar. Staphylococcus aureus and coagulase-negative staphylococci (CoNS isolates biofilm produced ability were investigated using Congo Red Agar (CRA, microplates (MP and Standard Tube (ST methods. In addition to that, presence of antibiotic resistance of the staphylococcal isolates are determined agar disc diffusion method. Results: The rate of biofilm producing Staphylococcus spp strains was found to be 72.4%, 67.7%, and 62.9%, respectively with CRA, MP, and ST tests. There was no significant relationship among the tests (p>0.05. In addition, antibiotic resistance of Staphylococcus spp. against various antibiotics was also determined by the agar disk diffusion method. Resistance rates of biofilm positive (BP Staphylococcus spp for penicilin G, ampicilin, amocycilin/clavulanic acid, tetracyclin, eritromycin, gentamycin, and enrofloxacin 71.7%, 69.7%, 6.2%, 20.7%, 21.4%, 1.4%, and 0.7%, respectively. Resistance rates of biofilm negative (BN spp for 42.6%, 23.4%, 4.3%, 14.9%, 19.1%, 0.0%, 0.0% respectively. All Staphylococcus isolates were found to be susceptible to vancomycin and teicaplonin. Although BP strains antibiotic resistance rates were observed higher than BN strains. But resistance rates were not found statistically significant (p>0.05. Discussion: CRA is the reliablity and specifity method to determine Staphylococcus spp. biofilm produce ability.

  7. Separation of a tungus producing taxol

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    An endogenous filariform fungus has been separated from a treenamed Taxus growing in the Aba region, Sichuan, China. The fungus is fermented in fluid medium for 3 weeks at 25℃, then the HPLC and MALDI-TOF analysis of the zymotic fluid show that the zymotic fluid contains taxol. So it is a fungus which can produce taxol. It is named Taxomyces sp. temporarily.

  8. KPC-producing Enterobacter aerogenes infection

    OpenAIRE

    Tuon, Felipe F.; Camila Scharf; Jaime L. Rocha; Juliette Cieslinsk; Guilherme Nardi Becker; Arend,Lavinia N.

    2015-01-01

    Background: Enterobacteris a common nosocomial microorganism and its carbapenem's resistance has increased. The management of these cases is unclear.Objective: We evaluated 16 patients with KPC-producing Enterobacter aerogenesinfections, detailing the site of infection, therapy, clinical and epidemiological data.Methods: A retrospective and descriptive study. Clinical data were revised and KPC-2 detection was by molecular methods. Risk factors associated with mortality were compared using app...

  9. Producing a solid fuel from agricultural wastes

    Energy Technology Data Exchange (ETDEWEB)

    Khigasikuni, T.; Fudziki, A.; Koisi, K.

    1982-08-21

    Agricultural wastes, in particular, the peels and seeds of mandarine oranges, used for canning, were ground, dried, mixed with a binder, molded in cylindrical or pyramidal forms of a piece of the desired size, heated and impregnated with a water repellant substance, for instance, paraffin. A material is produced with a d = 1. PVA was used as the binder. The wastes were partially gasified and the obtained gas was used as a heat source in drying the wastes.

  10. Structural properties of produced CuO/NiO/glass thin layers Produced by chemical method

    Directory of Open Access Journals (Sweden)

    A. Ramezani

    2016-12-01

    Full Text Available Nickel Oxide and Copper oxide on Nickel Oxide thin layers were produced by chemical bath deposition method. There nano structures were investigated by SEM and EDAX analysis. By producing CuO/NiO/glass sandwich layers nano structure of NiO/glass layer changed and fraction of voids decreases. In sandwich layer physical property of outer layer was dominant

  11. Consumer's Fresh Produce Food Safety Practices: Outcomes of a Fresh Produce Safety Education Program

    Science.gov (United States)

    Scott, Amanda R.; Pope, Paul E.; Thompson, Britta M.

    2009-01-01

    The Centers for Disease Control and Prevention estimate that there are 76 million cases of foodborne disease annually. Foodborne disease is usually associated with beef, poultry, and seafood. However, there is an increasing number of foodborne disease cases related to fresh produce. Consumers may not associate fresh produce with foodborne disease…

  12. Consumer's Fresh Produce Food Safety Practices: Outcomes of a Fresh Produce Safety Education Program

    Science.gov (United States)

    Scott, Amanda R.; Pope, Paul E.; Thompson, Britta M.

    2009-01-01

    The Centers for Disease Control and Prevention estimate that there are 76 million cases of foodborne disease annually. Foodborne disease is usually associated with beef, poultry, and seafood. However, there is an increasing number of foodborne disease cases related to fresh produce. Consumers may not associate fresh produce with foodborne disease…

  13. Pervaporation of ethanol produced from banana waste.

    Science.gov (United States)

    Bello, Roger Hoel; Linzmeyer, Poliana; Franco, Cláudia Maria Bueno; Souza, Ozair; Sellin, Noeli; Medeiros, Sandra Helena Westrupp; Marangoni, Cintia

    2014-08-01

    Banana waste has the potential to produce ethanol with a low-cost and sustainable production method. The present work seeks to evaluate the separation of ethanol produced from banana waste (rejected fruit) using pervaporation with different operating conditions. Tests were carried out with model solutions and broth with commercial hollow hydrophobic polydimethylsiloxane membranes. It was observed that pervaporation performance for ethanol/water binary mixtures was strongly dependent on the feed concentration and operating temperature with ethanol concentrations of 1-10%; that an increase of feed flow rate can enhance the permeation rate of ethanol with the water remaining at almost the same value; that water and ethanol fluxes was increased with the temperature increase; and that the higher effect in flux increase was observed when the vapor pressure in the permeate stream was close to the ethanol vapor pressure. Better results were obtained with fermentation broth than with model solutions, indicated by the permeance and membrane selectivity. This could be attributed to by-products present in the multicomponent mixtures, facilitating the ethanol permeability. By-products analyses show that the presence of lactic acid increased the hydrophilicity of the membrane. Based on this, we believe that pervaporation with hollow membrane of ethanol produced from banana waste is indeed a technology with the potential to be applied.

  14. Beneficial Reuse of San Ardo Produced Water

    Energy Technology Data Exchange (ETDEWEB)

    Robert A. Liske

    2003-09-26

    This report summarizes the work performed from 1 April 2003 to 30 September 2003 and recommends the tasks to be performed during Phase II (Pilot Evaluation). During this period discussions were held with various water agencies regarding use of the treated produced water either directly or indirectly through a water trading arrangement. In particular, several discussions were held with Monterey County Water Resources Agency, that has been charged with the long-term management and preservation of water resources in Monterey County. The Agency is very supportive of the program. However, they would like to see water quality/cost estimate data for the treated produced water from the pilot study prior to evaluating water use/water trade options. The agency sent a letter encouraging the project team to perform the pilot study to evaluate feasibility of the project. In addition, the regulations related to use of the treated water for various applications were updated during this period. Finally, the work plan, health and safety plan and sample analyses plan for performing pilot study to treat the oilfield produced water were developed during this period.

  15. Social inclusion policy: Producing justice or retribution?

    Directory of Open Access Journals (Sweden)

    Kym Macfarlane

    2010-10-01

    Full Text Available The notion of social inclusion has currently gained extraordinary credence in Australia. Policy incorporating social inclusion abounds across all discipline areas with the federal government for the first time instituting a government portfolio for this area, headed by the Deputy Prime Minister. Such a move indicates the importance of managing aspects of inclusion across all sectors, in a country where diversity abounds. However, this focus on inclusion can prove highly problematic, when it becomes such an integral part of policy formulation and of the assumptions, omissions and contradictions that policy produces. This paper examines how policy discourse produces ways of thinking about inclusion/exclusion. Using three vignettes, the author applies the theories of Michel Foucault to argue that the discursive production of such inclusive policy works to simultaneously exclude by categorising particular types of individuals and families as “proper” participants in society. The author contends that understandings of propriety relating to the inclusion/exclusion binary reinscribe each other, in ways that situate particular citizens outside of possibilities for “success” in social and systemic participation. Such understanding is highlighted by a conceptual examination of the ways in which discursively produced notions of propriety become normalised. Keywords: bricolage, discourse, authorised knowledge, imperative discourse, regimes of truth

  16. PIVKA-II-producing advanced gastric cancer.

    Science.gov (United States)

    Takano, Shigetsugu; Honda, Ichiro; Watanabe, Satoshi; Soda, Hiroaki; Nagata, Matsuo; Hoshino, Isamu; Takenouchi, Toshinao; Miyazaki, Masaru

    2004-08-01

    We describe the case of a 68-year-old man with primary advanced adenocarcinoma of the stomach, who displayed extremely high plasma levels of protein induced by vitamin K antagonist (PIVKA)-II (15 600 mAU/ml) and normal levels of alphafetoprotein (AFP) (4 ng/ml). Ultrasonography and dynamic computed tomography ruled out hepatocellular carcinoma (HCC) or liver metastasis. After preoperative chemotherapy, pancreatico-spleno total gastrectomy with D2 lymphadenectomy was performed. Postoperatively, plasma levels of PIVKA-II returned to within the normal range (29 mAU/ml). Microscopic examination revealed stomach adenocarcinoma showing various histological types, such as moderately to poorly differentiated mucinous adenocarcinoma, but hepatoid differentiation of gastric adenocarcinoma was not detected. Localization of PIVKA-II and AFP within tumor cells was demonstrated by immunohistochemical staining using monoclonal antibodies. These results indicate that tumor cells from gastric cancer may produce PIVKA-II. Some cases of PIVKA-II- and AFP-producing advanced gastric cancer with liver metastasis have been reported, but this is the first report of gastric cancer without liver metastasis producing PIVKA-II alone.

  17. Bioethanol produced from Moringa oleifera seeds husk

    Science.gov (United States)

    Ali, E. N.; Kemat, S. Z.

    2017-06-01

    This paper presents the potential of bioethanol production from Moringa oleifera seeds husk which contains lignocellulosic through Simultaneous Saccharification and Fermentation (SSF) process by using Saccharomyces cerevisiae. This paper investigates the parameters which produce optimum bioethanol yield. The husk was hydrolyzed using NaOH and fermented using Saccharomyces cerevisiae yeast. Batch fermentation was performed with different yeast dosage of 1, 3, and 5 g/L, pH value was 4.5, 5.0 and 5.5, and fermentation time of 3, 6, 9 and 12 hours. The temperature of fermentation process in incubator shaker is kept constant at 32ºC. The samples are then filtered using a 0.20 μm nylon filter syringe. The yield of bioethanol produced was analysed using High Performance Liquid Chromatography (HPLC). The results showed that the highest yield of 29.69 g/L was obtained at 3 hours of fermentation time at pH of 4.5 and using 1g/L yeast. This research work showed that Moringa oleifera seeds husk can be considered to produce bioethanol.

  18. Radioactivity monitoring of Irish dairy produce

    Energy Technology Data Exchange (ETDEWEB)

    Kelleher, K. (Radiological Protection Institute of Ireland. Radiation Monitoring, Dublin (Ireland))

    2010-03-15

    Full text: The RPII has been carrying out monitoring of milk and dairy produce since 1986. Milk samples are routinely analysed for radiocaesium and strontium-90 as part of the RPII's environmental monitoring programme to determine the doses received to the Irish population from milk consumption. The method the RPII utilises for determining the Sr-90 activity in milk is by measuring the Cerenkov radiation produced by its daughter 90Y isolated from interfering nuclides such as uranium, thorium, radium and their decay products as well as isotopes of caesium, potassium and strontium by extraction with 10% di-(2-ethylhexyl)phosphate (HDEHP) in toluene. The chemical yield of 90Y is determined by the acidmetric titration of yttrium nitrate carrier with titriplex III. The levels of Sr-90 and dose to the Irish population from milk consumption have been negligible when compared to other radioactive sources in the Irish environment. Other dairy products are analysed for radiocaesium on a routine basis for commercial customers to ensure the levels of radioactivity in the dairy products fall within EC regulations governing the export/import of dairy produce. The export of milk and milk produce from Ireland is a very important industry, 80% of dairy products produced in Ireland are exported and these exports are worth Euro 2.2 billion annually to the Irish economy. The dairy products are analysed by gamma spectroscopy and include full and skim milk powders, butter, casein, cheese, cream, whey and lactose. The levels of radiocaesium in these products are typically below 5 Bk/kg and fall well within the limit of 370 Bq/kg laid down by the European Community in Council Regulation 737/90. Although the levels of these radionuclides are relatively low the RPII recognises the importance of analysing these samples for radioactivity to inform the public, ensure consumer confidence and, more importantly, to maintain a level of expertise in the RPII in these analytical techniques so

  19. Treatment of Oil & Gas Produced Water.

    Energy Technology Data Exchange (ETDEWEB)

    Dwyer, Brian P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-02-01

    Production of oil and gas reserves in the New Mexico Four Corners Region results in large volumes of "produced water". The common method for handling the produced water from well production is re-injection in regulatory permitted salt water disposal wells. This is expensive (%7E $5/bbl.) and does not recycle water, an ever increasingly valuable commodity. Previously, Sandia National Laboratories and several NM small business tested pressure driven membrane-filtration techniques to remove the high TDS (total dissolved solids) from a Four Corners Coal Bed Methane produced water. Treatment effectiveness was less than optimal due to problems with pre-treatment. Inadequate pre-treatment allowed hydrocarbons, wax and biological growth to foul the membranes. Recently, an innovative pre-treatment scheme using ozone and hydrogen peroxide was pilot tested. Results showed complete removal of hydrocarbons and the majority of organic constituents from a gas well production water. ACKNOWLEDGEMENTS This report was made possible through funding from the New Mexico Small Business Administration (NMSBA) Program at Sandia National Laboratories. Special thanks to Juan Martinez and Genaro Montoya for guidance and support from project inception to completion. Also, special thanks to Frank McDonald, the small businesses team POC, for laying the ground work for the entire project; Teresa McCown, the gas well owner and very knowledgeable- fantastic site host; Lea and Tim Phillips for their tremendous knowledge and passion in the oil & gas industry.; and Frank Miller and Steve Addleman for providing a pilot scale version of their proprietary process to facilitate the pilot testing.

  20. Bupropion hydrochloride produces conditioned hyperactivity in rats.

    Science.gov (United States)

    Wilkinson, Jamie L; Bevins, Rick A

    2007-04-23

    Bupropion is marketed as an antidepressant, Wellbutrin and smoking cessation aid, Zyban. Although the therapeutic neurological mechanisms of bupropion have not been fully elucidated, bupropion shares some behavioral similarities with classic psychomotor stimulants. The present study sought to further investigate these psychomotor stimulant effects of bupropion by assessing whether repeated administration of bupropion in a distinct environment produced conditioned hyperactivity. Paired rats received 10 daily i.p. injections of bupropion (2.5-30 mg/kg) before placement in locomotor chambers for 30 min. Bupropion (10-30 mg/kg) produced acute locomotor hyperactivity compared to Unpaired controls. After repeated administration, there was no progressive increase or decrease in bupropion-induced activity. In a subsequent drug-free session conditioned hyperactivity was observed at 5-30 mg/kg doses. In a follow-up experiment, we examined whether responsiveness to novelty predicted the subsequent unconditioned and conditioned locomotor effect of bupropion. Reactivity to inescapable novelty, novel environment approach, and novel-object interaction were measured before locomotor conditioning with 30 mg/kg bupropion. We replicated the previous experiment, but scores on the novelty screens did not predict locomotor response to bupropion. This study extends the literature by demonstrating that environmental cues repeatedly paired with the stimulant effects of bupropion come to evoke elevated activity in the absence of drug (i.e., conditioned hyperactivity). This finding is consistent with the literature suggesting that bupropion shares many behavioral similarities with other psychomotor stimulants which also produce conditioned hyperactivity. However, a predictive relation between reactivity to forced novelty and the subsequent locomotor effect of bupropion may not be one of these similarities.

  1. Isolation of moulds capable of producing mycotoxins from blue mouldy Tulum cheeses produced in Turkey.

    Science.gov (United States)

    Erdogan, A; Gurses, M; Sert, S

    2003-08-15

    A total of 16 moulds was isolated and identified from 12 blue mouldy Tulum cheeses collected from retailers in Erzurum, Turkey; 12 were Penicillium roqueforti and 4 were Geotrichum candidum. The P. roqueforti isolates were grown in yeast sucrose broth at 5, 12 and 25 degrees C for 10 days, then extracted with chloroform and acetone and the extracts were examined for the presence of patulin, penicillic acid, roquefortine and PR toxin using thin layer chromatography. All of the P. roqueforti strains had toxin-producing ability at 5, 12 and 25 degrees C, eight produced only at 5 and 12 degrees C and six could not produce toxin at 5 degrees C.

  2. Pyrolysis process for producing fuel gas

    Science.gov (United States)

    Serio, Michael A. (Inventor); Kroo, Erik (Inventor); Wojtowicz, Marek A. (Inventor); Suuberg, Eric M. (Inventor)

    2007-01-01

    Solid waste resource recovery in space is effected by pyrolysis processing, to produce light gases as the main products (CH.sub.4, H.sub.2, CO.sub.2, CO, H.sub.2O, NH.sub.3) and a reactive carbon-rich char as the main byproduct. Significant amounts of liquid products are formed under less severe pyrolysis conditions, and are cracked almost completely to gases as the temperature is raised. A primary pyrolysis model for the composite mixture is based on an existing model for whole biomass materials, and an artificial neural network models the changes in gas composition with the severity of pyrolysis conditions.

  3. ECOLOGICAL REGIONALIZATION METHODS OF OIL PRODUCING AREAS

    Directory of Open Access Journals (Sweden)

    Inna Ivanovna Pivovarova

    2017-01-01

    Full Text Available The paper analyses territory zoning methods with varying degrees of anthropogenic pollution risk. The summarized results of spatial analysis of oil pollution of surface water in the most developed oil-producing region of Russia. An example of GIS-zoning according to the degree of environmental hazard is presented. All possible algorithms of cluster analysis are considered for isolation of homogeneous data structures. The conclusion is made on the benefits of using combined methods of analysis for assessing the homogeneity of specific environmental characteristics in selected territories.

  4. Silage produces biofuel for local consumption

    Science.gov (United States)

    2011-01-01

    Background In the normal process of bioethanol production, biomass is transported to integrated large factories for degradation to sugar, fermentation, and recovery of ethanol by distillation. Biomass nutrient loss occurs during preservation and degradation. Our aim was to develop a decentralized ethanol production system appropriate for farm or co-operative level production that uses a solid-state fermentation method for producing bio-ethanol from whole crops, provides cattle feed, and produces no wastes. The idea is to incorporate traditional silage methods with simultaneous saccharification and fermentation. Harvested, fresh biomass is ensiled with biomass-degrading enzymes and yeast. Multiple parallel reactions for biomass degradation and ethanol and lactic acid production are induced in solid culture in hermetically sealed containers at a ranch. After fermentation, ethanol is collected on site from the vapor from heated fermented products. Results The parallel reactions of simultaneous saccharification and fermentation were induced efficiently in the model fermentation system. In a laboratory-scale feasibility study of the process, 250 g of freshly harvested forage rice with 62% moisture was treated with 0.86 filter paper units/g dry matter (DM) of cellulase and 0.32 U/g DM of glucoamylase. After 20 days of incubation at 28°C, 6.4 wt.% of ethanol in fresh matter (equivalent to 169 g/kg DM) was produced. When the 46 wt.% moisture was gathered as vapor from the fermented product, 74% of the produced ethanol was collected. Organic cellular contents (such as the amylase and pronase degradable fractions) were decreased by 63% and organic cell wall (fiber) content by 7% compared to silage prepared from the same material. Conclusions We confirmed that efficient ethanol production is induced in nonsterilized whole rice plants in a laboratory-scale solid-state fermentation system. For practical use of the method, further study is needed to scale-up the fermentation

  5. Producing Knowledge to Reduce Rhetorical Distance

    DEFF Research Database (Denmark)

    Kampf, Constance

    Producing Knowledge to Reduce Rhetorical Distance: Extending Identity and Engaging Mainstream Ideology via the Web Constance Kampf, Department of Research Knowledge Communication, Aarhus School of Business, Denmark McLuhan describes technologies as extensions -the wheel being an extension...... writers a larger public forum into which they can extend their identity. When the identity being extended represents a minority group, the web offers an opportunity for members of that group to engage mainstream ideology and work at reducing the rhetorical distance between their identity and mainstream...... the opportunity for engaging mainstream ideologies in order to reduce the rhetorical distance between minority and majority cultures....

  6. Performance profiles of major energy producers 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-02-01

    Performance Profiles of Major Energy Producers 1994 is the eighteenth annual report of the Energy Information Administration`s (EIA) Financial Reporting System (FRS). The report examines financial and operating developments in energy markets, with particular reference to the 24 major U.S. energy companies required to report annually on Form EIA-28. Financial information is reported by major lines of business, including oil and gas production, petroleum refining and marketing, other energy operations, and nonenergy businesses. Financial and operating results are presented in the context of energy market developments with a view toward identifying changing corporate strategies and measuring the performance of ongoing operations both in the United States and abroad.

  7. High ethanol producing derivatives of Thermoanaerobacter ethanolicus

    Science.gov (United States)

    Ljungdahl, Lars G.; Carriera, Laura H.

    1983-01-01

    Derivatives of the newly discovered microorganism Thermoanaerobacter ethanolicus which under anaerobic and thermophilic conditions continuously ferment substrates such as starch, cellobiose, glucose, xylose and other sugars to produce recoverable amounts of ethanol solving the problem of fermentations yielding low concentrations of ethanol using the parent strain of the microorganism Thermoanaerobacter ethanolicus are disclosed. These new derivatives are ethanol tolerant up to 10% (v/v) ethanol during fermentation. The process includes the use of an aqueous fermentation medium, containing the substrate at a substrate concentration greater than 1% (w/v).

  8. Method for producing metal oxide nanoparticles

    Science.gov (United States)

    Phillips, Jonathan; Mendoza, Daniel; Chen, Chun-Ku

    2008-04-15

    Method for producing metal oxide nanoparticles. The method includes generating an aerosol of solid metallic microparticles, generating plasma with a plasma hot zone at a temperature sufficiently high to vaporize the microparticles into metal vapor, and directing the aerosol into the hot zone of the plasma. The microparticles vaporize in the hot zone into metal vapor. The metal vapor is directed away from the hot zone and into the cooler plasma afterglow where it oxidizes, cools and condenses to form solid metal oxide nanoparticles.

  9. Performance profiles of major energy producers 1989

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-23

    Performance Profiles of Major Energy Producers 1989 is the thirteenth annual report of the Energy Information Administration's (EIA) Financial Reporting System (FRS). The report examines financial and operating developments, with particular reference to the 23 major energy companies (the FRS companies'') required to report annually on Form EIA-28. Financial information is reported by major lines of business including oil and gas production, petroleum refining and marketing, and other energy operations. Domestic and international operations are examined separately in this report. It also traces key developments affecting the financial performance of major energy companies in 1989, as well as review of important trends.

  10. Ambiguity produces attention shifts in category learning.

    Science.gov (United States)

    Vadillo, Miguel A; Orgaz, Cristina; Luque, David; Nelson, James Byron

    2016-04-01

    It has been suggested that people and nonhuman animals protect their knowledge from interference by shifting attention toward the context when presented with information that contradicts their previous beliefs. Despite that suggestion, no studies have directly measured changes in attention while participants are exposed to an interference treatment. In the present experiments, we adapted a dot-probe task to track participants' attention to cues and contexts while they were completing a simple category learning task. The results support the hypothesis that interference produces a change in the allocation of attention to cues and contexts.

  11. Silage produces biofuel for local consumption

    Directory of Open Access Journals (Sweden)

    Kitamoto Hiroko K

    2011-11-01

    Full Text Available Abstract Background In the normal process of bioethanol production, biomass is transported to integrated large factories for degradation to sugar, fermentation, and recovery of ethanol by distillation. Biomass nutrient loss occurs during preservation and degradation. Our aim was to develop a decentralized ethanol production system appropriate for farm or co-operative level production that uses a solid-state fermentation method for producing bio-ethanol from whole crops, provides cattle feed, and produces no wastes. The idea is to incorporate traditional silage methods with simultaneous saccharification and fermentation. Harvested, fresh biomass is ensiled with biomass-degrading enzymes and yeast. Multiple parallel reactions for biomass degradation and ethanol and lactic acid production are induced in solid culture in hermetically sealed containers at a ranch. After fermentation, ethanol is collected on site from the vapor from heated fermented products. Results The parallel reactions of simultaneous saccharification and fermentation were induced efficiently in the model fermentation system. In a laboratory-scale feasibility study of the process, 250 g of freshly harvested forage rice with 62% moisture was treated with 0.86 filter paper units/g dry matter (DM of cellulase and 0.32 U/g DM of glucoamylase. After 20 days of incubation at 28°C, 6.4 wt.% of ethanol in fresh matter (equivalent to 169 g/kg DM was produced. When the 46 wt.% moisture was gathered as vapor from the fermented product, 74% of the produced ethanol was collected. Organic cellular contents (such as the amylase and pronase degradable fractions were decreased by 63% and organic cell wall (fiber content by 7% compared to silage prepared from the same material. Conclusions We confirmed that efficient ethanol production is induced in nonsterilized whole rice plants in a laboratory-scale solid-state fermentation system. For practical use of the method, further study is needed to

  12. Cells and methods for producing fatty alcohols

    Science.gov (United States)

    Pfleger, Brian F.; Youngquist, Tyler J.

    2017-07-18

    Recombinant cells and methods for improved yield of fatty alcohols. The recombinant cells harbor a recombinant thioesterase gene, a recombinant acyl-CoA synthetase gene, and a recombinant acyl-CoA reductase gene. In addition, a gene product from one or more of an acyl-CoA dehydrogenase gene, an enoyl-CoA hydratase gene, a 3-hydroxyacyl-CoA dehydrogenase gene, and a 3-ketoacyl-CoA thiolase gene in the recombinant cells is functionally deleted. Culturing the recombinant cells produces fatty alcohols at high yields.

  13. METHOD AND APPARATUS FOR PRODUCING POWER

    Science.gov (United States)

    Wollan, E.O.

    1961-06-27

    A neutronic reactor comprising two discrete zones; namely, an inner zone containing fissionable material and an outer zone containing fertile material is described. The inner zone is operated at a low temperature and is cooled by pressurized water. The outer zone is operated at a substantially higher temperature and is cooled by steam flashed from the inner zone. The reactor is particularly advantageous in that it produces high temperature steam; yet the materials of construction in the core (inner zone) are not restricted to materials capable of withstanding high temperature operation.

  14. Performance profiles of major energy producers 1989

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-23

    Performance Profiles of Major Energy Producers 1989 is the thirteenth annual report of the Energy Information Administration's (EIA) Financial Reporting System (FRS). The report examines financial and operating developments, with particular reference to the 23 major energy companies (the FRS companies'') required to report annually on Form EIA-28. Financial information is reported by major lines of business including oil and gas production, petroleum refining and marketing, and other energy operations. Domestic and international operations are examined separately in this report. It also traces key developments affecting the financial performance of major energy companies in 1989, as well as review of important trends.

  15. Cardiogenic embolism producing crescendo transient ischemic attacks.

    Science.gov (United States)

    Geraghty, Patrick J; Oak, Jack; Choi, Eric T

    2005-09-01

    Lateralizing, repetitive transient ischemic attacks are characteristic of symptomatic carotid bifurcation atherosclerotic plaques. We report a case in which a cardiogenic embolus, after lodging at the left carotid bifurcation, produced crescendo episodes of expressive aphasia and mild right upper extremity weakness. Complete neurological recovery was achieved following emergent carotid embolectomy and endarterectomy. This case demonstrates that the laminar nature of internal carotid blood flow may result in the localization of embolic events to a single region of the cerebral vasculature, regardless of the source lesion in the carotid artery. The role of endoluminal techniques in the diagnosis and management of such lesions is discussed.

  16. Simon Fraser University Computer Produced Map Catalogue

    Directory of Open Access Journals (Sweden)

    Brian Phillips

    2013-05-01

    Full Text Available An IBM 360/50 computer and magnetic tape are used in a new univer- sity library to produce a map catalogue by area and up to six subiects for each map. Cataloguing is by non-professional staff using the Library of Congress "G, schedule. Author, title, and publisher are in variable length fields, and codes are seldom used for input or interpretation. Ma- chine searches by area, subjects, author, publisher, scale, pro-;ection, date and language can be carried out.

  17. Method for producing thin film electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Narayanan, Manoj; Ma, Beihai; Balachandran, Uthamalingam; Dorris, Stephen

    2016-06-07

    The invention provides for A method for producing pure phase strontium ruthenium oxide films, the method comprising solubilizing ruthenium-containing and strontium-containing compounds to create a mixture; subjecting the mixture to a first temperature above that necessary for forming RuO.sub.2 while simultaneously preventing formation of RuO.sub.2; maintaining the first temperature for a time to remove organic compounds from the mixture, thereby forming a substantially dry film; and subjecting the film to a second temperature for time sufficient to crystallize the film. Also provided is pure phase material comprising strontium ruthenium oxide wherein the material contains no RuO.sub.2.

  18. Method of producing particulate-reinforced composites and composties produced thereby

    Science.gov (United States)

    Han, Qingyou; Liu, Zhiwei

    2013-12-24

    A process for producing particle-reinforced composite materials through utilization of an in situ reaction to produce a uniform dispersion of a fine particulate reinforcement phase. The process includes forming a melt of a first material, and then introducing particles of a second material into the melt and subjecting the melt to high-intenisty acoustic vibration. A chemical reaction initiates between the first and second materials to produce reaction products in the melt. The reaciton products comprise a solide particulate phase, and the high-intensity acoustic vibration fragments and/or separates the reaction products into solid particles that are dispersed in the melt and are smaller than the particles of the second material. Also encompassed are particles-reinforced composite materials produced by such a process.

  19. Method of producing particulate-reinforced composites and composites produced thereby

    Energy Technology Data Exchange (ETDEWEB)

    Han, Qingyou; Liu, Zhiwei

    2015-12-29

    A process for producing particle-reinforced composite materials through utilization of an in situ reaction to produce a uniform dispersion of a fine particulate reinforcement phase. The process includes forming a melt of a first material, and then introducing particles of a second material into the melt and subjecting the melt to high-intensity acoustic vibration. A chemical reaction initiates between the first and second materials to produce reaction products in the melt. The reaction products comprise a solid particulate phase, and the high-intensity acoustic vibration fragments and/or separates the reaction products into solid particles that are dispersed in the melt and are smaller than the particles of the second material. Also encompassed are particle-reinforced composite materials produced by such a process.

  20. CCT`s in a deregulated environment: A producer`s perspective

    Energy Technology Data Exchange (ETDEWEB)

    Edmonds, R.F. Jr.; Fayssoux, J.O. [Duke Power Co., Charlotte, NC (United States)

    1997-12-31

    The US electric industry will be deregulated (or substantially re-regulated) within 5 years. Several states, including California, Rhode Island, and New Hampshire, already have passed legislation to introduce competition into the electric markets before the year 2000. As this trend sweeps across the country, the resulting competitive market for generation will reward the lowest cost producers and force high cost producers out of the market. As a result, at least in the short run, it may be very difficult for new power plants employing Clean Coal Technologies (CCTs) to compete. This paper discusses a producer`s perspective of the new competitive market, and suggests several short and long term strategies and niches for CCTs.

  1. Method of producing particulate-reinforced composites and composites produced thereby

    Science.gov (United States)

    Han, Qingyou; Liu, Zhiwei

    2013-12-24

    A process for producing particle-reinforced composite materials through utilization of an in situ reaction to produce a uniform dispersion of a fine particulate reinforcement phase. The process includes forming a melt of a first material, and then introducing particles of a second material into the melt and subjecting the melt to high-intensity acoustic vibration. A chemical reaction initiates between the first and second materials to produce reaction products in the melt. The reaction products comprise a solid particulate phase, and the high-intensity acoustic vibration fragments and/or separates the reaction products into solid particles that are dispersed in the melt and are smaller than the particles of the second material. Also encompassed are particle-reinforced composite materials produced by such a process.

  2. Water produced with coal-bed methane

    Science.gov (United States)

    ,

    2000-01-01

    Natural gas produced from coal beds (coal-bed methane, CBM) accounts for about 7.5 percent of the total natural gas production in the United States. Along with this gas, water is also brought to the surface. The amount of water produced from most CBM wells is relatively high compared to conventional natural gas wells because coal beds contain many fractures and pores that can contain and transmit large volumes of water. In some areas, coal beds may function as regional or local aquifers and important sources for ground water. The water in coal beds contributes to pressure in the reservoir that keeps methane gas adsorbed to the surface of the coal. This water must be removed by pumping in order to lower the pressure in the reservoir and stimulate desorption of methane from the coal (fi g. 1). Over time, volumes of pumped water typically decrease and the production of gas increases as coal beds near the well bore are dewatered.

  3. Sustainable bioreactor systems for producing hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Zaborsky, O.R.; Radway, J.C.; Yoza, B.A. [Univ. of Hawaii, Honolulu, HI (United States); Benemann, J.R. [Univ. of California, Berkeley, CA (United States). Dept. of Plant and Molecular Biology; Tredici, M.R. [Univ. of Florence (Italy). Dipt. di Scienze e Tecnologie Alimentari e Microbiogiche

    1998-08-01

    The overall goal of Hawaii`s BioHydrogen Program is to generate hydrogen from water using solar energy and microalgae under sustainable conditions. Specific bioprocess engineering objectives include the design, construction, testing and validation of a sustainable photobioreactor system. Specific objectives relating to biology include investigating and optimizing key physiological parameters of cyanobacteria of the genus Arthrospira (Spirulina), the organism selected for initial process development. Another objective is to disseminate the Mitsui-Miami cyanobacteria cultures, now part of the Hawaii Culture Collection (HCC), to other research groups. The approach is to use a single organisms for producing hydrogen gas from water. Key stages are the growth of the biomass, the dark induction of hydrogenase, and the subsequent generation of hydrogen in the light. The biomass production stage involves producing dense cultures of filamentous, non-heterocystous cyanobacteria and optimizing biomass productivity in innovative tubular photobioreactors. The hydrogen generation stages entail inducing the enzymes and metabolic pathways that enable both dark and light-driven hydrogen production. The focus of Year 1 has been on the construction and operation of the outdoor photobioreactor for the production of high-density mass cultures of Arthrospira. The strains in the Mitsui-Miami collection have been organized and distributed to other researchers who are beginning to report interesting results. The project is part of the International Energy Agency`s biohydrogen program.

  4. Are Ti44-Producing Supernovae Exceptional?

    CERN Document Server

    The, L S; Diehl, R; Hartmann, D H; Iyudin, A F; Leising, M D; Meyer, B S; Motizuki, Y; Schönfelder, V

    2006-01-01

    According to standard models supernovae produce radioactive $^{44}$Ti, which should be visible in gamma-rays following decay to $^{44}$Ca for a few centuries. $^{44}Ti production is believed to be the source of cosmic $^{44}$Ca, whose abundance is well established. Yet, gamma-ray telescopes have not seen the expected young remnants of core collapse events. The $^{44}$Ti mean life of $\\tau \\simeq$ 89 y and the Galactic supernova rate of $\\simeq$ 3/100 y imply $\\simeq$ several detectable $^{44}Ti gamma-ray sources, but only one is clearly seen, the 340-year-old Cas A SNR. Furthermore, supernovae which produce much $^{44}Ti are expected to occur primarily in the inner part of the Galaxy, where young massive stars are most abundant. Because the Galaxy is transparent to gamma-rays, this should be the dominant location of expected gamma-ray sources. Yet the Cas A SNR as the only one source is located far from the inner Galaxy (at longitude 112 degree). We evaluate the surprising absence of detectable supernovae fro...

  5. Intense ultraviolet perturbations on aquatic primary producers

    CERN Document Server

    Guimarais, Mayrene; Horvath, Jorge

    2010-01-01

    During the last decade, the hypothesis that one or more biodiversity drops in the Phanerozoic eon, evident in the geological record, might have been caused by the most powerful kind of stellar explosion so far known (Gamma Ray Bursts) has been discussed in several works. These stellar explosions could have left an imprint in the biological evolution on Earth and in other habitable planets. In this work we calculate the short-term lethality that a GRB would produce in the aquatic primary producers on Earth. This effect on life appears as a result of ultraviolet (UV) re-transmission in the atmosphere of a fraction of the gamma energy, resulting in an intense UV flash capable of penetrating ~ tens of meters in the water column in the ocean. We focus on the action of the UV flash on phytoplankton, as they are the main contributors to global aquatic primary productivity. Our results suggest that the UV flash could cause an hemispheric reduction of phytoplankton biomass in the upper mixed layer of the World Ocean o...

  6. Study on Producing Heavy Paving Asphalt

    Institute of Scientific and Technical Information of China (English)

    Liu Daosheng; Gao Zhirong; Huo Kaifu; Liao Kejian

    2002-01-01

    The highly viscous crude oil from Shuguang No. 1 zone of Liaohe oilfield features high density,high viscosity and low wax content. It contains no gasoline fraction and its diesel oil fraction yield is only 7.19%, which belongs to the low sulfur naphthenic stocks crude oil. Its heavy fraction is not suited for producing lubricating oil. Its heavy oil, which contains more resins and asphaltenes and less wax, is not an ideal feedstock for catalytic cracking, but is the ideal raw material for producing high-grade paving asphalt.Now this highly viscous crude oil is used as fuel oil after being emulsified in Liaohe oilfield, but its viscosity is so high that it cannot be atomized uniformly and burned completely, resulting not only in waste of oil resource but also in reduction of economical benefit. To make full use of this oil resource and alleviate the shortfall of high grade paving asphalt in China, various brands of asphalt meeting Q/SHR003-1998and ESSO specifications were developed by blending vacuum residue of the said oil and a blending component which are rich in aromatics and deficient in wax. The impact of blending component on properties of blended asphalt has been investigated and road performances of these blended asphalts were studied. The laboratory test results show that the blended asphalts have good road performance and antiaging property.

  7. Janus microgels produced from functional precursor polymers.

    Science.gov (United States)

    Seiffert, Sebastian; Romanowsky, Mark B; Weitz, David A

    2010-09-21

    Micrometer-sized Janus particles of many kinds can be formed using droplet microfluidics, but in existing methods, the microfluidic templating is strongly coupled to the material synthesis, since droplet solidification occurs through rapid polymerization right after droplet formation. This circumstance limits independent control of the material properties and the morphology of the resultant particles. In this paper, we demonstrate a microfluidic technique to produce functional Janus microgels from prefabricated, cross-linkable precursor polymers. This approach separates the polymer synthesis from the particle gelation, thus allowing the microfluidic droplet templating and the functionalization of the matrix polymer to be performed and controlled in two independent steps. We use microfluidic devices to emulsify semidilute solutions of cross-linkable, chemically modified or unmodified poly(N-isopropylacrylamide) precursors and solidify the drops via polymer-analogous gelation. The resultant microgel particles exhibit two distinguishable halves which contain most of the modified precursors, and the unmodified matrix polymer separates these materials. The spatial distribution of the modified precursors across the particles can be controlled by the flow rates during the microfluidic experiments. We also form hollow microcapsules with two different sides (Janus shells) using double emulsion droplets as templates, and we produce Janus microgels that are loaded with a ferromagnetic additive which allows remote actuation of the microgels.

  8. Very Big Accelerators as Energy Producers

    CERN Document Server

    Wilson, R R

    2010-01-01

    One consequence of the application of superconductivity to accelerator construction is that the power consumption of accelerators will become much smaller. This raises the old possibility of using high energy protons to make neutrons which are then absorbed by fertile uranium or thorium to make a fissionable material like plutonium that can be burned in a nuclear reactor. The Energy Doubler/Saver being constructed at Fermilab is to be a superconducting accelerator that will produce 1000 GeV protons. The expected intensity of about $10^{12}$ protons per second corresponds to a beam power of about 0.2 MW. The total power requirements of the Doubler will be about 20 MW of which the injector complex will use approximately 13 MW, and the refrigeration of the superconducting magnets will use about 7 MW. Thus the beam power as projected is only a few orders of magnitude less than the accelerator power. But each 1000 GeV proton will produce about 60,000 neutrons in each nuclear cascade shower that is releaseq in a bl...

  9. CERN to start producing medical isotopes

    CERN Multimedia

    Anaïs Schaeffer

    2012-01-01

    A promising project that was hailed at the ICTR-PHE 2012 medical conference (see Bulletin issues 10-11/2012 and 12-13/2012) has seen the light of day at CERN. The project, known by the name of MEDICIS, will make it possible to produce a large variety of radioactive isotopes for medical research.   This image of a brain, superimposed on a drawing by Leonardo da Vinci, was taken by a PET scanner after injecting a molecule containing a positron-emitting isotope. CERN-MEDICIS will produce new isotopes for imaging which will be able to show up cancerous tissues and destroy them by emitting local radiation as the isotopes decay. In the United States, a new radium-based drug which targets bone metastases is about to go on the market. Radium, which can be brought to bear at the cell level, is a potent weapon in the fight against certain types of cancer, and is opening the way to a new form of medicine. This is the direction that CERN has decided to follow through the CERN-MEDICIS* (Medical Isotopes...

  10. Oilsands south : Cold Lake producers expanding operations

    Energy Technology Data Exchange (ETDEWEB)

    Jaremko, D.

    2005-09-01

    New construction and expansion activities at Cold Lake, Alberta were reviewed. Devon Canada, Canadian Natural Resources Ltd., Imperial Oil Ltd., EnCana, BlackRock Ventures Inc., and Husky Energy all have interests in the area, as well as plans to take production to new levels in the coming years. Devon has recently announced its purchase of $200 million worth of properties in the area from ExxonMobil Canada. Devon plans to drill 800 wells at Iron River over the next 4 years. Companies have been drilling in the areas since the 1960s, which has made current exploitation projects easier. Iron River currently produces 3000 barrels of oil per day, and production is expected to increase to 25,000 barrels per day by 2010. Over the last 20 years, Imperial Oil has completed 13 phases of commercial development at Cold Lake, with production that now averages 125,000 barrels per day. There are more than 3800 wells on-site that are directionally drilled off pads. In addition Imperial Oil has recently received regulatory approval to go ahead with expansion phases 14 to 16. The Nabiye Project is expected to add 250 million barrels of recoverable reserves. Cyclic Steam Stimulation (CSS) is used in the projects, a process which involves the steaming of reservoirs until they fracture. At Wolf Lake central facility, CNRL currently produces 50,000 barrels of bitumen per day from CSS and Steam Assisted Gravity Drainage (SAGD) operations. Details of their Primrose North facility expansion were presented, with production expected to be above 100,000 barrels per day over the next 25 years. Details of EnCana's Foster Creek projects and expansion schedules were also presented. New SAGD projects are planned by Husky Energy at their Tucker thermal project, and regulatory approval has been given for BlackRock Ventures to operate an SAGD pilot adjacent to Imperial Oil's facility. To date, the pilot plant has produced 1.2 million barrels of oil and project start-up is expected in 2007

  11. Biochar characteristics produced from malt spent rootlets

    Science.gov (United States)

    Fotopoulou, Kalliopi N.; Karapanagioti, Hrissi K.; Manariotis, Ioannis D.

    2013-04-01

    Biochar is a carbon-rich material produced by heating biomass in an oxygen-limited environment. Biochar is mainly used as an additive to soils to sequester carbon and improve soil fertility as well as a sorbent for environmental remediation processes. Surface properties such as point of zero charge, surface area and pore volume, surface topography, surface functional groups and acid-base behavior are important factors, which affect sorption efficiency. Understanding the surface alteration of biochars increases our understanding of the pollutant-sorbent interaction. Malt spent rootlets (MSR) is a by-product formed during beer production, is inexpensive and is produced in high quantities. The objective of the present study was to characterize the surface properties of biochar produced from MSR, and to investigate the effect of thermal treatment conditions on key characteristics that affect sorptive properties. The surface area, the pore volume, and the average pore size of the biochars were determined using gas (N2) adsorption-desorption cycles using the Brunauer, Emmett, and Teller (BET) equation. Isotherms with 30 adsorption and 20 desorption points were conducted at liquid nitrogen temperature (77K). Open surface area and micropore volume were determined using t-plot method and Harkins & Jura equation. Total organic carbon was also determined because it is an important factor that affects sorption. Raw MSR demonstrates low surface area that increases by 1 order of magnitude by thermal treatment up to 750oC. At temperatures from 750 up to 900oC, pyrolysis results to biochars with surface areas 210-340 m2/g. For the same temperature range, a high percentage (46-73%) of the pore volume of the biochars is due to micropores. Similar results were observed for all the grain size fractions of the raw MSR. The up-scaling of the biochar production was easily performed by using increased biomass analogous to the bigger vessels used each time. Positive results were obtained

  12. Method for producing nano-embedded microparticles

    DEFF Research Database (Denmark)

    2015-01-01

    (EN)The present invention relates to a rapid, high-throughput and continuous method for producing nano-embedded microparticles in powder form, thereby providing a cost- effective process which can be performed aseptically. The invention further relates to an apparatus for performing the method...... of the invention. (FR)La présente invention concerne un procédé rapide, à haut rendement et continu de production de nano-microparticules intégrées sous forme de poudre, ce qui permet d'obtenir un procédé économique qui peut être mis en oeuvre de manière aseptique. L'invention concerne, en outre, un appareil pour...

  13. Method for producing size selected particles

    Energy Technology Data Exchange (ETDEWEB)

    Krumdick, Gregory K.; Shin, Young Ho; Takeya, Kaname

    2016-09-20

    The invention provides a system for preparing specific sized particles, the system comprising a continuous stir tank reactor adapted to receive reactants; a centrifugal dispenser positioned downstream from the reactor and in fluid communication with the reactor; a particle separator positioned downstream of the dispenser; and a solution stream return conduit positioned between the separator and the reactor. Also provided is a method for preparing specific sized particles, the method comprising introducing reagent into a continuous stir reaction tank and allowing the reagents to react to produce product liquor containing particles; contacting the liquor particles with a centrifugal force for a time sufficient to generate particles of a predetermined size and morphology; and returning unused reagents and particles of a non-predetermined size to the tank.

  14. Producing scientific knowledge in Africa today

    DEFF Research Database (Denmark)

    2015-01-01

    This chapter analyses a life-history interview with an African climate change researcher, Mbow, to explore the conditions for scientific knowledge production in Africa. Mbow’s history points to three important and intertwined issues that played out differently through the different phases of his...... life: an inherited or colonial curriculum; universality of knowledge, namely the transfer of methods and theories from the Global North; and the cultural production of African researchers. The chapter shows how the post-colonial school system in Senegal was modelled over the French system and thus how...... difficult it was for Mbow to become independent of the colonial heritage. Through a capacity building programme, Mbow gained the competences necessary to question the transfer of theories and methods from the Global North and become an African emancipated researcher producing knowledge of relevance...

  15. Performance profiles of major energy producers 1993

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    Performance Profiles of Major Energy Producers 1993 is the seventeenth annual report of the Energy Information Administration`s (EIA) Financial Reporting System (FRS). The report examines financial and operating developments in energy markets, with particular reference to the 25 major US energy companies required to report annually on Form EIA-28. Financial information is reported by major liens of business, including oil and gas production, petroleum refining and marketing, other energy operations, and nonenergy businesses. Financial and operating results are presented in the context of energy market developments with a view toward identifying changing corporate strategies and measuring the performance of ongoing operations both in the US and abroad. This year`s report analyzes financial and operating developments for 1993 (Part 1: Developments in 1993) and also reviews key developments during the 20 years following the Arab Oil Embargo of 1973--1974 (Part 2: Major Energy Company Strategies Since the Arab Oil Embargo). 49 figs., 104 tabs.

  16. Method for Producing Substrates for Superconducting Layers

    DEFF Research Database (Denmark)

    2015-01-01

    There is provided a method for producing a substrate suitable for supporting an elongated superconducting element, wherein one or more elongated strips of masking material are placed on a solid element (202) so as to form one or more exposed elongated areas being delimited on one or two sides...... by elongated strip of masking material, and placing filling material on the solid element so that each exposed elongated area within the one or more exposed elongated areas is covered by a portion of filling material (318a-c) where each portion of filling material also covers at least a portion of the adjacent...... the portion of filling material and the solid element. The method may further comprise placing buffer material (640) and or superconducting material (642, 644, 646)) on the substrate, so as to provide a superconducting structure (601) with reduced AC losses....

  17. Method for producing substrates for superconducting layers

    DEFF Research Database (Denmark)

    2013-01-01

    There is provided a method for producing a substrate (600) suitable for supporting an elongated superconducting element, wherein, e.g., a deformation process is utilized in order to form disruptive strips in a layered solid element, and where etching is used to form undercut volumes (330, 332......) between an upper layer (316) and a lower layer (303) of the layered solid element. Such relatively simple steps enable providing a substrate which may be turned into a superconducting structure, such as a superconducting tape, having reduced AC losses, since the undercut volumes (330, 332) may be useful...... for separating layers of material. In a further embodiment, there is placed a superconducting layer on top of the upper layer (316) and/or lower layer (303), so as to provide a superconducting structure with reduced AC losses....

  18. Performance profiles of major energy producers 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    This publication examines developments in the operations of the major US e energy-producing companies on a corporate level, by major line of business, by major function within each line of business, and by geographic area. In 1996, 24 companies filed Form EIA-28. The analysis and data presented in this report represents the operations of the Financial Reporting System companies in the context of their worldwide operations and in the context of the major energy markets which they serve. Both energy and nonenergy developments of these companies are analyzed. Although the focus is on developments in 1996, important trends prior to that time are also featured. Sections address energy markets in 1996; key financial developments; oil and gas exploration, development, and production; downstream petroleum in 1996; coal and alternative energy; and foreign direct investment in US energy. 30 figs., 104 tabs.

  19. Advanced systems for producing superclean coal

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, R.H.; Luttrell, G.H.; Adel, G.T.

    1990-08-01

    The purpose of this project was to develop several advanced separation processes for producing superclean coal containing 0.4--2.0% ash and very little pyritic sulfur. Three physical and physico-chemical processes were studied: microbubble flotation, selective hydrophobic coagulation, and electrochemical coal cleaning. Information has been collected from bench-scale experiments in order to determine the basic mechanisms of all three processes. Additionally, because microbubble flotation has already been proven on a bench scale, preliminary scale-up models have been developed for this process. A fundamental study of the electrochemistry of coal pyrite has also been conducted in conjunction with this scale-up effort in order to provide information useful for improving sulfur rejection. The effects of additives (NaCl and kerosene) were also investigated. 94 refs., 167 figs., 25 tabs.

  20. Chitin is endogenously produced in vertebrates.

    Science.gov (United States)

    Tang, W Joyce; Fernandez, Javier G; Sohn, Joel J; Amemiya, Chris T

    2015-03-30

    Chitin, a biopolymer of N-acetylglucosamine, is abundant in invertebrates and fungi and is an important structural molecule [1, 2]. There has been a longstanding belief that vertebrates do not produce chitin; however, we have obtained compelling evidence to the contrary. Chitin synthase genes are present in numerous fishes and amphibians, and chitin is localized in situ to the lumen of the developing zebrafish gut, in epithelial cells of fish scales, and in at least three different cell types in larval salamander appendages. Chitin synthase gene knockdowns and various histochemical experiments in zebrafish further authenticated our results. Finally, a polysaccharide was extracted from scales of salmon that exhibited all the chemical hallmarks of chitin. Our data and analyses demonstrate the existence of endogenous chitin in vertebrates and suggest that it serves multiple roles in vertebrate biology.

  1. Method for producing size selected particles

    Science.gov (United States)

    Krumdick, Gregory K.; Shin, Young Ho; Takeya, Kaname

    2016-09-20

    The invention provides a system for preparing specific sized particles, the system comprising a continuous stir tank reactor adapted to receive reactants; a centrifugal dispenser positioned downstream from the reactor and in fluid communication with the reactor; a particle separator positioned downstream of the dispenser; and a solution stream return conduit positioned between the separator and the reactor. Also provided is a method for preparing specific sized particles, the method comprising introducing reagent into a continuous stir reaction tank and allowing the reagents to react to produce product liquor containing particles; contacting the liquor particles with a centrifugal force for a time sufficient to generate particles of a predetermined size and morphology; and returning unused reagents and particles of a non-predetermined size to the tank.

  2. Performance profiles of major energy producers 1992

    Energy Technology Data Exchange (ETDEWEB)

    1994-01-13

    Performance Profiles of Major Energy Producers 1992 is the sixteenth annual report of the Energy Information Administration`s (EIA) Financial Reporting System (FRS). The report examines financial and operating developments, with particular reference to the 25 major energy companies (the FRS companies) required to report annually on Form EIA-28. Financial information is reported by major lines of business, including oil and gas production, petroleum refining and marketing, and other energy operations. Domestic and international operations are examined separately in this report. The data are presented in the context of key energy market developments with a view toward identifying changing strategies of corporate development and measuring the apparent success of current ongoing operations.

  3. Improving cancer treatment with cyclotron produced radionuclides

    Energy Technology Data Exchange (ETDEWEB)

    Larson, S.M. Finn, R.D.

    1992-08-04

    This report describes the author's continuing long term goal of promoting nuclear medicine applications by improving the scientific basis for tumor diagnosis treatment and treatment follow-up based on the use of cyclotron produced radiotracers in oncology. The program has 3 interactive components: Radiochemistry /Cyclotron; Pharmacology; and Immunology. An essential strategy is as follows: novel radionuclides and radiotracers developed in the Radiochemistry/Cyclotron section under the DOE grant during the 1989--1992 grant period, will be employed in the Pharmacology and Immunology sections of the DOE grant during the 1992--1995 grant period. The development of novel radionuclides and tracers is of course useful in and of itself, but their utility is greatly enhanced by the interaction with the immunology and pharmacology components of the program.

  4. [Bacteriocins produced by lactic acid bacteria].

    Science.gov (United States)

    Bilková, Andrea; Sepova, Hana Kinová; Bilka, Frantisek; Balázová, Andrea

    2011-04-01

    Lactic acid bacteria comprise several genera of gram-positive bacteria that are known for the production of structurally different antimicrobial substances. Among them, bacteriocins are nowadays in the centre of scientific interest. Bacteriocins, proteinaceous antimicrobial substances, are produced ribosomally and have usually a narrow spectrum of bacterial growth inhibition. According to their structure and the target of their activity, they are divided into four classes, although there are some suggestions for a renewed classification. The most interesting and usable class are lantibiotics. They comprise the most widely commercially used and well examined bacteriocin, nisin. The non-pathogenic character of lactic acid bacteria is advantageous for using their bacteriocins in food preservation as well as in feed supplements or in veterinary medicine.

  5. Optical detection of microcystin produced by cyanobacteria

    Science.gov (United States)

    Al-Ammar, R.; Nabok, A.; Hashim, A.; Smith, T.

    2013-06-01

    Microcystin (MC-LR) produced by cyanobacteria (blue-green algae) was detected in direct immunoassay with specific monoclonal antibody MC10E7 using an optical method of Total Internal Reflection Ellipsometry (TIRE). The minimal detected concentration of MC-LR of 0.1 ng/ml is a remarkable achievement for direct immunoassay against such low molecular weight analyte molecule. The study of binding kinetics of MC-LR to MC10E7 antibody allowed the evaluation of the association constant KA of about 108 (l/Mol) typical for highly specific immune reactions. Concentration of MC-LR in aqueous solutions was reduced using an absorbent made of polyelectrolyte-coated microparticles functionalized with MC10E7 antibodies.

  6. Sheet Plasma Produced by Hollow Cathode Discharge

    Institute of Scientific and Technical Information of China (English)

    张龙; 张厚先; 杨宣宗; 冯春华; 乔宾; 王龙

    2003-01-01

    A sheet plasma is produced by a hollow cathode discharge under an axial magnetic field.The plasma is about 40cm in length,4 cm in width and 1cm in thickness.The electron density is about 108cm-3.The hollow cathode is made to be shallow with a large opening,which is different from the ordinary deep hollow cathode.A Langmuir probe is used to detect the plasma.The electron density and the spatial distribution of the plasma change when voltage,pressure and the magnetic field vary.A peak and a data fluctuation at about 200 G-300 G are observed in the variation of electron density(or thickness of the sheet plasma)with the magnetic field.Our work will be helpful in characterizing the sheet plasma and will make the production of dense sheet plasma more controllable.

  7. Inclusion when students produce multimodal digital production

    DEFF Research Database (Denmark)

    Levinsen, Karin Tweddell

    2017-01-01

    was a research and development project based on Action Research and Design Based Research, involving 30 teachers and 800 students in 5. Schools. It ran for 2 years. Data was collected in 1.-2. and 5.-6. grade and two cohorts at a 10. Grades Centre. Due to the complexity, we used mixed methods to produce...... a complementary set of data at both macro and micro-level, containing two data collection strategies • Baseline measures (quantitative and qualitative) at the beginning, middle and end of the project identified overall trajectories of transformation in a diachronic macro-perspective. • Longitudinal......This study presents an important but unexpected outcome pointing at the inclusion-potential of the design for learning-principle (coined by Sørensen & Levinsen): Students as learning designers and students’ digital production found in the large-scale research and development project Students...

  8. Peltier effect for producing low temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Hamerak, K.

    1981-01-01

    In connection with the technically extremely difficult and exacting problems of space travel, years ago in the United States the urgent demand for extremely space-saving and at the same time extremely reliable systems for producing continuously variable low temperatures came up. Neither then nor today the set task could be satisfactorily solved using the usual procedures of low-temperature-technology. Looking for a suitable heat pump the engineers came across a physical phenomenon known for more than 130 years: the Peltier effect. In contrast to conventional thermodynamic heat pumps, cooling or heating can be achieved by means of thermoelectric arrangeemnts based on the Peltier effect and depending on the direction of current. The Peltier cells combine a high reliability of functions with small dimensions since they have no system components in motion.

  9. Tourists Co-producing Guided Tours

    DEFF Research Database (Denmark)

    Larsen, Jonas; Meged, Jane Widtfeldt

    2013-01-01

    be said to perform both in and out of tune with guide's script and the interaction order of guiding more broadly. What is distinctive and innovative about the perspective is that we regard guides and tourists as mutual depending co-producers of the guided tour. First, the article begins with a short......The guided tour is a stigmatized tourist practice. In contrast to studies portraying sightseeing tours as an over-determined stage where tourists passively follow prescripted routes and scripts, this article also uncovers creativity, detours and productive practices. We examine how tourists can...... discussion of some of Goffman's central concepts. Second, we move on to a more general discussion of how front-stage tourism services are performances where both tourist staff and guests play their part. Third, we examine ethnographically how participants on guided tours in Copenhagen co...

  10. The crisis of the radio producing

    Directory of Open Access Journals (Sweden)

    Dr. Raúl Garcés

    2007-09-01

    Full Text Available In a media world highly influenced by new technologies revolution and the increasing impact of television, speeches on radio are frequently polarized: in one side, some scholars argue radio belongs to the past and it is no longer able of attracting younger audiences. In the other, lay those who predict long life to radio as a source of alternative and communitarian communication experiences. The author reviews the arguments that sustain both perspectives and emphasizes the need of renovating radio producing with audacious and creative formulas. At the same time, he discusses some of the challenges Cuban radio has ahead to attract new audiences, when television and printed press are recovering from the economic crack the Island suffered after Eastern European socialism disappeared.

  11. Hydrogenation Technology for Producing Clean Diesel Fuel

    Institute of Scientific and Technical Information of China (English)

    Chen Shuiyin; Xiong Zhenlin; Gao Xiaodong; Nie Hong

    2004-01-01

    With the standard of environmental protection becoming increasingly strict, it is required to remove sulfur and aromatics in diesel deeply. RIPP has developed several new hydrogenation catalysts and flexible processes, by means of which clean diesel fuel with low sulfur and low aromatic contents can be produced. From SRGO (Straight Run Gas Oil), which has an aromatic content of less than 30m%, a low sulfur and low aromatic diesel fuel or ultra-low sulfur diesel can be obtained by adopting a new process operating on highly active RN-series catalysts. From a feed with higher aromatic content (A=30~80m%),such as FCC-LCO, a low sulfur and low aromatic diesel fuel can be obtained by the SSHT, MHUG and DDA processes.

  12. Trip Report-Produced-Water Field Testing

    Energy Technology Data Exchange (ETDEWEB)

    Sullivan, Enid J. [Los Alamos National Laboratory

    2012-05-25

    Los Alamos National Laboratory (LANL) conducted field testing of a produced-water pretreatment apparatus with assistance from faculty at the Texas A&M University (TAMU) protein separation sciences laboratory located on the TAMU main campus. The following report details all of the logistics surrounding the testing. The purpose of the test was to use a new, commercially-available filter media housing containing modified zeolite (surfactant-modified zeolite or SMZ) porous medium for use in pretreatment of oil and gas produced water (PW) and frac-flowback waters. The SMZ was tested previously in October, 2010 in a lab-constructed configuration ('old multicolumn system'), and performed well for removal of benzene, toluene, ethylbenzene, and xylenes (BTEX) from PW. However, a less-expensive, modular configuration is needed for field use. A modular system will allow the field operator to add or subtract SMZ filters as needed to accommodate site specific conditions, and to swap out used filters easily in a multi-unit system. This test demonstrated the use of a commercial filter housing with a simple flow modification and packed with SMZ for removing BTEX from a PW source in College Station, Texas. The system will be tested in June 2012 at a field site in Pennsylvania for treating frac-flowback waters. The goals of this test are: (1) to determine sorption efficiency of BTEX in the new configuration; and (2) to observe the range of flow rates, backpressures, and total volume treated at a given flow rate.

  13. Trametes suaveolens as ligninolytic enzyme producer

    Directory of Open Access Journals (Sweden)

    Knežević Aleksandar

    2013-01-01

    Full Text Available Species of the genus Trametes represent one of the most efficient lignin-degraders which can be attributed to a well developed ligninolytic enzyme system. Current trends are screening of ability of new species to produce these enzymes, as well as the optimization of conditions for their overproduction. Therefore, the aim of the study was to evaluate the potential of T. suaveolens to synthesize laccase and Mn-oxidizing peroxidases during fermentation of the selected plant raw materials. Level of enzyme activities was measured on 7, 10 and 14th day of submersion, as well as the solid-state fermentation of wheat straw and oak sawdust in the presence of NH4NO3 in previously determined optimal nitrogen concentration of 25 mM. The enzyme activity was determined spectrophotometrically using ABTS and phenol red as the substrates. The highest level of laccase activity (1087.1 U/L was noted after 7 days of wheat straw solid-state fermentation, while during the submerged cultivation the production of the enzyme was not noted. Submerged cultivation in oak sawdust-enriched medium was the optimal for activity of Mn-dependent peroxidase (1767.7 U/L on day 14 and Mn-independent peroxidase (1113.7 U/L on day 7. Introduction of T. suaveolens to produce ligninolytic enzyme represented the base for further study, as well as the determination of relation between enzyme activity and rate of lignin degradation. It could lead to greater possibility of fungal species selection with high delignification capacity, which could take participation in sustainable production of food, feed, fibres, and energy, environmentally friendly pollution prevention, and bioremediation.

  14. Aqueous chlorine dioxide treatment of horticultural produce: Effects on microbial safety and produce quality - A review.

    Science.gov (United States)

    Praeger, Ulrike; Herppich, Werner B; Hassenberg, Karin

    2016-05-19

    Microbial load on fresh fruit and vegetables causes decay and losses after harvest and may lead to foodborne illness in case of contamination with human pathogens on raw consumed produces. Washing with tap water only marginally reduces microorganisms attached to produce surfaces. Chlorine is widely used for decontamination on fresh horticultural produces. However, due to harmful by-products and the questionable efficacy it has become increasingly challenged. During the last 20 years, the interest to study ClO2 treatments as an alternative sanitation agent for industrially prepared fresh produce has largely increased. For a wide range of commodities, the application of gaseous ClO2 has meanwhile been investigated. In addition, since several years, the interest in aqueous ClO2 treatments has further risen because of the better manageability in postharvest processing lines compared to gaseous application. This article critically evaluated the effects of postharvest application of aqueous ClO2, either alone or in combination with other treatments, on microbial loads for various horticultural produces. In laboratory investigations, application of aqueous ClO2 at concentrations between 3 and 100 ppm effectively reduced counts of natural or inoculated microorganisms (bacteria, yeasts and mold) in the range of 1 and 5 log. However, various effects of ClO2 treatments on produce quality have been described. These mainly comprise implication on sensory and visual attributes. In this context, there is increasing focus on the potential impacts of aqueous ClO2 on relevant nutritional components of produces such as organic acids or phenolic substances.

  15. Producing Television Agriculture Program: Issues and Problems among Malaysian Television Producers

    Directory of Open Access Journals (Sweden)

    Md. S. Hassan

    2010-01-01

    Full Text Available Problem statement: One of the developing sectors in Malaysia is agriculture. Agriculture doubtlessly has assisted this country in terms of enhancing the economic level, offering a huge number of employment opportunities and uplifting the socio-economy status of the community. To ensure the sustainability of this sector to the country, we must ensure that the valuable agriculture information is continuously provided to the public and the information must be disseminated through the most effective channel. Here, television can be the mean channel. Approach: This study aimed to investigate the issues raised and problems faced by the Malaysian agriculture television program producers in producing the television agriculture programs. Data was collected using an in-depth interview among three agriculture television producers in Malaysia. The questions served as a guide, but allowed respondents freedom and flexibility in their answers. The findings were in the form of descriptive analysis. Results: Based on the analysis done, it can be concluded that the cooperation between Radio Television Malaysia and Department of Agriculture Malaysia is important to ensure the success and continuity of the agriculture programs. It was found that the agriculture programs were evaluated internally by the Radio Television Malaysia auditor and externally by AGB Nielsen. The producers also received feedback from their local and foreign audience in the form of e-mail and telephone. Human resource, transportation and financial are the main problems that need to be overcome by the producers. Conclusion/Recommendations: It is suggested that other media organizations and giant agriculture companies can join RTM in producing agriculture programs. This can aid RTM in producing more innovative agriculture programs and can attract the youth to watch the program.

  16. Producer response to retail egg price in Ogun State Nigeria ...

    African Journals Online (AJOL)

    ... producer price would be an effective incentive for increasing production. ... and Agriculture Organisation (FAO), this paper examined producer response to ... In addition an overhaul of the egg marketing strategy to favour the producers is ...

  17. OXA-48-Producing Enterobacteriaceae Causing Bacteremia, United Arab Emirates

    Directory of Open Access Journals (Sweden)

    Chulsoo Ahn

    2015-01-01

    Full Text Available OXA-48-producing isolates were identified in approximately 4% and less than 1% of ESBL-producing and non-ESBL-producing E. coli and K. pneumoniae causing bacteremia at the largest tertiary hospital in Abu Dhabi.

  18. Methods for producing nanoparticles using palladium salt and uses thereof

    Science.gov (United States)

    Chan, Siu-Wai; Liang, Hongying

    2015-12-01

    The disclosed subject matter is directed to a method for producing nanoparticles, as well as the nanoparticles produced by this method. In one embodiment, the nanoparticles produced by the disclosed method have a high defect density.

  19. Virulence Potential of Activatable Shiga Toxin 2d–Producing Escherichia coli Isolates from Fresh Produce

    Science.gov (United States)

    Melton-Celsa, Angela R.; O'Brien, Alison D.; Feng, Peter C. H.

    2016-01-01

    Shiga toxin (Stx)–producing Escherichia coli (STEC) strains are food- and waterborne pathogens that are often transmitted via beef products or fresh produce. STEC strains cause both sporadic infections and outbreaks, which may result in hemorrhagic colitis and hemolytic uremic syndrome. STEC strains may elaborate Stx1, Stx2, and/or subtypes of those toxins. Epidemiological evidence indicates that STEC that produce subtypes Stx2a, Stx2c, and/or Stx2d are more often associated with serious illness. The Stx2d subtype becomes more toxic to Vero cells after incubation with intestinal mucus or elastase, a process named “activation.” Stx2d is not generally found in the E. coli serotypes most commonly connected to STEC outbreaks. However, STEC strains that are stx2d positive can be isolated from foods, an occurrence that gives rise to the question of whether those food isolates are potential human pathogens. In this study, we examined 14 STEC strains from fresh produce that were stx2d positive and found that they all produced the mucus-activatable Stx2d and that a subset of the strains tested were virulent in streptomycin-treated mice. PMID:26555533

  20. Virulence Potential of Activatable Shiga Toxin 2d-Producing Escherichia coli Isolates from Fresh Produce.

    Science.gov (United States)

    Melton-Celsa, Angela R; O'Brien, Alison D; Feng, Peter C H

    2015-11-01

    Shiga toxin (Stx)-producing Escherichia coli (STEC) strains are food- and waterborne pathogens that are often transmitted via beef products or fresh produce. STEC strains cause both sporadic infections and outbreaks, which may result in hemorrhagic colitis and hemolytic uremic syndrome. STEC strains may elaborate Stx1, Stx2, and/or subtypes of those toxins. Epidemiological evidence indicates that STEC that produce subtypes Stx2a, Stx2c, and/or Stx2d are more often associated with serious illness. The Stx2d subtype becomes more toxic to Vero cells after incubation with intestinal mucus or elastase, a process named "activation." Stx2d is not generally found in the E. coli serotypes most commonly connected to STEC outbreaks. However, STEC strains that are stx2d positive can be isolated from foods, an occurrence that gives rise to the question of whether those food isolates are potential human pathogens. In this study, we examined 14 STEC strains from fresh produce that were stx2d positive and found that they all produced the mucus-activatable Stx2d and that a subset of the strains tested were virulent in streptomycin-treated mice.

  1. Hydrofocusing Bioreactor Produces Anti-Cancer Alkaloids

    Science.gov (United States)

    Gonda, Steve R.; Valluri, Jagan V.

    2011-01-01

    A methodology for growing three-dimensional plant tissue models in a hydrodynamic focusing bioreactor (HFB) has been developed. The methodology is expected to be widely applicable, both on Earth and in outer space, as a means of growing plant cells and aggregates thereof under controlled conditions for diverse purposes, including research on effects of gravitation and other environmental factors upon plant growth and utilization of plant tissue cultures to produce drugs in quantities greater and at costs lower than those of conventional methodologies. The HFB was described in Hydro focus - ing Bioreactor for Three-Dimensional Cell Culture (MSC-22358), NASA Tech Briefs, Vol. 27, No. 3 (March 2003), page 66. To recapitulate: The HFB offers a unique hydrofocusing capability that enables the creation of a low-shear liquid culture environment simultaneously with the herding of suspended cells and tissue assemblies and removal of unwanted air bubbles. The HFB includes a rotating cell-culture vessel with a centrally located sampling port and an internal rotating viscous spinner attached to a rotating base. The vessel and viscous spinner can be made to rotate at the same speed and direction or different speeds and directions to tailor the flow field and the associated hydrodynamic forces in the vessel in order to obtain low-shear suspension of cells and control of the locations of cells and air bubbles. For research and pharmaceutical-production applications, the HFB offers two major benefits: low shear stress, which promotes the assembly of cells into tissue-like three-dimensional constructs; and randomization of gravitational vectors relative to cells, which affects production of medicinal compounds. Presumably, apposition of plant cells in the absence of shear forces promotes cell-cell contacts, cell aggregation, and cell differentiation. Only gentle mixing is necessary for distributing nutrients and oxygen. It has been postulated that inasmuch as cells in the simulated

  2. Klebsiella pneumoniae produces no histamine: Raoultella planticola and Raoultella ornithinolytica strains are histamine producers.

    Science.gov (United States)

    Kanki, Masashi; Yoda, Tomoko; Tsukamoto, Teizo; Shibata, Tadayoshi

    2002-07-01

    Histamine fish poisoning is caused by histamine-producing bacteria (HPB). Klebsiella pneumoniae and Klebsiella oxytoca are the best-known HPB in fish. However, 22 strains of HPB from fish first identified as K. pneumoniae or K. oxytoca by commercialized systems were later correctly identified as Raoultella planticola (formerly Klebsiella planticola) by additional tests. Similarly, five strains of Raoultella ornithinolytica (formerly Klebsiella ornithinolytica) were isolated from fish as new HPB. R. planticola and R. ornithinolytica strains were equal in their histamine-producing capabilities and were determined to possess the hdc genes, encoding histidine decarboxylase. On the other hand, a collection of 61 strains of K. pneumoniae and 18 strains of K. oxytoca produced no histamine.

  3. Minimizing water consumption when producing hydropower

    Science.gov (United States)

    Leon, A. S.

    2015-12-01

    In 2007, hydropower accounted for only 16% of the world electricity production, with other renewable sources totaling 3%. Thus, it is not surprising that when alternatives are evaluated for new energy developments, there is strong impulse for fossil fuel or nuclear energy as opposed to renewable sources. However, as hydropower schemes are often part of a multipurpose water resources development project, they can often help to finance other components of the project. In addition, hydropower systems and their associated dams and reservoirs provide human well-being benefits, such as flood control and irrigation, and societal benefits such as increased recreational activities and improved navigation. Furthermore, hydropower due to its associated reservoir storage, can provide flexibility and reliability for energy production in integrated energy systems. The storage capability of hydropower systems act as a regulating mechanism by which other intermittent and variable renewable energy sources (wind, wave, solar) can play a larger role in providing electricity of commercial quality. Minimizing water consumption for producing hydropower is critical given that overuse of water for energy production may result in a shortage of water for other purposes such as irrigation, navigation or fish passage. This paper presents a dimensional analysis for finding optimal flow discharge and optimal penstock diameter when designing impulse and reaction water turbines for hydropower systems. The objective of this analysis is to provide general insights for minimizing water consumption when producing hydropower. This analysis is based on the geometric and hydraulic characteristics of the penstock, the total hydraulic head and the desired power production. As part of this analysis, various dimensionless relationships between power production, flow discharge and head losses were derived. These relationships were used to withdraw general insights on determining optimal flow discharge and

  4. Laser-produced plasma source system development

    Science.gov (United States)

    Fomenkov, Igor V.; Brandt, David C.; Bykanov, Alexander N.; Ershov, Alexander I.; Partlo, William N.; Myers, David W.; Böwering, Norbert R.; Vaschenko, Georgiy O.; Khodykin, Oleh V.; Hoffman, Jerzy R.; Vargas L., Ernesto; Simmons, Rodney D.; Chavez, Juan A.; Chrobak, Christopher P.

    2007-03-01

    This paper describes the development of laser produced plasma (LPP) technology as an EUV source for advanced scanner lithography applications in high volume manufacturing. EUV lithography is expected to succeed 193 nm immersion technology for critical layer patterning below 32 nm beginning with beta generation scanners in 2009. This paper describes the development status of subsystems most critical to the performance to meet joint scanner manufacturer requirements and semiconductor industry standards for reliability and economic targets for cost of ownership. The intensity and power of the drive laser are critical parameters in the development of extreme ultraviolet LPP lithography sources. The conversion efficiency (CE) of laser light into EUV light is strongly dependent on the intensity of the laser energy on the target material at the point of interaction. The total EUV light generated then scales directly with the total incident laser power. The progress on the development of a short pulse, high power CO2 laser for EUV applications is reported. The lifetime of the collector mirror is a critical parameter in the development of extreme ultra-violet LPP lithography sources. The deposition of target materials and contaminants, as well as sputtering of the collector multilayer coating and implantation of incident particles can reduce the reflectivity of the mirror substantially over the exposure time even though debris mitigation schemes are being employed. The results of measurements of high energy ions generated by a short-pulse CO2 laser on a laser-produced plasma EUV light source with Sn target are presented. Droplet generation is a key element of the LPP source being developed at Cymer for EUV lithography applications. The main purpose of this device is to deliver small quantities of liquid target material as droplets to the laser focus. The EUV light in such configuration is obtained as a result of creating a highly ionized plasma from the material of the

  5. Does developmental hypothyroidism produce lasting effects ...

    Science.gov (United States)

    The subgranular zone of the dentate gyrus (DO) of the adult hippocampus generates new neurons throughout life. Thyroid hormones (TH) are essential for brain development, but impaired neurogenesis with adult hypothyroidism has also been reported. We investigated the role of milder degrees of TH disruption on adult neurogenesis following hypothyroidism induced during development, in adulthood, or both. Pregnant dams were administered the TH synthesis inhibitor, propylthiouracil (PTU, 0 or 3ppm in drinking water) from gestational day 6 and pups were weaned to control water on postnatal day (PN)2 I. On PN6O, offspring from control or PTU dams were either re-exposed to PTU (3ppm) for I month or maintained on control. Bromodeoxyuridine (BrdU 50 mg/kg, ip, twice daily) was administered to all animals on the last 5 days of the re-exposure period, and animals sacrificed 28 d later. Animals were perfused intracardially, the brains were removed, embedded in a MultiBrain (NSA) array and freeze sectioned. Every 8th section throughout the hippocampus was stained with an antibody against BrdU to mark actively dividing cells. The volume of the DO and the number of BrdUpositive cells were assessed from images captured on a Nikon microscope (200X) and Nikon Elements software. Preliminary findings indicate that developmental exposure to PTU produced a persistent reduction in the volume of the adult DO. BrdU cell counts were reduced similarly in all P11J-exposed groups. These data

  6. Method and apparatus for producing chlorine dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Santillie, P.W.; Ramras, D.M.

    1984-05-29

    A continuous method and apparatus are described for the efficient production of gaseous chlorine dioxide by the reaction between gaseous sulfur dioxide and an aqueous solution of a metallic chlorate. The chlorate solution and a highly concentrated sulfur dioxide gas are introduced into a packed columnar chamber at closely adjacent locations at the bottom of the chamber so as to flood the chamber and maximize both the contact area and contact time of the two reactants. Throughout the reaction the chamber is subjected to high vacuum imposed by an eductor which exhausts the chlorine dioxide gas and spent reactants. For use of the chlorine dioxide to produce potable water or treat foodstuffs, the chlorine dioxide and spent reactants are exhausted from the chamber separately by respective eductors substantially balanced with respect to each other to impose comparable vacuums upon the chamber. Because of the high efficency of the reaction, substantial heat is generated therefrom which is absorbed by a coolant flowing through a jacket surrounding the chamber. The flow rate of the coolant and flow rate of the reactants into the chamber are porportional due to the dependency of the reactant flow rate on the coolant flow rate.

  7. Performance profiles of major energy producers, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-01-01

    The energy industry generally and petroleum and natural gas operations in particular are frequently reacting to a variety of unsettling forces. Falling oil prices, economic upswings, currency devaluations, increasingly rigorous environmental quality standards, deregulation of electricity markets, and continued advances in exploration and production technology were among the challenges and opportunities to the industry in 1997. To analyze the extent to which these and other developments have affected energy industry financial and operating performance, strategies, and industry structure, the Energy Information Administration (EIA) maintains the Financial Reporting Systems (FRS). Through Form EIA-28, major US energy companies annually report to the FRS. Financial and operating information is reported by major lines of business, including oil and gas production (upstream), petroleum refining and marketing (downstream), other energy operations, and nonenergy business. Performance Profiles of Major Producers 1997 examines the interplays of energy markets, companies` strategies, and government policies (in 1997 and in historical context) that gave rise to the results given here. The report also analyzes other key aspects of energy company financial performance as seen through the multifaceted lens provided by the FRS data and complementary data for industry overall. 41 figs., 77 tabs.

  8. Spectroscopic Studies of Laser Produced Plasma Metasurfaces

    Science.gov (United States)

    Colon Quinones, Roberto; Underwood, Thomas; Cappelli, Mark

    2016-10-01

    In this presentation, we describe the spatial and temporal plasma characteristics of the dense plasma kernels that are used to construct a laser produced plasma metasurface (PM) that is intended to serve as a tunable THz reflector. The PM is an n x n array of plasmas generated by focusing the light from a 2 J/p Q-switched Nd:YAG laser through a multi-lens array (MLA) and into a gas of varying pressure. A gated CCD camera coupled to a high-resolution spectrometer is used to obtain chord-averaged H α broadening data for the cross section of a single plasma element at the lens focal point. The data is then Abel inverted to derive the radial plasma density distribution. Measurements are repeated for a range of pressures, laser energies, and lens f-number, with a time resolution of 100 ns and a gate width of 20 ns. Results are presented for the variation of plasma density and size over these different conditions. Work supported by the Air Force Office of Scientific Research (AFOSR). R. Colon Quinones and T. Underwood acknowledge the support of the Department of Defense (DoD) through the National Defense Science & Engineering Graduate Fellowship (NDSEG) Program.

  9. Asymmetric vector mesons produced in nuclear collisions

    CERN Document Server

    Dremin, I M

    2016-01-01

    It is argued that the experimentally observed phenomenon of asymmetric shapes of vector mesons produced in nuclear media during high energy nucleus-nucleus collisions can be explained as Fano-Feshbach resonances. It has been observed that the mass distributions of lepton pairs created at meson decays decline from the traditional Breit-Wigner shape with some excess in the low-mass wing of the resonance. It is clear that the whole phenomenon is related to some interaction with the nuclear medium. Moreover, it can be further detalized in quantum mechanics as the interference of direct and continuum states in Fano-Feshbach effect. To reveal the nature of the interaction it is proposed to use a phenomenological model of the additional contribution due to Cherenkov gluons. They can be created because of the excess of the refractivity index over 1 just in the low-mass wing as required by the classical Cherenkov treatment. In quantum mechanics, this requirement is related to the positive real part of the interaction ...

  10. Earthworms produce phytochelatins in response to arsenic.

    Directory of Open Access Journals (Sweden)

    Manuel Liebeke

    Full Text Available Phytochelatins are small cysteine-rich non-ribosomal peptides that chelate soft metal and metalloid ions, such as cadmium and arsenic. They are widely produced by plants and microbes; phytochelatin synthase genes are also present in animal species from several different phyla, but there is still little known about whether these genes are functional in animals, and if so, whether they are metal-responsive. We analysed phytochelatin production by direct chemical analysis in Lumbricus rubellus earthworms exposed to arsenic for a 28 day period, and found that arsenic clearly induced phytochelatin production in a dose-dependent manner. It was necessary to measure the phytochelatin metabolite concentrations directly, as there was no upregulation of phytochelatin synthase gene expression after 28 days: phytochelatin synthesis appears not to be transcriptionally regulated in animals. A further untargetted metabolomic analysis also found changes in metabolites associated with the transsulfuration pathway, which channels sulfur flux from methionine for phytochelatin synthesis. There was no evidence of biological transformation of arsenic (e.g. into methylated species as a result of laboratory arsenic exposure. Finally, we compared wild populations of earthworms sampled from the field, and found that both arsenic-contaminated and cadmium-contaminated mine site worms had elevated phytochelatin concentrations.

  11. Recovery of carboxylic acids produced by fermentation.

    Science.gov (United States)

    López-Garzón, Camilo S; Straathof, Adrie J J

    2014-01-01

    Carboxylic acids such as citric, lactic, succinic and itaconic acids are useful products and are obtained on large scale by fermentation. This review describes the options for recovering these and other fermentative carboxylic acids. After cell removal, often a primary recovery step is performed, using liquid-liquid extraction, adsorption, precipitation or conventional electrodialysis. If the carboxylate is formed rather than the carboxylic acid, the recovery process involves a step for removing the cation of the formed carboxylate. Then, bipolar electrodialysis and thermal methods for salt splitting can prevent that waste inorganic salts are co-produced. Final carboxylic acid purification requires either distillation or crystallization, usually involving evaporation of water. Process steps can often be combined synergistically. In-situ removal of carboxylic acid by extraction during fermentation is the most popular approach. Recovery of the extractant can easily lead to waste inorganic salt formation, which counteracts the advantage of the in-situ removal. For industrial production, various recovery principles and configurations are used, because the fermentation conditions and physical properties of specific carboxylic acids differ.

  12. KPC-producing Enterobacter aerogenes infection

    Directory of Open Access Journals (Sweden)

    Felipe F. Tuon

    2015-06-01

    Full Text Available Background: Enterobacteris a common nosocomial microorganism and its carbapenem's resistance has increased. The management of these cases is unclear.Objective: We evaluated 16 patients with KPC-producing Enterobacter aerogenesinfections, detailing the site of infection, therapy, clinical and epidemiological data.Methods: A retrospective and descriptive study. Clinical data were revised and KPC-2 detection was by molecular methods. Risk factors associated with mortality were compared using appropriate tests according to variable type with a significance level of 0.05.Results: The 30-day mortality rate was 37.5% with no association with inadequate treatment. Age (p= 0.004 and Charlson score of comorbidities (p= 0.048 were independent risk factors associated with death in the multivariate analysis. The odds ratio for age >43 years was 3.00 (95% CI: 1.02-9.32 and for Charlson score >3 was 2.00 (95% CI: 1.08-3.71. Five strains were pan-resistant based on automated susceptibility tests. All patients were treated with monotherapy.Conclusion: The clinician should be alert to carbapenem-resistant Enterobacteriaceaeinfection in older patients with comorbidities. The mortality is high and we believe that prompt and adequate therapy must be employed.

  13. Produced fluids separation using a coalascer column

    Energy Technology Data Exchange (ETDEWEB)

    Renouf, G.; Soveran, D.; Soveran, L. [Saskatchewan Research Council, Saskatoon, SK (Canada)

    2005-07-01

    This paper reports the results of a laboratory study in which a coalescer column was used to successfully remove water from produced heavy oil emulsions. The coalescer column is a simple, inexpensive, and environmentally friendly technology that can improve basic sediment and water values after 4 hours of settling time by about 38 per cent. The laboratory study tested the use of the column, and the effects of column length, column packing size, temperature, flow rate, demulsifier concentration, and water addition. More than 100 tests were conducted and 24 pairs of tests compared the treating effects with and without the column. The use of the coalescer column in the treatment facility resulted in a a reduction of demulsifier concentration from 250 ppm to 70 ppm, translating to an annual cost savings of $320,000 to $1,100,000 per battery. Incorporating the coalescer column also allowed operators to reduce both temperatures and demulsifier concentrations. The column also promoted faster treating. Water droplets grew by as much as 34 per cent, suggesting that treating time could be faster by 21 to 80 per cent. It was concluded that the coalescer column was very successful at improving water removal from heavy oil battery emulsions. 22 refs., 9 tabs., 7 figs.

  14. Membrane emulsification to produce perfume microcapsules

    Science.gov (United States)

    Pan, Xuemiao

    Microencapsulation is an efficient technology to deliver perfume oils from consumer products onto the surface of fabrics. Microcapsules having uniform size/mechanical strength, may provide better release performance. Membrane emulsification in a dispersion cell followed by in-situ polymerization was used to prepare narrow size distribution melamine-formaldehyde (MF) microcapsules containing several types of oil-based fragrances or ingredients. Investigated in this study are the parameters impacting to the size and size distribution of the droplets and final MF microcapsules. A pilot plant-scale cross-flow membrane system was also used to produce MF microcapsules, demonstrating that the membrane emulsification process has potential to be scaled up for industrial applications. In this study, health and environmental friendly poly (methyl methacrylate) (PMMA) microcapsules with narrow size distribution were also prepared for the first time using the dispersion cell membrane emulsification system. Characterization methods previously used for thin-shell microcapsules were expanded to analyse microcapsules with thick shells. The intrinsic mechanical properties of thick shells were determined using a micromanipulation technique and finite element analysis (FEM). The microcapsules structure was also considered in the determination of the permeability and diffusivity of the perfume oils in good solvents..

  15. Possible arrhythmiogenic mechanism produced by ibuprofen

    Institute of Scientific and Technical Information of China (English)

    Zhi-fang YANG; Hong-wei WANG; Yan-qian ZHENG; Yin ZHANG; Yuan-mou LIU; Ci-zhen LI

    2008-01-01

    Aim:The aim of the present study was to investigate the electrophysiological effect of ibuprofen on the cardiac action potentials (AP) and electrocardiograms (ECG), and to identify its arrhythmiogenic mechanism. Methods:The intracellular microelectrode recording technique was employed to record the fast- and slow-response AP in guinea pig papillary muscles. The cardiac responses of ibuprofen were monitored by ECG, both in in vivo and in vitro studies. Results:The ECG recording revealed that ibuprofen could induce arrhythmias, both in vitro and in vivo. Fatal ventricular fibrillations are readily produced in in vitro experiments by ibuprofen. Our results show that ibuprofen could dose dependently shorten the duration of AP and the effective refractory period (ERP), and it could also de-crease the maximum depolarization velocity of phase 0 (Vmax) in both the fast- and slow-response AP. The duration of the QRS complex wave (QRS duration) in ECG was prolonged. Although the heart rate was depressed by ibuprofen, the corrected QT interval duration (QTc) decreased. Conclusion:lbuprofen could inhibit cardiac Na+ and Ca2+ channels as it slows Vmax in both fast- and slow-response AE Furthermore, ibuprofen shortens the ERP and decreases the exci-tation propagation within the heart, which might provide a substrate for an arrhythmiogenic re-entry circuit. Taken together, we conclude that ihuprofen, when used improperly, may impose a potential hazard in inducing cardiac arrhythmias in patients with existing heart diseases.

  16. Asymmetric vector mesons produced in nuclear collisions

    Energy Technology Data Exchange (ETDEWEB)

    Dremin, I.M.; Nechitailo, V.A. [Lebedev Physical Institute, Moscow (Russian Federation); National Research Nuclear University ' ' MEPhI' ' , Moscow (Russian Federation)

    2016-09-15

    It is argued that the experimentally observed phenomenon of asymmetric shapes of vector mesons produced in nuclear media during high-energy nucleus-nucleus collisions can be explained as Fano-Feshbach resonances. It has been observed that the mass distributions of lepton pairs created at meson decays decline from the traditional Breit-Wigner shape with some excess in the low-mass wing of the resonance. It is clear that the whole phenomenon is related to some interaction with the nuclear medium. Moreover, it can be further described in quantum mechanics as the interference of direct and continuum states in the Fano-Feshbach effect. To reveal the nature of the interaction it is proposed to use a phenomenological model of the additional contribution due to Cherenkov gluons. They can be created because of the excess of the refractivity index over 1 just in the low-mass wing as required by the classical Cherenkov treatment. In quantum mechanics, this requirement is related to the positive real part of the interaction amplitude in this wing. The corresponding parameters are found from the comparison with ρ-meson data and admit reasonable explanation. (orig.)

  17. A method for producing n-paraffins

    Energy Technology Data Exchange (ETDEWEB)

    Lipert, Yu.I.; Cherner, A.M.; Galdina, L.V.; Moiseyev, A.I.; Pereverzev, A.N.; Prokovyev, V.P.; Roshin, Yu.N.; Vinogradova, G.I.

    1983-01-01

    In the method for producing n-paraffins through processing a petroleum product with an aqueous solution of carbamide, in order to increase the output of the n-paraffins, the aqueous carbamide solution is supplied in two portions. First 60 to 90 percent of the carbamide is used in the form of a 70 to 90 percent solution and then the remaining 10 to 40 percent is supplied in the form of a 20 to 60 percent solution. The volume of water and carbamide in the proposed method remains the same as in the prototype and only the concentration of the carbamide is redistributed in the steps of supply. For the introduction of the method only insignificant additional power expenditures are required for the acquisition of a more concentrated solution of carbamide for the supply in the first portion of the complex formation. Industrial streams of a carbamide solution from an intermediate stage of thickening of the diluted carbamide solution may be used in the second stage.

  18. Asymmetric vector mesons produced in nuclear collisions

    Science.gov (United States)

    Dremin, I. M.; Nechitailo, V. A.

    2016-09-01

    It is argued that the experimentally observed phenomenon of asymmetric shapes of vector mesons produced in nuclear media during high-energy nucleus-nucleus collisions can be explained as Fano-Feshbach resonances. It has been observed that the mass distributions of lepton pairs created at meson decays decline from the traditional Breit-Wigner shape with some excess in the low-mass wing of the resonance. It is clear that the whole phenomenon is related to some interaction with the nuclear medium. Moreover, it can be further described in quantum mechanics as the interference of direct and continuum states in the Fano-Feshbach effect. To reveal the nature of the interaction it is proposed to use a phenomenological model of the additional contribution due to Cherenkov gluons. They can be created because of the excess of the refractivity index over 1 just in the low-mass wing as required by the classical Cherenkov treatment. In quantum mechanics, this requirement is related to the positive real part of the interaction amplitude in this wing. The corresponding parameters are found from the comparison with ρ-meson data and admit reasonable explanation.

  19. Methods for producing silicon carbide architectural preforms

    Science.gov (United States)

    DiCarlo, James A. (Inventor); Yun, Hee (Inventor)

    2010-01-01

    Methods are disclosed for producing architectural preforms and high-temperature composite structures containing high-strength ceramic fibers with reduced preforming stresses within each fiber, with an in-situ grown coating on each fiber surface, with reduced boron within the bulk of each fiber, and with improved tensile creep and rupture resistance properties for each fiber. The methods include the steps of preparing an original sample of a preform formed from a pre-selected high-strength silicon carbide ceramic fiber type, placing the original sample in a processing furnace under a pre-selected preforming stress state and thermally treating the sample in the processing furnace at a pre-selected processing temperature and hold time in a processing gas having a pre-selected composition, pressure, and flow rate. For the high-temperature composite structures, the method includes additional steps of depositing a thin interphase coating on the surface of each fiber and forming a ceramic or carbon-based matrix within the sample.

  20. Earthworms produce phytochelatins in response to arsenic.

    Science.gov (United States)

    Liebeke, Manuel; Garcia-Perez, Isabel; Anderson, Craig J; Lawlor, Alan J; Bennett, Mark H; Morris, Ceri A; Kille, Peter; Svendsen, Claus; Spurgeon, David J; Bundy, Jacob G

    2013-01-01

    Phytochelatins are small cysteine-rich non-ribosomal peptides that chelate soft metal and metalloid ions, such as cadmium and arsenic. They are widely produced by plants and microbes; phytochelatin synthase genes are also present in animal species from several different phyla, but there is still little known about whether these genes are functional in animals, and if so, whether they are metal-responsive. We analysed phytochelatin production by direct chemical analysis in Lumbricus rubellus earthworms exposed to arsenic for a 28 day period, and found that arsenic clearly induced phytochelatin production in a dose-dependent manner. It was necessary to measure the phytochelatin metabolite concentrations directly, as there was no upregulation of phytochelatin synthase gene expression after 28 days: phytochelatin synthesis appears not to be transcriptionally regulated in animals. A further untargetted metabolomic analysis also found changes in metabolites associated with the transsulfuration pathway, which channels sulfur flux from methionine for phytochelatin synthesis. There was no evidence of biological transformation of arsenic (e.g. into methylated species) as a result of laboratory arsenic exposure. Finally, we compared wild populations of earthworms sampled from the field, and found that both arsenic-contaminated and cadmium-contaminated mine site worms had elevated phytochelatin concentrations.

  1. Lifecycle of laser-produced air sparks

    Energy Technology Data Exchange (ETDEWEB)

    Harilal, S. S., E-mail: hari@pnnl.gov; Brumfield, B. E.; Phillips, M. C. [Pacific Northwest National Laboratory, P.O. Box 999, Richland, Washington 99352 (United States)

    2015-06-15

    We investigated the lifecycle of laser-generated air sparks or plasmas using multiple plasma diagnostic tools. The sparks were generated by focusing the fundamental radiation from an Nd:YAG laser in air, and studies included early and late time spark dynamics, decoupling of the shock wave from the plasma core, emission from the spark kernel, cold gas excitation by UV radiation, shock waves produced by the air spark, and the spark's final decay and turbulence formation. The shadowgraphic and self-emission images showed similar spark morphology at earlier and late times of its lifecycle; however, significant differences are seen in the midlife images. Spectroscopic studies in the visible region showed intense blackbody-type radiation at early times followed by clearly resolved ionic, atomic, and molecular emission. The detected spectrum at late times clearly contained emission from both CN and N{sub 2}{sup +}. Additional spectral features have been identified at late times due to emission from O and N atoms, indicating some degree of molecular dissociation and excitation. Detailed spatially and temporally resolved emission analysis provides insight about various physical mechanisms leading to molecular and atomic emission by air sparks, including spark plasma excitation, heating of cold air by UV radiation emitted by the spark, and shock-heating.

  2. Gold nanoparticles produced in a microalga

    Science.gov (United States)

    Luangpipat, Tiyaporn; Beattie, Isabel R.; Chisti, Yusuf; Haverkamp, Richard G.

    2011-12-01

    An efficient biological route to production of gold nanoparticles which allows the nanoparticles to be easily recovered remains elusive. Live cells of the green microalga Chlorella vulgaris were incubated with a solution of gold chloride and harvested by centrifugation. Nanoparticles inside intact cells were identified by transmission electron microscopy and confirmed to be metallic gold by synchrotron based X-ray powder diffraction and X-ray absorption spectroscopy. These intracellular gold nanoparticles were 40-60 nm in diameter. At a concentration of 1.4% Au in the alga, a better than 97% recovery of the gold from solution was achieved. A maximum of 4.2% Au in the alga was obtained. Exposure of C. vulgaris to solutions containing dissolved salts of palladium, ruthenium, and rhodium also resulted in the production of the corresponding nanoparticles within the cells. These were surmised to be also metallic, but were produced at a much lower intracellular concentration than achieved with gold. Iridium was apparently toxic to the alga. No nanoparticles were observed using platinum solutions. C. vulgaris provides a possible route to large scale production of gold nanoparticles.

  3. Single oral doses of (±) 3,4-methylenedioxymethamphetamine ('Ecstasy') produce lasting serotonergic deficits in non-human primates: relationship to plasma drug and metabolite concentrations.

    Science.gov (United States)

    Mueller, Melanie; Yuan, Jie; McCann, Una D; Hatzidimitriou, George; Ricaurte, George A

    2013-05-01

    Repeated doses of the popular recreational drug methylenedioxymethamphetamine (MDMA, 'Ecstasy') are known to produce neurotoxic effects on brain serotonin (5-HT) neurons but it is widely believed that typical single oral doses of MDMA are free of neurotoxic risk. Experimental and therapeutic trials with MDMA in humans are underway. The mechanisms by which MDMA produces neurotoxic effects are not understood but drug metabolites have been implicated. The aim of the present study was to assess the neurotoxic potential of a range of clinically relevant single oral doses of MDMA in a non-human primate species that metabolizes MDMA in a manner similar to humans, the squirrel monkey. A secondary objective was to explore the relationship between plasma MDMA and metabolite concentrations and lasting serotonergic deficits. Single oral doses of MDMA produced lasting dose-related serotonergic neurochemical deficits in the brains of squirrel monkeys. Notably, even the lowest dose of MDMA tested (5.7 mg/kg, estimated to be equivalent to 1.6 mg/kg in humans) produced significant effects in some brain regions. Plasma levels of MDMA engendered by neurotoxic doses of MDMA were on the order of those found in humans. Serotonergic neurochemical markers were inversely correlated with plasma concentrations of MDMA, but not with those of its major metabolites, 3,4-dihydroxymethamphetamine and 4-hydroxy-3-methoxymethamphetamine. These results suggest that single oral doses of MDMA in the range of those used by humans pose a neurotoxic risk and implicate the parent compound (MDMA), rather than one of its metabolites, in MDMA-induced 5-HT neural injury.

  4. Molecular characterization of patulin producing and non-producing Penicillium species in apples from Morocco.

    Science.gov (United States)

    Rharmitt, Sanae; Hafidi, Majida; Hajjaj, Hassan; Scordino, Fabio; Giosa, Domenico; Giuffrè, Letterio; Barreca, Davide; Criseo, Giuseppe; Romeo, Orazio

    2016-01-18

    The isolation of patulin-producing Penicillia in apples collected in different markets in four localities in Morocco is reported. Fungi were identified by β-tubulin sequencing and further characterized using a specific PCR-based method targeting the isoepoxydon dehydrogenase (IDH) gene to discriminate between patulin-producing and non-producing strains. Production of patulin was also evaluated using standard cultural and biochemical methods. Results showed that 79.5% of contaminant fungi belonged to the genus Penicillium and that Penicillium expansum was the most isolated species (83.9%) followed by Penicillium chrysogenum (~9.7%) and Penicillium crustosum (~6.4%). Molecular analysis revealed that 64.5% of the Penicillium species produced the expected IDH-amplicon denoting patulin production in these strains. However, patulin production was not chemically confirmed in all P. expansum strains. The isolation of IDH(-)/patulin(+) strains poses the hypothesis that gentisylaldehyde is not a direct patulin precursor, supporting previous observations that highlighted the importance of the gentisyl alcohol in the production of this mycotoxin. Total agreement between IDH-gene detection and cultural/chemical methods employed was observed in 58% of P. expansum strains and for 100% of the other species isolated. Overall the data reported here showed a substantial genetic variability within P. expansum population from Morocco.

  5. Method of producing superplastic alloys and superplastic alloys produced by the method

    Science.gov (United States)

    Troeger, Lillianne P. (Inventor); Starke, Jr., Edgar A. (Inventor); Crooks, Roy (Inventor)

    2002-01-01

    A method for producing new superplastic alloys by inducing in an alloy the formation of precipitates having a sufficient size and homogeneous distribution that a sufficiently refined grain structure to produce superplasticity is obtained after subsequent PSN processing. An age-hardenable alloy having at least one dispersoid phase is selected for processing. The alloy is solution heat-treated and cooled to form a supersaturated solid solution. The alloy is plastically deformed sufficiently to form a high-energy defect structure useful for the subsequent heterogeneous nucleation of precipitates. The alloy is then aged, preferably by a multi-stage low and high temperature process, and precipitates are formed at the defect sites. The alloy then is subjected to a PSN process comprising plastically deforming the alloy to provide sufficient strain energy in the alloy to ensure recrystallization, and statically recrystallizing the alloy. A grain structure exhibiting new, fine, equiaxed and uniform grains is produced in the alloy. An exemplary 6xxx alloy of the type capable of being produced by the present invention, and which is useful for aerospace, automotive and other applications, is disclosed and claimed. The process is also suitable for processing any age-hardenable aluminum or other alloy.

  6. Adaptive evolution of drug targets in producer and non-producer organisms

    DEFF Research Database (Denmark)

    Hansen, Bjarne Gram; Sun, Xin E.; Genee, Hans Jasper;

    2012-01-01

    -B of Penicillium chrysogenum, which does not produce MPA, is also a very poor enzyme. The MPA-binding site is completely conserved among sensitive and resistant IMPDHs. Mutational analysis shows that the C-terminal segment is a major structural determinant of resistance. These observations suggest...

  7. Producing and optimizing novel materials and structures

    Science.gov (United States)

    Ashrafi, Mahdi

    2011-12-01

    A series of detailed experimental and finite element investigations were carried out to study the response of selected objects which are currently utilized for load carrying. These investigations were later applied to optimize the mechanical performance of the studied structures and materials. First, a number of experiments and detailed finite element simulations were carried out to study the response and failure of single lap joints with non-flat interface under uniaxial tension. The adherents were made from fiber reinforced epoxy composite and the custom-made mold allowed the fibers to follow the profile of the bonded joint interface. The experiments showed that the interface shape has significant effect on the mechanical behavior and strength of the bonded joints. Finite element simulations were performed to estimate the distribution of shear and peeling stresses along the bonded joints and the results were linked to the experimental investigations. Additional parametric calculations were also carried out to highlight the role of interface shape on the distribution of stresses, and inherently the overall strength and behavior of the bonded joints. In addition, the role of a central void on the distribution of the stresses in a bonded joint with flat and non-flat sinusoidal interfaces was investigated. The second topic concerns Wood Plastic Composites (WPC) which are widely used in the industry due to its durability, low cost, and anti-moisture properties in comparison with the natural wood. In this research, we have produced flout shaped WPC samples using African black wood powder and Phenolic resin in a hot compression molding set-up. Initial WPC composites were produced by systematically changing the wood volume fraction. Based on these results the optimum temperature, pressure and wood volume fraction for developing WPC in a form of a flute is developed. A series of experimental procedures were performed to improve mechanical properties of WPC samples by

  8. 7 CFR 1131.10 - Producer-handler.

    Science.gov (United States)

    2010-01-01

    ... and management of the producer-handler and are operated as the producer-handler's own enterprise and... as the producer-handler's own enterprise and at its sole risk. (3) The producer-handler neither... care and management of the dairy animals and the other resources and facilities designated in...

  9. 29 CFR 779.108 - Goods produced for commerce.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Goods produced for commerce. 779.108 Section 779.108 Labor... Coverage Employees Engaged in Commerce Or in the Production of Goods for Commerce § 779.108 Goods produced for commerce. Goods are “produced for commerce” if they are “produced, manufactured, mined, handled...

  10. 7 CFR 955.10 - Producer-handler.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Producer-handler. 955.10 Section 955.10 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... Definitions § 955.10 Producer-handler. Producer-Handler means a producer who handles Vidalia onions....

  11. 7 CFR 1126.61 - Computation of producer price differential.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Computation of producer price differential. 1126.61... MARKETING AREA Order Regulating Handling Producer Price Differential § 1126.61 Computation of producer price differential. For each month the market administrator shall compute a producer price differential...

  12. 7 CFR 1030.61 - Computation of producer price differential.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Computation of producer price differential. 1030.61... MIDWEST MARKETING AREA Order Regulating Handling Producer Price Differential § 1030.61 Computation of producer price differential. For each month the market administrator shall compute a producer...

  13. 7 CFR 1032.61 - Computation of producer price differential.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Computation of producer price differential. 1032.61... MARKETING AREA Order Regulating Handling Producer Price Differential § 1032.61 Computation of producer price differential. For each month the market administrator shall compute a producer price differential...

  14. 7 CFR 1001.61 - Computation of producer price differential.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Computation of producer price differential. 1001.61... MARKETING AREA Order Regulating Handling Producer Price Differential § 1001.61 Computation of producer price differential. For each month, the market administrator shall compute a producer price differential...

  15. 7 CFR 1124.61 - Computation of producer price differential.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Computation of producer price differential. 1124.61... NORTHWEST MARKETING AREA Order Regulating Handling Producer Price Differential § 1124.61 Computation of producer price differential. For each month the market administrator shall compute a producer...

  16. 7 CFR 1033.61 - Computation of producer price differential.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 9 2010-01-01 2009-01-01 true Computation of producer price differential. 1033.61... MARKETING AREA Order Regulating Handling Producer Price Differential § 1033.61 Computation of producer price differential. For each month the market administrator shall compute a producer price differential...

  17. NM WAIDS: A PRODUCED WATER QUALITY AND INFRASTRUCTURE GIS DATABASE FOR NEW MEXICO OIL PRODUCERS

    Energy Technology Data Exchange (ETDEWEB)

    Martha Cather; Robert Lee; Ibrahim Gundiler; Andrew Sung; Naomi Davidson; Ajeet Kumar Reddy; Mingzhen Wei

    2003-04-01

    The New Mexico Water and Infrastructure Data System (NM WAIDS) seeks to alleviate a number of produced water-related issues in southeast New Mexico. The project calls for the design and implementation of a Geographical Information System (GIS) and integral tools that will provide operators and regulators with necessary data and useful information to help them make management and regulatory decisions. The major components of this system are: (1) databases on produced water quality, cultural and groundwater data, oil pipeline and infrastructure data, and corrosion information, (2) a web site capable of displaying produced water and infrastructure data in a GIS or accessing some of the data by text-based queries, (3) a fuzzy logic-based, site risk assessment tool that can be used to assess the seriousness of a spill of produced water, and (4) a corrosion management toolkit that will provide operators with data and information on produced waters that will aid them in deciding how to address corrosion issues. The various parts of NM WAIDS will be integrated into a website with a user-friendly interface that will provide access to previously difficult-to-obtain data and information. Primary attention during the first six months of this project has been focused on creating the water quality databases for produced water and surface water, along with collection of corrosion information and building parts of the corrosion toolkit. Work on the project to date includes: (1) Creation of a water quality database for produced water analyses. The database was compiled from a variety of sources and currently has over 4000 entries for southeast New Mexico. (2) Creation of a web-based data entry system for the water quality database. This system allows a user to view, enter, or edit data from a web page rather than having to directly access the database. (3) Creation of a semi-automated data capturing system for use with standard water quality analysis forms. This system improves the

  18. NM WAIDS: A PRODUCED WATER QUALITY AND INFRASTRUCTURE GIS DATABASE FOR NEW MEXICO OIL PRODUCERS

    Energy Technology Data Exchange (ETDEWEB)

    Martha Cather; Robert Lee; Ibrahim Gundiler; Andrew Sung

    2003-09-24

    The New Mexico Water and Infrastructure Data System (NM WAIDS) seeks to alleviate a number of produced water-related issues in southeast New Mexico. The project calls for the design and implementation of a Geographical Information System (GIS) and integral tools that will provide operators and regulators with necessary data and useful information to help them make management and regulatory decisions. The major components of this system are: (1) Databases on produced water quality, cultural and groundwater data, oil pipeline and infrastructure data, and corrosion information. (2) A web site capable of displaying produced water and infrastructure data in a GIS or accessing some of the data by text-based queries. (3) A fuzzy logic-based, site risk assessment tool that can be used to assess the seriousness of a spill of produced water. (4) A corrosion management toolkit that will provide operators with data and information on produced waters that will aid them in deciding how to address corrosion issues. The various parts of NM WAIDS will be integrated into a website with a user-friendly interface that will provide access to previously difficult-to-obtain data and information. Primary attention during the first six months of this project was focused on creating the water quality databases for produced water and surface water, along with collecting of corrosion information and building parts of the corrosion toolkit. Work on the project to date includes: (1) Creation of a water quality database for produced water analyses. The database was compiled from a variety of sources and currently has over 7000 entries for New Mexico. (2) Creation of a web-based data entry system for the water quality database. This system allows a user to view, enter, or edit data from a web page rather than having to directly access the database. (3) Creation of a semi-automated data capturing system for use with standard water quality analysis forms. This system improves the accuracy and speed

  19. Produced water challenges : influence of production chemicals on flocculation

    OpenAIRE

    Zangaeva, Elmara

    2010-01-01

    Produced water is the largest volume waste from offshore oil and gas exploration and production processes. Water in varying quantities is always produced along with oil, and has to be separated from the oil. The quantity of “produced water” generally increases substantially with the age of the oil field. Produced water handling tactic depends on the composition of produced water, location, quantity and the availability of resources. This thesis describes practical, economical, technologica...

  20. Producing and scrounging during Problem Based Learning

    Directory of Open Access Journals (Sweden)

    William L. Vickery

    2013-08-01

    Full Text Available When problem based learning occurs in a social context it is open to a common social behaviour, scrounging. In the animal behaviour literature, scroungers do not attempt to find resources themselves but rather exploit resources found by other group members (referred to as producers. We know from studies of animal behaviour (including humans that scrounging can be expected whenever animals exploit resources in groups. We also know that scrounging can have deleterious effects on the group. We can expect scrounging to occur during social learning because the exchange of information (which I will consider here as a resource is essential to social learning. This exchange can be seen as each individual scrounging from the other members of the group whenever the individual learns from the work of others. However, there is a danger if some individuals learn mostly through their own efforts while others indulge in “social loafing” relying heavily on colleagues to provide knowledge. Here I propose that game theory models developed to analyse feeding in animal societies may also apply to social learning. We know from studies of birds feeding in groups that scrounging behaviour depends on the extent to which resources can be shared. Further, when scrounging is prevalent groups tend to obtain fewer resources. By contrast, in social learning we attempt to facilitate sharing of knowledge. We thus encourage scrounging and run the risk of reducing learning within study groups. Here I analyse the role of scrounging in problem based learning. I argue that scrounging is inherent and necessary to any social learning process. However, it can have perverse effects if the acquisition of facts rather than understanding comes to dominate learning objectives. Further, disparities among individuals within a group can lead certain individuals to specialise in scrounging thus undermining the functioning of the group. I suggest that motivation, problem structure

  1. Project INOVEMAR: Innovation in Sea Produce Processment

    Directory of Open Access Journals (Sweden)

    Maria Alberta Araújo

    2014-06-01

    these products into the market. Consequently, fishing communities will be able to sell all their produce, reducing waste, and increasing their economic situation.

  2. Microgravity Superagglomerates Produced By Silane And Acetylene

    Science.gov (United States)

    Gokoglu, Suleyman (Technical Monitor); Bundy, Matthew; Mulholland, George W.; Manzello, Samuel; Yang, Jiann; Scott, John Henry; Sivathanu, Yudaya

    2003-01-01

    The size of the agglomerates produced in the upper portion of a flame is important for a variety of applications. Soot particle size and density effect the amount of radiative heat transfer from a fire to its surroundings. Particle size determines the lifetime of smoke in a building or in the atmosphere, and exposure hazard for smoke inhaled and deposited in the lungs. The visibility through a smoke layer and dectectability of the smoke are also greatly affected by agglomerate size. Currently there is limited understanding of soot growth with an overall dimension of 10 m and larger. In the case of polystyrene, smoke agglomerates in excess of 1 mm have been observed raining out from large fires. Unlike hydrocarbon fuels, silane has the advantage that silica particles are the major combustion product resulting in a particle volume fraction a factor of ten greater than that for a carbonaceous smoke. There are two very desirable properties of silica aero-gels that are important for both space and earth based applications. The first important property is its inertness to most oxidizing and reducing atmospheres. Therefore, silica aero-gels make excellent fire ablatives and can be used in very demanding applications. The second important property is that silica aero-gels are expected to have very high porosity (greater than 0.999), making them lightweight and ideal for aerospace applications. The added benefit of the high porosity is that they can be used as extremely efficient filters for many earth based applications as well. Evidence of the formation of superagglomerates in a laminar acetylene/air diffusion flame was found by Sorensen et al. [1]. An interconnecting web of super-agglomerates was observed to span the width of the soot plume in the region just above the flame tip and described as a gel state. It was observed that this gel state immediately breaks up into agglomerates as larges as 100 m due to buoyancy induced turbulence. Large soot agglomerates were

  3. [The variance of melphalan doses related to kilogram of body weight and the consequences].

    Science.gov (United States)

    Vokurka, S

    2010-01-01

    Melphalan is an important cytotoxic drug. The empirical practice of body surface area-based (BSA) dosing (mg/m2) of melphalan has been critically analyzed in several observations. BSA-based dosing leads to significant variability in doses administered per kilogram of body weight (mg/kg), contributes to increased oral toxicity and probably does not have any significant effect on treatment results within equally BSA (mg/m2) dosed melphalan regimens.

  4. Dose-Related and Time-Dependent Development of Collagenase-Induced Tendinopathy in Rats.

    Science.gov (United States)

    Perucca Orfei, Carlotta; Lovati, Arianna B; Viganò, Marco; Stanco, Deborah; Bottagisio, Marta; Di Giancamillo, Alessia; Setti, Stefania; de Girolamo, Laura

    2016-01-01

    Tendinopathy is a big burden in clinics and it represents 45% of musculoskeletal lesions. Despite the relevant social impact, both pathogenesis and development of the tendinopathy are still under-investigated, thus limiting the therapeutic advancement in this field. The purpose of this study was to evaluate the dose-dependent and time-related tissue-level changes occurring in a collagenase-induced tendinopathy in rat Achilles tendons, in order to establish a standardized model for future pre-clinical studies. With this purpose, 40 Sprague Dawley rats were randomly divided into two groups, treated by injecting collagenase type I within the Achilles tendon at 1 mg/mL (low dose) or 3 mg/mL (high dose). Tendon explants were histologically evaluated at 3, 7, 15, 30 and 45 days. Our results revealed that both the collagenase doses induced a disorganization of collagen fibers and increased the number of rounded resident cells. In particular, the high dose treatment determined a greater neovascularization and fatty degeneration with respect to the lower dose. These changes were found to be time-dependent and to resemble the features of human tendinopathy. Indeed, in our series, the acute phase occurred from day 3 to day 15, and then progressed towards the proliferative phase from day 30 to day 45 displaying a degenerative appearance associated with a very precocious and mild remodeling process. The model represents a good balance between similarity with histological features of human tendinopathy and feasibility, in terms of tendon size to create lesions and costs when compared to other animal models. Moreover, this model could contribute to improve the knowledge in this field, and it could be useful to properly design further pre-clinical studies to test innovative treatments for tendinopathy.

  5. Cardiovascular protection of magnolol: cell-type specificity and dose-related effects

    Directory of Open Access Journals (Sweden)

    Ho Jennifer

    2012-07-01

    Full Text Available Abstract Magnolia officinalis has been widely used in traditional Chinese medicine. Magnolol, an active component isolated from Magnolia officinalis, is known to be a cardiovascular protector since 1994. The multiplex mechanisms of magnolol on cardiovascular protection depends on cell types and dosages, and will be reviewed and discussed in this article. Magnolol under low and moderate dosage possesses the ability to protect heart from ischemic/reperfusion injury, reduces atherosclerotic change, protects endothelial cell against apoptosis and inhibits neutrophil-endothelial adhesion. The moderate to high concentration of magnolol mainly acts on smooth muscle cells and platelets. Magnolol induces apoptosis in vascular smooth muscle cells at moderate concentration and inhibits proliferation at moderate and high concentration. High concentration of magnolol also abrogates platelet activation, aggregation and thrombus formation. Magnolol also serves as an smooth muscle relaxant only upon the high concentration. Oral intake of magnolol to reach the therapeutic level for cardiovascular protection is applicable, thus makes magnolol an agent of great potential for preventing cardiovascular diseases in high-risk patients.

  6. Dose-Related Differences in Effectiveness of Human Papillomavirus Vaccination Against Genital Warts

    DEFF Research Database (Denmark)

    Blomberg, Maria; Dehlendorff, Christian; Sand, Carsten

    2015-01-01

    BACKGROUND: Reducing the number of doses in the human papillomavirus (HPV) vaccination regimen from 3 to 2 could increase coverage rates. In this cohort study, we assessed the risk of genital warts (GWs) according to timing and number of doses of quadrivalent HPV vaccine. METHODS: From population...

  7. Dose-related effects of sericin on preadipocyte behavior within collagen/sericin hybrid scaffolds

    Institute of Scientific and Technical Information of China (English)

    Valentina Mitran; Madalina Georgiana Albu; Eugeniu Vasile; Anisoara Cimpean; Marieta Costache

    2015-01-01

    This paper aims at demonstrating the biocompatibility of recently developed 3D hydrogel scaffolds containing the same amount of collagen (COLL) and variable concentrations of sericin (SS) in order to find the most suitable formula for adipose tissue engineering (ATE) applications. These scaffolds were obtained by COLL crosslinking with glutaraldehyde followed by freeze-drying and, subsequently, seeded with 3T3-L1 preadipocytes. Scanning electron microscopy studies revealed the scaffolds' architecture and cellular colonization. Also, in vitro biocompatibility of the developed scaffolds was evaluated by LDH and MTT assays and Live/Dead analysis of 3T3-L1 preadipocyte populating these 3D matrices. The best results in terms of cell survival and proliferation status were obtained in the case of the hybrid COLL scaffold containing 40% SS (COLL–SS4). Furthermore, the biological performance of the analyzed COLL-based hydrogels at 5- and 8- days post-seeding was found to decrease as follows:COLL–SS4 4 COLL–SS2 4 COLL 4 COLL–SS6. Consequently, our study highlights that hybrid scaffolds obtained by the addition of variable concentrations of SS to a constant COLL composition positively influences the behavior of 3T3-L1 cells with the exception of the COLL–SS6 matrix (60%SS). Altogether, the data obtained recommend SS as a component of COLL-based hydrogels providing them with features that may be useful in ATE applications.

  8. Dose-Related and Time-Dependent Development of Collagenase-Induced Tendinopathy in Rats

    Science.gov (United States)

    Viganò, Marco; Stanco, Deborah; Bottagisio, Marta; Di Giancamillo, Alessia; Setti, Stefania; de Girolamo, Laura

    2016-01-01

    Tendinopathy is a big burden in clinics and it represents 45% of musculoskeletal lesions. Despite the relevant social impact, both pathogenesis and development of the tendinopathy are still under-investigated, thus limiting the therapeutic advancement in this field. The purpose of this study was to evaluate the dose-dependent and time-related tissue-level changes occurring in a collagenase-induced tendinopathy in rat Achilles tendons, in order to establish a standardized model for future pre-clinical studies. With this purpose, 40 Sprague Dawley rats were randomly divided into two groups, treated by injecting collagenase type I within the Achilles tendon at 1 mg/mL (low dose) or 3 mg/mL (high dose). Tendon explants were histologically evaluated at 3, 7, 15, 30 and 45 days. Our results revealed that both the collagenase doses induced a disorganization of collagen fibers and increased the number of rounded resident cells. In particular, the high dose treatment determined a greater neovascularization and fatty degeneration with respect to the lower dose. These changes were found to be time-dependent and to resemble the features of human tendinopathy. Indeed, in our series, the acute phase occurred from day 3 to day 15, and then progressed towards the proliferative phase from day 30 to day 45 displaying a degenerative appearance associated with a very precocious and mild remodeling process. The model represents a good balance between similarity with histological features of human tendinopathy and feasibility, in terms of tendon size to create lesions and costs when compared to other animal models. Moreover, this model could contribute to improve the knowledge in this field, and it could be useful to properly design further pre-clinical studies to test innovative treatments for tendinopathy. PMID:27548063

  9. A comparative study of evaluate dose related feto-maternal effects of syntocinon during labor

    Directory of Open Access Journals (Sweden)

    Farhin Radhanpuri

    2015-10-01

    Conclusions: There is significant reduction in the duration of labor by augmenting labor with slow low regulated dose of syntocinon drip, thus reducing the maternal exhaustion and morbidity due to prolonged labor. There is significant reduction in the operative interference like LSCS, vacuum and forceps delivery, thus reducing maternal morbidity associated with operative interference and anesthesia. It also reduces the cost of medical services. The incidence of fetal distress and LSCS for the same does not increase in the augmentation group, indicating that syntocinon can be safely used for the augmentation. At this time, much attention in the field of obstetrics is focused on attempting to reduce the rate of cesarean section, not only to reduce maternal morbidity, but to lower the cost of medical care. Our finding is that syntocinon administration can significantly reduce the cesarean section rate. [Int J Reprod Contracept Obstet Gynecol 2015; 4(5.000: 1344-1348

  10. Dietary Coleus forskohlii extract generates dose-related hepatotoxicity in mice.

    Science.gov (United States)

    Virgona, Nantiga; Taki, Yuko; Yamada, Shizuo; Umegaki, Keizo

    2013-09-01

    Coleus forskohlii root extract (CFE) represented by its bioactive constituent 'forskolin' is popularly used as a natural weight-lowering product, but the association of its use with liver-related risks is very limited. In the present study, the effect of standardized CFE with 10% forskolin on liver function of mice was examined. Mice were given 0-5% CFE in an AIN93G-based diet for 3-5 weeks. Food intake, body weights, relative organ weights and liver marker enzymes [aspartate aminotransferase (AST), alanine aminotransferase (ALT), and alkaline phosphatase (ALP)] combined with histophatological analysis were assessed. CFE (0-0.5%) only had minimal effects on food intake and body weight whereas a significant difference was observed in mice receiving the highest dose (5% CFE). The extract 0.05-5% dose-dependently decreased visceral fat weight by between 16% and 63%, and a dose-dependent several folds increase was observed in liver weights and plasma AST, ALT and ALP activities with quick onset apparent after only 1 week of 0.5% CFE intake. The hepatic effect persisted throughout the 3-weeks course but was restored towards normalization within 1 week after withdrawal of treatment. Liver histology of mice fed 0.5% CFE for 3 weeks showed hepatocyte hypertrophy and fat deposition. In contrast, none of the hepatic responses measured were altered when mice were given a diet containing pure forskolin alone at the dose corresponding to its content in 0.5% CFE. The present study clearly indicated that forskolin was not involved in the CFE-induced hepatotoxicity and was caused by other unidentified constituents in CFE which warrants further studies. Copyright © 2012 John Wiley & Sons, Ltd.

  11. Beta-Lactamase Producing Escherichia coli Isolates in Imported and Locally Produced Chicken Meat from Ghana

    DEFF Research Database (Denmark)

    Rasmussen, Mette Marie; Opintan, Japheth A; Frimodt-Møller, Niels

    2015-01-01

    whether imported chicken meat and meat from locally reared chicken are potential sources for human exposure to multi resistant Escherichia coli isolates. 188 samples from imported and locally produced chicken meat were sampled and analyzed. 153 bacteria isolates were successfully cultured and identified...... as E. coli using MALDI-ToF. Of these 109 isolates were from meat whereas the remaining 44 were isolated from the cloaca of locally reared live chickens. Antimicrobial susceptibility test was done on the identified E. coli isolates. Additionally, beta-lactamases production (ESBL and/or AmpC) were...... phenotypically confirmed on all isolates showing resistance to cefpodoxime. Beta-lactamase producing (BLP) E. coli meat isolates were further genotyped. Antimicrobial resistance to four antibiotic markers with highest resistance was detected more frequently in isolates from local chickens compared to imported...

  12. [Bioaugmentation of hydrogen producing bacteria on operation of bio-hydrogen producing reactor].

    Science.gov (United States)

    Qin, Zhi; Ren, Nan-qi; Li, Jian-zheng

    2007-12-01

    Hydrogen producing strain Ethanoligenens sp. B49 was inoculated into activated sludge of continuous stirred tank reactor (CSTR)to bioaugment hydrogen production. Hydrogen production capacities, compositions of fermentation products and pH value before and after bioaugmentation were investigated. When organic loading rate was 12 kg/(m3 x d), bioaugmentation of hydrogen producing strain enhanced hydrogen production rate and improved the composition of fermentation products significantly. After bioaugmentation, hydrogen production rate increased from 3.6 mmol/(kg x d) to 5.7 mmol/(kg x d), which was 1.5 times as that before bioaugmentation. Before bioaugmentation, average concentration of ethanol, acetic acid and propionic acid were 6.8 mmol/L, 5.3 mmol/L, 4.8 mmol/L respectively, while after bioaugmentation, those were 10.5 mmol/L, 7.5 mmol/L and 1.7 mmol/L respectively. Ethanol and acetic acid accounted for 86.8% in total fermentative products after bioaugmentation, while only 72% before bioaugmentation. pH value of effluent dropped from 4.5-4.7 to 4.3. Bioaugmentation of hydrogen producing strain is helpful to promote the formation of ethanol-type fermentation in low organic loading rate.

  13. Portfolio optimisation for hydropower producers that balances riverine ecosystem protection and producer needs

    Science.gov (United States)

    Yin, X. A.; Yang, Z. F.; Liu, C. L.

    2014-04-01

    In deregulated electricity markets, hydropower portfolio design has become an essential task for producers. The previous research on hydropower portfolio optimisation focused mainly on the maximisation of profits but did not take into account riverine ecosystem protection. Although profit maximisation is the major objective for producers in deregulated markets, protection of riverine ecosystems must be incorporated into the process of hydropower portfolio optimisation, especially against a background of increasing attention to environmental protection and stronger opposition to hydropower generation. This research seeks mainly to remind hydropower producers of the requirement of river protection when they design portfolios and help shift portfolio optimisation from economically oriented to ecologically friendly. We establish a framework to determine the optimal portfolio for a hydropower reservoir, accounting for both economic benefits and ecological needs. In this framework, the degree of natural flow regime alteration is adopted as a constraint on hydropower generation to protect riverine ecosystems, and the maximisation of mean annual revenue is set as the optimisation objective. The electricity volumes assigned in different electricity submarkets are optimised by the noisy genetic algorithm. The proposed framework is applied to China's Wangkuai Reservoir to test its effectiveness. The results show that the new framework could help to design eco-friendly portfolios that can ensure a planned profit and reduce alteration of the natural flow regime.

  14. Beta-Lactamase Producing Escherichia coli Isolates in Imported and Locally Produced Chicken Meat from Ghana.

    Science.gov (United States)

    Rasmussen, Mette Marie; Opintan, Japheth A; Frimodt-Møller, Niels; Styrishave, Bjarne

    2015-01-01

    The use of antibiotics in food animals is of public health concern, because resistant zoonotic pathogens can be transmitted to humans. Furthermore, global trade with food may rapidly spread multi-resistant pathogens between countries and even continents. The purpose of the study was to investigate whether imported chicken meat and meat from locally reared chicken are potential sources for human exposure to multi resistant Escherichia coli isolates. 188 samples from imported and locally produced chicken meat were sampled and analyzed. 153 bacteria isolates were successfully cultured and identified as E. coli using MALDI-ToF. Of these 109 isolates were from meat whereas the remaining 44 were isolated from the cloaca of locally reared live chickens. Antimicrobial susceptibility test was done on the identified E. coli isolates. Additionally, beta-lactamases production (ESBL and/or AmpC) were phenotypically confirmed on all isolates showing resistance to cefpodoxime. Beta-lactamase producing (BLP) E. coli meat isolates were further genotyped. Antimicrobial resistance to four antibiotic markers with highest resistance was detected more frequently in isolates from local chickens compared to imported chickens (tetracycline 88.9% vs. 57.5%, sulphonamide 75.0% vs. 46.6%, ampicillin 69.4% vs. 61.6% and trimethoprim 66.7% vs. 38.4%). Beta-lactamase production was found in 29 E. coli meat isolates, with 56.9% of them being multiple drug resistant (≥ 3). The predominant phylogroup identified was B1 followed by A and D, with similar distribution among the isolates from meat of locally reared chickens and imported chickens. Beta-lactamase producing genotype blaCTX-M-15 (50%; 10/20) was the most frequently drug resistant gene detected. More BLP E. coli isolates were found in imported chicken meat compared to locally reared chickens, demonstrating that these isolates may be spreading through food trade. In conclusion, both imported and locally produced chicken meats are potential

  15. Beta-Lactamase Producing Escherichia coli Isolates in Imported and Locally Produced Chicken Meat from Ghana.

    Directory of Open Access Journals (Sweden)

    Mette Marie Rasmussen

    Full Text Available The use of antibiotics in food animals is of public health concern, because resistant zoonotic pathogens can be transmitted to humans. Furthermore, global trade with food may rapidly spread multi-resistant pathogens between countries and even continents. The purpose of the study was to investigate whether imported chicken meat and meat from locally reared chicken are potential sources for human exposure to multi resistant Escherichia coli isolates. 188 samples from imported and locally produced chicken meat were sampled and analyzed. 153 bacteria isolates were successfully cultured and identified as E. coli using MALDI-ToF. Of these 109 isolates were from meat whereas the remaining 44 were isolated from the cloaca of locally reared live chickens. Antimicrobial susceptibility test was done on the identified E. coli isolates. Additionally, beta-lactamases production (ESBL and/or AmpC were phenotypically confirmed on all isolates showing resistance to cefpodoxime. Beta-lactamase producing (BLP E. coli meat isolates were further genotyped. Antimicrobial resistance to four antibiotic markers with highest resistance was detected more frequently in isolates from local chickens compared to imported chickens (tetracycline 88.9% vs. 57.5%, sulphonamide 75.0% vs. 46.6%, ampicillin 69.4% vs. 61.6% and trimethoprim 66.7% vs. 38.4%. Beta-lactamase production was found in 29 E. coli meat isolates, with 56.9% of them being multiple drug resistant (≥ 3. The predominant phylogroup identified was B1 followed by A and D, with similar distribution among the isolates from meat of locally reared chickens and imported chickens. Beta-lactamase producing genotype blaCTX-M-15 (50%; 10/20 was the most frequently drug resistant gene detected. More BLP E. coli isolates were found in imported chicken meat compared to locally reared chickens, demonstrating that these isolates may be spreading through food trade. In conclusion, both imported and locally produced chicken meats

  16. Changes in the quality of zobo beverages produced from Hibiscus ...

    African Journals Online (AJOL)

    SERVER

    2008-04-17

    Apr 17, 2008 ... Quality changes in zobo beverage produced from Hibiscus sabdarifa during storage and the ... Zobo drink, a non alcoholic local beverage is produced ..... treatment on the shelf life of fermented African oil bean seed (Ugbu),.

  17. AFSC/REFM: Bomb-produced age validation study

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Fish age validation with bomb-produced radiocarbon (14C) requires a known-age Delta14C reference chronology spanning the era of a marine increase in bomb-produced...

  18. Study on Spatial Evolution of Producer Service in Hangzhou City

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>1. Recent development in the study on producer serviceThe producer service refers to the service provided for production and business activities, instead of for individual consumers. As the mid-term input service, it

  19. Prevalence and antibiotic susceptibility pattern of ESBL producing ...

    African Journals Online (AJOL)

    Prevalence and antibiotic susceptibility pattern of ESBL producing ... desired along with functional antibiotic prescription policy to avoid treatment failures. Continuous surveillance for ESBL producing Klebsiellae and resistance monitoring are ...

  20. Exploration of Speech Planning and Producing by Speech Error Analysis

    Institute of Scientific and Technical Information of China (English)

    冷卉

    2012-01-01

    Speech error analysis is an indirect way to discover speech planning and producing processes. From some speech errors made by people in their daily life, linguists and learners can reveal the planning and producing processes more easily and clearly.

  1. Number of Producible and Service Well Bores on Federal Lands

    Data.gov (United States)

    Bureau of Land Management, Department of the Interior — This table contains the total number of producible well bores by state as of the end of each fiscal year. A well bore is considered producible if the well bore is...

  2. 7 CFR 1421.302 - Eligible producer and eligible land.

    Science.gov (United States)

    2010-01-01

    ... the 2008 Through 2012 Crop of Wheat, Barley, Oats, and Triticale § 1421.302 Eligible producer and... producer of wheat, barley, oats, or triticale in the 2008 through 2012 crop years. Also, to be an eligible... other eligible criteria for obtaining loan deficiency payments. (2) For producers of triticale...

  3. Can student-produced video transform university teaching?

    DEFF Research Database (Denmark)

    2011-01-01

    produced three types of videos during the course: Video 1 was independently produced by the students, guided by online tasks and instructions. These videos were student produced learning material, showing cases from all over Europe. The videos was collected and presented in a "visual database" in Google...

  4. 77 FR 9888 - Shiga Toxin-Producing Escherichia coli

    Science.gov (United States)

    2012-02-21

    ... Food Safety and Inspection Service Shiga Toxin-Producing Escherichia coli in Certain Raw Beef Products... manufacturing trimmings for six non-O157 Shiga toxin-producing Escherichia coli (STEC) serogroups (O26, O45..., non-intact product, that are contaminated with Shiga toxin-producing Escherichia coli (STEC) O26,...

  5. 7 CFR 1221.24 - Qualified sorghum producer organization.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Qualified sorghum producer organization. 1221.24... SORGHUM PROMOTION, RESEARCH, AND INFORMATION ORDER Sorghum Promotion, Research, and Information Order Definitions § 1221.24 Qualified sorghum producer organization. Qualified sorghum producer organization means...

  6. 7 CFR 932.129 - Nomination procedures for producer members.

    Science.gov (United States)

    2010-01-01

    ... producer wishes to participate shall be the producer's choice. (4) Any member of a producer's family (husband, wife, son or daughter) may vote on behalf of an owner-operated, landlord-tenant, family enterprise, or other farming unit. (5) Any authorized officer or employee of a corporation which is...

  7. 29 CFR 541.709 - Motion picture producing industry.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Motion picture producing industry. 541.709 Section 541.709... SALES EMPLOYEES Definitions and Miscellaneous Provisions § 541.709 Motion picture producing industry... motion picture producing industry who is compensated at a base rate of at least $695 a week (exclusive...

  8. Characterization of CTX-M-14-producing Escherichia coli from food-producing animals

    Directory of Open Access Journals (Sweden)

    Xiao-Ping eLiao

    2015-10-01

    Full Text Available Bacterial resistance to the third-generation cephalosporin antibiotics has become a major concern for public health. This study was aimed to determine the characteristics and distribution of blaCTX-M-14, which encodes an extended-spectrum β-lactamase, in E. coli isolated from Guangdong Province, China. A total of 979 E. coli isolates isolated from healthy or diseased food-producing animals including swine and avian were examined for blaCTX-M-14 and then the blaCTX-M-14 –positive isolates were detected by other resistance determinants (ESBLs, PMQR, rmtB and floR and analyzed by phylogenetic grouping analysis, PCR-based plasmid replicon typing, multilocus sequence typing and plasmid analysis. The genetic environments of blaCTX-M-14 were also determined by PCR. The results showed that fourteen CTX-M-14-producing E. coli were identified, belonging to groups A (7/14, B1 (4/14 and D (3/14. The most predominant resistance gene was blaTEM (n= 8, followed by floR (n=7, oqxA (n=3, aac(6’-1b-cr (n=2 and rmtB (n=1. Plasmids carrying blaCTX-M-14 were classified to IncK, IncHI2, IncHI1, IncN, IncFIB, IncF or IncI1, ranged from about 30kb to 200kb, and with insertion sequence of ISEcp1, IS26 or ORF513 located upstream and IS903 downstream of blaCTX-M-14. The result of MLST showed that 14 isolates had 11 STs, and the 11 STs belonged to 5 groups. Many of the identified STs are reported to be common in E. coli isolates associated with extraintestinal infections in humans, suggesting possible transmission of blaCTX-M-14 between animals and humans. The difference in the flanking sequences of blaCTX-M-14 between the 2009 isolates and the early ones suggests that the resistance gene context continues to evolve in E. coli of food producing animals.

  9. Factors affecting quality and safety of fresh-cut produce.

    Science.gov (United States)

    Francis, G A; Gallone, A; Nychas, G J; Sofos, J N; Colelli, G; Amodio, M L; Spano, G

    2012-01-01

    The quality of fresh-cut fruit and vegetable products includes a combination of attributes, such as appearance, texture, and flavor, as well as nutritional and safety aspects that determine their value to the consumer. Nutritionally, fruit and vegetables represent a good source of vitamins, minerals, and dietary fiber, and fresh-cut produce satisfies consumer demand for freshly prepared, convenient, healthy food. However, fresh-cut produce deteriorates faster than corresponding intact produce, as a result of damage caused by minimal processing, which accelerates many physiological changes that lead to a reduction in produce quality and shelf-life. The symptoms of produce deterioration include discoloration, increased oxidative browning at cut surfaces, flaccidity as a result of loss of water, and decreased nutritional value. Damaged plant tissues also represent a better substrate for growth of microorganisms, including spoilage microorganisms and foodborne pathogens. The risk of pathogen contamination and growth is one of the main safety concerns associated with fresh-cut produce, as highlighted by the increasing number of produce-linked foodborne outbreaks in recent years. The pathogens of major concern in fresh-cut produce are Listeria monocytogenes, pathogenic Escherichia coli mainly O157:H7, and Salmonella spp. This article describes the quality of fresh-cut produce, factors affecting quality, and various techniques for evaluating quality. In addition, the microbiological safety of fresh-cut produce and factors affecting pathogen survival and growth on fresh-cut produce are discussed in detail.

  10. New ochratoxin A producing species of Aspergillus section Circumdati

    DEFF Research Database (Denmark)

    Frisvad, Jens Christian; Frank, J.M.; Houbraken, J.A.M.P.

    2004-01-01

    Aspergillus section Circumdati contains species with yellow to ochre conidia and non-black sclerotia that produce at least one of the following extrolites: ochratoxins, penicillic acids, xanthomegnins or melleins. The exception to this is A. robustus, which produces black sclerotia, phototropic...... are described here, A. cretensis, A. flocculosus, A. neobridgeri, A. pseudoelegans, A. roseoglobulosus, A. steynii, and A. westerdijkiae. Twelve species of section Circumdati produce mellein, 17 produce penicillic acid and 17 produce xanthomegnins. Eight species consistently produce large amounts of ochratoxin...... A: Aspergillus cretensis, A. flocculosus, A. pseudoelegans, A. roseoglobulosus, A. westerdijkiae, A. sulphurous, and Neopetromyces muricatus. Two species produce large or small amounts of ochratoxin A, but less consistently: A. ochraceus and A. sclerotiorum. Ochratoxin production in these species...

  11. MIB-producing cyanobacteria (Planktothrix sp.) in a drinking water reservoir: distribution and odor producing potential.

    Science.gov (United States)

    Su, Ming; Yu, Jianwei; Zhang, Junzhi; Chen, Hui; An, Wei; Vogt, Rolf D; Andersen, Tom; Jia, Dongmin; Wang, Jingshi; Yang, Min

    2015-01-01

    The production of odorant 2-methylisoborneol (MIB) in water bodies by Planktothrix sp. have not been understood very well. Through a four-year investigation in Miyun Reservoir, a huge mesotrophic drinking water reservoir known to have the MIB episodes, we found that the Planktothrix sp. bloomed during September and October causing the high levels of MIB in the reservoir. The concentration of MIB and the biomass of MIB-producing cyanobacteria Planktothrix were measured (n = 887) at different sites and depths during different seasons. The results indicated that the shallow region of the reservoir is the major habitat for Planktothrix sp. due to that the light is able to penetrate down to the relatively high concentrations of nutrients close to the sediments. Quantile regression analysis between Planktothrix biomass and MIB concentration shows that the risk of MIB exceeding the odor threshold (15 ng L⁻¹) in water was as high as 90% when the Planktothrix density was more than 4.0 × 10⁵ cells L⁻¹, while the risk was reduced to 10% when the Planktothrix density remained below 1.6 × 10⁴ cells L⁻¹. This study will improve the understanding of the environmental behaviors of Planktothrix sp., and can provide useful information for better management of drinking water lakes/reservoirs experiencing the taste and odor (T&O) problems caused by deep living cyanobacterial species.

  12. Treatment of ASP produced water with hydrophilic fibre ball filtration

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The conventional treatment process cannot meet the need for treatment of produced water from alkaline/surfactant/polymer flooding( ASP produced water) in Daqing oilfield. In this study, a new type of hydrophilic fibre ball medium was developed through surface modification method. The hydrophilic property of the surface modified fibre ball was tested with ASP produced liquid at laboratory. The results showed that this fibre ball had higher oil degreasing efficiency. The surface components were also observed by Scanning Electron Microscope and X-ray Photoelectron Spectroscopy, the result showed that the hydrophilic fibre' s surface was covered by sulfonic group. Using hydrophilic fibre ball as filter medium, a new type of filter was designed to treat ASP produced water in pilot-scale experiments. The obtained results indicated that this type of filter had high capability and efficiency for the treatment of ASP produced water. This filter should have a better application prospect in oilfield produced water treatment.

  13. Small Producers and Retailers Network Supply Chains Integration

    OpenAIRE

    Milan Davidovic

    2010-01-01

    The retailers network with e-supplying system can be main sales channel for small local and regional producers and their supply chain. Small producers and retailers network supply chains integration based on modern supply chain management systems (SCM) reduce cost of coordination, increase efficiency and effectiveness of logistics and retail, and create long-term mutual benefit relationship between small producers and retailers in logistics and retailing, branding and their impact on sustain ...

  14. INTERNET CONNECTIVITY FOR MASS PRODUCED UNITS WITHOUT USER INTERFACE

    DEFF Research Database (Denmark)

    2000-01-01

    To the manufacturer of mass produced units without a user interface, typically field level units, connection of these units to a communications network for enabling servicing, control and trackability is of interest. To provide this connection, a solution is described in which an interface...... comprising an ASIC is built into a mass produced unit, whereby the ASIC is incorporating selected portions of selected layers of the Internet Protocol. The mass produced unit is then allocated a unit address....

  15. PERCEPTIONS OF MARKETING STRATEGIES: PRODUCERS VERSUS EXTENSION ECONOMISTS

    OpenAIRE

    Schroeder, Ted C.; Parcell, Joseph L.; Kastens, Terry L.; Dhuyvetter, Kevin C.

    1998-01-01

    Extension marketing economists commit substantial resources to outlook and market analysis. Producers demand this information and use it to make production and marketing decisions. This study analyzes responses to a marketing survey of producers and extension marketing economists to discern similarities and differences in their perceptions regarding market timing, futures market efficiency, and risk management. Producer and extension perceptions are consistent with regard to several marketing...

  16. Interfacial properties of dissolved crude oil components in produced water

    OpenAIRE

    Eftekhardadkhah, Mona

    2013-01-01

    Produced water is a mixture of water trapped in underground formations and injection water that is brought to the surface along with oil or gas. In general, produced water is a mixture of dispersed oil in water (o/w), dissolved organic compounds (including hydrocarbons), residual concentration of chemical additives from the production line, heavy metals, dissolved minerals and suspended solids.In the year 2011, 131 million m3 of produced water were discharged on the Norwegian Continental Shel...

  17. Biologically produced succinic acid: A new route to chemical intermediates

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The national laboratory consortium has undertaken an R&D project with the Michigan Biotechnology Institute (MBI) to demonstrate the feasibility of producing a chemical intermediate, succinic acid, and various derivatives, from renewable agricultural resources. The projects near-term goal is to demonstrate an economically competetive process for producing 1,4-butanediol and other derivatives from biologically produced succinic acid without generating a major salt waste. The competitiveness to the petrochemical process must be demonstrated.

  18. Small Producers and Retailers Network Supply Chains Integration

    OpenAIRE

    Milan Davidovic

    2010-01-01

    The retailers network with e-supplying system can be main sales channel for small local and regional producers and their supply chain. Small producers and retailers network supply chains integration based on modern supply chain management systems (SCM) reduce cost of coordination, increase efficiency and effectiveness of logistics and retail, and create long-term mutual benefit relationship between small producers and retailers in logistics and retailing, branding and their impact on sustain ...

  19. Underwater sound produced by individual drop impacts and rainfall

    DEFF Research Database (Denmark)

    Pumphrey, Hugh C.; Crum, L. A.; Jensen, Leif Bjørnø

    1989-01-01

    An experimental study of the underwater sound produced by water drop impacts on the surface is described. It is found that sound may be produced in two ways: first when the drop strikes the surface and, second, when a bubble is created in the water. The first process occurs for every drop......; the second occurs for some impacts but not others. A range of conditions is described in which a bubble is produced for every drop impact, and it is shown that these conditions are likely to be met by a significant fraction of the raindrops in a typical shower. Underwater sound produced by artificial as well...

  20. Selection and taxonomic identification of carotenoid-producing marine actinomycetes.

    Science.gov (United States)

    Romero, Francisco; Fernández-Chimeno, Rosa Isabel; de la Fuente, Juan Luis; Barredo, José-Luis

    2012-01-01

    Carotenoids are important pigments produced by plants and many microorganisms, including fungi, microalgae, cyanobacteria, and bacteria. Marine actinomycetes are a group of bacteria that produce a variety of metabolites with economic potential. Here, we describe a general method of selecting marine actinomycetes as carotenoids' producers. The screening is carried out at two levels: the first one involves a quick selection of strains by visual color inspection, and the second consists in the analysis of the extracts by HPLC. The taxonomic analysis of the producing strains gives us an overview of the groups of actinomycetes in which carotenoids can be found.